4817 files changed, 276210 insertions, 93774 deletions

diff --git a/Documentation/devicetree/bindings/.gitignore b/Documentation/devicetree/bindings/.gitignore
index ef82fcfcccab..a77719968a7e 100644
--- a/Documentation/devicetree/bindings/.gitignore
+++ b/Documentation/devicetree/bindings/.gitignore
@@ -1,2 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 *.example.dts
-processed-schema.yaml
+/processed-schema*.yaml
+/processed-schema*.json
diff --git a/Documentation/devicetree/bindings/.yamllint b/Documentation/devicetree/bindings/.yamllint
new file mode 100644
index 000000000000..214abd3ec440
--- /dev/null
+++ b/Documentation/devicetree/bindings/.yamllint
@@ -0,0 +1,39 @@
+extends: relaxed
+
+rules:
+  line-length:
+    # 80 chars should be enough, but don't fail if a line is longer
+    max: 110
+    allow-non-breakable-words: true
+    level: warning
+  braces:
+    min-spaces-inside: 0
+    max-spaces-inside: 1
+    min-spaces-inside-empty: 0
+    max-spaces-inside-empty: 0
+  brackets:
+    min-spaces-inside: 0
+    max-spaces-inside: 1
+    min-spaces-inside-empty: 0
+    max-spaces-inside-empty: 0
+  colons: {max-spaces-before: 0, max-spaces-after: 1}
+  commas: {min-spaces-after: 1, max-spaces-after: 1}
+  comments:
+    require-starting-space: false
+    min-spaces-from-content: 1
+  comments-indentation: disable
+  document-start:
+    present: true
+  empty-lines:
+    max: 3
+    max-end: 1
+  empty-values:
+    forbid-in-block-mappings: true
+    forbid-in-flow-mappings: true
+  hyphens:
+    max-spaces-after: 1
+  indentation:
+    spaces: 2
+    indent-sequences: true
+    check-multi-line-strings: false
+  trailing-spaces: false
diff --git a/Documentation/devicetree/bindings/ABI.rst b/Documentation/devicetree/bindings/ABI.rst
new file mode 100644
index 000000000000..a885713cf184
--- /dev/null
+++ b/Documentation/devicetree/bindings/ABI.rst
@@ -0,0 +1,42 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================
+Devicetree (DT) ABI
+===================
+
+I. Regarding stable bindings/ABI, we quote from the 2013 ARM mini-summit
+   summary document:
+
+     "That still leaves the question of, what does a stable binding look
+     like?  Certainly a stable binding means that a newer kernel will not
+     break on an older device tree, but that doesn't mean the binding is
+     frozen for all time. Grant said there are ways to change bindings that
+     don't result in breakage. For instance, if a new property is added,
+     then default to the previous behaviour if it is missing. If a binding
+     truly needs an incompatible change, then change the compatible string
+     at the same time.  The driver can bind against both the old and the
+     new. These guidelines aren't new, but they desperately need to be
+     documented."
+
+II.  General binding rules
+
+  1) Maintainers, don't let perfect be the enemy of good.  Don't hold up a
+     binding because it isn't perfect.
+
+  2) Use specific compatible strings so that if we need to add a feature (DMA)
+     in the future, we can create a new compatible string.  See I.
+
+  3) Bindings can be augmented, but the driver shouldn't break when given
+     the old binding. ie. add additional properties, but don't change the
+     meaning of an existing property. For drivers, default to the original
+     behaviour when a newly added property is missing.
+
+  4) Don't submit bindings for staging or unstable.  That will be decided by
+     the devicetree maintainers *after* discussion on the mailinglist.
+
+III. Notes
+
+  1) This document is intended as a general familiarization with the process as
+     decided at the 2013 Kernel Summit.  When in doubt, the current word of the
+     devicetree maintainers overrules this document.  In that situation, a patch
+     updating this document would be appreciated.
diff --git a/Documentation/devicetree/bindings/ABI.txt b/Documentation/devicetree/bindings/ABI.txt
deleted file mode 100644
index d25f8d379680..000000000000
--- a/Documentation/devicetree/bindings/ABI.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-
-  Devicetree (DT) ABI
-
-I. Regarding stable bindings/ABI, we quote from the 2013 ARM mini-summit
-   summary document:
-
-     "That still leaves the question of, what does a stable binding look
-     like?  Certainly a stable binding means that a newer kernel will not
-     break on an older device tree, but that doesn't mean the binding is
-     frozen for all time. Grant said there are ways to change bindings that
-     don't result in breakage. For instance, if a new property is added,
-     then default to the previous behaviour if it is missing. If a binding
-     truly needs an incompatible change, then change the compatible string
-     at the same time.  The driver can bind against both the old and the
-     new. These guidelines aren't new, but they desperately need to be
-     documented."
-
-II.  General binding rules
-
-  1) Maintainers, don't let perfect be the enemy of good.  Don't hold up a
-     binding because it isn't perfect.
-
-  2) Use specific compatible strings so that if we need to add a feature (DMA)
-     in the future, we can create a new compatible string.  See I.
-
-  3) Bindings can be augmented, but the driver shouldn't break when given
-     the old binding. ie. add additional properties, but don't change the
-     meaning of an existing property. For drivers, default to the original
-     behaviour when a newly added property is missing.
-
-  4) Don't submit bindings for staging or unstable.  That will be decided by
-     the devicetree maintainers *after* discussion on the mailinglist.
-
-III. Notes
-
-  1) This document is intended as a general familiarization with the process as
-     decided at the 2013 Kernel Summit.  When in doubt, the current word of the
-     devicetree maintainers overrules this document.  In that situation, a patch
-     updating this document would be appreciated.
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index 646cb3525373..bf2d8a8ced77 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -2,35 +2,79 @@
 DT_DOC_CHECKER ?= dt-doc-validate
 DT_EXTRACT_EX ?= dt-extract-example
 DT_MK_SCHEMA ?= dt-mk-schema
-DT_MK_SCHEMA_FLAGS := $(if $(DT_SCHEMA_FILES), -u)
 
-quiet_cmd_chk_binding = CHKDT   $(patsubst $(srctree)/%,%,$<)
-      cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \
-                        $(DT_EXTRACT_EX) $< > $@
+DT_SCHEMA_LINT = $(shell which yamllint || \
+  echo "warning: python package 'yamllint' not installed, skipping" >&2)
 
-$(obj)/%.example.dts: $(src)/%.yaml FORCE
-	$(call if_changed,chk_binding)
+DT_SCHEMA_MIN_VERSION = 2022.3
 
-DT_TMP_SCHEMA := processed-schema.yaml
+PHONY += check_dtschema_version
+check_dtschema_version:
+	@which $(DT_DOC_CHECKER) >/dev/null || \
+		{ echo "Error: '$(DT_DOC_CHECKER)' not found!" >&2; \
+		  echo "Ensure dtschema python package is installed and in your PATH." >&2; \
+		  echo "Current PATH is:" >&2; \
+		  echo "$$PATH" >&2; false; }
+	@{ echo $(DT_SCHEMA_MIN_VERSION); \
+	$(DT_DOC_CHECKER) --version 2>/dev/null || echo 0; } | sort -Vc >/dev/null || \
+	{ echo "ERROR: dtschema minimum version is v$(DT_SCHEMA_MIN_VERSION)" >&2; false; }
+
+quiet_cmd_extract_ex = DTEX    $@
+      cmd_extract_ex = $(DT_EXTRACT_EX) $< > $@
+
+$(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE
+	$(call if_changed,extract_ex)
+
+find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
+		-name 'processed-schema*' \)
+
+find_cmd = $(find_all_cmd) | grep -F "$(DT_SCHEMA_FILES)"
+CHK_DT_DOCS := $(shell $(find_cmd))
+
+quiet_cmd_yamllint = LINT    $(src)
+      cmd_yamllint = ($(find_cmd) | \
+                     xargs -n200 -P$$(nproc) \
+		     $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint >&2) || true
+
+quiet_cmd_chk_bindings = CHKDT   $@
+      cmd_chk_bindings = ($(find_cmd) | \
+                         xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(srctree)/$(src)) || true
 
 quiet_cmd_mk_schema = SCHEMA  $@
-      cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs)
+      cmd_mk_schema = f=$$(mktemp) ; \
+                      $(find_all_cmd) > $$f ; \
+                      $(DT_MK_SCHEMA) -j $(DT_MK_SCHEMA_FLAGS) @$$f > $@ ; \
+		      rm -f $$f
+
+define rule_chkdt
+	$(if $(DT_SCHEMA_LINT),$(call cmd,yamllint),)
+	$(call cmd,chk_bindings)
+	$(call cmd,mk_schema)
+endef
+
+DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_all_cmd)))
+
+override DTC_FLAGS := \
+	-Wno-avoid_unnecessary_addr_size \
+	-Wno-graph_child_address \
+	-Wno-interrupt_provider \
+	-Wno-unique_unit_address \
+	-Wunique_unit_address_if_enabled
 
-DT_DOCS = $(shell \
-	cd $(srctree)/$(src) && \
-	find * \( -name '*.yaml' ! \
-		-name $(DT_TMP_SCHEMA) ! \
-		-name '*.example.dt.yaml' \) \
-	)
+# Disable undocumented compatible checks until warning free
+override DT_CHECKER_FLAGS ?=
 
-DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS))
+$(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
+	$(call if_changed_rule,chkdt)
 
-ifeq ($(CHECK_DTBS),)
-extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
-extra-y += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
-endif
+always-y += processed-schema.json
+always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dts, $(CHK_DT_DOCS))
+always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dtb, $(CHK_DT_DOCS))
 
-$(obj)/$(DT_TMP_SCHEMA): $(DT_SCHEMA_FILES) FORCE
-	$(call if_changed,mk_schema)
+# Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
+# build artifacts here before they are processed by scripts/Makefile.clean
+clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \
+			-name '*.example.dtb' \) -delete 2>/dev/null)
 
-extra-y += $(DT_TMP_SCHEMA)
+dt_compatible_check: $(obj)/processed-schema.json
+	$(Q)$(srctree)/scripts/dtc/dt-extract-compatibles $(srctree) | xargs dt-check-compatible -v -s $<
diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml
index ace3fdaa8396..e012f612f039 100644
--- a/Documentation/devicetree/bindings/arm/actions.yaml
+++ b/Documentation/devicetree/bindings/arm/actions.yaml
@@ -4,13 +4,15 @@
 $id: http://devicetree.org/schemas/arm/actions.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Actions Semi platforms device tree bindings
+title: Actions Semi platforms
 
 maintainers:
   - Andreas Färber <afaerber@suse.de>
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     oneOf:
       # The Actions Semi S500 is a quad-core ARM Cortex-A9 SoC.
@@ -18,6 +20,12 @@ properties:
           - enum:
               - allo,sparky # Allo.com Sparky
               - cubietech,cubieboard6 # Cubietech CubieBoard6
+              - roseapplepi,roseapplepi # RoseapplePi.org RoseapplePi
+          - const: actions,s500
+      - items:
+          - enum:
+              - caninos,labrador-base-m # Labrador Base Board M v1
+          - const: caninos,labrador-v2  # Labrador Core v2
           - const: actions,s500
       - items:
           - enum:
@@ -28,6 +36,11 @@ properties:
       # The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC.
       - items:
           - enum:
+              - caninos,labrador-base-m2 # Labrador Base Board M v2
+          - const: caninos,labrador-v3   # Labrador Core v3
+          - const: actions,s700
+      - items:
+          - enum:
               - cubietech,cubieboard7 # Cubietech CubieBoard7
           - const: actions,s700
 
@@ -36,3 +49,5 @@ properties:
           - enum:
               - ucrobotics,bubblegum-96 # uCRobotics Bubblegum-96
           - const: actions,s900
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/airoha.yaml b/Documentation/devicetree/bindings/arm/airoha.yaml
new file mode 100644
index 000000000000..3292c669ee11
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/airoha.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/airoha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha SoC based Platforms
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <john@phrozen.org>
+
+description:
+  Boards with an Airoha SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - airoha,en7523-evb
+          - const: airoha,en7523
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/al,alpine.yaml b/Documentation/devicetree/bindings/arm/al,alpine.yaml
deleted file mode 100644
index a70dff277e05..000000000000
--- a/Documentation/devicetree/bindings/arm/al,alpine.yaml
+++ /dev/null
@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/al,alpine.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Annapurna Labs Alpine Platform Device Tree Bindings
-
-maintainers:
-  - Tsahee Zidenberg <tsahee@annapurnalabs.com>
-  - Antoine Tenart <antoine.tenart@bootlin.com>
-
-properties:
-  compatible:
-    items:
-      - const: al,alpine
-  model:
-    items:
-      - const: "Annapurna Labs Alpine Dev Board"
-
-...
diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml
index 49e0362ddc11..3eee03aa935c 100644
--- a/Documentation/devicetree/bindings/arm/altera.yaml
+++ b/Documentation/devicetree/bindings/arm/altera.yaml
@@ -4,17 +4,64 @@
 $id: http://devicetree.org/schemas/arm/altera.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Altera's SoCFPGA platform device tree bindings
+title: Altera's SoCFPGA platform
 
 maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
-    items:
-      - enum:
-        - altr,socfpga-cyclone5
-        - altr,socfpga-arria5
-        - altr,socfpga-arria10
-      - const: altr,socfpga
+    oneOf:
+      - description: Arria 5 boards
+        items:
+          - enum:
+              - altr,socfpga-arria5-socdk
+          - const: altr,socfpga-arria5
+          - const: altr,socfpga
+
+      - description: Arria 10 boards
+        items:
+          - enum:
+              - altr,socfpga-arria10-socdk
+          - const: altr,socfpga-arria10
+          - const: altr,socfpga
+
+      - description: Mercury+ AA1 boards
+        items:
+          - enum:
+              - google,chameleon-v3
+          - const: enclustra,mercury-aa1
+          - const: altr,socfpga-arria10
+          - const: altr,socfpga
+
+      - description: Cyclone 5 boards
+        items:
+          - enum:
+              - altr,socfpga-cyclone5-socdk
+              - denx,mcvevk
+              - ebv,socrates
+              - macnica,sodia
+              - novtech,chameleon96
+              - samtec,vining
+              - terasic,de0-atlas
+              - terasic,socfpga-cyclone5-sockit
+          - const: altr,socfpga-cyclone5
+          - const: altr,socfpga
+
+      - description: Stratix 10 boards
+        items:
+          - enum:
+              - altr,socfpga-stratix10-socdk
+              - altr,socfpga-stratix10-swvp
+          - const: altr,socfpga-stratix10
+
+      - description: SoCFPGA VT
+        items:
+          - const: altr,socfpga-vt
+          - const: altr,socfpga
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
index e4131fa42b26..572381306681 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
@@ -21,6 +21,8 @@ properties:
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     clkmgr@ffd04000 {
diff --git a/Documentation/devicetree/bindings/arm/amazon,al.yaml b/Documentation/devicetree/bindings/arm/amazon,al.yaml
new file mode 100644
index 000000000000..37dbb4768e5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amazon,al.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/amazon,al.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amazon's Annapurna Labs Alpine Platform
+
+maintainers:
+  - Hanna Hawa <hhhawa@amazon.com>
+  - Talel Shenhar <talel@amazon.com>, <talelshenhar@gmail.com>
+  - Ronen Krupnik <ronenk@amazon.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: Boards with Alpine V1 SoC
+        items:
+          - const: al,alpine
+
+      - description: Boards with Alpine V2 SoC
+        items:
+          - enum:
+              - al,alpine-v2-evp
+          - const: al,alpine-v2
+
+      - description: Boards with Alpine V3 SoC
+        items:
+          - enum:
+              - amazon,al-alpine-v3-evp
+          - const: amazon,al-alpine-v3
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt
deleted file mode 100644
index 5ab59da052df..000000000000
--- a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-System Control and Power Interface (SCPI) Message Protocol
-(in addition to the standard binding in [0])
-----------------------------------------------------------
-Required properties
-
-- compatible : should be "amlogic,meson-gxbb-scpi"
-
-AMLOGIC SRAM and Shared Memory for SCPI
-------------------------------------
-
-Required properties:
-- compatible : should be "amlogic,meson-gxbb-sram"
-
-Each sub-node represents the reserved area for SCPI.
-
-Required sub-node properties:
-- compatible : should be "amlogic,meson-gxbb-scp-shmem" for SRAM based shared
-		memory on Amlogic GXBB SoC.
-
-Sensor bindings for the sensors based on SCPI Message Protocol
---------------------------------------------------------------
-SCPI provides an API to access the various sensors on the SoC.
-
-Required properties:
-- compatible : should be "amlogic,meson-gxbb-scpi-sensors".
-
-[0] Documentation/devicetree/bindings/arm/arm,scpi.txt
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index f74aba48cec1..9fda2436c618 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/amlogic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amlogic MesonX device tree bindings
+title: Amlogic MesonX
 
 maintainers:
   - Kevin Hilman <khilman@baylibre.com>
@@ -17,7 +17,7 @@ description: |+
   any time. Be sure to use a device tree binary and a kernel image
   generated from the same source tree.
 
-  Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+  Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
   stable binding/ABI.
 
 properties:
@@ -86,6 +86,7 @@ properties:
           - enum:
               - amlogic,p281
               - oranth,tx3-mini
+              - jethome,jethub-j80
           - const: amlogic,s905w
           - const: amlogic,meson-gxl
 
@@ -96,6 +97,7 @@ properties:
               - hwacom,amazetv
               - khadas,vim
               - libretech,aml-s905x-cc
+              - libretech,aml-s905x-cc-v2
               - nexbox,a95x
           - const: amlogic,s905x
           - const: amlogic,meson-gxl
@@ -106,7 +108,10 @@ properties:
               - amlogic,p230
               - amlogic,p231
               - libretech,aml-s905d-pc
+              - osmc,vero4k-plus
               - phicomm,n1
+              - smartlabs,sml5442tw
+              - videostrong,gxl-kii-pro
           - const: amlogic,s905d
           - const: amlogic,meson-gxl
 
@@ -115,11 +120,15 @@ properties:
           - enum:
               - amlogic,q200
               - amlogic,q201
+              - azw,gt1-ultimate
               - khadas,vim2
               - kingnovel,r-box-pro
               - libretech,aml-s912-pc
+              - minix,neo-u9h
               - nexbox,a1
               - tronsmart,vega-s96
+              - videostrong,gxm-kiii-pro
+              - wetek,core2
           - const: amlogic,s912
           - const: amlogic,meson-gxm
 
@@ -127,6 +136,8 @@ properties:
         items:
           - enum:
               - amlogic,s400
+              - jethome,jethub-j100
+              - jethome,jethub-j110
           - const: amlogic,a113d
           - const: amlogic,meson-axg
 
@@ -135,6 +146,7 @@ properties:
           - enum:
               - amediatech,x96-max
               - amlogic,u200
+              - radxa,zero
               - seirobotics,sei510
           - const: amlogic,g12a
 
@@ -148,7 +160,11 @@ properties:
       - description: Boards with the Amlogic Meson G12B S922X SoC
         items:
           - enum:
+              - azw,gsking-x
+              - azw,gtking
+              - azw,gtking-pro
               - hardkernel,odroid-n2
+              - hardkernel,odroid-n2-plus
               - khadas,vim3
               - ugoos,am6
           - const: amlogic,s922x
@@ -157,8 +173,16 @@ properties:
       - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
         items:
           - enum:
-              - seirobotics,sei610
+              - amediatech,x96-air
+              - amediatech,x96-air-gbit
+              - bananapi,bpi-m5
+              - cyx,a95xf3-air
+              - cyx,a95xf3-air-gbit
+              - hardkernel,odroid-c4
+              - hardkernel,odroid-hc4
+              - haochuangyi,h96-max
               - khadas,vim3l
+              - seirobotics,sei610
           - const: amlogic,sm1
 
       - description: Boards with the Amlogic Meson A1 A113L SoC
@@ -166,4 +190,13 @@ properties:
           - enum:
               - amlogic,ad401
           - const: amlogic,a1
+
+      - description: Boards with the Amlogic Meson S4 S805X2 SoC
+        items:
+          - enum:
+              - amlogic,aq222
+          - const: amlogic,s4
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
index 853d7d2b56f5..1748f1605cc7 100644
--- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson Firmware registers Interface
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Meson SoCs have a register bank with status and data shared with the
@@ -25,7 +25,7 @@ select:
 
 properties:
   compatible:
-   items:
+    items:
       - const: amlogic,meson-gx-ao-secure
       - const: syscon
 
@@ -43,6 +43,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     ao-secure@140 {
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
new file mode 100644
index 000000000000..eee7cda9f91b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/amlogic/amlogic,meson-mx-secbus2.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson8/Meson8b/Meson8m2 SECBUS2 register interface
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+  The Meson8/Meson8b/Meson8m2 SoCs have a register bank called SECBUS2 which
+  contains registers for various IP blocks such as pin-controller bits for
+  the BSD_EN and TEST_N GPIOs as well as some AO ARC core control bits.
+  The registers can be accessed directly when not running in "secure mode".
+  When "secure mode" is enabled then these registers have to be accessed
+  through secure monitor calls.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson8-secbus2
+          - amlogic,meson8b-secbus2
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    secbus2: system-controller@4000 {
+      compatible = "amlogic,meson8-secbus2", "syscon";
+      reg = <0x4000 0x2000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/apple.yaml b/Documentation/devicetree/bindings/arm/apple.yaml
new file mode 100644
index 000000000000..7262f3c09867
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/apple.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/apple.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple ARM Machine
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  ARM platforms using SoCs designed by Apple Inc., branded "Apple Silicon".
+
+  This currently includes devices based on the "M1" SoC:
+
+  - Mac mini (M1, 2020)
+  - MacBook Pro (13-inch, M1, 2020)
+  - MacBook Air (M1, 2020)
+  - iMac (24-inch, M1, 2021)
+
+  And devices based on the "M1 Pro" and "M1 Max" SoCs:
+
+  - MacBook Pro (14-inch, M1 Pro, 2021)
+  - MacBook Pro (14-inch, M1 Max, 2021)
+  - MacBook Pro (16-inch, M1 Pro, 2021)
+  - MacBook Pro (16-inch, M1 Max, 2021)
+
+  The compatible property should follow this format:
+
+  compatible = "apple,<targettype>", "apple,<socid>", "apple,arm-platform";
+
+  <targettype> represents the board/device and comes from the `target-type`
+  property of the root node of the Apple Device Tree, lowercased. It can be
+  queried on macOS using the following command:
+
+  $ ioreg -d2 -l | grep target-type
+
+  <socid> is the lowercased SoC ID. Apple uses at least *five* different
+  names for their SoCs:
+
+  - Marketing name ("M1")
+  - Internal name ("H13G")
+  - Codename ("Tonga")
+  - SoC ID ("T8103")
+  - Package/IC part number ("APL1102")
+
+  Devicetrees should use the lowercased SoC ID, to avoid confusion if
+  multiple SoCs share the same marketing name. This can be obtained from
+  the `compatible` property of the arm-io node of the Apple Device Tree,
+  which can be queried as follows on macOS:
+
+  $ ioreg -n arm-io | grep compatible
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: Apple M1 SoC based platforms
+        items:
+          - enum:
+              - apple,j274 # Mac mini (M1, 2020)
+              - apple,j293 # MacBook Pro (13-inch, M1, 2020)
+              - apple,j313 # MacBook Air (M1, 2020)
+              - apple,j456 # iMac (24-inch, 4x USB-C, M1, 2021)
+              - apple,j457 # iMac (24-inch, 2x USB-C, M1, 2021)
+          - const: apple,t8103
+          - const: apple,arm-platform
+      - description: Apple M1 Pro SoC based platforms
+        items:
+          - enum:
+              - apple,j314s # MacBook Pro (14-inch, M1 Pro, 2021)
+              - apple,j316s # MacBook Pro (16-inch, M1 Pro, 2021)
+          - const: apple,t6000
+          - const: apple,arm-platform
+      - description: Apple M1 Max SoC based platforms
+        items:
+          - enum:
+              - apple,j314c # MacBook Pro (14-inch, M1 Max, 2021)
+              - apple,j316c # MacBook Pro (16-inch, M1 Max, 2021)
+          - const: apple,t6001
+          - const: apple,arm-platform
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
new file mode 100644
index 000000000000..0dc957a56d35
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/apple/apple,pmgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC Power Manager (PMGR)
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  Apple SoCs include PMGR blocks responsible for power management,
+  which can control various clocks, resets, power states, and
+  performance features. This node represents the PMGR as a syscon,
+  with sub-nodes representing individual features.
+
+properties:
+  $nodename:
+    pattern: "^power-management@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-pmgr
+          - apple,t6000-pmgr
+      - const: apple,pmgr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "power-controller@[0-9a-f]+$":
+    description:
+      The individual power management domains within this controller
+    type: object
+    $ref: /schemas/power/apple,pmgr-pwrstate.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        power-management@23b700000 {
+            compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x2 0x3b700000 0x0 0x14000>;
+
+            ps_sio: power-controller@1c0 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x1c0 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "sio";
+                apple,always-on;
+            };
+
+            ps_uart_p: power-controller@220 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x220 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "uart_p";
+                power-domains = <&ps_sio>;
+            };
+
+            ps_uart0: power-controller@270 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x270 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "uart0";
+                power-domains = <&ps_uart_p>;
+            };
+        };
+
+        power-management@23d280000 {
+            compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x2 0x3d280000 0x0 0xc000>;
+
+            ps_aop_filter: power-controller@4000 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4000 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_filter";
+            };
+
+            ps_aop_base: power-controller@4010 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4010 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_base";
+                power-domains = <&ps_aop_filter>;
+            };
+
+            ps_aop_shim: power-controller@4038 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4038 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_shim";
+                power-domains = <&ps_aop_base>;
+            };
+
+            ps_aop_uart0: power-controller@4048 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4048 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_uart0";
+                power-domains = <&ps_aop_shim>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/arm,cci-400.yaml b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml
new file mode 100644
index 000000000000..d28303d909e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml
@@ -0,0 +1,211 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,cci-400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM CCI Cache Coherent Interconnect
+
+maintainers:
+  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+
+description: >
+  ARM multi-cluster systems maintain intra-cluster coherency through a cache
+  coherent interconnect (CCI) that is capable of monitoring bus transactions
+  and manage coherency, TLB invalidations and memory barriers.
+
+  It allows snooping and distributed virtual memory message broadcast across
+  clusters, through memory mapped interface, with a global control register
+  space and multiple sets of interface control registers, one per slave
+  interface.
+
+properties:
+  $nodename:
+    pattern: "^cci(@[0-9a-f]+)?$"
+
+  compatible:
+    enum:
+      - arm,cci-400
+      - arm,cci-500
+      - arm,cci-550
+
+  reg:
+    maxItems: 1
+    description: >
+      Specifies base physical address of CCI control registers common to all
+      interfaces.
+
+  "#address-cells": true
+  "#size-cells": true
+  ranges: true
+
+patternProperties:
+  "^slave-if@[0-9a-f]+$":
+    type: object
+
+    properties:
+      compatible:
+        const: arm,cci-400-ctrl-if
+
+      interface-type:
+        enum:
+          - ace
+          - ace-lite
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - interface-type
+      - reg
+
+    additionalProperties: false
+
+  "^pmu@[0-9a-f]+$":
+    type: object
+
+    properties:
+      compatible:
+        oneOf:
+          - const: arm,cci-400-pmu,r0
+          - const: arm,cci-400-pmu,r1
+          - const: arm,cci-400-pmu
+            deprecated: true
+            description: >
+              Permitted only where OS has secure access to CCI registers
+          - const: arm,cci-500-pmu,r0
+          - const: arm,cci-550-pmu,r0
+
+      interrupts:
+        minItems: 1
+        maxItems: 8
+        description: >
+          List of counter overflow interrupts, one per counter. The interrupts
+          must be specified starting with the cycle counter overflow interrupt,
+          followed by counter0 overflow interrupt, counter1 overflow
+          interrupt,...  ,counterN overflow interrupt.
+
+          The CCI PMU has an interrupt signal for each counter. The number of
+          interrupts must be equal to the number of counters.
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - interrupts
+      - reg
+
+    additionalProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - ranges
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+      / {
+          #address-cells = <2>;
+          #size-cells = <2>;
+
+          compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
+          model = "V2P-CA15_CA7";
+          arm,hbi = <0x249>;
+          interrupt-parent = <&gic>;
+
+          gic: interrupt-controller {
+              interrupt-controller;
+              #interrupt-cells = <3>;
+          };
+
+          /*
+           * This CCI node corresponds to a CCI component whose control
+           * registers sits at address 0x000000002c090000.
+           *
+           * CCI slave interface @0x000000002c091000 is connected to dma
+           * controller dma0.
+           *
+           * CCI slave interface @0x000000002c094000 is connected to CPUs
+           * {CPU0, CPU1};
+           *
+           * CCI slave interface @0x000000002c095000 is connected to CPUs
+           * {CPU2, CPU3};
+           */
+
+          cpus {
+              #size-cells = <0>;
+              #address-cells = <1>;
+
+              CPU0: cpu@0 {
+                  device_type = "cpu";
+                  compatible = "arm,cortex-a15";
+                  cci-control-port = <&cci_control1>;
+                  reg = <0x0>;
+              };
+
+              CPU1: cpu@1 {
+                  device_type = "cpu";
+                  compatible = "arm,cortex-a15";
+                  cci-control-port = <&cci_control1>;
+                  reg = <0x1>;
+              };
+
+              CPU2: cpu@100 {
+                  device_type = "cpu";
+                  compatible = "arm,cortex-a7";
+                  cci-control-port = <&cci_control2>;
+                  reg = <0x100>;
+              };
+
+              CPU3: cpu@101 {
+                  device_type = "cpu";
+                  compatible = "arm,cortex-a7";
+                  cci-control-port = <&cci_control2>;
+                  reg = <0x101>;
+              };
+          };
+
+          cci@2c090000 {
+              compatible = "arm,cci-400";
+              #address-cells = <1>;
+              #size-cells = <1>;
+              reg = <0x0 0x2c090000 0 0x1000>;
+              ranges = <0x0 0x0 0x2c090000 0x10000>;
+
+              cci_control0: slave-if@1000 {
+                  compatible = "arm,cci-400-ctrl-if";
+                  interface-type = "ace-lite";
+                  reg = <0x1000 0x1000>;
+              };
+
+              cci_control1: slave-if@4000 {
+                  compatible = "arm,cci-400-ctrl-if";
+                  interface-type = "ace";
+                  reg = <0x4000 0x1000>;
+              };
+
+              cci_control2: slave-if@5000 {
+                  compatible = "arm,cci-400-ctrl-if";
+                  interface-type = "ace";
+                  reg = <0x5000 0x1000>;
+              };
+
+              pmu@9000 {
+                  compatible = "arm,cci-400-pmu";
+                  reg = <0x9000 0x5000>;
+                  interrupts = <0 101 4>,
+                    <0 102 4>,
+                    <0 103 4>,
+                    <0 104 4>,
+                    <0 105 4>;
+              };
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
new file mode 100644
index 000000000000..2bae06eed693
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-catu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Address Translation Unit (CATU)
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Address Translation Unit (CATU) translates addresses between an
+  AXI master and system memory. The CATU is normally used along with the TMC to
+  implement scattering of virtual trace buffers in physical memory. The CATU
+  translates contiguous Virtual Addresses (VAs) from an AXI master into
+  non-contiguous Physical Addresses (PAs) that are intended for system memory.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-catu
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-catu
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  interrupts:
+    maxItems: 1
+    description: Address translation error interrupt
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: AXI Slave connected to another Coresight component
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    catu@207e0000 {
+        compatible = "arm,coresight-catu", "arm,primecell";
+        reg = <0x207e0000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+
+        interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+        in-ports {
+            port {
+                catu_in_port: endpoint {
+                    remote-endpoint = <&etr_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
new file mode 100644
index 000000000000..0a6bc03ebe00
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-cpu-debug.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CoreSight CPU Debug Component
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight CPU debug component are compliant with the ARMv8 architecture
+  reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
+  external debug module is mainly used for two modes: self-hosted debug and
+  external debug, and it can be accessed from mmio region from Coresight and
+  eventually the debug module connects with CPU for debugging. And the debug
+  module provides sample-based profiling extension, which can be used to sample
+  CPU program counter, secure state and exception level, etc; usually every CPU
+  has one dedicated debug module to be connected.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-cpu-debug
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-cpu-debug
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  cpu:
+    description:
+      A phandle to the cpu this debug component is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle to the debug power domain if the debug logic has its own
+      dedicated power domain. CPU idle states may also need to be separately
+      constrained to keep CPU cores powered.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - cpu
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    debug@f6590000 {
+        compatible = "arm,coresight-cpu-debug", "arm,primecell";
+        reg = <0xf6590000 0x1000>;
+        clocks = <&sys_ctrl 1>;
+        clock-names = "apb_pclk";
+        cpu = <&cpu0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
new file mode 100644
index 000000000000..0c5b875cb654
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
@@ -0,0 +1,334 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-cti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Cross Trigger Interface (CTI) device.
+
+description: |
+  The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected
+  to one or more CoreSight components and/or a CPU, with CTIs interconnected in
+  a star topology via the Cross Trigger Matrix (CTM), which is not programmable.
+  The ECT components are not part of the trace generation data path and are thus
+  not part of the CoreSight graph.
+
+  The CTI component properties define the connections between the individual
+  CTI and the components it is directly connected to, consisting of input and
+  output hardware trigger signals. CTIs can have a maximum number of input and
+  output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The
+  number is defined at design time, the maximum of each defined in the DEVID
+  register.
+
+  CTIs are interconnected in a star topology via the CTM, using a number of
+  programmable channels, usually 4, but again implementation defined and
+  described in the DEVID register. The star topology is not required to be
+  described in the bindings as the actual connections are software
+  programmable.
+
+  In general the connections between CTI and components via the trigger signals
+  are implementation defined, except when the CTI is connected to an ARM v8
+  architecture core and optional ETM.
+
+  In this case the ARM v8 architecture defines the required signal connections
+  between CTI and the CPU core and ETM if present. In the case of a v8
+  architecturally connected CTI an additional compatible string is used to
+  indicate this feature (arm,coresight-cti-v8-arch).
+
+  When CTI trigger connection information is unavailable then a minimal driver
+  binding can be declared with no explicit trigger signals. This will result
+  the driver detecting the maximum available triggers and channels from the
+  DEVID register and make them all available for use as a single default
+  connection. Any user / client application will require additional information
+  on the connections between the CTI and other components for correct operation.
+  This information might be found by enabling the Integration Test registers in
+  the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel
+  configuration). These registers may be used to explore the trigger connections
+  between CTI and other CoreSight components.
+
+  Certain triggers between CoreSight devices and the CTI have specific types
+  and usages. These can be defined along with the signal indexes with the
+  constants defined in <dt-bindings/arm/coresight-cti-dt.h>
+
+  For example a CTI connected to a core will usually have a DBGREQ signal. This
+  is defined in the binding as type PE_EDBGREQ. These types will appear in an
+  optional array alongside the signal indexes. Omitting types will default all
+  signals to GEN_IO.
+
+  Note that some hardware trigger signals can be connected to non-CoreSight
+  components (e.g. UART etc) depending on hardware implementation.
+
+maintainers:
+  - Mike Leach <mike.leach@linaro.org>
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,coresight-cti
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^cti(@[0-9a-f]+)$"
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,coresight-cti
+          - const: arm,primecell
+      - items:
+          - const: arm,coresight-cti-v8-arch
+          - const: arm,coresight-cti
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  cpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Handle to cpu this device is associated with. This must appear in the
+      base cti node if compatible string arm,coresight-cti-v8-arch is used,
+      or may appear in a trig-conns child node when appropriate.
+
+  power-domains:
+    maxItems: 1
+
+  arm,cti-ctm-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the CTM this CTI is connected to, in large systems with multiple
+      separate CTI/CTM nets. Typically multi-socket systems where the CTM is
+      propagated between sockets.
+
+  arm,cs-dev-assoc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      defines a phandle reference to an associated CoreSight trace device.
+      When the associated trace device is enabled, then the respective CTI
+      will be enabled. Use in a trig-conns node, or in CTI base node when
+      compatible string arm,coresight-cti-v8-arch used. If the associated
+      device has not been registered then the node name will be stored as
+      the connection name for later resolution. If the associated device is
+      not a CoreSight device or not registered then the node name will remain
+      the connection name and automatic enabling will not occur.
+
+  # size cells and address cells required if trig-conns node present.
+  "#size-cells":
+    const: 0
+
+  "#address-cells":
+    const: 1
+
+patternProperties:
+  '^trig-conns@([0-9]+)$':
+    type: object
+    description:
+      A trigger connections child node which describes the trigger signals
+      between this CTI and another hardware device. This device may be a CPU,
+      CoreSight device, any other hardware device or simple external IO lines.
+      The connection may have both input and output triggers, or only one or the
+      other.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      arm,trig-in-sigs:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger in signal numbers in use by a trig-conns node.
+
+      arm,trig-in-types:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of constants representing the types for the CTI trigger in
+          signals. Types in this array match to the corresponding signal in the
+          arm,trig-in-sigs array. If the -types array is smaller, or omitted
+          completely, then the types will default to GEN_IO.
+
+      arm,trig-out-sigs:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger out signal numbers in use by a trig-conns node.
+
+      arm,trig-out-types:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of constants representing the types for the CTI trigger out
+          signals. Types in this array match to the corresponding signal
+          in the arm,trig-out-sigs array. If the "-types" array is smaller,
+          or omitted completely, then the types will default to GEN_IO.
+
+      arm,trig-filters:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger out signals that will be blocked from becoming
+          active, unless filtering is disabled on the driver.
+
+      arm,trig-conn-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          Defines a connection name that will be displayed, if the cpu or
+          arm,cs-dev-assoc properties are not being used in this connection.
+          Principle use for CTI that are connected to non-CoreSight devices, or
+          external IO.
+
+    anyOf:
+      - required:
+          - arm,trig-in-sigs
+      - required:
+          - arm,trig-out-sigs
+    oneOf:
+      - required:
+          - arm,trig-conn-name
+      - required:
+          - cpu
+      - required:
+          - arm,cs-dev-assoc
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-cti-v8-arch
+
+then:
+  required:
+    - cpu
+
+unevaluatedProperties: false
+
+examples:
+  # minimum CTI definition. DEVID register used to set number of triggers.
+  - |
+    cti@20020000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x20020000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+    };
+  #  v8 architecturally defined CTI - CPU + ETM connections generated by the
+  #  driver according to the v8 architecture specification.
+  - |
+    cti@859000 {
+      compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+                   "arm,primecell";
+      reg = <0x859000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      cpu = <&CPU1>;
+      arm,cs-dev-assoc = <&etm1>;
+    };
+  # Implementation defined CTI - CPU + ETM connections explicitly defined..
+  # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h
+  # #size-cells and #address-cells are required if trig-conns@ nodes present.
+  - |
+    #include <dt-bindings/arm/coresight-cti-dt.h>
+
+    cti@858000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x858000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      arm,cti-ctm-id = <1>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      trig-conns@0 {
+            reg = <0>;
+            arm,trig-in-sigs = <4 5 6 7>;
+            arm,trig-in-types = <ETM_EXTOUT
+                                 ETM_EXTOUT
+                                 ETM_EXTOUT
+                                 ETM_EXTOUT>;
+            arm,trig-out-sigs = <4 5 6 7>;
+            arm,trig-out-types = <ETM_EXTIN
+                                  ETM_EXTIN
+                                  ETM_EXTIN
+                                  ETM_EXTIN>;
+            arm,cs-dev-assoc = <&etm0>;
+      };
+
+      trig-conns@1 {
+            reg = <1>;
+            cpu = <&CPU0>;
+            arm,trig-in-sigs = <0 1>;
+            arm,trig-in-types = <PE_DBGTRIGGER
+                                 PE_PMUIRQ>;
+            arm,trig-out-sigs=<0 1 2 >;
+            arm,trig-out-types = <PE_EDBGREQ
+                                  PE_DBGRESTART
+                                  PE_CTIIRQ>;
+
+            arm,trig-filters = <0>;
+      };
+    };
+  # Implementation defined CTI - non CoreSight component connections.
+  - |
+    cti@20110000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x20110000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      trig-conns@0 {
+        reg = <0>;
+        arm,trig-in-sigs=<0>;
+        arm,trig-in-types=<GEN_INTREQ>;
+        arm,trig-out-sigs=<0>;
+        arm,trig-out-types=<GEN_HALTREQ>;
+        arm,trig-conn-name = "sys_profiler";
+      };
+
+      trig-conns@1 {
+        reg = <1>;
+        arm,trig-out-sigs=<2 3>;
+        arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-conn-name = "watchdog";
+      };
+
+      trig-conns@2 {
+        reg = <2>;
+        arm,trig-in-sigs=<1 6>;
+        arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-conn-name = "g_counter";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
new file mode 100644
index 000000000000..44a1041cb0fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-funnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Programmable Trace Bus Funnel
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight funnel merges 2-8 trace sources into a single trace
+  stream with programmable enable and priority of input ports.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-dynamic-funnel
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-dynamic-funnel
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port(@[0-7])?$':
+        description: Input connections from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    funnel@20040000 {
+        compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+        reg = <0x20040000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                funnel_out_port0: endpoint {
+                    remote-endpoint = <&replicator_in_port0>;
+                };
+            };
+        };
+
+        in-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                funnel_in_port0: endpoint {
+                    remote-endpoint = <&ptm0_out_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                funnel_in_port1: endpoint {
+                    remote-endpoint = <&ptm1_out_port>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                funnel_in_port2: endpoint {
+                    remote-endpoint = <&etm0_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
new file mode 100644
index 000000000000..03792e9bd97a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-replicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Programmable Trace Bus Replicator
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight replicator splits a single trace stream into two trace streams
+  for systems that have more than one trace sink component.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-dynamic-replicator
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-dynamic-replicator
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  qcom,replicator-loses-context:
+    type: boolean
+    description:
+      Indicates that the replicator will lose register context when AMBA clock
+      is removed which is observed in some replicator designs.
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port(@[01])?$':
+        description: Output connections to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    replicator@20120000 {
+        compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+        reg = <0x20120000 0x1000>;
+
+        clocks = <&soc_smc50mhz>;
+        clock-names = "apb_pclk";
+
+        out-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* replicator output ports */
+            port@0 {
+                reg = <0>;
+                replicator_out_port0: endpoint {
+                    remote-endpoint = <&tpiu_in_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                replicator_out_port1: endpoint {
+                    remote-endpoint = <&etr_in_port>;
+                };
+            };
+        };
+        in-ports {
+            port {
+                replicator_in_port0: endpoint {
+                    remote-endpoint = <&csys2_funnel_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
new file mode 100644
index 000000000000..90679788e0bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-etb10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Embedded Trace Buffer
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Embedded Trace Buffer stores traces in a dedicated SRAM that is
+  used as a circular buffer.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-etb10
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-etb10
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    etb@20010000 {
+        compatible = "arm,coresight-etb10", "arm,primecell";
+        reg = <0x20010000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                etb_in_port: endpoint {
+                    remote-endpoint = <&replicator_out_port0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
new file mode 100644
index 000000000000..01200f67504a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-etm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Embedded Trace MacroCell
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Embedded Trace Macrocell (ETM) is a real-time trace module providing
+  instruction and data tracing of a processor.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,coresight-etm3x
+          - arm,coresight-etm4x
+          - arm,coresight-etm4x-sysreg
+  required:
+    - compatible
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: arm,coresight-etm4x-sysreg
+    then:
+      $ref: /schemas/arm/primecell.yaml#
+      required:
+        - reg
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Embedded Trace Macrocell with memory mapped access.
+        items:
+          - enum:
+              - arm,coresight-etm3x
+              - arm,coresight-etm4x
+          - const: arm,primecell
+      - description:
+          Embedded Trace Macrocell (version 4.x), with system register access only
+        const: arm,coresight-etm4x-sysreg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  arm,coresight-loses-context-with-cpu:
+    type: boolean
+    description:
+      Indicates that the hardware will lose register context on CPU power down
+      (e.g. CPUIdle). An example of where this may be needed are systems which
+      contain a coresight component and CPU in the same power domain. When the
+      CPU powers down the coresight component also powers down and loses its
+      context.
+
+  arm,cp14:
+    type: boolean
+    description:
+      Must be present if the system accesses ETM/PTM management registers via
+      co-processor 14.
+
+  qcom,skip-power-up:
+    type: boolean
+    description:
+      Indicates that an implementation can skip powering up the trace unit.
+      TRCPDCR.PU does not have to be set on Qualcomm Technologies Inc. systems
+      since ETMs are in the same power domain as their CPU cores. This property
+      is required to identify such systems with hardware errata where the CPU
+      watchdog counter is stopped when TRCPDCR.PU is set.
+
+  cpu:
+    description:
+      phandle to the cpu this ETM is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection from the ETM to CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - cpu
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ptm@2201c000 {
+        compatible = "arm,coresight-etm3x", "arm,primecell";
+        reg = <0x2201c000 0x1000>;
+
+        cpu = <&cpu0>;
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                ptm0_out_port: endpoint {
+                    remote-endpoint = <&funnel_in_port0>;
+                };
+            };
+        };
+    };
+
+    ptm@2201d000 {
+        compatible = "arm,coresight-etm3x", "arm,primecell";
+        reg = <0x2201d000 0x1000>;
+
+        cpu = <&cpu1>;
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                ptm1_out_port: endpoint {
+                    remote-endpoint = <&funnel_in_port1>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
new file mode 100644
index 000000000000..cc8c3baa79b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-static-funnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Static Trace Bus Funnel
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight static funnel merges 2-8 trace sources into a single trace
+  stream.
+
+properties:
+  compatible:
+    const: arm,coresight-static-funnel
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@[0-7]$':
+        description: Input connections from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    funnel {
+        /*
+         * non-configurable replicators don't show up on the
+         * AMBA bus.  As such no need to add "arm,primecell".
+         */
+        compatible = "arm,coresight-static-funnel";
+
+        out-ports {
+            port {
+                combo_funnel_out: endpoint {
+                    remote-endpoint = <&top_funnel_in>;
+                };
+            };
+        };
+
+        in-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                combo_funnel_in0: endpoint {
+                    remote-endpoint = <&cluster0_etf_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                combo_funnel_in1: endpoint {
+                    remote-endpoint = <&cluster1_etf_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
new file mode 100644
index 000000000000..1892a091ac35
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-static-replicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Static Trace Bus Replicator
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight replicator splits a single trace stream into two trace streams
+  for systems that have more than one trace sink component.
+
+properties:
+  compatible:
+    const: arm,coresight-static-replicator
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@[01]$':
+        description: Output connections to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    replicator {
+        /*
+         * non-configurable replicators don't show up on the
+         * AMBA bus.  As such no need to add "arm,primecell".
+         */
+        compatible = "arm,coresight-static-replicator";
+
+        out-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* replicator output ports */
+            port@0 {
+                reg = <0>;
+                replicator_out_port0: endpoint {
+                    remote-endpoint = <&etb_in_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                replicator_out_port1: endpoint {
+                    remote-endpoint = <&tpiu_in_port>;
+                };
+            };
+        };
+
+        in-ports {
+            port {
+                replicator_in_port0: endpoint {
+                    remote-endpoint = <&funnel_out_port0>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
new file mode 100644
index 000000000000..378380c3f5aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-stm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight System Trace MacroCell
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The STM is a trace source that is integrated into a CoreSight system, designed
+  primarily for high-bandwidth trace of instrumentation embedded into software.
+  This instrumentation is made up of memory-mapped writes to the STM Advanced
+  eXtensible Interface (AXI) slave, which carry information about the behavior
+  of the software.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-stm
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-stm
+      - const: arm,primecell
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: stm-base
+      - const: stm-stimulus-base
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    stm@20100000 {
+        compatible = "arm,coresight-stm", "arm,primecell";
+        reg = <0x20100000 0x1000>,
+              <0x28000000 0x180000>;
+        reg-names = "stm-base", "stm-stimulus-base";
+
+        clocks = <&soc_smc50mhz>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                stm_out_port: endpoint {
+                    remote-endpoint = <&main_funnel_in_port2>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
new file mode 100644
index 000000000000..cb8dceaca70e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Trace Memory Controller
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  Trace Memory Controller is used for Embedded Trace Buffer(ETB), Embedded Trace
+  FIFO(ETF) and Embedded Trace Router(ETR) configurations. The configuration
+  mode (ETB, ETF, ETR) is discovered at boot time when the device is probed.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-tmc
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-tmc
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  arm,buffer-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Size of contiguous buffer space for TMC ETR (embedded trace router). The
+      buffer size can be configured dynamically via buffer_size property in
+      sysfs instead.
+
+  arm,scatter-gather:
+    type: boolean
+    description:
+      Indicates that the TMC-ETR can safely use the SG mode on this system.
+
+  arm,max-burst-size:
+    description:
+      The maximum burst size initiated by TMC on the AXI master interface. The
+      burst size can be in the range [0..15], the setting supports one data
+      transfer per burst up to a maximum of 16 data transfers per burst.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: AXI or ATB Master output connection. Used for ETR
+          and ETF configurations.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    etr@20070000 {
+        compatible = "arm,coresight-tmc", "arm,primecell";
+        reg = <0x20070000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                etr_in_port: endpoint {
+                    remote-endpoint = <&replicator2_out_port0>;
+                };
+            };
+        };
+
+        out-ports {
+            port {
+                etr_out_port: endpoint {
+                    remote-endpoint = <&catu_in_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
new file mode 100644
index 000000000000..61a0cdc27745
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-tpiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Trace Port Interface Unit
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Trace Port Interface Unit captures trace data from the trace bus
+  and outputs it to an external trace port.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-tpiu
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-tpiu
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    tpiu@e3c05000 {
+        compatible = "arm,coresight-tpiu", "arm,primecell";
+        reg = <0xe3c05000 0x1000>;
+
+        clocks = <&clk_375m>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                tpiu_in_port: endpoint {
+                    remote-endpoint = <&funnel4_out_port0>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml
new file mode 100644
index 000000000000..693f3fe7be60
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,corstone1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Corstone1000
+
+maintainers:
+  - Vishnu Banavath <vishnu.banavath@arm.com>
+  - Rui Miguel Silva <rui.silva@linaro.org>
+
+description: |+
+  ARM's Corstone1000 includes pre-verified Corstone SSE-710 subsystem that
+  provides a flexible compute architecture that combines Cortex‑A and Cortex‑M
+  processors.
+
+  Support for Cortex‑A32, Cortex‑A35 and Cortex‑A53 processors. Two expansion
+  systems for M-Class (or other) processors for adding sensors, connectivity,
+  video, audio and machine learning at the edge System and security IPs to build
+  a secure SoC for a range of rich IoT applications, for example gateways, smart
+  cameras and embedded systems.
+
+  Integrated Secure Enclave providing hardware Root of Trust and supporting
+  seamless integration of the optional CryptoCell™-312 cryptographic
+  accelerator.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Corstone1000 MPS3 it has 1 Cortex-A35 CPU core in a FPGA
+          implementation of the Corstone1000 in the MPS3 prototyping board. See
+          ARM document DAI0550.
+        items:
+          - const: arm,corstone1000-mps3
+      - description: Corstone1000 FVP is the Fixed Virtual Platform
+          implementation of this system. See ARM ecosystems FVP's.
+        items:
+          - const: arm,corstone1000-fvp
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
new file mode 100644
index 000000000000..108460627d9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright 2021, Arm Ltd
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/arm,embedded-trace-extension.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ARM Embedded Trace Extensions
+
+maintainers:
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+
+description: |
+  Arm Embedded Trace Extension(ETE) is a per CPU trace component that
+  allows tracing the CPU execution. It overlaps with the CoreSight ETMv4
+  architecture and has extended support for future architecture changes.
+  The trace generated by the ETE could be stored via legacy CoreSight
+  components (e.g, TMC-ETR) or other means (e.g, using a per CPU buffer
+  Arm Trace Buffer Extension (TRBE)). Since the ETE can be connected to
+  legacy CoreSight components, a node must be listed per instance, along
+  with any optional connection graph as per the coresight bindings.
+
+properties:
+  $nodename:
+    pattern: "^ete([0-9a-f]+)$"
+  compatible:
+    items:
+      - const: arm,embedded-trace-extension
+
+  cpu:
+    description: |
+      Handle to the cpu this ETE is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+
+  out-ports:
+    description: |
+      Output connections from the ETE to legacy CoreSight trace bus.
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port:
+        description: Output connection from the ETE to legacy CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - cpu
+
+additionalProperties: false
+
+examples:
+
+# An ETE node without legacy CoreSight connections
+  - |
+    ete0 {
+      compatible = "arm,embedded-trace-extension";
+      cpu = <&cpu_0>;
+    };
+# An ETE node with legacy CoreSight connections
+  - |
+   ete1 {
+      compatible = "arm,embedded-trace-extension";
+      cpu = <&cpu_1>;
+
+      out-ports {        /* legacy coresight connection */
+         port {
+             ete1_out_port: endpoint {
+                remote-endpoint = <&funnel_in_port0>;
+             };
+         };
+      };
+   };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
new file mode 100644
index 000000000000..98ff5698ae1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,integrator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Integrator Boards
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  These were the first ARM platforms officially supported by ARM Ltd.
+  They are ARMv4, ARMv5 and ARMv6-capable using different core tiles,
+  so the system is modular and can host a variety of CPU tiles called
+  "core tiles" and referred to in the device tree as "core modules".
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: ARM Integrator Application Platform, this board has a PCI
+          host and several PCI slots, as well as a number of slots for logical
+          expansion modules, it is referred to as an "ASIC Development
+          Motherboard" and is extended with custom FPGA and is intended for
+          rapid prototyping. See ARM DUI 0098B. This board can physically come
+          pre-packaged in a PC Tower form factor called Integrator/PP1 or a
+          special metal fixture called Integrator/PP2, see ARM DUI 0169A.
+        items:
+          - const: arm,integrator-ap
+      - description: ARM Integrator Compact Platform (HBI-0086), this board has
+          a compact form factor and mainly consists of the bare minimum
+          peripherals to make use of the core module. See ARM DUI 0159B.
+        items:
+          - const: arm,integrator-cp
+      - description: ARM Integrator Standard Development Board (SDB) Platform,
+          this board is a PCI-based board conforming to the Microsoft SDB
+          (HARP) specification. See ARM DUI 0099A.
+        items:
+          - const: arm,integrator-sp
+
+  core-module@10000000:
+    type: object
+    description: the root node in the Integrator platforms must contain
+      a core module child node. They are always at physical address
+      0x10000000 in all the Integrator variants.
+    properties:
+      compatible:
+        items:
+          - const: arm,core-module-integrator
+          - const: syscon
+          - const: simple-mfd
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+patternProperties:
+  "^syscon@[0-9a-f]+$":
+    description: All Integrator boards must provide a system controller as a
+      node in the root of the device tree.
+    type: object
+    properties:
+      compatible:
+        items:
+          - enum:
+              - arm,integrator-ap-syscon
+              - arm,integrator-cp-syscon
+              - arm,integrator-sp-syscon
+          - const: syscon
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+
+required:
+  - compatible
+  - core-module@10000000
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml
new file mode 100644
index 000000000000..8d3ed2e4ed31
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,realview.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM RealView Boards
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  The ARM RealView series of reference designs were built to explore the ARM
+  11, Cortex A-8 and Cortex A-9 CPUs. This included new features compared to
+  the earlier CPUs such as TrustZone and multicore (MPCore).
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: ARM RealView Emulation Baseboard (HBI-0140) was created
+          as a generic platform to test different FPGA designs, and has
+          pluggable CPU modules, see ARM DUI 0303E.
+        items:
+          - const: arm,realview-eb
+      - description: ARM RealView Platform Baseboard for ARM1176JZF-S
+          (HBI-0147) was created as a development board to test ARM TrustZone,
+          CoreSight and Intelligent Energy Management (IEM) see ARM DUI 0425F.
+        items:
+          - const: arm,realview-pb1176
+      - description: ARM RealView Platform Baseboard for ARM 11 MPCore
+          (HBI-0159, HBI-0175 and HBI-0176) was created to showcase
+          multiprocessing with ARM11 using MPCore using symmetric
+          multiprocessing (SMP). See ARM DUI 0351E.
+        items:
+          - const: arm,realview-pb11mp
+      - description: ARM RealView Platform Baseboard for Cortex-A8 (HBI-0178,
+          HBI-0176 and HBI-0175) was the first reference platform for the
+          Cortex CPU family, including a Cortex-A8 test chip.
+        items:
+          - const: arm,realview-pba8
+      - description: ARM RealView Platform Baseboard Explore for Cortex-A9
+          (HBI-0182 and HBI-0183) was the reference platform for the Cortex-A9
+          CPU.
+        items:
+          - const: arm,realview-pbx
+
+  soc:
+    description: All RealView boards must provide a soc node in the root of the
+      device tree, representing the System-on-Chip since these test chips are
+      rather complex.
+    type: object
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: arm,realview-eb-soc
+              - const: simple-bus
+          - items:
+              - const: arm,realview-pb1176-soc
+              - const: simple-bus
+          - items:
+              - const: arm,realview-pb11mp-soc
+              - const: simple-bus
+          - items:
+              - const: arm,realview-pba8-soc
+              - const: simple-bus
+          - items:
+              - const: arm,realview-pbx-soc
+              - const: simple-bus
+
+    patternProperties:
+      "^.*syscon@[0-9a-f]+$":
+        type: object
+        description: All RealView boards must provide a syscon system controller
+          node inside the soc node.
+        properties:
+          compatible:
+            oneOf:
+              - items:
+                  - const: arm,realview-eb11mp-revb-syscon
+                  - const: arm,realview-eb-syscon
+                  - const: syscon
+                  - const: simple-mfd
+              - items:
+                  - const: arm,realview-eb11mp-revc-syscon
+                  - const: arm,realview-eb-syscon
+                  - const: syscon
+                  - const: simple-mfd
+              - items:
+                  - const: arm,realview-eb-syscon
+                  - const: syscon
+                  - const: simple-mfd
+              - items:
+                  - const: arm,realview-pb1176-syscon
+                  - const: syscon
+                  - const: simple-mfd
+              - items:
+                  - const: arm,realview-pb11mp-syscon
+                  - const: syscon
+                  - const: simple-mfd
+              - items:
+                  - const: arm,realview-pba8-syscon
+                  - const: syscon
+                  - const: simple-mfd
+              - items:
+                  - const: arm,realview-pbx-syscon
+                  - const: syscon
+                  - const: simple-mfd
+
+        required:
+          - compatible
+          - reg
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - soc
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt
deleted file mode 100644
index dc102c4e4a78..000000000000
--- a/Documentation/devicetree/bindings/arm/arm,scmi.txt
+++ /dev/null
@@ -1,196 +0,0 @@
-System Control and Management Interface (SCMI) Message Protocol
-----------------------------------------------------------
-
-The SCMI is intended to allow agents such as OSPM to manage various functions
-that are provided by the hardware platform it is running on, including power
-and performance functions.
-
-This binding is intended to define the interface the firmware implementing
-the SCMI as described in ARM document number ARM DEN 0056A ("ARM System Control
-and Management Interface Platform Design Document")[0] provide for OSPM in
-the device tree.
-
-Required properties:
-
-The scmi node with the following properties shall be under the /firmware/ node.
-
-- compatible : shall be "arm,scmi"
-- mboxes: List of phandle and mailbox channel specifiers. It should contain
-	  exactly one or two mailboxes, one for transmitting messages("tx")
-	  and another optional for receiving the notifications("rx") if
-	  supported.
-- shmem : List of phandle pointing to the shared memory(SHM) area as per
-	  generic mailbox client binding.
-- #address-cells : should be '1' if the device has sub-nodes, maps to
-	  protocol identifier for a given sub-node.
-- #size-cells : should be '0' as 'reg' property doesn't have any size
-	  associated with it.
-
-Optional properties:
-
-- mbox-names: shall be "tx" or "rx" depending on mboxes entries.
-
-See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details
-about the generic mailbox controller and client driver bindings.
-
-The mailbox is the only permitted method of calling the SCMI firmware.
-Mailbox doorbell is used as a mechanism to alert the presence of a
-messages and/or notification.
-
-Each protocol supported shall have a sub-node with corresponding compatible
-as described in the following sections. If the platform supports dedicated
-communication channel for a particular protocol, the 3 properties namely:
-mboxes, mbox-names and shmem shall be present in the sub-node corresponding
-to that protocol.
-
-Clock/Performance bindings for the clocks/OPPs based on SCMI Message Protocol
-------------------------------------------------------------
-
-This binding uses the common clock binding[1].
-
-Required properties:
-- #clock-cells : Should be 1. Contains the Clock ID value used by SCMI commands.
-
-Power domain bindings for the power domains based on SCMI Message Protocol
-------------------------------------------------------------
-
-This binding for the SCMI power domain providers uses the generic power
-domain binding[2].
-
-Required properties:
- - #power-domain-cells : Should be 1. Contains the device or the power
-			 domain ID value used by SCMI commands.
-
-Sensor bindings for the sensors based on SCMI Message Protocol
---------------------------------------------------------------
-SCMI provides an API to access the various sensors on the SoC.
-
-Required properties:
-- #thermal-sensor-cells: should be set to 1. This property follows the
-			 thermal device tree bindings[3].
-
-			 Valid cell values are raw identifiers (Sensor ID)
-			 as used by the firmware. Refer to  platform details
-			 for your implementation for the IDs to use.
-
-Reset signal bindings for the reset domains based on SCMI Message Protocol
-------------------------------------------------------------
-
-This binding for the SCMI reset domain providers uses the generic reset
-signal binding[5].
-
-Required properties:
- - #reset-cells : Should be 1. Contains the reset domain ID value used
-		  by SCMI commands.
-
-SRAM and Shared Memory for SCMI
--------------------------------
-
-A small area of SRAM is reserved for SCMI communication between application
-processors and SCP.
-
-The properties should follow the generic mmio-sram description found in [4]
-
-Each sub-node represents the reserved area for SCMI.
-
-Required sub-node properties:
-- reg : The base offset and size of the reserved area with the SRAM
-- compatible : should be "arm,scmi-shmem" for Non-secure SRAM based
-	       shared memory
-
-[0] http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/index.html
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/power/power-domain.yaml
-[3] Documentation/devicetree/bindings/thermal/thermal.txt
-[4] Documentation/devicetree/bindings/sram/sram.yaml
-[5] Documentation/devicetree/bindings/reset/reset.txt
-
-Example:
-
-sram@50000000 {
-	compatible = "mmio-sram";
-	reg = <0x0 0x50000000 0x0 0x10000>;
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 0x0 0x50000000 0x10000>;
-
-	cpu_scp_lpri: scp-shmem@0 {
-		compatible = "arm,scmi-shmem";
-		reg = <0x0 0x200>;
-	};
-
-	cpu_scp_hpri: scp-shmem@200 {
-		compatible = "arm,scmi-shmem";
-		reg = <0x200 0x200>;
-	};
-};
-
-mailbox@40000000 {
-	....
-	#mbox-cells = <1>;
-	reg = <0x0 0x40000000 0x0 0x10000>;
-};
-
-firmware {
-
-	...
-
-	scmi {
-		compatible = "arm,scmi";
-		mboxes = <&mailbox 0 &mailbox 1>;
-		mbox-names = "tx", "rx";
-		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		scmi_devpd: protocol@11 {
-			reg = <0x11>;
-			#power-domain-cells = <1>;
-		};
-
-		scmi_dvfs: protocol@13 {
-			reg = <0x13>;
-			#clock-cells = <1>;
-		};
-
-		scmi_clk: protocol@14 {
-			reg = <0x14>;
-			#clock-cells = <1>;
-		};
-
-		scmi_sensors0: protocol@15 {
-			reg = <0x15>;
-			#thermal-sensor-cells = <1>;
-		};
-
-		scmi_reset: protocol@16 {
-			reg = <0x16>;
-			#reset-cells = <1>;
-		};
-	};
-};
-
-cpu@0 {
-	...
-	reg = <0 0>;
-	clocks = <&scmi_dvfs 0>;
-};
-
-hdlcd@7ff60000 {
-	...
-	reg = <0 0x7ff60000 0 0x1000>;
-	clocks = <&scmi_clk 4>;
-	power-domains = <&scmi_devpd 1>;
-	resets = <&scmi_reset 10>;
-};
-
-thermal-zones {
-	soc_thermal {
-		polling-delay-passive = <100>;
-		polling-delay = <1000>;
-					/* sensor ID */
-		thermal-sensors = <&scmi_sensors0 3>;
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt
deleted file mode 100644
index dd04d9d9a1b8..000000000000
--- a/Documentation/devicetree/bindings/arm/arm,scpi.txt
+++ /dev/null
@@ -1,219 +0,0 @@
-System Control and Power Interface (SCPI) Message Protocol
-----------------------------------------------------------
-
-Firmware implementing the SCPI described in ARM document number ARM DUI 0922B
-("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be used
-by Linux to initiate various system control and power operations.
-
-Required properties:
-
-- compatible : should be
-	* "arm,scpi" : For implementations complying to SCPI v1.0 or above
-	* "arm,scpi-pre-1.0" : For implementations complying to all
-		unversioned releases prior to SCPI v1.0
-- mboxes: List of phandle and mailbox channel specifiers
-	  All the channels reserved by remote SCP firmware for use by
-	  SCPI message protocol should be specified in any order
-- shmem : List of phandle pointing to the shared memory(SHM) area between the
-	  processors using these mailboxes for IPC, one for each mailbox
-	  SHM can be any memory reserved for the purpose of this communication
-	  between the processors.
-
-See Documentation/devicetree/bindings/mailbox/mailbox.txt
-for more details about the generic mailbox controller and
-client driver bindings.
-
-Clock bindings for the clocks based on SCPI Message Protocol
-------------------------------------------------------------
-
-This binding uses the common clock binding[1].
-
-Container Node
-==============
-Required properties:
-- compatible : should be "arm,scpi-clocks"
-	       All the clocks provided by SCP firmware via SCPI message
-	       protocol much be listed as sub-nodes under this node.
-
-Sub-nodes
-=========
-Required properties:
-- compatible : shall include one of the following
-	"arm,scpi-dvfs-clocks" - all the clocks that are variable and index based.
-		These clocks don't provide an entire range of values between the
-		limits but only discrete points within the range. The firmware
-		provides the mapping for each such operating frequency and the
-		index associated with it. The firmware also manages the
-		voltage scaling appropriately with the clock scaling.
-	"arm,scpi-variable-clocks" - all the clocks that are variable and provide full
-		range within the specified range. The firmware provides the
-		range of values within a specified range.
-
-Other required properties for all clocks(all from common clock binding):
-- #clock-cells : Should be 1. Contains the Clock ID value used by SCPI commands.
-- clock-output-names : shall be the corresponding names of the outputs.
-- clock-indices: The identifying number for the clocks(i.e.clock_id) in the
-	node. It can be non linear and hence provide the mapping of identifiers
-	into the clock-output-names array.
-
-SRAM and Shared Memory for SCPI
--------------------------------
-
-A small area of SRAM is reserved for SCPI communication between application
-processors and SCP.
-
-The properties should follow the generic mmio-sram description found in [3]
-
-Each sub-node represents the reserved area for SCPI.
-
-Required sub-node properties:
-- reg : The base offset and size of the reserved area with the SRAM
-- compatible : should be "arm,scp-shmem" for Non-secure SRAM based
-	       shared memory
-
-Sensor bindings for the sensors based on SCPI Message Protocol
---------------------------------------------------------------
-SCPI provides an API to access the various sensors on the SoC.
-
-Required properties:
-- compatible : should be "arm,scpi-sensors".
-- #thermal-sensor-cells: should be set to 1. This property follows the
-			 thermal device tree bindings[2].
-
-			 Valid cell values are raw identifiers (Sensor ID)
-			 as used by the firmware. Refer to  platform details
-			 for your implementation for the IDs to use.
-
-Power domain bindings for the power domains based on SCPI Message Protocol
-------------------------------------------------------------
-
-This binding uses the generic power domain binding[4].
-
-PM domain providers
-===================
-
-Required properties:
- - #power-domain-cells : Should be 1. Contains the device or the power
-			 domain ID value used by SCPI commands.
- - num-domains: Total number of power domains provided by SCPI. This is
-		needed as the SCPI message protocol lacks a mechanism to
-		query this information at runtime.
-
-PM domain consumers
-===================
-
-Required properties:
- - power-domains : A phandle and PM domain specifier as defined by bindings of
-                   the power controller specified by phandle.
-
-[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/thermal/thermal.txt
-[3] Documentation/devicetree/bindings/sram/sram.yaml
-[4] Documentation/devicetree/bindings/power/power-domain.yaml
-
-Example:
-
-sram: sram@50000000 {
-	compatible = "arm,juno-sram-ns", "mmio-sram";
-	reg = <0x0 0x50000000 0x0 0x10000>;
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 0x0 0x50000000 0x10000>;
-
-	cpu_scp_lpri: scp-shmem@0 {
-		compatible = "arm,juno-scp-shmem";
-		reg = <0x0 0x200>;
-	};
-
-	cpu_scp_hpri: scp-shmem@200 {
-		compatible = "arm,juno-scp-shmem";
-		reg = <0x200 0x200>;
-	};
-};
-
-mailbox: mailbox0@40000000 {
-	....
-	#mbox-cells = <1>;
-};
-
-scpi_protocol: scpi@2e000000 {
-	compatible = "arm,scpi";
-	mboxes = <&mailbox 0 &mailbox 1>;
-	shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
-
-	clocks {
-		compatible = "arm,scpi-clocks";
-
-		scpi_dvfs: scpi_clocks@0 {
-			compatible = "arm,scpi-dvfs-clocks";
-			#clock-cells = <1>;
-			clock-indices = <0>, <1>, <2>;
-			clock-output-names = "atlclk", "aplclk","gpuclk";
-		};
-		scpi_clk: scpi_clocks@3 {
-			compatible = "arm,scpi-variable-clocks";
-			#clock-cells = <1>;
-			clock-indices = <3>, <4>;
-			clock-output-names = "pxlclk0", "pxlclk1";
-		};
-	};
-
-	scpi_sensors0: sensors {
-		compatible = "arm,scpi-sensors";
-		#thermal-sensor-cells = <1>;
-	};
-
-	scpi_devpd: scpi-power-domains {
-		compatible = "arm,scpi-power-domains";
-		num-domains = <2>;
-		#power-domain-cells = <1>;
-	};
-};
-
-cpu@0 {
-	...
-	reg = <0 0>;
-	clocks = <&scpi_dvfs 0>;
-};
-
-hdlcd@7ff60000 {
-	...
-	reg = <0 0x7ff60000 0 0x1000>;
-	clocks = <&scpi_clk 4>;
-	power-domains = <&scpi_devpd 1>;
-};
-
-thermal-zones {
-	soc_thermal {
-		polling-delay-passive = <100>;
-		polling-delay = <1000>;
-
-				/* sensor         ID */
-		thermal-sensors = <&scpi_sensors0 3>;
-		...
-	};
-};
-
-In the above example, the #clock-cells is set to 1 as required.
-scpi_dvfs has 3 output clocks namely: atlclk, aplclk, and gpuclk with 0,
-1 and 2 as clock-indices. scpi_clk has 2 output clocks namely: pxlclk0
-and pxlclk1 with 3 and 4 as clock-indices.
-
-The first consumer in the example is cpu@0 and it has '0' as the clock
-specifier which points to the first entry in the output clocks of
-scpi_dvfs i.e. "atlclk".
-
-Similarly the second example is hdlcd@7ff60000 and it has pxlclk1 as input
-clock. '4' in the clock specifier here points to the second entry
-in the output clocks of scpi_clocks  i.e. "pxlclk1"
-
-The thermal-sensors property in the soc_thermal node uses the
-temperature sensor provided by SCP firmware to setup a thermal
-zone. The ID "3" is the sensor identifier for the temperature sensor
-as used by the firmware.
-
-The num-domains property in scpi-power-domains domain specifies that
-SCPI provides 2 power domains. The hdlcd node uses the power domain with
-domain ID 1.
diff --git a/Documentation/devicetree/bindings/arm/arm,scu.yaml b/Documentation/devicetree/bindings/arm/arm,scu.yaml
new file mode 100644
index 000000000000..dae2aa27e641
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,scu.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Snoop Control Unit (SCU)
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  As part of the MPCore complex, Cortex-A5 and Cortex-A9 are provided
+  with a Snoop Control Unit. The register range is usually 256 (0x100)
+  bytes.
+
+  References:
+    - Cortex-A9: see DDI0407E Cortex-A9 MPCore Technical Reference Manual
+      Revision r2p0
+    - Cortex-A5: see DDI0434B Cortex-A5 MPCore Technical Reference Manual
+      Revision r0p1
+    - ARM11 MPCore: see DDI0360F ARM 11 MPCore Processor Technical Reference
+      Manial Revision r2p0
+
+properties:
+  compatible:
+    enum:
+      - arm,cortex-a9-scu
+      - arm,cortex-a5-scu
+      - arm,arm11mp-scu
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    scu@a0410000 {
+            compatible = "arm,cortex-a9-scu";
+            reg = <0xa0410000 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml
new file mode 100644
index 000000000000..b1322658063a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright 2021, Arm Ltd
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/arm,trace-buffer-extension.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ARM Trace Buffer Extensions
+
+maintainers:
+  - Anshuman Khandual <anshuman.khandual@arm.com>
+
+description: |
+  Arm Trace Buffer Extension (TRBE) is a per CPU component
+  for storing trace generated on the CPU to memory. It is
+  accessed via CPU system registers. The software can verify
+  if it is permitted to use the component by checking the
+  TRBIDR register.
+
+properties:
+  $nodename:
+    const: "trbe"
+  compatible:
+    items:
+      - const: arm,trace-buffer-extension
+
+  interrupts:
+    description: |
+       Exactly 1 PPI must be listed. For heterogeneous systems where
+       TRBE is only supported on a subset of the CPUs, please consult
+       the arm,gic-v3 binding for details on describing a PPI partition.
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+
+  - |
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+   trbe {
+     compatible = "arm,trace-buffer-extension";
+     interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+   };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml
new file mode 100644
index 000000000000..491eef1e1b10
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,versatile-sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Versatile system registers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  This is a system control registers block, providing multiple low level
+  platform functions like board detection and identification, software
+  interrupt generation, MMC and NOR Flash control, etc.
+
+properties:
+  compatible:
+    items:
+      - const: arm,versatile-sysreg
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  panel:
+    type: object
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,versatile.yaml b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
new file mode 100644
index 000000000000..13e52ba92060
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Boards
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  The ARM Versatile boards are two variants of ARM926EJ-S evaluation boards
+  with various pluggable interface boards, in essence the Versatile PB version
+  is a superset of the Versatile AB version.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: The ARM Versatile Application Baseboard (HBI-0118) is an
+          evaluation board specifically for the ARM926EJ-S. It can be connected
+          to an IB1 interface board for a touchscreen-type use case or an IB2
+          for a candybar phone-type use case. See ARM DUI 0225D.
+        items:
+          - const: arm,versatile-ab
+      - description: The ARM Versatile Platform Baseboard (HBI-0117) is an
+          extension of the Versatile Application Baseboard that includes a
+          PCI host controller. Like the sibling board, it is done specifically
+          for ARM926EJ-S. See ARM DUI 0224B.
+        items:
+          - const: arm,versatile-pb
+
+  core-module@10000000:
+    type: object
+    description: the root node in the Versatile platforms must contain
+      a core module child node. They are always at physical address
+      0x10000000 in all the Versatile variants.
+    properties:
+      compatible:
+        items:
+          - const: arm,core-module-versatile
+          - const: syscon
+          - const: simple-mfd
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+patternProperties:
+  "^syscon@[0-9a-f]+$":
+    type: object
+    description: When fitted with the IB2 Interface Board, the Versatile
+      AB will present an optional system controller node which controls the
+      extra peripherals on the interface board.
+    properties:
+      compatible:
+        contains:
+          const: arm,versatile-ib2-syscon
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - core-module@10000000
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
new file mode 100644
index 000000000000..eec190a96225
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -0,0 +1,229 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,vexpress-juno.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express and Juno Boards
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  ARM's Versatile Express platform were built as reference designs for exploring
+  multicore Cortex-A class systems. The Versatile Express family contains both
+  32 bit (Aarch32) and 64 bit (Aarch64) systems.
+
+  The board consist of a motherboard and one or more daughterboards (tiles). The
+  motherboard provides a set of peripherals. Processor and RAM "live" on the
+  tiles.
+
+  The motherboard and each core tile should be described by a separate Device
+  Tree source file, with the tile's description including the motherboard file
+  using an include directive. As the motherboard can be initialized in one of
+  two different configurations ("memory maps"), care must be taken to include
+  the correct one.
+
+  When a new generation of boards were introduced under the name "Juno", these
+  shared to many common characteristics with the Versatile Express that the
+  "arm,vexpress" compatible was retained in the root node, and these are
+  included in this binding schema as well.
+
+  The root node indicates the CPU SoC on the core tile, and this
+  is a daughterboard to the main motherboard. The name used in the compatible
+  string shall match the name given in the core tile's technical reference
+  manual, followed by "arm,vexpress" as an additional compatible value. If
+  further subvariants are released of the core tile, even more fine-granular
+  compatible strings with up to three compatible strings are used.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: CoreTile Express A9x4 (V2P-CA9) has 4 Cortex A9 CPU cores
+          in MPCore configuration in a test chip on the core tile. See ARM
+          DUI 0448I. This was the first Versatile Express platform.
+        items:
+          - const: arm,vexpress,v2p-ca9
+          - const: arm,vexpress
+      - description: CoreTile Express A5x2 (V2P-CA5s) has 2 Cortex A5 CPU cores
+          in a test chip on the core tile. It is intended to evaluate NEON, FPU
+          and Jazelle support in the Cortex A5 family. See ARM DUI 0541C.
+        items:
+          - const: arm,vexpress,v2p-ca5s
+          - const: arm,vexpress
+      - description: Coretile Express A15x2 (V2P-CA15) has 2 Cortex A15 CPU
+          cores in a MPCore configuration in a test chip on the core tile. See
+          ARM DUI 0604F.
+        items:
+          - const: arm,vexpress,v2p-ca15
+          - const: arm,vexpress
+      - description: CoreTile Express A15x4 (V2P-CA15, HBI-0237A) has 4 Cortex
+          A15 CPU cores in a test chip on the core tile. This is the first test
+          chip called "TC1".
+        items:
+          - const: arm,vexpress,v2p-ca15,tc1
+          - const: arm,vexpress,v2p-ca15
+          - const: arm,vexpress
+      - description: Coretile Express A15x2 A7x3 (V2P-CA15_A7) has 2 Cortex A15
+          CPU cores and 3 Cortex A7 cores in a big.LITTLE MPCore configuration
+          in a test chip on the core tile. See ARM DDI 0503I.
+        items:
+          - const: arm,vexpress,v2p-ca15_a7
+          - const: arm,vexpress
+      - description: LogicTile Express 20MG (V2F-1XV7) has 2 Cortex A53 CPU
+          cores in a test chip on the core tile. See ARM DDI 0498D.
+        items:
+          - const: arm,vexpress,v2f-1xv7,ca53x2
+          - const: arm,vexpress,v2f-1xv7
+          - const: arm,vexpress
+      - description: Arm Versatile Express Juno "r0" (the first Juno board,
+          V2M-Juno) was introduced as a vehicle for evaluating big.LITTLE on
+          AArch64 CPU cores. It has 2 Cortex A57 CPU cores and 4 Cortex A53
+          cores in a big.LITTLE configuration. It also features the MALI T624
+          GPU. See ARM document 100113_0000_07_en.
+        items:
+          - const: arm,juno
+          - const: arm,vexpress
+      - description: Arm Versatile Express Juno r1 Development Platform
+          (V2M-Juno r1) was introduced mainly aimed at development of PCIe
+          based systems. Juno r1 also has support for AXI masters placed on
+          the TLX connectors to join the coherency domain. Otherwise it is the
+          same configuration as Juno r0. See ARM document 100122_0100_06_en.
+        items:
+          - const: arm,juno-r1
+          - const: arm,juno
+          - const: arm,vexpress
+      - description: Arm Versatile Express Juno r2 Development Platform
+          (V2M-Juno r2). It has the same feature set as Juno r0 and r1. See
+          ARM document 100114_0200_04_en.
+        items:
+          - const: arm,juno-r2
+          - const: arm,juno
+          - const: arm,vexpress
+      - description: Arm AEMv8a Versatile Express Real-Time System Model
+          (VE RTSM) is a programmers view of the Versatile Express with Arm
+          v8A hardware. See ARM DUI 0575D.
+        items:
+          - const: arm,rtsm_ve,aemv8a
+          - const: arm,vexpress
+      - description: Arm FVP (Fixed Virtual Platform) base model revision C
+          See ARM Document 100964_1190_00_en.
+        items:
+          - const: arm,fvp-base-revc
+          - const: arm,vexpress
+      - description: Arm Foundation model for Aarch64
+        items:
+          - const: arm,foundation-aarch64
+          - const: arm,vexpress
+
+  arm,vexpress,position:
+    description: When daughterboards are stacked on one site, their position
+      in the stack be be described this attribute.
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    minimum: 0
+    maximum: 3
+
+  arm,vexpress,dcc:
+    description: When describing tiles consisting of more than one DCC, its
+      number can be specified with this attribute.
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    minimum: 0
+    maximum: 3
+
+patternProperties:
+  "^bus@[0-9a-f]+$":
+    description: Static Memory Bus (SMB) node, if this exists it describes
+      the connection between the motherboard and any tiles. Sometimes the
+      compatible is placed directly under this node, sometimes it is placed
+      in a subnode named "motherboard-bus". Sometimes the compatible includes
+      "arm,vexpress,v2?-p1" sometimes (on software models) is is just
+      "simple-bus". If the compatible is placed in the "motherboard-bus" node,
+      it is stricter and always has two compatibles.
+    type: object
+    $ref: '/schemas/simple-bus.yaml'
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - enum:
+                  - arm,vexpress,v2m-p1
+                  - arm,vexpress,v2p-p1
+              - const: simple-bus
+          - const: simple-bus
+
+    patternProperties:
+      '^motherboard-bus@':
+        type: object
+        description: The motherboard description provides a single "motherboard"
+          node using 2 address cells corresponding to the Static Memory Bus
+          used between the motherboard and the tile. The first cell defines the
+          Chip Select (CS) line number, the second cell address offset within
+          the CS. All interrupt lines between the motherboard and the tile
+          are active high and are described using single cell.
+        properties:
+          "#address-cells":
+            const: 2
+          "#size-cells":
+            const: 1
+          ranges: true
+
+          compatible:
+            items:
+              - enum:
+                  - arm,vexpress,v2m-p1
+                  - arm,vexpress,v2p-p1
+              - const: simple-bus
+          arm,v2m-memory-map:
+            description: This describes the memory map type.
+            $ref: '/schemas/types.yaml#/definitions/string'
+            enum:
+              - rs1
+              - rs2
+
+          arm,hbi:
+            $ref: '/schemas/types.yaml#/definitions/uint32'
+            description: This indicates the ARM HBI (Hardware Board ID), this is
+              ARM's unique board model ID, visible on the PCB's silkscreen.
+
+          arm,vexpress,site:
+            description: As Versatile Express can be configured in number of physically
+              different setups, the device tree should describe platform topology.
+              For this reason the root node and main motherboard node must define this
+              property, describing the physical location of the children nodes.
+              0 means motherboard site, while 1 and 2 are daughterboard sites, and
+              0xf means "sisterboard" which is the site containing the main CPU tile.
+            $ref: '/schemas/types.yaml#/definitions/uint32'
+            minimum: 0
+            maximum: 15
+
+        required:
+          - compatible
+
+        additionalProperties:
+          type: object
+
+    required:
+      - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - arm,vexpress,v2p-ca9
+              - arm,vexpress,v2p-ca5s
+              - arm,vexpress,v2p-ca15
+              - arm,vexpress,v2p-ca15_a7
+              - arm,vexpress,v2f-1xv7,ca53x2
+    then:
+      required:
+        - arm,hbi
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
deleted file mode 100644
index 96b1dad58253..000000000000
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ /dev/null
@@ -1,237 +0,0 @@
-ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform)
------------------------------------------------------------------------------
-ARM's oldest Linux-supported platform with connectors for different core
-tiles of ARMv4, ARMv5 and ARMv6 type.
-
-Required properties (in root node):
-	compatible = "arm,integrator-ap";  /* Application Platform */
-	compatible = "arm,integrator-cp";  /* Compact Platform */
-
-FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
-
-Required nodes:
-
-- core-module: the root node to the Integrator platforms must have
-  a core-module with regs and the compatible string
-  "arm,core-module-integrator"
-- external-bus-interface: the root node to the Integrator platforms
-  must have an external bus interface with regs and the
-  compatible-string "arm,external-bus-interface"
-
-  Required properties for the core module:
-  - regs: the location and size of the core module registers, one
-    range of 0x200 bytes.
-
-- syscon: the root node of the Integrator platforms must have a
-  system controller node pointing to the control registers,
-  with the compatible string
-  "arm,integrator-ap-syscon"
-  "arm,integrator-cp-syscon"
-  respectively.
-
-  Required properties for the system controller:
-  - regs: the location and size of the system controller registers,
-    one range of 0x100 bytes.
-
-  Required properties for the AP system controller:
-  - interrupts: the AP syscon node must include the logical module
-    interrupts, stated in order of module instance <module 0>,
-    <module 1>, <module 2> ... for the CP system controller this
-    is not required not of any use.
-
-/dts-v1/;
-/include/ "integrator.dtsi"
-
-/ {
-	model = "ARM Integrator/AP";
-	compatible = "arm,integrator-ap";
-
-	core-module@10000000 {
-		compatible = "arm,core-module-integrator";
-		reg = <0x10000000 0x200>;
-	};
-
-	ebi@12000000 {
-		compatible = "arm,external-bus-interface";
-		reg = <0x12000000 0x100>;
-	};
-
-	syscon {
-		compatible = "arm,integrator-ap-syscon";
-		reg = <0x11000000 0x100>;
-		interrupt-parent = <&pic>;
-		/* These are the logic module IRQs */
-		interrupts = <9>, <10>, <11>, <12>;
-	};
-};
-
-
-ARM Versatile Application and Platform Baseboards
--------------------------------------------------
-ARM's development hardware platform with connectors for customizable
-core tiles.  The hardware configuration of the Versatile boards is
-highly customizable.
-
-Required properties (in root node):
-	compatible = "arm,versatile-ab";  /* Application baseboard */
-	compatible = "arm,versatile-pb";  /* Platform baseboard */
-
-Interrupt controllers:
-- VIC required properties:
-	compatible = "arm,versatile-vic";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-- SIC required properties:
-	compatible = "arm,versatile-sic";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-Required nodes:
-
-- core-module: the root node to the Versatile platforms must have
-  a core-module with regs and the compatible strings
-  "arm,core-module-versatile", "syscon"
-
-Optional nodes:
-
-- arm,versatile-ib2-syscon : if the Versatile has an IB2 interface
-  board mounted, this has a separate system controller that is
-  defined in this node.
-  Required properties:
-  compatible = "arm,versatile-ib2-syscon", "syscon"
-
-ARM RealView Boards
--------------------
-The RealView boards cover tailored evaluation boards that are used to explore
-the ARM11 and Cortex A-8 and Cortex A-9 processors.
-
-Required properties (in root node):
-	/* RealView Emulation Baseboard */
-	compatible = "arm,realview-eb";
-	 /* RealView Platform Baseboard for ARM1176JZF-S */
-	compatible = "arm,realview-pb1176";
-	/* RealView Platform Baseboard for ARM11 MPCore */
-	compatible = "arm,realview-pb11mp";
-	/* RealView Platform Baseboard for Cortex A-8 */
-	compatible = "arm,realview-pba8";
-	/* RealView Platform Baseboard Explore for Cortex A-9 */
-	compatible = "arm,realview-pbx";
-
-Required nodes:
-
-- soc: some node of the RealView platforms must be the SoC
-  node that contain the SoC-specific devices, with the compatible
-  string set to one of these tuples:
-   "arm,realview-eb-soc", "simple-bus"
-   "arm,realview-pb1176-soc", "simple-bus"
-   "arm,realview-pb11mp-soc", "simple-bus"
-   "arm,realview-pba8-soc", "simple-bus"
-   "arm,realview-pbx-soc", "simple-bus"
-
-- syscon: some subnode of the RealView SoC node must be a
-  system controller node pointing to the control registers,
-  with the compatible string set to one of these:
-   "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon"
-   "arm,realview-eb11mp-revc-syscon", "arm,realview-eb-syscon", "syscon"
-   "arm,realview-eb-syscon", "syscon"
-   "arm,realview-pb1176-syscon", "syscon"
-   "arm,realview-pb11mp-syscon", "syscon"
-   "arm,realview-pba8-syscon", "syscon"
-   "arm,realview-pbx-syscon", "syscon"
-
-  Required properties for the system controller:
-  - regs: the location and size of the system controller registers,
-    one range of 0x1000 bytes.
-
-Example:
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "ARM RealView PB1176 with device tree";
-	compatible = "arm,realview-pb1176";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,realview-pb1176-soc", "simple-bus";
-		ranges;
-
-		syscon: syscon@10000000 {
-			compatible = "arm,realview-syscon", "syscon";
-			reg = <0x10000000 0x1000>;
-		};
-
-	};
-};
-
-ARM Versatile Express Boards
------------------------------
-For details on the device tree bindings for ARM Versatile Express boards
-please consult the vexpress.txt file in the same directory as this file.
-
-ARM Juno Boards
-----------------
-The Juno boards are targeting development for AArch64 systems. The first
-iteration, Juno r0, is a vehicle for evaluating big.LITTLE on AArch64,
-with the second iteration, Juno r1, mainly aimed at development of PCIe
-based systems. Juno r1 also has support for AXI masters placed on the TLX
-connectors to join the coherency domain.
-
-Juno boards are described in a similar way to ARM Versatile Express boards,
-with the motherboard part of the hardware being described in a separate file
-to highlight the fact that is part of the support infrastructure for the SoC.
-Juno device tree bindings also share the Versatile Express bindings as
-described under the RS1 memory mapping.
-
-Required properties (in root node):
-	compatible = "arm,juno";	/* For Juno r0 board */
-	compatible = "arm,juno-r1";	/* For Juno r1 board */
-	compatible = "arm,juno-r2";	/* For Juno r2 board */
-
-Required nodes:
-The description for the board must include:
-   - a "psci" node describing the boot method used for the secondary CPUs.
-     A detailed description of the bindings used for "psci" nodes is present
-     in the psci.yaml file.
-   - a "cpus" node describing the available cores and their associated
-     "enable-method"s. For more details see cpus.yaml file.
-
-Example:
-
-/dts-v1/;
-/ {
-	model = "ARM Juno development board (r0)";
-	compatible = "arm,juno", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		A57_0: cpu@0 {
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x0>;
-			device_type = "cpu";
-			enable-method = "psci";
-		};
-
-		.....
-
-		A53_0: cpu@100 {
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x100>;
-			device_type = "cpu";
-			enable-method = "psci";
-		};
-
-		.....
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt b/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt
deleted file mode 100644
index 6efabba530f1..000000000000
--- a/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU)
-
-ARM DyanmIQ Shared Unit (DSU) integrates one or more CPU cores
-with a shared L3 memory system, control logic and external interfaces to
-form a multicore cluster. The PMU enables to gather various statistics on
-the operations of the DSU. The PMU provides independent 32bit counters that
-can count any of the supported events, along with a 64bit cycle counter.
-The PMU is accessed via CPU system registers and has no MMIO component.
-
-** DSU PMU required properties:
-
-- compatible	: should be one of :
-
-		"arm,dsu-pmu"
-
-- interrupts	: Exactly 1 SPI must be listed.
-
-- cpus		: List of phandles for the CPUs connected to this DSU instance.
-
-
-** Example:
-
-dsu-pmu-0 {
-	compatible = "arm,dsu-pmu";
-	interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>;
-	cpus = <&cpu_0>, <&cpu_1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml
new file mode 100644
index 000000000000..c72aab706484
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+# Copyright 2021 Joel Stanley, IBM Corp.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/aspeed/aspeed,sbc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ASPEED Secure Boot Controller
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |
+  The ASPEED SoCs have a register bank for interacting with the secure boot
+  controller.
+
+properties:
+  compatible:
+    items:
+      - const: aspeed,ast2600-sbc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sbc: secure-boot-controller@1e6f2000 {
+            compatible = "aspeed,ast2600-sbc";
+            reg = <0x1e6f2000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
new file mode 100644
index 000000000000..217a1d674863
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SoC based boards
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: AST2400 based boards
+        items:
+          - enum:
+              - facebook,galaxy100-bmc
+              - facebook,wedge100-bmc
+              - facebook,wedge40-bmc
+              - microsoft,olympus-bmc
+              - quanta,q71l-bmc
+              - tyan,palmetto-bmc
+              - yadro,vesnin-bmc
+          - const: aspeed,ast2400
+
+      - description: AST2500 based boards
+        items:
+          - enum:
+              - amd,daytonax-bmc
+              - amd,ethanolx-bmc
+              - ampere,mtjade-bmc
+              - aspeed,ast2500-evb
+              - asrock,e3c246d4i-bmc
+              - asrock,romed8hm3-bmc
+              - bytedance,g220a-bmc
+              - facebook,cmm-bmc
+              - facebook,minipack-bmc
+              - facebook,tiogapass-bmc
+              - facebook,yamp-bmc
+              - facebook,yosemitev2-bmc
+              - facebook,wedge400-bmc
+              - hxt,stardragon4800-rep2-bmc
+              - ibm,mihawk-bmc
+              - ibm,mowgli-bmc
+              - ibm,romulus-bmc
+              - ibm,swift-bmc
+              - ibm,witherspoon-bmc
+              - ingrasys,zaius-bmc
+              - inspur,fp5280g2-bmc
+              - inspur,nf5280m6-bmc
+              - inspur,on5263m5-bmc
+              - intel,s2600wf-bmc
+              - inventec,lanyang-bmc
+              - lenovo,hr630-bmc
+              - lenovo,hr855xg2-bmc
+              - portwell,neptune-bmc
+              - qcom,centriq2400-rep-bmc
+              - supermicro,x11spi-bmc
+              - tyan,s7106-bmc
+              - tyan,s8036-bmc
+              - yadro,nicole-bmc
+              - yadro,vegman-n110-bmc
+              - yadro,vegman-rx20-bmc
+              - yadro,vegman-sx20-bmc
+          - const: aspeed,ast2500
+
+      - description: AST2600 based boards
+        items:
+          - enum:
+              - ampere,mtmitchell-bmc
+              - aspeed,ast2600-evb
+              - aspeed,ast2600-evb-a1
+              - facebook,bletchley-bmc
+              - facebook,cloudripper-bmc
+              - facebook,elbert-bmc
+              - facebook,fuji-bmc
+              - ibm,everest-bmc
+              - ibm,rainier-bmc
+              - ibm,tacoma-bmc
+              - inventec,transformer-bmc
+              - jabil,rbp-bmc
+              - nuvia,dc-scm-bmc
+              - quanta,s6q-bmc
+          - const: aspeed,ast2600
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
index 0357314076bc..2224b18801a1 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
@@ -4,11 +4,12 @@
 $id: http://devicetree.org/schemas/arm/atmel-at91.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Atmel AT91 device tree bindings.
+title: Atmel AT91.
 
 maintainers:
   - Alexandre Belloni <alexandre.belloni@bootlin.com>
-  - Ludovic Desroches <ludovic.desroches@microchip.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
 
 description: |
   Boards with a SoC of the Atmel AT91 or SMART family shall have the following
@@ -41,6 +42,7 @@ properties:
               - overkiz,kizboxmini-mb   # Overkiz kizbox Mini Mother Board
               - overkiz,kizboxmini-rd   # Overkiz kizbox Mini RailDIN
               - overkiz,smartkiz        # Overkiz SmartKiz Board
+              - gardena,smart-gateway-at91sam # GARDENA smart Gateway (Article No. 19000)
           - const: atmel,at91sam9g25
           - const: atmel,at91sam9x5
           - const: atmel,at91sam9
@@ -82,6 +84,13 @@ properties:
           - const: atmel,sama5d2
           - const: atmel,sama5
 
+      - description: Microchip SAMA5D2 Industrial Connectivity Platform
+        items:
+          - const: microchip,sama5d2-icp
+          - const: atmel,sama5d27
+          - const: atmel,sama5d2
+          - const: atmel,sama5
+
       - description: SAM9X60-EK board
         items:
           - const: microchip,sam9x60ek
@@ -118,6 +127,25 @@ properties:
           - const: atmel,sama5d3
           - const: atmel,sama5
 
+      - description: Microchip SAMA5D3 Ethernet Development System Board
+        items:
+          - const: microchip,sama5d3-eds
+          - const: atmel,sama5d36
+          - const: atmel,sama5d3
+          - const: atmel,sama5
+
+      - description: CalAmp LMU5000 board
+        items:
+          - const: calamp,lmu5000
+          - const: atmel,at91sam9g20
+          - const: atmel,at91sam9
+
+      - description: Exegin Q5xR5 board
+        items:
+          - const: exegin,q5xr5
+          - const: atmel,at91sam9g20
+          - const: atmel,at91sam9
+
       - items:
           - enum:
               - atmel,sama5d31
@@ -138,6 +166,34 @@ properties:
           - const: atmel,sama5
 
       - items:
+          - const: microchip,sama7g5ek # SAMA7G5 Evaluation Kit
+          - const: microchip,sama7g5
+          - const: microchip,sama7
+
+      - description: Microchip LAN9662 Evaluation Boards.
+        items:
+          - enum:
+              - microchip,lan9662-pcb8291
+              - microchip,lan9662-pcb8309
+          - const: microchip,lan9662
+          - const: microchip,lan966
+
+      - description: Microchip LAN9668 PCB8290 Evaluation Board.
+        items:
+          - const: microchip,lan9668-pcb8290
+          - const: microchip,lan9668
+          - const: microchip,lan966
+
+      - description: Kontron KSwitch D10 MMT series
+        items:
+          - enum:
+              - kontron,kswitch-d10-mmt-8g
+              - kontron,kswitch-d10-mmt-6g-2gs
+          - const: kontron,s1921
+          - const: microchip,lan9668
+          - const: microchip,lan966
+
+      - items:
           - enum:
               - atmel,sams70j19
               - atmel,sams70j20
@@ -176,4 +232,6 @@ properties:
           - const: atmel,samv71
           - const: atmel,samv7
 
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 62cd4e89817c..ab1b352344ae 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -1,7 +1,7 @@
 Atmel system registers
 
 Chipid required properties:
-- compatible: Should be "atmel,sama5d2-chipid"
+- compatible: Should be "atmel,sama5d2-chipid" or "microchip,sama7g5-chipid"
 - reg : Should contain registers location and length
 
 PIT Timer required properties:
@@ -25,27 +25,13 @@ System Timer (ST) required properties:
 Its subnodes can be:
 - watchdog: compatible should be "atmel,at91rm9200-wdt"
 
-RSTC Reset Controller required properties:
-- compatible: Should be "atmel,<chip>-rstc".
-  <chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7"
-  it also can be "microchip,sam9x60-rstc"
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-Example:
-
-	rstc@fffffd00 {
-		compatible = "atmel,at91sam9260-rstc";
-		reg = <0xfffffd00 0x10>;
-		clocks = <&clk32k>;
-	};
-
 RAMC SDRAM/DDR Controller required properties:
 - compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
 			"atmel,at91sam9260-sdramc",
 			"atmel,at91sam9g45-ddramc",
 			"atmel,sama5d3-ddramc",
-			"microchip,sam9x60-ddramc"
+			"microchip,sam9x60-ddramc",
+			"microchip,sama7g5-uddrc"
 - reg: Should contain registers location and length
 
 Examples:
@@ -55,6 +41,17 @@ Examples:
 		reg = <0xffffe800 0x200>;
 	};
 
+RAMC PHY Controller required properties:
+- compatible: Should be "microchip,sama7g5-ddr3phy", "syscon"
+- reg: Should contain registers location and length
+
+Example:
+
+	ddr3phy: ddr3phy@e3804000 {
+		compatible = "microchip,sama7g5-ddr3phy", "syscon";
+		reg = <0xe3804000 0x1000>;
+};
+
 SHDWC Shutdown Controller
 
 required properties:
@@ -91,7 +88,8 @@ SHDWC SAMA5D2-Compatible Shutdown Controller
 1) shdwc node
 
 required properties:
-- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
+- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
+  "microchip,sama7g5-shdwc"
 - reg: should contain registers location and length
 - clocks: phandle to input clock.
 - #address-cells: should be one. The cell is the wake-up input index.
@@ -103,7 +101,7 @@ optional properties:
   microseconds. It's usually a board-related property.
 - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
 
-optional microchip,sam9x60-shdwc properties:
+optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
 - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
 
 The node contains child nodes for each wake-up input that the platform uses.
diff --git a/Documentation/devicetree/bindings/arm/axxia.yaml b/Documentation/devicetree/bindings/arm/axxia.yaml
index 98780a569f22..d60907e43efc 100644
--- a/Documentation/devicetree/bindings/arm/axxia.yaml
+++ b/Documentation/devicetree/bindings/arm/axxia.yaml
@@ -4,16 +4,20 @@
 $id: http://devicetree.org/schemas/arm/axxia.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Axxia AXM55xx device tree bindings
+title: Axxia AXM55xx
 
 maintainers:
   - Anders Berg <anders.berg@lsi.com>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     description: LSI AXM5516 Validation board (Amarillo)
     items:
       - const: lsi,axm5516-amarillo
       - const: lsi,axm5516
 
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
index dd52e29b0642..8051a75c2c79 100644
--- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
@@ -18,6 +18,8 @@ properties:
       - description: BCM2711 based Boards
         items:
           - enum:
+              - raspberrypi,400
+              - raspberrypi,4-compute-module
               - raspberrypi,4-model-b
           - const: brcm,bcm2711
 
@@ -49,6 +51,9 @@ properties:
               - raspberrypi,3-model-b-plus
               - raspberrypi,3-compute-module
               - raspberrypi,3-compute-module-lite
+              - raspberrypi,model-zero-2-w
           - const: brcm,bcm2837
 
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
deleted file mode 100644
index e3f996920403..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Broadcom Kona Family CPU Enable Method
---------------------------------------
-This binding defines the enable method used for starting secondary
-CPUs in the following Broadcom SoCs:
-  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
-
-The enable method is specified by defining the following required
-properties in the "cpu" device tree node:
-  - enable-method = "brcm,bcm11351-cpu-method";
-  - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register used to request the ROM holding pen
-code release a secondary CPU.  The value written to the register is
-formed by encoding the target CPU id into the low bits of the
-physical start address it should jump to.
-
-Example:
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			enable-method = "brcm,bcm11351-cpu-method";
-			secondary-boot-reg = <0x3500417c>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt
deleted file mode 100644
index 0ff6560e6094..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Broadcom BCM11351 device tree bindings
--------------------------------------------
-
-Boards with the bcm281xx SoC family (which includes bcm11130, bcm11140,
-bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties:
-
-Required root node property:
-
-compatible = "brcm,bcm11351";
-DEPRECATED: compatible = "bcm,bcm11351";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
new file mode 100644
index 000000000000..c60324357435
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm11351.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM11351 device tree bindings
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm28155-ap
+      - const: brcm,bcm11351
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt
deleted file mode 100644
index e0774255e1a6..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom BCM21664 device tree bindings
---------------------------------------
-
-This document describes the device tree bindings for boards with the BCM21664
-SoC.
-
-Required root node property:
-  - compatible: brcm,bcm21664
-
-Example:
-	/ {
-		model = "BCM21664 SoC";
-		compatible = "brcm,bcm21664";
-		[...]
-	}
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
new file mode 100644
index 000000000000..b3020757380f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm21664.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM21664 device tree bindings
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm21664-garnet
+      - const: brcm,bcm21664
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
deleted file mode 100644
index a3af54c0e404..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Broadcom Kona Family CPU Enable Method
---------------------------------------
-This binding defines the enable method used for starting secondary
-CPUs in the following Broadcom SoCs:
-  BCM23550
-
-The enable method is specified by defining the following required
-properties in the "cpu" device tree node:
-  - enable-method = "brcm,bcm23550";
-  - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register used to request the ROM holding pen
-code release a secondary CPU.  The value written to the register is
-formed by encoding the target CPU id into the low bits of the
-physical start address it should jump to.
-
-Example:
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x3500417c>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt
deleted file mode 100644
index 080baad923d6..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom BCM23550 device tree bindings
---------------------------------------
-
-This document describes the device tree bindings for boards with the BCM23550
-SoC.
-
-Required root node property:
-  - compatible: brcm,bcm23550
-
-Example:
-	/ {
-		model = "BCM23550 SoC";
-		compatible = "brcm,bcm23550";
-		[...]
-	}
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
new file mode 100644
index 000000000000..37f3a6fcde76
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm23550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM23550 device tree bindings
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm23550-sparrow
+      - const: brcm,bcm23550
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
deleted file mode 100644
index 8608a776caa7..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom BCM4708 device tree bindings
--------------------------------------------
-
-Boards with the BCM4708 SoC shall have the following properties:
-
-Required root node property:
-
-bcm4708
-compatible = "brcm,bcm4708";
-
-bcm4709
-compatible = "brcm,bcm4709";
-
-bcm53012
-compatible = "brcm,bcm53012";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
new file mode 100644
index 000000000000..958df32b4899
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4708.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4708 device tree bindings
+
+description:
+  Broadcom BCM4708/47081/4709/47094/53012 Wi-Fi/network SoCs based
+  on the iProc architecture (Northstar).
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Hauke Mehrtens <hauke@hauke-m.de>
+  - Rafal Milecki <zajec5@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM4708 based boards
+        items:
+          - enum:
+              - asus,rt-ac56u
+              - asus,rt-ac68u
+              - buffalo,wzr-1750dhp
+              - linksys,ea6300-v1
+              - linksys,ea6500-v2
+              - luxul,xap-1510v1
+              - luxul,xwc-1000
+              - netgear,r6250v1
+              - netgear,r6300v2
+              - smartrg,sr400ac
+              - brcm,bcm94708
+          - const: brcm,bcm4708
+
+      - description: BCM47081 based boards
+        items:
+          - enum:
+              - asus,rt-n18u
+              - buffalo,wzr-600dhp2
+              - buffalo,wzr-900dhp
+              - luxul,xap-1410v1
+              - luxul,xwr-1200v1
+              - tplink,archer-c5-v2
+          - const: brcm,bcm47081
+          - const: brcm,bcm4708
+
+      - description: BCM4709 based boards
+        items:
+          - enum:
+              - asus,rt-ac87u
+              - buffalo,wxr-1900dhp
+              - linksys,ea9200
+              - netgear,r7000
+              - netgear,r8000
+              - tplink,archer-c9-v1
+              - brcm,bcm94709
+          - const: brcm,bcm4709
+          - const: brcm,bcm4708
+
+      - description: BCM47094 based boards
+        items:
+          - enum:
+              - asus,rt-ac88u
+              - dlink,dir-885l
+              - linksys,panamera
+              - luxul,abr-4500-v1
+              - luxul,xap-1610-v1
+              - luxul,xbr-4500-v1
+              - luxul,xwc-2000-v1
+              - luxul,xwr-3100v1
+              - luxul,xwr-3150-v1
+              - netgear,r8500
+              - phicomm,k3
+          - const: brcm,bcm47094
+          - const: brcm,bcm4708
+
+      - description: BCM53012 based boards
+        items:
+          - enum:
+              - brcm,bcm953012er
+              - brcm,bcm953012hr
+              - brcm,bcm953012k
+          - const: brcm,bcm53012
+          - const: brcm,bcm4708
+
+      - description: BCM53015 based boards
+        items:
+          - enum:
+              - meraki,mr26
+          - const: brcm,bcm53015
+          - const: brcm,bcm4708
+
+      - description: BCM53016 based boards
+        items:
+          - enum:
+              - meraki,mr32
+          - const: brcm,bcm53016
+          - const: brcm,bcm4708
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
index 8c7a4908a849..a8866c6e9d46 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
@@ -30,7 +30,7 @@ Example:
 
 	cpus {
 		cpu@0 {
-			compatible = "arm,cotex-a9";
+			compatible = "arm,cortex-a9";
 			reg = <0>;
 			...
 			enable-method = "brcm,bcm63138";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
new file mode 100644
index 000000000000..84866e29cab0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcmbca.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Broadband SoC device tree bindings
+
+description:
+  Broadcom Broadband SoCs include family of high performance DSL/PON/Wireless
+  chips that can be used as home gateway, router and WLAN AP for residential,
+  enterprise and carrier applications.
+
+maintainers:
+  - William Zhang <william.zhang@broadcom.com>
+  - Anand Gore <anand.gore@broadcom.com>
+  - Kursad Oney <kursad.oney@broadcom.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM47622 based boards
+        items:
+          - enum:
+              - brcm,bcm947622
+          - const: brcm,bcm47622
+          - const: brcm,bcmbca
+
+      - description: BCM4906 based boards
+        items:
+          - enum:
+              - netgear,r8000p
+              - tplink,archer-c2300-v1
+          - const: brcm,bcm4906
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM4908 based boards
+        items:
+          - enum:
+              - asus,gt-ac5300
+              - brcm,bcm94908
+              - netgear,raxe500
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM49408 based boards
+        items:
+          - const: brcm,bcm49408
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM4912 based boards
+        items:
+          - enum:
+              - asus,gt-ax6000
+              - brcm,bcm94912
+          - const: brcm,bcm4912
+          - const: brcm,bcmbca
+
+      - description: BCM63138 based boards
+        items:
+          - enum:
+              - brcm,bcm963138
+              - brcm,BCM963138DVT
+          - const: brcm,bcm63138
+          - const: brcm,bcmbca
+
+      - description: BCM63146 based boards
+        items:
+          - enum:
+              - brcm,bcm963146
+          - const: brcm,bcm63146
+          - const: brcm,bcmbca
+
+      - description: BCM63148 based boards
+        items:
+          - enum:
+              - brcm,bcm963148
+          - const: brcm,bcm63148
+          - const: brcm,bcmbca
+
+      - description: BCM63158 based boards
+        items:
+          - enum:
+              - brcm,bcm963158
+          - const: brcm,bcm63158
+          - const: brcm,bcmbca
+
+      - description: BCM63178 based boards
+        items:
+          - enum:
+              - brcm,bcm963178
+          - const: brcm,bcm63178
+          - const: brcm,bcmbca
+
+      - description: BCM6756 based boards
+        items:
+          - enum:
+              - brcm,bcm96756
+          - const: brcm,bcm6756
+          - const: brcm,bcmbca
+
+      - description: BCM6813 based boards
+        items:
+          - enum:
+              - brcm,bcm96813
+          - const: brcm,bcm6813
+          - const: brcm,bcmbca
+
+      - description: BCM6846 based boards
+        items:
+          - enum:
+              - brcm,bcm96846
+          - const: brcm,bcm6846
+          - const: brcm,bcmbca
+
+      - description: BCM6855 based boards
+        items:
+          - enum:
+              - brcm,bcm96855
+          - const: brcm,bcm6855
+          - const: brcm,bcmbca
+
+      - description: BCM6856 based boards
+        items:
+          - enum:
+              - brcm,bcm96856
+          - const: brcm,bcm6856
+          - const: brcm,bcmbca
+
+      - description: BCM6858 based boards
+        items:
+          - enum:
+              - brcm,bcm96858
+          - const: brcm,bcm6858
+          - const: brcm,bcmbca
+
+      - description: BCM6878 based boards
+        items:
+          - enum:
+              - brcm,bcm96878
+          - const: brcm,bcm6878
+          - const: brcm,bcmbca
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
index 104cc9b41df4..071421dbc4d0 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
@@ -187,15 +187,8 @@ Required properties:
 Sequencer DRAM parameters and control registers. Used for Self-Refresh
 Power-Down (SRPD), among other things.
 
-Required properties:
-- compatible     : should contain one of these
-	"brcm,brcmstb-memc-ddr-rev-b.2.1"
-	"brcm,brcmstb-memc-ddr-rev-b.2.2"
-	"brcm,brcmstb-memc-ddr-rev-b.2.3"
-	"brcm,brcmstb-memc-ddr-rev-b.3.0"
-	"brcm,brcmstb-memc-ddr-rev-b.3.1"
-	"brcm,brcmstb-memc-ddr"
-- reg            : the MEMC DDR register range
+See Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml for a
+full list of supported compatible strings and properties.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt
deleted file mode 100644
index 4c77169bb534..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Broadcom Cygnus device tree bindings
-------------------------------------
-
-
-Boards with Cygnus SoCs shall have the following properties:
-
-Required root node property:
-
-BCM11300
-compatible = "brcm,bcm11300", "brcm,cygnus";
-
-BCM11320
-compatible = "brcm,bcm11320", "brcm,cygnus";
-
-BCM11350
-compatible = "brcm,bcm11350", "brcm,cygnus";
-
-BCM11360
-compatible = "brcm,bcm11360", "brcm,cygnus";
-
-BCM58300
-compatible = "brcm,bcm58300", "brcm,cygnus";
-
-BCM58302
-compatible = "brcm,bcm58302", "brcm,cygnus";
-
-BCM58303
-compatible = "brcm,bcm58303", "brcm,cygnus";
-
-BCM58305
-compatible = "brcm,bcm58305", "brcm,cygnus";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
new file mode 100644
index 000000000000..432ccf990f9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,cygnus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Cygnus device tree bindings
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11300
+          - brcm,bcm11320
+          - brcm,bcm11350
+          - brcm,bcm11360
+          - brcm,bcm58300
+          - brcm,bcm58302
+          - brcm,bcm58303
+          - brcm,bcm58305
+      - const: brcm,cygnus
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt
deleted file mode 100644
index a124c7fc4dcd..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Broadcom Hurricane 2 device tree bindings
----------------------------------------
-
-Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs
-are based on Broadcom's iProc SoC architecture and feature a single core Cortex
-A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND
-flash and a PCIe attached integrated switching engine.
-
-Boards with Hurricane SoCs shall have the following properties:
-
-Required root node property:
-
-BCM53342
-compatible = "brcm,bcm53342", "brcm,hr2";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
new file mode 100644
index 000000000000..294948399f82
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,hr2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Hurricane 2 device tree bindings
+
+description:
+  Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs
+  are based on Broadcom's iProc SoC architecture and feature a single core Cortex
+  A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND
+  flash and a PCIe attached integrated switching engine.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - ubnt,unifi-switch8
+      - const: brcm,bcm53342
+      - const: brcm,hr2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt
deleted file mode 100644
index 35f056f4a1c3..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-Broadcom North Star 2 (NS2) device tree bindings
-------------------------------------------------
-
-Boards with NS2 shall have the following properties:
-
-Required root node property:
-
-NS2 SVK board
-compatible = "brcm,ns2-svk", "brcm,ns2";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
new file mode 100644
index 000000000000..c4847abbecd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,ns2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom North Star 2 (NS2) device tree bindings
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,ns2-svk
+          - brcm,ns2-xmc
+      - const: brcm,ns2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
deleted file mode 100644
index 677ef9d9f445..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom Northstar Plus SoC CPU Enable Method
----------------------------------------------
-This binding defines the enable method used for starting secondary
-CPU in the following Broadcom SoCs:
-  BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
-
-The enable method is specified by defining the following required
-properties in the corresponding secondary "cpu" device tree node:
-  - enable-method = "brcm,bcm-nsp-smp";
-  - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register which should hold the common
-entry point for a secondary CPU. This entry is cpu node specific
-and should be added per cpu. E.g., in case of NSP (BCM58625) which
-is a dual core CPU SoC, this entry should be added to cpu1 node.
-
-
-Example:
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			enable-method = "brcm,bcm-nsp-smp";
-			secondary-boot-reg = <0xffff042c>;
-			reg = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt
deleted file mode 100644
index eae53e4556be..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Broadcom Northstar Plus device tree bindings
---------------------------------------------
-
-Broadcom Northstar Plus family of SoCs are used for switching control
-and management applications as well as residential router/gateway
-applications. The SoC features dual core Cortex A9 ARM CPUs, integrating
-several peripheral interfaces including multiple Gigabit Ethernet PHYs,
-DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash,
-SATA and several other IO controllers.
-
-Boards with Northstar Plus SoCs shall have the following properties:
-
-Required root node property:
-
-BCM58522
-compatible = "brcm,bcm58522", "brcm,nsp";
-
-BCM58525
-compatible = "brcm,bcm58525", "brcm,nsp";
-
-BCM58535
-compatible = "brcm,bcm58535", "brcm,nsp";
-
-BCM58622
-compatible = "brcm,bcm58622", "brcm,nsp";
-
-BCM58623
-compatible = "brcm,bcm58623", "brcm,nsp";
-
-BCM58625
-compatible = "brcm,bcm58625", "brcm,nsp";
-
-BCM88312
-compatible = "brcm,bcm88312", "brcm,nsp";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
new file mode 100644
index 000000000000..7d184ba7d180
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,nsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar Plus device tree bindings
+
+description:
+  Broadcom Northstar Plus family of SoCs are used for switching control
+  and management applications as well as residential router/gateway
+  applications. The SoC features dual core Cortex A9 ARM CPUs, integrating
+  several peripheral interfaces including multiple Gigabit Ethernet PHYs,
+  DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash,
+  SATA and several other IO controllers.
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM58522 based boards
+        items:
+          - enum:
+              - brcm,bcm958522er
+          - const: brcm,bcm58522
+          - const: brcm,nsp
+
+      - description: BCM58525 based boards
+        items:
+          - enum:
+              - brcm,bcm958525er
+              - brcm,bcm958525xmc
+          - const: brcm,bcm58525
+          - const: brcm,nsp
+
+      - description: BCM58535 based boards
+        items:
+          - const: brcm,bcm58535
+          - const: brcm,nsp
+
+      - description: BCM58622 based boards
+        items:
+          - enum:
+              - brcm,bcm958622hr
+          - const: brcm,bcm58622
+          - const: brcm,nsp
+
+      - description: BCM58623 based boards
+        items:
+          - enum:
+              - brcm,bcm958623hr
+          - const: brcm,bcm58623
+          - const: brcm,nsp
+
+      - description: BCM58625 based boards
+        items:
+          - enum:
+              - brcm,bcm958625hr
+              - brcm,bcm958625k
+              - meraki,mx64
+              - meraki,mx64-a0
+              - meraki,mx64w
+              - meraki,mx64w-a0
+              - meraki,mx65
+              - meraki,mx65w
+          - const: brcm,bcm58625
+          - const: brcm,nsp
+
+      - description: BCM88312 based boards
+        items:
+          - enum:
+              - brcm,bcm988312hr
+          - const: brcm,bcm88312
+          - const: brcm,nsp
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
deleted file mode 100644
index 23a02178dd44..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Broadcom Stingray device tree bindings
-------------------------------------------------
-
-Boards with Stingray shall have the following properties:
-
-Required root node property:
-
-Stingray Combo SVK board
-compatible = "brcm,bcm958742k", "brcm,stingray";
-
-Stingray SST100 board
-compatible = "brcm,bcm958742t", "brcm,stingray";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
new file mode 100644
index 000000000000..c638e04ebae0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,stingray.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Stingray device tree bindings
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm958742k
+          - brcm,bcm958742t
+          - brcm,bcm958802a802x
+      - const: brcm,stingray
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt
deleted file mode 100644
index 223ed3471c08..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Broadcom Vulcan device tree bindings
-------------------------------------
-
-Boards with Broadcom Vulcan shall have the following root property:
-
-Broadcom Vulcan Evaluation Board:
-  compatible = "brcm,vulcan-eval", "brcm,vulcan-soc";
-
-Generic Vulcan board:
-  compatible = "brcm,vulcan-soc";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
new file mode 100644
index 000000000000..4eba182abd53
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,vulcan-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Vulcan device tree bindings
+
+maintainers:
+  - Robert Richter <rrichter@marvell.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,vulcan-eval
+          - cavium,thunderx2-cn9900
+      - const: brcm,vulcan-soc
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
deleted file mode 100644
index 6824b3180ffb..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Raspberry Pi VideoCore firmware driver
-
-Required properties:
-
-- compatible:		Should be "raspberrypi,bcm2835-firmware"
-- mboxes:		Phandle to the firmware device's Mailbox.
-			  (See: ../mailbox/mailbox.txt for more information)
-
-Example:
-
-firmware {
-	compatible = "raspberrypi,bcm2835-firmware";
-	mboxes = <&mailbox>;
-};
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
new file mode 100644
index 000000000000..b369b374fc4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi VideoCore firmware driver
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+  - Stefan Wahren <wahrenst@gmx.net>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: raspberrypi,bcm2835-firmware
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: raspberrypi,bcm2835-firmware
+      - const: simple-mfd
+
+  mboxes:
+    maxItems: 1
+
+  clocks:
+    type: object
+
+    properties:
+      compatible:
+        const: raspberrypi,firmware-clocks
+
+      "#clock-cells":
+        const: 1
+        description: >
+          The argument is the ID of the clocks contained by the
+          firmware messages.
+
+    required:
+      - compatible
+      - "#clock-cells"
+
+  reset:
+    type: object
+
+    properties:
+      compatible:
+        const: raspberrypi,firmware-reset
+
+      "#reset-cells":
+        const: 1
+        description: >
+          The argument is the ID of the firmware reset line to affect.
+
+    required:
+      - compatible
+      - "#reset-cells"
+
+  pwm:
+    type: object
+
+    properties:
+      compatible:
+        const: raspberrypi,firmware-poe-pwm
+
+      "#pwm-cells":
+        # See pwm.yaml in this directory for a description of the cells format.
+        const: 2
+
+    required:
+      - compatible
+      - "#pwm-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+        compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+        mboxes = <&mailbox>;
+
+        firmware_clocks: clocks {
+            compatible = "raspberrypi,firmware-clocks";
+            #clock-cells = <1>;
+        };
+
+        reset: reset {
+            compatible = "raspberrypi,firmware-reset";
+            #reset-cells = <1>;
+        };
+
+        pwm: pwm {
+            compatible = "raspberrypi,firmware-poe-pwm";
+            #pwm-cells = <2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/bitmain.yaml b/Documentation/devicetree/bindings/arm/bitmain.yaml
index 0efdb4ac028e..55a5a570b5bc 100644
--- a/Documentation/devicetree/bindings/arm/bitmain.yaml
+++ b/Documentation/devicetree/bindings/arm/bitmain.yaml
@@ -4,15 +4,20 @@
 $id: http://devicetree.org/schemas/arm/bitmain.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bitmain platform device tree bindings
+title: Bitmain platform
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     items:
       - enum:
-        - bitmain,sophon-edge
+          - bitmain,sophon-edge
       - const: bitmain,bm1880
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/calxeda.yaml b/Documentation/devicetree/bindings/arm/calxeda.yaml
index aa5571d23c39..3e9f5e1d862e 100644
--- a/Documentation/devicetree/bindings/arm/calxeda.yaml
+++ b/Documentation/devicetree/bindings/arm/calxeda.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/calxeda.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Calxeda Platforms Device Tree Bindings
+title: Calxeda Platforms
 
 maintainers:
   - Rob Herring <robh@kernel.org>
@@ -20,3 +20,5 @@ properties:
       - enum:
           - calxeda,highbank
           - calxeda,ecx-2000
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml b/Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml
new file mode 100644
index 000000000000..dfdc97083efb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/calxeda/hb-sregs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank system registers
+
+description: |
+  The Calxeda Highbank system has a block of MMIO registers controlling
+  several generic system aspects. Those can be used to control some power
+  management, they also contain some gate and PLL clocks.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: calxeda,hb-sregs
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    type: object
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sregs@fff3c000 {
+        compatible = "calxeda,hb-sregs";
+        reg = <0xfff3c000 0x1000>;
+
+        clocks {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            osc: oscillator {
+                #clock-cells = <0>;
+                compatible = "fixed-clock";
+                clock-frequency = <33333000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt
deleted file mode 100644
index 94e642a33db0..000000000000
--- a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Calxeda Highbank L2 cache ECC
-
-Properties:
-- compatible : Should be "calxeda,hb-sregs-l2-ecc"
-- reg : Address and size for ECC error interrupt clear registers.
-- interrupts : Should be single bit error interrupt, then double bit error
-	interrupt.
-
-Example:
-
-	sregs@fff3c200 {
-		compatible = "calxeda,hb-sregs-l2-ecc";
-		reg = <0xfff3c200 0x100>;
-		interrupts = <0 71 4  0 72 4>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml
new file mode 100644
index 000000000000..a9fe01238a88
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/calxeda/l2ecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank L2 cache ECC
+
+description: |
+  Binding for the Calxeda Highbank L2 cache controller ECC device.
+  This does not cover the actual L2 cache controller control registers,
+  but just the error reporting functionality.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: "calxeda,hb-sregs-l2-ecc"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: single bit error interrupt
+      - description: double bit error interrupt
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    sregs@fff3c200 {
+        compatible = "calxeda,hb-sregs-l2-ecc";
+        reg = <0xfff3c200 0x100>;
+        interrupts = <0 71 4>, <0 72 4>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/cci-control-port.yaml b/Documentation/devicetree/bindings/arm/cci-control-port.yaml
new file mode 100644
index 000000000000..c9114866213f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cci-control-port.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cci-control-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CCI Interconnect Bus Masters binding
+
+maintainers:
+  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+
+description: |
+  Masters in the device tree connected to a CCI port (inclusive of CPUs
+  and their cpu nodes).
+
+select: true
+
+properties:
+  cci-control-port:
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+additionalProperties: true
+
+examples:
+  - |
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a15";
+            device_type = "cpu";
+            cci-control-port = <&cci_control1>;
+            reg = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
deleted file mode 100644
index 9600761f2d5b..000000000000
--- a/Documentation/devicetree/bindings/arm/cci.txt
+++ /dev/null
@@ -1,224 +0,0 @@
-=======================================================
-ARM CCI cache coherent interconnect binding description
-=======================================================
-
-ARM multi-cluster systems maintain intra-cluster coherency through a
-cache coherent interconnect (CCI) that is capable of monitoring bus
-transactions and manage coherency, TLB invalidations and memory barriers.
-
-It allows snooping and distributed virtual memory message broadcast across
-clusters, through memory mapped interface, with a global control register
-space and multiple sets of interface control registers, one per slave
-interface.
-
-* CCI interconnect node
-
-	Description: Describes a CCI cache coherent Interconnect component
-
-	Node name must be "cci".
-	Node's parent must be the root node /, and the address space visible
-	through the CCI interconnect is the same as the one seen from the
-	root node (ie from CPUs perspective as per DT standard).
-	Every CCI node has to define the following properties:
-
-	- compatible
-		Usage: required
-		Value type: <string>
-		Definition: must contain one of the following:
-			    "arm,cci-400"
-			    "arm,cci-500"
-			    "arm,cci-550"
-
-	- reg
-		Usage: required
-		Value type: Integer cells. A register entry, expressed as a pair
-			    of cells, containing base and size.
-		Definition: A standard property. Specifies base physical
-			    address of CCI control registers common to all
-			    interfaces.
-
-	- ranges:
-		Usage: required
-		Value type: Integer cells. An array of range entries, expressed
-			    as a tuple of cells, containing child address,
-			    parent address and the size of the region in the
-			    child address space.
-		Definition: A standard property. Follow rules in the Devicetree
-			    Specification for hierarchical bus addressing. CCI
-			    interfaces addresses refer to the parent node
-			    addressing scheme to declare their register bases.
-
-	CCI interconnect node can define the following child nodes:
-
-	- CCI control interface nodes
-
-		Node name must be "slave-if".
-		Parent node must be CCI interconnect node.
-
-		A CCI control interface node must contain the following
-		properties:
-
-		- compatible
-			Usage: required
-			Value type: <string>
-			Definition: must be set to
-				    "arm,cci-400-ctrl-if"
-
-		- interface-type:
-			Usage: required
-			Value type: <string>
-			Definition: must be set to one of {"ace", "ace-lite"}
-				    depending on the interface type the node
-				    represents.
-
-		- reg:
-			Usage: required
-			Value type: Integer cells. A register entry, expressed
-				    as a pair of cells, containing base and
-				    size.
-			Definition: the base address and size of the
-				    corresponding interface programming
-				    registers.
-
-	- CCI PMU node
-
-		Parent node must be CCI interconnect node.
-
-		A CCI pmu node must contain the following properties:
-
-		- compatible
-			Usage: required
-			Value type: <string>
-			Definition: Must contain one of:
-				 "arm,cci-400-pmu,r0"
-				 "arm,cci-400-pmu,r1"
-				 "arm,cci-400-pmu"  - DEPRECATED, permitted only where OS has
-						      secure access to CCI registers
-				 "arm,cci-500-pmu,r0"
-				 "arm,cci-550-pmu,r0"
-		- reg:
-			Usage: required
-			Value type: Integer cells. A register entry, expressed
-				    as a pair of cells, containing base and
-				    size.
-			Definition: the base address and size of the
-				    corresponding interface programming
-				    registers.
-
-		- interrupts:
-			Usage: required
-			Value type: Integer cells. Array of interrupt specifier
-				    entries, as defined in
-				    ../interrupt-controller/interrupts.txt.
-			Definition: list of counter overflow interrupts, one per
-				    counter. The interrupts must be specified
-				    starting with the cycle counter overflow
-				    interrupt, followed by counter0 overflow
-				    interrupt, counter1 overflow interrupt,...
-				    ,counterN overflow interrupt.
-
-				    The CCI PMU has an interrupt signal for each
-				    counter. The number of interrupts must be
-				    equal to the number of counters.
-
-* CCI interconnect bus masters
-
-	Description: masters in the device tree connected to a CCI port
-		     (inclusive of CPUs and their cpu nodes).
-
-	A CCI interconnect bus master node must contain the following
-	properties:
-
-	- cci-control-port:
-		Usage: required
-		Value type: <phandle>
-		Definition: a phandle containing the CCI control interface node
-			    the master is connected to.
-
-Example:
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			cci-control-port = <&cci_control1>;
-			reg = <0x0>;
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			cci-control-port = <&cci_control1>;
-			reg = <0x1>;
-		};
-
-		CPU2: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			cci-control-port = <&cci_control2>;
-			reg = <0x100>;
-		};
-
-		CPU3: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			cci-control-port = <&cci_control2>;
-			reg = <0x101>;
-		};
-
-	};
-
-	dma0: dma@3000000 {
-		compatible = "arm,pl330", "arm,primecell";
-		cci-control-port = <&cci_control0>;
-		reg = <0x0 0x3000000 0x0 0x1000>;
-		interrupts = <10>;
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-	};
-
-	cci@2c090000 {
-		compatible = "arm,cci-400";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x0 0x2c090000 0 0x1000>;
-		ranges = <0x0 0x0 0x2c090000 0x10000>;
-
-		cci_control0: slave-if@1000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace-lite";
-			reg = <0x1000 0x1000>;
-		};
-
-		cci_control1: slave-if@4000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x4000 0x1000>;
-		};
-
-		cci_control2: slave-if@5000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x5000 0x1000>;
-		};
-
-		pmu@9000 {
-			 compatible = "arm,cci-400-pmu";
-			 reg = <0x9000 0x5000>;
-			 interrupts = <0 101 4>,
-				      <0 102 4>,
-				      <0 103 4>,
-				      <0 104 4>,
-				      <0 105 4>;
-		};
-	};
-
-This CCI node corresponds to a CCI component whose control registers sits
-at address 0x000000002c090000.
-CCI slave interface @0x000000002c091000 is connected to dma controller dma0.
-CCI slave interface @0x000000002c094000 is connected to CPUs {CPU0, CPU1};
-CCI slave interface @0x000000002c095000 is connected to CPUs {CPU2, CPU3};
diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
deleted file mode 100644
index f1de3247c1b7..000000000000
--- a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* CoreSight CPU Debug Component:
-
-CoreSight CPU debug component are compliant with the ARMv8 architecture
-reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
-external debug module is mainly used for two modes: self-hosted debug and
-external debug, and it can be accessed from mmio region from Coresight
-and eventually the debug module connects with CPU for debugging. And the
-debug module provides sample-based profiling extension, which can be used
-to sample CPU program counter, secure state and exception level, etc;
-usually every CPU has one dedicated debug module to be connected.
-
-Required properties:
-
-- compatible : should be "arm,coresight-cpu-debug"; supplemented with
-               "arm,primecell" since this driver is using the AMBA bus
-	       interface.
-
-- reg : physical base address and length of the register set.
-
-- clocks : the clock associated to this component.
-
-- clock-names : the name of the clock referenced by the code. Since we are
-                using the AMBA framework, the name of the clock providing
-		the interconnect should be "apb_pclk" and the clock is
-		mandatory. The interface between the debug logic and the
-		processor core is clocked by the internal CPU clock, so it
-		is enabled with CPU clock by default.
-
-- cpu : the CPU phandle the debug module is affined to. Do not assume it
-        to default to CPU0 if omitted.
-
-Optional properties:
-
-- power-domains: a phandle to the debug power domain. We use "power-domains"
-                 binding to turn on the debug logic if it has own dedicated
-		 power domain and if necessary to use "cpuidle.off=1" or
-		 "nohlt" in the kernel command line or sysfs node to
-		 constrain idle states to ensure registers in the CPU power
-		 domain are accessible.
-
-Example:
-
-	debug@f6590000 {
-		compatible = "arm,coresight-cpu-debug","arm,primecell";
-		reg = <0 0xf6590000 0 0x1000>;
-		clocks = <&sys_ctrl HI6220_DAPB_CLK>;
-		clock-names = "apb_pclk";
-		cpu = <&cpu0>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
deleted file mode 100644
index d02c42d21f2f..000000000000
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ /dev/null
@@ -1,374 +0,0 @@
-* CoreSight Components:
-
-CoreSight components are compliant with the ARM CoreSight architecture
-specification and can be connected in various topologies to suit a particular
-SoCs tracing needs. These trace components can generally be classified as
-sinks, links and sources. Trace data produced by one or more sources flows
-through the intermediate links connecting the source to the currently selected
-sink. Each CoreSight component device should use these properties to describe
-its hardware characteristcs.
-
-* Required properties for all components *except* non-configurable replicators
-  and non-configurable funnels:
-
-	* compatible: These have to be supplemented with "arm,primecell" as
-	  drivers are using the AMBA bus interface.  Possible values include:
-		- Embedded Trace Buffer (version 1.0):
-			"arm,coresight-etb10", "arm,primecell";
-
-		- Trace Port Interface Unit:
-			"arm,coresight-tpiu", "arm,primecell";
-
-		- Trace Memory Controller, used for Embedded Trace Buffer(ETB),
-		  Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR)
-		  configuration.  The configuration mode (ETB, ETF, ETR) is
-		  discovered at boot time when the device is probed.
-			"arm,coresight-tmc", "arm,primecell";
-
-		- Trace Programmable Funnel:
-			"arm,coresight-dynamic-funnel", "arm,primecell";
-			"arm,coresight-funnel", "arm,primecell"; (OBSOLETE. For
-				backward compatibility and will be removed)
-
-		- Embedded Trace Macrocell (version 3.x) and
-					Program Flow Trace Macrocell:
-			"arm,coresight-etm3x", "arm,primecell";
-
-		- Embedded Trace Macrocell (version 4.x):
-			"arm,coresight-etm4x", "arm,primecell";
-
-		- Coresight programmable Replicator :
-			"arm,coresight-dynamic-replicator", "arm,primecell";
-
-		- System Trace Macrocell:
-			"arm,coresight-stm", "arm,primecell"; [1]
-		- Coresight Address Translation Unit (CATU)
-			"arm,coresight-catu", "arm,primecell";
-
-	* reg: physical base address and length of the register
-	  set(s) of the component.
-
-	* clocks: the clocks associated to this component.
-
-	* clock-names: the name of the clocks referenced by the code.
-	  Since we are using the AMBA framework, the name of the clock
-	  providing the interconnect should be "apb_pclk", and some
-	  coresight blocks also have an additional clock "atclk", which
-	  clocks the core of that coresight component. The latter clock
-	  is optional.
-
-	* port or ports: see "Graph bindings for Coresight" below.
-
-* Additional required property for Embedded Trace Macrocell (version 3.x and
-  version 4.x):
-	* cpu: the cpu phandle this ETM/PTM is affined to. Do not
-	  assume it to default to CPU0 if omitted.
-
-* Additional required properties for System Trace Macrocells (STM):
-	* reg: along with the physical base address and length of the register
-	  set as described above, another entry is required to describe the
-	  mapping of the extended stimulus port area.
-
-	* reg-names: the only acceptable values are "stm-base" and
-	  "stm-stimulus-base", each corresponding to the areas defined in "reg".
-
-* Required properties for devices that don't show up on the AMBA bus, such as
-  non-configurable replicators and non-configurable funnels:
-
-	* compatible: Currently supported value is (note the absence of the
-	  AMBA markee):
-		- Coresight Non-configurable Replicator:
-			"arm,coresight-static-replicator";
-			"arm,coresight-replicator"; (OBSOLETE. For backward
-				compatibility and will be removed)
-
-		- Coresight Non-configurable Funnel:
-			"arm,coresight-static-funnel";
-
-	* port or ports: see "Graph bindings for Coresight" below.
-
-* Optional properties for all components:
-
-	* arm,coresight-loses-context-with-cpu : boolean. Indicates that the
-	  hardware will lose register context on CPU power down (e.g. CPUIdle).
-	  An example of where this may be needed are systems which contain a
-	  coresight component and CPU in the same power domain. When the CPU
-	  powers down the coresight component also powers down and loses its
-	  context. This property is currently only used for the ETM 4.x driver.
-
-* Optional properties for ETM/PTMs:
-
-	* arm,cp14: must be present if the system accesses ETM/PTM management
-	  registers via co-processor 14.
-
-* Optional property for TMC:
-
-	* arm,buffer-size: size of contiguous buffer space for TMC ETR
-	  (embedded trace router). This property is obsolete. The buffer size
-	  can be configured dynamically via buffer_size property in sysfs.
-
-	* arm,scatter-gather: boolean. Indicates that the TMC-ETR can safely
-	  use the SG mode on this system.
-
-* Optional property for CATU :
-	* interrupts : Exactly one SPI may be listed for reporting the address
-	  error
-
-Graph bindings for Coresight
--------------------------------
-
-Coresight components are interconnected to create a data path for the flow of
-trace data generated from the "sources" to their collection points "sink".
-Each coresight component must describe the "input" and "output" connections.
-The connections must be described via generic DT graph bindings as described
-by the "bindings/graph.txt", where each "port" along with an "endpoint"
-component represents a hardware port and the connection.
-
- * All output ports must be listed inside a child node named "out-ports"
- * All input ports must be listed inside a child node named "in-ports".
- * Port address must match the hardware port number.
-
-Example:
-
-1. Sinks
-	etb@20010000 {
-		compatible = "arm,coresight-etb10", "arm,primecell";
-		reg = <0 0x20010000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etb_in_port: endpoint@0 {
-					remote-endpoint = <&replicator_out_port0>;
-				};
-			};
-		};
-	};
-
-	tpiu@20030000 {
-		compatible = "arm,coresight-tpiu", "arm,primecell";
-		reg = <0 0x20030000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				tpiu_in_port: endpoint@0 {
-					remote-endpoint = <&replicator_out_port1>;
-				};
-			};
-		};
-	};
-
-	etr@20070000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0 0x20070000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etr_in_port: endpoint {
-					remote-endpoint = <&replicator2_out_port0>;
-				};
-			};
-		};
-
-		out-ports {
-			port {
-				etr_out_port: endpoint {
-					remote-endpoint = <&catu_in_port>;
-				};
-			};
-		};
-	};
-
-2. Links
-	replicator {
-		/* non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-static-replicator";
-
-		out-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&etb_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
-				};
-			};
-		};
-
-		in-ports {
-			port {
-				replicator_in_port0: endpoint {
-					remote-endpoint = <&funnel_out_port0>;
-				};
-			};
-		};
-	};
-
-	funnel {
-		/*
-		 * non-configurable funnel don't show up on the AMBA
-		 * bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-static-funnel";
-		clocks = <&crg_ctrl HI3660_PCLK>;
-		clock-names = "apb_pclk";
-
-		out-ports {
-			port {
-				combo_funnel_out: endpoint {
-					remote-endpoint = <&top_funnel_in>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				combo_funnel_in0: endpoint {
-					remote-endpoint = <&cluster0_etf_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				combo_funnel_in1: endpoint {
-					remote-endpoint = <&cluster1_etf_out>;
-				};
-			};
-		};
-	};
-
-	funnel@20040000 {
-		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-		reg = <0 0x20040000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				funnel_out_port0: endpoint {
-					remote-endpoint =
-							<&replicator_in_port0>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				funnel_in_port0: endpoint {
-					remote-endpoint = <&ptm0_out_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				funnel_in_port1: endpoint {
-					remote-endpoint = <&ptm1_out_port>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				funnel_in_port2: endpoint {
-					remote-endpoint = <&etm0_out_port>;
-				};
-			};
-
-		};
-	};
-
-3. Sources
-	ptm@2201c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2201c000 0 0x1000>;
-
-		cpu = <&cpu0>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				ptm0_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port0>;
-				};
-			};
-		};
-	};
-
-	ptm@2201d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2201d000 0 0x1000>;
-
-		cpu = <&cpu1>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				ptm1_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port1>;
-				};
-			};
-		};
-	};
-
-4. STM
-	stm@20100000 {
-		compatible = "arm,coresight-stm", "arm,primecell";
-		reg = <0 0x20100000 0 0x1000>,
-		      <0 0x28000000 0 0x180000>;
-		reg-names = "stm-base", "stm-stimulus-base";
-
-		clocks = <&soc_smc50mhz>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				stm_out_port: endpoint {
-					remote-endpoint = <&main_funnel_in_port2>;
-				};
-			};
-		};
-	};
-
-5. CATU
-
-	catu@207e0000 {
-		compatible = "arm,coresight-catu", "arm,primecell";
-		reg = <0 0x207e0000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-		in-ports {
-			port {
-				catu_in_port: endpoint {
-					remote-endpoint = <&etr_out_port>;
-				};
-			};
-		};
-	};
-
-[1]. There is currently two version of STM: STM32 and STM500.  Both
-have the same HW interface and as such don't need an explicit binding name.
diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt b/Documentation/devicetree/bindings/arm/cpu-capacity.txt
index 380e21c5fc7e..cc5e190390b7 100644
--- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt
+++ b/Documentation/devicetree/bindings/arm/cpu-capacity.txt
@@ -62,8 +62,8 @@ Example 1 (ARM 64-bit, 6-cpu system, two clusters):
 The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024)
 are 1024 and 578 for cluster0 and cluster1. Further normalization
 is done by the operating system based on cluster0@max-freq=1100 and
-custer1@max-freq=850, final capacities are 1024 for cluster0 and
-446 for cluster1 (576*850/1100).
+cluster1@max-freq=850, final capacities are 1024 for cluster0 and
+446 for cluster1 (578*850/1100).
 
 cpus {
 	#address-cells = <2>;
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 0d5b61056b10..5c13b73e4d57 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -85,6 +85,8 @@ properties:
 
   compatible:
     enum:
+      - apple,icestorm
+      - apple,firestorm
       - arm,arm710t
       - arm,arm720t
       - arm,arm740t
@@ -123,11 +125,22 @@ properties:
       - arm,cortex-a12
       - arm,cortex-a15
       - arm,cortex-a17
+      - arm,cortex-a32
+      - arm,cortex-a34
+      - arm,cortex-a35
       - arm,cortex-a53
       - arm,cortex-a55
       - arm,cortex-a57
+      - arm,cortex-a65
       - arm,cortex-a72
       - arm,cortex-a73
+      - arm,cortex-a75
+      - arm,cortex-a76
+      - arm,cortex-a77
+      - arm,cortex-a78
+      - arm,cortex-a78ae
+      - arm,cortex-a510
+      - arm,cortex-a710
       - arm,cortex-m0
       - arm,cortex-m0+
       - arm,cortex-m1
@@ -136,6 +149,12 @@ properties:
       - arm,cortex-r4
       - arm,cortex-r5
       - arm,cortex-r7
+      - arm,cortex-x1
+      - arm,cortex-x2
+      - arm,neoverse-e1
+      - arm,neoverse-n1
+      - arm,neoverse-n2
+      - arm,neoverse-v1
       - brcm,brahma-b15
       - brcm,brahma-b53
       - brcm,vulcan
@@ -155,76 +174,93 @@ properties:
       - nvidia,tegra194-carmel
       - qcom,krait
       - qcom,kryo
+      - qcom,kryo240
+      - qcom,kryo250
+      - qcom,kryo260
+      - qcom,kryo280
       - qcom,kryo385
+      - qcom,kryo468
       - qcom,kryo485
+      - qcom,kryo560
+      - qcom,kryo570
+      - qcom,kryo685
+      - qcom,kryo780
       - qcom,scorpion
 
   enable-method:
-    allOf:
-      - $ref: '/schemas/types.yaml#/definitions/string'
-      - oneOf:
-          # On ARM v8 64-bit this property is required
-          - enum:
-              - psci
-              - spin-table
-          # On ARM 32-bit systems this property is optional
-          - enum:
-              - actions,s500-smp
-              - allwinner,sun6i-a31
-              - allwinner,sun8i-a23
-              - allwinner,sun9i-a80-smp
-              - allwinner,sun8i-a83t-smp
-              - amlogic,meson8-smp
-              - amlogic,meson8b-smp
-              - arm,realview-smp
-              - aspeed,ast2600-smp
-              - brcm,bcm11351-cpu-method
-              - brcm,bcm23550
-              - brcm,bcm2836-smp
-              - brcm,bcm63138
-              - brcm,bcm-nsp-smp
-              - brcm,brahma-b15
-              - marvell,armada-375-smp
-              - marvell,armada-380-smp
-              - marvell,armada-390-smp
-              - marvell,armada-xp-smp
-              - marvell,98dx3236-smp
-              - marvell,mmp3-smp
-              - mediatek,mt6589-smp
-              - mediatek,mt81xx-tz-smp
-              - qcom,gcc-msm8660
-              - qcom,kpss-acc-v1
-              - qcom,kpss-acc-v2
-              - renesas,apmu
-              - renesas,r9a06g032-smp
-              - rockchip,rk3036-smp
-              - rockchip,rk3066-smp
-              - socionext,milbeaut-m10v-smp
-              - ste,dbx500-smp
+    $ref: '/schemas/types.yaml#/definitions/string'
+    oneOf:
+      # On ARM v8 64-bit this property is required
+      - enum:
+          - psci
+          - spin-table
+      # On ARM 32-bit systems this property is optional
+      - enum:
+          - actions,s500-smp
+          - allwinner,sun6i-a31
+          - allwinner,sun8i-a23
+          - allwinner,sun9i-a80-smp
+          - allwinner,sun8i-a83t-smp
+          - amlogic,meson8-smp
+          - amlogic,meson8b-smp
+          - arm,realview-smp
+          - aspeed,ast2600-smp
+          - brcm,bcm11351-cpu-method
+          - brcm,bcm23550
+          - brcm,bcm2836-smp
+          - brcm,bcm63138
+          - brcm,bcm-nsp-smp
+          - brcm,brahma-b15
+          - marvell,armada-375-smp
+          - marvell,armada-380-smp
+          - marvell,armada-390-smp
+          - marvell,armada-xp-smp
+          - marvell,98dx3236-smp
+          - marvell,mmp3-smp
+          - mediatek,mt6589-smp
+          - mediatek,mt81xx-tz-smp
+          - qcom,gcc-msm8660
+          - qcom,kpss-acc-v1
+          - qcom,kpss-acc-v2
+          - qcom,msm8226-smp
+          - qcom,msm8909-smp
+          # Only valid on ARM 32-bit, see above for ARM v8 64-bit
+          - qcom,msm8916-smp
+          - renesas,apmu
+          - renesas,r9a06g032-smp
+          - rockchip,rk3036-smp
+          - rockchip,rk3066-smp
+          - socionext,milbeaut-m10v-smp
+          - ste,dbx500-smp
+          - ti,am3352
+          - ti,am4372
 
   cpu-release-addr:
-    $ref: '/schemas/types.yaml#/definitions/uint64'
-
+    oneOf:
+      - $ref: '/schemas/types.yaml#/definitions/uint32'
+      - $ref: '/schemas/types.yaml#/definitions/uint64'
     description:
+      The DT specification defines this as 64-bit always, but some 32-bit Arm
+      systems have used a 32-bit value which must be supported.
       Required for systems that have an "enable-method"
         property value of "spin-table".
-      On ARM v8 64-bit systems must be a two cell
-        property identifying a 64-bit zero-initialised
-        memory location.
 
   cpu-idle-states:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      maxItems: 1
     description: |
       List of phandles to idle state nodes supported
       by this cpu (see ./idle-states.yaml).
 
   capacity-dmips-mhz:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
     description:
       u32 value representing CPU capacity (see ./cpu-capacity.txt) in
       DMIPS/MHz, relative to highest capacity-dmips-mhz
       in the system.
 
+  cci-control-port: true
+
   dynamic-power-coefficient:
     $ref: '/schemas/types.yaml#/definitions/uint32'
     description:
@@ -242,14 +278,19 @@ properties:
 
       where voltage is in V, frequency is in MHz.
 
+  performance-domains:
+    maxItems: 1
+    description:
+      List of phandles and performance domain specifiers, as defined by
+      bindings of the performance domain provider. See also
+      dvfs/performance-domain.yaml.
+
   power-domains:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
     description:
       List of phandles and PM domain specifiers, as defined by bindings of the
       PM domain provider (see also ../power_domain.txt).
 
   power-domain-names:
-    $ref: '/schemas/types.yaml#/definitions/string-array'
     description:
       A list of power domain name strings sorted in the same order as the
       power-domains property.
@@ -273,7 +314,8 @@ properties:
       Specifies the ACC* node associated with this CPU.
 
       Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
+      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2", "qcom,msm8226-smp" or
+      "qcom,msm8916-smp".
 
       * arm/msm/qcom,kpss-acc.txt
 
@@ -287,6 +329,39 @@ properties:
       While optional, it is the preferred way to get access to
       the cpu-core power-domains.
 
+  secondary-boot-reg:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: |
+      Required for systems that have an "enable-method" property value of
+      "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".
+
+      This includes the following SoCs: |
+      BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550
+      BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
+
+      The secondary-boot-reg property is a u32 value that specifies the
+      physical address of the register used to request the ROM holding pen
+      code release a secondary CPU. The value written to the register is
+      formed by encoding the target CPU id into the low bits of the
+      physical start address it should jump to.
+
+if:
+  # If the enable-method property contains one of those values
+  properties:
+    enable-method:
+      contains:
+        enum:
+          - brcm,bcm11351-cpu-method
+          - brcm,bcm23550
+          - brcm,bcm-nsp-smp
+  # and if enable-method is present
+  required:
+    - enable-method
+
+then:
+  required:
+    - secondary-boot-reg
+
 required:
   - device_type
   - reg
@@ -295,6 +370,8 @@ required:
 dependencies:
   rockchip,pmu: [enable-method]
 
+additionalProperties: true
+
 examples:
   - |
     cpus {
diff --git a/Documentation/devicetree/bindings/arm/digicolor.yaml b/Documentation/devicetree/bindings/arm/digicolor.yaml
index d9c80b827e9b..0cf9ddaa527e 100644
--- a/Documentation/devicetree/bindings/arm/digicolor.yaml
+++ b/Documentation/devicetree/bindings/arm/digicolor.yaml
@@ -4,13 +4,17 @@
 $id: http://devicetree.org/schemas/arm/digicolor.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Conexant Digicolor Platforms Device Tree Bindings
+title: Conexant Digicolor Platforms
 
 maintainers:
   - Baruch Siach <baruch@tkos.co.il>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     const: cnxt,cx92755
 
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt
deleted file mode 100644
index d38834c67dff..000000000000
--- a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-OP-TEE Device Tree Bindings
-
-OP-TEE is a piece of software using hardware features to provide a Trusted
-Execution Environment. The security can be provided with ARM TrustZone, but
-also by virtualization or a separate chip.
-
-We're using "linaro" as the first part of the compatible property for
-the reference implementation maintained by Linaro.
-
-* OP-TEE based on ARM TrustZone required properties:
-
-- compatible     : should contain "linaro,optee-tz"
-
-- method         : The method of calling the OP-TEE Trusted OS. Permitted
-                   values are:
-
-                   "smc" : SMC #0, with the register assignments specified
-		           in drivers/tee/optee/optee_smc.h
-
-                   "hvc" : HVC #0, with the register assignments specified
-		           in drivers/tee/optee/optee_smc.h
-
-
-
-Example:
-	firmware {
-		optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml
new file mode 100644
index 000000000000..9a426110a14a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/firmware/linaro,optee-tz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OP-TEE Device Tree Bindings
+
+maintainers:
+  - Jens Wiklander <jens.wiklander@linaro.org>
+
+description: |
+  OP-TEE is a piece of software using hardware features to provide a Trusted
+  Execution Environment. The security can be provided with ARM TrustZone, but
+  also by virtualization or a separate chip.
+
+  We're using "linaro" as the first part of the compatible property for
+  the reference implementation maintained by Linaro.
+
+properties:
+  $nodename:
+    const: optee
+
+  compatible:
+    const: linaro,optee-tz
+
+  interrupts:
+    maxItems: 1
+    description: |
+      This interrupt which is used to signal an event by the secure world
+      software is expected to be edge-triggered.
+
+  method:
+    enum: [smc, hvc]
+    description: |
+      The method of calling the OP-TEE Trusted OS depending on smc or hvc
+      instruction usage.
+      SMC #0, register assignments
+      or
+      HVC #0, register assignments
+      register assignments are specified in drivers/tee/optee/optee_smc.h
+
+required:
+  - compatible
+  - method
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    firmware  {
+        optee  {
+            compatible = "linaro,optee-tz";
+            method = "smc";
+            interrupts = <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+
+  - |
+    firmware  {
+        optee  {
+            compatible = "linaro,optee-tz";
+            method = "hvc";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt
deleted file mode 100644
index 780d0392a66b..000000000000
--- a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Trusted Foundations
--------------------
-
-Boards that use the Trusted Foundations secure monitor can signal its
-presence by declaring a node compatible with "tlm,trusted-foundations"
-under the /firmware/ node
-
-Required properties:
-- compatible: "tlm,trusted-foundations"
-- tlm,version-major: major version number of Trusted Foundations firmware
-- tlm,version-minor: minor version number of Trusted Foundations firmware
-
-Example:
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <2>;
-			tlm,version-minor = <8>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml
new file mode 100644
index 000000000000..9d1857c0aa07
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/firmware/tlm,trusted-foundations.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Trusted Foundations
+
+description: |
+  Boards that use the Trusted Foundations secure monitor can signal its
+  presence by declaring a node compatible under the /firmware/ node
+
+maintainers:
+  - Stephen Warren <swarren@nvidia.com>
+
+properties:
+  $nodename:
+    const: trusted-foundations
+
+  compatible:
+    const: tlm,trusted-foundations
+
+  tlm,version-major:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: major version number of Trusted Foundations firmware
+
+  tlm,version-minor:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: minor version number of Trusted Foundations firmware
+
+required:
+  - compatible
+  - tlm,version-major
+  - tlm,version-minor
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+      trusted-foundations {
+        compatible = "tlm,trusted-foundations";
+        tlm,version-major = <2>;
+        tlm,version-minor = <8>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt
deleted file mode 100644
index 75195bee116f..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Freescale i.MX7ULP Power Management Components
-----------------------------------------------
-
-The Multi-System Mode Controller (MSMC) is responsible for sequencing
-the MCU into and out of all stop and run power modes. Specifically, it
-monitors events to trigger transitions between power modes while
-controlling the power, clocks, and memories of the MCU to achieve the
-power consumption and functionality of that mode.
-
-The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or
-Standby modes for either Cortex family. Run, Wait, and Stop are the
-common terms used for the primary operating modes of Kinetis
-microcontrollers.
-
-Required properties:
-- compatible:	Should be "fsl,imx7ulp-smc1".
-- reg:		Specifies base physical address and size of the register sets.
-
-Example:
-smc1: smc1@40410000 {
-	compatible = "fsl,imx7ulp-smc1";
-	reg = <0x40410000 0x1000>;
-};
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
new file mode 100644
index 000000000000..3b26040f8f18
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-pm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP Power Management Components
+
+maintainers:
+  - A.s. Dong <aisheng.dong@nxp.com>
+
+description: |
+  The Multi-System Mode Controller (MSMC) is responsible for sequencing
+  the MCU into and out of all stop and run power modes. Specifically, it
+  monitors events to trigger transitions between power modes while
+  controlling the power, clocks, and memories of the MCU to achieve the
+  power consumption and functionality of that mode.
+
+  The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or
+  Standby modes for either Cortex family. Run, Wait, and Stop are the
+  common terms used for the primary operating modes of Kinetis
+  microcontrollers.
+
+properties:
+  compatible:
+    const: fsl,imx7ulp-smc1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    smc1@40410000 {
+        compatible = "fsl,imx7ulp-smc1";
+        reg = <0x40410000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt
deleted file mode 100644
index 7d0c7f002401..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Freescale i.MX7ULP System Integration Module
-----------------------------------------------
-The system integration module (SIM) provides system control and chip configuration
-registers. In this module, chip revision information is located in JTAG ID register,
-and a set of registers have been made available in DGO domain for SW use, with the
-objective to maintain its value between system resets.
-
-Required properties:
-- compatible:	Should be "fsl,imx7ulp-sim".
-- reg:		Specifies base physical address and size of the register sets.
-
-Example:
-sim: sim@410a3000 {
-	compatible = "fsl,imx7ulp-sim", "syscon";
-	reg = <0x410a3000 0x1000>;
-};
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml
new file mode 100644
index 000000000000..526f508cb98d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-sim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP System Integration Module
+
+maintainers:
+  - Anson Huang <anson.huang@nxp.com>
+
+description: |
+  The system integration module (SIM) provides system control and chip configuration
+  registers. In this module, chip revision information is located in JTAG ID register,
+  and a set of registers have been made available in DGO domain for SW use, with the
+  objective to maintain its value between system resets.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx7ulp-sim
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sim@410a3000 {
+        compatible = "fsl,imx7ulp-sim", "syscon";
+        reg = <0x410a3000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
deleted file mode 100644
index b5cb374dc47d..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Freescale DCFG
-
-DCFG is the device configuration unit, that provides general purpose
-configuration and status for the device. Such as setting the secondary
-core start address and release the secondary core from holdoff and startup.
-
-Required properties:
-  - compatible: Should contain a chip-specific compatible string,
-	Chip-specific strings are of the form "fsl,<chip>-dcfg",
-	The following <chip>s are known to be supported:
-	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
-  - reg : should contain base address and length of DCFG memory-mapped registers
-
-Example:
-	dcfg: dcfg@1ee0000 {
-		compatible = "fsl,ls1021a-dcfg";
-		reg = <0x0 0x1ee0000 0x0 0x10000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
deleted file mode 100644
index 0ab67b0b216d..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Freescale SCFG
-
-SCFG is the supplemental configuration unit, that provides SoC specific
-configuration and status registers for the chip. Such as getting PEX port
-status.
-
-Required properties:
-  - compatible: Should contain a chip-specific compatible string,
-	Chip-specific strings are of the form "fsl,<chip>-scfg",
-	The following <chip>s are known to be supported:
-	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
-  - reg: should contain base address and length of SCFG memory-mapped registers
-
-Example:
-	scfg: scfg@1570000 {
-		compatible = "fsl,ls1021a-scfg";
-		reg = <0x0 0x1570000 0x0 0x10000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
deleted file mode 100644
index e07735a8c2c7..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ /dev/null
@@ -1,252 +0,0 @@
-NXP i.MX System Controller Firmware (SCFW)
---------------------------------------------------------------------
-
-The System Controller Firmware (SCFW) is a low-level system function
-which runs on a dedicated Cortex-M core to provide power, clock, and
-resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
-(QM, QP), and i.MX8QX (QXP, DX).
-
-The AP communicates with the SC using a multi-ported MU module found
-in the LSIO subsystem. The current definition of this MU module provides
-5 remote AP connections to the SC to support up to 5 execution environments
-(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
-with the LSIO DSC IP bus. The SC firmware will communicate with this MU
-using the MSI bus.
-
-System Controller Device Node:
-============================================================
-
-The scu node with the following properties shall be under the /firmware/ node.
-
-Required properties:
--------------------
-- compatible:	should be "fsl,imx-scu".
-- mbox-names:	should include "tx0", "tx1", "tx2", "tx3",
-			       "rx0", "rx1", "rx2", "rx3";
-		include "gip3" if want to support general MU interrupt.
-- mboxes:	List of phandle of 4 MU channels for tx, 4 MU channels for
-		rx, and 1 optional MU channel for general interrupt.
-		All MU channels must be in the same MU instance.
-		Cross instances are not allowed. The MU instance can only
-		be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need
-		to make sure use the one which is not conflict with other
-		execution environments. e.g. ATF.
-		Note:
-		Channel 0 must be "tx0" or "rx0".
-		Channel 1 must be "tx1" or "rx1".
-		Channel 2 must be "tx2" or "rx2".
-		Channel 3 must be "tx3" or "rx3".
-		General interrupt rx channel must be "gip3".
-		e.g.
-		mboxes = <&lsio_mu1 0 0
-			  &lsio_mu1 0 1
-			  &lsio_mu1 0 2
-			  &lsio_mu1 0 3
-			  &lsio_mu1 1 0
-			  &lsio_mu1 1 1
-			  &lsio_mu1 1 2
-			  &lsio_mu1 1 3
-			  &lsio_mu1 3 3>;
-		See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
-		for detailed mailbox binding.
-
-Note: Each mu which supports general interrupt should have an alias correctly
-numbered in "aliases" node.
-e.g.
-aliases {
-	mu1 = &lsio_mu1;
-};
-
-i.MX SCU Client Device Node:
-============================================================
-
-Client nodes are maintained as children of the relevant IMX-SCU device node.
-
-Power domain bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding for the SCU power domain providers uses the generic power
-domain binding[2].
-
-Required properties:
-- compatible:		Should be one of:
-			  "fsl,imx8qm-scu-pd",
-			  "fsl,imx8qxp-scu-pd"
-			followed by "fsl,scu-pd"
-
-- #power-domain-cells:	Must be 1. Contains the Resource ID used by
-			SCU commands.
-			See detailed Resource ID list from:
-			include/dt-bindings/firmware/imx/rsrc.h
-
-Clock bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding uses the common clock binding[1].
-
-Required properties:
-- compatible:		Should be one of:
-			  "fsl,imx8qm-clock"
-			  "fsl,imx8qxp-clock"
-			followed by "fsl,scu-clk"
-- #clock-cells:		Should be 1. Contains the Clock ID value.
-- clocks:		List of clock specifiers, must contain an entry for
-			each required entry in clock-names
-- clock-names:		Should include entries "xtal_32KHz", "xtal_24MHz"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-
-See the full list of clock IDs from:
-include/dt-bindings/clock/imx8qxp-clock.h
-
-Pinctrl bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding uses the i.MX common pinctrl binding[3].
-
-Required properties:
-- compatible:		Should be one of:
-			"fsl,imx8qm-iomuxc",
-			"fsl,imx8qxp-iomuxc".
-
-Required properties for Pinctrl sub nodes:
-- fsl,pins:		Each entry consists of 3 integers which represents
-			the mux and config setting for one pin. The first 2
-			integers <pin_id mux_mode> are specified using a
-			PIN_FUNC_ID macro, which can be found in
-			<dt-bindings/pinctrl/pads-imx8qm.h>,
-			<dt-bindings/pinctrl/pads-imx8qxp.h>.
-			The last integer CONFIG is the pad setting value like
-			pull-up on this pin.
-
-			Please refer to i.MX8QXP Reference Manual for detailed
-			CONFIG settings.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/power/power-domain.yaml
-[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
-
-RTC bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be "fsl,imx8qxp-sc-rtc";
-
-OCOTP bindings based on SCU Message Protocol
-------------------------------------------------------------
-Required properties:
-- compatible:		Should be one of:
-			"fsl,imx8qm-scu-ocotp",
-			"fsl,imx8qxp-scu-ocotp".
-- #address-cells:	Must be 1. Contains byte index
-- #size-cells:		Must be 1. Contains byte length
-
-Optional Child nodes:
-
-- Data cells of ocotp:
-  Detailed bindings are described in bindings/nvmem/nvmem.txt
-
-Watchdog bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be:
-              "fsl,imx8qxp-sc-wdt"
-              followed by "fsl,imx-sc-wdt";
-Optional properties:
-- timeout-sec: contains the watchdog timeout in seconds.
-
-SCU key bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be:
-              "fsl,imx8qxp-sc-key"
-              followed by "fsl,imx-sc-key";
-- linux,keycodes: See Documentation/devicetree/bindings/input/keys.txt
-
-Example (imx8qxp):
--------------
-aliases {
-	mu1 = &lsio_mu1;
-};
-
-lsio_mu1: mailbox@5d1c0000 {
-	...
-	#mbox-cells = <2>;
-};
-
-firmware {
-	scu {
-		compatible = "fsl,imx-scu";
-		mbox-names = "tx0", "tx1", "tx2", "tx3",
-			     "rx0", "rx1", "rx2", "rx3",
-			     "gip3";
-		mboxes = <&lsio_mu1 0 0
-			  &lsio_mu1 0 1
-			  &lsio_mu1 0 2
-			  &lsio_mu1 0 3
-			  &lsio_mu1 1 0
-			  &lsio_mu1 1 1
-			  &lsio_mu1 1 2
-			  &lsio_mu1 1 3
-			  &lsio_mu1 3 3>;
-
-		clk: clk {
-			compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
-			#clock-cells = <1>;
-		};
-
-		iomuxc {
-			compatible = "fsl,imx8qxp-iomuxc";
-
-			pinctrl_lpuart0: lpuart0grp {
-				fsl,pins = <
-					SC_P_UART0_RX_ADMA_UART0_RX	0x06000020
-					SC_P_UART0_TX_ADMA_UART0_TX	0x06000020
-				>;
-			};
-			...
-		};
-
-		ocotp: imx8qx-ocotp {
-			compatible = "fsl,imx8qxp-scu-ocotp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			fec_mac0: mac@2c4 {
-				reg = <0x2c4 8>;
-			};
-		};
-
-		pd: imx8qx-pd {
-			compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
-			#power-domain-cells = <1>;
-		};
-
-		rtc: rtc {
-			compatible = "fsl,imx8qxp-sc-rtc";
-		};
-
-		scu_key: scu-key {
-			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
-			linux,keycodes = <KEY_POWER>;
-		};
-
-		watchdog {
-			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
-			timeout-sec = <60>;
-		};
-	};
-};
-
-serial@5a060000 {
-	...
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart0>;
-	clocks = <&clk IMX8QXP_UART0_CLK>,
-		 <&clk IMX8QXP_UART0_IPG_CLK>;
-	clock-names = "per", "ipg";
-	power-domains = <&pd IMX_SC_R_UART_0>;
-};
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 0e17e1f6fb80..fbfc4f99c01e 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/fsl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX Platforms Device Tree Bindings
+title: Freescale i.MX Platforms
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
@@ -33,16 +33,57 @@ properties:
         items:
           - enum:
               - fsl,imx25-pdk
+              - karo,imx25-tx25
           - const: fsl,imx25
 
-      - description: i.MX27 Product Development Kit
+      - description: i.MX25 Eukrea CPUIMX25 Boards
+        items:
+          - enum:
+              - eukrea,mbimxsd25-baseboard   # Eukrea MBIMXSD25
+          - const: eukrea,cpuimx25
+          - const: fsl,imx25
+
+      - description: i.MX25 Eukrea MBIMXSD25 Boards
+        items:
+          - enum:
+              - eukrea,mbimxsd25-baseboard-cmo-qvga
+              - eukrea,mbimxsd25-baseboard-dvi-svga
+              - eukrea,mbimxsd25-baseboard-dvi-vga
+          - const: eukrea,mbimxsd25-baseboard
+          - const: eukrea,cpuimx25
+          - const: fsl,imx25
+
+      - description: i.MX27 based Boards
         items:
           - enum:
               - armadeus,imx27-apf27      # APF27 SoM
-              - armadeus,imx27-apf27dev   # APF27 SoM on APF27Dev board
               - fsl,imx27-pdk
           - const: fsl,imx27
 
+      - description: i.MX27 APF27 SoM Board
+        items:
+          - const: armadeus,imx27-apf27dev
+          - const: armadeus,imx27-apf27
+          - const: fsl,imx27
+
+      - description: i.MX27 Eukrea CPUIMX27 SoM Board
+        items:
+          - const: eukrea,mbimxsd27-baseboard
+          - const: eukrea,cpuimx27
+          - const: fsl,imx27
+
+      - description: i.MX27 Phytec pca100 Board
+        items:
+          - const: phytec,imx27-pca100-rdk
+          - const: phytec,imx27-pca100
+          - const: fsl,imx27
+
+      - description: i.MX27 Phytec pcm970 Board
+        items:
+          - const: phytec,imx27-pcm970
+          - const: phytec,imx27-pcm038
+          - const: fsl,imx27
+
       - description: i.MX28 based Boards
         items:
           - enum:
@@ -88,13 +129,33 @@ properties:
               - kobo,aura
           - const: fsl,imx50
 
-      - description: i.MX51 Babbage Board
+      - description: i.MX51 based Boards
         items:
           - enum:
-              - armadeus,imx51-apf51    # APF51 SoM
-              - armadeus,imx51-apf51dev # APF51 SoM on APF51Dev board
+              - armadeus,imx51-apf51      # Armadeus Systems APF51 module
               - fsl,imx51-babbage
               - technologic,imx51-ts4800
+              - zii,imx51-scu3-esb
+              - zii,imx51-scu2-mezz
+              - zii,imx51-rdu1
+          - const: fsl,imx51
+
+      - description: i.MX51 based Armadeus Systems APF51Dev Board
+        items:
+          - const: armadeus,imx51-apf51dev
+          - const: armadeus,imx51-apf51
+          - const: fsl,imx51
+
+      - description: i.MX51 based Digi ConnectCore CC(W)-MX51 JSK Board
+        items:
+          - const: digi,connectcore-ccxmx51-jsk
+          - const: digi,connectcore-ccxmx51-som
+          - const: fsl,imx51
+
+      - description: i.MX51 based Eukrea CPUIMX51 Board
+        items:
+          - const: eukrea,mbimxsd51
+          - const: eukrea,cpuimx51
           - const: fsl,imx51
 
       - description: i.MX53 based Boards
@@ -104,28 +165,119 @@ properties:
               - fsl,imx53-ard
               - fsl,imx53-evk
               - fsl,imx53-qsb
+              - fsl,imx53-qsrb                # Freescale i.MX53 Quick Start-R Board
               - fsl,imx53-smd
-              - menlo,m53menlo
+              - ge,imx53-cpuvo                # General Electric CS ONE
+              - inversepath,imx53-usbarmory   # Inverse Path USB armory
+              - karo,tx53                     # Ka-Ro electronics TX53 module
+              - kiebackpeter,imx53-ddc        # K+P imx53 DDC
+              - kiebackpeter,imx53-hsc        # K+P imx53 HSC
+              - menlo,m53menlo                # i.MX53 Menlo board
+              - voipac,imx53-dmm-668          # Voipac i.MX53 X53-DMM-668
+          - const: fsl,imx53
+
+      - description: i.MX53 based Aries/DENX M53EVK Board
+        items:
+          - const: aries,imx53-m53evk
+          - const: denx,imx53-m53evk
+          - const: fsl,imx53
+
+      - description: i.MX53 based TQ MBa53 Board
+        items:
+          - const: tq,mba53
+          - const: tq,tqma53
           - const: fsl,imx53
 
       - description: i.MX6Q based Boards
         items:
           - enum:
-              - armadeus,imx6q-apf6       # APF6 (Quad/Dual) SoM
-              - armadeus,imx6q-apf6dev    # APF6 (Quad/Dual) SoM on APF6Dev board
+              - auvidea,h100              # Auvidea H100
+              - bosch,imx6q-acc           # Bosch ACC i.MX6 Dual
+              - boundary,imx6q-nitrogen6_max
+              - boundary,imx6q-nitrogen6_som2
+              - boundary,imx6q-nitrogen6x
+              - compulab,cm-fx6           # CompuLab CM-FX6
+              - dmo,imx6q-edmqmx6         # Data Modul eDM-QMX6 Board
+              - ds,imx6q-sbc              # Da Sheng COM-9XX Modules
+              - embest,imx6q-marsboard    # Embest MarS Board i.MX6Dual
               - emtrion,emcon-mx6         # emCON-MX6D or emCON-MX6Q SoM
               - emtrion,emcon-mx6-avari   # emCON-MX6D or emCON-MX6Q SoM on Avari Base
+              - engicam,imx6-icore        # Engicam i.CoreM6 Starter Kit
+              - engicam,imx6-icore-rqs    # Engicam i.CoreM6 RQS Starter Kit
               - fsl,imx6q-arm2
               - fsl,imx6q-sabreauto
               - fsl,imx6q-sabrelite
               - fsl,imx6q-sabresd
+              - karo,imx6q-tx6q           # Ka-Ro electronics TX6Q Modules
+              - kiebackpeter,imx6q-tpc    # K+P i.MX6 Quad TPC Board
+              - kontron,imx6q-samx6i      # Kontron i.MX6 Dual/Quad SMARC Module
+              - kosagi,imx6q-novena       # Kosagi Novena Dual/Quad
+              - kvg,vicut1q               # Kverneland UT1Q board
+              - logicpd,imx6q-logicpd
+              - lwn,display5              # Liebherr Display5 i.MX6 Quad Board
+              - lwn,mccmon6               # Liebherr Monitor6 i.MX6 Quad Board
+              - nutsboard,imx6q-pistachio # NutsBoard i.MX6 Quad Pistachio
+              - microsys,sbc6x            # MicroSys sbc6x board
+              - poslab,imx6q-savageboard  # Poslab SavageBoard Quad
+              - prt,prti6q                # Protonic PRTI6Q board
+              - prt,prtwd2                # Protonic WD2 board
+              - rex,imx6q-rex-pro         # Rex Pro i.MX6 Quad Board
+              - skov,imx6q-skov-revc-lt2  # SKOV IMX6 CPU QuadCore lt2
+              - skov,imx6q-skov-revc-lt6  # SKOV IMX6 CPU QuadCore lt6
+              - skov,imx6q-skov-reve-mi1010ait-1cp1 # SKOV IMX6 CPU QuadCore mi1010ait-1cp1
+              - solidrun,cubox-i/q        # SolidRun Cubox-i Dual/Quad
+              - solidrun,hummingboard/q
+              - solidrun,hummingboard2/q
+              - solidrun,solidsense/q     # SolidRun SolidSense Dual/Quad
+              - tbs,imx6q-tbs2910         # TBS2910 Matrix ARM mini PC
+              - technexion,imx6q-pico-dwarf   # TechNexion i.MX6Q Pico-Dwarf
+              - technexion,imx6q-pico-hobbit  # TechNexion i.MX6Q Pico-Hobbit
+              - technexion,imx6q-pico-nymph   # TechNexion i.MX6Q Pico-Nymph
+              - technexion,imx6q-pico-pi      # TechNexion i.MX6Q Pico-Pi
               - technologic,imx6q-ts4900
               - technologic,imx6q-ts7970
-              - toradex,apalis_imx6q            # Apalis iMX6 Module
-              - toradex,apalis_imx6q-eval       # Apalis iMX6 Module on Apalis Evaluation Board
-              - toradex,apalis_imx6q-ixora      # Apalis iMX6 Module on Ixora
-              - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6 Module on Ixora V1.1
+              - toradex,apalis_imx6q      # Apalis iMX6 Modules
+              - udoo,imx6q-udoo           # Udoo i.MX6 Quad Board
+              - uniwest,imx6q-evi         # Uniwest Evi
               - variscite,dt6customboard
+              - wand,imx6q-wandboard      # Wandboard i.MX6 Quad Board
+              - ysoft,imx6q-yapp4-crux    # i.MX6 Quad Y Soft IOTA Crux board
+              - zealz,imx6q-gk802         # Zealz GK802
+              - zii,imx6q-zii-rdu2        # ZII RDU2 Board
+          - const: fsl,imx6q
+
+      - description: i.MX6Q Advantech DMS-BA16 Boards
+        items:
+          - enum:
+              - advantech,imx6q-dms-ba16  # Advantech DMS-BA16
+              - ge,imx6q-b450v3           # General Electric B450v3
+              - ge,imx6q-b650v3           # General Electric B650v3
+              - ge,imx6q-b850v3           # General Electric B850v3
+          - const: advantech,imx6q-ba16
+          - const: fsl,imx6q
+
+      - description: i.MX6Q Armadeus APF6 Boards
+        items:
+          - const: armadeus,imx6q-apf6dev
+          - const: armadeus,imx6q-apf6
+          - const: fsl,imx6q
+
+      - description: i.MX6Q CompuLab Utilite Pro Board
+        items:
+          - const: compulab,utilite-pro
+          - const: compulab,cm-fx6
+          - const: fsl,imx6q
+
+      - description: i.MX6Q DFI FS700-M60-6QD Board
+        items:
+          - const: dfi,fs700-m60-6qd
+          - const: dfi,fs700e-m60
+          - const: fsl,imx6q
+
+      - description: i.MX6Q DHCOM Premium Developer Kit Board
+        items:
+          - const: dh,imx6q-dhcom-pdk2
+          - const: dh,imx6q-dhcom-som
           - const: fsl,imx6q
 
       - description: i.MX6Q Gateworks Ventana Boards
@@ -149,32 +301,156 @@ properties:
           - const: gw,ventana
           - const: fsl,imx6q
 
+      - description: i.MX6Q PHYTEC phyBOARD-Mira
+        items:
+          - enum:
+              - phytec,imx6q-pbac06-emmc  # PHYTEC phyBOARD-Mira eMMC RDK
+              - phytec,imx6q-pbac06-nand  # PHYTEC phyBOARD-Mira NAND RDK
+          - const: phytec,imx6q-pbac06    # PHYTEC phyBOARD-Mira
+          - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
+          - const: fsl,imx6q
+
+      - description: i.MX6Q PHYTEC phyFLEX-i.MX6
+        items:
+          - const: phytec,imx6q-pbab01    # PHYTEC phyFLEX carrier board
+          - const: phytec,imx6q-pfla02    # PHYTEC phyFLEX-i.MX6 Quad
+          - const: fsl,imx6q
+
+      - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Modules
+        items:
+          - enum:
+              - toradex,apalis_imx6q-ixora      # Apalis iMX6Q/D Module on Ixora Carrier Board
+              - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board
+              - toradex,apalis_imx6q-ixora-v1.2 # Apalis iMX6Q/D Module on Ixora V1.2 Carrier Board
+              - toradex,apalis_imx6q-eval       # Apalis iMX6Q/D Module on Apalis Evaluation Board
+          - const: toradex,apalis_imx6q
+          - const: fsl,imx6q
+
+      - description: TQ-Systems TQMa6Q SoM (variant A) on MBa6x
+        items:
+          - const: tq,imx6q-mba6x-a
+          - const: tq,mba6a               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6q-tqma6q-a
+          - const: fsl,imx6q
+
+      - description: TQ-Systems TQMa6Q SoM (variant B) on MBa6x
+        items:
+          - const: tq,imx6q-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6q-tqma6q-b
+          - const: fsl,imx6q
+
       - description: i.MX6QP based Boards
         items:
           - enum:
+              - boundary,imx6qp-nitrogen6_max
+              - boundary,imx6qp-nitrogen6_som2
               - fsl,imx6qp-sabreauto      # i.MX6 Quad Plus SABRE Automotive Board
               - fsl,imx6qp-sabresd        # i.MX6 Quad Plus SABRE Smart Device Board
+              - karo,imx6qp-tx6qp         # Ka-Ro electronics TX6QP-8037 Module
+              - kvg,vicutp                # Kverneland UT1P board
+              - prt,prtwd3                # Protonic WD3 board
+              - wand,imx6qp-wandboard     # Wandboard i.MX6 QuadPlus Board
+              - ysoft,imx6qp-yapp4-crux-plus  # i.MX6 Quad Plus Y Soft IOTA Crux+ board
+              - zii,imx6qp-zii-rdu2       # ZII RDU2+ Board
+          - const: fsl,imx6qp
+
+      - description: i.MX6QP PHYTEC phyBOARD-Mira
+        items:
+          - const: phytec,imx6qp-pbac06-nand
+          - const: phytec,imx6qp-pbac06   # PHYTEC phyBOARD-Mira
+          - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
+          - const: fsl,imx6qp
+
+      - description: TQ-Systems TQMa6QP SoM on MBa6x
+        items:
+          - const: tq,imx6qp-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6qp-tqma6qp-b
           - const: fsl,imx6qp
 
       - description: i.MX6DL based Boards
         items:
           - enum:
-              - armadeus,imx6dl-apf6      # APF6 (Solo) SoM
-              - armadeus,imx6dl-apf6dev   # APF6 (Solo) SoM on APF6Dev board
+              - abb,aristainetos-imx6dl-4     # aristainetos i.MX6 Dual Lite Board 4
+              - abb,aristainetos-imx6dl-7     # aristainetos i.MX6 Dual Lite Board 7
+              - abb,aristainetos2-imx6dl-4    # aristainetos2 i.MX6 Dual Lite Board 4
+              - abb,aristainetos2-imx6dl-7    # aristainetos2 i.MX6 Dual Lite Board 7
+              - alt,alti6p                    # Altesco I6P Board
+              - boundary,imx6dl-nit6xlite     # Boundary Devices Nitrogen6 Lite
+              - boundary,imx6dl-nitrogen6x    # Boundary Devices Nitrogen6x
+              - bticino,imx6dl-mamoj      # BTicino i.MX6DL Mamoj
               - eckelmann,imx6dl-ci4x10
               - emtrion,emcon-mx6         # emCON-MX6S or emCON-MX6DL SoM
               - emtrion,emcon-mx6-avari   # emCON-MX6S or emCON-MX6DL SoM on Avari Base
+              - engicam,imx6-icore        # Engicam i.CoreM6 Starter Kit
+              - engicam,imx6-icore-rqs    # Engicam i.CoreM6 RQS Starter Kit
               - fsl,imx6dl-sabreauto      # i.MX6 DualLite/Solo SABRE Automotive Board
+              - fsl,imx6dl-sabrelite      # i.MX6 DualLite SABRE Lite Board
               - fsl,imx6dl-sabresd        # i.MX6 DualLite SABRE Smart Device Board
+              - karo,imx6dl-tx6dl         # Ka-Ro electronics TX6U Modules
+              - kontron,imx6dl-samx6i     # Kontron i.MX6 Solo SMARC Module
+              - kvg,victgo                # Kverneland TGO
+              - kvg,vicut1                # Kverneland UT1 board
+              - ply,plybas                # Plymovent BAS board
+              - ply,plym2m                # Plymovent M2M board
+              - poslab,imx6dl-savageboard # Poslab SavageBoard Dual
+              - prt,prtmvt                # Protonic MVT board
+              - prt,prtrvt                # Protonic RVT board
+              - prt,prtvt7                # Protonic VT7 board
+              - rex,imx6dl-rex-basic      # Rex Basic i.MX6 Dual Lite Board
+              - riot,imx6s-riotboard      # RIoTboard i.MX6S
+              - skov,imx6dl-skov-revc-lt2 # SKOV IMX6 CPU SoloCore lt2
+              - skov,imx6dl-skov-revc-lt6 # SKOV IMX6 CPU SoloCore lt6
+              - solidrun,cubox-i/dl            # SolidRun Cubox-i Solo/DualLite
+              - solidrun,hummingboard/dl
+              - solidrun,hummingboard2/dl      # SolidRun HummingBoard2 Solo/DualLite
+              - solidrun,solidsense/dl         # SolidRun SolidSense Solo/DualLite
+              - technexion,imx6dl-pico-dwarf   # TechNexion i.MX6DL Pico-Dwarf
+              - technexion,imx6dl-pico-hobbit  # TechNexion i.MX6DL Pico-Hobbit
+              - technexion,imx6dl-pico-nymph   # TechNexion i.MX6DL Pico-Nymph
+              - technexion,imx6dl-pico-pi      # TechNexion i.MX6DL Pico-Pi
               - technologic,imx6dl-ts4900
               - technologic,imx6dl-ts7970
-              - toradex,colibri_imx6dl          # Colibri iMX6 Module
-              - toradex,colibri_imx6dl-eval-v3  # Colibri iMX6 Module on Colibri Evaluation Board V3
+              - toradex,colibri_imx6dl      # Colibri iMX6 Modules
+              - udoo,imx6dl-udoo          # Udoo i.MX6 Dual-lite Board
+              - vdl,lanmcu                # Van der Laan LANMCU board
+              - wand,imx6dl-wandboard     # Wandboard i.MX6 Dual Lite Board
               - ysoft,imx6dl-yapp4-draco  # i.MX6 DualLite Y Soft IOTA Draco board
               - ysoft,imx6dl-yapp4-hydra  # i.MX6 DualLite Y Soft IOTA Hydra board
+              - ysoft,imx6dl-yapp4-orion  # i.MX6 DualLite Y Soft IOTA Orion board
               - ysoft,imx6dl-yapp4-ursa   # i.MX6 Solo Y Soft IOTA Ursa board
           - const: fsl,imx6dl
 
+      - description: i.MX6DL based Armadeus AFP6 Board
+        items:
+          - const: armadeus,imx6dl-apf6dev
+          - const: armadeus,imx6dl-apf6         # APF6 (Solo) SoM
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL based congatec QMX6 Boards
+        items:
+          - enum:
+              - ge,imx6dl-b105v2          # General Electric B105v2
+              - ge,imx6dl-b105pv2         # General Electric B105Pv2
+              - ge,imx6dl-b125v2          # General Electric B125v2
+              - ge,imx6dl-b125pv2         # General Electric B125Pv2
+              - ge,imx6dl-b155v2          # General Electric B155v2
+          - const: congatec,qmx6
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL based DFI FS700-M60-6DL Board
+        items:
+          - const: dfi,fs700-m60-6dl
+          - const: dfi,fs700e-m60
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL DHCOM PicoITX Board
+        items:
+          - const: dh,imx6dl-dhcom-picoitx
+          - const: dh,imx6dl-dhcom-som
+          - const: fsl,imx6dl
+
       - description: i.MX6DL Gateworks Ventana Boards
         items:
           - enum:
@@ -195,11 +471,59 @@ properties:
           - const: gw,ventana
           - const: fsl,imx6dl
 
+      - description: i.MX6DL PHYTEC phyBOARD-Mira
+        items:
+          - enum:
+              - phytec,imx6dl-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+              - phytec,imx6dl-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+          - const: phytec,imx6dl-pbac06   # PHYTEC phyBOARD-Mira
+          - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL PHYTEC phyFLEX-i.MX6
+        items:
+          - const: phytec,imx6dl-pbab01   # PHYTEC phyFLEX carrier board
+          - const: phytec,imx6dl-pfla02   # PHYTEC phyFLEX-i.MX6 Quad
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules
+        items:
+          - enum:
+              - toradex,colibri_imx6dl-aster        # Colibri iMX6DL/S Module on Aster Board
+              - toradex,colibri_imx6dl-eval-v3      # Colibri iMX6DL/S Module on Colibri Evaluation Board V3
+              - toradex,colibri_imx6dl-iris         # Colibri iMX6DL/S Module on Iris Board
+              - toradex,colibri_imx6dl-iris-v2      # Colibri iMX6DL/S Module on Iris Board V2
+          - const: toradex,colibri_imx6dl           # Colibri iMX6DL/S Module
+          - const: fsl,imx6dl
+
+      - description: i.MX6S DHCOM DRC02 Board
+        items:
+          - const: dh,imx6s-dhcom-drc02
+          - const: dh,imx6s-dhcom-som
+          - const: fsl,imx6dl
+
+      - description: TQ-Systems TQMa6DL SoM (variant A) on MBa6x
+        items:
+          - const: tq,imx6dl-mba6x-a
+          - const: tq,mba6a               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6dl-tqma6dl-a
+          - const: fsl,imx6dl
+
+      - description: TQ-Systems TQMa6DL SoM (variant B) on MBa6x
+        items:
+          - const: tq,imx6dl-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6dl-tqma6dl-b
+          - const: fsl,imx6dl
+
       - description: i.MX6SL based Boards
         items:
           - enum:
               - fsl,imx6sl-evk            # i.MX6 SoloLite EVK Board
+              - kobo,tolino-shine2hd
               - kobo,tolino-shine3
+              - kobo,tolino-vision5
+              - revotics,imx6sl-warp      # Revotics WaRP Board
           - const: fsl,imx6sl
 
       - description: i.MX6SLL based Boards
@@ -207,65 +531,191 @@ properties:
           - enum:
               - fsl,imx6sll-evk
               - kobo,clarahd
+              - kobo,librah2o
           - const: fsl,imx6sll
 
       - description: i.MX6SX based Boards
         items:
           - enum:
+              - boundary,imx6sx-nitrogen6sx
               - fsl,imx6sx-sabreauto      # i.MX6 SoloX Sabre Auto Board
               - fsl,imx6sx-sdb            # i.MX6 SoloX SDB Board
               - fsl,imx6sx-sdb-reva       # i.MX6 SoloX SDB Rev-A Board
+              - samtec,imx6sx-vining-2000 # Softing VIN|ING 2000 Board
+              - udoo,neobasic             # UDOO Neo Basic Board
+              - udoo,neoextended          # UDOO Neo Extended
+              - udoo,neofull              # UDOO Neo Full
           - const: fsl,imx6sx
 
       - description: i.MX6UL based Boards
         items:
           - enum:
-              - armadeus,imx6ul-opos6ul    # OPOS6UL (i.MX6UL) SoM
-              - armadeus,imx6ul-opos6uldev # OPOS6UL (i.MX6UL) SoM on OPOS6ULDev board
+              - engicam,imx6ul-geam       # Engicam GEAM6UL Starter Kit
+              - engicam,imx6ul-isiot      # Engicam Is.IoT MX6UL eMMC/NAND Starter kit
               - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
-              - kontron,imx6ul-n6310-som  # Kontron N6310 SOM
-              - kontron,imx6ul-n6311-som  # Kontron N6311 SOM
+              - karo,imx6ul-tx6ul         # Ka-Ro electronics TXUL-0010 Module
+              - kontron,sl-imx6ul         # Kontron SL i.MX6UL SoM
+              - prt,prti6g                # Protonic PRTI6G Board
+              - technexion,imx6ul-pico-dwarf   # TechNexion i.MX6UL Pico-Dwarf
+              - technexion,imx6ul-pico-hobbit  # TechNexion i.MX6UL Pico-Hobbit
+              - technexion,imx6ul-pico-pi      # TechNexion i.MX6UL Pico-Pi
           - const: fsl,imx6ul
 
-      - description: Kontron N6310 S Board
+      - description: i.MX6UL Armadeus Systems OPOS6UL SoM Board
         items:
-          - const: kontron,imx6ul-n6310-s
-          - const: kontron,imx6ul-n6310-som
+          - const: armadeus,imx6ul-opos6uldev   # OPOS6UL (i.MX6UL) SoM on OPOS6ULDev board
+          - const: armadeus,imx6ul-opos6ul      # OPOS6UL (i.MX6UL) SoM
           - const: fsl,imx6ul
 
-      - description: Kontron N6311 S Board
+      - description: i.MX6UL Digi International ConnectCore 6UL Boards
         items:
-          - const: kontron,imx6ul-n6311-s
-          - const: kontron,imx6ul-n6311-som
+          - enum:
+              - digi,ccimx6ulsbcexpress   # Digi International ConnectCore 6UL SBC Express
+              - digi,ccimx6ulsbcpro       # Digi International ConnectCore 6UL SBC Pro
+          - const: digi,ccimx6ulsom
           - const: fsl,imx6ul
 
-      - description: Kontron N6310 S 43 Board
+      - description: i.MX6UL Grinn liteBoard
         items:
-          - const: kontron,imx6ul-n6310-s-43
-          - const: kontron,imx6ul-n6310-s
-          - const: kontron,imx6ul-n6310-som
+          - const: grinn,imx6ul-liteboard
+          - const: grinn,imx6ul-litesom
+          - const: fsl,imx6ul
+
+      - description: i.MX6UL PHYTEC phyBOARD-Segin
+        items:
+          - enum:
+              - phytec,imx6ul-pbacd10-emmc
+              - phytec,imx6ul-pbacd10-nand
+          - const: phytec,imx6ul-pbacd10  # PHYTEC phyBOARD-Segin with i.MX6 UL
+          - const: phytec,imx6ul-pcl063   # PHYTEC phyCORE-i.MX 6UL
+          - const: fsl,imx6ul
+
+      - description: Kontron BL i.MX6UL (N631X S) Board
+        items:
+          - const: kontron,bl-imx6ul       # Kontron BL i.MX6UL Carrier Board
+          - const: kontron,sl-imx6ul       # Kontron SL i.MX6UL SoM
+          - const: fsl,imx6ul
+
+      - description: Kontron BL i.MX6UL 43 (N631X S 43) Board
+        items:
+          - const: kontron,bl-imx6ul-43    # Kontron BL i.MX6UL Carrier Board with 4.3" Display
+          - const: kontron,bl-imx6ul       # Kontron BL i.MX6UL Carrier Board
+          - const: kontron,sl-imx6ul       # Kontron SL i.MX6UL SoM
+          - const: fsl,imx6ul
+
+      - description: TQ-Systems TQMa6UL1 SoM on MBa6ULx board
+        items:
+          - enum:
+              - tq,imx6ul-tqma6ul1-mba6ulx
+          - const: tq,imx6ul-tqma6ul1      # MCIMX6G1
+          - const: fsl,imx6ul
+
+      - description: TQ-Systems TQMa6UL2 SoM on MBa6ULx board
+        items:
+          - enum:
+              - tq,imx6ul-tqma6ul2-mba6ulx
+          - const: tq,imx6ul-tqma6ul2      # MCIMX6G2
+          - const: fsl,imx6ul
+
+      - description: TQ-Systems TQMa6ULxL SoM on MBa6ULx[L] board
+        items:
+          - enum:
+              - tq,imx6ul-tqma6ul2l-mba6ulx # using LGA adapter
+              - tq,imx6ul-tqma6ul2l-mba6ulxl
+          - const: tq,imx6ul-tqma6ul2l      # MCIMX6G2, LGA SoM variant
           - const: fsl,imx6ul
 
       - description: i.MX6ULL based Boards
         items:
           - enum:
-              - armadeus,imx6ull-opos6ul    # OPOS6UL (i.MX6ULL) SoM
-              - armadeus,imx6ull-opos6uldev # OPOS6UL (i.MX6ULL) SoM on OPOS6ULDev board
               - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
-              - kontron,imx6ull-n6411-som # Kontron N6411 SOM
-              - toradex,colibri-imx6ull-eval            # Colibri iMX6ULL Module on Colibri Evaluation Board
-              - toradex,colibri-imx6ull-wifi-eval       # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board
+              - joz,jozacp                # JOZ Access Point
+              - kontron,sl-imx6ull        # Kontron SL i.MX6ULL SoM
+              - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
+              - toradex,colibri-imx6ull      # Colibri iMX6ULL Modules
+              - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
+              - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board
+        items:
+          - const: armadeus,imx6ull-opos6uldev  # OPOS6UL (i.MX6ULL) SoM on OPOS6ULDev board
+          - const: armadeus,imx6ull-opos6ul     # OPOS6UL (i.MX6ULL) SoM
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL PHYTEC phyBOARD-Segin
+        items:
+          - enum:
+              - phytec,imx6ull-pbacd10-emmc
+              - phytec,imx6ull-pbacd10-nand
+          - const: phytec,imx6ull-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 ULL
+          - const: phytec,imx6ull-pcl063  # PHYTEC phyCORE-i.MX 6ULL
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL PHYTEC phyGATE-Tauri
+        items:
+          - enum:
+              - phytec,imx6ull-phygate-tauri-emmc
+              - phytec,imx6ull-phygate-tauri-nand
+          - const: phytec,imx6ull-phygate-tauri # PHYTEC phyGATE-Tauri with i.MX6 ULL
+          - const: phytec,imx6ull-pcl063        # PHYTEC phyCORE-i.MX 6ULL
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules
+        items:
+          - enum:
+              - toradex,colibri-imx6ull-aster     # Aster Carrier Board
+              - toradex,colibri-imx6ull-eval      # Colibri Evaluation Board V3
+              - toradex,colibri-imx6ull-iris      # Iris Carrier Board
+              - toradex,colibri-imx6ull-iris-v2   # Iris V2 Carrier Board
+          - const: toradex,colibri-imx6ull        # Colibri iMX6ULL Module
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module
+        items:
+          - enum:
+              - toradex,colibri-imx6ull-emmc-aster     # Aster Carrier Board
+              - toradex,colibri-imx6ull-emmc-eval      # Colibri Evaluation B. V3
+              - toradex,colibri-imx6ull-emmc-iris      # Iris Carrier Board
+              - toradex,colibri-imx6ull-emmc-iris-v2   # Iris V2 Carrier Board
+          - const: toradex,colibri-imx6ull-emmc        # Colibri iMX6ULL 1GB (eMMC) Module
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules
+        items:
+          - enum:
+              - toradex,colibri-imx6ull-wifi-eval     # Colibri Eval. B. V3
+              - toradex,colibri-imx6ull-wifi-aster    # Aster Carrier Board
+              - toradex,colibri-imx6ull-wifi-iris     # Iris Carrier Board
+              - toradex,colibri-imx6ull-wifi-iris-v2  # Iris V2 Carrier Board
+          - const: toradex,colibri-imx6ull-wifi       # Colibri iMX6ULL Wi-Fi / BT Module
+          - const: fsl,imx6ull
+
+      - description: Kontron BL i.MX6ULL (N6411 S) Board
+        items:
+          - const: kontron,bl-imx6ull   # Kontron BL i.MX6ULL Carrier Board
+          - const: kontron,sl-imx6ull   # Kontron SL i.MX6ULL SoM
           - const: fsl,imx6ull
 
-      - description: Kontron N6411 S Board
+      - description: TQ Systems TQMa6ULLx SoM on MBa6ULx board
         items:
-          - const: kontron,imx6ull-n6411-s
-          - const: kontron,imx6ull-n6411-som
+          - enum:
+              - tq,imx6ull-tqma6ull2-mba6ulx
+          - const: tq,imx6ull-tqma6ull2      # MCIMX6Y2
+          - const: fsl,imx6ull
+
+      - description: TQ Systems TQMa6ULLxL SoM on MBa6ULx[L] board
+        items:
+          - enum:
+              - tq,imx6ull-tqma6ull2l-mba6ulx # using LGA adapter
+              - tq,imx6ull-tqma6ull2l-mba6ulxl
+          - const: tq,imx6ull-tqma6ull2l      # MCIMX6Y2, LGA SoM variant
           - const: fsl,imx6ull
 
       - description: i.MX6ULZ based Boards
         items:
           - enum:
+              - bsh,imx6ulz-bsh-smm-m2    # i.MX6 ULZ BSH SystemMaster
               - fsl,imx6ulz-14x14-evk     # i.MX6 ULZ 14x14 EVK Board
           - const: fsl,imx6ull # This seems odd. Should be last?
           - const: fsl,imx6ulz
@@ -273,26 +723,54 @@ properties:
       - description: i.MX7S based Boards
         items:
           - enum:
-              - toradex,colibri-imx7s           # Colibri iMX7 Solo Module
-              - toradex,colibri-imx7s-eval-v3   # Colibri iMX7 Solo Module on Colibri Evaluation Board V3
-              - tq,imx7s-mba7             # i.MX7S TQ MBa7 with TQMa7S SoM
+              - element14,imx7s-warp      # Element14 Warp i.MX7 Board
+              - toradex,colibri-imx7s     # Colibri iMX7S Module
+          - const: fsl,imx7s
+
+      - description: i.MX7S Boards with Toradex Colibri iMX7S Module
+        items:
+          - enum:
+              - toradex,colibri-imx7s-aster     # Module on Aster Carrier Board
+              - toradex,colibri-imx7s-eval-v3   # Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7s-iris      # Module on Iris Carrier Board
+              - toradex,colibri-imx7s-iris-v2   # Module on Iris Carrier Board V2
+          - const: toradex,colibri-imx7s
+          - const: fsl,imx7s
+
+      - description: TQ-Systems TQMa7S SoM on MBa7x board
+        items:
+          - const: tq,imx7s-mba7
+          - const: tq,imx7s-tqma7
           - const: fsl,imx7s
 
       - description: i.MX7D based Boards
         items:
           - enum:
+              - boundary,imx7d-nitrogen7
+              - compulab,cl-som-imx7      # CompuLab CL-SOM-iMX7
               - fsl,imx7d-sdb             # i.MX7 SabreSD Board
               - fsl,imx7d-sdb-reva        # i.MX7 SabreSD Rev-A Board
+              - kam,imx7d-flex-concentrator       # Kamstrup OMNIA Flex Concentrator
+              - kam,imx7d-flex-concentrator-mfg   # Kamstrup OMNIA Flex Concentrator in manufacturing mode
               - novtech,imx7d-meerkat96   # i.MX7 Meerkat96 Board
-              - toradex,colibri-imx7d                   # Colibri iMX7 Dual Module
-              - toradex,colibri-imx7d-emmc              # Colibri iMX7 Dual 1GB (eMMC) Module
-              - toradex,colibri-imx7d-emmc-eval-v3      # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3
-              - toradex,colibri-imx7d-eval-v3           # Colibri iMX7 Dual Module on Colibri Evaluation Board V3
-              - tq,imx7d-mba7             # i.MX7D TQ MBa7 with TQMa7D SoM
+              - remarkable,imx7d-remarkable2  # i.MX7D ReMarkable 2 E-Ink Tablet
+              - storopack,imx7d-smegw01       # Storopack i.MX7D SMEGW01
+              - technexion,imx7d-pico-dwarf   # TechNexion i.MX7D Pico-Dwarf
+              - technexion,imx7d-pico-hobbit  # TechNexion i.MX7D Pico-Hobbit
+              - technexion,imx7d-pico-nymph   # TechNexion i.MX7D Pico-Nymph
+              - technexion,imx7d-pico-pi      # TechNexion i.MX7D Pico-Pi
+              - toradex,colibri-imx7d         # Colibri iMX7D Module
+              - toradex,colibri-imx7d-emmc    # Colibri iMX7D 1GB (eMMC) Module
               - zii,imx7d-rmu2            # ZII RMU2 Board
               - zii,imx7d-rpu2            # ZII RPU2 Board
           - const: fsl,imx7d
 
+      - description: TQ-Systems TQMa7D SoM on MBa7x board
+        items:
+          - const: tq,imx7d-mba7
+          - const: tq,imx7d-tqma7
+          - const: fsl,imx7d
+
       - description:
           Compulab SBC-iMX7 is a single board computer based on the
           Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with
@@ -304,6 +782,26 @@ properties:
           - const: compulab,cl-som-imx7
           - const: fsl,imx7d
 
+      - description: i.MX7D Boards with Toradex Colibri i.MX7D Module
+        items:
+          - enum:
+              - toradex,colibri-imx7d-aster   # Aster Carrier Board
+              - toradex,colibri-imx7d-eval-v3 # Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-iris    # Iris Carrier Board
+              - toradex,colibri-imx7d-iris-v2 # Iris Carrier Board V2
+          - const: toradex,colibri-imx7d
+          - const: fsl,imx7d
+
+      - description: i.MX7D Boards with Toradex Colibri i.MX7D 1GB (eMMC) Module
+        items:
+          - enum:
+              - toradex,colibri-imx7d-emmc-aster    # Module on Aster Carrier Board
+              - toradex,colibri-imx7d-emmc-eval-v3  # Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-emmc-iris     # Module on Iris Carrier Board
+              - toradex,colibri-imx7d-emmc-iris-v2  # Module on Iris Carrier Board V2
+          - const: toradex,colibri-imx7d-emmc
+          - const: fsl,imx7d
+
       - description: i.MX7ULP based Boards
         items:
           - enum:
@@ -314,37 +812,261 @@ properties:
       - description: i.MX8MM based Boards
         items:
           - enum:
+              - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
+              - boundary,imx8mm-nitrogen8mm  # i.MX8MM Nitrogen Board
+              - dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC
+              - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
+              - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
+              - gateworks,imx8mm-gw7904
+              - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
+              - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit
+              - gw,imx8mm-gw73xx-0x       # i.MX8MM Gateworks Development Kit
+              - gw,imx8mm-gw7901          # i.MX8MM Gateworks Board
+              - gw,imx8mm-gw7902          # i.MX8MM Gateworks Board
+              - gw,imx8mm-gw7903          # i.MX8MM Gateworks Board
+              - kontron,imx8mm-sl         # i.MX8MM Kontron SL (N801X) SOM
+              - kontron,imx8mm-osm-s      # i.MX8MM Kontron OSM-S (N802X) SOM
+              - menlo,mx8menlo            # i.MX8MM Menlo board with Verdin SoM
+              - toradex,verdin-imx8mm     # Verdin iMX8M Mini Modules
+              - toradex,verdin-imx8mm-nonwifi  # Verdin iMX8M Mini Modules without Wi-Fi / BT
+              - toradex,verdin-imx8mm-wifi  # Verdin iMX8M Mini Wi-Fi / BT Modules
+              - variscite,var-som-mx8mm   # i.MX8MM Variscite VAR-SOM-MX8MM module
+              - prt,prt8mm                # i.MX8MM Protonic PRT8MM Board
+          - const: fsl,imx8mm
+
+      - description: Engicam i.Core MX8M Mini SoM based boards
+        items:
+          - enum:
+              - engicam,icore-mx8mm-ctouch2        # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0
+              - engicam,icore-mx8mm-edimm2.2       # i.MX8MM Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
+          - const: engicam,icore-mx8mm             # i.MX8MM Engicam i.Core MX8M Mini SoM
+          - const: fsl,imx8mm
+
+      - description: Kontron BL i.MX8MM (N801X S) Board
+        items:
+          - const: kontron,imx8mm-bl
+          - const: kontron,imx8mm-sl
+          - const: fsl,imx8mm
+
+      - description: Kontron BL i.MX8MM OSM-S (N802X S) Board
+        items:
+          - const: kontron,imx8mm-bl-osm-s
+          - const: kontron,imx8mm-osm-s
+          - const: fsl,imx8mm
+
+      - description: Toradex Boards with Verdin iMX8M Mini Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mm-nonwifi-dahlia # Verdin iMX8M Mini Module on Dahlia
+              - toradex,verdin-imx8mm-nonwifi-dev    # Verdin iMX8M Mini Module on Verdin Development Board
+          - const: toradex,verdin-imx8mm-nonwifi     # Verdin iMX8M Mini Module without Wi-Fi / BT
+          - const: toradex,verdin-imx8mm             # Verdin iMX8M Mini Module
+          - const: fsl,imx8mm
+
+      - description: Toradex Boards with Verdin iMX8M Mini Wi-Fi / BT Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mm-wifi-dahlia # Verdin iMX8M Mini Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-imx8mm-wifi-dev    # Verdin iMX8M Mini Wi-Fi / BT M. on Verdin Development B.
+          - const: toradex,verdin-imx8mm-wifi     # Verdin iMX8M Mini Wi-Fi / BT Module
+          - const: toradex,verdin-imx8mm          # Verdin iMX8M Mini Module
+          - const: fsl,imx8mm
+
+      - description: PHYTEC phyCORE-i.MX8MM SoM based boards
+        items:
+          - const: phytec,imx8mm-phyboard-polis-rdk # phyBOARD-Polis RDK
+          - const: phytec,imx8mm-phycore-som        # phyCORE-i.MX8MM SoM
+          - const: fsl,imx8mm
+
+      - description: Variscite VAR-SOM-MX8MM based boards
+        items:
+          - const: variscite,var-som-mx8mm-symphony
+          - const: variscite,var-som-mx8mm
+          - const: fsl,imx8mm
+
+      - description:
+          TQMa8MxML is a series of SOM featuring NXP i.MX8MM system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All variants (TQMa8M[Q,D,S][L]ML) use the same device tree, hence only
+          one compatible is needed.
+        items:
+          - enum:
+              - tq,imx8mm-tqma8mqml-mba8mx # TQ-Systems GmbH i.MX8MM TQMa8MQML SOM on MBa8Mx
+          - const: tq,imx8mm-tqma8mqml     # TQ-Systems GmbH i.MX8MM TQMa8MQML SOM
           - const: fsl,imx8mm
 
       - description: i.MX8MN based Boards
         items:
           - enum:
+              - beacon,imx8mn-beacon-kit  # i.MX8MN Beacon Development Kit
+              - bsh,imx8mn-bsh-smm-s2     # i.MX8MN BSH SystemMaster S2
+              - bsh,imx8mn-bsh-smm-s2pro  # i.MX8MN BSH SystemMaster S2 PRO
+              - fsl,imx8mn-ddr3l-evk      # i.MX8MN DDR3L EVK Board
               - fsl,imx8mn-ddr4-evk       # i.MX8MN DDR4 EVK Board
               - fsl,imx8mn-evk            # i.MX8MN LPDDR4 EVK Board
+              - gw,imx8mn-gw7902          # i.MX8MM Gateworks Board
           - const: fsl,imx8mn
 
+      - description: Variscite VAR-SOM-MX8MN based boards
+        items:
+          - const: variscite,var-som-mx8mn-symphony
+          - const: variscite,var-som-mx8mn
+          - const: fsl,imx8mn
+
+      - description:
+          TQMa8MxNL is a series of SOM featuring NXP i.MX8MN system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All variants (TQMa8M[Q,D,S][L]NL) use the same device tree, hence only
+          one compatible is needed.
+        items:
+          - enum:
+              - tq,imx8mn-tqma8mqnl-mba8mx # TQ-Systems GmbH i.MX8MN TQMa8MQNL SOM on MBa8Mx
+          - const: tq,imx8mn-tqma8mqnl     # TQ-Systems GmbH i.MX8MN TQMa8MQNL SOM
+          - const: fsl,imx8mn
+
+      - description: i.MX8MP based Boards
+        items:
+          - enum:
+              - dh,imx8mp-dhcom-som       # i.MX8MP DHCOM SoM
+              - dh,imx8mp-dhcom-pdk2      # i.MX8MP DHCOM SoM on PDK2 board
+              - fsl,imx8mp-evk            # i.MX8MP EVK Board
+              - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
+              - toradex,verdin-imx8mp     # Verdin iMX8M Plus Modules
+              - toradex,verdin-imx8mp-nonwifi  # Verdin iMX8M Plus Modules without Wi-Fi / BT
+              - toradex,verdin-imx8mp-wifi  # Verdin iMX8M Plus Wi-Fi / BT Modules
+          - const: fsl,imx8mp
+
+      - description: Avnet (MSC Branded) Boards with SM2S i.MX8M Plus Modules
+        items:
+          - const: avnet,sm2s-imx8mp-14N0600E-ep1 # SM2S-IMX8PLUS-14N0600E on SM2-MB-EP1 Carrier Board
+          - const: avnet,sm2s-imx8mp-14N0600E     # 14N0600E variant of SM2S-IMX8PLUS SoM
+          - const: avnet,sm2s-imx8mp              # SM2S-IMX8PLUS SoM
+          - const: fsl,imx8mp
+
+      - description: Engicam i.Core MX8M Plus SoM based boards
+        items:
+          - enum:
+              - engicam,icore-mx8mp-edimm2.2       # i.MX8MP Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit
+          - const: engicam,icore-mx8mp             # i.MX8MP Engicam i.Core MX8M Plus SoM
+          - const: fsl,imx8mp
+
+      - description: PHYTEC phyCORE-i.MX8MP SoM based boards
+        items:
+          - const: phytec,imx8mp-phyboard-pollux-rdk # phyBOARD-Pollux RDK
+          - const: phytec,imx8mp-phycore-som         # phyCORE-i.MX8MP SoM
+          - const: fsl,imx8mp
+
+      - description: Toradex Boards with Verdin iMX8M Plus Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia
+              - toradex,verdin-imx8mp-nonwifi-dev    # Verdin iMX8M Plus Module on Verdin Development Board
+          - const: toradex,verdin-imx8mp-nonwifi     # Verdin iMX8M Plus Module without Wi-Fi / BT
+          - const: toradex,verdin-imx8mp             # Verdin iMX8M Plus Module
+          - const: fsl,imx8mp
+
+      - description: Toradex Boards with Verdin iMX8M Plus Wi-Fi / BT Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-imx8mp-wifi-dev    # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B.
+          - const: toradex,verdin-imx8mp-wifi     # Verdin iMX8M Plus Wi-Fi / BT Module
+          - const: toradex,verdin-imx8mp          # Verdin iMX8M Plus Module
+          - const: fsl,imx8mp
+
+      - description:
+          TQMa8MPxL is a series of LGA SOM featuring NXP i.MX8MP system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All CPU variants use the same device tree hence only one compatible
+          is needed. MBa8MPxL mainboard can be used as starterkit or in a boxed
+          version as an industrial computing device.
+        items:
+          - enum:
+              - tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL
+          - const: tq,imx8mp-tqma8mpql       # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
+          - const: fsl,imx8mp
+
       - description: i.MX8MQ based Boards
         items:
           - enum:
               - boundary,imx8mq-nitrogen8m # i.MX8MQ NITROGEN Board
+              - boundary,imx8mq-nitrogen8m-som # i.MX8MQ NITROGEN SoM
               - einfochips,imx8mq-thor96  # i.MX8MQ Thor96 Board
               - fsl,imx8mq-evk            # i.MX8MQ EVK Board
               - google,imx8mq-phanbell    # Google Coral Edge TPU
+              - kontron,pitx-imx8m        # Kontron pITX-imx8m Board
+              - mntre,reform2             # MNT Reform2 Laptop
               - purism,librem5-devkit     # Purism Librem5 devkit
               - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
               - technexion,pico-pi-imx8m  # TechNexion PICO-PI-8M evk
           - const: fsl,imx8mq
 
+      - description: Purism Librem5 phones
+        items:
+          - enum:
+              - purism,librem5r2          # Purism Librem5 phone "Chestnut"
+              - purism,librem5r3          # Purism Librem5 phone "Dogwood"
+              - purism,librem5r4          # Purism Librem5 phone "Evergreen"
+          - const: purism,librem5
+          - const: fsl,imx8mq
+
+      - description:
+          TQMa8Mx is a series of SOM featuring NXP i.MX8MQ system-on-chip
+          variants. It is designed to be clicked on different carrier boards.
+        items:
+          - enum:
+              - tq,imx8mq-tqma8mq-mba8mx # TQ-Systems GmbH i.MX8MQ TQMa8Mx SOM on MBa8Mx
+          - const: tq,imx8mq-tqma8mq     # TQ-Systems GmbH i.MX8MQ TQMa8Mx SOM
+          - const: fsl,imx8mq
+
+      - description: Zodiac Inflight Innovations Ultra Boards
+        items:
+          - enum:
+              - zii,imx8mq-ultra-rmb3
+              - zii,imx8mq-ultra-zest
+          - const: zii,imx8mq-ultra
+          - const: fsl,imx8mq
+
+      - description: i.MX8QM based Boards
+        items:
+          - enum:
+              - fsl,imx8qm-mek           # i.MX8QM MEK Board
+          - const: fsl,imx8qm
+
       - description: i.MX8QXP based Boards
         items:
           - enum:
               - einfochips,imx8qxp-ai_ml  # i.MX8QXP AI_ML Board
               - fsl,imx8qxp-mek           # i.MX8QXP MEK Board
-              - toradex,colibri-imx8x         # Colibri iMX8X Module
+              - toradex,colibri-imx8x     # Colibri iMX8X Modules
+          - const: fsl,imx8qxp
+
+      - description: i.MX8DXL based Boards
+        items:
+          - enum:
+              - fsl,imx8dxl-evk           # i.MX8DXL EVK Board
+          - const: fsl,imx8dxl
+
+      - description: i.MX8QXP Boards with Toradex Coilbri iMX8X Modules
+        items:
+          - enum:
               - toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3
+          - const: toradex,colibri-imx8x
           - const: fsl,imx8qxp
 
+      - description: i.MX8ULP based Boards
+        items:
+          - enum:
+              - fsl,imx8ulp-evk           # i.MX8ULP EVK Board
+          - const: fsl,imx8ulp
+
+      - description: i.MX93 based Boards
+        items:
+          - enum:
+              - fsl,imx93-11x11-evk       # i.MX93 11x11 EVK Board
+          - const: fsl,imx93
+
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
@@ -360,10 +1082,27 @@ properties:
               - fsl,vf600
               - fsl,vf610
               - fsl,vf610m4
-              - toradex,vf500-colibri_vf50              # Colibri VF50 Module
-              - toradex,vf500-colibri_vf50-on-eval      # Colibri VF50 Module on Colibri Evaluation Board
-              - toradex,vf610-colibri_vf61              # Colibri VF61 Module
-              - toradex,vf610-colibri_vf61-on-eval      # Colibri VF61 Module on Colibri Evaluation Board
+
+      - description: Toradex Colibri VF50 Module on Colibri Evaluation Board
+        items:
+          - const: toradex,vf500-colibri_vf50-on-eval
+          - const: toradex,vf500-colibri_vf50
+          - const: fsl,vf500
+
+      - description: VF610 based Boards
+        items:
+          - enum:
+              - fsl,vf610-twr             # VF610 Tower Board
+              - lwn,bk4                   # Liebherr BK4 controller
+              - phytec,vf610-cosmic       # PHYTEC Cosmic/Cosmic+ Board
+              - toradex,vf610-colibri_vf61 # Colibri VF61 Modules
+          - const: fsl,vf610
+
+      - description: Toradex Colibri VF61 Module on Colibri Evaluation Board
+        items:
+          - const: toradex,vf610-colibri_vf61-on-eval
+          - const: toradex,vf610-colibri_vf61
+          - const: fsl,vf610
 
       - description: ZII's VF610 based Boards
         items:
@@ -384,17 +1123,68 @@ properties:
               - ebs-systart,oxalis
               - fsl,ls1012a-rdb
               - fsl,ls1012a-frdm
+              - fsl,ls1012a-frwy
               - fsl,ls1012a-qds
           - const: fsl,ls1012a
 
       - description: LS1021A based Boards
         items:
           - enum:
+              - fsl,ls1021a-iot
               - fsl,ls1021a-moxa-uc-8410a
               - fsl,ls1021a-qds
+              - fsl,ls1021a-tsn
               - fsl,ls1021a-twr
           - const: fsl,ls1021a
 
+      - description: LS1028A based Boards
+        items:
+          - enum:
+              - fsl,ls1028a-qds
+              - fsl,ls1028a-rdb
+          - const: fsl,ls1028a
+
+      - description: Kontron KBox A-230-LS
+        items:
+          - const: kontron,kbox-a-230-ls
+          - const: kontron,sl28-var4
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+      - description:
+          Kontron SMARC-sAL28 board on the SMARC Eval Carrier 2.0
+        items:
+          - enum:
+              - kontron,sl28-var1-ads2
+              - kontron,sl28-var2-ads2
+              - kontron,sl28-var3-ads2
+              - kontron,sl28-var4-ads2
+          - enum:
+              - kontron,sl28-var1
+              - kontron,sl28-var2
+              - kontron,sl28-var3
+              - kontron,sl28-var4
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+
+      - description:
+          Kontron SMARC-sAL28 board (on a generic/undefined carrier)
+        items:
+          - enum:
+              - kontron,sl28-var1
+              - kontron,sl28-var2
+              - kontron,sl28-var3
+              - kontron,sl28-var4
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+
+      - description:
+          Kontron SMARC-sAL28 board (base). This is used in the base device
+          tree which is compatible with the overlays provided by the
+          vendor.
+        items:
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+
       - description: LS1043A based Boards
         items:
           - enum:
@@ -435,14 +1225,40 @@ properties:
       - description: LX2160A based Boards
         items:
           - enum:
+              - fsl,lx2160a-bluebox3
+              - fsl,lx2160a-bluebox3-rev-a
               - fsl,lx2160a-qds
               - fsl,lx2160a-rdb
+              - fsl,lx2162a-qds
+          - const: fsl,lx2160a
+
+      - description: SolidRun LX2160A based Boards
+        items:
+          - enum:
+              - solidrun,clearfog-cx
+              - solidrun,honeycomb
+          - const: solidrun,lx2160a-cex7
           - const: fsl,lx2160a
 
+      - description: S32G2 based Boards
+        items:
+          - enum:
+              - nxp,s32g274a-evb
+              - nxp,s32g274a-rdb2
+          - const: nxp,s32g2
+
       - description: S32V234 based Boards
         items:
           - enum:
               - fsl,s32v234-evb           # S32V234-EVB2 Customer Evaluation Board
           - const: fsl,s32v234
 
+      - description: Traverse LS1088A based Boards
+        items:
+          - enum:
+              - traverse,ten64            # Ten64 Networking Appliance / Board
+          - const: fsl,ls1088a
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/fw-cfg.txt b/Documentation/devicetree/bindings/arm/fw-cfg.txt
deleted file mode 100644
index fd54e1db2156..000000000000
--- a/Documentation/devicetree/bindings/arm/fw-cfg.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* QEMU Firmware Configuration bindings for ARM
-
-QEMU's arm-softmmu and aarch64-softmmu emulation / virtualization targets
-provide the following Firmware Configuration interface on the "virt" machine
-type:
-
-- A write-only, 16-bit wide selector (or control) register,
-- a read-write, 64-bit wide data register.
-
-QEMU exposes the control and data register to ARM guests as memory mapped
-registers; their location is communicated to the guest's UEFI firmware in the
-DTB that QEMU places at the bottom of the guest's DRAM.
-
-The authoritative guest-side hardware interface documentation to the fw_cfg
-device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree.
-
-
-Required properties:
-
-- compatible: "qemu,fw-cfg-mmio".
-
-- reg: the MMIO region used by the device.
-  * Bytes 0x0 to 0x7 cover the data register.
-  * Bytes 0x8 to 0x9 cover the selector register.
-  * Further registers may be appended to the region in case of future interface
-    revisions / feature bits.
-
-Example:
-
-/ {
-	#size-cells = <0x2>;
-	#address-cells = <0x2>;
-
-	fw-cfg@9020000 {
-		compatible = "qemu,fw-cfg-mmio";
-		reg = <0x0 0x9020000 0x0 0xa>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/arm/gemini.txt b/Documentation/devicetree/bindings/arm/gemini.txt
deleted file mode 100644
index 55bf7ce96c44..000000000000
--- a/Documentation/devicetree/bindings/arm/gemini.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-Cortina systems Gemini platforms
-
-The Gemini SoC is the project name for an ARMv4 FA525-based SoC originally
-produced by Storlink Semiconductor around 2005. The company was renamed
-later renamed Storm Semiconductor. The chip product name is Storlink SL3516.
-It was derived from earlier products from Storm named SL3316 (Centroid) and
-SL3512 (Bulverde).
-
-Storm Semiconductor was acquired by Cortina Systems in 2008 and the SoC was
-produced and used for NAS and similar usecases. In 2014 Cortina Systems was
-in turn acquired by Inphi, who seem to have discontinued this product family.
-
-Many of the IP blocks used in the SoC comes from Faraday Technology.
-
-Required properties (in root node):
-	compatible = "cortina,gemini";
-
-Required nodes:
-
-- soc: the SoC should be represented by a simple bus encompassing all the
-  onchip devices, this is referred to as the soc bus node.
-
-- syscon: the soc bus node must have a system controller node pointing to the
-  global control registers, with the compatible string
-  "cortina,gemini-syscon", "syscon";
-
-  Required properties on the syscon:
-  - reg: syscon register location and size.
-  - #clock-cells: should be set to <1> - the system controller is also a
-                  clock provider.
-  - #reset-cells: should be set to <1> - the system controller is also a
-                  reset line provider.
-
-  The clock sources have shorthand defines in the include file:
-  <dt-bindings/clock/cortina,gemini-clock.h>
-
-  The reset lines have shorthand defines in the include file:
-  <dt-bindings/reset/cortina,gemini-reset.h>
-
-- timer: the soc bus node must have a timer node pointing to the SoC timer
-  block, with the compatible string "cortina,gemini-timer"
-  See: clocksource/cortina,gemini-timer.txt
-
-- interrupt-controller: the sob bus node must have an interrupt controller
-  node pointing to the SoC interrupt controller block, with the compatible
-  string "cortina,gemini-interrupt-controller"
-  See interrupt-controller/cortina,gemini-interrupt-controller.txt
-
-Example:
-
-/ {
-	model = "Foo Gemini Machine";
-	compatible = "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-		interrupt-parent = <&intcon>;
-
-		syscon: syscon@40000000 {
-			compatible = "cortina,gemini-syscon", "syscon";
-			reg = <0x40000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		uart0: serial@42000000 {
-			compatible = "ns16550a";
-			reg = <0x42000000 0x100>;
-			resets = <&syscon GEMINI_RESET_UART>;
-			clocks = <&syscon GEMINI_CLK_UART>;
-			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-		};
-
-		timer@43000000 {
-			compatible = "cortina,gemini-timer";
-			reg = <0x43000000 0x1000>;
-			interrupt-parent = <&intcon>;
-			interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
-				     <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
-				     <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
-			resets = <&syscon GEMINI_RESET_TIMER>;
-			/* APB clock or RTC clock */
-			clocks = <&syscon GEMINI_CLK_APB>,
-				 <&syscon GEMINI_CLK_RTC>;
-			clock-names = "PCLK", "EXTCLK";
-			syscon = <&syscon>;
-		};
-
-		intcon: interrupt-controller@48000000 {
-			compatible = "cortina,gemini-interrupt-controller";
-			reg = <0x48000000 0x1000>;
-			resets = <&syscon GEMINI_RESET_INTCON0>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/arm/gemini.yaml b/Documentation/devicetree/bindings/arm/gemini.yaml
new file mode 100644
index 000000000000..f6a0b675830f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gemini.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/gemini.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortina systems Gemini platforms
+
+description: |
+  The Gemini SoC is the project name for an ARMv4 FA525-based SoC originally
+  produced by Storlink Semiconductor around 2005. The company was renamed
+  later renamed Storm Semiconductor. The chip product name is Storlink SL3516.
+  It was derived from earlier products from Storm named SL3316 (Centroid) and
+  SL3512 (Bulverde).
+
+  Storm Semiconductor was acquired by Cortina Systems in 2008 and the SoC was
+  produced and used for NAS and similar usecases. In 2014 Cortina Systems was
+  in turn acquired by Inphi, who seem to have discontinued this product family.
+
+  Many of the IP blocks used in the SoC comes from Faraday Technology.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Storlink Semiconductor Gemini324 EV-Board also known
+          as Storm Semiconductor SL93512R_BRD
+        items:
+          - const: storlink,gemini324
+          - const: storm,sl93512r
+          - const: cortina,gemini
+
+      - description: D-Link DIR-685 Xtreme N Storage Router
+        items:
+          - const: dlink,dir-685
+          - const: cortina,gemini
+
+      - description: D-Link DNS-313 1-Bay Network Storage Enclosure
+        items:
+          - const: dlink,dns-313
+          - const: cortina,gemini
+
+      - description: Edimax NS-2502
+        items:
+          - const: edimax,ns-2502
+          - const: cortina,gemini
+
+      - description: ITian Square One SQ201
+        items:
+          - const: itian,sq201
+          - const: cortina,gemini
+
+      - description: Raidsonic NAS IB-4220-B
+        items:
+          - const: raidsonic,ib-4220-b
+          - const: cortina,gemini
+
+      - description: SSI 1328
+        items:
+          - const: ssi,1328
+          - const: cortina,gemini
+
+      - description: Teltonika RUT1xx Mobile Router
+        items:
+          - const: teltonika,rut1xx
+          - const: cortina,gemini
+
+      - description: Wiligear Wiliboard WBD-111
+        items:
+          - const: wiligear,wiliboard-wbd111
+          - const: cortina,gemini
+
+      - description: Wiligear Wiliboard WBD-222
+        items:
+          - const: wiligear,wiliboard-wbd222
+          - const: cortina,gemini
+
+      - description: Wiligear Wiliboard WBD-111 - old incorrect binding
+        items:
+          - const: wiliboard,wbd111
+          - const: cortina,gemini
+        deprecated: true
+
+      - description: Wiligear Wiliboard WBD-222 - old incorrect binding
+        items:
+          - const: wiliboard,wbd222
+          - const: cortina,gemini
+        deprecated: true
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml
new file mode 100644
index 000000000000..528dad4cde3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/cpuctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon CPU controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  The clock registers and power registers of secondary cores are defined
+  in CPU controller, especially in HIX5HD2 SoC.
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,cpuctrl
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    cpuctrl@a22000 {
+        compatible = "hisilicon,cpuctrl";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x00a22000 0x2000>;
+        ranges = <0 0x00a22000 0x2000>;
+
+        clock: clock@0 {
+            compatible = "hisilicon,hix5hd2-clock";
+            reg = <0 0x2000>;
+            #clock-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml
new file mode 100644
index 000000000000..cba1937aad9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/hi3798cv200-perictrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Hi3798CV200 Peripheral Controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  The Hi3798CV200 Peripheral Controller controls peripherals, queries
+  their status, and configures some functions of peripherals.
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,hi3798cv200-perictrl
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    peripheral-controller@8a20000 {
+        compatible = "hisilicon,hi3798cv200-perictrl", "syscon", "simple-mfd";
+        reg = <0x8a20000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x8a20000 0x1000>;
+
+        phy@850 {
+            compatible = "hisilicon,hi3798cv200-combphy";
+            reg = <0x850 0x8>;
+            #phy-cells = <1>;
+            clocks = <&crg 42>;
+            resets = <&crg 0x188 4>;
+            assigned-clocks = <&crg 42>;
+            assigned-clock-rates = <100000000>;
+            hisilicon,fixed-mode = <4>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml
new file mode 100644
index 000000000000..6ea6d7ee7a14
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/hi6220-domain-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Hi6220 domain controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  Hisilicon designs some special domain controllers for mobile platform,
+  such as: the power Always On domain controller, the Media domain
+  controller(e.g. codec, G3D ...) and the Power Management domain
+  controller.
+
+  The compatible names of each domain controller are as follows:
+  Power Always ON domain controller  --> hisilicon,hi6220-aoctrl
+  Media domain controller            --> hisilicon,hi6220-mediactrl
+  Power Management domain controller --> hisilicon,hi6220-pmctrl
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - hisilicon,hi6220-aoctrl
+          - hisilicon,hi6220-mediactrl
+          - hisilicon,hi6220-pmctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ao_ctrl@f7800000 {
+        compatible = "hisilicon,hi6220-aoctrl", "syscon";
+        reg = <0xf7800000 0x2000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+    media_ctrl@f4410000 {
+        compatible = "hisilicon,hi6220-mediactrl", "syscon";
+        reg = <0xf4410000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+    pm_ctrl@f7032000 {
+        compatible = "hisilicon,hi6220-pmctrl", "syscon";
+        reg = <0xf7032000 0x1000>;
+        #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
new file mode 100644
index 000000000000..483caf0ce25b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/hip04-bootwrapper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bootwrapper boot method
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: Bootwrapper boot method (software protocol on SMP)
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,hip04-bootwrapper
+
+  boot-method:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Address and size of boot method.
+      [0]: bootwrapper physical address
+      [1]: bootwrapper size
+      [2]: relocation physical address
+      [3]: relocation size
+    minItems: 2
+    maxItems: 4
+
+required:
+  - compatible
+  - boot-method
+
+additionalProperties: false
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml
new file mode 100644
index 000000000000..60c516a04ad5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/hip04-fabric.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Fabric controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: Hisilicon Fabric controller
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,hip04-fabric
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml
new file mode 100644
index 000000000000..6d5065872809
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/pctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral misc control register
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: Peripheral misc control register
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,pctrl
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pctrl@fca09000 {
+        compatible = "hisilicon,pctrl";
+        reg = <0xfca09000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
new file mode 100644
index 000000000000..5a53d433b6f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon system controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  The Hisilicon system controller is used on many Hisilicon boards, it can be
+  used to assist the slave core startup, reboot the system, etc.
+
+  There are some variants of the Hisilicon system controller, such as HiP01,
+  Hi3519, Hi6220 system controller, each of them is mostly compatible with the
+  Hisilicon system controller, but some same registers located at different
+  offset. In addition, the HiP01 system controller has some specific control
+  registers for HIP01 SoC family, such as slave core boot.
+
+  The compatible names of each system controller are as follows:
+  Hisilicon system controller   --> hisilicon,sysctrl
+  HiP01     system controller   --> hisilicon,hip01-sysctrl
+  Hi6220    system controller   --> hisilicon,hi6220-sysctrl
+  Hi3519    system controller   --> hisilicon,hi3519-sysctrl
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: hisilicon,hi6220-sysctrl
+    then:
+      required:
+        - '#clock-cells'
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - hisilicon,sysctrl
+              - hisilicon,hi6220-sysctrl
+              - hisilicon,hi3519-sysctrl
+          - const: syscon
+      - items:
+          - const: hisilicon,hip01-sysctrl
+          - const: hisilicon,sysctrl
+
+  reg:
+    maxItems: 1
+
+  smp-offset:
+    description: |
+      offset in sysctrl for notifying slave cpu booting
+      cpu 1, reg;
+      cpu 2, reg + 0x4;
+      cpu 3, reg + 0x8;
+      If reg value is not zero, cpun exit wfi and go
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  resume-offset:
+    description: offset in sysctrl for notifying cpu0 when resume
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  reboot-offset:
+    description: offset in sysctrl for system reboot
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    /* Hisilicon system controller */
+    system-controller@802000 {
+        compatible = "hisilicon,sysctrl", "syscon";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x802000 0x1000>;
+        reg = <0x802000 0x1000>;
+
+        smp-offset = <0x31c>;
+        resume-offset = <0x308>;
+        reboot-offset = <0x4>;
+
+        clock: clock@0 {
+            compatible = "hisilicon,hi3620-clock";
+            reg = <0 0x10000>;
+            #clock-cells = <1>;
+        };
+    };
+
+    /* HiP01 system controller */
+    system-controller@10000000 {
+        compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+        reg = <0x10000000 0x1000>;
+        reboot-offset = <0x4>;
+    };
+
+    /* Hi6220 system controller */
+    system-controller@f7030000 {
+        compatible = "hisilicon,hi6220-sysctrl", "syscon";
+        reg = <0xf7030000 0x2000>;
+        #clock-cells = <1>;
+    };
+
+    /* Hi3519 system controller */
+    system-controller@12010000 {
+        compatible = "hisilicon,hi3519-sysctrl", "syscon";
+        reg = <0x12010000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt
deleted file mode 100644
index 8defacc44dd5..000000000000
--- a/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* Hisilicon Hi3519 System Controller Block
-
-This bindings use the following binding:
-Documentation/devicetree/bindings/mfd/syscon.yaml
-
-Required properties:
-- compatible: "hisilicon,hi3519-sysctrl".
-- reg: the register region of this block
-
-Examples:
-sysctrl: system-controller@12010000 {
-	compatible = "hisilicon,hi3519-sysctrl", "syscon";
-	reg = <0x12010000 0x1000>;
-};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
deleted file mode 100644
index 10bd35f9207f..000000000000
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Hisilicon Hip06 Low Pin Count device
-  Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which
-  provides I/O access to some legacy ISA devices.
-  Hip06 is based on arm64 architecture where there is no I/O space. So, the
-  I/O ports here are not CPU addresses, and there is no 'ranges' property in
-  LPC device node.
-
-Required properties:
-- compatible:  value should be as follows:
-	(a) "hisilicon,hip06-lpc"
-	(b) "hisilicon,hip07-lpc"
-- #address-cells: must be 2 which stick to the ISA/EISA binding doc.
-- #size-cells: must be 1 which stick to the ISA/EISA binding doc.
-- reg: base memory range where the LPC register set is mapped.
-
-Note:
-  The node name before '@' must be "isa" to represent the binding stick to the
-  ISA/EISA binding specification.
-
-Example:
-
-isa@a01b0000 {
-	compatible = "hisilicon,hip06-lpc";
-	#address-cells = <2>;
-	#size-cells = <1>;
-	reg = <0x0 0xa01b0000 0x0 0x1000>;
-
-	ipmi0: bt@e4 {
-		compatible = "ipmi-bt";
-		device_type = "ipmi";
-		reg = <0x01 0xe4 0x04>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
deleted file mode 100644
index a97f643e7d1c..000000000000
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ /dev/null
@@ -1,319 +0,0 @@
-Hisilicon Platforms Device Tree Bindings
-----------------------------------------------------
-Hi3660 SoC
-Required root node properties:
-	- compatible = "hisilicon,hi3660";
-
-HiKey960 Board
-Required root node properties:
-	- compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
-
-Hi3670 SoC
-Required root node properties:
-	- compatible = "hisilicon,hi3670";
-
-HiKey970 Board
-Required root node properties:
-	- compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
-
-Hi3798cv200 SoC
-Required root node properties:
-	- compatible = "hisilicon,hi3798cv200";
-
-Hi3798cv200 Poplar Board
-Required root node properties:
-	- compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
-
-Hi4511 Board
-Required root node properties:
-	- compatible = "hisilicon,hi3620-hi4511";
-
-Hi6220 SoC
-Required root node properties:
-	- compatible = "hisilicon,hi6220";
-
-HiKey Board
-Required root node properties:
-	- compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
-
-HiP01 ca9x2 Board
-Required root node properties:
-	- compatible = "hisilicon,hip01-ca9x2";
-
-HiP04 D01 Board
-Required root node properties:
-	- compatible = "hisilicon,hip04-d01";
-
-HiP05 D02 Board
-Required root node properties:
-	- compatible = "hisilicon,hip05-d02";
-
-HiP06 D03 Board
-Required root node properties:
-	- compatible = "hisilicon,hip06-d03";
-
-HiP07 D05 Board
-Required root node properties:
-	- compatible = "hisilicon,hip07-d05";
-
-Hisilicon system controller
-
-Required properties:
-- compatible : "hisilicon,sysctrl"
-- reg : Register address and size
-
-Optional properties:
-- smp-offset : offset in sysctrl for notifying slave cpu booting
-		cpu 1, reg;
-		cpu 2, reg + 0x4;
-		cpu 3, reg + 0x8;
-		If reg value is not zero, cpun exit wfi and go
-- resume-offset : offset in sysctrl for notifying cpu0 when resume
-- reboot-offset : offset in sysctrl for system reboot
-
-Example:
-
-	/* for Hi3620 */
-	sysctrl: system-controller@fc802000 {
-		compatible = "hisilicon,sysctrl";
-		reg = <0xfc802000 0x1000>;
-		smp-offset = <0x31c>;
-		resume-offset = <0x308>;
-		reboot-offset = <0x4>;
-	};
-
------------------------------------------------------------------------
-Hisilicon Hi3798CV200 Peripheral Controller
-
-The Hi3798CV200 Peripheral Controller controls peripherals, queries
-their status, and configures some functions of peripherals.
-
-Required properties:
-- compatible: Should contain "hisilicon,hi3798cv200-perictrl", "syscon"
-  and "simple-mfd".
-- reg: Register address and size of Peripheral Controller.
-- #address-cells: Should be 1.
-- #size-cells: Should be 1.
-
-Examples:
-
-	perictrl: peripheral-controller@8a20000 {
-		compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
-			     "simple-mfd";
-		reg = <0x8a20000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
------------------------------------------------------------------------
-Hisilicon Hi6220 system controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-sysctrl"
-- reg : Register address and size
-- #clock-cells: should be set to 1, many clock registers are defined
-  under this controller and this property must be present.
-
-Hisilicon designs this controller as one of the system controllers,
-its main functions are the same as Hisilicon system controller, but
-the register offset of some core modules are different.
-
-Example:
-	/*for Hi6220*/
-	sys_ctrl: sys_ctrl@f7030000 {
-		compatible = "hisilicon,hi6220-sysctrl", "syscon";
-		reg = <0x0 0xf7030000 0x0 0x2000>;
-		#clock-cells = <1>;
-	};
-
-
-Hisilicon Hi6220 Power Always ON domain controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-aoctrl"
-- reg : Register address and size
-- #clock-cells: should be set to 1, many clock registers are defined
-  under this controller and this property must be present.
-
-Hisilicon designs this system controller to control the power always
-on domain for mobile platform.
-
-Example:
-	/*for Hi6220*/
-	ao_ctrl: ao_ctrl@f7800000 {
-		compatible = "hisilicon,hi6220-aoctrl", "syscon";
-		reg = <0x0 0xf7800000 0x0 0x2000>;
-		#clock-cells = <1>;
-	};
-
-
-Hisilicon Hi6220 Media domain controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-mediactrl"
-- reg : Register address and size
-- #clock-cells: should be set to 1, many clock registers are defined
-  under this controller and this property must be present.
-
-Hisilicon designs this system controller to control the multimedia
-domain(e.g. codec, G3D ...) for mobile platform.
-
-Example:
-	/*for Hi6220*/
-	media_ctrl: media_ctrl@f4410000 {
-		compatible = "hisilicon,hi6220-mediactrl", "syscon";
-		reg = <0x0 0xf4410000 0x0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-
-Hisilicon Hi6220 Power Management domain controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-pmctrl"
-- reg : Register address and size
-- #clock-cells: should be set to 1, some clock registers are define
-  under this controller and this property must be present.
-
-Hisilicon designs this system controller to control the power management
-domain for mobile platform.
-
-Example:
-	/*for Hi6220*/
-	pm_ctrl: pm_ctrl@f7032000 {
-		compatible = "hisilicon,hi6220-pmctrl", "syscon";
-		reg = <0x0 0xf7032000 0x0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-
-Hisilicon Hi6220 SRAM controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-sramctrl", "syscon"
-- reg : Register address and size
-
-Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several
-SRAM banks for power management, modem, security, etc. Further, use "syscon"
-managing the common sram which can be shared by multiple modules.
-
-Example:
-	/*for Hi6220*/
-	sram: sram@fff80000 {
-		compatible = "hisilicon,hi6220-sramctrl", "syscon";
-		reg = <0x0 0xfff80000 0x0 0x12000>;
-	};
-
------------------------------------------------------------------------
-Hisilicon HiP01 system controller
-
-Required properties:
-- compatible : "hisilicon,hip01-sysctrl"
-- reg : Register address and size
-
-The HiP01 system controller is mostly compatible with hisilicon
-system controller,but it has some specific control registers for
-HIP01 SoC family, such as slave core boot, and also some same
-registers located at different offset.
-
-Example:
-
-	/* for hip01-ca9x2 */
-	sysctrl: system-controller@10000000 {
-		compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
-		reg = <0x10000000 0x1000>;
-		reboot-offset = <0x4>;
-	};
-
------------------------------------------------------------------------
-Hisilicon HiP05/HiP06 PCIe-SAS sub system controller
-
-Required properties:
-- compatible : "hisilicon,pcie-sas-subctrl", "syscon";
-- reg : Register address and size
-
-The PCIe-SAS sub system controller is shared by PCIe and SAS controllers in
-HiP05 or HiP06 Soc to implement some basic configurations.
-
-Example:
-	/* for HiP05 PCIe-SAS sub system */
-	pcie_sas: system_controller@b0000000 {
-		compatible = "hisilicon,pcie-sas-subctrl", "syscon";
-		reg = <0xb0000000 0x10000>;
-	};
-
-Hisilicon HiP05/HiP06 PERI sub system controller
-
-Required properties:
-- compatible : "hisilicon,peri-subctrl", "syscon";
-- reg : Register address and size
-
-The PERI sub system controller is shared by peripheral controllers in
-HiP05 or HiP06 Soc to implement some basic configurations. The peripheral
-controllers include mdio, ddr, iic, uart, timer and so on.
-
-Example:
-	/* for HiP05 sub peri system */
-	peri_c_subctrl: syscon@80000000 {
-		compatible = "hisilicon,peri-subctrl", "syscon";
-		reg = <0x0 0x80000000 0x0 0x10000>;
-	};
-
-Hisilicon HiP05/HiP06 DSA sub system controller
-
-Required properties:
-- compatible : "hisilicon,dsa-subctrl", "syscon";
-- reg : Register address and size
-
-The DSA sub system controller is shared by peripheral controllers in
-HiP05 or HiP06 Soc to implement some basic configurations.
-
-Example:
-	/* for HiP05 dsa sub system */
-	pcie_sas: system_controller@a0000000 {
-		compatible = "hisilicon,dsa-subctrl", "syscon";
-		reg = <0xa0000000 0x10000>;
-	};
-
------------------------------------------------------------------------
-Hisilicon CPU controller
-
-Required properties:
-- compatible : "hisilicon,cpuctrl"
-- reg : Register address and size
-
-The clock registers and power registers of secondary cores are defined
-in CPU controller, especially in HIX5HD2 SoC.
-
------------------------------------------------------------------------
-PCTRL: Peripheral misc control register
-
-Required Properties:
-- compatible: "hisilicon,pctrl"
-- reg: Address and size of pctrl.
-
-Example:
-
-	/* for Hi3620 */
-	pctrl: pctrl@fca09000 {
-		compatible = "hisilicon,pctrl";
-		reg = <0xfca09000 0x1000>;
-	};
-
------------------------------------------------------------------------
-Fabric:
-
-Required Properties:
-- compatible: "hisilicon,hip04-fabric";
-- reg: Address and size of Fabric
-
------------------------------------------------------------------------
-Bootwrapper boot method (software protocol on SMP):
-
-Required Properties:
-- compatible: "hisilicon,hip04-bootwrapper";
-- boot-method: Address and size of boot method.
-  [0]: bootwrapper physical address
-  [1]: bootwrapper size
-  [2]: relocation physical address
-  [3]: relocation size
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
new file mode 100644
index 000000000000..b38458022946
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/hisilicon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Platforms Device Tree Bindings
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+properties:
+  $nodename:
+    const: '/'
+
+  compatible:
+    oneOf:
+      - description: Hi3660 based boards.
+        items:
+          - const: hisilicon,hi3660-hikey960
+          - const: hisilicon,hi3660
+
+      - description: Hi3670 based boards.
+        items:
+          - const: hisilicon,hi3670-hikey970
+          - const: hisilicon,hi3670
+
+      - description: Hi3798cv200 based boards.
+        items:
+          - const: hisilicon,hi3798cv200-poplar
+          - const: hisilicon,hi3798cv200
+
+      - description: Hi4511 Board
+        items:
+          - const: hisilicon,hi3620-hi4511
+
+      - description: Hi6220 based boards.
+        items:
+          - const: hisilicon,hi6220-hikey
+          - const: hisilicon,hi6220
+
+      - description: HiP01 based boards.
+        items:
+          - const: hisilicon,hip01-ca9x2
+          - const: hisilicon,hip01
+
+      - description: HiP04 D01 Board
+        items:
+          - const: hisilicon,hip04-d01
+
+      - description: HiP05 D02 Board
+        items:
+          - const: hisilicon,hip05-d02
+
+      - description: HiP06 D03 Board
+        items:
+          - const: hisilicon,hip06-d03
+
+      - description: HiP07 D05 Board
+        items:
+          - const: hisilicon,hip07-d05
+
+      - description: SD5203 based boards
+        items:
+          - const: H836ASDJ
+          - const: hisilicon,sd5203
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml b/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml
new file mode 100644
index 000000000000..3b36e683bb15
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/low-pin-count.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon HiP06 Low Pin Count device
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  Hisilicon HiP06 SoCs implement a Low Pin Count (LPC) controller, which
+  provides I/O access to some legacy ISA devices.
+  HiP06 is based on arm64 architecture where there is no I/O space. So, the
+  I/O ports here are not CPU addresses, and there is no 'ranges' property in
+  LPC device node.
+
+properties:
+  $nodename:
+    pattern: '^isa@[0-9a-f]+$'
+    description: |
+      The node name before '@' must be "isa" to represent the binding stick
+      to the ISA/EISA binding specification.
+
+  compatible:
+    enum:
+      - hisilicon,hip06-lpc
+      - hisilicon,hip07-lpc
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    isa@a01b0000 {
+        compatible = "hisilicon,hip06-lpc";
+        #address-cells = <2>;
+        #size-cells = <1>;
+        reg = <0xa01b0000 0x1000>;
+
+        ipmi0: bt@e4 {
+            compatible = "ipmi-bt";
+            device_type = "ipmi";
+            reg = <0x01 0xe4 0x04>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/hpe,gxp.yaml b/Documentation/devicetree/bindings/arm/hpe,gxp.yaml
new file mode 100644
index 000000000000..224bbcb93f95
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hpe,gxp.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hpe,gxp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE BMC GXP platforms
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+  - Jean-Marie Verdun <verdun@hpe.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: GXP Based Boards
+        items:
+          - enum:
+              - hpe,gxp-dl360gen10
+          - const: hpe,gxp
+
+required:
+  - compatible
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/idle-states.yaml b/Documentation/devicetree/bindings/arm/idle-states.yaml
deleted file mode 100644
index ea805c1e6b20..000000000000
--- a/Documentation/devicetree/bindings/arm/idle-states.yaml
+++ /dev/null
@@ -1,661 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/idle-states.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: ARM idle states binding description
-
-maintainers:
-  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-
-description: |+
-  ==========================================
-  1 - Introduction
-  ==========================================
-
-  ARM systems contain HW capable of managing power consumption dynamically,
-  where cores can be put in different low-power states (ranging from simple wfi
-  to power gating) according to OS PM policies. The CPU states representing the
-  range of dynamic idle states that a processor can enter at run-time, can be
-  specified through device tree bindings representing the parameters required to
-  enter/exit specific idle states on a given processor.
-
-  According to the Server Base System Architecture document (SBSA, [3]), the
-  power states an ARM CPU can be put into are identified by the following list:
-
-  - Running
-  - Idle_standby
-  - Idle_retention
-  - Sleep
-  - Off
-
-  The power states described in the SBSA document define the basic CPU states on
-  top of which ARM platforms implement power management schemes that allow an OS
-  PM implementation to put the processor in different idle states (which include
-  states listed above; "off" state is not an idle state since it does not have
-  wake-up capabilities, hence it is not considered in this document).
-
-  Idle state parameters (e.g. entry latency) are platform specific and need to
-  be characterized with bindings that provide the required information to OS PM
-  code so that it can build the required tables and use them at runtime.
-
-  The device tree binding definition for ARM idle states is the subject of this
-  document.
-
-  ===========================================
-  2 - idle-states definitions
-  ===========================================
-
-  Idle states are characterized for a specific system through a set of
-  timing and energy related properties, that underline the HW behaviour
-  triggered upon idle states entry and exit.
-
-  The following diagram depicts the CPU execution phases and related timing
-  properties required to enter and exit an idle state:
-
-  ..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__..
-              |          |           |          |          |
-
-              |<------ entry ------->|
-              |       latency        |
-                                                |<- exit ->|
-                                                |  latency |
-              |<-------- min-residency -------->|
-                         |<-------  wakeup-latency ------->|
-
-      Diagram 1: CPU idle state execution phases
-
-  EXEC:  Normal CPU execution.
-
-  PREP:  Preparation phase before committing the hardware to idle mode
-    like cache flushing. This is abortable on pending wake-up
-    event conditions. The abort latency is assumed to be negligible
-    (i.e. less than the ENTRY + EXIT duration). If aborted, CPU
-    goes back to EXEC. This phase is optional. If not abortable,
-    this should be included in the ENTRY phase instead.
-
-  ENTRY:  The hardware is committed to idle mode. This period must run
-    to completion up to IDLE before anything else can happen.
-
-  IDLE:  This is the actual energy-saving idle period. This may last
-    between 0 and infinite time, until a wake-up event occurs.
-
-  EXIT:  Period during which the CPU is brought back to operational
-    mode (EXEC).
-
-  entry-latency: Worst case latency required to enter the idle state. The
-  exit-latency may be guaranteed only after entry-latency has passed.
-
-  min-residency: Minimum period, including preparation and entry, for a given
-  idle state to be worthwhile energywise.
-
-  wakeup-latency: Maximum delay between the signaling of a wake-up event and the
-  CPU being able to execute normal code again. If not specified, this is assumed
-  to be entry-latency + exit-latency.
-
-  These timing parameters can be used by an OS in different circumstances.
-
-  An idle CPU requires the expected min-residency time to select the most
-  appropriate idle state based on the expected expiry time of the next IRQ
-  (i.e. wake-up) that causes the CPU to return to the EXEC phase.
-
-  An operating system scheduler may need to compute the shortest wake-up delay
-  for CPUs in the system by detecting how long will it take to get a CPU out
-  of an idle state, e.g.:
-
-  wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0)
-
-  In other words, the scheduler can make its scheduling decision by selecting
-  (e.g. waking-up) the CPU with the shortest wake-up delay.
-  The wake-up delay must take into account the entry latency if that period
-  has not expired. The abortable nature of the PREP period can be ignored
-  if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than
-  the worst case since it depends on the CPU operating conditions, i.e. caches
-  state).
-
-  An OS has to reliably probe the wakeup-latency since some devices can enforce
-  latency constraint guarantees to work properly, so the OS has to detect the
-  worst case wake-up latency it can incur if a CPU is allowed to enter an
-  idle state, and possibly to prevent that to guarantee reliable device
-  functioning.
-
-  The min-residency time parameter deserves further explanation since it is
-  expressed in time units but must factor in energy consumption coefficients.
-
-  The energy consumption of a cpu when it enters a power state can be roughly
-  characterised by the following graph:
-
-                 |
-                 |
-                 |
-             e   |
-             n   |                                      /---
-             e   |                               /------
-             r   |                        /------
-             g   |                  /-----
-             y   |           /------
-                 |       ----
-                 |      /|
-                 |     / |
-                 |    /  |
-                 |   /   |
-                 |  /    |
-                 | /     |
-                 |/      |
-            -----|-------+----------------------------------
-                0|       1                              time(ms)
-
-      Graph 1: Energy vs time example
-
-  The graph is split in two parts delimited by time 1ms on the X-axis.
-  The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope
-  and denotes the energy costs incurred while entering and leaving the idle
-  state.
-  The graph curve in the area delimited by X-axis values = {x | x > 1ms } has
-  shallower slope and essentially represents the energy consumption of the idle
-  state.
-
-  min-residency is defined for a given idle state as the minimum expected
-  residency time for a state (inclusive of preparation and entry) after
-  which choosing that state become the most energy efficient option. A good
-  way to visualise this, is by taking the same graph above and comparing some
-  states energy consumptions plots.
-
-  For sake of simplicity, let's consider a system with two idle states IDLE1,
-  and IDLE2:
-
-            |
-            |
-            |
-            |                                                  /-- IDLE1
-         e  |                                              /---
-         n  |                                         /----
-         e  |                                     /---
-         r  |                                /-----/--------- IDLE2
-         g  |                    /-------/---------
-         y  |        ------------    /---|
-            |       /           /----    |
-            |      /        /---         |
-            |     /    /----             |
-            |    / /---                  |
-            |   ---                      |
-            |  /                         |
-            | /                          |
-            |/                           |                  time
-         ---/----------------------------+------------------------
-            |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy
-                                         |
-                                  IDLE2-min-residency
-
-      Graph 2: idle states min-residency example
-
-  In graph 2 above, that takes into account idle states entry/exit energy
-  costs, it is clear that if the idle state residency time (i.e. time till next
-  wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state
-  choice energywise.
-
-  This is mainly down to the fact that IDLE1 entry/exit energy costs are lower
-  than IDLE2.
-
-  However, the lower power consumption (i.e. shallower energy curve slope) of
-  idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy
-  efficient.
-
-  The time at which IDLE2 becomes more energy efficient than IDLE1 (and other
-  shallower states in a system with multiple idle states) is defined
-  IDLE2-min-residency and corresponds to the time when energy consumption of
-  IDLE1 and IDLE2 states breaks even.
-
-  The definitions provided in this section underpin the idle states
-  properties specification that is the subject of the following sections.
-
-  ===========================================
-  3 - idle-states node
-  ===========================================
-
-  ARM processor idle states are defined within the idle-states node, which is
-  a direct child of the cpus node [1] and provides a container where the
-  processor idle states, defined as device tree nodes, are listed.
-
-  On ARM systems, it is a container of processor idle states nodes. If the
-  system does not provide CPU power management capabilities, or the processor
-  just supports idle_standby, an idle-states node is not required.
-
-  ===========================================
-  4 - References
-  ===========================================
-
-  [1] ARM Linux Kernel documentation - CPUs bindings
-      Documentation/devicetree/bindings/arm/cpus.yaml
-
-  [2] ARM Linux Kernel documentation - PSCI bindings
-      Documentation/devicetree/bindings/arm/psci.yaml
-
-  [3] ARM Server Base System Architecture (SBSA)
-      http://infocenter.arm.com/help/index.jsp
-
-  [4] ARM Architecture Reference Manuals
-      http://infocenter.arm.com/help/index.jsp
-
-  [6] ARM Linux Kernel documentation - Booting AArch64 Linux
-      Documentation/arm64/booting.rst
-
-properties:
-  $nodename:
-    const: idle-states
-
-  entry-method:
-    description: |
-      Usage and definition depend on ARM architecture version.
-
-      On ARM v8 64-bit this property is required.
-      On ARM 32-bit systems this property is optional
-
-      This assumes that the "enable-method" property is set to "psci" in the cpu
-      node[6] that is responsible for setting up CPU idle management in the OS
-      implementation.
-    const: psci
-
-patternProperties:
-  "^(cpu|cluster)-":
-    type: object
-    description: |
-      Each state node represents an idle state description and must be defined
-      as follows.
-
-      The idle state entered by executing the wfi instruction (idle_standby
-      SBSA,[3][4]) is considered standard on all ARM platforms and therefore
-      must not be listed.
-
-      In addition to the properties listed above, a state node may require
-      additional properties specific to the entry-method defined in the
-      idle-states node. Please refer to the entry-method bindings
-      documentation for properties definitions.
-
-    properties:
-      compatible:
-        const: arm,idle-state
-
-      local-timer-stop:
-        description:
-          If present the CPU local timer control logic is
-             lost on state entry, otherwise it is retained.
-        type: boolean
-
-      entry-latency-us:
-        description:
-          Worst case latency in microseconds required to enter the idle state.
-
-      exit-latency-us:
-        description:
-          Worst case latency in microseconds required to exit the idle state.
-          The exit-latency-us duration may be guaranteed only after
-          entry-latency-us has passed.
-
-      min-residency-us:
-        description:
-          Minimum residency duration in microseconds, inclusive of preparation
-          and entry, for this idle state to be considered worthwhile energy wise
-          (refer to section 2 of this document for a complete description).
-
-      wakeup-latency-us:
-        description: |
-          Maximum delay between the signaling of a wake-up event and the CPU
-          being able to execute normal code again. If omitted, this is assumed
-          to be equal to:
-
-            entry-latency-us + exit-latency-us
-
-          It is important to supply this value on systems where the duration of
-          PREP phase (see diagram 1, section 2) is non-neglibigle. In such
-          systems entry-latency-us + exit-latency-us will exceed
-          wakeup-latency-us by this duration.
-
-      idle-state-name:
-        $ref: /schemas/types.yaml#definitions/string
-        description:
-          A string used as a descriptive name for the idle state.
-
-    required:
-      - compatible
-      - entry-latency-us
-      - exit-latency-us
-      - min-residency-us
-
-additionalProperties: false
-
-examples:
-  - |
-
-    cpus {
-        #size-cells = <0>;
-        #address-cells = <2>;
-
-        cpu@0 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x0>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@1 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x1>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x100>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x101>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@10000 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x10000>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@10001 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x10001>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@10100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x10100>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@10101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x10101>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@100000000 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x0>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100000001 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x1>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100000100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x100>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100000101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x101>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100010000 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x10000>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100010001 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x10001>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100010100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x10100>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100010101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x10101>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        idle-states {
-            entry-method = "psci";
-
-            CPU_RETENTION_0_0: cpu-retention-0-0 {
-                compatible = "arm,idle-state";
-                arm,psci-suspend-param = <0x0010000>;
-                entry-latency-us = <20>;
-                exit-latency-us = <40>;
-                min-residency-us = <80>;
-            };
-
-            CLUSTER_RETENTION_0: cluster-retention-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x1010000>;
-                entry-latency-us = <50>;
-                exit-latency-us = <100>;
-                min-residency-us = <250>;
-                wakeup-latency-us = <130>;
-            };
-
-            CPU_SLEEP_0_0: cpu-sleep-0-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x0010000>;
-                entry-latency-us = <250>;
-                exit-latency-us = <500>;
-                min-residency-us = <950>;
-            };
-
-            CLUSTER_SLEEP_0: cluster-sleep-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x1010000>;
-                entry-latency-us = <600>;
-                exit-latency-us = <1100>;
-                min-residency-us = <2700>;
-                wakeup-latency-us = <1500>;
-            };
-
-            CPU_RETENTION_1_0: cpu-retention-1-0 {
-                compatible = "arm,idle-state";
-                arm,psci-suspend-param = <0x0010000>;
-                entry-latency-us = <20>;
-                exit-latency-us = <40>;
-                min-residency-us = <90>;
-            };
-
-            CLUSTER_RETENTION_1: cluster-retention-1 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x1010000>;
-                entry-latency-us = <50>;
-                exit-latency-us = <100>;
-                min-residency-us = <270>;
-                wakeup-latency-us = <100>;
-            };
-
-            CPU_SLEEP_1_0: cpu-sleep-1-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x0010000>;
-                entry-latency-us = <70>;
-                exit-latency-us = <100>;
-                min-residency-us = <300>;
-                wakeup-latency-us = <150>;
-            };
-
-            CLUSTER_SLEEP_1: cluster-sleep-1 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x1010000>;
-                entry-latency-us = <500>;
-                exit-latency-us = <1200>;
-                min-residency-us = <3500>;
-                wakeup-latency-us = <1300>;
-            };
-        };
-    };
-
-  - |
-    // Example 2 (ARM 32-bit, 8-cpu system, two clusters):
-
-    cpus {
-        #size-cells = <0>;
-        #address-cells = <1>;
-
-        cpu@0 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a15";
-            reg = <0x0>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
-        };
-
-        cpu@1 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a15";
-            reg = <0x1>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
-        };
-
-        cpu@2 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a15";
-            reg = <0x2>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
-        };
-
-        cpu@3 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a15";
-            reg = <0x3>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
-        };
-
-        cpu@100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a7";
-            reg = <0x100>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
-        };
-
-        cpu@101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a7";
-            reg = <0x101>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
-        };
-
-        cpu@102 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a7";
-            reg = <0x102>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
-        };
-
-        cpu@103 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a7";
-            reg = <0x103>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
-        };
-
-        idle-states {
-            cpu_sleep_0_0: cpu-sleep-0-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                entry-latency-us = <200>;
-                exit-latency-us = <100>;
-                min-residency-us = <400>;
-                wakeup-latency-us = <250>;
-            };
-
-            cluster_sleep_0: cluster-sleep-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                entry-latency-us = <500>;
-                exit-latency-us = <1500>;
-                min-residency-us = <2500>;
-                wakeup-latency-us = <1700>;
-            };
-
-            cpu_sleep_1_0: cpu-sleep-1-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                entry-latency-us = <300>;
-                exit-latency-us = <500>;
-                min-residency-us = <900>;
-                wakeup-latency-us = <600>;
-            };
-
-            cluster_sleep_1: cluster-sleep-1 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                entry-latency-us = <800>;
-                exit-latency-us = <2000>;
-                min-residency-us = <6500>;
-                wakeup-latency-us = <2300>;
-            };
-        };
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/arm/intel,keembay.yaml b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
new file mode 100644
index 000000000000..53d2ce02b207
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/intel,keembay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keem Bay platform
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - intel,keembay-evm
+      - const: intel,keembay
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/intel,socfpga.yaml b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
new file mode 100644
index 000000000000..4b4dcf551eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/intel,socfpga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA platform
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: AgileX boards
+        items:
+          - enum:
+              - intel,n5x-socdk
+              - intel,socfpga-agilex-n6000
+              - intel,socfpga-agilex-socdk
+          - const: intel,socfpga-agilex
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
index f4f7451e5e8a..553dcbc70e35 100644
--- a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
+++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
@@ -4,19 +4,24 @@
 $id: http://devicetree.org/schemas/arm/intel-ixp4xx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel IXP4xx Device Tree Bindings
+title: Intel IXP4xx
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     oneOf:
       - items:
           - enum:
               - linksys,nslu2
+              - welltech,epbx100
           - const: intel,ixp42x
       - items:
           - enum:
               - gateworks,gw2358
           - const: intel,ixp43x
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/juno,scpi.txt b/Documentation/devicetree/bindings/arm/juno,scpi.txt
deleted file mode 100644
index 2ace8696bbee..000000000000
--- a/Documentation/devicetree/bindings/arm/juno,scpi.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-System Control and Power Interface (SCPI) Message Protocol
-(in addition to the standard binding in [0])
-
-Juno SRAM and Shared Memory for SCPI
-------------------------------------
-
-Required properties:
-- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM
-
-Each sub-node represents the reserved area for SCPI.
-
-Required sub-node properties:
-- reg : The base offset and size of the reserved area with the SRAM
-- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based
-	       shared memory on Juno platforms
-
-Sensor bindings for the sensors based on SCPI Message Protocol
---------------------------------------------------------------
-Required properties:
-- compatible : should be "arm,scpi-sensors".
-- #thermal-sensor-cells: should be set to 1.
-			 For Juno R0 and Juno R1 refer to [1] for the
-			 sensor identifiers
-
-[0] Documentation/devicetree/bindings/arm/arm,scpi.txt
-[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
new file mode 100644
index 000000000000..5cbcacaeb441
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/keystone/ti,k3-sci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common K3 TI-SCI bindings
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  The TI K3 family of SoCs usually have a central System Controller Processor
+  that is responsible for managing various SoC-level resources like clocks,
+  resets, interrupts etc. The communication with that processor is performed
+  through the TI-SCI protocol.
+
+  Each specific device management node like a clock controller node, a reset
+  controller node or an interrupt-controller node should define a common set
+  of properties that enables them to implement the corresponding functionality
+  over the TI-SCI protocol. The following are some of the common properties
+  needed by such individual nodes. The required properties for each device
+  management node is defined in the respective binding.
+
+properties:
+  ti,sci:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Should be a phandle to the TI-SCI System Controller node
+
+  ti,sci-dev-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Should contain the TI-SCI device id corresponding to the device. Please
+      refer to the corresponding System Controller documentation for valid
+      values for the desired device.
+
+  ti,sci-proc-ids:
+    description: Should contain a single tuple of <proc_id host_id>.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: TI-SCI processor id for the remote processor device
+      - description: TI-SCI host id to which processor control ownership
+                     should be transferred to
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
deleted file mode 100644
index 6f0cd31c1520..000000000000
--- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-Texas Instruments System Control Interface (TI-SCI) Message Protocol
---------------------------------------------------------------------
-
-Texas Instrument's processors including those belonging to Keystone generation
-of processors have separate hardware entity which is now responsible for the
-management of the System on Chip (SoC) system. These include various system
-level functions as well.
-
-An example of such an SoC is K2G, which contains the system control hardware
-block called Power Management Micro Controller (PMMC). This hardware block is
-initialized early into boot process and provides services to Operating Systems
-on multiple processors including ones running Linux.
-
-See http://processors.wiki.ti.com/index.php/TISCI for protocol definition.
-
-TI-SCI controller Device Node:
-=============================
-
-The TI-SCI node describes the Texas Instrument's System Controller entity node.
-This parent node may optionally have additional children nodes which describe
-specific functionality such as clocks, power domain, reset or additional
-functionality as may be required for the SoC. This hierarchy also describes the
-relationship between the TI-SCI parent node to the child node.
-
-Required properties:
--------------------
-- compatible:	should be "ti,k2g-sci" for TI 66AK2G SoC
-		should be "ti,am654-sci" for for TI AM654 SoC
-- mbox-names:
-	"rx" - Mailbox corresponding to receive path
-	"tx" - Mailbox corresponding to transmit path
-
-- mboxes: Mailboxes corresponding to the mbox-names. Each value of the mboxes
-	  property should contain a phandle to the mailbox controller device
-	  node and an args specifier that will be the phandle to the intended
-	  sub-mailbox child node to be used for communication.
-
-See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details
-about the generic mailbox controller and client driver bindings. Also see
-Documentation/devicetree/bindings/mailbox/ti,message-manager.txt for typical
-controller that is used to communicate with this System controllers.
-
-Optional Properties:
--------------------
-- reg-names:
-	debug_messages - Map the Debug message region
-- reg:  register space corresponding to the debug_messages
-- ti,system-reboot-controller: If system reboot can be triggered by SoC reboot
-- ti,host-id: Integer value corresponding to the host ID assigned by Firmware
-	for identification of host processing entities such as virtual
-	machines
-
-Example (K2G):
--------------
-	pmmc: pmmc {
-		compatible = "ti,k2g-sci";
-		ti,host-id = <2>;
-		mbox-names = "rx", "tx";
-		mboxes= <&msgmgr &msgmgr_proxy_pmmc_rx>,
-			<&msgmgr &msgmgr_proxy_pmmc_tx>;
-		reg-names = "debug_messages";
-		reg = <0x02921800 0x800>;
-	};
-
-
-TI-SCI Client Device Node:
-=========================
-
-Client nodes are maintained as children of the relevant TI-SCI device node.
-
-Example (K2G):
--------------
-	pmmc: pmmc {
-		compatible = "ti,k2g-sci";
-		...
-
-		my_clk_node: clk_node {
-			...
-			...
-		};
-
-		my_pd_node: pd_node {
-			...
-			...
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
new file mode 100644
index 000000000000..34f5f877d444
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/keystone/ti,sci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI controller device node bindings
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Texas Instrument's processors including those belonging to Keystone generation
+  of processors have separate hardware entity which is now responsible for the
+  management of the System on Chip (SoC) system. These include various system
+  level functions as well.
+
+  An example of such an SoC is K2G, which contains the system control hardware
+  block called Power Management Micro Controller (PMMC). This hardware block is
+  initialized early into boot process and provides services to Operating Systems
+  on multiple processors including ones running Linux.
+
+  See http://processors.wiki.ti.com/index.php/TISCI for protocol definition.
+
+  The TI-SCI node describes the Texas Instrument's System Controller entity node.
+  This parent node may optionally have additional children nodes which describe
+  specific functionality such as clocks, power domain, reset or additional
+  functionality as may be required for the SoC. This hierarchy also describes the
+  relationship between the TI-SCI parent node to the child node.
+
+properties:
+  $nodename:
+    pattern: "^system-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - description: System controller on TI 66AK2G SoC and other K3 SoCs
+        items:
+          - const: ti,k2g-sci
+      - description: System controller on TI AM654 SoC
+        items:
+          - const: ti,am654-sci
+
+  reg-names:
+    description: |
+      Specifies the debug messages memory mapped region that is optionally
+      made available from TI-SCI controller.
+    const: debug_messages
+
+  reg:
+    minItems: 1
+
+  mbox-names:
+    description: |
+      Specifies the mailboxes used to communicate with TI-SCI Controller
+      made available from TI-SCI controller.
+    items:
+      - const: rx
+      - const: tx
+
+  mboxes:
+    minItems: 2
+
+  ti,system-reboot-controller:
+    description: Determines If system reboot can be triggered by SoC reboot
+    type: boolean
+
+  ti,host-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Value corresponding to the host ID assigned by Firmware
+      for identification of host processing entities such as virtual machines.
+
+  power-controller:
+    type: object
+    $ref: /schemas/soc/ti/sci-pm-domain.yaml#
+
+  clock-controller:
+    type: object
+    $ref: /schemas/clock/ti,sci-clk.yaml#
+
+  reset-controller:
+    type: object
+    $ref: /schemas/reset/ti,sci-reset.yaml#
+
+required:
+  - compatible
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    pmmc: system-controller@2921800 {
+      compatible = "ti,k2g-sci";
+      ti,system-reboot-controller;
+      mbox-names = "rx", "tx";
+      mboxes= <&msgmgr 5 2>,
+              <&msgmgr 0 0>;
+      reg-names = "debug_messages";
+      reg = <0x02921800 0x800>;
+    };
+
+  - |
+    dmsc: system-controller@44083000 {
+      compatible = "ti,k2g-sci";
+      ti,host-id = <12>;
+      mbox-names = "rx", "tx";
+      mboxes= <&secure_proxy_main 11>,
+              <&secure_proxy_main 13>;
+      reg-names = "debug_messages";
+      reg = <0x44083000 0x1000>;
+
+      k3_pds: power-controller {
+        compatible = "ti,sci-pm-domain";
+        #power-domain-cells = <2>;
+      };
+
+      k3_clks: clock-controller {
+        compatible = "ti,k2g-sci-clk";
+        #clock-cells = <2>;
+      };
+
+      k3_reset: reset-controller {
+        compatible = "ti,sci-reset";
+        #reset-cells = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
index 913a8cd8b2c0..6b8f4d4fa580 100644
--- a/Documentation/devicetree/bindings/arm/l2c2x0.yaml
+++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
@@ -29,27 +29,30 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - arm,pl310-cache
-      - arm,l220-cache
-      - arm,l210-cache
-        # DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
-      - bcm,bcm11351-a2-pl310-cache
-        # For Broadcom bcm11351 chipset where an
-        # offset needs to be added to the address before passing down to the L2
-        # cache controller
-      - brcm,bcm11351-a2-pl310-cache
-        # Marvell Controller designed to be
-        # compatible with the ARM one, with system cache mode (meaning
-        # maintenance operations on L1 are broadcasted to the L2 and L2
-        # performs the same operation).
-      - marvell,aurora-system-cache
-        # Marvell Controller designed to be
-        # compatible with the ARM one with outer cache mode.
-      - marvell,aurora-outer-cache
-        # Marvell Tauros3 cache controller, compatible
-        # with arm,pl310-cache controller.
-      - marvell,tauros3-cache
+    oneOf:
+      - enum:
+          - arm,pl310-cache
+          - arm,l220-cache
+          - arm,l210-cache
+            # DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
+          - bcm,bcm11351-a2-pl310-cache
+            # For Broadcom bcm11351 chipset where an
+            # offset needs to be added to the address before passing down to the L2
+            # cache controller
+          - brcm,bcm11351-a2-pl310-cache
+            # Marvell Controller designed to be
+            # compatible with the ARM one, with system cache mode (meaning
+            # maintenance operations on L1 are broadcasted to the L2 and L2
+            # performs the same operation).
+          - marvell,aurora-system-cache
+            # Marvell Controller designed to be
+            # compatible with the ARM one with outer cache mode.
+          - marvell,aurora-outer-cache
+      - items:
+           # Marvell Tauros3 cache controller, compatible
+           # with arm,pl310-cache controller.
+          - const: marvell,tauros3-cache
+          - const: arm,pl310-cache
 
   cache-level:
     const: 2
@@ -67,43 +70,39 @@ properties:
     description: Cycles of latency for Data RAM accesses. Specifies 3 cells of
       read, write and setup latencies. Minimum valid values are 1. Controllers
       without setup latency control should use a value of 0.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 2
-        maxItems: 3
-        items:
-          minimum: 0
-          maximum: 8
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 3
+    items:
+      minimum: 0
+      maximum: 8
 
   arm,tag-latency:
     description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of
       read, write and setup latencies. Controllers without setup latency control
       should use 0. Controllers without separate read and write Tag RAM latency
       values should only use the first cell.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 3
-        items:
-          minimum: 0
-          maximum: 8
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 3
+    items:
+      minimum: 0
+      maximum: 8
 
   arm,dirty-latency:
     description: Cycles of latency for Dirty RAMs. This is a single cell.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 1
-        maximum: 8
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
 
   arm,filter-ranges:
     description: <start length> Starting address and length of window to
       filter. Addresses in the filter window are directed to the M1 port. Other
       addresses will go to the M0 port.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          minItems: 2
-          maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minItems: 2
+      maxItems: 2
 
   arm,io-coherent:
     description: indicates that the system is operating in an hardware
@@ -128,36 +127,31 @@ properties:
   arm,double-linefill:
     description: Override double linefill enable setting. Enable if
       non-zero, disable if zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,double-linefill-incr:
     description: Override double linefill on INCR read. Enable
       if non-zero, disable if zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,double-linefill-wrap:
     description: Override double linefill on WRAP read. Enable
       if non-zero, disable if zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,prefetch-drop:
     description: Override prefetch drop enable setting. Enable if non-zero,
       disable if zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,prefetch-offset:
     description: Override prefetch offset value.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31]
 
   arm,shared-override:
     description: The default behavior of the L220 or PL310 cache
@@ -190,35 +184,31 @@ properties:
     description: |
       Data prefetch. Value: <0> (forcibly disable), <1>
       (forcibly enable), property absent (retain settings set by firmware)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   prefetch-instr:
     description: |
       Instruction prefetch. Value: <0> (forcibly disable),
       <1> (forcibly enable), property absent (retain settings set by
       firmware)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,dynamic-clock-gating:
     description: |
       L2 dynamic clock gating. Value: <0> (forcibly
       disable), <1> (forcibly enable), property absent (OS specific behavior,
       preferably retain firmware settings)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,standby-mode:
     description: L2 standby mode enable. Value <0> (forcibly disable),
       <1> (forcibly enable), property absent (OS specific behavior,
       preferably retain firmware settings)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,early-bresp-disable:
     description: Disable the CA9 optimization Early BRESP (PL310)
diff --git a/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml b/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml
new file mode 100644
index 000000000000..c7c5eb48fc7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/linux,dummy-virt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QEMU virt machine
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    const: linux,dummy-virt
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
index 098d932fc963..c83245065d44 100644
--- a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
@@ -72,7 +72,7 @@ mpp19	19	gpio, uart0(rxd), sdio(pw_off)
 GPIO:
 -----
 For common binding part and usage, refer to
-Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
+Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml.
 
 Required properties:
 
@@ -80,6 +80,11 @@ Required properties:
 
 - offset: offset address inside the syscon block
 
+Optional properties:
+
+- marvell,pwm-offset: offset address of PWM duration control registers inside
+  the syscon block
+
 Example:
 ap_syscon: system-controller@6f4000 {
 	compatible = "syscon", "simple-mfd";
@@ -101,6 +106,9 @@ ap_syscon: system-controller@6f4000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-ranges = <&ap_pinctrl 0 0 19>;
+		marvell,pwm-offset = <0x10c0>;
+		#pwm-cells = <2>;
+		clocks = <&ap_clk 3>;
 	};
 };
 
@@ -111,7 +119,7 @@ Thermal:
 --------
 
 For common binding part and usage, refer to
-Documentation/devicetree/bindings/thermal/thermal.txt
+Documentation/devicetree/bindings/thermal/thermal*.yaml
 
 The thermal IP can probe the temperature all around the processor. It
 may feature several channels, each of them wired to one sensor.
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
index f6d6642d81c0..29fa93dad52b 100644
--- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
@@ -1,21 +1,3 @@
-Marvell Armada 37xx Platforms Device Tree Bindings
---------------------------------------------------
-
-Boards using a SoC of the Marvell Armada 37xx family must carry the
-following root node property:
-
- - compatible: must contain "marvell,armada3710"
-
-In addition, boards using the Marvell Armada 3720 SoC shall have the
-following property before the previous one:
-
- - compatible: must contain "marvell,armada3720"
-
-Example:
-
-compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
-
-
 Power management
 ----------------
 
@@ -48,11 +30,3 @@ avs: avs@11500 {
 	compatible = "marvell,armada-3700-avs", "syscon";
 	reg = <0x11500 0x40>;
 }
-
-
-CZ.NIC's Turris Mox SOHO router Device Tree Bindings
-----------------------------------------------------
-
-Required root node property:
-
- - compatible: must contain "cznic,turris-mox"
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
new file mode 100644
index 000000000000..6905d29f3108
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/armada-37xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 37xx Platforms
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Armada 3720 SoC boards
+        items:
+          - enum:
+              - cznic,turris-mox
+              - globalscale,espressobin
+              - marvell,armada-3720-db
+              - methode,edpu
+              - methode,udpu
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+      - description: Globalscale Espressobin boards
+        items:
+          - enum:
+              - globalscale,espressobin-emmc
+              - globalscale,espressobin-ultra
+              - globalscale,espressobin-v7
+          - const: globalscale,espressobin
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+      - description: Globalscale Espressobin V7 boards
+        items:
+          - enum:
+              - globalscale,espressobin-v7-emmc
+          - const: globalscale,espressobin-v7
+          - const: globalscale,espressobin
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
index a9828c50c0fb..e9bf3054529f 100644
--- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
@@ -59,3 +59,5 @@ properties:
           - const: marvell,cn9130
           - const: marvell,armada-ap807-quad
           - const: marvell,armada-ap807
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
index f982a8ed9396..d84105c7c935 100644
--- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
@@ -142,8 +142,8 @@ mpp50	50	gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(
 mpp51	51	gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10)
 mpp52	52	gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq)
 mpp53	53	gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led)
-mpp54	54	gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio(wr_protect)
-mpp55	55	gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio(card_detect)
+mpp54	54	gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio_wp(wr_protect)
+mpp55	55	gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio_cd(card_detect)
 mpp56	56	gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk)
 mpp57	57	gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd)
 mpp58	58	gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0)
@@ -156,7 +156,7 @@ GPIO:
 -----
 
 For common binding part and usage, refer to
-Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
+Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml.
 
 Required properties:
 
@@ -203,7 +203,7 @@ It is possible to setup an overheat interrupt by giving at least one
 critical point to any subnode of the thermal-zone node.
 
 For common binding part and usage, refer to
-Documentation/devicetree/bindings/thermal/thermal.txt
+Documentation/devicetree/bindings/thermal/thermal*.yaml
 
 Required properties:
 - compatible: must be one of:
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml
new file mode 100644
index 000000000000..8960fb8b2b2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,ac5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Alleycat5/5X Platforms
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Alleycat5 (98DX25xx) Reference Design
+        items:
+          - enum:
+              - marvell,rd-ac5
+          - const: marvell,ac5
+
+      - description: Alleycat5X (98DX35xx) Reference Design
+        items:
+          - enum:
+              - marvell,rd-ac5x
+          - const: marvell,ac5x
+          - const: marvell,ac5
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 4043c5046441..d76ce4c3819d 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/mediatek.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek SoC based Platforms Device Tree Bindings
+title: MediaTek SoC based Platforms
 
 maintainers:
   - Sean Wang <sean.wang@mediatek.com>
@@ -32,6 +32,11 @@ properties:
           - const: mediatek,mt6580
       - items:
           - enum:
+              - prestigio,pmt5008-3g
+          - const: mediatek,mt6582
+      - items:
+          - enum:
+              - fairphone,fp1
               - mundoreader,bq-aquaris5
           - const: mediatek,mt6589
       - items:
@@ -78,6 +83,14 @@ properties:
           - const: mediatek,mt7629
       - items:
           - enum:
+              - mediatek,mt7986a-rfb
+          - const: mediatek,mt7986a
+      - items:
+          - enum:
+              - mediatek,mt7986b-rfb
+          - const: mediatek,mt7986b
+      - items:
+          - enum:
               - mediatek,mt8127-moose
           - const: mediatek,mt8127
       - items:
@@ -86,10 +99,154 @@ properties:
           - const: mediatek,mt8135
       - items:
           - enum:
+              - mediatek,mt8167-pumpkin
+          - const: mediatek,mt8167
+      - description: Google Elm (Acer Chromebook R13)
+        items:
+          - const: google,elm-rev8
+          - const: google,elm-rev7
+          - const: google,elm-rev6
+          - const: google,elm-rev5
+          - const: google,elm-rev4
+          - const: google,elm-rev3
+          - const: google,elm
+          - const: mediatek,mt8173
+      - description: Google Hana (Lenovo Chromebook N23 Yoga, C330, 300e,...)
+        items:
+          - const: google,hana-rev6
+          - const: google,hana-rev5
+          - const: google,hana-rev4
+          - const: google,hana-rev3
+          - const: google,hana
+          - const: mediatek,mt8173
+      - description: Google Hana rev7 (Poin2 Chromebook 11C)
+        items:
+          - const: google,hana-rev7
+          - const: mediatek,mt8173
+      - items:
+          - enum:
               - mediatek,mt8173-evb
           - const: mediatek,mt8173
       - items:
           - enum:
               - mediatek,mt8183-evb
           - const: mediatek,mt8183
+      - description: Google Hayato
+        items:
+          - const: google,hayato-rev1
+          - const: google,hayato
+          - const: mediatek,mt8192
+      - description: Google Spherion (Acer Chromebook 514)
+        items:
+          - const: google,spherion-rev3
+          - const: google,spherion-rev2
+          - const: google,spherion-rev1
+          - const: google,spherion-rev0
+          - const: google,spherion
+          - const: mediatek,mt8192
+      - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - enum:
+              - google,tomato-rev2
+              - google,tomato-rev1
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - const: google,tomato-rev4
+          - const: google,tomato-rev3
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - items:
+          - enum:
+              - mediatek,mt8186-evb
+          - const: mediatek,mt8186
+      - items:
+          - enum:
+              - mediatek,mt8192-evb
+          - const: mediatek,mt8192
+      - items:
+          - enum:
+              - mediatek,mt8195-demo
+              - mediatek,mt8195-evb
+          - const: mediatek,mt8195
+      - description: Google Burnet (HP Chromebook x360 11MK G3 EE)
+        items:
+          - const: google,burnet
+          - const: mediatek,mt8183
+      - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
+        items:
+          - enum:
+              - google,krane-sku0
+              - google,krane-sku176
+          - const: google,krane
+          - const: mediatek,mt8183
+      - description: Google Cozmo (Acer Chromebook 314)
+        items:
+          - const: google,cozmo
+          - const: mediatek,mt8183
+      - description: Google Damu (ASUS Chromebook Flip CM3)
+        items:
+          - const: google,damu
+          - const: mediatek,mt8183
+      - description: Google Fennel (Lenovo IdeaPad 3 Chromebook)
+        items:
+          - enum:
+              - google,fennel-sku0
+              - google,fennel-sku1
+              - google,fennel-sku2
+              - google,fennel-sku6
+              - google,fennel-sku7
+          - const: google,fennel
+          - const: mediatek,mt8183
+      - description: Google Juniper (Acer Chromebook Spin 311) / Kenzo (Acer Chromebook 311)
+        items:
+          - enum:
+              - google,juniper-sku16
+              - google,juniper-sku17
+          - const: google,juniper
+          - const: mediatek,mt8183
+      - description: Google Kakadu (ASUS Chromebook Detachable CM3)
+        items:
+          - const: google,kakadu-rev3
+          - const: google,kakadu-rev2
+          - const: google,kakadu
+          - const: mediatek,mt8183
+      - description: Google Kakadu (ASUS Chromebook Detachable CM3)
+        items:
+          - const: google,kakadu-rev3-sku22
+          - const: google,kakadu-rev2-sku22
+          - const: google,kakadu
+          - const: mediatek,mt8183
+      - description: Google Kappa (HP Chromebook 11a)
+        items:
+          - const: google,kappa
+          - const: mediatek,mt8183
+      - description: Google Kodama (Lenovo 10e Chromebook Tablet)
+        items:
+          - enum:
+              - google,kodama-sku16
+              - google,kodama-sku272
+              - google,kodama-sku288
+              - google,kodama-sku32
+          - const: google,kodama
+          - const: mediatek,mt8183
+      - description: Google Willow (Acer Chromebook 311 C722/C722T)
+        items:
+          - enum:
+              - google,willow-sku0
+              - google,willow-sku1
+          - const: google,willow
+          - const: mediatek,mt8183
+      - items:
+          - enum:
+              - mediatek,mt8183-pumpkin
+          - const: mediatek,mt8183
+      - items:
+          - enum:
+              - mediatek,mt8516-pumpkin
+          - const: mediatek,mt8516
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
deleted file mode 100644
index ff000ccade78..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Mediatek apmixedsys controller
-==============================
-
-The Mediatek apmixedsys controller provides the PLLs to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-apmixedsys"
-	- "mediatek,mt2712-apmixedsys", "syscon"
-	- "mediatek,mt6779-apmixedsys", "syscon"
-	- "mediatek,mt6797-apmixedsys"
-	- "mediatek,mt7622-apmixedsys"
-	- "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
-	- "mediatek,mt7629-apmixedsys"
-	- "mediatek,mt8135-apmixedsys"
-	- "mediatek,mt8173-apmixedsys"
-	- "mediatek,mt8183-apmixedsys", "syscon"
-	- "mediatek,mt8516-apmixedsys"
-- #clock-cells: Must be 1
-
-The apmixedsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-apmixedsys: clock-controller@10209000 {
-	compatible = "mediatek,mt8173-apmixedsys";
-	reg = <0 0x10209000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
index e4ca7b703123..699776be1dd3 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
@@ -7,10 +7,13 @@ Required Properties:
 
 - compatible: Should be one of:
 	- "mediatek,mt2701-audsys", "syscon"
+	- "mediatek,mt6765-audsys", "syscon"
 	- "mediatek,mt6779-audio", "syscon"
 	- "mediatek,mt7622-audsys", "syscon"
 	- "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
+	- "mediatek,mt8167-audiosys", "syscon"
 	- "mediatek,mt8183-audiosys", "syscon"
+	- "mediatek,mt8192-audsys", "syscon"
 	- "mediatek,mt8516-audsys", "syscon"
 - #clock-cells: Must be 1
 
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt
index 1f4aaa15a37e..a0ce82085ad0 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt
@@ -6,6 +6,7 @@ The MediaTek camsys controller provides various clocks to the system.
 Required Properties:
 
 - compatible: Should be one of:
+	- "mediatek,mt6765-camsys", "syscon"
 	- "mediatek,mt6779-camsys", "syscon"
 	- "mediatek,mt8183-camsys", "syscon"
 - #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
index 6b7e8067e7aa..0502db73686b 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
@@ -10,6 +10,7 @@ Required Properties:
 	- "mediatek,mt7622-ethsys", "syscon"
 	- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
 	- "mediatek,mt7629-ethsys", "syscon"
+	- "mediatek,mt7986-ethsys", "syscon"
 - #clock-cells: Must be 1
 - #reset-cells: Must be 1
 
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
index 2b693e343c56..dce4c9241932 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
@@ -8,9 +8,11 @@ Required Properties:
 - compatible: Should be one of:
 	- "mediatek,mt2701-imgsys", "syscon"
 	- "mediatek,mt2712-imgsys", "syscon"
+	- "mediatek,mt6765-imgsys", "syscon"
 	- "mediatek,mt6779-imgsys", "syscon"
 	- "mediatek,mt6797-imgsys", "syscon"
 	- "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon"
+	- "mediatek,mt8167-imgsys", "syscon"
 	- "mediatek,mt8173-imgsys", "syscon"
 	- "mediatek,mt8183-imgsys", "syscon"
 - #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
deleted file mode 100644
index db2f4fd754e7..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Mediatek infracfg controller
-============================
-
-The Mediatek infracfg controller provides various clocks and reset
-outputs to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-infracfg", "syscon"
-	- "mediatek,mt2712-infracfg", "syscon"
-	- "mediatek,mt6779-infracfg_ao", "syscon"
-	- "mediatek,mt6797-infracfg", "syscon"
-	- "mediatek,mt7622-infracfg", "syscon"
-	- "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
-	- "mediatek,mt7629-infracfg", "syscon"
-	- "mediatek,mt8135-infracfg", "syscon"
-	- "mediatek,mt8173-infracfg", "syscon"
-	- "mediatek,mt8183-infracfg", "syscon"
-	- "mediatek,mt8516-infracfg", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The infracfg controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-Also it uses the common reset controller binding from
-Documentation/devicetree/bindings/reset/reset.txt.
-The available reset outputs are defined in
-dt-bindings/reset/mt*-resets.h
-
-Example:
-
-infracfg: power-controller@10001000 {
-	compatible = "mediatek,mt8173-infracfg", "syscon";
-	reg = <0 0x10001000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
new file mode 100644
index 000000000000..1d7c837d9378
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Infrastructure System Configuration Controller
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  The Mediatek infracfg controller provides various clocks and reset outputs
+  to the system. The clock values can be found in <dt-bindings/clock/mt*-clk.h>,
+  and reset values in <dt-bindings/reset/mt*-reset.h> and
+  <dt-bindings/reset/mt*-resets.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-infracfg
+              - mediatek,mt2712-infracfg
+              - mediatek,mt6765-infracfg
+              - mediatek,mt6795-infracfg
+              - mediatek,mt6779-infracfg_ao
+              - mediatek,mt6797-infracfg
+              - mediatek,mt7622-infracfg
+              - mediatek,mt7629-infracfg
+              - mediatek,mt7986-infracfg
+              - mediatek,mt8135-infracfg
+              - mediatek,mt8167-infracfg
+              - mediatek,mt8173-infracfg
+              - mediatek,mt8183-infracfg
+              - mediatek,mt8516-infracfg
+          - const: syscon
+      - items:
+          - const: mediatek,mt7623-infracfg
+          - const: mediatek,mt2701-infracfg
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mt2701-infracfg
+          - mediatek,mt2712-infracfg
+          - mediatek,mt6795-infracfg
+          - mediatek,mt7622-infracfg
+          - mediatek,mt7986-infracfg
+          - mediatek,mt8135-infracfg
+          - mediatek,mt8173-infracfg
+          - mediatek,mt8183-infracfg
+then:
+  required:
+    - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    infracfg: clock-controller@10001000 {
+        compatible = "mediatek,mt8173-infracfg", "syscon";
+        reg = <0x10001000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt
index ad5f9d2f6818..054424fb64b4 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt
@@ -8,6 +8,7 @@ Required Properties:
 - compatible: Should be one of:
 	- "mediatek,mt2712-mfgcfg", "syscon"
 	- "mediatek,mt6779-mfgcfg", "syscon"
+	- "mediatek,mt8167-mfgcfg", "syscon"
 	- "mediatek,mt8183-mfgcfg", "syscon"
 - #clock-cells: Must be 1
 
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt
new file mode 100644
index 000000000000..8be5978f388d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt
@@ -0,0 +1,28 @@
+Mediatek mipi0a (mipi_rx_ana_csi0a) controller
+============================
+
+The Mediatek mipi0a controller provides various clocks
+to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt6765-mipi0a", "syscon"
+- #clock-cells: Must be 1
+
+The mipi0a controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+The mipi0a controller also uses the common power domain from
+Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+The available power doamins are defined in dt-bindings/power/mt*-power.h.
+
+Example:
+
+mipi0a: clock-controller@11c10000 {
+	compatible = "mediatek,mt6765-mipi0a", "syscon";
+	reg = <0 0x11c10000 0 0x1000>;
+	power-domains = <&scpsys MT6765_POWER_DOMAIN_CAM>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
deleted file mode 100644
index 301eefbe1618..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Mediatek mmsys controller
-============================
-
-The Mediatek mmsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-mmsys", "syscon"
-	- "mediatek,mt2712-mmsys", "syscon"
-	- "mediatek,mt6779-mmsys", "syscon"
-	- "mediatek,mt6797-mmsys", "syscon"
-	- "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon"
-	- "mediatek,mt8173-mmsys", "syscon"
-	- "mediatek,mt8183-mmsys", "syscon"
-- #clock-cells: Must be 1
-
-The mmsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-mmsys: clock-controller@14000000 {
-	compatible = "mediatek,mt8173-mmsys", "syscon";
-	reg = <0 0x14000000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
new file mode 100644
index 000000000000..eb451bec23d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mmsys.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek mmsys controller
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  The MediaTek mmsys system controller provides clock control, routing control,
+  and miscellaneous control in mmsys partition.
+
+properties:
+  $nodename:
+    pattern: "^syscon@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-mmsys
+              - mediatek,mt2712-mmsys
+              - mediatek,mt6765-mmsys
+              - mediatek,mt6779-mmsys
+              - mediatek,mt6795-mmsys
+              - mediatek,mt6797-mmsys
+              - mediatek,mt8167-mmsys
+              - mediatek,mt8173-mmsys
+              - mediatek,mt8183-mmsys
+              - mediatek,mt8186-mmsys
+              - mediatek,mt8192-mmsys
+              - mediatek,mt8195-mmsys
+              - mediatek,mt8365-mmsys
+          - const: syscon
+      - items:
+          - const: mediatek,mt7623-mmsys
+          - const: mediatek,mt2701-mmsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier as defined by bindings
+      of the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  mboxes:
+    description:
+      Using mailbox to communicate with GCE, it should have this
+      property and list of phandle, mailbox specifiers. See
+      Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
+      for details.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  mediatek,gce-client-reg:
+    description:
+      The register of client driver can be configured by gce with 4 arguments
+      defined in this property, such as phandle of gce, subsys id,
+      register offset and size.
+      Each subsys id is mapping to a base address of display function blocks
+      register which is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    mmsys: syscon@14000000 {
+        compatible = "mediatek,mt8173-mmsys", "syscon";
+        reg = <0x14000000 0x1000>;
+        power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+                 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml
new file mode 100644
index 000000000000..9fbeb626ab23
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek PCIE Mirror Controller for MT7622
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek PCIE mirror provides a configuration interface for PCIE
+  controller on MT7622 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-pcie-mirror
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      pcie_mirror: pcie-mirror@10000400 {
+        compatible = "mediatek,mt7622-pcie-mirror", "syscon";
+        reg = <0 0x10000400 0 0x10>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
new file mode 100644
index 000000000000..84fb0a146b6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-wed.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Wireless Ethernet Dispatch Controller for MT7622
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek wireless ethernet dispatch controller can be configured to
+  intercept and handle access to the WLAN DMA queues and PCIe interrupts
+  and implement hardware flow offloading from ethernet to WLAN.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-wed
+          - mediatek,mt7986-wed
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      wed0: wed@1020a000 {
+        compatible = "mediatek,mt7622-wed","syscon";
+        reg = <0 0x1020a000 0 0x1000>;
+        interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml
new file mode 100644
index 000000000000..96221f51c1c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wed-pcie.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek PCIE WED Controller for MT7986
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek WED PCIE provides a configuration interface for PCIE
+  controller on MT7986 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7986-wed-pcie
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      wed_pcie: wed-pcie@10003000 {
+        compatible = "mediatek,mt7986-wed-pcie",
+                     "syscon";
+        reg = <0 0x10003000 0 0x10>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml
new file mode 100644
index 000000000000..cf1002c3efa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-clock.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Functional Clock Controller for MT8186
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8186-imp_iic_wrap
+          - mediatek,mt8186-mfgsys
+          - mediatek,mt8186-wpesys
+          - mediatek,mt8186-imgsys1
+          - mediatek,mt8186-imgsys2
+          - mediatek,mt8186-vdecsys
+          - mediatek,mt8186-vencsys
+          - mediatek,mt8186-camsys
+          - mediatek,mt8186-camsys_rawa
+          - mediatek,mt8186-camsys_rawb
+          - mediatek,mt8186-mdpsys
+          - mediatek,mt8186-ipesys
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    imp_iic_wrap: clock-controller@11017000 {
+        compatible = "mediatek,mt8186-imp_iic_wrap";
+        reg = <0x11017000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml
new file mode 100644
index 000000000000..661047d26e11
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-sys-clock.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek System Clock Controller for MT8186
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
+  The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+  The mcusys provides mux control to select the clock source in AP MCU.
+  The device nodes also provide the system control capacity for configuration.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8186-mcusys
+          - mediatek,mt8186-topckgen
+          - mediatek,mt8186-infracfg_ao
+          - mediatek,mt8186-apmixedsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: syscon@10000000 {
+        compatible = "mediatek,mt8186-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
new file mode 100644
index 000000000000..b57cc2e69efb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-clock.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Functional Clock Controller for MT8192
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The Mediatek functional clock controller provides various clocks on MT8192.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8192-scp_adsp
+          - mediatek,mt8192-imp_iic_wrap_c
+          - mediatek,mt8192-imp_iic_wrap_e
+          - mediatek,mt8192-imp_iic_wrap_s
+          - mediatek,mt8192-imp_iic_wrap_ws
+          - mediatek,mt8192-imp_iic_wrap_w
+          - mediatek,mt8192-imp_iic_wrap_n
+          - mediatek,mt8192-msdc_top
+          - mediatek,mt8192-mfgcfg
+          - mediatek,mt8192-imgsys
+          - mediatek,mt8192-imgsys2
+          - mediatek,mt8192-vdecsys_soc
+          - mediatek,mt8192-vdecsys
+          - mediatek,mt8192-vencsys
+          - mediatek,mt8192-camsys
+          - mediatek,mt8192-camsys_rawa
+          - mediatek,mt8192-camsys_rawb
+          - mediatek,mt8192-camsys_rawc
+          - mediatek,mt8192-ipesys
+          - mediatek,mt8192-mdpsys
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    scp_adsp: clock-controller@10720000 {
+        compatible = "mediatek,mt8192-scp_adsp";
+        reg = <0x10720000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_c: clock-controller@11007000 {
+        compatible = "mediatek,mt8192-imp_iic_wrap_c";
+        reg = <0x11007000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_e: clock-controller@11cb1000 {
+        compatible = "mediatek,mt8192-imp_iic_wrap_e";
+        reg = <0x11cb1000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_s: clock-controller@11d03000 {
+        compatible = "mediatek,mt8192-imp_iic_wrap_s";
+        reg = <0x11d03000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_ws: clock-controller@11d23000 {
+        compatible = "mediatek,mt8192-imp_iic_wrap_ws";
+        reg = <0x11d23000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_w: clock-controller@11e01000 {
+        compatible = "mediatek,mt8192-imp_iic_wrap_w";
+        reg = <0x11e01000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_n: clock-controller@11f02000 {
+        compatible = "mediatek,mt8192-imp_iic_wrap_n";
+        reg = <0x11f02000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    msdc_top: clock-controller@11f10000 {
+        compatible = "mediatek,mt8192-msdc_top";
+        reg = <0x11f10000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    mfgcfg: clock-controller@13fbf000 {
+        compatible = "mediatek,mt8192-mfgcfg";
+        reg = <0x13fbf000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys: clock-controller@15020000 {
+        compatible = "mediatek,mt8192-imgsys";
+        reg = <0x15020000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys2: clock-controller@15820000 {
+        compatible = "mediatek,mt8192-imgsys2";
+        reg = <0x15820000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vdecsys_soc: clock-controller@1600f000 {
+        compatible = "mediatek,mt8192-vdecsys_soc";
+        reg = <0x1600f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vdecsys: clock-controller@1602f000 {
+        compatible = "mediatek,mt8192-vdecsys";
+        reg = <0x1602f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vencsys: clock-controller@17000000 {
+        compatible = "mediatek,mt8192-vencsys";
+        reg = <0x17000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys: clock-controller@1a000000 {
+        compatible = "mediatek,mt8192-camsys";
+        reg = <0x1a000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_rawa: clock-controller@1a04f000 {
+        compatible = "mediatek,mt8192-camsys_rawa";
+        reg = <0x1a04f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_rawb: clock-controller@1a06f000 {
+        compatible = "mediatek,mt8192-camsys_rawb";
+        reg = <0x1a06f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_rawc: clock-controller@1a08f000 {
+        compatible = "mediatek,mt8192-camsys_rawc";
+        reg = <0x1a08f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    ipesys: clock-controller@1b000000 {
+        compatible = "mediatek,mt8192-ipesys";
+        reg = <0x1b000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    mdpsys: clock-controller@1f000000 {
+        compatible = "mediatek,mt8192-mdpsys";
+        reg = <0x1f000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
new file mode 100644
index 000000000000..27f79175c678
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-sys-clock.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek System Clock Controller for MT8192
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The Mediatek system clock controller provides various clocks and system configuration
+  like reset and bus protection on MT8192.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8192-topckgen
+          - mediatek,mt8192-infracfg
+          - mediatek,mt8192-pericfg
+          - mediatek,mt8192-apmixedsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: syscon@10000000 {
+        compatible = "mediatek,mt8192-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    infracfg: syscon@10001000 {
+        compatible = "mediatek,mt8192-infracfg", "syscon";
+        reg = <0x10001000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    pericfg: syscon@10003000 {
+        compatible = "mediatek,mt8192-pericfg", "syscon";
+        reg = <0x10003000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    apmixedsys: syscon@1000c000 {
+        compatible = "mediatek,mt8192-apmixedsys", "syscon";
+        reg = <0x1000c000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml
new file mode 100644
index 000000000000..17fcbb45d121
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml
@@ -0,0 +1,254 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-clock.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Functional Clock Controller for MT8195
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The clock architecture in Mediatek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices except apusys_pll provide clock gate control in different IP blocks.
+  The apusys_pll provides Plls which generated from SoC 26m for AI Processing Unit.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8195-scp_adsp
+          - mediatek,mt8195-imp_iic_wrap_s
+          - mediatek,mt8195-imp_iic_wrap_w
+          - mediatek,mt8195-mfgcfg
+          - mediatek,mt8195-vppsys0
+          - mediatek,mt8195-wpesys
+          - mediatek,mt8195-wpesys_vpp0
+          - mediatek,mt8195-wpesys_vpp1
+          - mediatek,mt8195-vppsys1
+          - mediatek,mt8195-imgsys
+          - mediatek,mt8195-imgsys1_dip_top
+          - mediatek,mt8195-imgsys1_dip_nr
+          - mediatek,mt8195-imgsys1_wpe
+          - mediatek,mt8195-ipesys
+          - mediatek,mt8195-camsys
+          - mediatek,mt8195-camsys_rawa
+          - mediatek,mt8195-camsys_yuva
+          - mediatek,mt8195-camsys_rawb
+          - mediatek,mt8195-camsys_yuvb
+          - mediatek,mt8195-camsys_mraw
+          - mediatek,mt8195-ccusys
+          - mediatek,mt8195-vdecsys_soc
+          - mediatek,mt8195-vdecsys
+          - mediatek,mt8195-vdecsys_core1
+          - mediatek,mt8195-vencsys
+          - mediatek,mt8195-vencsys_core1
+          - mediatek,mt8195-apusys_pll
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    scp_adsp: clock-controller@10720000 {
+        compatible = "mediatek,mt8195-scp_adsp";
+        reg = <0x10720000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_s: clock-controller@11d03000 {
+        compatible = "mediatek,mt8195-imp_iic_wrap_s";
+        reg = <0x11d03000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_w: clock-controller@11e05000 {
+        compatible = "mediatek,mt8195-imp_iic_wrap_w";
+        reg = <0x11e05000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    mfgcfg: clock-controller@13fbf000 {
+        compatible = "mediatek,mt8195-mfgcfg";
+        reg = <0x13fbf000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vppsys0: clock-controller@14000000 {
+        compatible = "mediatek,mt8195-vppsys0";
+        reg = <0x14000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    wpesys: clock-controller@14e00000 {
+        compatible = "mediatek,mt8195-wpesys";
+        reg = <0x14e00000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    wpesys_vpp0: clock-controller@14e02000 {
+        compatible = "mediatek,mt8195-wpesys_vpp0";
+        reg = <0x14e02000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    wpesys_vpp1: clock-controller@14e03000 {
+        compatible = "mediatek,mt8195-wpesys_vpp1";
+        reg = <0x14e03000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vppsys1: clock-controller@14f00000 {
+        compatible = "mediatek,mt8195-vppsys1";
+        reg = <0x14f00000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys: clock-controller@15000000 {
+        compatible = "mediatek,mt8195-imgsys";
+        reg = <0x15000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys1_dip_top: clock-controller@15110000 {
+        compatible = "mediatek,mt8195-imgsys1_dip_top";
+        reg = <0x15110000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys1_dip_nr: clock-controller@15130000 {
+        compatible = "mediatek,mt8195-imgsys1_dip_nr";
+        reg = <0x15130000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys1_wpe: clock-controller@15220000 {
+        compatible = "mediatek,mt8195-imgsys1_wpe";
+        reg = <0x15220000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    ipesys: clock-controller@15330000 {
+        compatible = "mediatek,mt8195-ipesys";
+        reg = <0x15330000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys: clock-controller@16000000 {
+        compatible = "mediatek,mt8195-camsys";
+        reg = <0x16000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_rawa: clock-controller@1604f000 {
+        compatible = "mediatek,mt8195-camsys_rawa";
+        reg = <0x1604f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_yuva: clock-controller@1606f000 {
+        compatible = "mediatek,mt8195-camsys_yuva";
+        reg = <0x1606f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_rawb: clock-controller@1608f000 {
+        compatible = "mediatek,mt8195-camsys_rawb";
+        reg = <0x1608f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_yuvb: clock-controller@160af000 {
+        compatible = "mediatek,mt8195-camsys_yuvb";
+        reg = <0x160af000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_mraw: clock-controller@16140000 {
+        compatible = "mediatek,mt8195-camsys_mraw";
+        reg = <0x16140000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    ccusys: clock-controller@17200000 {
+        compatible = "mediatek,mt8195-ccusys";
+        reg = <0x17200000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vdecsys_soc: clock-controller@1800f000 {
+        compatible = "mediatek,mt8195-vdecsys_soc";
+        reg = <0x1800f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vdecsys: clock-controller@1802f000 {
+        compatible = "mediatek,mt8195-vdecsys";
+        reg = <0x1802f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vdecsys_core1: clock-controller@1803f000 {
+        compatible = "mediatek,mt8195-vdecsys_core1";
+        reg = <0x1803f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vencsys: clock-controller@1a000000 {
+        compatible = "mediatek,mt8195-vencsys";
+        reg = <0x1a000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vencsys_core1: clock-controller@1b000000 {
+        compatible = "mediatek,mt8195-vencsys_core1";
+        reg = <0x1b000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    apusys_pll: clock-controller@190f3000 {
+        compatible = "mediatek,mt8195-apusys_pll";
+        reg = <0x190f3000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml
new file mode 100644
index 000000000000..95b6bdf99936
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-sys-clock.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek System Clock Controller for MT8195
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The clock architecture in Mediatek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
+  The infracfg_ao and pericfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8195-topckgen
+          - mediatek,mt8195-infracfg_ao
+          - mediatek,mt8195-apmixedsys
+          - mediatek,mt8195-pericfg_ao
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: syscon@10000000 {
+        compatible = "mediatek,mt8195-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    infracfg_ao: syscon@10001000 {
+        compatible = "mediatek,mt8195-infracfg_ao", "syscon";
+        reg = <0x10001000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    apmixedsys: syscon@1000c000 {
+        compatible = "mediatek,mt8195-apmixedsys", "syscon";
+        reg = <0x1000c000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    pericfg_ao: syscon@11003000 {
+        compatible = "mediatek,mt8195-pericfg_ao", "syscon";
+        reg = <0x11003000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
deleted file mode 100644
index ecf027a9003a..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Mediatek pericfg controller
-===========================
-
-The Mediatek pericfg controller provides various clocks and reset
-outputs to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-pericfg", "syscon"
-	- "mediatek,mt2712-pericfg", "syscon"
-	- "mediatek,mt7622-pericfg", "syscon"
-	- "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon"
-	- "mediatek,mt7629-pericfg", "syscon"
-	- "mediatek,mt8135-pericfg", "syscon"
-	- "mediatek,mt8173-pericfg", "syscon"
-	- "mediatek,mt8183-pericfg", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The pericfg controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-Also it uses the common reset controller binding from
-Documentation/devicetree/bindings/reset/reset.txt.
-The available reset outputs are defined in
-dt-bindings/reset/mt*-resets.h
-
-Example:
-
-pericfg: power-controller@10003000 {
-	compatible = "mediatek,mt8173-pericfg", "syscon";
-	reg = <0 0x10003000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
new file mode 100644
index 000000000000..ef62cbb13590
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Peripheral Configuration Controller
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description:
+  The Mediatek pericfg controller provides various clocks and reset outputs
+  to the system.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-pericfg
+              - mediatek,mt2712-pericfg
+              - mediatek,mt6765-pericfg
+              - mediatek,mt6795-pericfg
+              - mediatek,mt7622-pericfg
+              - mediatek,mt7629-pericfg
+              - mediatek,mt8135-pericfg
+              - mediatek,mt8173-pericfg
+              - mediatek,mt8183-pericfg
+              - mediatek,mt8186-pericfg
+              - mediatek,mt8195-pericfg
+              - mediatek,mt8516-pericfg
+          - const: syscon
+      - items:
+          # Special case for mt7623 for backward compatibility
+          - const: mediatek,mt7623-pericfg
+          - const: mediatek,mt2701-pericfg
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pericfg@10003000 {
+        compatible = "mediatek,mt8173-pericfg", "syscon";
+        reg = <0x10003000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+  - |
+    pericfg@10003000 {
+        compatible =  "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon";
+        reg = <0x10003000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
index 30cb645c0e54..29ca7a10b315 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
@@ -8,6 +8,8 @@ Required Properties:
 - compatible: Should be:
 	- "mediatek,mt7622-sgmiisys", "syscon"
 	- "mediatek,mt7629-sgmiisys", "syscon"
+	- "mediatek,mt7986-sgmiisys_0", "syscon"
+	- "mediatek,mt7986-sgmiisys_1", "syscon"
 - #clock-cells: Must be 1
 
 The SGMIISYS controller uses the common clk binding from
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
deleted file mode 100644
index 0293d693ce0c..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Mediatek topckgen controller
-============================
-
-The Mediatek topckgen controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-topckgen"
-	- "mediatek,mt2712-topckgen", "syscon"
-	- "mediatek,mt6779-topckgen", "syscon"
-	- "mediatek,mt6797-topckgen"
-	- "mediatek,mt7622-topckgen"
-	- "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
-	- "mediatek,mt7629-topckgen"
-	- "mediatek,mt8135-topckgen"
-	- "mediatek,mt8173-topckgen"
-	- "mediatek,mt8183-topckgen", "syscon"
-	- "mediatek,mt8516-topckgen"
-- #clock-cells: Must be 1
-
-The topckgen controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-topckgen: power-controller@10000000 {
-	compatible = "mediatek,mt8173-topckgen";
-	reg = <0 0x10000000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt
new file mode 100644
index 000000000000..c877bcc1a5c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt
@@ -0,0 +1,27 @@
+Mediatek vcodecsys controller
+============================
+
+The Mediatek vcodecsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt6765-vcodecsys", "syscon"
+- #clock-cells: Must be 1
+
+The vcodecsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+The vcodecsys controller also uses the common power domain from
+Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+The available power doamins are defined in dt-bindings/power/mt*-power.h.
+
+Example:
+
+venc_gcon: clock-controller@17000000 {
+	compatible = "mediatek,mt6765-vcodecsys", "syscon";
+	reg = <0 0x17000000 0 0x10000>;
+	power-domains = <&scpsys MT6765_POWER_DOMAIN_VCODEC>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
index 7894558b7a1c..98195169176a 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
@@ -11,6 +11,7 @@ Required Properties:
 	- "mediatek,mt6779-vdecsys", "syscon"
 	- "mediatek,mt6797-vdecsys", "syscon"
 	- "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon"
+	- "mediatek,mt8167-vdecsys", "syscon"
 	- "mediatek,mt8173-vdecsys", "syscon"
 	- "mediatek,mt8183-vdecsys", "syscon"
 - #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
new file mode 100644
index 000000000000..9a0d54e9799c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/microchip,sparx5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Boards
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |+
+   The Microchip Sparx5 SoC is a ARMv8-based used in a family of
+   gigabit TSN-capable gigabit switches.
+
+   The SparX-5 Ethernet switch family provides a rich set of switching
+   features such as advanced TCAM-based VLAN and QoS processing
+   enabling delivery of differentiated services, and security through
+   TCAM-based frame processing using versatile content aware processor
+   (VCAP)
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: The Sparx5 pcb125 board is a modular board,
+          which has both spi-nor and eMMC storage. The modular design
+          allows for connection of different network ports.
+        items:
+          - const: microchip,sparx5-pcb125
+          - const: microchip,sparx5
+
+      - description: The Sparx5 pcb134 is a pizzabox form factor
+          gigabit switch with 20 SFP ports. It features spi-nor and
+          either spi-nand or eMMC storage (mount option).
+        items:
+          - const: microchip,sparx5-pcb134
+          - const: microchip,sparx5
+
+      - description: The Sparx5 pcb135 is a pizzabox form factor
+          gigabit switch with 48+4 Cu ports. It features spi-nor and
+          either spi-nand or eMMC storage (mount option).
+        items:
+          - const: microchip,sparx5-pcb135
+          - const: microchip,sparx5
+
+  axi@600000000:
+    type: object
+    description: the root node in the Sparx5 platforms must contain
+      an axi bus child node. They are always at physical address
+      0x600000000 in all the Sparx5 variants.
+    properties:
+      compatible:
+        items:
+          - const: simple-bus
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - axi@600000000
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/moxart.yaml b/Documentation/devicetree/bindings/arm/moxart.yaml
index c068df59fad2..42565280914c 100644
--- a/Documentation/devicetree/bindings/arm/moxart.yaml
+++ b/Documentation/devicetree/bindings/arm/moxart.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/moxart.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MOXA ART device tree bindings
+title: MOXA ART
 
 maintainers:
   - Jonas Jensen <jonas.jensen@gmail.com>
@@ -16,4 +16,5 @@ properties:
       - const: moxa,moxart-uc-7112-lx
       - const: moxa,moxart
 
+additionalProperties: true
 ...
diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
index 818dfe6de512..d58116136154 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
+++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
@@ -28,8 +28,14 @@ properties:
         items:
           - enum:
               - mrvl,mmp2-brownstone
+              - olpc,xo-1.75
           - const: mrvl,mmp2
       - description: MMP3 based boards
         items:
-          - const: mrvl,mmp3
+          - enum:
+              - dell,wyse-ariel
+          - const: marvell,mmp3
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
index 6ce0b212ec6d..606b4b1b709d 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
@@ -81,4 +81,4 @@ Example:
 		};
 	};
 
-[1]. Documentation/devicetree/bindings/arm/idle-states.yaml
+[1]. Documentation/devicetree/bindings/cpu/idle-states.yaml
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
index 79902f470e4b..5ea506412b4e 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
@@ -22,7 +22,15 @@ properties:
   compatible:
     enum:
       - qcom,sc7180-llcc
+      - qcom,sc7280-llcc
+      - qcom,sc8180x-llcc
+      - qcom,sc8280xp-llcc
       - qcom,sdm845-llcc
+      - qcom,sm6350-llcc
+      - qcom,sm8150-llcc
+      - qcom,sm8250-llcc
+      - qcom,sm8350-llcc
+      - qcom,sm8450-llcc
 
   reg:
     items:
@@ -41,7 +49,8 @@ required:
   - compatible
   - reg
   - reg-names
-  - interrupts
+
+additionalProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
index ae4afc6dcfe0..c0e3c3a42bea 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
@@ -10,7 +10,7 @@ system, notifying them when a low power state is entered or exited.
 Multiple revisions of the SAW hardware are supported using these Device Nodes.
 SAW2 revisions differ in the register offset and configuration data. Also, the
 same revision of the SAW in different SoCs may have different configuration
-data due the the differences in hardware capabilities. Hence the SoC name, the
+data due the differences in hardware capabilities. Hence the SoC name, the
 version of the SAW hardware in that SoC and the distinction between cpu (big
 or Little) or cache, may be needed to uniquely identify the SAW register
 configuration and initialization data. The compatible string is used to
@@ -25,6 +25,7 @@ PROPERTIES
 			"qcom,saw2"
 		    A more specific value could be one of:
 			"qcom,apq8064-saw2-v1.1-cpu"
+			"qcom,msm8226-saw2-v2.1-cpu"
 			"qcom,msm8974-saw2-v2.1-cpu"
 			"qcom,apq8084-saw2-v2.1-cpu"
 
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml
new file mode 100644
index 000000000000..6816bd68f9cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 thingy.jp.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mstar/mstar,l3bridge.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MStar/SigmaStar Armv7 SoC l3bridge
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  MStar/SigmaStar's Armv7 SoCs have a pipeline in the interface
+  between the CPU and memory. This means that before DMA capable
+  devices are allowed to run the pipeline must be flushed to ensure
+  everything is in memory.
+
+  The l3bridge region contains registers that allow such a flush
+  to be triggered.
+
+  This node is used by the platform code to find where the registers
+  are and install a barrier that triggers the required pipeline flush.
+
+properties:
+  compatible:
+    items:
+      - const: mstar,l3bridge
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    l3bridge: l3bridge@1f204400 {
+        compatible = "mstar,l3bridge";
+        reg = <0x1f204400 0x200>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml
new file mode 100644
index 000000000000..599c65980f5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 thingy.jp.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mstar/mstar,smpctrl.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MStar/SigmaStar Armv7 SoC SMP control registers
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  MStar/SigmaStar's Armv7 SoCs that have more than one processor
+  have a region of registers that allow setting the boot address
+  and a magic number that allows secondary processors to leave
+  the loop they are parked in by the boot ROM.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sstar,ssd201-smpctrl # SSD201/SSD202D
+      - const: mstar,smpctrl
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    smpctrl@204000 {
+        compatible = "sstar,ssd201-smpctrl", "mstar,smpctrl";
+        reg = <0x204000 0x200>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
new file mode 100644
index 000000000000..8892eb6bd3ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mstar/mstar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar platforms device tree bindings
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: infinity boards
+        items:
+          - enum:
+              - thingyjp,breadbee-crust # thingy.jp BreadBee Crust
+          - const: mstar,infinity
+
+      - description: infinity2m boards
+        items:
+          - enum:
+              - 100ask,dongshanpione # 100ask DongShanPiOne
+              - honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit
+              - m5stack,unitv2 # M5Stack UnitV2
+              - miyoo,miyoo-mini # Miyoo Mini
+              - wirelesstag,ido-som2d01 # Wireless Tag IDO-SOM2D01
+              - wirelesstag,ido-sbc2d06-v1b-22w # Wireless Tag IDO-SBC2D06-1VB-22W
+          - const: mstar,infinity2m
+
+      - description: infinity3 boards
+        items:
+          - enum:
+              - thingyjp,breadbee # thingy.jp BreadBee
+          - const: mstar,infinity3
+
+      - description: mercury5 boards
+        items:
+          - enum:
+              - 70mai,midrived08 # 70mai midrive d08
+          - const: mstar,mercury5
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.txt b/Documentation/devicetree/bindings/arm/npcm/npcm.txt
deleted file mode 100644
index 2d87d9ecea85..000000000000
--- a/Documentation/devicetree/bindings/arm/npcm/npcm.txt
+++ /dev/null
@@ -1,6 +0,0 @@
-NPCM Platforms Device Tree Bindings
------------------------------------
-NPCM750 SoC
-Required root node properties:
-	- compatible = "nuvoton,npcm750";
-
diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
new file mode 100644
index 000000000000..43409e5721d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/npcm/npcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NPCM Platforms Device Tree Bindings
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: WPCM450 based boards
+        items:
+          - enum:
+              - supermicro,x9sci-ln4f-bmc   # Supermicro X9SCI-LN4F server's BMC
+          - const: nuvoton,wpcm450
+
+      - description: NPCM750 based boards
+        items:
+          - enum:
+              - nuvoton,npcm750-evb         # NPCM750 evaluation board
+          - const: nuvoton,npcm750
+
+      - description: NPCM845 based boards
+        items:
+          - enum:
+              - nuvoton,npcm845-evb         # NPCM845 evaluation board
+          - const: nuvoton,npcm845
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
new file mode 100644
index 000000000000..94e72f25b331
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/npcm/nuvoton,gcr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Global Control Registers block in Nuvoton SoCs
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description:
+  The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs
+  that expose misc functionality such as chip model and version information or
+  pinmux settings.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nuvoton,wpcm450-gcr
+          - nuvoton,npcm750-gcr
+          - nuvoton,npcm845-gcr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    gcr: syscon@800000 {
+      compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd";
+      reg = <0x800000 0x1000>;
+
+      mux-controller {
+        compatible = "mmio-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks = <0x38 0x07>;
+        idle-states = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
new file mode 100644
index 000000000000..b6f57d79a753
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/nvidia,tegra194-ccplex.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra194 CPU Complex
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+  - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+  Tegra194 SOC has homogeneous architecture where each cluster has two
+  symmetric cores. Compatible string in "cpus" node represents the CPU
+  Complex having all clusters.
+
+properties:
+  $nodename:
+    const: cpus
+
+  compatible:
+    enum:
+      - nvidia,tegra194-ccplex
+
+  nvidia,bpmp:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: |
+      Specifies the bpmp node that needs to be queried to get
+      operating point data for all CPUs.
+
+additionalProperties: true
+
+examples:
+  - |
+    cpus {
+      compatible = "nvidia,tegra194-ccplex";
+      nvidia,bpmp = <&bpmp>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cpu0_0: cpu@0 {
+        compatible = "nvidia,tegra194-carmel";
+        device_type = "cpu";
+        reg = <0x0>;
+        enable-method = "psci";
+      };
+
+      cpu0_1: cpu@1 {
+        compatible = "nvidia,tegra194-carmel";
+        device_type = "cpu";
+        reg = <0x001>;
+        enable-method = "psci";
+      };
+
+      cpu1_0: cpu@100 {
+        compatible = "nvidia,tegra194-carmel";
+        device_type = "cpu";
+        reg = <0x100>;
+        enable-method = "psci";
+      };
+
+      cpu1_1: cpu@101 {
+        compatible = "nvidia,tegra194-carmel";
+        device_type = "cpu";
+        reg = <0x101>;
+        enable-method = "psci";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
index 07f39d3eee7e..214c97bc3063 100644
--- a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
+++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
@@ -17,9 +17,10 @@ properties:
           - nxp,lpc3230
           - nxp,lpc3240
       - items:
-        - enum:
-            - ea,ea3250
-            - phytec,phy3250
-        - const: nxp,lpc3250
+          - enum:
+              - ea,ea3250
+              - phytec,phy3250
+          - const: nxp,lpc3250
 
+additionalProperties: true
 ...
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c..fa8b31660cad 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@ Boards (incomplete list of examples):
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+  compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index 3eb6d7afff14..431ef8c56a13 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -31,12 +31,17 @@ Required properties:
 		(base address and length)
 - clocks:	clocks for this module
 - clockdomains:	clockdomains for this module
+- #clock-cells: From common clock binding
+- clock-output-names: From common clock binding
+
 
 Example:
 
-cm: cm@48004000 {
+cm: clock@48004000 {
 	compatible = "ti,omap3-cm";
 	reg = <0x48004000 0x4000>;
+	#clock-cells = <0>;
+	clock-output-names = "cm";
 
 	cm_clocks: clocks {
 		#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
index fcd3456afbbe..42db138e091a 100644
--- a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
@@ -18,6 +18,7 @@ Required properties:
 		(base address and length)
 
 Optional properties:
+- #power-domain-cells:	Should be 0 if the instance is a power domain provider.
 - #reset-cells:	Should be 1 if the PRM instance in question supports resets.
 
 Example:
@@ -25,5 +26,6 @@ Example:
 prm_dsp2: prm@1b00 {
 	compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
 	reg = <0x1b00 0x40>;
+	#power-domain-cells = <0>;
 	#reset-cells = <1>;
 };
diff --git a/Documentation/devicetree/bindings/arm/picoxcell.txt b/Documentation/devicetree/bindings/arm/picoxcell.txt
deleted file mode 100644
index e75c0ef51e69..000000000000
--- a/Documentation/devicetree/bindings/arm/picoxcell.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Picochip picoXcell device tree bindings.
-========================================
-
-Required root node properties:
-    - compatible:
-	- "picochip,pc7302-pc3x3" : PC7302 development board with PC3X3 device.
-	- "picochip,pc7302-pc3x2" : PC7302 development board with PC3X2 device.
-	- "picochip,pc3x3" : picoXcell PC3X3 device based board.
-	- "picochip,pc3x2" : picoXcell PC3X2 device based board.
-
-Timers required properties:
-    - compatible = "picochip,pc3x2-timer"
-    - interrupts : The single IRQ line for the timer.
-    - clock-freq : The frequency in HZ of the timer.
-    - reg : The register bank for the timer.
-
-Note: two timers are required - one for the scheduler clock and one for the
-event tick/NOHZ.
-
-VIC required properties:
-    - compatible = "arm,pl192-vic".
-    - interrupt-controller.
-    - reg : The register bank for the device.
-    - #interrupt-cells : Must be 1.
diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml
index 52ae094ce330..dbb6f3dc5ae5 100644
--- a/Documentation/devicetree/bindings/arm/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/pmu.yaml
@@ -20,27 +20,47 @@ properties:
     items:
       - enum:
           - apm,potenza-pmu
-          - arm,armv8-pmuv3
-          - arm,cortex-a73-pmu
-          - arm,cortex-a72-pmu
-          - arm,cortex-a57-pmu
-          - arm,cortex-a53-pmu
-          - arm,cortex-a35-pmu
-          - arm,cortex-a17-pmu
-          - arm,cortex-a15-pmu
-          - arm,cortex-a12-pmu
-          - arm,cortex-a9-pmu
-          - arm,cortex-a8-pmu
-          - arm,cortex-a7-pmu
-          - arm,cortex-a5-pmu
-          - arm,arm11mpcore-pmu
-          - arm,arm1176-pmu
+          - apple,firestorm-pmu
+          - apple,icestorm-pmu
+          - arm,armv8-pmuv3 # Only for s/w models
           - arm,arm1136-pmu
+          - arm,arm1176-pmu
+          - arm,arm11mpcore-pmu
+          - arm,cortex-a5-pmu
+          - arm,cortex-a7-pmu
+          - arm,cortex-a8-pmu
+          - arm,cortex-a9-pmu
+          - arm,cortex-a12-pmu
+          - arm,cortex-a15-pmu
+          - arm,cortex-a17-pmu
+          - arm,cortex-a32-pmu
+          - arm,cortex-a34-pmu
+          - arm,cortex-a35-pmu
+          - arm,cortex-a53-pmu
+          - arm,cortex-a55-pmu
+          - arm,cortex-a57-pmu
+          - arm,cortex-a65-pmu
+          - arm,cortex-a72-pmu
+          - arm,cortex-a73-pmu
+          - arm,cortex-a75-pmu
+          - arm,cortex-a76-pmu
+          - arm,cortex-a77-pmu
+          - arm,cortex-a78-pmu
+          - arm,cortex-a510-pmu
+          - arm,cortex-a710-pmu
+          - arm,cortex-x1-pmu
+          - arm,cortex-x2-pmu
+          - arm,neoverse-e1-pmu
+          - arm,neoverse-n1-pmu
+          - arm,neoverse-n2-pmu
+          - arm,neoverse-v1-pmu
           - brcm,vulcan-pmu
           - cavium,thunder-pmu
+          - nvidia,denver-pmu
+          - nvidia,carmel-pmu
+          - qcom,krait-pmu
           - qcom,scorpion-pmu
           - qcom,scorpion-mp-pmu
-          - qcom,krait-pmu
 
   interrupts:
     # Don't know how many CPUs, so no constraints to specify
@@ -48,6 +68,8 @@ properties:
 
   interrupt-affinity:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       When using SPIs, specifies a list of phandles to CPU
       nodes corresponding directly to the affinity of
@@ -84,4 +106,6 @@ properties:
 required:
   - compatible
 
+additionalProperties: false
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/primecell.yaml b/Documentation/devicetree/bindings/arm/primecell.yaml
index 5aae37f1c563..e15fe00aafb2 100644
--- a/Documentation/devicetree/bindings/arm/primecell.yaml
+++ b/Documentation/devicetree/bindings/arm/primecell.yaml
@@ -33,4 +33,7 @@ properties:
     contains:
       const: apb_pclk
     additionalItems: true
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
index 5e66934455bb..3a2c908ff282 100644
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -32,6 +32,9 @@ description: |+
     http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf
 
 properties:
+  $nodename:
+    const: psci
+
   compatible:
     oneOf:
       - description:
@@ -40,39 +43,32 @@ properties:
 
       - description:
           For implementations complying to PSCI 0.2.
-        const: arm,psci-0.2
-
-      - description:
-          For implementations complying to PSCI 0.2.
           Function IDs are not required and should be ignored by an OS with
           PSCI 0.2 support, but are permitted to be present for compatibility
           with existing software when "arm,psci" is later in the compatible
           list.
+        minItems: 1
         items:
           - const: arm,psci-0.2
           - const: arm,psci
 
       - description:
           For implementations complying to PSCI 1.0.
-        const: arm,psci-1.0
-
-      - description:
-          For implementations complying to PSCI 1.0.
           PSCI 1.0 is backward compatible with PSCI 0.2 with minor
           specification updates, as defined in the PSCI specification[2].
+        minItems: 1
         items:
           - const: arm,psci-1.0
           - const: arm,psci-0.2
+          - const: arm,psci
 
   method:
     description: The method of calling the PSCI firmware.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - enum:
-          # SMC #0, with the register assignments specified in this binding.
-          - smc
-          # HVC #0, with the register assignments specified in this binding.
-          - hvc
+    $ref: /schemas/types.yaml#/definitions/string-array
+    enum:
+      - smc
+      # HVC #0, with the register assignments specified in this binding.
+      - hvc
 
   cpu_suspend:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -100,12 +96,12 @@ properties:
       bindings in [1]) must specify this property.
 
       [1] Kernel documentation - ARM idle states bindings
-        Documentation/devicetree/bindings/arm/idle-states.yaml
+        Documentation/devicetree/bindings/cpu/idle-states.yaml
 
 patternProperties:
   "^power-domain-":
-    allOf:
-      - $ref: "../power/power-domain.yaml#"
+    $ref: "../power/power-domain.yaml#"
+
     type: object
     description: |
       ARM systems can have multiple cores, sometimes in an hierarchical
@@ -141,6 +137,8 @@ allOf:
         - cpu_off
         - cpu_on
 
+additionalProperties: false
+
 examples:
   - |+
 
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 5976c0b16b65..1b5ac6b02bc5 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/arm/qcom.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: QCOM device tree bindings
+title: QCOM
 
 maintainers:
-  - Stephen Boyd <sboyd@codeaurora.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
   Some qcom based bootloaders identify the dtb blob based on a set of
@@ -25,24 +25,52 @@ description: |
   The 'SoC' element must be one of the following strings:
 
         apq8016
+        apq8026
         apq8074
         apq8084
         apq8096
+        ipq6018
         ipq8074
         mdm9615
+        msm8226
         msm8916
         msm8974
         msm8992
         msm8994
         msm8996
+        msm8998
+        qcs404
+        sa8155p
+        sa8540p
         sc7180
+        sc7280
+        sc8180x
+        sc8280xp
+        sda660
+        sdm630
+        sdm632
+        sdm636
+        sdm660
         sdm845
+        sdx55
+        sdx65
+        sm6125
+        sm6350
+        sm7225
+        sm8150
+        sm8250
+        sm8350
+        sm8450
 
   The 'board' element must be one of the following strings:
 
+        adp
         cdp
+        cp01-c1
         dragonboard
         hk01
+        hk10-c1
+        hk10-c2
         idp
         liquid
         mtp
@@ -68,7 +96,14 @@ description: |
   A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in
   foundry 2.
 
+  There are many devices in the list below that run the standard ChromeOS
+  bootloader setup and use the open source depthcharge bootloader to boot the
+  OS. These devices do not use the scheme described above. For details, see:
+  https://docs.kernel.org/arm/google/chromebook-boot-flow.html
+
 properties:
+  $nodename:
+    const: "/"
   compatible:
     oneOf:
       - items:
@@ -78,6 +113,15 @@ properties:
 
       - items:
           - enum:
+              - asus,sparrow
+              - lg,lenok
+          - const: qcom,apq8026
+
+      - items:
+          - enum:
+              - asus,nexus7-flo
+              - lg,nexus4-mako
+              - sony,xperia-yuga
               - qcom,apq8064-cm-qs600
               - qcom,apq8064-ifc6410
           - const: qcom,apq8064
@@ -101,6 +145,11 @@ properties:
 
       - items:
           - enum:
+              - samsung,s3ve3g
+          - const: qcom,msm8226
+
+      - items:
+          - enum:
               - qcom,msm8960-cdp
           - const: qcom,msm8960
 
@@ -108,28 +157,96 @@ properties:
           - enum:
               - fairphone,fp2
               - lge,hammerhead
+              - samsung,klte
               - sony,xperia-amami
               - sony,xperia-castor
               - sony,xperia-honami
           - const: qcom,msm8974
 
       - items:
-          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916-mtp
+          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916
 
       - items:
           - enum:
-              - longcheer,l8150
+              - alcatel,idol347
+              - asus,z00l
+              - huawei,g7
+              - longcheer,l8910
               - samsung,a3u-eur
               - samsung,a5u-eur
+              - samsung,e5
+              - samsung,e7
+              - samsung,grandmax
+              - samsung,j5
+              - samsung,serranove
+              - wingtech,wt88047
+          - const: qcom,msm8916
+
+      - items:
+          - const: longcheer,l8150
+          - const: qcom,msm8916-v1-qrd/9-v1
           - const: qcom,msm8916
 
       - items:
-          - const: qcom,msm8996-mtp
+          - enum:
+              - lg,bullhead
+              - microsoft,talkman
+              - xiaomi,libra
+          - const: qcom,msm8992
+
+      - items:
+          - enum:
+              - sony,karin_windy
+          - const: qcom,apq8094
+
+      - items:
+          - enum:
+              - huawei,angler
+              - microsoft,cityman
+              - sony,ivy-row
+              - sony,karin-row
+              - sony,satsuki-row
+              - sony,sumire-row
+              - sony,suzuran-row
+          - const: qcom,msm8994
+
+      - items:
+          - enum:
+              - arrow,apq8096-db820c
+              - inforce,ifc6640
+          - const: qcom,apq8096-sbc
+          - const: qcom,apq8096
+
+      - items:
+          - enum:
+              - qcom,msm8996-mtp
+              - sony,dora-row
+              - sony,kagura-row
+              - sony,keyaki-row
+              - xiaomi,gemini
+              - xiaomi,natrium
+              - xiaomi,scorpio
+          - const: qcom,msm8996
+
+      - items:
+          - enum:
+              - asus,novago-tp370ql
+              - fxtec,pro1
+              - hp,envy-x2
+              - lenovo,miix-630
+              - oneplus,cheeseburger
+              - oneplus,dumpling
+              - qcom,msm8998-mtp
+              - sony,xperia-lilac
+              - sony,xperia-maple
+              - sony,xperia-poplar
+          - const: qcom,msm8998
 
       - items:
           - enum:
+              - qcom,ipq4019-ap-dk01.1-c1
               - qcom,ipq4019-ap-dk04.1-c3
               - qcom,ipq4019-ap-dk07.1-c1
               - qcom,ipq4019-ap-dk07.1-c2
@@ -144,10 +261,484 @@ properties:
       - items:
           - enum:
               - qcom,ipq8074-hk01
+              - qcom,ipq8074-hk10-c1
+              - qcom,ipq8074-hk10-c2
           - const: qcom,ipq8074
 
-      - items:
+      - description: Qualcomm Technologies, Inc. SC7180 IDP
+        items:
           - enum:
               - qcom,sc7180-idp
           - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c (rev1 - 2)
+        items:
+          - const: google,coachz-rev1
+          - const: google,coachz-rev2
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c (newest rev)
+        items:
+          - const: google,coachz
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c with LTE (rev1 - 2)
+        items:
+          - const: google,coachz-rev1-sku0
+          - const: google,coachz-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c with LTE (newest rev)
+        items:
+          - const: google,coachz-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (rev2)
+        items:
+          - const: google,homestar-rev2
+          - const: google,homestar-rev23
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (rev3)
+        items:
+          - const: google,homestar-rev3
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (newest rev)
+        items:
+          - const: google,homestar
+          - const: qcom,sc7180
+
+      - description: Google Kingoftown (rev0)
+        items:
+          - const: google,kingoftown-rev0
+          - const: qcom,sc7180
+
+      - description: Google Kingoftown (newest rev)
+        items:
+          - const: google,kingoftown
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev0)
+        items:
+          - const: google,lazor-rev0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev1 - 2)
+        items:
+          - const: google,lazor-rev1
+          - const: google,lazor-rev2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev3 - 8)
+        items:
+          - const: google,lazor-rev3
+          - const: google,lazor-rev4
+          - const: google,lazor-rev5
+          - const: google,lazor-rev6
+          - const: google,lazor-rev7
+          - const: google,lazor-rev8
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (newest rev)
+        items:
+          - const: google,lazor
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (rev1 - 2)
+        items:
+          - const: google,lazor-rev1-sku2
+          - const: google,lazor-rev2-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (rev3 - 8)
+        items:
+          - const: google,lazor-rev3-sku2
+          - const: google,lazor-rev4-sku2
+          - const: google,lazor-rev5-sku2
+          - const: google,lazor-rev6-sku2
+          - const: google,lazor-rev7-sku2
+          - const: google,lazor-rev8-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (newest rev)
+        items:
+          - const: google,lazor-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (rev1 - 2)
+        items:
+          - const: google,lazor-rev1-sku0
+          - const: google,lazor-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (rev3 - 8)
+        items:
+          - const: google,lazor-rev3-sku0
+          - const: google,lazor-rev4-sku0
+          - const: google,lazor-rev5-sku0
+          - const: google,lazor-rev6-sku0
+          - const: google,lazor-rev7-sku0
+          - const: google,lazor-rev8-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (newest rev)
+        items:
+          - const: google,lazor-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 (rev4 - rev8)
+        items:
+          - const: google,lazor-rev4-sku4
+          - const: google,lazor-rev5-sku4
+          - const: google,lazor-rev6-sku4
+          - const: google,lazor-rev7-sku4
+          - const: google,lazor-rev8-sku4
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 (newest rev)
+        items:
+          - const: google,lazor-sku4
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (rev4)
+        items:
+          - const: google,lazor-rev4-sku5
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (rev5 - rev8)
+        items:
+          - const: google,lazor-rev5-sku5
+          - const: google,lazor-rev5-sku6
+          - const: google,lazor-rev6-sku6
+          - const: google,lazor-rev7-sku6
+          - const: google,lazor-rev8-sku6
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (newest rev)
+        items:
+          - const: google,lazor-sku6
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with AUO panel (rev0)
+        items:
+          - const: google,mrbland-rev0-sku0
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with AUO panel (newest rev)
+        items:
+          - const: google,mrbland-sku1536
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with BOE panel (rev0)
+        items:
+          - const: google,mrbland-rev0-sku16
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with BOE panel (newest rev)
+        items:
+          - const: google,mrbland-sku1024
+          - const: google,mrbland-sku768
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with Parade (newest rev)
+        items:
+          - const: google,pazquel-sku5
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with TI (newest rev)
+        items:
+          - const: google,pazquel-sku1
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with LTE and Parade (newest rev)
+        items:
+          - const: google,pazquel-sku6
+          - const: google,pazquel-sku4
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with LTE and TI (newest rev)
+        items:
+          - const: google,pazquel-sku0
+          - const: google,pazquel-sku2
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (rev1)
+        items:
+          - const: google,pompom-rev1
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (rev2)
+        items:
+          - const: google,pompom-rev2
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (newest rev)
+        items:
+          - const: google,pompom
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (rev1)
+        items:
+          - const: google,pompom-rev1-sku0
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (rev2)
+        items:
+          - const: google,pompom-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (newest rev)
+        items:
+          - const: google,pompom-sku0
+          - const: qcom,sc7180
+
+      - description: Google Quackingstick (newest rev)
+        items:
+          - const: google,quackingstick-sku1537
+          - const: qcom,sc7180
+
+      - description: Google Quackingstick with LTE (newest rev)
+        items:
+          - const: google,quackingstick-sku1536
+          - const: qcom,sc7180
+
+      - description: Google Trogdor (newest rev)
+        items:
+          - const: google,trogdor
+          - const: qcom,sc7180
+
+      - description: Google Trogdor with LTE (newest rev)
+        items:
+          - const: google,trogdor-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (rev0)
+        items:
+          - const: google,wormdingler-rev0-sku16
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (newest rev)
+        items:
+          - const: google,wormdingler-sku1024
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel and rt5682s (newest rev)
+        items:
+          - const: google,wormdingler-sku1025
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (rev0)
+        items:
+          - const: google,wormdingler-rev0-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (newest rev)
+        items:
+          - const: google,wormdingler-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel and rt5682s (newest rev)
+        items:
+          - const: google,wormdingler-sku1
+          - const: qcom,sc7180
+
+      - description: Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)
+        items:
+          - const: qcom,sc7280-crd
+          - const: google,hoglin-rev3
+          - const: google,hoglin-rev4
+          - const: google,piglin-rev3
+          - const: google,piglin-rev4
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 CRD platform (newest rev)
+        items:
+          - const: google,zoglin
+          - const: google,hoglin
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform
+        items:
+          - const: qcom,sc7280-idp
+          - const: google,senor
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform
+        items:
+          - const: qcom,sc7280-idp2
+          - const: google,piglin
+          - const: qcom,sc7280
+
+      - description: Google Evoker (newest rev)
+        items:
+          - const: google,evoker
+          - const: qcom,sc7280
+
+      - description: Google Herobrine (newest rev)
+        items:
+          - const: google,herobrine
+          - const: qcom,sc7280
+
+      - description: Google Villager (rev0)
+        items:
+          - const: google,villager-rev0
+          - const: qcom,sc7280
+
+      - description: Google Villager (newest rev)
+        items:
+          - const: google,villager
+          - const: qcom,sc7280
+
+      - description: Google Villager with LTE (newest rev)
+        items:
+          - const: google,villager-sku512
+          - const: qcom,sc7280
+
+      - items:
+          - enum:
+              - lenovo,flex-5g
+              - microsoft,surface-prox
+              - qcom,sc8180x-primus
+          - const: qcom,sc8180x
+
+      - items:
+          - enum:
+              - lenovo,thinkpad-x13s
+              - qcom,sc8280xp-crd
+              - qcom,sc8280xp-qrd
+          - const: qcom,sc8280xp
+
+      - items:
+          - enum:
+              - sony,discovery-row
+              - sony,kirin-row
+              - sony,pioneer-row
+              - sony,voyager-row
+          - const: qcom,sdm630
+
+      - items:
+          - enum:
+              - inforce,ifc6560
+          - const: qcom,sda660
+
+      - items:
+          - enum:
+              - fairphone,fp3
+          - const: qcom,sdm632
+
+      - items:
+          - enum:
+              - sony,mermaid-row
+          - const: qcom,sdm636
+
+      - items:
+          - enum:
+              - xiaomi,lavender
+          - const: qcom,sdm660
+
+      - items:
+          - enum:
+              - qcom,sdx55-mtp
+              - qcom,sdx55-telit-fn980-tlb
+              - qcom,sdx55-t55
+          - const: qcom,sdx55
+
+      - items:
+          - enum:
+              - qcom,sdx65-mtp
+          - const: qcom,sdx65
+
+      - items:
+          - enum:
+              - qcom,ipq6018-cp01
+              - qcom,ipq6018-cp01-c1
+          - const: qcom,ipq6018
+
+      - items:
+          - enum:
+              - qcom,qcs404-evb-1000
+              - qcom,qcs404-evb-4000
+          - const: qcom,qcs404-evb
+          - const: qcom,qcs404
+
+      - items:
+          - enum:
+              - qcom,sa8155p-adp
+          - const: qcom,sa8155p
+
+      - items:
+          - enum:
+              - qcom,sa8295p-adp
+          - const: qcom,sa8540p
+
+      - items:
+          - enum:
+              - lenovo,yoga-c630
+              - lg,judyln
+              - lg,judyp
+              - oneplus,enchilada
+              - oneplus,fajita
+              - qcom,sdm845-mtp
+              - shift,axolotl
+              - samsung,w737
+              - sony,akari-row
+              - sony,akatsuki-row
+              - sony,apollo-row
+              - thundercomm,db845c
+              - xiaomi,beryllium
+              - xiaomi,polaris
+          - const: qcom,sdm845
+
+      - items:
+          - enum:
+              - sony,pdx201
+          - const: qcom,sm6125
+
+      - items:
+          - enum:
+              - sony,pdx213
+          - const: qcom,sm6350
+
+      - items:
+          - enum:
+              - fairphone,fp4
+          - const: qcom,sm7225
+
+      - items:
+          - enum:
+              - microsoft,surface-duo
+              - qcom,sm8150-hdk
+              - qcom,sm8150-mtp
+              - sony,bahamut-generic
+              - sony,griffin-generic
+          - const: qcom,sm8150
+
+      - items:
+          - enum:
+              - qcom,qrb5165-rb5
+              - qcom,sm8250-hdk
+              - qcom,sm8250-mtp
+              - sony,pdx203-generic
+              - sony,pdx206-generic
+          - const: qcom,sm8250
+
+      - items:
+          - enum:
+              - microsoft,surface-duo2
+              - qcom,sm8350-hdk
+              - qcom,sm8350-mtp
+              - sony,pdx214-generic
+              - sony,pdx215-generic
+          - const: qcom,sm8350
+
+      - items:
+          - enum:
+              - qcom,sm8450-hdk
+              - qcom,sm8450-qrd
+              - sony,pdx223
+          - const: qcom,sm8450
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/rda.yaml b/Documentation/devicetree/bindings/arm/rda.yaml
index 51cec2b63b04..09241ea1d228 100644
--- a/Documentation/devicetree/bindings/arm/rda.yaml
+++ b/Documentation/devicetree/bindings/arm/rda.yaml
@@ -4,12 +4,14 @@
 $id: http://devicetree.org/schemas/arm/rda.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: RDA Micro platforms device tree bindings
+title: RDA Micro platforms
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     items:
       - enum:
@@ -17,4 +19,6 @@ properties:
           - xunlong,orangepi-i96        # Orange Pi i96
       - const: rda,8810pl
 
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/realtek.yaml b/Documentation/devicetree/bindings/arm/realtek.yaml
index ab59de17152d..ddd9a85099e9 100644
--- a/Documentation/devicetree/bindings/arm/realtek.yaml
+++ b/Documentation/devicetree/bindings/arm/realtek.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/realtek.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Realtek platforms device tree bindings
+title: Realtek platforms
 
 maintainers:
   - Andreas Färber <afaerber@suse.de>
@@ -14,6 +14,13 @@ properties:
     const: '/'
   compatible:
     oneOf:
+      # RTD1195 SoC based boards
+      - items:
+          - enum:
+              - mele,x1000 # MeLE X1000
+              - realtek,horseradish # Realtek Horseradish EVB
+          - const: realtek,rtd1195
+
       # RTD1293 SoC based boards
       - items:
           - enum:
@@ -25,6 +32,7 @@ properties:
           - enum:
               - mele,v9 # MeLE V9
               - probox2,ava # ProBox2 AVA
+              - xnano,x5 # Xnano X5
               - zidoo,x9s # Zidoo X9S
           - const: realtek,rtd1295
 
@@ -33,4 +41,20 @@ properties:
           - enum:
               - synology,ds418 # Synology DiskStation DS418
           - const: realtek,rtd1296
+
+      # RTD1395 SoC based boards
+      - items:
+          - enum:
+              - bananapi,bpi-m4 # Banana Pi BPI-M4
+              - realtek,lion-skin # Realtek Lion Skin EVB
+          - const: realtek,rtd1395
+
+      # RTD1619 SoC based boards
+      - items:
+          - enum:
+              - realtek,mjolnir # Realtek Mjolnir EVB
+          - const: realtek,rtd1619
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index 9436124c5809..f51464a08aff 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/renesas.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
+title: Renesas SH-Mobile, R-Mobile, and R-Car Platform
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
@@ -54,6 +54,16 @@ properties:
 
       - description: RZ/G1H (R8A77420)
         items:
+          - enum:
+              # iWave Systems RZ/G1H Qseven System On Module (iW-RainboW-G21M-Qseven)
+              - iwave,g21m
+          - const: renesas,r8a7742
+
+      - items:
+          - enum:
+              # iWave Systems RZ/G1H Qseven Development Platform (iW-RainboW-G21D-Qseven)
+              - iwave,g21d
+          - const: iwave,g21m
           - const: renesas,r8a7742
 
       - description: RZ/G1M (R8A77430)
@@ -108,6 +118,7 @@ properties:
         items:
           - enum:
               - hoperun,hihope-rzg2m # HopeRun HiHope RZ/G2M platform
+              - beacon,beacon-rzg2m # Beacon EmbeddedWorks RZ/G2M Kit
           - const: renesas,r8a774a1
 
       - items:
@@ -119,6 +130,7 @@ properties:
       - description: RZ/G2N (R8A774B1)
         items:
           - enum:
+              - beacon,beacon-rzg2n # Beacon EmbeddedWorks RZ/G2N Kit
               - hoperun,hihope-rzg2n # HopeRun HiHope RZ/G2N platform
           - const: renesas,r8a774b1
 
@@ -140,6 +152,19 @@ properties:
           - const: si-linux,cat874
           - const: renesas,r8a774c0
 
+      - description: RZ/G2H (R8A774E1)
+        items:
+          - enum:
+              - beacon,beacon-rzg2h # Beacon EmbeddedWorks RZ/G2H Kit
+              - hoperun,hihope-rzg2h # HopeRun HiHope RZ/G2H platform
+          - const: renesas,r8a774e1
+
+      - items:
+          - enum:
+              - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
+          - const: hoperun,hihope-rzg2h
+          - const: renesas,r8a774e1
+
       - description: R-Car M1A (R8A77781)
         items:
           - enum:
@@ -208,20 +233,42 @@ properties:
       - description: R-Car M3-W+ (R8A77961)
         items:
           - enum:
+              - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP8J77961ASKB0SK0SA05A (M3 ES3.0))
               - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012SA5A)
           - const: renesas,r8a77961
 
       - description: Kingfisher (SBEV-RCAR-KF-M03)
-        items:
-          - const: shimafuji,kingfisher
-          - enum:
-              - renesas,h3ulcb
-              - renesas,m3ulcb
-              - renesas,m3nulcb
-          - enum:
-              - renesas,r8a7795
-              - renesas,r8a7796
-              - renesas,r8a77965
+        oneOf:
+          - items:
+              - const: shimafuji,kingfisher
+              - enum:
+                  - renesas,h3ulcb
+                  - renesas,m3ulcb
+                  - renesas,m3nulcb
+              - enum:
+                  - renesas,r8a7795
+                  - renesas,r8a7796
+                  - renesas,r8a77961
+                  - renesas,r8a77965
+          - items:
+              - const: shimafuji,kingfisher
+              - enum:
+                  - renesas,h3ulcb
+                  - renesas,m3ulcb
+                  - renesas,m3nulcb
+              - enum:
+                  - renesas,r8a779m0
+                  - renesas,r8a779m1
+                  - renesas,r8a779m2
+                  - renesas,r8a779m3
+                  - renesas,r8a779m4
+                  - renesas,r8a779m5
+                  - renesas,r8a779m8
+                  - renesas,r8a779mb
+              - enum:
+                  - renesas,r8a7795
+                  - renesas,r8a77961
+                  - renesas,r8a77965
 
       - description: R-Car M3-N (R8A77965)
         items:
@@ -245,6 +292,13 @@ properties:
               - renesas,v3hsk # V3HSK (Y-ASK-RCAR-V3H-WS10)
           - const: renesas,r8a77980
 
+      - description: R-Car V3H2 (R8A77980A)
+        items:
+          - enum:
+              - renesas,condor-i # Condor-I (RTP0RC77980SEBS012SA01)
+          - const: renesas,r8a77980a
+          - const: renesas,r8a77980
+
       - description: R-Car E3 (R8A77990)
         items:
           - enum:
@@ -257,10 +311,161 @@ properties:
               - renesas,draak # Draak (RTP0RC77995SEB0010S)
           - const: renesas,r8a77995
 
+      - description: R-Car V3U (R8A779A0)
+        items:
+          - enum:
+              - renesas,falcon-cpu # Falcon CPU board (RTP0RC779A0CPB0010S)
+          - const: renesas,r8a779a0
+
+      - items:
+          - enum:
+              - renesas,falcon-breakout # Falcon BreakOut board (RTP0RC779A0BOB0010S)
+          - const: renesas,falcon-cpu
+          - const: renesas,r8a779a0
+
+      - description: R-Car S4-8 (R8A779F0)
+        items:
+          - enum:
+              - renesas,spider-cpu # Spider CPU board (RTP8A779F0ASKB0SC2S)
+          - const: renesas,r8a779f0
+
+      - items:
+          - enum:
+              - renesas,spider-breakout # Spider BreakOut board (RTP8A779F0ASKB0SB0S)
+          - const: renesas,spider-cpu
+          - const: renesas,r8a779f0
+
+      - description: R-Car V4H (R8A779G0)
+        items:
+          - enum:
+              - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000)
+          - const: renesas,r8a779g0
+
+      - items:
+          - enum:
+              - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000)
+          - const: renesas,white-hawk-cpu
+          - const: renesas,r8a779g0
+
+      - description: R-Car H3e (R8A779M0)
+        items:
+          - enum:
+              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m0
+          - const: renesas,r8a7795
+
+      - description: R-Car H3e-2G (R8A779M1)
+        items:
+          - enum:
+              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m1
+          - const: renesas,r8a7795
+
+      - description: R-Car M3e (R8A779M2)
+        items:
+          - enum:
+              - renesas,m3ulcb      # M3ULCB (R-Car Starter Kit Pro)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m2
+          - const: renesas,r8a77961
+
+      - description: R-Car M3e-2G (R8A779M3)
+        items:
+          - enum:
+              - renesas,m3ulcb      # M3ULCB (R-Car Starter Kit Pro)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m3
+          - const: renesas,r8a77961
+
+      - description: R-Car M3Ne (R8A779M4)
+        items:
+          - enum:
+              - renesas,m3nulcb     # M3NULCB (R-Car Starter Kit Pro)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m4
+          - const: renesas,r8a77965
+
+      - description: R-Car M3Ne-2G (R8A779M5)
+        items:
+          - enum:
+              - renesas,m3nulcb     # M3NULCB (R-Car Starter Kit Pro)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m5
+          - const: renesas,r8a77965
+
+      - description: R-Car E3e (R8A779M6)
+        items:
+          - enum:
+              - renesas,ebisu       # Ebisu
+          - const: renesas,r8a779m6
+          - const: renesas,r8a77990
+
+      - description: R-Car D3e (R8A779M7)
+        items:
+          - enum:
+              - renesas,draak       # Draak
+          - const: renesas,r8a779m7
+          - const: renesas,r8a77995
+
+      - description: R-Car H3Ne (R8A779M8)
+        items:
+          - enum:
+              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m8
+          - const: renesas,r8a7795
+
+      - description: R-Car H3Ne-1.7G (R8A779MB)
+        items:
+          - enum:
+              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779mb
+          - const: renesas,r8a7795
+
       - description: RZ/N1D (R9A06G032)
         items:
           - enum:
               - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
           - const: renesas,r9a06g032
 
+      - description: RZ/G2UL (R9A07G043)
+        items:
+          - enum:
+              - renesas,smarc-evk # SMARC EVK
+          - enum:
+              - renesas,r9a07g043u11 # RZ/G2UL Type-1
+              - renesas,r9a07g043u12 # RZ/G2UL Type-2
+          - const: renesas,r9a07g043
+
+      - description: RZ/G2{L,LC} (R9A07G044)
+        items:
+          - enum:
+              - renesas,smarc-evk # SMARC EVK
+          - enum:
+              - renesas,r9a07g044c1 # Single Cortex-A55 RZ/G2LC
+              - renesas,r9a07g044c2 # Dual Cortex-A55 RZ/G2LC
+              - renesas,r9a07g044l1 # Single Cortex-A55 RZ/G2L
+              - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L
+          - const: renesas,r9a07g044
+
+      - description: RZ/V2L (R9A07G054)
+        items:
+          - enum:
+              - renesas,smarc-evk # SMARC EVK
+          - enum:
+              - renesas,r9a07g054l1 # Single Cortex-A55 RZ/V2L
+              - renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L
+          - const: renesas,r9a07g054
+
+      - description: RZ/V2M (R9A09G011)
+        items:
+          - enum:
+              - renesas,rzv2mevk2   # RZ/V2M Eval Board v2.0
+          - const: renesas,r9a09g011
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 874b0eaa2a75..c6c69a4e3777 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/rockchip.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip platforms device tree bindings
+title: Rockchip platforms
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
@@ -30,6 +30,16 @@ properties:
           - const: amarula,vyasa-rk3288
           - const: rockchip,rk3288
 
+      - description: Anbernic RG353P
+        items:
+          - const: anbernic,rg353p
+          - const: rockchip,rk3566
+
+      - description: Anbernic RG503
+        items:
+          - const: anbernic,rg503
+          - const: rockchip,rk3566
+
       - description: Asus Tinker board
         items:
           - const: asus,rk3288-tinker
@@ -70,6 +80,24 @@ properties:
           - const: elgin,rv1108-r1
           - const: rockchip,rv1108
 
+      - description: Engicam PX30.Core C.TOUCH 2.0
+        items:
+          - const: engicam,px30-core-ctouch2
+          - const: engicam,px30-core
+          - const: rockchip,px30
+
+      - description: Engicam PX30.Core C.TOUCH 2.0 10.1" Open Frame
+        items:
+          - const: engicam,px30-core-ctouch2-of10
+          - const: engicam,px30-core
+          - const: rockchip,px30
+
+      - description: Engicam PX30.Core EDIMM2.2 Starter Kit
+        items:
+          - const: engicam,px30-core-edimm2.2
+          - const: engicam,px30-core
+          - const: rockchip,px30
+
       - description: Firefly Firefly-RK3288
         items:
           - enum:
@@ -97,6 +125,11 @@ properties:
           - const: firefly,roc-rk3328-cc
           - const: rockchip,rk3328
 
+      - description: Firefly ROC-RK3328-PC
+        items:
+          - const: firefly,roc-rk3328-pc
+          - const: rockchip,rk3328
+
       - description: Firefly ROC-RK3399-PC
         items:
           - enum:
@@ -104,12 +137,31 @@ properties:
               - firefly,roc-rk3399-pc-mezzanine
           - const: rockchip,rk3399
 
+      - description: Firefly ROC-RK3399-PC-PLUS
+        items:
+          - enum:
+              - firefly,roc-rk3399-pc-plus
+          - const: rockchip,rk3399
+
+      - description: Firefly Station M2
+        items:
+          - const: firefly,rk3566-roc-pc
+          - const: rockchip,rk3566
+
+      - description: FriendlyElec NanoPi R2S
+        items:
+          - const: friendlyarm,nanopi-r2s
+          - const: rockchip,rk3328
+
       - description: FriendlyElec NanoPi4 series boards
         items:
           - enum:
               - friendlyarm,nanopc-t4
               - friendlyarm,nanopi-m4
+              - friendlyarm,nanopi-m4b
               - friendlyarm,nanopi-neo4
+              - friendlyarm,nanopi-r4s
+              - friendlyarm,nanopi-r4s-enterprise
           - const: rockchip,rk3399
 
       - description: GeekBuying GeekBox
@@ -262,6 +314,34 @@ properties:
           - const: google,veyron
           - const: rockchip,rk3288
 
+      - description: Google Scarlet - Dumo (ASUS Chromebook Tablet CT100)
+        items:
+          - const: google,scarlet-rev15-sku0
+          - const: google,scarlet-rev15
+          - const: google,scarlet-rev14-sku0
+          - const: google,scarlet-rev14
+          - const: google,scarlet-rev13-sku0
+          - const: google,scarlet-rev13
+          - const: google,scarlet-rev12-sku0
+          - const: google,scarlet-rev12
+          - const: google,scarlet-rev11-sku0
+          - const: google,scarlet-rev11
+          - const: google,scarlet-rev10-sku0
+          - const: google,scarlet-rev10
+          - const: google,scarlet-rev9-sku0
+          - const: google,scarlet-rev9
+          - const: google,scarlet-rev8-sku0
+          - const: google,scarlet-rev8
+          - const: google,scarlet-rev7-sku0
+          - const: google,scarlet-rev7
+          - const: google,scarlet-rev6-sku0
+          - const: google,scarlet-rev6
+          - const: google,scarlet-rev5-sku0
+          - const: google,scarlet-rev5
+          - const: google,scarlet
+          - const: google,gru
+          - const: rockchip,rk3399
+
       - description: Google Scarlet - Kingdisplay (Acer Chromebook Tab 10)
         items:
           - const: google,scarlet-rev15-sku7
@@ -294,30 +374,55 @@ properties:
           - const: google,gru
           - const: rockchip,rk3399
 
-      - description: Google Scarlet - Innolux display (Acer Chromebook Tab 10)
+      - description: |
+          Google Scarlet - Innolux display (Acer Chromebook Tab 10 and more)
         items:
+          - const: google,scarlet-rev15-sku2
+          - const: google,scarlet-rev15-sku4
           - const: google,scarlet-rev15-sku6
           - const: google,scarlet-rev15
+          - const: google,scarlet-rev14-sku2
+          - const: google,scarlet-rev14-sku4
           - const: google,scarlet-rev14-sku6
           - const: google,scarlet-rev14
+          - const: google,scarlet-rev13-sku2
+          - const: google,scarlet-rev13-sku4
           - const: google,scarlet-rev13-sku6
           - const: google,scarlet-rev13
+          - const: google,scarlet-rev12-sku2
+          - const: google,scarlet-rev12-sku4
           - const: google,scarlet-rev12-sku6
           - const: google,scarlet-rev12
+          - const: google,scarlet-rev11-sku2
+          - const: google,scarlet-rev11-sku4
           - const: google,scarlet-rev11-sku6
           - const: google,scarlet-rev11
+          - const: google,scarlet-rev10-sku2
+          - const: google,scarlet-rev10-sku4
           - const: google,scarlet-rev10-sku6
           - const: google,scarlet-rev10
+          - const: google,scarlet-rev9-sku2
+          - const: google,scarlet-rev9-sku4
           - const: google,scarlet-rev9-sku6
           - const: google,scarlet-rev9
+          - const: google,scarlet-rev8-sku2
+          - const: google,scarlet-rev8-sku4
           - const: google,scarlet-rev8-sku6
           - const: google,scarlet-rev8
+          - const: google,scarlet-rev7-sku2
+          - const: google,scarlet-rev7-sku4
           - const: google,scarlet-rev7-sku6
           - const: google,scarlet-rev7
+          - const: google,scarlet-rev6-sku2
+          - const: google,scarlet-rev6-sku4
           - const: google,scarlet-rev6-sku6
           - const: google,scarlet-rev6
+          - const: google,scarlet-rev5-sku2
+          - const: google,scarlet-rev5-sku4
           - const: google,scarlet-rev5-sku6
           - const: google,scarlet-rev5
+          - const: google,scarlet-rev4-sku2
+          - const: google,scarlet-rev4-sku4
           - const: google,scarlet-rev4-sku6
           - const: google,scarlet-rev4
           - const: google,scarlet
@@ -358,6 +463,11 @@ properties:
           - const: haoyu,marsboard-rk3066
           - const: rockchip,rk3066a
 
+      - description: Hardkernel Odroid Go Advance
+        items:
+          - const: hardkernel,rk3326-odroid-go2
+          - const: rockchip,rk3326
+
       - description: Hugsun X99 TV Box
         items:
           - const: hugsun,x99
@@ -371,6 +481,11 @@ properties:
               - khadas,edge-v
           - const: rockchip,rk3399
 
+      - description: Kobol Helios64
+        items:
+          - const: kobol,helios64
+          - const: rockchip,rk3399
+
       - description: Mecer Xtreme Mini S6
         items:
           - const: mecer,xms6
@@ -391,6 +506,11 @@ properties:
           - const: netxeon,r89
           - const: rockchip,rk3288
 
+      - description: OPEN AI LAB EAIDK-610
+        items:
+          - const: openailab,eaidk-610
+          - const: rockchip,rk3399
+
       - description: Orange Pi RK3399 board
         items:
           - const: rockchip,rk3399-orangepi
@@ -402,6 +522,24 @@ properties:
           - const: phytec,rk3288-phycore-som
           - const: rockchip,rk3288
 
+      - description: Pine64 PinebookPro
+        items:
+          - const: pine64,pinebook-pro
+          - const: rockchip,rk3399
+
+      - description: Pine64 PineNote
+        items:
+          - enum:
+              - pine64,pinenote-v1.1
+              - pine64,pinenote-v1.2
+          - const: pine64,pinenote
+          - const: rockchip,rk3566
+
+      - description: Pine64 PinePhonePro
+        items:
+          - const: pine64,pinephone-pro
+          - const: rockchip,rk3399
+
       - description: Pine64 Rock64
         items:
           - const: pine64,rock64
@@ -415,27 +553,73 @@ properties:
           - const: pine64,rockpro64
           - const: rockchip,rk3399
 
+      - description: Pine64 Quartz64 Model A/B
+        items:
+          - enum:
+              - pine64,quartz64-a
+              - pine64,quartz64-b
+          - const: rockchip,rk3566
+
+      - description: Pine64 SoQuartz SoM
+        items:
+          - enum:
+              - pine64,soquartz-cm4io
+          - const: pine64,soquartz
+          - const: rockchip,rk3566
+
       - description: Radxa Rock
         items:
           - const: radxa,rock
           - const: rockchip,rk3188
 
-      - description: Radxa ROCK Pi 4
+      - description: Radxa ROCK Pi 4A/A+/B/B+/C
         items:
+          - enum:
+              - radxa,rockpi4a
+              - radxa,rockpi4a-plus
+              - radxa,rockpi4b
+              - radxa,rockpi4b-plus
+              - radxa,rockpi4c
           - const: radxa,rockpi4
           - const: rockchip,rk3399
 
+      - description: Radxa ROCK 4C+
+        items:
+          - const: radxa,rock-4c-plus
+          - const: rockchip,rk3399
+
+      - description: Radxa ROCK Pi E
+        items:
+          - const: radxa,rockpi-e
+          - const: rockchip,rk3328
+
+      - description: Radxa ROCK Pi N8
+        items:
+          - const: radxa,rockpi-n8
+          - const: vamrs,rk3288-vmarc-som
+          - const: rockchip,rk3288
+
       - description: Radxa ROCK Pi N10
         items:
           - const: radxa,rockpi-n10
           - const: vamrs,rk3399pro-vmarc-som
           - const: rockchip,rk3399pro
 
+      - description: Radxa ROCK Pi S
+        items:
+          - const: radxa,rockpis
+          - const: rockchip,rk3308
+
       - description: Radxa Rock2 Square
         items:
           - const: radxa,rock2-square
           - const: rockchip,rk3288
 
+      - description: Radxa ROCK3 Model A
+        items:
+          - const: radxa,rock3a
+          - const: rockchip,rk3568
+
       - description: Rikomagic MK808 v1
         items:
           - const: rikomagic,mk808
@@ -443,7 +627,7 @@ properties:
 
       - description: Rockchip Kylin
         items:
-          - const: rockchip,kylin-rk3036
+          - const: rockchip,rk3036-kylin
           - const: rockchip,rk3036
 
       - description: Rockchip PX3 Evaluation board
@@ -468,6 +652,11 @@ properties:
           - const: rockchip,r88
           - const: rockchip,rk3368
 
+      - description: Rockchip RK3036 Evaluation board
+        items:
+          - const: rockchip,rk3036-evb
+          - const: rockchip,rk3036
+
       - description: Rockchip RK3228 Evaluation board
         items:
           - const: rockchip,rk3228-evb
@@ -534,4 +723,22 @@ properties:
         items:
           - const: tronsmart,orion-r68-meta
           - const: rockchip,rk3368
+
+      - description: Zkmagic A95X Z2
+        items:
+          - const: zkmagic,a95x-z2
+          - const: rockchip,rk3318
+
+      - description: Rockchip RK3568 Evaluation board
+        items:
+          - const: rockchip,rk3568-evb1-v10
+          - const: rockchip,rk3568
+
+      - description: Rockchip RK3568 Banana Pi R2 Pro
+        items:
+          - const: rockchip,rk3568-bpi-r2pro
+          - const: rockchip,rk3568
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.txt b/Documentation/devicetree/bindings/arm/rockchip/pmu.txt
deleted file mode 100644
index 3ee9b428b2f7..000000000000
--- a/Documentation/devicetree/bindings/arm/rockchip/pmu.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Rockchip power-management-unit:
--------------------------------
-
-The pmu is used to turn off and on different power domains of the SoCs
-This includes the power to the CPU cores.
-
-Required node properties:
-- compatible value : = "rockchip,rk3066-pmu";
-- reg : physical base address and the size of the registers window
-
-Example:
-
-	pmu@20004000 {
-		compatible = "rockchip,rk3066-pmu";
-		reg = <0x20004000 0x100>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
new file mode 100644
index 000000000000..8c73bc7f4009
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/rockchip/pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Power Management Unit (PMU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The PMU is used to turn on and off different power domains of the SoCs.
+  This includes the power to the CPU cores.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,px30-pmu
+          - rockchip,rk3066-pmu
+          - rockchip,rk3128-pmu
+          - rockchip,rk3288-pmu
+          - rockchip,rk3368-pmu
+          - rockchip,rk3399-pmu
+          - rockchip,rk3568-pmu
+          - rockchip,rk3588-pmu
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,px30-pmu
+          - rockchip,rk3066-pmu
+          - rockchip,rk3128-pmu
+          - rockchip,rk3288-pmu
+          - rockchip,rk3368-pmu
+          - rockchip,rk3399-pmu
+          - rockchip,rk3568-pmu
+          - rockchip,rk3588-pmu
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    pmu@20004000 {
+      compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
+      reg = <0x20004000 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
deleted file mode 100644
index afcd70803c12..000000000000
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
+++ /dev/null
@@ -1,39 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/samsung/exynos-chipid.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Samsung Exynos SoC series Chipid driver
-
-maintainers:
-  - Krzysztof Kozlowski <krzk@kernel.org>
-
-properties:
-  compatible:
-    items:
-      - const: samsung,exynos4210-chipid
-
-  reg:
-    maxItems: 1
-
-  samsung,asv-bin:
-    description:
-      Adaptive Supply Voltage bin selection. This can be used
-      to determine the ASV bin of an SoC if respective information
-      is missing in the CHIPID registers or in the OTP memory.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1, 2, 3 ]
-
-required:
-  - compatible
-  - reg
-
-examples:
-  - |
-    chipid@10000000 {
-        compatible = "samsung,exynos4210-chipid";
-        reg = <0x10000000 0x100>;
-        samsung,asv-bin = <2>;
-    };
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
deleted file mode 100644
index 73b56fc5bf58..000000000000
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
+++ /dev/null
@@ -1,105 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/samsung/pmu.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Samsung Exynos SoC series Power Management Unit (PMU)
-
-maintainers:
-  - Krzysztof Kozlowski <krzk@kernel.org>
-
-# Custom select to avoid matching all nodes with 'syscon'
-select:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - samsung,exynos3250-pmu
-          - samsung,exynos4210-pmu
-          - samsung,exynos4412-pmu
-          - samsung,exynos5250-pmu
-          - samsung,exynos5260-pmu
-          - samsung,exynos5410-pmu
-          - samsung,exynos5420-pmu
-          - samsung,exynos5433-pmu
-          - samsung,exynos7-pmu
-  required:
-    - compatible
-
-properties:
-  compatible:
-    items:
-      - enum:
-          - samsung,exynos3250-pmu
-          - samsung,exynos4210-pmu
-          - samsung,exynos4412-pmu
-          - samsung,exynos5250-pmu
-          - samsung,exynos5260-pmu
-          - samsung,exynos5410-pmu
-          - samsung,exynos5420-pmu
-          - samsung,exynos5433-pmu
-          - samsung,exynos7-pmu
-      - const: syscon
-
-  reg:
-    maxItems: 1
-
-  '#clock-cells':
-    const: 1
-
-  clock-names:
-    description:
-      List of clock names for particular CLKOUT mux inputs
-    minItems: 1
-    maxItems: 32
-    items:
-      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
-
-  clocks:
-    minItems: 1
-    maxItems: 32
-
-  interrupt-controller:
-    description:
-      Some PMUs are capable of behaving as an interrupt controller (mostly
-      to wake up a suspended PMU).
-
-  '#interrupt-cells':
-    description:
-      Must be identical to the that of the parent interrupt controller.
-    const: 3
-
-  syscon-poweroff:
-    $ref: "../../power/reset/syscon-poweroff.yaml#"
-    type: object
-    description:
-      Node for power off method
-
-  syscon-reboot:
-    $ref: "../../power/reset/syscon-reboot.yaml#"
-    type: object
-    description:
-      Node for reboot method
-
-required:
-  - compatible
-  - reg
-  - '#clock-cells'
-  - clock-names
-  - clocks
-
-examples:
-  - |
-    #include <dt-bindings/clock/exynos5250.h>
-
-    pmu_system_controller: system-controller@10040000 {
-        compatible = "samsung,exynos5250-pmu", "syscon";
-        reg = <0x10040000 0x5000>;
-        interrupt-controller;
-        #interrupt-cells = <3>;
-        interrupt-parent = <&gic>;
-        #clock-cells = <1>;
-        clock-names = "clkout16";
-        clocks = <&clock CLK_FIN_PLL>;
-    };
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index 63acd57c4799..faea33e4f731 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -14,6 +14,19 @@ properties:
     const: '/'
   compatible:
     oneOf:
+      - description: S3C2416 based boards
+        items:
+          - enum:
+              - samsung,smdk2416                # Samsung SMDK2416
+          - const: samsung,s3c2416
+
+      - description: S3C6410 based boards
+        items:
+          - enum:
+              - friendlyarm,mini6410            # FriendlyARM Mini6410
+              - samsung,smdk6410                # Samsung SMDK6410
+          - const: samsung,s3c6410
+
       - description: S5PV210 based boards
         items:
           - enum:
@@ -52,6 +65,7 @@ properties:
         items:
           - enum:
               - insignal,origen                 # Insignal Origen
+              - samsung,i9100                   # Samsung Galaxy S2 (GT-I9100)
               - samsung,smdkv310                # Samsung SMDKV310 eval
               - samsung,trats                   # Samsung Tizen Reference
               - samsung,universal_c210          # Samsung C210
@@ -82,6 +96,14 @@ properties:
           - const: samsung,exynos4412
           - const: samsung,exynos4
 
+      - description: Samsung p4note family boards
+        items:
+          - enum:
+              - samsung,n8010                   # Samsung GT-N8010/GT-N8013
+          - const: samsung,p4note
+          - const: samsung,exynos4412
+          - const: samsung,exynos4
+
       - description: Exynos5250 based boards
         items:
           - enum:
@@ -118,6 +140,8 @@ properties:
         items:
           - enum:
               - insignal,arndale-octa           # Insignal Arndale Octa
+              - samsung,chagall-wifi            # Samsung SM-T800
+              - samsung,klimt-wifi              # Samsung SM-T700
               - samsung,smdk5420                # Samsung SMDK5420 eval
           - const: samsung,exynos5420
           - const: samsung,exynos5
@@ -177,5 +201,25 @@ properties:
               - samsung,exynos7-espresso        # Samsung Exynos7 Espresso
           - const: samsung,exynos7
 
+      - description: Exynos7885 based boards
+        items:
+          - enum:
+              - samsung,jackpotlte              # Samsung Galaxy A8 (2018)
+          - const: samsung,exynos7885
+
+      - description: Exynos850 based boards
+        items:
+          - enum:
+              - winlink,e850-96                 # WinLink E850-96
+          - const: samsung,exynos850
+
+      - description: Exynos Auto v9 based boards
+        items:
+          - enum:
+              - samsung,exynosautov9-sadk   # Samsung Exynos Auto v9 SADK
+          - const: samsung,exynosautov9
+
 required:
   - compatible
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
index 51d23b6f8a94..3d9abad3c749 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
@@ -23,6 +23,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     firmware@203f000 {
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml
new file mode 100644
index 000000000000..653f85997643
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/samsung-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C, S5P and Exynos SoC compatibles naming convention
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  Guidelines for new compatibles for SoC blocks/components.
+  When adding new compatibles in new bindings, use the format::
+    samsung,SoC-IP
+
+  For example::
+    samsung,exynos5433-cmu-isp
+
+select:
+  properties:
+    compatible:
+      pattern: "^samsung,.*(s3c|s5pv|exynos)[0-9a-z]+.*$"
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: Preferred naming style for compatibles of SoC components
+        pattern: "^samsung,(s3c|s5pv|exynos|exynosautov)[0-9]+-.*$"
+
+      # Legacy compatibles with wild-cards - list cannot grow with new bindings:
+      - enum:
+          - samsung,exynos4x12-pinctrl
+          - samsung,exynos4x12-usb2-phy
+          - samsung,s3c64xx-pinctrl
+          - samsung,s3c64xx-wakeup-eint
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml b/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml
deleted file mode 100644
index 3b7811804cb4..000000000000
--- a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml
+++ /dev/null
@@ -1,45 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/samsung/sysreg.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Samsung S5P/Exynos SoC series System Registers (SYSREG)
-
-maintainers:
-  - Krzysztof Kozlowski <krzk@kernel.org>
-
-# Custom select to avoid matching all nodes with 'syscon'
-select:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - samsung,exynos4-sysreg
-          - samsung,exynos5-sysreg
-  required:
-    - compatible
-
-properties:
-  compatible:
-    allOf:
-      - items:
-          - enum:
-              - samsung,exynos4-sysreg
-              - samsung,exynos5-sysreg
-          - const: syscon
-
-  reg:
-    maxItems: 1
-
-examples:
-  - |
-    syscon@10010000 {
-        compatible = "samsung,exynos4-sysreg", "syscon";
-        reg = <0x10010000 0x400>;
-    };
-
-    syscon@10050000 {
-        compatible = "samsung,exynos5-sysreg", "syscon";
-        reg = <0x10050000 0x5000>;
-    };
diff --git a/Documentation/devicetree/bindings/arm/scu.txt b/Documentation/devicetree/bindings/arm/scu.txt
deleted file mode 100644
index 74d0a780ce51..000000000000
--- a/Documentation/devicetree/bindings/arm/scu.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* ARM Snoop Control Unit (SCU)
-
-As part of the MPCore complex, Cortex-A5 and Cortex-A9 are provided
-with a Snoop Control Unit. The register range is usually 256 (0x100)
-bytes.
-
-References:
-
-- Cortex-A9: see DDI0407E Cortex-A9 MPCore Technical Reference Manual
-  Revision r2p0
-- Cortex-A5: see DDI0434B Cortex-A5 MPCore Technical Reference Manual
-  Revision r0p1
-- ARM11 MPCore: see DDI0360F ARM 11 MPCore Processor Technical Reference
-  Manial Revision r2p0
-
-- compatible : Should be:
-	"arm,cortex-a9-scu"
-	"arm,cortex-a5-scu"
-	"arm,arm11mp-scu"
-
-- reg : Specify the base address and the size of the SCU register window.
-
-Example:
-
-scu@a0410000 {
-	compatible = "arm,cortex-a9-scu";
-	reg = <0xa0410000 0x100>;
-};
diff --git a/Documentation/devicetree/bindings/arm/sirf.yaml b/Documentation/devicetree/bindings/arm/sirf.yaml
deleted file mode 100644
index 0b597032c923..000000000000
--- a/Documentation/devicetree/bindings/arm/sirf.yaml
+++ /dev/null
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/sirf.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: CSR SiRFprimaII and SiRFmarco device tree bindings.
-
-maintainers:
-  - Binghua Duan <binghua.duan@csr.com>
-  - Barry Song <Baohua.Song@csr.com>
-
-properties:
-  $nodename:
-    const: '/'
-  compatible:
-    oneOf:
-      - items:
-          - const: sirf,atlas6-cb
-          - const: sirf,atlas6
-      - items:
-          - const: sirf,atlas7-cb
-          - const: sirf,atlas7
-      - items:
-          - const: sirf,prima2-cb
-          - const: sirf,prima2
-...
diff --git a/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt
deleted file mode 100644
index d27a646f48a9..000000000000
--- a/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-UniPhier outer cache controller
-
-UniPhier SoCs are integrated with a full-custom outer cache controller system.
-All of them have a level 2 cache controller, and some have a level 3 cache
-controller as well.
-
-Required properties:
-- compatible: should be "socionext,uniphier-system-cache"
-- reg: offsets and lengths of the register sets for the device.  It should
-  contain 3 regions: control register, revision register, operation register,
-  in this order.
-- cache-unified: specifies the cache is a unified cache.
-- cache-size: specifies the size in bytes of the cache
-- cache-sets: specifies the number of associativity sets of the cache
-- cache-line-size: specifies the line size in bytes
-- cache-level: specifies the level in the cache hierarchy.  The value should
-  be 2 for L2 cache, 3 for L3 cache, etc.
-
-Optional properties:
-- next-level-cache: phandle to the next level cache if present.  The next level
-  cache should be also compatible with "socionext,uniphier-system-cache".
-
-The L2 cache must exist to use the L3 cache; the cache hierarchy must be
-indicated correctly with "next-level-cache" properties.
-
-Example 1 (system with L2):
-	l2: l2-cache@500c0000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
-		      <0x506c0000 0x400>;
-		cache-unified;
-		cache-size = <0x80000>;
-		cache-sets = <256>;
-		cache-line-size = <128>;
-		cache-level = <2>;
-	};
-
-Example 2 (system with L2 and L3):
-	l2: l2-cache@500c0000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
-		      <0x506c0000 0x400>;
-		cache-unified;
-		cache-size = <0x200000>;
-		cache-sets = <512>;
-		cache-line-size = <128>;
-		cache-level = <2>;
-		next-level-cache = <&l3>;
-	};
-
-	l3: l3-cache@500c8000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
-		      <0x506c8000 0x400>;
-		cache-unified;
-		cache-size = <0x400000>;
-		cache-sets = <512>;
-		cache-line-size = <256>;
-		cache-level = <3>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
index 2bd519d2e855..aa1d4afbc510 100644
--- a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
+++ b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
@@ -19,4 +19,7 @@ properties:
           - enum:
               - socionext,milbeaut-m10v-evb
           - const: socionext,sc2000a
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml
new file mode 100644
index 000000000000..6096c082d56d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/socionext/socionext,uniphier-system-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier outer cache controller
+
+description: |
+  UniPhier ARM 32-bit SoCs are integrated with a full-custom outer cache
+  controller system. All of them have a level 2 cache controller, and some
+  have a level 3 cache controller as well.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    const: socionext,uniphier-system-cache
+
+  reg:
+    description: |
+      should contain 3 regions: control register, revision register,
+      operation register, in this order.
+    maxItems: 3
+
+  interrupts:
+    description: |
+      Interrupts can be used to notify the completion of cache operations.
+      The number of interrupts should match to the number of CPU cores.
+      The specified interrupts correspond to CPU0, CPU1, ... in this order.
+    minItems: 1
+    maxItems: 4
+
+  cache-unified: true
+
+  cache-size: true
+
+  cache-sets: true
+
+  cache-line-size: true
+
+  cache-level:
+    minimum: 2
+    maximum: 3
+
+  next-level-cache: true
+
+allOf:
+  - $ref: /schemas/cache-controller.yaml#
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - cache-unified
+  - cache-size
+  - cache-sets
+  - cache-line-size
+  - cache-level
+
+examples:
+  - |
+    // System with L2.
+    cache-controller@500c0000 {
+        compatible = "socionext,uniphier-system-cache";
+        reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+        interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+        cache-unified;
+        cache-size = <0x140000>;
+        cache-sets = <512>;
+        cache-line-size = <128>;
+        cache-level = <2>;
+    };
+  - |
+    // System with L2 and L3.
+    //   L2 should specify the next level cache by 'next-level-cache'.
+    l2: cache-controller@500c0000 {
+        compatible = "socionext,uniphier-system-cache";
+        reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>;
+        interrupts = <0 190 4>, <0 191 4>;
+        cache-unified;
+        cache-size = <0x200000>;
+        cache-sets = <512>;
+        cache-line-size = <128>;
+        cache-level = <2>;
+        next-level-cache = <&l3>;
+    };
+
+    l3: cache-controller@500c8000 {
+        compatible = "socionext,uniphier-system-cache";
+        reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>;
+        interrupts = <0 174 4>, <0 175 4>;
+        cache-unified;
+        cache-size = <0x200000>;
+        cache-sets = <512>;
+        cache-line-size = <256>;
+        cache-level = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/uniphier.txt
deleted file mode 100644
index b3ed1033740e..000000000000
--- a/Documentation/devicetree/bindings/arm/socionext/uniphier.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Socionext UniPhier SoC family
------------------------------
-
-Required properties in the root node:
-  - compatible: should contain board and SoC compatible strings
-
-SoC and board compatible strings:
-  (sorted chronologically)
-
-  - LD4 SoC:  "socionext,uniphier-ld4"
-      - Reference Board: "socionext,uniphier-ld4-ref"
-
-  - Pro4 SoC: "socionext,uniphier-pro4"
-      - Reference Board: "socionext,uniphier-pro4-ref"
-      - Ace Board:       "socionext,uniphier-pro4-ace"
-      - Sanji Board:     "socionext,uniphier-pro4-sanji"
-
-  - sLD8 SoC: "socionext,uniphier-sld8"
-      - Reference Board: "socionext,uniphier-sld8-ref"
-
-  - PXs2 SoC: "socionext,uniphier-pxs2"
-      - Gentil Board:    "socionext,uniphier-pxs2-gentil"
-      - Vodka Board:     "socionext,uniphier-pxs2-vodka"
-
-  - LD6b SoC: "socionext,uniphier-ld6b"
-      - Reference Board: "socionext,uniphier-ld6b-ref"
-
-  - LD11 SoC: "socionext,uniphier-ld11"
-      - Reference Board: "socionext,uniphier-ld11-ref"
-      - Global Board:    "socionext,uniphier-ld11-global"
-
-  - LD20 SoC: "socionext,uniphier-ld20"
-      - Reference Board: "socionext,uniphier-ld20-ref"
-      - Global Board:    "socionext,uniphier-ld20-global"
-
-  - PXs3 SoC: "socionext,uniphier-pxs3"
-      - Reference Board: "socionext,uniphier-pxs3-ref"
-
-Example:
-
-/dts-v1/;
-
-/ {
-	compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20";
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
new file mode 100644
index 000000000000..8c0e91658474
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/socionext/uniphier.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier platform device tree bindings
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  $nodename:
+    const: /
+  compatible:
+    oneOf:
+      - description: LD4 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-ld4-ref
+          - const: socionext,uniphier-ld4
+      - description: Pro4 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-pro4-ace
+              - socionext,uniphier-pro4-ref
+              - socionext,uniphier-pro4-sanji
+          - const: socionext,uniphier-pro4
+      - description: sLD8 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-sld8-ref
+          - const: socionext,uniphier-sld8
+      - description: PXs2 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-pxs2-gentil
+              - socionext,uniphier-pxs2-vodka
+          - const: socionext,uniphier-pxs2
+      - description: LD6b SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-ld6b-ref
+          - const: socionext,uniphier-ld6b
+      - description: LD11 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-ld11-global
+              - socionext,uniphier-ld11-ref
+          - const: socionext,uniphier-ld11
+      - description: LD20 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-ld20-akebi96
+              - socionext,uniphier-ld20-global
+              - socionext,uniphier-ld20-ref
+          - const: socionext,uniphier-ld20
+      - description: PXs3 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-pxs3-ref
+          - const: socionext,uniphier-pxs3
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt
deleted file mode 100644
index 46652bf65147..000000000000
--- a/Documentation/devicetree/bindings/arm/sp810.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SP810 System Controller
------------------------
-
-Required properties:
-
-- compatible:	standard compatible string for a Primecell peripheral,
-		see Documentation/devicetree/bindings/arm/primecell.yaml
-		for more details
-		should be: "arm,sp810", "arm,primecell"
-
-- reg:		standard registers property, physical address and size
-		of the control registers
-
-- clock-names:	from the common clock bindings, for more details see
-		Documentation/devicetree/bindings/clock/clock-bindings.txt;
-		should be: "refclk", "timclk", "apb_pclk"
-
-- clocks:	from the common clock bindings, phandle and clock
-		specifier pairs for the entries of clock-names property
-
-- #clock-cells: from the common clock bindings;
-		should be: <1>
-
-- clock-output-names: from the common clock bindings;
-		should be: "timerclken0", "timerclken1", "timerclken2", "timerclken3"
-
-- assigned-clocks: from the common clock binding;
-		should be: clock specifier for each output clock of this
-		provider node
-
-- assigned-clock-parents: from the common clock binding;
-		should be: phandle of input clock listed in clocks
-		property with the highest frequency
-
-Example:
-	v2m_sysctl: sysctl@20000 {
-		compatible = "arm,sp810", "arm,primecell";
-		reg = <0x020000 0x1000>;
-		clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-		clock-names = "refclk", "timclk", "apb_pclk";
-		#clock-cells = <1>;
-		clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-		assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
-		assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
-
-	};
diff --git a/Documentation/devicetree/bindings/arm/sp810.yaml b/Documentation/devicetree/bindings/arm/sp810.yaml
new file mode 100644
index 000000000000..bc8e524aa90a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sp810.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sp810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express SP810 System Controller bindings
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm SP810 system controller provides clocks, timers and a watchdog.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,sp810
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,sp810
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: refclk
+      - const: timclk
+      - const: apb_pclk
+
+  clocks:
+    items:
+      - description: reference clock
+      - description: timer clock
+      - description: APB register access clock
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 4
+
+  assigned-clocks:
+    maxItems: 4
+
+  assigned-clock-parents:
+    maxItems: 4
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+examples:
+  - |
+    sysctl@20000 {
+        compatible = "arm,sp810", "arm,primecell";
+        reg = <0x020000 0x1000>;
+        clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+        clock-names = "refclk", "timclk", "apb_pclk";
+        #clock-cells = <1>;
+        clock-output-names = "timerclken0", "timerclken1",
+                             "timerclken2", "timerclken3";
+        assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>,
+                          <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+        assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>,
+                                 <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/spe-pmu.txt b/Documentation/devicetree/bindings/arm/spe-pmu.txt
deleted file mode 100644
index 93372f2a7df9..000000000000
--- a/Documentation/devicetree/bindings/arm/spe-pmu.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU)
-
-ARMv8.2 introduces the optional Statistical Profiling Extension for collecting
-performance sample data using an in-memory trace buffer.
-
-** SPE Required properties:
-
-- compatible : should be one of:
-	       "arm,statistical-profiling-extension-v1"
-
-- interrupts : Exactly 1 PPI must be listed. For heterogeneous systems where
-               SPE is only supported on a subset of the CPUs, please consult
-	       the arm,gic-v3 binding for details on describing a PPI partition.
-
-** Example:
-
-spe-pmu {
-        compatible = "arm,statistical-profiling-extension-v1";
-        interrupts = <GIC_PPI 05 IRQ_TYPE_LEVEL_HIGH &part1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/spear.yaml b/Documentation/devicetree/bindings/arm/spear.yaml
index f6ec731c9531..a465c9eca76e 100644
--- a/Documentation/devicetree/bindings/arm/spear.yaml
+++ b/Documentation/devicetree/bindings/arm/spear.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/spear.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ST SPEAr Platforms Device Tree Bindings
+title: ST SPEAr Platforms
 
 maintainers:
   - Viresh Kumar <vireshk@kernel.org>
@@ -22,4 +22,7 @@ properties:
           - st,spear320
           - st,spear1310
           - st,spear1340
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
index 0258a96bfbde..2c12e571394b 100644
--- a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
+++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
@@ -30,4 +30,11 @@ properties:
               - sprd,sp9863a-1h10
           - const: sprd,sc9863a
 
+      - items:
+          - enum:
+              - sprd,ums512-1h10
+          - const: sprd,ums512
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/ste-u300.txt b/Documentation/devicetree/bindings/arm/ste-u300.txt
deleted file mode 100644
index d11d80006a19..000000000000
--- a/Documentation/devicetree/bindings/arm/ste-u300.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-ST-Ericsson U300 Device Tree Bindings
-
-For various board the "board" node may contain specific properties
-that pertain to this particular board, such as board-specific GPIOs
-or board power regulator supplies.
-
-Required root node property:
-
-compatible="stericsson,u300";
-
-Required node: syscon
-This contains the system controller.
-- compatible: must be "stericsson,u300-syscon".
-- reg: the base address and size of the system controller.
-
-Boards with the U300 SoC include:
-
-S365 "Small Board U365":
-
-Required node: s365
-This contains the board-specific information.
-- compatible: must be "stericsson,s365".
-- vana15-supply: the regulator supplying the 1.5V to drive the
-  board.
-- syscon: a pointer to the syscon node so we can access the
-  syscon registers to set the board as self-powered.
-
-Example:
-
-/ {
-	model = "ST-Ericsson U300";
-	compatible = "stericsson,u300";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	s365 {
-		compatible = "stericsson,s365";
-		vana15-supply = <&ab3100_ldo_d_reg>;
-		syscon = <&syscon>;
-	};
-
-	syscon: syscon@c0011000 {
-		compatible = "stericsson,u300-syscon";
-		reg = <0xc0011000 0x1000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/arm/sti.yaml b/Documentation/devicetree/bindings/arm/sti.yaml
index 47f9b8eebaa0..3ca054c64377 100644
--- a/Documentation/devicetree/bindings/arm/sti.yaml
+++ b/Documentation/devicetree/bindings/arm/sti.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/arm/sti.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ST STi Platforms Device Tree Bindings
+title: ST STi Platforms
 
 maintainers:
-  - Patrice Chotard <patrice.chotard@st.com>
+  - Patrice Chotard <patrice.chotard@foss.st.com>
 
 properties:
   $nodename:
@@ -20,4 +20,7 @@ properties:
           - st,stih407
           - st,stih410
           - st,stih418
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
index 55f7938c4826..ecb28e90fd11 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
@@ -7,8 +7,8 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: STMicroelectronics STM32 ML-AHB interconnect bindings
 
 maintainers:
-  - Fabien Dessenne <fabien.dessenne@st.com>
-  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
 
 description: |
   These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects
@@ -20,7 +20,7 @@ description: |
   [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping
 
 allOf:
- - $ref: /schemas/simple-bus.yaml#
+  - $ref: /schemas/simple-bus.yaml#
 
 properties:
   compatible:
@@ -50,6 +50,8 @@ required:
   - '#size-cells'
   - dma-ranges
 
+unevaluatedProperties: false
+
 examples:
   - |
     mlahb: ahb@38000000 {
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index 0dedf94c8578..6f846d69c5e1 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -7,16 +7,24 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: STMicroelectronics STM32 Platforms System Controller bindings
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
-  - Christophe Roullier <christophe.roullier@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Christophe Roullier <christophe.roullier@foss.st.com>
 
 properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - st,stm32mp157-syscfg
-        - const: syscon
+          - enum:
+              - st,stm32mp157-syscfg
+              - st,stm32mp151-pwr-mcu
+              - st,stm32-syscfg
+              - st,stm32-power-config
+              - st,stm32-tamp
+          - const: syscon
+      - items:
+          - const: st,stm32-tamp
+          - const: syscon
+          - const: simple-mfd
 
   reg:
     maxItems: 1
@@ -27,7 +35,18 @@ properties:
 required:
   - compatible
   - reg
-  - clocks
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32mp157-syscfg
+then:
+  required:
+    - clocks
+
+additionalProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 1fcf306bd2d1..4c605bccc474 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -7,11 +7,18 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 Platforms Device Tree Bindings
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     oneOf:
+      - description: emtrion STM32MP1 Argon based Boards
+        items:
+          - const: emtrion,stm32mp157c-emsbc-argon
+          - const: emtrion,stm32mp157c-emstamp-argon
+          - const: st,stm32mp157
       - items:
           - enum:
               - st,stm32f429i-disco
@@ -37,14 +44,111 @@ properties:
           - const: st,stm32h743
       - items:
           - enum:
-              - arrow,stm32mp157a-avenger96 # Avenger96
+              - st,stm32h750i-art-pi
+          - const: st,stm32h750
+      - items:
+          - enum:
+              - st,stm32mp135f-dk
+          - const: st,stm32mp135
+
+      - description: ST STM32MP151 based Boards
+        items:
+          - enum:
+              - prt,prtt1a   # Protonic PRTT1A
+              - prt,prtt1c   # Protonic PRTT1C
+              - prt,prtt1s   # Protonic PRTT1S
+          - const: st,stm32mp151
+
+      - description: DH STM32MP153 DHCOM SoM based Boards
+        items:
+          - const: dh,stm32mp153c-dhcom-drc02
+          - const: dh,stm32mp153c-dhcom-som
+          - const: st,stm32mp153
+
+      - description: DH STM32MP153 DHCOR SoM based Boards
+        items:
+          - const: dh,stm32mp153c-dhcor-drc-compact
+          - const: dh,stm32mp153c-dhcor-som
+          - const: st,stm32mp153
+
+      - items:
+          - enum:
+              - shiratech,stm32mp157a-iot-box # IoT Box
+              - shiratech,stm32mp157a-stinger96 # Stinger96
               - st,stm32mp157c-ed1
               - st,stm32mp157a-dk1
               - st,stm32mp157c-dk2
+          - const: st,stm32mp157
 
+      - items:
+          - const: st,stm32mp157a-dk1-scmi
+          - const: st,stm32mp157a-dk1
+          - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-dk2-scmi
+          - const: st,stm32mp157c-dk2
+          - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-ed1-scmi
+          - const: st,stm32mp157c-ed1
+          - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-ev1
+          - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
       - items:
+          - const: st,stm32mp157c-ev1-scmi
           - const: st,stm32mp157c-ev1
           - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
+
+      - description: DH STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - arrow,stm32mp157a-avenger96 # Avenger96
+          - const: dh,stm32mp157a-dhcor-som
+          - const: st,stm32mp157
+
+      - description: DH STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - dh,stm32mp157c-dhcom-pdk2
+              - dh,stm32mp157c-dhcom-picoitx
+          - const: dh,stm32mp157c-dhcom-som
+          - const: st,stm32mp157
+
+      - description: Engicam i.Core STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - engicam,icore-stm32mp1-ctouch2       # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0
+              - engicam,icore-stm32mp1-ctouch2-of10  # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF
+              - engicam,icore-stm32mp1-edimm2.2      # STM32MP1 Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
+          - const: engicam,icore-stm32mp1            # STM32MP1 Engicam i.Core STM32MP1 SoM
+          - const: st,stm32mp157
+
+      - description: Engicam MicroGEA STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - engicam,microgea-stm32mp1-microdev2.0
+              - engicam,microgea-stm32mp1-microdev2.0-of7
+          - const: engicam,microgea-stm32mp1
+          - const: st,stm32mp157
+
+      - description: Octavo OSD32MP15x System-in-Package based boards
+        items:
+          - enum:
+              - lxa,stm32mp157c-mc1 # Linux Automation MC-1
+          - const: oct,stm32mp15xx-osd32
+          - enum:
+              - st,stm32mp157
+
+      - description: Odyssey STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - seeed,stm32mp157c-odyssey
+          - const: seeed,stm32mp157c-odyssey-som
+          - const: st,stm32mp157
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
new file mode 100644
index 000000000000..def7d0cfeb31
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunplus,sp7021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Boards
+
+maintainers:
+  - qinjian <qinjian@cqplus1.com>
+
+description: |
+  ARM platforms using Sunplus SP7021, an ARM Cortex A7 (4-cores) based SoC.
+  Wiki: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - sunplus,sp7021-achip
+          - sunplus,sp7021-demo-v3
+      - const: sunplus,sp7021
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 327ce6730823..3ad1cd50e3fe 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/sunxi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner platforms device tree bindings
+title: Allwinner platforms
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -16,6 +16,11 @@ properties:
   compatible:
     oneOf:
 
+      - description: Allwinner A100 Perf1 Board
+        items:
+          - const: allwinner,a100-perf1
+          - const: allwinner,sun50i-a100
+
       - description: Allwinner A23 Evaluation Board
         items:
           - const: allwinner,sun8i-a23-evb
@@ -196,6 +201,19 @@ properties:
           - const: dserve,dsrv9703c
           - const: allwinner,sun4i-a10
 
+      - description: Elimo Engineering Impetus SoM
+        items:
+          - const: elimo,impetus
+          - const: sochip,s3
+          - const: allwinner,sun8i-v3
+
+      - description: Elimo Engineering Initium
+        items:
+          - const: elimo,initium
+          - const: elimo,impetus
+          - const: sochip,s3
+          - const: allwinner,sun8i-v3
+
       - description: Empire Electronix D709 Tablet
         items:
           - const: empire-electronix,d709
@@ -206,6 +224,12 @@ properties:
           - const: empire-electronix,m712
           - const: allwinner,sun5i-a13
 
+      - description: Forlinx OKA40i-C Development board
+        items:
+          - const: forlinx,oka40i-c
+          - const: forlinx,feta40i-c
+          - const: allwinner,sun8i-r40
+
       - description: FriendlyARM NanoPi A64
         items:
           - const: friendlyarm,nanopi-a64
@@ -246,6 +270,21 @@ properties:
           - const: friendlyarm,nanopi-neo-plus2
           - const: allwinner,sun50i-h5
 
+      - description: FriendlyARM NanoPi R1
+        items:
+          - const: friendlyarm,nanopi-r1
+          - const: allwinner,sun8i-h3
+
+      - description: FriendlyARM NanoPi R1S H5
+        items:
+          - const: friendlyarm,nanopi-r1s-h5
+          - const: allwinner,sun50i-h5
+
+      - description: FriendlyARM ZeroPi
+        items:
+          - const: friendlyarm,zeropi
+          - const: allwinner,sun8i-h3
+
       - description: Gemei G9 Tablet
         items:
           - const: gemei,g9
@@ -352,6 +391,11 @@ properties:
           - const: libretech,all-h5-cc-h5
           - const: allwinner,sun50i-h5
 
+      - description: Lichee Pi Nano
+        items:
+          - const: licheepi,licheepi-nano
+          - const: allwinner,suniv-f1c100s
+
       - description: Lichee Pi One
         items:
           - const: licheepi,licheepi-one
@@ -394,11 +438,22 @@ properties:
           - const: linksprite,pcduino3-nano
           - const: allwinner,sun7i-a20
 
+      - description: Linutronix Testbox v2
+        items:
+          - const: linutronix,testbox-v2
+          - const: lamobo,lamobo-r1
+          - const: allwinner,sun7i-a20
+
       - description: HAOYU Electronics Marsboard A10
         items:
           - const: haoyu,a10-marsboard
           - const: allwinner,sun4i-a10
 
+      - description: HAOYU Electronics Marsboard A20
+        items:
+          - const: haoyu,a20-marsboard
+          - const: allwinner,sun7i-a20
+
       - description: MapleBoard MP130
         items:
           - const: mapleboard,mp130
@@ -555,6 +610,11 @@ properties:
           - const: olimex,a20-olinuxino-lime
           - const: allwinner,sun7i-a20
 
+      - description: Olimex A20-OlinuXino LIME (with eMMC)
+        items:
+          - const: olimex,a20-olinuxino-lime-emmc
+          - const: allwinner,sun7i-a20
+
       - description: Olimex A20-OlinuXino LIME2
         items:
           - const: olimex,a20-olinuxino-lime2
@@ -615,6 +675,12 @@ properties:
           - const: pine64,pine64-plus
           - const: allwinner,sun50i-a64
 
+      - description: Pine64 PineCube
+        items:
+          - const: pine64,pinecube
+          - const: sochip,s3
+          - const: allwinner,sun8i-v3
+
       - description: Pine64 PineH64 model A
         items:
           - const: pine64,pine-h64
@@ -636,6 +702,34 @@ properties:
           - const: pine64,pinebook
           - const: allwinner,sun50i-a64
 
+      - description: Pine64 PinePhone Developer Batch (1.0)
+        items:
+          - const: pine64,pinephone-1.0
+          - const: pine64,pinephone
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PinePhone Braveheart (1.1)
+        items:
+          - const: pine64,pinephone-1.1
+          - const: pine64,pinephone
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PinePhone (1.2)
+        items:
+          - const: pine64,pinephone-1.2
+          - const: pine64,pinephone
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PineTab, Development Sample
+        items:
+          - const: pine64,pinetab
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PineTab, Early Adopter's batch (and maybe later ones)
+        items:
+          - const: pine64,pinetab-early-adopter
+          - const: allwinner,sun50i-a64
+
       - description: Pine64 SoPine Baseboard
         items:
           - const: pine64,sopine-baseboard
@@ -647,6 +741,11 @@ properties:
           - const: pineriver,mini-xplus
           - const: allwinner,sun4i-a10
 
+      - description: PocketBook Touch Lux 3
+        items:
+          - const: pocketbook,touch-lux-3
+          - const: allwinner,sun5i-a13
+
       - description: Point of View Protab2-IPS9
         items:
           - const: pov,protab2-ips9
@@ -708,16 +807,32 @@ properties:
           - const: sinlinx,sina33
           - const: allwinner,sun8i-a33
 
+      - description: SL631 Action Camera with IMX179
+        items:
+          - const: allwinner,sl631-imx179
+          - const: allwinner,sl631
+          - const: allwinner,sun8i-v3
+
       - description: Tanix TX6
         items:
           - const: oranth,tanix-tx6
           - const: allwinner,sun50i-h6
 
+      - description: Tanix TX6 mini
+        items:
+          - const: oranth,tanix-tx6-mini
+          - const: allwinner,sun50i-h6
+
       - description: TBS A711 Tablet
         items:
           - const: tbs-biometrics,a711
           - const: allwinner,sun8i-a83t
 
+      - description: Topwise A721 Tablet
+        items:
+          - const: topwise,a721
+          - const: allwinner,sun4i-a10
+
       - description: Utoo P66
         items:
           - const: utoo,p66
@@ -748,6 +863,11 @@ properties:
           - const: yones-toptech,bs1078-v2
           - const: allwinner,sun6i-a31s
 
+      - description: X96 Mate TV box
+        items:
+          - const: hechuang,x96-mate
+          - const: allwinner,sun50i-h616
+
       - description: Xunlong OrangePi
         items:
           - const: xunlong,orangepi
@@ -847,3 +967,10 @@ properties:
         items:
           - const: xunlong,orangepi-zero-plus2-h3
           - const: allwinner,sun8i-h3
+
+      - description: Xunlong OrangePi Zero 2
+        items:
+          - const: xunlong,orangepi-zero2
+          - const: allwinner,sun50i-h616
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
index 9370e64992dd..99566688d033 100644
--- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
@@ -29,18 +29,60 @@ properties:
   compatible:
     enum:
       - allwinner,sun5i-a13-mbus
+      - allwinner,sun8i-a33-mbus
+      - allwinner,sun8i-a50-mbus
+      - allwinner,sun8i-a83t-mbus
       - allwinner,sun8i-h3-mbus
+      - allwinner,sun8i-r40-mbus
+      - allwinner,sun8i-v3s-mbus
+      - allwinner,sun8i-v536-mbus
+      - allwinner,sun20i-d1-mbus
+      - allwinner,sun50i-a64-mbus
+      - allwinner,sun50i-a100-mbus
+      - allwinner,sun50i-h5-mbus
+      - allwinner,sun50i-h6-mbus
+      - allwinner,sun50i-h616-mbus
+      - allwinner,sun50i-r329-mbus
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: MBUS interconnect/bandwidth limit/PMU registers
+      - description: DRAM controller/PHY registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mbus
+      - const: dram
 
   clocks:
+    minItems: 1
+    items:
+      - description: MBUS interconnect module clock
+      - description: DRAM controller/PHY module clock
+      - description: Register bus clock, shared by MBUS and DRAM
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: mbus
+      - const: dram
+      - const: bus
+
+  interrupts:
     maxItems: 1
+    description:
+      MBUS PMU activity interrupt.
 
   dma-ranges:
     description:
       See section 2.3.9 of the DeviceTree Specification.
 
+  '#address-cells': true
+
+  '#size-cells': true
+
 required:
   - "#interconnect-cells"
   - compatible
@@ -48,18 +90,79 @@ required:
   - clocks
   - dma-ranges
 
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - allwinner,sun5i-a13-mbus
+            - allwinner,sun8i-r40-mbus
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+    reg-names:
+      minItems: 2
+
+    clocks:
+      minItems: 3
+
+    clock-names:
+      minItems: 3
+
+  required:
+    - reg-names
+    - clock-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+    reg-names:
+      maxItems: 1
+
+    clocks:
+      maxItems: 1
+
+    clock-names:
+      maxItems: 1
+
 additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/sun5i-ccu.h>
+    #include <dt-bindings/clock/sun50i-a64-ccu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    mbus: dram-controller@1c01000 {
+    dram-controller@1c01000 {
         compatible = "allwinner,sun5i-a13-mbus";
         reg = <0x01c01000 0x1000>;
         clocks = <&ccu CLK_MBUS>;
+        #address-cells = <1>;
+        #size-cells = <1>;
         dma-ranges = <0x00000000 0x40000000 0x20000000>;
         #interconnect-cells = <1>;
     };
 
+  - |
+    dram-controller@1c62000 {
+        compatible = "allwinner,sun50i-a64-mbus";
+        reg = <0x01c62000 0x1000>,
+              <0x01c63000 0x1000>;
+        reg-names = "mbus", "dram";
+        clocks = <&ccu CLK_MBUS>,
+                 <&ccu CLK_DRAM>,
+                 <&ccu CLK_BUS_DRAM>;
+        clock-names = "mbus", "dram", "bus";
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+        #interconnect-cells = <1>;
+    };
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
new file mode 100644
index 000000000000..f3878e0b3cc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner CPU Configuration Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-cpuconfig
+      - allwinner,sun8i-a23-cpuconfig
+      - allwinner,sun8i-a83t-cpucfg
+      - allwinner,sun8i-a83t-r-cpucfg
+      - allwinner,sun9i-a80-cpucfg
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+      cpucfg@1f01c00 {
+          compatible = "allwinner,sun6i-a31-cpuconfig";
+          reg = <0x01f01c00 0x300>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
new file mode 100644
index 000000000000..668aadbfe4c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun9i-a80-prcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 PRCM Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun9i-a80-prcm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+      prcm@8001400 {
+          compatible = "allwinner,sun9i-a80-prcm";
+          reg = <0x08001400 0x200>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt
index 2face46a5f64..851f48ead927 100644
--- a/Documentation/devicetree/bindings/arm/syna.txt
+++ b/Documentation/devicetree/bindings/arm/syna.txt
@@ -13,15 +13,11 @@ considered "unstable". Any Marvell Berlin device tree binding may change at any
 time. Be sure to use a device tree binary and a kernel image generated from the
 same source tree.
 
-Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
 stable binding/ABI.
 
 ---------------------------------------------------------------
 
-Boards with the Synaptics AS370 SoC shall have the following properties:
-  Required root node property:
-    compatible: "syna,as370"
-
 Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
 shall have the following properties:
 
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
index 60b38eb5c61a..1f62253f9410 100644
--- a/Documentation/devicetree/bindings/arm/tegra.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -4,13 +4,15 @@
 $id: http://devicetree.org/schemas/arm/tegra.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NVIDIA Tegra device tree bindings
+title: NVIDIA Tegra
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
   - Jonathan Hunter <jonathanh@nvidia.com>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     oneOf:
       - items:
@@ -35,6 +37,12 @@ properties:
           - const: toradex,colibri_t20
           - const: nvidia,tegra20
       - items:
+          - const: asus,tf101
+          - const: nvidia,tegra20
+      - items:
+          - const: acer,picasso
+          - const: nvidia,tegra20
+      - items:
           - enum:
               - nvidia,beaver
           - const: nvidia,tegra30
@@ -45,11 +53,23 @@ properties:
           - const: nvidia,cardhu
           - const: nvidia,tegra30
       - items:
+          - const: asus,tf201
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf300t
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf300tg
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf700t
+          - const: nvidia,tegra30
+      - items:
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30
           - const: nvidia,tegra30
       - items:
-          - const: toradex,apalis_t30-eval-v1.1
+          - const: toradex,apalis_t30-v1.1-eval
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30-v1.1
           - const: toradex,apalis_t30
@@ -60,7 +80,21 @@ properties:
           - const: toradex,colibri_t30
           - const: nvidia,tegra30
       - items:
+          - const: asus,grouper
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tilapia
+          - const: asus,grouper
+          - const: nvidia,tegra30
+      - items:
+          - const: ouya,ouya
+          - const: nvidia,tegra30
+      - items:
+          - const: pegatron,chagall
+          - const: nvidia,tegra30
+      - items:
           - enum:
+              - asus,tf701t
               - nvidia,dalmore
               - nvidia,roth
               - nvidia,tn7
@@ -93,11 +127,45 @@ properties:
               - nvidia,p2571
               - nvidia,p2894-0050-a08
           - const: nvidia,tegra210
-      - items:
-          - enum:
-              - nvidia,p2771-0000
+      - description: Jetson TX2 Developer Kit
+        items:
+          - const: nvidia,p2771-0000
           - const: nvidia,tegra186
-      - items:
-          - enum:
-              - nvidia,p2972-0000
+      - description: Jetson TX2 NX Developer Kit
+        items:
+          - const: nvidia,p3509-0000+p3636-0001
+          - const: nvidia,tegra186
+      - description: Jetson AGX Xavier Developer Kit
+        items:
+          - const: nvidia,p2972-0000
+          - const: nvidia,tegra194
+      - description: Jetson Xavier NX
+        items:
+          - const: nvidia,p3668-0000
+          - const: nvidia,tegra194
+      - description: Jetson Xavier NX (eMMC)
+        items:
+          - const: nvidia,p3668-0001
+          - const: nvidia,tegra194
+      - description: Jetson Xavier NX Developer Kit
+        items:
+          - const: nvidia,p3509-0000+p3668-0000
           - const: nvidia,tegra194
+      - description: Jetson Xavier NX Developer Kit (eMMC)
+        items:
+          - const: nvidia,p3509-0000+p3668-0001
+          - const: nvidia,tegra194
+      - items:
+          - const: nvidia,tegra234-vdk
+          - const: nvidia,tegra234
+      - description: Jetson AGX Orin
+        items:
+          - const: nvidia,p3701-0000
+          - const: nvidia,tegra234
+      - description: Jetson AGX Orin Developer Kit
+        items:
+          - const: nvidia,p3737-0000+p3701-0000
+          - const: nvidia,p3701-0000
+          - const: nvidia,tegra234
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
new file mode 100644
index 000000000000..711bb4d08c60
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra-ccplex-cluster.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra CPU COMPLEX CLUSTER area device tree bindings
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+  The Tegra CPU COMPLEX CLUSTER area contains memory-mapped
+  registers that initiate CPU frequency/voltage transitions.
+
+properties:
+  $nodename:
+    pattern: "ccplex@([0-9a-f]+)$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-ccplex-cluster
+      - nvidia,tegra234-ccplex-cluster
+
+  reg:
+    maxItems: 1
+
+  nvidia,bpmp:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: |
+      Specifies the BPMP node that needs to be queried to get
+      operating point data for all CPUs.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - nvidia,bpmp
+
+examples:
+  - |
+    ccplex@e000000 {
+      compatible = "nvidia,tegra234-ccplex-cluster";
+      reg = <0x0e000000 0x5ffff>;
+      nvidia,bpmp = <&bpmp>;
+      status = "okay";
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
deleted file mode 100644
index 2d89cdc39eb0..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-NVIDIA Tegra Power Management Controller (PMC)
-
-Required properties:
-- compatible: Should contain one of the following:
-  - "nvidia,tegra186-pmc": for Tegra186
-  - "nvidia,tegra194-pmc": for Tegra194
-- reg: Must contain an (offset, length) pair of the register set for each
-  entry in reg-names.
-- reg-names: Must include the following entries:
-  - "pmc"
-  - "wake"
-  - "aotag"
-  - "scratch"
-  - "misc" (Only for Tegra194)
-
-Optional properties:
-- nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value must be 2.
-
-Example:
-
-SoC DTSI:
-
-	pmc@c3600000 {
-		compatible = "nvidia,tegra186-pmc";
-		reg = <0 0x0c360000 0 0x10000>,
-		      <0 0x0c370000 0 0x10000>,
-		      <0 0x0c380000 0 0x10000>,
-		      <0 0x0c390000 0 0x10000>;
-		reg-names = "pmc", "wake", "aotag", "scratch";
-	};
-
-Board DTS:
-
-	pmc@c360000 {
-		nvidia,invert-interrupt;
-	};
-
-== Pad Control ==
-
-On Tegra SoCs a pad is a set of pins which are configured as a group.
-The pin grouping is a fixed attribute of the hardware. The PMC can be
-used to set pad power state and signaling voltage. A pad can be either
-in active or power down mode. The support for power state and signaling
-voltage configuration varies depending on the pad in question. 3.3 V and
-1.8 V signaling voltages are supported on pins where software
-controllable signaling voltage switching is available.
-
-Pad configurations are described with pin configuration nodes which
-are placed under the pmc node and they are referred to by the pinctrl
-client properties. For more information see
-Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
-
-The following pads are present on Tegra186:
-csia		csib		dsi		mipi-bias
-pex-clk-bias	pex-clk3	pex-clk2	pex-clk1
-usb0		usb1		usb2		usb-bias
-uart		audio		hsic		dbg
-hdmi-dp0	hdmi-dp1	pex-cntrl	sdmmc2-hv
-sdmmc4		cam		dsib		dsic
-dsid		csic		csid		csie
-dsif		spi		ufs		dmic-hv
-edp		sdmmc1-hv	sdmmc3-hv	conn
-audio-hv	ao-hv
-
-Required pin configuration properties:
-  - pins: A list of strings, each of which contains the name of a pad
-	  to be configured.
-
-Optional pin configuration properties:
-  - low-power-enable: Configure the pad into power down mode
-  - low-power-disable: Configure the pad into active mode
-  - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
-    TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
-    The values are defined in
-    include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
-
-Note: The power state can be configured on all of the above pads except
-      for ao-hv. Following pads have software configurable signaling
-      voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, audio-hv,
-      ao-hv.
-
-Pad configuration state example:
-	pmc: pmc@7000e400 {
-		compatible = "nvidia,tegra186-pmc";
-		reg = <0 0x0c360000 0 0x10000>,
-		      <0 0x0c370000 0 0x10000>,
-		      <0 0x0c380000 0 0x10000>,
-		      <0 0x0c390000 0 0x10000>;
-		reg-names = "pmc", "wake", "aotag", "scratch";
-
-		...
-
-		sdmmc1_3v3: sdmmc1-3v3 {
-			pins = "sdmmc1-hv";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
-		};
-
-		sdmmc1_1v8: sdmmc1-1v8 {
-			pins = "sdmmc1-hv";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
-		};
-
-		hdmi_off: hdmi-off {
-			pins = "hdmi";
-			low-power-enable;
-		}
-
-		hdmi_on: hdmi-on {
-			pins = "hdmi";
-			low-power-disable;
-		}
-	};
-
-Pinctrl client example:
-	sdmmc1: sdhci@3400000 {
-		...
-		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
-		pinctrl-0 = <&sdmmc1_3v3>;
-		pinctrl-1 = <&sdmmc1_1v8>;
-	};
-
-	...
-
-	sor0: sor@15540000 {
-		...
-		pinctrl-0 = <&hdmi_off>;
-		pinctrl-1 = <&hdmi_on>;
-		pinctrl-names = "hdmi-on", "hdmi-off";
-	};
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml
new file mode 100644
index 000000000000..0faa403f68c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra186-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Power Management Controller (PMC)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-pmc
+      - nvidia,tegra194-pmc
+      - nvidia,tegra234-pmc
+
+  reg:
+    minItems: 4
+    maxItems: 5
+
+  reg-names:
+    minItems: 4
+    items:
+      - const: pmc
+      - const: wake
+      - const: aotag
+      - const: scratch
+      - const: misc
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: Specifies the number of cells needed to encode an
+      interrupt source. The value must be 2.
+    const: 2
+
+  nvidia,invert-interrupt:
+    description: If present, inverts the PMU interrupt signal.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: nvidia,tegra186-pmc
+then:
+  properties:
+    reg:
+      maxItems: 4
+
+    reg-names:
+      maxItems: 4
+else:
+  properties:
+    reg:
+      minItems: 5
+
+    reg-names:
+      minItems: 5
+
+patternProperties:
+  "^[a-z0-9]+-[a-z0-9]+$":
+    if:
+      type: object
+    then:
+      description: |
+        These are pad configuration nodes. On Tegra SoCs a pad is a set of
+        pins which are configured as a group. The pin grouping is a fixed
+        attribute of the hardware. The PMC can be used to set pad power
+        state and signaling voltage. A pad can be either in active or
+        power down mode. The support for power state and signaling voltage
+        configuration varies depending on the pad in question. 3.3 V and
+        1.8 V signaling voltages are supported on pins where software
+        controllable signaling voltage switching is available.
+
+        Pad configurations are described with pin configuration nodes
+        which are placed under the pmc node and they are referred to by
+        the pinctrl client properties. For more information see
+
+          Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+        The following pads are present on Tegra186:
+
+          csia, csib, dsi, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2,
+          pex-clk1, usb0, usb1, usb2, usb-bias, uart, audio, hsic, dbg,
+          hdmi-dp0, hdmi-dp1, pex-cntrl, sdmmc2-hv, sdmmc4, cam, dsib,
+          dsic, dsid, csic, csid, csie, dsif, spi, ufs, dmic-hv, edp,
+          sdmmc1-hv, sdmmc3-hv, conn, audio-hv, ao-hv
+
+        The following pads are present on Tegra194:
+
+          csia, csib, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2,
+          pex-clk1, eqos, pex-clk-2-bias, pex-clk-2, dap3, dap5, uart,
+          pwr-ctl, soc-gpio53, audio, gp-pwm2, gp-pwm3, soc-gpio12,
+          soc-gpio13, soc-gpio10, uart4, uart5, dbg, hdmi-dp3, hdmi-dp2,
+          hdmi-dp0, hdmi-dp1, pex-cntrl, pex-ctl2, pex-l0-rst,
+          pex-l1-rst, sdmmc4, pex-l5-rst, cam, csic, csid, csie, csif,
+          spi, ufs, csig, csih, edp, sdmmc1-hv, sdmmc3-hv, conn,
+          audio-hv, ao-hv
+
+      properties:
+        pins:
+          $ref: /schemas/types.yaml#/definitions/string
+          description: Must contain the name of the pad(s) to be
+            configured.
+
+        low-power-enable:
+          description: Configure the pad into power down mode.
+          $ref: /schemas/types.yaml#/definitions/flag
+
+        low-power-disable:
+          description: Configure the pad into active mode.
+          $ref: /schemas/types.yaml#/definitions/flag
+
+        power-source:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description: |
+            Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+            TEGRA_IO_PAD_VOLTAGE_3V3 to select between signalling
+            voltages.
+
+            The values are defined in
+
+              include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h
+
+            The power state can be configured on all of the above pads
+            except for ao-hv. Following pads have software configurable
+            signaling voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv,
+            audio-hv, ao-hv.
+
+        phandle: true
+
+      required:
+        - pins
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+dependencies:
+  interrupt-controller: ['#interrupt-cells']
+  "#interrupt-cells":
+    required:
+      - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    pmc@c3600000 {
+        compatible = "nvidia,tegra186-pmc";
+        reg = <0x0c360000 0x10000>,
+              <0x0c370000 0x10000>,
+              <0x0c380000 0x10000>,
+              <0x0c390000 0x10000>;
+        reg-names = "pmc", "wake", "aotag", "scratch";
+        nvidia,invert-interrupt;
+
+        sdmmc1_3v3: sdmmc1-3v3 {
+            pins = "sdmmc1-hv";
+            power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+        };
+
+        sdmmc1_1v8: sdmmc1-1v8 {
+            pins = "sdmmc1-hv";
+            power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+        };
+    };
+
+    sdmmc1: mmc@3400000 {
+        compatible = "nvidia,tegra186-sdhci";
+        reg = <0x03400000 0x10000>;
+        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+                 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+        clock-names = "sdhci", "tmclk";
+        resets = <&bpmp TEGRA186_RESET_SDMMC1>;
+        reset-names = "sdhci";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu TEGRA186_SID_SDMMC1>;
+        pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+        pinctrl-0 = <&sdmmc1_3v3>;
+        pinctrl-1 = <&sdmmc1_1v8>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml
new file mode 100644
index 000000000000..788a13f8aa93
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-axi2apb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra194 AXI2APB bridge
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^axi2apb@([0-9a-f]+)$"
+
+  compatible:
+    enum:
+      - nvidia,tegra194-axi2apb
+
+  reg:
+    maxItems: 6
+    description: Physical base address and length of registers for all bridges
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    axi2apb: axi2apb@2390000 {
+      compatible = "nvidia,tegra194-axi2apb";
+      reg = <0x02390000 0x1000>,
+            <0x023a0000 0x1000>,
+            <0x023b0000 0x1000>,
+            <0x023c0000 0x1000>,
+            <0x023d0000 0x1000>,
+            <0x023e0000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml
new file mode 100644
index 000000000000..debb2b0c8013
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-cbb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra194 CBB 1.0 bindings
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+  The Control Backbone (CBB) is comprised of the physical path from an
+  initiator to a target's register configuration space. CBB 1.0 has
+  multiple hierarchical sub-NOCs (Network-on-Chip) and connects various
+  initiators and targets using different bridges like AXIP2P, AXI2APB.
+
+  This driver handles errors due to illegal register accesses reported
+  by the NOCs inside the CBB. NOCs reporting errors are cluster NOCs
+  "AON-NOC, SCE-NOC, RCE-NOC, BPMP-NOC, CV-NOC" and "CBB Central NOC"
+  which is the main NOC.
+
+  By default, the access issuing initiator is informed about the error
+  using SError or Data Abort exception unless the ERD (Error Response
+  Disable) is enabled/set for that initiator. If the ERD is enabled, then
+  SError or Data Abort is masked and the error is reported with interrupt.
+
+  - For CCPLEX (CPU Complex) initiator, the driver sets ERD bit. So, the
+    errors due to illegal accesses from CCPLEX are reported by interrupts.
+    If ERD is not set, then error is reported by SError.
+  - For other initiators, the ERD is disabled. So, the access issuing
+    initiator is informed about the illegal access by Data Abort exception.
+    In addition, an interrupt is also generated to CCPLEX. These initiators
+    include all engines using Cortex-R5 (which is ARMv7 CPU cluster) and
+    engines like TSEC (Security co-processor), NVDEC (NVIDIA Video Decoder
+    engine) etc which can initiate transactions.
+
+  The driver prints relevant debug information like Error Code, Error
+  Description, Master, Address, AXI ID, Cache, Protection, Security Group
+  etc on receiving error notification.
+
+properties:
+  $nodename:
+    pattern: "^[a-z]+-noc@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra194-cbb-noc
+      - nvidia,tegra194-aon-noc
+      - nvidia,tegra194-bpmp-noc
+      - nvidia,tegra194-rce-noc
+      - nvidia,tegra194-sce-noc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      CCPLEX receives secure or nonsecure interrupt depending on error type.
+      A secure interrupt is received for SEC(firewall) & SLV errors and a
+      non-secure interrupt is received for TMO & DEC errors.
+    items:
+      - description: non-secure interrupt
+      - description: secure interrupt
+
+  nvidia,axi2apb:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description:
+      Specifies the node having all axi2apb bridges which need to be checked
+      for any error logged in their status register.
+
+  nvidia,apbmisc:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description:
+      Specifies the apbmisc node which need to be used for reading the ERD
+      register.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - nvidia,apbmisc
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cbb-noc@2300000 {
+        compatible = "nvidia,tegra194-cbb-noc";
+        reg = <0x02300000 0x1000>;
+        interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+        nvidia,axi2apb = <&axi2apb>;
+        nvidia,apbmisc = <&apbmisc>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
deleted file mode 100644
index cb12f33a247f..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ /dev/null
@@ -1,300 +0,0 @@
-NVIDIA Tegra Power Management Controller (PMC)
-
-== Power Management Controller Node ==
-
-The PMC block interacts with an external Power Management Unit. The PMC
-mostly controls the entry and exit of the system from different sleep
-modes. It provides power-gating controllers for SoC and CPU power-islands.
-
-Required properties:
-- name : Should be pmc
-- compatible : Should contain one of the following:
-	For Tegra20 must contain "nvidia,tegra20-pmc".
-	For Tegra30 must contain "nvidia,tegra30-pmc".
-	For Tegra114 must contain "nvidia,tegra114-pmc"
-	For Tegra124 must contain "nvidia,tegra124-pmc"
-	For Tegra132 must contain "nvidia,tegra124-pmc"
-	For Tegra210 must contain "nvidia,tegra210-pmc"
-- reg : Offset and length of the register set for the device
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  "pclk" (The Tegra clock of that name),
-  "clk32k_in" (The 32KHz clock input to Tegra).
-
-Optional properties:
-- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
-  The PMU is an external Power Management Unit, whose interrupt output
-  signal is fed into the PMC. This signal is optionally inverted, and then
-  fed into the ARM GIC. The PMC is not involved in the detection or
-  handling of this interrupt signal, merely its inversion.
-- nvidia,suspend-mode : The suspend mode that the platform should use.
-  Valid values are 0, 1 and 2:
-  0 (LP0): CPU + Core voltage off and DRAM in self-refresh
-  1 (LP1): CPU voltage off and DRAM in self-refresh
-  2 (LP2): CPU voltage off
-- nvidia,core-power-req-active-high : Boolean, core power request active-high
-- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
-- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
-- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
-			   is enabled.
-
-Required properties when nvidia,suspend-mode is specified:
-- nvidia,cpu-pwr-good-time : CPU power good time in uS.
-- nvidia,cpu-pwr-off-time : CPU power off time in uS.
-- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
-			      Core power good time in uS.
-- nvidia,core-pwr-off-time : Core power off time in uS.
-
-Required properties when nvidia,suspend-mode=<0>:
-- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
-  The LP0 vector contains the warm boot code that is executed by AVP when
-  resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
-  processor and always being the first boot processor when chip is power on
-  or resume from deep sleep mode. When the system is resumed from the deep
-  sleep mode, the warm boot code will restore some PLLs, clocks and then
-  bring up CPU0 for resuming the system.
-
-Hardware-triggered thermal reset:
-On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists,
-hardware-triggered thermal reset will be enabled.
-
-Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
-- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are
-                             described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the
-                             Tegra K1 Technical Reference Manual.
-- nvidia,bus-addr : Bus address of the PMU on the I2C bus
-- nvidia,reg-addr : I2C register address to write poweroff command to
-- nvidia,reg-data : Poweroff command to write to PMU
-
-Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
-- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command.
-                     Defaults to 0. Valid values are described in section 12.5.2
-                     "Pinmux Support" of the Tegra4 Technical Reference Manual.
-
-Optional nodes:
-- powergates : This node contains a hierarchy of power domain nodes, which
-	       should match the powergates on the Tegra SoC. See "Powergate
-	       Nodes" below.
-
-Example:
-
-/ SoC dts including file
-pmc@7000f400 {
-	compatible = "nvidia,tegra20-pmc";
-	reg = <0x7000e400 0x400>;
-	clocks = <&tegra_car 110>, <&clk32k_in>;
-	clock-names = "pclk", "clk32k_in";
-	nvidia,invert-interrupt;
-	nvidia,suspend-mode = <1>;
-	nvidia,cpu-pwr-good-time = <2000>;
-	nvidia,cpu-pwr-off-time = <100>;
-	nvidia,core-pwr-good-time = <3845 3845>;
-	nvidia,core-pwr-off-time = <458>;
-	nvidia,core-power-req-active-high;
-	nvidia,sys-clock-req-active-high;
-	nvidia,lp0-vec = <0xbdffd000 0x2000>;
-};
-
-/ Tegra board dts file
-{
-	...
-	pmc@7000f400 {
-		i2c-thermtrip {
-			nvidia,i2c-controller-id = <4>;
-			nvidia,bus-addr = <0x40>;
-			nvidia,reg-addr = <0x36>;
-			nvidia,reg-data = <0x2>;
-		};
-	};
-	...
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-	...
-};
-
-
-== Powergate Nodes ==
-
-Each of the powergate nodes represents a power-domain on the Tegra SoC
-that can be power-gated by the Tegra PMC. The name of the powergate node
-should be one of the below. Note that not every powergate is applicable
-to all Tegra devices and the following list shows which powergates are
-applicable to which devices. Please refer to the Tegra TRM for more
-details on the various powergates.
-
- Name		Description			Devices Applicable
- 3d		3D Graphics			Tegra20/114/124/210
- 3d0		3D Graphics 0			Tegra30
- 3d1		3D Graphics 1			Tegra30
- aud		Audio				Tegra210
- dfd		Debug				Tegra210
- dis		Display A			Tegra114/124/210
- disb		Display B			Tegra114/124/210
- heg		2D Graphics			Tegra30/114/124/210
- iram		Internal RAM			Tegra124/210
- mpe		MPEG Encode			All
- nvdec		NVIDIA Video Decode Engine	Tegra210
- nvjpg		NVIDIA JPEG Engine		Tegra210
- pcie		PCIE				Tegra20/30/124/210
- sata		SATA				Tegra30/124/210
- sor		Display interfaces		Tegra124/210
- ve2		Video Encode Engine 2		Tegra210
- venc		Video Encode Engine		All
- vdec		Video Decode Engine		Tegra20/30/114/124
- vic		Video Imaging Compositor	Tegra124/210
- xusba		USB Partition A			Tegra114/124/210
- xusbb		USB Partition B 		Tegra114/124/210
- xusbc		USB Partition C			Tegra114/124/210
-
-Required properties:
-  - clocks: Must contain an entry for each clock required by the PMC for
-    controlling a power-gate. See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each reset required by the PMC for
-    controlling a power-gate. See ../reset/reset.txt for details.
-  - #power-domain-cells: Must be 0.
-
-Example:
-
-	pmc: pmc@7000e400 {
-		compatible = "nvidia,tegra210-pmc";
-		reg = <0x0 0x7000e400 0x0 0x400>;
-		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-
-		powergates {
-			pd_audio: aud {
-				clocks = <&tegra_car TEGRA210_CLK_APE>,
-					 <&tegra_car TEGRA210_CLK_APB2APE>;
-				resets = <&tegra_car 198>;
-				#power-domain-cells = <0>;
-			};
-		};
-	};
-
-
-== Powergate Clients ==
-
-Hardware blocks belonging to a power domain should contain a "power-domains"
-property that is a phandle pointing to the corresponding powergate node.
-
-Example:
-
-	adma: adma@702e2000 {
-		...
-		power-domains = <&pd_audio>;
-		...
-	};
-
-== Pad Control ==
-
-On Tegra SoCs a pad is a set of pins which are configured as a group.
-The pin grouping is a fixed attribute of the hardware. The PMC can be
-used to set pad power state and signaling voltage. A pad can be either
-in active or power down mode. The support for power state and signaling
-voltage configuration varies depending on the pad in question. 3.3 V and
-1.8 V signaling voltages are supported on pins where software
-controllable signaling voltage switching is available.
-
-The pad configuration state nodes are placed under the pmc node and they
-are referred to by the pinctrl client properties. For more information
-see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
-The pad name should be used as the value of the pins property in pin
-configuration nodes.
-
-The following pads are present on Tegra124 and Tegra132:
-audio		bb		cam		comp
-csia		csb		cse		dsi
-dsib		dsic		dsid		hdmi
-hsic		hv		lvds		mipi-bias
-nand		pex-bias	pex-clk1	pex-clk2
-pex-cntrl	sdmmc1		sdmmc3		sdmmc4
-sys_ddc		uart		usb0		usb1
-usb2		usb_bias
-
-The following pads are present on Tegra210:
-audio		audio-hv	cam		csia
-csib		csic		csid		csie
-csif		dbg		debug-nonao	dmic
-dp		dsi		dsib		dsic
-dsid		emmc		emmc2		gpio
-hdmi		hsic		lvds		mipi-bias
-pex-bias	pex-clk1	pex-clk2	pex-cntrl
-sdmmc1		sdmmc3		spi		spi-hv
-uart		usb0		usb1		usb2
-usb3		usb-bias
-
-Required pin configuration properties:
-  - pins: Must contain name of the pad(s) to be configured.
-
-Optional pin configuration properties:
-  - low-power-enable: Configure the pad into power down mode
-  - low-power-disable: Configure the pad into active mode
-  - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8
-    or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
-    The values are defined in
-    include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
-
-Note: The power state can be configured on all of the Tegra124 and
-      Tegra132 pads. None of the Tegra124 or Tegra132 pads support
-      signaling voltage switching.
-
-Note: All of the listed Tegra210 pads except pex-cntrl support power
-      state configuration. Signaling voltage switching is supported on
-      following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio,
-      pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart.
-
-Pad configuration state example:
-	pmc: pmc@7000e400 {
-		compatible = "nvidia,tegra210-pmc";
-		reg = <0x0 0x7000e400 0x0 0x400>;
-		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-
-		...
-
-		sdmmc1_3v3: sdmmc1-3v3 {
-			pins = "sdmmc1";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
-		};
-
-		sdmmc1_1v8: sdmmc1-1v8 {
-			pins = "sdmmc1";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
-		};
-
-		hdmi_off: hdmi-off {
-			pins = "hdmi";
-			low-power-enable;
-		}
-
-		hdmi_on: hdmi-on {
-			pins = "hdmi";
-			low-power-disable;
-		}
-	};
-
-Pinctrl client example:
-	sdmmc1: sdhci@700b0000 {
-		...
-		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
-		pinctrl-0 = <&sdmmc1_3v3>;
-		pinctrl-1 = <&sdmmc1_1v8>;
-	};
-	...
-	sor@54540000 {
-		...
-		pinctrl-0 = <&hdmi_off>;
-		pinctrl-1 = <&hdmi_on>;
-		pinctrl-names = "hdmi-on", "hdmi-off";
-	};
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
new file mode 100644
index 000000000000..7fd8d47b1be4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
@@ -0,0 +1,389 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra Power Management Controller (PMC)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-pmc
+      - nvidia,tegra30-pmc
+      - nvidia,tegra114-pmc
+      - nvidia,tegra124-pmc
+      - nvidia,tegra210-pmc
+
+  reg:
+    maxItems: 1
+    description:
+      Offset and length of the register set for the device.
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: clk32k_in
+    description:
+      Must includes entries pclk and clk32k_in.
+      pclk is the Tegra clock of that name and clk32k_in is 32KHz clock
+      input to Tegra.
+
+  clocks:
+    maxItems: 2
+    description:
+      Must contain an entry for each entry in clock-names.
+      See ../clocks/clocks-bindings.txt for details.
+
+  '#clock-cells':
+    const: 1
+    description:
+      Tegra PMC has clk_out_1, clk_out_2, and clk_out_3.
+      PMC also has blink control which allows 32Khz clock output to
+      Tegra blink pad.
+      Consumer of PMC clock should specify the desired clock by having
+      the clock ID in its "clocks" phandle cell with pmc clock provider.
+      See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC
+      clock IDs.
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      Specifies number of cells needed to encode an interrupt source.
+      The value must be 2.
+
+  interrupt-controller: true
+
+  nvidia,invert-interrupt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Inverts the PMU interrupt signal.
+      The PMU is an external Power Management Unit, whose interrupt output
+      signal is fed into the PMC. This signal is optionally inverted, and
+      then fed into the ARM GIC. The PMC is not involved in the detection
+      or handling of this interrupt signal, merely its inversion.
+
+  nvidia,core-power-req-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Core power request active-high.
+
+  nvidia,sys-clock-req-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: System clock request active-high.
+
+  nvidia,combined-power-req:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: combined power request for CPU and Core.
+
+  nvidia,cpu-pwr-good-en:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      CPU power good signal from external PMIC to PMC is enabled.
+
+  nvidia,suspend-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    description:
+      The suspend mode that the platform should use.
+      Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh
+      Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh
+      Mode 2 is for LP2, CPU voltage off
+
+  nvidia,cpu-pwr-good-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CPU power good time in uSec.
+
+  nvidia,cpu-pwr-off-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CPU power off time in uSec.
+
+  nvidia,core-pwr-good-time:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      <Oscillator-stable-time Power-stable-time>
+      Core power good time in uSec.
+
+  nvidia,core-pwr-off-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Core power off time in uSec.
+
+  nvidia,lp0-vec:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      <start length> Starting address and length of LP0 vector.
+      The LP0 vector contains the warm boot code that is executed
+      by AVP when resuming from the LP0 state.
+      The AVP (Audio-Video Processor) is an ARM7 processor and
+      always being the first boot processor when chip is power on
+      or resume from deep sleep mode. When the system is resumed
+      from the deep sleep mode, the warm boot code will restore
+      some PLLs, clocks and then brings up CPU0 for resuming the
+      system.
+
+  i2c-thermtrip:
+    type: object
+    description:
+      On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists,
+      hardware-triggered thermal reset will be enabled.
+
+    properties:
+      nvidia,i2c-controller-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          ID of I2C controller to send poweroff command to PMU.
+          Valid values are described in section 9.2.148
+          "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference
+          Manual.
+
+      nvidia,bus-addr:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Bus address of the PMU on the I2C bus.
+
+      nvidia,reg-addr:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: PMU I2C register address to issue poweroff command.
+
+      nvidia,reg-data:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Poweroff command to write to PMU.
+
+      nvidia,pinmux-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Pinmux used by the hardware when issuing Poweroff command.
+          Defaults to 0. Valid values are described in section 12.5.2
+          "Pinmux Support" of the Tegra4 Technical Reference Manual.
+
+    required:
+      - nvidia,i2c-controller-id
+      - nvidia,bus-addr
+      - nvidia,reg-addr
+      - nvidia,reg-data
+
+    additionalProperties: false
+
+  powergates:
+    type: object
+    description: |
+      This node contains a hierarchy of power domain nodes, which should
+      match the powergates on the Tegra SoC. Each powergate node
+      represents a power-domain on the Tegra SoC that can be power-gated
+      by the Tegra PMC.
+      Hardware blocks belonging to a power domain should contain
+      "power-domains" property that is a phandle pointing to corresponding
+      powergate node.
+      The name of the powergate node should be one of the below. Note that
+      not every powergate is applicable to all Tegra devices and the following
+      list shows which powergates are applicable to which devices.
+      Please refer to Tegra TRM for mode details on the powergate nodes to
+      use for each power-gate block inside Tegra.
+      Name		Description			            Devices Applicable
+      3d		  3D Graphics			            Tegra20/114/124/210
+      3d0		  3D Graphics 0		            Tegra30
+      3d1		  3D Graphics 1		            Tegra30
+      aud		  Audio				                Tegra210
+      dfd		  Debug				                Tegra210
+      dis		  Display A			              Tegra114/124/210
+      disb		Display B			              Tegra114/124/210
+      heg		  2D Graphics		            	Tegra30/114/124/210
+      iram		Internal RAM		            Tegra124/210
+      mpe		  MPEG Encode			            All
+      nvdec		NVIDIA Video Decode Engine	Tegra210
+      nvjpg		NVIDIA JPEG Engine		      Tegra210
+      pcie		PCIE				                Tegra20/30/124/210
+      sata		SATA				                Tegra30/124/210
+      sor		  Display interfaces       		Tegra124/210
+      ve2		  Video Encode Engine 2		    Tegra210
+      venc		Video Encode Engine		      All
+      vdec		Video Decode Engine		      Tegra20/30/114/124
+      vic		  Video Imaging Compositor	  Tegra124/210
+      xusba		USB Partition A			        Tegra114/124/210
+      xusbb		USB Partition B 		        Tegra114/124/210
+      xusbc		USB Partition C			        Tegra114/124/210
+
+    patternProperties:
+      "^[a-z0-9]+$":
+        type: object
+
+        properties:
+          clocks:
+            minItems: 1
+            maxItems: 8
+            description:
+              Must contain an entry for each clock required by the PMC
+              for controlling a power-gate.
+              See ../clocks/clock-bindings.txt document for more details.
+
+          resets:
+            minItems: 1
+            maxItems: 8
+            description:
+              Must contain an entry for each reset required by the PMC
+              for controlling a power-gate.
+              See ../reset/reset.txt for more details.
+
+          '#power-domain-cells':
+            const: 0
+            description: Must be 0.
+
+        required:
+          - clocks
+          - resets
+          - '#power-domain-cells'
+
+    additionalProperties: false
+
+patternProperties:
+  "^[a-f0-9]+-[a-f0-9]+$":
+    type: object
+    description:
+      This is a Pad configuration node. On Tegra SOCs a pad is a set of
+      pins which are configured as a group. The pin grouping is a fixed
+      attribute of the hardware. The PMC can be used to set pad power state
+      and signaling voltage. A pad can be either in active or power down mode.
+      The support for power state and signaling voltage configuration varies
+      depending on the pad in question. 3.3V and 1.8V signaling voltages
+      are supported on pins where software controllable signaling voltage
+      switching is available.
+
+      The pad configuration state nodes are placed under the pmc node and they
+      are referred to by the pinctrl client properties. For more information
+      see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+      The pad name should be used as the value of the pins property in pin
+      configuration nodes.
+
+      The following pads are present on Tegra124 and Tegra132
+      audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic,
+      hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl,
+      sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias.
+
+      The following pads are present on Tegra210
+      audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg,
+      debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi,
+      hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1,
+      sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias.
+
+    properties:
+      pins:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Must contain name of the pad(s) to be configured.
+
+      low-power-enable:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: Configure the pad into power down mode.
+
+      low-power-disable:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: Configure the pad into active mode.
+
+      power-source:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+          TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+          The values are defined in
+          include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+          Power state can be configured on all Tegra124 and Tegra132
+          pads. None of the Tegra124 or Tegra132 pads support signaling
+          voltage switching.
+          All of the listed Tegra210 pads except pex-cntrl support power
+          state configuration. Signaling voltage switching is supported
+          on below Tegra210 pads.
+          audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1,
+          sdmmc3, spi, spi-hv, and uart.
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+  core-domain:
+    type: object
+    description: |
+      The vast majority of hardware blocks of Tegra SoC belong to a
+      Core power domain, which has a dedicated voltage rail that powers
+      the blocks.
+
+    properties:
+      operating-points-v2:
+        description:
+          Should contain level, voltages and opp-supported-hw property.
+          The supported-hw is a bitfield indicating SoC speedo or process
+          ID mask.
+
+      "#power-domain-cells":
+        const: 0
+
+    required:
+      - operating-points-v2
+      - "#power-domain-cells"
+
+    additionalProperties: false
+
+  core-supply:
+    description:
+      Phandle to voltage regulator connected to the SoC Core power rail.
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+dependencies:
+  "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
+  "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
+  "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"]
+
+examples:
+  - |
+
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+    #include <dt-bindings/soc/tegra-pmc.h>
+
+    tegra_pmc: pmc@7000e400 {
+              compatible = "nvidia,tegra210-pmc";
+              reg = <0x7000e400 0x400>;
+              core-supply = <&regulator>;
+              clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+              clock-names = "pclk", "clk32k_in";
+              #clock-cells = <1>;
+
+              nvidia,invert-interrupt;
+              nvidia,suspend-mode = <0>;
+              nvidia,cpu-pwr-good-time = <0>;
+              nvidia,cpu-pwr-off-time = <0>;
+              nvidia,core-pwr-good-time = <4587 3876>;
+              nvidia,core-pwr-off-time = <39065>;
+              nvidia,core-power-req-active-high;
+              nvidia,sys-clock-req-active-high;
+
+              pd_core: core-domain {
+                      operating-points-v2 = <&core_opp_table>;
+                      #power-domain-cells = <0>;
+              };
+
+              powergates {
+                    pd_audio: aud {
+                            clocks = <&tegra_car TEGRA210_CLK_APE>,
+                                     <&tegra_car TEGRA210_CLK_APB2APE>;
+                            resets = <&tegra_car 198>;
+                            power-domains = <&pd_core>;
+                            #power-domain-cells = <0>;
+                    };
+
+                    pd_xusbss: xusba {
+                            clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+                            resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+                            power-domains = <&pd_core>;
+                            #power-domain-cells = <0>;
+                    };
+              };
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml
new file mode 100644
index 000000000000..7b1fe50ffbe0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra234-cbb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra CBB 2.0 bindings
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+  The Control Backbone (CBB) is comprised of the physical path from an
+  initiator to a target's register configuration space. CBB 2.0 consists
+  of multiple sub-blocks connected to each other to create a topology.
+  The Tegra234 SoC has different fabrics based on CBB 2.0 architecture
+  which include cluster fabrics BPMP, AON, PSC, SCE, RCE, DCE, FSI and
+  "CBB central fabric".
+
+  In CBB 2.0, each initiator which can issue transactions connects to a
+  Root Master Node (MN) before it connects to any other element of the
+  fabric. Each Root MN contains a Error Monitor (EM) which detects and
+  logs error. Interrupts from various EM blocks are collated by Error
+  Notifier (EN) which is per fabric and presents a single interrupt from
+  fabric to the SoC interrupt controller.
+
+  The driver handles errors from CBB due to illegal register accesses
+  and prints debug information about failed transaction on receiving
+  the interrupt from EN. Debug information includes Error Code, Error
+  Description, MasterID, Fabric, SlaveID, Address, Cache, Protection,
+  Security Group etc on receiving error notification.
+
+  If the Error Response Disable (ERD) is set/enabled for an initiator,
+  then SError or Data abort exception error response is masked and an
+  interrupt is used for reporting errors due to illegal accesses from
+  that initiator. The value returned on read failures is '0xFFFFFFFF'
+  for compatibility with PCIE.
+
+properties:
+  $nodename:
+    pattern: "^[a-z]+-fabric@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra234-aon-fabric
+      - nvidia,tegra234-bpmp-fabric
+      - nvidia,tegra234-cbb-fabric
+      - nvidia,tegra234-dce-fabric
+      - nvidia,tegra234-rce-fabric
+      - nvidia,tegra234-sce-fabric
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: secure interrupt from error notifier
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cbb-fabric@1300000 {
+      compatible = "nvidia,tegra234-cbb-fabric";
+      reg = <0x13a00000 0x400000>;
+      interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
deleted file mode 100644
index ea670a5d7ee3..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-NVIDIA Tegra Activity Monitor
-
-The activity monitor block collects statistics about the behaviour of other
-components in the system. This information can be used to derive the rate at
-which the external memory needs to be clocked in order to serve all requests
-from the monitored clients.
-
-Required properties:
-- compatible: should be "nvidia,tegra<chip>-actmon"
-- reg: offset and length of the register set for the device
-- interrupts: standard interrupt property
-- clocks: Must contain a phandle and clock specifier pair for each entry in
-clock-names. See ../../clock/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - actmon
-  - emc
-- resets: Must contain an entry for each entry in reset-names. See
-../../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - actmon
-
-Example:
-	actmon@6000c800 {
-		compatible = "nvidia,tegra124-actmon";
-		reg = <0x0 0x6000c800 0x0 0x400>;
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
-			 <&tegra_car TEGRA124_CLK_EMC>;
-		clock-names = "actmon", "emc";
-		resets = <&tegra_car 119>;
-		reset-names = "actmon";
-	};
diff --git a/Documentation/devicetree/bindings/arm/tesla.yaml b/Documentation/devicetree/bindings/arm/tesla.yaml
new file mode 100644
index 000000000000..d670a0d56222
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tesla.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tesla.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tesla Full Self Driving(FSD) platforms
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - linux-fsd@tesla.com
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: FSD SoC board
+        items:
+          - enum:
+              - tesla,fsd-evb   # Tesla FSD Evaluation
+          - const: tesla,fsd
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.txt b/Documentation/devicetree/bindings/arm/ti/k3.txt
deleted file mode 100644
index 333e7256126a..000000000000
--- a/Documentation/devicetree/bindings/arm/ti/k3.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Texas Instruments K3 Multicore SoC architecture device tree bindings
---------------------------------------------------------------------
-
-Platforms based on Texas Instruments K3 Multicore SoC architecture
-shall follow the following scheme:
-
-SoCs
-----
-
-Each device tree root node must specify which exact SoC in K3 Multicore SoC
-architecture it uses, using one of the following compatible values:
-
-- AM654
-  compatible = "ti,am654";
-
-- J721E
-  compatible = "ti,j721e";
-
-Boards
-------
-
-In addition, each device tree root node must specify which one or more
-of the following board-specific compatible values:
-
-- AM654 EVM
-  compatible = "ti,am654-evm", "ti,am654";
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
new file mode 100644
index 000000000000..28b8232e1c5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ti/k3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Multicore SoC architecture device tree bindings
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Platforms based on Texas Instruments K3 Multicore SoC architecture
+  shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: K3 AM62A7 SoC
+        items:
+          - enum:
+              - ti,am62a7-sk
+          - const: ti,am62a7
+
+      - description: K3 AM625 SoC
+        items:
+          - enum:
+              - ti,am625-sk
+          - const: ti,am625
+
+      - description: K3 AM642 SoC
+        items:
+          - enum:
+              - ti,am642-evm
+              - ti,am642-sk
+          - const: ti,am642
+
+      - description: K3 AM654 SoC
+        items:
+          - enum:
+              - siemens,iot2050-advanced
+              - siemens,iot2050-advanced-pg2
+              - siemens,iot2050-basic
+              - siemens,iot2050-basic-pg2
+              - ti,am654-evm
+          - const: ti,am654
+
+      - description: K3 J7200 SoC
+        oneOf:
+          - const: ti,j7200
+          - items:
+              - enum:
+                  - ti,j7200-evm
+              - const: ti,j7200
+
+      - description: K3 J721E SoC
+        oneOf:
+          - const: ti,j721e
+          - items:
+              - enum:
+                  - ti,j721e-evm
+                  - ti,j721e-sk
+              - const: ti,j721e
+
+      - description: K3 J721s2 SoC
+        items:
+          - enum:
+              - ti,j721s2-evm
+          - const: ti,j721s2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ti/nspire.yaml b/Documentation/devicetree/bindings/arm/ti/nspire.yaml
index e372b43da62f..cc2023bb7fa6 100644
--- a/Documentation/devicetree/bindings/arm/ti/nspire.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/nspire.yaml
@@ -21,4 +21,7 @@ properties:
           - ti,nspire-tp
           # Clickpad models
           - ti,nspire-clp
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
index a8765ba29476..c022d325fc08 100644
--- a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
@@ -23,4 +23,7 @@ properties:
           - enbw,cmc        # EnBW AM1808 based CMC board
           - lego,ev3        # LEGO MINDSTORMS EV3 (AM1808 based)
       - const: ti,da850
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/toshiba.yaml b/Documentation/devicetree/bindings/arm/toshiba.yaml
new file mode 100644
index 000000000000..716ba4a3cab4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/toshiba.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/toshiba.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti Platform
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Visconti5 TMPV7708
+        items:
+          - enum:
+              - toshiba,tmpv7708-rm-mbrc  # TMPV7708 RM main board
+              - toshiba,tmpv7708-visrobo-vrb  # TMPV7708 VisROBO VRB board
+          - const: toshiba,tmpv7708
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ux500.yaml b/Documentation/devicetree/bindings/arm/ux500.yaml
index accaee906050..b42d20fa4359 100644
--- a/Documentation/devicetree/bindings/arm/ux500.yaml
+++ b/Documentation/devicetree/bindings/arm/ux500.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/ux500.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ux500 platforms device tree bindings
+title: Ux500 platforms
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -20,6 +20,11 @@ properties:
           - const: st-ericsson,mop500
           - const: st-ericsson,u8500
 
+      - description: ST-Ericsson HREF520
+        items:
+          - const: st-ericsson,href520
+          - const: st-ericsson,u8500
+
       - description: ST-Ericsson HREF (v60+)
         items:
           - const: st-ericsson,hrefv60+
@@ -30,7 +35,39 @@ properties:
           - const: calaosystems,snowball-a9500
           - const: st-ericsson,u9500
 
+      - description: Samsung Galaxy Ace 2 (GT-I8160)
+        items:
+          - const: samsung,codina
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Exhibit (SGH-T599)
+        items:
+          - const: samsung,codina-tmo
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Beam (GT-I8530)
+        items:
+          - const: samsung,gavini
+          - const: st-ericsson,u8500
+
       - description: Samsung Galaxy S III mini (GT-I8190)
         items:
           - const: samsung,golden
           - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy S Advance (GT-I9070)
+        items:
+          - const: samsung,janice
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Amp (SGH-I407)
+        items:
+          - const: samsung,kyle
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy XCover 2 (GT-S7710)
+        items:
+          - const: samsung,skomer
+          - const: st-ericsson,u8500
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/ux500/boards.txt b/Documentation/devicetree/bindings/arm/ux500/boards.txt
index 89408de55bfd..18d55532d31e 100644
--- a/Documentation/devicetree/bindings/arm/ux500/boards.txt
+++ b/Documentation/devicetree/bindings/arm/ux500/boards.txt
@@ -20,13 +20,13 @@ during retention, system won't boot without this):
 	compatible = "ste,dbx500-backupram"
 
 scu:
-	see binding for arm/scu.txt
+	see binding for arm/arm,scu.yaml
 
 interrupt-controller:
 	see binding for interrupt-controller/arm,gic.txt
 
 timer:
-	see binding for timer/arm,twd.txt
+	see binding for timer/arm,twd-timer.yaml
 
 clocks:
 	see binding for clocks/ux500.txt
diff --git a/Documentation/devicetree/bindings/arm/versatile-sysreg.txt b/Documentation/devicetree/bindings/arm/versatile-sysreg.txt
deleted file mode 100644
index a4f15262d717..000000000000
--- a/Documentation/devicetree/bindings/arm/versatile-sysreg.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-ARM Versatile system registers
---------------------------------------
-
-This is a system control registers block, providing multiple low level
-platform functions like board detection and identification, software
-interrupt generation, MMC and NOR Flash control etc.
-
-Required node properties:
-- compatible value : = "arm,versatile-sysreg", "syscon"
-- reg : physical base address and the size of the registers window
diff --git a/Documentation/devicetree/bindings/arm/vexpress-config.yaml b/Documentation/devicetree/bindings/arm/vexpress-config.yaml
new file mode 100644
index 000000000000..09e1adf5ca7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-config.yaml
@@ -0,0 +1,285 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/vexpress-config.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express configuration bus bindings
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  This is a system control register block, acting as a bridge to the
+  platform's configuration bus via "system control" interface, addressing
+  devices with site number, position in the board stack, config controller,
+  function and device numbers - see motherboard's TRM for more details.
+
+properties:
+  compatible:
+    const: arm,vexpress,config-bus
+
+  arm,vexpress,config-bridge:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the sysreg node.
+
+  muxfpga:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-muxfpga
+
+      arm,vexpress-sysreg,func:
+        description: FPGA specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 7
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  shutdown:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-shutdown
+
+      arm,vexpress-sysreg,func:
+        description: shutdown identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 8
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  reboot:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-reboot
+
+      arm,vexpress-sysreg,func:
+        description: reboot identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 9
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  dvimode:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-dvimode
+
+      arm,vexpress-sysreg,func:
+        description: DVI mode identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 11
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+additionalProperties: false
+
+required:
+  - compatible
+  - arm,vexpress,config-bridge
+
+patternProperties:
+  'clk[0-9]*$':
+    type: object
+    description:
+      clocks
+
+    properties:
+      compatible:
+        const: arm,vexpress-osc
+
+      arm,vexpress-sysreg,func:
+        description: clock specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 1
+          - description: clock number
+
+      freq-range:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: minimal clock frequency
+          - description: maximum clock frequency
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+      - "#clock-cells"
+
+  "^volt-.+$":
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        const: arm,vexpress-volt
+
+      arm,vexpress-sysreg,func:
+        description: regulator specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 2
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    unevaluatedProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^amp-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-amp
+
+      arm,vexpress-sysreg,func:
+        description: current sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 3
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^temp-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-temp
+
+      arm,vexpress-sysreg,func:
+        description: temperature sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 4
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^reset[0-9]*$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-reset
+
+      arm,vexpress-sysreg,func:
+        description: reset specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 5
+          - description: reset device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^power-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-power
+
+      arm,vexpress-sysreg,func:
+        description: power sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 12
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^energy(-.+)?$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-energy
+
+      arm,vexpress-sysreg,func:
+        description: energy sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        oneOf:
+          - items:
+              - const: 13
+              - description: device number
+          - items:
+              - const: 13
+              - description: device number
+              - const: 13
+              - description: second device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+examples:
+  - |
+    mcc {
+        compatible = "arm,vexpress,config-bus";
+        arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+        clk0 {
+            compatible = "arm,vexpress-osc";
+            arm,vexpress-sysreg,func = <1 0>;
+            #clock-cells = <0>;
+        };
+
+        energy {
+            compatible = "arm,vexpress-energy";
+            arm,vexpress-sysreg,func = <13 0>, <13 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
deleted file mode 100644
index 50095802fb4a..000000000000
--- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-ARM Versatile Express system registers
---------------------------------------
-
-This is a system control registers block, providing multiple low level
-platform functions like board detection and identification, software
-interrupt generation, MMC and NOR Flash control etc.
-
-Required node properties:
-- compatible value : = "arm,vexpress,sysreg";
-- reg : physical base address and the size of the registers window
-
-Deprecated properties, replaced by GPIO subnodes (see below):
-- gpio-controller : specifies that the node is a GPIO controller
-- #gpio-cells : size of the GPIO specifier, should be 2:
-  - first cell is the pseudo-GPIO line number:
-    0 - MMC CARDIN
-    1 - MMC WPROT
-    2 - NOR FLASH WPn
-  - second cell can take standard GPIO flags (currently ignored).
-
-Control registers providing pseudo-GPIO lines must be represented
-by subnodes, each of them requiring the following properties:
-- compatible value : one of
-			"arm,vexpress-sysreg,sys_led"
-			"arm,vexpress-sysreg,sys_mci"
-			"arm,vexpress-sysreg,sys_flash"
-- gpio-controller : makes the node a GPIO controller
-- #gpio-cells : size of the GPIO specifier, must be 2:
-  - first cell is the function number:
-    - for sys_led : 0..7 = LED 0..7
-    - for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
-    - for sys_flash : 0 = NOR FLASH WPn
-  - second cell can take standard GPIO flags (currently ignored).
-
-Example:
-	v2m_sysreg: sysreg@10000000 {
- 		compatible = "arm,vexpress-sysreg";
- 		reg = <0x10000000 0x1000>;
-
-		v2m_led_gpios: sys_led@8 {
-			compatible = "arm,vexpress-sysreg,sys_led";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		v2m_mmc_gpios: sys_mci@48 {
-			compatible = "arm,vexpress-sysreg,sys_mci";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		v2m_flash_gpios: sys_flash@4c {
-			compatible = "arm,vexpress-sysreg,sys_flash";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
- 	};
-
-This block also can also act a bridge to the platform's configuration
-bus via "system control" interface, addressing devices with site number,
-position in the board stack, config controller, function and device
-numbers - see motherboard's TRM for more details. All configuration
-controller accessible via this interface must reference the sysreg
-node via "arm,vexpress,config-bridge" phandle and define appropriate
-topology properties - see main vexpress node documentation for more
-details. Each child of such node describes one function and must
-define the following properties:
-- compatible value : must be one of (corresponding to the TRM):
-	"arm,vexpress-amp"
-	"arm,vexpress-dvimode"
-	"arm,vexpress-energy"
-	"arm,vexpress-muxfpga"
-	"arm,vexpress-osc"
-	"arm,vexpress-power"
-	"arm,vexpress-reboot"
-	"arm,vexpress-reset"
-	"arm,vexpress-scc"
-	"arm,vexpress-shutdown"
-	"arm,vexpress-temp"
-	"arm,vexpress-volt"
-- arm,vexpress-sysreg,func : must contain a set of two cells long groups:
-  - first cell of each group defines the function number
-    (eg. 1 for clock generator, 2 for voltage regulators etc.)
-  - second cell of each group defines device number (eg. osc 0,
-    osc 1 etc.)
-  - some functions (eg. energy meter, with its 64 bit long counter)
-    are using more than one function/device number pair
-
-Example:
-	mcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-		};
-
-		energy@0 {
-			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 0>, <13 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml
new file mode 100644
index 000000000000..f04db802a732
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/vexpress-sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express system registers bindings
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  This is a system control registers block, providing multiple low level
+  platform functions like board detection and identification, software
+  interrupt generation, MMC and NOR Flash control, etc.
+
+properties:
+  compatible:
+    const: arm,vexpress-sysreg
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  gpio-controller:
+    deprecated: true
+
+  "#gpio-cells":
+    deprecated: true
+    const: 2
+
+additionalProperties: false
+
+patternProperties:
+  '^gpio@[0-9a-f]+$':
+    type: object
+    additionalProperties: false
+    description:
+      GPIO children
+
+    properties:
+      compatible:
+        enum:
+          - arm,vexpress-sysreg,sys_led
+          - arm,vexpress-sysreg,sys_mci
+          - arm,vexpress-sysreg,sys_flash
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+        description: |
+          The first cell is the function number:
+          for sys_led : 0..7 = LED 0..7
+          for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
+          for sys_flash : 0 = NOR FLASH WPn
+          The second cell can take standard GPIO flags.
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - "#gpio-cells"
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    sysreg@0 {
+        compatible = "arm,vexpress-sysreg";
+        reg = <0x00000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0 0x1000>;
+
+        v2m_led_gpios: gpio@8 {
+            compatible = "arm,vexpress-sysreg,sys_led";
+            reg = <0x008 4>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt
deleted file mode 100644
index 39844cd0bcce..000000000000
--- a/Documentation/devicetree/bindings/arm/vexpress.txt
+++ /dev/null
@@ -1,229 +0,0 @@
-ARM Versatile Express boards family
------------------------------------
-
-ARM's Versatile Express platform consists of a motherboard and one
-or more daughterboards (tiles). The motherboard provides a set of
-peripherals. Processor and RAM "live" on the tiles.
-
-The motherboard and each core tile should be described by a separate
-Device Tree source file, with the tile's description including
-the motherboard file using a /include/ directive. As the motherboard
-can be initialized in one of two different configurations ("memory
-maps"), care must be taken to include the correct one.
-
-
-Root node
----------
-
-Required properties in the root node:
-- compatible value:
-	compatible = "arm,vexpress,<model>", "arm,vexpress";
-  where <model> is the full tile model name (as used in the tile's
-    Technical Reference Manual), eg.:
-    - for Coretile Express A5x2 (V2P-CA5s):
-	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
-    - for Coretile Express A9x4 (V2P-CA9):
-	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
-  If a tile comes in several variants or can be used in more then one
-  configuration, the compatible value should be:
-	compatible = "arm,vexpress,<model>,<variant>", \
-				"arm,vexpress,<model>", "arm,vexpress";
-  eg:
-    - Coretile Express A15x2 (V2P-CA15) with Tech Chip 1:
-	compatible = "arm,vexpress,v2p-ca15,tc1", \
-				"arm,vexpress,v2p-ca15", "arm,vexpress";
-    - LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM:
-	compatible = "arm,vexpress,v2f-2xv6,ca7x3", \
-				"arm,vexpress,v2f-2xv6", "arm,vexpress";
-
-Optional properties in the root node:
-- tile model name (use name from the tile's Technical Reference
-  Manual, eg. "V2P-CA5s")
-	model = "<model>";
-- tile's HBI number (unique ARM's board model ID, visible on the
-  PCB's silkscreen) in hexadecimal transcription:
-	arm,hbi = <0xhbi>
-  eg:
-  - for Coretile Express A5x2 (V2P-CA5s) HBI-0191:
-	arm,hbi = <0x191>;
-  - Coretile Express A9x4 (V2P-CA9) HBI-0225:
-	arm,hbi = <0x225>;
-
-
-CPU nodes
----------
-
-Top-level standard "cpus" node is required. It must contain a node
-with device_type = "cpu" property for every available core, eg.:
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <0>;
-		};
-	};
-
-
-Configuration infrastructure
-----------------------------
-
-The platform has an elaborated configuration system, consisting of
-microcontrollers residing on the mother- and daughterboards known
-as Motherboard/Daughterboard Configuration Controller (MCC and DCC).
-The controllers are responsible for the platform initialization
-(reset generation, flash programming, FPGA bitfiles loading etc.)
-but also control clock generators, voltage regulators, gather
-environmental data like temperature, power consumption etc. Even
-the video output switch (FPGA) is controlled that way.
-
-The controllers are not mapped into normal memory address space
-and must be accessed through bridges - other devices capable
-of generating transactions on the configuration bus.
-
-The nodes describing configuration controllers must define
-the following properties:
-- compatible value:
-	compatible = "arm,vexpress,config-bus";
-- bridge phandle:
-	arm,vexpress,config-bridge = <phandle>;
-and children describing available functions.
-
-
-Platform topology
------------------
-
-As Versatile Express can be configured in number of physically
-different setups, the device tree should describe platform topology.
-Root node and main motherboard node must define the following
-property, describing physical location of the children nodes:
-- site number:
-	arm,vexpress,site = <number>;
-  where 0 means motherboard, 1 or 2 are daugtherboard sites,
-  0xf means "master" site (site containing main CPU tile)
-- when daughterboards are stacked on one site, their position
-  in the stack be be described with:
-	arm,vexpress,position = <number>;
-- when describing tiles consisting more than one DCC, its number
-  can be described with:
-	arm,vexpress,dcc = <number>;
-
-Any of the numbers above defaults to zero if not defined in
-the node or any of its parent.
-
-
-Motherboard
------------
-
-The motherboard description file provides a single "motherboard" node
-using 2 address cells corresponding to the Static Memory Bus used
-between the motherboard and the tile. The first cell defines the Chip
-Select (CS) line number, the second cell address offset within the CS.
-All interrupt lines between the motherboard and the tile are active
-high and are described using single cell.
-
-Optional properties of the "motherboard" node:
-- motherboard's memory map variant:
-	arm,v2m-memory-map = "<name>";
-  where name is one of:
-  - "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also
-            referred to as "ARM Cortex-A Series memory map":
-	arm,v2m-memory-map = "rs1";
-  When this property is missing, the motherboard is using the original
-  memory map (also known as the "Legacy memory map", primarily used
-  with the original CoreTile Express A9x4) with peripherals on CS7.
-
-Motherboard .dtsi files provide a set of labelled peripherals that
-can be used to obtain required phandle in the tile's "aliases" node:
-- UARTs, note that the numbers correspond to the physical connectors
-  on the motherboard's back panel:
-	v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3
-- I2C controllers:
-	v2m_i2c_dvi and v2m_i2c_pcie
-- SP804 timers:
-	v2m_timer01 and v2m_timer23
-
-The tile description should define a "smb" node, describing the
-Static Memory Bus between the tile and motherboard. It must define
-the following properties:
-- "simple-bus" compatible value (to ensure creation of the children)
-	compatible = "simple-bus";
-- mapping of the SMB CS/offset addresses into main address space:
-	#address-cells = <2>;
-	#size-cells = <1>;
-	ranges = <...>;
-- interrupts mapping:
-	#interrupt-cells = <1>;
-	interrupt-map-mask = <0 0 63>;
-	interrupt-map = <...>;
-
-
-Example of a VE tile description (simplified)
----------------------------------------------
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA5s";
-	arm,hbi = <0x225>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <0>;
-		};
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x2c001000 0x1000>,
-		      <0x2c000100 0x100>;
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			compatible = "arm,vexpress-osc";
-		};
-	};
-
-	smb {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		/* CS0 is visible at 0x08000000 */
-		ranges = <0 0 0x08000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		/* Active high IRQ 0 is connected to GIC's SPI0 */
-		interrupt-map = <0 0 0 &gic 0 0 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/arm/vt8500.yaml b/Documentation/devicetree/bindings/arm/vt8500.yaml
index 7b25b6fa34e9..5d5ad5a60451 100644
--- a/Documentation/devicetree/bindings/arm/vt8500.yaml
+++ b/Documentation/devicetree/bindings/arm/vt8500.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/vt8500.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: VIA/Wondermedia VT8500 Platforms Device Tree Bindings
+title: VIA/Wondermedia VT8500 Platforms
 
 maintainers:
   - Tony Prisk <linux@prisktech.co.nz>
@@ -21,3 +21,5 @@ properties:
           - wm,wm8650
           - wm,wm8750
           - wm,wm8850
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt
index db5c56db30ec..61d77acbeb5e 100644
--- a/Documentation/devicetree/bindings/arm/xen.txt
+++ b/Documentation/devicetree/bindings/arm/xen.txt
@@ -7,15 +7,17 @@ the following properties:
 	compatible = "xen,xen-<version>", "xen,xen";
   where <version> is the version of the Xen ABI of the platform.
 
-- reg: specifies the base physical address and size of a region in
-  memory where the grant table should be mapped to, using an
-  HYPERVISOR_memory_op hypercall. The memory region is large enough to map
-  the whole grant table (it is larger or equal to gnttab_max_grant_frames()).
-  This property is unnecessary when booting Dom0 using ACPI.
+- reg: specifies the base physical address and size of the regions in memory
+  where the special resources should be mapped to, using an HYPERVISOR_memory_op
+  hypercall.
+  Region 0 is reserved for mapping grant table, it must be always present.
+  The memory region is large enough to map the whole grant table (it is larger
+  or equal to gnttab_max_grant_frames()).
+  Regions 1...N are extended regions (unused address space) for mapping foreign
+  GFNs and grants, they might be absent if there is nothing to expose.
 
 - interrupts: the interrupt used by Xen to inject event notifications.
   A GIC node is also required.
-  This property is unnecessary when booting Dom0 using ACPI.
 
 To support UEFI on Xen ARM virtual platforms, Xen populates the FDT "uefi" node
 under /hypervisor with following parameters:
diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml
index c73b1f5c7f49..969cfe6dc434 100644
--- a/Documentation/devicetree/bindings/arm/xilinx.yaml
+++ b/Documentation/devicetree/bindings/arm/xilinx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/xilinx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq Platforms Device Tree Bindings
+title: Xilinx Zynq Platforms
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
@@ -22,6 +22,9 @@ properties:
               - adapteva,parallella
               - digilent,zynq-zybo
               - digilent,zynq-zybo-z7
+              - ebang,ebaz4205
+              - myir,zynq-zturn-v5
+              - myir,zynq-zturn
               - xlnx,zynq-cc108
               - xlnx,zynq-zc702
               - xlnx,zynq-zc706
@@ -84,6 +87,7 @@ properties:
               - xlnx,zynqmp-zcu102-revA
               - xlnx,zynqmp-zcu102-revB
               - xlnx,zynqmp-zcu102-rev1.0
+              - xlnx,zynqmp-zcu102-rev1.1
           - const: xlnx,zynqmp-zcu102
           - const: xlnx,zynqmp
 
@@ -91,6 +95,7 @@ properties:
         items:
           - enum:
               - xlnx,zynqmp-zcu104-revA
+              - xlnx,zynqmp-zcu104-revC
               - xlnx,zynqmp-zcu104-rev1.0
           - const: xlnx,zynqmp-zcu104
           - const: xlnx,zynqmp
@@ -107,8 +112,26 @@ properties:
         items:
           - enum:
               - xlnx,zynqmp-zcu111-revA
-              - xlnx,zynqmp-zcu11-rev1.0
+              - xlnx,zynqmp-zcu111-rev1.0
           - const: xlnx,zynqmp-zcu111
           - const: xlnx,zynqmp
 
+      - description: Xilinx Kria SOMs
+        items:
+          - const: xlnx,zynqmp-sm-k26-rev1
+          - const: xlnx,zynqmp-sm-k26-revB
+          - const: xlnx,zynqmp-sm-k26-revA
+          - const: xlnx,zynqmp-sm-k26
+          - const: xlnx,zynqmp
+
+      - description: Xilinx Kria SOMs (starter)
+        items:
+          - const: xlnx,zynqmp-smk-k26-rev1
+          - const: xlnx,zynqmp-smk-k26-revB
+          - const: xlnx,zynqmp-smk-k26-revA
+          - const: xlnx,zynqmp-smk-k26
+          - const: xlnx,zynqmp
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/zte,sysctrl.txt b/Documentation/devicetree/bindings/arm/zte,sysctrl.txt
deleted file mode 100644
index 7e66b7f7ba96..000000000000
--- a/Documentation/devicetree/bindings/arm/zte,sysctrl.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-ZTE sysctrl Registers
-
-Registers for 'zte,zx296702' SoC:
-
-System management required properties:
-      - compatible = "zte,sysctrl"
-
-Low power management required properties:
-      - compatible = "zte,zx296702-pcu"
-
-Bus matrix required properties:
-      - compatible = "zte,zx-bus-matrix"
-
-
-Registers for 'zte,zx296718' SoC:
-
-System management required properties:
-      - compatible = "zte,zx296718-aon-sysctrl"
-      - compatible = "zte,zx296718-sysctrl"
-
-Example:
-aon_sysctrl: aon-sysctrl@116000 {
-	compatible = "zte,zx296718-aon-sysctrl", "syscon";
-	reg = <0x116000 0x1000>;
-};
-
-sysctrl: sysctrl@1463000 {
-	compatible = "zte,zx296718-sysctrl", "syscon";
-	reg = <0x1463000 0x1000>;
-};
diff --git a/Documentation/devicetree/bindings/arm/zte.yaml b/Documentation/devicetree/bindings/arm/zte.yaml
deleted file mode 100644
index 2d3fefdccdff..000000000000
--- a/Documentation/devicetree/bindings/arm/zte.yaml
+++ /dev/null
@@ -1,26 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/zte.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: ZTE platforms device tree bindings
-
-maintainers:
-  - Jun Nie <jun.nie@linaro.org>
-
-properties:
-  $nodename:
-    const: '/'
-  compatible:
-    oneOf:
-      - items:
-          - enum:
-              - zte,zx296702-ad1
-          - const: zte,zx296702
-      - items:
-          - enum:
-              - zte,zx296718-evb
-          - const: zte,zx296718
-
-...
diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
deleted file mode 100644
index 7561cc4de371..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Binding for CEVA AHCI SATA Controller
-
-Required properties:
-  - reg: Physical base address and size of the controller's register area.
-  - compatible: Compatibility string. Must be 'ceva,ahci-1v84'.
-  - clocks: Input clock specifier. Refer to common clock bindings.
-  - interrupts: Interrupt specifier. Refer to interrupt binding.
-  - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0.
-  - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
-			CINMP : COMINIT Negate Minimum Period.
-			CIBGN : COMINIT Burst Gap Nominal.
-			CIBGMX: COMINIT Burst Gap Maximum.
-			CIBGMN: COMINIT Burst Gap Minimum.
-  - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0.
-  - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
-			CWBGMN: COMWAKE Burst Gap Minimum.
-			CWBGMX: COMWAKE Burst Gap Maximum.
-			CWBGN: COMWAKE Burst Gap Nominal.
-			CWNMP: COMWAKE Negate Minimum Period.
-  - ceva,p0-burst-params: Burst timing value for COM parameter for port 0.
-  - ceva,p1-burst-params: Burst timing value for COM parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
-			BMX: COM Burst Maximum.
-			BNM: COM Burst Nominal.
-			SFD: Signal Failure Detection value.
-			PTST: Partial to Slumber timer value.
-  - ceva,p0-retry-params: Retry interval timing value for port 0.
-  - ceva,p1-retry-params: Retry interval timing value for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
-			RIT:  Retry Interval Timer.
-			RCT:  Rate Change Timer.
-
-Optional properties:
-  - ceva,broken-gen2: limit to gen1 speed instead of gen2.
-
-Examples:
-	ahci@fd0c0000 {
-		compatible = "ceva,ahci-1v84";
-		reg = <0xfd0c0000 0x200>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 133 4>;
-		clocks = <&clkc SATA_CLK_ID>;
-		ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-		ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-		ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-		ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
-
-		ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-		ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-		ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-		ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
-		ceva,broken-gen2;
-	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml
new file mode 100644
index 000000000000..94d72aeaad0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Serial ATA AHCI controllers
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+  - Damien Le Moal <damien.lemoal@opensource.wdc.com>
+
+description:
+  This document defines device tree properties for a common AHCI SATA
+  controller implementation. It's hardware interface is supposed to
+  conform to the technical standard defined by Intel (see Serial ATA
+  Advanced Host Controller Interface specification for details). The
+  document doesn't constitute a DT-node binding by itself but merely
+  defines a set of common properties for the AHCI-compatible devices.
+
+select: false
+
+allOf:
+  - $ref: sata-common.yaml#
+
+properties:
+  reg:
+    description:
+      Generic AHCI registers space conforming to the Serial ATA AHCI
+      specification.
+
+  reg-names:
+    description: CSR space IDs
+    contains:
+      const: ahci
+
+  interrupts:
+    description:
+      Generic AHCI state change interrupt. Can be implemented either as a
+      single line attached to the controller or as a set of the signals
+      indicating the particular port events.
+    minItems: 1
+    maxItems: 32
+
+  ahci-supply:
+    description: Power regulator for AHCI controller
+
+  target-supply:
+    description: Power regulator for SATA target device
+
+  phy-supply:
+    description: Power regulator for SATA PHY
+
+  phys:
+    description: Reference to the SATA PHY node
+    maxItems: 1
+
+  phy-names:
+    const: sata-phy
+
+  hba-cap:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description:
+      Bitfield of the HBA generic platform capabilities like Staggered
+      Spin-up or Mechanical Presence Switch support. It can be used to
+      appropriately initialize the HWinit fields of the HBA CAP register
+      in case if the system firmware hasn't done it.
+
+  ports-implemented:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description:
+      Mask that indicates which ports the HBA supports. Useful if PI is not
+      programmed by the BIOS, which is true for some embedded SoC's.
+
+patternProperties:
+  "^sata-port@[0-9a-f]+$":
+    $ref: '#/$defs/ahci-port'
+    description:
+      It is optionally possible to describe the ports as sub-nodes so
+      to enable each port independently when dealing with multiple PHYs.
+
+required:
+  - reg
+  - interrupts
+
+additionalProperties: true
+
+$defs:
+  ahci-port:
+    $ref: /schemas/ata/sata-common.yaml#/$defs/sata-port
+
+    properties:
+      reg:
+        description:
+          AHCI SATA port identifier. By design AHCI controller can't have
+          more than 32 ports due to the CAP.NP fields and PI register size
+          constraints.
+        minimum: 0
+        maximum: 31
+
+      phys:
+        description: Individual AHCI SATA port PHY
+        maxItems: 1
+
+      phy-names:
+        description: AHCI SATA port PHY ID
+        const: sata-phy
+
+      target-supply:
+        description: Power regulator for SATA port target device
+
+      hba-port-cap:
+        $ref: '/schemas/types.yaml#/definitions/uint32'
+        description:
+          Bitfield of the HBA port-specific platform capabilities like Hot
+          plugging, eSATA, FIS-based Switching, etc (see AHCI specification
+          for details). It can be used to initialize the HWinit fields of
+          the PxCMD register in case if the system firmware hasn't done it.
+
+    required:
+      - reg
+
+...
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
deleted file mode 100644
index 77091a277642..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-* AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-It is possible, but not required, to represent each port as a sub-node.
-It allows to enable each port independently when dealing with multiple
-PHYs.
-
-Required properties:
-- compatible        : compatible string, one of:
-  - "brcm,iproc-ahci"
-  - "hisilicon,hisi-ahci"
-  - "cavium,octeon-7130-ahci"
-  - "ibm,476gtr-ahci"
-  - "marvell,armada-380-ahci"
-  - "marvell,armada-3700-ahci"
-  - "snps,dwc-ahci"
-  - "snps,spear-ahci"
-  - "generic-ahci"
-- interrupts        : <interrupt mapping for SATA IRQ>
-- reg               : <registers mapping>
-
-Please note that when using "generic-ahci" you must also specify a SoC specific
-compatible:
-	compatible = "manufacturer,soc-model-ahci", "generic-ahci";
-
-Optional properties:
-- dma-coherent      : Present if dma operations are coherent
-- clocks            : a list of phandle + clock specifier pairs
-- resets            : a list of phandle + reset specifier pairs
-- target-supply     : regulator for SATA target power
-- phy-supply        : regulator for PHY power
-- phys              : reference to the SATA PHY node
-- phy-names         : must be "sata-phy"
-- ahci-supply       : regulator for AHCI controller
-- ports-implemented : Mask that indicates which ports that the HBA supports
-		      are available for software to use. Useful if PORTS_IMPL
-		      is not programmed by the BIOS, which is true with
-		      some embedded SOC's.
-
-Required properties when using sub-nodes:
-- #address-cells    : number of cells to encode an address
-- #size-cells       : number of cells representing the size of an address
-
-Sub-nodes required properties:
-- reg		    : the port number
-And at least one of the following properties:
-- phys		    : reference to the SATA PHY node
-- target-supply     : regulator for SATA target power
-
-Examples:
-        sata@ffe08000 {
-		compatible = "snps,spear-ahci";
-		reg = <0xffe08000 0x1000>;
-		interrupts = <115>;
-        };
-
-With sub-nodes:
-	sata@f7e90000 {
-		compatible = "marvell,berlin2q-achi", "generic-ahci";
-		reg = <0xe90000 0x1000>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&chip CLKID_SATA>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata0: sata-port@0 {
-			reg = <0>;
-			phys = <&sata_phy 0>;
-			target-supply = <&reg_sata0>;
-		};
-
-		sata1: sata-port@1 {
-			reg = <1>;
-			phys = <&sata_phy 1>;
-			target-supply = <&reg_sata1>;;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
new file mode 100644
index 000000000000..7dc2a2e8f598
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AHCI SATA Controller
+
+description: |
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+  It is possible, but not required, to represent each port as a sub-node.
+  It allows to enable each port independently when dealing with multiple
+  PHYs.
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+  - Jens Axboe <axboe@kernel.dk>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,iproc-ahci
+          - cavium,octeon-7130-ahci
+          - hisilicon,hisi-ahci
+          - ibm,476gtr-ahci
+          - marvell,armada-3700-ahci
+          - marvell,armada-8k-ahci
+          - marvell,berlin2q-ahci
+  required:
+    - compatible
+
+allOf:
+  - $ref: "ahci-common.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,iproc-ahci
+              - marvell,armada-8k-ahci
+              - marvell,berlin2-ahci
+              - marvell,berlin2q-ahci
+          - const: generic-ahci
+      - enum:
+          - cavium,octeon-7130-ahci
+          - hisilicon,hisi-ahci
+          - ibm,476gtr-ahci
+          - marvell,armada-3700-ahci
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^sata-port@[0-9a-f]+$":
+    $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
+
+    anyOf:
+      - required: [ phys ]
+      - required: [ target-supply ]
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@ffe08000 {
+        compatible = "snps,spear-ahci";
+        reg = <0xffe08000 0x1000>;
+        interrupts = <115>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/berlin2q.h>
+    #include <dt-bindings/ata/ahci.h>
+
+    sata@f7e90000 {
+        compatible = "marvell,berlin2q-ahci", "generic-ahci";
+        reg = <0xf7e90000 0x1000>;
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&chip CLKID_SATA>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hba-cap = <HBA_SMPS>;
+
+        sata0: sata-port@0 {
+            reg = <0>;
+
+            phys = <&sata_phy 0>;
+            target-supply = <&reg_sata0>;
+
+            hba-port-cap = <(HBA_PORT_FBSCP | HBA_PORT_ESP)>;
+        };
+
+        sata1: sata-port@1 {
+            reg = <1>;
+
+            phys = <&sata_phy 1>;
+            target-supply = <&reg_sata1>;
+
+            hba-port-cap = <(HBA_PORT_HPCP | HBA_PORT_MPSP | HBA_PORT_FBSCP)>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
new file mode 100644
index 000000000000..9b7ca4759bd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/baikal,bt1-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 SoC AHCI SATA controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  AHCI SATA controller embedded into the Baikal-T1 SoC is based on the
+  DWC AHCI SATA v4.10a IP-core.
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    const: baikal,bt1-ahci
+
+  clocks:
+    items:
+      - description: Peripheral APB bus clock
+      - description: Application AXI BIU clock
+      - description: SATA Ports reference clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk
+      - const: ref
+
+  resets:
+    items:
+      - description: Application AXI BIU domain reset
+      - description: SATA Ports clock domain reset
+
+  reset-names:
+    items:
+      - const: arst
+      - const: ref
+
+  ports-implemented:
+    maximum: 0x3
+
+patternProperties:
+  "^sata-port@[0-1]$":
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      snps,tx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Due to having AXI3 bus interface utilized the maximum Tx DMA
+          transaction size can't exceed 16 beats (AxLEN[3:0]).
+        enum: [ 1, 2, 4, 8, 16 ]
+
+      snps,rx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Due to having AXI3 bus interface utilized the maximum Rx DMA
+          transaction size can't exceed 16 beats (AxLEN[3:0]).
+        enum: [ 1, 2, 4, 8, 16 ]
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@1f050000 {
+      compatible = "baikal,bt1-ahci";
+      reg = <0x1f050000 0x2000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupts = <0 64 4>;
+
+      clocks = <&ccu_sys 1>, <&ccu_axi 2>, <&sata_ref_clk>;
+      clock-names = "pclk", "aclk", "ref";
+
+      resets = <&ccu_axi 2>, <&ccu_sys 0>;
+      reset-names = "arst", "ref";
+
+      ports-implemented = <0x3>;
+
+      sata-port@0 {
+        reg = <0>;
+
+        snps,tx-ts-max = <4>;
+        snps,rx-ts-max = <4>;
+      };
+
+      sata-port@1 {
+        reg = <1>;
+
+        snps,tx-ts-max = <4>;
+        snps,rx-ts-max = <4>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
deleted file mode 100644
index b9ae4ce4a0a0..000000000000
--- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Broadcom SATA3 AHCI Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible         : should be one or more of
-			"brcm,bcm7216-ahci"
-			"brcm,bcm7425-ahci"
-			"brcm,bcm7445-ahci"
-			"brcm,bcm-nsp-ahci"
-			"brcm,sata3-ahci"
-			"brcm,bcm63138-ahci"
-- reg                : register mappings for AHCI and SATA_TOP_CTRL
-- reg-names          : "ahci" and "top-ctrl"
-- interrupts         : interrupt mapping for SATA IRQ
-
-Optional properties:
-
-- reset: for "brcm,bcm7216-ahci" must be a valid reset phandle
-  pointing to the RESCAL reset controller provider node.
-- reset-names: for "brcm,bcm7216-ahci", must be "rescal".
-
-Also see ahci-platform.txt.
-
-Example:
-
-	sata@f045a000 {
-		compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
-		reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
-		reg-names = "ahci", "top-ctrl";
-		interrupts = <0 30 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata0: sata-port@0 {
-			reg = <0>;
-			phys = <&sata_phy 0>;
-		};
-
-		sata1: sata-port@1 {
-			reg = <1>;
-			phys = <&sata_phy 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
new file mode 100644
index 000000000000..fe7f091e744f
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/brcm,sata-brcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SATA3 AHCI Controller
+
+description:
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-ahci
+              - brcm,bcm7445-ahci
+              - brcm,bcm7425-ahci
+              - brcm,bcm63138-ahci
+          - const: brcm,sata3-ahci
+      - items:
+          - const: brcm,bcm-nsp-ahci
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ahci
+      - const: top-ctrl
+
+  interrupts:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm7216-ahci
+          - brcm,bcm63138-ahci
+then:
+  properties:
+    resets:
+      maxItems: 1
+    reset-names:
+      enum:
+        - rescal
+        - ahci
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@f045a000 {
+        compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+        reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
+        reg-names = "ahci", "top-ctrl";
+        interrupts = <0 30 0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sata0: sata-port@0 {
+            reg = <0>;
+            phys = <&sata_phy 0>;
+        };
+
+        sata1: sata-port@1 {
+            reg = <1>;
+            phys = <&sata_phy 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
new file mode 100644
index 000000000000..9b31f864e071
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ceva,ahci-1v84.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ceva AHCI SATA Controller
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@xilinx.com>
+
+description: |
+  The Ceva SATA controller mostly conforms to the AHCI interface with some
+  special extensions to add functionality, is a high-performance dual-port
+  SATA host controller with an AHCI compliant command layer which supports
+  advanced features such as native command queuing and frame information
+  structure (FIS) based switching for systems employing port multipliers.
+
+properties:
+  compatible:
+    const: ceva,ahci-1v84
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ceva,p0-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p0-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p0-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p0-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,p1-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p1-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p1-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p1-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,broken-gen2:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      limit to gen1 speed instead of gen2.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: sata-phy
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - ceva,p0-cominit-params
+  - ceva,p0-comwake-params
+  - ceva,p0-burst-params
+  - ceva,p0-retry-params
+  - ceva,p1-cominit-params
+  - ceva,p1-comwake-params
+  - ceva,p1-burst-params
+  - ceva,p1-retry-params
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/phy/phy.h>
+
+    sata: ahci@fd0c0000 {
+        compatible = "ceva,ahci-1v84";
+        reg = <0xfd0c0000 0x200>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&zynqmp_clk SATA_REF>;
+        ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,broken-gen2;
+        phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
+        resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
deleted file mode 100644
index 1c3d3cc70051..000000000000
--- a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Cortina Systems Gemini SATA Bridge
-
-The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
-takes two Faraday Technology FTIDE010 PATA controllers and bridges
-them in different configurations to two SATA ports.
-
-Required properties:
-- compatible: should be
-  "cortina,gemini-sata-bridge"
-- reg: registers and size for the block
-- resets: phandles to the reset lines for both SATA bridges
-- reset-names: must be "sata0", "sata1"
-- clocks: phandles to the compulsory peripheral clocks
-- clock-names: must be "SATA0_PCLK", "SATA1_PCLK"
-- syscon: a phandle to the global Gemini system controller
-- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for
-  the ATA controller and SATA bridges. Values 0..3:
-  Mode 0: ata0 master <-> sata0
-          ata1 master <-> sata1
-          ata0 slave interface brought out on IDE pads
-  Mode 1: ata0 master <-> sata0
-          ata1 master <-> sata1
-          ata1 slave interface brought out on IDE pads
-  Mode 2: ata1 master <-> sata1
-          ata1 slave  <-> sata0
-          ata0 master and slave interfaces brought out
-               on IDE pads
-  Mode 3: ata0 master <-> sata0
-          ata0 slave  <-> sata1
-          ata1 master and slave interfaces brought out
-               on IDE pads
-
-Optional boolean properties:
-- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection.
-  The muxmode setting decides whether ATA0 or ATA1 is brought out,
-  and whether master, slave or both interfaces get brought out.
-- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge
-  inside the Gemnini SoC. The Muxmode decides what PATA blocks will
-  be muxed out and how.
-
-Example:
-
-sata: sata@46000000 {
-	compatible = "cortina,gemini-sata-bridge";
-	reg = <0x46000000 0x100>;
-	resets = <&rcon 26>, <&rcon 27>;
-	reset-names = "sata0", "sata1";
-	clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
-		 <&gcc GEMINI_CLK_GATE_SATA1>;
-	clock-names = "SATA0_PCLK", "SATA1_PCLK";
-	syscon = <&syscon>;
-	cortina,gemini-ata-muxmode = <3>;
-	cortina,gemini-enable-ide-pins;
-	cortina,gemini-enable-sata-bridge;
-};
diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
new file mode 100644
index 000000000000..529093666508
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/cortina,gemini-sata-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortina Systems Gemini SATA Bridge
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+    The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
+    takes two Faraday Technology FTIDE010 PATA controllers and bridges
+    them in different configurations to two SATA ports.
+
+properties:
+  compatible:
+    const: cortina,gemini-sata-bridge
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+    description: phandles to the reset lines for both SATA bridges
+
+  reset-names:
+    items:
+      - const: sata0
+      - const: sata1
+
+  clocks:
+    maxItems: 2
+    description: phandles to the compulsory peripheral clocks
+
+  clock-names:
+    items:
+      - const: SATA0_PCLK
+      - const: SATA1_PCLK
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the global Gemini system controller
+
+  cortina,gemini-ata-muxmode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0
+      - 1
+      - 2
+      - 3
+    description: |
+      Tell the desired multiplexing mode for the ATA controller and SATA
+      bridges.
+      Mode 0: ata0 master <-> sata0
+              ata1 master <-> sata1
+              ata0 slave interface brought out on IDE pads
+      Mode 1: ata0 master <-> sata0
+              ata1 master <-> sata1
+              ata1 slave interface brought out on IDE pads
+      Mode 2: ata1 master <-> sata1
+              ata1 slave  <-> sata0
+              ata0 master and slave interfaces brought out on IDE pads
+      Mode 3: ata0 master <-> sata0
+              ata0 slave  <-> sata1
+              ata1 master and slave interfaces brought out on IDE pads
+
+  cortina,gemini-enable-ide-pins:
+    type: boolean
+    description: Enables the PATA to IDE connection.
+      The muxmode setting decides whether ATA0 or ATA1 is brought out,
+      and whether master, slave or both interfaces get brought out.
+
+  cortina,gemini-enable-sata-bridge:
+    type: boolean
+    description: Enables the PATA to SATA bridge inside the Gemnini SoC.
+      The Muxmode decides what PATA blocks will be muxed out and how.
+
+required:
+  - clocks
+  - clock-names
+  - cortina,gemini-ata-muxmode
+  - resets
+  - reset-names
+  - compatible
+  - reg
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    sata@46000000 {
+      compatible = "cortina,gemini-sata-bridge";
+      reg = <0x46000000 0x100>;
+      resets = <&rcon 26>, <&rcon 27>;
+      reset-names = "sata0", "sata1";
+      clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
+               <&gcc GEMINI_CLK_GATE_SATA1>;
+      clock-names = "SATA0_PCLK", "SATA1_PCLK";
+      syscon = <&syscon>;
+      cortina,gemini-ata-muxmode = <3>;
+      cortina,gemini-enable-ide-pins;
+      cortina,gemini-enable-sata-bridge;
+    };
diff --git a/Documentation/devicetree/bindings/ata/exynos-sata.txt b/Documentation/devicetree/bindings/ata/exynos-sata.txt
deleted file mode 100644
index cb48448247ea..000000000000
--- a/Documentation/devicetree/bindings/ata/exynos-sata.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Samsung AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible		: compatible list, contains "samsung,exynos5-sata"
-- interrupts		: <interrupt mapping for SATA IRQ>
-- reg			: <registers mapping>
-- samsung,sata-freq	: <frequency in MHz>
-- phys			: Must contain exactly one entry as specified
-			  in phy-bindings.txt
-- phy-names		: Must be "sata-phy"
-
-Optional properties:
-- clocks		: Must contain an entry for each entry in clock-names.
-- clock-names		: Shall be "sata" for the external SATA bus clock,
-			  and "sclk_sata" for the internal controller clock.
-
-Example:
-	sata@122f0000 {
-		compatible = "snps,dwc-ahci";
-		samsung,sata-freq = <66>;
-		reg = <0x122f0000 0x1ff>;
-		interrupts = <0 115 0>;
-		clocks = <&clock 277>, <&clock 143>;
-		clock-names = "sata", "sclk_sata";
-		phys = <&sata_phy>;
-		phy-names = "sata-phy";
-	};
diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
index bfc6357476fd..fa16f3767c6a 100644
--- a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
+++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
@@ -26,8 +26,8 @@ properties:
     oneOf:
       - const: faraday,ftide010
       - items:
-        - const: cortina,gemini-pata
-        - const: faraday,ftide010
+          - const: cortina,gemini-pata
+          - const: faraday,ftide010
 
   reg:
     maxItems: 1
@@ -64,6 +64,8 @@ allOf:
       required:
         - sata
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/ata/imx-sata.txt b/Documentation/devicetree/bindings/ata/imx-sata.txt
deleted file mode 100644
index 781f88751762..000000000000
--- a/Documentation/devicetree/bindings/ata/imx-sata.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Freescale i.MX AHCI SATA Controller
-
-The Freescale i.MX SATA controller mostly conforms to the AHCI interface
-with some special extensions at integration level.
-
-Required properties:
-- compatible : should be one of the following:
-   - "fsl,imx53-ahci" for i.MX53 SATA controller
-   - "fsl,imx6q-ahci" for i.MX6Q SATA controller
-   - "fsl,imx6qp-ahci" for i.MX6QP SATA controller
-- interrupts : interrupt mapping for SATA IRQ
-- reg : registers mapping
-- clocks : list of clock specifiers, must contain an entry for each
-  required entry in clock-names
-- clock-names : should include "sata", "sata_ref" and "ahb" entries
-
-Optional properties:
-- fsl,transmit-level-mV : transmit voltage level, in millivolts.
-- fsl,transmit-boost-mdB : transmit boost level, in milli-decibels
-- fsl,transmit-atten-16ths : transmit attenuation, in 16ths
-- fsl,receive-eq-mdB : receive equalisation, in milli-decibels
-  Please refer to the technical documentation or the driver source code
-  for the list of legal values for these options.
-- fsl,no-spread-spectrum : disable spread-spectrum clocking on the SATA
-  link.
-
-Examples:
-
-sata@2200000 {
-	compatible = "fsl,imx6q-ahci";
-	reg = <0x02200000 0x4000>;
-	interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks IMX6QDL_CLK_SATA>,
-		 <&clks IMX6QDL_CLK_SATA_REF_100M>,
-		 <&clks IMX6QDL_CLK_AHB>;
-	clock-names = "sata", "sata_ref", "ahb";
-};
diff --git a/Documentation/devicetree/bindings/ata/imx-sata.yaml b/Documentation/devicetree/bindings/ata/imx-sata.yaml
new file mode 100644
index 000000000000..68ffb97ddc9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/imx-sata.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/imx-sata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX AHCI SATA Controller
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Freescale i.MX SATA controller mostly conforms to the AHCI interface
+  with some special extensions at integration level.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx53-ahci
+      - fsl,imx6q-ahci
+      - fsl,imx6qp-ahci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: sata clock
+      - description: sata reference clock
+      - description: ahb clock
+
+  clock-names:
+    items:
+      - const: sata
+      - const: sata_ref
+      - const: ahb
+
+  fsl,transmit-level-mV:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: transmit voltage level, in millivolts.
+
+  fsl,transmit-boost-mdB:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: transmit boost level, in milli-decibels.
+
+  fsl,transmit-atten-16ths:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: transmit attenuation, in 16ths.
+
+  fsl,receive-eq-mdB:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: receive equalisation, in milli-decibels.
+
+  fsl,no-spread-spectrum:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: if present, disable spread-spectrum clocking on the SATA link.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sata@2200000 {
+        compatible = "fsl,imx6q-ahci";
+        reg = <0x02200000 0x4000>;
+        interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_SATA>,
+                 <&clks IMX6QDL_CLK_SATA_REF_100M>,
+                 <&clks IMX6QDL_CLK_AHB>;
+        clock-names = "sata", "sata_ref", "ahb";
+    };
diff --git a/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
new file mode 100644
index 000000000000..52e18600ecff
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/intel,ixp4xx-compact-flash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx CompactFlash Card Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The IXP4xx network processors have a CompactFlash interface that presents
+  a CompactFlash card to the system as a true IDE (parallel ATA) device. The
+  device is always connected to the expansion bus of the IXP4xx SoCs using one
+  or two chip select areas and address translating logic on the board. The
+  node must be placed inside a chip select node on the IXP4xx expansion bus.
+
+properties:
+  compatible:
+    const: intel,ixp4xx-compact-flash
+
+  reg:
+    items:
+      - description: Command interface registers
+      - description: Control interface registers
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: pata-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bus@c4000000 {
+      compatible = "intel,ixp43x-expansion-bus-controller", "syscon";
+      reg = <0xc4000000 0x1000>;
+      native-endian;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      ranges = <0 0x0 0x50000000 0x01000000>, <1 0x0 0x51000000 0x01000000>;
+      dma-ranges = <0 0x0 0x50000000 0x01000000>, <1 0x0 0x51000000 0x01000000>;
+      ide@1,0 {
+        compatible = "intel,ixp4xx-compact-flash";
+        reg = <1 0x00000000 0x1000>, <1 0x00040000 0x1000>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml
new file mode 100644
index 000000000000..3c7a2425f3e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/nvidia,tegra-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra AHCI SATA Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra124-ahci
+      - nvidia,tegra132-ahci
+      - nvidia,tegra210-ahci
+      - nvidia,tegra186-ahci
+
+  reg:
+    minItems: 2
+    items:
+      - description: AHCI registers
+      - description: SATA configuration and IPFS registers
+      - description: SATA AUX registers
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sata
+      - const: sata-oob
+
+  clocks:
+    maxItems: 2
+
+  reset-names:
+    minItems: 2
+    items:
+      - const: sata
+      - const: sata-cold
+      - const: sata-oob
+
+  resets:
+    minItems: 2
+    maxItems: 3
+
+  iommus:
+    maxItems: 1
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+  interconnects:
+    maxItems: 2
+
+  power-domains:
+    items:
+      - description: SAX power-domain
+
+  phy-names:
+    items:
+      - const: sata-0
+
+  phys:
+    maxItems: 1
+
+  hvdd-supply:
+    description: SATA HVDD regulator supply.
+
+  vddio-supply:
+    description: SATA VDDIO regulator supply.
+
+  avdd-supply:
+    description: SATA AVDD regulator supply.
+
+  target-5v-supply:
+    description: SATA 5V power regulator supply.
+
+  target-12v-supply:
+    description: SATA 12V power regulator supply.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - reset-names
+  - resets
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra124-ahci
+              - nvidia,tegra132-ahci
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reset-names:
+          minItems: 3
+        resets:
+          minItems: 3
+      required:
+        - phys
+        - phy-names
+        - hvdd-supply
+        - vddio-supply
+        - avdd-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra210-ahci
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reset-names:
+          minItems: 3
+        resets:
+          minItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-ahci
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reset-names:
+          maxItems: 2
+        resets:
+          maxItems: 2
+      required:
+        - iommus
+        - interconnect-names
+        - interconnects
+        - power-domains
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/reset/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sata@70020000 {
+            compatible = "nvidia,tegra210-ahci";
+            reg = <0x70027000 0x00002000>, /* AHCI */
+                  <0x70020000 0x00007000>, /* SATA */
+                  <0x70001100 0x00010000>; /* SATA AUX */
+            interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&tegra_car TEGRA210_CLK_SATA>,
+                     <&tegra_car TEGRA210_CLK_SATA_OOB>;
+            clock-names = "sata", "sata-oob";
+            resets = <&tegra_car 124>,
+                     <&tegra_car 129>,
+                     <&tegra_car 123>;
+            reset-names = "sata", "sata-cold", "sata-oob";
+    };
diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
deleted file mode 100644
index 12ab2f723eb0..000000000000
--- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Tegra SoC SATA AHCI controller
-
-Required properties :
-- compatible : Must be one of:
-  - Tegra124 : "nvidia,tegra124-ahci"
-  - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci"
-  - Tegra210 : "nvidia,tegra210-ahci"
-- reg : Should contain 2 entries:
-  - AHCI register set (SATA BAR5)
-  - SATA register set
-- interrupts : Defines the interrupt used by SATA
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - sata
-  - sata-oob
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - sata
-  - sata-oob
-  - sata-cold
-- phys : Must contain an entry for each entry in phy-names.
-  See ../phy/phy-bindings.txt for details.
-- phy-names : Must include the following entries:
-  - For Tegra124 and Tegra132:
-    - sata-phy : XUSB PADCTL SATA PHY
-- For Tegra124 and Tegra132:
-  - hvdd-supply : Defines the SATA HVDD regulator
-  - vddio-supply : Defines the SATA VDDIO regulator
-  - avdd-supply : Defines the SATA AVDD regulator
-  - target-5v-supply : Defines the SATA 5V power regulator
-  - target-12v-supply : Defines the SATA 12V power regulator
-
-Optional properties:
-- reg :
-  - AUX register set
-- clock-names :
-  - cml1 :
-    cml1 clock should be defined here if the PHY driver
-    doesn't manage them. If it does, they should not be.
-- phy-names :
-  - For T210:
-    - sata-phy
diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml
index fc5ebbe7108d..2412894a255d 100644
--- a/Documentation/devicetree/bindings/ata/pata-common.yaml
+++ b/Documentation/devicetree/bindings/ata/pata-common.yaml
@@ -47,4 +47,6 @@ patternProperties:
           The ID number of the drive port, 0 for the master port and 1 for the
           slave port.
 
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
new file mode 100644
index 000000000000..c4e4a9eab658
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas R-Car Serial-ATA Interface
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,sata-r8a7779      # R-Car H1
+      - items:
+          - enum:
+              - renesas,sata-r8a7742      # RZ/G1H
+              - renesas,sata-r8a7790-es1  # R-Car H2 ES1
+              - renesas,sata-r8a7790      # R-Car H2 other than ES1
+              - renesas,sata-r8a7791      # R-Car M2-W
+              - renesas,sata-r8a7793      # R-Car M2-N
+          - const: renesas,rcar-gen2-sata # generic R-Car Gen2
+      - items:
+          - enum:
+              - renesas,sata-r8a774b1     # RZ/G2N
+              - renesas,sata-r8a774e1     # RZ/G2H
+              - renesas,sata-r8a7795      # R-Car H3
+              - renesas,sata-r8a77965     # R-Car M3-N
+          - const: renesas,rcar-gen3-sata # generic R-Car Gen3 or RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: renesas,sata-r8a7779
+then:
+  required:
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    sata@ee300000 {
+            compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
+            reg = <0xee300000 0x200000>;
+            interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 815>;
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 815>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml
index 6783a4dec6b5..58c9342b9925 100644
--- a/Documentation/devicetree/bindings/ata/sata-common.yaml
+++ b/Documentation/devicetree/bindings/ata/sata-common.yaml
@@ -31,20 +31,27 @@ properties:
   "#size-cells":
     const: 0
 
+  dma-coherent: true
+
 patternProperties:
   "^sata-port@[0-9a-e]$":
+    $ref: '#/$defs/sata-port'
     description: |
       DT nodes for ports connected on the SATA host. The SATA port
       nodes will be named "sata-port".
+
+additionalProperties: true
+
+$defs:
+  sata-port:
     type: object
 
     properties:
       reg:
         minimum: 0
-        maximum: 14
         description:
-          The ID number of the drive port SATA can potentially use a port
-          multiplier making it possible to connect up to 15 disks to a single
-          SATA port.
+          The ID number of the SATA port. Aside with being directly used,
+          each port can have a Port Multiplier attached thus allowing to
+          access more than one drive by means of a single SATA port.
 
 ...
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt
deleted file mode 100644
index aa83407cb7a4..000000000000
--- a/Documentation/devicetree/bindings/ata/sata_highbank.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* Calxeda AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-The Calxeda SATA controller mostly conforms to the AHCI interface
-with some special extensions to add functionality.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci"
-- interrupts        : <interrupt mapping for SATA IRQ>
-- reg               : <registers mapping>
-
-Optional properties:
-- dma-coherent      : Present if dma operations are coherent
-- calxeda,port-phys : phandle-combophy and lane assignment, which maps each
-			SATA port to a combophy and a lane within that
-			combophy
-- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
-			which indicates that the driver supports SGPIO
-			indicator lights using the indicated GPIOs
-- calxeda,led-order : a u32 array that map port numbers to offsets within the
-			SGPIO bitstream.
-- calxeda,tx-atten  : a u32 array that contains TX attenuation override
-			codes, one per port. The upper 3 bytes are always
-			0 and thus ignored.
-- calxeda,pre-clocks : a u32 that indicates the number of additional clock
-			cycles to transmit before sending an SGPIO pattern
-- calxeda,post-clocks: a u32 that indicates the number of additional clock
-			cycles to transmit after sending an SGPIO pattern
-
-Example:
-        sata@ffe08000 {
-		compatible = "calxeda,hb-ahci";
-		reg = <0xffe08000 0x1000>;
-		interrupts = <115>;
-		dma-coherent;
-		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
-					&combophy0 2 &combophy0 3>;
-		calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
-		calxeda,led-order = <4 0 1 2 3>;
-		calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
-		calxeda,pre-clocks = <10>;
-		calxeda,post-clocks = <0>;
-        };
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
new file mode 100644
index 000000000000..f23f26a8f21c
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/sata_highbank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda AHCI SATA Controller
+
+description: |
+  The Calxeda SATA controller mostly conforms to the AHCI interface
+  with some special extensions to add functionality, to map GPIOs for
+  activity LEDs and for mapping the ComboPHYs.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: calxeda,hb-ahci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dma-coherent: true
+
+  calxeda,pre-clocks:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Indicates the number of additional clock cycles to transmit before
+      sending an SGPIO pattern.
+
+  calxeda,post-clocks:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Indicates the number of additional clock cycles to transmit after
+      sending an SGPIO pattern.
+
+  calxeda,led-order:
+    description: Maps port numbers to offsets within the SGPIO bitstream.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  calxeda,port-phys:
+    description: |
+      phandle-combophy and lane assignment, which maps each SATA port to a
+      combophy and a lane within that combophy
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 8
+    items:
+      maxItems: 2
+
+  calxeda,tx-atten:
+    description: |
+      Contains TX attenuation override codes, one per port.
+      The upper 24 bits of each entry are always 0 and thus ignored.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  calxeda,sgpio-gpio:
+    maxItems: 3
+    description: |
+      phandle-gpio bank, bit offset, and default on or off, which indicates
+      that the driver supports SGPIO indicator lights using the indicated
+      GPIOs.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    sata@ffe08000 {
+        compatible = "calxeda,hb-ahci";
+        reg = <0xffe08000 0x1000>;
+        interrupts = <115>;
+        dma-coherent;
+        calxeda,port-phys = <&combophy5 0>, <&combophy0 0>, <&combophy0 1>,
+                             <&combophy0 2>, <&combophy0 3>;
+        calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>, <&gpioh 7 1>;
+        calxeda,led-order = <4 0 1 2 3>;
+        calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
+        calxeda,pre-clocks = <10>;
+        calxeda,post-clocks = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt
deleted file mode 100644
index a2fbdc91570d..000000000000
--- a/Documentation/devicetree/bindings/ata/sata_rcar.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Renesas R-Car SATA
-
-Required properties:
-- compatible		: should contain one or more of the following:
-			  - "renesas,sata-r8a774b1" for RZ/G2N
-			  - "renesas,sata-r8a7779" for R-Car H1
-			  - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
-			  - "renesas,sata-r8a7790" for R-Car H2 other than ES1
-			  - "renesas,sata-r8a7791" for R-Car M2-W
-			  - "renesas,sata-r8a7793" for R-Car M2-N
-			  - "renesas,sata-r8a7795" for R-Car H3
-			  - "renesas,sata-r8a77965" for R-Car M3-N
-			  - "renesas,rcar-gen2-sata" for a generic R-Car Gen2
-			     compatible device
-			  - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 or
-			     RZ/G2 compatible device
-			  - "renesas,rcar-sata" is deprecated
-
-			  When compatible with the generic version nodes
-			  must list the SoC-specific version corresponding
-			  to the platform first followed by the generic
-			  version.
-
-- reg			: address and length of the SATA registers;
-- interrupts		: must consist of one interrupt specifier.
-- clocks		: must contain a reference to the functional clock.
-
-Example:
-
-sata0: sata@ee300000 {
-	compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
-	reg = <0 0xee300000 0 0x2000>;
-	interrupt-parent = <&gic>;
-	interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
-};
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
new file mode 100644
index 000000000000..c1457910520b
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller properties
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree schema for the generic Synopsys DWC
+  AHCI controller properties.
+
+select: false
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Basic DWC AHCI SATA clock sources like application AXI/AHB BIU clock,
+      PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx)
+      clock, etc.
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      oneOf:
+        - description: Application APB/AHB/AXI BIU clock
+          enum:
+            - pclk
+            - aclk
+            - hclk
+            - sata
+        - description: Power Module keep-alive clock
+          const: pmalive
+        - description: RxOOB detection clock
+          const: rxoob
+        - description: SATA Ports reference clock
+          const: ref
+
+  resets:
+    description:
+      At least basic application and reference clock domains resets are
+      normally supported by the DWC AHCI SATA controller.
+    minItems: 1
+    maxItems: 4
+
+  reset-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      oneOf:
+        - description: Application AHB/AXI BIU clock domain reset control
+          enum:
+            - arst
+            - hrst
+        - description: Power Module keep-alive clock domain reset control
+          const: pmalive
+        - description: RxOOB detection clock domain reset control
+          const: rxoob
+        - description: Reference clock domain reset control
+          const: ref
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: '#/$defs/dwc-ahci-port'
+
+additionalProperties: true
+
+$defs:
+  dwc-ahci-port:
+    $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      snps,tx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Tx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+      snps,rx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Rx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+...
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
new file mode 100644
index 000000000000..5afa4b57ce20
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree bindings for the generic Synopsys DWC
+  implementation of the AHCI SATA controller.
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: Synopsys AHCI SATA-compatible devices
+        const: snps,dwc-ahci
+      - description: SPEAr1340 AHCI SATA device
+        const: snps,spear-ahci
+      - description: Rockhip RK3568 AHCI controller
+        items:
+          - const: rockchip,rk3568-dwc-ahci
+          - const: snps,dwc-ahci
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/ata/ahci.h>
+
+    sata@122f0000 {
+      compatible = "snps,dwc-ahci";
+      reg = <0x122F0000 0x1ff>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&clock1>, <&clock2>;
+      clock-names = "aclk", "ref";
+
+      phys = <&sata_phy>;
+      phy-names = "sata-phy";
+
+      ports-implemented = <0x1>;
+
+      sata-port@0 {
+        reg = <0>;
+
+        hba-port-cap = <HBA_PORT_FBSCP>;
+
+        snps,tx-ts-max = <512>;
+        snps,rx-ts-max = <512>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
new file mode 100644
index 000000000000..5d02bd032a85
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/arm,versatile-lcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Character LCD
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Rob Herring <robh@kernel.org>
+
+description:
+  This binding defines the character LCD interface found on ARM Versatile AB
+  and PB reference platforms.
+
+properties:
+  compatible:
+    const: arm,versatile-lcd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    lcd@10008000 {
+            compatible = "arm,versatile-lcd";
+            reg = <0x10008000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt b/Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt
deleted file mode 100644
index e28e2aac47f1..000000000000
--- a/Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-ARM Versatile Character LCD
------------------------------------------------------
-This binding defines the character LCD interface found on ARM Versatile AB
-and PB reference platforms.
-
-Required properties:
-- compatible : "arm,versatile-clcd"
-- reg : Location and size of character LCD registers
-
-Optional properties:
-- interrupts - single interrupt for character LCD. The character LCD can
-  operate in polled mode without an interrupt.
-
-Example:
-	lcd@10008000 {
-		compatible = "arm,versatile-lcd";
-		reg = <0x10008000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt
deleted file mode 100644
index 2aa24b889923..000000000000
--- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-DT bindings for the Hitachi HD44780 Character LCD Controller
-
-The Hitachi HD44780 Character LCD Controller is commonly used on character LCDs
-that can display one or more lines of text. It exposes an M6800 bus interface,
-which can be used in either 4-bit or 8-bit mode.
-
-Required properties:
-  - compatible: Must contain "hit,hd44780",
-  - data-gpios: Must contain an array of either 4 or 8 GPIO specifiers,
-    referring to the GPIO pins connected to the data signal lines DB0-DB7
-    (8-bit mode) or DB4-DB7 (4-bit mode) of the LCD Controller's bus interface,
-  - enable-gpios: Must contain a GPIO specifier, referring to the GPIO pin
-    connected to the "E" (Enable) signal line of the LCD Controller's bus
-    interface,
-  - rs-gpios: Must contain a GPIO specifier, referring to the GPIO pin
-    connected to the "RS" (Register Select) signal line of the LCD Controller's
-    bus interface,
-  - display-height-chars: Height of the display, in character cells,
-  - display-width-chars: Width of the display, in character cells.
-
-Optional properties:
-  - rw-gpios: Must contain a GPIO specifier, referring to the GPIO pin
-    connected to the "RW" (Read/Write) signal line of the LCD Controller's bus
-    interface,
-  - backlight-gpios: Must contain a GPIO specifier, referring to the GPIO pin
-    used for enabling the LCD's backlight,
-  - internal-buffer-width: Internal buffer width (default is 40 for displays
-    with 1 or 2 lines, and display-width-chars for displays with more than 2
-    lines).
-
-Example:
-
-	auxdisplay {
-		compatible = "hit,hd44780";
-
-		data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
-			     <&hc595 1 GPIO_ACTIVE_HIGH>,
-			     <&hc595 2 GPIO_ACTIVE_HIGH>,
-			     <&hc595 3 GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-		rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-
-		display-height-chars = <2>;
-		display-width-chars = <16>;
-	};
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
new file mode 100644
index 000000000000..fde07e4b119d
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/hit,hd44780.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hitachi HD44780 Character LCD Controller
+
+maintainers:
+  - Geert Uytterhoeven <geert@linux-m68k.org>
+
+description:
+  The Hitachi HD44780 Character LCD Controller is commonly used on character
+  LCDs that can display one or more lines of text. It exposes an M6800 bus
+  interface, which can be used in either 4-bit or 8-bit mode. By using a
+  GPIO expander it is possible to use the driver with one of the popular I2C
+  expander boards based on the PCF8574 available for these displays. For
+  an example see below.
+
+properties:
+  compatible:
+    const: hit,hd44780
+
+  data-gpios:
+    description:
+      GPIO pins connected to the data signal lines DB0-DB7 (8-bit mode) or
+      DB4-DB7 (4-bit mode) of the LCD Controller's bus interface.
+    oneOf:
+      - maxItems: 4
+      - maxItems: 8
+
+  enable-gpios:
+    description:
+      GPIO pin connected to the "E" (Enable) signal line of the LCD
+      Controller's bus interface.
+    maxItems: 1
+
+  rs-gpios:
+    description:
+      GPIO pin connected to the "RS" (Register Select) signal line of the LCD
+      Controller's bus interface.
+    maxItems: 1
+
+  rw-gpios:
+    description:
+      GPIO pin connected to the "RW" (Read/Write) signal line of the LCD
+      Controller's bus interface.
+    maxItems: 1
+
+  backlight-gpios:
+    description: GPIO pin used for enabling the LCD's backlight.
+    maxItems: 1
+
+  display-height-chars:
+    description: Height of the display, in character cells,
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+
+  display-width-chars:
+    description: Width of the display, in character cells.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 64
+
+  internal-buffer-width:
+    description:
+      Internal buffer width (default is 40 for displays with 1 or 2 lines, and
+      display-width-chars for displays with more than 2 lines).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 64
+
+required:
+  - compatible
+  - data-gpios
+  - enable-gpios
+  - rs-gpios
+  - display-height-chars
+  - display-width-chars
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    auxdisplay {
+            compatible = "hit,hd44780";
+
+            data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
+                         <&hc595 1 GPIO_ACTIVE_HIGH>,
+                         <&hc595 2 GPIO_ACTIVE_HIGH>,
+                         <&hc595 3 GPIO_ACTIVE_HIGH>;
+            enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+            rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+
+            display-height-chars = <2>;
+            display-width-chars = <16>;
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pcf8574: pcf8574@27 {
+                    compatible = "nxp,pcf8574";
+                    reg = <0x27>;
+                    gpio-controller;
+                    #gpio-cells = <2>;
+            };
+    };
+    hd44780 {
+            compatible = "hit,hd44780";
+            display-height-chars = <2>;
+            display-width-chars  = <16>;
+            data-gpios = <&pcf8574 4 0>,
+                         <&pcf8574 5 0>,
+                         <&pcf8574 6 0>,
+                         <&pcf8574 7 0>;
+            enable-gpios = <&pcf8574 2 0>;
+            rs-gpios = <&pcf8574 0 0>;
+            rw-gpios = <&pcf8574 1 0>;
+            backlight-gpios = <&pcf8574 3 0>;
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
new file mode 100644
index 000000000000..fc4873deb76f
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/holtek,ht16k33.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Holtek HT16K33 RAM mapping 16*8 LED controller with keyscan
+
+maintainers:
+  - Robin van der Gracht <robin@protonic.nl>
+
+allOf:
+  - $ref: "/schemas/input/matrix-keymap.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - adafruit,3108  # 0.56" 4-Digit 7-Segment FeatherWing Display (Red)
+              - adafruit,3130  # 0.54" Quad Alphanumeric FeatherWing Display (Red)
+          - const: holtek,ht16k33
+
+      - const: holtek,ht16k33     # Generic 16*8 LED controller with dot-matrix display
+
+  reg:
+    maxItems: 1
+
+  refresh-rate-hz:
+    maxItems: 1
+    description: Display update interval in Hertz for dot-matrix displays
+
+  interrupts:
+    maxItems: 1
+
+  debounce-delay-ms:
+    maxItems: 1
+    description: Debouncing interval time in milliseconds
+
+  linux,keymap: true
+
+  linux,no-autorepeat:
+    description: Disable keyrepeat
+
+  default-brightness-level:
+    minimum: 1
+    maximum: 16
+    default: 16
+    description: Initial brightness level
+
+  led:
+    type: object
+    $ref: /schemas/leds/common.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      const: holtek,ht16k33
+then:
+  required:
+    - refresh-rate-hz
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/leds/common.h>
+    i2c1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ht16k33: ht16k33@70 {
+                    compatible = "holtek,ht16k33";
+                    reg = <0x70>;
+                    refresh-rate-hz = <20>;
+                    interrupt-parent = <&gpio4>;
+                    interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+                    debounce-delay-ms = <50>;
+                    linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
+                                   <MATRIX_KEY(3, 0, KEY_F8)>,
+                                   <MATRIX_KEY(4, 0, KEY_F10)>,
+                                   <MATRIX_KEY(5, 0, KEY_F4)>,
+                                   <MATRIX_KEY(6, 0, KEY_F2)>,
+                                   <MATRIX_KEY(2, 1, KEY_F5)>,
+                                   <MATRIX_KEY(3, 1, KEY_F7)>,
+                                   <MATRIX_KEY(4, 1, KEY_F9)>,
+                                   <MATRIX_KEY(5, 1, KEY_F3)>,
+                                   <MATRIX_KEY(6, 1, KEY_F1)>;
+
+                    led {
+                            color = <LED_COLOR_ID_RED>;
+                            function = LED_FUNCTION_BACKLIGHT;
+                            linux,default-trigger = "backlight";
+                    };
+            };
+      };
diff --git a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
new file mode 100644
index 000000000000..1899b23de7d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/img,ascii-lcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASCII LCD displays on Imagination Technologies boards
+
+maintainers:
+  - Paul Burton <paulburton@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - img,boston-lcd
+      - mti,malta-lcd
+      - mti,sead3-lcd
+
+  reg:
+    maxItems: 1
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset in bytes to the LCD registers within the system controller
+
+required:
+  - compatible
+
+oneOf:
+  - required:
+      - reg
+  - required:
+      - offset
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: img,boston-lcd
+then:
+  required:
+    - reg
+else:
+  required:
+    - offset
+
+additionalProperties: false
+
+examples:
+  - |
+    lcd: lcd@17fff000 {
+            compatible = "img,boston-lcd";
+            reg = <0x17fff000 0x8>;
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt b/Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
deleted file mode 100644
index b69bb68992fd..000000000000
--- a/Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Binding for ASCII LCD displays on Imagination Technologies boards
-
-Required properties:
-- compatible : should be one of:
-    "img,boston-lcd"
-    "mti,malta-lcd"
-    "mti,sead3-lcd"
-
-Required properties for "img,boston-lcd":
-- reg : memory region locating the device registers
-
-Required properties for "mti,malta-lcd" or "mti,sead3-lcd":
-- regmap: phandle of the system controller containing the LCD registers
-- offset: offset in bytes to the LCD registers within the system controller
-
-The layout of the registers & properties of the display are determined
-from the compatible string, making this binding somewhat trivial.
diff --git a/Documentation/devicetree/bindings/auxdisplay/modtronix,lcd2s.yaml b/Documentation/devicetree/bindings/auxdisplay/modtronix,lcd2s.yaml
new file mode 100644
index 000000000000..a1d55a2634a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/modtronix,lcd2s.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/modtronix,lcd2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Modtronix engineering LCD2S Character LCD Display
+
+maintainers:
+  - Lars Poeschel <poeschel@lemonage.de>
+
+description:
+  The LCD2S is a Character LCD Display manufactured by Modtronix Engineering.
+  The display supports a serial I2C and SPI interface. The driver currently
+  only supports the I2C interface.
+
+properties:
+  compatible:
+    const: modtronix,lcd2s
+
+  reg:
+    maxItems: 1
+    description:
+      I2C bus address of the display.
+
+  display-height-chars:
+    description: Height of the display, in character cells.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+
+  display-width-chars:
+    description: Width of the display, in character cells.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 16
+    maximum: 20
+
+required:
+  - compatible
+  - reg
+  - display-height-chars
+  - display-width-chars
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      lcd2s: auxdisplay@28 {
+        compatible = "modtronix,lcd2s";
+        reg = <0x28>;
+        display-height-chars = <4>;
+        display-width-chars = <20>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
index f0b3d30fbb76..85c4a979aec4 100644
--- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/bus/allwinner,sun50i-a64-de2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A64 Display Engine Bus Device Tree Bindings
+title: Allwinner A64 Display Engine Bus
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -31,12 +31,14 @@ properties:
     maxItems: 1
 
   allwinner,sram:
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/phandle-array
-      - maxItems: 1
     description:
       The SRAM that needs to be claimed to access the display engine
       bus.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
 
   ranges: true
 
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
index 80973619342d..bee5f53f837f 100644
--- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/bus/allwinner,sun8i-a23-rsb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A23 RSB Device Tree Bindings
+title: Allwinner A23 RSB
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -21,8 +21,10 @@ properties:
     oneOf:
       - const: allwinner,sun8i-a23-rsb
       - items:
-        - const: allwinner,sun8i-a83t-rsb
-        - const: allwinner,sun8i-a23-rsb
+          - enum:
+              - allwinner,sun8i-a83t-rsb
+              - allwinner,sun50i-h616-rsb
+          - const: allwinner,sun8i-a23-rsb
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml b/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml
new file mode 100644
index 000000000000..47227427c1c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/arm,integrator-ap-lm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Integrator/AP Logic Module extension bus
+
+maintainers:
+  - Linus Walleij <linusw@kernel.org>
+
+description: The Integrator/AP is a prototyping platform and as such has a
+  site for stacking up to four logic modules (LM) designed specifically for
+  use with this platform. A special system controller register can be read to
+  determine if a logic module is connected at index 0, 1, 2 or 3. The logic
+  module connector is described in this binding. The logic modules per se
+  then have their own specific per-module bindings and they will be described
+  as subnodes under this logic module extension bus.
+
+properties:
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  compatible:
+    items:
+      - const: arm,integrator-ap-lm
+
+  ranges: true
+  dma-ranges: true
+
+patternProperties:
+  "^bus(@[0-9a-f]*)?$":
+    description: Nodes on the Logic Module bus represent logic modules
+      and are named with bus. The first module is at 0xc0000000, the second
+      at 0xd0000000 and so on until the top of the memory of the system at
+      0xffffffff. All information about the memory used by the module is
+      in ranges and dma-ranges.
+    type: object
+
+    required:
+      - compatible
+
+required:
+  - compatible
+
+examples:
+  - |
+    bus@c0000000 {
+      compatible = "arm,integrator-ap-lm";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0xc0000000 0xc0000000 0x40000000>;
+      dma-ranges;
+
+      bus@c0000000 {
+        compatible = "simple-bus";
+        ranges = <0x00000000 0xc0000000 0x10000000>;
+        /* The Logic Modules sees the Core Module 0 RAM @80000000 */
+        dma-ranges = <0x00000000 0x80000000 0x10000000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        serial@100000 {
+          compatible = "arm,pl011", "arm,primecell";
+          reg = <0x00100000 0x1000>;
+          interrupts-extended = <&impd1_vic 1>;
+        };
+
+        impd1_vic: interrupt-controller@3000000 {
+          compatible = "arm,pl192-vic";
+          interrupt-controller;
+          #interrupt-cells = <1>;
+          reg = <0x03000000 0x1000>;
+          valid-mask = <0x00000bff>;
+          interrupts-extended = <&pic 9>;
+        };
+      };
+    };
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
new file mode 100644
index 000000000000..37ba3337f944
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/baikal,bt1-apb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 APB-bus
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  Baikal-T1 CPU or DMAC MMIO requests are handled by the AMBA 3 AXI Interconnect
+  which routes them to the AXI-APB bridge. This interface is a single master
+  multiple slaves bus in turn serializing IO accesses and routing them to the
+  addressed APB slave devices. In case of any APB protocol collisions, slave
+  device not responding on timeout an IRQ is raised with an erroneous address
+  reported to the APB terminator (APB Errors Handler Block).
+
+allOf:
+  - $ref: /schemas/simple-bus.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: baikal,bt1-apb
+
+  reg:
+    items:
+      - description: APB EHB MMIO registers
+      - description: APB MMIO region with no any device mapped
+
+  reg-names:
+    items:
+      - const: ehb
+      - const: nodev
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: APB reference clock
+
+  clock-names:
+    items:
+      - const: pclk
+
+  resets:
+    items:
+      - description: APB domain reset line
+
+  reset-names:
+    items:
+      - const: prst
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    bus@1f059000 {
+      compatible = "baikal,bt1-apb", "simple-bus";
+      reg = <0x1f059000 0x1000>,
+            <0x1d000000 0x2040000>;
+      reg-names = "ehb", "nodev";
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      ranges;
+
+      interrupts = <GIC_SHARED 16 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&ccu_sys 1>;
+      clock-names = "pclk";
+
+      resets = <&ccu_sys 1>;
+      reset-names = "prst";
+    };
+...
diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
new file mode 100644
index 000000000000..4ac78b44e45e
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/baikal,bt1-axi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 AXI-bus
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  AXI3-bus is the main communication bus of Baikal-T1 SoC connecting all
+  high-speed peripheral IP-cores with RAM controller and with MIPS P5600
+  cores. Traffic arbitration is done by means of DW AXI Interconnect (so
+  called AXI Main Interconnect) routing IO requests from one block to
+  another: from CPU to SoC peripherals and between some SoC peripherals
+  (mostly between peripheral devices and RAM, but also between DMA and
+  some peripherals). In case of any protocol error, device not responding
+  an IRQ is raised and a faulty situation is reported to the AXI EHB
+  (Errors Handler Block) embedded on top of the DW AXI Interconnect and
+  accessible by means of the Baikal-T1 System Controller.
+
+allOf:
+  - $ref: /schemas/simple-bus.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: baikal,bt1-axi
+
+  reg:
+    minItems: 1
+    items:
+      - description: Synopsys DesignWare AXI Interconnect QoS registers
+      - description: AXI EHB MMIO system controller registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: qos
+      - const: ehb
+
+  '#interconnect-cells':
+    const: 1
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the Baikal-T1 System Controller DT node
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main Interconnect uplink reference clock
+
+  clock-names:
+    items:
+      - const: aclk
+
+  resets:
+    items:
+      - description: Main Interconnect reset line
+
+  reset-names:
+    items:
+      - const: arst
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - syscon
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    bus@1f05a000 {
+      compatible = "baikal,bt1-axi", "simple-bus";
+      reg = <0x1f05a000 0x1000>,
+            <0x1f04d110 0x8>;
+      reg-names = "qos", "ehb";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      #interconnect-cells = <1>;
+
+      syscon = <&syscon>;
+
+      ranges;
+
+      interrupts = <GIC_SHARED 127 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&ccu_axi 0>;
+      clock-names = "aclk";
+
+      resets = <&ccu_axi 0>;
+      reset-names = "arst";
+    };
+...
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
deleted file mode 100644
index 729def62f0c5..000000000000
--- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Broadcom GISB bus Arbiter controller
-
-Required properties:
-
-- compatible:
-    "brcm,bcm7278-gisb-arb" for V7 28nm chips
-    "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for other 28nm chips
-    "brcm,bcm7435-gisb-arb" for newer 40nm chips
-    "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
-    "brcm,bcm7038-gisb-arb" for 130nm chips
-- reg: specifies the base physical address and size of the registers
-- interrupts: specifies the two interrupts (timeout and TEA) to be used from
-  the parent interrupt controller
-
-Optional properties:
-
-- brcm,gisb-arb-master-mask: 32-bits wide bitmask used to specify which GISB
-  masters are valid at the system level
-- brcm,gisb-arb-master-names: string list of the litteral name of the GISB
-  masters. Should match the number of bits set in brcm,gisb-master-mask and
-  the order in which they appear
-
-Example:
-
-gisb-arb@f0400000 {
-	compatible = "brcm,gisb-arb";
-	reg = <0xf0400000 0x800>;
-	interrupts = <0>, <2>;
-	interrupt-parent = <&sun_l2_intc>;
-
-	brcm,gisb-arb-master-mask = <0x7>;
-	brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
-};
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
new file mode 100644
index 000000000000..b23c3001991e
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/brcm,gisb-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom GISB bus Arbiter controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7445-gisb-arb  # for other 28nm chips
+          - const: brcm,gisb-arb
+      - items:
+          - enum:
+              - brcm,bcm7278-gisb-arb  # for V7 28nm chips
+              - brcm,bcm7435-gisb-arb  # for newer 40nm chips
+              - brcm,bcm7400-gisb-arb  # for older 40nm chips and all 65nm chips
+              - brcm,bcm7038-gisb-arb  # for 130nm chips
+              - brcm,gisb-arb          # fallback compatible
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: timeout interrupt line
+      - description: target abort interrupt line
+      - description: breakpoint interrupt line
+
+  brcm,gisb-arb-master-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      32-bits wide bitmask used to specify which GISB masters are valid at the
+      system level
+
+  brcm,gisb-arb-master-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: >
+      String list of the litteral name of the GISB masters. Should match the
+      number of bits set in brcm,gisb-master-mask and the order in which they
+      appear from MSB to LSB.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    gisb-arb@f0400000 {
+      compatible = "brcm,gisb-arb";
+      reg = <0xf0400000 0x800>;
+      interrupts = <0>, <2>;
+      interrupt-parent = <&sun_l2_intc>;
+      brcm,gisb-arb-master-mask = <0x7>;
+      brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
+    };
diff --git a/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
new file mode 100644
index 000000000000..d42dbb0bbc2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/fsl,spba-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Shared Peripherals Bus Interface
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  A simple bus enabling access to shared peripherals.
+
+  The "spba-bus" follows the "simple-bus" set of properties, as
+  specified in the Devicetree Specification.  It is an extension of
+  "simple-bus" because the SDMA controller uses this compatible flag to
+  determine which peripherals are available to it and the range over which
+  the SDMA can access.  There are no special clocks for the bus, because
+  the SDMA controller itself has its interrupt and clock assignments.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: fsl,spba-bus
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^spba-bus(@[0-9a-f]+)?$"
+
+  compatible:
+    items:
+      - const: fsl,spba-bus
+      - const: simple-bus
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - reg
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    spba-bus@30000000 {
+        compatible = "fsl,spba-bus", "simple-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x30000000 0x100000>;
+        ranges;
+    };
diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
index 1b1d1c5c21ea..e7f502070d77 100644
--- a/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -48,6 +48,11 @@ Optional properties:
 			devices, the presence of this property indicates that
 			the weim bus should operate in Burst Clock Mode.
 
+ - fsl,continuous-burst-clk	Make Burst Clock to output continuous clock.
+			Without this option Burst Clock will output clock
+			only when necessary. This takes effect only if
+			"fsl,burst-clk-enable" is set.
+
 Timing property for child nodes. It is mandatory, not optional.
 
  - fsl,weim-cs-timing:	The timing array, contains timing values for the
diff --git a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
new file mode 100644
index 000000000000..5fb4e7bfa4da
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/intel,ixp4xx-expansion-bus-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx Expansion Bus Controller
+
+description: |
+  The IXP4xx expansion bus controller handles access to devices on the
+  memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
+  including IXP42x, IXP43x, IXP45x and IXP46x.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    pattern: '^bus@[0-9a-f]+$'
+
+  compatible:
+    items:
+      - enum:
+          - intel,ixp42x-expansion-bus-controller
+          - intel,ixp43x-expansion-bus-controller
+          - intel,ixp45x-expansion-bus-controller
+          - intel,ixp46x-expansion-bus-controller
+      - const: syscon
+
+  reg:
+    description: Control registers for the expansion bus, these are not
+      inside the memory range handled by the expansion bus.
+    maxItems: 1
+
+  native-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: The IXP4xx has a peculiar MMIO access scheme, as it changes
+      the access pattern for words (swizzling) on the bus depending on whether
+      the SoC is running in big-endian or little-endian mode. Thus the
+      registers must always be accessed using native endianness.
+
+  "#address-cells":
+    description: |
+      The first cell is the chip select number.
+      The second cell is the address offset within the bank.
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+  dma-ranges: true
+
+patternProperties:
+  "^.*@[0-7],[0-9a-f]+$":
+    description: Devices attached to chip selects are represented as
+      subnodes.
+    type: object
+
+    properties:
+      intel,ixp4xx-eb-t1:
+        description: Address timing, extend address phase with n cycles.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 3
+
+      intel,ixp4xx-eb-t2:
+        description: Setup chip select timing, extend setup phase with n cycles.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 3
+
+      intel,ixp4xx-eb-t3:
+        description: Strobe timing, extend strobe phase with n cycles.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 15
+
+      intel,ixp4xx-eb-t4:
+        description: Hold timing, extend hold phase with n cycles.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 3
+
+      intel,ixp4xx-eb-t5:
+        description: Recovery timing, extend recovery phase with n cycles.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 15
+
+      intel,ixp4xx-eb-cycle-type:
+        description: The type of cycles to use on the expansion bus for this
+          chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+
+      intel,ixp4xx-eb-byte-access-on-halfword:
+        description: Allow byte read access on half word devices.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+
+      intel,ixp4xx-eb-hpi-hrdy-pol-high:
+        description: Set HPI HRDY polarity to active high when using HPI.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+
+      intel,ixp4xx-eb-mux-address-and-data:
+        description: Multiplex address and data on the data bus.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+
+      intel,ixp4xx-eb-ahb-split-transfers:
+        description: Enable AHB split transfers.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+
+      intel,ixp4xx-eb-write-enable:
+        description: Enable write cycles.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+
+      intel,ixp4xx-eb-byte-access:
+        description: Expansion bus uses only 8 bits. The default is to use
+          16 bits.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+  - native-endian
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - dma-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    bus@50000000 {
+        compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
+        reg = <0xc4000000 0x28>;
+        native-endian;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0 0x0 0x50000000 0x01000000>,
+                 <1 0x0 0x51000000 0x01000000>;
+        dma-ranges = <0 0x0 0x50000000 0x01000000>,
+                     <1 0x0 0x51000000 0x01000000>;
+        flash@0,0 {
+            compatible = "intel,ixp4xx-flash", "cfi-flash";
+            bank-width = <2>;
+            reg = <0 0x00000000 0x1000000>;
+            intel,ixp4xx-eb-t3 = <3>;
+            intel,ixp4xx-eb-cycle-type = <0>;
+            intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+            intel,ixp4xx-eb-write-enable = <1>;
+            intel,ixp4xx-eb-byte-access = <0>;
+        };
+        serial@1,0 {
+            compatible = "exar,xr16l2551", "ns8250";
+            reg = <1 0x00000000 0x10>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            clock-frequency = <1843200>;
+            intel,ixp4xx-eb-t3 = <3>;
+            intel,ixp4xx-eb-cycle-type = <1>;
+            intel,ixp4xx-eb-write-enable = <1>;
+            intel,ixp4xx-eb-byte-access = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml
new file mode 100644
index 000000000000..6a7b26b049f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/mti,mips-cdmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Common Device Memory Map
+
+description: |
+  Defines a location of the MIPS Common Device Memory Map registers.
+
+maintainers:
+  - James Hogan <jhogan@kernel.org>
+
+properties:
+  compatible:
+    const: mti,mips-cdmm
+
+  reg:
+    description: |
+      Base address and size of an unoccupied memory region, which will be
+      used to map the MIPS CDMM registers block.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cdmm@1bde8000 {
+      compatible = "mti,mips-cdmm";
+      reg = <0x1bde8000 0x8000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
deleted file mode 100644
index 3108d03802ee..000000000000
--- a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-NVIDIA Tegra ACONNECT Bus
-
-The Tegra ACONNECT bus is an AXI switch which is used to connnect various
-components inside the Audio Processing Engine (APE). All CPU accesses to
-the APE subsystem go through the ACONNECT via an APB to AXI wrapper.
-
-Required properties:
-- compatible: Must be "nvidia,tegra210-aconnect".
-- clocks: Must contain the entries for the APE clock (TEGRA210_CLK_APE),
-  and APE interface clock (TEGRA210_CLK_APB2APE).
-- clock-names: Must contain the names "ape" and "apb2ape" for the corresponding
-  'clocks' entries.
-- power-domains: Must contain a phandle that points to the audio powergate
-  (namely 'aud') for Tegra210.
-- #address-cells: The number of cells used to represent physical base addresses
-  in the aconnect address space. Should be 1.
-- #size-cells: The number of cells used to represent the size of an address
-  range in the aconnect address space. Should be 1.
-- ranges: Mapping of the aconnect address space to the CPU address space.
-
-All devices accessed via the ACONNNECT are described by child-nodes.
-
-Example:
-
-	aconnect@702c0000 {
-		compatible = "nvidia,tegra210-aconnect";
-		clocks = <&tegra_car TEGRA210_CLK_APE>,
-			 <&tegra_car TEGRA210_CLK_APB2APE>;
-		clock-names = "ape", "apb2ape";
-		power-domains = <&pd_audio>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
-
-
-		child1 {
-			...
-		};
-
-		child2 {
-			...
-		};
-	};
diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
new file mode 100644
index 000000000000..d3ed048c9521
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/nvidia,tegra210-aconnect.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra ACONNECT Bus
+
+description: |
+  The Tegra ACONNECT bus is an AXI switch which is used to connnect various
+  components inside the Audio Processing Engine (APE). All CPU accesses to
+  the APE subsystem go through the ACONNECT via an APB to AXI wrapper. All
+  devices accessed via the ACONNNECT are described by child-nodes.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-aconnect
+      - items:
+          - enum:
+              - nvidia,tegra234-aconnect
+              - nvidia,tegra186-aconnect
+              - nvidia,tegra194-aconnect
+          - const: nvidia,tegra210-aconnect
+
+  clocks:
+    items:
+      - description: Must contain the entry for APE clock
+      - description: Must contain the entry for APE interface clock
+
+  clock-names:
+    items:
+      - const: ape
+      - const: apb2ape
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "@[0-9a-f]+$":
+    type: object
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra210-car.h>
+
+    aconnect@702c0000 {
+        compatible = "nvidia,tegra210-aconnect";
+        clocks = <&tegra_car TEGRA210_CLK_APE>,
+                 <&tegra_car TEGRA210_CLK_APB2APE>;
+        clock-names = "ape", "apb2ape";
+        power-domains = <&pd_audio>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x702c0000 0x702c0000 0x00040000>;
+
+        // Child device nodes follow ...
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/bus/palmbus.yaml b/Documentation/devicetree/bindings/bus/palmbus.yaml
new file mode 100644
index 000000000000..30fa6526cfc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/palmbus.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/palmbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink PalmBus
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  The ralink palmbus controller can be found in all ralink MIPS
+  SoCs. It provides an external bus for connecting multiple
+  external devices to the SoC.
+
+properties:
+  $nodename:
+    pattern: "^palmbus(@[0-9a-f]+)?$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  compatible:
+    const: palmbus
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+patternProperties:
+  # All other properties should be child nodes with unit-address and 'reg'
+  "@[0-9a-f]+$":
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    palmbus@1e000000 {
+        compatible = "palmbus";
+        reg = <0x1e000000 0x100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e000000 0x0fffff>;
+
+        gpio@600 {
+            #gpio-cells = <2>;
+            #interrupt-cells = <2>;
+            compatible = "mediatek,mt7621-gpio";
+            gpio-controller;
+            gpio-ranges = <&pinctrl 0 0 95>;
+            interrupt-controller;
+            reg = <0x600 0x100>;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
new file mode 100644
index 000000000000..8e9e6ff35d7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+
+description: |
+  This binding describes the dependencies (clocks, resets, power domains) which
+  need to be turned on in a sequence before communication over the AHB bus
+  becomes possible.
+
+  Additionally, the reg property is used to pass to the driver the location of
+  two sadly undocumented registers which need to be poked as part of the sequence.
+
+  The SSC (Snapdragon Sensor Core) block contains a gpio controller, i2c/spi/uart
+  controllers, a hexagon core, and a clock controller which provides clocks for
+  the above.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,msm8998-ssc-block-bus
+      - const: qcom,ssc-block-bus
+
+  reg:
+    items:
+      - description: SSCAON_CONFIG0 registers
+      - description: SSCAON_CONFIG1 registers
+
+  reg-names:
+    items:
+      - const: mpm_sscaon_config0
+      - const: mpm_sscaon_config1
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: xo
+      - const: aggre2
+      - const: gcc_im_sleep
+      - const: aggre2_north
+      - const: ssc_xo
+      - const: ssc_ahbs
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+
+  power-domain-names:
+    items:
+      - const: ssc_cx
+      - const: ssc_mx
+
+  resets:
+    items:
+      - description: Main reset
+      - description:
+          SSC Branch Control Register reset (associated with the ssc_xo and
+          ssc_ahbs clocks)
+
+  reset-names:
+    items:
+      - const: ssc_reset
+      - const: ssc_bcr
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: describes how to locate the ssc AXI halt register
+    items:
+      - items:
+          - description: Phandle reference to a syscon representing TCSR
+          - description: offset for the ssc AXI halt register
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        // devices under this node are physically located in the SSC block, connected to an ssc-internal bus;
+        ssc_ahb_slave: bus@10ac008 {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus";
+            reg = <0x10ac008 0x4>, <0x10ac010 0x4>;
+            reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1";
+
+            clocks = <&xo>,
+                     <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+                     <&gcc GCC_IM_SLEEP>,
+                     <&gcc AGGRE2_SNOC_NORTH_AXI>,
+                     <&gcc SSC_XO>,
+                     <&gcc SSC_CNOC_AHBS_CLK>;
+            clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs";
+
+            resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>;
+            reset-names = "ssc_reset", "ssc_bcr";
+
+            power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>;
+            power-domain-names = "ssc_cx", "ssc_mx";
+
+            qcom,halt-regs = <&tcsr_mutex_regs 0x26000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/renesas,bsc.yaml b/Documentation/devicetree/bindings/bus/renesas,bsc.yaml
index 7d10b62a52d5..f53a37785413 100644
--- a/Documentation/devicetree/bindings/bus/renesas,bsc.yaml
+++ b/Documentation/devicetree/bindings/bus/renesas,bsc.yaml
@@ -44,6 +44,8 @@ properties:
 required:
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml
index 33326ffdb266..182134d7a6a3 100644
--- a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml
+++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml
@@ -61,6 +61,8 @@ anyOf:
   - required:
       - power-domains
 
+additionalProperties: true
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-msm8996.h>
diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
new file mode 100644
index 000000000000..49df13fc2f89
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/socionext,uniphier-system-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier System Bus
+
+description: |
+  The UniPhier System Bus is an external bus that connects on-board devices to
+  the UniPhier SoC. It is a simple (semi-)parallel bus with address, data, and
+  some control signals. It supports up to 8 banks (chip selects).
+
+  Before any access to the bus, the bus controller must be configured; the bus
+  controller registers provide the control for the translation from the offset
+  within each bank to the CPU-viewed address. The needed setup includes the
+  base address, the size of each bank. Optionally, some timing parameters can
+  be optimized for faster bus access.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    const: socionext,uniphier-system-bus
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    description: |
+      The first cell is the bank number (chip select).
+      The second cell is the address offset within the bank.
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description: |
+      Provide address translation from the System Bus to the parent bus.
+
+      Note:
+      The address region(s) that can be assigned for the System Bus is
+      implementation defined. Some SoCs can use 0x00000000-0x0fffffff and
+      0x40000000-0x4fffffff, while other SoCs only 0x40000000-0x4fffffff.
+      There might be additional limitations depending on SoCs and the boot mode.
+      The address translation is arbitrary as long as the banks are assigned in
+      the supported address space with the required alignment and they do not
+      overlap one another.
+
+      For example, it is possible to map:
+        bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff
+      It is also possible to map:
+        bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff
+      There is no reason to stick to a particular translation mapping, but the
+      "ranges" property should provide a "reasonable" default that is known to
+      work. The software should initialize the bus controller according to it.
+
+patternProperties:
+  "^.*@[1-5],[1-9a-f][0-9a-f]+$":
+    description: Devices attached to chip selects
+    type: object
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    // In this example,
+    // - the Ethernet device is connected at the offset 0x01f00000 of CS1 and
+    //   mapped to 0x43f00000 of the parent bus.
+    // - the UART device is connected at the offset 0x00200000 of CS5 and
+    //   mapped to 0x46200000 of the parent bus.
+
+    system-bus@58c00000 {
+        compatible = "socionext,uniphier-system-bus";
+        reg = <0x58c00000 0x400>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <1 0x00000000 0x42000000 0x02000000>,
+                 <5 0x00000000 0x46000000 0x01000000>;
+
+        ethernet@1,1f00000 {
+            compatible = "smsc,lan9115";
+            reg = <1 0x01f00000 0x1000>;
+            interrupts = <0 48 4>;
+            phy-mode = "mii";
+        };
+
+        serial@5,200000 {
+            compatible = "ns16550a";
+            reg = <5 0x00200000 0x20>;
+            interrupts = <0 49 4>;
+            clock-frequency = <12288000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt
deleted file mode 100644
index 233eb8294204..000000000000
--- a/Documentation/devicetree/bindings/bus/ti-sysc.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-Texas Instruments sysc interconnect target module wrapper binding
-
-Texas Instruments SoCs can have a generic interconnect target module
-hardware for devices connected to various interconnects such as L3
-interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc
-is mostly used for interaction between module and PRCM. It participates
-in the OCP Disconnect Protocol but other than that is mostly independent
-of the interconnect.
-
-Each interconnect target module can have one or more devices connected to
-it. There is a set of control registers for managing interconnect target
-module clocks, idle modes and interconnect level resets for the module.
-
-These control registers are sprinkled into the unused register address
-space of the first child device IP block managed by the interconnect
-target module and typically are named REVISION, SYSCONFIG and SYSSTATUS.
-
-Required standard properties:
-
-- compatible	shall be one of the following generic types:
-
-		"ti,sysc"
-		"ti,sysc-omap2"
-		"ti,sysc-omap4"
-		"ti,sysc-omap4-simple"
-
-		or one of the following derivative types for hardware
-		needing special workarounds:
-
-		"ti,sysc-omap2-timer"
-		"ti,sysc-omap4-timer"
-		"ti,sysc-omap3430-sr"
-		"ti,sysc-omap3630-sr"
-		"ti,sysc-omap4-sr"
-		"ti,sysc-omap3-sham"
-		"ti,sysc-omap-aes"
-		"ti,sysc-mcasp"
-		"ti,sysc-dra7-mcasp"
-		"ti,sysc-usb-host-fs"
-		"ti,sysc-dra7-mcan"
-
-- reg		shall have register areas implemented for the interconnect
-		target module in question such as revision, sysc and syss
-
-- reg-names	shall contain the register names implemented for the
-		interconnect target module in question such as
-		"rev, "sysc", and "syss"
-
-- ranges	shall contain the interconnect target module IO range
-		available for one or more child device IP blocks managed
-		by the interconnect target module, the ranges may include
-		multiple ranges such as device L4 range for control and
-		parent L3 range for DMA access
-
-Optional properties:
-
-- ti,sysc-mask	shall contain mask of supported register bits for the
-		SYSCONFIG register as documented in the Technical Reference
-		Manual (TRM) for the interconnect target module
-
-- ti,sysc-midle	list of master idle modes supported by the interconnect
-		target module as documented in the TRM for SYSCONFIG
-		register MIDLEMODE bits
-
-- ti,sysc-sidle	list of slave idle modes supported by the interconnect
-		target module as documented in the TRM for SYSCONFIG
-		register SIDLEMODE bits
-
-- ti,sysc-delay-us	delay needed after OCP softreset before accssing
-			SYSCONFIG register again
-
-- ti,syss-mask	optional mask of reset done status bits as described in the
-		TRM for SYSSTATUS registers, typically 1 with some devices
-		having separate reset done bits for children like OHCI and
-		EHCI
-
-- clocks	clock specifier for each name in the clock-names as
-		specified in the binding documentation for ti-clkctrl,
-		typically available for all interconnect targets on TI SoCs
-		based on omap4 except if it's read-only register in hwauto
-		mode as for example omap4 L4_CFG_CLKCTRL
-
-- clock-names	should contain at least "fck", and optionally also "ick"
-		depending on the SoC and the interconnect target module,
-		some interconnect target modules also need additional
-		optional clocks that can be specified as listed in TRM
-		for the related CLKCTRL register bits 8 to 15 such as
-		"dbclk" or "clk32k" depending on their role
-
-- ti,hwmods	optional TI interconnect module name to use legacy
-		hwmod platform data
-
-- ti,no-reset-on-init	interconnect target module should not be reset at init
-
-- ti,no-idle-on-init	interconnect target module should not be idled at init
-
-- ti,no-idle		interconnect target module should not be idled
-
-Example: Single instance of MUSB controller on omap4 using interconnect ranges
-using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
-
-	target-module@2b000 {		/* 0x4a0ab000, ap 84 12.0 */
-		compatible = "ti,sysc-omap2";
-		ti,hwmods = "usb_otg_hs";
-		reg = <0x2b400 0x4>,
-		      <0x2b404 0x4>,
-		      <0x2b408 0x4>;
-		reg-names = "rev", "sysc", "syss";
-		clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
-		clock-names = "fck";
-		ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-				 SYSC_OMAP2_SOFTRESET |
-				 SYSC_OMAP2_AUTOIDLE)>;
-		ti,sysc-midle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>,
-				<SYSC_IDLE_SMART>;
-		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>,
-				<SYSC_IDLE_SMART>,
-				<SYSC_IDLE_SMART_WKUP>;
-		ti,syss-mask = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x2b000 0x1000>;
-
-		usb_otg_hs: otg@0 {
-			compatible = "ti,omap4-musb";
-			reg = <0x0 0x7ff>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			usb-phy = <&usb2_phy>;
-			...
-		};
-	};
-
-Note that other SoCs, such as am335x can have multiple child devices. On am335x
-there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA
-instance as children of a single interconnect target module.
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.yaml b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
new file mode 100644
index 000000000000..fced4082b047
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/ti-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments interconnect target module binding
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  Texas Instruments SoCs can have a generic interconnect target module
+  for devices connected to various interconnects such as L3 interconnect
+  using Arteris NoC, and L4 interconnect using Sonics s3220. This module
+  is mostly used for interaction between module and Power, Reset and Clock
+  Manager PRCM. It participates in the OCP Disconnect Protocol, but other
+  than that it is mostly independent of the interconnect.
+
+  Each interconnect target module can have one or more devices connected to
+  it. There is a set of control registers for managing the interconnect target
+  module clocks, idle modes and interconnect level resets.
+
+  The interconnect target module control registers are sprinkled into the
+  unused register address space of the first child device IP block managed by
+  the interconnect target module. Typically the register names are REVISION,
+  SYSCONFIG and SYSSTATUS.
+
+properties:
+  $nodename:
+    pattern: "^target-module(@[0-9a-f]+)?$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,sysc-omap2
+              - ti,sysc-omap4
+              - ti,sysc-omap4-simple
+              - ti,sysc-omap2-timer
+              - ti,sysc-omap4-timer
+              - ti,sysc-omap3430-sr
+              - ti,sysc-omap3630-sr
+              - ti,sysc-omap4-sr
+              - ti,sysc-omap3-sham
+              - ti,sysc-omap-aes
+              - ti,sysc-mcasp
+              - ti,sysc-dra7-mcasp
+              - ti,sysc-usb-host-fs
+              - ti,sysc-dra7-mcan
+              - ti,sysc-pruss
+          - const: ti,sysc
+      - items:
+          - const: ti,sysc
+
+  reg:
+    description:
+      Interconnect target module control registers consisting of
+      REVISION, SYSCONFIG and SYSSTATUS registers as defined in the
+      Technical Reference Manual for the SoC.
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    description:
+      Interconnect target module control register names consisting
+      of "rev", "sysc" and "syss".
+    oneOf:
+      - minItems: 1
+        items:
+          - const: rev
+          - const: sysc
+          - const: syss
+      - items:
+          - const: rev
+          - const: syss
+      - enum: [ sysc, syss ]
+
+  power-domains:
+    description: Target module power domain if available.
+    maxItems: 1
+
+  clocks:
+    description:
+      Target module clocks consisting of one functional clock, one
+      interface clock, and up to 8 module specific optional clocks.
+      Some modules may have only the functional clock, and some have
+      no configurable clocks.
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    description:
+      Target module clock names like "fck", "ick", "optck1", "optck2"
+      if the clocks are configurable.
+    oneOf:
+      - enum: [ ick, fck, sys_clk ]
+      - items:
+          - const: fck
+          - enum: [ ick. dbclk, osc, sys_clk, dss_clk, ahclkx ]
+      - items:
+          - const: fck
+          - const: phy-clk
+          - const: phy-clk-div
+      - items:
+          - const: fck
+          - const: hdmi_clk
+          - const: sys_clk
+          - const: tv_clk
+      - items:
+          - const: fck
+          - const: ahclkx
+          - const: ahclkr
+
+  resets:
+    description:
+      Target module reset bit in the RSTCTRL register if wired for the module.
+      Note that the other reset bits should be mapped for the child device
+      driver to use.
+    maxItems: 1
+
+  reset-names:
+    description:
+      Target module reset names in the RSTCTRL register, typically named
+      "rstctrl" if only one reset bit is wired for the module.
+    items:
+      - const: rstctrl
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  dma-ranges: true
+
+  ti,sysc-mask:
+    description: Mask of supported register bits for the SYSCONFIG register
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,sysc-midle:
+    description: List of hardware supported idle modes
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  ti,sysc-sidle:
+    description: List of hardware supported idle modes
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  ti,syss-mask:
+    description: Mask of supported register bits for the SYSSTATUS register
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,sysc-delay-us:
+    description: Delay needed after OCP softreset before accessing SYCONFIG
+    default: 0
+    minimum: 0
+    maximum: 2
+
+  ti,no-reset-on-init:
+    description: Interconnect target module shall not be reset at init
+    type: boolean
+
+  ti,no-idle-on-init:
+    description: Interconnect target module shall not be idled at init
+    type: boolean
+
+  ti,no-idle:
+    description: Interconnect target module shall not be idled
+    type: boolean
+
+  ti,hwmods:
+    description: Interconnect module name to use with legacy hwmod data
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/bus/ti-sysc.h>
+    #include <dt-bindings/clock/omap4.h>
+
+    target-module@2b000 {
+        compatible = "ti,sysc-omap2", "ti,sysc";
+        ti,hwmods = "usb_otg_hs";
+        reg = <0x2b400 0x4>,
+              <0x2b404 0x4>,
+              <0x2b408 0x4>;
+        reg-names = "rev", "sysc", "syss";
+        clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+        clock-names = "fck";
+        ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+                         SYSC_OMAP2_SOFTRESET |
+                         SYSC_OMAP2_AUTOIDLE)>;
+        ti,sysc-midle = <SYSC_IDLE_FORCE>,
+                        <SYSC_IDLE_NO>,
+                        <SYSC_IDLE_SMART>;
+        ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+                        <SYSC_IDLE_NO>,
+                        <SYSC_IDLE_SMART>,
+                        <SYSC_IDLE_SMART_WKUP>;
+        ti,syss-mask = <1>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x2b000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt b/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt
deleted file mode 100644
index 68ef80afff16..000000000000
--- a/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-UniPhier System Bus
-
-The UniPhier System Bus is an external bus that connects on-board devices to
-the UniPhier SoC.  It is a simple (semi-)parallel bus with address, data, and
-some control signals.  It supports up to 8 banks (chip selects).
-
-Before any access to the bus, the bus controller must be configured; the bus
-controller registers provide the control for the translation from the offset
-within each bank to the CPU-viewed address.  The needed setup includes the base
-address, the size of each bank.  Optionally, some timing parameters can be
-optimized for faster bus access.
-
-Required properties:
-- compatible: should be "socionext,uniphier-system-bus".
-- reg: offset and length of the register set for the bus controller device.
-- #address-cells: should be 2.  The first cell is the bank number (chip select).
-  The second cell is the address offset within the bank.
-- #size-cells: should be 1.
-- ranges: should provide a proper address translation from the System Bus to
-  the parent bus.
-
-Note:
-The address region(s) that can be assigned for the System Bus is implementation
-defined.  Some SoCs can use 0x00000000-0x0fffffff and 0x40000000-0x4fffffff,
-while other SoCs can only use 0x40000000-0x4fffffff.  There might be additional
-limitations depending on SoCs and the boot mode.  The address translation is
-arbitrary as long as the banks are assigned in the supported address space with
-the required alignment and they do not overlap one another.
-For example, it is possible to map:
-  bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff
-It is also possible to map:
-  bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff
-There is no reason to stick to a particular translation mapping, but the
-"ranges" property should provide a "reasonable" default that is known to work.
-The software should initialize the bus controller according to it.
-
-Example:
-
-	system-bus {
-		compatible = "socionext,uniphier-system-bus";
-		reg = <0x58c00000 0x400>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <1 0x00000000 0x42000000 0x02000000
-			  5 0x00000000 0x46000000 0x01000000>;
-
-		ethernet@1,01f00000 {
-			compatible = "smsc,lan9115";
-			reg = <1 0x01f00000 0x1000>;
-			interrupts = <0 48 4>
-			phy-mode = "mii";
-		};
-
-		uart@5,00200000 {
-			compatible = "ns16550a";
-			reg = <5 0x00200000 0x20>;
-			interrupts = <0 49 4>
-			clock-frequency = <12288000>;
-		};
-	};
-
-In this example,
- - the Ethernet device is connected at the offset 0x01f00000 of CS1 and
-   mapped to 0x43f00000 of the parent bus.
- - the UART device is connected at the offset 0x00200000 of CS5 and
-   mapped to 0x46200000 of the parent bus.
diff --git a/Documentation/devicetree/bindings/c6x/clocks.txt b/Documentation/devicetree/bindings/c6x/clocks.txt
deleted file mode 100644
index a04f5fd30122..000000000000
--- a/Documentation/devicetree/bindings/c6x/clocks.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-C6X PLL Clock Controllers
--------------------------
-
-This is a first-cut support for the SoC clock controllers. This is still
-under development and will probably change as the common device tree
-clock support is added to the kernel.
-
-Required properties:
-
-- compatible: "ti,c64x+pll"
-    May also have SoC-specific value to support SoC-specific initialization
-    in the driver. One of:
-        "ti,c6455-pll"
-        "ti,c6457-pll"
-        "ti,c6472-pll"
-        "ti,c6474-pll"
-
-- reg: base address and size of register area
-- clock-frequency: input clock frequency in hz
-
-
-Optional properties:
-
-- ti,c64x+pll-bypass-delay: CPU cycles to delay when entering bypass mode
-
-- ti,c64x+pll-reset-delay:  CPU cycles to delay after PLL reset
-
-- ti,c64x+pll-lock-delay:   CPU cycles to delay after PLL frequency change
-
-Example:
-
-	clock-controller@29a0000 {
-		compatible = "ti,c6472-pll", "ti,c64x+pll";
-		reg = <0x029a0000 0x200>;
-		clock-frequency = <25000000>;
-
-		ti,c64x+pll-bypass-delay = <200>;
-		ti,c64x+pll-reset-delay = <12000>;
-		ti,c64x+pll-lock-delay = <80000>;
-	};
diff --git a/Documentation/devicetree/bindings/c6x/dscr.txt b/Documentation/devicetree/bindings/c6x/dscr.txt
deleted file mode 100644
index 92672235de57..000000000000
--- a/Documentation/devicetree/bindings/c6x/dscr.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-Device State Configuration Registers
-------------------------------------
-
-TI C6X SoCs contain a region of miscellaneous registers which provide various
-function for SoC control or status. Details vary considerably among from SoC
-to SoC with no two being alike.
-
-In general, the Device State Configuration Registers (DSCR) will provide one or
-more configuration registers often protected by a lock register where one or
-more key values must be written to a lock register in order to unlock the
-configuration register for writes. These configuration register may be used to
-enable (and disable in some cases) SoC pin drivers, select peripheral clock
-sources (internal or pin), etc. In some cases, a configuration register is
-write once or the individual bits are write once. In addition to device config,
-the DSCR block may provide registers which are used to reset peripherals,
-provide device ID information, provide ethernet MAC addresses, as well as other
-miscellaneous functions.
-
-For device state control (enable/disable), each device control is assigned an
-id which is used by individual device drivers to control the state as needed.
-
-Required properties:
-
-- compatible: must be "ti,c64x+dscr"
-- reg: register area base and size
-
-Optional properties:
-
-  NOTE: These are optional in that not all SoCs will have all properties. For
-        SoCs which do support a given property, leaving the property out of the
-        device tree will result in reduced functionality or possibly driver
-        failure.
-
-- ti,dscr-devstat
-    offset of the devstat register
-
-- ti,dscr-silicon-rev
-    offset, start bit, and bitsize of silicon revision field
-
-- ti,dscr-rmii-resets
-    offset and bitmask of RMII reset field. May have multiple tuples if more
-    than one ethernet port is available.
-
-- ti,dscr-locked-regs
-    possibly multiple tuples describing registers which are write protected by
-    a lock register. Each tuple consists of the register offset, lock register
-    offsset, and the key value used to unlock the register.
-
-- ti,dscr-kick-regs
-    offset and key values of two "kick" registers used to write protect other
-    registers in DSCR. On SoCs using kick registers, the first key must be
-    written to the first kick register and the second key must be written to
-    the second register before other registers in the area are write-enabled.
-
-- ti,dscr-mac-fuse-regs
-    MAC addresses are contained in two registers. Each element of a MAC address
-    is contained in a single byte. This property has two tuples. Each tuple has
-    a register offset and four cells representing bytes in the register from
-    most significant to least. The value of these four cells is the MAC byte
-    index (1-6) of the byte within the register. A value of 0 means the byte
-    is unused in the MAC address.
-
-- ti,dscr-devstate-ctl-regs
-    This property describes the bitfields used to control the state of devices.
-    Each tuple describes a range of identical bitfields used to control one or
-    more devices (one bitfield per device). The layout of each tuple is:
-
-        start_id num_ids reg enable disable start_bit nbits
-
-    Where:
-        start_id is device id for the first device control in the range
-        num_ids is the number of device controls in the range
-        reg is the offset of the register holding the control bits
-        enable is the value to enable a device
-        disable is the value to disable a device (0xffffffff if cannot disable)
-        start_bit is the bit number of the first bit in the range
-        nbits is the number of bits per device control
-
-- ti,dscr-devstate-stat-regs
-    This property describes the bitfields used to provide device state status
-    for device states controlled by the DSCR. Each tuple describes a range of
-    identical bitfields used to provide status for one or more devices (one
-    bitfield per device). The layout of each tuple is:
-
-        start_id num_ids reg enable disable start_bit nbits
-
-    Where:
-        start_id is device id for the first device status in the range
-        num_ids is the number of devices covered by the range
-        reg is the offset of the register holding the status bits
-        enable is the value indicating device is enabled
-        disable is the value indicating device is disabled
-        start_bit is the bit number of the first bit in the range
-        nbits is the number of bits per device status
-
-- ti,dscr-privperm
-    Offset and default value for register used to set access privilege for
-    some SoC devices.
-
-
-Example:
-
-	device-state-config-regs@2a80000 {
-		compatible = "ti,c64x+dscr";
-		reg = <0x02a80000 0x41000>;
-
-		ti,dscr-devstat = <0>;
-		ti,dscr-silicon-rev = <8 28 0xf>;
-		ti,dscr-rmii-resets = <0x40020 0x00040000>;
-
-		ti,dscr-locked-regs = <0x40008 0x40004 0x0f0a0b00>;
-		ti,dscr-devstate-ctl-regs =
-			 <0 12 0x40008 1 0  0  2
-			  12 1 0x40008 3 0 30  2
-			  13 2 0x4002c 1 0xffffffff 0 1>;
-		ti,dscr-devstate-stat-regs =
-			<0 10 0x40014 1 0  0  3
-			 10 2 0x40018 1 0  0  3>;
-
-		ti,dscr-mac-fuse-regs = <0x700 1 2 3 4
-					 0x704 5 6 0 0>;
-
-		ti,dscr-privperm = <0x41c 0xaaaaaaaa>;
-
-		ti,dscr-kick-regs = <0x38 0x83E70B13
-				     0x3c 0x95A4F1E0>;
-	};
diff --git a/Documentation/devicetree/bindings/c6x/emifa.txt b/Documentation/devicetree/bindings/c6x/emifa.txt
deleted file mode 100644
index 0ff6e9b9a13f..000000000000
--- a/Documentation/devicetree/bindings/c6x/emifa.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-External Memory Interface
--------------------------
-
-The emifa node describes a simple external bus controller found on some C6X
-SoCs. This interface provides external busses with a number of chip selects.
-
-Required properties:
-
-- compatible: must be "ti,c64x+emifa", "simple-bus"
-- reg: register area base and size
-- #address-cells: must be 2 (chip-select + offset)
-- #size-cells: must be 1
-- ranges: mapping from EMIFA space to parent space
-
-
-Optional properties:
-
-- ti,dscr-dev-enable: Device ID if EMIF is enabled/disabled from DSCR
-
-- ti,emifa-burst-priority:
-      Number of memory transfers after which the EMIF will elevate the priority
-      of the oldest command in the command FIFO. Setting this field to 255
-      disables this feature, thereby allowing old commands to stay in the FIFO
-      indefinitely.
-
-- ti,emifa-ce-config:
-      Configuration values for each of the supported chip selects.
-
-Example:
-
-	emifa@70000000 {
-		compatible = "ti,c64x+emifa", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x70000000 0x100>;
-		ranges = <0x2 0x0 0xa0000000 0x00000008
-		          0x3 0x0 0xb0000000 0x00400000
-			  0x4 0x0 0xc0000000 0x10000000
-			  0x5 0x0 0xD0000000 0x10000000>;
-
-		ti,dscr-dev-enable = <13>;
-		ti,emifa-burst-priority = <255>;
-		ti,emifa-ce-config = <0x00240120
-				      0x00240120
-				      0x00240122
-				      0x00240122>;
-
-		flash@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x3 0x0 0x400000>;
-			bank-width = <1>;
-			device-width = <1>;
-			partition@0 {
-				reg = <0x0 0x400000>;
-				label = "NOR";
-			};
-		};
-	};
-
-This shows a flash chip attached to chip select 3.
diff --git a/Documentation/devicetree/bindings/c6x/soc.txt b/Documentation/devicetree/bindings/c6x/soc.txt
deleted file mode 100644
index b1e4973b5769..000000000000
--- a/Documentation/devicetree/bindings/c6x/soc.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-C6X System-on-Chip
-------------------
-
-Required properties:
-
-- compatible: "simple-bus"
-- #address-cells: must be 1
-- #size-cells: must be 1
-- ranges
-
-Optional properties:
-
-- model: specific SoC model
-
-- nodes for IP blocks within SoC
-
-
-Example:
-
-	soc {
-		compatible = "simple-bus";
-		model = "tms320c6455";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		...
-	};
diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
deleted file mode 100644
index 45e79172a646..000000000000
--- a/Documentation/devicetree/bindings/chosen.txt
+++ /dev/null
@@ -1,137 +0,0 @@
-The chosen node
----------------
-
-The chosen node does not represent a real device, but serves as a place
-for passing data between firmware and the operating system, like boot
-arguments. Data in the chosen node does not represent the hardware.
-
-The following properties are recognized:
-
-
-kaslr-seed
------------
-
-This property is used when booting with CONFIG_RANDOMIZE_BASE as the
-entropy used to randomize the kernel image base address location. Since
-it is used directly, this value is intended only for KASLR, and should
-not be used for other purposes (as it may leak information about KASLR
-offsets). It is parsed as a u64 value, e.g.
-
-/ {
-	chosen {
-		kaslr-seed = <0xfeedbeef 0xc0def00d>;
-	};
-};
-
-Note that if this property is set from UEFI (or a bootloader in EFI
-mode) when EFI_RNG_PROTOCOL is supported, it will be overwritten by
-the Linux EFI stub (which will populate the property itself, using
-EFI_RNG_PROTOCOL).
-
-stdout-path
------------
-
-Device trees may specify the device to be used for boot console output
-with a stdout-path property under /chosen, as described in the Devicetree
-Specification, e.g.
-
-/ {
-	chosen {
-		stdout-path = "/serial@f00:115200";
-	};
-
-	serial@f00 {
-		compatible = "vendor,some-uart";
-		reg = <0xf00 0x10>;
-	};
-};
-
-If the character ":" is present in the value, this terminates the path.
-The meaning of any characters following the ":" is device-specific, and
-must be specified in the relevant binding documentation.
-
-For UART devices, the preferred binding is a string in the form:
-
-	<baud>{<parity>{<bits>{<flow>}}}
-
-where
-
-	baud	- baud rate in decimal
-	parity	- 'n' (none), 'o', (odd) or 'e' (even)
-	bits	- number of data bits
-	flow	- 'r' (rts)
-
-For example: 115200n8r
-
-Implementation note: Linux will look for the property "linux,stdout-path" or
-on PowerPC "stdout" if "stdout-path" is not found.  However, the
-"linux,stdout-path" and "stdout" properties are deprecated. New platforms
-should only use the "stdout-path" property.
-
-linux,booted-from-kexec
------------------------
-
-This property is set (currently only on PowerPC, and only needed on
-book3e) by some versions of kexec-tools to tell the new kernel that it
-is being booted by kexec, as the booting environment may differ (e.g.
-a different secondary CPU release mechanism)
-
-linux,usable-memory-range
--------------------------
-
-This property (arm64 only) holds a base address and size, describing a
-limited region in which memory may be considered available for use by
-the kernel. Memory outside of this range is not available for use.
-
-This property describes a limitation: memory within this range is only
-valid when also described through another mechanism that the kernel
-would otherwise use to determine available memory (e.g. memory nodes
-or the EFI memory map). Valid memory may be sparse within the range.
-e.g.
-
-/ {
-	chosen {
-		linux,usable-memory-range = <0x9 0xf0000000 0x0 0x10000000>;
-	};
-};
-
-The main usage is for crash dump kernel to identify its own usable
-memory and exclude, at its boot time, any other memory areas that are
-part of the panicked kernel's memory.
-
-While this property does not represent a real hardware, the address
-and the size are expressed in #address-cells and #size-cells,
-respectively, of the root node.
-
-linux,elfcorehdr
-----------------
-
-This property (currently used only on arm64) holds the memory range,
-the address and the size, of the elf core header which mainly describes
-the panicked kernel's memory layout as PT_LOAD segments of elf format.
-e.g.
-
-/ {
-	chosen {
-		linux,elfcorehdr = <0x9 0xfffff000 0x0 0x800>;
-	};
-};
-
-While this property does not represent a real hardware, the address
-and the size are expressed in #address-cells and #size-cells,
-respectively, of the root node.
-
-linux,initrd-start and linux,initrd-end
----------------------------------------
-
-These properties hold the physical start and end address of an initrd that's
-loaded by the bootloader. Note that linux,initrd-start is inclusive, but
-linux,initrd-end is exclusive.
-e.g.
-
-/ {
-	chosen {
-		linux,initrd-start = <0x82000000>;
-		linux,initrd-end = <0x82800000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
new file mode 100644
index 000000000000..50ebd8c57795
--- /dev/null
+++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/chrome/google,cros-ec-typec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Chrome OS EC(Embedded Controller) Type C port driver.
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+  - Prashant Malani <pmalani@chromium.org>
+
+description:
+  Chrome OS devices have an Embedded Controller(EC) which has access to
+  Type C port state. This node is intended to allow the host to read and
+  control the Type C ports. The node for this device should be under a
+  cros-ec node like google,cros-ec-spi.
+
+properties:
+  compatible:
+    const: google,cros-ec-typec
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^connector@[0-9a-f]+$':
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+    properties:
+      reg:
+        maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |+
+    spi0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cros_ec: ec@0 {
+        compatible = "google,cros-ec-spi";
+        reg = <0>;
+
+        typec {
+          compatible = "google,cros-ec-typec";
+
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          connector@0 {
+            compatible = "usb-c-connector";
+            reg = <0>;
+            power-role = "dual";
+            data-role = "dual";
+            try-power-role = "source";
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml
new file mode 100644
index 000000000000..5b875af6a95a
--- /dev/null
+++ b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/chrome/google,cros-kbd-led-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS keyboard backlight LED driver.
+
+maintainers:
+  - Tzung-Bi Shih <tzungbi@kernel.org>
+
+properties:
+  compatible:
+    const: google,cros-kbd-led-backlight
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    spi0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cros_ec: ec@0 {
+        compatible = "google,cros-ec-spi";
+        reg = <0>;
+
+        kbd-led-backlight {
+          compatible = "google,cros-kbd-led-backlight";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
new file mode 100644
index 000000000000..983033fe5b17
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/adi,axi-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Analog Devices AXI clkgen pcore clock generator
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  The axi_clkgen IP core is a software programmable clock generator,
+  that can be synthesized on various FPGA platforms.
+
+  Link: https://wiki.analog.com/resources/fpga/docs/axi_clkgen
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-clkgen-2.00.a
+      - adi,zynqmp-axi-clkgen-2.00.a
+
+  clocks:
+    description:
+      Specifies the reference clock(s) from which the output frequency is
+      derived. This must either reference one clock if only the first clock
+      input is connected or two if both clock inputs are connected.
+    minItems: 1
+    maxItems: 2
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ff000000 {
+      compatible = "adi,axi-clkgen-2.00.a";
+      #clock-cells = <0>;
+      reg = <0xff000000 0x1000>;
+      clocks = <&osc 1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
new file mode 100644
index 000000000000..79b0752faa91
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EN7523 Clock
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <nbd@nbd.name>
+
+description: |
+  This node defines the System Control Unit of the EN7523 SoC,
+  a collection of registers configuring many different aspects of the SoC.
+
+  The clock driver uses it to read and configure settings of the
+  PLL controller, which provides clocks for the CPU, the bus and
+  other SoC internal peripherals.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify which clock they consume.
+
+  All these identifiers can be found in:
+  [1]: <include/dt-bindings/clock/en7523-clk.h>.
+
+  The clocks are provided inside a system controller node.
+
+properties:
+  compatible:
+    items:
+      - const: airoha,en7523-scu
+
+  reg:
+    maxItems: 2
+
+  "#clock-cells":
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/en7523-clk.h>
+    scu: system-controller@1fa20000 {
+      compatible = "airoha,en7523-scu";
+      reg = <0x1fa20000 0x400>,
+            <0x1fb00000 0x1000>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
index 558db4b6ed17..93587b700476 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ahb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 AHB Clock Device Tree Bindings
+title: Allwinner A10 AHB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
index b1e3d739beb2..e14e1aad9fd6 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 APB0 Bus Clock Device Tree Bindings
+title: Allwinner A10 APB0 Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
index 51b7a6d4ea54..8a4747ebe0ba 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb1-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 APB1 Bus Clock Device Tree Bindings
+title: Allwinner A10 APB1 Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
index d801158e15de..aa08dd49dd61 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-axi-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 AXI Clock Device Tree Bindings
+title: Allwinner A10 AXI Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
index 4d382128b711..1690b9d99c3d 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ccu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner Clock Control Unit Device Tree Bindings
+title: Allwinner Clock Control Unit
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -34,11 +34,17 @@ properties:
       - allwinner,sun8i-v3-ccu
       - allwinner,sun8i-v3s-ccu
       - allwinner,sun9i-a80-ccu
+      - allwinner,sun20i-d1-ccu
+      - allwinner,sun20i-d1-r-ccu
       - allwinner,sun50i-a64-ccu
       - allwinner,sun50i-a64-r-ccu
+      - allwinner,sun50i-a100-ccu
+      - allwinner,sun50i-a100-r-ccu
       - allwinner,sun50i-h5-ccu
       - allwinner,sun50i-h6-ccu
       - allwinner,sun50i-h6-r-ccu
+      - allwinner,sun50i-h616-ccu
+      - allwinner,sun50i-h616-r-ccu
       - allwinner,suniv-f1c100s-ccu
       - nextthing,gr8-ccu
 
@@ -47,7 +53,6 @@ properties:
 
   clocks:
     minItems: 2
-    maxItems: 4
     items:
       - description: High Frequency Oscillator (usually at 24MHz)
       - description: Low Frequency Oscillator (usually at 32kHz)
@@ -56,7 +61,6 @@ properties:
 
   clock-names:
     minItems: 2
-    maxItems: 4
     items:
       - const: hosc
       - const: losc
@@ -77,8 +81,11 @@ if:
       enum:
         - allwinner,sun8i-a83t-r-ccu
         - allwinner,sun8i-h3-r-ccu
+        - allwinner,sun20i-d1-r-ccu
         - allwinner,sun50i-a64-r-ccu
+        - allwinner,sun50i-a100-r-ccu
         - allwinner,sun50i-h6-r-ccu
+        - allwinner,sun50i-h616-r-ccu
 
 then:
   properties:
@@ -94,7 +101,11 @@ else:
   if:
     properties:
       compatible:
-        const: allwinner,sun50i-h6-ccu
+        enum:
+          - allwinner,sun20i-d1-ccu
+          - allwinner,sun50i-a100-ccu
+          - allwinner,sun50i-h6-ccu
+          - allwinner,sun50i-h616-ccu
 
   then:
     properties:
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
index 0dfafba1a168..08d073520cfa 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-cpu-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CPU Clock Device Tree Bindings
+title: Allwinner A10 CPU Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
index 7484a7ab7dea..e665e50c1785 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-display-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Clock Device Tree Bindings
+title: Allwinner A10 Display Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
index ed1b2126a81b..c4714d0fbe07 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-gates-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Bus Gates Clock Device Tree Bindings
+title: Allwinner A10 Bus Gates Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -52,12 +52,12 @@ properties:
       - const: allwinner,sun4i-a10-dram-gates-clk
 
       - items:
-        - const: allwinner,sun5i-a13-dram-gates-clk
-        - const: allwinner,sun4i-a10-gates-clk
+          - const: allwinner,sun5i-a13-dram-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
 
       - items:
-        - const: allwinner,sun8i-h3-apb0-gates-clk
-        - const: allwinner,sun4i-a10-gates-clk
+          - const: allwinner,sun8i-h3-apb0-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
index 18f131e262b4..e824e33489b6 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mbus-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 MBUS Clock Device Tree Bindings
+title: Allwinner A10 MBUS Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
index 5199285a661a..c612f94befb9 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mmc-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Module 1 Clock Device Tree Bindings
+title: Allwinner A10 Module 1 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
index 3e2abe3e67c1..80ae3a7a588c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Module 0 Clock Device Tree Bindings
+title: Allwinner A10 Module 0 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
index 7ddb55c75cff..4f9a8d44d42a 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod1-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Module 1 Clock Device Tree Bindings
+title: Allwinner A10 Module 1 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
index c604822cda07..52a7b6e7124c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Gatable Oscillator Clock Device Tree Bindings
+title: Allwinner A10 Gatable Oscillator Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
index e9c4cf834aa7..b13a1f21d5da 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll1-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CPU PLL Device Tree Bindings
+title: Allwinner A10 CPU PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -44,7 +44,7 @@ examples:
   - |
     clk@1c20000 {
         #clock-cells = <0>;
-        compatible = "allwinner,sun4i-a10-pll1";
+        compatible = "allwinner,sun4i-a10-pll1-clk";
         reg = <0x01c20000 0x4>;
         clocks = <&osc24M>;
         clock-output-names = "osc24M";
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
index 4b80a42fb3da..418d207d23b8 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll3-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Video PLL Device Tree Bindings
+title: Allwinner A10 Video PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
index 415bd77de53d..76ef3f0c7f2c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll5-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 DRAM PLL Device Tree Bindings
+title: Allwinner A10 DRAM PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
index ec5652f76027..a94c93c90ece 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll6-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Peripheral PLL Device Tree Bindings
+title: Allwinner A10 Peripheral PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
index 0a335c615efd..6646b2a99fc1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 TCON Channel 0 Clock Device Tree Bindings
+title: Allwinner A10 TCON Channel 0 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
index cd95d25bfe7c..5103b675e488 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-usb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 USB Clock Device Tree Bindings
+title: Allwinner A10 USB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
index 5dfd0c1c27b4..80337e38d6e5 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ve-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Video Engine Clock Device Tree Bindings
+title: Allwinner A10 Video Engine Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
index 99add7991c48..c6a6fbb6863b 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun5i-a13-ahb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A13 AHB Clock Device Tree Bindings
+title: Allwinner A13 AHB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
index 5f377205af71..7d6a6a34d20c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun6i-a31-pll6-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 Peripheral PLL Device Tree Bindings
+title: Allwinner A31 Peripheral PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
index 59e5dce1b65a..b6202de35707 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-gmac-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 GMAC TX Clock Device Tree Bindings
+title: Allwinner A20 GMAC TX Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
index c745733bcf04..fde7f7dc3d34 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-out-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 Output Clock Device Tree Bindings
+title: Allwinner A20 Output Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
index 3f995d2b30eb..70369bd633e4 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t Display Engine 2/3 Clock Controller Device Tree Bindings
+title: Allwinner A83t Display Engine 2/3 Clock Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -24,10 +24,13 @@ properties:
       - const: allwinner,sun8i-v3s-de2-clk
       - const: allwinner,sun50i-a64-de2-clk
       - const: allwinner,sun50i-h5-de2-clk
-      - const: allwinner,sun50i-h6-de2-clk
+      - const: allwinner,sun50i-h6-de3-clk
       - items:
           - const: allwinner,sun8i-r40-de2-clk
           - const: allwinner,sun8i-h3-de2-clk
+      - items:
+          - const: allwinner,sun20i-d1-de2-clk
+          - const: allwinner,sun50i-h5-de2-clk
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
index 3eb2bf65b230..45b9e2c7c1d1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun8i-h3-bus-gates-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Bus Gates Clock Device Tree Bindings
+title: Allwinner A10 Bus Gates Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
index d178da90aaec..f0f65af8ae22 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-ahb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 AHB Clock Device Tree Bindings
+title: Allwinner A80 AHB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
index 0351c79bd221..e9f9bc8f5794 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-apb0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 APB0 Bus Clock Device Tree Bindings
+title: Allwinner A80 APB0 Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
index 24d5b2f1a314..c48db2d49340 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-cpus-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 CPUS Clock Device Tree Bindings
+title: Allwinner A80 CPUS Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
index a82c7c7e942b..e9f81a343be1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-de-clks.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 Display Engine Clock Controller Device Tree Bindings
+title: Allwinner A80 Display Engine Clock Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
index 43963c3062c8..d3ce5eb18d4e 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-gt-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 GT Bus Clock Device Tree Bindings
+title: Allwinner A80 GT Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
index 20dc115fa211..65ee5afe83cc 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-mmc-config-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 MMC Configuration Clock Device Tree Bindings
+title: Allwinner A80 MMC Configuration Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
index b76bab6a30e9..261264a8aef6 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-pll4-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 Peripheral PLL Device Tree Bindings
+title: Allwinner A80 Peripheral PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
new file mode 100644
index 000000000000..515c15d5f661
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB Clock Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-clks
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: High Frequency Oscillator
+
+  clock-names:
+    items:
+      - const: bus
+      - const: hosc
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-ccu.h>
+
+    usb_clocks: clock@a08000 {
+        compatible = "allwinner,sun9i-a80-usb-clks";
+        reg = <0x00a08000 0x8>;
+        clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+        clock-names = "bus", "hosc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml
deleted file mode 100644
index fa0ee03a527f..000000000000
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml
+++ /dev/null
@@ -1,59 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clocks.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Allwinner A80 USB Clock Controller Device Tree Bindings
-
-maintainers:
-  - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <mripard@kernel.org>
-
-properties:
-  "#clock-cells":
-    const: 1
-
-  "#reset-cells":
-    const: 1
-
-  compatible:
-    const: allwinner,sun9i-a80-usb-clocks
-
-  reg:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: Bus Clock
-      - description: High Frequency Oscillator
-
-  clock-names:
-    items:
-      - const: bus
-      - const: hosc
-
-required:
-  - "#clock-cells"
-  - "#reset-cells"
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/sun9i-a80-ccu.h>
-
-    usb_clocks: clock@a08000 {
-        compatible = "allwinner,sun9i-a80-usb-clks";
-        reg = <0x00a08000 0x8>;
-        clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
-        clock-names = "bus", "hosc";
-        #clock-cells = <1>;
-        #reset-cells = <1>;
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
index 15218d10e78e..3f7b8d9511f1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-mod-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 USB Module Clock Device Tree Bindings
+title: Allwinner A80 USB Module Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
index 2569041684e6..0d49072d47ca 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-phy-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 USB PHY Clock Device Tree Bindings
+title: Allwinner A80 USB PHY Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
index 4b8669f870ec..d98d95d8e8c9 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/amlogic,meson8-ddr-clkc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amlogic DDR Clock Controller Device Tree Bindings
+title: Amlogic DDR Clock Controller
 
 maintainers:
   - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
diff --git a/Documentation/devicetree/bindings/clock/apple,nco.yaml b/Documentation/devicetree/bindings/clock/apple,nco.yaml
new file mode 100644
index 000000000000..74eab5c0d24a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/apple,nco.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/apple,nco.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoCs' NCO block
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+description: |
+  The NCO (Numerically Controlled Oscillator) block found on Apple SoCs
+  such as the t8103 (M1) is a programmable clock generator performing
+  fractional division of a high frequency input clock.
+
+  It carries a number of independent channels and is typically used for
+  generation of audio bitclocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t6000-nco
+          - apple,t8103-nco
+      - const: apple,nco
+
+  clocks:
+    description:
+      Specifies the reference clock from which the output clocks
+      are derived through fractional division.
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    nco_clkref: clock-ref {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <900000000>;
+      clock-output-names = "nco-ref";
+    };
+
+    nco: clock-controller@23b044000 {
+      compatible = "apple,t8103-nco", "apple,nco";
+      reg = <0x3b044000 0x14000>;
+      #clock-cells = <1>;
+      clocks = <&nco_clkref>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
new file mode 100644
index 000000000000..90eadf6869b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/arm,syscon-icst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM System Controller ICST Clocks
+
+maintainers:
+  - Linus Walleij <linusw@kernel.org>
+
+description: |
+  The ICS525 and ICS307 oscillators are produced by Integrated
+  Devices Technology (IDT). ARM integrated these oscillators deeply into their
+  reference designs by adding special control registers that manage such
+  oscillators to their system controllers.
+
+  The various ARM system controllers contain logic to serialize and initialize
+  an ICST clock request after a write to the 32 bit register at an offset
+  into the system controller. Furthermore, to even be able to alter one of
+  these frequencies, the system controller must first be unlocked by
+  writing a special token to another offset in the system controller.
+
+  Some ARM hardware contain special versions of the serial interface that only
+  connects the low 8 bits of the VDW (missing one bit), hard-wires RDW to
+  different values and sometimes also hard-wires the output divider. They
+  therefore have special compatible strings as per this table (the OD value is
+  the value on the pins, not the resulting output divider).
+
+  In the core modules and logic tiles, the ICST is a configurable clock fed
+  from a 24 MHz clock on the motherboard (usually the main crystal) used for
+  generating e.g. video clocks. It is located on the core module and there is
+  only one of these. This clock node must be a subnode of the core module.
+
+  Hardware variant         RDW     OD          VDW
+
+  Integrator/AP            22      1           Bit 8 0, rest variable
+  integratorap-cm
+
+  Integrator/AP            46      3           Bit 8 0, rest variable
+  integratorap-sys
+
+  Integrator/AP            22 or   1           17 or (33 or 25 MHz)
+  integratorap-pci         14      1           14
+
+  Integrator/CP            22      variable    Bit 8 0, rest variable
+  integratorcp-cm-core
+
+  Integrator/CP            22      variable    Bit 8 0, rest variable
+  integratorcp-cm-mem
+
+  The ICST oscillator must be provided inside a system controller node.
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - arm,syscon-icst525
+      - arm,syscon-icst307
+      - arm,syscon-icst525-integratorap-cm
+      - arm,syscon-icst525-integratorap-sys
+      - arm,syscon-icst525-integratorap-pci
+      - arm,syscon-icst525-integratorcp-cm-core
+      - arm,syscon-icst525-integratorcp-cm-mem
+      - arm,integrator-cm-auxosc
+      - arm,versatile-cm-auxosc
+      - arm,impd1-vco1
+      - arm,impd1-vco2
+
+  reg:
+    maxItems: 1
+    description: The VCO register
+
+  clocks:
+    description: Parent clock for the ICST VCO
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+  lock-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: Offset to the unlocking register for the oscillator
+
+  vco-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: Offset to the VCO register for the oscillator
+    deprecated: true
+
+required:
+  - "#clock-cells"
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    vco1: clock {
+      compatible = "arm,impd1-vco1";
+      #clock-cells = <0>;
+      lock-offset = <0x08>;
+      vco-offset = <0x00>;
+      clocks = <&sysclk>;
+      clock-output-names = "IM-PD1-VCO1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt
deleted file mode 100644
index 11f5f95f571b..000000000000
--- a/Documentation/devicetree/bindings/clock/arm-integrator.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Clock bindings for ARM Integrator and Versatile Core Module clocks
-
-Auxiliary Oscillator Clock
-
-This is a configurable clock fed from a 24 MHz chrystal,
-used for generating e.g. video clocks. It is located on the
-core module and there is only one of these.
-
-This clock node *must* be a subnode of the core module, since
-it obtains the base address for it's address range from its
-parent node.
-
-
-Required properties:
-- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc"
-- #clock-cells: must be <0>
-
-Optional properties:
-- clocks: parent clock(s)
-
-Example:
-
-core-module@10000000 {
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-	auxosc: cm_aux_osc@25M {
-		#clock-cells = <0>;
-		compatible = "arm,integrator-cm-auxosc";
-		clocks = <&xtal24mhz>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
deleted file mode 100644
index 4cd81742038f..000000000000
--- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-ARM System Controller ICST clocks
-
-The ICS525 and ICS307 oscillators are produced by Integrated Devices
-Technology (IDT). ARM integrated these oscillators deeply into their
-reference designs by adding special control registers that manage such
-oscillators to their system controllers.
-
-The various ARM system controllers contain logic to serialize and initialize
-an ICST clock request after a write to the 32 bit register at an offset
-into the system controller. Furthermore, to even be able to alter one of
-these frequencies, the system controller must first be unlocked by
-writing a special token to another offset in the system controller.
-
-Some ARM hardware contain special versions of the serial interface that only
-connects the low 8 bits of the VDW (missing one bit), hardwires RDW to
-different values and sometimes also hardwire the output divider. They
-therefore have special compatible strings as per this table (the OD value is
-the value on the pins, not the resulting output divider):
-
-Hardware variant:        RDW     OD          VDW
-
-Integrator/AP            22      1           Bit 8 0, rest variable
-integratorap-cm
-
-Integrator/AP            46      3           Bit 8 0, rest variable
-integratorap-sys
-
-Integrator/AP            22 or   1           17 or (33 or 25 MHz)
-integratorap-pci         14      1           14
-
-Integrator/CP            22      variable    Bit 8 0, rest variable
-integratorcp-cm-core
-
-Integrator/CP            22      variable    Bit 8 0, rest variable
-integratorcp-cm-mem
-
-The ICST oscillator must be provided inside a system controller node.
-
-Required properties:
-- compatible: must be one of
-  "arm,syscon-icst525"
-  "arm,syscon-icst307"
-  "arm,syscon-icst525-integratorap-cm"
-  "arm,syscon-icst525-integratorap-sys"
-  "arm,syscon-icst525-integratorap-pci"
-  "arm,syscon-icst525-integratorcp-cm-core"
-  "arm,syscon-icst525-integratorcp-cm-mem"
-- lock-offset: the offset address into the system controller where the
-  unlocking register is located
-- vco-offset: the offset address into the system controller where the
-  ICST control register is located (even 32 bit address)
-- #clock-cells: must be <0>
-- clocks: parent clock, since the ICST needs a parent clock to derive its
-  frequency from, this attribute is compulsory.
-
-Example:
-
-syscon: syscon@10000000 {
-	compatible = "syscon";
-	reg = <0x10000000 0x1000>;
-
-	oscclk0: osc0@c {
-		compatible = "arm,syscon-icst307";
-		#clock-cells = <0>;
-		lock-offset = <0x20>;
-		vco-offset = <0x0c>;
-		clocks = <&xtal24mhz>;
-	};
-	(...)
-};
diff --git a/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt
index 0ba1d83ff363..ed1df32c577a 100644
--- a/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt
+++ b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt
@@ -1,6 +1,6 @@
 * Time Base Generator Clock bindings for Marvell Armada 37xx SoCs
 
-Marvell Armada 37xx SoCs provde Time Base Generator clocks which are
+Marvell Armada 37xx SoCs provide Time Base Generator clocks which are
 used as parent clocks for the peripheral clocks.
 
 The TBG clock consumer should specify the desired clock by having the
diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt b/Documentation/devicetree/bindings/clock/axi-clkgen.txt
deleted file mode 100644
index aca94fe9416f..000000000000
--- a/Documentation/devicetree/bindings/clock/axi-clkgen.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Binding for the axi-clkgen clock generator
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "adi,axi-clkgen-1.00.a" or "adi,axi-clkgen-2.00.a".
-- #clock-cells : from common clock binding; Should always be set to 0.
-- reg : Address and length of the axi-clkgen register set.
-- clocks : Phandle and clock specifier for the parent clock(s). This must
-	either reference one clock if only the first clock input is connected or two
-	if both clock inputs are connected. For the later case the clock connected
-	to the first input must be specified first.
-
-Optional properties:
-- clock-output-names : From common clock binding.
-
-Example:
-	clock@ff000000 {
-		compatible = "adi,axi-clkgen";
-		#clock-cells = <0>;
-		reg = <0xff000000 0x1000>;
-		clocks = <&osc 1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
new file mode 100644
index 000000000000..bd4cefbb1244
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-div.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 Clock Control Unit Dividers
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  Clocks Control Unit is the core of Baikal-T1 SoC System Controller
+  responsible for the chip subsystems clocking and resetting. The CCU is
+  connected with an external fixed rate oscillator, which signal is transformed
+  into clocks of various frequencies and then propagated to either individual
+  IP-blocks or to groups of blocks (clock domains). The transformation is done
+  by means of an embedded into CCU PLLs and gateable/non-gateable dividers. The
+  later ones are described in this binding. Each clock domain can be also
+  individually reset by using the domain clocks divider configuration
+  registers. Baikal-T1 CCU is logically divided into the next components:
+  1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
+     in general can provide any frequency supported by the CCU PLLs).
+  2) PLLs clocks generators (PLLs).
+  3) AXI-bus clock dividers (AXI) - described in this binding file.
+  4) System devices reference clock dividers (SYS) - described in this binding
+     file.
+  which are connected with each other as shown on the next figure:
+
+          +---------------+
+          | Baikal-T1 CCU |
+          |   +----+------|- MIPS P5600 cores
+          | +-|PLLs|------|- DDR controller
+          | | +----+      |
+  +----+  | |  |  |       |
+  |XTAL|--|-+  |  | +---+-|
+  +----+  | |  |  +-|AXI|-|- AXI-bus
+          | |  |    +---+-|
+          | |  |          |
+          | |  +----+---+-|- APB-bus
+          | +-------|SYS|-|- Low-speed Devices
+          |         +---+-|- High-speed Devices
+          +---------------+
+
+  Each sub-block is represented as a separate DT node and has an individual
+  driver to be bound with.
+
+  In order to create signals of wide range frequencies the external oscillator
+  output is primarily connected to a set of CCU PLLs. Some of PLLs CLKOUT are
+  then passed over CCU dividers to create signals required for the target clock
+  domain (like AXI-bus or System Device consumers). The dividers have the
+  following structure:
+
+          +--------------+
+  CLKIN --|->+----+ 1|\  |
+  SETCLK--|--|/DIV|->| | |
+  CLKDIV--|--|    |  | |-|->CLKLOUT
+  LOCK----|--+----+  | | |
+          |          |/  |
+          |           |  |
+  EN------|-----------+  |
+  RST-----|--------------|->RSTOUT
+          +--------------+
+
+  where CLKIN is the reference clock coming either from CCU PLLs or from an
+  external clock oscillator, SETCLK - a command to update the output clock in
+  accordance with a set divider, CLKDIV - clocks divider, LOCK - a signal of
+  the output clock stabilization, EN - enable/disable the divider block,
+  RST/RSTOUT - reset clocks domain signal. Depending on the consumer IP-core
+  peculiarities the dividers may lack of some functionality depicted on the
+  figure above (like EN, CLKDIV/LOCK/SETCLK). In this case the corresponding
+  clock provider just doesn't expose either switching functions, or the rate
+  configuration, or both of them.
+
+  The clock dividers, which output clock is then consumed by the SoC individual
+  devices, are united into a single clocks provider called System Devices CCU.
+  Similarly the dividers with output clocks utilized as AXI-bus reference clocks
+  are called AXI-bus CCU. Both of them use the common clock bindings with no
+  custom properties. The list of exported clocks and reset signals can be found
+  in the files: 'include/dt-bindings/clock/bt1-ccu.h' and
+  'include/dt-bindings/reset/bt1-ccu.h'. Since System Devices and AXI-bus CCU
+  are a part of the Baikal-T1 SoC System Controller their DT nodes are supposed
+  to be a children of later one.
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: baikal,bt1-ccu-axi
+
+then:
+  properties:
+    clocks:
+      items:
+        - description: CCU SATA PLL output clock
+        - description: CCU PCIe PLL output clock
+        - description: CCU Ethernet PLL output clock
+
+    clock-names:
+      items:
+        - const: sata_clk
+        - const: pcie_clk
+        - const: eth_clk
+
+else:
+  properties:
+    clocks:
+      items:
+        - description: External reference clock
+        - description: CCU SATA PLL output clock
+        - description: CCU PCIe PLL output clock
+        - description: CCU Ethernet PLL output clock
+
+    clock-names:
+      items:
+        - const: ref_clk
+        - const: sata_clk
+        - const: pcie_clk
+        - const: eth_clk
+
+properties:
+  compatible:
+    enum:
+      - baikal,bt1-ccu-axi
+      - baikal,bt1-ccu-sys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks: true
+
+  clock-names: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+examples:
+  # AXI-bus Clock Control Unit node:
+  - |
+    #include <dt-bindings/clock/bt1-ccu.h>
+
+    clock-controller@1f04d030 {
+      compatible = "baikal,bt1-ccu-axi";
+      reg = <0x1f04d030 0x030>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+
+      clocks = <&ccu_pll CCU_SATA_PLL>,
+               <&ccu_pll CCU_PCIE_PLL>,
+               <&ccu_pll CCU_ETH_PLL>;
+      clock-names = "sata_clk", "pcie_clk", "eth_clk";
+    };
+  # System Devices Clock Control Unit node:
+  - |
+    #include <dt-bindings/clock/bt1-ccu.h>
+
+    clock-controller@1f04d060 {
+      compatible = "baikal,bt1-ccu-sys";
+      reg = <0x1f04d060 0x0a0>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+
+      clocks = <&clk25m>,
+               <&ccu_pll CCU_SATA_PLL>,
+               <&ccu_pll CCU_PCIE_PLL>,
+               <&ccu_pll CCU_ETH_PLL>;
+      clock-names = "ref_clk", "sata_clk", "pcie_clk",
+                    "eth_clk";
+    };
+  # Required Clock Control Unit PLL node:
+  - |
+    ccu_pll: clock-controller@1f04d000 {
+      compatible = "baikal,bt1-ccu-pll";
+      reg = <0x1f04d000 0x028>;
+      #clock-cells = <1>;
+
+      clocks = <&clk25m>;
+      clock-names = "ref_clk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
new file mode 100644
index 000000000000..624984d51c10
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 Clock Control Unit PLL
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  Clocks Control Unit is the core of Baikal-T1 SoC System Controller
+  responsible for the chip subsystems clocking and resetting. The CCU is
+  connected with an external fixed rate oscillator, which signal is transformed
+  into clocks of various frequencies and then propagated to either individual
+  IP-blocks or to groups of blocks (clock domains). The transformation is done
+  by means of PLLs and gateable/non-gateable dividers embedded into the CCU.
+  It's logically divided into the next components:
+  1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
+     in general can provide any frequency supported by the CCU PLLs).
+  2) PLLs clocks generators (PLLs) - described in this binding file.
+  3) AXI-bus clock dividers (AXI).
+  4) System devices reference clock dividers (SYS).
+  which are connected with each other as shown on the next figure:
+
+          +---------------+
+          | Baikal-T1 CCU |
+          |   +----+------|- MIPS P5600 cores
+          | +-|PLLs|------|- DDR controller
+          | | +----+      |
+  +----+  | |  |  |       |
+  |XTAL|--|-+  |  | +---+-|
+  +----+  | |  |  +-|AXI|-|- AXI-bus
+          | |  |    +---+-|
+          | |  |          |
+          | |  +----+---+-|- APB-bus
+          | +-------|SYS|-|- Low-speed Devices
+          |         +---+-|- High-speed Devices
+          +---------------+
+
+  Each CCU sub-block is represented as a separate dts-node and has an
+  individual driver to be bound with.
+
+  In order to create signals of wide range frequencies the external oscillator
+  output is primarily connected to a set of CCU PLLs. There are five PLLs
+  to create a clock for the MIPS P5600 cores, the embedded DDR controller,
+  SATA, Ethernet and PCIe domains. The last three domains though named by the
+  biggest system interfaces in fact include nearly all of the rest SoC
+  peripherals. Each of the PLLs is based on True Circuits TSMC CLN28HPM core
+  with an interface wrapper (so called safe PLL' clocks switcher) to simplify
+  the PLL configuration procedure. The PLLs work as depicted on the next
+  diagram:
+
+      +--------------------------+
+      |                          |
+      +-->+---+    +---+   +---+ |  +---+   0|\
+  CLKF--->|/NF|--->|PFD|...|VCO|-+->|/OD|--->| |
+          +---+ +->+---+   +---+ /->+---+    | |--->CLKOUT
+  CLKOD---------C----------------+          1| |
+       +--------C--------------------------->|/
+       |        |                             ^
+  Rclk-+->+---+ |                             |
+  CLKR--->|/NR|-+                             |
+          +---+                               |
+  BYPASS--------------------------------------+
+  BWADJ--->
+
+  where Rclk is the reference clock coming  from XTAL, NR - reference clock
+  divider, NF - PLL clock multiplier, OD - VCO output clock divider, CLKOUT -
+  output clock, BWADJ is the PLL bandwidth adjustment parameter. At this moment
+  the binding supports the PLL dividers configuration in accordance with a
+  requested rate, while bypassing and bandwidth adjustment settings can be
+  added in future if it gets to be necessary.
+
+  The PLLs CLKOUT is then either directly connected with the corresponding
+  clocks consumer (like P5600 cores or DDR controller) or passed over a CCU
+  divider to create a signal required for the clock domain.
+
+  The CCU PLL dts-node uses the common clock bindings with no custom
+  parameters. The list of exported clocks can be found in
+  'include/dt-bindings/clock/bt1-ccu.h'. Since CCU PLL is a part of the
+  Baikal-T1 SoC System Controller its DT node is supposed to be a child of
+  later one.
+
+properties:
+  compatible:
+    const: baikal,bt1-ccu-pll
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    description: External reference clock
+    maxItems: 1
+
+  clock-names:
+    const: ref_clk
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+examples:
+  # Clock Control Unit PLL node:
+  - |
+    clock-controller@1f04d000 {
+      compatible = "baikal,bt1-ccu-pll";
+      reg = <0x1f04d000 0x028>;
+      #clock-cells = <1>;
+
+      clocks = <&clk25m>;
+      clock-names = "ref_clk";
+    };
+  # Required external oscillator:
+  - |
+    clk25m: clock-oscillator-25m {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency  = <25000000>;
+      clock-output-names = "clk25m";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
index 8559fe8f7efd..f0f9392470a6 100644
--- a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
@@ -61,16 +61,4 @@ examples:
         #clock-cells = <1>;
     };
 
-  # Example UART controller node that consumes clock generated by the clock controller:
-  - |
-    uart0: serial@58018000 {
-         compatible = "snps,dw-apb-uart";
-         reg = <0x0 0x58018000 0x0 0x2000>;
-         clocks = <&clk 45>, <&clk 46>;
-         clock-names = "baudclk", "apb_pclk";
-         interrupts = <0 9 4>;
-         reg-shift = <2>;
-         reg-io-width = <4>;
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
new file mode 100644
index 000000000000..2d40df2d34df
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm2711-dvp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711 HDMI DVP
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: brcm,brcm2711-dvp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    dvp: clock@7ef00000 {
+        compatible = "brcm,brcm2711-dvp";
+        reg = <0x7ef00000 0x10>;
+        clocks = <&clk_108MHz>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt
index 3041657e2f96..3e7ca5530775 100644
--- a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt
@@ -3,6 +3,8 @@ Gated Clock Controller Bindings for MIPS based BCM63XX SoCs
 Required properties:
 - compatible: must be one of:
 	 "brcm,bcm3368-clocks"
+	 "brcm,bcm6318-clocks"
+	 "brcm,bcm6318-ubus-clocks"
 	 "brcm,bcm6328-clocks"
 	 "brcm,bcm6358-clocks"
 	 "brcm,bcm6362-clocks"
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
deleted file mode 100644
index ab730ea0a560..000000000000
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ /dev/null
@@ -1,313 +0,0 @@
-Broadcom iProc Family Clocks
-
-This binding uses the common clock binding:
-    Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The iProc clock controller manages clocks that are common to the iProc family.
-An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL,
-LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
-comprises of several leaf clocks
-
-Required properties for a PLL and its leaf clocks:
-
-- compatible:
-    Should have a value of the form "brcm,<soc>-<pll>". For example, GENPLL on
-Cygnus has a compatible string of "brcm,cygnus-genpll"
-
-- #clock-cells:
-    Have a value of <1> since there are more than 1 leaf clock of a given PLL
-
-- reg:
-    Define the base and range of the I/O address space that contain the iProc
-clock control registers required for the PLL
-
-- clocks:
-    The input parent clock phandle for the PLL. For most iProc PLLs, this is an
-onboard crystal with a fixed rate
-
-- clock-output-names:
-    An ordered list of strings defining the names of the clocks
-
-Example:
-
-	osc: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	genpll: genpll {
-		#clock-cells = <1>;
-		compatible = "brcm,cygnus-genpll";
-		reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
-		clocks = <&osc>;
-		clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
-				     "enet_sw", "audio_125", "can";
-	};
-
-Required properties for ASIU clocks:
-
-ASIU clocks are a special case. These clocks are derived directly from the
-reference clock of the onboard crystal
-
-- compatible:
-    Should have a value of the form "brcm,<soc>-asiu-clk". For example, ASIU
-clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk"
-
-- #clock-cells:
-    Have a value of <1> since there are more than 1 ASIU clocks
-
-- reg:
-    Define the base and range of the I/O address space that contain the iProc
-clock control registers required for ASIU clocks
-
-- clocks:
-    The input parent clock phandle for the ASIU clock, i.e., the onboard
-crystal
-
-- clock-output-names:
-    An ordered list of strings defining the names of the ASIU clocks
-
-Example:
-
-	osc: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	asiu_clks: asiu_clks {
-		#clock-cells = <1>;
-		compatible = "brcm,cygnus-asiu-clk";
-		reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
-		clocks = <&osc>;
-		clock-output-names = "keypad", "adc/touch", "pwm";
-	};
-
-Cygnus
-------
-PLL and leaf clock compatible strings for Cygnus are:
-    "brcm,cygnus-armpll"
-    "brcm,cygnus-genpll"
-    "brcm,cygnus-lcpll0"
-    "brcm,cygnus-mipipll"
-    "brcm,cygnus-asiu-clk"
-    "brcm,cygnus-audiopll"
-
-The following table defines the set of PLL/clock index and ID for Cygnus.
-These clock IDs are defined in:
-    "include/dt-bindings/clock/bcm-cygnus.h"
-
-    Clock      Source (Parent)  Index   ID
-    ---        -----            -----   ---------
-    crystal    N/A              N/A     N/A
-
-    armpll     crystal          N/A     N/A
-
-    keypad     crystal (ASIU)   0       BCM_CYGNUS_ASIU_KEYPAD_CLK
-    adc/tsc    crystal (ASIU)   1       BCM_CYGNUS_ASIU_ADC_CLK
-    pwm        crystal (ASIU)   2       BCM_CYGNUS_ASIU_PWM_CLK
-
-    genpll     crystal          0       BCM_CYGNUS_GENPLL
-    axi21      genpll           1       BCM_CYGNUS_GENPLL_AXI21_CLK
-    250mhz     genpll           2       BCM_CYGNUS_GENPLL_250MHZ_CLK
-    ihost_sys  genpll           3       BCM_CYGNUS_GENPLL_IHOST_SYS_CLK
-    enet_sw    genpll           4       BCM_CYGNUS_GENPLL_ENET_SW_CLK
-    audio_125  genpll           5       BCM_CYGNUS_GENPLL_AUDIO_125_CLK
-    can        genpll           6       BCM_CYGNUS_GENPLL_CAN_CLK
-
-    lcpll0     crystal          0       BCM_CYGNUS_LCPLL0
-    pcie_phy   lcpll0           1       BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK
-    ddr_phy    lcpll0           2       BCM_CYGNUS_LCPLL0_DDR_PHY_CLK
-    sdio       lcpll0           3       BCM_CYGNUS_LCPLL0_SDIO_CLK
-    usb_phy    lcpll0           4       BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK
-    smart_card lcpll0           5       BCM_CYGNUS_LCPLL0_SMART_CARD_CLK
-    ch5_unused lcpll0           6       BCM_CYGNUS_LCPLL0_CH5_UNUSED
-
-    mipipll    crystal          0       BCM_CYGNUS_MIPIPLL
-    ch0_unused mipipll          1       BCM_CYGNUS_MIPIPLL_CH0_UNUSED
-    ch1_lcd    mipipll          2       BCM_CYGNUS_MIPIPLL_CH1_LCD
-    ch2_v3d    mipipll          3       BCM_CYGNUS_MIPIPLL_CH2_V3D
-    ch3_unused mipipll          4       BCM_CYGNUS_MIPIPLL_CH3_UNUSED
-    ch4_unused mipipll          5       BCM_CYGNUS_MIPIPLL_CH4_UNUSED
-    ch5_unused mipipll          6       BCM_CYGNUS_MIPIPLL_CH5_UNUSED
-
-    audiopll   crystal          0       BCM_CYGNUS_AUDIOPLL
-    ch0_audio  audiopll         1       BCM_CYGNUS_AUDIOPLL_CH0
-    ch1_audio  audiopll         2       BCM_CYGNUS_AUDIOPLL_CH1
-    ch2_audio  audiopll         3       BCM_CYGNUS_AUDIOPLL_CH2
-
-Hurricane 2
-------
-PLL and leaf clock compatible strings for Hurricane 2 are:
- "brcm,hr2-armpll"
-
-The following table defines the set of PLL/clock for Hurricane 2:
-
-    Clock	Source		Index	ID
-    ---		-----		-----	---------
-    crystal	N/A		N/A	N/A
-
-    armpll	crystal		N/A	N/A
-
-
-Northstar and Northstar Plus
-------
-PLL and leaf clock compatible strings for Northstar and Northstar Plus are:
- "brcm,nsp-armpll"
- "brcm,nsp-genpll"
- "brcm,nsp-lcpll0"
-
-The following table defines the set of PLL/clock index and ID for Northstar and
-Northstar Plus.  These clock IDs are defined in:
-    "include/dt-bindings/clock/bcm-nsp.h"
-
-    Clock	Source		Index	ID
-    ---		-----		-----	---------
-    crystal	N/A		N/A	N/A
-
-    armpll	crystal		N/A	N/A
-
-    genpll	crystal		0	BCM_NSP_GENPLL
-    phy		genpll		1	BCM_NSP_GENPLL_PHY_CLK
-    ethernetclk	genpll		2	BCM_NSP_GENPLL_ENET_SW_CLK
-    usbclk	genpll		3	BCM_NSP_GENPLL_USB_PHY_REF_CLK
-    iprocfast	genpll		4	BCM_NSP_GENPLL_IPROCFAST_CLK
-    sata1	genpll		5	BCM_NSP_GENPLL_SATA1_CLK
-    sata2	genpll		6	BCM_NSP_GENPLL_SATA2_CLK
-
-    lcpll0	crystal		0	BCM_NSP_LCPLL0
-    pcie_phy	lcpll0		1	BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
-    sdio	lcpll0		2	BCM_NSP_LCPLL0_SDIO_CLK
-    ddr_phy	lcpll0		3	BCM_NSP_LCPLL0_DDR_PHY_CLK
-
-Northstar 2
------------
-PLL and leaf clock compatible strings for Northstar 2 are:
-    "brcm,ns2-genpll-scr"
-    "brcm,ns2-genpll-sw"
-    "brcm,ns2-lcpll-ddr"
-    "brcm,ns2-lcpll-ports"
-
-The following table defines the set of PLL/clock index and ID for Northstar 2.
-These clock IDs are defined in:
-    "include/dt-bindings/clock/bcm-ns2.h"
-
-    Clock	Source		Index	ID
-    ---		-----		-----	---------
-    crystal	N/A		N/A	N/A
-
-    genpll_scr	crystal		0	BCM_NS2_GENPLL_SCR
-    scr		genpll_scr	1	BCM_NS2_GENPLL_SCR_SCR_CLK
-    fs		genpll_scr	2	BCM_NS2_GENPLL_SCR_FS_CLK
-    audio_ref	genpll_scr	3	BCM_NS2_GENPLL_SCR_AUDIO_CLK
-    ch3_unused	genpll_scr	4	BCM_NS2_GENPLL_SCR_CH3_UNUSED
-    ch4_unused	genpll_scr	5	BCM_NS2_GENPLL_SCR_CH4_UNUSED
-    ch5_unused	genpll_scr	6	BCM_NS2_GENPLL_SCR_CH5_UNUSED
-
-    genpll_sw	crystal		0	BCM_NS2_GENPLL_SW
-    rpe		genpll_sw	1	BCM_NS2_GENPLL_SW_RPE_CLK
-    250		genpll_sw	2	BCM_NS2_GENPLL_SW_250_CLK
-    nic		genpll_sw	3	BCM_NS2_GENPLL_SW_NIC_CLK
-    chimp	genpll_sw	4	BCM_NS2_GENPLL_SW_CHIMP_CLK
-    port	genpll_sw	5	BCM_NS2_GENPLL_SW_PORT_CLK
-    sdio	genpll_sw	6	BCM_NS2_GENPLL_SW_SDIO_CLK
-
-    lcpll_ddr	crystal		0	BCM_NS2_LCPLL_DDR
-    pcie_sata_usb lcpll_ddr	1	BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
-    ddr		lcpll_ddr	2	BCM_NS2_LCPLL_DDR_DDR_CLK
-    ch2_unused	lcpll_ddr	3	BCM_NS2_LCPLL_DDR_CH2_UNUSED
-    ch3_unused	lcpll_ddr	4	BCM_NS2_LCPLL_DDR_CH3_UNUSED
-    ch4_unused	lcpll_ddr	5	BCM_NS2_LCPLL_DDR_CH4_UNUSED
-    ch5_unused	lcpll_ddr	6	BCM_NS2_LCPLL_DDR_CH5_UNUSED
-
-    lcpll_ports	crystal		0	BCM_NS2_LCPLL_PORTS
-    wan		lcpll_ports	1	BCM_NS2_LCPLL_PORTS_WAN_CLK
-    rgmii	lcpll_ports	2	BCM_NS2_LCPLL_PORTS_RGMII_CLK
-    ch2_unused	lcpll_ports	3	BCM_NS2_LCPLL_PORTS_CH2_UNUSED
-    ch3_unused	lcpll_ports	4	BCM_NS2_LCPLL_PORTS_CH3_UNUSED
-    ch4_unused	lcpll_ports	5	BCM_NS2_LCPLL_PORTS_CH4_UNUSED
-    ch5_unused	lcpll_ports	6	BCM_NS2_LCPLL_PORTS_CH5_UNUSED
-
-BCM63138
---------
-PLL and leaf clock compatible strings for BCM63138 are:
-    "brcm,bcm63138-armpll"
-
-Stingray
------------
-PLL and leaf clock compatible strings for Stingray are:
-    "brcm,sr-genpll0"
-    "brcm,sr-genpll1"
-    "brcm,sr-genpll2"
-    "brcm,sr-genpll3"
-    "brcm,sr-genpll4"
-    "brcm,sr-genpll5"
-    "brcm,sr-genpll6"
-
-    "brcm,sr-lcpll0"
-    "brcm,sr-lcpll1"
-    "brcm,sr-lcpll-pcie"
-
-
-The following table defines the set of PLL/clock index and ID for Stingray.
-These clock IDs are defined in:
-    "include/dt-bindings/clock/bcm-sr.h"
-
-    Clock		Source		Index	ID
-    ---			-----		-----	---------
-    crystal		N/A		N/A	N/A
-    crmu_ref25m		crystal		N/A	N/A
-
-    genpll0		crystal		0	BCM_SR_GENPLL0
-    clk_125m		genpll0		1	BCM_SR_GENPLL0_125M_CLK
-    clk_scr		genpll0		2	BCM_SR_GENPLL0_SCR_CLK
-    clk_250		genpll0		3	BCM_SR_GENPLL0_250M_CLK
-    clk_pcie_axi	genpll0		4	BCM_SR_GENPLL0_PCIE_AXI_CLK
-    clk_paxc_axi_x2	genpll0		5	BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
-    clk_paxc_axi	genpll0		6	BCM_SR_GENPLL0_PAXC_AXI_CLK
-
-    genpll1		crystal		0	BCM_SR_GENPLL1
-    clk_pcie_tl		genpll1		1	BCM_SR_GENPLL1_PCIE_TL_CLK
-    clk_mhb_apb		genpll1		2	BCM_SR_GENPLL1_MHB_APB_CLK
-
-    genpll2		crystal		0	BCM_SR_GENPLL2
-    clk_nic		genpll2		1	BCM_SR_GENPLL2_NIC_CLK
-    clk_ts_500_ref	genpll2		2	BCM_SR_GENPLL2_TS_500_REF_CLK
-    clk_125_nitro	genpll2		3	BCM_SR_GENPLL2_125_NITRO_CLK
-    clk_chimp		genpll2		4	BCM_SR_GENPLL2_CHIMP_CLK
-    clk_nic_flash	genpll2		5	BCM_SR_GENPLL2_NIC_FLASH_CLK
-    clk_fs		genpll2		6	BCM_SR_GENPLL2_FS_CLK
-
-    genpll3		crystal		0	BCM_SR_GENPLL3
-    clk_hsls		genpll3		1	BCM_SR_GENPLL3_HSLS_CLK
-    clk_sdio		genpll3		2	BCM_SR_GENPLL3_SDIO_CLK
-
-    genpll4		crystal		0	BCM_SR_GENPLL4
-    clk_ccn		genpll4		1	BCM_SR_GENPLL4_CCN_CLK
-    clk_tpiu_pll	genpll4		2	BCM_SR_GENPLL4_TPIU_PLL_CLK
-    clk_noc		genpll4		3	BCM_SR_GENPLL4_NOC_CLK
-    clk_chclk_fs4	genpll4		4	BCM_SR_GENPLL4_CHCLK_FS4_CLK
-    clk_bridge_fscpu	genpll4		5	BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
-
-    genpll5		crystal		0	BCM_SR_GENPLL5
-    clk_fs4_hf		genpll5		1	BCM_SR_GENPLL5_FS4_HF_CLK
-    clk_crypto_ae	genpll5		2	BCM_SR_GENPLL5_CRYPTO_AE_CLK
-    clk_raid_ae		genpll5		3	BCM_SR_GENPLL5_RAID_AE_CLK
-
-    genpll6		crystal		0	BCM_SR_GENPLL6
-    clk_48_usb		genpll6		1	BCM_SR_GENPLL6_48_USB_CLK
-
-    lcpll0		crystal		0	BCM_SR_LCPLL0
-    clk_sata_refp 	lcpll0		1	BCM_SR_LCPLL0_SATA_REFP_CLK
-    clk_sata_refn	lcpll0		2	BCM_SR_LCPLL0_SATA_REFN_CLK
-    clk_sata_350	lcpll0		3	BCM_SR_LCPLL0_SATA_350_CLK
-    clk_sata_500	lcpll0		4	BCM_SR_LCPLL0_SATA_500_CLK
-
-    lcpll1		crystal		0	BCM_SR_LCPLL1
-    clk_wan		lcpll1		1	BCM_SR_LCPLL1_WAN_CLK
-    clk_usb_ref		lcpll1		2	BCM_SR_LCPLL1_USB_REF_CLK
-    clk_crmu_ts		lcpll1		3	BCM_SR_LCPLL1_CRMU_TS_CLK
-
-    lcpll_pcie		crystal		0	BCM_SR_LCPLL_PCIE
-    clk_pcie_phy_ref	lcpll1		1	BCM_SR_LCPLL_PCIE_PHY_REF_CLK
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
new file mode 100644
index 000000000000..5ad147d265e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
@@ -0,0 +1,417 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,iproc-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc Family Clocks
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+description: |
+  The iProc clock controller manages clocks that are common to the iProc family.
+  An SoC from the iProc family may have several PLLs, e.g., ARMPLL, GENPLL,
+  LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
+  comprises of several leaf clocks
+
+  ASIU clocks are a special case. These clocks are derived directly from the
+  reference clock of the onboard crystal.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm63138-armpll
+      - brcm,cygnus-armpll
+      - brcm,cygnus-genpll
+      - brcm,cygnus-lcpll0
+      - brcm,cygnus-mipipll
+      - brcm,cygnus-asiu-clk
+      - brcm,cygnus-audiopll
+      - brcm,hr2-armpll
+      - brcm,nsp-armpll
+      - brcm,nsp-genpll
+      - brcm,nsp-lcpll0
+      - brcm,ns2-genpll-scr
+      - brcm,ns2-genpll-sw
+      - brcm,ns2-lcpll-ddr
+      - brcm,ns2-lcpll-ports
+      - brcm,sr-genpll0
+      - brcm,sr-genpll1
+      - brcm,sr-genpll2
+      - brcm,sr-genpll3
+      - brcm,sr-genpll4
+      - brcm,sr-genpll5
+      - brcm,sr-genpll6
+      - brcm,sr-lcpll0
+      - brcm,sr-lcpll1
+      - brcm,sr-lcpll-pcie
+
+  reg:
+    minItems: 1
+    items:
+      - description: base register
+      - description: power register
+      - description: ASIU or split status register
+
+  clocks:
+    description: The input parent clock phandle for the PLL / ASIU clock. For
+      most iProc PLLs, this is an onboard crystal with a fixed rate.
+    maxItems: 1
+
+  '#clock-cells':
+    true
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 45
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,cygnus-armpll
+              - brcm,nsp-armpll
+    then:
+      properties:
+        '#clock-cells':
+          const: 0
+    else:
+      properties:
+        '#clock-cells':
+          const: 1
+      required:
+        - clock-output-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,cygnus-armpll
+              - brcm,cygnus-genpll
+              - brcm,cygnus-lcpll0
+              - brcm,cygnus-mipipll
+              - brcm,cygnus-asiu-clk
+              - brcm,cygnus-audiopll
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Cygnus.
+            These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-cygnus.h"
+
+            Clock      	Source (Parent)	Index	ID
+            -----	---------------	-----	--
+            crystal	N/A		N/A	N/A
+
+            armpll	crystal		N/A	N/A
+
+            keypad	crystal (ASIU)	0	BCM_CYGNUS_ASIU_KEYPAD_CLK
+            adc/tsc	crystal (ASIU)	1	BCM_CYGNUS_ASIU_ADC_CLK
+            pwm	crystal (ASIU)		2	BCM_CYGNUS_ASIU_PWM_CLK
+
+            genpll	crystal		0	BCM_CYGNUS_GENPLL
+            axi21	genpll		1	BCM_CYGNUS_GENPLL_AXI21_CLK
+            250mhz	genpll		2	BCM_CYGNUS_GENPLL_250MHZ_CLK
+            ihost_sys	genpll		3	BCM_CYGNUS_GENPLL_IHOST_SYS_CLK
+            enet_sw	genpll		4	BCM_CYGNUS_GENPLL_ENET_SW_CLK
+            audio_125	genpll		5	BCM_CYGNUS_GENPLL_AUDIO_125_CLK
+            can		genpll		6	BCM_CYGNUS_GENPLL_CAN_CLK
+
+            lcpll0	crystal		0	BCM_CYGNUS_LCPLL0
+            pcie_phy	lcpll0		1	BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK
+            ddr_phy	lcpll0		2	BCM_CYGNUS_LCPLL0_DDR_PHY_CLK
+            sdio	lcpll0		3	BCM_CYGNUS_LCPLL0_SDIO_CLK
+            usb_phy	lcpll0		4	BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK
+            smart_card	lcpll0		5	BCM_CYGNUS_LCPLL0_SMART_CARD_CLK
+            ch5_unused	lcpll0		6	BCM_CYGNUS_LCPLL0_CH5_UNUSED
+
+            mipipll	crystal		0	BCM_CYGNUS_MIPIPLL
+            ch0_unused	mipipll		1	BCM_CYGNUS_MIPIPLL_CH0_UNUSED
+            ch1_lcd	mipipll		2	BCM_CYGNUS_MIPIPLL_CH1_LCD
+            ch2_v3d	mipipll		3	BCM_CYGNUS_MIPIPLL_CH2_V3D
+            ch3_unused	mipipll		4	BCM_CYGNUS_MIPIPLL_CH3_UNUSED
+            ch4_unused	mipipll		5	BCM_CYGNUS_MIPIPLL_CH4_UNUSED
+            ch5_unused	mipipll		6	BCM_CYGNUS_MIPIPLL_CH5_UNUSED
+
+            audiopll	crystal		0	BCM_CYGNUS_AUDIOPLL
+            ch0_audio	audiopll	1	BCM_CYGNUS_AUDIOPLL_CH0
+            ch1_audio	audiopll	2	BCM_CYGNUS_AUDIOPLL_CH1
+            ch2_audio	audiopll	3	BCM_CYGNUS_AUDIOPLL_CH2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,hr2-armpll
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock for Hurricane 2:
+
+            Clock	Source		Index	ID
+            -----	------		-----	--
+            crystal	N/A		N/A	N/A
+
+            armpll	crystal		N/A	N/A
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,nsp-armpll
+              - brcm,nsp-genpll
+              - brcm,nsp-lcpll0
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Northstar and
+            Northstar Plus.  These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-nsp.h"
+
+            Clock	Source		Index	ID
+            -----	------		-----	--
+            crystal	N/A		N/A	N/A
+
+            armpll	crystal		N/A	N/A
+
+            genpll	crystal		0	BCM_NSP_GENPLL
+            phy		genpll		1	BCM_NSP_GENPLL_PHY_CLK
+            ethernetclk	genpll		2	BCM_NSP_GENPLL_ENET_SW_CLK
+            usbclk	genpll		3	BCM_NSP_GENPLL_USB_PHY_REF_CLK
+            iprocfast	genpll		4	BCM_NSP_GENPLL_IPROCFAST_CLK
+            sata1	genpll		5	BCM_NSP_GENPLL_SATA1_CLK
+            sata2	genpll		6	BCM_NSP_GENPLL_SATA2_CLK
+
+            lcpll0	crystal		0	BCM_NSP_LCPLL0
+            pcie_phy	lcpll0		1	BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
+            sdio	lcpll0		2	BCM_NSP_LCPLL0_SDIO_CLK
+            ddr_phy	lcpll0		3	BCM_NSP_LCPLL0_DDR_PHY_CLK
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,ns2-genpll-scr
+              - brcm,ns2-genpll-sw
+              - brcm,ns2-lcpll-ddr
+              - brcm,ns2-lcpll-ports
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Northstar 2.
+            These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-ns2.h"
+
+            Clock	Source		Index	ID
+            -----	------		-----	--
+            crystal	N/A		N/A	N/A
+
+            genpll_scr	crystal		0	BCM_NS2_GENPLL_SCR
+            scr		genpll_scr	1	BCM_NS2_GENPLL_SCR_SCR_CLK
+            fs		genpll_scr	2	BCM_NS2_GENPLL_SCR_FS_CLK
+            audio_ref	genpll_scr	3	BCM_NS2_GENPLL_SCR_AUDIO_CLK
+            ch3_unused	genpll_scr	4	BCM_NS2_GENPLL_SCR_CH3_UNUSED
+            ch4_unused	genpll_scr	5	BCM_NS2_GENPLL_SCR_CH4_UNUSED
+            ch5_unused	genpll_scr	6	BCM_NS2_GENPLL_SCR_CH5_UNUSED
+
+            genpll_sw	crystal		0	BCM_NS2_GENPLL_SW
+            rpe		genpll_sw	1	BCM_NS2_GENPLL_SW_RPE_CLK
+            250		genpll_sw	2	BCM_NS2_GENPLL_SW_250_CLK
+            nic		genpll_sw	3	BCM_NS2_GENPLL_SW_NIC_CLK
+            chimp	genpll_sw	4	BCM_NS2_GENPLL_SW_CHIMP_CLK
+            port	genpll_sw	5	BCM_NS2_GENPLL_SW_PORT_CLK
+            sdio	genpll_sw	6	BCM_NS2_GENPLL_SW_SDIO_CLK
+
+            lcpll_ddr	crystal		0	BCM_NS2_LCPLL_DDR
+            pcie_sata_usb lcpll_ddr	1	BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
+            ddr		lcpll_ddr	2	BCM_NS2_LCPLL_DDR_DDR_CLK
+            ch2_unused	lcpll_ddr	3	BCM_NS2_LCPLL_DDR_CH2_UNUSED
+            ch3_unused	lcpll_ddr	4	BCM_NS2_LCPLL_DDR_CH3_UNUSED
+            ch4_unused	lcpll_ddr	5	BCM_NS2_LCPLL_DDR_CH4_UNUSED
+            ch5_unused	lcpll_ddr	6	BCM_NS2_LCPLL_DDR_CH5_UNUSED
+
+            lcpll_ports	crystal		0	BCM_NS2_LCPLL_PORTS
+            wan		lcpll_ports	1	BCM_NS2_LCPLL_PORTS_WAN_CLK
+            rgmii	lcpll_ports	2	BCM_NS2_LCPLL_PORTS_RGMII_CLK
+            ch2_unused	lcpll_ports	3	BCM_NS2_LCPLL_PORTS_CH2_UNUSED
+            ch3_unused	lcpll_ports	4	BCM_NS2_LCPLL_PORTS_CH3_UNUSED
+            ch4_unused	lcpll_ports	5	BCM_NS2_LCPLL_PORTS_CH4_UNUSED
+            ch5_unused	lcpll_ports	6	BCM_NS2_LCPLL_PORTS_CH5_UNUSED
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,sr-genpll0
+              - brcm,sr-genpll1
+              - brcm,sr-genpll2
+              - brcm,sr-genpll3
+              - brcm,sr-genpll4
+              - brcm,sr-genpll5
+              - brcm,sr-genpll6
+              - brcm,sr-lcpll0
+              - brcm,sr-lcpll1
+              - brcm,sr-lcpll-pcie
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Stingray.
+            These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-sr.h"
+
+            Clock		Source		Index	ID
+            -----		------		-----	--
+            crystal		N/A		N/A	N/A
+            crmu_ref25m		crystal		N/A	N/A
+
+            genpll0		crystal		0	BCM_SR_GENPLL0
+            clk_125m		genpll0		1	BCM_SR_GENPLL0_125M_CLK
+            clk_scr		genpll0		2	BCM_SR_GENPLL0_SCR_CLK
+            clk_250		genpll0		3	BCM_SR_GENPLL0_250M_CLK
+            clk_pcie_axi	genpll0		4	BCM_SR_GENPLL0_PCIE_AXI_CLK
+            clk_paxc_axi_x2	genpll0		5	BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
+            clk_paxc_axi	genpll0		6	BCM_SR_GENPLL0_PAXC_AXI_CLK
+
+            genpll1		crystal		0	BCM_SR_GENPLL1
+            clk_pcie_tl		genpll1		1	BCM_SR_GENPLL1_PCIE_TL_CLK
+            clk_mhb_apb		genpll1		2	BCM_SR_GENPLL1_MHB_APB_CLK
+
+            genpll2		crystal		0	BCM_SR_GENPLL2
+            clk_nic		genpll2		1	BCM_SR_GENPLL2_NIC_CLK
+            clk_ts_500_ref	genpll2		2	BCM_SR_GENPLL2_TS_500_REF_CLK
+            clk_125_nitro	genpll2		3	BCM_SR_GENPLL2_125_NITRO_CLK
+            clk_chimp		genpll2		4	BCM_SR_GENPLL2_CHIMP_CLK
+            clk_nic_flash	genpll2		5	BCM_SR_GENPLL2_NIC_FLASH_CLK
+            clk_fs		genpll2		6	BCM_SR_GENPLL2_FS_CLK
+
+            genpll3		crystal		0	BCM_SR_GENPLL3
+            clk_hsls		genpll3		1	BCM_SR_GENPLL3_HSLS_CLK
+            clk_sdio		genpll3		2	BCM_SR_GENPLL3_SDIO_CLK
+
+            genpll4		crystal		0	BCM_SR_GENPLL4
+            clk_ccn		genpll4		1	BCM_SR_GENPLL4_CCN_CLK
+            clk_tpiu_pll	genpll4		2	BCM_SR_GENPLL4_TPIU_PLL_CLK
+            clk_noc		genpll4		3	BCM_SR_GENPLL4_NOC_CLK
+            clk_chclk_fs4	genpll4		4	BCM_SR_GENPLL4_CHCLK_FS4_CLK
+            clk_bridge_fscpu	genpll4		5	BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
+
+            genpll5		crystal		0	BCM_SR_GENPLL5
+            clk_fs4_hf		genpll5		1	BCM_SR_GENPLL5_FS4_HF_CLK
+            clk_crypto_ae	genpll5		2	BCM_SR_GENPLL5_CRYPTO_AE_CLK
+            clk_raid_ae		genpll5		3	BCM_SR_GENPLL5_RAID_AE_CLK
+
+            genpll6		crystal		0	BCM_SR_GENPLL6
+            clk_48_usb		genpll6		1	BCM_SR_GENPLL6_48_USB_CLK
+
+            lcpll0		crystal		0	BCM_SR_LCPLL0
+            clk_sata_refp 	lcpll0		1	BCM_SR_LCPLL0_SATA_REFP_CLK
+            clk_sata_refn	lcpll0		2	BCM_SR_LCPLL0_SATA_REFN_CLK
+            clk_sata_350	lcpll0		3	BCM_SR_LCPLL0_SATA_350_CLK
+            clk_sata_500	lcpll0		4	BCM_SR_LCPLL0_SATA_500_CLK
+
+            lcpll1		crystal		0	BCM_SR_LCPLL1
+            clk_wan		lcpll1		1	BCM_SR_LCPLL1_WAN_CLK
+            clk_usb_ref		lcpll1		2	BCM_SR_LCPLL1_USB_REF_CLK
+            clk_crmu_ts		lcpll1		3	BCM_SR_LCPLL1_CRMU_TS_CLK
+
+            lcpll_pcie		crystal		0	BCM_SR_LCPLL_PCIE
+            clk_pcie_phy_ref	lcpll1		1	BCM_SR_LCPLL_PCIE_PHY_REF_CLK
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,cygnus-genpll
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: genpll
+            - const: axi21
+            - const: 250mhz
+            - const: ihost_sys
+            - const: enet_sw
+            - const: audio_125
+            - const: can
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nsp-lcpll0
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: lcpll0
+            - const: pcie_phy
+            - const: sdio
+            - const: ddr_phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nsp-genpll
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: genpll
+            - const: phy
+            - const: ethernetclk
+            - const: usbclk
+            - const: iprocfast
+            - const: sata1
+            - const: sata2
+
+required:
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    osc1: oscillator {
+        #clock-cells = <0>;
+        compatible = "fixed-clock";
+        clock-frequency = <25000000>;
+    };
+
+    genpll@301d000 {
+        #clock-cells = <1>;
+        compatible = "brcm,cygnus-genpll";
+        reg = <0x301d000 0x2c>, <0x301c020 0x4>;
+        clocks = <&os1c>;
+        clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+                     "enet_sw", "audio_125", "can";
+    };
+  - |
+    osc2: oscillator {
+        #clock-cells = <0>;
+        compatible = "fixed-clock";
+        clock-frequency = <25000000>;
+    };
+
+    asiu_clks@301d048 {
+        #clock-cells = <1>;
+        compatible = "brcm,cygnus-asiu-clk";
+        reg = <0x301d048 0xc>, <0x180aa024 0x4>;
+        clocks = <&osc2>;
+        clock-output-names = "keypad", "adc/touch", "pwm";
+    };
+  - |
+    arm_clk@0 {
+        #clock-cells = <0>;
+        compatible = "brcm,nsp-armpll";
+        clocks = <&osc>;
+        reg = <0x0 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/calxeda.txt b/Documentation/devicetree/bindings/clock/calxeda.txt
deleted file mode 100644
index 0a6ac1bdcda1..000000000000
--- a/Documentation/devicetree/bindings/clock/calxeda.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Device Tree Clock bindings for Calxeda highbank platform
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"calxeda,hb-pll-clock" - for a PLL clock
-	"calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the
-		A9 clock.
-	"calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock.
-	"calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller.
-- reg : shall be the control register offset from SYSREGs base for the clock.
-- clocks : shall be the input parent clock phandle for the clock. This is
-	either an oscillator or a pll output.
-- #clock-cells : from common clock binding; shall be set to 0.
diff --git a/Documentation/devicetree/bindings/clock/calxeda.yaml b/Documentation/devicetree/bindings/clock/calxeda.yaml
new file mode 100644
index 000000000000..a34cbf3c9aaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/calxeda.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/calxeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device Tree Clock bindings for Calxeda highbank platform
+
+description: |
+  This binding covers the Calxeda SoC internal peripheral and bus clocks
+  as used by peripherals. The clocks live inside the "system register"
+  region of the SoC, so are typically presented as children of an
+  "hb-sregs" node.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - calxeda,hb-pll-clock
+      - calxeda,hb-a9periph-clock
+      - calxeda,hb-a9bus-clock
+      - calxeda,hb-emmc-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sregs@3fffc000 {
+        compatible = "calxeda,hb-sregs";
+        reg = <0x3fffc000 0x1000>;
+
+        clocks {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            osc: oscillator {
+                #clock-cells = <0>;
+                compatible = "fixed-clock";
+                clock-frequency = <33333000>;
+            };
+
+            ddrpll: ddrpll@108 {
+                #clock-cells = <0>;
+                compatible = "calxeda,hb-pll-clock";
+                clocks = <&osc>;
+                reg = <0x108>;
+            };
+
+            a9pll: a9pll@100 {
+                #clock-cells = <0>;
+                compatible = "calxeda,hb-pll-clock";
+                clocks = <&osc>;
+                reg = <0x100>;
+            };
+
+            a9periphclk: a9periphclk@104 {
+                #clock-cells = <0>;
+                compatible = "calxeda,hb-a9periph-clock";
+                clocks = <&a9pll>;
+                reg = <0x104>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
new file mode 100644
index 000000000000..998e5cce652f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/canaan,k210-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 Clock
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description: |
+  Canaan Kendryte K210 SoC clocks driver bindings. The clock
+  controller node must be defined as a child node of the K210
+  system controller node.
+
+  See also:
+  - dt-bindings/clock/k210-clk.h
+
+properties:
+  compatible:
+    const: canaan,k210-clk
+
+  clocks:
+    maxItems: 1
+    description:
+      Phandle of the SoC 26MHz fixed-rate oscillator clock.
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    clocks {
+      in0: oscillator {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <26000000>;
+      };
+    };
+
+    /* ... */
+    sysclk: clock-controller {
+      #clock-cells = <1>;
+      compatible = "canaan,k210-clk";
+      clocks = <&in0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml
new file mode 100644
index 000000000000..82836086cac1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,cs2000-cp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+description: |
+  The CS2000-CP is an extremely versatile system clocking device that
+  utilizes a programmable phase lock loop.
+
+  Link: https://www.cirrus.com/products/cs2000/
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs2000-cp
+
+  clocks:
+    description:
+      Common clock binding for CLK_IN, XTI/REF_CLK
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk_in
+      - const: ref_clk
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  cirrus,aux-output-source:
+    description:
+      Specifies the function of the auxiliary clock output pin
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # CS2000CP_AUX_OUTPUT_REF_CLK:  ref_clk input
+      - 1 # CS2000CP_AUX_OUTPUT_CLK_IN:   clk_in input
+      - 2 # CS2000CP_AUX_OUTPUT_CLK_OUT:  clk_out output
+      - 3 # CS2000CP_AUX_OUTPUT_PLL_LOCK: pll lock status
+    default: 0
+
+  cirrus,clock-skip:
+    description:
+      This mode allows the PLL to maintain lock even when CLK_IN
+      has missing pulses for up to 20 ms.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  cirrus,dynamic-mode:
+    description:
+      In dynamic mode, the CLK_IN input is used to drive the
+      digital PLL of the silicon.
+      If not given, the static mode shall be used to derive the
+      output signal directly from the REF_CLK input.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cirrus,cs2000-cp.h>
+
+    i2c@0 {
+      reg = <0x0 0x100>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-controller@4f {
+        #clock-cells = <0>;
+        compatible = "cirrus,cs2000-cp";
+        reg = <0x4f>;
+        clocks = <&rcar_sound 0>, <&x12_clk>;
+        clock-names = "clk_in", "ref_clk";
+        cirrus,aux-output-source = <CS2000CP_AUX_OUTPUT_CLK_OUT>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
deleted file mode 100644
index 52a064c789ee..000000000000
--- a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform.  Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the clock portion of
-the driver.
-
-Also see these documents for generic binding information:
-  [1] Clock : ../clock/clock-bindings.txt
-
-And these for relevant defines:
-  [2] include/dt-bindings/clock/lochnagar.h
-
-This binding must be part of the Lochnagar MFD binding:
-  [3] ../mfd/cirrus,lochnagar.txt
-
-Required properties:
-
-  - compatible : One of the following strings:
-                 "cirrus,lochnagar1-clk"
-                 "cirrus,lochnagar2-clk"
-
-  - #clock-cells : Must be 1. The first cell indicates the clock
-    number, see [2] for available clocks and [1].
-
-Optional properties:
-
-  - clocks : Must contain an entry for each clock in clock-names.
-  - clock-names : May contain entries for each of the following
-    clocks:
-     - ln-cdc-clkout : Output clock from CODEC card.
-     - ln-dsp-clkout : Output clock from DSP card.
-     - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional
-       input audio clocks from host system.
-     - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
-       external connector.
-     - ln-spdif-mclk : Optional input audio clock from SPDIF.
-     - ln-spdif-clkout : Optional input audio clock from SPDIF.
-     - ln-adat-mclk : Optional input audio clock from ADAT.
-     - ln-pmic-32k : On board fixed clock.
-     - ln-clk-12m : On board fixed clock.
-     - ln-clk-11m : On board fixed clock.
-     - ln-clk-24m : On board fixed clock.
-     - ln-clk-22m : On board fixed clock.
-     - ln-clk-8m : On board fixed clock.
-     - ln-usb-clk-24m : On board fixed clock.
-     - ln-usb-clk-12m : On board fixed clock.
-
-  - assigned-clocks : A list of Lochnagar clocks to be reparented, see
-    [2] for available clocks.
-  - assigned-clock-parents : Parents to be assigned to the clocks
-    listed in "assigned-clocks".
-
-Optional nodes:
-
-  - fixed-clock nodes may be registered for the following on board clocks:
-     - ln-pmic-32k : 32768 Hz
-     - ln-clk-12m : 12288000 Hz
-     - ln-clk-11m : 11298600 Hz
-     - ln-clk-24m : 24576000 Hz
-     - ln-clk-22m : 22579200 Hz
-     - ln-clk-8m : 8192000 Hz
-     - ln-usb-clk-24m : 24576000 Hz
-     - ln-usb-clk-12m : 12288000 Hz
-
-Example:
-
-lochnagar {
-	lochnagar-clk {
-		compatible = "cirrus,lochnagar2-clk";
-
-		#clock-cells = <1>;
-
-		clocks = <&clk-audio>, <&clk_pmic>;
-		clock-names = "ln-gf-mclk2", "ln-pmic-32k";
-
-		assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>,
-				  <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>;
-		assigned-clock-parents = <&clk-audio>,
-					 <&clk-pmic>;
-	};
-
-	clk-pmic: clk-pmic {
-		compatible = "fixed-clock";
-		clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
new file mode 100644
index 000000000000..59de125647ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of various
+  application processor systems to provide a full evaluation platform.
+  Audio system topology, clocking and power can all be controlled through
+  the Lochnagar, allowing the device under test to be used in a variety of
+  possible use cases.
+
+  This binding document describes the binding for the clock portion of the
+  driver.
+
+  Also see these documents for generic binding information:
+    [1] Clock : ../clock/clock-bindings.txt
+
+  And these for relevant defines:
+    [2] include/dt-bindings/clock/lochnagar.h
+
+  This binding must be part of the Lochnagar MFD binding:
+    [3] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar1-clk
+      - cirrus,lochnagar2-clk
+
+  '#clock-cells':
+    description:
+      The first cell indicates the clock number, see [2] for available
+      clocks and [1].
+    const: 1
+
+  clock-names:
+    items:
+      enum:
+        - ln-cdc-clkout # Output clock from CODEC card.
+        - ln-dsp-clkout # Output clock from DSP card.
+        - ln-gf-mclk1 # Optional input clock from host system.
+        - ln-gf-mclk2 # Optional input clock from host system.
+        - ln-gf-mclk3 # Optional input clock from host system.
+        - ln-gf-mclk4 # Optional input clock from host system.
+        - ln-psia1-mclk # Optional input clock from external connector.
+        - ln-psia2-mclk # Optional input clock from external connector.
+        - ln-spdif-mclk # Optional input clock from SPDIF.
+        - ln-spdif-clkout # Optional input clock from SPDIF.
+        - ln-adat-mclk # Optional input clock from ADAT.
+        - ln-pmic-32k # On board fixed clock.
+        - ln-clk-12m # On board fixed clock.
+        - ln-clk-11m # On board fixed clock.
+        - ln-clk-24m # On board fixed clock.
+        - ln-clk-22m # On board fixed clock.
+        - ln-clk-8m # On board fixed clock.
+        - ln-usb-clk-24m # On board fixed clock.
+        - ln-usb-clk-12m # On board fixed clock.
+    minItems: 1
+    maxItems: 19
+
+  clocks: true
+  assigned-clocks: true
+  assigned-clock-parents: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#clock-cells'
diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
deleted file mode 100644
index 6030afb10b5c..000000000000
--- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-* Samsung Audio Subsystem Clock Controller
-
-The Samsung Audio Subsystem clock controller generates and supplies clocks
-to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock
-binding described here is applicable to all SoCs in Exynos family.
-
-Required Properties:
-
-- compatible: should be one of the following:
-  - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
-  - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250
-    SoCs.
-  - "samsung,exynos5410-audss-clock" - controller compatible with Exynos5410
-    SoCs.
-  - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420
-    SoCs.
-- reg: physical base address and length of the controller's register set.
-
-- #clock-cells: should be 1.
-
-- clocks:
-  - pll_ref: Fixed rate PLL reference clock, parent of mout_audss. "fin_pll"
-    is used if not specified.
-  - pll_in: Input PLL to the AudioSS block, parent of mout_audss. "fout_epll"
-    is used if not specified.
-  - cdclk: External i2s clock, parent of mout_i2s. "cdclk0" is used if not
-    specified.
-  - sclk_audio: Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if
-    not specified.
-  - sclk_pcm_in: PCM clock, parent of sclk_pcm.  "sclk_pcm0" is used if not
-    specified.
-
-- clock-names: Aliases for the above clocks. They should be "pll_ref",
-  "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively.
-
-Optional Properties:
-
-  - power-domains: a phandle to respective power domain node as described by
-    generic PM domain bindings (see power/power_domain.txt for more
-    information).
-
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume. Some of the clocks are available only on a particular
-Exynos4 SoC and this is specified where applicable.
-
-Provided clocks:
-
-Clock           ID      SoC (if specific)
------------------------------------------------
-
-mout_audss      0
-mout_i2s        1
-dout_srp        2
-dout_aud_bus    3
-dout_i2s        4
-srp_clk         5
-i2s_bus         6
-sclk_i2s        7
-pcm_bus         8
-sclk_pcm        9
-adma            10      Exynos5420
-
-Example 1: An example of a clock controller node using the default input
-	   clock names is listed below.
-
-clock_audss: audss-clock-controller@3810000 {
-	compatible = "samsung,exynos5250-audss-clock";
-	reg = <0x03810000 0x0C>;
-	#clock-cells = <1>;
-};
-
-Example 2: An example of a clock controller node with the input clocks
-           specified.
-
-clock_audss: audss-clock-controller@3810000 {
-	compatible = "samsung,exynos5250-audss-clock";
-	reg = <0x03810000 0x0C>;
-	#clock-cells = <1>;
-	clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>,
-		<&ext_i2s_clk>;
-	clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk";
-};
-
-Example 3: I2S controller node that consumes the clock generated by the clock
-           controller. Refer to the standard clock bindings for information
-           about 'clocks' and 'clock-names' property.
-
-i2s0: i2s@3830000 {
-	compatible = "samsung,i2s-v5";
-	reg = <0x03830000 0x100>;
-	dmas = <&pdma0 10
-		&pdma0 9
-		&pdma0 8>;
-	dma-names = "tx", "rx", "tx-sec";
-	clocks = <&clock_audss EXYNOS_I2S_BUS>,
-		<&clock_audss EXYNOS_I2S_BUS>,
-		<&clock_audss EXYNOS_SCLK_I2S>,
-		<&clock_audss EXYNOS_MOUT_AUDSS>,
-		<&clock_audss EXYNOS_MOUT_I2S>;
-	clock-names = "iis", "i2s_opclk0", "i2s_opclk1",
-		      "mout_audss", "mout_i2s";
-};
diff --git a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt
deleted file mode 100644
index f6272dcd96f4..000000000000
--- a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Samsung Audio Subsystem Clock Controller
-
-The Samsung Audio Subsystem clock controller generates and supplies clocks
-to Audio Subsystem block available in the S5PV210 and compatible SoCs.
-
-Required Properties:
-
-- compatible: should be "samsung,s5pv210-audss-clock".
-- reg: physical base address and length of the controller's register set.
-
-- #clock-cells: should be 1.
-
-- clocks:
-  - hclk: AHB bus clock of the Audio Subsystem.
-  - xxti: Optional fixed rate PLL reference clock, parent of mout_audss. If
-    not specified (i.e. xusbxti is used for PLL reference), it is fixed to
-    a clock named "xxti".
-  - fout_epll: Input PLL to the AudioSS block, parent of mout_audss.
-  - iiscdclk0: Optional external i2s clock, parent of mout_i2s. If not
-    specified, it is fixed to a clock named "iiscdclk0".
-  - sclk_audio0: Audio bus clock, parent of mout_i2s.
-
-- clock-names: Aliases for the above clocks. They should be "hclk",
-  "xxti", "fout_epll", "iiscdclk0", and "sclk_audio0" respectively.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s5pv210-audss-clk.h header and can be used in device
-tree sources.
-
-Example: Clock controller node.
-
-	clk_audss: clock-controller@c0900000 {
-		compatible = "samsung,s5pv210-audss-clock";
-		reg = <0xc0900000 0x1000>;
-		#clock-cells = <1>;
-		clock-names = "hclk", "xxti",
-				"fout_epll", "sclk_audio0";
-		clocks = <&clocks DOUT_HCLKP>, <&xxti>,
-				<&clocks FOUT_EPLL>, <&clocks SCLK_AUDIO0>;
-	};
-
-Example: I2S controller node that consumes the clock generated by the clock
-	 controller. Refer to the standard clock bindings for information
-         about 'clocks' and 'clock-names' property.
-
-	i2s0: i2s@3830000 {
-		/* ... */
-		clock-names = "iis", "i2s_opclk0",
-				"i2s_opclk1";
-		clocks = <&clk_audss CLK_I2S>, <&clk_audss CLK_I2S>,
-				<&clk_audss CLK_DOUT_AUD_BUS>;
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index b646bbcf7f92..6fe541368889 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -1,186 +1,2 @@
-This binding is a work-in-progress, and are based on some experimental
-work by benh[1].
-
-Sources of clock signal can be represented by any node in the device
-tree.  Those nodes are designated as clock providers.  Clock consumer
-nodes use a phandle and clock specifier pair to connect clock provider
-outputs to clock inputs.  Similar to the gpio specifiers, a clock
-specifier is an array of zero, one or more cells identifying the clock
-output on a device.  The length of a clock specifier is defined by the
-value of a #clock-cells property in the clock provider node.
-
-[1] http://patchwork.ozlabs.org/patch/31551/
-
-==Clock providers==
-
-Required properties:
-#clock-cells:	   Number of cells in a clock specifier; Typically 0 for nodes
-		   with a single clock output and 1 for nodes with multiple
-		   clock outputs.
-
-Optional properties:
-clock-output-names: Recommended to be a list of strings of clock output signal
-		    names indexed by the first cell in the clock specifier.
-		    However, the meaning of clock-output-names is domain
-		    specific to the clock provider, and is only provided to
-		    encourage using the same meaning for the majority of clock
-		    providers.  This format may not work for clock providers
-		    using a complex clock specifier format.  In those cases it
-		    is recommended to omit this property and create a binding
-		    specific names property.
-
-		    Clock consumer nodes must never directly reference
-		    the provider's clock-output-names property.
-
-For example:
-
-    oscillator {
-        #clock-cells = <1>;
-        clock-output-names = "ckil", "ckih";
-    };
-
-- this node defines a device with two clock outputs, the first named
-  "ckil" and the second named "ckih".  Consumer nodes always reference
-  clocks by index. The names should reflect the clock output signal
-  names for the device.
-
-clock-indices:	   If the identifying number for the clocks in the node
-		   is not linear from zero, then this allows the mapping of
-		   identifiers into the clock-output-names array.
-
-For example, if we have two clocks <&oscillator 1> and <&oscillator 3>:
-
-	oscillator {
-		compatible = "myclocktype";
-		#clock-cells = <1>;
-		clock-indices = <1>, <3>;
-		clock-output-names = "clka", "clkb";
-	}
-
-	This ensures we do not have any empty strings in clock-output-names
-
-
-==Clock consumers==
-
-Required properties:
-clocks:		List of phandle and clock specifier pairs, one pair
-		for each clock input to the device.  Note: if the
-		clock provider specifies '0' for #clock-cells, then
-		only the phandle portion of the pair will appear.
-
-Optional properties:
-clock-names:	List of clock input name strings sorted in the same
-		order as the clocks property.  Consumers drivers
-		will use clock-names to match clock input names
-		with clocks specifiers.
-clock-ranges:	Empty property indicating that child nodes can inherit named
-		clocks from this node. Useful for bus nodes to provide a
-		clock to their children.
-
-For example:
-
-    device {
-        clocks = <&osc 1>, <&ref 0>;
-        clock-names = "baud", "register";
-    };
-
-
-This represents a device with two clock inputs, named "baud" and "register".
-The baud clock is connected to output 1 of the &osc device, and the register
-clock is connected to output 0 of the &ref.
-
-==Example==
-
-    /* external oscillator */
-    osc: oscillator {
-        compatible = "fixed-clock";
-        #clock-cells = <1>;
-        clock-frequency  = <32678>;
-        clock-output-names = "osc";
-    };
-
-    /* phase-locked-loop device, generates a higher frequency clock
-     * from the external oscillator reference */
-    pll: pll@4c000 {
-        compatible = "vendor,some-pll-interface"
-        #clock-cells = <1>;
-        clocks = <&osc 0>;
-        clock-names = "ref";
-        reg = <0x4c000 0x1000>;
-        clock-output-names = "pll", "pll-switched";
-    };
-
-    /* UART, using the low frequency oscillator for the baud clock,
-     * and the high frequency switched PLL output for register
-     * clocking */
-    uart@a000 {
-        compatible = "fsl,imx-uart";
-        reg = <0xa000 0x1000>;
-        interrupts = <33>;
-        clocks = <&osc 0>, <&pll 1>;
-        clock-names = "baud", "register";
-    };
-
-This DT fragment defines three devices: an external oscillator to provide a
-low-frequency reference clock, a PLL device to generate a higher frequency
-clock signal, and a UART.
-
-* The oscillator is fixed-frequency, and provides one clock output, named "osc".
-* The PLL is both a clock provider and a clock consumer. It uses the clock
-  signal generated by the external oscillator, and provides two output signals
-  ("pll" and "pll-switched").
-* The UART has its baud clock connected the external oscillator and its
-  register clock connected to the PLL clock (the "pll-switched" signal)
-
-==Assigned clock parents and rates==
-
-Some platforms may require initial configuration of default parent clocks
-and clock frequencies. Such a configuration can be specified in a device tree
-node through assigned-clocks, assigned-clock-parents and assigned-clock-rates
-properties. The assigned-clock-parents property should contain a list of parent
-clocks in the form of a phandle and clock specifier pair and the
-assigned-clock-rates property should contain a list of frequencies in Hz. Both
-these properties should correspond to the clocks listed in the assigned-clocks
-property.
-
-To skip setting parent or rate of a clock its corresponding entry should be
-set to 0, or can be omitted if it is not followed by any non-zero entry.
-
-    uart@a000 {
-        compatible = "fsl,imx-uart";
-        reg = <0xa000 0x1000>;
-        ...
-        clocks = <&osc 0>, <&pll 1>;
-        clock-names = "baud", "register";
-
-        assigned-clocks = <&clkcon 0>, <&pll 2>;
-        assigned-clock-parents = <&pll 2>;
-        assigned-clock-rates = <0>, <460800>;
-    };
-
-In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and
-the <&pll 2> clock is assigned a frequency value of 460800 Hz.
-
-Configuring a clock's parent and rate through the device node that consumes
-the clock can be done only for clocks that have a single user. Specifying
-conflicting parent or rate configuration in multiple consumer nodes for
-a shared clock is forbidden.
-
-Configuration of common clocks, which affect multiple consumer devices can
-be similarly specified in the clock provider node.
-
-==Protected clocks==
-
-Some platforms or firmwares may not fully expose all the clocks to the OS, such
-as in situations where those clks are used by drivers running in ARM secure
-execution levels. Such a configuration can be specified in device tree with the
-protected-clocks property in the form of a clock specifier list. This property should
-only be specified in the node that is providing the clocks being protected:
-
-   clock-controller@a000f000 {
-        compatible = "vendor,clk95;
-        reg = <0xa000f000 0x1000>
-        #clocks-cells = <1>;
-        ...
-        protected-clocks = <UART3_CLK>, <SPI5_CLK>;
-   };
+This file has moved to the clock binding schema:
+https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/clock/clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/cs2000-cp.txt b/Documentation/devicetree/bindings/clock/cs2000-cp.txt
deleted file mode 100644
index 54e6df0bee8a..000000000000
--- a/Documentation/devicetree/bindings/clock/cs2000-cp.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
-
-Required properties:
-
-- compatible:		"cirrus,cs2000-cp"
-- reg:			The chip select number on the I2C bus
-- clocks:		common clock binding for CLK_IN, XTI/REF_CLK
-- clock-names:		CLK_IN : clk_in, XTI/REF_CLK : ref_clk
-- #clock-cells:		must be <0>
-
-Example:
-
-&i2c2 {
-	...
-	cs2000: clk_multiplier@4f {
-		#clock-cells = <0>;
-		compatible = "cirrus,cs2000-cp";
-		reg = <0x4f>;
-		clocks = <&rcar_sound 0>, <&x12_clk>;
-		clock-names = "clk_in", "ref_clk";
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt b/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt
deleted file mode 100644
index 54d6d1358339..000000000000
--- a/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Clock and reset bindings for CSR atlas7
-
-Required properties:
-- compatible: Should be "sirf,atlas7-car"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- #reset-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-The ID list atlas7_clks defined in drivers/clk/sirf/clk-atlas7.c
-
-The reset consumer should specify the desired reset by having the reset
-ID in its "reset" phandle cell.
-The ID list atlas7_reset_unit defined in drivers/clk/sirf/clk-atlas7.c
-
-Examples: Clock and reset controller node:
-
-car: clock-controller@18620000 {
-	compatible = "sirf,atlas7-car";
-	reg = <0x18620000 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
-
-Examples: Consumers using clock or reset:
-
-timer@10dc0000 {
-	compatible = "sirf,macro-tick";
-	reg = <0x10dc0000 0x1000>;
-	clocks = <&car 54>;
-	interrupts = <0 0 0>,
-		   <0 1 0>,
-		   <0 2 0>,
-		   <0 49 0>,
-		   <0 50 0>,
-		   <0 51 0>;
-};
-
-uart1: uart@18020000 {
-	cell-index = <1>;
-	compatible = "sirf,macro-uart";
-	reg = <0x18020000 0x1000>;
-	clocks = <&clks 95>;
-	interrupts = <0 18 0>;
-	fifosize = <32>;
-};
-
-vpp@13110000 {
-	compatible = "sirf,prima2-vpp";
-	reg = <0x13110000 0x10000>;
-	interrupts = <0 31 0>;
-	clocks = <&car 85>;
-	resets = <&car 29>;
-};
diff --git a/Documentation/devicetree/bindings/clock/efm32-clock.txt b/Documentation/devicetree/bindings/clock/efm32-clock.txt
deleted file mode 100644
index 263d293f6a10..000000000000
--- a/Documentation/devicetree/bindings/clock/efm32-clock.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-* Clock bindings for Energy Micro efm32 Giant Gecko's Clock Management Unit
-
-Required properties:
-- compatible: Should be "efm32gg,cmu"
-- reg: Base address and length of the register set
-- interrupts: Interrupt used by the CMU
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock ID in
-its "clocks" phandle cell. The header efm32-clk.h contains a list of available
-IDs.
diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
deleted file mode 100644
index 7441ed519f02..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-* Samsung Exynos3250 Clock Controller
-
-The Exynos3250 clock controller generates and supplies clock to various
-controllers within the Exynos3250 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC.
-  - "samsung,exynos3250-cmu-dmc" - controller compatible with
-    Exynos3250 SoC for Dynamic Memory Controller domain.
-  - "samsung,exynos3250-cmu-isp" - ISP block clock controller compatible
-     with Exynos3250 SOC
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos3250.h header and can be used in device
-tree sources.
-
-Example 1: Examples of clock controller nodes are listed below.
-
-	cmu: clock-controller@10030000 {
-		compatible = "samsung,exynos3250-cmu";
-		reg = <0x10030000 0x20000>;
-		#clock-cells = <1>;
-	};
-
-	cmu_dmc: clock-controller@105c0000 {
-		compatible = "samsung,exynos3250-cmu-dmc";
-		reg = <0x105C0000 0x2000>;
-		#clock-cells = <1>;
-	};
-
-	cmu_isp: clock-controller@10048000 {
-		compatible = "samsung,exynos3250-cmu-isp";
-		reg = <0x10048000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the clock
-	   controller. Refer to the standard clock bindings for information
-	   about 'clocks' and 'clock-names' property.
-
-	serial@13800000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13800000 0x100>;
-		interrupts = <0 109 0>;
-		clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
deleted file mode 100644
index 17bb11365354..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-* Samsung Exynos4 Clock Controller
-
-The Exynos4 clock controller generates and supplies clock to various controllers
-within the Exynos4 SoC. The clock binding described here is applicable to all
-SoC's in the Exynos4 family.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
-  - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos4.h header and can be used in device
-tree sources.
-
-Example 1: An example of a clock controller node is listed below.
-
-	clock: clock-controller@10030000 {
-		compatible = "samsung,exynos4210-clock";
-		reg = <0x10030000 0x20000>;
-		#clock-cells = <1>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the clock
-	   controller. Refer to the standard clock bindings for information
-	   about 'clocks' and 'clock-names' property.
-
-	serial@13820000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13820000 0x100>;
-		interrupts = <0 54 0>;
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-Exynos4412 SoC contains some additional clocks for FIMC-ISP (Camera ISP)
-subsystem. Registers for those clocks are located in the ISP power domain.
-Because those registers are also located in a different memory region than
-the main clock controller, a separate clock controller has to be defined for
-handling them.
-
-Required Properties:
-
-- compatible: should be "samsung,exynos4412-isp-clock".
-
-- reg: physical base address of the ISP clock controller and length of memory
-  mapped region.
-
-- #clock-cells: should be 1.
-
-- clocks: list of the clock controller input clock identifiers,
-  from common clock bindings, should point to CLK_ACLK200 and
-  CLK_ACLK400_MCUISP clocks from the main clock controller.
-
-- clock-names: list of the clock controller input clock names,
-  as described in clock-bindings.txt, should be "aclk200" and
-  "aclk400_mcuisp".
-
-- power-domains: a phandle to ISP power domain node as described by
-  generic PM domain bindings.
-
-Example 3: The clock controllers bindings for Exynos4412 SoCs.
-
-	clock: clock-controller@10030000 {
-		compatible = "samsung,exynos4412-clock";
-		reg = <0x10030000 0x18000>;
-		#clock-cells = <1>;
-	};
-
-	isp_clock: clock-controller@10048000 {
-		compatible = "samsung,exynos4412-isp-clock";
-		reg = <0x10048000 0x1000>;
-		#clock-cells = <1>;
-		power-domains = <&pd_isp>;
-		clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>;
-		clock-names = "aclk200", "aclk400_mcuisp";
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
deleted file mode 100644
index aff266a12eeb..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Samsung Exynos5250 Clock Controller
-
-The Exynos5250 clock controller generates and supplies clock to various
-controllers within the Exynos5250 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5250.h header and can be used in device
-tree sources.
-
-Example 1: An example of a clock controller node is listed below.
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5250-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the clock
-	   controller. Refer to the standard clock bindings for information
-	   about 'clocks' and 'clock-names' property.
-
-	serial@13820000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13820000 0x100>;
-		interrupts = <0 54 0>;
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
deleted file mode 100644
index c79d31f7f66e..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
+++ /dev/null
@@ -1,190 +0,0 @@
-* Samsung Exynos5260 Clock Controller
-
-Exynos5260 has 13 clock controllers which are instantiated
-independently from the device-tree. These clock controllers
-generate and supply clocks to various hardware blocks within
-the SoC.
-
-Each clock is assigned an identifier and client nodes can use
-this identifier to specify the clock which they consume. All
-available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5260-clk.h header and can be used in
-device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It
-is expected that they are defined using standard clock bindings
-with following clock-output-names:
-
- - "fin_pll" - PLL input clock from XXTI
- - "xrtcxti" - input clock from XRTCXTI
- - "ioclk_pcm_extclk" - pcm external operation clock
- - "ioclk_spdif_extclk" - spdif external operation clock
- - "ioclk_i2s_cdclk" - i2s0 codec clock
-
-Phy clocks:
-
-There are several clocks which are generated by specific PHYs.
-These clocks are fed into the clock controller and then routed to
-the hardware blocks. These clocks are defined as fixed clocks in the
-driver with following names:
-
- - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
- - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
- - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
- - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
- - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
- - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
- - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
- - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
- - "phyclk_dptx_phy_clk_div2"
- - "phyclk_mipi_dphy_4l_m_rxclkesc0"
- - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
- - "phyclk_usbhost20_phy_freeclk"
- - "phyclk_usbhost20_phy_clk48mohci"
- - "phyclk_usbdrd30_udrd30_pipe_pclk"
- - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
-
-Required Properties for Clock Controller:
-
- - compatible: should be one of the following.
-	1) "samsung,exynos5260-clock-top"
-	2) "samsung,exynos5260-clock-peri"
-	3) "samsung,exynos5260-clock-egl"
-	4) "samsung,exynos5260-clock-kfc"
-	5) "samsung,exynos5260-clock-g2d"
-	6) "samsung,exynos5260-clock-mif"
-	7) "samsung,exynos5260-clock-mfc"
-	8) "samsung,exynos5260-clock-g3d"
-	9) "samsung,exynos5260-clock-fsys"
-	10) "samsung,exynos5260-clock-aud"
-	11) "samsung,exynos5260-clock-isp"
-	12) "samsung,exynos5260-clock-gscl"
-	13) "samsung,exynos5260-clock-disp"
-
- - reg: physical base address of the controller and the length of
-	memory mapped region.
-
- - #clock-cells: should be 1.
-
- - clocks: list of clock identifiers which are fed as the input to
-	the given clock controller. Please refer the next section to find
-	the input clocks for a given controller.
-
- - clock-names: list of names of clocks which are fed as the input
-	to the given clock controller.
-
-Input clocks for top clock controller:
-	- fin_pll
-	- dout_mem_pll
-	- dout_bus_pll
-	- dout_media_pll
-
-Input clocks for peri clock controller:
-	- fin_pll
-	- ioclk_pcm_extclk
-	- ioclk_i2s_cdclk
-	- ioclk_spdif_extclk
-	- phyclk_hdmi_phy_ref_cko
-	- dout_aclk_peri_66
-	- dout_sclk_peri_uart0
-	- dout_sclk_peri_uart1
-	- dout_sclk_peri_uart2
-	- dout_sclk_peri_spi0_b
-	- dout_sclk_peri_spi1_b
-	- dout_sclk_peri_spi2_b
-	- dout_aclk_peri_aud
-	- dout_sclk_peri_spi0_b
-
-Input clocks for egl clock controller:
-	- fin_pll
-	- dout_bus_pll
-
-Input clocks for kfc clock controller:
-	- fin_pll
-	- dout_media_pll
-
-Input clocks for g2d clock controller:
-	- fin_pll
-	- dout_aclk_g2d_333
-
-Input clocks for mif clock controller:
-	- fin_pll
-
-Input clocks for mfc clock controller:
-	- fin_pll
-	- dout_aclk_mfc_333
-
-Input clocks for g3d clock controller:
-	- fin_pll
-
-Input clocks for fsys clock controller:
-	- fin_pll
-	- phyclk_usbhost20_phy_phyclock
-	- phyclk_usbhost20_phy_freeclk
-	- phyclk_usbhost20_phy_clk48mohci
-	- phyclk_usbdrd30_udrd30_pipe_pclk
-	- phyclk_usbdrd30_udrd30_phyclock
-	- dout_aclk_fsys_200
-
-Input clocks for aud clock controller:
-	- fin_pll
-	- fout_aud_pll
-	- ioclk_i2s_cdclk
-	- ioclk_pcm_extclk
-
-Input clocks for isp clock controller:
-	- fin_pll
-	- dout_aclk_isp1_266
-	- dout_aclk_isp1_400
-	- mout_aclk_isp1_266
-
-Input clocks for gscl clock controller:
-	- fin_pll
-	- dout_aclk_gscl_400
-	- dout_aclk_gscl_333
-
-Input clocks for disp clock controller:
-	- fin_pll
-	- phyclk_dptx_phy_ch3_txd_clk
-	- phyclk_dptx_phy_ch2_txd_clk
-	- phyclk_dptx_phy_ch1_txd_clk
-	- phyclk_dptx_phy_ch0_txd_clk
-	- phyclk_hdmi_phy_tmds_clko
-	- phyclk_hdmi_phy_ref_clko
-	- phyclk_hdmi_phy_pixel_clko
-	- phyclk_hdmi_link_o_tmds_clkhi
-	- phyclk_mipi_dphy_4l_m_txbyte_clkhs
-	- phyclk_dptx_phy_o_ref_clk_24m
-	- phyclk_dptx_phy_clk_div2
-	- phyclk_mipi_dphy_4l_m_rxclkesc0
-	- phyclk_hdmi_phy_ref_cko
-	- ioclk_spdif_extclk
-	- dout_aclk_peri_aud
-	- dout_aclk_disp_222
-	- dout_sclk_disp_pixel
-	- dout_aclk_disp_333
-
-Example 1: An example of a clock controller node is listed below.
-
-	clock_mfc: clock-controller@11090000 {
-		compatible = "samsung,exynos5260-clock-mfc";
-		clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
-		clock-names = "fin_pll", "dout_aclk_mfc_333";
-		reg = <0x11090000 0x10000>;
-		#clock-cells = <1>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the
-		peri clock controller. Refer to the standard clock bindings for
-		information about 'clocks' and 'clock-names' property.
-
-	serial@12c00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 146 0>;
-		clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
deleted file mode 100644
index 217beb27c30e..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Samsung Exynos5410 Clock Controller
-
-The Exynos5410 clock controller generates and supplies clock to various
-controllers within the Exynos5410 SoC.
-
-Required Properties:
-
-- compatible: should be "samsung,exynos5410-clock"
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-- clocks: should contain an entry specifying the root clock from external
-  oscillator supplied through XXTI or XusbXTI pin.  This clock should be
-  defined using standard clock bindings with "fin_pll" clock-output-name.
-  That clock is being passed internally to the 9 PLLs.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5410.h header and can be used in device
-tree sources.
-
-Example 1: An example of a clock controller node is listed below.
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5410-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-		clocks = <&fin_pll>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the clock
-	   controller. Refer to the standard clock bindings for information
-	   about 'clocks' and 'clock-names' property.
-
-	serial@12c20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
deleted file mode 100644
index 717a7b1531c7..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* Samsung Exynos5420 Clock Controller
-
-The Exynos5420 clock controller generates and supplies clock to various
-controllers within the Exynos5420 SoC and for the Exynos5800 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
-  - "samsung,exynos5800-clock" - controller compatible with Exynos5800 SoC.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5420.h header and can be used in device
-tree sources.
-
-Example 1: An example of a clock controller node is listed below.
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5420-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the clock
-	   controller. Refer to the standard clock bindings for information
-	   about 'clocks' and 'clock-names' property.
-
-	serial@13820000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13820000 0x100>;
-		interrupts = <0 54 0>;
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
deleted file mode 100644
index 183c327a7d6b..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ /dev/null
@@ -1,507 +0,0 @@
-* Samsung Exynos5433 CMU (Clock Management Units)
-
-The Exynos5433 clock controller generates and supplies clock to various
-controllers within the Exynos5433 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,exynos5433-cmu-top"   - clock controller compatible for CMU_TOP
-    which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
-    domains and bus clocks.
-  - "samsung,exynos5433-cmu-cpif"  - clock controller compatible for CMU_CPIF
-    which generates clocks for LLI (Low Latency Interface) IP.
-  - "samsung,exynos5433-cmu-mif"   - clock controller compatible for CMU_MIF
-    which generates clocks for DRAM Memory Controller domain.
-  - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC
-    which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs.
-  - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS
-    which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs.
-  - "samsung,exynos5433-cmu-fsys"  - clock controller compatible for CMU_FSYS
-    which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
-  - "samsung,exynos5433-cmu-g2d"   - clock controller compatible for CMU_G2D
-    which generates clocks for G2D/MDMA IPs.
-  - "samsung,exynos5433-cmu-disp"  - clock controller compatible for CMU_DISP
-    which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs.
-  - "samsung,exynos5433-cmu-aud"   - clock controller compatible for CMU_AUD
-    which generates clocks for Cortex-A5/BUS/AUDIO clocks.
-  - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1"
-    and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS
-    which generates global data buses clock and global peripheral buses clock.
-  - "samsung,exynos5433-cmu-g3d"  - clock controller compatible for CMU_G3D
-    which generates clocks for 3D Graphics Engine IP.
-  - "samsung,exynos5433-cmu-gscl"  - clock controller compatible for CMU_GSCL
-    which generates clocks for GSCALER IPs.
-  - "samsung,exynos5433-cmu-apollo"- clock controller compatible for CMU_APOLLO
-    which generates clocks for Cortex-A53 Quad-core processor.
-  - "samsung,exynos5433-cmu-atlas" - clock controller compatible for CMU_ATLAS
-    which generates clocks for Cortex-A57 Quad-core processor, CoreSight and
-    L2 cache controller.
-  - "samsung,exynos5433-cmu-mscl" - clock controller compatible for CMU_MSCL
-    which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs.
-  - "samsung,exynos5433-cmu-mfc"  - clock controller compatible for CMU_MFC
-    which generates clocks for MFC(Multi-Format Codec) IP.
-  - "samsung,exynos5433-cmu-hevc" - clock controller compatible for CMU_HEVC
-    which generates clocks for HEVC(High Efficiency Video Codec) decoder IP.
-  - "samsung,exynos5433-cmu-isp" - clock controller compatible for CMU_ISP
-    which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs.
-  - "samsung,exynos5433-cmu-cam0" - clock controller compatible for CMU_CAM0
-    which generates clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1}
-    IPs.
-  - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1
-    which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs.
-  - "samsung,exynos5433-cmu-imem"   - clock controller compatible for CMU_IMEM
-    which generates clocks for SSS (Security SubSystem) and SlimSSS IPs.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-- clocks: list of the clock controller input clock identifiers,
-	from common clock bindings. Please refer the next section
-	to find the input clocks for a given controller.
-
-- clock-names: list of the clock controller input clock names,
-	as described in clock-bindings.txt.
-
-	Input clocks for top clock controller:
-		- oscclk
-		- sclk_mphy_pll
-		- sclk_mfc_pll
-		- sclk_bus_pll
-
-	Input clocks for cpif clock controller:
-		- oscclk
-
-	Input clocks for mif clock controller:
-		- oscclk
-		- sclk_mphy_pll
-
-	Input clocks for fsys clock controller:
-		- oscclk
-		- sclk_ufs_mphy
-		- aclk_fsys_200
-		- sclk_pcie_100_fsys
-		- sclk_ufsunipro_fsys
-		- sclk_mmc2_fsys
-		- sclk_mmc1_fsys
-		- sclk_mmc0_fsys
-		- sclk_usbhost30_fsys
-		- sclk_usbdrd30_fsys
-
-	Input clocks for g2d clock controller:
-		- oscclk
-		- aclk_g2d_266
-		- aclk_g2d_400
-
-	Input clocks for disp clock controller:
-		- oscclk
-		- sclk_dsim1_disp
-		- sclk_dsim0_disp
-		- sclk_dsd_disp
-		- sclk_decon_tv_eclk_disp
-		- sclk_decon_vclk_disp
-		- sclk_decon_eclk_disp
-		- sclk_decon_tv_vclk_disp
-		- aclk_disp_333
-
-	Input clocks for audio clock controller:
-		- oscclk
-		- fout_aud_pll
-
-	Input clocks for bus0 clock controller:
-		- aclk_bus0_400
-
-	Input clocks for bus1 clock controller:
-		- aclk_bus1_400
-
-	Input clocks for bus2 clock controller:
-		- oscclk
-		- aclk_bus2_400
-
-	Input clocks for g3d clock controller:
-		- oscclk
-		- aclk_g3d_400
-
-	Input clocks for gscl clock controller:
-		- oscclk
-		- aclk_gscl_111
-		- aclk_gscl_333
-
-	Input clocks for apollo clock controller:
-		- oscclk
-		- sclk_bus_pll_apollo
-
-	Input clocks for atlas clock controller:
-		- oscclk
-		- sclk_bus_pll_atlas
-
-	Input clocks for mscl clock controller:
-		- oscclk
-		- sclk_jpeg_mscl
-		- aclk_mscl_400
-
-	Input clocks for mfc clock controller:
-		- oscclk
-		- aclk_mfc_400
-
-	Input clocks for hevc clock controller:
-		- oscclk
-		- aclk_hevc_400
-
-	Input clocks for isp clock controller:
-		- oscclk
-		- aclk_isp_dis_400
-		- aclk_isp_400
-
-	Input clocks for cam0 clock controller:
-		- oscclk
-		- aclk_cam0_333
-		- aclk_cam0_400
-		- aclk_cam0_552
-
-	Input clocks for cam1 clock controller:
-		- oscclk
-		- sclk_isp_uart_cam1
-		- sclk_isp_spi1_cam1
-		- sclk_isp_spi0_cam1
-		- aclk_cam1_333
-		- aclk_cam1_400
-		- aclk_cam1_552
-
-	Input clocks for imem clock controller:
-		- oscclk
-		- aclk_imem_sssx_266
-		- aclk_imem_266
-		- aclk_imem_200
-
-Optional properties:
-  - power-domains: a phandle to respective power domain node as described by
-	generic PM domain bindings (see power/power_domain.txt for more
-	information).
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5433.h header and can be used in device
-tree sources.
-
-Example 1: Examples of 'oscclk' source clock node are listed below.
-
-	xxti: xxti {
-		compatible = "fixed-clock";
-		clock-output-names = "oscclk";
-		#clock-cells = <0>;
-	};
-
-Example 2: Examples of clock controller nodes are listed below.
-
-	cmu_top: clock-controller@10030000 {
-		compatible = "samsung,exynos5433-cmu-top";
-		reg = <0x10030000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_mphy_pll",
-			"sclk_mfc_pll",
-			"sclk_bus_pll";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_MPHY_PLL>,
-		       <&cmu_mif CLK_SCLK_MFC_PLL>,
-		       <&cmu_mif CLK_SCLK_BUS_PLL>;
-	};
-
-	cmu_cpif: clock-controller@10fc0000 {
-		compatible = "samsung,exynos5433-cmu-cpif";
-		reg = <0x10fc0000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk";
-		clocks = <&xxti>;
-	};
-
-	cmu_mif: clock-controller@105b0000 {
-		compatible = "samsung,exynos5433-cmu-mif";
-		reg = <0x105b0000 0x100c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_mphy_pll";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_MPHY_PLL>;
-	};
-
-	cmu_peric: clock-controller@14c80000 {
-		compatible = "samsung,exynos5433-cmu-peric";
-		reg = <0x14c80000 0x0b08>;
-		#clock-cells = <1>;
-	};
-
-	cmu_peris: clock-controller@10040000 {
-		compatible = "samsung,exynos5433-cmu-peris";
-		reg = <0x10040000 0x0b20>;
-		#clock-cells = <1>;
-	};
-
-	cmu_fsys: clock-controller@156e0000 {
-		compatible = "samsung,exynos5433-cmu-fsys";
-		reg = <0x156e0000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_ufs_mphy",
-			"aclk_fsys_200",
-			"sclk_pcie_100_fsys",
-			"sclk_ufsunipro_fsys",
-			"sclk_mmc2_fsys",
-			"sclk_mmc1_fsys",
-			"sclk_mmc0_fsys",
-			"sclk_usbhost30_fsys",
-			"sclk_usbdrd30_fsys";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_UFS_MPHY>,
-		       <&cmu_top CLK_ACLK_FSYS_200>,
-		       <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
-		       <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC2_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC1_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC0_FSYS>,
-		       <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
-		       <&cmu_top CLK_SCLK_USBDRD30_FSYS>;
-	};
-
-	cmu_g2d: clock-controller@12460000 {
-		compatible = "samsung,exynos5433-cmu-g2d";
-		reg = <0x12460000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_g2d_266",
-			"aclk_g2d_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_G2D_266>,
-		       <&cmu_top CLK_ACLK_G2D_400>;
-		power-domains = <&pd_g2d>;
-	};
-
-	cmu_disp: clock-controller@13b90000 {
-		compatible = "samsung,exynos5433-cmu-disp";
-		reg = <0x13b90000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_dsim1_disp",
-			"sclk_dsim0_disp",
-			"sclk_dsd_disp",
-			"sclk_decon_tv_eclk_disp",
-			"sclk_decon_vclk_disp",
-			"sclk_decon_eclk_disp",
-			"sclk_decon_tv_vclk_disp",
-			"aclk_disp_333";
-		clocks = <&xxti>,
-		       <&cmu_mif CLK_SCLK_DSIM1_DISP>,
-		       <&cmu_mif CLK_SCLK_DSIM0_DISP>,
-		       <&cmu_mif CLK_SCLK_DSD_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
-		       <&cmu_mif CLK_ACLK_DISP_333>;
-		power-domains = <&pd_disp>;
-	};
-
-	cmu_aud: clock-controller@114c0000 {
-		compatible = "samsung,exynos5433-cmu-aud";
-		reg = <0x114c0000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "fout_aud_pll";
-		clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>;
-		power-domains = <&pd_aud>;
-	};
-
-	cmu_bus0: clock-controller@13600000 {
-		compatible = "samsung,exynos5433-cmu-bus0";
-		reg = <0x13600000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "aclk_bus0_400";
-		clocks = <&cmu_top CLK_ACLK_BUS0_400>;
-	};
-
-	cmu_bus1: clock-controller@14800000 {
-		compatible = "samsung,exynos5433-cmu-bus1";
-		reg = <0x14800000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "aclk_bus1_400";
-		clocks = <&cmu_top CLK_ACLK_BUS1_400>;
-	};
-
-	cmu_bus2: clock-controller@13400000 {
-		compatible = "samsung,exynos5433-cmu-bus2";
-		reg = <0x13400000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_bus2_400";
-		clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
-	};
-
-	cmu_g3d: clock-controller@14aa0000 {
-		compatible = "samsung,exynos5433-cmu-g3d";
-		reg = <0x14aa0000 0x1000>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_g3d_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
-		power-domains = <&pd_g3d>;
-	};
-
-	cmu_gscl: clock-controller@13cf0000 {
-		compatible = "samsung,exynos5433-cmu-gscl";
-		reg = <0x13cf0000 0x0b10>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_gscl_111",
-			"aclk_gscl_333";
-		clocks = <&xxti>,
-			<&cmu_top CLK_ACLK_GSCL_111>,
-			<&cmu_top CLK_ACLK_GSCL_333>;
-		power-domains = <&pd_gscl>;
-	};
-
-	cmu_apollo: clock-controller@11900000 {
-		compatible = "samsung,exynos5433-cmu-apollo";
-		reg = <0x11900000 0x1088>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "sclk_bus_pll_apollo";
-		clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
-	};
-
-	cmu_atlas: clock-controller@11800000 {
-		compatible = "samsung,exynos5433-cmu-atlas";
-		reg = <0x11800000 0x1088>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "sclk_bus_pll_atlas";
-		clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
-	};
-
-	cmu_mscl: clock-controller@105d0000 {
-		compatible = "samsung,exynos5433-cmu-mscl";
-		reg = <0x105d0000 0x0b10>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_jpeg_mscl",
-			"aclk_mscl_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_SCLK_JPEG_MSCL>,
-		       <&cmu_top CLK_ACLK_MSCL_400>;
-		power-domains = <&pd_mscl>;
-	};
-
-	cmu_mfc: clock-controller@15280000 {
-		compatible = "samsung,exynos5433-cmu-mfc";
-		reg = <0x15280000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_mfc_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
-		power-domains = <&pd_mfc>;
-	};
-
-	cmu_hevc: clock-controller@14f80000 {
-		compatible = "samsung,exynos5433-cmu-hevc";
-		reg = <0x14f80000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_hevc_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
-		power-domains = <&pd_hevc>;
-	};
-
-	cmu_isp: clock-controller@146d0000 {
-		compatible = "samsung,exynos5433-cmu-isp";
-		reg = <0x146d0000 0x0b0c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_isp_dis_400",
-			"aclk_isp_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_ISP_DIS_400>,
-		       <&cmu_top CLK_ACLK_ISP_400>;
-		power-domains = <&pd_isp>;
-	};
-
-	cmu_cam0: clock-controller@120d0000 {
-		compatible = "samsung,exynos5433-cmu-cam0";
-		reg = <0x120d0000 0x0b0c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_cam0_333",
-			"aclk_cam0_400",
-			"aclk_cam0_552";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_CAM0_333>,
-		       <&cmu_top CLK_ACLK_CAM0_400>,
-		       <&cmu_top CLK_ACLK_CAM0_552>;
-		power-domains = <&pd_cam0>;
-	};
-
-	cmu_cam1: clock-controller@145d0000 {
-		compatible = "samsung,exynos5433-cmu-cam1";
-		reg = <0x145d0000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_isp_uart_cam1",
-			"sclk_isp_spi1_cam1",
-			"sclk_isp_spi0_cam1",
-			"aclk_cam1_333",
-			"aclk_cam1_400",
-			"aclk_cam1_552";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_SCLK_ISP_UART_CAM1>,
-		       <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
-		       <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
-		       <&cmu_top CLK_ACLK_CAM1_333>,
-		       <&cmu_top CLK_ACLK_CAM1_400>,
-		       <&cmu_top CLK_ACLK_CAM1_552>;
-		power-domains = <&pd_cam1>;
-	};
-
-	cmu_imem: clock-controller@11060000 {
-		compatible = "samsung,exynos5433-cmu-imem";
-		reg = <0x11060000 0x1000>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_imem_sssx_266",
-			"aclk_imem_266",
-			"aclk_imem_200";
-		clocks = <&xxti>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_266>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_200>;
-	};
-
-Example 3: UART controller node that consumes the clock generated by the clock
-	   controller.
-
-	serial_0: serial@14c10000 {
-		compatible = "samsung,exynos5433-uart";
-		reg = <0x14C10000 0x100>;
-		interrupts = <0 421 0>;
-		clocks = <&cmu_peric CLK_PCLK_UART0>,
-			 <&cmu_peric CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_bus>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
deleted file mode 100644
index 6bf1e7493f61..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos7-clock.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-* Samsung Exynos7 Clock Controller
-
-Exynos7 clock controller has various blocks which are instantiated
-independently from the device-tree. These clock controllers
-generate and supply clocks to various hardware blocks within
-the SoC.
-
-Each clock is assigned an identifier and client nodes can use
-this identifier to specify the clock which they consume. All
-available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos7-clk.h header and can be used in
-device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It
-is expected that they are defined using standard clock bindings
-with following clock-output-names:
-
- - "fin_pll" - PLL input clock from XXTI
-
-Required Properties for Clock Controller:
-
- - compatible: clock controllers will use one of the following
-	compatible strings to indicate the clock controller
-	functionality.
-
-	- "samsung,exynos7-clock-topc"
-	- "samsung,exynos7-clock-top0"
-	- "samsung,exynos7-clock-top1"
-	- "samsung,exynos7-clock-ccore"
-	- "samsung,exynos7-clock-peric0"
-	- "samsung,exynos7-clock-peric1"
-	- "samsung,exynos7-clock-peris"
-	- "samsung,exynos7-clock-fsys0"
-	- "samsung,exynos7-clock-fsys1"
-	- "samsung,exynos7-clock-mscl"
-	- "samsung,exynos7-clock-aud"
-
- - reg: physical base address of the controller and the length of
-	memory mapped region.
-
- - #clock-cells: should be 1.
-
- - clocks: list of clock identifiers which are fed as the input to
-	the given clock controller. Please refer the next section to
-	find the input clocks for a given controller.
-
-- clock-names: list of names of clocks which are fed as the input
-	to the given clock controller.
-
-Input clocks for top0 clock controller:
-	- fin_pll
-	- dout_sclk_bus0_pll
-	- dout_sclk_bus1_pll
-	- dout_sclk_cc_pll
-	- dout_sclk_mfc_pll
-	- dout_sclk_aud_pll
-
-Input clocks for top1 clock controller:
-	- fin_pll
-	- dout_sclk_bus0_pll
-	- dout_sclk_bus1_pll
-	- dout_sclk_cc_pll
-	- dout_sclk_mfc_pll
-
-Input clocks for ccore clock controller:
-	- fin_pll
-	- dout_aclk_ccore_133
-
-Input clocks for peric0 clock controller:
-	- fin_pll
-	- dout_aclk_peric0_66
-	- sclk_uart0
-
-Input clocks for peric1 clock controller:
-	- fin_pll
-	- dout_aclk_peric1_66
-	- sclk_uart1
-	- sclk_uart2
-	- sclk_uart3
-	- sclk_spi0
-	- sclk_spi1
-	- sclk_spi2
-	- sclk_spi3
-	- sclk_spi4
-	- sclk_i2s1
-	- sclk_pcm1
-	- sclk_spdif
-
-Input clocks for peris clock controller:
-	- fin_pll
-	- dout_aclk_peris_66
-
-Input clocks for fsys0 clock controller:
-	- fin_pll
-	- dout_aclk_fsys0_200
-	- dout_sclk_mmc2
-
-Input clocks for fsys1 clock controller:
-	- fin_pll
-	- dout_aclk_fsys1_200
-	- dout_sclk_mmc0
-	- dout_sclk_mmc1
-
-Input clocks for aud clock controller:
-	- fin_pll
-	- fout_aud_pll
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
index b567f8092f8c..0b02378a3a0c 100644
--- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
@@ -13,7 +13,6 @@ maintainers:
 properties:
   compatible:
     enum:
-      - allwinner,sun4i-a10-pll3-2x-clk
       - fixed-factor-clock
 
   "#clock-cells":
@@ -24,9 +23,8 @@ properties:
 
   clock-div:
     description: Fixed divider
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
 
   clock-mult:
     description: Fixed multiplier
diff --git a/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt
deleted file mode 100644
index c359367fd1a9..000000000000
--- a/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Binding for simple memory mapped io fixed-rate clock sources.
-The driver reads a clock frequency value from a single 32-bit memory mapped
-I/O register and registers it as a fixed rate clock.
-
-It was designed for test systems, like FPGA, not for complete, finished SoCs.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "fixed-mmio-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- reg : Address and length of the clock value register set.
-
-Optional properties:
-- clock-output-names : From common clock binding.
-
-Example:
-sysclock: sysclock@fd020004 {
-	#clock-cells = <0>;
-	compatible = "fixed-mmio-clock";
-	reg = <0xfd020004 0x4>;
-};
diff --git a/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml
new file mode 100644
index 000000000000..1453ac849a65
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fixed-mmio-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for simple memory mapped IO fixed-rate clock sources
+
+description:
+  This binding describes a fixed-rate clock for which the frequency can
+  be read from a single 32-bit memory mapped I/O register.
+
+  It was designed for test systems, like FPGA, not for complete,
+  finished SoCs.
+
+maintainers:
+  - Jan Kotas <jank@cadence.com>
+
+properties:
+  compatible:
+    const: fixed-mmio-clock
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    sysclock: sysclock@fd020004 {
+      compatible = "fixed-mmio-clock";
+      #clock-cells = <0>;
+      reg = <0xfd020004 0x4>;
+      clock-output-names = "sysclk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml
new file mode 100644
index 000000000000..1fa390ee7b9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,flexspi-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale FlexSPI clock driver for Layerscape SoCs
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description:
+  The Freescale Layerscape SoCs have a special FlexSPI clock which is
+  derived from the platform PLL.
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1028a-flexspi-clk
+      - fsl,lx2160a-flexspi-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    dcfg {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        fspi_clk: clock-controller@900 {
+            compatible = "fsl,ls1028a-flexspi-clk";
+            reg = <0x900 0x4>;
+            #clock-cells = <0>;
+            clocks = <&parentclk>;
+            clock-output-names = "fspi_clk";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
index c8350030b374..9ac716dfa602 100644
--- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
+++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
@@ -21,19 +21,21 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   '#clock-cells':
     const: 0
 
   fsl,vco-hz:
-     description: Optional for VCO frequency of the PLL in Hertz.
-        The VCO frequency of this PLL cannot be changed during runtime
-        only at startup. Therefore, the output frequencies are very
-        limited and might not even closely match the requested frequency.
-        To work around this restriction the user may specify its own
-        desired VCO frequency for the PLL.
-     minimum: 650000000
-     maximum: 1300000000
-     default: 1188000000
+    description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency
+      of this PLL cannot be changed during runtime only at startup. Therefore,
+      the output frequencies are very limited and might not even closely match
+      the requested frequency. To work around this restriction the user may specify
+      its own desired VCO frequency for the PLL.
+    minimum: 650000000
+    maximum: 1300000000
+    default: 1188000000
 
 required:
   - compatible
@@ -41,12 +43,14 @@ required:
   - clocks
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Display PIXEL Clock node:
   - |
     dpclk: clock-display@f1f0000 {
         compatible = "fsl,ls1028a-plldig";
-        reg = <0x0 0xf1f0000 0x0 0xffff>;
+        reg = <0xf1f0000 0xffff>;
         #clock-cells = <0>;
         clocks = <&osc_27m>;
     };
diff --git a/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
new file mode 100644
index 000000000000..f2c48460a399
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Clock bindings based on SCU Message Protocol
+
+maintainers:
+  - Abel Vesa <abel.vesa@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  This binding uses the common clock binding.
+  (Documentation/devicetree/bindings/clock/clock-bindings.txt)
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See the full list of clock IDs from
+  include/dt-bindings/clock/imx8qxp-clock.h
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8dxl-clk
+          - fsl,imx8qm-clk
+          - fsl,imx8qxp-clk
+      - const: fsl,scu-clk
+
+  '#clock-cells':
+    const: 2
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+        compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+        #clock-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
deleted file mode 100644
index d3379ff9b84b..000000000000
--- a/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Binding for simple gpio gated clock.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "gpio-gate-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- enable-gpios : GPIO reference for enabling and disabling the clock.
-
-Optional properties:
-- clocks: Maximum of one parent clock is supported.
-
-Example:
-	clock {
-		compatible = "gpio-gate-clock";
-		clocks = <&parentclk>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
new file mode 100644
index 000000000000..d09d0e3f0c6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/gpio-gate-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple GPIO clock gate
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+
+properties:
+  compatible:
+    const: gpio-gate-clock
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  enable-gpios:
+    description: GPIO reference for enabling and disabling the clock.
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    clock {
+        compatible = "gpio-gate-clock";
+        clocks = <&parentclk>;
+        #clock-cells = <0>;
+        enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt b/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt
deleted file mode 100644
index 2be1e038ca62..000000000000
--- a/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Binding for simple gpio clock multiplexer.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "gpio-mux-clock".
-- clocks: list of two references to parent clocks.
-- #clock-cells : from common clock binding; shall be set to 0.
-- select-gpios : GPIO reference for selecting the parent clock.
-
-Example:
-	clock {
-		compatible = "gpio-mux-clock";
-		clocks = <&parentclk1>, <&parentclk2>;
-		#clock-cells = <0>;
-		select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml b/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml
new file mode 100644
index 000000000000..1e21f8b3a4ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/gpio-mux-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple GPIO clock multiplexer
+
+maintainers:
+  - Sergej Sawazki <ce3a@gmx.de>
+
+properties:
+  compatible:
+    const: gpio-mux-clock
+
+  clocks:
+    items:
+      - description: First parent clock
+      - description: Second parent clock
+
+  '#clock-cells':
+    const: 0
+
+  select-gpios:
+    description: GPIO reference for selecting the parent clock.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+  - select-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    clock {
+            compatible = "gpio-mux-clock";
+            clocks = <&parentclk1>, <&parentclk2>;
+            #clock-cells = <0>;
+            select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
index ef3deb7b86ea..17ac4a3dd26a 100644
--- a/Documentation/devicetree/bindings/clock/hi6220-clock.txt
+++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
@@ -4,7 +4,7 @@ Clock control registers reside in different Hi6220 system controllers,
 please refer the following document to know more about the binding rules
 for these system controllers:
 
-Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
 
 Required Properties:
 
diff --git a/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml b/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml
new file mode 100644
index 000000000000..3ceb29cec704
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/hisilicon,hi3559av100-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon SOC Clock for HI3559AV100
+
+maintainers:
+  - Dongjiu Geng <gengdongjiu@huawei.com>
+
+description: |
+  Hisilicon SOC clock control module which supports the clocks, resets and
+  power domains on HI3559AV100.
+
+  See also:
+    dt-bindings/clock/hi3559av100-clock.h
+
+properties:
+  compatible:
+    enum:
+      - hisilicon,hi3559av100-clock
+      - hisilicon,hi3559av100-shub-clock
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 2
+    description: |
+      First cell is reset request register offset.
+      Second cell is bit offset in reset request register.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@12010000 {
+            compatible = "hisilicon,hi3559av100-clock";
+            #clock-cells = <1>;
+            #reset-cells = <2>;
+            reg = <0x0 0x12010000 0x0 0x10000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
deleted file mode 100644
index 05a245c9df08..000000000000
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-Binding for IDT VersaClock 5,6 programmable i2c clock generators.
-
-The IDT VersaClock 5 and VersaClock 6 are programmable i2c clock
-generators providing from 3 to 12 output clocks.
-
-==I2C device node==
-
-Required properties:
-- compatible:	shall be one of
-		"idt,5p49v5923"
-		"idt,5p49v5925"
-		"idt,5p49v5933"
-		"idt,5p49v5935"
-		"idt,5p49v6901"
-- reg:		i2c device address, shall be 0x68 or 0x6a.
-- #clock-cells:	from common clock binding; shall be set to 1.
-- clocks:	from common clock binding; list of parent clock handles,
-		- 5p49v5923 and
-		  5p49v5925 and
-		  5p49v6901: (required) either or both of XTAL or CLKIN
-					reference clock.
-		- 5p49v5933 and
-		- 5p49v5935: (optional) property not present (internal
-					Xtal used) or CLKIN reference
-					clock.
-- clock-names:	from common clock binding; clock input names, can be
-		- 5p49v5923 and
-		  5p49v5925 and
-		  5p49v6901: (required) either or both of "xin", "clkin".
-		- 5p49v5933 and
-		- 5p49v5935: (optional) property not present or "clkin".
-
-==Mapping between clock specifier and physical pins==
-
-When referencing the provided clock in the DT using phandle and
-clock specifier, the following mapping applies:
-
-5P49V5923:
-	0 -- OUT0_SEL_I2CB
-	1 -- OUT1
-	2 -- OUT2
-
-5P49V5933:
-	0 -- OUT0_SEL_I2CB
-	1 -- OUT1
-	2 -- OUT4
-
-5P49V5925 and
-5P49V5935:
-	0 -- OUT0_SEL_I2CB
-	1 -- OUT1
-	2 -- OUT2
-	3 -- OUT3
-	4 -- OUT4
-
-5P49V6901:
-	0 -- OUT0_SEL_I2CB
-	1 -- OUT1
-	2 -- OUT2
-	3 -- OUT3
-	4 -- OUT4
-
-==Example==
-
-/* 25MHz reference crystal */
-ref25: ref25m {
-	compatible = "fixed-clock";
-	#clock-cells = <0>;
-	clock-frequency = <25000000>;
-};
-
-i2c-master-node {
-
-	/* IDT 5P49V5923 i2c clock generator */
-	vc5: clock-generator@6a {
-		compatible = "idt,5p49v5923";
-		reg = <0x6a>;
-		#clock-cells = <1>;
-
-		/* Connect XIN input to 25MHz reference */
-		clocks = <&ref25m>;
-		clock-names = "xin";
-	};
-};
-
-/* Consumer referencing the 5P49V5923 pin OUT1 */
-consumer {
-	...
-	clocks = <&vc5 1>;
-	...
-}
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
new file mode 100644
index 000000000000..f9ba9864d8b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/idt,versaclock5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for IDT VersaClock 5 and 6 programmable I2C clock generators
+
+description: |
+  The IDT VersaClock 5 and VersaClock 6 are programmable I2C
+  clock generators providing from 3 to 12 output clocks.
+
+  When referencing the provided clock in the DT using phandle and clock
+  specifier, the following mapping applies:
+
+  - 5P49V5923:
+    0 -- OUT0_SEL_I2CB
+    1 -- OUT1
+    2 -- OUT2
+
+  - 5P49V5933:
+    0 -- OUT0_SEL_I2CB
+    1 -- OUT1
+    2 -- OUT4
+
+  - other parts:
+    0 -- OUT0_SEL_I2CB
+    1 -- OUT1
+    2 -- OUT2
+    3 -- OUT3
+    4 -- OUT4
+
+  The idt,shutdown and idt,output-enable-active properties control the
+  SH (en_global_shutdown) and SP bits of the Primary Source and Shutdown
+  Register, respectively. Their behavior is summarized by the following
+  table:
+
+  SH SP Output when the SD/OE pin is Low/High
+  == == =====================================
+   0  0 Active/Inactive
+   0  1 Inactive/Active
+   1  0 Active/Shutdown
+   1  1 Inactive/Shutdown
+
+  The case where SH and SP are both 1 is likely not very interesting.
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - idt,5p49v5923
+      - idt,5p49v5925
+      - idt,5p49v5933
+      - idt,5p49v5935
+      - idt,5p49v6901
+      - idt,5p49v6965
+      - idt,5p49v6975
+
+  reg:
+    description: I2C device address
+    enum: [ 0x68, 0x6a ]
+
+  '#clock-cells':
+    const: 1
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum: [ xin, clkin ]
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  idt,xtal-load-femtofarads:
+    minimum: 9000
+    maximum: 22760
+    description: Optional load capacitor for XTAL1 and XTAL2
+
+  idt,shutdown:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      If 1, this enables the shutdown functionality: the chip will be
+      shut down if the SD/OE pin is driven high. If 0, this disables the
+      shutdown functionality: the chip will never be shut down based on
+      the value of the SD/OE pin. This property corresponds to the SH
+      bit of the Primary Source and Shutdown Register.
+
+  idt,output-enable-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      If 1, this enables output when the SD/OE pin is high, and disables
+      output when the SD/OE pin is low. If 0, this disables output when
+      the SD/OE pin is high, and enables output when the SD/OE pin is
+      low. This corresponds to the SP bit of the Primary Source and
+      Shutdown Register.
+
+patternProperties:
+  "^OUT[1-4]$":
+    type: object
+    description:
+      Description of one of the outputs (OUT1..OUT4). See "Clock1 Output
+      Configuration" in the Versaclock 5/6/6E Family Register Description
+      and Programming Guide.
+    properties:
+      idt,mode:
+        description:
+          The output drive mode. Values defined in dt-bindings/clock/versaclock.h
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 6
+      idt,voltage-microvolt:
+        description: The output drive voltage.
+        enum: [ 1800000, 2500000, 3300000 ]
+      idt,slew-percent:
+        description: The Slew rate control for CMOS single-ended.
+        enum: [ 80, 85, 90, 100 ]
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - idt,shutdown
+  - idt,output-enable-active
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - idt,5p49v5933
+            - idt,5p49v5935
+            - idt,5p49v6975
+    then:
+      # Devices with builtin crystal + optional external input
+      properties:
+        clock-names:
+          const: clkin
+        clocks:
+          maxItems: 1
+    else:
+      # Devices without builtin crystal
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/versaclock.h>
+
+    /* 25MHz reference crystal */
+    ref25: ref25m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* IDT 5P49V5923 I2C clock generator */
+        vc5: clock-generator@6a {
+            compatible = "idt,5p49v5923";
+            reg = <0x6a>;
+            #clock-cells = <1>;
+
+            /* Connect XIN input to 25MHz reference */
+            clocks = <&ref25m>;
+            clock-names = "xin";
+
+            /* Set the SD/OE pin's settings */
+            idt,shutdown = <0>;
+            idt,output-enable-active = <0>;
+
+            OUT1 {
+                idt,mode = <VC5_CMOSD>;
+                idt,voltage-microvolt = <1800000>;
+                idt,slew-percent = <80>;
+            };
+
+            OUT4 {
+                idt,mode = <VC5_LVDS>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt
deleted file mode 100644
index 9823baf7acb6..000000000000
--- a/Documentation/devicetree/bindings/clock/imx1-clock.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Clock bindings for Freescale i.MX1 CPUs
-
-Required properties:
-- compatible: Should be "fsl,imx1-ccm".
-- reg: Address and length of the register set.
-- #clock-cells: Should be <1>.
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
-for the full list of i.MX1 clock IDs.
-
-Examples:
-	clks: ccm@21b000 {
-		#clock-cells = <1>;
-		compatible = "fsl,imx1-ccm";
-		reg = <0x0021b000 0x1000>;
-	};
-
-	pwm: pwm@208000 {
-		#pwm-cells = <2>;
-		compatible = "fsl,imx1-pwm";
-		reg = <0x00208000 0x1000>;
-		interrupts = <34>;
-		clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
-		clock-names = "ipg", "per";
-	};
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
new file mode 100644
index 000000000000..56f524780b1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx1-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX1 CPUs
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+  for the full list of i.MX1 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx1-ccm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx1-clock.h>
+
+    clock-controller@21b000 {
+        #clock-cells = <1>;
+        compatible = "fsl,imx1-ccm";
+        reg = <0x0021b000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.txt b/Documentation/devicetree/bindings/clock/imx21-clock.txt
deleted file mode 100644
index 806f63d628bd..000000000000
--- a/Documentation/devicetree/bindings/clock/imx21-clock.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Clock bindings for Freescale i.MX21
-
-Required properties:
-- compatible  : Should be "fsl,imx21-ccm".
-- reg         : Address and length of the register set.
-- interrupts  : Should contain CCM interrupt.
-- #clock-cells: Should be <1>.
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
-for the full list of i.MX21 clock IDs.
-
-Examples:
-	clks: ccm@10027000{
-		compatible = "fsl,imx21-ccm";
-		reg = <0x10027000 0x800>;
-		#clock-cells = <1>;
-	};
-
-	uart1: serial@1000a000 {
-		compatible = "fsl,imx21-uart";
-		reg = <0x1000a000 0x1000>;
-		interrupts = <20>;
-		clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
-			 <&clks IMX21_CLK_PER1>;
-		clock-names = "ipg", "per";
-	};
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
new file mode 100644
index 000000000000..e2d50544700a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx21-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX21
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+  for the full list of i.MX21 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx21-ccm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx21-clock.h>
+
+    clock-controller@10027000 {
+        compatible = "fsl,imx21-ccm";
+        reg = <0x10027000 0x800>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt
deleted file mode 100644
index 8385348d3bd9..000000000000
--- a/Documentation/devicetree/bindings/clock/imx23-clock.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Clock bindings for Freescale i.MX23
-
-Required properties:
-- compatible: Should be "fsl,imx23-clkctrl"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX23
-clocks and IDs.
-
-	Clock		ID
-	------------------
-	ref_xtal	0
-	pll		1
-	ref_cpu		2
-	ref_emi		3
-	ref_pix		4
-	ref_io		5
-	saif_sel	6
-	lcdif_sel	7
-	gpmi_sel	8
-	ssp_sel		9
-	emi_sel		10
-	cpu		11
-	etm_sel		12
-	cpu_pll		13
-	cpu_xtal	14
-	hbus		15
-	xbus		16
-	lcdif_div	17
-	ssp_div		18
-	gpmi_div	19
-	emi_pll		20
-	emi_xtal	21
-	etm_div		22
-	saif_div	23
-	clk32k_div	24
-	rtc		25
-	adc		26
-	spdif_div	27
-	clk32k		28
-	dri		29
-	pwm		30
-	filt		31
-	uart		32
-	ssp		33
-	gpmi		34
-	spdif		35
-	emi		36
-	saif		37
-	lcdif		38
-	etm		39
-	usb		40
-	usb_phy		41
-
-Examples:
-
-clks: clkctrl@80040000 {
-	compatible = "fsl,imx23-clkctrl";
-	reg = <0x80040000 0x2000>;
-	#clock-cells = <1>;
-};
-
-auart0: serial@8006c000 {
-	compatible = "fsl,imx23-auart";
-	reg = <0x8006c000 0x2000>;
-	interrupts = <24 25 23>;
-	clocks = <&clks 32>;
-};
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
new file mode 100644
index 000000000000..7e890ab9c77d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx23-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX23
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX23
+  clocks and IDs.
+
+        Clock		ID
+        ------------------
+        ref_xtal	0
+        pll		1
+        ref_cpu		2
+        ref_emi		3
+        ref_pix		4
+        ref_io		5
+        saif_sel	6
+        lcdif_sel	7
+        gpmi_sel	8
+        ssp_sel		9
+        emi_sel		10
+        cpu		11
+        etm_sel		12
+        cpu_pll		13
+        cpu_xtal	14
+        hbus		15
+        xbus		16
+        lcdif_div	17
+        ssp_div		18
+        gpmi_div	19
+        emi_pll		20
+        emi_xtal	21
+        etm_div		22
+        saif_div	23
+        clk32k_div	24
+        rtc		25
+        adc		26
+        spdif_div	27
+        clk32k		28
+        dri		29
+        pwm		30
+        filt		31
+        uart		32
+        ssp		33
+        gpmi		34
+        spdif		35
+        emi		36
+        saif		37
+        lcdif		38
+        etm		39
+        usb		40
+        usb_phy		41
+
+properties:
+  compatible:
+    const: fsl,imx23-clkctrl
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@80040000 {
+        compatible = "fsl,imx23-clkctrl";
+        reg = <0x80040000 0x2000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt
deleted file mode 100644
index f8135ea9ca4e..000000000000
--- a/Documentation/devicetree/bindings/clock/imx25-clock.txt
+++ /dev/null
@@ -1,160 +0,0 @@
-* Clock bindings for Freescale i.MX25
-
-Required properties:
-- compatible: Should be "fsl,imx25-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX25
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	dummy			0
-	osc			1
-	mpll			2
-	upll			3
-	mpll_cpu_3_4		4
-	cpu_sel			5
-	cpu			6
-	ahb			7
-	usb_div			8
-	ipg			9
-	per0_sel		10
-	per1_sel		11
-	per2_sel		12
-	per3_sel		13
-	per4_sel		14
-	per5_sel		15
-	per6_sel		16
-	per7_sel		17
-	per8_sel		18
-	per9_sel		19
-	per10_sel		20
-	per11_sel		21
-	per12_sel		22
-	per13_sel		23
-	per14_sel		24
-	per15_sel		25
-	per0			26
-	per1			27
-	per2			28
-	per3			29
-	per4			30
-	per5			31
-	per6			32
-	per7			33
-	per8			34
-	per9			35
-	per10			36
-	per11			37
-	per12			38
-	per13			39
-	per14			40
-	per15			41
-	csi_ipg_per		42
-	epit_ipg_per		43
-	esai_ipg_per		44
-	esdhc1_ipg_per		45
-	esdhc2_ipg_per		46
-	gpt_ipg_per		47
-	i2c_ipg_per		48
-	lcdc_ipg_per		49
-	nfc_ipg_per		50
-	owire_ipg_per		51
-	pwm_ipg_per		52
-	sim1_ipg_per		53
-	sim2_ipg_per		54
-	ssi1_ipg_per		55
-	ssi2_ipg_per		56
-	uart_ipg_per		57
-	ata_ahb			58
-	reserved		59
-	csi_ahb			60
-	emi_ahb			61
-	esai_ahb		62
-	esdhc1_ahb		63
-	esdhc2_ahb		64
-	fec_ahb			65
-	lcdc_ahb		66
-	rtic_ahb		67
-	sdma_ahb		68
-	slcdc_ahb		69
-	usbotg_ahb		70
-	reserved		71
-	reserved		72
-	reserved		73
-	reserved		74
-	can1_ipg		75
-	can2_ipg		76
-	csi_ipg			77
-	cspi1_ipg		78
-	cspi2_ipg		79
-	cspi3_ipg		80
-	dryice_ipg		81
-	ect_ipg			82
-	epit1_ipg		83
-	epit2_ipg		84
-	reserved		85
-	esdhc1_ipg		86
-	esdhc2_ipg		87
-	fec_ipg			88
-	reserved		89
-	reserved		90
-	reserved		91
-	gpt1_ipg		92
-	gpt2_ipg		93
-	gpt3_ipg		94
-	gpt4_ipg		95
-	reserved		96
-	reserved		97
-	reserved		98
-	iim_ipg			99
-	reserved		100
-	reserved		101
-	kpp_ipg			102
-	lcdc_ipg		103
-	reserved		104
-	pwm1_ipg		105
-	pwm2_ipg		106
-	pwm3_ipg		107
-	pwm4_ipg		108
-	rngb_ipg		109
-	reserved		110
-	scc_ipg			111
-	sdma_ipg		112
-	sim1_ipg		113
-	sim2_ipg		114
-	slcdc_ipg		115
-	spba_ipg		116
-	ssi1_ipg		117
-	ssi2_ipg		118
-	tsc_ipg			119
-	uart1_ipg		120
-	uart2_ipg		121
-	uart3_ipg		122
-	uart4_ipg		123
-	uart5_ipg		124
-	reserved		125
-	wdt_ipg			126
-	cko_div			127
-	cko_sel			128
-	cko			129
-
-Examples:
-
-clks: ccm@53f80000 {
-	compatible = "fsl,imx25-ccm";
-	reg = <0x53f80000 0x4000>;
-	interrupts = <31>;
-};
-
-uart1: serial@43f90000 {
-	compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-	reg = <0x43f90000 0x4000>;
-	interrupts = <45>;
-	clocks = <&clks 79>, <&clks 50>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
new file mode 100644
index 000000000000..1792e138984b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx25-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX25
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX25
+  clocks and IDs.
+
+        Clock			ID
+        --------------------------
+        dummy			0
+        osc			1
+        mpll			2
+        upll			3
+        mpll_cpu_3_4		4
+        cpu_sel			5
+        cpu			6
+        ahb			7
+        usb_div			8
+        ipg			9
+        per0_sel		10
+        per1_sel		11
+        per2_sel		12
+        per3_sel		13
+        per4_sel		14
+        per5_sel		15
+        per6_sel		16
+        per7_sel		17
+        per8_sel		18
+        per9_sel		19
+        per10_sel		20
+        per11_sel		21
+        per12_sel		22
+        per13_sel		23
+        per14_sel		24
+        per15_sel		25
+        per0			26
+        per1			27
+        per2			28
+        per3			29
+        per4			30
+        per5			31
+        per6			32
+        per7			33
+        per8			34
+        per9			35
+        per10			36
+        per11			37
+        per12			38
+        per13			39
+        per14			40
+        per15			41
+        csi_ipg_per		42
+        epit_ipg_per		43
+        esai_ipg_per		44
+        esdhc1_ipg_per		45
+        esdhc2_ipg_per		46
+        gpt_ipg_per		47
+        i2c_ipg_per		48
+        lcdc_ipg_per		49
+        nfc_ipg_per		50
+        owire_ipg_per		51
+        pwm_ipg_per		52
+        sim1_ipg_per		53
+        sim2_ipg_per		54
+        ssi1_ipg_per		55
+        ssi2_ipg_per		56
+        uart_ipg_per		57
+        ata_ahb			58
+        reserved		59
+        csi_ahb			60
+        emi_ahb			61
+        esai_ahb		62
+        esdhc1_ahb		63
+        esdhc2_ahb		64
+        fec_ahb			65
+        lcdc_ahb		66
+        rtic_ahb		67
+        sdma_ahb		68
+        slcdc_ahb		69
+        usbotg_ahb		70
+        reserved		71
+        reserved		72
+        reserved		73
+        reserved		74
+        can1_ipg		75
+        can2_ipg		76
+        csi_ipg			77
+        cspi1_ipg		78
+        cspi2_ipg		79
+        cspi3_ipg		80
+        dryice_ipg		81
+        ect_ipg			82
+        epit1_ipg		83
+        epit2_ipg		84
+        reserved		85
+        esdhc1_ipg		86
+        esdhc2_ipg		87
+        fec_ipg			88
+        reserved		89
+        reserved		90
+        reserved		91
+        gpt1_ipg		92
+        gpt2_ipg		93
+        gpt3_ipg		94
+        gpt4_ipg		95
+        reserved		96
+        reserved		97
+        reserved		98
+        iim_ipg			99
+        reserved		100
+        reserved		101
+        kpp_ipg			102
+        lcdc_ipg		103
+        reserved		104
+        pwm1_ipg		105
+        pwm2_ipg		106
+        pwm3_ipg		107
+        pwm4_ipg		108
+        rngb_ipg		109
+        reserved		110
+        scc_ipg			111
+        sdma_ipg		112
+        sim1_ipg		113
+        sim2_ipg		114
+        slcdc_ipg		115
+        spba_ipg		116
+        ssi1_ipg		117
+        ssi2_ipg		118
+        tsc_ipg			119
+        uart1_ipg		120
+        uart2_ipg		121
+        uart3_ipg		122
+        uart4_ipg		123
+        uart5_ipg		124
+        reserved		125
+        wdt_ipg			126
+        cko_div			127
+        cko_sel			128
+        cko			129
+
+properties:
+  compatible:
+    const: fsl,imx25-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx25-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt
deleted file mode 100644
index 4c95c048d3b2..000000000000
--- a/Documentation/devicetree/bindings/clock/imx27-clock.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Clock bindings for Freescale i.MX27
-
-Required properties:
-- compatible: Should be "fsl,imx27-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
-for the full list of i.MX27 clock IDs.
-
-Examples:
-	clks: ccm@10027000{
-		compatible = "fsl,imx27-ccm";
-		reg = <0x10027000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	uart1: serial@1000a000 {
-		compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-		reg = <0x1000a000 0x1000>;
-		interrupts = <20>;
-		clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
-			 <&clks IMX27_CLK_PER1_GATE>;
-		clock-names = "ipg", "per";
-	};
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
new file mode 100644
index 000000000000..99925aa22a4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx27-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX27
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+  for the full list of i.MX27 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx27-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx27-clock.h>
+
+    clock-controller@10027000 {
+        compatible = "fsl,imx27-ccm";
+        reg = <0x10027000 0x1000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt
deleted file mode 100644
index d84a37d2885f..000000000000
--- a/Documentation/devicetree/bindings/clock/imx28-clock.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-* Clock bindings for Freescale i.MX28
-
-Required properties:
-- compatible: Should be "fsl,imx28-clkctrl"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX28
-clocks and IDs.
-
-	Clock		ID
-	------------------
-	ref_xtal	0
-	pll0		1
-	pll1		2
-	pll2		3
-	ref_cpu		4
-	ref_emi		5
-	ref_io0		6
-	ref_io1		7
-	ref_pix		8
-	ref_hsadc	9
-	ref_gpmi	10
-	saif0_sel	11
-	saif1_sel	12
-	gpmi_sel	13
-	ssp0_sel	14
-	ssp1_sel	15
-	ssp2_sel	16
-	ssp3_sel	17
-	emi_sel		18
-	etm_sel		19
-	lcdif_sel	20
-	cpu		21
-	ptp_sel		22
-	cpu_pll		23
-	cpu_xtal	24
-	hbus		25
-	xbus		26
-	ssp0_div	27
-	ssp1_div	28
-	ssp2_div	29
-	ssp3_div	30
-	gpmi_div	31
-	emi_pll		32
-	emi_xtal	33
-	lcdif_div	34
-	etm_div		35
-	ptp		36
-	saif0_div	37
-	saif1_div	38
-	clk32k_div	39
-	rtc		40
-	lradc		41
-	spdif_div	42
-	clk32k		43
-	pwm		44
-	uart		45
-	ssp0		46
-	ssp1		47
-	ssp2		48
-	ssp3		49
-	gpmi		50
-	spdif		51
-	emi		52
-	saif0		53
-	saif1		54
-	lcdif		55
-	etm		56
-	fec		57
-	can0		58
-	can1		59
-	usb0		60
-	usb1		61
-	usb0_phy	62
-	usb1_phy	63
-	enet_out	64
-
-Examples:
-
-clks: clkctrl@80040000 {
-	compatible = "fsl,imx28-clkctrl";
-	reg = <0x80040000 0x2000>;
-	#clock-cells = <1>;
-};
-
-auart0: serial@8006a000 {
-	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-	reg = <0x8006a000 0x2000>;
-	interrupts = <112 70 71>;
-	clocks = <&clks 45>;
-};
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
new file mode 100644
index 000000000000..a542d680b1ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx28-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX28
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX28
+  clocks and IDs.
+
+        Clock		ID
+        ------------------
+        ref_xtal	0
+        pll0		1
+        pll1		2
+        pll2		3
+        ref_cpu		4
+        ref_emi		5
+        ref_io0		6
+        ref_io1		7
+        ref_pix		8
+        ref_hsadc	9
+        ref_gpmi	10
+        saif0_sel	11
+        saif1_sel	12
+        gpmi_sel	13
+        ssp0_sel	14
+        ssp1_sel	15
+        ssp2_sel	16
+        ssp3_sel	17
+        emi_sel		18
+        etm_sel		19
+        lcdif_sel	20
+        cpu		21
+        ptp_sel		22
+        cpu_pll		23
+        cpu_xtal	24
+        hbus		25
+        xbus		26
+        ssp0_div	27
+        ssp1_div	28
+        ssp2_div	29
+        ssp3_div	30
+        gpmi_div	31
+        emi_pll		32
+        emi_xtal	33
+        lcdif_div	34
+        etm_div		35
+        ptp		36
+        saif0_div	37
+        saif1_div	38
+        clk32k_div	39
+        rtc		40
+        lradc		41
+        spdif_div	42
+        clk32k		43
+        pwm		44
+        uart		45
+        ssp0		46
+        ssp1		47
+        ssp2		48
+        ssp3		49
+        gpmi		50
+        spdif		51
+        emi		52
+        saif0		53
+        saif1		54
+        lcdif		55
+        etm		56
+        fec		57
+        can0		58
+        can1		59
+        usb0		60
+        usb1		61
+        usb0_phy	62
+        usb1_phy	63
+        enet_out	64
+
+properties:
+  compatible:
+    const: fsl,imx28-clkctrl
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@80040000 {
+        compatible = "fsl,imx28-clkctrl";
+        reg = <0x80040000 0x2000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt
deleted file mode 100644
index 0a291090e562..000000000000
--- a/Documentation/devicetree/bindings/clock/imx31-clock.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-* Clock bindings for Freescale i.MX31
-
-Required properties:
-- compatible: Should be "fsl,imx31-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX31
-clocks and IDs.
-
-	Clock		    ID
-	-----------------------
-	dummy	             0
-	ckih                 1
-	ckil                 2
-	mpll                 3
-	spll                 4
-	upll                 5
-	mcu_main             6
-	hsp                  7
-	ahb                  8
-	nfc                  9
-	ipg                  10
-	per_div              11
-	per                  12
-	csi_sel              13
-	fir_sel              14
-	csi_div              15
-	usb_div_pre          16
-	usb_div_post         17
-	fir_div_pre          18
-	fir_div_post         19
-	sdhc1_gate           20
-	sdhc2_gate           21
-	gpt_gate             22
-	epit1_gate           23
-	epit2_gate           24
-	iim_gate             25
-	ata_gate             26
-	sdma_gate            27
-	cspi3_gate           28
-	rng_gate             29
-	uart1_gate           30
-	uart2_gate           31
-	ssi1_gate            32
-	i2c1_gate            33
-	i2c2_gate            34
-	i2c3_gate            35
-	hantro_gate          36
-	mstick1_gate         37
-	mstick2_gate         38
-	csi_gate             39
-	rtc_gate             40
-	wdog_gate            41
-	pwm_gate             42
-	sim_gate             43
-	ect_gate             44
-	usb_gate             45
-	kpp_gate             46
-	ipu_gate             47
-	uart3_gate           48
-	uart4_gate           49
-	uart5_gate           50
-	owire_gate           51
-	ssi2_gate            52
-	cspi1_gate           53
-	cspi2_gate           54
-	gacc_gate            55
-	emi_gate             56
-	rtic_gate            57
-	firi_gate            58
-
-Examples:
-
-clks: ccm@53f80000{
-	compatible = "fsl,imx31-ccm";
-	reg = <0x53f80000 0x4000>;
-	interrupts = <31>, <53>;
-	#clock-cells = <1>;
-};
-
-uart1: serial@43f90000 {
-	compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-	reg = <0x43f90000 0x4000>;
-	interrupts = <45>;
-	clocks = <&clks 10>, <&clks 30>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
new file mode 100644
index 000000000000..168c8ada5e81
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx31-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX31
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX31
+  clocks and IDs.
+
+        Clock		    ID
+        -----------------------
+        dummy	             0
+        ckih                 1
+        ckil                 2
+        mpll                 3
+        spll                 4
+        upll                 5
+        mcu_main             6
+        hsp                  7
+        ahb                  8
+        nfc                  9
+        ipg                  10
+        per_div              11
+        per                  12
+        csi_sel              13
+        fir_sel              14
+        csi_div              15
+        usb_div_pre          16
+        usb_div_post         17
+        fir_div_pre          18
+        fir_div_post         19
+        sdhc1_gate           20
+        sdhc2_gate           21
+        gpt_gate             22
+        epit1_gate           23
+        epit2_gate           24
+        iim_gate             25
+        ata_gate             26
+        sdma_gate            27
+        cspi3_gate           28
+        rng_gate             29
+        uart1_gate           30
+        uart2_gate           31
+        ssi1_gate            32
+        i2c1_gate            33
+        i2c2_gate            34
+        i2c3_gate            35
+        hantro_gate          36
+        mstick1_gate         37
+        mstick2_gate         38
+        csi_gate             39
+        rtc_gate             40
+        wdog_gate            41
+        pwm_gate             42
+        sim_gate             43
+        ect_gate             44
+        usb_gate             45
+        kpp_gate             46
+        ipu_gate             47
+        uart3_gate           48
+        uart4_gate           49
+        uart5_gate           50
+        owire_gate           51
+        ssi2_gate            52
+        cspi1_gate           53
+        cspi2_gate           54
+        gacc_gate            55
+        emi_gate             56
+        rtic_gate            57
+        firi_gate            58
+
+properties:
+  compatible:
+    const: fsl,imx31-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for DVFS when a frequency change is requested, request 2 is
+      to generate interrupt for DPTC when a voltage change is requested.
+    items:
+      - description: CCM DVFS interrupt request 1
+      - description: CCM DPTC interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx31-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>, <53>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt
deleted file mode 100644
index f49783213c56..000000000000
--- a/Documentation/devicetree/bindings/clock/imx35-clock.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-* Clock bindings for Freescale i.MX35
-
-Required properties:
-- compatible: Should be "fsl,imx35-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX35
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	ckih			0
-	mpll			1
-	ppll			2
-	mpll_075		3
-	arm			4
-	hsp			5
-	hsp_div			6
-	hsp_sel			7
-	ahb			8
-	ipg			9
-	arm_per_div		10
-	ahb_per_div		11
-	ipg_per			12
-	uart_sel		13
-	uart_div		14
-	esdhc_sel		15
-	esdhc1_div		16
-	esdhc2_div		17
-	esdhc3_div		18
-	spdif_sel		19
-	spdif_div_pre		20
-	spdif_div_post		21
-	ssi_sel			22
-	ssi1_div_pre		23
-	ssi1_div_post		24
-	ssi2_div_pre		25
-	ssi2_div_post		26
-	usb_sel			27
-	usb_div			28
-	nfc_div			29
-	asrc_gate		30
-	pata_gate		31
-	audmux_gate		32
-	can1_gate		33
-	can2_gate		34
-	cspi1_gate		35
-	cspi2_gate		36
-	ect_gate		37
-	edio_gate		38
-	emi_gate		39
-	epit1_gate		40
-	epit2_gate		41
-	esai_gate		42
-	esdhc1_gate		43
-	esdhc2_gate		44
-	esdhc3_gate		45
-	fec_gate		46
-	gpio1_gate		47
-	gpio2_gate		48
-	gpio3_gate		49
-	gpt_gate		50
-	i2c1_gate		51
-	i2c2_gate		52
-	i2c3_gate		53
-	iomuxc_gate		54
-	ipu_gate		55
-	kpp_gate		56
-	mlb_gate		57
-	mshc_gate		58
-	owire_gate		59
-	pwm_gate		60
-	rngc_gate		61
-	rtc_gate		62
-	rtic_gate		63
-	scc_gate		64
-	sdma_gate		65
-	spba_gate		66
-	spdif_gate		67
-	ssi1_gate		68
-	ssi2_gate		69
-	uart1_gate		70
-	uart2_gate		71
-	uart3_gate		72
-	usbotg_gate		73
-	wdog_gate		74
-	max_gate		75
-	admux_gate		76
-	csi_gate		77
-	csi_div			78
-	csi_sel			79
-	iim_gate		80
-	gpu2d_gate		81
-	ckli_gate		82
-
-Examples:
-
-clks: ccm@53f80000 {
-	compatible = "fsl,imx35-ccm";
-	reg = <0x53f80000 0x4000>;
-	interrupts = <31>;
-	#clock-cells = <1>;
-};
-
-esdhc1: esdhc@53fb4000 {
-	compatible = "fsl,imx35-esdhc";
-	reg = <0x53fb4000 0x4000>;
-	interrupts = <7>;
-	clocks = <&clks 9>, <&clks 8>, <&clks 43>;
-	clock-names = "ipg", "ahb", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
new file mode 100644
index 000000000000..6415bb6a8d04
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx35-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX35
+
+maintainers:
+  - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX35
+  clocks and IDs.
+
+        Clock			ID
+        ---------------------------
+        ckih			0
+        mpll			1
+        ppll			2
+        mpll_075		3
+        arm			4
+        hsp			5
+        hsp_div			6
+        hsp_sel			7
+        ahb			8
+        ipg			9
+        arm_per_div		10
+        ahb_per_div		11
+        ipg_per			12
+        uart_sel		13
+        uart_div		14
+        esdhc_sel		15
+        esdhc1_div		16
+        esdhc2_div		17
+        esdhc3_div		18
+        spdif_sel		19
+        spdif_div_pre		20
+        spdif_div_post		21
+        ssi_sel			22
+        ssi1_div_pre		23
+        ssi1_div_post		24
+        ssi2_div_pre		25
+        ssi2_div_post		26
+        usb_sel			27
+        usb_div			28
+        nfc_div			29
+        asrc_gate		30
+        pata_gate		31
+        audmux_gate		32
+        can1_gate		33
+        can2_gate		34
+        cspi1_gate		35
+        cspi2_gate		36
+        ect_gate		37
+        edio_gate		38
+        emi_gate		39
+        epit1_gate		40
+        epit2_gate		41
+        esai_gate		42
+        esdhc1_gate		43
+        esdhc2_gate		44
+        esdhc3_gate		45
+        fec_gate		46
+        gpio1_gate		47
+        gpio2_gate		48
+        gpio3_gate		49
+        gpt_gate		50
+        i2c1_gate		51
+        i2c2_gate		52
+        i2c3_gate		53
+        iomuxc_gate		54
+        ipu_gate		55
+        kpp_gate		56
+        mlb_gate		57
+        mshc_gate		58
+        owire_gate		59
+        pwm_gate		60
+        rngc_gate		61
+        rtc_gate		62
+        rtic_gate		63
+        scc_gate		64
+        sdma_gate		65
+        spba_gate		66
+        spdif_gate		67
+        ssi1_gate		68
+        ssi2_gate		69
+        uart1_gate		70
+        uart2_gate		71
+        uart3_gate		72
+        usbotg_gate		73
+        wdog_gate		74
+        max_gate		75
+        admux_gate		76
+        csi_gate		77
+        csi_div			78
+        csi_sel			79
+        iim_gate		80
+        gpu2d_gate		81
+        ckli_gate		82
+
+properties:
+  compatible:
+    const: fsl,imx35-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx35-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
deleted file mode 100644
index a24ca9e582d2..000000000000
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Clock bindings for Freescale i.MX5
-
-Required properties:
-- compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
-for the full list of i.MX5 clock IDs.
-
-Examples (for mx53):
-
-clks: ccm@53fd4000{
-	compatible = "fsl,imx53-ccm";
-	reg = <0x53fd4000 0x4000>;
-	interrupts = <0 71 0x04 0 72 0x04>;
-	#clock-cells = <1>;
-};
-
-can1: can@53fc8000 {
-	compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
-	reg = <0x53fc8000 0x4000>;
-	interrupts = <82>;
-	clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
new file mode 100644
index 000000000000..c0e19ff92c76
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx5-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX5
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
+  for the full list of i.MX5 clock IDs.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx53-ccm
+      - fsl,imx51-ccm
+      - fsl,imx50-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@53fd4000{
+        compatible = "fsl,imx53-ccm";
+        reg = <0x53fd4000 0x4000>;
+        interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 72 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
deleted file mode 100644
index 13d36d4c6991..000000000000
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Clock bindings for Freescale i.MX6 Quad
-
-Required properties:
-- compatible: Should be "fsl,imx6q-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-Optional properties:
-- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
-  on power off.
-  Use this property if the SoC should be powered off by external power
-  management IC (PMIC) triggered via PMIC_STBY_REQ signal.
-  Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
-  be using "syscon-poweroff" driver instead.
-- clocks: list of clock specifiers, must contain an entry for each entry
-          in clock-names
-- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
-for the full list of i.MX6 Quad and DualLite clock IDs.
-
-Examples:
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-
-clks: ccm@20c4000 {
-	compatible = "fsl,imx6q-ccm";
-	reg = <0x020c4000 0x4000>;
-	interrupts = <0 87 0x04 0 88 0x04>;
-	#clock-cells = <1>;
-};
-
-uart1: serial@2020000 {
-	compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-	reg = <0x02020000 0x4000>;
-	interrupts = <0 26 0x04>;
-	clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
new file mode 100644
index 000000000000..4f4637eddb8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 Quad
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6q-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 24m osc
+      - description: 32k osc
+      - description: ckih1 clock input
+      - description: anaclk1 clock input
+      - description: anaclk2 clock input
+
+  clock-names:
+    items:
+      - const: osc
+      - const: ckil
+      - const: ckih1
+      - const: anaclk1
+      - const: anaclk2
+
+  fsl,pmic-stby-poweroff:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Use this property if the SoC should be powered off by external power
+      management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+      Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+      be using "syscon-poweroff" driver instead.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6q-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.txt b/Documentation/devicetree/bindings/clock/imx6sl-clock.txt
deleted file mode 100644
index 15e40bdf147d..000000000000
--- a/Documentation/devicetree/bindings/clock/imx6sl-clock.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-* Clock bindings for Freescale i.MX6 SoloLite
-
-Required properties:
-- compatible: Should be "fsl,imx6sl-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sl-clock.h
-for the full list of i.MX6 SoloLite clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
new file mode 100644
index 000000000000..b83c8f43d664
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SoloLite
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6sl-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6sl-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
deleted file mode 100644
index fee849d5fdd1..000000000000
--- a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Clock bindings for Freescale i.MX6 SLL
-
-Required properties:
-- compatible: Should be "fsl,imx6sll-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-  entry in clock-names
-- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sll-clock.h
-for the full list of i.MX6 SLL clock IDs.
-
-Examples:
-
-#include <dt-bindings/clock/imx6sll-clock.h>
-
-clks: clock-controller@20c4000 {
-		compatible = "fsl,imx6sll-ccm";
-		reg = <0x020c4000 0x4000>;
-		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-		#clock-cells = <1>;
-		clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
-		clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
-};
-
-uart1: serial@2020000 {
-		compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
-		reg = <0x02020000 0x4000>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
-			 <&clks IMX6SLL_CLK_UART1_SERIAL>;
-		clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
new file mode 100644
index 000000000000..484894a4b23f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SLL
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6sll-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ipp_di0 clock input
+      - description: ipp_di1 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+      - const: ipp_di0
+      - const: ipp_di1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6sll-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+        clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.txt b/Documentation/devicetree/bindings/clock/imx6sx-clock.txt
deleted file mode 100644
index 22362b9b7ba3..000000000000
--- a/Documentation/devicetree/bindings/clock/imx6sx-clock.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* Clock bindings for Freescale i.MX6 SoloX
-
-Required properties:
-- compatible: Should be "fsl,imx6sx-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-  entry in clock-names
-- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sx-clock.h
-for the full list of i.MX6 SoloX clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
new file mode 100644
index 000000000000..e6c795657c24
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SoloX
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6sx-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ipp_di0 clock input
+      - description: ipp_di1 clock input
+      - description: anaclk1 clock input
+      - description: anaclk2 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+      - const: ipp_di0
+      - const: ipp_di1
+      - const: anaclk1
+      - const: anaclk2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6sx-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
+        clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
deleted file mode 100644
index 571d5039f663..000000000000
--- a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* Clock bindings for Freescale i.MX6 UltraLite
-
-Required properties:
-- compatible: Should be "fsl,imx6ul-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-  entry in clock-names
-- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6ul-clock.h
-for the full list of i.MX6 UltraLite clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
new file mode 100644
index 000000000000..6a51a3f51cd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 UltraLite
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6ul-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ipp_di0 clock input
+      - description: ipp_di1 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+      - const: ipp_di0
+      - const: ipp_di1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6ul-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+        clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.txt b/Documentation/devicetree/bindings/clock/imx7d-clock.txt
deleted file mode 100644
index 9d3026d81a68..000000000000
--- a/Documentation/devicetree/bindings/clock/imx7d-clock.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* Clock bindings for Freescale i.MX7 Dual
-
-Required properties:
-- compatible: Should be "fsl,imx7d-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-  entry in clock-names
-- clock-names: should include entries "ckil", "osc"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx7d-clock.h
-for the full list of i.MX7 Dual clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
new file mode 100644
index 000000000000..cefb61db01a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7d-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX7 Dual
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h
+  for the full list of i.MX7 Dual clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx7d-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@30380000 {
+        compatible = "fsl,imx7d-ccm";
+        reg = <0x30380000 0x10000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>;
+        clock-names = "ckil", "osc";
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt
deleted file mode 100644
index 93d89adb7afe..000000000000
--- a/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-* Clock bindings for Freescale i.MX7ULP
-
-i.MX7ULP Clock functions are under joint control of the System
-Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
-modules, and Core Mode Controller (CMC)1 blocks
-
-The clocking scheme provides clear separation between M4 domain
-and A7 domain. Except for a few clock sources shared between two
-domains, such as the System Oscillator clock, the Slow IRC (SIRC),
-and and the Fast IRC clock (FIRCLK), clock sources and clock
-management are separated and contained within each domain.
-
-M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
-A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
-
-Note: this binding doc is only for A7 clock domain.
-
-System Clock Generation (SCG) modules:
----------------------------------------------------------------------
-The System Clock Generation (SCG) is responsible for clock generation
-and distribution across this device. Functions performed by the SCG
-include: clock reference selection, generation of clock used to derive
-processor, system, peripheral bus and external memory interface clocks,
-source selection for peripheral clocks and control of power saving
-clock gating mode.
-
-Required properties:
-
-- compatible:	Should be "fsl,imx7ulp-scg1".
-- reg : 	Should contain registers location and length.
-- #clock-cells:	Should be <1>.
-- clocks:	Should contain the fixed input clocks.
-- clock-names:  Should contain the following clock names:
-		"rosc", "sosc", "sirc", "firc", "upll", "mpll".
-
-Peripheral Clock Control (PCC) modules:
----------------------------------------------------------------------
-The Peripheral Clock Control (PCC) is responsible for clock selection,
-optional division and clock gating mode for peripherals in their
-respected power domain
-
-Required properties:
-- compatible:	Should be one of:
-		  "fsl,imx7ulp-pcc2",
-		  "fsl,imx7ulp-pcc3".
-- reg : 	Should contain registers location and length.
-- #clock-cells:	Should be <1>.
-- clocks:	Should contain the fixed input clocks.
-- clock-names:  Should contain the following clock names:
-		"nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2",
-		"apll_pfd1", "apll_pfd0", "upll", "sosc_bus_clk",
-		"mpll", "firc_bus_clk", "rosc", "spll_bus_clk";
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-See include/dt-bindings/clock/imx7ulp-clock.h
-for the full list of i.MX7ULP clock IDs of each module.
-
-Examples:
-
-#include <dt-bindings/clock/imx7ulp-clock.h>
-
-scg1: scg1@403e0000 {
-	compatible = "fsl,imx7ulp-scg1;
-	reg = <0x403e0000 0x10000>;
-	clocks = <&rosc>, <&sosc>, <&sirc>,
-		 <&firc>, <&upll>, <&mpll>;
-	clock-names = "rosc", "sosc", "sirc",
-		      "firc", "upll", "mpll";
-	#clock-cells = <1>;
-};
-
-pcc2: pcc2@403f0000 {
-	compatible = "fsl,imx7ulp-pcc2";
-	reg = <0x403f0000 0x10000>;
-	#clock-cells = <1>;
-	clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-		 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-		 <&scg1 IMX7ULP_CLK_DDR_DIV>,
-		 <&scg1 IMX7ULP_CLK_APLL_PFD2>,
-		 <&scg1 IMX7ULP_CLK_APLL_PFD1>,
-		 <&scg1 IMX7ULP_CLK_APLL_PFD0>,
-		 <&scg1 IMX7ULP_CLK_UPLL>,
-		 <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
-		 <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
-		 <&scg1 IMX7ULP_CLK_ROSC>,
-		 <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
-	clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
-		      "apll_pfd2", "apll_pfd1", "apll_pfd0",
-		      "upll", "sosc_bus_clk", "mpll",
-		      "firc_bus_clk", "rosc", "spll_bus_clk";
-};
-
-usdhc1: usdhc@40380000 {
-	compatible = "fsl,imx7ulp-usdhc";
-	reg = <0x40380000 0x10000>;
-	interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-		 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-		 <&pcc2 IMX7ULP_CLK_USDHC1>;
-	clock-names ="ipg", "ahb", "per";
-	bus-width = <4>;
-};
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
new file mode 100644
index 000000000000..739c3378f8c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7ulp-pcc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX7ULP Peripheral Clock Control (PCC) modules
+
+maintainers:
+  - A.s. Dong <aisheng.dong@nxp.com>
+
+description: |
+  i.MX7ULP Clock functions are under joint control of the System
+  Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
+  modules, and Core Mode Controller (CMC)1 blocks
+
+  The clocking scheme provides clear separation between M4 domain
+  and A7 domain. Except for a few clock sources shared between two
+  domains, such as the System Oscillator clock, the Slow IRC (SIRC),
+  and and the Fast IRC clock (FIRCLK), clock sources and clock
+  management are separated and contained within each domain.
+
+  M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
+  A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
+
+  Note: this binding doc is only for A7 clock domain.
+
+  The Peripheral Clock Control (PCC) is responsible for clock selection,
+  optional division and clock gating mode for peripherals in their
+  respected power domain.
+
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/imx7ulp-clock.h for the full list of
+  i.MX7ULP clock IDs of each module.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx7ulp-pcc2
+      - fsl,imx7ulp-pcc3
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: nic1 bus clock
+      - description: nic1 clock
+      - description: ddr clock
+      - description: apll pfd2
+      - description: apll pfd1
+      - description: apll pfd0
+      - description: usb pll
+      - description: system osc bus clock
+      - description: fast internal reference clock bus
+      - description: rtc osc
+      - description: system pll bus clock
+
+  clock-names:
+    items:
+      - const: nic1_bus_clk
+      - const: nic1_clk
+      - const: ddr_clk
+      - const: apll_pfd2
+      - const: apll_pfd1
+      - const: apll_pfd0
+      - const: upll
+      - const: sosc_bus_clk
+      - const: firc_bus_clk
+      - const: rosc
+      - const: spll_bus_clk
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@403f0000 {
+        compatible = "fsl,imx7ulp-pcc2";
+        reg = <0x403f0000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+                 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+                 <&scg1 IMX7ULP_CLK_DDR_DIV>,
+                 <&scg1 IMX7ULP_CLK_APLL_PFD2>,
+                 <&scg1 IMX7ULP_CLK_APLL_PFD1>,
+                 <&scg1 IMX7ULP_CLK_APLL_PFD0>,
+                 <&scg1 IMX7ULP_CLK_UPLL>,
+                 <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
+                 <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
+                 <&scg1 IMX7ULP_CLK_ROSC>,
+                 <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
+         clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
+                       "apll_pfd2", "apll_pfd1", "apll_pfd0",
+                       "upll", "sosc_bus_clk", "firc_bus_clk",
+                       "rosc", "spll_bus_clk";
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
new file mode 100644
index 000000000000..d06344d7e34f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7ulp-scg-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX7ULP System Clock Generation (SCG) modules
+
+maintainers:
+  - A.s. Dong <aisheng.dong@nxp.com>
+
+description: |
+  i.MX7ULP Clock functions are under joint control of the System
+  Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
+  modules, and Core Mode Controller (CMC)1 blocks
+
+  The clocking scheme provides clear separation between M4 domain
+  and A7 domain. Except for a few clock sources shared between two
+  domains, such as the System Oscillator clock, the Slow IRC (SIRC),
+  and and the Fast IRC clock (FIRCLK), clock sources and clock
+  management are separated and contained within each domain.
+
+  M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
+  A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
+
+  Note: this binding doc is only for A7 clock domain.
+
+  The System Clock Generation (SCG) is responsible for clock generation
+  and distribution across this device. Functions performed by the SCG
+  include: clock reference selection, generation of clock used to derive
+  processor, system, peripheral bus and external memory interface clocks,
+  source selection for peripheral clocks and control of power saving
+  clock gating mode.
+
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/imx7ulp-clock.h for the full list of
+  i.MX7ULP clock IDs of each module.
+
+properties:
+  compatible:
+    const: fsl,imx7ulp-scg1
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: rtc osc
+      - description: system osc
+      - description: slow internal reference clock
+      - description: fast internal reference clock
+      - description: usb PLL
+
+  clock-names:
+    items:
+      - const: rosc
+      - const: sosc
+      - const: sirc
+      - const: firc
+      - const: upll
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@403e0000 {
+        compatible = "fsl,imx7ulp-scg1";
+        reg = <0x403e0000 0x10000>;
+        clocks = <&rosc>, <&sosc>, <&sirc>,
+                 <&firc>, <&upll>;
+        clock-names = "rosc", "sosc", "sirc",
+                      "firc", "upll";
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
new file mode 100644
index 000000000000..458c7645ee68
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8m-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Family Clock Control Module Binding
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  NXP i.MX8M Mini/Nano/Plus/Quad clock control module is an integrated clock
+  controller, which generates and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mm-ccm
+      - fsl,imx8mn-ccm
+      - fsl,imx8mp-ccm
+      - fsl,imx8mq-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 6
+    maxItems: 7
+
+  clock-names:
+    minItems: 6
+    maxItems: 7
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8m-clock.h
+      for the full list of i.MX8M clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-ccm
+    then:
+      properties:
+        clocks:
+          items:
+            - description: 32k osc
+            - description: 25m osc
+            - description: 27m osc
+            - description: ext1 clock input
+            - description: ext2 clock input
+            - description: ext3 clock input
+            - description: ext4 clock input
+        clock-names:
+          items:
+            - const: ckil
+            - const: osc_25m
+            - const: osc_27m
+            - const: clk_ext1
+            - const: clk_ext2
+            - const: clk_ext3
+            - const: clk_ext4
+    else:
+      properties:
+        clocks:
+          items:
+            - description: 32k osc
+            - description: 24m osc
+            - description: ext1 clock input
+            - description: ext2 clock input
+            - description: ext3 clock input
+            - description: ext4 clock input
+
+        clock-names:
+          items:
+            - const: osc_32k
+            - const: osc_24m
+            - const: clk_ext1
+            - const: clk_ext2
+            - const: clk_ext3
+            - const: clk_ext4
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    clock-controller@30380000 {
+        compatible = "fsl,imx8mm-ccm";
+        reg = <0x30380000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+                 <&clk_ext3>, <&clk_ext4>;
+        clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+                      "clk_ext3", "clk_ext4";
+    };
+
+  - |
+    clock-controller@30390000 {
+        compatible = "fsl,imx8mq-ccm";
+        reg = <0x30380000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc_25m>, <&osc_27m>, <&clk_ext1>,
+                 <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
+        clock-names = "ckil", "osc_25m", "osc_27m", "clk_ext1",
+                      "clk_ext2", "clk_ext3", "clk_ext4";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imx8mm-clock.txt b/Documentation/devicetree/bindings/clock/imx8mm-clock.txt
deleted file mode 100644
index 8e4ab9e619a1..000000000000
--- a/Documentation/devicetree/bindings/clock/imx8mm-clock.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Clock bindings for NXP i.MX8M Mini
-
-Required properties:
-- compatible: Should be "fsl,imx8mm-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-          entry in clock-names
-- clock-names: should include the following entries:
-    - "osc_32k"
-    - "osc_24m"
-    - "clk_ext1"
-    - "clk_ext2"
-    - "clk_ext3"
-    - "clk_ext4"
-
-clk: clock-controller@30380000 {
-	compatible = "fsl,imx8mm-ccm";
-	reg = <0x0 0x30380000 0x0 0x10000>;
-	#clock-cells = <1>;
-	clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
-		 <&clk_ext3>, <&clk_ext4>;
-	clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
-		      "clk_ext3", "clk_ext4";
-};
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h
-for the full list of i.MX8M Mini clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
deleted file mode 100644
index cd0b8a341321..000000000000
--- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
+++ /dev/null
@@ -1,112 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/imx8mn-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NXP i.MX8M Nano Clock Control Module Binding
-
-maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
-
-description: |
-  NXP i.MX8M Nano clock control module is an integrated clock controller, which
-  generates and supplies to all modules.
-
-properties:
-  compatible:
-    const: fsl,imx8mn-ccm
-
-  reg:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: 32k osc
-      - description: 24m osc
-      - description: ext1 clock input
-      - description: ext2 clock input
-      - description: ext3 clock input
-      - description: ext4 clock input
-
-  clock-names:
-    items:
-      - const: osc_32k
-      - const: osc_24m
-      - const: clk_ext1
-      - const: clk_ext2
-      - const: clk_ext3
-      - const: clk_ext4
-
-  '#clock-cells':
-    const: 1
-    description: |
-      The clock consumer should specify the desired clock by having the clock
-      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mn-clock.h
-      for the full list of i.MX8M Nano clock IDs.
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-
-examples:
-  # Clock Control Module node:
-  - |
-    clk: clock-controller@30380000 {
-        compatible = "fsl,imx8mn-ccm";
-        reg = <0x0 0x30380000 0x0 0x10000>;
-        #clock-cells = <1>;
-        clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>,
-                 <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
-        clock-names = "osc_32k", "osc_24m", "clk_ext1",
-                      "clk_ext2", "clk_ext3", "clk_ext4";
-    };
-
-  # Required external clocks for Clock Control Module node:
-  - |
-    osc_32k: clock-osc-32k {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <32768>;
-        clock-output-names = "osc_32k";
-    };
-
-    osc_24m: clock-osc-24m {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <24000000>;
-        clock-output-names = "osc_24m";
-    };
-
-    clk_ext1: clock-ext1 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <133000000>;
-        clock-output-names = "clk_ext1";
-    };
-
-    clk_ext2: clock-ext2 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <133000000>;
-        clock-output-names = "clk_ext2";
-    };
-
-    clk_ext3: clock-ext3 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <133000000>;
-        clock-output-names = "clk_ext3";
-    };
-
-    clk_ext4: clock-ext4 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency= <133000000>;
-        clock-output-names = "clk_ext4";
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
deleted file mode 100644
index 89aee63c9019..000000000000
--- a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
+++ /dev/null
@@ -1,68 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/imx8mp-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NXP i.MX8M Plus Clock Control Module Binding
-
-maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
-
-description:
-  NXP i.MX8M Plus clock control module is an integrated clock controller, which
-  generates and supplies to all modules.
-
-properties:
-  compatible:
-    const: fsl,imx8mp-ccm
-
-  reg:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: 32k osc
-      - description: 24m osc
-      - description: ext1 clock input
-      - description: ext2 clock input
-      - description: ext3 clock input
-      - description: ext4 clock input
-
-  clock-names:
-    items:
-      - const: osc_32k
-      - const: osc_24m
-      - const: clk_ext1
-      - const: clk_ext2
-      - const: clk_ext3
-      - const: clk_ext4
-
-  '#clock-cells':
-    const: 1
-    description:
-      The clock consumer should specify the desired clock by having the clock
-      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mp-clock.h
-      for the full list of i.MX8M Plus clock IDs.
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-
-examples:
-  # Clock Control Module node:
-  - |
-    clk: clock-controller@30380000 {
-        compatible = "fsl,imx8mp-ccm";
-        reg = <0x30380000 0x10000>;
-        #clock-cells = <1>;
-        clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>,
-                 <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
-        clock-names = "osc_32k", "osc_24m", "clk_ext1",
-                      "clk_ext2", "clk_ext3", "clk_ext4";
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt
deleted file mode 100644
index 52de8263e012..000000000000
--- a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Clock bindings for NXP i.MX8M Quad
-
-Required properties:
-- compatible: Should be "fsl,imx8mq-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-          entry in clock-names
-- clock-names: should include the following entries:
-    - "ckil"
-    - "osc_25m"
-    - "osc_27m"
-    - "clk_ext1"
-    - "clk_ext2"
-    - "clk_ext3"
-    - "clk_ext4"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx8mq-clock.h
-for the full list of i.MX8M Quad clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt
deleted file mode 100644
index 965cfa42e025..000000000000
--- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
-
-The Low-Power Clock Gate (LPCG) modules contain a local programming
-model to control the clock gates for the peripherals. An LPCG module
-is used to locally gate the clocks for the associated peripheral.
-
-Note:
-This level of clock gating is provided after the clocks are generated
-by the SCU resources and clock controls. Thus even if the clock is
-enabled by these control bits, it might still not be running based
-on the base resource.
-
-Required properties:
-- compatible:	Should be one of:
-		  "fsl,imx8qxp-lpcg-adma",
-		  "fsl,imx8qxp-lpcg-conn",
-		  "fsl,imx8qxp-lpcg-dc",
-		  "fsl,imx8qxp-lpcg-dsp",
-		  "fsl,imx8qxp-lpcg-gpu",
-		  "fsl,imx8qxp-lpcg-hsio",
-		  "fsl,imx8qxp-lpcg-img",
-		  "fsl,imx8qxp-lpcg-lsio",
-		  "fsl,imx8qxp-lpcg-vpu"
-- reg:		Address and length of the register set
-- #clock-cells:	Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-See the full list of clock IDs from:
-include/dt-bindings/clock/imx8qxp-clock.h
-
-Examples:
-
-#include <dt-bindings/clock/imx8qxp-clock.h>
-
-conn_lpcg: clock-controller@5b200000 {
-	compatible = "fsl,imx8qxp-lpcg-conn";
-	reg = <0x5b200000 0xb0000>;
-	#clock-cells = <1>;
-};
-
-usdhc1: mmc@5b010000 {
-	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-	interrupt-parent = <&gic>;
-	interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
-	reg = <0x5b010000 0x10000>;
-	clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>,
-		 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>,
-		 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>;
-	clock-names = "ipg", "per", "ahb";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
new file mode 100644
index 000000000000..cb80105b3c70
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
+
+maintainers:
+  - Aisheng Dong <aisheng.dong@nxp.com>
+
+description: |
+  The Low-Power Clock Gate (LPCG) modules contain a local programming
+  model to control the clock gates for the peripherals. An LPCG module
+  is used to locally gate the clocks for the associated peripheral.
+
+  This level of clock gating is provided after the clocks are generated
+  by the SCU resources and clock controls. Thus even if the clock is
+  enabled by these control bits, it might still not be running based
+  on the base resource.
+
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See the full list of clock IDs from:
+  include/dt-bindings/clock/imx8-lpcg.h
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx8qxp-lpcg
+      - items:
+          - enum:
+              - fsl,imx8qm-lpcg
+          - const: fsl,imx8qxp-lpcg
+      - enum:
+          - fsl,imx8qxp-lpcg-adma
+          - fsl,imx8qxp-lpcg-conn
+          - fsl,imx8qxp-lpcg-dc
+          - fsl,imx8qxp-lpcg-dsp
+          - fsl,imx8qxp-lpcg-gpu
+          - fsl,imx8qxp-lpcg-hsio
+          - fsl,imx8qxp-lpcg-img
+          - fsl,imx8qxp-lpcg-lsio
+          - fsl,imx8qxp-lpcg-vpu
+        deprecated: true
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    description: |
+      Input parent clocks phandle array for each clock
+    minItems: 1
+    maxItems: 8
+
+  clock-indices:
+    description: |
+      An integer array indicating the bit offset for each clock.
+      Refer to <include/dt-bindings/clock/imx8-lpcg.h> for the
+      supported LPCG clock indices.
+    minItems: 1
+    maxItems: 8
+
+  clock-output-names:
+    description: |
+      Shall be the corresponding names of the outputs.
+      NOTE this property must be specified in the same order
+      as the clock-indices property.
+    minItems: 1
+    maxItems: 8
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sdhc0_lpcg: clock-controller@5b200000 {
+        compatible = "fsl,imx8qxp-lpcg";
+        reg = <0x5b200000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&sdhc0_clk IMX_SC_PM_CLK_PER>,
+                 <&conn_ipg_clk>,
+                 <&conn_axi_clk>;
+        clock-indices = <IMX_LPCG_CLK_0>,
+                        <IMX_LPCG_CLK_4>,
+                        <IMX_LPCG_CLK_5>;
+        clock-output-names = "sdhc0_lpcg_per_clk",
+                             "sdhc0_lpcg_ipg_clk",
+                             "sdhc0_lpcg_ahb_clk";
+        power-domains = <&pd IMX_SC_R_SDHC_0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml
new file mode 100644
index 000000000000..71f7186b135b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8ulp-cgc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8ULP Clock Generation & Control(CGC) Module Binding
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  On i.MX8ULP, The clock sources generation, distribution and management is
+  under the control of several CGCs & PCCs modules. The CGC modules generate
+  and distribute clocks on the device.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8ulp-cgc1
+      - fsl,imx8ulp-cgc2
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Generation & Control Module node:
+  - |
+    clock-controller@292c0000 {
+        compatible = "fsl,imx8ulp-cgc1";
+        reg = <0x292c0000 0x10000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml
new file mode 100644
index 000000000000..00612725bf8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8ulp-pcc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8ULP Peripheral Clock Controller(PCC) Module Binding
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  On i.MX8ULP, The clock sources generation, distribution and management is
+  under the control of several CGCs & PCCs modules. The PCC modules control
+  software reset, clock selection, optional division and clock gating mode
+  for peripherals.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8ulp-pcc3
+      - fsl,imx8ulp-pcc4
+      - fsl,imx8ulp-pcc5
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  # Peripheral Clock Control Module node:
+  - |
+    clock-controller@292d0000 {
+        compatible = "fsl,imx8ulp-pcc3";
+        reg = <0x292d0000 0x10000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx93-clock.yaml b/Documentation/devicetree/bindings/clock/imx93-clock.yaml
new file mode 100644
index 000000000000..21a06194e4a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx93-clock.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx93-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 Clock Control Module Binding
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  i.MX93 clock control module is an integrated clock controller, which
+  includes clock generator, clock gate and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx93-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      specify the external clocks used by the CCM module.
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ext1 clock input
+
+  clock-names:
+    description:
+      specify the external clocks names used by the CCM module.
+    items:
+      - const: osc_32k
+      - const: osc_24m
+      - const: clk_ext1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/imx93-clock.h for the full list of
+      i.MX93 clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    clock-controller@44450000 {
+        compatible = "fsl,imx93-ccm";
+        reg = <0x44450000 0x10000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml
new file mode 100644
index 000000000000..03fc5c1a2939
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imxrt1050-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MXRT
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imxrt*-clock.h
+  for the full list of i.MXRT clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imxrt1050-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    description: 24m osc
+    maxItems: 1
+
+  clock-names:
+    const: osc
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imxrt1050-clock.h>
+
+    clks: clock-controller@400fc000 {
+        compatible = "fsl,imxrt1050-ccm";
+        reg = <0x400fc000 0x4000>;
+        interrupts = <95>, <96>;
+        clocks = <&osc>;
+        clock-names = "osc";
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
deleted file mode 100644
index 75598e655067..000000000000
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Ingenic SoC CGU binding
-
-The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
-typically includes a variety of PLLs, multiplexers, dividers & gates in order
-to provide many different clock signals derived from only 2 external source
-clocks.
-
-Required properties:
-- compatible : Should be one of:
-  * ingenic,jz4740-cgu
-  * ingenic,jz4725b-cgu
-  * ingenic,jz4770-cgu
-  * ingenic,jz4780-cgu
-  * ingenic,x1000-cgu
-- reg : The address & length of the CGU registers.
-- clocks : List of phandle & clock specifiers for clocks external to the CGU.
-  Two such external clocks should be specified - first the external crystal
-  "ext" and second the RTC clock source "rtc".
-- clock-names : List of name strings for the external clocks.
-- #clock-cells: Should be 1.
-  Clock consumers specify this argument to identify a clock. The valid values
-  may be found in <dt-bindings/clock/<soctype>-cgu.h>.
-
-Example SoC include file:
-
-/ {
-	cgu: jz4740-cgu {
-		compatible = "ingenic,jz4740-cgu";
-		reg = <0x10000000 0x100>;
-		#clock-cells = <1>;
-	};
-
-	uart0: serial@10030000 {
-		clocks = <&cgu JZ4740_CLK_UART0>;
-	};
-};
-
-Example board file:
-
-/ {
-	ext: clock@0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-	};
-
-	rtc: clock@1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-
-	&cgu {
-		clocks = <&ext> <&rtc>;
-		clock-names: "ext", "rtc";
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
new file mode 100644
index 000000000000..aa1df03ef4a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ingenic,cgu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs CGU devicetree bindings
+
+description: |
+  The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
+  typically includes a variety of PLLs, multiplexers, dividers & gates in order
+  to provide many different clock signals derived from only 2 external source
+  clocks.
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ingenic,jz4740-cgu
+          - ingenic,jz4725b-cgu
+          - ingenic,jz4760-cgu
+          - ingenic,jz4760b-cgu
+          - ingenic,jz4770-cgu
+          - ingenic,jz4780-cgu
+          - ingenic,x1000-cgu
+          - ingenic,x1830-cgu
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^clock-controller@[0-9a-f]+$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  "#clock-cells":
+    const: 1
+
+  ranges: true
+
+  compatible:
+    items:
+      - enum:
+          - ingenic,jz4740-cgu
+          - ingenic,jz4725b-cgu
+          - ingenic,jz4760-cgu
+          - ingenic,jz4760b-cgu
+          - ingenic,jz4770-cgu
+          - ingenic,jz4780-cgu
+          - ingenic,x1000-cgu
+          - ingenic,x1830-cgu
+      - const: simple-mfd
+    minItems: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: External oscillator clock
+      - description: Internal 32 kHz RTC clock
+
+  clock-names:
+    items:
+      - const: ext
+      - enum:
+          - rtc
+          - osc32k # Different name, same clock
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 64
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 64
+
+  assigned-clock-rates:
+    minItems: 1
+    maxItems: 64
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+patternProperties:
+  "^usb-phy@[a-f0-9]+$":
+    allOf: [ $ref: "../phy/ingenic,phy-usb.yaml#" ]
+  "^mac-phy-ctrl@[a-f0-9]+$":
+    allOf: [ $ref: "../net/ingenic,mac.yaml#" ]
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+    cgu: clock-controller@10000000 {
+      compatible = "ingenic,jz4770-cgu", "simple-mfd";
+      reg = <0x10000000 0x100>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0x0 0x10000000 0x100>;
+
+      clocks = <&ext>, <&osc32k>;
+      clock-names = "ext", "osc32k";
+
+      #clock-cells = <1>;
+
+      otg_phy: usb-phy@3c {
+        compatible = "ingenic,jz4770-phy";
+        reg = <0x3c 0x10>;
+
+        clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+        vcc-supply = <&ldo5>;
+
+        #phy-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/intc_stratix10.txt b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
deleted file mode 100644
index 9f4ec5cb5c6b..000000000000
--- a/Documentation/devicetree/bindings/clock/intc_stratix10.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Device Tree Clock bindings for Intel's SoCFPGA Stratix10 platform
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be
-	"intel,stratix10-clkmgr"
-
-- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
-
-- #clock-cells : from common clock binding, shall be set to 1.
-
-Example:
-	clkmgr: clock-controller@ffd10000 {
-		compatible = "intel,stratix10-clkmgr";
-		reg = <0xffd10000 0x1000>;
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/intel,agilex.yaml b/Documentation/devicetree/bindings/clock/intel,agilex.yaml
new file mode 100644
index 000000000000..cf5a9eb803e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,agilex.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,agilex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Agilex platform clock controller binding
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+description:
+  The Intel Agilex Clock controller is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    const: intel,agilex-clkmgr
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock controller node:
+  - |
+    clkmgr: clock-controller@ffd10000 {
+      compatible = "intel,agilex-clkmgr";
+      reg = <0xffd10000 0x1000>;
+      clocks = <&osc1>;
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
new file mode 100644
index 000000000000..f3e1a700a2ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,cgu-lgm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain SoC's Clock Controller(CGU) Binding
+
+maintainers:
+  - Rahul Tanwar <rahul.tanwar@linux.intel.com>
+
+description: |
+  Lightning Mountain(LGM) SoC's Clock Generation Unit(CGU) driver provides
+  all means to access the CGU hardware module in order to generate a series
+  of clocks for the whole system and individual peripherals.
+
+  Please refer to include/dt-bindings/clock/intel,lgm-clk.h header file, it
+  defines all available clocks as macros. These macros can be used in device
+  tree sources.
+
+properties:
+  compatible:
+    const: intel,cgu-lgm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    cgu: clock-controller@e0200000 {
+        compatible = "intel,cgu-lgm";
+        reg = <0xe0200000 0x33c>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml b/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml
new file mode 100644
index 000000000000..8f45976e946e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,easic-n5x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA eASIC N5X platform clock controller binding
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+description:
+  The Intel eASIC N5X Clock controller is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    const: intel,easic-n5x-clkmgr
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock controller node:
+  - |
+    clkmgr: clock-controller@ffd10000 {
+      compatible = "intel,easic-n5x-clkmgr";
+      reg = <0xffd10000 0x1000>;
+      clocks = <&osc1>;
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/intel,stratix10.yaml b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml
new file mode 100644
index 000000000000..f506e3db9782
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,stratix10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Stratix10 platform clock controller binding
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  compatible:
+    const: intel,stratix10-clkmgr
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ffd10000 {
+        compatible = "intel,stratix10-clkmgr";
+        reg = <0xffd10000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
new file mode 100644
index 000000000000..175f5c8f2bc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,armada-3700-uart-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Marvell Armada 3720 UART clocks
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+
+properties:
+  compatible:
+    const: marvell,armada-3700-uart-clock
+
+  reg:
+    items:
+      - description: UART Clock Control Register
+      - description: UART 2 Baud Rate Divisor Register
+
+  clocks:
+    description: |
+      List of parent clocks suitable for UART from following set:
+        "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal"
+      UART clock can use one from this set and when more are provided
+      then kernel would choose and configure the most suitable one.
+      It is suggest to specify at least one TBG clock to achieve
+      baudrates above 230400 and also to specify clock which bootloader
+      used for UART (most probably xtal) for smooth boot log on UART.
+
+  clock-names:
+    items:
+      - const: TBG-A-P
+      - const: TBG-B-P
+      - const: TBG-A-S
+      - const: TBG-B-S
+      - const: xtal
+    minItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    uartclk: clock-controller@12010 {
+      compatible = "marvell,armada-3700-uart-clock";
+      reg = <0x12010 0x4>, <0x12210 0x4>;
+      clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>;
+      clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal";
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2-audio-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mmp2-audio-clock.yaml
new file mode 100644
index 000000000000..dffa73402da9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,mmp2-audio-clock.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,mmp2-audio-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP2 Audio Clock Controller
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+  The audio clock controller generates and supplies the clocks to the audio
+  codec.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify the clock which they consume.
+
+  All these identifiers could be found in
+  <dt-bindings/clock/marvell,mmp2-audio.h>.
+
+properties:
+  compatible:
+    enum:
+      - marvell,mmp2-audio-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Audio subsystem clock
+      - description: The crystal oscillator clock
+      - description: First I2S clock
+      - description: Second I2S clock
+
+  clock-names:
+    items:
+      - const: audio
+      - const: vctcxo
+      - const: i2s0
+      - const: i2s1
+
+  '#clock-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2-audio.h>
+    #include <dt-bindings/clock/marvell,mmp2.h>
+    #include <dt-bindings/power/marvell,mmp2.h>
+
+    clock-controller@d42a0c30 {
+      compatible = "marvell,mmp2-audio-clock";
+      reg = <0xd42a0c30 0x10>;
+      clock-names = "audio", "vctcxo", "i2s0", "i2s1";
+      clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+               <&soc_clocks MMP2_CLK_VCTCXO>,
+               <&soc_clocks MMP2_CLK_I2S0>,
+               <&soc_clocks MMP2_CLK_I2S1>;
+      power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml
new file mode 100644
index 000000000000..d68f0d196e7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,mmp2-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP2 and MMP3 Clock Controller
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+  The clock subsystem on MMP2 or MMP3 generates and supplies clock to various
+  controllers within the SoC.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify the clock which they consume.
+
+  All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>.
+
+properties:
+  compatible:
+    enum:
+      - marvell,mmp2-clock # controller compatible with MMP2 SoC
+      - marvell,mmp3-clock # controller compatible with MMP3 SoC
+
+  reg:
+    items:
+      - description: MPMU register region
+      - description: APMU register region
+      - description: APBC register region
+
+  reg-names:
+    items:
+      - const: mpmu
+      - const: apmu
+      - const: apbc
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@d4050000 {
+      compatible = "marvell,mmp2-clock";
+      reg = <0xd4050000 0x1000>,
+            <0xd4282800 0x400>,
+            <0xd4015000 0x1000>;
+      reg-names = "mpmu", "apmu", "apbc";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt
deleted file mode 100644
index 23b52dc02266..000000000000
--- a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Marvell MMP2 Clock Controller
-
-The MMP2 clock subsystem generates and supplies clock to various
-controllers within the MMP2 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "marvell,mmp2-clock" - controller compatible with MMP2 SoC.
-
-- reg: physical base address of the clock subsystem and length of memory mapped
-  region. There are 3 places in SOC has clock control logic:
-  "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
-
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes use this identifier
-to specify the clock which they consume.
-
-All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>.
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
index 3472b461ca93..c10849efb444 100644
--- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt
+++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -49,7 +49,7 @@ Example:
 		max77686: max77686@9 {
 			compatible = "maxim,max77686";
 			interrupt-parent = <&wakeup_eint>;
-			interrupts = <26 0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
 			reg = <0x09>;
 			#clock-cells = <1>;
 
@@ -74,7 +74,7 @@ Example:
 		max77802: max77802@9 {
 			compatible = "maxim,max77802";
 			interrupt-parent = <&wakeup_eint>;
-			interrupts = <26 0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
 			reg = <0x09>;
 			#clock-cells = <1>;
 
diff --git a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
new file mode 100644
index 000000000000..731bfe0408c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/mediatek,apmixedsys.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek AP Mixedsys Controller
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description:
+  The Mediatek apmixedsys controller provides PLLs to the system.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6797-apmixedsys
+          - mediatek,mt7622-apmixedsys
+          - mediatek,mt7986-apmixedsys
+          - mediatek,mt8135-apmixedsys
+          - mediatek,mt8173-apmixedsys
+          - mediatek,mt8516-apmixedsys
+      - items:
+          - const: mediatek,mt7623-apmixedsys
+          - const: mediatek,mt2701-apmixedsys
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt2701-apmixedsys
+              - mediatek,mt2712-apmixedsys
+              - mediatek,mt6765-apmixedsys
+              - mediatek,mt6779-apmixedsys
+              - mediatek,mt6795-apmixedsys
+              - mediatek,mt7629-apmixedsys
+              - mediatek,mt8167-apmixedsys
+              - mediatek,mt8183-apmixedsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apmixedsys: clock-controller@10209000 {
+        compatible = "mediatek,mt8173-apmixedsys";
+        reg = <0x10209000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml
new file mode 100644
index 000000000000..04469eabc8fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt6795-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT6795
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6795-mfgcfg
+      - mediatek,mt6795-vdecsys
+      - mediatek,mt6795-vencsys
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mfgcfg: clock-controller@13000000 {
+            compatible = "mediatek,mt6795-mfgcfg";
+            reg = <0 0x13000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vdecsys: clock-controller@16000000 {
+            compatible = "mediatek,mt6795-vdecsys";
+            reg = <0 0x16000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vencsys: clock-controller@18000000 {
+            compatible = "mediatek,mt6795-vencsys";
+            reg = <0 0x18000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml
new file mode 100644
index 000000000000..378b761237d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt6795-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT6795
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The Mediatek system clock controller provides various clocks and system
+  configuration like reset and bus protection on MT6795.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt6795-apmixedsys
+          - mediatek,mt6795-infracfg
+          - mediatek,mt6795-pericfg
+          - mediatek,mt6795-topckgen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        topckgen: clock-controller@10000000 {
+            compatible = "mediatek,mt6795-topckgen", "syscon";
+            reg = <0 0x10000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
new file mode 100644
index 000000000000..b42f0f5c11b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7621-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT7621 Clock
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  The MT7621 has a PLL controller from where the cpu clock is provided
+  as well as derived clocks for the bus and the peripherals. It also
+  can gate SoC device clocks.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify the clock which they consume.
+
+  All these identifiers could be found in:
+  [1]: <include/dt-bindings/clock/mt7621-clk.h>.
+
+  The clocks are provided inside a system controller node.
+
+  This node is also a reset provider for all the peripherals.
+
+  Reset related bits are defined in:
+  [2]: <include/dt-bindings/reset/mt7621-reset.h>.
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt7621-sysc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+  "#reset-cells":
+    description:
+      The first cell indicates the reset bit within the register, see
+      [2] for available resets.
+    const: 1
+
+  ralink,memctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of syscon used to control memory registers
+
+  clock-output-names:
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - ralink,memctl
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7621-clk.h>
+
+    sysc: sysc@0 {
+      compatible = "mediatek,mt7621-sysc", "syscon";
+      reg = <0x0 0x100>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      ralink,memctl = <&memc>;
+      clock-output-names = "xtal", "cpu", "bus",
+                           "50m", "125m", "150m",
+                           "250m", "270m";
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml
new file mode 100644
index 000000000000..b327ecb4e524
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-apu
+          - mediatek,mt8365-imgsys
+          - mediatek,mt8365-mfgcfg
+          - mediatek,mt8365-vdecsys
+          - mediatek,mt8365-vencsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apu: clock-controller@19020000 {
+        compatible = "mediatek,mt8365-apu", "syscon";
+        reg = <0x19020000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml
new file mode 100644
index 000000000000..643f84660c8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+description:
+  The apmixedsys module provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provides the clock source to other IP blocks.
+  The infracfg_ao and pericfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-topckgen
+          - mediatek,mt8365-infracfg
+          - mediatek,mt8365-apmixedsys
+          - mediatek,mt8365-pericfg
+          - mediatek,mt8365-mcucfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: clock-controller@10000000 {
+        compatible = "mediatek,mt8365-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
new file mode 100644
index 000000000000..81531b5b0db7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/mediatek,topckgen.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Top Clock Generator Controller
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description:
+  The Mediatek topckgen controller provides various clocks to the system.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6797-topckgen
+          - mediatek,mt7622-topckgen
+          - mediatek,mt8135-topckgen
+          - mediatek,mt8173-topckgen
+          - mediatek,mt8516-topckgen
+      - items:
+          - const: mediatek,mt7623-topckgen
+          - const: mediatek,mt2701-topckgen
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt2701-topckgen
+              - mediatek,mt2712-topckgen
+              - mediatek,mt6765-topckgen
+              - mediatek,mt6779-topckgen
+              - mediatek,mt6795-topckgen
+              - mediatek,mt7629-topckgen
+              - mediatek,mt7986-topckgen
+              - mediatek,mt8167-topckgen
+              - mediatek,mt8183-topckgen
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: clock-controller@10000000 {
+        compatible = "mediatek,mt8173-topckgen";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml b/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml
new file mode 100644
index 000000000000..df2bec188706
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,lan966x-gck.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966X Generic Clock Controller
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description: |
+  The LAN966X Generic clock controller contains 3 PLLs - cpu_clk,
+  ddr_clk and sys_clk. This clock controller generates and supplies
+  clock to various peripherals within the SoC.
+
+properties:
+  compatible:
+    const: microchip,lan966x-gck
+
+  reg:
+    minItems: 1
+    items:
+      - description: Generic clock registers
+      - description: Optional gate clock registers
+
+  clocks:
+    items:
+      - description: CPU clock source
+      - description: DDR clock source
+      - description: System clock source
+
+  clock-names:
+    items:
+      - const: cpu
+      - const: ddr
+      - const: sys
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clks: clock-controller@e00c00a8 {
+        compatible = "microchip,lan966x-gck";
+        #clock-cells = <1>;
+        clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+        clock-names = "cpu", "ddr", "sys";
+        reg = <0xe00c00a8 0x38>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml
new file mode 100644
index 000000000000..f1770360798f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-ccc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC Fabric Clock Conditioning Circuitry
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  Microchip PolarFire SoC has 4 Clock Conditioning Circuitry blocks. Each of
+  these blocks contains two PLLs and 2 DLLs & are located in the four corners of
+  the FPGA. For more information see "PolarFire SoC FPGA Clocking Resources" at:
+  https://onlinedocs.microchip.com/pr/GUID-8F0CC4C0-0317-4262-89CA-CE7773ED1931-en-US-1/index.html
+
+properties:
+  compatible:
+    const: microchip,mpfs-ccc
+
+  reg:
+    items:
+      - description: PLL0's control registers
+      - description: PLL1's control registers
+      - description: DLL0's control registers
+      - description: DLL1's control registers
+
+  clocks:
+    description:
+      The CCC PLL's have two input clocks. It is required that even if the input
+      clocks are identical that both are provided.
+    minItems: 2
+    items:
+      - description: PLL0's refclk0
+      - description: PLL0's refclk1
+      - description: PLL1's refclk0
+      - description: PLL1's refclk1
+      - description: DLL0's refclk
+      - description: DLL1's refclk
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pll0_ref0
+      - const: pll0_ref1
+      - const: pll1_ref0
+      - const: pll1_ref1
+      - const: dll0_ref
+      - const: dll1_ref
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@38100000 {
+        compatible = "microchip,mpfs-ccc";
+        reg = <0x38010000 0x1000>, <0x38020000 0x1000>,
+              <0x39010000 0x1000>, <0x39020000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+                  <&refclk_ccc>, <&refclk_ccc>;
+        clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+                      "dll0_ref", "dll1_ref";
+    };
diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml
new file mode 100644
index 000000000000..b2ce78722247
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-clkcfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Clock Control Module Binding
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+description: |
+  Microchip PolarFire clock control (CLKCFG) is an integrated clock controller,
+  which gates and enables all peripheral clocks.
+
+  This device tree binding describes 33 gate clocks.  Clocks are referenced by
+  user nodes by the CLKCFG node phandle and the clock index in the group, from
+  0 to 32.
+
+properties:
+  compatible:
+    const: microchip,mpfs-clkcfg
+
+  reg:
+    items:
+      - description: |
+          clock config registers:
+          These registers contain enable, reset & divider tables for the, cpu,
+          axi, ahb and rtc/mtimer reference clocks as well as enable and reset
+          for the peripheral clocks.
+      - description: |
+          mss pll dri registers:
+          Block of registers responsible for dynamic reconfiguration of the mss
+          pll
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+  resets:
+    maxItems: 1
+
+  '#reset-cells':
+    description:
+      The AHB/AXI peripherals on the PolarFire SoC have reset support, so from
+      CLK_ENVM to CLK_CFM. The reset consumer should specify the desired
+      peripheral via the clock ID in its "resets" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Config node:
+  - |
+    #include <dt-bindings/clock/microchip,mpfs-clock.h>
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            clkcfg: clock-controller@20002000 {
+                compatible = "microchip,mpfs-clkcfg";
+                reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
+                clocks = <&ref>;
+                #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml b/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml
new file mode 100644
index 000000000000..39559a0a598a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,sparx5-dpll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 DPLL Clock
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  The Sparx5 DPLL clock controller generates and supplies clock to
+  various peripherals within the SoC.
+
+properties:
+  compatible:
+    const: microchip,sparx5-dpll
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock provider for eMMC:
+  - |
+    lcpll_clk: lcpll-clk {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <2500000000>;
+    };
+    clks: clock-controller@61110000c {
+        compatible = "microchip,sparx5-dpll";
+        #clock-cells = <1>;
+        clocks = <&lcpll_clk>;
+        reg = <0x1110000c 0x24>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
index f0b804a7f096..6d39344d2b70 100644
--- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
@@ -18,10 +18,12 @@ description: |
 
 properties:
   compatible:
-    oneOf:
-      - items:
-          - enum:
-              - socionext,milbeaut-m10v-ccu
+    enum:
+      - socionext,milbeaut-m10v-ccu
+
+  reg:
+    maxItems: 1
+
   clocks:
     maxItems: 1
     description: external clock
@@ -35,11 +37,13 @@ required:
   - clocks
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Clock controller node:
   - |
     m10v-clk-ctrl@1d021000 {
-        compatible = "socionext,milbeaut-m10v-clk-ccu";
+        compatible = "socionext,milbeaut-m10v-ccu";
         reg = <0x1d021000 0x4000>;
         #clock-cells = <1>;
         clocks = <&clki40mhz>;
diff --git a/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml
new file mode 100644
index 000000000000..a9ad7ab5230c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mstar,msc313-cpupll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/Sigmastar MSC313 CPU PLL
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  The MStar/SigmaStar MSC313 and later ARMv7 chips have a scalable
+  PLL that can be used as the clock source for the CPU(s).
+
+properties:
+  compatible:
+    const: mstar,msc313-cpupll
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mstar-msc313-mpll.h>
+    cpupll: cpupll@206400 {
+        compatible = "mstar,msc313-cpupll";
+        reg = <0x206400 0x200>;
+        #clock-cells = <1>;
+        clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml b/Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml
new file mode 100644
index 000000000000..0df5d75d4ebc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mstar,msc313-mpll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/Sigmastar MSC313 MPLL
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  The MStar/SigmaStar MSC313 and later ARMv7 chips have an MPLL block that
+  takes the external xtal input and multiplies it to create a high
+  frequency clock and divides that down into a number of clocks that
+  peripherals use.
+
+properties:
+  compatible:
+    const: mstar,msc313-mpll
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mpll@206000 {
+        compatible = "mstar,msc313-mpll";
+        reg = <0x206000 0x200>;
+        #clock-cells = <1>;
+        clocks = <&xtal>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
new file mode 100644
index 000000000000..771db2ddf026
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,npcm845-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM8XX Clock Controller Binding
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description: |
+  Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller, which
+  generates and supplies clocks to all modules within the BMC.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm845-clk
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/nuvoton,npcm8xx-clock.h for the full
+      list of NPCM8XX clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ahb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@f0801000 {
+            compatible = "nuvoton,npcm845-clk";
+            reg = <0x0 0xf0801000 0x0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
deleted file mode 100644
index 9acea9d93160..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-NVIDIA Tegra114 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra114-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra114-car.h>.
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock {
-		compatible = "nvidia,tegra114-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA114_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
deleted file mode 100644
index 7f02fb4ca4ad..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-NVIDIA Tegra124 and Tegra132 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in the header files
-  <dt-bindings/clock/tegra124-car-common.h> (which covers IDs common
-  to Tegra124 and Tegra132) and <dt-bindings/clock/tegra124-car.h>
-  (for Tegra124-specific clocks).
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-- nvidia,external-memory-controller : phandle of the EMC driver.
-
-The node should contain a "emc-timings" subnode for each supported RAM type (see
-field RAM_CODE in register PMC_STRAPPING_OPT_A).
-
-Required properties for "emc-timings" nodes :
-- nvidia,ram-code : Should contain the value of RAM_CODE this timing set
-  is used for.
-
-Each "emc-timings" node should contain a "timing" subnode for every supported
-EMC clock rate.
-
-Required properties for "timing" nodes :
-- clock-frequency : Should contain the memory clock rate to which this timing
-relates.
-- nvidia,parent-clock-frequency : Should contain the rate at which the current
-parent of the EMC clock should be running at this timing.
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - emc-parent : the clock that should be the parent of the EMC clock at this
-timing.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock@60006000 {
-		compatible = "nvidia,tegra124-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		nvidia,external-memory-controller = <&emc>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA124_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <112400000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-
-	clock@60006000 {
-		emc-timings-3 {
-			nvidia,ram-code = <3>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-				nvidia,parent-clock-frequency = <408000000>;
-				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
-				clock-names = "emc-parent";
-			};
-			timing-20400000 {
-				clock-frequency = <20400000>;
-				nvidia,parent-clock-frequency = <408000000>;
-				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
-				clock-names = "emc-parent";
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
new file mode 100644
index 000000000000..1b2181f6d440
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nvidia,tegra124-car.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Clock and Reset Controller
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The Clock and Reset (CAR) is the HW module responsible for muxing and gating
+  Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units.
+
+  CLKGEN provides the registers to program the PLLs. It controls most of
+  the clock source programming and most of the clock dividers.
+
+  CLKGEN input signals include the external clock for the reference frequency
+  (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz).
+
+  Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system.
+
+  RSTGEN provides the registers needed to control resetting of each block in
+  the Tegra system.
+
+properties:
+  compatible:
+    const: nvidia,tegra124-car
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  nvidia,external-memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of the external memory controller node
+
+patternProperties:
+  "^emc-timings-[0-9]+$":
+    type: object
+    properties:
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          value of the RAM_CODE field in the PMC_STRAPPING_OPT_A register that
+          this timing set is used for
+
+    patternProperties:
+      "^timing-[0-9]+$":
+        type: object
+        properties:
+          clock-frequency:
+            description:
+              external memory clock rate in Hz
+            minimum: 1000000
+            maximum: 1000000000
+
+          nvidia,parent-clock-frequency:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              rate of parent clock in Hz
+            minimum: 1000000
+            maximum: 1000000000
+
+          clocks:
+            items:
+              - description: parent clock of EMC
+
+          clock-names:
+            items:
+              - const: emc-parent
+
+        required:
+          - clock-frequency
+          - nvidia,parent-clock-frequency
+          - clocks
+          - clock-names
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+
+    car: clock-controller@60006000 {
+        compatible = "nvidia,tegra124-car";
+        reg = <0x60006000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
deleted file mode 100644
index 6c5901b503d0..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-NVIDIA Tegra20 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra20-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra20-car.h>.
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock {
-		compatible = "nvidia,tegra20-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA20_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
new file mode 100644
index 000000000000..bee2dd4b29bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nvidia,tegra20-car.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Clock and Reset Controller
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The Clock and Reset (CAR) is the HW module responsible for muxing and gating
+  Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units.
+
+  CLKGEN provides the registers to program the PLLs. It controls most of
+  the clock source programming and most of the clock dividers.
+
+  CLKGEN input signals include the external clock for the reference frequency
+  (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz).
+
+  Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system.
+
+  RSTGEN provides the registers needed to control resetting of each block in
+  the Tegra system.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-car
+      - nvidia,tegra30-car
+      - nvidia,tegra114-car
+      - nvidia,tegra210-car
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+patternProperties:
+  "^(sclk)|(pll-[cem])$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - nvidia,tegra20-sclk
+          - nvidia,tegra30-sclk
+          - nvidia,tegra30-pllc
+          - nvidia,tegra30-plle
+          - nvidia,tegra30-pllm
+
+      operating-points-v2: true
+
+      clocks:
+        items:
+          - description: node's clock
+
+      power-domains:
+        maxItems: 1
+        description: phandle to the core SoC power domain
+
+    required:
+      - compatible
+      - operating-points-v2
+      - clocks
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    car: clock-controller@60006000 {
+        compatible = "nvidia,tegra20-car";
+        reg = <0x60006000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        sclk {
+            compatible = "nvidia,tegra20-sclk";
+            operating-points-v2 = <&opp_table>;
+            clocks = <&tegra_car TEGRA20_CLK_SCLK>;
+            power-domains = <&domain>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
deleted file mode 100644
index 26f237f641b7..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-NVIDIA Tegra210 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra210-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra210-car.h>.
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock {
-		compatible = "nvidia,tegra210-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA210_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
deleted file mode 100644
index 63618cde12df..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-NVIDIA Tegra30 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra30-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra30-car.h>.
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock {
-		compatible = "nvidia,tegra30-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA30_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/prima2-clock.txt b/Documentation/devicetree/bindings/clock/prima2-clock.txt
deleted file mode 100644
index 5016979c0f78..000000000000
--- a/Documentation/devicetree/bindings/clock/prima2-clock.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-* Clock bindings for CSR SiRFprimaII
-
-Required properties:
-- compatible: Should be "sirf,prima2-clkc"
-- reg: Address and length of the register set
-- interrupts: Should contain clock controller interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of prima2
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	rtc			0
-	osc             	1
-	pll1            	2
-	pll2            	3
-	pll3            	4
-	mem             	5
-	sys             	6
-	security        	7
-	dsp             	8
-	gps             	9
-	mf              	10
-	io              	11
-	cpu             	12
-	uart0           	13
-	uart1           	14
-	uart2           	15
-	tsc             	16
-	i2c0            	17
-	i2c1            	18
-	spi0            	19
-	spi1            	20
-	pwmc            	21
-	efuse           	22
-	pulse           	23
-	dmac0           	24
-	dmac1           	25
-	nand            	26
-	audio           	27
-	usp0            	28
-	usp1            	29
-	usp2            	30
-	vip             	31
-	gfx             	32
-	mm              	33
-	lcd             	34
-	vpp             	35
-	mmc01           	36
-	mmc23           	37
-	mmc45           	38
-	usbpll          	39
-	usb0            	40
-	usb1			41
-
-Examples:
-
-clks: clock-controller@88000000 {
-	compatible = "sirf,prima2-clkc";
-	reg = <0x88000000 0x1000>;
-	interrupts = <3>;
-	#clock-cells = <1>;
-};
-
-i2c0: i2c@b00e0000 {
-	cell-index = <0>;
-	compatible = "sirf,prima2-i2c";
-	reg = <0xb00e0000 0x10000>;
-	interrupts = <24>;
-	clocks = <&clks 17>;
-};
diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.txt b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
deleted file mode 100644
index e3fa8118eaee..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Qualcomm MSM8916 A53 PLL Binding
---------------------------------
-The A53 PLL on MSM8916 platforms is the main CPU PLL used used for frequencies
-above 1GHz.
-
-Required properties :
-- compatible : Shall contain only one of the following:
-
-		"qcom,msm8916-a53pll"
-
-- reg : shall contain base register location and length
-
-- #clock-cells : must be set to <0>
-
-Example:
-
-	a53pll: clock@b016000 {
-		compatible = "qcom,msm8916-a53pll";
-		reg = <0xb016000 0x40>;
-		#clock-cells = <0>;
-	};
-
diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
new file mode 100644
index 000000000000..fe6ca4f68bbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,a53pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm A53 PLL Binding
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  The A53 PLL on few Qualcomm platforms is the main CPU PLL used used for
+  frequencies above 1GHz.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq6018-a53pll
+      - qcom,ipq8074-a53pll
+      - qcom,msm8916-a53pll
+      - qcom,msm8939-a53pll
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    items:
+      - description: board XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  operating-points-v2: true
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  #Example 1 - A53 PLL found on MSM8916 devices
+  - |
+    a53pll: clock@b016000 {
+        compatible = "qcom,msm8916-a53pll";
+        reg = <0xb016000 0x40>;
+        #clock-cells = <0>;
+    };
+  #Example 2 - A53 PLL found on IPQ6018 devices
+  - |
+    a53pll_ipq: clock-controller@b116000 {
+        compatible = "qcom,ipq6018-a53pll";
+        reg = <0x0b116000 0x40>;
+        #clock-cells = <0>;
+        clocks = <&xo>;
+        clock-names = "xo";
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml
new file mode 100644
index 000000000000..0e96f693b050
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,a7pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm A7 PLL Binding
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  The A7 PLL on the Qualcomm platforms like SDX55, SDX65 is used to provide high
+  frequency clock to the CPU.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdx55-a7pll
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    items:
+      - description: board XO clock
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    a7pll: clock@17808000 {
+        compatible = "qcom,sdx55-a7pll";
+        reg = <0x17808000 0x1000>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "bi_tcxo";
+        #clock-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml
new file mode 100644
index 000000000000..c40a74b5d672
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,aoncc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for LPASS Always ON Clock Controller on SM8250 SoCs
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/qcom,sm8250-lpass-aoncc.h for the full list
+  of Audio Clock controller clock IDs.
+
+properties:
+  compatible:
+    const: qcom,sm8250-lpass-aon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: Glitch Free Mux register clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: bus
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    clock-controller@3800000 {
+      #clock-cells = <1>;
+      compatible = "qcom,sm8250-lpass-aon";
+      reg = <0x03380000 0x40000>;
+      clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+      clock-names = "core", "bus";
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml
new file mode 100644
index 000000000000..915d76206ad0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,audiocc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for LPASS Audio Clock Controller on SM8250 SoCs
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/qcom,sm8250-lpass-audiocc.h for the full list
+  of Audio Clock controller clock IDs.
+
+properties:
+  compatible:
+    const: qcom,sm8250-lpass-audiocc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: Glitch Free Mux register clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: bus
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    clock-controller@3300000 {
+      #clock-cells = <1>;
+      compatible = "qcom,sm8250-lpass-audiocc";
+      reg = <0x03300000 0x30000>;
+      clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+      clock-names = "core", "bus";
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
new file mode 100644
index 000000000000..9f239c3960d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,camcc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller Binding for SM8250
+
+maintainers:
+  - Jonathan Marek <jonathan@marek.ca>
+
+description: |
+  Qualcomm camera clock control module which supports the clocks, resets and
+  power domains on SM8250.
+
+  See also dt-bindings/clock/qcom,camcc-sm8250.h
+
+properties:
+  compatible:
+    const: qcom,sm8250-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sm8250-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc.txt b/Documentation/devicetree/bindings/clock/qcom,camcc.txt
deleted file mode 100644
index c5eb6694fda9..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,camcc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Qualcomm Camera Clock & Reset Controller Binding
-------------------------------------------------
-
-Required properties :
-- compatible : shall contain "qcom,sdm845-camcc".
-- reg : shall contain base register location and length.
-- #clock-cells : from common clock binding, shall contain 1.
-- #reset-cells : from common reset binding, shall contain 1.
-- #power-domain-cells : from generic power domain binding, shall contain 1.
-
-Example:
-	camcc: clock-controller@ad00000 {
-		compatible = "qcom,sdm845-camcc";
-		reg = <0xad00000 0x10000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		#power-domain-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
new file mode 100644
index 000000000000..7a03ef19c947
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6125.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller Binding for SM6125
+
+maintainers:
+  - Martin Botka <martin.botka@somainline.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks and
+  power domains on SM6125.
+
+  See also:
+    dt-bindings/clock/qcom,dispcc-sm6125.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6125-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+      - description: AHB config clock from GCC
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+      - const: cfg_ahb_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6125-dispcc";
+      reg = <0x5f00000 0x20000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>,
+               <&gcc GCC_DISP_AHB_CLK>;
+      clock-names = "bi_tcxo",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk",
+                    "cfg_ahb_clk";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml
new file mode 100644
index 000000000000..e706678b353a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for SM6350
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on SM6350.
+
+  See also dt-bindings/clock/qcom,dispcc-sm6350.h.
+
+properties:
+  compatible:
+    const: qcom,sm6350-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm6350-dispcc";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
new file mode 100644
index 000000000000..7a8d375e055e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250/SM8350
+
+maintainers:
+  - Jonathan Marek <jonathan@marek.ca>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on SM8150/SM8250/SM8350.
+
+  See also:
+    dt-bindings/clock/qcom,dispcc-sm8150.h
+    dt-bindings/clock/qcom,dispcc-sm8250.h
+    dt-bindings/clock/qcom,dispcc-sm8350.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8180x-dispcc
+      - qcom,sm8150-dispcc
+      - qcom,sm8250-dispcc
+      - qcom,sm8350-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_byteclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8250-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_byteclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd SM8250_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index 3647007f82ca..6b4efd64c154 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -4,7 +4,10 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-apq8064.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for APQ8064
+title: Qualcomm Global Clock & Reset Controller Binding for APQ8064/MSM8960
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
@@ -20,23 +23,34 @@ description: |
 
 properties:
   compatible:
-    const: qcom,gcc-apq8064
+    oneOf:
+      - items:
+          - enum:
+              - qcom,gcc-apq8064
+              - qcom,gcc-msm8960
+          - const: syscon
+      - enum:
+          - qcom,gcc-apq8064
+          - qcom,gcc-msm8960
+        deprecated: true
 
-  '#clock-cells':
-    const: 1
+  thermal-sensor:
+    description: child tsens device
+    $ref: /schemas/thermal/qcom-tsens.yaml#
 
-  '#reset-cells':
-    const: 1
+  clocks:
+    maxItems: 3
 
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
+  clock-names:
+    items:
+      - const: cxo
+      - const: pxo
+      - const: pll4
 
   nvmem-cells:
     minItems: 1
     maxItems: 2
+    deprecated: true
     description:
       Qualcomm TSENS (thermal sensor device) on some devices can
       be part of GCC and hence the TSENS properties can also be part
@@ -46,38 +60,39 @@ properties:
 
   nvmem-cell-names:
     minItems: 1
-    maxItems: 2
+    deprecated: true
     items:
       - const: calib
       - const: calib_backup
 
   '#thermal-sensor-cells':
     const: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+    deprecated: true
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-  - nvmem-cells
-  - nvmem-cell-names
-  - '#thermal-sensor-cells'
+
+unevaluatedProperties: false
 
 examples:
   - |
     clock-controller@900000 {
-      compatible = "qcom,gcc-apq8064";
+      compatible = "qcom,gcc-apq8064", "syscon";
       reg = <0x00900000 0x4000>;
-      nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-      nvmem-cell-names = "calib", "calib_backup";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      #thermal-sensor-cells = <1>;
+
+      thermal-sensor {
+        compatible = "qcom,msm8960-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <0 178 4>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
new file mode 100644
index 000000000000..397fb918e032
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8084.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for APQ8084
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on APQ8084.
+
+  See also::
+  - dt-bindings/clock/qcom,gcc-apq8084.h
+  - dt-bindings/reset/qcom,gcc-apq8084.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-apq8084
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@fc400000 {
+        compatible = "qcom,gcc-apq8084";
+        reg = <0xfc400000 0x4000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
new file mode 100644
index 000000000000..9eb91dd22557
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for IPQ8064
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on IPQ8064.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+  - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+
+properties:
+  compatible:
+    items:
+      - const: qcom,gcc-ipq8064
+      - const: syscon
+
+  clocks:
+    items:
+      - description: PXO source
+      - description: CXO source
+
+  clock-names:
+    items:
+      - const: pxo
+      - const: cxo
+
+  thermal-sensor:
+    type: object
+
+    allOf:
+      - $ref: /schemas/thermal/qcom-tsens.yaml#
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gcc: clock-controller@900000 {
+      compatible = "qcom,gcc-ipq8064", "syscon";
+      reg = <0x00900000 0x4000>;
+      clocks = <&pxo_board>, <&cxo_board>;
+      clock-names = "pxo", "cxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+
+      tsens: thermal-sensor {
+        compatible = "qcom,ipq8064-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
index 89c6e070e7ac..21470f52ce36 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
@@ -24,6 +24,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#power-domain-cells':
+    const: 1
+
   '#reset-cells':
     const: 1
 
@@ -38,14 +41,18 @@ required:
   - compatible
   - reg
   - '#clock-cells'
+  - '#power-domain-cells'
   - '#reset-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@1800000 {
       compatible = "qcom,gcc-ipq8074";
       reg = <0x01800000 0x80000>;
       #clock-cells = <1>;
+      #power-domain-cells = <1>;
       #reset-cells = <1>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml
new file mode 100644
index 000000000000..09b2ea60d356
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8660
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks and resets on
+  MSM8660
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8660.h
+  - dt-bindings/reset/qcom,gcc-msm8660.h
+
+allOf:
+  - $ref: "qcom,gcc.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8660
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pxo
+      - const: cxo
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for MSM8974:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-msm8660";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&pxo_board>, <&cxo_board>;
+      clock-names = "pxo", "cxo";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml
new file mode 100644
index 000000000000..2272ea5f78d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8909.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8909
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8909.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8909.h
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8909
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gcc: clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8909";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&xo_board>, <&sleep_clk>, <&dsi0_phy 1>, <&dsi0_phy 0>;
+      clock-names = "xo", "sleep_clk", "dsi0pll", "dsi0pllbyte";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml
new file mode 100644
index 000000000000..2ceb1e501ef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8916 and MSM8939
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8916 or MSM8939.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8916.h
+  - dt-bindings/clock/qcom,gcc-msm8939.h
+  - dt-bindings/reset/qcom,gcc-msm8916.h
+  - dt-bindings/reset/qcom,gcc-msm8939.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8916
+      - qcom,gcc-msm8939
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: External MCLK clock
+      - description: External Primary I2S clock
+      - description: External Secondary I2S clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: ext_mclk
+      - const: ext_pri_i2s
+      - const: ext_sec_i2s
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8916";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x300000 0x90000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml
new file mode 100644
index 000000000000..4b7d69518371
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8976.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8976
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8976.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8976.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8976
+      - qcom,gcc-msm8976-v1.1
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Always-on XO source
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Byte clock from DSI PHY1
+
+  clock-names:
+    items:
+      - const: xo
+      - const: xo_a
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: dsi1pll
+      - const: dsi1pllbyte
+
+  vdd_gfx-supply:
+    description:
+      Phandle to voltage regulator providing power to the GX domain.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - vdd_gfx-supply
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8976";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x1800000 0x80000>;
+
+      clocks = <&xo_board>,
+               <&xo_board>,
+               <&dsi0_phy 1>,
+               <&dsi0_phy 0>,
+               <&dsi1_phy 1>,
+               <&dsi1_phy 0>;
+
+      clock-names = "xo",
+                    "xo_a",
+                    "dsi0pll",
+                    "dsi0pllbyte",
+                    "dsi1pll",
+                    "dsi1pllbyte";
+
+      vdd_gfx-supply = <&pm8004_s5>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
new file mode 100644
index 000000000000..7b9fef6d9b23
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8994.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8994
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8994 and MSM8992.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8994.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8992
+      - qcom,gcc-msm8994
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8994";
+      reg = <0x00300000 0x90000>;
+      clocks = <&xo_board>, <&sleep_clk>;
+      clock-names = "xo", "sleep";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
index 18e4e77b8cfa..dfc5165db9f1 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -22,39 +22,40 @@ properties:
     const: qcom,gcc-msm8996
 
   clocks:
+    minItems: 3
     items:
       - description: XO source
       - description: Second XO source
       - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: PCIe 1 PIPE clock (optional)
+      - description: PCIe 2 PIPE clock (optional)
+      - description: USB3 PIPE clock (optional)
+      - description: UFS RX symbol 0 clock (optional)
+      - description: UFS RX symbol 1 clock (optional)
+      - description: UFS TX symbol 0 clock (optional)
 
   clock-names:
+    minItems: 3
     items:
       - const: cxo
       - const: cxo2
       - const: sleep_clk
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+      - const: pcie_0_pipe_clk_src
+      - const: pcie_1_pipe_clk_src
+      - const: pcie_2_pipe_clk_src
+      - const: usb3_phy_pipe_clk_src
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
index 1d3cae980471..544a2335cf05 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
@@ -25,46 +25,27 @@ properties:
     items:
       - description: Board XO source
       - description: Sleep clock source
-      - description: USB 3.0 phy pipe clock
-      - description: UFS phy rx symbol clock for pipe 0
-      - description: UFS phy rx symbol clock for pipe 1
-      - description: UFS phy tx symbol clock
-      - description: PCIE phy pipe clock
+      - description: Audio reference clock (Optional clock)
+      - description: PLL test clock source (Optional clock)
+    minItems: 2
 
   clock-names:
     items:
       - const: xo
       - const: sleep_clk
-      - const: usb3_pipe
-      - const: ufs_rx_symbol0
-      - const: ufs_rx_symbol1
-      - const: ufs_tx_symbol0
-      - const: pcie0_pipe
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+      - const: aud_ref_clk # Optional clock
+      - const: core_bi_pll_test_se # Optional clock
+    minItems: 2
 
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -78,16 +59,10 @@ examples:
       clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
                <&sleep>,
                <0>,
-               <0>,
-               <0>,
-               <0>,
                <0>;
       clock-names = "xo",
                     "sleep_clk",
-                    "usb3_pipe",
-                    "ufs_rx_symbol0",
-                    "ufs_rx_symbol1",
-                    "ufs_tx_symbol0",
-                    "pcie0_pipe";
+                    "aud_ref_clk",
+                    "core_bi_pll_test_se";
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
new file mode 100644
index 000000000000..76988e04c7db
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-other.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-ipq4019.h
+  - dt-bindings/clock/qcom,gcc-ipq6018.h
+  - dt-bindings/reset/qcom,gcc-ipq6018.h
+  - dt-bindings/clock/qcom,gcc-msm8953.h
+  - dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+  - dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+  - dt-bindings/clock/qcom,gcc-mdm9607.h
+  - dt-bindings/clock/qcom,gcc-mdm9615.h
+  - dt-bindings/reset/qcom,gcc-mdm9615.h
+  - dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+
+allOf:
+  - $ref: "qcom,gcc.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-ipq4019
+      - qcom,gcc-ipq6018
+      - qcom,gcc-mdm9607
+      - qcom,gcc-msm8226
+      - qcom,gcc-msm8953
+      - qcom,gcc-msm8974
+      - qcom,gcc-msm8974pro
+      - qcom,gcc-msm8974pro-ac
+      - qcom,gcc-mdm9615
+      - qcom,gcc-sdm630
+      - qcom,gcc-sdm660
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for MSM8974:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-msm8974";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml
new file mode 100644
index 000000000000..aec37e3f5e30
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-qcm2290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for QCM2290
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets
+  and power domains on QCM2290.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-qcm2290.h
+
+properties:
+  compatible:
+    const: qcom,gcc-qcm2290
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+        compatible = "qcom,gcc-qcm2290";
+        reg = <0x01400000 0x1f0000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+        clock-names = "bi_tcxo", "sleep_clk";
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
index 8cdece395eba..ce06f3f8c3e3 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
@@ -40,6 +40,8 @@ required:
   - '#clock-cells'
   - '#reset-cells'
 
+additionalProperties: false
+
 examples:
   - |
     clock-controller@1800000 {
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
index ee4f968e2909..e4d490e65d14 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -33,37 +33,22 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@100000 {
       compatible = "qcom,gcc-sc7180";
-      reg = <0 0x00100000 0 0x1f0000>;
+      reg = <0x00100000 0x1f0000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
new file mode 100644
index 000000000000..ea61367e5abc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc7280.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SC7280
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SC7280.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sc7280.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc7280
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+      - description: PCIE-0 pipe clock source
+      - description: PCIE-1 pipe clock source
+      - description: USF phy rx symbol 0 clock source
+      - description: USF phy rx symbol 1 clock source
+      - description: USF phy tx symbol 0 clock source
+      - description: USB30 phy wrapper pipe clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk
+      - const: pcie_1_pipe_clk
+      - const: ufs_phy_rx_symbol_0_clk
+      - const: ufs_phy_rx_symbol_1_clk
+      - const: ufs_phy_tx_symbol_0_clk
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc7280";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>,
+               <&pcie_0_pipe_clk>, <&pcie_1_pipe_clk>,
+               <&ufs_phy_rx_symbol_0_clk>, <&ufs_phy_rx_symbol_1_clk>,
+               <&ufs_phy_tx_symbol_0_clk>,
+               <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
+
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk",
+                     "pcie_1_pipe_clk", "ufs_phy_rx_symbol_0_clk",
+                     "ufs_phy_rx_symbol_1_clk", "ufs_phy_tx_symbol_0_clk",
+                     "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
new file mode 100644
index 000000000000..30b5d1215fa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8180x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SC8180x
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SC8180x.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sc8180x.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc8180x
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc8180x";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
new file mode 100644
index 000000000000..b1bf768530a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SC8280xp
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SC8280xp.
+
+  See also:
+  - include/dt-bindings/clock/qcom,gcc-sc8280xp.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc8280xp
+
+  clocks:
+    items:
+      - description: XO reference clock
+      - description: Sleep clock
+      - description: UFS memory first RX symbol clock
+      - description: UFS memory second RX symbol clock
+      - description: UFS memory first TX symbol clock
+      - description: UFS card first RX symbol clock
+      - description: UFS card second RX symbol clock
+      - description: UFS card first TX symbol clock
+      - description: Primary USB SuperSpeed pipe clock
+      - description: USB4 PHY pipegmux clock source
+      - description: USB4 PHY DP gmux clock source
+      - description: USB4 PHY sys pipegmux clock source
+      - description: USB4 PHY PCIe pipe clock
+      - description: USB4 PHY router max pipe clock
+      - description: Primary USB4 RX0 clock
+      - description: Primary USB4 RX1 clock
+      - description: Secondary USB SuperSpeed pipe clock
+      - description: Second USB4 PHY pipegmux clock source
+      - description: Second USB4 PHY DP gmux clock source
+      - description: Second USB4 PHY sys pipegmux clock source
+      - description: Second USB4 PHY PCIe pipe clock
+      - description: Second USB4 PHY router max pipe clock
+      - description: Secondary USB4 RX0 clock
+      - description: Secondary USB4 RX1 clock
+      - description: Multiport USB first SuperSpeed pipe clock
+      - description: Multiport USB second SuperSpeed pipe clock
+      - description: PCIe 2a pipe clock
+      - description: PCIe 2b pipe clock
+      - description: PCIe 3a pipe clock
+      - description: PCIe 3b pipe clock
+      - description: PCIe 4 pipe clock
+      - description: First EMAC controller reference clock
+      - description: Second EMAC controller reference clock
+
+  protected-clocks:
+    maxItems: 389
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc8280xp";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&ufs_phy_rx_symbol_0_clk>,
+               <&ufs_phy_rx_symbol_1_clk>,
+               <&ufs_phy_tx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_1_clk>,
+               <&ufs_card_tx_symbol_0_clk>,
+               <&usb_0_ssphy>,
+               <&gcc_usb4_phy_pipegmux_clk_src>,
+               <&gcc_usb4_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_phy_sys_pipegmux_clk_src>,
+               <&usb4_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_gcc_usb4_rx0_clk>,
+               <&qusb4phy_gcc_usb4_rx1_clk>,
+               <&usb_1_ssphy>,
+               <&gcc_usb4_1_phy_pipegmux_clk_src>,
+               <&gcc_usb4_1_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_1_phy_sys_pipegmux_clk_src>,
+               <&usb4_1_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_1_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_1_gcc_usb4_rx0_clk>,
+               <&qusb4phy_1_gcc_usb4_rx1_clk>,
+               <&usb_2_ssphy>,
+               <&usb_3_ssphy>,
+               <&pcie2a_lane>,
+               <&pcie2b_lane>,
+               <&pcie3a_lane>,
+               <&pcie3b_lane>,
+               <&pcie4_lane>,
+               <&rxc0_ref_clk>,
+               <&rxc1_ref_clk>;
+
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
new file mode 100644
index 000000000000..e169d46c78f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdm845.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SDM845
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sdm845.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-sdm670
+      - qcom,gcc-sdm845
+
+  clocks:
+    minItems: 3
+    maxItems: 5
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm670
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm845
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+            - description: PCIE 0 Pipe clock source
+            - description: PCIE 1 Pipe clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+            - const: pcie_0_pipe_clk
+            - const: pcie_1_pipe_clk
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for SDM845:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdm845";
+      reg = <0x100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>,
+               <&pcie0_lane>,
+               <&pcie1_lane>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
new file mode 100644
index 000000000000..13ffa16e0833
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx55.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SDX55
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SDX55
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sdx55.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sdx55
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PLL test clock source (Optional clock)
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+      - const: core_bi_pll_test_se # Optional clock
+    minItems: 2
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdx55";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>, <&pll_test_clk>;
+      clock-names = "bi_tcxo", "sleep_clk", "core_bi_pll_test_se";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
new file mode 100644
index 000000000000..8a1419c4d465
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx65.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SDX65
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SDX65
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sdx65.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sdx65
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+      - description: PCIE Pipe clock source
+      - description: USB3 phy wrapper pipe clock source
+      - description: PLL test clock source (Optional clock)
+    minItems: 5
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+      - const: pcie_pipe_clk
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
+      - const: core_bi_pll_test_se # Optional clock
+    minItems: 5
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdx65";
+      reg = <0x100000 0x1f7400>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
+               <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>, <&pll_test_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
+                    "pcie_pipe_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk", "core_bi_pll_test_se";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml
new file mode 100644
index 000000000000..bb81a27a1b16
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM6115 and SM4250
+
+maintainers:
+  - Iskren Chernev <iskren.chernev@gmail.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SM4250/6115.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sm6115.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm6115
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+        compatible = "qcom,gcc-sm6115";
+        reg = <0x01400000 0x1f0000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+        clock-names = "bi_tcxo", "sleep_clk";
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml
new file mode 100644
index 000000000000..03e84e15815c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6125.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM6125
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SM6125.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sm6125.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm6125
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+        compatible = "qcom,gcc-sm6125";
+        reg = <0x01400000 0x1f0000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+        clock-names = "bi_tcxo", "sleep_clk";
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml
new file mode 100644
index 000000000000..cbe98c01c085
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM6350
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SM6350.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sm6350.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm6350
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm6350";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
index 888e9a708390..0333ccb07d8d 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
@@ -31,37 +31,22 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@100000 {
       compatible = "qcom,gcc-sm8150";
-      reg = <0 0x00100000 0 0x1f0000>;
+      reg = <0x00100000 0x1f0000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&sleep_clk>;
       clock-names = "bi_tcxo", "sleep_clk";
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
new file mode 100644
index 000000000000..4e2a9cac0a91
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM8250
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SM8250.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sm8250.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8250
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8250";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
new file mode 100644
index 000000000000..3edbeca70a9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM8350
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SM8350.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sm8350.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8350
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PLL test clock source (Optional clock)
+      - description: PCIE 0 Pipe clock source (Optional clock)
+      - description: PCIE 1 Pipe clock source (Optional clock)
+      - description: UFS card Rx symbol 0 clock source (Optional clock)
+      - description: UFS card Rx symbol 1 clock source (Optional clock)
+      - description: UFS card Tx symbol 0 clock source (Optional clock)
+      - description: UFS phy Rx symbol 0 clock source (Optional clock)
+      - description: UFS phy Rx symbol 1 clock source (Optional clock)
+      - description: UFS phy Tx symbol 0 clock source (Optional clock)
+      - description: USB3 phy wrapper pipe clock source (Optional clock)
+      - description: USB3 phy sec pipe clock source (Optional clock)
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+      - const: core_bi_pll_test_se # Optional clock
+      - const: pcie_0_pipe_clk # Optional clock
+      - const: pcie_1_pipe_clk # Optional clock
+      - const: ufs_card_rx_symbol_0_clk # Optional clock
+      - const: ufs_card_rx_symbol_1_clk # Optional clock
+      - const: ufs_card_tx_symbol_0_clk # Optional clock
+      - const: ufs_phy_rx_symbol_0_clk # Optional clock
+      - const: ufs_phy_rx_symbol_1_clk # Optional clock
+      - const: ufs_phy_tx_symbol_0_clk # Optional clock
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
+      - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock
+    minItems: 2
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8350";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml
new file mode 100644
index 000000000000..102ce6862e24
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8450.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM8450
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SM8450
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sm8450.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8450
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source (Optional clock)
+      - description: PCIE 1 Pipe clock source (Optional clock)
+      - description: PCIE 1 Phy Auxillary clock source (Optional clock)
+      - description: UFS Phy Rx symbol 0 clock source (Optional clock)
+      - description: UFS Phy Rx symbol 1 clock source (Optional clock)
+      - description: UFS Phy Tx symbol 0 clock source (Optional clock)
+      - description: USB3 Phy wrapper pipe clock source (Optional clock)
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk # Optional clock
+      - const: pcie_1_pipe_clk # Optional clock
+      - const: pcie_1_phy_aux_clk # Optional clock
+      - const: ufs_phy_rx_symbol_0_clk # Optional clock
+      - const: ufs_phy_rx_symbol_1_clk # Optional clock
+      - const: ufs_phy_tx_symbol_0_clk # Optional clock
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
+    minItems: 2
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8450";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index d18f8ab9eeee..2ed27a2ef445 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -4,53 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding
+title: Qualcomm Global Clock & Reset Controller Binding Common Bindings
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains.
-
-  See also:
-  - dt-bindings/clock/qcom,gcc-apq8084.h
-  - dt-bindings/reset/qcom,gcc-apq8084.h
-  - dt-bindings/clock/qcom,gcc-ipq4019.h
-  - dt-bindings/clock/qcom,gcc-ipq6018.h
-  - dt-bindings/reset/qcom,gcc-ipq6018.h
-  - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
-  - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
-  - dt-bindings/clock/qcom,gcc-msm8660.h
-  - dt-bindings/reset/qcom,gcc-msm8660.h
-  - dt-bindings/clock/qcom,gcc-msm8974.h
-  - dt-bindings/reset/qcom,gcc-msm8974.h
-  - dt-bindings/clock/qcom,gcc-msm8994.h
-  - dt-bindings/clock/qcom,gcc-mdm9615.h
-  - dt-bindings/reset/qcom,gcc-mdm9615.h
-  - dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
-  - dt-bindings/clock/qcom,gcc-sdm845.h
+  Common bindings for Qualcomm global clock control module which supports
+  the clocks, resets and power domains.
 
 properties:
-  compatible:
-    enum:
-      - qcom,gcc-apq8084
-      - qcom,gcc-ipq4019
-      - qcom,gcc-ipq6018
-      - qcom,gcc-ipq8064
-      - qcom,gcc-msm8660
-      - qcom,gcc-msm8916
-      - qcom,gcc-msm8960
-      - qcom,gcc-msm8974
-      - qcom,gcc-msm8974pro
-      - qcom,gcc-msm8974pro-ac
-      - qcom,gcc-msm8994
-      - qcom,gcc-mdm9615
-      - qcom,gcc-sdm630
-      - qcom,gcc-sdm660
-      - qcom,gcc-sdm845
-
   '#clock-cells':
     const: 1
 
@@ -68,20 +32,11 @@ properties:
       Protected clock specifier list as per common clock binding.
 
 required:
-  - compatible
   - reg
   - '#clock-cells'
   - '#reset-cells'
   - '#power-domain-cells'
 
-examples:
-  # Example for GCC for MSM8960:
-  - |
-    clock-controller@900000 {
-      compatible = "qcom,gcc-msm8960";
-      reg = <0x900000 0x4000>;
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml
new file mode 100644
index 000000000000..3f70eb59aae3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gpucc-sdm660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller Binding for SDM630 and SDM660
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  Qualcomm graphics clock control module which supports the clocks, resets and
+  power domains on SDM630 and SDM660.
+
+  See also dt-bindings/clock/qcom,gpucc-sdm660.h.
+
+properties:
+  compatible:
+    enum:
+      - qcom,gpucc-sdm630
+      - qcom,gpucc-sdm660
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main gpu branch
+      - description: GPLL0 divider gpu branch
+
+  clock-names:
+    items:
+      - const: xo
+      - const: gcc_gpu_gpll0_clk
+      - const: gcc_gpu_gpll0_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm660.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    clock-controller@5065000 {
+      compatible = "qcom,gpucc-sdm660";
+      reg = <0x05065000 0x9038>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&gcc GCC_GPU_GPLL0_CLK>,
+               <&gcc GCC_GPU_GPLL0_DIV_CLK>;
+      clock-names = "xo", "gcc_gpu_gpll0_clk",
+                    "gcc_gpu_gpll0_div_clk";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
new file mode 100644
index 000000000000..0a0546c079a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gpucc-sm8350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller Binding
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module which supports the clocks, resets and
+  power domains on Qualcomm SoCs.
+
+  See also:
+    dt-bindings/clock/qcom,gpucc-sm8350.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8350-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@3d90000 {
+            compatible = "qcom,sm8350-gpucc";
+            reg = <0 0x03d90000 0 0x9000>;
+            clocks = <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
new file mode 100644
index 000000000000..a7d0af1bd9e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller Binding
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm graphics clock control module which supports the clocks, resets and
+  power domains on Qualcomm SoCs.
+
+  See also:
+    dt-bindings/clock/qcom,gpucc-sdm845.h
+    dt-bindings/clock/qcom,gpucc-sc7180.h
+    dt-bindings/clock/qcom,gpucc-sc7280.h
+    dt-bindings/clock/qcom,gpucc-sc8280xp.h
+    dt-bindings/clock/qcom,gpucc-sm6350.h
+    dt-bindings/clock/qcom,gpucc-sm8150.h
+    dt-bindings/clock/qcom,gpucc-sm8250.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdm845-gpucc
+      - qcom,sc7180-gpucc
+      - qcom,sc7280-gpucc
+      - qcom,sc8180x-gpucc
+      - qcom,sc8280xp-gpucc
+      - qcom,sm6350-gpucc
+      - qcom,sm8150-gpucc
+      - qcom,sm8250-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_gpu_gpll0_clk_src
+      - const: gcc_gpu_gpll0_div_clk_src
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@5090000 {
+      compatible = "qcom,sdm845-gpucc";
+      reg = <0x05090000 0x9000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+               <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+      clock-names = "bi_tcxo",
+                    "gcc_gpu_gpll0_clk_src",
+                    "gcc_gpu_gpll0_div_clk_src";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index 85518494ce43..03faab5b6a41 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Multimedia Clock & Reset Controller Binding
 
 maintainers:
-  - Jeffrey Hugo <jhugo@codeaurora.org>
+  - Jeffrey Hugo <quic_jhugo@quicinc.com>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
@@ -15,41 +15,28 @@ description: |
   power domains.
 
 properties:
-  compatible :
+  compatible:
     enum:
-       - qcom,mmcc-apq8064
-       - qcom,mmcc-apq8084
-       - qcom,mmcc-msm8660
-       - qcom,mmcc-msm8960
-       - qcom,mmcc-msm8974
-       - qcom,mmcc-msm8996
-       - qcom,mmcc-msm8998
+      - qcom,mmcc-apq8064
+      - qcom,mmcc-apq8084
+      - qcom,mmcc-msm8226
+      - qcom,mmcc-msm8660
+      - qcom,mmcc-msm8960
+      - qcom,mmcc-msm8974
+      - qcom,mmcc-msm8992
+      - qcom,mmcc-msm8994
+      - qcom,mmcc-msm8996
+      - qcom,mmcc-msm8998
+      - qcom,mmcc-sdm630
+      - qcom,mmcc-sdm660
 
   clocks:
-    items:
-      - description: Board XO source
-      - description: Board sleep source
-      - description: Global PLL 0 clock
-      - description: DSI phy instance 0 dsi clock
-      - description: DSI phy instance 0 byte clock
-      - description: DSI phy instance 1 dsi clock
-      - description: DSI phy instance 1 byte clock
-      - description: HDMI phy PLL clock
-      - description: DisplayPort phy PLL vco clock
-      - description: DisplayPort phy PLL link clock
+    minItems: 8
+    maxItems: 10
 
   clock-names:
-    items:
-      - const: xo
-      - const: sleep
-      - const: gpll0
-      - const: dsi0dsi
-      - const: dsi0byte
-      - const: dsi1dsi
-      - const: dsi1byte
-      - const: hdmipll
-      - const: dpvco
-      - const: dplink
+    minItems: 8
+    maxItems: 10
 
   '#clock-cells':
     const: 1
@@ -65,7 +52,11 @@ properties:
 
   protected-clocks:
     description:
-       Protected clock specifier list as per common clock binding
+      Protected clock specifier list as per common clock binding
+
+  vdd-gfx-supply:
+    description:
+      Regulator supply for the GPU_GX GDSC
 
 required:
   - compatible
@@ -74,16 +65,181 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: qcom,mmcc-msm8998
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-apq8064
+              - qcom,mmcc-msm8960
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board PXO source
+            - description: PLL 3 clock
+            - description: PLL 3 Vote clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DSI phy instance 2 dsi clock
+            - description: DSI phy instance 2 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: pll3
+            - const: pll8_vote
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dsi2pll
+            - const: dsi2pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8994
+              - qcom,mmcc-msm8998
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8994
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: GFX3D clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: mmssnoc_ahb
+            - const: oxili_gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8996
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: gcc_mmss_noc_cfg_ahb_clk
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8998
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
+            - description: Test clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: dsi0dsi
+            - const: dsi0byte
+            - const: dsi1dsi
+            - const: dsi1byte
+            - const: hdmipll
+            - const: dplink
+            - const: dpvco
+            - const: core_bi_pll_test_se
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board sleep source
+            - description: Global PLL 0 clock
+            - description: Global PLL 0 DIV clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
 
-then:
-  required:
-    - clocks
-    - clock-names
+        clock-names:
+          items:
+            - const: xo
+            - const: sleep_clk
+            - const: gpll0
+            - const: gpll0_div
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dp_link_2x_clk_divsel_five
+            - const: dp_vco_divided_clk_src_mux
 
 examples:
   # Example for MMCC for MSM8960:
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
new file mode 100644
index 000000000000..c4971234fef8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,msm8996-apcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm clock controller for MSM8996 CPUs
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+  Qualcomm CPU clock controller for MSM8996 CPUs, clock 0 is for Power cluster
+  and clock 1 is for Perf cluster.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8996-apcc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XO source
+
+  clock-names:
+    items:
+      - const: xo
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    kryocc: clock-controller@6400000 {
+        compatible = "qcom,msm8996-apcc";
+        reg = <0x6400000 0x90000>;
+        #clock-cells = <1>;
+
+        clocks = <&xo_board>;
+        clock-names = "xo";
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
index 7d853c1a85e5..d747bb58f0a7 100644
--- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
@@ -50,6 +50,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-msm8998.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml
new file mode 100644
index 000000000000..973e408c6268
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcm2290-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for qcm2290
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on qcm2290.
+
+  See also dt-bindings/clock/qcom,dispcc-qcm2290.h.
+
+properties:
+  compatible:
+    const: qcom,qcm2290-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active-only XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL0 div source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: gcc_disp_gpll0_clk_src
+      - const: gcc_disp_gpll0_div_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@5f00000 {
+            compatible = "qcom,qcm2290-dispcc";
+            reg = <0x5f00000 0x20000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+                     <&dsi0_phy 0>,
+                     <&dsi0_phy 1>;
+            clock-names = "bi_tcxo",
+                          "bi_tcxo_ao",
+                          "gcc_disp_gpll0_clk_src",
+                          "gcc_disp_gpll0_div_clk_src",
+                          "dsi0_phy_pll_out_byteclk",
+                          "dsi0_phy_pll_out_dsiclk";
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
deleted file mode 100644
index 944719bd586f..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Qualcomm RPM Clock Controller Binding
-------------------------------------------------
-The RPM is a dedicated hardware engine for managing the shared
-SoC resources in order to keep the lowest power profile. It
-communicates with other hardware subsystems via shared memory
-and accepts clock requests, aggregates the requests and turns
-the clocks on/off or scales them on demand.
-
-Required properties :
-- compatible : shall contain only one of the following. The generic
-               compatible "qcom,rpmcc" should be also included.
-
-			"qcom,rpmcc-msm8660", "qcom,rpmcc"
-			"qcom,rpmcc-apq8060", "qcom,rpmcc"
-			"qcom,rpmcc-msm8916", "qcom,rpmcc"
-			"qcom,rpmcc-msm8974", "qcom,rpmcc"
-			"qcom,rpmcc-apq8064", "qcom,rpmcc"
-			"qcom,rpmcc-msm8996", "qcom,rpmcc"
-			"qcom,rpmcc-msm8998", "qcom,rpmcc"
-			"qcom,rpmcc-qcs404", "qcom,rpmcc"
-
-- #clock-cells : shall contain 1
-
-The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h>
-and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock
-is an "active" clock, which means that the consumer only care that the
-clock is available when the apps CPU subsystem is active, i.e. not
-suspended or in deep idle. If it is important that the clock keeps running
-during system suspend, you need to specify the non-active clock, the one
-not containing *_A_* in the enumerator name.
-
-Example:
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8916";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
-					#clock-cells = <1>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
new file mode 100644
index 000000000000..2a95bf8664f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,rpmcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM Clock Controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> and
+  come in pairs:: FOO_CLK followed by FOO_A_CLK. The latter clock is
+  an "active" clock, which means that the consumer only care that the clock is
+  available when the apps CPU subsystem is active, i.e. not suspended or in
+  deep idle. If it is important that the clock keeps running during system
+  suspend, you need to specify the non-active clock, the one not containing
+  *_A_* in the enumerator name.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,rpmcc-apq8060
+          - qcom,rpmcc-apq8064
+          - qcom,rpmcc-ipq806x
+          - qcom,rpmcc-mdm9607
+          - qcom,rpmcc-msm8226
+          - qcom,rpmcc-msm8660
+          - qcom,rpmcc-msm8909
+          - qcom,rpmcc-msm8916
+          - qcom,rpmcc-msm8936
+          - qcom,rpmcc-msm8953
+          - qcom,rpmcc-msm8974
+          - qcom,rpmcc-msm8976
+          - qcom,rpmcc-msm8992
+          - qcom,rpmcc-msm8994
+          - qcom,rpmcc-msm8996
+          - qcom,rpmcc-msm8998
+          - qcom,rpmcc-qcm2290
+          - qcom,rpmcc-qcs404
+          - qcom,rpmcc-sdm660
+          - qcom,rpmcc-sm6115
+          - qcom,rpmcc-sm6125
+          - qcom,rpmcc-sm6375
+      - const: qcom,rpmcc
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-apq8060
+              - qcom,rpmcc-ipq806x
+              - qcom,rpmcc-msm8660
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,rpmcc-apq8064
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+            - description: cxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: cxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-mdm9607
+              - qcom,rpmcc-msm8226
+              - qcom,rpmcc-msm8916
+              - qcom,rpmcc-msm8936
+              - qcom,rpmcc-msm8953
+              - qcom,rpmcc-msm8974
+              - qcom,rpmcc-msm8976
+              - qcom,rpmcc-msm8992
+              - qcom,rpmcc-msm8994
+              - qcom,rpmcc-msm8996
+              - qcom,rpmcc-msm8998
+              - qcom,rpmcc-qcm2290
+              - qcom,rpmcc-qcs404
+              - qcom,rpmcc-sdm660
+              - qcom,rpmcc-sm6115
+              - qcom,rpmcc-sm6125
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: xo clock
+
+        clock-names:
+          items:
+            - const: xo
+
+additionalProperties: false
+
+examples:
+  - |
+    rpm {
+        rpm-requests {
+            compatible = "qcom,rpm-msm8916";
+            qcom,smd-channels = "rpm_requests";
+
+            clock-controller {
+                compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+                #clock-cells = <1>;
+            };
+        };
+    };
+
+  - |
+    rpm {
+        clock-controller {
+            compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+            #clock-cells = <1>;
+            clocks = <&pxo_board>;
+            clock-names = "pxo";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
index 2cd158f13bab..437a34b930e3 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -18,8 +18,18 @@ properties:
   compatible:
     enum:
       - qcom,sc7180-rpmh-clk
+      - qcom,sc7280-rpmh-clk
+      - qcom,sc8180x-rpmh-clk
+      - qcom,sc8280xp-rpmh-clk
+      - qcom,sdm670-rpmh-clk
       - qcom,sdm845-rpmh-clk
+      - qcom,sdx55-rpmh-clk
+      - qcom,sdx65-rpmh-clk
+      - qcom,sm6350-rpmh-clk
       - qcom,sm8150-rpmh-clk
+      - qcom,sm8250-rpmh-clk
+      - qcom,sm8350-rpmh-clk
+      - qcom,sm8450-rpmh-clk
 
   clocks:
     maxItems: 1
@@ -35,6 +45,8 @@ required:
   - compatible
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Example for GCC for SDM845: The below node should be defined inside
   # &apps_rsc node.
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
new file mode 100644
index 000000000000..f49027edfc44
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller Binding for SC7180
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm camera clock control module which supports the clocks, resets and
+  power domains on SC7180.
+
+  See also:
+  - dt-bindings/clock/qcom,camcc-sc7180.h
+
+properties:
+  compatible:
+    const: qcom,sc7180-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Camera_ahb clock from GCC
+      - description: Camera XO clock from GCC
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: iface
+      - const: xo
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sc7180-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_CAMERA_AHB_CLK>,
+               <&gcc GCC_CAMERA_XO_CLK>;
+      clock-names = "bi_tcxo", "iface", "xo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
index 0429062f1585..e94847f92770 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
@@ -58,13 +58,15 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc7180.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@af00000 {
       compatible = "qcom,sc7180-dispcc";
-      reg = <0 0x0af00000 0 0x200000>;
+      reg = <0x0af00000 0x200000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&gcc GCC_DISP_GPLL0_CLK_SRC>,
                <&dsi_phy 0>,
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
deleted file mode 100644
index 5785192cc4be..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
+++ /dev/null
@@ -1,72 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sc7180-gpucc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Graphics Clock & Reset Controller Binding for SC7180
-
-maintainers:
-  - Taniya Das <tdas@codeaurora.org>
-
-description: |
-  Qualcomm graphics clock control module which supports the clocks, resets and
-  power domains on SC7180.
-
-  See also dt-bindings/clock/qcom,gpucc-sc7180.h.
-
-properties:
-  compatible:
-    const: qcom,sc7180-gpucc
-
-  clocks:
-    items:
-      - description: Board XO source
-      - description: GPLL0 main branch source
-      - description: GPLL0 div branch source
-
-  clock-names:
-    items:
-      - const: bi_tcxo
-      - const: gcc_gpu_gpll0_clk_src
-      - const: gcc_gpu_gpll0_div_clk_src
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    clock-controller@5090000 {
-      compatible = "qcom,sc7180-gpucc";
-      reg = <0 0x05090000 0 0x9000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>,
-               <&gcc GCC_GPU_GPLL0_CLK_SRC>,
-               <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
-      clock-names = "bi_tcxo",
-                    "gcc_gpu_gpll0_clk_src",
-                    "gcc_gpu_gpll0_div_clk_src";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
new file mode 100644
index 000000000000..c54172fbf29f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-lpasscorecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core Clock Controller Binding for SC7180
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm LPASS core clock control module which supports the clocks and
+  power domains on SC7180.
+
+  See also:
+  - dt-bindings/clock/qcom,lpasscorecc-sc7180.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-lpasshm
+      - qcom,sc7180-lpasscorecc
+
+  clocks:
+    items:
+      - description: gcc_lpass_sway clock from GCC
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bi_tcxo
+
+  power-domains:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    minItems: 1
+    items:
+      - description: lpass core cc register
+      - description: lpass audio cc register
+
+  reg-names:
+    items:
+      - const: lpass_core_cc
+      - const: lpass_audio_cc
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: qcom,sc7180-lpasshm
+then:
+  properties:
+    reg:
+      maxItems: 1
+
+else:
+  properties:
+    reg:
+      minItems: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
+    clock-controller@63000000 {
+      compatible = "qcom,sc7180-lpasshm";
+      reg = <0x63000000 0x28>;
+      clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "iface", "bi_tcxo";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
+    clock-controller@62d00000 {
+      compatible = "qcom,sc7180-lpasscorecc";
+      reg = <0x62d00000 0x50000>, <0x62780000 0x30000>;
+      reg-names = "lpass_core_cc", "lpass_audio_cc";
+      clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "iface", "bi_tcxo";
+      power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
new file mode 100644
index 000000000000..970030986a86
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Modem Clock Controller Binding for SC7180
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm modem clock control module which supports the clocks on SC7180.
+
+  See also:
+  - dt-bindings/clock/qcom,mss-sc7180.h
+
+properties:
+  compatible:
+    const: qcom,sc7180-mss
+
+  clocks:
+    items:
+      - description: gcc_mss_mfab_axi clock from GCC
+      - description: gcc_mss_nav_axi clock from GCC
+      - description: gcc_mss_cfg_ahb clock from GCC
+
+  clock-names:
+    items:
+      - const: gcc_mss_mfab_axis
+      - const: gcc_mss_nav_axi
+      - const: cfg_ahb
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    clock-controller@41a8000 {
+      compatible = "qcom,sc7180-mss";
+      reg = <0x041a8000 0x8000>;
+      clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+               <&gcc GCC_MSS_NAV_AXI_CLK>,
+               <&gcc GCC_MSS_CFG_AHB_CLK>;
+      clock-names = "gcc_mss_mfab_axis",
+                    "gcc_mss_nav_axi",
+                    "cfg_ahb";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
deleted file mode 100644
index 31df901884ac..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
+++ /dev/null
@@ -1,63 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sc7180-videocc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Video Clock & Reset Controller Binding for SC7180
-
-maintainers:
-  - Taniya Das <tdas@codeaurora.org>
-
-description: |
-  Qualcomm video clock control module which supports the clocks, resets and
-  power domains on SC7180.
-
-  See also dt-bindings/clock/qcom,videocc-sc7180.h.
-
-properties:
-  compatible:
-    const: qcom,sc7180-videocc
-
-  clocks:
-    items:
-      - description: Board XO source
-
-  clock-names:
-    items:
-      - const: bi_tcxo
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    clock-controller@ab00000 {
-      compatible = "qcom,sc7180-videocc";
-      reg = <0 0x0ab00000 0 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>;
-      clock-names = "bi_tcxo";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
new file mode 100644
index 000000000000..f27ca6f03ffa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller Binding for SC7280
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm camera clock control module which supports the clocks, resets and
+  power domains on SC7280.
+
+  See also dt-bindings/clock/qcom,camcc-sc7280.h
+
+properties:
+  compatible:
+    const: qcom,sc7280-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO active source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sc7280-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml
new file mode 100644
index 000000000000..2178666fb697
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for SC7280
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on SC7280.
+
+  See also dt-bindings/clock/qcom,dispcc-sc7280.h.
+
+properties:
+  compatible:
+    const: qcom,sc7280-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+      - description: Link clock from EDP PHY
+      - description: VCO DIV clock from EDP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+      - const: edp_phy_pll_link_clk
+      - const: edp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sc7280-dispcc";
+      reg = <0x0af00000 0x200000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>,
+               <&edp_phy 0>,
+               <&edp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk",
+                    "edp_phy_pll_link_clk",
+                    "edp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
new file mode 100644
index 000000000000..633887dc2f8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core Clock Controller Binding for SC7280
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm LPASS core clock control module which supports the clocks and
+  power domains on SC7280.
+
+  See also:
+  - dt-bindings/clock/qcom,lpass-sc7280.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-lpasscc
+
+  clocks:
+    items:
+      - description: gcc_cfg_noc_lpass_clk from GCC
+
+  clock-names:
+    items:
+      - const: iface
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    items:
+      - description: LPASS qdsp6ss register
+      - description: LPASS top-cc register
+
+  reg-names:
+    items:
+      - const: qdsp6ss
+      - const: top_cc
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpass-sc7280.h>
+    clock-controller@3000000 {
+      compatible = "qcom,sc7280-lpasscc";
+      reg = <0x03000000 0x40>, <0x03c04000 0x4>;
+      reg-names = "qdsp6ss", "top_cc";
+      clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
+      clock-names = "iface";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
new file mode 100644
index 000000000000..f50e284e5f46
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller Binding for SC7280
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm LPASS core and audio clock control module which supports the
+  clocks and power domains on SC7280.
+
+  See also:
+  - dt-bindings/clock/qcom,lpasscorecc-sc7280.h
+  - dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
+
+properties:
+  clocks: true
+
+  clock-names: true
+
+  reg: true
+
+  compatible:
+    enum:
+      - qcom,sc7280-lpassaoncc
+      - qcom,sc7280-lpassaudiocc
+      - qcom,sc7280-lpasscorecc
+      - qcom,sc7280-lpasshm
+
+  power-domains:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  qcom,adsp-pil-mode:
+    description:
+      Indicates if the LPASS would be brought out of reset using
+      peripheral loader.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7280-lpassaudiocc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: lpass_aon_cc_main_rcg_clk_src
+
+        reg:
+          items:
+            - description: lpass core cc register
+            - description: lpass audio csr register
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-lpassaoncc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board XO active only source
+            - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: iface
+
+        reg:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-lpasshm
+              - qcom,sc7280-lpasscorecc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+
+        reg:
+          maxItems: 1
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_audiocc: clock-controller@3300000 {
+      compatible = "qcom,sc7280-lpassaudiocc";
+      reg = <0x3300000 0x30000>,
+            <0x32a9000 0x1000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
+      clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
+      power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_hm: clock-controller@3c00000 {
+      compatible = "qcom,sc7280-lpasshm";
+      reg = <0x3c00000 0x28>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpasscore: clock-controller@3900000 {
+      compatible = "qcom,sc7280-lpasscorecc";
+      reg = <0x3900000 0x50000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_aon: clock-controller@3380000 {
+      compatible = "qcom,sc7280-lpassaoncc";
+      reg = <0x3380000 0x30000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>,
+               <&lpasscore LPASS_CORE_CC_CORE_CLK>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao","iface";
+      qcom,adsp-pil-mode;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
new file mode 100644
index 000000000000..d4239ccae917
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller Binding for SDM845
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm camera clock control module which supports the clocks, resets and
+  power domains on SDM845.
+
+  See also dt-bindings/clock/qcom,camcc-sm845.h
+
+properties:
+  compatible:
+    const: qcom,sdm845-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sdm845-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
index 89269ddfbdcd..4a3be733d042 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
@@ -67,13 +67,15 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@af00000 {
       compatible = "qcom,sdm845-dispcc";
-      reg = <0 0x0af00000 0 0x10000>;
+      reg = <0x0af00000 0x10000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&gcc GCC_DISP_GPLL0_CLK_SRC>,
                <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
deleted file mode 100644
index bac04f1c5d79..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
+++ /dev/null
@@ -1,72 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sdm845-gpucc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Graphics Clock & Reset Controller Binding for SDM845
-
-maintainers:
-  - Taniya Das <tdas@codeaurora.org>
-
-description: |
-  Qualcomm graphics clock control module which supports the clocks, resets and
-  power domains on SDM845.
-
-  See also dt-bindings/clock/qcom,gpucc-sdm845.h.
-
-properties:
-  compatible:
-    const: qcom,sdm845-gpucc
-
-  clocks:
-    items:
-      - description: Board XO source
-      - description: GPLL0 main branch source
-      - description: GPLL0 div branch source
-
-  clock-names:
-    items:
-      - const: bi_tcxo
-      - const: gcc_gpu_gpll0_clk_src
-      - const: gcc_gpu_gpll0_div_clk_src
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    clock-controller@5090000 {
-      compatible = "qcom,sdm845-gpucc";
-      reg = <0 0x05090000 0 0x9000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>,
-               <&gcc GCC_GPU_GPLL0_CLK_SRC>,
-               <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
-      clock-names = "bi_tcxo",
-                    "gcc_gpu_gpll0_clk_src",
-                    "gcc_gpu_gpll0_div_clk_src";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
deleted file mode 100644
index 9d216c0f11d4..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
+++ /dev/null
@@ -1,63 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sdm845-videocc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Video Clock & Reset Controller Binding for SDM845
-
-maintainers:
-  - Taniya Das <tdas@codeaurora.org>
-
-description: |
-  Qualcomm video clock control module which supports the clocks, resets and
-  power domains on SDM845.
-
-  See also dt-bindings/clock/qcom,videocc-sdm845.h.
-
-properties:
-  compatible:
-    const: qcom,sdm845-videocc
-
-  clocks:
-    items:
-      - description: Board XO source
-
-  clock-names:
-    items:
-      - const: bi_tcxo
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    clock-controller@ab00000 {
-      compatible = "qcom,sdm845-videocc";
-      reg = <0 0x0ab00000 0 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>;
-      clock-names = "bi_tcxo";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
new file mode 100644
index 000000000000..6660ff16ad1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6115-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller for SM6115
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks and
+  power domains on SM6115.
+
+  See also:
+    include/dt-bindings/clock/qcom,sm6115-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: GPLL0 DISP DIV clock from GCC
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6115-dispcc";
+      reg = <0x5f00000 0x20000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml
new file mode 100644
index 000000000000..3c573e1a1257
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM6375
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SM6375
+
+  See also:
+  - dt-bindings/clock/qcom,sm6375-gcc.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO Active-Only source
+      - description: Sleep clock source
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+      compatible = "qcom,sm6375-gcc";
+      reg = <0x01400000 0x1f0000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+               <&sleep_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
new file mode 100644
index 000000000000..268f4c6ae0ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller Binding for SM8450
+
+maintainers:
+  - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+description: |
+  Qualcomm camera clock control module which supports the clocks, resets and
+  power domains on SM8450.
+
+  See also include/dt-bindings/clock/qcom,sm8450-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8450-camcc
+
+  clocks:
+    items:
+      - description: Camera AHB clock from GCC
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - required-opps
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@ade0000 {
+      compatible = "qcom,sm8450-camcc";
+      reg = <0xade0000 0x20000>;
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd SM8450_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
new file mode 100644
index 000000000000..1cc2457f8208
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8450
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on SM8450.
+
+  See also:
+    include/dt-bindings/clock/qcom,sm8450-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-dispcc
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Display's AHB clock
+      - description: sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+      - description: Link clock from DP PHY1
+      - description: VCO DIV clock from DP PHY1
+      - description: Link clock from DP PHY2
+      - description: VCO DIV clock from DP PHY2
+      - description: Link clock from DP PHY3
+      - description: VCO DIV clock from DP PHY3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8450-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd SM8450_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
new file mode 100644
index 000000000000..3cdbcebdc1a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller Binding
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm video clock control module which supports the clocks, resets and
+  power domains on Qualcomm SoCs.
+
+  See also:
+    dt-bindings/clock/qcom,videocc-sc7180.h
+    dt-bindings/clock/qcom,videocc-sc7280.h
+    dt-bindings/clock/qcom,videocc-sdm845.h
+    dt-bindings/clock/qcom,videocc-sm8150.h
+    dt-bindings/clock/qcom,videocc-sm8250.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-videocc
+      - qcom,sc7280-videocc
+      - qcom,sdm845-videocc
+      - qcom,sm8150-videocc
+      - qcom,sm8250-videocc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@ab00000 {
+      compatible = "qcom,sdm845-videocc";
+      reg = <0x0ab00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd SM8250_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
index f7d48f23da44..10119d9ef4b1 100644
--- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -44,6 +44,7 @@ Required properties:
 	* "fsl,ls1046a-clockgen"
 	* "fsl,ls1088a-clockgen"
 	* "fsl,ls2080a-clockgen"
+	* "fsl,lx2160a-clockgen"
 	Chassis-version clock strings include:
 	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
 	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
diff --git a/Documentation/devicetree/bindings/clock/renesas,9series.yaml b/Documentation/devicetree/bindings/clock/renesas,9series.yaml
new file mode 100644
index 000000000000..102eb95cb3fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,9series.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,9series.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Renesas 9-series I2C PCIe clock generators
+
+description: |
+  The Renesas 9-series are I2C PCIe clock generators providing
+  from 1 to 20 output clocks.
+
+  When referencing the provided clock in the DT using phandle
+  and clock specifier, the following mapping applies:
+
+  - 9FGV0241:
+    0 -- DIF0
+    1 -- DIF1
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - renesas,9fgv0241
+
+  reg:
+    description: I2C device address
+    enum: [ 0x68, 0x6a ]
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XTal input clock
+
+  renesas,out-amplitude-microvolt:
+    enum: [ 600000, 700000, 800000, 900000 ]
+    description: Output clock signal amplitude
+
+  renesas,out-spread-spectrum:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 100000, 99750, 99500 ]
+    description: Output clock down spread in pcm (1/1000 of percent)
+
+patternProperties:
+  "^DIF[0-19]$":
+    type: object
+    description:
+      Description of one of the outputs (DIF0..DIF19).
+
+    properties:
+      renesas,slew-rate:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 2000000, 3000000 ]
+        description: Output clock slew rate select in V/ns
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* 25MHz reference crystal */
+    ref25: ref25m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rs9: clock-generator@6a {
+            compatible = "renesas,9fgv0241";
+            reg = <0x6a>;
+            #clock-cells = <1>;
+
+            clocks = <&ref25m>;
+
+            DIF0 {
+                renesas,slew-rate = <3000000>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
new file mode 100644
index 000000000000..9185d101737e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Clock Pulse Generator (CPG)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Clock Pulse Generator (CPG) generates core clocks for the SoC.  It
+  includes PLLs, and fixed and variable ratio dividers.
+
+  The CPG may also provide a Clock Domain for SoC devices, in combination with
+  the CPG Module Stop (MSTP) Clocks.
+
+properties:
+  compatible:
+    oneOf:
+      - const: renesas,r8a73a4-cpg-clocks     # R-Mobile APE6
+      - const: renesas,r8a7740-cpg-clocks     # R-Mobile A1
+      - const: renesas,r8a7778-cpg-clocks     # R-Car M1
+      - const: renesas,r8a7779-cpg-clocks     # R-Car H1
+      - items:
+          - enum:
+              - renesas,r7s72100-cpg-clocks   # RZ/A1H
+          - const: renesas,rz-cpg-clocks      # RZ/A1
+      - const: renesas,sh73a0-cpg-clocks      # SH-Mobile AG5
+
+  reg:
+    maxItems: 1
+
+  clocks: true
+
+  '#clock-cells':
+    const: 1
+
+  clock-output-names: true
+
+  renesas,mode:
+    description: Board-specific settings of the MD_CK* bits on R-Mobile A1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+
+  '#power-domain-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - clock-output-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r8a73a4-cpg-clocks
+    then:
+      properties:
+        clocks:
+          items:
+            - description: extal1
+            - description: extal2
+
+        clock-output-names:
+          items:
+            - const: main
+            - const: pll0
+            - const: pll1
+            - const: pll2
+            - const: pll2s
+            - const: pll2h
+            - const: z
+            - const: z2
+            - const: i
+            - const: m3
+            - const: b
+            - const: m1
+            - const: m2
+            - const: zx
+            - const: zs
+            - const: hp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r8a7740-cpg-clocks
+    then:
+      properties:
+        clocks:
+          items:
+            - description: extal1
+            - description: extal2
+            - description: extalr
+
+        clock-output-names:
+          items:
+            - const: system
+            - const: pllc0
+            - const: pllc1
+            - const: pllc2
+            - const: r
+            - const: usb24s
+            - const: i
+            - const: zg
+            - const: b
+            - const: m1
+            - const: hp
+            - const: hpp
+            - const: usbp
+            - const: s
+            - const: zb
+            - const: m3
+            - const: cp
+
+      required:
+        - renesas,mode
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r8a7778-cpg-clocks
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-output-names:
+          items:
+            - const: plla
+            - const: pllb
+            - const: b
+            - const: out
+            - const: p
+            - const: s
+            - const: s1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r8a7779-cpg-clocks
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-output-names:
+          items:
+            - const: plla
+            - const: z
+            - const: zs
+            - const: s
+            - const: s1
+            - const: p
+            - const: b
+            - const: out
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r7s72100-cpg-clocks
+    then:
+      properties:
+        clocks:
+          items:
+            - description: extal1
+            - description: usb_x1
+
+        clock-output-names:
+          items:
+            - const: pll
+            - const: i
+            - const: g
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,sh73a0-cpg-clocks
+    then:
+      properties:
+        clocks:
+          items:
+            - description: extal1
+            - description: extal2
+
+        clock-output-names:
+          items:
+            - const: main
+            - const: pll0
+            - const: pll1
+            - const: pll2
+            - const: pll3
+            - const: dsi0phy
+            - const: dsi1phy
+            - const: zg
+            - const: m3
+            - const: b
+            - const: m1
+            - const: m2
+            - const: z
+            - const: zx
+            - const: hp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r8a7778-cpg-clocks
+              - renesas,r8a7779-cpg-clocks
+              - renesas,rz-cpg-clocks
+    then:
+      required:
+        - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7740-clock.h>
+    cpg_clocks: cpg_clocks@e6150000 {
+            compatible = "renesas,r8a7740-cpg-clocks";
+            reg = <0xe6150000 0x10000>;
+            clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
+            #clock-cells = <1>;
+            clock-output-names = "system", "pllc0", "pllc1", "pllc2", "r",
+                                 "usb24s", "i", "zg", "b", "m1", "hp", "hpp",
+                                 "usbp", "s", "zb", "m3", "cp";
+            renesas,mode = <0x05>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
new file mode 100644
index 000000000000..2197c952e21d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-div6-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas CPG DIV6 Clock
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse
+  Generator (CPG). Their clock input is divided by a configurable factor from 1
+  to 64.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a73a4-div6-clock # R-Mobile APE6
+          - renesas,r8a7740-div6-clock # R-Mobile A1
+          - renesas,sh73a0-div6-clock  # SH-Mobile AG5
+      - const: renesas,cpg-div6-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - maxItems: 1
+      - maxItems: 4
+      - maxItems: 8
+    description:
+      For clocks with multiple parents, invalid settings must be specified as
+      "<0>".
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a73a4-clock.h>
+
+    cpg_clocks: cpg_clocks@e6150000 {
+            compatible = "renesas,r8a73a4-cpg-clocks";
+            reg = <0xe6150000 0x10000>;
+            clocks = <&extal1_clk>, <&extal2_clk>;
+            #clock-cells = <1>;
+            clock-output-names = "main", "pll0", "pll1", "pll2",
+                                  "pll2s", "pll2h", "z", "z2",
+                                  "i", "m3", "b", "m1", "m2",
+                                  "zx", "zs", "hp";
+    };
+
+    sdhi2_clk: sdhi2_clk@e615007c {
+            compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+            reg = <0xe615007c 4>;
+            clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>,
+                     <&extal2_clk>;
+            #clock-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
deleted file mode 100644
index ae36ab842919..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Renesas CPG DIV6 Clock
-
-The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse
-Generator (CPG). Their clock input is divided by a configurable factor from 1
-to 64.
-
-Required Properties:
-
-  - compatible: Must be one of the following
-    - "renesas,r8a73a4-div6-clock" for R8A73A4 (R-Mobile APE6) DIV6 clocks
-    - "renesas,r8a7740-div6-clock" for R8A7740 (R-Mobile A1) DIV6 clocks
-    - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks
-    - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2-W) DIV6 clocks
-    - "renesas,r8a7793-div6-clock" for R8A7793 (R-Car M2-N) DIV6 clocks
-    - "renesas,r8a7794-div6-clock" for R8A7794 (R-Car E2) DIV6 clocks
-    - "renesas,sh73a0-div6-clock" for SH73A0 (SH-Mobile AG5) DIV6 clocks
-    and "renesas,cpg-div6-clock" as a fallback.
-  - reg: Base address and length of the memory resource used by the DIV6 clock
-  - clocks: Reference to the parent clock(s); either one, four, or eight
-    clocks must be specified.  For clocks with multiple parents, invalid
-    settings must be specified as "<0>".
-  - #clock-cells: Must be 0
-
-
-Optional Properties:
-
-  - clock-output-names: The name of the clock as a free-form string
-
-
-Example
--------
-
-	sdhi2_clk: sdhi2_clk@e615007c {
-		compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
-		reg = <0 0xe615007c 0 4>;
-		clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
-			 <0>, <&extal2_clk>;
-		#clock-cells = <0>;
-		clock-output-names = "sdhi2ck";
-	};
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
deleted file mode 100644
index f4d153f24a0f..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-* Renesas Clock Pulse Generator / Module Standby and Software Reset
-
-On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator)
-and MSSR (Module Standby and Software Reset) blocks are intimately connected,
-and share the same register block.
-
-They provide the following functionalities:
-  - The CPG block generates various core clocks,
-  - The MSSR block provides two functions:
-      1. Module Standby, providing a Clock Domain to control the clock supply
-	 to individual SoC devices,
-      2. Reset Control, to perform a software reset of individual SoC devices.
-
-Required Properties:
-  - compatible: Must be one of:
-      - "renesas,r7s9210-cpg-mssr" for the r7s9210 SoC (RZ/A2)
-      - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M)
-      - "renesas,r8a7744-cpg-mssr" for the r8a7744 SoC (RZ/G1N)
-      - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E)
-      - "renesas,r8a77470-cpg-mssr" for the r8a77470 SoC (RZ/G1C)
-      - "renesas,r8a774a1-cpg-mssr" for the r8a774a1 SoC (RZ/G2M)
-      - "renesas,r8a774b1-cpg-mssr" for the r8a774b1 SoC (RZ/G2N)
-      - "renesas,r8a774c0-cpg-mssr" for the r8a774c0 SoC (RZ/G2E)
-      - "renesas,r8a7790-cpg-mssr" for the r8a7790 SoC (R-Car H2)
-      - "renesas,r8a7791-cpg-mssr" for the r8a7791 SoC (R-Car M2-W)
-      - "renesas,r8a7792-cpg-mssr" for the r8a7792 SoC (R-Car V2H)
-      - "renesas,r8a7793-cpg-mssr" for the r8a7793 SoC (R-Car M2-N)
-      - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2)
-      - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
-      - "renesas,r8a7796-cpg-mssr" for the r8a77960 SoC (R-Car M3-W)
-      - "renesas,r8a77961-cpg-mssr" for the r8a77961 SoC (R-Car M3-W+)
-      - "renesas,r8a77965-cpg-mssr" for the r8a77965 SoC (R-Car M3-N)
-      - "renesas,r8a77970-cpg-mssr" for the r8a77970 SoC (R-Car V3M)
-      - "renesas,r8a77980-cpg-mssr" for the r8a77980 SoC (R-Car V3H)
-      - "renesas,r8a77990-cpg-mssr" for the r8a77990 SoC (R-Car E3)
-      - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3)
-
-  - reg: Base address and length of the memory resource used by the CPG/MSSR
-    block
-
-  - clocks: References to external parent clocks, one entry for each entry in
-    clock-names
-  - clock-names: List of external parent clock names. Valid names are:
-      - "extal" (r7s9210, r8a7743, r8a7744, r8a7745, r8a77470, r8a774a1,
-		 r8a774b1, r8a774c0, r8a7790, r8a7791, r8a7792, r8a7793,
-		 r8a7794, r8a7795, r8a77960, r8a77961, r8a77965, r8a77970,
-		 r8a77980, r8a77990, r8a77995)
-      - "extalr" (r8a774a1, r8a774b1, r8a7795, r8a77960, r8a77961, r8a77965,
-		  r8a77970, r8a77980)
-      - "usb_extal" (r8a7743, r8a7744, r8a7745, r8a77470, r8a7790, r8a7791,
-		     r8a7793, r8a7794)
-
-  - #clock-cells: Must be 2
-      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
-	and a core clock reference, as defined in
-	<dt-bindings/clock/*-cpg-mssr.h>.
-      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
-	a module number, as defined in the datasheet.
-
-  - #power-domain-cells: Must be 0
-      - SoC devices that are part of the CPG/MSSR Clock Domain and can be
-	power-managed through Module Standby should refer to the CPG device
-	node in their "power-domains" property, as documented by the generic PM
-	Domain bindings in
-	Documentation/devicetree/bindings/power/power-domain.yaml.
-
-  - #reset-cells: Must be 1
-      - The single reset specifier cell must be the module number, as defined
-	in the datasheet.
-
-
-Examples
---------
-
-  - CPG device node:
-
-	cpg: clock-controller@e6150000 {
-		compatible = "renesas,r8a7795-cpg-mssr";
-		reg = <0 0xe6150000 0 0x1000>;
-		clocks = <&extal_clk>, <&extalr_clk>;
-		clock-names = "extal", "extalr";
-		#clock-cells = <2>;
-		#power-domain-cells = <0>;
-		#reset-cells = <1>;
-	};
-
-
-  - CPG/MSSR Clock Domain member device node:
-
-	scif2: serial@e6e88000 {
-		compatible = "renesas,scif-r8a7795", "renesas,scif";
-		reg = <0 0xe6e88000 0 64>;
-		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 310>;
-		clock-names = "fck";
-		dmas = <&dmac1 0x13>, <&dmac1 0x12>;
-		dma-names = "tx", "rx";
-		power-domains = <&cpg>;
-		resets = <&cpg 310>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
new file mode 100644
index 000000000000..e57bc40d307a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Clock Pulse Generator / Module Standby and Software Reset
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator)
+  and MSSR (Module Standby and Software Reset) blocks are intimately connected,
+  and share the same register block.
+
+  They provide the following functionalities:
+    - The CPG block generates various core clocks,
+    - The MSSR block provides two functions:
+        1. Module Standby, providing a Clock Domain to control the clock supply
+           to individual SoC devices,
+        2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r7s9210-cpg-mssr  # RZ/A2
+      - renesas,r8a7742-cpg-mssr  # RZ/G1H
+      - renesas,r8a7743-cpg-mssr  # RZ/G1M
+      - renesas,r8a7744-cpg-mssr  # RZ/G1N
+      - renesas,r8a7745-cpg-mssr  # RZ/G1E
+      - renesas,r8a77470-cpg-mssr # RZ/G1C
+      - renesas,r8a774a1-cpg-mssr # RZ/G2M
+      - renesas,r8a774b1-cpg-mssr # RZ/G2N
+      - renesas,r8a774c0-cpg-mssr # RZ/G2E
+      - renesas,r8a774e1-cpg-mssr # RZ/G2H
+      - renesas,r8a7790-cpg-mssr  # R-Car H2
+      - renesas,r8a7791-cpg-mssr  # R-Car M2-W
+      - renesas,r8a7792-cpg-mssr  # R-Car V2H
+      - renesas,r8a7793-cpg-mssr  # R-Car M2-N
+      - renesas,r8a7794-cpg-mssr  # R-Car E2
+      - renesas,r8a7795-cpg-mssr  # R-Car H3
+      - renesas,r8a7796-cpg-mssr  # R-Car M3-W
+      - renesas,r8a77961-cpg-mssr # R-Car M3-W+
+      - renesas,r8a77965-cpg-mssr # R-Car M3-N
+      - renesas,r8a77970-cpg-mssr # R-Car V3M
+      - renesas,r8a77980-cpg-mssr # R-Car V3H
+      - renesas,r8a77990-cpg-mssr # R-Car E3
+      - renesas,r8a77995-cpg-mssr # R-Car D3
+      - renesas,r8a779a0-cpg-mssr # R-Car V3U
+      - renesas,r8a779f0-cpg-mssr # R-Car S4-8
+      - renesas,r8a779g0-cpg-mssr # R-Car V4H
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - extal     # All
+        - extalr    # Most R-Car Gen3 and RZ/G2
+        - usb_extal # Most R-Car Gen2 and RZ/G1
+
+  '#clock-cells':
+    description: |
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+        and a core clock reference, as defined in
+        <dt-bindings/clock/*-cpg-mssr.h>
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+        a module number, as defined in the datasheet.
+    const: 2
+
+  '#power-domain-cells':
+    description:
+      SoC devices that are part of the CPG/MSSR Clock Domain and can be
+      power-managed through Module Standby should refer to the CPG device node
+      in their "power-domains" property, as documented by the generic PM Domain
+      bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
+    const: 0
+
+  '#reset-cells':
+    description:
+      The single reset specifier cell must be the module number, as defined in
+      the datasheet.
+    const: 1
+
+if:
+  not:
+    properties:
+      compatible:
+        items:
+          enum:
+            - renesas,r7s9210-cpg-mssr
+then:
+  required:
+    - '#reset-cells'
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    cpg: clock-controller@e6150000 {
+            compatible = "renesas,r8a7795-cpg-mssr";
+            reg = <0xe6150000 0x1000>;
+            clocks = <&extal_clk>, <&extalr_clk>;
+            clock-names = "extal", "extalr";
+            #clock-cells = <2>;
+            #power-domain-cells = <0>;
+            #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
deleted file mode 100644
index da578ebdda28..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Renesas CPG Module Stop (MSTP) Clocks
-
-The CPG can gate SoC device clocks. The gates are organized in groups of up to
-32 gates.
-
-This device tree binding describes a single 32 gate clocks group per node.
-Clocks are referenced by user nodes by the MSTP node phandle and the clock
-index in the group, from 0 to 31.
-
-Required Properties:
-
-  - compatible: Must be one of the following
-    - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
-    - "renesas,r8a73a4-mstp-clocks" for R8A73A4 (R-Mobile APE6) MSTP gate clocks
-    - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks
-    - "renesas,r8a7778-mstp-clocks" for R8A7778 (R-Car M1) MSTP gate clocks
-    - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
-    - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
-    - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2-W) MSTP gate clocks
-    - "renesas,r8a7792-mstp-clocks" for R8A7792 (R-Car V2H) MSTP gate clocks
-    - "renesas,r8a7793-mstp-clocks" for R8A7793 (R-Car M2-N) MSTP gate clocks
-    - "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks
-    - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks
-    and "renesas,cpg-mstp-clocks" as a fallback.
-  - reg: Base address and length of the I/O mapped registers used by the MSTP
-    clocks. The first register is the clock control register and is mandatory.
-    The second register is the clock status register and is optional when not
-    implemented in hardware.
-  - clocks: Reference to the parent clocks, one per output clock. The parents
-    must appear in the same order as the output clocks.
-  - #clock-cells: Must be 1
-  - clock-output-names: The name of the clocks as free-form strings
-  - clock-indices: Indices of the gate clocks into the group (0 to 31)
-
-The clocks, clock-output-names and clock-indices properties contain one entry
-per gate clock. The MSTP groups are sparsely populated. Unimplemented gate
-clocks must not be declared.
-
-
-Example
--------
-
-	#include <dt-bindings/clock/r8a7790-clock.h>
-
-	mstp3_clks: mstp3_clks@e615013c {
-		compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-		reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-		clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>,
-			 <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>,
-			 <&mmc0_clk>;
-		#clock-cells = <1>;
-		clock-output-names =
-			"tpu0", "mmcif1", "sdhi3", "sdhi2",
-			 "sdhi1", "sdhi0", "mmcif0";
-		clock-indices = <
-			R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
-			R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0
-			R8A7790_CLK_MMCIF0
-		>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml
new file mode 100644
index 000000000000..9752ac63288b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-mstp-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Clock Pulse Generator (CPG) Module Stop (MSTP) Clocks
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Clock Pulse Generator (CPG) can gate SoC device clocks. The gates are
+  organized in groups of up to 32 gates.
+
+  This device tree binding describes a single 32 gate clocks group per node.
+  Clocks are referenced by user nodes by the Module Stop (MSTP) node phandle
+  and the clock index in the group, from 0 to 31.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r7s72100-mstp-clocks # RZ/A1
+          - renesas,r8a73a4-mstp-clocks  # R-Mobile APE6
+          - renesas,r8a7740-mstp-clocks  # R-Mobile A1
+          - renesas,r8a7778-mstp-clocks  # R-Car M1
+          - renesas,r8a7779-mstp-clocks  # R-Car H1
+          - renesas,sh73a0-mstp-clocks   # SH-Mobile AG5
+      - const: renesas,cpg-mstp-clocks
+
+  reg:
+    minItems: 1
+    items:
+      - description: Module Stop Control Register (MSTPCR)
+      - description: Module Stop Status Register (MSTPSR)
+
+  clocks:
+    minItems: 1
+    maxItems: 32
+
+  '#clock-cells':
+    const: 1
+
+  clock-indices:
+    minItems: 1
+    maxItems: 32
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - clock-indices
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a73a4-clock.h>
+    mstp2_clks: mstp2_clks@e6150138 {
+            compatible = "renesas,r8a73a4-mstp-clocks",
+                         "renesas,cpg-mstp-clocks";
+            reg = <0xe6150138 4>, <0xe6150040 4>;
+            clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+                     <&mp_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+            #clock-cells = <1>;
+            clock-indices = <
+                    R8A73A4_CLK_SCIFA0 R8A73A4_CLK_SCIFA1
+                    R8A73A4_CLK_SCIFB0 R8A73A4_CLK_SCIFB1
+                    R8A73A4_CLK_SCIFB2 R8A73A4_CLK_SCIFB3
+                    R8A73A4_CLK_DMAC
+            >;
+            clock-output-names =
+                    "scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifb3",
+                    "dmac";
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt
deleted file mode 100644
index 268ca615459e..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Device tree Clock bindings for Renesas EMMA Mobile EV2
-
-This binding uses the common clock binding.
-
-* SMU
-System Management Unit described in user's manual R19UH0037EJ1000_SMU.
-This is not a clock provider, but clocks under SMU depend on it.
-
-Required properties:
-- compatible: Should be "renesas,emev2-smu"
-- reg: Address and Size of SMU registers
-
-* SMU_CLKDIV
-Function block with an input mux and a divider, which corresponds to
-"Serial clock generator" in fig."Clock System Overview" of the manual,
-and "xxx frequency division setting register" (XXXCLKDIV) registers.
-This makes internal (neither input nor output) clock that is provided
-to input of xxxGCLK block.
-
-Required properties:
-- compatible: Should be "renesas,emev2-smu-clkdiv"
-- reg: Byte offset from SMU base and Bit position in the register
-- clocks: Parent clocks. Input clocks as described in clock-bindings.txt
-- #clock-cells: Should be <0>
-
-* SMU_GCLK
-Clock gating node shown as "Clock stop processing block" in the
-fig."Clock System Overview" of the manual.
-Registers are "xxx clock gate control register" (XXXGCLKCTRL).
-
-Required properties:
-- compatible: Should be "renesas,emev2-smu-gclk"
-- reg: Byte offset from SMU base and Bit position in the register
-- clocks: Input clock as described in clock-bindings.txt
-- #clock-cells: Should be <0>
-
-Example of provider:
-
-usia_u0_sclkdiv: usia_u0_sclkdiv {
-	compatible = "renesas,emev2-smu-clkdiv";
-	reg = <0x610 0>;
-	clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>;
-	#clock-cells = <0>;
-};
-
-usia_u0_sclk: usia_u0_sclk {
-	compatible = "renesas,emev2-smu-gclk";
-	reg = <0x4a0 1>;
-	clocks = <&usia_u0_sclkdiv>;
-	#clock-cells = <0>;
-};
-
-Example of consumer:
-
-serial@e1020000 {
-	compatible = "renesas,em-uart";
-	reg = <0xe1020000 0x38>;
-	interrupts = <0 8 0>;
-	clocks = <&usia_u0_sclk>;
-	clock-names = "sclk";
-};
-
-Example of clock-tree description:
-
- This describes a clock path in the clock tree
-  c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
-
-smu@e0110000 {
-	compatible = "renesas,emev2-smu";
-	reg = <0xe0110000 0x10000>;
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	c32ki: c32ki {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		#clock-cells = <0>;
-	};
-	pll3_fo: pll3_fo {
-		compatible = "fixed-factor-clock";
-		clocks = <&c32ki>;
-		clock-div = <1>;
-		clock-mult = <7000>;
-		#clock-cells = <0>;
-	};
-	usia_u0_sclkdiv: usia_u0_sclkdiv {
-		compatible = "renesas,emev2-smu-clkdiv";
-		reg = <0x610 0>;
-		clocks = <&pll3_fo>;
-		#clock-cells = <0>;
-	};
-	usia_u0_sclk: usia_u0_sclk {
-		compatible = "renesas,emev2-smu-gclk";
-		reg = <0x4a0 1>;
-		clocks = <&usia_u0_sclkdiv>;
-		#clock-cells = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml
new file mode 100644
index 000000000000..4d9a64800481
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,emev2-smu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas EMMA Mobile EV2 System Management Unit
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+  The System Management Unit is described in user's manual R19UH0037EJ1000_SMU.
+  This is not a clock provider, but clocks under SMU depend on it.
+
+properties:
+  compatible:
+    const: renesas,emev2-smu
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  ".*sclkdiv@.*":
+    type: object
+
+    description: |
+      Function block with an input mux and a divider, which corresponds to
+      "Serial clock generator" in fig. "Clock System Overview" of the manual,
+      and "xxx frequency division setting register" (XXXCLKDIV) registers.
+      This makes internal (neither input nor output) clock that is provided
+      to input of xxxGCLK block.
+
+    properties:
+      compatible:
+        const: renesas,emev2-smu-clkdiv
+
+      reg:
+        maxItems: 1
+        description:
+          Byte offset from SMU base and Bit position in the register.
+
+      clocks:
+        minItems: 1
+        maxItems: 4
+
+      '#clock-cells':
+        const: 0
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - '#clock-cells'
+
+    additionalProperties: false
+
+  ".*sclk@.*":
+    type: object
+
+    description: |
+      Clock gating node shown as "Clock stop processing block" in the
+      fig. "Clock System Overview" of the manual.
+      Registers are "xxx clock gate control register" (XXXGCLKCTRL).
+
+    properties:
+      compatible:
+        const: renesas,emev2-smu-gclk
+
+      reg:
+        maxItems: 1
+        description:
+          Byte offset from SMU base and Bit position in the register.
+
+      clocks:
+        maxItems: 1
+
+      '#clock-cells':
+        const: 0
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - '#clock-cells'
+
+    additionalProperties: false
+
+additionalProperties: true
+
+examples:
+  - |
+    // Example of clock-tree description:
+    //
+    //  This describes a clock path in the clock tree
+    //   c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
+    clocks@e0110000 {
+            compatible = "renesas,emev2-smu";
+            reg = <0xe0110000 0x10000>;
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            c32ki: c32ki {
+                    compatible = "fixed-clock";
+                    clock-frequency = <32768>;
+                    #clock-cells = <0>;
+            };
+            pll3_fo: pll3_fo {
+                    compatible = "fixed-factor-clock";
+                    clocks = <&c32ki>;
+                    clock-div = <1>;
+                    clock-mult = <7000>;
+                    #clock-cells = <0>;
+            };
+            usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 {
+                    compatible = "renesas,emev2-smu-clkdiv";
+                    reg = <0x610 0>;
+                    clocks = <&pll3_fo>;
+                    #clock-cells = <0>;
+            };
+            usia_u0_sclk: usia_u0_sclk@4a0,1 {
+                    compatible = "renesas,emev2-smu-gclk";
+                    reg = <0x4a0 1>;
+                    clocks = <&usia_u0_sclkdiv>;
+                    #clock-cells = <0>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt
deleted file mode 100644
index 399e0da22348..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Renesas H8/300 divider clock
-
-Required Properties:
-
-  - compatible: Must be "renesas,h8300-div-clock"
-
-  - clocks: Reference to the parent clocks ("extal1" and "extal2")
-
-  - #clock-cells: Must be 1
-
-  - reg: Base address and length of the divide rate selector
-
-  - renesas,width: bit width of selector
-
-Example
--------
-
-		cclk: cclk {
-			compatible = "renesas,h8300-div-clock";
-			clocks = <&xclk>;
-			#clock-cells = <0>;
-			reg = <0xfee01b 2>;
-			renesas,width = <2>;
-		};
diff --git a/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt
deleted file mode 100644
index 500cdadbceb7..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Renesas H8S2678 PLL clock
-
-This device is Clock multiplyer
-
-Required Properties:
-
-  - compatible: Must be "renesas,h8s2678-pll-clock"
-
-  - clocks: Reference to the parent clocks
-
-  - #clock-cells: Must be 0
-
-  - reg: Two rate selector (Multiply / Divide) register address
-
-Example
--------
-
-		pllclk: pllclk {
-			compatible = "renesas,h8s2678-pll-clock";
-			clocks = <&xclk>;
-			#clock-cells = <0>;
-			reg = <0xfee03b 2>, <0xfee045 2>;
-		};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt
deleted file mode 100644
index ece92393e80d..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Renesas R8A73A4 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the R8A73A4 SoC. It includes five PLLs
-and several fixed ratio dividers.
-
-Required Properties:
-
-  - compatible: Must be "renesas,r8a73a4-cpg-clocks"
-
-  - reg: Base address and length of the memory resource used by the CPG
-
-  - clocks: Reference to the parent clocks ("extal1" and "extal2")
-
-  - #clock-cells: Must be 1
-
-  - clock-output-names: The names of the clocks. Supported clocks are "main",
-    "pll0", "pll1", "pll2", "pll2s", "pll2h", "z", "z2", "i", "m3", "b",
-    "m1", "m2", "zx", "zs", and "hp".
-
-
-Example
--------
-
-        cpg_clocks: cpg_clocks@e6150000 {
-                compatible = "renesas,r8a73a4-cpg-clocks";
-                reg = <0 0xe6150000 0 0x10000>;
-                clocks = <&extal1_clk>, <&extal2_clk>;
-                #clock-cells = <1>;
-                clock-output-names = "main", "pll0", "pll1", "pll2",
-                                     "pll2s", "pll2h", "z", "z2",
-                                     "i", "m3", "b", "m1", "m2",
-                                     "zx", "zs", "hp";
-        };
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt
deleted file mode 100644
index 2c03302f86ed..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-These bindings should be considered EXPERIMENTAL for now.
-
-* Renesas R8A7740  Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the R8A7740 SoC. It includes three PLLs
-and several fixed ratio and variable ratio dividers.
-
-Required Properties:
-
-  - compatible: Must be "renesas,r8a7740-cpg-clocks"
-
-  - reg: Base address and length of the memory resource used by the CPG
-
-  - clocks: Reference to the three parent clocks
-  - #clock-cells: Must be 1
-  - clock-output-names: The names of the clocks. Supported clocks are
-    "system", "pllc0", "pllc1", "pllc2", "r", "usb24s", "i", "zg", "b",
-    "m1", "hp", "hpp", "usbp", "s", "zb", "m3", and "cp".
-
-  - renesas,mode: board-specific settings of the MD_CK* bits
-
-
-Example
--------
-
-cpg_clocks: cpg_clocks@e6150000 {
-        compatible = "renesas,r8a7740-cpg-clocks";
-        reg = <0xe6150000 0x10000>;
-        clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
-        #clock-cells = <1>;
-        clock-output-names = "system", "pllc0", "pllc1",
-                             "pllc2", "r",
-                             "usb24s",
-                             "i", "zg", "b", "m1", "hp",
-                             "hpp", "usbp", "s", "zb", "m3",
-                             "cp";
-};
-
-&cpg_clocks {
-	renesas,mode = <0x05>;
-};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
deleted file mode 100644
index 7cc4c0330b53..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* Renesas R8A7778 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the R8A7778. It includes two PLLs and
-several fixed ratio dividers.
-The CPG also provides a Clock Domain for SoC devices, in combination with the
-CPG Module Stop (MSTP) Clocks.
-
-Required Properties:
-
-  - compatible: Must be "renesas,r8a7778-cpg-clocks"
-  - reg: Base address and length of the memory resource used by the CPG
-  - #clock-cells: Must be 1
-  - clock-output-names: The names of the clocks. Supported clocks are
-    "plla", "pllb", "b", "out", "p", "s", and "s1".
-  - #power-domain-cells: Must be 0
-
-SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
-through an MSTP clock should refer to the CPG device node in their
-"power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
-
-
-Examples
---------
-
-  - CPG device node:
-
-	cpg_clocks: cpg_clocks@ffc80000 {
-		compatible = "renesas,r8a7778-cpg-clocks";
-		reg = <0xffc80000 0x80>;
-		#clock-cells = <1>;
-		clocks = <&extal_clk>;
-		clock-output-names = "plla", "pllb", "b",
-				     "out", "p", "s", "s1";
-		#power-domain-cells = <0>;
-	};
-
-
-  - CPG/MSTP Clock Domain member device node:
-
-	sdhi0: sd@ffe4c000 {
-		compatible = "renesas,sdhi-r8a7778";
-		reg = <0xffe4c000 0x100>;
-		interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
-		power-domains = <&cpg_clocks>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
deleted file mode 100644
index 8c81547c29f5..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Renesas R8A7779 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the R8A7779. It includes one PLL and
-several fixed ratio dividers.
-The CPG also provides a Clock Domain for SoC devices, in combination with the
-CPG Module Stop (MSTP) Clocks.
-
-Required Properties:
-
-  - compatible: Must be "renesas,r8a7779-cpg-clocks"
-  - reg: Base address and length of the memory resource used by the CPG
-
-  - clocks: Reference to the parent clock
-  - #clock-cells: Must be 1
-  - clock-output-names: The names of the clocks. Supported clocks are "plla",
-    "z", "zs", "s", "s1", "p", "b", "out".
-  - #power-domain-cells: Must be 0
-
-SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
-through an MSTP clock should refer to the CPG device node in their
-"power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
-
-
-Examples
---------
-
-  - CPG device node:
-
-	cpg_clocks: cpg_clocks@ffc80000 {
-		compatible = "renesas,r8a7779-cpg-clocks";
-		reg = <0xffc80000 0x30>;
-		clocks = <&extal_clk>;
-		#clock-cells = <1>;
-		clock-output-names = "plla", "z", "zs", "s", "s1", "p",
-		                     "b", "out";
-		#power-domain-cells = <0>;
-	};
-
-
-  - CPG/MSTP Clock Domain member device node:
-
-	sata: sata@fc600000 {
-		compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
-		reg = <0xfc600000 0x2000>;
-		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
-		power-domains = <&cpg_clocks>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
deleted file mode 100644
index aed713cf0831..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Renesas R9A06G032 SYSCTRL
-
-Required Properties:
-
-  - compatible: Must be:
-    - "renesas,r9a06g032-sysctrl"
-  - reg: Base address and length of the SYSCTRL IO block.
-  - #clock-cells: Must be 1
-  - clocks: References to the parent clocks:
-	- external 40mhz crystal.
-	- external (optional) 32.768khz
-	- external (optional) jtag input
-	- external (optional) RGMII_REFCLK
-  - clock-names: Must be:
-        clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
-  - #power-domain-cells: Must be 0
-
-Examples
---------
-
-  - SYSCTRL node:
-
-	sysctrl: system-controller@4000c000 {
-		compatible = "renesas,r9a06g032-sysctrl";
-		reg = <0x4000c000 0x1000>;
-		#clock-cells = <1>;
-
-		clocks = <&ext_mclk>, <&ext_rtc_clk>,
-				<&ext_jtag_clk>, <&ext_rgmii_ref>;
-		clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
-		#power-domain-cells = <0>;
-	};
-
-  - Other nodes can use the clocks provided by SYSCTRL as in:
-
-	#include <dt-bindings/clock/r9a06g032-sysctrl.h>
-	uart0: serial@40060000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x40060000 0x400>;
-		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>;
-		clock-names = "baudclk", "apb_pclk";
-		power-domains = <&sysctrl>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
new file mode 100644
index 000000000000..95bf485c6cec
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,r9a06g032-sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1D (R9A06G032) System Controller
+
+maintainers:
+  - Gareth Williams <gareth.williams.jx@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    const: renesas,r9a06g032-sysctrl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: External 40 MHz crystal
+      - description: Optional external 32.768 kHz crystal
+      - description: Optional external JTAG input
+      - description: Optional external RGMII_REFCLK
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: mclk
+      - const: rtc
+      - const: jtag
+      - const: rgmii_ref_ext
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^dma-router@[a-f0-9]+$":
+    type: object
+    $ref: "../dma/renesas,rzn1-dmamux.yaml#"
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    sysctrl: system-controller@4000c000 {
+            compatible = "renesas,r9a06g032-sysctrl";
+            reg = <0x4000c000 0x1000>;
+            clocks = <&ext_mclk>, <&ext_rtc_clk>, <&ext_jtag_clk>,
+                     <&ext_rgmii_ref>;
+            clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+            #clock-cells = <1>;
+            #power-domain-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
deleted file mode 100644
index 83f6c6a7c41c..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Renesas R-Car USB 2.0 clock selector
-
-This file provides information on what the device node for the R-Car USB 2.0
-clock selector.
-
-If you connect an external clock to the USB_EXTAL pin only, you should set
-the clock rate to "usb_extal" node only.
-If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
-is not needed because this is default setting. (Of course, you can set the
-clock rates to both "usb_extal" and "usb_xtal" nodes.
-
-Case 1: An external clock connects to R-Car SoC
-	+----------+   +--- R-Car ---------------------+
-	|External  |---|USB_EXTAL ---> all usb channels|
-	|clock     |   |USB_XTAL                       |
-	+----------+   +-------------------------------+
-In this case, we need this driver with "usb_extal" clock.
-
-Case 2: An oscillator connects to R-Car SoC
-	+----------+   +--- R-Car ---------------------+
-	|Oscillator|---|USB_EXTAL -+-> all usb channels|
-	|          |---|USB_XTAL --+                   |
-	+----------+   +-------------------------------+
-In this case, we don't need this selector.
-
-Required properties:
-- compatible: "renesas,r8a7795-rcar-usb2-clock-sel" if the device is a part of
-	      an R8A7795 SoC.
-	      "renesas,r8a7796-rcar-usb2-clock-sel" if the device if a part of
-	      an R8A7796 SoC.
-	      "renesas,rcar-gen3-usb2-clock-sel" for a generic R-Car Gen3
-	      compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the USB 2.0 clock selector register block.
-- clocks: A list of phandles and specifier pairs.
-- clock-names: Name of the clocks.
- - The functional clock must be "ehci_ohci"
- - The USB_EXTAL clock pin must be "usb_extal"
- - The USB_XTAL clock pin must be "usb_xtal"
-- #clock-cells: Must be 0
-
-Example (R-Car H3):
-
-	usb2_clksel: clock-controller@e6590630 {
-		compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
-			     "renesas,rcar-gen3-usb2-clock-sel";
-		reg = <0 0xe6590630 0 0x02>;
-		clocks = <&cpg CPG_MOD 703>, <&usb_extal>, <&usb_xtal>;
-		clock-names = "ehci_ohci", "usb_extal", "usb_xtal";
-		#clock-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
new file mode 100644
index 000000000000..81f09df7147e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas R-Car USB 2.0 clock selector
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description: |
+  If you connect an external clock to the USB_EXTAL pin only, you should set
+  the clock rate to "usb_extal" node only.
+  If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
+  is not needed because this is default setting. (Of course, you can set the
+  clock rates to both "usb_extal" and "usb_xtal" nodes.
+
+  Case 1: An external clock connects to R-Car SoC
+    +----------+   +--- R-Car ---------------------+
+    |External  |---|USB_EXTAL ---> all usb channels|
+    |clock     |   |USB_XTAL                       |
+    +----------+   +-------------------------------+
+
+  In this case, we need this driver with "usb_extal" clock.
+
+  Case 2: An oscillator connects to R-Car SoC
+    +----------+   +--- R-Car ---------------------+
+    |Oscillator|---|USB_EXTAL -+-> all usb channels|
+    |          |---|USB_XTAL --+                   |
+    +----------+   +-------------------------------+
+  In this case, we don't need this selector.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-rcar-usb2-clock-sel # RZ/G2M
+          - renesas,r8a774b1-rcar-usb2-clock-sel # RZ/G2N
+          - renesas,r8a774e1-rcar-usb2-clock-sel # RZ/G2H
+          - renesas,r8a7795-rcar-usb2-clock-sel  # R-Car H3
+          - renesas,r8a7796-rcar-usb2-clock-sel  # R-Car M3-W
+          - renesas,r8a77961-rcar-usb2-clock-sel # R-Car M3-W+
+      - const: renesas,rcar-gen3-usb2-clock-sel
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: ehci_ohci
+      - const: hs-usb-if
+      - const: usb_extal
+      - const: usb_xtal
+
+  '#clock-cells':
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: ehci_ohci
+      - const: hs-usb-if
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - power-domains
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb2_clksel: clock-controller@e6590630 {
+        compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
+                     "renesas,rcar-gen3-usb2-clock-sel";
+        reg = <0xe6590630 0x02>;
+        clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+                 <&usb_extal>, <&usb_xtal>;
+        clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal";
+        #clock-cells = <0>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 703>, <&cpg 704>;
+        reset-names = "ehci_ohci", "hs-usb-if";
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
deleted file mode 100644
index 8ff3e2774ed8..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Renesas RZ/A1 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the RZ/A1 SoCs. It includes the PLL, variable
-CPU and GPU clocks, and several fixed ratio dividers.
-The CPG also provides a Clock Domain for SoC devices, in combination with the
-CPG Module Stop (MSTP) Clocks.
-
-Required Properties:
-
-  - compatible: Must be one of
-    - "renesas,r7s72100-cpg-clocks" for the r7s72100 CPG
-    and "renesas,rz-cpg-clocks" as a fallback.
-  - reg: Base address and length of the memory resource used by the CPG
-  - clocks: References to possible parent clocks. Order must match clock modes
-    in the datasheet. For the r7s72100, this is extal, usb_x1.
-  - #clock-cells: Must be 1
-  - clock-output-names: The names of the clocks. Supported clocks are "pll",
-    "i", and "g"
-  - #power-domain-cells: Must be 0
-
-SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
-through an MSTP clock should refer to the CPG device node in their
-"power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
-
-
-Examples
---------
-
-  - CPG device node:
-
-	cpg_clocks: cpg_clocks@fcfe0000 {
-		#clock-cells = <1>;
-		compatible = "renesas,r7s72100-cpg-clocks",
-			     "renesas,rz-cpg-clocks";
-		reg = <0xfcfe0000 0x18>;
-		clocks = <&extal_clk>, <&usb_x1_clk>;
-		clock-output-names = "pll", "i", "g";
-		#power-domain-cells = <0>;
-	};
-
-
-  - CPG/MSTP Clock Domain member device node:
-
-	mtu2: timer@fcff0000 {
-		compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
-		reg = <0xfcff0000 0x400>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "tgi0a";
-		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
-		clock-names = "fck";
-		power-domains = <&cpg_clocks>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
new file mode 100644
index 000000000000..487f74cdc749
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module
+  Standby Mode share the same register block. On RZ/V2M, the functionality is
+  similar, but does not have Clock Monitor Registers.
+
+  They provide the following functionalities:
+    - The CPG block generates various core clocks,
+    - The Module Standby Mode block provides two functions:
+        1. Module Standby, providing a Clock Domain to control the clock supply
+           to individual SoC devices,
+        2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} and RZ/Five
+      - renesas,r9a07g044-cpg # RZ/G2{L,LC}
+      - renesas,r9a07g054-cpg # RZ/V2L
+      - renesas,r9a09g011-cpg # RZ/V2M
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      Clock source to CPG can be either from external clock input (EXCLK) or
+      crystal oscillator (XIN/XOUT).
+    const: extal
+
+  '#clock-cells':
+    description: |
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+        and a core clock reference, as defined in
+        <dt-bindings/clock/r9a0*-cpg.h>,
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+        a module number, as defined in <dt-bindings/clock/r9a0*-cpg.h>.
+    const: 2
+
+  '#power-domain-cells':
+    description:
+      SoC devices that are part of the CPG/Module Standby Mode Clock Domain and
+      can be power-managed through Module Standby should refer to the CPG device
+      node in their "power-domains" property, as documented by the generic PM
+      Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
+    const: 0
+
+  '#reset-cells':
+    description:
+      The single reset specifier cell must be the module number, as defined in
+      <dt-bindings/clock/r9a0*-cpg.h>.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    cpg: clock-controller@11010000 {
+            compatible = "renesas,r9a07g044-cpg";
+            reg = <0x11010000 0x10000>;
+            clocks = <&extal_clk>;
+            clock-names = "extal";
+            #clock-cells = <2>;
+            #power-domain-cells = <0>;
+            #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
deleted file mode 100644
index a8978ec94831..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-These bindings should be considered EXPERIMENTAL for now.
-
-* Renesas SH73A0 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the SH73A0 SoC. It includes four PLLs
-and several fixed ratio dividers.
-
-Required Properties:
-
-  - compatible: Must be "renesas,sh73a0-cpg-clocks"
-
-  - reg: Base address and length of the memory resource used by the CPG
-
-  - clocks: Reference to the parent clocks ("extal1" and "extal2")
-
-  - #clock-cells: Must be 1
-
-  - clock-output-names: The names of the clocks. Supported clocks are "main",
-    "pll0", "pll1", "pll2", "pll3", "dsi0phy", "dsi1phy", "zg", "m3", "b",
-    "m1", "m2", "z", "zx", and "hp".
-
-
-Example
--------
-
-        cpg_clocks: cpg_clocks@e6150000 {
-                compatible = "renesas,sh73a0-cpg-clocks";
-                reg = <0 0xe6150000 0 0x10000>;
-                clocks = <&extal1_clk>, <&extal2_clk>;
-                #clock-cells = <1>;
-                clock-output-names = "main", "pll0", "pll1", "pll2",
-                                     "pll3", "dsi0phy", "dsi1phy",
-                                     "zg", "m3", "b", "m1", "m2",
-                                     "z", "zx", "hp";
-        };
diff --git a/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml b/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml
new file mode 100644
index 000000000000..8d4eb4475fc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,versaclock7.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Versaclock7 Programmable Clock Device Tree Bindings
+
+maintainers:
+  - Alex Helms <alexander.helms.jy@renesas.com>
+
+description: |
+  Renesas Versaclock7 is a family of configurable clock generator and
+  jitter attenuator ICs with fractional and integer dividers.
+
+properties:
+  '#clock-cells':
+    const: 1
+
+  compatible:
+    enum:
+      - renesas,rc21008a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: External crystal or oscillator
+
+  clock-names:
+    items:
+      - const: xin
+
+required:
+  - '#clock-cells'
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    vc7_xin: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <49152000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vc7: clock-controller@9 {
+            compatible = "renesas,rc21008a";
+            reg = <0x9>;
+            #clock-cells = <1>;
+            clocks = <&vc7_xin>;
+            clock-names = "xin";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
deleted file mode 100644
index 55e78cddec8c..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Rockchip PX30 Clock and Reset Unit
-
-The PX30 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
-- compatible: CRU should be "rockchip,px30-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed
-          in clock-names
-- clock-names: Should contain the following:
-  - "xin24m" for both PMUCRU and CRU
-  - "gpll" for CRU (sourced from PMUCRU)
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "i2sx_clkin" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
-	pmucru: clock-controller@ff2bc000 {
-		compatible = "rockchip,px30-pmucru";
-		reg = <0x0 0xff2bc000 0x0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	cru: clock-controller@ff2b0000 {
-		compatible = "rockchip,px30-cru";
-		reg = <0x0 0xff2b0000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff030000 {
-		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff030000 0x0 0x100>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
-		clock-names = "baudclk", "apb_pclk";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
new file mode 100644
index 000000000000..0f0f64b6f8cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PX30 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The PX30 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "xin32k"     - rtc clock           - optional
+    - "i2sx_clkin" - external I2S clock  - optional
+    - "gmac_clkin" - external GMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-cru
+      - rockchip,px30-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Clock for both PMUCRU and CRU
+      - description: Clock for CRU (sourced from PMUCRU)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - const: gpll
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#reset-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-cru
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+
+    pmucru: clock-controller@ff2bc000 {
+      compatible = "rockchip,px30-pmucru";
+      reg = <0xff2bc000 0x1000>;
+      clocks = <&xin24m>;
+      clock-names = "xin24m";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+    cru: clock-controller@ff2b0000 {
+      compatible = "rockchip,px30-cru";
+      reg = <0xff2b0000 0x1000>;
+      clocks = <&xin24m>, <&pmucru PLL_GPLL>;
+      clock-names = "xin24m", "gpll";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
deleted file mode 100644
index 20df350b9ef3..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Rockchip RK3036 Clock and Reset Unit
-
-The RK3036 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3036-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "rmii_clkin" - external EMAC clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3036-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@20060000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x20060000 0x100>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
new file mode 100644
index 000000000000..ba5b45464315
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3036 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3036 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "ext_i2s"    - external I2S clock  - optional
+    - "rmii_clkin" - external EMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3036-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
deleted file mode 100644
index 6f8744fd301b..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip RK3126/RK3128 Clock and Reset Unit
-
-The RK3126/RK3128 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3126-cru" or "rockchip,rk3128-cru"
-  "rockchip,rk3126-cru" - controller compatible with RK3126 SoC.
-  "rockchip,rk3128-cru" - controller compatible with RK3128 SoC.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3128-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart2: serial@20068000 {
-		compatible = "rockchip,serial";
-		reg = <0x20068000 0x100>;
-		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <24000000>;
-		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
-		clock-names = "sclk_uart", "pclk_uart";
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
new file mode 100644
index 000000000000..b3d9c8eca989
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3128-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3126/RK3128 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3126/RK3128 clock controller generates and supplies clock to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3126-cru
+      - rockchip,rk3128-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3128-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
deleted file mode 100644
index 7f368530a2e4..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip RK3188/RK3066 Clock and Reset Unit
-
-The RK3188/RK3066 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
-			"rockchip,rk3066a-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
-dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
-Similar macros exist for the reset sources in these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "xin27m" - 27mhz crystal input on rk3066 - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_cif0" - external camera clock - optional,
- - "ext_rmii" - external RMII clock - optional,
- - "ext_jtag" - externalJTAG clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
new file mode 100644
index 000000000000..ddd7e46af0f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3188/RK3066 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+  dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+  Similar macros exist for the reset sources in these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"    - crystal input                 - required
+    - "xin32k"    - RTC clock                     - optional
+    - "xin27m"    - 27mhz crystal input on RK3066 - optional
+    - "ext_hsadc" - external HSADC clock          - optional
+    - "ext_cif0"  - external camera clock         - optional
+    - "ext_rmii"  - external RMII clock           - optional
+    - "ext_jtag"  - external JTAG clock           - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3066a-cru
+      - rockchip,rk3188-cru
+      - rockchip,rk3188a-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3188-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
deleted file mode 100644
index f323048127eb..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip RK3228 Clock and Reset Unit
-
-The RK3228 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3228-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
- - "ext_hsadc" - external HSADC clock - optional
- - "phy_50m_out" - output clock of the pll in the mac phy
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3228-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10110000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10110000 0x100>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml
new file mode 100644
index 000000000000..1050fff72ade
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3228-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3228 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3228 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input                          - required
+    - "ext_i2s"     - external I2S clock                     - optional
+    - "ext_gmac"    - external GMAC clock                    - optional
+    - "ext_hsadc"   - external HSADC clock                   - optional
+    - "phy_50m_out" - output clock of the pll in the mac phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3228-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3228-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
deleted file mode 100644
index 8cb47c39ba53..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip RK3288 Clock and Reset Unit
-
-The RK3288 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3288-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_edp_24m" - external display port clock - optional,
- - "ext_vip" - external VIP clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
new file mode 100644
index 000000000000..6655e97d52e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3288 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3288 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+
+  A revision of this SoC is available: rk3288w. The clock tree is a bit
+  different so another dt-compatible is available. Noticed that it is only
+  setting the difference but there is no automatic revision detection. This
+  should be performed by boot loaders.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input               - required,
+    - "xin32k"      - rtc clock                   - optional,
+    - "ext_i2s"     - external I2S clock          - optional,
+    - "ext_hsadc"   - external HSADC clock        - optional,
+    - "ext_edp_24m" - external display port clock - optional,
+    - "ext_vip"     - external VIP clock          - optional,
+    - "ext_isp"     - external ISP clock          - optional,
+    - "ext_jtag"    - external JTAG clock         - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-cru
+      - rockchip,rk3288w-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3288-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
deleted file mode 100644
index 9b151c5b0c90..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Rockchip RK3308 Clock and Reset Unit
-
-The RK3308 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: CRU should be "rockchip,rk3308-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", "mclk_i2s2_8ch_in",
-   "mclk_i2s3_8ch_in", "mclk_i2s0_2ch_in",
-   "mclk_i2s1_2ch_in" - external I2S or SPDIF clock - optional,
- - "mac_clkin" - external MAC clock - optional
-
-Example: Clock controller node:
-
-	cru: clock-controller@ff500000 {
-		compatible = "rockchip,rk3308-cru";
-		reg = <0x0 0xff500000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff0a0000 {
-		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff0a0000 0x0 0x100>;
-		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
-		clock-names = "baudclk", "apb_pclk";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml
new file mode 100644
index 000000000000..fec37f5b80f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3308-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3308 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3308 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"                               - crystal input      - required
+    - "xin32k"                               - rtc clock          - optional
+    - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in",
+      "mclk_i2s2_8ch_in", "mclk_i2s3_8ch_in",
+      "mclk_i2s0_2ch_in", "mclk_i2s1_2ch_in" - external I2S or
+                                               SPDIF clock        - optional
+    - "mac_clkin"                            - external MAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3308-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff500000 {
+      compatible = "rockchip,rk3308-cru";
+      reg = <0xff500000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
deleted file mode 100644
index 7c8bbcfed8d2..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip RK3368 Clock and Reset Unit
-
-The RK3368 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3368-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
- - "ext_vip" - external VIP clock - optional,
- - "usbotg_out" - output clock of the pll in the otg phy
-
-Example: Clock controller node:
-
-	cru: clock-controller@ff760000 {
-		compatible = "rockchip,rk3368-cru";
-		reg = <0x0 0xff760000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml
new file mode 100644
index 000000000000..90af242b41c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3368-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3368 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3368 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input                          - required
+    - "xin32k"     - rtc clock                              - optional
+    - "ext_i2s"    - external I2S clock                     - optional
+    - "ext_gmac"   - external GMAC clock                    - optional
+    - "ext_hsadc"  - external HSADC clock                   - optional
+    - "ext_isp"    - external ISP clock                     - optional
+    - "ext_jtag"   - external JTAG clock                    - optional
+    - "ext_vip"    - external VIP clock                     - optional
+    - "usbotg_out" - output clock of the pll in the otg phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3368-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3368-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt
deleted file mode 100644
index 3bc56fae90ac..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-* Rockchip RK3399 Clock and Reset Unit
-
-The RK3399 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: PMU for CRU should be "rockchip,rk3399-pmucru"
-- compatible: CRU should be "rockchip,rk3399-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files".
-  It is used for GRF muxes, if missing any muxes present in the GRF will not
-  be available.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "clkin_gmac" - external GMAC clock - optional,
- - "clkin_i2s" - external I2S clock - optional,
- - "pclkin_cif" - external ISP clock - optional,
- - "clk_usbphy0_480m" - output clock of the pll in the usbphy0
- - "clk_usbphy1_480m" - output clock of the pll in the usbphy1
-
-Example: Clock controller node:
-
-	pmucru: pmu-clock-controller@ff750000 {
-		compatible = "rockchip,rk3399-pmucru";
-		reg = <0x0 0xff750000 0x0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	cru: clock-controller@ff760000 {
-		compatible = "rockchip,rk3399-cru";
-		reg = <0x0 0xff760000 0x0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff1a0000 {
-		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff180000 0x0 0x100>;
-		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
-		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
new file mode 100644
index 000000000000..0b758e015ee3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3399-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3399 Clock and Reset Unit
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3399 clock controller generates and supplies clock to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"           - crystal input                          - required,
+    - "xin32k"           - rtc clock                              - optional,
+    - "clkin_gmac"       - external GMAC clock                    - optional,
+    - "clkin_i2s"        - external I2S clock                     - optional,
+    - "pclkin_cif"       - external ISP clock                     - optional,
+    - "clk_usbphy0_480m" - output clock of the pll in the usbphy0
+    - "clk_usbphy1_480m" - output clock of the pll in the usbphy1
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3399-pmucru
+      - rockchip,rk3399-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files". It is used
+      for GRF muxes, if missing any muxes present in the GRF will not be
+      available.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pmucru: clock-controller@ff750000 {
+      compatible = "rockchip,rk3399-pmucru";
+      reg = <0xff750000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3399-cru";
+      reg = <0xff760000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
new file mode 100644
index 000000000000..fc7546f521c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3568-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROCKCHIP rk3568 Family Clock Control Module Binding
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3568 clock controller generates the clock and also implements a
+  reset controller for SoC peripherals.
+  (examples: provide SCLK_UART1\PCLK_UART1 and SRST_P_UART1\SRST_S_UART1 for UART module)
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3568-cru.h headers and can be
+  used in device tree sources.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-cru
+      - rockchip,rk3568-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    pmucru: clock-controller@fdd00000 {
+      compatible = "rockchip,rk3568-pmucru";
+      reg = <0xfdd00000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+  - |
+    cru: clock-controller@fdd20000 {
+      compatible = "rockchip,rk3568-cru";
+      reg = <0xfdd20000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
deleted file mode 100644
index 161326a4f9c1..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* Rockchip RV1108 Clock and Reset Unit
-
-The RV1108 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rv1108-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_vip" - external VIP clock - optional
- - "ext_i2s" - external I2S clock - optional
- - "ext_gmac" - external GMAC clock - optional
- - "hdmiphy" - external clock input derived from HDMI PHY - optional
- - "usbphy" - external clock input derived from USB PHY - optional
-
-Example: Clock controller node:
-
-	cru: cru@20200000 {
-		compatible = "rockchip,rv1108-cru";
-		reg = <0x20200000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10230000 {
-		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
-		reg = <0x10230000 0x100>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml
new file mode 100644
index 000000000000..4611d920b8df
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1108-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1108 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RV1108 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"   - crystal input                              - required
+    - "ext_vip"  - external VIP clock                         - optional
+    - "ext_i2s"  - external I2S clock                         - optional
+    - "ext_gmac" - external GMAC clock                        - optional
+    - "hdmiphy"  - external clock input derived from HDMI PHY - optional
+    - "usbphy"   - external clock input derived from USB PHY  - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1108-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20200000 {
+      compatible = "rockchip,rv1108-cru";
+      reg = <0x20200000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml
new file mode 100644
index 000000000000..0998f8b922bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1126-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1126 Clock and Reset Unit
+
+maintainers:
+  - Jagan Teki <jagan@edgeble.ai>
+  - Finley Xiao <finley.xiao@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The RV1126 clock controller generates the clock and also implements a
+  reset controller for SoC peripherals.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1126-cru
+      - rockchip,rv1126-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff490000 {
+      compatible = "rockchip,rv1126-cru";
+      reg = <0xff490000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
new file mode 100644
index 000000000000..d819dfaafff9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos-audss-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Audio SubSystem clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos-audss-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-audss-clock
+      - samsung,exynos5250-audss-clock
+      - samsung,exynos5410-audss-clock
+      - samsung,exynos5420-audss-clock
+
+  clocks:
+    minItems: 2
+    items:
+      - description:
+          Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" is
+          used if not specified.
+      - description:
+          Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" is
+          used if not specified.
+      - description:
+          Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if not
+          specified.
+      - description:
+          PCM clock, parent of sclk_pcm.  "sclk_pcm0" is used if not specified.
+      - description:
+          External i2s clock, parent of mout_i2s. "cdclk0" is used if not
+          specified.
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pll_ref
+      - const: pll_in
+      - const: sclk_audio
+      - const: sclk_pcm_in
+      - const: cdclk
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@3810000 {
+        compatible = "samsung,exynos5250-audss-clock";
+        reg = <0x03810000 0x0c>;
+        #clock-cells = <1>;
+        clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, <&ext_i2s_clk>;
+        clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
new file mode 100644
index 000000000000..0589a63e273a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/ headers.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos3250-cmu
+          - samsung,exynos3250-cmu-dmc
+          - samsung,exynos3250-cmu-isp
+          - samsung,exynos4210-clock
+          - samsung,exynos4412-clock
+          - samsung,exynos5250-clock
+      - items:
+          - enum:
+              - samsung,exynos5420-clock
+              - samsung,exynos5800-clock
+          - const: syscon
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    clock: clock-controller@10010000 {
+        compatible = "samsung,exynos5250-clock";
+        reg = <0x10010000 0x30000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml
new file mode 100644
index 000000000000..c98eff64f2b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos-ext-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC external/osc/XXTI/XusbXTI clock
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Samsung SoCs require an external clock supplied through XXTI or XusbXTI pins.
+
+properties:
+  compatible:
+    enum:
+      - samsung,clock-xxti
+      - samsung,clock-xusbxti
+      - samsung,exynos5420-oscclk
+
+  "#clock-cells":
+    const: 0
+
+  clock-frequency: true
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - clock-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    fixed-rate-clocks {
+        clock {
+            compatible = "samsung,clock-xxti";
+            clock-frequency = <24000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
new file mode 100644
index 000000000000..bee13436d1ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos4412-isp-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos4412 SoC ISP clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Clock controller for Samsung Exynos4412 SoC FIMC-ISP (Camera ISP)
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/ headers.
+
+properties:
+  compatible:
+    const: samsung,exynos4412-isp-clock
+
+  clocks:
+    items:
+      - description: CLK_ACLK200 from the main clock controller
+      - description: CLK_ACLK400_MCUISP from the main clock controller
+
+  clock-names:
+    items:
+      - const: aclk200
+      - const: aclk400_mcuisp
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - power-domains
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    clock-controller@10048000 {
+        compatible = "samsung,exynos4412-isp-clock";
+        reg = <0x10048000 0x1000>;
+        #clock-cells = <1>;
+        power-domains = <&pd_isp>;
+        clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>;
+        clock-names = "aclk200", "aclk400_mcuisp";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
new file mode 100644
index 000000000000..b05f83533e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
@@ -0,0 +1,382 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5260-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5260 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+    - "xrtcxti" - input clock from XRTCXTI
+    - "ioclk_pcm_extclk" - pcm external operation clock
+    - "ioclk_spdif_extclk" - spdif external operation clock
+    - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+  Phy clocks::
+  There are several clocks which are generated by specific PHYs.  These clocks
+  are fed into the clock controller and then routed to the hardware blocks.
+  These clocks are defined as fixed clocks in the driver with following names::
+    - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+    - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+    - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+    - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+    - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+    - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+    - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+    - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+    - "phyclk_dptx_phy_clk_div2"
+    - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+    - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+    - "phyclk_usbhost20_phy_freeclk"
+    - "phyclk_usbhost20_phy_clk48mohci"
+    - "phyclk_usbdrd30_udrd30_pipe_pclk"
+    - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5260-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5260-clock-top
+      - samsung,exynos5260-clock-peri
+      - samsung,exynos5260-clock-egl
+      - samsung,exynos5260-clock-kfc
+      - samsung,exynos5260-clock-g2d
+      - samsung,exynos5260-clock-mif
+      - samsung,exynos5260-clock-mfc
+      - samsung,exynos5260-clock-g3d
+      - samsung,exynos5260-clock-fsys
+      - samsung,exynos5260-clock-aud
+      - samsung,exynos5260-clock-isp
+      - samsung,exynos5260-clock-gscl
+      - samsung,exynos5260-clock-disp
+
+  clocks:
+    minItems: 1
+    maxItems: 19
+
+  clock-names:
+    minItems: 1
+    maxItems: 19
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_mem_pll
+            - const: dout_bus_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-peri
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: ioclk_pcm_extclk
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_spdif_extclk
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: dout_aclk_peri_66
+            - const: dout_sclk_peri_uart0
+            - const: dout_sclk_peri_uart1
+            - const: dout_sclk_peri_uart2
+            - const: dout_sclk_peri_spi0_b
+            - const: dout_sclk_peri_spi1_b
+            - const: dout_sclk_peri_spi2_b
+            - const: dout_aclk_peri_aud
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-egl
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-kfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_g2d_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_mfc_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_usbhost20_phy_phyclock
+            - const: phyclk_usbhost20_phy_freeclk
+            - const: phyclk_usbhost20_phy_clk48mohci
+            - const: phyclk_usbdrd30_udrd30_pipe_pclk
+            - const: phyclk_usbdrd30_udrd30_phyclock
+            - const: dout_aclk_fsys_200
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_pcm_extclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-isp
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_isp1_266
+            - const: dout_aclk_isp1_400
+            - const: mout_aclk_isp1_266
+
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_gscl_400
+            - const: dout_aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-disp
+    then:
+      properties:
+        clocks:
+          minItems: 19
+          maxItems: 19
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_dptx_phy_ch3_txd_clk
+            - const: phyclk_dptx_phy_ch2_txd_clk
+            - const: phyclk_dptx_phy_ch1_txd_clk
+            - const: phyclk_dptx_phy_ch0_txd_clk
+            - const: phyclk_hdmi_phy_tmds_clko
+            - const: phyclk_hdmi_phy_ref_clko
+            - const: phyclk_hdmi_phy_pixel_clko
+            - const: phyclk_hdmi_link_o_tmds_clkhi
+            - const: phyclk_mipi_dphy_4l_m_txbyte_clkhs
+            - const: phyclk_dptx_phy_o_ref_clk_24m
+            - const: phyclk_dptx_phy_clk_div2
+            - const: phyclk_mipi_dphy_4l_m_rxclkesc0
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: ioclk_spdif_extclk
+            - const: dout_aclk_peri_aud
+            - const: dout_aclk_disp_222
+            - const: dout_sclk_disp_pixel
+            - const: dout_aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5260-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5260-clock-top";
+        reg = <0x10010000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_mif MIF_DOUT_MEM_PLL>,
+                 <&clock_mif MIF_DOUT_BUS_PLL>,
+                 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+        clock-names = "fin_pll",
+                      "dout_mem_pll",
+                      "dout_bus_pll",
+                      "dout_media_pll";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
new file mode 100644
index 000000000000..b737c9d35a1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5410-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5410 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5410.h header.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5410-clock
+
+  clocks:
+    description:
+      Should contain an entry specifying the root clock from external
+      oscillator supplied through XXTI or XusbXTI pin.  This clock should be
+      defined using standard clock bindings with "fin_pll" clock-output-name.
+      That clock is being passed internally to the 9 PLLs.
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5410.h>
+
+    fin_pll: osc-clock {
+        compatible = "fixed-clock";
+        clock-frequency = <24000000>;
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5410-clock";
+        reg = <0x10010000 0x30000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
new file mode 100644
index 000000000000..3f9326e09f79
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
@@ -0,0 +1,524 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5433-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "oscclk" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5433.h header.
+
+properties:
+  compatible:
+    enum:
+        # CMU_TOP which generates clocks for
+        # IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS domains and bus
+        # clocks
+      - samsung,exynos5433-cmu-top
+        # CMU_CPIF which generates clocks for LLI (Low Latency Interface) IP
+      - samsung,exynos5433-cmu-cpif
+        # CMU_MIF which generates clocks for DRAM Memory Controller domain
+      - samsung,exynos5433-cmu-mif
+        # CMU_PERIC which generates clocks for
+        # UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs
+      - samsung,exynos5433-cmu-peric
+        # CMU_PERIS which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs
+      - samsung,exynos5433-cmu-peris
+        # CMU_FSYS which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs
+      - samsung,exynos5433-cmu-fsys
+      - samsung,exynos5433-cmu-g2d
+        # CMU_DISP which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs
+      - samsung,exynos5433-cmu-disp
+      - samsung,exynos5433-cmu-aud
+      - samsung,exynos5433-cmu-bus0
+      - samsung,exynos5433-cmu-bus1
+      - samsung,exynos5433-cmu-bus2
+      - samsung,exynos5433-cmu-g3d
+      - samsung,exynos5433-cmu-gscl
+      - samsung,exynos5433-cmu-apollo
+        # CMU_ATLAS which generates clocks for Cortex-A57 Quad-core processor,
+        # CoreSight and  L2 cache controller
+      - samsung,exynos5433-cmu-atlas
+        # CMU_MSCL which generates clocks for M2M (Memory to Memory) scaler and
+        # JPEG IPs
+      - samsung,exynos5433-cmu-mscl
+      - samsung,exynos5433-cmu-mfc
+      - samsung,exynos5433-cmu-hevc
+        # CMU_ISP which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs
+      - samsung,exynos5433-cmu-isp
+        # CMU_CAM0 which generates clocks for
+        # MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs
+      - samsung,exynos5433-cmu-cam0
+        # CMU_CAM1 which generates clocks for
+        # Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs
+      - samsung,exynos5433-cmu-cam1
+        # CMU_IMEM which generates clocks for SSS (Security SubSystem) and
+        # SlimSSS IPs
+      - samsung,exynos5433-cmu-imem
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+            - const: sclk_mfc_pll
+            - const: sclk_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cpif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: oscclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mif
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 10
+          maxItems: 10
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_ufs_mphy
+            - const: aclk_fsys_200
+            - const: sclk_pcie_100_fsys
+            - const: sclk_ufsunipro_fsys
+            - const: sclk_mmc2_fsys
+            - const: sclk_mmc1_fsys
+            - const: sclk_mmc0_fsys
+            - const: sclk_usbhost30_fsys
+            - const: sclk_usbdrd30_fsys
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g2d_266
+            - const: aclk_g2d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-disp
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_dsim1_disp
+            - const: sclk_dsim0_disp
+            - const: sclk_dsd_disp
+            - const: sclk_decon_tv_eclk_disp
+            - const: sclk_decon_vclk_disp
+            - const: sclk_decon_eclk_disp
+            - const: sclk_decon_tv_vclk_disp
+            - const: aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus0
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus0_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus1
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus1_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus2
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_bus2_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g3d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_gscl_111
+            - const: aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-apollo
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_apollo
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-atlas
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_atlas
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_jpeg_mscl
+            - const: aclk_mscl_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_mfc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-hevc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_hevc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-isp
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_isp_dis_400
+            - const: aclk_isp_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam0
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_cam0_333
+            - const: aclk_cam0_400
+            - const: aclk_cam0_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_isp_uart_cam1
+            - const: sclk_isp_spi1_cam1
+            - const: sclk_isp_spi0_cam1
+            - const: aclk_cam1_333
+            - const: aclk_cam1_400
+            - const: aclk_cam1_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-imem
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_imem_sssx_266
+            - const: aclk_imem_266
+            - const: aclk_imem_200
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    xxti: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "oscclk";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10030000 {
+        compatible = "samsung,exynos5433-cmu-top";
+        reg = <0x10030000 0x1000>;
+        #clock-cells = <1>;
+
+        clock-names = "oscclk",
+                      "sclk_mphy_pll",
+                      "sclk_mfc_pll",
+                      "sclk_bus_pll";
+        clocks = <&xxti>,
+                 <&cmu_cpif CLK_SCLK_MPHY_PLL>,
+                 <&cmu_mif CLK_SCLK_MFC_PLL>,
+                 <&cmu_mif CLK_SCLK_BUS_PLL>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
new file mode 100644
index 000000000000..c137c6744ef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos7-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7-clock-topc
+      - samsung,exynos7-clock-top0
+      - samsung,exynos7-clock-top1
+      - samsung,exynos7-clock-ccore
+      - samsung,exynos7-clock-peric0
+      - samsung,exynos7-clock-peric1
+      - samsung,exynos7-clock-peris
+      - samsung,exynos7-clock-fsys0
+      - samsung,exynos7-clock-fsys1
+      - samsung,exynos7-clock-mscl
+      - samsung,exynos7-clock-aud
+
+  clocks:
+    minItems: 1
+    maxItems: 13
+
+  clock-names:
+    minItems: 1
+    maxItems: 13
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top0
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+            - const: dout_sclk_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top1
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-ccore
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_ccore_133
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric0_66
+            - const: sclk_uart0
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric1
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric1_66
+            - const: sclk_uart1
+            - const: sclk_uart2
+            - const: sclk_uart3
+            - const: sclk_spi0
+            - const: sclk_spi1
+            - const: sclk_spi2
+            - const: sclk_spi3
+            - const: sclk_spi4
+            - const: sclk_i2s1
+            - const: sclk_pcm1
+            - const: sclk_spdif
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peris
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peris_66
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys0_200
+            - const: dout_sclk_mmc2
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys1_200
+            - const: dout_sclk_mmc0
+            - const: dout_sclk_mmc1
+            - const: dout_sclk_ufsunipro20
+            - const: dout_sclk_phy_fsys1
+            - const: dout_sclk_phy_fsys1_26m
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@105e0000 {
+        compatible = "samsung,exynos7-clock-top1";
+        reg = <0x105e0000 0xb000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_topc DOUT_SCLK_BUS0_PLL>,
+                 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+                 <&clock_topc DOUT_SCLK_CC_PLL>,
+                 <&clock_topc DOUT_SCLK_MFC_PLL>;
+        clock-names = "fin_pll",
+                      "dout_sclk_bus0_pll",
+                      "dout_sclk_bus1_pll",
+                      "dout_sclk_cc_pll",
+                      "dout_sclk_mfc_pll";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml
new file mode 100644
index 000000000000..006d33a9e0f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7885-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7885 SoC clock controller
+
+maintainers:
+  - Dávid Virág <virag.david003@gmail.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos7885 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that root tree
+  is an external clock: OSCCLK (26 MHz). This external clock must be defined
+  as a fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos7885.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7885-cmu-top
+      - samsung,exynos7885-cmu-core
+      - samsung,exynos7885-cmu-fsys
+      - samsung,exynos7885-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: G3D clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_g3d
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-fsys
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS bus clock (from CMU_TOP)
+            - description: MMC_CARD clock (from CMU_TOP)
+            - description: MMC_EMBD clock (from CMU_TOP)
+            - description: MMC_SDIO clock (from CMU_TOP)
+            - description: USB30DRD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_fsys_bus
+            - const: dout_fsys_mmc_card
+            - const: dout_fsys_mmc_embd
+            - const: dout_fsys_mmc_sdio
+            - const: dout_fsys_usb30drd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: SPI0 clock (from CMU_TOP)
+            - description: SPI1 clock (from CMU_TOP)
+            - description: UART0 clock (from CMU_TOP)
+            - description: UART1 clock (from CMU_TOP)
+            - description: UART2 clock (from CMU_TOP)
+            - description: USI0 clock (from CMU_TOP)
+            - description: USI1 clock (from CMU_TOP)
+            - description: USI2 clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_spi0
+            - const: dout_peri_spi1
+            - const: dout_peri_uart0
+            - const: dout_peri_uart1
+            - const: dout_peri_uart2
+            - const: dout_peri_usi0
+            - const: dout_peri_usi1
+            - const: dout_peri_usi2
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos7885.h>
+
+    cmu_peri: clock-controller@10010000 {
+        compatible = "samsung,exynos7885-cmu-peri";
+        reg = <0x10010000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>,
+                 <&cmu_top CLK_DOUT_PERI_BUS>,
+                 <&cmu_top CLK_DOUT_PERI_SPI0>,
+                 <&cmu_top CLK_DOUT_PERI_SPI1>,
+                 <&cmu_top CLK_DOUT_PERI_UART0>,
+                 <&cmu_top CLK_DOUT_PERI_UART1>,
+                 <&cmu_top CLK_DOUT_PERI_UART2>,
+                 <&cmu_top CLK_DOUT_PERI_USI0>,
+                 <&cmu_top CLK_DOUT_PERI_USI1>,
+                 <&cmu_top CLK_DOUT_PERI_USI2>;
+        clock-names = "oscclk",
+                      "dout_peri_bus",
+                      "dout_peri_spi0",
+                      "dout_peri_spi1",
+                      "dout_peri_uart0",
+                      "dout_peri_uart1",
+                      "dout_peri_uart2",
+                      "dout_peri_usi0",
+                      "dout_peri_usi1",
+                      "dout_peri_usi2";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
new file mode 100644
index 000000000000..141cf173f87d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
@@ -0,0 +1,292 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos850-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos850 SoC clock controller
+
+maintainers:
+  - Sam Protsenko <semen.protsenko@linaro.org>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos850 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external
+  clocks must be defined as fixed-rate clocks in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos850.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos850-cmu-top
+      - samsung,exynos850-cmu-apm
+      - samsung,exynos850-cmu-aud
+      - samsung,exynos850-cmu-cmgp
+      - samsung,exynos850-cmu-core
+      - samsung,exynos850-cmu-dpu
+      - samsung,exynos850-cmu-hsi
+      - samsung,exynos850-cmu-is
+      - samsung,exynos850-cmu-mfcmscl
+      - samsung,exynos850-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-apm
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_APM bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_apm_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-aud
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: AUD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_aud
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-cmgp
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CMGP bus clock (from CMU_APM)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: gout_clkcmu_cmgp_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: eMMC clock (from CMU_TOP)
+            - description: SSS clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_mmc_embd
+            - const: dout_core_sss
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-dpu
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: DPU clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_dpu
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-hsi
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: External RTC clock (32768 Hz)
+            - description: CMU_HSI bus clock (from CMU_TOP)
+            - description: SD card clock (from CMU_TOP)
+            - description: "USB 2.0 DRD clock (from CMU_TOP)"
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: rtcclk
+            - const: dout_hsi_bus
+            - const: dout_hsi_mmc_card
+            - const: dout_hsi_usb20drd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-is
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_IS bus clock (from CMU_TOP)
+            - description: Image Texture Processing core clock (from CMU_TOP)
+            - description: Visual Recognition Accelerator clock (from CMU_TOP)
+            - description: Geometric Distortion Correction clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_is_bus
+            - const: dout_is_itp
+            - const: dout_is_vra
+            - const: dout_is_gdc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-mfcmscl
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: Multi-Format Codec clock (from CMU_TOP)
+            - description: Memory to Memory Scaler clock (from CMU_TOP)
+            - description: Multi-Channel Scaler clock (from CMU_TOP)
+            - description: JPEG codec clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_mfcmscl_mfc
+            - const: dout_mfcmscl_m2m
+            - const: dout_mfcmscl_mcsc
+            - const: dout_mfcmscl_jpeg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: UART clock (from CMU_TOP)
+            - description: Parent clock for HSI2C and SPI (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_uart
+            - const: dout_peri_ip
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos850.h>
+
+    cmu_peri: clock-controller@10030000 {
+        compatible = "samsung,exynos850-cmu-peri";
+        reg = <0x10030000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>,
+                 <&cmu_top CLK_DOUT_PERI_UART>,
+                 <&cmu_top CLK_DOUT_PERI_IP>;
+        clock-names = "oscclk", "dout_peri_bus",
+                      "dout_peri_uart", "dout_peri_ip";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
new file mode 100644
index 000000000000..2ab4642679c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
@@ -0,0 +1,263 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Auto v9 SoC clock controller
+
+maintainers:
+  - Chanho Park <chanho61.park@samsung.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos Auto v9 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+  The external OSCCLK must be defined as fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/samsung,exynosautov9.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynosautov9-cmu-top
+      - samsung,exynosautov9-cmu-busmc
+      - samsung,exynosautov9-cmu-core
+      - samsung,exynosautov9-cmu-fsys0
+      - samsung,exynosautov9-cmu-fsys1
+      - samsung,exynosautov9-cmu-fsys2
+      - samsung,exynosautov9-cmu-peric0
+      - samsung,exynosautov9-cmu-peric1
+      - samsung,exynosautov9-cmu-peris
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-busmc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_BUSMC bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_busmc_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_core_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS0 bus clock (from CMU_TOP)
+            - description: CMU_FSYS0 pcie clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys0_bus
+            - const: dout_clkcmu_fsys0_pcie
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS1 bus clock (from CMU_TOP)
+            - description: CMU_FSYS1 mmc card clock (from CMU_TOP)
+            - description: CMU_FSYS1 usb clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys1_bus
+            - const: dout_clkcmu_fsys1_mmc_card
+            - const: dout_clkcmu_fsys1_usbdrd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS2 bus clock (from CMU_TOP)
+            - description: UFS clock (from CMU_TOP)
+            - description: Ethernet clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys2_bus
+            - const: dout_fsys2_clkcmu_ufs_embd
+            - const: dout_fsys2_clkcmu_ethernet
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC0 bus clock (from CMU_TOP)
+            - description: PERIC0 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric0_bus
+            - const: dout_clkcmu_peric0_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC1 bus clock (from CMU_TOP)
+            - description: PERIC1 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric1_bus
+            - const: dout_clkcmu_peric1_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peris
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIS bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peris_bus
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS2
+  - |
+    #include <dt-bindings/clock/samsung,exynosautov9.h>
+
+    cmu_fsys2: clock-controller@17c00000 {
+        compatible = "samsung,exynosautov9-cmu-fsys2";
+        reg = <0x17c00000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&xtcxo>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_BUS>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>;
+        clock-names = "oscclk",
+                      "dout_clkcmu_fsys2_bus",
+                      "dout_fsys2_clkcmu_ufs_embd",
+                      "dout_fsys2_clkcmu_ethernet";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
deleted file mode 100644
index 2726c1d58a79..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Binding for Samsung S2M and S5M family clock generator block
-============================================================
-
-This is a part of device tree bindings for S2M and S5M family multi-function
-devices.
-More information can be found in bindings/mfd/sec-core.txt file.
-
-The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz
-outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs.
-
-To register these as clocks with common clock framework instantiate under
-main device node a sub-node named "clocks".
-
-It uses the common clock binding documented in:
- - Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-
-Required properties of the "clocks" sub-node:
- - #clock-cells: should be 1.
- - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
-               "samsung,s2mps14-clk", "samsung,s5m8767-clk"
-   The S2MPS15 uses the same compatible as S2MPS13, as both provides similar
-   clocks.
-
-
-Each clock is assigned an identifier and client nodes use this identifier
-to specify the clock which they consume.
-    Clock               ID           Devices
-    ----------------------------------------------------------
-    32KhzAP		0            S2MPS11/13/14/15, S5M8767
-    32KhzCP		1            S2MPS11/13/15, S5M8767
-    32KhzBT		2            S2MPS11/13/14/15, S5M8767
-
-Include dt-bindings/clock/samsung,s2mps11.h file to use preprocessor defines
-in device tree sources.
-
-
-Example:
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-
-		s2m_osc: clocks {
-			compatible = "samsung,s2mps11-clk";
-			#clock-cells = <1>;
-			clock-output-names = "xx", "yy", "zz";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
new file mode 100644
index 000000000000..d5296e6053a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2M and S5M family clock generator block
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz
+  outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs.
+
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/samsung,s2mps11.h header.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s2mps11-clk
+      - samsung,s2mps13-clk # S2MPS13 and S2MPS15
+      - samsung,s2mps14-clk
+      - samsung,s5m8767-clk
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 3
+    description: Names for AP, CP and BT clocks.
+
+required:
+  - compatible
+  - "#clock-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml
new file mode 100644
index 000000000000..2659854ea1c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s5pv210-audss-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5Pv210 SoC Audio SubSystem clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/s5pv210-audss.h header.
+
+properties:
+  compatible:
+    const: samsung,s5pv210-audss-clock
+
+  clocks:
+    minItems: 4
+    items:
+      - description:
+          AHB bus clock of the Audio Subsystem.
+      - description:
+          Optional fixed rate PLL reference clock, parent of mout_audss. If not
+          specified (i.e. xusbxti is used for PLL reference), it is fixed to a
+          clock named "xxti".
+      - description:
+          Input PLL to the AudioSS block, parent of mout_audss.
+      - description:
+          Audio bus clock, parent of mout_i2s.
+      - description:
+          Optional external i2s clock, parent of mout_i2s. If not specified, it
+          is fixed to a clock named "iiscdclk0".
+
+  clock-names:
+    minItems: 4
+    items:
+      - const: hclk
+      - const: xxti
+      - const: fout_epll
+      - const: sclk_audio0
+      - const: iiscdclk0
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/s5pv210.h>
+
+    clock-controller@c0900000 {
+        compatible = "samsung,s5pv210-audss-clock";
+        reg = <0xc0900000 0x1000>;
+        #clock-cells = <1>;
+        clock-names = "hclk", "xxti", "fout_epll", "sclk_audio0";
+        clocks = <&clocks DOUT_HCLKP>, <&xxti>, <&clocks FOUT_EPLL>,
+                 <&clocks SCLK_AUDIO0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
deleted file mode 100644
index a86c83bf9d4e..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Samsung S5P6442/S5PC110/S5PV210 Clock Controller
-
-Samsung S5P6442, S5PC110 and S5PV210 SoCs contain integrated clock
-controller, which generates and supplies clock to various controllers
-within the SoC.
-
-Required Properties:
-
-- compatible: should be one of following:
-	- "samsung,s5pv210-clock" : for clock controller of Samsung
-	  S5PC110/S5PV210 SoCs,
-	- "samsung,s5p6442-clock" : for clock controller of Samsung
-	  S5P6442 SoC.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s5pv210.h header and can be used in device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xxti": external crystal oscillator connected to XXTI and XXTO pins of
-the SoC,
- - "xusbxti": external crystal oscillator connected to XUSBXTI and XUSBXTO
-pins of the SoC,
-
-A subset of above clocks available on given board shall be specified in
-board device tree, including the system base clock, as selected by XOM[0]
-pin of the SoC. Refer to generic fixed rate clock bindings
-documentation[1] for more information how to specify these clocks.
-
-[1] Documentation/devicetree/bindings/clock/fixed-clock.yaml
-
-Example: Clock controller node:
-
-	clock: clock-controller@7e00f000 {
-		compatible = "samsung,s5pv210-clock";
-		reg = <0x7e00f000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-Example: Required external clocks:
-
-	xxti: clock-xxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xxti";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-	xusbxti: clock-xusbxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xusbxti";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	uart0: serial@e2900000 {
-		compatible = "samsung,s5pv210-uart";
-		reg = <0xe2900000 0x400>;
-		interrupt-parent = <&vic1>;
-		interrupts = <10>;
-		clock-names = "uart", "clk_uart_baud0",
-				"clk_uart_baud1";
-		clocks = <&clocks UART0>, <&clocks UART0>,
-				<&clocks SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
new file mode 100644
index 000000000000..67a33665cf00
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s5pv210-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P6442/S5PC110/S5PV210 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "xxti" - external crystal oscillator connected to XXTI and XXTO pins of
+      the SoC,
+    - "xusbxti" - external crystal oscillator connected to XUSBXTI and XUSBXTO
+      pins of the SoC,
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/s5pv210.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-clock
+      - samsung,s5p6442-clock
+
+  clocks:
+    items:
+      - description: xxti clock
+      - description: xusbxti clock
+
+  clock-names:
+    items:
+      - const: xxti
+      - const: xusbxti
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/s5pv210.h>
+
+    xxti: clock-0 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xxti";
+        #clock-cells = <0>;
+    };
+
+    xusbxti: clock-1 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xusbxti";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@e0100000 {
+        compatible = "samsung,s5pv210-clock";
+        reg = <0xe0100000 0x10000>;
+        clock-names = "xxti", "xusbxti";
+        clocks = <&xxti>, <&xusbxti>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
deleted file mode 100644
index 349808f4fb8c..000000000000
--- a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SiFive FU540 PRCI bindings
-
-On the FU540 family of SoCs, most system-wide clock and reset integration
-is via the PRCI IP block.
-
-Required properties:
-- compatible: Should be "sifive,<chip>-prci".  Only one value is
-	supported: "sifive,fu540-c000-prci"
-- reg: Should describe the PRCI's register target physical address region
-- clocks: Should point to the hfclk device tree node and the rtcclk
-          device tree node.  The RTC clock here is not a time-of-day clock,
-	  but is instead a high-stability clock source for system timers
-	  and cycle counters.
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock via the clock ID
-macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
-These macros begin with PRCI_CLK_.
-
-The hfclk and rtcclk nodes are required, and represent physical
-crystals or resonators located on the PCB.  These nodes should be present
-underneath /, rather than /soc.
-
-Examples:
-
-/* under /, in PCB-specific DT data */
-hfclk: hfclk {
-	#clock-cells = <0>;
-	compatible = "fixed-clock";
-	clock-frequency = <33333333>;
-	clock-output-names = "hfclk";
-};
-rtcclk: rtcclk {
-	#clock-cells = <0>;
-	compatible = "fixed-clock";
-	clock-frequency = <1000000>;
-	clock-output-names = "rtcclk";
-};
-
-/* under /soc, in SoC-specific DT data */
-prci: clock-controller@10000000 {
-	compatible = "sifive,fu540-c000-prci";
-	reg = <0x0 0x10000000 0x0 0x1000>;
-	clocks = <&hfclk>, <&rtcclk>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
new file mode 100644
index 000000000000..c3be1b600007
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sifive/fu540-prci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU540 Power Reset Clock Interrupt Controller (PRCI)
+
+maintainers:
+  - Sagar Kadam <sagar.kadam@sifive.com>
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+
+description:
+  On the FU540 family of SoCs, most system-wide clock and reset integration
+  is via the PRCI IP block.
+  The clock consumer should specify the desired clock via the clock ID
+  macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
+  These macros begin with PRCI_CLK_.
+
+  The hfclk and rtcclk nodes are required, and represent physical
+  crystals or resonators located on the PCB.  These nodes should be present
+  underneath /, rather than /soc.
+
+properties:
+  compatible:
+    const: sifive,fu540-c000-prci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: high frequency clock.
+      - description: RTL clock.
+
+  clock-names:
+    items:
+      - const: hfclk
+      - const: rtcclk
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    prci: clock-controller@10000000 {
+      compatible = "sifive,fu540-c000-prci";
+      reg = <0x10000000 0x1000>;
+      clocks = <&hfclk>, <&rtcclk>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
new file mode 100644
index 000000000000..252085a0cf65
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sifive/fu740-prci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU740 Power Reset Clock Interrupt Controller (PRCI)
+
+maintainers:
+  - Zong Li <zong.li@sifive.com>
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+
+description:
+  On the FU740 family of SoCs, most system-wide clock and reset integration
+  is via the PRCI IP block.
+  The clock consumer should specify the desired clock via the clock ID
+  macros defined in include/dt-bindings/clock/sifive-fu740-prci.h.
+  These macros begin with PRCI_CLK_.
+
+  The hfclk and rtcclk nodes are required, and represent physical
+  crystals or resonators located on the PCB.  These nodes should be present
+  underneath /, rather than /soc.
+
+properties:
+  compatible:
+    const: sifive,fu740-c000-prci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: high frequency clock.
+      - description: RTL clock.
+
+  clock-names:
+    items:
+      - const: hfclk
+      - const: rtcclk
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    prci: clock-controller@10000000 {
+      compatible = "sifive,fu740-c000-prci";
+      reg = <0x10000000 0x1000>;
+      clocks = <&hfclk>, <&rtcclk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/silabs,si514.txt b/Documentation/devicetree/bindings/clock/silabs,si514.txt
index ea1a9dbc63b6..a4f28ec86f35 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si514.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si514.txt
@@ -6,7 +6,7 @@ found in the datasheet[2].
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Si514 datasheet
-    http://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
+    https://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
 
 Required properties:
  - compatible: Shall be "silabs,si514"
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5341.txt b/Documentation/devicetree/bindings/clock/silabs,si5341.txt
index a70c333e4cd4..ce55aba0ce22 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si5341.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si5341.txt
@@ -1,15 +1,21 @@
-Binding for Silicon Labs Si5341 and Si5340 programmable i2c clock generator.
+Binding for Silicon Labs Si5340, Si5341 Si5342, Si5344 and Si5345 programmable
+i2c clock generator.
 
 Reference
 [1] Si5341 Data Sheet
     https://www.silabs.com/documents/public/data-sheets/Si5341-40-D-DataSheet.pdf
 [2] Si5341 Reference Manual
     https://www.silabs.com/documents/public/reference-manuals/Si5341-40-D-RM.pdf
+[3] Si5345 Reference Manual
+    https://www.silabs.com/documents/public/reference-manuals/Si5345-44-42-D-RM.pdf
 
 The Si5341 and Si5340 are programmable i2c clock generators with up to 10 output
 clocks. The chip contains a PLL that sources 5 (or 4) multisynth clocks, which
 in turn can be directed to any of the 10 (or 4) outputs through a divider.
 The internal structure of the clock generators can be found in [2].
+The Si5345 is similar to the Si5341 with the addition of fractional input
+dividers and automatic input selection, as described in [3].
+The Si5342 and Si5344 are smaller versions of the Si5345, with 2 or 4 outputs.
 
 The driver can be used in "as is" mode, reading the current settings from the
 chip at boot, in case you have a (pre-)programmed device. If the PLL is not
@@ -18,9 +24,8 @@ it.
 
 The device type, speed grade and revision are determined runtime by probing.
 
-The driver currently only supports XTAL input mode, and does not support any
-fancy input configurations. They can still be programmed into the chip and
-the driver will leave them "as is".
+The driver currently does not support any fancy input configurations. They can
+still be programmed into the chip and the driver will leave them "as is".
 
 ==I2C device node==
 
@@ -28,6 +33,9 @@ Required properties:
 - compatible: shall be one of the following:
 	"silabs,si5340" - Si5340 A/B/C/D
 	"silabs,si5341" - Si5341 A/B/C/D
+	"silabs,si5342" - Si5342 A/B/C/D
+	"silabs,si5344" - Si5344 A/B/C/D
+	"silabs,si5345" - Si5345 A/B/C/D
 - reg: i2c device address, usually 0x74
 - #clock-cells: from common clock binding; shall be set to 2.
 	The first value is "0" for outputs, "1" for synthesizers.
@@ -36,9 +44,9 @@ Required properties:
 	corresponding to inputs. Use a fixed clock for the "xtal" input.
 	At least one must be present.
 - clock-names: One of: "xtal", "in0", "in1", "in2"
-- vdd-supply: Regulator node for VDD
 
 Optional properties:
+- vdd-supply: Regulator node for VDD
 - vdda-supply: Regulator node for VDDA
 - vdds-supply: Regulator node for VDDS
 - silabs,pll-m-num, silabs,pll-m-den: Numerator and denominator for PLL
@@ -51,7 +59,14 @@ Optional properties:
   be initialized, and always performs the soft-reset routine. Since this will
   temporarily stop all output clocks, don't do this if the chip is generating
   the CPU clock for example.
+- silabs,xaxb-ext-clk: When present, indicates that the XA/XB pins are used
+  in EXTCLK (external reference clock) rather than XTAL (crystal) mode.
 - interrupts: Interrupt for INTRb pin.
+- silabs,iovdd-33: When present, indicates that the I2C lines are using 3.3V
+  rather than 1.8V thresholds.
+- vddoX-supply (where X is an output index): Regulator node for VDDO for the
+  specified output. The driver selects the output VDD_SEL setting based on this
+  voltage.
 - #address-cells: shall be set to 1.
 - #size-cells: shall be set to 0.
 
@@ -68,8 +83,6 @@ Required child node properties:
 - reg: number of clock output.
 
 Optional child node properties:
-- vdd-supply: Regulator node for VDD for this output. The driver selects default
-	values for common-mode and amplitude based on the voltage.
 - silabs,format: Output format, one of:
 	1 = differential (defaults to LVDS levels)
 	2 = low-power (defaults to HCSL levels)
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
index f00191cad8cd..bfda6af76bee 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
@@ -2,7 +2,7 @@ Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
 
 Reference
 [1] Si5351A/B/C Data Sheet
-    http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
+    https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
 
 The Si5351a/b/c are programmable i2c clock generators with up to 8 output
 clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
diff --git a/Documentation/devicetree/bindings/clock/silabs,si570.txt b/Documentation/devicetree/bindings/clock/silabs,si570.txt
index c09f21e1d98f..5dda17df1ac5 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si570.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si570.txt
@@ -7,9 +7,9 @@ found in the data sheets[2][3].
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Si570/571 Data Sheet
-    http://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
+    https://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
 [3] Si598/599 Data Sheet
-    http://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
+    https://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
 
 Required properties:
  - compatible: Shall be one of "silabs,si570", "silabs,si571",
@@ -28,6 +28,8 @@ Optional properties:
  - clock-frequency: Output frequency to generate. This defines the output
 		    frequency set during boot. It can be reprogrammed during
 		    runtime through the common clock framework.
+ - silabs,skip-recall: Do not perform NVM->RAM recall operation. It will rely
+		       on hardware loading of RAM from NVM at power on.
 
 Example:
 	si570: clock-generator@5d {
diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
new file mode 100644
index 000000000000..9a0cc7341630
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/socionext,uniphier-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier clock controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: System clock
+        enum:
+          - socionext,uniphier-ld4-clock
+          - socionext,uniphier-pro4-clock
+          - socionext,uniphier-sld8-clock
+          - socionext,uniphier-pro5-clock
+          - socionext,uniphier-pxs2-clock
+          - socionext,uniphier-ld6b-clock
+          - socionext,uniphier-ld11-clock
+          - socionext,uniphier-ld20-clock
+          - socionext,uniphier-pxs3-clock
+          - socionext,uniphier-nx1-clock
+      - description: Media I/O (MIO) clock, SD clock
+        enum:
+          - socionext,uniphier-ld4-mio-clock
+          - socionext,uniphier-pro4-mio-clock
+          - socionext,uniphier-sld8-mio-clock
+          - socionext,uniphier-pro5-sd-clock
+          - socionext,uniphier-pxs2-sd-clock
+          - socionext,uniphier-ld11-mio-clock
+          - socionext,uniphier-ld20-sd-clock
+          - socionext,uniphier-pxs3-sd-clock
+          - socionext,uniphier-nx1-sd-clock
+      - description: Peripheral clock
+        enum:
+          - socionext,uniphier-ld4-peri-clock
+          - socionext,uniphier-pro4-peri-clock
+          - socionext,uniphier-sld8-peri-clock
+          - socionext,uniphier-pro5-peri-clock
+          - socionext,uniphier-pxs2-peri-clock
+          - socionext,uniphier-ld11-peri-clock
+          - socionext,uniphier-ld20-peri-clock
+          - socionext,uniphier-pxs3-peri-clock
+          - socionext,uniphier-nx1-peri-clock
+      - description: SoC-glue clock
+        enum:
+          - socionext,uniphier-pro4-sg-clock
+
+  "#clock-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+
+examples:
+  - |
+    sysctrl@61840000 {
+        compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
+        reg = <0x61840000 0x4000>;
+
+        clock {
+            compatible = "socionext,uniphier-ld11-clock";
+            #clock-cells = <1>;
+        };
+
+        // other nodes ...
+    };
+
+  - |
+    mioctrl@59810000 {
+        compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
+        reg = <0x59810000 0x800>;
+
+        clock {
+            compatible = "socionext,uniphier-ld11-mio-clock";
+            #clock-cells = <1>;
+        };
+
+        // other nodes ...
+    };
+
+  - |
+    perictrl@59820000 {
+        compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
+        reg = <0x59820000 0x200>;
+
+        clock {
+            compatible = "socionext,uniphier-ld11-peri-clock";
+            #clock-cells = <1>;
+        };
+
+        // other nodes ...
+    };
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt
new file mode 100644
index 000000000000..aaaf02ca2a6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt
@@ -0,0 +1,63 @@
+Spreadtrum SC9860 Clock Binding
+------------------------
+
+Required properties:
+- compatible: should contain the following compatible strings:
+	- "sprd,sc9860-pmu-gate"
+	- "sprd,sc9860-pll"
+	- "sprd,sc9860-ap-clk"
+	- "sprd,sc9860-aon-prediv"
+	- "sprd,sc9860-apahb-gate"
+	- "sprd,sc9860-aon-gate"
+	- "sprd,sc9860-aonsecure-clk"
+	- "sprd,sc9860-agcp-gate"
+	- "sprd,sc9860-gpu-clk"
+	- "sprd,sc9860-vsp-clk"
+	- "sprd,sc9860-vsp-gate"
+	- "sprd,sc9860-cam-clk"
+	- "sprd,sc9860-cam-gate"
+	- "sprd,sc9860-disp-clk"
+	- "sprd,sc9860-disp-gate"
+	- "sprd,sc9860-apapb-gate"
+
+- #clock-cells: must be 1
+
+- clocks : Should be the input parent clock(s) phandle for the clock, this
+	   property here just simply shows which clock group the clocks'
+	   parents are in, since each clk node would represent many clocks
+	   which are defined in the driver.  The detailed dependency
+	   relationship (i.e. how many parents and which are the parents)
+	   are implemented in driver code.
+
+Optional properties:
+
+- reg:	Contain the registers base address and length. It must be configured
+	only if no 'sprd,syscon' under the node.
+
+- sprd,syscon: phandle to the syscon which is in the same address area with
+	       the clock, and so we can get regmap for the clocks from the
+	       syscon device.
+
+Example:
+
+	pmu_gate: pmu-gate {
+		compatible = "sprd,sc9860-pmu-gate";
+		sprd,syscon = <&pmu_regs>;
+		clocks = <&ext_26m>;
+		#clock-cells = <1>;
+	};
+
+	pll: pll {
+		compatible = "sprd,sc9860-pll";
+		sprd,syscon = <&ana_regs>;
+		clocks = <&pmu_gate 0>;
+		#clock-cells = <1>;
+	};
+
+	ap_clk: clock-controller@20000000 {
+		compatible = "sprd,sc9860-ap-clk";
+		reg = <0 0x20000000 0 0x400>;
+		clocks = <&ext_26m>, <&pll 0>,
+			 <&pmu_gate 0>;
+		#clock-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
new file mode 100644
index 000000000000..785a12797a42
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Unisoc Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: SC9863A Clock Control Unit
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - sprd,sc9863a-ap-clk
+      - sprd,sc9863a-aon-clk
+      - sprd,sc9863a-apahb-gate
+      - sprd,sc9863a-pmu-gate
+      - sprd,sc9863a-aonapb-gate
+      - sprd,sc9863a-pll
+      - sprd,sc9863a-mpll
+      - sprd,sc9863a-rpll
+      - sprd,sc9863a-dpll
+      - sprd,sc9863a-mm-gate
+      - sprd,sc9863a-mm-clk
+      - sprd,sc9863a-apapb-gate
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      The input parent clock(s) phandle for this clock, only list fixed
+      clocks which are declared in devicetree.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ext-26m
+      - const: ext-32k
+      - const: ext-4m
+      - const: rco-100m
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+
+if:
+  properties:
+    compatible:
+      enum:
+        - sprd,sc9863a-ap-clk
+        - sprd,sc9863a-aon-clk
+then:
+  required:
+    - reg
+
+else:
+  description: |
+    Other SC9863a clock nodes should be the child of a syscon node in
+    which compatible string shoule be:
+            "sprd,sc9863a-glbregs", "syscon", "simple-mfd"
+
+    The 'reg' property for the clock node is also required if there is a sub
+    range of registers for the clocks.
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_clk: clock-controller@21500000 {
+      compatible = "sprd,sc9863a-ap-clk";
+      reg = <0x21500000 0x1000>;
+      clocks = <&ext_26m>, <&ext_32k>;
+      clock-names = "ext-26m", "ext-32k";
+      #clock-cells = <1>;
+    };
+
+  - |
+    syscon@20e00000 {
+      compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd";
+      reg = <0x20e00000 0x4000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0 0x20e00000 0x4000>;
+
+      apahb_gate: apahb-gate@0 {
+        compatible = "sprd,sc9863a-apahb-gate";
+        reg = <0x0 0x1020>;
+        #clock-cells = <1>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml
new file mode 100644
index 000000000000..5f747b0471cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/sprd,ums512-clk.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: UMS512 Soc clock controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,ums512-apahb-gate
+      - sprd,ums512-ap-clk
+      - sprd,ums512-aonapb-clk
+      - sprd,ums512-pmu-gate
+      - sprd,ums512-g0-pll
+      - sprd,ums512-g2-pll
+      - sprd,ums512-g3-pll
+      - sprd,ums512-gc-pll
+      - sprd,ums512-aon-gate
+      - sprd,ums512-audcpapb-gate
+      - sprd,ums512-audcpahb-gate
+      - sprd,ums512-gpu-clk
+      - sprd,ums512-mm-clk
+      - sprd,ums512-mm-gate-clk
+      - sprd,ums512-apapb-gate
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      The input parent clock(s) phandle for the clock, only list
+      fixed clocks which are declared in devicetree.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ext-26m
+      - const: ext-32k
+      - const: ext-4m
+      - const: rco-100m
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_clk: clock-controller@20200000 {
+      compatible = "sprd,ums512-ap-clk";
+      reg = <0x20200000 0x1000>;
+      clocks = <&ext_26m>;
+      clock-names = "ext-26m";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/sprd.txt b/Documentation/devicetree/bindings/clock/sprd.txt
deleted file mode 100644
index e9d179e882d9..000000000000
--- a/Documentation/devicetree/bindings/clock/sprd.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Spreadtrum Clock Binding
-------------------------
-
-Required properties:
-- compatible: should contain the following compatible strings:
-	- "sprd,sc9860-pmu-gate"
-	- "sprd,sc9860-pll"
-	- "sprd,sc9860-ap-clk"
-	- "sprd,sc9860-aon-prediv"
-	- "sprd,sc9860-apahb-gate"
-	- "sprd,sc9860-aon-gate"
-	- "sprd,sc9860-aonsecure-clk"
-	- "sprd,sc9860-agcp-gate"
-	- "sprd,sc9860-gpu-clk"
-	- "sprd,sc9860-vsp-clk"
-	- "sprd,sc9860-vsp-gate"
-	- "sprd,sc9860-cam-clk"
-	- "sprd,sc9860-cam-gate"
-	- "sprd,sc9860-disp-clk"
-	- "sprd,sc9860-disp-gate"
-	- "sprd,sc9860-apapb-gate"
-
-- #clock-cells: must be 1
-
-- clocks : Should be the input parent clock(s) phandle for the clock, this
-	   property here just simply shows which clock group the clocks'
-	   parents are in, since each clk node would represent many clocks
-	   which are defined in the driver.  The detailed dependency
-	   relationship (i.e. how many parents and which are the parents)
-	   are implemented in driver code.
-
-Optional properties:
-
-- reg:	Contain the registers base address and length. It must be configured
-	only if no 'sprd,syscon' under the node.
-
-- sprd,syscon: phandle to the syscon which is in the same address area with
-	       the clock, and so we can get regmap for the clocks from the
-	       syscon device.
-
-Example:
-
-	pmu_gate: pmu-gate {
-		compatible = "sprd,sc9860-pmu-gate";
-		sprd,syscon = <&pmu_regs>;
-		clocks = <&ext_26m>;
-		#clock-cells = <1>;
-	};
-
-	pll: pll {
-		compatible = "sprd,sc9860-pll";
-		sprd,syscon = <&ana_regs>;
-		clocks = <&pmu_gate 0>;
-		#clock-cells = <1>;
-	};
-
-	ap_clk: clock-controller@20000000 {
-		compatible = "sprd,sc9860-ap-clk";
-		reg = <0 0x20000000 0 0x400>;
-		clocks = <&ext_26m>, <&pll 0>,
-			 <&pmu_gate 0>;
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
index 4e385508f516..242fe922b035 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
+++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Reset Clock Controller Binding
 
 maintainers:
-  - Gabriel Fernandez <gabriel.fernandez@st.com>
+  - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
 
 description: |
   The RCC IP is both a reset and a clock controller.
@@ -41,6 +41,7 @@ description: |
 
   The list of valid indices for STM32MP1 is available in:
   include/dt-bindings/reset-controller/stm32mp1-resets.h
+  include/dt-bindings/reset-controller/stm32mp13-resets.h
 
   This file implements defines like:
   #define LTDC_R	3072
@@ -54,8 +55,13 @@ properties:
 
   compatible:
     items:
-      - const: st,stm32mp1-rcc
+      - enum:
+          - st,stm32mp1-rcc-secure
+          - st,stm32mp1-rcc
+          - st,stm32mp13-rcc
       - const: syscon
+  clocks: true
+  clock-names: true
 
   reg:
     maxItems: 1
@@ -66,14 +72,54 @@ required:
   - compatible
   - reg
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32mp1-rcc-secure
+          - st,stm32mp13-rcc
+then:
+  properties:
+    clocks:
+      description: Specifies oscillators.
+      maxItems: 5
+
+    clock-names:
+      items:
+        - const: hse
+        - const: hsi
+        - const: csi
+        - const: lse
+        - const: lsi
+  required:
+    - clocks
+    - clock-names
+else:
+  properties:
+    clocks:
+      description:
+        Specifies the external RX clock for ethernet MAC.
+      maxItems: 1
+
+    clock-names:
+      const: ETH_RX_CLK/ETH_REF_CLK
+
 additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
     rcc: rcc@50000000 {
-        compatible = "st,stm32mp1-rcc", "syscon";
+        compatible = "st,stm32mp1-rcc-secure", "syscon";
         reg = <0x50000000 0x1000>;
         #clock-cells = <1>;
         #reset-cells = <1>;
+        clock-names = "hse", "hsi", "csi", "lse", "lsi";
+        clocks = <&scmi_clk CK_SCMI_HSE>,
+                 <&scmi_clk CK_SCMI_HSI>,
+                 <&scmi_clk CK_SCMI_CSI>,
+                 <&scmi_clk CK_SCMI_LSE>,
+                 <&scmi_clk CK_SCMI_LSI>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index f207053e0550..d0fa1e02d06d 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -10,7 +10,10 @@ Required properties:
 
 - compatible : shall be:
 	"st,clkgen-pll0"
+	"st,clkgen-pll0-a0"
+	"st,clkgen-pll0-c0"
 	"st,clkgen-pll1"
+	"st,clkgen-pll1-c0"
 	"st,stih407-clkgen-plla9"
 	"st,stih418-clkgen-plla9"
 
diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
index 7ff77fc57dff..c918075405ba 100644
--- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -64,11 +64,21 @@ Required properties:
   audio use case)
   "st,flexgen-video", "st,flexgen" (enable clock propagation on parent
 					and activate synchronous mode)
+  "st,flexgen-stih407-a0"
+  "st,flexgen-stih410-a0"
+  "st,flexgen-stih407-c0"
+  "st,flexgen-stih410-c0"
+  "st,flexgen-stih418-c0"
+  "st,flexgen-stih407-d0"
+  "st,flexgen-stih410-d0"
+  "st,flexgen-stih407-d2"
+  "st,flexgen-stih418-d2"
+  "st,flexgen-stih407-d3"
 
 - #clock-cells : from common clock binding; shall be set to 1 (multiple clock
   outputs).
 
-- clocks : must be set to the parent's phandle. it's could be output clocks of
+- clocks : must be set to the parent's phandle. it could be output clocks of
   a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
 
 - clock-output-names : List of strings used to name the clock outputs.
diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
index d93d49342e60..c4ba2adb0b4f 100644
--- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -12,6 +12,9 @@ This binding uses the common clock binding[1].
 Required properties:
 - compatible : shall be:
   "st,quadfs"
+  "st,quadfs-d0"
+  "st,quadfs-d2"
+  "st,quadfs-d3"
   "st,quadfs-pll"
 
 
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml
new file mode 100644
index 000000000000..8f49a1ae03f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7100-audclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Audio Clock Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7100-audclk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Audio source clock
+      - description: External 12.288MHz clock
+      - description: Domain 7 AHB bus clock
+
+  clock-names:
+    items:
+      - const: audio_src
+      - const: audio_12288
+      - const: dom7ahb_bus
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive-jh7100-audio.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+
+    clock-controller@10480000 {
+            compatible = "starfive,jh7100-audclk";
+            reg = <0x10480000 0x10000>;
+            clocks = <&clkgen JH7100_CLK_AUDIO_SRC>,
+                     <&clkgen JH7100_CLK_AUDIO_12288>,
+                     <&clkgen JH7100_CLK_DOM7AHB_BUS>;
+            clock-names = "audio_src", "audio_12288", "dom7ahb_bus";
+            #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml
new file mode 100644
index 000000000000..12f17b60ecbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7100-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Clock Generator
+
+maintainers:
+  - Geert Uytterhoeven <geert@linux-m68k.org>
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7100-clkgen
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock source (25 MHz)
+      - description: Application-specific clock source (12-27 MHz)
+      - description: RMII reference clock (50 MHz)
+      - description: RGMII RX clock (125 MHz)
+
+  clock-names:
+    items:
+      - const: osc_sys
+      - const: osc_aud
+      - const: gmac_rmii_ref
+      - const: gmac_gr_mii_rxclk
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive-jh7100.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11800000 {
+            compatible = "starfive,jh7100-clkgen";
+            reg = <0x11800000 0x10000>;
+            clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>;
+            clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk";
+            #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
deleted file mode 100644
index 7cafcb98ead7..000000000000
--- a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Clock bindings for ST-Ericsson U300 System Controller Clocks
-
-Bindings for the gated system controller clocks:
-
-Required properties:
-- compatible: must be "stericsson,u300-syscon-clk"
-- #clock-cells: must be <0>
-- clock-type: specifies the type of clock:
-  0 = slow clock
-  1 = fast clock
-  2 = rest/remaining clock
-- clock-id: specifies the clock in the type range
-
-Optional properties:
-- clocks: parent clock(s)
-
-The available clocks per type are as follows:
-
-Type:  ID:   Clock:
--------------------
-0      0     Slow peripheral bridge clock
-0      1     UART0 clock
-0      4     GPIO clock
-0      6     RTC clock
-0      7     Application timer clock
-0      8     Access timer clock
-
-1      0     Fast peripheral bridge clock
-1      1     I2C bus 0 clock
-1      2     I2C bus 1 clock
-1      5     MMC interface peripheral (silicon) clock
-1      6     SPI clock
-
-2      3     CPU clock
-2      4     DMA controller clock
-2      5     External Memory Interface (EMIF) clock
-2      6     NAND flask interface clock
-2      8     XGAM graphics engine clock
-2      9     Shared External Memory Interface (SEMI) clock
-2      10    AHB Subsystem Bridge clock
-2      12    Interrupt controller clock
-
-Example:
-
-gpio_clk: gpio_clk@13M {
-	#clock-cells = <0>;
-	compatible = "stericsson,u300-syscon-clk";
-	clock-type = <0>; /* Slow */
-	clock-id = <4>;
-	clocks = <&slow_clk>;
-};
-
-gpio: gpio@c0016000 {
-	compatible = "stericsson,gpio-coh901";
-	(...)
-	clocks = <&gpio_clk>;
-};
-
-
-Bindings for the MMC/SD card clock:
-
-Required properties:
-- compatible: must be "stericsson,u300-syscon-mclk"
-- #clock-cells: must be <0>
-
-Optional properties:
-- clocks: parent clock(s)
-
-mmc_mclk: mmc_mclk {
-	#clock-cells = <0>;
-	compatible = "stericsson,u300-syscon-mclk";
-	clocks = <&mmc_pclk>;
-};
-
-mmcsd: mmcsd@c0001000 {
-	compatible = "arm,pl18x", "arm,primecell";
-	clocks = <&mmc_pclk>, <&mmc_mclk>;
-	clock-names = "apb_pclk", "mclk";
-	(...)
-};
diff --git a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
new file mode 100644
index 000000000000..2150307219a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/stericsson,u8500-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DB8500 (U8500) clocks
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: While named "U8500 clocks" these clocks are inside the
+  DB8500 digital baseband system-on-chip and its siblings such as
+  DB8520. These bindings consider the clocks present in the SoC
+  itself, not off-chip clocks. There are four different on-chip
+  clocks - RTC (32 kHz), CPU clock (SMP TWD), PRCMU (power reset and
+  control management unit) clocks and PRCC (peripheral reset and
+  clock controller) clocks. For some reason PRCC 4 does not exist so
+  the itemization can be a bit unintuitive.
+
+properties:
+  compatible:
+    enum:
+      - stericsson,u8500-clks
+      - stericsson,u8540-clks
+      - stericsson,u9540-clks
+
+  reg:
+    items:
+      - description: PRCC 1 register area
+      - description: PRCC 2 register area
+      - description: PRCC 3 register area
+      - description: PRCC 5 register area
+      - description: PRCC 6 register area
+
+  prcmu-clock:
+    description: A subnode with one clock cell for PRCMU (power, reset, control
+      management unit) clocks. The cell indicates which PRCMU clock in the
+      prcmu-clock node the consumer wants to use.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 1
+
+    additionalProperties: false
+
+  prcc-periph-clock:
+    description: A subnode with two clock cells for PRCC (peripheral
+      reset and clock controller) peripheral clocks. The first cell indicates
+      which PRCC block the consumer wants to use, possible values are 1, 2, 3,
+      5, 6. The second cell indicates which clock inside the PRCC block it
+      wants, possible values are 0 thru 31.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 2
+
+    additionalProperties: false
+
+  prcc-kernel-clock:
+    description: A subnode with two clock cells for PRCC (peripheral reset
+      and clock controller) kernel clocks. The first cell indicates which PRCC
+      block the consumer wants to use, possible values are 1, 2, 3, 5, 6. The
+      second cell indicates which clock inside the PRCC block it wants, possible
+      values are 0 thru 31.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 2
+
+    additionalProperties: false
+
+  prcc-reset-controller:
+    description: A subnode with two reset cells for the reset portions of the
+      PRCC (peripheral reset and clock controller). The first cell indicates
+      which PRCC block the consumer wants to use, possible values are 1, 2, 3
+      5 and 6. The second cell indicates which reset line inside the PRCC block
+      it wants to control, possible values are 0 thru 31.
+    type: object
+
+    properties:
+      '#reset-cells':
+        const: 2
+
+    additionalProperties: false
+
+  rtc32k-clock:
+    description: A subnode with zero clock cells for the 32kHz RTC clock.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 0
+
+    additionalProperties: false
+
+  smp-twd-clock:
+    description: A subnode for the ARM SMP Timer Watchdog cluster with zero
+      clock cells.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 0
+
+    additionalProperties: false
+
+  clkout-clock:
+    description: A subnode with three clock cells for externally routed clocks,
+      output clocks. These are two PRCMU-internal clocks that can be divided and
+      muxed out on the pads of the DB8500 SoC.
+    type: object
+
+    properties:
+      '#clock-cells':
+        description:
+          The first cell indicates which output clock we are using,
+          possible values are 0 (CLKOUT1) and 1 (CLKOUT2).
+          The second cell indicates which clock we want to use as source,
+          possible values are 0 thru 7, see the defines for the different
+          source clocks.
+          The third cell is a divider, legal values are 1 thru 63.
+        const: 3
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - prcmu-clock
+  - prcc-periph-clock
+  - prcc-kernel-clock
+  - rtc32k-clock
+  - smp-twd-clock
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ste-db8500-clkout.h>
+    clocks@8012 {
+      compatible = "stericsson,u8500-clks";
+      reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+            <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+            <0xa03cf000 0x1000>;
+
+      prcmu_clk: prcmu-clock {
+        #clock-cells = <1>;
+      };
+
+      prcc_pclk: prcc-periph-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_kclk: prcc-kernel-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_reset: prcc-reset-controller {
+        #reset-cells = <2>;
+      };
+
+      rtc_clk: rtc32k-clock {
+        #clock-cells = <0>;
+      };
+
+      smp_twd_clk: smp-twd-clock {
+        #clock-cells = <0>;
+      };
+
+      clkout_clk: clkout-clock {
+        #clock-cells = <3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
new file mode 100644
index 000000000000..bcc14088220a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sunplus,sp7021-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Clock Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-clkc
+
+  reg:
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    extclk: osc0 {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <27000000>;
+      clock-output-names = "extclk";
+    };
+
+    clkc: clock-controller@9c000004 {
+      compatible = "sunplus,sp7021-clkc";
+      reg = <0x9c000004 0x28>,
+            <0x9c000200 0x44>,
+            <0x9c000268 0x08>;
+      clocks = <&extclk>;
+      #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/tango4-clock.txt b/Documentation/devicetree/bindings/clock/tango4-clock.txt
deleted file mode 100644
index 19c580a7bda2..000000000000
--- a/Documentation/devicetree/bindings/clock/tango4-clock.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Sigma Designs Tango4 Clock Generator
-
-The Tango4 clock generator outputs cpu_clk and sys_clk (the latter is used
-for RAM and various peripheral devices). The clock binding described here
-is applicable to all Tango4 SoCs.
-
-Required Properties:
-
-- compatible: should be "sigma,tango4-clkgen".
-- reg: physical base address of the device and length of memory mapped region.
-- clocks: phandle of the input clock (crystal oscillator).
-- clock-output-names: should be "cpuclk" and "sysclk".
-- #clock-cells: should be set to 1.
-
-Example:
-
-	clkgen: clkgen@10000 {
-		compatible = "sigma,tango4-clkgen";
-		reg = <0x10000 0x40>;
-		clocks = <&xtal>;
-		clock-output-names = "cpuclk", "sysclk";
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml
new file mode 100644
index 000000000000..dc808e2f8327
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/tesla,fsd-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tesla FSD (Full Self-Driving) SoC clock controller
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - linux-fsd@tesla.com
+
+description: |
+  FSD clock controller consist of several clock management unit
+  (CMU), which generates clocks for various inteernal SoC blocks.
+  The root clock comes from external OSC clock (24 MHz).
+
+  All available clocks are defined as preprocessor macros in
+  'dt-bindings/clock/fsd-clk.h' header.
+
+properties:
+  compatible:
+    enum:
+      - tesla,fsd-clock-cmu
+      - tesla,fsd-clock-imem
+      - tesla,fsd-clock-peric
+      - tesla,fsd-clock-fsys0
+      - tesla,fsd-clock-fsys1
+      - tesla,fsd-clock-mfc
+      - tesla,fsd-clock-cam_csi
+
+  clocks:
+    minItems: 1
+    maxItems: 6
+
+  clock-names:
+    minItems: 1
+    maxItems: 6
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cmu
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-imem
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: IMEM TCU clock (from CMU_CMU)
+            - description: IMEM bus clock (from CMU_CMU)
+            - description: IMEM DMA clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_imem_tcuclk
+            - const: dout_cmu_imem_aclk
+            - const: dout_cmu_imem_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-peric
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div4 clock (from CMU_CMU)
+            - description: PERIC shared1 div36 clock (from CMU_CMU)
+            - description: PERIC shared0 div3 TBU clock (from CMU_CMU)
+            - description: PERIC shared0 div20 clock (from CMU_CMU)
+            - description: PERIC shared1 div4 DMAclock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div4
+            - const: dout_cmu_peric_shared1div36
+            - const: dout_cmu_peric_shared0div3_tbuclk
+            - const: dout_cmu_peric_shared0div20
+            - const: dout_cmu_peric_shared1div4_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys0
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div6 clock (from CMU_CMU)
+            - description: FSYS0 shared1 div4 clock (from CMU_CMU)
+            - description: FSYS0 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div6
+            - const: dout_cmu_fsys0_shared1div4
+            - const: dout_cmu_fsys0_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys1
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: FSYS1 shared0 div8 clock (from CMU_CMU)
+            - description: FSYS1 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_fsys1_shared0div8
+            - const: dout_cmu_fsys1_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-mfc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cam_csi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS1
+  - |
+    #include <dt-bindings/clock/fsd-clk.h>
+
+    clock_fsys1: clock-controller@16810000 {
+          compatible = "tesla,fsd-clock-fsys1";
+          reg = <0x16810000 0x3000>;
+          #clock-cells = <1>;
+
+          clocks = <&fin_pll>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
+          clock-names = "fin_pll",
+                        "dout_cmu_fsys1_shared0div8",
+                        "dout_cmu_fsys1_shared0div4";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
new file mode 100644
index 000000000000..66765116aff5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI EHRPWM Time Base Clock
+
+maintainers:
+  - Vignesh Raghavendra <vigneshr@ti.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,am654-ehrpwm-tbclk
+          - ti,am64-epwm-tbclk
+          - ti,am62-epwm-tbclk
+      - const: syscon
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ehrpwm_tbclk: syscon@4140 {
+        compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+        reg = <0x4140 0x18>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce706.txt b/Documentation/devicetree/bindings/clock/ti,cdce706.txt
index 959d96632f5d..21c3ff764788 100644
--- a/Documentation/devicetree/bindings/clock/ti,cdce706.txt
+++ b/Documentation/devicetree/bindings/clock/ti,cdce706.txt
@@ -1,7 +1,7 @@
 Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
 synthesizer/multiplier/divider.
 
-Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf
+Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf
 
 I2C device node required properties:
 - compatible: shall be "ti,cdce706".
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt
index 26544c85202a..df42ab72718f 100644
--- a/Documentation/devicetree/bindings/clock/ti,cdce925.txt
+++ b/Documentation/devicetree/bindings/clock/ti,cdce925.txt
@@ -4,10 +4,10 @@ Reference
 This binding uses the common clock binding[1].
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] http://www.ti.com/product/cdce913
-[3] http://www.ti.com/product/cdce925
-[4] http://www.ti.com/product/cdce937
-[5] http://www.ti.com/product/cdce949
+[2] https://www.ti.com/product/cdce913
+[3] https://www.ti.com/product/cdce925
+[4] https://www.ti.com/product/cdce937
+[5] https://www.ti.com/product/cdce949
 
 The driver provides clock sources for each output Y1 through Y5.
 
diff --git a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
new file mode 100644
index 000000000000..bd8173848253
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,lmk04832.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for the Texas Instruments LMK04832
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  Devicetree binding for the LMK04832, a clock conditioner with JEDEC JESD204B
+  support. The LMK04832 is pin compatible with the LMK0482x family.
+
+  Link to datasheet, https://www.ti.com/lit/ds/symlink/lmk04832.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lmk04832
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  clocks:
+    items:
+      - description: PLL2 reference clock.
+
+  clock-names:
+    items:
+      - const: oscin
+
+  reset-gpios:
+    maxItems: 1
+
+  ti,spi-4wire-rdbk:
+    description: |
+      Select SPI 4wire readback pin configuration.
+      Available readback pins are,
+        CLKin_SEL0 0
+        CLKin_SEL1 1
+        RESET 2
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    default: 1
+
+  ti,vco-hz:
+    description: Optional to set VCO frequency of the PLL in Hertz.
+
+  ti,sysref-ddly:
+    description: SYSREF digital delay value.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8
+    maximum: 8191
+    default: 8
+
+  ti,sysref-mux:
+    description: |
+      SYSREF Mux configuration.
+      Available options are,
+        Normal SYNC 0
+        Re-clocked 1
+        SYSREF Pulser 2
+        SYSREF Continuous 3
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 3
+
+  ti,sync-mode:
+    description: SYNC pin configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    default: 1
+
+  ti,sysref-pulse-count:
+    description:
+      Number of SYSREF pulses to send when SYSREF is not in continuous mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+    default: 4
+
+patternProperties:
+  "@[0-9a-d]+$":
+    type: object
+    description:
+      Child nodes used to configure output clocks.
+
+    properties:
+      reg:
+        description:
+          clock output identifier.
+        minimum: 0
+        maximum: 13
+
+      ti,clkout-fmt:
+        description:
+          Clock output format.
+          Available options are,
+            Powerdown 0x00
+            LVDS 0x01
+            HSDS 6 mA 0x02
+            HSDS 8 mA 0x03
+            LVPECL 1600 mV 0x04
+            LVPECL 2000 mV 0x05
+            LCPECL 0x06
+            CML 16 mA 0x07
+            CML 24 mA 0x08
+            CML 32 mA 0x09
+            CMOS (Off/Inverted) 0x0a
+            CMOS (Normal/Off) 0x0b
+            CMOS (Inverted/Inverted) 0x0c
+            CMOS (Inverted/Normal) 0x0d
+            CMOS (Normal/Inverted) 0x0e
+            CMOS (Normal/Normal) 0x0f
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+
+      ti,clkout-sysref:
+        description:
+          Select SYSREF clock path for output clock.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clocks {
+        lmk04832_oscin: oscin {
+            compatible = "fixed-clock";
+
+            #clock-cells = <0>;
+            clock-frequency = <122880000>;
+            clock-output-names = "lmk04832-oscin";
+        };
+    };
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lmk04832: clock-controller@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reg = <0>;
+
+            compatible = "ti,lmk04832";
+            spi-max-frequency = <781250>;
+
+            reset-gpios = <&gpio_lmk 0 0 0>;
+
+            #clock-cells = <1>;
+            clocks = <&lmk04832_oscin>;
+            clock-names = "oscin";
+
+            ti,spi-4wire-rdbk = <0>;
+            ti,vco-hz = <2457600000>;
+
+            assigned-clocks =
+                <&lmk04832 0>, <&lmk04832 1>,
+                <&lmk04832 2>, <&lmk04832 3>,
+                <&lmk04832 4>,
+                <&lmk04832 6>, <&lmk04832 7>,
+                <&lmk04832 10>, <&lmk04832 11>;
+            assigned-clock-rates =
+                <122880000>, <384000>,
+                <122880000>, <384000>,
+                <122880000>,
+                <153600000>, <384000>,
+                <614400000>, <384000>;
+
+            clkout0@0 {
+                reg = <0>;
+                ti,clkout-fmt = <0x01>; // LVDS
+            };
+
+            clkout1@1 {
+                reg = <1>;
+                ti,clkout-fmt = <0x01>; // LVDS
+                ti,clkout-sysref;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
deleted file mode 100644
index 4e59dc6b1778..000000000000
--- a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Texas Instruments TI-SCI Clocks
-===============================
-
-All clocks on Texas Instruments' SoCs that contain a System Controller,
-are only controlled by this entity. Communication between a host processor
-running an OS and the System Controller happens through a protocol known
-as TI-SCI[1]. This clock implementation plugs into the common clock
-framework and makes use of the TI-SCI protocol on clock API requests.
-
-[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-
-Required properties:
--------------------
-- compatible: Must be "ti,k2g-sci-clk"
-- #clock-cells: Shall be 2.
-  In clock consumers, this cell represents the device ID and clock ID
-  exposed by the PM firmware. The list of valid values for the device IDs
-  and clocks IDs for 66AK2G SoC are documented at
-  http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
-
-Examples:
---------
-
-pmmc: pmmc {
-	compatible = "ti,k2g-sci";
-
-	k2g_clks: clocks {
-		compatible = "ti,k2g-sci-clk";
-		#clock-cells = <2>;
-	};
-};
-
-uart0: serial@2530c00 {
-	compatible = "ns16550a";
-	clocks = <&k2g_clks 0x2c 0>;
-};
diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
new file mode 100644
index 000000000000..0e370289a053
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI clock controller node bindings
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Some TI SoCs contain a system controller (like the Power Management Micro
+  Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
+  the state of the various hardware modules present on the SoC. Communication
+  between the host processor running an OS and the system controller happens
+  through a protocol called TI System Control Interface (TI-SCI protocol).
+
+  This clock controller node uses the TI SCI protocol to perform various clock
+  management of various hardware modules (devices) present on the SoC. This
+  node must be a child node of the associated TI-SCI system controller node.
+
+properties:
+  $nodename:
+    pattern: "^clock-controller$"
+
+  compatible:
+    const: ti,k2g-sci-clk
+
+  "#clock-cells":
+    const: 2
+    description:
+      The two cells represent values that the TI-SCI controller defines.
+
+      The first cell should contain the device ID.
+
+      The second cell should contain the clock ID.
+
+      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      protocol documentation for the values to be used for different devices.
+
+additionalProperties: false
+
+examples:
+  - |
+    k3_clks: clock-controller {
+        compatible = "ti,k2g-sci-clk";
+        #clock-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
index 18af6b9409e3..d20db7974a38 100644
--- a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
+++ b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
@@ -21,6 +21,7 @@ Required properties :
 	       "ti,clkctrl-l4-per"
 	       "ti,clkctrl-l4-secure"
 	       "ti,clkctrl-l4-wkup"
+- clock-output-names : from common clock binding
 - #clock-cells : shall contain 2 with the first entry being the instance
 		 offset from the clock domain base and the second being the
 		 clock index
@@ -32,7 +33,8 @@ Example: Clock controller node on omap 4430:
 	l4per: cm@1400 {
 		cm_l4per@0 {
 			cm_l4per_clkctrl: clock@20 {
-				compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
+				compatible = "ti,clkctrl";
+				clock-output-names = "l4_per";
 				reg = <0x20 0x1b0>;
 				#clock-cells = <2>;
 			};
diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
index cb76b3f2b341..9c6199249ce5 100644
--- a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -17,6 +17,9 @@ Required properties:
 - #clock-cells : from common clock binding; shall be set to 0.
 - clocks : link phandles of clocks within this domain
 
+Optional properties:
+- clock-output-names : from common clock binding.
+
 Examples:
 	dss_clkdm: dss_clkdm {
 		compatible = "ti,clockdomain";
diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
index 5f43c4706b09..33ac7c9ad053 100644
--- a/Documentation/devicetree/bindings/clock/ti/composite.txt
+++ b/Documentation/devicetree/bindings/clock/ti/composite.txt
@@ -27,6 +27,9 @@ Required properties:
 - clocks : link phandles of component clocks
 - #clock-cells : from common clock binding; shall be set to 0.
 
+Optional properties:
+- clock-output-names : from common clock binding.
+
 Examples:
 
 usb_l4_gate_ick: usb_l4_gate_ick {
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
index 36998e184821..c9894538315b 100644
--- a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
@@ -15,7 +15,7 @@ Required properties:
 	- for "ti,da850-pll1", shall be "clksrc"
 
 Optional properties:
-- ti,clkmode-square-wave: Indicates that the the board is supplying a square
+- ti,clkmode-square-wave: Indicates that the board is supplying a square
 	wave input on the OSCIN pin instead of using a crystal oscillator.
 	This property is only valid when compatible = "ti,da850-pll0".
 
diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt
index df57009ff8e7..37a7cb6ad07d 100644
--- a/Documentation/devicetree/bindings/clock/ti/dpll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt
@@ -42,6 +42,11 @@ Required properties:
 	"idlest" - contains the idle status register base address
 	"mult-div1" - contains the multiplier / divider register base address
 	"autoidle" - contains the autoidle register base address (optional)
+	"ssc-deltam" - DPLL supports spread spectrum clocking (SSC), contains
+		       the frequency spreading register base address (optional)
+	"ssc-modfreq" - DPLL supports spread spectrum clocking (SSC), contains
+		        the modulation frequency register base address
+			(optional)
   ti,am3-* dpll types do not have autoidle register
   ti,omap2-* dpll type does not support idlest / autoidle registers
 
@@ -51,6 +56,14 @@ Optional properties:
 	- ti,low-power-stop : DPLL supports low power stop mode, gating output
 	- ti,low-power-bypass : DPLL output matches rate of parent bypass clock
 	- ti,lock : DPLL locks in programmed rate
+	- ti,min-div : the minimum divisor to start from to round the DPLL
+		       target rate
+	- ti,ssc-deltam : DPLL supports spread spectrum clocking, frequency
+			  spreading in permille (10th of a percent)
+	- ti,ssc-modfreq-hz : DPLL supports spread spectrum clocking, spread
+			      spectrum modulation frequency
+	- ti,ssc-downspread : DPLL supports spread spectrum clocking, boolean
+			      to enable the downspread feature
 
 Examples:
 	dpll_core_ck: dpll_core_ck@44e00490 {
@@ -83,3 +96,10 @@ Examples:
 		clocks = <&sys_ck>, <&sys_ck>;
 		reg = <0x0500>, <0x0540>;
 	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
index 21c002d28b9b..68504079f99f 100644
--- a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
+++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
@@ -6,7 +6,7 @@ functional clock but can be configured to provide different clocks.
 ATL can maintain a clock averages to some desired frequency based on the bws/aws
 signals - can compensate the drift between the two ws signal.
 
-In order to provide the support for ATL and it's output clocks (which can be used
+In order to provide the support for ATL and its output clocks (which can be used
 internally within the SoC or external components) two sets of bindings is needed:
 
 Clock tree binding:
diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
index 662b36d53bf0..518e3c142276 100644
--- a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
+++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
@@ -16,6 +16,7 @@ Required properties:
 - clocks: parent clock.
 
 Optional properties:
+- clock-output-names : from common clock binding.
 - ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
   see [2]
 - reg: offset for the autoidle register of this clock, see [2]
diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
index 56d603c1f716..4982615c01b9 100644
--- a/Documentation/devicetree/bindings/clock/ti/gate.txt
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for
 that is used.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
 [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
 
 Required properties:
@@ -36,6 +36,7 @@ Required properties:
 	ti,clkdm-gate-clock type
 
 Optional properties:
+- clock-output-names : from common clock binding.
 - ti,bit-shift : bit shift for programming the clock gate, invalid for
 		 ti,clkdm-gate-clock type
 - ti,set-bit-to-disable : inverts default gate programming. Setting the bit
diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
index 3f4704040140..d3eb5ca92a7f 100644
--- a/Documentation/devicetree/bindings/clock/ti/interface.txt
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate
 clock) and hardware autoidle enable / disable.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
 
 Required properties:
 - compatible : shall be one of:
@@ -28,6 +28,7 @@ Required properties:
 - reg : base address for the control register
 
 Optional properties:
+- clock-output-names : from common clock binding.
 - ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0)
 
 Examples:
diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
index eec8994b9be8..e17425a58621 100644
--- a/Documentation/devicetree/bindings/clock/ti/mux.txt
+++ b/Documentation/devicetree/bindings/clock/ti/mux.txt
@@ -42,6 +42,7 @@ Required properties:
 - reg : register offset for register controlling adjustable mux
 
 Optional properties:
+- clock-output-names : from common clock binding.
 - ti,bit-shift : number of bits to shift the bit-mask, defaults to
   0 if not present
 - ti,index-starts-at-one : valid input select programming starts at 1, not
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml
new file mode 100644
index 000000000000..c56f911fff47
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,clksel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI clksel clock
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: |
+  The TI CLKSEL clocks consist of consist of input clock mux bits, and in some
+  cases also has divider, multiplier and gate bits.
+
+properties:
+  compatible:
+    const: ti,clksel
+
+  reg:
+    maxItems: 1
+    description: The CLKSEL register range
+
+  '#address-cells':
+    enum: [ 0, 1, 2 ]
+
+  '#size-cells':
+    enum: [ 0, 1, 2 ]
+
+  ranges: true
+
+  "#clock-cells":
+    const: 2
+    description: The CLKSEL register and bit offset
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    clksel_gfx_fclk: clock@52c {
+      compatible = "ti,clksel";
+      reg = <0x25c 0x4>;
+      #clock-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml
new file mode 100644
index 000000000000..d36558aa39f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pipllct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770X PLL Controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 PLL controller which supports the PLLs on TMPV770X.
+
+properties:
+  compatible:
+    const: toshiba,tmpv7708-pipllct
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    description: External reference clock (OSC2)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    osc2_clk: osc2-clk {
+      compatible = "fixed-clock";
+      clock-frequency = <20000000>;
+      #clock-cells = <0>;
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pipllct: clock-controller@24220000 {
+            compatible = "toshiba,tmpv7708-pipllct";
+            reg = <0 0x24220000 0 0x820>;
+            #clock-cells = <1>;
+            clocks = <&osc2_clk>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml
new file mode 100644
index 000000000000..081f85b1eb88
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pismu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770x SMU controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 SMU (System Management Unit) which supports the clock
+  and resets on TMPV770x.
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,tmpv7708-pismu
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pismu: syscon@24200000 {
+            compatible = "toshiba,tmpv7708-pismu", "syscon";
+            reg = <0 0x24200000 0 0x2140>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/uniphier-clock.txt b/Documentation/devicetree/bindings/clock/uniphier-clock.txt
deleted file mode 100644
index 7b5f602765fe..000000000000
--- a/Documentation/devicetree/bindings/clock/uniphier-clock.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-UniPhier clock controller
-
-
-System clock
-------------
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-clock"  - for LD4 SoC.
-    "socionext,uniphier-pro4-clock" - for Pro4 SoC.
-    "socionext,uniphier-sld8-clock" - for sLD8 SoC.
-    "socionext,uniphier-pro5-clock" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-clock" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-clock" - for LD11 SoC.
-    "socionext,uniphier-ld20-clock" - for LD20 SoC.
-    "socionext,uniphier-pxs3-clock" - for PXs3 SoC
-- #clock-cells: should be 1.
-
-Example:
-
-	sysctrl@61840000 {
-		compatible = "socionext,uniphier-sysctrl",
-			     "simple-mfd", "syscon";
-		reg = <0x61840000 0x4000>;
-
-		clock {
-			compatible = "socionext,uniphier-ld11-clock";
-			#clock-cells = <1>;
-		};
-
-		other nodes ...
-	};
-
-Provided clocks:
-
- 8: ST DMAC
-12: GIO (Giga bit stream I/O)
-14: USB3 ch0 host
-15: USB3 ch1 host
-16: USB3 ch0 PHY0
-17: USB3 ch0 PHY1
-20: USB3 ch1 PHY0
-21: USB3 ch1 PHY1
-
-
-Media I/O (MIO) clock, SD clock
--------------------------------
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-mio-clock"  - for LD4 SoC.
-    "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC.
-    "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC.
-    "socionext,uniphier-pro5-sd-clock"  - for Pro5 SoC.
-    "socionext,uniphier-pxs2-sd-clock"  - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-mio-clock" - for LD11 SoC.
-    "socionext,uniphier-ld20-sd-clock"  - for LD20 SoC.
-    "socionext,uniphier-pxs3-sd-clock"  - for PXs3 SoC
-- #clock-cells: should be 1.
-
-Example:
-
-	mioctrl@59810000 {
-		compatible = "socionext,uniphier-mioctrl",
-			     "simple-mfd", "syscon";
-		reg = <0x59810000 0x800>;
-
-		clock {
-			compatible = "socionext,uniphier-ld11-mio-clock";
-			#clock-cells = <1>;
-		};
-
-		other nodes ...
-	};
-
-Provided clocks:
-
- 0: SD ch0 host
- 1: eMMC host
- 2: SD ch1 host
- 7: MIO DMAC
- 8: USB2 ch0 host
- 9: USB2 ch1 host
-10: USB2 ch2 host
-12: USB2 ch0 PHY
-13: USB2 ch1 PHY
-14: USB2 ch2 PHY
-
-
-Peripheral clock
-----------------
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-clock"  - for LD4 SoC.
-    "socionext,uniphier-pro4-peri-clock" - for Pro4 SoC.
-    "socionext,uniphier-sld8-peri-clock" - for sLD8 SoC.
-    "socionext,uniphier-pro5-peri-clock" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-peri-clock" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-peri-clock" - for LD11 SoC.
-    "socionext,uniphier-ld20-peri-clock" - for LD20 SoC.
-    "socionext,uniphier-pxs3-peri-clock" - for PXs3 SoC
-- #clock-cells: should be 1.
-
-Example:
-
-	perictrl@59820000 {
-		compatible = "socionext,uniphier-perictrl",
-			     "simple-mfd", "syscon";
-		reg = <0x59820000 0x200>;
-
-		clock {
-			compatible = "socionext,uniphier-ld11-peri-clock";
-			#clock-cells = <1>;
-		};
-
-		other nodes ...
-	};
-
-Provided clocks:
-
- 0: UART ch0
- 1: UART ch1
- 2: UART ch2
- 3: UART ch3
- 4: I2C ch0
- 5: I2C ch1
- 6: I2C ch2
- 7: I2C ch3
- 8: I2C ch4
- 9: I2C ch5
-10: I2C ch6
diff --git a/Documentation/devicetree/bindings/clock/ux500.txt b/Documentation/devicetree/bindings/clock/ux500.txt
deleted file mode 100644
index e52bd4b72348..000000000000
--- a/Documentation/devicetree/bindings/clock/ux500.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Clock bindings for ST-Ericsson Ux500 clocks
-
-Required properties :
-- compatible : shall contain only one of the following:
-  "stericsson,u8500-clks"
-  "stericsson,u8540-clks"
-  "stericsson,u9540-clks"
-- reg : shall contain base register location and length for
-  CLKRST1, 2, 3, 5, and 6 in an array. Note the absence of
-  CLKRST4, which does not exist.
-
-Required subnodes:
-- prcmu-clock: a subnode with one clock cell for PRCMU (power,
-  reset, control unit) clocks. The cell indicates which PRCMU
-  clock in the prcmu-clock node the consumer wants to use.
-- prcc-periph-clock: a subnode with two clock cells for
-  PRCC (programmable reset- and clock controller) peripheral clocks.
-  The first cell indicates which PRCC block the consumer
-  wants to use, possible values are 1, 2, 3, 5, 6. The second
-  cell indicates which clock inside the PRCC block it wants,
-  possible values are 0 thru 31.
-- prcc-kernel-clock: a subnode with two clock cells for
-  PRCC (programmable reset- and clock controller) kernel clocks
-  The first cell indicates which PRCC block the consumer
-  wants to use, possible values are 1, 2, 3, 5, 6. The second
-  cell indicates which clock inside the PRCC block it wants,
-  possible values are 0 thru 31.
-- rtc32k-clock: a subnode with zero clock cells for the 32kHz
-  RTC clock.
-- smp-twd-clock: a subnode for the ARM SMP Timer Watchdog cluster
-  with zero clock cells.
-
-Example:
-
-clocks {
-	compatible = "stericsson,u8500-clks";
-	/*
-	 * Registers for the CLKRST block on peripheral
-	 * groups 1, 2, 3, 5, 6,
-	 */
-	reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
-	    <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
-	    <0xa03cf000 0x1000>;
-
-	prcmu_clk: prcmu-clock {
-		#clock-cells = <1>;
-	};
-
-	prcc_pclk: prcc-periph-clock {
-		#clock-cells = <2>;
-	};
-
-	prcc_kclk: prcc-kernel-clock {
-		#clock-cells = <2>;
-	};
-
-	rtc_clk: rtc32k-clock {
-		#clock-cells = <0>;
-	};
-
-	smp_twd_clk: smp-twd-clock {
-		#clock-cells = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
new file mode 100644
index 000000000000..634b7b964606
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/xlnx,clocking-wizard.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xilinx clocking wizard
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+
+description:
+  The clocking wizard is a soft ip clocking block of Xilinx versal. It
+  reads required input clock frequencies from the devicetree and acts as clock
+  clock output.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,clocking-wizard
+      - xlnx,clocking-wizard-v5.2
+      - xlnx,clocking-wizard-v6.0
+
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: clock input
+      - description: axi clock
+
+  clock-names:
+    items:
+      - const: clk_in1
+      - const: s_axi_aclk
+
+
+  xlnx,speed-grade:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+    description:
+      Speed grade of the device. Higher the speed grade faster is the FPGA device.
+
+  xlnx,nr-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
+    description:
+      Number of outputs.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - xlnx,speed-grade
+  - xlnx,nr-outputs
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@b0000000  {
+        compatible = "xlnx,clocking-wizard";
+        reg = <0xb0000000 0x10000>;
+        #clock-cells = <1>;
+        xlnx,speed-grade = <1>;
+        xlnx,nr-outputs = <6>;
+        clock-names = "clk_in1", "s_axi_aclk";
+        clocks = <&clkc 15>, <&clkc 15>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt
deleted file mode 100644
index 5c91c9e4f1be..000000000000
--- a/Documentation/devicetree/bindings/clock/zx296702-clk.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Device Tree Clock bindings for ZTE zx296702
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"zte,zx296702-topcrm-clk":
-		zx296702 top clock selection, divider and gating
-
-	"zte,zx296702-lsp0crpm-clk" and
-	"zte,zx296702-lsp1crpm-clk":
-		zx296702 device level clock selection and gating
-
-- reg: Address and length of the register set
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
-for the full list of zx296702 clock IDs.
-
-
-topclk: topcrm@09800000 {
-        compatible = "zte,zx296702-topcrm-clk";
-        reg = <0x09800000 0x1000>;
-        #clock-cells = <1>;
-};
-
-uart0: serial@09405000 {
-        compatible = "zte,zx296702-uart";
-        reg = <0x09405000 0x1000>;
-        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&lsp1clk ZX296702_UART0_PCLK>;
-};
diff --git a/Documentation/devicetree/bindings/clock/zx296718-clk.txt b/Documentation/devicetree/bindings/clock/zx296718-clk.txt
deleted file mode 100644
index 3a46bf0b2540..000000000000
--- a/Documentation/devicetree/bindings/clock/zx296718-clk.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Device Tree Clock bindings for ZTE zx296718
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"zte,zx296718-topcrm":
-		zx296718 top clock selection, divider and gating
-
-	"zte,zx296718-lsp0crm" and
-	"zte,zx296718-lsp1crm":
-		zx296718 device level clock selection and gating
-
-	"zte,zx296718-audiocrm":
-		zx296718 audio clock selection, divider and gating
-
-- reg: Address and length of the register set
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296718-clock.h
-for the full list of zx296718 clock IDs.
-
-
-topclk: topcrm@1461000 {
-        compatible = "zte,zx296718-topcrm-clk";
-        reg = <0x01461000 0x1000>;
-        #clock-cells = <1>;
-};
-
-usbphy0:usb-phy0 {
-	compatible = "zte,zx296718-usb-phy";
-	#phy-cells = <0>;
-	clocks = <&topclk USB20_PHY_CLK>;
-	clock-names = "phyclk";
-};
diff --git a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
deleted file mode 100644
index 22256e295a7a..000000000000
--- a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Samsung micro-USB 11-pin connector
-==================================
-
-Samsung micro-USB 11-pin connector is an extension of micro-USB connector.
-It is present in multiple Samsung mobile devices.
-It has additional pins to route MHL traffic simultanously with USB.
-
-The bindings are superset of usb-connector bindings for micro-USB connector[1].
-
-Required properties:
-- compatible: must be: "samsung,usb-connector-11pin", "usb-b-connector",
-- type: must be "micro".
-
-Required nodes:
-- any data bus to the connector should be modeled using the OF graph bindings
-  specified in bindings/graph.txt, unless the bus is between parent node and
-  the connector. Since single connector can have multpile data buses every bus
-  has assigned OF graph port number as follows:
-    0: High Speed (HS),
-    3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB.
-
-[1]: bindings/connector/usb-connector.txt
-
-Example
--------
-
-Micro-USB connector with HS lines routed via controller (MUIC) and MHL lines
-connected to HDMI-MHL bridge (sii8620):
-
-muic-max77843@66 {
-	...
-	usb_con: connector {
-		compatible = "samsung,usb-connector-11pin", "usb-b-connector";
-		label = "micro-USB";
-		type = "micro";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@3 {
-				reg = <3>;
-				usb_con_mhl: endpoint {
-					remote-endpoint = <&sii8620_mhl>;
-				};
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt
deleted file mode 100644
index 88578ac1a8a7..000000000000
--- a/Documentation/devicetree/bindings/connector/usb-connector.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-USB Connector
-=============
-
-A USB connector node represents a physical USB connector. It should be
-a child of a USB interface controller.
-
-Required properties:
-- compatible: describes type of the connector, must be one of:
-    "usb-a-connector",
-    "usb-b-connector",
-    "usb-c-connector".
-
-Optional properties:
-- label: symbolic name for the connector,
-- type: size of the connector, should be specified in case of USB-A, USB-B
-  non-fullsize connectors: "mini", "micro".
-- self-powered: Set this property if the usb device that has its own power
-  source.
-
-Optional properties for usb-b-connector:
-- id-gpios: an input gpio for USB ID pin.
-- vbus-gpios: an input gpio for USB VBUS pin, used to detect presence of
-  VBUS 5V.
-  see gpio/gpio.txt.
-- vbus-supply: a phandle to the regulator for USB VBUS if needed when host
-  mode or dual role mode is supported.
-  Particularly, if use an output GPIO to control a VBUS regulator, should
-  model it as a regulator.
-  see regulator/fixed-regulator.yaml
-- pinctrl-names : a pinctrl state named "default" is optional
-- pinctrl-0 : pin control group
-  see pinctrl/pinctrl-bindings.txt
-
-Optional properties for usb-c-connector:
-- power-role: should be one of "source", "sink" or "dual"(DRP) if typec
-  connector has power support.
-- try-power-role: preferred power role if "dual"(DRP) can support Try.SNK
-  or Try.SRC, should be "sink" for Try.SNK or "source" for Try.SRC.
-- data-role: should be one of "host", "device", "dual"(DRD) if typec
-  connector supports USB data.
-
-Required properties for usb-c-connector with power delivery support:
-- source-pdos: An array of u32 with each entry providing supported power
-  source data object(PDO), the detailed bit definitions of PDO can be found
-  in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
-  Source_Capabilities Message, the order of each entry(PDO) should follow
-  the PD spec chapter 6.4.1. Required for power source and power dual role.
-  User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
-  defined in dt-bindings/usb/pd.h.
-- sink-pdos: An array of u32 with each entry providing supported power
-  sink data object(PDO), the detailed bit definitions of PDO can be found
-  in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
-  Sink Capabilities Message, the order of each entry(PDO) should follow
-  the PD spec chapter 6.4.1. Required for power sink and power dual role.
-  User can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
-  in dt-bindings/usb/pd.h.
-- op-sink-microwatt: Sink required operating power in microwatt, if source
-  can't offer the power, Capability Mismatch is set. Required for power
-  sink and power dual role.
-
-Required nodes:
-- any data bus to the connector should be modeled using the OF graph bindings
-  specified in bindings/graph.txt, unless the bus is between parent node and
-  the connector. Since single connector can have multiple data buses every bus
-  has assigned OF graph port number as follows:
-    0: High Speed (HS), present in all connectors,
-    1: Super Speed (SS), present in SS capable connectors,
-    2: Sideband use (SBU), present in USB-C.
-
-Examples
---------
-
-1. Micro-USB connector with HS lines routed via controller (MUIC):
-
-muic-max77843@66 {
-	...
-	usb_con: connector {
-		compatible = "usb-b-connector";
-		label = "micro-USB";
-		type = "micro";
-	};
-};
-
-2. USB-C connector attached to CC controller (s2mm005), HS lines routed
-to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
-DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
-
-ccic: s2mm005@33 {
-	...
-	usb_con: connector {
-		compatible = "usb-c-connector";
-		label = "USB-C";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				usb_con_hs: endpoint {
-					remote-endpoint = <&max77865_usbc_hs>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				usb_con_ss: endpoint {
-					remote-endpoint = <&usbdrd_phy_ss>;
-				};
-			};
-			port@2 {
-				reg = <2>;
-				usb_con_sbu: endpoint {
-					remote-endpoint = <&dp_aux>;
-				};
-			};
-		};
-	};
-};
-
-3. USB-C connector attached to a typec port controller(ptn5110), which has
-power delivery support and enables drp.
-
-typec: ptn5110@50 {
-	...
-	usb_con: connector {
-		compatible = "usb-c-connector";
-		label = "USB-C";
-		power-role = "dual";
-		try-power-role = "sink";
-		source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
-		sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
-			     PDO_VAR(5000, 12000, 2000)>;
-		op-sink-microwatt = <10000000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
new file mode 100644
index 000000000000..ae515651fc6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -0,0 +1,393 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/connector/usb-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB Connector
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  A USB connector node represents a physical USB connector. It should be a child
+  of a USB interface controller or a separate node when it is attached to both
+  MUX and USB interface controller.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - usb-a-connector
+          - usb-b-connector
+          - usb-c-connector
+
+      - items:
+          - const: gpio-usb-b-connector
+          - const: usb-b-connector
+
+      - items:
+          - const: samsung,usb-connector-11pin
+          - const: usb-b-connector
+
+  label:
+    description: Symbolic name for the connector.
+
+  type:
+    description: Size of the connector, should be specified in case of
+      non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
+      connectors.
+    $ref: /schemas/types.yaml#/definitions/string
+
+    enum:
+      - mini
+      - micro
+
+  self-powered:
+    description: Set this property if the USB device has its own power source.
+    type: boolean
+
+  # The following are optional properties for "usb-b-connector".
+  id-gpios:
+    description: An input gpio for USB ID pin.
+    maxItems: 1
+
+  vbus-gpios:
+    description: An input gpio for USB VBus pin, used to detect presence of
+      VBUS 5V.
+    maxItems: 1
+
+  vbus-supply:
+    description: A phandle to the regulator for USB VBUS if needed when host
+      mode or dual role mode is supported.
+      Particularly, if use an output GPIO to control a VBUS regulator, should
+      model it as a regulator. See bindings/regulator/fixed-regulator.yaml
+
+  # The following are optional properties for "usb-c-connector".
+  power-role:
+    description: Determines the power role that the Type C connector will
+      support. "dual" refers to Dual Role Port (DRP).
+    $ref: /schemas/types.yaml#/definitions/string
+
+    enum:
+      - source
+      - sink
+      - dual
+
+  try-power-role:
+    description: Preferred power role.
+    $ref: /schemas/types.yaml#/definitions/string
+
+    enum:
+      - source
+      - sink
+      - dual
+
+  data-role:
+    description: Data role if Type C connector supports USB data. "dual" refers
+      Dual Role Device (DRD).
+    $ref: /schemas/types.yaml#/definitions/string
+
+    enum:
+      - host
+      - device
+      - dual
+
+  typec-power-opmode:
+    description: Determines the power operation mode that the Type C connector
+      will support and will advertise through CC pins when it has no power
+      delivery support.
+      - "default" corresponds to default USB voltage and current defined by the
+        USB 2.0 and USB 3.2 specifications, 5V 500mA for USB 2.0 ports and
+        5V 900mA or 1500mA for USB 3.2 ports in single-lane or dual-lane
+        operation respectively.
+      - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
+        Type-C Cable and Connector specification, when Power Delivery is not
+        supported.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - default
+      - 1.5A
+      - 3.0A
+
+  pd-disable:
+    description: Set this property if the Type-C connector has no power delivery support.
+    type: boolean
+
+  # The following are optional properties for "usb-c-connector" with power
+  # delivery support.
+  source-pdos:
+    description: An array of u32 with each entry providing supported power
+      source data object(PDO), the detailed bit definitions of PDO can be found
+      in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
+      Source_Capabilities Message, the order of each entry(PDO) should follow
+      the PD spec chapter 6.4.1. Required for power source and power dual role.
+      User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
+      defined in dt-bindings/usb/pd.h.
+    minItems: 1
+    maxItems: 7
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  sink-pdos:
+    description: An array of u32 with each entry providing supported power sink
+      data object(PDO), the detailed bit definitions of PDO can be found in
+      "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
+      Sink Capabilities Message, the order of each entry(PDO) should follow the
+      PD spec chapter 6.4.1. Required for power sink and power dual role. User
+      can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
+      in dt-bindings/usb/pd.h.
+    minItems: 1
+    maxItems: 7
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  sink-vdos:
+    description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),
+      providing additional information corresponding to the product, the detailed bit
+      definitions and the order of each VDO can be found in
+      "USB Power Delivery Specification Revision 3.0, Version 2.0 + ECNs 2020-12-10"
+      chapter 6.4.4.3.1 Discover Identity. User can specify the VDO array via
+      VDO_IDH/_CERT/_PRODUCT/_UFP/_DFP/_PCABLE/_ACABLE(1/2)/_VPD() defined in
+      dt-bindings/usb/pd.h.
+    minItems: 3
+    maxItems: 6
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  sink-vdos-v1:
+    description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),
+      providing additional information corresponding to the product, the detailed bit
+      definitions and the order of each VDO can be found in
+      "USB Power Delivery Specification Revision 2.0, Version 1.3" chapter 6.4.4.3.1 Discover
+      Identity. User can specify the VDO array via VDO_IDH/_CERT/_PRODUCT/_CABLE/_AMA defined in
+      dt-bindings/usb/pd.h.
+    minItems: 3
+    maxItems: 6
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  op-sink-microwatt:
+    description: Sink required operating power in microwatt, if source can't
+      offer the power, Capability Mismatch is set. Required for power sink and
+      power dual role.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: OF graph bindings modeling any data bus to the connector
+      unless the bus is between parent node and the connector. Since a single
+      connector can have multiple data buses every bus has an assigned OF graph
+      port number as described below.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: High Speed (HS), present in all connectors.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS), present in SS capable connectors.
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Sideband Use (SBU), present in USB-C. This describes the
+          alternate mode connection of which SBU is a part.
+
+    required:
+      - port@0
+
+  new-source-frs-typec-current:
+    description: Initial current capability of the new source when vSafe5V
+      is applied during PD3.0 Fast Role Swap. "Table 6-14 Fixed Supply PDO - Sink"
+      of "USB Power Delivery Specification Revision 3.0, Version 1.2" provides the
+      different power levels and "6.4.1.3.1.6 Fast Role Swap USB Type-C Current"
+      provides a detailed description of the field. The sink PDO from current source
+      reflects the current source's(i.e. transmitter of the FRS signal) power
+      requirement during fr swap. The current sink (i.e. receiver of the FRS signal),
+      a.k.a new source, should check if it will be able to satisfy the current source's,
+      new sink's, requirement during frswap before enabling the frs signal reception.
+      This property refers to maximum current capability that the current sink can
+      satisfy. During FRS, VBUS voltage is at 5V, as the partners are in implicit
+      contract, hence, the power level is only a function of the current capability.
+      "1" refers to default USB power level as described by "Table 6-14 Fixed Supply PDO - Sink".
+      "2" refers to 1.5A@5V.
+      "3" refers to 3.0A@5V.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+
+  slow-charger-loop:
+    description: Allows PMIC charger loops which are slow(i.e. cannot meet the 15ms deadline) to
+      still comply to pSnkStby i.e Maximum power that can be consumed by sink while in Sink Standby
+      state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification
+      Revision 3.0, Version 1.2. When the property is set, the port requests pSnkStby(2.5W -
+      5V@500mA) upon entering SNK_DISCOVERY(instead of 3A or the 1.5A, Rp current advertised, during
+      SNK_DISCOVERY) and the actual currrent limit after reception of PS_Ready for PD link or during
+      SNK_READY for non-pd link.
+    type: boolean
+
+dependencies:
+  sink-vdos-v1: [ 'sink-vdos' ]
+  sink-vdos: [ 'sink-vdos-v1' ]
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: gpio-usb-b-connector
+    then:
+      anyOf:
+        - required:
+            - vbus-gpios
+        - required:
+            - id-gpios
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,usb-connector-11pin
+    then:
+      properties:
+        type:
+          const: micro
+
+anyOf:
+  - not:
+      required:
+        - typec-power-opmode
+        - new-source-frs-typec-current
+
+additionalProperties: true
+
+examples:
+  # Micro-USB connector with HS lines routed via controller (MUIC).
+  - |
+    muic-max77843 {
+        usb_con1: connector {
+            compatible = "usb-b-connector";
+            label = "micro-USB";
+            type = "micro";
+        };
+    };
+
+  # USB-C connector attached to CC controller (s2mm005), HS lines routed
+  # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
+  # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
+  - |
+    ccic: s2mm005 {
+        usb_con2: connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    usb_con_hs: endpoint {
+                        remote-endpoint = <&max77865_usbc_hs>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    usb_con_ss: endpoint {
+                        remote-endpoint = <&usbdrd_phy_ss>;
+                    };
+                };
+                port@2 {
+                    reg = <2>;
+                    usb_con_sbu: endpoint {
+                        remote-endpoint = <&dp_aux>;
+                    };
+                };
+            };
+        };
+    };
+
+  # USB-C connector attached to a typec port controller(ptn5110), which has
+  # power delivery support and enables drp.
+  - |
+    #include <dt-bindings/usb/pd.h>
+    typec: ptn5110 {
+        usb_con3: connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            power-role = "dual";
+            try-power-role = "sink";
+            source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+            sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
+                         PDO_VAR(5000, 12000, 2000)>;
+            op-sink-microwatt = <10000000>;
+        };
+    };
+
+  # USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220)
+  # with SS 2:1 MUX. HS lines routed to SoC, SS lines routed to the MUX and
+  # the output of MUX is connected to the SoC.
+  - |
+    connector {
+        compatible = "usb-c-connector";
+        label = "USB-C";
+        data-role = "dual";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                hs_ep: endpoint {
+                    remote-endpoint = <&usb3_hs_ep>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                ss_ep: endpoint {
+                    remote-endpoint = <&hd3ss3220_in_ep>;
+                };
+            };
+        };
+    };
+
+  # USB connector with GPIO control lines
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        connector {
+            compatible = "gpio-usb-b-connector", "usb-b-connector";
+            type = "micro";
+            id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
+            vbus-supply = <&usb_p0_vbus>;
+        };
+    };
+
+  # Micro-USB connector with HS lines routed via controller (MUIC) and MHL
+  # lines connected to HDMI-MHL bridge (sii8620) on Samsung Exynos5433-based
+  # mobile phone
+  - |
+    muic-max77843 {
+        usb_con4: connector {
+            compatible = "samsung,usb-connector-11pin", "usb-b-connector";
+            label = "micro-USB";
+            type = "micro";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    muic_to_usb: endpoint {
+                        remote-endpoint = <&usb_to_muic>;
+                    };
+                };
+                port@3 {
+                    reg = <3>;
+                    usb_con_mhl: endpoint {
+                        remote-endpoint = <&sii8620_mhl>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/counter/interrupt-counter.yaml b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
new file mode 100644
index 000000000000..fd075d104631
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/interrupt-counter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt counter
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  A generic interrupt counter to measure interrupt frequency. It was developed
+  and used for agricultural devices to measure rotation speed of wheels or
+  other tools. Since the direction of rotation is not important, only one
+  signal line is needed.
+  Interrupts or gpios are required. If both are defined, the interrupt will
+  take precedence for counting interrupts.
+
+properties:
+  compatible:
+    const: interrupt-counter
+
+  interrupts:
+    maxItems: 1
+
+  gpios:
+    maxItems: 1
+
+required:
+  - compatible
+
+anyOf:
+  - required: [ interrupts-extended ]
+  - required: [ interrupts ]
+  - required: [ gpios ]
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    counter-0 {
+        compatible = "interrupt-counter";
+        interrupts-extended = <&gpio 0 IRQ_TYPE_EDGE_RISING>;
+    };
+
+    counter-1 {
+        compatible = "interrupt-counter";
+        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+    };
+
+    counter-2 {
+        compatible = "interrupt-counter";
+        interrupts-extended = <&gpio 2 IRQ_TYPE_EDGE_RISING>;
+        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
new file mode 100644
index 000000000000..4e0b2d2b303e
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Capture (eCAP) Module
+
+maintainers:
+  - Julien Panis <jpanis@baylibre.com>
+
+description: |
+  The eCAP module resources can be used to capture timestamps
+  on input signal events (falling/rising edges).
+
+properties:
+  compatible:
+    const: ti,am62-ecap-capture
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        capture@23100000 { /* eCAP in capture mode on am62x */
+            compatible = "ti,am62-ecap-capture";
+            reg = <0x00 0x23100000 0x00 0x100>;
+            interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+            power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 51 0>;
+            clock-names = "fck";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/cpu/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml
new file mode 100644
index 000000000000..fa4d4142ac93
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml
@@ -0,0 +1,855 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpu/idle-states.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Idle states binding description
+
+maintainers:
+  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+  - Anup Patel <anup@brainfault.org>
+
+description: |+
+  ==========================================
+  1 - Introduction
+  ==========================================
+
+  ARM and RISC-V systems contain HW capable of managing power consumption
+  dynamically, where cores can be put in different low-power states (ranging
+  from simple wfi to power gating) according to OS PM policies. The CPU states
+  representing the range of dynamic idle states that a processor can enter at
+  run-time, can be specified through device tree bindings representing the
+  parameters required to enter/exit specific idle states on a given processor.
+
+  ==========================================
+  2 - ARM idle states
+  ==========================================
+
+  According to the Server Base System Architecture document (SBSA, [3]), the
+  power states an ARM CPU can be put into are identified by the following list:
+
+  - Running
+  - Idle_standby
+  - Idle_retention
+  - Sleep
+  - Off
+
+  The power states described in the SBSA document define the basic CPU states on
+  top of which ARM platforms implement power management schemes that allow an OS
+  PM implementation to put the processor in different idle states (which include
+  states listed above; "off" state is not an idle state since it does not have
+  wake-up capabilities, hence it is not considered in this document).
+
+  Idle state parameters (e.g. entry latency) are platform specific and need to
+  be characterized with bindings that provide the required information to OS PM
+  code so that it can build the required tables and use them at runtime.
+
+  The device tree binding definition for ARM idle states is the subject of this
+  document.
+
+  ==========================================
+  3 - RISC-V idle states
+  ==========================================
+
+  On RISC-V systems, the HARTs (or CPUs) [6] can be put in platform specific
+  suspend (or idle) states (ranging from simple WFI, power gating, etc). The
+  RISC-V SBI v0.3 (or higher) [7] hart state management extension provides a
+  standard mechanism for OS to request HART state transitions.
+
+  The platform specific suspend (or idle) states of a hart can be either
+  retentive or non-rententive in nature. A retentive suspend state will
+  preserve HART registers and CSR values for all privilege modes whereas
+  a non-retentive suspend state will not preserve HART registers and CSR
+  values.
+
+  ===========================================
+  4 - idle-states definitions
+  ===========================================
+
+  Idle states are characterized for a specific system through a set of
+  timing and energy related properties, that underline the HW behaviour
+  triggered upon idle states entry and exit.
+
+  The following diagram depicts the CPU execution phases and related timing
+  properties required to enter and exit an idle state:
+
+  ..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__..
+              |          |           |          |          |
+
+              |<------ entry ------->|
+              |       latency        |
+                                                |<- exit ->|
+                                                |  latency |
+              |<-------- min-residency -------->|
+                         |<-------  wakeup-latency ------->|
+
+      Diagram 1: CPU idle state execution phases
+
+  EXEC:  Normal CPU execution.
+
+  PREP:  Preparation phase before committing the hardware to idle mode
+    like cache flushing. This is abortable on pending wake-up
+    event conditions. The abort latency is assumed to be negligible
+    (i.e. less than the ENTRY + EXIT duration). If aborted, CPU
+    goes back to EXEC. This phase is optional. If not abortable,
+    this should be included in the ENTRY phase instead.
+
+  ENTRY:  The hardware is committed to idle mode. This period must run
+    to completion up to IDLE before anything else can happen.
+
+  IDLE:  This is the actual energy-saving idle period. This may last
+    between 0 and infinite time, until a wake-up event occurs.
+
+  EXIT:  Period during which the CPU is brought back to operational
+    mode (EXEC).
+
+  entry-latency: Worst case latency required to enter the idle state. The
+  exit-latency may be guaranteed only after entry-latency has passed.
+
+  min-residency: Minimum period, including preparation and entry, for a given
+  idle state to be worthwhile energywise.
+
+  wakeup-latency: Maximum delay between the signaling of a wake-up event and the
+  CPU being able to execute normal code again. If not specified, this is assumed
+  to be entry-latency + exit-latency.
+
+  These timing parameters can be used by an OS in different circumstances.
+
+  An idle CPU requires the expected min-residency time to select the most
+  appropriate idle state based on the expected expiry time of the next IRQ
+  (i.e. wake-up) that causes the CPU to return to the EXEC phase.
+
+  An operating system scheduler may need to compute the shortest wake-up delay
+  for CPUs in the system by detecting how long will it take to get a CPU out
+  of an idle state, e.g.:
+
+  wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0)
+
+  In other words, the scheduler can make its scheduling decision by selecting
+  (e.g. waking-up) the CPU with the shortest wake-up delay.
+  The wake-up delay must take into account the entry latency if that period
+  has not expired. The abortable nature of the PREP period can be ignored
+  if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than
+  the worst case since it depends on the CPU operating conditions, i.e. caches
+  state).
+
+  An OS has to reliably probe the wakeup-latency since some devices can enforce
+  latency constraint guarantees to work properly, so the OS has to detect the
+  worst case wake-up latency it can incur if a CPU is allowed to enter an
+  idle state, and possibly to prevent that to guarantee reliable device
+  functioning.
+
+  The min-residency time parameter deserves further explanation since it is
+  expressed in time units but must factor in energy consumption coefficients.
+
+  The energy consumption of a cpu when it enters a power state can be roughly
+  characterised by the following graph:
+
+                 |
+                 |
+                 |
+             e   |
+             n   |                                      /---
+             e   |                               /------
+             r   |                        /------
+             g   |                  /-----
+             y   |           /------
+                 |       ----
+                 |      /|
+                 |     / |
+                 |    /  |
+                 |   /   |
+                 |  /    |
+                 | /     |
+                 |/      |
+            -----|-------+----------------------------------
+                0|       1                              time(ms)
+
+      Graph 1: Energy vs time example
+
+  The graph is split in two parts delimited by time 1ms on the X-axis.
+  The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope
+  and denotes the energy costs incurred while entering and leaving the idle
+  state.
+  The graph curve in the area delimited by X-axis values = {x | x > 1ms } has
+  shallower slope and essentially represents the energy consumption of the idle
+  state.
+
+  min-residency is defined for a given idle state as the minimum expected
+  residency time for a state (inclusive of preparation and entry) after
+  which choosing that state become the most energy efficient option. A good
+  way to visualise this, is by taking the same graph above and comparing some
+  states energy consumptions plots.
+
+  For sake of simplicity, let's consider a system with two idle states IDLE1,
+  and IDLE2:
+
+            |
+            |
+            |
+            |                                                  /-- IDLE1
+         e  |                                              /---
+         n  |                                         /----
+         e  |                                     /---
+         r  |                                /-----/--------- IDLE2
+         g  |                    /-------/---------
+         y  |        ------------    /---|
+            |       /           /----    |
+            |      /        /---         |
+            |     /    /----             |
+            |    / /---                  |
+            |   ---                      |
+            |  /                         |
+            | /                          |
+            |/                           |                  time
+         ---/----------------------------+------------------------
+            |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy
+                                         |
+                                  IDLE2-min-residency
+
+      Graph 2: idle states min-residency example
+
+  In graph 2 above, that takes into account idle states entry/exit energy
+  costs, it is clear that if the idle state residency time (i.e. time till next
+  wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state
+  choice energywise.
+
+  This is mainly down to the fact that IDLE1 entry/exit energy costs are lower
+  than IDLE2.
+
+  However, the lower power consumption (i.e. shallower energy curve slope) of
+  idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy
+  efficient.
+
+  The time at which IDLE2 becomes more energy efficient than IDLE1 (and other
+  shallower states in a system with multiple idle states) is defined
+  IDLE2-min-residency and corresponds to the time when energy consumption of
+  IDLE1 and IDLE2 states breaks even.
+
+  The definitions provided in this section underpin the idle states
+  properties specification that is the subject of the following sections.
+
+  ===========================================
+  5 - idle-states node
+  ===========================================
+
+  The processor idle states are defined within the idle-states node, which is
+  a direct child of the cpus node [1] and provides a container where the
+  processor idle states, defined as device tree nodes, are listed.
+
+  On ARM systems, it is a container of processor idle states nodes. If the
+  system does not provide CPU power management capabilities, or the processor
+  just supports idle_standby, an idle-states node is not required.
+
+  ===========================================
+  6 - References
+  ===========================================
+
+  [1] ARM Linux Kernel documentation - CPUs bindings
+      Documentation/devicetree/bindings/arm/cpus.yaml
+
+  [2] ARM Linux Kernel documentation - PSCI bindings
+      Documentation/devicetree/bindings/arm/psci.yaml
+
+  [3] ARM Server Base System Architecture (SBSA)
+      http://infocenter.arm.com/help/index.jsp
+
+  [4] ARM Architecture Reference Manuals
+      http://infocenter.arm.com/help/index.jsp
+
+  [5] ARM Linux Kernel documentation - Booting AArch64 Linux
+      Documentation/arm64/booting.rst
+
+  [6] RISC-V Linux Kernel documentation - CPUs bindings
+      Documentation/devicetree/bindings/riscv/cpus.yaml
+
+  [7] RISC-V Supervisor Binary Interface (SBI)
+      http://github.com/riscv/riscv-sbi-doc/riscv-sbi.adoc
+
+properties:
+  $nodename:
+    const: idle-states
+
+  entry-method:
+    description: |
+      Usage and definition depend on ARM architecture version.
+
+      On ARM v8 64-bit this property is required.
+      On ARM 32-bit systems this property is optional
+
+      This assumes that the "enable-method" property is set to "psci" in the cpu
+      node[5] that is responsible for setting up CPU idle management in the OS
+      implementation.
+    const: psci
+
+patternProperties:
+  "^(cpu|cluster)-":
+    type: object
+    description: |
+      Each state node represents an idle state description and must be defined
+      as follows.
+
+      The idle state entered by executing the wfi instruction (idle_standby
+      SBSA,[3][4]) is considered standard on all ARM and RISC-V platforms and
+      therefore must not be listed.
+
+      In addition to the properties listed above, a state node may require
+      additional properties specific to the entry-method defined in the
+      idle-states node. Please refer to the entry-method bindings
+      documentation for properties definitions.
+
+    properties:
+      compatible:
+        enum:
+          - arm,idle-state
+          - riscv,idle-state
+
+      arm,psci-suspend-param:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          power_state parameter to pass to the ARM PSCI suspend call.
+
+          Device tree nodes that require usage of PSCI CPU_SUSPEND function
+          (i.e. idle states node with entry-method property is set to "psci")
+          must specify this property.
+
+      riscv,sbi-suspend-param:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          suspend_type parameter to pass to the RISC-V SBI HSM suspend call.
+
+          This property is required in idle state nodes of device tree meant
+          for RISC-V systems. For more details on the suspend_type parameter
+          refer the SBI specifiation v0.3 (or higher) [7].
+
+      local-timer-stop:
+        description:
+          If present the CPU local timer control logic is
+             lost on state entry, otherwise it is retained.
+        type: boolean
+
+      entry-latency-us:
+        description:
+          Worst case latency in microseconds required to enter the idle state.
+
+      exit-latency-us:
+        description:
+          Worst case latency in microseconds required to exit the idle state.
+          The exit-latency-us duration may be guaranteed only after
+          entry-latency-us has passed.
+
+      min-residency-us:
+        description:
+          Minimum residency duration in microseconds, inclusive of preparation
+          and entry, for this idle state to be considered worthwhile energy wise
+          (refer to section 2 of this document for a complete description).
+
+      wakeup-latency-us:
+        description: |
+          Maximum delay between the signaling of a wake-up event and the CPU
+          being able to execute normal code again. If omitted, this is assumed
+          to be equal to:
+
+            entry-latency-us + exit-latency-us
+
+          It is important to supply this value on systems where the duration of
+          PREP phase (see diagram 1, section 2) is non-neglibigle. In such
+          systems entry-latency-us + exit-latency-us will exceed
+          wakeup-latency-us by this duration.
+
+      idle-state-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          A string used as a descriptive name for the idle state.
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - entry-latency-us
+      - exit-latency-us
+      - min-residency-us
+
+additionalProperties: false
+
+examples:
+  - |
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <2>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x0>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x1>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10000>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10001>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@100000000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x0>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x1>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10000>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10001>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        idle-states {
+            entry-method = "psci";
+
+            CPU_RETENTION_0_0: cpu-retention-0-0 {
+                compatible = "arm,idle-state";
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CLUSTER_RETENTION_0: cluster-retention-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CPU_SLEEP_0_0: cpu-sleep-0-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_SLEEP_0: cluster-sleep-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+
+            CPU_RETENTION_1_0: cpu-retention-1-0 {
+                compatible = "arm,idle-state";
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <90>;
+            };
+
+            CLUSTER_RETENTION_1: cluster-retention-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <270>;
+                wakeup-latency-us = <100>;
+            };
+
+            CPU_SLEEP_1_0: cpu-sleep-1-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <70>;
+                exit-latency-us = <100>;
+                min-residency-us = <300>;
+                wakeup-latency-us = <150>;
+            };
+
+            CLUSTER_SLEEP_1: cluster-sleep-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <500>;
+                exit-latency-us = <1200>;
+                min-residency-us = <3500>;
+                wakeup-latency-us = <1300>;
+            };
+        };
+    };
+
+  - |
+    // Example 2 (ARM 32-bit, 8-cpu system, two clusters):
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <1>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x0>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x1>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@2 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x2>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@3 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x3>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x100>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        cpu@101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x101>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        cpu@102 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x102>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        cpu@103 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x103>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        idle-states {
+            cpu_sleep_0_0: cpu-sleep-0-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <200>;
+                exit-latency-us = <100>;
+                min-residency-us = <400>;
+                wakeup-latency-us = <250>;
+            };
+
+            cluster_sleep_0: cluster-sleep-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <500>;
+                exit-latency-us = <1500>;
+                min-residency-us = <2500>;
+                wakeup-latency-us = <1700>;
+            };
+
+            cpu_sleep_1_0: cpu-sleep-1-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <300>;
+                exit-latency-us = <500>;
+                min-residency-us = <900>;
+                wakeup-latency-us = <600>;
+            };
+
+            cluster_sleep_1: cluster-sleep-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <800>;
+                exit-latency-us = <2000>;
+                min-residency-us = <6500>;
+                wakeup-latency-us = <2300>;
+            };
+        };
+    };
+
+  - |
+    // Example 3 (RISC-V 64-bit, 4-cpu systems, two clusters):
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <1>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x0>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>,
+                            <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>;
+
+            cpu_intc0: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x1>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>,
+                            <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>;
+
+            cpu_intc1: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@10 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x10>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>,
+                            <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>;
+
+            cpu_intc10: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@11 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x11>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>,
+                            <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>;
+
+            cpu_intc11: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        idle-states {
+            CPU_RET_0_0: cpu-retentive-0-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x10000000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CPU_NONRET_0_0: cpu-nonretentive-0-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x90000000>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_RET_0: cluster-retentive-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x11000000>;
+                local-timer-stop;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CLUSTER_NONRET_0: cluster-nonretentive-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x91000000>;
+                local-timer-stop;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+
+            CPU_RET_1_0: cpu-retentive-1-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x10000010>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CPU_NONRET_1_0: cpu-nonretentive-1-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x90000010>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_RET_1: cluster-retentive-1 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x11000010>;
+                local-timer-stop;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CLUSTER_NONRET_1: cluster-nonretentive-1 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x91000010>;
+                local-timer-stop;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
index 73470ecd1f12..ce91a9197697 100644
--- a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@@ -16,7 +16,7 @@ has been processed. See [2] for more information on the brcm,l2-intc node.
 firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
 Adaptive Voltage Scaling.
 
-[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
 
 
 Node brcm,avs-cpu-data-mem
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
index 332aed8f4597..1d7e49167666 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
@@ -11,14 +11,15 @@ Required properties:
 - None
 
 Optional properties:
-- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt for
+- operating-points: Refer to Documentation/devicetree/bindings/opp/opp-v1.yaml for
   details. OPPs *must* be supplied either via DT, i.e. this property, or
   populated at runtime.
 - clock-latency: Specify the possible maximum transition latency for clock,
   in unit of nanoseconds.
 - voltage-tolerance: Specify the CPU voltage tolerance in percentage.
 - #cooling-cells:
-     Please refer to Documentation/devicetree/bindings/thermal/thermal.txt.
+     Please refer to
+     Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml.
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
new file mode 100644
index 000000000000..9cd42a64b13e
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek's CPUFREQ Bindings
+
+maintainers:
+  - Hector Yuan <hector.yuan@mediatek.com>
+
+description:
+  CPUFREQ HW is a hardware engine used by MediaTek SoCs to
+  manage frequency in hardware. It is capable of controlling
+  frequency for multiple clusters.
+
+properties:
+  compatible:
+    const: mediatek,cpufreq-hw
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description:
+      Addresses and sizes for the memory of the HW bases in
+      each frequency domain. Each entry corresponds to
+      a register bank for each frequency domain present.
+
+  "#performance-domain-cells":
+    description:
+      Number of cells in a performance domain specifier.
+      Set const to 1 here for nodes providing multiple
+      performance domains.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#performance-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cpus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            cpu0: cpu@0 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a55";
+                enable-method = "psci";
+                performance-domains = <&performance 0>;
+                reg = <0x000>;
+            };
+    };
+
+    /* ... */
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        performance: performance-controller@11bc00 {
+            compatible = "mediatek,cpufreq-hw";
+            reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+
+            #performance-domain-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
index 0551c78619de..e0a4ba599abc 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
@@ -10,7 +10,7 @@ Required properties:
 			  transition and not stable yet.
 	Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
 	generic clock consumer properties.
-- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
+- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
 	for detail.
 - proc-supply: Regulator for Vproc of CPU cluster.
 
@@ -20,9 +20,16 @@ Optional properties:
 	       Vsram to fit SoC specific needs. When absent, the voltage scaling
 	       flow is handled by hardware, hence no software "voltage tracking" is
 	       needed.
+- mediatek,cci:
+	Used to confirm the link status between cpufreq and mediatek cci. Because
+	cpufreq and mediatek cci could share the same regulator in some MediaTek SoCs.
+	To prevent the issue of high frequency and low voltage, we need to use this
+	property to make sure mediatek cci is ready.
+	For details of mediatek cci, please refer to
+	Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
 - #cooling-cells:
-	Please refer to Documentation/devicetree/bindings/thermal/thermal.txt
-	for detail.
+	For details, please refer to
+	Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
 
 Example 1 (MT7623 SoC):
 
@@ -202,11 +209,11 @@ Example 2 (MT8173 SoC):
 
 	cpu2: cpu@100 {
 		device_type = "cpu";
-		compatible = "arm,cortex-a57";
+		compatible = "arm,cortex-a72";
 		reg = <0x100>;
 		enable-method = "psci";
 		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+		clocks = <&infracfg CLK_INFRA_CA72SEL>,
 			 <&apmixedsys CLK_APMIXED_MAINPLL>;
 		clock-names = "cpu", "intermediate";
 		operating-points-v2 = <&cpu_opp_table_b>;
@@ -214,11 +221,11 @@ Example 2 (MT8173 SoC):
 
 	cpu3: cpu@101 {
 		device_type = "cpu";
-		compatible = "arm,cortex-a57";
+		compatible = "arm,cortex-a72";
 		reg = <0x101>;
 		enable-method = "psci";
 		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+		clocks = <&infracfg CLK_INFRA_CA72SEL>,
 			 <&apmixedsys CLK_APMIXED_MAINPLL>;
 		clock-names = "cpu", "intermediate";
 		operating-points-v2 = <&cpu_opp_table_b>;
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
deleted file mode 100644
index 33856947c561..000000000000
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-Qualcomm Technologies, Inc. CPUFREQ Bindings
-
-CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
-SoCs to manage frequency in hardware. It is capable of controlling frequency
-for multiple clusters.
-
-Properties:
-- compatible
-	Usage:		required
-	Value type:	<string>
-	Definition:	must be "qcom,cpufreq-hw".
-
-- clocks
-	Usage:		required
-	Value type:	<phandle> From common clock binding.
-	Definition:	clock handle for XO clock and GPLL0 clock.
-
-- clock-names
-	Usage:		required
-	Value type:	<string> From common clock binding.
-	Definition:	must be "xo", "alternate".
-
-- reg
-	Usage:		required
-	Value type:	<prop-encoded-array>
-	Definition:	Addresses and sizes for the memory of the HW bases in
-			each frequency domain.
-- reg-names
-	Usage:		Optional
-	Value type:	<string>
-	Definition:	Frequency domain name i.e.
-			"freq-domain0", "freq-domain1".
-
-- #freq-domain-cells:
-	Usage:		required.
-	Definition:	Number of cells in a freqency domain specifier.
-
-* Property qcom,freq-domain
-Devices supporting freq-domain must set their "qcom,freq-domain" property with
-phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node.
-
-
-Example:
-
-Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch
-DCVS state together.
-
-/ {
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_0: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
-				      compatible = "cache";
-				};
-			};
-		};
-
-		CPU1: cpu@100 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x100>;
-			enable-method = "psci";
-			next-level-cache = <&L2_100>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_100: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU2: cpu@200 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x200>;
-			enable-method = "psci";
-			next-level-cache = <&L2_200>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_200: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU3: cpu@300 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x300>;
-			enable-method = "psci";
-			next-level-cache = <&L2_300>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_300: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU4: cpu@400 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x400>;
-			enable-method = "psci";
-			next-level-cache = <&L2_400>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_400: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU5: cpu@500 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x500>;
-			enable-method = "psci";
-			next-level-cache = <&L2_500>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_500: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU6: cpu@600 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x600>;
-			enable-method = "psci";
-			next-level-cache = <&L2_600>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_600: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU7: cpu@700 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x700>;
-			enable-method = "psci";
-			next-level-cache = <&L2_700>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_700: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-	};
-
- soc {
-	cpufreq_hw: cpufreq@17d43000 {
-		compatible = "qcom,cpufreq-hw";
-		reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
-		reg-names = "freq-domain0", "freq-domain1";
-
-		clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
-		clock-names = "xo", "alternate";
-
-		#freq-domain-cells = <1>;
-	};
-}
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
new file mode 100644
index 000000000000..24fa3d87a40b
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/cpufreq-qcom-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. CPUFREQ
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+
+  CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
+  SoCs to manage frequency in hardware. It is capable of controlling frequency
+  for multiple clusters.
+
+properties:
+  compatible:
+    oneOf:
+      - description: v1 of CPUFREQ HW
+        items:
+          - const: qcom,cpufreq-hw
+
+      - description: v2 of CPUFREQ HW (EPSS)
+        items:
+          - enum:
+              - qcom,sm6375-cpufreq-epss
+              - qcom,sm8250-cpufreq-epss
+          - const: qcom,cpufreq-epss
+
+  reg:
+    minItems: 2
+    items:
+      - description: Frequency domain 0 register region
+      - description: Frequency domain 1 register region
+      - description: Frequency domain 2 register region
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: freq-domain0
+      - const: freq-domain1
+      - const: freq-domain2
+
+  clocks:
+    items:
+      - description: XO Clock
+      - description: GPLL0 Clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: alternate
+
+  '#freq-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#freq-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    // Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster
+    // switch DCVS state together.
+    cpus {
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      CPU0: cpu@0 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x0>;
+        enable-method = "psci";
+        next-level-cache = <&L2_0>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        L2_0: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+          L3_0: l3-cache {
+            compatible = "cache";
+          };
+        };
+      };
+
+      CPU1: cpu@100 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x100>;
+        enable-method = "psci";
+        next-level-cache = <&L2_100>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        L2_100: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU2: cpu@200 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x200>;
+        enable-method = "psci";
+        next-level-cache = <&L2_200>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        L2_200: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU3: cpu@300 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x300>;
+        enable-method = "psci";
+        next-level-cache = <&L2_300>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        L2_300: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU4: cpu@400 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x400>;
+        enable-method = "psci";
+        next-level-cache = <&L2_400>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        L2_400: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU5: cpu@500 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x500>;
+        enable-method = "psci";
+        next-level-cache = <&L2_500>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        L2_500: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU6: cpu@600 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x600>;
+        enable-method = "psci";
+        next-level-cache = <&L2_600>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        L2_600: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU7: cpu@700 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x700>;
+        enable-method = "psci";
+        next-level-cache = <&L2_700>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        L2_700: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+    };
+
+    soc {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      cpufreq@17d43000 {
+        compatible = "qcom,cpufreq-hw";
+        reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
+        reg-names = "freq-domain0", "freq-domain1";
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
+
+        #freq-domain-cells = <1>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
index d91a02a3b6b0..6b0b452acef0 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
@@ -6,8 +6,6 @@ from the SoC, then supplies the OPP framework with 'prop' and 'supported
 hardware' information respectively.  The framework is then able to read
 the DT and operate in the usual way.
 
-For more information about the expected DT format [See: ../opp/opp.txt].
-
 Frequency Scaling only
 ----------------------
 
@@ -15,7 +13,7 @@ No vendor specific driver required for this.
 
 Located in CPU's node:
 
-- operating-points		: [See: ../power/opp.txt]
+- operating-points		: [See: ../power/opp-v1.yaml]
 
 Example [safe]
 --------------
@@ -37,7 +35,7 @@ This requires the ST CPUFreq driver to supply 'process' and 'version' info.
 
 Located in CPU's node:
 
-- operating-points-v2		: [See ../power/opp.txt]
+- operating-points-v2		: [See ../power/opp-v2.yaml]
 
 Example [unsafe]
 ----------------
diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
new file mode 100644
index 000000000000..bdbfd7c36101
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
@@ -0,0 +1,56 @@
+Binding for NVIDIA Tegra20 CPUFreq
+==================================
+
+Required properties:
+- clocks: Must contain an entry for the CPU clock.
+  See ../clocks/clock-bindings.txt for details.
+- operating-points-v2: See ../bindings/opp/opp-v2.yaml for details.
+- #cooling-cells: Should be 2. See ../thermal/thermal-cooling-devices.yaml for details.
+
+For each opp entry in 'operating-points-v2' table:
+- opp-supported-hw: Two bitfields indicating:
+	On Tegra20:
+	1. CPU process ID mask
+	2. SoC speedo ID mask
+
+	On Tegra30:
+	1. CPU process ID mask
+	2. CPU speedo ID mask
+
+	A bitwise AND is performed against these values and if any bit
+	matches, the OPP gets enabled.
+
+- opp-microvolt: CPU voltage triplet.
+
+Optional properties:
+- cpu-supply: Phandle to the CPU power supply.
+
+Example:
+	regulators {
+		cpu_reg: regulator0 {
+			regulator-name = "vdd_cpu";
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp@456000000 {
+			clock-latency-ns = <125000>;
+			opp-microvolt = <825000 825000 1125000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		...
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			clocks = <&tegra_car TEGRA20_CLK_CCLK>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-supply = <&cpu_reg>;
+			#cooling-cells = <2>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
new file mode 100644
index 000000000000..a11e1b867379
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/qcom-cpufreq-nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. NVMEM CPUFreq bindings
+
+maintainers:
+  - Ilia Lin <ilia.lin@kernel.org>
+
+description: |
+  In certain Qualcomm Technologies, Inc. SoCs such as QCS404, The CPU supply
+  voltage is dynamically configured by Core Power Reduction (CPR) depending on
+  current CPU frequency and efuse values.
+  CPR provides a power domain with multiple levels that are selected depending
+  on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level
+  according to the required OPPs defined in the CPU OPP tables.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,apq8064
+          - qcom,apq8096
+          - qcom,ipq8064
+          - qcom,msm8939
+          - qcom,msm8960
+          - qcom,msm8974
+          - qcom,msm8996
+          - qcom,qcs404
+  required:
+    - compatible
+
+properties:
+  cpus:
+    type: object
+
+    patternProperties:
+      'cpu@[0-9a-f]+':
+        type: object
+
+        properties:
+          power-domains:
+            maxItems: 1
+
+          power-domain-names:
+            items:
+              - const: cpr
+
+        required:
+          - power-domains
+          - power-domain-names
+
+patternProperties:
+  '^opp-table(-[a-z0-9]+)?$':
+    if:
+      properties:
+        compatible:
+          const: operating-points-v2-kryo-cpu
+    then:
+      patternProperties:
+        '^opp-?[0-9]+$':
+          required:
+            - required-opps
+
+additionalProperties: true
+
+examples:
+  - |
+    / {
+        model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
+        compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb", "qcom,qcs404";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cpus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            CPU0: cpu@100 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x100>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU1: cpu@101 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x101>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU2: cpu@102 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x102>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU3: cpu@103 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x103>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+        };
+
+        cpu_opp_table: opp-table-cpu {
+            compatible = "operating-points-v2-kryo-cpu";
+            opp-shared;
+
+            opp-1094400000 {
+                opp-hz = /bits/ 64 <1094400000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1248000000 {
+                opp-hz = /bits/ 64 <1248000000>;
+                required-opps = <&cpr_opp2>;
+            };
+            opp-1401600000 {
+                opp-hz = /bits/ 64 <1401600000>;
+                required-opps = <&cpr_opp3>;
+            };
+        };
+
+        cpr_opp_table: opp-table-cpr {
+            compatible = "operating-points-v2-qcom-level";
+
+            cpr_opp1: opp1 {
+                opp-level = <1>;
+                qcom,opp-fuse-level = <1>;
+            };
+            cpr_opp2: opp2 {
+                opp-level = <2>;
+                qcom,opp-fuse-level = <2>;
+            };
+            cpr_opp3: opp3 {
+                opp-level = <3>;
+                qcom,opp-fuse-level = <3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
index 33c7842917f6..0401c11da8d9 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/allwinner,sun4i-a10-crypto.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Security System Device Tree Bindings
+title: Allwinner A10 Security System
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -15,14 +15,18 @@ properties:
     oneOf:
       - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun5i-a13-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun5i-a13-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun6i-a31-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun6i-a31-crypto
+          - const: allwinner,sun4i-a10-crypto
       - items:
-        - const: allwinner,sun7i-a20-crypto
-        - const: allwinner,sun4i-a10-crypto
+          - const: allwinner,sun7i-a20-crypto
+          - const: allwinner,sun4i-a10-crypto
+      - const: allwinner,sun8i-a33-crypto
+      - items:
+          - const: allwinner,sun8i-v3s-crypto
+          - const: allwinner,sun8i-a33-crypto
 
   reg:
     maxItems: 1
@@ -40,6 +44,16 @@ properties:
       - const: ahb
       - const: mod
 
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
   resets:
     maxItems: 1
 
@@ -57,7 +71,9 @@ if:
   properties:
     compatible:
       contains:
-        const: allwinner,sun6i-a31-crypto
+        enum:
+          - allwinner,sun6i-a31-crypto
+          - allwinner,sun8i-a33-crypto
 
 then:
   required:
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
index 2c459b8c76ff..026a9f9e1aeb 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
@@ -30,7 +30,6 @@ properties:
       - description: Module clock
       - description: MBus clock
     minItems: 2
-    maxItems: 3
 
   clock-names:
     items:
@@ -38,7 +37,6 @@ properties:
       - const: mod
       - const: ram
     minItems: 2
-    maxItems: 3
 
   resets:
     maxItems: 1
@@ -46,20 +44,19 @@ properties:
 if:
   properties:
     compatible:
-      items:
-        const: allwinner,sun50i-h6-crypto
+      const: allwinner,sun50i-h6-crypto
 then:
   properties:
-      clocks:
-        minItems: 3
-      clock-names:
-        minItems: 3
+    clocks:
+      minItems: 3
+    clock-names:
+      minItems: 3
 else:
   properties:
-      clocks:
-        maxItems: 2
-      clock-names:
-        maxItems: 2
+    clocks:
+      maxItems: 2
+    clock-names:
+      maxItems: 2
 
 required:
   - compatible
@@ -85,4 +82,3 @@ examples:
       clock-names = "bus", "mod";
       resets = <&ccu RST_BUS_CE>;
     };
-
diff --git a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
index 5becc60a0e28..ecf98a9e72b2 100644
--- a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
@@ -12,7 +12,7 @@ maintainers:
 properties:
   compatible:
     items:
-    - const: amlogic,gxl-crypto
+      - const: amlogic,gxl-crypto
 
   reg:
     maxItems: 1
@@ -45,7 +45,7 @@ examples:
 
     crypto: crypto-engine@c883e000 {
         compatible = "amlogic,gxl-crypto";
-        reg = <0x0 0xc883e000 0x0 0x36>;
+        reg = <0xc883e000 0x36>;
         interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
         clocks = <&clkc CLKID_BLKMV>;
         clock-names = "blkmv";
diff --git a/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml b/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml
new file mode 100644
index 000000000000..9c97874a6dbd
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/arm,cryptocell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm TrustZone CryptoCell cryptographic engine
+
+maintainers:
+  - Gilad Ben-Yossef <gilad@benyossef.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,cryptocell-713-ree
+      - arm,cryptocell-703-ree
+      - arm,cryptocell-712-ree
+      - arm,cryptocell-710-ree
+      - arm,cryptocell-630p-ree
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    arm_cc712: crypto@80000000 {
+            compatible = "arm,cryptocell-712-ree";
+            reg = <0x80000000 0x10000>;
+            interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt b/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt
deleted file mode 100644
index 6130e6eb4af8..000000000000
--- a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Arm TrustZone CryptoCell cryptographic engine
-
-Required properties:
-- compatible: Should be one of -
-   "arm,cryptocell-713-ree"
-   "arm,cryptocell-703-ree"
-   "arm,cryptocell-712-ree"
-   "arm,cryptocell-710-ree"
-   "arm,cryptocell-630p-ree"
-- reg: Base physical address of the engine and length of memory mapped region.
-- interrupts: Interrupt number for the device.
-
-Optional properties:
-- clocks: Reference to the crypto engine clock.
-- dma-coherent: Present if dma operations are coherent.
-
-Examples:
-
-       arm_cc712: crypto@80000000 {
-               compatible = "arm,cryptocell-712-ree";
-               interrupt-parent = <&intc>;
-               interrupts = < 0 30 4 >;
-               reg = < 0x80000000 0x10000 >;
-
-       };
diff --git a/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml
new file mode 100644
index 000000000000..a772d232de09
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/aspeed,ast2500-hace.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED HACE hash and crypto Hardware Accelerator Engines
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+
+description: |
+  The Hash and Crypto Engine (HACE) is designed to accelerate the throughput
+  of hash data digest, encryption, and decryption. Basically, HACE can be
+  divided into two independently engines - Hash Engine and Crypto Engine.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2500-hace
+      - aspeed,ast2600-hace
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    hace: crypto@1e6d0000 {
+        compatible = "aspeed,ast2600-hace";
+        reg = <0x1e6d0000 0x200>;
+        interrupts = <4>;
+        clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+        resets = <&syscon ASPEED_RESET_HACE>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml
new file mode 100644
index 000000000000..0ccaab16dc61
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Advanced Encryption Standard (AES) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@microchip.com>
+
+properties:
+  compatible:
+    const: atmel,at91sam9g46-aes
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: aes_clk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    aes: crypto@e1810000 {
+      compatible = "atmel,at91sam9g46-aes";
+      reg = <0xe1810000 0x100>;
+      interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+      clock-names = "aes_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+             <&dma0 AT91_XDMAC_DT_PERID(2)>;
+      dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml
new file mode 100644
index 000000000000..5163c51b4547
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-sha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Secure Hash Algorithm (SHA) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@microchip.com>
+
+properties:
+  compatible:
+    const: atmel,at91sam9g46-sha
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: sha_clk
+
+  dmas:
+    maxItems: 1
+    description: TX DMA Channel
+
+  dma-names:
+    const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    sha: crypto@e1814000 {
+      compatible = "atmel,at91sam9g46-sha";
+      reg = <0xe1814000 0x100>;
+      interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+      clock-names = "sha_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+      dma-names = "tx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml
new file mode 100644
index 000000000000..fcc5adf03cad
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-tdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Triple Data Encryption Standard (TDES) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@microchip.com>
+
+properties:
+  compatible:
+    const: atmel,at91sam9g46-tdes
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: tdes_clk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    tdes: crypto@e2014000 {
+      compatible = "atmel,at91sam9g46-tdes";
+      reg = <0xe2014000 0x100>;
+      interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+      clock-names = "tdes_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+             <&dma0 AT91_XDMAC_DT_PERID(53)>;
+      dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
deleted file mode 100644
index f2aab3dc2b52..000000000000
--- a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-* Atmel HW cryptographic accelerators
-
-These are the HW cryptographic accelerators found on some Atmel products.
-
-* Advanced Encryption Standard (AES)
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g46-aes".
-- reg: Should contain AES registers location and length.
-- interrupts: Should contain the IRQ line for the AES.
-- dmas: List of two DMA specifiers as described in
-        atmel-dma.txt and dma.txt files.
-- dma-names: Contains one identifier string for each DMA specifier
-             in the dmas property.
-
-Example:
-aes@f8038000 {
-	compatible = "atmel,at91sam9g46-aes";
-	reg = <0xf8038000 0x100>;
-	interrupts = <43 4 0>;
-	dmas = <&dma1 2 18>,
-	       <&dma1 2 19>;
-	dma-names = "tx", "rx";
-
-* Triple Data Encryption Standard (Triple DES)
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g46-tdes".
-- reg: Should contain TDES registers location and length.
-- interrupts: Should contain the IRQ line for the TDES.
-
-Optional properties:
-- dmas: List of two DMA specifiers as described in
-        atmel-dma.txt and dma.txt files.
-- dma-names: Contains one identifier string for each DMA specifier
-             in the dmas property.
-
-Example:
-tdes@f803c000 {
-	compatible = "atmel,at91sam9g46-tdes";
-	reg = <0xf803c000 0x100>;
-	interrupts = <44 4 0>;
-	dmas = <&dma1 2 20>,
-	       <&dma1 2 21>;
-	dma-names = "tx", "rx";
-};
-
-* Secure Hash Algorithm (SHA)
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g46-sha".
-- reg: Should contain SHA registers location and length.
-- interrupts: Should contain the IRQ line for the SHA.
-
-Optional properties:
-- dmas: One DMA specifiers as described in
-        atmel-dma.txt and dma.txt files.
-- dma-names: Contains one identifier string for each DMA specifier
-             in the dmas property. Only one "tx" string needed.
-
-Example:
-sha@f8034000 {
-	compatible = "atmel,at91sam9g46-sha";
-	reg = <0xf8034000 0x100>;
-	interrupts = <42 4 0>;
-	dmas = <&dma1 2 17>;
-	dma-names = "tx";
-};
diff --git a/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml b/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml
new file mode 100644
index 000000000000..b633b8d0e6f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/cortina,sl3516-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SL3516 cryptographic offloader driver
+
+maintainers:
+  - Corentin Labbe <clabbe@baylibre.com>
+
+properties:
+  compatible:
+    enum:
+      - cortina,sl3516-crypto
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+
+    crypto@62000000 {
+        compatible = "cortina,sl3516-crypto";
+        reg = <0x62000000 0x10000>;
+        interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+        resets = <&syscon GEMINI_RESET_SECURITY>;
+        clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
deleted file mode 100644
index 4e4d387e38a5..000000000000
--- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Freescale DCP (Data Co-Processor) found on i.MX23/i.MX28 .
-
-Required properties:
-- compatible : Should be "fsl,<soc>-dcp"
-- reg : Should contain MXS DCP registers location and length
-- interrupts : Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ
-               must be supplied, optionally Secure IRQ can be present, but
-	       is currently not implemented and not used.
-- clocks : Clock reference (only required on some SOCs: 6ull and 6sll).
-- clock-names : Must be "dcp".
-
-Example:
-
-dcp@80028000 {
-	compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
-	reg = <0x80028000 0x2000>;
-	interrupts = <52 53>;
-};
diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
new file mode 100644
index 000000000000..99be01539fcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl-dcp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale DCP (Data Co-Processor) found on i.MX23/i.MX28
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-dcp
+      - fsl,imx28-dcp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ
+      must be supplied, optionally Secure IRQ can be present, but is currently
+      not implemented and not used.
+    items:
+      - description: MXS DCP VMI interrupt
+      - description: MXS DCP DCP interrupt
+      - description: MXS DCP secure interrupt
+    minItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dcp
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@80028000 {
+        compatible = "fsl,imx23-dcp";
+        reg = <0x80028000 0x2000>;
+        interrupts = <53>, <54>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt
deleted file mode 100644
index e8a35c71e947..000000000000
--- a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Freescale SAHARA Cryptographic Accelerator included in some i.MX chips.
-Currently only i.MX27 and i.MX53 are supported.
-
-Required properties:
-- compatible : Should be "fsl,<soc>-sahara"
-- reg : Should contain SAHARA registers location and length
-- interrupts : Should contain SAHARA interrupt number
-
-Example:
-
-sah@10025000 {
-	compatible = "fsl,imx27-sahara";
-	reg = <	0x10025000 0x800>;
-	interrupts = <75>;
-};
diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml
new file mode 100644
index 000000000000..d531f3af3ea4
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl-imx-sahara.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SAHARA Cryptographic Accelerator included in some i.MX chips
+
+maintainers:
+  - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx27-sahara
+      - fsl,imx53-sahara
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@10025000 {
+        compatible = "fsl,imx27-sahara";
+        reg = < 0x10025000 0x800>;
+        interrupts = <75>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt
deleted file mode 100644
index 7aad448e8a36..000000000000
--- a/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Freescale Security Controller (SCC)
-
-Required properties:
-- compatible : Should be "fsl,imx25-scc".
-- reg : Should contain register location and length.
-- interrupts : Should contain interrupt numbers for SCM IRQ and SMN IRQ.
-- interrupt-names : Should specify the names "scm" and "smn" for the
-		    SCM IRQ and SMN IRQ.
-- clocks: Should contain the clock driving the SCC core.
-- clock-names: Should be set to "ipg".
-
-Example:
-
-	scc: crypto@53fac000 {
-		compatible = "fsl,imx25-scc";
-		reg = <0x53fac000 0x4000>;
-		clocks = <&clks 111>;
-		clock-names = "ipg";
-		interrupts = <49>, <50>;
-		interrupt-names = "scm", "smn";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml
new file mode 100644
index 000000000000..563a31605d2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl-imx-scc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Security Controller (SCC)
+
+maintainers:
+  - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+properties:
+  compatible:
+    const: fsl,imx25-scc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: SCC SCM interrupt
+      - description: SCC SMN interrupt
+
+  interrupt-names:
+    items:
+      - const: scm
+      - const: smn
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@53fac000 {
+        compatible = "fsl,imx25-scc";
+        reg = <0x53fac000 0x4000>;
+        clocks = <&clks 111>;
+        clock-names = "ipg";
+        interrupts = <49>, <50>;
+        interrupt-names = "scm", "smn";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index 2fe245ca816a..8f359f473ada 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -138,7 +138,7 @@ iMX6QDL/SX requires four clocks
 
 iMX6UL does only require three clocks
 
-	crypto: caam@2140000 {
+	crypto: crypto@2140000 {
 		compatible = "fsl,sec-v4.0";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
new file mode 100644
index 000000000000..e0fe63957888
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx cryptographic engine
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Intel IXP4xx cryptographic engine makes use of the IXP4xx NPE
+  (Network Processing Engine). Since it is not a device on its own
+  it is defined as a subnode of the NPE, if crypto support is
+  available on the platform.
+
+properties:
+  compatible:
+    const: intel,ixp4xx-crypto
+
+  intel,npe-handle:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      - items:
+          - description: phandle to the NPE this crypto engine
+          - description: the NPE instance number
+    description: phandle to the NPE this crypto engine is using, the cell
+      describing the NPE instance to be used.
+
+  queue-rx:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the RX queue on the NPE
+          - description: the queue instance number
+    description: phandle to the RX queue on the NPE, the cell describing
+      the queue instance to be used.
+
+  queue-txready:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the TX READY queue on the NPE
+          - description: the queue instance number
+    description: phandle to the TX READY queue on the NPE, the cell describing
+      the queue instance to be used.
+
+required:
+  - compatible
+  - intel,npe-handle
+  - queue-rx
+  - queue-txready
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
new file mode 100644
index 000000000000..fedd8be56ad6
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay OCS AES
+
+maintainers:
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  The Intel Keem Bay Offload and Crypto Subsystem (OCS) AES engine provides
+  hardware-accelerated AES/SM4 encryption/decryption.
+
+properties:
+  compatible:
+    const: intel,keembay-ocs-aes
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    crypto@30008000 {
+      compatible = "intel,keembay-ocs-aes";
+      reg = <0x30008000 0x1000>;
+      interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&scmi_clk 95>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml
new file mode 100644
index 000000000000..2bb95247b64f
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-ecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay OCS ECC
+
+maintainers:
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+  - Prabhjot Khurana <prabhjot.khurana@intel.com>
+
+description:
+  The Intel Keem Bay Offload and Crypto Subsystem (OCS) Elliptic Curve
+  Cryptography (ECC) device provides hardware acceleration for elliptic curve
+  cryptography using the NIST P-256 and NIST P-384 elliptic curves.
+
+properties:
+  compatible:
+    const: intel,keembay-ocs-ecc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    crypto@30001000 {
+      compatible = "intel,keembay-ocs-ecc";
+      reg = <0x30001000 0x1000>;
+      interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&scmi_clk 95>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml
new file mode 100644
index 000000000000..46e2853ab8f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-hcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay OCS HCU
+
+maintainers:
+  - Declan Murphy <declan.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  The Intel Keem Bay Offload and Crypto Subsystem (OCS) Hash Control Unit (HCU)
+  provides hardware-accelerated hashing and HMAC.
+
+properties:
+  compatible:
+    const: intel,keembay-ocs-hcu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    crypto@3000b000 {
+      compatible = "intel,keembay-ocs-hcu";
+      reg = <0x3000b000 0x1000>;
+      interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&scmi_clk 94>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/picochip-spacc.txt b/Documentation/devicetree/bindings/crypto/picochip-spacc.txt
deleted file mode 100644
index df1151f87745..000000000000
--- a/Documentation/devicetree/bindings/crypto/picochip-spacc.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Picochip picoXcell SPAcc (Security Protocol Accelerator) bindings
-
-Picochip picoXcell devices contain crypto offload engines that may be used for
-IPSEC and femtocell layer 2 ciphering.
-
-Required properties:
-  - compatible : "picochip,spacc-ipsec" for the IPSEC offload engine
-    "picochip,spacc-l2" for the femtocell layer 2 ciphering engine.
-  - reg : Offset and length of the register set for this device
-  - interrupts : The interrupt line from the SPAcc.
-  - ref-clock : The input clock that drives the SPAcc.
-
-Example SPAcc node:
-
-spacc@10000 {
-	compatible = "picochip,spacc-ipsec";
-	reg = <0x100000 0x10000>;
-	interrupt-parent = <&vic0>;
-	interrupts = <24>;
-	ref-clock = <&ipsec_clk>, "ref";
-};
diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.txt b/Documentation/devicetree/bindings/crypto/qcom,prng.txt
deleted file mode 100644
index 7ee0e9eac973..000000000000
--- a/Documentation/devicetree/bindings/crypto/qcom,prng.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Qualcomm MSM pseudo random number generator.
-
-Required properties:
-
-- compatible  : should be "qcom,prng" for 8916 etc
-              : should be "qcom,prng-ee" for 8996 and later using EE
-		(Execution Environment) slice of prng
-- reg         : specifies base physical address and size of the registers map
-- clocks      : phandle to clock-controller plus clock-specifier pair
-- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
-
-Example:
-
-	rng@f9bff000 {
-		compatible = "qcom,prng";
-		reg = <0xf9bff000 0x200>;
-		clocks = <&clock GCC_PRNG_AHB_CLK>;
-		clock-names = "core";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml
new file mode 100644
index 000000000000..bb42f4588b40
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom,prng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Pseudo Random Number Generator
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,prng  # 8916 etc.
+      - qcom,prng-ee  # 8996 and later using EE
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: core
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@f9bff000 {
+        compatible = "qcom,prng";
+        reg = <0xf9bff000 0x200>;
+        clocks = <&clk 125>;
+        clock-names = "core";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
index 04fe5dfa794a..5b31891c97fe 100644
--- a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
+++ b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
@@ -8,7 +8,6 @@ title: Samsung Exynos SoC SlimSSS (Slim Security SubSystem) module
 
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
-  - Kamil Konieczny <k.konieczny@partner.samsung.com>
 
 description: |+
   The SlimSSS module in Exynos5433 SoC supports the following:
@@ -19,13 +18,12 @@ description: |+
 properties:
   compatible:
     items:
-      - const: samsung,exynos5433-slim-ss
+      - const: samsung,exynos5433-slim-sss
 
   reg:
     maxItems: 1
 
   clocks:
-    minItems: 2
     maxItems: 2
 
   clock-names:
diff --git a/Documentation/devicetree/bindings/crypto/samsung-sss.yaml b/Documentation/devicetree/bindings/crypto/samsung-sss.yaml
index cf1c47a81d7f..6d62b0e42fc9 100644
--- a/Documentation/devicetree/bindings/crypto/samsung-sss.yaml
+++ b/Documentation/devicetree/bindings/crypto/samsung-sss.yaml
@@ -8,7 +8,6 @@ title: Samsung Exynos SoC SSS (Security SubSystem) module
 
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
-  - Kamil Konieczny <k.konieczny@partner.samsung.com>
 
 description: |+
   The SSS module in S5PV210 SoC supports the following:
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
index cee624c14f07..b72e4858f9aa 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 CRC bindings
 
 maintainers:
-  - Lionel Debieve <lionel.debieve@st.com>
+  - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
index a4574552502a..ed23bf94a8e0 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 CRYP bindings
 
 maintainers:
-  - Lionel Debieve <lionel.debieve@st.com>
+  - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
index 57ae1c0b6d18..10ba94792d95 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 HASH bindings
 
 maintainers:
-  - Lionel Debieve <lionel.debieve@st.com>
+  - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
@@ -36,11 +36,10 @@ properties:
 
   dma-maxburst:
     description: Set number of maximum dma burst supported
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-      - maximum: 2
-      - default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 2
+    default: 0
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
new file mode 100644
index 000000000000..0c15fefb6671
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/ti,sa2ul.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: K3 SoC SA2UL crypto module
+
+maintainers:
+  - Tero Kristo <t-kristo@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-sa2ul
+      - ti,am654-sa2ul
+      - ti,am64-sa2ul
+      - ti,am62-sa3ul
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel #1
+      - description: RX DMA Channel #2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx1
+      - const: rx2
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges:
+    description:
+      Address translation for the possible RNG child node for SA2UL
+
+  clocks:
+    items:
+      - description: Clock used by PKA
+      - description: Main Input Clock
+      - description: Clock used by rng
+
+  clock-names:
+    items:
+      - const: pka_in_clk
+      - const: x1_clk
+      - const: x2_clk
+
+patternProperties:
+  "^rng@[a-f0-9]+$":
+    type: object
+    description:
+      Child RNG node for SA2UL
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    main_crypto: crypto@4e00000 {
+        compatible = "ti,j721e-sa2ul";
+        reg = <0x4e00000 0x1200>;
+        power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
+        dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
+               <&main_udmap 0x4001>;
+        dma-names = "tx", "rx1", "rx2";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
new file mode 100644
index 000000000000..9e8fbd02b150
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/xlnx,zynqmp-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP AES-GCM Hardware Accelerator
+
+maintainers:
+  - Kalyani Akula <kalyani.akula@xilinx.com>
+  - Michal Simek <michal.simek@xilinx.com>
+
+description: |
+  The ZynqMP AES-GCM hardened cryptographic accelerator is used to
+  encrypt or decrypt the data with provided key and initialization vector.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-aes
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+      zynqmp_firmware: zynqmp-firmware {
+        compatible = "xlnx,zynqmp-firmware";
+        method = "smc";
+        xlnx_aes: zynqmp-aes {
+          compatible = "xlnx,zynqmp-aes";
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/ddr/lpddr2-timings.txt b/Documentation/devicetree/bindings/ddr/lpddr2-timings.txt
deleted file mode 100644
index 9ceb19e0c7fd..000000000000
--- a/Documentation/devicetree/bindings/ddr/lpddr2-timings.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
-
-Required properties:
-- compatible : Should be "jedec,lpddr2-timings"
-- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
-- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
-
-Optional properties:
-
-The following properties represent AC timing parameters from the memory
-data-sheet of the device for a given speed-bin. All these properties are
-of type <u32> and the default unit is ps (pico seconds). Parameters with
-a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
-- tRCD
-- tWR
-- tRAS-min
-- tRRD
-- tWTR
-- tXP
-- tRTP
-- tDQSCK-max
-- tFAW
-- tZQCS
-- tZQinit
-- tRPab
-- tZQCL
-- tCKESR
-- tRAS-max-ns
-- tDQSCK-max-derated
-
-Example:
-
-timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
-	compatible	= "jedec,lpddr2-timings";
-	min-freq	= <10000000>;
-	max-freq	= <400000000>;
-	tRPab		= <21000>;
-	tRCD		= <18000>;
-	tWR		= <15000>;
-	tRAS-min	= <42000>;
-	tRRD		= <10000>;
-	tWTR		= <7500>;
-	tXP		= <7500>;
-	tRTP		= <7500>;
-	tCKESR		= <15000>;
-	tDQSCK-max	= <5500>;
-	tFAW		= <50000>;
-	tZQCS		= <90000>;
-	tZQCL		= <360000>;
-	tZQinit		= <1000000>;
-	tRAS-max-ns	= <70000>;
-};
diff --git a/Documentation/devicetree/bindings/ddr/lpddr2.txt b/Documentation/devicetree/bindings/ddr/lpddr2.txt
deleted file mode 100644
index ddd40121e6f6..000000000000
--- a/Documentation/devicetree/bindings/ddr/lpddr2.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2
-
-Required properties:
-- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2",
-  "jedec,lpddr2-s4"
-
-  "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type
-
-  "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type
-
-  "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type
-
-- density  : <u32> representing density in Mb (Mega bits)
-
-- io-width : <u32> representing bus width. Possible values are 8, 16, and 32
-
-Optional properties:
-
-The following optional properties represent the minimum value of some AC
-timing parameters of the DDR device in terms of number of clock cycles.
-These values shall be obtained from the device data-sheet.
-- tRRD-min-tck
-- tWTR-min-tck
-- tXP-min-tck
-- tRTP-min-tck
-- tCKE-min-tck
-- tRPab-min-tck
-- tRCD-min-tck
-- tWR-min-tck
-- tRASmin-min-tck
-- tCKESR-min-tck
-- tFAW-min-tck
-
-Child nodes:
-- The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
-  "lpddr2-timings" provides AC timing parameters of the device for
-  a given speed-bin. The user may provide the timings for as many
-  speed-bins as is required. Please see Documentation/devicetree/
-  bindings/ddr/lpddr2-timings.txt for more information on "lpddr2-timings"
-
-Example:
-
-elpida_ECB240ABACN : lpddr2 {
-	compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
-	density		= <2048>;
-	io-width	= <32>;
-
-	tRPab-min-tck	= <3>;
-	tRCD-min-tck	= <3>;
-	tWR-min-tck	= <3>;
-	tRASmin-min-tck	= <3>;
-	tRRD-min-tck	= <2>;
-	tWTR-min-tck	= <2>;
-	tXP-min-tck	= <2>;
-	tRTP-min-tck	= <2>;
-	tCKE-min-tck	= <3>;
-	tCKESR-min-tck	= <3>;
-	tFAW-min-tck	= <8>;
-
-	timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
-		compatible	= "jedec,lpddr2-timings";
-		min-freq	= <10000000>;
-		max-freq	= <400000000>;
-		tRPab		= <21000>;
-		tRCD		= <18000>;
-		tWR		= <15000>;
-		tRAS-min	= <42000>;
-		tRRD		= <10000>;
-		tWTR		= <7500>;
-		tXP		= <7500>;
-		tRTP		= <7500>;
-		tCKESR		= <15000>;
-		tDQSCK-max	= <5500>;
-		tFAW		= <50000>;
-		tZQCS		= <90000>;
-		tZQCL		= <360000>;
-		tZQinit		= <1000000>;
-		tRAS-max-ns	= <70000>;
-	};
-
-	timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
-		compatible	= "jedec,lpddr2-timings";
-		min-freq	= <10000000>;
-		max-freq	= <200000000>;
-		tRPab		= <21000>;
-		tRCD		= <18000>;
-		tWR		= <15000>;
-		tRAS-min	= <42000>;
-		tRRD		= <10000>;
-		tWTR		= <10000>;
-		tXP		= <7500>;
-		tRTP		= <7500>;
-		tCKESR		= <15000>;
-		tDQSCK-max	= <5500>;
-		tFAW		= <50000>;
-		tZQCS		= <90000>;
-		tZQCL		= <360000>;
-		tZQinit		= <1000000>;
-		tRAS-max-ns	= <70000>;
-	};
-
-}
diff --git a/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt b/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
deleted file mode 100644
index 84705e50a3fd..000000000000
--- a/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* AC timing parameters of LPDDR3 memories for a given speed-bin.
-
-The structures are based on LPDDR2 and extended where needed.
-
-Required properties:
-- compatible : Should be "jedec,lpddr3-timings"
-- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
-- reg : maximum DDR clock frequency for the speed-bin. Type is <u32>
-
-Optional properties:
-
-The following properties represent AC timing parameters from the memory
-data-sheet of the device for a given speed-bin. All these properties are
-of type <u32> and the default unit is ps (pico seconds).
-- tRFC
-- tRRD
-- tRPab
-- tRPpb
-- tRCD
-- tRC
-- tRAS
-- tWTR
-- tWR
-- tRTP
-- tW2W-C2C
-- tR2R-C2C
-- tFAW
-- tXSR
-- tXP
-- tCKE
-- tCKESR
-- tMRD
-
-Example:
-
-timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
-	compatible	= "jedec,lpddr3-timings";
-	reg		= <800000000>; /* workaround: it shows max-freq */
-	min-freq	= <100000000>;
-	tRFC		= <65000>;
-	tRRD		= <6000>;
-	tRPab		= <12000>;
-	tRPpb		= <12000>;
-	tRCD		= <10000>;
-	tRC		= <33750>;
-	tRAS		= <23000>;
-	tWTR		= <3750>;
-	tWR		= <7500>;
-	tRTP		= <3750>;
-	tW2W-C2C	= <0>;
-	tR2R-C2C	= <0>;
-	tFAW		= <25000>;
-	tXSR		= <70000>;
-	tXP		= <3750>;
-	tCKE		= <3750>;
-	tCKESR		= <3750>;
-	tMRD		= <7000>;
-};
diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/ddr/lpddr3.txt
deleted file mode 100644
index a0eda35a86ee..000000000000
--- a/Documentation/devicetree/bindings/ddr/lpddr3.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-* LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C
-
-Required properties:
-- compatible : Should be "<vendor>,<type>", and generic value "jedec,lpddr3".
-  Example "<vendor>,<type>" values:
-    "samsung,K3QF2F20DB"
-
-- density  : <u32> representing density in Mb (Mega bits)
-- io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
-- #address-cells: Must be set to 1
-- #size-cells: Must be set to 0
-
-Optional properties:
-
-The following optional properties represent the minimum value of some AC
-timing parameters of the DDR device in terms of number of clock cycles.
-These values shall be obtained from the device data-sheet.
-- tRFC-min-tck
-- tRRD-min-tck
-- tRPab-min-tck
-- tRPpb-min-tck
-- tRCD-min-tck
-- tRC-min-tck
-- tRAS-min-tck
-- tWTR-min-tck
-- tWR-min-tck
-- tRTP-min-tck
-- tW2W-C2C-min-tck
-- tR2R-C2C-min-tck
-- tWL-min-tck
-- tDQSCK-min-tck
-- tRL-min-tck
-- tFAW-min-tck
-- tXSR-min-tck
-- tXP-min-tck
-- tCKE-min-tck
-- tCKESR-min-tck
-- tMRD-min-tck
-
-Child nodes:
-- The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
-  "lpddr3-timings" provides AC timing parameters of the device for
-  a given speed-bin. Please see Documentation/devicetree/
-  bindings/ddr/lpddr3-timings.txt for more information on "lpddr3-timings"
-
-Example:
-
-samsung_K3QF2F20DB: lpddr3 {
-	compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
-	density		= <16384>;
-	io-width	= <32>;
-	#address-cells	= <1>;
-	#size-cells	= <0>;
-
-	tRFC-min-tck		= <17>;
-	tRRD-min-tck		= <2>;
-	tRPab-min-tck		= <2>;
-	tRPpb-min-tck		= <2>;
-	tRCD-min-tck		= <3>;
-	tRC-min-tck		= <6>;
-	tRAS-min-tck		= <5>;
-	tWTR-min-tck		= <2>;
-	tWR-min-tck		= <7>;
-	tRTP-min-tck		= <2>;
-	tW2W-C2C-min-tck	= <0>;
-	tR2R-C2C-min-tck	= <0>;
-	tWL-min-tck		= <8>;
-	tDQSCK-min-tck		= <5>;
-	tRL-min-tck		= <14>;
-	tFAW-min-tck		= <5>;
-	tXSR-min-tck		= <12>;
-	tXP-min-tck		= <2>;
-	tCKE-min-tck		= <2>;
-	tCKESR-min-tck		= <2>;
-	tMRD-min-tck		= <5>;
-
-	timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
-		compatible	= "jedec,lpddr3-timings";
-		/* workaround: 'reg' shows max-freq */
-		reg		= <800000000>;
-		min-freq	= <100000000>;
-		tRFC		= <65000>;
-		tRRD		= <6000>;
-		tRPab		= <12000>;
-		tRPpb		= <12000>;
-		tRCD		= <10000>;
-		tRC		= <33750>;
-		tRAS		= <23000>;
-		tWTR		= <3750>;
-		tWR		= <7500>;
-		tRTP		= <3750>;
-		tW2W-C2C	= <0>;
-		tR2R-C2C	= <0>;
-		tFAW		= <25000>;
-		tXSR		= <70000>;
-		tXP		= <3750>;
-		tCKE		= <3750>;
-		tCKESR		= <3750>;
-		tMRD		= <7000>;
-	};
-}
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
deleted file mode 100644
index aeaebd425d1f..000000000000
--- a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-
-* Samsung Exynos NoC (Network on Chip) Probe device
-
-The Samsung Exynos542x SoC has NoC (Network on Chip) Probe for NoC bus.
-NoC provides the primitive values to get the performance data. The packets
-that the Network on Chip (NoC) probes detects are transported over
-the network infrastructure to observer units. You can configure probes to
-capture packets with header or data on the data request response network,
-or as traffic debug or statistic collectors. Exynos542x bus has multiple
-NoC probes to provide bandwidth information about behavior of the SoC
-that you can use while analyzing system performance.
-
-Required properties:
-- compatible: Should be "samsung,exynos5420-nocp"
-- reg: physical base address of each NoC Probe and length of memory mapped region.
-
-Optional properties:
-- clock-names : the name of clock used by the NoC Probe, "nocp"
-- clocks : phandles for clock specified in "clock-names" property
-
-Example : NoC Probe nodes in Device Tree are listed below.
-
-	nocp_mem0_0: nocp@10ca1000 {
-		compatible = "samsung,exynos5420-nocp";
-		reg = <0x10CA1000 0x200>;
-	};
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
deleted file mode 100644
index fb46b491791c..000000000000
--- a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
+++ /dev/null
@@ -1,169 +0,0 @@
-
-* Samsung Exynos PPMU (Platform Performance Monitoring Unit) device
-
-The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for
-each IP. PPMU provides the primitive values to get performance data. These
-PPMU events provide information of the SoC's behaviors so that you may
-use to analyze system performance, to make behaviors visible and to count
-usages of each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC).
-The Exynos PPMU driver uses the devfreq-event class to provide event data
-to various devfreq devices. The devfreq devices would use the event data when
-derterming the current state of each IP.
-
-Required properties for PPMU device:
-- compatible: Should be "samsung,exynos-ppmu" or "samsung,exynos-ppmu-v2.
-- reg: physical base address of each PPMU and length of memory mapped region.
-
-Optional properties for PPMU device:
-- clock-names : the name of clock used by the PPMU, "ppmu"
-- clocks : phandles for clock specified in "clock-names" property
-
-Required properties for 'events' child node of PPMU device:
-- event-name : the unique event name among PPMU device
-Optional properties for 'events' child node of PPMU device:
-- event-data-type : Define the type of data which shell be counted
-by the counter. You can check include/dt-bindings/pmu/exynos_ppmu.h for
-all possible type, i.e. count read requests, count write data in bytes,
-etc. This field is optional and when it is missing, the driver code
-will use default data type.
-
-Example1 : PPMUv1 nodes in exynos3250.dtsi are listed below.
-
-		ppmu_dmc0: ppmu_dmc0@106a0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x106a0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_dmc1: ppmu_dmc1@106b0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x106b0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_cpu: ppmu_cpu@106c0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x106c0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_rightbus: ppmu_rightbus@112a0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x112a0000 0x2000>;
-			clocks = <&cmu CLK_PPMURIGHT>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_leftbus: ppmu_leftbus0@116a0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x116a0000 0x2000>;
-			clocks = <&cmu CLK_PPMULEFT>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-Example2 : Events of each PPMU node in exynos3250-rinato.dts are listed below.
-
-	&ppmu_dmc0 {
-		status = "okay";
-
-		events {
-			ppmu_dmc0_3: ppmu-event3-dmc0 {
-				event-name = "ppmu-event3-dmc0";
-			};
-
-			ppmu_dmc0_2: ppmu-event2-dmc0 {
-				event-name = "ppmu-event2-dmc0";
-			};
-
-			ppmu_dmc0_1: ppmu-event1-dmc0 {
-				event-name = "ppmu-event1-dmc0";
-			};
-
-			ppmu_dmc0_0: ppmu-event0-dmc0 {
-				event-name = "ppmu-event0-dmc0";
-			};
-		};
-	};
-
-	&ppmu_dmc1 {
-		status = "okay";
-
-		events {
-			ppmu_dmc1_3: ppmu-event3-dmc1 {
-				event-name = "ppmu-event3-dmc1";
-			};
-		};
-	};
-
-	&ppmu_leftbus {
-		status = "okay";
-
-		events {
-			ppmu_leftbus_3: ppmu-event3-leftbus {
-				event-name = "ppmu-event3-leftbus";
-			};
-		};
-	};
-
-	&ppmu_rightbus {
-		status = "okay";
-
-		events {
-			ppmu_rightbus_3: ppmu-event3-rightbus {
-				event-name = "ppmu-event3-rightbus";
-			};
-		};
-	};
-
-Example3 : PPMUv2 nodes in exynos5433.dtsi are listed below.
-
-		ppmu_d0_cpu: ppmu_d0_cpu@10480000 {
-			compatible = "samsung,exynos-ppmu-v2";
-			reg = <0x10480000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_d0_general: ppmu_d0_general@10490000 {
-			compatible = "samsung,exynos-ppmu-v2";
-			reg = <0x10490000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_d0_rt: ppmu_d0_rt@104a0000 {
-			compatible = "samsung,exynos-ppmu-v2";
-			reg = <0x104a0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_d1_cpu: ppmu_d1_cpu@104b0000 {
-			compatible = "samsung,exynos-ppmu-v2";
-			reg = <0x104b0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_d1_general: ppmu_d1_general@104c0000 {
-			compatible = "samsung,exynos-ppmu-v2";
-			reg = <0x104c0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_d1_rt: ppmu_d1_rt@104d0000 {
-			compatible = "samsung,exynos-ppmu-v2";
-			reg = <0x104d0000 0x2000>;
-			status = "disabled";
-		};
-
-Example4 : 'event-data-type' in exynos4412-ppmu-common.dtsi are listed below.
-
-	&ppmu_dmc0 {
-		status = "okay";
-		events {
-			ppmu_dmc0_3: ppmu-event3-dmc0 {
-			event-name = "ppmu-event3-dmc0";
-			event-data-type = <(PPMU_RO_DATA_CNT |
-					PPMU_WO_DATA_CNT)>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
new file mode 100644
index 000000000000..2bdd05af6079
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/event/samsung,exynos-nocp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos NoC (Network on Chip) Probe
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung Exynos542x SoC has a NoC (Network on Chip) Probe for NoC bus.
+  NoC provides the primitive values to get the performance data. The packets
+  that the Network on Chip (NoC) probes detects are transported over the
+  network infrastructure to observer units. You can configure probes to capture
+  packets with header or data on the data request response network, or as
+  traffic debug or statistic collectors. Exynos542x bus has multiple NoC probes
+  to provide bandwidth information about behavior of the SoC that you can use
+  while analyzing system performance.
+
+properties:
+  compatible:
+    const: samsung,exynos5420-nocp
+
+  clock-names:
+    items:
+      - const: nocp
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    nocp_mem0_0: nocp@10ca1000 {
+        compatible = "samsung,exynos5420-nocp";
+        reg = <0x10ca1000 0x200>;
+    };
diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
new file mode 100644
index 000000000000..e300df4b47f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/event/samsung,exynos-ppmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC PPMU (Platform Performance Monitoring Unit)
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for
+  each IP. PPMU provides the primitive values to get performance data. These
+  PPMU events provide information of the SoC's behaviors so that you may use to
+  analyze system performance, to make behaviors visible and to count usages of
+  each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC).  The
+  Exynos PPMU driver uses the devfreq-event class to provide event data to
+  various devfreq devices. The devfreq devices would use the event data when
+  derterming the current state of each IP.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos-ppmu
+      - samsung,exynos-ppmu-v2
+
+  clock-names:
+    items:
+      - const: ppmu
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  events:
+    type: object
+
+    patternProperties:
+      '^ppmu-event[0-9]+(-[a-z0-9]+){,2}$':
+        type: object
+        properties:
+          event-name:
+            description: |
+              The unique event name among PPMU device
+            $ref: /schemas/types.yaml#/definitions/string
+
+          event-data-type:
+            description: |
+              Define the type of data which shell be counted by the counter.
+              You can check include/dt-bindings/pmu/exynos_ppmu.h for all
+              possible type, i.e. count read requests, count write data in
+              bytes, etc.  This field is optional and when it is missing, the
+              driver code will use default data type.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - event-name
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    // PPMUv1 nodes for Exynos3250 (although the board DTS defines events)
+    #include <dt-bindings/clock/exynos3250.h>
+
+    ppmu_dmc0: ppmu@106a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x106a0000 0x2000>;
+
+        events {
+            ppmu_dmc0_3: ppmu-event3-dmc0 {
+                event-name = "ppmu-event3-dmc0";
+            };
+
+            ppmu_dmc0_2: ppmu-event2-dmc0 {
+                event-name = "ppmu-event2-dmc0";
+            };
+
+            ppmu_dmc0_1: ppmu-event1-dmc0 {
+                event-name = "ppmu-event1-dmc0";
+            };
+
+            ppmu_dmc0_0: ppmu-event0-dmc0 {
+                event-name = "ppmu-event0-dmc0";
+            };
+        };
+    };
+
+    ppmu_rightbus: ppmu@112a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x112a0000 0x2000>;
+        clocks = <&cmu CLK_PPMURIGHT>;
+        clock-names = "ppmu";
+
+        events {
+            ppmu_rightbus_3: ppmu-event3-rightbus {
+                event-name = "ppmu-event3-rightbus";
+            };
+        };
+    };
+
+  - |
+    // PPMUv2 nodes in Exynos5433
+    ppmu_d0_cpu: ppmu@10480000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x10480000 0x2000>;
+    };
+
+    ppmu_d0_general: ppmu@10490000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x10490000 0x2000>;
+
+        events {
+            ppmu_event0_d0_general: ppmu-event0-d0-general {
+                event-name = "ppmu-event0-d0-general";
+            };
+        };
+    };
+
+    ppmu_d0_rt: ppmu@104a0000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x104a0000 0x2000>;
+    };
+
+    ppmu_d1_cpu: ppmu@104b0000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x104b0000 0x2000>;
+    };
+
+    ppmu_d1_general: ppmu@104c0000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x104c0000 0x2000>;
+    };
+
+    ppmu_d1_rt: ppmu@104d0000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x104d0000 0x2000>;
+    };
+
+  - |
+    // PPMUv1 nodes with event-data-type for Exynos4412
+    #include <dt-bindings/pmu/exynos_ppmu.h>
+
+    ppmu@106a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x106a0000 0x2000>;
+        clocks = <&clock 400>;
+        clock-names = "ppmu";
+
+        events {
+            ppmu-event3-dmc0 {
+                event-name = "ppmu-event3-dmc0";
+                event-data-type = <(PPMU_RO_DATA_CNT |
+                                    PPMU_WO_DATA_CNT)>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
deleted file mode 100644
index e71f752cc18f..000000000000
--- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+++ /dev/null
@@ -1,421 +0,0 @@
-* Generic Exynos Bus frequency device
-
-The Samsung Exynos SoC has many buses for data transfer between DRAM
-and sub-blocks in SoC. Most Exynos SoCs share the common architecture
-for buses. Generally, each bus of Exynos SoC includes a source clock
-and a power line, which are able to change the clock frequency
-of the bus in runtime. To monitor the usage of each bus in runtime,
-the driver uses the PPMU (Platform Performance Monitoring Unit), which
-is able to measure the current load of sub-blocks.
-
-The Exynos SoC includes the various sub-blocks which have the each AXI bus.
-The each AXI bus has the owned source clock but, has not the only owned
-power line. The power line might be shared among one more sub-blocks.
-So, we can divide into two type of device as the role of each sub-block.
-There are two type of bus devices as following:
-- parent bus device
-- passive bus device
-
-Basically, parent and passive bus device share the same power line.
-The parent bus device can only change the voltage of shared power line
-and the rest bus devices (passive bus device) depend on the decision of
-the parent bus device. If there are three blocks which share the VDD_xxx
-power line, Only one block should be parent device and then the rest blocks
-should depend on the parent device as passive device.
-
-	VDD_xxx |--- A block (parent)
-		|--- B block (passive)
-		|--- C block (passive)
-
-There are a little different composition among Exynos SoC because each Exynos
-SoC has different sub-blocks. Therefore, such difference should be specified
-in devicetree file instead of each device driver. In result, this driver
-is able to support the bus frequency for all Exynos SoCs.
-
-Required properties for all bus devices:
-- compatible: Should be "samsung,exynos-bus".
-- clock-names : the name of clock used by the bus, "bus".
-- clocks : phandles for clock specified in "clock-names" property.
-- operating-points-v2: the OPP table including frequency/voltage information
-  to support DVFS (Dynamic Voltage/Frequency Scaling) feature.
-
-Required properties only for parent bus device:
-- vdd-supply: the regulator to provide the buses with the voltage.
-- devfreq-events: the devfreq-event device to monitor the current utilization
-  of buses.
-
-Required properties only for passive bus device:
-- devfreq: the parent bus device.
-
-Optional properties only for parent bus device:
-- exynos,saturation-ratio: the percentage value which is used to calibrate
-			the performance count against total cycle count.
-
-Detailed correlation between sub-blocks and power line according to Exynos SoC:
-- In case of Exynos3250, there are two power line as following:
-	VDD_MIF |--- DMC
-
-	VDD_INT |--- LEFTBUS (parent device)
-		|--- PERIL
-		|--- MFC
-		|--- G3D
-		|--- RIGHTBUS
-		|--- PERIR
-		|--- FSYS
-		|--- LCD0
-		|--- PERIR
-		|--- ISP
-		|--- CAM
-
-- In case of Exynos4210, there is one power line as following:
-	VDD_INT |--- DMC (parent device)
-		|--- LEFTBUS
-		|--- PERIL
-		|--- MFC(L)
-		|--- G3D
-		|--- TV
-		|--- LCD0
-		|--- RIGHTBUS
-		|--- PERIR
-		|--- MFC(R)
-		|--- CAM
-		|--- FSYS
-		|--- GPS
-		|--- LCD0
-		|--- LCD1
-
-- In case of Exynos4x12, there are two power line as following:
-	VDD_MIF |--- DMC
-
-	VDD_INT |--- LEFTBUS (parent device)
-		|--- PERIL
-		|--- MFC(L)
-		|--- G3D
-		|--- TV
-		|--- IMAGE
-		|--- RIGHTBUS
-		|--- PERIR
-		|--- MFC(R)
-		|--- CAM
-		|--- FSYS
-		|--- GPS
-		|--- LCD0
-		|--- ISP
-
-- In case of Exynos5422, there are two power line as following:
-	VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
-	        |--- DREX 1
-
-	VDD_INT |--- NoC_Core (parent device)
-		|--- G2D
-		|--- G3D
-		|--- DISP1
-		|--- NoC_WCORE
-		|--- GSCL
-		|--- MSCL
-		|--- ISP
-		|--- MFC
-		|--- GEN
-		|--- PERIS
-		|--- PERIC
-		|--- FSYS
-		|--- FSYS2
-
-- In case of Exynos5433, there is VDD_INT power line as following:
-	VDD_INT |--- G2D (parent device)
-		|--- MSCL
-		|--- GSCL
-		|--- JPEG
-		|--- MFC
-		|--- HEVC
-		|--- BUS0
-		|--- BUS1
-		|--- BUS2
-		|--- PERIS (Fixed clock rate)
-		|--- PERIC (Fixed clock rate)
-		|--- FSYS  (Fixed clock rate)
-
-Example1:
-	Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to
-	power line (regulator). The MIF (Memory Interface) AXI bus is used to
-	transfer data between DRAM and CPU and uses the VDD_MIF regulator.
-
-	- MIF (Memory Interface) block
-	: VDD_MIF |--- DMC (Dynamic Memory Controller)
-
-	- INT (Internal) block
-	: VDD_INT |--- LEFTBUS (parent device)
-		  |--- PERIL
-		  |--- MFC
-		  |--- G3D
-		  |--- RIGHTBUS
-		  |--- FSYS
-		  |--- LCD0
-		  |--- PERIR
-		  |--- ISP
-		  |--- CAM
-
-	- MIF bus's frequency/voltage table
-	-----------------------
-	|Lv| Freq   | Voltage |
-	-----------------------
-	|L1| 50000  |800000   |
-	|L2| 100000 |800000   |
-	|L3| 134000 |800000   |
-	|L4| 200000 |825000   |
-	|L5| 400000 |875000   |
-	-----------------------
-
-	- INT bus's frequency/voltage table
-	----------------------------------------------------------
-	|Block|LEFTBUS|RIGHTBUS|MCUISP |ISP    |PERIL  ||VDD_INT |
-	| name|       |LCD0    |       |       |       ||        |
-	|     |       |FSYS    |       |       |       ||        |
-	|     |       |MFC     |       |       |       ||        |
-	----------------------------------------------------------
-	|Mode |*parent|passive |passive|passive|passive||        |
-	----------------------------------------------------------
-	|Lv   |Frequency                               ||Voltage |
-	----------------------------------------------------------
-	|L1   |50000  |50000   |50000  |50000  |50000  ||900000  |
-	|L2   |80000  |80000   |80000  |80000  |80000  ||900000  |
-	|L3   |100000 |100000  |100000 |100000 |100000 ||1000000 |
-	|L4   |134000 |134000  |200000 |200000 |       ||1000000 |
-	|L5   |200000 |200000  |400000 |300000 |       ||1000000 |
-	----------------------------------------------------------
-
-Example2 :
-	The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi
-	is listed below:
-
-	bus_dmc: bus_dmc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu_dmc CLK_DIV_DMC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_dmc_opp_table>;
-		status = "disabled";
-	};
-
-	bus_dmc_opp_table: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-			opp-microvolt = <800000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <800000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <800000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <825000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <875000>;
-		};
-	};
-
-	bus_leftbus: bus_leftbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_GDL>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_rightbus: bus_rightbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_GDR>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_lcd0: bus_lcd0 {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_160>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_fsys: bus_fsys {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_200>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mcuisp: bus_mcuisp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_mcuisp_opp_table>;
-		status = "disabled";
-	};
-
-	bus_isp: bus_isp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_266>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_isp_opp_table>;
-		status = "disabled";
-	};
-
-	bus_peril: bus_peril {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_100>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_peril_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mfc: bus_mfc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_SCLK_MFC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_leftbus_opp_table: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <1000000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <1000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <1000000>;
-		};
-	};
-
-	bus_mcuisp_opp_table: opp_table2 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-		};
-	};
-
-	bus_isp_opp_table: opp_table3 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-		};
-	};
-
-	bus_peril_opp_table: opp_table4 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-	};
-
-
-	Usage case to handle the frequency and voltage of bus on runtime
-	in exynos3250-rinato.dts is listed below:
-
-	&bus_dmc {
-		devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
-		vdd-supply = <&buck1_reg>;	/* VDD_MIF */
-		status = "okay";
-	};
-
-	&bus_leftbus {
-		devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
-		vdd-supply = <&buck3_reg>;
-		status = "okay";
-	};
-
-	&bus_rightbus {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_lcd0 {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_fsys {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_mcuisp {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_isp {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_peril {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_mfc {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
new file mode 100644
index 000000000000..e3379d106728
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/nvidia,tegra30-actmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 Activity Monitor
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The activity monitor block collects statistics about the behaviour of other
+  components in the system. This information can be used to derive the rate at
+  which the external memory needs to be clocked in order to serve all requests
+  from the monitored clients.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra30-actmon
+      - nvidia,tegra114-actmon
+      - nvidia,tegra124-actmon
+      - nvidia,tegra210-actmon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: actmon
+      - const: emc
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: actmon
+
+  interrupts:
+    maxItems: 1
+
+  interconnects:
+    minItems: 1
+    maxItems: 12
+
+  interconnect-names:
+    minItems: 1
+    maxItems: 12
+    description:
+      Should include name of the interconnect path for each interconnect
+      entry. Consult TRM documentation for information about available
+      memory clients, see MEMORY CONTROLLER and ACTIVITY MONITOR sections.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC speedo ID mask.
+
+  "#cooling-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - interrupts
+  - interconnects
+  - interconnect-names
+  - operating-points-v2
+  - "#cooling-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/memory/tegra30-mc.h>
+
+    mc: memory-controller@7000f000 {
+        compatible = "nvidia,tegra30-mc";
+        reg = <0x7000f000 0x400>;
+        clocks = <&clk 32>;
+        clock-names = "mc";
+
+        interrupts = <0 77 4>;
+
+        #iommu-cells = <1>;
+        #reset-cells = <1>;
+        #interconnect-cells = <1>;
+    };
+
+    emc: external-memory-controller@7000f400 {
+        compatible = "nvidia,tegra30-emc";
+        reg = <0x7000f400 0x400>;
+        interrupts = <0 78 4>;
+        clocks = <&clk 57>;
+
+        nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+        power-domains = <&domain>;
+
+        #interconnect-cells = <0>;
+    };
+
+    actmon@6000c800 {
+        compatible = "nvidia,tegra30-actmon";
+        reg = <0x6000c800 0x400>;
+        interrupts = <0 45 4>;
+        clocks = <&clk 119>, <&clk 57>;
+        clock-names = "actmon", "emc";
+        resets = <&rst 119>;
+        reset-names = "actmon";
+        operating-points-v2 = <&dvfs_opp_table>;
+        interconnects = <&mc TEGRA30_MC_MPCORER &emc>;
+        interconnect-names = "cpu-read";
+        #cooling-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
deleted file mode 100644
index 0ec68141f85a..000000000000
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ /dev/null
@@ -1,213 +0,0 @@
-* Rockchip rk3399 DMC (Dynamic Memory Controller) device
-
-Required properties:
-- compatible:		 Must be "rockchip,rk3399-dmc".
-- devfreq-events:	 Node to get DDR loading, Refer to
-			 Documentation/devicetree/bindings/devfreq/event/
-			 rockchip-dfi.txt
-- clocks:		 Phandles for clock specified in "clock-names" property
-- clock-names :		 The name of clock used by the DFI, must be
-			 "pclk_ddr_mon";
-- operating-points-v2:	 Refer to Documentation/devicetree/bindings/opp/opp.txt
-			 for details.
-- center-supply:	 DMC supply node.
-- status:		 Marks the node enabled/disabled.
-
-Optional properties:
-- interrupts:		 The CPU interrupt number. The interrupt specifier
-			 format depends on the interrupt controller.
-			 It should be a DCF interrupt. When DDR DVFS finishes
-			 a DCF interrupt is triggered.
-
-Following properties relate to DDR timing:
-
-- rockchip,dram_speed_bin :	  Value reference include/dt-bindings/clock/rk3399-ddr.h,
-				  it selects the DDR3 cl-trp-trcd type. It must be
-				  set according to "Speed Bin" in DDR3 datasheet,
-				  DO NOT use a smaller "Speed Bin" than specified
-				  for the DDR3 being used.
-
-- rockchip,pd_idle :		  Configure the PD_IDLE value. Defines the
-				  power-down idle period in which memories are
-				  placed into power-down mode if bus is idle
-				  for PD_IDLE DFI clock cycles.
-
-- rockchip,sr_idle :		  Configure the SR_IDLE value. Defines the
-				  self-refresh idle period in which memories are
-				  placed into self-refresh mode if bus is idle
-				  for SR_IDLE * 1024 DFI clock cycles (DFI
-				  clocks freq is half of DRAM clock), default
-				  value is "0".
-
-- rockchip,sr_mc_gate_idle :	  Defines the memory self-refresh and controller
-				  clock gating idle period. Memories are placed
-				  into self-refresh mode and memory controller
-				  clock arg gating started if bus is idle for
-				  sr_mc_gate_idle*1024 DFI clock cycles.
-
-- rockchip,srpd_lite_idle :	  Defines the self-refresh power down idle
-				  period in which memories are placed into
-				  self-refresh power down mode if bus is idle
-				  for srpd_lite_idle * 1024 DFI clock cycles.
-				  This parameter is for LPDDR4 only.
-
-- rockchip,standby_idle :	  Defines the standby idle period in which
-				  memories are placed into self-refresh mode.
-				  The controller, pi, PHY and DRAM clock will
-				  be gated if bus is idle for standby_idle * DFI
-				  clock cycles.
-
-- rockchip,dram_dll_dis_freq :	  Defines the DDR3 DLL bypass frequency in MHz.
-				  When DDR frequency is less than DRAM_DLL_DISB_FREQ,
-				  DDR3 DLL will be bypassed. Note: if DLL was bypassed,
-				  the odt will also stop working.
-
-- rockchip,phy_dll_dis_freq :	  Defines the PHY dll bypass frequency in
-				  MHz (Mega Hz). When DDR frequency is less than
-				  DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
-				  Note: PHY DLL and PHY ODT are independent.
-
-- rockchip,ddr3_odt_dis_freq :	  When the DRAM type is DDR3, this parameter defines
-				  the ODT disable frequency in MHz (Mega Hz).
-				  when the DDR frequency is  less then ddr3_odt_dis_freq,
-				  the ODT on the DRAM side and controller side are
-				  both disabled.
-
-- rockchip,ddr3_drv :		  When the DRAM type is DDR3, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is DDR3_DS_40ohm.
-
-- rockchip,ddr3_odt :		  When the DRAM type is DDR3, this parameter defines
-				  the DRAM side ODT strength in ohms. Default value
-				  is DDR3_ODT_120ohm.
-
-- rockchip,phy_ddr3_ca_drv :	  When the DRAM type is DDR3, this parameter defines
-				  the phy side CA line (incluing command line,
-				  address line and clock line) driver strength.
-				  Default value is PHY_DRV_ODT_40.
-
-- rockchip,phy_ddr3_dq_drv :	  When the DRAM type is DDR3, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is PHY_DRV_ODT_40.
-
-- rockchip,phy_ddr3_odt : 	  When the DRAM type is DDR3, this parameter defines
-				  the PHY side ODT strength. Default value is
-				  PHY_DRV_ODT_240.
-
-- rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines
-				  then ODT disable frequency in MHz (Mega Hz).
-				  When DDR frequency is less then ddr3_odt_dis_freq,
-				  the ODT on the DRAM side and controller side are
-				  both disabled.
-
-- rockchip,lpddr3_drv :		  When the DRAM type is LPDDR3, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is LP3_DS_34ohm.
-
-- rockchip,lpddr3_odt :		  When the DRAM type is LPDDR3, this parameter defines
-				  the DRAM side ODT strength in ohms. Default value
-				  is LP3_ODT_240ohm.
-
-- rockchip,phy_lpddr3_ca_drv :	  When the DRAM type is LPDDR3, this parameter defines
-				  the PHY side CA line (including command line,
-				  address line and clock line) driver strength.
-				  Default value is PHY_DRV_ODT_40.
-
-- rockchip,phy_lpddr3_dq_drv :	  When the DRAM type is LPDDR3, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is
-				  PHY_DRV_ODT_40.
-
-- rockchip,phy_lpddr3_odt : 	  When dram type is LPDDR3, this parameter define
-				  the phy side odt strength, default value is
-				  PHY_DRV_ODT_240.
-
-- rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter
-				  defines the ODT disable frequency in
-				  MHz (Mega Hz). When the DDR frequency is less then
-				  ddr3_odt_dis_freq, the ODT on the DRAM side and
-				  controller side are both disabled.
-
-- rockchip,lpddr4_drv :		  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is LP4_PDDS_60ohm.
-
-- rockchip,lpddr4_dq_odt : 	  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side ODT on DQS/DQ line strength in ohms.
-				  Default value is LP4_DQ_ODT_40ohm.
-
-- rockchip,lpddr4_ca_odt :	  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side ODT on CA line strength in ohms.
-				  Default value is LP4_CA_ODT_40ohm.
-
-- rockchip,phy_lpddr4_ca_drv :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side CA line (including command address
-				  line) driver strength. Default value is
-				  PHY_DRV_ODT_40.
-
-- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side clock line and CS line driver
-				  strength. Default value is PHY_DRV_ODT_80.
-
-- rockchip,phy_lpddr4_dq_drv :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is PHY_DRV_ODT_80.
-
-- rockchip,phy_lpddr4_odt :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side ODT strength. Default value is
-				  PHY_DRV_ODT_60.
-
-Example:
-	dmc_opp_table: dmc_opp_table {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <900000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <666000000>;
-			opp-microvolt = <900000>;
-		};
-	};
-
-	dmc: dmc {
-		compatible = "rockchip,rk3399-dmc";
-		devfreq-events = <&dfi>;
-		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_DDRCLK>;
-		clock-names = "dmc_clk";
-		operating-points-v2 = <&dmc_opp_table>;
-		center-supply = <&ppvar_centerlogic>;
-		upthreshold = <15>;
-		downdifferential = <10>;
-		rockchip,ddr3_speed_bin = <21>;
-		rockchip,pd_idle = <0x40>;
-		rockchip,sr_idle = <0x2>;
-		rockchip,sr_mc_gate_idle = <0x3>;
-		rockchip,srpd_lite_idle	= <0x4>;
-		rockchip,standby_idle = <0x2000>;
-		rockchip,dram_dll_dis_freq = <300>;
-		rockchip,phy_dll_dis_freq = <125>;
-		rockchip,auto_pd_dis_freq = <666>;
-		rockchip,ddr3_odt_dis_freq = <333>;
-		rockchip,ddr3_drv = <DDR3_DS_40ohm>;
-		rockchip,ddr3_odt = <DDR3_ODT_120ohm>;
-		rockchip,phy_ddr3_ca_drv = <PHY_DRV_ODT_40>;
-		rockchip,phy_ddr3_dq_drv = <PHY_DRV_ODT_40>;
-		rockchip,phy_ddr3_odt = <PHY_DRV_ODT_240>;
-		rockchip,lpddr3_odt_dis_freq = <333>;
-		rockchip,lpddr3_drv = <LP3_DS_34ohm>;
-		rockchip,lpddr3_odt = <LP3_ODT_240ohm>;
-		rockchip,phy_lpddr3_ca_drv = <PHY_DRV_ODT_40>;
-		rockchip,phy_lpddr3_dq_drv = <PHY_DRV_ODT_40>;
-		rockchip,phy_lpddr3_odt = <PHY_DRV_ODT_240>;
-		rockchip,lpddr4_odt_dis_freq = <333>;
-		rockchip,lpddr4_drv = <LP4_PDDS_60ohm>;
-		rockchip,lpddr4_dq_odt = <LP4_DQ_ODT_40ohm>;
-		rockchip,lpddr4_ca_odt = <LP4_CA_ODT_40ohm>;
-		rockchip,phy_lpddr4_ca_drv = <PHY_DRV_ODT_40>;
-		rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>;
-		rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>;
-		rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>;
-	};
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
index 86057d541065..ba06d1857b7d 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Engine Backend Device Tree Bindings
+title: Allwinner A10 Display Engine Backend
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -26,14 +26,12 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 2
     items:
       - description: Display Backend registers
       - description: SAT registers
 
   reg-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: be
       - const: sat
@@ -43,7 +41,6 @@ properties:
 
   clocks:
     minItems: 3
-    maxItems: 4
     items:
       - description: The backend interface clock
       - description: The backend module clock
@@ -52,7 +49,6 @@ properties:
 
   clock-names:
     minItems: 3
-    maxItems: 4
     items:
       - const: ahb
       - const: mod
@@ -61,14 +57,12 @@ properties:
 
   resets:
     minItems: 1
-    maxItems: 2
     items:
       - description: The Backend reset line
       - description: The SAT reset line
 
   reset-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: be
       - const: sat
@@ -84,36 +78,23 @@ properties:
     const: dma-mem
 
   ports:
-    type: object
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
-        description: |
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
           Input endpoints of the controller.
 
       port@1:
-        type: object
-        description: |
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
           Output endpoints of the controller.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
index 944ff2f1cf93..e6088f379f70 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-engine.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Engine Pipeline Device Tree Bindings
+title: Allwinner A10 Display Engine Pipeline
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -62,14 +62,16 @@ properties:
       - allwinner,sun8i-r40-display-engine
       - allwinner,sun8i-v3s-display-engine
       - allwinner,sun9i-a80-display-engine
+      - allwinner,sun20i-d1-display-engine
       - allwinner,sun50i-a64-display-engine
       - allwinner,sun50i-h6-display-engine
 
   allwinner,pipelines:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle-array
-      - minItems: 1
-        maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
+    items:
+      maxItems: 1
     description: |
       Available display engine frontends (DE 1.0) or mixers (DE
       2.0/3.0) available.
@@ -92,6 +94,7 @@ if:
           - allwinner,sun8i-a83t-display-engine
           - allwinner,sun8i-r40-display-engine
           - allwinner,sun9i-a80-display-engine
+          - allwinner,sun20i-d1-display-engine
           - allwinner,sun50i-a64-display-engine
 
 then:
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
index 3eb1c2bbf4e7..98e8240a05bd 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-frontend.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Engine Frontend Device Tree Bindings
+title: Allwinner A10 Display Engine Frontend
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -57,35 +57,22 @@ properties:
     maxItems: 1
 
   ports:
-    type: object
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
index 5d4915aed1e2..55703caacb9c 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 HDMI Controller Device Tree Bindings
+title: Allwinner A10 HDMI Controller
 
 description: |
   The HDMI Encoder supports the HDMI video and audio outputs, and does
@@ -21,8 +21,8 @@ properties:
       - const: allwinner,sun5i-a10s-hdmi
       - const: allwinner,sun6i-a31-hdmi
       - items:
-        - const: allwinner,sun7i-a20-hdmi
-        - const: allwinner,sun5i-a10s-hdmi
+          - const: allwinner,sun7i-a20-hdmi
+          - const: allwinner,sun5i-a10s-hdmi
 
   reg:
     maxItems: 1
@@ -33,32 +33,32 @@ properties:
   clocks:
     oneOf:
       - items:
-        - description: The HDMI interface clock
-        - description: The HDMI module clock
-        - description: The first video PLL
-        - description: The second video PLL
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The first video PLL
+          - description: The second video PLL
 
       - items:
-        - description: The HDMI interface clock
-        - description: The HDMI module clock
-        - description: The HDMI DDC clock
-        - description: The first video PLL
-        - description: The second video PLL
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The HDMI DDC clock
+          - description: The first video PLL
+          - description: The second video PLL
 
   clock-names:
     oneOf:
       - items:
-        - const: ahb
-        - const: mod
-        - const: pll-0
-        - const: pll-1
+          - const: ahb
+          - const: mod
+          - const: pll-0
+          - const: pll-1
 
       - items:
-        - const: ahb
-        - const: mod
-        - const: ddc
-        - const: pll-0
-        - const: pll-1
+          - const: ahb
+          - const: mod
+          - const: ddc
+          - const: pll-0
+          - const: pll-1
 
   resets:
     maxItems: 1
@@ -76,37 +76,24 @@ properties:
       - const: audio-tx
 
   ports:
-    type: object
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller. Usually an HDMI
           connector.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
index 5ff9cf26ca38..724d93b9193b 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tcon.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Timings Controller (TCON) Device Tree Bindings
+title: Allwinner A10 Timings Controller (TCON)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -33,22 +33,30 @@ properties:
       - const: allwinner,sun8i-v3s-tcon
       - const: allwinner,sun9i-a80-tcon-lcd
       - const: allwinner,sun9i-a80-tcon-tv
+      - const: allwinner,sun20i-d1-tcon-lcd
+      - const: allwinner,sun20i-d1-tcon-tv
 
       - items:
-        - enum:
-            - allwinner,sun50i-a64-tcon-lcd
-        - const: allwinner,sun8i-a83t-tcon-lcd
+          - enum:
+              - allwinner,sun7i-a20-tcon0
+              - allwinner,sun7i-a20-tcon1
+          - const: allwinner,sun7i-a20-tcon
 
       - items:
-        - enum:
-          - allwinner,sun8i-h3-tcon-tv
-          - allwinner,sun50i-a64-tcon-tv
-        - const: allwinner,sun8i-a83t-tcon-tv
+          - enum:
+              - allwinner,sun50i-a64-tcon-lcd
+          - const: allwinner,sun8i-a83t-tcon-lcd
 
       - items:
-        - enum:
-          - allwinner,sun50i-h6-tcon-tv
-        - const: allwinner,sun8i-r40-tcon-tv
+          - enum:
+              - allwinner,sun8i-h3-tcon-tv
+              - allwinner,sun50i-a64-tcon-tv
+          - const: allwinner,sun8i-a83t-tcon-tv
+
+      - items:
+          - enum:
+              - allwinner,sun50i-h6-tcon-tv
+          - const: allwinner,sun8i-r40-tcon-tv
 
   reg:
     maxItems: 1
@@ -65,11 +73,9 @@ properties:
     maxItems: 4
 
   clock-output-names:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - maxItems: 1
     description:
       Name of the LCD pixel clock created.
+    maxItems: 1
 
   dmas:
     maxItems: 1
@@ -77,64 +83,57 @@ properties:
   resets:
     anyOf:
       - items:
-        - description: TCON Reset Line
+          - description: TCON Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON LVDS Reset Line
+          - description: TCON Reset Line
+          - description: TCON LVDS Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON eDP Reset Line
+          - description: TCON Reset Line
+          - description: TCON eDP Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON eDP Reset Line
-        - description: TCON LVDS Reset Line
+          - description: TCON Reset Line
+          - description: TCON eDP Reset Line
+          - description: TCON LVDS Reset Line
 
   reset-names:
     oneOf:
       - const: lcd
 
       - items:
-        - const: lcd
-        - const: lvds
+          - const: lcd
+          - const: lvds
 
       - items:
-        - const: lcd
-        - const: edp
+          - const: lcd
+          - const: edp
 
       - items:
-        - const: lcd
-        - const: edp
-        - const: lvds
+          - const: lcd
+          - const: edp
+          - const: lvds
 
   ports:
-    type: object
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
           Output endpoints of the controller.
 
         patternProperties:
           "^endpoint(@[0-9])$":
-            type: object
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
 
             properties:
               allwinner,tcon-channel:
@@ -151,16 +150,10 @@ properties:
                   property is not present, the endpoint number will be
                   used as the channel number.
 
-            unevaluatedProperties: true
-
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -240,6 +233,7 @@ allOf:
               - allwinner,sun8i-a83t-tcon-lcd
               - allwinner,sun8i-v3s-tcon
               - allwinner,sun9i-a80-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       properties:
@@ -259,6 +253,7 @@ allOf:
               - allwinner,sun8i-a83t-tcon-tv
               - allwinner,sun8i-r40-tcon-tv
               - allwinner,sun9i-a80-tcon-tv
+              - allwinner,sun20i-d1-tcon-tv
 
     then:
       properties:
@@ -285,6 +280,7 @@ allOf:
               - allwinner,sun9i-a80-tcon-lcd
               - allwinner,sun4i-a10-tcon
               - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       required:
@@ -301,6 +297,7 @@ allOf:
               - allwinner,sun8i-a23-tcon
               - allwinner,sun8i-a33-tcon
               - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
index 6009324be967..c39e90a5945f 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tv-encoder.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 TV Encoder Device Tree Bindings
+title: Allwinner A10 TV Encoder
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -24,11 +24,9 @@ properties:
     maxItems: 1
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
-      A port node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt. The
-      first port should be the input endpoint, usually coming from the
+      The first port should be the input endpoint, usually coming from the
       associated TCON.
 
 required:
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
index 0c1ce55940e1..895506d93f4c 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 Dynamic Range Controller Device Tree Bindings
+title: Allwinner A31 Dynamic Range Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -46,36 +46,23 @@ properties:
     maxItems: 1
 
   ports:
-    type: object
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
index 9e90c2b00960..7910831fa4b8 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -4,16 +4,13 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dsi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 MIPI-DSI Controller Device Tree Bindings
+title: Allwinner A31 MIPI-DSI Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
 properties:
-  "#address-cells": true
-  "#size-cells": true
-
   compatible:
     enum:
       - allwinner,sun6i-a31-mipi-dsi
@@ -27,7 +24,6 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: Bus Clock
       - description: Module Clock
@@ -50,19 +46,12 @@ properties:
     const: dphy
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
-      A port node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt. That
-      port should be the input endpoint, usually coming from the
+      The port should be the input endpoint, usually coming from the
       associated TCON.
 
-patternProperties:
-  "^panel@[0-9]+$": true
-
 required:
-  - "#address-cells"
-  - "#size-cells"
   - compatible
   - reg
   - interrupts
@@ -74,32 +63,33 @@ required:
   - port
 
 allOf:
+  - $ref: dsi-controller.yaml#
   - if:
       properties:
-         compatible:
-           contains:
-             const: allwinner,sun6i-a31-mipi-dsi
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-mipi-dsi
 
     then:
-        properties:
-          clocks:
-            minItems: 2
+      properties:
+        clocks:
+          minItems: 2
 
-        required:
-          - clock-names
+      required:
+        - clock-names
 
   - if:
       properties:
-         compatible:
-           contains:
-             const: allwinner,sun50i-a64-mipi-dsi
+        compatible:
+          contains:
+            const: allwinner,sun50i-a64-mipi-dsi
 
     then:
-        properties:
-          clocks:
-            minItems: 1
+      properties:
+        clocks:
+          minItems: 1
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -119,7 +109,7 @@ examples:
         panel@0 {
                 compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
                 reg = <0>;
-                power-gpios = <&pio 1 7 0>; /* PB07 */
+                power-supply = <&reg_display>;
                 reset-gpios = <&r_pio 0 5 1>; /* PL05 */
                 backlight = <&pwm_bl>;
         };
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
index 1dee641e3ea1..b75c1ec686ad 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-de2-mixer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner Display Engine 2.0 Mixer Device Tree Bindings
+title: Allwinner Display Engine 2.0 Mixer
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -19,6 +19,8 @@ properties:
       - allwinner,sun8i-r40-de2-mixer-0
       - allwinner,sun8i-r40-de2-mixer-1
       - allwinner,sun8i-v3s-de2-mixer
+      - allwinner,sun20i-d1-de2-mixer-0
+      - allwinner,sun20i-d1-de2-mixer-1
       - allwinner,sun50i-a64-de2-mixer-0
       - allwinner,sun50i-a64-de2-mixer-1
       - allwinner,sun50i-h6-de3-mixer-0
@@ -36,39 +38,29 @@ properties:
       - const: bus
       - const: mod
 
+  iommus:
+    maxItems: 1
+
   resets:
     maxItems: 1
 
   ports:
-    type: object
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 4d6795690ac3..60fd927b5a06 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings
+title: Allwinner A83t DWC HDMI TX Encoder
 
 description: |
   The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller
@@ -12,8 +12,8 @@ description: |
   and CEC.
 
   These DT bindings follow the Synopsys DWC HDMI TX bindings defined
-  in Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with
-  the following device-specific properties.
+  in bridge/synopsys,dw-hdmi.yaml with the following device-specific
+  properties.
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -29,11 +29,11 @@ properties:
       - const: allwinner,sun50i-h6-dw-hdmi
 
       - items:
-        - enum:
-          - allwinner,sun8i-h3-dw-hdmi
-          - allwinner,sun8i-r40-dw-hdmi
-          - allwinner,sun50i-a64-dw-hdmi
-        - const: allwinner,sun8i-a83t-dw-hdmi
+          - enum:
+              - allwinner,sun8i-h3-dw-hdmi
+              - allwinner,sun8i-r40-dw-hdmi
+              - allwinner,sun50i-a64-dw-hdmi
+          - const: allwinner,sun8i-a83t-dw-hdmi
 
   reg:
     maxItems: 1
@@ -46,7 +46,6 @@ properties:
 
   clocks:
     minItems: 3
-    maxItems: 6
     items:
       - description: Bus Clock
       - description: Register Clock
@@ -57,7 +56,6 @@ properties:
 
   clock-names:
     minItems: 3
-    maxItems: 6
     items:
       - const: iahb
       - const: isfr
@@ -68,14 +66,12 @@ properties:
 
   resets:
     minItems: 1
-    maxItems: 2
     items:
       - description: HDMI Controller Reset
       - description: HDCP Reset
 
   reset-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: ctrl
       - const: hdcp
@@ -93,38 +89,25 @@ properties:
       The VCC power supply of the controller
 
   ports:
-    type: object
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller. Usually the associated
           TCON.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller. Usually an HDMI
           connector.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -191,7 +174,6 @@ examples:
         phy-names = "phy";
         pinctrl-names = "default";
         pinctrl-0 = <&hdmi_pins>;
-        status = "disabled";
 
         ports {
             #address-cells = <1>;
@@ -250,7 +232,6 @@ examples:
         phy-names = "phy";
         pinctrl-names = "default";
         pinctrl-0 = <&hdmi_pins>;
-        status = "disabled";
 
         ports {
             #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
index 501cec16168c..1b47f3d99a78 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-hdmi-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t HDMI PHY Device Tree Bindings
+title: Allwinner A83t HDMI PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -27,7 +27,6 @@ properties:
 
   clocks:
     minItems: 2
-    maxItems: 4
     items:
       - description: Bus Clock
       - description: Module Clock
@@ -36,7 +35,6 @@ properties:
 
   clock-names:
     minItems: 2
-    maxItems: 4
     items:
       - const: bus
       - const: mod
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
index b98ca609824b..7d849c4095a3 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-r40-tcon-top.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner R40 TCON TOP Device Tree Bindings
+title: Allwinner R40 TCON TOP
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -41,6 +41,7 @@ properties:
   compatible:
     enum:
       - allwinner,sun8i-r40-tcon-top
+      - allwinner,sun20i-d1-tcon-top
       - allwinner,sun50i-h6-tcon-top
 
   reg:
@@ -49,172 +50,58 @@ properties:
   clocks:
     minItems: 2
     maxItems: 6
-    items:
-      - description: The TCON TOP interface clock
-      - description: The TCON TOP TV0 clock
-      - description: The TCON TOP TVE0 clock
-      - description: The TCON TOP TV1 clock
-      - description: The TCON TOP TVE1 clock
-      - description: The TCON TOP MIPI DSI clock
 
   clock-names:
     minItems: 2
     maxItems: 6
-    items:
-      - const: bus
-      - const: tcon-tv0
-      - const: tve0
-      - const: tcon-tv1
-      - const: tve1
-      - const: dsi
 
   clock-output-names:
     minItems: 1
     maxItems: 3
-    description: >
-      The first item is the name of the clock created for the TV0
-      channel, the second item is the name of the TCON TV1 channel
-      clock and the third one is the name of the DSI channel clock.
 
   resets:
     maxItems: 1
 
   ports:
-    type: object
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
-      All ports should have only one endpoint connected to
-      remote endpoint.
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoint for Mixer 0 mux.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoint for Mixer 0 mux
 
-        properties:
-          "#address-cells":
-            const: 1
-
-          "#size-cells":
-            const: 0
-
-          reg: true
-
-        patternProperties:
-          "^endpoint@[0-9]$":
-            type: object
-
-            properties:
-              reg:
-                description: |
-                  ID of the target TCON
-
-            required:
-              - reg
-
-        required:
-          - "#address-cells"
-          - "#size-cells"
-
-        additionalProperties: false
-
       port@2:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoint for Mixer 1 mux.
 
       port@3:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoint for Mixer 1 mux
 
-        properties:
-          "#address-cells":
-            const: 1
-
-          "#size-cells":
-            const: 0
-
-          reg: true
-
-        patternProperties:
-          "^endpoint@[0-9]$":
-            type: object
-
-            properties:
-              reg:
-                description: |
-                  ID of the target TCON
-
-            required:
-              - reg
-
-        required:
-          - "#address-cells"
-          - "#size-cells"
-
-        additionalProperties: false
-
       port@4:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoint for HDMI mux.
 
-        properties:
-          "#address-cells":
-            const: 1
-
-          "#size-cells":
-            const: 0
-
-          reg: true
-
-        patternProperties:
-          "^endpoint@[0-9]$":
-            type: object
-
-            properties:
-              reg:
-                description: |
-                  ID of the target TCON
-
-            required:
-              - reg
-
-        required:
-          - "#address-cells"
-          - "#size-cells"
-
-        additionalProperties: false
-
       port@5:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoint for HDMI mux
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
       - port@4
       - port@5
 
-    additionalProperties: false
-
 required:
   - "#clock-cells"
   - compatible
@@ -227,32 +114,92 @@ required:
 
 additionalProperties: false
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: allwinner,sun50i-h6-tcon-top
-
-then:
-  properties:
-    clocks:
-      maxItems: 2
-
-    clock-output-names:
-      maxItems: 1
-
-else:
-  properties:
-    clocks:
-      minItems: 6
-
-    clock-output-names:
-      minItems: 3
-
-    ports:
-      required:
-        - port@2
-        - port@3
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-r40-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+            - description: The TCON TOP TVE0 clock
+            - description: The TCON TOP TV1 clock
+            - description: The TCON TOP TVE1 clock
+            - description: The TCON TOP MIPI DSI clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+            - const: tve0
+            - const: tcon-tv1
+            - const: tve1
+            - const: dsi
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
+            - description: TCON TV1 output clock name
+            - description: DSI output clock name
+
+        ports:
+          required:
+            - port@2
+            - port@3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun20i-d1-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+            - description: The TCON TOP TVE0 clock
+            - description: The TCON TOP MIPI DSI clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+            - const: tve0
+            - const: dsi
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
+            - description: DSI output clock name
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-h6-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
index 96de41d32b3e..193afee2c3c1 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun9i-a80-deu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 Detail Enhancement Unit Device Tree Bindings
+title: Allwinner A80 Detail Enhancement Unit
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -40,36 +40,23 @@ properties:
     maxItems: 1
 
   ports:
-    type: object
-    description: |
-      A ports node with endpoint definitions as defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller.
 
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
       - port@1
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index 0da42ab8fd3a..7cdffdb131ac 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -8,7 +8,10 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: /schemas/sound/name-prefix.yaml#
 
 description: |
   The Amlogic Meson Synopsys Designware Integration is composed of
@@ -81,12 +84,12 @@ properties:
     description: phandle to an external 5V regulator to power the HDMI logic
 
   port@0:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
       A port node pointing to the VENC Input port node.
 
   port@1:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
       A port node pointing to the TMDS Output port node.
 
@@ -99,6 +102,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - compatible
   - reg
@@ -145,4 +150,3 @@ examples:
              };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index d1205a6697a0..6655a93b1874 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson Display Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic Meson Display controller is composed of several components
@@ -71,24 +71,28 @@ properties:
     maxItems: 2
 
   reg-names:
-   items:
-     - const: vpu
-     - const: hhi
+    items:
+      - const: vpu
+      - const: hhi
 
   interrupts:
     maxItems: 1
 
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   power-domains:
     maxItems: 1
     description: phandle to the associated power domain
 
   port@0:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
       A port node pointing to the CVBS VDAC port node.
 
   port@1:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
     description:
       A port node pointing to the HDMI-TX port node.
 
@@ -106,6 +110,9 @@ required:
   - port@1
   - "#address-cells"
   - "#size-cells"
+  - amlogic,canvas
+
+additionalProperties: false
 
 examples:
   - |
@@ -116,6 +123,7 @@ examples:
         interrupts = <3>;
         #address-cells = <1>;
         #size-cells = <0>;
+        amlogic,canvas = <&canvas>;
 
         /* CVBS VDAC output port */
         port@0 {
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.txt b/Documentation/devicetree/bindings/display/arm,hdlcd.txt
deleted file mode 100644
index 78bc24296f3e..000000000000
--- a/Documentation/devicetree/bindings/display/arm,hdlcd.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-ARM HDLCD
-
-This is a display controller found on several development platforms produced
-by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB
-streamer that reads the data from a framebuffer and sends it to a single
-digital encoder (DVI or HDMI).
-
-Required properties:
-  - compatible: "arm,hdlcd"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: One interrupt used by the display controller to notify the
-    interrupt controller when any of the interrupt sources programmed in
-    the interrupt mask register have activated.
-  - clocks: A list of phandle + clock-specifier pairs, one for each
-    entry in 'clock-names'.
-  - clock-names: A list of clock names. For HDLCD it should contain:
-      - "pxlclk" for the clock feeding the output PLL of the controller.
-
-Required sub-nodes:
-  - port: The HDLCD connection to an encoder chip. The connection is modeled
-    using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt.
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be
-    used for the framebuffer; if not present, the framebuffer may be located
-    anywhere in memory.
-
-
-Example:
-
-/ {
-	...
-
-	hdlcd@2b000000 {
-		compatible = "arm,hdlcd";
-		reg = <0 0x2b000000 0 0x1000>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&oscclk5>;
-		clock-names = "pxlclk";
-		port {
-			hdlcd_output: endpoint@0 {
-				remote-endpoint = <&hdmi_enc_input>;
-			};
-		};
-	};
-
-	/* HDMI encoder on I2C bus */
-	i2c@7ffa0000 {
-		....
-		hdmi-transmitter@70 {
-			compatible = ".....";
-			reg = <0x70>;
-			port@0 {
-				hdmi_enc_input: endpoint {
-					remote-endpoint = <&hdlcd_output>;
-				};
-
-				hdmi_enc_output: endpoint {
-					remote-endpoint = <&hdmi_1_port>;
-				};
-			};
-		};
-
-	};
-
-	hdmi1: connector@1 {
-		compatible = "hdmi-connector";
-		type = "a";
-		port {
-			hdmi_1_port: endpoint {
-				remote-endpoint = <&hdmi_enc_output>;
-			};
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.yaml b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
new file mode 100644
index 000000000000..a2670258c48d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,hdlcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm HDLCD display controller binding
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm HDLCD is a display controller found on several development platforms
+  produced by ARM Ltd and in more modern of its Fast Models. The HDLCD is an
+  RGB streamer that reads the data from a framebuffer and sends it to a single
+  digital encoder (DVI or HDMI).
+
+properties:
+  compatible:
+    const: arm,hdlcd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: pxlclk
+
+  clocks:
+    maxItems: 1
+    description: The input reference for the pixel clock.
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  iommus:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - port
+
+examples:
+  - |
+    hdlcd@2b000000 {
+        compatible = "arm,hdlcd";
+        reg = <0x2b000000 0x1000>;
+        interrupts = <0 85 4>;
+        clocks = <&oscclk5>;
+        clock-names = "pxlclk";
+        port {
+            hdlcd_output: endpoint {
+                remote-endpoint = <&hdmi_enc_input>;
+            };
+        };
+    };
+
+    /* HDMI encoder on I2C bus */
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hdmi-transmitter@70 {
+            compatible = "nxp,tda998x";
+            reg = <0x70>;
+            port {
+                hdmi_enc_input: endpoint {
+                    remote-endpoint = <&hdlcd_output>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt
deleted file mode 100644
index 8513695ee47f..000000000000
--- a/Documentation/devicetree/bindings/display/arm,komeda.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device Tree bindings for Arm Komeda display driver
-
-Required properties:
-- compatible: Should be "arm,mali-d71"
-- reg: Physical base address and length of the registers in the system
-- interrupts: the interrupt line number of the device in the system
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: A list of clock names. It should contain:
-      - "aclk": for the main processor clock
-- #address-cells: Must be 1
-- #size-cells: Must be 0
-- iommus: configure the stream id to IOMMU, Must be configured if want to
-    enable iommu in display. for how to configure this node please reference
-        devicetree/bindings/iommu/arm,smmu-v3.txt,
-        devicetree/bindings/iommu/iommu.txt
-
-Required properties for sub-node: pipeline@nq
-Each device contains one or two pipeline sub-nodes (at least one), each
-pipeline node should provide properties:
-- reg: Zero-indexed identifier for the pipeline
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: should contain:
-      - "pxclk": pixel clock
-
-- port: each pipeline connect to an encoder input port. The connection is
-    modeled using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for the framebuffer; if not present, the framebuffer may
-    be located anywhere in memory.
-
-Example:
-/ {
-	...
-
-	dp0: display@c00000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "arm,mali-d71";
-		reg = <0xc00000 0x20000>;
-		interrupts = <0 168 4>;
-		clocks = <&dpu_aclk>;
-		clock-names = "aclk";
-		iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
-			<&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
-			<&smmu 8>, <&smmu 9>;
-
-		dp0_pipe0: pipeline@0 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <0>;
-
-			port {
-				dp0_pipe0_out: endpoint {
-					remote-endpoint = <&db_dvi0_in>;
-				};
-			};
-		};
-
-		dp0_pipe1: pipeline@1 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <1>;
-
-			port {
-				dp0_pipe1_out: endpoint {
-					remote-endpoint = <&db_dvi1_in>;
-				};
-			};
-		};
-	};
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.yaml b/Documentation/devicetree/bindings/display/arm,komeda.yaml
new file mode 100644
index 000000000000..3ad3eef89ca8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,komeda.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,komeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Komeda display processor
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm Mali D71 display processor supports up to two displays with up
+  to a 4K resolution each. Each pipeline can be composed of up to four
+  layers. It is typically connected to a digital display connector like HDMI.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,mali-d32
+          - const: arm,mali-d71
+      - const: arm,mali-d71
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: aclk
+
+  clocks:
+    maxItems: 1
+    description: The main DPU processor clock
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  iommus:
+    description:
+      The stream IDs for each of the used pipelines, each four IDs for the
+      four layers, plus one for the write-back stream.
+    minItems: 5
+    maxItems: 10
+
+patternProperties:
+  '^pipeline@[01]$':
+    type: object
+    additionalProperties: false
+    description:
+      clocks
+
+    properties:
+      reg:
+        enum: [ 0, 1 ]
+
+      clock-names:
+        const: pxclk
+
+      clocks:
+        maxItems: 1
+        description: The input reference for the pixel clock.
+
+      port:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - pipeline@0
+
+examples:
+  - |
+    display@c00000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "arm,mali-d71";
+        reg = <0xc00000 0x20000>;
+        interrupts = <168>;
+        clocks = <&dpu_aclk>;
+        clock-names = "aclk";
+        iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
+                 <&smmu 8>,
+                 <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
+                 <&smmu 9>;
+
+        dp0_pipe0: pipeline@0 {
+            clocks = <&fpgaosc2>;
+            clock-names = "pxclk";
+            reg = <0>;
+
+            port {
+                dp0_pipe0_out: endpoint {
+                    remote-endpoint = <&db_dvi0_in>;
+                };
+            };
+        };
+
+        dp0_pipe1: pipeline@1 {
+            clocks = <&fpgaosc2>;
+            clock-names = "pxclk";
+            reg = <1>;
+
+            port {
+                dp0_pipe1_out: endpoint {
+                    remote-endpoint = <&db_dvi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
deleted file mode 100644
index 7a97a2b48c2a..000000000000
--- a/Documentation/devicetree/bindings/display/arm,malidp.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-ARM Mali-DP
-
-The following bindings apply to a family of Display Processors sold as
-licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
-DP650 processors that offer multiple composition layers, support for
-rotation and scaling output.
-
-Required properties:
-  - compatible: should be one of
-	"arm,mali-dp500"
-	"arm,mali-dp550"
-	"arm,mali-dp650"
-    depending on the particular implementation present in the hardware
-  - reg: Physical base address and size of the block of registers used by
-    the processor.
-  - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt,
-    interrupt client nodes.
-  - interrupt-names: name of the engine inside the processor that will
-    use the corresponding interrupt. Should be one of "DE" or "SE".
-  - clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-  - clock-names: A list of clock names. It should contain:
-      - "pclk": for the APB interface clock
-      - "aclk": for the AXI interface clock
-      - "mclk": for the main processor clock
-      - "pxlclk": for the pixel clock feeding the output PLL of the processor.
-  - arm,malidp-output-port-lines: Array of u8 values describing the number
-    of output lines per channel (R, G and B).
-
-Required sub-nodes:
-  - port: The Mali DP connection to an encoder input port. The connection
-    is modelled using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for the framebuffer; if not present, the framebuffer may
-    be located anywhere in memory.
-  - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS
-    levels of DP500's QoS signaling.
-
-
-Example:
-
-/ {
-	...
-
-	dp0: malidp@6f200000 {
-		compatible = "arm,mali-dp650";
-		reg = <0 0x6f200000 0 0x20000>;
-		memory-region = <&display_reserved>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 168 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "DE", "SE";
-		clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
-		clock-names = "pxlclk", "mclk", "aclk", "pclk";
-		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
-		arm,malidp-arqos-high-level = <0xd000d000>;
-		port {
-			dp0_output: endpoint {
-				remote-endpoint = <&tda998x_2_input>;
-			};
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
new file mode 100644
index 000000000000..2a17ec6fc97c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,malidp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Mali Display Processor (Mali-DP) binding
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The following bindings apply to a family of Display Processors sold as
+  licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
+  DP650 processors that offer multiple composition layers, support for
+  rotation and scaling output.
+
+properties:
+  compatible:
+    enum:
+      - arm,mali-dp500
+      - arm,mali-dp550
+      - arm,mali-dp650
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description:
+          The interrupt used by the Display Engine (DE). Can be shared with
+          the interrupt for the Scaling Engine (SE), but it will have to be
+          listed individually.
+      - description:
+          The interrupt used by the Scaling Engine (SE). Can be shared with
+          the interrupt for the Display Engine (DE), but it will have to be
+          listed individually.
+
+  interrupt-names:
+    items:
+      - const: DE
+      - const: SE
+
+  clock-names:
+    items:
+      - const: pxlclk
+      - const: mclk
+      - const: aclk
+      - const: pclk
+
+  clocks:
+    items:
+      - description: the pixel clock feeding the output PLL of the processor
+      - description: the main processor clock
+      - description: the AXI interface clock
+      - description: the APB interface clock
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  arm,malidp-output-port-lines:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Number of output lines/bits for each colour channel.
+    items:
+      - description: number of output lines for the red channel (R)
+      - description: number of output lines for the green channel (G)
+      - description: number of output lines for the blue channel (B)
+
+  arm,malidp-arqos-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Quality-of-Service value for the display engine FIFOs, to write
+      into the RQOS register of the DP500.
+      See the ARM Mali-DP500 TRM for details on the encoding.
+      If omitted, the RQOS register will not be changed.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - port
+  - arm,malidp-output-port-lines
+
+examples:
+  - |
+    dp0: malidp@6f200000 {
+        compatible = "arm,mali-dp650";
+        reg = <0x6f200000 0x20000>;
+        memory-region = <&display_reserved>;
+        interrupts = <168>, <168>;
+        interrupt-names = "DE", "SE";
+        clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
+        clock-names = "pxlclk", "mclk", "aclk", "pclk";
+        arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+        arm,malidp-arqos-value = <0xd000d000>;
+
+        port {
+            dp0_output: endpoint {
+                remote-endpoint = <&tda998x_2_input>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt
deleted file mode 100644
index 3f977e72a200..000000000000
--- a/Documentation/devicetree/bindings/display/arm,pl11x.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-* ARM PrimeCell Color LCD Controller PL110/PL111
-
-See also Documentation/devicetree/bindings/arm/primecell.yaml
-
-Required properties:
-
-- compatible: must be one of:
-	"arm,pl110", "arm,primecell"
-	"arm,pl111", "arm,primecell"
-
-- reg: base address and size of the control registers block
-
-- interrupt-names: either the single entry "combined" representing a
-	combined interrupt output (CLCDINTR), or the four entries
-	"mbe", "vcomp", "lnbu", "fuf" representing the individual
-	CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts
-
-- interrupts: contains an interrupt specifier for each entry in
-	interrupt-names
-
-- clock-names: should contain "clcdclk" and "apb_pclk"
-
-- clocks: contains phandle and clock specifier pairs for the entries
-	in the clock-names property. See
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional properties:
-
-- memory-region: phandle to a node describing memory (see
-	Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-	to be used for the framebuffer; if not present, the framebuffer
-	may be located anywhere in the memory
-
-- max-memory-bandwidth: maximum bandwidth in bytes per second that the
-	cell's memory interface can handle; if not present, the memory
-	interface is fast enough to handle all possible video modes
-
-Required sub-nodes:
-
-- port: describes LCD panel signals, following the common binding
-	for video transmitter interfaces; see
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Deprecated properties:
-	The port's endbpoint subnode had this, now deprecated property
-	in the past. Drivers should be able to survive without it:
-
-	- arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values,
-		defining the way CLD pads are wired up; first value
-		contains index of the "CLD" external pin (pad) used
-		as R0 (first bit of the red component), second value
-	        index of the pad used as G0, third value index of the
-		pad used as B0, see also "LCD panel signal multiplexing
-		details" paragraphs in the PL110/PL111 Technical
-		Reference Manuals; this implicitly defines available
-		color modes, for example:
-		- PL111 TFT 4:4:4 panel:
-			arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
-		- PL110 TFT (1:)5:5:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
-		- PL111 TFT (1:)5:5:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
-		- PL111 TFT 5:6:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
-		- PL110 and PL111 TFT 8:8:8 panel:
-			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-		- PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
-			arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
-
-
-Example:
-
-	clcd@10020000 {
-		compatible = "arm,pl111", "arm,primecell";
-		reg = <0x10020000 0x1000>;
-		interrupt-names = "combined";
-		interrupts = <0 44 4>;
-		clocks = <&oscclk1>, <&oscclk2>;
-		clock-names = "clcdclk", "apb_pclk";
-		max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
-
-		port {
-			clcd_pads: endpoint {
-				remote-endpoint = <&clcd_panel>;
-			};
-		};
-
-	};
-
-	panel {
-		compatible = "panel-dpi";
-
-		port {
-			clcd_panel: endpoint {
-				remote-endpoint = <&clcd_pads>;
-			};
-		};
-
-		panel-timing {
-			clock-frequency = <25175000>;
-			hactive = <640>;
-			hback-porch = <40>;
-			hfront-porch = <24>;
-			hsync-len = <96>;
-			vactive = <480>;
-			vback-porch = <32>;
-			vfront-porch = <11>;
-			vsync-len = <2>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.yaml b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
new file mode 100644
index 000000000000..6cc9045e5c68
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,pl11x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm PrimeCell Color LCD Controller PL110/PL111
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm Primcell PL010/PL111 is an LCD controller IP, than scans out
+  a framebuffer region in system memory, and creates timed signals for
+  a variety of LCD panels.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl110
+          - arm,pl111
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,pl110
+          - arm,pl111
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupt-names:
+    oneOf:
+      - const: combined
+        description:
+          The IP provides four individual interrupt lines, but also one
+          combined line. If the integration only connects this line to the
+          interrupt controller, this single interrupt is noted here.
+      - items:
+          - const: mbe        # CLCDMBEINTR
+          - const: vcomp      # CLCDVCOMPINTR
+          - const: lnbu       # CLCDLNBUINTR
+          - const: fuf        # CLCDFUFINTR
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: clcdclk
+      - const: apb_pclk
+
+  clocks:
+    items:
+      - description: The CLCDCLK reference clock for the controller.
+      - description: The HCLK AHB slave clock for the register access.
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  max-memory-bandwidth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum bandwidth in bytes per second that the cell's memory interface
+      can handle.
+      If not present, the memory interface is fast enough to handle all
+      possible video modes.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
+
+        properties:
+          arm,pl11x,tft-r0g0b0-pads:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              - description: index of CLD pad used for first red bit (R0)
+              - description: index of CLD pad used for first green bit (G0)
+              - description: index of CLD pad used for first blue bit (G0)
+            deprecated: true
+            description: |
+              DEPRECATED. An array of three 32-bit values, defining the way
+              CLD[23:0] pads are wired up.
+              The first value contains the index of the "CLD" external pin (pad)
+              used as R0 (first bit of the red component), the second value for
+              green, the third value for blue.
+              See also "LCD panel signal multiplexing details" paragraphs in the
+              PL110/PL111 Technical Reference Manuals.
+              This implicitly defines available color modes, for example:
+              - PL111 TFT 4:4:4 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
+              - PL110 TFT (1:)5:5:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+              - PL111 TFT (1:)5:5:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
+              - PL111 TFT 5:6:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
+              - PL110 and PL111 TFT 8:8:8 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+              - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
+                  arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - port
+
+allOf:
+  - if:
+      properties:
+        interrupts:
+          minItems: 2
+      required:
+        - interrupts
+    then:
+      required:
+        - interrupt-names
+
+examples:
+  - |
+    clcd@10020000 {
+        compatible = "arm,pl111", "arm,primecell";
+        reg = <0x10020000 0x1000>;
+        interrupt-names = "combined";
+        interrupts = <44>;
+        clocks = <&oscclk1>, <&oscclk2>;
+        clock-names = "clcdclk", "apb_pclk";
+        max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
+
+        port {
+            clcd_pads: endpoint {
+                remote-endpoint = <&clcd_panel>;
+            };
+        };
+    };
+
+    panel {
+        compatible = "arm,rtsm-display";
+
+        port {
+            clcd_panel: endpoint {
+                remote-endpoint = <&clcd_pads>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt
index acb5a0132127..b5e355ada2fa 100644
--- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt
+++ b/Documentation/devicetree/bindings/display/atmel,lcdc.txt
@@ -9,7 +9,6 @@ Required properties:
 	"atmel,at91sam9g45-lcdc" ,
 	"atmel,at91sam9g45es-lcdc" ,
 	"atmel,at91sam9rl-lcdc" ,
-	"atmel,at32ap-lcdc"
 - reg : Should contain 1 register ranges(address and length).
 	Can contain an additional register range(address and length)
 	for fixed framebuffer memory. Useful for dedicated memories.
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
deleted file mode 100644
index 26649b4c4dd8..000000000000
--- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
+++ /dev/null
@@ -1,174 +0,0 @@
-Broadcom VC4 (VideoCore4) GPU
-
-The VC4 device present on the Raspberry Pi includes a display system
-with HDMI output and the HVS (Hardware Video Scaler) for compositing
-display planes.
-
-Required properties for VC4:
-- compatible:	Should be "brcm,bcm2835-vc4" or "brcm,cygnus-vc4"
-
-Required properties for Pixel Valve:
-- compatible:	Should be one of "brcm,bcm2835-pixelvalve0",
-		  "brcm,bcm2835-pixelvalve1", or "brcm,bcm2835-pixelvalve2"
-- reg:		Physical base address and length of the PV's registers
-- interrupts:	The interrupt number
-		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
-
-Required properties for HVS:
-- compatible:	Should be "brcm,bcm2835-hvs"
-- reg:		Physical base address and length of the HVS's registers
-- interrupts:	The interrupt number
-		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
-
-Required properties for HDMI
-- compatible:	Should be "brcm,bcm2835-hdmi"
-- reg:		Physical base address and length of the two register ranges
-		  ("HDMI" and "HD", in that order)
-- interrupts:	The interrupt numbers
-		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
-- ddc:		phandle of the I2C controller used for DDC EDID probing
-- clocks:	a) hdmi: The HDMI state machine clock
-		b) pixel: The pixel clock.
-
-Optional properties for HDMI:
-- hpd-gpios:	The GPIO pin for HDMI hotplug detect (if it doesn't appear
-		  as an interrupt/status bit in the HDMI controller
-		  itself).  See bindings/pinctrl/brcm,bcm2835-gpio.txt
-- dmas:		Should contain one entry pointing to the DMA channel used to
-		transfer audio data
-- dma-names:	Should contain "audio-rx"
-
-Required properties for DPI:
-- compatible:	Should be "brcm,bcm2835-dpi"
-- reg:		Physical base address and length of the registers
-- clocks:	a) core: The core clock the unit runs on
-		b) pixel: The pixel clock that feeds the pixelvalve
-- port:		Port node with a single endpoint connecting to the panel
-		  device, as defined in [1]
-
-Required properties for VEC:
-- compatible:	Should be "brcm,bcm2835-vec"
-- reg:		Physical base address and length of the registers
-- clocks:	The core clock the unit runs on
-- interrupts:	The interrupt number
-		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
-
-Required properties for V3D:
-- compatible:	Should be "brcm,bcm2835-v3d" or "brcm,cygnus-v3d"
-- reg:		Physical base address and length of the V3D's registers
-- interrupts:	The interrupt number
-		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
-
-Optional properties for V3D:
-- clocks:	The clock the unit runs on
-
-Required properties for DSI:
-- compatible:	Should be "brcm,bcm2835-dsi0" or "brcm,bcm2835-dsi1"
-- reg:		Physical base address and length of the DSI block's registers
-- interrupts:	The interrupt number
-		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
-- clocks:	a) phy: The DSI PLL clock feeding the DSI analog PHY
-		b) escape: The DSI ESC clock from CPRMAN
-		c) pixel: The DSI pixel clock from CPRMAN
-- clock-output-names:
-		The 3 clocks output from the DSI analog PHY: dsi[01]_byte,
-		dsi[01]_ddr2, and dsi[01]_ddr
-
-Required properties for the TXP (writeback) block:
-- compatible:	Should be "brcm,bcm2835-txp"
-- reg:		Physical base address and length of the TXP block's registers
-- interrupts:	The interrupt number
-		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
-
-[1] Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-pixelvalve@7e807000 {
-	compatible = "brcm,bcm2835-pixelvalve2";
-	reg = <0x7e807000 0x100>;
-	interrupts = <2 10>; /* pixelvalve */
-};
-
-hvs@7e400000 {
-	compatible = "brcm,bcm2835-hvs";
-	reg = <0x7e400000 0x6000>;
-	interrupts = <2 1>;
-};
-
-hdmi: hdmi@7e902000 {
-	compatible = "brcm,bcm2835-hdmi";
-	reg = <0x7e902000 0x600>,
-	      <0x7e808000 0x100>;
-	interrupts = <2 8>, <2 9>;
-	ddc = <&i2c2>;
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-	clocks = <&clocks BCM2835_PLLH_PIX>,
-		 <&clocks BCM2835_CLOCK_HSM>;
-	clock-names = "pixel", "hdmi";
-};
-
-dpi: dpi@7e208000 {
-	compatible = "brcm,bcm2835-dpi";
-	reg = <0x7e208000 0x8c>;
-	clocks = <&clocks BCM2835_CLOCK_VPU>,
-	         <&clocks BCM2835_CLOCK_DPI>;
-	clock-names = "core", "pixel";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	port {
-		dpi_out: endpoint@0 {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-dsi1: dsi@7e700000 {
-	compatible = "brcm,bcm2835-dsi1";
-	reg = <0x7e700000 0x8c>;
-	interrupts = <2 12>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	#clock-cells = <1>;
-
-	clocks = <&clocks BCM2835_PLLD_DSI1>,
-		 <&clocks BCM2835_CLOCK_DSI1E>,
-		 <&clocks BCM2835_CLOCK_DSI1P>;
-	clock-names = "phy", "escape", "pixel";
-
-	clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr";
-
-	pitouchscreen: panel@0 {
-		compatible = "raspberrypi,touchscreen";
-		reg = <0>;
-
-		<...>
-	};
-};
-
-vec: vec@7e806000 {
-	compatible = "brcm,bcm2835-vec";
-	reg = <0x7e806000 0x1000>;
-	clocks = <&clocks BCM2835_CLOCK_VEC>;
-	interrupts = <2 27>;
-};
-
-v3d: v3d@7ec00000 {
-	compatible = "brcm,bcm2835-v3d";
-	reg = <0x7ec00000 0x1000>;
-	interrupts = <1 10>;
-};
-
-vc4: gpu {
-	compatible = "brcm,bcm2835-vc4";
-};
-
-panel: panel {
-	compatible = "ontat,yx700wv03", "simple-panel";
-
-	port {
-		panel_in: endpoint {
-			remote-endpoint = <&dpi_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
new file mode 100644
index 000000000000..5b35adf34c7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711 HDMI Controller
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-hdmi0
+      - brcm,bcm2711-hdmi1
+
+  reg:
+    items:
+      - description: HDMI controller register range
+      - description: DVP register range
+      - description: HDMI PHY register range
+      - description: Rate Manager register range
+      - description: Packet RAM register range
+      - description: Metadata RAM register range
+      - description: CSC register range
+      - description: CEC register range
+      - description: HD register range
+
+  reg-names:
+    items:
+      - const: hdmi
+      - const: dvp
+      - const: phy
+      - const: rm
+      - const: packet
+      - const: metadata
+      - const: csc
+      - const: cec
+      - const: hd
+
+  clocks:
+    items:
+      - description: The HDMI state machine clock
+      - description: The Pixel BVB clock
+      - description: The HDMI Audio parent clock
+      - description: The HDMI CEC parent clock
+
+  clock-names:
+    items:
+      - const: hdmi
+      - const: bvb
+      - const: audio
+      - const: cec
+
+  interrupts:
+    items:
+      - description: CEC TX interrupt
+      - description: CEC RX interrupt
+      - description: CEC stuck at low interrupt
+      - description: Wake-up interrupt
+      - description: Hotplug connected interrupt
+      - description: Hotplug removed interrupt
+
+  interrupt-names:
+    items:
+      - const: cec-tx
+      - const: cec-rx
+      - const: cec-low
+      - const: wakeup
+      - const: hpd-connected
+      - const: hpd-removed
+
+  ddc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      Phandle of the I2C controller used for DDC EDID probing
+
+  hpd-gpios:
+    maxItems: 1
+    description: >
+      The GPIO pin for the HDMI hotplug detect (if it doesn't appear
+      as an interrupt/status bit in the HDMI controller itself)
+
+  dmas:
+    maxItems: 1
+    description: >
+      Should contain one entry pointing to the DMA channel used to
+      transfer audio data.
+
+  dma-names:
+    const: audio-rx
+
+  resets:
+    maxItems: 1
+
+  wifi-2.4ghz-coexistence:
+    type: boolean
+    description: >
+      Should the pixel frequencies in the WiFi frequencies range be
+      avoided?
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - ddc
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi0: hdmi@7ef00700 {
+        compatible = "brcm,bcm2711-hdmi0";
+        reg = <0x7ef00700 0x300>,
+              <0x7ef00300 0x200>,
+              <0x7ef00f00 0x80>,
+              <0x7ef00f80 0x80>,
+              <0x7ef01b00 0x200>,
+              <0x7ef01f00 0x400>,
+              <0x7ef00200 0x80>,
+              <0x7ef04300 0x100>,
+              <0x7ef20000 0x100>;
+        reg-names = "hdmi",
+                    "dvp",
+                    "phy",
+                    "rm",
+                    "packet",
+                    "metadata",
+                    "csc",
+                    "cec",
+                    "hd";
+        clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+        clock-names = "hdmi", "bvb", "audio", "cec";
+        resets = <&dvp 0>;
+        ddc = <&ddc0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml
new file mode 100644
index 000000000000..c9ad0ecc9b6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) DPI Controller
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    const: brcm,bcm2835-dpi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The core clock the unit runs on
+      - description: The pixel clock that feeds the pixelvalve
+
+  clock-names:
+    items:
+      - const: core
+      - const: pixel
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Port node with a single endpoint connecting to the panel.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    dpi: dpi@7e208000 {
+        compatible = "brcm,bcm2835-dpi";
+        reg = <0x7e208000 0x8c>;
+        clocks = <&clocks BCM2835_CLOCK_VPU>,
+                 <&clocks BCM2835_CLOCK_DPI>;
+        clock-names = "core", "pixel";
+
+        port {
+            dpi_out: endpoint {
+                remote-endpoint = <&panel_in>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
new file mode 100644
index 000000000000..c8b2459d64f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-dsi0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) DSI Controller
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+allOf:
+  - $ref: dsi-controller.yaml#
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - brcm,bcm2711-dsi1
+      - brcm,bcm2835-dsi0
+      - brcm,bcm2835-dsi1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The DSI PLL clock feeding the DSI analog PHY
+      - description: The DSI ESC clock
+      - description: The DSI pixel clock
+
+  clock-names:
+    items:
+      - const: phy
+      - const: escape
+      - const: pixel
+
+  clock-output-names: true
+    # FIXME: The meta-schemas don't seem to allow it for now
+    # items:
+    #   - description: The DSI byte clock for the PHY
+    #   - description: The DSI DDR2 clock
+    #   - description: The DSI DDR clock
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-output-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    dsi1: dsi@7e700000 {
+        compatible = "brcm,bcm2835-dsi1";
+        reg = <0x7e700000 0x8c>;
+        interrupts = <2 12>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #clock-cells = <1>;
+
+        clocks = <&clocks BCM2835_PLLD_DSI1>,
+                 <&clocks BCM2835_CLOCK_DSI1E>,
+                 <&clocks BCM2835_CLOCK_DSI1P>;
+        clock-names = "phy", "escape", "pixel";
+
+        clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr";
+
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
new file mode 100644
index 000000000000..48c8cad0d96d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) HDMI Controller
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    const: brcm,bcm2835-hdmi
+
+  reg:
+    items:
+      - description: HDMI register range
+      - description: HD register range
+
+  interrupts:
+    minItems: 2
+
+  clocks:
+    items:
+      - description: The pixel clock
+      - description: The HDMI state machine clock
+
+  clock-names:
+    items:
+      - const: pixel
+      - const: hdmi
+
+  ddc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      Phandle of the I2C controller used for DDC EDID probing
+
+  hpd-gpios:
+    maxItems: 1
+    description: >
+      The GPIO pin for the HDMI hotplug detect (if it doesn't appear
+      as an interrupt/status bit in the HDMI controller itself)
+
+  dmas:
+    maxItems: 1
+    description: >
+      Should contain one entry pointing to the DMA channel used to
+      transfer audio data.
+
+  dma-names:
+    const: audio-rx
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - ddc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    hdmi: hdmi@7e902000 {
+        compatible = "brcm,bcm2835-hdmi";
+        reg = <0x7e902000 0x600>,
+              <0x7e808000 0x100>;
+        interrupts = <2 8>, <2 9>;
+        ddc = <&i2c2>;
+        hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+        clocks = <&clocks BCM2835_PLLH_PIX>,
+                 <&clocks BCM2835_CLOCK_HSM>;
+        clock-names = "pixel", "hdmi";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
new file mode 100644
index 000000000000..2e8566f47e63
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) Hardware Video Scaler
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-hvs
+      - brcm,bcm2835-hvs
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Core Clock
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: brcm,bcm2711-hvs
+
+then:
+  required:
+    - clocks
+
+examples:
+  - |
+    hvs@7e400000 {
+        compatible = "brcm,bcm2835-hvs";
+        reg = <0x7e400000 0x6000>;
+        interrupts = <2 1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
new file mode 100644
index 000000000000..4e1ba03f6477
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-pixelvalve0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) PixelValve
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-pixelvalve0
+      - brcm,bcm2835-pixelvalve1
+      - brcm,bcm2835-pixelvalve2
+      - brcm,bcm2711-pixelvalve0
+      - brcm,bcm2711-pixelvalve1
+      - brcm,bcm2711-pixelvalve2
+      - brcm,bcm2711-pixelvalve3
+      - brcm,bcm2711-pixelvalve4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    pixelvalve@7e807000 {
+        compatible = "brcm,bcm2835-pixelvalve2";
+        reg = <0x7e807000 0x100>;
+        interrupts = <2 10>; /* pixelvalve */
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
new file mode 100644
index 000000000000..bb186197e471
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-txp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) TXP (writeback) Controller
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    const: brcm,bcm2835-txp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    txp: txp@7e004000 {
+        compatible = "brcm,bcm2835-txp";
+        reg = <0x7e004000 0x20>;
+        interrupts = <1 11>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml
new file mode 100644
index 000000000000..c55a8217de25
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-v3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) V3D GPU
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-v3d
+      - brcm,cygnus-v3d
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    v3d: v3d@7ec00000 {
+        compatible = "brcm,bcm2835-v3d";
+        reg = <0x7ec00000 0x1000>;
+        interrupts = <1 10>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
new file mode 100644
index 000000000000..49a5e041aa49
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-vc4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) GPU
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+description: >
+  The VC4 device present on the Raspberry Pi includes a display system
+  with HDMI output and the HVS (Hardware Video Scaler) for compositing
+  display planes.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-vc5
+      - brcm,bcm2835-vc4
+      - brcm,cygnus-vc4
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    vc4: gpu {
+        compatible = "brcm,bcm2835-vc4";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml
new file mode 100644
index 000000000000..5d921e30394e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-vec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) VEC
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-vec
+      - brcm,bcm2835-vec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    vec: vec@7e806000 {
+        compatible = "brcm,bcm2835-vec";
+        reg = <0x7e806000 0x1000>;
+        clocks = <&clocks BCM2835_CLOCK_VEC>;
+        interrupts = <2 27>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt
deleted file mode 100644
index a6b2b2b8f3d9..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Analog Device ADV7123 Video DAC
--------------------------------
-
-The ADV7123 is a digital-to-analog converter that outputs VGA signals from a
-parallel video input.
-
-Required properties:
-
-- compatible: Should be "adi,adv7123"
-
-Optional properties:
-
-- psave-gpios: Power save control GPIO
-
-Required nodes:
-
-The ADV7123 has two video ports. Their connections are modeled using the OF
-graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-- Video port 0 for DPI input
-- Video port 1 for VGA output
-
-
-Example
--------
-
-	adv7123: encoder@0 {
-		compatible = "adi,adv7123";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				adv7123_in: endpoint@0 {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				adv7123_out: endpoint@0 {
-					remote-endpoint = <&vga_connector_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
deleted file mode 100644
index 2c887536258c..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ /dev/null
@@ -1,142 +0,0 @@
-Analog Device ADV7511(W)/13/33 HDMI Encoders
------------------------------------------
-
-The ADV7511, ADV7511W, ADV7513 and ADV7533 are HDMI audio and video transmitters
-compatible with HDMI 1.4 and DVI 1.0. They support color space conversion,
-S/PDIF, CEC and HDCP. ADV7533 supports the DSI interface for input pixels, while
-the others support RGB interface.
-
-Required properties:
-
-- compatible: Should be one of:
-		"adi,adv7511"
-		"adi,adv7511w"
-		"adi,adv7513"
-		"adi,adv7533"
-
-- reg: I2C slave addresses
-  The ADV7511 internal registers are split into four pages exposed through
-  different I2C addresses, creating four register maps. Each map has it own
-  I2C address and acts as a standard slave device on the I2C bus. The main
-  address is mandatory, others are optional and revert to defaults if not
-  specified.
-
-
-The ADV7511 supports a large number of input data formats that differ by their
-color depth, color format, clock mode, bit justification and random
-arrangement of components on the data bus. The combination of the following
-properties describe the input and map directly to the video input tables of the
-ADV7511 datasheet that document all the supported combinations.
-
-- adi,input-depth: Number of bits per color component at the input (8, 10 or
-  12).
-- adi,input-colorspace: The input color space, one of "rgb", "yuv422" or
-  "yuv444".
-- adi,input-clock: The input clock type, one of "1x" (one clock cycle per
-  pixel), "2x" (two clock cycles per pixel), "ddr" (one clock cycle per pixel,
-  data driven on both edges).
-
-The following input format properties are required except in "rgb 1x" and
-"yuv444 1x" modes, in which case they must not be specified.
-
-- adi,input-style: The input components arrangement variant (1, 2 or 3), as
-  listed in the input format tables in the datasheet.
-- adi,input-justification: The input bit justification ("left", "evenly",
-  "right").
-
-- avdd-supply: A 1.8V supply that powers up the AVDD pin on the chip.
-- dvdd-supply: A 1.8V supply that powers up the DVDD pin on the chip.
-- pvdd-supply: A 1.8V supply that powers up the PVDD pin on the chip.
-- dvdd-3v-supply: A 3.3V supply that powers up the pin called DVDD_3V
-  on the chip.
-- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is
-  needed only for ADV7511.
-
-The following properties are required for ADV7533:
-
-- adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should
-  be one of 1, 2, 3 or 4.
-- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip.
-- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip.
-- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be
-  either 1.2V or 1.8V.
-
-Optional properties:
-
-- interrupts: Specifier for the ADV7511 interrupt
-- pd-gpios: Specifier for the GPIO connected to the power down signal
-
-- adi,clock-delay: Video data clock delay relative to the pixel clock, in ps
-  (-1200 ps .. 1600 ps). Defaults to no delay.
-- adi,embedded-sync: The input uses synchronization signals embedded in the
-  data stream (similar to BT.656). Defaults to separate H/V synchronization
-  signals.
-- adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
-  generator. The chip will rely on the sync signals in the DSI data lanes,
-  rather than generate its own timings for HDMI output.
-- clocks: from common clock binding: reference to the CEC clock.
-- clock-names: from common clock binding: must be "cec".
-- reg-names : Names of maps with programmable addresses.
-	It can contain any map needing a non-default address.
-	Possible maps names are : "main", "edid", "cec", "packet"
-
-Required nodes:
-
-The ADV7511 has two video ports. Their connections are modelled using the OF
-graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533, the
-  remote endpoint phandle should be a reference to a valid mipi_dsi_host device
-  node.
-- Video port 1 for the HDMI output
-- Audio port 2 for the HDMI audio input
-
-
-Example
--------
-
-	adv7511w: hdmi@39 {
-		compatible = "adi,adv7511w";
-		/*
-		 * The EDID page will be accessible on address 0x66 on the I2C
-		 * bus. All other maps continue to use their default addresses.
-		 */
-		reg = <0x39>, <0x66>;
-		reg-names = "main", "edid";
-		interrupt-parent = <&gpio3>;
-		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
-		clocks = <&cec_clock>;
-		clock-names = "cec";
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7511w_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				adv7511_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				codec_endpoint: endpoint {
-					remote-endpoint = <&i2s0_cpu_endpoint>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
new file mode 100644
index 000000000000..5bbe81862c8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV7511/11W/13 HDMI Encoders
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The ADV7511, ADV7511W and ADV7513 are HDMI audio and video
+  transmitters compatible with HDMI 1.4 and DVI 1.0. They support color
+  space conversion, S/PDIF, CEC and HDCP. The transmitter input is
+  parallel RGB or YUV data.
+
+properties:
+  compatible:
+    enum:
+      - adi,adv7511
+      - adi,adv7511w
+      - adi,adv7513
+
+  reg:
+    description: |
+      I2C slave addresses.
+
+      The ADV7511/11W/13 internal registers are split into four pages
+      exposed through different I2C addresses, creating four register
+      maps. Each map has it own I2C address and acts as a standard slave
+      device on the I2C bus. The main address is mandatory, others are
+      optional and revert to defaults if not specified.
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    description:
+      Names of maps with programmable addresses. It can contain any map
+      needing a non-default address.
+    minItems: 1
+    items:
+      - const: main
+      - const: edid
+      - const: cec
+      - const: packet
+
+  clocks:
+    description: Reference to the CEC clock.
+    maxItems: 1
+
+  clock-names:
+    const: cec
+
+  interrupts:
+    maxItems: 1
+
+  pd-gpios:
+    description: GPIO connected to the power down signal.
+    maxItems: 1
+
+  avdd-supply:
+    description: A 1.8V supply that powers up the AVDD pin.
+
+  dvdd-supply:
+    description: A 1.8V supply that powers up the DVDD pin.
+
+  pvdd-supply:
+    description: A 1.8V supply that powers up the PVDD pin.
+
+  dvdd-3v-supply:
+    description: A 3.3V supply that powers up the DVDD_3V pin.
+
+  bgvdd-supply:
+    description: A 1.8V supply that powers up the BGVDD pin.
+
+  adi,input-depth:
+    description: Number of bits per color component at the input.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 10, 12 ]
+
+  adi,input-colorspace:
+    description: Input color space.
+    enum: [ rgb, yuv422, yuv444 ]
+
+  adi,input-clock:
+    description: |
+      Input clock type.
+        "1x": one clock cycle per pixel
+        "2x": two clock cycles per pixel
+        "dd": one clock cycle per pixel, data driven on both edges
+    enum: [ 1x, 2x, dd ]
+
+  adi,clock-delay:
+    description:
+      Video data clock delay relative to the pixel clock, in ps
+      (-1200ps .. 1600 ps).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  adi,embedded-sync:
+    description:
+      If defined, the input uses synchronization signals embedded in the
+      data stream (similar to BT.656).
+    type: boolean
+
+  adi,input-style:
+    description:
+      Input components arrangement variant as listed in the input
+      format tables in the datasheet.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 3 ]
+
+  adi,input-justification:
+    description: Input bit justification.
+    enum: [ left, evenly, right ]
+
+  ports:
+    description:
+      The ADV7511(W)/13 has two video ports and one audio port.
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        description: Video port for the RGB or YUV input.
+        $ref: /schemas/graph.yaml#/properties/port
+
+      port@1:
+        description: Video port for the HDMI output.
+        $ref: /schemas/graph.yaml#/properties/port
+
+      port@2:
+        description: Audio port for the HDMI output.
+        $ref: /schemas/graph.yaml#/properties/port
+
+# adi,input-colorspace and adi,input-clock are required except in
+# "rgb 1x" and "yuv444 1x" modes, in which case they must not be
+# specified.
+if:
+  not:
+    properties:
+      adi,input-colorspace:
+        contains:
+          enum: [ rgb, yuv444 ]
+      adi,input-clock:
+        contains:
+          const: 1x
+
+then:
+  required:
+    - adi,input-style
+    - adi,input-justification
+
+else:
+  properties:
+    adi,input-style: false
+    adi,input-justification: false
+
+
+required:
+  - compatible
+  - reg
+  - ports
+  - adi,input-depth
+  - adi,input-colorspace
+  - adi,input-clock
+  - avdd-supply
+  - dvdd-supply
+  - pvdd-supply
+  - dvdd-3v-supply
+  - bgvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c@e6500000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        reg = <0 0xe6500000>;
+
+        adv7511w: hdmi@39 {
+            compatible = "adi,adv7511w";
+            /*
+             * The EDID page will be accessible on address 0x66 on the I2C
+             * bus. All other maps continue to use their default addresses.
+             */
+            reg = <0x39>, <0x66>;
+            reg-names = "main", "edid";
+            interrupt-parent = <&gpio3>;
+            interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+            clocks = <&cec_clock>;
+            clock-names = "cec";
+            avdd-supply = <&v1v8>;
+            dvdd-supply = <&v1v8>;
+            pvdd-supply = <&v1v8>;
+            dvdd-3v-supply = <&v3v3>;
+            bgvdd-supply = <&v1v8>;
+
+            adi,input-depth = <8>;
+            adi,input-colorspace = "yuv422";
+            adi,input-clock = "1x";
+
+            adi,input-style = <3>;
+            adi,input-justification = "right";
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    adv7511w_in: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    adv7511_out: endpoint {
+                        remote-endpoint = <&hdmi_connector_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    codec_endpoint: endpoint {
+                        remote-endpoint = <&i2s0_cpu_endpoint>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
new file mode 100644
index 000000000000..987aa83c2649
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/adi,adv7533.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV7533/35 HDMI Encoders
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The ADV7533 and ADV7535 are HDMI audio and video transmitters
+  compatible with HDMI 1.4 and DVI 1.0. They support color space
+  conversion, S/PDIF, CEC and HDCP. The transmitter input is MIPI DSI.
+
+properties:
+  compatible:
+    enum:
+      - adi,adv7533
+      - adi,adv7535
+
+  reg:
+    description: |
+      I2C slave addresses.
+
+      The ADV7533/35 internal registers are split into four pages
+      exposed through different I2C addresses, creating four register
+      maps. Each map has it own I2C address and acts as a standard slave
+      device on the I2C bus. The main address is mandatory, others are
+      optional and revert to defaults if not specified.
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    description:
+      Names of maps with programmable addresses. It can contain any map
+      needing a non-default address.
+    minItems: 1
+    items:
+      - const: main
+      - const: edid
+      - const: cec
+      - const: packet
+
+  clocks:
+    description: Reference to the CEC clock.
+    maxItems: 1
+
+  clock-names:
+    const: cec
+
+  interrupts:
+    maxItems: 1
+
+  pd-gpios:
+    description: GPIO connected to the power down signal.
+    maxItems: 1
+
+  avdd-supply:
+    description: A 1.8V supply that powers up the AVDD pin.
+
+  dvdd-supply:
+    description: A 1.8V supply that powers up the DVDD pin.
+
+  pvdd-supply:
+    description: A 1.8V supply that powers up the PVDD pin.
+
+  a2vdd-supply:
+    description: A 1.8V supply that powers up the A2VDD pin.
+
+  v3p3-supply:
+    description: A 3.3V supply that powers up the V3P3 pin.
+
+  v1p2-supply:
+    description:
+      A supply that powers up the V1P2 pin. It can be either 1.2V
+      or 1.8V for ADV7533 but only 1.8V for ADV7535.
+
+  adi,disable-timing-generator:
+    description:
+      Disables the internal timing generator. The chip will rely on the
+      sync signals in the DSI data lanes, rather than generating its own
+      timings for HDMI output.
+    type: boolean
+
+  adi,dsi-lanes:
+    description: Number of DSI data lanes connected to the DSI host.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 3, 4 ]
+
+  ports:
+    description:
+      The ADV7533/35 has two video ports and one audio port.
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        description:
+          Video port for the DSI input. The remote endpoint phandle
+          should be a reference to a valid mipi_dsi_host_device.
+        $ref: /schemas/graph.yaml#/properties/port
+
+      port@1:
+        description: Video port for the HDMI output.
+        $ref: /schemas/graph.yaml#/properties/port
+
+      port@2:
+        description: Audio port for the HDMI output.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - ports
+  - adi,dsi-lanes
+  - avdd-supply
+  - dvdd-supply
+  - pvdd-supply
+  - a2vdd-supply
+  - v3p3-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c@e6500000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        reg = <0 0xe6500000>;
+
+        adv7533: hdmi@39 {
+            compatible = "adi,adv7533";
+            /*
+             * The EDID page will be accessible on address 0x66 on the I2C
+             * bus. All other maps continue to use their default addresses.
+             */
+            reg = <0x39>, <0x66>;
+            reg-names = "main", "edid";
+            interrupt-parent = <&gpio3>;
+            interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+            clocks = <&cec_clock>;
+            clock-names = "cec";
+            adi,dsi-lanes = <4>;
+            avdd-supply = <&v1v8>;
+            dvdd-supply = <&v1v8>;
+            pvdd-supply = <&v1v8>;
+            a2vdd-supply = <&v1v8>;
+            v3p3-supply = <&v3v3>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    adv7533_in: endpoint {
+                        remote-endpoint = <&dsi_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    adv7533_out: endpoint {
+                        remote-endpoint = <&hdmi_connector_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    codec_endpoint: endpoint {
+                        remote-endpoint = <&i2s0_cpu_endpoint>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
new file mode 100644
index 000000000000..4590186c4a0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analogix Semiconductor, Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
+
+maintainers:
+  - Xin Ji <xji@analogixsemi.com>
+
+description: |
+  The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
+  designed for portable devices.
+
+properties:
+  compatible:
+    items:
+      - const: analogix,anx7625
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: used for interrupt pin B8.
+    maxItems: 1
+
+  enable-gpios:
+    description: used for power on chip control, POWER_EN pin D2.
+    maxItems: 1
+
+  reset-gpios:
+    description: used for reset chip control, RESET_N pin B7.
+    maxItems: 1
+
+  vdd10-supply:
+    description: Regulator that provides the supply 1.0V power.
+
+  vdd18-supply:
+    description: Regulator that provides the supply 1.8V power.
+
+  vdd33-supply:
+    description: Regulator that provides the supply 3.3V power.
+
+  analogix,lane0-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane0 PHY.
+      Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and
+      [Swing control] setting.
+      Registers 0~9, bit 3:0 is [Boost control], these bits control
+      post cursor manual, increase the [Boost control] to increase
+      Pre-emphasis value.
+      Registers 0~9, bit 6:4 is [Swing control], these bits control
+      swing manual, increase [Swing control] setting to add Vp-p value
+      for each Swing, Pre.
+      Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [R select control] and
+      [R Termination control] setting.
+      Registers 10~19, bit 4:0 is [R select control], these bits are
+      compensation manual, increase it can enhance IO driven strength
+      and Vp-p.
+      Registers 10~19, bit 5:6 is [R termination control], these bits
+      adjust 50ohm impedance of DP tx termination. 00:55 ohm,
+      01:50 ohm(default), 10:45 ohm, 11:40 ohm.
+
+  analogix,lane1-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane1 PHY.
+      DP TX lane1 swing register setting same with lane0
+      swing, please refer lane0-swing property description.
+
+  analogix,audio-enable:
+    type: boolean
+    description: let the driver enable audio HDMI codec function or not.
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          MIPI DSI/DPI input.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint: true
+
+              bus-type:
+                enum: [7]
+                default: 1
+
+              data-lanes: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for panel or connector.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vdd10-supply
+  - vdd18-supply
+  - vdd33-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        encoder@58 {
+            compatible = "analogix,anx7625";
+            reg = <0x58>;
+            enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+            vdd10-supply = <&pp1000_mipibrdg>;
+            vdd18-supply = <&pp1800_mipibrdg>;
+            vdd33-supply = <&pp3300_mipibrdg>;
+            analogix,audio-enable;
+            analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+            analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                mipi2dp_bridge_in: port@0 {
+                    reg = <0>;
+                    anx7625_in: endpoint {
+                        remote-endpoint = <&mipi_dsi>;
+                        bus-type = <7>;
+                        data-lanes = <0 1 2 3>;
+                    };
+                };
+
+                mipi2dp_bridge_out: port@1 {
+                    reg = <1>;
+                    anx7625_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+            };
+
+            aux-bus {
+                panel {
+                    compatible = "innolux,n125hce-gn1";
+                    power-supply = <&pp3300_disp_x>;
+                    backlight = <&backlight_lcd0>;
+
+                    port {
+                        panel_in: endpoint {
+                            remote-endpoint = <&anx7625_out>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
new file mode 100644
index 000000000000..4a5e5d9d6f90
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
+
+maintainers:
+  - Andrzej Hajda <andrzej.hajda@intel.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Robert Foss <robert.foss@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - analogix,anx7808
+      - analogix,anx7812
+      - analogix,anx7814
+      - analogix,anx7818
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  interrupts:
+    maxItems: 1
+    description: Should contain the INTP interrupt.
+
+  hpd-gpios:
+    deprecated: true
+    maxItems: 1
+    description: Which GPIO to use for hpd.
+
+  pd-gpios:
+    maxItems: 1
+    description: Which GPIO to use for power down.
+
+  reset-gpios:
+    maxItems: 1
+    description: Which GPIO to use for reset.
+
+  dvdd10-supply:
+    description: Regulator for 1.0V digital core power.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for HDMI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for SlimPort, DisplayPort, eDP or MyDP output.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        anx7814: bridge@38 {
+            compatible = "analogix,anx7814";
+            reg = <0x38>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <99 IRQ_TYPE_LEVEL_LOW>;   /* INTP */
+            pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    anx7814_in: endpoint {
+                        remote-endpoint = <&hdmi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    anx7814_out: endpoint {
+                        remote-endpoint = <&edp_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
index c21103869923..1c0406c38fe5 100644
--- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@@ -26,25 +26,23 @@ properties:
     description: GPIO connected to active low reset
 
   dvdd12-supply:
-    maxItems: 1
     description: Regulator for 1.2V digital core power.
 
   dvdd25-supply:
-    maxItems: 1
     description: Regulator for 2.5V digital core power.
 
   ports:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
       port@0:
-        type: object
-        description: |
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
           Video port for LVTTL input
 
       port@1:
-        type: object
-        description: |
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
           Video port for eDP output (panel or connector).
           May be omitted if EDID works reliably.
 
diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
deleted file mode 100644
index 17258747fff6..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Analogix ANX7814 SlimPort (Full-HD Transmitter)
------------------------------------------------
-
-The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
-designed for portable devices.
-
-Required properties:
-
- - compatible		: Must be one of:
-			  "analogix,anx7808"
-			  "analogix,anx7812"
-			  "analogix,anx7814"
-			  "analogix,anx7818"
- - reg			: I2C address of the device
- - interrupts		: Should contain the INTP interrupt
- - hpd-gpios		: Which GPIO to use for hpd
- - pd-gpios		: Which GPIO to use for power down
- - reset-gpios		: Which GPIO to use for reset
-
-Optional properties:
-
- - dvdd10-supply	: Regulator for 1.0V digital core power.
- - Video port for HDMI input, using the DT bindings defined in [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	anx7814: anx7814@38 {
-		compatible = "analogix,anx7814";
-		reg = <0x38>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <99 IRQ_TYPE_LEVEL_LOW>;   /* INTP */
-		hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
-		pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
-		port {
-			anx7814_in: endpoint {
-				remote-endpoint = <&hdmi0_out>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
new file mode 100644
index 000000000000..b2e8bc6da9d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence MHDP8546 bridge
+
+maintainers:
+  - Swapnil Jakhade <sjakhade@cadence.com>
+  - Yuti Amonkar <yamonkar@cadence.com>
+
+properties:
+  compatible:
+    enum:
+      - cdns,mhdp8546
+      - ti,j721e-mhdp8546
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
+          The AUX and PMA registers are not part of this range, they are instead
+          included in the associated PHY.
+      - description:
+          Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
+      - description:
+          Register block of mhdptx sapb registers.
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mhdptx
+      - const: j721e-intg
+      - const: mhdptx-sapb
+
+  clocks:
+    maxItems: 1
+    description:
+      DP bridge clock, used by the IP to know how to translate a number of
+      clock cycles into a time (which is used to comply with DP standard timings
+      and delays).
+
+  phys:
+    maxItems: 1
+    description:
+      phandle to the DisplayPort PHY.
+
+  phy-names:
+    items:
+      - const: dpphy
+
+  power-domains:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          First input port representing the DP bridge input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Second input port representing the DP bridge input.
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Third input port representing the DP bridge input.
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Fourth input port representing the DP bridge input.
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port representing the DP bridge output.
+
+    required:
+      - port@0
+      - port@4
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-mhdp8546
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 3
+        reg-names:
+          minItems: 2
+          maxItems: 3
+    else:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+        reg-names:
+          minItems: 1
+          maxItems: 2
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reg-names
+  - phys
+  - phy-names
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mhdp: dp-bridge@f0fb000000 {
+            compatible = "cdns,mhdp8546";
+            reg = <0xf0 0xfb000000 0x0 0x1000000>;
+            reg-names = "mhdptx";
+            clocks = <&mhdp_clock>;
+            phys = <&dp_phy>;
+            phy-names = "dpphy";
+            interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dp_bridge_input: endpoint {
+                        remote-endpoint = <&xxx_dpi_output>;
+                    };
+                };
+
+                port@4 {
+                    reg = <4>;
+                    dp_bridge_output: endpoint {
+                        remote-endpoint = <&xxx_dp_connector_input>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
new file mode 100644
index 000000000000..5fb54375aeb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+
+description: |
+  ICN6211 is MIPI-DSI to RGB Converter bridge from chipone.
+
+  It has a flexible configuration of MIPI DSI signal input and
+  produce RGB565, RGB666, RGB888 output format.
+
+properties:
+  compatible:
+    enum:
+      - chipone,icn6211
+
+  reg:
+    maxItems: 1
+    description: virtual channel number of a DSI peripheral
+
+  clock-names:
+    const: refclk
+
+  clocks:
+    maxItems: 1
+    description: |
+        Optional external clock connected to REF_CLK input.
+        The clock rate must be in 10..154 MHz range.
+
+  enable-gpios:
+    description: Bridge EN pin, chip is reset when EN is low.
+
+  vdd1-supply:
+    description: A 1.8V/2.5V/3.3V supply that power the MIPI RX.
+
+  vdd2-supply:
+    description: A 1.8V/2.5V/3.3V supply that power the PLL.
+
+  vdd3-supply:
+    description: A 1.8V/2.5V/3.3V supply that power the RGB output.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Video port for MIPI DSI input
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DPI output (panel or connector).
+
+    required:
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@0 {
+        compatible = "chipone,icn6211";
+        reg = <0>;
+        enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            bridge_in_dsi: endpoint {
+              remote-endpoint = <&dsi_out_bridge>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            bridge_out_panel: endpoint {
+              remote-endpoint = <&panel_out_bridge>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
new file mode 100644
index 000000000000..bb6289c7d375
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/chrontel,ch7033.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chrontel CH7033 Video Encoder Device Tree Bindings
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  compatible:
+    const: chrontel,ch7033
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Video port for RGB input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          DVI port, should be connected to a node compatible with the
+          dvi-connector binding.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vga-dvi-encoder@76 {
+            compatible = "chrontel,ch7033";
+            reg = <0x76>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    endpoint {
+                        remote-endpoint = <&lcd0_rgb_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&dvi_in>;
+                    };
+                };
+
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
deleted file mode 100644
index 164cbb15f04c..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Dumb RGB to VGA DAC bridge
----------------------------
-
-This binding is aimed for dumb RGB to VGA DAC based bridges that do not require
-any configuration.
-
-Required properties:
-
-- compatible: Must be "dumb-vga-dac"
-
-Required nodes:
-
-This device has two video ports. Their connections are modelled using the OF
-graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-- Video port 0 for RGB input
-- Video port 1 for VGA output
-
-Optional properties:
-- vdd-supply: Power supply for DAC
-
-Example
--------
-
-bridge {
-	compatible = "dumb-vga-dac";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			vga_bridge_in: endpoint {
-				remote-endpoint = <&tcon0_out_vga>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			vga_bridge_out: endpoint {
-				remote-endpoint = <&vga_con_in>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
deleted file mode 100644
index 33bf981fbe33..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Synopsys DesignWare HDMI TX Encoder
-===================================
-
-This document defines device tree properties for the Synopsys DesignWare HDMI
-TX Encoder (DWC HDMI TX). It doesn't constitue a device tree binding
-specification by itself but is meant to be referenced by platform-specific
-device tree bindings.
-
-When referenced from platform device tree bindings the properties defined in
-this document are defined as follows. The platform device tree bindings are
-responsible for defining whether each property is required or optional.
-
-- reg: Memory mapped base address and length of the DWC HDMI TX registers.
-
-- reg-io-width: Width of the registers specified by the reg property. The
-  value is expressed in bytes and must be equal to 1 or 4 if specified. The
-  register width defaults to 1 if the property is not present.
-
-- interrupts: Reference to the DWC HDMI TX interrupt.
-
-- clocks: References to all the clocks specified in the clock-names property
-  as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt.
-
-- clock-names: The DWC HDMI TX uses the following clocks.
-
-  - "iahb" is the bus clock for either AHB and APB (mandatory).
-  - "isfr" is the internal register configuration clock (mandatory).
-  - "cec" is the HDMI CEC controller main clock (optional).
-
-- ports: The connectivity of the DWC HDMI TX with the rest of the system is
-  expressed in using ports as specified in the device graph bindings defined
-  in Documentation/devicetree/bindings/graph.txt. The numbering of the ports
-  is platform-specific.
diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
deleted file mode 100644
index b13adf30b8d3..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Synopsys DesignWare MIPI DSI host controller
-============================================
-
-This document defines device tree properties for the Synopsys DesignWare MIPI
-DSI host controller. It doesn't constitue a device tree binding specification
-by itself but is meant to be referenced by platform-specific device tree
-bindings.
-
-When referenced from platform device tree bindings the properties defined in
-this document are defined as follows. The platform device tree bindings are
-responsible for defining whether each optional property is used or not.
-
-- reg: Memory mapped base address and length of the DesignWare MIPI DSI
-  host controller registers. (mandatory)
-
-- clocks: References to all the clocks specified in the clock-names property
-  as specified in [1]. (mandatory)
-
-- clock-names:
-  - "pclk" is the peripheral clock for either AHB and APB. (mandatory)
-  - "px_clk" is the pixel clock for the DPI/RGB input. (optional)
-
-- resets: References to all the resets specified in the reset-names property
-  as specified in [2]. (optional)
-
-- reset-names: string reset name, must be "apb" if used. (optional)
-
-- panel or bridge node: see [3]. (mandatory)
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/reset/reset.txt
-[3] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
new file mode 100644
index 000000000000..94543006f5de
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp LVDS Display Bridge
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels.
+
+  The i.MX8qm/qxp LDB is controlled by Control and Status Registers(CSR) module.
+  The CSR module, as a system controller, contains the LDB's configuration
+  registers.
+
+  For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color
+  format and can map the input to VESA or JEIDA standards.  The two channels
+  cannot be used simultaneously, that is to say, the user should pick one of
+  them to use.  Two LDB channels from two LDB instances can work together in
+  LDB split mode to support a dual link LVDS display.  The channel indexes
+  have to be different.  Channel0 outputs odd pixels and channel1 outputs
+  even pixels.
+
+  For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel
+  input color format.  The two channels can be used simultaneously, either
+  in dual mode or split mode.  In dual mode, the two channels output identical
+  data.  In split mode, channel0 outputs odd pixels and channel1 outputs even
+  pixels.
+
+  A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in
+  the SoC reference manuals.  The pixel mapper uses logic of LDBs embedded in
+  i.MX6qdl/sx SoCs, i.e., it is essentially based on them.  To keep the naming
+  consistency, this binding calls it LDB.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-ldb
+      - fsl,imx8qxp-ldb
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: pixel clock
+      - description: bypass clock
+
+  clock-names:
+    items:
+      - const: pixel
+      - const: bypass
+
+  power-domains:
+    maxItems: 1
+
+  fsl,companion-ldb:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to companion LDB which is used in LDB split mode.
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a channel of LDB.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The channel index.
+        enum: [ 0, 1 ]
+
+      phys:
+        description: A phandle to the phy module representing the LVDS PHY.
+        maxItems: 1
+
+      phy-names:
+        const: lvds_phy
+
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port of the channel.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port of the channel.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - reg
+      - phys
+      - phy-names
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - power-domains
+  - channel@0
+  - channel@1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-ldb
+    then:
+      properties:
+        fsl,companion-ldb: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    ldb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx8qxp-ldb";
+        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                 <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+        clock-names = "pixel", "bypass";
+        power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+        channel@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+            phys = <&mipi_lvds_0_phy>;
+            phy-names = "lvds_phy";
+
+            port@0 {
+                reg = <0>;
+
+                mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                };
+            };
+        };
+
+        channel@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+            phys = <&mipi_lvds_0_phy>;
+            phy-names = "lvds_phy";
+
+            port@0 {
+                reg = <0>;
+
+                mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
new file mode 100644
index 000000000000..50bae2122183
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-combiner.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Pixel Combiner
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp Pixel Combiner takes two output streams from a
+  single display controller and manipulates the two streams to support a number
+  of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as
+  either one screen, two screens, or virtual screens.  The pixel combiner is
+  also responsible for generating some of the control signals for the pixel link
+  output channel.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-pixel-combiner
+      - fsl,imx8qxp-pixel-combiner
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: apb
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a display stream of pixel combiner.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The display stream index.
+        enum: [ 0, 1 ]
+
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the display stream.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the display stream.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - reg
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    pixel-combiner@56020000 {
+        compatible = "fsl,imx8qxp-pixel-combiner";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x56020000 0x10000>;
+        clocks = <&dc0_pixel_combiner_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "apb";
+        power-domains = <&pd IMX_SC_R_DC_0>;
+
+        channel@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_combiner_ch0_dc0_dpu_disp0: endpoint {
+                    remote-endpoint = <&dc0_dpu_disp0_dc0_pixel_combiner_ch0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dc0_pixel_combiner_ch0_dc0_pixel_link0: endpoint {
+                    remote-endpoint = <&dc0_pixel_link0_dc0_pixel_combiner_ch0>;
+                };
+            };
+        };
+
+        channel@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_combiner_ch1_dc0_dpu_disp1: endpoint {
+                    remote-endpoint = <&dc0_dpu_disp1_dc0_pixel_combiner_ch1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dc0_pixel_combiner_ch1_dc0_pixel_link1: endpoint {
+                    remote-endpoint = <&dc0_pixel_link1_dc0_pixel_combiner_ch1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
new file mode 100644
index 000000000000..38ecc7926fad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-link.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Display Pixel Link
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard
+  asynchronous linkage between pixel sources(display controller or
+  camera module) and pixel consumers(imaging or displays).
+  It consists of two distinct functions, a pixel transfer function and a
+  control interface.  Multiple pixel channels can exist per one control channel.
+  This binding documentation is only for pixel links whose pixel sources are
+  display controllers.
+
+  The i.MX8qm/qxp Display Pixel Link is accessed via System Controller Unit(SCU)
+  firmware.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-dc-pixel-link
+      - fsl,imx8qxp-dc-pixel-link
+
+  fsl,dc-id:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      u8 value representing the display controller index that the pixel link
+      connects to.
+
+  fsl,dc-stream-id:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      u8 value representing the display controller stream index that the pixel
+      link connects to.
+    enum: [0, 1]
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The pixel link input port node from upstream video source.
+
+    patternProperties:
+      "^port@[1-4]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The pixel link output port node to downstream bridge.
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-dc-pixel-link
+    then:
+      properties:
+        fsl,dc-id:
+          const: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-dc-pixel-link
+    then:
+      properties:
+        fsl,dc-id:
+          enum: [0, 1]
+
+required:
+  - compatible
+  - fsl,dc-id
+  - fsl,dc-stream-id
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    dc0-pixel-link0 {
+        compatible = "fsl,imx8qxp-dc-pixel-link";
+        fsl,dc-id = /bits/ 8 <0>;
+        fsl,dc-stream-id = /bits/ 8 <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* from dc0 pixel combiner channel0 */
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint {
+                    remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>;
+                };
+            };
+
+            /* to PXL2DPIs in MIPI/LVDS combo subsystems */
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>;
+                };
+
+                dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>;
+                };
+            };
+
+            /* unused */
+            port@2 {
+                reg = <2>;
+            };
+
+            /* unused */
+            port@3 {
+                reg = <3>;
+            };
+
+            /* to imaging subsystem */
+            port@4 {
+                reg = <4>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
new file mode 100644
index 000000000000..e4e77fad05f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI)
+  interfaces the pixel link 36-bit data output and the DSI controller’s
+  MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module
+  used in LVDS mode, to remap the pixel color codings between those modules.
+  This module is purely combinatorial.
+
+  The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module.
+  The CSR module, as a system controller, contains the PXL2DPI's configuration
+  register.
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-pxl2dpi
+
+  fsl,sc-resource:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The SCU resource ID associated with this PXL2DPI instance.
+
+  power-domains:
+    maxItems: 1
+
+  fsl,companion-pxl2dpi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to companion PXL2DPI which is used by downstream
+      LVDS Display Bridge(LDB) in split mode.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI input port node from pixel link.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI output port node to downstream bridge.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - fsl,sc-resource
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    pxl2dpi {
+        compatible = "fsl,imx8qxp-pxl2dpi";
+        fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+        power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 {
+                     reg = <1>;
+                     remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
new file mode 100644
index 000000000000..b19be0804abe
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DPI to LVDS bridge chip
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The i.MX8MP mediamix contains two registers which are responsible
+  for configuring the on-SoC DPI-to-LVDS serializer. This describes
+  those registers as bridge within the DT.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-ldb
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ldb
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ldb
+      - const: lvds
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DPI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-A output (panel or bridge).
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-B output (panel or bridge).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    blk-ctrl {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        bridge@5c {
+            compatible = "fsl,imx8mp-ldb";
+            clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+            clock-names = "ldb";
+            reg = <0x5c 0x4>, <0x128 0x4>;
+            reg-names = "ldb", "lvds";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    ldb_from_lcdif2: endpoint {
+                        remote-endpoint = <&lcdif2_to_ldb>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    ldb_lvds_ch0: endpoint {
+                        remote-endpoint = <&ldb_to_lvdsx4panel>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    ldb_lvds_ch1: endpoint {
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
new file mode 100644
index 000000000000..a44d025d33bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/google,cros-ec-anx7688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port
+
+maintainers:
+  - Nicolas Boichat <drinkcat@chromium.org>
+
+description: |
+  ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to
+  DisplayPort 1.3 Ultra-HDi (4096x2160p60). It is an Analogix ANX7688 chip
+  which is connected to and operated by the ChromeOS Embedded Controller
+  (See google,cros-ec.yaml). It is accessed using I2C tunneling through
+  the EC and therefore its node should be a child of an EC I2C tunnel node
+  (See google,cros-ec-i2c-tunnel.yaml).
+
+properties:
+  compatible:
+    const: google,cros-ec-anx7688
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for HDMI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: USB Type-c connector.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c_tunnel_b: i2c-tunnel1 {
+        compatible = "google,cros-ec-i2c-tunnel";
+        google,remote-bus = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        anx7688: anx7688@2c {
+            compatible = "google,cros-ec-anx7688";
+            reg = <0x2c>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    anx7688_in: endpoint {
+                        remote-endpoint = <&hdmi0_out>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    anx7688_out: endpoint {
+                        remote-endpoint = <&typec_connector>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
new file mode 100644
index 000000000000..89490fdffeb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Ingenic JZ4780 HDMI Transmitter
+
+maintainers:
+  - H. Nikolaus Schaller <hns@goldelico.com>
+
+description: |
+  The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4
+  TX controller IP with accompanying PHY IP.
+
+allOf:
+  - $ref: synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    const: ingenic,jz4780-dw-hdmi
+
+  reg-io-width:
+    const: 4
+
+  clocks:
+    maxItems: 2
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input from LCD controller output.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Link to the HDMI connector.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ports
+  - reg-io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    hdmi: hdmi@10180000 {
+        compatible = "ingenic,jz4780-dw-hdmi";
+        reg = <0x10180000 0x8000>;
+        reg-io-width = <4>;
+        interrupt-parent = <&intc>;
+        interrupts = <3>;
+        clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
+        clock-names = "iahb", "isfr";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            hdmi_in: port@0 {
+                reg = <0>;
+                dw_hdmi_in: endpoint {
+                    remote-endpoint = <&jz4780_lcd_out>;
+                };
+            };
+            hdmi_out: port@1 {
+                reg = <1>;
+                dw_hdmi_out: endpoint {
+                    remote-endpoint = <&hdmi_con>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
new file mode 100644
index 000000000000..dcb1336ee2a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/intel,keembay-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Devicetree bindings for Intel Keem Bay mipi dsi controller
+
+maintainers:
+  - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
+  - Edmond J Dea <edmund.j.dea@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-dsi
+
+  reg:
+    items:
+      - description: MIPI registers range
+
+  reg-names:
+    items:
+      - const: mipi
+
+  clocks:
+    items:
+      - description: MIPI DSI clock
+      - description: MIPI DSI econfig clock
+      - description: MIPI DSI config clock
+
+  clock-names:
+    items:
+      - const: clk_mipi
+      - const: clk_mipi_ecfg
+      - const: clk_mipi_cfg
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI DSI input port.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI output port.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    mipi-dsi@20900000 {
+        compatible = "intel,keembay-dsi";
+        reg = <0x20900000 0x4000>;
+        reg-names = "mipi";
+        clocks = <&scmi_clk 0x86>,
+                 <&scmi_clk 0x88>,
+                 <&scmi_clk 0x89>;
+        clock-names = "clk_mipi", "clk_mipi_ecfg",
+                      "clk_mipi_cfg";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi_in: endpoint {
+                    remote-endpoint = <&disp_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi_out: endpoint {
+                    remote-endpoint = <&adv7535_input>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
new file mode 100644
index 000000000000..833d11b2303a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ite,it6505.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE it6505 Device Tree Bindings
+
+maintainers:
+  - Allen Chen <allen.chen@ite.com.tw>
+
+description: |
+  The IT6505 is a high-performance DisplayPort 1.1a transmitter,
+  fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications.
+  The IT6505 supports color depth of up to 36 bits (12 bits/color)
+  and ensures robust transmission of high-quality uncompressed video
+  content, along with uncompressed and compressed digital audio content.
+
+  Aside from the various video output formats supported, the IT6505
+  also encodes and transmits up to 8 channels of I2S digital audio,
+  with sampling rate up to 192kHz and sample size up to 24 bits.
+  In addition, an S/PDIF input port takes in compressed audio of up to
+  192kHz frame rate.
+
+  Each IT6505 chip comes preprogrammed with an unique HDCP key,
+  in compliance with the HDCP 1.3 standard so as to provide secure
+  transmission of high-definition content. Users of the IT6505 need not
+  purchase any HDCP keys or ROMs.
+
+properties:
+  compatible:
+    const: ite,it6505
+
+  reg:
+    maxItems: 1
+
+  ovdd-supply:
+    description: I/O voltage
+
+  pwr18-supply:
+    description: core voltage
+
+  interrupts:
+    maxItems: 1
+    description: interrupt specifier of INT pin
+
+  reset-gpios:
+    maxItems: 1
+    description: gpio specifier of RESET pin
+
+  extcon:
+    maxItems: 1
+    description: extcon specifier for the Power Delivery
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: A port node pointing to DPI host port node
+
+required:
+  - compatible
+  - ovdd-supply
+  - pwr18-supply
+  - interrupts
+  - reset-gpios
+  - extcon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dp-bridge@5c {
+            compatible = "ite,it6505";
+            interrupts = <152 IRQ_TYPE_EDGE_FALLING 152 0>;
+            reg = <0x5c>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&it6505_pins>;
+            ovdd-supply = <&mt6358_vsim1_reg>;
+            pwr18-supply = <&it6505_pp18_reg>;
+            reset-gpios = <&pio 179 1>;
+            extcon = <&usbc_extcon>;
+
+            port {
+                it6505_in: endpoint {
+                    remote-endpoint = <&dpi_out>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
new file mode 100644
index 000000000000..1b2185be92cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE it66121 HDMI bridge Device Tree Bindings
+
+maintainers:
+  - Phong LE <ple@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  The IT66121 is a high-performance and low-power single channel HDMI
+  transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward compatible
+  to DVI 1.0 specifications.
+
+properties:
+  compatible:
+    const: ite,it66121
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active low reset
+
+  vrf12-supply:
+    description: Regulator for 1.2V analog core power.
+
+  vcn33-supply:
+    description: Regulator for 3.3V digital core power.
+
+  vcn18-supply:
+    description: Regulator for 1.8V IO core power.
+
+  interrupts:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DPI input port.
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              bus-width:
+                description:
+                  Endpoint bus width.
+                enum:
+                  - 12  # 12 data lines connected and dual-edge mode
+                  - 24  # 24 data lines connected and single-edge mode
+                default: 24
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI Connector port.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vrf12-supply
+  - vcn33-supply
+  - vcn18-supply
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        it66121hdmitx: hdmitx@4c {
+            compatible = "ite,it66121";
+            pinctrl-names = "default";
+            pinctrl-0 = <&ite_pins_default>;
+            vcn33-supply = <&mt6358_vcn33_wifi_reg>;
+            vcn18-supply = <&mt6358_vcn18_reg>;
+            vrf12-supply = <&mt6358_vrf12_reg>;
+            reset-gpios = <&pio 160 GPIO_ACTIVE_LOW>;
+            interrupt-parent = <&pio>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            reg = <0x4c>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    it66121_in: endpoint {
+                        bus-width = <12>;
+                        remote-endpoint = <&display_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    hdmi_conn_out: endpoint {
+                        remote-endpoint = <&hdmi_conn_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
new file mode 100644
index 000000000000..674891ee2f8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT8912B MIPI to HDMI Bridge
+
+maintainers:
+  - Adrien Grassein <adrien.grassein@gmail.com>
+
+description: |
+  The LT8912B is a bridge device which convert DSI to HDMI
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt8912b
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active high RESET pin.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Primary MIPI port for MIPI input
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes: true
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          HDMI port, should be connected to a node compatible with the
+          hdmi-connector binding.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c4 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdmi-bridge@48 {
+        compatible = "lontium,lt8912b";
+        reg = <0x48>;
+        reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            hdmi_out_in: endpoint {
+              data-lanes = <0 1 2 3>;
+              remote-endpoint = <&mipi_dsi_out>;
+            };
+          };
+
+          port@1 {
+              reg = <1>;
+
+              endpoint {
+                  remote-endpoint = <&hdmi_in>;
+              };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml
new file mode 100644
index 000000000000..9a6e9b25d14a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS
+  or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI.
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt9211
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active high RESET pin.
+
+  vccio-supply:
+    description: Regulator for 1.8V IO power.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI DSI port-1 for MIPI input or
+          LVDS port-1 for LVDS input or DPI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI input or LVDS port-2
+          for LVDS input. Used in combination with primary
+          port-1 to drive higher resolution displays
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI DSI port-1 for MIPI output or
+          LVDS port-1 for LVDS output or DPI output.
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI output or LVDS port-2
+          for LVDS output. Used in combination with primary
+          port-1 to drive higher resolution displays.
+
+    required:
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - vccio-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdmi-bridge@3b {
+        compatible = "lontium,lt9211";
+        reg = <0x3b>;
+
+        reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+        interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+        vccio-supply = <&lt9211_1v8>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+
+            endpoint {
+              remote-endpoint = <&panel_in_lvds>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
new file mode 100644
index 000000000000..5b9d36f7af30
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT9611(UXC) 2 Port MIPI to HDMI Bridge
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  The LT9611 and LT9611UXC are bridge devices which convert DSI to HDMI
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt9611
+      - lontium,lt9611uxc
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active high RESET pin.
+
+  vdd-supply:
+    description: Regulator for 1.8V MIPI phy power.
+
+  vcc-supply:
+    description: Regulator for 3.3V IO power.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI port-1 for MIPI input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI input, used in combination
+          with primary MIPI port-1 to drive higher resolution displays
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          HDMI port for HDMI output
+
+    required:
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd-supply
+  - vcc-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c10 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdmi-bridge@3b {
+        compatible = "lontium,lt9611";
+        reg = <0x3b>;
+
+        reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+        interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+        vdd-supply = <&lt9611_1v8>;
+        vcc-supply = <&lt9611_3v3>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            lt9611_a: endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            lt9611_b: endpoint {
+              remote-endpoint = <&dsi1_out>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+            lt9611_out: endpoint {
+              remote-endpoint = <&hdmi_con>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 8f373029f5d2..84aafcbf0919 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -32,32 +32,47 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - ti,ds90c185       # For the TI DS90C185 FPD-Link Serializer
-          - ti,ds90c187       # For the TI DS90C187 FPD-Link Serializer
-          - ti,sn75lvds83     # For the TI SN75LVDS83 FlatLink transmitter
-        - const: lvds-encoder # Generic LVDS encoder compatible fallback
+          - enum:
+              - ti,ds90c185   # For the TI DS90C185 FPD-Link Serializer
+              - ti,ds90c187   # For the TI DS90C187 FPD-Link Serializer
+              - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
+          - const: lvds-encoder # Generic LVDS encoder compatible fallback
       - items:
-        - enum:
-          - ti,ds90cf384a     # For the DS90CF384A FPD-Link LVDS Receiver
-        - const: lvds-decoder # Generic LVDS decoders compatible fallback
+          - enum:
+              - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver
+              - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+          - const: lvds-decoder # Generic LVDS decoders compatible fallback
       - enum:
-        - thine,thc63lvdm83d  # For the THC63LVDM83D LVDS serializer
+          - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
 
   ports:
-    type: object
-    description: |
-      This device has two video ports. Their connections are modeled using the
-      OF graph bindings specified in Documentation/devicetree/bindings/graph.txt
+    $ref: /schemas/graph.yaml#/properties/ports
+
     properties:
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
           For LVDS encoders, port 0 is the parallel input
           For LVDS decoders, port 0 is the LVDS input
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-mapping:
+                enum:
+                  - jeida-18
+                  - jeida-24
+                  - vesa-24
+                description: |
+                  The color signals mapping order. See details in
+                  Documentation/devicetree/bindings/display/lvds.yaml
+
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           For LVDS encoders, port 1 is the LVDS output
           For LVDS decoders, port 1 is the parallel output
@@ -66,15 +81,55 @@ properties:
       - port@0
       - port@1
 
+  pclk-sample:
+    description:
+      Data sampling on rising or falling edge.
+    enum:
+      - 0  # Falling edge
+      - 1  # Rising edge
+    default: 0
+
   powerdown-gpios:
     description:
       The GPIO used to control the power down line of this device.
     maxItems: 1
 
+  power-supply: true
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-decoder
+    then:
+      properties:
+        ports:
+          properties:
+            port@0:
+              properties:
+                endpoint:
+                  properties:
+                    data-mapping: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-encoder
+    then:
+      properties:
+        pclk-sample: false
+
 required:
   - compatible
   - ports
 
+additionalProperties: false
+
+
 examples:
   - |
     lvds-encoder {
diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
new file mode 100644
index 000000000000..350fb8f400f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Northwest Logic MIPI-DSI controller on i.MX SoCs
+
+maintainers:
+  - Guido Gúnther <agx@sigxcpu.org>
+  - Robert Chiras <robert.chiras@nxp.com>
+
+description: |
+  NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
+  the SOCs NWL MIPI-DSI host controller.
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+properties:
+  compatible:
+    const: fsl,imx8mq-nwl-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+
+  clocks:
+    items:
+      - description: DSI core clock
+      - description: RX_ESC clock (used in escape mode)
+      - description: TX_ESC clock (used in escape mode)
+      - description: PHY_REF clock
+      - description: LCDIF clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: rx_esc
+      - const: tx_esc
+      - const: phy_ref
+      - const: lcdif
+
+  mux-controls:
+    description:
+      mux controller node to use for operating the input mux
+
+  phys:
+    maxItems: 1
+    description:
+      A phandle to the phy module representing the DPHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: dsi byte reset line
+      - description: dsi dpi reset line
+      - description: dsi esc reset line
+      - description: dsi pclk reset line
+
+  reset-names:
+    items:
+      - const: byte
+      - const: dpi
+      - const: esc
+      - const: pclk
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description:
+          Input port node to receive pixel data from the
+          display controller. Exactly one endpoint must be
+          specified.
+        properties:
+          endpoint@0:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: sub-node describing the input from LCDIF
+
+          endpoint@1:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: sub-node describing the input from DCSS
+
+        oneOf:
+          - required:
+              - endpoint@0
+          - required:
+              - endpoint@1
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          DSI output port node to the panel or the next bridge
+          in the chain
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - clock-names
+  - clocks
+  - compatible
+  - interrupts
+  - mux-controls
+  - phy-names
+  - phys
+  - ports
+  - reg
+  - reset-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/imx8mq-reset.h>
+
+    dsi@30a00000 {
+              #address-cells = <1>;
+              #size-cells = <0>;
+              compatible = "fsl,imx8mq-nwl-dsi";
+              reg = <0x30A00000 0x300>;
+              clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
+                       <&clk IMX8MQ_CLK_DSI_AHB>,
+                       <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
+                       <&clk IMX8MQ_CLK_DSI_PHY_REF>,
+                       <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+              clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
+              interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+              mux-controls = <&mux 0>;
+              power-domains = <&pgc_mipi>;
+              resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
+                       <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
+                       <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
+                       <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
+              reset-names = "byte", "dpi", "esc", "pclk";
+              phys = <&dphy>;
+              phy-names = "dphy";
+
+              panel@0 {
+                      compatible = "rocktech,jh057n00900";
+                      reg = <0>;
+                      vcc-supply = <&reg_2v8_p>;
+                      iovcc-supply = <&reg_1v8_p>;
+                      reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+                      port {
+                           panel_in: endpoint {
+                                     remote-endpoint = <&mipi_dsi_out>;
+                           };
+                      };
+              };
+
+              ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                           #size-cells = <0>;
+                           #address-cells = <1>;
+                           reg = <0>;
+                           mipi_dsi_in: endpoint@0 {
+                                        reg = <0>;
+                                        remote-endpoint = <&lcdif_mipi_dsi>;
+                           };
+                    };
+                    port@1 {
+                           reg = <1>;
+                           mipi_dsi_out: endpoint {
+                                         remote-endpoint = <&panel_in>;
+                           };
+                    };
+              };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
new file mode 100644
index 000000000000..107dd138e6c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN3460 eDP to LVDS bridge
+
+maintainers:
+  - Sean Paul <seanpaul@chromium.org>
+
+properties:
+  compatible:
+    const: nxp,ptn3460
+
+  reg:
+    description: I2C address of the bridge
+    maxItems: 1
+
+  edid-emulation:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description:
+      The EDID emulation entry to use
+      Value  Resolution  Description
+        0     1024x768   NXP Generic
+        1     1920x1080  NXP Generic
+        2     1920x1080  NXP Generic
+        3     1600x900   Samsung LTM200KT
+        4     1920x1080  Samsung LTM230HT
+        5     1366x768   NXP Generic
+        6     1600x900   ChiMei M215HGE
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+  powerdown-gpios:
+    description: GPIO connected to the PD_N signal.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the RST_N signal.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for LVDS output
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for eDP input
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - edid-emulation
+  - powerdown-gpios
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@20 {
+        compatible = "nxp,ptn3460";
+        reg = <0x20>;
+        edid-emulation = <5>;
+        powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            bridge_out: endpoint {
+              remote-endpoint = <&panel_in>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            bridge_in: endpoint {
+              remote-endpoint = <&dp_out>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
new file mode 100644
index 000000000000..c4bf54397473
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,tda998x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP TDA998x HDMI transmitter
+
+maintainers:
+  - Russell King <linux@armlinux.org.uk>
+
+properties:
+  compatible:
+    const: nxp,tda998x
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  video-ports:
+    default: 0x230145
+    maximum: 0xffffff
+    description:
+      24 bits value which defines how the video controller output is wired to
+      the TDA998x input.
+
+  audio-ports:
+    description:
+      Array of 8-bit values, 2 values per DAI (Documentation/sound/soc/dai.rst).
+      The implementation allows one or two DAIs.
+      If two DAIs are defined, they must be of different type.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 1
+      items:
+        - description: |
+            The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S
+            (see include/dt-bindings/display/tda998x.h).
+        - description:
+            The second value defines the tda998x AP_ENA reg content when the
+            DAI in question is used.
+
+  '#sound-dai-cells':
+    enum: [ 0, 1 ]
+
+  nxp,calib-gpios:
+    maxItems: 1
+    description:
+      Calibration GPIO, which must correspond with the gpio used for the
+      TDA998x interrupt pin.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Parallel input port
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        type: object
+        description: Parallel input port
+
+      port@1:
+        type: object
+        description: HDMI output port
+
+required:
+  - compatible
+  - reg
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/display/tda998x.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tda998x: hdmi-encoder@70 {
+            compatible = "nxp,tda998x";
+            reg = <0x70>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+            video-ports = <0x230145>;
+
+            #sound-dai-cells = <1>;
+                         /* DAI-format / AP_ENA reg value */
+            audio-ports = <TDA998x_SPDIF 0x04>,
+                          <TDA998x_I2S 0x03>;
+
+            port {
+                tda998x_in: endpoint {
+                    remote-endpoint = <&lcdc_0>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
new file mode 100644
index 000000000000..8ab156e0a8cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ps8640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DSI to eDP Video Format Converter Device Tree Bindings
+
+maintainers:
+  - Nicolas Boichat <drinkcat@chromium.org>
+
+description: |
+  The PS8640 is a low power MIPI-to-eDP video format converter supporting
+  mobile devices with embedded panel resolutions up to 2048 x 1536. The
+  device accepts a single channel of MIPI DSI v1.1, with up to four lanes
+  plus clock, at a transmission rate up to 1.5Gbit/sec per lane. The
+  device outputs eDP v1.4, one or two lanes, at a link rate of up to
+  3.24Gbit/sec per lane.
+
+properties:
+  compatible:
+    const: parade,ps8640
+
+  reg:
+    maxItems: 1
+    description: Base I2C address of the device.
+
+  powerdown-gpios:
+    maxItems: 1
+    description: GPIO connected to active low powerdown.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active low reset.
+
+  vdd12-supply:
+    description: Regulator for 1.2V digital core power.
+
+  vdd33-supply:
+    description: Regulator for 3.3V digital core power.
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for DSI input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for eDP output (panel or connector).
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - powerdown-gpios
+  - reset-gpios
+  - vdd12-supply
+  - vdd33-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ps8640: edp-bridge@18 {
+            compatible = "parade,ps8640";
+            reg = <0x18>;
+            powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>;
+            vdd12-supply = <&ps8640_fixed_1v2>;
+            vdd33-supply = <&mt6397_vgp2_reg>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    ps8640_in: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    ps8640_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+            };
+
+            aux-bus {
+                panel {
+                    compatible = "boe,nv133fhm-n62";
+                    power-supply = <&pp3300_dx_edp>;
+                    backlight = <&backlight>;
+
+                    port {
+                        panel_in: endpoint {
+                            remote-endpoint = <&ps8640_out>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt b/Documentation/devicetree/bindings/display/bridge/ptn3460.txt
deleted file mode 100644
index 361971ba104d..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-ptn3460 bridge bindings
-
-Required properties:
-	- compatible: "nxp,ptn3460"
-	- reg: i2c address of the bridge
-	- powerdown-gpio: OF device-tree gpio specification  for PD_N pin.
-	- reset-gpio: OF device-tree gpio specification for RST_N pin.
-	- edid-emulation: The EDID emulation entry to use
-		+-------+------------+------------------+
-		| Value | Resolution | Description      |
-		|   0   |  1024x768  | NXP Generic      |
-		|   1   |  1920x1080 | NXP Generic      |
-		|   2   |  1920x1080 | NXP Generic      |
-		|   3   |  1600x900  | Samsung LTM200KT |
-		|   4   |  1920x1080 | Samsung LTM230HT |
-		|   5   |  1366x768  | NXP Generic      |
-		|   6   |  1600x900  | ChiMei M215HGE   |
-		+-------+------------+------------------+
-
-	- video interfaces: Device node can contain video interface port
-			    nodes for panel according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	lvds-bridge@20 {
-		compatible = "nxp,ptn3460";
-		reg = <0x20>;
-		powerdown-gpio = <&gpy2 5 1 0 0>;
-		reset-gpio = <&gpx1 5 1 0 0>;
-		edid-emulation = <5>;
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
new file mode 100644
index 000000000000..afeeb967393d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car MIPI DSI/CSI-2 Encoder
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas
+  R-Car V3U SoC. The encoder can operate in either DSI or CSI-2 mode, with up
+  to four data lanes.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a779a0-dsi-csi2-tx    # for V3U
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Functional clock
+      - description: DSI (and CSI-2) functional clock
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: fck
+      - const: dsi
+      - const: pll
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI/CSI-2 output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    dsi0: dsi-encoder@fed80000 {
+        compatible = "renesas,r8a779a0-dsi-csi2-tx";
+        reg = <0xfed80000 0x10000>;
+        power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+        clocks = <&cpg CPG_MOD 415>,
+                 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+                 <&cpg CPG_CORE R8A779A0_CLK_CP>;
+        clock-names = "fck", "dsi", "pll";
+        resets = <&cpg 415>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi0_in: endpoint {
+                    remote-endpoint = <&du_out_dsi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&sn65dsi86_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
deleted file mode 100644
index 819f3e31013c..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-Renesas Gen3 DWC HDMI TX Encoder
-================================
-
-The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
-with a companion PHY IP.
-
-These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
-Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
-following device-specific properties.
-
-
-Required properties:
-
-- compatible : Shall contain one or more of
-  - "renesas,r8a774a1-hdmi" for R8A774A1 (RZ/G2M) compatible HDMI TX
-  - "renesas,r8a774b1-hdmi" for R8A774B1 (RZ/G2N) compatible HDMI TX
-  - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX
-  - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX
-  - "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX
-  - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 and RZ/G2 compatible
-			     HDMI TX
-
-    When compatible with generic versions, nodes must list the SoC-specific
-    version corresponding to the platform first, followed by the
-    family-specific version.
-
-- reg: See dw_hdmi.txt.
-- interrupts: HDMI interrupt number
-- clocks: See dw_hdmi.txt.
-- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
-- ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0
-  corresponding to the video input of the controller and one port numbered 1
-  corresponding to its HDMI output, and one port numbered 2 corresponding to
-  sound input of the controller. Each port shall have a single endpoint.
-
-Optional properties:
-
-- power-domains: Shall reference the power domain that contains the DWC HDMI,
-  if any.
-
-
-Example:
-
-	hdmi0: hdmi@fead0000 {
-		compatible = "renesas,r8a7795-dw-hdmi";
-		reg = <0 0xfead0000 0 0x10000>;
-		interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
-		clock-names = "iahb", "isfr";
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				dw_hdmi0_in: endpoint {
-					remote-endpoint = <&du_out_hdmi0>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				rcar_dw_hdmi0_out: endpoint {
-					remote-endpoint = <&hdmi0_con>;
-				};
-			};
-			port@2 {
-				reg = <2>;
-				rcar_dw_hdmi0_sound_in: endpoint {
-					remote-endpoint = <&hdmi_sound_out>;
-				};
-			};
-		};
-	};
-
-	hdmi0-out {
-		compatible = "hdmi-connector";
-		label = "HDMI0 OUT";
-		type = "a";
-
-		port {
-			hdmi0_con: endpoint {
-				remote-endpoint = <&rcar_dw_hdmi0_out>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
new file mode 100644
index 000000000000..e3ec697f89e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car DWC HDMI TX Encoder
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+  with a companion PHY IP.
+
+allOf:
+  - $ref: synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-hdmi # for RZ/G2M compatible HDMI TX
+          - renesas,r8a774b1-hdmi # for RZ/G2N compatible HDMI TX
+          - renesas,r8a774e1-hdmi # for RZ/G2H compatible HDMI TX
+          - renesas,r8a7795-hdmi # for R-Car H3 compatible HDMI TX
+          - renesas,r8a7796-hdmi # for R-Car M3-W compatible HDMI TX
+          - renesas,r8a77961-hdmi # for R-Car M3-W+ compatible HDMI TX
+          - renesas,r8a77965-hdmi # for R-Car M3-N compatible HDMI TX
+      - const: renesas,rcar-gen3-hdmi
+
+  reg-io-width:
+    const: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI output port
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Sound input port
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - interrupts
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    hdmi@fead0000 {
+        compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+        reg = <0xfead0000 0x10000>;
+        interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
+        clock-names = "iahb", "isfr";
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 729>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                dw_hdmi0_in: endpoint {
+                    remote-endpoint = <&du_out_hdmi0>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                rcar_dw_hdmi0_out: endpoint {
+                    remote-endpoint = <&hdmi0_con>;
+                };
+            };
+            port@2 {
+                reg = <2>;
+                rcar_dw_hdmi0_sound_in: endpoint {
+                    remote-endpoint = <&hdmi_sound_out>;
+                };
+            };
+        };
+    };
+
+    hdmi0-out {
+        compatible = "hdmi-connector";
+        label = "HDMI0 OUT";
+        type = "a";
+
+        port {
+            hdmi0_con: endpoint {
+                remote-endpoint = <&rcar_dw_hdmi0_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
deleted file mode 100644
index c62ce2494ed9..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-Renesas R-Car LVDS Encoder
-==========================
-
-These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
-Gen2, R-Car Gen3 and RZ/G SoCs.
-
-Required properties:
-
-- compatible : Shall contain one of
-  - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders
-  - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders
-  - "renesas,r8a774a1-lvds" for R8A774A1 (RZ/G2M) compatible LVDS encoders
-  - "renesas,r8a774b1-lvds" for R8A774B1 (RZ/G2N) compatible LVDS encoders
-  - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders
-  - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders
-  - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders
-  - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders
-  - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders
-  - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders
-  - "renesas,r8a77965-lvds" for R8A77965 (R-Car M3-N) compatible LVDS encoders
-  - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders
-  - "renesas,r8a77980-lvds" for R8A77980 (R-Car V3H) compatible LVDS encoders
-  - "renesas,r8a77990-lvds" for R8A77990 (R-Car E3) compatible LVDS encoders
-  - "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders
-
-- reg: Base address and length for the memory-mapped registers
-- clocks: A list of phandles + clock-specifier pairs, one for each entry in
-  the clock-names property.
-- clock-names: Name of the clocks. This property is model-dependent.
-  - The functional clock, which mandatory for all models, shall be listed
-    first, and shall be named "fck".
-  - On R8A77990, R8A77995 and R8A774C0, the LVDS encoder can use the EXTAL or
-    DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be
-    named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN
-    numerical index.
-  - When the clocks property only contains the functional clock, the
-    clock-names property may be omitted.
-- resets: A phandle + reset specifier for the module reset
-
-Required nodes:
-
-The LVDS encoder has two video ports. Their connections are modelled using the
-OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-- Video port 0 corresponds to the parallel RGB input
-- Video port 1 corresponds to the LVDS output
-
-Each port shall have a single endpoint.
-
-Optional properties:
-
-- renesas,companion : phandle to the companion LVDS encoder. This property is
-  mandatory for the first LVDS encoder on D3 and E3 SoCs, and shall point to
-  the second encoder to be used as a companion in dual-link mode. It shall not
-  be set for any other LVDS encoder.
-
-
-Example:
-
-	lvds0: lvds@feb90000 {
-		compatible = "renesas,r8a77990-lvds";
-		reg = <0 0xfeb90000 0 0x20>;
-		clocks = <&cpg CPG_MOD 727>;
-		power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
-		resets = <&cpg 727>;
-
-		renesas,companion = <&lvds1>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				lvds0_in: endpoint {
-					remote-endpoint = <&du_out_lvds0>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				lvds0_out: endpoint {
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
new file mode 100644
index 000000000000..bb9dbfb9beaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
@@ -0,0 +1,235 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car LVDS Encoder
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
+  Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a7742-lvds # for RZ/G1H compatible LVDS encoders
+      - renesas,r8a7743-lvds # for RZ/G1M compatible LVDS encoders
+      - renesas,r8a7744-lvds # for RZ/G1N compatible LVDS encoders
+      - renesas,r8a774a1-lvds # for RZ/G2M compatible LVDS encoders
+      - renesas,r8a774b1-lvds # for RZ/G2N compatible LVDS encoders
+      - renesas,r8a774c0-lvds # for RZ/G2E compatible LVDS encoders
+      - renesas,r8a774e1-lvds # for RZ/G2H compatible LVDS encoders
+      - renesas,r8a7790-lvds # for R-Car H2 compatible LVDS encoders
+      - renesas,r8a7791-lvds # for R-Car M2-W compatible LVDS encoders
+      - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders
+      - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders
+      - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders
+      - renesas,r8a77961-lvds # for R-Car M3-W+ compatible LVDS encoders
+      - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders
+      - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders
+      - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders
+      - renesas,r8a77990-lvds # for R-Car E3 compatible LVDS encoders
+      - renesas,r8a77995-lvds # for R-Car D3 compatible LVDS encoders
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: LVDS output port
+
+    required:
+      - port@0
+      - port@1
+
+  power-domains:
+    maxItems: 1
+
+  renesas,companion:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the companion LVDS encoder. This property is mandatory
+      for the first LVDS encoder on R-Car D3 and E3, and RZ/G2E SoCs, and shall
+      point to the second encoder to be used as a companion in dual-link mode.
+      It shall not be set for any other LVDS encoder.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - ports
+
+if:
+  properties:
+    compatible:
+      enum:
+        - renesas,r8a774c0-lvds
+        - renesas,r8a77990-lvds
+        - renesas,r8a77995-lvds
+then:
+  properties:
+    clocks:
+      minItems: 1
+      items:
+        - description: Functional clock
+        - description: EXTAL input clock
+        - description: DU_DOTCLKIN0 input clock
+        - description: DU_DOTCLKIN1 input clock
+
+    clock-names:
+      minItems: 1
+      items:
+        - const: fck
+        # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks.
+        # These clocks are optional.
+        - enum:
+            - extal
+            - dclkin.0
+            - dclkin.1
+        - enum:
+            - extal
+            - dclkin.0
+            - dclkin.1
+        - enum:
+            - extal
+            - dclkin.0
+            - dclkin.1
+
+  required:
+    - clock-names
+
+else:
+  properties:
+    clocks:
+      items:
+        - description: Functional clock
+
+    clock-names:
+      items:
+        - const: fck
+
+    renesas,companion: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    lvds@feb90000 {
+        compatible = "renesas,r8a7795-lvds";
+        reg = <0xfeb90000 0x14>;
+        clocks = <&cpg CPG_MOD 727>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 727>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                lvds_in: endpoint {
+                    remote-endpoint = <&du_out_lvds0>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                lvds_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/power/r8a77990-sysc.h>
+
+    lvds0: lvds@feb90000 {
+        compatible = "renesas,r8a77990-lvds";
+        reg = <0xfeb90000 0x20>;
+        clocks = <&cpg CPG_MOD 727>,
+                 <&x13_clk>,
+                 <&extal_clk>;
+        clock-names = "fck", "dclkin.0", "extal";
+        power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+        resets = <&cpg 727>;
+
+        renesas,companion = <&lvds1>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                lvds0_in: endpoint {
+                    remote-endpoint = <&du_out_lvds0>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                lvds0_out: endpoint {
+                    remote-endpoint = <&panel_in1>;
+                };
+            };
+        };
+    };
+
+    lvds1: lvds@feb90100 {
+        compatible = "renesas,r8a77990-lvds";
+        reg = <0xfeb90100 0x20>;
+        clocks = <&cpg CPG_MOD 727>,
+                 <&x13_clk>,
+                 <&extal_clk>;
+        clock-names = "fck", "dclkin.0", "extal";
+        power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+        resets = <&cpg 726>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                lvds1_in: endpoint {
+                    remote-endpoint = <&du_out_lvds1>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                lvds1_out: endpoint {
+                    remote-endpoint = <&panel_in2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
deleted file mode 100644
index 6e14e087c0d0..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-sii902x HDMI bridge bindings
-
-Required properties:
-	- compatible: "sil,sii9022"
-	- reg: i2c address of the bridge
-
-Optional properties:
-	- interrupts: describe the interrupt line used to inform the host
-	  about hotplug events.
-	- reset-gpios: OF device-tree gpio specification for RST_N pin.
-
-	HDMI audio properties:
-	- #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin
-	   is wired, <1> if the both are wired. HDMI audio is
-	   configured only if this property is found.
-	- sil,i2s-data-lanes: Array of up to 4 integers with values of 0-3
-	   Each integer indicates which i2s pin is connected to which
-	   audio fifo. The first integer selects i2s audio pin for the
-	   first audio fifo#0 (HDMI channels 1&2), second for fifo#1
-	   (HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s
-	   pins (SD0 - SD3). Any i2s pin can be connected to any fifo,
-	   but there can be no gaps. E.g. an i2s pin must be mapped to
-	   fifo#0 and fifo#1 before mapping a channel to fifo#2. Default
-	   value is <0>, describing SD0 pin beiging routed to hdmi audio
-	   fifo #0.
-	- clocks: phandle and clock specifier for each clock listed in
-           the clock-names property
-	- clock-names: "mclk"
-	   Describes SII902x MCLK input. MCLK can be used to produce
-	   HDMI audio CTS values. This property follows
-	   Documentation/devicetree/bindings/clock/clock-bindings.txt
-	   consumer binding.
-
-	If HDMI audio is configured the sii902x device becomes an I2S
-	and/or spdif audio codec component (e.g a digital audio sink),
-	that can be used in configuring a full audio devices with
-	simple-card or audio-graph-card binding. See their binding
-	documents on how to describe the way the sii902x device is
-	connected to the rest of the audio system:
-	Documentation/devicetree/bindings/sound/simple-card.txt
-	Documentation/devicetree/bindings/sound/audio-graph-card.txt
-	Note: In case of the audio-graph-card binding the used port
-	index should be 3.
-
-Optional subnodes:
-	- video input: this subnode can contain a video input port node
-	  to connect the bridge to a display controller output (See this
-	  documentation [1]).
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	hdmi-bridge@39 {
-		compatible = "sil,sii9022";
-		reg = <0x39>;
-		reset-gpios = <&pioA 1 0>;
-
-		#sound-dai-cells = <0>;
-		sil,i2s-data-lanes = < 0 1 2 >;
-		clocks = <&mclk>;
-		clock-names = "mclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				bridge_in: endpoint {
-					remote-endpoint = <&dc_out>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
deleted file mode 100644
index a55bf77bd960..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/sii9234.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Silicon Image SiI9234 HDMI/MHL bridge bindings
-
-Required properties:
-	- compatible : "sil,sii9234".
-	- reg : I2C address for TPI interface, use 0x39
-	- avcc33-supply : MHL/USB Switch Supply Voltage (3.3V)
-	- iovcc18-supply : I/O Supply Voltage (1.8V)
-	- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
-	- cvcc12-supply : Digital Core Supply Voltage (1.2V)
-	- interrupts: interrupt specifier of INT pin
-	- reset-gpios: gpio specifier of RESET pin (active low)
-	- video interfaces: Device node can contain two video interface port
-			    nodes for HDMI encoder and connector according to [1].
-			    - port@0 - MHL to HDMI
-			    - port@1 - MHL to connector
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-
-Example:
-	sii9234@39 {
-		compatible = "sil,sii9234";
-		reg = <0x39>;
-		avcc33-supply = <&vcc33mhl>;
-		iovcc18-supply = <&vcc18mhl>;
-		avcc12-supply = <&vsil12>;
-		cvcc12-supply = <&vsil12>;
-		reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpf3>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				mhl_to_hdmi: endpoint {
-					remote-endpoint = <&hdmi_to_mhl>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				mhl_to_connector: endpoint {
-					remote-endpoint = <&connector_to_mhl>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
new file mode 100644
index 000000000000..5a69547ad3d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii9022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image sii902x HDMI bridge
+
+maintainers:
+  - Boris Brezillon <bbrezillon@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sil,sii9022-cpi # CEC Programming Interface
+              - sil,sii9022-tpi # Transmitter Programming Interface
+          - const: sil,sii9022
+      - const: sil,sii9022
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt line used to inform the host about hotplug events.
+
+  reset-gpios:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O Supply Voltage (1.8V or 3.3V)
+
+  cvcc12-supply:
+    description: Digital Core Supply Voltage (1.2V)
+
+  '#sound-dai-cells':
+    enum: [ 0, 1 ]
+    description: |
+      <0> if only I2S or S/PDIF pin is wired,
+      <1> if both are wired.
+      HDMI audio is configured only if this property is found.
+      If HDMI audio is configured, the sii902x device becomes an I2S and/or
+      S/PDIF audio codec component (e.g. a digital audio sink), that can be
+      used in configuring full audio devices with simple-card or
+      audio-graph-card bindings. See their binding documents on how to describe
+      the way the
+      sii902x device is connected to the rest of the audio system:
+      Documentation/devicetree/bindings/sound/simple-card.yaml
+      Documentation/devicetree/bindings/sound/audio-graph-card.yaml
+      Note: In case of the audio-graph-card binding the used port index should
+      be 3.
+
+  sil,i2s-data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    uniqueItems: true
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    description:
+      Each integer indicates which I2S pin is connected to which audio FIFO.
+      The first integer selects the I2S audio pin for the first audio FIFO#0
+      (HDMI channels 1&2), the second for FIFO#1 (HDMI channels 3&4), and so
+      on. There are 4 FIFOs and 4 I2S pins (SD0 - SD3). Any I2S pin can be
+      connected to any FIFO, but there can be no gaps. E.g. an I2S pin must be
+      mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2. The
+      default value is <0>, describing SD0 pin being routed to HDMI audio
+      FIFO#0.
+
+  clocks:
+    maxItems: 1
+    description: MCLK input. MCLK can be used to produce HDMI audio CTS values.
+
+  clock-names:
+    const: mclk
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI output port
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Sound input port
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi-bridge@39 {
+            compatible = "sil,sii9022";
+            reg = <0x39>;
+            reset-gpios = <&pioA 1 0>;
+            iovcc-supply = <&v3v3_hdmi>;
+            cvcc12-supply = <&v1v2_hdmi>;
+
+            #sound-dai-cells = <0>;
+            sil,i2s-data-lanes = < 0 1 2 >;
+            clocks = <&mclk>;
+            clock-names = "mclk";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    bridge_in: endpoint {
+                        remote-endpoint = <&dc_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml
new file mode 100644
index 000000000000..f88ddfe4818b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii9234.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image SiI9234 HDMI/MHL bridge
+
+maintainers:
+  - Maciej Purski <m.purski@samsung.com>
+
+properties:
+  compatible:
+    const: sil,sii9234
+
+  reg:
+    description: I2C address for TPI interface
+    maxItems: 1
+
+  avcc12-supply:
+    description: TMDS Analog Supply Voltage, 1.2V
+
+  avcc33-supply:
+    description: MHL/USB Switch Supply Voltage, 3.3V
+
+  cvcc12-supply:
+    description: Digital Core Supply Voltage, 1.2V
+
+  iovcc18-supply:
+    description: I/O voltage supply, 1.8V
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the reset pin.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for HDMI (encoder) input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          MHL to connector port
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - avcc12-supply
+  - avcc33-supply
+  - cvcc12-supply
+  - iovcc18-supply
+  - interrupts
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@39 {
+        compatible = "sil,sii9234";
+        reg = <0x39>;
+        avcc12-supply = <&vsil12>;
+        avcc33-supply = <&vcc33mhl>;
+        cvcc12-supply = <&vsil12>;
+        iovcc18-supply = <&vcc18mhl>;
+        interrupt-parent = <&gpf3>;
+        interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+        reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            mhl_to_hdmi: endpoint {
+              remote-endpoint = <&hdmi_to_mhl>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            mhl_to_connector: endpoint {
+              remote-endpoint = <&connector_to_mhl>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
new file mode 100644
index 000000000000..43cf4df9811a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/simple-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Transparent non-programmable DRM bridges
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  This binding supports transparent non-programmable bridges that don't require
+  any configuration, with a single input and a single output.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,ths8134a
+              - ti,ths8134b
+          - const: ti,ths8134
+      - items:
+          - const: corpro,gm7123
+          - const: adi,adv7123
+      - enum:
+          - adi,adv7123
+          - dumb-vga-dac
+          - ti,opa362
+          - ti,ths8134
+          - ti,ths8135
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The bridge input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The bridge output
+
+    required:
+      - port@0
+      - port@1
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO controlling bridge enable
+
+  vdd-supply:
+    description: Power supply for the bridge
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    bridge {
+        compatible = "ti,ths8134a", "ti,ths8134";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                vga_bridge_in: endpoint {
+                    remote-endpoint = <&tcon0_out_vga>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                vga_bridge_out: endpoint {
+                    remote-endpoint = <&vga_con_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
new file mode 100644
index 000000000000..11fd68a70dca
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare MIPI DSI host controller
+
+maintainers:
+  - Philippe CORNU <philippe.cornu@foss.st.com>
+
+description: |
+  This document defines device tree properties for the Synopsys DesignWare MIPI
+  DSI host controller. It doesn't constitue a device tree binding specification
+  by itself but is meant to be referenced by platform-specific device tree
+  bindings.
+
+  When referenced from platform device tree bindings the properties defined in
+  this document are defined as follows. The platform device tree bindings are
+  responsible for defining whether each property is required or optional.
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+properties:
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Module clock
+      - description: DSI bus clock for either AHB and APB
+      - description: Pixel clock for the DPI/RGB input
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: ref
+      - const: pclk
+      - const: px_clk
+    minItems: 2
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: apb
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI output node to panel.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - clock-names
+  - clocks
+  - ports
+  - reg
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
new file mode 100644
index 000000000000..4b7e54a8f037
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/synopsys,dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Synopsys DesignWare HDMI TX Controller
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This document defines device tree properties for the Synopsys DesignWare HDMI
+  TX controller (DWC HDMI TX) IP core. It doesn't constitute a full device tree
+  binding specification by itself but is meant to be referenced by device tree
+  bindings for the platform-specific integrations of the DWC HDMI TX.
+
+  When referenced from platform device tree bindings the properties defined in
+  this document are defined as follows. The platform device tree bindings are
+  responsible for defining whether each property is required or optional.
+
+properties:
+  reg:
+    maxItems: 1
+
+  reg-io-width:
+    description:
+      Width (in bytes) of the registers specified by the reg property.
+    enum: [1, 4]
+    default: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+    items:
+      - description: The bus clock for either AHB and APB
+      - description: The internal register configuration clock
+    additionalItems: true
+
+  clock-names:
+    minItems: 2
+    maxItems: 5
+    items:
+      - const: iahb
+      - const: isfr
+    additionalItems: true
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
deleted file mode 100644
index f5a02f61dd36..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Device-Tree bindings for the NXP TDA998x HDMI transmitter
-
-Required properties;
-  - compatible: must be "nxp,tda998x"
-
-  - reg: I2C address
-
-Required node:
-  - port: Input port node with endpoint definition, as described
-        in Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - interrupts: interrupt number and trigger type
-	default: polling
-
-  - pinctrl-0: pin control group to be used for
-	screen plug/unplug interrupt.
-
-  - pinctrl-names: must contain a "default" entry.
-
-  - video-ports: 24 bits value which defines how the video controller
-	output is wired to the TDA998x input - default: <0x230145>
-
-  - audio-ports: array of 8-bit values, 2 values per one DAI[1].
-	The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S[2].
-	The second value defines the tda998x AP_ENA reg content when the DAI
-	in question is used. The implementation allows one or two DAIs. If two
-	DAIs are defined, they must be of different type.
-
-  - nxp,calib-gpios: calibration GPIO, which must correspond with the
-	gpio used for the TDA998x interrupt pin.
-
-[1] Documentation/sound/soc/dai.rst
-[2] include/dt-bindings/display/tda998x.h
-
-Example:
-
-#include <dt-bindings/display/tda998x.h>
-
-	tda998x: hdmi-encoder {
-		compatible = "nxp,tda998x";
-		reg = <0x70>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 2>;		/* falling edge */
-		pinctrl-0 = <&pmx_camera>;
-		pinctrl-names = "default";
-		video-ports = <0x230145>;
-
-		#sound-dai-cells = <2>;
-			     /*	DAI-format	AP_ENA reg value */
-		audio-ports = <	TDA998x_SPDIF	0x04
-				TDA998x_I2S	0x03>;
-
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
deleted file mode 100644
index d17d1e5820d7..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Thine Electronics THC63LVD1024 LVDS decoder
--------------------------------------------
-
-The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS streams
-to parallel data outputs. The chip supports single/dual input/output modes,
-handling up to two LVDS input streams and up to two digital CMOS/TTL outputs.
-
-Single or dual operation mode, output data mapping and DDR output modes are
-configured through input signals and the chip does not expose any control bus.
-
-Required properties:
-- compatible: Shall be "thine,thc63lvd1024"
-- vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input,
-  PPL and digital circuitry
-
-Optional properties:
-- powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low
-- oe-gpios: Output enable GPIO signal, pin name "OE". Active high
-
-The THC63LVD1024 video port connections are modeled according
-to OF graph bindings specified by Documentation/devicetree/bindings/graph.txt
-
-Required video port nodes:
-- port@0: First LVDS input port
-- port@2: First digital CMOS/TTL parallel output
-
-Optional video port nodes:
-- port@1: Second LVDS input port
-- port@3: Second digital CMOS/TTL parallel output
-
-The device can operate in single-link mode or dual-link mode. In single-link
-mode, all pixels are received on port@0, and port@1 shall not contain any
-endpoint. In dual-link mode, even-numbered pixels are received on port@0 and
-odd-numbered pixels on port@1, and both port@0 and port@1 shall contain
-endpoints.
-
-Example:
---------
-
-	thc63lvd1024: lvds-decoder {
-		compatible = "thine,thc63lvd1024";
-
-		vcc-supply = <&reg_lvds_vcc>;
-		powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_dec_in_0: endpoint {
-					remote-endpoint = <&lvds_out>;
-				};
-			};
-
-			port@2{
-				reg = <2>;
-
-				lvds_dec_out_2: endpoint {
-					remote-endpoint = <&adv7511_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
new file mode 100644
index 000000000000..8ae382429d2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/thine,thc63lvd1024.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thine Electronics THC63LVD1024 LVDS Decoder
+
+maintainers:
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS
+  streams to parallel data outputs. The chip supports single/dual input/output
+  modes, handling up to two LVDS input streams and up to two digital CMOS/TTL
+  outputs.
+
+  Single or dual operation mode, output data mapping and DDR output modes are
+  configured through input signals and the chip does not expose any control
+  bus.
+
+properties:
+  compatible:
+    const: thine,thc63lvd1024
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      The device can operate in single or dual input and output modes.
+
+      When operating in single input mode, all pixels are received on port@0,
+      and port@1 shall not contain any endpoint. In dual input mode,
+      even-numbered pixels are received on port@0 and odd-numbered pixels on
+      port@1, and both port@0 and port@1 shall contain endpoints.
+
+      When operating in single output mode all pixels are output from the first
+      CMOS/TTL port and port@3 shall not contain any endpoint. In dual output
+      mode pixels are output from both CMOS/TTL ports and both port@2 and
+      port@3 shall contain endpoints.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: First LVDS input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Second LVDS input port
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: First digital CMOS/TTL parallel output
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Second digital CMOS/TTL parallel output
+
+    required:
+      - port@0
+      - port@2
+
+  oe-gpios:
+    maxItems: 1
+    description: Output enable GPIO signal, pin name "OE", active high.
+
+  powerdown-gpios:
+    maxItems: 1
+    description: Power down GPIO signal, pin name "/PDWN", active low.
+
+  vcc-supply:
+    description:
+      Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and
+      digital circuitry.
+
+required:
+  - compatible
+  - ports
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    lvds-decoder {
+        compatible = "thine,thc63lvd1024";
+
+        vcc-supply = <&reg_lvds_vcc>;
+        powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                lvds_dec_in_0: endpoint {
+                    remote-endpoint = <&lvds_out>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+
+                lvds_dec_out_2: endpoint {
+                    remote-endpoint = <&adv7511_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
new file mode 100644
index 000000000000..542193d77cdf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,dlpc3433.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DLPC3433 MIPI DSI to DMD bridge
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+  - Christopher Vollo <chris@renewoutreach.org>
+
+description: |
+  TI DLPC3433 is a MIPI DSI based display controller bridge
+  for processing high resolution DMD based projectors.
+
+  It has a flexible configuration of MIPI DSI and DPI signal
+  input that produces a DMD output in RGB565, RGB666, RGB888
+  formats.
+
+  It supports upto 720p resolution with 60 and 120 Hz refresh
+  rates.
+
+properties:
+  compatible:
+    const: ti,dlpc3433
+
+  reg:
+    enum:
+      - 0x1b
+      - 0x1d
+
+  enable-gpios:
+    description: PROJ_ON pin, chip powers up PROJ_ON is high.
+
+  vcc_intf-supply:
+    description: A 1.8V/3.3V supply that power the Host I/O.
+
+  vcc_flsh-supply:
+    description: A 1.8V/3.3V supply that power the Flash I/O.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for MIPI DSI input.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DMD output.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@1b {
+            compatible = "ti,dlpc3433";
+            reg = <0x1b>;
+            enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    bridge_in_dsi: endpoint {
+                        remote-endpoint = <&dsi_out_bridge>;
+                        data-lanes = <1 2 3 4>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_out_panel: endpoint {
+                        remote-endpoint = <&panel_out_bridge>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
new file mode 100644
index 000000000000..48a97bb3e2e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SN65DSI83 and SN65DSI84 DSI to LVDS bridge chip
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  Texas Instruments SN65DSI83 1x Single-link MIPI DSI
+  to 1x Single-link LVDS
+  https://www.ti.com/lit/gpn/sn65dsi83
+  Texas Instruments SN65DSI84 1x Single-link MIPI DSI
+  to 1x Dual-link or 2x Single-link LVDS
+  https://www.ti.com/lit/gpn/sn65dsi84
+
+properties:
+  compatible:
+    enum:
+      - ti,sn65dsi83
+      - ti,sn65dsi84
+
+  reg:
+    enum:
+      - 0x2c
+      - 0x2d
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier for bridge_en pin (active high).
+
+  vcc-supply:
+    description: A 1.8V power supply (see regulator/regulator.yaml).
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for MIPI DSI Channel-A input
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for MIPI DSI Channel-B input
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-A output (panel or bridge).
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-B output (panel or bridge).
+
+    required:
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,sn65dsi83
+    then:
+      properties:
+        ports:
+          properties:
+            port@1: false
+            port@3: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,sn65dsi84
+    then:
+      properties:
+        ports:
+          properties:
+            port@1: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@2d {
+            compatible = "ti,sn65dsi83";
+            reg = <0x2d>;
+
+            enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+            vcc-supply = <&reg_sn65dsi83_1v8>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                        data-lanes = <1 2 3 4>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    endpoint {
+                        remote-endpoint = <&panel_in_lvds>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
deleted file mode 100644
index 8ec4a7f2623a..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-SN65DSI86 DSI to eDP bridge chip
---------------------------------
-
-This is the binding for Texas Instruments SN65DSI86 bridge.
-http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
-
-Required properties:
-- compatible: Must be "ti,sn65dsi86"
-- reg: i2c address of the chip, 0x2d as per datasheet
-- enable-gpios: gpio specification for bridge_en pin (active high)
-
-- vccio-supply: A 1.8V supply that powers up the digital IOs.
-- vpll-supply: A 1.8V supply that powers up the displayport PLL.
-- vcca-supply: A 1.2V supply that powers up the analog circuits.
-- vcc-supply: A 1.2V supply that powers up the digital core.
-
-Optional properties:
-- interrupts-extended: Specifier for the SN65DSI86 interrupt line.
-
-- gpio-controller: Marks the device has a GPIO controller.
-- #gpio-cells    : Should be two. The first cell is the pin number and
-                   the second cell is used to specify flags.
-                   See ../../gpio/gpio.txt for more information.
-- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of
-               the cell formats.
-
-- clock-names: should be "refclk"
-- clocks: Specification for input reference clock. The reference
-	  clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
-
-- data-lanes: See ../../media/video-interface.txt
-- lane-polarities: See ../../media/video-interface.txt
-
-- suspend-gpios: specification for GPIO1 pin on bridge (active low)
-
-Required nodes:
-This device has two video ports. Their connections are modelled using the
-OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-- Video port 0 for DSI input
-- Video port 1 for eDP output
-
-Example
--------
-
-edp-bridge@2d {
-	compatible = "ti,sn65dsi86";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x2d>;
-
-	enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
-	suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
-
-	interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
-
-	vccio-supply = <&pm8916_l17>;
-	vcca-supply = <&pm8916_l6>;
-	vpll-supply = <&pm8916_l17>;
-	vcc-supply = <&pm8916_l6>;
-
-	clock-names = "refclk";
-	clocks = <&input_refclk>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			edp_bridge_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			edp_bridge_out: endpoint {
-				data-lanes = <2 1 3 0>;
-				lane-polarities = <0 1 0 1>;
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
-}
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
new file mode 100644
index 000000000000..911564468c5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SN65DSI86 DSI to eDP bridge chip
+
+maintainers:
+  - Sandeep Panda <spanda@codeaurora.org>
+
+description: |
+  The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
+  https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
+
+properties:
+  compatible:
+    const: ti,sn65dsi86
+
+  reg:
+    enum: [ 0x2c, 0x2d ]
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier for bridge_en pin (active high).
+
+  suspend-gpios:
+    maxItems: 1
+    description: GPIO specifier for GPIO1 pin on bridge (active low).
+
+  no-hpd:
+    type: boolean
+    description:
+      Set if the HPD line on the bridge isn't hooked up to anything or is
+      otherwise unusable.
+
+  vccio-supply:
+    description: A 1.8V supply that powers the digital IOs.
+
+  vpll-supply:
+    description: A 1.8V supply that powers the DisplayPort PLL.
+
+  vcca-supply:
+    description: A 1.2V supply that powers the analog circuits.
+
+  vcc-supply:
+    description: A 1.2V supply that powers the digital core.
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Clock specifier for input reference clock. The reference clock rate must
+      be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
+
+  clock-names:
+    const: refclk
+
+  gpio-controller: true
+  '#gpio-cells':
+    const: 2
+    description:
+      First cell is pin number, second cell is flags.  GPIO pin numbers are
+      1-based to match the datasheet.  See ../../gpio/gpio.txt for more
+      information.
+
+  '#pwm-cells':
+    const: 1
+    description: See ../../pwm/pwm.yaml for description of the cell formats.
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DSI input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Video port for eDP output (panel or connector).
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                oneOf:
+                  - minItems: 1
+                    maxItems: 1
+                    uniqueItems: true
+                    items:
+                      enum:
+                        - 0
+                        - 1
+                    description:
+                      If you have 1 logical lane the bridge supports routing
+                      to either port 0 or port 1.  Port 0 is suggested.
+                      See ../../media/video-interface.txt for details.
+
+                  - minItems: 2
+                    maxItems: 2
+                    uniqueItems: true
+                    items:
+                      enum:
+                        - 0
+                        - 1
+                    description:
+                      If you have 2 logical lanes the bridge supports
+                      reordering but only on physical ports 0 and 1.
+                      See ../../media/video-interface.txt for details.
+
+                  - minItems: 4
+                    maxItems: 4
+                    uniqueItems: true
+                    items:
+                      enum:
+                        - 0
+                        - 1
+                        - 2
+                        - 3
+                    description:
+                      If you have 4 logical lanes the bridge supports
+                      reordering in any way.
+                      See ../../media/video-interface.txt for details.
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum:
+                    - 0
+                    - 1
+                description: See ../../media/video-interface.txt
+
+            dependencies:
+              lane-polarities: [data-lanes]
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vccio-supply
+  - vpll-supply
+  - vcca-supply
+  - vcc-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+        vpll-supply = <&src_pp1800_s4a>;
+        vccio-supply = <&src_pp1800_s4a>;
+        vcca-supply = <&src_pp1200_l2a>;
+        vcc-supply = <&src_pp1200_l2a>;
+
+        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+        clock-names = "refclk";
+
+        no-hpd;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            sn65dsi86_out: endpoint {
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+
+        aux-bus {
+          panel {
+            compatible = "boe,nv133fhm-n62";
+            power-supply = <&pp3300_dx_edp>;
+            backlight = <&backlight>;
+            hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+            port {
+              panel_in_edp: endpoint {
+                remote-endpoint = <&sn65dsi86_out>;
+              };
+            };
+          };
+        };
+      };
+    };
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
+        suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
+
+        interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
+
+        vccio-supply = <&pm8916_l17>;
+        vcca-supply = <&pm8916_l6>;
+        vpll-supply = <&pm8916_l17>;
+        vcc-supply = <&pm8916_l6>;
+
+        clock-names = "refclk";
+        clocks = <&input_refclk>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            edp_bridge_in: endpoint {
+              remote-endpoint = <&dsi_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            edp_bridge_out: endpoint {
+              data-lanes = <2 1 3 0>;
+              lane-polarities = <0 1 0 1>;
+              remote-endpoint = <&edp_panel_in>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
deleted file mode 100644
index 5ff4f64ef8e8..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-TFP410 DPI to DVI encoder
-=========================
-
-Required properties:
-- compatible: "ti,tfp410"
-
-Optional properties:
-- powerdown-gpios: power-down gpio
-- reg: I2C address. If and only if present the device node should be placed
-  into the I2C controller node where the TFP410 I2C is connected to.
-- ti,deskew: data de-skew in 350ps increments, from -4 to +3, as configured
-  through th DK[3:1] pins. This property shall be present only if the TFP410
-  is not connected through I2C.
-
-Required nodes:
-
-This device has two video ports. Their connections are modeled using the OF
-graph bindings specified in [1]. Each port node shall have a single endpoint.
-
-- Port 0 is the DPI input port. Its endpoint subnode shall contain a
-  pclk-sample and bus-width property and a remote-endpoint property as specified
-  in [1].
-  - If pclk-sample is not defined, pclk-sample = 0 should be assumed for
-    backward compatibility.
-  - If bus-width is not defined then bus-width = 24 should be assumed for
-    backward compatibility.
-    bus-width = 24: 24 data lines are connected and single-edge mode
-    bus-width = 12: 12 data lines are connected and dual-edge mode
-
-- Port 1 is the DVI output port. Its endpoint subnode shall contain a
-  remote-endpoint property is specified in [1].
-
-[1] Documentation/devicetree/bindings/media/video-interfaces.txt
-
-
-Example
--------
-
-tfp410: encoder@0 {
-	compatible = "ti,tfp410";
-	powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
-	ti,deskew = <4>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			tfp410_in: endpoint@0 {
-				pclk-sample = <1>;
-				bus-width = <24>;
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			tfp410_out: endpoint@0 {
-				remote-endpoint = <&dvi_connector_in>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml
new file mode 100644
index 000000000000..4c5dd8ec2951
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,tfp410.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TFP410 DPI to DVI encoder
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+  - Jyri Sarha <jsarha@ti.com>
+
+properties:
+  compatible:
+    const: ti,tfp410
+
+  reg:
+    description: I2C address of the device.
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+
+  ti,deskew:
+    description:
+      Data de-skew value in 350ps increments, from 0 to 7, as configured
+      through the DK[3:1] pins. The de-skew multiplier is computed as
+      (DK[3:1] - 4), so it ranges from -4 to 3.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DPI input port.
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              pclk-sample:
+                description:
+                  Endpoint sampling edge.
+                enum:
+                  - 0  # Falling edge
+                  - 1  # Rising edge
+                default: 0
+
+              bus-width:
+                description:
+                  Endpoint bus width.
+                enum:
+                  - 12  # 12 data lines connected and dual-edge mode
+                  - 24  # 24 data lines connected and single-edge mode
+                default: 24
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DVI output port.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - ports
+
+if:
+  required:
+    - reg
+then:
+  properties:
+    ti,deskew: false
+else:
+  required:
+    - ti,deskew
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    tfp410: encoder {
+        compatible = "ti,tfp410";
+        powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+        ti,deskew = <3>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                tfp410_in: endpoint {
+                    pclk-sample = <1>;
+                    bus-width = <24>;
+                    remote-endpoint = <&dpi_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                tfp410_out: endpoint {
+                    remote-endpoint = <&dvi_connector_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths813x.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths813x.txt
deleted file mode 100644
index df3d7c1ac09e..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/ti,ths813x.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-THS8134 and THS8135 Video DAC
------------------------------
-
-This is the binding for Texas Instruments THS8134, THS8134A, THS8134B and
-THS8135 Video DAC bridges.
-
-Required properties:
-
-- compatible: Must be one of
-  "ti,ths8134"
-  "ti,ths8134a," "ti,ths8134"
-  "ti,ths8134b", "ti,ths8134"
-  "ti,ths8135"
-
-Required nodes:
-
-This device has two video ports. Their connections are modelled using the OF
-graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-- Video port 0 for RGB input
-- Video port 1 for VGA output
-
-Example
--------
-
-vga-bridge {
-	compatible = "ti,ths8135";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			vga_bridge_in: endpoint {
-				remote-endpoint = <&lcdc_out_vga>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			vga_bridge_out: endpoint {
-				remote-endpoint = <&vga_con_in>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
new file mode 100644
index 000000000000..a412a1da950f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The TC358762 is bridge device which converts MIPI DSI to MIPI DPI.
+
+properties:
+  compatible:
+    enum:
+      - toshiba,tc358762
+
+  reg:
+    maxItems: 1
+    description: virtual channel number of a DSI peripheral
+
+  vddc-supply:
+    description: Regulator for 1.2V internal core power.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DSI input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DPI output (panel or connector).
+
+    required:
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vddc-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@0 {
+        reg = <0>;
+        compatible = "toshiba,tc358762";
+        vddc-supply = <&vcc_1v2_reg>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            bridge_in: endpoint {
+              remote-endpoint = <&dsi_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            bridge_out: endpoint {
+              remote-endpoint = <&panel_in>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
deleted file mode 100644
index 583c5e9dbe6b..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Toshiba TC358767 eDP bridge bindings
-
-Required properties:
- - compatible: "toshiba,tc358767"
- - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
- - clock-names: should be "ref"
- - clocks: OF device-tree clock specification for refclk input. The reference
-   clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
-
-Optional properties:
- - shutdown-gpios: OF device-tree gpio specification for SD pin
-                   (active high shutdown input)
- - reset-gpios: OF device-tree gpio specification for RSTX pin
-                (active low system reset)
- - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
- - ports: the ports node can contain video interface port nodes to connect
-   to a DPI/DSI source and to an eDP/DP sink according to [1][2]:
-    - port@0: DSI input port
-    - port@1: DPI input port
-    - port@2: eDP/DP output port
-
-[1]: Documentation/devicetree/bindings/graph.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	edp-bridge@68 {
-		compatible = "toshiba,tc358767";
-		reg = <0x68>;
-		shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		clock-names = "ref";
-		clocks = <&edp_refclk>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				bridge_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
new file mode 100644
index 000000000000..ed280053ec62
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358767 eDP bridge bindings
+
+maintainers:
+  - Andrey Gusakov <andrey.gusakov@cogentembedded.com>
+
+description: The TC358767 is bridge device which converts DSI/DPI to eDP/DP
+
+properties:
+  compatible:
+    const: toshiba,tc358767
+
+  reg:
+    enum:
+      - 0x68
+      - 0x0f
+    description: |
+        i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
+
+  clock-names:
+    const: "ref"
+
+  clocks:
+    maxItems: 1
+    description: |
+        OF device-tree clock specification for refclk input. The reference.
+        clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
+
+  shutdown-gpios:
+    maxItems: 1
+    description: |
+        OF device-tree gpio specification for SD pin(active high shutdown input)
+
+  reset-gpios:
+    maxItems: 1
+    description: |
+        OF device-tree gpio specification for RSTX pin(active low system reset)
+
+  toshiba,hpd-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0
+      - 1
+    description: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+            DSI input port. The remote endpoint phandle should be a
+            reference to a valid DSI output endpoint node
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+            DPI input/output port. The remote endpoint phandle should be a
+            reference to a valid DPI output or input endpoint node.
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+            eDP/DP output port. The remote endpoint phandle should be a
+            reference to a valid eDP panel input endpoint node. This port is
+            optional, treated as DP panel if not defined
+
+    oneOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* DPI input and eDP output */
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp-bridge@68 {
+            compatible = "toshiba,tc358767";
+            reg = <0x68>;
+            shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+            clock-names = "ref";
+            clocks = <&edp_refclk>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in_0: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    bridge_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+            };
+        };
+    };
+  - |
+    /* DPI input and DP output */
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp-bridge@68 {
+            compatible = "toshiba,tc358767";
+            reg = <0x68>;
+            shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+            clock-names = "ref";
+            clocks = <&edp_refclk>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in_1: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
new file mode 100644
index 000000000000..0b6f5bef120f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358768.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toschiba TC358768/TC358778 Parallel RGB to MIPI DSI bridge
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@ti.com>
+
+description: |
+  The TC358768/TC358778 is bridge device which converts RGB to DSI.
+
+properties:
+  compatible:
+    enum:
+      - toshiba,tc358768
+      - toshiba,tc358778
+
+  reg:
+    maxItems: 1
+    description: base I2C address of the device
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active low RESX pin
+
+  vddc-supply:
+    description: Regulator for 1.2V internal core power.
+
+  vddmipi-supply:
+    description: Regulator for 1.2V for the MIPI.
+
+  vddio-supply:
+    description: Regulator for 1.8V - 3.3V IO power.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: refclk
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+          Video port for RGB input
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              data-lines:
+                $ref: /schemas/types.yaml#/definitions/uint32
+                enum: [ 16, 18, 24 ]
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Video port for DSI output (panel or connector).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vddc-supply
+  - vddmipi-supply
+  - vddio-supply
+  - ports
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dsi_bridge: dsi@e {
+        compatible = "toshiba,tc358768";
+        reg = <0xe>;
+
+        clocks = <&tc358768_refclk>;
+        clock-names = "refclk";
+
+        reset-gpios = <&pcf_display_board 0 GPIO_ACTIVE_LOW>;
+
+        vddc-supply = <&v1_2d>;
+        vddmipi-supply = <&v1_2d>;
+        vddio-supply = <&v3_3d>;
+
+        dsi_bridge_ports: ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            rgb_in: endpoint {
+              remote-endpoint = <&dpi_out>;
+              data-lines = <24>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            dsi_out: endpoint {
+              remote-endpoint = <&lcd_in>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
new file mode 100644
index 000000000000..10471c6c1ff9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358775 DSI to LVDS bridge bindings
+
+maintainers:
+  - Vinay Simha BN <simhavcs@gmail.com>
+
+description: |
+  This binding supports DSI to LVDS bridge TC358775
+
+  MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
+  Video frame size:
+  Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel
+  limited by 135 MHz LVDS speed
+  Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display
+  panel, limited by 270 MHz LVDS speed.
+
+properties:
+  compatible:
+    const: toshiba,tc358775
+
+  reg:
+    maxItems: 1
+    description: i2c address of the bridge, 0x0f
+
+  vdd-supply:
+    description: 1.2V LVDS Power Supply
+
+  vddio-supply:
+    description: 1.8V IO Power Supply
+
+  stby-gpios:
+    maxItems: 1
+    description: Standby pin, Low active
+
+  reset-gpios:
+    maxItems: 1
+    description: Hardware reset, Low active
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          DSI Input. The remote endpoint phandle should be a
+          reference to a valid mipi_dsi_host device node.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Video port for LVDS output (panel or connector).
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Video port for Dual link LVDS output (panel or connector).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+  - stby-gpios
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* For single-link LVDS display panel */
+
+    i2c@78b8000 {
+        /* On High speed expansion */
+        label = "HS-I2C2";
+        reg = <0x078b8000 0x500>;
+        clock-frequency = <400000>; /* fastmode operation */
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tc_bridge: bridge@f {
+            compatible = "toshiba,tc358775";
+            reg = <0x0f>;
+
+            vdd-supply = <&pm8916_l2>;
+            vddio-supply = <&pm8916_l6>;
+
+            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    d2l_in_test: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    lvds_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+            };
+        };
+    };
+
+    dsi@1a98000 {
+        reg = <0x1a98000 0x25c>;
+        reg-names = "dsi_ctrl";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    remote-endpoint = <&d2l_in_test>;
+                    data-lanes = <0 1 2 3>;
+                };
+             };
+         };
+     };
+
+  - |
+    /* For dual-link LVDS display panel */
+
+    i2c@78b8000 {
+        /* On High speed expansion */
+        label = "HS-I2C2";
+        reg = <0x078b8000 0x500>;
+        clock-frequency = <400000>; /* fastmode operation */
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tc_bridge_dual: bridge@f {
+            compatible = "toshiba,tc358775";
+            reg = <0x0f>;
+
+            vdd-supply = <&pm8916_l2>;
+            vddio-supply = <&pm8916_l6>;
+
+            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    d2l_in_dual: endpoint {
+                        remote-endpoint = <&dsi0_out_dual>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    lvds0_out: endpoint {
+                        remote-endpoint = <&panel_in0>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    lvds1_out: endpoint {
+                        remote-endpoint = <&panel_in1>;
+                    };
+                };
+            };
+        };
+    };
+
+    dsi@1a98000 {
+        reg = <0x1a98000 0x25c>;
+        reg-names = "dsi_ctrl";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@1 {
+                reg = <1>;
+                dsi0_out_dual: endpoint {
+                    remote-endpoint = <&d2l_in_dual>;
+                    data-lanes = <0 1 2 3>;
+                };
+             };
+         };
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
deleted file mode 100644
index 0c0970c210ab..000000000000
--- a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Analog TV Connector
-===================
-
-Required properties:
-- compatible: "composite-video-connector" or "svideo-connector"
-
-Optional properties:
-- label: a symbolic name for the connector
-
-Required nodes:
-- Video port for TV input
-
-Example
--------
-
-tv: connector {
-	compatible = "composite-video-connector";
-	label = "tv";
-
-	port {
-		tv_connector_in: endpoint {
-			remote-endpoint = <&venc_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml
new file mode 100644
index 000000000000..a31ca2d52b86
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/analog-tv-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog TV Connector
+
+maintainers:
+  - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+
+properties:
+  compatible:
+    enum:
+      - composite-video-connector
+      - svideo-connector
+
+  label: true
+
+  sdtv-standards:
+    description:
+      Limit the supported TV standards on a connector to the given ones. If
+      not specified all TV standards are allowed. Possible TV standards are
+      defined in include/dt-bindings/display/sdtv-standards.h.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Connection to controller providing analog TV signals
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/display/sdtv-standards.h>
+
+    connector {
+        compatible = "composite-video-connector";
+        label = "tv";
+        sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>;
+
+        port {
+            tv_connector_in: endpoint {
+                remote-endpoint = <&venc_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/connector/dp-connector.yaml b/Documentation/devicetree/bindings/display/connector/dp-connector.yaml
new file mode 100644
index 000000000000..22792a79e7ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/connector/dp-connector.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/dp-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DisplayPort Connector
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+properties:
+  compatible:
+    const: dp-connector
+
+  label: true
+
+  type:
+    enum:
+      - full-size
+      - mini
+
+  hpd-gpios:
+    description: A GPIO line connected to HPD
+    maxItems: 1
+
+  dp-pwr-supply:
+    description: Power supply for the DP_PWR pin
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Connection to controller providing DP signals
+
+required:
+  - compatible
+  - type
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    connector {
+        compatible = "dp-connector";
+        label = "dp0";
+        type = "full-size";
+
+        port {
+            dp_connector_in: endpoint {
+                remote-endpoint = <&dp_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt b/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
deleted file mode 100644
index 207e42e9eba0..000000000000
--- a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-DVI Connector
-==============
-
-Required properties:
-- compatible: "dvi-connector"
-
-Optional properties:
-- label: a symbolic name for the connector
-- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC
-- analog: the connector has DVI analog pins
-- digital: the connector has DVI digital pins
-- dual-link: the connector has pins for DVI dual-link
-- hpd-gpios: HPD GPIO number
-
-Required nodes:
-- Video port for DVI input
-
-Note: One (or both) of 'analog' or 'digital' must be set.
-
-Example
--------
-
-dvi0: connector@0 {
-	compatible = "dvi-connector";
-	label = "dvi";
-
-	digital;
-
-	ddc-i2c-bus = <&i2c3>;
-
-	port {
-		dvi_connector_in: endpoint {
-			remote-endpoint = <&tfp410_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml
new file mode 100644
index 000000000000..93eb14294e68
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/dvi-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DVI Connector
+
+maintainers:
+  - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+
+properties:
+  compatible:
+    const: dvi-connector
+
+  label: true
+
+  hpd-gpios:
+    description: A GPIO line connected to HPD
+    maxItems: 1
+
+  ddc-i2c-bus:
+    description: phandle link to the I2C controller used for DDC EDID probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  analog:
+    type: boolean
+    description: the connector has DVI analog pins
+
+  digital:
+    type: boolean
+    description: the connector has DVI digital pins
+
+  dual-link:
+    type: boolean
+    description: the connector has pins for DVI dual-link
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Connection to controller providing DVI signals
+
+required:
+  - compatible
+  - port
+
+anyOf:
+  - required:
+      - analog
+  - required:
+      - digital
+
+additionalProperties: false
+
+examples:
+  - |
+    connector {
+        compatible = "dvi-connector";
+        label = "dvi";
+
+        digital;
+
+        ddc-i2c-bus = <&i2c3>;
+
+        port {
+            dvi_connector_in: endpoint {
+                remote-endpoint = <&tfp410_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
deleted file mode 100644
index aeb07c4bd703..000000000000
--- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-HDMI Connector
-==============
-
-Required properties:
-- compatible: "hdmi-connector"
-- type: the HDMI connector type: "a", "b", "c", "d" or "e"
-
-Optional properties:
-- label: a symbolic name for the connector
-- hpd-gpios: HPD GPIO number
-- ddc-i2c-bus: phandle link to the I2C controller used for DDC EDID probing
-- ddc-en-gpios: signal to enable DDC bus
-
-Required nodes:
-- Video port for HDMI input
-
-Example
--------
-
-hdmi0: connector@1 {
-	compatible = "hdmi-connector";
-	label = "hdmi";
-
-	type = "a";
-
-	port {
-		hdmi_connector_in: endpoint {
-			remote-endpoint = <&tpd12s015_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
new file mode 100644
index 000000000000..83c0d008265b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/hdmi-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI Connector
+
+maintainers:
+  - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+
+properties:
+  compatible:
+    const: hdmi-connector
+
+  type:
+    description: The HDMI connector type
+    enum:
+      - a   # Standard full size
+      - b   # Never deployed?
+      - c   # Mini
+      - d   # Micro
+      - e   # automotive
+
+  label: true
+
+  hpd-gpios:
+    description: A GPIO line connected to HPD
+    maxItems: 1
+
+  ddc-i2c-bus:
+    description: phandle link to the I2C controller used for DDC EDID probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ddc-en-gpios:
+    description: GPIO signal to enable DDC bus
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Connection to controller providing HDMI signals
+
+required:
+  - compatible
+  - port
+  - type
+
+additionalProperties: false
+
+examples:
+  - |
+    connector {
+        compatible = "hdmi-connector";
+        label = "hdmi";
+
+        type = "a";
+
+        port {
+            hdmi_connector_in: endpoint {
+                remote-endpoint = <&tpd12s015_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/connector/vga-connector.txt b/Documentation/devicetree/bindings/display/connector/vga-connector.txt
deleted file mode 100644
index c727f298e7ad..000000000000
--- a/Documentation/devicetree/bindings/display/connector/vga-connector.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-VGA Connector
-=============
-
-Required properties:
-
-- compatible: "vga-connector"
-
-Optional properties:
-
-- label: a symbolic name for the connector corresponding to a hardware label
-- ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC
-
-Required nodes:
-
-The VGA connector internal connections are modeled using the OF graph bindings
-specified in Documentation/devicetree/bindings/graph.txt.
-
-The VGA connector has a single port that must be connected to a video source
-port.
-
-
-Example
--------
-
-vga0: connector@0 {
-	compatible = "vga-connector";
-	label = "vga";
-
-	ddc-i2c-bus = <&i2c3>;
-
-	port {
-		vga_connector_in: endpoint {
-			remote-endpoint = <&adv7123_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/connector/vga-connector.yaml b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml
new file mode 100644
index 000000000000..25f868002000
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/vga-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VGA Connector
+
+maintainers:
+  - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+
+properties:
+  compatible:
+    const: vga-connector
+
+  label: true
+
+  ddc-i2c-bus:
+    description: phandle link to the I2C controller used for DDC EDID probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Connection to controller providing VGA signals
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    connector {
+        compatible = "vga-connector";
+        label = "vga";
+
+        ddc-i2c-bus = <&i2c3>;
+
+        port {
+            vga_connector_in: endpoint {
+                remote-endpoint = <&adv7123_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
new file mode 100644
index 000000000000..5e4afe9f98fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/dp-aux-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DisplayPort AUX bus
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description:
+  DisplayPort controllers provide a control channel to the sinks that
+  are hooked up to them. This is the DP AUX bus. Over the DP AUX bus
+  we can query properties about a sink and also configure it. In
+  particular, DP sinks support DDC over DP AUX which allows tunneling
+  a standard I2C DDC connection over the AUX channel.
+
+  To model this relationship, DP sinks should be placed as children
+  of the DP controller under the "aux-bus" node.
+
+  At the moment, this binding only handles the eDP case. It is
+  possible it will be extended in the future to handle the DP case.
+  For DP, presumably a connector would be listed under the DP AUX
+  bus instead of a panel.
+
+properties:
+  $nodename:
+    const: "aux-bus"
+
+  panel:
+    $ref: panel/panel-common.yaml#
+
+additionalProperties: false
+
+required:
+  - panel
diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml
index fd986c36c737..ca21671f6bdd 100644
--- a/Documentation/devicetree/bindings/display/dsi-controller.yaml
+++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml
@@ -28,7 +28,7 @@ description: |
 
 properties:
   $nodename:
-    pattern: "^dsi-controller(@.*)?$"
+    pattern: "^dsi(@.*)?$"
 
   "#address-cells":
     const: 1
@@ -55,11 +55,11 @@ patternProperties:
       clock-master:
         type: boolean
         description:
-           Should be enabled if the host is being used in conjunction with
-           another DSI host to drive the same peripheral. Hardware supporting
-           such a configuration generally requires the data on both the busses
-           to be driven by the same clock. Only the DSI host instance
-           controlling this clock should contain this property.
+          Should be enabled if the host is being used in conjunction with
+          another DSI host to drive the same peripheral. Hardware supporting
+          such a configuration generally requires the data on both the busses
+          to be driven by the same clock. Only the DSI host instance
+          controlling this clock should contain this property.
 
       enforce-video-mode:
         type: boolean
@@ -73,10 +73,12 @@ patternProperties:
     required:
       - reg
 
+additionalProperties: true
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    dsi-controller@a0351000 {
+    dsi@a0351000 {
         reg = <0xa0351000 0x1000>;
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
deleted file mode 100644
index 8def11b16a24..000000000000
--- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Vivante GPU core devices
-========================
-
-Required properties:
-- compatible: Should be "vivante,gc"
-  A more specific compatible is not needed, as the cores contain chip
-  identification registers at fixed locations, which provide all the
-  necessary information to the driver.
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain the cores interrupt line
-- clocks: should contain one clock for entry in clock-names
-  see Documentation/devicetree/bindings/clock/clock-bindings.txt
-- clock-names:
-   - "bus":    AXI/master interface clock
-   - "reg":    AHB/slave interface clock
-               (only required if GPU can gate slave interface independently)
-   - "core":   GPU core clock
-   - "shader": Shader clock (only required if GPU has feature PIPE_3D)
-
-Optional properties:
-- power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
-
-example:
-
-gpu_3d: gpu@130000 {
-	compatible = "vivante,gc";
-	reg = <0x00130000 0x4000>;
-	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
-	         <&clks IMX6QDL_CLK_GPU3D_CORE>,
-	         <&clks IMX6QDL_CLK_GPU3D_SHADER>;
-	clock-names = "bus", "core", "shader";
-	power-domains = <&gpc 1>;
-};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt b/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt
deleted file mode 100644
index 0fba2ee6440a..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC)
-
-MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is
-not capable to transfer high resoltuion frame data as decon can send. MIC
-solves this problem by compressing the frame data by 1/2 before it is
-transferred through mipi dsi. The compressed frame data must be uncompressed in
-the panel PCB.
-
-Required properties:
-- compatible: value should be "samsung,exynos5433-mic".
-- reg: physical base address and length of the MIC registers set and system
-       register of mic.
-- clocks: must include clock specifiers corresponding to entries in the
-	  clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0".
-- samsung,disp-syscon: the reference node for syscon for DISP block.
-- ports: contains a port which is connected to decon node and dsi node.
-	 address-cells and size-cells must 1 and 0, respectively.
-- port: contains an endpoint node which is connected to the endpoint in the
-	decon node or dsi node. The reg value must be 0 and 1 respectively.
-
-Example:
-SoC specific DT entry:
-mic: mic@13930000 {
-	compatible = "samsung,exynos5433-mic";
-	reg = <0x13930000 0x48>;
-	clocks = <&cmu_disp CLK_PCLK_MIC0>,
-	       <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
-	clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
-	samsung,disp-syscon = <&syscon_disp>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			mic_to_decon: endpoint {
-				remote-endpoint = <&decon_to_mic>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			mic_to_dsi: endpoint {
-				remote-endpoint = <&dsi_to_mic>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
deleted file mode 100644
index 775193e1c641..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Device-Tree bindings for Samsung Exynos SoC display controller (DECON)
-
-DECON (Display and Enhancement Controller) is the Display Controller for the
-Exynos series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of:
-	"samsung,exynos5433-decon", "samsung,exynos5433-decon-tv";
-- reg: physical base address and length of the DECON registers set.
-- interrupt-names: should contain the interrupt names depending on mode of work:
-		video mode: "vsync",
-		command mode: "lcd_sys",
-		command mode with software trigger: "lcd_sys", "te".
-- interrupts or interrupts-extended: list of interrupt specifiers corresponding
-		to names privided in interrupt-names, as described in
-		interrupt-controller/interrupts.txt
-- clocks: must include clock specifiers corresponding to entries in the
-	  clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x",
-	       "aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x",
-	       "aclk_xiu_decon1x", "pclk_smmu_decon1x", clk_decon_vclk",
-	       "sclk_decon_eclk"
-- ports: contains a port which is connected to mic node. address-cells and
-	 size-cells must 1 and 0, respectively.
-- port: contains an endpoint node which is connected to the endpoint in the mic
-	node. The reg value muset be 0.
-
-Example:
-SoC specific DT entry:
-decon: decon@13800000 {
-	compatible = "samsung,exynos5433-decon";
-	reg = <0x13800000 0x2104>;
-	clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
-		<&cmu_disp CLK_ACLK_XIU_DECON0X>,
-		<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
-		<&cmu_disp CLK_ACLK_SMMU_DECON1X>,
-		<&cmu_disp CLK_ACLK_XIU_DECON1X>,
-		<&cmu_disp CLK_PCLK_SMMU_DECON1X>,
-		<&cmu_disp CLK_SCLK_DECON_VCLK>,
-		<&cmu_disp CLK_SCLK_DECON_ECLK>;
-	clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
-		"pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x",
-		"pclk_smmu_decon1x", "sclk_decon_vclk", "sclk_decon_eclk";
-	interrupt-names = "vsync", "lcd_sys";
-	interrupts = <0 202 0>, <0 203 0>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			decon_to_mic: endpoint {
-				remote-endpoint = <&mic_to_decon>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
deleted file mode 100644
index 53912c99ec38..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
-
-DECON (Display and Enhancement Controller) is the Display Controller for the
-Exynos7 series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be "samsung,exynos7-decon";
-
-- reg: physical base address and length of the DECON registers set.
-
-- interrupts: should contain a list of all DECON IP block interrupts in the
-		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
-		 format depends on the interrupt controller used.
-
-- interrupt-names: should contain the interrupt names: "fifo", "vsync",
-	"lcd_sys", in the same order as they were listed in the interrupts
-        property.
-
-- pinctrl-0: pin control group to be used for this controller.
-
-- pinctrl-names: must contain a "default" entry.
-
-- clocks: must include clock specifiers corresponding to entries in the
-         clock-names property.
-
-- clock-names: list of clock names sorted in the same order as the clocks
-               property. Must contain "pclk_decon0", "aclk_decon0",
-	       "decon0_eclk", "decon0_vclk".
-- i80-if-timings: timing configuration for lcd i80 interface support.
-
-Optional Properties:
-- power-domains: a phandle to DECON power domain node.
-- display-timings: timing settings for DECON, as described in document [1].
-		Can be used in case timings cannot be provided otherwise
-		or to override timings provided by the panel.
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-
-Example:
-
-SoC specific DT entry:
-
-	decon@13930000 {
-		compatible = "samsung,exynos7-decon";
-		interrupt-parent = <&combiner>;
-		reg = <0x13930000 0x1000>;
-		interrupt-names = "lcd_sys", "vsync", "fifo";
-		interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
-		clocks = <&clock_disp PCLK_DECON_INT>,
-			 <&clock_disp ACLK_DECON_INT>,
-			 <&clock_disp SCLK_DECON_INT_ECLK>,
-			 <&clock_disp SCLK_DECON_INT_EXTCLKPLL>;
-		clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
-				"decon0_vclk";
-		status = "disabled";
-	};
-
-Board specific DT entry:
-
-	decon@13930000 {
-		pinctrl-0 = <&lcd_clk &pwm1_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
deleted file mode 100644
index 58b12e25bbb1..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Device-Tree bindings for drm hdmi driver
-
-Required properties:
-- compatible: value should be one among the following:
-	1) "samsung,exynos4210-hdmi"
-	2) "samsung,exynos4212-hdmi"
-	3) "samsung,exynos5420-hdmi"
-	4) "samsung,exynos5433-hdmi"
-- reg: physical base address of the hdmi and length of memory mapped
-	region.
-- interrupts: interrupt number to the cpu.
-- hpd-gpios: following information about the hotplug gpio pin.
-	a) phandle of the gpio controller node.
-	b) pin number within the gpio controller.
-	c) optional flags and pull up/down.
-- ddc: phandle to the hdmi ddc node
-- phy: phandle to the hdmi phy node
-- samsung,syscon-phandle: phandle for system controller node for PMU.
-- #sound-dai-cells: should be 0.
-
-Required properties for Exynos 4210, 4212, 5420 and 5433:
-- clocks: list of clock IDs from SoC clock driver.
-	a) hdmi: Gate of HDMI IP bus clock.
-	b) sclk_hdmi: Gate of HDMI special clock.
-	c) sclk_pixel: Pixel special clock, one of the two possible inputs of
-		HDMI clock mux.
-	d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
-		HDMI clock mux.
-	e) mout_hdmi: It is required by the driver to switch between the 2
-		parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
-		after configuration, parent is set to sclk_hdmiphy else
-		sclk_pixel.
-- clock-names: aliases as per driver requirements for above clock IDs:
-	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
-
-Required properties for Exynos 5433:
-- clocks: list of clock specifiers according to common clock bindings.
-	a) hdmi_pclk: Gate of HDMI IP APB bus.
-	b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus.
-	d) i_tmds_clk: Gate of HDMI TMDS clock.
-	e) i_pixel_clk: Gate of HDMI pixel clock.
-	f) i_spdif_clk: Gate of HDMI SPDIF clock.
-	g) oscclk: Oscillator clock, used as parent of following *_user clocks
-		in case HDMI-PHY is not operational.
-	h) tmds_clko: TMDS clock generated by HDMI-PHY.
-	i) tmds_clko_user: MUX used to switch between oscclk and tmds_clko,
-		respectively if HDMI-PHY is off and operational.
-	j) pixel_clko: Pixel clock generated by HDMI-PHY.
-	k) pixel_clko_user: MUX used to switch between oscclk and pixel_clko,
-		respectively if HDMI-PHY is off and operational.
-- clock-names: aliases for above clock specfiers.
-- samsung,sysreg: handle to syscon used to control the system registers.
-
-Example:
-
-	hdmi {
-		compatible = "samsung,exynos4212-hdmi";
-		reg = <0x14530000 0x100000>;
-		interrupts = <0 95 0>;
-		hpd-gpios = <&gpx3 7 1>;
-		ddc = <&hdmi_ddc_node>;
-		phy = <&hdmi_phy_node>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt
deleted file mode 100644
index 41eee971562b..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Device-Tree bindings for hdmiddc driver
-
-Required properties:
-- compatible: value should be one of the following
-	1) "samsung,exynos5-hdmiddc" <DEPRECATED>
-	2) "samsung,exynos4210-hdmiddc"
-
-- reg: I2C address of the hdmiddc device.
-
-Example:
-
-	hdmiddc {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt
deleted file mode 100644
index 162f641f7639..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Device-Tree bindings for hdmiphy driver
-
-Required properties:
-- compatible: value should be one of the following:
-	1) "samsung,exynos5-hdmiphy" <DEPRECATED>
-	2) "samsung,exynos4210-hdmiphy".
-	3) "samsung,exynos4212-hdmiphy".
-- reg: I2C address of the hdmiphy device.
-
-Example:
-
-	hdmiphy {
-		compatible = "samsung,exynos4210-hdmiphy";
-		reg = <0x38>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt b/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt
deleted file mode 100644
index 3e38128f866b..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Device-Tree bindings for mixer driver
-
-Required properties:
-- compatible: value should be one of the following:
-	1) "samsung,exynos5-mixer" <DEPRECATED>
-	2) "samsung,exynos4210-mixer"
-	3) "samsung,exynos4212-mixer"
-	4) "samsung,exynos5250-mixer"
-	5) "samsung,exynos5420-mixer"
-
-- reg: physical base address of the mixer and length of memory mapped
-	region.
-- interrupts: interrupt number to the cpu.
-- clocks: list of clock IDs from SoC clock driver.
-	a) mixer: Gate of Mixer IP bus clock.
-	b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
-               mixer mux.
-	c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
-
-Example:
-
-	mixer {
-		compatible = "samsung,exynos5250-mixer";
-		reg = <0x14450000 0x10000>;
-		interrupts = <0 94 0>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
deleted file mode 100644
index b3096421d42b..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-Device-Tree bindings for Samsung SoC display controller (FIMD)
-
-FIMD (Fully Interactive Mobile Display) is the Display Controller for the
-Samsung series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of the following
-		"samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
-		"samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
-		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
-		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
-		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
-		"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
-		"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
-
-- reg: physical base address and length of the FIMD registers set.
-
-- interrupts: should contain a list of all FIMD IP block interrupts in the
-		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
-		 format depends on the interrupt controller used.
-
-- interrupt-names: should contain the interrupt names: "fifo", "vsync",
-	"lcd_sys", in the same order as they were listed in the interrupts
-        property.
-
-- pinctrl-0: pin control group to be used for this controller.
-
-- pinctrl-names: must contain a "default" entry.
-
-- clocks: must include clock specifiers corresponding to entries in the
-         clock-names property.
-
-- clock-names: list of clock names sorted in the same order as the clocks
-               property. Must contain "sclk_fimd" and "fimd".
-
-Optional Properties:
-- power-domains: a phandle to FIMD power domain node.
-- samsung,invert-vden: video enable signal is inverted
-- samsung,invert-vclk: video clock signal is inverted
-- display-timings: timing settings for FIMD, as described in document [1].
-		Can be used in case timings cannot be provided otherwise
-		or to override timings provided by the panel.
-- samsung,sysreg: handle to syscon used to control the system registers
-- i80-if-timings: timing configuration for lcd i80 interface support.
-  - cs-setup: clock cycles for the active period of address signal is enabled
-              until chip select is enabled.
-              If not specified, the default value(0) will be used.
-  - wr-setup: clock cycles for the active period of CS signal is enabled until
-              write signal is enabled.
-              If not specified, the default value(0) will be used.
-  - wr-active: clock cycles for the active period of CS is enabled.
-               If not specified, the default value(1) will be used.
-  - wr-hold: clock cycles for the active period of CS is disabled until write
-             signal is disabled.
-             If not specified, the default value(0) will be used.
-
-  The parameters are defined as:
-
-    VCLK(internal)  __|??????|_____|??????|_____|??????|_____|??????|_____|??
-                      :            :            :            :            :
-    Address Output  --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
-                      | cs-setup+1 |            :            :            :
-                      |<---------->|            :            :            :
-    Chip Select     ???????????????|____________:____________:____________|??
-                                   | wr-setup+1 |            | wr-hold+1  |
-                                   |<---------->|            |<---------->|
-    Write Enable    ????????????????????????????|____________|???????????????
-                                                | wr-active+1|
-                                                |<---------->|
-    Video Data      ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
-
-The device node can contain 'port' child nodes according to the bindings defined
-in [2]. The following are properties specific to those nodes:
-- reg: (required) port index, can be:
-		0 - for CAMIF0 input,
-		1 - for CAMIF1 input,
-		2 - for CAMIF2 input,
-		3 - for parallel output,
-		4 - for write-back interface
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-SoC specific DT entry:
-
-	fimd@11c00000 {
-		compatible = "samsung,exynos4210-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x11c00000 0x20000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <11 0>, <11 1>, <11 2>;
-		clocks = <&clock 140>, <&clock 283>;
-		clock-names = "sclk_fimd", "fimd";
-		power-domains = <&pd_lcd0>;
-		status = "disabled";
-	};
-
-Board specific DT entry:
-
-	fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt
deleted file mode 100644
index 82e3bc0b7485..000000000000
--- a/Documentation/devicetree/bindings/display/faraday,tve200.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Faraday TV Encoder TVE200
-
-Required properties:
-
-- compatible: must be one of:
-	"faraday,tve200"
-	"cortina,gemini-tvc", "faraday,tve200"
-
-- reg: base address and size of the control registers block
-
-- interrupts: contains an interrupt specifier for the interrupt
-	line from the TVE200
-
-- clock-names: should contain "PCLK" for the clock line clocking the
-	silicon and "TVE" for the 27MHz clock to the video driver
-
-- clocks: contains phandle and clock specifier pairs for the entries
-	in the clock-names property. See
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional properties:
-
-- resets: contains the reset line phandle for the block
-
-Required sub-nodes:
-
-- port: describes LCD panel signals, following the common binding
-	for video transmitter interfaces; see
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-	This port should have the properties:
-	reg = <0>;
-	It should have one endpoint connected to a remote endpoint where
-	the display is connected.
-
-Example:
-
-display-controller@6a000000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "faraday,tve200";
-	reg = <0x6a000000 0x1000>;
-	interrupts = <13 IRQ_TYPE_EDGE_RISING>;
-	resets = <&syscon GEMINI_RESET_TVC>;
-	clocks = <&syscon GEMINI_CLK_GATE_TVC>,
-		 <&syscon GEMINI_CLK_TVC>;
-	clock-names = "PCLK", "TVE";
-
-	port@0 {
-		reg = <0>;
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.yaml b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
new file mode 100644
index 000000000000..e2ee77767321
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/faraday,tve200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday TV Encoder TVE200
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,tve200
+      - items:
+          - const: cortina,gemini-tvc
+          - const: faraday,tve200
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: PCLK
+      - const: TVE
+
+  clocks:
+    minItems: 2
+
+  resets:
+    minItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+    display-controller@6a000000 {
+      compatible = "faraday,tve200";
+      reg = <0x6a000000 0x1000>;
+      interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+      resets = <&syscon GEMINI_RESET_TVC>;
+      clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+               <&syscon GEMINI_CLK_TVC>;
+      clock-names = "PCLK", "TVE";
+
+      port {
+        display_out: endpoint {
+          remote-endpoint = <&panel_in>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
new file mode 100644
index 000000000000..876015a44a1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX LCD Interface (LCDIF)
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+  - Stefan Agner <stefan@agner.ch>
+
+description: |
+  (e)LCDIF display controller found in the Freescale/NXP i.MX SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx23-lcdif
+          - fsl,imx28-lcdif
+          - fsl,imx6sx-lcdif
+          - fsl,imx8mp-lcdif
+      - items:
+          - enum:
+              - fsl,imx6sl-lcdif
+              - fsl,imx6sll-lcdif
+              - fsl,imx6ul-lcdif
+              - fsl,imx7d-lcdif
+              - fsl,imx8mm-lcdif
+              - fsl,imx8mn-lcdif
+              - fsl,imx8mq-lcdif
+          - const: fsl,imx6sx-lcdif
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Pixel clock
+      - description: Bus clock
+      - description: Display AXI clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: pix
+      - const: axi
+      - const: disp_axi
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: The LCDIF output port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - port
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx6sx-lcdif
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          maxItems: 3
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6sx-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display-controller@2220000 {
+        compatible = "fsl,imx6sx-lcdif";
+        reg = <0x02220000 0x4000>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+                 <&clks IMX6SX_CLK_LCDIF_APB>,
+                 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+        clock-names = "pix", "axi", "disp_axi";
+
+        port {
+            endpoint {
+                remote-endpoint = <&panel_in>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/ht16k33.txt b/Documentation/devicetree/bindings/display/ht16k33.txt
deleted file mode 100644
index d5a8b070b467..000000000000
--- a/Documentation/devicetree/bindings/display/ht16k33.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Holtek ht16k33 RAM mapping 16*8 LED controller driver with keyscan
--------------------------------------------------------------------------------
-
-Required properties:
-- compatible:		"holtek,ht16k33"
-- reg:			I2C slave address of the chip.
-- interrupts:		Interrupt specification for the key pressed interrupt.
-- refresh-rate-hz:	Display update interval in HZ.
-- debounce-delay-ms:	Debouncing interval time in milliseconds.
-- linux,keymap: 	The keymap for keys as described in the binding
-			document (devicetree/bindings/input/matrix-keymap.txt).
-
-Optional properties:
-- linux,no-autorepeat:	Disable keyrepeat.
-- default-brightness-level: Initial brightness level [0-15] (default: 15).
-
-Example:
-
-&i2c1 {
-	ht16k33: ht16k33@70 {
-		compatible = "holtek,ht16k33";
-		reg = <0x70>;
-		refresh-rate-hz = <20>;
-		debounce-delay-ms = <50>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
-		linux,keymap = <
-			MATRIX_KEY(2, 0, KEY_F6)
-			MATRIX_KEY(3, 0, KEY_F8)
-			MATRIX_KEY(4, 0, KEY_F10)
-			MATRIX_KEY(5, 0, KEY_F4)
-			MATRIX_KEY(6, 0, KEY_F2)
-			MATRIX_KEY(2, 1, KEY_F5)
-			MATRIX_KEY(3, 1, KEY_F7)
-			MATRIX_KEY(4, 1, KEY_F9)
-			MATRIX_KEY(5, 1, KEY_F3)
-			MATRIX_KEY(6, 1, KEY_F1)
-		>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
deleted file mode 100644
index 169b32e4ee4e..000000000000
--- a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Ilitek ILI9341 display panels
-
-This binding is for display panels using an Ilitek ILI9341 controller in SPI
-mode.
-
-Required properties:
-- compatible:	"adafruit,yx240qv29", "ilitek,ili9341"
-- dc-gpios:	D/C pin
-- reset-gpios:	Reset pin
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
-- backlight:	phandle of the backlight device attached to the panel
-
-Example:
-	display@0{
-		compatible = "adafruit,yx240qv29", "ilitek,ili9341";
-		reg = <0>;
-		spi-max-frequency = <32000000>;
-		dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		rotation = <270>;
-		backlight = <&backlight>;
-	};
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
new file mode 100644
index 000000000000..1f8f2182e2f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ilitek,ili9486.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9486 display panels
+
+maintainers:
+  - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
+
+description:
+  This binding is for display panels using an Ilitek ILI9486 controller in SPI
+  mode.
+
+allOf:
+  - $ref: panel/panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # Waveshare 3.5" 320x480 Color TFT LCD
+          - waveshare,rpi-lcd-35
+          # Ozzmaker 3.5" 320x480 Color TFT LCD
+          - ozzmaker,piscreen
+      - const: ilitek,ili9486
+
+  spi-max-frequency:
+    maximum: 32000000
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX)
+
+  backlight: true
+  reg: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight: backlight {
+            compatible = "gpio-backlight";
+            gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+
+            display@0{
+                    compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486";
+                    reg = <0>;
+                    spi-max-frequency = <32000000>;
+                    dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+                    rotation = <180>;
+                    backlight = <&backlight>;
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml
new file mode 100644
index 000000000000..af7fe9c4d196
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 DWC HDMI TX Encoder
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+  with a companion PHY IP.
+
+allOf:
+  - $ref: ../bridge/synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6dl-hdmi
+      - fsl,imx6q-hdmi
+
+  reg-io-width:
+    const: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  ddc-i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The HDMI DDC bus can be connected to either a system I2C master or the
+      functionally-reduced I2C master contained in the DWC HDMI. When connected
+      to a system I2C master this property contains a phandle to that I2C
+      master controller.
+
+  gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the iomuxc-gpr region containing the HDMI multiplexer control
+      register.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      This device has four video ports, corresponding to the four inputs of the
+      HDMI multiplexer. Each port shall have a single endpoint.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: First input of the HDMI multiplexer
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Second input of the HDMI multiplexer
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Third input of the HDMI multiplexer
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Fourth input of the HDMI multiplexer
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+      - required:
+          - port@2
+      - required:
+          - port@3
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpr
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    hdmi: hdmi@120000 {
+        reg = <0x00120000 0x9000>;
+        interrupts = <0 115 0x04>;
+        gpr = <&gpr>;
+        clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
+                 <&clks IMX6QDL_CLK_HDMI_ISFR>;
+        clock-names = "iahb", "isfr";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                hdmi_mux_0: endpoint {
+                    remote-endpoint = <&ipu1_di0_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                hdmi_mux_1: endpoint {
+                    remote-endpoint = <&ipu1_di1_hdmi>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
index 5bf77f6dd19d..3c35338a2867 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
@@ -12,7 +12,7 @@ Required properties:
 example:
 
 display-subsystem {
-	compatible = "fsl,display-subsystem";
+	compatible = "fsl,imx-display-subsystem";
 	ports = <&ipu_di0>;
 };
 
@@ -68,7 +68,7 @@ Required properties:
   datasheet
 - clocks : phandle to the PRE axi clock input, as described
   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 - clock-names: should be "axi"
 - interrupts: should contain the PRE interrupt
 - fsl,iram: phandle pointing to the mmio-sram device node, that should be
@@ -94,7 +94,7 @@ Required properties:
   datasheet
 - clocks : phandles to the PRG ipg and axi clock inputs, as described
   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 - clock-names: should be "ipg" and "axi"
 - fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
   PRE as the first entry and the muxable PREs following.
diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt
deleted file mode 100644
index 6d021e71c9cf..000000000000
--- a/Documentation/devicetree/bindings/display/imx/hdmi.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Freescale i.MX6 DWC HDMI TX Encoder
-===================================
-
-The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
-with a companion PHY IP.
-
-These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
-Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
-following device-specific properties.
-
-
-Required properties:
-
-- compatible : Shall be one of "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
-- reg: See dw_hdmi.txt.
-- interrupts: HDMI interrupt number
-- clocks: See dw_hdmi.txt.
-- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
-- ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports,
-  numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer.
-  Each port shall have a single endpoint.
-- gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI
-  multiplexer control register.
-
-Optional properties
-
-- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
-  or the functionally-reduced I2C master contained in the DWC HDMI. When
-  connected to a system I2C master this property contains a phandle to that
-  I2C master controller.
-
-
-Example:
-
-	gpr: iomuxc-gpr@20e0000 {
-		/* ... */
-	};
-
-        hdmi: hdmi@120000 {
-                #address-cells = <1>;
-                #size-cells = <0>;
-                compatible = "fsl,imx6q-hdmi";
-                reg = <0x00120000 0x9000>;
-                interrupts = <0 115 0x04>;
-                gpr = <&gpr>;
-                clocks = <&clks 123>, <&clks 124>;
-                clock-names = "iahb", "isfr";
-                ddc-i2c-bus = <&i2c2>;
-
-                port@0 {
-                        reg = <0>;
-
-                        hdmi_mux_0: endpoint {
-                                remote-endpoint = <&ipu1_di0_hdmi>;
-                        };
-                };
-
-                port@1 {
-                        reg = <1>;
-
-                        hdmi_mux_1: endpoint {
-                                remote-endpoint = <&ipu1_di1_hdmi>;
-                        };
-                };
-        };
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
index 38c637fa39dd..8e6e7d797943 100644
--- a/Documentation/devicetree/bindings/display/imx/ldb.txt
+++ b/Documentation/devicetree/bindings/display/imx/ldb.txt
@@ -30,8 +30,8 @@ Required properties:
                 "di2_sel" - IPU2 DI0 mux
                 "di3_sel" - IPU2 DI1 mux
         The needed clock numbers for each are documented in
-        Documentation/devicetree/bindings/clock/imx5-clock.txt, and in
-        Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+        Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
+        Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 
 Optional properties:
  - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
new file mode 100644
index 000000000000..989ab312c1f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 NXP
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: iMX8MQ Display Controller Subsystem (DCSS)
+
+maintainers:
+  - Laurentiu Palcu <laurentiu.palcu@nxp.com>
+
+description:
+
+  The DCSS (display controller sub system) is used to source up to three
+  display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP
+  2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10
+  image processing capabilities are included to provide a solution capable of
+  driving next generation high dynamic range displays.
+
+properties:
+  compatible:
+    const: nxp,imx8mq-dcss
+
+  reg:
+    items:
+      - description: DCSS base address and size, up to IRQ steer start
+      - description: DCSS BLKCTL base address and size
+
+  interrupts:
+    items:
+      - description: Context loader completion and error interrupt
+      - description: DTG interrupt used to signal context loader trigger time
+      - description: DTG interrupt for Vblank
+
+  interrupt-names:
+    items:
+      - const: ctxld
+      - const: ctxld_kick
+      - const: vblank
+
+  clocks:
+    items:
+      - description: Display APB clock for all peripheral PIO access interfaces
+      - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL
+      - description: RTRAM clock
+      - description: Pixel clock, can be driven either by HDMI phy clock or MIPI
+      - description: DTRC clock, needed by video decompressor
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: rtrm
+      - const: pix
+      - const: dtrc
+
+  assigned-clocks:
+    items:
+      - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT
+      - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM
+      - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or
+                     IMX8MQ_VIDEO_PLL1_REF_SEL
+
+  assigned-clock-parents:
+    items:
+      - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
+      - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
+      - description: Phandle and clock specifier of IMX8MQ_CLK_27M
+
+  assigned-clock-rates:
+    items:
+      - description: Must be 800 MHz
+      - description: Must be 400 MHz
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node pointing to the input port of a HDMI/DP or MIPI display bridge.
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    dcss: display-controller@32e00000 {
+        compatible = "nxp,imx8mq-dcss";
+        reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>;
+        interrupts = <6>, <8>, <9>;
+        interrupt-names = "ctxld", "ctxld_kick", "vblank";
+        interrupt-parent = <&irqsteer>;
+        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>, <&clk IMX8MQ_CLK_DISP_AXI_ROOT>,
+                 <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>, <&clk IMX8MQ_VIDEO2_PLL_OUT>,
+                 <&clk IMX8MQ_CLK_DISP_DTRC>;
+        clock-names = "apb", "axi", "rtrm", "pix", "dtrc";
+        assigned-clocks = <&clk IMX8MQ_CLK_DISP_AXI>, <&clk IMX8MQ_CLK_DISP_RTRM>,
+                          <&clk IMX8MQ_VIDEO2_PLL1_REF_SEL>;
+        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_SYS1_PLL_800M>,
+                                 <&clk IMX8MQ_CLK_27M>;
+        assigned-clock-rates = <800000000>,
+                               <400000000>;
+        port {
+            dcss_out: endpoint {
+                remote-endpoint = <&hdmi_in>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
new file mode 100644
index 000000000000..3f93def2c5a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ingenic,ipu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs Image Processing Unit (IPU) devicetree bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4725b-ipu
+          - ingenic,jz4760-ipu
+      - items:
+          - const: ingenic,jz4770-ipu
+          - const: ingenic,jz4760-ipu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipu
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+    ipu@13080000 {
+      compatible = "ingenic,jz4770-ipu", "ingenic,jz4760-ipu";
+      reg = <0x13080000 0x800>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <29>;
+
+      clocks = <&cgu JZ4770_CLK_IPU>;
+      clock-names = "ipu";
+
+      port {
+        ipu_ep: endpoint {
+          remote-endpoint = <&lcdc_ep>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.txt b/Documentation/devicetree/bindings/display/ingenic,lcd.txt
deleted file mode 100644
index 01e3261defb6..000000000000
--- a/Documentation/devicetree/bindings/display/ingenic,lcd.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Ingenic JZ47xx LCD driver
-
-Required properties:
-- compatible: one of:
-  * ingenic,jz4740-lcd
-  * ingenic,jz4725b-lcd
-  * ingenic,jz4770-lcd
-- reg: LCD registers location and length
-- clocks: LCD pixclock and device clock specifiers.
-	   The device clock is only required on the JZ4740.
-- clock-names: "lcd_pclk" and "lcd"
-- interrupts: Specifies the interrupt line the LCD controller is connected to.
-
-Example:
-
-panel {
-	compatible = "sharp,ls020b1dd01d";
-
-	backlight = <&backlight>;
-	power-supply = <&vcc>;
-
-	port {
-		panel_input: endpoint {
-			remote-endpoint = <&panel_output>;
-		};
-	};
-};
-
-
-lcd: lcd-controller@13050000 {
-	compatible = "ingenic,jz4725b-lcd";
-	reg = <0x13050000 0x1000>;
-
-	interrupt-parent = <&intc>;
-	interrupts = <31>;
-
-	clocks = <&cgu JZ4725B_CLK_LCD>;
-	clock-names = "lcd";
-
-	port {
-		panel_output: endpoint {
-			remote-endpoint = <&panel_input>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
new file mode 100644
index 000000000000..c0bb02fb49f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ingenic,lcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs LCD controller devicetree bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: "^lcd-controller@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - ingenic,jz4740-lcd
+      - ingenic,jz4725b-lcd
+      - ingenic,jz4760-lcd
+      - ingenic,jz4760b-lcd
+      - ingenic,jz4770-lcd
+      - ingenic,jz4780-lcd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Pixel clock
+      - description: Module clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: lcd_pclk
+      - const: lcd
+    minItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DPI output, to interface with TFT panels.
+
+      port@8:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Link to the Image Processing Unit (IPU).
+          (See ingenic,ipu.yaml).
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ingenic,jz4740-lcd
+          - ingenic,jz4780-lcd
+then:
+  properties:
+    clocks:
+      minItems: 2
+    clock-names:
+      minItems: 2
+else:
+  properties:
+    clocks:
+      maxItems: 1
+    clock-names:
+      maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+    lcd-controller@13050000 {
+      compatible = "ingenic,jz4740-lcd";
+      reg = <0x13050000 0x1000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <30>;
+
+      clocks = <&cgu JZ4740_CLK_LCD_PCLK>, <&cgu JZ4740_CLK_LCD>;
+      clock-names = "lcd_pclk", "lcd";
+
+      port {
+        endpoint {
+          remote-endpoint = <&panel_input>;
+        };
+      };
+    };
+
+  - |
+    #include <dt-bindings/clock/ingenic,jz4725b-cgu.h>
+    lcd-controller@13050000 {
+      compatible = "ingenic,jz4725b-lcd";
+      reg = <0x13050000 0x1000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <31>;
+
+      clocks = <&cgu JZ4725B_CLK_LCD>;
+      clock-names = "lcd_pclk";
+
+      port {
+        endpoint {
+          remote-endpoint = <&panel_input>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
new file mode 100644
index 000000000000..bc6622b010ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/intel,keembay-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Devicetree bindings for Intel Keem Bay display controller
+
+maintainers:
+  - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
+  - Edmond J Dea <edmund.j.dea@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-display
+
+  reg:
+    items:
+      - description: LCD registers range
+
+  reg-names:
+    items:
+      - const: lcd
+
+  clocks:
+    items:
+      - description: LCD controller clock
+      - description: pll0 clock
+
+  clock-names:
+    items:
+      - const: clk_lcd
+      - const: clk_pll0
+
+  interrupts:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Display output node to DSI.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display@20930000 {
+        compatible = "intel,keembay-display";
+        reg = <0x20930000 0x3000>;
+        reg-names = "lcd";
+        interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&scmi_clk 0x83>,
+                 <&scmi_clk 0x0>;
+        clock-names = "clk_lcd", "clk_pll0";
+
+        port {
+            disp_out: endpoint {
+                remote-endpoint = <&dsi_in>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml b/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml
new file mode 100644
index 000000000000..a222b52d8b8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/intel,keembay-msscam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Devicetree bindings for Intel Keem Bay MSSCAM
+
+maintainers:
+  - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
+  - Edmond J Dea <edmund.j.dea@intel.com>
+
+description: |
+   MSSCAM controls local clocks in the display subsystem namely LCD clocks and
+   MIPI DSI clocks. It also configures the interconnect between LCD and
+   MIPI DSI.
+
+properties:
+  compatible:
+    items:
+      - const: intel,keembay-msscam
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  reg-io-width:
+    const: 4
+
+required:
+  - compatible
+  - reg
+  - reg-io-width
+
+additionalProperties: false
+
+examples:
+  - |
+    msscam:msscam@20910000 {
+        compatible = "intel,keembay-msscam", "syscon";
+        reg = <0x20910000 0x30>;
+        reg-io-width = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/display/lvds.yaml b/Documentation/devicetree/bindings/display/lvds.yaml
new file mode 100644
index 000000000000..7cd2ce7e9c33
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/lvds.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LVDS Display Common Properties
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+  LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
+  incompatible data link layers have been used over time to transmit image data
+  to LVDS devices. This bindings supports devices compatible with the following
+  specifications.
+
+  [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
+  1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
+  [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
+  Semiconductor
+  [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
+  Electronics Standards Association (VESA)
+
+  Device compatible with those specifications have been marketed under the
+  FPD-Link and FlatLink brands.
+
+properties:
+  data-mapping:
+    enum:
+      - jeida-18
+      - jeida-24
+      - vesa-24
+    description: |
+      The color signals mapping order.
+
+      LVDS data mappings are defined as follows.
+
+      - "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and
+        [VESA] specifications. Data are transferred as follows on 3 LVDS lanes.
+
+      Slot          0       1       2       3       4       5       6
+                ________________                         _________________
+      Clock                     \_______________________/
+                  ______  ______  ______  ______  ______  ______  ______
+      DATA0     ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
+      DATA1     ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
+      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
+
+      - "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI]
+        specifications. Data are transferred as follows on 4 LVDS lanes.
+
+      Slot          0       1       2       3       4       5       6
+                ________________                         _________________
+      Clock                     \_______________________/
+                  ______  ______  ______  ______  ______  ______  ______
+      DATA0     ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__><
+      DATA1     ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__><
+      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__><
+      DATA3     ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
+
+      - "vesa-24" - 24-bit data mapping compatible with the [VESA] specification.
+        Data are transferred as follows on 4 LVDS lanes.
+
+      Slot          0       1       2       3       4       5       6
+                ________________                         _________________
+      Clock                     \_______________________/
+                  ______  ______  ______  ______  ______  ______  ______
+      DATA0     ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
+      DATA1     ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
+      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
+      DATA3     ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
+
+      Control signals are mapped as follows.
+
+      CTL0: HSync
+      CTL1: VSync
+      CTL2: Data Enable
+      CTL3: 0
+
+  data-mirror:
+    type: boolean
+    description:
+      If set, reverse the bit order described in the data mappings below on all
+      data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
new file mode 100644
index 000000000000..d4d585485e7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,aal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display adaptive ambient light processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display adaptive ambient light processor, namely AAL,
+  is responsible for backlight power saving and sunlight visibility improving.
+  AAL device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-aal
+          - mediatek,mt8183-disp-aal
+      - items:
+          - enum:
+              - mediatek,mt2712-disp-aal
+          - const: mediatek,mt8173-disp-aal
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-aal
+              - mediatek,mt8192-disp-aal
+              - mediatek,mt8195-disp-aal
+          - const: mediatek,mt8183-disp-aal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: AAL Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aal@14015000 {
+           compatible = "mediatek,mt8173-disp-aal";
+           reg = <0 0x14015000 0 0x1000>;
+           interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+           power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+           clocks = <&mmsys CLK_MM_DISP_AAL>;
+           mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
new file mode 100644
index 000000000000..63fb02014a56
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color correction
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display color correction, namely CCORR, reproduces correct color
+  on panels with different color gamut.
+  CCORR device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8183-disp-ccorr
+      - items:
+          - const: mediatek,mt8192-disp-ccorr
+      - items:
+          - enum:
+              - mediatek,mt8195-disp-ccorr
+          - const: mediatek,mt8192-disp-ccorr
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ccorr
+          - const: mediatek,mt8183-disp-ccorr
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: CCORR Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ccorr0: ccorr@1400f000 {
+            compatible = "mediatek,mt8183-disp-ccorr";
+            reg = <0 0x1400f000 0 0x1000>;
+            interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml
new file mode 100644
index 000000000000..66288b9f0aa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek HDMI CEC Controller Device Tree Bindings
+
+maintainers:
+  - CK Hu <ck.hu@mediatek.com>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  The HDMI CEC controller handles hotplug detection and CEC communication.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7623-cec
+      - mediatek,mt8167-cec
+      - mediatek,mt8173-cec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    cec: cec@10013000 {
+        compatible = "mediatek,mt8173-cec";
+        reg = <0x10013000 0xbc>;
+        interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&infracfg CLK_INFRA_CEC>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
new file mode 100644
index 000000000000..d2f89ee7996f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,color.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display color processor, namely COLOR, provides hue, luma and
+  saturation adjustments to get better picture quality and to have one panel
+  resemble the other in their output characteristics.
+  COLOR device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt2701-disp-color
+      - items:
+          - const: mediatek,mt8167-disp-color
+      - items:
+          - const: mediatek,mt8173-disp-color
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-color
+              - mediatek,mt2712-disp-color
+          - const: mediatek,mt2701-disp-color
+      - items:
+          - enum:
+              - mediatek,mt8183-disp-color
+              - mediatek,mt8186-disp-color
+              - mediatek,mt8192-disp-color
+              - mediatek,mt8195-disp-color
+          - const: mediatek,mt8173-disp-color
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: COLOR Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        color0: color@14013000 {
+            compatible = "mediatek,mt8173-disp-color";
+            reg = <0 0x14013000 0 0x1000>;
+            interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
deleted file mode 100644
index b91e709db7a4..000000000000
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ /dev/null
@@ -1,209 +0,0 @@
-Mediatek display subsystem
-==========================
-
-The Mediatek display subsystem consists of various DISP function blocks in the
-MMSYS register space. The connections between them can be configured by output
-and input selectors in the MMSYS_CONFIG register space. Pixel clock and start
-of frame signal are distributed to the other function blocks by a DISP_MUTEX
-function block.
-
-All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node.
-For a description of the MMSYS_CONFIG binding, see
-Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt.
-
-DISP function blocks
-====================
-
-A display stream starts at a source function block that reads pixel data from
-memory and ends with a sink function block that drives pixels on a display
-interface, or writes pixels back to memory. All DISP function blocks have
-their own register space, interrupt, and clock gate. The blocks that can
-access memory additionally have to list the IOMMU and local arbiter they are
-connected to.
-
-For a description of the display interface sink function blocks, see
-Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and
-Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt.
-
-Required properties (all function blocks):
-- compatible: "mediatek,<chip>-disp-<function>", one of
-	"mediatek,<chip>-disp-ovl"   		- overlay (4 layers, blending, csc)
-	"mediatek,<chip>-disp-ovl-2l"           - overlay (2 layers, blending, csc)
-	"mediatek,<chip>-disp-rdma"  		- read DMA / line buffer
-	"mediatek,<chip>-disp-wdma"  		- write DMA
-	"mediatek,<chip>-disp-ccorr"            - color correction
-	"mediatek,<chip>-disp-color" 		- color processor
-	"mediatek,<chip>-disp-dither"           - dither
-	"mediatek,<chip>-disp-aal"   		- adaptive ambient light controller
-	"mediatek,<chip>-disp-gamma" 		- gamma correction
-	"mediatek,<chip>-disp-merge" 		- merge streams from two RDMA sources
-	"mediatek,<chip>-disp-split" 		- split stream to two encoders
-	"mediatek,<chip>-disp-ufoe"  		- data compression engine
-	"mediatek,<chip>-dsi"        		- DSI controller, see mediatek,dsi.txt
-	"mediatek,<chip>-dpi"        		- DPI controller, see mediatek,dpi.txt
-	"mediatek,<chip>-disp-mutex" 		- display mutex
-	"mediatek,<chip>-disp-od"    		- overdrive
-  the supported chips are mt2701, mt2712 and mt8173.
-- reg: Physical base address and length of the function block register space
-- interrupts: The interrupt signal from the function block (required, except for
-  merge and split function blocks).
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-  For most function blocks this is just a single clock input. Only the DSI and
-  DPI controller nodes have multiple clock inputs. These are documented in
-  mediatek,dsi.txt and mediatek,dpi.txt, respectively.
-  An exception is that the mt8183 mutex is always free running with no clocks property.
-
-Required properties (DMA function blocks):
-- compatible: Should be one of
-	"mediatek,<chip>-disp-ovl"
-	"mediatek,<chip>-disp-rdma"
-	"mediatek,<chip>-disp-wdma"
-  the supported chips are mt2701 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
-- iommus: Should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
-  for details.
-
-Examples:
-
-mmsys: clock-controller@14000000 {
-	compatible = "mediatek,mt8173-mmsys", "syscon";
-	reg = <0 0x14000000 0 0x1000>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	#clock-cells = <1>;
-};
-
-ovl0: ovl@1400c000 {
-	compatible = "mediatek,mt8173-disp-ovl";
-	reg = <0 0x1400c000 0 0x1000>;
-	interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_OVL0>;
-	iommus = <&iommu M4U_PORT_DISP_OVL0>;
-	mediatek,larb = <&larb0>;
-};
-
-ovl1: ovl@1400d000 {
-	compatible = "mediatek,mt8173-disp-ovl";
-	reg = <0 0x1400d000 0 0x1000>;
-	interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_OVL1>;
-	iommus = <&iommu M4U_PORT_DISP_OVL1>;
-	mediatek,larb = <&larb4>;
-};
-
-rdma0: rdma@1400e000 {
-	compatible = "mediatek,mt8173-disp-rdma";
-	reg = <0 0x1400e000 0 0x1000>;
-	interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
-	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-	mediatek,larb = <&larb0>;
-};
-
-rdma1: rdma@1400f000 {
-	compatible = "mediatek,mt8173-disp-rdma";
-	reg = <0 0x1400f000 0 0x1000>;
-	interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
-	iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-	mediatek,larb = <&larb4>;
-};
-
-rdma2: rdma@14010000 {
-	compatible = "mediatek,mt8173-disp-rdma";
-	reg = <0 0x14010000 0 0x1000>;
-	interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_RDMA2>;
-	iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-	mediatek,larb = <&larb4>;
-};
-
-wdma0: wdma@14011000 {
-	compatible = "mediatek,mt8173-disp-wdma";
-	reg = <0 0x14011000 0 0x1000>;
-	interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_WDMA0>;
-	iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-	mediatek,larb = <&larb0>;
-};
-
-wdma1: wdma@14012000 {
-	compatible = "mediatek,mt8173-disp-wdma";
-	reg = <0 0x14012000 0 0x1000>;
-	interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_WDMA1>;
-	iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-	mediatek,larb = <&larb4>;
-};
-
-color0: color@14013000 {
-	compatible = "mediatek,mt8173-disp-color";
-	reg = <0 0x14013000 0 0x1000>;
-	interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_COLOR0>;
-};
-
-color1: color@14014000 {
-	compatible = "mediatek,mt8173-disp-color";
-	reg = <0 0x14014000 0 0x1000>;
-	interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_COLOR1>;
-};
-
-aal@14015000 {
-	compatible = "mediatek,mt8173-disp-aal";
-	reg = <0 0x14015000 0 0x1000>;
-	interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_AAL>;
-};
-
-gamma@14016000 {
-	compatible = "mediatek,mt8173-disp-gamma";
-	reg = <0 0x14016000 0 0x1000>;
-	interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_GAMMA>;
-};
-
-ufoe@1401a000 {
-	compatible = "mediatek,mt8173-disp-ufoe";
-	reg = <0 0x1401a000 0 0x1000>;
-	interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_UFOE>;
-};
-
-dsi0: dsi@1401b000 {
-	/* See mediatek,dsi.txt for details */
-};
-
-dpi0: dpi@1401d000 {
-	/* See mediatek,dpi.txt for details */
-};
-
-mutex: mutex@14020000 {
-	compatible = "mediatek,mt8173-disp-mutex";
-	reg = <0 0x14020000 0 0x1000>;
-	interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_MUTEX_32K>;
-};
-
-od@14023000 {
-	compatible = "mediatek,mt8173-disp-od";
-	reg = <0 0x14023000 0 0x1000>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_OD>;
-};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
new file mode 100644
index 000000000000..8ad8187c02d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dither.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display dither processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display dither processor, namely DITHER, works by approximating
+  unavailable colors with available colors and by mixing and matching available
+  colors to mimic unavailable ones.
+  DITHER device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8183-disp-dither
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-dither
+              - mediatek,mt8192-disp-dither
+              - mediatek,mt8195-disp-dither
+          - const: mediatek,mt8183-disp-dither
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: DITHER Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dither0: dither@14012000 {
+            compatible = "mediatek,mt8183-disp-dither";
+            reg = <0 0x14012000 0 0x1000>;
+            interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
new file mode 100644
index 000000000000..ff781f2174a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Port Controller
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  MediaTek DP and eDP are different hardwares and there are some features
+  which are not supported for eDP. For example, audio is not supported for
+  eDP. Therefore, we need to use two different compatibles to describe them.
+  In addition, We just need to enable the power domain of DP, so the clock
+  of DP is generated by itself and we are not using other PLL to generate
+  clocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-dp-tx
+      - mediatek,mt8195-edp-tx
+
+  reg:
+    maxItems: 1
+
+  nvmem-cells:
+    maxItems: 1
+    description: efuse data for display port calibration
+
+  nvmem-cell-names:
+    const: dp_calibration_data
+
+  power-domains:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the controller, usually dp_intf
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output endpoint of the controller
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                description: |
+                  number of lanes supported by the hardware.
+                  The possible values:
+                  0       - For 1 lane enabled in IP.
+                  0 1     - For 2 lanes enabled in IP.
+                  0 1 2 3 - For 4 lanes enabled in IP.
+                minItems: 1
+                maxItems: 4
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+  max-linkrate-mhz:
+    enum: [ 1620, 2700, 5400, 8100 ]
+    description: maximum link rate supported by the hardware.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ports
+  - max-linkrate-mhz
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    dptx@1c600000 {
+        compatible = "mediatek,mt8195-dp-tx";
+        reg = <0x1c600000 0x8000>;
+        power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
+        interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+        max-linkrate-mhz = <8100>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dptx_in: endpoint {
+                    remote-endpoint = <&dp_intf0_out>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                dptx_out: endpoint {
+                    data-lanes = <0 1 2 3>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
deleted file mode 100644
index b6a7e7397b8b..000000000000
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Mediatek DPI Device
-===================
-
-The Mediatek DPI function block is a sink of the display subsystem and
-provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
-output bus.
-
-Required properties:
-- compatible: "mediatek,<chip>-dpi"
-- reg: Physical base address and length of the controller's registers
-- interrupts: The interrupt signal from the function block.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "pixel", "engine", and "pll"
-- port: Output port node with endpoint definitions as described in
-  Documentation/devicetree/bindings/graph.txt. This port should be connected
-  to the input port of an attached HDMI or LVDS encoder chip.
-
-Example:
-
-dpi0: dpi@1401d000 {
-	compatible = "mediatek,mt8173-dpi";
-	reg = <0 0x1401d000 0 0x1000>;
-	interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&mmsys CLK_MM_DPI_PIXEL>,
-		 <&mmsys CLK_MM_DPI_ENGINE>,
-		 <&apmixedsys CLK_APMIXED_TVDPLL>;
-	clock-names = "pixel", "engine", "pll";
-
-	port {
-		dpi0_out: endpoint {
-			remote-endpoint = <&hdmi0_in>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
new file mode 100644
index 000000000000..5bb23e97cf33
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DPI and DP_INTF Controller
+
+maintainers:
+  - CK Hu <ck.hu@mediatek.com>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  The MediaTek DPI and DP_INTF function blocks are a sink of the display
+  subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
+  parallel output bus.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-dpi
+      - mediatek,mt7623-dpi
+      - mediatek,mt8173-dpi
+      - mediatek,mt8183-dpi
+      - mediatek,mt8186-dpi
+      - mediatek,mt8192-dpi
+      - mediatek,mt8195-dp-intf
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Pixel Clock
+      - description: Engine Clock
+      - description: DPI PLL
+
+  clock-names:
+    items:
+      - const: pixel
+      - const: engine
+      - const: pll
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    items:
+      - const: default
+      - const: sleep
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Output port node. This port should be connected to the input port of an
+      attached HDMI, LVDS or DisplayPort encoder chip.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+
+    dpi0: dpi@1401d000 {
+        compatible = "mediatek,mt8173-dpi";
+        reg = <0x1401d000 0x1000>;
+        interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&mmsys CLK_MM_DPI_PIXEL>,
+             <&mmsys CLK_MM_DPI_ENGINE>,
+             <&apmixedsys CLK_APMIXED_TVDPLL>;
+        clock-names = "pixel", "engine", "pll";
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&dpi_pin_func>;
+        pinctrl-1 = <&dpi_pin_idle>;
+
+        port {
+            dpi0_out: endpoint {
+                remote-endpoint = <&hdmi0_in>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
new file mode 100644
index 000000000000..49248864514b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: mediatek display DSC controller
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The DSC standard is a specification of the algorithms used for
+  compressing and decompressing image display streams, including
+  the specification of the syntax and semantics of the compressed
+  video bit stream. DSC is designed for real-time systems with
+  real-time compression, transmission, decompression and Display.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8195-disp-dsc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: DSC Wrapper Clock
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  mediatek,gce-client-reg:
+    description:
+      The register of client driver can be configured by gce with 4 arguments
+      defined in this property, such as phandle of gce, subsys id,
+      register offset and size.
+      Each subsys id is mapping to a base address of display function blocks
+      register which is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsc0: disp_dsc_wrap@1c009000 {
+            compatible = "mediatek,mt8195-disp-dsc";
+            reg = <0 0x1c009000 0 0x1000>;
+            interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+            clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
+            mediatek,gce-client-reg = <&gce1 SUBSYS_1c00XXXX 0x9000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
deleted file mode 100644
index a19a6cc375ed..000000000000
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Mediatek DSI Device
-===================
-
-The Mediatek DSI function block is a sink of the display subsystem and can
-drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
-channel output.
-
-Required properties:
-- compatible: "mediatek,<chip>-dsi"
-  the supported chips are mt2701, mt8173 and mt8183.
-- reg: Physical base address and length of the controller's registers
-- interrupts: The interrupt signal from the function block.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "engine", "digital", and "hs"
-- phys: phandle link to the MIPI D-PHY controller.
-- phy-names: must contain "dphy"
-- port: Output port node with endpoint definitions as described in
-  Documentation/devicetree/bindings/graph.txt. This port should be connected
-  to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
-
-MIPI TX Configuration Module
-============================
-
-The MIPI TX configuration module controls the MIPI D-PHY.
-
-Required properties:
-- compatible: "mediatek,<chip>-mipi-tx"
-  the supported chips are mt2701, mt8173 and mt8183.
-- reg: Physical base address and length of the controller's registers
-- clocks: PLL reference clock
-- clock-output-names: name of the output clock line to the DSI encoder
-- #clock-cells: must be <0>;
-- #phy-cells: must be <0>.
-
-Example:
-
-mipi_tx0: mipi-dphy@10215000 {
-	compatible = "mediatek,mt8173-mipi-tx";
-	reg = <0 0x10215000 0 0x1000>;
-	clocks = <&clk26m>;
-	clock-output-names = "mipi_tx0_pll";
-	#clock-cells = <0>;
-	#phy-cells = <0>;
-};
-
-dsi0: dsi@1401b000 {
-	compatible = "mediatek,mt8173-dsi";
-	reg = <0 0x1401b000 0 0x1000>;
-	interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,
-		 <&mipi_tx0>;
-	clock-names = "engine", "digital", "hs";
-	phys = <&mipi_tx0>;
-	phy-names = "dphy";
-
-	port {
-		dsi0_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
new file mode 100644
index 000000000000..b18d6a57c6e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DSI Controller Device Tree Bindings
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Jitao Shi <jitao.shi@mediatek.com>
+  - Xinlei Lee <xinlei.lee@mediatek.com>
+
+description: |
+  The MediaTek DSI function block is a sink of the display subsystem and can
+  drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
+  channel output.
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-dsi
+      - mediatek,mt7623-dsi
+      - mediatek,mt8167-dsi
+      - mediatek,mt8173-dsi
+      - mediatek,mt8183-dsi
+      - mediatek,mt8186-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Engine Clock
+      - description: Digital Clock
+      - description: HS Clock
+
+  clock-names:
+    items:
+      - const: engine
+      - const: digital
+      - const: hs
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: dphy
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Output port node. This port should be connected to the input
+      port of an attached DSI panel or DSI-to-eDP encoder chip.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/mt8183-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsi0: dsi@14014000 {
+            compatible = "mediatek,mt8183-dsi";
+            reg = <0 0x14014000 0 0x1000>;
+            interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DSI0_MM>,
+                <&mmsys CLK_MM_DSI0_IF>,
+                <&mipi_tx0>;
+            clock-names = "engine", "digital", "hs";
+            resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
+            phys = <&mipi_tx0>;
+            phy-names = "dphy";
+            port {
+                dsi0_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
new file mode 100644
index 000000000000..a89ea0ea7542
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,gamma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display gamma correction
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display gamma correction, namely GAMMA, provides a nonlinear
+  operation used to adjust luminance in display system.
+  GAMMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8173-disp-gamma
+      - items:
+          - const: mediatek,mt8183-disp-gamma
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-gamma
+              - mediatek,mt8192-disp-gamma
+              - mediatek,mt8195-disp-gamma
+          - const: mediatek,mt8183-disp-gamma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: GAMMA Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gamma@14016000 {
+            compatible = "mediatek,mt8173-disp-gamma";
+            reg = <0 0x14016000 0 0x1000>;
+            interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml
new file mode 100644
index 000000000000..b6fcdfb99ab2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi-ddc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek HDMI DDC Device Tree Bindings
+
+maintainers:
+  - CK Hu <ck.hu@mediatek.com>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  The HDMI DDC i2c controller is used to interface with the HDMI DDC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7623-hdmi-ddc
+      - mediatek,mt8167-hdmi-ddc
+      - mediatek,mt8173-hdmi-ddc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ddc-i2c
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    hdmi_ddc0: i2c@11012000 {
+        compatible = "mediatek,mt8173-hdmi-ddc";
+        reg = <0x11012000 0x1c>;
+        interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&pericfg CLK_PERI_I2C5>;
+        clock-names = "ddc-i2c";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
deleted file mode 100644
index 7b124242b0c5..000000000000
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
+++ /dev/null
@@ -1,148 +0,0 @@
-Mediatek HDMI Encoder
-=====================
-
-The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from
-its parallel input.
-
-Required properties:
-- compatible: Should be "mediatek,<chip>-hdmi".
-- reg: Physical base address and length of the controller's registers
-- interrupts: The interrupt signal from the function block.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "pixel", "pll", "bclk", and "spdif".
-- phys: phandle link to the HDMI PHY node.
-  See Documentation/devicetree/bindings/phy/phy-bindings.txt for details.
-- phy-names: must contain "hdmi"
-- mediatek,syscon-hdmi: phandle link and register offset to the system
-  configuration registers. For mt8173 this must be offset 0x900 into the
-  MMSYS_CONFIG region: <&mmsys 0x900>.
-- ports: A node containing input and output port nodes with endpoint
-  definitions as documented in Documentation/devicetree/bindings/graph.txt.
-- port@0: The input port in the ports node should be connected to a DPI output
-  port.
-- port@1: The output port in the ports node should be connected to the input
-  port of a connector node that contains a ddc-i2c-bus property, or to the
-  input port of an attached bridge chip, such as a SlimPort transmitter.
-
-HDMI CEC
-========
-
-The HDMI CEC controller handles hotplug detection and CEC communication.
-
-Required properties:
-- compatible: Should be "mediatek,<chip>-cec"
-- reg: Physical base address and length of the controller's registers
-- interrupts: The interrupt signal from the function block.
-- clocks: device clock
-
-HDMI DDC
-========
-
-The HDMI DDC i2c controller is used to interface with the HDMI DDC pins.
-The Mediatek's I2C controller is used to interface with I2C devices.
-
-Required properties:
-- compatible: Should be "mediatek,<chip>-hdmi-ddc"
-- reg: Physical base address and length of the controller's registers
-- clocks: device clock
-- clock-names: Should be "ddc-i2c".
-
-HDMI PHY
-========
-
-The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel
-output and drives the HDMI pads.
-
-Required properties:
-- compatible: "mediatek,<chip>-hdmi-phy"
-- reg: Physical base address and length of the module's registers
-- clocks: PLL reference clock
-- clock-names: must contain "pll_ref"
-- clock-output-names: must be "hdmitx_dig_cts" on mt8173
-- #phy-cells: must be <0>
-- #clock-cells: must be <0>
-
-Optional properties:
-- mediatek,ibias: TX DRV bias current for <1.65Gbps, defaults to 0xa
-- mediatek,ibias_up: TX DRV bias current for >1.65Gbps, defaults to 0x1c
-
-Example:
-
-cec: cec@10013000 {
-	compatible = "mediatek,mt8173-cec";
-	reg = <0 0x10013000 0 0xbc>;
-	interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&infracfg CLK_INFRA_CEC>;
-};
-
-hdmi_phy: hdmi-phy@10209100 {
-	compatible = "mediatek,mt8173-hdmi-phy";
-	reg = <0 0x10209100 0 0x24>;
-	clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
-	clock-names = "pll_ref";
-	clock-output-names = "hdmitx_dig_cts";
-	mediatek,ibias = <0xa>;
-	mediatek,ibias_up = <0x1c>;
-	#clock-cells = <0>;
-	#phy-cells = <0>;
-};
-
-hdmi_ddc0: i2c@11012000 {
-	compatible = "mediatek,mt8173-hdmi-ddc";
-	reg = <0 0x11012000 0 0x1c>;
-	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&pericfg CLK_PERI_I2C5>;
-	clock-names = "ddc-i2c";
-};
-
-hdmi0: hdmi@14025000 {
-	compatible = "mediatek,mt8173-hdmi";
-	reg = <0 0x14025000 0 0x400>;
-	interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
-		 <&mmsys CLK_MM_HDMI_PLLCK>,
-		 <&mmsys CLK_MM_HDMI_AUDIO>,
-		 <&mmsys CLK_MM_HDMI_SPDIF>;
-	clock-names = "pixel", "pll", "bclk", "spdif";
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_pin>;
-	phys = <&hdmi_phy>;
-	phy-names = "hdmi";
-	mediatek,syscon-hdmi = <&mmsys 0x900>;
-	assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>;
-	assigned-clock-parents = <&hdmi_phy>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			hdmi0_in: endpoint {
-				remote-endpoint = <&dpi0_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			hdmi0_out: endpoint {
-				remote-endpoint = <&hdmi_con_in>;
-			};
-		};
-	};
-};
-
-connector {
-	compatible = "hdmi-connector";
-	type = "a";
-	ddc-i2c-bus = <&hdmiddc0>;
-
-	port {
-		hdmi_con_in: endpoint {
-			remote-endpoint = <&hdmi0_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
new file mode 100644
index 000000000000..bdaf0b51e68c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek HDMI Encoder Device Tree Bindings
+
+maintainers:
+  - CK Hu <ck.hu@mediatek.com>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from
+  its parallel input.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-hdmi
+      - mediatek,mt7623-hdmi
+      - mediatek,mt8167-hdmi
+      - mediatek,mt8173-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Pixel Clock
+      - description: HDMI PLL
+      - description: Bit Clock
+      - description: S/PDIF Clock
+
+  clock-names:
+    items:
+      - const: pixel
+      - const: pll
+      - const: bclk
+      - const: spdif
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: hdmi
+
+  mediatek,syscon-hdmi:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      - items:
+          - description: phandle to system configuration registers
+          - description: register offset in the system configuration registers
+    description: |
+      phandle link and register offset to the system configuration registers.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Input port node. This port should be connected to a DPI output port.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output port node. This port should be connected to the input port of a connector
+          node that contains a ddc-i2c-bus property, or to the  input port of an attached
+          bridge chip, such as a SlimPort transmitter.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - mediatek,syscon-hdmi
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    hdmi0: hdmi@14025000 {
+        compatible = "mediatek,mt8173-hdmi";
+        reg = <0x14025000 0x400>;
+        interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+             <&mmsys CLK_MM_HDMI_PLLCK>,
+             <&mmsys CLK_MM_HDMI_AUDIO>,
+             <&mmsys CLK_MM_HDMI_SPDIF>;
+        clock-names = "pixel", "pll", "bclk", "spdif";
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_pin>;
+        phys = <&hdmi_phy>;
+        phy-names = "hdmi";
+        mediatek,syscon-hdmi = <&mmsys 0x900>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            hdmi0_in: endpoint {
+              remote-endpoint = <&dpi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            hdmi0_out: endpoint {
+              remote-endpoint = <&hdmi_con_in>;
+            };
+          };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
new file mode 100644
index 000000000000..dd12e2ff685c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MDP RDMA
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  The MediaTek MDP RDMA stands for Read Direct Memory Access.
+  It provides real time data to the back-end panel driver, such as DSI,
+  DPI and DP_INTF.
+  It contains one line buffer to store the sufficient pixel data.
+  RDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-vdo1-rdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RDMA Clock
+
+  iommus:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - iommus
+  - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rdma@1c104000 {
+            compatible = "mediatek,mt8195-vdo1-rdma";
+            reg = <0 0x1c104000 0 0x1000>;
+            interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+            clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+            iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
+            mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
new file mode 100644
index 000000000000..69ba75777dac
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,merge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display merge
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display merge, namely MERGE, is used to merge two slice-per-line
+  inputs into one side-by-side output.
+  MERGE device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8173-disp-merge
+      - items:
+          - const: mediatek,mt8195-disp-merge
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: merge
+      - items:
+          - const: merge
+          - const: merge_async
+
+  mediatek,merge-fifo-en:
+    description:
+      The setting of merge fifo is mainly provided for the display latency
+      buffer to ensure that the back-end panel display data will not be
+      underrun, a little more data is needed in the fifo.
+      According to the merge fifo settings, when the water level is detected
+      to be insufficient, it will trigger RDMA sending ultra and preulra
+      command to SMI to speed up the data rate.
+    type: boolean
+
+  mediatek,merge-mute:
+    description: Support mute function. Mute the content of merge output.
+    type: boolean
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  resets:
+    description: reset controller
+      See Documentation/devicetree/bindings/reset/reset.txt for details.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        merge@14017000 {
+            compatible = "mediatek,mt8173-disp-merge";
+            reg = <0 0x14017000 0 0x1000>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_MERGE>;
+            clock-names = "merge";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
new file mode 100644
index 000000000000..853fcb9db2be
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,od.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overdirve
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overdrive, namely OD, increases the transition values
+  of pixels between consecutive frames to make LCD rotate faster.
+  OD device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt2712-disp-od
+      - items:
+          - const: mediatek,mt8173-disp-od
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: OD Clock
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        od@14023000 {
+            compatible = "mediatek,mt8173-disp-od";
+            reg = <0 0x14023000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_DISP_OD>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
new file mode 100644
index 000000000000..4e94f4e947ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl-2l.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay 2 layer
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overlay 2 layer, namely OVL-2L, provides 2 more layer
+  for OVL.
+  OVL-2L device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8183-disp-ovl-2l
+      - items:
+          - const: mediatek,mt8192-disp-ovl-2l
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ovl-2l
+          - const: mediatek,mt8192-disp-ovl-2l
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: OVL-2L Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ovl_2l0: ovl@14009000 {
+            compatible = "mediatek,mt8183-disp-ovl-2l";
+            reg = <0 0x14009000 0 0x1000>;
+            interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+            iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
new file mode 100644
index 000000000000..a2a27d0ca038
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overlay, namely OVL, can do alpha blending from
+  the memory.
+  OVL device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt2701-disp-ovl
+      - items:
+          - const: mediatek,mt8173-disp-ovl
+      - items:
+          - const: mediatek,mt8183-disp-ovl
+      - items:
+          - const: mediatek,mt8192-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-ovl
+              - mediatek,mt2712-disp-ovl
+          - const: mediatek,mt2701-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt8195-disp-ovl
+          - const: mediatek,mt8183-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ovl
+          - const: mediatek,mt8192-disp-ovl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: OVL Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ovl0: ovl@1400c000 {
+            compatible = "mediatek,mt8173-disp-ovl";
+            reg = <0 0x1400c000 0 0x1000>;
+            interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_OVL0>;
+            iommus = <&iommu M4U_PORT_DISP_OVL0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
new file mode 100644
index 000000000000..654080bfbdfb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,postmask.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display postmask
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display postmask, namely POSTMASK, provides round corner pattern
+  generation.
+  POSTMASK device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8192-disp-postmask
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-postmask
+          - const: mediatek,mt8192-disp-postmask
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: POSTMASK Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/power/mt8192-power.h>
+    #include <dt-bindings/gce/mt8192-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        postmask0: postmask@1400d000 {
+            compatible = "mediatek,mt8192-disp-postmask";
+            reg = <0 0x1400d000 0 0x1000>;
+            interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>;
+            power-domains = <&scpsys MT8192_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
new file mode 100644
index 000000000000..0882ae86e6c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Read Direct Memory Access
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek Read Direct Memory Access(RDMA) component used to read the
+  data into DMA. It provides real time data to the back-end panel
+  driver, such as DSI, DPI and DP_INTF.
+  It contains one line buffer to store the sufficient pixel data.
+  RDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt2701-disp-rdma
+      - items:
+          - const: mediatek,mt8173-disp-rdma
+      - items:
+          - const: mediatek,mt8183-disp-rdma
+      - items:
+          - const: mediatek,mt8195-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-rdma
+              - mediatek,mt2712-disp-rdma
+          - const: mediatek,mt2701-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-rdma
+              - mediatek,mt8192-disp-rdma
+          - const: mediatek,mt8183-disp-rdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: RDMA Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,rdma-fifo-size:
+    description:
+      rdma fifo size may be different even in same SOC, add this property to the
+      corresponding rdma.
+      The value below is the Max value which defined in hardware data sheet
+      mediatek,rdma-fifo-size of mt8173-rdma0 is 8K
+      mediatek,rdma-fifo-size of mt8183-rdma0 is 5K
+      mediatek,rdma-fifo-size of mt8183-rdma1 is 2K
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8192, 5120, 2048]
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rdma0: rdma@1400e000 {
+            compatible = "mediatek,mt8173-disp-rdma";
+            reg = <0 0x1400e000 0 0x1000>;
+            interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+            iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+            mediatek,rdma-fifo-size = <8192>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
new file mode 100644
index 000000000000..35ace1f322e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,split.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display split
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display split, namely SPLIT, is used to split stream to two
+  encoders.
+  SPLIT device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8173-disp-split
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: SPLIT Clock
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        split0: split@14018000 {
+            compatible = "mediatek,mt8173-disp-split";
+            reg = <0 0x14018000 0 0x1000>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
new file mode 100644
index 000000000000..b8bb135fe96b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ufoe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display UFOe
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display UFOe stands for Unified Frame Optimization engine.
+  UFOe can cut the data rate for DSI port which may lead to reduce power
+  consumption.
+  UFOe device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8173-disp-ufoe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: UFOe Clock
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufoe@1401a000 {
+            compatible = "mediatek,mt8173-disp-ufoe";
+            reg = <0 0x1401a000 0 0x1000>;
+            interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_UFOE>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
new file mode 100644
index 000000000000..7d7cc1ab526b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,wdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Write Direct Memory Access
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek Write Direct Memory Access(WDMA) component used to write
+  the data into DMA.
+  WDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8173-disp-wdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: WDMA Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        wdma0: wdma@14011000 {
+            compatible = "mediatek,mt8173-disp-wdma";
+            reg = <0 0x14011000 0 0x1000>;
+            interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+            iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
new file mode 100644
index 000000000000..f2515af8256f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dp-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MSM Display Port Controller
+
+maintainers:
+  - Kuogee Hsieh <quic_khsieh@quicinc.com>
+
+description: |
+  Device tree bindings for DisplayPort host controller for MSM targets
+  that are compatible with VESA DisplayPort interface specification.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-dp
+      - qcom,sc7280-dp
+      - qcom,sc7280-edp
+      - qcom,sc8180x-dp
+      - qcom,sc8180x-edp
+      - qcom,sm8350-dp
+
+  reg:
+    minItems: 4
+    items:
+      - description: ahb register block
+      - description: aux register block
+      - description: link register block
+      - description: p0 register block
+      - description: p1 register block
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AHB clock to enable register access
+      - description: Display Port AUX clock
+      - description: Display Port Link clock
+      - description: Link interface clock between DP and PHY
+      - description: Display Port Pixel clock
+
+  clock-names:
+    items:
+      - const: core_iface
+      - const: core_aux
+      - const: ctrl_link
+      - const: ctrl_link_iface
+      - const: stream_pixel
+
+  assigned-clocks:
+    items:
+      - description: link clock source
+      - description: pixel clock source
+
+  assigned-clock-parents:
+    items:
+      - description: phy 0 parent
+      - description: phy 1 parent
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: dp
+
+  operating-points-v2:
+    maxItems: 1
+
+  opp-table: true
+
+  power-domains:
+    maxItems: 1
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      maximum: 3
+
+  "#sound-dai-cells":
+    const: 0
+
+  vdda-0p9-supply:
+    deprecated: true
+  vdda-1p2-supply:
+    deprecated: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the controller
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the controller
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - power-domains
+  - ports
+
+allOf:
+  # AUX BUS does not exist on DP controllers
+  # Audio output also is present only on DP output
+  # p1 regions is present on DP, but not on eDP
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-edp
+              - qcom,sc8180x-edp
+    then:
+      properties:
+        "#sound-dai-cells": false
+        reg:
+          maxItems: 4
+    else:
+      properties:
+        aux-bus: false
+        reg:
+          minItems: 5
+      required:
+        - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    displayport-controller@ae90000 {
+        compatible = "qcom,sc7180-dp";
+        reg = <0xae90000 0x200>,
+              <0xae90200 0x200>,
+              <0xae90400 0xc00>,
+              <0xae91000 0x400>,
+              <0xae91400 0x400>;
+        interrupt-parent = <&mdss>;
+        interrupts = <12>;
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+        clock-names = "core_iface", "core_aux",
+                      "ctrl_link",
+                      "ctrl_link_iface", "stream_pixel";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+                          <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+
+        assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+
+        phys = <&dp_phy>;
+        phy-names = "dp";
+
+        #sound-dai-cells = <0>;
+
+        power-domains = <&rpmhpd SC7180_CX>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dpu_intf0_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&typec>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
new file mode 100644
index 000000000000..253665c693e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for MSM8998 target
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS and DPU are mentioned for MSM8998 target.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,msm8998-mdss
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+
+  ranges: true
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    description: Node containing the properties of DPU.
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,msm8998-dpu
+
+      reg:
+        items:
+          - description: Address offset and size for mdp register set
+          - description: Address offset and size for regdma register set
+          - description: Address offset and size for vbif register set
+          - description: Address offset and size for non-realtime vbif register set
+
+      reg-names:
+        items:
+          - const: mdp
+          - const: regdma
+          - const: vbif
+          - const: vbif_nrt
+
+      clocks:
+        items:
+          - description: Display ahb clock
+          - description: Display axi clock
+          - description: Display mem-noc clock
+          - description: Display core clock
+          - description: Display vsync clock
+
+      clock-names:
+        items:
+          - const: iface
+          - const: bus
+          - const: mnoc
+          - const: core
+          - const: vsync
+
+      interrupts:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      operating-points-v2: true
+      opp-table:
+        type: object
+
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+        description: |
+          Contains the list of output ports from DPU device. These ports
+          connect to interfaces that are external to the DPU hardware,
+          such as DSI, DP etc. Each output port contains an endpoint that
+          describes how it is connected to an external interface.
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF1 (DSI1)
+
+          port@1:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF2 (DSI2)
+
+        required:
+          - port@0
+          - port@1
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - clocks
+      - interrupts
+      - power-domains
+      - operating-points-v2
+      - ports
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    mdss: display-subsystem@c900000 {
+        compatible = "qcom,msm8998-mdss";
+        reg = <0x0c900000 0x1000>;
+        reg-names = "mdss";
+
+        clocks = <&mmcc MDSS_AHB_CLK>,
+                 <&mmcc MDSS_AXI_CLK>,
+                 <&mmcc MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        #address-cells = <1>;
+        #interrupt-cells = <1>;
+        #size-cells = <1>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        iommus = <&mmss_smmu 0>;
+
+        power-domains = <&mmcc MDSS_GDSC>;
+        ranges;
+
+        display-controller@c901000 {
+            compatible = "qcom,msm8998-dpu";
+            reg = <0x0c901000 0x8f000>,
+                  <0x0c9a8e00 0xf0>,
+                  <0x0c9b0000 0x2008>,
+                  <0x0c9b8000 0x1040>;
+            reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>,
+                     <&mmcc MNOC_AHB_CLK>,
+                     <&mmcc MDSS_MDP_CLK>,
+                     <&mmcc MDSS_VSYNC_CLK>;
+            clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDMX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
new file mode 100644
index 000000000000..c5824e1d2382
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
@@ -0,0 +1,222 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-qcm2290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for QCM2290 target
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+  and DPU are mentioned for QCM2290 target.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,qcm2290-mdss
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
+
+  ranges: true
+
+  interconnects:
+    items:
+      - description: Interconnect path specifying the port ids for data bus
+
+  interconnect-names:
+    const: mdp0-mem
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    description: Node containing the properties of DPU.
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,qcm2290-dpu
+
+      reg:
+        items:
+          - description: Address offset and size for mdp register set
+          - description: Address offset and size for vbif register set
+
+      reg-names:
+        items:
+          - const: mdp
+          - const: vbif
+
+      clocks:
+        items:
+          - description: Display AXI clock from gcc
+          - description: Display AHB clock from dispcc
+          - description: Display core clock from dispcc
+          - description: Display lut clock from dispcc
+          - description: Display vsync clock from dispcc
+
+      clock-names:
+        items:
+          - const: bus
+          - const: iface
+          - const: core
+          - const: lut
+          - const: vsync
+
+      interrupts:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      operating-points-v2: true
+      opp-table:
+        type: object
+
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+        description: |
+          Contains the list of output ports from DPU device. These ports
+          connect to interfaces that are external to the DPU hardware,
+          such as DSI. Each output port contains an endpoint that
+          describes how it is connected to an external interface.
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF1 (DSI1)
+
+        required:
+          - port@0
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - clocks
+      - interrupts
+      - power-domains
+      - operating-points-v2
+      - ports
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,qcm2290.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    mdss: mdss@5e00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,qcm2290-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
+        interconnect-names = "mdp0-mem";
+
+        iommus = <&apps_smmu 0x420 0x2>,
+                 <&apps_smmu 0x421 0x0>;
+        ranges;
+
+        mdss_mdp: display-controller@5e01000 {
+                compatible = "qcom,qcm2290-dpu";
+                reg = <0x05e01000 0x8f000>,
+                      <0x05eb0000 0x2008>;
+                reg-names = "mdp", "vbif";
+
+                clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                         <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                         <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                         <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                         <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+                clock-names = "bus", "iface", "core", "lut", "vsync";
+
+                operating-points-v2 = <&mdp_opp_table>;
+                power-domains = <&rpmpd QCM2290_VDDCX>;
+
+                interrupt-parent = <&mdss>;
+                interrupts = <0>;
+
+                ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                                reg = <0>;
+                                dpu_intf1_out: endpoint {
+                                        remote-endpoint = <&dsi0_in>;
+                                };
+                        };
+                };
+         };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
new file mode 100644
index 000000000000..4890bc25f3fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
@@ -0,0 +1,235 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for SC7180 target
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS and DPU are mentioned for SC7180 target.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sc7180-mdss
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+
+  ranges: true
+
+  interconnects:
+    items:
+      - description: Interconnect path specifying the port ids for data bus
+
+  interconnect-names:
+    const: mdp0-mem
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    description: Node containing the properties of DPU.
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sc7180-dpu
+
+      reg:
+        items:
+          - description: Address offset and size for mdp register set
+          - description: Address offset and size for vbif register set
+
+      reg-names:
+        items:
+          - const: mdp
+          - const: vbif
+
+      clocks:
+        items:
+          - description: Display hf axi clock
+          - description: Display ahb clock
+          - description: Display rotator clock
+          - description: Display lut clock
+          - description: Display core clock
+          - description: Display vsync clock
+
+      clock-names:
+        items:
+          - const: bus
+          - const: iface
+          - const: rot
+          - const: lut
+          - const: core
+          - const: vsync
+
+      interrupts:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      operating-points-v2: true
+      opp-table:
+        type: object
+
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+        description: |
+          Contains the list of output ports from DPU device. These ports
+          connect to interfaces that are external to the DPU hardware,
+          such as DSI, DP etc. Each output port contains an endpoint that
+          describes how it is connected to an external interface.
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF1 (DSI1)
+
+          port@2:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF0 (DP)
+
+        required:
+          - port@0
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - clocks
+      - interrupts
+      - power-domains
+      - operating-points-v2
+      - ports
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+         #address-cells = <1>;
+         #size-cells = <1>;
+         compatible = "qcom,sc7180-mdss";
+         reg = <0xae00000 0x1000>;
+         reg-names = "mdss";
+         power-domains = <&dispcc MDSS_GDSC>;
+         clocks = <&gcc GCC_DISP_AHB_CLK>,
+                  <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
+         clock-names = "iface", "ahb", "core";
+
+         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+         interrupt-controller;
+         #interrupt-cells = <1>;
+
+         interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+         interconnect-names = "mdp0-mem";
+
+         iommus = <&apps_smmu 0x800 0x2>;
+         ranges;
+
+         display-controller@ae01000 {
+                   compatible = "qcom,sc7180-dpu";
+                   reg = <0x0ae01000 0x8f000>,
+                         <0x0aeb0000 0x2008>;
+
+                   reg-names = "mdp", "vbif";
+
+                   clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                            <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                            <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                            <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                            <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                            <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+                   clock-names = "bus", "iface", "rot", "lut", "core",
+                                 "vsync";
+
+                   interrupt-parent = <&mdss>;
+                   interrupts = <0>;
+                   power-domains = <&rpmhpd SC7180_CX>;
+                   operating-points-v2 = <&mdp_opp_table>;
+
+                   ports {
+                           #address-cells = <1>;
+                           #size-cells = <0>;
+
+                           port@0 {
+                                   reg = <0>;
+                                   dpu_intf1_out: endpoint {
+                                                  remote-endpoint = <&dsi0_in>;
+                                   };
+                           };
+
+                            port@2 {
+                                    reg = <2>;
+                                    dpu_intf0_out: endpoint {
+                                                   remote-endpoint = <&dp_in>;
+                                    };
+                            };
+                   };
+         };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
new file mode 100644
index 000000000000..584d646021d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
@@ -0,0 +1,239 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-sc7280.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for SC7280
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS and DPU are mentioned for SC7280.
+
+properties:
+  compatible:
+    const: qcom,sc7280-mdss
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+
+  ranges: true
+
+  interconnects:
+    items:
+      - description: Interconnect path specifying the port ids for data bus
+
+  interconnect-names:
+    const: mdp0-mem
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    description: Node containing the properties of DPU.
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: qcom,sc7280-dpu
+
+      reg:
+        items:
+          - description: Address offset and size for mdp register set
+          - description: Address offset and size for vbif register set
+
+      reg-names:
+        items:
+          - const: mdp
+          - const: vbif
+
+      clocks:
+        items:
+          - description: Display hf axi clock
+          - description: Display sf axi clock
+          - description: Display ahb clock
+          - description: Display lut clock
+          - description: Display core clock
+          - description: Display vsync clock
+
+      clock-names:
+        items:
+          - const: bus
+          - const: nrt_bus
+          - const: iface
+          - const: lut
+          - const: core
+          - const: vsync
+
+      interrupts:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      operating-points-v2: true
+      opp-table:
+        type: object
+
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+        description: |
+          Contains the list of output ports from DPU device. These ports
+          connect to interfaces that are external to the DPU hardware,
+          such as DSI, DP etc. Each output port contains an endpoint that
+          describes how it is connected to an external interface.
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF1 (DSI)
+
+          port@1:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF5 (EDP)
+
+        required:
+          - port@0
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - clocks
+      - interrupts
+      - power-domains
+      - operating-points-v2
+      - ports
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc7280.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+         #address-cells = <1>;
+         #size-cells = <1>;
+         compatible = "qcom,sc7280-mdss";
+         reg = <0xae00000 0x1000>;
+         reg-names = "mdss";
+         power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+         clocks = <&gcc GCC_DISP_AHB_CLK>,
+                  <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
+         clock-names = "iface",
+                       "ahb",
+                       "core";
+
+         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+         interrupt-controller;
+         #interrupt-cells = <1>;
+
+         interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+         interconnect-names = "mdp0-mem";
+
+         iommus = <&apps_smmu 0x900 0x402>;
+         ranges;
+
+         display-controller@ae01000 {
+                   compatible = "qcom,sc7280-dpu";
+                   reg = <0x0ae01000 0x8f000>,
+                         <0x0aeb0000 0x2008>;
+
+                   reg-names = "mdp", "vbif";
+
+                   clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                            <&gcc GCC_DISP_SF_AXI_CLK>,
+                            <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                            <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                            <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                            <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+                   clock-names = "bus",
+                                 "nrt_bus",
+                                 "iface",
+                                 "lut",
+                                 "core",
+                                 "vsync";
+
+                   interrupt-parent = <&mdss>;
+                   interrupts = <0>;
+                   power-domains = <&rpmhpd SC7280_CX>;
+                   operating-points-v2 = <&mdp_opp_table>;
+
+                   ports {
+                           #address-cells = <1>;
+                           #size-cells = <0>;
+
+                           port@0 {
+                                   reg = <0>;
+                                   dpu_intf1_out: endpoint {
+                                           remote-endpoint = <&dsi0_in>;
+                                   };
+                           };
+
+                           port@1 {
+                                   reg = <1>;
+                                   dpu_intf5_out: endpoint {
+                                           remote-endpoint = <&edp_in>;
+                                   };
+                           };
+                   };
+         };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
new file mode 100644
index 000000000000..7d1037373175
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for SDM845 target
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS and DPU are mentioned for SDM845 target.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sdm845-mdss
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
+
+  ranges: true
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    description: Node containing the properties of DPU.
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sdm845-dpu
+
+      reg:
+        items:
+          - description: Address offset and size for mdp register set
+          - description: Address offset and size for vbif register set
+
+      reg-names:
+        items:
+          - const: mdp
+          - const: vbif
+
+      clocks:
+        items:
+          - description: Display ahb clock
+          - description: Display axi clock
+          - description: Display core clock
+          - description: Display vsync clock
+
+      clock-names:
+        items:
+          - const: iface
+          - const: bus
+          - const: core
+          - const: vsync
+
+      interrupts:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      operating-points-v2: true
+      opp-table:
+        type: object
+
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+        description: |
+          Contains the list of output ports from DPU device. These ports
+          connect to interfaces that are external to the DPU hardware,
+          such as DSI, DP etc. Each output port contains an endpoint that
+          describes how it is connected to an external interface.
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF1 (DSI1)
+
+          port@1:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF2 (DSI2)
+
+        required:
+          - port@0
+          - port@1
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - clocks
+      - interrupts
+      - power-domains
+      - operating-points-v2
+      - ports
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+          #address-cells = <1>;
+          #size-cells = <1>;
+          compatible = "qcom,sdm845-mdss";
+          reg = <0x0ae00000 0x1000>;
+          reg-names = "mdss";
+          power-domains = <&dispcc MDSS_GDSC>;
+
+          clocks = <&gcc GCC_DISP_AHB_CLK>,
+                   <&dispcc DISP_CC_MDSS_MDP_CLK>;
+          clock-names = "iface", "core";
+
+          interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-controller;
+          #interrupt-cells = <1>;
+
+          iommus = <&apps_smmu 0x880 0x8>,
+                   <&apps_smmu 0xc80 0x8>;
+          ranges;
+
+          display-controller@ae01000 {
+                    compatible = "qcom,sdm845-dpu";
+                    reg = <0x0ae01000 0x8f000>,
+                          <0x0aeb0000 0x2008>;
+                    reg-names = "mdp", "vbif";
+
+                    clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                             <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                             <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                             <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+                    clock-names = "iface", "bus", "core", "vsync";
+
+                    interrupt-parent = <&mdss>;
+                    interrupts = <0>;
+                    power-domains = <&rpmhpd SDM845_CX>;
+                    operating-points-v2 = <&mdp_opp_table>;
+
+                    ports {
+                           #address-cells = <1>;
+                           #size-cells = <0>;
+
+                           port@0 {
+                                   reg = <0>;
+                                   dpu_intf1_out: endpoint {
+                                                  remote-endpoint = <&dsi0_in>;
+                                   };
+                           };
+
+                           port@1 {
+                                   reg = <1>;
+                                   dpu_intf2_out: endpoint {
+                                                  remote-endpoint = <&dsi1_in>;
+                                   };
+                           };
+                    };
+          };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
deleted file mode 100644
index 551ae26f60da..000000000000
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ /dev/null
@@ -1,141 +0,0 @@
-Qualcomm Technologies, Inc. DPU KMS
-
-Description:
-
-Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates
-sub-blocks like DPU display controller, DSI and DP interfaces etc.
-The DPU display controller is found in SDM845 SoC.
-
-MDSS:
-Required properties:
-- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
-- reg: physical base address and length of contoller's registers.
-- reg-names: register region names. The following region is required:
-  * "mdss"
-- power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
-- clocks: list of clock specifiers for clocks needed by the device.
-- clock-names: device clock names, must be in same order as clocks property.
-  The following clocks are required:
-  * "iface"
-  * "bus"
-  * "core"
-- interrupts: interrupt signal from MDSS.
-- interrupt-controller: identifies the node as an interrupt controller.
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- iommus: phandle of iommu device node.
-- #address-cells: number of address cells for the MDSS children. Should be 1.
-- #size-cells: Should be 1.
-- ranges: parent bus address space is the same as the child bus address space.
-- interconnects : interconnect path specifier for MDSS according to
-  Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be
-  2 paths corresponding to 2 AXI ports.
-- interconnect-names : MDSS will have 2 port names to differentiate between the
-  2 interconnect paths defined with interconnect specifier.
-
-Optional properties:
-- assigned-clocks: list of clock specifiers for clocks needing rate assignment
-- assigned-clock-rates: list of clock frequencies sorted in the same order as
-  the assigned-clocks property.
-
-MDP:
-Required properties:
-- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
-- reg: physical base address and length of controller's registers.
-- reg-names : register region names. The following region is required:
-  * "mdp"
-  * "vbif"
-- clocks: list of clock specifiers for clocks needed by the device.
-- clock-names: device clock names, must be in same order as clocks property.
-  The following clocks are required.
-  * "bus"
-  * "iface"
-  * "core"
-  * "vsync"
-- interrupts: interrupt line from DPU to MDSS.
-- ports: contains the list of output ports from DPU device. These ports connect
-  to interfaces that are external to the DPU hardware, such as DSI, DP etc.
-
-  Each output port contains an endpoint that describes how it is connected to an
-  external interface. These are described by the standard properties documented
-  here:
-	Documentation/devicetree/bindings/graph.txt
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-	Port 0 -> DPU_INTF1 (DSI1)
-	Port 1 -> DPU_INTF2 (DSI2)
-
-Optional properties:
-- assigned-clocks: list of clock specifiers for clocks needing rate assignment
-- assigned-clock-rates: list of clock frequencies sorted in the same order as
-  the assigned-clocks property.
-
-Example:
-
-	mdss: mdss@ae00000 {
-		compatible = "qcom,sdm845-mdss";
-		reg = <0xae00000 0x1000>;
-		reg-names = "mdss";
-
-		power-domains = <&clock_dispcc 0>;
-
-		clocks = <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_AXI_CLK>,
-			 <&clock_dispcc DISP_CC_MDSS_MDP_CLK>;
-		clock-names = "iface", "bus", "core";
-
-		assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>;
-		assigned-clock-rates = <300000000>;
-
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		interconnects = <&rsc_hlos MASTER_MDP0 &rsc_hlos SLAVE_EBI1>,
-				<&rsc_hlos MASTER_MDP1 &rsc_hlos SLAVE_EBI1>;
-
-		interconnect-names = "mdp0-mem", "mdp1-mem";
-
-		iommus = <&apps_iommu 0>;
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xae00000 0xb2008>;
-
-		mdss_mdp: mdp@ae01000 {
-			compatible = "qcom,sdm845-dpu";
-			reg = <0 0x1000 0x8f000>, <0 0xb0000 0x2008>;
-			reg-names = "mdp", "vbif";
-
-			clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>,
-				 <&clock_dispcc DISP_CC_MDSS_AXI_CLK>,
-				 <&clock_dispcc DISP_CC_MDSS_MDP_CLK>,
-				 <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>;
-			clock-names = "iface", "bus", "core", "vsync";
-
-			assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>,
-					  <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>;
-			assigned-clock-rates = <0 0 300000000 19200000>;
-
-			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					dpu_intf1_out: endpoint {
-						remote-endpoint = <&dsi0_in>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					dpu_intf2_out: endpoint {
-						remote-endpoint = <&dsi1_in>;
-					};
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
new file mode 100644
index 000000000000..3b609c19e0bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -0,0 +1,203 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI controller
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+allOf:
+  - $ref: "../dsi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - qcom,mdss-dsi-ctrl
+      - qcom,dsi-ctrl-6g-qcm2290
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: dsi_ctrl
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display byte clock
+      - description: Display byte interface clock
+      - description: Display pixel clock
+      - description: Display escape clock
+      - description: Display AHB clock
+      - description: Display AXI clock
+
+  clock-names:
+    items:
+      - const: byte
+      - const: byte_intf
+      - const: pixel
+      - const: core
+      - const: iface
+      - const: bus
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dsi
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  syscon-sfpb:
+    description: A phandle to mmss_sfpb syscon node (only for DSIv2).
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  qcom,dual-dsi-mode:
+    type: boolean
+    description: |
+      Indicates if the DSI controller is driving a panel which needs
+      2 DSI links.
+
+  assigned-clocks:
+    maxItems: 2
+    description: |
+      Parents of "byte" and "pixel" for the given platform.
+
+  assigned-clock-parents:
+    maxItems: 2
+    description: |
+      The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block.
+
+  power-domains:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  ports:
+    $ref: "/schemas/graph.yaml#/properties/ports"
+    description: |
+      Contains DSI controller input and output ports as children, each
+      containing one endpoint subnode.
+
+    properties:
+      port@0:
+        $ref: "/schemas/graph.yaml#/$defs/port-base"
+        unevaluatedProperties: false
+        description: |
+          Input endpoints of the controller.
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                maxItems: 4
+                minItems: 4
+                items:
+                  enum: [ 0, 1, 2, 3 ]
+
+      port@1:
+        $ref: "/schemas/graph.yaml#/$defs/port-base"
+        unevaluatedProperties: false
+        description: |
+          Output endpoints of the controller.
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                maxItems: 4
+                minItems: 4
+                items:
+                  enum: [ 0, 1, 2, 3 ]
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - assigned-clocks
+  - assigned-clock-parents
+  - power-domains
+  - operating-points-v2
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+     #include <dt-bindings/power/qcom-rpmpd.h>
+
+     dsi@ae94000 {
+           compatible = "qcom,mdss-dsi-ctrl";
+           reg = <0x0ae94000 0x400>;
+           reg-names = "dsi_ctrl";
+
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           interrupt-parent = <&mdss>;
+           interrupts = <4>;
+
+           clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                    <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                    <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                    <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                    <&dispcc DISP_CC_MDSS_AXI_CLK>;
+           clock-names = "byte",
+                         "byte_intf",
+                         "pixel",
+                         "core",
+                         "iface",
+                         "bus";
+
+           phys = <&dsi0_phy>;
+           phy-names = "dsi";
+
+           assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+           assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+
+           power-domains = <&rpmhpd SC7180_CX>;
+           operating-points-v2 = <&dsi_opp_table>;
+
+           ports {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+
+                  port@0 {
+                          reg = <0>;
+                          dsi0_in: endpoint {
+                                   remote-endpoint = <&dpu_intf1_out>;
+                          };
+                  };
+
+                  port@1 {
+                          reg = <1>;
+                          dsi0_out: endpoint {
+                                   remote-endpoint = <&sn65dsi86_in>;
+                                   data-lanes = <0 1 2 3>;
+                          };
+                  };
+           };
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
new file mode 100644
index 000000000000..d9ad8b659f58
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-10nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 10nm PHY
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,dsi-phy-10nm
+      - qcom,dsi-phy-10nm-8998
+
+  reg:
+    items:
+      - description: dsi phy register set
+      - description: dsi phy lane register set
+      - description: dsi pll register set
+
+  reg-names:
+    items:
+      - const: dsi_phy
+      - const: dsi_phy_lane
+      - const: dsi_pll
+
+  vdds-supply:
+    description: |
+      Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and
+      connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target
+
+  qcom,phy-rescode-offset-top:
+    $ref: /schemas/types.yaml#/definitions/int8-array
+    maxItems: 5
+    description:
+      Integer array of offset for pull-up legs rescode for all five lanes.
+      To offset the drive strength from the calibrated value in an increasing
+      manner, -32 is the weakest and +31 is the strongest.
+    items:
+      minimum: -32
+      maximum: 31
+
+  qcom,phy-rescode-offset-bot:
+    $ref: /schemas/types.yaml#/definitions/int8-array
+    maxItems: 5
+    description:
+      Integer array of offset for pull-down legs rescode for all five lanes.
+      To offset the drive strength from the calibrated value in a decreasing
+      manner, -32 is the weakest and +31 is the strongest.
+    items:
+      minimum: -32
+      maximum: 31
+
+  qcom,phy-drive-ldo-level:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description:
+      The PHY LDO has an amplitude tuning feature to adjust the LDO output
+      for the HSTX drive. Use supported levels (mV) to offset the drive level
+      from the default value.
+    enum: [ 375, 400, 425, 450, 475, 500 ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vdds-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@ae94400 {
+         compatible = "qcom,dsi-phy-10nm";
+         reg = <0x0ae94400 0x200>,
+               <0x0ae94600 0x280>,
+               <0x0ae94a00 0x1e0>;
+         reg-names = "dsi_phy",
+                     "dsi_phy_lane",
+                     "dsi_pll";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vdds-supply = <&vdda_mipi_dsi0_pll>;
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+
+         qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>;
+         qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>;
+         qcom,phy-drive-ldo-level = <400>;
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
new file mode 100644
index 000000000000..1342d74ecfe0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-14nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 14nm PHY
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,dsi-phy-14nm
+      - qcom,dsi-phy-14nm-660
+      - qcom,dsi-phy-14nm-8953
+
+  reg:
+    items:
+      - description: dsi phy register set
+      - description: dsi phy lane register set
+      - description: dsi pll register set
+
+  reg-names:
+    items:
+      - const: dsi_phy
+      - const: dsi_phy_lane
+      - const: dsi_pll
+
+  vcca-supply:
+    description: Phandle to vcca regulator device node.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vcca-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@ae94400 {
+         compatible = "qcom,dsi-phy-14nm";
+         reg = <0x0ae94400 0x200>,
+               <0x0ae94600 0x280>,
+               <0x0ae94a00 0x1e0>;
+         reg-names = "dsi_phy",
+                     "dsi_phy_lane",
+                     "dsi_pll";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vcca-supply = <&vcca_reg>;
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
new file mode 100644
index 000000000000..9c1f9140c731
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-20nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 20nm PHY
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,dsi-phy-20nm
+
+  reg:
+    items:
+      - description: dsi pll register set
+      - description: dsi phy register set
+      - description: dsi phy regulator register set
+
+  reg-names:
+    items:
+      - const: dsi_pll
+      - const: dsi_phy
+      - const: dsi_phy_regulator
+
+  vcca-supply:
+    description: Phandle to vcca regulator device node.
+
+  vddio-supply:
+    description: Phandle to vdd-io regulator device node.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vddio-supply
+  - vcca-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@fd922a00 {
+         compatible = "qcom,dsi-phy-20nm";
+         reg = <0xfd922a00 0xd4>,
+               <0xfd922b00 0x2b0>,
+               <0xfd922d80 0x7b>;
+         reg-names = "dsi_pll",
+                     "dsi_phy",
+                     "dsi_phy_regulator";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vcca-supply = <&vcca_reg>;
+         vddio-supply = <&vddio_reg>;
+
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
new file mode 100644
index 000000000000..3d8540a06fe2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-28nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 28nm PHY
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,dsi-phy-28nm-hpm
+      - qcom,dsi-phy-28nm-lp
+      - qcom,dsi-phy-28nm-8960
+
+  reg:
+    items:
+      - description: dsi pll register set
+      - description: dsi phy register set
+      - description: dsi phy regulator register set
+
+  reg-names:
+    items:
+      - const: dsi_pll
+      - const: dsi_phy
+      - const: dsi_phy_regulator
+
+  vddio-supply:
+    description: Phandle to vdd-io regulator device node.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vddio-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@fd922a00 {
+         compatible = "qcom,dsi-phy-28nm-lp";
+         reg = <0xfd922a00 0xd4>,
+               <0xfd922b00 0x2b0>,
+               <0xfd922d80 0x7b>;
+         reg-names = "dsi_pll",
+                     "dsi_phy",
+                     "dsi_phy_regulator";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vddio-supply = <&vddio_reg>;
+
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
new file mode 100644
index 000000000000..c851770bbdf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-7nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 7nm PHY
+
+maintainers:
+  - Jonathan Marek <jonathan@marek.ca>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,dsi-phy-7nm
+      - qcom,dsi-phy-7nm-8150
+      - qcom,sc7280-dsi-phy-7nm
+
+  reg:
+    items:
+      - description: dsi phy register set
+      - description: dsi phy lane register set
+      - description: dsi pll register set
+
+  reg-names:
+    items:
+      - const: dsi_phy
+      - const: dsi_phy_lane
+      - const: dsi_pll
+
+  vdds-supply:
+    description: |
+      Connected to VDD_A_DSI_PLL_0P9 pin (or VDDA_DSI{0,1}_PLL_0P9 for sm8150)
+
+  phy-type:
+    description: D-PHY (default) or C-PHY mode
+    enum: [ 10, 11 ]
+    default: 10
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vdds-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@ae94400 {
+         compatible = "qcom,dsi-phy-7nm";
+         reg = <0x0ae94400 0x200>,
+               <0x0ae94600 0x280>,
+               <0x0ae94900 0x260>;
+         reg-names = "dsi_phy",
+                     "dsi_phy_lane",
+                     "dsi_pll";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vdds-supply = <&vreg_l5a_0p88>;
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
new file mode 100644
index 000000000000..76d40f7933dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Description of Qualcomm Display DSI PHY common dt properties
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description: |
+  This defines the DSI PHY dt properties which are common for all
+  dsi phy versions.
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ref
+
+required:
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#phy-cells"
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
deleted file mode 100644
index af95586c898f..000000000000
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ /dev/null
@@ -1,246 +0,0 @@
-Qualcomm Technologies Inc. adreno/snapdragon DSI output
-
-DSI Controller:
-Required properties:
-- compatible:
-  * "qcom,mdss-dsi-ctrl"
-- reg: Physical base address and length of the registers of controller
-- reg-names: The names of register regions. The following regions are required:
-  * "dsi_ctrl"
-- interrupts: The interrupt signal from the DSI block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: Phandles to device clocks.
-- clock-names: the following clocks are required:
-  * "mdp_core"
-  * "iface"
-  * "bus"
-  * "core_mmss"
-  * "byte"
-  * "pixel"
-  * "core"
-  For DSIv2, we need an additional clock:
-   * "src"
-  For DSI6G v2.0 onwards, we need also need the clock:
-   * "byte_intf"
-- assigned-clocks: Parents of "byte" and "pixel" for the given platform.
-- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
-  by a DSI PHY block. See [1] for details on clock bindings.
-- vdd-supply: phandle to vdd regulator device node
-- vddio-supply: phandle to vdd-io regulator device node
-- vdda-supply: phandle to vdda regulator device node
-- phys: phandle to DSI PHY device node
-- phy-names: the name of the corresponding PHY device
-- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
-- ports: Contains 2 DSI controller ports as child nodes. Each port contains
-  an endpoint subnode as defined in [2] and [3].
-
-Optional properties:
-- panel@0: Node of panel connected to this DSI controller.
-  See files in [4] for each supported panel.
-- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
-  driving a panel which needs 2 DSI links.
-- qcom,master-dsi: Boolean value indicating if the DSI controller is driving
-  the master link of the 2-DSI panel.
-- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is
-  driving a 2-DSI panel whose 2 links need receive command simultaneously.
-- pinctrl-names: the pin control state names; should contain "default"
-- pinctrl-0: the default pinctrl state (active)
-- pinctrl-n: the "sleep" pinctrl state
-- ports: contains DSI controller input and output ports as children, each
-  containing one endpoint subnode.
-
-  DSI Endpoint properties:
-  - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
-    input endpoint. For port@1, set to the MDP interface output. See [2] for
-    device graph info.
-
-  - data-lanes: this describes how the physical DSI data lanes are mapped
-    to the logical lanes on the given platform. The value contained in
-    index n describes what physical lane is mapped to the logical lane n
-    (DATAn, where n lies between 0 and 3). The clock lane position is fixed
-    and can't be changed. Hence, they aren't a part of the DT bindings. See
-    [3] for more info on the data-lanes property.
-
-    For example:
-
-    data-lanes = <3 0 1 2>;
-
-    The above mapping describes that the logical data lane DATA0 is mapped to
-    the physical data lane DATA3, logical DATA1 to physical DATA0, logic DATA2
-    to phys DATA1 and logic DATA3 to phys DATA2.
-
-    There are only a limited number of physical to logical mappings possible:
-    <0 1 2 3>
-    <1 2 3 0>
-    <2 3 0 1>
-    <3 0 1 2>
-    <0 3 2 1>
-    <1 0 3 2>
-    <2 1 0 3>
-    <3 2 1 0>
-
-DSI PHY:
-Required properties:
-- compatible: Could be the following
-  * "qcom,dsi-phy-28nm-hpm"
-  * "qcom,dsi-phy-28nm-lp"
-  * "qcom,dsi-phy-20nm"
-  * "qcom,dsi-phy-28nm-8960"
-  * "qcom,dsi-phy-14nm"
-  * "qcom,dsi-phy-10nm"
-  * "qcom,dsi-phy-10nm-8998"
-- reg: Physical base address and length of the registers of PLL, PHY. Some
-  revisions require the PHY regulator base address, whereas others require the
-  PHY lane base address. See below for each PHY revision.
-- reg-names: The names of register regions. The following regions are required:
-  For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY:
-  * "dsi_pll"
-  * "dsi_phy"
-  * "dsi_phy_regulator"
-  For DSI 14nm and 10nm PHYs:
-  * "dsi_pll"
-  * "dsi_phy"
-  * "dsi_phy_lane"
-- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
-  2 clocks: A byte clock (index 0), and a pixel clock (index 1).
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: Phandles to device clocks. See [1] for details on clock bindings.
-- clock-names: the following clocks are required:
-  * "iface"
-  * "ref" (only required for new DTS files/entries)
-  For 28nm HPM/LP, 28nm 8960 PHYs:
-- vddio-supply: phandle to vdd-io regulator device node
-  For 20nm PHY:
-- vddio-supply: phandle to vdd-io regulator device node
-- vcca-supply: phandle to vcca regulator device node
-  For 14nm PHY:
-- vcca-supply: phandle to vcca regulator device node
-  For 10nm PHY:
-- vdds-supply: phandle to vdds regulator device node
-
-Optional properties:
-- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
-  regulator is wanted.
-- qcom,mdss-mdp-transfer-time-us:	Specifies the dsi transfer time for command mode
-					panels in microseconds. Driver uses this number to adjust
-					the clock rate according to the expected transfer time.
-					Increasing this value would slow down the mdp processing
-					and can result in slower performance.
-					Decreasing this value can speed up the mdp processing,
-					but this can also impact power consumption.
-					As a rule this time should not be higher than the time
-					that would be expected with the processing at the
-					dsi link rate since anyways this would be the maximum
-					transfer time that could be achieved.
-					If ping pong split is enabled, this time should not be higher
-					than two times the dsi link rate time.
-					If the property is not specified, then the default value is 14000 us.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/graph.txt
-[3] Documentation/devicetree/bindings/media/video-interfaces.txt
-[4] Documentation/devicetree/bindings/display/panel/
-
-Example:
-	dsi0: dsi@fd922800 {
-		compatible = "qcom,mdss-dsi-ctrl";
-		qcom,dsi-host-index = <0>;
-		interrupt-parent = <&mdp>;
-		interrupts = <4 0>;
-		reg-names = "dsi_ctrl";
-		reg = <0xfd922800 0x200>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names =
-			"bus",
-			"byte",
-			"core",
-			"core_mmss",
-			"iface",
-			"mdp_core",
-			"pixel";
-		clocks =
-			<&mmcc MDSS_AXI_CLK>,
-			<&mmcc MDSS_BYTE0_CLK>,
-			<&mmcc MDSS_ESC0_CLK>,
-			<&mmcc MMSS_MISC_AHB_CLK>,
-			<&mmcc MDSS_AHB_CLK>,
-			<&mmcc MDSS_MDP_CLK>,
-			<&mmcc MDSS_PCLK0_CLK>;
-
-		assigned-clocks =
-				 <&mmcc BYTE0_CLK_SRC>,
-				 <&mmcc PCLK0_CLK_SRC>;
-		assigned-clock-parents =
-				 <&dsi_phy0 0>,
-				 <&dsi_phy0 1>;
-
-		vdda-supply = <&pma8084_l2>;
-		vdd-supply = <&pma8084_l22>;
-		vddio-supply = <&pma8084_l12>;
-
-		phys = <&dsi_phy0>;
-		phy-names ="dsi-phy";
-
-		qcom,dual-dsi-mode;
-		qcom,master-dsi;
-		qcom,sync-dual-dsi;
-
-		qcom,mdss-mdp-transfer-time-us = <12000>;
-
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&dsi_active>;
-		pinctrl-1 = <&dsi_suspend>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				dsi0_in: endpoint {
-					remote-endpoint = <&mdp_intf1_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				dsi0_out: endpoint {
-					remote-endpoint = <&panel_in>;
-					data-lanes = <0 1 2 3>;
-				};
-			};
-		};
-
-		panel: panel@0 {
-			compatible = "sharp,lq101r1sx01";
-			reg = <0>;
-			link2 = <&secondary>;
-
-			power-supply = <...>;
-			backlight = <...>;
-
-			port {
-				panel_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
-				};
-			};
-		};
-	};
-
-	dsi_phy0: dsi-phy@fd922a00 {
-		compatible = "qcom,dsi-phy-28nm-hpm";
-		qcom,dsi-phy-index = <0>;
-		reg-names =
-			"dsi_pll",
-			"dsi_phy",
-			"dsi_phy_regulator";
-		reg =   <0xfd922a00 0xd4>,
-			<0xfd922b00 0x2b0>,
-			<0xfd922d80 0x7b>;
-		clock-names = "iface";
-		clocks = <&mmcc MDSS_AHB_CLK>;
-		#clock-cells = <1>;
-		vddio-supply = <&pma8084_l12>;
-
-		qcom,dsi-phy-regulator-ldo-mode;
-	};
diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt
deleted file mode 100644
index eff9daff418c..000000000000
--- a/Documentation/devicetree/bindings/display/msm/edp.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Qualcomm Technologies Inc. adreno/snapdragon eDP output
-
-Required properties:
-- compatible:
-  * "qcom,mdss-edp"
-- reg: Physical base address and length of the registers of controller and PLL
-- reg-names: The names of register regions. The following regions are required:
-  * "edp"
-  * "pll_base"
-- interrupts: The interrupt signal from the eDP block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: the following clocks are required:
-  * "core"
-  * "iface"
-  * "mdp_core"
-  * "pixel"
-  * "link"
-- #clock-cells: The value should be 1.
-- vdda-supply: phandle to vdda regulator device node
-- lvl-vdd-supply: phandle to regulator device node which is used to supply power
-  to HPD receiving chip
-- panel-en-gpios: GPIO pin to supply power to panel.
-- panel-hpd-gpios: GPIO pin used for eDP hpd.
-
-
-Example:
-	mdss_edp: qcom,mdss_edp@fd923400 {
-			compatible = "qcom,mdss-edp";
-			reg-names =
-				"edp",
-				"pll_base";
-			reg =	<0xfd923400 0x700>,
-				<0xfd923a00 0xd4>;
-			interrupt-parent = <&mdss_mdp>;
-			interrupts = <12 0>;
-			power-domains = <&mmcc MDSS_GDSC>;
-			clock-names =
-				"core",
-				"pixel",
-				"iface",
-				"link",
-				"mdp_core";
-			clocks =
-				<&mmcc MDSS_EDPAUX_CLK>,
-				<&mmcc MDSS_EDPPIXEL_CLK>,
-				<&mmcc MDSS_AHB_CLK>,
-				<&mmcc MDSS_EDPLINK_CLK>,
-				<&mmcc MDSS_MDP_CLK>;
-			#clock-cells = <1>;
-			vdda-supply = <&pma8084_l12>;
-			lvl-vdd-supply = <&lvl_vreg>;
-			panel-en-gpios = <&tlmm 137 0>;
-			panel-hpd-gpios = <&tlmm 103 0>;
-	};
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt
deleted file mode 100644
index bf9c7a2a495c..000000000000
--- a/Documentation/devicetree/bindings/display/msm/gmu.txt
+++ /dev/null
@@ -1,116 +0,0 @@
-Qualcomm adreno/snapdragon GMU (Graphics management unit)
-
-The GMU is a programmable power controller for the GPU. the CPU controls the
-GMU which in turn handles power controls for the GPU.
-
-Required properties:
-- compatible: "qcom,adreno-gmu-XYZ.W", "qcom,adreno-gmu"
-    for example: "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"
-  Note that you need to list the less specific "qcom,adreno-gmu"
-  for generic matches and the more specific identifier to identify
-  the specific device.
-- reg: Physical base address and length of the GMU registers.
-- reg-names: Matching names for the register regions
-  * "gmu"
-  * "gmu_pdc"
-  * "gmu_pdc_seg"
-- interrupts: The interrupt signals from the GMU.
-- interrupt-names: Matching names for the interrupts
-  * "hfi"
-  * "gmu"
-- clocks: phandles to the device clocks
-- clock-names: Matching names for the clocks
-   * "gmu"
-   * "cxo"
-   * "axi"
-   * "mnoc"
-- power-domains: should be:
-	<&clock_gpucc GPU_CX_GDSC>
-	<&clock_gpucc GPU_GX_GDSC>
-- power-domain-names: Matching names for the power domains
-- iommus: phandle to the adreno iommu
-- operating-points-v2: phandle to the OPP operating points
-
-Optional properties:
-- sram: phandle to the On Chip Memory (OCMEM) that's present on some Snapdragon
-        SoCs. See Documentation/devicetree/bindings/sram/qcom,ocmem.yaml.
-
-Example:
-
-/ {
-	...
-
-	gmu: gmu@506a000 {
-		compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
-
-		reg = <0x506a000 0x30000>,
-			<0xb280000 0x10000>,
-			<0xb480000 0x10000>;
-		reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
-
-		interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hfi", "gmu";
-
-		clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
-			<&gpucc GPU_CC_CXO_CLK>,
-			<&gcc GCC_DDRSS_GPU_AXI_CLK>,
-			<&gcc GCC_GPU_MEMNOC_GFX_CLK>;
-		clock-names = "gmu", "cxo", "axi", "memnoc";
-
-		power-domains = <&gpucc GPU_CX_GDSC>,
-				<&gpucc GPU_GX_GDSC>;
-		power-domain-names = "cx", "gx";
-
-		iommus = <&adreno_smmu 5>;
-
-		operating-points-v2 = <&gmu_opp_table>;
-	};
-};
-
-a3xx example with OCMEM support:
-
-/ {
-	...
-
-	gpu: adreno@fdb00000 {
-		compatible = "qcom,adreno-330.2",
-		             "qcom,adreno";
-		reg = <0xfdb00000 0x10000>;
-		reg-names = "kgsl_3d0_reg_memory";
-		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "kgsl_3d0_irq";
-		clock-names = "core",
-		              "iface",
-		              "mem_iface";
-		clocks = <&mmcc OXILI_GFX3D_CLK>,
-		         <&mmcc OXILICX_AHB_CLK>,
-		         <&mmcc OXILICX_AXI_CLK>;
-		sram = <&gmu_sram>;
-		power-domains = <&mmcc OXILICX_GDSC>;
-		operating-points-v2 = <&gpu_opp_table>;
-		iommus = <&gpu_iommu 0>;
-	};
-
-	ocmem@fdd00000 {
-		compatible = "qcom,msm8974-ocmem";
-
-		reg = <0xfdd00000 0x2000>,
-		      <0xfec00000 0x180000>;
-		reg-names = "ctrl",
-		             "mem";
-
-		clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
-		         <&mmcc OCMEMCX_OCMEMNOC_CLK>;
-		clock-names = "core",
-		              "iface";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		gmu_sram: gmu-sram@0 {
-			reg = <0x0 0x100000>;
-			ranges = <0 0 0xfec00000 0x100000>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
new file mode 100644
index 000000000000..67fdeeabae0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -0,0 +1,251 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright 2019-2020, The Linux Foundation, All Rights Reserved
+%YAML 1.2
+---
+
+$id: "http://devicetree.org/schemas/display/msm/gmu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Devicetree bindings for the GMU attached to certain Adreno GPUs
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+description: |
+  These bindings describe the Graphics Management Unit (GMU) that is attached
+  to members of the Adreno A6xx GPU family. The GMU provides on-device power
+  management and support to improve power efficiency and reduce the load on
+  the CPU.
+
+properties:
+  compatible:
+    items:
+      - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$'
+      - const: qcom,adreno-gmu
+
+  reg:
+    minItems: 3
+    maxItems: 4
+
+  reg-names:
+    minItems: 3
+    maxItems: 4
+
+  clocks:
+    minItems: 4
+    maxItems: 7
+
+  clock-names:
+    minItems: 4
+    maxItems: 7
+
+  interrupts:
+    items:
+      - description: GMU HFI interrupt
+      - description: GMU interrupt
+
+
+  interrupt-names:
+    items:
+      - const: hfi
+      - const: gmu
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: GX power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: gx
+
+  iommus:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  opp-table:
+    type: object
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - power-domains
+  - power-domain-names
+  - iommus
+  - operating-points-v2
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-618.0
+              - qcom,adreno-gmu-630.2
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+        clock-names:
+          items:
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-635.0
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: Resource controller registers
+            - description: GMU PDC registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: rscc
+            - const: gmu_pdc
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+            - description: GPU AHB clock
+            - description: GPU HUB CX clock
+            - description: GPU SMMU vote clock
+        clock-names:
+          items:
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+            - const: ahb
+            - const: hub
+            - const: smmu_vote
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-640.1
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-650.2
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: Resource controller registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: rscc
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-640.1
+              - qcom,adreno-gmu-650.2
+    then:
+      properties:
+        clocks:
+          items:
+            - description: GPU AHB clock
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+        clock-names:
+          items:
+            - const: ahb
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gmu: gmu@506a000 {
+        compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+
+        reg = <0x506a000 0x30000>,
+              <0xb280000 0x10000>,
+              <0xb480000 0x10000>;
+        reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+        clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+                 <&gpucc GPU_CC_CXO_CLK>,
+                 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+                 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+        clock-names = "gmu", "cxo", "axi", "memnoc";
+
+        interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "hfi", "gmu";
+
+        power-domains = <&gpucc GPU_CX_GDSC>,
+                        <&gpucc GPU_GX_GDSC>;
+        power-domain-names = "cx", "gx";
+
+        iommus = <&adreno_smmu 5>;
+        operating-points-v2 = <&gmu_opp_table>;
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
deleted file mode 100644
index 7edc298a15f2..000000000000
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Qualcomm adreno/snapdragon GPU
-
-Required properties:
-- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or
-	      "amd,imageon-XYZ.W", "amd,imageon"
-    for example: "qcom,adreno-306.0", "qcom,adreno"
-  Note that you need to list the less specific "qcom,adreno" (since this
-  is what the device is matched on), in addition to the more specific
-  with the chip-id.
-  If "amd,imageon" is used, there should be no top level msm device.
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The interrupt signal from the gpu.
-- clocks: device clocks (if applicable)
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required by a3xx, a4xx and a5xx
-  cores:
-  * "core"
-  * "iface"
-  * "mem_iface"
-  For GMU attached devices the GPU clocks are not used and are not required. The
-  following devices should not list clocks:
-   - qcom,adreno-630.2
-- iommus: optional phandle to an adreno iommu instance
-- operating-points-v2: optional phandle to the OPP operating points
-- interconnects: optional phandle to an interconnect provider.  See
-  ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms
-  will have two paths; all others will have one path.
-- interconnect-names: The names of the interconnect paths that correspond to the
-  interconnects property. Values must be gfx-mem and ocmem.
-- qcom,gmu: For GMU attached devices a phandle to the GMU device that will
-  control the power for the GPU. Applicable targets:
-    - qcom,adreno-630.2
-- zap-shader: For a5xx and a6xx devices this node contains a memory-region that
-  points to reserved memory to store the zap shader that can be used to help
-  bring the GPU out of secure mode.
-- firmware-name: optional property of the 'zap-shader' node, listing the
-  relative path of the device specific zap firmware.
-
-Example 3xx/4xx/a5xx:
-
-/ {
-	...
-
-	gpu: qcom,kgsl-3d0@4300000 {
-		compatible = "qcom,adreno-320.2", "qcom,adreno";
-		reg = <0x04300000 0x20000>;
-		reg-names = "kgsl_3d0_reg_memory";
-		interrupts = <GIC_SPI 80 0>;
-		clock-names =
-		    "core",
-		    "iface",
-		    "mem_iface";
-		clocks =
-		    <&mmcc GFX3D_CLK>,
-		    <&mmcc GFX3D_AHB_CLK>,
-		    <&mmcc MMSS_IMEM_AHB_CLK>;
-	};
-};
-
-Example a6xx (with GMU):
-
-/ {
-	...
-
-	gpu@5000000 {
-		compatible = "qcom,adreno-630.2", "qcom,adreno";
-		#stream-id-cells = <16>;
-
-		reg = <0x5000000 0x40000>, <0x509e000 0x10>;
-		reg-names = "kgsl_3d0_reg_memory", "cx_mem";
-
-		/*
-		 * Look ma, no clocks! The GPU clocks and power are
-		 * controlled entirely by the GMU
-		 */
-
-		interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-
-		iommus = <&adreno_smmu 0>;
-
-		operating-points-v2 = <&gpu_opp_table>;
-
-		interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
-		interconnect-names = "gfx-mem";
-
-		qcom,gmu = <&gmu>;
-
-		zap-shader {
-			memory-region = <&zap_shader_region>;
-			firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
new file mode 100644
index 000000000000..ec4b1a75f46a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -0,0 +1,292 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: "http://devicetree.org/schemas/display/msm/gpu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Devicetree bindings for the Adreno or Snapdragon GPUs
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: |
+          The driver is parsing the compat string for Adreno to
+          figure out the gpu-id and patch level.
+        items:
+          - pattern: '^qcom,adreno-[3-6][0-9][0-9]\.[0-9]$'
+          - const: qcom,adreno
+      - description: |
+          The driver is parsing the compat string for Imageon to
+          figure out the gpu-id and patch level.
+        items:
+          - pattern: '^amd,imageon-200\.[0-1]$'
+          - const: amd,imageon
+
+  clocks: true
+
+  clock-names: true
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: kgsl_3d0_reg_memory
+      - const: cx_mem
+      - const: cx_dbgc
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  interconnects:
+    minItems: 1
+    maxItems: 2
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: gfx-mem
+      - const: ocmem
+
+  iommus:
+    minItems: 1
+    maxItems: 64
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 4
+    items:
+      maxItems: 1
+    description: |
+      phandles to one or more reserved on-chip SRAM regions.
+      phandle to the On Chip Memory (OCMEM) that's present on some a3xx and
+      a4xx Snapdragon SoCs. See
+      Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  power-domains:
+    maxItems: 1
+
+  zap-shader:
+    type: object
+    additionalProperties: false
+    description: |
+      For a5xx and a6xx devices this node contains a memory-region that
+      points to reserved memory to store the zap shader that can be used to
+      help bring the GPU out of secure mode.
+    properties:
+      memory-region:
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      firmware-name:
+        description: |
+          Default name of the firmware to load to the remote processor.
+
+  "#cooling-cells":
+    const: 2
+
+  nvmem-cell-names:
+    maxItems: 1
+
+  nvmem-cells:
+    description: efuse registers
+    maxItems: 1
+
+  qcom,gmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      For GMU attached devices a phandle to the GMU device that will
+      control the power for the GPU.
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$'
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 7
+
+        clock-names:
+          items:
+            anyOf:
+              - const: core
+                description: GPU Core clock
+              - const: iface
+                description: GPU Interface clock
+              - const: mem
+                description: GPU Memory clock
+              - const: mem_iface
+                description: GPU Memory Interface clock
+              - const: alt_mem_iface
+                description: GPU Alternative Memory Interface clock
+              - const: gfx3d
+                description: GPU 3D engine clock
+              - const: rbbmtimer
+                description: GPU RBBM Timer for Adreno 5xx series
+          minItems: 2
+          maxItems: 7
+
+      required:
+        - clocks
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$'
+
+    then: # Since Adreno 6xx series clocks should be defined in GMU
+      properties:
+        clocks: false
+        clock-names: false
+
+examples:
+  - |
+
+    // Example a3xx/4xx:
+
+    #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpu: gpu@fdb00000 {
+        compatible = "qcom,adreno-330.2", "qcom,adreno";
+
+        reg = <0xfdb00000 0x10000>;
+        reg-names = "kgsl_3d0_reg_memory";
+
+        clock-names = "core", "iface", "mem_iface";
+        clocks = <&mmcc OXILI_GFX3D_CLK>,
+                 <&mmcc OXILICX_AHB_CLK>,
+                 <&mmcc OXILICX_AXI_CLK>;
+
+        interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "kgsl_3d0_irq";
+
+        sram = <&gpu_sram>;
+        power-domains = <&mmcc OXILICX_GDSC>;
+        operating-points-v2 = <&gpu_opp_table>;
+        iommus = <&gpu_iommu 0>;
+        #cooling-cells = <2>;
+    };
+
+    ocmem@fdd00000 {
+        compatible = "qcom,msm8974-ocmem";
+
+        reg = <0xfdd00000 0x2000>,
+              <0xfec00000 0x180000>;
+        reg-names = "ctrl", "mem";
+
+        clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+                 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+        clock-names = "core", "iface";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0xfec00000 0x100000>;
+
+        gpu_sram: gpu-sram@0 {
+            reg = <0x0 0x100000>;
+        };
+    };
+  - |
+
+    // Example a6xx (with GMU):
+
+    #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        zap_shader_region: gpu@8f200000 {
+            compatible = "shared-dma-pool";
+            reg = <0x0 0x90b00000 0x0 0xa00000>;
+            no-map;
+        };
+    };
+
+    gpu@5000000 {
+        compatible = "qcom,adreno-630.2", "qcom,adreno";
+
+        reg = <0x5000000 0x40000>, <0x509e000 0x10>;
+        reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+
+        #cooling-cells = <2>;
+
+        interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+        iommus = <&adreno_smmu 0>;
+
+        operating-points-v2 = <&gpu_opp_table>;
+
+        interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
+        interconnect-names = "gfx-mem";
+
+        qcom,gmu = <&gmu>;
+
+        gpu_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-430000000 {
+                opp-hz = /bits/ 64 <430000000>;
+                opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+                opp-peak-kBps = <5412000>;
+            };
+
+            opp-355000000 {
+                opp-hz = /bits/ 64 <355000000>;
+                opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+                opp-peak-kBps = <3072000>;
+            };
+
+            opp-267000000 {
+                opp-hz = /bits/ 64 <267000000>;
+                opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+                opp-peak-kBps = <3072000>;
+            };
+
+            opp-180000000 {
+                opp-hz = /bits/ 64 <180000000>;
+                opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+                opp-peak-kBps = <1804000>;
+            };
+        };
+
+        zap-shader {
+            memory-region = <&zap_shader_region>;
+            firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
deleted file mode 100644
index 5f90a40da51b..000000000000
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Qualcomm adreno/snapdragon hdmi output
-
-Required properties:
-- compatible: one of the following
-   * "qcom,hdmi-tx-8996"
-   * "qcom,hdmi-tx-8994"
-   * "qcom,hdmi-tx-8084"
-   * "qcom,hdmi-tx-8974"
-   * "qcom,hdmi-tx-8660"
-   * "qcom,hdmi-tx-8960"
-- reg: Physical base address and length of the controller's registers
-- reg-names: "core_physical"
-- interrupts: The interrupt signal from the hdmi block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See ../clocks/clock-bindings.txt for details.
-- core-vdda-supply: phandle to supply regulator
-- hdmi-mux-supply: phandle to mux regulator
-- phys: the phandle for the HDMI PHY device
-- phy-names: the name of the corresponding PHY device
-
-Optional properties:
-- hpd-gpios: hpd pin
-- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin
-- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin
-- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin
-- power-domains: reference to the power domain(s), if available.
-- pinctrl-names: the pin control state names; should contain "default"
-- pinctrl-0: the default pinctrl state (active)
-- pinctrl-1: the "sleep" pinctrl state
-
-HDMI PHY:
-Required properties:
-- compatible: Could be the following
-  * "qcom,hdmi-phy-8660"
-  * "qcom,hdmi-phy-8960"
-  * "qcom,hdmi-phy-8974"
-  * "qcom,hdmi-phy-8084"
-  * "qcom,hdmi-phy-8996"
-- #phy-cells: Number of cells in a PHY specifier; Should be 0.
-- reg: Physical base address and length of the registers of the PHY sub blocks.
-- reg-names: The names of register regions. The following regions are required:
-  * "hdmi_phy"
-  * "hdmi_pll"
-  For HDMI PHY on msm8996, these additional register regions are required:
-    * "hdmi_tx_l0"
-    * "hdmi_tx_l1"
-    * "hdmi_tx_l3"
-    * "hdmi_tx_l4"
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- core-vdda-supply: phandle to vdda regulator device node
-
-Example:
-
-/ {
-	...
-
-	hdmi: hdmi@4a00000 {
-		compatible = "qcom,hdmi-tx-8960";
-		reg-names = "core_physical";
-		reg = <0x04a00000 0x2f0>;
-		interrupts = <GIC_SPI 79 0>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names =
-		    "core",
-		    "master_iface",
-		    "slave_iface";
-		clocks =
-		    <&mmcc HDMI_APP_CLK>,
-		    <&mmcc HDMI_M_AHB_CLK>,
-		    <&mmcc HDMI_S_AHB_CLK>;
-		qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
-		qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
-		qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
-		core-vdda-supply = <&pm8921_hdmi_mvs>;
-		hdmi-mux-supply = <&ext_3p3v>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
-		pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
-
-		phys = <&hdmi_phy>;
-		phy-names = "hdmi_phy";
-	};
-
-	hdmi_phy: phy@4a00400 {
-		compatible = "qcom,hdmi-phy-8960";
-		reg-names = "hdmi_phy",
-			    "hdmi_pll";
-		reg = <0x4a00400 0x60>,
-		      <0x4a00500 0x100>;
-		#phy-cells = <0>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names = "slave_iface";
-		clocks = <&mmcc HDMI_S_AHB_CLK>;
-		core-vdda-supply = <&pm8921_hdmi_mvs>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.yaml b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
new file mode 100644
index 000000000000..47e97669821c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/display/msm/hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon HDMI output
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-tx-8084
+      - qcom,hdmi-tx-8660
+      - qcom,hdmi-tx-8960
+      - qcom,hdmi-tx-8974
+      - qcom,hdmi-tx-8994
+      - qcom,hdmi-tx-8996
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: core_physical
+      - const: qfprom_physical
+      - const: hdcp_physical
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    enum:
+      - hdmi_phy
+      - hdmi-phy
+    deprecated: true
+
+  core-vdda-supply:
+    description: phandle to VDDA supply regulator
+
+  hdmi-mux-supply:
+    description: phandle to mux regulator
+    deprecated: true
+
+  core-vcc-supply:
+    description: phandle to VCC supply regulator
+
+  hpd-gpios:
+    maxItems: 1
+    description: hpd pin
+
+  qcom,hdmi-tx-mux-en-gpios:
+    maxItems: 1
+    deprecated: true
+    description: HDMI mux enable pin
+
+  qcom,hdmi-tx-mux-sel-gpios:
+    maxItems: 1
+    deprecated: true
+    description: HDMI mux select pin
+
+  qcom,hdmi-tx-mux-lpm-gpios:
+    maxItems: 1
+    deprecated: true
+    description: HDMI mux lpm pin
+
+  '#sound-dai-cells':
+    const: 1
+
+  ports:
+    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - interrupts
+  - phys
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8960
+              - qcom,hdmi-tx-8660
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: core
+            - const: master_iface
+            - const: slave_iface
+        core-vcc-supplies: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8974
+              - qcom,hdmi-tx-8084
+              - qcom,hdmi-tx-8994
+              - qcom,hdmi-tx-8996
+    then:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: core
+            - const: alt_iface
+            - const: extp
+        hdmi-mux-supplies: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi: hdmi@4a00000 {
+      compatible = "qcom,hdmi-tx-8960";
+      reg-names = "core_physical";
+      reg = <0x04a00000 0x2f0>;
+      interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+      clock-names = "core",
+                    "master_iface",
+                    "slave_iface";
+      clocks = <&clk 61>,
+               <&clk 72>,
+               <&clk 98>;
+      hpd-gpios = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
+      core-vdda-supply = <&pm8921_hdmi_mvs>;
+      hdmi-mux-supply = <&ext_3p3v>;
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
+      pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
+
+      phys = <&hdmi_phy>;
+    };
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi@9a0000 {
+      compatible = "qcom,hdmi-tx-8996";
+      reg = <0x009a0000 0x50c>,
+            <0x00070000 0x6158>,
+            <0x009e0000 0xfff>;
+      reg-names = "core_physical",
+                  "qfprom_physical",
+                  "hdcp_physical";
+
+      interrupt-parent = <&mdss>;
+      interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&mmcc MDSS_MDP_CLK>,
+               <&mmcc MDSS_AHB_CLK>,
+               <&mmcc MDSS_HDMI_CLK>,
+               <&mmcc MDSS_HDMI_AHB_CLK>,
+               <&mmcc MDSS_EXTPCLK_CLK>;
+      clock-names = "mdp_core",
+                    "iface",
+                    "core",
+                    "alt_iface",
+                    "extp";
+
+      phys = <&hdmi_phy>;
+      #sound-dai-cells = <1>;
+
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+      pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+      core-vdda-supply = <&vreg_l12a_1p8>;
+      core-vcc-supply = <&vreg_s4a_1p8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          endpoint {
+            remote-endpoint = <&mdp5_intf3_out>;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.txt b/Documentation/devicetree/bindings/display/msm/mdp4.txt
deleted file mode 100644
index b07eeb38f709..000000000000
--- a/Documentation/devicetree/bindings/display/msm/mdp4.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-Qualcomm adreno/snapdragon MDP4 display controller
-
-Description:
-
-This is the bindings documentation for the MDP4 display controller found in
-SoCs like MSM8960, APQ8064 and MSM8660.
-
-Required properties:
-- compatible:
-  * "qcom,mdp4" - mdp4
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The interrupt signal from the display controller.
-- clocks: device clocks
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
-  * "core_clk"
-  * "iface_clk"
-  * "bus_clk"
-  * "lut_clk"
-  * "hdmi_clk"
-  * "tv_clk"
-- ports: contains the list of output ports from MDP. These connect to interfaces
-  that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
-  special case since it is a part of the MDP block itself).
-
-  Each output port contains an endpoint that describes how it is connected to an
-  external interface. These are described by the standard properties documented
-  here:
-	Documentation/devicetree/bindings/graph.txt
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-  The output port mappings are:
-	Port 0 -> LCDC/LVDS
-	Port 1 -> DSI1 Cmd/Video
-	Port 2 -> DSI2 Cmd/Video
-	Port 3 -> DTV
-
-Optional properties:
-- clock-names: the following clocks are optional:
-  * "lut_clk"
-- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be
-  used for LCDC. This is only valid for 18bpp panels.
-
-Example:
-
-/ {
-	...
-
-	hdmi: hdmi@4a00000 {
-		...
-		ports {
-			...
-			port@0 {
-				reg = <0>;
-				hdmi_in: endpoint {
-					remote-endpoint = <&mdp_dtv_out>;
-				};
-			};
-			...
-		};
-		...
-	};
-
-	...
-
-	mdp: mdp@5100000 {
-		compatible = "qcom,mdp4";
-		reg = <0x05100000 0xf0000>;
-		interrupts = <GIC_SPI 75 0>;
-		clock-names =
-		    "core_clk",
-		    "iface_clk",
-		    "lut_clk",
-		    "hdmi_clk",
-		    "tv_clk";
-		clocks =
-		    <&mmcc MDP_CLK>,
-		    <&mmcc MDP_AHB_CLK>,
-		    <&mmcc MDP_AXI_CLK>,
-		    <&mmcc MDP_LUT_CLK>,
-		    <&mmcc HDMI_TV_CLK>,
-		    <&mmcc MDP_TV_CLK>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					mdp_lvds_out: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					mdp_dsi1_out: endpoint {
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					mdp_dsi2_out: endpoint {
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-					mdp_dtv_out: endpoint {
-						remote-endpoint = <&hdmi_in>;
-					};
-				};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.yaml b/Documentation/devicetree/bindings/display/msm/mdp4.yaml
new file mode 100644
index 000000000000..58c13f5277b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdp4.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/msm/mdp4.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Adreno/Snapdragon MDP4 display controller
+
+description: >
+  MDP4 display controller found in SoCs like MSM8960, APQ8064 and MSM8660.
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    const: qcom,mdp4
+
+  clocks:
+    minItems: 6
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: core_clk
+      - const: iface_clk
+      - const: bus_clk
+      - const: lut_clk
+      - const: hdmi_clk
+      - const: tv_clk
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 4
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: LCDC/LVDS
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI1 Cmd / Video
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI2 Cmd / Video
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Digital TV
+
+  qcom,lcdc-align-lsb:
+    type: boolean
+    description: >
+      Indication that LSB alignment should be used for LCDC.
+      This is only valid for 18bpp panels.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    mdp: mdp@5100000 {
+        compatible = "qcom,mdp4";
+        reg = <0x05100000 0xf0000>;
+        interrupts = <0 75 0>;
+        clock-names =
+            "core_clk",
+            "iface_clk",
+            "bus_clk",
+            "lut_clk",
+            "hdmi_clk",
+            "tv_clk";
+        clocks =
+            <&mmcc 77>,
+            <&mmcc 86>,
+            <&mmcc 102>,
+            <&mmcc 75>,
+            <&mmcc 97>,
+            <&mmcc 12>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                mdp_lvds_out: endpoint {
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                mdp_dsi1_out: endpoint {
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                mdp_dsi2_out: endpoint {
+                };
+            };
+
+            port@3 {
+                reg = <3>;
+                mdp_dtv_out: endpoint {
+                    remote-endpoint = <&hdmi_in>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt
deleted file mode 100644
index c985871c46b3..000000000000
--- a/Documentation/devicetree/bindings/display/mxsfb.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-* Freescale MXS LCD Interface (LCDIF)
-
-New bindings:
-=============
-Required properties:
-- compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
-		Should be "fsl,imx28-lcdif" for i.MX28.
-		Should be "fsl,imx6sx-lcdif" for i.MX6SX.
-		Should be "fsl,imx8mq-lcdif" for i.MX8MQ.
-- reg:		Address and length of the register set for LCDIF
-- interrupts:	Should contain LCDIF interrupt
-- clocks:	A list of phandle + clock-specifier pairs, one for each
-		entry in 'clock-names'.
-- clock-names:	A list of clock names. For MXSFB it should contain:
-    - "pix" for the LCDIF block clock
-    - (MX6SX-only) "axi", "disp_axi" for the bus interface clock
-
-Required sub-nodes:
-  - port: The connection to an encoder chip.
-
-Example:
-
-	lcdif1: display-controller@2220000 {
-		compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
-		reg = <0x02220000 0x4000>;
-		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
-			 <&clks IMX6SX_CLK_LCDIF_APB>,
-			 <&clks IMX6SX_CLK_DISPLAY_AXI>;
-		clock-names = "pix", "axi", "disp_axi";
-
-		port {
-			parallel_out: endpoint {
-				remote-endpoint = <&panel_in_parallel>;
-			};
-		};
-	};
-
-Deprecated bindings:
-====================
-Required properties:
-- compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
-		Should be "fsl,imx28-lcdif" for i.MX28.
-- reg:		Address and length of the register set for LCDIF
-- interrupts:	Should contain LCDIF interrupts
-- display:	phandle to display node (see below for details)
-
-* display node
-
-Required properties:
-- bits-per-pixel:	<16> for RGB565, <32> for RGB888/666.
-- bus-width:		number of data lines.  Could be <8>, <16>, <18> or <24>.
-
-Required sub-node:
-- display-timings:	Refer to binding doc display-timing.txt for details.
-
-Examples:
-
-lcdif@80030000 {
-	compatible = "fsl,imx28-lcdif";
-	reg = <0x80030000 2000>;
-	interrupts = <38 86>;
-
-	display: display {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <33500000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <164>;
-				hback-porch = <89>;
-				hsync-len = <10>;
-				vback-porch = <23>;
-				vfront-porch = <10>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
new file mode 100644
index 000000000000..acd2f3faa6b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/abt,y030xx067a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: abt,y030xx067a
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "abt,y030xx067a";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
new file mode 100644
index 000000000000..3a8c2c11f9bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/advantech,idk-1110wr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advantech IDK-1110WR 10.1" WSVGA LVDS Display Panel
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: advantech,idk-1110wr
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: advantech,idk-1110wr
+      - const: panel-lvds
+
+  data-mapping:
+    const: jeida-24
+
+  width-mm:
+    const: 223
+
+  height-mm:
+    const: 125
+
+  panel-timing: true
+  port: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+examples:
+  - |+
+    panel {
+      compatible = "advantech,idk-1110wr", "panel-lvds";
+
+      width-mm = <223>;
+      height-mm = <125>;
+
+      data-mapping = "jeida-24";
+
+      panel-timing {
+        /* 1024x600 @60Hz */
+        clock-frequency = <51200000>;
+        hactive = <1024>;
+        vactive = <600>;
+        hsync-len = <240>;
+        hfront-porch = <40>;
+        hback-porch = <40>;
+        vsync-len = <10>;
+        vfront-porch = <15>;
+        vback-porch = <10>;
+      };
+
+      port {
+        panel_in: endpoint {
+          remote-endpoint = <&lvds_encoder>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml
new file mode 100644
index 000000000000..67682fe77f10
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/advantech,idk-2121wr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advantech IDK-2121WR 21.5" Full-HD dual-LVDS panel
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The IDK-2121WR from Advantech is a Full-HD dual-LVDS panel.
+  A dual-LVDS interface is a dual-link connection with even pixels traveling
+  on one link, and with odd pixels traveling on the other link.
+
+  The panel expects odd pixels on the first port, and even pixels on the
+  second port, therefore the ports must be marked accordingly (with either
+  dual-lvds-odd-pixels or dual-lvds-even-pixels).
+
+properties:
+  compatible:
+    items:
+      - const: advantech,idk-2121wr
+      - {} # panel-lvds, but not listed here to avoid false select
+
+  width-mm:
+    const: 476
+
+  height-mm:
+    const: 268
+
+  data-mapping:
+    const: vesa-24
+
+  panel-timing: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: The sink for odd pixels.
+        properties:
+          dual-lvds-odd-pixels: true
+
+        required:
+          - dual-lvds-odd-pixels
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: The sink for even pixels.
+        properties:
+          dual-lvds-even-pixels: true
+
+        required:
+          - dual-lvds-even-pixels
+
+    required:
+      - port@0
+      - port@1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - width-mm
+  - height-mm
+  - data-mapping
+  - panel-timing
+  - ports
+
+examples:
+  - |+
+    panel-lvds {
+      compatible = "advantech,idk-2121wr", "panel-lvds";
+
+      width-mm = <476>;
+      height-mm = <268>;
+
+      data-mapping = "vesa-24";
+
+      panel-timing {
+        clock-frequency = <148500000>;
+        hactive = <1920>;
+        vactive = <1080>;
+        hsync-len = <44>;
+        hfront-porch = <88>;
+        hback-porch = <148>;
+        vfront-porch = <4>;
+        vback-porch = <36>;
+        vsync-len = <5>;
+      };
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          dual-lvds-odd-pixels;
+          panel_in0: endpoint {
+            remote-endpoint = <&lvds0_out>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+          dual-lvds-even-pixels;
+          panel_in1: endpoint {
+            remote-endpoint = <&lvds1_out>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml b/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml
new file mode 100644
index 000000000000..4ad484f09ba3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,rtsm-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm RTSM Virtual Platforms Display
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: arm,rtsm-display
+
+  port: true
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt
deleted file mode 100644
index 0601a9e34703..000000000000
--- a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-ARM Versatile TFT Panels
-
-These panels are connected to the daughterboards found on the
-ARM Versatile reference designs.
-
-This device node must appear as a child to a "syscon"-compatible
-node.
-
-Required properties:
-- compatible: should be "arm,versatile-tft-panel"
-
-Required subnodes:
-- port: see display/panel/panel-common.yaml, graph.txt
-
-
-Example:
-
-sysreg@0 {
-	compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
-	reg = <0x00000 0x1000>;
-
-	panel: display@0 {
-		compatible = "arm,versatile-tft-panel";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&foo>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
new file mode 100644
index 000000000000..c9958f824d9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,versatile-tft-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile TFT Panels
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  These panels are connected to the daughterboards found on the
+  ARM Versatile reference designs.
+
+  This device node must appear as a child to a "syscon"-compatible
+  node.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: arm,versatile-tft-panel
+
+  port: true
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    sysreg@0 {
+        compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
+        reg = <0x00000 0x1000>;
+
+        panel {
+            compatible = "arm,versatile-tft-panel";
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&foo>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
new file mode 100644
index 000000000000..75a09df68ba0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/asus,z00t-tm5p5-nt35596.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASUS Z00T TM5P5 NT35596 5.5" 1080×1920 LCD Panel
+
+maintainers:
+  - Konrad Dybcio <konradybcio@gmail.com>
+
+description: |+
+  This panel seems to only be found in the Asus Z00T
+  smartphone and we have no straightforward way of
+  actually getting the correct model number,
+  as no schematics are released publicly.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: asus,z00t-tm5p5-n35596
+  reg: true
+  reset-gpios: true
+  vdd-supply:
+    description: core voltage supply
+  vddio-supply:
+    description: vddio supply
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            panel@0 {
+                    reg = <0>;
+
+                    compatible = "asus,z00t-tm5p5-n35596";
+
+                    vdd-supply = <&pm8916_l8>;
+                    vddio-supply = <&pm8916_l6>;
+                    reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt b/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt
deleted file mode 100644
index bae0e2b51467..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-AU Optronics Corporation 8.0" WUXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b101ean01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt b/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt
deleted file mode 100644
index 72e088a4fb3a..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-AU Optronics Corporation 10.1" WSVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b101aw03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt b/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt
deleted file mode 100644
index 3590b0741619..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-AU Optronics Corporation 10.1" WSVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b101ean01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt b/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt
deleted file mode 100644
index 889d511d66c9..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-AU Optronics Corporation 10.1" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b101xtn01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt b/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt
deleted file mode 100644
index 690d0a568ef3..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
-
-Required properties:
-- compatible: should be "auo,b116xw03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt b/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt
deleted file mode 100644
index 302226b5bb55..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
-
-Required properties:
-- compatible: should be "auo,b133htn01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt b/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt
deleted file mode 100644
index 7443b7c76769..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,b133xtn01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt b/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt
deleted file mode 100644
index 49e4105378f6..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g070vvn01"
-- backlight: phandle of the backlight device attached to the panel
-- power-supply: single regulator to provide the supply voltage
-
-Required nodes:
-- port: Parallel port mapping to connect this display
-
-This panel needs single power supply voltage. Its backlight is conntrolled
-via PWM signal.
-
-Example:
---------
-
-Example device-tree definition when connected to iMX6Q based board
-
-	lcd_panel: lcd-panel {
-		compatible = "auo,g070vvn01";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_display>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt b/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt
deleted file mode 100644
index bc6a0c858e23..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g101evn010"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt b/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt
deleted file mode 100644
index 85626edf63e5..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g104sn02"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g133han01.txt b/Documentation/devicetree/bindings/display/panel/auo,g133han01.txt
deleted file mode 100644
index 3afc76747824..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,g133han01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g133han01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g185han01.txt b/Documentation/devicetree/bindings/display/panel/auo,g185han01.txt
deleted file mode 100644
index ed657c2141d4..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,g185han01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,g185han01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt b/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt
deleted file mode 100644
index 59bb6cd8aa75..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,p320hvn03"
-- power-supply: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/auo,t215hvn01.txt b/Documentation/devicetree/bindings/display/panel/auo,t215hvn01.txt
deleted file mode 100644
index cbd9da3f03b1..000000000000
--- a/Documentation/devicetree/bindings/display/panel/auo,t215hvn01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
-
-Required properties:
-- compatible: should be "auo,t215hvn01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt b/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt
deleted file mode 100644
index b6f2f3e8f44e..000000000000
--- a/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
-
-Required properties:
-- compatible: should be "avic,tm070ddh03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml
new file mode 100644
index 000000000000..a8f3afa922c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED
+  video mode panel module on MIPI-DSI 4-Lane interface, GGRB
+  pixel arrangement, 63 micrometers pitch, with an active
+  area of 68.04 x 136.08 millimeters.
+  Each pixel is divided into red and green dots, or blue and
+  green dots, and two pixels share red or blue dots which are
+  arranged in vertical stripe.
+  The DriverIC for this panel module is SW43404.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: boe,bf060y8m-aj0
+
+  elvdd-supply:
+    description: EL Driving positive (VDD) supply (4.40-4.80V)
+  elvss-supply:
+    description: EL Driving negative (VSS) supply (-5.00V to -1.40V)
+  vcc-supply:
+    description: Core (TSP) voltage supply (2.70-3.60V)
+  vci-supply:
+    description: DriverIC Operation supply (2.60-3.60V)
+  vddio-supply:
+    description: I/O voltage supply (1.62-1.98V)
+
+  port: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - elvdd-supply
+  - elvss-supply
+  - vcc-supply
+  - vci-supply
+  - vddio-supply
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,bf060y8m-aj0";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+            vcc-supply = <&disp_vcc_vreg>;
+            vddio-supply = <&disp_vddio_vreg>;
+            vci-supply = <&disp_vci_vreg>;
+            elvdd-supply = <&disp_elvdd_vreg>;
+            elvss-supply = <&disp_elvss_vreg>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt
deleted file mode 100644
index 3caea2172b1b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Boe Himax8279d 1200x1920 TFT LCD panel
-
-Required properties:
-- compatible: should be "boe,himax8279d8p" and one of: "boe,himax8279d10p"
-- reg: DSI virtual channel of the peripheral
-- enable-gpios: panel enable gpio
-- pp33-gpios: a GPIO phandle for the 3.3v pin that provides the supply voltage
-- pp18-gpios: a GPIO phandle for the 1.8v pin that provides the supply voltage
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
-
-	&mipi_dsi {
-		panel {
-			compatible = "boe,himax8279d8p", "boe,himax8279d10p";
-			reg = <0>;
-			backlight = <&backlight>;
-			enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
-			pp33-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			pp18-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
new file mode 100644
index 000000000000..272a3a018a33
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,himax8279d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Boe Himax8279d 1200x1920 TFT LCD panel
+
+maintainers:
+  - Jerry Han <jerry.han.hq@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: boe,himax8279d8p
+      - const: boe,himax8279d10p
+
+  backlight: true
+  enable-gpios: true
+  reg: true
+
+  pp33-gpios:
+    maxItems: 1
+    description: GPIO for the 3.3v pin that provides the supply voltage
+
+  pp18-gpios:
+    maxItems: 1
+    description: GPIO for the 1.8v pin that provides the supply voltage
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - pp33-gpios
+  - pp18-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,himax8279d8p", "boe,himax8279d10p";
+            reg = <0>;
+            backlight = <&backlight>;
+            enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+            pp33-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+            pp18-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt
deleted file mode 100644
index 55183d360032..000000000000
--- a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "boe,hv070wsa-100"
-- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
-- enable-gpios: GPIO pin to enable and disable panel (active high)
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [1]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	panel: panel {
-		compatible = "boe,hv070wsa-100";
-		power-supply = <&vcc_3v3_reg>;
-		enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
-		port {
-			panel_ep: endpoint {
-				remote-endpoint = <&bridge_out_ep>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt b/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt
deleted file mode 100644
index b258d6a91ec6..000000000000
--- a/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "boe,nv101wxmn51"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
deleted file mode 100644
index 50be5e2438b2..000000000000
--- a/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Boe Corporation 8.0" WUXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "boe,tv080wum-nl0"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
new file mode 100644
index 000000000000..a2384bd74cf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-NL6 DSI Display Panel
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+        # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel
+      - boe,tv101wum-nl6
+        # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel
+      - auo,kd101n80-45na
+        # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel
+      - boe,tv101wum-n53
+        # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel
+      - auo,b101uan08.3
+        # BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel
+      - boe,tv105wum-nw0
+        # BOE TV110C9M-LL3 10.95" WUXGA TFT LCD panel
+      - boe,tv110c9m-ll3
+        # INX HJ110IZ-01A 10.95" WUXGA TFT LCD panel
+      - innolux,hj110iz-01a
+
+  reg:
+    description: the virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: a GPIO spec for the enable pin
+
+  pp1800-supply:
+    description: core voltage supply
+
+  pp3300-supply:
+    description: core voltage supply
+
+  avdd-supply:
+    description: phandle of the regulator that provides positive voltage
+
+  avee-supply:
+    description: phandle of the regulator that provides negative voltage
+
+  backlight:
+    description: phandle of the backlight device attached to the panel
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - pp1800-supply
+  - avdd-supply
+  - avee-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,tv101wum-nl6";
+            reg = <0>;
+            enable-gpios = <&pio 45 0>;
+            avdd-supply = <&ppvarn_lcd>;
+            avee-supply = <&ppvarp_lcd>;
+            pp1800-supply = <&pp1800_lcd>;
+            backlight = <&backlight_lcd0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt b/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt
deleted file mode 100644
index 057f7f3f6dbe..000000000000
--- a/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
-
-Required properties:
-- compatible: should be "cdtech,s043wq26h-ct7"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt b/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt
deleted file mode 100644
index 505615dfa0df..000000000000
--- a/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel
-
-Required properties:
-- compatible: should be "cdtech,s070wv95-ct16"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt b/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt
deleted file mode 100644
index dd22685d2adc..000000000000
--- a/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "chunghwa,claa070wp03xg"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt b/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt
deleted file mode 100644
index f24614e4d5ec..000000000000
--- a/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "chunghwa,claa101wa01a"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt b/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt
deleted file mode 100644
index 0ab2c05a4c22..000000000000
--- a/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "chunghwa,claa101wb03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt b/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt
deleted file mode 100644
index 897085ee3cd4..000000000000
--- a/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface.
-
-Required properties:
-- compatible: should be "dataimage,scf0700c48ggu18"
-- power-supply: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/display-timing.txt b/Documentation/devicetree/bindings/display/panel/display-timing.txt
index 78222ced1874..7f55ad4a40c4 100644
--- a/Documentation/devicetree/bindings/display/panel/display-timing.txt
+++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt
@@ -1,123 +1 @@
-display-timing bindings
-=======================
-
-display-timings node
---------------------
-
-required properties:
- - none
-
-optional properties:
- - native-mode: The native mode for the display, in case multiple modes are
-		provided. When omitted, assume the first node is the native.
-
-timing subnode
---------------
-
-required properties:
- - hactive, vactive: display resolution
- - hfront-porch, hback-porch, hsync-len: horizontal display timing parameters
-   in pixels
-   vfront-porch, vback-porch, vsync-len: vertical display timing parameters in
-   lines
- - clock-frequency: display clock in Hz
-
-optional properties:
- - hsync-active: hsync pulse is active low/high/ignored
- - vsync-active: vsync pulse is active low/high/ignored
- - de-active: data-enable pulse is active low/high/ignored
- - pixelclk-active: with
-			- active high = drive pixel data on rising edge/
-					sample data on falling edge
-			- active low  = drive pixel data on falling edge/
-					sample data on rising edge
-			- ignored     = ignored
- - syncclk-active: with
-			- active high = drive sync on rising edge/
-					sample sync on falling edge of pixel
-					clock
-			- active low  = drive sync on falling edge/
-					sample sync on rising edge of pixel
-					clock
-			- omitted     = same configuration as pixelclk-active
- - interlaced (bool): boolean to enable interlaced mode
- - doublescan (bool): boolean to enable doublescan mode
- - doubleclk (bool): boolean to enable doubleclock mode
-
-All the optional properties that are not bool follow the following logic:
-    <1>: high active
-    <0>: low active
-    omitted: not used on hardware
-
-There are different ways of describing the capabilities of a display. The
-devicetree representation corresponds to the one commonly found in datasheets
-for displays. If a display supports multiple signal timings, the native-mode
-can be specified.
-
-The parameters are defined as:
-
-  +----------+-------------------------------------+----------+-------+
-  |          |        ^                            |          |       |
-  |          |        |vback_porch                 |          |       |
-  |          |        v                            |          |       |
-  +----------#######################################----------+-------+
-  |          #        ^                            #          |       |
-  |          #        |                            #          |       |
-  |  hback   #        |                            #  hfront  | hsync |
-  |   porch  #        |       hactive              #  porch   |  len  |
-  |<-------->#<-------+--------------------------->#<-------->|<----->|
-  |          #        |                            #          |       |
-  |          #        |vactive                     #          |       |
-  |          #        |                            #          |       |
-  |          #        v                            #          |       |
-  +----------#######################################----------+-------+
-  |          |        ^                            |          |       |
-  |          |        |vfront_porch                |          |       |
-  |          |        v                            |          |       |
-  +----------+-------------------------------------+----------+-------+
-  |          |        ^                            |          |       |
-  |          |        |vsync_len                   |          |       |
-  |          |        v                            |          |       |
-  +----------+-------------------------------------+----------+-------+
-
-Note: In addition to being used as subnode(s) of display-timings, the timing
-      subnode may also be used on its own. This is appropriate if only one mode
-      need be conveyed. In this case, the node should be named 'panel-timing'.
-
-
-Example:
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 1080p24 {
-			/* 1920x1080p24 */
-			clock-frequency = <52000000>;
-			hactive = <1920>;
-			vactive = <1080>;
-			hfront-porch = <25>;
-			hback-porch = <25>;
-			hsync-len = <25>;
-			vback-porch = <2>;
-			vfront-porch = <2>;
-			vsync-len = <2>;
-			hsync-active = <1>;
-		};
-	};
-
-Every required property also supports the use of ranges, so the commonly used
-datasheet description with minimum, typical and maximum values can be used.
-
-Example:
-
-	timing1: timing {
-		/* 1920x1080p24 */
-		clock-frequency = <148500000>;
-		hactive = <1920>;
-		vactive = <1080>;
-		hsync-len = <0 44 60>;
-		hfront-porch = <80 88 95>;
-		hback-porch = <100 148 160>;
-		vfront-porch = <0 4 6>;
-		vback-porch = <0 36 50>;
-		vsync-len = <0 5 6>;
-	};
+See display-timings.yaml in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
new file mode 100644
index 000000000000..6d30575819d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: display timings bindings
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  A display panel may be able to handle several display timings,
+  with different resolutions.
+  The display-timings node makes it possible to specify the timings
+  and to specify the timing that is native for the display.
+
+properties:
+  $nodename:
+    const: display-timings
+
+  native-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The default display timing is the one specified as native-mode.
+      If no native-mode is specified then the first node is assumed
+      to be the native mode.
+
+patternProperties:
+  "^timing":
+    type: object
+    $ref: panel-timing.yaml#
+
+additionalProperties: false
+
+examples:
+  - |+
+
+    /*
+     * Example that specifies panel timing using minimum, typical,
+     * maximum values as commonly used in datasheet description.
+     * timing1 is the native-mode.
+     */
+    display-timings {
+        native-mode = <&timing1>;
+        timing0 {
+            /* 1920x1080p24 */
+            clock-frequency = <148500000>;
+            hactive = <1920>;
+            vactive = <1080>;
+            hsync-len = <0 44 60>;
+            hfront-porch = <80 88 95>;
+            hback-porch = <100 148 160>;
+            vfront-porch = <0 4 6>;
+            vback-porch = <0 36 50>;
+            vsync-len = <0 5 6>;
+        };
+        timing1 {
+            /* 1920x1080p24 */
+            clock-frequency = <52000000>;
+            hactive = <1920>;
+            vactive = <1080>;
+            hfront-porch = <25>;
+            hback-porch = <25>;
+            hsync-len = <0 25 25>;
+            vback-porch = <2>;
+            vfront-porch = <2>;
+            vsync-len = <2>;
+            hsync-active = <1>;
+            pixelclk-active = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt b/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt
deleted file mode 100644
index fbf5dcd15661..000000000000
--- a/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel
-
-Required properties:
-- compatible: should be "dlc,dlc1010gig"
-- power-supply: See simple-panel.txt
-
-Optional properties:
-- enable-gpios: See simple-panel.txt
-- backlight: See simple-panel.txt
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml b/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml
new file mode 100644
index 000000000000..80deedc01c7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ebbg,ft8719.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EBBG FT8719 MIPI-DSI LCD panel
+
+maintainers:
+  - Joel Selvaraj <jo@jsfamily.in>
+
+description: |
+  The FT8719 panel from EBBG is a FHD+ LCD display panel with a resolution
+  of 1080x2246. It is a video mode DSI panel. The backlight is managed
+  through the QCOM WLED driver.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: ebbg,ft8719
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel of the peripheral
+
+  vddio-supply:
+    description: power IC supply regulator
+
+  vddpos-supply:
+    description: positive boost supply regulator
+
+  vddneg-supply:
+    description: negative boost supply regulator
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vddpos-supply
+  - vddneg-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      panel@0 {
+        compatible = "ebbg,ft8719";
+        reg = <0>;
+
+        vddio-supply = <&vreg_l14a_1p88>;
+        vddpos-supply = <&lab>;
+        vddneg-supply = <&ibb>;
+
+        reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+        backlight = <&pmi8998_wled>;
+
+        port {
+          ebbg_ft8719_in_0: endpoint {
+            remote-endpoint = <&dsi0_out>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/edt,et-series.txt b/Documentation/devicetree/bindings/display/panel/edt,et-series.txt
deleted file mode 100644
index b7ac1c725f97..000000000000
--- a/Documentation/devicetree/bindings/display/panel/edt,et-series.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Emerging Display Technology Corp. Displays
-==========================================
-
-
-Display bindings for EDT Display Technology Corp. Displays which are
-compatible with the simple-panel binding, which is specified in
-simple-panel.txt
-
-3,5" QVGA TFT Panels
---------------------
-+-----------------+---------------------+-------------------------------------+
-| Identifier      | compatbile          | description                         |
-+=================+=====================+=====================================+
-| ET035012DM6     | edt,et035012dm6     | 3.5" QVGA TFT LCD panel             |
-+-----------------+---------------------+-------------------------------------+
-
-4,3" WVGA TFT Panels
---------------------
-
-+-----------------+---------------------+-------------------------------------+
-| Identifier      | compatbile          | description                         |
-+=================+=====================+=====================================+
-| ETM0430G0DH6    | edt,etm0430g0dh6    | 480x272 TFT Display                 |
-+-----------------+---------------------+-------------------------------------+
-
-5,7" WVGA TFT Panels
---------------------
-
-+-----------------+---------------------+-------------------------------------+
-| Identifier      | compatbile          | description                         |
-+=================+=====================+=====================================+
-| ET057090DHU     | edt,et057090dhu     | 5.7" VGA TFT LCD panel              |
-+-----------------+---------------------+-------------------------------------+
-
-
-7,0" WVGA TFT Panels
---------------------
-
-+-----------------+---------------------+-------------------------------------+
-| Identifier      | compatbile          | description                         |
-+=================+=====================+=====================================+
-| ETM0700G0DH6    | edt,etm070080dh6    | WVGA TFT Display with capacitive    |
-|                 | edt,etm0700g0dh6    | Touchscreen                         |
-+-----------------+---------------------+-------------------------------------+
-| ETM0700G0BDH6   | edt,etm070080bdh6   | Same as ETM0700G0DH6 but with       |
-|                 |                     | inverted pixel clock.               |
-+-----------------+---------------------+-------------------------------------+
-| ETM0700G0EDH6   | edt,etm070080edh6   | Same display as the ETM0700G0BDH6,  |
-|                 |                     | but with changed Hardware for the   |
-|                 |                     | backlight and the touch interface   |
-+-----------------+---------------------+-------------------------------------+
-| ET070080DH6     | edt,etm070080dh6    | Same timings as the ETM0700G0DH6,   |
-|                 |                     | but with resistive touch.           |
-+-----------------+---------------------+-------------------------------------+
-
diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
new file mode 100644
index 000000000000..7adb83e2e8d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/elida,kd35t133.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elida KD35T133 3.5in 320x480 DSI panel
+
+maintainers:
+  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: elida,kd35t133
+  reg: true
+  backlight: true
+  reset-gpios: true
+  iovcc-supply:
+    description: regulator that supplies the iovcc voltage
+  vdd-supply:
+    description: regulator that supplies the vdd voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - iovcc-supply
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "elida,kd35t133";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vdd-supply = <&vcc3v3_lcd>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/evervision,vgg804821.txt b/Documentation/devicetree/bindings/display/panel/evervision,vgg804821.txt
deleted file mode 100644
index 82d22e191ac3..000000000000
--- a/Documentation/devicetree/bindings/display/panel/evervision,vgg804821.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel
-
-Required properties:
-- compatible: should be "evervision,vgg804821"
-- power-supply: See simple-panel.txt
-
-Optional properties:
-- backlight: See simple-panel.txt
-- enable-gpios: See simple-panel.txt
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
new file mode 100644
index 000000000000..81adb82f061d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feixin,k101-im2ba02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feixin K101 IM2BA02 10.1" MIPI-DSI LCD panel
+
+maintainers:
+  - Icenowy Zheng <icenowy@aosc.io>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: feixin,k101-im2ba02
+  reg: true
+  backlight: true
+  reset-gpios: true
+  avdd-supply:
+    description: regulator that supplies the AVDD voltage
+  dvdd-supply:
+    description: regulator that supplies the DVDD voltage
+  cvdd-supply:
+    description: regulator that supplies the CVDD voltage
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+  - cvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "feixin,k101-im2ba02";
+            reg = <0>;
+            avdd-supply = <&reg_dc1sw>;
+            dvdd-supply = <&reg_dc1sw>;
+            cvdd-supply = <&reg_ldo_io1>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
deleted file mode 100644
index 82caa7b65ae8..000000000000
--- a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
-
-Required properties:
-- compatible: must be "feiyang,fy07024di26a30d"
-- reg: DSI virtual channel used by that screen
-- avdd-supply: analog regulator dc1 switch
-- dvdd-supply: 3v3 digital regulator
-- reset-gpios: a GPIO phandle for the reset pin
-
-Optional properties:
-- backlight: phandle for the backlight control.
-
-panel@0 {
-	compatible = "feiyang,fy07024di26a30d";
-	reg = <0>;
-	avdd-supply = <&reg_dc1sw>;
-	dvdd-supply = <&reg_dldo2>;
-	reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
-	backlight = <&backlight>;
-};
diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
new file mode 100644
index 000000000000..1cf84c8dd85e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feiyang,fy07024di26a30d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: feiyang,fy07024di26a30d
+
+  reg:
+    description: DSI virtual channel used by that screen
+    maxItems: 1
+
+  avdd-supply:
+    description: analog regulator dc1 switch
+
+  dvdd-supply:
+    description: 3v3 digital regulator
+
+  reset-gpios: true
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "feiyang,fy07024di26a30d";
+            reg = <0>;
+            avdd-supply = <&reg_dc1sw>;
+            dvdd-supply = <&reg_dldo2>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+            backlight = <&backlight>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt b/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt
deleted file mode 100644
index b47f9d87bc19..000000000000
--- a/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Foxlink Group 5" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "foxlink,fl500wvr00-a0t"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/friendlyarm,hd702e.txt b/Documentation/devicetree/bindings/display/panel/friendlyarm,hd702e.txt
deleted file mode 100644
index 6c9156fc3478..000000000000
--- a/Documentation/devicetree/bindings/display/panel/friendlyarm,hd702e.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-FriendlyELEC HD702E 800x1280 LCD panel
-
-HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280
-resolution. It has built in Goodix, GT9271 captive touchscreen
-with backlight adjustable via PWM.
-
-Required properties:
-- compatible: should be "friendlyarm,hd702e"
-- power-supply: regulator to provide the supply voltage
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Optional nodes:
-- Video port for LCD panel input.
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-Example:
-
-	panel {
-		compatible ="friendlyarm,hd702e", "simple-panel";
-		backlight = <&backlight>;
-		power-supply = <&vcc3v3_sys>;
-
-		port {
-			panel_in_edp: endpoint {
-				remote-endpoint = <&edp_out_panel>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt b/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt
deleted file mode 100644
index 24b0b624434b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "giantplus,gpg48273qs5"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt b/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt
deleted file mode 100644
index 7da1d5c038ff..000000000000
--- a/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "hannstar,hsd070pww1"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt b/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt
deleted file mode 100644
index 8270319a99de..000000000000
--- a/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel
-
-Required properties:
-- compatible: should be "hannstar,hsd100pxn1"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt b/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt
deleted file mode 100644
index 04caaae19af6..000000000000
--- a/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
-
-Required properties:
-- compatible: should be "hit,tx23d38vm0caa"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml
new file mode 100644
index 000000000000..7e7a8362b951
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9163.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9163 display panels device tree bindings
+
+maintainers:
+  - Daniel Mack <daniel@zonque.org>
+
+description:
+  This binding is for display panels using an Ilitek ILI9163 controller in SPI
+  mode.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - newhaven,1.8-128160EF
+      - const: ilitek,ili9163
+
+  spi-max-frequency:
+    maximum: 32000000
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX)
+
+  backlight: true
+  reg: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight: backlight {
+            compatible = "gpio-backlight";
+            gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            display@0 {
+                    compatible = "newhaven,1.8-128160EF", "ilitek,ili9163";
+                    reg = <0>;
+                    spi-max-frequency = <32000000>;
+                    dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+                    rotation = <180>;
+                    backlight = <&backlight>;
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt
deleted file mode 100644
index 3d5ce6ad6ec7..000000000000
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Ilitek ILI9322 TFT panel driver with SPI control bus
-
-This is a driver for 320x240 TFT panels, accepting a variety of input
-streams that get adapted and scaled to the panel. The panel output has
-960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
-VCOMH outputs.
-
-Required properties:
-  - compatible: "dlink,dir-685-panel", "ilitek,ili9322"
-    (full system-specific compatible is always required to look up configuration)
-  - reg: address of the panel on the SPI bus
-
-Optional properties:
-  - vcc-supply: core voltage supply, see regulator/regulator.txt
-  - iovcc-supply: voltage supply for the interface input/output signals,
-    see regulator/regulator.txt
-  - vci-supply: voltage supply for analog parts, see regulator/regulator.txt
-  - reset-gpios: a GPIO spec for the reset pin, see gpio/gpio.txt
-
-  The following optional properties only apply to RGB and YUV input modes and
-  can be omitted for BT.656 input modes:
-
-  - pixelclk-active: see display/panel/display-timing.txt
-  - de-active: see display/panel/display-timing.txt
-  - hsync-active: see display/panel/display-timing.txt
-  - vsync-active: see display/panel/display-timing.txt
-
-The panel must obey the rules for a SPI slave device as specified in
-spi/spi-bus.txt
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in
-media/video-interfaces.txt. This node should describe panel's video bus.
-
-Example:
-
-panel: display@0 {
-	compatible = "dlink,dir-685-panel", "ilitek,ili9322";
-	reg = <0>;
-	vcc-supply = <&vdisp>;
-	iovcc-supply = <&vdisp>;
-	vci-supply = <&vdisp>;
-
-	port {
-		panel_in: endpoint {
-			remote-endpoint = <&display_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
new file mode 100644
index 000000000000..7d221ef35443
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9322.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9322 TFT panel driver with SPI control bus
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This is a driver for 320x240 TFT panels, accepting a variety of input
+  streams that get adapted and scaled to the panel. The panel output has
+  960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
+  VCOMH outputs.
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - dlink,dir-685-panel
+      - const: ilitek,ili9322
+
+  reset-gpios: true
+  port: true
+
+  vcc-supply:
+    description: Core voltage supply
+
+  iovcc-supply:
+    description: Voltage supply for the interface input/output signals
+
+  vci-supply:
+    description: Voltage supply for analog parts
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: display@0 {
+            compatible = "dlink,dir-685-panel", "ilitek,ili9322";
+            reg = <0>;
+            vcc-supply = <&vdisp>;
+            iovcc-supply = <&vdisp>;
+            vci-supply = <&vdisp>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
new file mode 100644
index 000000000000..99e0cb9440cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9341.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek-9341 Display Panel
+
+maintainers:
+  - Dillon Min <dillon.minfei@gmail.com>
+
+description: |
+  Ilitek ILI9341 TFT panel driver with SPI control bus
+  This is a driver for 320x240 TFT panels, accepting a rgb input
+  streams with 16 bits or 18 bits.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adafruit,yx240qv29
+          # ili9341 240*320 Color on stm32f429-disco board
+          - st,sf-tc240t-9370-t
+          - canaan,kd233-tft
+      - const: ilitek,ili9341
+
+  reg: true
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX) of this DBI panel
+
+  spi-3wire: true
+
+  spi-max-frequency:
+    const: 10000000
+
+  port: true
+
+  vci-supply:
+    description: Analog voltage supply (2.5 .. 3.3V)
+
+  vddi-supply:
+    description: Voltage supply for interface logic (1.65 .. 3.3 V)
+
+  vddi-led-supply:
+    description: Voltage supply for the LED driver (1.65 .. 3.3 V)
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,sf-tc240t-9370-t
+then:
+  required:
+    - port
+
+examples:
+  - |+
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel: display@0 {
+            compatible = "st,sf-tc240t-9370-t",
+                         "ilitek,ili9341";
+            reg = <0>;
+            spi-3wire;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpiod 13 0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+        display@1{
+            compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+            reg = <1>;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+            rotation = <270>;
+            backlight = <&backlight>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt
deleted file mode 100644
index 4a041acb4e18..000000000000
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Ilitek ILI9881c based MIPI-DSI panels
-
-Required properties:
-  - compatible: must be "ilitek,ili9881c" and one of:
-    * "bananapi,lhr050h41"
-  - reg: DSI virtual channel used by that screen
-  - power-supply: phandle to the power regulator
-  - reset-gpios: a GPIO phandle for the reset pin
-
-Optional properties:
-  - backlight: phandle to the backlight used
-
-Example:
-panel@0 {
-	compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
-	reg = <0>;
-	power-supply = <&reg_display>;
-	reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
-	backlight = <&pwm_bl>;
-};
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
new file mode 100644
index 000000000000..c5d1df680858
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9881c based MIPI-DSI panels
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - bananapi,lhr050h41
+          - feixin,k101-im2byl02
+          - wanchanglong,w552946aba
+      - const: ilitek,ili9881c
+
+  backlight: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - power-supply
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+            reg = <0>;
+            power-supply = <&reg_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&pwm_bl>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt b/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt
deleted file mode 100644
index 4104226b61bc..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Innolux AT043TN24 4.3" WQVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,at043tn24"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt b/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt
deleted file mode 100644
index 3e10cd782491..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Innolux AT070TN92 7.0" WQVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,at070tn92"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
index a69681e724cb..566e11f6bfc0 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
+++ b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
@@ -11,15 +11,26 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: innolux,ee101ia-01d
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: innolux,ee101ia-01d
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   backlight: true
+  data-mapping: true
   enable-gpios: true
   power-supply: true
   width-mm: true
@@ -27,5 +38,13 @@ properties:
   panel-timing: true
   port: true
 
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
 additionalProperties: false
 ...
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
new file mode 100644
index 000000000000..72788e3e6c59
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,ej030na.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux EJ030NA 3.0" (320x480 pixels) 24-bit TFT LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: innolux,ej030na
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "innolux,ej030na";
+            reg = <0>;
+
+            spi-max-frequency = <10000000>;
+
+            reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+            power-supply = <&lcd_power>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt
deleted file mode 100644
index 7c234cf68e11..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,g070y2-l01"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt
deleted file mode 100644
index 9e7590465227..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel
-
-Required properties:
-- compatible: should be "innolux,g101ice-l01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt
deleted file mode 100644
index 2743b07cd2f2..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,g121i1-l01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt b/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt
deleted file mode 100644
index 649744620ae1..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,g121x1-l03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt b/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt
deleted file mode 100644
index 081bb939ed31..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,n116bge"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt b/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt
deleted file mode 100644
index 7825844aafdf..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-InnoLux 15.6" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,n156bge-l21"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
deleted file mode 100644
index 3ab8c7412cf6..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,p079zca"
-- reg: DSI virtual channel of the peripheral
-- power-supply: phandle of the regulator that provides the supply voltage
-- enable-gpios: panel enable gpio
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
-
-	&mipi_dsi {
-		panel@0 {
-			compatible = "innolux,p079zca";
-			reg = <0>;
-			power-supply = <...>;
-			backlight = <&backlight>;
-			enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
deleted file mode 100644
index d1cab3a8f0fb..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,p097pfg"
-- reg: DSI virtual channel of the peripheral
-- avdd-supply: phandle of the regulator that provides positive voltage
-- avee-supply: phandle of the regulator that provides negative voltage
-- enable-gpios: panel enable gpio
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
-
-	&mipi_dsi {
-		panel@0 {
-			compatible = "innolux,p079zca";
-			reg = <0>;
-			avdd-supply = <...>;
-			avee-supply = <...>;
-			backlight = <&backlight>;
-			enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml
new file mode 100644
index 000000000000..5a5f071627fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,p097pfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
+
+maintainers:
+  - Lin Huang <hl@rock-chips.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: innolux,p097pfg
+
+  backlight: true
+  enable-gpios: true
+  reg: true
+
+  avdd-supply:
+    description: The regulator that provides positive voltage
+
+  avee-supply:
+    description: The regulator that provides negative voltage
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - avee-supply
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "innolux,p097pfg";
+            reg = <0>;
+            avdd-supply = <&avdd>;
+            avee-supply = <&avee>;
+            backlight = <&backlight>;
+            enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
deleted file mode 100644
index 513f03466aba..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-Required properties:
-- compatible: should be "innolux,p120zdg-bf1"
-- power-supply: regulator to provide the supply voltage
-
-Optional properties:
-- enable-gpios: GPIO pin to enable or disable the panel
-- backlight: phandle of the backlight device attached to the panel
-- no-hpd: If HPD isn't hooked up; add this property.
-
-Example:
-	panel_edp: panel-edp {
-		compatible = "innolux,p120zdg-bf1";
-		enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
-		power-supply = <&pm8916_l2>;
-		backlight = <&backlight>;
-		no-hpd;
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml
new file mode 100644
index 000000000000..243dac2416f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,p120zdg-bf1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
+
+maintainers:
+  - Sandeep Panda <spanda@codeaurora.org>
+  - Douglas Anderson <dianders@chromium.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: innolux,p120zdg-bf1
+
+  enable-gpios: true
+  power-supply: true
+  backlight: true
+  no-hpd: true
+
+required:
+  - compatible
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    panel_edp: panel-edp {
+        compatible = "innolux,p120zdg-bf1";
+        enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
+        power-supply = <&pm8916_l2>;
+        backlight = <&backlight>;
+        no-hpd;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt b/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt
deleted file mode 100644
index 824f87f1526d..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
-
-Required properties:
-- compatible: should be "innolux,zj070na-01p"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
deleted file mode 100644
index 4989c91d505f..000000000000
--- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-JDI model LT070ME05000 1200x1920 7" DSI Panel
-
-Required properties:
-- compatible: should be "jdi,lt070me05000"
-- vddp-supply: phandle of the regulator that provides the supply voltage
-  Power IC supply (3-5V)
-- iovcc-supply: phandle of the regulator that provides the supply voltage
-  IOVCC , power supply for LCM (1.8V)
-- enable-gpios: phandle of gpio for enable line
-  LED_EN, LED backlight enable, High active
-- reset-gpios: phandle of gpio for reset line
-  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
-  XRES, Reset, Low active
-- dcdc-en-gpios: phandle of the gpio for power ic line
-  Power IC supply enable, High active
-
-Example:
-
-	dsi0: qcom,mdss_dsi@4700000 {
-		panel@0 {
-			compatible = "jdi,lt070me05000";
-			reg = <0>;
-
-			vddp-supply = <&pm8921_l17>;
-			iovcc-supply = <&pm8921_lvs7>;
-
-			enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
-			reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
-			dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
new file mode 100644
index 000000000000..63c82a4378ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+maintainers:
+  - Vinay Simha BN <simhavcs@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: jdi,lt070me05000
+
+  enable-gpios: true
+  reg: true
+  reset-gpios: true
+
+  vddp-supply:
+    description: |
+      The regulator that provides the supply voltage Power IC supply (3-5V)
+
+  iovcc-supply:
+    description: |
+      The regulator that provides the supply voltage IOVCC,
+      power supply for LCM (1.8V)
+
+  dcdc-en-gpios:
+    maxItems: 1
+    description: |
+      phandle of the gpio for power ic line
+      Power IC supply enable, High active
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vddp-supply
+  - iovcc-supply
+  - enable-gpios
+  - reset-gpios
+  - dcdc-en-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "jdi,lt070me05000";
+            reg = <0>;
+
+            vddp-supply = <&pm8921_l17>;
+            iovcc-supply = <&pm8921_lvs7>;
+
+            enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+            dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
deleted file mode 100644
index fa9596082e44..000000000000
--- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
-
-Required properties:
-- compatible: should be "kingdisplay,kd035g6-54nt"
-- power-supply: See panel-common.txt
-- reset-gpios: See panel-common.txt
-
-Optional properties:
-- backlight: see panel-common.txt
-
-The generic bindings for the SPI slaves documented in [1] also apply.
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [2]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
-[2]: Documentation/devicetree/bindings/graph.txt
-
-Example:
-
-&spi {
-	panel@0 {
-		compatible = "kingdisplay,kd035g6-54nt";
-		reg = <0>;
-
-		spi-max-frequency = <3125000>;
-		spi-3wire;
-		spi-cs-high;
-
-		reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
-
-		backlight = <&backlight>;
-		power-supply = <&ldo6>;
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&panel_output>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
new file mode 100644
index 000000000000..b4be9bd8ddde
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/kingdisplay,kd035g6-54nt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: kingdisplay,kd035g6-54nt
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "kingdisplay,kd035g6-54nt";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+            spi-3wire;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&ldo6>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt
deleted file mode 100644
index cfefff688614..000000000000
--- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
-
-Required properties:
-- compatible: should be "kingdisplay,kd097d04"
-- reg: DSI virtual channel of the peripheral
-- power-supply: phandle of the regulator that provides the supply voltage
-- enable-gpios: panel enable gpio
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
-
-	&mipi_dsi {
-		panel@0 {
-			compatible = "kingdisplay,kd097d04";
-			reg = <0>;
-			power-supply = <...>;
-			backlight = <&backlight>;
-			enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt
deleted file mode 100644
index be7ac666807b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
-
-Required properties:
-- compatible: should be "koe,tx14d24vm1bpa"
-- backlight: phandle of the backlight device attached to the panel
-- power-supply: single regulator to provide the supply voltage
-
-Required nodes:
-- port: Parallel port mapping to connect this display
-
-This panel needs single power supply voltage. Its backlight is conntrolled
-via PWM signal.
-
-Example:
---------
-
-Example device-tree definition when connected to iMX53 based board
-
-	lcd_panel: lcd-panel {
-		compatible = "koe,tx14d24vm1bpa";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-Then one needs to extend the dispX node:
-
-	lcd_display: disp1 {
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt
deleted file mode 100644
index 6a036ede3e28..000000000000
--- a/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-Required properties:
-- compatible: should be "koe,tx31d200vm0baa"
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Optional nodes:
-- Video port for LVDS panel input.
-
-Example:
-	panel {
-		compatible = "koe,tx31d200vm0baa";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt b/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt
deleted file mode 100644
index a8e940fe731e..000000000000
--- a/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel
-
-Required properties:
-- compatible: should be "kyo,tcg121xglp"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
new file mode 100644
index 000000000000..ebdca5f5a001
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: leadtek,ltk035c5444t
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "leadtek,ltk035c5444t";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
new file mode 100644
index 000000000000..3f6efbb942da
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel
+
+maintainers:
+  - Quentin Schulz <quentin.schulz@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - leadtek,ltk050h3146w
+      - leadtek,ltk050h3146w-a2
+  reg: true
+  backlight: true
+  reset-gpios: true
+  iovcc-supply:
+    description: regulator that supplies the iovcc voltage
+  vci-supply:
+    description: regulator that supplies the vci voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - iovcc-supply
+  - vci-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "leadtek,ltk050h3146w";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vci-supply = <&vcc3v3_lcd>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
index a614644c9849..c5944b4d636c 100644
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -19,9 +19,9 @@ properties:
   backlight: true
   reset-gpios: true
   iovcc-supply:
-     description: regulator that supplies the iovcc voltage
+    description: regulator that supplies the iovcc voltage
   vcc-supply:
-     description: regulator that supplies the vcc voltage
+    description: regulator that supplies the vcc voltage
 
 required:
   - compatible
@@ -34,10 +34,9 @@ additionalProperties: false
 
 examples:
   - |
-    dsi@ff450000 {
+    dsi {
         #address-cells = <1>;
         #size-cells = <0>;
-        reg = <0xff450000 0x1000>;
 
         panel@0 {
             compatible = "leadtek,ltk500hd1829";
diff --git a/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt b/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt
deleted file mode 100644
index 74ee7ea6b493..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "lemaker,bl035-rgb-002"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lg,acx467akm-7.txt b/Documentation/devicetree/bindings/display/panel/lg,acx467akm-7.txt
deleted file mode 100644
index fc1e1b325e49..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lg,acx467akm-7.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
-
-Required properties:
-- compatible: must be "lg,acx467akm-7"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt b/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt
deleted file mode 100644
index a7588e5259cf..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-LG 7" (800x480 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,lb070wv8"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.txt b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.txt
deleted file mode 100644
index 5e649cb9aa1a..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-LG Corporation 7" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,ld070wx3-sl01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lg4573.txt b/Documentation/devicetree/bindings/display/panel/lg,lg4573.txt
deleted file mode 100644
index 824441f4e95a..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lg,lg4573.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-LG LG4573 TFT Liquid Crystal Display with SPI control bus
-
-Required properties:
-  - compatible: "lg,lg4573"
-  - reg: address of the panel on the SPI bus
-
-The panel must obey rules for SPI slave device specified in document [1].
-
-[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
-	lcd_panel: display@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lg,lg4573";
-		spi-max-frequency = <10000000>;
-		reg = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
new file mode 100644
index 000000000000..ee357e139ac0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,lg4573.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG LG4573 TFT Liquid Crystal Display with SPI control bus
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Heiko Schocher <hs@denx.de>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: lg,lg4573
+
+  reg: true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lcd_panel: display@0 {
+            compatible = "lg,lg4573";
+            spi-max-frequency = <10000000>;
+            reg = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lh500wx1-sd03.txt b/Documentation/devicetree/bindings/display/panel/lg,lh500wx1-sd03.txt
deleted file mode 100644
index a04fd2b2e73d..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lg,lh500wx1-sd03.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-LG Corporation 5" HD TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,lh500wx1-sd03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt b/Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt
deleted file mode 100644
index b9877acad012..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,lp079qx1-sp0v"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt b/Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt
deleted file mode 100644
index 42141516f078..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-LG 9.7" (2048x1536 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,lp097qx1-spa1"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp120up1.txt b/Documentation/devicetree/bindings/display/panel/lg,lp120up1.txt
deleted file mode 100644
index 8c5de692c55c..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lg,lp120up1.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-LG 12.0" (1920x1280 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,lp120up1"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt b/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt
deleted file mode 100644
index 9f262e0c5a2e..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-LG 12.9" (2560x1700 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "lg,lp129qe"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.txt b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.txt
deleted file mode 100644
index 1a1e653e5407..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-LG.Philips LB035Q02 Panel
-=========================
-
-Required properties:
-- compatible: "lgphilips,lb035q02"
-- enable-gpios: panel enable gpio
-
-Optional properties:
-- label: a symbolic name for the panel
-
-Required nodes:
-- Video port for DPI input
-
-Example
--------
-
-lcd-panel: panel@0 {
-	compatible = "lgphilips,lb035q02";
-	reg = <0>;
-	spi-max-frequency = <100000>;
-	spi-cpol;
-	spi-cpha;
-
-	label = "lcd";
-
-	enable-gpios = <&gpio7 7 0>;
-
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&dpi_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
new file mode 100644
index 000000000000..628c4b898111
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lgphilips,lb035q02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG.Philips LB035Q02 Panel
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: lgphilips,lb035q02
+
+  label: true
+  enable-gpios: true
+  port: true
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - enable-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: panel@0 {
+            compatible = "lgphilips,lb035q02";
+            reg = <0>;
+            spi-max-frequency = <100000>;
+            spi-cpol;
+            spi-cpha;
+
+            label = "lcd";
+
+            enable-gpios = <&gpio7 7 0>;
+
+            port {
+                lcd_in: endpoint {
+                    remote-endpoint = <&dpi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml
deleted file mode 100644
index d0083301acbe..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lvds.yaml
+++ /dev/null
@@ -1,107 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/panel/lvds.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: LVDS Display Panel
-
-maintainers:
-  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-  - Thierry Reding <thierry.reding@gmail.com>
-
-description: |+
-  LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
-  incompatible data link layers have been used over time to transmit image data
-  to LVDS panels. This bindings supports display panels compatible with the
-  following specifications.
-
-  [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
-  1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
-  [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
-  Semiconductor
-  [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
-  Electronics Standards Association (VESA)
-
-  Device compatible with those specifications have been marketed under the
-  FPD-Link and FlatLink brands.
-
-allOf:
-  - $ref: panel-common.yaml#
-
-properties:
-  compatible:
-    contains:
-      const: panel-lvds
-    description:
-      Shall contain "panel-lvds" in addition to a mandatory panel-specific
-      compatible string defined in individual panel bindings. The "panel-lvds"
-      value shall never be used on its own.
-
-  data-mapping:
-    enum:
-      - jeida-18
-      - jeida-24
-      - vesa-24
-    description: |
-      The color signals mapping order.
-
-      LVDS data mappings are defined as follows.
-
-      - "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and
-        [VESA] specifications. Data are transferred as follows on 3 LVDS lanes.
-
-      Slot	    0       1       2       3       4       5       6
-            ________________                         _________________
-      Clock	                \_______________________/
-              ______  ______  ______  ______  ______  ______  ______
-      DATA0	><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
-      DATA1	><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
-      DATA2	><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
-
-      - "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI]
-        specifications. Data are transferred as follows on 4 LVDS lanes.
-
-      Slot	    0       1       2       3       4       5       6
-            ________________                         _________________
-      Clock	                \_______________________/
-              ______  ______  ______  ______  ______  ______  ______
-      DATA0	><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__><
-      DATA1	><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__><
-      DATA2	><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__><
-      DATA3	><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
-
-      - "vesa-24" - 24-bit data mapping compatible with the [VESA] specification.
-        Data are transferred as follows on 4 LVDS lanes.
-
-      Slot	    0       1       2       3       4       5       6
-            ________________                         _________________
-      Clock	                \_______________________/
-              ______  ______  ______  ______  ______  ______  ______
-      DATA0	><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
-      DATA1	><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
-      DATA2	><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
-      DATA3	><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
-
-      Control signals are mapped as follows.
-
-      CTL0: HSync
-      CTL1: VSync
-      CTL2: Data Enable
-      CTL3: 0
-
-  data-mirror:
-    type: boolean
-    description:
-      If set, reverse the bit order described in the data mappings below on all
-      data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
-
-required:
-  - compatible
-  - data-mapping
-  - width-mm
-  - height-mm
-  - panel-timing
-  - port
-
-...
diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
new file mode 100644
index 000000000000..a4b8569ab81c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mantix MLAF057WE51-X 5.7" 720x1440 TFT LCD panel
+
+maintainers:
+  - Guido Günther <agx@sigxcpu.org>
+
+description:
+  Mantix MLAF057WE51 X is a 720x1440 TFT LCD panel connected using
+  a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mantix,mlaf057we51-x
+      - ys,ys57pss36bh5gq
+
+  port: true
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  avdd-supply:
+    description: Positive analog power supply
+
+  avee-supply:
+    description: Negative analog power supply
+
+  vddi-supply:
+    description: 1.8V I/O voltage supply
+
+  reset-gpios: true
+
+  mantix,tp-rstn-gpios:
+    maxItems: 1
+    description: second reset line that triggers DSI config load
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - avee-supply
+  - vddi-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "mantix,mlaf057we51-x";
+            reg = <0>;
+            avdd-supply = <&reg_avdd>;
+            avee-supply = <&reg_avee>;
+            vddi-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+            mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt
deleted file mode 100644
index 7d8f6eeef6d9..000000000000
--- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "mitsubishi,aa070mc01-ca1"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
index b5e7ee230fa6..5cf3c588f46d 100644
--- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa104xd12
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: mitsubishi,aa104xd12
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   vcc-supply:
     description: Reference to the regulator powering the panel VCC pins.
@@ -39,6 +49,11 @@ additionalProperties: false
 required:
   - compatible
   - vcc-supply
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
index 977c50a85b67..54750cc5440d 100644
--- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa121td01
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: mitsubishi,aa121td01
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   vcc-supply:
     description: Reference to the regulator powering the panel VCC pins.
@@ -39,6 +49,11 @@ additionalProperties: false
 required:
   - compatible
   - vcc-supply
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt b/Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt
deleted file mode 100644
index 71cbc49ecfab..000000000000
--- a/Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel
-
-Required properties:
-- compatible: should be "nec,nl12880bc20-05"
-- power-supply: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt b/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt
deleted file mode 100644
index 8e1914d1edb8..000000000000
--- a/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-NEC LCD Technologies,Ltd. WQVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "nec,nl4827hc19-05b"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt b/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt
deleted file mode 100644
index c6d06b5eab51..000000000000
--- a/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Netron-DY E231732 7.0" WSVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "netron-dy,e231732"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt b/Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt
deleted file mode 100644
index e78292b1a131..000000000000
--- a/Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Newhaven Display International 480 x 272 TFT LCD panel
-
-Required properties:
-- compatible: should be "newhaven,nhd-4.3-480272ef-atxl"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt b/Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt
deleted file mode 100644
index 1a639fd8778d..000000000000
--- a/Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel
-
-Required properties:
-- compatible: should be "nlt,nl192108ac18-02d"
-- power-supply: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
new file mode 100644
index 000000000000..bc92928c805b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35510.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35510-based display panels
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: hydis,hva40wv1
+      - const: novatek,nt35510
+    description: This indicates the panel manufacturer of the panel
+      that is in turn using the NT35510 panel driver. The compatible
+      string determines how the NT35510 panel driver shall be configured
+      to work with the indicated panel. The novatek,nt35510 compatible shall
+      always be provided as a fallback.
+  reg: true
+  reset-gpios: true
+  vdd-supply:
+    description: regulator that supplies the vdd voltage
+  vddi-supply:
+    description: regulator that supplies the vddi voltage
+  backlight: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "hydis,hva40wv1", "novatek,nt35510";
+            reg = <0>;
+            vdd-supply = <&ab8500_ldo_aux4_reg>;
+            vddi-supply = <&ab8500_ldo_aux6_reg>;
+            reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+            backlight = <&gpio_bl>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml
new file mode 100644
index 000000000000..377a05d48a02
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35950-based display panels
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels,
+  with Static RAM for content retention in command mode and also supports
+  video mode with VESA Frame Buffer Compression or Display Stream Compression
+  on single, or dual dsi port(s).
+  This DDIC is also capable of upscaling an input image to the panel's native
+  resolution, for example it can upscale a 1920x1080 input to 3840x2160 with
+  either bilinear interpolation or pixel duplication.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sharp,ls055d1sx04
+      - const: novatek,nt35950
+    description: This indicates the panel manufacturer of the panel
+      that is in turn using the NT35950 panel driver. The compatible
+      string determines how the NT35950 panel driver shall be configured
+      to work with the indicated panel. The novatek,nt35950 compatible shall
+      always be provided as a fallback.
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be 8mA, gpio
+      can be configured using mux, pinctrl, pinctrl-names (active high)
+
+  avdd-supply:
+    description: positive boost supply regulator
+  avee-supply:
+    description: negative boost supply regulator
+  dvdd-supply:
+    description: regulator that supplies the digital voltage
+  vddio-supply:
+    description: regulator that supplies the I/O voltage
+
+  backlight: true
+  ports: true
+  reg: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - avdd-supply
+  - avee-supply
+  - dvdd-supply
+  - vddio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls055d1sx04", "novatek,nt35950";
+            reg = <0>;
+
+            backlight = <&pmi8998_wled>;
+            reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+            avdd-supply = <&lab>;
+            avee-supply = <&ibb>;
+            dvdd-supply = <&disp_dvdd_vreg>;
+            vddio-supply = <&vreg_l14a_1p85>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in0: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    panel_in1: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
new file mode 100644
index 000000000000..41ee3157a1cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36672a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36672A based DSI display Panels
+
+maintainers:
+  - Sumit Semwal <sumit.semwal@linaro.org>
+
+description: |
+  The nt36672a IC from Novatek is a generic DSI Panel IC used to drive dsi
+  panels.
+  Right now, support is added only for a Tianma FHD+ LCD display panel with a
+  resolution of 1080x2246. It is a video mode DSI panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - tianma,fhd-video
+      - const: novatek,nt36672a
+    description: This indicates the panel manufacturer of the panel that is
+      in turn using the NT36672A panel driver. This compatible string
+      determines how the NT36672A panel driver is configured for the indicated
+      panel. The novatek,nt36672a compatible shall always be provided as a fallback.
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be 8mA, gpio
+      can be configured using mux, pinctrl, pinctrl-names (active high)
+
+  vddi0-supply:
+    description: phandle of the regulator that provides the supply voltage
+      Power IC supply
+
+  vddpos-supply:
+    description: phandle of the positive boost supply regulator
+
+  vddneg-supply:
+    description: phandle of the negative boost supply regulator
+
+  reg: true
+  port: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - vddi0-supply
+  - vddpos-supply
+  - vddneg-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "tianma,fhd-video", "novatek,nt36672a";
+            reg = <0>;
+            vddi0-supply = <&vreg_l14a_1p88>;
+            vddpos-supply = <&lab>;
+            vddneg-supply = <&ibb>;
+
+            backlight = <&pmi8998_wled>;
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+            port {
+                tianma_nt36672a_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/nvd,9128.txt b/Documentation/devicetree/bindings/display/panel/nvd,9128.txt
deleted file mode 100644
index 17bcd017c678..000000000000
--- a/Documentation/devicetree/bindings/display/panel/nvd,9128.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
-
-Required properties:
-- compatible: should be "nvd,9128"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt b/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt
deleted file mode 100644
index ddf8e211d382..000000000000
--- a/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
-
-Required properties:
-- compatible: should be "okaya,rs800480t-7x0gp"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt
deleted file mode 100644
index 74540a090669..000000000000
--- a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Olimex 4.3" TFT LCD panel
-
-Required properties:
-- compatible: should be "olimex,lcd-olinuxino-43-ts"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt
deleted file mode 100644
index a89f9c830a85..000000000000
--- a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Binding for Olimex Ltd. LCD-OLinuXino bridge panel.
-
-This device can be used as bridge between a host controller and LCD panels.
-Currently supported LCDs are:
-  - LCD-OLinuXino-4.3TS
-  - LCD-OLinuXino-5
-  - LCD-OLinuXino-7
-  - LCD-OLinuXino-10
-
-The panel itself contains:
-  - AT24C16C EEPROM holding panel identification and timing requirements
-  - AR1021 resistive touch screen controller (optional)
-  - FT5x6 capacitive touch screnn controller (optional)
-  - GT911/GT928 capacitive touch screen controller (optional)
-
-The above chips share same I2C bus. The EEPROM is factory preprogrammed with
-device information (id, serial, etc.) and timing requirements.
-
-Touchscreen bingings can be found in these files:
-  - input/touchscreen/goodix.txt
-  - input/touchscreen/edt-ft5x06.txt
-  - input/touchscreen/ar1021.txt
-
-Required properties:
-  - compatible: should be "olimex,lcd-olinuxino"
-  - reg: address of the configuration EEPROM, should be <0x50>
-  - power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties:
-  - enable-gpios: GPIO pin to enable or disable the panel
-  - backlight: phandle of the backlight device attacked to the panel
-
-Example:
-&i2c2 {
-	panel@50 {
-		compatible = "olimex,lcd-olinuxino";
-		reg = <0x50>;
-		power-supply = <&reg_vcc5v0>;
-		enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;
-		backlight = <&backlight>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
new file mode 100644
index 000000000000..2329d9610f83
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Olimex Ltd. LCD-OLinuXino bridge panel.
+
+maintainers:
+  - Stefan Mavrodiev <stefan@olimex.com>
+
+description: |
+  This device can be used as bridge between a host controller and LCD panels.
+  Currently supported LCDs are:
+    - LCD-OLinuXino-4.3TS
+    - LCD-OLinuXino-5
+    - LCD-OLinuXino-7
+    - LCD-OLinuXino-10
+
+  The panel itself contains:
+    - AT24C16C EEPROM holding panel identification and timing requirements
+    - AR1021 resistive touch screen controller (optional)
+    - FT5x6 capacitive touch screnn controller (optional)
+    - GT911/GT928 capacitive touch screen controller (optional)
+
+  The above chips share same I2C bus. The EEPROM is factory preprogrammed with
+  device information (id, serial, etc.) and timing requirements.
+
+  Touchscreen bingings can be found in these files:
+    - input/touchscreen/goodix.yaml
+    - input/touchscreen/edt-ft5x06.txt
+    - input/touchscreen/ar1021.txt
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: olimex,lcd-olinuxino
+
+  backlight: true
+  enable-gpios: true
+  power-supply: true
+  reg: true
+
+required:
+  - compatible
+  - reg
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@50 {
+            compatible = "olimex,lcd-olinuxino";
+            reg = <0x50>;
+            power-supply = <&reg_vcc5v0>;
+            enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt b/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt
deleted file mode 100644
index 3d8a5e029242..000000000000
--- a/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-On Tat Industrial Company 7" DPI TFT panel.
-
-Required properties:
-- compatible: should be "ontat,yx700wv03"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
deleted file mode 100644
index 203b03eefb68..000000000000
--- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
-
-The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
-a MIPI-DSI video interface. Its backlight is managed through the DSI link.
-
-Required properties:
-  - compatible: "orisetech,otm8009a"
-  - reg: the virtual channel number of a DSI peripheral
-
-Optional properties:
-  - reset-gpios: a GPIO spec for the reset pin (active low).
-  - power-supply: phandle of the regulator that provides the supply voltage.
-
-Example:
-&dsi {
-	...
-	panel@0 {
-		compatible = "orisetech,otm8009a";
-		reg = <0>;
-		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
-		power-supply = <&v1v8>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
new file mode 100644
index 000000000000..ad7d3575190e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
+
+maintainers:
+  - Philippe CORNU <philippe.cornu@foss.st.com>
+
+description: |
+             The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
+             a MIPI-DSI video interface. Its backlight is managed through the DSI link.
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    const: orisetech,otm8009a
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  enable-gpios: true
+  port: true
+  power-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "orisetech,otm8009a";
+        reg = <0>;
+        reset-gpios = <&gpiof 15 0>;
+        power-supply = <&v1v8>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt
deleted file mode 100644
index c16907c02f80..000000000000
--- a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel
-
-Required properties:
-- compatible: should be "ortustech,com37h3m05dtc"
-
-Optional properties:
-- enable-gpios: GPIO pin to enable or disable the panel
-- backlight: phandle of the backlight device attached to the panel
-- power-supply: phandle of the regulator that provides the supply voltage
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt
deleted file mode 100644
index 06a73c3f46b5..000000000000
--- a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel
-
-Required properties:
-- compatible: should be "ortustech,com37h3m99dtc"
-
-Optional properties:
-- enable-gpios: GPIO pin to enable or disable the panel
-- backlight: phandle of the backlight device attached to the panel
-- power-supply: phandle of the regulator that provides the supply voltage
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt
deleted file mode 100644
index de19e9398618..000000000000
--- a/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel
-
-Required properties:
-- compatible: should be "ortustech,com43h4m85ulc"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt b/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt
deleted file mode 100644
index e57883ccdf2f..000000000000
--- a/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel
-
-Required properties:
-- compatible: shall be "osddisplays,osd070t1718-19ts"
-- power-supply: see simple-panel.txt
-
-Optional properties:
-- backlight: see simple-panel.txt
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory. No other simple-panel properties than
-the ones specified herein are valid.
diff --git a/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2045-53ts.txt b/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2045-53ts.txt
deleted file mode 100644
index 85c0b2cacfda..000000000000
--- a/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2045-53ts.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel
-
-Required properties:
-- compatible: should be "osddisplays,osd101t2045-53ts"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2587-53ts.txt b/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2587-53ts.txt
deleted file mode 100644
index 9d88e96003fc..000000000000
--- a/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2587-53ts.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel
-
-The panel is similar to OSD101T2045-53TS, but it needs additional
-MIPI_DSI_TURN_ON_PERIPHERAL message from the host.
-
-Required properties:
-- compatible: should be "osddisplays,osd101t2587-53ts"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt b/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt
deleted file mode 100644
index d328b0341bf4..000000000000
--- a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Panasonic Corporation 10.1" WUXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "panasonic,vvx10f004b00"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt b/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt
deleted file mode 100644
index 37dedf6a6702..000000000000
--- a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Panasonic 10" WUXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "panasonic,vvx10f034n00"
-- reg: DSI virtual channel of the peripheral
-- power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
-
-	mdss_dsi@fd922800 {
-		panel@0 {
-			compatible = "panasonic,vvx10f034n00";
-			reg = <0>;
-			power-supply = <&vreg_vsp>;
-			backlight = <&lp8566_wled>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
index ef8d8cdfcede..5b38dc89cb21 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
@@ -48,32 +48,27 @@ properties:
   rotation:
     description:
       Display rotation in degrees counter clockwise (0,90,180,270)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 90, 180, 270 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 90, 180, 270]
 
   # Display Timings
   panel-timing:
-    type: object
     description:
       Most display panels are restricted to a single resolution and
       require specific display timings. The panel-timing subnode expresses those
-      timings as specified in the timing subnode section of the display timing
-      bindings defined in
-      Documentation/devicetree/bindings/display/panel/display-timing.txt.
+      timings.
+    $ref: panel-timing.yaml#
+
+  display-timings:
+    description:
+      Some display panels support several resolutions with different timings.
+      The display-timings bindings supports specifying several timings and
+      optionally specifying which is the native mode.
+    $ref: display-timings.yaml#
 
   # Connectivity
   port:
-    type: object
-
-  ports:
-    type: object
-    description:
-      Panels receive video data through one or multiple connections. While
-      the nature of those connections is specific to the panel type, the
-      connectivity is expressed in a standard fashion using ports as specified
-      in the device graph bindings defined in
-      Documentation/devicetree/bindings/graph.txt.
+    $ref: /schemas/graph.yaml#/properties/port
 
   ddc-i2c-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -89,6 +84,12 @@ properties:
       (hot plug detect) signal, but the signal isn't hooked up so we should
       hardcode the max delay from the panel spec when powering up the panel.
 
+  hpd-gpios:
+    maxItems: 1
+    description:
+      If Hot Plug Detect (HPD) is connected to a GPIO in the system rather
+      than a dedicated HPD pin the pin can be specified here.
+
   # Control I/Os
 
   # Many display panels can be controlled through pins driven by GPIOs. The nature
@@ -117,6 +118,13 @@ properties:
       while active. Active high reset signals can be supported by inverting the
       GPIO specifier polarity flag.
 
+  te-gpios:
+    maxItems: 1
+    description:
+      GPIO spec for the tearing effect synchronization signal.
+      The tearing effect signal is active high. Active low signals can be
+      supported by inverting the GPIO specifier polarity flag.
+
   # Power
   power-supply:
     description:
@@ -146,4 +154,6 @@ dependencies:
   width-mm: [ height-mm ]
   height-mm: [ width-mm ]
 
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
deleted file mode 100644
index 6b203bc4d932..000000000000
--- a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Generic MIPI DPI Panel
-======================
-
-Required properties:
-- compatible: "panel-dpi"
-
-Optional properties:
-- label: a symbolic name for the panel
-- enable-gpios: panel enable gpio
-- reset-gpios: GPIO to control the RESET pin
-- vcc-supply: phandle of regulator that will be used to enable power to the display
-- backlight: phandle of the backlight device
-
-Required nodes:
-- "panel-timing" containing video timings
-  (Documentation/devicetree/bindings/display/panel/display-timing.txt)
-- Video port for DPI input
-
-Example
--------
-
-lcd0: display@0 {
-        compatible = "samsung,lte430wq-f0c", "panel-dpi";
-        label = "lcd";
-
-        backlight = <&backlight>;
-
-        port {
-            lcd_in: endpoint {
-                    remote-endpoint = <&dpi_out>;
-            };
-        };
-
-        panel-timing {
-                clock-frequency = <9200000>;
-                hactive = <480>;
-                vactive = <272>;
-                hfront-porch = <8>;
-                hback-porch = <4>;
-                hsync-len = <41>;
-                vback-porch = <2>;
-                vfront-porch = <4>;
-                vsync-len = <10>;
-
-                hsync-active = <0>;
-                vsync-active = <0>;
-                de-active = <1>;
-                pixelclk-active = <1>;
-        };
-};
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
new file mode 100644
index 000000000000..dae0676b5c6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic MIPI DPI Panel
+
+maintainers:
+  - Sam Ravnborg <sam@ravnborg.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    description:
+      Shall contain a panel specific compatible and "panel-dpi"
+      in that order.
+    items:
+      - {}
+      - const: panel-dpi
+
+  backlight: true
+  enable-gpios: true
+  height-mm: true
+  label: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  reset-gpios: true
+  width-mm: true
+
+required:
+  - panel-timing
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    panel {
+        compatible = "startek,startek-kd050c", "panel-dpi";
+        label = "osddisplay";
+        power-supply = <&vcc_supply>;
+        backlight = <&backlight>;
+
+        port {
+            lcd_in: endpoint {
+                remote-endpoint = <&dpi_out>;
+            };
+        };
+        panel-timing {
+            clock-frequency = <9200000>;
+            hactive = <800>;
+            vactive = <480>;
+            hfront-porch = <8>;
+            hback-porch = <4>;
+            hsync-len = <41>;
+            vback-porch = <2>;
+            vfront-porch = <4>;
+            vsync-len = <10>;
+
+            hsync-active = <0>;
+            vsync-active = <0>;
+            de-active = <1>;
+            pixelclk-active = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt
deleted file mode 100644
index dce48eb9db57..000000000000
--- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Generic MIPI DSI Command Mode Panel
-===================================
-
-Required properties:
-- compatible: "panel-dsi-cm"
-
-Optional properties:
-- label: a symbolic name for the panel
-- reset-gpios: panel reset gpio
-- te-gpios: panel TE gpio
-
-Required nodes:
-- Video port for DSI input
-
-Example
--------
-
-lcd0: display {
-	compatible = "tpo,taal", "panel-dsi-cm";
-	label = "lcd0";
-
-	reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
-
-	port {
-		lcd0_in: endpoint {
-			remote-endpoint = <&dsi1_out_ep>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
new file mode 100644
index 000000000000..4a36aa64c716
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DSI command mode panels
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  This binding file is a collection of the DSI panels that
+  are usually driven in command mode. If no backlight is
+  referenced via the optional backlight property, the DSI
+  panel is assumed to have native backlight support.
+  The panel may use an OF graph binding for the association
+  to the display, or it may be a direct child node of the
+  display.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    items:
+      - enum:
+          - motorola,droid4-panel        # Panel from Motorola Droid4 phone
+          - nokia,himalaya               # Panel from Nokia N950 phone
+          - tpo,taal                     # Panel from OMAP4 SDP board
+      - const: panel-dsi-cm              # Generic DSI command mode panel compatible fallback
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddi-supply:
+    description:
+      Display panels require power to be supplied. While several panels need
+      more than one power supply with panel-specific constraints governing the
+      order and timings of the power supplies, in many cases a single power
+      supply is sufficient, either because the panel has a single power rail, or
+      because all its power rails can be driven by the same supply. In that case
+      the vddi-supply property specifies the supply powering the panel as a
+      phandle to a regulator.
+
+  vpnl-supply:
+    description:
+      When the display panel needs a second power supply, this property can be
+      used in addition to vddi-supply. Both supplies will be enabled at the
+      same time before the panel is being accessed.
+
+  width-mm: true
+  height-mm: true
+  label: true
+  rotation: true
+  panel-timing: true
+  port: true
+  reset-gpios: true
+  te-gpios: true
+  backlight: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi-controller {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "tpo,taal", "panel-dsi-cm";
+            reg = <0>;
+            reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-edp.yaml b/Documentation/devicetree/bindings/display/panel/panel-edp.yaml
new file mode 100644
index 000000000000..bb0cf6827e79
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-edp.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-edp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Probeable (via DP AUX / EDID) eDP Panels with simple poweron sequences
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description: |
+  This binding file can be used to indicate that an eDP panel is connected
+  to a Embedded DisplayPort AUX bus (see display/dp-aux-bus.yaml) without
+  actually specifying exactly what panel is connected. This is useful for
+  the case that more than one different panel could be connected to the
+  board, either for second-sourcing purposes or to support multiple SKUs
+  with different LCDs that hook up to a common board.
+
+  As per above, a requirement for using this binding is that the panel is
+  represented under the DP AUX bus. This means that we can use any
+  information provided by the DP AUX bus (including the EDID) to identify
+  the panel. We can use this to identify display size, resolution, and
+  timings among other things.
+
+  One piece of information about eDP panels that is typically _not_
+  provided anywhere on the DP AUX bus is the power sequencing timings.
+  This is the reason why, historically, we've always had to explicitly
+  list eDP panels. We solve that here with two tricks. The "worst case"
+  power on timings for any panels expected to be connected to a board are
+  specified in these bindings. Once we've powered on, it's expected that
+  the operating system will lookup the panel in a table (based on EDID
+  information) to figure out other power sequencing timings.
+
+  eDP panels in general can have somewhat arbitrary power sequencing
+  requirements. However, even though it's arbitrary in general, the
+  vast majority of panel datasheets have a power sequence diagram that
+  looks the exactly the same as every other panel. Each panel datasheet
+  cares about different timings in this diagram but the fact that the
+  diagram is so similar means we can come up with a single driver to
+  handle it.
+
+  These diagrams all look roughly like this, sometimes labeled with
+  slightly different numbers / lines but all pretty much the same
+  sequence. This is because much of this diagram comes straight from
+  the eDP Standard.
+
+                __________________________________________________
+  Vdd       ___/:                                                :\____       /
+          _/    :                                                :     \_____/
+           :<T1>:<T2>:                                 :<--T10-->:<T11>:<T12>:
+                :    +-----------------------+---------+---------+
+  eDP     -----------+ Black video           | Src vid | Blk vid +
+  Display       :    +-----------------------+---------+---------+
+                :     _______________________:_________:_________:
+  HPD           :<T3>|                       :         :         |
+          ___________|                       :         :         |_____________
+                     :                       :         :         :
+  Sink               +-----------------------:---------:---------+
+  AUX CH  -----------+ AUX Ch operational    :         :         +-------------
+                     +-----------------------:---------:---------+
+                     :                       :         :         :
+                     :<T4>:             :<T7>:         :         :
+  Src main                +------+------+--------------+---------+
+  lnk data----------------+LnkTrn| Idle |Valid vid data| Idle/off+-------------
+                          +------+------+--------------+---------+
+                          : <T5> :<-T6->:<-T8->:       :
+                                               :__:<T9>:
+  LED_EN                                       |  |
+          _____________________________________|  |____________________________
+                                               :  :
+                                     __________:__:_
+  PWM                               |          :  : |
+          __________________________|          :  : |__________________________
+                                    :          :  : :
+                       _____________:__________:__:_:______
+  Bklight         ____/:            :          :  : :     :\____
+  power   _______/     :<---T13---->:          :  : :<T16>:     \______________
+  (Vbl)          :<T17>:<---------T14--------->:  :<-T15->:<T18>:
+
+  The above looks fairly complex but, as per above, each panel only cares
+  about a subset of those timings.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: edp-panel
+
+  hpd-reliable-delay-ms:
+    description:
+      A fixed amount of time that must be waited after powering on the
+      panel's power-supply before the HPD signal is a reliable way to know
+      when the AUX channel is ready. This is useful for panels that glitch
+      the HPD at the start of power-on. This value is not needed if HPD is
+      always reliable for all panels that might be connected.
+
+  hpd-absent-delay-ms:
+    description:
+      The panel specifies that HPD will be asserted this many milliseconds
+      from power on (timing T3 in the diagram above). If we have no way to
+      measure HPD then a fixed delay of this many milliseconds can be used.
+      This can also be used as a timeout when waiting for HPD. Does not
+      include the hpd-reliable-delay, so if hpd-reliable-delay was 80 ms
+      and hpd-absent-delay was 200 ms then we'd do a fixed 80 ms delay and
+      then we know HPD would assert in the next 120 ms. This value is not
+      needed if HPD hooked up, either through a GPIO in the panel node or
+      hooked up directly to the eDP controller.
+
+  backlight: true
+  enable-gpios: true
+  port: true
+  power-supply: true
+  no-hpd: true
+  hpd-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+        vpll-supply = <&src_pp1800_s4a>;
+        vccio-supply = <&src_pp1800_s4a>;
+        vcca-supply = <&src_pp1200_l2a>;
+        vcc-supply = <&src_pp1200_l2a>;
+
+        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+        clock-names = "refclk";
+
+        no-hpd;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            sn65dsi86_out: endpoint {
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+
+        aux-bus {
+          panel {
+            compatible = "edp-panel";
+            power-supply = <&pp3300_dx_edp>;
+            backlight = <&backlight>;
+            hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+            hpd-reliable-delay-ms = <15>;
+
+            port {
+              panel_in_edp: endpoint {
+                remote-endpoint = <&sn65dsi86_out>;
+              };
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
new file mode 100644
index 000000000000..fcc50db6a812
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic LVDS Display Panel Device Tree Bindings
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: panel-lvds
+
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - advantech,idk-1110wr
+            - advantech,idk-2121wr
+            - innolux,ee101ia-01d
+            - mitsubishi,aa104xd12
+            - mitsubishi,aa121td01
+            - sgd,gktw70sdae4se
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - auo,b101ew05
+          - tbs,a711-panel
+
+      - const: panel-lvds
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
new file mode 100644
index 000000000000..c2df8d28aaf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DBI SPI Panel
+
+maintainers:
+  - Noralf Trønnes <noralf@tronnes.org>
+
+description: |
+  This binding is for display panels using a MIPI DBI compatible controller
+  in SPI mode.
+
+  The MIPI Alliance Standard for Display Bus Interface defines the electrical
+  and logical interfaces for display controllers historically used in mobile
+  phones. The standard defines 4 display architecture types and this binding is
+  for type 1 which has full frame memory. There are 3 interface types in the
+  standard and type C is the serial interface.
+
+  The standard defines the following interface signals for type C:
+  - Power:
+    - Vdd: Power supply for display module
+    - Vddi: Logic level supply for interface signals
+    Combined into one in this binding called: power-supply
+  - Interface:
+    - CSx: Chip select
+    - SCL: Serial clock
+    - Dout: Serial out
+    - Din: Serial in
+    - SDA: Bidrectional in/out
+    - D/CX: Data/command selection, high=data, low=command
+      Called dc-gpios in this binding.
+    - RESX: Reset when low
+      Called reset-gpios in this binding.
+
+  The type C interface has 3 options:
+
+    - Option 1: 9-bit mode and D/CX as the 9th bit
+      |              Command              |  the next command or following data  |
+      |<0><D7><D6><D5><D4><D3><D2><D1><D0>|<D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 2: 16-bit mode and D/CX as a 9th bit
+      |              Command or data                              |
+      |<X><X><X><X><X><X><X><D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 3: 8-bit mode and D/CX as a separate interface line
+      |        Command or data         |
+      |<D7><D6><D5><D4><D3><D2><D1><D0>|
+
+  The panel resolution is specified using the panel-timing node properties
+  hactive (width) and vactive (height). The other mandatory panel-timing
+  properties should be set to zero except clock-frequency which can be
+  optionally set to inform about the actual pixel clock frequency.
+
+  If the panel is wired to the controller at an offset specify this using
+  hback-porch (x-offset) and vback-porch (y-offset).
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sainsmart18
+      - const: panel-mipi-dbi-spi
+
+  write-only:
+    type: boolean
+    description:
+      Controller is not readable (ie. Din (MISO on the SPI interface) is not
+      wired up).
+
+  dc-gpios:
+    maxItems: 1
+    description: |
+      Controller data/command selection (D/CX) in 4-line SPI mode.
+      If not set, the controller is in 3-line SPI mode.
+
+required:
+  - compatible
+  - reg
+  - width-mm
+  - height-mm
+  - panel-timing
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0{
+            compatible = "sainsmart18", "panel-mipi-dbi-spi";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+
+            dc-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+            write-only;
+
+            backlight = <&backlight>;
+
+            width-mm = <35>;
+            height-mm = <28>;
+
+            panel-timing {
+                hactive = <160>;
+                vactive = <128>;
+                hback-porch = <0>;
+                vback-porch = <0>;
+                clock-frequency = <0>;
+                hfront-porch = <0>;
+                hsync-len = <0>;
+                vfront-porch = <0>;
+                vsync-len = <0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
new file mode 100644
index 000000000000..2c00813f5d20
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple DSI panels with a single power-supply
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  This binding file is a collection of the DSI panels that
+  requires only a single power-supply.
+  There are optionally a backlight and an enable GPIO.
+  The panel may use an OF graph binding for the association to the display,
+  or it may be a direct child node of the display.
+
+  If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    enum:
+      # compatible must be listed in alphabetical order, ordered by compatible.
+      # The description in the comment is mandatory for each compatible.
+
+        # AU Optronics Corporation 8.0" WUXGA TFT LCD panel
+      - auo,b080uan01
+        # Boe Corporation 8.0" WUXGA TFT LCD panel
+      - boe,tv080wum-nl0
+        # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
+      - innolux,p079zca
+        # JDI FHD_R63452 1080x1920 5.2" IPS LCD Panel
+      - jdi,fhd-r63452
+        # Khadas TS050 5" 1080x1920 LCD panel
+      - khadas,ts050
+        # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
+      - kingdisplay,kd097d04
+        # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
+      - lg,acx467akm-7
+        # LG Corporation 7" WXGA TFT LCD panel
+      - lg,ld070wx3-sl01
+        # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel
+      - osddisplays,osd101t2587-53ts
+        # Panasonic 10" WUXGA TFT LCD panel
+      - panasonic,vvx10f004b00
+        # Panasonic 10" WUXGA TFT LCD panel
+      - panasonic,vvx10f034n00
+        # Samsung s6e3fc2x01 1080x2340 AMOLED panel
+      - samsung,s6e3fc2x01
+        # Samsung sofef00 1080x2280 AMOLED panel
+      - samsung,sofef00
+        # Shangai Top Display Optoelectronics 7" TL070WSH30 1024x600 TFT LCD panel
+      - tdo,tl070wsh30
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  backlight: true
+  enable-gpios: true
+  reset-gpios: true
+  port: true
+  power-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+  - reg
+
+examples:
+  - |
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "panasonic,vvx10f034n00";
+        reg = <0>;
+        power-supply = <&vcc_lcd_reg>;
+
+        port {
+          panel: endpoint {
+            remote-endpoint = <&ltdc_out>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 8fe60ee2531c..18241f4051d2 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -29,25 +29,326 @@ properties:
     # compatible must be listed in alphabetical order, ordered by compatible.
     # The description in the comment is mandatory for each compatible.
 
+        # Ampire AM-1280800N3TZQW-T00H 10.1" WQVGA TFT LCD panel
+      - ampire,am-1280800n3tzqw-t00h
         # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
       - ampire,am-480272h3tmqw-t01h
         # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
       - ampire,am800480r3tmqwa1h
+        # Ampire AM-800600P5TMQW-TB8H 8.0" SVGA TFT LCD panel
+      - ampire,am800600p5tmqw-tb8h
+        # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+      - auo,b101aw03
+        # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+      - auo,b101ean01
+        # AU Optronics Corporation 10.1" WXGA TFT LCD panel
+      - auo,b101xtn01
         # AUO B116XAK01 eDP TFT LCD panel
       - auo,b116xa01
+        # AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
+      - auo,b116xw03
+        # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+      - auo,b133han05
+        # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+      - auo,b133htn01
+        # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
+      - auo,b133xtn01
+        # AU Optronics Corporation 14.0" FHD (1920x1080) color TFT-LCD panel
+      - auo,b140han06
+        # AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
+      - auo,g070vvn01
+        # AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
+      - auo,g101evn010
+        # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
+      - auo,g104sn02
+        # AU Optronics Corporation 12.1" (1280x800) TFT LCD panel
+      - auo,g121ean01
+        # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
+      - auo,g133han01
+        # AU Optronics Corporation 15.6" (1366x768) TFT LCD panel
+      - auo,g156xtn01
+        # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
+      - auo,g185han01
+        # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel
+      - auo,g190ean01
+        # AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
+      - auo,p320hvn03
+        # AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
+      - auo,t215hvn01
+        # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
+      - avic,tm070ddh03
+        # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
+      - boe,hv070wsa-100
+        # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
+      - boe,nv101wxmn51
+        # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
+      - boe,nv110wtm-n61
+        # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel
+      - boe,nv133fhm-n61
+        # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel
+      - boe,nv133fhm-n62
         # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
       - boe,nv140fhmn49
+        # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
+      - cdtech,s043wq26h-ct7
+        # CDTech(H.K.) Electronics Limited 7" WSVGA (1024x600) TFT LCD Panel
+      - cdtech,s070pws19hp-fc21
+        # CDTech(H.K.) Electronics Limited 7" WVGA (800x480) TFT LCD Panel
+      - cdtech,s070swv29hg-dc44
+        # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel
+      - cdtech,s070wv95-ct16
+        # Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel
+      - chefree,ch101olhlwh-002
+        # Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel
+      - chunghwa,claa070wp03xg
+        # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+      - chunghwa,claa101wa01a
+        # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+      - chunghwa,claa101wb01
+        # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+      - chunghwa,claa101wb03
+        # DataImage, Inc. 4.3" WQVGA (480x272) TFT LCD panel with 24-bit parallel interface.
+      - dataimage,fg040346dsswbg04
+        # DataImage, Inc. 10.1" WXGA (1280×800) TFT LCD panel
+      - dataimage,fg1001l0dsswmg01
+        # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface.
+      - dataimage,scf0700c48ggu18
+        # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel
+      - dlc,dlc1010gig
+        # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel
+      - edt,et035012dm6
+        # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
+      - edt,et057090dhu
+      - edt,et070080dh6
+        # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with
+        # capacitive multitouch
+      - edt,etm0350g0dh6
+        # Emerging Display Technology Corp. 480x272 TFT Display with capacitive touch
+      - edt,etm043080dh6gp
+        # Emerging Display Technology Corp. 480x272 TFT Display
+      - edt,etm0430g0dh6
+        # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+        # Same as ETM0700G0DH6 but with inverted pixel clock.
+      - edt,etm070080bdh6
+        # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+        # Same timings as the ETM0700G0DH6, but with resistive touch.
+      - edt,etm070080dh6
+        # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+        # Same display as the ETM0700G0BDH6, but with changed hardware for the
+        # backlight and the touch interface.
+      - edt,etm070080edh6
+      - edt,etm0700g0bdh6
+        # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+      - edt,etm0700g0dh6
+      - edt,etm0700g0edh6
+        # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch
+      - edt,etml0700y5dha
+        # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
+        # capacitive touch
+      - edt,etmv570g2dhu
+        # E Ink VB3300-KCA
+      - eink,vb3300-kca
+        # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel
+      - evervision,vgg804821
+        # Foxlink Group 5" WVGA TFT LCD panel
+      - foxlink,fl500wvr00-a0t
+        # Frida FRD350H54004 3.5" QVGA TFT LCD panel
+      - frida,frd350h54004
+        # FriendlyELEC HD702E 800x1280 LCD panel
+      - friendlyarm,hd702e
+        # GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
+      - giantplus,gpg48273qs5
         # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel
       - giantplus,gpm940b0
+        # HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
+      - hannstar,hsd070pww1
+        # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel
+      - hannstar,hsd100pxn1
+        # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel
+      - hannstar,hsd101pww2
+        # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
+      - hit,tx23d38vm0caa
+        # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel
+      - ivo,m133nwf4-r0
+        # Innolux AT043TN24 4.3" WQVGA TFT LCD panel
+      - innolux,at043tn24
+        # Innolux AT070TN92 7.0" WQVGA TFT LCD panel
+      - innolux,at070tn92
+        # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
+      - innolux,g070y2-l01
+        # Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel
+      - innolux,g070y2-t02
+        # Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel
+      - innolux,g101ice-l01
+        # Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
+      - innolux,g121i1-l01
+        # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
+      - innolux,g121x1-l03
+        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+      - innolux,n116bca-ea1
+        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+      - innolux,n116bge
+        # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel
+      - innolux,n125hce-gn1
+        # InnoLux 15.6" WXGA TFT LCD panel
+      - innolux,n156bge-l21
+        # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
+      - innolux,zj070na-01p
+        # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
+      - kingdisplay,kd116n21-30nv-a010
+        # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
+      - koe,tx14d24vm1bpa
+        # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel
+      - koe,tx26d202vm0bwa
+        # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
+      - koe,tx31d200vm0baa
+        # Kyocera Corporation 7" WVGA (800x480) transmissive color TFT
+      - kyo,tcg070wvlq
+        # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel
+      - kyo,tcg121xglp
+        # LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel
+      - lemaker,bl035-rgb-002
+        # LG 7" (800x480 pixels) TFT LCD panel
+      - lg,lb070wv8
+        # LG Corporation 5" HD TFT LCD panel
+      - lg,lh500wx1-sd03
+        # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
+      - lg,lp079qx1-sp0v
+        # LG 9.7" (2048x1536 pixels) TFT LCD panel
+      - lg,lp097qx1-spa1
+        # LG 12.0" (1920x1280 pixels) TFT LCD panel
+      - lg,lp120up1
+        # LG 12.9" (2560x1700 pixels) TFT LCD panel
+      - lg,lp129qe
+        # Logic Technologies LT161010-2NHC 7" WVGA TFT Cap Touch Module
+      - logictechno,lt161010-2nhc
+        # Logic Technologies LT161010-2NHR 7" WVGA TFT Resistive Touch Module
+      - logictechno,lt161010-2nhr
+        # Logic Technologies LT170410-2WHC 10.1" 1280x800 IPS TFT Cap Touch Mod.
+      - logictechno,lt170410-2whc
+        # Logic Technologies LTTD800x480 L2RT 7" 800x480 TFT Resistive Touch Module
+      - logictechno,lttd800480070-l2rt
+        # Logic Technologies LTTD800480070-L6WH-RT 7” 800x480 TFT Resistive Touch Module
+      - logictechno,lttd800480070-l6wh-rt
+        # Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
+      - mitsubishi,aa070mc01-ca1
+        # Multi-Inno Technology Co.,Ltd MI0700S4T-6 7" 800x480 TFT Resistive Touch Module
+      - multi-inno,mi0700s4t-6
+        # Multi-Inno Technology Co.,Ltd MI0800FT-9 8" 800x600 TFT Resistive Touch Module
+      - multi-inno,mi0800ft-9
+        # Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod.
+      - multi-inno,mi1010ait-1cp
+        # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel
+      - nec,nl12880bc20-05
+        # NEC LCD Technologies,Ltd. WQVGA TFT LCD panel
+      - nec,nl4827hc19-05b
+        # Netron-DY E231732 7.0" WSVGA TFT LCD panel
+      - netron-dy,e231732
+        # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel
+      - neweast,wjfh116008a
+        # Newhaven Display International 480 x 272 TFT LCD panel
+      - newhaven,nhd-4.3-480272ef-atxl
+        # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel
+      - nlt,nl192108ac18-02d
+        # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
+      - nvd,9128
+        # OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
+      - okaya,rs800480t-7x0gp
+        # Olimex 4.3" TFT LCD panel
+      - olimex,lcd-olinuxino-43-ts
+        # On Tat Industrial Company 7" DPI TFT panel.
+      - ontat,yx700wv03
+        # OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel
+      - ortustech,com37h3m05dtc
+        # OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel
+      - ortustech,com37h3m99dtc
+        # OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel
+      - ortustech,com43h4m85ulc
+        # OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel
+      - osddisplays,osd070t1718-19ts
+        # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel
+      - osddisplays,osd101t2045-53ts
+        # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel
+      - powertip,ph800480t013-idf02
+        # QiaoDian XianShi Corporation 4"3 TFT LCD panel
+      - qiaodian,qd43003c0-40
+        # Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel
+      - qishenglong,gopher2b-lcd
+        # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800
+      - rocktech,rk101ii01d-ct
+        # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
+      - rocktech,rk070er9427
+        # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
+      - samsung,atna33xc20
+        # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
+      - samsung,lsn122dl01-c01
+        # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel
+      - samsung,ltl101al01
+        # Samsung Electronics 10.1" WSVGA TFT LCD panel
+      - samsung,ltn101nt05
+        # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
+      - samsung,ltn140at29-301
         # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel
       - satoz,sat050at40h12r2
+        # Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
+      - sharp,lq035q7db03
+        # Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel
+      - sharp,lq070y3dg3b
+        # Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel
+      - sharp,lq101k1ly04
+        # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
+      - sharp,lq123p1jx31
+        # Sharp 14" (1920x1080 pixels) TFT LCD panel
+      - sharp,lq140m1jw46
         # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
       - sharp,ls020b1dd01d
+        # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
+      - shelly,sca07010-bfn-lnn
+        # Starry KR070PE2T 7" WVGA TFT LCD panel
+      - starry,kr070pe2t
+        # Starry 12.2" (1920x1200 pixels) TFT LCD panel
+      - starry,kr122ea0sra
+        # Startek KD070WVFPA043-C069A 7" TFT LCD panel
+      - startek,kd070wvfpa
+        # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel
+      - team-source-display,tst043015cmhx
+        # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
+      - tianma,tm070jdhg30
+        # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel
+      - tianma,tm070jvhg33
+        # Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel
+      - tianma,tm070rvhg71
+        # Toshiba 8.9" WXGA (1280x768) TFT LCD panel
+      - toshiba,lt089ac29000
+        # TPK U.S.A. LLC Fusion 7" 800 x 480 (WVGA) LCD panel with capacitive touch
+      - tpk,f07a-0102
+        # TPK U.S.A. LLC Fusion 10.1" 1024 x 600 (WSVGA) LCD panel with capacitive touch
+      - tpk,f10a-0102
+        # United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT LCD panel
+        # Supported are LVDS versions (-11T, -19T) and parallel ones
+        # (-T, -1T, -7T, -20T).
+      - urt,umsh-8596md-t
+      - urt,umsh-8596md-1t
+      - urt,umsh-8596md-7t
+      - urt,umsh-8596md-11t
+      - urt,umsh-8596md-19t
+      - urt,umsh-8596md-20t
+        # Vivax TPC-9150 tablet 9.0" WSVGA TFT LCD panel
+      - vivax,tpc9150-panel
+        # VXT 800x480 color TFT LCD panel
+      - vxt,vl050-8048nt-c01
+        # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel
+      - winstar,wf35ltiacd
+        # Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel
+      - yes-optoelectronics,ytc700tlag-05-201c
 
   backlight: true
+  ddc-i2c-bus: true
   enable-gpios: true
   port: true
   power-supply: true
+  no-hpd: true
+  hpd-gpios: true
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
new file mode 100644
index 000000000000..229e3b36ee29
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-timing.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: panel timing bindings
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  There are different ways of describing the timing data of a panel. The
+  devicetree representation corresponds to the one commonly found in datasheets
+  for panels.
+
+  The parameters are defined as seen in the following illustration.
+
+  +----------+-------------------------------------+----------+-------+
+  |          |        ^                            |          |       |
+  |          |        |vback_porch                 |          |       |
+  |          |        v                            |          |       |
+  +----------#######################################----------+-------+
+  |          #        ^                            #          |       |
+  |          #        |                            #          |       |
+  |  hback   #        |                            #  hfront  | hsync |
+  |   porch  #        |       hactive              #  porch   |  len  |
+  |<-------->#<-------+--------------------------->#<-------->|<----->|
+  |          #        |                            #          |       |
+  |          #        |vactive                     #          |       |
+  |          #        |                            #          |       |
+  |          #        v                            #          |       |
+  +----------#######################################----------+-------+
+  |          |        ^                            |          |       |
+  |          |        |vfront_porch                |          |       |
+  |          |        v                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+  |          |        ^                            |          |       |
+  |          |        |vsync_len                   |          |       |
+  |          |        v                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+
+
+  The following is the panel timings shown with time on the x-axis.
+  This matches the timing diagrams often found in data sheets.
+
+              Active                 Front           Sync           Back
+              Region                 Porch                          Porch
+  <-----------------------><----------------><-------------><-------------->
+    //////////////////////|
+   ////////////////////// |
+  //////////////////////  |..................               ................
+                                             _______________
+
+  Timing can be specified either as a typical value or as a tuple
+  of min, typ, max values.
+
+properties:
+
+  clock-frequency:
+    description: Panel clock in Hz
+
+  hactive:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Horizontal panel resolution in pixels
+
+  vactive:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vertical panel resolution in pixels
+
+  hfront-porch:
+    description: Horizontal front porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of pixels
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of pixels
+
+  hback-porch:
+    description: Horizontal back porch timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of pixels
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of pixels
+
+  hsync-len:
+    description: Horizontal sync length panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of pixels
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of pixels
+
+  vfront-porch:
+    description: Vertical front porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of lines
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of lines
+
+  vback-porch:
+    description: Vertical back porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of lines
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of lines
+
+  vsync-len:
+    description: Vertical sync length panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of lines
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of lines
+
+  hsync-active:
+    description: |
+      Horizontal sync pulse.
+      0 selects active low, 1 selects active high.
+      If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  vsync-active:
+    description: |
+      Vertical sync pulse.
+      0 selects active low, 1 selects active high.
+      If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  de-active:
+    description: |
+      Data enable.
+      0 selects active low, 1 selects active high.
+      If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  pixelclk-active:
+    description: |
+      Data driving on rising or falling edge.
+      Use 0 to drive pixel data on falling edge and
+      sample data on rising edge.
+      Use 1 to drive pixel data on rising edge and
+      sample data on falling edge
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  syncclk-active:
+    description: |
+      Drive sync on rising or sample sync on falling edge.
+      If not specified then the setup is as specified by pixelclk-active.
+      Use 0 to drive sync on falling edge and
+      sample sync on rising edge of pixel clock.
+      Use 1 to drive sync on rising edge and
+      sample sync on falling edge of pixel clock
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  interlaced:
+    type: boolean
+    description: Enable interlaced mode
+
+  doublescan:
+    type: boolean
+    description: Enable double scan mode
+
+  doubleclk:
+    type: boolean
+    description: Enable double clock mode
+
+required:
+  - clock-frequency
+  - hactive
+  - vactive
+  - hfront-porch
+  - hback-porch
+  - hsync-len
+  - vfront-porch
+  - vback-porch
+  - vsync-len
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt b/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt
deleted file mode 100644
index 0fbdab89ac3d..000000000000
--- a/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-QiaoDian XianShi Corporation 4"3 TFT LCD panel
-
-Required properties:
-- compatible: should be "qiaodian,qd43003c0-40"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
deleted file mode 100644
index 10424695aa02..000000000000
--- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
-
-Required properties:
-- compatible: 		"raydium,rm67191"
-- reg:			virtual channel for MIPI-DSI protocol
-			must be <0>
-- dsi-lanes:		number of DSI lanes to be used
-			must be <3> or <4>
-- port: 		input port node with endpoint definition as
-			defined in Documentation/devicetree/bindings/graph.txt;
-			the input port should be connected to a MIPI-DSI device
-			driver
-
-Optional properties:
-- reset-gpios:		a GPIO spec for the RST_B GPIO pin
-- v3p3-supply:		phandle to 3.3V regulator that powers the VDD_3V3 pin
-- v1p8-supply:		phandle to 1.8V regulator that powers the VDD_1V8 pin
-- width-mm:		see panel-common.txt
-- height-mm:		see panel-common.txt
-- video-mode:		0 - burst-mode
-			1 - non-burst with sync event
-			2 - non-burst with sync pulse
-
-Example:
-
-	panel@0 {
-		compatible = "raydium,rm67191";
-		reg = <0>;
-		pinctrl-0 = <&pinctrl_mipi_dsi_0_1_en>;
-		pinctrl-names = "default";
-		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		dsi-lanes = <4>;
-		width-mm = <68>;
-		height-mm = <121>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&mipi_out>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
new file mode 100644
index 000000000000..d62fd692bf10
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm67191.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
+
+maintainers:
+  - Robert Chiras <robert.chiras@nxp.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: raydium,rm67191
+
+  reg: true
+  port: true
+  reset-gpios: true
+  width-mm: true
+  height-mm: true
+
+  dsi-lanes:
+    description: Number of DSI lanes to be used must be <3> or <4>
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [3, 4]
+
+  v3p3-supply:
+    description: phandle to 3.3V regulator that powers the VDD_3V3 pin
+
+  v1p8-supply:
+    description: phandle to 1.8V regulator that powers the VDD_1V8 pin
+
+  video-mode:
+    description: |
+      0 - burst-mode
+      1 - non-burst with sync event
+      2 - non-burst with sync pulse
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+  - dsi-lanes
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "raydium,rm67191";
+            reg = <0>;
+            reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+            dsi-lanes = <4>;
+            width-mm = <68>;
+            height-mm = <121>;
+            video-mode = <1>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt
deleted file mode 100644
index cbb79ef3bfc9..000000000000
--- a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
-
-The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
-panel connected using a MIPI-DSI video interface.
-
-Required properties:
-  - compatible: "raydium,rm68200"
-  - reg: the virtual channel number of a DSI peripheral
-
-Optional properties:
-  - reset-gpios: a GPIO spec for the reset pin (active low).
-  - power-supply: phandle of the regulator that provides the supply voltage.
-  - backlight: phandle of the backlight device attached to the panel.
-
-Example:
-&dsi {
-	...
-	panel@0 {
-		compatible = "raydium,rm68200";
-		reg = <0>;
-		reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
-		power-supply = <&v1v8>;
-		backlight = <&pwm_backlight>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
new file mode 100644
index 000000000000..e8ce2315631a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
+
+maintainers:
+  - Philippe CORNU <philippe.cornu@foss.st.com>
+
+description: |
+  The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
+  panel connected using a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    const: raydium,rm68200
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  backlight: true
+  enable-gpios: true
+  port: true
+  power-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+  - reg
+
+examples:
+  - |
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "raydium,rm68200";
+        reg = <0>;
+        reset-gpios = <&gpiof 15 0>;
+        power-supply = <&v1v8>;
+        backlight = <&pwm_backlight>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
deleted file mode 100644
index a372c5d84695..000000000000
--- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel
-
-Required properties:
-- compatible: should be "rocktech,jh057n00900"
-- reg: DSI virtual channel of the peripheral
-- reset-gpios: panel reset gpio
-- backlight: phandle of the backlight device attached to the panel
-- vcc-supply: phandle of the regulator that provides the vcc supply voltage.
-- iovcc-supply: phandle of the regulator that provides the iovcc supply
-  voltage.
-
-Example:
-
-	&mipi_dsi {
-		panel@0 {
-			compatible = "rocktech,jh057n00900";
-			reg = <0>;
-			backlight = <&backlight>;
-			reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-			vcc-supply = <&reg_2v8_p>;
-			iovcc-supply = <&reg_1v8_p>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
new file mode 100644
index 000000000000..09b5eb7542f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+
+maintainers:
+  - Ondrej Jirman <megi@xff.cz>
+  - Guido Gŭnther <agx@sigxcpu.org>
+
+description:
+  Rocktech JH057N00900 is a 720x1440 TFT LCD panel
+  connected using a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+      - rocktech,jh057n00900
+      # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
+      - xingbangda,xbd599
+
+  port: true
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vcc-supply:
+    description: Panel power supply
+
+  iovcc-supply:
+    description: I/O voltage supply
+
+  reset-gpios: true
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - iovcc-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "rocktech,jh057n00900";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt b/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt
deleted file mode 100644
index eb1fb9f8d1f4..000000000000
--- a/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-Required properties:
-- compatible: should be "rocktech,rk070er9427"
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Optional nodes:
-- Video port for LCD panel input.
-
-Example:
-	panel {
-		compatible = "rocktech,rk070er9427";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
new file mode 100644
index 000000000000..ccc482570d6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,amoled-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMOLED MIPI-DSI panels
+
+maintainers:
+  - Hoegeun Kwon <hoegeun.kwon@samsung.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s6e3ha2
+              - samsung,s6e3hf2
+    then:
+      required:
+        - enable-gpios
+
+properties:
+  compatible:
+    enum:
+        # Samsung S6E63J0X03 1.63" 320x320 AMOLED panel
+      - samsung,s6e63j0x03
+        # Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+      - samsung,s6e3ha2
+        # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
+      - samsung,s6e3hf2
+
+  reg: true
+  reset-gpios: true
+  enable-gpios: true
+  te-gpios: true
+
+  vdd3-supply:
+    description: I/O voltage supply
+
+  vci-supply:
+    description: voltage supply for analog circuits
+
+required:
+  - compatible
+  - reg
+  - vdd3-supply
+  - vci-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6e3ha2";
+            reg = <0>;
+            vdd3-supply = <&ldo27_reg>;
+            vci-supply = <&ldo28_reg>;
+            reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+            te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
deleted file mode 100644
index 354d4d1df4ff..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
-
-Required properties:
-  - compatible: "samsung,ld9040"
-  - reg: address of the panel on SPI bus
-  - vdd3-supply: core voltage supply
-  - vci-supply: voltage supply for analog circuits
-  - reset-gpios: a GPIO spec for the reset pin
-  - display-timings: timings for the connected panel according to [1]
-
-The panel must obey rules for SPI slave device specified in document [2].
-
-Optional properties:
-  - power-on-delay: delay after turning regulators on [ms]
-  - reset-delay: delay after reset sequence [ms]
-  - panel-width-mm: physical panel width [mm]
-  - panel-height-mm: physical panel height [mm]
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [3]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-[2]: Documentation/devicetree/bindings/spi/spi-bus.txt
-[3]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	lcd@0 {
-		compatible = "samsung,ld9040";
-		reg = <0>;
-		vdd3-supply = <&ldo7_reg>;
-		vci-supply = <&ldo17_reg>;
-		reset-gpios = <&gpy4 5 0>;
-		spi-max-frequency = <1200000>;
-		spi-cpol;
-		spi-cpha;
-		power-on-delay = <10>;
-		reset-delay = <10>;
-		panel-width-mm = <90>;
-		panel-height-mm = <154>;
-
-		display-timings {
-			timing {
-				clock-frequency = <23492370>;
-				hactive = <480>;
-				vactive = <800>;
-				hback-porch = <16>;
-				hfront-porch = <16>;
-				vback-porch = <2>;
-				vfront-porch = <28>;
-				hsync-len = <2>;
-				vsync-len = <1>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <0>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			lcd_ep: endpoint {
-				remote-endpoint = <&fimd_dpi_ep>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
new file mode 100644
index 000000000000..c0fabeb38628
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ld9040.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
+
+maintainers:
+  - Andrzej Hajda <a.hajda@samsung.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: samsung,ld9040
+
+  display-timings: true
+  port: true
+  reg: true
+  reset-gpios: true
+
+  vdd3-supply:
+    description: core voltage supply
+
+  vci-supply:
+    description: voltage supply for analog circuits
+
+  power-on-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: delay after turning regulators on [ms]
+
+  reset-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: delay after reset sequence [ms]
+
+  panel-width-mm:
+    description: physical panel width [mm]
+
+  panel-height-mm:
+    description: physical panel height [mm]
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+  - vdd3-supply
+  - vci-supply
+  - reset-gpios
+  - display-timings
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lcd@0 {
+            compatible = "samsung,ld9040";
+
+            reg = <0>;
+            vdd3-supply = <&ldo7_reg>;
+            vci-supply = <&ldo17_reg>;
+            reset-gpios = <&gpy4 5 0>;
+            spi-max-frequency = <1200000>;
+            spi-cpol;
+            spi-cpha;
+            power-on-delay = <10>;
+            reset-delay = <10>;
+            panel-width-mm = <90>;
+            panel-height-mm = <154>;
+
+            display-timings {
+                timing {
+                    clock-frequency = <23492370>;
+                    hactive = <480>;
+                    vactive = <800>;
+                    hback-porch = <16>;
+                    hfront-porch = <16>;
+                    vback-porch = <2>;
+                    vfront-porch = <28>;
+                    hsync-len = <2>;
+                    vsync-len = <1>;
+                    hsync-active = <0>;
+                    vsync-active = <0>;
+                    de-active = <0>;
+                    pixelclk-active = <0>;
+                };
+            };
+
+            port {
+                lcd_ep: endpoint {
+                    remote-endpoint = <&fimd_dpi_ep>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
new file mode 100644
index 000000000000..251f0c7115aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,lms380kf01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LMS380KF01 display panel
+
+description: The LMS380KF01 is a 480x800 DPI display panel from Samsung Mobile
+  Displays (SMD) utilizing the WideChips WS2401 display controller. It can be
+  used with internal or external backlight control.
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,lms380kf01
+
+  reg: true
+
+  interrupts:
+    description: provides an optional ESD (electrostatic discharge)
+      interrupt that signals abnormalities in the display hardware.
+      This can also be raised for other reasons like erroneous
+      configuration.
+    maxItems: 1
+
+  reset-gpios: true
+
+  vci-supply:
+    description: regulator that supplies the VCI analog voltage
+      usually around 3.0 V
+
+  vccio-supply:
+    description: regulator that supplies the VCCIO voltage usually
+      around 1.8 V
+
+  backlight: true
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    maximum: 1200000
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - spi-cpol
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        compatible = "spi-gpio";
+        sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+        miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+        mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+        cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+        num-chipselects = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,lms380kf01";
+            spi-max-frequency = <1200000>;
+            spi-cpha;
+            spi-cpol;
+            reg = <0>;
+            vci-supply = <&lcd_3v0_reg>;
+            vccio-supply = <&lcd_1v8_reg>;
+            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+            interrupt-parent = <&gpio>;
+            interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
new file mode 100644
index 000000000000..cd62968426fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,lms397kf04.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LMS397KF04 display panel
+
+description: The datasheet claims this is based around a display controller
+  named DB7430 with a separate backlight controller.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,lms397kf04
+
+  reg: true
+
+  reset-gpios: true
+
+  vci-supply:
+    description: regulator that supplies the VCI analog voltage
+      usually around 3.0 V
+
+  vccio-supply:
+    description: regulator that supplies the VCCIO voltage usually
+      around 1.8 V
+
+  backlight: true
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    description: inherited as a SPI client node, the datasheet specifies
+      maximum 300 ns minimum cycle which gives around 3 MHz max frequency
+    maximum: 3000000
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - spi-cpol
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      compatible = "spi-gpio";
+      sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+      miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+      mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+      cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+      num-chipselects = <1>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "samsung,lms397kf04";
+        spi-max-frequency = <3000000>;
+        spi-cpha;
+        spi-cpol;
+        reg = <0>;
+        vci-supply = <&lcd_3v0_reg>;
+        vccio-supply = <&lcd_1v8_reg>;
+        reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+        backlight = <&ktd259>;
+
+        port {
+          panel_in: endpoint {
+            remote-endpoint = <&display_out>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt b/Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt
deleted file mode 100644
index dba298b43b24..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Samsung 12.2" (2560x1600 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "samsung,lsn122dl01-c01"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt b/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt
deleted file mode 100644
index ef522c6bb85f..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Samsung Electronics 10.1" WSVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "samsung,ltn101nt05"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt b/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt
deleted file mode 100644
index e7f969d891cc..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
-
-Required properties:
-- compatible: should be "samsung,ltn140at29-301"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt
deleted file mode 100644
index b94e366f451b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Samsung S6D16D0 4" 864x480 AMOLED panel
-
-Required properties:
-  - compatible: should be:
-    "samsung,s6d16d0",
-  - reg: the virtual channel number of a DSI peripheral
-  - vdd1-supply: I/O voltage supply
-  - reset-gpios: a GPIO spec for the reset pin (active low)
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in
-media/video-interfaces.txt. This node should describe panel's video bus.
-
-Example:
-&dsi {
-	...
-
-	panel@0 {
-		compatible = "samsung,s6d16d0";
-		reg = <0>;
-		vdd1-supply = <&foo>;
-		reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml
new file mode 100644
index 000000000000..66d147496bc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d16d0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D16D0 4" 864x480 AMOLED panel
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6d16d0
+
+  port: true
+  reg: true
+  reset-gpios: true
+
+  vdd1-supply:
+    description: I/O voltage supply
+
+required:
+  - compatible
+  - reg
+  - vdd1-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6d16d0";
+            reg = <0>;
+            vdd1-supply = <&foo>;
+            reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
new file mode 100644
index 000000000000..26e3c820a2f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d27a1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D27A1 display panel
+
+description: The S6D27A1 is a 480x800 DPI display panel from Samsung Mobile
+  Displays (SMD). The panel must obey the rules for a SPI slave device
+  as specified in spi/spi-controller.yaml
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6d27a1
+
+  reg: true
+
+  interrupts:
+    description: provides an optional ESD (electrostatic discharge)
+      interrupt that signals abnormalities in the display hardware.
+      This can also be raised for other reasons like erroneous
+      configuration.
+    maxItems: 1
+
+  reset-gpios: true
+
+  vci-supply:
+    description: regulator that supplies the VCI analog voltage
+      usually around 3.0 V
+
+  vccio-supply:
+    description: regulator that supplies the VCCIO voltage usually
+      around 1.8 V
+
+  backlight: true
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    maximum: 1200000
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vci-supply
+  - vccio-supply
+  - spi-cpha
+  - spi-cpol
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        compatible = "spi-gpio";
+        sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+        miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+        mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+        cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+        num-chipselects = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "samsung,s6d27a1";
+            spi-max-frequency = <1200000>;
+            spi-cpha;
+            spi-cpol;
+            reg = <0>;
+            vci-supply = <&lcd_3v0_reg>;
+            vccio-supply = <&lcd_1v8_reg>;
+            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+            interrupt-parent = <&gpio>;
+            interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
deleted file mode 100644
index 4acea25c244b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
-Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
-
-Required properties:
-  - compatible: should be one of:
-    "samsung,s6e3ha2",
-    "samsung,s6e3hf2".
-  - reg: the virtual channel number of a DSI peripheral
-  - vdd3-supply: I/O voltage supply
-  - vci-supply: voltage supply for analog circuits
-  - reset-gpios: a GPIO spec for the reset pin (active low)
-  - enable-gpios: a GPIO spec for the panel enable pin (active high)
-
-Optional properties:
-  - te-gpios: a GPIO spec for the tearing effect synchronization signal
-    gpio pin (active high)
-
-Example:
-&dsi {
-	...
-
-	panel@0 {
-		compatible = "samsung,s6e3ha2";
-		reg = <0>;
-		vdd3-supply = <&ldo27_reg>;
-		vci-supply = <&ldo28_reg>;
-		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
-		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
-		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
deleted file mode 100644
index 3f1a8392af7f..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode)
-
-Required properties:
-  - compatible: "samsung,s6e63j0x03"
-  - reg: the virtual channel number of a DSI peripheral
-  - vdd3-supply: I/O voltage supply
-  - vci-supply: voltage supply for analog circuits
-  - reset-gpios: a GPIO spec for the reset pin (active low)
-  - te-gpios: a GPIO spec for the tearing effect synchronization signal
-    gpio pin (active high)
-
-Example:
-&dsi {
-	...
-
-	panel@0 {
-		compatible = "samsung,s6e63j0x03";
-		reg = <0>;
-		vdd3-supply = <&ldo16_reg>;
-		vci-supply = <&ldo20_reg>;
-		reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
-		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
deleted file mode 100644
index 9fb9ebeef8e4..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Samsung s6e63m0 AMOLED LCD panel
-
-Required properties:
-  - compatible: "samsung,s6e63m0"
-  - reset-gpios: GPIO spec for reset pin
-  - vdd3-supply: VDD regulator
-  - vci-supply: VCI regulator
-
-The panel must obey rules for SPI slave device specified in document [1].
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [2]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-		s6e63m0: display@0 {
-			compatible = "samsung,s6e63m0";
-			reg = <0>;
-			reset-gpio = <&mp05 5 1>;
-			vdd3-supply = <&ldo12_reg>;
-			vci-supply = <&ldo11_reg>;
-			spi-max-frequency = <1200000>;
-
-			port {
-				lcd_ep: endpoint {
-					remote-endpoint = <&fimd_ep>;
-				};
-			};
-		};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
new file mode 100644
index 000000000000..6f1fc7469f07
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e63m0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung s6e63m0 AMOLED LCD panel
+
+maintainers:
+  - Jonathan Bakker <xc-racer2@live.ca>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/leds/backlight/common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6e63m0
+
+  reg: true
+  reset-gpios: true
+  port: true
+  default-brightness: true
+  max-brightness: true
+
+  spi-3wire: true
+  spi-cpha: true
+  spi-cpol: true
+
+  vdd3-supply:
+    description: VDD regulator
+
+  vci-supply:
+    description: VCI regulator
+
+required:
+  - compatible
+  - reset-gpios
+  - vdd3-supply
+  - vci-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "samsung,s6e63m0";
+            reg = <0>;
+            reset-gpios = <&mp05 5 1>;
+            vdd3-supply = <&ldo12_reg>;
+            vci-supply = <&ldo11_reg>;
+            spi-max-frequency = <1200000>;
+
+            port {
+                lcd_ep: endpoint {
+                    remote-endpoint = <&fimd_ep>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
new file mode 100644
index 000000000000..44ce98f68705
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e88a0-ams452ef01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS452EF01 AMOLED panel with S6E88A0 video mode DSI controller
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6e88a0-ams452ef01
+  reg: true
+  reset-gpios: true
+  vdd3-supply:
+    description: core voltage supply
+  vci-supply:
+    description: voltage supply for analog circuits
+
+required:
+  - compatible
+  - reg
+  - vdd3-supply
+  - vci-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            panel@0 {
+                    reg = <0>;
+
+                    compatible = "samsung,s6e88a0-ams452ef01";
+
+                    vdd3-supply = <&pm8916_l17>;
+                    vci-supply = <&reg_vlcd_vci>;
+                    reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt
deleted file mode 100644
index 9e766c5f86da..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Samsung S6E8AA0 AMOLED LCD 5.3 inch panel
-
-Required properties:
-  - compatible: "samsung,s6e8aa0"
-  - reg: the virtual channel number of a DSI peripheral
-  - vdd3-supply: core voltage supply
-  - vci-supply: voltage supply for analog circuits
-  - reset-gpios: a GPIO spec for the reset pin
-  - display-timings: timings for the connected panel as described by [1]
-
-Optional properties:
-  - power-on-delay: delay after turning regulators on [ms]
-  - reset-delay: delay after reset sequence [ms]
-  - init-delay: delay after initialization sequence [ms]
-  - panel-width-mm: physical panel width [mm]
-  - panel-height-mm: physical panel height [mm]
-  - flip-horizontal: boolean to flip image horizontally
-  - flip-vertical: boolean to flip image vertically
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [2]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	panel {
-		compatible = "samsung,s6e8aa0";
-		reg = <0>;
-		vdd3-supply = <&vcclcd_reg>;
-		vci-supply = <&vlcd_reg>;
-		reset-gpios = <&gpy4 5 0>;
-		power-on-delay= <50>;
-		reset-delay = <100>;
-		init-delay = <100>;
-		panel-width-mm = <58>;
-		panel-height-mm = <103>;
-		flip-horizontal;
-		flip-vertical;
-
-		display-timings {
-			timing0: timing-0 {
-				clock-frequency = <57153600>;
-				hactive = <720>;
-				vactive = <1280>;
-				hfront-porch = <5>;
-				hback-porch = <5>;
-				hsync-len = <5>;
-				vfront-porch = <13>;
-				vback-porch = <1>;
-				vsync-len = <2>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
new file mode 100644
index 000000000000..1cdc91b3439f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e8aa0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6E8AA0 AMOLED LCD 5.3 inch panel
+
+maintainers:
+  - Andrzej Hajda <a.hajda@samsung.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6e8aa0
+
+  reg: true
+  reset-gpios: true
+  display-timings: true
+
+  vdd3-supply:
+    description: core voltage supply
+
+  vci-supply:
+    description: voltage supply for analog circuits
+
+  power-on-delay:
+    description: delay after turning regulators on [ms]
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  reset-delay:
+    description: delay after reset sequence [ms]
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  init-delay:
+    description: delay after initialization sequence [ms]
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  panel-width-mm:
+    description: physical panel width [mm]
+
+  panel-height-mm:
+    description: physical panel height [mm]
+
+  flip-horizontal:
+    description: boolean to flip image horizontally
+    type: boolean
+
+  flip-vertical:
+    description: boolean to flip image vertically
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - vdd3-supply
+  - vci-supply
+  - reset-gpios
+  - display-timings
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6e8aa0";
+            reg = <0>;
+            vdd3-supply = <&vcclcd_reg>;
+            vci-supply = <&vlcd_reg>;
+            reset-gpios = <&gpy4 5 0>;
+            power-on-delay= <50>;
+            reset-delay = <100>;
+            init-delay = <100>;
+            panel-width-mm = <58>;
+            panel-height-mm = <103>;
+            flip-horizontal;
+            flip-vertical;
+
+            display-timings {
+                timing0: timing-0 {
+                    clock-frequency = <57153600>;
+                    hactive = <720>;
+                    vactive = <1280>;
+                    hfront-porch = <5>;
+                    hback-porch = <5>;
+                    hsync-len = <5>;
+                    vfront-porch = <13>;
+                    vback-porch = <1>;
+                    vsync-len = <2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt
deleted file mode 100644
index aae57ef36cdd..000000000000
--- a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel
-
-Required properties:
-- compatible: should be "sii,43wvf1g".
-- "dvdd-supply": 3v3 digital regulator.
-- "avdd-supply": 5v analog regulator.
-
-Optional properties:
-- backlight: phandle for the backlight control.
-
-Example:
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml
new file mode 100644
index 000000000000..cfaa50cf5f5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/seiko,43wvf1g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel
+
+maintainers:
+  - Marco Franchi <marco.franchi@nxp.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sii,43wvf1g
+
+  backlight: true
+  port: true
+
+  dvdd-supply:
+    description: 3v3 digital regulator
+
+  avdd-supply:
+    description: 5v analog regulator
+
+required:
+  - compatible
+  - dvdd-supply
+  - avdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    panel {
+        compatible = "sii,43wvf1g";
+
+        backlight = <&backlight_display>;
+        dvdd-supply = <&reg_lcd_3v3>;
+        avdd-supply = <&reg_lcd_5v>;
+        port {
+            panel_in: endpoint {
+                remote-endpoint = <&display_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
index e63a570ae59d..2e75e3738ff0 100644
--- a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
@@ -7,17 +7,27 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Solomon Goldentek Display GKTW70SDAE4SE 7" WVGA LVDS Display Panel
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: sgd,gktw70sdae4se
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: sgd,gktw70sdae4se
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   data-mapping:
     const: jeida-18
@@ -35,6 +45,11 @@ additionalProperties: false
 
 required:
   - compatible
+  - port
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt
deleted file mode 100644
index 0753f6967279..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,lq035q7db03"
-- power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties:
-- enable-gpios: GPIO pin to enable or disable the panel
-- backlight: phandle of the backlight device attached to the panel
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt
deleted file mode 100644
index 95534b55ee5f..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,lq070y3dg3b"
-
-Optional properties:
-- enable-gpios: GPIO pin to enable or disable the panel
-- backlight: phandle of the backlight device attached to the panel
-- power-supply: phandle of the regulator that provides the supply voltage
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt
deleted file mode 100644
index 4aff25b8dfe6..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,lq101k1ly04"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt
deleted file mode 100644
index f522bb8e47e1..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Sharp Microelectronics 10.1" WQXGA TFT LCD panel
-
-This panel requires a dual-channel DSI host to operate. It supports two modes:
-- left-right: each channel drives the left or right half of the screen
-- even-odd: each channel drives the even or odd lines of the screen
-
-Each of the DSI channels controls a separate DSI peripheral. The peripheral
-driven by the first link (DSI-LINK1), left or even, is considered the primary
-peripheral and controls the device. The 'link2' property contains a phandle
-to the peripheral driven by the second link (DSI-LINK2, right or odd).
-
-Note that in video mode the DSI-LINK1 interface always provides the left/even
-pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
-is possible to program either link to drive the left/even or right/odd pixels
-but for the sake of consistency this binding assumes that the same assignment
-is chosen as for video mode.
-
-Required properties:
-- compatible: should be "sharp,lq101r1sx01"
-- reg: DSI virtual channel of the peripheral
-
-Required properties (for DSI-LINK1 only):
-- link2: phandle to the DSI peripheral on the secondary link. Note that the
-  presence of this property marks the containing node as DSI-LINK1.
-- power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties (for DSI-LINK1 only):
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
-
-	dsi@54300000 {
-		panel: panel@0 {
-			compatible = "sharp,lq101r1sx01";
-			reg = <0>;
-
-			link2 = <&secondary>;
-
-			power-supply = <...>;
-			backlight = <...>;
-		};
-	};
-
-	dsi@54400000 {
-		secondary: panel@0 {
-			compatible = "sharp,lq101r1sx01";
-			reg = <0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml
new file mode 100644
index 000000000000..9ec0e8aae4c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,lq101r1sx01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 10.1" WQXGA TFT LCD panel
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+
+description: |
+  This panel requires a dual-channel DSI host to operate. It supports two modes:
+  - left-right: each channel drives the left or right half of the screen
+  - even-odd: each channel drives the even or odd lines of the screen
+
+  Each of the DSI channels controls a separate DSI peripheral. The peripheral
+  driven by the first link (DSI-LINK1), left or even, is considered the primary
+  peripheral and controls the device. The 'link2' property contains a phandle
+  to the peripheral driven by the second link (DSI-LINK2, right or odd).
+
+  Note that in video mode the DSI-LINK1 interface always provides the left/even
+  pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
+  is possible to program either link to drive the left/even or right/odd pixels
+  but for the sake of consistency this binding assumes that the same assignment
+  is chosen as for video mode.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: sharp,lq101r1sx03
+          - const: sharp,lq101r1sx01
+      - items:
+          - const: sharp,lq101r1sx01
+
+  reg: true
+  power-supply: true
+  backlight: true
+
+  link2:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to the DSI peripheral on the secondary link. Note that the
+      presence of this property marks the containing node as DSI-LINK1
+
+required:
+  - compatible
+  - reg
+
+if:
+  required:
+    - link2
+then:
+  required:
+    - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi0: dsi@fd922800 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xfd922800 0x200>;
+
+        panel: panel@0 {
+            compatible = "sharp,lq101r1sx01";
+            reg = <0>;
+
+            link2 = <&secondary>;
+
+            power-supply = <&power>;
+            backlight = <&backlight>;
+        };
+    };
+
+    dsi1: dsi@fd922a00 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xfd922a00 0x200>;
+
+        secondary: panel@0 {
+            compatible = "sharp,lq101r1sx01";
+            reg = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt
deleted file mode 100644
index bcb0e8a29f71..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Sharp 12.3" (2400x1600 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,lq123p1jx31"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt
deleted file mode 100644
index 0f57c3143506..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Sharp 15" LQ150X1LG11 XGA TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,lq150x1lg11"
-- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
-
-Optional properties:
-- backlight: phandle of the backlight device
-- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin.
-- sellvds-gpios: a single GPIO for the SELLVDS pin.
-
-If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS
-pins are assumed to be handled appropriately by the hardware.
-
-Example:
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 100000>;                      /* VBR */
-
-		brightness-levels = <0 20 40 60 80 100>;
-		default-brightness-level = <2>;
-
-		power-supply = <&vdd_12v_reg>;               /* VDD */
-		enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;  /* XSTABY */
-	};
-
-	panel {
-		compatible = "sharp,lq150x1lg11";
-
-		power-supply = <&vcc_3v3_reg>;               /* VCC */
-
-		backlight = <&backlight>;
-		rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;    /* RL/UD */
-		sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml
new file mode 100644
index 000000000000..92f2d12f4f4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,lq150x1lg11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp 15" LQ150X1LG11 XGA TFT LCD panel
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,lq150x1lg11
+
+  power-supply: true
+  backlight: true
+
+  rlud-gpios:
+    maxItems: 1
+    description: |
+      GPIO for the RL/UD (rotate 180 degrees) pin.
+      If rlud-gpios and/or sellvds-gpios are not specified,
+      the RL/UD and/or SELLVDS pins are assumed to be handled
+      appropriately by the hardware.
+
+  sellvds-gpios:
+    maxItems: 1
+    description: |
+      GPIO for the SELLVDS pin.
+      If rlud-gpios and/or sellvds-gpios are not specified,
+      the RL/UD and/or SELLVDS pins are assumed to be handled
+      appropriately by the hardware.
+
+required:
+  - compatible
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    panel {
+        compatible = "sharp,lq150x1lg11";
+
+        power-supply = <&vcc_3v3_reg>;               /* VCC */
+
+        backlight = <&backlight>;
+        rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;    /* RL/UD */
+        sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.txt b/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.txt
deleted file mode 100644
index 0cc8981e9d49..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-SHARP LS037V7DW01 TFT-LCD panel
-===================================
-
-Required properties:
-- compatible: "sharp,ls037v7dw01"
-
-Optional properties:
-- label: a symbolic name for the panel
-- enable-gpios: a GPIO spec for the optional enable pin.
-  This pin is the INI pin as specified in the LS037V7DW01.pdf file.
-- reset-gpios: a GPIO spec for the optional reset pin.
-  This pin is the RESB pin as specified in the LS037V7DW01.pdf file.
-- mode-gpios: a GPIO
-  ordered MO, LR, and UD as specified in the LS037V7DW01.pdf file.
-
-Required nodes:
-- Video port for DPI input
-
-This panel can have zero to five GPIOs to configure to change configuration
-between QVGA and VGA mode and the scan direction. As these pins can be also
-configured with external pulls, all the GPIOs are considered optional with holes
-in the array.
-
-Example
--------
-
-Example when connected to a omap2+ based device:
-
-lcd0: display {
-	compatible = "sharp,ls037v7dw01";
-	power-supply = <&lcd_3v3>;
-	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
-	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
-	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
-		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
-		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
-
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&dpi_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.yaml
new file mode 100644
index 000000000000..8c47a9b0b507
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls037v7dw01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SHARP LS037V7DW01 TFT-LCD panel
+
+description: |
+  This panel can have zero to five GPIOs to configure to change configuration
+  between QVGA and VGA mode and the scan direction. As these pins can be also
+  configured with external pulls, all the GPIOs are considered optional with holes
+  in the array.
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,ls037v7dw01
+
+  label: true
+  enable-gpios: true
+  reset-gpios: true
+  port: true
+  power-supply: true
+
+  mode-gpios:
+    minItems: 1
+    maxItems: 3
+    description: |
+      GPIO ordered MO, LR, and UD as specified in LS037V7DW01.pdf
+      This panel can have zero to three GPIOs to configure to
+      change configuration between QVGA and VGA mode and the
+      scan direction. As these pins can be also configured
+      with external pulls, all the GPIOs are considered
+      optional with holes in the array.
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    lcd0: display {
+        compatible = "sharp,ls037v7dw01";
+        power-supply = <&lcd_3v3>;
+        enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;    /* gpio152, lcd INI */
+        reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;     /* gpio155, lcd RESB */
+        mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH        /* gpio154, lcd MO */
+                      &gpio1 2 GPIO_ACTIVE_HIGH         /* gpio2, lcd LR */
+                      &gpio1 3 GPIO_ACTIVE_HIGH>;       /* gpio3, lcd UD */
+
+        port {
+            lcd_in: endpoint {
+                remote-endpoint = <&dpi_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
deleted file mode 100644
index 3770a111968b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Sharp Microelectronics 4.3" qHD TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,ls043t1le01-qhd"
-- reg: DSI virtual channel of the peripheral
-- power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-- reset-gpios: a GPIO spec for the reset pin
-
-Example:
-
-	mdss_dsi@fd922800 {
-		panel@0 {
-			compatible = "sharp,ls043t1le01-qhd";
-			reg = <0>;
-			avdd-supply = <&pm8941_l22>;
-			backlight = <&pm8941_wled>;
-			reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml
new file mode 100644
index 000000000000..a90d0d8bf7c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls043t1le01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 4.3" qHD TFT LCD panel
+
+maintainers:
+  - Werner Johansson <werner.johansson@sonymobile.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,ls043t1le01-qhd
+
+  reg: true
+  backlight: true
+  reset-gpios: true
+  port: true
+
+  avdd-supply:
+    description: handle of the regulator that provides the supply voltage
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls043t1le01-qhd";
+            reg = <0>;
+            avdd-supply = <&pm8941_l22>;
+            backlight = <&pm8941_wled>;
+            reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml
new file mode 100644
index 000000000000..271c097cc9a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls060t1sx01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 6.0" FullHD TFT LCD panel
+
+maintainers:
+  - Dmitry Baryskov <dmitry.baryshkov@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,ls060t1sx01
+
+  reg: true
+  backlight: true
+  reset-gpios: true
+  port: true
+
+  avdd-supply:
+    description: handle of the regulator that provides the positive supply voltage
+  avee-supply:
+    description: handle of the regulator that provides the negative supply voltage
+  vddi-supply:
+    description: handle of the regulator that provides the I/O supply voltage
+  vddh-supply:
+    description: handle of the regulator that provides the analog supply voltage
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls060t1sx01";
+            reg = <0>;
+            avdd-supply = <&pm8941_l22>;
+            backlight = <&backlight>;
+            reset-gpios = <&pm8916_gpios 25 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt b/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt
deleted file mode 100644
index fc1ea9e26c94..000000000000
--- a/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "shelly,sca07010-bfn-lnn"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
deleted file mode 100644
index e11208fb7da8..000000000000
--- a/Documentation/devicetree/bindings/display/panel/simple-panel.txt
+++ /dev/null
@@ -1 +0,0 @@
-See panel-common.yaml in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
deleted file mode 100644
index ccd17597f1f6..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Sitronix ST7701 based LCD panels
-
-ST7701 designed for small and medium sizes of TFT LCD display, is
-capable of supporting up to 480RGBX864 in resolution. It provides
-several system interfaces like MIPI/RGB/SPI.
-
-Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
-inbuilt ST7701 chip.
-
-Required properties:
-- compatible: must be "sitronix,st7701" and one of
-  * "techstar,ts8550b"
-- reset-gpios: a GPIO phandle for the reset pin
-
-Required properties for techstar,ts8550b:
-- reg: DSI virtual channel used by that screen
-- VCC-supply: analog regulator for MIPI circuit
-- IOVCC-supply: I/O system regulator
-
-Optional properties:
-- backlight: phandle for the backlight control.
-
-panel@0 {
-	compatible = "techstar,ts8550b", "sitronix,st7701";
-	reg = <0>;
-	VCC-supply = <&reg_dldo2>;
-	IOVCC-supply = <&reg_dldo2>;
-	reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
-	backlight = <&backlight>;
-};
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
new file mode 100644
index 000000000000..34d5e20c6cb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sitronix,st7701.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7701 based LCD panels
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+
+description: |
+  ST7701 designed for small and medium sizes of TFT LCD display, is
+  capable of supporting up to 480RGBX864 in resolution. It provides
+  several system interfaces like MIPI/RGB/SPI.
+
+  Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
+  inbuilt ST7701 chip.
+
+  Densitron DMT028VGHMCMI-1A is 480x640, 2-lane MIPI DSI LCD panel
+  which has built-in ST7701 chip.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - densitron,dmt028vghmcmi-1a
+          - techstar,ts8550b
+      - const: sitronix,st7701
+
+  reg:
+    description: DSI virtual channel used by that screen
+    maxItems: 1
+
+  VCC-supply:
+    description: analog regulator for MIPI circuit
+
+  IOVCC-supply:
+    description: I/O system regulator
+
+  reset-gpios: true
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - VCC-supply
+  - IOVCC-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "techstar,ts8550b", "sitronix,st7701";
+            reg = <0>;
+            VCC-supply = <&reg_dldo2>;
+            IOVCC-supply = <&reg_dldo2>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+            backlight = <&backlight>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
deleted file mode 100644
index c6995dde641b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Sitronix ST7789V RGB panel with SPI control bus
-
-Required properties:
-  - compatible: "sitronix,st7789v"
-  - reg: Chip select of the panel on the SPI bus
-  - reset-gpios: a GPIO phandle for the reset pin
-  - power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties:
-  - backlight: phandle to the backlight used
-
-The generic bindings for the SPI slaves documented in [1] also applies
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [2]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
-[2]: Documentation/devicetree/bindings/graph.txt
-
-Example:
-
-panel@0 {
-	compatible = "sitronix,st7789v";
-	reg = <0>;
-	reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
-	backlight = <&pwm_bl>;
-	spi-max-frequency = <100000>;
-	spi-cpol;
-	spi-cpha;
-
-	port {
-		panel_input: endpoint {
-			remote-endpoint = <&tcon0_out_panel>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
new file mode 100644
index 000000000000..d984b59daa4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sitronix,st7789v.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7789V RGB panel with SPI control bus
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: sitronix,st7789v
+
+  reg: true
+  reset-gpios: true
+  power-supply: true
+  backlight: true
+  port: true
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - power-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sitronix,st7789v";
+            reg = <0>;
+            reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
+            backlight = <&pwm_bl>;
+            power-supply = <&power>;
+            spi-max-frequency = <100000>;
+            spi-cpol;
+            spi-cpha;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&tcon0_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
index 185dcc8fd1f9..059cc6dbcfca 100644
--- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
@@ -4,7 +4,12 @@
 $id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Sony ACX424AKP 4" 480x864 AMOLED panel
+title: Sony ACX424AKP/ACX424AKM 4" 480x864/480x854 AMOLED panel
+
+description: The Sony ACX424AKP and ACX424AKM are panels built around
+  the Novatek NT35560 display controller. The only difference is that
+  the AKM is configured to use 10 pixels less in the Y axis than the
+  AKP.
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -14,11 +19,13 @@ allOf:
 
 properties:
   compatible:
-    const: sony,acx424akp
+    enum:
+      - sony,acx424akp
+      - sony,acx424akm
   reg: true
   reset-gpios: true
   vddi-supply:
-     description: regulator that supplies the vddi voltage
+    description: regulator that supplies the vddi voltage
   enforce-video-mode: true
 
 required:
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.txt b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.txt
deleted file mode 100644
index e12333280749..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Sony ACX565AKM SDI Panel
-========================
-
-Required properties:
-- compatible: "sony,acx565akm"
-
-Optional properties:
-- label: a symbolic name for the panel
-- reset-gpios: panel reset gpio
-
-Required nodes:
-- Video port for SDI input
-
-Example
--------
-
-acx565akm@2 {
-	compatible = "sony,acx565akm";
-	spi-max-frequency = <6000000>;
-	reg = <2>;
-
-	label = "lcd";
-	reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
-
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&sdi_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
new file mode 100644
index 000000000000..98abdf4ddeac
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,acx565akm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony ACX565AKM SDI Panel
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: sony,acx565akm
+
+  label: true
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@2 {
+            compatible = "sony,acx565akm";
+            spi-max-frequency = <6000000>;
+            reg = <2>;
+
+            label = "lcd";
+            reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+            port {
+                lcd_in: endpoint {
+                    remote-endpoint = <&sdi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml
new file mode 100644
index 000000000000..967972939598
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,tulip-truly-nt35521.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony Tulip Truly NT35521 5.24" 1280x720 MIPI-DSI Panel
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Sony Tulip Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel, which
+  can be found no Sony Xperia M4 phone.  The panel backlight is managed
+  through DSI link.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sony,tulip-truly-nt35521
+
+  reg: true
+
+  positive5-supply:
+    description: Positive 5V supply
+
+  negative5-supply:
+    description: Negative 5V supply
+
+  reset-gpios: true
+
+  enable-gpios: true
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - positive5-supply
+  - negative5-supply
+  - reset-gpios
+  - enable-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sony,tulip-truly-nt35521";
+            reg = <0>;
+            positive5-supply = <&positive5_reg>;
+            negative5-supply = <&negative5_reg>;
+            reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt b/Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt
deleted file mode 100644
index 1e87fe6078af..000000000000
--- a/Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Starry 12.2" (1920x1200 pixels) TFT LCD panel
-
-Required properties:
-- compatible: should be "starry,kr122ea0sra"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt
deleted file mode 100644
index 70cd8d18d841..000000000000
--- a/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "startek,startek-kd050c"
diff --git a/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.yaml b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.yaml
new file mode 100644
index 000000000000..fd668640afd1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/startek,startek-kd050c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel
+
+maintainers:
+  - Nikita Kiryanov <nikita@compulab.co.il>
+
+allOf:
+  - $ref: panel-dpi.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: startek,startek-kd050c
+      - {} # panel-dpi, but not listed here to avoid false select
+
+  backlight: true
+  enable-gpios: true
+  height-mm: true
+  label: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  reset-gpios: true
+  width-mm: true
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt b/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt
deleted file mode 100644
index eb9501a82e25..000000000000
--- a/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "tianma,tm070jdhg30"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt b/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt
deleted file mode 100644
index b25261e63a6d..000000000000
--- a/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "tianma,tm070rvhg71"
-- power-supply: single regulator to provide the supply voltage
-- backlight: phandle of the backlight device attached to the panel
-
-Required nodes:
-- port: LVDS port mapping to connect this display
-
-This panel needs single power supply voltage. Its backlight is conntrolled
-via PWM signal.
-
-Example:
---------
-
-Example device-tree definition when connected to iMX6Q based board
-
-	panel: panel-lvds0 {
-		compatible = "tianma,tm070rvhg71";
-		backlight = <&backlight_lvds>;
-		power-supply = <&reg_lvds>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt
deleted file mode 100644
index 89826116628c..000000000000
--- a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Toshiba 8.9" WXGA (1280x768) TFT LCD panel
-
-Required properties:
-- compatible: should be "toshiba,lt089ac29000"
-- power-supply: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt
deleted file mode 100644
index a2613b9675df..000000000000
--- a/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-TPK U.S.A. LLC Fusion 7" integrated projected capacitive touch display with,
-800 x 480 (WVGA) LCD panel.
-
-Required properties:
-- compatible: should be "tpk,f07a-0102"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt
deleted file mode 100644
index b9d051196ba9..000000000000
--- a/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-TPK U.S.A. LLC Fusion 10.1" integrated projected capacitive touch display with,
-1024 x 600 (WSVGA) LCD panel.
-
-Required properties:
-- compatible: should be "tpk,f10a-0102"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
new file mode 100644
index 000000000000..e8c8ee8d7c88
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/tpo,td.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toppoly TD Panels
+
+maintainers:
+  - Marek Belisko <marek@goldelico.com>
+  - H. Nikolaus Schaller <hns@goldelico.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+        # Toppoly TD028TTEC1 Panel
+      - tpo,td028ttec1
+        # Toppoly TD043MTEA1 Panel
+      - tpo,td043mtea1
+
+  reg: true
+  label: true
+  reset-gpios: true
+  backlight: true
+  port: true
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: panel@0 {
+            compatible = "tpo,td043mtea1";
+            reg = <0>;
+            spi-max-frequency = <100000>;
+            spi-cpol;
+            spi-cpha;
+
+            label = "lcd";
+
+            reset-gpios = <&gpio7 7 0>;
+
+            port {
+                lcd_in: endpoint {
+                    remote-endpoint = <&dpi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt b/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt
deleted file mode 100644
index 898e06ecf4ef..000000000000
--- a/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Toppoly TD028TTEC1 Panel
-========================
-
-Required properties:
-- compatible: "tpo,td028ttec1"
-
-Optional properties:
-- label: a symbolic name for the panel
-- backlight: phandle of the backlight device
-
-Required nodes:
-- Video port for DPI input
-
-Example
--------
-
-lcd-panel: td028ttec1@0 {
-	compatible = "tpo,td028ttec1";
-	reg = <0>;
-	spi-max-frequency = <100000>;
-	spi-cpol;
-	spi-cpha;
-
-	label = "lcd";
-	backlight = <&backlight>;
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&dpi_out>;
-		};
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td043mtea1.txt b/Documentation/devicetree/bindings/display/panel/tpo,td043mtea1.txt
deleted file mode 100644
index ec6d62975162..000000000000
--- a/Documentation/devicetree/bindings/display/panel/tpo,td043mtea1.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-TPO TD043MTEA1 Panel
-====================
-
-Required properties:
-- compatible: "tpo,td043mtea1"
-- reset-gpios: panel reset gpio
-
-Optional properties:
-- label: a symbolic name for the panel
-
-Required nodes:
-- Video port for DPI input
-
-Example
--------
-
-lcd-panel: panel@0 {
-	compatible = "tpo,td043mtea1";
-	reg = <0>;
-	spi-max-frequency = <100000>;
-	spi-cpol;
-	spi-cpha;
-
-	label = "lcd";
-
-	reset-gpios = <&gpio7 7 0>;
-
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&dpi_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
index a51660b73f28..6f1f02044b4b 100644
--- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
+++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
@@ -72,6 +72,8 @@ required:
   - spi-max-frequency
   - port
 
+unevaluatedProperties: false
+
 examples:
   - |+
     spi {
diff --git a/Documentation/devicetree/bindings/display/panel/urt,umsh-8596md.txt b/Documentation/devicetree/bindings/display/panel/urt,umsh-8596md.txt
deleted file mode 100644
index 088a6cea5015..000000000000
--- a/Documentation/devicetree/bindings/display/panel/urt,umsh-8596md.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT LCD panel
-
-Supported are LVDS versions (-11T, -19T) and parallel ones
-(-T, -1T, -7T, -20T).
-
-Required properties:
-- compatible: should be one of:
-  "urt,umsh-8596md-t",
-  "urt,umsh-8596md-1t",
-  "urt,umsh-8596md-7t",
-  "urt,umsh-8596md-11t",
-  "urt,umsh-8596md-19t",
-  "urt,umsh-8596md-20t".
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
new file mode 100644
index 000000000000..076b057b4af5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox model RM69299 Panels Device Tree Bindings.
+
+maintainers:
+  - Harigovindan P <harigovi@codeaurora.org>
+
+description: |
+  This binding is for display panels using a Visionox RM692999 panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,rm69299-1080p-display
+
+  vdda-supply:
+    description: |
+      Phandle of the regulator that provides the vdda supply voltage.
+
+  vdd3p3-supply:
+    description: |
+      Phandle of the regulator that provides the vdd3p3 supply voltage.
+
+  port: true
+  reset-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - vdda-supply
+  - vdd3p3-supply
+  - reset-gpios
+  - port
+
+examples:
+  - |
+    panel {
+        compatible = "visionox,rm69299-1080p-display";
+
+        vdda-supply = <&src_pp1800_l8c>;
+        vdd3p3-supply = <&src_pp2800_l18a>;
+
+        reset-gpios = <&pm6150l_gpio 3 0>;
+        port {
+            panel0_in: endpoint {
+                remote-endpoint = <&dsi0_out>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/vl050_8048nt_c01.txt b/Documentation/devicetree/bindings/display/panel/vl050_8048nt_c01.txt
deleted file mode 100644
index b42bf06bbd99..000000000000
--- a/Documentation/devicetree/bindings/display/panel/vl050_8048nt_c01.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-VXT 800x480 color TFT LCD panel
-
-Required properties:
-- compatible: should be "vxt,vl050-8048nt-c01"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd.txt b/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd.txt
deleted file mode 100644
index 2a7e6e3ba64c..000000000000
--- a/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel
-
-Required properties:
-- compatible: should be "winstar,wf35ltiacd"
-- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
-
-Example:
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 31 63 95 127 159 191 223 255>;
-		default-brightness-level = <191>;
-		power-supply = <&bl_reg>;
-	};
-
-	bl_reg: backlight_regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "backlight-power-supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	panel: panel {
-		compatible = "winstar,wf35ltiacd", "simple-panel";
-		backlight = <&backlight>;
-		power-supply = <&panel_reg>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint {
-				remote-endpoint = <&hlcdc_panel_output>;
-			};
-		};
-	};
-
-	panel_reg: panel_regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "panel-power-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
index 22c91beb0541..d5c46a3cc2b0 100644
--- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -19,9 +19,9 @@ properties:
   backlight: true
   reset-gpios: true
   iovcc-supply:
-     description: regulator that supplies the iovcc voltage
+    description: regulator that supplies the iovcc voltage
   vci-supply:
-     description: regulator that supplies the vci voltage
+    description: regulator that supplies the vci voltage
 
 required:
   - compatible
@@ -34,10 +34,9 @@ additionalProperties: false
 
 examples:
   - |
-    dsi@ff450000 {
+    dsi {
         #address-cells = <1>;
         #size-cells = <0>;
-        reg = <0xff450000 0x1000>;
 
         panel@0 {
             compatible = "xinpeng,xpp055c272";
diff --git a/Documentation/devicetree/bindings/display/renesas,cmm.yaml b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
index a57037b9e9ba..561efaaa5a91 100644
--- a/Documentation/devicetree/bindings/display/renesas,cmm.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
@@ -21,15 +21,15 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - renesas,r8a7795-cmm
-          - renesas,r8a7796-cmm
-          - renesas,r8a77965-cmm
-          - renesas,r8a77990-cmm
-          - renesas,r8a77995-cmm
-        - const: renesas,rcar-gen3-cmm
+          - enum:
+              - renesas,r8a7795-cmm
+              - renesas,r8a7796-cmm
+              - renesas,r8a77965-cmm
+              - renesas,r8a77990-cmm
+              - renesas,r8a77995-cmm
+          - const: renesas,rcar-gen3-cmm
       - items:
-        - const: renesas,rcar-gen2-cmm
+          - const: renesas,rcar-gen2-cmm
 
   reg:
     maxItems: 1
@@ -60,7 +60,7 @@ examples:
     cmm0: cmm@fea40000 {
          compatible = "renesas,r8a7796-cmm",
                       "renesas,rcar-gen3-cmm";
-         reg = <0 0xfea40000 0 0x1000>;
+         reg = <0xfea40000 0x1000>;
          power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
          clocks = <&cpg CPG_MOD 711>;
          resets = <&cpg 711>;
diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
deleted file mode 100644
index eb4ae41fe41f..000000000000
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ /dev/null
@@ -1,129 +0,0 @@
-* Renesas R-Car Display Unit (DU)
-
-Required Properties:
-
-  - compatible: must be one of the following.
-    - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
-    - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU
-    - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
-    - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
-    - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU
-    - "renesas,du-r8a774b1" for R8A774B1 (RZ/G2N) compatible DU
-    - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU
-    - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
-    - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
-    - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
-    - "renesas,du-r8a7792" for R8A7792 (R-Car V2H) compatible DU
-    - "renesas,du-r8a7793" for R8A7793 (R-Car M2-N) compatible DU
-    - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU
-    - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
-    - "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU
-    - "renesas,du-r8a77965" for R8A77965 (R-Car M3-N) compatible DU
-    - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU
-    - "renesas,du-r8a77980" for R8A77980 (R-Car V3H) compatible DU
-    - "renesas,du-r8a77990" for R8A77990 (R-Car E3) compatible DU
-    - "renesas,du-r8a77995" for R8A77995 (R-Car D3) compatible DU
-
-  - reg: the memory-mapped I/O registers base address and length
-
-  - interrupts: Interrupt specifiers for the DU interrupts.
-
-  - clocks: A list of phandles + clock-specifier pairs, one for each entry in
-    the clock-names property.
-  - clock-names: Name of the clocks. This property is model-dependent.
-    - R8A7779 uses a single functional clock. The clock doesn't need to be
-      named.
-    - All other DU instances use one functional clock per channel The
-      functional clocks must be named "du.x" with "x" being the channel
-      numerical index.
-    - In addition to the functional clocks, all DU versions also support
-      externally supplied pixel clocks. Those clocks are optional. When
-      supplied they must be named "dclkin.x" with "x" being the input clock
-      numerical index.
-
-  - renesas,cmms: A list of phandles to the CMM instances present in the SoC,
-    one for each available DU channel. The property shall not be specified for
-    SoCs that do not provide any CMM (such as V3M and V3H).
-
-  - renesas,vsps: A list of phandle and channel index tuples to the VSPs that
-    handle the memory interfaces for the DU channels. The phandle identifies the
-    VSP instance that serves the DU channel, and the channel index identifies
-    the LIF instance in that VSP.
-
-Required nodes:
-
-The connections to the DU output video ports are modeled using the OF graph
-bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-The following table lists for each supported model the port number
-corresponding to each DU output.
-
-                        Port0          Port1          Port2          Port3
------------------------------------------------------------------------------
- R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              -
- R8A7744 (RZ/G1N)       DPAD 0         LVDS 0         -              -
- R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              -
- R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
- R8A774A1 (RZ/G2M)      DPAD 0         HDMI 0         LVDS 0         -
- R8A774B1 (RZ/G2N)      DPAD 0         HDMI 0         LVDS 0         -
- R8A774C0 (RZ/G2E)      DPAD 0         LVDS 0         LVDS 1         -
- R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
- R8A7790 (R-Car H2)     DPAD 0         LVDS 0         LVDS 1         -
- R8A7791 (R-Car M2-W)   DPAD 0         LVDS 0         -              -
- R8A7792 (R-Car V2H)    DPAD 0         DPAD 1         -              -
- R8A7793 (R-Car M2-N)   DPAD 0         LVDS 0         -              -
- R8A7794 (R-Car E2)     DPAD 0         DPAD 1         -              -
- R8A7795 (R-Car H3)     DPAD 0         HDMI 0         HDMI 1         LVDS 0
- R8A7796 (R-Car M3-W)   DPAD 0         HDMI 0         LVDS 0         -
- R8A77965 (R-Car M3-N)  DPAD 0         HDMI 0         LVDS 0         -
- R8A77970 (R-Car V3M)   DPAD 0         LVDS 0         -              -
- R8A77980 (R-Car V3H)   DPAD 0         LVDS 0         -              -
- R8A77990 (R-Car E3)    DPAD 0         LVDS 0         LVDS 1         -
- R8A77995 (R-Car D3)    DPAD 0         LVDS 0         LVDS 1         -
-
-
-Example: R8A7795 (R-Car H3) ES2.0 DU
-
-	du: display@feb00000 {
-		compatible = "renesas,du-r8a7795";
-		reg = <0 0xfeb00000 0 0x80000>;
-		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 724>,
-			 <&cpg CPG_MOD 723>,
-			 <&cpg CPG_MOD 722>,
-			 <&cpg CPG_MOD 721>;
-		clock-names = "du.0", "du.1", "du.2", "du.3";
-		renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>;
-		renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				du_out_rgb: endpoint {
-				};
-			};
-			port@1 {
-				reg = <1>;
-				du_out_hdmi0: endpoint {
-					remote-endpoint = <&dw_hdmi0_in>;
-				};
-			};
-			port@2 {
-				reg = <2>;
-				du_out_hdmi1: endpoint {
-					remote-endpoint = <&dw_hdmi1_in>;
-				};
-			};
-			port@3 {
-				reg = <3>;
-				du_out_lvds0: endpoint {
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml
new file mode 100644
index 000000000000..b3e588022082
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
@@ -0,0 +1,865 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,du.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Display Unit (DU)
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  These DT bindings describe the Display Unit embedded in the Renesas R-Car
+  Gen1, R-Car Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs.
+
+properties:
+  compatible:
+    enum:
+      - renesas,du-r8a7742 # for RZ/G1H compatible DU
+      - renesas,du-r8a7743 # for RZ/G1M compatible DU
+      - renesas,du-r8a7744 # for RZ/G1N compatible DU
+      - renesas,du-r8a7745 # for RZ/G1E compatible DU
+      - renesas,du-r8a77470 # for RZ/G1C compatible DU
+      - renesas,du-r8a774a1 # for RZ/G2M compatible DU
+      - renesas,du-r8a774b1 # for RZ/G2N compatible DU
+      - renesas,du-r8a774c0 # for RZ/G2E compatible DU
+      - renesas,du-r8a774e1 # for RZ/G2H compatible DU
+      - renesas,du-r8a7779 # for R-Car H1 compatible DU
+      - renesas,du-r8a7790 # for R-Car H2 compatible DU
+      - renesas,du-r8a7791 # for R-Car M2-W compatible DU
+      - renesas,du-r8a7792 # for R-Car V2H compatible DU
+      - renesas,du-r8a7793 # for R-Car M2-N compatible DU
+      - renesas,du-r8a7794 # for R-Car E2 compatible DU
+      - renesas,du-r8a7795 # for R-Car H3 compatible DU
+      - renesas,du-r8a7796 # for R-Car M3-W compatible DU
+      - renesas,du-r8a77961 # for R-Car M3-W+ compatible DU
+      - renesas,du-r8a77965 # for R-Car M3-N compatible DU
+      - renesas,du-r8a77970 # for R-Car V3M compatible DU
+      - renesas,du-r8a77980 # for R-Car V3H compatible DU
+      - renesas,du-r8a77990 # for R-Car E3 compatible DU
+      - renesas,du-r8a77995 # for R-Car D3 compatible DU
+      - renesas,du-r8a779a0 # for R-Car V3U compatible DU
+
+  reg:
+    maxItems: 1
+
+  # See compatible-specific constraints below.
+  clocks: true
+  clock-names: true
+  interrupts:
+    description: Interrupt specifiers, one per DU channel
+  resets: true
+  reset-names: true
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      The connections to the DU output video ports are modeled using the OF
+      graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+      The number of ports and their assignment are model-dependent. Each port
+      shall have a single endpoint.
+
+    patternProperties:
+      "^port@[0-3]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+
+    required:
+      - port@0
+      - port@1
+
+    unevaluatedProperties: false
+
+  renesas,cmms:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      maxItems: 1
+    description:
+      A list of phandles to the CMM instances present in the SoC, one for each
+      available DU channel.
+
+  renesas,vsps:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      items:
+        - description: phandle to VSP instance that serves the DU channel
+        - description: Channel index identifying the LIF instance in that VSP
+    description:
+      A list of phandle and channel index tuples to the VSPs that handle the
+      memory interfaces for the DU channels.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,du-r8a7779
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          items:
+            - description: Functional clock
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+
+        clock-names:
+          minItems: 1
+          items:
+            - const: du.0
+            - pattern: '^dclkin\.[01]$'
+            - pattern: '^dclkin\.[01]$'
+
+        interrupts:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: DPAD 1
+            # port@2 is TCON, not supported yet
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+
+      required:
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a7743
+              - renesas,du-r8a7744
+              - renesas,du-r8a7791
+              - renesas,du-r8a7793
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+
+        clock-names:
+          minItems: 2
+          items:
+            - const: du.0
+            - const: du.1
+            - pattern: '^dclkin\.[01]$'
+            - pattern: '^dclkin\.[01]$'
+
+        interrupts:
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: LVDS 0
+            # port@2 is TCON, not supported yet
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a7745
+              - renesas,du-r8a7792
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+
+        clock-names:
+          minItems: 2
+          items:
+            - const: du.0
+            - const: du.1
+            - pattern: '^dclkin\.[01]$'
+            - pattern: '^dclkin\.[01]$'
+
+        interrupts:
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: DPAD 1
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a7794
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+
+        clock-names:
+          minItems: 2
+          items:
+            - const: du.0
+            - const: du.1
+            - pattern: '^dclkin\.[01]$'
+            - pattern: '^dclkin\.[01]$'
+
+        interrupts:
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: DPAD 1
+            # port@2 is TCON, not supported yet
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a77470
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+
+        clock-names:
+          minItems: 2
+          items:
+            - const: du.0
+            - const: du.1
+            - pattern: '^dclkin\.[01]$'
+            - pattern: '^dclkin\.[01]$'
+
+        interrupts:
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: DPAD 1
+            port@2:
+              description: LVDS 0
+            # port@3 is DVENC, not supported yet
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a7742
+              - renesas,du-r8a7790
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: Functional clock for DU2
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+            - description: DU_DOTCLKIN2 input clock
+
+        clock-names:
+          minItems: 3
+          items:
+            - const: du.0
+            - const: du.1
+            - const: du.2
+            - pattern: '^dclkin\.[012]$'
+            - pattern: '^dclkin\.[012]$'
+            - pattern: '^dclkin\.[012]$'
+
+        interrupts:
+          maxItems: 3
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: LVDS 0
+            port@2:
+              description: LVDS 1
+            # port@3 is TCON, not supported yet
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a7795
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: Functional clock for DU2
+            - description: Functional clock for DU4
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+            - description: DU_DOTCLKIN2 input clock
+            - description: DU_DOTCLKIN3 input clock
+
+        clock-names:
+          minItems: 4
+          items:
+            - const: du.0
+            - const: du.1
+            - const: du.2
+            - const: du.3
+            - pattern: '^dclkin\.[0123]$'
+            - pattern: '^dclkin\.[0123]$'
+            - pattern: '^dclkin\.[0123]$'
+            - pattern: '^dclkin\.[0123]$'
+
+        interrupts:
+          maxItems: 4
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          items:
+            - const: du.0
+            - const: du.2
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: HDMI 0
+            port@2:
+              description: HDMI 1
+            port@3:
+              description: LVDS 0
+
+          required:
+            - port@0
+            - port@1
+            - port@2
+            - port@3
+
+        renesas,cmms:
+          minItems: 4
+
+        renesas,vsps:
+          minItems: 4
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a774a1
+              - renesas,du-r8a7796
+              - renesas,du-r8a77961
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: Functional clock for DU2
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+            - description: DU_DOTCLKIN2 input clock
+
+        clock-names:
+          minItems: 3
+          items:
+            - const: du.0
+            - const: du.1
+            - const: du.2
+            - pattern: '^dclkin\.[012]$'
+            - pattern: '^dclkin\.[012]$'
+            - pattern: '^dclkin\.[012]$'
+
+        interrupts:
+          maxItems: 3
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          items:
+            - const: du.0
+            - const: du.2
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: HDMI 0
+            port@2:
+              description: LVDS 0
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+        renesas,cmms:
+          minItems: 3
+
+        renesas,vsps:
+          minItems: 3
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a774b1
+              - renesas,du-r8a774e1
+              - renesas,du-r8a77965
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: Functional clock for DU3
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+            - description: DU_DOTCLKIN3 input clock
+
+        clock-names:
+          minItems: 3
+          items:
+            - const: du.0
+            - const: du.1
+            - const: du.3
+            - pattern: '^dclkin\.[013]$'
+            - pattern: '^dclkin\.[013]$'
+            - pattern: '^dclkin\.[013]$'
+
+        interrupts:
+          maxItems: 3
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          items:
+            - const: du.0
+            - const: du.3
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: HDMI 0
+            port@2:
+              description: LVDS 0
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+        renesas,cmms:
+          minItems: 3
+
+        renesas,vsps:
+          minItems: 3
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a77970
+              - renesas,du-r8a77980
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          items:
+            - description: Functional clock for DU0
+            - description: DU_DOTCLKIN0 input clock
+
+        clock-names:
+          minItems: 1
+          items:
+            - const: du.0
+            - const: dclkin.0
+
+        interrupts:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: LVDS 0
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+
+        renesas,vsps:
+          minItems: 1
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a774c0
+              - renesas,du-r8a77990
+              - renesas,du-r8a77995
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+
+        clock-names:
+          minItems: 2
+          items:
+            - const: du.0
+            - const: du.1
+            - pattern: '^dclkin\.[01]$'
+            - pattern: '^dclkin\.[01]$'
+
+        interrupts:
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: LVDS 0
+            port@2:
+              description: LVDS 1
+            # port@3 is TCON, not supported yet
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+        renesas,cmms:
+          minItems: 2
+
+        renesas,vsps:
+          minItems: 2
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a779a0
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Functional clock
+
+        clock-names:
+          items:
+            - const: du.0
+
+        interrupts:
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DSI 0
+            port@1:
+              description: DSI 1
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+
+        renesas,vsps:
+          minItems: 2
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
+additionalProperties: false
+
+examples:
+  # R-Car H3 ES2.0 DU
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display@feb00000 {
+        compatible = "renesas,du-r8a7795";
+        reg = <0xfeb00000 0x80000>;
+        interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 724>,
+                 <&cpg CPG_MOD 723>,
+                 <&cpg CPG_MOD 722>,
+                 <&cpg CPG_MOD 721>;
+        clock-names = "du.0", "du.1", "du.2", "du.3";
+        resets = <&cpg 724>, <&cpg 722>;
+        reset-names = "du.0", "du.2";
+
+        renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>;
+        renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&adv7123_in>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dw_hdmi0_in>;
+                };
+            };
+            port@2 {
+                reg = <2>;
+                endpoint {
+                    remote-endpoint = <&dw_hdmi1_in>;
+                };
+            };
+            port@3 {
+                reg = <3>;
+                endpoint {
+                    remote-endpoint = <&lvds0_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
deleted file mode 100644
index 3d32ce137e7f..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-Rockchip DWC HDMI TX Encoder
-============================
-
-The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
-with a companion PHY IP.
-
-These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
-Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
-following device-specific properties.
-
-
-Required properties:
-
-- compatible: should be one of the following:
-		"rockchip,rk3228-dw-hdmi"
-		"rockchip,rk3288-dw-hdmi"
-		"rockchip,rk3328-dw-hdmi"
-		"rockchip,rk3399-dw-hdmi"
-- reg: See dw_hdmi.txt.
-- reg-io-width: See dw_hdmi.txt. Shall be 4.
-- interrupts: HDMI interrupt number
-- clocks: See dw_hdmi.txt.
-- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
-- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0
-  corresponding to the video input of the controller. The port shall have two
-  endpoints, numbered 0 and 1, connected respectively to the vopb and vopl.
-- rockchip,grf: Shall reference the GRF to mux vopl/vopb.
-
-Optional properties
-
-- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
-  or the functionally-reduced I2C master contained in the DWC HDMI. When
-  connected to a system I2C master this property contains a phandle to that
-  I2C master controller.
-- clock-names: See dw_hdmi.txt. The "cec" clock is optional.
-- clock-names: May contain "cec" as defined in dw_hdmi.txt.
-- clock-names: May contain "grf", power for grf io.
-- clock-names: May contain "vpll", external clock for some hdmi phy.
-- phys: from general PHY binding: the phandle for the PHY device.
-- phy-names: Should be "hdmi" if phys references an external phy.
-
-Optional pinctrl entry:
-- If you have both a "unwedge" and "default" pinctrl entry, dw_hdmi
-  will switch to the unwedge pinctrl state for 10ms if it ever gets an
-  i2c timeout.  It's intended that this unwedge pinctrl entry will
-  cause the SDA line to be driven low to work around a hardware
-  errata.
-
-Example:
-
-hdmi: hdmi@ff980000 {
-	compatible = "rockchip,rk3288-dw-hdmi";
-	reg = <0xff980000 0x20000>;
-	reg-io-width = <4>;
-	ddc-i2c-bus = <&i2c5>;
-	rockchip,grf = <&grf>;
-	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
-	clock-names = "iahb", "isfr";
-	ports {
-		hdmi_in: port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			hdmi_in_vopb: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&vopb_out_hdmi>;
-			};
-			hdmi_in_vopl: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&vopl_out_hdmi>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
index 151be3bba06f..9a223df8530c 100644
--- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -8,6 +8,7 @@ Required properties:
 	"rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi"
 	"rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"
 	"rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"
+	"rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"
 - reg: Represent the physical address range of the controller.
 - interrupts: Represent the controller's interrupt to the CPU(s).
 - clocks, clock-names: Phandles to the controller's pll reference
@@ -23,6 +24,7 @@ Required properties:
 Optional properties:
 - phys: from general PHY binding: the phandle for the PHY device.
 - phy-names: Should be "dphy" if phys references an external phy.
+- #phy-cells: Defined when used as ISP phy, should be 0.
 - power-domains: a phandle to mipi dsi power domain node.
 - resets: list of phandle + reset specifier pairs, as described in [3].
 - reset-names: string reset name, must be "apb".
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
new file mode 100644
index 000000000000..7e59dee15a5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DWC HDMI TX Encoder
+
+maintainers:
+  - Mark Yao <markyao0591@gmail.com>
+
+description: |
+  The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+  with a companion PHY IP.
+
+allOf:
+  - $ref: ../bridge/synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3228-dw-hdmi
+      - rockchip,rk3288-dw-hdmi
+      - rockchip,rk3328-dw-hdmi
+      - rockchip,rk3399-dw-hdmi
+      - rockchip,rk3568-dw-hdmi
+
+  reg-io-width:
+    const: 4
+
+  avdd-0v9-supply:
+    description:
+      A 0.9V supply that powers up the SoC internal circuitry. The actual pin name
+      varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes
+      HDMI_AVDD_1V0.
+
+  avdd-1v8-supply:
+    description:
+      A 1.8V supply that powers up the SoC internal circuitry. The pin name on the
+      SoC usually is HDMI_TX_AVDD_1V8.
+
+  clocks:
+    minItems: 2
+    items:
+      - {}
+      - {}
+      # The next three clocks are all optional, but shall be specified in this
+      # order when present.
+      - description: The HDMI CEC controller main clock
+      - description: Power for GRF IO
+      - description: External clock for some HDMI PHY (old clock name, deprecated)
+      - description: External clock for some HDMI PHY (new name)
+
+  clock-names:
+    minItems: 2
+    items:
+      - {}
+      - {}
+      - enum:
+          - cec
+          - grf
+          - vpll
+          - ref
+      - enum:
+          - grf
+          - vpll
+          - ref
+      - enum:
+          - vpll
+          - ref
+
+  ddc-i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The HDMI DDC bus can be connected to either a system I2C master or the
+      functionally-reduced I2C master contained in the DWC HDMI. When connected
+      to a system I2C master this property contains a phandle to that I2C
+      master controller.
+
+  phys:
+    maxItems: 1
+    description: The HDMI PHY
+
+  phy-names:
+    const: hdmi
+
+  pinctrl-names:
+    description:
+      The unwedge pinctrl entry shall drive the DDC SDA line low. This is
+      intended to work around a hardware errata that can cause the DDC I2C
+      bus to be wedged.
+    minItems: 1
+    items:
+      - const: default
+      - const: unwedge
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      "^port(@0)?$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input of the DWC HDMI TX
+        properties:
+          endpoint:
+            description: Connection to the VOP
+          endpoint@0:
+            description: Connection to the VOPB
+          endpoint@1:
+            description: Connection to the VOPL
+    properties:
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output of the DWC HDMI TX
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the GRF to mux vopl/vopb.
+
+required:
+  - compatible
+  - reg
+  - reg-io-width
+  - clocks
+  - clock-names
+  - interrupts
+  - ports
+  - rockchip,grf
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    hdmi: hdmi@ff980000 {
+        compatible = "rockchip,rk3288-dw-hdmi";
+        reg = <0xff980000 0x20000>;
+        reg-io-width = <4>;
+        ddc-i2c-bus = <&i2c5>;
+        rockchip,grf = <&grf>;
+        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+        clock-names = "iahb", "isfr";
+
+        ports {
+            port {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                hdmi_in_vopb: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&vopb_out_hdmi>;
+                };
+                hdmi_in_vopl: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&vopl_out_hdmi>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt
deleted file mode 100644
index d1ad31bca8d9..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Rockchip specific extensions for rk3066 HDMI
-============================================
-
-Required properties:
-- compatible:
-	"rockchip,rk3066-hdmi";
-- reg:
-	Physical base address and length of the controller's registers.
-- clocks, clock-names:
-	Phandle to HDMI controller clock, name should be "hclk".
-- interrupts:
-	HDMI interrupt number.
-- power-domains:
-	Phandle to the RK3066_PD_VIO power domain.
-- rockchip,grf:
-	This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
-- ports:
-	Contains one port node with two endpoints, numbered 0 and 1,
-	connected respectively to vop0 and vop1.
-	Contains one port node with one endpoint
-	connected to a hdmi-connector node.
-- pinctrl-0, pinctrl-name:
-	Switch the iomux for the HPD/I2C pins to HDMI function.
-
-Example:
-	hdmi: hdmi@10116000 {
-		compatible = "rockchip,rk3066-hdmi";
-		reg = <0x10116000 0x2000>;
-		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru HCLK_HDMI>;
-		clock-names = "hclk";
-		power-domains = <&power RK3066_PD_VIO>;
-		rockchip,grf = <&grf>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			hdmi_in: port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				hdmi_in_vop0: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vop0_out_hdmi>;
-				};
-				hdmi_in_vop1: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vop1_out_hdmi>;
-				};
-			};
-			hdmi_out: port@1 {
-				reg = <1>;
-				hdmi_out_con: endpoint {
-					remote-endpoint = <&hdmi_con_in>;
-				};
-			};
-		};
-	};
-
-&pinctrl {
-		hdmi {
-			hdmi_hpd: hdmi-hpd {
-				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
-			};
-			hdmii2c_xfer: hdmii2c-xfer {
-				rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
-						<0 RK_PA2 1 &pcfg_pull_none>;
-			};
-		};
-};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
new file mode 100644
index 000000000000..1a68a940d165
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3066-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3066 HDMI controller
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3066-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: hclk
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with two endpoints, numbered 0 and 1,
+          connected respectively to vop0 and vop1.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a hdmi-connector node.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pinctrl-0
+  - pinctrl-names
+  - power-domains
+  - rockchip,grf
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3066a-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/power/rk3066-power.h>
+    hdmi: hdmi@10116000 {
+      compatible = "rockchip,rk3066-hdmi";
+      reg = <0x10116000 0x2000>;
+      interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_HDMI>;
+      clock-names = "hclk";
+      pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
+      pinctrl-names = "default";
+      power-domains = <&power RK3066_PD_VIO>;
+      rockchip,grf = <&grf>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hdmi_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+          hdmi_in_vop0: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vop0_out_hdmi>;
+          };
+          hdmi_in_vop1: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vop1_out_hdmi>;
+          };
+        };
+        hdmi_out: port@1 {
+          reg = <1>;
+          hdmi_out_con: endpoint {
+            remote-endpoint = <&hdmi_con_in>;
+          };
+        };
+      };
+    };
+
+    pinctrl {
+      hdmi {
+        hdmi_hpd: hdmi-hpd {
+          rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
+        };
+        hdmii2c_xfer: hdmii2c-xfer {
+          rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
+                          <0 RK_PA2 1 &pcfg_pull_none>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt
deleted file mode 100644
index 5707af89319d..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Rockchip DRM master device
-================================
-
-The Rockchip DRM master device is a virtual device needed to list all
-vop devices or other display interface nodes that comprise the
-graphics subsystem.
-
-Required properties:
-- compatible: Should be "rockchip,display-subsystem"
-- ports: Should contain a list of phandles pointing to display interface port
-  of vop devices. vop definitions as defined in
-  Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
-
-example:
-
-display-subsystem {
-	compatible = "rockchip,display-subsystem";
-	ports = <&vopl_out>, <&vopb_out>;
-};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
new file mode 100644
index 000000000000..a8d18a37cb23
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-drm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DRM master device
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The Rockchip DRM master device is a virtual device needed to list all
+  vop devices or other display interface nodes that comprise the
+  graphics subsystem.
+
+properties:
+  compatible:
+    const: rockchip,display-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description: |
+      Should contain a list of phandles pointing to display interface port
+      of vop devices. vop definitions as defined in
+      Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "rockchip,display-subsystem";
+        ports = <&vopl_out>, <&vopb_out>;
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
deleted file mode 100644
index 8b3a5f514205..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-device-tree bindings for rockchip soc display controller (vop)
-
-VOP (Visual Output Processor) is the Display Controller for the Rockchip
-series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of the following
-		"rockchip,rk3036-vop";
-		"rockchip,rk3126-vop";
-		"rockchip,px30-vop-lit";
-		"rockchip,px30-vop-big";
-		"rockchip,rk3066-vop";
-		"rockchip,rk3188-vop";
-		"rockchip,rk3288-vop";
-		"rockchip,rk3368-vop";
-		"rockchip,rk3366-vop";
-		"rockchip,rk3399-vop-big";
-		"rockchip,rk3399-vop-lit";
-		"rockchip,rk3228-vop";
-		"rockchip,rk3328-vop";
-
-- reg: Must contain one entry corresponding to the base address and length
-	of the register space. Can optionally contain a second entry
-	corresponding to the CRTC gamma LUT address.
-
-- interrupts: should contain a list of all VOP IP block interrupts in the
-		 order: VSYNC, LCD_SYSTEM. The interrupt specifier
-		 format depends on the interrupt controller used.
-
-- clocks: must include clock specifiers corresponding to entries in the
-		clock-names property.
-
-- clock-names: Must contain
-		aclk_vop: for ddr buffer transfer.
-		hclk_vop: for ahb bus to R/W the phy regs.
-		dclk_vop: pixel clock.
-
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - axi
-  - ahb
-  - dclk
-
-- iommus: required a iommu node
-
-- port: A port node with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-SoC specific DT entry:
-	vopb: vopb@ff930000 {
-		compatible = "rockchip,rk3288-vop";
-		reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
-		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
-		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
-		reset-names = "axi", "ahb", "dclk";
-		iommus = <&vopb_mmu>;
-		vopb_out: port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			vopb_out_edp: endpoint@0 {
-				reg = <0>;
-				remote-endpoint=<&edp_in_vopb>;
-			};
-			vopb_out_hdmi: endpoint@1 {
-				reg = <1>;
-				remote-endpoint=<&hdmi_in_vopb>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
new file mode 100644
index 000000000000..6f43d885c9b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP)
+
+description:
+  VOP (Video Output Processor) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-vop-big
+      - rockchip,px30-vop-lit
+      - rockchip,rk3036-vop
+      - rockchip,rk3066-vop
+      - rockchip,rk3126-vop
+      - rockchip,rk3188-vop
+      - rockchip,rk3228-vop
+      - rockchip,rk3288-vop
+      - rockchip,rk3328-vop
+      - rockchip,rk3366-vop
+      - rockchip,rk3368-vop
+      - rockchip,rk3399-vop-big
+      - rockchip,rk3399-vop-lit
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to
+          the CRTC gamma LUT address.
+
+  interrupts:
+    maxItems: 1
+    description:
+      The VOP interrupt is shared by several interrupt sources, such as
+      frame start (VSYNC), line flag and other status interrupts.
+
+  clocks:
+    items:
+      - description: Clock for ddr buffer transfer.
+      - description: Pixel clock.
+      - description: Clock for the ahb bus to R/W the phy regs.
+
+  clock-names:
+    items:
+      - const: aclk_vop
+      - const: dclk_vop
+      - const: hclk_vop
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: dclk
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+  assigned-clocks:
+    maxItems: 2
+
+  assigned-clock-rates:
+    maxItems: 2
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3288-power.h>
+    vopb: vopb@ff930000 {
+      compatible = "rockchip,rk3288-vop";
+      reg = <0xff930000 0x19c>,
+            <0xff931000 0x1000>;
+      interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_VOP0>,
+               <&cru DCLK_VOP0>,
+               <&cru HCLK_VOP0>;
+      clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+      power-domains = <&power RK3288_PD_VIO>;
+      resets = <&cru SRST_LCDC1_AXI>,
+               <&cru SRST_LCDC1_AHB>,
+               <&cru SRST_LCDC1_DCLK>;
+      reset-names = "axi", "ahb", "dclk";
+      iommus = <&vopb_mmu>;
+      vopb_out: port {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        vopb_out_edp: endpoint@0 {
+          reg = <0>;
+          remote-endpoint=<&edp_in_vopb>;
+        };
+        vopb_out_hdmi: endpoint@1 {
+          reg = <1>;
+          remote-endpoint=<&hdmi_in_vopb>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
new file mode 100644
index 000000000000..fba45091d909
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP2)
+
+description:
+  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3566-vop
+      - rockchip,rk3568-vop
+
+  reg:
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to
+          the CRTC gamma LUT address.
+
+  reg-names:
+    items:
+      - const: vop
+      - const: gamma-lut
+
+  interrupts:
+    maxItems: 1
+    description:
+      The VOP interrupt is shared by several interrupt sources, such as
+      frame start (VSYNC), line flag and other status interrupts.
+
+  clocks:
+    items:
+      - description: Clock for ddr buffer transfer.
+      - description: Clock for the ahb bus to R/W the phy regs.
+      - description: Pixel clock for video port 0.
+      - description: Pixel clock for video port 1.
+      - description: Pixel clock for video port 2.
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: dclk_vp0
+      - const: dclk_vp1
+      - const: dclk_vp2
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF regs used for misc control
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP2
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/rk3568-cru.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/power/rk3568-power.h>
+        bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            vop: vop@fe040000 {
+                compatible = "rockchip,rk3568-vop";
+                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+                reg-names = "vop", "gamma-lut";
+                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cru ACLK_VOP>,
+                         <&cru HCLK_VOP>,
+                         <&cru DCLK_VOP0>,
+                         <&cru DCLK_VOP1>,
+                         <&cru DCLK_VOP2>;
+                clock-names = "aclk",
+                              "hclk",
+                              "dclk_vp0",
+                              "dclk_vp1",
+                              "dclk_vp2";
+                power-domains = <&power RK3568_PD_VO>;
+                iommus = <&vop_mmu>;
+                vop_out: ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    vp0: port@0 {
+                        reg = <0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp1: port@1 {
+                        reg = <1>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp2: port@2 {
+                        reg = <2>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                };
+            };
+        };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml
new file mode 100644
index 000000000000..458d399cb025
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi-ddc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI DDC
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: samsung,exynos4210-hdmiddc
+      - const: samsung,exynos5-hdmiddc
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ddc@50 {
+            compatible = "samsung,exynos4210-hdmiddc";
+            reg = <0x50>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml
new file mode 100644
index 000000000000..e4a68c5a1a09
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-hdmi
+      - samsung,exynos4212-hdmi
+      - samsung,exynos5420-hdmi
+      - samsung,exynos5433-hdmi
+
+  clocks:
+    minItems: 5
+    maxItems: 10
+
+  clock-names:
+    minItems: 5
+    maxItems: 10
+
+  ddc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the HDMI DDC node.
+
+  hdmi-en-supply:
+    description:
+      Provides voltage source for DCC lines available on HDMI connector. When
+      there is no power provided for DDC epprom, some TV-sets do not pulls up
+      HPD (hot plug detect) line, what causes HDMI block to stay turned off.
+      When provided, the regulator allows TV-set correctly signal HPD event.
+
+  hpd-gpios:
+    maxItems: 1
+    description:
+      A GPIO line connected to HPD
+
+  interrupts:
+    maxItems: 1
+
+  phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the HDMI PHY node.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the PMU system controller node.
+
+  samsung,sysreg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+  '#sound-dai-cells':
+    const: 0
+
+  vdd-supply:
+    description:
+      VDD 1.0V HDMI TX.
+
+  vdd_osc-supply:
+    description:
+      VDD 1.8V HDMI OSC.
+
+  vdd_pll-supply:
+    description:
+      VDD 1.0V HDMI PLL.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ddc
+  - hpd-gpios
+  - interrupts
+  - phy
+  - reg
+  - samsung,syscon-phandle
+  - '#sound-dai-cells'
+  - vdd-supply
+  - vdd_osc-supply
+  - vdd_pll-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-hdmi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Gate of HDMI IP APB bus.
+            - description: Gate of HDMI-PHY IP APB bus.
+            - description: Gate of HDMI TMDS clock.
+            - description: Gate of HDMI pixel clock.
+            - description: TMDS clock generated by HDMI-PHY.
+            - description: MUX used to switch between oscclk and tmds_clko,
+                respectively if HDMI-PHY is off and operational.
+            - description: Pixel clock generated by HDMI-PHY.
+            - description: MUX used to switch between oscclk and pixel_clko,
+                respectively if HDMI-PHY is off and operational.
+            - description: Oscillator clock, used as parent of following *_user
+                clocks in case HDMI-PHY is not operational.
+            - description: Gate of HDMI SPDIF clock.
+        clock-names:
+          items:
+            - const: hdmi_pclk
+            - const: hdmi_i_pclk
+            - const: i_tmds_clk
+            - const: i_pixel_clk
+            - const: tmds_clko
+            - const: tmds_clko_user
+            - const: pixel_clko
+            - const: pixel_clko_user
+            - const: oscclk
+            - const: i_spdif_clk
+      required:
+        - samsung,sysreg-phandle
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Gate of HDMI IP bus clock.
+            - description: Gate of HDMI special clock.
+            - description: Pixel special clock, one of the two possible inputs
+                of HDMI clock mux.
+            - description: HDMI PHY clock output, one of two possible inputs of
+                HDMI clock mux.
+            - description: It is required by the driver to switch between the 2
+                parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
+                after configuration, parent is set to sclk_hdmiphy else
+                sclk_pixel.
+        clock-names:
+          items:
+            - const: hdmi
+            - const: sclk_hdmi
+            - const: sclk_pixel
+            - const: sclk_hdmiphy
+            - const: mout_hdmi
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    hdmi@13970000 {
+        compatible = "samsung,exynos5433-hdmi";
+        reg = <0x13970000 0x70000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cmu_disp CLK_PCLK_HDMI>,
+                 <&cmu_disp CLK_PCLK_HDMIPHY>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
+                 <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
+                 <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
+                 <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
+                 <&xxti>,
+                 <&cmu_disp CLK_SCLK_HDMI_SPDIF>;
+        clock-names = "hdmi_pclk",
+                      "hdmi_i_pclk",
+                      "i_tmds_clk",
+                      "i_pixel_clk",
+                      "tmds_clko",
+                      "tmds_clko_user",
+                      "pixel_clko",
+                      "pixel_clko_user",
+                      "oscclk",
+                      "i_spdif_clk";
+        phy = <&hdmiphy>;
+        ddc = <&hsi2c_11>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+        samsung,sysreg-phandle = <&syscon_disp>;
+        #sound-dai-cells = <0>;
+
+        hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
+        vdd-supply = <&ldo6_reg>;
+        vdd_osc-supply = <&ldo7_reg>;
+        vdd_pll-supply = <&ldo6_reg>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                hdmi_to_tv: endpoint {
+                    remote-endpoint = <&tv_to_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                hdmi_to_mhl: endpoint {
+                    remote-endpoint = <&mhl_to_hdmi>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
new file mode 100644
index 000000000000..25d53fde92e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Mixer
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  Samsung Exynos SoC Mixer is responsible for mixing and blending multiple data
+  inputs before passing it to an output device.  The output is passed to HDMI.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos4210-mixer
+          - samsung,exynos4212-mixer
+          - samsung,exynos5250-mixer
+          - samsung,exynos5420-mixer
+      - const: samsung,exynos5-mixer
+        deprecated: true
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Gate of Mixer IP bus clock.
+      - description: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
+      - description: HDMI Special clock, one of the two possible inputs of
+          mixer mux.
+      - description: Video Processor clock.
+      - description: Mixer mux clock.
+      - description: Mixer Special clock.
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: mixer
+      - const: hdmi
+      - const: sclk_hdmi
+      - const: vp
+      - const: mout_mixer
+      - const: sclk_mixer
+
+  interconnects:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    items:
+      - description: Mixer memory region.
+      - description: Video Processor memory region.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4210-mixer
+              - samsung,exynos4212-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        regs:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4212-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        regs:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5-mixer
+              - samsung,exynos5250-mixer
+              - samsung,exynos5420-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        regs:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mixer@14450000 {
+        compatible = "samsung,exynos5250-mixer";
+        reg = <0x14450000 0x10000>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_MIXER>,
+                 <&clock CLK_HDMI>,
+                 <&clock CLK_SCLK_HDMI>;
+        clock-names = "mixer",
+                      "hdmi",
+                      "sclk_hdmi";
+        iommus = <&sysmmu_tv>;
+        power-domains = <&pd_disp1>;
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml
new file mode 100644
index 000000000000..6380eeebb073
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-decon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC Display and Enhancement Controller (DECON)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  DECON (Display and Enhancement Controller) is the Display Controller for the
+  Exynos5433 series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5433-decon
+      - samsung,exynos5433-decon-tv
+
+  clocks:
+    maxItems: 11
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk_decon
+      - const: aclk_smmu_decon0x
+      - const: aclk_xiu_decon0x
+      - const: pclk_smmu_decon0x
+      - const: aclk_smmu_decon1x
+      - const: aclk_xiu_decon1x
+      - const: pclk_smmu_decon1x
+      - const: sclk_decon_vclk
+      - const: sclk_decon_eclk
+      - const: dsd
+
+  interrupts:
+    minItems: 3
+    maxItems: 4
+    description: |
+      Interrupts depend on mode of work:
+       - video mode: vsync
+       - command mode: lcd_sys
+       - command mode with software trigger: lcd_sys, te
+
+  interrupt-names:
+    minItems: 3
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+      - const: te
+
+  iommus:
+    maxItems: 2
+
+  iommu-names:
+    items:
+      - const: m0
+      - const: m1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,disp-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - ports
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display-controller@13800000 {
+        compatible = "samsung,exynos5433-decon";
+        reg = <0x13800000 0x2104>;
+        clocks = <&cmu_disp CLK_PCLK_DECON>,
+                 <&cmu_disp CLK_ACLK_DECON>,
+                 <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+                 <&cmu_disp CLK_ACLK_XIU_DECON0X>,
+                 <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+                 <&cmu_disp CLK_ACLK_SMMU_DECON1X>,
+                 <&cmu_disp CLK_ACLK_XIU_DECON1X>,
+                 <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
+                 <&cmu_disp CLK_SCLK_DECON_VCLK>,
+                 <&cmu_disp CLK_SCLK_DECON_ECLK>,
+                 <&cmu_disp CLK_SCLK_DSD>;
+        clock-names = "pclk",
+                      "aclk_decon",
+                      "aclk_smmu_decon0x",
+                      "aclk_xiu_decon0x",
+                      "pclk_smmu_decon0x",
+                      "aclk_smmu_decon1x",
+                      "aclk_xiu_decon1x",
+                      "pclk_smmu_decon1x",
+                      "sclk_decon_vclk",
+                      "sclk_decon_eclk",
+                      "dsd";
+        power-domains = <&pd_disp>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+        samsung,disp-sysreg = <&syscon_disp>;
+        iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
+        iommu-names = "m0", "m1";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                decon_to_mic: endpoint {
+                    remote-endpoint = <&mic_to_decon>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml
new file mode 100644
index 000000000000..26e5017737a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-mic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC Mobile Image Compressor (MIC)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  MIC (Mobile Image Compressor) resides between DECON and MIPI DSI. MIPI DSI is
+  not capable of transferring high resoltuion frame data as DECON can send. MIC
+  solves this problem by compressing the frame data by 1/2 before it is
+  transferred through MIPI DSI. The compressed frame data must be uncompressed
+  in the panel PCB.
+
+properties:
+  compatible:
+    const: samsung,exynos5433-mic
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk_mic0
+      - const: sclk_rgb_vclk_to_mic0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,disp-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ports
+  - reg
+  - samsung,disp-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    image-processor@13930000 {
+        compatible = "samsung,exynos5433-mic";
+        reg = <0x13930000 0x48>;
+        clocks = <&cmu_disp CLK_PCLK_MIC0>,
+                 <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+        clock-names = "pclk_mic0",
+                      "sclk_rgb_vclk_to_mic0";
+        power-domains = <&pd_disp>;
+        samsung,disp-syscon = <&syscon_disp>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                mic_to_decon: endpoint {
+                    remote-endpoint = <&decon_to_mic>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                mic_to_dsi: endpoint {
+                    remote-endpoint = <&dsi_to_mic>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml
new file mode 100644
index 000000000000..992c23ca7a4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos7-decon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC Display and Enhancement Controller (DECON)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  DECON (Display and Enhancement Controller) is the Display Controller for the
+  Exynos7 series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+properties:
+  compatible:
+    const: samsung,exynos7-decon
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: pclk_decon0
+      - const: aclk_decon0
+      - const: decon0_eclk
+      - const: decon0_vclk
+
+  display-timings:
+    $ref: ../panel/display-timings.yaml#
+
+  i80-if-timings:
+    type: object
+    additionalProperties: false
+    description: timing configuration for lcd i80 interface support
+    properties:
+      cs-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of address signal is enabled until
+          chip select is enabled.
+        default: 0
+
+      wr-active:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is enabled.
+        default: 1
+
+      wr-hold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is disabled until write
+          signal is disabled.
+        default: 0
+
+      wr-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS signal is enabled until
+          write signal is enabled.
+        default: 0
+
+  interrupts:
+    items:
+      - description: FIFO level
+      - description: VSYNC
+      - description: LCD system
+
+  interrupt-names:
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display-controller@13930000 {
+        compatible = "samsung,exynos7-decon";
+        reg = <0x13930000 0x1000>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock_disp 100>, /* PCLK_DECON_INT */
+                 <&clock_disp 101>, /* ACLK_DECON_INT */
+                 <&clock_disp 102>, /* SCLK_DECON_INT_ECLK */
+                 <&clock_disp 103>; /* SCLK_DECON_INT_EXTCLKPLL */
+        clock-names = "pclk_decon0",
+                      "aclk_decon0",
+                      "decon0_eclk",
+                      "decon0_vclk";
+        pinctrl-0 = <&lcd_clk &pwm1_out>;
+        pinctrl-names = "default";
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml
new file mode 100644
index 000000000000..075231716b2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,fimd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC Fully Interactive Mobile Display (FIMD)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2443-fimd
+      - samsung,s3c6400-fimd
+      - samsung,s5pv210-fimd
+      - samsung,exynos3250-fimd
+      - samsung,exynos4210-fimd
+      - samsung,exynos5250-fimd
+      - samsung,exynos5420-fimd
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sclk_fimd
+      - const: fimd
+
+  display-timings:
+    $ref: ../panel/display-timings.yaml#
+
+  i80-if-timings:
+    type: object
+    additionalProperties: false
+    description: |
+      Timing configuration for lcd i80 interface support.
+      The parameters are defined as::
+      VCLK(internal)  __|??????|_____|??????|_____|??????|_____|??????|_____|??
+                        :            :            :            :            :
+      Address Output  --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
+                        | cs-setup+1 |            :            :            :
+                        |<---------->|            :            :            :
+      Chip Select     ???????????????|____________:____________:____________|??
+                                     | wr-setup+1 |            | wr-hold+1  |
+                                     |<---------->|            |<---------->|
+      Write Enable    ????????????????????????????|____________|???????????????
+                                                  | wr-active+1|
+                                                  |<---------->|
+      Video Data      ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
+
+    properties:
+      cs-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of address signal is enabled until
+          chip select is enabled.
+        default: 0
+
+      wr-active:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is enabled.
+        default: 1
+
+      wr-hold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is disabled until write
+          signal is disabled.
+        default: 0
+
+      wr-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS signal is enabled until
+          write signal is enabled.
+        default: 0
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  iommu-names:
+    items:
+      - const: m0
+      - const: m1
+
+  interrupts:
+    items:
+      - description: FIFO level
+      - description: VSYNC
+      - description: LCD system
+
+  interrupt-names:
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,invert-vden:
+    type: boolean
+    description:
+      Video enable signal is inverted.
+
+  samsung,invert-vclk:
+    type: boolean
+    description:
+      Video clock signal is inverted.
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to System Register syscon.
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^port@[0-4]+$":
+    $ref: /schemas/graph.yaml#/properties/port
+    description: |
+      Contains ports with port with index::
+       0 - for CAMIF0 input,
+       1 - for CAMIF1 input,
+       2 - for CAMIF2 input,
+       3 - for parallel output,
+       4 - for write-back interface
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5420-fimd
+    then:
+      properties:
+        iommus:
+          minItems: 2
+          maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+
+    fimd@11c00000 {
+        compatible = "samsung,exynos4210-fimd";
+        interrupt-parent = <&combiner>;
+        reg = <0x11c00000 0x20000>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <11 0>, <11 1>, <11 2>;
+        clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
+        clock-names = "sclk_fimd", "fimd";
+        power-domains = <&pd_lcd0>;
+        iommus = <&sysmmu_fimd0>;
+        samsung,sysreg = <&sys_reg>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        samsung,invert-vden;
+        samsung,invert-vclk;
+
+        pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+        pinctrl-names = "default";
+
+        port@3 {
+            reg = <3>;
+
+            fimd_dpi_ep: endpoint {
+                remote-endpoint = <&lcd_ep>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
index 1db608c9eef5..dd64f70b5014 100644
--- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
@@ -4,10 +4,9 @@
 $id: http://devicetree.org/schemas/display/simple-framebuffer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Simple Framebuffer Device Tree Bindings
+title: Simple Framebuffer
 
 maintainers:
-  - Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
   - Hans de Goede <hdegoede@redhat.com>
 
 description: |+
@@ -52,10 +51,13 @@ description: |+
 
 properties:
   compatible:
-    items:
-      - enum:
-          - allwinner,simple-framebuffer
-          - amlogic,simple-framebuffer
+    oneOf:
+      - items:
+          - enum:
+              - apple,simple-framebuffer
+              - allwinner,simple-framebuffer
+              - amlogic,simple-framebuffer
+          - const: simple-framebuffer
       - const: simple-framebuffer
 
   reg:
@@ -82,11 +84,27 @@ properties:
   format:
     description: >
       Format of the framebuffer:
+        * `a1r5g5b5` - 16-bit pixels, d[15]=a, d[14:10]=r, d[9:5]=g, d[4:0]=b
+        * `a2r10g10b10` - 32-bit pixels, d[31:30]=a, d[29:20]=r, d[19:10]=g, d[9:0]=b
         * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r
+        * `a8r8g8b8` - 32-bit pixels, d[31:24]=a, d[23:16]=r, d[15:8]=g, d[7:0]=b
         * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b
+        * `r5g5b5a1` - 16-bit pixels, d[15:11]=r, d[10:6]=g, d[5:1]=b d[1:0]=a
+        * `r8g8b8` - 24-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
+        * `x1r5g5b5` - 16-bit pixels, d[14:10]=r, d[9:5]=g, d[4:0]=b
+        * `x2r10g10b10` - 32-bit pixels, d[29:20]=r, d[19:10]=g, d[9:0]=b
+        * `x8r8g8b8` - 32-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
     enum:
+      - a1r5g5b5
+      - a2r10g10b10
       - a8b8g8r8
+      - a8r8g8b8
       - r5g6b5
+      - r5g5b5a1
+      - r8g8b8
+      - x1r5g5b5
+      - x2r10g10b10
+      - x8r8g8b8
 
   display:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -152,28 +170,28 @@ additionalProperties: false
 
 examples:
   - |
-    aliases {
-      display0 = &lcdc0;
+    / {
+        compatible = "foo";
+        model = "foo";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        chosen {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            framebuffer0: framebuffer@1d385000 {
+                compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+                allwinner,pipeline = "de_be0-lcd0";
+                reg = <0x1d385000 3840000>;
+                width = <1600>;
+                height = <1200>;
+                stride = <3200>;
+                format = "r5g6b5";
+                clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
+                lcd-supply = <&reg_dc1sw>;
+                display = <&lcdc0>;
+            };
+        };
     };
 
-    chosen {
-      #address-cells = <1>;
-      #size-cells = <1>;
-      stdout-path = "display0";
-      framebuffer0: framebuffer@1d385000 {
-        compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
-        allwinner,pipeline = "de_be0-lcd0";
-        reg = <0x1d385000 3840000>;
-        width = <1600>;
-        height = <1200>;
-        stride = <3200>;
-        format = "r5g6b5";
-        clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
-        lcd-supply = <&reg_dc1sw>;
-        display = <&lcdc0>;
-      };
-    };
-
-    lcdc0: lcdc { };
-
 ...
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt
deleted file mode 100644
index cd5c7186890a..000000000000
--- a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Sitronix ST7735R display panels
-
-This binding is for display panels using a Sitronix ST7735R controller in SPI
-mode.
-
-Required properties:
-- compatible:	"jianda,jd-t18003-t01", "sitronix,st7735r"
-- dc-gpios:	Display data/command selection (D/CX)
-- reset-gpios:	Reset signal (RSTX)
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
-- backlight:	phandle of the backlight device attached to the panel
-
-Example:
-
-	backlight: backlight {
-		compatible = "gpio-backlight";
-		gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
-	};
-
-	...
-
-	display@0{
-		compatible = "jianda,jd-t18003-t01", "sitronix,st7735r";
-		reg = <0>;
-		spi-max-frequency = <32000000>;
-		dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
-		rotation = <270>;
-		backlight = &backlight;
-	};
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
new file mode 100644
index 000000000000..621f27148419
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7735R Display Panels
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+description:
+  This binding is for display panels using a Sitronix ST7715R or ST7735R
+  controller in SPI mode.
+
+allOf:
+  - $ref: panel/panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Adafruit 1.8" 160x128 Color TFT LCD (Product ID 358 or 618)
+        items:
+          - enum:
+              - jianda,jd-t18003-t01
+          - const: sitronix,st7735r
+      - description:
+          Okaya 1.44" 128x128 Color TFT LCD (E.g. Renesas YRSK-LCD-PMOD)
+        items:
+          - enum:
+              - okaya,rh128128t
+          - const: sitronix,st7715r
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX)
+
+  backlight: true
+  reg: true
+  spi-max-frequency: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight: backlight {
+            compatible = "gpio-backlight";
+            gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+    };
+
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            display@0{
+                    compatible = "jianda,jd-t18003-t01", "sitronix,st7735r";
+                    reg = <0>;
+                    spi-max-frequency = <32000000>;
+                    dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+                    rotation = <270>;
+                    backlight = <&backlight>;
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
new file mode 100644
index 000000000000..669f70b1b4c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd1307fb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD1307 OLED Controller Framebuffer
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+properties:
+  compatible:
+    oneOf:
+      # Deprecated compatible strings
+      - items:
+          - enum:
+              - solomon,ssd1305fb-i2c
+              - solomon,ssd1306fb-i2c
+              - solomon,ssd1307fb-i2c
+              - solomon,ssd1309fb-i2c
+        deprecated: true
+      - items:
+          - enum:
+              - sinowealth,sh1106
+              - solomon,ssd1305
+              - solomon,ssd1306
+              - solomon,ssd1307
+              - solomon,ssd1309
+
+  reg:
+    maxItems: 1
+
+  pwms:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  # Only required for SPI
+  dc-gpios:
+    description:
+      GPIO connected to the controller's D/C# (Data/Command) pin,
+      that is needed for 4-wire SPI to tell the controller if the
+      data sent is for a command register or the display data RAM
+    maxItems: 1
+
+  vbat-supply:
+    description: The supply for VBAT
+
+  solomon,height:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 16
+    description:
+      Height in pixel of the screen driven by the controller
+
+  solomon,width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 96
+    description:
+      Width in pixel of the screen driven by the controller
+
+  solomon,page-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    description:
+      Offset of pages (band of 8 pixels) that the screen is mapped to
+
+  solomon,segment-no-remap:
+    type: boolean
+    description:
+      Display needs normal (non-inverted) data column to segment mapping
+
+  solomon,col-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Offset of columns (COL/SEG) that the screen is mapped to
+
+  solomon,com-seq:
+    type: boolean
+    description:
+      Display uses sequential COM pin configuration
+
+  solomon,com-lrremap:
+    type: boolean
+    description:
+      Display uses left-right COM pin remap
+
+  solomon,com-invdir:
+    type: boolean
+    description:
+      Display uses inverted COM pin scan direction
+
+  solomon,com-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Number of the COM pin wired to the first display line
+
+  solomon,prechargep1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2
+    description:
+      Length of deselect period (phase 1) in clock cycles
+
+  solomon,prechargep2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2
+    description:
+      Length of precharge period (phase 2) in clock cycles.  This needs to be
+      the higher, the higher the capacitance of the OLED's pixels is.
+
+  solomon,dclk-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 16
+    description:
+      Clock divisor. The default value is controller-dependent.
+
+  solomon,dclk-frq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Clock frequency, higher value means higher frequency.
+      The default value is controller-dependent.
+
+  solomon,lookup-table:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 4
+    description:
+      8 bit value array of current drive pulse widths for BANK0, and colors A,
+      B, and C. Each value in range of 31 to 63 for pulse widths of 32 to 64.
+      Color D is always width 64.
+
+  solomon,area-color-enable:
+    type: boolean
+    description:
+      Display uses color mode
+
+  solomon,low-power:
+    type: boolean
+    description:
+      Display runs in low power mode
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sinowealth,sh1106
+    then:
+      properties:
+        solomon,dclk-div:
+          default: 1
+        solomon,dclk-frq:
+          default: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - solomon,ssd1305-i2c
+              - solomon,ssd1305
+    then:
+      properties:
+        solomon,dclk-div:
+          default: 1
+        solomon,dclk-frq:
+          default: 7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - solomon,ssd1306-i2c
+              - solomon,ssd1306
+    then:
+      properties:
+        solomon,dclk-div:
+          default: 1
+        solomon,dclk-frq:
+          default: 8
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - solomon,ssd1307-i2c
+              - solomon,ssd1307
+    then:
+      properties:
+        solomon,dclk-div:
+          default: 2
+        solomon,dclk-frq:
+          default: 12
+      required:
+        - pwms
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - solomon,ssd1309-i2c
+              - solomon,ssd1309
+    then:
+      properties:
+        solomon,dclk-div:
+          default: 1
+        solomon,dclk-frq:
+          default: 10
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ssd1307_i2c: oled@3c {
+                    compatible = "solomon,ssd1307";
+                    reg = <0x3c>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+            };
+
+            ssd1306_i2c: oled@3d {
+                    compatible = "solomon,ssd1306";
+                    reg = <0x3c>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+                    solomon,com-lrremap;
+                    solomon,com-invdir;
+                    solomon,com-offset = <32>;
+                    solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
+            };
+    };
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ssd1307_spi: oled@0 {
+                    compatible = "solomon,ssd1307";
+                    reg = <0x0>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+                    dc-gpios = <&gpio2 8>;
+                    spi-max-frequency = <10000000>;
+            };
+
+            ssd1306_spi: oled@1 {
+                    compatible = "solomon,ssd1306";
+                    reg = <0x1>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+                    dc-gpios = <&gpio2 8>;
+                    spi-max-frequency = <10000000>;
+                    solomon,com-lrremap;
+                    solomon,com-invdir;
+                    solomon,com-offset = <32>;
+                    solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
new file mode 100644
index 000000000000..b3d5e1b96fae
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,display-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc DRM master device
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+description: |
+  The Unisoc DRM master device is a virtual device needed to list all
+  DPU devices or other display interface nodes that comprise the
+  graphics subsystem.
+
+  Unisoc's display pipeline have several components as below description,
+  multi display controllers and corresponding physical interfaces.
+  For different display scenarios, dpu0 and dpu1 maybe binding to different
+  encoder.
+
+  E.g:
+  dpu0 and dpu1 both binding to DSI for dual mipi-dsi display;
+  dpu0 binding to DSI for primary display, and dpu1 binding to DP for external display;
+
+          +-----------------------------------------+
+          |                                         |
+          |                            +---------+  |
+  +----+  |   +----+    +---------+    |DPHY/CPHY|  |   +------+
+  |    +----->+dpu0+--->+MIPI|DSI +--->+Combo    +----->+Panel0|
+  |AXI |  |   +----+    +---------+    +---------+  |   +------+
+  |    |  |                  ^                      |
+  |    |  |                  |                      |
+  |    |  |      +-----------+                      |
+  |    |  |      |                                  |
+  |APB |  |   +--+-+    +-----------+    +---+      |   +------+
+  |    +----->+dpu1+--->+DisplayPort+--->+PHY+--------->+Panel1|
+  |    |  |   +----+    +-----------+    +---+      |   +------+
+  +----+  |                                         |
+          +-----------------------------------------+
+
+properties:
+  compatible:
+    const: sprd,display-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      Should contain a list of phandles pointing to display interface port
+      of DPU devices.
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "sprd,display-subsystem";
+        ports = <&dpu_out>;
+    };
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
new file mode 100644
index 000000000000..4ebea60b8c5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc Sharkl3 Display Processor Unit (DPU)
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+description: |
+  DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
+  which transfers the image data from a video memory buffer to an internal
+  LCD interface.
+
+properties:
+  compatible:
+    const: sprd,sharkl3-dpu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: clk_src_128m
+      - const: clk_src_384m
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  port:
+    type: object
+    description:
+      A port node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+      That port should be the output endpoint, usually output to
+      the associated DSI.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    dpu: dpu@63000000 {
+        compatible = "sprd,sharkl3-dpu";
+        reg = <0x63000000 0x1000>;
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "clk_src_128m", "clk_src_384m";
+
+        clocks = <&pll CLK_TWPLL_128M>,
+          <&pll CLK_TWPLL_384M>;
+
+        dpu_port: port {
+            dpu_out: endpoint {
+                remote-endpoint = <&dsi_in>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
new file mode 100644
index 000000000000..bc5594d18643
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dsi-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc MIPI DSI Controller
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+properties:
+  compatible:
+    const: sprd,sharkl3-dsi-host
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: clk_src_96m
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    type: object
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description:
+          A port node with endpoint definitions as defined in
+          Documentation/devicetree/bindings/media/video-interfaces.txt.
+          That port should be the input endpoint, usually coming from
+          the associated DPU.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    dsi: dsi@63100000 {
+        compatible = "sprd,sharkl3-dsi-host";
+        reg = <0x63100000 0x1000>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "clk_src_96m";
+        clocks = <&pll CLK_TWPLL_96M>;
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                dsi_in: endpoint {
+                    remote-endpoint = <&dpu_out>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt
deleted file mode 100644
index 27333b9551b3..000000000000
--- a/Documentation/devicetree/bindings/display/ssd1307fb.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* Solomon SSD1307 Framebuffer Driver
-
-Required properties:
-  - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for
-    now is i2c, and the supported chips are ssd1305, ssd1306, ssd1307 and
-    ssd1309.
-  - reg: Should contain address of the controller on the I2C bus. Most likely
-         0x3c or 0x3d
-  - pwm: Should contain the pwm to use according to the OF device tree PWM
-         specification [0]. Only required for the ssd1307.
-  - solomon,height: Height in pixel of the screen driven by the controller
-  - solomon,width: Width in pixel of the screen driven by the controller
-  - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is
-    mapped to.
-
-Optional properties:
-  - reset-gpios: The GPIO used to reset the OLED display, if available. See
-                 Documentation/devicetree/bindings/gpio/gpio.txt for details.
-  - vbat-supply: The supply for VBAT
-  - solomon,segment-no-remap: Display needs normal (non-inverted) data column
-                              to segment mapping
-  - solomon,com-seq: Display uses sequential COM pin configuration
-  - solomon,com-lrremap: Display uses left-right COM pin remap
-  - solomon,com-invdir: Display uses inverted COM pin scan direction
-  - solomon,com-offset: Number of the COM pin wired to the first display line
-  - solomon,prechargep1: Length of deselect period (phase 1) in clock cycles.
-  - solomon,prechargep2: Length of precharge period (phase 2) in clock cycles.
-                         This needs to be the higher, the higher the capacitance
-                         of the OLED's pixels is
-  - solomon,dclk-div: Clock divisor 1 to 16
-  - solomon,dclk-frq: Clock frequency 0 to 15, higher value means higher
-                      frequency
-  - solomon,lookup-table: 8 bit value array of current drive pulse widths for
-                          BANK0, and colors A, B, and C. Each value in range
-                          of 31 to 63 for pulse widths of 32 to 64. Color D
-                          is always width 64.
-  - solomon,area-color-enable: Display uses color mode
-  - solomon,low-power. Display runs in low power mode
-
-[0]: Documentation/devicetree/bindings/pwm/pwm.txt
-
-Examples:
-ssd1307: oled@3c {
-        compatible = "solomon,ssd1307fb-i2c";
-        reg = <0x3c>;
-        pwms = <&pwm 4 3000>;
-        reset-gpios = <&gpio2 7>;
-};
-
-ssd1306: oled@3c {
-        compatible = "solomon,ssd1306fb-i2c";
-        reg = <0x3c>;
-        pwms = <&pwm 4 3000>;
-        reset-gpios = <&gpio2 7>;
-        solomon,com-lrremap;
-        solomon,com-invdir;
-        solomon,com-offset = <32>;
-        solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
-};
diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
index 3be76d15bf6c..c488308d7be1 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
@@ -7,12 +7,15 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 DSI host controller
 
 maintainers:
-  - Philippe Cornu <philippe.cornu@st.com>
-  - Yannick Fertre <yannick.fertre@st.com>
+  - Philippe Cornu <philippe.cornu@foss.st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
 
 description:
   The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller.
 
+allOf:
+  - $ref: dsi-controller.yaml#
+
 properties:
   compatible:
     const: st,stm32-dsi
@@ -26,7 +29,6 @@ properties:
       - description: DSI bus clock
       - description: Pixel clock
     minItems: 2
-    maxItems: 3
 
   clock-names:
     items:
@@ -34,7 +36,6 @@ properties:
       - const: ref
       - const: px_clk
     minItems: 2
-    maxItems: 3
 
   resets:
     maxItems: 1
@@ -45,43 +46,32 @@ properties:
 
   phy-dsi-supply:
     description:
-        Phandle of the regulator that provides the supply voltage.
+      Phandle of the regulator that provides the supply voltage.
 
   ports:
-    type: object
-    description:
-      A node containing DSI input & output port nodes with endpoint
-      definitions as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
-      Documentation/devicetree/bindings/graph.txt
+    $ref: /schemas/graph.yaml#/properties/ports
+
     properties:
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           DSI input port node, connected to the ltdc rgb output port.
 
       port@1:
-        type: object
-        description:
-          DSI output port node, connected to a panel or a bridge input port"
-
-patternProperties:
-  "^(panel|panel-dsi)@[0-9]$":
-    type: object
-    description:
-      A node containing the panel or bridge description as documented in
-      Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
-    properties:
-      port:
-        type: object
-        description:
-          Panel or bridge port node, connected to the DSI output port (port@1)
-
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+          DSI output port node, connected to a panel or a bridge input port.
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
 
 required:
   - "#address-cells"
@@ -92,7 +82,7 @@ required:
   - clock-names
   - ports
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -131,7 +121,7 @@ examples:
               };
         };
 
-        panel-dsi@0 {
+        panel@0 {
               compatible = "orisetech,otm8009a";
               reg = <0>;
               reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
@@ -146,5 +136,3 @@ examples:
     };
 
 ...
-
-
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
index bf8ad916e9b0..d6ea4d62a2cf 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 lcd-tft display controller
 
 maintainers:
-  - Philippe Cornu <philippe.cornu@st.com>
-  - Yannick Fertre <yannick.fertre@st.com>
+  - Philippe Cornu <philippe.cornu@foss.st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
 
 properties:
   compatible:
@@ -22,7 +22,6 @@ properties:
       - description: events interrupt line.
       - description: errors interrupt line.
     minItems: 1
-    maxItems: 2
 
   clocks:
     maxItems: 1
@@ -35,15 +34,13 @@ properties:
     maxItems: 1
 
   port:
-    type: object
-    description:
-      "Video port for DPI RGB output.
+    $ref: /schemas/graph.yaml#/properties/port
+    description: |
+      Video port for DPI RGB output.
       ltdc has one video port with up to 2 endpoints:
       - for external dpi rgb panel or bridge, using gpios.
       - for internal dpi input of the MIPI DSI host controller.
       Note: These 2 endpoints cannot be activated simultaneously.
-      Please refer to the bindings defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt."
 
 required:
   - compatible
@@ -78,4 +75,3 @@ examples:
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/display/ste,mcde.txt b/Documentation/devicetree/bindings/display/ste,mcde.txt
deleted file mode 100644
index 4c33c692bd5f..000000000000
--- a/Documentation/devicetree/bindings/display/ste,mcde.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-ST-Ericsson Multi Channel Display Engine MCDE
-
-The ST-Ericsson MCDE is a display controller with support for compositing
-and displaying several channels memory resident graphics data on DSI or
-LCD displays or bridges. It is used in the ST-Ericsson U8500 platform.
-
-Required properties:
-
-- compatible: must be:
-  "ste,mcde"
-- reg: register base for the main MCDE control registers, should be
-  0x1000 in size
-- interrupts: the interrupt line for the MCDE
-- epod-supply: a phandle to the EPOD regulator
-- vana-supply: a phandle to the analog voltage regulator
-- clocks: an array of the MCDE clocks in this strict order:
-  MCDECLK (main MCDE clock), LCDCLK (LCD clock), PLLDSI
-  (HDMI clock), DSI0ESCLK (DSI0 energy save clock),
-  DSI1ESCLK (DSI1 energy save clock), DSI2ESCLK (DSI2 energy
-  save clock)
-- clock-names: must be the following array:
-  "mcde", "lcd", "hdmi"
-  to match the required clock inputs above.
-- #address-cells: should be <1> (for the DSI hosts that will be children)
-- #size-cells: should be <1> (for the DSI hosts that will be children)
-- ranges: this should always be stated
-
-Required subnodes:
-
-The devicetree must specify subnodes for the DSI host adapters.
-These must have the following characteristics:
-
-- compatible: must be:
-  "ste,mcde-dsi"
-- reg: must specify the register range for the DSI host
-- vana-supply: phandle to the VANA voltage regulator
-- clocks: phandles to the high speed and low power (energy save) clocks
-  the high speed clock is not present on the third (dsi2) block, so it
-  should only have the "lp" clock
-- clock-names: "hs" for the high speed clock and "lp" for the low power
-  (energy save) clock
-- #address-cells: should be <1>
-- #size-cells: should be <0>
-
-Display panels and bridges will appear as children on the DSI hosts, and
-the displays are connected to the DSI hosts using the common binding
-for video transmitter interfaces; see
-Documentation/devicetree/bindings/media/video-interfaces.txt
-
-If a DSI host is unused (not connected) it will have no children defined.
-
-Example:
-
-mcde@a0350000 {
-	compatible = "ste,mcde";
-	reg = <0xa0350000 0x1000>;
-	interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-	epod-supply = <&db8500_b2r2_mcde_reg>;
-	vana-supply = <&ab8500_ldo_ana_reg>;
-	clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
-		 <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
-		 <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */
-	clock-names = "mcde", "lcd", "hdmi";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	dsi0: dsi@a0351000 {
-		compatible = "ste,mcde-dsi";
-		reg = <0xa0351000 0x1000>;
-		vana-supply = <&ab8500_ldo_ana_reg>;
-		clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
-		clock-names = "hs", "lp";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		panel {
-			compatible = "samsung,s6d16d0";
-			reg = <0>;
-			vdd1-supply = <&ab8500_ldo_aux1_reg>;
-			reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		};
-
-	};
-	dsi1: dsi@a0352000 {
-		compatible = "ste,mcde-dsi";
-		reg = <0xa0352000 0x1000>;
-		vana-supply = <&ab8500_ldo_ana_reg>;
-		clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
-		clock-names = "hs", "lp";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-	dsi2: dsi@a0353000 {
-		compatible = "ste,mcde-dsi";
-		reg = <0xa0353000 0x1000>;
-		vana-supply = <&ab8500_ldo_ana_reg>;
-		/* This DSI port only has the Low Power / Energy Save clock */
-		clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
-		clock-names = "lp";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml
new file mode 100644
index 000000000000..564ea845c82e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ste,mcde.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson Multi Channel Display Engine MCDE
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: ste,mcde
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: an array of the MCDE clocks
+    items:
+      - description: MCDECLK (main MCDE clock)
+      - description: LCDCLK (LCD clock)
+      - description: PLLDSI (HDMI clock)
+
+  clock-names:
+    items:
+      - const: mcde
+      - const: lcd
+      - const: hdmi
+
+  resets:
+    maxItems: 1
+
+  epod-supply:
+    description: a phandle to the EPOD regulator
+
+  vana-supply:
+    description: a phandle to the analog voltage regulator
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A DPI port node
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^dsi@[0-9a-f]+$":
+    description: subnodes for the three DSI host adapters
+    type: object
+    $ref: dsi-controller.yaml#
+
+    properties:
+      compatible:
+        const: ste,mcde-dsi
+
+      reg:
+        maxItems: 1
+
+      vana-supply:
+        description: a phandle to the analog voltage regulator
+
+      clocks:
+        description: phandles to the high speed and low power (energy save) clocks
+          the high speed clock is not present on the third (dsi2) block, so it
+          should only have the "lp" clock
+        minItems: 1
+        maxItems: 2
+
+      clock-names:
+        oneOf:
+          - items:
+              - const: hs
+              - const: lp
+          - items:
+              - const: lp
+
+    required:
+      - compatible
+      - reg
+      - vana-supply
+      - clocks
+      - clock-names
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - epod-supply
+  - vana-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mfd/dbx500-prcmu.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    mcde@a0350000 {
+      compatible = "ste,mcde";
+      reg = <0xa0350000 0x1000>;
+      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+      epod-supply = <&db8500_b2r2_mcde_reg>;
+      vana-supply = <&ab8500_ldo_ana_reg>;
+      clocks = <&prcmu_clk PRCMU_MCDECLK>,
+               <&prcmu_clk PRCMU_LCDCLK>,
+               <&prcmu_clk PRCMU_PLLDSI>;
+      clock-names = "mcde", "lcd", "hdmi";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      dsi0: dsi@a0351000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0351000 0x1000>;
+        vana-supply = <&ab8500_ldo_ana_reg>;
+        clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
+        clock-names = "hs", "lp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+          compatible = "samsung,s6d16d0";
+          reg = <0>;
+          vdd1-supply = <&ab8500_ldo_aux1_reg>;
+          reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+        };
+      };
+
+      dsi1: dsi@a0352000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0352000 0x1000>;
+        vana-supply = <&ab8500_ldo_ana_reg>;
+        clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
+        clock-names = "hs", "lp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+
+      dsi2: dsi@a0353000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0353000 0x1000>;
+        vana-supply = <&ab8500_ldo_ana_reg>;
+        /* This DSI port only has the Low Power / Energy Save clock */
+        clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
+        clock-names = "lp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt
deleted file mode 100644
index e4a25cedc5cf..000000000000
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-NVIDIA Tegra MIPI pad calibration controller
-
-Required properties:
-- compatible: "nvidia,tegra<chip>-mipi"
-- reg: Physical base address and length of the controller's registers.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - mipi-cal
-- #nvidia,mipi-calibrate-cells: Should be 1. The cell is a bitmask of the pads
-  that need to be calibrated for a given device.
-
-User nodes need to contain an nvidia,mipi-calibrate property that has a
-phandle to refer to the calibration controller node and a bitmask of the pads
-that need to be calibrated.
-
-Example:
-
-	mipi: mipi@700e3000 {
-		compatible = "nvidia,tegra114-mipi";
-		reg = <0x700e3000 0x100>;
-		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
-		clock-names = "mipi-cal";
-		#nvidia,mipi-calibrate-cells = <1>;
-	};
-
-	...
-
-	host1x@50000000 {
-		...
-
-		dsi@54300000 {
-			...
-
-			nvidia,mipi-calibrate = <&mipi 0x060>;
-
-			...
-		};
-
-		...
-	};
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
new file mode 100644
index 000000000000..d5ca8cf86e8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra114-mipi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI pad calibration controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^mipi@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra114-mipi
+      - nvidia,tegra210-mipi
+      - nvidia,tegra186-mipi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: mipi-cal
+
+  power-domains:
+    maxItems: 1
+
+  "#nvidia,mipi-calibrate-cells":
+    description: The number of cells in a MIPI calibration specifier.
+      Should be 1. The single cell specifies a bitmask of the pads that
+      need to be calibrated for a given device.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#nvidia,mipi-calibrate-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra114-car.h>
+
+    mipi@700e3000 {
+        compatible = "nvidia,tegra114-mipi";
+        reg = <0x700e3000 0x100>;
+        clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+        clock-names = "mipi-cal";
+        #nvidia,mipi-calibrate-cells = <1>;
+    };
+
+    dsia: dsi@54300000 {
+        compatible = "nvidia,tegra114-dsi";
+        reg = <0x54300000 0x00040000>;
+        clocks = <&tegra_car TEGRA114_CLK_DSIA>,
+                 <&tegra_car TEGRA114_CLK_DSIALP>,
+                 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
+        clock-names = "dsi", "lp", "parent";
+        resets = <&tegra_car 48>;
+        reset-names = "dsi";
+        nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
new file mode 100644
index 000000000000..9ab123cd2325
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-dpaux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra DisplayPort AUX Interface
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Tegra Display Port Auxiliary (DPAUX) pad controller manages two
+  pins which can be assigned to either the DPAUX channel or to an I2C
+  controller.
+
+  When configured for DisplayPort AUX operation, the DPAUX controller
+  can also be used to communicate with a DisplayPort device using the
+  AUX channel.
+
+properties:
+  $nodename:
+    pattern: "^dpaux@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-dpaux
+          - nvidia,tegra210-dpaux
+          - nvidia,tegra186-dpaux
+          - nvidia,tegra194-dpaux
+
+      - items:
+          - const: nvidia,tegra132-dpaux
+          - const: nvidia,tegra124-dpaux
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock input for the DPAUX hardware
+      - description: reference clock
+
+  clock-names:
+    items:
+      - const: dpaux
+      - const: parent
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dpaux
+
+  power-domains:
+    maxItems: 1
+
+  i2c-bus:
+    description: Subnode where I2C slave devices are listed. This
+      subnode must be always present. If there are no I2C slave
+      devices, an empty node should be added. See ../../i2c/i2c.yaml
+      for more information.
+    type: object
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  vdd-supply:
+    description: phandle of a supply that powers the DisplayPort
+      link
+
+patternProperties:
+  "^pinmux-[a-z0-9]+$":
+    description:
+      Since only three configurations are possible, only three child
+      nodes are needed to describe the pin mux'ing options for the
+      DPAUX pads. Furthermore, given that the pad functions are only
+      applicable to a single set of pads, the child nodes only need
+      to describe the pad group the functions are being applied to
+      rather than the individual pads.
+    type: object
+    properties:
+      groups:
+        const: dpaux-io
+
+      function:
+        enum:
+          - aux
+          - i2c
+          - off
+
+    additionalProperties: false
+
+    required:
+      - groups
+      - function
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dpaux: dpaux@545c0000 {
+        compatible = "nvidia,tegra210-dpaux";
+        reg = <0x545c0000 0x00040000>;
+        interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
+                 <&tegra_car TEGRA210_CLK_PLL_DP>;
+        clock-names = "dpaux", "parent";
+        resets = <&tegra_car 181>;
+        reset-names = "dpaux";
+        power-domains = <&pd_sor>;
+        status = "disabled";
+
+        state_dpaux_aux: pinmux-aux {
+            groups = "dpaux-io";
+            function = "aux";
+        };
+
+        state_dpaux_i2c: pinmux-i2c {
+            groups = "dpaux-io";
+            function = "i2c";
+        };
+
+        state_dpaux_off: pinmux-off {
+            groups = "dpaux-io";
+            function = "off";
+        };
+
+        i2c-bus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
new file mode 100644
index 000000000000..907fb0baccae
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-sor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra SOR Output Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Serial Output Resource (SOR) can be used to drive HDMI, LVDS, eDP
+  and DP outputs.
+
+properties:
+  $nodename:
+    pattern: "^sor@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-sor
+          - nvidia,tegra210-sor
+          - nvidia,tegra210-sor1
+          - nvidia,tegra186-sor
+          - nvidia,tegra186-sor1
+          - nvidia,tegra194-sor
+
+      - items:
+          - const: nvidia,tegra132-sor
+          - const: nvidia,tegra124-sor
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 5
+    maxItems: 6
+
+  clock-names:
+    minItems: 5
+    maxItems: 6
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: sor
+
+  power-domains:
+    maxItems: 1
+
+  avdd-io-hdmi-dp-supply:
+    description: I/O supply for HDMI/DP
+
+  vdd-hdmi-dp-pll-supply:
+    description: PLL supply for HDMI/DP
+
+  hdmi-supply:
+    description: +5.0V HDMI connector supply, required for HDMI
+
+  # Tegra186 and later
+  nvidia,interface:
+    description: index of the SOR interface
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: "/schemas/types.yaml#/definitions/uint8-array"
+
+  nvidia,panel:
+    description: phandle of a display panel, required for eDP
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,xbar-cfg:
+    description: 5 cells containing the crossbar configuration.
+      Each lane of the SOR, identified by the cell's index, is
+      mapped via the crossbar to the pad specified by the cell's
+      value.
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+
+  # optional when driving an eDP output
+  nvidia,dpaux:
+    description: phandle to a DispayPort AUX interface
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-sor
+              - nvidia,tegra194-sor
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock input for the SOR hardware
+            - description: SOR output clock
+            - description: input for the pixel clock
+            - description: reference clock for the SOR clock
+            - description: safe reference clock for the SOR clock
+                during power up
+            - description: SOR pad output clock
+
+        clock-names:
+          items:
+            - const: sor
+            - enum:
+                - source # deprecated
+                - out
+            - const: parent
+            - const: dp
+            - const: safe
+            - const: pad
+    else:
+      properties:
+        clocks:
+          items:
+            - description: clock input for the SOR hardware
+            - description: SOR output clock
+            - description: input for the pixel clock
+            - description: reference clock for the SOR clock
+            - description: safe reference clock for the SOR clock
+                during power up
+
+        clock-names:
+          items:
+            - const: sor
+            - enum:
+                - source # deprecated
+                - out
+            - const: parent
+            - const: dp
+            - const: safe
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - avdd-io-hdmi-dp-supply
+  - vdd-hdmi-dp-pll-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sor0: sor@54540000 {
+        compatible = "nvidia,tegra210-sor";
+        reg = <0x54540000 0x00040000>;
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+                 <&tegra_car TEGRA210_CLK_SOR0_OUT>,
+                 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
+                 <&tegra_car TEGRA210_CLK_PLL_DP>,
+                 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+        clock-names = "sor", "out", "parent", "dp", "safe";
+        resets = <&tegra_car 182>;
+        reset-names = "sor";
+        pinctrl-0 = <&state_dpaux_aux>;
+        pinctrl-1 = <&state_dpaux_i2c>;
+        pinctrl-2 = <&state_dpaux_off>;
+        pinctrl-names = "aux", "i2c", "off";
+        power-domains = <&pd_sor>;
+
+        avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+        vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
+        hdmi-supply = <&vdd_hdmi>;
+
+        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1) GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml
new file mode 100644
index 000000000000..7200095ef19e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-vic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Image Composer
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^vic@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-vic
+          - nvidia,tegra210-vic
+          - nvidia,tegra186-vic
+          - nvidia,tegra194-vic
+          - nvidia,tegra234-vic
+
+      - items:
+          - const: nvidia,tegra132-vic
+          - const: nvidia,tegra124-vic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock input for the VIC hardware
+
+  clock-names:
+    items:
+      - const: vic
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: vic
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    description: Description of the interconnect paths for the VIC;
+      see ../interconnect/interconnect.txt for details.
+    items:
+      - description: memory read client for VIC
+      - description: memory write client for VIC
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
new file mode 100644
index 000000000000..265a60d79d89
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^display@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-dc
+      - nvidia,tegra194-dc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: display controller pixel clock
+
+  clock-names:
+    items:
+      - const: dc
+
+  resets:
+    items:
+      - description: display controller reset
+
+  reset-names:
+    items:
+      - const: dc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    description: Description of the interconnect paths for the
+      display controller; see ../interconnect/interconnect.txt
+      for details.
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read-0
+      - const: read-1
+
+  nvidia,outputs:
+    description: A list of phandles of outputs that this display
+      controller can drive.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+
+  nvidia,head:
+    description: The number of the display controller head. This
+      is used to setup the various types of output to receive
+      video data from the given head.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - nvidia,outputs
+  - nvidia,head
+
+# see nvidia,tegra186-display.yaml for examples
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
new file mode 100644
index 000000000000..8c0231345529
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
@@ -0,0 +1,310 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Hub
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^display-hub@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-display
+      - nvidia,tegra194-display
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    items:
+      - description: display hub reset
+      - description: window group 0 reset
+      - description: window group 1 reset
+      - description: window group 2 reset
+      - description: window group 3 reset
+      - description: window group 4 reset
+      - description: window group 5 reset
+
+  reset-names:
+    items:
+      - const: misc
+      - const: wgrp0
+      - const: wgrp1
+      - const: wgrp2
+      - const: wgrp3
+      - const: wgrp4
+      - const: wgrp5
+
+  power-domains:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+
+patternProperties:
+  "^display@[0-9a-f]+$":
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-display
+    then:
+      properties:
+        clocks:
+          items:
+            - description: display core clock
+            - description: display stream compression clock
+            - description: display hub clock
+
+        clock-names:
+          items:
+            - const: disp
+            - const: dsc
+            - const: hub
+    else:
+      properties:
+        clocks:
+          items:
+            - description: display core clock
+            - description: display hub clock
+
+        clock-names:
+          items:
+            - const: disp
+            - const: hub
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    display-hub@15200000 {
+        compatible = "nvidia,tegra186-display";
+        reg = <0x15200000 0x00040000>;
+        resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP2>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP3>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP4>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP5>;
+        reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+                      "wgrp3", "wgrp4", "wgrp5";
+        clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_DISP>,
+                 <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>,
+                 <&bpmp TEGRA186_CLK_NVDISPLAYHUB>;
+        clock-names = "disp", "dsc", "hub";
+        status = "disabled";
+
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x15200000 0x15200000 0x40000>;
+
+        display@15200000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15200000 0x10000>;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD0>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+            nvidia,head = <0>;
+        };
+
+        display@15210000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15210000 0x10000>;
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD1>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+            nvidia,head = <1>;
+        };
+
+        display@15220000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15220000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD2>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&sor0 &sor1>;
+            nvidia,head = <2>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra194-mc.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    display-hub@15200000 {
+        compatible = "nvidia,tegra194-display";
+        reg = <0x15200000 0x00040000>;
+        resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP1>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP2>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP3>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP4>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP5>;
+        reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+                      "wgrp3", "wgrp4", "wgrp5";
+        clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
+                 <&bpmp TEGRA194_CLK_NVDISPLAYHUB>;
+        clock-names = "disp", "hub";
+        status = "disabled";
+
+        power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x15200000 0x15200000 0x40000>;
+
+        display@15200000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15200000 0x10000>;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P0>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD0>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <0>;
+        };
+
+        display@15210000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15210000 0x10000>;
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P1>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD1>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <1>;
+        };
+
+        display@15220000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15220000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P2>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD2>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <2>;
+        };
+
+        display@15230000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15230000 0x10000>;
+            interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P3>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD3>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
new file mode 100644
index 000000000000..e5a6145c8c53
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dsi-padctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI DSI pad controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^padctl@[0-9a-f]+$"
+
+  compatible:
+    const: nvidia,tegra186-dsi-padctl
+
+  reg:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dsi
+
+allOf:
+  - $ref: "/schemas/reset/reset.yaml"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    padctl@15880000 {
+        compatible = "nvidia,tegra186-dsi-padctl";
+        reg = <0x15880000 0x10000>;
+        resets = <&bpmp TEGRA186_RESET_DSI>;
+        reset-names = "dsi";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml
new file mode 100644
index 000000000000..6eedee503aa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^dc@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-dc
+          - nvidia,tegra30-dc
+          - nvidia,tegra114-dc
+          - nvidia,tegra124-dc
+          - nvidia,tegra210-dc
+
+      - items:
+          - const: nvidia,tegra124-dc
+          - const: nvidia,tegra132-dc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: display controller pixel clock
+      - description: parent clock # optional
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: dc
+      - const: parent # optional
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dc
+
+  interconnect-names: true
+  interconnects: true
+
+  iommus:
+    maxItems: 1
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  memory-region: true
+
+  nvidia,head:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of the display controller head. This is used to setup the various
+      types of output to receive video data from the given head.
+
+  nvidia,outputs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A list of phandles of outputs that this display controller can drive.
+
+  rgb:
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-dc
+              - nvidia,tegra30-dc
+              - nvidia,tegra114-dc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: window A memory client
+            - description: window B memory client
+            - description: window B memory client (vertical filter)
+            - description: window C memory client
+            - description: cursor memory client
+
+        interconnect-names:
+          items:
+            - const: wina
+            - const: winb
+            - const: winb-vfilter
+            - const: winc
+            - const: cursor
+
+        rgb:
+          description: Each display controller node has a child node, named "rgb", that represents
+            the RGB output associated with the controller.
+          type: object
+          properties:
+            nvidia,ddc-i2c-bus:
+              $ref: /schemas/types.yaml#/definitions/phandle
+              description: phandle of an I2C controller used for DDC EDID probing
+
+            nvidia,hpd-gpio:
+              description: specifies a GPIO used for hotplug detection
+              maxItems: 1
+
+            nvidia,edid:
+              $ref: /schemas/types.yaml#/definitions/uint8-array
+              description: supplies a binary EDID blob
+
+            nvidia,panel:
+              $ref: /schemas/types.yaml#/definitions/phandle
+              description: phandle of a display panel
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra124-dc
+    then:
+      properties:
+        interconnects:
+          minItems: 4
+          items:
+            - description: window A memory client
+            - description: window B memory client
+            - description: window C memory client
+            - description: cursor memory client
+            - description: window D memory client
+            - description: window T memory client
+
+        interconnect-names:
+          minItems: 4
+          items:
+            - const: wina
+            - const: winb
+            - const: winc
+            - const: cursor
+            - const: wind
+            - const: wint
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dc@54200000 {
+        compatible = "nvidia,tegra20-dc";
+        reg = <0x54200000 0x00040000>;
+        interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+        clock-names = "dc";
+        resets = <&tegra_car 27>;
+        reset-names = "dc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
new file mode 100644
index 000000000000..75546f250ad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Serial Interface
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-dsi
+          - nvidia,tegra30-dsi
+          - nvidia,tegra114-dsi
+          - nvidia,tegra124-dsi
+          - nvidia,tegra210-dsi
+          - nvidia,tegra186-dsi
+
+      - items:
+          - const: nvidia,tegra132-dsi
+          - const: nvidia,tegra124-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dsi
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    maxItems: 1
+
+  avdd-dsi-csi-supply:
+    description: phandle of a supply that powers the DSI controller
+
+  nvidia,mipi-calibrate:
+    description: Should contain a phandle and a specifier specifying
+      which pads are used by this DSI output and need to be
+      calibrated. See nvidia,tegra114-mipi.yaml for details.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: "/schemas/types.yaml#/definitions/uint8-array"
+
+  nvidia,panel:
+    description: phandle of a display panel
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,ganged-mode:
+    description: contains a phandle to a second DSI controller to
+      gang up with in order to support up to 8 data lanes
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+allOf:
+  - $ref: "../dsi-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-dsi
+              - nvidia,tegra30-dsi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: DSI module clock
+            - description: input for the pixel clock
+
+        clock-names:
+          items:
+            - const: dsi
+            - const: parent
+    else:
+      properties:
+        clocks:
+          items:
+            - description: DSI module clock
+            - description: low-power module clock
+            - description: input for the pixel clock
+
+        clock-names:
+          items:
+            - const: dsi
+            - const: lp
+            - const: parent
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-dsi
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    dsi@15300000 {
+        compatible = "nvidia,tegra186-dsi";
+        reg = <0x15300000 0x10000>;
+        interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_DSI>,
+                 <&bpmp TEGRA186_CLK_DSIA_LP>,
+                 <&bpmp TEGRA186_CLK_PLLD>;
+        clock-names = "dsi", "lp", "parent";
+        resets = <&bpmp TEGRA186_RESET_DSI>;
+        reset-names = "dsi";
+
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml
new file mode 100644
index 000000000000..0d55e6206b5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-epp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Encoder Pre-Processor
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^epp@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-epp
+      - nvidia,tegra30-epp
+      - nvidia,tegra114-epp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: epp
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    maxItems: 4
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    epp@540c0000 {
+        compatible = "nvidia,tegra20-epp";
+        reg = <0x540c0000 0x00040000>;
+        interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_EPP>;
+        resets = <&tegra_car 19>;
+        reset-names = "epp";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml
new file mode 100644
index 000000000000..bf38accd98eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 2D graphics engine
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^gr2d@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-gr2d
+      - nvidia,tegra30-gr2d
+      - nvidia,tegra114-gr2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+      - description: memory client hotflush reset
+
+  reset-names:
+    items:
+      - const: 2d
+      - const: mc
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    maxItems: 4
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the HEG or core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    gr2d@54140000 {
+        compatible = "nvidia,tegra20-gr2d";
+        reg = <0x54140000 0x00040000>;
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+        resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+        reset-names = "2d", "mc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml
new file mode 100644
index 000000000000..4755a73473c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 3D graphics engine
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^gr3d@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-gr3d
+      - nvidia,tegra30-gr3d
+      - nvidia,tegra114-gr3d
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    minItems: 2
+    maxItems: 4
+
+  reset-names:
+    minItems: 2
+    maxItems: 4
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  interconnects:
+    minItems: 4
+    maxItems: 10
+
+  interconnect-names:
+    minItems: 4
+    maxItems: 10
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    minItems: 1
+    maxItems: 2
+
+  power-domain-names:
+    maxItems: 2
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra20-gr2d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+
+        clock-names:
+          items:
+            - const: 3d
+
+        resets:
+          items:
+            - description: module reset
+            - description: memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: mc
+
+        iommus:
+          maxItems: 1
+
+        interconnects:
+          minItems: 4
+          maxItems: 4
+
+        interconnect-names:
+          minItems: 4
+          maxItems: 4
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra30-gr3d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary module clock
+            - description: secondary module clock
+
+        clock-names:
+          items:
+            - const: 3d
+            - const: 3d2
+
+        resets:
+          items:
+            - description: primary module reset
+            - description: secondary module reset
+            - description: primary memory client hotflush reset
+            - description: secondary memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: 3d2
+            - const: mc
+            - const: mc2
+
+        iommus:
+          minItems: 2
+          maxItems: 2
+
+        interconnects:
+          minItems: 8
+          maxItems: 8
+
+        interconnect-names:
+          minItems: 8
+          maxItems: 8
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+            - description: phandle to the TD2 power domain
+
+        power-domain-names:
+          items:
+            - const: 3d0
+            - const: 3d1
+
+      dependencies:
+        power-domains: [ power-domain-names ]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra114-gr2d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+
+        clock-names:
+          items:
+            - const: 3d
+
+        resets:
+          items:
+            - description: module reset
+            - description: memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: mc
+
+        iommus:
+          maxItems: 1
+
+        interconnects:
+          minItems: 10
+          maxItems: 10
+
+        interconnect-names:
+          minItems: 10
+          maxItems: 10
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    gr3d@54180000 {
+        compatible = "nvidia,tegra20-gr3d";
+        reg = <0x54180000 0x00040000>;
+        clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+        resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+        reset-names = "3d", "mc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
new file mode 100644
index 000000000000..035b9f1f2eb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra HDMI Output Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^hdmi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-hdmi
+          - nvidia,tegra30-hdmi
+          - nvidia,tegra114-hdmi
+          - nvidia,tegra124-hdmi
+
+      - items:
+          - const: nvidia,tegra132-hdmi
+          - const: nvidia,tegra124-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+      - description: parent clock
+
+  clock-names:
+    items:
+      - const: hdmi
+      - const: parent
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: hdmi
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  hdmi-supply:
+    description: supply for the +5V HDMI connector pin
+
+  vdd-supply:
+    description: regulator for supply voltage
+
+  pll-supply:
+    description: regulator for PLL
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: "/schemas/types.yaml#/definitions/uint8-array"
+
+  nvidia,panel:
+    description: phandle of a display panel
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  "#sound-dai-cells":
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - pll-supply
+  - vdd-supply
+  - nvidia,ddc-i2c-bus
+  - nvidia,hpd-gpio
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+
+    hdmi@54280000 {
+        compatible = "nvidia,tegra124-hdmi";
+        reg = <0x54280000 0x00040000>;
+        interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+                 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+        clock-names = "hdmi", "parent";
+        resets = <&tegra_car 51>;
+        reset-names = "hdmi";
+
+        hdmi-supply = <&vdd_5v0_hdmi>;
+        pll-supply = <&vdd_hdmi_pll>;
+        vdd-supply = <&vdd_3v3_hdmi>;
+
+        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
deleted file mode 100644
index 9999255ac5b6..000000000000
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ /dev/null
@@ -1,419 +0,0 @@
-NVIDIA Tegra host1x
-
-Required properties:
-- compatible: "nvidia,tegra<chip>-host1x"
-- reg: Physical base address and length of the controller's registers.
-  For pre-Tegra186, one entry describing the whole register area.
-  For Tegra186, one entry for each entry in reg-names:
-    "vm" - VM region assigned to Linux
-    "hypervisor" - Hypervisor region (only if Linux acts as hypervisor)
-- interrupts: The interrupt outputs from the controller.
-- #address-cells: The number of cells used to represent physical base addresses
-  in the host1x address space. Should be 1.
-- #size-cells: The number of cells used to represent the size of an address
-  range in the host1x address space. Should be 1.
-- ranges: The mapping of the host1x address space to the CPU address space.
-- clocks: Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - host1x
-
-The host1x top-level node defines a number of children, each representing one
-of the following host1x client modules:
-
-- mpe: video encoder
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-mpe"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - mpe
-
-- vi: video input
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-vi"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - vi
-
-- epp: encoder pre-processor
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-epp"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - epp
-
-- isp: image signal processor
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-isp"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - isp
-
-- gr2d: 2D graphics engine
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-gr2d"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - 2d
-
-- gr3d: 3D graphics engine
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-gr3d"
-  - reg: Physical base address and length of the controller's registers.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    (This property may be omitted if the only clock in the list is "3d")
-    - 3d
-      This MUST be the first entry.
-    - 3d2 (Only required on SoCs with two 3D clocks)
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - 3d
-    - 3d2 (Only required on SoCs with two 3D clocks)
-
-- dc: display controller
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-dc"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dc
-      This MUST be the first entry.
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dc
-  - nvidia,head: The number of the display controller head. This is used to
-    setup the various types of output to receive video data from the given
-    head.
-
-  Each display controller node has a child node, named "rgb", that represents
-  the RGB output associated with the controller. It can take the following
-  optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-
-- hdmi: High Definition Multimedia Interface
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-hdmi"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - hdmi-supply: supply for the +5V HDMI connector pin
-  - vdd-supply: regulator for supply voltage
-  - pll-supply: regulator for PLL
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - hdmi
-      This MUST be the first entry.
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - hdmi
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-
-- tvo: TV encoder output
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-tvo"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-
-- dsi: display serial interface
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-dsi"
-  - reg: Physical base address and length of the controller's registers.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dsi
-      This MUST be the first entry.
-    - lp
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dsi
-  - avdd-dsi-supply: phandle of a supply that powers the DSI controller
-  - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
-    which pads are used by this DSI output and need to be calibrated. See also
-    ../display/tegra/nvidia,tegra114-mipi.txt.
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - nvidia,ganged-mode: contains a phandle to a second DSI controller to gang
-    up with in order to support up to 8 data lanes
-
-- sor: serial output resource
-
-  Required properties:
-  - compatible: Should be:
-    - "nvidia,tegra124-sor": for Tegra124 and Tegra132
-    - "nvidia,tegra132-sor": for Tegra132
-    - "nvidia,tegra210-sor": for Tegra210
-    - "nvidia,tegra210-sor1": for Tegra210
-    - "nvidia,tegra186-sor": for Tegra186
-    - "nvidia,tegra186-sor1": for Tegra186
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - sor: clock input for the SOR hardware
-    - out: SOR output clock
-    - parent: input for the pixel clock
-    - dp: reference clock for the SOR clock
-    - safe: safe reference for the SOR clock during power up
-
-    For Tegra186 and later:
-    - pad: SOR pad output clock (on Tegra186 and later)
-
-    Obsolete:
-    - source: source clock for the SOR clock (obsolete, use "out" instead)
-
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - sor
-
-  Required properties on Tegra186 and later:
-  - nvidia,interface: index of the SOR interface
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - nvidia,xbar-cfg: 5 cells containing the crossbar configuration. Each lane
-    of the SOR, identified by the cell's index, is mapped via the crossbar to
-    the pad specified by the cell's value.
-
-  Optional properties when driving an eDP output:
-  - nvidia,dpaux: phandle to a DispayPort AUX interface
-
-- dpaux: DisplayPort AUX interface
-  - compatible : Should contain one of the following:
-    - "nvidia,tegra124-dpaux": for Tegra124 and Tegra132
-    - "nvidia,tegra210-dpaux": for Tegra210
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dpaux: clock input for the DPAUX hardware
-    - parent: reference clock
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dpaux
-  - vdd-supply: phandle of a supply that powers the DisplayPort link
-  - i2c-bus: Subnode where I2C slave devices are listed. This subnode
-    must be always present. If there are no I2C slave devices, an empty
-    node should be added. See ../../i2c/i2c.txt for more information.
-
-  See ../pinctrl/nvidia,tegra124-dpaux-padctl.txt for information
-  regarding the DPAUX pad controller bindings.
-
-- vic: Video Image Compositor
-  - compatible : "nvidia,tegra<chip>-vic"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - vic: clock input for the VIC hardware
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - vic
-
-Example:
-
-/ {
-	...
-
-	host1x {
-		compatible = "nvidia,tegra20-host1x", "simple-bus";
-		reg = <0x50000000 0x00024000>;
-		interrupts = <0 65 0x04   /* mpcore syncpt */
-			      0 67 0x04>; /* mpcore general */
-		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0x54000000 0x54000000 0x04000000>;
-
-		mpe {
-			compatible = "nvidia,tegra20-mpe";
-			reg = <0x54040000 0x00040000>;
-			interrupts = <0 68 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_MPE>;
-			resets = <&tegra_car 60>;
-			reset-names = "mpe";
-		};
-
-		vi {
-			compatible = "nvidia,tegra20-vi";
-			reg = <0x54080000 0x00040000>;
-			interrupts = <0 69 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_VI>;
-			resets = <&tegra_car 100>;
-			reset-names = "vi";
-		};
-
-		epp {
-			compatible = "nvidia,tegra20-epp";
-			reg = <0x540c0000 0x00040000>;
-			interrupts = <0 70 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_EPP>;
-			resets = <&tegra_car 19>;
-			reset-names = "epp";
-		};
-
-		isp {
-			compatible = "nvidia,tegra20-isp";
-			reg = <0x54100000 0x00040000>;
-			interrupts = <0 71 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_ISP>;
-			resets = <&tegra_car 23>;
-			reset-names = "isp";
-		};
-
-		gr2d {
-			compatible = "nvidia,tegra20-gr2d";
-			reg = <0x54140000 0x00040000>;
-			interrupts = <0 72 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
-		};
-
-		gr3d {
-			compatible = "nvidia,tegra20-gr3d";
-			reg = <0x54180000 0x00040000>;
-			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
-		};
-
-		dc@54200000 {
-			compatible = "nvidia,tegra20-dc";
-			reg = <0x54200000 0x00040000>;
-			interrupts = <0 73 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
-				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 27>;
-			reset-names = "dc";
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		dc@54240000 {
-			compatible = "nvidia,tegra20-dc";
-			reg = <0x54240000 0x00040000>;
-			interrupts = <0 74 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
-				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 26>;
-			reset-names = "dc";
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		hdmi {
-			compatible = "nvidia,tegra20-hdmi";
-			reg = <0x54280000 0x00040000>;
-			interrupts = <0 75 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
-				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
-			clock-names = "hdmi", "parent";
-			resets = <&tegra_car 51>;
-			reset-names = "hdmi";
-			status = "disabled";
-		};
-
-		tvo {
-			compatible = "nvidia,tegra20-tvo";
-			reg = <0x542c0000 0x00040000>;
-			interrupts = <0 76 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_TVO>;
-			status = "disabled";
-		};
-
-		dsi {
-			compatible = "nvidia,tegra20-dsi";
-			reg = <0x54300000 0x00040000>;
-			clocks = <&tegra_car TEGRA20_CLK_DSI>,
-				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
-			clock-names = "dsi", "parent";
-			resets = <&tegra_car 48>;
-			reset-names = "dsi";
-			status = "disabled";
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
new file mode 100644
index 000000000000..913ca104c871
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
@@ -0,0 +1,431 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-host1x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra host1x controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The host1x top-level node defines a number of children, each
+  representing one of the host1x client modules defined in this binding.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-host1x
+          - nvidia,tegra30-host1x
+          - nvidia,tegra114-host1x
+          - nvidia,tegra124-host1x
+          - nvidia,tegra210-host1x
+          - nvidia,tegra186-host1x
+          - nvidia,tegra194-host1x
+          - nvidia,tegra234-host1x
+
+      - items:
+          - const: nvidia,tegra132-host1x
+          - const: nvidia,tegra124-host1x
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    minItems: 1
+    maxItems: 9
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 9
+
+  '#address-cells':
+    description: The number of cells used to represent physical base addresses
+      in the host1x address space.
+    enum: [1, 2]
+
+  '#size-cells':
+    description: The number of cells used to represent the size of an address
+      range in the host1x address space.
+    enum: [1, 2]
+
+  ranges:
+    maxItems: 1
+
+  clocks:
+    description: Must contain one entry, for the module clock. See
+      ../clocks/clock-bindings.txt for details.
+
+  clock-names:
+    items:
+      - const: host1x
+
+  resets:
+    minItems: 1 # MC reset is optional on Tegra186 and later
+    items:
+      - description: module reset
+      - description: memory client hotflush reset
+
+  reset-names:
+    minItems: 1 # MC reset is optional on Tegra186 and later
+    items:
+      - const: host1x
+      - const: mc
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory read client for host1x
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the HEG or core power domain
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties:
+  type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-host1x
+              - nvidia,tegra30-host1x
+              - nvidia,tegra114-host1x
+              - nvidia,tegra124-host1x
+              - nvidia,tegra210-host1x
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt
+            - const: host1x
+      required:
+        - resets
+        - reset-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-host1x
+              - nvidia,tegra194-host1x
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: hypervisor
+            - const: vm
+
+        reg:
+          items:
+            - description: region used by the hypervisor
+            - description: region assigned to the virtual machine
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          maxItems: 1
+
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt
+            - const: host1x
+
+        iommu-map:
+          description: Specification of stream IDs available for memory context device
+            use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
+            usable stream IDs.
+
+      required:
+        - reg-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-host1x
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: common
+            - const: hypervisor
+            - const: vm
+
+        reg:
+          items:
+            - description: region used by host1x server
+            - description: region used by the hypervisor
+            - description: region assigned to the virtual machine
+
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt 0
+            - description: host1x syncpoint interrupt 1
+            - description: host1x syncpoint interrupt 2
+            - description: host1x syncpoint interrupt 3
+            - description: host1x syncpoint interrupt 4
+            - description: host1x syncpoint interrupt 5
+            - description: host1x syncpoint interrupt 6
+            - description: host1x syncpoint interrupt 7
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt0
+            - const: syncpt1
+            - const: syncpt2
+            - const: syncpt3
+            - const: syncpt4
+            - const: syncpt5
+            - const: syncpt6
+            - const: syncpt7
+            - const: host1x
+
+        iommu-map:
+          description: Specification of stream IDs available for memory context device
+            use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
+            usable stream IDs.
+
+      required:
+        - reg-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    host1x@50000000 {
+        compatible = "nvidia,tegra20-host1x";
+        reg = <0x50000000 0x00024000>;
+        interrupts = <0 65 0x04>, /* mpcore syncpt */
+                     <0 67 0x04>; /* mpcore general */
+        interrupt-names = "syncpt", "host1x";
+        clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+        clock-names = "host1x";
+        resets = <&tegra_car 28>, <&mc TEGRA20_MC_RESET_HC>;
+        reset-names = "host1x", "mc";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x54000000 0x54000000 0x04000000>;
+
+        mpe@54040000 {
+            compatible = "nvidia,tegra20-mpe";
+            reg = <0x54040000 0x00040000>;
+            interrupts = <0 68 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_MPE>;
+            resets = <&tegra_car 60>;
+            reset-names = "mpe";
+        };
+
+        vi@54080000 {
+            compatible = "nvidia,tegra20-vi";
+            reg = <0x54080000 0x00040000>;
+            interrupts = <0 69 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_VI>;
+            resets = <&tegra_car 100>;
+            reset-names = "vi";
+        };
+
+        epp@540c0000 {
+            compatible = "nvidia,tegra20-epp";
+            reg = <0x540c0000 0x00040000>;
+            interrupts = <0 70 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_EPP>;
+            resets = <&tegra_car 19>;
+            reset-names = "epp";
+        };
+
+        isp@54100000 {
+            compatible = "nvidia,tegra20-isp";
+            reg = <0x54100000 0x00040000>;
+            interrupts = <0 71 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_ISP>;
+            resets = <&tegra_car 23>;
+            reset-names = "isp";
+        };
+
+        gr2d@54140000 {
+            compatible = "nvidia,tegra20-gr2d";
+            reg = <0x54140000 0x00040000>;
+            interrupts = <0 72 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+            resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+            reset-names = "2d", "mc";
+        };
+
+        gr3d@54180000 {
+            compatible = "nvidia,tegra20-gr3d";
+            reg = <0x54180000 0x00040000>;
+            clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+            resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+            reset-names = "3d", "mc";
+        };
+
+        dc@54200000 {
+            compatible = "nvidia,tegra20-dc";
+            reg = <0x54200000 0x00040000>;
+            interrupts = <0 73 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+            clock-names = "dc";
+            resets = <&tegra_car 27>;
+            reset-names = "dc";
+
+            rgb {
+            };
+        };
+
+        dc@54240000 {
+            compatible = "nvidia,tegra20-dc";
+            reg = <0x54240000 0x00040000>;
+            interrupts = <0 74 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_DISP2>;
+            clock-names = "dc";
+            resets = <&tegra_car 26>;
+            reset-names = "dc";
+
+            rgb {
+            };
+        };
+
+        hdmi@54280000 {
+            compatible = "nvidia,tegra20-hdmi";
+            reg = <0x54280000 0x00040000>;
+            interrupts = <0 75 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+                     <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+            clock-names = "hdmi", "parent";
+            resets = <&tegra_car 51>;
+            reset-names = "hdmi";
+
+            hdmi-supply = <&vdd_5v0_hdmi>;
+            pll-supply = <&vdd_hdmi_pll>;
+            vdd-supply = <&vdd_3v3_hdmi>;
+
+            nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+            nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+        };
+
+        tvo@542c0000 {
+            compatible = "nvidia,tegra20-tvo";
+            reg = <0x542c0000 0x00040000>;
+            interrupts = <0 76 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_TVO>;
+        };
+
+        dsi@54300000 {
+            compatible = "nvidia,tegra20-dsi";
+            reg = <0x54300000 0x00040000>;
+            clocks = <&tegra_car TEGRA20_CLK_DSI>,
+                     <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+            clock-names = "dsi", "parent";
+            resets = <&tegra_car 48>;
+            reset-names = "dsi";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra210-mc.h>
+
+    host1x@50000000 {
+        compatible = "nvidia,tegra210-host1x";
+        reg = <0x50000000 0x00024000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* mpcore syncpt */
+                     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* mpcore general */
+        interrupt-names = "syncpt", "host1x";
+        clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
+        clock-names = "host1x";
+        resets = <&tegra_car 28>;
+        reset-names = "host1x";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x54000000 0x54000000 0x01000000>;
+        iommus = <&mc TEGRA_SWGROUP_HC>;
+
+        vi@54080000 {
+            compatible = "nvidia,tegra210-vi";
+            reg = <0x54080000 0x00000700>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+            clocks = <&tegra_car TEGRA210_CLK_VI>;
+            power-domains = <&pd_venc>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            ranges = <0x0 0x54080000 0x2000>;
+
+            csi@838 {
+                compatible = "nvidia,tegra210-csi";
+                reg = <0x838 0x1300>;
+                assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+                                  <&tegra_car TEGRA210_CLK_CILCD>,
+                                  <&tegra_car TEGRA210_CLK_CILE>,
+                                  <&tegra_car TEGRA210_CLK_CSI_TPG>;
+                assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+                                         <&tegra_car TEGRA210_CLK_PLL_P>,
+                                         <&tegra_car TEGRA210_CLK_PLL_P>;
+                assigned-clock-rates = <102000000>,
+                                       <102000000>,
+                                       <102000000>,
+                                       <972000000>;
+
+                clocks = <&tegra_car TEGRA210_CLK_CSI>,
+                         <&tegra_car TEGRA210_CLK_CILAB>,
+                         <&tegra_car TEGRA210_CLK_CILCD>,
+                         <&tegra_car TEGRA210_CLK_CILE>,
+                         <&tegra_car TEGRA210_CLK_CSI_TPG>;
+                clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+                power-domains = <&pd_sor>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml
new file mode 100644
index 000000000000..3bc3b22e98e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra ISP processor
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-isp
+      - nvidia,tegra30-isp
+      - nvidia,tegra210-isp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: isp
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # write
+
+  power-domains:
+    items:
+      - description: phandle to the VENC or core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    isp@54100000 {
+        compatible = "nvidia,tegra20-isp";
+        reg = <0x54100000 0x00040000>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_ISP>;
+        resets = <&tegra_car 23>;
+        reset-names = "isp";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml
new file mode 100644
index 000000000000..5f4f0fb4b692
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-mpe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^mpe@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-mpe
+      - nvidia,tegra30-mpe
+      - nvidia,tegra114-mpe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: mpe
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 6
+
+  interconnect-names:
+    maxItems: 6
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the MPE power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mpe@54040000 {
+        compatible = "nvidia,tegra20-mpe";
+        reg = <0x54040000 0x00040000>;
+        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_MPE>;
+        resets = <&tegra_car 60>;
+        reset-names = "mpe";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml
new file mode 100644
index 000000000000..467b015e5700
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-tvo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra TV Encoder Output
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^tvo@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-tvo
+      - nvidia,tegra30-tvo
+      - nvidia,tegra114-tvo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tvo@542c0000 {
+        compatible = "nvidia,tegra20-tvo";
+        reg = <0x542c0000 0x00040000>;
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_TVO>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
new file mode 100644
index 000000000000..782a4b10150a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Input controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^vi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra20-vi
+      - const: nvidia,tegra30-vi
+      - const: nvidia,tegra114-vi
+      - const: nvidia,tegra124-vi
+      - items:
+          - const: nvidia,tegra132-vi
+          - const: nvidia,tegra124-vi
+      - const: nvidia,tegra210-vi
+      - const: nvidia,tegra186-vi
+      - const: nvidia,tegra194-vi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: vi
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    minItems: 4
+    maxItems: 5
+
+  interconnect-names:
+    minItems: 4
+    maxItems: 5
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the VENC power domain
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+  avdd-dsi-csi-supply:
+    description: DSI/CSI power supply. Must supply 1.2 V.
+
+patternProperties:
+  "^csi@[0-9a-f]+$":
+    type: object
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-vi
+              - nvidia,tegra30-vi
+              - nvidia,tegra114-vi
+              - nvidia,tegra124-vi
+    then:
+      required:
+        - resets
+        - reset-names
+    else:
+      required:
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vi@54080000 {
+        compatible = "nvidia,tegra20-vi";
+        reg = <0x54080000 0x00040000>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_VI>;
+        resets = <&tegra_car 100>;
+        reset-names = "vi";
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vi@54080000 {
+        compatible = "nvidia,tegra210-vi";
+        reg = <0x54080000 0x00000700>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+        clocks = <&tegra_car TEGRA210_CLK_VI>;
+        power-domains = <&pd_venc>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x0 0x54080000 0x2000>;
+
+        csi@838 {
+            compatible = "nvidia,tegra210-csi";
+            reg = <0x838 0x1300>;
+            assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+                              <&tegra_car TEGRA210_CLK_CILCD>,
+                              <&tegra_car TEGRA210_CLK_CILE>,
+                              <&tegra_car TEGRA210_CLK_CSI_TPG>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+                                     <&tegra_car TEGRA210_CLK_PLL_P>,
+                                     <&tegra_car TEGRA210_CLK_PLL_P>;
+            assigned-clock-rates = <102000000>,
+                                   <102000000>,
+                                   <102000000>,
+                                   <972000000>;
+
+            clocks = <&tegra_car TEGRA210_CLK_CSI>,
+                     <&tegra_car TEGRA210_CLK_CILAB>,
+                     <&tegra_car TEGRA210_CLK_CILCD>,
+                     <&tegra_car TEGRA210_CLK_CILE>,
+                     <&tegra_car TEGRA210_CLK_CSI_TPG>;
+            clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+            power-domains = <&pd_sor>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
new file mode 100644
index 000000000000..fa07a40d1004
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra210-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra CSI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^csi@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-csi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+      - description: A/B lanes clock
+      - description: C/D lanes clock
+      - description: E lane clock
+      - description: test pattern generator clock
+
+  clock-names:
+    items:
+      - const: csi
+      - const: cilab
+      - const: cilcd
+      - const: cile
+      - const: csi_tpg
+
+  power-domains:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
new file mode 100644
index 000000000000..5c7d2cbc4aac
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments AM65x Display Subsystem
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+description: |
+  The AM65x TI Keystone Display SubSystem with two output ports and
+  two video planes. The first video port supports OLDI and the second
+  supports DPI format. The fist plane is full video plane with all
+  features and the second is a "lite plane" without scaling support.
+
+properties:
+  compatible:
+    const: ti,am65x-dss
+
+  reg:
+    description:
+      Addresses to each DSS memory region described in the SoC's TRM.
+    items:
+      - description: common DSS register area
+      - description: VIDL1 light video plane
+      - description: VID video plane
+      - description: OVR1 overlay manager for vp1
+      - description: OVR2 overlay manager for vp2
+      - description: VP1 video port 1
+      - description: VP2 video port 2
+
+  reg-names:
+    items:
+      - const: common
+      - const: vidl1
+      - const: vid
+      - const: ovr1
+      - const: ovr2
+      - const: vp1
+      - const: vp2
+
+  clocks:
+    items:
+      - description: fck DSS functional clock
+      - description: vp1 Video Port 1 pixel clock
+      - description: vp2 Video Port 2 pixel clock
+
+  clock-names:
+    items:
+      - const: fck
+      - const: vp1
+      - const: vp2
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 3
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+    description: phandle to the associated power domain
+
+  dma-coherent:
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          The DSS OLDI output port node form video port 1
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          The DSS DPI output port node from video port 2
+
+  ti,am65x-oldi-io-ctrl:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description:
+      phandle to syscon device node mapping OLDI IO_CTRL registers.
+      The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
+      following OLDI_DAT1_IO_CTRL, OLDI_DAT2_IO_CTRL, OLDI_DAT3_IO_CTRL,
+      and OLDI_CLK_IO_CTRL registers. This property is needed for OLDI
+      interface to work.
+
+  max-memory-bandwidth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Input memory (from main memory to dispc) bandwidth limit in
+      bytes per second
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    dss: dss@4a00000 {
+            compatible = "ti,am65x-dss";
+            reg =   <0x04a00000 0x1000>, /* common */
+                    <0x04a02000 0x1000>, /* vidl1 */
+                    <0x04a06000 0x1000>, /* vid */
+                    <0x04a07000 0x1000>, /* ovr1 */
+                    <0x04a08000 0x1000>, /* ovr2 */
+                    <0x04a0a000 0x1000>, /* vp1 */
+                    <0x04a0b000 0x1000>; /* vp2 */
+            reg-names = "common", "vidl1", "vid",
+                    "ovr1", "ovr2", "vp1", "vp2";
+            ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+            power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+            clocks =        <&k3_clks 67 1>,
+                            <&k3_clks 216 1>,
+                            <&k3_clks 67 2>;
+            clock-names = "fck", "vp1", "vp2";
+            interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                            reg = <0>;
+                            oldi_out0: endpoint {
+                                    remote-endpoint = <&lcd_in0>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
new file mode 100644
index 000000000000..2986f9acc9f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments J721E Display Subsystem
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+description: |
+  The J721E TI Keystone Display SubSystem with four output ports and
+  four video planes. There is two full video planes and two "lite
+  planes" without scaling support. The video ports can be connected to
+  the SoC's DPI pins or to integrated display bridges on the SoC.
+
+properties:
+  compatible:
+    const: ti,j721e-dss
+
+  reg:
+    items:
+      - description: common_m DSS Master common
+      - description: common_s0 DSS Shared common 0
+      - description: common_s1 DSS Shared common 1
+      - description: common_s2 DSS Shared common 2
+      - description: VIDL1 light video plane 1
+      - description: VIDL2 light video plane 2
+      - description: VID1 video plane 1
+      - description: VID1 video plane 2
+      - description: OVR1 overlay manager for vp1
+      - description: OVR2 overlay manager for vp2
+      - description: OVR3 overlay manager for vp3
+      - description: OVR4 overlay manager for vp4
+      - description: VP1 video port 1
+      - description: VP2 video port 2
+      - description: VP3 video port 3
+      - description: VP4 video port 4
+      - description: WB Write Back
+
+  reg-names:
+    items:
+      - const: common_m
+      - const: common_s0
+      - const: common_s1
+      - const: common_s2
+      - const: vidl1
+      - const: vidl2
+      - const: vid1
+      - const: vid2
+      - const: ovr1
+      - const: ovr2
+      - const: ovr3
+      - const: ovr4
+      - const: vp1
+      - const: vp2
+      - const: vp3
+      - const: vp4
+      - const: wb
+
+  clocks:
+    items:
+      - description: fck DSS functional clock
+      - description: vp1 Video Port 1 pixel clock
+      - description: vp2 Video Port 2 pixel clock
+      - description: vp3 Video Port 3 pixel clock
+      - description: vp4 Video Port 4 pixel clock
+
+  clock-names:
+    items:
+      - const: fck
+      - const: vp1
+      - const: vp2
+      - const: vp3
+      - const: vp4
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 5
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 5
+
+  interrupts:
+    items:
+      - description: common_m DSS Master common
+      - description: common_s0 DSS Shared common 0
+      - description: common_s1 DSS Shared common 1
+      - description: common_s2 DSS Shared common 2
+
+  interrupt-names:
+    items:
+      - const: common_m
+      - const: common_s0
+      - const: common_s1
+      - const: common_s2
+
+  power-domains:
+    maxItems: 1
+    description: phandle to the associated power domain
+
+  dma-coherent:
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          The output port node form video port 1
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          The output port node from video port 2
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          The output port node from video port 3
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          The output port node from video port 4
+
+  max-memory-bandwidth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Input memory (from main memory to dispc) bandwidth limit in
+      bytes per second
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    dss: dss@4a00000 {
+            compatible = "ti,j721e-dss";
+            reg =   <0x04a00000 0x10000>, /* common_m */
+                    <0x04a10000 0x10000>, /* common_s0*/
+                    <0x04b00000 0x10000>, /* common_s1*/
+                    <0x04b10000 0x10000>, /* common_s2*/
+                    <0x04a20000 0x10000>, /* vidl1 */
+                    <0x04a30000 0x10000>, /* vidl2 */
+                    <0x04a50000 0x10000>, /* vid1 */
+                    <0x04a60000 0x10000>, /* vid2 */
+                    <0x04a70000 0x10000>, /* ovr1 */
+                    <0x04a90000 0x10000>, /* ovr2 */
+                    <0x04ab0000 0x10000>, /* ovr3 */
+                    <0x04ad0000 0x10000>, /* ovr4 */
+                    <0x04a80000 0x10000>, /* vp1 */
+                    <0x04aa0000 0x10000>, /* vp2 */
+                    <0x04ac0000 0x10000>, /* vp3 */
+                    <0x04ae0000 0x10000>, /* vp4 */
+                    <0x04af0000 0x10000>; /* wb */
+            reg-names = "common_m", "common_s0",
+                    "common_s1", "common_s2",
+                    "vidl1", "vidl2","vid1","vid2",
+                    "ovr1", "ovr2", "ovr3", "ovr4",
+                    "vp1", "vp2", "vp3", "vp4",
+                    "wb";
+            clocks =        <&k3_clks 152 0>,
+                            <&k3_clks 152 1>,
+                            <&k3_clks 152 4>,
+                            <&k3_clks 152 9>,
+                            <&k3_clks 152 13>;
+            clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
+            power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+            interrupts =    <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names =       "common_m",
+                                    "common_s0",
+                                    "common_s1",
+                                    "common_s2";
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                            reg = <0>;
+
+                            dpi_out_0: endpoint {
+                                    remote-endpoint = <&dp_bridge_input>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
new file mode 100644
index 000000000000..7ce7bbad5780
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments K2G Display Subsystem
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+description: |
+  The K2G DSS is an ultra-light version of TI Keystone Display
+  SubSystem. It has only one output port and video plane. The
+  output is DPI.
+
+properties:
+  compatible:
+    const: ti,k2g-dss
+
+  reg:
+    items:
+      - description: cfg DSS top level
+      - description: common DISPC common
+      - description: VID1 video plane 1
+      - description: OVR1 overlay manager for vp1
+      - description: VP1 video port 1
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: common
+      - const: vid1
+      - const: ovr1
+      - const: vp1
+
+  clocks:
+    items:
+      - description: fck DSS functional clock
+      - description: vp1 Video Port 1 pixel clock
+
+  clock-names:
+    items:
+      - const: fck
+      - const: vp1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+    description: phandle to the associated power domain
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      The DSS DPI output port node
+
+  max-memory-bandwidth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Input memory (from main memory to dispc) bandwidth limit in
+      bytes per second
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    dss: dss@2540000 {
+            compatible = "ti,k2g-dss";
+            reg =   <0x02540000 0x400>,
+                    <0x02550000 0x1000>,
+                    <0x02557000 0x1000>,
+                    <0x0255a800 0x100>,
+                    <0x0255ac00 0x100>;
+            reg-names = "cfg", "common", "vid1", "ovr1", "vp1";
+            clocks =        <&k2g_clks 0x2 0>,
+                            <&k2g_clks 0x2 1>;
+            clock-names = "fck", "vp1";
+            interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>;
+
+            power-domains = <&k2g_pds 0x2>;
+
+            max-memory-bandwidth = <230000000>;
+
+            port {
+                    dpi_out: endpoint {
+                            remote-endpoint = <&sii9022_in>;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
index aac617acb64f..3b3d0bbfcfff 100644
--- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
+++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
@@ -37,7 +37,7 @@ Optional nodes:
    supports a single port with a single endpoint.
 
  - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
-   Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt for connecting
+   Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml for connecting
    tfp410 DVI encoder or lcd panel to lcdc
 
 [1] There is an errata about AM335x color wiring. For 16-bit color mode
@@ -46,7 +46,7 @@ Optional nodes:
     crossed and LCD_DATA[0:4] is for Red[3:7] and LCD_DATA[11:15] is
     for Blue[3-7]. For more details see section 3.1.1 in AM335x
     Silicon Errata:
-    http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
+    https://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
 
 Example:
 
@@ -60,7 +60,7 @@ Example:
 		blue-and-red-wiring = "crossed";
 
 		port {
-			lcdc_0: endpoint@0 {
+			lcdc_0: endpoint {
 				remote-endpoint = <&hdmi_0>;
 			};
 		};
@@ -75,7 +75,7 @@ Example:
 		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
 
 		port {
-			hdmi_0: endpoint@0 {
+			hdmi_0: endpoint {
 				remote-endpoint = <&lcdc_0>;
 			};
 		};
diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
new file mode 100644
index 000000000000..10ec78ca1c65
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/xlnx/xlnx,zynqmp-dpsub.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DisplayPort Subsystem
+
+description: |
+  The DisplayPort subsystem of Xilinx ZynqMP (Zynq UltraScale+ MPSoC)
+  implements the display and audio pipelines based on the DisplayPort v1.2
+  standard. The subsystem includes multiple functional blocks as below:
+
+               +------------------------------------------------------------+
+  +--------+   | +----------------+     +-----------+                       |
+  | DPDMA  | --->|                | --> |   Video   | Video +-------------+ |
+  | 4x vid |   | |                |     | Rendering | -+--> |             | |   +------+
+  | 2x aud |   | |  Audio/Video   | --> | Pipeline  |  |    | DisplayPort |---> | PHY0 |
+  +--------+   | | Buffer Manager |     +-----------+  |    |   Source    | |   +------+
+               | |    and STC     |     +-----------+  |    | Controller  | |   +------+
+  Live Video --->|                | --> |   Audio   | Audio |             |---> | PHY1 |
+               | |                |     |   Mixer   | --+-> |             | |   +------+
+  Live Audio --->|                | --> |           |  ||   +-------------+ |
+               | +----------------+     +-----------+  ||                   |
+               +---------------------------------------||-------------------+
+                                                       vv
+                                                 Blended Video and
+                                                 Mixed Audio to PL
+
+  The Buffer Manager interacts with external interface such as DMA engines or
+  live audio/video streams from the programmable logic. The Video Rendering
+  Pipeline blends the video and graphics layers and performs colorspace
+  conversion. The Audio Mixer mixes the incoming audio streams. The DisplayPort
+  Source Controller handles the DisplayPort protocol and connects to external
+  PHYs.
+
+  The subsystem supports 2 video and 2 audio streams, and various pixel formats
+  and depths up to 4K@30 resolution.
+
+  Please refer to "Zynq UltraScale+ Device Technical Reference Manual"
+  (https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf)
+  for more details.
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-dpsub-1.7
+
+  reg:
+    maxItems: 4
+  reg-names:
+    items:
+      - const: dp
+      - const: blend
+      - const: av_buf
+      - const: aud
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      The APB clock and at least one video clock are mandatory, the audio clock
+      is optional.
+    minItems: 2
+    items:
+      - description: dp_apb_clk is the APB clock
+      - description: dp_aud_clk is the Audio clock
+      - description:
+          dp_vtc_pixel_clk_in is the non-live video clock (from Processing
+          System)
+      - description:
+          dp_live_video_in_clk is the live video clock (from Programmable
+          Logic)
+  clock-names:
+    oneOf:
+      - minItems: 2
+        items:
+          - const: dp_apb_clk
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+      - minItems: 3
+        items:
+          - const: dp_apb_clk
+          - const: dp_aud_clk
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: Video layer, plane 0 (RGB or luma)
+      - description: Video layer, plane 1 (U/V or U)
+      - description: Video layer, plane 2 (V)
+      - description: Graphics layer
+  dma-names:
+    items:
+      - const: vid0
+      - const: vid1
+      - const: vid2
+      - const: gfx0
+
+  phys:
+    description: PHYs for the DP data lanes
+    minItems: 1
+    maxItems: 2
+  phy-names:
+    minItems: 1
+    items:
+      - const: dp-phy0
+      - const: dp-phy1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - dmas
+  - dma-names
+  - phys
+  - phy-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+    display@fd4a0000 {
+        compatible = "xlnx,zynqmp-dpsub-1.7";
+        reg = <0xfd4a0000 0x1000>,
+              <0xfd4aa000 0x1000>,
+              <0xfd4ab000 0x1000>,
+              <0xfd4ac000 0x1000>;
+        reg-names = "dp", "blend", "av_buf", "aud";
+        interrupts = <0 119 4>;
+        interrupt-parent = <&gic>;
+
+        clock-names = "dp_apb_clk", "dp_aud_clk", "dp_live_video_in_clk";
+        clocks = <&dp_aclk>, <&clkc 17>, <&si570_1>;
+
+        power-domains = <&pd_dp>;
+        resets = <&reset ZYNQMP_RESET_DP>;
+
+        dma-names = "vid0", "vid1", "vid2", "gfx0";
+        dmas = <&xlnx_dpdma 0>,
+               <&xlnx_dpdma 1>,
+               <&xlnx_dpdma 2>,
+               <&xlnx_dpdma 3>;
+
+        phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+               <&psgtr 0 PHY_TYPE_DP 1 3>;
+
+        phy-names = "dp-phy0", "dp-phy1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
new file mode 100644
index 000000000000..fc02c5d50ce4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
@@ -0,0 +1,301 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Bootlin
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/xylon,logicvc-display.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xylon LogiCVC display controller
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+description: |
+  The Xylon LogiCVC is a display controller that supports multiple layers.
+  It is usually implemented as programmable logic and was optimized for use
+  with Xilinx Zynq-7000 SoCs and Xilinx FPGAs.
+
+  Because the controller is intended for use in a FPGA, most of the
+  configuration of the controller takes place at logic configuration bitstream
+  synthesis time. As a result, many of the device-tree bindings are meant to
+  reflect the synthesis configuration and must not be configured differently.
+  Matching synthesis parameters are provided when applicable.
+
+  Layers are declared in the "layers" sub-node and have dedicated configuration.
+  In version 3 of the controller, each layer has fixed memory offset and address
+  starting from the video memory base address for its framebuffer. In version 4,
+  framebuffers are configured with a direct memory address instead.
+
+properties:
+  compatible:
+    enum:
+      - xylon,logicvc-3.02.a-display
+      - xylon,logicvc-4.01.a-display
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    items:
+      # vclk is required and must be provided as first item.
+      - const: vclk
+      # Other clocks are optional and can be provided in any order.
+      - enum:
+          - vclk2
+          - lvdsclk
+          - lvdsclkn
+      - enum:
+          - vclk2
+          - lvdsclk
+          - lvdsclkn
+      - enum:
+          - vclk2
+          - lvdsclk
+          - lvdsclkn
+
+  interrupts:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+
+  xylon,display-interface:
+    enum:
+      # Parallel RGB interface (C_DISPLAY_INTERFACE == 0)
+      - parallel-rgb
+      # ITU-T BR656 interface (C_DISPLAY_INTERFACE == 1)
+      - bt656
+      # 4-bit LVDS interface (C_DISPLAY_INTERFACE == 2)
+      - lvds-4bits
+      # 3-bit LVDS interface (C_DISPLAY_INTERFACE == 4)
+      - lvds-3bits
+      # DVI interface (C_DISPLAY_INTERFACE == 5)
+      - dvi
+    description: Display output interface (C_DISPLAY_INTERFACE).
+
+  xylon,display-colorspace:
+    enum:
+      # RGB colorspace (C_DISPLAY_COLOR_SPACE == 0)
+      - rgb
+      # YUV 4:2:2 colorspace (C_DISPLAY_COLOR_SPACE == 1)
+      - yuv422
+      # YUV 4:4:4 colorspace (C_DISPLAY_COLOR_SPACE == 2)
+      - yuv444
+    description: Display output colorspace (C_DISPLAY_COLOR_SPACE).
+
+  xylon,display-depth:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: Display output depth (C_PIXEL_DATA_WIDTH).
+
+  xylon,row-stride:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE).
+
+  xylon,dithering:
+    $ref: "/schemas/types.yaml#/definitions/flag"
+    description: Dithering module is enabled (C_XCOLOR)
+
+  xylon,background-layer:
+    $ref: "/schemas/types.yaml#/definitions/flag"
+    description: |
+      The last layer is used to display a black background (C_USE_BACKGROUND).
+      The layer must still be registered.
+
+  xylon,layers-configurable:
+    $ref: "/schemas/types.yaml#/definitions/flag"
+    description: |
+      Configuration of layers' size, position and offset is enabled
+      (C_USE_SIZE_POSITION).
+
+  layers:
+    type: object
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^layer@[0-9]+$":
+        type: object
+
+        properties:
+          reg:
+            maxItems: 1
+
+          xylon,layer-depth:
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            description: Layer depth (C_LAYER_X_DATA_WIDTH).
+
+          xylon,layer-colorspace:
+            enum:
+              # RGB colorspace (C_LAYER_X_TYPE == 0)
+              - rgb
+              # YUV packed colorspace (C_LAYER_X_TYPE == 0)
+              - yuv
+            description: Layer colorspace (C_LAYER_X_TYPE).
+
+          xylon,layer-alpha-mode:
+            enum:
+              # Alpha is configured layer-wide (C_LAYER_X_ALPHA_MODE == 0)
+              - layer
+              # Alpha is configured per-pixel (C_LAYER_X_ALPHA_MODE == 1)
+              - pixel
+            description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE).
+
+          xylon,layer-base-offset:
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            description: |
+              Offset in number of lines (C_LAYER_X_OFFSET) starting from the
+              video RAM base (C_VMEM_BASEADDR), only for version 3.
+
+          xylon,layer-buffer-offset:
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            description: |
+              Offset in number of lines (C_BUFFER_*_OFFSET) starting from the
+              layer base offset for the second buffer used in double-buffering.
+
+          xylon,layer-primary:
+            $ref: "/schemas/types.yaml#/definitions/flag"
+            description: |
+              Layer should be registered as a primary plane (exactly one is
+              required).
+
+        additionalProperties: false
+
+        required:
+          - reg
+          - xylon,layer-depth
+          - xylon,layer-colorspace
+          - xylon,layer-alpha-mode
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - layer@0
+
+    additionalProperties: false
+
+    description: |
+      The description of the display controller layers, containing layer
+      sub-nodes that each describe a registered layer.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: |
+      Video output port, typically connected to a panel or bridge.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - xylon,display-interface
+  - xylon,display-colorspace
+  - xylon,display-depth
+  - xylon,row-stride
+  - layers
+  - port
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    logicvc: logicvc@43c00000 {
+      compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd";
+      reg = <0x43c00000 0x6000>;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      logicvc_display: display@0 {
+        compatible = "xylon,logicvc-3.02.a-display";
+        reg = <0x0 0x6000>;
+
+        memory-region = <&logicvc_cma>;
+
+        clocks = <&logicvc_vclk 0>, <&logicvc_lvdsclk 0>;
+        clock-names = "vclk", "lvdsclk";
+
+        interrupt-parent = <&intc>;
+        interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+
+        xylon,display-interface = "lvds-4bits";
+        xylon,display-colorspace = "rgb";
+        xylon,display-depth = <16>;
+        xylon,row-stride = <1024>;
+
+        xylon,layers-configurable;
+
+        layers {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          layer@0 {
+            reg = <0>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <0>;
+            xylon,layer-buffer-offset = <480>;
+            xylon,layer-primary;
+          };
+
+          layer@1 {
+            reg = <1>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <2400>;
+            xylon,layer-buffer-offset = <480>;
+          };
+
+          layer@2 {
+            reg = <2>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <960>;
+            xylon,layer-buffer-offset = <480>;
+          };
+
+          layer@3 {
+            reg = <3>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <480>;
+            xylon,layer-buffer-offset = <480>;
+          };
+
+          layer@4 {
+            reg = <4>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <8192>;
+            xylon,layer-buffer-offset = <480>;
+          };
+        };
+
+        port {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          logicvc_output: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&panel_input>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/zte,vou.txt b/Documentation/devicetree/bindings/display/zte,vou.txt
deleted file mode 100644
index 38476475fd60..000000000000
--- a/Documentation/devicetree/bindings/display/zte,vou.txt
+++ /dev/null
@@ -1,120 +0,0 @@
-ZTE VOU Display Controller
-
-This is a display controller found on ZTE ZX296718 SoC.  It includes multiple
-Graphic Layer (GL) and Video Layer (VL), two Mixers/Channels, and a few blocks
-handling scaling, color space conversion etc.  VOU also integrates the support
-for typical output devices, like HDMI, TV Encoder, VGA, and RGB LCD.
-
-* Master VOU node
-
-It must be the parent node of all the sub-device nodes.
-
-Required properties:
- - compatible: should be "zte,zx296718-vou"
- - #address-cells: should be <1>
- - #size-cells: should be <1>
- - ranges: list of address translations between VOU and sub-devices
-
-* VOU DPC device
-
-Required properties:
- - compatible: should be "zte,zx296718-dpc"
- - reg: Physical base address and length of DPC register regions, one for each
-   entry in 'reg-names'
- - reg-names: The names of register regions. The following regions are required:
-	"osd"
-	"timing_ctrl"
-	"dtrc"
-	"vou_ctrl"
-	"otfppu"
- - interrupts: VOU DPC interrupt number to CPU
- - clocks: A list of phandle + clock-specifier pairs, one for each entry
-   in 'clock-names'
- - clock-names: A list of clock names.  The following clocks are required:
-	"aclk"
-	"ppu_wclk"
-	"main_wclk"
-	"aux_wclk"
-
-* HDMI output device
-
-Required properties:
- - compatible: should be "zte,zx296718-hdmi"
- - reg: Physical base address and length of the HDMI device IO region
- - interrupts : HDMI interrupt number to CPU
- - clocks: A list of phandle + clock-specifier pairs, one for each entry
-   in 'clock-names'
- - clock-names: A list of clock names.  The following clocks are required:
-	"osc_cec"
-	"osc_clk"
-	"xclk"
-
-* TV Encoder output device
-
-Required properties:
- - compatible: should be "zte,zx296718-tvenc"
- - reg: Physical base address and length of the TVENC device IO region
- - zte,tvenc-power-control: the phandle to SYSCTRL block followed by two
-   integer cells.  The first cell is the offset of SYSCTRL register used
-   to control TV Encoder DAC power, and the second cell is the bit mask.
-
-* VGA output device
-
-Required properties:
- - compatible: should be "zte,zx296718-vga"
- - reg: Physical base address and length of the VGA device IO region
- - interrupts : VGA interrupt number to CPU
- - clocks: Phandle with clock-specifier pointing to VGA I2C clock.
- - clock-names: Must be "i2c_wclk".
- - zte,vga-power-control: the phandle to SYSCTRL block followed by two
-   integer cells.  The first cell is the offset of SYSCTRL register used
-   to control VGA DAC power, and the second cell is the bit mask.
-
-Example:
-
-vou: vou@1440000 {
-	compatible = "zte,zx296718-vou";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 0x1440000 0x10000>;
-
-	dpc: dpc@0 {
-		compatible = "zte,zx296718-dpc";
-		reg = <0x0000 0x1000>, <0x1000 0x1000>,
-		      <0x5000 0x1000>, <0x6000 0x1000>,
-		      <0xa000 0x1000>;
-		reg-names = "osd", "timing_ctrl",
-			    "dtrc", "vou_ctrl",
-			    "otfppu";
-		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>,
-			 <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>;
-		clock-names = "aclk", "ppu_wclk",
-			      "main_wclk", "aux_wclk";
-	};
-
-	vga: vga@8000 {
-		compatible = "zte,zx296718-vga";
-		reg = <0x8000 0x1000>;
-		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&topcrm VGA_I2C_WCLK>;
-		clock-names = "i2c_wclk";
-		zte,vga-power-control = <&sysctrl 0x170 0xe0>;
-	};
-
-	hdmi: hdmi@c000 {
-		compatible = "zte,zx296718-hdmi";
-		reg = <0xc000 0x4000>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&topcrm HDMI_OSC_CEC>,
-			 <&topcrm HDMI_OSC_CLK>,
-			 <&topcrm HDMI_XCLK>;
-		clock-names = "osc_cec", "osc_clk", "xclk";
-	};
-
-	tvenc: tvenc@2000 {
-		compatible = "zte,zx296718-tvenc";
-		reg = <0x2000 0x1000>;
-		zte,tvenc-power-control = <&sysctrl 0x170 0x10>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
index b38ee732efa9..cd17684aaab5 100644
--- a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
@@ -1,4 +1,4 @@
-Analog Device AXI-DMAC DMA controller
+Analog Devices AXI-DMAC DMA controller
 
 Required properties:
  - compatible: Must be "adi,axi-dmac-1.00.a".
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
index 83808199657b..26d0d8ab7984 100644
--- a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/allwinner,sun4i-a10-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 DMA Controller Device Tree Bindings
+title: Allwinner A10 DMA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
index 9e53472be194..bd599bda2653 100644
--- a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/allwinner,sun50i-a64-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A64 DMA Controller Device Tree Bindings
+title: Allwinner A64 DMA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -19,9 +19,15 @@ properties:
     description: The cell is the request line number.
 
   compatible:
-    enum:
-      - allwinner,sun50i-a64-dma
-      - allwinner,sun50i-h6-dma
+    oneOf:
+      - enum:
+          - allwinner,sun20i-d1-dma
+          - allwinner,sun50i-a64-dma
+          - allwinner,sun50i-a100-dma
+          - allwinner,sun50i-h6-dma
+      - items:
+          - const: allwinner,sun8i-r40-dma
+          - const: allwinner,sun50i-a64-dma
 
   reg:
     maxItems: 1
@@ -53,12 +59,15 @@ required:
 if:
   properties:
     compatible:
-      const: allwinner,sun50i-h6-dma
+      enum:
+        - allwinner,sun20i-d1-dma
+        - allwinner,sun50i-a100-dma
+        - allwinner,sun50i-h6-dma
 
 then:
   properties:
     clocks:
-      maxItems: 2
+      minItems: 2
 
   required:
     - clock-names
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
index c1676b96daac..344dc7e04931 100644
--- a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/allwinner,sun6i-a31-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 DMA Controller Device Tree Bindings
+title: Allwinner A31 DMA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -19,12 +19,12 @@ properties:
     description: The cell is the request line number.
 
   compatible:
-    oneOf:
-      - const: allwinner,sun6i-a31-dma
-      - const: allwinner,sun8i-a23-dma
-      - const: allwinner,sun8i-a83t-dma
-      - const: allwinner,sun8i-h3-dma
-      - const: allwinner,sun8i-v3s-dma
+    enum:
+      - allwinner,sun6i-a31-dma
+      - allwinner,sun8i-a23-dma
+      - allwinner,sun8i-a83t-dma
+      - allwinner,sun8i-h3-dma
+      - allwinner,sun8i-v3s-dma
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
new file mode 100644
index 000000000000..b53ac7631a76
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/altr,msgdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera mSGDMA IP core
+
+maintainers:
+  - Olivier Dautricourt <olivierdautricourt@gmail.com>
+
+description: |
+  Altera / Intel modular Scatter-Gather Direct Memory Access (mSGDMA)
+  intellectual property (IP)
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    const: altr,socfpga-msgdma
+
+  reg:
+    items:
+      - description: Control and Status Register Slave Port
+      - description: Descriptor Slave Port
+      - description: Response Slave Port (Optional)
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: csr
+      - const: desc
+      - const: resp
+    minItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 1
+    description:
+      The cell identifies the channel id (must be 0)
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    msgdma_controller: dma-controller@ff200b00 {
+        compatible = "altr,socfpga-msgdma";
+        reg = <0xff200b00 0x100>, <0xff200c00 0x100>, <0xff200d00 0x100>;
+        reg-names = "csr", "desc", "resp";
+        interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/apple,admac.yaml b/Documentation/devicetree/bindings/dma/apple,admac.yaml
new file mode 100644
index 000000000000..3b1e667f7ea0
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/apple,admac.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/apple,admac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Audio DMA Controller (ADMAC)
+
+description: |
+  Apple's Audio DMA Controller (ADMAC) is used to fetch and store audio samples
+  on SoCs from the "Apple Silicon" family.
+
+  The controller has been seen with up to 24 channels. Even-numbered channels
+  are TX-only, odd-numbered are RX-only. Individual channels are coupled to
+  fixed device endpoints.
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t6000-admac
+          - apple,t8103-admac
+      - const: apple,admac
+
+  reg:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+    description:
+      Clients specify a single cell with channel number.
+
+  dma-channels:
+    maximum: 24
+
+  interrupts:
+    minItems: 4
+    maxItems: 4
+    description:
+      Interrupts that correspond to the 4 IRQ outputs of the controller. Usually
+      only one of the controller outputs will be connected as an usable interrupt
+      source. The remaining interrupts will be left without a valid value, e.g.
+      in an interrupts-extended list the disconnected positions will contain
+      an empty phandle reference <0>.
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#dma-cells'
+  - dma-channels
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    aic: interrupt-controller {
+      interrupt-controller;
+      #interrupt-cells = <3>;
+    };
+
+    admac: dma-controller@238200000 {
+      compatible = "apple,t8103-admac", "apple,admac";
+      reg = <0x38200000 0x34000>;
+      dma-channels = <24>;
+      interrupts-extended = <0>,
+                            <&aic AIC_IRQ 626 IRQ_TYPE_LEVEL_HIGH>,
+                            <0>,
+                            <0>;
+      #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/arm,pl330.yaml b/Documentation/devicetree/bindings/dma/arm,pl330.yaml
new file mode 100644
index 000000000000..4a3dd6f5309b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm,pl330.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/arm,pl330.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCell PL330 DMA Controller
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
+  between memory and peripherals or memory to memory.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl330
+  required:
+    - compatible
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,pl330
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+    description: A single combined interrupt or an interrupt per event
+
+  '#dma-cells':
+    const: 1
+    description: Contains the DMA request number for the consumer
+
+  arm,pl330-broken-no-flushp:
+    type: boolean
+    description: quirk for avoiding to execute DMAFLUSHP
+
+  arm,pl330-periph-burst:
+    type: boolean
+    description: quirk for performing burst transfer only
+
+  dma-coherent: true
+
+  iommus:
+    minItems: 1
+    maxItems: 9
+    description: Up to 1 IOMMU entry per DMA channel for writes and 1
+      IOMMU entry for reads.
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: dma
+      - const: dma-ocp
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma-controller@12680000 {
+        compatible = "arm,pl330", "arm,primecell";
+        reg = <0x12680000 0x1000>;
+        interrupts = <99>;
+        #dma-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.txt b/Documentation/devicetree/bindings/dma/arm-pl08x.txt
deleted file mode 100644
index 0ba81f79266f..000000000000
--- a/Documentation/devicetree/bindings/dma/arm-pl08x.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* ARM PrimeCells PL080 and PL081 and derivatives DMA controller
-
-Required properties:
-- compatible: "arm,pl080", "arm,primecell";
-	      "arm,pl081", "arm,primecell";
-	      "faraday,ftdmac020", "arm,primecell"
-- arm,primecell-periphid: on the FTDMAC020 the primecell ID is not hard-coded
-  in the hardware and must be specified here as <0x0003b080>. This number
-  follows the PrimeCell standard numbering using the JEP106 vendor code 0x38
-  for Faraday Technology.
-- reg: Address range of the PL08x registers
-- interrupt: The PL08x interrupt number
-- clocks: The clock running the IP core clock
-- clock-names: Must contain "apb_pclk"
-- lli-bus-interface-ahb1: if AHB master 1 is eligible for fetching LLIs
-- lli-bus-interface-ahb2: if AHB master 2 is eligible for fetching LLIs
-- mem-bus-interface-ahb1: if AHB master 1 is eligible for fetching memory contents
-- mem-bus-interface-ahb2: if AHB master 2 is eligible for fetching memory contents
-- #dma-cells: must be <2>. First cell should contain the DMA request,
-              second cell should contain either 1 or 2 depending on
-              which AHB master that is used.
-
-Optional properties:
-- dma-channels: contains the total number of DMA channels supported by the DMAC
-- dma-requests: contains the total number of DMA requests supported by the DMAC
-- memcpy-burst-size: the size of the bursts for memcpy: 1, 4, 8, 16, 32
-  64, 128 or 256 bytes are legal values
-- memcpy-bus-width: the bus width used for memcpy in bits: 8, 16 or 32 are legal
-  values, the Faraday FTDMAC020 can also accept 64 bits
-
-Clients
-Required properties:
-- dmas: List of DMA controller phandle, request channel and AHB master id
-- dma-names: Names of the aforementioned requested channels
-
-Example:
-
-dmac0: dma-controller@10130000 {
-	compatible = "arm,pl080", "arm,primecell";
-	reg = <0x10130000 0x1000>;
-	interrupt-parent = <&vica>;
-	interrupts = <15>;
-	clocks = <&hclkdma0>;
-	clock-names = "apb_pclk";
-	lli-bus-interface-ahb1;
-	lli-bus-interface-ahb2;
-	mem-bus-interface-ahb2;
-	memcpy-burst-size = <256>;
-	memcpy-bus-width = <32>;
-	#dma-cells = <2>;
-};
-
-device@40008000 {
-	...
-	dmas = <&dmac0 0 2
-		&dmac0 1 2>;
-	dma-names = "tx", "rx";
-	...
-};
diff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.yaml b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
new file mode 100644
index 000000000000..9193b18fb75f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/arm-pl08x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCells PL080 and PL081 and derivatives DMA controller
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+  - $ref: "dma-controller.yaml#"
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl080
+          - arm,pl081
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - arm,pl080
+              - arm,pl081
+          - const: arm,primecell
+      - items:
+          - const: faraday,ftdma020
+          - const: arm,pl080
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+    description: Address range of the PL08x registers
+
+  interrupts:
+    minItems: 1
+    description: The PL08x interrupt number
+
+  clocks:
+    minItems: 1
+    description: The clock running the IP core clock
+
+  clock-names:
+    maxItems: 1
+
+  lli-bus-interface-ahb1:
+    type: boolean
+    description: if AHB master 1 is eligible for fetching LLIs
+
+  lli-bus-interface-ahb2:
+    type: boolean
+    description: if AHB master 2 is eligible for fetching LLIs
+
+  mem-bus-interface-ahb1:
+    type: boolean
+    description: if AHB master 1 is eligible for fetching memory contents
+
+  mem-bus-interface-ahb2:
+    type: boolean
+    description: if AHB master 2 is eligible for fetching memory contents
+
+  memcpy-burst-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1
+      - 4
+      - 8
+      - 16
+      - 32
+      - 64
+      - 128
+      - 256
+    description: the size of the bursts for memcpy
+
+  memcpy-bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 8
+      - 16
+      - 32
+      - 64
+    description: bus width used for memcpy in bits. FTDMAC020 also accept 64 bits
+
+  resets:
+    maxItems: 1
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#dma-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dmac0: dma-controller@10130000 {
+      compatible = "arm,pl080", "arm,primecell";
+      reg = <0x10130000 0x1000>;
+      interrupt-parent = <&vica>;
+      interrupts = <15>;
+      clocks = <&hclkdma0>;
+      clock-names = "apb_pclk";
+      lli-bus-interface-ahb1;
+      lli-bus-interface-ahb2;
+      mem-bus-interface-ahb2;
+      memcpy-burst-size = <256>;
+      memcpy-bus-width = <32>;
+      #dma-cells = <2>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    dma-controller@67000000 {
+      compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell";
+      /* Faraday Technology FTDMAC020 variant */
+      arm,primecell-periphid = <0x0003b080>;
+      reg = <0x67000000 0x1000>;
+      interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+      resets = <&syscon GEMINI_RESET_DMAC>;
+      clocks = <&syscon GEMINI_CLK_AHB>;
+      clock-names = "apb_pclk";
+      /* Bus interface AHB1 (AHB0) is totally tilted */
+      lli-bus-interface-ahb2;
+      mem-bus-interface-ahb2;
+      memcpy-burst-size = <256>;
+      memcpy-bus-width = <32>;
+      #dma-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt
deleted file mode 100644
index 2c7fd1941abb..000000000000
--- a/Documentation/devicetree/bindings/dma/arm-pl330.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* ARM PrimeCell PL330 DMA Controller
-
-The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
-between memory and peripherals or memory to memory.
-
-Required properties:
-  - compatible: should include both "arm,pl330" and "arm,primecell".
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-
-Optional properties:
-  - dma-coherent      : Present if dma operations are coherent
-  - #dma-cells: must be <1>. used to represent the number of integer
-    cells in the dmas property of client device.
-  - dma-channels: contains the total number of DMA channels supported by the DMAC
-  - dma-requests: contains the total number of DMA requests supported by the DMAC
-  - arm,pl330-broken-no-flushp: quirk for avoiding to execute DMAFLUSHP
-  - resets: contains an entry for each entry in reset-names.
-	    See ../reset/reset.txt for details.
-  - reset-names: must contain at least "dma", and optional is "dma-ocp".
-
-Example:
-
-	pdma0: pdma@12680000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x12680000 0x1000>;
-		interrupts = <99>;
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-	};
-
-Client drivers (device nodes requiring dma transfers from dev-to-mem or
-mem-to-dev) should specify the DMA channel numbers and dma channel names
-as shown below.
-
-  [property name]  = <[phandle of the dma controller] [dma request id]>;
-  [property name]  = <[dma channel name]>
-
-      where 'dma request id' is the dma request number which is connected
-      to the client controller. The 'property name' 'dmas' and 'dma-names'
-      as required by the generic dma device tree binding helpers. The dma
-      names correspond 1:1 with the dma request ids in the dmas property.
-
-  Example:  dmas = <&pdma0 12
-		    &pdma1 11>;
-	    dma-names = "tx", "rx";
diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
index 4dc398e1a371..510b7f25ba24 100644
--- a/Documentation/devicetree/bindings/dma/atmel-xdma.txt
+++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
@@ -2,7 +2,8 @@
 
 * XDMA Controller
 Required properties:
-- compatible: Should be "atmel,sama5d4-dma" or "microchip,sam9x60-dma".
+- compatible: Should be "atmel,sama5d4-dma", "microchip,sam9x60-dma" or
+  "microchip,sama7g5-dma".
 - reg: Should contain DMA registers location and length.
 - interrupts: Should contain DMA interrupt.
 - #dma-cells: Must be <1>, used to represent the number of integer cells in
diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
index 02a34ba2b49b..ad06d36af208 100644
--- a/Documentation/devicetree/bindings/dma/dma-common.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
@@ -31,22 +31,23 @@ properties:
       kernel. i.e. first channel corresponds to LSB.
       The first item in the array is for channels 0-31, the second is for
       channels 32-63, etc.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
       minItems: 1
       # Should be enough
       maxItems: 255
 
   dma-channels:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Number of DMA channels supported by the controller.
 
   dma-requests:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Number of DMA request signals supported by the controller.
 
 required:
   - "#dma-cells"
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml
index c39f6de76670..6d3727267fa8 100644
--- a/Documentation/devicetree/bindings/dma/dma-controller.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml
@@ -17,15 +17,17 @@ properties:
   $nodename:
     pattern: "^dma-controller(@.*)?$"
 
+additionalProperties: true
+
 examples:
   - |
     dma: dma-controller@48000000 {
         compatible = "ti,omap-sdma";
         reg = <0x48000000 0x1000>;
-        interrupts = <0 12 0x4
-                      0 13 0x4
-                      0 14 0x4
-                      0 15 0x4>;
+        interrupts = <0 12 0x4>,
+                     <0 13 0x4>,
+                     <0 14 0x4>,
+                     <0 15 0x4>;
         #dma-cells = <1>;
         dma-channels = <32>;
         dma-requests = <127>;
diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml
index 5b5f07393135..4b817f5dc30e 100644
--- a/Documentation/devicetree/bindings/dma/dma-router.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-router.yaml
@@ -23,7 +23,9 @@ properties:
     pattern: "^dma-router(@.*)?$"
 
   dma-masters:
-    $ref: /schemas/types.yaml#definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Array of phandles to the DMA controllers the router can direct
       the signal to.
@@ -36,6 +38,8 @@ required:
   - "#dma-cells"
   - dma-masters
 
+additionalProperties: true
+
 examples:
   - |
     sdma_xbar: dma-router@4a002b78 {
diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
new file mode 100644
index 000000000000..050e6cd57727
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale enhanced Direct Memory Access(eDMA) Controller
+
+description: |
+  The eDMA channels have multiplex capability by programmable
+  memory-mapped registers. channels are split into two groups, called
+  DMAMUX0 and DMAMUX1, specific DMA request source can only be multiplexed
+  by any channel of certain group, DMAMUX0 or DMAMUX1, but not both.
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-edma
+          - fsl,imx7ulp-edma
+      - items:
+          - const: fsl,ls1028a-edma
+          - const: fsl,vf610-edma
+
+  reg:
+    minItems: 2
+    maxItems: 3
+
+  interrupts:
+    minItems: 2
+    maxItems: 17
+
+  interrupt-names:
+    minItems: 2
+    maxItems: 17
+
+  "#dma-cells":
+    const: 2
+
+  dma-channels:
+    const: 32
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  big-endian:
+    description: |
+      If present registers and hardware scatter/gather descriptors of the
+      eDMA are implemented in big endian mode, otherwise in little mode.
+    type: boolean
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - dma-channels
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,vf610-edma
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: dmamux0
+            - const: dmamux1
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: edma-tx
+            - const: edma-err
+        reg:
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx7ulp-edma
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: dma
+            - const: dmamux0
+        interrupts:
+          maxItems: 17
+        reg:
+          maxItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    edma0: dma-controller@40018000 {
+      #dma-cells = <2>;
+      compatible = "fsl,vf610-edma";
+      reg = <0x40018000 0x2000>,
+            <0x40024000 0x1000>,
+            <0x40025000 0x1000>;
+      interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+                   <0 9 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "edma-tx", "edma-err";
+      dma-channels = <32>;
+      clock-names = "dmamux0", "dmamux1";
+      clocks = <&clks VF610_CLK_DMAMUX0>, <&clks VF610_CLK_DMAMUX1>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+
+    edma1: dma-controller@40080000 {
+      #dma-cells = <2>;
+      compatible = "fsl,imx7ulp-edma";
+      reg = <0x40080000 0x2000>,
+            <0x40210000 0x1000>;
+      dma-channels = <32>;
+      interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+                   /* last is eDMA2-ERR interrupt */
+                   <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+       clock-names = "dma", "dmamux0";
+       clocks = <&pcc2 IMX7ULP_CLK_DMA1>, <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt
deleted file mode 100644
index e77b08ebcd06..000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-edma.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-* Freescale enhanced Direct Memory Access(eDMA) Controller
-
-  The eDMA channels have multiplex capability by programmble memory-mapped
-registers. channels are split into two groups, called DMAMUX0 and DMAMUX1,
-specific DMA request source can only be multiplexed by any channel of certain
-group, DMAMUX0 or DMAMUX1, but not both.
-
-* eDMA Controller
-Required properties:
-- compatible :
-	- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
-	- "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
-	- "fsl,fsl,ls1028a-edma" for eDMA used similar to that on Vybrid vf610 SoC
-- reg : Specifies base physical address(s) and size of the eDMA registers.
-	The 1st region is eDMA control register's address and size.
-	The 2nd and the 3rd regions are programmable channel multiplexing
-	control register's address and size.
-- interrupts : A list of interrupt-specifiers, one for each entry in
-	interrupt-names on vf610 similar SoC. But for i.mx7ulp per channel
-	per transmission interrupt, total 16 channel interrupt and 1
-	error interrupt(located in the last), no interrupt-names list on
-	i.mx7ulp for clean on dts.
-- #dma-cells : Must be <2>.
-	The 1st cell specifies the DMAMUX(0 for DMAMUX0 and 1 for DMAMUX1).
-	Specific request source can only be multiplexed by specific channels
-	group called DMAMUX.
-	The 2nd cell specifies the request source(slot) ID.
-	See the SoC's reference manual for all the supported request sources.
-- dma-channels : Number of channels supported by the controller
-- clock-names : A list of channel group clock names. Should contain:
-	"dmamux0" - clock name of mux0 group
-	"dmamux1" - clock name of mux1 group
-	Note: No dmamux0 on i.mx7ulp, but another 'dma' clk added on i.mx7ulp.
-- clocks : A list of phandle and clock-specifier pairs, one for each entry in
-	clock-names.
-
-Optional properties:
-- big-endian: If present registers and hardware scatter/gather descriptors
-	of the eDMA are implemented in big endian mode, otherwise in little
-	mode.
-- interrupt-names : Should contain the below on vf610 similar SoC but not used
-	on i.mx7ulp similar SoC:
-	"edma-tx" - the transmission interrupt
-	"edma-err" - the error interrupt
-
-
-Examples:
-
-edma0: dma-controller@40018000 {
-	#dma-cells = <2>;
-	compatible = "fsl,vf610-edma";
-	reg = <0x40018000 0x2000>,
-		<0x40024000 0x1000>,
-		<0x40025000 0x1000>;
-	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
-		<0 9 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "edma-tx", "edma-err";
-	dma-channels = <32>;
-	clock-names = "dmamux0", "dmamux1";
-	clocks = <&clks VF610_CLK_DMAMUX0>,
-		<&clks VF610_CLK_DMAMUX1>;
-}; /* vf610 */
-
-edma1: dma-controller@40080000 {
-	#dma-cells = <2>;
-	compatible = "fsl,imx7ulp-edma";
-	reg = <0x40080000 0x2000>,
-		<0x40210000 0x1000>;
-	dma-channels = <32>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-		     /* last is eDMA2-ERR interrupt */
-		     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-	clock-names = "dma", "dmamux0";
-	clocks = <&pcc2 IMX7ULP_CLK_DMA1>,
-		 <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
-}; /* i.mx7ulp */
-
-* DMA clients
-DMA client drivers that uses the DMA function must use the format described
-in the dma.txt file, using a two-cell specifier for each channel: the 1st
-specifies the channel group(DMAMUX) in which this request can be multiplexed,
-and the 2nd specifies the request source.
-
-Examples:
-
-sai2: sai@40031000 {
-	compatible = "fsl,vf610-sai";
-	reg = <0x40031000 0x1000>;
-	interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-	clock-names = "sai";
-	clocks = <&clks VF610_CLK_SAI2>;
-	dma-names = "tx", "rx";
-	dmas = <&edma0 0 21>,
-		<&edma0 0 20>;
-};
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
index 7bd8847d6394..1c9929d53727 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
@@ -13,8 +13,10 @@ Required properties:
 - #dma-cells : Has to be 1. imx-dma does not support anything else.
 
 Optional properties:
-- #dma-channels : Number of DMA channels supported. Should be 16.
-- #dma-requests : Number of DMA requests supported.
+- dma-channels : Number of DMA channels supported. Should be 16.
+- #dma-channels : deprecated
+- dma-requests : Number of DMA requests supported.
+- #dma-requests : deprecated
 
 Example:
 
@@ -23,7 +25,7 @@ Example:
 		reg = <0x10001000 0x1000>;
 		interrupts = <32 33>;
 		#dma-cells = <1>;
-		#dma-channels = <16>;
+		dma-channels = <16>;
 	};
 
 
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index c9e97409e853..12c316ff4834 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -9,6 +9,7 @@ Required properties:
       "fsl,imx53-sdma"
       "fsl,imx6q-sdma"
       "fsl,imx7d-sdma"
+      "fsl,imx6ul-sdma"
       "fsl,imx8mq-sdma"
       "fsl,imx8mm-sdma"
       "fsl,imx8mn-sdma"
diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
new file mode 100644
index 000000000000..3b0b3b919af8
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ingenic,dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs DMA Controller DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-dma
+          - ingenic,jz4725b-dma
+          - ingenic,jz4760-dma
+          - ingenic,jz4760-bdma
+          - ingenic,jz4760-mdma
+          - ingenic,jz4760b-dma
+          - ingenic,jz4760b-bdma
+          - ingenic,jz4760b-mdma
+          - ingenic,jz4770-dma
+          - ingenic,jz4780-dma
+          - ingenic,x1000-dma
+          - ingenic,x1830-dma
+      - items:
+          - const: ingenic,jz4770-bdma
+          - const: ingenic,jz4760b-bdma
+
+  reg:
+    items:
+      - description: Channel-specific registers
+      - description: System control registers
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#dma-cells":
+    enum: [2, 3]
+    description: >
+      DMA clients must use the format described in dma.txt, giving a phandle
+      to the DMA controller plus the following integer cells:
+
+      - Request type: The DMA request type specifies the device endpoint that
+        will be the source or destination of the DMA transfer.
+        If "#dma-cells" is 2, the request type is a single cell, and the
+        direction will be unidirectional (either RX or TX but not both).
+        If "#dma-cells" is 3, the request type has two cells; the first
+        one corresponds to the host to device direction (TX), the second one
+        corresponds to the device to host direction (RX). The DMA channel is
+        then bidirectional.
+
+      - Channel: If set to 0xffffffff, any available channel will be allocated
+        for the client. Otherwise, the exact channel specified will be used.
+        The channel should be reserved on the DMA controller using the
+        ingenic,reserved-channels property.
+
+  ingenic,reserved-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Bitmask of channels to reserve for devices that need a specific
+      channel. These channels will only be assigned when explicitely
+      requested by a client. The primary use for this is channels 0 and
+      1, which can be configured to have special behaviour for NAND/BCH
+      when using programmable firmware.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    dma: dma-controller@13420000 {
+      compatible = "ingenic,jz4780-dma";
+      reg = <0x13420000 0x400>, <0x13421000 0x40>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <10>;
+
+      clocks = <&cgu JZ4780_CLK_PDMA>;
+
+      #dma-cells = <2>;
+
+      ingenic,reserved-channels = <0x3>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
new file mode 100644
index 000000000000..a5c4be783593
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lightning Mountain centralized DMA controllers.
+
+maintainers:
+  - chuanhua.lei@intel.com
+  - mallikarjunax.reddy@intel.com
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - intel,lgm-cdma
+      - intel,lgm-dma2tx
+      - intel,lgm-dma1rx
+      - intel,lgm-dma1tx
+      - intel,lgm-dma0tx
+      - intel,lgm-dma3
+      - intel,lgm-toe-dma30
+      - intel,lgm-toe-dma31
+
+  reg:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 3
+    description:
+      The first cell is the peripheral's DMA request line.
+      The second cell is the peripheral's (port) number corresponding to the channel.
+      The third cell is the burst length of the channel.
+
+  dma-channels:
+    minimum: 1
+    maximum: 16
+
+  dma-channel-mask:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: ctrl
+
+  interrupts:
+    maxItems: 1
+
+  intel,dma-poll-cnt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DMA descriptor polling counter is used to control the poling mechanism
+      for the descriptor fetching for all channels.
+
+  intel,dma-byte-en:
+    type: boolean
+    description:
+      DMA byte enable is only valid for DMA write(RX).
+      Byte enable(1) means DMA write will be based on the number of dwords
+      instead of the whole burst.
+
+  intel,dma-drb:
+    type: boolean
+    description:
+      DMA descriptor read back to make sure data and desc synchronization.
+
+  intel,dma-dburst-wr:
+    type: boolean
+    description:
+      Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst;
+      if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16.
+      It only applies to RX DMA and memcopy DMA.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dma0: dma-controller@e0e00000 {
+      compatible = "intel,lgm-cdma";
+      reg = <0xe0e00000 0x1000>;
+      #dma-cells = <3>;
+      dma-channels = <16>;
+      dma-channel-mask = <0xFFFF>;
+      interrupt-parent = <&ioapic1>;
+      interrupts = <82 1>;
+      resets = <&rcu0 0x30 0>;
+      reset-names = "ctrl";
+      clocks = <&cgu0 80>;
+      intel,dma-poll-cnt = <4>;
+      intel,dma-byte-en;
+      intel,dma-drb;
+    };
+  - |
+    dma3: dma-controller@ec800000 {
+      compatible = "intel,lgm-dma3";
+      reg = <0xec800000 0x1000>;
+      clocks = <&cgu0 71>;
+      resets = <&rcu0 0x10 9>;
+      #dma-cells = <3>;
+      intel,dma-poll-cnt = <16>;
+      intel,dma-byte-en;
+      intel,dma-dburst-wr;
+    };
diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
deleted file mode 100644
index 3459e77be294..000000000000
--- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Ingenic XBurst DMA Controller
-
-Required properties:
-
-- compatible: Should be one of:
-  * ingenic,jz4740-dma
-  * ingenic,jz4725b-dma
-  * ingenic,jz4770-dma
-  * ingenic,jz4780-dma
-  * ingenic,x1000-dma
-  * ingenic,x1830-dma
-- reg: Should contain the DMA channel registers location and length, followed
-  by the DMA controller registers location and length.
-- interrupts: Should contain the interrupt specifier of the DMA controller.
-- clocks: Should contain a clock specifier for the JZ4780/X1000/X1830 PDMA
-  clock.
-- #dma-cells: Must be <2>. Number of integer cells in the dmas property of
-  DMA clients (see below).
-
-Optional properties:
-
-- ingenic,reserved-channels: Bitmask of channels to reserve for devices that
-  need a specific channel. These channels will only be assigned when explicitly
-  requested by a client. The primary use for this is channels 0 and 1, which
-  can be configured to have special behaviour for NAND/BCH when using
-  programmable firmware.
-
-Example:
-
-dma: dma-controller@13420000 {
-	compatible = "ingenic,jz4780-dma";
-	reg = <0x13420000 0x400
-	       0x13421000 0x40>;
-
-	interrupt-parent = <&intc>;
-	interrupts = <10>;
-
-	clocks = <&cgu JZ4780_CLK_PDMA>;
-
-	#dma-cells = <2>;
-
-	ingenic,reserved-channels = <0x3>;
-};
-
-DMA clients must use the format described in dma.txt, giving a phandle to the
-DMA controller plus the following 2 integer cells:
-
-1. Request type: The DMA request type for transfers to/from the device on
-   the allocated channel, as defined in the SoC documentation.
-
-2. Channel: If set to 0xffffffff, any available channel will be allocated for
-   the client. Otherwise, the exact channel specified will be used. The channel
-   should be reserved on the DMA controller using the ingenic,reserved-channels
-   property.
-
-Example:
-
-uart0: serial@10030000 {
-	...
-	dmas = <&dma 0x14 0xffffffff
-		&dma 0x15 0xffffffff>;
-	dma-names = "tx", "rx";
-	...
-};
diff --git a/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
new file mode 100644
index 000000000000..9ab4d81ead35
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/mediatek,uart-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek UART APDMA controller
+
+maintainers:
+  - Long Cheng <long.cheng@mediatek.com>
+
+description: |
+  The MediaTek UART APDMA controller provides DMA capabilities
+  for the UART peripheral bus.
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2712-uart-dma
+              - mediatek,mt6795-uart-dma
+              - mediatek,mt8365-uart-dma
+              - mediatek,mt8516-uart-dma
+          - const: mediatek,mt6577-uart-dma
+      - enum:
+          - mediatek,mt6577-uart-dma
+
+  reg:
+    minItems: 1
+    maxItems: 16
+
+  interrupts:
+    description: |
+      TX, RX interrupt lines for each UART APDMA channel
+    minItems: 1
+    maxItems: 16
+
+  clocks:
+    description: Must contain one entry for the APDMA main clock
+    maxItems: 1
+
+  clock-names:
+    const: apdma
+
+  "#dma-cells":
+    const: 1
+    description: |
+      The first cell specifies the UART APDMA channel number
+
+  dma-requests:
+    description: |
+      Number of virtual channels of the UART APDMA controller
+    maximum: 16
+
+  mediatek,dma-33bits:
+    type: boolean
+    description: Enable 33-bits UART APDMA support
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+if:
+  not:
+    required:
+      - dma-requests
+then:
+  properties:
+    interrupts:
+      maxItems: 8
+    reg:
+      maxItems: 8
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt2712-clk.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        apdma: dma-controller@11000400 {
+            compatible = "mediatek,mt2712-uart-dma",
+                         "mediatek,mt6577-uart-dma";
+            reg = <0 0x11000400 0 0x80>,
+                  <0 0x11000480 0 0x80>,
+                  <0 0x11000500 0 0x80>,
+                  <0 0x11000580 0 0x80>,
+                  <0 0x11000600 0 0x80>,
+                  <0 0x11000680 0 0x80>,
+                  <0 0x11000700 0 0x80>,
+                  <0 0x11000780 0 0x80>,
+                  <0 0x11000800 0 0x80>,
+                  <0 0x11000880 0 0x80>,
+                  <0 0x11000900 0 0x80>,
+                  <0 0x11000980 0 0x80>;
+            interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+            dma-requests = <12>;
+            clocks = <&pericfg CLK_PERI_AP_DMA>;
+            clock-names = "apdma";
+            mediatek,dma-33bits;
+            #dma-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt
index 8f7364a7b349..ec18bf0a802a 100644
--- a/Documentation/devicetree/bindings/dma/mmp-dma.txt
+++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt
@@ -10,10 +10,12 @@ Required properties:
 		or one irq for pdma device
 
 Optional properties:
-- #dma-channels: Number of DMA channels supported by the controller (defaults
+- dma-channels: Number of DMA channels supported by the controller (defaults
   to 32 when not specified)
-- #dma-requests: Number of DMA requestor lines supported by the controller
+- #dma-channels: deprecated
+- dma-requests: Number of DMA requestor lines supported by the controller
   (defaults to 32 when not specified)
+- #dma-requests: deprecated
 
 "marvell,pdma-1.0"
 Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
@@ -33,7 +35,7 @@ pdma: dma-controller@d4000000 {
 	      reg = <0xd4000000 0x10000>;
 	      interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
 	      interrupt-parent = <&intcmux32>;
-	      #dma-channels = <16>;
+	      dma-channels = <16>;
       };
 
 /*
@@ -45,7 +47,7 @@ pdma: dma-controller@d4000000 {
 	      compatible = "marvell,pdma-1.0";
 	      reg = <0xd4000000 0x10000>;
 	      interrupts = <47>;
-	      #dma-channels = <16>;
+	      dma-channels = <16>;
       };
 
 
diff --git a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
index 8a9f3559335b..7e14e26676ec 100644
--- a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
+++ b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
diff --git a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
deleted file mode 100644
index 5d6f98c43e3d..000000000000
--- a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Mediatek UART APDMA Controller
-
-Required properties:
-- compatible should contain:
-  * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA
-  * "mediatek,mt6577-uart-dma" for MT6577 and all of the above
-
-- reg: The base address of the APDMA register bank.
-
-- interrupts: A single interrupt specifier.
- One interrupt per dma-requests, or 8 if no dma-requests property is present
-
-- dma-requests: The number of DMA channels
-
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: The APDMA clock for register accesses
-
-- mediatek,dma-33bits: Present if the DMA requires support
-
-Examples:
-
-	apdma: dma-controller@11000400 {
-		compatible = "mediatek,mt2712-uart-dma";
-		reg = <0 0x11000400 0 0x80>,
-		      <0 0x11000480 0 0x80>,
-		      <0 0x11000500 0 0x80>,
-		      <0 0x11000580 0 0x80>,
-		      <0 0x11000600 0 0x80>,
-		      <0 0x11000680 0 0x80>,
-		      <0 0x11000700 0 0x80>,
-		      <0 0x11000780 0 0x80>,
-		      <0 0x11000800 0 0x80>,
-		      <0 0x11000880 0 0x80>,
-		      <0 0x11000900 0 0x80>,
-		      <0 0x11000980 0 0x80>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
-		dma-requests = <12>;
-		clocks = <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "apdma";
-		mediatek,dma-33bits;
-		#dma-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
new file mode 100644
index 000000000000..c8894476b6ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nvidia,tegra186-gpc-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPC DMA Controller
+
+description: |
+  The Tegra General Purpose Central (GPC) DMA controller is used for faster
+  data transfers between memory to memory, memory to device and device to
+  memory.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Rajesh Gumasta <rgumasta@nvidia.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-gpcdma
+      - items:
+          - enum:
+              - nvidia,tegra234-gpcdma
+              - nvidia,tegra194-gpcdma
+          - const: nvidia,tegra186-gpcdma
+
+  "#dma-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Should contain all of the per-channel DMA interrupts in
+      ascending order with respect to the DMA channel index.
+    minItems: 1
+    maxItems: 31
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: gpcdma
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - reset-names
+  - "#dma-cells"
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    dma-controller@2600000 {
+        compatible = "nvidia,tegra186-gpcdma";
+        reg = <0x2600000 0x210000>;
+        resets = <&bpmp TEGRA186_RESET_GPCDMA>;
+        reset-names = "gpcdma";
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <1>;
+        iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
+        dma-coherent;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
deleted file mode 100644
index 245d3063715c..000000000000
--- a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* NVIDIA Tegra Audio DMA (ADMA) controller
-
-The Tegra Audio DMA controller that is used for transferring data
-between system memory and the Audio Processing Engine (APE).
-
-Required properties:
-- compatible: Should contain one of the following:
-  - "nvidia,tegra210-adma": for Tegra210
-  - "nvidia,tegra186-adma": for Tegra186 and Tegra194
-- reg: Should contain DMA registers location and length. This should be
-  a single entry that includes all of the per-channel registers in one
-  contiguous bank.
-- interrupts: Should contain all of the per-channel DMA interrupts in
-  ascending order with respect to the DMA channel index.
-- clocks: Must contain one entry for the ADMA module clock
-  (TEGRA210_CLK_D_AUDIO).
-- clock-names: Must contain the name "d_audio" for the corresponding
-  'clocks' entry.
-- #dma-cells : Must be 1. The first cell denotes the receive/transmit
-  request number and should be between 1 and the maximum number of
-  requests supported. This value corresponds to the RX/TX_REQUEST_SELECT
-  fields in the ADMA_CHn_CTRL register.
-
-
-Example:
-
-adma: dma@702e2000 {
-	compatible = "nvidia,tegra210-adma";
-	reg = <0x0 0x702e2000 0x0 0x2000>;
-	interrupt-parent = <&tegra_agic>;
-	interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
-	clock-names = "d_audio";
-	#dma-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
new file mode 100644
index 000000000000..fef804565b88
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nvidia,tegra210-adma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Audio DMA (ADMA) controller
+
+description: |
+  The Tegra Audio DMA controller is used for transferring data
+  between system memory and the Audio Processing Engine (APE).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra210-adma
+          - nvidia,tegra186-adma
+      - items:
+          - enum:
+              - nvidia,tegra234-adma
+              - nvidia,tegra194-adma
+          - const: nvidia,tegra186-adma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      Should contain all of the per-channel DMA interrupts in
+      ascending order with respect to the DMA channel index.
+    minItems: 1
+    maxItems: 32
+
+  clocks:
+    description: Must contain one entry for the ADMA module clock
+    maxItems: 1
+
+  clock-names:
+    const: d_audio
+
+  "#dma-cells":
+    description: |
+      The first cell denotes the receive/transmit request number and
+      should be between 1 and the maximum number of requests supported.
+      This value corresponds to the RX/TX_REQUEST_SELECT fields in the
+      ADMA_CHn_CTRL register.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include<dt-bindings/clock/tegra210-car.h>
+
+    dma-controller@702e2000 {
+        compatible = "nvidia,tegra210-adma";
+        reg = <0x702e2000 0x2000>;
+        interrupt-parent = <&tegra_agic>;
+        interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+        clock-names = "d_audio";
+        #dma-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/owl-dma.txt b/Documentation/devicetree/bindings/dma/owl-dma.txt
deleted file mode 100644
index 03e9bb12b75f..000000000000
--- a/Documentation/devicetree/bindings/dma/owl-dma.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* Actions Semi Owl SoCs DMA controller
-
-This binding follows the generic DMA bindings defined in dma.txt.
-
-Required properties:
-- compatible: Should be "actions,s900-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain 4 interrupts shared by all channel.
-- #dma-cells: Must be <1>. Used to represent the number of integer
-              cells in the dmas property of client device.
-- dma-channels: Physical channels supported.
-- dma-requests: Number of DMA request signals supported by the controller.
-                Refer to Documentation/devicetree/bindings/dma/dma.txt
-- clocks: Phandle and Specifier of the clock feeding the DMA controller.
-
-Example:
-
-Controller:
-                dma: dma-controller@e0260000 {
-                        compatible = "actions,s900-dma";
-                        reg = <0x0 0xe0260000 0x0 0x1000>;
-                        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-                                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-                                     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-                                     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-                        #dma-cells = <1>;
-                        dma-channels = <12>;
-                        dma-requests = <46>;
-                        clocks = <&clock CLK_DMAC>;
-                };
-
-Client:
-
-DMA clients connected to the Actions Semi Owl SoCs DMA controller must
-use the format described in the dma.txt file, using a two-cell specifier
-for each channel.
-
-The two cells in order are:
-1. A phandle pointing to the DMA controller.
-2. The channel id.
-
-uart5: serial@e012a000 {
-        ...
-        dma-names = "tx", "rx";
-        dmas = <&dma 26>, <&dma 27>;
-        ...
-};
diff --git a/Documentation/devicetree/bindings/dma/owl-dma.yaml b/Documentation/devicetree/bindings/dma/owl-dma.yaml
new file mode 100644
index 000000000000..93b4847554fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/owl-dma.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/owl-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs DMA controller
+
+description: |
+  The OWL DMA is a general-purpose direct memory access controller capable of
+  supporting 10 independent DMA channels for the Actions Semi S700 SoC and 12
+  independent DMA channels for the S500 and S900 SoC variants.
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - actions,s500-dma
+      - actions,s700-dma
+      - actions,s900-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      controller supports 4 interrupts, which are freely assignable to the
+      DMA channels.
+    maxItems: 4
+
+  "#dma-cells":
+    const: 1
+
+  dma-channels:
+    maximum: 12
+
+  dma-requests:
+    maximum: 46
+
+  clocks:
+    maxItems: 1
+    description:
+      Phandle and Specifier of the clock feeding the DMA controller.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - dma-channels
+  - dma-requests
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    dma: dma-controller@e0260000 {
+        compatible = "actions,s900-dma";
+        reg = <0xe0260000 0x1000>;
+        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <1>;
+        dma-channels = <12>;
+        dma-requests = <46>;
+        clocks = <&clock 22>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,adm.yaml b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
new file mode 100644
index 000000000000..6a9d7bc74aff
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,adm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ADM DMA Controller
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  QCOM ADM DMA controller provides DMA capabilities for
+  peripheral buses such as NAND and SPI.
+
+properties:
+  compatible:
+    const: qcom,adm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: phandle to the core clock
+      - description: phandle to the iface clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  resets:
+    items:
+      - description: phandle to the clk reset
+      - description: phandle to the pbus reset
+      - description: phandle to the c0 reset
+      - description: phandle to the c1 reset
+      - description: phandle to the c2 reset
+
+  reset-names:
+    items:
+      - const: clk
+      - const: pbus
+      - const: c0
+      - const: c1
+      - const: c2
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: indicates the security domain identifier used in the secure world.
+    minimum: 0
+    maximum: 255
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - qcom,ee
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+
+    adm_dma: dma-controller@18300000 {
+        compatible = "qcom,adm";
+        reg = <0x18300000 0x100000>;
+        interrupts = <0 170 0>;
+        #dma-cells = <1>;
+
+        clocks = <&gcc ADM0_CLK>,
+                  <&gcc ADM0_PBUS_CLK>;
+        clock-names = "core", "iface";
+
+        resets = <&gcc ADM0_RESET>,
+                  <&gcc ADM0_PBUS_RESET>,
+                  <&gcc ADM0_C0_RESET>,
+                  <&gcc ADM0_C1_RESET>,
+                  <&gcc ADM0_C2_RESET>;
+        reset-names = "clk", "pbus", "c0", "c1", "c2";
+        qcom,ee = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
new file mode 100644
index 000000000000..003098caf709
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,bam-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc BAM DMA controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <andersson@kernel.org>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+        # APQ8064, IPQ8064 and MSM8960
+      - qcom,bam-v1.3.0
+        # MSM8974, APQ8074 and APQ8084
+      - qcom,bam-v1.4.0
+        # MSM8916 and SDM845
+      - qcom,bam-v1.7.0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: bam_clk
+
+  "#dma-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 4
+
+  num-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Indicates supported number of DMA channels in a remotely controlled bam.
+
+  qcom,controlled-remotely:
+    type: boolean
+    description:
+      Indicates that the bam is controlled by remote proccessor i.e. execution
+      environment.
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description:
+      Indicates the active Execution Environment identifier (0-7) used in the
+      secure world.
+
+  qcom,num-ees:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Indicates supported number of Execution Environments in a remotely
+      controlled bam.
+
+  qcom,powered-remotely:
+    type: boolean
+    description:
+      Indicates that the bam is powered up by a remote processor but must be
+      initialized by the local processor.
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#dma-cells"
+  - interrupts
+  - qcom,ee
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+
+    dma-controller@f9944000 {
+        compatible = "qcom,bam-v1.4.0";
+        reg = <0xf9944000 0x19000>;
+        interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+        clock-names = "bam_clk";
+        #dma-cells = <1>;
+        qcom,ee = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
new file mode 100644
index 000000000000..eabf8a76d3a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,gpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc GPI DMA controller
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  QCOM GPI DMA controller provides DMA capabilities for
+  peripheral buses such as I2C, UART, and SPI.
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-gpi-dma
+      - qcom,sdm845-gpi-dma
+      - qcom,sm6350-gpi-dma
+      - qcom,sm8150-gpi-dma
+      - qcom,sm8250-gpi-dma
+      - qcom,sm8350-gpi-dma
+      - qcom,sm8450-gpi-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt lines for each GPI instance
+    minItems: 1
+    maxItems: 13
+
+  "#dma-cells":
+    const: 3
+    description: >
+      DMA clients must use the format described in dma.txt, giving a phandle
+      to the DMA controller plus the following 3 integer cells:
+      - channel: if set to 0xffffffff, any available channel will be allocated
+        for the client. Otherwise, the exact channel specified will be used.
+      - seid: serial id of the client as defined in the SoC documentation.
+      - client: type of the client as defined in dt-bindings/dma/qcom-gpi.h
+
+  iommus:
+    maxItems: 1
+
+  dma-channels:
+    maximum: 31
+
+  dma-channel-mask:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - iommus
+  - dma-channels
+  - dma-channel-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/dma/qcom-gpi.h>
+    gpi_dma0: dma-controller@800000 {
+        compatible = "qcom,sdm845-gpi-dma";
+        #dma-cells = <3>;
+        reg = <0x00800000 0x60000>;
+        iommus = <&apps_smmu 0x0016 0x0>;
+        dma-channels = <13>;
+        dma-channel-mask = <0xfa>;
+        interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt
deleted file mode 100644
index 9d3b2f917b7b..000000000000
--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-QCOM ADM DMA Controller
-
-Required properties:
-- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
-- reg: Address range for DMA registers
-- interrupts: Should contain one interrupt shared by all channels
-- #dma-cells: must be <2>.  First cell denotes the channel number.  Second cell
-  denotes CRCI (client rate control interface) flow control assignment.
-- clocks: Should contain the core clock and interface clock.
-- clock-names: Must contain "core" for the core clock and "iface" for the
-  interface clock.
-- resets: Must contain an entry for each entry in reset names.
-- reset-names: Must include the following entries:
-  - clk
-  - c0
-  - c1
-  - c2
-- qcom,ee: indicates the security domain identifier used in the secure world.
-
-Example:
-		adm_dma: dma@18300000 {
-			compatible = "qcom,adm";
-			reg = <0x18300000 0x100000>;
-			interrupts = <0 170 0>;
-			#dma-cells = <2>;
-
-			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-			clock-names = "core", "iface";
-
-			resets = <&gcc ADM0_RESET>,
-				<&gcc ADM0_C0_RESET>,
-				<&gcc ADM0_C1_RESET>,
-				<&gcc ADM0_C2_RESET>;
-			reset-names = "clk", "c0", "c1", "c2";
-			qcom,ee = <0>;
-		};
-
-DMA clients must use the format descripted in the dma.txt file, using a three
-cell specifier for each channel.
-
-Each dmas request consists of 3 cells:
- 1. phandle pointing to the DMA controller
- 2. channel number
- 3. CRCI assignment, if applicable.  If no CRCI flow control is required, use 0.
-    The CRCI is used for flow control.  It identifies the peripheral device that
-    is the source/destination for the transferred data.
-
-Example:
-
-	spi4: spi@1a280000 {
-		spi-max-frequency = <50000000>;
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 0>;
-
-		dmas = <&adm_dma 6 9>,
-			<&adm_dma 5 10>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
deleted file mode 100644
index cf5b9e44432c..000000000000
--- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-QCOM BAM DMA controller
-
-Required properties:
-- compatible: must be one of the following:
- * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
- * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
- * "qcom,bam-v1.7.0" for MSM8916
-- reg: Address range for DMA registers
-- interrupts: Should contain the one interrupt shared by all channels
-- #dma-cells: must be <1>, the cell in the dmas property of the client device
-  represents the channel number
-- clocks: required clock
-- clock-names: must contain "bam_clk" entry
-- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
-  the secure world.
-- qcom,controlled-remotely : optional, indicates that the bam is controlled by
-  remote proccessor i.e. execution environment.
-- num-channels : optional, indicates supported number of DMA channels in a
-  remotely controlled bam.
-- qcom,num-ees : optional, indicates supported number of Execution Environments
-  in a remotely controlled bam.
-
-Example:
-
-	uart-bam: dma@f9984000 = {
-		compatible = "qcom,bam-v1.4.0";
-		reg = <0xf9984000 0x15000>;
-		interrupts = <0 94 0>;
-		clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
-		clock-names = "bam_clk";
-		#dma-cells = <1>;
-		qcom,ee = <0>;
-	};
-
-DMA clients must use the format described in the dma.txt file, using a two cell
-specifier for each channel.
-
-Example:
-	serial@f991e000 {
-		compatible = "qcom,msm-uart";
-		reg = <0xf991e000 0x1000>
-			<0xf9944000 0x19000>;
-		interrupts = <0 108 0>;
-		clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
-			<&gcc GCC_BLSP1_AHB_CLK>;
-		clock-names = "core", "iface";
-
-		dmas = <&uart-bam 0>, <&uart-bam 1>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
deleted file mode 100644
index b7f81c63be8b..000000000000
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
+++ /dev/null
@@ -1,117 +0,0 @@
-* Renesas R-Car (RZ/G) DMA Controller Device Tree bindings
-
-Renesas R-Car (Gen 2/3) and RZ/G SoCs have multiple multi-channel DMA
-controller instances named DMAC capable of serving multiple clients. Channels
-can be dedicated to specific clients or shared between a large number of
-clients.
-
-Each DMA client is connected to one dedicated port of the DMAC, identified by
-an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
-256 clients in total. When the number of hardware channels is lower than the
-number of clients to be served, channels must be shared between multiple DMA
-clients. The association of DMA clients to DMAC channels is fully dynamic and
-not described in these device tree bindings.
-
-Required Properties:
-
-- compatible: "renesas,dmac-<soctype>", "renesas,rcar-dmac" as fallback.
-	      Examples with soctypes are:
-		- "renesas,dmac-r8a7743" (RZ/G1M)
-		- "renesas,dmac-r8a7744" (RZ/G1N)
-		- "renesas,dmac-r8a7745" (RZ/G1E)
-		- "renesas,dmac-r8a77470" (RZ/G1C)
-		- "renesas,dmac-r8a774a1" (RZ/G2M)
-		- "renesas,dmac-r8a774b1" (RZ/G2N)
-		- "renesas,dmac-r8a774c0" (RZ/G2E)
-		- "renesas,dmac-r8a7790" (R-Car H2)
-		- "renesas,dmac-r8a7791" (R-Car M2-W)
-		- "renesas,dmac-r8a7792" (R-Car V2H)
-		- "renesas,dmac-r8a7793" (R-Car M2-N)
-		- "renesas,dmac-r8a7794" (R-Car E2)
-		- "renesas,dmac-r8a7795" (R-Car H3)
-		- "renesas,dmac-r8a7796" (R-Car M3-W)
-		- "renesas,dmac-r8a77961" (R-Car M3-W+)
-		- "renesas,dmac-r8a77965" (R-Car M3-N)
-		- "renesas,dmac-r8a77970" (R-Car V3M)
-		- "renesas,dmac-r8a77980" (R-Car V3H)
-		- "renesas,dmac-r8a77990" (R-Car E3)
-		- "renesas,dmac-r8a77995" (R-Car D3)
-
-- reg: base address and length of the registers block for the DMAC
-
-- interrupts: interrupt specifiers for the DMAC, one for each entry in
-  interrupt-names.
-- interrupt-names: one entry for the error interrupt, named "error", plus one
-  entry per channel, named "ch%u", where %u is the channel number ranging from
-  zero to the number of channels minus one.
-
-- clock-names: "fck" for the functional clock
-- clocks: a list of phandle + clock-specifier pairs, one for each entry
-  in clock-names.
-- clock-names: must contain "fck" for the functional clock.
-
-- #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port
-  connected to the DMA client
-- dma-channels: number of DMA channels
-
-Example: R8A7790 (R-Car H2) SYS-DMACs
-
-	dmac0: dma-controller@e6700000 {
-		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
-		reg = <0 0xe6700000 0 0x20000>;
-		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
-			      0 200 IRQ_TYPE_LEVEL_HIGH
-			      0 201 IRQ_TYPE_LEVEL_HIGH
-			      0 202 IRQ_TYPE_LEVEL_HIGH
-			      0 203 IRQ_TYPE_LEVEL_HIGH
-			      0 204 IRQ_TYPE_LEVEL_HIGH
-			      0 205 IRQ_TYPE_LEVEL_HIGH
-			      0 206 IRQ_TYPE_LEVEL_HIGH
-			      0 207 IRQ_TYPE_LEVEL_HIGH
-			      0 208 IRQ_TYPE_LEVEL_HIGH
-			      0 209 IRQ_TYPE_LEVEL_HIGH
-			      0 210 IRQ_TYPE_LEVEL_HIGH
-			      0 211 IRQ_TYPE_LEVEL_HIGH
-			      0 212 IRQ_TYPE_LEVEL_HIGH
-			      0 213 IRQ_TYPE_LEVEL_HIGH
-			      0 214 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error",
-				"ch0", "ch1", "ch2", "ch3",
-				"ch4", "ch5", "ch6", "ch7",
-				"ch8", "ch9", "ch10", "ch11",
-				"ch12", "ch13", "ch14";
-		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
-		clock-names = "fck";
-		#dma-cells = <1>;
-		dma-channels = <15>;
-	};
-
-	dmac1: dma-controller@e6720000 {
-		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
-		reg = <0 0xe6720000 0 0x20000>;
-		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
-			      0 216 IRQ_TYPE_LEVEL_HIGH
-			      0 217 IRQ_TYPE_LEVEL_HIGH
-			      0 218 IRQ_TYPE_LEVEL_HIGH
-			      0 219 IRQ_TYPE_LEVEL_HIGH
-			      0 308 IRQ_TYPE_LEVEL_HIGH
-			      0 309 IRQ_TYPE_LEVEL_HIGH
-			      0 310 IRQ_TYPE_LEVEL_HIGH
-			      0 311 IRQ_TYPE_LEVEL_HIGH
-			      0 312 IRQ_TYPE_LEVEL_HIGH
-			      0 313 IRQ_TYPE_LEVEL_HIGH
-			      0 314 IRQ_TYPE_LEVEL_HIGH
-			      0 315 IRQ_TYPE_LEVEL_HIGH
-			      0 316 IRQ_TYPE_LEVEL_HIGH
-			      0 317 IRQ_TYPE_LEVEL_HIGH
-			      0 318 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error",
-				"ch0", "ch1", "ch2", "ch3",
-				"ch4", "ch5", "ch6", "ch7",
-				"ch8", "ch9", "ch10", "ch11",
-				"ch12", "ch13", "ch14";
-		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
-		clock-names = "fck";
-		#dma-cells = <1>;
-		dma-channels = <15>;
-	};
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
new file mode 100644
index 000000000000..89b591a05bce
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rcar-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car and RZ/G DMA Controller
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,dmac-r8a7742  # RZ/G1H
+              - renesas,dmac-r8a7743  # RZ/G1M
+              - renesas,dmac-r8a7744  # RZ/G1N
+              - renesas,dmac-r8a7745  # RZ/G1E
+              - renesas,dmac-r8a77470 # RZ/G1C
+              - renesas,dmac-r8a774a1 # RZ/G2M
+              - renesas,dmac-r8a774b1 # RZ/G2N
+              - renesas,dmac-r8a774c0 # RZ/G2E
+              - renesas,dmac-r8a774e1 # RZ/G2H
+              - renesas,dmac-r8a7790  # R-Car H2
+              - renesas,dmac-r8a7791  # R-Car M2-W
+              - renesas,dmac-r8a7792  # R-Car V2H
+              - renesas,dmac-r8a7793  # R-Car M2-N
+              - renesas,dmac-r8a7794  # R-Car E2
+              - renesas,dmac-r8a7795  # R-Car H3
+              - renesas,dmac-r8a7796  # R-Car M3-W
+              - renesas,dmac-r8a77961 # R-Car M3-W+
+              - renesas,dmac-r8a77965 # R-Car M3-N
+              - renesas,dmac-r8a77970 # R-Car V3M
+              - renesas,dmac-r8a77980 # R-Car V3H
+              - renesas,dmac-r8a77990 # R-Car E3
+              - renesas,dmac-r8a77995 # R-Car D3
+          - const: renesas,rcar-dmac
+
+      - items:
+          - enum:
+              - renesas,dmac-r8a779a0     # R-Car V3U
+              - renesas,dmac-r8a779f0     # R-Car S4-8
+              - renesas,dmac-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-dmac # R-Car Gen4
+
+  reg: true
+
+  interrupts:
+    minItems: 9
+    maxItems: 17
+
+  interrupt-names:
+    minItems: 9
+    items:
+      - const: error
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+
+  '#dma-cells':
+    const: 1
+    description:
+      The cell specifies the MID/RID of the DMAC port connected to
+      the DMA client.
+
+  dma-channels:
+    minimum: 8
+    maximum: 16
+
+  dma-channel-mask: true
+
+  iommus:
+    minItems: 8
+    maxItems: 16
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - '#dma-cells'
+  - dma-channels
+  - power-domains
+  - resets
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen4-dmac
+then:
+  properties:
+    reg:
+      items:
+        - description: Base register block
+        - description: Channel register block
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    dmac0: dma-controller@e6700000 {
+        compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
+        reg = <0xe6700000 0x20000>;
+        interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "error",
+                          "ch0", "ch1", "ch2", "ch3",
+                          "ch4", "ch5", "ch6", "ch7",
+                          "ch8", "ch9", "ch10", "ch11",
+                          "ch12", "ch13", "ch14";
+        clocks = <&cpg CPG_MOD 219>;
+        clock-names = "fck";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 219>;
+        #dma-cells = <1>;
+        dma-channels = <15>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
new file mode 100644
index 000000000000..1e25c5b0fb4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rz-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,G2UL,V2L} DMA Controller
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g043-dmac # RZ/G2UL
+          - renesas,r9a07g044-dmac # RZ/G2{L,LC}
+          - renesas,r9a07g054-dmac # RZ/V2L
+      - const: renesas,rz-dmac
+
+  reg:
+    items:
+      - description: Control and channel register block
+      - description: DMA extended resource selector block
+
+  interrupts:
+    maxItems: 17
+
+  interrupt-names:
+    items:
+      - const: error
+      - const: ch0
+      - const: ch1
+      - const: ch2
+      - const: ch3
+      - const: ch4
+      - const: ch5
+      - const: ch6
+      - const: ch7
+      - const: ch8
+      - const: ch9
+      - const: ch10
+      - const: ch11
+      - const: ch12
+      - const: ch13
+      - const: ch14
+      - const: ch15
+
+  clocks:
+    items:
+      - description: DMA main clock
+      - description: DMA register access clock
+
+  '#dma-cells':
+    const: 1
+    description:
+      The cell specifies the encoded MID/RID values of the DMAC port
+      connected to the DMA client and the slave channel configuration
+      parameters.
+      bits[0:9] - Specifies MID/RID value
+      bit[10] - Specifies DMA request high enable (HIEN)
+      bit[11] - Specifies DMA request detection type (LVL)
+      bits[12:14] - Specifies DMAACK output mode (AM)
+      bit[15] - Specifies Transfer Mode (TM)
+
+  dma-channels:
+    const: 16
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: Reset for DMA ARESETN reset terminal
+      - description: Reset for DMA RST_ASYNC reset terminal
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - '#dma-cells'
+  - dma-channels
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    dmac: dma-controller@11820000 {
+        compatible = "renesas,r9a07g044-dmac",
+                     "renesas,rz-dmac";
+        reg = <0x11820000 0x10000>,
+              <0x11830000 0x10000>;
+        interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "error",
+                          "ch0", "ch1", "ch2", "ch3",
+                          "ch4", "ch5", "ch6", "ch7",
+                          "ch8", "ch9", "ch10", "ch11",
+                          "ch12", "ch13", "ch14", "ch15";
+        clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_DMAC_ARESETN>,
+                 <&cpg R9A07G044_DMAC_RST_ASYNC>;
+        #dma-cells = <1>;
+        dma-channels = <16>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
new file mode 100644
index 000000000000..d83013b0dd74
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rzn1-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 DMA mux
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: "dma-router.yaml#"
+
+properties:
+  compatible:
+    const: renesas,rzn1-dmamux
+
+  reg:
+    maxItems: 1
+    description: DMA mux first register offset within the system control parent.
+
+  '#dma-cells':
+    const: 6
+    description:
+      The first four cells are dedicated to the master DMA controller. The fifth
+      cell gives the DMA mux bit index that must be set starting from 0. The
+      sixth cell gives the binary value that must be written there, ie. 0 or 1.
+
+  dma-masters:
+    minItems: 1
+    maxItems: 2
+
+  dma-requests:
+    const: 32
+
+required:
+  - reg
+  - dma-requests
+
+additionalProperties: false
+
+examples:
+  - |
+    dma-router@a0 {
+      compatible = "renesas,rzn1-dmamux";
+      reg = <0xa0 4>;
+      #dma-cells = <6>;
+      dma-masters = <&dma0 &dma1>;
+      dma-requests = <32>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/renesas,shdma.txt b/Documentation/devicetree/bindings/dma/renesas,shdma.txt
deleted file mode 100644
index a91920a49433..000000000000
--- a/Documentation/devicetree/bindings/dma/renesas,shdma.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-* SHDMA Device Tree bindings
-
-Sh-/r-mobile and R-Car systems often have multiple identical DMA controller
-instances, capable of serving any of a common set of DMA slave devices, using
-the same configuration. To describe this topology we require all compatible
-SHDMA DT nodes to be placed under a DMA multiplexer node. All such compatible
-DMAC instances have the same number of channels and use the same DMA
-descriptors. Therefore respective DMA DT bindings can also all be placed in the
-multiplexer node. Even if there is only one such DMAC instance on a system, it
-still has to be placed under such a multiplexer node.
-
-* DMA multiplexer
-
-Required properties:
-- compatible:	should be "renesas,shdma-mux"
-- #dma-cells:	should be <1>, see "dmas" property below
-
-Optional properties (currently unused):
-- dma-channels:	number of DMA channels
-- dma-requests:	number of DMA request signals
-
-* DMA controller
-
-Required properties:
-- compatible:	should be of the form "renesas,shdma-<soc>", where <soc> should
-		be replaced with the desired SoC model, e.g.
-		"renesas,shdma-r8a73a4" for the system DMAC on r8a73a4 SoC
-
-Example:
-	dmac: dma-multiplexer@0 {
-		compatible = "renesas,shdma-mux";
-		#dma-cells = <1>;
-		dma-channels = <20>;
-		dma-requests = <256>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		dma0: dma-controller@e6700020 {
-			compatible = "renesas,shdma-r8a73a4";
-			reg = <0 0xe6700020 0 0x89e0>;
-			interrupt-parent = <&gic>;
-			interrupts = <0 220 4
-					0 200 4
-					0 201 4
-					0 202 4
-					0 203 4
-					0 204 4
-					0 205 4
-					0 206 4
-					0 207 4
-					0 208 4
-					0 209 4
-					0 210 4
-					0 211 4
-					0 212 4
-					0 213 4
-					0 214 4
-					0 215 4
-					0 216 4
-					0 217 4
-					0 218 4
-					0 219 4>;
-			interrupt-names = "error",
-					"ch0", "ch1", "ch2", "ch3",
-					"ch4", "ch5", "ch6", "ch7",
-					"ch8", "ch9", "ch10", "ch11",
-					"ch12", "ch13", "ch14", "ch15",
-					"ch16", "ch17", "ch18", "ch19";
-		};
-	};
-
-* DMA client
-
-Required properties:
-- dmas:		a list of <[DMA multiplexer phandle] [MID/RID value]> pairs,
-		where MID/RID values are fixed handles, specified in the SoC
-		manual
-- dma-names:	a list of DMA channel names, one per "dmas" entry
-
-Example:
-	dmas = <&dmac 0xd1
-		&dmac 0xd2>;
-	dma-names = "tx", "rx";
diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
deleted file mode 100644
index f1f95f678739..000000000000
--- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Renesas USB DMA Controller Device Tree bindings
-
-Required Properties:
--compatible: "renesas,<soctype>-usb-dmac", "renesas,usb-dmac" as fallback.
-	Examples with soctypes are:
-	  - "renesas,r8a7743-usb-dmac" (RZ/G1M)
-	  - "renesas,r8a7744-usb-dmac" (RZ/G1N)
-	  - "renesas,r8a7745-usb-dmac" (RZ/G1E)
-	  - "renesas,r8a77470-usb-dmac" (RZ/G1C)
-	  - "renesas,r8a774a1-usb-dmac" (RZ/G2M)
-	  - "renesas,r8a774b1-usb-dmac" (RZ/G2N)
-	  - "renesas,r8a774c0-usb-dmac" (RZ/G2E)
-	  - "renesas,r8a7790-usb-dmac" (R-Car H2)
-	  - "renesas,r8a7791-usb-dmac" (R-Car M2-W)
-	  - "renesas,r8a7793-usb-dmac" (R-Car M2-N)
-	  - "renesas,r8a7794-usb-dmac" (R-Car E2)
-	  - "renesas,r8a7795-usb-dmac" (R-Car H3)
-	  - "renesas,r8a7796-usb-dmac" (R-Car M3-W)
-	  - "renesas,r8a77965-usb-dmac" (R-Car M3-N)
-	  - "renesas,r8a77990-usb-dmac" (R-Car E3)
-	  - "renesas,r8a77995-usb-dmac" (R-Car D3)
-- reg: base address and length of the registers block for the DMAC
-- interrupts: interrupt specifiers for the DMAC, one for each entry in
-  interrupt-names.
-- interrupt-names: one entry per channel, named "ch%u", where %u is the
-  channel number ranging from zero to the number of channels minus one.
-- clocks: a list of phandle + clock-specifier pairs.
-- #dma-cells: must be <1>, the cell specifies the channel number of the DMAC
-  port connected to the DMA client.
-- dma-channels: number of DMA channels
-
-Example: R8A7790 (R-Car H2) USB-DMACs
-
-	usb_dmac0: dma-controller@e65a0000 {
-		compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
-		reg = <0 0xe65a0000 0 0x100>;
-		interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
-			      0 109 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "ch0", "ch1";
-		clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
-		#dma-cells = <1>;
-		dma-channels = <2>;
-	};
-
-	usb_dmac1: dma-controller@e65b0000 {
-		compatible = "renesas,usb-dmac";
-		reg = <0 0xe65b0000 0 0x100>;
-		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
-			      0 110 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "ch0", "ch1";
-		clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
-		#dma-cells = <1>;
-		dma-channels = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
new file mode 100644
index 000000000000..ab287c652b2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,usb-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas USB DMA Controller
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7742-usb-dmac  # RZ/G1H
+          - renesas,r8a7743-usb-dmac  # RZ/G1M
+          - renesas,r8a7744-usb-dmac  # RZ/G1N
+          - renesas,r8a7745-usb-dmac  # RZ/G1E
+          - renesas,r8a77470-usb-dmac # RZ/G1C
+          - renesas,r8a774a1-usb-dmac # RZ/G2M
+          - renesas,r8a774b1-usb-dmac # RZ/G2N
+          - renesas,r8a774c0-usb-dmac # RZ/G2E
+          - renesas,r8a774e1-usb-dmac # RZ/G2H
+          - renesas,r8a7790-usb-dmac  # R-Car H2
+          - renesas,r8a7791-usb-dmac  # R-Car M2-W
+          - renesas,r8a7793-usb-dmac  # R-Car M2-N
+          - renesas,r8a7794-usb-dmac  # R-Car E2
+          - renesas,r8a7795-usb-dmac  # R-Car H3
+          - renesas,r8a7796-usb-dmac  # R-Car M3-W
+          - renesas,r8a77961-usb-dmac # R-Car M3-W+
+          - renesas,r8a77965-usb-dmac # R-Car M3-N
+          - renesas,r8a77990-usb-dmac # R-Car E3
+          - renesas,r8a77995-usb-dmac # R-Car D3
+      - const: renesas,usb-dmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - pattern: ch0
+      - pattern: ch1
+
+  clocks:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+    description:
+      The cell specifies the channel number of the DMAC port connected to
+      the DMA client.
+
+  dma-channels:
+    const: 2
+
+  iommus:
+    minItems: 2
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - '#dma-cells'
+  - dma-channels
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    usb_dmac0: dma-controller@e65a0000 {
+        compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
+        reg = <0xe65a0000 0x100>;
+        interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "ch0", "ch1";
+        clocks = <&cpg CPG_MOD 330>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 330>;
+        #dma-cells = <1>;
+        dma-channels = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
index 2ca3ddbe1ff4..3271755787b4 100644
--- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -22,10 +22,21 @@ description: |
 
   https://static.dev.sifive.com/FU540-C000-v1.0.pdf
 
+allOf:
+  - $ref: "dma-controller.yaml#"
+
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-pdma
+      - enum:
+          - sifive,fu540-c000-pdma
+      - const: sifive,pdma0
+    description:
+      Should be "sifive,<chip>-pdma" and "sifive,pdma<version>".
+      Supported compatible strings are -
+      "sifive,fu540-c000-pdma" for the SiFive PDMA v0 as integrated onto the
+      SiFive FU540 chip resp and "sifive,pdma0" for the SiFive PDMA v0 IP block
+      with no chip integration tweaks.
 
   reg:
     maxItems: 1
@@ -34,6 +45,12 @@ properties:
     minItems: 1
     maxItems: 8
 
+  dma-channels:
+    description: For backwards-compatibility, the default value is 4
+    minimum: 1
+    maximum: 4
+    default: 4
+
   '#dma-cells':
     const: 1
 
@@ -41,14 +58,16 @@ required:
   - compatible
   - reg
   - interrupts
-  - '#dma-cells'
+
+unevaluatedProperties: false
 
 examples:
   - |
-    dma@3000000 {
-      compatible = "sifive,fu540-c000-pdma";
-      reg = <0x0 0x3000000 0x0 0x8000>;
-      interrupts = <23 24 25 26 27 28 29 30>;
+    dma-controller@3000000 {
+      compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+      reg = <0x3000000 0x8000>;
+      dma-channels = <4>;
+      interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, <30>;
       #dma-cells = <1>;
     };
 
diff --git a/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt b/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt
deleted file mode 100644
index ccd52d6a231a..000000000000
--- a/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* CSR SiRFSoC DMA controller
-
-See dma.txt first
-
-Required properties:
-- compatible: Should be "sirf,prima2-dmac", "sirf,atlas7-dmac" or
-  "sirf,atlas7-dmac-v2"
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain one interrupt shared by all channel
-- #dma-cells: must be <1>. used to represent the number of integer
-    cells in the dmas property of client device.
-- clocks: clock required
-
-Example:
-
-Controller:
-dmac0: dma-controller@b00b0000 {
-	compatible = "sirf,prima2-dmac";
-	reg = <0xb00b0000 0x10000>;
-	interrupts = <12>;
-	clocks = <&clks 24>;
-	#dma-cells = <1>;
-};
-
-
-Client:
-Fill the specific dma request line in dmas. In the below example, spi0 read
-channel request line is 9 of the 2nd dma controller, while write channel uses
-4 of the 2nd dma controller; spi1 read channel request line is 12 of the 1st
-dma controller, while write channel uses 13 of the 1st dma controller:
-
-spi0: spi@b00d0000 {
-	compatible = "sirf,prima2-spi";
-	dmas = <&dmac1 9>,
-		<&dmac1 4>;
-	dma-names = "rx", "tx";
-};
-
-spi1: spi@b0170000 {
-	compatible = "sirf,prima2-spi";
-	dmas = <&dmac0 12>,
-		<&dmac0 13>;
-	dma-names = "rx", "tx";
-};
diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
new file mode 100644
index 000000000000..c13649bf7f19
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/snps,dma-spear1340.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware DMA Controller
+
+maintainers:
+  - Viresh Kumar <vireshk@kernel.org>
+  - Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: snps,dma-spear1340
+      - items:
+          - enum:
+              - renesas,r9a06g032-dma
+          - const: renesas,rzn1-dma
+
+
+  "#dma-cells":
+    minimum: 3
+    maximum: 4
+    description: |
+      First cell is a phandle pointing to the DMA controller. Second one is
+      the DMA request line number. Third cell is the memory master identifier
+      for transfers on dynamically allocated channel. Fourth cell is the
+      peripheral master identifier for transfers on an allocated channel. Fifth
+      cell is an optional mask of the DMA channels permitted to be allocated
+      for the corresponding client device.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description: AHB interface reference clock.
+    const: hclk
+
+  dma-channels:
+    description: |
+      Number of DMA channels supported by the controller. In case if
+      not specified the driver will try to auto-detect this and
+      the rest of the optional parameters.
+    minimum: 1
+    maximum: 8
+
+  dma-requests:
+    minimum: 1
+    maximum: 16
+
+  dma-masters:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Number of DMA masters supported by the controller. In case if
+      not specified the driver will try to auto-detect this and
+      the rest of the optional parameters.
+    minimum: 1
+    maximum: 4
+
+  chan_allocation_order:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DMA channels allocation order specifier. Zero means ascending order
+      (first free allocated), while one - descending (last free allocated).
+    default: 0
+    enum: [0, 1]
+
+  chan_priority:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DMA channels priority order. Zero means ascending channels priority
+      so the very first channel has the highest priority. While 1 means
+      descending priority (the last channel has the highest priority).
+    default: 0
+    enum: [0, 1]
+
+  block_size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Maximum block size supported by the DMA controller.
+    enum: [3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095]
+
+  data-width:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Data bus width per each DMA master in bytes.
+    items:
+      maxItems: 4
+      items:
+        enum: [4, 8, 16, 32]
+
+  data_width:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    deprecated: true
+    description: |
+      Data bus width per each DMA master in (2^n * 8) bits. This property is
+      deprecated. It' usage is discouraged in favor of data-width one. Moreover
+      the property incorrectly permits to define data-bus width of 8 and 16
+      bits, which is impossible in accordance with DW DMAC IP-core data book.
+    items:
+      maxItems: 4
+      items:
+        enum:
+          - 0 # 8 bits
+          - 1 # 16 bits
+          - 2 # 32 bits
+          - 3 # 64 bits
+          - 4 # 128 bits
+          - 5 # 256 bits
+        default: 0
+
+  multi-block:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      LLP-based multi-block transfer supported by hardware per
+      each DMA channel.
+    items:
+      maxItems: 8
+      items:
+        enum: [0, 1]
+        default: 1
+
+  snps,max-burst-len:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Maximum length of the burst transactions supported by the controller.
+      This property defines the upper limit of the run-time burst setting
+      (CTLx.SRC_MSIZE/CTLx.DST_MSIZE fields) so the allowed burst length
+      will be from 1 to max-burst-len words. It's an array property with one
+      cell per channel in the units determined by the value set in the
+      CTLx.SRC_TR_WIDTH/CTLx.DST_TR_WIDTH fields (data width).
+    items:
+      maxItems: 8
+      items:
+        enum: [4, 8, 16, 32, 64, 128, 256]
+        default: 256
+
+  snps,dma-protection-control:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Bits one-to-one passed to the AHB HPROT[3:1] bus. Each bit setting
+      indicates the following features: bit 0 - privileged mode,
+      bit 1 - DMA is bufferable, bit 2 - DMA is cacheable.
+    default: 0
+    minimum: 0
+    maximum: 7
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#dma-cells"
+  - reg
+  - interrupts
+
+examples:
+  - |
+    dma-controller@fc000000 {
+      compatible = "snps,dma-spear1340";
+      reg = <0xfc000000 0x1000>;
+      interrupt-parent = <&vic1>;
+      interrupts = <12>;
+
+      dma-channels = <8>;
+      dma-requests = <16>;
+      dma-masters = <4>;
+      #dma-cells = <3>;
+
+      chan_allocation_order = <1>;
+      chan_priority = <1>;
+      block_size = <0xfff>;
+      data-width = <8 8>;
+      multi-block = <0 0 0 0 0 0 0 0>;
+      snps,max-burst-len = <16 16 4 4 4 4 4 4>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
deleted file mode 100644
index dbe160400adc..000000000000
--- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Synopsys DesignWare AXI DMA Controller
-
-Required properties:
-- compatible: "snps,axi-dma-1.01a"
-- reg: Address range of the DMAC registers. This should include
-  all of the per-channel registers.
-- interrupt: Should contain the DMAC interrupt number.
-- dma-channels: Number of channels supported by hardware.
-- snps,dma-masters: Number of AXI masters supported by the hardware.
-- snps,data-width: Maximum AXI data width supported by hardware.
-  (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
-- snps,priority: Priority of channel. Array size is equal to the number of
-  dma-channels. Priority value must be programmed within [0:dma-channels-1]
-  range. (0 - minimum priority)
-- snps,block-size: Maximum block size supported by the controller channel.
-  Array size is equal to the number of dma-channels.
-
-Optional properties:
-- snps,axi-max-burst-len: Restrict master AXI burst length by value specified
-  in this property. If this property is missing the maximum AXI burst length
-  supported by DMAC is used. [1:256]
-
-Example:
-
-dmac: dma-controller@80000 {
-	compatible = "snps,axi-dma-1.01a";
-	reg = <0x80000 0x400>;
-	clocks = <&core_clk>, <&cfgr_clk>;
-	clock-names = "core-clk", "cfgr-clk";
-	interrupt-parent = <&intc>;
-	interrupts = <27>;
-
-	dma-channels = <4>;
-	snps,dma-masters = <2>;
-	snps,data-width = <3>;
-	snps,block-size = <4096 4096 4096 4096>;
-	snps,priority = <0 1 2 3>;
-	snps,axi-max-burst-len = <16>;
-};
diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
new file mode 100644
index 000000000000..67aa7bb6d36a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/snps,dw-axi-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare AXI DMA Controller
+
+maintainers:
+  - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+  - Jee Heng Sia <jee.heng.sia@intel.com>
+
+description:
+  Synopsys DesignWare AXI DMA Controller DT Binding
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - snps,axi-dma-1.01a
+      - intel,kmb-axi-dma
+
+  reg:
+    minItems: 1
+    items:
+      - description: Address range of the DMAC registers
+      - description: Address range of the DMAC APB registers
+
+  reg-names:
+    items:
+      - const: axidma_ctrl_regs
+      - const: axidma_apb_regs
+
+  interrupts:
+    description:
+      If the IP-core synthesis parameter DMAX_INTR_IO_TYPE is set to 1, this
+      will be per-channel interrupts. Otherwise, this is a single combined IRQ
+      for all channels.
+    minItems: 1
+    maxItems: 8
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: core-clk
+      - const: cfgr-clk
+
+  '#dma-cells':
+    const: 1
+
+  dma-channels:
+    minimum: 1
+    maximum: 8
+
+  resets:
+    maxItems: 1
+
+  snps,dma-masters:
+    description: |
+      Number of AXI masters supported by the hardware.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  snps,data-width:
+    description: |
+      AXI data width supported by hardware.
+      (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+  snps,priority:
+    description: |
+      Channel priority specifier associated with the DMA channels.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  snps,block-size:
+    description: |
+      Channel block size specifier associated with the DMA channels.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  snps,axi-max-burst-len:
+    description: |
+      Restrict master AXI burst length by value specified in this property.
+      If this property is missing the maximum AXI burst length supported by
+      DMAC is used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 256
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - '#dma-cells'
+  - dma-channels
+  - snps,dma-masters
+  - snps,data-width
+  - snps,priority
+  - snps,block-size
+
+additionalProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/interrupt-controller/irq.h>
+     /* example with snps,dw-axi-dmac */
+     dmac: dma-controller@80000 {
+         compatible = "snps,axi-dma-1.01a";
+         reg = <0x80000 0x400>;
+         clocks = <&core_clk>, <&cfgr_clk>;
+         clock-names = "core-clk", "cfgr-clk";
+         interrupt-parent = <&intc>;
+         interrupts = <27>;
+         #dma-cells = <1>;
+         dma-channels = <4>;
+         snps,dma-masters = <2>;
+         snps,data-width = <3>;
+         snps,block-size = <4096 4096 4096 4096>;
+         snps,priority = <0 1 2 3>;
+         snps,axi-max-burst-len = <16>;
+     };
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
deleted file mode 100644
index 0bedceed1963..000000000000
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-* Synopsys Designware DMA Controller
-
-Required properties:
-- compatible: "snps,dma-spear1340"
-- reg: Address range of the DMAC registers
-- interrupt: Should contain the DMAC interrupt number
-- dma-channels: Number of channels supported by hardware
-- dma-requests: Number of DMA request lines supported, up to 16
-- dma-masters: Number of AHB masters supported by the controller
-- #dma-cells: must be <3>
-- chan_allocation_order: order of allocation of channel, 0 (default): ascending,
-  1: descending
-- chan_priority: priority of channels. 0 (default): increase from chan 0->n, 1:
-  increase from chan n->0
-- block_size: Maximum block size supported by the controller
-- data-width: Maximum data width supported by hardware per AHB master
-  (in bytes, power of 2)
-
-
-Deprecated properties:
-- data_width: Maximum data width supported by hardware per AHB master
-  (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
-
-
-Optional properties:
-- multi-block: Multi block transfers supported by hardware. Array property with
-  one cell per channel. 0: not supported, 1 (default): supported.
-- snps,dma-protection-control: AHB HPROT[3:1] protection setting.
-  The default value is 0 (for non-cacheable, non-buffered,
-  unprivileged data access).
-  Refer to include/dt-bindings/dma/dw-dmac.h for possible values.
-
-Example:
-
-	dmahost: dma@fc000000 {
-		compatible = "snps,dma-spear1340";
-		reg = <0xfc000000 0x1000>;
-		interrupt-parent = <&vic1>;
-		interrupts = <12>;
-
-		dma-channels = <8>;
-		dma-requests = <16>;
-		dma-masters = <2>;
-		#dma-cells = <3>;
-		chan_allocation_order = <1>;
-		chan_priority = <1>;
-		block_size = <0xfff>;
-		data-width = <8 8>;
-	};
-
-DMA clients connected to the Designware DMA controller must use the format
-described in the dma.txt file, using a four-cell specifier for each channel.
-The four cells in order are:
-
-1. A phandle pointing to the DMA controller
-2. The DMA request line number
-3. Memory master for transfers on allocated channel
-4. Peripheral master for transfers on allocated channel
-
-Example:
-	
-	serial@e0000000 {
-		compatible = "arm,pl011", "arm,primecell";
-		reg = <0xe0000000 0x1000>;
-		interrupts = <0 35 0x4>;
-		dmas = <&dmahost 12 0 1>,
-			<&dmahost 13 1 0>;
-		dma-names = "rx", "rx";
-	};
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
new file mode 100644
index 000000000000..e7bf6dd7da29
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/socionext,uniphier-mio-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier Media IO DMA controller
+
+description: |
+  This works as an external DMA engine for SD/eMMC controllers etc.
+  found in UniPhier LD4, Pro4, sLD8 SoCs.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    const: socionext,uniphier-mio-dmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      A list of interrupt specifiers associated with the DMA channels.
+      The number of interrupt lines is SoC-dependent.
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#dma-cells':
+    description: The single cell represents the channel index.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // In the example below, "interrupts = <0 68 4>, <0 68 4>, ..." is not a
+    // typo. The first two channels share a single interrupt line.
+
+    dmac: dma-controller@5a000000 {
+        compatible = "socionext,uniphier-mio-dmac";
+        reg = <0x5a000000 0x1000>;
+        interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+                     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
+        clocks = <&mio_clk 7>;
+        resets = <&mio_rst 7>;
+        #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
new file mode 100644
index 000000000000..371f18773198
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/socionext,uniphier-xdmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier external DMA controller
+
+description: |
+  This describes the devicetree bindings for an external DMA engine to perform
+  memory-to-memory or peripheral-to-memory data transfer capable of supporting
+  16 channels, implemented in Socionext UniPhier SoCs.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    const: socionext,uniphier-xdmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 2
+    description: |
+      DMA request from clients consists of 2 cells:
+        1. Channel index
+        2. Transfer request factor number, If no transfer factor, use 0.
+           The number is SoC-specific, and this should be specified with
+           relation to the device to use the DMA controller.
+
+  dma-channels:
+    minimum: 1
+    maximum: 16
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - dma-channels
+
+examples:
+  - |
+    xdmac: dma-controller@5fc10000 {
+        compatible = "socionext,uniphier-xdmac";
+        reg = <0x5fc10000 0x5300>;
+        interrupts = <0 188 4>;
+        #dma-cells = <2>;
+        dma-channels = <16>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt
index adccea9941f1..c7e9b5fd50e7 100644
--- a/Documentation/devicetree/bindings/dma/sprd-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt
@@ -8,10 +8,13 @@ Required properties:
 - interrupts: Should contain one interrupt shared by all channel.
 - #dma-cells: must be <1>. Used to represent the number of integer
 	cells in the dmas property of client device.
-- #dma-channels : Number of DMA channels supported. Should be 32.
+- dma-channels : Number of DMA channels supported. Should be 32.
 - clock-names: Should contain the clock of the DMA controller.
 - clocks: Should contain a clock specifier for each entry in clock-names.
 
+Deprecated properties:
+- #dma-channels : Number of DMA channels supported. Should be 32.
+
 Example:
 
 Controller:
@@ -20,7 +23,7 @@ apdma: dma-controller@20100000 {
 	reg = <0x20100000 0x4000>;
 	interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 	#dma-cells = <1>;
-	#dma-channels = <32>;
+	dma-channels = <32>;
 	clock-names = "enable";
 	clocks = <&clk_ap_ahb_gates 5>;
 };
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
index 0c0ac11ad55f..55faab6a468e 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
@@ -36,9 +36,21 @@ description: |
          0x1: 1/2 full FIFO
          0x2: 3/4 full FIFO
          0x3: full FIFO
+       -bit 2: DMA direct mode
+         0x0: FIFO mode with threshold selectable with bit 0-1
+         0x1: Direct mode: each DMA request immediately initiates a transfer
+              from/to the memory, FIFO is bypassed.
+       -bit 4: alternative DMA request/acknowledge protocol
+         0x0: Use standard DMA ACK management, where ACK signal is maintained
+              up to the removal of request and transfer completion
+         0x1: Use alternative DMA ACK management, where ACK de-assertion does
+              not wait for the de-assertion of the REQuest, ACK is only managed
+              by transfer completion. This must only be used on channels
+              managing transfers for STM32 USART/UART.
+
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
   - $ref: "dma-controller.yaml#"
@@ -76,6 +88,8 @@ required:
   - clocks
   - interrupts
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
index 915bc4af9568..1e1d8549b7ef 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 DMA MUX (DMA request router) bindings
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
   - $ref: "dma-router.yaml#"
@@ -33,6 +33,8 @@ required:
   - reg
   - dma-masters
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -44,9 +46,8 @@ examples:
       #dma-cells = <3>;
       dma-requests = <128>;
       dma-channels = <16>;
-      dma-masters = <&dma1 &dma2>;
+      dma-masters = <&dma1>, <&dma2>;
       clocks = <&timer_clk>;
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
index c66543d0c267..00cfa3913652 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
@@ -50,7 +50,7 @@ description: |
        if no HW ack signal is used by the MDMA client
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
   - $ref: "dma-controller.yaml#"
@@ -84,6 +84,8 @@ required:
   - clocks
   - interrupts
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -102,4 +104,3 @@ examples:
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/dma/ste-coh901318.txt b/Documentation/devicetree/bindings/dma/ste-coh901318.txt
deleted file mode 100644
index 091ad057e9cf..000000000000
--- a/Documentation/devicetree/bindings/dma/ste-coh901318.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-ST-Ericsson COH 901 318 DMA Controller
-
-This is a DMA controller which has begun as a fork of the
-ARM PL08x PrimeCell VHDL code.
-
-Required properties:
-- compatible: should be "stericsson,coh901318"
-- reg: register locations and length
-- interrupts: the single DMA IRQ
-- #dma-cells: must be set to <1>, as the channels on the
-  COH 901 318 are simple and identified by a single number
-- dma-channels: the number of DMA channels handled
-
-Example:
-
-dmac: dma-controller@c00020000 {
-	compatible = "stericsson,coh901318";
-	reg = <0xc0020000 0x1000>;
-	interrupt-parent = <&vica>;
-	interrupts = <2>;
-	#dma-cells = <1>;
-	dma-channels = <40>;
-};
-
-Consumers example:
-
-uart0: serial@c0013000 {
-	compatible = "...";
-	(...)
-	dmas = <&dmac 17 &dmac 18>;
-	dma-names = "tx", "rx";
-};
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
deleted file mode 100644
index 99ab5c4d331e..000000000000
--- a/Documentation/devicetree/bindings/dma/ste-dma40.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-* DMA40 DMA Controller
-
-Required properties:
-- compatible: "stericsson,dma40"
-- reg: Address range of the DMAC registers
-- reg-names: Names of the above areas to use during resource look-up
-- interrupt: Should contain the DMAC interrupt number
-- #dma-cells: must be <3>
-- memcpy-channels: Channels to be used for memcpy
-
-Optional properties:
-- dma-channels: Number of channels supported by hardware - if not present
-		the driver will attempt to obtain the information from H/W
-- disabled-channels: Channels which can not be used
-
-Example:
-
-	dma: dma-controller@801c0000 {
-		compatible = "stericsson,db8500-dma40", "stericsson,dma40";
-		reg = <0x801C0000 0x1000  0x40010000 0x800>;
-		reg-names = "base", "lcpa";
-		interrupt-parent = <&intc>;
-		interrupts = <0 25 0x4>;
-
-		#dma-cells = <2>;
-		memcpy-channels  = <56 57 58 59 60>;
-		disabled-channels  = <12>;
-		dma-channels = <8>;
-	};
-
-Clients
-Required properties:
-- dmas: Comma separated list of dma channel requests
-- dma-names: Names of the aforementioned requested channels
-
-Each dmas request consists of 4 cells:
-  1. A phandle pointing to the DMA controller
-  2. Device signal number, the signal line for single and burst requests
-     connected from the device to the DMA40 engine
-  3. The DMA request line number (only when 'use fixed channel' is set)
-  4. A 32bit mask specifying; mode, direction and endianness
-     [NB: This list will grow]
-        0x00000001: Mode:
-                Logical channel when unset
-                Physical channel when set
-        0x00000002: Direction:
-                Memory to Device when unset
-                Device to Memory when set
-        0x00000004: Endianness:
-                Little endian when unset
-                Big endian when set
-        0x00000008: Use fixed channel:
-                Use automatic channel selection when unset
-                Use DMA request line number when set
-        0x00000010: Set channel as high priority:
-                Normal priority when unset
-                High priority when set
-
-Existing signal numbers for the DB8500 ASIC. Unless specified, the signals are
-bidirectional, i.e. the same for RX and TX operations:
-
-0:  SPI controller 0
-1:  SD/MMC controller 0 (unused)
-2:  SD/MMC controller 1 (unused)
-3:  SD/MMC controller 2 (unused)
-4:  I2C port 1
-5:  I2C port 3
-6:  I2C port 2
-7:  I2C port 4
-8:  Synchronous Serial Port SSP0
-9:  Synchronous Serial Port SSP1
-10: Multi-Channel Display Engine MCDE RX
-11: UART port 2
-12: UART port 1
-13: UART port 0
-14: Multirate Serial Port MSP2
-15: I2C port 0
-16: USB OTG in/out endpoints 7 & 15
-17: USB OTG in/out endpoints 6 & 14
-18: USB OTG in/out endpoints 5 & 13
-19: USB OTG in/out endpoints 4 & 12
-20: SLIMbus or HSI channel 0
-21: SLIMbus or HSI channel 1
-22: SLIMbus or HSI channel 2
-23: SLIMbus or HSI channel 3
-24: Multimedia DSP SXA0
-25: Multimedia DSP SXA1
-26: Multimedia DSP SXA2
-27: Multimedia DSP SXA3
-28: SD/MM controller 2
-29: SD/MM controller 0
-30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
-31: MSP port 0 or SLIMbus channel 0
-32: SD/MM controller 1
-33: SPI controller 2
-34: i2c3 RX2 TX2
-35: SPI controller 1
-36: USB OTG in/out endpoints 3 & 11
-37: USB OTG in/out endpoints 2 & 10
-38: USB OTG in/out endpoints 1 & 9
-39: USB OTG in/out endpoints 8
-40: SPI controller 3
-41: SD/MM controller 3
-42: SD/MM controller 4
-43: SD/MM controller 5
-44: Multimedia DSP SXA4
-45: Multimedia DSP SXA5
-46: SLIMbus channel 8 or Multimedia DSP SXA6
-47: SLIMbus channel 9 or Multimedia DSP SXA7
-48: Crypto Accelerator 1
-49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
-50: Hash Accelerator 1 TX
-51: memcpy TX (to be used by the DMA driver for memcpy operations)
-52: SLIMbus or HSI channel 4
-53: SLIMbus or HSI channel 5
-54: SLIMbus or HSI channel 6
-55: SLIMbus or HSI channel 7
-56: memcpy (to be used by the DMA driver for memcpy operations)
-57: memcpy (to be used by the DMA driver for memcpy operations)
-58: memcpy (to be used by the DMA driver for memcpy operations)
-59: memcpy (to be used by the DMA driver for memcpy operations)
-60: memcpy (to be used by the DMA driver for memcpy operations)
-61: Crypto Accelerator 0
-62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
-63: Hash Accelerator 0 TX
-
-Example:
-
-	uart@80120000 {
-		compatible = "arm,pl011", "arm,primecell";
-		reg = <0x80120000 0x1000>;
-		interrupts = <0 11 0x4>;
-
-		dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
-		       <&dma 13 0 0x0>; /* Logical - MemToDev */
-		dma-names = "rx", "rx";
-
-	};
diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
new file mode 100644
index 000000000000..8bddfb3b6fa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/stericsson,dma40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DMA40 DMA Engine
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 3
+    description: |
+      The first cell is the unique device channel number as indicated by this
+      table for DB8500 which is the only ASIC known to use DMA40:
+
+      0:  SPI controller 0
+      1:  SD/MMC controller 0 (unused)
+      2:  SD/MMC controller 1 (unused)
+      3:  SD/MMC controller 2 (unused)
+      4:  I2C port 1
+      5:  I2C port 3
+      6:  I2C port 2
+      7:  I2C port 4
+      8:  Synchronous Serial Port SSP0
+      9:  Synchronous Serial Port SSP1
+      10: Multi-Channel Display Engine MCDE RX
+      11: UART port 2
+      12: UART port 1
+      13: UART port 0
+      14: Multirate Serial Port MSP2
+      15: I2C port 0
+      16: USB OTG in/out endpoints 7 & 15
+      17: USB OTG in/out endpoints 6 & 14
+      18: USB OTG in/out endpoints 5 & 13
+      19: USB OTG in/out endpoints 4 & 12
+      20: SLIMbus or HSI channel 0
+      21: SLIMbus or HSI channel 1
+      22: SLIMbus or HSI channel 2
+      23: SLIMbus or HSI channel 3
+      24: Multimedia DSP SXA0
+      25: Multimedia DSP SXA1
+      26: Multimedia DSP SXA2
+      27: Multimedia DSP SXA3
+      28: SD/MMC controller 2
+      29: SD/MMC controller 0
+      30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
+      31: MSP port 0 or SLIMbus channel 0
+      32: SD/MMC controller 1
+      33: SPI controller 2
+      34: i2c3 RX2 TX2
+      35: SPI controller 1
+      36: USB OTG in/out endpoints 3 & 11
+      37: USB OTG in/out endpoints 2 & 10
+      38: USB OTG in/out endpoints 1 & 9
+      39: USB OTG in/out endpoints 8
+      40: SPI controller 3
+      41: SD/MMC controller 3
+      42: SD/MMC controller 4
+      43: SD/MMC controller 5
+      44: Multimedia DSP SXA4
+      45: Multimedia DSP SXA5
+      46: SLIMbus channel 8 or Multimedia DSP SXA6
+      47: SLIMbus channel 9 or Multimedia DSP SXA7
+      48: Crypto Accelerator 1
+      49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
+      50: Hash Accelerator 1 TX
+      51: memcpy TX (to be used by the DMA driver for memcpy operations)
+      52: SLIMbus or HSI channel 4
+      53: SLIMbus or HSI channel 5
+      54: SLIMbus or HSI channel 6
+      55: SLIMbus or HSI channel 7
+      56: memcpy (to be used by the DMA driver for memcpy operations)
+      57: memcpy (to be used by the DMA driver for memcpy operations)
+      58: memcpy (to be used by the DMA driver for memcpy operations)
+      59: memcpy (to be used by the DMA driver for memcpy operations)
+      60: memcpy (to be used by the DMA driver for memcpy operations)
+      61: Crypto Accelerator 0
+      62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
+      63: Hash Accelerator 0 TX
+
+      The second cell is the DMA request line number. This is only used when
+      a fixed channel is allocated, and indicated by setting bit 3 in the
+      flags field (see below).
+
+      The third cell is a 32bit flags bitfield with the following possible
+      bits set:
+      0x00000001 (bit 0) - mode:
+        Logical channel when unset
+        Physical channel when set
+      0x00000002 (bit 1) - direction:
+        Memory to Device when unset
+        Device to Memory when set
+      0x00000004 (bit 2) - endianness:
+        Little endian when unset
+        Big endian when set
+      0x00000008 (bit 3) - use fixed channel:
+        Use automatic channel selection when unset
+        Use DMA request line number when set
+      0x00000010 (bit 4) - set channel as high priority:
+        Normal priority when unset
+        High priority when set
+
+  compatible:
+    items:
+      - const: stericsson,db8500-dma40
+      - const: stericsson,dma40
+
+  reg:
+    items:
+      - description: DMA40 memory base
+      - description: LCPA memory base
+
+  reg-names:
+    items:
+      - const: base
+      - const: lcpa
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  memcpy-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Array of u32 elements indicating which channels on the DMA
+      engine are elegible for memcpy transfers
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - memcpy-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mfd/dbx500-prcmu.h>
+    dma-controller@801C0000 {
+      compatible = "stericsson,db8500-dma40", "stericsson,dma40";
+      reg = <0x801C0000 0x1000>, <0x40010000 0x800>;
+      reg-names = "base", "lcpa";
+      interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+      #dma-cells = <3>;
+      memcpy-channels = <56 57 58 59 60>;
+      clocks = <&prcmu_clk PRCMU_DMACLK>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
index b849a1ed389d..47e477cce6d2 100644
--- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
+++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
@@ -4,7 +4,7 @@ Required properties:
 - compatible:	"ti,dra7-dma-crossbar" for DRA7xx DMA crossbar
 		"ti,am335x-edma-crossbar" for AM335x and AM437x
 - reg:		Memory map for accessing module
-- #dma-cells:	Should be set to to match with the DMA controller's dma-cells
+- #dma-cells:	Should be set to match with the DMA controller's dma-cells
 		for ti,dra7-dma-crossbar and <3> for ti,am335x-edma-crossbar.
 - dma-requests:	Number of DMA requests the crossbar can receive
 - dma-masters:	phandle pointing to the DMA controller
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 0e1398f93aa2..f719e1612b0a 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -33,7 +33,7 @@ The following are mandatory properties for 66AK2G SoCs only:
 - power-domains:Should contain a phandle to a PM domain provider node
 		and an args specifier containing the device id
 		value. This property is as per the binding,
-		Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+		Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
 
 Optional properties:
 -------------------
@@ -70,7 +70,7 @@ The following are mandatory properties for 66AK2G SoCs only:
 - power-domains:Should contain a phandle to a PM domain provider node
 		and an args specifier containing the device id
 		value. This property is as per the binding,
-		Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+		Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
 
 Optional properties:
 -------------------
@@ -180,7 +180,7 @@ edma1_tptc0: tptc@27b0000 {
 };
 
 edma1_tptc1: tptc@27b8000 {
-	compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc";
+	compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
 	reg =	<0x027b8000 0x400>;
 	power-domains = <&k2g_pds 0x4f>;
 };
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
new file mode 100644
index 000000000000..08627d91e607
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+# Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ti/k3-bcdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 DMSS BCDMA Device Tree Bindings
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description: |
+  The Block Copy DMA (BCDMA) is intended to perform similar functions as the TR
+  mode channels of K3 UDMA-P.
+  BCDMA includes block copy channels and Split channels.
+
+  Block copy channels mainly used for memory to memory transfers, but with
+  optional triggers a block copy channel can service peripherals by accessing
+  directly to memory mapped registers or area.
+
+  Split channels can be used to service PSI-L based peripherals.
+  The peripherals can be PSI-L native or legacy, non PSI-L native peripherals
+  with PDMAs. PDMA is tasked to act as a bridge between the PSI-L fabric and the
+  legacy peripheral.
+
+  PDMAs can be configured via BCDMA split channel's peer registers to match with
+  the configuration of the legacy peripheral.
+
+allOf:
+  - $ref: /schemas/dma/dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+  compatible:
+    const: ti,am64-dmss-bcdma
+
+  "#dma-cells":
+    const: 3
+    description: |
+      cell 1: type of the BCDMA channel to be used to service the peripheral:
+        0 - split channel
+        1 - block copy channel using global trigger 1
+        2 - block copy channel using global trigger 2
+        3 - block copy channel using local trigger
+
+      cell 2: parameter for the channel:
+        if cell 1 is 0 (split channel):
+          PSI-L thread ID of the remote (to BCDMA) end.
+          Valid ranges for thread ID depends on the data movement direction:
+          for source thread IDs (rx): 0 - 0x7fff
+          for destination thread IDs (tx): 0x8000 - 0xffff
+
+          Please refer to the device documentation for the PSI-L thread map and
+          also the PSI-L peripheral chapter for the correct thread ID.
+        if cell 1 is 1 or 2 (block copy channel using global trigger):
+          Unused, ignored
+
+          The trigger must be configured for the channel externally to BCDMA,
+          channels using global triggers should not be requested directly, but
+          via DMA event router.
+        if cell 1 is 3 (block copy channel using local trigger):
+          bchan number of the locally triggered channel
+
+      cell 3: ASEL value for the channel
+
+  reg:
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: gcfg
+      - const: bchanrt
+      - const: rchanrt
+      - const: tchanrt
+      - const: ringrt
+
+  msi-parent: true
+
+  ti,asel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: ASEL value for non slave channels
+
+  ti,sci-rm-range-bchan:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of BCDMA block-copy channel resource subtypes for resource
+      allocation for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+  ti,sci-rm-range-tchan:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of BCDMA split tx channel resource subtypes for resource allocation
+      for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+  ti,sci-rm-range-rchan:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of BCDMA split rx channel resource subtypes for resource allocation
+      for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+required:
+  - compatible
+  - "#dma-cells"
+  - reg
+  - reg-names
+  - msi-parent
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,sci-rm-range-bchan
+  - ti,sci-rm-range-tchan
+  - ti,sci-rm-range-rchan
+
+unevaluatedProperties: false
+
+examples:
+  - |+
+    cbass_main {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        main_dmss {
+            compatible = "simple-mfd";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            dma-ranges;
+            ranges;
+
+            ti,sci-dev-id = <25>;
+
+            main_bcdma: dma-controller@485c0100 {
+                compatible = "ti,am64-dmss-bcdma";
+
+                reg = <0x0 0x485c0100 0x0 0x100>,
+                      <0x0 0x4c000000 0x0 0x20000>,
+                      <0x0 0x4a820000 0x0 0x20000>,
+                      <0x0 0x4aa40000 0x0 0x20000>,
+                      <0x0 0x4bc00000 0x0 0x100000>;
+                reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+                msi-parent = <&inta_main_dmss>;
+                #dma-cells = <3>;
+
+                ti,sci = <&dmsc>;
+                ti,sci-dev-id = <26>;
+
+                ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
+                ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
+                ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
new file mode 100644
index 000000000000..507d16d84ade
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+# Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ti/k3-pktdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 DMSS PKTDMA Device Tree Bindings
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description: |
+  The Packet DMA (PKTDMA) is intended to perform similar functions as the packet
+  mode channels of K3 UDMA-P.
+  PKTDMA only includes Split channels to service PSI-L based peripherals.
+
+  The peripherals can be PSI-L native or legacy, non PSI-L native peripherals
+  with PDMAs. PDMA is tasked to act as a bridge between the PSI-L fabric and the
+  legacy peripheral.
+
+  PDMAs can be configured via PKTDMA split channel's peer registers to match
+  with the configuration of the legacy peripheral.
+
+allOf:
+  - $ref: /schemas/dma/dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+  compatible:
+    const: ti,am64-dmss-pktdma
+
+  "#dma-cells":
+    const: 2
+    description: |
+      The first cell is the PSI-L  thread ID of the remote (to PKTDMA) end.
+      Valid ranges for thread ID depends on the data movement direction:
+      for source thread IDs (rx): 0 - 0x7fff
+      for destination thread IDs (tx): 0x8000 - 0xffff
+
+      Please refer to the device documentation for the PSI-L thread map and also
+      the PSI-L peripheral chapter for the correct thread ID.
+
+      The second cell is the ASEL value for the channel
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: gcfg
+      - const: rchanrt
+      - const: tchanrt
+      - const: ringrt
+
+  msi-parent: true
+
+  ti,sci-rm-range-tchan:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of PKTDMA split tx channel resource subtypes for resource allocation
+      for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+  ti,sci-rm-range-tflow:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of PKTDMA split tx flow resource subtypes for resource allocation
+      for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+  ti,sci-rm-range-rchan:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of PKTDMA split rx channel resource subtypes for resource allocation
+      for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+  ti,sci-rm-range-rflow:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of PKTDMA split rx flow resource subtypes for resource allocation
+      for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+required:
+  - compatible
+  - "#dma-cells"
+  - reg
+  - reg-names
+  - msi-parent
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,sci-rm-range-tchan
+  - ti,sci-rm-range-tflow
+  - ti,sci-rm-range-rchan
+  - ti,sci-rm-range-rflow
+
+unevaluatedProperties: false
+
+examples:
+  - |+
+    cbass_main {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        main_dmss {
+            compatible = "simple-mfd";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            dma-ranges;
+            ranges;
+
+            ti,sci-dev-id = <25>;
+
+            main_pktdma: dma-controller@485c0000 {
+                compatible = "ti,am64-dmss-pktdma";
+
+                reg = <0x0 0x485c0000 0x0 0x100>,
+                      <0x0 0x4a800000 0x0 0x20000>,
+                      <0x0 0x4aa00000 0x0 0x40000>,
+                      <0x0 0x4b800000 0x0 0x400000>;
+                reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+                msi-parent = <&inta_main_dmss>;
+                #dma-cells = <2>;
+
+                ti,sci = <&dmsc>;
+                ti,sci-dev-id = <30>;
+
+                ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
+                                        <0x24>, /* CPSW_TX_CHAN */
+                                        <0x25>, /* SAUL_TX_0_CHAN */
+                                        <0x26>, /* SAUL_TX_1_CHAN */
+                                        <0x27>, /* ICSSG_0_TX_CHAN */
+                                        <0x28>; /* ICSSG_1_TX_CHAN */
+                ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
+                                        <0x11>, /* RING_CPSW_TX_CHAN */
+                                        <0x12>, /* RING_SAUL_TX_0_CHAN */
+                                        <0x13>, /* RING_SAUL_TX_1_CHAN */
+                                        <0x14>, /* RING_ICSSG_0_TX_CHAN */
+                                        <0x15>; /* RING_ICSSG_1_TX_CHAN */
+                ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
+                                        <0x2b>, /* CPSW_RX_CHAN */
+                                        <0x2d>, /* SAUL_RX_0_CHAN */
+                                        <0x2f>, /* SAUL_RX_1_CHAN */
+                                        <0x31>, /* SAUL_RX_2_CHAN */
+                                        <0x33>, /* SAUL_RX_3_CHAN */
+                                        <0x35>, /* ICSSG_0_RX_CHAN */
+                                        <0x37>; /* ICSSG_1_RX_CHAN */
+                ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
+                                        <0x2c>, /* FLOW_CPSW_RX_CHAN */
+                                        <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
+                                        <0x32>, /* FLOW_SAUL_RX_2/3_CHAN */
+                                        <0x36>, /* FLOW_ICSSG_0_RX_CHAN */
+                                        <0x38>; /* FLOW_ICSSG_1_RX_CHAN */
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
index 34780d7535b8..6a09bbf83d46 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@@ -1,4 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+# Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/dma/ti/k3-udma.yaml#
@@ -7,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments K3 NAVSS Unified DMA Device Tree Bindings
 
 maintainers:
-  - Peter Ujfalusi <peter.ujfalusi@ti.com>
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
 
 description: |
   The UDMA-P is intended to perform similar (but significantly upgraded)
@@ -45,7 +47,8 @@ allOf:
 
 properties:
   "#dma-cells":
-    const: 1
+    minimum: 1
+    maximum: 2
     description: |
       The cell is the PSI-L  thread ID of the remote (to UDMAP) end.
       Valid ranges for thread ID depends on the data movement direction:
@@ -55,6 +58,8 @@ properties:
       Please refer to the device documentation for the PSI-L thread map and also
       the PSI-L peripheral chapter for the correct thread ID.
 
+      When #dma-cells is 2, the second parameter is the channel ATYPE.
+
   compatible:
     enum:
       - ti,am654-navss-main-udmap
@@ -66,34 +71,30 @@ properties:
     maxItems: 3
 
   reg-names:
-   items:
-     - const: gcfg
-     - const: rchanrt
-     - const: tchanrt
+    items:
+      - const: gcfg
+      - const: rchanrt
+      - const: tchanrt
 
   msi-parent: true
 
   ti,sci:
     description: phandle to TI-SCI compatible System controller node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   ti,sci-dev-id:
     description: TI-SCI device id of UDMAP
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   ti,ringacc:
     description: phandle to the ring accelerator node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   ti,sci-rm-range-tchan:
     description: |
       Array of UDMA tchan resource subtypes for resource allocation for this
       host
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     # Should be enough
     maxItems: 255
@@ -102,8 +103,7 @@ properties:
     description: |
       Array of UDMA rchan resource subtypes for resource allocation for this
       host
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     # Should be enough
     maxItems: 255
@@ -112,8 +112,7 @@ properties:
     description: |
       Array of UDMA rflow resource subtypes for resource allocation for this
       host
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     # Should be enough
     maxItems: 255
@@ -131,6 +130,21 @@ required:
   - ti,sci-rm-range-rchan
   - ti,sci-rm-range-rflow
 
+if:
+  properties:
+    "#dma-cells":
+      const: 2
+then:
+  properties:
+    ti,udma-atype:
+      description: ATYPE value which should be used by non slave channels
+      $ref: /schemas/types.yaml#/definitions/uint32
+
+  required:
+    - ti,udma-atype
+
+unevaluatedProperties: false
+
 examples:
   - |+
     cbass_main {
diff --git a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
deleted file mode 100644
index b12388dc7eac..000000000000
--- a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-UniPhier Media IO DMA controller
-
-This works as an external DMA engine for SD/eMMC controllers etc.
-found in UniPhier LD4, Pro4, sLD8 SoCs.
-
-Required properties:
-- compatible: should be "socionext,uniphier-mio-dmac".
-- reg: offset and length of the register set for the device.
-- interrupts: a list of interrupt specifiers associated with the DMA channels.
-- clocks: a single clock specifier.
-- #dma-cells: should be <1>. The single cell represents the channel index.
-
-Example:
-	dmac: dma-controller@5a000000 {
-		compatible = "socionext,uniphier-mio-dmac";
-		reg = <0x5a000000 0x1000>;
-		interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
-			     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
-		clocks = <&mio_clk 7>;
-		#dma-cells = <1>;
-	};
-
-Note:
-In the example above, "interrupts = <0 68 4>, <0 68 4>, ..." is not a typo.
-The first two channels share a single interrupt line.
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index 325aca52cd43..d1700a5c36bf 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -110,7 +110,11 @@ axi_vdma_0: axivdma@40030000 {
 Required properties:
 - dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
 	where Channel ID is '0' for write/tx and '1' for read/rx
-	channel.
+	channel. For MCMDA, MM2S channel(write/tx) ID start from
+	'0' and is in [0-15] range. S2MM channel(read/rx) ID start
+	from '16' and is in [16-31] range. These channels ID are
+	fixed irrespective of IP configuration.
+
 - dma-names: a list of DMA channel names, one per "dmas" entry
 
 Example:
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
new file mode 100644
index 000000000000..c0a1408b12ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DMA Engine
+
+description: |
+  The Xilinx ZynqMP DMA engine supports memory to memory transfers,
+  memory to device and device to memory transfers. It also has flow
+  control and rate control support for slave/peripheral dma access.
+
+maintainers:
+  - Michael Tretter <m.tretter@pengutronix.de>
+
+allOf:
+  - $ref: "../dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 1
+
+  compatible:
+    const: xlnx,zynqmp-dma-1.0
+
+  reg:
+    description: memory map for gdma/adma module access
+    maxItems: 1
+
+  interrupts:
+    description: DMA channel interrupt
+    maxItems: 1
+
+  clocks:
+    description: input clocks
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk_main
+      - const: clk_apb
+
+  xlnx,bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 64
+      - 128
+    description: AXI bus width in bits
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  dma-coherent:
+    description: present if dma operations are coherent
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+
+    fpd_dma_chan1: dma-controller@fd500000 {
+      compatible = "xlnx,zynqmp-dma-1.0";
+      reg = <0xfd500000 0x1000>;
+      interrupt-parent = <&gic>;
+      interrupts = <0 117 0x4>;
+      #dma-cells = <1>;
+      clock-names = "clk_main", "clk_apb";
+      clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+      xlnx,bus-width = <128>;
+      dma-coherent;
+    };
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
new file mode 100644
index 000000000000..2a595b18ff6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dpdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DisplayPort DMA Controller Device Tree Bindings
+
+description: |
+  These bindings describe the DMA engine included in the Xilinx ZynqMP
+  DisplayPort Subsystem. The DMA engine supports up to 6 DMA channels (3
+  channels for a video stream, 1 channel for a graphics stream, and 2 channels
+  for an audio stream).
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+allOf:
+  - $ref: "../dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 1
+    description: |
+      The cell is the DMA channel ID (see dt-bindings/dma/xlnx-zynqmp-dpdma.h
+      for a list of channel IDs).
+
+  compatible:
+    const: xlnx,zynqmp-dpdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: The AXI clock
+    maxItems: 1
+
+  clock-names:
+    const: axi_clk
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dma: dma-controller@fd4c0000 {
+      compatible = "xlnx,zynqmp-dpdma";
+      reg = <0xfd4c0000 0x1000>;
+      interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-parent = <&gic>;
+      clocks = <&dpdma_clk>;
+      clock-names = "axi_clk";
+      #dma-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
deleted file mode 100644
index 07a5a7aa9ea0..000000000000
--- a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Xilinx ZynqMP DMA engine, it does support memory to memory transfers,
-memory to device and device to memory transfers. It also has flow
-control and rate control support for slave/peripheral dma access.
-
-Required properties:
-- compatible		: Should be "xlnx,zynqmp-dma-1.0"
-- reg			: Memory map for gdma/adma module access.
-- interrupts		: Should contain DMA channel interrupt.
-- xlnx,bus-width	: Axi buswidth in bits. Should contain 128 or 64
-- clock-names		: List of input clocks "clk_main", "clk_apb"
-			  (see clock bindings for details)
-
-Optional properties:
-- dma-coherent		: Present if dma operations are coherent.
-
-Example:
-++++++++
-fpd_dma_chan1: dma@fd500000 {
-	compatible = "xlnx,zynqmp-dma-1.0";
-	reg = <0x0 0xFD500000 0x1000>;
-	interrupt-parent = <&gic>;
-	interrupts = <0 117 4>;
-	clock-names = "clk_main", "clk_apb";
-	xlnx,bus-width = <128>;
-	dma-coherent;
-};
diff --git a/Documentation/devicetree/bindings/dma/zxdma.txt b/Documentation/devicetree/bindings/dma/zxdma.txt
deleted file mode 100644
index 0ab80f69e566..000000000000
--- a/Documentation/devicetree/bindings/dma/zxdma.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* ZTE ZX296702 DMA controller
-
-Required properties:
-- compatible: Should be "zte,zx296702-dma"
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain one interrupt shared by all channel
-- #dma-cells: see dma.txt, should be 1, para number
-- dma-channels: physical channels supported
-- dma-requests: virtual channels supported, each virtual channel
-		have specific request line
-- clocks: clock required
-
-Example:
-
-Controller:
-	dma: dma-controller@09c00000{
-		compatible = "zte,zx296702-dma";
-		reg = <0x09c00000 0x1000>;
-		clocks = <&topclk ZX296702_DMA_ACLK>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		#dma-cells = <1>;
-		dma-channels = <24>;
-		dma-requests = <24>;
-	};
-
-Client:
-Use specific request line passing from dmax
-For example, spdif0 tx channel request line is 4
-	spdif0: spdif0@b004000 {
-		#sound-dai-cells = <0>;
-		compatible = "zte,zx296702-spdif";
-		reg = <0x0b004000 0x1000>;
-		clocks = <&lsp0clk ZX296702_SPDIF0_DIV>;
-		clock-names = "tx";
-		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		dmas = <&dma 4>;
-		dma-names = "tx";
-	}
diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
index f04870d84542..9af40da5688e 100644
--- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
+++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
@@ -8,6 +8,7 @@ title: NXP i.MX8 DSP core
 
 maintainers:
   - Daniel Baluta <daniel.baluta@nxp.com>
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
 
 description: |
   Some boards from i.MX8 family contain a DSP core used for
@@ -17,46 +18,69 @@ properties:
   compatible:
     enum:
       - fsl,imx8qxp-dsp
+      - fsl,imx8qm-dsp
+      - fsl,imx8mp-dsp
+      - fsl,imx8ulp-dsp
+      - fsl,imx8qxp-hifi4
+      - fsl,imx8qm-hifi4
+      - fsl,imx8mp-hifi4
+      - fsl,imx8ulp-hifi4
 
   reg:
-    description: Should contain register location and length
+    maxItems: 1
 
   clocks:
     items:
       - description: ipg clock
       - description: ocram clock
       - description: core clock
+      - description: debug interface clock
+      - description: message unit clock
+    minItems: 3
 
   clock-names:
     items:
       - const: ipg
       - const: ocram
       - const: core
+      - const: debug
+      - const: mu
+    minItems: 3
 
   power-domains:
     description:
       List of phandle and PM domain specifier as documented in
       Documentation/devicetree/bindings/power/power_domain.txt
+    minItems: 1
     maxItems: 4
 
   mboxes:
     description:
       List of <&phandle type channel> - 2 channels for TXDB, 2 channels for RXDB
+      or - 1 channel for TX, 1 channel for RX, 1 channel for RXDB
       (see mailbox/fsl,mu.txt)
+    minItems: 3
     maxItems: 4
 
   mbox-names:
-    items:
-      - const: txdb0
-      - const: txdb1
-      - const: rxdb0
-      - const: rxdb1
+    minItems: 3
+    maxItems: 4
 
   memory-region:
     description:
-       phandle to a node describing reserved memory (System RAM memory)
-       used by DSP (see bindings/reserved-memory/reserved-memory.txt)
-    maxItems: 1
+      phandle to a node describing reserved memory (System RAM memory)
+      used by DSP (see bindings/reserved-memory/reserved-memory.txt)
+    minItems: 1
+    maxItems: 4
+
+  firmware-name:
+    description: |
+      Default name of the firmware to load to the remote processor.
+
+  fsl,dsp-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to syscon block which provide access for processor enablement
 
 required:
   - compatible
@@ -68,6 +92,60 @@ required:
   - mbox-names
   - memory-region
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-dsp
+              - fsl,imx8qm-dsp
+              - fsl,imx8qxp-hifi4
+              - fsl,imx8qm-hifi4
+    then:
+      properties:
+        power-domains:
+          minItems: 4
+    else:
+      properties:
+        power-domains:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-hifi4
+              - fsl,imx8qm-hifi4
+              - fsl,imx8mp-hifi4
+              - fsl,imx8ulp-hifi4
+    then:
+      properties:
+        memory-region:
+          minItems: 4
+        mboxes:
+          maxItems: 3
+        mbox-names:
+          items:
+            - const: tx
+            - const: rx
+            - const: rxdb
+    else:
+      properties:
+        memory-region:
+          maxItems: 1
+        mboxes:
+          minItems: 4
+        mbox-names:
+          items:
+            - const: txdb0
+            - const: txdb1
+            - const: rxdb0
+            - const: rxdb1
+
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/firmware/imx/rsrc.h>
@@ -87,3 +165,41 @@ examples:
         mboxes = <&lsio_mu13 2 0>, <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>;
         memory-region = <&dsp_reserved>;
     };
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    dsp_reserved: dsp@92400000 {
+      reg = <0x92400000 0x1000000>;
+      no-map;
+    };
+    dsp_vdev0vring0: vdev0vring0@942f0000 {
+      reg = <0x942f0000 0x8000>;
+      no-map;
+    };
+    dsp_vdev0vring1: vdev0vring1@942f8000 {
+      reg = <0x942f8000 0x8000>;
+      no-map;
+    };
+    dsp_vdev0buffer: vdev0buffer@94300000 {
+      compatible = "shared-dma-pool";
+      reg = <0x94300000 0x100000>;
+      no-map;
+    };
+
+    dsp: dsp@3b6e8000 {
+      compatible = "fsl,imx8mp-hifi4";
+      reg = <0x3b6e8000 0x88000>;
+      clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+               <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG>,
+               <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+               <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT>;
+      clock-names = "ipg", "ocram", "core", "debug";
+      firmware-name = "imx/dsp/hifi4.bin";
+      power-domains = <&audiomix_pd>;
+      mbox-names = "tx", "rx", "rxdb";
+      mboxes = <&mu2 0 0>,
+               <&mu2 1 0>,
+               <&mu2 3 0>;
+      memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+                      <&dsp_vdev0vring1>, <&dsp_reserved>;
+      fsl,dsp-ctrl = <&audio_blk_ctrl>;
+    };
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
new file mode 100644
index 000000000000..3e63f79890b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dsp/mediatek,mt8186-dsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek mt8186 DSP core
+
+maintainers:
+  - Tinghan Shen <tinghan.shen@mediatek.com>
+
+description: |
+  MediaTek mt8186 SoC contains a DSP core used for
+  advanced pre- and post- audio processing.
+
+properties:
+  compatible:
+    const: mediatek,mt8186-dsp
+
+  reg:
+    items:
+      - description: Address and size of the DSP config registers
+      - description: Address and size of the DSP SRAM
+      - description: Address and size of the DSP secure registers
+      - description: Address and size of the DSP bus registers
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: sram
+      - const: sec
+      - const: bus
+
+  clocks:
+    items:
+      - description: mux for audio dsp clock
+      - description: mux for audio dsp local bus
+
+  clock-names:
+    items:
+      - const: audiodsp
+      - const: adsp_bus
+
+  power-domains:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  memory-region:
+    items:
+      - description: dma buffer between host and DSP.
+      - description: DSP system memory.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - power-domains
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8186-clk.h>
+    dsp@10680000 {
+        compatible = "mediatek,mt8186-dsp";
+        reg = <0x10680000 0x2000>,
+              <0x10800000 0x100000>,
+              <0x1068b000 0x100>,
+              <0x1068f000 0x1000>;
+        reg-names = "cfg", "sram", "sec", "bus";
+        clocks = <&topckgen CLK_TOP_AUDIODSP>,
+                 <&topckgen CLK_TOP_ADSP_BUS>;
+        clock-names = "audiodsp",
+                      "adsp_bus";
+        power-domains = <&spm 6>;
+        mbox-names = "rx", "tx";
+        mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+    };
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
new file mode 100644
index 000000000000..ca8d8661f872
--- /dev/null
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dsp/mediatek,mt8195-dsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek mt8195 DSP core
+
+maintainers:
+  - YC Hung <yc.hung@mediatek.com>
+
+description: |
+  Some boards from mt8195 contain a DSP core used for
+  advanced pre- and post- audio processing.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-dsp
+
+  reg:
+    items:
+      - description: Address and size of the DSP Cfg registers
+      - description: Address and size of the DSP SRAM
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: sram
+
+  clocks:
+    items:
+      - description: mux for audio dsp clock
+      - description: 26M clock
+      - description: mux for audio dsp local bus
+      - description: default audio dsp local bus clock source
+      - description: clock gate for audio dsp clock
+      - description: mux for audio dsp access external bus
+
+  clock-names:
+    items:
+      - const: adsp_sel
+      - const: clk26m_ck
+      - const: audio_local_bus
+      - const: mainpll_d7_d2
+      - const: scp_adsp_audiodsp
+      - const: audio_h
+
+  power-domains:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  memory-region:
+    items:
+      - description: dma buffer between host and DSP.
+      - description: DSP system memory.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - memory-region
+  - power-domains
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    dsp@10803000 {
+       compatible =  "mediatek,mt8195-dsp";
+       reg = <0x10803000  0x1000>,
+             <0x10840000  0x40000>;
+       reg-names = "cfg", "sram";
+       clocks = <&topckgen 10>, //CLK_TOP_ADSP
+                <&clk26m>,
+                <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS
+                <&topckgen 136>, //CLK_TOP_MAINPLL_D7_D2
+                <&scp_adsp 0>, //CLK_SCP_ADSP_AUDIODSP
+                <&topckgen 34>; //CLK_TOP_AUDIO_H
+       clock-names = "adsp_sel",
+                     "clk26m_ck",
+                     "audio_local_bus",
+                     "mainpll_d7_d2",
+                     "scp_adsp_audiodsp",
+                     "audio_h";
+       memory-region = <&adsp_dma_mem_reserved>,
+                       <&adsp_mem_reserved>;
+       power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP
+       mbox-names = "rx", "tx";
+       mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+    };
diff --git a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
new file mode 100644
index 000000000000..1dcb85a02a76
--- /dev/null
+++ b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dvfs/performance-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic performance domains
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+
+description: |+
+  This binding is intended for performance management of groups of devices or
+  CPUs that run in the same performance domain. Performance domains must not
+  be confused with power domains. A performance domain is defined by a set
+  of devices that always have to run at the same performance level. For a given
+  performance domain, there is a single point of control that affects all the
+  devices in the domain, making it impossible to set the performance level of
+  an individual device in the domain independently from other devices in
+  that domain. For example, a set of CPUs that share a voltage domain, and
+  have a common frequency control, is said to be in the same performance
+  domain.
+
+  This device tree binding can be used to bind performance domain consumer
+  devices with their performance domains provided by performance domain
+  providers. A performance domain provider can be represented by any node in
+  the device tree and can provide one or more performance domains. A consumer
+  node can refer to the provider by a phandle and a set of phandle arguments
+  (so called performance domain specifiers) of length specified by the
+  \#performance-domain-cells property in the performance domain provider node.
+
+select: true
+
+properties:
+  "#performance-domain-cells":
+    description:
+      Number of cells in a performance domain specifier. Typically 0 for nodes
+      representing a single performance domain and 1 for nodes providing
+      multiple performance domains (e.g. performance controllers), but can be
+      any value as specified by device tree binding documentation of particular
+      provider.
+    enum: [ 0, 1 ]
+
+  performance-domains:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    description:
+      A phandle and performance domain specifier as defined by bindings of the
+      performance controller/provider specified by phandle.
+
+additionalProperties: true
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        performance: performance-controller@11bc00 {
+            compatible = "mediatek,cpufreq-hw";
+            reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+
+            #performance-domain-cells = <1>;
+        };
+    };
+
+    // The node above defines a performance controller that is a performance
+    // domain provider and expects one cell as its phandle argument.
+
+    cpus {
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x0>;
+            performance-domains = <&performance 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml
new file mode 100644
index 000000000000..4cfc3a187004
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/amazon,al-mc-edac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amazon's Annapurna Labs Memory Controller EDAC
+
+maintainers:
+  - Talel Shenhar <talel@amazon.com>
+  - Talel Shenhar <talelshenhar@gmail.com>
+
+description: |
+  EDAC node is defined to describe on-chip error detection and correction for
+  Amazon's Annapurna Labs Memory Controller.
+
+properties:
+
+  compatible:
+    const: amazon,al-mc-edac
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: uncorrectable error interrupt
+      - description: correctable error interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: ue
+      - const: ce
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        edac@f0080000 {
+          #address-cells = <2>;
+          #size-cells = <2>;
+          compatible = "amazon,al-mc-edac";
+          reg = <0x0 0xf0080000 0x0 0x00010000>;
+          interrupt-parent = <&amazon_al_system_fabric>;
+          interrupt-names = "ue";
+          interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
index 6a0f3d90d682..8ca9e0a049d8 100644
--- a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
+++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
@@ -1,6 +1,6 @@
-Aspeed AST2500 SoC EDAC node
+Aspeed BMC SoC EDAC node
 
-The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error
+The Aspeed BMC SoC supports DDR3 and DDR4 memory with and without ECC (error
 correction check).
 
 The memory controller supports SECDED (single bit error correction, double bit
@@ -11,7 +11,10 @@ Note, the bootloader must configure ECC mode in the memory controller.
 
 
 Required properties:
-- compatible: should be "aspeed,ast2500-sdram-edac"
+- compatible: should be one of
+	- "aspeed,ast2400-sdram-edac"
+	- "aspeed,ast2500-sdram-edac"
+	- "aspeed,ast2600-sdram-edac"
 - reg:        sdram controller register set should be <0x1e6e0000 0x174>
 - interrupts: should be AVIC interrupt #0
 
diff --git a/Documentation/devicetree/bindings/edac/dmc-520.yaml b/Documentation/devicetree/bindings/edac/dmc-520.yaml
new file mode 100644
index 000000000000..3b6842e92d1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/dmc-520.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/dmc-520.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM DMC-520 EDAC bindings
+
+maintainers:
+  - Lei Wang <lewan@microsoft.com>
+
+description: |+
+  DMC-520 node is defined to describe DRAM error detection and correction.
+
+  https://static.docs.arm.com/100000/0200/corelink_dmc520_trm_100000_0200_01_en.pdf
+
+properties:
+  compatible:
+    items:
+      - const: brcm,dmc-520
+      - const: arm,dmc-520
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 10
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 10
+    items:
+      enum:
+        - ram_ecc_errc
+        - ram_ecc_errd
+        - dram_ecc_errc
+        - dram_ecc_errd
+        - failed_access
+        - failed_prog
+        - link_err
+        - temperature_event
+        - arch_fsm
+        - phy_request
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    dmc0: dmc@200000 {
+        compatible = "brcm,dmc-520", "arm,dmc-520";
+        reg = <0x200000 0x80000>;
+        interrupts = <0x0 0x349 0x4>, <0x0 0x34B 0x4>;
+        interrupt-names = "dram_ecc_errc", "dram_ecc_errd";
+    };
diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
deleted file mode 100644
index c94acbb8cb0c..000000000000
--- a/Documentation/devicetree/bindings/eeprom/at24.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has been moved to at24.yaml.
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index 0f6d8db18d6c..d14e0accbda8 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -32,9 +32,8 @@ properties:
     oneOf:
       - allOf:
           - minItems: 1
-            maxItems: 2
             items:
-              - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|mac)[0-9]+|spd)$"
+              - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$"
               - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
           - oneOf:
               - items:
@@ -88,6 +87,10 @@ properties:
               - items:
                   pattern: cs1024$
               - items:
+                  pattern: c1025$
+              - items:
+                  pattern: cs1025$
+              - items:
                   pattern: c2048$
               - items:
                   pattern: cs2048$
@@ -96,14 +99,20 @@ properties:
       # These are special cases that don't conform to the above pattern.
       # Each requires a standard at24 model as fallback.
       - items:
-          - const: rohm,br24t01
+          - enum:
+              - rohm,br24g01
+              - rohm,br24t01
           - const: atmel,24c01
       - items:
-          - const: nxp,se97b
+          - enum:
+              - nxp,se97b
+              - renesas,r1ex24002
           - const: atmel,24c02
       - items:
-          - const: renesas,r1ex24002
-          - const: atmel,24c02
+          - enum:
+              - onnn,cat24c04
+              - onnn,cat24c05
+          - const: atmel,24c04
       - items:
           - const: renesas,r1ex24016
           - const: atmel,24c16
@@ -111,25 +120,29 @@ properties:
           - const: giantec,gt24c32a
           - const: atmel,24c32
       - items:
-          - const: renesas,r1ex24128
+          - enum:
+              - renesas,r1ex24128
+              - samsung,s524ad0xd1
           - const: atmel,24c128
 
+  label:
+    description: Descriptive name of the EEPROM.
+
   reg:
     maxItems: 1
 
   pagesize:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       The length of the pagesize for writing. Please consult the
       manual of your device, that value varies a lot. A wrong value
       may result in data loss! If not specified, a safety value of
       '1' is used which will be very slow.
-    enum: [ 1, 8, 16, 32, 64, 128, 258 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 8, 16, 32, 64, 128, 256]
     default: 1
 
   read-only:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Disables writes to the eeprom.
 
@@ -139,7 +152,7 @@ properties:
       Total eeprom size in bytes.
 
   no-read-rollover:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Indicates that the multi-address eeprom does not automatically roll
       over reads to the next slave address. Please consult the manual of
@@ -148,18 +161,16 @@ properties:
   wp-gpios: true
 
   address-width:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Number of address bits.
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 8
     enum: [ 8, 16 ]
 
   num-addresses:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Total number of i2c slave addresses this device takes.
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 1
     minimum: 1
     maximum: 8
@@ -172,6 +183,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/eeprom/at25.txt b/Documentation/devicetree/bindings/eeprom/at25.txt
deleted file mode 100644
index fcacd97abd0a..000000000000
--- a/Documentation/devicetree/bindings/eeprom/at25.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-EEPROMs (SPI) compatible with Atmel at25.
-
-Required properties:
-- compatible : Should be "<vendor>,<type>", and generic value "atmel,at25".
-  Example "<vendor>,<type>" values:
-    "anvo,anv32e61w"
-    "microchip,25lc040"
-    "st,m95m02"
-    "st,m95256"
-
-- reg : chip select number
-- spi-max-frequency : max spi frequency to use
-- pagesize : size of the eeprom page
-- size : total eeprom size in bytes
-- address-width : number of address bits (one of 8, 9, 16, or 24).
-  For 9 bits, the MSB of the address is sent as bit 3 of the instruction
-  byte, before the address byte.
-
-Optional properties:
-- spi-cpha : SPI shifted clock phase, as per spi-bus bindings.
-- spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
-- read-only : this parameter-less property disables writes to the eeprom
-- wp-gpios : GPIO to which the write-protect pin of the chip is connected
-
-Obsolete legacy properties can be used in place of "size", "pagesize",
-"address-width", and "read-only":
-- at25,byte-len : total eeprom size in bytes
-- at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h
-- at25,page-size : size of the eeprom page
-
-Additional compatible properties are also allowed.
-
-Example:
-	eeprom@0 {
-		compatible = "st,m95256", "atmel,at25";
-		reg = <0>
-		spi-max-frequency = <5000000>;
-		spi-cpha;
-		spi-cpol;
-		wp-gpios = <&gpio1 3 0>;
-
-		pagesize = <64>;
-		size = <32768>;
-		address-width = <16>;
-	};
diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml
new file mode 100644
index 000000000000..8b1c997caac1
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/at25.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/eeprom/at25.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: SPI EEPROMs or FRAMs compatible with Atmel's AT25
+
+maintainers:
+  - Christian Eggers <ceggers@arri.de>
+
+properties:
+  $nodename:
+    anyOf:
+      - pattern: "^eeprom@[0-9a-f]{1,2}$"
+      - pattern: "^fram@[0-9a-f]{1,2}$"
+
+  # There are multiple known vendors who manufacture EEPROM chips compatible
+  # with Atmel's AT25. The compatible string requires two items where the
+  # 'vendor' and 'model' parts of the first are the actual chip and the second
+  # item is fixed to "atmel,at25". Some existing bindings only have the
+  # "atmel,at25" part and should be fixed by somebody who knows vendor and
+  # product.
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - anvo,anv32e61w
+              - atmel,at25256B
+              - fujitsu,mb85rs1mt
+              - fujitsu,mb85rs64
+              - microchip,at25160bn
+              - microchip,25lc040
+              - st,m95m02
+              - st,m95256
+              - cypress,fm25
+
+          - const: atmel,at25
+
+      # Please don't use this alternative for new bindings.
+      - items:
+          - const: atmel,at25
+
+  reg:
+    maxItems: 1
+
+  pagesize:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072]
+    description:
+      Size of the eeprom page. FRAMs don't have pages.
+
+  size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Total eeprom size in bytes.
+
+  address-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 9, 16, 24 ]
+    description:
+      Number of address bits.
+      For 9 bits, the MSB of the address is sent as bit 3 of the instruction
+      byte, before the address byte.
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  read-only:
+    description:
+      Disable writes to the eeprom.
+    type: boolean
+
+  wp-gpios:
+    maxItems: 1
+    description:
+      GPIO to which the write-protect pin of the chip is connected.
+
+  # Deprecated: at25,byte-len, at25,addr-mode, at25,page-size
+  at25,byte-len:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Total eeprom size in bytes. Deprecated, use "size" property instead.
+    deprecated: true
+
+  at25,addr-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Addr-mode flags, as defined in include/linux/spi/eeprom.h.
+      Deprecated, use "address-width" property instead.
+    deprecated: true
+
+  at25,page-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the eeprom page. Deprecated, use "pagesize" property instead.
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: cypress,fm25
+    then:
+      required:
+        - pagesize
+        - size
+        - address-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@0 {
+            compatible = "st,m95256", "atmel,at25";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpha;
+            spi-cpol;
+            wp-gpios = <&gpio1 3 0>;
+
+            pagesize = <64>;
+            size = <32768>;
+            address-width = <16>;
+        };
+
+        fram@1 {
+            compatible = "cypress,fm25", "atmel,at25";
+            reg = <1>;
+            spi-max-frequency = <40000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml b/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml
new file mode 100644
index 000000000000..0c2f5ddb79c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/eeprom/microchip,93lc46b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip 93xx46 SPI compatible EEPROM family dt bindings
+
+maintainers:
+  - Cory Tusar <cory.tusar@pid1solutions.com>
+
+properties:
+  compatible:
+    enum:
+      - atmel,at93c46
+      - atmel,at93c46d
+      - atmel,at93c56
+      - atmel,at93c66
+      - eeprom-93xx46
+      - microchip,93lc46b
+
+  data-size:
+    description: number of data bits per word
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+
+  reg:
+    description: chip select of EEPROM
+    maxItems: 1
+
+  read-only:
+    description:
+      parameter-less property which disables writes to the EEPROM
+    type: boolean
+
+  select-gpios:
+    description:
+      specifies the GPIO that needs to be asserted prior to each access
+      of EEPROM (e.g. for SPI bus multiplexing)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - data-size
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      eeprom@0 {
+        compatible = "eeprom-93xx46";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cs-high;
+        data-size = <8>;
+        select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
index 4ddcf709cc3c..8e1a8b19d429 100644
--- a/Documentation/devicetree/bindings/example-schema.yaml
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -7,9 +7,9 @@
 
 # $id is a unique identifier based on the filename. There may or may not be a
 # file present at the URL.
-$id: "http://devicetree.org/schemas/example-schema.yaml#"
+$id: http://devicetree.org/schemas/example-schema.yaml#
 # $schema is the meta-schema this schema should be validated with.
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: An example schema annotated with jsonschema details
 
@@ -81,6 +81,8 @@ properties:
     maxItems: 1
     description: bus clock. A description is only needed for a single item if
       there's something unique to add.
+      The items should have a fixed order, so pattern matching names are
+      discouraged.
 
   clock-names:
     items:
@@ -89,7 +91,6 @@ properties:
   interrupts:
     # Either 1 or 2 interrupts can be present
     minItems: 1
-    maxItems: 2
     items:
       - description: tx or combined interrupt
       - description: rx interrupt
@@ -97,11 +98,12 @@ properties:
       A variable number of interrupts warrants a description of what conditions
       affect the number of interrupts. Otherwise, descriptions on standard
       properties are not necessary.
+      The items should have a fixed order, so pattern matching names are
+      discouraged.
 
   interrupt-names:
     # minItems must be specified here because the default would be 2
     minItems: 1
-    maxItems: 2
     items:
       - const: tx irq
       - const: rx irq
@@ -117,7 +119,7 @@ properties:
     # valid for this binding.
 
   clock-frequency:
-    # The type is set in the core schema. Per device schema only need to set
+    # The type is set in the core schema. Per-device schema only need to set
     # constraints on the possible values.
     minimum: 100
     maximum: 400000
@@ -131,40 +133,45 @@ properties:
   # *-supply is always a single phandle, so nothing more to define.
   foo-supply: true
 
-  # Vendor specific properties
+  # Vendor-specific properties
   #
-  # Vendor specific properties have slightly different schema requirements than
+  # Vendor-specific properties have slightly different schema requirements than
   # common properties. They must have at least a type definition and
   # 'description'.
   vendor,int-property:
-    description: Vendor specific properties must have a description
-    # 'allOf' is the json-schema way of subclassing a schema. Here the base
-    # type schema is referenced and then additional constraints on the values
-    # are added.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [2, 4, 6, 8, 10]
+    description: Vendor-specific properties must have a description
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 4, 6, 8, 10]
 
   vendor,bool-property:
-    description: Vendor specific properties must have a description. Boolean
+    description: Vendor-specific properties must have a description. Boolean
       properties are one case where the json-schema 'type' keyword can be used
       directly.
     type: boolean
 
   vendor,string-array-property:
-    description: Vendor specific properties should reference a type in the
+    description: Vendor-specific properties should reference a type in the
       core schema.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - items:
-          - enum: [ foo, bar ]
-          - enum: [ baz, boo ]
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - enum: [foo, bar]
+      - enum: [baz, boo]
 
   vendor,property-in-standard-units-microvolt:
-    description: Vendor specific properties having a standard unit suffix
+    description: Vendor-specific properties having a standard unit suffix
       don't need a type.
     enum: [ 100, 200, 300 ]
 
+  vendor,int-array-variable-length-and-constrained-values:
+    description: Array might define what type of elements might be used (e.g.
+      their range).
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 3
+    items:
+      minimum: 0
+      maximum: 8
+
   child-node:
     description: Child nodes are just another property from a json-schema
       perspective.
@@ -182,10 +189,10 @@ properties:
 dependencies:
   # 'vendor,bool-property' is only allowed when 'vendor,string-array-property'
   # is present
-  vendor,bool-property: [ vendor,string-array-property ]
+  vendor,bool-property: [ 'vendor,string-array-property' ]
   # Expressing 2 properties in both orders means all of the set of properties
   # must be present or none of them.
-  vendor,string-array-property: [ vendor,bool-property ]
+  vendor,string-array-property: [ 'vendor,bool-property' ]
 
 required:
   - compatible
@@ -201,14 +208,28 @@ required:
 #
 # If the conditionals become too unweldy, then it may be better to just split
 # the binding into separate schema documents.
-if:
-  properties:
-    compatible:
-      contains:
-        const: vendor,soc2-ip
-then:
-  required:
-    - foo-supply
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: vendor,soc2-ip
+    then:
+      required:
+        - foo-supply
+    else:
+      # If otherwise the property is not allowed:
+      properties:
+        foo-supply: false
+  # Altering schema depending on presence of properties is usually done by
+  # dependencies (see above), however some adjustments might require if:
+  - if:
+      required:
+        - vendor,bool-property
+    then:
+      properties:
+        vendor,int-property:
+          enum: [2, 4, 6]
 
 # Ideally, the schema should have this line otherwise any other properties
 # present are allowed. There's a few common properties such as 'status' and
@@ -216,6 +237,9 @@ then:
 #
 # This can't be used in cases where another schema is referenced
 # (i.e. allOf: [{$ref: ...}]).
+# If and only if another schema is referenced and arbitrary children nodes can
+# appear, "unevaluatedProperties: false" could be used.  A typical example is
+# an I2C controller where no name pattern matching for children can be added.
 additionalProperties: false
 
 examples:
@@ -225,13 +249,13 @@ examples:
   # be overridden or an appropriate parent bus node should be shown (such as on
   # i2c buses).
   #
-  # Any includes used have to be explicitly included.
+  # Any includes used have to be explicitly included. Use 4-space indentation.
   - |
     node@1000 {
-          compatible = "vendor,soc4-ip", "vendor,soc1-ip";
-          reg = <0x1000 0x80>,
-                <0x3000 0x80>;
-          reg-names = "core", "aux";
-          interrupts = <10>;
-          interrupt-controller;
+        compatible = "vendor,soc4-ip", "vendor,soc1-ip";
+        reg = <0x1000 0x80>,
+              <0x3000 0x80>;
+        reg-names = "core", "aux";
+        interrupts = <10>;
+        interrupt-controller;
     };
diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
deleted file mode 100644
index 208daaff0be4..000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-Cirrus Logic Arizona class audio SoCs
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-This document lists Extcon specific bindings, see the primary binding document:
-  ../mfd/arizona.txt
-
-Optional properties:
-
-  - wlf,hpdet-channel : Headphone detection channel.
-    ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL
-    ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR
-    If this node is not mentioned or if the value is unknown, then
-    headphone detection mode is set to HPDETL.
-
-  - wlf,use-jd2 : Use the additional JD input along with JD1 for dual pin jack
-    detection.
-  - wlf,use-jd2-nopull : Internal pull on JD2 is disabled when used for
-    jack detection.
-  - wlf,jd-invert : Invert the polarity of the jack detection switch
-
-  - wlf,micd-software-compare : Use a software comparison to determine mic
-    presence
-  - wlf,micd-detect-debounce : Additional software microphone detection
-    debounce specified in milliseconds.
-  - wlf,micd-pol-gpio : GPIO specifier for the GPIO controlling the headset
-    polarity if one exists.
-  - wlf,micd-bias-start-time : Time allowed for MICBIAS to startup prior to
-    performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX
-    defines.
-  - wlf,micd-rate : Delay between successive microphone detection measurements,
-    specified as per the ARIZONA_MICD_TIME_XXX defines.
-  - wlf,micd-dbtime : Microphone detection hardware debounces specified as the
-    number of measurements to take, valid values being 2 and 4.
-  - wlf,micd-timeout-ms : Timeout for microphone detection, specified in
-    milliseconds.
-  - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone
-    detection.
-  - wlf,micd-configs : Headset polarity configurations (generally used for
-    detection of CTIA / OMTP headsets), the field can be of variable length
-    but should always be a multiple of 3 cells long, each three cell group
-    represents one polarity configuration.
-    The first cell defines the accessory detection pin, zero will use MICDET1
-    and all other values will use MICDET2.
-    The second cell represents the MICBIAS to be used.
-    The third cell represents the value of the micd-pol-gpio pin.
-
-  - wlf,gpsw : Settings for the general purpose switch, set as one of the
-    ARIZONA_GPSW_XXX defines.
-
-Example:
-
-codec: wm8280@0 {
-	compatible = "wlf,wm8280";
-	reg = <0>;
-	...
-
-	wlf,use-jd2;
-	wlf,use-jd2-nopull;
-	wlf,jd-invert;
-
-	wlf,micd-software-compare;
-	wlf,micd-detect-debounce = <0>;
-	wlf,micd-pol-gpio = <&codec 2 0>;
-	wlf,micd-rate = <ARIZONA_MICD_TIME_8MS>;
-	wlf,micd-dbtime = <4>;
-	wlf,micd-timeout-ms = <100>;
-	wlf,micd-force-micbias;
-	wlf,micd-configs = <
-		0 1 0 /* MICDET1 MICBIAS1 GPIO=low */
-		1 2 1 /* MICDET2 MICBIAS2 GPIO=high */
-	>;
-
-	wlf,gpsw = <ARIZONA_GPSW_OPEN>;
-};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
deleted file mode 100644
index 624bd76f468e..000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-FAIRCHILD SEMICONDUCTOR FSA9480 MICROUSB SWITCH
-
-The FSA9480 is a USB port accessory detector and switch. The FSA9480 is fully
-controlled using I2C and enables USB data, stereo and mono audio, video,
-microphone, and UART data to use a common connector port.
-
-Required properties:
- - compatible : Must be one of
-   "fcs,fsa9480"
-   "fcs,fsa880"
- - reg : Specifies i2c slave address. Must be 0x25.
- - interrupts : Should contain one entry specifying interrupt signal of
-   interrupt parent to which interrupt pin of the chip is connected.
-
- Example:
-	musb@25 {
-		compatible = "fcs,fsa9480";
-		reg = <0x25>;
-		interrupt-parent = <&gph2>;
-		interrupts = <7 0>;
-	};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt
deleted file mode 100644
index 936fbdf12815..000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* PTN5150 CC (Configuration Channel) Logic device
-
-PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
-connector application with CC control logic detection and indication functions.
-It is interfaced to the host controller using an I2C interface.
-
-Required properties:
-- compatible: should be "nxp,ptn5150"
-- reg: specifies the I2C slave address of the device
-- int-gpio: should contain a phandle and GPIO specifier for the GPIO pin
-	connected to the PTN5150's INTB pin.
-- vbus-gpio: should contain a phandle and GPIO specifier for the GPIO pin which
-	is used to control VBUS.
-- pinctrl-names : a pinctrl state named "default" must be defined.
-- pinctrl-0 : phandle referencing pin configuration of interrupt and vbus
-	control.
-
-Example:
-	ptn5150@1d {
-		compatible = "nxp,ptn5150";
-		reg = <0x1d>;
-		int-gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>;
-		vbus-gpio = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ptn5150_default>;
-		status = "okay";
-	};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
new file mode 100644
index 000000000000..d5cfa32ea52d
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PTN5150 CC (Configuration Channel) Logic device
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
+  connector application with CC control logic detection and indication
+  functions.  It is interfaced to the host controller using an I2C interface.
+
+properties:
+  compatible:
+    const: nxp,ptn5150
+
+  int-gpios:
+    maxItems: 1
+    deprecated: true
+    description:
+      GPIO pin (input) connected to the PTN5150's INTB pin.
+      Use "interrupts" instead.
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  vbus-gpios:
+    maxItems: 1
+    description:
+      GPIO pin (output) used to control VBUS. If skipped, no such control
+      takes place.
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ptn5150@1d {
+            compatible = "nxp,ptn5150";
+            reg = <0x1d>;
+            interrupt-parent = <&msmgpio>;
+            interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
+            vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
deleted file mode 100644
index fc3888e09549..000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-
-* SM5502 MUIC (Micro-USB Interface Controller) device
-
-The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device
-which can detect the state of external accessory when external accessory is
-attached or detached and button is pressed or released. It is interfaced to
-the host controller using an I2C interface.
-
-Required properties:
-- compatible: Should be "siliconmitus,sm5502-muic"
-- reg: Specifies the I2C slave address of the MUIC block. It should be 0x25
-- interrupts: Interrupt specifiers for detection interrupt sources.
-
-Example:
-
-	sm5502@25 {
-		compatible = "siliconmitus,sm5502-muic";
-		interrupt-parent = <&gpx1>;
-		interrupts = <5 0>;
-		reg = <0x25>;
-	};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt
deleted file mode 100644
index 8e8625c00dfa..000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-ChromeOS EC USB Type-C cable and accessories detection
-
-On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
-able to detect the state of external accessories such as display adapters
-or USB devices when said accessories are attached or detached.
-
-The node for this device must be under a cros-ec node like google,cros-ec-spi
-or google,cros-ec-i2c.
-
-Required properties:
-- compatible:		Should be "google,extcon-usbc-cros-ec".
-- google,usb-port-id:	Specifies the USB port ID to use.
-
-Example:
-	cros-ec@0 {
-		compatible = "google,cros-ec-i2c";
-
-		...
-
-		extcon {
-			compatible = "google,extcon-usbc-cros-ec";
-			google,usb-port-id = <0>;
-		};
-	}
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
new file mode 100644
index 000000000000..2d82b44268db
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-usbc-cros-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC USB Type-C cable and accessories detection
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+
+description: |
+  On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
+  able to detect the state of external accessories such as display adapters
+  or USB devices when said accessories are attached or detached.
+  The node for this device must be under a cros-ec node like google,cros-ec-spi
+  or google,cros-ec-i2c.
+
+properties:
+  compatible:
+    const: google,extcon-usbc-cros-ec
+
+  google,usb-port-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the port id
+    minimum: 0
+    maximum: 255
+
+required:
+  - compatible
+  - google,usb-port-id
+
+additionalProperties: false
+
+examples:
+  - |
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+
+            usbc_extcon0: extcon0 {
+                compatible = "google,extcon-usbc-cros-ec";
+                google,usb-port-id = <0>;
+            };
+
+            usbc_extcon1: extcon1 {
+                compatible = "google,extcon-usbc-cros-ec";
+                google,usb-port-id = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml
new file mode 100644
index 000000000000..71a9f2e5d0dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-usbc-tusb320.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TUSB320 USB Type-C CC Logic controller
+
+maintainers:
+  - Michael Auchter <michael.auchter@ni.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,tusb320
+      - ti,tusb320l
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        tusb320@61 {
+            compatible = "ti,tusb320";
+            reg = <0x61>;
+            interrupt-parent = <&gpio>;
+            interrupts = <27 1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml b/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml
new file mode 100644
index 000000000000..ef6a246a1337
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/fcs,fsa880.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fairchild Semiconductor FSA880, FSA9480 and compatibles
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  The FSA880 and FSA9480 are USB port accessory detectors and switches.
+  The switch is fully controlled using I2C and enables USB data, stereo
+  and mono audio, video, microphone, and UART data to use a common
+  connector port. Compatible switches exist from other manufacturers.
+
+properties:
+  compatible:
+    enum:
+      - fcs,fsa880
+      - fcs,fsa9480
+      - ti,tsu6111
+
+  reg:
+    maxItems: 1
+    description: The I2C address for an FSA880 compatible device is
+      usually 0x25.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        usb-switch@25 {
+            compatible = "fcs,fsa880";
+            reg = <0x25>;
+            interrupt-parent = <&gpio>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
new file mode 100644
index 000000000000..128960545640
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC Extcon
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77843 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77843-muic
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Any connector to the data bus of this controller should be modelled using
+      the OF graph bindings specified
+    properties:
+      port:
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - connector
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
deleted file mode 100644
index 35383adb10f1..000000000000
--- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Qualcomm's PM8941 USB ID Extcon device
-
-Some Qualcomm PMICs have a "misc" module that can be used to detect when
-the USB ID pin has been pulled low or high.
-
-PROPERTIES
-
-- compatible:
-    Usage: required
-    Value type: <string>
-    Definition: Should contain "qcom,pm8941-misc";
-
-- reg:
-    Usage: required
-    Value type: <u32>
-    Definition: Should contain the offset to the misc address space
-
-- interrupts:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: Should contain the usb id interrupt
-
-- interrupt-names:
-    Usage: required
-    Value type: <stringlist>
-    Definition: Should contain the string "usb_id" for the usb id interrupt
-
-Example:
-
-	pmic {
-		usb_id: misc@900 {
-			compatible = "qcom,pm8941-misc";
-			reg = <0x900>;
-			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "usb_id";
-		};
-	}
-
-	usb-controller {
-		extcon = <&usb_id>;
-	};
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
new file mode 100644
index 000000000000..6a9c96f0352a
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device
+
+maintainers:
+  - Guru Das Srinagesh <gurus@codeaurora.org>
+
+description: |
+  Some Qualcomm PMICs have a "misc" module that can be used to detect when
+  the USB ID pin has been pulled low or high.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,pm8941-misc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: usb_id
+      - const: usb_vbus
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmic {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            interrupt-controller;
+            #interrupt-cells = <4>;
+
+            usb_id: misc@900 {
+                    compatible = "qcom,pm8941-misc";
+                    reg = <0x900>;
+                    interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
+                    interrupt-names = "usb_id";
+            };
+    };
+
+    usb-controller {
+           extcon = <&usb_id>;
+    };
diff --git a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
new file mode 100644
index 000000000000..7a224b2f0977
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/siliconmitus,sm5502-muic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SM5502/SM5504 MUIC (Micro-USB Interface Controller) device
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+
+description:
+  The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device
+  which can detect the state of external accessory when external accessory is
+  attached or detached and button is pressed or released. It is interfaced to
+  the host controller using an I2C interface.
+
+properties:
+  compatible:
+    enum:
+      - siliconmitus,sm5502-muic
+      - siliconmitus,sm5504-muic
+      - siliconmitus,sm5703-muic
+
+  reg:
+    maxItems: 1
+    description: I2C slave address of the device. Usually 0x25 for SM5502
+      and SM5703, 0x14 for SM5504.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        extcon@25 {
+                compatible = "siliconmitus,sm5502-muic";
+                reg = <0x25>;
+                interrupt-parent = <&msmgpio>;
+                interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
new file mode 100644
index 000000000000..efdf59abb2e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  These devices are audio SoCs with extensive digital capabilities and a
+  range of analogue I/O.
+
+  This document lists Extcon specific bindings, see the primary binding
+  document ../mfd/arizona.yaml
+
+properties:
+  wlf,hpdet-channel:
+    description:
+      Headphone detection channel.  ARIZONA_ACCDET_MODE_HPL/1 sets the
+      headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it
+      to HPDETR.  If this node is not included or if the value is unknown,
+      then headphone detection mode is set to HPDETL.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 1
+    maximum: 2
+
+  wlf,use-jd2:
+    description:
+      Use the additional JD input along with JD1 for dual pin jack detection.
+    type: boolean
+
+  wlf,use-jd2-nopull:
+    description:
+      Internal pull on JD2 is disabled when used for jack detection.
+    type: boolean
+
+  wlf,jd-invert:
+    description:
+      Invert the polarity of the jack detection switch.
+    type: boolean
+
+  wlf,micd-software-compare:
+    description:
+      Use a software comparison to determine mic presence.
+    type: boolean
+
+  wlf,micd-detect-debounce:
+    description:
+      Additional software microphone detection debounce specified in
+      milliseconds.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  wlf,micd-pol-gpio:
+    description:
+      GPIO specifier for the GPIO controlling the headset polarity if one
+      exists.
+    maxItems: 1
+
+  wlf,micd-bias-start-time:
+    description:
+      Time allowed for MICBIAS to startup prior to performing microphone
+      detection, specified as per the ARIZONA_MICD_TIME_XXX defines.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 12
+
+  wlf,micd-rate:
+    description:
+      Delay between successive microphone detection measurements, specified
+      as per the ARIZONA_MICD_TIME_XXX defines.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 12
+
+  wlf,micd-dbtime:
+    description:
+      Microphone detection hardware debounces specified as the number of
+      measurements to take.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum: [2, 4]
+
+  wlf,micd-timeout-ms:
+    description:
+      Timeout for microphone detection, specified in milliseconds.
+
+  wlf,micd-force-micbias:
+    description:
+      Force MICBIAS continuously on during microphone detection.
+    type: boolean
+
+  wlf,micd-configs:
+    description:
+      Headset polarity configurations (generally used for detection of
+      CTIA / OMTP headsets), the field can be of variable length but
+      should always be a multiple of 3 cells long, each three cell group
+      represents one polarity configuration.
+    $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
+    items:
+      items:
+        - description:
+            The first cell defines the accessory detection pin, zero
+            will use MICDET1 and 0x2000 will use MICDET2.
+          enum: [ 0, 0x2000 ]
+        - description:
+            The second cell represents the MICBIAS to be used. Zero
+            will use MICVDD, 1-3 will use MICBIASx.
+          minimum: 0
+          maximum: 3
+        - description:
+            The third cell represents the value of the micd-pol-gpio
+            pin.
+          minimum: 0
+          maximum: 1
+
+  wlf,gpsw:
+    description:
+      Settings for the general purpose switch, set as one of the
+      ARIZONA_GPSW_XXX defines.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 3
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
new file mode 100644
index 000000000000..1c0388da6721
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -0,0 +1,432 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2021 ARM Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/arm,scmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Control and Management Interface (SCMI) Message Protocol bindings
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+
+description: |
+  The SCMI is intended to allow agents such as OSPM to manage various functions
+  that are provided by the hardware platform it is running on, including power
+  and performance functions.
+
+  This binding is intended to define the interface the firmware implementing
+  the SCMI as described in ARM document number ARM DEN 0056 ("ARM System Control
+  and Management Interface Platform Design Document")[0] provide for OSPM in
+  the device tree.
+
+  [0] https://developer.arm.com/documentation/den0056/latest
+
+properties:
+  $nodename:
+    const: scmi
+
+  compatible:
+    oneOf:
+      - description: SCMI compliant firmware with mailbox transport
+        items:
+          - const: arm,scmi
+      - description: SCMI compliant firmware with ARM SMC/HVC transport
+        items:
+          - const: arm,scmi-smc
+      - description: SCMI compliant firmware with SCMI Virtio transport.
+                     The virtio transport only supports a single device.
+        items:
+          - const: arm,scmi-virtio
+      - description: SCMI compliant firmware with OP-TEE transport
+        items:
+          - const: linaro,scmi-optee
+
+  interrupts:
+    description:
+      The interrupt that indicates message completion by the platform
+      rather than by the return of the smc call. This should not be used
+      except when the platform requires such behavior.
+    maxItems: 1
+
+  interrupt-names:
+    const: a2p
+
+  mbox-names:
+    description:
+      Specifies the mailboxes used to communicate with SCMI compliant
+      firmware.
+    items:
+      - const: tx
+      - const: rx
+
+  mboxes:
+    description:
+      List of phandle and mailbox channel specifiers. It should contain
+      exactly one or two mailboxes, one for transmitting messages("tx")
+      and another optional for receiving the notifications("rx") if supported.
+    minItems: 1
+    maxItems: 2
+
+  shmem:
+    description:
+      List of phandle pointing to the shared memory(SHM) area, for each
+      transport channel specified.
+    minItems: 1
+    maxItems: 2
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  atomic-threshold-us:
+    description:
+      An optional time value, expressed in microseconds, representing, on this
+      platform, the threshold above which any SCMI command, advertised to have
+      an higher-than-threshold execution latency, should not be considered for
+      atomic mode of operation, even if requested.
+    default: 0
+
+  arm,smc-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      SMC id required when using smc or hvc transports
+
+  linaro,optee-channel-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Channel specifier required when using OP-TEE transport.
+
+  protocol@11:
+    type: object
+    properties:
+      reg:
+        const: 0x11
+
+      '#power-domain-cells':
+        const: 1
+
+    required:
+      - '#power-domain-cells'
+
+  protocol@13:
+    type: object
+    properties:
+      reg:
+        const: 0x13
+
+      '#clock-cells':
+        const: 1
+
+    required:
+      - '#clock-cells'
+
+  protocol@14:
+    type: object
+    properties:
+      reg:
+        const: 0x14
+
+      '#clock-cells':
+        const: 1
+
+    required:
+      - '#clock-cells'
+
+  protocol@15:
+    type: object
+    properties:
+      reg:
+        const: 0x15
+
+      '#thermal-sensor-cells':
+        const: 1
+
+    required:
+      - '#thermal-sensor-cells'
+
+  protocol@16:
+    type: object
+    properties:
+      reg:
+        const: 0x16
+
+      '#reset-cells':
+        const: 1
+
+    required:
+      - '#reset-cells'
+
+  protocol@17:
+    type: object
+    properties:
+      reg:
+        const: 0x17
+
+      regulators:
+        type: object
+        description:
+          The list of all regulators provided by this SCMI controller.
+
+        patternProperties:
+          '^regulators@[0-9a-f]+$':
+            type: object
+            $ref: "../regulator/regulator.yaml#"
+
+            properties:
+              reg:
+                maxItems: 1
+                description: Identifier for the voltage regulator.
+
+            required:
+              - reg
+
+  protocol@18:
+    type: object
+    properties:
+      reg:
+        const: 0x18
+
+additionalProperties: false
+
+patternProperties:
+  '^protocol@[0-9a-f]+$':
+    type: object
+    description:
+      Each sub-node represents a protocol supported. If the platform
+      supports a dedicated communication channel for a particular protocol,
+      then the corresponding transport properties must be present.
+      The virtio transport does not support a dedicated communication channel.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      mbox-names:
+        items:
+          - const: tx
+          - const: rx
+
+      mboxes:
+        minItems: 1
+        maxItems: 2
+
+      shmem:
+        minItems: 1
+        maxItems: 2
+
+      linaro,optee-channel-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Channel specifier required when using OP-TEE transport and
+          protocol has a dedicated communication channel.
+
+    required:
+      - reg
+
+required:
+  - compatible
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: arm,scmi
+then:
+  properties:
+    interrupts: false
+    interrupt-names: false
+
+  required:
+    - mboxes
+    - shmem
+
+else:
+  if:
+    properties:
+      compatible:
+        contains:
+          const: arm,scmi-smc
+  then:
+    required:
+      - arm,smc-id
+      - shmem
+
+  else:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: linaro,scmi-optee
+    then:
+      required:
+        - linaro,optee-channel-id
+
+examples:
+  - |
+    firmware {
+        scmi {
+            compatible = "arm,scmi";
+            mboxes = <&mhuB 0 0>,
+                     <&mhuB 0 1>;
+            mbox-names = "tx", "rx";
+            shmem = <&cpu_scp_lpri0>,
+                    <&cpu_scp_lpri1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            atomic-threshold-us = <10000>;
+
+            scmi_devpd: protocol@11 {
+                reg = <0x11>;
+                #power-domain-cells = <1>;
+            };
+
+            scmi_dvfs: protocol@13 {
+                reg = <0x13>;
+                #clock-cells = <1>;
+
+                mboxes = <&mhuB 1 0>,
+                         <&mhuB 1 1>;
+                mbox-names = "tx", "rx";
+                shmem = <&cpu_scp_hpri0>,
+                        <&cpu_scp_hpri1>;
+            };
+
+            scmi_clk: protocol@14 {
+                reg = <0x14>;
+                #clock-cells = <1>;
+            };
+
+            scmi_sensors: protocol@15 {
+                reg = <0x15>;
+                #thermal-sensor-cells = <1>;
+            };
+
+            scmi_reset: protocol@16 {
+                reg = <0x16>;
+                #reset-cells = <1>;
+            };
+
+            scmi_voltage: protocol@17 {
+                reg = <0x17>;
+                regulators {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    regulator_devX: regulator@0 {
+                        reg = <0x0>;
+                        regulator-max-microvolt = <3300000>;
+                    };
+
+                    regulator_devY: regulator@9 {
+                        reg = <0x9>;
+                        regulator-min-microvolt = <500000>;
+                        regulator-max-microvolt = <4200000>;
+                    };
+                };
+            };
+
+            scmi_powercap: protocol@18 {
+                reg = <0x18>;
+            };
+        };
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@50000000 {
+            compatible = "mmio-sram";
+            reg = <0x0 0x50000000 0x0 0x10000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x0 0x50000000 0x10000>;
+
+            cpu_scp_lpri0: scp-sram-section@0 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x0 0x80>;
+            };
+
+            cpu_scp_lpri1: scp-sram-section@80 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x80 0x80>;
+            };
+
+            cpu_scp_hpri0: scp-sram-section@100 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x100 0x80>;
+            };
+
+            cpu_scp_hpri2: scp-sram-section@180 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x180 0x80>;
+            };
+        };
+    };
+
+  - |
+    firmware {
+        scmi {
+            compatible = "arm,scmi-smc";
+            shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>;
+            arm,smc-id = <0xc3000001>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            scmi_devpd1: protocol@11 {
+                reg = <0x11>;
+                #power-domain-cells = <1>;
+            };
+        };
+    };
+
+  - |
+    firmware {
+        scmi {
+            compatible = "linaro,scmi-optee";
+            linaro,optee-channel-id = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            scmi_dvfs1: protocol@13 {
+                reg = <0x13>;
+                linaro,optee-channel-id = <1>;
+                shmem = <&cpu_optee_lpri0>;
+                #clock-cells = <1>;
+            };
+
+            scmi_clk0: protocol@14 {
+                reg = <0x14>;
+                #clock-cells = <1>;
+            };
+        };
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@51000000 {
+            compatible = "mmio-sram";
+            reg = <0x0 0x51000000 0x0 0x10000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x0 0x51000000 0x10000>;
+
+            cpu_optee_lpri0: optee-sram-section@0 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x0 0x80>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml
new file mode 100644
index 000000000000..1f9322925e7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml
@@ -0,0 +1,249 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2021 ARM Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/arm,scpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Control and Power Interface (SCPI) Message Protocol bindings
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+
+description: |
+  Firmware implementing the SCPI described in ARM document number ARM DUI
+  0922B ("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be
+  used by Linux to initiate various system control and power operations.
+
+  This binding is intended to define the interface the firmware implementing
+  the SCPI provide for OSPM in the device tree.
+
+  [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
+
+properties:
+  $nodename:
+    const: scpi
+
+  compatible:
+    description:
+      SCPI compliant firmware complying to SCPI v1.0 and above OR
+      SCPI compliant firmware complying to all unversioned releases
+      prior to SCPI v1.0
+    oneOf:
+      - const: arm,scpi               # SCPI v1.0 and above
+      - const: arm,scpi-pre-1.0       # Unversioned SCPI before v1.0
+      - items:
+          - enum:
+              - amlogic,meson-gxbb-scpi
+          - const: arm,scpi-pre-1.0
+
+  mboxes:
+    description:
+      List of phandle and mailbox channel specifiers. All the channels reserved
+      by remote SCP firmware for use by SCPI message protocol should be
+      specified in any order.
+    minItems: 1
+    maxItems: 4
+
+  shmem:
+    description:
+      List of phandle pointing to the shared memory(SHM) area between the
+      processors using these mailboxes for IPC, one for each mailbox SHM can
+      be any memory reserved for the purpose of this communication between the
+      processors.
+    minItems: 1
+    maxItems: 4
+
+  power-controller:
+    type: object
+    description:
+      This sub-node represents SCPI power domain controller.
+
+    properties:
+      compatible:
+        const: arm,scpi-power-domains
+
+      '#power-domain-cells':
+        const: 1
+
+      num-domains:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Total number of power domains provided by SCPI. This is needed as
+          the SCPI message protocol lacks a mechanism to query this
+          information at runtime.
+
+    required:
+      - compatible
+      - '#power-domain-cells'
+      - num-domains
+
+    additionalProperties: false
+
+  sensors:
+    type: object
+    description: |
+      This sub-node represents SCPI sensors controller.
+
+    properties:
+      compatible:
+        oneOf:
+          - const: arm,scpi-sensors
+          - items:
+              - enum:
+                  - amlogic,meson-gxbb-scpi-sensors
+              - const: arm,scpi-sensors
+
+      '#thermal-sensor-cells':
+        const: 1
+
+    required:
+      - compatible
+      - '#thermal-sensor-cells'
+
+    additionalProperties: false
+
+  clocks:
+    type: object
+    description:
+      This is the container node. Each sub-node represents one of the types
+      of clock controller - indexed or full range.
+
+    properties:
+      compatible:
+        const: arm,scpi-clocks
+
+    patternProperties:
+      "^clocks-[0-9a-f]+$":
+        type: object
+        description: |
+          This sub-node represents one of the types of clock controller
+          - indexed or full range.
+
+          "arm,scpi-dvfs-clocks" - all the clocks that are variable and index
+          based. These clocks don't provide an entire range of values between
+          the limits but only discrete points within the range. The firmware
+          provides the mapping for each such operating frequency and the index
+          associated with it. The firmware also manages the voltage scaling
+          appropriately with the clock scaling.
+
+          "arm,scpi-variable-clocks" - all the clocks that are variable and
+          provide full range within the specified range. The firmware provides
+          the range of values within a specified range.
+
+        properties:
+          compatible:
+            enum:
+              - arm,scpi-dvfs-clocks
+              - arm,scpi-variable-clocks
+
+          '#clock-cells':
+            const: 1
+
+          clock-output-names: true
+
+          clock-indices:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            description:
+              The identifying number for the clocks(i.e.clock_id) in the node.
+              It can be non linear and hence provide the mapping of identifiers
+              into the clock-output-names array.
+
+        required:
+          - compatible
+          - '#clock-cells'
+          - clock-output-names
+          - clock-indices
+
+        additionalProperties: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mboxes
+  - shmem
+
+examples:
+  - |
+    firmware {
+        scpi {
+            compatible = "arm,scpi";
+            mboxes = <&mhuA 1>;
+            shmem = <&cpu_scp_hpri>; /* HP-NonSecure */
+
+            scpi_devpd: power-controller {
+                compatible = "arm,scpi-power-domains";
+                num-domains = <2>;
+                #power-domain-cells = <1>;
+            };
+
+            clocks {
+                compatible = "arm,scpi-clocks";
+
+                scpi_dvfs: clocks-0 {
+                    compatible = "arm,scpi-dvfs-clocks";
+                    #clock-cells = <1>;
+                    clock-indices = <0>, <1>, <2>;
+                    clock-output-names = "atlclk", "aplclk","gpuclk";
+                };
+
+                scpi_clk: clocks-1 {
+                    compatible = "arm,scpi-variable-clocks";
+                    #clock-cells = <1>;
+                    clock-indices = <3>, <4>;
+                    clock-output-names = "pxlclk0", "pxlclk1";
+                };
+            };
+
+            scpi_sensors: sensors {
+                compatible = "arm,scpi-sensors";
+                #thermal-sensor-cells = <1>;
+            };
+
+        };
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@50000000 {
+            compatible = "mmio-sram";
+            reg = <0x0 0x50000000 0x0 0x10000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x0 0x50000000 0x10000>;
+
+            cpu_scp_lpri: scp-sram-section@0 {
+                compatible = "arm,scp-shmem";
+                reg = <0x0 0x200>;
+            };
+
+            cpu_scp_hpri: scp-sram-section@200 {
+                compatible = "arm,scp-shmem";
+                reg = <0x200 0x200>;
+            };
+        };
+    };
+
+  - |
+    firmware {
+        scpi {
+            compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+            mboxes = <&mailbox 1>, <&mailbox 2>;
+            shmem = <&cpu_scp_lpri>, <&cpu_scp_hpri>;
+
+            scpi_sensors1: sensors {
+                compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
+                #thermal-sensor-cells = <1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/firmware/fsl,scu.yaml b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
new file mode 100644
index 000000000000..557e524786c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/fsl,scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX System Controller Firmware (SCFW)
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+  The System Controller Firmware (SCFW) is a low-level system function
+  which runs on a dedicated Cortex-M core to provide power, clock, and
+  resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
+  (QM, QP), and i.MX8QX (QXP, DX).
+  The AP communicates with the SC using a multi-ported MU module found
+  in the LSIO subsystem. The current definition of this MU module provides
+  5 remote AP connections to the SC to support up to 5 execution environments
+  (TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
+  with the LSIO DSC IP bus. The SC firmware will communicate with this MU
+  using the MSI bus.
+
+properties:
+  compatible:
+    const: fsl,imx-scu
+
+  clock-controller:
+    description:
+      Clock controller node that provides the clocks controlled by the SCU
+    $ref: /schemas/clock/fsl,scu-clk.yaml
+
+  gpio:
+    description:
+      Control the GPIO PINs on SCU domain over the firmware APIs
+    $ref: /schemas/gpio/fsl,imx8qxp-sc-gpio.yaml
+
+  ocotp:
+    description:
+      OCOTP controller node provided by the SCU
+    $ref: /schemas/nvmem/fsl,scu-ocotp.yaml
+
+  keys:
+    description:
+      Keys provided by the SCU
+    $ref: /schemas/input/fsl,scu-key.yaml
+
+  mboxes:
+    description:
+      A list of phandles of TX MU channels followed by a list of phandles of
+      RX MU channels. The list may include at the end one more optional MU
+      channel for general interrupt. The number of expected tx and rx
+      channels is 1 TX and 1 RX channels if MU instance is "fsl,imx8-mu-scu"
+      compatible, 4 TX and 4 RX channels otherwise. All MU channels must be
+      within the same MU instance. Cross instances are not allowed. The MU
+      instance can only be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users
+      need to ensure that one is used that does not conflict with other
+      execution environments such as ATF.
+    oneOf:
+      - items:
+          - description: TX0 MU channel
+          - description: RX0 MU channel
+      - items:
+          - description: TX0 MU channel
+          - description: RX0 MU channel
+          - description: optional MU channel for general interrupt
+      - items:
+          - description: TX0 MU channel
+          - description: TX1 MU channel
+          - description: TX2 MU channel
+          - description: TX3 MU channel
+          - description: RX0 MU channel
+          - description: RX1 MU channel
+          - description: RX2 MU channel
+          - description: RX3 MU channel
+      - items:
+          - description: TX0 MU channel
+          - description: TX1 MU channel
+          - description: TX2 MU channel
+          - description: TX3 MU channel
+          - description: RX0 MU channel
+          - description: RX1 MU channel
+          - description: RX2 MU channel
+          - description: RX3 MU channel
+          - description: optional MU channel for general interrupt
+
+  mbox-names:
+    oneOf:
+      - items:
+          - const: tx0
+          - const: rx0
+      - items:
+          - const: tx0
+          - const: rx0
+          - const: gip3
+      - items:
+          - const: tx0
+          - const: tx1
+          - const: tx2
+          - const: tx3
+          - const: rx0
+          - const: rx1
+          - const: rx2
+          - const: rx3
+      - items:
+          - const: tx0
+          - const: tx1
+          - const: tx2
+          - const: tx3
+          - const: rx0
+          - const: rx1
+          - const: rx2
+          - const: rx3
+          - const: gip3
+
+  pinctrl:
+    description:
+      Pin controller provided by the SCU
+    $ref: /schemas/pinctrl/fsl,scu-pinctrl.yaml
+
+  power-controller:
+    description:
+      Power domains controller node that provides the power domains
+      controlled by the SCU
+    $ref: /schemas/power/fsl,scu-pd.yaml
+
+  rtc:
+    description:
+      RTC controller provided by the SCU
+    $ref: /schemas/rtc/fsl,scu-rtc.yaml
+
+  thermal-sensor:
+    description:
+      Thermal sensor provided by the SCU
+    $ref: /schemas/thermal/fsl,scu-thermal.yaml
+
+  watchdog:
+    description:
+      Watchdog controller provided by the SCU
+    $ref: /schemas/watchdog/fsl,scu-wdt.yaml
+
+required:
+  - compatible
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/pinctrl/pads-imx8qxp.h>
+
+    firmware {
+        system-controller {
+            compatible = "fsl,imx-scu";
+            mbox-names = "tx0", "tx1", "tx2", "tx3",
+                         "rx0", "rx1", "rx2", "rx3",
+                         "gip3";
+            mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 &lsio_mu1 0 3
+                      &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 &lsio_mu1 1 3
+                      &lsio_mu1 3 3>;
+
+            clock-controller {
+                compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+                #clock-cells = <2>;
+            };
+
+            pinctrl {
+                compatible = "fsl,imx8qxp-iomuxc";
+
+                pinctrl_lpuart0: lpuart0grp {
+                    fsl,pins = <
+                        IMX8QXP_UART0_RX_ADMA_UART0_RX   0x06000020
+                        IMX8QXP_UART0_TX_ADMA_UART0_TX   0x06000020
+                    >;
+                };
+            };
+
+            ocotp {
+                compatible = "fsl,imx8qxp-scu-ocotp";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                fec_mac0: mac@2c4 {
+                    reg = <0x2c4 6>;
+                };
+            };
+
+            power-controller {
+                compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+                #power-domain-cells = <1>;
+            };
+
+            rtc {
+                compatible = "fsl,imx8qxp-sc-rtc";
+            };
+
+            keys {
+                compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+                linux,keycodes = <KEY_POWER>;
+            };
+
+            watchdog {
+                compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+                timeout-sec = <60>;
+            };
+
+            thermal-sensor {
+                compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+                #thermal-sensor-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
index 878a2079ebb6..9a785bbaafb7 100644
--- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
+++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
@@ -26,17 +26,69 @@ properties:
 
   reg:
     items:
-      - description: NPE0 register range
-      - description: NPE1 register range
-      - description: NPE2 register range
+      - description: NPE0 (NPE-A) register range
+      - description: NPE1 (NPE-B) register range
+      - description: NPE2 (NPE-C) register range
+
+  crypto:
+    $ref: /schemas/crypto/intel,ixp4xx-crypto.yaml#
+    type: object
+    description: Optional node for the embedded crypto engine, the node
+      should be named with the instance number of the NPE engine used for
+      the crypto engine.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  hss@[0-9]+$:
+    $ref: /schemas/net/intel,ixp4xx-hss.yaml#
+    type: object
+    description: Optional node for the High Speed Serial link (HSS), the
+      node should be named with the instance number of the NPE engine
+      used for the HSS.
 
 required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
-    npe@c8006000 {
+    #include <dt-bindings/gpio/gpio.h>
+
+    npe: npe@c8006000 {
          compatible = "intel,ixp4xx-network-processing-engine";
          reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+         #address-cells = <1>;
+         #size-cells = <0>;
+
+         hss@0 {
+             compatible = "intel,ixp4xx-hss";
+             reg = <0>;
+             intel,npe-handle = <&npe 0>;
+             intel,queue-chl-rxtrig = <&qmgr 12>;
+             intel,queue-chl-txready = <&qmgr 34>;
+             intel,queue-pkt-rx = <&qmgr 13>;
+             intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
+             intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
+             intel,queue-pkt-txdone = <&qmgr 22>;
+             cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+             rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+             dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+             dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
+             clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
+         };
+
+         crypto {
+             compatible = "intel,ixp4xx-crypto";
+             intel,npe-handle = <&npe 2>;
+             queue-rx = <&qmgr 30>;
+             queue-txready = <&qmgr 29>;
+         };
     };
+...
diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
index 1fa66065acc6..6eff1afd8daf 100644
--- a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
+++ b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
@@ -23,7 +23,7 @@ Required properties:
 The svc node has the following mandatory properties, must be located under
 the firmware node.
 
-- compatible: "intel,stratix10-svc"
+- compatible: "intel,stratix10-svc" or "intel,agilex-svc"
 - method: smc or hvc
         smc - Secure Monitor Call
         hvc - Hypervisor Call
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
deleted file mode 100644
index e44a13bc06ed..000000000000
--- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-NVIDIA Tegra Boot and Power Management Processor (BPMP)
-
-The BPMP is a specific processor in Tegra chip, which is designed for
-booting process handling and offloading the power management, clock
-management, and reset control tasks from the CPU. The binding document
-defines the resources that would be used by the BPMP firmware driver,
-which can create the interprocessor communication (IPC) between the CPU
-and BPMP.
-
-Required properties:
-- compatible
-    Array of strings
-    One of:
-    - "nvidia,tegra186-bpmp"
-- mboxes : The phandle of mailbox controller and the mailbox specifier.
-- shmem : List of the phandle of the TX and RX shared memory area that
-	  the IPC between CPU and BPMP is based on.
-- #clock-cells : Should be 1.
-- #power-domain-cells : Should be 1.
-- #reset-cells : Should be 1.
-
-This node is a mailbox consumer. See the following files for details of
-the mailbox subsystem, and the specifiers implemented by the relevant
-provider(s):
-
-- .../mailbox/mailbox.txt
-- .../mailbox/nvidia,tegra186-hsp.txt
-
-This node is a clock, power domain, and reset provider. See the following
-files for general documentation of those features, and the specifiers
-implemented by this node:
-
-- .../clock/clock-bindings.txt
-- <dt-bindings/clock/tegra186-clock.h>
-- ../power/power-domain.yaml
-- <dt-bindings/power/tegra186-powergate.h>
-- .../reset/reset.txt
-- <dt-bindings/reset/tegra186-reset.h>
-
-The BPMP implements some services which must be represented by separate nodes.
-For example, it can provide access to certain I2C controllers, and the I2C
-bindings represent each I2C controller as a device tree node. Such nodes should
-be nested directly inside the main BPMP node.
-
-Software can determine whether a child node of the BPMP node represents a device
-by checking for a compatible property. Any node with a compatible property
-represents a device that can be instantiated. Nodes without a compatible
-property may be used to provide configuration information regarding the BPMP
-itself, although no such configuration nodes are currently defined by this
-binding.
-
-The BPMP firmware defines no single global name-/numbering-space for such
-services. Put another way, the numbering scheme for I2C buses is distinct from
-the numbering scheme for any other service the BPMP may provide (e.g. a future
-hypothetical SPI bus service). As such, child device nodes will have no reg
-property, and the BPMP node will have no #address-cells or #size-cells property.
-
-The shared memory bindings for BPMP
------------------------------------
-
-The shared memory area for the IPC TX and RX between CPU and BPMP are
-predefined and work on top of sysram, which is an SRAM inside the chip.
-
-See ".../sram/sram.txt" for the bindings.
-
-Example:
-
-hsp_top0: hsp@3c00000 {
-	...
-	#mbox-cells = <2>;
-};
-
-sysram@30000000 {
-	compatible = "nvidia,tegra186-sysram", "mmio-sram";
-	reg = <0x0 0x30000000 0x0 0x50000>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
-
-	cpu_bpmp_tx: shmem@4e000 {
-		compatible = "nvidia,tegra186-bpmp-shmem";
-		reg = <0x0 0x4e000 0x0 0x1000>;
-		label = "cpu-bpmp-tx";
-		pool;
-	};
-
-	cpu_bpmp_rx: shmem@4f000 {
-		compatible = "nvidia,tegra186-bpmp-shmem";
-		reg = <0x0 0x4f000 0x0 0x1000>;
-		label = "cpu-bpmp-rx";
-		pool;
-	};
-};
-
-bpmp {
-	compatible = "nvidia,tegra186-bpmp";
-	mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>;
-	shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
-	#clock-cells = <1>;
-	#power-domain-cells = <1>;
-	#reset-cells = <1>;
-
-	i2c {
-		compatible = "...";
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
new file mode 100644
index 000000000000..833c07f1685c
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/nvidia,tegra186-bpmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Boot and Power Management Processor (BPMP)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The BPMP is a specific processor in Tegra chip, which is designed for
+  booting process handling and offloading the power management, clock
+  management, and reset control tasks from the CPU. The binding document
+  defines the resources that would be used by the BPMP firmware driver,
+  which can create the interprocessor communication (IPC) between the
+  CPU and BPMP.
+
+  This node is a mailbox consumer. See the following files for details
+  of the mailbox subsystem, and the specifiers implemented by the
+  relevant provider(s):
+
+    - .../mailbox/mailbox.txt
+    - .../mailbox/nvidia,tegra186-hsp.yaml
+
+  This node is a clock, power domain, and reset provider. See the
+  following files for general documentation of those features, and the
+  specifiers implemented by this node:
+
+    - .../clock/clock-bindings.txt
+    - <dt-bindings/clock/tegra186-clock.h>
+    - ../power/power-domain.yaml
+    - <dt-bindings/power/tegra186-powergate.h>
+    - .../reset/reset.txt
+    - <dt-bindings/reset/tegra186-reset.h>
+
+  The BPMP implements some services which must be represented by
+  separate nodes. For example, it can provide access to certain I2C
+  controllers, and the I2C bindings represent each I2C controller as a
+  device tree node. Such nodes should be nested directly inside the main
+  BPMP node.
+
+  Software can determine whether a child node of the BPMP node
+  represents a device by checking for a compatible property. Any node
+  with a compatible property represents a device that can be
+  instantiated. Nodes without a compatible property may be used to
+  provide configuration information regarding the BPMP itself, although
+  no such configuration nodes are currently defined by this binding.
+
+  The BPMP firmware defines no single global name-/numbering-space for
+  such services. Put another way, the numbering scheme for I2C buses is
+  distinct from the numbering scheme for any other service the BPMP may
+  provide (e.g. a future hypothetical SPI bus service). As such, child
+  device nodes will have no reg property, and the BPMP node will have no
+  "#address-cells" or "#size-cells" property.
+
+  The shared memory area for the IPC TX and RX between CPU and BPMP are
+  predefined and work on top of sysram, which is an SRAM inside the
+  chip. See ".../sram/sram.yaml" for the bindings.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra194-bpmp
+              - nvidia,tegra234-bpmp
+          - const: nvidia,tegra186-bpmp
+      - const: nvidia,tegra186-bpmp
+
+  mboxes:
+    description: A phandle and channel specifier for the mailbox used to
+      communicate with the BPMP.
+    maxItems: 1
+
+  shmem:
+    description: List of the phandle to the TX and RX shared memory area
+      that the IPC between CPU and BPMP is based on.
+    minItems: 2
+    maxItems: 2
+
+  "#clock-cells":
+    const: 1
+
+  "#power-domain-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+      - description: DMA read client
+      - description: DMA write client
+
+  interconnect-names:
+    items:
+      - const: read
+      - const: write
+      - const: dma-mem # dma-read
+      - const: dma-write
+
+  iommus:
+    maxItems: 1
+
+  i2c:
+    type: object
+
+  thermal:
+    type: object
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mboxes
+  - shmem
+  - "#clock-cells"
+  - "#power-domain-cells"
+  - "#reset-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+
+    hsp_top0: hsp@3c00000 {
+        compatible = "nvidia,tegra186-hsp";
+        reg = <0x03c00000 0xa0000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "doorbell";
+        #mbox-cells = <2>;
+    };
+
+    sram@30000000 {
+        compatible = "nvidia,tegra186-sysram", "mmio-sram";
+        reg = <0x30000000 0x50000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x30000000 0x50000>;
+
+        cpu_bpmp_tx: sram@4e000 {
+            reg = <0x4e000 0x1000>;
+            label = "cpu-bpmp-tx";
+            pool;
+        };
+
+        cpu_bpmp_rx: sram@4f000 {
+            reg = <0x4f000 0x1000>;
+            label = "cpu-bpmp-rx";
+            pool;
+        };
+    };
+
+    bpmp {
+        compatible = "nvidia,tegra186-bpmp";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+        interconnect-names = "read", "write", "dma-mem", "dma-write";
+        iommus = <&smmu TEGRA186_SID_BPMP>;
+        mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
+                            TEGRA_HSP_DB_MASTER_BPMP>;
+        shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
+        #clock-cells = <1>;
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+
+        i2c {
+            compatible = "nvidia,tegra186-bpmp-i2c";
+            nvidia,bpmp-bus-id = <5>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        thermal {
+            compatible = "nvidia,tegra186-bpmp-thermal";
+            #thermal-sensor-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
deleted file mode 100644
index 3f29ea04b5fe..000000000000
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-QCOM Secure Channel Manager (SCM)
-
-Qualcomm processors include an interface to communicate to the secure firmware.
-This interface allows for clients to request different types of actions.  These
-can include CPU power up/down, HDCP requests, loading of firmware, and other
-assorted actions.
-
-Required properties:
-- compatible: must contain one of the following:
- * "qcom,scm-apq8064"
- * "qcom,scm-apq8084"
- * "qcom,scm-ipq4019"
- * "qcom,scm-msm8660"
- * "qcom,scm-msm8916"
- * "qcom,scm-msm8960"
- * "qcom,scm-msm8974"
- * "qcom,scm-msm8996"
- * "qcom,scm-msm8998"
- * "qcom,scm-sc7180"
- * "qcom,scm-sdm845"
- * "qcom,scm-sm8150"
- and:
- * "qcom,scm"
-- clocks: Specifies clocks needed by the SCM interface, if any:
- * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
-   "qcom,scm-msm8960"
- * core, iface and bus clocks required for "qcom,scm-apq8084",
-   "qcom,scm-msm8916" and "qcom,scm-msm8974"
-- clock-names: Must contain "core" for the core clock, "iface" for the interface
-  clock and "bus" for the bus clock per the requirements of the compatible.
-- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
-		   download mode control register (optional)
-
-Example for MSM8916:
-
-	firmware {
-		scm {
-			compatible = "qcom,msm8916", "qcom,scm";
-			clocks = <&gcc GCC_CRYPTO_CLK> ,
-				 <&gcc GCC_CRYPTO_AXI_CLK>,
-				 <&gcc GCC_CRYPTO_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
new file mode 100644
index 000000000000..c5b76c9f7ad0
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/qcom,scm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM Secure Channel Manager (SCM)
+
+description: |
+  Qualcomm processors include an interface to communicate to the secure firmware.
+  This interface allows for clients to request different types of actions.
+  These can include CPU power up/down, HDCP requests, loading of firmware,
+  and other assorted actions.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Robert Marko <robimarko@gmail.com>
+  - Guru Das Srinagesh <quic_gurus@quicinc.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,scm-apq8064
+          - qcom,scm-apq8084
+          - qcom,scm-ipq4019
+          - qcom,scm-ipq6018
+          - qcom,scm-ipq806x
+          - qcom,scm-ipq8074
+          - qcom,scm-mdm9607
+          - qcom,scm-msm8226
+          - qcom,scm-msm8660
+          - qcom,scm-msm8916
+          - qcom,scm-msm8953
+          - qcom,scm-msm8960
+          - qcom,scm-msm8974
+          - qcom,scm-msm8976
+          - qcom,scm-msm8994
+          - qcom,scm-msm8996
+          - qcom,scm-msm8998
+          - qcom,scm-sc7180
+          - qcom,scm-sc7280
+          - qcom,scm-sc8280xp
+          - qcom,scm-sdm845
+          - qcom,scm-sdx55
+          - qcom,scm-sdx65
+          - qcom,scm-sm6115
+          - qcom,scm-sm6125
+          - qcom,scm-sm6350
+          - qcom,scm-sm8150
+          - qcom,scm-sm8250
+          - qcom,scm-sm8350
+          - qcom,scm-sm8450
+          - qcom,scm-qcs404
+      - const: qcom,scm
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+  qcom,dload-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the download mode control register
+    description: TCSR hardware block
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8064
+              - qcom,scm-msm8660
+              - qcom,scm-msm8960
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+
+        clocks:
+          maxItems: 1
+
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8084
+              - qcom,scm-mdm9607
+              - qcom,scm-msm8916
+              - qcom,scm-msm8953
+              - qcom,scm-msm8974
+              - qcom,scm-msm8976
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+            - const: bus
+            - const: iface
+
+        clocks:
+          minItems: 3
+          maxItems: 3
+
+      required:
+        - clocks
+        - clock-names
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+    firmware {
+        scm {
+            compatible = "qcom,scm-msm8916", "qcom,scm";
+            clocks = <&gcc GCC_CRYPTO_CLK>,
+                     <&gcc GCC_CRYPTO_AXI_CLK>,
+                     <&gcc GCC_CRYPTO_AHB_CLK>;
+            clock-names = "core", "bus", "iface";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
new file mode 100644
index 000000000000..fcf0011b8e6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/qemu,fw-cfg-mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QEMU Firmware Configuration bindings
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |
+  Various QEMU emulation / virtualization targets provide the following
+  Firmware Configuration interface on the "virt" machine type:
+
+  - A write-only, 16-bit wide selector (or control) register,
+  - a read-write, 64-bit wide data register.
+
+  QEMU exposes the control and data register to guests as memory mapped
+  registers; their location is communicated to the guest's UEFI firmware in the
+  DTB that QEMU places at the bottom of the guest's DRAM.
+
+  The authoritative guest-side hardware interface documentation to the fw_cfg
+  device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree.
+
+
+properties:
+  compatible:
+    const: qemu,fw-cfg-mmio
+
+  reg:
+    maxItems: 1
+    description: |
+      * Bytes 0x0 to 0x7 cover the data register.
+      * Bytes 0x8 to 0x9 cover the selector register.
+      * Further registers may be appended to the region in case of future interface
+        revisions / feature bits.
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    fw-cfg@9020000 {
+        compatible = "qemu,fw-cfg-mmio";
+        reg = <0x9020000 0xa>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
deleted file mode 100644
index 18c3aea90df2..000000000000
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
+++ /dev/null
@@ -1,44 +0,0 @@
------------------------------------------------------------------
-Device Tree Bindings for the Xilinx Zynq MPSoC Firmware Interface
------------------------------------------------------------------
-
-The zynqmp-firmware node describes the interface to platform firmware.
-ZynqMP has an interface to communicate with secure firmware. Firmware
-driver provides an interface to firmware APIs. Interface APIs can be
-used by any driver to communicate to PMUFW(Platform Management Unit).
-These requests include clock management, pin control, device control,
-power management service, FPGA service and other platform management
-services.
-
-Required properties:
- - compatible:	Must contain any of below:
-		"xlnx,zynqmp-firmware" for Zynq Ultrascale+ MPSoC
-		"xlnx,versal-firmware" for Versal
- - method:	The method of calling the PM-API firmware layer.
-		Permitted values are:
-		  - "smc" : SMC #0, following the SMCCC
-		  - "hvc" : HVC #0, following the SMCCC
-
--------
-Example
--------
-
-Zynq Ultrascale+ MPSoC
-----------------------
-firmware {
-	zynqmp_firmware: zynqmp-firmware {
-		compatible = "xlnx,zynqmp-firmware";
-		method = "smc";
-		...
-	};
-};
-
-Versal
-------
-firmware {
-	versal_firmware: versal-firmware {
-		compatible = "xlnx,versal-firmware";
-		method = "smc";
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
new file mode 100644
index 000000000000..f14f7b454f07
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/xilinx/xlnx,zynqmp-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx firmware driver
+
+maintainers:
+  - Nava kishore Manne <nava.manne@xilinx.com>
+
+description: The zynqmp-firmware node describes the interface to platform
+  firmware. ZynqMP has an interface to communicate with secure firmware.
+  Firmware driver provides an interface to firmware APIs. Interface APIs
+  can be used by any driver to communicate to PMUFW(Platform Management Unit).
+  These requests include clock management, pin control, device control,
+  power management service, FPGA service and other platform management
+  services.
+
+properties:
+  compatible:
+    oneOf:
+      - description: For implementations complying for Zynq Ultrascale+ MPSoC.
+        const: xlnx,zynqmp-firmware
+
+      - description: For implementations complying for Versal.
+        const: xlnx,versal-firmware
+
+  method:
+    description: |
+                 The method of calling the PM-API firmware layer.
+                 Permitted values are.
+                 - "smc" : SMC #0, following the SMCCC
+                 - "hvc" : HVC #0, following the SMCCC
+
+    $ref: /schemas/types.yaml#/definitions/string-array
+    enum:
+      - smc
+      - hvc
+
+  versal_fpga:
+    $ref: /schemas/fpga/xlnx,versal-fpga.yaml#
+    description: Compatible of the FPGA device.
+    type: object
+
+  zynqmp-aes:
+    $ref: /schemas/crypto/xlnx,zynqmp-aes.yaml#
+    description: The ZynqMP AES-GCM hardened cryptographic accelerator is
+      used to encrypt or decrypt the data with provided key and initialization
+      vector.
+    type: object
+
+  clock-controller:
+    $ref: /schemas/clock/xlnx,versal-clk.yaml#
+    description: The clock controller is a hardware block of Xilinx versal
+      clock tree. It reads required input clock frequencies from the devicetree
+      and acts as clock provider for all clock consumers of PS clocks.list of
+      clock specifiers which are external input clocks to the given clock
+      controller.
+    type: object
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    versal-firmware {
+      compatible = "xlnx,versal-firmware";
+      method = "smc";
+
+      versal_fpga: versal_fpga {
+        compatible = "xlnx,versal-fpga";
+      };
+
+      xlnx_aes: zynqmp-aes {
+        compatible = "xlnx,zynqmp-aes";
+      };
+
+      versal_clk: clock-controller {
+        #clock-cells = <1>;
+        compatible = "xlnx,versal-clk";
+        clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
+        clock-names = "ref", "alt_ref", "pl_alt_ref";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
index 90c44694a30b..6694ef29a267 100644
--- a/Documentation/devicetree/bindings/fpga/fpga-region.txt
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt
@@ -38,7 +38,7 @@ Partial Reconfiguration (PR)
 
 Partial Reconfiguration Region (PRR)
  * Also called a "reconfigurable partition"
- * A PRR is a specific section of a FPGA reserved for reconfiguration.
+ * A PRR is a specific section of an FPGA reserved for reconfiguration.
  * A base (or static) FPGA image may create a set of PRR's that later may
    be independently reprogrammed many times.
  * The size and specific location of each PRR is fixed.
@@ -105,7 +105,7 @@ reprogrammed independently while the rest of the system continues to function.
 Sequence
 ========
 
-When a DT overlay that targets a FPGA Region is applied, the FPGA Region will
+When a DT overlay that targets an FPGA Region is applied, the FPGA Region will
 do the following:
 
  1. Disable appropriate FPGA bridges.
@@ -134,8 +134,8 @@ The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
 FPGA while an operating system is running.
 
 An FPGA Region that exists in the live Device Tree reflects the current state.
-If the live tree shows a "firmware-name" property or child nodes under a FPGA
-Region, the FPGA already has been programmed.  A DTO that targets a FPGA Region
+If the live tree shows a "firmware-name" property or child nodes under an FPGA
+Region, the FPGA already has been programmed.  A DTO that targets an FPGA Region
 and adds the "firmware-name" property is taken as a request to reprogram the
 FPGA.  After reprogramming is successful, the overlay is accepted into the live
 tree.
@@ -152,9 +152,9 @@ These FPGA regions are children of FPGA bridges which are then children of the
 base FPGA region.  The "Full Reconfiguration to add PRR's" example below shows
 this.
 
-If an FPGA Region does not specify a FPGA Manager, it will inherit the FPGA
+If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA
 Manager specified by its ancestor FPGA Region.  This supports both the case
-where the same FPGA Manager is used for all of a FPGA as well the case where
+where the same FPGA Manager is used for all of an FPGA as well the case where
 a different FPGA Manager is used for each region.
 
 FPGA Regions do not inherit their ancestor FPGA regions' bridges.  This prevents
@@ -166,7 +166,7 @@ within the static image of the FPGA.
 Required properties:
 - compatible : should contain "fpga-region"
 - fpga-mgr : should contain a phandle to an FPGA Manager.  Child FPGA Regions
-	inherit this property from their ancestor regions.  A fpga-mgr property
+	inherit this property from their ancestor regions.  An fpga-mgr property
 	in a region will override any inherited FPGA manager.
 - #address-cells, #size-cells, ranges : must be present to handle address space
 	mapping for child nodes.
@@ -175,12 +175,12 @@ Optional properties:
 - firmware-name : should contain the name of an FPGA image file located on the
 	firmware search path.  If this property shows up in a live device tree
 	it indicates that the FPGA has already been programmed with this image.
-	If this property is in an overlay targeting a FPGA region, it is a
+	If this property is in an overlay targeting an FPGA region, it is a
 	request to program the FPGA with that image.
 - fpga-bridges : should contain a list of phandles to FPGA Bridges that must be
 	controlled during FPGA programming along with the parent FPGA bridge.
 	This property is optional if the FPGA Manager handles the bridges.
-        If the fpga-region is  the child of a fpga-bridge, the list should not
+        If the fpga-region is  the child of an fpga-bridge, the list should not
         contain the parent bridge.
 - partial-fpga-config : boolean, set if partial reconfiguration is to be done,
 	otherwise full reconfiguration is done.
@@ -245,36 +245,31 @@ Base tree contains:
 
 Overlay contains:
 
-/dts-v1/ /plugin/;
-/ {
-	fragment@0 {
-		target = <&fpga_region0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			firmware-name = "soc_system.rbf";
-			fpga-bridges = <&fpga_bridge1>;
-			ranges = <0x20000 0xff200000 0x100000>,
-				 <0x0 0xc0000000 0x20000000>;
-
-			gpio@10040 {
-				compatible = "altr,pio-1.0";
-				reg = <0x10040 0x20>;
-				altr,gpio-bank-width = <4>;
-				#gpio-cells = <2>;
-				clocks = <2>;
-				gpio-controller;
-			};
-
-			onchip-memory {
-				device_type = "memory";
-				compatible = "altr,onchipmem-15.1";
-				reg = <0x0 0x10000>;
-			};
-		};
+/dts-v1/;
+/plugin/;
+
+&fpga_region0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	firmware-name = "soc_system.rbf";
+	fpga-bridges = <&fpga_bridge1>;
+	ranges = <0x20000 0xff200000 0x100000>,
+		 <0x0 0xc0000000 0x20000000>;
+
+	gpio@10040 {
+		compatible = "altr,pio-1.0";
+		reg = <0x10040 0x20>;
+		altr,ngpio = <4>;
+		#gpio-cells = <2>;
+		clocks = <2>;
+		gpio-controller;
+	};
+
+	onchip-memory {
+		device_type = "memory";
+		compatible = "altr,onchipmem-15.1";
+		reg = <0x0 0x10000>;
 	};
 };
 
@@ -284,7 +279,7 @@ Supported Use Models
 
 In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and
 a FPGA Region.  The target of the Device Tree Overlay is the FPGA Region.  Some
-uses are specific to a FPGA device.
+uses are specific to an FPGA device.
 
  * No FPGA Bridges
    In this case, the FPGA Manager which programs the FPGA also handles the
@@ -305,7 +300,7 @@ uses are specific to a FPGA device.
    bridges need to exist in the FPGA that can gate the buses going to each FPGA
    region while the buses are enabled for other sections.  Before any partial
    reconfiguration can be done, a base FPGA image must be loaded which includes
-   PRR's with FPGA bridges.  The device tree should have a FPGA region for each
+   PRR's with FPGA bridges.  The device tree should have an FPGA region for each
    PRR.
 
 Device Tree Examples
@@ -335,7 +330,7 @@ succeeded.
 
 The Device Tree Overlay will contain:
  * "target-path" or "target"
-   The insertion point where the the contents of the overlay will go into the
+   The insertion point where the contents of the overlay will go into the
    live tree.  target-path is a full path, while target is a phandle.
  * "ranges"
     The address space mapping from processor to FPGA bus(ses).
@@ -371,25 +366,22 @@ Live Device Tree contains:
 	};
 
 DT Overlay contains:
-/dts-v1/ /plugin/;
-/ {
-fragment@0 {
-	target = <&fpga_region0>;
+
+/dts-v1/;
+/plugin/;
+
+&fpga_region0 {
 	#address-cells = <1>;
 	#size-cells = <1>;
-	__overlay__ {
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		firmware-name = "zynq-gpio.bin";
+	firmware-name = "zynq-gpio.bin";
 
-		gpio1: gpio@40000000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			reg = <0x40000000 0x10000>;
-			gpio-controller;
-			#gpio-cells = <0x2>;
-			xlnx,gpio-width= <0x6>;
-		};
+	gpio1: gpio@40000000 {
+		compatible = "xlnx,xps-gpio-1.00.a";
+		reg = <0x40000000 0x10000>;
+		gpio-controller;
+		#gpio-cells = <0x2>;
+		xlnx,gpio-width= <0x6>;
 	};
 };
 
@@ -402,41 +394,37 @@ This example programs the FPGA to have two regions that can later be partially
 configured.  Each region has its own bridge in the FPGA fabric.
 
 DT Overlay contains:
-/dts-v1/ /plugin/;
-/ {
-	fragment@0 {
-		target = <&fpga_region0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			firmware-name = "base.rbf";
-
-			fpga-bridge@4400 {
-				compatible = "altr,freeze-bridge-controller";
-				reg = <0x4400 0x10>;
-
-				fpga_region1: fpga-region1 {
-					compatible = "fpga-region";
-					#address-cells = <0x1>;
-					#size-cells = <0x1>;
-					ranges;
-				};
-			};
-
-			fpga-bridge@4420 {
-				compatible = "altr,freeze-bridge-controller";
-				reg = <0x4420 0x10>;
-
-				fpga_region2: fpga-region2 {
-					compatible = "fpga-region";
-					#address-cells = <0x1>;
-					#size-cells = <0x1>;
-					ranges;
-				};
-			};
+
+/dts-v1/;
+/plugin/;
+
+&fpga_region0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	firmware-name = "base.rbf";
+
+	fpga-bridge@4400 {
+		compatible = "altr,freeze-bridge-controller";
+		reg = <0x4400 0x10>;
+
+		fpga_region1: fpga-region1 {
+			compatible = "fpga-region";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			ranges;
+		};
+	};
+
+	fpga-bridge@4420 {
+		compatible = "altr,freeze-bridge-controller";
+		reg = <0x4420 0x10>;
+
+		fpga_region2: fpga-region2 {
+			compatible = "fpga-region";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			ranges;
 		};
 	};
 };
@@ -451,29 +439,23 @@ differences are that the FPGA is partially reconfigured due to the
 "partial-fpga-config" boolean and the only bridge that is controlled during
 programming is the FPGA based bridge of fpga_region1.
 
-/dts-v1/ /plugin/;
-/ {
-	fragment@0 {
-		target = <&fpga_region1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			firmware-name = "soc_image2.rbf";
-			partial-fpga-config;
-
-			gpio@10040 {
-				compatible = "altr,pio-1.0";
-				reg = <0x10040 0x20>;
-				clocks = <0x2>;
-				altr,gpio-bank-width = <0x4>;
-				resetvalue = <0x0>;
-				#gpio-cells = <0x2>;
-				gpio-controller;
-			};
-		};
+/dts-v1/;
+/plugin/;
+
+&fpga_region1 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	firmware-name = "soc_image2.rbf";
+	partial-fpga-config;
+
+	gpio@10040 {
+		compatible = "altr,pio-1.0";
+		reg = <0x10040 0x20>;
+		clocks = <0x2>;
+		altr,ngpio = <0x4>;
+		#gpio-cells = <0x2>;
+		gpio-controller;
 	};
 };
 
@@ -494,4 +476,4 @@ FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
 --
 [1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf
 [2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
-[3] http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
+[3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
diff --git a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
index 6e03f79287fb..0f874137ca46 100644
--- a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
+++ b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
@@ -4,7 +4,8 @@ Required properties:
 The fpga_mgr node has the following mandatory property, must be located under
 firmware/svc node.
 
-- compatible : should contain "intel,stratix10-soc-fpga-mgr"
+- compatible : should contain "intel,stratix10-soc-fpga-mgr" or
+	       "intel,agilex-soc-fpga-mgr"
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
new file mode 100644
index 000000000000..527532f039ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/microchip,mpf-spi-fpga-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Polarfire FPGA manager.
+
+maintainers:
+  - Ivan Bornyakov <i.bornyakov@metrotek.ru>
+
+description:
+  Device Tree Bindings for Microchip Polarfire FPGA Manager using slave SPI to
+  load the bitstream in .dat format.
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpf-spi-fpga-mgr
+
+  reg:
+    description: SPI chip select
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            fpga_mgr@0 {
+                    compatible = "microchip,mpf-spi-fpga-mgr";
+                    spi-max-frequency = <20000000>;
+                    reg = <0>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
index 4284d293fa61..0acdfa6d62a4 100644
--- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
+++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
@@ -7,13 +7,24 @@ changes from passing through the bridge.  The controller can also
 couple / enable the bridges which allows traffic to pass through the
 bridge normally.
 
+Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager
+Softcore is compatible with the Xilinx LogiCORE pr-decoupler.
+
+The Dynamic Function eXchange AXI shutdown manager prevents AXI traffic
+from passing through the bridge. The controller safely handles AXI4MM
+and AXI4-Lite interfaces on a Reconfigurable Partition when it is
+undergoing dynamic reconfiguration, preventing the system deadlock
+that can occur if AXI transactions are interrupted by DFX
+
 The Driver supports only MMIO handling. A PR region can have multiple
 PR Decouplers which can be handled independently or chained via decouple/
 decouple_status signals.
 
 Required properties:
 - compatible		: Should contain "xlnx,pr-decoupler-1.00" followed by
-                          "xlnx,pr-decoupler"
+                          "xlnx,pr-decoupler" or
+                          "xlnx,dfx-axi-shutdown-manager-1.00" followed by
+                          "xlnx,dfx-axi-shutdown-manager"
 - regs			: base address and size for decoupler module
 - clocks		: input clock to IP
 - clock-names		: should contain "aclk"
@@ -22,6 +33,7 @@ See Documentation/devicetree/bindings/fpga/fpga-region.txt and
 Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
 
 Example:
+Partial Reconfig Decoupler:
 	fpga-bridge@100000450 {
 		compatible = "xlnx,pr-decoupler-1.00",
 			     "xlnx-pr-decoupler";
@@ -30,3 +42,13 @@ Example:
 		clock-names = "aclk";
 		bridge-enable = <0>;
 	};
+
+Dynamic Function eXchange AXI shutdown manager:
+	fpga-bridge@100000450 {
+		compatible = "xlnx,dfx-axi-shutdown-manager-1.00",
+			     "xlnx,dfx-axi-shutdown-manager";
+		regs = <0x10000045 0x10>;
+		clocks = <&clkc 15>;
+		clock-names = "aclk";
+		bridge-enable = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
index cfa4ed42b62f..5ef659c1394d 100644
--- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
+++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
@@ -1,11 +1,14 @@
 Xilinx Slave Serial SPI FPGA Manager
 
-Xilinx Spartan-6 FPGAs support a method of loading the bitstream over
-what is referred to as "slave serial" interface.
+Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the
+bitstream over what is referred to as "slave serial" interface.
 The slave serial link is not technically SPI, and might require extra
 circuits in order to play nicely with other SPI slaves on the same bus.
 
-See https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
+See:
+- https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
+- https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
+- https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
 
 Required properties:
 - compatible: should contain "xlnx,fpga-slave-serial"
@@ -13,6 +16,10 @@ Required properties:
 - prog_b-gpios: config pin (referred to as PROGRAM_B in the manual)
 - done-gpios: config status pin (referred to as DONE in the manual)
 
+Optional properties:
+- init-b-gpios: initialization status and configuration error pin
+                (referred to as INIT_B in the manual)
+
 Example for full FPGA configuration:
 
 	fpga-region0 {
@@ -37,7 +44,8 @@ Example for full FPGA configuration:
 			spi-max-frequency = <60000000>;
 			spi-cpha;
 			reg = <0>;
-			done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 			prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+			init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+			done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt
deleted file mode 100644
index 7018aa896835..000000000000
--- a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Xilinx Zynq FPGA Manager
-
-Required properties:
-- compatible:		should contain "xlnx,zynq-devcfg-1.0"
-- reg:			base address and size for memory mapped io
-- interrupts:		interrupt for the FPGA manager device
-- clocks:		phandle for clocks required operation
-- clock-names:		name for the clock, should be "ref_clk"
-- syscon:		phandle for access to SLCR registers
-
-Example:
-	devcfg: devcfg@f8007000 {
-		compatible = "xlnx,zynq-devcfg-1.0";
-		reg = <0xf8007000 0x100>;
-		interrupts = <0 8 4>;
-		clocks = <&clkc 12>;
-		clock-names = "ref_clk";
-		syscon = <&slcr>;
-	};
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
new file mode 100644
index 000000000000..f47b6140a742
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xilinx-zynq-fpga-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq FPGA Manager
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+properties:
+  compatible:
+    const: xlnx,zynq-devcfg-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref_clk
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to syscon block which provide access to SLCR registers
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    devcfg: devcfg@f8007000 {
+      compatible = "xlnx,zynq-devcfg-1.0";
+      reg = <0xf8007000 0x100>;
+      interrupts = <0 8 4>;
+      clocks = <&clkc 12>;
+      clock-names = "ref_clk";
+      syscon = <&slcr>;
+    };
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
new file mode 100644
index 000000000000..ac6a207278d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,versal-fpga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal FPGA driver.
+
+maintainers:
+  - Nava kishore Manne <nava.manne@xilinx.com>
+
+description: |
+  Device Tree Versal FPGA bindings for the Versal SoC, controlled
+  using firmware interface.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xlnx,versal-fpga
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    versal_fpga: versal_fpga {
+         compatible = "xlnx,versal-fpga";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
deleted file mode 100644
index 3052bf619dd5..000000000000
--- a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Devicetree bindings for Zynq Ultrascale MPSoC FPGA Manager.
-The ZynqMP SoC uses the PCAP (Processor configuration Port) to configure the
-Programmable Logic (PL). The configuration uses  the firmware interface.
-
-Required properties:
-- compatible: should contain "xlnx,zynqmp-pcap-fpga"
-
-Example for full FPGA configuration:
-
-	fpga-region0 {
-		compatible = "fpga-region";
-		fpga-mgr = <&zynqmp_pcap>;
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-	};
-
-	firmware {
-		zynqmp_firmware: zynqmp-firmware {
-			compatible = "xlnx,zynqmp-firmware";
-			method = "smc";
-			zynqmp_pcap: pcap {
-				compatible = "xlnx,zynqmp-pcap-fpga";
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
new file mode 100644
index 000000000000..00a8d92ff736
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale MPSoC FPGA Manager
+
+maintainers:
+  - Nava kishore Manne <navam@xilinx.com>
+
+description: |
+  Device Tree Bindings for Zynq Ultrascale MPSoC FPGA Manager.
+  The ZynqMP SoC uses the PCAP (Processor Configuration Port) to
+  configure the Programmable Logic (PL). The configuration uses the
+  firmware interface.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-pcap-fpga
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+      zynqmp_firmware: zynqmp-firmware {
+        zynqmp_pcap: pcap {
+          compatible = "xlnx,zynqmp-pcap-fpga";
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
index b758f91914f7..9853fefff5d8 100644
--- a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
@@ -12,6 +12,13 @@ Required properties:
  - pinctrl-0: phandle to pinctrl node
  - pinctrl-names: pinctrl state
 
+Optional properties:
+ - cfam-reset-gpios: GPIO for CFAM reset
+
+ - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled)
+ - fsi-mux-gpios: GPIO for detecting the desired FSI mux state
+
+
 Examples:
 
     fsi-master {
@@ -21,4 +28,9 @@ Examples:
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fsi1_default>;
 	clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+
+	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
     };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
new file mode 100644
index 000000000000..e2ca0b000471
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,fsi2spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SPI controllers
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
+  node will always be a child of an FSI CFAM node; see fsi.txt for details on
+  FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of
+  SPI controllers.
+
+properties:
+  compatible:
+    enum:
+      - ibm,fsi2spi
+
+  reg:
+    items:
+      - description: FSI slave address
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    fsi2spi@1c00 {
+        compatible = "ibm,fsi2spi";
+        reg = <0x1c00 0x400>;
+    };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
index 99ca9862a586..e73358075a90 100644
--- a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
@@ -1,13 +1,13 @@
-Device-tree bindings for FSI-attached POWER9 On-Chip Controller (OCC)
----------------------------------------------------------------------
+Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
+-----------------------------------------------------------------------------
 
-This is the binding for the P9 On-Chip Controller accessed over FSI from a
-service processor. See fsi.txt for details on bindings for FSI slave and CFAM
+This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
+a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
 nodes. The OCC is not an FSI slave device itself, rather it is accessed
-through the SBE fifo.
+through the SBE FIFO.
 
 Required properties:
- - compatible = "ibm,p9-occ"
+ - compatible = "ibm,p9-occ" or "ibm,p10-occ"
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
deleted file mode 100644
index 41372d441131..000000000000
--- a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block.
-
-Required properties:
-- compatible : For Tegra20, must contain "nvidia,tegra20-efuse".  For Tegra30,
-  must contain "nvidia,tegra30-efuse".  For Tegra114, must contain
-  "nvidia,tegra114-efuse".  For Tegra124, must contain "nvidia,tegra124-efuse".
-  Otherwise, must contain "nvidia,<chip>-efuse", plus one of the above, where
-  <chip> is tegra132.
-  Details:
-  nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
-	due to a hardware bug. Tegra20 also lacks certain information which is
-	available in later generations such as fab code, lot code, wafer id,..
-  nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse:
-	The differences between these SoCs are the size of the efuse array,
-	the location of the spare (OEM programmable) bits and the location of
-	the speedo data.
-- reg: Should contain 1 entry: the entry gives the physical address and length
-       of the fuse registers.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - fuse
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
- - fuse
-
-Example:
-
-	fuse@7000f800 {
-		compatible = "nvidia,tegra20-efuse";
-		reg = <0x7000f800 0x400>,
-		      <0x70000000 0x400>;
-		clocks = <&tegra_car TEGRA20_CLK_FUSE>;
-		clock-names = "fuse";
-		resets = <&tegra_car 39>;
-		reset-names = "fuse";
-	};
-
-
diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.yaml b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.yaml
new file mode 100644
index 000000000000..481901269872
--- /dev/null
+++ b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fuse/nvidia,tegra20-fuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra FUSE block
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-efuse
+          - nvidia,tegra30-efuse
+          - nvidia,tegra114-efuse
+          - nvidia,tegra124-efuse
+          - nvidia,tegra210-efuse
+          - nvidia,tegra186-efuse
+          - nvidia,tegra194-efuse
+          - nvidia,tegra234-efuse
+
+      - items:
+          - const: nvidia,tegra132-efuse
+          - const: nvidia,tegra124-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fuse
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: fuse
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - nvidia,tegra20-efuse
+          - nvidia,tegra30-efuse
+          - nvidia,tegra114-efuse
+          - nvidia,tegra124-efuse
+          - nvidia,tegra132-efuse
+          - nvidia,tegra210-efuse
+then:
+  required:
+    - resets
+    - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    fuse@7000f800 {
+        compatible = "nvidia,tegra20-efuse";
+        reg = <0x7000f800 0x400>;
+        clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+        clock-names = "fuse";
+        resets = <&tegra_car 39>;
+        reset-names = "fuse";
+    };
diff --git a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
new file mode 100644
index 000000000000..c21549e0fba6
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/brcm,bcm4751.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4751 family GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Broadcom GPS chips can be used over the UART or I2C bus. The UART
+  bus requires CTS/RTS support. The number of the capsule is more
+  elaborate than the compatibles BCM4751 may be printed
+  BCM4751IFBG for example.
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4751
+      - brcm,bcm4752
+      - brcm,bcm4753
+
+  reg:
+    description:
+      The I2C Address, not required on UART buses.
+
+  vdd-auxin-supply:
+    description:
+      Main voltage supply, pin name VDD_AUXIN, typically connected
+      directly to a battery such as LiIon 3.8V battery or a 2.6V supply.
+
+  vddio-supply:
+    description:
+      IO voltage supply, pin name VDDIO, typically 1.8V
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional active low reset line, should be flagged with
+      GPIO_ACTIVE_LOW.
+
+  enable-gpios:
+    description: Enable GPIO line, connected to pins named REGPU or NSTANDBY.
+      If the line is active low such as NSTANDBY, it should be tagged
+      GPIO_ACTIVE_LOW.
+
+required:
+  - compatible
+  - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "brcm,bcm4751";
+            vdd-auxin-supply = <&vbat>;
+            reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+            current-speed = <38400>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/gnss-common.yaml b/Documentation/devicetree/bindings/gnss/gnss-common.yaml
new file mode 100644
index 000000000000..963b926e30a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/gnss-common.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/gnss-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Global Navigation Satellite Systems (GNSS)
+  receiver devices
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description: |
+  This document defines device tree properties common to Global Navigation
+  Satellite System receivers.
+
+properties:
+  $nodename:
+    pattern: "^gnss(@.*)?$"
+
+  lna-supply:
+    description: A separate regulator supplying power for the Low Noise
+      Amplifier (LNA). This is an amplifier connected between the GNSS
+      device and the receiver antenna.
+
+  enable-gpios:
+    description: A GPIO line that will enable the GNSS receiver when
+      asserted. If this line is active low, the GPIO phandle should
+      consequently be tagged with the GPIO_ACTIVE_LOW flag so the operating
+      system can rely on asserting the line to enable the GNSS device.
+    maxItems: 1
+
+  timepulse-gpios:
+    description: When a timepulse is provided to the GNSS device using a
+      GPIO line, this is used.
+    maxItems: 1
+
+  current-speed:
+    description: The baudrate in bits per second of the device as it comes
+      online, current active speed.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+      gnss {
+        compatible = "u-blox,neo-8";
+        vcc-supply = <&gnss_reg>;
+        timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+        current-speed = <4800>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt
deleted file mode 100644
index f547bd4549fe..000000000000
--- a/Documentation/devicetree/bindings/gnss/gnss.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-GNSS Receiver DT binding
-
-This documents the binding structure and common properties for GNSS receiver
-devices.
-
-A GNSS receiver node is a node named "gnss" and typically resides on a serial
-bus (e.g. UART, I2C or SPI).
-
-Please refer to the following documents for generic properties:
-
-	Documentation/devicetree/bindings/serial/slave-device.txt
-	Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Required properties:
-
-- compatible	: A string reflecting the vendor and specific device the node
-		  represents
-
-Optional properties:
-- lna-supply	: Separate supply for an LNA
-- enable-gpios	: GPIO used to enable the device
-- timepulse-gpios	: Time pulse GPIO
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "u-blox,neo-8";
-
-		vcc-supply = <&gnss_reg>;
-		timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-
-		current-speed = <4800>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.txt b/Documentation/devicetree/bindings/gnss/mediatek.txt
deleted file mode 100644
index 80cb802813c5..000000000000
--- a/Documentation/devicetree/bindings/gnss/mediatek.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Mediatek-based GNSS Receiver DT binding
-
-Mediatek chipsets are used in GNSS-receiver modules produced by several
-vendors and can use a UART interface.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible	: Must be
-
-			"globaltop,pa6h"
-
-- vcc-supply	: Main voltage regulator (pin name: VCC)
-
-Optional properties:
-
-- current-speed		: Default UART baud rate
-- gnss-fix-gpios	: GPIO used to determine device position fix state
-			  (pin name: FIX, 3D_FIX)
-- reset-gpios		: GPIO used to reset the device (pin name: RESET, NRESET)
-- timepulse-gpios	: Time pulse GPIO (pin name: PPS1, 1PPS)
-- vbackup-supply	: Backup voltage regulator (pin name: VBAT, VBACKUP)
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "globaltop,pa6h";
-		vcc-supply = <&vcc_3v3>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.yaml b/Documentation/devicetree/bindings/gnss/mediatek.yaml
new file mode 100644
index 000000000000..c0eb35beb2ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/mediatek.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/mediatek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description:
+  Mediatek chipsets are used in GNSS-receiver modules produced by several
+  vendors and can use a UART interface.
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+properties:
+  compatible:
+    const: globaltop,pa6h
+
+  vcc-supply:
+    description:
+      Main voltage regulator, pin name VCC.
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional reset line, with names such as RESET or NRESET.
+      If the line is active low it should be flagged with GPIO_ACTIVE_LOW.
+
+  timepulse-gpios:
+    description: Comes with pin names such as PPS1 or 1PPS.
+
+  gnss-fix-gpios:
+    maxItems: 1
+    description: GPIO used to determine device position fix state, pin names
+      FIX or 3D_FIX.
+
+  vbackup-supply:
+    description:
+      Regulator providing backup voltage, pin names such as VBAT or VBACKUP.
+
+required:
+  - compatible
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "globaltop,pa6h";
+            vcc-supply = <&vcc_3v3>;
+            reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.txt b/Documentation/devicetree/bindings/gnss/sirfstar.txt
deleted file mode 100644
index f4252b6b660b..000000000000
--- a/Documentation/devicetree/bindings/gnss/sirfstar.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SiRFstar-based GNSS Receiver DT binding
-
-SiRFstar chipsets are used in GNSS-receiver modules produced by several
-vendors and can use UART, SPI or I2C interfaces.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible	: Must be one of
-
-			"fastrax,uc430"
-			"linx,r4"
-			"wi2wi,w2sg0004"
-			"wi2wi,w2sg0008i"
-			"wi2wi,w2sg0084i"
-
-- vcc-supply	: Main voltage regulator (pin name: 3V3_IN, VCC, VDD)
-
-Required properties (I2C):
-- reg		: I2C slave address
-
-Required properties (SPI):
-- reg		: SPI chip select address
-
-Optional properties:
-
-- sirf,onoff-gpios	: GPIO used to power on and off device (pin name: ON_OFF)
-- sirf,wakeup-gpios	: GPIO used to determine device power state
-			  (pin name: RFPWRUP, WAKEUP)
-- timepulse-gpios	: Time pulse GPIO (pin name: 1PPS, TM)
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "wi2wi,w2sg0084i";
-
-		vcc-supply = <&gnss_reg>;
-		sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.yaml b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
new file mode 100644
index 000000000000..0bbe684d82e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/sirfstar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiRFstar GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description:
+  The SiRFstar GNSS receivers have incarnated over the years in different
+  chips, starting from the SiRFstarIII which was a chip that was introduced in
+  2004 and used in a lot of dedicated GPS devices. In 2009 SiRF was acquired
+  by CSR (Cambridge Silicon Radio) and in 2012 the CSR GPS business was
+  acquired by Samsung, while some products remained with CSR. In 2014 CSR
+  was acquired by Qualcomm who still sell some of the SiRF products.
+
+  SiRF chips can be used over UART, I2C or SPI buses.
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - csr,gsd4t
+      - csr,csrg05ta03-icje-r
+      - fastrax,uc430
+      - linx,r4
+      - wi2wi,w2sg0004
+      - wi2wi,w2sg0008i
+      - wi2wi,w2sg0084i
+
+  reg:
+    description:
+      The I2C Address, SPI chip select address. Not required on UART buses.
+
+  vcc-supply:
+    description:
+      Main voltage regulator, pin names such as 3V3_IN, VCC, VDD.
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional active low reset line, should be flagged with
+      GPIO_ACTIVE_LOW.
+
+  sirf,onoff-gpios:
+    maxItems: 1
+    description: GPIO used to power on and off device, pin name ON_OFF.
+
+  sirf,wakeup-gpios:
+    maxItems: 1
+    description: GPIO used to determine device power state, pin names such
+      as RFPWRUP, WAKEUP.
+
+required:
+  - compatible
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "wi2wi,w2sg0084i";
+            vcc-supply = <&gnss_vcc_reg>;
+            reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+            sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+            sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+            current-speed = <38400>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
new file mode 100644
index 000000000000..4835a280b3bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/u-blox,neo-6m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-blox GNSS Receiver
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description: >
+  The U-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces.
+
+properties:
+  compatible:
+    enum:
+      - u-blox,neo-6m
+      - u-blox,neo-8
+      - u-blox,neo-m8
+
+  reg:
+    description: >
+      The DDC Slave Address, SPI chip select address, the number of the USB hub
+      port or the USB host-controller port to which this device is attached,
+      depending on the bus used. Required for the DDC, SPI or USB busses.
+
+  vcc-supply:
+    description: >
+      Main voltage regulator
+
+  u-blox,extint-gpios:
+    maxItems: 1
+    description: >
+      GPIO connected to the "external interrupt" input pin
+
+  v-bckp-supply:
+    description: >
+      Backup voltage regulator
+
+required:
+  - compatible
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial {
+        gnss {
+            compatible = "u-blox,neo-8";
+            v-bckp-supply = <&gnss_v_bckp_reg>;
+            vcc-supply = <&gnss_vcc_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/u-blox.txt b/Documentation/devicetree/bindings/gnss/u-blox.txt
deleted file mode 100644
index 7cdefd058fe0..000000000000
--- a/Documentation/devicetree/bindings/gnss/u-blox.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-u-blox GNSS Receiver DT binding
-
-The u-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible	: Must be one of
-
-			"u-blox,neo-6m"
-			"u-blox,neo-8"
-			"u-blox,neo-m8"
-
-- vcc-supply	: Main voltage regulator
-
-Required properties (DDC):
-- reg		: DDC (I2C) slave address
-
-Required properties (SPI):
-- reg		: SPI chip select address
-
-Required properties (USB):
-- reg		: Number of the USB hub port or the USB host-controller port
-                  to which this device is attached
-
-Optional properties:
-
-- timepulse-gpios	: Time pulse GPIO
-- u-blox,extint-gpios	: GPIO connected to the "external interrupt" input pin
-- v-bckp-supply	: Backup voltage regulator
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "u-blox,neo-8";
-
-		v-bckp-supply = <&gnss_v_bckp_reg>;
-		vcc-supply = <&gnss_vcc_reg>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
new file mode 100644
index 000000000000..7c41d8e814cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/airoha,en7523-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7523 GPIO controller
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+description: |
+  Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
+  GPIOs.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: airoha,en7523-gpio
+
+  reg:
+    description: |
+      The first tuple points to the input register.
+      The second and third tuple point to the direction registers
+      The fourth tuple points to the output register
+    maxItems: 4
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@1fbf0200 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0204 0x4>,
+              <0x1fbf0200 0x4>,
+              <0x1fbf0220 0x4>,
+              <0x1fbf0214 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+    gpio1: gpio@1fbf0270 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0270 0x4>,
+              <0x1fbf0260 0x4>,
+              <0x1fbf0264 0x4>,
+              <0x1fbf0278 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
new file mode 100644
index 000000000000..46bb121360dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/aspeed,sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SGPIO controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description:
+  This SGPIO controller is for ASPEED AST2400, AST2500 and AST2600 SoC,
+  AST2600 have two sgpio master one with 128 pins another one with 80 pins,
+  AST2500/AST2400 have one sgpio master with 80 pins. Each of the Serial
+  GPIO pins can be programmed to support the following options
+  - Support interrupt option for each input port and various interrupt
+    sensitivity option (level-high, level-low, edge-high, edge-low)
+  - Support reset tolerance option for each output port
+  - Directly connected to APB bus and its shift clock is from APB bus clock
+    divided by a programmable value.
+  - Co-work with external signal-chained TTL components (74LV165/74LV595)
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-sgpio
+      - aspeed,ast2500-sgpio
+      - aspeed,ast2600-sgpiom
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  clocks:
+    maxItems: 1
+
+  ngpios: true
+
+  bus-frequency: true
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupts
+  - interrupt-controller
+  - ngpios
+  - clocks
+  - bus-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    sgpio: sgpio@1e780200 {
+        #gpio-cells = <2>;
+        compatible = "aspeed,ast2500-sgpio";
+        gpio-controller;
+        interrupts = <40>;
+        reg = <0x1e780200 0x0100>;
+        clocks = <&syscon ASPEED_CLK_APB>;
+        interrupt-controller;
+        ngpios = <80>;
+        bus-frequency = <12000000>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
deleted file mode 100644
index e7853143fa42..000000000000
--- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Bindings for the Broadcom's brcm,bcm6345-gpio memory-mapped GPIO controllers.
-
-These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
-are the only ones which don't need a pinctrl driver.
-BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
-and/or written, and the direction changed from input to output.
-BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
-and/or written, and the direction changed from input to output.
-
-Required properties:
-	- compatible: should be "brcm,bcm6345-gpio"
-	- reg-names: must contain
-		"dat" - data register
-		"dirout" - direction (output) register
-	- reg: address + size pairs describing the GPIO register sets;
-		order must correspond with the order of entries in reg-names
-	- #gpio-cells: must be set to 2. The first cell is the pin number and
-			the second cell is used to specify the gpio polarity:
-			0 = active high
-			1 = active low
-	- gpio-controller: Marks the device node as a gpio controller.
-
-Optional properties:
-	- native-endian: use native endian memory.
-
-Examples:
-	- BCM6338:
-	gpio: gpio-controller@fffe0407 {
-		compatible = "brcm,bcm6345-gpio";
-		reg-names = "dirout", "dat";
-		reg = <0xfffe0407 1>, <0xfffe040f 1>;
-
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	- BCM6345:
-	gpio: gpio-controller@fffe0406 {
-		compatible = "brcm,bcm6345-gpio";
-		reg-names = "dirout", "dat";
-		reg = <0xfffe0406 2>, <0xfffe040a 2>;
-		native-endian;
-
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
new file mode 100644
index 000000000000..4d69f79df859
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6345 GPIO controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+  Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers.
+
+  These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
+  are the only ones which don't need a pinctrl driver.
+
+  BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
+  and/or written, and the direction changed from input to output.
+  BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
+  and/or written, and the direction changed from input to output.
+  BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data
+  and dirout registers, where GPIO state can be read and/or written, and the
+  direction changed from input to output.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6318-gpio
+      - brcm,bcm6328-gpio
+      - brcm,bcm6345-gpio
+      - brcm,bcm6358-gpio
+      - brcm,bcm6362-gpio
+      - brcm,bcm6368-gpio
+      - brcm,bcm63268-gpio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  native-endian: true
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: dirout
+      - const: dat
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@fffe0406 {
+      compatible = "brcm,bcm6345-gpio";
+      reg-names = "dirout", "dat";
+      reg = <0xfffe0406 2>, <0xfffe040a 2>;
+      native-endian;
+
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+  - |
+    gpio@0 {
+      compatible = "brcm,bcm63268-gpio";
+      reg-names = "dirout", "dat";
+      reg = <0x0 0x8>, <0x8 0x8>;
+
+      gpio-controller;
+      gpio-ranges = <&pinctrl 0 0 52>;
+      #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
deleted file mode 100644
index 5d468ecd1809..000000000000
--- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Broadcom STB "UPG GIO" GPIO controller
-
-The controller's registers are organized as sets of eight 32-bit
-registers with each set controlling a bank of up to 32 pins.  A single
-interrupt is shared for all of the banks handled by the controller.
-
-Required properties:
-
-- compatible:
-    Must be "brcm,brcmstb-gpio"
-
-- reg:
-    Define the base and range of the I/O address space containing
-    the brcmstb GPIO controller registers
-
-- #gpio-cells:
-    Should be <2>.  The first cell is the pin number (within the controller's
-    pin space), and the second is used for the following:
-    bit[0]: polarity (0 for active-high, 1 for active-low)
-
-- gpio-controller:
-    Specifies that the node is a GPIO controller.
-
-- brcm,gpio-bank-widths:
-    Number of GPIO lines for each bank.  Number of elements must
-    correspond to number of banks suggested by the 'reg' property.
-
-Optional properties:
-
-- interrupts:
-    The interrupt shared by all GPIO lines for this controller.
-
-- interrupts-extended:
-    Alternate form of specifying interrupts and parents that allows for
-    multiple parents.  This takes precedence over 'interrupts' and
-    'interrupt-parent'.  Wakeup-capable GPIO controllers often route their
-    wakeup interrupt lines through a different interrupt controller than the
-    primary interrupt line, making this property necessary.
-
-- #interrupt-cells:
-    Should be <2>.  The first cell is the GPIO number, the second should specify
-    flags.  The following subset of flags is supported:
-    - bits[3:0] trigger type and level flags
-        1 = low-to-high edge triggered
-        2 = high-to-low edge triggered
-        4 = active high level-sensitive
-        8 = active low level-sensitive
-      Valid combinations are 1, 2, 3, 4, 8.
-    See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-- interrupt-controller:
-    Marks the device node as an interrupt controller
-
-- wakeup-source:
-    GPIOs for this controller can be used as a wakeup source
-
-Example:
-	upg_gio: gpio@f040a700 {
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
-		gpio-controller;
-		interrupt-controller;
-		reg = <0xf040a700 0x80>;
-		interrupt-parent = <&irq0_intc>;
-		interrupts = <0x6>;
-		brcm,gpio-bank-widths = <32 32 32 24>;
-	};
-
-	upg_gio_aon: gpio@f04172c0 {
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
-		gpio-controller;
-		interrupt-controller;
-		reg = <0xf04172c0 0x40>;
-		interrupt-parent = <&irq0_aon_intc>;
-		interrupts = <0x6>;
-		interrupts-extended = <&irq0_aon_intc 0x6>,
-			<&aon_pm_l2_intc 0x5>;
-		wakeup-source;
-		brcm,gpio-bank-widths = <18 4>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
new file mode 100644
index 000000000000..4a896ff7edc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB "UPG GIO" GPIO controller
+
+description: >
+  The controller's registers are organized as sets of eight 32-bit
+  registers with each set controlling a bank of up to 32 pins.  A single
+  interrupt is shared for all of the banks handled by the controller.
+
+maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7445-gpio
+      - const: brcm,brcmstb-gpio
+
+  reg:
+    maxItems: 1
+    description: >
+      Define the base and range of the I/O address space containing
+      the brcmstb GPIO controller registers
+
+  "#gpio-cells":
+    const: 2
+    description: >
+      The first cell is the pin number (within the controller's
+      pin space), and the second is used for the following:
+      bit[0]: polarity (0 for active-high, 1 for active-low)
+
+  gpio-controller: true
+
+  brcm,gpio-bank-widths:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      Number of GPIO lines for each bank.  Number of elements must
+      correspond to number of banks suggested by the 'reg' property.
+
+  interrupts:
+    maxItems: 1
+    description: >
+      The interrupt shared by all GPIO lines for this controller.
+
+  "#interrupt-cells":
+    const: 2
+    description: |
+      The first cell is the GPIO number, the second should specify
+      flags.  The following subset of flags is supported:
+      - bits[3:0] trigger type and level flags
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        4 = active high level-sensitive
+        8 = active low level-sensitive
+      Valid combinations are 1, 2, 3, 4, 8.
+
+  interrupt-controller: true
+
+  wakeup-source:
+    type: boolean
+    description: >
+      GPIOs for this controller can be used as a wakeup source
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - "brcm,gpio-bank-widths"
+
+additionalProperties: false
+
+examples:
+  - |
+    upg_gio: gpio@f040a700 {
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+        gpio-controller;
+        interrupt-controller;
+        reg = <0xf040a700 0x80>;
+        interrupt-parent = <&irq0_intc>;
+        interrupts = <0x6>;
+        brcm,gpio-bank-widths = <32 32 32 24>;
+    };
+
+    upg_gio_aon: gpio@f04172c0 {
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+        gpio-controller;
+        interrupt-controller;
+        reg = <0xf04172c0 0x40>;
+        interrupt-parent = <&irq0_aon_intc>;
+        interrupts = <0x6>;
+        wakeup-source;
+        brcm,gpio-bank-widths = <18 4>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
index 64e279a4bc10..c213cb9ddb9f 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
@@ -19,15 +19,13 @@ properties:
 
   reg:
     items:
-      - description: the I/O address containing the GPIO controller
-                     registers.
-      - description: the I/O address containing the Chip Common A interrupt
-                     registers.
+      - description: the I/O address containing the GPIO controller registers.
+      - description: the I/O address containing the Chip Common A interrupt registers.
 
   gpio-controller: true
 
   '#gpio-cells':
-      const: 2
+    const: 2
 
   ngpios:
     minimum: 0
@@ -47,6 +45,8 @@ required:
   - "#gpio-cells"
   - gpio-controller
 
+additionalProperties: false
+
 dependencies:
   interrupt-controller: [ interrupts ]
 
diff --git a/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml b/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
new file mode 100644
index 000000000000..e3e668a12091
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/delta,tn48m-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD GPIO controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  This module is part of the Delta TN48M multi-function device. For more
+  details see ../mfd/delta,tn48m-cpld.yaml.
+
+  Delta TN48M has an onboard Lattice CPLD that is used as an GPIO expander.
+  It provides 12 pins in total, they are input-only or ouput-only type.
+
+properties:
+  compatible:
+    enum:
+      - delta,tn48m-gpo
+      - delta,tn48m-gpi
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
new file mode 100644
index 000000000000..c0ad70e66f76
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fairchild,74hc595.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic 8-bit shift register
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - fairchild,74hc595
+      - nxp,74lvc594
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The second cell is only used to specify the GPIO polarity.
+    const: 2
+
+  registers-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of daisy-chained shift registers
+
+  enable-gpios:
+    description: GPIO connected to the OE (Output Enable) pin.
+    maxItems: 1
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    type: object
+
+    properties:
+      gpio-hog: true
+      gpios: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - registers-number
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio5: gpio5@0 {
+                    compatible = "fairchild,74hc595";
+                    reg = <0>;
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    registers-number = <4>;
+                    spi-max-frequency = <100000>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.txt b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.txt
deleted file mode 100644
index d04236558619..000000000000
--- a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Faraday Technology FTGPIO010 GPIO Controller
-
-Required properties:
-
-- compatible : Should be one of
-  "cortina,gemini-gpio", "faraday,ftgpio010"
-  "moxa,moxart-gpio", "faraday,ftgpio010"
-  "faraday,ftgpio010"
-- reg : Should contain registers location and length
-- interrupts : Should contain the interrupt line for the GPIO block
-- gpio-controller : marks this as a GPIO controller
-- #gpio-cells : Should be 2, see gpio/gpio.txt
-- interrupt-controller : marks this as an interrupt controller
-- #interrupt-cells : a standard two-cell interrupt flag, see
-  interrupt-controller/interrupts.txt
-
-Example:
-
-gpio@4d000000 {
-	compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
-	reg = <0x4d000000 0x100>;
-	interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml
new file mode 100644
index 000000000000..640da5b9b0cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/faraday,ftgpio010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTGPIO010 GPIO Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: cortina,gemini-gpio
+          - const: faraday,ftgpio010
+      - items:
+          - const: moxa,moxart-gpio
+          - const: faraday,ftgpio010
+      - const: faraday,ftgpio010
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Should contain the interrupt line for the GPIO block
+
+  gpio-controller: true
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio@4d000000 {
+      compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+      reg = <0x4d000000 0x100>;
+      interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml
new file mode 100644
index 000000000000..b7b32220935d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fsl,imx8qxp-sc-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO driver over IMX SCU firmware API
+
+maintainers:
+  - Shenwei Wang <shenwei.wang@nxp.com>
+
+description: |
+  This module provides the standard interface to control the
+  resource pins in SCU domain on i.MX8 platforms.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qxp-sc-gpio
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio {
+        compatible = "fsl,imx8qxp-sc-gpio";
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
deleted file mode 100644
index b4cd9f906c24..000000000000
--- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Freescale i.MX/MXC GPIO controller
-
-Required properties:
-- compatible : Should be "fsl,<soc>-gpio"
-- reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all 32 pins, if
-  one number.  If two numbers, the first one is the interrupt shared
-  by low 16 pins and the second one is for high 16 pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
-  The second cell bits[3:0] is used to specify trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-
-Optional properties:
-- clocks: the clock for clocking the GPIO silicon
-
-Example:
-
-gpio0: gpio@73f84000 {
-	compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
-	reg = <0x73f84000 0x4000>;
-	interrupts = <50 51>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
new file mode 100644
index 000000000000..ae18603697d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX/MXC GPIO controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx1-gpio
+          - fsl,imx21-gpio
+          - fsl,imx31-gpio
+          - fsl,imx35-gpio
+          - fsl,imx7d-gpio
+      - items:
+          - const: fsl,imx35-gpio
+          - const: fsl,imx31-gpio
+      - items:
+          - enum:
+              - fsl,imx50-gpio
+              - fsl,imx51-gpio
+              - fsl,imx53-gpio
+              - fsl,imx6q-gpio
+              - fsl,imx6sl-gpio
+              - fsl,imx6sll-gpio
+              - fsl,imx6sx-gpio
+              - fsl,imx6ul-gpio
+              - fsl,imx7d-gpio
+              - fsl,imx8mm-gpio
+              - fsl,imx8mn-gpio
+              - fsl,imx8mp-gpio
+              - fsl,imx8mq-gpio
+              - fsl,imx8qxp-gpio
+              - fsl,imxrt1050-gpio
+              - fsl,imxrt1170-gpio
+          - const: fsl,imx35-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      Should be the port interrupt shared by all 32 pins, if one number.
+      If two numbers, the first one is the interrupt shared by low 16 pins
+      and the second one is for high 16 pins.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+  gpio-line-names: true
+  gpio-ranges: true
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    type: object
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@73f84000 {
+        compatible = "fsl,imx35-gpio";
+        reg = <0x73f84000 0x4000>;
+        interrupts = <50 51>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt
deleted file mode 100644
index 2a97553d8d76..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Generic 8-bits shift register GPIO driver
-
-Required properties:
-- compatible: Should contain one of the following:
-    "fairchild,74hc595"
-    "nxp,74lvc594"
-- reg : chip select number
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-- registers-number: Number of daisy-chained shift registers
-
-Optional properties:
-- enable-gpios: GPIO connected to the OE (Output Enable) pin.
-
-Example:
-
-gpio5: gpio5@0 {
-	compatible = "fairchild,74hc595";
-	reg = <0>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	registers-number = <4>;
-	spi-max-frequency = <100000>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
index 146e554b3c67..2a80e272cd66 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-altera.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -9,8 +9,9 @@ Required properties:
   - The second cell is reserved and is currently unused.
 - gpio-controller : Marks the device node as a GPIO controller.
 - interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
   - The first cell is the GPIO offset number within the GPIO controller.
+  - The second cell is the interrupt trigger type and level flags.
 - interrupts: Specify the interrupt.
 - altr,interrupt-type: Specifies the interrupt trigger type the GPIO
   hardware is synthesized. This field is required if the Altera GPIO controller
@@ -38,6 +39,6 @@ gpio_altr: gpio@ff200000 {
 	altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
 	#gpio-cells = <2>;
 	gpio-controller;
-	#interrupt-cells = <1>;
+	#interrupt-cells = <2>;
 	interrupt-controller;
 };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt b/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt
deleted file mode 100644
index d7e123fc90b5..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-CSR SiRFatlas7 GPIO controller bindings
-
-Required properties:
-- compatible	: "sirf,atlas7-gpio"
-- reg		: Address range of the pinctrl registers
-- interrupts	: Interrupts used by every GPIO group
-- gpio-banks	: How many gpio banks on this controller
-- gpio-controller : Indicates this device is a GPIO controller
-- interrupt-controller  : Marks the device node as an interrupt controller
-
-The GPIO controller also acts as an interrupt controller. It uses the default
-two cells specifier as described in Documentation/devicetree/bindings/
-interrupt-controller/interrupts.txt.
-
-Example:
-
-	gpio_0: gpio_mediam@17040000 {
-		compatible = "sirf,atlas7-gpio";
-		reg = <0x17040000 0x1000>;
-		interrupts = <0 13 0>, <0 14 0>;
-
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-
-		gpio-controller;
-		interrupt-controller;
-
-		gpio-banks = <2>;
-		gpio-ranges = <&pinctrl 0 0 0>,
-				<&pinctrl 32 0 0>;
-		gpio-ranges-group-names = "lvds_gpio_grp",
-					"uart_nand_gpio_grp";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			gpios = <&gpio_1 15 0>;
-			...
-		};
-
-		led2 {
-			gpios = <&gpio_2 34 0>;
-			...
-		};
-	};
-
-Please refer to gpio.txt in this directory for details of the common
-gpio properties used by devices.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
deleted file mode 100644
index fc42b2caa06d..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-AXP209 GPIO & pinctrl controller
-
-This driver follows the usual GPIO bindings found in
-Documentation/devicetree/bindings/gpio/gpio.txt
-
-This driver follows the usual pinctrl bindings found in
-Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-This driver employs the per-pin muxing pattern.
-
-Required properties:
-- compatible: Should be one of:
-	- "x-powers,axp209-gpio"
-	- "x-powers,axp813-gpio"
-- #gpio-cells: Should be two. The first cell is the pin number and the
-  second is the GPIO flags.
-- gpio-controller: Marks the device node as a GPIO controller.
-
-This node must be a subnode of the axp20x PMIC, documented in
-Documentation/devicetree/bindings/mfd/axp20x.txt
-
-Example:
-
-axp209: pmic@34 {
-	compatible = "x-powers,axp209";
-	reg = <0x34>;
-	interrupt-parent = <&nmi_intc>;
-	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	axp_gpio: gpio {
-		compatible = "x-powers,axp209-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-The GPIOs can be muxed to other functions and therefore, must be a subnode of
-axp_gpio.
-
-Example:
-
-&axp_gpio {
-	gpio0_adc: gpio0-adc {
-		pins = "GPIO0";
-		function = "adc";
-	};
-};
-
-&example_node {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio0_adc>;
-};
-
-GPIOs and their functions
--------------------------
-
-Each GPIO is independent from the other (i.e. GPIO0 in gpio_in function does
-not force GPIO1 and GPIO2 to be in gpio_in function as well).
-
-axp209
-------
-GPIO	|	Functions
-------------------------
-GPIO0	|	gpio_in, gpio_out, ldo, adc
-GPIO1	|	gpio_in, gpio_out, ldo, adc
-GPIO2	|	gpio_in, gpio_out
-
-axp813
-------
-GPIO	|	Functions
-------------------------
-GPIO0	|	gpio_in, gpio_out, ldo, adc
-GPIO1	|	gpio_in, gpio_out, ldo
diff --git a/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
new file mode 100644
index 000000000000..40d0be31e200
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-consumer-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common GPIO lines
+
+maintainers:
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Pay attention to using proper GPIO flag (e.g. GPIO_ACTIVE_LOW) for the GPIOs
+  using inverted signal (e.g. RESETN).
+
+select: true
+
+properties:
+  enable-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the enable control pin.
+
+  reset-gpios:
+    description:
+      GPIO (or GPIOs for power sequence) connected to the device reset pin
+      (e.g. RESET or RESETN).
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the power down pin (hardware power down or power cut,
+      e.g. PD or PWDN).
+
+  pwdn-gpios:
+    maxItems: 1
+    description: Use powerdown-gpios
+    deprecated: true
+
+  wakeup-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the pin waking up the device from suspend or other
+      power-saving modes.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mmc-pwrseq-simple
+    then:
+      properties:
+        reset-gpios:
+          minItems: 1
+          maxItems: 32
+    else:
+      properties:
+        reset-gpios:
+          maxItems: 1
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
deleted file mode 100644
index cd91d61eac31..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
+++ /dev/null
@@ -1,166 +0,0 @@
-Davinci/Keystone GPIO controller bindings
-
-Required Properties:
-- compatible: should be "ti,dm6441-gpio": for Davinci da850 SoCs
-			"ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L,
-						66AK2E SoCs
-			"ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G
-			"ti,am654-gpio", "ti,keystone-gpio": for TI K3 AM654
-			"ti,j721e-gpio", "ti,keystone-gpio": for J721E SoCs
-
-- reg: Physical base address of the controller and the size of memory mapped
-       registers.
-
-- gpio-controller : Marks the device node as a gpio controller.
-
-- #gpio-cells : Should be two.
-  - first cell is the pin number
-  - second cell is used to specify optional parameters (unused)
-
-- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are
-	      supported at a time.
-
-- ti,ngpio: The number of GPIO pins supported.
-
-- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt
-		            line to processor.
-
-- clocks: Should contain the device's input clock, and should be defined as per
-          the appropriate clock bindings consumer usage in,
-
-          Documentation/devicetree/bindings/clock/keystone-gate.txt
-                            for 66AK2HK/66AK2L/66AK2E SoCs or,
-
-          Documentation/devicetree/bindings/clock/ti,sci-clk.txt
-                            for 66AK2G SoCs
-
-- clock-names: Name should be "gpio";
-
-Currently clock-names and clocks are needed for all keystone 2 platforms
-Davinci platforms do not have DT clocks as of now.
-
-The GPIO controller also acts as an interrupt controller. It uses the default
-two cells specifier as described in Documentation/devicetree/bindings/
-interrupt-controller/interrupts.txt.
-
-Example:
-
-gpio: gpio@1e26000 {
-	compatible = "ti,dm6441-gpio";
-	gpio-controller;
-	#gpio-cells = <2>;
-	reg = <0x226000 0x1000>;
-	interrupt-parent = <&intc>;
-	interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH
-		44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH
-		46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH
-		48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH
-		50 IRQ_TYPE_EDGE_BOTH>;
-	ti,ngpio = <144>;
-	ti,davinci-gpio-unbanked = <0>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
-
-leds {
-	compatible = "gpio-leds";
-
-	led1 {
-		label = "davinci:green:usr1";
-		gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
-		...
-	};
-
-	led2 {
-		label = "davinci:red:debug1";
-		gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-		...
-	};
-};
-
-Example for 66AK2G:
-
-gpio0: gpio@2603000 {
-	compatible = "ti,k2g-gpio", "ti,keystone-gpio";
-	reg = <0x02603000 0x100>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	ti,ngpio = <144>;
-	ti,davinci-gpio-unbanked = <0>;
-	clocks = <&k2g_clks 0x001b 0x0>;
-	clock-names = "gpio";
-};
-
-Example for 66AK2HK/66AK2L/66AK2E:
-
-gpio0: gpio@260bf00 {
-	compatible = "ti,keystone-gpio";
-	reg = <0x0260bf00 0x100>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	/* HW Interrupts mapped to GPIO pins */
-	interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkgpio>;
-	clock-names = "gpio";
-	ti,ngpio = <32>;
-	ti,davinci-gpio-unbanked = <32>;
-};
-
-Example for K3 AM654:
-
-wkup_gpio0: wkup_gpio0@42110000 {
-	compatible = "ti,am654-gpio", "ti,keystone-gpio";
-	reg = <0x42110000 0x100>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-parent = <&intr_wkup_gpio>;
-	interrupts = <59 128>, <59 129>, <59 130>, <59 131>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	ti,ngpio = <56>;
-	ti,davinci-gpio-unbanked = <0>;
-	clocks = <&k3_clks 59 0>;
-	clock-names = "gpio";
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
new file mode 100644
index 000000000000..f32e09ef937c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-davinci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controller for Davinci and keystone devices
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,k2g-gpio
+              - ti,am654-gpio
+              - ti,j721e-gpio
+              - ti,am64-gpio
+          - const: ti,keystone-gpio
+
+      - items:
+          - enum:
+              - ti,dm6441-gpio
+              - ti,keystone-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-ranges: true
+
+  gpio-line-names:
+    description: strings describing the names of each gpio line.
+    minItems: 1
+    maxItems: 100
+
+  "#gpio-cells":
+    const: 2
+    description:
+      first cell is the pin number and second cell is used to specify optional parameters (unused).
+
+  interrupts:
+    description:
+      The interrupts are specified as per the interrupt parent. Only banked
+      or unbanked IRQs are supported at a time. If the interrupts are
+      banked then provide list of interrupts corresponding to each bank, else
+      provide the list of interrupts for each gpio.
+    minItems: 1
+    maxItems: 100
+
+  ti,ngpio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of GPIO pins supported consecutively.
+    minimum: 1
+
+  ti,davinci-gpio-unbanked:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of GPIOs that have an individual interrupt line to processor.
+    minimum: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: gpio
+
+  interrupt-controller: true
+
+  power-domains:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupts
+  - ti,ngpio
+  - ti,davinci-gpio-unbanked
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio0: gpio@2603000 {
+      compatible = "ti,k2g-gpio", "ti,keystone-gpio";
+      reg = <0x02603000 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      ti,ngpio = <144>;
+      ti,davinci-gpio-unbanked = <0>;
+      clocks = <&k2g_clks 0x001b 0x0>;
+      clock-names = "gpio";
+    };
+
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio1: gpio@260bf00 {
+      compatible = "ti,keystone-gpio";
+      reg = <0x0260bf00 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      /* HW Interrupts mapped to GPIO pins */
+      interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&clkgpio>;
+      clock-names = "gpio";
+      ti,ngpio = <32>;
+      ti,davinci-gpio-unbanked = <32>;
+    };
+
+  - |
+    wkup_gpio0: gpio0@42110000 {
+      compatible = "ti,am654-gpio", "ti,keystone-gpio";
+      reg = <0x42110000 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-parent = <&intr_wkup_gpio>;
+      interrupts = <60>, <61>, <62>, <63>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      ti,ngpio = <56>;
+      ti,davinci-gpio-unbanked = <0>;
+      clocks = <&k3_clks 59 0>;
+      clock-names = "gpio";
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max732x.txt b/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
deleted file mode 100644
index b3a9c0c32823..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* MAX732x-compatible I/O expanders
-
-Required properties:
-  - compatible: Should be one of the following:
-    - "maxim,max7319": For the Maxim MAX7319
-    - "maxim,max7320": For the Maxim MAX7320
-    - "maxim,max7321": For the Maxim MAX7321
-    - "maxim,max7322": For the Maxim MAX7322
-    - "maxim,max7323": For the Maxim MAX7323
-    - "maxim,max7324": For the Maxim MAX7324
-    - "maxim,max7325": For the Maxim MAX7325
-    - "maxim,max7326": For the Maxim MAX7326
-    - "maxim,max7327": For the Maxim MAX7327
-  - reg: I2C slave address for this device.
-  - gpio-controller: Marks the device node as a GPIO controller.
-  - #gpio-cells: Should be 2.
-    - first cell is the GPIO number
-    - second cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
-      Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
-
-Optional properties:
-
-  The I/O expander can detect input state changes, and thus optionally act as
-  an interrupt controller. When the expander interrupt line is connected all the
-  following properties must be set. For more information please see the
-  interrupt controller device tree bindings documentation available at
-  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
-
-  - interrupt-controller: Identifies the node as an interrupt controller.
-  - #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
-    - first cell is the pin number
-    - second cell is used to specify flags
-  - interrupts: Interrupt specifier for the controllers interrupt.
-
-Please refer to gpio.txt in this directory for details of the common GPIO
-bindings used by client devices.
-
-Example 1. MAX7325 with interrupt support enabled (CONFIG_GPIO_MAX732X_IRQ=y):
-
-	expander: max7325@6d {
-		compatible = "maxim,max7325";
-		reg = <0x6d>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
-	};
-
-Example 2. MAX7325 with interrupt support disabled (CONFIG_GPIO_MAX732X_IRQ=n):
-
-	expander: max7325@6d {
-		compatible = "maxim,max7325";
-		reg = <0x6d>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
deleted file mode 100644
index 2e097b57f170..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-* Marvell EBU GPIO controller
-
-Required properties:
-
-- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio",
-  "marvell,armadaxp-gpio" or "marvell,armada-8k-gpio".
-
-    "marvell,orion-gpio" should be used for Orion, Kirkwood, Dove,
-    Discovery (except MV78200) and Armada 370. "marvell,mv78200-gpio"
-    should be used for the Discovery MV78200.
-
-    "marvel,armadaxp-gpio" should be used for all Armada XP SoCs
-    (MV78230, MV78260, MV78460).
-
-    "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K
-    SoCs (either from AP or CP), see
-    Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
-    for specific details about the offset property.
-
-- reg: Address and length of the register set for the device. Only one
-  entry is expected, except for the "marvell,armadaxp-gpio" variant
-  for which two entries are expected: one for the general registers,
-  one for the per-cpu registers. Not used for marvell,armada-8k-gpio.
-
-- interrupts: The list of interrupts that are used for all the pins
-  managed by this GPIO bank. There can be more than one interrupt
-  (example: 1 interrupt per 8 pins on Armada XP, which means 4
-  interrupts per bank of 32 GPIOs).
-
-- interrupt-controller: identifies the node as an interrupt controller
-
-- #interrupt-cells: specifies the number of cells needed to encode an
-  interrupt source. Should be two.
-  The first cell is the GPIO number.
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-
-- gpio-controller: marks the device node as a gpio controller
-
-- ngpios: number of GPIOs this controller has
-
-- #gpio-cells: Should be two. The first cell is the pin number. The
-  second cell is reserved for flags, unused at the moment.
-
-Optional properties:
-
-In order to use the GPIO lines in PWM mode, some additional optional
-properties are required.
-
-- compatible: Must contain "marvell,armada-370-gpio"
-
-- reg: an additional register set is needed, for the GPIO Blink
-  Counter on/off registers.
-
-- reg-names: Must contain an entry "pwm" corresponding to the
-  additional register range needed for PWM operation.
-
-- #pwm-cells: Should be two. The first cell is the GPIO line number. The
-  second cell is the period in nanoseconds.
-
-- clocks: Must be a phandle to the clock for the GPIO controller.
-
-Example:
-
-		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
-		};
-
-		gpio1: gpio@18140 {
-			compatible = "marvell,armada-370-gpio";
-			reg = <0x18140 0x40>, <0x181c8 0x08>;
-			reg-names = "gpio", "pwm";
-			ngpios = <17>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			#pwm-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <87>, <88>, <89>;
-			clocks = <&coreclk 0>;
-		};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
new file mode 100644
index 000000000000..f1bd1e6b2e1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell EBU GPIO controller
+
+maintainers:
+  - Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+  - Andrew Lunn <andrew@lunn.ch>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,armada-8k-gpio
+          - marvell,orion-gpio
+
+      - items:
+          - enum:
+              - marvell,mv78200-gpio
+              - marvell,armada-370-gpio
+          - const: marvell,orion-gpio
+
+      - description: Deprecated binding
+        items:
+          - const: marvell,armadaxp-gpio
+          - const: marvell,orion-gpio
+        deprecated: true
+
+  reg:
+    description: |
+      Address and length of the register set for the device. Not used for
+      marvell,armada-8k-gpio.
+
+      A second entry can be provided, for the PWM function using the GPIO Blink
+      Counter on/off registers.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: pwm
+    minItems: 1
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the gpio registers (in bytes)
+
+  interrupts:
+    description: |
+      The list of interrupts that are used for all the pins managed by this
+      GPIO bank. There can be more than one interrupt (example: 1 interrupt
+      per 8 pins on Armada XP, which means 4 interrupts per bank of 32
+      GPIOs).
+    minItems: 1
+    maxItems: 4
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-controller: true
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  "#gpio-cells":
+    const: 2
+
+  marvell,pwm-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the pwm registers (in bytes)
+
+  "#pwm-cells":
+    description:
+      The first cell is the GPIO line number. The second cell is the period
+      in nanoseconds.
+    const: 2
+
+  clocks:
+    description:
+      Clock(s) used for PWM function.
+    items:
+      - description: Core clock
+      - description: AXI bus clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: core
+      - const: axi
+    minItems: 1
+
+required:
+  - compatible
+  - gpio-controller
+  - ngpios
+  - "#gpio-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-8k-gpio
+    then:
+      required:
+        - offset
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: true
+
+examples:
+  - |
+    gpio@d0018100 {
+      compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
+      reg = <0xd0018100 0x40>, <0xd0018800 0x30>;
+      ngpios = <32>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <16>, <17>, <18>, <19>;
+    };
+
+  - |
+    gpio@18140 {
+      compatible = "marvell,armada-370-gpio", "marvell,orion-gpio";
+      reg = <0x18140 0x40>, <0x181c8 0x08>;
+      reg-names = "gpio", "pwm";
+      ngpios = <17>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      #pwm-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <87>, <88>, <89>;
+      clocks = <&coreclk 0>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt
deleted file mode 100644
index 1e677a47b836..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-* Freescale MXS GPIO controller
-
-The Freescale MXS GPIO controller is part of MXS PIN controller.  The
-GPIOs are organized in port/bank.  Each port consists of 32 GPIOs.
-
-As the GPIO controller is embedded in the PIN controller and all the
-GPIO ports share the same IO space with PIN controller, the GPIO node
-will be represented as sub-nodes of MXS pinctrl node.
-
-Required properties for GPIO node:
-- compatible : Should be "fsl,<soc>-gpio".  The supported SoCs include
-  imx23 and imx28.
-- interrupts : Should be the port interrupt shared by all 32 pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
-  The second cell bits[3:0] is used to specify trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-
-Note: Each GPIO port should have an alias correctly numbered in "aliases"
-node.
-
-Examples:
-
-aliases {
-	gpio0 = &gpio0;
-	gpio1 = &gpio1;
-	gpio2 = &gpio2;
-	gpio3 = &gpio3;
-	gpio4 = &gpio4;
-};
-
-pinctrl@80018000 {
-	compatible = "fsl,imx28-pinctrl", "simple-bus";
-	reg = <0x80018000 2000>;
-
-	gpio0: gpio@0 {
-		compatible = "fsl,imx28-gpio";
-		interrupts = <127>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio1: gpio@1 {
-		compatible = "fsl,imx28-gpio";
-		interrupts = <126>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio2: gpio@2 {
-		compatible = "fsl,imx28-gpio";
-		interrupts = <125>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio3: gpio@3 {
-		compatible = "fsl,imx28-gpio";
-		interrupts = <124>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio4: gpio@4 {
-		compatible = "fsl,imx28-gpio";
-		interrupts = <123>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
new file mode 100644
index 000000000000..dfa1133f8c5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS GPIO controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  The Freescale MXS GPIO controller is part of MXS PIN controller.
+  The GPIOs are organized in port/bank, each port consists of 32 GPIOs.
+  As the GPIO controller is embedded in the PIN controller and all the
+  GPIO ports share the same IO space with PIN controller, the GPIO node
+  will be represented as sub-nodes of MXS pinctrl node.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-pinctrl
+      - fsl,imx28-pinctrl
+
+  '#address-cells':
+    const: 1
+  '#size-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "gpio@[0-9]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - fsl,imx23-gpio
+          - fsl,imx28-gpio
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        description: Should be the port interrupt shared by all 32 pins.
+        maxItems: 1
+
+      interrupt-controller: true
+
+      "#interrupt-cells":
+        const: 2
+
+      "#gpio-cells":
+        const: 2
+
+      gpio-controller: true
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - interrupt-controller
+      - "#interrupt-cells"
+      - "#gpio-cells"
+      - gpio-controller
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@80018000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx28-pinctrl";
+        reg = <0x80018000 0x2000>;
+
+        gpio@0 {
+                compatible = "fsl,imx28-gpio";
+                reg = <0>;
+                interrupts = <127>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+        };
+
+        gpio@1 {
+                compatible = "fsl,imx28-gpio";
+                reg = <1>;
+                interrupts = <126>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+        };
+
+        gpio@2 {
+                compatible = "fsl,imx28-gpio";
+                reg = <2>;
+                interrupts = <125>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+        };
+
+        gpio@3 {
+                compatible = "fsl,imx28-gpio";
+                reg = <3>;
+                interrupts = <124>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+        };
+
+        gpio@4 {
+                compatible = "fsl,imx28-gpio";
+                reg = <4>;
+                interrupts = <123>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt
deleted file mode 100644
index e57b2cb28f6c..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-omap.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-OMAP GPIO controller bindings
-
-Required properties:
-- compatible:
-  - "ti,omap2-gpio" for OMAP2 controllers
-  - "ti,omap3-gpio" for OMAP3 controllers
-  - "ti,omap4-gpio" for OMAP4 controllers
-- reg : Physical base address of the controller and length of memory mapped
-  region.
-- gpio-controller : Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two.
-  - first cell is the pin number
-  - second cell is used to specify optional parameters (unused)
-- interrupt-controller: Mark the device node as an interrupt controller.
-- #interrupt-cells : Should be 2.
-  The first cell is the GPIO number.
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-- interrupts : The interrupt the controller is rising as output when an
-  interrupt occures
-
-OMAP specific properties:
-- ti,hwmods:		Name of the hwmod associated to the GPIO:
-			"gpio<X>", <X> being the 1-based instance number
-			from the HW spec.
-- ti,gpio-always-on: 	Indicates if a GPIO bank is always powered and
-			so will never lose its logic state.
-
-
-Example:
-
-gpio0: gpio@44e07000 {
-    compatible = "ti,omap4-gpio";
-    reg = <0x44e07000 0x1000>;
-    ti,hwmods = "gpio1";
-    gpio-controller;
-    #gpio-cells = <2>;
-    interrupt-controller;
-    #interrupt-cells = <2>;
-    interrupts = <96>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
deleted file mode 100644
index dab537c20def..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-* NXP PCA953x I2C GPIO multiplexer
-
-Required properties:
- - compatible: Has to contain one of the following:
-	nxp,pca6416
-	nxp,pca9505
-	nxp,pca9534
-	nxp,pca9535
-	nxp,pca9536
-	nxp,pca9537
-	nxp,pca9538
-	nxp,pca9539
-	nxp,pca9554
-	nxp,pca9555
-	nxp,pca9556
-	nxp,pca9557
-	nxp,pca9574
-	nxp,pca9575
-	nxp,pca9698
-	nxp,pcal6416
-	nxp,pcal6524
-	nxp,pcal9555a
-	maxim,max7310
-	maxim,max7312
-	maxim,max7313
-	maxim,max7315
-	ti,pca6107
-	ti,pca9536
-	ti,tca6408
-	ti,tca6416
-	ti,tca6424
-	ti,tca9539
-	ti,tca9554
-	onnn,cat9554
-	onnn,pca9654
-	exar,xra1202
- - gpio-controller: if used as gpio expander.
- - #gpio-cells: if used as gpio expander.
- - interrupt-controller: if to be used as interrupt expander.
- - #interrupt-cells: if to be used as interrupt expander.
-
-Optional properties:
- - interrupts: interrupt specifier for the device's interrupt output.
- - reset-gpios: GPIO specification for the RESET input. This is an
-		active low signal to the PCA953x.
- - vcc-supply:	power supply regulator.
-
-Example:
-
-
-	gpio@20 {
-		compatible = "nxp,pca9505";
-		reg = <0x20>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pca9505>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-
-Example with Interrupts:
-
-
-	gpio99: gpio@22 {
-		compatible = "nxp,pcal6524";
-		reg = <0x22>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;	/* gpio6_161 */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		vcc-supply = <&vdds_1v8_main>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names =
-			"hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03", "vibra", "fault2", "p06", "p07",
-			"en-usb", "en-host1", "en-host2", "chg-int", "p14", "p15", "mic-int", "en-modem",
-			"shdn-hs-amp", "chg-status+red", "green", "blue", "en-esata", "fault1", "p26", "p27";
-	};
-
-	ts3a227@3b {
-		compatible = "ti,ts3a227e";
-		reg = <0x3b>;
-		interrupt-parent = <&gpio99>;
-		interrupts = <14 IRQ_TYPE_EDGE_RISING>;
-		ti,micbias = <0>;	/* 2.1V */
-	};
-
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
new file mode 100644
index 000000000000..1acaa0a3d35a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-pca9570.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCA9570 I2C GPO expander
+
+maintainers:
+  - Sungbo Eo <mans0n@gorani.run>
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca9570
+      - nxp,pca9571
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@24 {
+            compatible = "nxp,pca9570";
+            reg = <0x24>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
new file mode 100644
index 000000000000..1b70e9f308f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
@@ -0,0 +1,235 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA95xx I2C GPIO multiplexer
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  Bindings for the family of I2C GPIO multiplexers/expanders: NXP PCA95xx,
+  Maxim MAX73xx
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: diodes,pi4ioe5v6534q
+          - const: nxp,pcal6534
+      - items:
+          - enum:
+              - exar,xra1202
+              - maxim,max7310
+              - maxim,max7312
+              - maxim,max7313
+              - maxim,max7315
+              - maxim,max7319
+              - maxim,max7320
+              - maxim,max7321
+              - maxim,max7322
+              - maxim,max7323
+              - maxim,max7324
+              - maxim,max7325
+              - maxim,max7326
+              - maxim,max7327
+              - nxp,pca6408
+              - nxp,pca6416
+              - nxp,pca9505
+              - nxp,pca9506
+              - nxp,pca9534
+              - nxp,pca9535
+              - nxp,pca9536
+              - nxp,pca9537
+              - nxp,pca9538
+              - nxp,pca9539
+              - nxp,pca9554
+              - nxp,pca9555
+              - nxp,pca9556
+              - nxp,pca9557
+              - nxp,pca9574
+              - nxp,pca9575
+              - nxp,pca9698
+              - nxp,pcal6408
+              - nxp,pcal6416
+              - nxp,pcal6524
+              - nxp,pcal6534
+              - nxp,pcal9535
+              - nxp,pcal9554b
+              - nxp,pcal9555a
+              - onnn,cat9554
+              - onnn,pca9654
+              - ti,pca6107
+              - ti,pca9536
+              - ti,tca6408
+              - ti,tca6416
+              - ti,tca6424
+              - ti,tca9539
+              - ti,tca9554
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 40
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO specification for the RESET input. This is an active low signal to
+      the PCA953x.  Not valid for Maxim MAX732x devices.
+
+  vcc-supply:
+    description:
+      Optional power supply.  Not valid for Maxim MAX732x devices.
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    type: object
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max7320
+              - maxim,max7321
+              - maxim,max7322
+              - maxim,max7323
+              - maxim,max7324
+              - maxim,max7325
+              - maxim,max7326
+              - maxim,max7327
+    then:
+      properties:
+        reset-gpios: false
+        vcc-supply: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@20 {
+            compatible = "nxp,pca9505";
+            reg = <0x20>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_pca9505>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+            usb3-sata-sel-hog {
+                gpio-hog;
+                gpios = <4 GPIO_ACTIVE_HIGH>;
+                output-low;
+                line-name = "usb3_sata_sel";
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio99: gpio@22 {
+            compatible = "nxp,pcal6524";
+            reg = <0x22>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* gpio6_161 */
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            vcc-supply = <&vdds_1v8_main>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-line-names = "hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03",
+                              "vibra", "fault2", "p06", "p07", "en-usb",
+                              "en-host1", "en-host2", "chg-int", "p14", "p15",
+                              "mic-int", "en-modem", "shdn-hs-amp",
+                              "chg-status+red", "green", "blue", "en-esata",
+                              "fault1", "p26", "p27";
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c2 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* MAX7325 with interrupt support enabled */
+        gpio@6d {
+            compatible = "maxim,max7325";
+            reg = <0x6d>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+
+  - |
+    i2c3 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* MAX7325 with interrupt support disabled */
+        gpio@6e {
+            compatible = "maxim,max7325";
+            reg = <0x6e>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
deleted file mode 100644
index a482455a205b..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-* PCF857x-compatible I/O expanders
-
-The PCF857x-compatible chips have "quasi-bidirectional" I/O lines that can be
-driven high by a pull-up current source or driven low to ground. This combines
-the direction and output level into a single bit per line, which can't be read
-back. We can't actually know at initialization time whether a line is configured
-(a) as output and driving the signal low/high, or (b) as input and reporting a
-low/high value, without knowing the last value written since the chip came out
-of reset (if any). The only reliable solution for setting up line direction is
-thus to do it explicitly.
-
-Required Properties:
-
-  - compatible: should be one of the following.
-    - "maxim,max7328": For the Maxim MAX7378
-    - "maxim,max7329": For the Maxim MAX7329
-    - "nxp,pca8574": For the NXP PCA8574
-    - "nxp,pca8575": For the NXP PCA8575
-    - "nxp,pca9670": For the NXP PCA9670
-    - "nxp,pca9671": For the NXP PCA9671
-    - "nxp,pca9672": For the NXP PCA9672
-    - "nxp,pca9673": For the NXP PCA9673
-    - "nxp,pca9674": For the NXP PCA9674
-    - "nxp,pca9675": For the NXP PCA9675
-    - "nxp,pcf8574": For the NXP PCF8574
-    - "nxp,pcf8574a": For the NXP PCF8574A
-    - "nxp,pcf8575": For the NXP PCF8575
-
-  - reg: I2C slave address.
-
-  - gpio-controller: Marks the device node as a gpio controller.
-  - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
-    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
-    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
-
-Optional Properties:
-
-  - lines-initial-states: Bitmask that specifies the initial state of each
-  line. When a bit is set to zero, the corresponding line will be initialized to
-  the input (pulled-up) state. When the  bit is set to one, the line will be
-  initialized the low-level output state. If the property is not specified
-  all lines will be initialized to the input state.
-
-  The I/O expander can detect input state changes, and thus optionally act as
-  an interrupt controller. When the expander interrupt line is connected all the
-  following properties must be set. For more information please see the
-  interrupt controller device tree bindings documentation available at
-  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
-
-  - interrupt-controller: Identifies the node as an interrupt controller.
-  - #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
-  - interrupts: Interrupt specifier for the controllers interrupt.
-
-
-Please refer to gpio.txt in this directory for details of the common GPIO
-bindings used by client devices.
-
-Example: PCF8575 I/O expander node
-
-	pcf8575: gpio@20 {
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		interrupt-parent = <&irqpin2>;
-		interrupts = <3 0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
index 414a01cdf715..fba3c61f6a5b 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
@@ -14,7 +14,7 @@ Optional properties:
  - ngpios		: Number of used GPIO lines (0..n-1), default is 8.
  - load-gpios		: GPIO pin specifier attached to load enable, this
 			  pin is pulsed before reading from the device to
-			  load input pin values into the the device.
+			  load input pin values into the device.
 
 For other required and optional properties of SPI slave
 nodes please refer to ../spi/spi-bus.txt.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
deleted file mode 100644
index 5375625e8cd2..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Samsung Exynos4 GPIO Controller
-
-Required properties:
-- compatible: Compatible property value should be "samsung,exynos4-gpio>".
-
-- reg: Physical base address of the controller and length of memory mapped
-  region.
-
-- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes
-  should be the following with values derived from the SoC user manual.
-     <[phandle of the gpio controller node]
-      [pin number within the gpio controller]
-      [mux function]
-      [flags and pull up/down]
-      [drive strength]>
-
-  Values for gpio specifier:
-  - Pin number: is a value between 0 to 7.
-  - Flags and Pull Up/Down: 0 - Pull Up/Down Disabled.
-                            1 - Pull Down Enabled.
-                            3 - Pull Up Enabled.
-          Bit 16 (0x00010000) - Input is active low.
-  - Drive Strength: 0 - 1x,
-                    1 - 3x,
-                    2 - 2x,
-                    3 - 4x
-
-- gpio-controller: Specifies that the node is a gpio controller.
-- #address-cells: should be 1.
-- #size-cells: should be 1.
-
-Example:
-
-	gpa0: gpio-controller@11400000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "samsung,exynos4-gpio";
-		reg = <0x11400000 0x20>;
-		#gpio-cells = <4>;
-		gpio-controller;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt b/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt
deleted file mode 100644
index fd665b44d767..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-ST-Ericsson COH 901 571/3 GPIO controller
-
-Required properties:
-- compatible: Compatible property value should be "stericsson,gpio-coh901"
-- reg: Physical base address of the controller and length of memory mapped
-  region.
-- interrupts: the 0...n interrupts assigned to the different GPIO ports/banks.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
index a0e4cf885213..b33f8f02c0d7 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
@@ -8,8 +8,7 @@ Optional properties:
  - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
    due to different usage (e.g. touch, keypad)
 
-Node name must be stmpe_gpio and should be child node of stmpe node to which it
-belongs.
+Node should be child node of stmpe node to which it belongs.
 
 Example:
 	stmpe_gpio {
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt
deleted file mode 100644
index 78458adbf4b7..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Lantiq SoC Serial To Parallel (STP) GPIO controller
-
-The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
-peripheral controller used to drive external shift register cascades. At most
-3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
-to drive the 2 LSBs of the cascade automatically.
-
-
-Required properties:
-- compatible : Should be "lantiq,gpio-stp-xway"
-- reg : Address and length of the register set for the device
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify optional parameters (currently
-  unused).
-- gpio-controller : Marks the device node as a gpio controller.
-
-Optional properties:
-- lantiq,shadow : The default value that we shall assume as already set on the
-  shift register cascade.
-- lantiq,groups : Set the 3 bit mask to select which of the 3 groups are enabled
-  in the shift register cascade.
-- lantiq,dsl : The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit
-  property can enable this feature.
-- lantiq,phy1 : The gphy1 core can control 3 bits of the gpio cascade.
-- lantiq,phy2 : The gphy2 core can control 3 bits of the gpio cascade.
-- lantiq,rising : use rising instead of falling edge for the shift register
-
-Example:
-
-gpio1: stp@e100bb0 {
-	compatible = "lantiq,gpio-stp-xway";
-	reg = <0xE100BB0 0x40>;
-	#gpio-cells = <2>;
-	gpio-controller;
-
-	lantiq,shadow = <0xffff>;
-	lantiq,groups = <0x7>;
-	lantiq,dsl = <0x3>;
-	lantiq,phy1 = <0x7>;
-	lantiq,phy2 = <0x7>;
-	/* lantiq,rising; */
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml
new file mode 100644
index 000000000000..d565c4b63dbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-stp-xway.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq SoC Serial To Parallel (STP) GPIO controller
+
+description: |
+  The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
+  peripheral controller used to drive external shift register cascades. At most
+  3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
+  and Ethernet PHYs to drive some bytes of the cascade automatically.
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: lantiq,gpio-stp-xway
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description:
+      The first cell is the pin number and the second cell is used to specify
+      consumer flags.
+    const: 2
+
+  lantiq,shadow:
+    description:
+      The default value that we shall assume as already set on the
+      shift register cascade.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x000000
+    maximum: 0xffffff
+
+  lantiq,groups:
+    description:
+      Set the 3 bit mask to select which of the 3 groups are enabled
+      in the shift register cascade.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x7
+
+  lantiq,dsl:
+    description:
+      The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit
+      property can enable this feature.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x3
+
+  lantiq,rising:
+    description:
+      Use rising instead of falling edge for the shift register.
+    type: boolean
+
+patternProperties:
+  "^lantiq,phy[1-4]$":
+    description:
+      The gphy core can control 3 bits of the gpio cascade. In the xRX200 family
+      phy[1-2] are available, in xRX330 phy[1-3] and in XRX330 phy[1-4].
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x7
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@e100bb0 {
+        compatible = "lantiq,gpio-stp-xway";
+        reg = <0xE100BB0 0x40>;
+        #gpio-cells = <2>;
+        gpio-controller;
+
+        pinctrl-0 = <&stp_pins>;
+        pinctrl-names = "default";
+
+        lantiq,shadow = <0xffffff>;
+        lantiq,groups = <0x7>;
+        lantiq,dsl = <0x3>;
+        lantiq,phy1 = <0x7>;
+        lantiq,phy2 = <0x7>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt
deleted file mode 100644
index 1afc2de7a537..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-TPIC2810 GPIO controller bindings
-
-Required properties:
- - compatible		: Should be "ti,tpic2810".
- - reg			: The I2C address of the device
- - gpio-controller	: Marks the device node as a GPIO controller.
- - #gpio-cells		: Should be two. For consumer use see gpio.txt.
-
-Example:
-
-	gpio@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml
new file mode 100644
index 000000000000..cb8a5c376e1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-tpic2810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPIC2810 GPIO controller bindings
+
+maintainers:
+  - Aswath Govindraju <a-govindraju@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,tpic2810
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gpio@60 {
+            compatible = "ti,tpic2810";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-line-names = "LED A", "LED B", "LED C";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
deleted file mode 100644
index f281f12dac18..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-UniPhier GPIO controller
-
-Required properties:
-- compatible: Should be "socionext,uniphier-gpio".
-- reg: Specifies offset and length of the register set for the device.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be 2.  The first cell is the pin number and the second
-  cell is used to specify optional parameters.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be 2.  The first cell defines the interrupt number.
-  The second cell bits[3:0] is used to specify trigger type as follows:
-    1 = low-to-high edge triggered
-    2 = high-to-low edge triggered
-    4 = active high level-sensitive
-    8 = active low level-sensitive
-  Valid combinations are 1, 2, 3, 4, 8.
-- ngpios: Specifies the number of GPIO lines.
-- gpio-ranges: Mapping to pin controller pins (as described in gpio.txt)
-- socionext,interrupt-ranges: Specifies an interrupt number mapping between
-  this GPIO controller and its interrupt parent, in the form of arbitrary
-  number of <child-interrupt-base parent-interrupt-base length> triplets.
-
-Optional properties:
-- gpio-ranges-group-names: Used for named gpio ranges (as described in gpio.txt)
-
-Example:
-	gpio: gpio@55000000 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000000 0x200>;
-		interrupt-parent = <&aidet>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&pinctrl 0 0 0>;
-		gpio-ranges-group-names = "gpio_range";
-		ngpios = <248>;
-		socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>;
-	};
-
-Consumer Example:
-
-	sdhci0_pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>;
-	};
-
-Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC document.
-Unfortunately, only the one's place is octal in the port numbering.  (That is,
-PORT 8, 9, 18, 19, 28, 29, ... are missing.)  UNIPHIER_GPIO_PORT() is a helper
-macro to calculate 29 * 8 + 4.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt
deleted file mode 100644
index ae254aadee35..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-* Freescale VF610 PORT/GPIO module
-
-The Freescale PORT/GPIO modules are two adjacent modules providing GPIO
-functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of
-each, and each PORT module has its own interrupt.
-
-Required properties for GPIO node:
-- compatible : Should be "fsl,<soc>-gpio", below is supported list:
-	       "fsl,vf610-gpio"
-	       "fsl,imx7ulp-gpio"
-- reg : The first reg tuple represents the PORT module, the second tuple
-  the GPIO module.
-- interrupts : Should be the port interrupt shared by all 32 pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
-  The second cell bits[3:0] is used to specify trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-
-Optional properties:
--clocks:	Must contain an entry for each entry in clock-names.
-		See common clock-bindings.txt for details.
--clock-names:	A list of clock names. For imx7ulp, it must contain
-		"gpio", "port".
-
-Note: Each GPIO port should have an alias correctly numbered in "aliases"
-node.
-
-Examples:
-
-aliases {
-	gpio0 = &gpio1;
-	gpio1 = &gpio2;
-};
-
-gpio1: gpio@40049000 {
-	compatible = "fsl,vf610-gpio";
-	reg = <0x40049000 0x1000 0x400ff000 0x40>;
-	interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	gpio-ranges = <&iomuxc 0 0 32>;
-};
-
-gpio2: gpio@4004a000 {
-	compatible = "fsl,vf610-gpio";
-	reg = <0x4004a000 0x1000 0x400ff040 0x40>;
-	interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	gpio-ranges = <&iomuxc 0 32 32>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
new file mode 100644
index 000000000000..d2c39dba56ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-vf610.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale VF610 PORT/GPIO module
+
+maintainers:
+  - Stefan Agner <stefan@agner.ch>
+
+description: |
+  The Freescale PORT/GPIO modules are two adjacent modules providing GPIO
+  functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of
+  each, and each PORT module has its own interrupt.
+
+  Note: Each GPIO port should have an alias correctly numbered in "aliases"
+  node.
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,vf610-gpio
+      - items:
+          - const: fsl,imx7ulp-gpio
+          - const: fsl,vf610-gpio
+      - items:
+          - enum:
+              - fsl,imx93-gpio
+              - fsl,imx8ulp-gpio
+          - const: fsl,imx7ulp-gpio
+
+  reg:
+    description: The first reg tuple represents the PORT module, the second tuple
+      represents the GPIO module.
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  clocks:
+    items:
+      - description: SoC GPIO clock
+      - description: SoC PORT clock
+
+  clock-names:
+    items:
+      - const: gpio
+      - const: port
+
+  gpio-ranges:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio1: gpio@40049000 {
+        compatible = "fsl,vf610-gpio";
+        reg = <0x40049000 0x1000>, <0x400ff000 0x40>;
+        interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&iomuxc 0 0 32>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml b/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml
new file mode 100644
index 000000000000..601d85754577
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-virtio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtio GPIO controller
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+allOf:
+  - $ref: /schemas/virtio/virtio-device.yaml#
+
+description:
+  Virtio GPIO controller, see /schemas/virtio/virtio-device.yaml for more
+  details.
+
+properties:
+  $nodename:
+    const: gpio
+
+  compatible:
+    const: virtio,device29
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    virtio@3000 {
+        compatible = "virtio,mmio";
+        reg = <0x3000 0x100>;
+        interrupts = <41>;
+
+        gpio {
+            compatible = "virtio,device29";
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt b/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
deleted file mode 100644
index 08eed2335db0..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Xilinx plb/axi GPIO controller
-
-Dual channel GPIO controller with configurable number of pins
-(from 1 to 32 per channel). Every pin can be configured as
-input/output/tristate. Both channels share the same global IRQ but
-local interrupts can be enabled on channel basis.
-
-Required properties:
-- compatible : Should be "xlnx,xps-gpio-1.00.a"
-- reg : Address and length of the register set for the device
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
-- gpio-controller : Marks the device node as a GPIO controller.
-
-Optional properties:
-- interrupts : Interrupt mapping for GPIO IRQ.
-- xlnx,all-inputs : if n-th bit is setup, GPIO-n is input
-- xlnx,dout-default : if n-th bit is 1, GPIO-n default value is 1
-- xlnx,gpio-width : gpio width
-- xlnx,tri-default : if n-th bit is 1, GPIO-n is in tristate mode
-- xlnx,is-dual : if 1, controller also uses the second channel
-- xlnx,all-inputs-2 : as above but for the second channel
-- xlnx,dout-default-2 : as above but the second channel
-- xlnx,gpio2-width : as above but for the second channel
-- xlnx,tri-default-2 : as above but for the second channel
-
-
-Example:
-gpio: gpio@40000000 {
-	#gpio-cells = <2>;
-	compatible = "xlnx,xps-gpio-1.00.a";
-	gpio-controller ;
-	interrupt-parent = <&microblaze_0_intc>;
-	interrupts = < 6 2 >;
-	reg = < 0x40000000 0x10000 >;
-	xlnx,all-inputs = <0x0>;
-	xlnx,all-inputs-2 = <0x0>;
-	xlnx,dout-default = <0x0>;
-	xlnx,dout-default-2 = <0x0>;
-	xlnx,gpio-width = <0x2>;
-	xlnx,gpio2-width = <0x2>;
-	xlnx,interrupt-present = <0x1>;
-	xlnx,is-dual = <0x1>;
-	xlnx,tri-default = <0xffffffff>;
-	xlnx,tri-default-2 = <0xffffffff>;
-} ;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
deleted file mode 100644
index 47fc64922fe0..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Netlogic XLP Family GPIO
-========================
-
-This GPIO driver is used for following Netlogic XLP SoCs:
-	XLP832, XLP316, XLP208, XLP980, XLP532
-This GPIO driver is also compatible with GPIO controller found on
-Broadcom Vulcan ARM64.
-
-Required properties:
--------------------
-
-- compatible: Should be one of the following:
-  - "netlogic,xlp832-gpio": For Netlogic XLP832
-  - "netlogic,xlp316-gpio": For Netlogic XLP316
-  - "netlogic,xlp208-gpio": For Netlogic XLP208
-  - "netlogic,xlp980-gpio": For Netlogic XLP980
-  - "netlogic,xlp532-gpio": For Netlogic XLP532
-  - "brcm,vulcan-gpio": For Broadcom Vulcan ARM64
-- reg: Physical base address and length of the controller's registers.
-- #gpio-cells: Should be two. The first cell is the pin number and the second
-  cell is used to specify optional parameters (currently unused).
-- gpio-controller: Marks the device node as a GPIO controller.
-- nr-gpios: Number of GPIO pins supported by the controller.
-- interrupt-cells: Should be two. The first cell is the GPIO Number. The
-  second cell is used to specify flags. The following subset of flags is
-  supported:
-  - trigger type:
-	1 = low to high edge triggered.
-	2 = high to low edge triggered.
-	4 = active high level-sensitive.
-	8 = active low level-sensitive.
-- interrupts: Interrupt number for this device.
-- interrupt-controller: Identifies the node as an interrupt controller.
-
-Example:
-
-	gpio: xlp_gpio@34000 {
-		compatible = "netlogic,xlp316-gpio";
-		reg = <0 0x34100 0x1000
-		       0 0x35100 0x1000>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		nr-gpios = <57>;
-
-		#interrupt-cells = <2>;
-		interrupt-parent = <&pic>;
-		interrupts = <39>;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
deleted file mode 100644
index 4fa4eb5507cd..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Xilinx Zynq GPIO controller Device Tree Bindings
--------------------------------------------
-
-Required properties:
-- #gpio-cells 		: Should be two
-			  - First cell is the GPIO line number
-			  - Second cell is used to specify optional
-			    parameters (unused)
-- compatible		: Should be "xlnx,zynq-gpio-1.0" or "xlnx,zynqmp-gpio-1.0"
-- clocks		: Clock specifier (see clock bindings for details)
-- gpio-controller	: Marks the device node as a GPIO controller.
-- interrupts		: Interrupt specifier (see interrupt bindings for
-			  details)
-- interrupt-controller	: Marks the device node as an interrupt controller.
-- #interrupt-cells 	: Should be 2.  The first cell is the GPIO number.
-			  The second cell bits[3:0] is used to specify trigger type and level flags:
-			      1 = low-to-high edge triggered.
-			      2 = high-to-low edge triggered.
-			      4 = active high level-sensitive.
-			      8 = active low level-sensitive.
-- reg			: Address and length of the register set for the device
-
-Example:
-	gpio@e000a000 {
-		#gpio-cells = <2>;
-		compatible = "xlnx,zynq-gpio-1.0";
-		clocks = <&clkc 42>;
-		gpio-controller;
-		interrupt-parent = <&intc>;
-		interrupts = <0 20 4>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		reg = <0xe000a000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
new file mode 100644
index 000000000000..572e1718f501
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-zynq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq GPIO controller
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynq-gpio-1.0
+      - xlnx,zynqmp-gpio-1.0
+      - xlnx,versal-gpio-1.0
+      - xlnx,pmc-gpio-1.0
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-line-names:
+    description: strings describing the names of each gpio line
+    minItems: 58
+    maxItems: 174
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,zynqmp-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 174
+          maxItems: 174
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,zynq-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 118
+          maxItems: 118
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,versal-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 58
+          maxItems: 58
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,pmc-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 116
+          maxItems: 116
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - interrupts
+  - gpio-controller
+  - interrupt-controller
+  - "#interrupt-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@e000a000 {
+      #gpio-cells = <2>;
+      compatible = "xlnx,zynq-gpio-1.0";
+      clocks = <&clkc 42>;
+      gpio-controller;
+      interrupt-parent = <&intc>;
+      interrupts = <0 20 4>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      reg = <0xe000a000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index a8895d339bfe..5663e71b751f 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -213,7 +213,7 @@ Example of two SOC GPIO banks defined as gpio-controller nodes:
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		line_b {
+		line_b-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			output-low;
diff --git a/Documentation/devicetree/bindings/gpio/idt,32434-gpio.yaml b/Documentation/devicetree/bindings/gpio/idt,32434-gpio.yaml
new file mode 100644
index 000000000000..d38de8144656
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/idt,32434-gpio.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/idt,32434-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT 79RC32434 GPIO controller
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+properties:
+  compatible:
+    const: idt,32434-gpio
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: pic
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@50004 {
+        compatible = "idt,32434-gpio";
+        reg = <0x50004 0x10>, <0x38030 0x0c>;
+        reg-names = "gpio", "pic";
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&cpuintc>;
+        interrupts = <6>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        ngpios = <14>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
new file mode 100644
index 000000000000..b032471831e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+  There are three flavors of the GPIO controller, one full featured
+  input/output with interrupt support (kontron,sl28cpld-gpio), one
+  output-only (kontron,sl28-gpo) and one input-only (kontron,sl28-gpi).
+
+  Each controller supports 8 GPIO lines.
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-gpio
+      - kontron,sl28cpld-gpi
+      - kontron,sl28cpld-gpo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
deleted file mode 100644
index ba455589f869..000000000000
--- a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Mediatek MT7621 SoC GPIO controller bindings
-
-The IP core used inside these SoCs has 3 banks of 32 GPIOs each.
-The registers of all the banks are interwoven inside one single IO range.
-We load one GPIO controller instance per bank. Also the GPIO controller can receive
-interrupts on any of the GPIOs, either edge or level. It then interrupts the CPU
-using GIC INT12.
-
-Required properties for the top level node:
-- #gpio-cells : Should be two. The first cell is the GPIO pin number and the
-   second cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
-   Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
-- #interrupt-cells : Specifies the number of cells needed to encode an
-   interrupt. Should be 2. The first cell defines the interrupt number,
-   the second encodes the triger flags encoded as described in
-   Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- compatible:
-  - "mediatek,mt7621-gpio" for Mediatek controllers
-- reg : Physical base address and length of the controller's registers
-- interrupt-parent : phandle of the parent interrupt controller.
-- interrupts : Interrupt specifier for the controllers interrupt.
-- interrupt-controller : Mark the device node as an interrupt controller.
-- gpio-controller : Marks the device node as a GPIO controller.
-
-Example:
-	gpio@600 {
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "mediatek,mt7621-gpio";
-		gpio-controller;
-		interrupt-controller;
-		reg = <0x600 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.yaml b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.yaml
new file mode 100644
index 000000000000..5bbb2a31266e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/mediatek,mt7621-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7621 SoC GPIO controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  The IP core used inside these SoCs has 3 banks of 32 GPIOs each.
+  The registers of all the banks are interwoven inside one single IO range.
+  We load one GPIO controller instance per bank. Also the GPIO controller can receive
+  interrupts on any of the GPIOs, either edge or level. It then interrupts the CPU
+  using GIC INT12.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: mediatek,mt7621-gpio
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+  gpio-ranges: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+  - gpio-ranges
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    gpio@600 {
+      compatible = "mediatek,mt7621-gpio";
+      reg = <0x600 0x100>;
+      #gpio-cells = <2>;
+      gpio-controller;
+      gpio-ranges = <&pinctrl 0 0 95>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
new file mode 100644
index 000000000000..d481e78958a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/microchip,mpfs-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS GPIO Controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - microchip,mpfs-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt mapping, one per GPIO. Maximum 32 GPIOs.
+    minItems: 1
+    maxItems: 32
+
+  interrupt-controller: true
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  "#interrupt-cells":
+    const: 1
+
+  ngpios:
+    description:
+      The number of GPIOs available.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  gpio-controller: true
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+  - "#gpio-cells"
+  - gpio-controller
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@20122000 {
+        compatible = "microchip,mpfs-gpio";
+        reg = <0x20122000 0x1000>;
+        clocks = <&clkcfg 25>;
+        interrupt-parent = <&plic>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
deleted file mode 100644
index 30fd2201b3d4..000000000000
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Marvell PXA GPIO controller
-
-Required properties:
-- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
-		"intel,pxa27x-gpio", "intel,pxa3xx-gpio",
-		"marvell,pxa93x-gpio", "marvell,mmp-gpio",
-		"marvell,mmp2-gpio" or marvell,pxa1928-gpio.
-- reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all gpio pins.
-  There're three gpio interrupts in arch-pxa, and they're gpio0,
-  gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
-  gpio_mux.
-- interrupt-names : Should be the names of irq resources. Each interrupt
-  uses its own interrupt name, so there should be as many interrupt names
-  as referenced interrupts.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify flags. See gpio.txt for possible
-  values.
-
-Example for a MMP platform:
-
-	gpio: gpio@d4019000 {
-		compatible = "marvell,mmp-gpio";
-		reg = <0xd4019000 0x1000>;
-		interrupts = <49>;
-		interrupt-names = "gpio_mux";
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-      };
-
-Example for a PXA3xx platform:
-
-	gpio: gpio@40e00000 {
-		compatible = "intel,pxa3xx-gpio";
-		reg = <0x40e00000 0x10000>;
-		interrupt-names = "gpio0", "gpio1", "gpio_mux";
-		interrupts = <8 9 10>;
-		gpio-controller;
-		#gpio-cells = <0x2>;
-		interrupt-controller;
-		#interrupt-cells = <0x2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
new file mode 100644
index 000000000000..9cf6137dd524
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/mrvl-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA GPIO controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+  - Rob Herring <robh+dt@kernel.org>
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - intel,pxa25x-gpio
+              - intel,pxa26x-gpio
+              - intel,pxa27x-gpio
+              - intel,pxa3xx-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+        interrupt-names:
+          items:
+            - const: gpio0
+            - const: gpio1
+            - const: gpio_mux
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,mmp-gpio
+              - marvell,mmp2-gpio
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: gpio_mux
+
+properties:
+  $nodename:
+    pattern: '^gpio@[0-9a-f]+$'
+
+  compatible:
+    enum:
+      - intel,pxa25x-gpio
+      - intel,pxa26x-gpio
+      - intel,pxa27x-gpio
+      - intel,pxa3xx-gpio
+      - marvell,mmp-gpio
+      - marvell,mmp2-gpio
+      - marvell,pxa93x-gpio
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges: true
+
+  interrupts: true
+
+  interrupt-names: true
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+patternProperties:
+  '^gpio@[0-9a-f]*$':
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupts
+  - interrupt-names
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/pxa-clock.h>
+    gpio@40e00000 {
+        compatible = "intel,pxa3xx-gpio";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x40e00000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupts = <8>, <9>, <10>;
+        interrupt-names = "gpio0", "gpio1", "gpio_mux";
+        clocks = <&clks CLK_GPIO>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+  - |
+    #include <dt-bindings/clock/marvell,pxa910.h>
+    gpio@d4019000 {
+        compatible = "marvell,mmp-gpio";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0xd4019000 0x1000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupts = <49>;
+        interrupt-names = "gpio_mux";
+        clocks = <&soc_clocks PXA910_CLK_GPIO>;
+        resets = <&soc_clocks PXA910_CLK_GPIO>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        ranges;
+
+        gpio@d4019000 {
+            reg = <0xd4019000 0x4>;
+        };
+
+        gpio@d4019004 {
+            reg = <0xd4019004 0x4>;
+        };
+
+        gpio@d4019008 {
+            reg = <0xd4019008 0x4>;
+        };
+
+        gpio@d4019100 {
+            reg = <0xd4019100 0x4>;
+        };
+     };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
new file mode 100644
index 000000000000..18fe90387b87
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/mstar,msc313-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/SigmaStar GPIO controller
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - mstar,msc313-gpio
+      - sstar,ssd20xd-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-ranges: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/msc313-gpio.h>
+
+    gpio: gpio@207800 {
+      compatible = "mstar,msc313-gpio";
+      #gpio-cells = <2>;
+      reg = <0x207800 0x200>;
+      gpio-controller;
+      gpio-ranges = <&pinctrl 0 36 22>,
+                    <&pinctrl 22 63 4>,
+                    <&pinctrl 26 68 6>;
+      #interrupt-cells = <2>;
+      interrupt-controller;
+      interrupt-parent = <&intc_fiq>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt
deleted file mode 100644
index adff16c71d21..000000000000
--- a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt
+++ /dev/null
@@ -1,165 +0,0 @@
-NVIDIA Tegra186 GPIO controllers
-
-Tegra186 contains two GPIO controllers; a main controller and an "AON"
-controller. This binding document applies to both controllers. The register
-layouts for the controllers share many similarities, but also some significant
-differences. Hence, this document describes closely related but different
-bindings and compatible values.
-
-The Tegra186 GPIO controller allows software to set the IO direction of, and
-read/write the value of, numerous GPIO signals. Routing of GPIO signals to
-package balls is under the control of a separate pin controller HW block. Two
-major sets of registers exist:
-
-a) Security registers, which allow configuration of allowed access to the GPIO
-register set. These registers exist in a single contiguous block of physical
-address space. The size of this block, and the security features available,
-varies between the different GPIO controllers.
-
-Access to this set of registers is not necessary in all circumstances. Code
-that wishes to configure access to the GPIO registers needs access to these
-registers to do so. Code which simply wishes to read or write GPIO data does not
-need access to these registers.
-
-b) GPIO registers, which allow manipulation of the GPIO signals. In some GPIO
-controllers, these registers are exposed via multiple "physical aliases" in
-address space, each of which access the same underlying state. See the hardware
-documentation for rationale. Any particular GPIO client is expected to access
-just one of these physical aliases.
-
-Tegra HW documentation describes a unified naming convention for all GPIOs
-implemented by the SoC. Each GPIO is assigned to a port, and a port may control
-a number of GPIOs. Thus, each GPIO is named according to an alphabetical port
-name and an integer GPIO name within the port. For example, GPIO_PA0, GPIO_PN6,
-or GPIO_PCC3.
-
-The number of ports implemented by each GPIO controller varies. The number of
-implemented GPIOs within each port varies. GPIO registers within a controller
-are grouped and laid out according to the port they affect.
-
-The mapping from port name to the GPIO controller that implements that port, and
-the mapping from port name to register offset within a controller, are both
-extremely non-linear. The header file <dt-bindings/gpio/tegra186-gpio.h>
-describes the port-level mapping. In that file, the naming convention for ports
-matches the HW documentation. The values chosen for the names are alphabetically
-sorted within a particular controller. Drivers need to map between the DT GPIO
-IDs and HW register offsets using a lookup table.
-
-Each GPIO controller can generate a number of interrupt signals. Each signal
-represents the aggregate status for all GPIOs within a set of ports. Thus, the
-number of interrupt signals generated by a controller varies as a rough function
-of the number of ports it implements. Note that the HW documentation refers to
-both the overall controller HW module and the sets-of-ports as "controllers".
-
-Each GPIO controller in fact generates multiple interrupts signals for each set
-of ports. Each GPIO may be configured to feed into a specific one of the
-interrupt signals generated by a set-of-ports. The intent is for each generated
-signal to be routed to a different CPU, thus allowing different CPUs to each
-handle subsets of the interrupts within a port. The status of each of these
-per-port-set signals is reported via a separate register. Thus, a driver needs
-to know which status register to observe. This binding currently defines no
-configuration mechanism for this. By default, drivers should use register
-GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could
-define a property to configure this.
-
-Required properties:
-- compatible
-    Array of strings.
-    One of:
-    - "nvidia,tegra186-gpio".
-    - "nvidia,tegra186-gpio-aon".
-    - "nvidia,tegra194-gpio".
-    - "nvidia,tegra194-gpio-aon".
-- reg-names
-    Array of strings.
-    Contains a list of names for the register spaces described by the reg
-    property. May contain the following entries, in any order:
-    - "gpio": Mandatory. GPIO control registers. This may cover either:
-        a) The single physical alias that this OS should use.
-        b) All physical aliases that exist in the controller. This is
-           appropriate when the OS is responsible for managing assignment of
-           the physical aliases.
-    - "security": Optional. Security configuration registers.
-    Users of this binding MUST look up entries in the reg property by name,
-    using this reg-names property to do so.
-- reg
-    Array of (physical base address, length) tuples.
-    Must contain one entry per entry in the reg-names property, in a matching
-    order.
-- interrupts
-    Array of interrupt specifiers.
-    The interrupt outputs from the HW block, one per set of ports, in the
-    order the HW manual describes them. The number of entries required varies
-    depending on compatible value:
-    - "nvidia,tegra186-gpio": 6 entries.
-    - "nvidia,tegra186-gpio-aon": 1 entry.
-    - "nvidia,tegra194-gpio": 6 entries.
-    - "nvidia,tegra194-gpio-aon": 1 entry.
-- gpio-controller
-    Boolean.
-    Marks the device node as a GPIO controller/provider.
-- #gpio-cells
-    Single-cell integer.
-    Must be <2>.
-    Indicates how many cells are used in a consumer's GPIO specifier.
-    In the specifier:
-    - The first cell is the pin number.
-        See <dt-bindings/gpio/tegra186-gpio.h>.
-    - The second cell contains flags:
-        - Bit 0 specifies polarity
-            - 0: Active-high (normal).
-            - 1: Active-low (inverted).
-- interrupt-controller
-    Boolean.
-    Marks the device node as an interrupt controller/provider.
-- #interrupt-cells
-    Single-cell integer.
-    Must be <2>.
-    Indicates how many cells are used in a consumer's interrupt specifier.
-    In the specifier:
-    - The first cell is the GPIO number.
-        See <dt-bindings/gpio/tegra186-gpio.h>.
-    - The second cell is contains flags:
-        - Bits [3:0] indicate trigger type and level:
-            - 1: Low-to-high edge triggered.
-            - 2: High-to-low edge triggered.
-            - 4: Active high level-sensitive.
-            - 8: Active low level-sensitive.
-            Valid combinations are 1, 2, 3, 4, 8.
-
-Example:
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-gpio@2200000 {
-	compatible = "nvidia,tegra186-gpio";
-	reg-names = "security", "gpio";
-	reg =
-		<0x0 0x2200000 0x0 0x10000>,
-		<0x0 0x2210000 0x0 0x10000>;
-	interrupts =
-		<0 47 IRQ_TYPE_LEVEL_HIGH>,
-		<0 50 IRQ_TYPE_LEVEL_HIGH>,
-		<0 53 IRQ_TYPE_LEVEL_HIGH>,
-		<0 56 IRQ_TYPE_LEVEL_HIGH>,
-		<0 59 IRQ_TYPE_LEVEL_HIGH>,
-		<0 180 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
-
-gpio@c2f0000 {
-	compatible = "nvidia,tegra186-gpio-aon";
-	reg-names = "security", "gpio";
-	reg =
-		<0x0 0xc2f0000 0x0 0x1000>,
-		<0x0 0xc2f1000 0x0 0x1000>;
-	interrupts =
-		<0 60 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
new file mode 100644
index 000000000000..4ef06b2ff1ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nvidia,tegra186-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPIO Controller (Tegra186 and later)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  Tegra186 contains two GPIO controllers; a main controller and an "AON"
+  controller. This binding document applies to both controllers. The register
+  layouts for the controllers share many similarities, but also some
+  significant differences. Hence, this document describes closely related but
+  different bindings and compatible values.
+
+  The Tegra186 GPIO controller allows software to set the IO direction of,
+  and read/write the value of, numerous GPIO signals. Routing of GPIO signals
+  to package balls is under the control of a separate pin controller hardware
+  block. Two major sets of registers exist:
+
+    a) Security registers, which allow configuration of allowed access to the
+       GPIO register set. These registers exist in a single contiguous block
+       of physical address space. The size of this block, and the security
+       features available, varies between the different GPIO controllers.
+
+       Access to this set of registers is not necessary in all circumstances.
+       Code that wishes to configure access to the GPIO registers needs access
+       to these registers to do so. Code which simply wishes to read or write
+       GPIO data does not need access to these registers.
+
+    b) GPIO registers, which allow manipulation of the GPIO signals. In some
+       GPIO controllers, these registers are exposed via multiple "physical
+       aliases" in address space, each of which access the same underlying
+       state. See the hardware documentation for rationale. Any particular
+       GPIO client is expected to access just one of these physical aliases.
+
+    Tegra HW documentation describes a unified naming convention for all GPIOs
+    implemented by the SoC. Each GPIO is assigned to a port, and a port may
+    control a number of GPIOs. Thus, each GPIO is named according to an
+    alphabetical port name and an integer GPIO name within the port. For
+    example, GPIO_PA0, GPIO_PN6, or GPIO_PCC3.
+
+    The number of ports implemented by each GPIO controller varies. The number
+    of implemented GPIOs within each port varies. GPIO registers within a
+    controller are grouped and laid out according to the port they affect.
+
+    The mapping from port name to the GPIO controller that implements that
+    port, and the mapping from port name to register offset within a
+    controller, are both extremely non-linear. The header file
+    <dt-bindings/gpio/tegra186-gpio.h> describes the port-level mapping. In
+    that file, the naming convention for ports matches the HW documentation.
+    The values chosen for the names are alphabetically sorted within a
+    particular controller. Drivers need to map between the DT GPIO IDs and HW
+    register offsets using a lookup table.
+
+    Each GPIO controller can generate a number of interrupt signals. Each
+    signal represents the aggregate status for all GPIOs within a set of
+    ports. Thus, the number of interrupt signals generated by a controller
+    varies as a rough function of the number of ports it implements. Note
+    that the HW documentation refers to both the overall controller HW
+    module and the sets-of-ports as "controllers".
+
+    Each GPIO controller in fact generates multiple interrupts signals for
+    each set of ports. Each GPIO may be configured to feed into a specific
+    one of the interrupt signals generated by a set-of-ports. The intent is
+    for each generated signal to be routed to a different CPU, thus allowing
+    different CPUs to each handle subsets of the interrupts within a port.
+    The status of each of these per-port-set signals is reported via a
+    separate register. Thus, a driver needs to know which status register to
+    observe. This binding currently defines no configuration mechanism for
+    this. By default, drivers should use register
+    GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could
+    define a property to configure this.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-gpio
+      - nvidia,tegra186-gpio-aon
+      - nvidia,tegra194-gpio
+      - nvidia,tegra194-gpio-aon
+      - nvidia,tegra234-gpio
+      - nvidia,tegra234-gpio-aon
+
+  reg-names:
+    items:
+      - const: security
+      - const: gpio
+    minItems: 1
+
+  reg:
+    items:
+      - description: Security configuration registers.
+      - description: |
+          GPIO control registers. This may cover either:
+
+            a) The single physical alias that this OS should use.
+            b) All physical aliases that exist in the controller. This is
+               appropriate when the OS is responsible for managing assignment
+               of the physical aliases.
+    minItems: 1
+
+  interrupts:
+    description: The interrupt outputs from the HW block, one per set of
+      ports, in the order the HW manual describes them. The number of entries
+      required varies depending on compatible value.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description: |
+      Indicates how many cells are used in a consumer's GPIO specifier. In the
+      specifier:
+
+        - The first cell is the pin number.
+          See <dt-bindings/gpio/tegra186-gpio.h>.
+        - The second cell contains flags:
+          - Bit 0 specifies polarity
+            - 0: Active-high (normal).
+            - 1: Active-low (inverted).
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: |
+      Indicates how many cells are used in a consumer's interrupt specifier.
+      In the specifier:
+
+        - The first cell is the GPIO number.
+          See <dt-bindings/gpio/tegra186-gpio.h>.
+        - The second cell is contains flags:
+          - Bits [3:0] indicate trigger type and level:
+            - 1: Low-to-high edge triggered.
+            - 2: High-to-low edge triggered.
+            - 4: Active high level-sensitive.
+            - 8: Active low level-sensitive.
+
+            Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-gpio
+              - nvidia,tegra194-gpio
+              - nvidia,tegra234-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 48
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-gpio-aon
+              - nvidia,tegra194-gpio-aon
+              - nvidia,tegra234-gpio-aon
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio@2200000 {
+        compatible = "nvidia,tegra186-gpio";
+        reg-names = "security", "gpio";
+        reg = <0x2200000 0x10000>,
+              <0x2210000 0x10000>;
+        interrupts = <0  47 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  50 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  53 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  56 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  59 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 180 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    gpio@c2f0000 {
+        compatible = "nvidia,tegra186-gpio-aon";
+        reg-names = "security", "gpio";
+        reg = <0xc2f0000 0x1000>,
+              <0xc2f1000 0x1000>;
+        interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt
deleted file mode 100644
index 023c9526e5f8..000000000000
--- a/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-NVIDIA Tegra GPIO controller
-
-Required properties:
-- compatible : "nvidia,tegra<chip>-gpio"
-- reg : Physical base address and length of the controller's registers.
-- interrupts : The interrupt outputs from the controller. For Tegra20,
-  there should be 7 interrupts specified, and for Tegra30, there should
-  be 8 interrupts specified.
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters:
-  - bit 0 specifies polarity (0 for normal, 1 for inverted)
-- gpio-controller : Marks the device node as a GPIO controller.
-- #interrupt-cells : Should be 2.
-  The first cell is the GPIO number.
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-      Valid combinations are 1, 2, 3, 4, 8.
-- interrupt-controller : Marks the device node as an interrupt controller.
-
-Example:
-
-gpio: gpio@6000d000 {
-	compatible = "nvidia,tegra20-gpio";
-	reg = < 0x6000d000 0x1000 >;
-	interrupts = < 0 32 0x04
-		       0 33 0x04
-		       0 34 0x04
-		       0 35 0x04
-		       0 55 0x04
-		       0 87 0x04
-		       0 89 0x04 >;
-	#gpio-cells = <2>;
-	gpio-controller;
-	#interrupt-cells = <2>;
-	interrupt-controller;
-};
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.yaml b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.yaml
new file mode 100644
index 000000000000..94b51749ee76
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nvidia,tegra20-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPIO Controller (Tegra20 - Tegra210)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-gpio
+          - nvidia,tegra30-gpio
+
+      - items:
+          - enum:
+              - nvidia,tegra114-gpio
+              - nvidia,tegra124-gpio
+              - nvidia,tegra210-gpio
+          - const: nvidia,tegra30-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: The interrupt outputs from the controller. For Tegra20,
+      there should be 7 interrupts specified, and for Tegra30, there should
+      be 8 interrupts specified.
+
+  "#gpio-cells":
+    description: The first cell is the pin number and the second cell is used
+      to specify the GPIO polarity (0 = active high, 1 = active low).
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  "#interrupt-cells":
+    description: |
+      Should be 2. The first cell is the GPIO number. The second cell is
+      used to specify flags:
+
+        bits[3:0] trigger type and level flags:
+          1 = low-to-high edge triggered.
+          2 = high-to-low edge triggered.
+          4 = active high level-sensitive.
+          8 = active low level-sensitive.
+
+      Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+  interrupt-controller: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra30-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+          maxItems: 8
+    else:
+      properties:
+        interrupts:
+          minItems: 7
+          maxItems: 7
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - gpio-controller
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties:
+  type: object
+  required:
+    - gpio-hog
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio: gpio@6000d000 {
+        compatible = "nvidia,tegra20-gpio";
+        reg = <0x6000d000 0x1000>;
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        #interrupt-cells = <2>;
+        interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
new file mode 100644
index 000000000000..f0ff66c4c74e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nxp,pcf8575.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCF857x-compatible I/O expanders
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  The PCF857x-compatible chips have "quasi-bidirectional" I/O lines that can be
+  driven high by a pull-up current source or driven low to ground. This
+  combines the direction and output level into a single bit per line, which
+  can't be read back. We can't actually know at initialization time whether a
+  line is configured (a) as output and driving the signal low/high, or (b) as
+  input and reporting a low/high value, without knowing the last value written
+  since the chip came out of reset (if any). The only reliable solution for
+  setting up line direction is thus to do it explicitly.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max7328
+      - maxim,max7329
+      - nxp,pca8574
+      - nxp,pca8575
+      - nxp,pca9670
+      - nxp,pca9671
+      - nxp,pca9672
+      - nxp,pca9673
+      - nxp,pca9674
+      - nxp,pca9675
+      - nxp,pcf8574
+      - nxp,pcf8574a
+      - nxp,pcf8575
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell is the GPIO number and the second cell specifies GPIO
+      flags, as defined in <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH
+      and GPIO_ACTIVE_LOW flags are supported.
+
+  lines-initial-states:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitmask that specifies the initial state of each line.
+      When a bit is set to zero, the corresponding line will be initialized to
+      the input (pulled-up) state.
+      When the  bit is set to one, the line will be initialized to the
+      low-level output state.
+      If the property is not specified all lines will be initialized to the
+      input state.
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  wakeup-source: true
+
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pcf8575: gpio@20 {
+                    compatible = "nxp,pcf8575";
+                    reg = <0x20>;
+                    interrupt-parent = <&irqpin2>;
+                    interrupts = <3 0>;
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    interrupt-controller;
+                    #interrupt-cells = <2>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
index 313b17229247..bd35cbf7fa09 100644
--- a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
@@ -51,7 +51,10 @@ properties:
 
   gpio-controller: true
 
+  gpio-line-names: true
+
   gpio-ranges:
+    minItems: 1
     maxItems: 8
 
 required:
diff --git a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
new file mode 100644
index 000000000000..39fd959c45d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/realtek,otto-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek Otto GPIO controller
+
+maintainers:
+  - Sander Vanheule <sander@svanheule.net>
+  - Bert Vermeulen <bert@biot.com>
+
+description: |
+  Realtek's GPIO controller on their MIPS switch SoCs (Otto platform) consists
+  of two banks of 32 GPIOs. These GPIOs can generate edge-triggered interrupts.
+  Each bank's interrupts are cascased into one interrupt line on the parent
+  interrupt controller, if provided.
+  This binding allows defining a single bank in the devicetree. The interrupt
+  controller is not supported on the fallback compatible name, which only
+  allows for GPIO port use.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - realtek,rtl8380-gpio
+          - realtek,rtl8390-gpio
+          - realtek,rtl9300-gpio
+          - realtek,rtl9310-gpio
+      - const: realtek,otto-gpio
+
+  reg: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: realtek,rtl9300-gpio
+then:
+  properties:
+    reg:
+      items:
+        - description: GPIO and interrupt control
+        - description: interrupt CPU map
+else:
+  properties:
+    reg:
+      items:
+        - description: GPIO and interrupt control
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+dependencies:
+  interrupt-controller: [ interrupts ]
+
+examples:
+  - |
+      gpio@3500 {
+        compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
+        reg = <0x3500 0x1c>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        ngpios = <24>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&rtlintc>;
+        interrupts = <23>;
+      };
+  - |
+      gpio@3300 {
+        compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio";
+        reg = <0x3300 0x1c>, <0x3338 0x8>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        ngpios = <24>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&rtlintc>;
+        interrupts = <13>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml b/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml
new file mode 100644
index 000000000000..8bdef812c87c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/renesas,em-gio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas EMMA Mobile General Purpose I/O Interface
+
+maintainers:
+  - Magnus Damm <magnus.damm@gmail.com>
+
+properties:
+  compatible:
+    const: renesas,em-gio
+
+  reg:
+    items:
+      - description: First set of contiguous registers
+      - description: Second set of contiguous registers
+
+  interrupts:
+    items:
+      - description: Interrupt for the first set of 16 GPIO ports
+      - description: Interrupt for the second set of 16 GPIO ports
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - ngpios
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    gpio0: gpio@e0050000 {
+            compatible = "renesas,em-gio";
+            reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pfc 0 0 32>;
+            ngpios = <32>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
deleted file mode 100644
index 10dce84b1545..000000000000
--- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-* Renesas R-Car GPIO Controller
-
-Required Properties:
-
-  - compatible: should contain one or more of the following:
-    - "renesas,gpio-r8a7743": for R8A7743 (RZ/G1M) compatible GPIO controller.
-    - "renesas,gpio-r8a7744": for R8A7744 (RZ/G1N) compatible GPIO controller.
-    - "renesas,gpio-r8a7745": for R8A7745 (RZ/G1E) compatible GPIO controller.
-    - "renesas,gpio-r8a77470": for R8A77470 (RZ/G1C) compatible GPIO controller.
-    - "renesas,gpio-r8a774a1": for R8A774A1 (RZ/G2M) compatible GPIO controller.
-    - "renesas,gpio-r8a774b1": for R8A774B1 (RZ/G2N) compatible GPIO controller.
-    - "renesas,gpio-r8a774c0": for R8A774C0 (RZ/G2E) compatible GPIO controller.
-    - "renesas,gpio-r8a7778": for R8A7778 (R-Car M1) compatible GPIO controller.
-    - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
-    - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller.
-    - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2-W) compatible GPIO controller.
-    - "renesas,gpio-r8a7792": for R8A7792 (R-Car V2H) compatible GPIO controller.
-    - "renesas,gpio-r8a7793": for R8A7793 (R-Car M2-N) compatible GPIO controller.
-    - "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller.
-    - "renesas,gpio-r8a7795": for R8A7795 (R-Car H3) compatible GPIO controller.
-    - "renesas,gpio-r8a7796": for R8A77960 (R-Car M3-W) compatible GPIO controller.
-    - "renesas,gpio-r8a77961": for R8A77961 (R-Car M3-W+) compatible GPIO controller.
-    - "renesas,gpio-r8a77965": for R8A77965 (R-Car M3-N) compatible GPIO controller.
-    - "renesas,gpio-r8a77970": for R8A77970 (R-Car V3M) compatible GPIO controller.
-    - "renesas,gpio-r8a77980": for R8A77980 (R-Car V3H) compatible GPIO controller.
-    - "renesas,gpio-r8a77990": for R8A77990 (R-Car E3) compatible GPIO controller.
-    - "renesas,gpio-r8a77995": for R8A77995 (R-Car D3) compatible GPIO controller.
-    - "renesas,rcar-gen1-gpio": for a generic R-Car Gen1 GPIO controller.
-    - "renesas,rcar-gen2-gpio": for a generic R-Car Gen2 or RZ/G1 GPIO controller.
-    - "renesas,rcar-gen3-gpio": for a generic R-Car Gen3 or RZ/G2 GPIO controller.
-    - "renesas,gpio-rcar": deprecated.
-
-    When compatible with the generic version nodes must list the
-    SoC-specific version corresponding to the platform first followed by
-    the generic version.
-
-  - reg: Base address and length of each memory resource used by the GPIO
-    controller hardware module.
-
-  - interrupts: Interrupt specifier for the controllers interrupt.
-
-  - gpio-controller: Marks the device node as a gpio controller.
-  - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
-    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
-    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
-  - gpio-ranges: See gpio.txt.
-
-Optional properties:
-
-  - clocks: Must contain a reference to the functional clock.  The property is
-    mandatory if the hardware implements a controllable functional clock for
-    the GPIO instance.
-
-  - gpio-reserved-ranges: See gpio.txt.
-
-Please refer to gpio.txt in this directory for the common GPIO bindings used by
-client devices.
-
-The GPIO controller also acts as an interrupt controller. It uses the default
-two cells specifier as described in Documentation/devicetree/bindings/
-interrupt-controller/interrupts.txt.
-
-Example: R8A77470 (RZ/G1C) GPIO controller nodes
-
-       gpio0: gpio@e6050000 {
-                compatible = "renesas,gpio-r8a77470",
-                             "renesas,rcar-gen2-gpio";
-                reg = <0 0xe6050000 0 0x50>;
-                interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-                #gpio-cells = <2>;
-                gpio-controller;
-                gpio-ranges = <&pfc 0 0 23>;
-                #interrupt-cells = <2>;
-                interrupt-controller;
-                clocks = <&cpg CPG_MOD 912>;
-                power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-                resets = <&cpg 912>;
-        };
-	...
-       gpio3: gpio@e6053000 {
-                compatible = "renesas,gpio-r8a77470",
-                             "renesas,rcar-gen2-gpio";
-                reg = <0 0xe6053000 0 0x50>;
-                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-                #gpio-cells = <2>;
-                gpio-controller;
-                gpio-ranges = <&pfc 0 96 30>;
-                gpio-reserved-ranges = <17 10>;
-                #interrupt-cells = <2>;
-                interrupt-controller;
-                clocks = <&cpg CPG_MOD 909>;
-                power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-                resets = <&cpg 909>;
-        };
diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
new file mode 100644
index 000000000000..aa424e2b95f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/renesas,rcar-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car General-Purpose Input/Output Ports (GPIO)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,gpio-r8a7778      # R-Car M1
+              - renesas,gpio-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-gpio # R-Car Gen1
+
+      - items:
+          - enum:
+              - renesas,gpio-r8a7742      # RZ/G1H
+              - renesas,gpio-r8a7743      # RZ/G1M
+              - renesas,gpio-r8a7744      # RZ/G1N
+              - renesas,gpio-r8a7745      # RZ/G1E
+              - renesas,gpio-r8a77470     # RZ/G1C
+              - renesas,gpio-r8a7790      # R-Car H2
+              - renesas,gpio-r8a7791      # R-Car M2-W
+              - renesas,gpio-r8a7792      # R-Car V2H
+              - renesas,gpio-r8a7793      # R-Car M2-N
+              - renesas,gpio-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1
+
+      - items:
+          - enum:
+              - renesas,gpio-r8a774a1     # RZ/G2M
+              - renesas,gpio-r8a774b1     # RZ/G2N
+              - renesas,gpio-r8a774c0     # RZ/G2E
+              - renesas,gpio-r8a774e1     # RZ/G2H
+              - renesas,gpio-r8a7795      # R-Car H3
+              - renesas,gpio-r8a7796      # R-Car M3-W
+              - renesas,gpio-r8a77961     # R-Car M3-W+
+              - renesas,gpio-r8a77965     # R-Car M3-N
+              - renesas,gpio-r8a77970     # R-Car V3M
+              - renesas,gpio-r8a77980     # R-Car V3H
+              - renesas,gpio-r8a77990     # R-Car E3
+              - renesas,gpio-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
+
+      - items:
+          - enum:
+              - renesas,gpio-r8a779a0     # R-Car V3U
+              - renesas,gpio-r8a779f0     # R-Car S4-8
+              - renesas,gpio-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-gpio # R-Car Gen4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 8
+
+patternProperties:
+  "^.*$":
+    if:
+      type: object
+    then:
+      properties:
+        gpio-hog: true
+        gpios: true
+        input: true
+        output-high: true
+        output-low: true
+        line-name: true
+
+      required:
+        - gpio-hog
+        - gpios
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupt-controller
+  - '#interrupt-cells'
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - renesas,rcar-gen1-gpio
+then:
+  required:
+    - clocks
+    - power-domains
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a77470-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a77470-sysc.h>
+    gpio3: gpio@e6053000 {
+            compatible = "renesas,gpio-r8a77470", "renesas,rcar-gen2-gpio";
+            reg = <0xe6053000 0x50>;
+            interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 909>;
+            power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+            resets = <&cpg 909>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pfc 0 96 30>;
+            gpio-reserved-ranges = <17 10>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+     };
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
new file mode 100644
index 000000000000..affd823c881d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/rockchip,gpio-bank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip GPIO bank
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,gpio-bank
+      - rockchip,rk3188-gpio-bank0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: APB interface clock source
+      - description: GPIO debounce reference clock source
+
+  gpio-ranges: true
+
+  gpio-controller: true
+
+  gpio-line-names: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl: pinctrl {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      gpio0: gpio@2000a000 {
+        compatible = "rockchip,rk3188-gpio-bank0";
+        reg = <0x2000a000 0x100>;
+        interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_gates8 9>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+      };
+
+      gpio1: gpio@2003c000 {
+        compatible = "rockchip,gpio-bank";
+        reg = <0x2003c000 0x100>;
+        interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_gates8 10>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt
deleted file mode 100644
index f9231df17c2b..000000000000
--- a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Rockchip RK3328 GRF (General Register Files) GPIO controller.
-
-In Rockchip RK3328, the output only GPIO_MUTE pin, originally for codec mute
-control, can also be used for general purpose. It is manipulated by the
-GRF_SOC_CON10 register in GRF. Aside from the GPIO_MUTE pin, the HDMI pins can
-also be set in the same way.
-
-Currently this GPIO controller only supports the mute pin. If needed in the
-future, the HDMI pins support can also be added.
-
-Required properties:
-- compatible: Should contain "rockchip,rk3328-grf-gpio".
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be 2. The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-    0 = Active high,
-    1 = Active low.
-
-Example:
-
-	grf: syscon@ff100000 {
-		compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
-
-		grf_gpio: grf-gpio {
-			compatible = "rockchip,rk3328-grf-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-
-Note: The grf_gpio node should be declared as the child of the GRF (General
-Register File) node. The GPIO_MUTE pin is referred to as <&grf_gpio 0>.
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
new file mode 100644
index 000000000000..d8cce73ea0ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3328 General Register Files GPIO controller
+
+description:
+  The Rockchip RK3328 General Register File (GRF) outputs only the
+  GPIO_MUTE pin, originally for codec mute control, but it can also be used
+  for general purpose. It is manipulated by the GRF_SOC_CON10 register.
+  If needed in the future support for the HDMI pins can also be added.
+  The GPIO node should be declared as the child of the GRF node.
+
+  The GPIO_MUTE pin is referred to in the format
+
+  <&grf_gpio 0 GPIO_ACTIVE_LOW>
+
+  The first cell is the pin number and
+  the second cell is used to specify the GPIO polarity
+    0 = Active high
+    1 = Active low
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3328-grf-gpio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    grf_gpio: gpio {
+      compatible = "rockchip,rk3328-grf-gpio";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
deleted file mode 100644
index d4d83916c09d..000000000000
--- a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Aspeed SGPIO controller Device Tree Bindings
---------------------------------------------
-
-This SGPIO controller is for ASPEED AST2500 SoC, it supports up to 80 full
-featured Serial GPIOs. Each of the Serial GPIO pins can be programmed to
-support the following options:
-- Support interrupt option for each input port and various interrupt
-  sensitivity option (level-high, level-low, edge-high, edge-low)
-- Support reset tolerance option for each output port
-- Directly connected to APB bus and its shift clock is from APB bus clock
-  divided by a programmable value.
-- Co-work with external signal-chained TTL components (74LV165/74LV595)
-
-Required properties:
-
-- compatible : Should be one of
-  "aspeed,ast2400-sgpio", "aspeed,ast2500-sgpio"
-- #gpio-cells : Should be 2, see gpio.txt
-- reg : Address and length of the register set for the device
-- gpio-controller : Marks the device node as a GPIO controller
-- interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt
-- interrupt-controller : Mark the GPIO controller as an interrupt-controller
-- ngpios : number of GPIO lines, see gpio.txt
-  (should be multiple of 8, up to 80 pins)
-- clocks : A phandle to the APB clock for SGPM clock division
-- bus-frequency : SGPM CLK frequency
-
-The sgpio and interrupt properties are further described in their respective
-bindings documentation:
-
-- Documentation/devicetree/bindings/gpio/gpio.txt
-- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-  Example:
-	sgpio: sgpio@1e780200 {
-		#gpio-cells = <2>;
-		compatible = "aspeed,ast2500-sgpio";
-		gpio-controller;
-		interrupts = <40>;
-		reg = <0x1e780200 0x0100>;
-		clocks = <&syscon ASPEED_CLK_APB>;
-		interrupt-controller;
-		ngpios = <8>;
-		bus-frequency = <12000000>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
index 418e8381e07c..fc095646adea 100644
--- a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
@@ -7,13 +7,15 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SiFive GPIO controller
 
 maintainers:
-  - Yash Shah <yash.shah@sifive.com>
   - Paul Walmsley <paul.walmsley@sifive.com>
 
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-gpio
+      - enum:
+          - sifive,fu540-c000-gpio
+          - sifive,fu740-c000-gpio
+          - canaan,k210-gpiohs
       - const: sifive,gpio0
 
   reg:
@@ -21,9 +23,9 @@ properties:
 
   interrupts:
     description:
-      interrupt mapping one per GPIO. Maximum 16 GPIOs.
+      Interrupt mapping, one per GPIO. Maximum 32 GPIOs.
     minItems: 1
-    maxItems: 16
+    maxItems: 32
 
   interrupt-controller: true
 
@@ -36,6 +38,18 @@ properties:
   "#gpio-cells":
     const: 2
 
+  ngpios:
+    description:
+      The number of GPIOs available on the controller implementation.
+      It is 16 for the SiFive SoCs and 32 for the Canaan K210.
+    minimum: 1
+    maximum: 32
+    default: 16
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
   gpio-controller: true
 
 required:
@@ -44,10 +58,20 @@ required:
   - interrupts
   - interrupt-controller
   - "#interrupt-cells"
-  - clocks
   - "#gpio-cells"
   - gpio-controller
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - sifive,fu540-c000-gpio
+          - sifive,fu740-c000-gpio
+then:
+  required:
+    - clocks
+
 additionalProperties: false
 
 examples:
@@ -56,9 +80,10 @@ examples:
       gpio@10060000 {
         compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
         interrupt-parent = <&plic>;
-        interrupts = <7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22>;
-        reg = <0x0 0x10060000 0x0 0x1000>;
-        clocks = <&tlclk PRCI_CLK_TLCLK>;
+        interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>,
+                     <17>, <18>, <19>, <20>, <21>, <22>;
+        reg = <0x10060000 0x1000>;
+        clocks = <&tlclk FU540_PRCI_CLK_TLCLK>;
         gpio-controller;
         #gpio-cells = <2>;
         interrupt-controller;
diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
new file mode 100644
index 000000000000..b391cc1b4590
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/snps,dw-apb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare APB GPIO controller
+
+description: |
+  Synopsys DesignWare GPIO controllers have a configurable number of ports,
+  each of which are intended to be represented as child nodes with the generic
+  GPIO-controller properties as desribed in this bindings file.
+
+maintainers:
+  - Hoan Tran <hoan@os.amperecomputing.com>
+  - Serge Semin <fancer.lancer@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: snps,dw-apb-gpio
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: APB interface clock source
+      - description: DW GPIO debounce reference clock source
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: bus
+      - const: db
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^gpio-(port|controller)@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: snps,dw-apb-gpio-port
+
+      reg:
+        maxItems: 1
+
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+      ngpios:
+        default: 32
+        minimum: 1
+        maximum: 32
+
+      snps,nr-gpios:
+        description: The number of GPIO pins exported by the port.
+        deprecated: true
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 32
+        minimum: 1
+        maximum: 32
+
+      interrupts:
+        description: |
+          The interrupts to the parent controller raised when GPIOs generate
+          the interrupts. If the controller provides one combined interrupt
+          for all GPIOs, specify a single interrupt. If the controller provides
+          one interrupt for each GPIO, provide a list of interrupts that
+          correspond to each of the GPIO pins.
+        minItems: 1
+        maxItems: 32
+
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 2
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - '#gpio-cells'
+
+    dependencies:
+      interrupt-controller: [ interrupts ]
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    gpio: gpio@20000 {
+      compatible = "snps,dw-apb-gpio";
+      reg = <0x20000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      porta: gpio-port@0 {
+        compatible = "snps,dw-apb-gpio-port";
+        reg = <0>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        snps,nr-gpios = <8>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&vic1>;
+        interrupts = <0>;
+      };
+
+      portb: gpio-port@1 {
+        compatible = "snps,dw-apb-gpio-port";
+        reg = <1>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        snps,nr-gpios = <8>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
deleted file mode 100644
index 839dd32ffe11..000000000000
--- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-* Synopsys DesignWare APB GPIO controller
-
-Required properties:
-- compatible : Should contain "snps,dw-apb-gpio"
-- reg : Address and length of the register set for the device.
-- #address-cells : should be 1 (for addressing port subnodes).
-- #size-cells : should be 0 (port subnodes).
-
-The GPIO controller has a configurable number of ports, each of which are
-represented as child nodes with the following properties:
-
-Required properties:
-- compatible : "snps,dw-apb-gpio-port"
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-- reg : The integer port index of the port, a single cell.
-
-Optional properties:
-- interrupt-controller : The first port may be configured to be an interrupt
-controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt.  Shall be set to 2.  The first cell defines the interrupt number,
-  the second encodes the triger flags encoded as described in
-  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- interrupts : The interrupts to the parent controller raised when GPIOs
-  generate the interrupts. If the controller provides one combined interrupt
-  for all GPIOs, specify a single interrupt. If the controller provides one
-  interrupt for each GPIO, provide a list of interrupts that correspond to each
-  of the GPIO pins. When specifying multiple interrupts, if any are unconnected,
-  use the interrupts-extended property to specify the interrupts and set the
-  interrupt controller handle for unused interrupts to 0.
-- snps,nr-gpios : The number of pins in the port, a single cell.
-- resets : Reset line for the controller.
-
-Example:
-
-gpio: gpio@20000 {
-	compatible = "snps,dw-apb-gpio";
-	reg = <0x20000 0x1000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	porta: gpio@0 {
-		compatible = "snps,dw-apb-gpio-port";
-		gpio-controller;
-		#gpio-cells = <2>;
-		snps,nr-gpios = <8>;
-		reg = <0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&vic1>;
-		interrupts = <0>;
-	};
-
-	portb: gpio@1 {
-		compatible = "snps,dw-apb-gpio-port";
-		gpio-controller;
-		#gpio-cells = <2>;
-		snps,nr-gpios = <8>;
-		reg = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
new file mode 100644
index 000000000000..228fa27ffdc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/socionext,uniphier-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier GPIO controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: socionext,uniphier-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: |
+      The first cell defines the interrupt number.
+      The second cell bits[3:0] is used to specify trigger type as follows:
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        4 = active high level-sensitive
+        8 = active low level-sensitive
+      Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+  ngpios:
+    minimum: 0
+    maximum: 512
+
+  gpio-ranges: true
+
+  gpio-ranges-group-names: true
+
+  socionext,interrupt-ranges:
+    description: |
+      Specifies an interrupt number mapping between this GPIO controller and
+      its interrupt parent, in the form of arbitrary number of
+      <child-interrupt-base parent-interrupt-base length> triplets.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - ngpios
+  - gpio-ranges
+  - socionext,interrupt-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/gpio/uniphier-gpio.h>
+
+    gpio: gpio@55000000 {
+        compatible = "socionext,uniphier-gpio";
+        reg = <0x55000000 0x200>;
+        interrupt-parent = <&aidet>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 0>;
+        gpio-ranges-group-names = "gpio_range";
+        ngpios = <248>;
+        socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>;
+    };
+
+    // Consumer:
+    // Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC
+    // document. Unfortunately, only the one's place is octal in the port
+    // numbering. (That is, PORT 8, 9, 18, 19, 28, 29, ... do not exist.)
+    // UNIPHIER_GPIO_PORT() is a helper macro to calculate 29 * 8 + 4.
+    sdhci0_pwrseq {
+        compatible = "mmc-pwrseq-emmc";
+        reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
new file mode 100644
index 000000000000..7087e4a5013f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/ti,omap-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP GPIO controller bindings
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description: |
+  The general-purpose interface combines general-purpose input/output (GPIO) banks.
+  Each GPIO banks provides up to 32 dedicated general-purpose pins with input
+  and output capabilities; interrupt generation in active mode and wake-up
+  request generation in idle mode upon the detection of external events.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,omap2-gpio
+          - ti,omap3-gpio
+          - ti,omap4-gpio
+      - items:
+          - const: ti,am4372-gpio
+          - const: ti,omap4-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  gpio-ranges: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+  ti,gpio-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if a GPIO bank is always powered and will never lose its logic state.
+
+  ti,hwmods:
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+    description:
+      Name of the hwmod associated with the GPIO. Needed on some legacy OMAP
+      SoCs which have not been converted to the ti,sysc interconnect hierarachy.
+
+  ti,no-reset-on-init:
+    $ref: /schemas/types.yaml#/definitions/flag
+    deprecated: true
+    description:
+      Do not reset on init. Used with ti,hwmods on some legacy OMAP SoCs which
+      have not been converted to the ti,sysc interconnect hierarachy.
+
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpio0: gpio@0 {
+        compatible = "ti,omap4-gpio";
+        reg = <0x0 0x1000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <96>;
+        ti,gpio-always-on;
+
+        ls-buf-en-hog {
+            gpio-hog;
+            gpios = <10 GPIO_ACTIVE_HIGH>;
+            output-high;
+            line-name = "LS_BUF_EN";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
new file mode 100644
index 000000000000..b085450b527f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/toshiba,gpio-visconti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti ARM SoCs GPIO controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,gpio-tmpv7708
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-ranges: true
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    description:
+      interrupt mapping one per GPIO.
+    minItems: 16
+    maxItems: 16
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-ranges
+  - gpio-controller
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interrupt-controller/irq.h>
+      #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+      soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gpio: gpio@28020000 {
+          compatible = "toshiba,gpio-tmpv7708";
+          reg = <0 0x28020000 0 0x1000>;
+          #gpio-cells = <0x2>;
+          gpio-ranges = <&pmux 0 0 32>;
+          gpio-controller;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+          interrupt-parent = <&gic>;
+        };
+      };
+...
diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
new file mode 100644
index 000000000000..7f26f6b1eea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: X-Powers AXP209 GPIO
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+
+properties:
+  "#gpio-cells":
+    const: 2
+    description: >
+      The first cell is the pin number and the second is the GPIO flags.
+
+  compatible:
+    oneOf:
+      - enum:
+          - x-powers,axp209-gpio
+          - x-powers,axp221-gpio
+          - x-powers,axp813-gpio
+      - items:
+          - enum:
+              - x-powers,axp223-gpio
+              - x-powers,axp809-gpio
+          - const: x-powers,axp221-gpio
+      - items:
+          - const: x-powers,axp803-gpio
+          - const: x-powers,axp813-gpio
+
+  gpio-controller: true
+
+patternProperties:
+  "^.*-pins?$":
+    $ref: /schemas/pinctrl/pinmux-node.yaml#
+
+    properties:
+      pins:
+        items:
+          enum:
+            - GPIO0
+            - GPIO1
+            - GPIO2
+
+      function:
+        enum:
+          - adc
+          - ldo
+          - gpio_in
+          - gpio_out
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
new file mode 100644
index 000000000000..f333ee2288e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/xlnx,gpio-xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI GPIO controller
+
+maintainers:
+  - Neeli Srinivas <srinivas.neeli@xilinx.com>
+
+description:
+  The AXI GPIO design provides a general purpose input/output interface
+  to an AXI4-Lite interface. The AXI GPIO can be configured as either
+  a single or a dual-channel device. The width of each channel is
+  independently configurable. The channels can be configured to
+  generate an interrupt when a transition on any of their inputs occurs.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,xps-gpio-1.00.a
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-line-names:
+    description: strings describing the names of each gpio line
+    minItems: 1
+    maxItems: 64
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  interrupt-names: true
+
+  xlnx,all-inputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel1 bits in input mode.
+
+  xlnx,all-inputs-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel2 bits in input mode.
+
+  xlnx,all-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel1 bits in output mode.
+
+  xlnx,all-outputs-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel2 bits in output mode.
+
+  xlnx,dout-default:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sets the default value of all the enabled bits of
+                 channel1.
+    default: 0
+
+  xlnx,dout-default-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sets the default value of all the enabled bits of
+                 channel2.
+    default: 0
+
+  xlnx,gpio-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The value defines the bit width of the GPIO channel1.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  xlnx,gpio2-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The value defines the bit width of the GPIO channel2.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  xlnx,interrupt-present:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter enables interrupt control logic
+                 and interrupt registers in GPIO module.
+    minimum: 0
+    maximum: 1
+    default: 0
+
+  xlnx,is-dual:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter enables a second GPIO channel (GPIO2).
+    minimum: 0
+    maximum: 1
+    default: 0
+
+  xlnx,tri-default:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This value configures the input or output mode
+                 of each bit of GPIO channel1.
+
+  xlnx,tri-default-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This value configures the input or output mode
+                 of each bit of GPIO channel2.
+
+required:
+  - reg
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        gpio@e000a000 {
+            compatible = "xlnx,xps-gpio-1.00.a";
+            reg = <0xa0020000 0x10000>;
+            #gpio-cells = <2>;
+            #interrupt-cells = <0x2>;
+            clocks = <&zynqmp_clk 71>;
+            gpio-controller;
+            interrupt-controller;
+            interrupt-names = "ip2intc_irpt";
+            interrupt-parent = <&gic>;
+            interrupts = <0 89 4>;
+            xlnx,all-inputs = <0x0>;
+            xlnx,all-inputs-2 = <0x0>;
+            xlnx,all-outputs = <0x0>;
+            xlnx,all-outputs-2 = <0x0>;
+            xlnx,dout-default = <0x0>;
+            xlnx,dout-default-2 = <0x0>;
+            xlnx,gpio-width = <0x20>;
+            xlnx,gpio2-width = <0x20>;
+            xlnx,interrupt-present = <0x1>;
+            xlnx,is-dual = <0x1>;
+            xlnx,tri-default = <0xFFFFFFFF>;
+            xlnx,tri-default-2 = <0xFFFFFFFF>;
+        };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
new file mode 100644
index 000000000000..31c0fc345903
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ZynqMP Mode Pin GPIO controller
+
+description:
+  PS_MODE is 4-bits boot mode pins sampled on POR deassertion. Mode Pin
+  GPIO controller with configurable from numbers of pins (from 0 to 3 per
+  PS_MODE). Every pin can be configured as input/output.
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@xilinx.com>
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-gpio-modepin
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    zynqmp-firmware {
+        gpio {
+            compatible = "xlnx,zynqmp-gpio-modepin";
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
index d102888c1be7..a36aec27069c 100644
--- a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
@@ -49,6 +49,8 @@ required:
   - "#gpio-cells"
   - gpio-controller
 
+additionalProperties: false
+
 examples:
   - |
     logicvc: logicvc@43c00000 {
diff --git a/Documentation/devicetree/bindings/gpio/zx296702-gpio.txt b/Documentation/devicetree/bindings/gpio/zx296702-gpio.txt
deleted file mode 100644
index 0dab156fcf41..000000000000
--- a/Documentation/devicetree/bindings/gpio/zx296702-gpio.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-ZTE ZX296702 GPIO controller
-
-Required properties:
-- compatible : "zte,zx296702-gpio"
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters:
-  - bit 0 specifies polarity (0 for normal, 1 for inverted)
-- gpio-controller : Marks the device node as a GPIO controller.
-- interrupts : Interrupt mapping for GPIO IRQ.
-- gpio-ranges : Interaction with the PINCTRL subsystem.
-
-gpio1: gpio@b008040 {
-	compatible = "zte,zx296702-gpio";
-	reg = <0xb008040 0x40>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	gpio-ranges = < &pmx0 0 54 2 &pmx0 2 59 14>;
-	interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-parent = <&intc>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	clock-names = "gpio_pclk";
-	clocks = <&lsp0clk ZX296702_GPIO_CLK>;
-};
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index e8b99adcb1bd..78964c140b46 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -14,35 +14,85 @@ properties:
     pattern: '^gpu@[a-f0-9]+$'
 
   compatible:
-    items:
-      - enum:
-          - amlogic,meson-g12a-mali
-          - realtek,rtd1619-mali
-          - rockchip,px30-mali
-      - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson-g12a-mali
+              - mediatek,mt8183-mali
+              - realtek,rtd1619-mali
+              - renesas,r9a07g044-mali
+              - renesas,r9a07g054-mali
+              - rockchip,px30-mali
+              - rockchip,rk3568-mali
+          - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
+      - items:
+          - enum:
+              - mediatek,mt8192-mali
+          - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
 
   reg:
     maxItems: 1
 
   interrupts:
+    minItems: 3
     items:
       - description: Job interrupt
       - description: MMU interrupt
       - description: GPU interrupt
+      - description: Event interrupt
 
   interrupt-names:
+    minItems: 3
     items:
       - const: job
       - const: mmu
       - const: gpu
+      - const: event
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  clock-names: true
 
   mali-supply: true
 
+  sram-supply: true
+
   operating-points-v2: true
 
+  power-domains:
+    minItems: 1
+    maxItems: 3
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names: true
+
+  "#cooling-cells":
+    const: 2
+
+  dynamic-power-coefficient:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description:
+      A u32 value that represents the running time dynamic
+      power coefficient in units of uW/MHz/V^2. The
+      coefficient can either be calculated from power
+      measurements or derived by analysis.
+
+      The dynamic power consumption of the GPU is
+      proportional to the square of the Voltage (V) and
+      the clock frequency (f). The coefficient is used to
+      calculate the dynamic power as below -
+
+      Pdyn = dynamic-power-coefficient * V^2 * f
+
+      where voltage is in V, frequency is in MHz.
+
+  dma-coherent: true
+
 required:
   - compatible
   - reg
@@ -50,6 +100,8 @@ required:
   - interrupt-names
   - clocks
 
+additionalProperties: false
+
 allOf:
   - if:
       properties:
@@ -57,11 +109,79 @@ allOf:
           contains:
             const: amlogic,meson-g12a-mali
     then:
+      required:
+        - resets
+  - if:
       properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g044-mali
+              - renesas,r9a07g054-mali
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+        interrupt-names:
+          minItems: 4
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: gpu
+            - const: bus
+            - const: bus_ace
         resets:
-          minItems: 2
+          minItems: 3
+        reset-names:
+          items:
+            - const: rst
+            - const: axi_rst
+            - const: ace_rst
       required:
+        - clock-names
+        - power-domains
         - resets
+        - reset-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183-mali
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+            - const: core2
+
+      required:
+        - sram-supply
+        - power-domains
+        - power-domain-names
+    else:
+      properties:
+        power-domains:
+          maxItems: 1
+        sram-supply: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-mali
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: gpu
+            - const: bus
+      required:
+        - clock-names
 
 examples:
   - |
@@ -81,7 +201,7 @@ examples:
       resets = <&reset 0>, <&reset 1>;
     };
 
-    gpu_opp_table: opp_table0 {
+    gpu_opp_table: opp-table {
       compatible = "operating-points-v2";
 
       opp-533000000 {
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 8d966f3ff3db..2a25384ca3ef 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -16,33 +16,33 @@ properties:
     oneOf:
       - items:
           - enum:
-             - samsung,exynos5250-mali
+              - samsung,exynos5250-mali
           - const: arm,mali-t604
       - items:
           - enum:
-             - samsung,exynos5420-mali
+              - samsung,exynos5420-mali
           - const: arm,mali-t628
       - items:
           - enum:
-             - allwinner,sun50i-h6-mali
+              - allwinner,sun50i-h6-mali
           - const: arm,mali-t720
       - items:
           - enum:
-             - amlogic,meson-gxm-mali
-             - realtek,rtd1295-mali
+              - amlogic,meson-gxm-mali
+              - realtek,rtd1295-mali
           - const: arm,mali-t820
       - items:
           - enum:
-             - arm,juno-mali
+              - arm,juno-mali
           - const: arm,mali-t624
       - items:
           - enum:
-             - rockchip,rk3288-mali
-             - samsung,exynos5433-mali
+              - rockchip,rk3288-mali
+              - samsung,exynos5433-mali
           - const: arm,mali-t760
       - items:
           - enum:
-             - rockchip,rk3399-mali
+              - rockchip,rk3399-mali
           - const: arm,mali-t860
 
           # "arm,mali-t830"
@@ -74,6 +74,11 @@ properties:
       - const: bus
 
   mali-supply: true
+  opp-table:
+    type: object
+
+  power-domains:
+    maxItems: 1
 
   resets:
     minItems: 1
@@ -84,6 +89,25 @@ properties:
   "#cooling-cells":
     const: 2
 
+  dma-coherent: true
+
+  dynamic-power-coefficient:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description:
+      A u32 value that represents the running time dynamic
+      power coefficient in units of uW/MHz/V^2. The
+      coefficient can either be calculated from power
+      measurements or derived by analysis.
+
+      The dynamic power consumption of the GPU is
+      proportional to the square of the Voltage (V) and
+      the clock frequency (f). The coefficient is used to
+      calculate the dynamic power as below -
+
+      Pdyn = dynamic-power-coefficient * V^2 * f
+
+      where voltage is in V, frequency is in MHz.
+
 required:
   - compatible
   - reg
@@ -91,6 +115,8 @@ required:
   - interrupt-names
   - clocks
 
+additionalProperties: false
+
 allOf:
   - if:
       properties:
@@ -135,7 +161,7 @@ examples:
       #cooling-cells = <2>;
     };
 
-    gpu_opp_table: opp_table0 {
+    gpu_opp_table: opp-table {
       compatible = "operating-points-v2";
 
       opp-533000000 {
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index afde81be3c29..318122d95eb5 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -8,7 +8,7 @@ title: ARM Mali Utgard GPU
 
 maintainers:
   - Rob Herring <robh@kernel.org>
-  - Maxime Ripard <maxime.ripard@free-electrons.com>
+  - Maxime Ripard <mripard@kernel.org>
   - Heiko Stuebner <heiko@sntech.de>
 
 properties:
@@ -25,6 +25,7 @@ properties:
               - allwinner,sun4i-a10-mali
               - allwinner,sun7i-a20-mali
               - allwinner,sun8i-h3-mali
+              - allwinner,sun8i-r40-mali
               - allwinner,sun50i-a64-mali
               - rockchip,rk3036-mali
               - rockchip,rk3066-mali
@@ -41,6 +42,7 @@ properties:
               - amlogic,meson-gxbb-mali
               - amlogic,meson-gxl-mali
               - hisilicon,hi6220-mali
+              - mediatek,mt7623-mali
               - rockchip,rk3328-mali
           - const: arm,mali-450
 
@@ -99,6 +101,9 @@ properties:
 
   mali-supply: true
 
+  opp-table:
+    type: object
+
   power-domains:
     maxItems: 1
 
@@ -107,6 +112,9 @@ properties:
 
   operating-points-v2: true
 
+  "#cooling-cells":
+    const: 2
+
 required:
   - compatible
   - reg
@@ -115,6 +123,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 allOf:
   - if:
       properties:
@@ -123,11 +133,13 @@ allOf:
             enum:
               - allwinner,sun4i-a10-mali
               - allwinner,sun7i-a20-mali
+              - allwinner,sun8i-r40-mali
               - allwinner,sun50i-a64-mali
               - allwinner,sun50i-h5-mali
               - amlogic,meson8-mali
               - amlogic,meson8b-mali
               - hisilicon,hi6220-mali
+              - mediatek,mt7623-mali
               - rockchip,rk3036-mali
               - rockchip,rk3066-mali
               - rockchip,rk3188-mali
@@ -162,6 +174,7 @@ examples:
       clocks = <&ccu 1>, <&ccu 2>;
       clock-names = "bus", "core";
       resets = <&ccu 1>;
+      #cooling-cells = <2>;
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
deleted file mode 100644
index b2df82b44625..000000000000
--- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Broadcom V3D GPU
-
-Only the Broadcom V3D 3.x and newer GPUs are covered by this binding.
-For V3D 2.x, see brcm,bcm-vc4.txt.
-
-Required properties:
-- compatible:	Should be "brcm,7268-v3d" or "brcm,7278-v3d"
-- reg:		Physical base addresses and lengths of the register areas
-- reg-names:	Names for the register areas.  The "hub" and "core0"
-		  register areas are always required.  The "gca" register area
-		  is required if the GCA cache controller is present.  The
-		  "bridge" register area is required if an external reset
-		  controller is not present.
-- interrupts:	The interrupt numbers.  The first interrupt is for the hub,
-		  while the following interrupts are separate interrupt lines
-		  for the cores (if they don't share the hub's interrupt).
-		  See bindings/interrupt-controller/interrupts.txt
-
-Optional properties:
-- clocks:	The core clock the unit runs on
-- resets:	The reset line for v3d, if not using a mapping of the bridge
-		  See bindings/reset/reset.txt
-
-v3d {
-	compatible = "brcm,7268-v3d";
-	reg = <0xf1204000 0x100>,
-	      <0xf1200000 0x4000>,
-	      <0xf1208000 0x4000>,
-	      <0xf1204100 0x100>;
-	reg-names = "bridge", "hub", "core0", "gca";
-	interrupts = <0 78 4>,
-		     <0 77 4>;
-};
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
new file mode 100644
index 000000000000..217c42874f41
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/brcm,bcm-v3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom V3D GPU Bindings
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+
+  compatible:
+    enum:
+      - brcm,2711-v3d
+      - brcm,7268-v3d
+      - brcm,7278-v3d
+
+  reg:
+    items:
+      - description: hub register (required)
+      - description: core0 register (required)
+      - description: GCA cache controller register (if GCA controller present)
+      - description: bridge register (if no external reset controller)
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: hub
+      - const: core0
+      - enum: [ bridge, gca ]
+      - enum: [ bridge, gca ]
+    minItems: 2
+
+  interrupts:
+    items:
+      - description: hub interrupt (required)
+      - description: core interrupts (if it doesn't share the hub's interrupt)
+    minItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    gpu@f1200000 {
+      compatible = "brcm,7268-v3d";
+      reg = <0xf1200000 0x4000>,
+            <0xf1208000 0x4000>,
+            <0xf1204000 0x100>,
+            <0xf1204100 0x100>;
+      reg-names = "hub", "core0", "bridge", "gca";
+      interrupts = <0 78 4>,
+                   <0 77 4>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
new file mode 100644
index 000000000000..3cf862976448
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvdec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree binding for NVIDIA Tegra NVDEC
+
+description: |
+  NVDEC is the hardware video decoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvdec@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvdec
+      - nvidia,tegra186-nvdec
+      - nvidia,tegra194-nvdec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvdec
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    items:
+      - description: DMA read memory client
+      - description: DMA read 2 memory client
+      - description: DMA write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: read-1
+      - const: write
+
+  nvidia,host1x-class:
+    description: |
+      Host1x class of the engine, used to specify the targeted engine
+      when programming the engine through Host1x channels or when
+      configuring engine-specific behavior in Host1x.
+    default: 0xf0
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvdec@15480000 {
+            compatible = "nvidia,tegra186-nvdec";
+            reg = <0x15480000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVDEC>;
+            clock-names = "nvdec";
+            resets = <&bpmp TEGRA186_RESET_NVDEC>;
+            reset-names = "nvdec";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVDEC>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD1 &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDECSWR &emc>;
+            interconnect-names = "dma-mem", "read-1", "write";
+            iommus = <&smmu TEGRA186_SID_NVDEC>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
new file mode 100644
index 000000000000..e63ae1a00818
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvenc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree binding for NVIDIA Tegra NVENC
+
+description: |
+  NVENC is the hardware video encoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvenc@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvenc
+      - nvidia,tegra186-nvenc
+      - nvidia,tegra194-nvenc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvenc
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    minItems: 2
+    maxItems: 3
+
+  interconnect-names:
+    minItems: 2
+    maxItems: 3
+
+  nvidia,host1x-class:
+    description: |
+      Host1x class of the engine, used to specify the targeted engine
+      when programming the engine through Host1x channels or when
+      configuring engine-specific behavior in Host1x.
+    default: 0x21
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nvidia,tegra210-nvenc
+            - nvidia,tegra186-nvenc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: DMA read memory client
+            - description: DMA write memory client
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: write
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nvidia,tegra194-nvenc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: DMA read memory client
+            - description: DMA read 2 memory client
+            - description: DMA write memory client
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: read-1
+            - const: write
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvenc@154c0000 {
+            compatible = "nvidia,tegra186-nvenc";
+            reg = <0x154c0000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVENC>;
+            clock-names = "nvenc";
+            resets = <&bpmp TEGRA186_RESET_NVENC>;
+            reset-names = "nvenc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_MPE>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVENCSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVENCSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu TEGRA186_SID_NVENC>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
new file mode 100644
index 000000000000..8647404d67e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvjpg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree binding for NVIDIA Tegra NVJPG
+
+description: |
+  NVJPG is the hardware JPEG decoder and encoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically programmed
+  through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvjpg@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvjpg
+      - nvidia,tegra186-nvjpg
+      - nvidia,tegra194-nvjpg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvjpg
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvjpg
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    items:
+      - description: DMA read memory client
+      - description: DMA write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvjpg@15380000 {
+            compatible = "nvidia,tegra186-nvjpg";
+            reg = <0x15380000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVJPG>;
+            clock-names = "nvjpg";
+            resets = <&bpmp TEGRA186_RESET_NVJPG>;
+            reset-names = "nvjpg";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVJPG>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVJPGSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVJPGSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu TEGRA186_SID_NVJPG>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
index f32bbba4d3bc..cc6ce5221a38 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
@@ -6,6 +6,7 @@ Required properties:
   - nvidia,gk20a
   - nvidia,gm20b
   - nvidia,gp10b
+  - nvidia,gv11b
 - reg: Physical base address and length of the controller's registers.
   Must contain two entries:
   - first entry for bar0
@@ -25,6 +26,9 @@ Required properties:
 If the compatible string is "nvidia,gm20b", then the following clock
 is also required:
   - ref
+If the compatible string is "nvidia,gv11b", then the following clock is also
+required:
+  - fuse
 - resets: Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
 - reset-names: Must include the following entries:
@@ -88,3 +92,24 @@ Example for GP10B:
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
 		iommus = <&smmu TEGRA186_SID_GPU>;
 	};
+
+Example for GV11B:
+
+	gpu@17000000 {
+		compatible = "nvidia,gv11b";
+		reg = <0x17000000 0x1000000>,
+		      <0x18000000 0x1000000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&bpmp TEGRA194_CLK_GPCCLK>,
+			 <&bpmp TEGRA194_CLK_GPU_PWR>,
+			 <&bpmp TEGRA194_CLK_FUSE>;
+		clock-names = "gpu", "pwr", "fuse";
+		resets = <&bpmp TEGRA194_RESET_GPU>;
+		reset-names = "gpu";
+		dma-coherent;
+
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>;
+		iommus = <&smmu TEGRA194_SID_GPU>;
+	};
diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
index f4dfa6fc724c..d60626ffb28e 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
+++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -22,6 +22,12 @@ properties:
   interrupts:
     maxItems: 1
 
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
   clocks:
     maxItems: 1
 
@@ -36,6 +42,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     rotator@12810000 {
@@ -45,4 +53,3 @@ examples:
         clocks = <&clock 278>;
         clock-names = "rotator";
     };
-
diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
new file mode 100644
index 000000000000..93e7244cdc0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/vivante,gc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Vivante GPU Bindings
+
+description: Vivante GPU core devices
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+properties:
+  compatible:
+    const: vivante,gc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#cooling-cells':
+    const: 2
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+
+  clocks:
+    items:
+      - description: AXI/master interface clock
+      - description: GPU core clock
+      - description: Shader clock (only required if GPU has feature PIPE_3D)
+      - description: AHB/slave interface clock (only required if GPU can gate
+          slave interface independently)
+    minItems: 1
+
+  clock-names:
+    items:
+      enum: [ bus, core, shader, reg ]
+    minItems: 1
+    maxItems: 4
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    gpu@130000 {
+      compatible = "vivante,gc";
+      reg = <0x00130000 0x4000>;
+      interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+               <&clks IMX6QDL_CLK_GPU3D_CORE>,
+               <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+      clock-names = "bus", "core", "shader";
+      power-domains = <&gpc 1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/graph.txt b/Documentation/devicetree/bindings/graph.txt
index 0415e2c53ba0..14733b5cb61e 100644
--- a/Documentation/devicetree/bindings/graph.txt
+++ b/Documentation/devicetree/bindings/graph.txt
@@ -1,128 +1 @@
-Common bindings for device graphs
-
-General concept
----------------
-
-The hierarchical organisation of the device tree is well suited to describe
-control flow to devices, but there can be more complex connections between
-devices that work together to form a logical compound device, following an
-arbitrarily complex graph.
-There already is a simple directed graph between devices tree nodes using
-phandle properties pointing to other nodes to describe connections that
-can not be inferred from device tree parent-child relationships. The device
-tree graph bindings described herein abstract more complex devices that can
-have multiple specifiable ports, each of which can be linked to one or more
-ports of other devices.
-
-These common bindings do not contain any information about the direction or
-type of the connections, they just map their existence. Specific properties
-may be described by specialized bindings depending on the type of connection.
-
-To see how this binding applies to video pipelines, for example, see
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-Here the ports describe data interfaces, and the links between them are
-the connecting data buses. A single port with multiple connections can
-correspond to multiple devices being connected to the same physical bus.
-
-Organisation of ports and endpoints
------------------------------------
-
-Ports are described by child 'port' nodes contained in the device node.
-Each port node contains an 'endpoint' subnode for each remote device port
-connected to this port. If a single port is connected to more than one
-remote device, an 'endpoint' child node must be provided for each link.
-If more than one port is present in a device node or there is more than one
-endpoint at a port, or a port node needs to be associated with a selected
-hardware interface, a common scheme using '#address-cells', '#size-cells'
-and 'reg' properties is used to number the nodes.
-
-device {
-        ...
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        port@0 {
-	        #address-cells = <1>;
-	        #size-cells = <0>;
-		reg = <0>;
-
-                endpoint@0 {
-			reg = <0>;
-			...
-		};
-                endpoint@1 {
-			reg = <1>;
-			...
-		};
-        };
-
-        port@1 {
-		reg = <1>;
-
-		endpoint { ... };
-	};
-};
-
-All 'port' nodes can be grouped under an optional 'ports' node, which
-allows to specify #address-cells, #size-cells properties for the 'port'
-nodes independently from any other child device nodes a device might
-have.
-
-device {
-        ...
-        ports {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                port@0 {
-                        ...
-                        endpoint@0 { ... };
-                        endpoint@1 { ... };
-                };
-
-                port@1 { ... };
-        };
-};
-
-Links between endpoints
------------------------
-
-Each endpoint should contain a 'remote-endpoint' phandle property that points
-to the corresponding endpoint in the port of the remote device. In turn, the
-remote endpoint should contain a 'remote-endpoint' property. If it has one, it
-must not point to anything other than the local endpoint. Two endpoints with
-their 'remote-endpoint' phandles pointing at each other form a link between the
-containing ports.
-
-device-1 {
-        port {
-                device_1_output: endpoint {
-                        remote-endpoint = <&device_2_input>;
-                };
-        };
-};
-
-device-2 {
-        port {
-                device_2_input: endpoint {
-                        remote-endpoint = <&device_1_output>;
-                };
-        };
-};
-
-Required properties
--------------------
-
-If there is more than one 'port' or more than one 'endpoint' node or 'reg'
-property present in the port and/or endpoint nodes then the following
-properties are required in a relevant parent node:
-
- - #address-cells : number of cells required to define port/endpoint
-                    identifier, should be 1.
- - #size-cells    : should be zero.
-
-Optional endpoint properties
-----------------------------
-
-- remote-endpoint: phandle to an 'endpoint' subnode of a remote device node.
-
+This file has moved to graph.yaml in dt-schema repo
diff --git a/Documentation/devicetree/bindings/h8300/cpu.txt b/Documentation/devicetree/bindings/h8300/cpu.txt
deleted file mode 100644
index 70cd58608f4b..000000000000
--- a/Documentation/devicetree/bindings/h8300/cpu.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* H8/300 CPU bindings
-
-Required properties:
-
-- compatible: Compatible property value should be "renesas,h8300".
-- clock-frequency: Contains the clock frequency for CPU, in Hz.
-
-Example:
-
-		cpu@0 {
-			compatible = "renesas,h8300";
-			clock-frequency = <20000000>;
-		};
diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml
index 7f8d17f33983..792f371cec03 100644
--- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml
+++ b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml
@@ -1,7 +1,7 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/renesas,prr.yaml#
+$id: http://devicetree.org/schemas/hwinfo/renesas,prr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas Product Register
@@ -27,9 +27,11 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     prr: chipid@ff000044 {
         compatible = "renesas,prr";
-        reg = <0 0xff000044 0 4>;
+        reg = <0xff000044 4>;
     };
diff --git a/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml
new file mode 100644
index 000000000000..95cbdcb56efe
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/samsung,exynos-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series Chipid driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-chipid
+      - samsung,exynos850-chipid
+
+  reg:
+    maxItems: 1
+
+  samsung,asv-bin:
+    description:
+      Adaptive Supply Voltage bin selection. This can be used
+      to determine the ASV bin of an SoC if respective information
+      is missing in the CHIPID registers or in the OTP memory.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@10000000 {
+        compatible = "samsung,exynos4210-chipid";
+        reg = <0x10000000 0x100>;
+        samsung,asv-bin = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml
new file mode 100644
index 000000000000..563ded4fca83
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/samsung,s5pv210-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 SoC ChipID
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: samsung,s5pv210-chipid
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@e0000000 {
+        compatible = "samsung,s5pv210-chipid";
+        reg = <0xe0000000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml b/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
new file mode 100644
index 000000000000..dada28b47ea0
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/ti,k3-socinfo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Multicore SoC platforms chipid module
+
+maintainers:
+  - Tero Kristo <t-kristo@ti.com>
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Texas Instruments (ARM64) K3 Multicore SoC platforms chipid module is
+  represented by CTRLMMR_xxx_JTAGID register which contains information about
+  SoC id and revision.
+
+properties:
+  $nodename:
+    pattern: "^chipid@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: ti,am654-chipid
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@43000014 {
+        compatible = "ti,am654-chipid";
+        reg = <0x43000014 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
new file mode 100644
index 000000000000..10e5a53e447b
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwlock/allwinner,sun6i-a31-hwspinlock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SUN6I hardware spinlock driver for Allwinner sun6i compatible SoCs
+
+maintainers:
+  - Wilken Gottwalt <wilken.gottwalt@posteo.net>
+
+description:
+  The hardware unit provides semaphores between the ARM cores and the embedded
+  companion core on the SoC.
+
+properties:
+  compatible:
+    const: allwinner,sun6i-a31-hwspinlock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+    #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+    hwlock@1c18000 {
+        compatible = "allwinner,sun6i-a31-hwspinlock";
+        reg = <0x01c18000 0x1000>;
+        clocks = <&ccu CLK_BUS_SPINLOCK>;
+        resets = <&ccu RST_BUS_SPINLOCK>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
deleted file mode 100644
index 8d365f89694c..000000000000
--- a/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-TI HwSpinlock for OMAP and K3 based SoCs
-=========================================
-
-Required properties:
-- compatible:		Should be one of the following,
-			  "ti,omap4-hwspinlock" for
-				OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs
-			  "ti,am654-hwspinlock" for
-				K3 AM65x and J721E SoCs
-- reg:			Contains the hwspinlock module register address space
-			(base address and length)
-- ti,hwmods:		Name of the hwmod associated with the hwspinlock device
-			(for OMAP architecture based SoCs only)
-- #hwlock-cells:	Should be 1. The OMAP hwspinlock users will use a
-			0-indexed relative hwlock number as the argument
-			specifier value for requesting a specific hwspinlock
-			within a hwspinlock bank.
-
-Please look at the generic hwlock binding for usage information for consumers,
-"Documentation/devicetree/bindings/hwlock/hwlock.txt"
-
-Example:
-
-1. OMAP4 SoCs
-hwspinlock: spinlock@4a0f6000 {
-	compatible = "ti,omap4-hwspinlock";
-	reg = <0x4a0f6000 0x1000>;
-	ti,hwmods = "spinlock";
-	#hwlock-cells = <1>;
-};
-
-2. AM65x SoCs and J721E SoCs
-&cbass_main {
-	cbass_main_navss: interconnect0 {
-		hwspinlock: spinlock@30e00000 {
-			compatible = "ti,am654-hwspinlock";
-			reg = <0x00 0x30e00000 0x00 0x1000>;
-			#hwlock-cells = <1>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt
deleted file mode 100644
index 4563f524556b..000000000000
--- a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Qualcomm Hardware Mutex Block:
-
-The hardware block provides mutexes utilized between different processors on
-the SoC as part of the communication protocol used by these processors.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,sfpb-mutex",
-		    "qcom,tcsr-mutex"
-
-- syscon:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: one cell containing:
-		    syscon phandle
-		    offset of the hwmutex block within the syscon
-		    stride of the hwmutex registers
-
-- #hwlock-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 1, the specified cell represent the lock id
-		    (hwlock standard property, see hwlock.txt)
-
-Example:
-
-	tcsr_mutex_block: syscon@fd484000 {
-		compatible = "syscon";
-		reg = <0xfd484000 0x2000>;
-	};
-
-	hwlock@fd484000 {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_block 0 0x80>;
-
-		#hwlock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
new file mode 100644
index 000000000000..ee2726149cf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwlock/qcom-hwspinlock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Hardware Mutex Block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  The hardware block provides mutexes utilized between different processors on
+  the SoC as part of the communication protocol used by these processors.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sfpb-mutex
+          - qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,apq8084-tcsr-mutex
+              - qcom,ipq6018-tcsr-mutex
+              - qcom,msm8226-tcsr-mutex
+              - qcom,msm8994-tcsr-mutex
+          - const: qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,msm8974-tcsr-mutex
+          - const: qcom,tcsr-mutex
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#hwlock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#hwlock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    hwlock@1f40000 {
+        compatible = "qcom,tcsr-mutex";
+        reg = <0x01f40000 0x40000>;
+        #hwlock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt
deleted file mode 100644
index 9bb1240a68e0..000000000000
--- a/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-SIRF Hardware spinlock device Binding
------------------------------------------------
-
-Required properties :
-- compatible : shall contain only one of the following:
-	"sirf,hwspinlock"
-
-- reg : the register address of hwspinlock
-
-- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
-	hwlock, so the number of cells should be <1> here.
-
-Please look at the generic hwlock binding for usage information for consumers,
-"Documentation/devicetree/bindings/hwlock/hwlock.txt"
-
-Example of hwlock provider:
-	hwlock {
-		compatible = "sirf,hwspinlock";
-		reg = <0x13240000 0x00010000>;
-		#hwlock-cells = <1>;
-	};
-
-Example of hwlock users:
-	node {
-		...
-		hwlocks = <&hwlock 2>;
-		...
-	};
diff --git a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
index 47cf9c8d97e9..b18c616035a8 100644
--- a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
+++ b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
@@ -7,8 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 Hardware Spinlock bindings
 
 maintainers:
-  - Benjamin Gaignard <benjamin.gaignard@st.com>
-  - Fabien Dessenne <fabien.dessenne@st.com>
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
 
 properties:
   "#hwlock-cells":
diff --git a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
new file mode 100644
index 000000000000..0a955c7b9706
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwlock/ti,omap-hwspinlock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI HwSpinlock for OMAP and K3 based SoCs
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,omap4-hwspinlock  # for OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs
+      - ti,am64-hwspinlock   # for K3 AM64x SoCs
+      - ti,am654-hwspinlock  # for K3 AM65x, J721E and J7200 SoCs
+
+  reg:
+    maxItems: 1
+
+  "#hwlock-cells":
+    const: 1
+    description: |
+      The OMAP hwspinlock users will use a 0-indexed relative hwlock number as
+      the argument specifier value for requesting a specific hwspinlock within
+      a hwspinlock bank.
+
+      Please look at the generic hwlock binding for usage information for
+      consumers, "Documentation/devicetree/bindings/hwlock/hwlock.txt"
+
+required:
+  - compatible
+  - reg
+  - "#hwlock-cells"
+
+additionalProperties: false
+
+examples:
+
+  - |
+    spinlock@4a0f6000 {
+        compatible = "ti,omap4-hwspinlock";
+        reg = <0x4a0f6000 0x1000>;
+        #hwlock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ad741x.txt b/Documentation/devicetree/bindings/hwmon/ad741x.txt
deleted file mode 100644
index 9102152c8410..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ad741x.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* AD7416/AD7417/AD7418 Temperature Sensor Device Tree Bindings
-
-Required properties:
-- compatible: one of
-		"adi,ad7416"
-		"adi,ad7417"
-		"adi,ad7418"
-- reg: I2C address
-
-Example:
-
-hwmon@28 {
-	compatible = "adi,ad7418";
-	reg = <0x28>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml b/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
new file mode 100644
index 000000000000..ce7f8ce9da0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/adi,ad741x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7416/AD7417/AD7418 temperature sensors
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7416
+      - adi,ad7417
+      - adi,ad7418
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@28 {
+            compatible = "adi,ad7418";
+            reg = <0x28>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
index 2a9822075b36..d794deb08bb7 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
@@ -8,7 +8,6 @@ title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Beniamin Bia <beniamin.bia@analog.com>
 
 description: |
   Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
@@ -47,6 +46,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
new file mode 100644
index 000000000000..43b4f4f57b49
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,adm1266.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1266 Cascadable Super Sequencer with Margin
+  Control and Fault Recording
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  Analog Devices ADM1266 Cascadable Super Sequencer with Margin
+  Control and Fault Recording.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1266
+
+  reg:
+    description: |
+      I2C address of slave device.
+    items:
+      minimum: 0x40
+      maximum: 0x4F
+
+  avcc-supply:
+    description: |
+      Phandle to the Avcc power supply.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adm1266@40 {
+                compatible = "adi,adm1266";
+                reg = <0x40>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
new file mode 100644
index 000000000000..ab87f51c5aef
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The ADM1293 and ADM1294 are high accuracy integrated digital power monitors
+  that offer digital current, voltage, and power monitoring using an on-chip,
+  12-bit analog-to-digital converter (ADC), communicated through a PMBus
+  compliant I2C interface.
+
+  Datasheets:
+    https://www.analog.com/en/products/adm1294.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1075
+      - adi,adm1272
+      - adi,adm1275
+      - adi,adm1276
+      - adi,adm1278
+      - adi,adm1293
+      - adi,adm1294
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt resistor value in micro-Ohm.
+
+  adi,volt-curr-sample-average:
+    description: |
+      Number of samples to be used to report voltage and current values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+
+  adi,power-sample-average:
+    description: |
+      Number of samples to be used to report power values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1075
+              - adi,adm1276
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1275
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 16
+        adi,power-sample-average: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1272
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average:
+          default: 128
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1278
+              - adi,adm1293
+              - adi,adm1294
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average:
+          default: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-sensor@10 {
+            compatible = "adi,adm1272";
+            reg = <0x10>;
+            shunt-resistor-micro-ohms = <500>;
+            adi,volt-curr-sample-average = <128>;
+            adi,power-sample-average = <128>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
new file mode 100644
index 000000000000..f2f99afb3a3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI FAN Control
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |+
+  Bindings for the Analog Devices AXI FAN Control driver. Spefications of the
+  core can be found in:
+
+  https://wiki.analog.com/resources/fpga/docs/axi_fan_control
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-fan-control-1.00.a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  pulses-per-revolution:
+    description:
+      Value specifying the number of pulses per revolution of the controlled
+      FAN.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - pulses-per-revolution
+
+additionalProperties: false
+
+examples:
+  - |
+    fpga_axi: fpga-axi {
+            #address-cells = <0x2>;
+            #size-cells = <0x1>;
+
+            axi_fan_control: axi-fan-control@80000000 {
+                    compatible = "adi,axi-fan-control-1.00.a";
+                    reg = <0x0 0x80000000 0x10000>;
+                    clocks = <&clk 71>;
+                    interrupts = <0 110 0>;
+                    pulses-per-revolution = <2>;
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
index 6a742a51e2f9..bf04151b63d2 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
@@ -38,20 +38,17 @@ properties:
       the accumulated values, this entry can also have two items which sets
       energy1/charge1 and energy2/charger2 respectively. Check table 12 of the
       datasheet for more information on the supported options.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 2
-        maxItems: 2
-        items:
-          enum: [0, 1, 2, 3]
-          default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      enum: [0, 1, 2, 3]
+      default: 0
 
   adi,accumulation-deadband-microamp:
     description:
       This property controls the Accumulation Dead band which allows to set the
       level of current below which no accumulation takes place.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 255
     default: 0
 
@@ -61,8 +58,7 @@ properties:
       active high, setting it to zero makets it active low. When this property
       is present, the GPIO is automatically configured as output and set to
       control a fan as a function of measured temperature.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
     default: 0
 
@@ -74,19 +70,20 @@ properties:
       registers. Check table 13 of the datasheet for more information on the
       supported options. This property cannot be used together with
       adi,gpio-out-pol.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 2
-        maxItems: 2
-        items:
-          enum: [0, 1, 2]
-          default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      enum: [0, 1, 2]
+      default: 0
 
 required:
   - compatible
   - reg
 
 
+additionalProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
new file mode 100644
index 000000000000..64a8fcb7bc46
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc2992.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology 2992 Power Monitor
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  Linear Technology 2992 Dual Wide Range Power Monitor
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2992.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2992
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  avcc-supply: true
+
+patternProperties:
+  "^channel@([0-1])$":
+    type: object
+    description: |
+      Represents the two supplies to be monitored.
+
+    properties:
+      reg:
+        description: |
+          The channel number. LTC2992 can monitor two supplies.
+        items:
+          minimum: 0
+          maximum: 1
+
+      shunt-resistor-micro-ohms:
+        description:
+          The value of curent sense resistor in microohms.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ltc2992@6F {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                compatible = "adi,ltc2992";
+                reg = <0x6F>;
+
+                channel@0 {
+                        reg = <0x0>;
+                        shunt-resistor-micro-ohms = <10000>;
+                };
+
+                channel@1 {
+                        reg = <0x1>;
+                        shunt-resistor-micro-ohms = <10000>;
+                };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml
new file mode 100644
index 000000000000..9f2d08d7b978
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,max31760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31760 Fan-Speed Controller
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+description: |
+  Analog Devices MAX31760 Fan-Speed Controller
+  https://datasheets.maximintegrated.com/en/ds/MAX31760.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,max31760
+
+  reg:
+    description: I2C address of slave device.
+    minimum: 0x50
+    maximum: 0x57
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan-controller@50 {
+            reg = <0x50>;
+            compatible = "adi,max31760";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt
deleted file mode 100644
index 1ecd03f3da4d..000000000000
--- a/Documentation/devicetree/bindings/hwmon/adm1275.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-adm1275 properties
-
-Required properties:
-- compatible: Must be one of the supported compatible strings:
-	- "adi,adm1075" for adm1075
-	- "adi,adm1272" for adm1272
-	- "adi,adm1275" for adm1275
-	- "adi,adm1276" for adm1276
-	- "adi,adm1278" for adm1278
-	- "adi,adm1293" for adm1293
-	- "adi,adm1294" for adm1294
-- reg: I2C address
-
-Optional properties:
-
-- shunt-resistor-micro-ohms
-	Shunt resistor value in micro-Ohm
-
-Example:
-
-adm1272@10 {
-	compatible = "adi,adm1272";
-	reg = <0x10>;
-	shunt-resistor-micro-ohms = <500>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/ads7828.txt b/Documentation/devicetree/bindings/hwmon/ads7828.txt
deleted file mode 100644
index fe0cc4ad7ea9..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ads7828.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-ads7828 properties
-
-Required properties:
-- compatible: Should be one of
-	       ti,ads7828
-	       ti,ads7830
-- reg: I2C address
-
-Optional properties:
-
-- ti,differential-input
-  Set to use the device in differential mode.
-- vref-supply
-  The external reference on the device is set to this regulators output. If it
-  does not exists the internal reference will be used and output by the ads78xx
-  on the "external vref" pin.
-
-  Example ADS7828 node:
-
-  ads7828: ads@48 {
-	   comatible = "ti,ads7828";
-	   reg = <0x48>;
-	   vref-supply = <&vref>;
-	   ti,differential-input;
-  };
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
new file mode 100644
index 000000000000..ea595102a86e
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adt7475.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADT7475 hwmon sensor
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+
+description: |
+  The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple
+  PWN fan controllers.
+
+  They support monitoring and controlling up to four fans (the ADT7490 can only
+  control up to three). They support reading a single on chip temperature
+  sensor and two off chip temperature sensors (the ADT7490 additionally
+  supports measuring up to three current external temperature sensors with
+  series resistance cancellation (SRC)).
+
+  Datasheets:
+  https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF
+
+  Description taken from onsemiconductors specification sheets, with minor
+  rephrasing.
+
+properties:
+  compatible:
+    enum:
+      - adi,adt7473
+      - adi,adt7475
+      - adi,adt7476
+      - adi,adt7490
+
+  reg:
+    maxItems: 1
+
+  adi,pwm-active-state:
+    description: |
+      Integer array, represents the active state of the pwm outputs If set to 0
+      the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
+      uses a logic high output for 100% duty cycle.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 3
+    items:
+      enum: [0, 1]
+      default: 1
+
+patternProperties:
+  "^adi,bypass-attenuator-in[0-4]$":
+    description: |
+      Configures bypassing the individual voltage input attenuator. If
+      set to 1 the attenuator is bypassed if set to 0 the attenuator is
+      not bypassed. If the property is absent then the attenuator
+      retains its configuration from the bios/bootloader.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  "adi,pin(5|10)-function":
+    description: |
+      Configures the function for pin 5 on the adi,adt7473 and adi,adt7475. Or
+      pin 10 on the adi,adt7476 and adi,adt7490.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - pwm2
+      - smbalert#
+
+  "adi,pin(9|14)-function":
+    description: |
+      Configures the function for pin 9 on the adi,adt7473 and adi,adt7475. Or
+      pin 14 on the adi,adt7476 and adi,adt7490
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - tach4
+      - therm#
+      - smbalert#
+      - gpio
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hwmon@2e {
+        compatible = "adi,adt7476";
+        reg = <0x2e>;
+        adi,bypass-attenuator-in0 = <1>;
+        adi,bypass-attenuator-in1 = <0>;
+        adi,pwm-active-state = <1 0 1>;
+        adi,pin10-function = "smbalert#";
+        adi,pin14-function = "tach4";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
new file mode 100644
index 000000000000..7598b083979c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/amd,sbrmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: >
+  Sideband Remote Management Interface (SB-RMI) compliant
+  AMD SoC power device.
+
+maintainers:
+  - Akshay Gupta <Akshay.Gupta@amd.com>
+
+description: |
+  SB Remote Management Interface (SB-RMI) is an SMBus compatible
+  interface that reports AMD SoC's Power (normalized Power) using,
+  Mailbox Service Request and resembles a typical 8-pin remote power
+  sensor's I2C interface to BMC. The power attributes in hwmon
+  reports power in microwatts.
+
+properties:
+  compatible:
+    enum:
+      - amd,sbrmi
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C bus address of the device as specified in Section SBI SMBus Address
+      of the SoC register reference. The SB-RMI address is normally 78h for
+      socket 0 and 70h for socket 1, but it could vary based on hardware
+      address select pins.
+      \[open source SoC register reference\]
+        https://www.amd.com/en/support/tech-docs?keyword=55898
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sbrmi@3c {
+                compatible = "amd,sbrmi";
+                reg = <0x3c>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
new file mode 100644
index 000000000000..446b09f1ce94
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/amd,sbtsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: >
+  Sideband interface Temperature Sensor Interface (SB-TSI) compliant
+  AMD SoC temperature device
+
+maintainers:
+  - Kun Yi <kunyi@google.com>
+  - Supreeth Venkatesh <supreeth.venkatesh@amd.com>
+
+description: |
+  SB Temperature Sensor Interface (SB-TSI) is an SMBus compatible
+  interface that reports AMD SoC's Ttcl (normalized temperature),
+  and resembles a typical 8-pin remote temperature sensor's I2C interface
+  to BMC. The emulated thermal sensor can report temperatures in increments
+  of 0.125 degrees, ranging from 0 to 255.875.
+
+properties:
+  compatible:
+    enum:
+      - amd,sbtsi
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C bus address of the device as specified in Section 6.3.1 of the
+      SoC register reference. The SB-TSI address is normally 98h for socket
+      0 and 90h for socket 1, but it could vary based on hardware address
+      select pins.
+      \[open source SoC register reference\]
+        https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sbtsi@4c {
+                compatible = "amd,sbtsi";
+                reg = <0x4c>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
new file mode 100644
index 000000000000..5d3ce641fcde
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/baikal,bt1-pvt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 PVT Sensor
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  Baikal-T1 SoC provides an embedded process, voltage and temperature
+  sensor to monitor an internal SoC environment (chip temperature, supply
+  voltage and process monitor) and on time detect critical situations,
+  which may cause the system instability and even damages. The IP-block
+  is based on the Analog Bits PVT sensor, but is equipped with a dedicated
+  control wrapper, which provides a MMIO registers-based access to the
+  sensor core functionality (APB3-bus based) and exposes an additional
+  functions like thresholds/data ready interrupts, its status and masks,
+  measurements timeout. Its internal structure is depicted on the next
+  diagram:
+
+     Analog Bits core                     Bakal-T1 PVT control block
+  +--------------------+                  +------------------------+
+  | Temperature sensor |-+         +------| Sensors control        |
+  |--------------------| |<---En---|      |------------------------|
+  | Voltage sensor     |-|<--Mode--| +--->| Sampled data           |
+  |--------------------| |<--Trim--+ |    |------------------------|
+  | Low-Vt sensor      |-|           | +--| Thresholds comparator  |
+  |--------------------| |---Data----| |  |------------------------|
+  | High-Vt sensor     |-|           | +->| Interrupts status      |
+  |--------------------| |--Valid--+-+ |  |------------------------|
+  | Standard-Vt sensor |-+         +---+--| Interrupts mask        |
+  +--------------------+                  |------------------------|
+           ^                              | Interrupts timeout     |
+           |                              +------------------------+
+           |                                        ^  ^
+  Rclk-----+----------------------------------------+  |
+  APB3-------------------------------------------------+
+
+  This bindings describes the external Baikal-T1 PVT control interfaces
+  like MMIO registers space, interrupt request number and clocks source.
+  These are then used by the corresponding hwmon device driver to
+  implement the sysfs files-based access to the sensors functionality.
+
+properties:
+  compatible:
+    const: baikal,bt1-pvt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PVT reference clock
+      - description: APB3 interface clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: pclk
+
+  "#thermal-sensor-cells":
+    description: Baikal-T1 can be referenced as the CPU thermal-sensor
+    const: 0
+
+  baikal,pvt-temp-offset-millicelsius:
+    description: |
+      Temperature sensor trimming factor. It can be used to manually adjust the
+      temperature measurements within 7.130 degrees Celsius.
+    default: 0
+    minimum: 0
+    maximum: 7130
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    pvt@1f200000 {
+      compatible = "baikal,bt1-pvt";
+      reg = <0x1f200000 0x1000>;
+      #thermal-sensor-cells = <0>;
+
+      interrupts = <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>;
+
+      baikal,pvt-temp-offset-millicelsius = <1000>;
+
+      clocks = <&ccu_sys>, <&ccu_sys>;
+      clock-names = "ref", "pclk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
deleted file mode 100644
index ffb79ccf51ee..000000000000
--- a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform.  Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the hardware monitor
-portion of the driver.
-
-This binding must be part of the Lochnagar MFD binding:
-  [4] ../mfd/cirrus,lochnagar.txt
-
-Required properties:
-
-  - compatible : One of the following strings:
-                 "cirrus,lochnagar2-hwmon"
-
-Example:
-
-lochnagar-hwmon {
-	compatible = "cirrus,lochnagar2-hwmon";
-};
diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml
new file mode 100644
index 000000000000..cc00b97a7dac
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of various
+  application processor systems to provide a full evaluation platform.
+  Audio system topology, clocking and power can all be controlled through
+  the Lochnagar, allowing the device under test to be used in a variety of
+  possible use cases.
+
+  This binding document describes the binding for the hardware monitor
+  portion of the driver.
+
+  This binding must be part of the Lochnagar MFD binding:
+    [1] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar2-hwmon
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/hwmon/dps650ab.txt b/Documentation/devicetree/bindings/hwmon/dps650ab.txt
deleted file mode 100644
index 76780e795899..000000000000
--- a/Documentation/devicetree/bindings/hwmon/dps650ab.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-Bindings for Delta Electronics DPS-650-AB power supply
-
-Required properties:
-- compatible : "delta,dps650ab"
-- reg        : I2C address, one of 0x58, 0x59.
-
-Example:
-	dps650ab@58 {
-		    compatible = "delta,dps650ab";
-		    reg = <0x58>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
index 2becdcfdc840..f4cfa350f6a1 100644
--- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
@@ -12,7 +12,8 @@ Optional properties:
 - alarm-gpios: This pin going active indicates something is wrong with
   the fan, and a udev event will be fired.
 - #cooling-cells: If used as a cooling device, must be <2>
-  Also see: Documentation/devicetree/bindings/thermal/thermal.txt
+  Also see:
+  Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
   min and max states are derived from the speed-map of the fan.
 
 Note: At least one the "gpios" or "alarm-gpios" properties must be set.
diff --git a/Documentation/devicetree/bindings/hwmon/hih6130.txt b/Documentation/devicetree/bindings/hwmon/hih6130.txt
deleted file mode 100644
index 2c43837af4c2..000000000000
--- a/Documentation/devicetree/bindings/hwmon/hih6130.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Honeywell Humidicon HIH-6130 humidity/temperature sensor
---------------------------------------------------------
-
-Requires node properties:
-- compatible : "honeywell,hi6130"
-- reg : the I2C address of the device. This is 0x27.
-
-Example:
-	hih6130@27 {
-		compatible = "honeywell,hih6130";
-		reg = <0x27>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
deleted file mode 100644
index d9a2719f9243..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Device-tree bindings for IBM Common Form Factor Power Supply Versions 1 and 2
------------------------------------------------------------------------------
-
-Required properties:
- - compatible				: Must be one of the following:
-						"ibm,cffps1"
-						"ibm,cffps2"
-						or "ibm,cffps" if the system
-						must support any version of the
-						power supply
- - reg = < I2C bus address >;		: Address of the power supply on the
-					  I2C bus.
-
-Example:
-
-    i2c-bus@100 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        #interrupt-cells = <1>;
-        < more properties >
-
-        power-supply@68 {
-            compatible = "ibm,cffps1";
-            reg = <0x68>;
-        };
-    };
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
new file mode 100644
index 000000000000..3dbdc5af2804
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM On-Chip Controller (OCC) accessed from a service processor
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  The POWER processor On-Chip Controller (OCC) helps manage power and
+  thermals for the system. A service processor or baseboard management
+  controller can query the OCC for it's power and thermal data to report
+  through hwmon.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-occ-hwmon
+      - ibm,p10-occ-hwmon
+
+  ibm,no-poll-on-init:
+    description: This property describes whether or not the OCC should
+      be polled during driver initialization.
+    type: boolean
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    hwmon {
+        compatible = "ibm,p10-occ-hwmon";
+        ibm,no-poll-on-init;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt b/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt
index 5dc5d2e2573d..5dc5d2e2573d 100644
--- a/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt
+++ b/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt
diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
new file mode 100644
index 000000000000..e1ccbd30e0eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/hwmon/iio-hwmon.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ADC-attached Hardware Sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: >
+  Bindings for hardware monitoring devices connected to ADC controllers
+  supporting the Industrial I/O bindings.
+
+properties:
+  compatible:
+    const: iio-hwmon
+
+  io-channels:
+    minItems: 1
+    maxItems: 8 # Should be enough
+    description: >
+      List of phandles to ADC channels to read the monitoring values
+
+required:
+  - compatible
+  - io-channels
+
+additionalProperties: false
+
+examples:
+  - |
+      iio-hwmon {
+          compatible = "iio-hwmon";
+          io-channels = <&adc 1>, <&adc 2>;
+      };
diff --git a/Documentation/devicetree/bindings/hwmon/ina2xx.txt b/Documentation/devicetree/bindings/hwmon/ina2xx.txt
deleted file mode 100644
index 02af0d94e921..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ina2xx.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-ina2xx properties
-
-Required properties:
-- compatible: Must be one of the following:
-	- "ti,ina209" for ina209
-	- "ti,ina219" for ina219
-	- "ti,ina220" for ina220
-	- "ti,ina226" for ina226
-	- "ti,ina230" for ina230
-	- "ti,ina231" for ina231
-- reg: I2C address
-
-Optional properties:
-
-- shunt-resistor
-	Shunt resistor value in micro-Ohm
-
-Example:
-
-ina220@44 {
-	compatible = "ti,ina220";
-	reg = <0x44>;
-	shunt-resistor = <1000>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/jc42.txt b/Documentation/devicetree/bindings/hwmon/jc42.txt
deleted file mode 100644
index f569db58f64a..000000000000
--- a/Documentation/devicetree/bindings/hwmon/jc42.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Properties for Jedec JC-42.4 compatible temperature sensors
-
-Required properties:
-- compatible: May include a device-specific string consisting of the
-	      manufacturer and the name of the chip. A list of supported
-	      chip names follows.
-	      Must include "jedec,jc-42.4-temp" for any Jedec JC-42.4
-	      compatible temperature sensor.
-
-	      Supported chip names:
-		adi,adt7408
-		atmel,at30ts00
-		atmel,at30tse004
-		onnn,cat6095
-		onnn,cat34ts02
-		maxim,max6604
-		microchip,mcp9804
-		microchip,mcp9805
-		microchip,mcp9808
-		microchip,mcp98243
-		microchip,mcp98244
-		microchip,mcp9843
-		nxp,se97
-		nxp,se98
-		st,stts2002
-		st,stts2004
-		st,stts3000
-		st,stts424
-		st,stts424e
-		idt,tse2002
-		idt,tse2004
-		idt,ts3000
-		idt,ts3001
-
-- reg: I2C address
-
-Optional properties:
-- smbus-timeout-disable: When set, the smbus timeout function will be disabled.
-			 This is not supported on all chips.
-
-Example:
-
-temp-sensor@1a {
-	compatible = "jedec,jc-42.4-temp";
-	reg = <0x1a>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
new file mode 100644
index 000000000000..0e49b3901161
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/jedec,jc42.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Jedec JC-42.4 compatible temperature sensors
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+select:
+  properties:
+    compatible:
+      const: jedec,jc-42.4-temp
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - const: jedec,jc-42.4-temp
+      - items:
+          - enum:
+              - adi,adt7408
+              - atmel,at30ts00
+              - atmel,at30tse004
+              - idt,tse2002
+              - idt,tse2004
+              - idt,ts3000
+              - idt,ts3001
+              - maxim,max6604
+              - microchip,mcp9804
+              - microchip,mcp9805
+              - microchip,mcp9808
+              - microchip,mcp98243
+              - microchip,mcp98244
+              - microchip,mcp9843
+              - nxp,se97
+              - nxp,se97b
+              - nxp,se98
+              - onnn,cat6095
+              - onnn,cat34ts02
+              - st,stts2002
+              - st,stts2004
+              - st,stts3000
+              - st,stts424
+              - st,stts424e
+          - const: jedec,jc-42.4-temp
+
+  reg:
+    maxItems: 1
+
+  smbus-timeout-disable:
+    description: |
+      When set, the smbus timeout function will be disabled. This is not
+      supported on all chips.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temp-sensor@1a {
+            compatible = "jedec,jc-42.4-temp";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
new file mode 100644
index 000000000000..010333cb25c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware monitoring driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-fan
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
new file mode 100644
index 000000000000..b1a4c235376e
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lltc,ltc4151.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTC4151 High Voltage I2C Current and Voltage Monitor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: lltc,ltc4151
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt resistor value in micro-Ohms
+    default: 1000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@6e {
+            compatible = "lltc,ltc4151";
+            reg = <0x6e>;
+            shunt-resistor-micro-ohms = <1500>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/lm70.txt b/Documentation/devicetree/bindings/hwmon/lm70.txt
deleted file mode 100644
index ea417a0d32af..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm70.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* LM70/TMP121/LM71/LM74 thermometer.
-
-Required properties:
-- compatible: one of
-		"ti,lm70"
-		"ti,tmp121"
-		"ti,tmp122"
-		"ti,lm71"
-		"ti,lm74"
-
-See Documentation/devicetree/bindings/spi/spi-bus.txt for more required and
-optional properties.
-
-Example:
-
-spi_master {
-	temperature-sensor@0 {
-		compatible = "ti,lm70";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/hwmon/lm75.txt b/Documentation/devicetree/bindings/hwmon/lm75.txt
deleted file mode 100644
index 273616702c51..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm75.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-*LM75 hwmon sensor.
-
-Required properties:
-- compatible: manufacturer and chip name, one of
-		"adi,adt75",
-		"dallas,ds1775",
-		"dallas,ds75",
-		"dallas,ds7505",
-		"gmt,g751",
-		"national,lm75",
-		"national,lm75a",
-		"national,lm75b",
-		"maxim,max6625",
-		"maxim,max6626",
-		"maxim,max31725",
-		"maxim,max31726",
-		"maxim,mcp980x",
-		"nxp,pct2075",
-		"st,stds75",
-		"st,stlm75",
-		"microchip,tcn75",
-		"ti,tmp100",
-		"ti,tmp101",
-		"ti,tmp105",
-		"ti,tmp112",
-		"ti,tmp175",
-		"ti,tmp275",
-		"ti,tmp75",
-		"ti,tmp75b",
-		"ti,tmp75c",
-
-- reg: I2C bus address of the device
-
-Example:
-
-sensor@48 {
-	compatible = "st,stlm75";
-	reg = <0x48>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml
new file mode 100644
index 000000000000..8226e3b5d028
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lm75.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM75 hwmon sensor
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    enum:
+      - adi,adt75
+      - atmel,at30ts74
+      - dallas,ds1775
+      - dallas,ds75
+      - dallas,ds7505
+      - gmt,g751
+      - national,lm75
+      - national,lm75a
+      - national,lm75b
+      - maxim,max6625
+      - maxim,max6626
+      - maxim,max31725
+      - maxim,max31726
+      - maxim,mcp980x
+      - nxp,pct2075
+      - st,stds75
+      - st,stlm75
+      - microchip,tcn75
+      - ti,tmp1075
+      - ti,tmp100
+      - ti,tmp101
+      - ti,tmp105
+      - ti,tmp112
+      - ti,tmp175
+      - ti,tmp275
+      - ti,tmp75
+      - ti,tmp75b
+      - ti,tmp75c
+
+  reg:
+    maxItems: 1
+
+  vs-supply:
+    description: phandle to the regulator that provides the +VS supply
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@48 {
+        compatible = "st,stlm75";
+        reg = <0x48>;
+        vs-supply = <&vs>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt
deleted file mode 100644
index c76a7ac47c34..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm90.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* LM90 series thermometer.
-
-Required node properties:
-- compatible: manufacturer and chip name, one of
-		"adi,adm1032"
-		"adi,adt7461"
-		"adi,adt7461a"
-		"gmt,g781"
-		"national,lm90"
-		"national,lm86"
-		"national,lm89"
-		"national,lm99"
-		"dallas,max6646"
-		"dallas,max6647"
-		"dallas,max6649"
-		"dallas,max6657"
-		"dallas,max6658"
-		"dallas,max6659"
-		"dallas,max6680"
-		"dallas,max6681"
-		"dallas,max6695"
-		"dallas,max6696"
-		"onnn,nct1008"
-		"winbond,w83l771"
-		"nxp,sa56004"
-		"ti,tmp451"
-
-- reg: I2C bus address of the device
-
-- vcc-supply: vcc regulator for the supply voltage.
-
-Optional properties:
-- interrupts: Contains a single interrupt specifier which describes the
-              LM90 "-ALERT" pin output.
-              See interrupt-controller/interrupts.txt for the format.
-
-- #thermal-sensor-cells: should be set to 1. See thermal/thermal.txt for
-	      details. See <include/dt-bindings/thermal/lm90.h> for the
-	      definition of the local, remote and 2nd remote sensor index
-	      constants.
-
-Example LM90 node:
-
-temp-sensor {
-	compatible = "onnn,nct1008";
-	reg = <0x4c>;
-	vcc-supply = <&palmas_ldo6_reg>;
-	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
-	#thermal-sensor-cells = <1>;
-}
diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
index b428a70a7cc0..4e7f6215a453 100644
--- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt
+++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
@@ -2,20 +2,30 @@ ltc2978
 
 Required properties:
 - compatible: should contain one of:
+  * "lltc,ltc2972"
   * "lltc,ltc2974"
   * "lltc,ltc2975"
   * "lltc,ltc2977"
   * "lltc,ltc2978"
+  * "lltc,ltc2979"
   * "lltc,ltc2980"
   * "lltc,ltc3880"
   * "lltc,ltc3882"
   * "lltc,ltc3883"
+  * "lltc,ltc3884"
   * "lltc,ltc3886"
   * "lltc,ltc3887"
+  * "lltc,ltc3889"
+  * "lltc,ltc7880"
   * "lltc,ltm2987"
+  * "lltc,ltm4664"
   * "lltc,ltm4675"
   * "lltc,ltm4676"
+  * "lltc,ltm4677"
+  * "lltc,ltm4678"
+  * "lltc,ltm4680"
   * "lltc,ltm4686"
+  * "lltc,ltm4700"
 - reg: I2C slave address
 
 Optional properties:
@@ -25,13 +35,17 @@ Optional properties:
   standard binding for regulators; see regulator.txt.
 
 Valid names of regulators depend on number of supplies supported per device:
+  * ltc2972 vout0 - vout1
   * ltc2974, ltc2975 : vout0 - vout3
-  * ltc2977, ltc2980, ltm2987 : vout0 - vout7
+  * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
   * ltc2978 : vout0 - vout7
-  * ltc3880, ltc3882, ltc3886 : vout0 - vout1
+  * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
+  * ltc7880 : vout0 - vout1
   * ltc3883 : vout0
-  * ltm4676 : vout0 - vout1
-  * ltm4686 : vout0 - vout1
+  * ltm4664 : vout0 - vout1
+  * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1
+  * ltm4680, ltm4686 : vout0 - vout1
+  * ltm4700 : vout0 - vout1
 
 Example:
 ltc2978@5e {
diff --git a/Documentation/devicetree/bindings/hwmon/ltc4151.txt b/Documentation/devicetree/bindings/hwmon/ltc4151.txt
deleted file mode 100644
index d008a5ef525a..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ltc4151.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-LTC4151 High Voltage I2C Current and Voltage Monitor
-
-Required properties:
-- compatible: Must be "lltc,ltc4151"
-- reg: I2C address
-
-Optional properties:
-- shunt-resistor-micro-ohms
-	Shunt resistor value in micro-Ohms
-	Defaults to <1000> if unset.
-
-Example:
-
-ltc4151@6e {
-	compatible = "lltc,ltc4151";
-	reg = <0x6e>;
-	shunt-resistor-micro-ohms = <1500>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/max1619.txt b/Documentation/devicetree/bindings/hwmon/max1619.txt
deleted file mode 100644
index c70dbbe1e56f..000000000000
--- a/Documentation/devicetree/bindings/hwmon/max1619.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Bindings for MAX1619 Temperature Sensor
-
-Required properties:
-- compatible : "maxim,max1619"
-- reg        : I2C address, one of 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, or
-               0x4d, 0x4e
-
-Example:
-	temp@4c {
-		compatible = "maxim,max1619";
-		reg = <0x4c>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml
new file mode 100644
index 000000000000..93e86e3b4602
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/maxim,max20730.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim max20730
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  The MAX20730 is a fully integrated, highly efficient switching regulator
+  with PMBus for applications operating from 4.5V to 16V and requiring
+  up to 25A (max) load. This single-chip regulator provides extremely
+  compact, high efficiency power-delivery solutions with high-precision
+  output voltages and excellent transient response.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX20730.pdf
+    https://datasheets.maximintegrated.com/en/ds/MAX20734.pdf
+    https://datasheets.maximintegrated.com/en/ds/MAX20743.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max20730
+      - maxim,max20734
+      - maxim,max20743
+
+  reg:
+    maxItems: 1
+
+  vout-voltage-divider:
+    description: |
+      If voltage divider present at vout, the voltage at voltage sensor pin
+      will be scaled. The properties will convert the raw reading to a more
+      meaningful number if voltage divider present. It has two numbers,
+      the first number is the output resistor, the second number is the total
+      resistance. Therefore, the adjusted vout is equal to
+      Vout = Vout * output_resistance / total resistance.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      max20730@10 {
+        compatible = "maxim,max20730";
+        reg = <0x10>;
+        vout-voltage-divider = <1000 2000>; // vout would be scaled to 0.5
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/mcp3021.txt b/Documentation/devicetree/bindings/hwmon/mcp3021.txt
deleted file mode 100644
index 294318ba6914..000000000000
--- a/Documentation/devicetree/bindings/hwmon/mcp3021.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-mcp3021 properties
-
-Required properties:
-- compatible: Must be one of the following:
-	- "microchip,mcp3021" for mcp3021
-	- "microchip,mcp3221" for mcp3221
-- reg: I2C address
-
-Optional properties:
-
-- reference-voltage-microvolt
-	Reference voltage in microvolt (uV)
-
-Example:
-
-mcp3021@4d {
-	compatible = "microchip,mcp3021";
-	reg = <0x4d>;
-
-	reference-voltage-microvolt = <4500000>; /* 4.5 V */
-};
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml b/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml
new file mode 100644
index 000000000000..390dd6755ff5
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,lan966x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966x Hardware Monitor
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  Microchip LAN966x temperature monitor and fan controller
+
+properties:
+  compatible:
+    enum:
+      - microchip,lan9668-hwmon
+
+  reg:
+    items:
+      - description: PVT registers
+      - description: FAN registers
+
+  reg-names:
+    items:
+      - const: pvt
+      - const: fan
+
+  clocks:
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    hwmon: hwmon@e2010180 {
+        compatible = "microchip,lan9668-hwmon";
+        reg = <0xe2010180 0xc>,
+              <0xe20042a8 0xc>;
+        reg-names = "pvt", "fan";
+        clocks = <&sys_clk>;
+        #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml
new file mode 100644
index 000000000000..028d6e570131
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,mcp3021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP3021 A/D converter
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3021
+      - microchip,mcp3221
+
+  reg:
+    maxItems: 1
+
+  reference-voltage-microvolt:
+    description:
+      VDD supply power and reference voltage
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@4d {
+            compatible = "microchip,mcp3021";
+            reg = <0x4d>;
+
+            reference-voltage-microvolt = <4500000>; /* 4.5 V */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
new file mode 100644
index 000000000000..51e8619dbf3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,sparx5-temp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Temperature Monitor
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  Microchip Sparx5 embedded temperature monitor
+
+properties:
+  compatible:
+    enum:
+      - microchip,sparx5-temp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: System reference clock
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    tmon0: tmon@610508110 {
+        compatible = "microchip,sparx5-temp";
+        reg = <0x10508110 0xc>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&sys_clk>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
new file mode 100644
index 000000000000..d0d549749208
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Moortec Semiconductor MR75203 PVT Controller bindings
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+description: |
+  A Moortec PVT (Process, Voltage, Temperature) monitoring logic design can
+  include many different units.
+  Such a design will usually consists of several Moortec's embedded analog IPs,
+  and a single Moortec controller (mr75203) to configure and control the IPs.
+
+  Some of the Moortec's analog hard IPs that can be used in a design:
+  *) Temperature Sensor (TS) - used to monitor core temperature (e.g. mr74137).
+  *) Voltage Monitor (VM) - used to monitor voltage levels (e.g. mr74138).
+  *) Process Detector (PD) - used to assess silicon speed (e.g. mr74139).
+  *) Delay Chain - ring oscillator connected to the PD, used to measure IO
+     based transistors (e.g. mr76008 ring oscillator at 1.1V, mr76007 ring
+     oscillator at 1.8V).
+  *) Pre Scaler - provides divide-by-X scaling of input voltage, which can then
+     be presented for VM for measurement within its range (e.g. mr76006 -
+     divide by 2 pre-scaler).
+
+  TS, VM & PD also include a digital interface, which consists of configuration
+  inputs and measurement outputs.
+
+  Some of the units have number of series, each series can have slightly
+  different characteristics.
+
+  The mr75203 binding describes configuration for the controller unit, but also
+  for some of the analog IPs.
+
+properties:
+  compatible:
+    const: moortec,mr75203
+
+  reg:
+    items:
+      - description: PVT common registers
+      - description: PVT temprature sensor registers
+      - description: PVT process detector registers
+      - description: PVT voltage monitor registers
+
+  reg-names:
+    items:
+      - const: common
+      - const: ts
+      - const: pd
+      - const: vm
+
+  intel,vm-map:
+    description:
+      PVT controller has 5 VM (voltage monitor) sensors.
+      vm-map defines CPU core to VM instance mapping. A
+      value of 0xff means that VM sensor is unused.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 5
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  moortec,vm-active-channels:
+    description:
+      Defines the number of channels per VM that are actually used and are
+      connected to some input source.
+      Maximum number of items - number of VMs.
+      Maximum value of each item - number of channels.
+      Minimum value of each item - 0 (which means entire VM sensor is not used).
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  moortec,vm-pre-scaler-x2:
+    description:
+      Defines the channels that use a mr76006 pre-scaler to divide the input
+      source by 2.
+      The pre-scaler is used for input sources that exceed the VM input range.
+      The driver uses this information to present to the user with the actual
+      value of the voltage source.
+      For channels that are not listed, no pre-scaler is assumed.
+      Maximum number of items - total number of channels in all VMs.
+      Each channel should not appear more than once.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  moortec,ts-series:
+    description:
+      Definition of the temperature equation and coefficients that shall be
+      used to convert the digital output to value in milli-Celsius.
+    minimum: 5
+    maximum: 6
+    default: 5
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-g:
+    description:
+      G coefficient for temperature equation.
+      Default for series 5 = 60000
+      Default for series 6 = 57400
+    multipleOf: 1000
+    minimum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-h:
+    description:
+      H coefficient for temperature equation.
+      Default for series 5 = 200000
+      Default for series 6 = 249400
+    multipleOf: 1000
+    minimum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-cal5:
+    description:
+      cal5 coefficient for temperature equation.
+      Default for series 5 = 4094
+      Default for series 6 = 4096
+    minimum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-j:
+    description:
+      J coefficient for temperature equation.
+      Default for series 5 = -100
+      Default for series 6 = 0
+    multipleOf: 1000
+    maximum: 0
+    $ref: /schemas/types.yaml#/definitions/int32
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pvt: pvt@e0680000 {
+        compatible = "moortec,mr75203";
+        reg = <0xe0680000 0x80>,
+              <0xe0680080 0x180>,
+              <0xe0680200 0x200>,
+              <0xe0680400 0xc00>;
+        reg-names = "common", "ts", "pd", "vm";
+        intel,vm-map = [03 01 04 ff ff];
+        clocks = <&osc0>;
+        resets = <&rcu0 0x40 7>;
+        moortec,vm-active-channels = /bits/ 8 <0x10 0x05>;
+        moortec,vm-pre-scaler-x2 = /bits/ 8 <5 6 20>;
+        moortec,ts-coeff-g = <61400>;
+        moortec,ts-coeff-h = <253700>;
+        #thermal-sensor-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
new file mode 100644
index 000000000000..e1719839faf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/national,lm90.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM90 series thermometer
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1032
+      - adi,adt7461
+      - adi,adt7461a
+      - adi,adt7481
+      - dallas,max6646
+      - dallas,max6647
+      - dallas,max6649
+      - dallas,max6657
+      - dallas,max6658
+      - dallas,max6659
+      - dallas,max6680
+      - dallas,max6681
+      - dallas,max6695
+      - dallas,max6696
+      - gmt,g781
+      - national,lm86
+      - national,lm89
+      - national,lm90
+      - national,lm99
+      - nxp,sa56004
+      - onnn,nct1008
+      - ti,tmp451
+      - ti,tmp461
+      - winbond,w83l771
+
+
+  interrupts:
+    items:
+      - description: |
+          Single interrupt specifier which describes the LM90 "-ALERT" pin
+          output.
+
+  reg:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  vcc-supply:
+    description: phandle to the regulator that provides the +VCC supply
+
+  ti,extended-range-enable:
+    description: Set to enable extended range temperature.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^channel@([0-2])$":
+    type: object
+    description: Represents channels of the device and their specific configuration.
+
+    properties:
+      reg:
+        description: The channel number. 0 is local channel, 1-2 are remote channels.
+        items:
+          minimum: 0
+          maximum: 2
+
+      label:
+        description: A descriptive name for this channel, like "ambient" or "psu".
+
+      temperature-offset-millicelsius:
+        description: Temperature offset to be added to or subtracted from remote temperature measurements.
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,adt7461
+                - adi,adt7461a
+                - adi,adt7481
+                - ti,tmp451
+                - ti,tmp461
+    then:
+      properties:
+        ti,extended-range-enable: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dallas,max6646
+              - dallas,max6647
+              - dallas,max6649
+              - dallas,max6657
+              - dallas,max6658
+              - dallas,max6659
+              - dallas,max6695
+              - dallas,max6696
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adt7461
+              - adi,adt7461a
+              - adi,adt7481
+              - onnn,nct1008
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127750
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1032
+              - dallas,max6680
+              - dallas,max6681
+              - gmt,g781
+              - national,lm86
+              - national,lm89
+              - national,lm90
+              - national,lm99
+              - nxp,sa56004
+              - winbond,w83l771
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127875
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp451
+              - ti,tmp461
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127937
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@4c {
+            compatible = "onnn,nct1008";
+            reg = <0x4c>;
+            vcc-supply = <&palmas_ldo6_reg>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            #thermal-sensor-cells = <1>;
+        };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "adi,adt7481";
+        reg = <0x4c>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0x0>;
+          label = "local";
+        };
+
+        channel@1 {
+          reg = <0x1>;
+          label = "front";
+          temperature-offset-millicelsius = <4000>;
+        };
+
+        channel@2 {
+          reg = <0x2>;
+          label = "back";
+          temperature-offset-millicelsius = <750>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
new file mode 100644
index 000000000000..3d3b139a91a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+---
+$id: http://devicetree.org/schemas/hwmon/ntc-thermistor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NTC thermistor temperature sensors
+
+maintainers:
+  - Naveen Krishna Chatradhi <ch.naveen@samsung.com>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Thermistors with negative temperature coefficient (NTC) are resistors that
+  vary in resistance in an often non-linear way in relation to temperature.
+  The negative temperature coefficient means that the resistance decreases
+  as the temperature rises. Since the relationship between resistance and
+  temperature is non-linear, software drivers most often need to use a look
+  up table and interpolation to get from resistance to temperature.
+
+  When used in practice, a thermistor is often connected between ground, a
+  pull-up resistor or/and a pull-down resistor and a fixed voltage like this:
+
+      + e.g. 5V = pull-up voltage (puv)
+      |
+     +-+
+     | |
+     | | Pull-up resistor
+     | | (puo)
+     +-+
+      |-------------------------o
+     +-+ |                      ^
+     | |/                       |
+     | /                        |
+     |/| Thermistor             | Measured voltage (mv)
+     / |                        | "connected ground"
+    /| |                        |
+     +-+                        |
+      |-------------------------o
+     +-+                        ^
+     | |                        |
+     | | Pull-down resistor     | Measured voltage (mv)
+     | | (pdo)                  | "connected positive"
+     +-+                        |
+      |                         |
+      |                         v
+      + GND                     GND
+
+  The arrangements of where we measure the voltage over the thermistor are
+  called "connected ground" and "connected positive" and shall be understood as
+  the cases when either pull-up or pull-down resistance is zero.
+
+  If the pull-up resistance is 0 one end of the thermistor is connected to the
+  positive voltage and we get the thermistor on top of a pull-down resistor
+  and we take the measure between the thermistor and the pull-down resistor.
+
+  Conversely if the pull-down resistance is zero, one end of the thermistor is
+  connected to ground and we get the thermistor under the pull-up resistor
+  and we take the measure between the pull-up resistor and the thermistor.
+
+  We can use both pull-up and pull-down resistors at the same time, and then
+  the figure illustrates where the voltage will be measured for the "connected
+  ground" and "connected positive" cases.
+
+properties:
+  $nodename:
+    pattern: "^thermistor(.*)?$"
+
+  compatible:
+    oneOf:
+      - const: epcos,b57330v2103
+      - const: epcos,b57891s0103
+      - const: murata,ncp15wb473
+      - const: murata,ncp18wb473
+      - const: murata,ncp21wb473
+      - const: murata,ncp03wb473
+      - const: murata,ncp15wl333
+      - const: murata,ncp03wf104
+      - const: murata,ncp15xh103
+      - const: samsung,1404-001221
+      # Deprecated "ntp," compatible strings
+      - const: ntc,ncp15wb473
+        deprecated: true
+      - const: ntc,ncp18wb473
+        deprecated: true
+      - const: ntc,ncp21wb473
+        deprecated: true
+      - const: ntc,ncp03wb473
+        deprecated: true
+      - const: ntc,ncp15wl333
+        deprecated: true
+
+  "#thermal-sensor-cells":
+    description: Thermal sensor cells if used for thermal sensoring.
+    const: 0
+
+  pullup-uv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Pull-up voltage in micro volts. Must always be specified.
+
+  pullup-ohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Pull-up resistance in ohms. Must always be specified, even
+      if zero.
+
+  pulldown-ohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Pull-down resistance in ohms. Must always be specified, even
+      if zero.
+
+  connected-positive:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Indicates how the thermistor is connected in series with
+      a pull-up and/or a pull-down resistor. See the description above for
+      an illustration. If this flag is NOT specified, the thermistor is assumed
+      to be connected-ground, which usually means a pull-down resistance of
+      zero but complex arrangements are possible.
+
+  # See /schemas/iio/adc/adc.yaml
+  io-channels:
+    maxItems: 1
+    description: IIO ADC channel to read the voltage over the resistor. Must
+      always be specified.
+
+required:
+  - compatible
+  - pullup-uv
+  - pullup-ohm
+  - pulldown-ohm
+  - io-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    thermistor0 {
+      compatible = "murata,ncp18wb473";
+      io-channels = <&gpadc 0x06>;
+      pullup-uv = <1800000>;
+      pullup-ohm = <220000>;
+      pulldown-ohm = <0>;
+      #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
deleted file mode 100644
index 37f18d684f6a..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-NTC Thermistor hwmon sensors
--------------------------------
-
-Requires node properties:
-- "compatible" value : one of
-	"epcos,b57330v2103"
-	"epcos,b57891s0103"
-	"murata,ncp15wb473"
-	"murata,ncp18wb473"
-	"murata,ncp21wb473"
-	"murata,ncp03wb473"
-	"murata,ncp15wl333"
-	"murata,ncp03wf104"
-	"murata,ncp15xh103"
-
-/* Usage of vendor name "ntc" is deprecated */
-<DEPRECATED>	"ntc,ncp15wb473"
-<DEPRECATED>	"ntc,ncp18wb473"
-<DEPRECATED>	"ntc,ncp21wb473"
-<DEPRECATED>	"ntc,ncp03wb473"
-<DEPRECATED>	"ntc,ncp15wl333"
-
-- "pullup-uv"	Pull up voltage in micro volts
-- "pullup-ohm"	Pull up resistor value in ohms
-- "pulldown-ohm" Pull down resistor value in ohms
-- "connected-positive" Always ON, If not specified.
-		Status change is possible.
-- "io-channels"	Channel node of ADC to be used for
-		conversion.
-
-Optional node properties:
-- "#thermal-sensor-cells" Used to expose itself to thermal fw.
-
-Read more about iio bindings at
-	Documentation/devicetree/bindings/iio/iio-bindings.txt
-
-Example:
-	ncp15wb473@0 {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;
-		pullup-ohm = <47000>;
-		pulldown-ohm = <0>;
-		io-channels = <&adc 3>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
new file mode 100644
index 000000000000..358b262431fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/nuvoton,nct6775.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NCT6775 and compatible Super I/O chips
+
+maintainers:
+  - Zev Weiss <zev@bewilderbeest.net>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nct6106
+      - nuvoton,nct6116
+      - nuvoton,nct6775
+      - nuvoton,nct6776
+      - nuvoton,nct6779
+      - nuvoton,nct6791
+      - nuvoton,nct6792
+      - nuvoton,nct6793
+      - nuvoton,nct6795
+      - nuvoton,nct6796
+      - nuvoton,nct6797
+      - nuvoton,nct6798
+
+  reg:
+    maxItems: 1
+
+  nuvoton,tsi-channel-mask:
+    description:
+      Bitmask indicating which TSI temperature sensor channels are
+      active.  LSB is TSI0, bit 1 is TSI1, etc.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0xff
+    default: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        superio@4d {
+            compatible = "nuvoton,nct6779";
+            reg = <0x4d>;
+            nuvoton,tsi-channel-mask = <0x03>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
new file mode 100644
index 000000000000..2f0620ecccc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/nuvoton,nct7802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NCT7802Y Hardware Monitoring IC
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  The NCT7802Y is a hardware monitor IC which supports one on-die and up to
+  5 remote temperature sensors with SMBus interface.
+
+  Datasheets:
+    https://www.nuvoton.com/export/resource-files/Nuvoton_NCT7802Y_Datasheet_V12.pdf
+
+additionalProperties: false
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nct7802
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^channel@[0-3]$":
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        items:
+          - enum:
+              - 0    # Local Temperature Sensor ("LTD")
+              - 1    # Remote Temperature Sensor or Voltage Sensor 1 ("RTD1")
+              - 2    # Remote Temperature Sensor or Voltage Sensor 2 ("RTD2")
+              - 3    # Remote Temperature Sensor or Voltage Sensor 3 ("RTD3")
+
+      sensor-type:
+        items:
+          - enum:
+              - temperature
+              - voltage
+
+      temperature-mode:
+        items:
+          - enum:
+              - thermistor
+              - thermal-diode
+
+    required:
+      - reg
+
+    allOf:
+      # For channels RTD1, RTD2 and RTD3, require sensor-type to be set.
+      # Otherwise (for all other channels), do not allow temperature-mode to be
+      # set.
+      - if:
+          properties:
+            reg:
+              items:
+                - enum:
+                    - 1
+                    - 2
+                    - 3
+        then:
+          required:
+            - sensor-type
+        else:
+          not:
+            required:
+              - sensor-type
+
+      # For channels RTD1 and RTD2 and if sensor-type is "temperature", require
+      # temperature-mode to be set. Otherwise (for all other channels or
+      # sensor-type settings), do not allow temperature-mode to be set
+      - if:
+          properties:
+            reg:
+              items:
+                - enum:
+                    - 1
+                    - 2
+            sensor-type:
+              items:
+                - enum:
+                    - temperature
+        then:
+          required:
+            - temperature-mode
+        else:
+          not:
+            required:
+              - temperature-mode
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nct7802@28 {
+            compatible = "nuvoton,nct7802";
+            reg = <0x28>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 { /* LTD */
+              reg = <0>;
+            };
+
+            channel@1 { /* RTD1 */
+              reg = <1>;
+              sensor-type = "voltage";
+            };
+
+            channel@2 { /* RTD2 */
+              reg = <2>;
+              sensor-type = "temperature";
+              temperature-mode = "thermal-diode";
+            };
+
+            channel@3 { /* RTD3 */
+              reg = <3>;
+              sensor-type = "temperature";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
new file mode 100644
index 000000000000..da8292bc32f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/ti,lm25066.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: National Semiconductor/Texas Instruments LM250x6/LM506x power-management ICs
+
+maintainers:
+  - Zev Weiss <zev@bewilderbeest.net>
+
+description: |
+  The LM25066 family of power-management ICs (a.k.a. hot-swap
+  controllers or eFuses in various contexts) are PMBus devices that
+  offer temperature, current, voltage, and power monitoring.
+
+  Datasheet: https://www.ti.com/lit/ds/symlink/lm25066.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lm25056
+      - ti,lm25066
+      - ti,lm5064
+      - ti,lm5066
+      - ti,lm5066i
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt (sense) resistor value in micro-Ohms
+    default: 1000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@40 {
+            compatible = "ti,lm25066";
+            reg = <0x40>;
+            shunt-resistor-micro-ohms = <675>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
index 5d42e1304202..e8feee38c76c 100644
--- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
@@ -32,6 +32,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
index 41b76762953a..4509e688623a 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
@@ -8,15 +8,16 @@ Required properties:
 
 Optional properties:
 - fan-supply		: phandle to the regulator that provides power to the fan
-- interrupts		: This contains a single interrupt specifier which
-			  describes the tachometer output of the fan as an
-			  interrupt source. The output signal must generate a
-			  defined number of interrupts per fan revolution, which
-			  require that it must be self resetting edge interrupts.
-			  See interrupt-controller/interrupts.txt for the format.
-- pulses-per-revolution : define the tachometer pulses per fan revolution as
-			  an integer (default is 2 interrupts per revolution).
-			  The value must be greater than zero.
+- interrupts		: This contains an interrupt specifier for each fan
+			  tachometer output connected to an interrupt source.
+			  The output signal must generate a defined number of
+			  interrupts per fan revolution, which require that
+			  it must be self resetting edge interrupts. See
+			  interrupt-controller/interrupts.txt for the format.
+- pulses-per-revolution : define the number of pulses per fan revolution for
+			  each tachometer input as an integer (default is 2
+			  interrupts per revolution). The value must be
+			  greater than zero.
 
 Example:
 	fan0: pwm-fan {
@@ -55,3 +56,12 @@ Example 2:
 		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 		pulses-per-revolution = <2>;
 	};
+
+Example 3:
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm1 0 25000 0>;
+		interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>,
+			<&gpio2 5 IRQ_TYPE_EDGE_FALLING>;
+		pulses-per-revolution = <2>, <1>;
+	};
diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml
new file mode 100644
index 000000000000..80df7182ea28
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sensirion,sht15.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SHT15 humidity and temperature sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: sensirion,sht15
+
+  clk-gpios:
+    maxItems: 1
+
+  data-gpios:
+    maxItems: 1
+
+  vcc-supply:
+    description: regulator that drives the VCC pin
+
+required:
+  - compatible
+  - clk-gpios
+  - data-gpios
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    sensor {
+        compatible = "sensirion,sht15";
+        clk-gpios = <&gpio4 12 0>;
+        data-gpios = <&gpio4 13 0>;
+        vcc-supply = <&reg_sht15>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_sensor>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
new file mode 100644
index 000000000000..159238efa9ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SHTC1 Humidity and Temperature Sensor IC
+
+maintainers:
+  - Christopher Ruehl chris.ruehl@gtsys.com.hk
+
+description: |
+  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors
+  designed especially for battery-driven high-volume consumer electronics
+  applications.
+  For further information refere to Documentation/hwmon/shtc1.rst
+
+  This binding document describes the binding for the hardware monitor
+  portion of the driver.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,shtc1
+      - sensirion,shtw1
+      - sensirion,shtc3
+
+  reg:
+    const: 0x70
+
+  sensirion,blocking-io:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, the driver holds the i2c bus until the measurement is finished.
+
+  sensirion,low-precision:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, the sensor acquires data with low precision (not recommended).
+      The driver acquires data with high precision by default.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clock-frequency = <400000>;
+
+      shtc3@70 {
+        compatible = "sensirion,shtc3";
+        reg = <0x70>;
+        sensirion,blocking-io;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/sht15.txt b/Documentation/devicetree/bindings/hwmon/sht15.txt
deleted file mode 100644
index 6a80277cc426..000000000000
--- a/Documentation/devicetree/bindings/hwmon/sht15.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Sensirion SHT15 Humidity and Temperature Sensor
-
-Required properties:
-
- - "compatible": must be "sensirion,sht15".
- - "data-gpios": GPIO connected to the data line.
- - "clk-gpios": GPIO connected to the clock line.
- - "vcc-supply": regulator that drives the VCC pin.
-
-Example:
-
-	sensor {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sensor>;
-		compatible = "sensirion,sht15";
-		clk-gpios = <&gpio4 12 0>;
-		data-gpios = <&gpio4 13 0>;
-		vcc-supply = <&reg_sht15>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
new file mode 100644
index 000000000000..926be9a29044
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,ads7828.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS7828/ADS7830 Analog to Digital Converter (ADC)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The ADS7828 is 12-Bit, 8-Channel Sampling Analog to Digital Converter (ADC)
+  with an I2C interface.
+
+  Datasheets:
+    https://www.ti.com/product/ADS7828
+
+properties:
+  compatible:
+    enum:
+      - ti,ads7828
+      - ti,ads7830
+
+  reg:
+    maxItems: 1
+
+  ti,differential-input:
+    description:
+      Set to use the device in differential mode.
+    type: boolean
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exists the
+      internal reference will be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@48 {
+            compatible = "ti,ads7828";
+            reg = <0x48>;
+            vref-supply = <&vref>;
+            ti,differential-input;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
new file mode 100644
index 000000000000..47af97bb4ced
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,ina2xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments INA209 family of power/voltage monitors
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The INA209 is a high-side current shunt and power monitor with
+  an I2C interface.
+
+  Datasheets:
+    https://www.ti.com/product/INA209
+
+properties:
+  compatible:
+    enum:
+      - ti,ina209
+      - ti,ina219
+      - ti,ina220
+      - ti,ina226
+      - ti,ina230
+      - ti,ina231
+      - ti,ina238
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor:
+    description:
+      Shunt resistor value in micro-Ohm.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,shunt-gain:
+    description: |
+      Programmable gain divisor for the shunt voltage accuracy and range. This
+      property only applies to devices that have configurable PGA/ADCRANGE. The
+      gain value is used configure the gain and to convert the shunt voltage,
+      current and power register values when reading measurements from the
+      device.
+
+      For devices that have a configurable PGA (e.g. INA209, INA219, INA220),
+      the gain value maps directly with the PG bits of the config register.
+
+      For devices that have ADCRANGE configuration (e.g. INA238) a shunt-gain
+      value of 1 maps to ADCRANGE=1 where no gain divisor is applied to the
+      shunt voltage, and a value of 4 maps to ADCRANGE=0 such that a wider
+      voltage range is used.
+
+      The default value is device dependent, and is defined by the reset value
+      of PGA/ADCRANGE in the respective configuration registers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-sensor@44 {
+            compatible = "ti,ina220";
+            reg = <0x44>;
+            shunt-resistor = <1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
new file mode 100644
index 000000000000..c5a889e3e27b
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP102 temperature sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp102
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@48 {
+            compatible = "ti,tmp102";
+            reg = <0x48>;
+            interrupt-parent = <&gpio7>;
+            interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+            #thermal-sensor-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml
new file mode 100644
index 000000000000..dcbc6fbc3b48
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp108.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP108 temperature sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp108
+
+  interrupts:
+    items:
+      - description: alert interrupt
+
+  reg:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@48 {
+            compatible = "ti,tmp108";
+            reg = <0x48>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&tmp_alrt>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
new file mode 100644
index 000000000000..0e8ddf0ad789
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp401.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP401, TPM411 and TMP43x temperature sensor
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  ±1°C Remote and Local temperature sensor
+
+  Datasheets:
+  https://www.ti.com/lit/ds/symlink/tmp401.pdf
+  https://www.ti.com/lit/ds/symlink/tmp411.pdf
+  https://www.ti.com/lit/ds/symlink/tmp431.pdf
+  https://www.ti.com/lit/ds/symlink/tmp435.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp401
+      - ti,tmp411
+      - ti,tmp431
+      - ti,tmp432
+      - ti,tmp435
+
+  reg:
+    maxItems: 1
+
+  ti,extended-range-enable:
+    description:
+      When set, this sensor measures over extended temperature range.
+    type: boolean
+
+  ti,n-factor:
+    description:
+      value to be used for converting remote channel measurements to
+      temperature.
+    $ref: /schemas/types.yaml#/definitions/int32
+    minimum: -128
+    maximum: 127
+
+  ti,beta-compensation:
+    description:
+      value to select beta correction range.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp401
+    then:
+      properties:
+        ti,n-factor: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp401
+              - ti,tmp411
+    then:
+      properties:
+        ti,beta-compensation: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp401";
+        reg = <0x4c>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp431";
+        reg = <0x4c>;
+        ti,extended-range-enable;
+        ti,n-factor = <0x3b>;
+        ti,beta-compensation = <0x7>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
new file mode 100644
index 000000000000..a6f1fa75a67c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp421.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP42x/TMP44x temperature sensor
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  ±1°C Remote and Local temperature sensor
+  https://www.ti.com/lit/ds/symlink/tmp422.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp421
+      - ti,tmp422
+      - ti,tmp423
+      - ti,tmp441
+      - ti,tmp442
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@([0-3])$":
+    type: object
+    description: |
+      Represents channels of the device and their specific configuration.
+
+    properties:
+      reg:
+        description: |
+          The channel number. 0 is local channel, 1-3 are remote channels
+        items:
+          minimum: 0
+          maximum: 3
+
+      label:
+        description: |
+          A descriptive name for this channel, like "ambient" or "psu".
+
+      ti,n-factor:
+        description: |
+          The value (two's complement) to be programmed in the channel specific N correction register.
+          For remote channels only.
+        $ref: /schemas/types.yaml#/definitions/int32
+        minimum: -128
+        maximum: 127
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp422";
+        reg = <0x4c>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp422";
+        reg = <0x4c>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0x0>;
+          ti,n-factor = <0x1>;
+          label = "local";
+        };
+
+        channel@1 {
+          reg = <0x1>;
+          ti,n-factor = <0x0>;
+          label = "somelabel";
+        };
+
+        channel@2 {
+          reg = <0x2>;
+          status = "disabled";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
new file mode 100644
index 000000000000..e7493e25a7d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp464.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP464 and TMP468 temperature sensors
+
+maintainers:
+  - Agathe Porte <agathe.porte@nokia.com>
+
+description: |
+  ±0.0625°C Remote and Local temperature sensor
+  https://www.ti.com/lit/ds/symlink/tmp464.pdf
+  https://www.ti.com/lit/ds/symlink/tmp468.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp464
+      - ti,tmp468
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@([0-8])$":
+    type: object
+    description: |
+      Represents channels of the device and their specific configuration.
+
+    properties:
+      reg:
+        description: |
+          The channel number. 0 is local channel, 1-8 are remote channels.
+        items:
+          minimum: 0
+          maximum: 8
+
+      label:
+        description: |
+          A descriptive name for this channel, like "ambient" or "psu".
+
+      ti,n-factor:
+        description: |
+          The value (two's complement) to be programmed in the channel specific N correction register.
+          For remote channels only.
+        $ref: /schemas/types.yaml#/definitions/int32
+        minimum: -128
+        maximum: 127
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4b {
+        compatible = "ti,tmp464";
+        reg = <0x4b>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4b {
+        compatible = "ti,tmp464";
+        reg = <0x4b>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0x0>;
+          label = "local";
+        };
+
+        channel@1 {
+          reg = <0x1>;
+          ti,n-factor = <(-10)>;
+          label = "external";
+        };
+
+        channel@2 {
+          reg = <0x2>;
+          ti,n-factor = <0x10>;
+          label = "somelabel";
+        };
+
+        channel@3 {
+          reg = <0x3>;
+          status = "disabled";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index 168235ad5d81..1502b22c77cc 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -18,8 +18,8 @@ description: |
   consumption.
 
   Datasheets:
-  http://www.ti.com/lit/gpn/tmp513
-  http://www.ti.com/lit/gpn/tmp512
+  https://www.ti.com/lit/gpn/tmp513
+  https://www.ti.com/lit/gpn/tmp512
 
 
 properties:
@@ -45,16 +45,13 @@ properties:
       The gain value for the PGA function. This is 8, 4, 2 or 1.
       The PGA gain affect the shunt voltage range.
       The range will be equal to: pga-gain * 40mV
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 2, 4, 8]
     default: 8
 
   ti,bus-range-microvolt:
     description: |
       This is the operating range of the bus voltage in microvolt
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     enum: [16000000, 32000000]
     default: 32000000
 
@@ -63,19 +60,20 @@ properties:
       Array of three(TMP513) or two(TMP512) n-Factor value for each remote
       temperature channel.
       See datasheet Table 11 for n-Factor range list and value interpretation.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint32-array
-      - minItems: 2
-        maxItems: 3
-        items:
-          default: 0x00
-          minimum: 0x00
-          maximum: 0xFF
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 3
+    items:
+      default: 0x00
+      minimum: 0x00
+      maximum: 0xFF
 
 required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
new file mode 100644
index 000000000000..3bc8e73dfbf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,tps23861.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS23861 PoE PSE
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  The TPS23861 is a IEEE 802.3at Quad Port Power-over-Ethernet PSE Controller.
+
+  Datasheets:
+  https://www.ti.com/lit/gpn/tps23861
+
+
+properties:
+  compatible:
+    enum:
+      - ti,tps23861
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description: The value of curent sense resistor in microohms.
+    default: 255000
+    minimum: 250000
+    maximum: 255000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          tps23861@30 {
+              compatible = "ti,tps23861";
+              reg = <0x30>;
+              shunt-resistor-micro-ohms = <255000>;
+          };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/tmp108.txt b/Documentation/devicetree/bindings/hwmon/tmp108.txt
deleted file mode 100644
index 54d4beed4ee5..000000000000
--- a/Documentation/devicetree/bindings/hwmon/tmp108.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-TMP108 temperature sensor
--------------------------
-
-This device supports I2C only.
-
-Requires node properties:
-- compatible : "ti,tmp108"
-- reg : the I2C address of the device. This is 0x48, 0x49, 0x4a, or 0x4b.
-
-Optional properties:
-- interrupts: Reference to the TMP108 alert interrupt.
-- #thermal-sensor-cells: should be set to 0.
-
-Example:
-	tmp108@48 {
-		compatible = "ti,tmp108";
-		reg = <0x48>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/vexpress.txt b/Documentation/devicetree/bindings/hwmon/vexpress.txt
index 9c27ed694bbb..4a4df4ffc460 100644
--- a/Documentation/devicetree/bindings/hwmon/vexpress.txt
+++ b/Documentation/devicetree/bindings/hwmon/vexpress.txt
@@ -9,7 +9,7 @@ Requires node properties:
 	"arm,vexpress-power"
 	"arm,vexpress-energy"
 - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
-  (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+  (see Documentation/devicetree/bindings/arm/vexpress-config.yaml
   for more details)
 
 Optional node properties:
diff --git a/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml b/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml
new file mode 100644
index 000000000000..31ce77a4b087
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/winbond,w83781d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Winbond W83781 and compatible hardware monitor IC
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - winbond,w83781d
+      - winbond,w83781g
+      - winbond,w83782d
+      - winbond,w83783s
+      - asus,as99127f
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@28 {
+            compatible = "winbond,w83781d";
+            reg = <0x28>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
index 6097e8ac46c1..5a799246a373 100644
--- a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
+++ b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/allwinner,sun6i-a31-p2wi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface) Device Tree Bindings
+title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -55,7 +55,7 @@ examples:
         #size-cells = <0>;
 
         axp221: pmic@68 {
-            compatible = "x-powers,axp221";
+            /* compatible = "x-powers,axp221"; */
             reg = <0x68>;
         };
     };
diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
index 49cad273c8e5..199a354ccb97 100644
--- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson I2C Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Beniamino Galvani <b.galvani@gmail.com>
 
 allOf:
@@ -36,6 +36,8 @@ required:
   - interrupts
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     i2c@c8100500 {
diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
new file mode 100644
index 000000000000..4ac61fec90e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/apple,i2c.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Apple/PASemi I2C controller
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description: |
+  Apple SoCs such as the M1 come with a I2C controller based on the one found
+  in machines with P. A. Semi's PWRficient processors.
+  The bus is used to communicate with e.g. USB PD chips or the speaker
+  amp.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-i2c
+          - apple,t6000-i2c
+      - const: apple,i2c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: I2C bus reference clock
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      Desired I2C bus clock frequency in Hz. If not specified, 100 kHz will be
+      used. This frequency is generated by dividing the reference clock.
+      Allowed values are between ref_clk/(16*4) and ref_clk/(16*255).
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@35010000 {
+      compatible = "apple,t8103-i2c", "apple,i2c";
+      reg = <0x35010000 0x4000>;
+      interrupt-parent = <&aic>;
+      interrupts = <0 627 4>;
+      clocks = <&ref_clk>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
new file mode 100644
index 000000000000..e58465d1b0c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/arm,i2c-versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C Controller on ARM Ltd development platforms
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: arm,versatile-i2c
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+...
+
diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
new file mode 100644
index 000000000000..869b4d633353
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs
+
+maintainers:
+  - Rayn Chen <rayn_chen@aspeedtech.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-i2c-bus
+      - aspeed,ast2500-i2c-bus
+      - aspeed,ast2600-i2c-bus
+
+  reg:
+    minItems: 1
+    items:
+      - description: address offset and range of bus
+      - description: address offset and range of bus buffer
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      root clock of bus, should reference the APB
+      clock in the second cell
+
+  resets:
+    maxItems: 1
+
+  bus-frequency:
+    minimum: 500
+    maximum: 4000000
+    default: 100000
+    description: frequency of the bus clock in Hz defaults to 100 kHz when not
+      specified
+
+  multi-master:
+    type: boolean
+    description:
+      states that there is another master active on this bus
+
+required:
+  - reg
+  - compatible
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    i2c0: i2c-bus@40 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "aspeed,ast2500-i2c-bus";
+      reg = <0x40 0x40>;
+      clocks = <&syscon ASPEED_CLK_APB>;
+      resets = <&syscon ASPEED_RESET_I2C>;
+      bus-frequency = <100000>;
+      interrupts = <0>;
+      interrupt-parent = <&i2c_ic>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
new file mode 100644
index 000000000000..ea2303c0e143
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C for Atmel/Microchip platforms
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91rm9200-i2c
+              - atmel,at91sam9261-i2c
+              - atmel,at91sam9260-i2c
+              - atmel,at91sam9g20-i2c
+              - atmel,at91sam9g10-i2c
+              - atmel,at91sam9x5-i2c
+              - atmel,sama5d4-i2c
+              - atmel,sama5d2-i2c
+              - microchip,sam9x60-i2c
+      - items:
+          - const: microchip,sama7g5-i2c
+          - const: microchip,sam9x60-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    items:
+      - description: TX DMA Channel Specifier
+      - description: RX DMA Channel Specifier
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  atmel,fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum number of data the RX and TX FIFOs can store for
+      FIFO capable I2C controllers.
+
+  scl-gpios: true
+
+  sda-gpios: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+
+allOf:
+  - $ref: "i2c-controller.yaml"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,sama5d4-i2c
+              - atmel,sama5d2-i2c
+              - microchip,sam9x60-i2c
+              - microchip,sama7g5-i2c
+    then:
+      properties:
+        i2c-sda-hold-time-ns:
+          description:
+            TWD hold time
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c0: i2c@fff84000 {
+        compatible = "atmel,at91sam9g20-i2c";
+        reg = <0xfff84000 0x100>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&twi0_clk>;
+        clock-frequency = <400000>;
+
+        eeprom@50 {
+            compatible = "atmel,24c512";
+            reg = <0x50>;
+            pagesize = <128>;
+        };
+    };
+
+    i2c1: i2c@f8034600 {
+        compatible = "atmel,sama5d2-i2c";
+        reg = <0xf8034600 0x100>;
+        interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+            AT91_XDMAC_DT_PERID(11)>,
+               <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+            AT91_XDMAC_DT_PERID(12)>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&flx0>;
+        atmel,fifo-size = <16>;
+        i2c-sda-hold-time-ns = <336>;
+        pinctrl-names = "default", "gpio";
+        pinctrl-0 = <&pinctrl_i2c0>;
+        pinctrl-1 = <&pinctrl_i2c0_gpio>;
+        sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+        scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+        eeprom@54 {
+            compatible = "atmel,24c02";
+            reg = <0x54>;
+            pagesize = <16>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
deleted file mode 100644
index c9a6587fe4bb..000000000000
--- a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Broadcom BCM2835 I2C controller
-
-Required properties:
-- compatible : Should be one of:
-	"brcm,bcm2711-i2c"
-	"brcm,bcm2835-i2c"
-- reg: Should contain register location and length.
-- interrupts: Should contain interrupt.
-- clocks : The clock feeding the I2C controller.
-
-Recommended properties:
-- clock-frequency : desired I2C bus clock frequency in Hz.
-
-Example:
-
-i2c@20205000 {
-	compatible = "brcm,bcm2835-i2c";
-	reg = <0x7e205000 0x1000>;
-	interrupts = <2 21>;
-	clocks = <&clk_i2c>;
-	clock-frequency = <100000>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml
new file mode 100644
index 000000000000..8256490a7af2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,bcm2835-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 I2C controller
+
+maintainers:
+  - Stephen Warren <swarren@wwwdotorg.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - brcm,bcm2835-i2c
+      - items:
+          - const: brcm,bcm2711-i2c
+          - const: brcm,bcm2835-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@7e205000 {
+        compatible = "brcm,bcm2835-i2c";
+        reg = <0x7e205000 0x1000>;
+        interrupts = <2 21>;
+        clocks = <&clk_i2c>;
+        clock-frequency = <100000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
new file mode 100644
index 000000000000..7070c04469ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,brcmstb-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB BSC IIC Master Controller
+
+maintainers:
+  - Kamal Dasu <kdasu.kdev@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-hdmi-i2c
+      - brcm,brcmstb-i2c
+      - brcm,brcmper-i2c
+
+  reg:
+    minItems: 1
+    items:
+      - description: BSC register range
+      - description: Auto-I2C register range
+
+  reg-names:
+    items:
+      - const: bsc
+      - const: auto-i2c
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  clock-frequency:
+    enum:
+      - 46875
+      - 50000
+      - 93750
+      - 97500
+      - 187500
+      - 200000
+      - 375000
+      - 390000
+
+required:
+  - compatible
+  - reg
+  - clock-frequency
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm2711-hdmi-i2c
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+  required:
+    - reg-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+examples:
+  - |
+      bsca: i2c@f0406200 {
+          clock-frequency = <390000>;
+          compatible = "brcm,brcmstb-i2c";
+          interrupt-parent = <&irq0_intc>;
+          reg = <0xf0406200 0x58>;
+          interrupts = <0x18>;
+          interrupt-names = "upg_bsca";
+      };
+
+  - |
+      ddc0: i2c@7ef04500 {
+          compatible = "brcm,bcm2711-hdmi-i2c";
+          reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+          reg-names = "bsc", "auto-i2c";
+          clock-frequency = <390000>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
deleted file mode 100644
index d12cc33cca6c..000000000000
--- a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Broadcom iProc I2C controller
-
-Required properties:
-
-- compatible:
-    Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c"
-
-- reg:
-    Define the base and range of the I/O address space that contain the iProc
-    I2C controller registers
-
-- clock-frequency:
-    This is the I2C bus clock. Need to be either 100000 or 400000
-
-- #address-cells:
-    Always 1 (for I2C addresses)
-
-- #size-cells:
-    Always 0
-
-Optional properties:
-
-- interrupts:
-    Should contain the I2C interrupt. For certain revisions of the I2C
-    controller, I2C interrupt is unwired to the interrupt controller. In such
-    case, this property should be left unspecified, and driver will fall back
-    to polling mode
-
-- brcm,ape-hsls-addr-mask:
-    Required for "brcm,iproc-nic-i2c". Host view of address mask into the
-    'APE' co-processor. Value must be unsigned, 32-bit
-
-Example:
-	i2c0: i2c@18008000 {
-		compatible = "brcm,iproc-i2c";
-		reg = <0x18008000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
-		clock-frequency = <100000>;
-
-		codec: wm8750@1a {
-			compatible = "wlf,wm8750";
-			reg = <0x1a>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
new file mode 100644
index 000000000000..2aa75b7add7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,iproc-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc I2C controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,iproc-i2c
+      - brcm,iproc-nic-i2c
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000 ]
+
+  interrupts:
+    description: |
+      Should contain the I2C interrupt. For certain revisions of the I2C
+      controller, I2C interrupt is unwired to the interrupt controller. In such
+      case, this property should be left unspecified, and driver will fall back
+      to polling mode
+    maxItems: 1
+
+  brcm,ape-hsls-addr-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Host view of address mask into the 'APE' co-processor
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,iproc-nic-i2c
+    then:
+      required:
+        - brcm,ape-hsls-addr-mask
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - clock-frequency
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@18008000 {
+        compatible = "brcm,iproc-i2c";
+        reg = <0x18008000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+        clock-frequency = <100000>;
+
+        wm8750@1a {
+            compatible = "wlf,wm8750";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
new file mode 100644
index 000000000000..2e95cda7262a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence I2C controller
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cdns,i2c-r1p10 # cadence i2c controller version 1.0
+      - cdns,i2c-r1p14 # cadence i2c controller version 1.4
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 1
+    maximum: 400000
+    description: |
+      Desired operating frequency, in Hz, of the bus.
+
+  clock-name:
+    const: pclk
+    description: |
+      Input clock name.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c@e0004000 {
+        compatible = "cdns,i2c-r1p10";
+        clocks = <&clkc 38>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+        reg = <0xe0004000 0x1000>;
+        clock-frequency = <400000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
new file mode 100644
index 000000000000..6e1c70e9275e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C bus that tunnels through the ChromeOS EC (cros-ec)
+
+maintainers:
+  - Doug Anderson <dianders@chromium.org>
+  - Benson Leung <bleung@chromium.org>
+
+description: |
+  On some ChromeOS board designs we've got a connection to the EC
+  (embedded controller) but no direct connection to some devices on the
+  other side of the EC (like a battery and PMIC).  To get access to
+  those devices we need to tunnel our i2c commands through the EC.
+
+  The node for this device should be under a cros-ec node like
+  google,cros-ec-spi or google,cros-ec-i2c.
+
+allOf:
+  - $ref: i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: google,cros-ec-i2c-tunnel
+
+  google,remote-bus:
+    description: The EC bus we'd like to talk to.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - google,remote-bus
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+
+            i2c-tunnel {
+                compatible = "google,cros-ec-i2c-tunnel";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                google,remote-bus = <0>;
+
+                battery: sbs-battery@b {
+                    compatible = "sbs,sbs-battery";
+                    reg = <0xb>;
+                    sbs,poll-retry-count = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
deleted file mode 100644
index b47f6ccb196a..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Device tree configuration for the I2C busses on the AST24XX, AST25XX, and AST26XX SoCs.
-
-Required Properties:
-- #address-cells	: should be 1
-- #size-cells		: should be 0
-- reg			: address offset and range of bus
-- compatible		: should be "aspeed,ast2400-i2c-bus"
-			  or "aspeed,ast2500-i2c-bus"
-			  or "aspeed,ast2600-i2c-bus"
-- clocks		: root clock of bus, should reference the APB
-			  clock in the second cell
-- resets		: phandle to reset controller with the reset number in
-			  the second cell
-- interrupts		: interrupt number
-
-Optional Properties:
-- bus-frequency	: frequency of the bus clock in Hz defaults to 100 kHz when not
-		  specified
-- multi-master	: states that there is another master active on this bus.
-
-Example:
-
-i2c {
-	compatible = "simple-bus";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 0x1e78a000 0x1000>;
-
-	i2c_ic: interrupt-controller@0 {
-		#interrupt-cells = <1>;
-		compatible = "aspeed,ast2400-i2c-ic";
-		reg = <0x0 0x40>;
-		interrupts = <12>;
-		interrupt-controller;
-	};
-
-	i2c0: i2c-bus@40 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x40 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <0>;
-		interrupt-parent = <&i2c_ic>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
deleted file mode 100644
index d4bad86107b8..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-I2C for Atmel platforms
-
-Required properties :
-- compatible : Must be one of:
-	"atmel,at91rm9200-i2c",
-	"atmel,at91sam9261-i2c",
-	"atmel,at91sam9260-i2c",
-	"atmel,at91sam9g20-i2c",
-	"atmel,at91sam9g10-i2c",
-	"atmel,at91sam9x5-i2c",
-	"atmel,sama5d4-i2c",
-	"atmel,sama5d2-i2c",
-	"microchip,sam9x60-i2c".
-- reg: physical base address of the controller and length of memory mapped
-     region.
-- interrupts: interrupt number to the cpu.
-- #address-cells = <1>;
-- #size-cells = <0>;
-- clocks: phandles to input clocks.
-
-Optional properties:
-- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
-- dmas: A list of two dma specifiers, one for each entry in dma-names.
-- dma-names: should contain "tx" and "rx".
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
-  capable I2C controllers.
-- i2c-sda-hold-time-ns: TWD hold time, only available for:
-	"atmel,sama5d4-i2c",
-	"atmel,sama5d2-i2c",
-	"microchip,sam9x60-i2c".
-- Child nodes conforming to i2c bus binding
-
-Examples :
-
-i2c0: i2c@fff84000 {
-	compatible = "atmel,at91sam9g20-i2c";
-	reg = <0xfff84000 0x100>;
-	interrupts = <12 4 6>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&twi0_clk>;
-	clock-frequency = <400000>;
-
-	24c512@50 {
-		compatible = "atmel,24c512";
-		reg = <0x50>;
-		pagesize = <128>;
-	}
-}
-
-i2c0: i2c@f8034600 {
-	compatible = "atmel,sama5d2-i2c";
-	reg = <0xf8034600 0x100>;
-	interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-	dmas = <&dma0
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-		AT91_XDMAC_DT_PERID(11)>,
-	       <&dma0
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-		AT91_XDMAC_DT_PERID(12)>;
-	dma-names = "tx", "rx";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&flx0>;
-	atmel,fifo-size = <16>;
-	i2c-sda-hold-time-ns = <336>;
-
-	wm8731: wm8731@1a {
-		compatible = "wm8731";
-		reg = <0x1a>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt b/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
deleted file mode 100644
index 0380609b177a..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Broadcom stb bsc iic master controller
-
-Required properties:
-
-- compatible: should be "brcm,brcmstb-i2c" or "brcm,brcmper-i2c"
-- clock-frequency: 32-bit decimal value of iic master clock freqency in Hz
-		   valid values are 375000, 390000, 187500, 200000
-		   93750, 97500, 46875 and 50000
-- reg: specifies the base physical address and size of the registers
-
-Optional properties :
-
-- interrupts: specifies the interrupt number, the irq line to be used
-- interrupt-names: Interrupt name string
-
-Example:
-
-bsca: i2c@f0406200 {
-      clock-frequency = <390000>;
-      compatible = "brcm,brcmstb-i2c";
-      interrupt-parent = <&irq0_intc>;
-      reg = <0xf0406200 0x58>;
-      interrupts = <0x18>;
-      interrupt-names = "upg_bsca";
-};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
deleted file mode 100644
index ebaa90c58c8e..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Binding for the Cadence I2C controller
-
-Required properties:
-  - reg: Physical base address and size of the controller's register area.
-  - compatible: Should contain one of:
-		* "cdns,i2c-r1p10"
-		Note:	Use this when cadence i2c controller version 1.0 is used.
-		* "cdns,i2c-r1p14"
-		Note:	Use this when cadence i2c controller version 1.4 is used.
-  - clocks: Input clock specifier. Refer to common clock bindings.
-  - interrupts: Interrupt specifier. Refer to interrupt bindings.
-  - #address-cells: Should be 1.
-  - #size-cells: Should be 0.
-
-Optional properties:
-  - clock-frequency: Desired operating frequency, in Hz, of the bus.
-  - clock-names: Input clock name, should be 'pclk'.
-
-Example:
-	i2c@e0004000 {
-		compatible = "cdns,i2c-r1p10";
-		clocks = <&clkc 38>;
-		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-		reg = <0xe0004000 0x1000>;
-		clock-frequency = <400000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
deleted file mode 100644
index 898f030eba62..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-I2C bus that tunnels through the ChromeOS EC (cros-ec)
-======================================================
-On some ChromeOS board designs we've got a connection to the EC (embedded
-controller) but no direct connection to some devices on the other side of
-the EC (like a battery and PMIC).  To get access to those devices we need
-to tunnel our i2c commands through the EC.
-
-The node for this device should be under a cros-ec node like google,cros-ec-spi
-or google,cros-ec-i2c.
-
-
-Required properties:
-- compatible: google,cros-ec-i2c-tunnel
-- google,remote-bus: The EC bus we'd like to talk to.
-
-Optional child nodes:
-- One node per I2C device connected to the tunnelled I2C bus.
-
-
-Example:
-	cros-ec@0 {
-		compatible = "google,cros-ec-spi";
-
-		...
-
-		i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			google,remote-bus = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-			};
-		};
-	}
diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
index b745f3706120..6590501c53d4 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
@@ -8,7 +8,7 @@ Required properties:
 - reg : Offset and length of the register set for the device
 - clocks: I2C functional clock phandle.
 	  For 66AK2G this property should be set per binding,
-	  Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+	  Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
 
 SoC-specific Required Properties:
 
@@ -17,7 +17,7 @@ The following are mandatory properties for Keystone 2 66AK2G SoCs only:
 - power-domains:	Should contain a phandle to a PM domain provider node
 			and an args specifier containing the I2C device id
 			value. This property is as per the binding,
-			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
 
 Recommended properties :
 - interrupts : standard interrupt property.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
index 81b5d55086fa..86b2e433a969 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
@@ -27,7 +27,7 @@ Required properties:
 - i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C
 		parents.
 
-Furthermore, I2C mux properties and child nodes. See i2c-mux.txt in this
+Furthermore, I2C mux properties and child nodes. See i2c-mux.yaml in this
 directory.
 
 Example:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
deleted file mode 100644
index 08be4d3846e5..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-* Synopsys DesignWare I2C
-
-Required properties :
-
- - compatible : should be "snps,designware-i2c"
-                or "mscc,ocelot-i2c" with "snps,designware-i2c" for fallback
- - reg : Offset and length of the register set for the device
- - interrupts : <IRQ> where IRQ is the interrupt number.
- - clocks : phandles for the clocks, see the description of clock-names below.
-   The phandle for the "ic_clk" clock is required. The phandle for the "pclk"
-   clock is optional. If a single clock is specified but no clock-name, it is
-   the "ic_clk" clock. If both clocks are listed, the "ic_clk" must be first.
-
-Recommended properties :
-
- - clock-frequency : desired I2C bus clock frequency in Hz.
-
-Optional properties :
-
- - clock-names : Contains the names of the clocks:
-    "ic_clk", for the core clock used to generate the external I2C clock.
-    "pclk", the interface clock, required for register access.
-
- - reg : for "mscc,ocelot-i2c", a second register set to configure the SDA hold
-   time, named ICPU_CFG:TWI_DELAY in the datasheet.
-
- - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
-   This option is only supported in hardware blocks version 1.11a or newer and
-   on Microsemi SoCs ("mscc,ocelot-i2c" compatible).
-
- - i2c-scl-falling-time-ns : should contain the SCL falling time in nanoseconds.
-   This value which is by default 300ns is used to compute the tLOW period.
-
- - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
-   This value which is by default 300ns is used to compute the tHIGH period.
-
-Examples :
-
-	i2c@f0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,designware-i2c";
-		reg = <0xf0000 0x1000>;
-		interrupts = <11>;
-		clock-frequency = <400000>;
-	};
-
-	i2c@1120000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,designware-i2c";
-		reg = <0x1120000 0x1000>;
-		interrupt-parent = <&ictl>;
-		interrupts = <12 1>;
-		clock-frequency = <400000>;
-		i2c-sda-hold-time-ns = <300>;
-		i2c-sda-falling-time-ns = <300>;
-		i2c-scl-falling-time-ns = <300>;
-	};
-
-	i2c@1120000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x2000 0x100>;
-		clock-frequency = <400000>;
-		clocks = <&i2cclk>;
-		interrupts = <0>;
-
-		eeprom@64 {
-			compatible = "linux,slave-24c02";
-			reg = <0x40000064>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
deleted file mode 100644
index 3b30e54ae3c7..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Energymicro efm32 i2c controller
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible : should be "energymicro,efm32-i2c"
- - interrupts : the interrupt number
- - clocks : reference to the module clock
-
-Recommended properties :
-
- - clock-frequency : maximal I2C bus clock frequency in Hz.
- - energymicro,location : Decides the location of the USART I/O pins.
-   Allowed range : [0 .. 6]
-
-Example:
-	i2c0: i2c@4000a000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "energymicro,efm32-i2c";
-		reg = <0x4000a000 0x400>;
-		interrupts = <9>;
-		clocks = <&cmu clk_HFPERCLKI2C0>;
-		clock-frequency = <100000>;
-		energymicro,location = <3>;
-
-		eeprom@50 {
-			compatible = "microchip,24c02";
-			reg = <0x50>;
-			pagesize = <16>;
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
deleted file mode 100644
index 2dbc0b62daa6..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Samsung's High Speed I2C controller
-
-The Samsung's High Speed I2C controller is used to interface with I2C devices
-at various speeds ranging from 100khz to 3.4Mhz.
-
-Required properties:
-  - compatible: value should be.
-	-> "samsung,exynos5-hsi2c", (DEPRECATED)
-				for i2c compatible with HSI2C available
-				on Exynos5250 and Exynos5420 SoCs.
-	-> "samsung,exynos5250-hsi2c", for i2c compatible with HSI2C available
-				on Exynos5250 and Exynos5420 SoCs.
-	-> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
-				on Exynos5260 SoCs.
-	-> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available
-				on Exynos7 SoCs.
-
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-  - #address-cells: always 1 (for i2c addresses)
-  - #size-cells: always 0
-
-  - Pinctrl:
-    - pinctrl-0: Pin control group to be used for this controller.
-    - pinctrl-names: Should contain only one value - "default".
-
-Optional properties:
-  - clock-frequency: Desired operating frequency in Hz of the bus.
-    -> If not specified, the bus operates in fast-speed mode at
-       at 100khz.
-    -> If specified, the bus operates in high-speed mode only if the
-       clock-frequency is >= 1Mhz.
-
-Example:
-
-hsi2c@12ca0000 {
-	compatible = "samsung,exynos5250-hsi2c";
-	reg = <0x12ca0000 0x100>;
-	interrupts = <56>;
-	clock-frequency = <100000>;
-
-	pinctrl-0 = <&i2c4_bus>;
-	pinctrl-names = "default";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
new file mode 100644
index 000000000000..3e52a0db6c41
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-exynos5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung's High Speed I2C controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung's High Speed I2C controller is used to interface with I2C devices
+  at various speeds ranging from 100kHz to 3.4MHz.
+
+  In case the HSI2C controller is encapsulated within USI block (it's the case
+  e.g. for Exynos850 and Exynos Auto V9 SoCs), it might be also necessary to
+  define USI node in device tree file, choosing "i2c" configuration. Please see
+  Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5250-hsi2c    # Exynos5250 and Exynos5420
+          - samsung,exynos5260-hsi2c    # Exynos5260
+          - samsung,exynos7-hsi2c       # Exynos7
+          - samsung,exynosautov9-hsi2c  # ExynosAutoV9 and Exynos850
+      - const: samsung,exynos5-hsi2c    # Exynos5250 and Exynos5420
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+    description:
+      Desired operating frequency in Hz of the bus.
+
+      If not specified, the bus operates in fast-speed mode at 100kHz.
+
+      If specified, the bus operates in high-speed mode only if the
+      clock-frequency is >= 1MHz.
+
+  clocks:
+    minItems: 1
+    items:
+      - description: I2C operating clock
+      - description: Bus clock (APB)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: hsi2c
+      - const: hsi2c_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov9-hsi2c
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+      required:
+        - clock-names
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    hsi2c_8: i2c@12e00000 {
+        compatible = "samsung,exynos5250-hsi2c";
+        reg = <0x12e00000 0x1000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <100000>;
+        clocks = <&clock CLK_USI4>;
+        clock-names = "hsi2c";
+
+        pmic@66 {
+            /* compatible = "samsung,s2mps11-pmic"; */
+            reg = <0x66>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/exynos850.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    hsi2c_2: i2c@138c0000 {
+        compatible = "samsung,exynosautov9-hsi2c";
+        reg = <0x138c0000 0xc0>;
+        interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>,
+                 <&cmu_peri CLK_GOUT_HSI2C2_PCLK>;
+        clock-names = "hsi2c", "hsi2c_pclk";
+
+        pmic@66 {
+            /* compatible = "samsung,s2mps11-pmic"; */
+            reg = <0x66>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gate.txt b/Documentation/devicetree/bindings/i2c/i2c-gate.txt
deleted file mode 100644
index 1846d236e656..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-gate.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-An i2c gate is useful to e.g. reduce the digital noise for RF tuners connected
-to the i2c bus. Gates are similar to arbitrators in that you need to perform
-some kind of operation to access the i2c bus past the arbitrator/gate, but
-there are no competing masters to consider for gates and therefore there is
-no arbitration happening for gates.
-
-Common i2c gate properties.
-
-- i2c-gate child node
-
-Required properties for the i2c-gate child node:
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties for i2c-gate child node:
-- Child nodes conforming to i2c bus binding
-
-
-Example :
-
-	/*
-	   An Invensense mpu9150 at address 0x68 featuring an on-chip Asahi
-	   Kasei ak8975 compass behind a gate.
-	 */
-
-	mpu9150@68 {
-		compatible = "invensense,mpu9150";
-		reg = <0x68>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <18 1>;
-
-		i2c-gate {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ax8975@c {
-				compatible = "ak,ak8975";
-				reg = <0x0c>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
new file mode 100644
index 000000000000..0cdc3e890df7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-gate.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common i2c gate properties
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  An i2c gate is useful to e.g. reduce the digital noise for RF tuners connected
+  to the i2c bus. Gates are similar to arbitrators in that you need to perform
+  some kind of operation to access the i2c bus past the arbitrator/gate, but
+  there are no competing masters to consider for gates and therefore there is
+  no arbitration happening for gates.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+
+properties:
+  $nodename:
+    const: i2c-gate
+
+additionalProperties: true
+
+examples:
+  - |
+    i2c-gate {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ak8975@c {
+            compatible = "asahi-kasei,ak8975";
+            reg = <0x0c>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
index da6129090a8e..fd040284561f 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Bindings for GPIO bitbanged I2C
 
 maintainers:
-  - Wolfram Sang <wolfram@the-dreams.de>
+  - Wolfram Sang <wsa@kernel.org>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
@@ -39,11 +39,9 @@ properties:
 
   i2c-gpio,delay-us:
     description: delay between GPIO operations (may depend on each platform)
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   i2c-gpio,timeout-ms:
     description: timeout to get data
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   # Deprecated properties, do not use in new device tree sources:
   gpios:
@@ -52,15 +50,15 @@ properties:
     description: sda and scl gpio, alternative for {sda,scl}-gpios
 
   i2c-gpio,sda-open-drain:
-    # Generate a warning if present
-    not: true
+    type: boolean
+    deprecated: true
     description: this means that something outside of our control has put
       the GPIO line used for SDA into open drain mode, and that something is
       not the GPIO chip. It is essentially an inconsistency flag.
 
   i2c-gpio,scl-open-drain:
-    # Generate a warning if present
-    not: true
+    type: boolean
+    deprecated: true
     description: this means that something outside of our control has put the
       GPIO line used for SCL into open drain mode, and that something is not
       the GPIO chip. It is essentially an inconsistency flag.
@@ -70,4 +68,6 @@ required:
   - sda-gpios
   - scl-gpios
 
+unevaluatedProperties: false
+
 ...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
deleted file mode 100644
index f0c072ff9eca..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Freescale Low Power Inter IC (LPI2C) for i.MX
-
-Required properties:
-- compatible :
-  - "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
-  - "fsl,imx8qxp-lpi2c" for LPI2C compatible with the one integrated on i.MX8QXP soc
-  - "fsl,imx8qm-lpi2c" for LPI2C compatible with the one integrated on i.MX8QM soc
-- reg : address and length of the lpi2c master registers
-- interrupts : lpi2c interrupt
-- clocks : lpi2c clock specifier
-
-Examples:
-
-lpi2c7: lpi2c7@40a50000 {
-	compatible = "fsl,imx7ulp-lpi2c";
-	reg = <0x40A50000 0x10000>;
-	interrupt-parent = <&intc>;
-	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks IMX7ULP_CLK_LPI2C7>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
new file mode 100644
index 000000000000..4656f5112b84
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-imx-lpi2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Low Power Inter IC (LPI2C) for i.MX
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx7ulp-lpi2c
+      - items:
+          - enum:
+              - fsl,imx8qxp-lpi2c
+              - fsl,imx8dxl-lpi2c
+              - fsl,imx8qm-lpi2c
+              - fsl,imx8ulp-lpi2c
+              - fsl,imx93-lpi2c
+          - const: fsl,imx7ulp-lpi2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+  clock-frequency: true
+
+  clock-names:
+    items:
+      - const: per
+      - const: ipg
+
+  clocks:
+    maxItems: 2
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for TX
+      - description: DMA controller phandle and request line for RX
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@40a50000 {
+        compatible = "fsl,imx7ulp-lpi2c";
+        reg = <0x40A50000 0x10000>;
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX7ULP_CLK_LPI2C7>,
+                 <&clks IMX7ULP_CLK_NIC1_BUS_DIV>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
deleted file mode 100644
index b967544590e8..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
-
-Required properties:
-- compatible :
-  - "fsl,imx1-i2c" for I2C compatible with the one integrated on i.MX1 SoC
-  - "fsl,imx21-i2c" for I2C compatible with the one integrated on i.MX21 SoC
-  - "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC
-- reg : Should contain I2C/HS-I2C registers location and length
-- interrupts : Should contain I2C/HS-I2C interrupt
-- clocks : Should contain the I2C/HS-I2C clock specifier
-
-Optional properties:
-- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
-  The absence of the property indicates the default frequency 100 kHz.
-- dmas: A list of two dma specifiers, one for each entry in dma-names.
-- dma-names: should contain "tx" and "rx".
-- scl-gpios: specify the gpio related to SCL pin
-- sda-gpios: specify the gpio related to SDA pin
-- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
-  bus recovery, call it "gpio" state
-
-Examples:
-
-i2c@83fc4000 { /* I2C2 on i.MX51 */
-	compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
-	reg = <0x83fc4000 0x4000>;
-	interrupts = <63>;
-};
-
-i2c@70038000 { /* HS-I2C on i.MX51 */
-	compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
-	reg = <0x70038000 0x4000>;
-	interrupts = <64>;
-	clock-frequency = <400000>;
-};
-
-i2c0: i2c@40066000 { /* i2c0 on vf610 */
-	compatible = "fsl,vf610-i2c";
-	reg = <0x40066000 0x1000>;
-	interrupts =<0 71 0x04>;
-	dmas = <&edma0 0 50>,
-		<&edma0 0 51>;
-	dma-names = "rx","tx";
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
new file mode 100644
index 000000000000..85ee1282d6d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx1-i2c
+      - const: fsl,imx21-i2c
+      - const: fsl,vf610-i2c
+      - items:
+          - enum:
+              - fsl,ls1012a-i2c
+              - fsl,ls1021a-i2c
+              - fsl,ls1028a-i2c
+              - fsl,ls1043a-i2c
+              - fsl,ls1046a-i2c
+              - fsl,ls1088a-i2c
+              - fsl,ls208xa-i2c
+              - fsl,lx2160a-i2c
+          - const: fsl,vf610-i2c
+      - items:
+          - const: fsl,imx35-i2c
+          - const: fsl,imx1-i2c
+      - items:
+          - const: fsl,imx7d-i2c
+          - const: fsl,imx21-i2c
+      - items:
+          - enum:
+              - fsl,imx25-i2c
+              - fsl,imx27-i2c
+              - fsl,imx31-i2c
+              - fsl,imx50-i2c
+              - fsl,imx51-i2c
+              - fsl,imx53-i2c
+              - fsl,imx6q-i2c
+              - fsl,imx6sl-i2c
+              - fsl,imx6sx-i2c
+              - fsl,imx6sll-i2c
+              - fsl,imx6ul-i2c
+              - fsl,imx7s-i2c
+              - fsl,imx8mq-i2c
+              - fsl,imx8mm-i2c
+              - fsl,imx8mn-i2c
+              - fsl,imx8mp-i2c
+          - const: fsl,imx21-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+  clock-frequency:
+    minimum: 1
+    default: 100000
+    maximum: 400000
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  sda-gpios:
+    maxItems: 1
+
+  scl-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c@83fc4000 {
+        compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
+        reg = <0x83fc4000 0x4000>;
+        interrupts = <63>;
+        clocks = <&clks IMX5_CLK_I2C2_GATE>;
+    };
+
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    i2c@40066000 {
+        compatible = "fsl,vf610-i2c";
+        reg = <0x40066000 0x1000>;
+        interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks VF610_CLK_I2C0>;
+        clock-names = "ipg";
+        dmas = <&edma0 0 50>,
+               <&edma0 0 51>;
+        dma-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
deleted file mode 100644
index d229eff5ca1b..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Ingenic JZ4780 I2C Bus controller
-
-Required properties:
-- compatible: should be one of the following:
-  - "ingenic,jz4780-i2c" for the JZ4780
-  - "ingenic,x1000-i2c" for the X1000
-- reg: Should contain the address & size of the I2C controller registers.
-- interrupts: Should specify the interrupt provided by parent.
-- clocks: Should contain a single clock specifier for the JZ4780 I2C clock.
-- clock-frequency: desired I2C bus clock frequency in Hz.
-
-Recommended properties:
-- pinctrl-names: should be "default";
-- pinctrl-0: phandle to pinctrl function
-
-Example
-
-/ {
-	i2c4: i2c4@10054000 {
-		compatible = "ingenic,jz4780-i2c";
-		reg = <0x10054000 0x1000>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <56>;
-
-		clocks = <&cgu JZ4780_CLK_SMB4>;
-		clock-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pins_i2c4_data>;
-
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt b/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
deleted file mode 100644
index 42a390526957..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-* I2C
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a
-   compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121,
-   mpc5200 or mpc5200b. For the mpc5121, an additional node
-   "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
-
-Recommended properties :
-
- - interrupts : <a b> where a is the interrupt number and b is a
-   field that represents an encoding of the sense and level
-   information for the interrupt.  This should be encoded based on
-   the information in section 2) depending on the type of interrupt
-   controller you have.
- - fsl,preserve-clocking : boolean; if defined, the clock settings
-   from the bootloader are preserved (not touched).
- - clock-frequency : desired I2C bus clock frequency in Hz.
- - fsl,timeout : I2C bus timeout in microseconds.
-
-Examples :
-
-	/* MPC5121 based board */
-	i2c@1740 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-		reg = <0x1740 0x20>;
-		interrupts = <11 0x8>;
-		interrupt-parent = <&ipic>;
-		clock-frequency = <100000>;
-	};
-
-	i2ccontrol@1760 {
-		compatible = "fsl,mpc5121-i2c-ctrl";
-		reg = <0x1760 0x8>;
-	};
-
-	/* MPC5200B based board */
-	i2c@3d00 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-		reg = <0x3d00 0x40>;
-		interrupts = <2 15 0>;
-		interrupt-parent = <&mpc5200_pic>;
-		fsl,preserve-clocking;
-	};
-
-	/* MPC8544 base board */
-	i2c@3100 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,mpc8544-i2c", "fsl-i2c";
-		reg = <0x3100 0x100>;
-		interrupts = <43 2>;
-		interrupt-parent = <&mpic>;
-		clock-frequency = <400000>;
-		fsl,timeout = <10000>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
new file mode 100644
index 000000000000..018e1b944424
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C-Bus adapter for MPC824x/83xx/85xx/86xx/512x/52xx SoCs
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mpc5200-i2c
+              - fsl,mpc5200-i2c
+              - fsl,mpc5121-i2c
+              - fsl,mpc8313-i2c
+              - fsl,mpc8543-i2c
+              - fsl,mpc8544-i2c
+          - const: fsl-i2c
+      - items:
+          - const: fsl,mpc5200b-i2c
+          - const: fsl,mpc5200-i2c
+          - const: fsl-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,preserve-clocking:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      if defined, the clock settings from the bootloader are
+      preserved (not touched)
+
+  fsl,timeout:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      I2C bus timeout in microseconds
+
+  fsl,i2c-erratum-a004447:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Indicates the presence of QorIQ erratum A-004447, which
+      says that the standard i2c recovery scheme mechanism does
+      not work and an alternate implementation is needed.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* MPC5121 based board */
+    i2c@1740 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+        reg = <0x1740 0x20>;
+        interrupts = <11 0x8>;
+        interrupt-parent = <&ipic>;
+        clock-frequency = <100000>;
+    };
+
+  - |
+    /* MPC5200B based board */
+    i2c@3d00 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,mpc5200b-i2c", "fsl,mpc5200-i2c", "fsl-i2c";
+        reg = <0x3d00 0x40>;
+        interrupts = <2 15 0>;
+        interrupt-parent = <&mpc5200_pic>;
+        fsl,preserve-clocking;
+    };
+
+  - |
+    /* MPC8544 base board */
+    i2c@3100 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+        reg = <0x3100 0x100>;
+        interrupts = <43 2>;
+        interrupt-parent = <&mpic>;
+        clock-frequency = <400000>;
+        fsl,timeout = <10000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
deleted file mode 100644
index 68f6d73a8b73..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* MediaTek's I2C controller
-
-The MediaTek's I2C controller is used to interface with I2C devices.
-
-Required properties:
-  - compatible: value should be either of the following.
-      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
-      "mediatek,mt2712-i2c": for MediaTek MT2712
-      "mediatek,mt6577-i2c": for MediaTek MT6577
-      "mediatek,mt6589-i2c": for MediaTek MT6589
-      "mediatek,mt7622-i2c": for MediaTek MT7622
-      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
-      "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
-      "mediatek,mt8173-i2c": for MediaTek MT8173
-      "mediatek,mt8183-i2c": for MediaTek MT8183
-      "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516
-  - reg: physical base address of the controller and dma base, length of memory
-    mapped region.
-  - interrupts: interrupt number to the cpu.
-  - clock-div: the fixed value for frequency divider of clock source in i2c
-    module. Each IC may be different.
-  - clocks: clock name from clock manager
-  - clock-names: Must include "main" and "dma", "arb" is for multi-master that
-    one bus has more than two i2c controllers, if enable have-pmic need include
-    "pmic" extra.
-
-Optional properties:
-  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
-    is 100000.
-  - mediatek,have-pmic: platform can control i2c form special pmic side.
-    Only mt6589 and mt8135 support this feature.
-  - mediatek,use-push-pull: IO config use push-pull mode.
-
-Example:
-
-	i2c0: i2c@1100d000 {
-			compatible = "mediatek,mt6577-i2c";
-			reg = <0x1100d000 0x70>,
-			      <0x11000300 0x80>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
-			clock-frequency = <400000>;
-			mediatek,have-pmic;
-			clock-div = <16>;
-			clocks = <&i2c0_ck>, <&ap_dma_ck>;
-			clock-names = "main", "dma";
-	};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
new file mode 100644
index 000000000000..4e730fb7be56
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mt65xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek I2C controller
+
+description:
+  This driver interfaces with the native I2C controller present in
+  various MediaTek SoCs.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+maintainers:
+  - Qii Wang <qii.wang@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt2712-i2c
+      - const: mediatek,mt6577-i2c
+      - const: mediatek,mt6589-i2c
+      - const: mediatek,mt7622-i2c
+      - const: mediatek,mt8168-i2c
+      - const: mediatek,mt8173-i2c
+      - const: mediatek,mt8183-i2c
+      - const: mediatek,mt8186-i2c
+      - const: mediatek,mt8188-i2c
+      - const: mediatek,mt8192-i2c
+      - items:
+          - enum:
+              - mediatek,mt7629-i2c
+              - mediatek,mt8516-i2c
+          - const: mediatek,mt2712-i2c
+      - items:
+          - enum:
+              - mediatek,mt2701-i2c
+              - mediatek,mt6797-i2c
+              - mediatek,mt7623-i2c
+          - const: mediatek,mt6577-i2c
+      - items:
+          - enum:
+              - mediatek,mt8195-i2c
+          - const: mediatek,mt8192-i2c
+
+  reg:
+    items:
+      - description: Physical base address
+      - description: DMA base address
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: Main clock for I2C bus
+      - description: Clock for I2C via DMA
+      - description: Bus arbitrator clock
+      - description: Clock for I2C from PMIC
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: main
+      - const: dma
+      - const: arb
+      - const: pmic
+
+  clock-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Frequency divider of clock source in I2C module
+
+  clock-frequency:
+    default: 100000
+    description:
+      SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+  mediatek,have-pmic:
+    description: Platform controls I2C from PMIC side
+    type: boolean
+
+  mediatek,use-push-pull:
+    description: Use push-pull mode I/O config
+    type: boolean
+
+  vbus-supply:
+    description: Phandle to the regulator providing power to SCL/SDA
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-div
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0: i2c@1100d000 {
+      compatible = "mediatek,mt6577-i2c";
+      reg = <0x1100d000 0x70>, <0x11000300 0x80>;
+      interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&i2c0_ck>, <&ap_dma_ck>;
+      clock-names = "main", "dma";
+      clock-div = <16>;
+      clock-frequency = <400000>;
+      mediatek,have-pmic;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt b/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
deleted file mode 100644
index bc36f0eb94cd..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek MT7621/MT7628 I2C master controller
-
-Required properties:
-
-- compatible: Should be one of the following:
-  - "mediatek,mt7621-i2c": for MT7621/MT7628/MT7688 platforms
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-- reg: Address and length of the register set for the device
-- resets: phandle to the reset controller asserting this device in
-          reset
-  See ../reset/reset.txt for details.
-
-Optional properties :
-
-Example:
-
-i2c: i2c@900 {
-	compatible = "mediatek,mt7621-i2c";
-	reg = <0x900 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	resets = <&rstctrl 16>;
-	reset-names = "i2c";
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
deleted file mode 100644
index 21da3ecbb370..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-GPIO-based I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses GPIOs to
-route the I2C signals.
-
-                                  +-----+  +-----+
-                                  | dev |  | dev |
-    +------------+                +-----+  +-----+
-    | SoC        |                   |        |
-    |            |          /--------+--------+
-    |   +------+ |  +------+    child bus A, on GPIO value set to 0
-    |   | I2C  |-|--| Mux  |
-    |   +------+ |  +--+---+    child bus B, on GPIO value set to 1
-    |            |     |    \----------+--------+--------+
-    |   +------+ |     |               |        |        |
-    |   | GPIO |-|-----+            +-----+  +-----+  +-----+
-    |   +------+ |                  | dev |  | dev |  | dev |
-    +------------+                  +-----+  +-----+  +-----+
-
-Required properties:
-- compatible: i2c-mux-gpio
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
-  port is connected to.
-- mux-gpios: list of gpios used to control the muxer
-* Standard I2C mux properties. See i2c-mux.txt in this directory.
-* I2C child bus nodes. See i2c-mux.txt in this directory.
-
-Optional properties:
-- idle-state: value to set the muxer to when idle. When no value is
-  given, it defaults to the last value used.
-
-For each i2c child node, an I2C child bus will be created. They will
-be numbered based on their order in the device tree.
-
-Whenever an access is made to a device on a child bus, the value set
-in the relevant node's reg property will be output using the list of
-GPIOs, the first in the list holding the least-significant value.
-
-If an idle state is defined, using the idle-state (optional) property,
-whenever an access is not being made to a device on a child bus, the
-GPIOs will be set according to the idle value.
-
-If an idle state is not defined, the most recently used value will be
-left programmed into hardware whenever no access is being made to a
-device on a child bus.
-
-Example:
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-		i2c-parent = <&i2c1>;
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ssd1307: oled@3c {
-				compatible = "solomon,ssd1307fb-i2c";
-				reg = <0x3c>;
-				pwms = <&pwm 4 3000>;
-				reset-gpios = <&gpio2 7 1>;
-				reset-active-low;
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				compatible = "nxp,pca9555";
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x20>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
new file mode 100644
index 000000000000..6e0a5686af04
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based I2C Bus Mux
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+description: |
+  This binding describes an I2C bus multiplexer that uses GPIOs to route the I2C signals.
+
+                                  +-----+  +-----+
+                                  | dev |  | dev |
+    +------------+                +-----+  +-----+
+    | SoC        |                   |        |
+    |            |          /--------+--------+
+    |   +------+ |  +------+    child bus A, on GPIO value set to 0
+    |   | I2C  |-|--| Mux  |
+    |   +------+ |  +--+---+    child bus B, on GPIO value set to 1
+    |            |     |    \----------+--------+--------+
+    |   +------+ |     |               |        |        |
+    |   | GPIO |-|-----+            +-----+  +-----+  +-----+
+    |   +------+ |                  | dev |  | dev |  | dev |
+    +------------+                  +-----+  +-----+  +-----+
+
+  For each I2C child node, an I2C child bus will be created. They will be numbered based on their
+  order in the device tree.
+
+  Whenever an access is made to a device on a child bus, the value set in the relevant node's reg
+  property will be output using the list of GPIOs, the first in the list holding the least-
+  significant value.
+
+  If an idle state is defined, using the idle-state (optional) property, whenever an access is not
+  being made to a device on a child bus, the GPIOs will be set according to the idle value.
+
+  If an idle state is not defined, the most recently used value will be left programmed into
+  hardware whenever no access is being made to a device on a child bus.
+
+properties:
+  compatible:
+    const: i2c-mux-gpio
+
+  i2c-parent:
+    description: phandle of the I2C bus that this multiplexer's master-side port is connected to
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  mux-gpios:
+    description: list of GPIOs used to control the muxer
+    minItems: 1
+    maxItems: 4  # Should be enough
+
+  idle-state:
+    description: Value to set the muxer to when idle. When no value is given, it defaults to the
+      last value used.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+allOf:
+  - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - i2c-parent
+  - mux-gpios
+
+examples:
+  - |
+    i2cmux {
+      compatible = "i2c-mux-gpio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mux-gpios = <&gpio1 22 0>, <&gpio1 23 0>;
+      i2c-parent = <&i2c1>;
+
+      i2c@1 {
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ssd1307: oled@3c {
+          compatible = "solomon,ssd1307fb-i2c";
+          reg = <0x3c>;
+          pwms = <&pwm 4 3000>;
+          reset-gpios = <&gpio2 7 1>;
+        };
+      };
+
+      i2c@3 {
+        reg = <3>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pca9555: pca9555@20 {
+          compatible = "nxp,pca9555";
+          gpio-controller;
+          #gpio-cells = <2>;
+          reg = <0x20>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt
deleted file mode 100644
index 8b444b94e92f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-General Purpose I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses a mux controller
-from the mux subsystem to route the I2C signals.
-
-                                  .-----.  .-----.
-                                  | dev |  | dev |
-    .------------.                '-----'  '-----'
-    | SoC        |                   |        |
-    |            |          .--------+--------'
-    |   .------. |  .------+    child bus A, on MUX value set to 0
-    |   | I2C  |-|--| Mux  |
-    |   '------' |  '--+---+    child bus B, on MUX value set to 1
-    |   .------. |     |    '----------+--------+--------.
-    |   | MUX- | |     |               |        |        |
-    |   | Ctrl |-|-----+            .-----.  .-----.  .-----.
-    |   '------' |                  | dev |  | dev |  | dev |
-    '------------'                  '-----'  '-----'  '-----'
-
-Required properties:
-- compatible: i2c-mux
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
-  port is connected to.
-- mux-controls: The phandle of the mux controller to use for operating the
-  mux.
-* Standard I2C mux properties. See i2c-mux.txt in this directory.
-* I2C child bus nodes. See i2c-mux.txt in this directory. The sub-bus number
-  is also the mux-controller state described in ../mux/mux-controller.txt
-
-Optional properties:
-- mux-locked: If present, explicitly allow unrelated I2C transactions on the
-  parent I2C adapter at these times:
-   + during setup of the multiplexer
-   + between setup of the multiplexer and the child bus I2C transaction
-   + between the child bus I2C transaction and releasing of the multiplexer
-   + during releasing of the multiplexer
-  However, I2C transactions to devices behind all I2C multiplexers connected
-  to the same parent adapter that this multiplexer is connected to are blocked
-  for the full duration of the complete multiplexed I2C transaction (i.e.
-  including the times covered by the above list).
-  If mux-locked is not present, the multiplexer is assumed to be parent-locked.
-  This means that no unrelated I2C transactions are allowed on the parent I2C
-  adapter for the complete multiplexed I2C transaction.
-  The properties of mux-locked and parent-locked multiplexers are discussed
-  in more detail in Documentation/i2c/i2c-topology.rst.
-
-For each i2c child node, an I2C child bus will be created. They will
-be numbered based on their order in the device tree.
-
-Whenever an access is made to a device on a child bus, the value set
-in the relevant node's reg property will be set as the state in the
-mux controller.
-
-Example:
-	mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
-			    <&pioA 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	i2c-mux {
-		compatible = "i2c-mux";
-		mux-locked;
-		i2c-parent = <&i2c1>;
-
-		mux-controls = <&mux>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ssd1307: oled@3c {
-				compatible = "solomon,ssd1307fb-i2c";
-				reg = <0x3c>;
-				pwms = <&pwm 4 3000>;
-				reset-gpios = <&gpio2 7 1>;
-				reset-active-low;
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				compatible = "nxp,pca9555";
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x20>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
new file mode 100644
index 000000000000..b6af924dee2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-gpmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: General Purpose I2C Bus Mux
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |+
+  This binding describes an I2C bus multiplexer that uses a mux controller
+  from the mux subsystem to route the I2C signals.
+
+                                    .-----.  .-----.
+                                    | dev |  | dev |
+      .------------.                '-----'  '-----'
+      | SoC        |                   |        |
+      |            |          .--------+--------'
+      |   .------. |  .------+    child bus A, on MUX value set to 0
+      |   | I2C  |-|--| Mux  |
+      |   '------' |  '--+---+    child bus B, on MUX value set to 1
+      |   .------. |     |    '----------+--------+--------.
+      |   | MUX- | |     |               |        |        |
+      |   | Ctrl |-|-----+            .-----.  .-----.  .-----.
+      |   '------' |                  | dev |  | dev |  | dev |
+      '------------'                  '-----'  '-----'  '-----'
+
+
+allOf:
+  - $ref: /schemas/i2c/i2c-mux.yaml#
+
+properties:
+  compatible:
+    const: i2c-mux
+
+  i2c-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the I2C bus that this multiplexer's master-side port is
+      connected to.
+
+  mux-controls:
+    maxItems: 1
+    description:
+      The mux-controller states are the I2C sub-bus numbers.
+
+  mux-locked:
+    type: boolean
+    description: |
+      Explicitly allow unrelated I2C transactions on the parent I2C adapter at
+      these times:
+       - during setup of the multiplexer
+       - between setup of the multiplexer and the child bus I2C transaction
+       - between the child bus I2C transaction and releasing of the multiplexer
+       - during releasing of the multiplexer
+
+      However, I2C transactions to devices behind all I2C multiplexers connected
+      to the same parent adapter that this multiplexer is connected to are blocked
+      for the full duration of the complete multiplexed I2C transaction (i.e.
+      including the times covered by the above list).
+      If mux-locked is not present, the multiplexer is assumed to be parent-locked.
+      This means that no unrelated I2C transactions are allowed on the parent I2C
+      adapter for the complete multiplexed I2C transaction.
+      The properties of mux-locked and parent-locked multiplexers are discussed
+      in more detail in Documentation/i2c/i2c-topology.rst.
+
+required:
+  - compatible
+  - i2c-parent
+  - mux-controls
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    mux: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+                    <&pioA 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    i2c-mux {
+        compatible = "i2c-mux";
+        mux-locked;
+        i2c-parent = <&i2c1>;
+
+        mux-controls = <&mux>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c@1 {
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@20 {
+                compatible = "nxp,pca9555";
+                gpio-controller;
+                #gpio-cells = <2>;
+                reg = <0x20>;
+            };
+        };
+
+        i2c@3 {
+            reg = <3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@20 {
+                compatible = "nxp,pca9555";
+                gpio-controller;
+                #gpio-cells = <2>;
+                reg = <0x20>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
index 8b1e49cdce3f..29c4550c9782 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
@@ -8,8 +8,8 @@ Required Properties:
 
   The following required properties are defined externally:
 
-  - Standard I2C mux properties. See i2c-mux.txt in this directory.
-  - I2C child bus nodes. See i2c-mux.txt in this directory.
+  - Standard I2C mux properties. See i2c-mux.yaml in this directory.
+  - I2C child bus nodes. See i2c-mux.yaml in this directory.
 
 Optional Properties:
 
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
deleted file mode 100644
index 7abda506b828..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-* NXP PCA954x I2C bus switch
-
-The driver supports NXP PCA954x and PCA984x I2C mux/switch devices.
-
-Required Properties:
-
-  - compatible: Must contain one of the following.
-    "nxp,pca9540",
-    "nxp,pca9542",
-    "nxp,pca9543",
-    "nxp,pca9544",
-    "nxp,pca9545",
-    "nxp,pca9546", "nxp,pca9846",
-    "nxp,pca9547", "nxp,pca9847",
-    "nxp,pca9548", "nxp,pca9848",
-    "nxp,pca9849"
-
-  - reg: The I2C address of the device.
-
-  The following required properties are defined externally:
-
-  - Standard I2C mux properties. See i2c-mux.txt in this directory.
-  - I2C child bus nodes. See i2c-mux.txt in this directory.
-
-Optional Properties:
-
-  - reset-gpios: Reference to the GPIO connected to the reset input.
-  - idle-state: if present, overrides i2c-mux-idle-disconnect,
-    Please refer to Documentation/devicetree/bindings/mux/mux-controller.txt
-  - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
-    children in idle state. This is necessary for example, if there are several
-    multiplexers on the bus and the devices behind them use same I2C addresses.
-  - interrupts: Interrupt mapping for IRQ.
-  - interrupt-controller: Marks the device node as an interrupt controller.
-  - #interrupt-cells : Should be two.
-    - first cell is the pin number
-    - second cell is used to specify flags.
-    See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Example:
-
-	i2c-switch@74 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x74>;
-
-		interrupt-parent = <&ipic>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@54 {
-				compatible = "atmel,24c08";
-				reg = <0x54>;
-			};
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
new file mode 100644
index 000000000000..9f1726d0356b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA954x I2C bus switch
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description:
+  The binding supports NXP PCA954x and PCA984x I2C mux/switch devices.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-mux.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nxp,pca9540
+          - nxp,pca9542
+          - nxp,pca9543
+          - nxp,pca9544
+          - nxp,pca9545
+          - nxp,pca9546
+          - nxp,pca9547
+          - nxp,pca9548
+          - nxp,pca9846
+          - nxp,pca9847
+          - nxp,pca9848
+          - nxp,pca9849
+      - items:
+          - const: nxp,pca9646
+          - const: nxp,pca9546
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  reset-gpios:
+    maxItems: 1
+
+  i2c-mux-idle-disconnect:
+    type: boolean
+    description: Forces mux to disconnect all children in idle state. This is
+      necessary for example, if there are several multiplexers on the bus and
+      the devices behind them use same I2C addresses.
+
+  idle-state:
+    description: if present, overrides i2c-mux-idle-disconnect
+    $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c-mux@74 {
+            compatible = "nxp,pca9548";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0x74>;
+
+            interrupt-parent = <&ipic>;
+            interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+
+            i2c@2 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <2>;
+
+                eeprom@54 {
+                    compatible = "atmel,24c08";
+                    reg = <0x54>;
+                };
+            };
+
+            i2c@4 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <4>;
+
+                rtc@51 {
+                    compatible = "nxp,pcf8563";
+                    reg = <0x51>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
deleted file mode 100644
index 33119a98e144..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Pinctrl-based I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses pin multiplexing to
-route the I2C signals, and represents the pin multiplexing configuration
-using the pinctrl device tree bindings.
-
-                                 +-----+  +-----+
-                                 | dev |  | dev |
-    +------------------------+   +-----+  +-----+
-    | SoC                    |      |        |
-    |                   /----|------+--------+
-    |   +---+   +------+     | child bus A, on first set of pins
-    |   |I2C|---|Pinmux|     |
-    |   +---+   +------+     | child bus B, on second set of pins
-    |                   \----|------+--------+--------+
-    |                        |      |        |        |
-    +------------------------+  +-----+  +-----+  +-----+
-                                | dev |  | dev |  | dev |
-                                +-----+  +-----+  +-----+
-
-Required properties:
-- compatible: i2c-mux-pinctrl
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
-  port is connected to.
-
-Also required are:
-
-* Standard pinctrl properties that specify the pin mux state for each child
-  bus. See ../pinctrl/pinctrl-bindings.txt.
-
-* Standard I2C mux properties. See i2c-mux.txt in this directory.
-
-* I2C child bus nodes. See i2c-mux.txt in this directory.
-
-For each named state defined in the pinctrl-names property, an I2C child bus
-will be created. I2C child bus numbers are assigned based on the index into
-the pinctrl-names property.
-
-The only exception is that no bus will be created for a state named "idle". If
-such a state is defined, it must be the last entry in pinctrl-names. For
-example:
-
-	pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
-	pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
-	pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
-
-Whenever an access is made to a device on a child bus, the relevant pinctrl
-state will be programmed into hardware.
-
-If an idle state is defined, whenever an access is not being made to a device
-on a child bus, the idle pinctrl state will be programmed into hardware.
-
-If an idle state is not defined, the most recently used pinctrl state will be
-left programmed into hardware whenever no access is being made of a device on
-a child bus.
-
-Example:
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&i2c1>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom {
-				compatible = "eeprom";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom {
-				compatible = "eeprom";
-				reg = <0x50>;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml
new file mode 100644
index 000000000000..2e3d555eb96c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pinctrl-based I2C Bus Mux
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+description: |
+  This binding describes an I2C bus multiplexer that uses pin multiplexing to route the I2C
+  signals, and represents the pin multiplexing configuration using the pinctrl device tree
+  bindings.
+
+                                 +-----+  +-----+
+                                 | dev |  | dev |
+    +------------------------+   +-----+  +-----+
+    | SoC                    |      |        |
+    |                   /----|------+--------+
+    |   +---+   +------+     | child bus A, on first set of pins
+    |   |I2C|---|Pinmux|     |
+    |   +---+   +------+     | child bus B, on second set of pins
+    |                   \----|------+--------+--------+
+    |                        |      |        |        |
+    +------------------------+  +-----+  +-----+  +-----+
+                                | dev |  | dev |  | dev |
+                                +-----+  +-----+  +-----+
+
+  For each named state defined in the pinctrl-names property, an I2C child bus will be created.
+  I2C child bus numbers are assigned based on the index into the pinctrl-names property.
+
+  The only exception is that no bus will be created for a state named "idle". If such a state is
+  defined, it must be the last entry in pinctrl-names. For example:
+
+    pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
+    pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
+    pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
+
+  Whenever an access is made to a device on a child bus, the relevant pinctrl state will be
+  programmed into hardware.
+
+  If an idle state is defined, whenever an access is not being made to a device on a child bus,
+  the idle pinctrl state will be programmed into hardware.
+
+  If an idle state is not defined, the most recently used pinctrl state will be left programmed
+  into hardware whenever no access is being made of a device on a child bus.
+
+properties:
+  compatible:
+    const: i2c-mux-pinctrl
+
+  i2c-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the I2C bus that this multiplexer's master-side port is connected
+      to.
+
+allOf:
+  - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - i2c-parent
+
+examples:
+  - |
+    i2cmux {
+      compatible = "i2c-mux-pinctrl";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2c-parent = <&i2c1>;
+
+      pinctrl-names = "ddc", "pta", "idle";
+      pinctrl-0 = <&state_i2cmux_ddc>;
+      pinctrl-1 = <&state_i2cmux_pta>;
+      pinctrl-2 = <&state_i2cmux_idle>;
+
+      i2c@0 {
+        reg = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+
+      i2c@1 {
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt
index de00d7fc450b..b9d9755e4172 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt
@@ -7,8 +7,8 @@ Required properties:
 - compatible: i2c-mux-reg
 - i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
   port is connected to.
-* Standard I2C mux properties. See i2c-mux.txt in this directory.
-* I2C child bus nodes. See i2c-mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.yaml in this directory.
+* I2C child bus nodes. See i2c-mux.yaml in this directory.
 
 Optional properties:
 - reg: this pair of <offset size> specifies the register to control the mux.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux.txt
deleted file mode 100644
index b38f58a1c878..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mux.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-Common i2c bus multiplexer/switch properties.
-
-An i2c bus multiplexer/switch will have several child busses that are
-numbered uniquely in a device dependent manner.  The nodes for an i2c bus
-multiplexer/switch will have one child node for each child bus.
-
-Optional properties:
-- #address-cells = <1>;
-   This property is required if the i2c-mux child node does not exist.
-
-- #size-cells = <0>;
-   This property is required if the i2c-mux child node does not exist.
-
-- i2c-mux
-   For i2c multiplexers/switches that have child nodes that are a mixture
-   of both i2c child busses and other child nodes, the 'i2c-mux' subnode
-   can be used for populating the i2c child busses.  If an 'i2c-mux'
-   subnode is present, only subnodes of this will be considered as i2c
-   child busses.
-
-Required properties for the i2c-mux child node:
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Required properties for i2c child bus nodes:
-- #address-cells = <1>;
-- #size-cells = <0>;
-- reg : The sub-bus number.
-
-Optional properties for i2c child bus nodes:
-- Other properties specific to the multiplexer/switch hardware.
-- Child nodes conforming to i2c bus binding
-
-
-Example :
-
-	/*
-	   An NXP pca9548 8 channel I2C multiplexer at address 0x70
-	   with two NXP pca8574 GPIO expanders attached, one each to
-	   ports 3 and 4.
-	 */
-
-	mux@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			gpio1: gpio@38 {
-				compatible = "nxp,pca8574";
-				reg = <0x38>;
-				#gpio-cells = <2>;
-				gpio-controller;
-			};
-		};
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			gpio2: gpio@38 {
-				compatible = "nxp,pca8574";
-				reg = <0x38>;
-				#gpio-cells = <2>;
-				gpio-controller;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
new file mode 100644
index 000000000000..24cac36037f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common i2c bus multiplexer/switch properties.
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |+
+  An i2c bus multiplexer/switch will have several child busses that are numbered
+  uniquely in a device dependent manner.  The nodes for an i2c bus
+  multiplexer/switch will have one child node for each child bus.
+
+  For i2c multiplexers/switches that have child nodes that are a mixture of both
+  i2c child busses and other child nodes, the 'i2c-mux' subnode can be used for
+  populating the i2c child busses.  If an 'i2c-mux' subnode is present, only
+  subnodes of this will be considered as i2c child busses.
+
+properties:
+  $nodename:
+    pattern: '^(i2c-?)?mux'
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^i2c@[0-9a-f]+$':
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The mux selector sub-bus number for the child I2C bus.
+        maxItems: 1
+
+additionalProperties: true
+
+examples:
+  - |
+    /*
+     * An NXP pca9548 8 channel I2C multiplexer at address 0x70
+     * with two NXP pca8574 GPIO expanders attached, one each to
+     * ports 3 and 4.
+     */
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c-mux@70 {
+            compatible = "nxp,pca9548";
+            reg = <0x70>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            i2c@3 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <3>;
+
+                gpio@20 {
+                    compatible = "nxp,pca9555";
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    reg = <0x20>;
+                };
+            };
+            i2c@4 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <4>;
+
+                gpio@20 {
+                    compatible = "nxp,pca9555";
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    reg = <0x20>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
deleted file mode 100644
index 4e1c8ac01eba..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Freescale MXS Inter IC (I2C) Controller
-
-Required properties:
-- compatible: Should be "fsl,<chip>-i2c"
-- reg: Should contain registers location and length
-- interrupts: Should contain ERROR interrupt number
-- clock-frequency: Desired I2C bus clock frequency in Hz.
-                   Only 100000Hz and 400000Hz modes are supported.
-- dmas: DMA specifier, consisting of a phandle to DMA controller node
-  and I2C DMA channel ID.
-  Refer to dma.txt and fsl-mxs-dma.txt for details.
-- dma-names: Must be "rx-tx".
-
-Examples:
-
-i2c0: i2c@80058000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx28-i2c";
-	reg = <0x80058000 2000>;
-	interrupts = <111>;
-	clock-frequency = <100000>;
-	dmas = <&dma_apbx 6>;
-	dma-names = "rx-tx";
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
new file mode 100644
index 000000000000..21ae7bce038e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mxs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS Inter IC (I2C) Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-i2c
+      - fsl,imx28-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000 ]
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@80058000 {
+        compatible = "fsl,imx28-i2c";
+        reg = <0x80058000 2000>;
+        interrupts = <111>;
+        clock-frequency = <100000>;
+        dmas = <&dma_apbx 6>;
+        dma-names = "rx-tx";
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt b/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
deleted file mode 100644
index 72065b0ff680..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-I2C for Nomadik based systems
-
-Required (non-standard) properties:
- - Nil
-
-Recommended (non-standard) properties:
- - clock-frequency : Maximum bus clock frequency for the device
-
-Optional (non-standard) properties:
- - Nil
-
-Example :
-
-i2c@80004000 {
-        compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-        reg = <0x80004000 0x1000>;
-        interrupts = <0 21 0x4>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-        v-i2c-supply = <&db8500_vape_reg>;
-
-        clock-frequency = <400000>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
deleted file mode 100644
index 6b25a80ae8d3..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-Device tree configuration for i2c-ocores
-
-Required properties:
-- compatible      : "opencores,i2c-ocores"
-                    "aeroflexgaisler,i2cmst"
-                    "sifive,fu540-c000-i2c", "sifive,i2c0"
-                    For Opencore based I2C IP block reimplemented in
-                    FU540-C000 SoC. Please refer to sifive-blocks-ip-versioning.txt
-                    for additional details.
-- reg             : bus address start and address range size of device
-- clocks          : handle to the controller clock; see the note below.
-                    Mutually exclusive with opencores,ip-clock-frequency
-- opencores,ip-clock-frequency: frequency of the controller clock in Hz;
-                    see the note below. Mutually exclusive with clocks
-- #address-cells  : should be <1>
-- #size-cells     : should be <0>
-
-Optional properties:
-- interrupts      : interrupt number.
-- clock-frequency : frequency of bus clock in Hz; see the note below.
-                    Defaults to 100 KHz when the property is not specified
-- reg-shift       : device register offsets are shifted by this value
-- reg-io-width    : io register width in bytes (1, 2 or 4)
-- regstep         : deprecated, use reg-shift above
-
-Note
-clock-frequency property is meant to control the bus frequency for i2c bus
-drivers, but it was incorrectly used to specify i2c controller input clock
-frequency. So the following rules are set to fix this situation:
-- if clock-frequency is present and neither opencores,ip-clock-frequency nor
-  clocks are, then clock-frequency specifies i2c controller clock frequency.
-  This is to keep backwards compatibility with setups using old DTB. i2c bus
-  frequency is fixed at 100 KHz.
-- if clocks is present it specifies i2c controller clock. clock-frequency
-  property specifies i2c bus frequency.
-- if opencores,ip-clock-frequency is present it specifies i2c controller
-  clock frequency. clock-frequency property specifies i2c bus frequency.
-
-Examples:
-
-	i2c0: ocores@a0000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "opencores,i2c-ocores";
-		reg = <0xa0000000 0x8>;
-		interrupts = <10>;
-		opencores,ip-clock-frequency = <20000000>;
-
-		reg-shift = <0>;	/* 8 bit registers */
-		reg-io-width = <1>;	/* 8 bit read/write */
-
-		dummy@60 {
-			compatible = "dummy";
-			reg = <0x60>;
-		};
-	};
-or
-	i2c0: ocores@a0000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "opencores,i2c-ocores";
-		reg = <0xa0000000 0x8>;
-		interrupts = <10>;
-		clocks = <&osc>;
-		clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
-
-		reg-shift = <0>;	/* 8 bit registers */
-		reg-io-width = <1>;	/* 8 bit read/write */
-
-		dummy@60 {
-			compatible = "dummy";
-			reg = <0x60>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
deleted file mode 100644
index a44573d7c118..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-I2C for OMAP platforms
-
-Required properties :
-- compatible : Must be
-	"ti,omap2420-i2c" for OMAP2420 SoCs
-	"ti,omap2430-i2c" for OMAP2430 SoCs
-	"ti,omap3-i2c" for OMAP3 SoCs
-	"ti,omap4-i2c" for OMAP4+ SoCs
-	"ti,am654-i2c", "ti,omap4-i2c" for AM654 SoCs
-	"ti,j721e-i2c", "ti,omap4-i2c" for J721E SoCs
-- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Recommended properties :
-- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise
-  the default 100 kHz frequency will be used.
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
-
-Note: Current implementation will fetch base address, irq and dma
-from omap hwmod data base during device registration.
-Future plan is to migrate hwmod data base contents into device tree
-blob so that, all the required data will be used from device tree dts
-file.
-
-Examples :
-
-i2c1: i2c@0 {
-    compatible = "ti,omap3-i2c";
-    #address-cells = <1>;
-    #size-cells = <0>;
-    ti,hwmods = "i2c1";
-    clock-frequency = <400000>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-owl.txt b/Documentation/devicetree/bindings/i2c/i2c-owl.txt
deleted file mode 100644
index 54c05dbdb2e4..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-owl.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Actions Semiconductor Owl I2C controller
-
-Required properties:
-
-- compatible        : Should be one of the following:
-		      - "actions,s700-i2c" for S700 SoC
-		      - "actions,s900-i2c" for S900 SoC
-- reg               : Offset and length of the register set for the device.
-- #address-cells    : Should be 1.
-- #size-cells       : Should be 0.
-- interrupts        : A single interrupt specifier.
-- clocks            : Phandle of the clock feeding the I2C controller.
-
-Optional properties:
-
-- clock-frequency   : Desired I2C bus clock frequency in Hz. As only Normal and
-                      Fast modes are supported, possible values are 100000 and
-                      400000.
-Examples:
-
-        i2c0: i2c@e0170000 {
-                compatible = "actions,s900-i2c";
-                reg = <0 0xe0170000 0 0x1000>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-                interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&clock CLK_I2C0>;
-                clock-frequency = <100000>;
-        };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-owl.yaml b/Documentation/devicetree/bindings/i2c/i2c-owl.yaml
new file mode 100644
index 000000000000..d96908badf81
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-owl.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-owl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl I2C Controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  This I2C controller is found in the Actions Semi Owl SoCs:
+  S500, S700 and S900.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - actions,s500-i2c # Actions Semi S500 compatible SoCs
+      - actions,s700-i2c # Actions Semi S700 compatible SoCs
+      - actions,s900-i2c # Actions Semi S900 compatible SoCs
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: Phandle of the clock feeding the I2C controller.
+    minItems: 1
+
+  clock-frequency:
+    description: |
+      Desired I2C bus clock frequency in Hz. As only Standard and Fast
+      modes are supported, possible values are 100000 and 400000.
+    enum: [100000, 400000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/actions,s900-cmu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c@e0170000 {
+        compatible = "actions,s900-i2c";
+        reg = <0xe0170000 0x1000>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cmu CLK_I2C0>;
+        clock-frequency = <100000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt
index 569b16248514..1ff6f8487a2d 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt
@@ -71,7 +71,7 @@ This is an example which is used on FalconFalls:
 			/* This I2C controller has one gpio controller */
 			gpio@26 {
 				#gpio-cells = <2>;
-				compatible = "ti,pcf8575";
+				compatible = "nxp,pcf8575";
 				reg = <0x26>;
 				gpio-controller;
 			};
@@ -85,7 +85,7 @@ This is an example which is used on FalconFalls:
 
 			gpio@26 {
 				#gpio-cells = <2>;
-				compatible = "ti,pcf8575";
+				compatible = "nxp,pcf8575";
 				reg = <0x26>;
 				gpio-controller;
 			};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
deleted file mode 100644
index c30783c0eca0..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Marvell MMP I2C controller
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a
-   compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
-   For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
-   as shown in the example below.
-   For the Armada 3700, the compatible should be "marvell,armada-3700-i2c".
-
-Recommended properties :
-
- - interrupts : the interrupt number
- - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
-   status register of i2c controller instead.
- - mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
-
-Examples:
-	twsi1: i2c@d4011000 {
-		compatible = "mrvl,mmp-twsi";
-		reg = <0xd4011000 0x1000>;
-		interrupts = <7>;
-		mrvl,i2c-fast-mode;
-	};
-	
-	twsi2: i2c@d4025000 {
-		compatible = "mrvl,mmp-twsi";
-		reg = <0xd4025000 0x1000>;
-		interrupts = <58>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
new file mode 100644
index 000000000000..015885dd02d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-pxa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP I2C controller bindings
+
+maintainers:
+  - Rob Herring <robh+dt@kernel.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      not:
+        required:
+          - mrvl,i2c-polling
+    then:
+      required:
+        - interrupts
+
+properties:
+  compatible:
+    enum:
+      - mrvl,mmp-twsi
+      - mrvl,pxa-i2c
+      - marvell,armada-3700-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  resets:
+    minItems: 1
+
+  mrvl,i2c-polling:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Disable interrupt of i2c controller. Polling status register of i2c
+      controller instead.
+
+  mrvl,i2c-fast-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enable fast mode of i2c controller.
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2.h>
+    i2c@d4011000 {
+        compatible = "mrvl,mmp-twsi";
+        reg = <0xd4011000 0x1000>;
+        interrupts = <7>;
+        clocks = <&soc_clocks MMP2_CLK_TWSI1>;
+        mrvl,i2c-fast-mode;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
deleted file mode 100644
index 22f2eeb2c4c9..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-* Rockchip RK3xxx I2C controller
-
-This driver interfaces with the native I2C controller present in Rockchip
-RK3xxx SoCs.
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible: should be one of the following:
-   - "rockchip,rv1108-i2c": for rv1108
-   - "rockchip,rk3066-i2c": for rk3066
-   - "rockchip,rk3188-i2c": for rk3188
-   - "rockchip,rk3228-i2c": for rk3228
-   - "rockchip,rk3288-i2c": for rk3288
-   - "rockchip,rk3328-i2c", "rockchip,rk3399-i2c": for rk3328
-   - "rockchip,rk3399-i2c": for rk3399
- - interrupts : interrupt number
- - clocks: See ../clock/clock-bindings.txt
-   - For older hardware (rk3066, rk3188, rk3228, rk3288):
-     - There is one clock that's used both to derive the functional clock
-       for the device and as the bus clock.
-   - For newer hardware (rk3399): specified by name
-     - "i2c": This is used to derive the functional clock.
-     - "pclk": This is the bus clock.
-
-Required on RK3066, RK3188 :
-
- - rockchip,grf : the phandle of the syscon node for the general register
-		  file (GRF)
- - on those SoCs an alias with the correct I2C bus ID (bit offset in the GRF)
-   is also required.
-
-Optional properties :
-
- - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used.
- - i2c-scl-rising-time-ns : Number of nanoseconds the SCL signal takes to rise
-	(t(r) in I2C specification). If not specified this is assumed to be
-	the maximum the specification allows(1000 ns for Standard-mode,
-	300 ns for Fast-mode) which might cause slightly slower communication.
- - i2c-scl-falling-time-ns : Number of nanoseconds the SCL signal takes to fall
-	(t(f) in the I2C specification). If not specified this is assumed to
-	be the maximum the specification allows (300 ns) which might cause
-	slightly slower communication.
- - i2c-sda-falling-time-ns : Number of nanoseconds the SDA signal takes to fall
-	(t(f) in the I2C specification). If not specified we'll use the SCL
-	value since they are the same in nearly all cases.
-
-Example:
-
-aliases {
-	i2c0 = &i2c0;
-}
-
-i2c0: i2c@2002d000 {
-	compatible = "rockchip,rk3188-i2c";
-	reg = <0x2002d000 0x1000>;
-	interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	rockchip,grf = <&grf>;
-
-	clock-names = "i2c";
-	clocks = <&cru PCLK_I2C0>;
-
-	i2c-scl-rising-time-ns = <800>;
-	i2c-scl-falling-time-ns = <100>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
new file mode 100644
index 000000000000..82b9d6682297
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-rk3x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3xxx I2C controller
+
+description:
+  This driver interfaces with the native I2C controller present in Rockchip
+  RK3xxx SoCs.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rv1108-i2c
+      - const: rockchip,rk3066-i2c
+      - const: rockchip,rk3188-i2c
+      - const: rockchip,rk3228-i2c
+      - const: rockchip,rk3288-i2c
+      - const: rockchip,rk3399-i2c
+      - items:
+          - enum:
+              - rockchip,rk3036-i2c
+              - rockchip,rk3128-i2c
+              - rockchip,rk3368-i2c
+          - const: rockchip,rk3288-i2c
+      - items:
+          - enum:
+              - rockchip,px30-i2c
+              - rockchip,rk3308-i2c
+              - rockchip,rk3328-i2c
+              - rockchip,rk3568-i2c
+              - rockchip,rk3588-i2c
+              - rockchip,rv1126-i2c
+          - const: rockchip,rk3399-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description:
+          For older hardware (rk3066, rk3188, rk3228, rk3288)
+          there is one clock that is used both to derive the functional clock
+          for the device and as the bus clock.
+          For newer hardware (rk3399) this clock is used to derive
+          the functional clock
+      - description:
+          For newer hardware (rk3399) this is the bus clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: i2c
+      - const: pclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Required on RK3066, RK3188 the phandle of the syscon node for
+      the general register file (GRF)
+      On those SoCs an alias with the correct I2C bus ID
+      (bit offset in the GRF) is also required.
+
+  clock-frequency:
+    default: 100000
+    description:
+      SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+  i2c-scl-rising-time-ns:
+    default: 1000
+    description:
+      Number of nanoseconds the SCL signal takes to rise
+      (t(r) in I2C specification). If not specified this is assumed to be
+      the maximum the specification allows(1000 ns for Standard-mode,
+      300 ns for Fast-mode) which might cause slightly slower communication.
+
+  i2c-scl-falling-time-ns:
+    default: 300
+    description:
+      Number of nanoseconds the SCL signal takes to fall
+      (t(f) in the I2C specification). If not specified this is assumed to
+      be the maximum the specification allows (300 ns) which might cause
+      slightly slower communication.
+
+  i2c-sda-falling-time-ns:
+    default: 300
+    description:
+      Number of nanoseconds the SDA signal takes to fall
+      (t(f) in the I2C specification). If not specified we will use the SCL
+      value since they are the same in nearly all cases.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3066-i2c
+          - rockchip,rk3188-i2c
+
+then:
+  required:
+    - rockchip,grf
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0: i2c@2002d000 {
+      compatible = "rockchip,rk3188-i2c";
+      reg = <0x2002d000 0x1000>;
+      interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru PCLK_I2C0>;
+      clock-names = "i2c";
+      rockchip,grf = <&grf>;
+      i2c-scl-falling-time-ns = <100>;
+      i2c-scl-rising-time-ns = <800>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
deleted file mode 100644
index 66ae46d3bc2f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Samsung's I2C controller
-
-The Samsung's I2C controller is used to interface with I2C devices.
-
-Required properties:
-  - compatible: value should be either of the following.
-      (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
-      (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
-      (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
-          inside HDMIPHY block found on several samsung SoCs
-      (d) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as
-	   a host to SATA PHY controller on an internal bus.
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-  - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
-
-Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
-  - Samsung GPIO variant (deprecated):
-    - gpios: The order of the gpios should be the following: <SDA, SCL>.
-      The gpio specifier depends on the gpio controller. Required in all
-      cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
-      lines are permanently wired to the respective clienta
-  - Pinctrl variant (preferred, if available):
-    - pinctrl-0: Pin control group to be used for this controller.
-    - pinctrl-names: Should contain only one value - "default".
-
-Optional properties:
-  - samsung,i2c-slave-addr: Slave address in multi-master environment. If not
-    specified, default value is 0.
-  - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
-    specified, the default value in Hz is 100000.
-  - samsung,sysreg-phandle - handle to syscon used to control the system registers
-
-Example:
-
-	i2c@13870000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13870000 0x100>;
-		interrupts = <345>;
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <100000>;
-		/* Samsung GPIO variant begins here */
-		gpios = <&gpd1 2 0 /* SDA */
-			 &gpd1 3 0 /* SCL */>;
-		/* Samsung GPIO variant ends here */
-		/* Pinctrl variant begins here */
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		/* Pinctrl variant ends here */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wm8994@1a {
-			compatible = "wlf,wm8994";
-			reg = <0x1a>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sirf.txt b/Documentation/devicetree/bindings/i2c/i2c-sirf.txt
deleted file mode 100644
index 2701eefb00f7..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-sirf.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-I2C for SiRFprimaII platforms
-
-Required properties :
-- compatible : Must be "sirf,prima2-i2c"
-- reg: physical base address of the controller and length of memory mapped
-     region.
-- interrupts: interrupt number to the cpu.
-
-Optional properties:
-- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
-  The absence of the property indicates the default frequency 100 kHz.
-
-Examples :
-
-i2c0: i2c@b00e0000 {
-    compatible = "sirf,prima2-i2c";
-    reg = <0xb00e0000 0x10000>;
-    interrupts = <24>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-stu300.txt b/Documentation/devicetree/bindings/i2c/i2c-stu300.txt
deleted file mode 100644
index bd81a482634f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-stu300.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-ST Microelectronics DDC I2C
-
-Required properties :
-- compatible : Must be "st,ddci2c"
-- reg: physical base address of the controller and length of memory mapped
-     region.
-- interrupts: interrupt number to the cpu.
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
-
-Examples :
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt
deleted file mode 100644
index 27fc6f8c798b..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-UniPhier I2C controller (FIFO-builtin)
-
-Required properties:
-- compatible: should be "socionext,uniphier-fi2c".
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: phandle to the input clock.
-
-Optional properties:
-- clock-frequency: desired I2C bus frequency in Hz.  The maximum supported
-  value is 400000.  Defaults to 100000 if not specified.
-
-Examples:
-
-	i2c0: i2c@58780000 {
-		compatible = "socionext,uniphier-fi2c";
-		reg = <0x58780000 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 41 4>;
-		clocks = <&i2c_clk>;
-		clock-frequency = <100000>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt
deleted file mode 100644
index 26f9d95b3436..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-UniPhier I2C controller (FIFO-less)
-
-Required properties:
-- compatible: should be "socionext,uniphier-i2c".
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: phandle to the input clock.
-
-Optional properties:
-- clock-frequency: desired I2C bus frequency in Hz.  The maximum supported
-  value is 400000.  Defaults to 100000 if not specified.
-
-Examples:
-
-	i2c0: i2c@58400000 {
-		compatible = "socionext,uniphier-i2c";
-		reg = <0x58400000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 41 1>;
-		clocks = <&i2c_clk>;
-		clock-frequency = <100000>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-versatile.txt b/Documentation/devicetree/bindings/i2c/i2c-versatile.txt
deleted file mode 100644
index 361d31c51b6f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-versatile.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-i2c Controller on ARM Versatile platform:
-
-Required properties:
-- compatible : Must be "arm,versatile-i2c";
-- reg
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
diff --git a/Documentation/devicetree/bindings/i2c/i2c-virtio.yaml b/Documentation/devicetree/bindings/i2c/i2c-virtio.yaml
new file mode 100644
index 000000000000..7d87ed855301
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-virtio.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-virtio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtio I2C Adapter
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - $ref: /schemas/virtio/virtio-device.yaml#
+
+description:
+  Virtio I2C device, see /schemas/virtio/virtio-device.yaml for more details.
+
+properties:
+  $nodename:
+    const: i2c
+
+  compatible:
+    const: virtio,device22
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    virtio@3000 {
+        compatible = "virtio,mmio";
+        reg = <0x3000 0x100>;
+        interrupts = <41>;
+
+        i2c {
+            compatible = "virtio,device22";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            light-sensor@20 {
+                compatible = "dynaimage,al3320a";
+                reg = <0x20>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-xiic.txt b/Documentation/devicetree/bindings/i2c/i2c-xiic.txt
deleted file mode 100644
index caf42e989462..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-xiic.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Xilinx IIC controller:
-
-Required properties:
-- compatible : Must be "xlnx,xps-iic-2.00.a"
-- reg : IIC register location and length
-- interrupts : IIC controller unterrupt
-- #address-cells = <1>
-- #size-cells = <0>
-- clocks: Input clock specifier. Refer to common clock bindings.
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
-- clock-names: Input clock name, should be 'pclk'.
-
-Example:
-
-	axi_iic_0: i2c@40800000 {
-		compatible = "xlnx,xps-iic-2.00.a";
-		clocks = <&clkc 15>;
-		interrupts = < 1 2 >;
-		reg = < 0x40800000 0x10000 >;
-
-		#size-cells = <0>;
-		#address-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt b/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
deleted file mode 100644
index f818ef507ab7..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Device tree configuration for the I2C controller on the XLP9xx/5xx SoC
-
-Required properties:
-- compatible      : should be "netlogic,xlp980-i2c"
-- reg             : bus address start and address range size of device
-- interrupts      : interrupt number
-
-Optional properties:
-- clock-frequency : frequency of bus clock in Hz
-                    Defaults to 100 KHz when the property is not specified
-
-Example:
-
-i2c0: i2c@113100 {
-	compatible = "netlogic,xlp980-i2c";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0 0x113100 0x100>;
-	clock-frequency = <400000>;
-	interrupts = <30>;
-	interrupt-parent = <&pic>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
deleted file mode 100644
index cb806d1ae4c9..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-ZTE zx2967 I2C controller
-
-Required properties:
- - compatible: must be "zte,zx296718-i2c"
- - reg: physical address and length of the device registers
- - interrupts: a single interrupt specifier
- - clocks: clock for the device
- - #address-cells: should be <1>
- - #size-cells: should be <0>
- - clock-frequency: the desired I2C bus clock frequency.
-
-Examples:
-
-	i2c@112000 {
-		compatible = "zte,zx296718-i2c";
-		reg = <0x00112000 0x1000>;
-		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&osc24m>;
-		#address-cells = <1>
-		#size-cells = <0>;
-		clock-frequency = <1600000>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index 9a53df4243c6..fc3dd7ec0445 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -2,32 +2,26 @@ Generic device tree bindings for I2C busses
 ===========================================
 
 This document describes generic bindings which can be used to describe I2C
-busses in a device tree.
+busses and their child devices in a device tree.
 
-Required properties
--------------------
+Required properties (per bus)
+-----------------------------
 
 - #address-cells  - should be <1>. Read more about addresses below.
 - #size-cells     - should be <0>.
-- compatible      - name of I2C bus controller following generic names
-		    recommended practice.
+- compatible      - name of I2C bus controller
 
 For other required properties e.g. to describe register sets,
 clocks, etc. check the binding documentation of the specific driver.
 
 The cells properties above define that an address of children of an I2C bus
-are described by a single value. This is usually a 7 bit address. However,
-flags can be attached to the address. I2C_TEN_BIT_ADDRESS is used to mark a 10
-bit address. It is needed to avoid the ambiguity between e.g. a 7 bit address
-of 0x50 and a 10 bit address of 0x050 which, in theory, can be on the same bus.
-Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we listen to
-be devices ourselves.
+are described by a single value.
 
-Optional properties
--------------------
+Optional properties (per bus)
+-----------------------------
 
 These properties may not be supported by all drivers. However, if a driver
-wants to support one of the below features, it should adapt the bindings below.
+wants to support one of the below features, it should adapt these bindings.
 
 - clock-frequency
 	frequency of bus clock in Hz.
@@ -73,31 +67,76 @@ wants to support one of the below features, it should adapt the bindings below.
 	i2c bus clock frequency (clock-frequency).
 	Specified in Hz.
 
-- interrupts
-	interrupts used by the device.
-
-- interrupt-names
-	"irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
-	other names are	left to individual drivers.
-
-- host-notify
-	device uses SMBus host notify protocol instead of interrupt line.
-
 - multi-master
 	states that there is another master active on this bus. The OS can use
 	this information to adapt power management to keep the arbitration awake
-	all the time, for example.
+	all the time, for example. Can not be combined with 'single-master'.
 
-- wakeup-source
-	device can be used as a wakeup source.
+- pinctrl
+	add extra pinctrl to configure SCL/SDA pins to GPIO function for bus
+	recovery, call it "gpio" or "recovery" (deprecated) state
+
+- scl-gpios
+	specify the gpio related to SCL pin. Used for GPIO bus recovery.
+
+- sda-gpios
+	specify the gpio related to SDA pin. Optional for GPIO bus recovery.
+
+- single-master
+	states that there is no other master active on this bus. The OS can use
+	this information to detect a stalled bus more reliably, for example.
+	Can not be combined with 'multi-master'.
+
+- smbus
+	states that additional SMBus restrictions and features apply to this bus.
+	An example of feature is SMBusHostNotify. Examples of restrictions are
+	more reserved addresses and timeout definitions.
+
+- smbus-alert
+	states that the optional SMBus-Alert feature apply to this bus.
+
+- mctp-controller
+	indicates that the system is accessible via this bus as an endpoint for
+	MCTP over I2C transport.
+
+Required properties (per child device)
+--------------------------------------
+
+- compatible
+	name of I2C slave device
 
 - reg
-	I2C slave addresses
+	One or many I2C slave addresses. These are usually a 7 bit addresses.
+	However, flags can be attached to an address. I2C_TEN_BIT_ADDRESS is
+	used to mark a 10 bit address. It is needed to avoid the ambiguity
+	between e.g. a 7 bit address of 0x50 and a 10 bit address of 0x050
+	which, in theory, can be on the same bus.
+	Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we
+	listen to be devices ourselves.
+
+Optional properties (per child device)
+--------------------------------------
+
+These properties may not be supported by all drivers. However, if a driver
+wants to support one of the below features, it should adapt these bindings.
+
+- host-notify
+	device uses SMBus host notify protocol instead of interrupt line.
+
+- interrupts
+	interrupts used by the device.
+
+- interrupt-names
+	"irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
+	other names are	left to individual drivers.
 
 - reg-names
 	Names of map programmable addresses.
 	It can contain any map needing another address than default one.
 
+- wakeup-source
+	device can be used as a wakeup source.
+
 Binding may contain optional "interrupts" property, describing interrupts
 used by the device. I2C core will assign "irq" interrupt (or the very first
 interrupt if not using interrupt names) as primary interrupt for the slave.
diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
new file mode 100644
index 000000000000..af6d64a6da6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ingenic,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs I2C controller devicetree bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  $nodename:
+    pattern: "^i2c@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4770-i2c
+          - ingenic,x1000-i2c
+      - items:
+          - const: ingenic,jz4780-i2c
+          - const: ingenic,jz4770-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000 ]
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-frequency
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    #include <dt-bindings/dma/jz4780-dma.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c@10054000 {
+      compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      reg = <0x10054000 0x1000>;
+
+      interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+      clocks = <&cgu JZ4780_CLK_SMB4>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pins_i2c4_data>;
+
+      dmas = <&dma JZ4780_DMA_SMB4_RX 0xffffffff>,
+             <&dma JZ4780_DMA_SMB4_TX 0xffffffff>;
+      dma-names = "rx", "tx";
+
+      clock-frequency = <400000>;
+
+      rtc@51 {
+        compatible = "nxp,pcf8563";
+        reg = <0x51>;
+
+        interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
index 2ceb05ba2df5..93c164aa00da 100644
--- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/marvell,mv64xxx-i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MV64XXX I2C Controller Device Tree Bindings
+title: Marvell MV64XXX I2C Controller
 
 maintainers:
   - Gregory CLEMENT <gregory.clement@bootlin.com>
@@ -18,18 +18,22 @@ properties:
           - const: allwinner,sun4i-a10-i2c
       - const: allwinner,sun6i-a31-i2c
       - items:
-          - const: allwinner,sun8i-a23-i2c
+          - enum:
+              - allwinner,sun8i-a23-i2c
+              - allwinner,sun8i-a83t-i2c
+              - allwinner,sun8i-v536-i2c
+              - allwinner,sun50i-a64-i2c
+              - allwinner,sun50i-h6-i2c
           - const: allwinner,sun6i-a31-i2c
-      - items:
-          - const: allwinner,sun8i-a83t-i2c
-          - const: allwinner,sun6i-a31-i2c
-      - items:
-          - const: allwinner,sun50i-a64-i2c
+      - description: Allwinner SoCs with offload support
+        items:
+          - enum:
+              - allwinner,sun20i-d1-i2c
+              - allwinner,sun50i-a100-i2c
+              - allwinner,sun50i-h616-i2c
+              - allwinner,sun50i-r329-i2c
+          - const: allwinner,sun8i-v536-i2c
           - const: allwinner,sun6i-a31-i2c
-      - items:
-          - const: allwinner,sun50i-h6-i2c
-          - const: allwinner,sun6i-a31-i2c
-
       - const: marvell,mv64xxx-i2c
       - const: marvell,mv78230-i2c
       - const: marvell,mv78230-a0-i2c
@@ -47,14 +51,12 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: Reference clock for the I2C bus
       - description: Bus clock (Only for Armada 7K/8K)
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: core
       - const: reg
@@ -64,6 +66,19 @@ properties:
   resets:
     maxItems: 1
 
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+dependencies:
+  dmas: [ dma-names ]
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml b/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml
new file mode 100644
index 000000000000..118ec00fc190
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/mediatek,mt7621-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Stefan Roese <sr@denx.de>
+
+title: Mediatek MT7621/MT7628 I2C master controller
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7621-i2c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: i2c
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: i2c
+
+required:
+  - compatible
+  - reg
+  - resets
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7621-clk.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    i2c: i2c@900 {
+      compatible = "mediatek,mt7621-i2c";
+      reg = <0x900 0x100>;
+      clocks = <&sysc MT7621_CLK_I2C>;
+      clock-names = "i2c";
+      resets = <&sysc MT7621_RST_I2C>;
+      reset-names = "i2c";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pinctrl-names = "default";
+      pinctrl-0 = <&i2c_pins>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
new file mode 100644
index 000000000000..afa3db726229
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/microchip,corei2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS I2C Controller
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,mpfs-i2c # Microchip PolarFire SoC compatible SoCs
+          - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
+      - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      Desired I2C bus clock frequency in Hz. As only Standard and Fast
+      modes are supported, possible values are 100000 and 400000.
+    enum: [100000, 400000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@2010a000 {
+      compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
+      reg = <0x2010a000 0x1000>;
+      clocks = <&clkcfg 15>;
+      interrupt-parent = <&plic>;
+      interrupts = <58>;
+      clock-frequency = <100000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
new file mode 100644
index 000000000000..00eb6ff6f5b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: nuvoton NPCM7XX I2C Controller
+
+description: |
+  I2C bus controllers of the NPCM series support both master and
+  slave mode. Each controller can switch between master and slave at run time
+  (i.e. IPMB mode). HW FIFO for TX and RX are supported.
+
+maintainers:
+  - Tali Perry <tali.perry1@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-i2c
+      - nuvoton,npcm845-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Reference clock for the I2C bus
+
+  clock-frequency:
+    description: Desired I2C bus clock frequency in Hz. If not specified,
+                 the default 100 kHz frequency will be used.
+                 possible values are 100000, 400000 and 1000000.
+    default: 100000
+    enum: [100000, 400000, 1000000]
+
+  nuvoton,sys-mgr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of system manager register node.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nuvoton,npcm845-i2c
+
+    then:
+      required:
+        - nuvoton,sys-mgr
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c0: i2c@80000 {
+        reg = <0x80000 0x1000>;
+        clocks = <&clk NPCM7XX_CLK_APB2>;
+        clock-frequency = <100000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        compatible = "nuvoton,npcm750-i2c";
+        nuvoton,sys-mgr = <&gcr>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
deleted file mode 100644
index ab240e10debc..000000000000
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-NVIDIA Tegra186 BPMP I2C controller
-
-In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW
-devices, such as the I2C controller for the power management I2C bus. Software
-running on other CPUs must perform IPC to the BPMP in order to execute
-transactions on that I2C bus. This binding describes an I2C bus that is
-accessed in such a fashion.
-
-The BPMP I2C node must be located directly inside the main BPMP node. See
-../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding.
-
-This node represents an I2C controller. See ../i2c/i2c.txt for details of the
-core I2C binding.
-
-Required properties:
-- compatible:
-    Array of strings.
-    One of:
-    - "nvidia,tegra186-bpmp-i2c".
-- #address-cells: Address cells for I2C device address.
-    Single-cell integer.
-    Must be <1>.
-- #size-cells:
-    Single-cell integer.
-    Must be <0>.
-- nvidia,bpmp-bus-id:
-    Single-cell integer.
-    Indicates the I2C bus number this DT node represent, as defined by the
-    BPMP firmware.
-
-Example:
-
-bpmp {
-	...
-
-	i2c {
-		compatible = "nvidia,tegra186-bpmp-i2c";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		nvidia,bpmp-bus-id = <5>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
new file mode 100644
index 000000000000..b8319dcf3d8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nvidia,tegra186-bpmp-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) BPMP I2C controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  In Tegra186 and later, the BPMP (Boot and Power Management Processor)
+  owns certain HW devices, such as the I2C controller for the power
+  management I2C bus. Software running on other CPUs must perform IPC to
+  the BPMP in order to execute transactions on that I2C bus. This
+  binding describes an I2C bus that is accessed in such a fashion.
+
+  The BPMP I2C node must be located directly inside the main BPMP node.
+  See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP
+  binding.
+
+  This node represents an I2C controller. See ../i2c/i2c.txt for details
+  of the core I2C binding.
+
+properties:
+  compatible:
+    const: nvidia,tegra186-bpmp-i2c
+
+  nvidia,bpmp-bus-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Indicates the I2C bus number this DT node represents,
+      as defined by the BPMP firmware.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - nvidia,bpmp-bus-id
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
deleted file mode 100644
index f64064f8bdc2..000000000000
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
-
-Required properties:
-- compatible : For Tegra20, must be one of "nvidia,tegra20-i2c-dvc" or
-  "nvidia,tegra20-i2c".  For Tegra30, must be "nvidia,tegra30-i2c".
-  For Tegra114, must be "nvidia,tegra114-i2c".  Otherwise, must be
-  "nvidia,<chip>-i2c", plus at least one of the above, where <chip> is
-  tegra124, tegra132, or tegra210.
-  Details of compatible are as follows:
-  nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
-	controller. This only support master mode of I2C communication. Register
-	interface/offset and interrupts handling are different than generic I2C
-	controller. Driver of DVC I2C controller is only compatible with
-	"nvidia,tegra20-i2c-dvc".
-  nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
-	master and slave mode of I2C communication. The i2c-tegra driver only
-	support master mode of I2C communication. Driver of I2C controller is
-	only compatible with "nvidia,tegra20-i2c".
-  nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
-	very much similar to Tegra20 I2C controller with additional feature:
-	Continue Transfer Support. This feature helps to implement M_NO_START
-	as per I2C core API transfer flags. Driver of I2C controller is
-	compatible with "nvidia,tegra30-i2c" to enable the continue transfer
-	support. This is also compatible with "nvidia,tegra20-i2c" without
-	continue transfer support.
-  nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
-	very much similar to Tegra30 I2C controller with some hardware
-	modification:
-	 - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
-	   fast-clk. Tegra114 has only one clock source called as div-clk and
-	   hence clock mechanism is changed in I2C controller.
-	 - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
-	   default and there is no way to disable it. Tegra114 has this
-	   interrupt disable by default and SW need to enable explicitly.
-	Due to above changes, Tegra114 I2C driver makes incompatible with
-	previous hardware driver. Hence, tegra114 I2C controller is compatible
-	with "nvidia,tegra114-i2c".
-- reg: Should contain I2C controller registers physical address and length.
-- interrupts: Should contain I2C controller interrupts.
-- address-cells: Address cells for I2C device address.
-- size-cells: Size of the I2C device address.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  Tegra20/Tegra30:
-  - div-clk
-  - fast-clk
-  Tegra114:
-  - div-clk
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - i2c
-- dmas: Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names: Must include the following entries:
-  - rx
-  - tx
-
-Example:
-
-	i2c@7000c000 {
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000c000 0x100>;
-		interrupts = <0 38 0x04>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car 12>, <&tegra_car 124>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 12>;
-		reset-names = "i2c";
-		dmas = <&apbdma 16>, <&apbdma 16>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
new file mode 100644
index 000000000000..424a4fc218b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nvidia,tegra20-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+title: NVIDIA Tegra I2C controller driver
+
+properties:
+  compatible:
+    oneOf:
+      - description: Tegra20 has 4 generic I2C controller. This can support
+          master and slave mode of I2C communication. The i2c-tegra driver
+          only support master mode of I2C communication. Driver of I2C
+          controller is only compatible with "nvidia,tegra20-i2c".
+        const: nvidia,tegra20-i2c
+      - description: Tegra20 has specific I2C controller called as DVC I2C
+          controller. This only support master mode of I2C communication.
+          Register interface/offset and interrupts handling are different than
+          generic I2C controller. Driver of DVC I2C controller is only
+          compatible with "nvidia,tegra20-i2c-dvc".
+        const: nvidia,tegra20-i2c-dvc
+      - description: |
+          Tegra30 has 5 generic I2C controller. This controller is very much
+          similar to Tegra20 I2C controller with additional feature: Continue
+          Transfer Support. This feature helps to implement M_NO_START as per
+          I2C core API transfer flags. Driver of I2C controller is compatible
+          with "nvidia,tegra30-i2c" to enable the continue transfer support.
+          This is also compatible with "nvidia,tegra20-i2c" without continue
+          transfer support.
+        items:
+          - const: nvidia,tegra30-i2c
+          - const: nvidia,tegra20-i2c
+      - description: |
+          Tegra114 has 5 generic I2C controllers. This controller is very much
+          similar to Tegra30 I2C controller with some hardware modification:
+            - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk
+              and fast-clk. Tegra114 has only one clock source called as
+              div-clk and hence clock mechanism is changed in I2C controller.
+            - Tegra30/Tegra20 I2C controller has enabled per packet transfer
+              by default and there is no way to disable it. Tegra114 has this
+              interrupt disable by default and SW need to enable explicitly.
+          Due to above changes, Tegra114 I2C driver makes incompatible with
+          previous hardware driver. Hence, Tegra114 I2C controller is
+          compatible with "nvidia,tegra114-i2c".
+        const: nvidia,tegra114-i2c
+      - description: |
+          Tegra124 has 6 generic I2C controllers. These controllers are very
+          similar to those found on Tegra114 but also contain several hardware
+          improvements and new registers.
+        const: nvidia,tegra124-i2c
+      - description: |
+          Tegra210 has 6 generic I2C controllers. These controllers are very
+          similar to those found on Tegra124.
+        items:
+          - const: nvidia,tegra210-i2c
+          - const: nvidia,tegra124-i2c
+      - description: |
+          Tegra210 has one I2C controller that is on host1x bus and is part of
+          the VE power domain and typically used for camera use-cases. This VI
+          I2C controller is mostly compatible with the programming model of
+          the regular I2C controllers with a few exceptions. The I2C registers
+          start at an offset of 0xc00 (instead of 0), registers are 16 bytes
+          apart (rather than 4) and the controller does not support slave
+          mode.
+        const: nvidia,tegra210-i2c-vi
+      - description: |
+          Tegra186 has 9 generic I2C controllers, two of which are in the AON
+          (always-on) partition of the SoC. All of these controllers are very
+          similar to those found on Tegra210.
+        const: nvidia,tegra186-i2c
+      - description: |
+          Tegra194 has 8 generic I2C controllers, two of which are in the AON
+          (always-on) partition of the SoC. All of these controllers are very
+          similar to those found on Tegra186. However, these controllers have
+          support for 64 KiB transactions whereas earlier chips supported no
+          more than 4 KiB per transactions.
+        const: nvidia,tegra194-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: i2c
+
+  dmas:
+    items:
+      - description: DMA channel for the reception FIFO
+      - description: DMA channel for the transmission FIFO
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-i2c
+              - nvidia,tegra30-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+            - const: fast-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra114-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-i2c-vi
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+            - const: slow
+        power-domains:
+          items:
+            - description: phandle to the VENC power domain
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@7000c000 {
+        compatible = "nvidia,tegra20-i2c";
+        reg = <0x7000c000 0x100>;
+        interrupts = <0 38 0x04>;
+        clocks = <&tegra_car 12>, <&tegra_car 124>;
+        clock-names = "div-clk", "fast-clk";
+        resets = <&tegra_car 12>;
+        reset-names = "i2c";
+        dmas = <&apbdma 16>, <&apbdma 16>;
+        dma-names = "rx", "tx";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
new file mode 100644
index 000000000000..85d9efb743ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/opencores,i2c-ocores.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenCores I2C controller
+
+maintainers:
+  - Peter Korsgaard <peter@korsgaard.com>
+  - Andrew Lunn <andrew@lunn.ch>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sifive,fu740-c000-i2c # Opencore based IP block FU740-C000 SoC
+              - sifive,fu540-c000-i2c # Opencore based IP block FU540-C000 SoC
+          - const: sifive,i2c0
+      - enum:
+          - opencores,i2c-ocores
+          - aeroflexgaisler,i2cmst
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      clock-frequency property is meant to control the bus frequency for i2c bus
+      drivers, but it was incorrectly used to specify i2c controller input clock
+      frequency. So the following rules are set to fix this situation:
+      - if clock-frequency is present and neither opencores,ip-clock-frequency nor
+        clocks are, then clock-frequency specifies i2c controller clock frequency.
+        This is to keep backwards compatibility with setups using old DTB. i2c bus
+        frequency is fixed at 100 KHz.
+      - if clocks is present it specifies i2c controller clock. clock-frequency
+        property specifies i2c bus frequency.
+      - if opencores,ip-clock-frequency is present it specifies i2c controller
+        clock frequency. clock-frequency property specifies i2c bus frequency.
+    default: 100000
+
+  reg-io-width:
+    description: |
+      io register width in bytes
+    enum: [1, 2, 4]
+
+  reg-shift:
+    description: |
+      device register offsets are shifted by this value
+    default: 0
+
+  regstep:
+    description: |
+      deprecated, use reg-shift above
+    deprecated: true
+
+  opencores,ip-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Frequency of the controller clock in Hz. Mutually exclusive with clocks.
+      See the note above.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+oneOf:
+  - required:
+      - opencores,ip-clock-frequency
+  - required:
+      - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@a0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      opencores,ip-clock-frequency = <20000000>;
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+
+    i2c@b0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      clocks = <&osc>;
+      clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
new file mode 100644
index 000000000000..cf9f8fda595f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-cci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Control Interface (CCI) I2C controller
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+  - Robert Foss <robert.foss@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8226-cci
+      - qcom,msm8916-cci
+      - qcom,msm8974-cci
+      - qcom,msm8996-cci
+      - qcom,sdm845-cci
+      - qcom,sm8250-cci
+      - qcom,sm8450-cci
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    minItems: 3
+    maxItems: 6
+
+  clock-names:
+    minItems: 3
+    maxItems: 6
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^i2c-bus@[01]$":
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clock-frequency:
+        default: 100000
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-cci
+    then:
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-cci
+              - qcom,msm8916-cci
+    then:
+      properties:
+        i2c-bus@1: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-cci
+              - qcom,msm8974-cci
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: camss_top_ahb
+            - const: cci_ahb
+            - const: cci
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8916-cci
+              - qcom,msm8996-cci
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: camss_top_ahb
+            - const: cci_ahb
+            - const: cci
+            - const: camss_ahb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-cci
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: soc_ahb
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+            - const: cci_src
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8250-cci
+              - qcom,sm8450-cci
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+            - const: cci_src
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cci@ac4a000 {
+        reg = <0x0ac4a000 0x4000>;
+        compatible = "qcom,sdm845-cci";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+        power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+        clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                 <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+                 <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                 <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+                 <&clock_camcc CAM_CC_CCI_CLK>,
+                 <&clock_camcc CAM_CC_CCI_CLK_SRC>;
+        clock-names = "camnoc_axi",
+                      "soc_ahb",
+                      "slow_ahb_src",
+                      "cpas_ahb",
+                      "cci",
+                      "cci_src";
+
+        assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                          <&clock_camcc CAM_CC_CCI_CLK>;
+        assigned-clock-rates = <80000000>,
+                               <37500000>;
+
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&cci0_default &cci1_default>;
+        pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+        i2c-bus@0 {
+            reg = <0>;
+            clock-frequency = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            camera@10 {
+                compatible = "ovti,ov8856";
+                reg = <0x10>;
+
+                reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&cam0_default>;
+
+                clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+                clock-names = "xvclk";
+                clock-frequency = <19200000>;
+
+                dovdd-supply = <&vreg_lvs1a_1p8>;
+                avdd-supply = <&cam0_avdd_2v8>;
+                dvdd-supply = <&cam0_dvdd_1v2>;
+
+                port {
+                    ov8856_ep: endpoint {
+                        link-frequencies = /bits/ 64 <360000000 180000000>;
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csiphy0_ep>;
+                    };
+                };
+            };
+        };
+
+        cci_i2c1: i2c-bus@1 {
+            reg = <1>;
+            clock-frequency = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            camera@60 {
+                compatible = "ovti,ov7251";
+                reg = <0x60>;
+
+                enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&cam3_default>;
+
+                clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
+                clock-names = "xclk";
+                clock-frequency = <24000000>;
+
+                vdddo-supply = <&vreg_lvs1a_1p8>;
+                vdda-supply = <&cam3_avdd_2v8>;
+
+                port {
+                    ov7251_ep: endpoint {
+                        data-lanes = <0 1>;
+                        remote-endpoint = <&csiphy3_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
new file mode 100644
index 000000000000..0e7ed00562e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Geni based QUP I2C Controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: qcom,geni-i2c
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: se
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    items:
+      - const: qup-core
+      - const: qup-config
+      - const: qup-memory
+
+  interrupts:
+    maxItems: 1
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - clocks
+  - clock-names
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    i2c@88000 {
+        compatible = "qcom,geni-i2c";
+        reg = <0x00880000 0x4000>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_i2c0_default>;
+        interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+                        <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "qup-core", "qup-config", "qup-memory";
+        power-domains = <&rpmhpd SC7180_CX>;
+        required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
deleted file mode 100644
index dc71754a56af..000000000000
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Qualcomm Universal Peripheral (QUP) I2C controller
-
-Required properties:
- - compatible: Should be:
-   * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
-   * "qcom,i2c-qup-v2.1.1" for 8974 v1.
-   * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
- - reg: Should contain QUP register address and length.
- - interrupts: Should contain I2C interrupt.
-
- - clocks: A list of phandles + clock-specifiers, one for each entry in
-   clock-names.
- - clock-names: Should contain:
-   * "core" for the core clock
-   * "iface" for the AHB clock
-
- - #address-cells: Should be <1> Address cells for i2c device address
- - #size-cells: Should be <0> as i2c addresses have no size component
-
-Optional properties:
- - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
-                    defaults to 100kHz if omitted.
-
-Child nodes should conform to i2c bus binding.
-
-Example:
-
- i2c@f9924000 {
- 	compatible = "qcom,i2c-qup-v2.2.1";
- 	reg = <0xf9924000 0x1000>;
- 	interrupts = <0 96 0>;
-
- 	clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- 	clock-names = "core", "iface";
-
- 	clock-frequency = <355000>;
-
- 	#address-cells = <1>;
- 	#size-cells = <0>;
- };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml
new file mode 100644
index 000000000000..f43947514d48
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-qup.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Peripheral (QUP) I2C controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,i2c-qup-v1.1.1     # for 8660, 8960 and 8064
+      - qcom,i2c-qup-v2.1.1     # for 8974 v1
+      - qcom,i2c-qup-v2.2.1     # for 8974 v2 and later
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@c175000 {
+        compatible = "qcom,i2c-qup-v2.2.1";
+        reg = <0x0c175000 0x600>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+                 <&gcc GCC_BLSP1_AHB_CLK>;
+        clock-names = "core", "iface";
+        dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+        dma-names = "tx", "rx";
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&blsp1_i2c1_default>;
+        pinctrl-1 = <&blsp1_i2c1_sleep>;
+        clock-frequency = <400000>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
deleted file mode 100644
index c359965d0724..000000000000
--- a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-I2C for R-Car platforms
-
-Required properties:
-- compatible:
-	"renesas,i2c-r8a7743" if the device is a part of a R8A7743 SoC.
-	"renesas,i2c-r8a7744" if the device is a part of a R8A7744 SoC.
-	"renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
-	"renesas,i2c-r8a77470" if the device is a part of a R8A77470 SoC.
-	"renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC.
-	"renesas,i2c-r8a774b1" if the device is a part of a R8A774B1 SoC.
-	"renesas,i2c-r8a774c0" if the device is a part of a R8A774C0 SoC.
-	"renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
-	"renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.
-	"renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC.
-	"renesas,i2c-r8a7791" if the device is a part of a R8A7791 SoC.
-	"renesas,i2c-r8a7792" if the device is a part of a R8A7792 SoC.
-	"renesas,i2c-r8a7793" if the device is a part of a R8A7793 SoC.
-	"renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC.
-	"renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC.
-	"renesas,i2c-r8a7796" if the device is a part of a R8A77960 SoC.
-	"renesas,i2c-r8a77961" if the device is a part of a R8A77961 SoC.
-	"renesas,i2c-r8a77965" if the device is a part of a R8A77965 SoC.
-	"renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC.
-	"renesas,i2c-r8a77980" if the device is a part of a R8A77980 SoC.
-	"renesas,i2c-r8a77990" if the device is a part of a R8A77990 SoC.
-	"renesas,i2c-r8a77995" if the device is a part of a R8A77995 SoC.
-	"renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
-	"renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible
-				device.
-	"renesas,rcar-gen3-i2c" for a generic R-Car Gen3 or RZ/G2 compatible
-				device.
-	"renesas,i2c-rcar" (deprecated)
-
-	When compatible with the generic version, nodes must list the
-	SoC-specific version corresponding to the platform first followed
-	by the generic version.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: interrupt specifier.
-
-Optional properties:
-- clock-frequency: desired I2C bus clock frequency in Hz. The absence of this
-  property indicates the default frequency 100 kHz.
-- clocks: clock specifier.
-- dmas: Must contain a list of two references to DMA specifiers, one for
-  transmission, and one for reception.
-- dma-names: Must contain a list of two DMA names, "tx" and "rx".
-
-- i2c-scl-falling-time-ns: see i2c.txt
-- i2c-scl-internal-delay-ns: see i2c.txt
-- i2c-scl-rising-time-ns: see i2c.txt
-
-Examples :
-
-i2c0: i2c@e6508000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
-	reg = <0 0xe6508000 0 0x40>;
-	interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
-	clock-frequency = <400000>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt
deleted file mode 100644
index 5ed1ea1c7e14..000000000000
--- a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Device tree configuration for Renesas EMEV2 IIC controller
-
-Required properties:
-- compatible      : "renesas,iic-emev2"
-- reg             : address start and address range size of device
-- interrupts      : specifier for the IIC controller interrupt
-- clocks          : phandle to the IP core SCLK
-- clock-names     : must be "sclk"
-- #address-cells  : should be <1>
-- #size-cells     : should be <0>
-
-Example:
-
-	iic0: i2c@e0070000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-emev2";
-		reg = <0xe0070000 0x28>;
-		interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&iic0_sclk>;
-		clock-names = "sclk";
-	};
diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
new file mode 100644
index 000000000000..17c1102562be
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,iic-emev2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas EMMA Mobile EV2 IIC Interface
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: renesas,iic-emev2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: sclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    iic0: i2c@e0070000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "renesas,iic-emev2";
+            reg = <0xe0070000 0x28>;
+            interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&iic0_sclk>;
+            clock-names = "sclk";
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic.txt b/Documentation/devicetree/bindings/i2c/renesas,iic.txt
deleted file mode 100644
index ffe085c9947e..000000000000
--- a/Documentation/devicetree/bindings/i2c/renesas,iic.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-Device tree configuration for Renesas IIC (sh_mobile) driver
-
-Required properties:
-- compatible      :
-			- "renesas,iic-r8a73a4" (R-Mobile APE6)
-			- "renesas,iic-r8a7740" (R-Mobile A1)
-			- "renesas,iic-r8a7743" (RZ/G1M)
-			- "renesas,iic-r8a7744" (RZ/G1N)
-			- "renesas,iic-r8a7745" (RZ/G1E)
-			- "renesas,iic-r8a774a1" (RZ/G2M)
-			- "renesas,iic-r8a774b1" (RZ/G2N)
-			- "renesas,iic-r8a774c0" (RZ/G2E)
-			- "renesas,iic-r8a7790" (R-Car H2)
-			- "renesas,iic-r8a7791" (R-Car M2-W)
-			- "renesas,iic-r8a7792" (R-Car V2H)
-			- "renesas,iic-r8a7793" (R-Car M2-N)
-			- "renesas,iic-r8a7794" (R-Car E2)
-			- "renesas,iic-r8a7795" (R-Car H3)
-			- "renesas,iic-r8a7796" (R-Car M3-W)
-			- "renesas,iic-r8a77961" (R-Car M3-W+)
-			- "renesas,iic-r8a77965" (R-Car M3-N)
-			- "renesas,iic-r8a77990" (R-Car E3)
-			- "renesas,iic-sh73a0" (SH-Mobile AG5)
-			- "renesas,rcar-gen2-iic" (generic R-Car Gen2 or RZ/G1
-							compatible device)
-			- "renesas,rcar-gen3-iic" (generic R-Car Gen3 or RZ/G2
-							compatible device)
-			- "renesas,rmobile-iic" (generic device)
-
-			When compatible with a generic R-Car version, nodes
-			must list the SoC-specific version corresponding to
-			the platform first followed by the generic R-Car
-			version.
-
-			When compatible with "renesas,rmobile-iic" it should
-			be the last compatibility string listed.
-
-			The r8a77990 (R-Car E3) and r8a774c0 (RZ/G2E)
-			controllers are not considered compatible with
-			"renesas,rcar-gen3-iic" or "renesas,rmobile-iic"
-			due to the absence of automatic transmission registers.
-
-- reg             : address start and address range size of device
-- interrupts      : interrupt of device
-- clocks          : clock for device
-- #address-cells  : should be <1>
-- #size-cells     : should be <0>
-
-Optional properties:
-- clock-frequency : frequency of bus clock in Hz. Default 100kHz if unset.
-- dmas            : Must contain a list of two references to DMA
-		    specifiers, one for transmission, and one for
-		    reception.
-- dma-names       : Must contain a list of two DMA names, "tx" and "rx".
-
-
-Pinctrl properties might be needed, too. See there.
-
-Example:
-
-	iic0: i2c@e6500000 {
-		compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
-			     "renesas,rmobile-iic";
-		reg = <0 0xe6500000 0 0x425>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
-		clock-frequency = <400000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
new file mode 100644
index 000000000000..c4ace5585e1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,rcar-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car I2C Controller
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,i2c-r8a7778      # R-Car M1A
+              - renesas,i2c-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-i2c # R-Car Gen1
+
+      - items:
+          - enum:
+              - renesas,i2c-r8a7742      # RZ/G1H
+              - renesas,i2c-r8a7743      # RZ/G1M
+              - renesas,i2c-r8a7744      # RZ/G1N
+              - renesas,i2c-r8a7745      # RZ/G1E
+              - renesas,i2c-r8a77470     # RZ/G1C
+              - renesas,i2c-r8a7790      # R-Car H2
+              - renesas,i2c-r8a7791      # R-Car M2-W
+              - renesas,i2c-r8a7792      # R-Car V2H
+              - renesas,i2c-r8a7793      # R-Car M2-N
+              - renesas,i2c-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-i2c # R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,i2c-r8a774a1     # RZ/G2M
+              - renesas,i2c-r8a774b1     # RZ/G2N
+              - renesas,i2c-r8a774c0     # RZ/G2E
+              - renesas,i2c-r8a774e1     # RZ/G2H
+              - renesas,i2c-r8a7795      # R-Car H3
+              - renesas,i2c-r8a7796      # R-Car M3-W
+              - renesas,i2c-r8a77961     # R-Car M3-W+
+              - renesas,i2c-r8a77965     # R-Car M3-N
+              - renesas,i2c-r8a77970     # R-Car V3M
+              - renesas,i2c-r8a77980     # R-Car V3H
+              - renesas,i2c-r8a77990     # R-Car E3
+              - renesas,i2c-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-i2c # R-Car Gen3 and RZ/G2
+
+      - items:
+          - enum:
+              - renesas,i2c-r8a779a0     # R-Car V3U
+              - renesas,i2c-r8a779f0     # R-Car S4-8
+              - renesas,i2c-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-i2c # R-Car Gen4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    description:
+      Desired I2C bus clock frequency in Hz. The absence of this property
+      indicates the default frequency 100 kHz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+  i2c-scl-falling-time-ns:
+    default: 35
+    description:
+      Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C
+      specification.
+
+  i2c-scl-internal-delay-ns:
+    default: 50
+    description:
+      Number of nanoseconds the IP core additionally needs to setup SCL.
+
+  i2c-scl-rising-time-ns:
+    default: 200
+    description:
+      Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C
+      specification.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen1-i2c
+              - renesas,rcar-gen2-i2c
+    then:
+      properties:
+        dmas: false
+        dma-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-i2c
+              - renesas,rcar-gen3-i2c
+              - renesas,rcar-gen4-i2c
+    then:
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    i2c0: i2c@e6508000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
+            reg = <0xe6508000 0x40>;
+            interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+            clock-frequency = <400000>;
+            clocks = <&cpg CPG_MOD 931>;
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 931>;
+            i2c-scl-internal-delay-ns = <6>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.txt b/Documentation/devicetree/bindings/i2c/renesas,riic.txt
deleted file mode 100644
index e26fe3ad86a9..000000000000
--- a/Documentation/devicetree/bindings/i2c/renesas,riic.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Device tree configuration for Renesas RIIC driver
-
-Required properties:
-- compatible      :
-	"renesas,riic-r7s72100" if the device is a part of a R7S72100 SoC.
-	"renesas,riic-r7s9210" if the device is a part of a R7S9210 SoC.
-	"renesas,riic-rz" for a generic RZ/A compatible device.
-- reg             : address start and address range size of device
-- interrupts      : 8 interrupts (TEI, RI, TI, SPI, STI, NAKI, ALI, TMOI)
-- clock-frequency : frequency of bus clock in Hz
-- #address-cells  : should be <1>
-- #size-cells     : should be <0>
-
-Pinctrl properties might be needed, too. See there.
-
-Example:
-
-	i2c0: i2c@fcfee000 {
-		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-		reg = <0xfcfee000 0x44>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 158 IRQ_TYPE_EDGE_RISING>,
-			     <0 159 IRQ_TYPE_EDGE_RISING>,
-			     <0 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 164 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <100000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
new file mode 100644
index 000000000000..d3c0d5c427ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,riic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A and RZ/G2L I2C Bus Interface (RIIC)
+
+maintainers:
+  - Chris Brandt <chris.brandt@renesas.com>
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,riic-r7s72100   # RZ/A1H
+          - renesas,riic-r7s9210    # RZ/A2M
+          - renesas,riic-r9a07g043  # RZ/G2UL
+          - renesas,riic-r9a07g044  # RZ/G2{L,LC}
+          - renesas,riic-r9a07g054  # RZ/V2L
+      - const: renesas,riic-rz      # RZ/A or RZ/G2L
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Transmit End Interrupt
+      - description: Receive Data Full Interrupt
+      - description: Transmit Data Empty Interrupt
+      - description: Stop Condition Detection Interrupt
+      - description: Start Condition Detection Interrupt
+      - description: NACK Reception Interrupt
+      - description: Arbitration-Lost Interrupt
+      - description: Timeout Interrupt
+
+  interrupt-names:
+    items:
+      - const: tei
+      - const: ri
+      - const: ti
+      - const: spi
+      - const: sti
+      - const: naki
+      - const: ali
+      - const: tmoi
+
+  clock-frequency:
+    description:
+      Desired I2C bus clock frequency in Hz. The absence of this property
+      indicates the default frequency 100 kHz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-frequency
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,riic-r9a07g043
+          - renesas,riic-r9a07g044
+          - renesas,riic-r9a07g054
+then:
+  required:
+    - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r7s72100-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c0: i2c@fcfee000 {
+            compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+            reg = <0xfcfee000 0x44>;
+            interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
+                              "tmoi";
+            clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+            clock-frequency = <100000>;
+            power-domains = <&cpg_clocks>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
new file mode 100644
index 000000000000..04e4ffd80bc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,rmobile-iic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Mobile I2C Bus Interface (IIC)
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,iic-r8a73a4      # R-Mobile APE6
+              - renesas,iic-r8a7740      # R-Mobile A1
+              - renesas,iic-sh73a0       # SH-Mobile AG5
+          - const: renesas,rmobile-iic   # Generic
+
+      - items:
+          - enum:
+              - renesas,iic-r8a7742      # RZ/G1H
+              - renesas,iic-r8a7743      # RZ/G1M
+              - renesas,iic-r8a7744      # RZ/G1N
+              - renesas,iic-r8a7745      # RZ/G1E
+              - renesas,iic-r8a7790      # R-Car H2
+              - renesas,iic-r8a7791      # R-Car M2-W
+              - renesas,iic-r8a7792      # R-Car V2H
+              - renesas,iic-r8a7793      # R-Car M2-N
+              - renesas,iic-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-iic # R-Car Gen2 and RZ/G1
+          - const: renesas,rmobile-iic   # Generic
+
+      - items:
+          - enum:
+              - renesas,iic-r8a774a1     # RZ/G2M
+              - renesas,iic-r8a774b1     # RZ/G2N
+              - renesas,iic-r8a774c0     # RZ/G2E
+              - renesas,iic-r8a774e1     # RZ/G2H
+              - renesas,iic-r8a7795      # R-Car H3
+              - renesas,iic-r8a7796      # R-Car M3-W
+              - renesas,iic-r8a77961     # R-Car M3-W+
+              - renesas,iic-r8a77965     # R-Car M3-N
+              - renesas,iic-r8a77990     # R-Car E3
+          - const: renesas,rcar-gen3-iic # R-Car Gen3 and RZ/G2
+          - const: renesas,rmobile-iic   # Generic
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+  clock-frequency:
+    description:
+      Desired I2C bus clock frequency in Hz. The absence of this property
+      indicates the default frequency 100 kHz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,iic-r8a7740
+              - renesas,iic-sh73a0
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Arbitration Lost Interrupt (ALI)
+            - description: Non-acknowledge Detection Interrupt (TACKI)
+            - description: Wait Interrupt (WAITI)
+            - description: Data Transmit Enable interrupt (DTEI)
+    else:
+      properties:
+        interrupts:
+          items:
+            - description: Single combined interrupt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-iic
+              - renesas,rcar-gen3-iic
+    then:
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    iic0: i2c@e6500000 {
+            compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+                         "renesas,rmobile-iic";
+            reg = <0xe6500000 0x425>;
+            interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 318>;
+            clock-frequency = <400000>;
+            dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
+            dma-names = "tx", "rx", "tx", "rx";
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 318>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
new file mode 100644
index 000000000000..c46378efc123
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,rzv2m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M I2C Bus Interface
+
+maintainers:
+  - Phil Edworthy <phil.edworthy@renesas.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,i2c-r9a09g011  # RZ/V2M
+      - const: renesas,rzv2m-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Data transmission/reception interrupt
+      - description: Status interrupt
+
+  interrupt-names:
+    items:
+      - const: tia
+      - const: tis
+
+  clock-frequency:
+    default: 100000
+    enum: [ 100000, 400000 ]
+    description:
+      Desired I2C bus clock frequency in Hz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - power-domains
+  - resets
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a09g011-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c0: i2c@a4030000 {
+        compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+        reg = <0xa4030000 0x80>;
+        interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "tia", "tis";
+        clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK0>;
+        resets = <&cpg R9A09G011_IIC_GPA_PRESETN>;
+        power-domains = <&cpg>;
+        clock-frequency = <100000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
new file mode 100644
index 000000000000..3d5782deb97d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/samsung,s3c2410-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC I2C Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2410-i2c
+      - samsung,s3c2440-i2c
+        # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
+      - samsung,s3c2440-hdmiphy-i2c
+        # For s3c2440-like I2C used as a host to SATA PHY controller on an
+        # internal bus:
+      - samsung,exynos5-sata-phy-i2c
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: i2c
+
+  gpios:
+    description: |
+      The order of the GPIOs should be the following:: <SDA, SCL>.  The GPIO
+      specifier depends on the gpio controller. Required in all cases except
+      for "samsung,s3c2440-hdmiphy-i2c" whose input/output lines are
+      permanently wired to the respective client.
+      This property is deprecated. Use "pinctrl-0" and "pinctrl-names" instead.
+    deprecated: yes
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,i2c-max-bus-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Desired frequency in Hz of the bus.
+    default: 100000
+
+  samsung,i2c-sda-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Delay (in ns) applied to data line (SDA) edges.
+    default: 0
+
+  samsung,i2c-slave-addr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Slave address in multi-master environment.
+    default: 0
+
+  samsung,sysreg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Pandle to syscon used to control the system registers.
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2440-hdmiphy-i2c
+              - samsung,exynos5-sata-phy-i2c
+    then:
+      properties:
+        gpios: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-i2c
+              - samsung,s3c2440-i2c
+              - samsung,s3c2440-hdmiphy-i2c
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@12c60000 {
+        compatible = "samsung,s3c2440-i2c";
+        reg = <0x12C60000 0x100>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_I2C0>;
+        clock-names = "i2c";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2c0_bus>;
+
+        samsung,sysreg-phandle = <&sysreg_system_controller>;
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <20000>;
+        samsung,i2c-slave-addr = <0x66>;
+
+        eeprom@50 {
+            compatible = "samsung,s524ad0xd1", "atmel,24c128";
+            reg = <0x50>;
+        };
+    };
+
+    i2c@12ce0000 {
+        compatible = "samsung,s3c2440-hdmiphy-i2c";
+        reg = <0x12CE0000 0x1000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_I2C_HDMI>;
+        clock-names = "i2c";
+
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <66000>;
+
+        phy-i2c@38 {
+            compatible = "samsung,exynos4212-hdmiphy";
+            reg = <0x38>;
+        };
+    };
+
+    i2c@121d0000 {
+        compatible = "samsung,exynos5-sata-phy-i2c";
+        reg = <0x121D0000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_SATA_PHYI2C>;
+        clock-names = "i2c";
+
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <40000>;
+
+        phy-i2c@38 {
+            compatible = "samsung,exynos-sataphy-i2c";
+            reg = <0x38>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
new file mode 100644
index 000000000000..d9293c57f573
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/snps,designware-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare APB I2C Controller
+
+maintainers:
+  - Jarkko Nikula <jarkko.nikula@linux.intel.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: mscc,ocelot-i2c
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+properties:
+  compatible:
+    oneOf:
+      - description: Generic Synopsys DesignWare I2C controller
+        const: snps,designware-i2c
+      - description: Microsemi Ocelot SoCs I2C controller
+        items:
+          - const: mscc,ocelot-i2c
+          - const: snps,designware-i2c
+      - description: Baikal-T1 SoC System I2C controller
+        const: baikal,bt1-sys-i2c
+
+  reg:
+    minItems: 1
+    items:
+      - description: DW APB I2C controller memory mapped registers
+      - description: |
+          ICPU_CFG:TWI_DELAY registers to setup the SDA hold time.
+          This registers are specific to the Ocelot I2C-controller.
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: I2C controller reference clock source
+      - description: APB interface clock source
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ref
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    description: Desired I2C bus clock frequency in Hz
+    enum: [100000, 400000, 1000000, 3400000]
+    default: 400000
+
+  i2c-sda-hold-time-ns:
+    description: |
+      The property should contain the SDA hold time in nanoseconds. This option
+      is only supported in hardware blocks version 1.11a or newer or on
+      Microsemi SoCs.
+
+  i2c-scl-falling-time-ns:
+    description: |
+      The property should contain the SCL falling time in nanoseconds.
+      This value is used to compute the tLOW period.
+    default: 300
+
+  i2c-sda-falling-time-ns:
+    description: |
+      The property should contain the SDA falling time in nanoseconds.
+      This value is used to compute the tHIGH period.
+    default: 300
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    i2c@f0000 {
+      compatible = "snps,designware-i2c";
+      reg = <0xf0000 0x1000>;
+      interrupts = <11>;
+      clock-frequency = <400000>;
+    };
+  - |
+    i2c@1120000 {
+      compatible = "snps,designware-i2c";
+      reg = <0x1120000 0x1000>;
+      interrupts = <12 1>;
+      clock-frequency = <400000>;
+      i2c-sda-hold-time-ns = <300>;
+      i2c-sda-falling-time-ns = <300>;
+      i2c-scl-falling-time-ns = <300>;
+    };
+  - |
+    i2c@2000 {
+      compatible = "snps,designware-i2c";
+      reg = <0x2000 0x100>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clock-frequency = <400000>;
+      clocks = <&i2cclk>;
+      interrupts = <0>;
+
+      eeprom@64 {
+        compatible = "atmel,24c02";
+        reg = <0x64>;
+      };
+    };
+  - |
+    i2c@100400 {
+      compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+      reg = <0x100400 0x100>, <0x198 0x8>;
+      pinctrl-0 = <&i2c_pins>;
+      pinctrl-names = "default";
+      interrupts = <8>;
+      clocks = <&ahb_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
new file mode 100644
index 000000000000..c76131902b77
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/socionext,uniphier-fi2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier I2C controller (FIFO-builtin)
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-fi2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 100000
+    maximum: 400000
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c0: i2c@58780000 {
+        compatible = "socionext,uniphier-fi2c";
+        reg = <0x58780000 0x80>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <0 41 4>;
+        clocks = <&i2c_clk>;
+        clock-frequency = <100000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
new file mode 100644
index 000000000000..ddde08636ab0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/socionext,uniphier-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier I2C controller (FIFO-less)
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 100000
+    maximum: 400000
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c0: i2c@58400000 {
+        compatible = "socionext,uniphier-i2c";
+        reg = <0x58400000 0x40>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <0 41 1>;
+        clocks = <&i2c_clk>;
+        clock-frequency = <100000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
new file mode 100644
index 000000000000..42c5974ec7b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,nomadik-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST Microelectronics Nomadik I2C Bindings
+
+description: The Nomadik I2C host controller began its life in the ST
+  Microelectronics STn8800 SoC, and was then inherited into STn8810 and
+  STn8815. It was part of the prototype STn8500 which then became ST-Ericsson
+  DB8500 after the merge of these two companies wireless divisions.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,nomadik-i2c
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      # The variant found in STn8815
+      - items:
+          - const: st,nomadik-i2c
+          - const: arm,primecell
+      # The variant found in DB8500
+      - items:
+          - const: stericsson,db8500-i2c
+          - const: st,nomadik-i2c
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      # Clock name in STn8815
+      - items:
+          - const: mclk
+          - const: apb_pclk
+      # Clock name in DB8500
+      - items:
+          - const: i2cclk
+          - const: apb_pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 1
+    maximum: 400000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/stericsson,db8500-prcc-reset.h>
+    #include <dt-bindings/arm/ux500_pm_domains.h>
+    i2c@80004000 {
+      compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+      reg = <0x80004000 0x1000>;
+      interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-frequency = <400000>;
+      clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
+      clock-names = "i2cclk", "apb_pclk";
+      power-domains = <&pm_domains DOMAIN_VAPE>;
+      resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_I2C0>;
+    };
+
+    i2c@101f8000 {
+      compatible = "st,nomadik-i2c", "arm,primecell";
+      reg = <0x101f8000 0x1000>;
+      interrupt-parent = <&vica>;
+      interrupts = <20>;
+      clock-frequency = <100000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clocks = <&i2c0clk>, <&pclki2c0>;
+      clock-names = "mclk", "apb_pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index 900ec1ab6a47..bf396e9466aa 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: I2C controller embedded in STMicroelectronics STM32 I2C platform
 
 maintainers:
-  - Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
+  - Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
@@ -17,6 +17,8 @@ allOf:
           contains:
             enum:
               - st,stm32f7-i2c
+              - st,stm32mp13-i2c
+              - st,stm32mp15-i2c
     then:
       properties:
         i2c-scl-rising-time-ns:
@@ -24,17 +26,9 @@ allOf:
 
         i2c-scl-falling-time-ns:
           default: 10
-
-        st,syscfg-fmp:
-          description: Use to set Fast Mode Plus bit within SYSCFG when
-                       Fast Mode Plus speed is selected by slave.
-                       Format is phandle to syscfg / register offset within
-                       syscfg / register bitmask for FMP bit.
-          allOf:
-            - $ref: "/schemas/types.yaml#/definitions/phandle-array"
-            - items:
-                minItems: 3
-                maxItems: 3
+    else:
+      properties:
+        st,syscfg-fmp: false
 
   - if:
       properties:
@@ -52,6 +46,8 @@ properties:
     enum:
       - st,stm32f4-i2c
       - st,stm32f7-i2c
+      - st,stm32mp13-i2c
+      - st,stm32mp15-i2c
 
   reg:
     maxItems: 1
@@ -61,6 +57,11 @@ properties:
       - description: interrupt ID for I2C event
       - description: interrupt ID for I2C error
 
+  interrupt-names:
+    items:
+      - const: event
+      - const: error
+
   resets:
     maxItems: 1
 
@@ -80,11 +81,23 @@ properties:
   clock-frequency:
     description: Desired I2C bus clock frequency in Hz. If not specified,
                  the default 100 kHz frequency will be used.
-                 For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode,
-                 Fast-mode and Fast-mode Plus are supported, possible
-                 values are 100000, 400000 and 1000000.
+                 For STM32F7, STM32H7 and STM32MP1 SoCs, if timing parameters
+                 match, the bus clock frequency can be from 1Hz to 1MHz.
     default: 100000
-    enum: [100000, 400000, 1000000]
+    minimum: 1
+    maximum: 1000000
+
+  st,syscfg-fmp:
+    description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
+      Plus speed is selected by slave.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: phandle to syscfg
+          - description: register offset within syscfg
+          - description: register bitmask for FMP bit
+
+  wakeup-source: true
 
 required:
   - compatible
@@ -93,6 +106,8 @@ required:
   - resets
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/mfd/stm32f7-rcc.h>
@@ -109,6 +124,9 @@ examples:
           clocks = <&rcc 0 149>;
       };
 
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 2 (with st,stm32f7-i2c compatible)
       i2c@40005800 {
           compatible = "st,stm32f7-i2c";
@@ -121,12 +139,15 @@ examples:
           clocks = <&rcc 1 CLK_I2C1>;
       };
 
-    //Example 3 (with st,stm32f7-i2c compatible on stm32mp)
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    //Example 3 (with st,stm32mp15-i2c compatible on stm32mp)
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
       i2c@40013000 {
-          compatible = "st,stm32f7-i2c";
+          compatible = "st,stm32mp15-i2c";
           #address-cells = <1>;
           #size-cells = <0>;
           reg = <0x40013000 0x400>;
@@ -138,4 +159,3 @@ examples:
           i2c-scl-falling-time-ns = <20>;
           st,syscfg-fmp = <&syscfg 0x4 0x2>;
       };
-...
diff --git a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
new file mode 100644
index 000000000000..db0843be91c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ti,omap4-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for I2C controllers on TI's OMAP and K3 SoCs
+
+maintainers:
+  - Vignesh Raghavendra <vigneshr@ti.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,omap2420-i2c
+          - ti,omap2430-i2c
+          - ti,omap3-i2c
+          - ti,omap4-i2c
+      - items:
+          - enum:
+              - ti,am4372-i2c
+              - ti,am64-i2c
+              - ti,am654-i2c
+              - ti,j721e-i2c
+          - const: ti,omap4-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  clock-frequency: true
+
+  power-domains: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  ti,hwmods:
+    description:
+      Must be "i2c<n>", n being the instance number (1-based).
+      This property is applicable only on legacy platforms mainly omap2/3
+      and ti81xx and should not be used on other platforms.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+# subnode's properties
+patternProperties:
+  "@[0-9a-f]+$":
+    type: object
+    description:
+      Flash device uses the below defined properties in the subnode.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,omap2420-i2c
+        - ti,omap2430-i2c
+        - ti,omap3-i2c
+        - ti,omap4-i2c
+
+then:
+  properties:
+    ti,hwmods:
+      items:
+        - pattern: "^i2c([1-9])$"
+
+else:
+  properties:
+    ti,hwmods: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    main_i2c0: i2c@2000000 {
+            compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+            reg = <0x2000000 0x100>;
+            interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+         };
diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
new file mode 100644
index 000000000000..8d241a703d85
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xilinx IIC controller
+
+maintainers:
+  - info@mocean-labs.com
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: xlnx,xps-iic-2.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  clock-name:
+    const: pclk
+    description: |
+      Input clock name.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    axi_iic_0: i2c@40800000 {
+      compatible = "xlnx,xps-iic-2.00.a";
+      clocks = <&clkc 15>;
+      interrupts = < 1 2 >;
+      reg = < 0x40800000 0x10000 >;
+
+      #size-cells = <0>;
+      #address-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
deleted file mode 100644
index 1cf6182f888c..000000000000
--- a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Bindings for cadence I3C master block
-=====================================
-
-Required properties:
---------------------
-- compatible: shall be "cdns,i3c-master"
-- clocks: shall reference the pclk and sysclk
-- clock-names: shall contain "pclk" and "sysclk"
-- interrupts: the interrupt line connected to this I3C master
-- reg: I3C master registers
-
-Mandatory properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.txt for more details):
-
-- #address-cells: shall be set to 1
-- #size-cells: shall be set to 0
-
-Optional properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.txt for more details):
-
-- i2c-scl-hz
-- i3c-scl-hz
-
-I3C device connected on the bus follow the generic description (see
-Documentation/devicetree/bindings/i3c/i3c.txt for more details).
-
-Example:
-
-	i3c-master@0d040000 {
-		compatible = "cdns,i3c-master";
-		clocks = <&coreclock>, <&i3csysclock>;
-		clock-names = "pclk", "sysclk";
-		interrupts = <3 0>;
-		reg = <0x0d040000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-scl-hz = <100000>;
-
-		nunchuk: nunchuk@52 {
-			compatible = "nintendo,nunchuk";
-			reg = <0x52 0x0 0x10>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
new file mode 100644
index 000000000000..cc40d25358ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/cdns,i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence I3C master block
+
+maintainers:
+  - Boris Brezillon <bbrezillon@kernel.org>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    const: cdns,i3c-master
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: sysclk
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c-master@d040000 {
+        compatible = "cdns,i3c-master";
+        clocks = <&coreclock>, <&i3csysclock>;
+        clock-names = "pclk", "sysclk";
+        interrupts = <3 0>;
+        reg = <0x0d040000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+        i2c-scl-hz = <100000>;
+
+        eeprom@57{
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i3c/i3c.txt b/Documentation/devicetree/bindings/i3c/i3c.txt
deleted file mode 100644
index 4ffe059f0fec..000000000000
--- a/Documentation/devicetree/bindings/i3c/i3c.txt
+++ /dev/null
@@ -1,140 +0,0 @@
-Generic device tree bindings for I3C busses
-===========================================
-
-This document describes generic bindings that should be used to describe I3C
-busses in a device tree.
-
-Required properties
--------------------
-
-- #address-cells  - should be <3>. Read more about addresses below.
-- #size-cells     - should be <0>.
-- compatible      - name of the I3C master controller driving the I3C bus
-
-For other required properties e.g. to describe register sets,
-clocks, etc. check the binding documentation of the specific driver.
-The node describing an I3C bus should be named i3c-master.
-
-Optional properties
--------------------
-
-These properties may not be supported by all I3C master drivers. Each I3C
-master bindings should specify which of them are supported.
-
-- i3c-scl-hz: frequency of the SCL signal used for I3C transfers.
-	      When undefined the core sets it to 12.5MHz.
-
-- i2c-scl-hz: frequency of the SCL signal used for I2C transfers.
-	      When undefined, the core looks at LVR (Legacy Virtual Register)
-	      values of I2C devices described in the device tree to determine
-	      the maximum I2C frequency.
-
-I2C devices
-===========
-
-Each I2C device connected to the bus should be described in a subnode. All
-properties described in Documentation/devicetree/bindings/i2c/i2c.txt are
-valid here, but several new properties have been added.
-
-New constraint on existing properties:
---------------------------------------
-- reg: contains 3 cells
-  + first cell : still encoding the I2C address. 10 bit addressing is not
-    supported. Devices with 10 bit address can't be properly passed through
-    DEFSLVS command.
-
-  + second cell: shall be 0
-
-  + third cell: shall encode the I3C LVR (Legacy Virtual Register)
-	bit[31:8]: unused/ignored
-	bit[7:5]: I2C device index. Possible values
-	* 0: I2C device has a 50 ns spike filter
-	* 1: I2C device does not have a 50 ns spike filter but supports high
-	     frequency on SCL
-	* 2: I2C device does not have a 50 ns spike filter and is not tolerant
-	     to high frequencies
-	* 3-7: reserved
-
-	bit[4]: tell whether the device operates in FM (Fast Mode) or FM+ mode
-	* 0: FM+ mode
-	* 1: FM mode
-
-	bit[3:0]: device type
-	* 0-15: reserved
-
-The I2C node unit-address should always match the first cell of the reg
-property: <device-type>@<i2c-address>.
-
-I3C devices
-===========
-
-All I3C devices are supposed to support DAA (Dynamic Address Assignment), and
-are thus discoverable. So, by default, I3C devices do not have to be described
-in the device tree.
-This being said, one might want to attach extra resources to these devices,
-and those resources may have to be described in the device tree, which in turn
-means we have to describe I3C devices.
-
-Another use case for describing an I3C device in the device tree is when this
-I3C device has a static I2C address and we want to assign it a specific I3C
-dynamic address before the DAA takes place (so that other devices on the bus
-can't take this dynamic address).
-
-The I3C device should be names <device-type>@<static-i2c-address>,<i3c-pid>,
-where device-type is describing the type of device connected on the bus
-(gpio-controller, sensor, ...).
-
-Required properties
--------------------
-- reg: contains 3 cells
-  + first cell : encodes the static I2C address. Should be 0 if the device does
-		 not have one (0 is not a valid I2C address).
-
-  + second and third cells: should encode the ProvisionalID. The second cell
-			    contains the manufacturer ID left-shifted by 1.
-			    The third cell contains ORing of the part ID
-			    left-shifted by 16, the instance ID left-shifted
-			    by 12 and the extra information. This encoding is
-			    following the PID definition provided by the I3C
-			    specification.
-
-Optional properties
--------------------
-- assigned-address: dynamic address to be assigned to this device. This
-		    property is only valid if the I3C device has a static
-		    address (first cell of the reg property != 0).
-
-
-Example:
-
-	i3c-master@d040000 {
-		compatible = "cdns,i3c-master";
-		clocks = <&coreclock>, <&i3csysclock>;
-		clock-names = "pclk", "sysclk";
-		interrupts = <3 0>;
-		reg = <0x0d040000 0x1000>;
-		#address-cells = <3>;
-		#size-cells = <0>;
-		i2c-scl-hz = <100000>;
-
-		/* I2C device. */
-		nunchuk: nunchuk@52 {
-			compatible = "nintendo,nunchuk";
-			reg = <0x52 0x0 0x10>;
-		};
-
-		/* I3C device with a static I2C address. */
-		thermal_sensor: sensor@68,39200144004 {
-			reg = <0x68 0x392 0x144004>;
-			assigned-address = <0xa>;
-		};
-
-		/*
-		 * I3C device without a static I2C address but requiring
-		 * resources described in the DT.
-		 */
-		sensor@0,39200154004 {
-			reg = <0x0 0x392 0x154004>;
-			clocks = <&clock_provider 0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml
new file mode 100644
index 000000000000..1f82fc923799
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/i3c.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/i3c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I3C bus binding
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: |
+  I3C busses can be described with a node for the primary I3C controller device
+  and a set of child nodes for each I2C or I3C slave on the bus. Each of them
+  may, during the life of the bus, request mastership.
+
+properties:
+  $nodename:
+    pattern: "^i3c-master@[0-9a-f]+$"
+
+  "#address-cells":
+    const: 3
+    description: |
+      Each I2C device connected to the bus should be described in a subnode.
+
+      All I3C devices are supposed to support DAA (Dynamic Address Assignment),
+      and are thus discoverable. So, by default, I3C devices do not have to be
+      described in the device tree. This being said, one might want to attach
+      extra resources to these devices, and those resources may have to be
+      described in the device tree, which in turn means we have to describe
+      I3C devices.
+
+      Another use case for describing an I3C device in the device tree is when
+      this I3C device has a static I2C address and we want to assign it a
+      specific I3C dynamic address before the DAA takes place (so that other
+      devices on the bus can't take this dynamic address).
+
+  "#size-cells":
+    const: 0
+
+  i3c-scl-hz:
+    description: |
+      Frequency of the SCL signal used for I3C transfers. When undefined, the
+      default value should be 12.5MHz.
+
+      May not be supported by all controllers.
+
+  i2c-scl-hz:
+    description: |
+      Frequency of the SCL signal used for I2C transfers. When undefined, the
+      default should be to look at LVR (Legacy Virtual Register) values of
+      I2C devices described in the device tree to determine the maximum I2C
+      frequency.
+
+      May not be supported by all controllers.
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "@[0-9a-f]+$":
+    type: object
+    description: |
+      I2C child, should be named: <device-type>@<i2c-address>
+
+      All properties described in Documentation/devicetree/bindings/i2c/i2c.txt
+      are valid here, except the reg property whose content is changed.
+
+    properties:
+      compatible:
+        description:
+          Compatible of the I2C device.
+
+      reg:
+        items:
+          - items:
+              - description: |
+                  I2C address. 10 bit addressing is not supported. Devices with
+                  10-bit address can't be properly passed through DEFSLVS
+                  command.
+                minimum: 0
+                maximum: 0x7f
+              - const: 0
+              - description: |
+                  Shall encode the I3C LVR (Legacy Virtual Register):
+                    bit[31:8]: unused/ignored
+                    bit[7:5]: I2C device index. Possible values:
+                      * 0: I2C device has a 50 ns spike filter
+                      * 1: I2C device does not have a 50 ns spike filter but
+                           supports high frequency on SCL
+                      * 2: I2C device does not have a 50 ns spike filter and is
+                           not tolerant to high frequencies
+                      * 3-7: reserved
+                    bit[4]: tell whether the device operates in FM (Fast Mode)
+                            or FM+ mode:
+                      * 0: FM+ mode
+                      * 1: FM mode
+                    bit[3:0]: device type
+                      * 0-15: reserved
+
+    required:
+      - compatible
+      - reg
+
+  "@[0-9a-f]+,[0-9a-f]+$":
+    type: object
+    description: |
+      I3C child, should be named: <device-type>@<static-i2c-address>,<i3c-pid>
+
+    properties:
+      reg:
+        items:
+          - items:
+              - description: |
+                  Encodes the static I2C address. Should be 0 if the device does
+                  not have one (0 is not a valid I2C address).
+                minimum: 0
+                maximum: 0x7f
+              - description: |
+                  First half of the Provisional ID (following the PID
+                  definition provided by the I3C specification).
+
+                  Contains the manufacturer ID left-shifted by 1.
+              - description: |
+                  Second half of the Provisional ID (following the PID
+                  definition provided by the I3C specification).
+
+                  Contains the ORing of the part ID left-shifted by 16,
+                  the instance ID left-shifted by 12 and extra information.
+
+      assigned-address:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0x1
+        maximum: 0xff
+        description: |
+          Dynamic address to be assigned to this device. This property is only
+          valid if the I3C device has a static address (first cell of the reg
+          property != 0).
+
+    required:
+      - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    i3c-master@d040000 {
+        compatible = "cdns,i3c-master";
+        clocks = <&coreclock>, <&i3csysclock>;
+        clock-names = "pclk", "sysclk";
+        interrupts = <3 0>;
+        reg = <0x0d040000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+        i2c-scl-hz = <100000>;
+
+        /* I2C device. */
+        eeprom@57 {
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+
+        /* I3C device with a static I2C address. */
+        thermal_sensor: sensor@68,39200144004 {
+            reg = <0x68 0x392 0x144004>;
+            assigned-address = <0xa>;
+        };
+
+        /*
+         * I3C device without a static I2C address but requiring
+         * resources described in the DT.
+         */
+        sensor@0,39200154004 {
+            reg = <0x0 0x392 0x154004>;
+            clocks = <&clock_provider 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
new file mode 100644
index 000000000000..c002afdbfc7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i3c/mipi-i3c-hci.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MIPI I3C HCI
+
+maintainers:
+  - Nicolas Pitre <npitre@baylibre.com>
+
+allOf:
+  - $ref: /schemas/i3c/i3c.yaml#
+
+description: |
+  MIPI I3C Host Controller Interface
+
+  The MIPI I3C HCI (Host Controller Interface) specification defines
+  a common software driver interface to support compliant MIPI I3C
+  host controller hardware implementations from multiple vendors.
+
+  The hardware is self-advertising for differences in implementation
+  capabilities, including the spec version it is based on, so there
+  isn't much to describe here (yet).
+
+  For details, please see:
+  https://www.mipi.org/specifications/i3c-hci
+
+properties:
+  compatible:
+    const: mipi-i3c-hci
+  reg:
+    maxItems: 1
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c-master@a0000000 {
+      compatible = "mipi-i3c-hci";
+      reg = <0xa0000000 0x2000>;
+      interrupts = <89>;
+      #address-cells = <3>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
new file mode 100644
index 000000000000..62f3ca66274f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/silvaco,i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silvaco I3C master
+
+maintainers:
+  - Conor Culhane <conor.culhane@silvaco.com>
+
+allOf:
+  - $ref: "i3c.yaml#"
+
+properties:
+  compatible:
+    const: silvaco,i3c-master-v1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: system clock
+      - description: bus clock
+      - description: other (slower) events clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: fast_clk
+      - const: slow_clk
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+additionalProperties: true
+
+examples:
+  - |
+    i3c-master@a0000000 {
+        compatible = "silvaco,i3c-master-v1";
+        clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>;
+        clock-names = "pclk", "fast_clk", "slow_clk";
+        interrupt-parent = <&gic>;
+        interrupts = <0 89 4>;
+        reg = <0xa0000000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
deleted file mode 100644
index 5020eb71eb8d..000000000000
--- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Bindings for Synopsys DesignWare I3C master block
-=================================================
-
-Required properties:
---------------------
-- compatible: shall be "snps,dw-i3c-master-1.00a"
-- clocks: shall reference the core_clk
-- interrupts: the interrupt line connected to this I3C master
-- reg: Offset and length of I3C master registers
-
-Mandatory properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.txt for more details):
-
-- #address-cells: shall be set to 3
-- #size-cells: shall be set to 0
-
-Optional properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.txt for more details):
-
-- i2c-scl-hz
-- i3c-scl-hz
-
-I3C device connected on the bus follow the generic description (see
-Documentation/devicetree/bindings/i3c/i3c.txt for more details).
-
-Example:
-
-	i3c-master@2000 {
-		compatible = "snps,dw-i3c-master-1.00a";
-		#address-cells = <3>;
-		#size-cells = <0>;
-		reg = <0x02000 0x1000>;
-		interrupts = <0>;
-		clocks = <&i3cclk>;
-
-		eeprom@57{
-			compatible = "atmel,24c01";
-			reg = <0x57 0x0 0x10>;
-			pagesize = <0x8>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
new file mode 100644
index 000000000000..7a76fd32962a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/snps,dw-i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare I3C master block
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    const: snps,dw-i3c-master-1.00a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c-master@2000 {
+        compatible = "snps,dw-i3c-master-1.00a";
+        #address-cells = <3>;
+        #size-cells = <0>;
+        reg = <0x02000 0x1000>;
+        interrupts = <0>;
+        clocks = <&i3cclk>;
+
+        eeprom@57{
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
new file mode 100644
index 000000000000..7332442e5661
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adis16201.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADIS16201 Dual Axis Inclinometer and similar
+
+maintainers:
+  - Jonathan Cameron <Jonathan.Cameron@huawei.com>
+
+description: |
+  Two similar parts from external interface point of view.
+  SPI interface.
+    https://www.analog.com/en/products/adis16201.html
+    https://www.analog.com/en/products/adis16209.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16201
+      - adi,adis16209
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@0 {
+            compatible = "adi,adis16201";
+            reg = <0>;
+            spi-max-frequency = <2500000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
index 4147f02b5e3c..f6f97164c2ca 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ADIS16240 Programmable Impact Sensor and Recorder driver
 
 maintainers:
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+  - Alexandru Tachici <alexandru.tachici@analog.com>
 
 description: |
   ADIS16240 Programmable Impact Sensor and Recorder driver that supports
@@ -30,6 +30,11 @@ required:
   - reg
   - interrupts
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
new file mode 100644
index 000000000000..185b68ffb536
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers
+
+maintainers:
+  - Lucas Stankus <lucas.p.stankus@gmail.com>
+
+description: |
+  Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that
+  support both I2C & SPI interfaces.
+    https://www.analog.com/en/products/adxl312.html
+    https://www.analog.com/en/products/adxl313.html
+    https://www.analog.com/en/products/adxl314.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl312
+      - adi,adxl313
+      - adi,adxl314
+
+  reg:
+    maxItems: 1
+
+  spi-3wire: true
+
+  vs-supply:
+    description: Regulator that supplies power to the accelerometer
+
+  vdd-supply:
+    description: Regulator that supplies the digital interface supply voltage
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@53 {
+            compatible = "adi,adxl313";
+            reg = <0x53>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adxl313";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index c602b6fe1c0c..346abfb13a3a 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -12,14 +12,18 @@ maintainers:
 description: |
   Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
   both I2C & SPI interfaces.
-    http://www.analog.com/en/products/mems/accelerometers/adxl345.html
-    http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
+    https://www.analog.com/en/products/mems/accelerometers/adxl345.html
+    https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
 
 properties:
   compatible:
-    enum:
-      - adi,adxl345
-      - adi,adxl375
+    oneOf:
+      - items:
+          - const: adi,adxl346
+          - const: adi,adxl345
+      - enum:
+          - adi,adxl345
+          - adi,adxl375
 
   reg:
     maxItems: 1
@@ -36,6 +40,11 @@ required:
   - reg
   - interrupts
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
@@ -47,7 +56,7 @@ examples:
         /* Example for a I2C device node */
         accelerometer@2a {
             compatible = "adi,adxl345";
-            reg = <0x53>;
+            reg = <0x2a>;
             interrupt-parent = <&gpio0>;
             interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
         };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
new file mode 100644
index 000000000000..14b487088ab4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer
+
+maintainers:
+  - Puranjay Mohan <puranjay12@gmail.com>
+
+description: |
+  Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports
+  both I2C & SPI interfaces
+    https://www.analog.com/en/products/adxl355.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl355
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+    description: |
+      Type for DRDY should be IRQ_TYPE_EDGE_RISING.
+      Three configurable interrupt lines exist.
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+        - DRDY
+    minItems: 1
+    maxItems: 3
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/gpio/gpio.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        i2c {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                /* Example for a I2C device node */
+                accelerometer@1d {
+                        compatible = "adi,adxl355";
+                        reg = <0x1d>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+                        interrupt-names = "DRDY";
+                };
+        };
+  - |
+        #include <dt-bindings/gpio/gpio.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        spi {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                accelerometer@0 {
+                        compatible = "adi,adxl355";
+                        reg = <0>;
+                        spi-max-frequency = <1000000>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+                        interrupt-names = "DRDY";
+                };
+        };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
new file mode 100644
index 000000000000..f10d98d34cb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl367.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL367 3-Axis Digital Accelerometer
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
+
+  The ADXL367 does not alias input signals by to achieve ultralow power
+  consumption, it samples the full bandwidth of the sensor at all
+  data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
+  with a resolution of 0.25mg/LSB on the +-2 g range.
+
+  In addition to its ultralow power consumption, the ADXL367
+  has many features to enable true system level power reduction.
+  It includes a deep multimode output FIFO, a built-in micropower
+  temperature sensor, and an internal ADC for synchronous conversion
+  of an additional analog input.
+    https://www.analog.com/en/products/adxl367.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl367
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@53 {
+        compatible = "adi,adxl367";
+        reg = <0x53>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@0 {
+        compatible = "adi,adxl367";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index e7daffec88d3..73a5c8f814cc 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -30,6 +30,11 @@ required:
   - reg
   - interrupts
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
         #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
deleted file mode 100644
index f53237270b32..000000000000
--- a/Documentation/devicetree/bindings/iio/accel/bma180.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Bosch BMA180 / BMA25x triaxial acceleration sensor
-
-http://omapworld.com/BMA180_111_1002839.pdf
-http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
-
-Required properties:
-
-  - compatible : should be one of:
-    "bosch,bma180"
-    "bosch,bma250"
-    "bosch,bma254"
-  - reg : the I2C address of the sensor
-
-Optional properties:
-
-  - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
-		flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
-		For the bma250 the first interrupt listed must be the one
-		connected to the INT1 pin, the second (optional) interrupt
-		listed must be the one connected to the INT2 pin.
-
-Example:
-
-bma180@40 {
-	compatible = "bosch,bma180";
-	reg = <0x40>;
-	interrupt-parent = <&gpio6>;
-	interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
-};
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
new file mode 100644
index 000000000000..5dd06f5905b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma220.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA220 Trixial Acceleration Sensor
+
+maintainers:
+  - Jonathan Cameron <Jonathan.Cameron@huawei.com>
+
+properties:
+  compatible:
+    enum:
+      - bosch,bma220
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdda-supply: true
+  vddd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@0 {
+            compatible = "bosch,bma220";
+            reg = <0>;
+            spi-max-frequency = <2500000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
new file mode 100644
index 000000000000..457a709b583c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma255.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA255 and Similar Accelerometers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description:
+  3 axis accelerometers with varying range and I2C or SPI
+  4-wire interface.
+
+properties:
+  compatible:
+    enum:
+      # bmc150-accel driver in Linux
+      - bosch,bma222
+      - bosch,bma222e
+      - bosch,bma250e
+      - bosch,bma253
+      - bosch,bma254
+      - bosch,bma255
+      - bosch,bma280
+      - bosch,bmc150_accel
+      - bosch,bmc156_accel
+      - bosch,bmi055_accel
+
+      # bma180 driver in Linux
+      - bosch,bma023
+      - bosch,bma150
+      - bosch,bma180
+      - bosch,bma250
+      - bosch,smb380
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Without interrupt-names, the first interrupt listed must be the one
+      connected to the INT1 pin, the second (optional) interrupt listed must be
+      the one connected to the INT2 pin (if available). The type should be
+      IRQ_TYPE_EDGE_RISING.
+
+      BMC156 does not have an INT1 pin, therefore the first interrupt pin is
+      always treated as INT2.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+  spi-max-frequency:
+    maximum: 10000000
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accelerometer@8 {
+            compatible = "bosch,bma222";
+            reg = <0x08>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accelerometer@10 {
+            compatible = "bosch,bmc156_accel";
+            reg = <0x10>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+            interrupts = <116 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT2";
+        };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@0 {
+            compatible = "bosch,bma222";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
index c1c6d6f223cf..8723a336229e 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
@@ -36,6 +36,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
new file mode 100644
index 000000000000..3cb82576d758
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI088 IMU accelerometer part
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+  Acceleration part of the IMU sensor with an SPI interface
+  Specifications about the sensor can be found at:
+    https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
+
+properties:
+  compatible:
+    enum:
+      - bosch,bmi085-accel
+      - bosch,bmi088-accel
+      - bosch,bmi090l-accel
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
+      Two configurable interrupt lines exist.
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      bmi088-accel@1 {
+        compatible = "bosch,bmi088-accel";
+        reg = <1>;
+        spi-max-frequency = <10000000>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "INT2";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt
deleted file mode 100644
index ce105a12c645..000000000000
--- a/Documentation/devicetree/bindings/iio/accel/dmard06.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Device tree bindings for Domintech DMARD05, DMARD06, DMARD07 accelerometers
-
-Required properties:
- - compatible		: Should be "domintech,dmard05"
-				 or "domintech,dmard06"
-				 or "domintech,dmard07"
- - reg			: I2C address of the chip. Should be 0x1c
-
-Example:
-	&i2c1 {
-		/* ... */
-
-		accelerometer@1c {
-			compatible = "domintech,dmard06";
-			reg = <0x1c>;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
new file mode 100644
index 000000000000..c8659c5eba2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/fsl,mma7455.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MMA7455 and MMA7456 three axis accelerometers
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Devices support both SPI and I2C interfaces.
+
+properties:
+  compatible:
+    enum:
+      - fsl,mma7455
+      - fsl,mma7456
+  reg:
+    maxItems: 1
+
+  avdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description:
+      Data ready is only available on INT1, but events can use either or
+      both pins.  If not specified, first element assumed to correspond
+      to INT1 and second (where present) to INT2.
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - "INT1"
+        - "INT2"
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@18 {
+            compatible = "fsl,mma7455";
+            reg = <0x18>;
+            vddio-supply = <&iovdd>;
+            avdd-supply = <&avdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_FALLING>, <58 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "INT2", "INT1";
+        };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accelerometer@0 {
+            compatible = "fsl,mma7456";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            vddio-supply = <&iovdd>;
+            avdd-supply = <&avdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "INT1";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma8452.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma8452.yaml
new file mode 100644
index 000000000000..b0dd2b4e116a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma8452.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/fsl,mma8452.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC or FXLS8471Q
+  triaxial accelerometer
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,mma8451
+      - fsl,mma8452
+      - fsl,mma8453
+      - fsl,mma8652
+      - fsl,mma8653
+      - fsl,fxls8471
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      2 highly configurable interrupt lines exist.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+    minItems: 1
+    maxItems: 2
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accel@1d {
+            compatible = "fsl,mma8453";
+            reg = <0x1d>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <5 0>;
+            interrupt-names = "INT2";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt
deleted file mode 100644
index ce950e162d5d..000000000000
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Kionix KXCJK-1013 Accelerometer device tree bindings
-
-Required properties:
-
-- compatible: Must be one of:
-    "kionix,kxcjk1013"
-    "kionix,kxcj91008"
-    "kionix,kxtj21009"
-    "kionix,kxtf9"
- - reg: i2c slave address
-
-Optional properties:
-
-  - mount-matrix: an optional 3x3 mounting rotation matrix
-
-Example:
-
-kxtf9@f {
-	compatible = "kionix,kxtf9";
-	reg = <0x0F>;
-	mount-matrix =	"0", "1", "0",
-			"1", "0", "0",
-			"0", "0", "1";
-};
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
new file mode 100644
index 000000000000..714e48e613de
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kxcjk1013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kionix KXCJK-1013 Accelerometer
+
+maintainers:
+  - Robert Yang <decatf@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - kionix,kxcjk1013
+      - kionix,kxcj91008
+      - kionix,kxtj21009
+      - kionix,kxtf9
+      - kionix,kx023-1025
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accel@f {
+            compatible = "kionix,kxtf9";
+            reg = <0x0F>;
+            mount-matrix = "0", "1", "0",
+                           "1", "0", "0",
+                           "0", "0", "1";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.txt b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.txt
deleted file mode 100644
index b25bf3a77e0f..000000000000
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Kionix KXSD9 Accelerometer device tree bindings
-
-Required properties:
- - compatible: 		should be set to "kionix,kxsd9"
- - reg:			i2c slave address
-
-Optional properties:
- - vdd-supply:		The input supply for VDD
- - iovdd-supply:	The input supply for IOVDD
- - interrupts:		The movement detection interrupt
- - mount-matrix:	See mount-matrix.txt
-
-Example:
-
-kxsd9@18 {
-	compatible = "kionix,kxsd9";
-	reg = <0x18>;
-	interrupt-parent = <&foo>;
-	interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
-	iovdd-supply = <&bar>;
-	vdd-supply = <&baz>;
-};
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
new file mode 100644
index 000000000000..f64d99b35492
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kxsd9.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kionix KXSD9 Accelerometer
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  3 axis 12 bit accelerometer with +-8G range on all axes. Also has a
+  12 bit auxiliary ADC channel. Interface is either SPI or I2C.
+
+properties:
+  compatible:
+    const: kionix,kxsd9
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  iovdd-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accel@18 {
+            compatible = "kionix,kxsd9";
+            reg = <0x18>;
+            iovdd-supply = <&iovdd>;
+            vdd-supply = <&vdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+            mount-matrix = "-0.984807753012208", "0",  "-0.173648177666930",
+                           "0",                  "-1", "0",
+                           "-0.173648177666930", "0",  "0.984807753012208";
+        };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@0 {
+            compatible = "kionix,kxsd9";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
new file mode 100644
index 000000000000..23528dcaa073
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MEMSensing digital 3-Axis accelerometer
+
+maintainers:
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+description: |
+  MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
+  sensitivity consumer applications. It has dynamical user selectable full
+  scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
+  with output data rates from 1Hz to 1000Hz.
+  Datasheet can be found at following URL
+  https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf
+
+properties:
+  compatible:
+    const: memsensing,msa311
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@62 {
+            compatible = "memsensing,msa311";
+            reg = <0x62>;
+            interrupt-parent = <&gpio_intc>;
+            interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&vcc_5v>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
deleted file mode 100644
index e132394375a1..000000000000
--- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC or FXLS8471Q
-triaxial accelerometer
-
-Required properties:
-
-  - compatible: should contain one of
-    * "fsl,mma8451"
-    * "fsl,mma8452"
-    * "fsl,mma8453"
-    * "fsl,mma8652"
-    * "fsl,mma8653"
-    * "fsl,fxls8471"
-
-  - reg: the I2C address of the chip
-
-Optional properties:
-
-  - interrupts: interrupt mapping for GPIO IRQ
-
-  - interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's
-		     interrupt line in use.
-
-  - vdd-supply: phandle to the regulator that provides vdd power to the accelerometer.
-
-  - vddio-supply: phandle to the regulator that provides vddio power to the accelerometer.
-
-Example:
-
-	mma8453fc@1d {
-		compatible = "fsl,mma8453";
-		reg = <0x1d>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <5 0>;
-		interrupt-names = "INT2";
-	};
diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
new file mode 100644
index 000000000000..00c990caa1e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/murata,sca3300.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Murata SCA3300 Accelerometer
+
+description: |
+  3-axis industrial accelerometer with digital SPI interface
+  https://www.murata.com/en-global/products/sensor/accel/sca3300
+
+maintainers:
+  - Tomas Melin <tomas.melin@vaisala.com>
+
+properties:
+  compatible:
+    enum:
+      - murata,sca3300
+      - murata,scl3300
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 8000000
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accelerometer@0 {
+            compatible = "murata,sca3300";
+            reg = <0x0>;
+            spi-max-frequency = <4000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
new file mode 100644
index 000000000000..65ce8ea14b52
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver
+
+maintainers:
+  - Sean Nyekjaer <sean@geanix.com>
+
+description: |
+  NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports
+  SPI and I2C interface.
+    https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf
+    https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,fxls8962af
+      - nxp,fxls8964af
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: phandle to the regulator that provides power to the accelerometer
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    enum:
+      - INT1
+      - INT2
+
+  drive-open-drain:
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@62 {
+            compatible = "nxp,fxls8962af";
+            reg = <0x62>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "nxp,fxls8962af";
+            reg = <0>;
+            spi-max-frequency = <4000000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/ad7949.txt b/Documentation/devicetree/bindings/iio/adc/ad7949.txt
deleted file mode 100644
index c7f5057356b1..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ad7949.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* Analog Devices AD7949/AD7682/AD7689
-
-Required properties:
- - compatible: Should be one of
-	* "adi,ad7949"
-	* "adi,ad7682"
-	* "adi,ad7689"
- - reg: spi chip select number for the device
- - vref-supply: The regulator supply for ADC reference voltage
-
-Example:
-adc@0 {
-	compatible = "adi,ad7949";
-	reg = <0>;
-	vref-supply = <&vdd_supply>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/adc.txt b/Documentation/devicetree/bindings/iio/adc/adc.txt
deleted file mode 100644
index 5bbaa330a250..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/adc.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Common ADCs properties
-
-Optional properties for child nodes:
-- bipolar : Boolean, if set the channel is used in bipolar mode.
-- diff-channels : Differential channels muxed for this ADC. The first value
-		specifies the positive input pin, the second value the negative
-		input pin.
-
-Example:
-	adc@0 {
-		compatible = "some,adc";
-		...
-		channel@0 {
-			bipolar;
-			diff-channels = <0 1>;
-			...
-		};
-
-		channel@1 {
-			diff-channels = <2 3>;
-			...
-		};
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/adc.yaml b/Documentation/devicetree/bindings/iio/adc/adc.yaml
new file mode 100644
index 000000000000..db348fcbb52c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic IIO bindings for ADC channels
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  A few properties are defined in a common way ADC channels.
+
+properties:
+  $nodename:
+    pattern: "^channel(@[0-9a-f]+)?$"
+    description:
+      A channel index should match reg.
+
+  reg:
+    maxItems: 1
+
+  label:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Unique name to identify which channel this is.
+
+  bipolar:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If provided, the channel is to be used in bipolar mode.
+
+  diff-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+    minItems: 2
+    description:
+      Many ADCs have dual Muxes to allow different input pins to be routed
+      to both the positive and negative inputs of a differential ADC.
+      The first value specifies the positive input pin, the second
+      specifies the negative input pin.
+
+  settling-time-us:
+    description:
+      Time between enabling the channel and first stable readings.
+
+  oversampling-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Oversampling is used as replacement of or addition to the low-pass filter.
+      In some cases, the desired filtering characteristics are a function the
+      device design and can interact with other characteristics such as
+      settling time.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
index 31ffa275f5fa..b97559f23b3a 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD7091R5 4-Channel 12-Bit ADC
 
 maintainers:
-  - Beniamin Bia <beniamin.bia@analog.com>
+  - Michael Hennerich <michael.hennerich@analog.com>
 
 description: |
   Analog Devices AD7091R5 4-Channel 12-Bit ADC
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index f0934b295edc..75a7184a4735 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -61,10 +61,10 @@ required:
 
 patternProperties:
   "^channel@([0-9]|1[0-5])$":
+    $ref: "adc.yaml"
     type: object
     description: |
       Represents the external channels which are connected to the ADC.
-      See Documentation/devicetree/bindings/iio/adc/adc.txt.
 
     properties:
       reg:
@@ -72,8 +72,8 @@ patternProperties:
           The channel number. It can have up to 8 channels on ad7124-4
           and 16 channels on ad7124-8, numbered from 0 to 15.
         items:
-         minimum: 0
-         maximum: 15
+          minimum: 0
+          maximum: 15
 
       adi,reference-select:
         description: |
@@ -83,19 +83,12 @@ patternProperties:
           1: REFIN2(+)/REFIN2(−).
           3: AVDD
           If this field is left empty, internal reference is selected.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 3]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 3]
 
-      diff-channels:
-        description: see Documentation/devicetree/bindings/iio/adc/adc.txt
-        items:
-          minimum: 0
-          maximum: 15
+      diff-channels: true
 
-      bipolar:
-        description: see Documentation/devicetree/bindings/iio/adc/adc.txt
-        type: boolean
+      bipolar: true
 
       adi,buffered-positive:
         description: Enable buffered mode for positive input.
@@ -109,6 +102,13 @@ patternProperties:
       - reg
       - diff-channels
 
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index 84d25bd39488..cc347dade4ef 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -78,7 +78,7 @@ properties:
     type: boolean
 
   bipolar:
-    description: see Documentation/devicetree/bindings/iio/adc/adc.txt
+    description: see Documentation/devicetree/bindings/iio/adc/adc.yaml
     type: boolean
 
 required:
@@ -92,6 +92,11 @@ required:
   - spi-cpol
   - spi-cpha
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi0 {
@@ -106,7 +111,6 @@ examples:
         spi-cpha;
         clocks = <&ad7192_mclk>;
         clock-names = "mclk";
-        #interrupt-cells = <2>;
         interrupts = <25 0x2>;
         interrupt-parent = <&gpio>;
         dvdd-supply = <&dvdd>;
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
new file mode 100644
index 000000000000..dfb8f305e2f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7280a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7280a Lithium Ion Battery Monitoring System
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Bindings for the Analog Devices AD7280a Battery Monitoring System.
+  Used in devices such as hybrid electric cars, battery backup and power tools.
+  Multiple chips can be daisy chained and accessed via a single SPI interface.
+  Data sheet found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7280A.pdf
+
+properties:
+  compatible:
+    const: adi,ad7280a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line for the ADC
+    maxItems: 1
+
+  adi,voltage-alert-last-chan:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Allows limiting of scope of which channels are considered for voltage
+      alerts, typically because not all are wired to anything. Only applies to
+      last device in the daisy chain.
+    default: 5
+    enum: [3, 4, 5]
+
+  adi,acquisition-time-ns:
+    description:
+      Additional time may be needed to charge the sampling capacitors depending
+      on external writing.
+    default: 400
+    enum: [400, 800, 1200, 1600]
+
+  adi,thermistor-termination:
+    type: boolean
+    description:
+      Enable the thermistor termination function.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7280a";
+        reg = <0>;
+        spi-max-frequency = <700000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 2>;
+        adi,thermistor-termination;
+        adi,acquisition-time-ns = <800>;
+        adi,voltage-alert-last-chan = <5>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
new file mode 100644
index 000000000000..0b2f5dc80600
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7291.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7291 8-Channel, I2C, 12-Bit SAR ADC with Temperature Sensor
+
+maintainers:
+  - Michael Auchter <michael.auchter@ni.com>
+
+description: |
+  Analog Devices AD7291 8-Channel I2C 12-Bit SAR ADC with Temperature Sensor
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7291.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7291
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: |
+      The regulator supply for ADC reference voltage.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7291: adc@0 {
+        compatible = "adi,ad7291";
+        reg = <0>;
+        vref-supply = <&adc_vref>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
index e1f6d64bdccd..1bfbeed6f299 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -43,10 +43,10 @@ required:
 
 patternProperties:
   "^channel@[0-7]$":
+    $ref: "adc.yaml"
     type: object
     description: |
       Represents the external channels which are connected to the ADC.
-      See Documentation/devicetree/bindings/iio/adc/adc.txt.
 
     properties:
       reg:
@@ -56,13 +56,18 @@ patternProperties:
           - minimum: 0
             maximum: 7
 
-      diff-channels:
-        description: see Documentation/devicetree/bindings/iio/adc/adc.txt
-        maxItems: 1
+      diff-channels: true
 
     required:
       - reg
 
+    additionalProperties: true
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
new file mode 100644
index 000000000000..cd8ac5162d27
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7298.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7298 ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD7298 ADC device. Datasheet can be
+  found here:
+    https://www.analog.com/en/products/ad7298.html
+
+properties:
+  compatible:
+    const: adi,ad7298
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7298";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        vref-supply = <&adc_vref>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
new file mode 100644
index 000000000000..44c671eeda73
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7476.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7476 and similar simple SPI ADCs from multiple manufacturers.
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  A lot of simple SPI ADCs have very straight forward interfaces.
+  They typically don't provide a MOSI pin, simply reading out data
+  on MISO when the clock toggles.
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7091
+      - adi,ad7091r
+      - adi,ad7273
+      - adi,ad7274
+      - adi,ad7276
+      - adi,ad7277
+      - adi,ad7278
+      - adi,ad7466
+      - adi,ad7467
+      - adi,ad7468
+      - adi,ad7475
+      - adi,ad7476
+      - adi,ad7476a
+      - adi,ad7477
+      - adi,ad7477a
+      - adi,ad7478
+      - adi,ad7478a
+      - adi,ad7495
+      - adi,ad7910
+      - adi,ad7920
+      - adi,ad7940
+      - ti,adc081s
+      - ti,adc101s
+      - ti,adc121s
+      - ti,ads7866
+      - ti,ads7867
+      - ti,ads7868
+      - lltc,ltc2314-14
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description:
+      Main powersupply voltage for the chips, sometimes referred to as VDD on
+      datasheets.  If there is no separate vref-supply, then this is needed
+      to establish channel scaling.
+
+  vdrive-supply:
+    description:
+      Some devices have separate supply for their digital control side.
+
+  vref-supply:
+    description:
+      Some devices have a specific reference voltage supplied on a different pin
+      to the other supplies. Needed to be able to establish channel scaling
+      unless there is also an internal reference available (e.g. ad7091r)
+
+  adi,conversion-start-gpios:
+    description: A GPIO used to trigger the start of a conversion
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  # Devices where reference is vcc
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091
+              - adi,ad7276
+              - adi,ad7277
+              - adi,ad7278
+              - adi,ad7466
+              - adi,ad7467
+              - adi,ad7468
+              - adi,ad7940
+              - ti,adc081s
+              - ti,adc101s
+              - ti,adc121s
+              - ti,ads7866
+              - ti,ads7868
+    then:
+      required:
+        - vcc-supply
+  # Devices with a vref
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091r
+              - adi,ad7273
+              - adi,ad7274
+              - adi,ad7475
+              - lltc,ltc2314-14
+    then:
+      properties:
+        vref-supply: true
+    else:
+      properties:
+        vref-supply: false
+  # Devices with a vref where it is not optional
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7273
+              - adi,ad7274
+              - adi,ad7475
+              - lltc,ltc2314-14
+    then:
+      required:
+        - vref-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7475
+              - adi,ad7495
+    then:
+      properties:
+        vdrive-supply: true
+    else:
+      properties:
+        vdrive-supply: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091
+              - adi,ad7091r
+    then:
+      properties:
+        adi,conversion-start-gpios: true
+    else:
+      properties:
+        adi,conversion-start-gpios: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7091r";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        vcc-supply = <&adc_vcc>;
+        vref-supply = <&adc_vref>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 5117ad68a584..ac5a47c8f070 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -7,8 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD7606 Simultaneous Sampling ADC
 
 maintainers:
-  - Beniamin Bia <beniamin.bia@analog.com>
-  - Stefan Popa <stefan.popa@analog.com>
+  - Michael Hennerich <michael.hennerich@analog.com>
 
 description: |
   Analog Devices AD7606 Simultaneous Sampling ADC
@@ -31,6 +30,8 @@ properties:
 
   spi-cpha: true
 
+  spi-cpol: true
+
   avcc-supply: true
 
   interrupts:
@@ -53,10 +54,10 @@ properties:
 
   standby-gpios:
     description:
-       Must be the device tree identifier of the STBY pin. This pin is used
-       to place the AD7606 into one of two power-down modes, Standby mode or
-       Shutdown mode. As the line is active low, it should be marked
-       GPIO_ACTIVE_LOW.
+      Must be the device tree identifier of the STBY pin. This pin is used
+      to place the AD7606 into one of two power-down modes, Standby mode or
+      Shutdown mode. As the line is active low, it should be marked
+      GPIO_ACTIVE_LOW.
     maxItems: 1
 
   adi,first-data-gpios:
@@ -102,6 +103,11 @@ required:
   - interrupts
   - adi,conversion-start-gpios
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt
deleted file mode 100644
index 9f5b88cf680d..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Analog Devices AD7768-1 ADC device driver
-
-Required properties for the AD7768-1:
-
-- compatible: Must be "adi,ad7768-1"
-- reg: SPI chip select number for the device
-- spi-max-frequency: Max SPI frequency to use
-	see: Documentation/devicetree/bindings/spi/spi-bus.txt
-- clocks: phandle to the master clock (mclk)
-	see: Documentation/devicetree/bindings/clock/clock-bindings.txt
-- clock-names: Must be "mclk".
-- interrupts: IRQ line for the ADC
-	see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- vref-supply: vref supply can be used as reference for conversion
-- adi,sync-in-gpios: must be the device tree identifier of the SYNC-IN pin. Enables
-	synchronization of multiple devices that require simultaneous sampling.
-	A pulse is always required if the configuration is changed in any way, for example
-	if the filter decimation rate changes. As the line is active low, it should
-	be marked GPIO_ACTIVE_LOW.
-
-Optional properties:
-
- - reset-gpios : GPIO spec for the RESET pin. If specified, it will be asserted during
-	driver probe. As the line is active low, it should be marked GPIO_ACTIVE_LOW.
-
-Example:
-
-	adc@0 {
-		compatible = "adi,ad7768-1";
-		reg = <0>;
-		spi-max-frequency = <2000000>;
-		spi-cpol;
-		spi-cpha;
-		vref-supply = <&adc_vref>;
-		interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-		interrupt-parent = <&gpio>;
-		adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-		reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
-		clocks = <&ad7768_mclk>;
-		clock-names = "mclk";
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
new file mode 100644
index 000000000000..3ce59d4d065f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7768-1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7768-1 ADC device driver
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Datasheet at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf
+
+properties:
+  compatible:
+    const: adi,ad7768-1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  vref-supply:
+    description:
+      ADC reference voltage supply
+
+  adi,sync-in-gpios:
+    maxItems: 1
+    description:
+      Enables synchronization of multiple devices that require simultaneous
+      sampling. A pulse is always required if the configuration is changed
+      in any way, for example if the filter decimation rate changes.
+      As the line is active low, it should be marked GPIO_ACTIVE_LOW.
+
+  reset-gpios:
+    maxItems: 1
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+  - spi-cpol
+  - spi-cpha
+  - adi,sync-in-gpios
+
+patternProperties:
+  "^channel@([0-9]|1[0-5])$":
+    type: object
+    description: |
+      Represents the external channels which are connected to the device.
+
+    properties:
+      reg:
+        maxItems: 1
+        description: |
+          The channel number.
+
+      label:
+        description: |
+          Unique name to identify which channel this is.
+    required:
+      - reg
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7768-1";
+            reg = <0>;
+            spi-max-frequency = <2000000>;
+            spi-cpol;
+            spi-cpha;
+            vref-supply = <&adc_vref>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-parent = <&gpio>;
+            adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            clocks = <&ad7768_mclk>;
+            clock-names = "mclk";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+                label = "channel_0";
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index 9acde6d2e2d9..a67ba67dab51 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -67,6 +67,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
new file mode 100644
index 000000000000..07f9d1c09c7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7923.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs.
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908,
+   AD7918, AD7928 8 Channels ADCs.
+
+  Specifications about the part can be found at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7923.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7904_7914_7924.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7908_7918_7928.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7904
+      - adi,ad7914
+      - adi,ad7923
+      - adi,ad7924
+      - adi,ad7908
+      - adi,ad7918
+      - adi,ad7928
+
+  reg:
+    maxItems: 1
+
+  refin-supply:
+    description: |
+      The regulator supply for ADC reference voltage.
+
+  adi,range-double:
+    description: Sets the analog input range from 0 to 2xVREF.
+    type: boolean
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7928: adc@0 {
+        compatible = "adi,ad7928";
+        reg = <0>;
+        spi-max-frequency = <25000000>;
+        refin-supply = <&adc_vref>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
new file mode 100644
index 000000000000..9ee4d977c5ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7949.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7949/AD7682/AD7689 analog to digital converters
+
+maintainers:
+  - Charles-Antoine Couret <charles-antoine.couret@essensium.com>
+
+description: |
+  Specifications on the converters can be found at:
+    AD7949:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7949.pdf
+    AD7682/AD7698:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7682_7689.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7682
+      - adi,ad7689
+      - adi,ad7949
+
+  reg:
+    maxItems: 1
+
+  vrefin-supply:
+    description:
+      Buffered ADC reference voltage supply.
+
+  vref-supply:
+    description:
+      Unbuffered ADC reference voltage supply.
+
+  adi,internal-ref-microvolt:
+    description: |
+      Internal reference voltage selection in microvolts.
+
+      If no internal reference is specified, the channel will default to the
+      external reference defined by vrefin-supply (or vref-supply).
+      vrefin-supply will take precedence over vref-supply if both are defined.
+
+      If no supplies are defined, the reference selection will default to
+      4096mV internal reference.
+
+    enum: [2500000, 4096000]
+    default: 4096000
+
+
+  '#io-channel-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ad7949";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+        };
+
+        adc@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ad7949";
+            reg = <1>;
+            vrefin-supply = <&vdd_supply>;
+        };
+
+        adc@2 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ad7949";
+            reg = <2>;
+            adi,internal-ref-microvolt = <4096000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
new file mode 100644
index 000000000000..29641ce7175b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad799x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD799x analog to digital converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+
+description: |
+    Support for Analog Devices AD7991, AD7992, AD7993, AD7994, AD7995, AD7997, AD7998,
+    AD7999 and similar analog to digital converters.
+    Specifications on the converters can be found at:
+    AD7991, AD7995, AD7999:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7991_7995_7999.pdf
+    AD7992:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7992.pdf
+    AD7993, AD7994:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7993_7994.pdf
+    AD7997, AD7998:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7997_7998.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7991
+      - adi,ad7992
+      - adi,ad7993
+      - adi,ad7994
+      - adi,ad7995
+      - adi,ad7997
+      - adi,ad7998
+      - adi,ad7999
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply:
+    description:
+      ADC power supply
+
+  vref-supply:
+    description:
+      ADC reference voltage supply, optional for AD7991, AD7995 and AD7999
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+       adc1: adc@28 {
+               reg = <0x28>;
+               compatible = "adi,ad7991";
+               interrupts = <13 2>;
+               interrupt-parent = <&gpio6>;
+
+               vcc-supply = <&vcc_3v3>;
+               vref-supply = <&adc_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
new file mode 100644
index 000000000000..2d72ff6bcbc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad9467.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD9467 and similar High-Speed ADCs
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  The AD9467 and the parts similar with it, are high-speed analog-to-digital
+  converters (ADCs), operating in the range of 100 to 500 mega samples
+  per second (MSPS). Some parts support higher MSPS and some
+  lower MSPS, suitable for the intended application of each part.
+
+  All the parts support the register map described by Application Note AN-877
+   https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9265.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9434.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad9265
+      - adi,ad9434
+      - adi,ad9467
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc-clk
+
+  powerdown-gpios:
+    description:
+      Pin that controls the powerdown mode of the device.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reset pin for the device.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad9467";
+          reg = <0>;
+          clocks = <&adc_clk>;
+          clock-names = "adc-clk";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
new file mode 100644
index 000000000000..8e25773d69be
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI ADC IP core
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices Generic AXI ADC IP core for interfacing an ADC device
+  with a high speed serial (JESD204B/C) or source synchronous parallel
+  interface (LVDS/CMOS).
+  Usually, some other interface type (i.e SPI) is used as a control
+  interface for the actual ADC, while this IP core will interface
+  to the data-lines of the ADC and handle the streaming of data into
+  memory via DMA.
+
+  https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-adc-10.0.a
+
+  reg:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: rx
+
+  adi,adc-dev:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A reference to a the actual ADC to which this FPGA ADC interfaces to.
+
+required:
+  - compatible
+  - dmas
+  - reg
+  - adi,adc-dev
+
+additionalProperties: false
+
+examples:
+  - |
+    axi-adc@44a00000 {
+          compatible = "adi,axi-adc-10.0.a";
+          reg = <0x44a00000 0x10000>;
+          dmas = <&rx_dma 0>;
+          dma-names = "rx";
+
+          adi,adc-dev = <&spi_adc>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ads1015.txt b/Documentation/devicetree/bindings/iio/adc/ads1015.txt
deleted file mode 100644
index 918a507d1159..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ads1015.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-ADS1015 (I2C)
-
-This device is a 12-bit A-D converter with 4 inputs.
-
-The inputs can be used single ended or in certain differential combinations.
-
-For configuration all possible combinations are mapped to 8 channels:
-  0: Voltage over AIN0 and AIN1.
-  1: Voltage over AIN0 and AIN3.
-  2: Voltage over AIN1 and AIN3.
-  3: Voltage over AIN2 and AIN3.
-  4: Voltage over AIN0 and GND.
-  5: Voltage over AIN1 and GND.
-  6: Voltage over AIN2 and GND.
-  7: Voltage over AIN3 and GND.
-
-Each channel can be configured individually:
- - pga is the programmable gain amplifier (values are full scale)
-    0: +/- 6.144 V
-    1: +/- 4.096 V
-    2: +/- 2.048 V (default)
-    3: +/- 1.024 V
-    4: +/- 0.512 V
-    5: +/- 0.256 V
- - data_rate in samples per second
-    0: 128
-    1: 250
-    2: 490
-    3: 920
-    4: 1600 (default)
-    5: 2400
-    6: 3300
-
-1) The /ads1015 node
-
-  Required properties:
-
-   - compatible : must be "ti,ads1015"
-   - reg : I2C bus address of the device
-   - #address-cells : must be <1>
-   - #size-cells : must be <0>
-
-  The node contains child nodes for each channel that the platform uses.
-
-  Example ADS1015 node:
-
-    ads1015@49 {
-	    compatible = "ti,ads1015";
-	    reg = <0x49>;
-	    #address-cells = <1>;
-	    #size-cells = <0>;
-
-	    [ child node definitions... ]
-    }
-
-2) channel nodes
-
-  Required properties:
-
-   - reg : the channel number
-
-  Optional properties:
-
-   - ti,gain : the programmable gain amplifier setting
-   - ti,datarate : the converter data rate
-
-  Example ADS1015 channel node:
-
-    channel@4 {
-	    reg = <4>;
-	    ti,gain = <3>;
-	    ti,datarate = <5>;
-    };
diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
deleted file mode 100644
index d57e9df25f4f..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Amlogic Meson SAR (Successive Approximation Register) A/D converter
-
-Required properties:
-- compatible:	depending on the SoC this should be one of:
-			- "amlogic,meson8-saradc" for Meson8
-			- "amlogic,meson8b-saradc" for Meson8b
-			- "amlogic,meson8m2-saradc" for Meson8m2
-			- "amlogic,meson-gxbb-saradc" for GXBB
-			- "amlogic,meson-gxl-saradc" for GXL
-			- "amlogic,meson-gxm-saradc" for GXM
-			- "amlogic,meson-axg-saradc" for AXG
-			- "amlogic,meson-g12a-saradc" for AXG
-		along with the generic "amlogic,meson-saradc"
-- reg:		the physical base address and length of the registers
-- interrupts:	the interrupt indicating end of sampling
-- clocks:	phandle and clock identifier (see clock-names)
-- clock-names:	mandatory clocks:
-			- "clkin" for the reference clock (typically XTAL)
-			- "core" for the SAR ADC core clock
-		optional clocks:
-			- "adc_clk" for the ADC (sampling) clock
-			- "adc_sel" for the ADC (sampling) clock mux
-- vref-supply:	the regulator supply for the ADC reference voltage
-- #io-channel-cells: must be 1, see ../iio-bindings.txt
-
-Optional properties:
-- amlogic,hhi-sysctrl:	phandle to the syscon which contains the 5th bit
-			of the TSC (temperature sensor coefficient) on
-			Meson8b and Meson8m2 (which used to calibrate the
-			temperature sensor)
-- nvmem-cells:		phandle to the temperature_calib eFuse cells
-- nvmem-cell-names:	if present (to enable the temperature sensor
-			calibration) this must contain "temperature_calib"
-
-
-Example:
-	saradc: adc@8680 {
-		compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
-		#io-channel-cells = <1>;
-		reg = <0x0 0x8680 0x0 0x34>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&xtal>,
-			 <&clkc CLKID_SAR_ADC>,
-			 <&clkc CLKID_SANA>,
-			 <&clkc CLKID_SAR_ADC_CLK>,
-			 <&clkc CLKID_SAR_ADC_SEL>;
-		clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
new file mode 100644
index 000000000000..7e8328e9ce13
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/amlogic,meson-saradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SAR (Successive Approximation Register) A/D converter
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description:
+  Binding covers a range of ADCs found on Amlogic Meson SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-saradc
+      - items:
+          - enum:
+              - amlogic,meson8-saradc
+              - amlogic,meson8b-saradc
+              - amlogic,meson8m2-saradc
+              - amlogic,meson-gxbb-saradc
+              - amlogic,meson-gxl-saradc
+              - amlogic,meson-gxm-saradc
+              - amlogic,meson-axg-saradc
+              - amlogic,meson-g12a-saradc
+          - const: amlogic,meson-saradc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Interrupt indicates end of sampling.
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: clkin
+      - const: core
+      - const: adc_clk
+      - const: adc_sel
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+  amlogic,hhi-sysctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Syscon which contains the 5th bit of the TSC (temperature sensor
+      coefficient) on Meson8b and Meson8m2 (which used to calibrate the
+      temperature sensor)
+
+  nvmem-cells:
+    description: phandle to the temperature_calib eFuse cells
+    maxItems: 1
+
+  nvmem-cell-names:
+    const: temperature_calib
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8-saradc
+              - amlogic,meson8b-saradc
+              - amlogic,meson8m2-saradc
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+    else:
+      properties:
+        nvmem-cells: false
+        mvmem-cel-names: false
+        clocks:
+          minItems: 4
+        clock-names:
+          minItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8b-saradc
+              - amlogic,meson8m2-saradc
+    then:
+      properties:
+        amlogic,hhi-sysctrl: true
+    else:
+      properties:
+        amlogic,hhi-sysctrl: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/gxbb-clkc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        adc@8680 {
+            compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+            #io-channel-cells = <1>;
+            reg = <0x0 0x8680 0x0 0x34>;
+            interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&xtal>,
+                <&clkc CLKID_SAR_ADC>,
+                <&clkc CLKID_SAR_ADC_CLK>,
+                <&clkc CLKID_SAR_ADC_SEL>;
+            clock-names = "clkin", "core", "adc_clk", "adc_sel";
+        };
+        adc@9680 {
+            compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
+            #io-channel-cells = <1>;
+            reg = <0x0 0x9680 0x0 0x34>;
+            interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+            clock-names = "clkin", "core";
+            nvmem-cells = <&tsens_caldata>;
+            nvmem-cell-names = "temperature_calib";
+            amlogic,hhi-sysctrl = <&hhi>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml
new file mode 100644
index 000000000000..a726b6c2ab65
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2400-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC that forms part of an ASPEED server management processor.
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+description:
+  This device is a 10-bit converter for 16 voltage channels.  All inputs are
+  single ended.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-adc
+      - aspeed,ast2500-adc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Input clock used to derive the sample clock. Expected to be the
+      SoC's APB clock.
+
+  resets:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    adc@1e6e9000 {
+        compatible = "aspeed,ast2400-adc";
+        reg = <0x1e6e9000 0xb0>;
+        clocks = <&syscon ASPEED_CLK_APB>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
new file mode 100644
index 000000000000..b283c8ca2bbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC that forms part of an ASPEED server management processor.
+
+maintainers:
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |
+  • 10-bits resolution for 16 voltage channels.
+  • The device split into two individual engine and each contains 8 voltage
+  channels.
+  • Channel scanning can be non-continuous.
+  • Programmable ADC clock frequency.
+  • Programmable upper and lower threshold for each channels.
+  • Interrupt when larger or less than threshold for each channels.
+  • Support hysteresis for each channels.
+  • Built-in a compensating method.
+  • Built-in a register to trim internal reference voltage.
+  • Internal or External reference voltage.
+  • Support 2 Internal reference voltage 1.2v or 2.5v.
+  • Integrate dividing circuit for battery sensing.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-adc0
+      - aspeed,ast2600-adc1
+    description:
+      Their trimming data, which is used to calibrate internal reference volage,
+      locates in different address of OTP.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Input clock used to derive the sample clock. Expected to be the
+      SoC's APB clock.
+
+  resets:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  vref-supply:
+    description:
+      The external regulator supply ADC reference voltage.
+
+  aspeed,int-vref-microvolt:
+    enum: [1200000, 2500000]
+    description:
+      ADC internal reference voltage in microvolts.
+
+  aspeed,battery-sensing:
+    type: boolean
+    description:
+      Inform the driver that last channel will be used to sensor battery.
+
+  aspeed,trim-data-valid:
+    type: boolean
+    description: |
+      The ADC reference voltage can be calibrated to obtain the trimming
+      data which will be stored in otp. This property informs the driver that
+      the data store in the otp is valid.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    adc0: adc@1e6e9000 {
+        compatible = "aspeed,ast2600-adc0";
+        reg = <0x1e6e9000 0x100>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+        aspeed,int-vref-microvolt = <2500000>;
+    };
+    adc1: adc@1e6e9100 {
+        compatible = "aspeed,ast2600-adc1";
+        reg = <0x1e6e9100 0x100>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+        aspeed,int-vref-microvolt = <2500000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
deleted file mode 100644
index 034fc2ba100e..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Aspeed ADC
-
-This device is a 10-bit converter for 16 voltage channels.  All inputs are
-single ended.
-
-Required properties:
-- compatible: Should be "aspeed,ast2400-adc" or "aspeed,ast2500-adc"
-- reg: memory window mapping address and length
-- clocks: Input clock used to derive the sample clock. Expected to be the
-          SoC's APB clock.
-- resets: Reset controller phandle
-- #io-channel-cells: Must be set to <1> to indicate channels are selected
-                     by index.
-
-Example:
-	adc@1e6e9000 {
-		compatible = "aspeed,ast2400-adc";
-		reg = <0x1e6e9000 0xb0>;
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_ADC>;
-		#io-channel-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
deleted file mode 100644
index 07c59f301b31..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* AT91 SAMA5D2 Analog to Digital Converter (ADC)
-
-Required properties:
-  - compatible: Should be "atmel,sama5d2-adc" or "microchip,sam9x60-adc".
-  - reg: Should contain ADC registers location and length.
-  - interrupts: Should contain the IRQ line for the ADC.
-  - clocks: phandle to device clock.
-  - clock-names: Must be "adc_clk".
-  - vref-supply: Supply used as reference for conversions.
-  - vddana-supply: Supply for the adc device.
-  - atmel,min-sample-rate-hz: Minimum sampling rate, it depends on SoC.
-  - atmel,max-sample-rate-hz: Maximum sampling rate, it depends on SoC.
-  - atmel,startup-time-ms: Startup time expressed in ms, it depends on SoC.
-  - atmel,trigger-edge-type: One of possible edge types for the ADTRG hardware
-  trigger pin. When the specific edge type is detected, the conversion will
-  start. Possible values are rising, falling, or both.
-  This property uses the IRQ edge types values: IRQ_TYPE_EDGE_RISING ,
-  IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH
-
-Optional properties:
-  - dmas: Phandle to dma channel for the ADC.
-  - dma-names: Must be "rx" when dmas property is being used.
-  See ../../dma/dma.txt for details.
-  - #io-channel-cells: in case consumer drivers are attached, this must be 1.
-  See <Documentation/devicetree/bindings/iio/iio-bindings.txt> for details.
-
-Properties for consumer drivers:
-  - Consumer drivers can be connected to this producer device, as specified
-  in <Documentation/devicetree/bindings/iio/iio-bindings.txt>
-  - Channels exposed are specified in:
-  <dt-bindings/iio/adc/at91-sama5d2_adc.txt>
-
-Example:
-
-adc: adc@fc030000 {
-	compatible = "atmel,sama5d2-adc";
-	reg = <0xfc030000 0x100>;
-	interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
-	clocks = <&adc_clk>;
-	clock-names = "adc_clk";
-	atmel,min-sample-rate-hz = <200000>;
-	atmel,max-sample-rate-hz = <20000000>;
-	atmel,startup-time-ms = <4>;
-	vddana-supply = <&vdd_3v3_lp_reg>;
-	vref-supply = <&vdd_3v3_lp_reg>;
-	atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
-	dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
-	dma-names = "rx";
-	#io-channel-cells = <1>;
-}
diff --git a/Documentation/devicetree/bindings/iio/adc/at91_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91_adc.txt
deleted file mode 100644
index f65b04fb7962..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/at91_adc.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-* AT91's Analog to Digital Converter (ADC)
-
-Required properties:
-  - compatible: Should be "atmel,<chip>-adc"
-    <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5"
-  - reg: Should contain ADC registers location and length
-  - interrupts: Should contain the IRQ line for the ADC
-  - clock-names: tuple listing input clock names.
-	Required elements: "adc_clk", "adc_op_clk".
-  - clocks: phandles to input clocks.
-  - atmel,adc-channels-used: Bitmask of the channels muxed and enabled for this
-    device
-  - atmel,adc-startup-time: Startup Time of the ADC in microseconds as
-    defined in the datasheet
-  - atmel,adc-vref: Reference voltage in millivolts for the conversions
-  - atmel,adc-res: List of resolutions in bits supported by the ADC. List size
-		   must be two at least.
-  - atmel,adc-res-names: Contains one identifier string for each resolution
-			 in atmel,adc-res property. "lowres" and "highres"
-			 identifiers are required.
-
-Optional properties:
-  - atmel,adc-use-external-triggers: Boolean to enable the external triggers
-  - atmel,adc-use-res: String corresponding to an identifier from
-		       atmel,adc-res-names property. If not specified, the highest
-		       resolution will be used.
-  - atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion
-  - atmel,adc-sample-hold-time: Sample and Hold Time in microseconds
-  - atmel,adc-ts-wires: Number of touchscreen wires. Should be 4 or 5. If this
-                        value is set, then the adc driver will enable touchscreen
-                        support.
-    NOTE: when adc touchscreen is enabled, the adc hardware trigger will be
-          disabled. Since touchscreen will occupy the trigger register.
-  - atmel,adc-ts-pressure-threshold: a pressure threshold for touchscreen. It
-                                     makes touch detection more precise.
-
-Optional trigger Nodes:
-  - Required properties:
-    * trigger-name: Name of the trigger exposed to the user
-    * trigger-value: Value to put in the Trigger register
-      to activate this trigger
-  - Optional properties:
-    * trigger-external: Is the trigger an external trigger?
-
-Examples:
-adc0: adc@fffb0000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "atmel,at91sam9260-adc";
-	reg = <0xfffb0000 0x100>;
-	interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-	clocks = <&adc_clk>, <&adc_op_clk>;
-	clock-names = "adc_clk", "adc_op_clk";
-	atmel,adc-channels-used = <0xff>;
-	atmel,adc-startup-time = <40>;
-	atmel,adc-use-external-triggers;
-	atmel,adc-vref = <3300>;
-	atmel,adc-res = <8 10>;
-	atmel,adc-res-names = "lowres", "highres";
-	atmel,adc-use-res = "lowres";
-
-	trigger0 {
-		trigger-name = "external-rising";
-		trigger-value = <0x1>;
-		trigger-external;
-	};
-	trigger1 {
-		trigger-name = "external-falling";
-		trigger-value = <0x2>;
-		trigger-external;
-	};
-
-	trigger2 {
-		trigger-name = "external-any";
-		trigger-value = <0x3>;
-		trigger-external;
-	};
-
-	trigger3 {
-		trigger-name = "continuous";
-		trigger-value = <0x6>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
new file mode 100644
index 000000000000..31f840d59303
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/atmel,sama5d2-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AT91 SAMA5D2 Analog to Digital Converter (ADC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - atmel,sama5d2-adc
+      - microchip,sam9x60-adc
+      - microchip,sama7g5-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: adc_clk
+
+  vref-supply: true
+  vddana-supply: true
+
+  atmel,min-sample-rate-hz:
+    description: Minimum sampling rate, it depends on SoC.
+
+  atmel,max-sample-rate-hz:
+    description: Maximum sampling rate, it depends on SoC.
+
+  atmel,startup-time-ms:
+    description: Startup time expressed in ms, it depends on SoC.
+
+  atmel,trigger-edge-type:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description:
+      One of possible edge types for the ADTRG hardware trigger pin.
+      When the specific edge type is detected, the conversion will
+      start. Should be one of IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING
+      or IRQ_TYPE_EDGE_BOTH.
+    enum: [1, 2, 3]
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  "#io-channel-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - vddana-supply
+  - atmel,min-sample-rate-hz
+  - atmel,max-sample-rate-hz
+  - atmel,startup-time-ms
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        adc@fc030000 {
+            compatible = "atmel,sama5d2-adc";
+            reg = <0xfc030000 0x100>;
+            interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+            clocks = <&adc_clk>;
+            clock-names = "adc_clk";
+            atmel,min-sample-rate-hz = <200000>;
+            atmel,max-sample-rate-hz = <20000000>;
+            atmel,startup-time-ms = <4>;
+            vddana-supply = <&vdd_3v3_lp_reg>;
+            vref-supply = <&vdd_3v3_lp_reg>;
+            atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
+            dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
+            dma-names = "rx";
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml
new file mode 100644
index 000000000000..e6a1f915b542
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/atmel,sama9260-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AT91 sama9260 and similar Analog to Digital Converter (ADC)
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9260-adc
+      - atmel,at91sam9rl-adc
+      - atmel,at91sam9g45-adc
+      - atmel,at91sam9x5-adc
+      - atmel,at91sama5d3-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: adc_clk
+      - const: adc_op_clk
+
+  atmel,adc-channels-used:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Bitmask of the channels muxed and enabled for this device
+
+  atmel,adc-startup-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Startup Time of the ADC in microseconds as defined in the datasheet
+
+  atmel,adc-vref:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Reference voltage in millivolts for the conversions
+
+  atmel,adc-use-external-triggers:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enable the external triggers
+
+  atmel,adc-use-res:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      String corresponding to an identifier from atmel,adc-res-names property.
+      If not specified, the highest resolution will be used.
+    enum:
+      - "lowres"
+      - "highres"
+
+  atmel,adc-sleep-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enable sleep mode when no conversion
+
+  atmel,adc-sample-hold-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sample and Hold Time in microseconds
+
+  atmel,adc-ts-wires:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Number of touchscreen wires. Must be set to enable touchscreen.
+      NOTE: when adc touchscreen is enabled, the adc hardware trigger will be
+      disabled. Since touchscreen will occupy the trigger register.
+    enum:
+      - 4
+      - 5
+
+  atmel,adc-ts-pressure-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Pressure threshold for touchscreen.
+
+  "#io-channel-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - atmel,adc-channels-used
+  - atmel,adc-startup-time
+  - atmel,adc-vref
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        adc@fffb0000 {
+            compatible = "atmel,at91sam9260-adc";
+            reg = <0xfffb0000 0x100>;
+            interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+            clocks = <&adc_clk>, <&adc_op_clk>;
+            clock-names = "adc_clk", "adc_op_clk";
+            atmel,adc-channels-used = <0xff>;
+            atmel,adc-startup-time = <40>;
+            atmel,adc-use-external-triggers;
+            atmel,adc-vref = <3300>;
+            atmel,adc-use-res = "lowres";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
index 91ab9c842273..77605f17901c 100644
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
@@ -53,6 +53,8 @@ required:
   - dout-gpios
   - avdd-supply
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt b/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt
deleted file mode 100644
index 7a6313913923..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* X-Powers AXP ADC bindings
-
-Required properties:
-  - compatible: should be one of:
-    - "x-powers,axp209-adc",
-    - "x-powers,axp221-adc",
-    - "x-powers,axp813-adc",
-  - #io-channel-cells: should be 1,
-
-Example:
-
-&axp22x {
-	adc {
-		compatible = "x-powers,axp221-adc";
-		#io-channel-cells = <1>;
-	};
-};
-
-ADC channels and their indexes per variant:
-
-AXP209
-------
- 0 | acin_v
- 1 | acin_i
- 2 | vbus_v
- 3 | vbus_i
- 4 | pmic_temp
- 5 | gpio0_v
- 6 | gpio1_v
- 7 | ipsout_v
- 8 | batt_v
- 9 | batt_chrg_i
-10 | batt_dischrg_i
-
-AXP22x
-------
- 0 | pmic_temp
- 1 | batt_v
- 2 | batt_chrg_i
- 3 | batt_dischrg_i
-
-AXP813
-------
- 0 | pmic_temp
- 1 | gpio0_v
- 2 | batt_v
- 3 | batt_chrg_i
- 4 | batt_dischrg_i
diff --git a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
deleted file mode 100644
index 908334c6b07f..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Berlin Analog to Digital Converter (ADC)
-
-The Berlin ADC has 8 channels, with one connected to a temperature sensor.
-It is part of the system controller register set. The ADC node should be a
-sub-node of the system controller node.
-
-Required properties:
-- compatible: must be "marvell,berlin2-adc"
-- interrupts: the interrupts for the ADC and the temperature sensor
-- interrupt-names: should be "adc" and "tsen"
-
-Example:
-
-adc: adc {
-	compatible = "marvell,berlin2-adc";
-	interrupt-parent = <&sic>;
-	interrupts = <12>, <14>;
-	interrupt-names = "adc", "tsen";
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
deleted file mode 100644
index 7b1b1e4086d4..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Broadcom's IPROC Static ADC controller
-
-Broadcom iProc ADC controller has 8 channels 10bit ADC.
-Allows user to convert analog input voltage values to digital.
-
-Required properties:
-
-- compatible: Must be "brcm,iproc-static-adc"
-
-- adc-syscon: Handler of syscon node defining physical base address of the
-  controller and length of memory mapped region.
-
-- #io-channel-cells = <1>; As ADC has multiple outputs
-  refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
-
-- io-channel-ranges:
-  refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
-
-- clocks: Clock used for this block.
-
-- clock-names: Clock name should be given as tsc_clk.
-
-- interrupts: interrupt line number.
-
-For example:
-
-	ts_adc_syscon: ts_adc_syscon@180a6000 {
-		compatible = "brcm,iproc-ts-adc-syscon","syscon";
-		reg = <0x180a6000 0xc30>;
-	};
-
-	adc: adc@180a6000 {
-		compatible = "brcm,iproc-static-adc";
-		adc-syscon = <&ts_adc_syscon>;
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
-		clock-names = "tsc_clk";
-		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml
new file mode 100644
index 000000000000..547697e8bc8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/brcm,iproc-static-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's IPROC Static ADC controller
+
+maintainers:
+  - Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
+
+description: |
+  Broadcom iProc ADC controller has 8 10bit channels
+
+properties:
+  compatible:
+    const: brcm,iproc-static-adc
+
+  adc-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      syscon node defining physical base address of the controller and length
+      of memory mapped region.
+
+  "#io-channel-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: tsc_clk
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - adc-syscon
+  - "#io-channel-cells"
+  - clocks
+  - clock-names
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm-cygnus.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        adc {
+            compatible = "brcm,iproc-static-adc";
+            adc-syscon = <&ts_adc_syscon>;
+            #io-channel-cells = <1>;
+            clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+            clock-names = "tsc_clk";
+            interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt b/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt
deleted file mode 100644
index 904f76de9055..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Cosmic Circuits - Analog to Digital Converter (CC-10001-ADC)
-
-Required properties:
-  - compatible: Should be "cosmic,10001-adc"
-  - reg: Should contain adc registers location and length.
-  - clock-names: Should contain "adc".
-  - clocks: Should contain a clock specifier for each entry in clock-names
-  - vref-supply: The regulator supply ADC reference voltage.
-
-Optional properties:
-  - adc-reserved-channels: Bitmask of reserved channels,
-    i.e. channels that cannot be used by the OS.
-
-Example:
-adc: adc@18101600 {
-	compatible = "cosmic,10001-adc";
-	reg = <0x18101600 0x24>;
-	adc-reserved-channels = <0x2>;
-	clocks = <&adc_clk>;
-	clock-names = "adc";
-	vref-supply = <&reg_1v8>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
new file mode 100644
index 000000000000..4e695b97d015
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/cosmic,10001-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cosmic Circuits CC-10001 ADC
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Cosmic Circuits 10001 10-bit ADC device.
+
+properties:
+  compatible:
+    const: cosmic,10001-adc
+
+  reg:
+    maxItems: 1
+
+  adc-reserved-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitmask of reserved channels, i.e. channels that cannot be
+      used by the OS.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: adc
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    adc@18101600 {
+        compatible = "cosmic,10001-adc";
+        reg = <0x18101600 0x24>;
+        adc-reserved-channels = <0x2>;
+        clocks = <&adc_clk>;
+        clock-names = "adc";
+        vref-supply = <&reg_1v8>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
deleted file mode 100644
index ec04008e8f4f..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Motorola CPCAP PMIC ADC binding
-
-Required properties:
-- compatible: Should be "motorola,cpcap-adc" or "motorola,mapphone-cpcap-adc"
-- interrupts: The interrupt number for the ADC device
-- interrupt-names: Should be "adcdone"
-- #io-channel-cells: Number of cells in an IIO specifier
-
-Example:
-
-cpcap_adc: adc {
-	compatible = "motorola,mapphone-cpcap-adc";
-	interrupt-parent = <&cpcap>;
-	interrupts = <8 IRQ_TYPE_NONE>;
-	interrupt-names = "adcdone";
-	#io-channel-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt b/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt
deleted file mode 100644
index c07228da92ac..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Dialog Semiconductor DA9150 IIO GPADC bindings
-
-Required properties:
-- compatible: "dlg,da9150-gpadc" for DA9150 IIO GPADC
-- #io-channel-cells: Should be set to <1>
-  (See Documentation/devicetree/bindings/iio/iio-bindings.txt for further info)
-
-For further information on GPADC channels, see device datasheet.
-
-
-Example:
-
-	gpadc: da9150-gpadc {
-		compatible = "dlg,da9150-gpadc";
-		#io-channel-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml
new file mode 100644
index 000000000000..cc29a2f2111a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/dlg,da9150-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 IIO GPADC
+
+maintainers:
+  - Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
+
+description:
+  This patch adds support for general purpose ADC within the
+  DA9150 Charger & Fuel-Gauge IC.
+
+properties:
+  compatible:
+    const: dlg,da9150-gpadc
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+        compatible = "dlg,da9150-gpadc";
+        #io-channel-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt b/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
deleted file mode 100644
index 27544bdd4478..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Bindings for ADC envelope detector using a DAC and a comparator
-
-The DAC is used to find the peak level of an alternating voltage input
-signal by a binary search using the output of a comparator wired to
-an interrupt pin. Like so:
-                          _
-                         | \
-    input +------>-------|+ \
-                         |   \
-           .-------.     |    }---.
-           |       |     |   /    |
-           |    dac|-->--|- /     |
-           |       |     |_/      |
-           |       |              |
-           |       |              |
-           |    irq|------<-------'
-           |       |
-           '-------'
-
-Required properties:
-- compatible: Should be "axentia,tse850-envelope-detector"
-- io-channels: Channel node of the dac to be used for comparator input.
-- io-channel-names: Should be "dac".
-- interrupt specification for one client interrupt,
-  see ../../interrupt-controller/interrupts.txt for details.
-- interrupt-names: Should be "comp".
-
-Example:
-
-	&i2c {
-		dpot: mcp4651-104@28 {
-			compatible = "microchip,mcp4651-104";
-			reg = <0x28>;
-			#io-channel-cells = <1>;
-		};
-	};
-
-	dac: dac {
-		compatible = "dpot-dac";
-		vref-supply = <&reg_3v3>;
-		io-channels = <&dpot 0>;
-		io-channel-names = "dpot";
-		#io-channel-cells = <1>;
-	};
-
-	envelope-detector {
-		compatible = "axentia,tse850-envelope-detector";
-		io-channels = <&dac 0>;
-		io-channel-names = "dac";
-
-		interrupt-parent = <&gpio>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-names = "comp";
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/envelope-detector.yaml b/Documentation/devicetree/bindings/iio/adc/envelope-detector.yaml
new file mode 100644
index 000000000000..296d5459b40a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/envelope-detector.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/envelope-detector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC envelope detector using a DAC and a comparator
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  The DAC is used to find the peak level of an alternating voltage input
+  signal by a binary search using the output of a comparator wired to
+  an interrupt pin. Like so:
+                          _
+                         | \
+    input +------>-------|+ \
+                         |   \
+           .-------.     |    }---.
+           |       |     |   /    |
+           |    dac|-->--|- /     |
+           |       |     |_/      |
+           |       |              |
+           |       |              |
+           |    irq|------<-------'
+           |       |
+           '-------'
+
+properties:
+  compatible:
+    const: axentia,tse850-envelope-detector
+
+  io-channels:
+    maxItems: 1
+    description: Channel node of the dac to be used for comparator input.
+
+  io-channel-names:
+    const: dac
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: comp
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dpot: dpot@28 {
+            compatible = "microchip,mcp4651-104";
+            reg = <0x28>;
+            #io-channel-cells = <1>;
+        };
+    };
+
+    dac: dac {
+        compatible = "dpot-dac";
+        vref-supply = <&reg_3v3>;
+        io-channels = <&dpot 0>;
+        io-channel-names = "dpot";
+        #io-channel-cells = <1>;
+    };
+
+    envelope-detector {
+        compatible = "axentia,tse850-envelope-detector";
+        io-channels = <&dac 0>;
+        io-channel-names = "dac";
+
+        interrupt-parent = <&gpio>;
+        interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "comp";
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
deleted file mode 100644
index eebdcec3dab5..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Freescale i.MX25 ADC GCQ device
-
-This is a generic conversion queue device that can convert any of the
-analog inputs using the ADC unit of the i.MX25.
-
-Required properties:
- - compatible: Should be "fsl,imx25-gcq".
- - reg: Should be the register range of the module.
- - interrupts: Should be the interrupt number of the module.
-   Typically this is <1>.
- - #address-cells: Should be <1> (setting for the subnodes)
- - #size-cells: Should be <0> (setting for the subnodes)
-
-Optional properties:
- - vref-ext-supply: The regulator supplying the ADC reference voltage.
-   Required when at least one subnode uses the this reference.
- - vref-xp-supply: The regulator supplying the ADC reference voltage on pin XP.
-   Required when at least one subnode uses this reference.
- - vref-yp-supply: The regulator supplying the ADC reference voltage on pin YP.
-   Required when at least one subnode uses this reference.
-
-Sub-nodes:
-Optionally you can define subnodes which define the reference voltage
-for the analog inputs.
-
-Required properties for subnodes:
- - reg: Should be the number of the analog input.
-     0: xp
-     1: yp
-     2: xn
-     3: yn
-     4: wiper
-     5: inaux0
-     6: inaux1
-     7: inaux2
-Optional properties for subnodes:
- - fsl,adc-refp: specifies the positive reference input as defined in
-     <dt-bindings/iio/adc/fsl-imx25-gcq.h>
- - fsl,adc-refn: specifies the negative reference input as defined in
-     <dt-bindings/iio/adc/fsl-imx25-gcq.h>
-
-Example:
-
-	adc: adc@50030800 {
-		compatible = "fsl,imx25-gcq";
-		reg = <0x50030800 0x60>;
-		interrupt-parent = <&tscadc>;
-		interrupts = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		inaux@5 {
-			reg = <5>;
-			fsl,adc-refp = <MX25_ADC_REFP_INT>;
-			fsl,adc-refn = <MX25_ADC_REFN_NGND>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml
new file mode 100644
index 000000000000..e9103497e3a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/fsl,imx25-gcq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale ADC GCQ device
+
+description:
+  This is a generic conversion queue device that can convert any of the
+  analog inputs using the ADC unit of the i.MX25.
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: fsl,imx25-gcq
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-ext-supply:
+    description:
+      The regulator supplying the ADC reference voltage.
+      Required when at least one subnode uses the this reference.
+
+  vref-xp-supply:
+    description:
+      The regulator supplying the ADC reference voltage on pin XP.
+      Required when at least one subnode uses this reference.
+
+  vref-yp-supply:
+    description:
+      The regulator supplying the ADC reference voltage on pin YP.
+      Required when at least one subnode uses this reference.
+
+  "#io-channel-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "[a-z][a-z0-9]+@[0-9a-f]+$":
+    type: object
+    description:
+      Child nodes used to define the reference voltages used for each channel
+
+    properties:
+      reg:
+        description: |
+          Number of the analog input.
+          0: xp
+          1: yp
+          2: xn
+          3: yn
+          4: wiper
+          5: inaux0
+          6: inaux1
+          7: inaux2
+        items:
+          - minimum: 0
+            maximum: 7
+
+      fsl,adc-refp:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Specifies the positive reference input as defined in
+          <dt-bindings/iio/adc/fsl-imx25-gcq.h>
+          0: YP voltage reference
+          1: XP voltage reference
+          2: External voltage reference
+          3: Internal voltage reference (default)
+        minimum: 0
+        maximum: 3
+
+      fsl,adc-refn:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Specifies the negative reference input as defined in
+          <dt-bindings/iio/adc/fsl-imx25-gcq.h>
+          0: XN ground reference
+          1: YN ground reference
+          2: Internal ground reference
+          3: External ground reference (default)
+        minimum: 0
+        maximum: 3
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/fsl-imx25-gcq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@50030800 {
+            compatible = "fsl,imx25-gcq";
+            reg = <0x50030800 0x60>;
+            interrupt-parent = <&tscadc>;
+            interrupts = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            inaux@5 {
+                reg = <5>;
+                fsl,adc-refp = <MX25_ADC_REFP_INT>;
+                fsl,adc-refn = <MX25_ADC_REFN_NGND>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml
new file mode 100644
index 000000000000..afc5cc48a0ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/fsl,imx7d-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale ADC found on the imx7d SoC
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx7d-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: adc
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx7d-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@30610000 {
+            compatible = "fsl,imx7d-adc";
+            reg = <0x30610000 0x10000>;
+            interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+            clock-names = "adc";
+            vref-supply = <&reg_vcc_3v3_mcu>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
new file mode 100644
index 000000000000..c770ff4998f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/fsl,vf610-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC found on Freescale vf610 and similar SoCs
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+
+description:
+  ADCs found on vf610/i.MX6slx and upward SoCs from Freescale.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6sx-adc
+              - fsl,imx6ul-adc
+          - const: fsl,vf610-adc
+      - items:
+          - const: fsl,vf610-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: ADC source clock (ipg clock)
+    maxItems: 1
+
+  clock-names:
+    const: adc
+
+  vref-supply:
+    description: ADC reference voltage supply.
+
+  fsl,adck-max-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 3
+    description: |
+      Maximum frequencies from datasheet operating requirements.
+      Three values necessary to cover the 3 conversion modes.
+      * Frequency in normal mode (ADLPC=0, ADHSC=0)
+      * Frequency in high-speed mode (ADLPC=0, ADHSC=1)
+      * Frequency in low-power mode (ADLPC=1, ADHSC=0)
+
+  min-sample-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Minimum sampling time in nanoseconds. This value has
+      to be chosen according to the conversion mode and the connected analog
+      source resistance (R_as) and capacitance (C_as). Refer the datasheet's
+      operating requirements. A safe default across a wide range of R_as and
+      C_as as well as conversion modes is 1000ns.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+    adc@4003b000 {
+        compatible = "fsl,vf610-adc";
+        reg = <0x4003b000 0x1000>;
+        interrupts = <0 53 0x04>;
+        clocks = <&clks VF610_CLK_ADC0>;
+        clock-names = "adc";
+        fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>;
+        vref-supply = <&reg_vcc_3v3_mcu>;
+        min-sample-time = <10000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/hi8435.txt b/Documentation/devicetree/bindings/iio/adc/hi8435.txt
deleted file mode 100644
index 3b0348c5e516..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/hi8435.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Holt Integrated Circuits HI-8435 threshold detector bindings
-
-Required properties:
- - compatible: should be "holt,hi8435"
- - reg: spi chip select number for the device
-
-Recommended properties:
- - spi-max-frequency: definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Optional properties:
- - gpios: GPIO used for controlling the reset pin
-
-Example:
-sensor@0 {
-	compatible = "holt,hi8435";
-	reg = <0>;
-	gpios = <&gpio6 1 0>;
-
-	spi-max-frequency = <1000000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
new file mode 100644
index 000000000000..56bcbe5dcd79
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/holt,hi8435.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Holt Integrated Circuits HI-8435 SPI threshold detector
+
+maintainers:
+  - Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+
+description: |
+  Datasheet: http://www.holtic.com/documents/427-hi-8435_v-rev-lpdf.do
+
+properties:
+  compatible:
+    const: holt,hi8435
+
+  reg:
+    maxItems: 1
+
+  gpios:
+    description:
+      GPIO used for controlling the reset pin
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        threshold-detector@0 {
+            compatible = "holt,hi8435";
+            reg = <0>;
+            gpios = <&gpio6 1 0>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
deleted file mode 100644
index f1f3a552459b..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Freescale imx7d ADC bindings
-
-The devicetree bindings are for the ADC driver written for
-imx7d SoC.
-
-Required properties:
-- compatible: Should be "fsl,imx7d-adc"
-- reg: Offset and length of the register set for the ADC device
-- interrupts: The interrupt number for the ADC device
-- clocks: The root clock of the ADC controller
-- clock-names: Must contain "adc", matching entry in the clocks property
-- vref-supply: The regulator supply ADC reference voltage
-- #io-channel-cells: Must be 1 as per ../iio-bindings.txt
-
-Example:
-adc1: adc@30610000 {
-	compatible = "fsl,imx7d-adc";
-	reg = <0x30610000 0x10000>;
-	interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-	clock-names = "adc";
-	vref-supply = <&reg_vcc_3v3_mcu>;
-	#io-channel-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
deleted file mode 100644
index cd9048cf9dcf..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Ingenic JZ47xx ADC controller IIO bindings
-
-Required properties:
-
-- compatible: Should be one of:
-  * ingenic,jz4725b-adc
-  * ingenic,jz4740-adc
-  * ingenic,jz4770-adc
-- reg: ADC controller registers location and length.
-- clocks: phandle to the SoC's ADC clock.
-- clock-names: Must be set to "adc".
-- #io-channel-cells: Must be set to <1> to indicate channels are selected
-  by index.
-
-ADC clients must use the format described in iio-bindings.txt, giving
-a phandle and IIO specifier pair ("io-channels") to the ADC controller.
-
-Example:
-
-#include <dt-bindings/iio/adc/ingenic,adc.h>
-
-adc: adc@10070000 {
-	compatible = "ingenic,jz4740-adc";
-	#io-channel-cells = <1>;
-
-	reg = <0x10070000 0x30>;
-
-	clocks = <&cgu JZ4740_CLK_ADC>;
-	clock-names = "adc";
-
-	interrupt-parent = <&intc>;
-	interrupts = <18>;
-};
-
-adc-keys {
-	...
-	compatible = "adc-keys";
-	io-channels = <&adc INGENIC_ADC_AUX>;
-	io-channel-names = "buttons";
-	...
-};
-
-battery {
-	...
-	compatible = "ingenic,jz4740-battery";
-	io-channels = <&adc INGENIC_ADC_BATTERY>;
-	io-channel-names = "battery";
-	...
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
new file mode 100644
index 000000000000..698beb896f76
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Ingenic JZ47xx ADC controller IIO bindings
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+description: >
+  Industrial I/O subsystem bindings for ADC controller found in
+  Ingenic JZ47xx SoCs.
+
+  ADC clients must use the format described in
+  https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml,
+  giving a phandle and IIO specifier pair ("io-channels") to the ADC controller.
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4725b-adc
+      - ingenic,jz4740-adc
+      - ingenic,jz4760-adc
+      - ingenic,jz4760b-adc
+      - ingenic,jz4770-adc
+
+  '#io-channel-cells':
+    const: 1
+    description:
+      Must be set to <1> to indicate channels are selected by index.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc
+
+  interrupts:
+    maxItems: 1
+
+  ingenic,use-internal-divider:
+    description:
+      If present, battery voltage is read from the VBAT_IR pin, which has an
+      internal 1/4 divider. If absent, it is read through the VBAT_ER pin,
+      which does not have such a divider.
+    type: boolean
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: ingenic,jz4760b-adc
+then:
+  properties:
+    ingenic,use-internal-divider: false
+
+required:
+  - compatible
+  - '#io-channel-cells'
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+    adc@10070000 {
+            compatible = "ingenic,jz4740-adc";
+            #io-channel-cells = <1>;
+
+            reg = <0x10070000 0x30>;
+
+            clocks = <&cgu JZ4740_CLK_ADC>;
+            clock-names = "adc";
+
+            interrupt-parent = <&intc>;
+            interrupts = <18>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 59009997dca0..5207c919abe0 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -7,9 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Linear Technology / Analog Devices LTC2496 ADC
 
 maintainers:
- - Lars-Peter Clausen <lars@metafoo.de>
- - Michael Hennerich <Michael.Hennerich@analog.com>
- - Stefan Popa <stefan.popa@analog.com>
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Stefan Popa <stefan.popa@analog.com>
 
 properties:
   compatible:
@@ -17,21 +17,21 @@ properties:
       - lltc,ltc2496
 
   vref-supply:
-    description: phandle to an external regulator providing the reference voltage
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    description: Power supply for the reference voltage
 
   reg:
-    description: spi chipselect number according to the usual spi bindings
-
-  spi-max-frequency:
-    description: maximal spi bus frequency supported
+    maxItems: 1
 
 required:
   - compatible
   - vref-supply
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
new file mode 100644
index 000000000000..875f394576c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology / Analog Devices LTC2497 ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  16bit ADC supporting up to 16 single ended or 8 differential inputs.
+  I2C interface.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2497
+      - lltc,ltc2499
+
+  reg: true
+  vref-supply: true
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@76 {
+            compatible = "lltc,ltc2497";
+            reg = <0x76>;
+            vref-supply = <&ltc2497_reg>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt
deleted file mode 100644
index 9ada5abd45fa..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-NXP LPC1850 ADC bindings
-
-Required properties:
-- compatible: Should be "nxp,lpc1850-adc"
-- reg: Offset and length of the register set for the ADC device
-- interrupts: The interrupt number for the ADC device
-- clocks: The root clock of the ADC controller
-- vref-supply: The regulator supply ADC reference voltage
-- resets: phandle to reset controller and line specifier
-
-Example:
-
-adc0: adc@400e3000 {
-	compatible = "nxp,lpc1850-adc";
-	reg = <0x400e3000 0x1000>;
-	interrupts = <17>;
-	clocks = <&ccu1 CLK_APB3_ADC0>;
-	vref-supply = <&reg_vdda>;
-	resets = <&rgu 40>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt
deleted file mode 100644
index 3a1bc669bd51..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* NXP LPC32xx SoC ADC controller
-
-Required properties:
-- compatible: must be "nxp,lpc3220-adc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: The ADC interrupt
-
-Optional:
- - vref-supply: The regulator supply ADC reference voltage, optional
-   for legacy reason, but highly encouraging to us in new device tree
-
-Example:
-
-	adc@40048000 {
-		compatible = "nxp,lpc3220-adc";
-		reg = <0x40048000 0x1000>;
-		interrupt-parent = <&mic>;
-		interrupts = <39 0>;
-		vref-supply = <&vcc>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/ltc2497.txt b/Documentation/devicetree/bindings/iio/adc/ltc2497.txt
deleted file mode 100644
index a237ed99c0d8..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ltc2497.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* Linear Technology / Analog Devices LTC2497 ADC
-
-Required properties:
- - compatible: Must be "lltc,ltc2497"
- - reg: Must contain the ADC I2C address
- - vref-supply: The regulator supply for ADC reference voltage
-
-Example:
-	ltc2497: adc@76 {
-		compatible = "lltc,ltc2497";
-		reg = <0x76>;
-		vref-supply = <&ltc2497_reg>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml b/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml
new file mode 100644
index 000000000000..b3b292fb1c59
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/marvell,berlin2-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Berlin 2 Analog to Digital Converter (ADC)
+
+maintainers:
+  - Antoine Tenart <antoine.tenart@free-electrons.com>
+
+description:
+  The Berlin ADC has 8 channels, with one connected to a temperature sensor.
+  It is part of the system controller register set. The ADC node should be a
+  sub-node of the system controller node.
+
+properties:
+  compatible:
+    const: marvell,berlin2-adc
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: adc
+      - const: tsen
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    sysctrl {
+        adc {
+            compatible = "marvell,berlin2-adc";
+            interrupt-parent = <&sic>;
+            interrupts = <12>, <14>;
+            interrupt-names = "adc", "tsen";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/max11100.txt b/Documentation/devicetree/bindings/iio/adc/max11100.txt
deleted file mode 100644
index b7f7177b8aca..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/max11100.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Maxim max11100 Analog to Digital Converter (ADC)
-
-Required properties:
-  - compatible: Should be "maxim,max11100"
-  - reg: the adc unit address
-  - vref-supply: phandle to the regulator that provides reference voltage
-
-Optional properties:
-  - spi-max-frequency: SPI maximum frequency
-
-Example:
-
-max11100: adc@0 {
-        compatible = "maxim,max11100";
-        reg = <0>;
-        vref-supply = <&adc0_vref>;
-        spi-max-frequency = <240000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/max1118.txt b/Documentation/devicetree/bindings/iio/adc/max1118.txt
deleted file mode 100644
index cf33d0b15a6d..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/max1118.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* MAX1117/MAX1118/MAX1119 8-bit, dual-channel ADCs
-
-Required properties:
- - compatible: Should be one of
-	* "maxim,max1117"
-	* "maxim,max1118"
-	* "maxim,max1119"
- - reg: spi chip select number for the device
- - (max1118 only) vref-supply: The regulator supply for ADC reference voltage
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "maxim,max1118";
-	reg = <0>;
-	vref-supply = <&vdd_supply>;
-	spi-max-frequency = <1000000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/max1363.txt b/Documentation/devicetree/bindings/iio/adc/max1363.txt
deleted file mode 100644
index 94a9011dd860..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/max1363.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-* Maxim 1x3x/136x/116xx Analog to Digital Converter (ADC)
-
-The node for this driver must be a child node of a I2C controller, hence
-all mandatory properties for your controller must be specified. See directory:
-
-        Documentation/devicetree/bindings/i2c
-
-for more details.
-
-Required properties:
-  - compatible: Should be one of
-		"maxim,max1361"
-		"maxim,max1362"
-		"maxim,max1363"
-		"maxim,max1364"
-		"maxim,max1036"
-		"maxim,max1037"
-		"maxim,max1038"
-		"maxim,max1039"
-		"maxim,max1136"
-		"maxim,max1137"
-		"maxim,max1138"
-		"maxim,max1139"
-		"maxim,max1236"
-		"maxim,max1237"
-		"maxim,max1238"
-		"maxim,max1239"
-		"maxim,max11600"
-		"maxim,max11601"
-		"maxim,max11602"
-		"maxim,max11603"
-		"maxim,max11604"
-		"maxim,max11605"
-		"maxim,max11606"
-		"maxim,max11607"
-		"maxim,max11608"
-		"maxim,max11609"
-		"maxim,max11610"
-		"maxim,max11611"
-		"maxim,max11612"
-		"maxim,max11613"
-		"maxim,max11614"
-		"maxim,max11615"
-		"maxim,max11616"
-		"maxim,max11617"
-		"maxim,max11644"
-		"maxim,max11645"
-		"maxim,max11646"
-		"maxim,max11647"
-  - reg: Should contain the ADC I2C address
-
-Optional properties:
-  - vcc-supply: phandle to the regulator that provides power to the ADC.
-  - vref-supply: phandle to the regulator for ADC reference voltage.
-  - interrupts: IRQ line for the ADC. If not used the driver will use
-    polling.
-
-Example:
-adc: max11644@36 {
-	compatible = "maxim,max11644";
-	reg = <0x36>;
-	vref-supply = <&adc_vref>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/max9611.txt b/Documentation/devicetree/bindings/iio/adc/max9611.txt
deleted file mode 100644
index ab4f43145ae5..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/max9611.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Maxim max9611/max9612 current sense amplifier with 12-bits ADC interface
-
-Maxim max9611/max9612 is an high-side current sense amplifier with integrated
-12-bits ADC communicating over I2c bus.
-The device node for this driver shall be a child of a I2c controller.
-
-Required properties
-  - compatible: Should be "maxim,max9611" or "maxim,max9612"
-  - reg: The 7-bits long I2c address of the device
-  - shunt-resistor-micro-ohms: Value, in micro Ohms, of the current sense shunt
-			        resistor
-
-Example:
-
-&i2c4 {
-	csa: adc@7c {
-		compatible = "maxim,max9611";
-		reg = <0x7c>;
-
-		shunt-resistor-micro-ohms = <5000>;
-	};
-};
-
-This device node describes a current sense amplifier sitting on I2c4 bus
-with address 0x7c (read address is 0xf9, write address is 0xf8).
-A sense resistor of 0,005 Ohm is installed between RS+ and RS- current-sensing
-inputs.
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
new file mode 100644
index 000000000000..d0a7ed26d9ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1027.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1027 and similar ADCs
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Philippe Reynes <tremyfr@yahoo.fr>
+
+description: |
+  300ks/s SPI ADCs with temperature sensors.
+
+properties:
+  compatible:
+    enum:
+        # 10-bit 8 channels
+      - maxim,max1027
+        # 10-bit 12 channels
+      - maxim,max1029
+        # 10-bit 16 channels
+      - maxim,max1031
+         # 12-bit 8 channels
+      - maxim,max1227
+         # 12-bit 12 channels
+      - maxim,max1229
+         # 12-bit 16 channels
+      - maxim,max1231
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+       #address-cells = <1>;
+       #size-cells = <0>;
+        maxadc: adc@0 {
+            compatible = "maxim,max1027";
+            reg = <0>;
+            #io-channel-cells = <1>;
+            interrupt-parent = <&gpio5>;
+            interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
new file mode 100644
index 000000000000..4f74cb33383a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max11100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX11100 ADC
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+    Single channel 16 bit ADC with SPI interface.
+
+properties:
+  compatible:
+    const: maxim,max11100
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: External reference, needed to establish input scaling.
+
+  spi-max-frequency:
+    minimum: 100000
+    maximum: 4800000
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max11100";
+            reg = <0>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <240000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
new file mode 100644
index 000000000000..bb336e33ebe2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1118.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1118 and similar ADCs
+
+maintainers:
+  - Akinobu Mita <akinobu.mita@gmail.com>
+
+description: |
+    Dual channel 8bit ADCs.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1117
+      - maxim,max1118
+      - maxim,max1119
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  vref-supply:
+    description: External reference, needed to establish input scaling
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max1118
+    then:
+      required:
+        - vref-supply
+    else:
+      properties:
+        vref-supply: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max1118";
+            reg = <0>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
new file mode 100644
index 000000000000..5f9e043cf5cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX11205 ADC
+
+maintainers:
+  - Ramona Bolboaca <ramona.bolboaca@analog.com>
+
+description: |
+  The MAX11205 is an ultra-low-power (< 300FA max active current),
+  high-resolution, serial-output ADC.
+
+  https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max11205a
+      - maxim,max11205b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  spi-cpha: true
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage. This is a differential
+      reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-max-frequency
+  - spi-cpha
+  - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "maxim,max11205a";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpha;
+            interrupt-parent = <&gpio>;
+            interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+            vref-supply = <&max11205_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
new file mode 100644
index 000000000000..50bcd72ac9d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1238.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1238 and similar ADCs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Family of simple ADCs with i2c inteface and internal references.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1036
+      - maxim,max1037
+      - maxim,max1038
+      - maxim,max1039
+      - maxim,max1136
+      - maxim,max1137
+      - maxim,max1138
+      - maxim,max1139
+      - maxim,max1236
+      - maxim,max1237
+      - maxim,max1238
+      - maxim,max1239
+      - maxim,max11600
+      - maxim,max11601
+      - maxim,max11602
+      - maxim,max11603
+      - maxim,max11604
+      - maxim,max11605
+      - maxim,max11606
+      - maxim,max11607
+      - maxim,max11608
+      - maxim,max11609
+      - maxim,max11610
+      - maxim,max11611
+      - maxim,max11612
+      - maxim,max11613
+      - maxim,max11614
+      - maxim,max11615
+      - maxim,max11616
+      - maxim,max11617
+      - maxim,max11644
+      - maxim,max11645
+      - maxim,max11646
+      - maxim,max11647
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+  vref-supply:
+    description: Optional external reference.  If not supplied, internal
+      reference will be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@36 {
+            compatible = "maxim,max1238";
+            reg = <0x36>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
new file mode 100644
index 000000000000..58b12fe8070c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Alexandru Lazar
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1241.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1241 12-bit, single-channel analog to digital converter
+
+maintainers:
+  - Alexandru Lazar <alazar@startmail.com>
+
+description: |
+  Bindings for the max1241 12-bit, single-channel ADC device. Datasheet
+  can be found at:
+    https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1241
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Device tree identifier of the regulator that powers the ADC.
+
+  vref-supply:
+    description:
+      Device tree identifier of the regulator that provides the external
+      reference voltage.
+
+  shutdown-gpios:
+    description:
+      GPIO spec for the GPIO pin connected to the ADC's /SHDN pin. If
+      specified, the /SHDN pin will be asserted between conversions,
+      thus enabling power-down mode.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max1241";
+            reg = <0>;
+            vdd-supply = <&adc_vdd>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <1000000>;
+            shutdown-gpios = <&gpio 26 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
new file mode 100644
index 000000000000..e04f09f35601
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1363.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1363 and similar ADCs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+   Family of ADCs with i2c inteface, internal references and threshold
+   monitoring.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1361
+      - maxim,max1362
+      - maxim,max1363
+      - maxim,max1364
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+  vref-supply:
+    description: Optional external reference.  If not supplied, internal
+      reference will be used.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@36 {
+            compatible = "maxim,max1363";
+            reg = <0x36>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml
new file mode 100644
index 000000000000..95774a55629d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max9611.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX9611 and similar current sense amplifiers with integrated ADCs
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+   These devices combine a high-side current sense amplifier with a 12 bit ADC.
+   They have an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max9611
+      - maxim,max9612
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description: |
+      Value in micro Ohms of the shunt resistor connected between the RS+ and
+      RS- inputs, across which the current is measured.  Value needed to compute
+      the scaling of the measured current.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - shunt-resistor-micro-ohms
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@7c {
+            compatible = "maxim,max9611";
+            reg = <0x7c>;
+            shunt-resistor-micro-ohms = <5000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
deleted file mode 100644
index 56373d643f76..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-* Microchip Analog to Digital Converter (ADC)
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in
-
-        Documentation/devicetree/bindings/spi/spi-bus.txt
-
-must be specified.
-
-Required properties:
-	- compatible:  	Must be one of the following, depending on the
-			model:
-				"mcp3001" (DEPRECATED)
-				"mcp3002" (DEPRECATED)
-				"mcp3004" (DEPRECATED)
-				"mcp3008" (DEPRECATED)
-				"mcp3201" (DEPRECATED)
-				"mcp3202" (DEPRECATED)
-				"mcp3204" (DEPRECATED)
-				"mcp3208" (DEPRECATED)
-				"mcp3301" (DEPRECATED)
-
-				"microchip,mcp3001"
-				"microchip,mcp3002"
-				"microchip,mcp3004"
-				"microchip,mcp3008"
-				"microchip,mcp3201"
-				"microchip,mcp3202"
-				"microchip,mcp3204"
-				"microchip,mcp3208"
-				"microchip,mcp3301"
-				"microchip,mcp3550-50"
-				"microchip,mcp3550-60"
-				"microchip,mcp3551"
-				"microchip,mcp3553"
-
-			NOTE: The use of the compatibles with no vendor prefix
-			is deprecated and only listed because old DT use them.
-
-	- spi-cpha, spi-cpol (boolean):
-			Either SPI mode (0,0) or (1,1) must be used, so specify
-			none or both of spi-cpha, spi-cpol.  The MCP3550/1/3
-			is more efficient in mode (1,1) as only 3 instead of
-			4 bytes need to be read from the ADC, but not all SPI
-			masters support it.
-
-	- vref-supply:	Phandle to the external reference voltage supply.
-
-Examples:
-spi_controller {
-	mcp3x0x@0 {
-		compatible = "microchip,mcp3002";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		vref-supply = <&vref_reg>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
deleted file mode 100644
index 82bcce07255d..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Microchip mcp3421/2/3/4/6/7/8 chip family (ADC)
-
-Required properties:
- - compatible: Should be
-	"microchip,mcp3421" or
-	"microchip,mcp3422" or
-	"microchip,mcp3423" or
-	"microchip,mcp3424" or
-	"microchip,mcp3425" or
-	"microchip,mcp3426" or
-	"microchip,mcp3427" or
-	"microchip,mcp3428"
- - reg: I2C address for the device
-
-Example:
-adc@0 {
-	compatible = "microchip,mcp3424";
-	reg = <0x68>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
new file mode 100644
index 000000000000..7f79a06e76f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/mediatek,mt2701-auxadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AUXADC - ADC on Mediatek mobile SoC (mt65xx/mt81xx/mt27xx)
+
+maintainers:
+  - Zhiyong Tao <zhiyong.tao@mediatek.com>
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description: |
+  The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found
+  in some Mediatek SoCs which among other things measures the temperatures
+  in the SoC. It can be used directly with register accesses, but it is also
+  used by thermal controller which reads the temperatures from the AUXADC
+  directly via its own bus interface. See mediatek-thermal bindings
+  for the Thermal Controller which holds a phandle to the AUXADC.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-auxadc
+          - mediatek,mt2712-auxadc
+          - mediatek,mt6765-auxadc
+          - mediatek,mt7622-auxadc
+          - mediatek,mt8173-auxadc
+      - items:
+          - enum:
+              - mediatek,mt7623-auxadc
+          - const: mediatek,mt2701-auxadc
+      - items:
+          - enum:
+              - mediatek,mt8183-auxadc
+              - mediatek,mt8186-auxadc
+              - mediatek,mt8188-auxadc
+              - mediatek,mt8195-auxadc
+              - mediatek,mt8516-auxadc
+          - const: mediatek,mt8173-auxadc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: main
+
+  "#io-channel-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#io-channel-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        adc@11001000 {
+            compatible = "mediatek,mt8183-auxadc",
+                         "mediatek,mt8173-auxadc";
+            reg = <0 0x11001000 0 0x1000>;
+            clocks = <&infracfg CLK_INFRA_AUXADC>;
+            clock-names = "main";
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt6360-adc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt6360-adc.yaml
new file mode 100644
index 000000000000..db4e3613c104
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt6360-adc.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/mediatek,mt6360-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6360 and similar ADCs
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt6360-adc
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+      compatible = "mediatek,mt6360-adc";
+      #io-channel-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
new file mode 100644
index 000000000000..18108f0f3731
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3201.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip mcp3201 and similar ADCs
+
+maintainers:
+  - Oskar Andero <oskar.andero@gmail.com>
+
+description: |
+   Family of simple ADCs with a SPI interface.
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3001
+      - microchip,mcp3002
+      - microchip,mcp3004
+      - microchip,mcp3008
+      - microchip,mcp3201
+      - microchip,mcp3202
+      - microchip,mcp3204
+      - microchip,mcp3208
+      - microchip,mcp3301
+      - microchip,mcp3550-50
+      - microchip,mcp3550-60
+      - microchip,mcp3551
+      - microchip,mcp3553
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+  spi-cpol: true
+
+  vref-supply:
+    description: External reference.
+
+  "#io-channel-cells":
+    const: 1
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "microchip,mcp3002";
+            reg = <0>;
+            vref-supply = <&vref_reg>;
+            spi-cpha;
+            spi-cpol;
+            #io-channel-cells = <1>;
+        };
+        adc@1 {
+            compatible = "microchip,mcp3002";
+            reg = <1>;
+            vref-supply = <&vref_reg>;
+            spi-max-frequency = <1500000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 0ce290473fb0..2c93fb41f172 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -36,12 +36,18 @@ properties:
     description: IRQ line of the ADC
     maxItems: 1
 
+  microchip,data-ready-hiz:
+    description:
+      Data Ready Pin Inactive State Control
+      true = The DR pin state is high-impedance
+      false = The DR pin state is logic high
+    type: boolean
+
   microchip,device-addr:
     description: Device address when multiple MCP3911 chips are present on the same SPI bus.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-      - default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
 
   vref-supply:
     description: |
@@ -52,6 +58,11 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
new file mode 100644
index 000000000000..a6cb857a232d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/motorola,cpcap-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC ADC binding
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC
+  has ADCs that are used for battery charging and USB PHY VBUS and ID pin
+  detection.
+
+properties:
+  compatible:
+    enum:
+      - motorola,cpcap-adc
+      - motorola,mapphone-cpcap-adc
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: adcdone
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc {
+            compatible = "motorola,mapphone-cpcap-adc";
+            interrupt-parent = <&cpcap>;
+            interrupts = <8 IRQ_TYPE_NONE>;
+            interrupt-names = "adcdone";
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt
deleted file mode 100644
index 78c06e05c8e5..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Mediatek AUXADC - Analog to Digital Converter on Mediatek mobile soc (mt65xx/mt81xx/mt27xx)
-===============
-
-The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found
-in some Mediatek SoCs which among other things measures the temperatures
-in the SoC. It can be used directly with register accesses, but it is also
-used by thermal controller which reads the temperatures from the AUXADC
-directly via its own bus interface. See
-Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
-for the Thermal Controller which holds a phandle to the AUXADC.
-
-Required properties:
-  - compatible: Should be one of:
-    - "mediatek,mt2701-auxadc": For MT2701 family of SoCs
-    - "mediatek,mt2712-auxadc": For MT2712 family of SoCs
-    - "mediatek,mt6765-auxadc": For MT6765 family of SoCs
-    - "mediatek,mt7622-auxadc": For MT7622 family of SoCs
-    - "mediatek,mt8173-auxadc": For MT8173 family of SoCs
-    - "mediatek,mt8183-auxadc", "mediatek,mt8173-auxadc": For MT8183 family of SoCs
-  - reg: Address range of the AUXADC unit.
-  - clocks: Should contain a clock specifier for each entry in clock-names
-  - clock-names: Should contain "main".
-  - #io-channel-cells: Should be 1, see ../iio-bindings.txt
-
-Example:
-
-auxadc: adc@11001000 {
-	compatible = "mediatek,mt2701-auxadc";
-	reg = <0 0x11001000 0 0x1000>;
-	clocks = <&pericfg CLK_PERI_AUXADC>;
-	clock-names = "main";
-	#io-channel-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml
new file mode 100644
index 000000000000..04566ff02eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nuvoton,nau7802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NAU7802 I2c Analog to Digital Converter (ADC)
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: nuvoton,nau7802
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nuvoton,vldo:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Internal reference voltage in millivolts to be configured.
+    minimum: 2400
+    maximum: 4500
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        nau7802@2a {
+            compatible = "nuvoton,nau7802";
+            reg = <0x2a>;
+            nuvoton,vldo = <3000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
deleted file mode 100644
index eb939fe77836..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Nuvoton NPCM Analog to Digital Converter (ADC)
-
-The NPCM ADC is a 10-bit converter for eight channel inputs.
-
-Required properties:
-- compatible: "nuvoton,npcm750-adc" for the NPCM7XX BMC.
-- reg: specifies physical base address and size of the registers.
-- interrupts: Contain the ADC interrupt with flags for falling edge.
-
-Optional properties:
-- clocks: phandle of ADC reference clock, in case the clock is not
-		  added the ADC will use the default ADC sample rate.
-- vref-supply: The regulator supply ADC reference voltage, in case the
-			   vref-supply is not added the ADC will use internal voltage
-			   reference.
-
-Example:
-
-adc: adc@f000c000 {
-	compatible = "nuvoton,npcm750-adc";
-	reg = <0xf000c000 0x8>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clk NPCM7XX_CLK_ADC>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
new file mode 100644
index 000000000000..fede2aa64092
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nuvoton,npcm750-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM BMC Analog to Digital Converter (ADC)
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description:
+  The NPCM7XX ADC is a 10-bit converter and NPCM8XX ADC is a 12-bit converter,
+  both have eight channel inputs.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-adc
+      - nuvoton,npcm845-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: ADC interrupt, should be set for falling edge.
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: If not provided the defulat ADC sample rate will be used.
+
+  vref-supply:
+    description: If not supplied, the internal voltage reference will be used.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@f000c000 {
+            compatible = "nuvoton,npcm750-adc";
+            reg = <0xf000c000 0x8>;
+            interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk NPCM7XX_CLK_ADC>;
+            resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt
deleted file mode 100644
index e9582e6fe350..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Nuvoton NAU7802 Analog to Digital Converter (ADC)
-
-Required properties:
-  - compatible: Should be "nuvoton,nau7802"
-  - reg: Should contain the ADC I2C address
-
-Optional properties:
-  - nuvoton,vldo: Internal reference voltage in millivolts to be
-    configured valid values are between 2400 mV and 4500 mV.
-  - interrupts: IRQ line for the ADC. If not used the driver will use
-    polling.
-
-Example:
-adc2: nau7802@2a {
-	compatible = "nuvoton,nau7802";
-	reg = <0x2a>;
-	nuvoton,vldo = <3000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml
new file mode 100644
index 000000000000..9c59a20a6032
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nxp,imx8qxp-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP IMX8QXP ADC bindings
+
+maintainers:
+  - Cai Huoqing <caihuoqing@baidu.com>
+
+description:
+  Supports the ADC found on the IMX8QXP SoC.
+
+properties:
+  compatible:
+    const: nxp,imx8qxp-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: per
+      - const: ipg
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-rates
+  - power-domains
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        adc@5a880000 {
+            compatible = "nxp,imx8qxp-adc";
+            reg = <0x0 0x5a880000 0x0 0x10000>;
+            interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk IMX_SC_R_ADC_0>,
+                     <&clk IMX_SC_R_ADC_0>;
+            clock-names = "per", "ipg";
+            assigned-clocks = <&clk IMX_SC_R_ADC_0>;
+            assigned-clock-rates = <24000000>;
+            power-domains = <&pd IMX_SC_R_ADC_0>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
new file mode 100644
index 000000000000..43abb300fa3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nxp,lpc1850-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1850 ADC bindings
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Supports the ADC found on the LPC1850 SoC.
+
+properties:
+  compatible:
+    const: nxp,lpc1850-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vref-supply: true
+
+  resets:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - vref-supply
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc18xx-ccu.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@400e3000 {
+            compatible = "nxp,lpc1850-adc";
+            reg = <0x400e3000 0x1000>;
+            interrupts = <17>;
+            clocks = <&ccu1 CLK_APB3_ADC0>;
+            vref-supply = <&reg_vdda>;
+            resets = <&rgu 40>;
+         };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml
new file mode 100644
index 000000000000..2c5032be83bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nxp,lpc3220-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC3220 SoC ADC controller
+
+maintainers:
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+description:
+  This hardware block has been used on several LPC32XX SoCs.
+
+properties:
+  compatible:
+    const: nxp,lpc3220-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@40048000 {
+            compatible = "nxp,lpc3220-adc";
+            reg = <0x40048000 0x1000>;
+            interrupt-parent = <&mic>;
+            interrupts = <39 0>;
+            vref-supply = <&vcc>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt b/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt
deleted file mode 100644
index 4bb9a86065d1..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Palmas general purpose ADC IP block devicetree bindings
-
-Channels list:
-	0 battery type
-	1 battery temp NTC (optional current source)
-	2 GP
-	3 temp (with ext. diode, optional current source)
-	4 GP
-	5 GP
-	6 VBAT_SENSE
-	7 VCC_SENSE
-	8 Backup Battery voltage
-	9 external charger (VCHG)
-	10 VBUS
-	11 DC-DC current probe (how does this work?)
-	12 internal die temp
-	13 internal die temp
-	14 USB ID pin voltage
-	15 test network
-
-Required properties:
-- compatible : Must be "ti,palmas-gpadc".
-- #io-channel-cells: Should be set to <1>.
-
-Optional sub-nodes:
-ti,channel0-current-microamp: Channel 0 current in uA.
-	Values are rounded to derive 0uA, 5uA, 15uA, 20uA.
-ti,channel3-current-microamp: Channel 3 current in uA.
-	Values are rounded to derive 0uA, 10uA, 400uA, 800uA.
-ti,enable-extended-delay: Enable extended delay.
-
-Example:
-
-pmic {
-	compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
-	...
-	gpadc {
-		compatible = "ti,palmas-gpadc";
-		interrupts = <18 0
-			      16 0
-			      17 0>;
-		#io-channel-cells = <1>;
-		ti,channel0-current-microamp = <5>;
-		ti,channel3-current-microamp = <10>;
-		};
-	};
-	...
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
new file mode 100644
index 000000000000..d186b713d6a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,pm8018-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's PM8xxx voltage XOADC
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal
+  oscillator ADC) encompassing PM8018, PM8038, PM8058 and PM8921.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8018-adc
+      - qcom,pm8038-adc
+      - qcom,pm8058-adc
+      - qcom,pm8921-adc
+
+  reg:
+    maxItems: 1
+    description:
+      ADC base address in the PMIC, typically 0x197.
+
+  xoadc-ref-supply:
+    description:
+      The reference voltage may vary with PMIC variant but is typically
+      something like 2.2 or 1.8V.
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+    description:
+      The first cell is the prescaler (on PM8058) or premux (on PM8921)
+      with two valid bits  so legal values are 0x00, 0x01 or 0x02.
+      The second cell is the main analog mux setting (0x00..0x0f).
+      The combination of prescaler/premux and analog mux uniquely addresses
+      a hardware channel on all systems.
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 2
+    description:
+      The cells are precaler or premux followed by the analog muxing line.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+  - "#address-cells"
+  - "#size-cells"
+  - adc-channel@c
+  - adc-channel@d
+  - adc-channel@f
+
+patternProperties:
+  "^(adc-channel@)[0-9a-f]$":
+    type: object
+    description: |
+      ADC channel specific configuration.
+      Note that channels c, d and f must be present for calibration.
+      These three nodes are used for absolute and ratiometric calibration
+      and only need to have these reg values: they are by hardware definition
+      1:1 ratio converters that sample 625, 1250 and 0 milliV and create
+      an interpolation calibration for all other ADCs.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      qcom,decimation:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          This parameter is used to decrease the ADC sampling rate.
+          Quicker measurements can be made by reducing the decimation ratio.
+          Valid values are 512, 1024, 2048, 4096.
+          If the property is not found, a default value of 512 will be used.
+
+      qcom,ratiometric:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Channel calibration type. If this property is specified
+          VADC will use a special voltage references for channel
+          calibration. The available references are specified in the
+          as a u32 value setting (see below) and it is compulsory
+          to also specify this reference if ratiometric calibration
+          is selected.
+
+          If the property is not found, the channel will be
+          calibrated with the 0.625V and 1.25V reference channels, also
+          known as an absolute calibration.
+
+          The reference voltage pairs when using ratiometric calibration:
+          0 = XO_IN/XOADC_GND
+          1 = PMIC_IN/XOADC_GND
+          2 = PMIC_IN/BMS_CSP
+          3 (invalid)
+          4 = XOADC_GND/XOADC_GND
+          5 = XOADC_VREF/XOADC_GND
+
+    additionalProperties: false
+
+    required:
+      - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@197 {
+            compatible = "qcom,pm8058-adc";
+            reg = <0x197>;
+            interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+            #address-cells = <2>;
+            #size-cells = <0>;
+            #io-channel-cells = <2>;
+
+            vcoin: adc-channel@0 {
+                reg = <0x00 0x00>;
+            };
+            vbat: adc-channel@1 {
+                reg = <0x00 0x01>;
+            };
+            dcin: adc-channel@2 {
+                reg = <0x00 0x02>;
+            };
+            ichg: adc-channel@3 {
+                reg = <0x00 0x03>;
+            };
+            vph_pwr: adc-channel@4 {
+                reg = <0x00 0x04>;
+            };
+            usb_vbus: adc-channel@a {
+                reg = <0x00 0x0a>;
+            };
+            die_temp: adc-channel@b {
+                reg = <0x00 0x0b>;
+            };
+            ref_625mv: adc-channel@c {
+                reg = <0x00 0x0c>;
+            };
+            ref_1250mv: adc-channel@d {
+                reg = <0x00 0x0d>;
+            };
+            ref_325mv: adc-channel@e {
+                reg = <0x00 0x0e>;
+            };
+            ref_muxoff: adc-channel@f {
+                reg = <0x00 0x0f>;
+           };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt
deleted file mode 100644
index 3ae06127789e..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt
+++ /dev/null
@@ -1,157 +0,0 @@
-Qualcomm's PM8xxx voltage XOADC
-
-The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal
-oscillator ADC) encompassing PM8018, PM8038, PM8058 and PM8921.
-
-Required properties:
-
-- compatible: should be one of:
-  "qcom,pm8018-adc"
-  "qcom,pm8038-adc"
-  "qcom,pm8058-adc"
-  "qcom,pm8921-adc"
-
-- reg: should contain the ADC base address in the PMIC, typically
-  0x197.
-
-- xoadc-ref-supply: should reference a regulator that can supply
-  a reference voltage on demand. The reference voltage may vary
-  with PMIC variant but is typically something like 2.2 or 1.8V.
-
-The following required properties are standard for IO channels, see
-iio-bindings.txt for more details, but notice that this particular
-ADC has a special addressing scheme that require two cells for
-identifying each ADC channel:
-
-- #address-cells: should be set to <2>, the first cell is the
-  prescaler (on PM8058) or premux (on PM8921) with two valid bits
-  so legal values are 0x00, 0x01 or 0x02. The second cell
-  is the main analog mux setting (0x00..0x0f). The combination
-  of prescaler/premux and analog mux uniquely addresses a hardware
-  channel on all systems.
-
-- #size-cells: should be set to <0>
-
-- #io-channel-cells: should be set to <2>, again the cells are
-  precaler or premux followed by the analog muxing line.
-
-- interrupts: should refer to the parent PMIC interrupt controller
-  and reference the proper ADC interrupt.
-
-Required subnodes:
-
-The ADC channels are configured as subnodes of the ADC.
-
-Since some of them are used for calibrating the ADC, these nodes are
-compulsory:
-
-adc-channel@c {
-	reg = <0x00 0x0c>;
-};
-
-adc-channel@d {
-	reg = <0x00 0x0d>;
-};
-
-adc-channel@f {
-	reg = <0x00 0x0f>;
-};
-
-These three nodes are used for absolute and ratiometric calibration
-and only need to have these reg values: they are by hardware definition
-1:1 ratio converters that sample 625, 1250 and 0 milliV and create
-an interpolation calibration for all other ADCs.
-
-Optional subnodes: any channels other than channels [0x00 0x0c],
-[0x00 0x0d] and [0x00 0x0f] are optional.
-
-Required channel node properties:
-
-- reg: should contain the hardware channel number in the range
-  0 .. 0xff (8 bits).
-
-Optional channel node properties:
-
-- qcom,decimation:
-  Value type: <u32>
-  Definition: This parameter is used to decrease the ADC sampling rate.
-          Quicker measurements can be made by reducing the decimation ratio.
-          Valid values are 512, 1024, 2048, 4096.
-          If the property is not found, a default value of 512 will be used.
-
-- qcom,ratiometric:
-  Value type: <u32>
-  Definition: Channel calibration type. If this property is specified
-          VADC will use a special voltage references for channel
-          calibration. The available references are specified in the
-	  as a u32 value setting (see below) and it is compulsory
-	  to also specify this reference if ratiometric calibration
-	  is selected.
-
-	  If the property is not found, the channel will be
-          calibrated with the 0.625V and 1.25V reference channels, also
-          known as an absolute calibration.
-  The reference voltage pairs when using ratiometric calibration:
-	  0 = XO_IN/XOADC_GND
-	  1 = PMIC_IN/XOADC_GND
-	  2 = PMIC_IN/BMS_CSP
-	  3 (invalid)
-	  4 = XOADC_GND/XOADC_GND
-	  5 = XOADC_VREF/XOADC_GND
-
-Example:
-
-xoadc: xoadc@197 {
-	compatible = "qcom,pm8058-adc";
-	reg = <0x197>;
-	interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
-	#address-cells = <2>;
-	#size-cells = <0>;
-	#io-channel-cells = <2>;
-
-	vcoin: adc-channel@0 {
-		reg = <0x00 0x00>;
-	};
-	vbat: adc-channel@1 {
-		reg = <0x00 0x01>;
-	};
-	dcin: adc-channel@2 {
-		reg = <0x00 0x02>;
-	};
-	ichg: adc-channel@3 {
-		reg = <0x00 0x03>;
-	};
-	vph_pwr: adc-channel@4 {
-		reg = <0x00 0x04>;
-	};
-	usb_vbus: adc-channel@a {
-		reg = <0x00 0x0a>;
-	};
-	die_temp: adc-channel@b {
-		reg = <0x00 0x0b>;
-	};
-	ref_625mv: adc-channel@c {
-		reg = <0x00 0x0c>;
-	};
-	ref_1250mv: adc-channel@d {
-		reg = <0x00 0x0d>;
-	};
-	ref_325mv: adc-channel@e {
-		reg = <0x00 0x0e>;
-	};
-	ref_muxoff: adc-channel@f {
-		reg = <0x00 0x0f>;
-	};
-};
-
-/* IIO client node */
-iio-hwmon {
-	compatible = "iio-hwmon";
-	io-channels = <&xoadc 0x00 0x01>, /* Battery */
-		    <&xoadc 0x00 0x02>, /* DC in (charger) */
-		    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-		    <&xoadc 0x00 0x0b>, /* Die temperature */
-		    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-		    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-		    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt
deleted file mode 100644
index 4e36d6e2f7b6..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Qualcomm's SPMI PMIC current ADC
-
-QPNP PMIC current ADC (IADC) provides interface to clients to read current.
-A 16 bit ADC is used for current measurements. IADC can measure the current
-through an external resistor (channel 1) or internal (built-in) resistor
-(channel 0). When using an external resistor it is to be described by
-qcom,external-resistor-micro-ohms property.
-
-IADC node:
-
-- compatible:
-    Usage: required
-    Value type: <string>
-    Definition: Should contain "qcom,spmi-iadc".
-
-- reg:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: IADC base address and length in the SPMI PMIC register map
-
-- interrupts:
-    Usage: optional
-    Value type: <prop-encoded-array>
-    Definition: End of ADC conversion.
-
-- qcom,external-resistor-micro-ohms:
-    Usage: optional
-    Value type: <u32>
-    Definition: Sense resister value in micro Ohm.
-                If not defined value of 10000 micro Ohms will be used.
-
-Example:
-	/* IADC node */
-	pmic_iadc: iadc@3600 {
-		compatible = "qcom,spmi-iadc";
-		reg = <0x3600 0x100>;
-		interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
-		qcom,external-resistor-micro-ohms = <10000>;
-		#io-channel-cells  = <1>;
-	};
-
-	/* IIO client node */
-	bat {
-		io-channels = <&pmic_iadc  0>;
-		io-channel-names = "iadc";
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
new file mode 100644
index 000000000000..2a94db688830
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-iadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC current ADC
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  QPNP PMIC current ADC (IADC) provides interface to clients to read current.
+  A 16 bit ADC is used for current measurements. IADC can measure the current
+  through an external resistor (channel 1) or internal (built-in) resistor
+  (channel 0). When using an external resistor it is to be described by
+  qcom,external-resistor-micro-ohms property.
+
+properties:
+  compatible:
+    const: qcom,spmi-iadc
+
+  reg:
+    description: IADC base address and length in the SPMI PMIC register map
+    maxItems: 1
+
+  qcom,external-resistor-micro-ohms:
+    description:
+      Sensor resistor value. If not defined value of 10000 micro Ohms
+      will be used.
+
+  interrupts:
+    maxItems: 1
+    description:
+      End of conversion interrupt.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spmi_bus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic_iadc: adc@3600 {
+            compatible = "qcom,spmi-iadc";
+            reg = <0x3600>;
+            interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+            qcom,external-resistor-micro-ohms = <10000>;
+            #io-channel-cells  = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
new file mode 100644
index 000000000000..c8cbfd3444be
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-rradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC Round Robin ADC
+
+maintainers:
+  - Caleb Connolly <caleb.connolly@linaro.org>
+
+description: |
+  The Qualcomm SPMI Round Robin ADC (RRADC) provides interface to clients to
+  read the voltage, current and temperature for supported peripherals such as
+  the battery thermistor die temperature, charger temperature, USB and DC input
+  voltage / current and battery ID resistor.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pmi8998-rradc
+      - qcom,pm660-rradc
+
+  reg:
+    maxItems: 1
+
+  qcom,batt-id-delay-ms:
+    description: Sets the hardware settling time for the battery ID resistor.
+    enum: [0, 1, 4, 12, 20, 40, 60, 80]
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic_rradc: adc@4500 {
+          compatible = "qcom,pmi8998-rradc";
+          reg = <0x4500>;
+          #io-channel-cells  = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
deleted file mode 100644
index c8787688122a..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
+++ /dev/null
@@ -1,173 +0,0 @@
-Qualcomm's SPMI PMIC ADC
-
-- SPMI PMIC voltage ADC (VADC) provides interface to clients to read
-  voltage. The VADC is a 15-bit sigma-delta ADC.
-- SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
-  voltage. The VADC is a 16-bit sigma-delta ADC.
-
-VADC node:
-
-- compatible:
-    Usage: required
-    Value type: <string>
-    Definition: Should contain "qcom,spmi-vadc".
-                Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
-                Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
-                Should contain "qcom,pms405-adc" for PMS405 PMIC
-
-- reg:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: VADC base address in the SPMI PMIC register map.
-
-- #address-cells:
-    Usage: required
-    Value type: <u32>
-    Definition: Must be one. Child node 'reg' property should define ADC
-            channel number.
-
-- #size-cells:
-    Usage: required
-    Value type: <u32>
-    Definition: Must be zero.
-
-- #io-channel-cells:
-    Usage: required
-    Value type: <u32>
-    Definition: Must be one. For details about IIO bindings see:
-            Documentation/devicetree/bindings/iio/iio-bindings.txt
-
-- interrupts:
-    Usage: optional
-    Value type: <prop-encoded-array>
-    Definition: End of conversion interrupt.
-
-Channel node properties:
-
-- reg:
-    Usage: required
-    Value type: <u32>
-    Definition: ADC channel number.
-            See include/dt-bindings/iio/qcom,spmi-vadc.h
-
-- label:
-    Usage: required for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2"
-    Value type: <empty>
-    Definition: ADC input of the platform as seen in the schematics.
-            For thermistor inputs connected to generic AMUX or GPIO inputs
-            these can vary across platform for the same pins. Hence select
-            the platform schematics name for this channel.
-
-- qcom,decimation:
-    Usage: optional
-    Value type: <u32>
-    Definition: This parameter is used to decrease ADC sampling rate.
-            Quicker measurements can be made by reducing decimation ratio.
-            - For compatible property "qcom,spmi-vadc", valid values are
-              512, 1024, 2048, 4096. If property is not found, default value
-              of 512 will be used.
-            - For compatible property "qcom,spmi-adc5", valid values are 250, 420
-              and 840. If property is not found, default value of 840 is used.
-            - For compatible property "qcom,spmi-adc-rev2", valid values are 256,
-              512 and 1024. If property is not present, default value is 1024.
-
-- qcom,pre-scaling:
-    Usage: optional
-    Value type: <u32 array>
-    Definition: Used for scaling the channel input signal before the signal is
-            fed to VADC. The configuration for this node is to know the
-            pre-determined ratio and use it for post scaling. Select one from
-            the following options.
-            <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10>
-            If property is not found default value depending on chip will be used.
-
-- qcom,ratiometric:
-    Usage: optional
-    Value type: <empty>
-    Definition: Channel calibration type.
-            - For compatible property "qcom,spmi-vadc", if this property is
-              specified VADC will use the VDD reference (1.8V) and GND for
-              channel calibration. If property is not found, channel will be
-              calibrated with 0.625V and 1.25V reference channels, also
-              known as absolute calibration.
-            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
-              if this property is specified VADC will use the VDD reference
-              (1.875V) and GND for channel calibration. If property is not found,
-              channel will be calibrated with 0V and 1.25V reference channels,
-              also known as absolute calibration.
-
-- qcom,hw-settle-time:
-    Usage: optional
-    Value type: <u32>
-    Definition: Time between AMUX getting configured and the ADC starting
-            conversion. The 'hw_settle_time' is an index used from valid values
-            and programmed in hardware to achieve the hardware settling delay.
-            - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2",
-              Delay = 100us * (hw_settle_time) for hw_settle_time < 11,
-              and 2ms * (hw_settle_time - 10) otherwise.
-              Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
-              900 us and 1, 2, 4, 6, 8, 10 ms.
-              If property is not found, channel will use 0us.
-            - For compatible property "qcom,spmi-adc5", delay = 15us for
-              value 0, 100us * (value) for values < 11,
-              and 2ms * (value - 10) otherwise.
-              Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800,
-              900 us and 1, 2, 4, 6, 8, 10 ms
-              Certain controller digital versions have valid values of
-              15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms
-              If property is not found, channel will use 15us.
-
-- qcom,avg-samples:
-    Usage: optional
-    Value type: <u32>
-    Definition: Number of samples to be used for measurement.
-            Averaging provides the option to obtain a single measurement
-            from the ADC that is an average of multiple samples. The value
-            selected is 2^(value).
-            - For compatible property "qcom,spmi-vadc", valid values
-              are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
-              If property is not found, 1 sample will be used.
-            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
-              valid values are: 1, 2, 4, 8, 16
-              If property is not found, 1 sample will be used.
-
-NOTE:
-
-For compatible property "qcom,spmi-vadc" following channels, also known as
-reference point channels, are used for result calibration and their channel
-configuration nodes should be defined:
-VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
-VADC_GND_REF and VADC_VDD_VADC.
-
-Example:
-
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <linux/irq.h>
-/* ... */
-
-	/* VADC node */
-	pmic_vadc: vadc@3100 {
-		compatible = "qcom,spmi-vadc";
-		reg = <0x3100>;
-		interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-
-		/* Channel node */
-		adc-chan@VADC_LR_MUX10_USB_ID {
-			reg = <VADC_LR_MUX10_USB_ID>;
-			qcom,decimation = <512>;
-			qcom,ratiometric;
-			qcom,hw-settle-time = <200>;
-			qcom,avg-samples = <1>;
-			qcom,pre-scaling = <1 3>;
-		};
-	};
-
-	/* IIO client node */
-	usb {
-		io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>;
-		io-channel-names = "vadc";
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
new file mode 100644
index 000000000000..8bac0c4120dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -0,0 +1,279 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC ADC
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  SPMI PMIC voltage ADC (VADC) provides interface to clients to read
+  voltage. The VADC is a 15-bit sigma-delta ADC.
+  SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read
+  voltage. The VADC is a 16-bit sigma-delta ADC.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qcom,pms405-adc
+          - const: qcom,spmi-adc-rev2
+
+      - items:
+          - enum:
+              - qcom,spmi-vadc
+              - qcom,spmi-adc5
+              - qcom,spmi-adc-rev2
+              - qcom,spmi-adc7
+
+  reg:
+    description: VADC base address in the SPMI PMIC register map
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#io-channel-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      End of conversion interrupt.
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - '#io-channel-cells'
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    description: |
+      Represents the external channels which are connected to the ADC.
+      For compatible property "qcom,spmi-vadc" following channels, also known as
+      reference point channels, are used for result calibration and their channel
+      configuration nodes should be defined:
+      VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
+      VADC_GND_REF and VADC_VDD_VADC.
+
+    properties:
+      reg:
+        maxItems: 1
+        description: |
+          ADC channel number.
+          See include/dt-bindings/iio/qcom,spmi-vadc.h
+          For PMIC7 ADC, the channel numbers are specified separately per PMIC
+          in the PMIC-specific files in include/dt-bindings/iio/.
+
+      label:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: |
+            ADC input of the platform as seen in the schematics.
+            For thermistor inputs connected to generic AMUX or GPIO inputs
+            these can vary across platform for the same pins. Hence select
+            the platform schematics name for this channel.
+
+      qcom,decimation:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            This parameter is used to decrease ADC sampling rate.
+            Quicker measurements can be made by reducing decimation ratio.
+
+      qcom,pre-scaling:
+        description: |
+            Used for scaling the channel input signal before the signal is
+            fed to VADC. The configuration for this node is to know the
+            pre-determined ratio and use it for post scaling. It is a pair of
+            integers, denoting the numerator and denominator of the fraction by which
+            input signal is multiplied. For example, <1 3> indicates the signal is scaled
+            down to 1/3 of its value before ADC measurement.
+            If property is not found default value depending on chip will be used.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        oneOf:
+          - items:
+              - const: 1
+              - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+          - items:
+              - const: 10
+              - const: 81
+
+      qcom,ratiometric:
+        description: |
+            Channel calibration type.
+            - For compatible property "qcom,spmi-vadc", if this property is
+              specified VADC will use the VDD reference (1.8V) and GND for
+              channel calibration. If property is not found, channel will be
+              calibrated with 0.625V and 1.25V reference channels, also
+              known as absolute calibration.
+            - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and
+              "qcom,spmi-adc-rev2", if this property is specified VADC will use
+              the VDD reference (1.875V) and GND for channel calibration. If
+              property is not found, channel will be calibrated with 0V and 1.25V
+              reference channels, also known as absolute calibration.
+        type: boolean
+
+      qcom,hw-settle-time:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            Time between AMUX getting configured and the ADC starting
+            conversion. The 'hw_settle_time' is an index used from valid values
+            and programmed in hardware to achieve the hardware settling delay.
+
+      qcom,avg-samples:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            Number of samples to be used for measurement.
+            Averaging provides the option to obtain a single measurement
+            from the ADC that is an average of multiple samples. The value
+            selected is 2^(value).
+
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-vadc
+
+    then:
+      patternProperties:
+        "^.*@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 512, 1024, 2048, 4096 ]
+              default: 512
+
+            qcom,hw-settle-time:
+              enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
+                      4, 6, 8, 10 ]
+              default: 0
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 ]
+              default: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-rev2
+
+    then:
+      patternProperties:
+        "^.*@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 256, 512, 1024 ]
+              default: 1024
+
+            qcom,hw-settle-time:
+              enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
+                      4, 6, 8, 10 ]
+              default: 0
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16 ]
+              default: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc5
+
+    then:
+      patternProperties:
+        "^.*@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 250, 420, 840 ]
+              default: 840
+
+            qcom,hw-settle-time:
+              enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
+                      4, 6, 8, 10, 16, 32, 64, 128 ]
+              default: 15
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16 ]
+              default: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc7
+
+    then:
+      patternProperties:
+        "^.*@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 85, 340, 1360 ]
+              default: 1360
+
+            qcom,hw-settle-time:
+              enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000,
+                      8000, 16000, 32000, 64000, 128000 ]
+              default: 15
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16 ]
+              default: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    spmi_bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      /* VADC node */
+      pmic_vadc: adc@3100 {
+        compatible = "qcom,spmi-vadc";
+        reg = <0x3100>;
+        interrupts = <0x0 0x31 0x0 0x1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #io-channel-cells = <1>;
+
+        /* Channel node */
+        adc-chan@39 {
+          reg = <0x39>;
+          qcom,decimation = <512>;
+          qcom,ratiometric;
+          qcom,hw-settle-time = <200>;
+          qcom,avg-samples = <1>;
+          qcom,pre-scaling = <1 3>;
+        };
+
+        adc-chan@9 {
+          reg = <0x9>;
+        };
+
+        adc-chan@a {
+          reg = <0xa>;
+        };
+
+        adc-chan@e {
+          reg = <0xe>;
+        };
+
+        adc-chan@f {
+          reg = <0xf>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt b/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt
deleted file mode 100644
index df5b9f2ad8d8..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-* Renesas R-Car GyroADC device driver
-
-The GyroADC block is a reduced SPI block with up to 8 chipselect lines,
-which supports the SPI protocol of a selected few SPI ADCs. The SPI ADCs
-are sampled by the GyroADC block in a round-robin fashion and the result
-presented in the GyroADC registers.
-
-Required properties:
-- compatible:	Should be "<soc-specific>", "renesas,rcar-gyroadc".
-                The <soc-specific> should be one of:
-		renesas,r8a7791-gyroadc - for the GyroADC block present
-					  in r8a7791 SoC
-		renesas,r8a7792-gyroadc - for the GyroADC with interrupt
-					  block present in r8a7792 SoC
-- reg:		Address and length of the register set for the device
-- clocks:	References to all the clocks specified in the clock-names
-		property as specified in
-		Documentation/devicetree/bindings/clock/clock-bindings.txt.
-- clock-names:	Shall contain "fck". The "fck" is the GyroADC block clock.
-- power-domains: Must contain a reference to the PM domain, if available.
-- #address-cells: Should be <1> (setting for the subnodes) for all ADCs
-		except for "fujitsu,mb88101a". Should be <0> (setting for
-		only subnode) for "fujitsu,mb88101a".
-- #size-cells:	Should be <0> (setting for the subnodes)
-
-Sub-nodes:
-You must define subnode(s) which select the connected ADC type and reference
-voltage for the GyroADC channels.
-
-Required properties for subnodes:
-- compatible:	Should be either of:
-		"fujitsu,mb88101a"
-			- Fujitsu MB88101A compatible mode,
-			  12bit sampling, up to 4 channels can be sampled in
-			  round-robin fashion. One Fujitsu chip supplies four
-			  GyroADC channels with data as it contains four ADCs
-			  on the chip and thus for 4-channel operation, single
-			  MB88101A is required. The Cx chipselect lines of the
-			  MB88101A connect directly to two CHS lines of the
-			  GyroADC, no demuxer is required. The data out line
-			  of each MB88101A connects to a shared input pin of
-			  the GyroADC.
-		"ti,adcs7476" or "ti,adc121" or "adi,ad7476"
-			- TI ADCS7476 / TI ADC121 / ADI AD7476 compatible mode,
-			  15bit sampling, up to 8 channels can be sampled in
-			  round-robin fashion. One TI/ADI chip supplies single
-			  ADC channel with data, thus for 8-channel operation,
-			  8 chips are required. A 3:8 chipselect demuxer is
-			  required to connect the nCS line of the TI/ADI chips
-			  to the GyroADC, while MISO line of each TI/ADI ADC
-			  connects to a shared input pin of the GyroADC.
-		"maxim,max1162" or "maxim,max11100"
-			- Maxim MAX1162 / Maxim MAX11100 compatible mode,
-			  16bit sampling, up to 8 channels can be sampled in
-			  round-robin fashion. One Maxim chip supplies single
-			  ADC channel with data, thus for 8-channel operation,
-			  8 chips are required. A 3:8 chipselect demuxer is
-			  required to connect the nCS line of the MAX chips
-			  to the GyroADC, while MISO line of each Maxim ADC
-			  connects to a shared input pin of the GyroADC.
-- reg:		Should be the number of the analog input. Should be present
-		for all ADCs except "fujitsu,mb88101a".
-- vref-supply:	Reference to the channel reference voltage regulator.
-
-Example:
-	vref_max1162: regulator-vref-max1162 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "MAX1162 Vref";
-		regulator-min-microvolt = <4096000>;
-		regulator-max-microvolt = <4096000>;
-	};
-
-	adc@e6e54000 {
-		compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc";
-		reg = <0 0xe6e54000 0 64>;
-		clocks = <&mstp9_clks R8A7791_CLK_GYROADC>;
-		clock-names = "fck";
-		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-
-		pinctrl-0 = <&adc_pins>;
-		pinctrl-names = "default";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		adc@0 {
-			reg = <0>;
-			compatible = "maxim,max1162";
-			vref-supply = <&vref_max1162>;
-		};
-
-		adc@1 {
-			reg = <1>;
-			compatible = "maxim,max1162";
-			vref-supply = <&vref_max1162>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
new file mode 100644
index 000000000000..c115e2e99bd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/renesas,rcar-gyroadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car GyroADC
+
+maintainers:
+  - Marek Vasut <marek.vasut+renesas@gmail.com>
+
+description: |
+  The GyroADC block is a reduced SPI block with up to 8 chipselect lines,
+  which supports the SPI protocol of a selected few SPI ADCs. The SPI ADCs
+  are sampled by the GyroADC block in a round-robin fashion and the result
+  presented in the GyroADC registers.
+  The ADC bindings should match with that of the devices connected to a
+  full featured SPI bus.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7791-gyroadc
+          - renesas,r8a7792-gyroadc
+      - const: renesas,rcar-gyroadc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains: true
+
+  resets: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "@[0-7]$":
+    type: object
+    properties:
+      compatible:
+        description: |
+          fujitsu,mb88101a
+          - Fujitsu MB88101A compatible mode,
+            12bit sampling, up to 4 channels can be sampled in round-robin
+            fashion. One Fujitsu chip supplies four GyroADC channels with
+            data as it contains four ADCs on the chip and thus for 4-channel
+            operation, single MB88101A is required. The Cx chipselect lines
+            of the MB88101A connect directly to two CHS lines of the GyroADC,
+            no demuxer is required. The data out line of each MB88101A
+            connects to a shared input pin of the GyroADC.
+          ti,adcs7476 or ti,adc121 or adi,ad7476
+          - TI ADCS7476 / TI ADC121 / ADI AD7476 compatible mode, 15bit
+            sampling, up to 8 channels can be sampled in round-robin
+            fashion. One TI/ADI chip supplies single ADC channel with data,
+            thus for 8-channel operation, 8 chips are required.
+            A 3:8 chipselect demuxer is  required to connect the nCS line
+            of the TI/ADI chips to the GyroADC, while MISO line of each
+            TI/ADI ADC connects to a shared input pin of the GyroADC.
+          maxim,max1162 or maxim,max11100
+          - Maxim MAX1162 / Maxim MAX11100 compatible mode,  16bit sampling,
+            up to 8 channels can be sampled in round-robin fashion. One
+            Maxim chip supplies single ADC channel with data, thus for
+            8-channel operation, 8 chips are required.
+            A 3:8 chipselect demuxer is required to connect the nCS line
+            of the MAX chips to the GyroADC, while MISO line of each Maxim
+            ADC connects to a shared input pin of the GyroADC.
+        enum:
+          - adi,7476
+          - fujitsu,mb88101a
+          - maxim,max1162
+          - maxim,max11100
+          - ti,adcs7476
+          - ti,adc121
+
+      reg:
+        minimum: 0
+        maximum: 7
+
+      vref-supply: true
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - vref-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-clock.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        adc@e6e54000 {
+            compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc";
+            reg = <0 0xe6e54000 0 64>;
+            clocks = <&mstp9_clks R8A7791_CLK_GYROADC>;
+            clock-names = "fck";
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+
+            pinctrl-0 = <&adc_pins>;
+            pinctrl-names = "default";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            adc@0 {
+                reg = <0>;
+                compatible = "maxim,max1162";
+                vref-supply = <&vref_max1162>;
+            };
+
+            adc@1 {
+                reg = <1>;
+                compatible = "maxim,max1162";
+                vref-supply = <&vref_max1162>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
new file mode 100644
index 000000000000..61c6157cf5a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/renesas,rzg2l-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L ADC
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description: |
+  A/D Converter block is a successive approximation analog-to-digital converter
+  with a 12-bit accuracy. Up to eight analog input channels can be selected.
+  Conversions can be performed in single or repeat mode. Result of the ADC is
+  stored in a 32-bit data register corresponding to each channel.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g043-adc   # RZ/G2UL
+          - renesas,r9a07g044-adc   # RZ/G2L
+          - renesas,r9a07g054-adc   # RZ/V2L
+      - const: renesas,rzg2l-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: converter clock
+      - description: peripheral clock
+
+  clock-names:
+    items:
+      - const: adclk
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: adrst-n
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+
+patternProperties:
+  "^channel@[0-7]$":
+    $ref: "adc.yaml"
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number.
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043-adc
+    then:
+      patternProperties:
+        "^channel@[2-7]$": false
+        "^channel@[0-1]$":
+          properties:
+            reg:
+              minimum: 0
+              maximum: 1
+    else:
+      patternProperties:
+        "^channel@[0-7]$":
+          properties:
+            reg:
+              minimum: 0
+              maximum: 7
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    adc: adc@10059000 {
+      compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc";
+      reg = <0x10059000 0x400>;
+      interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>,
+               <&cpg CPG_MOD R9A07G044_ADC_PCLK>;
+      clock-names = "adclk", "pclk";
+      power-domains = <&cpg>;
+      resets = <&cpg R9A07G044_ADC_PRESETN>,
+               <&cpg R9A07G044_ADC_ADRST_N>;
+      reset-names = "presetn", "adrst-n";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      channel@0 {
+        reg = <0>;
+      };
+      channel@1 {
+        reg = <1>;
+      };
+      channel@2 {
+        reg = <2>;
+      };
+      channel@3 {
+        reg = <3>;
+      };
+      channel@4 {
+        reg = <4>;
+      };
+      channel@5 {
+        reg = <5>;
+      };
+      channel@6 {
+        reg = <6>;
+      };
+      channel@7 {
+        reg = <7>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
new file mode 100644
index 000000000000..88e008629ea8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
+  interface, and the device provides full information for system by reading
+  out the loading current and power.
+
+  The device monitors both of the drops across sense resistor and the BUS
+  voltage, converts into the current in amperes, and power in watts through
+  internal analog-to-digital converter ADC. The programmable calibration,
+  adjustable conversion time, and averaging function are also built in for
+  more design flexibility.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+
+properties:
+  compatible:
+    const: richtek,rtq6056
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  shunt-resistor-micro-ohms:
+    description: Shunt IN+/IN- sensing node resistor
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      adc@40 {
+        compatible = "richtek,rtq6056";
+        reg = <0x40>;
+        #io-channel-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
deleted file mode 100644
index c2c50b59873d..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Rockchip Successive Approximation Register (SAR) A/D Converter bindings
-
-Required properties:
-- compatible: should be "rockchip,<name>-saradc" or "rockchip,rk3066-tsadc"
-   - "rockchip,saradc": for rk3188, rk3288
-   - "rockchip,rk3066-tsadc": for rk3036
-   - "rockchip,rk3328-saradc", "rockchip,rk3399-saradc": for rk3328
-   - "rockchip,rk3399-saradc": for rk3399
-   - "rockchip,rv1108-saradc", "rockchip,rk3399-saradc": for rv1108
-
-- reg: physical base address of the controller and length of memory mapped
-       region.
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
-              depends on the interrupt controller.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "saradc" for the converter-clock, and "apb_pclk" for
-               the peripheral clock.
-- vref-supply: The regulator supply ADC reference voltage.
-- #io-channel-cells: Should be 1, see ../iio-bindings.txt
-
-Optional properties:
-- resets: Must contain an entry for each entry in reset-names if need support
-	  this option. See ../reset/reset.txt for details.
-- reset-names: Must include the name "saradc-apb".
-
-Example:
-	saradc: saradc@2006c000 {
-		compatible = "rockchip,saradc";
-		reg = <0x2006c000 0x100>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
-		clock-names = "saradc", "apb_pclk";
-		resets = <&cru SRST_SARADC>;
-		reset-names = "saradc-apb";
-		#io-channel-cells = <1>;
-		vref-supply = <&vcc18>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
new file mode 100644
index 000000000000..e512a14e41b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/rockchip-saradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Successive Approximation Register (SAR) A/D Converter
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,saradc
+      - const: rockchip,rk3066-tsadc
+      - const: rockchip,rk3399-saradc
+      - items:
+          - enum:
+              - rockchip,px30-saradc
+              - rockchip,rk3308-saradc
+              - rockchip,rk3328-saradc
+              - rockchip,rk3568-saradc
+              - rockchip,rv1108-saradc
+          - const: rockchip,rk3399-saradc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: converter clock
+      - description: peripheral clock
+
+  clock-names:
+    items:
+      - const: saradc
+      - const: apb_pclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: saradc-apb
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    saradc: saradc@2006c000 {
+      compatible = "rockchip,saradc";
+      reg = <0x2006c000 0x100>;
+      interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+      clock-names = "saradc", "apb_pclk";
+      resets = <&cru SRST_SARADC>;
+      reset-names = "saradc-apb";
+      vref-supply = <&vcc18>;
+      #io-channel-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index cc3c8ea6a894..81c87295912c 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -41,7 +41,10 @@ properties:
     maxItems: 2
 
   interrupts:
-    maxItems: 1
+    description:
+      ADC interrupt followed by optional touchscreen interrupt.
+    minItems: 1
+    maxItems: 2
 
   "#io-channel-cells":
     const: 1
@@ -68,6 +71,9 @@ required:
   - "#io-channel-cells"
   - vdd-supply
 
+additionalProperties:
+  type: object
+
 allOf:
   - if:
       properties:
@@ -78,7 +84,6 @@ allOf:
               - samsung,exynos-adc-v2
               - samsung,exynos3250-adc
               - samsung,exynos4212-adc
-              - samsung,s5pv210-adc
     then:
       required:
         - samsung,syscon-phandle
@@ -107,6 +112,15 @@ allOf:
           items:
             - const: adc
 
+  - if:
+      required:
+        - has-touchscreen
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
 examples:
   - |
     adc: adc@12d10000 {
@@ -114,7 +128,6 @@ examples:
         reg = <0x12d10000 0x100>;
         interrupts = <0 106 0>;
         #io-channel-cells = <1>;
-        io-channel-ranges;
 
         clocks = <&clock 303>;
         clock-names = "adc";
@@ -123,7 +136,7 @@ examples:
         samsung,syscon-phandle = <&pmu_system_controller>;
 
         /* NTC thermistor is a hwmon device */
-        ncp15wb473 {
+        thermistor {
             compatible = "murata,ncp15wb473";
             pullup-uv = <1800000>;
             pullup-ohm = <47000>;
@@ -140,7 +153,6 @@ examples:
         reg = <0x126C0000 0x100>;
         interrupts = <0 137 0>;
         #io-channel-cells = <1>;
-        io-channel-ranges;
 
         clocks = <&cmu CLK_TSADC>,
                  <&cmu CLK_SCLK_TSADC>;
diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
index a390343d0c2a..2287697f1f61 100644
--- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Device-Tree bindings for sigma delta modulator
 
 maintainers:
-  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
new file mode 100644
index 000000000000..44aa28b59197
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/sprd,sc2720-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC27XX series PMICs ADC binding
+
+maintainers:
+  - Baolin Wang <baolin.wang7@gmail.com>
+
+description:
+  Supports the ADC found on these PMICs.
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc2720-adc
+      - sprd,sc2721-adc
+      - sprd,sc2723-adc
+      - sprd,sc2730-adc
+      - sprd,sc2731-adc
+      - sprd,ump9620-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  hwlocks:
+    maxItems: 1
+
+  nvmem-cells: true
+
+  nvmem-cell-names: true
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - sprd,ump9620-adc
+    then:
+      properties:
+        nvmem-cells:
+          maxItems: 2
+        nvmem-cell-names:
+          items:
+            - const: big_scale_calib
+            - const: small_scale_calib
+
+    else:
+      properties:
+        nvmem-cells:
+          maxItems: 6
+        nvmem-cell-names:
+          items:
+            - const: big_scale_calib1
+            - const: big_scale_calib2
+            - const: small_scale_calib1
+            - const: small_scale_calib2
+            - const: vbat_det_cal1
+            - const: vbat_det_cal2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#io-channel-cells"
+  - hwlocks
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@480 {
+            compatible = "sprd,sc2731-adc";
+            reg = <0x480>;
+            interrupt-parent = <&sc2731_pmic>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            #io-channel-cells = <1>;
+            hwlocks = <&hwlock 4>;
+            nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
+            nvmem-cell-names = "big_scale_calib", "small_scale_calib";
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@504 {
+            compatible = "sprd,ump9620-adc";
+            reg = <0x504>;
+            interrupt-parent = <&ump9620_pmic>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            #io-channel-cells = <1>;
+            hwlocks = <&hwlock 4>;
+            nvmem-cells = <&adc_bcal1>, <&adc_bcal2>,
+                          <&adc_scal1>, <&adc_scal2>,
+                          <&vbat_det_cal1>, <&vbat_det_cal2>;
+            nvmem-cell-names = "big_scale_calib1", "big_scale_calib2",
+                               "small_scale_calib1", "small_scale_calib2",
+                               "vbat_det_cal1", "vbat_det_cal2";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt b/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt
deleted file mode 100644
index b4daa15dcf15..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Spreadtrum SC27XX series PMICs ADC binding
-
-Required properties:
-- compatible: Should be one of the following.
-	"sprd,sc2720-adc"
-	"sprd,sc2721-adc"
-	"sprd,sc2723-adc"
-	"sprd,sc2730-adc"
-	"sprd,sc2731-adc"
-- reg: The address offset of ADC controller.
-- interrupt-parent: The interrupt controller.
-- interrupts: The interrupt number for the ADC device.
-- #io-channel-cells: Number of cells in an IIO specifier.
-- hwlocks: Reference to a phandle of a hwlock provider node.
-- nvmem-cells: A phandle to the calibration cells provided by eFuse device.
-- nvmem-cell-names: Should be "big_scale_calib", "small_scale_calib".
-
-Example:
-
-	sc2731_pmic: pmic@0 {
-		compatible = "sprd,sc2731";
-		reg = <0>;
-		spi-max-frequency = <26000000>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmic_adc: adc@480 {
-			compatible = "sprd,sc2731-adc";
-			reg = <0x480>;
-			interrupt-parent = <&sc2731_pmic>;
-			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-			#io-channel-cells = <1>;
-			hwlocks = <&hwlock 4>;
-			nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
-			nvmem-cell-names = "big_scale_calib", "small_scale_calib";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
deleted file mode 100644
index 8de933146771..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ /dev/null
@@ -1,149 +0,0 @@
-STMicroelectronics STM32 ADC device driver
-
-STM32 ADC is a successive approximation analog-to-digital converter.
-It has several multiplexed input channels. Conversions can be performed
-in single, continuous, scan or discontinuous mode. Result of the ADC is
-stored in a left-aligned or right-aligned 32-bit data register.
-Conversions can be launched in software or using hardware triggers.
-
-The analog watchdog feature allows the application to detect if the input
-voltage goes beyond the user-defined, higher or lower thresholds.
-
-Each STM32 ADC block can have up to 3 ADC instances.
-
-Each instance supports two contexts to manage conversions, each one has its
-own configurable sequence and trigger:
-- regular conversion can be done in sequence, running in background
-- injected conversions have higher priority, and so have the ability to
-  interrupt regular conversion sequence (either triggered in SW or HW).
-  Regular sequence is resumed, in case it has been interrupted.
-
-Contents of a stm32 adc root node:
------------------------------------
-Required properties:
-- compatible: Should be one of:
-  "st,stm32f4-adc-core"
-  "st,stm32h7-adc-core"
-  "st,stm32mp1-adc-core"
-- reg: Offset and length of the ADC block register set.
-- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
-  and stm32h7 share a common ADC interrupt line. stm32mp1 has two separate
-  interrupt lines, one for each ADC within ADC block.
-- clocks: Core can use up to two clocks, depending on part used:
-  - "adc" clock: for the analog circuitry, common to all ADCs.
-    It's required on stm32f4.
-    It's optional on stm32h7.
-  - "bus" clock: for registers access, common to all ADCs.
-    It's not present on stm32f4.
-    It's required on stm32h7.
-- clock-names: Must be "adc" and/or "bus" depending on part used.
-- interrupt-controller: Identifies the controller node as interrupt-parent
-- vdda-supply: Phandle to the vdda input analog voltage.
-- vref-supply: Phandle to the vref input analog reference voltage.
-- #interrupt-cells = <1>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- A pinctrl state named "default" for each ADC channel may be defined to set
-  inX ADC pins in mode of operation for analog input on external pin.
-- booster-supply: Phandle to the embedded booster regulator that can be used
-  to supply ADC analog input switches on stm32h7 and stm32mp1.
-- vdd-supply: Phandle to the vdd input voltage. It can be used to supply ADC
-  analog input switches on stm32mp1.
-- st,syscfg: Phandle to system configuration controller. It can be used to
-  control the analog circuitry on stm32mp1.
-- st,max-clk-rate-hz: Allow to specify desired max clock rate used by analog
-  circuitry.
-
-Contents of a stm32 adc child node:
------------------------------------
-An ADC block node should contain at least one subnode, representing an
-ADC instance available on the machine.
-
-Required properties:
-- compatible: Should be one of:
-  "st,stm32f4-adc"
-  "st,stm32h7-adc"
-  "st,stm32mp1-adc"
-- reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
-- clocks: Input clock private to this ADC instance. It's required only on
-  stm32f4, that has per instance clock input for registers access.
-- interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or
-  2 for adc@200).
-- st,adc-channels: List of single-ended channels muxed for this ADC.
-  It can have up to 16 channels on stm32f4 or 20 channels on stm32h7, numbered
-  from 0 to 15 or 19 (resp. for in0..in15 or in0..in19).
-- st,adc-diff-channels: List of differential channels muxed for this ADC.
-  Depending on part used, some channels can be configured as differential
-  instead of single-ended (e.g. stm32h7). List here positive and negative
-  inputs pairs as <vinp vinn>, <vinp vinn>,... vinp and vinn are numbered
-  from 0 to 19 on stm32h7)
-  Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is required.
-  Both properties can be used together. Some channels can be used as
-  single-ended and some other ones as differential (mixed). But channels
-  can't be configured both as single-ended and differential (invalid).
-- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
-  Documentation/devicetree/bindings/iio/iio-bindings.txt
-
-Optional properties:
-- dmas: Phandle to dma channel for this ADC instance.
-  See ../../dma/dma.txt for details.
-- dma-names: Must be "rx" when dmas property is being used.
-- assigned-resolution-bits: Resolution (bits) to use for conversions. Must
-  match device available resolutions:
-  * can be 6, 8, 10 or 12 on stm32f4
-  * can be 8, 10, 12, 14 or 16 on stm32h7
-  Default is maximum resolution if unset.
-- st,min-sample-time-nsecs: Minimum sampling time in nanoseconds.
-  Depending on hardware (board) e.g. high/low analog input source impedance,
-  fine tune of ADC sampling time may be recommended.
-  This can be either one value or an array that matches 'st,adc-channels' list,
-  to set sample time resp. for all channels, or independently for each channel.
-
-Example:
-	adc: adc@40012000 {
-		compatible = "st,stm32f4-adc-core";
-		reg = <0x40012000 0x400>;
-		interrupts = <18>;
-		clocks = <&rcc 0 168>;
-		clock-names = "adc";
-		vref-supply = <&reg_vref>;
-		interrupt-controller;
-		pinctrl-names = "default";
-		pinctrl-0 = <&adc3_in8_pin>;
-
-		#interrupt-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		adc@0 {
-			compatible = "st,stm32f4-adc";
-			#io-channel-cells = <1>;
-			reg = <0x0>;
-			clocks = <&rcc 0 168>;
-			interrupt-parent = <&adc>;
-			interrupts = <0>;
-			st,adc-channels = <8>;
-			dmas = <&dma2 0 0 0x400 0x0>;
-			dma-names = "rx";
-			assigned-resolution-bits = <8>;
-		};
-		...
-		other adc child nodes follow...
-	};
-
-Example to setup:
-- channel 1 as single-ended
-- channels 2 & 3 as differential (with resp. 6 & 7 negative inputs)
-
-	adc: adc@40022000 {
-		compatible = "st,stm32h7-adc-core";
-		...
-		adc1: adc@0 {
-			compatible = "st,stm32h7-adc";
-			...
-			st,adc-channels = <1>;
-			st,adc-diff-channels = <2 6>, <3 7>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
new file mode 100644
index 000000000000..fa8da42cb1e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -0,0 +1,546 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 ADC bindings
+
+description: |
+  STM32 ADC is a successive approximation analog-to-digital converter.
+  It has several multiplexed input channels. Conversions can be performed
+  in single, continuous, scan or discontinuous mode. Result of the ADC is
+  stored in a left-aligned or right-aligned 32-bit data register.
+  Conversions can be launched in software or using hardware triggers.
+
+  The analog watchdog feature allows the application to detect if the input
+  voltage goes beyond the user-defined, higher or lower thresholds.
+
+  Each STM32 ADC block can have up to 3 ADC instances.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-adc-core
+      - st,stm32h7-adc-core
+      - st,stm32mp1-adc-core
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      One or more interrupts for ADC block, depending on part used:
+        - stm32f4 and stm32h7 share a common ADC interrupt line.
+        - stm32mp1 has two separate interrupt lines, one for each ADC within
+          ADC block.
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Core can use up to two clocks, depending on part used:
+        - "adc" clock: for the analog circuitry, common to all ADCs.
+          It's required on stm32f4.
+          It's optional on stm32h7 and stm32mp1.
+        - "bus" clock: for registers access, common to all ADCs.
+          It's not present on stm32f4.
+          It's required on stm32h7 and stm32mp1.
+
+  clock-names: true
+
+  st,max-clk-rate-hz:
+    description:
+      Allow to specify desired max clock rate used by analog circuitry.
+
+  vdda-supply:
+    description: Phandle to the vdda input analog voltage.
+
+  vref-supply:
+    description: Phandle to the vref input analog reference voltage.
+
+  booster-supply:
+    description:
+      Phandle to the embedded booster regulator that can be used to supply ADC
+      analog input switches on stm32h7 and stm32mp1.
+
+  vdd-supply:
+    description:
+      Phandle to the vdd input voltage. It can be used to supply ADC analog
+      input switches on stm32mp1.
+
+  st,syscfg:
+    description:
+      Phandle to system configuration controller. It can be used to control the
+      analog circuitry on stm32mp1.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32f4-adc-core
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          const: adc
+
+        interrupts:
+          items:
+            - description: interrupt line common for all ADCs
+
+        st,max-clk-rate-hz:
+          minimum: 600000
+          maximum: 36000000
+          default: 36000000
+
+        booster-supply: false
+
+        vdd-supply: false
+
+        st,syscfg: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32h7-adc-core
+
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 2
+
+        clock-names:
+          items:
+            - const: bus
+            - const: adc
+          minItems: 1
+
+        interrupts:
+          items:
+            - description: interrupt line common for all ADCs
+
+        st,max-clk-rate-hz:
+          minimum: 120000
+          maximum: 36000000
+          default: 36000000
+
+        vdd-supply: false
+
+        st,syscfg: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp1-adc-core
+
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 2
+
+        clock-names:
+          items:
+            - const: bus
+            - const: adc
+          minItems: 1
+
+        interrupts:
+          items:
+            - description: interrupt line for ADC1
+            - description: interrupt line for ADC2
+
+        st,max-clk-rate-hz:
+          minimum: 120000
+          maximum: 36000000
+          default: 36000000
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vdda-supply
+  - vref-supply
+  - interrupt-controller
+  - '#interrupt-cells'
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  "^adc@[0-9]+$":
+    type: object
+    description:
+      An ADC block node should contain at least one subnode, representing an
+      ADC instance available on the machine.
+
+    properties:
+      compatible:
+        enum:
+          - st,stm32f4-adc
+          - st,stm32h7-adc
+          - st,stm32mp1-adc
+
+      reg:
+        description: |
+          Offset of ADC instance in ADC block. Valid values are:
+            - 0x0:   ADC1
+            - 0x100: ADC2
+            - 0x200: ADC3 (stm32f4 only)
+        maxItems: 1
+
+      '#io-channel-cells':
+        const: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      interrupts:
+        description: |
+          IRQ Line for the ADC instance. Valid values are:
+            - 0 for adc@0
+            - 1 for adc@100
+            - 2 for adc@200 (stm32f4 only)
+        maxItems: 1
+
+      clocks:
+        description:
+          Input clock private to this ADC instance. It's required only on
+          stm32f4, that has per instance clock input for registers access.
+        maxItems: 1
+
+      dmas:
+        description: RX DMA Channel
+        maxItems: 1
+
+      dma-names:
+        const: rx
+
+      assigned-resolution-bits:
+        description: |
+          Resolution (bits) to use for conversions:
+            - can be 6, 8, 10 or 12 on stm32f4
+            - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1
+
+      st,adc-channels:
+        description: |
+          List of single-ended channels muxed for this ADC. It can have up to:
+            - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4
+            - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and
+              stm32mp1.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        deprecated: true
+
+      st,adc-diff-channels:
+        description: |
+          List of differential channels muxed for this ADC. Some channels can
+          be configured as differential instead of single-ended on stm32h7 and
+          on stm32mp1. Positive and negative inputs pairs are listed:
+          <vinp vinn>, <vinp vinn>,... vinp and vinn are numbered from 0 to 19.
+
+          Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is
+          required if no adc generic channel is defined. These legacy channel
+          properties are exclusive with adc generic channel bindings.
+          Both properties can be used together. Some channels can be
+          used as single-ended and some other ones as differential (mixed). But
+          channels can't be configured both as single-ended and differential.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "vinp" indicates positive input number
+              minimum: 0
+              maximum: 19
+            - description: |
+                "vinn" indicates negative input number
+              minimum: 0
+              maximum: 19
+        deprecated: true
+
+      st,min-sample-time-nsecs:
+        description:
+          Minimum sampling time in nanoseconds. Depending on hardware (board)
+          e.g. high/low analog input source impedance, fine tune of ADC
+          sampling time may be recommended. This can be either one value or an
+          array that matches "st,adc-channels" and/or "st,adc-diff-channels"
+          list, to set sample time resp. for all channels, or independently for
+          each channel.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        deprecated: true
+
+      nvmem-cells:
+        items:
+          - description: Phandle to the calibration vrefint data provided by otp
+
+      nvmem-cell-names:
+        items:
+          - const: vrefint
+
+    patternProperties:
+      "^channel@([0-9]|1[0-9])$":
+        type: object
+        $ref: "adc.yaml"
+        description: Represents the external channels which are connected to the ADC.
+
+        properties:
+          reg:
+            items:
+              minimum: 0
+              maximum: 19
+
+          label:
+            description: |
+              Unique name to identify which channel this is.
+              Reserved label names "vddcore", "vrefint" and "vbat"
+              are used to identify internal channels with matching names.
+
+          diff-channels:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              minimum: 0
+              maximum: 19
+
+          st,min-sample-time-ns:
+            description: |
+              Minimum sampling time in nanoseconds. Depending on hardware (board)
+              e.g. high/low analog input source impedance, fine tune of ADC
+              sampling time may be recommended.
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32f4-adc
+
+        then:
+          properties:
+            reg:
+              enum:
+                - 0x0
+                - 0x100
+                - 0x200
+
+            interrupts:
+              minimum: 0
+              maximum: 2
+
+            assigned-resolution-bits:
+              enum: [6, 8, 10, 12]
+              default: 12
+
+            st,adc-channels:
+              minItems: 1
+              maxItems: 16
+              items:
+                minimum: 0
+                maximum: 15
+
+            st,adc-diff-channels: false
+
+            st,min-sample-time-nsecs:
+              minItems: 1
+              maxItems: 16
+              items:
+                minimum: 80
+
+          required:
+            - clocks
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                enum:
+                  - st,stm32h7-adc
+                  - st,stm32mp1-adc
+
+        then:
+          properties:
+            reg:
+              enum:
+                - 0x0
+                - 0x100
+
+            interrupts:
+              minimum: 0
+              maximum: 1
+
+            assigned-resolution-bits:
+              enum: [8, 10, 12, 14, 16]
+              default: 16
+
+            st,adc-channels:
+              minItems: 1
+              maxItems: 20
+              items:
+                minimum: 0
+                maximum: 19
+
+            st,min-sample-time-nsecs:
+              minItems: 1
+              maxItems: 20
+              items:
+                minimum: 40
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - '#io-channel-cells'
+
+examples:
+  - |
+    // Example 1: with stm32f429, ADC1, single-ended channel 8
+      adc123: adc@40012000 {
+        compatible = "st,stm32f4-adc-core";
+        reg = <0x40012000 0x400>;
+        interrupts = <18>;
+        clocks = <&rcc 0 168>;
+        clock-names = "adc";
+        st,max-clk-rate-hz = <36000000>;
+        vdda-supply = <&vdda>;
+        vref-supply = <&vref>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+          compatible = "st,stm32f4-adc";
+          #io-channel-cells = <1>;
+          reg = <0x0>;
+          clocks = <&rcc 0 168>;
+          interrupt-parent = <&adc123>;
+          interrupts = <0>;
+          st,adc-channels = <8>;
+          dmas = <&dma2 0 0 0x400 0x0>;
+          dma-names = "rx";
+          assigned-resolution-bits = <8>;
+        };
+        // ...
+        // other adc child nodes follow...
+      };
+
+  - |
+    // Example 2: with stm32mp157c to setup ADC1 with:
+    // - channels 0 & 1 as single-ended
+    // - channels 2 & 3 as differential (with resp. 6 & 7 negative inputs)
+      #include <dt-bindings/interrupt-controller/arm-gic.h>
+      #include <dt-bindings/clock/stm32mp1-clks.h>
+      adc12: adc@48003000 {
+        compatible = "st,stm32mp1-adc-core";
+        reg = <0x48003000 0x400>;
+        interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+        clock-names = "bus", "adc";
+        booster-supply = <&booster>;
+        vdd-supply = <&vdd>;
+        vdda-supply = <&vdda>;
+        vref-supply = <&vref>;
+        st,syscfg = <&syscfg>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+          compatible = "st,stm32mp1-adc";
+          #io-channel-cells = <1>;
+          reg = <0x0>;
+          interrupt-parent = <&adc12>;
+          interrupts = <0>;
+          st,adc-channels = <0 1>;
+          st,adc-diff-channels = <2 6>, <3 7>;
+          st,min-sample-time-nsecs = <5000>;
+          dmas = <&dmamux1 9 0x400 0x05>;
+          dma-names = "rx";
+        };
+        // ...
+        // other adc child node follow...
+      };
+
+  - |
+    // Example 3: with stm32mp157c to setup ADC2 with:
+    // - internal channels 13, 14, 15.
+      #include <dt-bindings/interrupt-controller/arm-gic.h>
+      #include <dt-bindings/clock/stm32mp1-clks.h>
+      adc122: adc@48003000 {
+        compatible = "st,stm32mp1-adc-core";
+        reg = <0x48003000 0x400>;
+        interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+        clock-names = "bus", "adc";
+        booster-supply = <&booster>;
+        vdd-supply = <&vdd>;
+        vdda-supply = <&vdda>;
+        vref-supply = <&vref>;
+        st,syscfg = <&syscfg>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@100 {
+          compatible = "st,stm32mp1-adc";
+          #io-channel-cells = <1>;
+          reg = <0x100>;
+          interrupts = <1>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+          channel@13 {
+            reg = <13>;
+            label = "vrefint";
+            st,min-sample-time-ns = <9000>;
+          };
+          channel@14 {
+            reg = <14>;
+            label = "vddcore";
+            st,min-sample-time-ns = <9000>;
+          };
+          channel@15 {
+            reg = <15>;
+            label = "vbat";
+            st,min-sample-time-ns = <9000>;
+          };
+        };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index acf36eef728b..1970503389aa 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 DFSDM ADC device driver
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
-  - Olivier Moysan <olivier.moysan@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+  - Olivier Moysan <olivier.moysan@foss.st.com>
 
 description: |
   STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
@@ -38,14 +38,12 @@ properties:
           dfsdm clock can also feed CLKOUT, when CLKOUT is used.
       - description: audio clock can be used as an alternate to feed CLKOUT.
     minItems: 1
-    maxItems: 2
 
   clock-names:
     items:
       - const: dfsdm
       - const: audio
     minItems: 1
-    maxItems: 2
 
   "#address-cells":
     const: 1
@@ -69,9 +67,12 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: false
+
 patternProperties:
   "^filter@[0-9]+$":
     type: object
+    unevaluatedProperties: false
     description: child node
 
     properties:
@@ -93,16 +94,13 @@ patternProperties:
           On stm32h7 and stm32mp1:
           - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
           - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              minimum: 0
-              maximum: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minimum: 0
+          maximum: 7
 
       st,adc-channel-names:
         description: List of single-ended channel names.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string-array
 
       st,filter-order:
         description: |
@@ -110,11 +108,8 @@ patternProperties:
           - 0: FastSinC
           - [1-5]: order 1 to 5.
           For audio purpose it is recommended to use order 3 to 5.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - items:
-              minimum: 0
-              maximum: 5
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 5
 
       "#io-channel-cells":
         const: 1
@@ -128,8 +123,7 @@ patternProperties:
           - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
         items:
           enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
 
       st,adc-channel-clk-src:
         description: |
@@ -140,8 +134,7 @@ patternProperties:
           - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
         items:
           enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
 
       st,adc-alt-channel:
         description:
@@ -180,7 +173,7 @@ patternProperties:
               contains:
                 const: st,stm32-dfsdm-adc
 
-      - then:
+        then:
           properties:
             st,adc-channels:
               minItems: 1
@@ -202,8 +195,6 @@ patternProperties:
               description:
                 From common IIO binding. Used to pipe external sigma delta
                 modulator or internal ADC output to DFSDM channel.
-                This is not required for "st,stm32-dfsdm-pdm" compatibility as
-                PDM microphone is binded in Audio DT node.
 
           required:
             - io-channels
@@ -214,7 +205,7 @@ patternProperties:
               contains:
                 const: st,stm32-dfsdm-dmic
 
-      - then:
+        then:
           properties:
             st,adc-channels:
               maxItems: 1
@@ -235,9 +226,14 @@ patternProperties:
           patternProperties:
             "^dfsdm-dai+$":
               type: object
+              additionalProperties: false
               description: child node
 
               properties:
+                compatible:
+                  enum:
+                    - st,stm32h7-dfsdm-dai
+
                 "#sound-dai-cells":
                   const: 0
 
@@ -247,6 +243,7 @@ patternProperties:
                     modulator or internal ADC output to DFSDM channel.
 
               required:
+                - compatible
                 - "#sound-dai-cells"
                 - io-channels
 
@@ -257,7 +254,7 @@ allOf:
           contains:
             const: st,stm32h7-dfsdm
 
-  - then:
+    then:
       patternProperties:
         "^filter@[0-9]+$":
           properties:
@@ -272,7 +269,7 @@ allOf:
           contains:
             const: st,stm32mp1-dfsdm
 
-  - then:
+    then:
       patternProperties:
         "^filter@[0-9]+$":
           properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
new file mode 100644
index 000000000000..333744a2159c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/st,stmpe-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC on an STMPE multifunction device.
+
+maintainers:
+  - Stefan Agner <stefan@agner.ch>
+
+description:
+  This ADC forms part of an ST microelectronics STMPE multifunction device .
+  The ADC is shared with the STMPE touchscreen. As a result some ADC related
+  settings are specified in the parent node.
+  The node should be a child node of the stmpe node to which it belongs.
+
+properties:
+  compatible:
+    const: st,stmpe-adc
+
+  st,norequest-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitmask specifying which ADC channels should _not_ be
+      requestable due to different usage (e.g. touch).
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    stmpe {
+        stmpe_adc {
+            compatible = "st,stmpe-adc";
+            st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
deleted file mode 100644
index 480e66422625..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-STMPE ADC driver
-----------------
-
-Required properties:
- - compatible: "st,stmpe-adc"
-
-Optional properties:
-Note that the ADC is shared with the STMPE touchscreen. ADC related settings
-have to be done in the mfd.
-- st,norequest-mask: bitmask specifying which ADC channels should _not_ be
-  requestable due to different usage (e.g. touch)
-
-Node name must be stmpe_adc and should be child node of stmpe node to
-which it belongs.
-
-Example:
-
-	stmpe_adc {
-		compatible = "st,stmpe-adc";
-		st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
new file mode 100644
index 000000000000..686721176a58
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc0832.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC0832 and similar ADCs
+
+maintainers:
+  - Akinobu Mita <akinobu.mita@gmail.com>
+
+description: |
+  8 bit ADCs with 1, 2, 4 or 8 inputs for single ended or differential
+  conversion.
+
+properties:
+  compatible:
+    enum:
+      - ti,adc0831
+      - ti,adc0832
+      - ti,adc0834
+      - ti,adc0838
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: External reference, needed to establish input scaling
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc0832";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <200000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
new file mode 100644
index 000000000000..726d2cbfa368
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc084s021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC084S021 ADC
+
+maintainers:
+  - Mårten Lindahl <martenli@axis.com>
+
+description: |
+  8 bit ADC with 4 channels
+
+properties:
+  compatible:
+    const: ti,adc084s021
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: External reference, needed to establish input scaling
+
+  spi-cpol: true
+  spi-cpha: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+  - spi-cpol
+  - spi-cpha
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc084s021";
+            reg = <0>;
+            vref-supply = <&adc_vref>;
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <16000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
new file mode 100644
index 000000000000..9b072b057f16
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc108s102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC108S102 and ADC128S102
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Family of 8 channel, 10/12 bit, SPI, single ended ADCs.
+
+properties:
+  compatible:
+    const:
+      ti,adc108s102
+
+  reg: true
+  vref-supply: true
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells= <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc108s102";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <1000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
new file mode 100644
index 000000000000..076088a328c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc12138.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC12138 and similar self-calibrating ADCs
+
+maintainers:
+  - Akinobu Mita <akinobu.mita@gmail.com>
+
+description: |
+  13 bit ADCs with 1, 2 or 8 inputs and self calibrating circuitry to
+  correct for linearity, zero and full scale errors.
+
+properties:
+  compatible:
+    enum:
+      - ti,adc12130
+      - ti,adc12132
+      - ti,adc12138
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: End of Conversion (EOC) interrupt
+
+  clocks:
+    maxItems: 1
+    description: Conversion clock input.
+
+  vref-p-supply:
+    description: The regulator supply for positive analog voltage reference
+
+  vref-n-supply:
+    description: |
+      The regulator supply for negative analog voltage reference
+      (Note that this must not go below GND or exceed vref-p)
+      If not specified, this is assumed to be analog ground.
+
+  ti,acquisition-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 6, 10, 18, 34 ]
+    description: |
+      The number of conversion clock periods for the S/H's acquisition time.
+      For high source impedances, this value can be increased to 18 or 34.
+      For less ADC accuracy and/or slower CCLK frequencies this value may be
+      decreased to 6.  See section 6.0 INPUT SOURCE RESISTANCE in the
+      datasheet for details.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - vref-p-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc12138";
+            reg = <0>;
+            interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+            interrupt-parent = <&gpio1>;
+            clocks = <&cclk>;
+            vref-p-supply = <&ldo4_reg>;
+            spi-max-frequency = <5000000>;
+            ti,acquisition-time = <6>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
new file mode 100644
index 000000000000..775eee972b12
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc128s052.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC128S052 and similar ADCs
+
+maintainers:
+  - Angelo Compagnucci <angelo.compagnucci@gmail.com>
+
+description: |
+  Family of 12 bit SPI ADCs with 2 to 8 channels with a range of different
+  target sample rates.
+
+properties:
+  compatible:
+    enum:
+      - ti,adc122s021
+      - ti,adc122s051
+      - ti,adc122s101
+      - ti,adc124s021
+      - ti,adc124s051
+      - ti,adc124s101
+      - ti,adc128s052
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc128s052";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <1000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
new file mode 100644
index 000000000000..afe782522904
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc161s626.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC141S626 and ADC161S626 ADCs
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description: |
+  Single channel 14/16bit differential ADCs
+
+properties:
+  compatible:
+    enum:
+      - ti,adc141s626
+      - ti,adc161s626
+
+  reg:
+    maxItems: 1
+
+  vdda-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc161s626";
+            vdda-supply = <&vdda_fixed>;
+            reg = <0>;
+            spi-max-frequency = <4300000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
new file mode 100644
index 000000000000..2c3c2cf2145c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI ADS1015/ADS1115 4 channel I2C analog to digital converter
+
+maintainers:
+  - Daniel Baluta <daniel.baluta@nxp.com>
+
+description: |
+  Datasheet at: https://www.ti.com/lit/gpn/ads1015
+  Supports both single ended and differential channels.
+
+properties:
+  compatible:
+    enum:
+      - ti,ads1015
+      - ti,ads1115
+      - ti,tla2024
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@[0-7]+$":
+    type: object
+    additionalProperties: false
+    description:
+      Child nodes needed for each channel that the platform uses.
+
+    properties:
+      reg:
+        description: |
+          0: Voltage over AIN0 and AIN1.
+          1: Voltage over AIN0 and AIN3.
+          2: Voltage over AIN1 and AIN3.
+          3: Voltage over AIN2 and AIN3.
+          4: Voltage over AIN0 and GND.
+          5: Voltage over AIN1 and GND.
+          6: Voltage over AIN2 and GND.
+          7: Voltage over AIN3 and GND.
+        items:
+          - minimum: 0
+            maximum: 7
+
+      ti,gain:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 5
+        description: |
+          pga is the programmable gain amplifier (values are full scale)
+          0: +/- 6.144 V
+          1: +/- 4.096 V
+          2: +/- 2.048 V (default)
+          3: +/- 1.024 V
+          4: +/- 0.512 V
+          5: +/- 0.256 V
+
+      ti,datarate:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 6
+        description: |
+          Data acquisition rate in samples per second
+          0: 128
+          1: 250
+          2: 490
+          3: 920
+          4: 1600 (default)
+          5: 2400
+          6: 3300
+
+    required:
+      - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@49 {
+            compatible = "ti,ads1015";
+            reg = <0x49>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+              reg = <0>;
+            };
+            channel@4 {
+              reg = <4>;
+              ti,gain = <3>;
+              ti,datarate = <5>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
new file mode 100644
index 000000000000..56a3f1766aab
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads124s08.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' ads124s08 and ads124s06 ADC chip
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,ads124s06
+      - ti,ads124s08
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  reset-gpios:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,ads124s08";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpha;
+            reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
new file mode 100644
index 000000000000..55c2c73626f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads131e08.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  The ADS131E0x are a family of multichannel, simultaneous sampling,
+  24-bit, delta-sigma, analog-to-digital converters (ADCs) with a
+  built-in programmable gain amplifier (PGA), internal reference
+  and an onboard oscillator.
+  The communication with ADC chip is via the SPI bus (mode 1).
+
+  https://www.ti.com/lit/ds/symlink/ads131e08.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,ads131e04
+      - ti,ads131e06
+      - ti,ads131e08
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  clocks:
+    description: |
+      Device tree identifier to the clock source (2.048 MHz).
+      Note: clock source is selected using CLKSEL pin.
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc-clk
+
+  interrupts:
+    description: |
+      IRQ line for the ADC data ready.
+    maxItems: 1
+
+  vref-supply:
+    description: |
+      Optional external voltage reference. If not supplied, internal voltage
+      reference is used.
+
+  ti,vref-internal:
+    description: |
+      Select the internal voltage reference value.
+      0: 2.4V
+      1: 4.0V
+      If this field is left empty, 2.4V is selected.
+      Note: internal voltage reference is used only if vref-supply is not supplied.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    default: 0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - clocks
+  - clock-names
+  - interrupts
+
+patternProperties:
+  "^channel@([0-7])$":
+    $ref: "adc.yaml"
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number.
+          Up to 4 channels, numbered from 0 to 3 for ti,ads131e04.
+          Up to 6 channels, numbered from 0 to 5 for ti,ads131e06.
+          Up to 8 channels, numbered from 0 to 7 for ti,ads131e08.
+        items:
+          minimum: 0
+          maximum: 7
+
+      ti,gain:
+        description: |
+          The PGA gain value for the channel.
+          If this field is left empty, PGA gain 1 is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2, 4, 8, 12]
+        default: 1
+
+      ti,mux:
+        description: |
+          Channel input selection(muliplexer).
+          0: Normal input.
+          1: Input shorted to (VREFP + VREFN) / 2 (for offset or noise measurements).
+          3: MVDD (for supply measurement)
+          4: Temperature sensor
+          If this field is left empty, normal input is selected.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 3, 4]
+        default: 0
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "ti,ads131e08";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cpha;
+        clocks = <&clk2048k>;
+        clock-names = "adc-clk";
+        interrupt-parent = <&gpio5>;
+        interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+        vref-supply = <&adc_vref>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+        };
+
+        channel@1 {
+          reg = <1>;
+        };
+
+        channel@2 {
+          reg = <2>;
+          ti,gain = <2>;
+        };
+
+        channel@3 {
+          reg = <3>;
+        };
+
+        channel@4 {
+          reg = <4>;
+        };
+
+        channel@5 {
+          reg = <5>;
+        };
+
+        channel@6 {
+          reg = <6>;
+        };
+
+        channel@7 {
+          reg = <7>;
+          ti,mux = <4>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml
new file mode 100644
index 000000000000..5ab5027be97e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads7950.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS7950 and similar ADCs
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+description: |
+  Family of 4-16 channel, 8-12 bit ADCs with SPI interface.
+
+properties:
+  compatible:
+    enum:
+      - ti,ads7950
+      - ti,ads7951
+      - ti,ads7952
+      - ti,ads7953
+      - ti,ads7954
+      - ti,ads7955
+      - ti,ads7956
+      - ti,ads7957
+      - ti,ads7958
+      - ti,ads7959
+      - ti,ads7960
+      - ti,ads7961
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  vref-supply:
+    description: Supplies the 2.5V or 5V reference voltage
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,ads7957";
+            reg = <0>;
+            vref-supply = <&refin_supply>;
+            spi-max-frequency = <10000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
new file mode 100644
index 000000000000..f75b2c702986
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads8344.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS8344 ADC
+
+maintainers:
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+description: |
+  16bit 8-channel ADC with single ended inputs.
+
+properties:
+  compatible:
+    const: ti,ads8344
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: Supply the 2.5V or 5V reference voltage
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,ads8344";
+            reg = <0>;
+            vref-supply = <&refin_supply>;
+            spi-max-frequency = <10000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
new file mode 100644
index 000000000000..f26fdbc15f84
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads8688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' ADS8684 and ADS8688 ADC chip
+
+maintainers:
+  - Sean Nyekjaer <sean@geanix.com>
+
+description: |
+   SPI 16bit ADCs with 4/8 channels.
+
+properties:
+  compatible:
+    enum:
+      - ti,ads8684
+      - ti,ads8688
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: Optional external reference.  If not supplied, assume
+      REFSEL input tied low to enable the internal reference.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,ads8688";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
new file mode 100644
index 000000000000..b32be24a9f98
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,am3359-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 ADC
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,am3359-adc
+          - ti,am4372-adc
+      - items:
+          - enum:
+              - ti,am654-adc
+          - const: ti,am3359-adc
+
+  '#io-channel-cells':
+    const: 1
+
+  ti,adc-channels:
+    description: List of analog inputs available for ADC. AIN0 = 0, AIN1 = 1 and
+      so on until AIN7 = 7.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-opendelay:
+    description: List of open delays for each channel of ADC in the order of
+      ti,adc-channels. The value corresponds to the number of ADC clock cycles
+      to wait after applying the step configuration registers and before sending
+      the start of ADC conversion. Maximum value is 0x3FFFF.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-sampledelay:
+    description: List of sample delays for each channel of ADC in the order of
+      ti,adc-channels. The value corresponds to the number of ADC clock cycles
+      to sample (to hold start of conversion high). Maximum value is 0xFF.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-avg:
+    description: Number of averages to be performed for each channel of ADC. If
+      average is 16 (this is also the maximum) then input is sampled 16 times
+      and averaged to get more accurate value. This increases the time taken by
+      ADC to generate a sample. Maximum value is 16.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - '#io-channel-cells'
+  - ti,adc-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+        compatible = "ti,am3359-adc";
+        #io-channel-cells = <1>;
+        ti,adc-channels = <4 5 6 7>;
+        ti,chan-step-opendelay = <0x098 0x3ffff 0x098 0x0>;
+        ti,chan-step-sampledelay = <0xff 0x0 0xf 0x0>;
+        ti,chan-step-avg = <16 2 4 8>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
new file mode 100644
index 000000000000..57a31356082e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,palmas-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Palmas general purpose ADC IP block devicetree bindings
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: |
+  This ADC is often used to provide channels via the io-channels
+  consumer framework.
+  Channels list:
+    0 battery type
+    1 battery temp NTC (optional current source)
+    2 GP
+    3 temp (with ext. diode, optional current source)
+    4 GP
+    5 GP
+    6 VBAT_SENSE
+    7 VCC_SENSE
+    8 Backup Battery voltage
+    9 external charger (VCHG)
+    10 VBUS
+    11 DC-DC current probe (how does this work?)
+    12 internal die temp
+    13 internal die temp
+    14 USB ID pin voltage
+    15 test network
+
+properties:
+  compatible:
+    const: ti,palmas-gpadc
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  "#io-channel-cells":
+    const: 1
+
+  ti,channel0-current-microamp:
+    description: Channel 0 current in uA.
+    enum:
+      - 0
+      - 5
+      - 15
+      - 20
+
+  ti,channel3-current-microamp:
+    description: Channel 3 current in uA.
+    enum:
+      - 0
+      - 10
+      - 400
+      - 800
+
+  ti,enable-extended-delay:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enable extended delay.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    pmic {
+        compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
+        adc {
+            compatible = "ti,palmas-gpadc";
+            interrupts = <18 0>,
+                         <16 0>,
+                         <17 0>;
+            #io-channel-cells = <1>;
+            ti,channel0-current-microamp = <5>;
+            ti,channel3-current-microamp = <10>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
new file mode 100644
index 000000000000..314d1d99bf73
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,tlc4541.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLC4541 and similar ADCs
+
+maintainers:
+  - Phil Reid <preid@electromag.com.au>
+
+description: |
+  14/16bit single channel ADC with SPI interface.
+
+properties:
+  compatible:
+    enum:
+      - ti,tlc3541
+      - ti,tlc4541
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,tlc4541";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <200000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
new file mode 100644
index 000000000000..bdf3bba2d750
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,tsc2046.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TSC2046 touch screen controller.
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  TSC2046 is a touch screen controller with 8 channels ADC.
+
+properties:
+  compatible:
+    enum:
+      - ti,tsc2046e-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-supply:
+    description: Optional supply of the reference voltage
+
+  "#io-channel-cells":
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^channel@[0-7]$":
+    $ref: "adc.yaml"
+    type: object
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 8 channels
+        items:
+          minimum: 0
+          maximum: 7
+
+      settling-time-us: true
+      oversampling-ratio: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,tsc2046e-adc";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+            #io-channel-cells = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+              reg = <0>;
+            };
+            channel@1 {
+              reg = <1>;
+              settling-time-us = <700>;
+              oversampling-ratio = <5>;
+            };
+            channel@2 {
+              reg = <2>;
+            };
+            channel@3 {
+              reg = <3>;
+              settling-time-us = <700>;
+              oversampling-ratio = <5>;
+            };
+            channel@4 {
+              reg = <4>;
+              settling-time-us = <700>;
+              oversampling-ratio = <5>;
+            };
+            channel@5 {
+              reg = <5>;
+              settling-time-us = <700>;
+              oversampling-ratio = <5>;
+            };
+            channel@6 {
+              reg = <6>;
+            };
+            channel@7 {
+              reg = <7>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml
new file mode 100644
index 000000000000..6781ad2f0f51
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,twl4030-madc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MADC subsystem in the TWL4030 power module
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description:
+  The MADC subsystem in the TWL4030 consists of a 10-bit ADC
+  combined with a 16-input analog multiplexer.
+
+properties:
+  compatible:
+    const: ti,twl4030-madc
+
+  interrupts:
+    maxItems: 1
+
+  ti,system-uses-second-madc-irq:
+    type: boolean
+    description:
+      Set if the second madc irq register should be used, which is intended
+      to be used  by Co-Processors (e.g. a modem).
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    twl {
+        madc {
+            compatible = "ti,twl4030-madc";
+            interrupts = <3>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt
deleted file mode 100644
index d91130587d01..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Texas Instruments' ADC0831/ADC0832/ADC0832/ADC0838
-
-Required properties:
- - compatible: Should be one of
-	* "ti,adc0831"
-	* "ti,adc0832"
-	* "ti,adc0834"
-	* "ti,adc0838"
- - reg: spi chip select number for the device
- - vref-supply: The regulator supply for ADC reference voltage
- - spi-max-frequency: Max SPI frequency to use (< 400000)
-
-Example:
-adc@0 {
-	compatible = "ti,adc0832";
-	reg = <0>;
-	vref-supply = <&vdd_supply>;
-	spi-max-frequency = <200000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt
deleted file mode 100644
index 4259e50620bc..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Texas Instruments' ADC084S021
-
-Required properties:
- - compatible        : Must be "ti,adc084s021"
- - reg               : SPI chip select number for the device
- - vref-supply       : The regulator supply for ADC reference voltage
- - spi-cpol          : Per spi-bus bindings
- - spi-cpha          : Per spi-bus bindings
- - spi-max-frequency : Per spi-bus bindings
-
-Example:
-adc@0 {
-	compatible = "ti,adc084s021";
-	reg = <0>;
-	vref-supply = <&adc_vref>;
-	spi-cpol;
-	spi-cpha;
-	spi-max-frequency = <16000000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt
deleted file mode 100644
index bbbbb4a9f58f..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Texas Instruments' ADC108S102 and ADC128S102 ADC chip
-
-Required properties:
- - compatible: Should be "ti,adc108s102"
- - reg: spi chip select number for the device
- - vref-supply: The regulator supply for ADC reference voltage
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "ti,adc108s102";
-	reg = <0>;
-	vref-supply = <&vdd_supply>;
-	spi-max-frequency = <1000000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
deleted file mode 100644
index 049a1d36f013..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Texas Instruments' ADC12130/ADC12132/ADC12138
-
-Required properties:
- - compatible: Should be one of
-	* "ti,adc12130"
-	* "ti,adc12132"
-	* "ti,adc12138"
- - reg: SPI chip select number for the device
- - interrupts: Should contain interrupt for EOC (end of conversion)
- - clocks: phandle to conversion clock input
- - spi-max-frequency: Definision as per
-	Documentation/devicetree/bindings/spi/spi-bus.txt
- - vref-p-supply: The regulator supply for positive analog voltage reference
-
-Optional properties:
- - vref-n-supply: The regulator supply for negative analog voltage reference
-	(Note that this must not go below GND or exceed vref-p)
-	If not specified, this is assumed to be analog ground.
- - ti,acquisition-time: The number of conversion clock periods for the S/H's
-	acquisition time.  Should be one of 6, 10, 18, 34.  If not specified,
-	default value of 10 is used.
-	For high source impedances, this value can be increased to 18 or 34.
-	For less ADC accuracy and/or slower CCLK frequencies this value may be
-	decreased to 6.  See section 6.0 INPUT SOURCE RESISTANCE in the
-	datasheet for details.
-
-Example:
-adc@0 {
-	compatible = "ti,adc12138";
-	reg = <0>;
-	interrupts = <28 IRQ_TYPE_EDGE_RISING>;
-	interrupt-parent = <&gpio1>;
-	clocks = <&cclk>;
-	vref-p-supply = <&ldo4_reg>;
-	spi-max-frequency = <5000000>;
-	ti,acquisition-time = <6>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt
deleted file mode 100644
index c07ce1a3f5c4..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip
-
-Required properties:
- - compatible: Should be one of:
-   - "ti,adc128s052"
-   - "ti,adc122s021"
-   - "ti,adc122s051"
-   - "ti,adc122s101"
-   - "ti,adc124s021"
-   - "ti,adc124s051"
-   - "ti,adc124s101"
- - reg: spi chip select number for the device
- - vref-supply: The regulator supply for ADC reference voltage
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "ti,adc128s052";
-	reg = <0>;
-	vref-supply = <&vdd_supply>;
-	spi-max-frequency = <1000000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt
deleted file mode 100644
index 3d25011f0c99..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Texas Instruments ADC141S626 and ADC161S626 chips
-
-Required properties:
- - compatible: Should be "ti,adc141s626" or "ti,adc161s626"
- - reg: spi chip select number for the device
- - vdda-supply: supply voltage to VDDA pin
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "ti,adc161s626";
-	vdda-supply = <&vdda_fixed>;
-	reg = <0>;
-	spi-max-frequency = <4300000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt
deleted file mode 100644
index ecf807bb32f7..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Texas Instruments' ads124s08 and ads124s06 ADC chip
-
-Required properties:
- - compatible :
-	"ti,ads124s08"
-	"ti,ads124s06"
- - reg : spi chip select number for the device
-
-Recommended properties:
- - spi-max-frequency : Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
- - spi-cpha : Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Optional properties:
- - reset-gpios : GPIO pin used to reset the device.
-
-Example:
-adc@0 {
-	compatible = "ti,ads124s08";
-	reg = <0>;
-	spi-max-frequency = <1000000>;
-	spi-cpha;
-	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt
deleted file mode 100644
index e77a6f7e1001..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Texas Instruments ADS7950 family of A/DC chips
-
-Required properties:
- - compatible: Must be one of "ti,ads7950", "ti,ads7951", "ti,ads7952",
-   "ti,ads7953", "ti,ads7954", "ti,ads7955", "ti,ads7956", "ti,ads7957",
-   "ti,ads7958", "ti,ads7959", "ti,ads7960", or "ti,ads7961"
- - reg: SPI chip select number for the device
- - #io-channel-cells: Must be 1 as per ../iio-bindings.txt
- - vref-supply: phandle to a regulator node that supplies the 2.5V or 5V
-   reference voltage
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "ti,ads7957";
-	reg = <0>;
-	#io-channel-cells = <1>;
-	vref-supply = <&refin_supply>;
-	spi-max-frequency = <10000000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
deleted file mode 100644
index e47c3759a82b..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Texas Instruments ADS8344 A/DC chip
-
-Required properties:
- - compatible: Must be "ti,ads8344"
- - reg: SPI chip select number for the device
- - vref-supply: phandle to a regulator node that supplies the
-   reference voltage
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "ti,ads8344";
-	reg = <0>;
-	vref-supply = <&refin_supply>;
-	spi-max-frequency = <10000000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt
deleted file mode 100644
index a02337d7efa4..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Texas Instruments' ADS8684 and ADS8688 ADC chip
-
-Required properties:
- - compatible: Should be "ti,ads8684" or "ti,ads8688"
- - reg: spi chip select number for the device
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Optional properties:
- - vref-supply: The regulator supply for ADC reference voltage
-
-Example:
-adc@0 {
-	compatible = "ti,ads8688";
-	reg = <0>;
-	vref-supply = <&vdd_supply>;
-	spi-max-frequency = <1000000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt b/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt
deleted file mode 100644
index 6bdd21404b57..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* TWL4030 Monitoring Analog to Digital Converter (MADC)
-
-The MADC subsystem in the TWL4030 consists of a 10-bit ADC
-combined with a 16-input analog multiplexer.
-
-Required properties:
-  - compatible: Should contain "ti,twl4030-madc".
-  - interrupts: IRQ line for the MADC submodule.
-  - #io-channel-cells: Should be set to <1>.
-
-Optional properties:
-  - ti,system-uses-second-madc-irq: boolean, set if the second madc irq register
-				    should be used, which is intended to be used
-				    by Co-Processors (e.g. a modem).
-
-Example:
-
-&twl {
-	madc {
-		compatible = "ti,twl4030-madc";
-		interrupts = <3>;
-		#io-channel-cells = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
deleted file mode 100644
index 1aad0514e647..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Freescale vf610 Analog to Digital Converter bindings
-
-The devicetree bindings are for the new ADC driver written for
-vf610/i.MX6slx and upward SoCs from Freescale.
-
-Required properties:
-- compatible: Should contain "fsl,vf610-adc"
-- reg: Offset and length of the register set for the device
-- interrupts: Should contain the interrupt for the device
-- clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock.
-- clock-names: Must contain "adc", matching entry in the clocks property.
-- vref-supply: The regulator supply ADC reference voltage.
-
-Recommended properties:
-- fsl,adck-max-frequency: Maximum frequencies according to datasheets operating
-  requirements. Three values are required, depending on conversion mode:
-  - Frequency in normal mode (ADLPC=0, ADHSC=0)
-  - Frequency in high-speed mode (ADLPC=0, ADHSC=1)
-  - Frequency in low-power mode (ADLPC=1, ADHSC=0)
-- min-sample-time: Minimum sampling time in nanoseconds. This value has
-  to be chosen according to the conversion mode and the connected analog
-  source resistance (R_as) and capacitance (C_as). Refer the datasheet's
-  operating requirements. A safe default across a wide range of R_as and
-  C_as as well as conversion modes is 1000ns.
-
-Example:
-adc0: adc@4003b000 {
-	compatible = "fsl,vf610-adc";
-	reg = <0x4003b000 0x1000>;
-	interrupts = <0 53 0x04>;
-	clocks = <&clks VF610_CLK_ADC0>;
-	clock-names = "adc";
-	fsl,adck-max-frequency = <30000000>, <40000000>,
-				<20000000>;
-	vref-supply = <&reg_vcc_3v3_mcu>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
new file mode 100644
index 000000000000..d6d3d8590171
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/x-powers,axp209-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: X-Powers AXP ADC bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+
+description: |
+  ADC is frequently used as a provider to consumers of the ADC channels.
+  Device is a child of an axp209 multifunction device
+  ADC channels and their indexes per variant:
+
+  AXP209
+  ------
+   0 | acin_v
+   1 | acin_i
+   2 | vbus_v
+   3 | vbus_i
+   4 | pmic_temp
+   5 | gpio0_v
+   6 | gpio1_v
+   7 | ipsout_v
+   8 | batt_v
+   9 | batt_chrg_i
+  10 | batt_dischrg_i
+  11 | ts_v
+
+  AXP22x
+  ------
+   0 | pmic_temp
+   1 | batt_v
+   2 | batt_chrg_i
+   3 | batt_dischrg_i
+   4 | ts_v
+
+  AXP813
+  ------
+   0 | pmic_temp
+   1 | gpio0_v
+   2 | batt_v
+   3 | batt_chrg_i
+   4 | batt_dischrg_i
+   5 | ts_v
+
+
+properties:
+  compatible:
+    oneOf:
+      - const: x-powers,axp209-adc
+      - const: x-powers,axp221-adc
+      - const: x-powers,axp813-adc
+
+      - items:
+          - const: x-powers,axp803-adc
+          - const: x-powers,axp813-adc
+
+  "#io-channel-cells":
+    const: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    axp221 {
+        adc {
+            compatible = "x-powers,axp221-adc";
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index e0e0755cabd8..f42e18078376 100644
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -1,13 +1,22 @@
 Xilinx XADC device driver
 
-This binding document describes the bindings for both of them since the
-bindings are very similar. The Xilinx XADC is a ADC that can be found in the
-series 7 FPGAs from Xilinx. The XADC has a DRP interface for communication.
-Currently two different frontends for the DRP interface exist. One that is only
-available on the ZYNQ family as a hardmacro in the SoC portion of the ZYNQ. The
-other one is available on all series 7 platforms and is a softmacro with a AXI
-interface. This binding document describes the bindings for both of them since
-the bindings are very similar.
+This binding document describes the bindings for the Xilinx 7 Series XADC as well
+as the UltraScale/UltraScale+ System Monitor.
+
+The Xilinx XADC is an ADC that can be found in the Series 7 FPGAs from Xilinx.
+The XADC has a DRP interface for communication. Currently two different
+frontends for the DRP interface exist. One that is only available on the ZYNQ
+family as a hardmacro in the SoC portion of the ZYNQ. The other one is available
+on all series 7 platforms and is a softmacro with a AXI interface. This binding
+document describes the bindings for both of them since the bindings are very
+similar.
+
+The Xilinx System Monitor is an ADC that is found in the UltraScale and
+UltraScale+ FPGAs from Xilinx. The System Monitor provides a DRP interface for
+communication. Xilinx provides a standard IP core that can be used to access the
+System Monitor through an AXI interface in the FPGA fabric. This IP core is
+called the Xilinx System Management Wizard. This document describes the bindings
+for this IP.
 
 Required properties:
 	- compatible: Should be one of
@@ -15,11 +24,14 @@ Required properties:
 		  configuration interface to interface to the XADC hardmacro.
 		* "xlnx,axi-xadc-1.00.a": When using the axi-xadc pcore to
 		  interface to the XADC hardmacro.
+		* "xlnx,system-management-wiz-1.3": When using the
+		  Xilinx System Management Wizard fabric IP core to access the
+		  UltraScale and UltraScale+ System Monitor.
 	- reg: Address and length of the register set for the device
 	- interrupts: Interrupt for the XADC control interface.
 	- clocks: When using the ZYNQ this must be the ZYNQ PCAP clock,
-	  when using the AXI-XADC pcore this must be the clock that provides the
-	  clock to the AXI bus interface of the core.
+	  when using the axi-xadc or the axi-system-management-wizard this must be
+	  the clock that provides the clock to the AXI bus interface of the core.
 
 Optional properties:
 	- xlnx,external-mux:
@@ -110,3 +122,20 @@ Examples:
 			};
 		};
 	};
+
+	adc@80000000 {
+		compatible = "xlnx,system-management-wiz-1.3";
+		reg = <0x80000000 0x1000>;
+		interrupts = <0 81 4>;
+		interrupt-parent = <&gic>;
+		clocks = <&fpga1_clk>;
+
+		xlnx,channels {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			channel@0 {
+				reg = <0>;
+				xlnx,bipolar;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
new file mode 100644
index 000000000000..be93c109d6ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale AMS controller
+
+maintainers:
+  - Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
+
+description: |
+  The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors
+  that can be used to sample external voltages and monitor on-die operating
+  conditions, such as temperature and supply voltage levels.
+  The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and
+  PS (Processing System) SYSMON.
+  All designs should have AMS registers, but PS and PL are optional. The
+  AMS controller can work with only PS, only PL and both PS and PL
+  configurations. Please specify registers according to your design. Devicetree
+  should always have AMS module property. Providing PS & PL module is optional.
+
+  AMS Channel Details
+  ```````````````````
+  Sysmon Block  |Channel|                       Details                                 |Measurement
+                |Number |                                                               |Type
+  ---------------------------------------------------------------------------------------------------------
+  AMS CTRL      |0      |System PLLs voltage measurement, VCC_PSPLL.                    |Voltage
+                |1      |Battery voltage measurement, VCC_PSBATT.                       |Voltage
+                |2      |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |3      |Block RAM voltage measurement, VCCBRAM.                        |Voltage
+                |4      |PL Aux voltage measurement, VCCAUX.                            |Voltage
+                |5      |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL.       |Voltage
+                |6      |VCC_PSINTFP_DDR voltage measurement.                           |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PS Sysmon     |7      |LPD temperature measurement.                                   |Temperature
+                |8      |FPD temperature measurement (REMOTE).                          |Temperature
+                |9      |VCC PS LPD voltage measurement (supply1).                      |Voltage
+                |10     |VCC PS FPD voltage measurement (supply2).                      |Voltage
+                |11     |PS Aux voltage reference (supply3).                            |Voltage
+                |12     |DDR I/O VCC voltage measurement.                               |Voltage
+                |13     |PS IO Bank 503 voltage measurement (supply5).                  |Voltage
+                |14     |PS IO Bank 500 voltage measurement (supply6).                  |Voltage
+                |15     |VCCO_PSIO1 voltage measurement.                                |Voltage
+                |16     |VCCO_PSIO2 voltage measurement.                                |Voltage
+                |17     |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC).                 |Voltage
+                |18     |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT).                 |Voltage
+                |19     |VCC_PSADC voltage measurement.                                 |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PL Sysmon     |20     |PL temperature measurement.                                    |Temperature
+                |21     |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |22     |PL Auxiliary voltage measurement, VCCAUX.                      |Voltage
+                |23     |ADC Reference P+ voltage measurement.                          |Voltage
+                |24     |ADC Reference N- voltage measurement.                          |Voltage
+                |25     |PL Block RAM voltage measurement, VCCBRAM.                     |Voltage
+                |26     |LPD Internal voltage measurement, VCC_PSINTLP (supply4).       |Voltage
+                |27     |FPD Internal voltage measurement, VCC_PSINTFP (supply5).       |Voltage
+                |28     |PS Auxiliary voltage measurement (supply6).                    |Voltage
+                |29     |PL VCCADC voltage measurement (vccams).                        |Voltage
+                |30     |Differential analog input signal voltage measurment.           |Voltage
+                |31     |VUser0 voltage measurement (supply7).                          |Voltage
+                |32     |VUser1 voltage measurement (supply8).                          |Voltage
+                |33     |VUser2 voltage measurement (supply9).                          |Voltage
+                |34     |VUser3 voltage measurement (supply10).                         |Voltage
+                |35     |Auxiliary ch 0 voltage measurement (VAux0).                    |Voltage
+                |36     |Auxiliary ch 1 voltage measurement (VAux1).                    |Voltage
+                |37     |Auxiliary ch 2 voltage measurement (VAux2).                    |Voltage
+                |38     |Auxiliary ch 3 voltage measurement (VAux3).                    |Voltage
+                |39     |Auxiliary ch 4 voltage measurement (VAux4).                    |Voltage
+                |40     |Auxiliary ch 5 voltage measurement (VAux5).                    |Voltage
+                |41     |Auxiliary ch 6 voltage measurement (VAux6).                    |Voltage
+                |42     |Auxiliary ch 7 voltage measurement (VAux7).                    |Voltage
+                |43     |Auxiliary ch 8 voltage measurement (VAux8).                    |Voltage
+                |44     |Auxiliary ch 9 voltage measurement (VAux9).                    |Voltage
+                |45     |Auxiliary ch 10 voltage measurement (VAux10).                  |Voltage
+                |46     |Auxiliary ch 11 voltage measurement (VAux11).                  |Voltage
+                |47     |Auxiliary ch 12 voltage measurement (VAux12).                  |Voltage
+                |48     |Auxiliary ch 13 voltage measurement (VAux13).                  |Voltage
+                |49     |Auxiliary ch 14 voltage measurement (VAux14).                  |Voltage
+                |50     |Auxiliary ch 15 voltage measurement (VAux15).                  |Voltage
+  --------------------------------------------------------------------------------------------------------
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynqmp-ams
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    description: AMS Controller register space
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AMS reference clock
+
+  ranges:
+    description:
+      Maps the child address space for PS and/or PL.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#io-channel-cells':
+    const: 1
+
+  ams-ps@0:
+    type: object
+    description: |
+      PS (Processing System) SYSMON is memory mapped to PS. This block has
+      built-in alarm generation logic that is used to interrupt the processor
+      based on condition set.
+
+    properties:
+      compatible:
+        enum:
+          - xlnx,zynqmp-ams-ps
+
+      reg:
+        description: Register Space for PS-SYSMON
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+  ams-pl@400:
+    type: object
+    additionalProperties: false
+    description:
+      PL-SYSMON is capable of monitoring off chip voltage and temperature.
+      PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
+      from external master. Out of this interface currently only DRP is
+      supported. This block has alarm generation logic that is used to
+      interrupt the processor based on condition set.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - xlnx,zynqmp-ams-pl
+
+      reg:
+        description: Register Space for PL-SYSMON.
+        maxItems: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^channel@([2-4][0-9]|50)$":
+        type: object
+        description:
+          Describes the external channels connected.
+
+        properties:
+          reg:
+            description:
+              Pair of pins the channel is connected to. This value is
+              same as Channel Number for a particular channel.
+            minimum: 20
+            maximum: 50
+
+          xlnx,bipolar:
+            $ref: /schemas/types.yaml#/definitions/flag
+            type: boolean
+            description:
+              If the set channel is used in bipolar mode.
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        xilinx_ams: ams@ffa50000 {
+            compatible = "xlnx,zynqmp-ams";
+            interrupt-parent = <&gic>;
+            interrupts = <0 56 4>;
+            reg = <0x0 0xffa50000 0x0 0x800>;
+            clocks = <&zynqmp_clk AMS_REF>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            #io-channel-cells = <1>;
+            ranges = <0 0 0xffa50800 0x800>;
+
+            ams_ps: ams-ps@0 {
+                compatible = "xlnx,zynqmp-ams-ps";
+                reg = <0 0x400>;
+            };
+
+            ams_pl: ams-pl@400 {
+                compatible = "xlnx,zynqmp-ams-pl";
+                reg = <0x400 0x400>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                channel@30 {
+                    reg = <30>;
+                    xlnx,bipolar;
+                };
+                channel@31 {
+                    reg = <31>;
+                };
+                channel@38 {
+                    reg = <38>;
+                    xlnx,bipolar;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
new file mode 100644
index 000000000000..03bb90a7f4f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/addac/adi,ad74413r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD74412R/AD74413R device
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The AD74412R and AD74413R are quad-channel software configurable input/output
+  solutions for building and process control applications. They contain
+  functionality for analog output, analog input, digital input, resistance
+  temperature detector, and thermocouple measurements integrated
+  into a single chip solution with an SPI interface.
+  The devices feature a 16-bit ADC and four configurable 13-bit DACs to provide
+  four configurable input/output channels and a suite of diagnostic functions.
+  The AD74413R differentiates itself from the AD74412R by being HART-compatible.
+    https://www.analog.com/en/products/ad74412r.html
+    https://www.analog.com/en/products/ad74413r.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad74412r
+      - adi,ad74413r
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  spi-cpol: true
+
+  interrupts:
+    maxItems: 1
+
+  refin-supply: true
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt (sense) resistor value in micro-Ohms.
+    default: 100000000
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - spi-cpol
+  - refin-supply
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@[0-3]$":
+    type: object
+    additionalProperties: false
+    description: Represents the external channels which are connected to the device.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 4 channels numbered from 0 to 3.
+        minimum: 0
+        maximum: 3
+
+      adi,ch-func:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Channel function.
+          HART functions are not supported on AD74412R.
+          0 - CH_FUNC_HIGH_IMPEDANCE
+          1 - CH_FUNC_VOLTAGE_OUTPUT
+          2 - CH_FUNC_CURRENT_OUTPUT
+          3 - CH_FUNC_VOLTAGE_INPUT
+          4 - CH_FUNC_CURRENT_INPUT_EXT_POWER
+          5 - CH_FUNC_CURRENT_INPUT_LOOP_POWER
+          6 - CH_FUNC_RESISTANCE_INPUT
+          7 - CH_FUNC_DIGITAL_INPUT_LOGIC
+          8 - CH_FUNC_DIGITAL_INPUT_LOOP_POWER
+          9 - CH_FUNC_CURRENT_INPUT_EXT_POWER_HART
+          10 - CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART
+        minimum: 0
+        maximum: 10
+        default: 0
+
+      adi,gpo-comparator:
+        type: boolean
+        description: |
+          Whether to configure GPO as a comparator or not.
+          When not configured as a comparator, the GPO will be treated as an
+          output-only GPIO.
+
+    required:
+      - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/iio/addac/adi,ad74413r.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+      status = "okay";
+
+      ad74413r@0 {
+        compatible = "adi,ad74413r";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cpol;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+        refin-supply = <&ad74413r_refin>;
+
+        channel@0 {
+          reg = <0>;
+
+          adi,ch-func = <CH_FUNC_VOLTAGE_OUTPUT>;
+        };
+
+        channel@1 {
+          reg = <1>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_OUTPUT>;
+        };
+
+        channel@2 {
+          reg = <2>;
+
+          adi,ch-func = <CH_FUNC_DIGITAL_INPUT_LOGIC>;
+          adi,gpo-comparator;
+        };
+
+        channel@3 {
+          reg = <3>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_INPUT_EXT_POWER>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.txt b/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.txt
deleted file mode 100644
index 821b61b8c542..000000000000
--- a/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Current Sense Amplifier
-=======================
-
-When an io-channel measures the output voltage from a current sense
-amplifier, the interesting measurement is almost always the current
-through the sense resistor, not the voltage output. This binding
-describes such a current sense circuit.
-
-Required properties:
-- compatible : "current-sense-amplifier"
-- io-channels : Channel node of a voltage io-channel.
-- sense-resistor-micro-ohms : The sense resistance in microohms.
-
-Optional properties:
-- sense-gain-mult: Amplifier gain multiplier. The default is <1>.
-- sense-gain-div: Amplifier gain divider. The default is <1>.
-
-Example:
-
-sysi {
-	compatible = "current-sense-amplifier";
-	io-channels = <&tiadc 0>;
-
-	sense-resistor-micro-ohms = <20000>;
-	sense-gain-mul = <50>;
-};
diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml b/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml
new file mode 100644
index 000000000000..527501c1d695
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/current-sense-amplifier.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Current Sense Amplifier
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  When an io-channel measures the output voltage from a current sense
+  amplifier, the interesting measurement is almost always the current
+  through the sense resistor, not the voltage output. This binding
+  describes such a current sense circuit.
+
+properties:
+  compatible:
+    const: current-sense-amplifier
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  sense-resistor-micro-ohms:
+    description: The sense resistance.
+
+  sense-gain-mult:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Amplifier gain multiplier. The default is <1>.
+
+  sense-gain-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Amplifier gain divider. The default is <1>.
+
+required:
+  - compatible
+  - io-channels
+  - sense-resistor-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    sysi {
+        compatible = "current-sense-amplifier";
+        io-channels = <&tiadc 0>;
+
+        sense-resistor-micro-ohms = <20000>;
+        sense-gain-mult = <50>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt b/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt
deleted file mode 100644
index 0f67108a07b6..000000000000
--- a/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Current Sense Shunt
-===================
-
-When an io-channel measures the voltage over a current sense shunt,
-the interesting measurement is almost always the current through the
-shunt, not the voltage over it. This binding describes such a current
-sense circuit.
-
-Required properties:
-- compatible : "current-sense-shunt"
-- io-channels : Channel node of a voltage io-channel.
-- shunt-resistor-micro-ohms : The shunt resistance in microohms.
-
-Example:
-The system current is measured by measuring the voltage over a
-3.3 ohms shunt resistor.
-
-sysi {
-	compatible = "current-sense-shunt";
-	io-channels = <&tiadc 0>;
-
-	/* Divide the voltage by 3300000/1000000 (or 3.3) for the current. */
-	shunt-resistor-micro-ohms = <3300000>;
-};
-
-&i2c {
-	tiadc: adc@48 {
-		compatible = "ti,ads1015";
-		reg = <0x48>;
-		#io-channel-cells = <1>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@0 { /* IN0,IN1 differential */
-			reg = <0>;
-			ti,gain = <1>;
-			ti,datarate = <4>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml b/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml
new file mode 100644
index 000000000000..f8a112c9a822
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/current-sense-shunt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Current Sense Shunt
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  When an io-channel measures the voltage over a current sense shunt,
+  the interesting measurement is almost always the current through the
+  shunt, not the voltage over it. This binding describes such a current
+  sense circuit.
+
+properties:
+  compatible:
+    const: current-sense-shunt
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  "#io-channel-cells":
+    const: 0
+
+  shunt-resistor-micro-ohms:
+    description: The shunt resistance.
+
+required:
+  - compatible
+  - io-channels
+  - shunt-resistor-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        tiadc: adc@48 {
+            compatible = "ti,ads1015";
+            reg = <0x48>;
+            #io-channel-cells = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 { /* IN0,IN1 differential */
+                reg = <0>;
+                ti,gain = <1>;
+                ti,datarate = <4>;
+            };
+        };
+    };
+    sysi {
+        compatible = "current-sense-shunt";
+        io-channels = <&tiadc 0>;
+        #io-channel-cells = <0>;
+
+        /* Divide the voltage by 3300000/1000000 (or 3.3) for the current. */
+        shunt-resistor-micro-ohms = <3300000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml b/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml
new file mode 100644
index 000000000000..336ce96371db
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/temperature-sense-rtd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Sense RTD
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  RTDs (Resistance Temperature Detectors) are a kind of temperature sensors
+  used to get a linear voltage to temperature reading within a give range
+  (usually 0 to 100 degrees Celsius).
+
+  When an io-channel measures the output voltage across an RTD such as a
+  PT1000, the interesting measurement is almost always the corresponding
+  temperature, not the voltage output. This binding describes such a circuit.
+
+  The general transfer function here is (using SI units)
+
+    V = R(T) * iexc
+    R(T) = r0 * (1 + alpha * T)
+    T = 1 / (alpha * r0 * iexc) * (V - r0 * iexc)
+
+  The following circuit matches what's in the examples section.
+
+           5V0
+          -----
+            |
+        +---+----+
+        |  R 5k  |
+        +---+----+
+            |
+            V 1mA
+            |
+            +---- Vout
+            |
+        +---+----+
+        | PT1000 |
+        +---+----+
+            |
+          -----
+           GND
+
+properties:
+  compatible:
+    const: temperature-sense-rtd
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  '#io-channel-cells':
+    const: 0
+
+  excitation-current-microamp:
+    description: The current fed through the RTD sensor.
+
+  alpha-ppm-per-celsius:
+    description: |
+      alpha can also be expressed in micro-ohms per ohm Celsius. It's a linear
+      approximation of the resistance versus temperature relationship
+      between 0 and 100 degrees Celsius.
+
+      alpha = (R_100 - R_0) / (100 * R_0)
+
+      Where, R_100 is the resistance of the sensor at 100 degrees Celsius, and
+      R_0 (or r-naught-ohms) is the resistance of the sensor at 0 degrees
+      Celsius.
+
+      Pure platinum has an alpha of 3925. Industry standards such as IEC60751
+      and ASTM E-1137 specify an alpha of 3850.
+
+  r-naught-ohms:
+    description: |
+      Resistance of the sensor at 0 degrees Celsius.
+      Common values are 100 for PT100, 500 for PT500, and 1000 for PT1000
+
+additionalProperties: false
+required:
+  - compatible
+  - io-channels
+  - excitation-current-microamp
+  - alpha-ppm-per-celsius
+  - r-naught-ohms
+
+examples:
+  - |
+    pt1000_1: temperature-sensor0 {
+        compatible = "temperature-sense-rtd";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc1 0>;
+
+        excitation-current-microamp = <1000>; /* i = U/R = 5 / 5000 */
+        alpha-ppm-per-celsius = <3908>;
+        r-naught-ohms = <1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml b/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml
new file mode 100644
index 000000000000..cfbf5350db27
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/temperature-transducer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Transducer
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  A temperature transducer is a device that converts a thermal quantity
+  into any other physical quantity. This binding applies to temperature to
+  voltage (like the LTC2997), and temperature to current (like the AD590)
+  linear transducers.
+  In both cases these are assumed to be connected to a voltage ADC.
+
+  When an io-channel measures the output voltage of a temperature analog front
+  end such as a temperature transducer, the interesting measurement is almost
+  always the corresponding temperature, not the voltage output. This binding
+  describes such a circuit.
+
+  The general transfer function here is (using SI units)
+    V(T) = Rsense * Isense(T)
+    T = (Isense(T) / alpha) + offset
+    T = 1 / (Rsense * alpha) * (V + offset * Rsense * alpha)
+
+  When using a temperature to voltage transducer, Rsense is set to 1.
+
+  The following circuits show a temperature to current and a temperature to
+  voltage transducer that can be used with this binding.
+
+           VCC
+          -----
+            |
+        +---+---+
+        | AD590 |                               VCC
+        +---+---+                              -----
+            |                                    |
+            V proportional to T             +----+----+
+            |                          D+ --+         |
+            +---- Vout                      | LTC2997 +--- Vout
+            |                          D- --+         |
+        +---+----+                          +---------+
+        | Rsense |                               |
+        +---+----+                             -----
+            |                                   GND
+          -----
+           GND
+
+properties:
+  compatible:
+    const: temperature-transducer
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  '#io-channel-cells':
+    const: 0
+
+  sense-offset-millicelsius:
+    description: |
+      Temperature offset.
+      This offset is commonly used to convert from Kelvins to degrees Celsius.
+      In that case, sense-offset-millicelsius would be set to <(-273150)>.
+    default: 0
+
+  sense-resistor-ohms:
+    description: |
+      The sense resistor.
+      By default sense-resistor-ohms cancels out the resistor making the
+      circuit behave like a temperature transducer.
+    default: 1
+
+  alpha-ppm-per-celsius:
+    description: |
+      Sometimes referred to as output gain, slope, or temperature coefficient.
+
+      alpha is expressed in parts per million which can be micro-amps per
+      degrees Celsius or micro-volts per degrees Celsius. The is the main
+      characteristic of a temperature transducer and should be stated in the
+      datasheet.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - io-channels
+  - alpha-ppm-per-celsius
+
+examples:
+  - |
+    ad950: temperature-sensor-0 {
+        compatible = "temperature-transducer";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc 3>;
+
+        sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
+        sense-resistor-ohms = <8060>;
+        alpha-ppm-per-celsius = <1>; /* 1 uA/K */
+    };
+  - |
+    znq_tmp: temperature-sensor-1 {
+        compatible = "temperature-transducer";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc 2>;
+
+        sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
+        alpha-ppm-per-celsius = <4000>; /* 4 mV/K */
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt b/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
deleted file mode 100644
index b452a8406107..000000000000
--- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Voltage divider
-===============
-
-When an io-channel measures the midpoint of a voltage divider, the
-interesting voltage is often the voltage over the full resistance
-of the divider. This binding describes the voltage divider in such
-a curcuit.
-
-    Vin ----.
-            |
-         .-----.
-         |  R  |
-         '-----'
-            |
-            +---- Vout
-            |
-         .-----.
-         | Rout|
-         '-----'
-            |
-           GND
-
-Required properties:
-- compatible : "voltage-divider"
-- io-channels : Channel node of a voltage io-channel measuring Vout.
-- output-ohms : Resistance Rout over which the output voltage is measured.
-	        See full-ohms.
-- full-ohms : Resistance R + Rout for the full divider. The io-channel
-	      is scaled by the Rout / (R + Rout) quotient.
-
-Example:
-The system voltage is circa 12V, but divided down with a 22/222
-voltage divider (R = 200 Ohms, Rout = 22 Ohms) and fed to an ADC.
-
-sysv {
-	compatible = "voltage-divider";
-	io-channels = <&maxadc 1>;
-
-	/* Scale the system voltage by 22/222 to fit the ADC range. */
-	output-ohms = <22>;
-	full-ohms = <222>; /* 200 + 22 */
-};
-
-&spi {
-	maxadc: adc@0 {
-		compatible = "maxim,max1027";
-		reg = <0>;
-		#io-channel-cells = <1>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <15 IRQ_TYPE_EDGE_RISING>;
-		spi-max-frequency = <1000000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
new file mode 100644
index 000000000000..df2589f214e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/voltage-divider.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Voltage divider
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  When an io-channel measures the midpoint of a voltage divider, the
+  interesting voltage is often the voltage over the full resistance
+  of the divider. This binding describes the voltage divider in such
+  a curcuit.
+
+    Vin ----.
+            |
+         .-----.
+         |  R  |
+         '-----'
+            |
+            +---- Vout
+            |
+         .-----.
+         | Rout|
+         '-----'
+            |
+           GND
+
+
+properties:
+  compatible:
+    const: voltage-divider
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  output-ohms:
+    description:
+      Resistance Rout over which the output voltage is measured. See full-ohms.
+
+  full-ohms:
+    description:
+      Resistance R + Rout for the full divider. The io-channel is scaled by
+      the Rout / (R + Rout) quotient.
+
+required:
+  - compatible
+  - io-channels
+  - output-ohms
+  - full-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    /*
+     * The system voltage is circa 12V, but divided down with a 22/222
+     * voltage divider (R = 200 Ohms, Rout = 22 Ohms) and fed to an ADC.
+     */
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        maxadc: adc@0 {
+            compatible = "maxim,max1027";
+            reg = <0>;
+            #io-channel-cells = <1>;
+            interrupt-parent = <&gpio5>;
+            interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+    sysv {
+        compatible = "voltage-divider";
+        io-channels = <&maxadc 1>;
+
+        /* Scale the system voltage by 22/222 to fit the ADC range. */
+        output-ohms = <22>;
+        full-ohms = <222>; /* 200 + 22 */
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
new file mode 100644
index 000000000000..c15da155d300
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/amplifiers/adi,ada4250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADA4250 Programmable Gain Instrumentation Amplifier
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  Precision Low Power, 110kHz, 26uA, Programmable Gain Instrumentation Amplifier.
+
+properties:
+  compatible:
+    enum:
+      - adi,ada4250
+
+  reg:
+    maxItems: 1
+
+  avdd-supply: true
+
+  adi,refbuf-enable:
+    description:
+      Enable internal buffer to drive the reference pin.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      amplifier@0 {
+        compatible = "adi,ada4250";
+        reg = <0>;
+        avdd-supply = <&avdd>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
new file mode 100644
index 000000000000..9fda56fa49c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HMC425A 6-bit Digital Step Attenuator
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Digital Step Attenuator IIO device with gpio interface.
+  HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
+  https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,hmc425a
+
+  vcc-supply: true
+
+  ctrl-gpios:
+    description:
+      Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
+      connected to the control pins V1-V6.
+    minItems: 6
+    maxItems: 6
+
+required:
+  - compatible
+  - ctrl-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    gpio_hmc425a: hmc425a {
+      compatible = "adi,hmc425a";
+      ctrl-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>,
+        <&gpio 39 GPIO_ACTIVE_HIGH>,
+        <&gpio 38 GPIO_ACTIVE_HIGH>,
+        <&gpio 37 GPIO_ACTIVE_HIGH>,
+        <&gpio 36 GPIO_ACTIVE_HIGH>,
+        <&gpio 35 GPIO_ACTIVE_HIGH>;
+      vcc-supply = <&foo>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml
new file mode 100644
index 000000000000..2155d3f5666c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/cdc/adi,ad7150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog device AD7150 and similar capacitance to digital convertors.
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7150
+      - adi,ad7151
+      - adi,ad7156
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  interrupts: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7150
+              - adi,ad7156
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad7151
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cdc@48 {
+            compatible = "adi,ad7150";
+            reg = <0x48>;
+            interrupts = <25 2>, <26 2>;
+            interrupt-parent = <&gpio>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
new file mode 100644
index 000000000000..a02036ef9e8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/cdc/adi,ad7746.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor
+
+  Specifications about the part can be found at:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7291.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7745
+      - adi,ad7746
+      - adi,ad7747
+
+  reg:
+    maxItems: 1
+
+  adi,excitation-vdd-permille:
+    description: |
+      Set VDD per mille to be used as the excitation voltage.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [125, 250, 375, 500]
+
+  adi,exca-output-en:
+    description: Enables the EXCA pin as the excitation output.
+    type: boolean
+
+  adi,exca-output-invert:
+    description: |
+      Inverts the excitation output in the EXCA pin.
+      Normally only one of the EXCX pins would be inverted, check the following
+      application notes for more details
+      https://www.analog.com/media/en/technical-documentation/application-notes/AN-1585.pdf
+    type: boolean
+
+  adi,excb-output-en:
+    description: Enables the EXCB pin as the excitation output.
+    type: boolean
+
+  adi,excb-output-invert:
+    description: Inverts the excitation output in the EXCB pin.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7746: cdc@48 {
+        compatible = "adi,ad7746";
+        reg = <0x48>;
+        adi,excitation-vdd-permille = <125>;
+
+        adi,exca-output-en;
+        adi,exca-output-invert;
+        adi,excb-output-en;
+        adi,excb-output-invert;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml b/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml
new file mode 100644
index 000000000000..52341c8bacd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/ams,ccs811.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS CCS811 VOC Sensor
+
+maintainers:
+  - Narcisa Vasile <narcisaanamaria12@gmail.com>
+
+description: |
+  Ultra-Low Power Digital Gas Sensor for Monitoring Indoor Air Quality.
+
+properties:
+  compatible:
+    enum:
+      - ams,ccs811
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the nRESET line. This is an active low
+                 input to CCS811.
+    maxItems: 1
+
+  wakeup-gpios:
+    description: GPIO connected to the nWAKE line. This is an active low
+                 input to CCS811.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      voc@5b {
+        compatible = "ams,ccs811";
+        reg = <0x5b>;
+        reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>;
+        wakeup-gpios = <&gpioa 12 GPIO_ACTIVE_LOW>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt
deleted file mode 100644
index f4320595b851..000000000000
--- a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Atlas Scientific EC-SM OEM sensor
-
-http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf
-
-Required properties:
-
-  - compatible: must be "atlas,ec-sm"
-  - reg: the I2C address of the sensor
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client
-  node bindings.
-
-Example:
-
-atlas@64 {
-	compatible = "atlas,ec-sm";
-	reg = <0x64>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 2>;
-};
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
deleted file mode 100644
index af1f5a9aa4da..000000000000
--- a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Atlas Scientific ORP-SM OEM sensor
-
-https://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf
-
-Required properties:
-
-  - compatible: must be "atlas,orp-sm"
-  - reg: the I2C address of the sensor
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client
-  node bindings.
-
-Example:
-
-atlas@66 {
-	compatible = "atlas,orp-sm";
-	reg = <0x66>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 2>;
-};
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt
deleted file mode 100644
index 79d90f060327..000000000000
--- a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Atlas Scientific pH-SM OEM sensor
-
-http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf
-
-Required properties:
-
-  - compatible: must be "atlas,ph-sm"
-  - reg: the I2C address of the sensor
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client
-  node bindings.
-
-Example:
-
-atlas@65 {
-	compatible = "atlas,ph-sm";
-	reg = <0x65>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 2>;
-};
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml
new file mode 100644
index 000000000000..4646deeb6f7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/atlas,sensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atlas Scientific OEM + EZO sensors
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description: |
+  Atlas Scientific OEM + EZO sensors connected via I2C
+
+  Datasheets:
+    http://www.atlas-scientific.com/_files/_datasheets/_oem/DO_oem_datasheet.pdf
+    http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf
+    http://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf
+    http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf
+    http://www.atlas-scientific.com/_files/_datasheets/_oem/RTD_oem_datasheet.pdf
+    http://www.atlas-scientific.com/_files/_datasheets/_probe/EZO_CO2_Datasheet.pdf
+    https://www.atlas-scientific.com/files/EZO_O2_datasheet.pdf
+    https://www.atlas-scientific.com/files/EZO_HUM_Datasheet.pdf
+
+properties:
+  compatible:
+    enum:
+      - atlas,do-sm
+      - atlas,ec-sm
+      - atlas,orp-sm
+      - atlas,ph-sm
+      - atlas,rtd-sm
+      - atlas,co2-ezo
+      - atlas,o2-ezo
+      - atlas,hum-ezo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      atlas@66 {
+        compatible = "atlas,orp-sm";
+        reg = <0x66>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
deleted file mode 100644
index 7f3827cfb2ff..000000000000
--- a/Documentation/devicetree/bindings/iio/chemical/bme680.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors
-
-Required properties:
-- compatible: must be "bosch,bme680"
-
-Example:
-
-bme680@76 {
-          compatible = "bosch,bme680";
-          reg = <0x76>;
-};
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
index 19e53930ebf6..1fe561574019 100644
--- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
@@ -38,6 +38,8 @@ required:
   - compatible
   - vcc-supply
 
+additionalProperties: false
+
 examples:
   - |
     serial {
diff --git a/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml b/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
new file mode 100644
index 000000000000..337fe09e4bb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/senseair,sunrise.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Senseair Sunrise 006-0-0007 CO2 Sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+  Senseair Sunrise 006-0-0007 is a NDIR CO2 sensor. It supports I2C or UART buses
+  for communications and control.
+
+  Datasheets:
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/PSP11704.pdf
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/PSH11649.pdf
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/TDE5531.pdf
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Market/publicerat/TDE7318.pdf
+
+properties:
+  compatible:
+    const: senseair,sunrise-006-0-0007
+
+  reg:
+    maxItems: 1
+
+  ndry-gpios:
+    maxItems: 1
+    description:
+      Phandle to the GPIO line connected to the nDRY pin. Typically active low.
+
+  en-gpios:
+    maxItems: 1
+    description:
+      Phandle to the GPIO line connected to the EN pin. Typically active high.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      co2-sensor@68 {
+        compatible = "senseair,sunrise-006-0-0007";
+        reg = <0x68>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
new file mode 100644
index 000000000000..40d87346ff4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SCD30 carbon dioxide sensor
+
+maintainers:
+  - Tomasz Duszynski <tomasz.duszynski@octakon.com>
+
+description: |
+  Air quality sensor capable of measuring co2 concentration, temperature
+  and relative humidity.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,scd30
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  sensirion,sel-gpios:
+    description: GPIO connected to the SEL line
+    maxItems: 1
+
+  sensirion,pwm-gpios:
+    description: GPIO connected to the PWM line
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      co2-sensor@61 {
+        compatible = "sensirion,scd30";
+        reg = <0x61>;
+        vdd-supply = <&vdd>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    serial {
+      co2-sensor {
+        compatible = "sensirion,scd30";
+        vdd-supply = <&vdd>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd4x.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd4x.yaml
new file mode 100644
index 000000000000..798f48d05279
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd4x.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd4x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SCD4X carbon dioxide sensor
+
+maintainers:
+  - Roan van Dijk <roan@protonic.nl>
+
+description: |
+  Air quality sensor capable of measuring co2 concentration, temperature
+  and relative humidity.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,scd40
+      - sensirion,scd41
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      co2-sensor@62 {
+        compatible = "sensirion,scd41";
+        reg = <0x62>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt b/Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt
deleted file mode 100644
index 5844ed58173c..000000000000
--- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* Sensirion SGP30/SGPC3 multi-pixel Gas Sensor
-
-Required properties:
-
-  - compatible: must be one of
-    "sensirion,sgp30"
-    "sensirion,sgpc3"
-  - reg: the I2C address of the sensor
-
-Example:
-
-gas@58 {
-	compatible = "sensirion,sgp30";
-	reg = <0x58>;
-};
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
index 50a50a0d7070..967500b7e773 100644
--- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
@@ -22,7 +22,8 @@ properties:
 
 required:
   - compatible
-  - reg
+
+additionalProperties: false
 
 examples:
   - |
@@ -35,5 +36,11 @@ examples:
         reg = <0x69>;
       };
     };
+  - |
+    serial {
+      air-pollution-sensor {
+        compatible = "sensirion,sps30";
+      };
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml
new file mode 100644
index 000000000000..f845b41d74c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/common.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for iio sensors
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+  - Guido Günther <agx@sigxcpu.org>
+
+description: |
+  This document defines device tree properties common to several iio
+  sensors. It doesn't constitue a device tree binding specification by itself but
+  is meant to be referenced by device tree bindings.
+
+  When referenced from sensor tree bindings the properties defined in this
+  document are defined as follows. The sensor tree bindings are responsible for
+  defining whether each property is required or optional.
+
+properties:
+  proximity-near-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      For proximity sensors whether an object can be considered near to the
+      device depends on parameters like sensor position, covering glass and
+      aperture. This value gives an indication to userspace for which
+      sensor readings this is the case.
+
+      Raw proximity values equal or above this level should be
+      considered 'near' to the device (an object is near to the
+      sensor).
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ad5592r.txt b/Documentation/devicetree/bindings/iio/dac/ad5592r.txt
deleted file mode 100644
index 989f96f31c66..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ad5592r.txt
+++ /dev/null
@@ -1,155 +0,0 @@
-Analog Devices AD5592R/AD5593R DAC/ADC device driver
-
-Required properties for the AD5592R:
-	- compatible: Must be "adi,ad5592r"
-	- reg: SPI chip select number for the device
-	- spi-max-frequency: Max SPI frequency to use (< 30000000)
-	- spi-cpol: The AD5592R requires inverse clock polarity (CPOL) mode
-
-Required properties for the AD5593R:
-	- compatible: Must be "adi,ad5593r"
-	- reg: I2C address of the device
-
-Required properties for all supported chips:
-	- #address-cells: Should be 1.
-	- #size-cells: Should be 0.
-	- channel nodes:
-	  Each child node represents one channel and has the following
-	  Required properties:
-		* reg: Pin on which this channel is connected to.
-		* adi,mode: Mode or function of this channel.
-			    Macros specifying the valid values
-			    can be found in <dt-bindings/iio/adi,ad5592r.h>.
-
-			    The following values are currently supported:
-				* CH_MODE_UNUSED (the pin is unused)
-				* CH_MODE_ADC (the pin is ADC input)
-				* CH_MODE_DAC (the pin is DAC output)
-				* CH_MODE_DAC_AND_ADC (the pin is DAC output
-					but can be monitored by an ADC, since
-					there is no disadvantage this
-					this should be considered as the
-					preferred DAC mode)
-				* CH_MODE_GPIO (the pin is registered
-					with GPIOLIB)
-	 Optional properties:
-		* adi,off-state: State of this channel when unused or the
-				 device gets removed. Macros specifying the
-				 valid values can be found in
-				 <dt-bindings/iio/adi,ad5592r.h>.
-
-				* CH_OFFSTATE_PULLDOWN (the pin is pulled down)
-				* CH_OFFSTATE_OUT_LOW  (the pin is output low)
-				* CH_OFFSTATE_OUT_HIGH (the pin is output high)
-				* CH_OFFSTATE_OUT_TRISTATE (the pin is
-					tristated output)
-
-
-Optional properties:
-	- vref-supply: Phandle to the external reference voltage supply. This should
-	  only be set if there is an external reference voltage connected to the VREF
-	  pin. If the property is not set the internal 2.5V reference is used.
-	- reset-gpios : GPIO spec for the RESET pin. If specified, it will be
-	  asserted during driver probe.
-	- gpio-controller: Marks the device node as a GPIO controller.
-	- #gpio-cells: Should be 2. The first cell is the GPIO number and the second
-	  cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
-
-AD5592R Example:
-
-	#include <dt-bindings/iio/adi,ad5592r.h>
-
-	vref: regulator-vref {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-ad559x";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	ad5592r@0 {
-		#size-cells = <0>;
-		#address-cells = <1>;
-		#gpio-cells = <2>;
-		compatible = "adi,ad5592r";
-		reg = <0>;
-
-		spi-max-frequency = <1000000>;
-		spi-cpol;
-
-		vref-supply = <&vref>; /* optional */
-		reset-gpios = <&gpio0 86 0>;  /* optional */
-		gpio-controller;
-
-		channel@0 {
-			reg = <0>;
-			adi,mode = <CH_MODE_DAC>;
-		};
-		channel@1 {
-			reg = <1>;
-			adi,mode = <CH_MODE_ADC>;
-		};
-		channel@2 {
-			reg = <2>;
-			adi,mode = <CH_MODE_DAC_AND_ADC>;
-		};
-		channel@3 {
-			reg = <3>;
-			adi,mode = <CH_MODE_DAC_AND_ADC>;
-			adi,off-state = <CH_OFFSTATE_PULLDOWN>;
-		};
-		channel@4 {
-			reg = <4>;
-			adi,mode = <CH_MODE_UNUSED>;
-			adi,off-state = <CH_OFFSTATE_PULLDOWN>;
-		};
-		channel@5 {
-			reg = <5>;
-			adi,mode = <CH_MODE_GPIO>;
-			adi,off-state = <CH_OFFSTATE_PULLDOWN>;
-		};
-		channel@6 {
-			reg = <6>;
-			adi,mode = <CH_MODE_GPIO>;
-			adi,off-state = <CH_OFFSTATE_PULLDOWN>;
-		};
-		channel@7 {
-			reg = <7>;
-			adi,mode = <CH_MODE_GPIO>;
-			adi,off-state = <CH_OFFSTATE_PULLDOWN>;
-		};
-	};
-
-AD5593R Example:
-
-	#include <dt-bindings/iio/adi,ad5592r.h>
-
-	ad5593r@10 {
-		#size-cells = <0>;
-		#address-cells = <1>;
-		#gpio-cells = <2>;
-		compatible = "adi,ad5593r";
-		reg = <0x10>;
-		gpio-controller;
-
-		channel@0 {
-			reg = <0>;
-			adi,mode = <CH_MODE_DAC>;
-			adi,off-state = <CH_OFFSTATE_PULLDOWN>;
-		};
-		channel@1 {
-			reg = <1>;
-			adi,mode = <CH_MODE_ADC>;
-			adi,off-state = <CH_OFFSTATE_PULLDOWN>;
-		};
-		channel@2 {
-			reg = <2>;
-			adi,mode = <CH_MODE_DAC_AND_ADC>;
-			adi,off-state = <CH_OFFSTATE_PULLDOWN>;
-		};
-		channel@6 {
-			reg = <6>;
-			adi,mode = <CH_MODE_GPIO>;
-			adi,off-state = <CH_OFFSTATE_PULLDOWN>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
deleted file mode 100644
index f0bbd7e1029b..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ad5755.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver
-
-Required properties:
- - compatible: Has to contain one of the following:
-	adi,ad5755
-	adi,ad5755-1
-	adi,ad5757
-	adi,ad5735
-	adi,ad5737
-
- - reg: spi chip select number for the device
- - spi-cpha or spi-cpol: is the only modes that is supported
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Optional properties:
-See include/dt-bindings/iio/ad5755.h
- - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an
-					 external resistor and thereby bypasses
-					 the internal compensation resistor.
- - adi,dc-dc-phase:
-	Valid values for DC DC Phase control is:
-	0: All dc-to-dc converters clock on the same edge.
-	1: Channel A and Channel B clock on the same edge,
-	   Channel C and Channel D clock on opposite edges.
-	2: Channel A and Channel C clock on the same edge,
-	   Channel B and Channel D clock on opposite edges.
-	3: Channel A, Channel B, Channel C, and Channel D
-	   clock 90 degrees out of phase from each other.
- - adi,dc-dc-freq-hz:
-	Valid values for DC DC frequency is [Hz]:
-	250000
-	410000
-	650000
- - adi,dc-dc-max-microvolt:
-	Valid values for the maximum allowed Vboost voltage supplied by
-	the dc-to-dc converter is:
-	23000000
-	24500000
-	27000000
-	29500000
-
-Optional for every channel:
- - adi,mode:
-	Valid values for DAC modes is:
-	0: 0 V to 5 V voltage range.
-	1: 0 V to 10 V voltage range.
-	2: Plus minus 5 V voltage range.
-	3: Plus minus 10 V voltage range.
-	4: 4 mA to 20 mA current range.
-	5: 0 mA to 20 mA current range.
-	6: 0 mA to 24 mA current range.
- - adi,ext-current-sense-resistor: boolean set if the hardware a external
-				   current sense resistor.
- - adi,enable-voltage-overrange: boolean enable voltage overrange
- - adi,slew: Array of slewrate settings should contain 3 fields:
-	1: Should be either 0 or 1 in order to enable or disable slewrate.
-	2: Slew rate settings:
-		Valid values for the slew rate update frequency:
-		64000
-		32000
-		16000
-		8000
-		4000
-		2000
-		1000
-		500
-		250
-		125
-		64
-		32
-		16
-		8
-		4
-		0
-	3: Slew step size:
-		Valid values for the step size LSBs:
-		1
-		2
-		4
-		16
-		32
-		64
-		128
-		256
-
-Example:
-dac@0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "adi,ad5755";
-	reg = <0>;
-	spi-max-frequency = <1000000>;
-	spi-cpha;
-	adi,dc-dc-phase = <0>;
-	adi,dc-dc-freq-hz = <410000>;
-	adi,dc-dc-max-microvolt = <23000000>;
-	channel@0 {
-		reg = <0>;
-		adi,mode = <4>;
-		adi,ext-current-sense-resistor;
-		adi,slew = <0 64000 1>;
-	};
-	channel@1 {
-		reg = <1>;
-		adi,mode = <4>;
-		adi,ext-current-sense-resistor;
-		adi,slew = <0 64000 1>;
-	};
-	channel@2 {
-		reg = <2>;
-		adi,mode = <4>;
-		adi,ext-current-sense-resistor;
-		adi,slew = <0 64000 1>;
-	};
-	channel@3 {
-		reg = <3>;
-		adi,mode = <4>;
-		adi,ext-current-sense-resistor;
-		adi,slew = <0 64000 1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/iio/dac/ad5758.txt b/Documentation/devicetree/bindings/iio/dac/ad5758.txt
deleted file mode 100644
index 2f607f41f9d3..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ad5758.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Analog Devices AD5758 DAC device driver
-
-Required properties for the AD5758:
-	- compatible: Must be "adi,ad5758"
-	- reg: SPI chip select number for the device
-	- spi-max-frequency: Max SPI frequency to use (< 50000000)
-	- spi-cpha: is the only mode that is supported
-
-Required properties:
-
- - adi,dc-dc-mode: Mode of operation of the dc-to-dc converter
-		   Dynamic Power Control (DPC)
-		   In this mode, the AD5758 circuitry senses the output
-		   voltage and dynamically regulates the supply voltage,
-		   VDPC+, to meet compliance requirements plus an optimized
-		   headroom voltage for the output buffer.
-
-		   Programmable Power Control (PPC)
-		   In this mode, the VDPC+ voltage is user-programmable to
-		   a fixed level that needs to accommodate the maximum output
-		   load required.
-
-		   The output of the DAC core is either converted to a
-		   current or voltage output at the VIOUT pin. Only one mode
-		   can be enabled at any one time.
-
-		   The following values are currently supported:
-			* 1: DPC current mode
-			* 2: DPC voltage mode
-			* 3: PPC current mode
-
- Depending on the selected output mode (voltage or current) one of the
- two properties must
- be present:
-
- - adi,range-microvolt: Voltage output range
-		The array of voltage output ranges must contain two fields:
-		* <0 5000000>: 0 V to 5 V voltage range
-		* <0 10000000>: 0 V to 10 V voltage range
-		* <(-5000000) 5000000>: ±5 V voltage range
-		* <(-10000000) 10000000>: ±10 V voltage range
- - adi,range-microamp: Current output range
-		The array of current output ranges must contain two fields:
-		* <0 20000>: 0 mA to 20 mA current range
-		* <0 24000>: 0 mA to 24 mA current range
-		* <4 24000>: 4 mA to 20 mA current range
-		* <(-20000) 20000>: ±20 mA current range
-		* <(-24000) 24000>: ±24 mA current range
-		* <(-1000) 22000>: −1 mA to +22 mA current range
-
-Optional properties:
-
- - reset-gpios : GPIO spec for the RESET pin. If specified, it will be
-		 asserted during driver probe.
-
- - adi,dc-dc-ilim-microamp: The dc-to-dc converter current limit
-		   The following values are currently supported [uA]:
-			* 150000
-			* 200000
-			* 250000
-			* 300000
-			* 350000
-			* 400000
-
- - adi,slew-time-us: The time it takes for the output to reach the
- full scale [uS]
-		     The supported range is between 133us up to 1023984375us
-
-AD5758 Example:
-
-	dac@0 {
-		compatible = "adi,ad5758";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		spi-cpha;
-
-		reset-gpios = <&gpio 22 0>;
-
-		adi,dc-dc-mode = <2>;
-		adi,range-microvolt = <0 10000000>;
-		adi,dc-dc-ilim-microamp = <200000>;
-		adi,slew-time-us = <125000>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/dac/ad7303.txt b/Documentation/devicetree/bindings/iio/dac/ad7303.txt
deleted file mode 100644
index 914610f0556e..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ad7303.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Analog Devices AD7303 DAC device driver
-
-Required properties:
-	- compatible: Must be "adi,ad7303"
-	- reg: SPI chip select number for the device
-	- spi-max-frequency: Max SPI frequency to use (< 30000000)
-	- Vdd-supply: Phandle to the Vdd power supply
-
-Optional properties:
-	- REF-supply: Phandle to the external reference voltage supply. This should
-	  only be set if there is an external reference voltage connected to the REF
-	  pin. If the property is not set Vdd/2 is used as the reference voltage.
-
-Example:
-
-		ad7303@4 {
-			compatible = "adi,ad7303";
-			reg = <4>;
-			spi-max-frequency = <10000000>;
-			Vdd-supply = <&vdd_supply>;
-			adi,use-external-reference;
-			REF-supply = <&vref_supply>;
-		};
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
new file mode 100644
index 000000000000..fee0f023a8c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD2552R DAC device driver
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD3552R DAC device and similar.
+  Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad3542r
+      - adi,ad3552r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 30000000
+
+  reset-gpios:
+    maxItems: 1
+
+  ldac-gpios:
+    description: |
+      LDAC pin to be used as a hardware trigger to update the DAC channels.
+    maxItems: 1
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exists the
+      internal reference will be used. External reference must be 2.5V
+
+  adi,vref-out-en:
+    description: Vref I/O driven by internal vref to 2.5V. If not set, Vref pin
+      will be floating.
+    type: boolean
+
+  adi,sdo-drive-strength:
+    description: |
+      Configure SDIO0 and SDIO1 strength levels:
+        - 0: low SDO drive strength.
+        - 1: medium low SDO drive strength.
+        - 2: medium high SDO drive strength.
+        - 3: high SDO drive strength
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-1])$":
+    type: object
+    description: Configurations of the DAC Channels
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: Channel number
+        enum: [0, 1]
+
+      adi,output-range-microvolt: true
+
+      custom-output-range-config:
+        type: object
+        additionalProperties: false
+        description: Configuration of custom range when
+          adi,output-range-microvolt is not present.
+          The formulas for calculation the output voltages are
+            Vout_fs = 2.5 + [(GainN + Offset/1024) * 2.5 * Rfbx * 1.03]
+            Vout_zs = 2.5 - [(GainP + Offset/1024) * 2.5 * Rfbx * 1.03]
+
+        properties:
+          adi,gain-offset:
+            description: Gain offset used in the above formula
+            $ref: /schemas/types.yaml#/definitions/int32
+            maximum: 511
+            minimum: -511
+
+          adi,gain-scaling-p-inv-log2:
+            description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,gain-scaling-n-inv-log2:
+            description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,rfb-ohms:
+            description: Feedback Resistor
+
+        required:
+          - adi,gain-offset
+          - adi,gain-scaling-p-inv-log2
+          - adi,gain-scaling-n-inv-log2
+          - adi,rfb-ohms
+
+    required:
+      - reg
+
+    oneOf:
+      # If adi,output-range-microvolt is missing,
+      # custom-output-range-config must be used
+      - required:
+          - adi,output-range-microvolt
+
+      - required:
+          - custom-output-range-config
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad3542r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V;
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 3000000, 5000000, 10000000]
+                - items:
+                    - const: -2500000
+                    - const: 7500000
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+
+          required:
+            - adi,output-range-microvolt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad3552r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; -5 to 5 V;
+                  Rfb4x for: -10 to 10V
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 5000000, 10000000]
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+                - items:
+                    - const: -10000000
+                    - const: 10000000
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ad3552r@0 {
+              compatible = "adi,ad3552r";
+              reg = <0>;
+              spi-max-frequency = <20000000>;
+              #address-cells = <1>;
+              #size-cells = <0>;
+              channel@0 {
+                      reg = <0>;
+                      adi,output-range-microvolt = <0 10000000>;
+              };
+              channel@1 {
+                      reg = <1>;
+                      custom-output-range-config {
+                              adi,gain-offset = <5>;
+                              adi,gain-scaling-p-inv-log2 = <1>;
+                              adi,gain-scaling-n-inv-log2 = <2>;
+                              adi,rfb-ohms = <1>;
+                      };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
new file mode 100644
index 000000000000..c04165fa9259
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5064 and similar DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+   A range of similar DAC devices with between 1 and 12 channels. Some parts
+   have internal references, others require a single shared external reference
+   and the remainder have a separate reference pin for each DAC.
+
+properties:
+  compatible:
+    oneOf:
+      - description: I2C devics
+        enum:
+          - adi,ad5024
+          - adi,ad5025
+          - adi,ad5044
+          - adi,ad5045
+          - adi,ad5064
+          - adi,ad5064-1
+          - adi,ad5065
+          - adi,ad5628-1
+          - adi,ad5628-2
+          - adi,ad5648-1
+          - adi,ad5648-2
+          - adi,ad5666-1
+          - adi,ad5666-2
+          - adi,ad5668-1
+          - adi,ad5668-2
+          - adi,ad5668-3
+      - description: SPI devices
+        enum:
+          - adi,ad5625
+          - adi,ad5625r-1v25
+          - adi,ad5625r-2v5
+          - adi,ad5627
+          - adi,ad5627r-1v25
+          - adi,ad5627r-2v5
+          - adi,ad5629-1
+          - adi,ad5629-2
+          - adi,ad5629-3
+          - adi,ad5645r-1v25
+          - adi,ad5645r-2v5
+          - adi,ad5665
+          - adi,ad5665r-1v25
+          - adi,ad5665r-2v5
+          - adi,ad5667
+          - adi,ad5667r-1v25
+          - adi,ad5667r-2v5
+          - adi,ad5669-1
+          - adi,ad5669-2
+          - adi,ad5669-3
+          - lltc,ltc2606
+          - lltc,ltc2607
+          - lltc,ltc2609
+          - lltc,ltc2616
+          - lltc,ltc2617
+          - lltc,ltc2619
+          - lltc,ltc2626
+          - lltc,ltc2627
+          - lltc,ltc2629
+          - lltc,ltc2631-l12
+          - lltc,ltc2631-h12
+          - lltc,ltc2631-l10
+          - lltc,ltc2631-h10
+          - lltc,ltc2631-l8
+          - lltc,ltc2631-h8
+          - lltc,ltc2633-l12
+          - lltc,ltc2633-h12
+          - lltc,ltc2633-l10
+          - lltc,ltc2633-h10
+          - lltc,ltc2633-l8
+          - lltc,ltc2633-h8
+          - lltc,ltc2635-l12
+          - lltc,ltc2635-h12
+          - lltc,ltc2635-l10
+          - lltc,ltc2635-h10
+          - lltc,ltc2635-l8
+          - lltc,ltc2635-h8
+
+  reg:
+    maxItems: 1
+
+  vrefA-supply: true
+  vrefB-supply: true
+  vrefC-supply: true
+  vrefD-supply: true
+  vref-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - # Shared external vref, no internal reference
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5064-1
+              - adi,ad5625
+              - adi,ad5627
+              - adi,ad5665
+              - adi,ad5667
+              - lltc,ltc2606
+              - lltc,ltc2607
+              - lltc,ltc2616
+              - lltc,ltc2617
+              - lltc,ltc2626
+              - lltc,ltc2627
+    then:
+      properties:
+        vref-supply: true
+        vrefA-supply: false
+        vrefB-supply: false
+        vrefC-supply: false
+        vrefD-supply: false
+      required:
+        - vref-supply
+  - # Shared external vref, internal reference available
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5625r-1v25
+              - adi,ad5625r-2v5
+              - adi,ad5627r-1v25
+              - adi,ad5627r-2v5
+              - adi,ad5628-1
+              - adi,ad5628-2
+              - adi,ad5629-1
+              - adi,ad5629-2
+              - adi,ad5629-3
+              - adi,ad5645r-1v25
+              - adi,ad5645r-2v5
+              - adi,ad5647r-1v25
+              - adi,ad5647r-2v5
+              - adi,ad5648-1
+              - adi,ad5648-2
+              - adi,ad5665r-1v25
+              - adi,ad5665r-2v5
+              - adi,ad5666-1
+              - adi,ad5666-2
+              - adi,ad5667r-1v25
+              - adi,ad5667r-2v5
+              - adi,ad5668-1
+              - adi,ad5668-2
+              - adi,ad5668-3
+              - adi,ad5669-1
+              - adi,ad5669-2
+              - adi,ad5669-3
+              - lltc,ltc2631-l12
+              - lltc,ltc2631-h12
+              - lltc,ltc2631-l10
+              - lltc,ltc2631-h10
+              - lltc,ltc2631-l8
+              - lltc,ltc2631-h8
+              - lltc,ltc2633-l12
+              - lltc,ltc2633-h12
+              - lltc,ltc2633-l10
+              - lltc,ltc2633-h10
+              - lltc,ltc2633-l8
+              - lltc,ltc2633-h8
+              - lltc,ltc2635-l12
+              - lltc,ltc2635-h12
+              - lltc,ltc2635-l10
+              - lltc,ltc2635-h10
+              - lltc,ltc2635-l8
+              - lltc,ltc2635-h8
+    then:
+      properties:
+        vref-supply: true
+        vrefA-supply: false
+        vrefB-supply: false
+        vrefC-supply: false
+        vrefD-supply: false
+  - # 4 input devices, separate vrefs, no internal reference
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5024
+              - adi,ad5044
+              - adi,ad5064
+              - lltc,ltc2609
+              - lltc,ltc2619
+              - lltc,ltc2629
+    then:
+      properties:
+        vrefA-supply: true
+        vrefB-supply: true
+        vrefC-supply: true
+        vrefD-supply: true
+        vref-supply: false
+      required:
+        - vrefA-supply
+        - vrefB-supply
+        - vrefC-supply
+        - vrefD-supply
+  - # 2 input devices, separate vrefs, no internal reference
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5025
+              - adi,ad5045
+              - adi,ad5065
+    then:
+      properties:
+        vrefA-supply: true
+        vrefB-supply: true
+        vrefC-supply: false
+        vrefD-supply: false
+        vref-supply: false
+      required:
+        - vrefA-supply
+        - vrefB-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5625";
+            vref-supply = <&dac_vref>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5625r-1v25";
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@42 {
+            reg = <0x42>;
+            compatible = "adi,ad5024";
+            vrefA-supply = <&dac_vref>;
+            vrefB-supply = <&dac_vref>;
+            vrefC-supply = <&dac_vref2>;
+            vrefD-supply = <&dac_vref2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
new file mode 100644
index 000000000000..86e2884cdfb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5360 and similar DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5360
+      - adi,ad5361
+      - adi,ad5363
+      - adi,ad5370
+      - adi,ad5371
+      - adi,ad5372
+      - adi,ad5373
+
+  reg:
+    maxItems: 1
+
+  vref0-supply: true
+  vref1-supply: true
+  vref2-supply: true
+
+required:
+  - compatible
+  - reg
+  - vref0-supply
+  - vref1-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5360
+              - adi,ad5361
+              - adi,ad5363
+              - adi,ad5370
+              - adi,ad5372
+              - adi,ad5373
+    then:
+      properties:
+        vref2-supply: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5371
+    then:
+      required:
+        - vref2-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5371";
+            vref0-supply = <&dac_vref0>;
+            vref1-supply = <&dac_vref1>;
+            vref2-supply = <&dac_vref2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
new file mode 100644
index 000000000000..ff50c72c62b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5380 and similar DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  DAC devices supporting both SPI and I2C interfaces.
+properties:
+  compatible:
+    enum:
+      - adi,ad5380-3
+      - adi,ad5380-5
+      - adi,ad5381-3
+      - adi,ad5381-5
+      - adi,ad5382-3
+      - adi,ad5382-5
+      - adi,ad5383-3
+      - adi,ad5383-5
+      - adi,ad5384-3
+      - adi,ad5384-5
+      - adi,ad5390-3
+      - adi,ad5390-5
+      - adi,ad5391-3
+      - adi,ad5391-5
+      - adi,ad5392-3
+      - adi,ad5392-5
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      If not supplied devices will use internal regulators.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+           reg = <0>;
+           compatible = "adi,ad5390-5";
+           vref-supply = <&dacvref>;
+        };
+    };
+  - |
+    i2c {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       dac@42 {
+          reg = <0x42>;
+          compatible = "adi,ad5380-3";
+       };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
new file mode 100644
index 000000000000..52d089ebde95
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5421.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5421 DAC
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  AD5421 is designed for us in loop-powered, 4 mA to 20 mA smart transmitter
+  applications. It provides a 16-bit DAC, current amplifier, voltage regulator
+  to drive the loop and a voltage reference.
+
+properties:
+  compatible:
+    const: adi,ad5421
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Fault signal.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5421";
+            reg = <0>;
+            spi-max-frequency = <30000000>;
+            interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
new file mode 100644
index 000000000000..d2af2d491986
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5449.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5449 and similar DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Family of multiplying DACs from Analog Devices
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5415
+      - adi,ad5426
+      - adi,ad5429
+      - adi,ad5432
+      - adi,ad5439
+      - adi,ad5443
+      - adi,ad5449
+
+  reg:
+    maxItems: 1
+
+  VREF-supply: true
+  VREFA-supply: true
+  VREFB-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5415
+              - adi,ad5426
+              - adi,ad5432
+    then:
+      properties:
+        VREF-supply: true
+        VREFA-supply: false
+        VREFB-supply: false
+      required:
+        - VREF-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5429
+              - adi,ad5439
+              - adi,ad5449
+    then:
+      properties:
+        VREF-supply: false
+        VREFA-supply: true
+        VREFB-supply: true
+      required:
+        - VREFA-supply
+        - VREFB-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5415";
+            VREF-supply = <&dac_ref>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5429";
+            VREFA-supply = <&dac_refA>;
+            VREFB-supply = <&dac_refB>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml
new file mode 100644
index 000000000000..9c2c038683b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5504.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5501 and AD5504 DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  High voltage (up to 60V) DACs with temperature sensor alarm function
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5501
+      - adi,ad5504
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Used for temperature alarm.
+    maxItems: 1
+
+  vcc-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5504";
+            vcc-supply = <&dac_vcc>;
+            interrupts = <55 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5592r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5592r.yaml
new file mode 100644
index 000000000000..30194880f457
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5592r.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5592r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5592R/AD5593R DAC/ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5592r
+      - adi,ad5593r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 30000000
+
+  spi-cpol: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+  vref-supply:
+    description: If not set internal 2.5V reference used.
+
+  reset-gpios:
+    maxItems: 1
+
+  gpio-controller:
+    description: Marks the device node as a GPIO controller.
+
+  "#gpio-cells":
+    const: 2
+    description:
+      The first cell is the GPIO number and the second cell specifies
+      GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad5592r
+    then:
+      required:
+        - spi-cpol
+    else:
+      properties:
+        spi-cpol: false
+
+additionalProperties: false
+
+patternProperties:
+  "^(channel@)[0-7]$":
+    type: object
+    description: Child node to describe a channel
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      adi,mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 8]
+        description: |
+          Mode or function of this channel.
+          Macros specifying the valid values can be found in
+          <dt-bindings/iio/adi,ad5592r.h>.
+
+          The following values are currently supported:
+          * CH_MODE_UNUSED (the pin is unused)
+          * CH_MODE_ADC (the pin is ADC input)
+          * CH_MODE_DAC (the pin is DAC output)
+          * CH_MODE_DAC_AND_ADC (the pin is DAC output but can be monitored
+            by an ADC, since there is no disadvantage this should be
+            considered as the preferred DAC mode)
+          * CH_MODE_GPIO (the pin is registered with GPIOLIB)
+
+      adi,off-state:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          State of this channel when unused or the device gets removed.
+          Macros specifying the  valid values can be found in
+          <dt-bindings/iio/adi,ad5592r.h>.
+          * CH_OFFSTATE_PULLDOWN (the pin is pulled down)
+          * CH_OFFSTATE_OUT_LOW  (the pin is output low)
+          * CH_OFFSTATE_OUT_HIGH (the pin is output high)
+          * CH_OFFSTATE_OUT_TRISTATE (the pin is tristated output)
+
+    required:
+      - reg
+      - adi,mode
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adi,ad5592r.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        addac@0 {
+            compatible = "adi,ad5592r";
+            #size-cells = <0>;
+            #address-cells = <1>;
+            #gpio-cells = <2>;
+            reg = <0>;
+
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+
+            vref-supply = <&vref>;
+            reset-gpios = <&gpio0 86 0>;
+            gpio-controller;
+
+            channel@0 {
+                reg = <0>;
+                adi,mode = <CH_MODE_DAC>;
+            };
+            channel@1 {
+                reg = <1>;
+                adi,mode = <CH_MODE_ADC>;
+            };
+            channel@2 {
+                reg = <2>;
+                adi,mode = <CH_MODE_DAC_AND_ADC>;
+            };
+            channel@3 {
+                reg = <3>;
+                adi,mode = <CH_MODE_DAC_AND_ADC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@4 {
+                reg = <4>;
+                adi,mode = <CH_MODE_UNUSED>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@5 {
+                reg = <5>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@6 {
+                reg = <6>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@7 {
+                reg = <7>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+        };
+        ad5593r@10 {
+            compatible = "adi,ad5593r";
+            #size-cells = <0>;
+            #address-cells = <1>;
+            #gpio-cells = <2>;
+            reg = <0x10>;
+            gpio-controller;
+
+            channel@0 {
+                reg = <0>;
+                adi,mode = <CH_MODE_DAC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@1 {
+                reg = <1>;
+                adi,mode = <CH_MODE_ADC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@2 {
+                reg = <2>;
+                adi,mode = <CH_MODE_DAC_AND_ADC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@6 {
+                reg = <6>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
new file mode 100644
index 000000000000..4d5111a5f9bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5624r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5624r and similar DACs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5624r3
+      - adi,ad5644r3
+      - adi,ad5664r3
+      - adi,ad5624r5
+      - adi,ad5644r5
+      - adi,ad5664r5
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: If not present, internal reference will be used.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5624r3";
+            vref-supply = <&vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
new file mode 100644
index 000000000000..13f214234b8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5360 and similar DACs
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - description: SPI devices
+        enum:
+          - adi,ad5310r
+          - adi,ad5672r
+          - adi,ad5674r
+          - adi,ad5676
+          - adi,ad5676r
+          - adi,ad5679r
+          - adi,ad5681r
+          - adi,ad5682r
+          - adi,ad5683
+          - adi,ad5683r
+          - adi,ad5684
+          - adi,ad5684r
+          - adi,ad5685r
+          - adi,ad5686
+          - adi,ad5686r
+      - description: I2C devices
+        enum:
+          - adi,ad5311r
+          - adi,ad5338r
+          - adi,ad5671r
+          - adi,ad5675r
+          - adi,ad5691r
+          - adi,ad5692r
+          - adi,ad5693
+          - adi,ad5693r
+          - adi,ad5694
+          - adi,ad5694r
+          - adi,ad5695r
+          - adi,ad5696
+          - adi,ad5696r
+
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: If not supplied the internal reference is used.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5310r";
+            vcc-supply = <&dac_vref0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml
new file mode 100644
index 000000000000..56b0cda0f30a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5696.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5696 and similar multi-channel DACs
+
+maintainers:
+  - Michael Auchter <michael.auchter@ni.com>
+
+description: |
+  Binding for Analog Devices AD5696 and similar multi-channel DACs
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5311r
+      - adi,ad5338r
+      - adi,ad5671r
+      - adi,ad5675r
+      - adi,ad5691r
+      - adi,ad5692r
+      - adi,ad5693
+      - adi,ad5693r
+      - adi,ad5694
+      - adi,ad5694r
+      - adi,ad5695r
+      - adi,ad5696
+      - adi,ad5696r
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: |
+      The regulator supply for DAC reference voltage.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad5696: dac@0 {
+        compatible = "adi,ad5696";
+        reg = <0>;
+        vcc-supply = <&dac_vref>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
new file mode 100644
index 000000000000..9a3c2926bf85
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5755.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5755 Multi-Channel DAC
+
+maintainers:
+  - Sean Nyekjaer <sean.nyekjaer@prevas.dk>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5755
+      - adi,ad5755-1
+      - adi,ad5757
+      - adi,ad5735
+      - adi,ad5737
+
+  reg:
+    maxItems: 1
+
+  spi-cpha:
+    description: Either this or spi-cpol but not both.
+  spi-cpol: true
+
+  adi,ext-dc-dc-compenstation-resistor:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if the hardware have an external resistor and thereby bypasses
+      the internal compensation resistor.
+
+  adi,dc-dc-phase:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Valid values for DC DC Phase control is:
+      0: All dc-to-dc converters clock on the same edge.
+      1: Channel A and Channel B clock on the same edge,
+         Channel C and Channel D clock on opposite edges.
+      2: Channel A and Channel C clock on the same edge,
+         Channel B and Channel D clock on opposite edges.
+      3: Channel A, Channel B, Channel C, and Channel D
+         clock 90 degrees out of phase from each other.
+
+  adi,dc-dc-freq-hz:
+    enum: [250000, 410000, 650000]
+
+  adi,dc-dc-max-microvolt:
+    description:
+      Maximum allowed Vboost voltage supplied by the dc-to-dc converter.
+    enum: [23000000, 24500000, 27000000, 29500000]
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^channel@[0-7]$":
+    type: object
+    description: Child node to describe a channel
+    properties:
+      reg:
+        maxItems: 1
+
+      adi,mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 6
+        description: |
+          Valid values for DAC modes is:
+          0: 0 V to 5 V voltage range.
+          1: 0 V to 10 V voltage range.
+          2: Plus minus 5 V voltage range.
+          3: Plus minus 10 V voltage range.
+          4: 4 mA to 20 mA current range.
+          5: 0 mA to 20 mA current range.
+          6: 0 mA to 24 mA current range.
+
+      adi,ext-current-sense-resistor:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Set if the hardware has an external current sense resistor
+
+      adi,enable-voltage-overrange:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: Enable voltage overrange
+
+      adi,slew:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: |
+          Array of slewrate settings should contain 3 fields:
+          1: Should be either 0 or 1 in order to enable or disable slewrate.
+          2: Slew rate update frequency
+          3: Slew step size
+        items:
+          - enum: [0, 1]
+          - enum: [64000, 32000, 16000, 8000, 4000, 2000, 1000, 500, 250, 125, 64, 32, 16, 8, 4, 0]
+          - enum: [1, 2, 4, 16, 32, 64, 128, 256]
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+oneOf:
+  - required:
+      - spi-cpha
+  - required:
+      - spi-cpol
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "adi,ad5755";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpha;
+            adi,dc-dc-phase = <0>;
+            adi,dc-dc-freq-hz = <410000>;
+            adi,dc-dc-max-microvolt = <23000000>;
+            channel@0 {
+                reg = <0>;
+                adi,mode = <4>;
+                adi,ext-current-sense-resistor;
+                adi,slew = <0 64000 1>;
+            };
+            channel@1 {
+                reg = <1>;
+                adi,mode = <4>;
+                adi,ext-current-sense-resistor;
+                adi,slew = <0 64000 1>;
+            };
+            channel@2 {
+                reg = <2>;
+                adi,mode = <4>;
+                adi,ext-current-sense-resistor;
+                adi,slew = <0 64000 1>;
+            };
+            channel@3 {
+                reg = <3>;
+                adi,mode = <4>;
+                adi,ext-current-sense-resistor;
+                adi,slew = <0 64000 1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
new file mode 100644
index 000000000000..e49e7556175d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5758.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5758 DAC
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+
+properties:
+  compatible:
+    const: adi,ad5758
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  adi,dc-dc-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+    description: |
+      Mode of operation of the dc-to-dc converter
+      Dynamic Power Control (DPC)
+      In this mode, the AD5758 circuitry senses the output voltage and
+      dynamically regulates the supply voltage, VDPC+, to meet compliance
+      requirements plus an optimized headroom voltage for the output buffer.
+
+      Programmable Power Control (PPC)
+      In this mode, the VDPC+ voltage is user-programmable to a fixed level
+      that needs to accommodate the maximum output load required.
+
+      The output of the DAC core is either converted to a current or
+      voltage output at the VIOUT pin. Only one mode can be enabled at
+      any one time.
+
+      The following values are currently supported:
+      * 1: DPC current mode
+      * 2: DPC voltage mode
+      * 3: PPC current mode
+
+      Depending on the selected output mode (voltage or current) one of the
+      two properties must be present:
+
+  adi,range-microvolt:
+    description: |
+      Voltage output range specified as <minimum, maximum>
+    oneOf:
+      - items:
+          - const: 0
+          - enum: [5000000, 10000000]
+      - items:
+          - const: -5000000
+          - const: 5000000
+      - items:
+          - const: -10000000
+          - const: 10000000
+
+  adi,range-microamp:
+    description: |
+      Current output range specified as <minimum, maximum>
+    oneOf:
+      - items:
+          - const: 0
+          - enum: [20000, 24000]
+      - items:
+          - const: 4
+          - const: 24000
+      - items:
+          - const: -20000
+          - const: 20000
+      - items:
+          - const: -24000
+          - const: 24000
+      - items:
+          - const: -1000
+          - const: 22000
+
+  reset-gpios: true
+
+  adi,dc-dc-ilim-microamp:
+    enum: [150000, 200000, 250000, 300000, 350000, 400000]
+    description: |
+      The dc-to-dc converter current limit.
+
+  adi,slew-time-us:
+    description: |
+      The time it takes for the output to reach the full scale [uS]
+    minimum: 133
+    maximum: 1023984375
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - adi,dc-dc-mode
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        adi,dc-dc-mode:
+          contains:
+            enum: [1, 3]
+    then:
+      properties:
+        adi,range-microvolt: false
+      required:
+        - adi,range-microamp
+    else:
+      properties:
+        adi,range-microamp: false
+      required:
+        - adi,range-microvolt
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5758";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpha;
+
+            reset-gpios = <&gpio 22 0>;
+
+            adi,dc-dc-mode = <2>;
+            adi,range-microvolt = <0 10000000>;
+            adi,dc-dc-ilim-microamp = <200000>;
+            adi,slew-time-us = <125000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
new file mode 100644
index 000000000000..df550b5af2f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5761.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5761 and similar DACs
+
+maintainers:
+  - Ricardo Ribalda <ribalda@kernel.org>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+
+  compatible:
+    enum:
+      - adi,ad5721
+      - adi,ad5721r
+      - adi,ad5761
+      - adi,ad5761r
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: If not supplied, internal reference will be used.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5721
+              - adi,ad5761
+    then:
+      required:
+        - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5721";
+            reg = <0>;
+            vref-supply = <&dac_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
new file mode 100644
index 000000000000..0b409a727a43
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5764.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5744 and AD5764 DAC families
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+
+  compatible:
+    enum:
+      - adi,ad5744
+      - adi,ad5744r
+      - adi,ad5764
+      - adi,ad5764r
+
+  reg:
+    maxItems: 1
+
+  vrefAB-supply: true
+  vrefCD-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5744
+              - adi,ad5764
+    then:
+      required:
+        - vrefAB-supply
+        - vrefCD-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5744";
+            reg = <0>;
+            vrefAB-supply = <&dac_vref>;
+            vrefCD-supply = <&dac_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
new file mode 100644
index 000000000000..29bd16dab546
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5766.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5766 DAC device driver
+
+maintainers:
+  - Cristian Pop <cristian.pop@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD5766 current DAC device. Datasheet can be
+  found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad5766-5767.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5766
+      - adi,ad5767
+
+  output-range-microvolts:
+    $ref: /schemas/types.yaml#/definitions/int32-array
+    maxItems: 2
+    description: Select converter output range.
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  spi-cpol: true
+
+  reset-gpios:
+    description: GPIO spec for the RESET pin. As the line is active low, it
+      should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+required:
+  - compatible
+  - output-range-microvolts
+  - reg
+  - spi-max-frequency
+  - spi-cpol
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          ad5766@0 {
+              compatible = "adi,ad5766";
+              output-range-microvolts = <(-5000000) 5000000>;
+              reg = <0>;
+              spi-cpol;
+              spi-max-frequency = <1000000>;
+              reset-gpios = <&gpio 22 0>;
+            };
+      };
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
new file mode 100644
index 000000000000..8e7da0de918f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5770r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5770R DAC device driver
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be
+  found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD5770R.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5770r
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      AVdd voltage supply. Represents two different supplies in the datasheet
+      that are in fact the same.
+
+  iovdd-supply:
+    description:
+      Voltage supply for the chip interface.
+
+  vref-supply:
+    description: Specify the voltage of the external reference used.
+      Available reference options are 1.25 V or 2.5 V. If no
+      external reference declared then the device will use the
+      internal reference of 1.25 V.
+
+  adi,external-resistor:
+    description: Specify if an external 2.5k ohm resistor is used. If not
+      specified the device will use an internal 2.5k ohm resistor.
+      The precision resistor is used for reference current generation.
+    type: boolean
+
+  reset-gpios:
+    description: GPIO spec for the RESET pin. If specified, it will be
+      asserted during driver probe.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  channel@0:
+    description: Represents an external channel which are
+      connected to the DAC. Channel 0 can act both as a current
+      source and sink.
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: This represents the channel number.
+        const: 0
+
+      adi,range-microamp:
+        description: Output range of the channel.
+        oneOf:
+          - items:
+              - const: 0
+              - const: 300000
+          - items:
+              - const: -60000
+              - const: 0
+          - items:
+              - const: -60000
+              - const: 300000
+
+  channel@1:
+    description: Represents an external channel which are
+      connected to the DAC.
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: This represents the channel number.
+        const: 1
+
+      adi,range-microamp:
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [140000, 250000]
+
+  channel@2:
+    description: Represents an external channel which are
+      connected to the DAC.
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: This represents the channel number.
+        const: 2
+
+      adi,range-microamp:
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [55000, 150000]
+
+patternProperties:
+  "^channel@([3-5])$":
+    type: object
+    additionalProperties: false
+    description: Represents the external channels which are connected to the DAC.
+    properties:
+      reg:
+        description: This represents the channel number.
+        minimum: 3
+        maximum: 5
+
+      adi,range-microamp:
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [45000, 100000]
+
+required:
+  - reg
+  - channel@0
+  - channel@1
+  - channel@2
+  - channel@3
+  - channel@4
+  - channel@5
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+        spi {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ad5770r@0 {
+                        compatible = "adi,ad5770r";
+                        reg = <0>;
+                        spi-max-frequency = <1000000>;
+                        vref-supply = <&vref>;
+                        adi,external-resistor;
+                        reset-gpios = <&gpio 22 0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        channel@0 {
+                                reg = <0>;
+                                adi,range-microamp = <0 300000>;
+                        };
+
+                        channel@1 {
+                                reg = <1>;
+                                adi,range-microamp = <0 140000>;
+                        };
+
+                        channel@2 {
+                                reg = <2>;
+                                adi,range-microamp = <0 55000>;
+                        };
+
+                        channel@3 {
+                                reg = <3>;
+                                adi,range-microamp = <0 45000>;
+                        };
+
+                        channel@4 {
+                                reg = <4>;
+                                adi,range-microamp = <0 45000>;
+                        };
+
+                        channel@5 {
+                                reg = <5>;
+                                adi,range-microamp = <0 45000>;
+                        };
+                };
+        };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
new file mode 100644
index 000000000000..3a84739736f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5791.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5791 and similar DACs
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+
+  compatible:
+    enum:
+      - adi,ad5760
+      - adi,ad5780
+      - adi,ad5781
+      - adi,ad5790
+      - adi,ad5791
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vss-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vss-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5791";
+            reg = <0>;
+            vss-supply = <&dac_vss>;
+            vdd-supply = <&dac_vdd>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
new file mode 100644
index 000000000000..5ee80bf6aa11
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad7293.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7293 12-Bit Power Amplifier Current Controller with ADC,
+       DACs, Temperature and Current Sensors
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Power Amplifier drain current controller containing functionality
+   for general-purpose monitoring and control of current, voltage,
+   and temperature, integrated into a single chip solution with an
+   SPI-compatible interface.
+
+   https://www.analog.com/en/products/ad7293.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7293
+
+  avdd-supply: true
+
+  vdrive-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vdrive-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ad7293@0 {
+        compatible = "adi,ad7293";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        avdd-supply = <&avdd>;
+        vdrive-supply = <&vdrive>;
+        reset-gpios = <&gpio 10 0>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad7303.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad7303.yaml
new file mode 100644
index 000000000000..1f0037152095
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad7303.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad7303.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7303 DAC
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+
+properties:
+  compatible:
+    const: adi,ad7303
+
+  reg:
+    maxItems: 1
+
+  Vdd-supply:
+    description:
+      Used to calculate output channel scalling if REF-supply not specified.
+  REF-supply:
+    description:
+      If not provided, Vdd/2 is used as the reference voltage.
+
+  spi-max-frequency:
+    maximum: 30000000
+
+required:
+  - compatible
+  - reg
+  - Vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@4 {
+            compatible = "adi,ad7303";
+            reg = <4>;
+            spi-max-frequency = <10000000>;
+            Vdd-supply = <&vdd_supply>;
+            REF-supply = <&vref_supply>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
new file mode 100644
index 000000000000..1849a2ff05c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad8801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD8801 and AD8803 DACs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+
+  compatible:
+    enum:
+      - adi,ad8801
+      - adi,ad8803
+
+  reg:
+    maxItems: 1
+
+  vrefh-supply: true
+  vrefl-supply: true
+
+required:
+  - compatible
+  - reg
+  - vrefh-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad8803
+    then:
+      required:
+        - vrefl-supply
+    else:
+      properties:
+        vrefl-supply: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad8803";
+            reg = <0>;
+            vrefl-supply = <&dac_vrefl>;
+            vrefh-supply = <&dac_vrefh>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
new file mode 100644
index 000000000000..15cc6bf59b13
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2688 DAC
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC2688 16 channel, 16 bit, +-15V DAC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2688.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2688
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Analog Supply Voltage Input.
+
+  iovcc-supply:
+    description: Digital Input/Output Supply Voltage.
+
+  vref-supply:
+    description:
+      Reference Input/Output. The voltage at the REF pin sets the full-scale
+      range of all channels. If not provided the internal reference is used and
+      also provided on the VREF pin".
+
+  clr-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-9]|1[0-5])$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: The channel number representing the DAC output channel.
+        maximum: 15
+
+      adi,toggle-mode:
+        description:
+          Set the channel as a toggle enabled channel. Toggle operation enables
+          fast switching of a DAC output between two different DAC codes without
+          any SPI transaction.
+        type: boolean
+
+      adi,output-range-microvolt:
+        description: Specify the channel output full scale range.
+        oneOf:
+          - items:
+              - const: 0
+              - enum: [5000000, 10000000]
+          - items:
+              - const: -5000000
+              - const: 5000000
+          - items:
+              - const: -10000000
+              - const: 10000000
+          - items:
+              - const: -15000000
+              - const: 15000000
+
+      adi,overrange:
+        description: Enable 5% overrange over the selected full scale range.
+        type: boolean
+
+      clocks:
+        maxItems: 1
+
+      adi,toggle-dither-input:
+        description:
+          Selects the TGPx pin to be associated with this channel. This setting
+          only makes sense for toggle or dither enabled channels. If
+          @adi,toggle-mode is not set and this property is given, the channel is
+          assumed to be a dither capable channel. Note that multiple channels
+          can be mapped to the same pin. If this setting is given, the
+          respective @clock must also be provided. Mappings between this and
+          input pins
+            0 - TGP1
+            1 - TGP2
+            2 - TGP3
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+
+    dependencies:
+      adi,toggle-dither-input: [ clocks ]
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    spi {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          ltc2688: ltc2688@0 {
+                  compatible = "adi,ltc2688";
+                  reg = <0>;
+
+                  vcc-supply = <&vcc>;
+                  iovcc-supply = <&vcc>;
+                  vref-supply = <&vref>;
+
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  channel@0 {
+                          reg = <0>;
+                          adi,toggle-mode;
+                          adi,overrange;
+                  };
+
+                  channel@1 {
+                          reg = <1>;
+                          adi,output-range-microvolt = <0 10000000>;
+
+                          clocks = <&clock_tgp3>;
+                          adi,toggle-dither-input = <2>;
+                  };
+          };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/dpot-dac.txt b/Documentation/devicetree/bindings/iio/dac/dpot-dac.txt
deleted file mode 100644
index fdf47a01bfef..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/dpot-dac.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Bindings for DAC emulation using a digital potentiometer
-
-It is assumed that the dpot is used as a voltage divider between the
-current dpot wiper setting and the maximum resistance of the dpot. The
-divided voltage is provided by a vref regulator.
-
-                  .------.
-   .-----------.  |      |
-   | vref      |--'    .---.
-   | regulator |--.    |   |
-   '-----------'  |    | d |
-                  |    | p |
-                  |    | o |  wiper
-                  |    | t |<---------+
-                  |    |   |
-                  |    '---'       dac output voltage
-                  |      |
-                  '------+------------+
-
-Required properties:
-- compatible: Should be "dpot-dac"
-- vref-supply: The regulator supplying the voltage divider.
-- io-channels: Channel node of the dpot to be used for the voltage division.
-- io-channel-names: Should be "dpot".
-
-Example:
-
-	&i2c {
-		dpot: mcp4651-503@28 {
-			compatible = "microchip,mcp4651-503";
-			reg = <0x28>;
-			#io-channel-cells = <1>;
-		};
-	};
-
-	dac {
-		compatible = "dpot-dac";
-		vref-supply = <&reg_3v3>;
-		io-channels = <&dpot 0>;
-		io-channel-names = "dpot";
-	};
diff --git a/Documentation/devicetree/bindings/iio/dac/dpot-dac.yaml b/Documentation/devicetree/bindings/iio/dac/dpot-dac.yaml
new file mode 100644
index 000000000000..6a7ca8e432d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/dpot-dac.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/dpot-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DAC emulation using a digital potentiometer
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  It is assumed that the dpot is used as a voltage divider between the
+  current dpot wiper setting and the maximum resistance of the dpot. The
+  divided voltage is provided by a vref regulator.
+
+                  .------.
+   .-----------.  |      |
+   | vref      |--'    .---.
+   | regulator |--.    |   |
+   '-----------'  |    | d |
+                  |    | p |
+                  |    | o |  wiper
+                  |    | t |<---------+
+                  |    |   |
+                  |    '---'       dac output voltage
+                  |      |
+                  '------+------------+
+
+properties:
+  compatible:
+    const: dpot-dac
+
+  vref-supply:
+    description: Regulator supplying the voltage divider.
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of the dpot to be used for the voltage division.
+
+  io-channel-names:
+    const: dpot
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - vref-supply
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    dac {
+        compatible = "dpot-dac";
+        vref-supply = <&reg_3v3>;
+        io-channels = <&dpot 0>;
+        io-channel-names = "dpot";
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ds4424.txt b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
deleted file mode 100644
index eaebbf8dab40..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ds4424.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC Device Driver
-
-Datasheet publicly available at:
-https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf
-
-Required properties:
-	- compatible: Should be one of
-		maxim,ds4422
-		maxim,ds4424
-	- reg: Should contain the DAC I2C address
-
-Optional properties:
-	- vcc-supply: Power supply is optional. If not defined, driver will ignore it.
-
-Example:
-	ds4224@10 {
-		compatible = "maxim,ds4424";
-		reg = <0x10>; /* When A0, A1 pins are ground */
-		vcc-supply = <&vcc_3v3>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/dac/fsl,vf610-dac.yaml b/Documentation/devicetree/bindings/iio/dac/fsl,vf610-dac.yaml
new file mode 100644
index 000000000000..999c715c6179
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/fsl,vf610-dac.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/fsl,vf610-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale vf610 Digital to Analog Converter
+
+maintainers:
+  - Sanchayan Maity <maitysanchayan@gmail.com>
+
+properties:
+  compatible:
+    const: fsl,vf610-dac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dac
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+    bus@40000000 {
+        compatible = "fsl,aips-bus", "simple-bus";
+        reg = <0x40000000 0x00070000>;
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        dac@400cc000 {
+            compatible = "fsl,vf610-dac";
+            reg = <0x400cc000 0x1000>;
+            interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+            clock-names = "dac";
+            clocks = <&clks VF610_CLK_DAC0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
index a285eaba7125..133b0f867992 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
@@ -34,12 +34,14 @@ required:
   - reg
   - vref-supply
 
+additionalProperties: false
+
 examples:
   - |
     spi {
       #address-cells = <1>;
       #size-cells = <0>;
-  
+
       dac@0 {
         compatible = "lltc,ltc1660";
         reg = <0>;
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
new file mode 100644
index 000000000000..b1eb77335d05
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Bindings for the Linear Technology LTC2632/2634/2636 DAC
+  Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2632-l12
+      - lltc,ltc2632-l10
+      - lltc,ltc2632-l8
+      - lltc,ltc2632-h12
+      - lltc,ltc2632-h10
+      - lltc,ltc2632-h8
+      - lltc,ltc2634-l12
+      - lltc,ltc2634-l10
+      - lltc,ltc2634-l8
+      - lltc,ltc2634-h12
+      - lltc,ltc2634-h10
+      - lltc,ltc2634-h8
+      - lltc,ltc2636-l12
+      - lltc,ltc2636-l10
+      - lltc,ltc2636-l8
+      - lltc,ltc2636-h12
+      - lltc,ltc2636-h10
+      - lltc,ltc2636-h8
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  vref-supply:
+    description:
+      Phandle to the external reference voltage supply. This should
+      only be set if there is an external reference voltage connected to the VREF
+      pin. If the property is not set the internal reference is used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    vref: regulator-vref {
+        compatible = "regulator-fixed";
+        regulator-name = "vref-ltc2632";
+        regulator-min-microvolt = <1250000>;
+        regulator-max-microvolt = <1250000>;
+        regulator-always-on;
+    };
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dac@0 {
+        compatible = "lltc,ltc2632-l12";
+        reg = <0>;    /* CS0 */
+        spi-max-frequency = <1000000>;
+        vref-supply = <&vref>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt
deleted file mode 100644
index 42db783c4e75..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-NXP LPC1850 DAC bindings
-
-Required properties:
-- compatible: Should be "nxp,lpc1850-dac"
-- reg: Offset and length of the register set for the ADC device
-- interrupts: The interrupt number for the ADC device
-- clocks: The root clock of the ADC controller
-- vref-supply: The regulator supply ADC reference voltage
-- resets: phandle to reset controller and line specifier
-
-Example:
-dac: dac@400e1000 {
-	compatible = "nxp,lpc1850-dac";
-	reg = <0x400e1000 0x1000>;
-	interrupts = <0>;
-	clocks = <&ccu1 CLK_APB3_DAC>;
-	vref-supply = <&reg_vdda>;
-	resets = <&rgu 42>;
-};
diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
deleted file mode 100644
index e0d5fea33031..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Linear Technology LTC2632 DAC device driver
-
-Required properties:
- - compatible: Has to contain one of the following:
-	lltc,ltc2632-l12
-	lltc,ltc2632-l10
-	lltc,ltc2632-l8
-	lltc,ltc2632-h12
-	lltc,ltc2632-h10
-	lltc,ltc2632-h8
-
-Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
-apply. In particular, "reg" and "spi-max-frequency" properties must be given.
-
-Optional properties:
-	- vref-supply: Phandle to the external reference voltage supply. This should
-	  only be set if there is an external reference voltage connected to the VREF
-	  pin. If the property is not set the internal reference is used.
-
-Example:
-
-	vref: regulator-vref {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-ltc2632";
-		regulator-min-microvolt = <1250000>;
-		regulator-max-microvolt = <1250000>;
-		regulator-always-on;
-	};
-
-	spi_master {
-		dac: ltc2632@0 {
-			compatible = "lltc,ltc2632-l12";
-			reg = <0>; /* CS0 */
-			spi-max-frequency = <1000000>;
-			vref-supply = <&vref>; /* optional */
-		};
-	};
diff --git a/Documentation/devicetree/bindings/iio/dac/max5821.txt b/Documentation/devicetree/bindings/iio/dac/max5821.txt
deleted file mode 100644
index 54276ce8c971..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/max5821.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Maxim max5821 DAC device driver
-
-Required properties:
-	- compatible: Must be "maxim,max5821"
-	- reg: Should contain the DAC I2C address
-	- vref-supply: Phandle to the vref power supply
-
-Example:
-
-	max5821@38 {
-		compatible = "maxim,max5821";
-		reg = <0x38>;
-		vref-supply = <&reg_max5821>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
new file mode 100644
index 000000000000..264fa7c5fe3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/maxim,ds4424.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC
+
+maintainers:
+  - Ismail Kose <ihkose@gmail.com>
+
+description: |
+  Datasheet publicly available at:
+  https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,ds4422
+      - maxim,ds4424
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@10 {
+            compatible = "maxim,ds4424";
+            reg = <0x10>; /* When A0, A1 pins are ground */
+            vcc-supply = <&vcc_3v3>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/maxim,max5821.yaml b/Documentation/devicetree/bindings/iio/dac/maxim,max5821.yaml
new file mode 100644
index 000000000000..c43fb5f3f8ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/maxim,max5821.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/maxim,max5821.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim max5821 dual 10-bit DAC
+
+maintainers:
+  - Philippe Reynes <tremyfr@yahoo.fr>
+
+description: |
+  Datasheet publicly available at:
+  https://datasheets.maximintegrated.com/en/ds/MAX5821.pdf
+
+properties:
+  compatible:
+    const: maxim,max5821
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@38 {
+            compatible = "maxim,max5821";
+            reg = <0x38>;
+            vref-supply = <&reg_max5821>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/mcp4725.txt b/Documentation/devicetree/bindings/iio/dac/mcp4725.txt
deleted file mode 100644
index 1bc6c093fbfe..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/mcp4725.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Microchip mcp4725 and mcp4726 DAC device driver
-
-Required properties:
-	- compatible: Must be "microchip,mcp4725" or "microchip,mcp4726"
-	- reg: Should contain the DAC I2C address
-	- vdd-supply: Phandle to the Vdd power supply. This supply is used as a
-	  voltage reference on mcp4725. It is used as a voltage reference on
-	  mcp4726 if there is no vref-supply specified.
-
-Optional properties (valid only for mcp4726):
-	- vref-supply: Optional phandle to the Vref power supply. Vref pin is
-	  used as a voltage reference when this supply is specified.
-	- microchip,vref-buffered: Boolean to enable buffering of the external
-	  Vref pin. This boolean is not valid without the vref-supply. Quoting
-	  the datasheet: This is offered in cases where the reference voltage
-	  does not have the current capability not to drop its voltage when
-	  connected to the internal resistor ladder circuit.
-
-Examples:
-
-	/* simple mcp4725 */
-	mcp4725@60 {
-		compatible = "microchip,mcp4725";
-		reg = <0x60>;
-		vdd-supply = <&vdac_vdd>;
-	};
-
-	/* mcp4726 with the buffered external reference voltage */
-	mcp4726@60 {
-		compatible = "microchip,mcp4726";
-		reg = <0x60>;
-		vdd-supply = <&vdac_vdd>;
-		vref-supply = <&vdac_vref>;
-		microchip,vref-buffered;
-	};
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4725.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4725.yaml
new file mode 100644
index 000000000000..5f5b578316bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4725.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4725.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip mcp4725 and mcp4726 DAC
+
+maintainers:
+  - Tomas Novotny <tomas@novotny.cz>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp4725
+      - microchip,mcp4726
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: |
+      Provides both power and acts as the reference supply on the mcp4725.
+      For the mcp4726 it will be used as the reference voltage if vref-supply
+      is not provided.
+
+  vref-supply:
+    description:
+      Vref pin is used as a voltage reference when this supply is specified.
+
+  microchip,vref-buffered:
+    type: boolean
+    description: |
+      Enable buffering of the external Vref pin. This boolean is not valid
+      without the vref-supply. Quoting the datasheet: This is offered in
+      cases where the reference voltage does not have the current
+      capability not to drop its voltage when connected to the internal
+      resistor ladder circuit.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,mcp4725
+    then:
+      properties:
+        vref-supply: false
+      required:
+        - vdd-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,mcp4726
+    then:
+      anyOf:
+        - required:
+            - vdd-supply
+        - required:
+            - vref-supply
+
+  - if:
+      not:
+        required:
+          - vref-supply
+    then:
+      properties:
+        microchip,vref-buffered: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mcp4725@60 {
+            compatible = "microchip,mcp4725";
+            reg = <0x60>;
+            vdd-supply = <&vdac_vdd>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
new file mode 100644
index 000000000000..19374401e509
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4922.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP4902, MCP4912 and MPC4922 dual output SPI DACs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+  - Michael Welling <mwelling@ieee.org>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp4902
+      - microchip,mcp4912
+      - microchip,mcp4921
+      - microchip,mcp4922
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "microchip,mcp4912";
+            reg = <0>;
+            vref-supply = <&dac_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml b/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml
new file mode 100644
index 000000000000..595f481c548e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/nxp,lpc1850-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1850 DAC bindings
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Supports the DAC found on the LPC1850 SoC.
+
+properties:
+  compatible:
+    const: nxp,lpc1850-dac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vref-supply: true
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - vref-supply
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc18xx-ccu.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        dac: dac@400e1000 {
+            compatible = "nxp,lpc1850-dac";
+            reg = <0x400e1000 0x1000>;
+            interrupts = <0>;
+            clocks = <&ccu1 CLK_APB3_DAC>;
+            vref-supply = <&reg_vdda>;
+            resets = <&rgu 42>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
deleted file mode 100644
index bf2925c671c6..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-STMicroelectronics STM32 DAC
-
-The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
-may be configured in 8 or 12-bit mode. It has two output channels, each with
-its own converter.
-It has built-in noise and triangle waveform generator and supports external
-triggers for conversions. The DAC's output buffer allows a high drive output
-current.
-
-Contents of a stm32 dac root node:
------------------------------------
-Required properties:
-- compatible: Should be one of:
-  "st,stm32f4-dac-core"
-  "st,stm32h7-dac-core"
-- reg: Offset and length of the device's register set.
-- clocks: Must contain an entry for pclk (which feeds the peripheral bus
-  interface)
-- clock-names: Must be "pclk".
-- vref-supply: Phandle to the vref+ input analog reference supply.
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- resets: Must contain the phandle to the reset controller.
-- A pinctrl state named "default" for each DAC channel may be defined to set
-  DAC_OUTx pin in mode of operation for analog output on external pin.
-
-Contents of a stm32 dac child node:
------------------------------------
-DAC core node should contain at least one subnode, representing a
-DAC instance/channel available on the machine.
-
-Required properties:
-- compatible: Must be "st,stm32-dac".
-- reg: Must be either 1 or 2, to define (single) channel in use
-- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
-  Documentation/devicetree/bindings/iio/iio-bindings.txt
-
-Example:
-	dac: dac@40007400 {
-		compatible = "st,stm32h7-dac-core";
-		reg = <0x40007400 0x400>;
-		clocks = <&clk>;
-		clock-names = "pclk";
-		vref-supply = <&reg_vref>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dac_out1 &dac_out2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dac1: dac@1 {
-			compatible = "st,stm32-dac";
-			#io-channels-cells = <1>;
-			reg = <1>;
-		};
-
-		dac2: dac@2 {
-			compatible = "st,stm32-dac";
-			#io-channels-cells = <1>;
-			reg = <2>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
new file mode 100644
index 000000000000..6adeda4087fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 DAC bindings
+
+description: |
+  The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
+  may be configured in 8 or 12-bit mode. It has two output channels, each with
+  its own converter.
+  It has built-in noise and triangle waveform generator and supports external
+  triggers for conversions. The DAC's output buffer allows a high drive output
+  current.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-dac-core
+      - st,stm32h7-dac-core
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+
+  vref-supply:
+    description: Phandle to the vref input analog reference voltage.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  "^dac@[1-2]+$":
+    type: object
+    description:
+      A DAC block node should contain at least one subnode, representing an
+      DAC instance/channel available on the machine.
+
+    properties:
+      compatible:
+        const: st,stm32-dac
+
+      reg:
+        description: Must be either 1 or 2, to define (single) channel in use
+        enum: [1, 2]
+
+      '#io-channel-cells':
+        const: 1
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - '#io-channel-cells'
+
+examples:
+  - |
+    // Example on stm32mp157c
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    dac: dac@40017000 {
+      compatible = "st,stm32h7-dac-core";
+      reg = <0x40017000 0x400>;
+      clocks = <&rcc DAC12>;
+      clock-names = "pclk";
+      vref-supply = <&vref>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dac@1 {
+        compatible = "st,stm32-dac";
+        #io-channel-cells = <1>;
+        reg = <1>;
+      };
+
+      dac@2 {
+        compatible = "st,stm32-dac";
+        #io-channel-cells = <1>;
+        reg = <2>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
new file mode 100644
index 000000000000..201b04af2b22
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac082s085.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC082s085 and similar DACs
+
+description:
+  A family of Texas Instruments 8/10/12-bit 2/4-channel DACs
+
+maintainers:
+  - Lukas Wunner <lukas@wunner.de>
+
+properties:
+  compatible:
+    enum:
+      - ti,dac082s085
+      - ti,dac102s085
+      - ti,dac122s085
+      - ti,dac084s085
+      - ti,dac104s085
+      - ti,dac124s085
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+  spi-cpol:
+    description:
+      Must be either spi-cpha, or spi-cpol but not both.
+
+  vref-supply:
+    description: Needed to provide output scaling.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+oneOf:
+  - required:
+      - spi-cpha
+  - required:
+      - spi-cpol
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    vref_2v5_reg: regulator-vref {
+        compatible = "regulator-fixed";
+        regulator-name = "2v5";
+        regulator-min-microvolt = <2500000>;
+        regulator-max-microvolt = <2500000>;
+        regulator-always-on;
+    };
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "ti,dac082s085";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+            spi-cpol;
+            vref-supply = <&vref_2v5_reg>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.txt
deleted file mode 100644
index 03af6b9a4d07..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Texas Instruments DAC5571 Family
-
-Required properties:
- - compatible: Should contain
-    "ti,dac5571"
-    "ti,dac6571"
-    "ti,dac7571"
-    "ti,dac5574"
-    "ti,dac6574"
-    "ti,dac7574"
-    "ti,dac5573"
-    "ti,dac6573"
-    "ti,dac7573"
- - reg: Should contain the DAC I2C address
-
-Optional properties:
- - vref-supply: The regulator supply for DAC reference voltage
-
-Example:
-dac@0 {
-	compatible = "ti,dac5571";
-	reg = <0x4C>;
-	vref-supply = <&vdd_supply>;
-};
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
new file mode 100644
index 000000000000..88298bc43b81
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac5571.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC5571 Family
+
+maintainers:
+  - Sean Nyekjaer <sean@geanix.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,dac5571
+      - ti,dac6571
+      - ti,dac7571
+      - ti,dac5574
+      - ti,dac6574
+      - ti,dac7574
+      - ti,dac5573
+      - ti,dac6573
+      - ti,dac7573
+      - ti,dac121c081
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Reference voltage must be supplied to establish the scaling of the
+      output voltage.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@4c {
+            compatible = "ti,dac5571";
+            reg = <0x4C>;
+            vref-supply = <&vdd_supply>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt
deleted file mode 100644
index e5a507db5e01..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-TI DAC7311 device tree bindings
-
-Required properties:
-- compatible: must be set to:
-	* "ti,dac7311"
-	* "ti,dac6311"
-	* "ti,dac5311"
-- reg: spi chip select number for the device
-- vref-supply: The regulator supply for ADC reference voltage
-
-Optional properties:
-- spi-max-frequency: Max SPI frequency to use
-
-Example:
-
-	spi_master {
-		dac@0 {
-			compatible = "ti,dac7311";
-			reg = <0>; /* CS0 */
-			spi-max-frequency = <1000000>;
-			vref-supply = <&vdd_supply>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
new file mode 100644
index 000000000000..a6814587dbc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac7311.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC5311 and similar SPI DACs
+
+maintainers:
+  - Charles-Antoine Couret <charles-antoine.couret@essensium.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,dac7311
+      - ti,dac6311
+      - ti,dac5311
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Reference voltage must be supplied to establish the scaling of the
+      output voltage.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "ti,dac7311";
+            reg = <0>; /* CS0 */
+            spi-max-frequency = <1000000>;
+            vref-supply = <&vdd_supply>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7512.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7512.txt
deleted file mode 100644
index 1db45939dac9..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7512.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-TI DAC7512 DEVICETREE BINDINGS
-
-Required properties:
-
-	- "compatible"		Must be set to "ti,dac7512"
-
-Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
-apply. In particular, "reg" and "spi-max-frequency" properties must be given.
-
-
-Example:
-
-	spi_master {
-		dac7512: dac7512@0 {
-			compatible = "ti,dac7512";
-			reg = <0>; /* CS0 */
-			spi-max-frequency = <1000000>;
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7512.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7512.yaml
new file mode 100644
index 000000000000..4277cf8a4a2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7512.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac7512.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC7512 DAC
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: ti,dac7512
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    description:
+      Maximum frequency is reduced for supply voltage of less than 3.6V
+    maximum: 30000000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "ti,dac7512";
+            reg = <0>; /* CS0 */
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
deleted file mode 100644
index 639c94ed83e9..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter
-
-The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with guaranteed
-12-bit monotonicity performance over the industrial temperature range.
-Is is programmable through an SPI interface.
-
-The internal DACs are loaded when the LOADDACS pin is pulled down.
-
-http://www.ti.com/lit/ds/sbas106/sbas106.pdf
-
-Required Properties:
-- compatible: Should be one of:
-		"ti,dac7612"
-		"ti,dac7612u"
-		"ti,dac7612ub"
-- reg: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Optional Properties:
-- ti,loaddacs-gpios: GPIO descriptor for the LOADDACS pin.
-- spi-*: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
-	dac@1 {
-		compatible = "ti,dac7612";
-		reg = <0x1>;
-		ti,loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
new file mode 100644
index 000000000000..20dd1370660d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac7612.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC7612 family of DACs
+
+description:
+  The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with
+  guaranteed 12-bit monotonicity performance over the industrial temperature
+  range. Is is programmable through an SPI interface.
+
+maintainers:
+  - Ricardo Ribalda Delgado <ricardo@ribalda.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,dac7612
+      - ti,dac7612u
+      - ti,dac7612ub
+
+  reg:
+    maxItems: 1
+
+  ti,loaddacs-gpios:
+    description:
+      DACs are loaded when the pin connected to this GPIO is pulled low.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@1 {
+            compatible = "ti,dac7612";
+            reg = <0x1>;
+            ti,loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt
deleted file mode 100644
index 9cb0e10df704..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Texas Instruments 8/10/12-bit 2/4-channel DAC driver
-
-Required properties:
- - compatible:		Must be one of:
-			"ti,dac082s085"
-			"ti,dac102s085"
-			"ti,dac122s085"
-			"ti,dac084s085"
-			"ti,dac104s085"
-			"ti,dac124s085"
- - reg: 		Chip select number.
- - spi-cpha, spi-cpol:	SPI mode (0,1) or (1,0) must be used, so specify
-			either spi-cpha or spi-cpol (but not both).
- - vref-supply: 	Phandle to the external reference voltage supply.
-
-For other required and optional properties of SPI slave nodes please refer to
-../../spi/spi-bus.txt.
-
-Example:
-	vref_2v5_reg: regulator-vref {
-		compatible = "regulator-fixed";
-		regulator-name = "2v5";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	dac@0 {
-		compatible = "ti,dac082s085";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-		spi-cpol;
-		vref-supply = <&vref_2v5_reg>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/dac/vf610-dac.txt b/Documentation/devicetree/bindings/iio/dac/vf610-dac.txt
deleted file mode 100644
index 20c6c7ae9687..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/vf610-dac.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Freescale vf610 Digital to Analog Converter bindings
-
-The devicetree bindings are for the new DAC driver written for
-vf610 SoCs from Freescale.
-
-Required properties:
-- compatible: Should contain "fsl,vf610-dac"
-- reg: Offset and length of the register set for the device
-- interrupts: Should contain the interrupt for the device
-- clocks: The clock is needed by the DAC controller
-- clock-names: Must contain "dac" matching entry in the clocks property.
-
-Example:
-dac0: dac@400cc000 {
-	compatible = "fsl,vf610-dac";
-	reg = <0x400cc000 0x1000>;
-	interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
-	clock-names = "dac";
-	clocks = <&clks VF610_CLK_DAC0>;
-};
diff --git a/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
new file mode 100644
index 000000000000..b77e855bd594
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/filter/adi,admv8818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV8818 Digitally Tunable, High-Pass and Low-Pass Filter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+    Fully monolithic microwave integrated circuit (MMIC) that
+    features a digitally selectable frequency of operation.
+    The device features four independently controlled high-pass
+    filters (HPFs) and four independently controlled low-pass filters
+    (LPFs) that span the 2 GHz to 18 GHz frequency range.
+
+    https://www.analog.com/en/products/admv8818.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv8818
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: rf_in
+
+  clock-output-names:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      admv8818@0 {
+        compatible = "adi,admv8818";
+        reg = <0>;
+        spi-max-frequency = <10000000>;
+        clocks = <&admv8818_rfin>;
+        clock-names = "rf_in";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4350.txt b/Documentation/devicetree/bindings/iio/frequency/adf4350.txt
deleted file mode 100644
index f8c181d81d2d..000000000000
--- a/Documentation/devicetree/bindings/iio/frequency/adf4350.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-Analog Devices ADF4350/ADF4351 device driver
-
-Required properties:
-	- compatible: Should be one of
-		* "adi,adf4350": When using the ADF4350 device
-		* "adi,adf4351": When using the ADF4351 device
-	- reg: SPI chip select numbert for the device
-	- spi-max-frequency: Max SPI frequency to use (< 20000000)
-	- clocks: From common clock binding. Clock is phandle to clock for
-		ADF435x Reference Clock (CLKIN).
-
-Optional properties:
-	- gpios:	 GPIO Lock detect - If set with a valid phandle and GPIO number,
-			pll lock state is tested upon read.
-	- adi,channel-spacing: Channel spacing in Hz (influences MODULUS).
-	- adi,power-up-frequency:	If set in Hz the PLL tunes to
-			the desired frequency on probe.
-	- adi,reference-div-factor: If set the driver skips dynamic calculation
-			and uses this default value instead.
-	- adi,reference-doubler-enable: Enables reference doubler.
-	- adi,reference-div2-enable: Enables reference divider.
-	- adi,phase-detector-polarity-positive-enable: Enables positive phase
-			detector polarity. Default = negative.
-	- adi,lock-detect-precision-6ns-enable: Enables 6ns lock detect precision.
-			Default = 10ns.
-	- adi,lock-detect-function-integer-n-enable: Enables lock detect
-			for integer-N mode. Default = factional-N mode.
-	- adi,charge-pump-current: Charge pump current in mA.
-			Default = 2500mA.
-	- adi,muxout-select: On chip multiplexer output selection.
-			Valid values for the multiplexer output are:
-			0: Three-State Output (default)
-			1: DVDD
-			2: DGND
-			3: R-Counter output
-			4: N-Divider output
-			5: Analog lock detect
-			6: Digital lock detect
-	- adi,low-spur-mode-enable: Enables low spur mode.
-			Default = Low noise mode.
-	- adi,cycle-slip-reduction-enable: Enables cycle slip reduction.
-	- adi,charge-cancellation-enable: Enabled charge pump
-			charge cancellation for integer-N modes.
-	- adi,anti-backlash-3ns-enable: Enables 3ns antibacklash pulse width
-			 for integer-N modes.
-	- adi,band-select-clock-mode-high-enable: Enables faster band
-			selection logic.
-	- adi,12bit-clk-divider: Clock divider value used when
-			adi,12bit-clkdiv-mode != 0
-	- adi,clk-divider-mode:
-			Valid values for the clkdiv mode are:
-			0: Clock divider off (default)
-			1: Fast lock enable
-			2: Phase resync enable
-	- adi,aux-output-enable: Enables auxiliary RF output.
-	- adi,aux-output-fundamental-enable: Selects fundamental VCO output on
-			the auxiliary RF output. Default = Output of RF dividers.
-	- adi,mute-till-lock-enable: Enables Mute-Till-Lock-Detect function.
-	- adi,output-power: Output power selection.
-			Valid values for the power mode are:
-			0: -4dBm (default)
-			1: -1dBm
-			2: +2dBm
-			3: +5dBm
-	- adi,aux-output-power: Auxiliary output power selection.
-			Valid values for the power mode are:
-			0: -4dBm (default)
-			1: -1dBm
-			2: +2dBm
-			3: +5dBm
-
-
-Example:
-		lo_pll0_rx_adf4351: adf4351-rx-lpc@4 {
-			compatible = "adi,adf4351";
-			reg = <4>;
-			spi-max-frequency = <10000000>;
-			clocks = <&clk0_ad9523 9>;
-			clock-names = "clkin";
-			adi,channel-spacing = <10000>;
-			adi,power-up-frequency = <2400000000>;
-			adi,phase-detector-polarity-positive-enable;
-			adi,charge-pump-current = <2500>;
-			adi,output-power = <3>;
-			adi,mute-till-lock-enable;
-		};
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index 7ec3ec94356b..0144f74a4768 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -46,6 +46,11 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi0 {
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml
new file mode 100644
index 000000000000..d7f20b8518e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,adf4350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADF4350/ADF4351 wideband synthesizer
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - adi,adf4350
+      - adi,adf4351
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  clocks:
+    maxItems: 1
+    description: Clock to provide CLKIN reference clock signal.
+
+  clock-names:
+    const: clkin
+
+  gpios:
+    maxItems: 1
+    description: Lock detect GPIO.
+
+  adi,channel-spacing:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Channel spacing in Hz (influences MODULUS).
+
+  adi,power-up-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      If set the PLL tunes to this frequency (in Hz) on driver probe.
+
+  adi,reference-div-factor:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      If set the driver skips dynamic calculation and uses this default
+      value instead.
+
+  adi,reference-doubler-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables reference doubler.
+
+  adi,reference-div2-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables reference divider.
+
+  adi,phase-detector-polarity-positive-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables positive phase detector polarity. Default negative.
+
+  adi,lock-detect-precision-6ns-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables 6ns lock detect precision. Default = 10ns.
+
+  adi,lock-detect-function-integer-n-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enables lock detect for integer-N mode. Default = factional-N mode.
+
+  adi,charge-pump-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Charge pump current in mA. Default = 2500mA.
+
+  adi,muxout-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 6
+    description: |
+      On chip multiplexer output selection.
+      Valid values for the multiplexer output are:
+      0: Three-State Output (default)
+      1: DVDD
+      2: DGND
+      3: R-Counter output
+      4: N-Divider output
+      5: Analog lock detect
+      6: Digital lock detect
+
+  adi,low-spur-mode-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables low spur mode. Default = Low noise mode.
+
+  adi,cycle-slip-reduction-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables cycle slip reduction.
+
+  adi,charge-cancellation-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enabled charge pump charge cancellation for integer-N modes.
+
+  adi,anti-backlash-3ns-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enables 3ns antibacklash pulse width for integer-N modes.
+
+  adi,band-select-clock-mode-high-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables faster band selection logic.
+
+  adi,12bit-clk-divider:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Clock divider value used when adi,12bit-clkdiv-mode != 0
+
+  adi,clk-divider-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    description: |
+      Valid values for the clkdiv mode are:
+      0: Clock divider off (default)
+      1: Fast lock enable
+      2: Phase resync enable
+
+  adi,aux-output-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables auxiliary RF output.
+
+  adi,aux-output-fundamental-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Selects fundamental VCO output on the auxiliary RF output.
+      Default = Output of RF dividers.
+
+  adi,mute-till-lock-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables Mute-Till-Lock-Detect function.
+
+  adi,output-power:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Output power selection.
+      Valid values for the power mode are:
+      0: -4dBm (default)
+      1: -1dBm
+      2: +2dBm
+      3: +5dBm
+
+  adi,aux-output-power:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Auxiliary output power selection.
+      Valid values for the power mode are:
+      0: -4dBm (default)
+      1: -1dBm
+      2: +2dBm
+      3: +5dBm
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pll@4 {
+            compatible = "adi,adf4351";
+            reg = <4>;
+            spi-max-frequency = <10000000>;
+            clocks = <&clk0_ad9523 9>;
+            clock-names = "clkin";
+            adi,channel-spacing = <10000>;
+            adi,power-up-frequency = <2400000000>;
+            adi,phase-detector-polarity-positive-enable;
+            adi,charge-pump-current = <2500>;
+            adi,output-power = <3>;
+            adi,mute-till-lock-enable;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
new file mode 100644
index 000000000000..23f1f3b55abb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv1013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV1013 Microwave Upconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave upconverter optimized for point to point microwave
+   radio designs operating in the 24 GHz to 44 GHz frequency range.
+
+   https://www.analog.com/en/products/admv1013.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv1013
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+
+  vcm-supply:
+    description:
+      Analog voltage regulator.
+
+  adi,detector-enable:
+    description:
+      Enable the Envelope Detector available at output pins VENV_P and
+      VENV_N. Disable to reduce power consumption.
+    type: boolean
+
+  adi,input-mode:
+    description:
+      Select the input mode.
+      iq - in-phase quadrature (I/Q) input
+      if - complex intermediate frequency (IF) input
+    enum: [iq, if]
+
+  adi,quad-se-mode:
+    description:
+      Switch the LO path from differential to single-ended operation.
+      se-neg - Single-Ended Mode, Negative Side Disabled.
+      se-pos - Single-Ended Mode, Positive Side Disabled.
+      diff - Differential Mode.
+    enum: [se-neg, se-pos, diff]
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vcm-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      admv1013@0{
+        compatible = "adi,admv1013";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&admv1013_lo>;
+        clock-names = "lo_in";
+        vcm-supply = <&vcm>;
+        adi,quad-se-mode = "diff";
+        adi,detector-enable;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
new file mode 100644
index 000000000000..2716c1e8fe31
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv1014.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV1014 Microwave Downconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave downconverter optimized for point to point microwave
+   radio designs operating in the 24 GHz to 44 GHz frequency range.
+
+   https://www.analog.com/en/products/admv1014.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv1014
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+    description:
+      External clock that provides the Local Oscilator input.
+
+  vcm-supply:
+    description:
+      Common-mode voltage regulator.
+
+  vcc-if-bb-supply:
+    description:
+      BB and IF supply voltage regulator.
+
+  vcc-vga-supply:
+    description:
+      RF Amplifier supply voltage regulator.
+
+  vcc-vva-supply:
+    description:
+      VVA Control Circuit supply voltage regulator.
+
+  vcc-lna-3p3-supply:
+    description:
+      Low Noise Amplifier 3.3V supply voltage regulator.
+
+  vcc-lna-1p5-supply:
+    description:
+      Low Noise Amplifier 1.5V supply voltage regulator.
+
+  vcc-bg-supply:
+    description:
+      Band Gap Circuit supply voltage regulator.
+
+  vcc-quad-supply:
+    description:
+      Quadruple supply voltage regulator.
+
+  vcc-mixer-supply:
+    description:
+      Mixer supply voltage regulator.
+
+  adi,input-mode:
+    description:
+      Select the input mode.
+      iq - in-phase quadrature (I/Q) input
+      if - complex intermediate frequency (IF) input
+    enum: [iq, if]
+
+  adi,detector-enable:
+    description:
+      Digital Rx Detector Enable. The Square Law Detector output is
+      available at output pin VDET.
+    type: boolean
+
+  adi,p1db-compensation-enable:
+    description:
+      Turn on bits to optimize P1dB.
+    type: boolean
+
+  adi,quad-se-mode:
+    description:
+      Switch the LO path from differential to single-ended operation.
+      se-neg - Single-Ended Mode, Negative Side Disabled.
+      se-pos - Single-Ended Mode, Positive Side Disabled.
+      diff - Differential Mode.
+    enum: [se-neg, se-pos, diff]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vcm-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      converter@0 {
+        compatible = "adi,admv1014";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&admv1014_lo>;
+        clock-names = "lo_in";
+        vcm-supply = <&vcm>;
+        vcc-if-bb-supply = <&vcc_if_bb>;
+        vcc-vga-supply = <&vcc_vga>;
+        vcc-vva-supply = <&vcc_vva>;
+        vcc-lna-3p3-supply = <&vcc_lna_3p3>;
+        vcc-lna-1p5-supply = <&vcc_lna_1p5>;
+        vcc-bg-supply = <&vcc_bg>;
+        vcc-quad-supply = <&vcc_quad>;
+        vcc-mixer-supply = <&vcc_mixer>;
+        adi,quad-se-mode = "diff";
+        adi,detector-enable;
+        adi,p1db-compensation-enable;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
new file mode 100644
index 000000000000..da7fe85ec92e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv4420.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV4420 K Band Downconverter
+
+maintainers:
+  - Cristian Pop <cristian.pop@analog.com>
+
+description:
+  The ADMV4420 is a highly integrated, double balanced, active
+  mixer with an integrated fractional-N synthesizer, ideally suited
+  for next generation K band satellite communications
+
+properties:
+  compatible:
+    enum:
+      - adi,admv4420
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  adi,lo-freq-khz:
+    description: LO Frequency
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  adi,ref-ext-single-ended-en:
+    description: External reference selected.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mixer@0 {
+        compatible = "adi,admv4420";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        adi,lo-freq-khz = <16750000>;
+        adi,ref-ext-single-ended-en;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
new file mode 100644
index 000000000000..3a8ea93f4e0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,adrf6780.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADRF6780 Microwave Upconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave upconverter optimized for point to point microwave
+   radio designs operating in the 5.9 GHz to 23.6 GHz frequency range.
+
+   https://www.analog.com/en/products/adrf6780.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adrf6780
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+
+  clock-output-names:
+    maxItems: 1
+
+  adi,vga-buff-en:
+    description:
+      RF Variable Gain Amplifier Buffer Enable. Gain is controlled by
+      the voltage on the VATT pin.
+    type: boolean
+
+  adi,lo-buff-en:
+    description:
+      Local Oscillator Amplifier Enable. Disable to put the part in
+      a power down state.
+    type: boolean
+
+  adi,if-mode-en:
+    description:
+      Intermediate Frequency Mode Enable. Either IF Mode or I/Q Mode
+      can be enabled at a time.
+    type: boolean
+
+  adi,iq-mode-en:
+    description:
+      I/Q Mode Enable. Either IF Mode or I/Q Mode can be enabled at a
+      time.
+    type: boolean
+
+  adi,lo-x2-en:
+    description:
+      Double the Local Oscillator output frequency from the Local
+      Oscillator Input Frequency. Either LOx1 or LOx2 can be enabled
+      at a time.
+    type: boolean
+
+  adi,lo-ppf-en:
+    description:
+      Local Oscillator input frequency equal to the Local Oscillator
+      output frequency (LO x1). Either LOx1 or LOx2 can be enabled
+      at a time.
+    type: boolean
+
+  adi,lo-en:
+    description:
+      Enable additional cirtuitry in the LO chain. Disable to put the
+      part in a power down state.
+    type: boolean
+
+  adi,uc-bias-en:
+    description:
+      Enable all bias circuitry thourghout the entire part.
+      Disable to put the part in a power down state.
+    type: boolean
+
+  adi,lo-sideband:
+    description:
+      Switch to the Lower LO Sideband. By default the Upper LO
+      sideband is enabled.
+    type: boolean
+
+  adi,vdet-out-en:
+    description:
+      VDET Output Select Enable. Expose the RF detector output to the
+      VDET external pin.
+    type: boolean
+
+  '#clock-cells':
+    const: 0
+
+dependencies:
+  adi,lo-x2-en: [ "adi,lo-en" ]
+  adi,lo-ppf-en: [ "adi,lo-en" ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      adrf6780@0 {
+        compatible = "adi,adrf6780";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&adrf6780_lo>;
+        clock-names = "lo_in";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
new file mode 100644
index 000000000000..662ec59ca0af
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/gyroscope/adi,adxrs290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXRS290 Dual-Axis MEMS Gyroscope
+
+maintainers:
+  - Nishant Malpani <nish.malpani25@gmail.com>
+
+description: |
+  Bindings for the Analog Devices ADXRS290 dual-axis MEMS gyroscope device.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADXRS290.pdf
+
+properties:
+  compatible:
+    const: adi,adxrs290
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - spi-cpol
+  - spi-cpha
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gyro@0 {
+                   compatible = "adi,adxrs290";
+                   reg = <0>;
+                   spi-max-frequency = <5000000>;
+                   spi-cpol;
+                   spi-cpha;
+                   interrupt-parent = <&gpio>;
+                   interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt b/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
deleted file mode 100644
index 78e18a1e9c1d..000000000000
--- a/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Bosch BMG160 triaxial rotation sensor (gyroscope)
-
-Required properties:
-
-  - compatible : should be "bosch,bmg160" or "bosch,bmi055_gyro"
-  - reg : the I2C address of the sensor (0x69)
-
-Optional properties:
-
-  - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
-		flags IRQ_TYPE_EDGE_RISING
-
-Example:
-
-bmg160@69 {
-	compatible = "bosch,bmg160";
-	reg = <0x69>;
-	interrupt-parent = <&gpio6>;
-	interrupts = <18 (IRQ_TYPE_EDGE_RISING)>;
-};
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
new file mode 100644
index 000000000000..1414ba9977c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/gyroscope/bosch,bmg160.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMG160 triaxial rotation sensor (gyroscope)
+
+maintainers:
+  - H. Nikolaus Schaller <hns@goldelico.com>
+
+properties:
+  compatible:
+    enum:
+      - bosch,bmg160
+      - bosch,bmi055_gyro
+      - bosch,bmi088_gyro
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description:
+      Should be configured with type IRQ_TYPE_EDGE_RISING.
+      If two interrupts are provided, expected order is INT1 and INT2.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gyroscope@69 {
+            compatible = "bosch,bmg160";
+            reg = <0x69>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <18 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
deleted file mode 100644
index 233fe207aded..000000000000
--- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Invensense MPU-3050 Gyroscope device tree bindings
-
-Required properties:
-  - compatible : should be "invensense,mpu3050"
-  - reg : the I2C address of the sensor
-
-Optional properties:
-  - interrupts : interrupt mapping for the trigger interrupt from the
-    internal oscillator. The following IRQ modes are supported:
-    IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH and
-    IRQ_TYPE_LEVEL_LOW. The driver should detect and configure the hardware
-    for the desired interrupt type.
-  - vdd-supply : supply regulator for the main power voltage.
-  - vlogic-supply : supply regulator for the signal voltage.
-  - mount-matrix : see iio/mount-matrix.txt
-
-Optional subnodes:
-  - The MPU-3050 will pass through and forward the I2C signals from the
-    incoming I2C bus, alternatively drive traffic to a slave device (usually
-    an accelerometer) on its own initiative. Therefore is supports a subnode
-    i2c gate node. For details see: i2c/i2c-gate.txt
-
-Example:
-
-mpu3050@68 {
-	compatible = "invensense,mpu3050";
-	reg = <0x68>;
-	interrupt-parent = <&foo>;
-	interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
-	vdd-supply = <&bar>;
-	vlogic-supply = <&baz>;
-
-	/* External I2C interface */
-	i2c-gate {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fnord@18 {
-			compatible = "fnord";
-			reg = <0x18>;
-			interrupt-parent = <&foo>;
-			interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
new file mode 100644
index 000000000000..d1a6103fc37a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/gyroscope/invensense,mpu3050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Invensense MPU-3050 Gyroscope
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: invensense,mpu3050
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  vlogic-supply: true
+
+  interrupts:
+    minItems: 1
+    description:
+      Interrupt mapping for the trigger interrupt from the internal oscillator.
+
+  mount-matrix: true
+
+  i2c-gate:
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+    description: |
+      The MPU-3050 will pass through and forward the I2C signals from the
+      incoming I2C bus, alternatively drive traffic to a slave device (usually
+      an accelerometer) on its own initiative. Therefore is supports an
+      i2c-gate subnode.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gyroscope@68 {
+            compatible = "invensense,mpu3050";
+            reg = <0x68>;
+            interrupt-parent = <&foo>;
+            interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&bar>;
+            vlogic-supply = <&baz>;
+
+            i2c-gate {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                magnetometer@c {
+                    compatible = "asahi-kasei,ak8975";
+                    reg = <0x0c>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
deleted file mode 100644
index 465e104bbf14..000000000000
--- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* NXP FXAS21002C Gyroscope device tree bindings
-
-http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
-
-Required properties:
-  - compatible : should be "nxp,fxas21002c"
-  - reg : the I2C address of the sensor or SPI chip select number for the
-          device.
-  - vdd-supply: phandle to the regulator that provides power to the sensor.
-  - vddio-supply: phandle to the regulator that provides power to the bus.
-
-Optional properties:
-  - reset-gpios : gpio used to reset the device, see gpio/gpio.txt
-  - interrupts : device support 2 interrupts, INT1 and INT2,
-                 the interrupts can be triggered on rising or falling edges.
-                 See interrupt-controller/interrupts.txt
-  - interrupt-names: should contain "INT1" or "INT2", the gyroscope interrupt
-                     line in use.
-  - drive-open-drain: the interrupt/data ready line will be configured
-                      as open drain, which is useful if several sensors share
-                      the same interrupt line. This is a boolean property.
-                      (This binding is taken from pinctrl/pinctrl-bindings.txt)
-
-Example:
-
-gyroscope@20 {
-	compatible = "nxp,fxas21002c";
-	reg = <0x20>;
-	vdd-supply = <&reg_peri_3p15v>;
-	vddio-supply = <&reg_peri_3p15v>;
-};
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
new file mode 100644
index 000000000000..3f57a1b813e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/gyroscope/nxp,fxas21002c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FXAS21002C Gyroscope
+
+maintainers:
+  - Rui Miguel Silva <rmfrfs@gmail.com>
+
+description: |
+  3 axis digital gyroscope device with an I2C and SPI interface.
+  http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
+
+properties:
+  compatible:
+    const: nxp,fxas21002c
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to reset
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: Either interrupt may be triggered on rising or falling edges.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    type: boolean
+    description: the interrupt/data ready line will be configured as open drain,
+                 which is useful if several sensors share the same interrupt
+                 line.
+
+  spi-max-frequency:
+    maximum: 2000000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gyroscope@20 {
+          compatible = "nxp,fxas21002c";
+          reg = <0x20>;
+
+          vdd-supply = <&reg_peri_3p15v>;
+          vddio-supply = <&reg_peri_3p15v>;
+
+          interrupt-parent = <&gpio1>;
+          interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+          interrupt-names = "INT1";
+        };
+    };
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gyroscope@0 {
+          compatible = "nxp,fxas21002c";
+          reg = <0x0>;
+
+          spi-max-frequency = <2000000>;
+
+          interrupt-parent = <&gpio2>;
+          interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+          interrupt-names = "INT2";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/health/afe4403.txt b/Documentation/devicetree/bindings/iio/health/afe4403.txt
deleted file mode 100644
index 8e412054d6d5..000000000000
--- a/Documentation/devicetree/bindings/iio/health/afe4403.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Texas Instruments AFE4403 Heart rate and Pulse Oximeter
-
-Required properties:
- - compatible		: Should be "ti,afe4403".
- - reg			: SPI chip select address of device.
- - tx-supply		: Regulator supply to transmitting LEDs.
- - interrupts		: The interrupt line the device ADC_RDY pin is
-			  connected to. For details refer to,
-			  ../../interrupt-controller/interrupts.txt.
-
-Optional properties:
- - reset-gpios		: GPIO used to reset the device.
-			  For details refer to, ../../gpio/gpio.txt.
-
-For other required and optional properties of SPI slave nodes
-please refer to ../../spi/spi-bus.txt.
-
-Example:
-
-&spi0 {
-	heart_mon@0 {
-		compatible = "ti,afe4403";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		tx-supply = <&vbat>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
-
-		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt
deleted file mode 100644
index 0b52830a0d9c..000000000000
--- a/Documentation/devicetree/bindings/iio/health/afe4404.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Texas Instruments AFE4404 Heart rate and Pulse Oximeter
-
-Required properties:
- - compatible		: Should be "ti,afe4404".
- - reg			: I2C address of the device.
- - tx-supply		: Regulator supply to transmitting LEDs.
- - interrupts		: The interrupt line the device ADC_RDY pin is
-			  connected to. For details refer to,
-			  ../interrupt-controller/interrupts.txt.
-
-Optional properties:
- - reset-gpios		: GPIO used to reset the device.
-			  For details refer to, ../gpio/gpio.txt.
-
-Example:
-
-&i2c2 {
-	heart_mon@58 {
-		compatible = "ti,afe4404";
-		reg = <0x58>;
-
-		tx-supply = <&vbat>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
-
-		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt
deleted file mode 100644
index 0054908a6e74..000000000000
--- a/Documentation/devicetree/bindings/iio/health/max30100.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Maxim MAX30100 heart rate and pulse oximeter sensor
-
-* https://datasheets.maximintegrated.com/en/ds/MAX30100.pdf
-
-Required properties:
-  - compatible: must be "maxim,max30100"
-  - reg: the I2C address of the sensor
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic
-  interrupt client node bindings.
-
-Optional properties:
-  - maxim,led-current-microamp: configuration for LED current in microamperes
-    while the engine is running. First indexed value is the configuration for
-    the RED LED, and second value is for the IR LED.
-
-    Refer to the datasheet for the allowed current values.
-
-Example:
-
-max30100@57 {
-	compatible = "maxim,max30100";
-	reg = <0x57>;
-	maxim,led-current-microamp = <24000 50000>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 2>;
-};
diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt
deleted file mode 100644
index 7ef7ae40ae4f..000000000000
--- a/Documentation/devicetree/bindings/iio/health/max30102.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Maxim MAX30102 heart rate and pulse oximeter sensor
-Maxim MAX30105 optical particle-sensing module
-
-* https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf
-* https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf
-
-Required properties:
-  - compatible: must be "maxim,max30102" or "maxim,max30105"
-  - reg: the I2C address of the sensor
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic
-  interrupt client node bindings.
-
-Optional properties:
-  - maxim,red-led-current-microamp: configuration for red LED current
-  - maxim,ir-led-current-microamp: configuration for IR LED current
-  - maxim,green-led-current-microamp: configuration for green LED current
-    (max30105 only)
-
-    Note that each step is approximately 200 microamps, ranging from 0 uA to
-    50800 uA.
-
-Example:
-
-max30102@57 {
-	compatible = "maxim,max30102";
-	reg = <0x57>;
-	maxim,red-led-current-microamp = <7000>;
-	maxim,ir-led-current-microamp = <7000>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 2>;
-};
diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml
new file mode 100644
index 000000000000..967778fb0ce8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/health/maxim,max30100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX30100 heart rate and pulse oximeter sensor
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+properties:
+  compatible:
+    const: maxim,max30100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Connected to ADC_RDY pin.
+
+  maxim,led-current-microamp:
+    minItems: 2
+    maxItems: 2
+    description: |
+      LED current whilst the engine is running. First indexed value is
+      the configuration for the RED LED, and second value is for the IR LED.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        heart-rate@57 {
+            compatible = "maxim,max30100";
+            reg = <0x57>;
+            maxim,led-current-microamp = <24000 50000>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
new file mode 100644
index 000000000000..c13c10c8d65d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/health/maxim,max30102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX30102 heart rate and pulse oximeter and MAX30105 particle-sensor
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+properties:
+  compatible:
+    enum:
+      - maxim,max30102
+      - maxim,max30105
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Connected to ADC_RDY pin.
+
+  maxim,red-led-current-microamp:
+    description: RED LED current. Each step is approximately 200 microamps.
+    minimum: 0
+    maximum: 50800
+
+  maxim,ir-led-current-microamp:
+    description: IR LED current. Each step is approximately 200 microamps.
+    minimum: 0
+    maximum: 50800
+
+  maxim,green-led-current-microamp:
+    description: Green LED current. Each step is approximately 200 microamps.
+    minimum: 0
+    maximum: 50800
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max30100
+    then:
+      properties:
+        maxim,green-led-current-microamp: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        heart-rate@57 {
+            compatible = "maxim,max30102";
+            reg = <0x57>;
+            maxim,red-led-current-microamp = <7000>;
+            maxim,ir-led-current-microamp = <7000>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
new file mode 100644
index 000000000000..6c5ad426a016
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/health/ti,afe4403.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AFE4403 Heart rate and Pulse Oximeter
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: ti,afe4403
+
+  reg:
+    maxItems: 1
+
+  tx-supply:
+    description: Supply to transmitting LEDs.
+
+  interrupts:
+    maxItems: 1
+    description: Connected to ADC_RDY pin.
+
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        heart_mon@0 {
+            compatible = "ti,afe4403";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            tx-supply = <&vbat>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
new file mode 100644
index 000000000000..c0e815d9999e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/health/ti,afe4404.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AFE4404 Heart rate and Pulse Oximeter
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: ti,afe4404
+
+  reg:
+    maxItems: 1
+
+  tx-supply:
+    description: Supply to transmitting LEDs.
+
+  interrupts:
+    maxItems: 1
+    description: Connected to ADC_RDY pin.
+
+  reset-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        heart_mon@58 {
+            compatible = "ti,afe4404";
+            reg = <0x58>;
+            tx-supply = <&vbat>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.txt b/Documentation/devicetree/bindings/iio/humidity/dht11.txt
deleted file mode 100644
index ecc24c199fd6..000000000000
--- a/Documentation/devicetree/bindings/iio/humidity/dht11.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* DHT11 humidity/temperature sensor (and compatibles like DHT22)
-
-Required properties:
-  - compatible: Should be "dht11"
-  - gpios: Should specify the GPIO connected to the sensor's data
-    line, see "gpios property" in
-    Documentation/devicetree/bindings/gpio/gpio.txt.
-
-Example:
-
-humidity_sensor {
-	compatible = "dht11";
-	gpios = <&gpio0 6 0>;
-}
diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
new file mode 100644
index 000000000000..2247481d0203
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/dht11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DHT11 humidity + temperature sensor
+
+maintainers:
+  - Harald Geyer <harald@ccbib.org>
+
+description: |
+   A simple and low cost module providing a non standard single GPIO based
+   interface.  It is believed the part is made by aosong but don't have
+   absolute confirmation of this, or what the aosong part number is.
+
+properties:
+  compatible:
+    const: dht11
+
+  reg:
+    maxItems: 1
+
+  gpios:
+    maxItems: 1
+    description:
+      Single, interrupt capable, GPIO used to communicate with the device.
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    humidity_sensor {
+        compatible = "dht11";
+        gpios = <&gpio0 6 0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/humidity/hdc100x.txt b/Documentation/devicetree/bindings/iio/humidity/hdc100x.txt
deleted file mode 100644
index c52333bdfd19..000000000000
--- a/Documentation/devicetree/bindings/iio/humidity/hdc100x.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* HDC100x temperature + humidity sensors
-
-Required properties:
-  - compatible: Should contain one of the following:
-	ti,hdc1000
-	ti,hdc1008
-	ti,hdc1010
-	ti,hdc1050
-	ti,hdc1080
-  - reg: i2c address of the sensor
-
-Example:
-
-hdc100x@40 {
-	compatible = "ti,hdc1000";
-	reg = <0x40>;
-};
diff --git a/Documentation/devicetree/bindings/iio/humidity/hts221.txt b/Documentation/devicetree/bindings/iio/humidity/hts221.txt
deleted file mode 100644
index 84d029372260..000000000000
--- a/Documentation/devicetree/bindings/iio/humidity/hts221.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* HTS221 STM humidity + temperature sensor
-
-Required properties:
-- compatible: should be "st,hts221"
-- reg: i2c address of the sensor / spi cs line
-
-Optional properties:
-- drive-open-drain: the interrupt/data ready line will be configured
-  as open drain, which is useful if several sensors share the same
-  interrupt line. This is a boolean property.
-  If the requested interrupt is configured as IRQ_TYPE_LEVEL_HIGH or
-  IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line
-  when it is not active, whereas a pull-up one is needed when interrupt
-  line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING.
-  Refer to pinctrl/pinctrl-bindings.txt for the property description.
-- interrupts: interrupt mapping for IRQ. It should be configured with
-  flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
-  IRQ_TYPE_EDGE_FALLING.
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt
-  client node bindings.
-
-Example:
-
-hts221@5f {
-	compatible = "st,hts221";
-	reg = <0x5f>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <0 IRQ_TYPE_EDGE_RISING>;
-};
diff --git a/Documentation/devicetree/bindings/iio/humidity/htu21.txt b/Documentation/devicetree/bindings/iio/humidity/htu21.txt
deleted file mode 100644
index 97d79636f7ae..000000000000
--- a/Documentation/devicetree/bindings/iio/humidity/htu21.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-*HTU21 - Measurement-Specialties htu21 temperature & humidity sensor and humidity part of MS8607 sensor
-
-Required properties:
-
-	- compatible: should be "meas,htu21" or "meas,ms8607-humidity"
-	- reg: I2C address of the sensor
-
-Example:
-
-htu21@40 {
-	compatible = "meas,htu21";
-	reg = <0x40>;
-};
diff --git a/Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml b/Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml
new file mode 100644
index 000000000000..598473df74fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/st,hts221.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HTS221 STM humidity + temperature sensor
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description: |
+   Humidity and temperature sensor with I2C interface and data ready
+   interrupt.
+
+properties:
+  compatible:
+    const: st,hts221
+
+  reg:
+    maxItems: 1
+
+  drive-open-drain:
+    type: boolean
+    description:
+      The interrupt/data ready line will be configured as open drain, which
+      is useful if several sensors share the same interrupt line.
+
+  vdd-supply: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hts221@5f {
+            compatible = "st,hts221";
+            reg = <0x5f>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
new file mode 100644
index 000000000000..88384b69f917
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/ti,hdc2010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDC2010/HDC2080 humidity and temperature iio sensors
+
+maintainers:
+  - Eugene Zaikonnikov <ez@norophonic.com>
+
+description: |
+  Relative humidity and tempereature sensors on I2C bus
+
+  Datasheets are available at:
+    http://www.ti.com/product/HDC2010/datasheet
+    http://www.ti.com/product/HDC2080/datasheet
+
+properties:
+  compatible:
+    enum:
+      - ti,hdc2010
+      - ti,hdc2080
+
+  vdd-supply: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      humidity@40 {
+          compatible = "ti,hdc2010";
+          reg = <0x40>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
deleted file mode 100644
index af33267727f4..000000000000
--- a/Documentation/devicetree/bindings/iio/iio-bindings.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-This binding is derived from clock bindings, and based on suggestions
-from Lars-Peter Clausen [1].
-
-Sources of IIO channels can be represented by any node in the device
-tree. Those nodes are designated as IIO providers. IIO consumer
-nodes use a phandle and IIO specifier pair to connect IIO provider
-outputs to IIO inputs. Similar to the gpio specifiers, an IIO
-specifier is an array of one or more cells identifying the IIO
-output on a device. The length of an IIO specifier is defined by the
-value of a #io-channel-cells property in the IIO provider node.
-
-[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
-
-==IIO providers==
-
-Required properties:
-#io-channel-cells: Number of cells in an IIO specifier; Typically 0 for nodes
-		   with a single IIO output and 1 for nodes with multiple
-		   IIO outputs.
-
-Optional properties:
-label:		   A symbolic name for the device.
-
-
-Example for a simple configuration with no trigger:
-
-	adc: voltage-sensor@35 {
-		compatible = "maxim,max1139";
-		reg = <0x35>;
-		#io-channel-cells = <1>;
-		label = "voltage_feedback_group1";
-	};
-
-Example for a configuration with trigger:
-
-	adc@35 {
-		compatible = "some-vendor,some-adc";
-		reg = <0x35>;
-
-		adc1: iio-device@0 {
-			#io-channel-cells = <1>;
-			/* other properties */
-		};
-		adc2: iio-device@1 {
-			#io-channel-cells = <1>;
-			/* other properties */
-		};
-	};
-
-==IIO consumers==
-
-Required properties:
-io-channels:	List of phandle and IIO specifier pairs, one pair
-		for each IIO input to the device. Note: if the
-		IIO provider specifies '0' for #io-channel-cells,
-		then only the phandle portion of the pair will appear.
-
-Optional properties:
-io-channel-names:
-		List of IIO input name strings sorted in the same
-		order as the io-channels property. Consumers drivers
-		will use io-channel-names to match IIO input names
-		with IIO specifiers.
-io-channel-ranges:
-		Empty property indicating that child nodes can inherit named
-		IIO channels from this node. Useful for bus nodes to provide
-		and IIO channel to their children.
-
-For example:
-
-	device {
-		io-channels = <&adc 1>, <&ref 0>;
-		io-channel-names = "vcc", "vdd";
-	};
-
-This represents a device with two IIO inputs, named "vcc" and "vdd".
-The vcc channel is connected to output 1 of the &adc device, and the
-vdd channel is connected to output 0 of the &ref device.
-
-==Example==
-
-	adc: max1139@35 {
-		compatible = "maxim,max1139";
-		reg = <0x35>;
-		#io-channel-cells = <1>;
-	};
-
-	...
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>,
-			<&adc 3>, <&adc 4>, <&adc 5>,
-			<&adc 6>, <&adc 7>, <&adc 8>,
-			<&adc 9>;
-	};
-
-	some_consumer {
-		compatible = "some-consumer";
-		io-channels = <&adc 10>, <&adc 11>;
-		io-channel-names = "adc1", "adc2";
-	};
diff --git a/Documentation/devicetree/bindings/iio/impedance-analyzer/ad5933.txt b/Documentation/devicetree/bindings/iio/impedance-analyzer/ad5933.txt
deleted file mode 100644
index 5ff38728ff91..000000000000
--- a/Documentation/devicetree/bindings/iio/impedance-analyzer/ad5933.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Analog Devices AD5933/AD5934 Impedance Converter, Network Analyzer
-
-https://www.analog.com/media/en/technical-documentation/data-sheets/AD5933.pdf
-https://www.analog.com/media/en/technical-documentation/data-sheets/AD5934.pdf
-
-Required properties:
- - compatible : should be one of
-		"adi,ad5933"
-		"adi,ad5934"
- - reg : the I2C address.
- - vdd-supply : The regulator supply for DVDD, AVDD1 and AVDD2 when they
-   are connected together.
-
-Optional properties:
-- clocks : external clock reference.
-- clock-names : must be "mclk" if clocks is set.
-
-Example for a I2C device node:
-
-	impedance-analyzer@0d {
-		compatible = "adi,adxl345";
-		reg = <0x0d>;
-		vdd-supply = <&vdd_supply>;
-		clocks = <&ref_clk>;
-		clock-names = "mclk";
-	};
diff --git a/Documentation/devicetree/bindings/iio/impedance-analyzer/adi,ad5933.yaml b/Documentation/devicetree/bindings/iio/impedance-analyzer/adi,ad5933.yaml
new file mode 100644
index 000000000000..2ad043554b9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/impedance-analyzer/adi,ad5933.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/impedance-analyzer/adi,ad5933.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5933/AD5934 Impedance Converter, Network Analyzer
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt1@gmail.com>
+  - Gabriel Capella <gabriel@capella.pro>
+
+description: |
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD5933.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD5934.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5933
+      - adi,ad5934
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: |
+      The regulator supply for DVDD, AVDD1 and AVDD2 when they
+      are connected together.  Used to calculate voltage scaling of measurement
+      channels.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        impedance-analyzer@d {
+            compatible = "adi,ad5933";
+            reg = <0x0d>;
+            vdd-supply = <&vdd_supply>;
+            clocks = <&ref_clk>;
+            clock-names = "mclk";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
index 0c53009ba7d6..d166dbca18c3 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -33,6 +33,11 @@ required:
   - reg
   - interrupts
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
new file mode 100644
index 000000000000..a7574210175a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/adi,adis16475.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIS16475 and similar IMUs
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices ADIS16475 and similar IMUs
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADIS16475.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16475-1
+      - adi,adis16475-2
+      - adi,adis16475-3
+      - adi,adis16477-1
+      - adi,adis16477-2
+      - adi,adis16477-3
+      - adi,adis16470
+      - adi,adis16465-1
+      - adi,adis16465-2
+      - adi,adis16465-3
+      - adi,adis16467-1
+      - adi,adis16467-2
+      - adi,adis16467-3
+      - adi,adis16500
+      - adi,adis16505-1
+      - adi,adis16505-2
+      - adi,adis16505-3
+      - adi,adis16507-1
+      - adi,adis16507-2
+      - adi,adis16507-3
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Must be the device tree identifier of the RESET pin. If specified,
+      it will be asserted during driver probe. As the line is active low,
+      it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  adi,sync-mode:
+    description:
+      Configures the device SYNC pin. The following modes are supported
+      0 - output_sync
+      1 - direct_sync
+      2 - scaled_sync
+      3 - pulse_sync
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-cpha
+  - spi-cpol
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adis16500
+              - adi,adis16505-1
+              - adi,adis16505-2
+              - adi,adis16505-3
+              - adi,adis16507-1
+              - adi,adis16507-2
+              - adi,adis16507-3
+
+    then:
+      properties:
+        adi,sync-mode:
+          minimum: 0
+          maximum: 2
+
+  - if:
+      properties:
+        adi,sync-mode:
+          enum: [1, 2, 3]
+
+    then:
+      dependencies:
+        adi,sync-mode: [ clocks ]
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            adis16475: adis16475-3@0 {
+                    compatible = "adi,adis16475-3";
+                    reg = <0>;
+                    spi-cpha;
+                    spi-cpol;
+                    spi-max-frequency = <2000000>;
+                    interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+                    interrupt-parent = <&gpio>;
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt
deleted file mode 100644
index cd903a1d880d..000000000000
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-
-Analog Devices ADIS16480 and similar IMUs
-
-Required properties for the ADIS16480:
-
-- compatible: Must be one of
-	* "adi,adis16375"
-	* "adi,adis16480"
-	* "adi,adis16485"
-	* "adi,adis16488"
-	* "adi,adis16490"
-	* "adi,adis16495-1"
-	* "adi,adis16495-2"
-	* "adi,adis16495-3"
-	* "adi,adis16497-1"
-	* "adi,adis16497-2"
-	* "adi,adis16497-3"
-- reg: SPI chip select number for the device
-- spi-max-frequency: Max SPI frequency to use
-	see: Documentation/devicetree/bindings/spi/spi-bus.txt
-- spi-cpha: See Documentation/devicetree/bindings/spi/spi-bus.txt
-- spi-cpol: See Documentation/devicetree/bindings/spi/spi-bus.txt
-- interrupts: interrupt mapping for IRQ, accepted values are:
-	* IRQF_TRIGGER_RISING
-	* IRQF_TRIGGER_FALLING
-
-Optional properties:
-
-- interrupt-names: Data ready line selection. Valid values are:
-	* DIO1
-	* DIO2
-	* DIO3
-	* DIO4
-	If this field is left empty, DIO1 is assigned as default data ready
-	signal.
-- reset-gpios: must be the device tree identifier of the RESET pin. As the line
-	is active low, it should be marked GPIO_ACTIVE_LOW.
-- clocks: phandle to the external clock. Should be set according to
-	"clock-names".
-	If this field is left empty together with the "clock-names" field, then
-	the internal clock is used.
-- clock-names: The name of the external clock to be used. Valid values are:
-	* sync: In sync mode, the internal clock is disabled and the frequency
-		of the external clock signal establishes therate of data
-		collection and processing. See Fig 14 and 15 in the datasheet.
-		The clock-frequency must be:
-		* 3000 to 4500 Hz for adis1649x devices.
-		* 700 to 2400 Hz for adis1648x devices.
-	* pps: In Pulse Per Second (PPS) Mode, the rate of data collection and
-	       production is equal to the product of the external clock
-	       frequency and the scale factor in the SYNC_SCALE register, see
-	       Table 154 in the datasheet.
-	       The clock-frequency must be:
-	       * 1 to 128 Hz for adis1649x devices.
-	       * This mode is not supported by adis1648x devices.
-	If this field is left empty together with the "clocks" field, then the
-	internal clock is used.
-- adi,ext-clk-pin: The DIOx line to be used as an external clock input.
-	Valid values are:
-	* DIO1
-	* DIO2
-	* DIO3
-	* DIO4
-	Each DIOx pin supports only one function at a time (data ready line
-	selection or external clock input). When a single pin has two
-	two assignments, the enable bit for the lower priority function
-	automatically resets to zero (disabling the lower priority function).
-	Data ready has highest priority.
-	If this field is left empty, DIO2 is assigned as default external clock
-	input pin.
-
-Example:
-
-	imu@0 {
-		compatible = "adi,adis16495-1";
-		reg = <0>;
-		spi-max-frequency = <3200000>;
-		spi-cpol;
-		spi-cpha;
-		interrupts = <25 IRQF_TRIGGER_FALLING>;
-		interrupt-parent = <&gpio>;
-		interrupt-names = "DIO2";
-		clocks = <&adis16495_sync>;
-		clock-names = "sync";
-		adi,ext-clk-pin = "DIO1";
-	};
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
new file mode 100644
index 000000000000..56e0dc20f5e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/adi,adis16480.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIS16480 and similar IMUs
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16375
+      - adi,adis16480
+      - adi,adis16485
+      - adi,adis16488
+      - adi,adis16490
+      - adi,adis16495-1
+      - adi,adis16495-2
+      - adi,adis16495-3
+      - adi,adis16497-1
+      - adi,adis16497-2
+      - adi,adis16497-3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Accepted interrupt types are:
+      * IRQ_TYPE_EDGE_RISING
+      * IRQ_TYPE_EDGE_FALLING
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    description:
+      Default if not supplied is DIO1.
+    items:
+      enum:
+        - DIO1
+        - DIO2
+        - DIO3
+        - DIO4
+
+  spi-cpha: true
+  spi-cpol: true
+
+  reset-gpios:
+    maxItems: 1
+    description: Connected to RESET pin which is active low.
+
+  clocks:
+    maxItems: 1
+    description: If not provided, then the internal clock is used.
+
+  clock-names:
+    description: |
+      sync: In sync mode, the internal clock is disabled and the frequency
+            of the external clock signal establishes therate of data
+            collection and processing. See Fig 14 and 15 in the datasheet.
+            The clock-frequency must be:
+            * 3000 to 4500 Hz for adis1649x devices.
+            * 700 to 2400 Hz for adis1648x devices.
+      pps:  In Pulse Per Second (PPS) Mode, the rate of data collection and
+            production is equal to the product of the external clock
+            frequency and the scale factor in the SYNC_SCALE register, see
+            Table 154 in the datasheet.
+            The clock-frequency must be:
+            * 1 to 128 Hz for adis1649x devices.
+            * This mode is not supported by adis1648x devices.
+    enum:
+      - sync
+      - pps
+
+  adi,ext-clk-pin:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      The DIOx line to be used as an external clock input.
+      Each DIOx pin supports only one function at a time (data ready line
+      selection or external clock input). When a single pin has two
+      two assignments, the enable bit for the lower priority function
+      automatically resets to zero (disabling the lower priority function).
+      Data ready has highest priority.
+      If not provided then DIO2 is assigned as default external clock
+      input pin.
+    enum:
+      - DIO1
+      - DIO2
+      - DIO3
+      - DIO4
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-cpha
+  - spi-cpol
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@0 {
+            compatible = "adi,adis16495-1";
+            reg = <0>;
+            spi-max-frequency = <3200000>;
+            spi-cpol;
+            spi-cpha;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            interrupt-names = "DIO2";
+            clocks = <&adis16495_sync>;
+            clock-names = "sync";
+            adi,ext-clk-pin = "DIO1";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.txt b/Documentation/devicetree/bindings/iio/imu/bmi160.txt
deleted file mode 100644
index 900c169de00f..000000000000
--- a/Documentation/devicetree/bindings/iio/imu/bmi160.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Bosch BMI160 - Inertial Measurement Unit with Accelerometer, Gyroscope
-and externally connectable Magnetometer
-
-https://www.bosch-sensortec.com/bst/products/all_products/bmi160
-
-Required properties:
- - compatible : should be "bosch,bmi160"
- - reg : the I2C address or SPI chip select number of the sensor
- - spi-max-frequency : set maximum clock frequency (only for SPI)
-
-Optional properties:
- - interrupts : interrupt mapping for IRQ
- - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt
-   input, set to "INT2" if INT2 pin should be used instead
- - drive-open-drain : set if the specified interrupt pin should be configured as
-   open drain. If not set, defaults to push-pull.
-
-Examples:
-
-bmi160@68 {
-	compatible = "bosch,bmi160";
-	reg = <0x68>;
-
-	interrupt-parent = <&gpio4>;
-	interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "INT1";
-};
-
-bmi160@0 {
-	compatible = "bosch,bmi160";
-	reg = <0>;
-	spi-max-frequency = <10000000>;
-
-	interrupt-parent = <&gpio2>;
-	interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
-	interrupt-names = "INT2";
-};
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
new file mode 100644
index 000000000000..a0760382548d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bmi160.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI160
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Inertial Measurement Unit with Accelerometer, Gyroscope and externally
+  connectable Magnetometer
+  https://www.bosch-sensortec.com/bst/products/all_products/bmi160
+
+properties:
+  compatible:
+    const: bosch,bmi160
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    enum:
+      - INT1
+      - INT2
+    description: |
+      set to "INT1" if INT1 pin should be used as interrupt input, set
+      to "INT2" if INT2 pin should be used instead
+
+  drive-open-drain:
+    description: |
+      set if the specified interrupt pin should be configured as
+      open drain. If not set, defaults to push-pull.
+
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+  vddio-supply:
+    description: provide VDD IO power to the sensor.
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example for I2C
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bmi160@68 {
+                compatible = "bosch,bmi160";
+                reg = <0x68>;
+                vdd-supply = <&pm8916_l17>;
+                vddio-supply = <&pm8916_l6>;
+                interrupt-parent = <&gpio4>;
+                interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+                interrupt-names = "INT1";
+                mount-matrix = "0", "1", "0",
+                               "-1", "0", "0",
+                               "0", "0", "1";
+        };
+    };
+  - |
+    // Example for SPI
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bmi160@0 {
+                compatible = "bosch,bmi160";
+                reg = <0>;
+                spi-max-frequency = <10000000>;
+                interrupt-parent = <&gpio2>;
+                interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+                interrupt-names = "INT2";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
new file mode 100644
index 000000000000..e0d06db161a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bno055.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BNO055
+
+maintainers:
+  - Andrea Merello <andrea.merello@iit.it>
+
+description: |
+  Inertial Measurement Unit with Accelerometer, Gyroscope, Magnetometer and
+  internal MCU for sensor fusion
+  https://www.bosch-sensortec.com/products/smart-sensors/bno055/
+
+properties:
+  compatible:
+    enum:
+      - bosch,bno055
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+      imu {
+        compatible = "bosch,bno055";
+        reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+        clocks = <&imu_clk>;
+      };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      imu@28 {
+        compatible = "bosch,bno055";
+        reg = <0x28>;
+        reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+        clocks = <&imu_clk>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
deleted file mode 100644
index c5ee8a20af9f..000000000000
--- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
-
-http://www.invensense.com/mems/gyro/mpu6050.html
-
-Required properties:
- - compatible : should be one of
-		"invensense,mpu6050"
- 		"invensense,mpu6500"
-		"invensense,mpu6515"
-		"invensense,mpu9150"
-		"invensense,mpu9250"
-		"invensense,mpu9255"
-		"invensense,icm20608"
-		"invensense,icm20602"
- - reg : the I2C address of the sensor
- - interrupts: interrupt mapping for IRQ. It should be configured with flags
-   IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
-   IRQ_TYPE_EDGE_FALLING.
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client node
-  bindings.
-
-Optional properties:
- - vdd-supply: regulator phandle for VDD supply
- - vddio-supply: regulator phandle for VDDIO supply
- - mount-matrix: an optional 3x3 mounting rotation matrix
- - i2c-gate node.  These devices also support an auxiliary i2c bus.  This is
-   simple enough to be described using the i2c-gate binding. See
-   i2c/i2c-gate.txt for more details.
-
-Example:
-	mpu6050@68 {
-		compatible = "invensense,mpu6050";
-		reg = <0x68>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <18 IRQ_TYPE_EDGE_RISING>;
-		mount-matrix = "-0.984807753012208",  /* x0 */
-		               "0",                   /* y0 */
-		               "-0.173648177666930",  /* z0 */
-		               "0",                   /* x1 */
-		               "-1",                  /* y1 */
-		               "0",                   /* z1 */
-		               "-0.173648177666930",  /* x2 */
-		               "0",                   /* y2 */
-		               "0.984807753012208";   /* z2 */
-	};
-
-
-	mpu9250@68 {
-		compatible = "invensense,mpu9250";
-		reg = <0x68>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
-		i2c-gate {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ax8975@c {
-				compatible = "ak,ak8975";
-				reg = <0x0c>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
new file mode 100644
index 000000000000..488349755c99
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/invensense,icm42600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: InvenSense ICM-426xx Inertial Measurement Unit
+
+maintainers:
+  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
+
+description: |
+  6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
+  accelerometer.
+
+  It has a configurable host interface that supports I3C, I2C and SPI serial
+  communication, features a 2kB FIFO and 2 programmable interrupts with
+  ultra-low-power wake-on-motion support to minimize system power consumption.
+
+  Other industry-leading features include InvenSense on-chip APEX Motion
+  Processing engine for gesture recognition, activity classification, and
+  pedometer, along with programmable digital filters, and an embedded
+  temperature sensor.
+
+  https://invensense.tdk.com/wp-content/uploads/2020/03/DS-000292-ICM-42605-v1.4.pdf
+
+properties:
+  compatible:
+    enum:
+      - invensense,icm42600
+      - invensense,icm42602
+      - invensense,icm42605
+      - invensense,icm42622
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  drive-open-drain:
+    type: boolean
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        icm42605@68 {
+          compatible = "invensense,icm42605";
+          reg = <0x68>;
+          interrupt-parent = <&gpio2>;
+          interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+          vdd-supply = <&vdd>;
+          vddio-supply = <&vddio>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        icm42602@0 {
+          compatible = "invensense,icm42602";
+          reg = <0>;
+          spi-max-frequency = <24000000>;
+          spi-cpha;
+          spi-cpol;
+          interrupt-parent = <&gpio1>;
+          interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+          vdd-supply = <&vdd>;
+          vddio-supply = <&vddio>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
new file mode 100644
index 000000000000..ec64d7877fe5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/invensense,mpu6050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
+
+maintainers:
+  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
+
+description: |
+  These devices support both I2C and SPI bus interfaces.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - invensense,iam20680
+          - invensense,icm20608
+          - invensense,icm20609
+          - invensense,icm20689
+          - invensense,icm20602
+          - invensense,icm20690
+          - invensense,mpu6000
+          - invensense,mpu6050
+          - invensense,mpu6500
+          - invensense,mpu6515
+          - invensense,mpu6880
+          - invensense,mpu9150
+          - invensense,mpu9250
+          - invensense,mpu9255
+      - items:
+          - const: invensense,icm20608d
+          - const: invensense,icm20608
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  mount-matrix: true
+
+  i2c-gate:
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+    description: |
+      These devices also support an auxiliary i2c bus via an i2c-gate.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - invensense,mpu9150
+                - invensense,mpu9250
+                - invensense,mpu9255
+    then:
+      properties:
+        i2c-gate: false
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@68 {
+            compatible = "invensense,mpu9250";
+            reg = <0x68>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+            mount-matrix = "-0.984807753012208",  /* x0 */
+                           "0",                   /* y0 */
+                           "-0.173648177666930",  /* z0 */
+                           "0",                   /* x1 */
+                           "-1",                  /* y1 */
+                           "0",                   /* z1 */
+                           "-0.173648177666930",  /* x2 */
+                           "0",                   /* y2 */
+                           "0.984807753012208";   /* z2 */
+            i2c-gate {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                magnetometer@c {
+                    compatible = "asahi-kasei,ak8975";
+                    reg = <0x0c>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index 63bcb73ae309..24416b59b782 100644
--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale FXOS8700 Inertial Measurement Unit
 
 maintainers:
-  - Robert Jones <rjones@gateworks.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   Accelerometer and magnetometer combo device with an i2c and SPI interface.
@@ -40,6 +40,11 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
new file mode 100644
index 000000000000..fe1e02e5d7b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/st,lsm6dsx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM 6-axis (acc + gyro) IMU Mems sensors
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description:
+  Devices have both I2C and SPI interfaces.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - st,lsm6ds3
+          - st,lsm6ds3h
+          - st,lsm6dsl
+          - st,lsm6dsm
+          - st,ism330dlc
+          - st,lsm6dso
+          - st,asm330lhh
+          - st,lsm6dsox
+          - st,lsm6dsr
+          - st,lsm6ds3tr-c
+          - st,ism330dhcx
+          - st,lsm9ds1-imu
+          - st,lsm6ds0
+          - st,lsm6dsrx
+          - st,lsm6dst
+          - st,lsm6dsop
+      - items:
+          - const: st,asm330lhhx
+          - const: st,lsm6dsr
+      - items:
+          - const: st,lsm6dstx
+          - const: st,lsm6dst
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description:
+      Supports up to 2 interrupt lines via the INT1 and INT2 pins.
+
+  vdd-supply:
+    description: if defined provides VDD power to the sensor.
+
+  vddio-supply:
+    description: if defined provides VDD IO power to the sensor.
+
+  st,drdy-int-pin:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: |
+      The pin on the package that will be used to signal data ready
+    enum:
+      - 1
+      - 2
+
+  st,pullups:
+    type: boolean
+    description: enable/disable internal i2c controller pullup resistors.
+
+  st,disable-sensor-hub:
+    type: boolean
+    description:
+      Enable/disable internal i2c controller slave autoprobing at bootstrap.
+      Disable sensor-hub is useful if i2c controller clock/data lines are
+      connected through a pull-up with other chip lines (e.g. SDO/SA0).
+
+  drive-open-drain:
+    type: boolean
+    description:
+      The interrupt/data ready line will be configured as open drain, which
+      is useful if several sensors share the same interrupt line.
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@6b {
+            compatible = "st,lsm6dsm";
+            reg = <0x6b>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
deleted file mode 100644
index cef4bc16fce1..000000000000
--- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* ST_LSM6DSx driver for STM 6-axis (acc + gyro) imu Mems sensors
-
-Required properties:
-- compatible: must be one of:
-  "st,lsm6ds3"
-  "st,lsm6ds3h"
-  "st,lsm6dsl"
-  "st,lsm6dsm"
-  "st,ism330dlc"
-  "st,lsm6dso"
-  "st,asm330lhh"
-  "st,lsm6dsox"
-  "st,lsm6dsr"
-  "st,lsm6ds3tr-c"
-  "st,ism330dhcx"
-  "st,lsm9ds1-imu"
-  "st,lsm6ds0"
-  "st,lsm6dsrx"
-- reg: i2c address of the sensor / spi cs line
-
-Optional properties:
-- st,drdy-int-pin: the pin on the package that will be used to signal
-  "data ready" (valid values: 1 or 2).
-- st,pullups : enable/disable internal i2c controller pullup resistors.
-- drive-open-drain: the interrupt/data ready line will be configured
-  as open drain, which is useful if several sensors share the same
-  interrupt line. This is a boolean property.
-  (This binding is taken from pinctrl/pinctrl-bindings.txt)
-  If the requested interrupt is configured as IRQ_TYPE_LEVEL_HIGH or
-  IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line
-  when it is not active, whereas a pull-up one is needed when interrupt
-  line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING.
-- interrupts: interrupt mapping for IRQ. It should be configured with
-  flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
-  IRQ_TYPE_EDGE_FALLING.
-- wakeup-source: Enables wake up of host system on event.
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt
-  client node bindings.
-
-Example:
-
-lsm6dsm@6b {
-	compatible = "st,lsm6dsm";
-	reg = <0x6b>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <0 IRQ_TYPE_EDGE_RISING>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.yaml b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
index 69bd5c06319d..d7d14f2f1c20 100644
--- a/Documentation/devicetree/bindings/iio/light/adux1020.yaml
+++ b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
@@ -28,6 +28,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
new file mode 100644
index 000000000000..0e8cd02759b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+
+maintainers:
+  - Christian Eggers <ceggers@arri.de>
+
+description: |
+  XYZ True Color Sensor with I2C Interface
+  https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
+
+properties:
+  compatible:
+    enum:
+      - ams,as73211
+
+  reg:
+    description:
+      I2C address of the device (0x74...0x77).
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt specifier for the READY interrupt generated by the device.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        as73211@74 {
+            compatible = "ams,as73211";
+            reg = <0x74>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_color_sensor>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <19 IRQ_TYPE_EDGE_RISING>; /* READY */
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
new file mode 100644
index 000000000000..60e76bc035a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/amstaos,tsl2563.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS TAOS TSL2563 ambient light sensor
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Ambient light sensor with an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - amstaos,tsl2560
+      - amstaos,tsl2561
+      - amstaos,tsl2562
+      - amstaos,tsl2563
+
+  reg:
+    maxItems: 1
+
+  amstaos,cover-comp-gain:
+    description: Multiplier for gain compensation
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 16]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@29 {
+        compatible = "amstaos,tsl2563";
+        reg = <0x29>;
+        amstaos,cover-comp-gain = <16>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml
new file mode 100644
index 000000000000..83b88c6a243d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/amstaos,tsl2591.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS/TAOS TSL2591 Ambient Light Sensor (ALS)
+
+maintainers:
+  - Joe Sandom <joe.g.sandom@gmail.com>
+
+description: |
+  AMS/TAOS TSL2591 is a very-high sensitivity
+  light-to-digital converter that transforms light intensity into a digital
+  signal.
+
+properties:
+  compatible:
+    const: amstaos,tsl2591
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      Interrupt (INT:Pin 2) Active low. Should be set to IRQ_TYPE_EDGE_FALLING.
+      interrupt is used to detect if the light intensity has fallen below
+      or reached above the configured threshold values.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tsl2591@29 {
+            compatible = "amstaos,tsl2591";
+            reg = <0x29>;
+            interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+       };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
deleted file mode 100644
index aa199e09a493..000000000000
--- a/Documentation/devicetree/bindings/iio/light/apds9300.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Avago APDS9300 ambient light sensor
-
-http://www.avagotech.com/docs/AV02-1077EN
-
-Required properties:
-
-  - compatible : should be "avago,apds9300"
-  - reg : the I2C address of the sensor
-
-Optional properties:
-
-  - interrupts : interrupt mapping for GPIO IRQ
-
-Example:
-
-apds9300@39 {
-	compatible = "avago,apds9300";
-	reg = <0x39>;
-	interrupt-parent = <&gpio2>;
-	interrupts = <29 8>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt
deleted file mode 100644
index 3af325ad194b..000000000000
--- a/Documentation/devicetree/bindings/iio/light/apds9960.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Avago APDS9960 gesture/RGB/ALS/proximity sensor
-
-http://www.avagotech.com/docs/AV02-4191EN
-
-Required properties:
-
-  - compatible: must be "avago,apds9960"
-  - reg: the I2c address of the sensor
-  - interrupts : the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client
-  node bindings.
-
-Example:
-
-apds9960@39 {
-	compatible = "avago,apds9960";
-	reg = <0x39>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 1>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml
new file mode 100644
index 000000000000..206af44f2c43
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/avago,apds9300.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Avago APDS9300 ambient light sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Datasheet at https://www.avagotech.com/docs/AV02-1077EN
+
+properties:
+  compatible:
+    const: avago,apds9300
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@39 {
+            compatible = "avago,apds9300";
+            reg = <0x39>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <29 8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml
new file mode 100644
index 000000000000..f06e0fda5629
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/avago,apds9960.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Avago APDS9960 gesture/RGB/ALS/proximity sensor
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description: |
+  Datasheet at https://www.avagotech.com/docs/AV02-4191EN
+
+properties:
+  compatible:
+    const: avago,apds9960
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@39 {
+            compatible = "avago,apds9960";
+            reg = <0x39>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
index 1cc60d7ecfa0..1a88b3c253d5 100644
--- a/Documentation/devicetree/bindings/iio/light/bh1750.yaml
+++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
@@ -28,6 +28,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml b/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml
new file mode 100644
index 000000000000..c63b79c3351b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/capella,cm3605.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Capella Microsystems CM3605 Ambient Light and Short Distance Proximity Sensor
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Kevin Tsai <ktsai@capellamicro.com>
+
+description: |
+  The CM3605 is an entirely analog part. However, it requires quite a bit of
+  software logic to interface a host operating system.
+
+  This ALS and proximity sensor was one of the very first deployed in mobile
+  handsets, notably it is used in the very first Nexus One Android phone from
+  2010.
+
+properties:
+  compatible:
+    const: capella,cm3605
+
+  aset-gpios:
+    maxItems: 1
+    description:
+      ASET line (drive low to activate the ALS, should be flagged
+      GPIO_ACTIVE_LOW)
+
+  interrupts:
+    maxItems: 1
+    description:
+      Connected to the POUT (proximity sensor out) line. The edge
+      detection must be set to IRQ_TYPE_EDGE_BOTH so as to detect
+      movements toward and away from the proximity sensor.
+
+  io-channels:
+    maxItems: 1
+    description:
+      ADC channel used for converting the voltage from AOUT to a digital
+      representation.
+
+  io-channel-names:
+    const: aout
+
+  vdd-supply: true
+
+  capella,aset-resistance-ohms:
+    enum: [50000, 100000, 300000, 600000]
+    description: >
+      Sensitivity calibration resistance. Note that calibration curves
+      are only provided for specific allowed values. Default: 100 kOhms.
+
+required:
+  - compatible
+  - aset-gpios
+  - interrupts
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    light-sensor {
+        compatible = "capella,cm3605";
+        vdd-supply = <&foo_reg>;
+        aset-gpios = <&foo_gpio 1 GPIO_ACTIVE_LOW>;
+        capella,aset-resistance-ohms = <100000>;
+        interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
+        io-channels = <&adc 0x01>;
+        io-channel-names = "aout";
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/capella,cm36651.yaml b/Documentation/devicetree/bindings/iio/light/capella,cm36651.yaml
new file mode 100644
index 000000000000..446d94f3a89f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/capella,cm36651.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/capella,cm36651.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Capella CM36651 I2C Proximity and Color Light sensor
+
+maintainers:
+  - Beomho Seo <beomho.seo@samsung.com>
+
+properties:
+  compatible:
+    const: capella,cm36651
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vled-supply:
+    description: |
+      Supply for the IR_LED which is part of the cm36651 for proximity detection.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vled-supply
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@18 {
+            compatible = "capella,cm36651";
+            reg = <0x18>;
+            interrupt-parent = <&gpx0>;
+            interrupts = <2 0>;
+            vled-supply = <&ps_als_reg>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/cm3605.txt b/Documentation/devicetree/bindings/iio/light/cm3605.txt
deleted file mode 100644
index 56331a79f9ab..000000000000
--- a/Documentation/devicetree/bindings/iio/light/cm3605.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Capella Microsystems CM3605
-Ambient Light and Short Distance Proximity Sensor
-
-The CM3605 is an entirely analog part which however require quite a bit of
-software logic to interface a host operating system.
-
-This ALS and proximity sensor was one of the very first deployed in mobile
-handsets, notably it is used in the very first Nexus One Android phone from
-2010.
-
-Required properties:
-- compatible: must be: "capella,cm3605"
-- aset-gpios: GPIO line controlling the ASET line (drive low
-  to activate the ALS, should be flagged GPIO_ACTIVE_LOW)
-- interrupts: the IRQ line (such as a GPIO) that is connected to
-  the POUT (proximity sensor out) line. The edge detection must
-  be set to IRQ_TYPE_EDGE_BOTH so as to detect movements toward
-  and away from the proximity sensor.
-- io-channels: the ADC channel used for converting the voltage from
-  AOUT to a digital representation.
-- io-channel-names: must be "aout"
-
-Optional properties:
-- vdd-supply: regulator supplying VDD power to the component.
-- capella,aset-resistance-ohms: the sensitivity calibration resistance,
-  in Ohms. Valid values are: 50000, 100000, 300000 and 600000,
-  as these are the resistance values that we are supplied with
-  calibration curves for. If not supplied, 100 kOhm will be assumed
-  but it is strongly recommended to supply this.
-
-Example:
-
-cm3605 {
-	compatible = "capella,cm3605";
-	vdd-supply = <&foo_reg>;
-	aset-gpios = <&foo_gpio 1 GPIO_ACTIVE_LOW>;
-	capella,aset-resistance-ohms = <100000>;
-	interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
-	io-channels = <&adc 0x01>;
-	io-channel-names = "aout";
-};
diff --git a/Documentation/devicetree/bindings/iio/light/cm36651.txt b/Documentation/devicetree/bindings/iio/light/cm36651.txt
deleted file mode 100644
index c03e19db4550..000000000000
--- a/Documentation/devicetree/bindings/iio/light/cm36651.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Capella CM36651 I2C Proximity and Color Light sensor
-
-Required properties:
-- compatible: must be "capella,cm36651"
-- reg: the I2C address of the device
-- interrupts: interrupt-specifier for the sole interrupt
-	      generated by the device
-- vled-supply: regulator for the IR LED. IR_LED is a part
-	      of the cm36651 for proximity detection.
-	      As covered in ../../regulator/regulator.txt
-
-Example:
-
-	i2c_cm36651: i2c-gpio {
-		/* ... */
-
-		cm36651@18 {
-			compatible = "capella,cm36651";
-			reg = <0x18>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <2 0>;
-			vled-supply = <&ps_als_reg>;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
new file mode 100644
index 000000000000..a3a979553e32
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/dynaimage,al3010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dyna-Image AL3010 sensor
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+
+properties:
+  compatible:
+    const: dynaimage,al3010
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@1c {
+            compatible = "dynaimage,al3010";
+            reg = <0x1c>;
+            vdd-supply = <&vdd_reg>;
+            interrupts = <0 99 4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml
new file mode 100644
index 000000000000..8249be99cff9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/dynaimage,al3320a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dyna-Image AL3320A sensor
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+
+properties:
+  compatible:
+    const: dynaimage,al3320a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@1c {
+            compatible = "dynaimage,al3320a";
+            reg = <0x1c>;
+            vdd-supply = <&vdd_reg>;
+            interrupts = <0 99 4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt b/Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt
deleted file mode 100644
index 9231c82317ad..000000000000
--- a/Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Sharp GP2AP020A00F I2C Proximity/ALS sensor
-
-The proximity detector sensor requires power supply
-for its built-in led. It is also defined by this binding.
-
-Required properties:
-
-  - compatible : should be "sharp,gp2ap020a00f"
-  - reg : the I2C slave address of the light sensor
-  - interrupts : interrupt specifier for the sole interrupt generated
-		 by the device
-  - vled-supply : VLED power supply, as covered in ../regulator/regulator.txt
-
-Example:
-
-gp2ap020a00f@39 {
-	compatible = "sharp,gp2ap020a00f";
-	reg = <0x39>;
-	interrupts = <2 0>;
-	vled-supply = <...>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
index cbb00be8f359..0ea278b07d1c 100644
--- a/Documentation/devicetree/bindings/iio/light/isl29018.yaml
+++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
@@ -38,6 +38,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
new file mode 100644
index 000000000000..c8074f180a79
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltr501.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteON LTR501 I2C Proximity and Light sensor
+
+maintainers:
+  - Nikita Travkin <nikita@trvn.ru>
+
+allOf:
+  - $ref: ../common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - liteon,ltr501
+      - liteon,ltr559
+      - liteon,ltr301
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  proximity-near-level: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@23 {
+            compatible = "liteon,ltr559";
+            reg = <0x23>;
+            proximity-near-level = <75>;
+
+            vdd-supply = <&pm8916_l17>;
+            vddio-supply = <&pm8916_l6>;
+
+            interrupt-parent = <&msmgpio>;
+            interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
new file mode 100644
index 000000000000..7de1b0e721ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTRF216A Ambient Light Sensor
+
+maintainers:
+  - Shreeya Patel <shreeya.patel@collabora.com>
+
+description:
+  Ambient light sensing with an i2c interface.
+
+properties:
+  compatible:
+    const: liteon,ltrf216a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@53 {
+            compatible = "liteon,ltrf216a";
+            reg = <0x53>;
+            vdd-supply = <&vdd_regulator>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/max44009.txt b/Documentation/devicetree/bindings/iio/light/max44009.txt
deleted file mode 100644
index 4a98848e35c0..000000000000
--- a/Documentation/devicetree/bindings/iio/light/max44009.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* MAX44009 Ambient Light Sensor
-
-Required properties:
-
-- compatible: should be "maxim,max44009"
-- reg: the I2C address of the device (default is <0x4a>)
-
-Optional properties:
-
-- interrupts: interrupt mapping for GPIO IRQ. Should be configured with
-  IRQ_TYPE_EDGE_FALLING.
-
-Refer to interrupt-controller/interrupts.txt for generic interrupt client
-node bindings.
-
-Example:
-
-light-sensor@4a {
-	compatible = "maxim,max44009";
-	reg = <0x4a>;
-
-	interrupt-parent = <&gpio1>;
-	interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/maxim,max44009.yaml b/Documentation/devicetree/bindings/iio/light/maxim,max44009.yaml
new file mode 100644
index 000000000000..5911bd93bcb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/maxim,max44009.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/maxim,max44009.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX44009 Ambient Light Sensor
+
+maintainers:
+  - Robert Eshleman <bobbyeshleman@gmail.com>
+
+properties:
+  compatible:
+    const: maxim,max44009
+
+  reg:
+    maxItems: 1
+    description: Default address is 0x4a
+
+  interrupts:
+    maxItems: 1
+    description: Should be configured with type IRQ_TYPE_EDGE_FALLING
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@4a {
+            compatible = "maxim,max44009";
+            reg = <0x4a>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/noa1305.yaml b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
index 17e7f140b69b..fe7bfe1adbda 100644
--- a/Documentation/devicetree/bindings/iio/light/noa1305.yaml
+++ b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
@@ -29,6 +29,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
deleted file mode 100644
index 47b13eb8f4ec..000000000000
--- a/Documentation/devicetree/bindings/iio/light/opt3001.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Texas Instruments OPT3001 Ambient Light Sensor
-
-The driver supports interrupt-driven and interrupt-less operation, depending
-on whether an interrupt property has been populated into the DT. Note that
-the optional generation of IIO events on rising/falling light threshold changes
-requires the use of interrupts. Without interrupts, only the simple reading
-of the current light value is supported through the IIO API.
-
-http://www.ti.com/product/opt3001
-
-Required properties:
-  - compatible: should be "ti,opt3001"
-  - reg: the I2C address of the sensor
-
-Optional properties:
-  - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge)
-
-Example:
-
-opt3001@44 {
-	compatible = "ti,opt3001";
-	reg = <0x44>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/renesas,isl29501.txt b/Documentation/devicetree/bindings/iio/light/renesas,isl29501.txt
deleted file mode 100644
index 46957997fee3..000000000000
--- a/Documentation/devicetree/bindings/iio/light/renesas,isl29501.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* ISL29501 Time-of-flight sensor.
-
-Required properties:
-
-  - compatible : should be "renesas,isl29501"
-  - reg : the I2C address of the sensor
-
-Example:
-
-isl29501@57 {
-	compatible = "renesas,isl29501";
-	reg = <0x57>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml
new file mode 100644
index 000000000000..f8a932be0d10
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/sharp,gp2ap002.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp GP2AP002A00F and GP2AP002S00F proximity and ambient light sensors
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Proximity and ambient light sensor with IR LED for the proximity
+  sensing and an analog output for light intensity. The ambient light
+  sensor output is not available on the GP2AP002S00F variant.
+
+properties:
+  compatible:
+    enum:
+      - sharp,gp2ap002a00f
+      - sharp,gp2ap002s00f
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: an interrupt for proximity, usually a GPIO line
+
+  vdd-supply:
+    description: VDD power supply a phandle to a regulator
+
+  vio-supply:
+    description: VIO power supply a phandle to a regulator
+
+  io-channels:
+    maxItems: 1
+    description: ALSOUT ADC channel to read the ambient light
+
+  io-channel-names:
+    const: alsout
+
+  sharp,proximity-far-hysteresis:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Hysteresis setting for "far" object detection, this setting is
+      device-unique and adjust the optical setting for proximity detection
+      of a "far away" object in front of the sensor.
+
+  sharp,proximity-close-hysteresis:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Hysteresis setting for "close" object detection, this setting is
+      device-unique and adjust the optical setting for proximity detection
+      of a "close" object in front of the sensor.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - sharp,proximity-far-hysteresis
+  - sharp,proximity-close-hysteresis
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@44 {
+        compatible = "sharp,gp2ap002a00f";
+        reg = <0x44>;
+        interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+        vdd-supply = <&vdd_regulator>;
+        vio-supply = <&vio_regulator>;
+        io-channels = <&adc_channel>;
+        io-channel-names = "alsout";
+        sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>;
+        sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap020a00f.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap020a00f.yaml
new file mode 100644
index 000000000000..3fabf1f576cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap020a00f.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/sharp,gp2ap020a00f.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp GP2AP020A00F I2C Proximity/ALS sensor
+
+maintainers:
+  - Kyungmin Park <kyungmin.park@samsung.com>
+
+description: |
+  The proximity detector sensor requires power supply for its built-in led.
+
+properties:
+  compatible:
+    const: sharp,gp2ap020a00f
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vled-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vled-supply
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@39 {
+            compatible = "sharp,gp2ap020a00f";
+            reg = <0x39>;
+            interrupts = <2 0>;
+            vled-supply = <&als_reg>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/st,uvis25.yaml b/Documentation/devicetree/bindings/iio/light/st,uvis25.yaml
new file mode 100644
index 000000000000..c86e5e1d135e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/st,uvis25.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/st,uvis25.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST UVIS25 uv sensor
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+
+properties:
+  compatible:
+    const: st,uvis25
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        uv-sensor@47 {
+            compatible = "st,uvis25";
+            reg = <0x47>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/st,vl6180.yaml b/Documentation/devicetree/bindings/iio/light/st,vl6180.yaml
new file mode 100644
index 000000000000..27c36ab7990d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/st,vl6180.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/st,vl6180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicro VL6180 ALS, range and proximity sensor
+
+maintainers:
+  - Manivannan Sadhasivam <manivannanece23@gmail.com>
+  - Peter Meerwald-Stadler <pmeerw@pmeerw.net>
+
+description: |
+  Proximity sensing module incorporating time of flight sensor
+  Datasheet at https://www.st.com/resource/en/datasheet/vl6180x.pdf
+
+properties:
+  compatible:
+    const: st,vl6180
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@29 {
+            compatible = "st,vl6180";
+            reg = <0x29>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
index aae8a6d627c9..f6e22dc9814a 100644
--- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
+++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
@@ -13,6 +13,9 @@ maintainers:
 description: |
   Ambient light and proximity sensor over an i2c interface.
 
+allOf:
+  - $ref: ../common.yaml#
+
 properties:
   compatible:
     enum:
@@ -26,10 +29,14 @@ properties:
   interrupts:
     maxItems: 1
 
+  proximity-near-level: true
+
 required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -42,6 +49,7 @@ examples:
         stk3310@48 {
                 compatible = "sensortek,stk3310";
                 reg = <0x48>;
+                proximity-near-level = <25>;
                 interrupt-parent = <&gpio1>;
                 interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
         };
diff --git a/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml b/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml
new file mode 100644
index 000000000000..441e9343fc97
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ti,opt3001.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments OPT3001 Ambient Light Sensor
+
+maintainers:
+  - Andreas Dannenberg <dannenberg@ti.com>
+
+description: |
+  The device supports interrupt-driven and interrupt-less operation, depending
+  on whether an interrupt property has been populated into the DT.
+
+properties:
+  compatible:
+    const: ti,opt3001
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Should be configured with type IRQ_TYPE_EDGE_FALLING
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@44 {
+            compatible = "ti,opt3001";
+            reg = <0x44>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2563.txt b/Documentation/devicetree/bindings/iio/light/tsl2563.txt
deleted file mode 100644
index f91e809e736e..000000000000
--- a/Documentation/devicetree/bindings/iio/light/tsl2563.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* AMS TAOS TSL2563 ambient light sensor
-
-Required properties:
-
-  - compatible : should be "amstaos,tsl2563"
-  - reg : the I2C address of the sensor
-
-Optional properties:
-
-  - amstaos,cover-comp-gain : integer used as multiplier for gain
-                              compensation (default = 1)
-
-Example:
-
-tsl2563@29 {
-	compatible = "amstaos,tsl2563";
-	reg = <0x29>;
-	amstaos,cover-comp-gain = <16>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
index e86ef64ecf03..7b92ba8cbb9f 100644
--- a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
+++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
@@ -32,6 +32,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
index ed2c3d5eadf5..d81229857944 100644
--- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
+++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
@@ -33,13 +33,12 @@ properties:
 
   amstaos,proximity-diodes:
     description: Proximity diodes to enable
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 2
-        items:
-          minimum: 0
-          maximum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 1
 
   interrupts:
     maxItems: 1
@@ -62,6 +61,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml
new file mode 100644
index 000000000000..dd78abe0ec8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/upisemi,us5182.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UPISEMI us5182d I2C ALS and Proximity sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: upisemi,usd5182
+
+  reg:
+    maxItems: 1
+
+  upisemi,glass-coef:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      glass attenuation factor - compensation factor of resolution 1000
+      for material transmittance.
+    default: 1000
+
+  upisemi,dark-ths:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    minItems: 8
+    maxItems: 8
+    description:
+      16-bit thresholds (adc counts) corresponding to every scale.
+
+  upisemi,upper-dark-gain:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      8-bit dark gain compensation factor(4 int and 4 fractional bits - Q4.4)
+      applied when light > threshold.
+    default: 0
+
+  upisemi,lower-dark-gain:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      8-bit dark gain compensation factor(4 int and 4 fractional bits - Q4.4)
+      applied when light < threshold.
+    default: 0x16
+
+  upisemi,continuous:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      This chip has two power modes: one-shot (chip takes one measurement and
+      then shuts itself down) and continuous (chip takes continuous
+      measurements). The one-shot mode is more power-friendly but the
+      continuous mode may be more reliable. If this property is specified
+      the continuous mode will be used instead of the default one-shot one for
+      raw reads.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@39 {
+            compatible = "upisemi,usd5182";
+            reg = <0x39>;
+            upisemi,glass-coef = < 1000 >;
+            upisemi,dark-ths = /bits/ 16 <170 200 512 512 800 2000 4000 8000>;
+            upisemi,upper-dark-gain = /bits/ 8 <0x00>;
+            upisemi,lower-dark-gain = /bits/ 8 <0x16>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/us5182d.txt b/Documentation/devicetree/bindings/iio/light/us5182d.txt
deleted file mode 100644
index a61979997f37..000000000000
--- a/Documentation/devicetree/bindings/iio/light/us5182d.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* UPISEMI us5182d I2C ALS and Proximity sensor
-
-Required properties:
-- compatible: must be "upisemi,usd5182"
-- reg: the I2C address of the device
-
-Optional properties:
-- upisemi,glass-coef: glass attenuation factor - compensation factor of
-                      resolution 1000 for material transmittance.
-
-- upisemi,dark-ths: array of 8 elements containing 16-bit thresholds (adc
-                    counts) corresponding to every scale.
-
-- upisemi,upper-dark-gain: 8-bit dark gain compensation factor(4 int and 4
-                           fractional bits - Q4.4) applied when light > threshold
-
-- upisemi,lower-dark-gain: 8-bit dark gain compensation factor(4 int and 4
-                           fractional bits - Q4.4) applied when light < threshold
-
-- upisemi,continuous: This chip has two power modes: one-shot (chip takes one
-                      measurement and then shuts itself down) and continuous (
-                      chip takes continuous measurements). The one-shot mode is
-                      more power-friendly but the continuous mode may be more
-                      reliable. If this property is specified the continuous
-                      mode will be used instead of the default one-shot one for
-                      raw reads.
-
-If the optional properties are not specified these factors will default to the
-values in the below example.
-The glass-coef defaults to no compensation for the covering material.
-The threshold array defaults to experimental values that work with US5182D
-sensor on evaluation board - roughly between 12-32 lux.
-There will be no dark-gain compensation by default when ALS > thresh
-(0 * dark-gain), and a 1.35 compensation factor when ALS < thresh.
-
-Example:
-
-    usd5182@39 {
-                compatible = "upisemi,usd5182";
-                reg = <0x39>;
-                upisemi,glass-coef = < 1000 >;
-                upisemi,dark-ths = /bits/ 16 <170 200 512 512 800 2000 4000 8000>;
-                upisemi,upper-dark-gain = /bits/ 8 <0x00>;
-                upisemi,lower-dark-gain = /bits/ 8 <0x16>;
-    };
diff --git a/Documentation/devicetree/bindings/iio/light/uvis25.txt b/Documentation/devicetree/bindings/iio/light/uvis25.txt
deleted file mode 100644
index 043c139d91e6..000000000000
--- a/Documentation/devicetree/bindings/iio/light/uvis25.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* ST UVIS25 uv sensor
-
-Required properties:
-- compatible: should be "st,uvis25"
-- reg: i2c address of the sensor / spi cs line
-
-Optional properties:
-- interrupts: interrupt mapping for IRQ. It should be configured with
-  flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
-  IRQ_TYPE_EDGE_FALLING.
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt
-  client node bindings.
-
-Example:
-
-uvis25@47 {
-	compatible = "st,uvis25";
-	reg = <0x47>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <0 IRQ_TYPE_EDGE_RISING>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/vcnl4000.txt b/Documentation/devicetree/bindings/iio/light/vcnl4000.txt
deleted file mode 100644
index 955af4555c90..000000000000
--- a/Documentation/devicetree/bindings/iio/light/vcnl4000.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-VISHAY VCNL4000 -  Ambient Light and proximity sensor
-
-This driver supports the VCNL4000/10/20/40 and VCNL4200 chips
-
-Required properties:
-
-	-compatible: must be one of :
-        vishay,vcnl4000
-        vishay,vcnl4010
-        vishay,vcnl4020
-        vishay,vcnl4040
-        vishay,vcnl4200
-
-	-reg: I2C address of the sensor, should be one from below based on the model:
-        0x13
-        0x51
-        0x60
-
-Example:
-
-light-sensor@51 {
-	compatible = "vishay,vcnl4200";
-	reg = <0x51>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/vcnl4035.txt b/Documentation/devicetree/bindings/iio/light/vcnl4035.txt
deleted file mode 100644
index c07c7f052556..000000000000
--- a/Documentation/devicetree/bindings/iio/light/vcnl4035.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-VISHAY VCNL4035 -  Ambient Light and proximity sensor
-
-Link to datasheet: https://www.vishay.com/docs/84251/vcnl4035x01.pdf
-
-Required properties:
-
-	-compatible: should be "vishay,vcnl4035"
-	-reg: I2C address of the sensor, should be 0x60
-	-interrupts: interrupt mapping for GPIO IRQ (level active low)
-
-Example:
-
-light-sensor@60 {
-	compatible = "vishay,vcnl4035";
-	reg = <0x60>;
-	interrupt-parent = <&gpio4>;
-	interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
index 0ff9b11f9d18..fb19a2d7a849 100644
--- a/Documentation/devicetree/bindings/iio/light/veml6030.yaml
+++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
@@ -45,6 +45,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
new file mode 100644
index 000000000000..4d1a225e8868
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,vcnl4000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VISHAY VCNL4000 ambient light and proximity sensor
+
+maintainers:
+  - Peter Meerwald <pmeerw@pmeerw.net>
+
+description: |
+  Ambient light sensing with proximity detection over an i2c
+  interface.
+
+allOf:
+  - $ref: ../common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - vishay,vcnl4000
+      - vishay,vcnl4010
+      - vishay,vcnl4020
+      - vishay,vcnl4040
+      - vishay,vcnl4200
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  proximity-near-level: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@51 {
+            compatible = "vishay,vcnl4200";
+            reg = <0x51>;
+            proximity-near-level = <220>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4035.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4035.yaml
new file mode 100644
index 000000000000..2c57ff05de15
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4035.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,vcnl4035.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VISHAY VCNL4035 ambient Light and proximity sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Datasheet at https://www.vishay.com/docs/84251/vcnl4035x01.pdf
+
+properties:
+  compatible:
+    const: vishay,vcnl4035
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@60 {
+            compatible = "vishay,vcnl4035";
+            reg = <0x60>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/vl6180.txt b/Documentation/devicetree/bindings/iio/light/vl6180.txt
deleted file mode 100644
index 2c52952715a0..000000000000
--- a/Documentation/devicetree/bindings/iio/light/vl6180.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-STMicro VL6180 -  ALS, range and proximity sensor
-
-Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
-
-Required properties:
-
-	-compatible: should be "st,vl6180"
-	-reg: the I2C address of the sensor
-
-Example:
-
-vl6180@29 {
-	compatible = "st,vl6180";
-	reg = <0x29>;
-};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt
deleted file mode 100644
index baecc4a85197..000000000000
--- a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Asahi Kasei AK8974 magnetometer sensor
-
-Required properties:
-
-- compatible : should be "asahi-kasei,ak8974"
-- reg : the I2C address of the magnetometer
-
-Optional properties:
-
-- avdd-supply: regulator supply for the analog voltage
-  (see regulator/regulator.txt)
-- dvdd-supply: regulator supply for the digital voltage
-  (see regulator/regulator.txt)
-- interrupts: data ready (DRDY) and interrupt (INT1) lines
-  from the chip, the DRDY interrupt must be placed first.
-  The interrupts can be triggered on rising or falling
-  edges alike.
-- mount-matrix: an optional 3x3 mounting rotation matrix
-
-Example:
-
-ak8974@f {
-	compatible = "asahi-kasei,ak8974";
-	reg = <0x0f>;
-	avdd-supply = <&foo_reg>;
-	dvdd-supply = <&bar_reg>;
-	interrupts = <0 IRQ_TYPE_EDGE_RISING>,
-		     <1 IRQ_TYPE_EDGE_RISING>;
-};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
deleted file mode 100644
index aa67ceb0d4e0..000000000000
--- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* AsahiKASEI AK8975 magnetometer sensor
-
-Required properties:
-
-  - compatible : should be "asahi-kasei,ak8975"
-  - reg : the I2C address of the magnetometer
-
-Optional properties:
-
-  - gpios : should be device tree identifier of the magnetometer DRDY pin
-  - vdd-supply: an optional regulator that needs to be on to provide VDD
-  - mount-matrix: an optional 3x3 mounting rotation matrix
-
-Example:
-
-ak8975@c {
-        compatible = "asahi-kasei,ak8975";
-        reg = <0x0c>;
-        gpios = <&gpj0 7 0>;
-        vdd-supply = <&ldo_3v3_gnss>;
-        mount-matrix = "-0.984807753012208",  /* x0 */
-                       "0",                   /* y0 */
-                       "-0.173648177666930",  /* z0 */
-                       "0",                   /* x1 */
-                       "-1",                  /* y1 */
-                       "0",                   /* z1 */
-                       "-0.173648177666930",  /* x2 */
-                       "0",                   /* y2 */
-                       "0.984807753012208";   /* z2 */
-};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml
new file mode 100644
index 000000000000..cefb70def188
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/asahi-kasei,ak8974.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Asahi Kasei AK8974 magnetometer sensor
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - alps,hscdtd008a
+      - asahi-kasei,ak8974
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Data ready (DRDY) and interrupt (INT1) lines from the chip. The DRDY
+      interrupt must be placed first. The interrupts can be triggered on
+      rising or falling edges.
+
+  avdd-supply: true
+
+  dvdd-supply: true
+
+  mount-matrix: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@f {
+            compatible = "asahi-kasei,ak8974";
+            reg = <0x0f>;
+            avdd-supply = <&foo_reg>;
+            dvdd-supply = <&bar_reg>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>,
+                         <1 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
new file mode 100644
index 000000000000..9790f75fc669
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/asahi-kasei,ak8975.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AsahiKASEI AK8975 magnetometer sensor
+
+maintainers:
+  - Jonathan Albrieux <jonathan.albrieux@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - asahi-kasei,ak8975
+          - asahi-kasei,ak8963
+          - asahi-kasei,ak09911
+          - asahi-kasei,ak09912
+          - asahi-kasei,ak09916
+      - enum:
+          - ak8975
+          - ak8963
+          - ak09911
+          - ak09912
+          - ak09916
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  gpios:
+    maxItems: 1
+    description: |
+      AK8975 has a "Data ready" pin (DRDY) which informs that data
+      is ready to be read and is possible to listen on it. If used,
+      this should be active high. Prefer interrupt over this.
+
+  interrupts:
+    maxItems: 1
+    description: interrupt for DRDY pin. Triggered on rising edge.
+
+  vdd-supply:
+    description: |
+      an optional regulator that needs to be on to provide VDD power to
+      the sensor.
+
+  vid-supply:
+    description: |
+      an optional regulator that needs to be on to provide VID power to
+      the sensor.
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+  reset-gpios:
+    maxItems: 1
+    description: |
+      an optional pin needed for AK09911 to set the reset state. This should
+      be usually active low
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@c {
+            compatible = "asahi-kasei,ak8975";
+            reg = <0x0c>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&ldo_3v3_gnss>;
+            reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
+            mount-matrix = "-0.984807753012208",  /* x0 */
+                           "0",                   /* y0 */
+                           "-0.173648177666930",  /* z0 */
+                           "0",                   /* x1 */
+                           "-1",                  /* y1 */
+                           "0",                   /* z1 */
+                           "-0.173648177666930",  /* x2 */
+                           "0",                   /* y2 */
+                           "0.984807753012208";   /* z2 */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
deleted file mode 100644
index fd5fca90fb39..000000000000
--- a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Bosch BMC150 magnetometer sensor
-
-http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf
-
-Required properties:
-
-  - compatible : should be "bosch,bmc150_magn"
-  - reg : the I2C address of the magnetometer
-
-Optional properties:
-
-  - interrupts : interrupt mapping for GPIO IRQ
-
-Example:
-
-bmc150_magn@12 {
-        compatible = "bosch,bmc150_magn";
-        reg = <0x12>;
-        interrupt-parent = <&gpio1>;
-        interrupts = <0 1>;
-};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml
new file mode 100644
index 000000000000..2867ab6bf9b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/bosch,bmc150_magn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMC150 magnetometer sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Supports a range of parts, some of which form part of a multi die
+  package that also contains other sensors.  The interface is independent
+  however, so a separate driver is used to support the magnetometer part.
+  Datasheet at:
+  http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf
+
+properties:
+  compatible:
+    description:
+      Note the bmm150_magn is a deprecated compatible as this part contains only
+      a magnetometer.
+    enum:
+      - bosch,bmc150_magn
+      - bosch,bmc156_magn
+      - bosch,bmm150
+      - bosch,bmm150_magn
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@12 {
+            compatible = "bosch,bmc150_magn";
+            reg = <0x12>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <0 1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml b/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml
new file mode 100644
index 000000000000..6b54d32323fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/fsl,mag3110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MAG3110 magnetometer sensor
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,mag3110
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  vddio-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@e {
+            compatible = "fsl,mag3110";
+            reg = <0x0e>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt
deleted file mode 100644
index 8e191eef014e..000000000000
--- a/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Honeywell HMC5843 magnetometer sensor
-
-Required properties:
-
-  - compatible : should be "honeywell,hmc5843"
-  Other models which are supported with driver are:
-	"honeywell,hmc5883"
-	"honeywell,hmc5883l"
-	"honeywell,hmc5983"
-  - reg : the I2C address of the magnetometer - typically 0x1e
-
-Optional properties:
-
-  - gpios : should be device tree identifier of the magnetometer DRDY pin
-
-Example:
-
-hmc5843@1e {
-        compatible = "honeywell,hmc5843"
-        reg = <0x1e>;
-};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/honeywell,hmc5843.yaml b/Documentation/devicetree/bindings/iio/magnetometer/honeywell,hmc5843.yaml
new file mode 100644
index 000000000000..5e778c98584e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/honeywell,hmc5843.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/honeywell,hmc5843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell HMC5843 magnetometer sensor
+
+maintainers:
+  - Neil Brown <neilb@suse.de>
+
+properties:
+  compatible:
+    enum:
+      - honeywell,hmc5843
+      - honeywell,hmc5883
+      - honeywell,hmc5883l
+      - honeywell,hmc5983
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@1e {
+            compatible = "honeywell,hmc5843";
+            reg = <0x1e>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/mag3110.txt b/Documentation/devicetree/bindings/iio/magnetometer/mag3110.txt
deleted file mode 100644
index bdd40bcaaa1f..000000000000
--- a/Documentation/devicetree/bindings/iio/magnetometer/mag3110.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* FREESCALE MAG3110 magnetometer sensor
-
-Required properties:
-
-  - compatible : should be "fsl,mag3110"
-  - reg : the I2C address of the magnetometer
-
-Optional properties:
-
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client
-  node bindings.
-
-  - vdd-supply: phandle to the regulator that provides power to the sensor.
-  - vddio-supply: phandle to the regulator that provides power to the sensor's IO.
-
-Example:
-
-magnetometer@e {
-	compatible = "fsl,mag3110";
-	reg = <0x0e>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
-	interrupt-parent = <&gpio3>;
-	interrupts = <16 IRQ_TYPE_EDGE_RISING>;
-};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt b/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt
deleted file mode 100644
index a01235c7fa15..000000000000
--- a/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* MEMSIC MMC35240 magnetometer sensor
-
-Required properties:
-
-  - compatible : should be "memsic,mmc35240"
-  - reg : the I2C address of the magnetometer
-
-Example:
-
-mmc35240@30 {
-        compatible = "memsic,mmc35240";
-        reg = <0x30>;
-};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt
deleted file mode 100644
index 497c932e9e39..000000000000
--- a/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* PNI RM3100 3-axis magnetometer sensor
-
-Required properties:
-
-- compatible : should be "pni,rm3100"
-- reg : the I2C address or SPI chip select number of the sensor.
-
-Optional properties:
-
-- interrupts: data ready (DRDY) from the chip.
-  The interrupts can be triggered on level high.
-
-Example:
-
-rm3100: rm3100@20 {
-	compatible = "pni,rm3100";
-	reg = <0x20>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.yaml b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.yaml
new file mode 100644
index 000000000000..a845cdd23e7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/pni,rm3100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PNI RM3100 3-axis magnetometer sensor
+
+maintainers:
+  - Song Qiang <songqiang1304521@gmail.com>
+
+properties:
+  compatible:
+    const: pni,rm3100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@20 {
+            compatible = "pni,rm3100";
+            reg = <0x20>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
new file mode 100644
index 000000000000..9438fffaf0ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/yamaha,yas530.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Yamaha YAS530 family of magnetometer sensors
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  The Yamaha YAS530 magnetometers is a line of 3-axis magnetometers
+  first introduced by Yamaha in 2009 with the YAS530. They are successors
+  of Yamaha's first magnetometer YAS529. Over the years this magnetometer
+  has been miniaturized and appeared in a number of different variants.
+
+properties:
+  $nodename:
+    pattern: '^magnetometer@[0-9a-f]+$'
+
+  compatible:
+    items:
+      - enum:
+          - yamaha,yas530
+          - yamaha,yas532
+          - yamaha,yas533
+          - yamaha,yas535
+          - yamaha,yas536
+          - yamaha,yas537
+          - yamaha,yas539
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: The YAS530 sensor has a RSTN pin used to reset
+      the logic inside the sensor. This GPIO line should connect
+      to that pin and be marked as GPIO_ACTIVE_LOW.
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt for INT pin for interrupt generation.
+      The polarity, whether the interrupt is active on the rising
+      or the falling edge, is software-configurable in the hardware.
+
+  vdd-supply:
+    description: An optional regulator providing core power supply
+      on the VDD pin, typically 1.8 V or 3.0 V.
+
+  iovdd-supply:
+    description: An optional regulator providing I/O power supply
+      for the I2C interface on the IOVDD pin, typically 1.8 V.
+
+  mount-matrix:
+    description: An optional 3x3 mounting rotation matrix.
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            items:
+              const: yamaha,yas530
+    then:
+      properties:
+        reset-gpios: false
+
+  - if:
+      properties:
+        compatible:
+          items:
+            const: yamaha,yas539
+    then:
+      properties:
+        interrupts: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c-0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@2e {
+          compatible = "yamaha,yas530";
+          reg = <0x2e>;
+          vdd-supply = <&ldo1_reg>;
+          iovdd-supply = <&ldo2_reg>;
+          reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+          interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+
+    i2c-1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@2e {
+          compatible = "yamaha,yas539";
+          reg = <0x2e>;
+          vdd-supply = <&ldo1_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
deleted file mode 100644
index c82794002595..000000000000
--- a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-I/O channel multiplexer bindings
-
-If a multiplexer is used to select which hardware signal is fed to
-e.g. an ADC channel, these bindings describe that situation.
-
-Required properties:
-- compatible : "io-channel-mux"
-- io-channels : Channel node of the parent channel that has multiplexed
-		input.
-- io-channel-names : Should be "parent".
-- #address-cells = <1>;
-- #size-cells = <0>;
-- mux-controls : Mux controller node to use for operating the mux
-- channels : List of strings, labeling the mux controller states.
-
-For each non-empty string in the channels property, an io-channel will
-be created. The number of this io-channel is the same as the index into
-the list of strings in the channels property, and also matches the mux
-controller state. The mux controller state is described in
-../mux/mux-controller.txt
-
-Example:
-	mux: mux-controller {
-		compatible = "mux-gpio";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
-			    <&pioA 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	adc-mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 0>;
-		io-channel-names = "parent";
-
-		mux-controls = <&mux>;
-
-		channels = "sync", "in", "system-regulator";
-	};
diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml
new file mode 100644
index 000000000000..611ad4444cf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/multiplexer/io-channel-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I/O channel multiplexer bindings
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  If a multiplexer is used to select which hardware signal is fed to
+  e.g. an ADC channel, these bindings describe that situation.
+
+  For each non-empty string in the channels property, an io-channel will be
+  created. The number of this io-channel is the same as the index into the list
+  of strings in the channels property, and also matches the mux controller
+  state. The mux controller state is described in
+  Documentation/devicetree/bindings/mux/mux-controller.yaml
+
+properties:
+
+  compatible:
+    const: io-channel-mux
+
+  io-channels:
+    maxItems: 1
+    description: Channel node of the parent channel that has multiplexed input.
+
+  io-channel-names:
+    const: parent
+
+  mux-controls: true
+  mux-control-names: true
+
+  channels:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      List of strings, labeling the mux controller states. An empty
+      string for a state means that the channel is not available.
+
+  settle-time-us:
+    default: 0
+    description:
+      Time required for analog signals to settle after muxing.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - mux-controls
+  - channels
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    mux: mux-controller {
+      compatible = "gpio-mux";
+      #mux-control-cells = <0>;
+
+      mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+                  <&pioA 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    adc-mux {
+      compatible = "io-channel-mux";
+      io-channels = <&adc 0>;
+      io-channel-names = "parent";
+
+      mux-controls = <&mux>;
+      channels = "sync", "in", "system-regulator";
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt b/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
deleted file mode 100644
index f9b2eef946aa..000000000000
--- a/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Analog Devices AD5272 digital potentiometer
-
-The node for this device must be a child node of a I2C controller, hence
-all mandatory properties for your controller must be specified. See directory:
-
-        Documentation/devicetree/bindings/i2c
-
-for more details.
-
-Required properties:
-	- compatible:  	Must be one of the following, depending on the model:
-			adi,ad5272-020
-			adi,ad5272-050
-			adi,ad5272-100
-			adi,ad5274-020
-			adi,ad5274-100
-
-Optional properties:
- - reset-gpios: GPIO specification for the RESET input. This is an
-		active low signal to the AD5272.
-
-Example:
-ad5272: potentiometer@2f {
-	reg = <0x2F>;
-	compatible = "adi,ad5272-020";
-	reset-gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
new file mode 100644
index 000000000000..0ebb6725a1af
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/adi,ad5272.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5272 digital potentiometer
+
+maintainers:
+  - Phil Reid <preid@electromag.com.au>
+
+description: |
+  Datasheet: https://www.analog.com/en/products/ad5272.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5272-020
+      - adi,ad5272-050
+      - adi,ad5272-100
+      - adi,ad5274-020
+      - adi,ad5274-100
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Active low signal to the AD5272 RESET input.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        potentiometer@2f {
+            compatible = "adi,ad5272-020";
+            reg = <0x2F>;
+            reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/ds1803.txt b/Documentation/devicetree/bindings/iio/potentiometer/ds1803.txt
deleted file mode 100644
index df77bf552656..000000000000
--- a/Documentation/devicetree/bindings/iio/potentiometer/ds1803.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Maxim Integrated DS1803 digital potentiometer driver
-
-The node for this driver must be a child node of a I2C controller, hence
-all mandatory properties for your controller must be specified. See directory:
-
-        Documentation/devicetree/bindings/i2c
-
-for more details.
-
-Required properties:
-	- compatible:  	Must be one of the following, depending on the
-			model:
-			"maxim,ds1803-010",
-			"maxim,ds1803-050",
-			"maxim,ds1803-100"
-
-Example:
-ds1803: ds1803@1 {
-	reg = <0x28>;
-	compatible = "maxim,ds1803-010";
-};
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt b/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt
deleted file mode 100644
index 6a91b106e076..000000000000
--- a/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Maxim Linear-Taper Digital Potentiometer MAX5481-MAX5484
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in
-
-        Documentation/devicetree/bindings/spi/spi-bus.txt
-
-must be specified.
-
-Required properties:
-	- compatible:  	Must be one of the following, depending on the
-			model:
-			"maxim,max5481"
-			"maxim,max5482"
-			"maxim,max5483"
-			"maxim,max5484"
-
-Example:
-max548x: max548x@0 {
-	compatible = "maxim,max5482";
-	spi-max-frequency = <7000000>;
-	reg = <0>; /* chip-select */
-};
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
deleted file mode 100644
index 566711b9950c..000000000000
--- a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
-
-Datasheet publicly available at:
-http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in
-
-        Documentation/devicetree/bindings/spi/spi-bus.txt
-
-must be specified.
-
-Required properties:
-	- compatible:  	Must be one of the following, depending on the
-			model:
-			"microchip,mcp41010"
-			"microchip,mcp41050"
-			"microchip,mcp41100"
-			"microchip,mcp42010"
-			"microchip,mcp42050"
-			"microchip,mcp42100"
-
-Example:
-potentiometer@0 {
-	compatible = "microchip,mcp41010";
-	reg = <0>;
-	spi-max-frequency = <500000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp4131.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp4131.txt
deleted file mode 100644
index 3ccba16f7035..000000000000
--- a/Documentation/devicetree/bindings/iio/potentiometer/mcp4131.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-* Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X Digital Potentiometer
-  driver
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in
-
-        Documentation/devicetree/bindings/spi/spi-bus.txt
-
-must be specified.
-
-Required properties:
-	- compatible:  	Must be one of the following, depending on the
-			model:
-			"microchip,mcp4131-502"
-			"microchip,mcp4131-103"
-			"microchip,mcp4131-503"
-			"microchip,mcp4131-104"
-			"microchip,mcp4132-502"
-			"microchip,mcp4132-103"
-			"microchip,mcp4132-503"
-			"microchip,mcp4132-104"
-			"microchip,mcp4141-502"
-			"microchip,mcp4141-103"
-			"microchip,mcp4141-503"
-			"microchip,mcp4141-104"
-			"microchip,mcp4142-502"
-			"microchip,mcp4142-103"
-			"microchip,mcp4142-503"
-			"microchip,mcp4142-104"
-			"microchip,mcp4151-502"
-			"microchip,mcp4151-103"
-			"microchip,mcp4151-503"
-			"microchip,mcp4151-104"
-			"microchip,mcp4152-502"
-			"microchip,mcp4152-103"
-			"microchip,mcp4152-503"
-			"microchip,mcp4152-104"
-			"microchip,mcp4161-502"
-			"microchip,mcp4161-103"
-			"microchip,mcp4161-503"
-			"microchip,mcp4161-104"
-			"microchip,mcp4162-502"
-			"microchip,mcp4162-103"
-			"microchip,mcp4162-503"
-			"microchip,mcp4162-104"
-			"microchip,mcp4231-502"
-			"microchip,mcp4231-103"
-			"microchip,mcp4231-503"
-			"microchip,mcp4231-104"
-			"microchip,mcp4232-502"
-			"microchip,mcp4232-103"
-			"microchip,mcp4232-503"
-			"microchip,mcp4232-104"
-			"microchip,mcp4241-502"
-			"microchip,mcp4241-103"
-			"microchip,mcp4241-503"
-			"microchip,mcp4241-104"
-			"microchip,mcp4242-502"
-			"microchip,mcp4242-103"
-			"microchip,mcp4242-503"
-			"microchip,mcp4242-104"
-			"microchip,mcp4251-502"
-			"microchip,mcp4251-103"
-			"microchip,mcp4251-503"
-			"microchip,mcp4251-104"
-			"microchip,mcp4252-502"
-			"microchip,mcp4252-103"
-			"microchip,mcp4252-503"
-			"microchip,mcp4252-104"
-			"microchip,mcp4261-502"
-			"microchip,mcp4261-103"
-			"microchip,mcp4261-503"
-			"microchip,mcp4261-104"
-			"microchip,mcp4262-502"
-			"microchip,mcp4262-103"
-			"microchip,mcp4262-503"
-			"microchip,mcp4262-104"
-
-Example:
-mcp4131: mcp4131@0 {
-	compatible = "mcp4131-502";
-	reg = <0>;
-	spi-max-frequency = <500000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
new file mode 100644
index 000000000000..87e88f2a9908
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/microchip,mcp41010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
+
+maintainers:
+  - Chris Coffey <cmc@babblebit.net>
+
+description: |
+  Datasheet: https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp41010
+      - microchip,mcp41050
+      - microchip,mcp41100
+      - microchip,mcp42010
+      - microchip,mcp42050
+      - microchip,mcp42100
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        potentiometer@0 {
+            compatible = "microchip,mcp41010";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
new file mode 100644
index 000000000000..896fe0b5edcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/microchip,mcp4131.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X Digital Potentiometer
+
+maintainers:
+  - Slawomir Stepien <sst@poczta.fm>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp4131-103
+      - microchip,mcp4131-104
+      - microchip,mcp4131-502
+      - microchip,mcp4131-503
+      - microchip,mcp4132-103
+      - microchip,mcp4132-104
+      - microchip,mcp4132-502
+      - microchip,mcp4132-503
+      - microchip,mcp4141-103
+      - microchip,mcp4141-104
+      - microchip,mcp4141-502
+      - microchip,mcp4141-503
+      - microchip,mcp4142-103
+      - microchip,mcp4142-104
+      - microchip,mcp4142-502
+      - microchip,mcp4142-503
+      - microchip,mcp4151-103
+      - microchip,mcp4151-104
+      - microchip,mcp4151-502
+      - microchip,mcp4151-503
+      - microchip,mcp4152-103
+      - microchip,mcp4152-104
+      - microchip,mcp4152-502
+      - microchip,mcp4152-503
+      - microchip,mcp4161-103
+      - microchip,mcp4161-104
+      - microchip,mcp4161-502
+      - microchip,mcp4161-503
+      - microchip,mcp4162-103
+      - microchip,mcp4162-104
+      - microchip,mcp4162-502
+      - microchip,mcp4162-503
+      - microchip,mcp4231-103
+      - microchip,mcp4231-104
+      - microchip,mcp4231-502
+      - microchip,mcp4231-503
+      - microchip,mcp4232-103
+      - microchip,mcp4232-104
+      - microchip,mcp4232-502
+      - microchip,mcp4232-503
+      - microchip,mcp4241-103
+      - microchip,mcp4241-104
+      - microchip,mcp4241-502
+      - microchip,mcp4241-503
+      - microchip,mcp4242-103
+      - microchip,mcp4242-104
+      - microchip,mcp4242-502
+      - microchip,mcp4242-503
+      - microchip,mcp4251-103
+      - microchip,mcp4251-104
+      - microchip,mcp4251-502
+      - microchip,mcp4251-503
+      - microchip,mcp4252-103
+      - microchip,mcp4252-104
+      - microchip,mcp4252-502
+      - microchip,mcp4252-503
+      - microchip,mcp4261-103
+      - microchip,mcp4261-104
+      - microchip,mcp4261-502
+      - microchip,mcp4261-503
+      - microchip,mcp4262-103
+      - microchip,mcp4262-104
+      - microchip,mcp4262-502
+      - microchip,mcp4262-503
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        potentiometer@0 {
+            compatible = "microchip,mcp4131-502";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4531.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4531.yaml
new file mode 100644
index 000000000000..5c4b9b9181ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4531.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/microchip,mcp4531.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip mcp4531 and similar potentiometers.
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  Family of I2C digital potentiometer
+  Datasheets at:
+  * volatile https://ww1.microchip.com/downloads/en/DeviceDoc/22096b.pdf
+  * non-volatile https://ww1.microchip.com/downloads/en/DeviceDoc/22107B.pdf
+  Part numbers as follows: mcp4ABC-XXX where
+  A =   5 (1 wiper), 6 (2 wipers)
+  B =   3 (7-bit, volatile), 4 (7-bit, non-volatile),
+        5 (8-bit, volatile), 6 (8-bit, non-volatile),
+  C:    1 (potentiometer), 2 (rheostat)
+  XXX = 502 (5 kOhms), 103 (10 kOhms), 503 (50 kOhms), 104 (100 kOhms)
+
+properties:
+  compatible:
+    enum:
+        # Ordering reflects part number + range, so 502 < 103 etc
+      - microchip,mcp4531-502
+      - microchip,mcp4531-103
+      - microchip,mcp4531-503
+      - microchip,mcp4531-104
+      - microchip,mcp4532-502
+      - microchip,mcp4532-103
+      - microchip,mcp4532-503
+      - microchip,mcp4532-104
+      - microchip,mcp4541-502
+      - microchip,mcp4541-103
+      - microchip,mcp4541-503
+      - microchip,mcp4541-104
+      - microchip,mcp4542-502
+      - microchip,mcp4542-103
+      - microchip,mcp4542-503
+      - microchip,mcp4542-104
+      - microchip,mcp4551-502
+      - microchip,mcp4551-103
+      - microchip,mcp4551-503
+      - microchip,mcp4551-104
+      - microchip,mcp4552-502
+      - microchip,mcp4552-103
+      - microchip,mcp4552-503
+      - microchip,mcp4552-104
+      - microchip,mcp4561-502
+      - microchip,mcp4561-103
+      - microchip,mcp4561-503
+      - microchip,mcp4561-104
+      - microchip,mcp4562-502
+      - microchip,mcp4562-103
+      - microchip,mcp4562-503
+      - microchip,mcp4562-104
+      - microchip,mcp4631-502
+      - microchip,mcp4631-103
+      - microchip,mcp4631-503
+      - microchip,mcp4631-104
+      - microchip,mcp4632-502
+      - microchip,mcp4632-103
+      - microchip,mcp4632-503
+      - microchip,mcp4632-104
+      - microchip,mcp4641-502
+      - microchip,mcp4641-103
+      - microchip,mcp4641-503
+      - microchip,mcp4641-104
+      - microchip,mcp4642-502
+      - microchip,mcp4642-103
+      - microchip,mcp4642-503
+      - microchip,mcp4642-104
+      - microchip,mcp4651-502
+      - microchip,mcp4651-103
+      - microchip,mcp4651-503
+      - microchip,mcp4651-104
+      - microchip,mcp4652-502
+      - microchip,mcp4652-103
+      - microchip,mcp4652-503
+      - microchip,mcp4652-104
+      - microchip,mcp4661-502
+      - microchip,mcp4661-103
+      - microchip,mcp4661-503
+      - microchip,mcp4661-104
+      - microchip,mcp4662-502
+      - microchip,mcp4662-103
+      - microchip,mcp4662-503
+      - microchip,mcp4662-104
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dpot: dpot@28 {
+            compatible = "microchip,mcp4651-104";
+            reg = <0x28>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
deleted file mode 100644
index e6d0c2eb345c..000000000000
--- a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Texas Instruments LMP91000 series of potentiostats
-
-LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
-LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
-
-Required properties:
-
-  - compatible: should be one of the following:
-                 "ti,lmp91000"
-                 "ti,lmp91002"
-  - reg: the I2C address of the device
-  - io-channels: the phandle of the iio provider
-
-  - ti,external-tia-resistor: if the property ti,tia-gain-ohm is not defined this
-    needs to be set to signal that an external resistor value is being used.
-
-Optional properties:
-
-  - ti,tia-gain-ohm: ohm value of the internal resistor for the transimpedance
-    amplifier. Must be 2750, 3500, 7000, 14000, 35000, 120000, or 350000 ohms.
-
-  - ti,rload-ohm: ohm value of the internal resistor load applied to the gas
-    sensor. Must be 10, 33, 50, or 100 (default) ohms.
-
-Example:
-
-lmp91000@48 {
-	compatible = "ti,lmp91000";
-	reg = <0x48>;
-	ti,tia-gain-ohm = <7500>;
-	ti,rload = <100>;
-	io-channels = <&adc>;
-};
diff --git a/Documentation/devicetree/bindings/iio/potentiostat/ti,lmp91000.yaml b/Documentation/devicetree/bindings/iio/potentiostat/ti,lmp91000.yaml
new file mode 100644
index 000000000000..e4b5d890e8d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiostat/ti,lmp91000.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiostat/ti,lmp91000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LMP91000 series of potentiostats with I2C control
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description: |
+  Typically used as a signal conditioner for chemical sensors.
+  LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
+  LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lmp91000
+      - ti,lmp91002
+
+  reg:
+    maxItems: 1
+
+  io-channels:
+    maxItems: 1
+
+  ti,external-tia-resistor:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If the property ti,tia-gain-ohm is not defined this needs to be set to
+      signal that an external resistor value is being used.
+
+  ti,tia-gain-ohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2750, 3500, 7000, 14000, 35000, 120000, 350000]
+    description:
+      Internal resistor for the transimpedance amplifier.
+
+  ti,rload-ohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [10, 33, 50, 100]
+    description:
+      Internal resistor load applied to the gas sensor.
+      Default 100 Ohms.
+
+required:
+  - compatible
+  - reg
+  - io-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        lmp91000@48 {
+            compatible = "ti,lmp91000";
+            reg = <0x48>;
+            ti,tia-gain-ohm = <7000>;
+            ti,rload-ohm = <100>;
+            io-channels = <&adc>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index 9f5ca9c42025..1f9fe15b4b3c 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -7,13 +7,13 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: All Sensors DLH series low voltage digital pressure sensors
 
 maintainers:
-  - Tomislav Denis <tomislav.denis@avl.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   Bindings for the All Sensors DLH series pressure sensors.
 
   Specifications about the sensors can be found at:
-    http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+    https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
 
 properties:
   compatible:
@@ -33,6 +33,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 519137e5c170..72cd2c2d3f17 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: BMP085/BMP180/BMP280/BME280 pressure iio sensors
+title: BMP085/BMP180/BMP280/BME280/BMP380 pressure iio sensors
 
 maintainers:
   - Andreas Klinger <ak@it-klinger.de>
@@ -16,6 +16,7 @@ description: |
     https://www.bosch-sensortec.com/bst/products/all_products/bmp180
     https://www.bosch-sensortec.com/bst/products/all_products/bmp280
     https://www.bosch-sensortec.com/bst/products/all_products/bme280
+    https://www.bosch-sensortec.com/bst/products/all_products/bmp380
 
 properties:
   compatible:
@@ -24,6 +25,10 @@ properties:
       - bosch,bmp180
       - bosch,bmp280
       - bosch,bme280
+      - bosch,bmp380
+
+  reg:
+    maxItems: 1
 
   vddd-supply:
     description:
@@ -49,6 +54,8 @@ required:
   - vddd-supply
   - vdda-supply
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml
new file mode 100644
index 000000000000..69a3759e23db
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/hoperf,hp03.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HopeRF HP03 digital pressure/temperature sensors
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  Digital pressure and temperature sensor with an I2C interface.
+
+properties:
+  compatible:
+    const: hoperf,hp03
+
+  reg:
+    maxItems: 1
+
+  xclr-gpios:
+    description:
+      The XCLR pin is a reset of the ADC in the chip, it must be pulled
+      HI before the conversion and readout of the value from the ADC
+      registers and pulled LO afterward.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@77 {
+            compatible = "hoperf,hp03";
+            reg = <0x77>;
+            xclr-gpios = <&portc 0 0x0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt
deleted file mode 100644
index 831dbee7a5c3..000000000000
--- a/Documentation/devicetree/bindings/iio/pressure/hp03.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-HopeRF HP03 digital pressure/temperature sensors
-
-Required properties:
-- compatible: must be "hoperf,hp03"
-- xclr-gpio: must be device tree identifier of the XCLR pin.
-             The XCLR pin is a reset of the ADC in the chip,
-             it must be pulled HI before the conversion and
-             readout of the value from the ADC registers and
-             pulled LO afterward.
-
-Example:
-
-hp03@77 {
-	compatible = "hoperf,hp03";
-	reg = <0x77>;
-	xclr-gpio = <&portc 0 0x0>;
-};
diff --git a/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml b/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml
new file mode 100644
index 000000000000..4f06707450bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/meas,ms5611.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Measurement Specialities ms5611 and similar pressure sensors
+
+maintainers:
+  - Tomasz Duszynski <tduszyns@gmail.com>
+
+description: |
+  Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces.
+
+properties:
+  compatible:
+    enum:
+      - meas,ms5607
+      - meas,ms5611
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  spi-max-frequency:
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@77 {
+            compatible = "meas,ms5607";
+            reg = <0x77>;
+            vdd-supply = <&ldo_3v3_gnss>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure@0 {
+            compatible = "meas,ms5611";
+            reg = <0>;
+            vdd-supply = <&ldo_3v3_gnss>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/ms5611.txt b/Documentation/devicetree/bindings/iio/pressure/ms5611.txt
deleted file mode 100644
index 17bca866c084..000000000000
--- a/Documentation/devicetree/bindings/iio/pressure/ms5611.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-MEAS ms5611 family pressure sensors
-
-Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces.
-
-Required properties:
-- compatible: "meas,ms5611" or "meas,ms5607"
-- reg: the I2C address or SPI chip select the device will respond to
-
-Optional properties:
-- vdd-supply: an optional regulator that needs to be on to provide VDD
-  power to the sensor.
-
-Example:
-
-ms5607@77 {
-	compatible = "meas,ms5607";
-	reg = <0x77>;
-	vdd-supply = <&ldo_3v3_gnss>;
-};
diff --git a/Documentation/devicetree/bindings/iio/pressure/ms5637.txt b/Documentation/devicetree/bindings/iio/pressure/ms5637.txt
deleted file mode 100644
index 1f43ffa068ac..000000000000
--- a/Documentation/devicetree/bindings/iio/pressure/ms5637.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* MS5637 - Measurement-Specialties MS5637, MS5805, MS5837 and MS8607 pressure & temperature sensor
-
-Required properties:
-
-	-compatible: should be one of the following
-		meas,ms5637
-		meas,ms5805
-		meas,ms5837
-		meas,ms8607-temppressure
-	-reg: I2C address of the sensor
-
-Example:
-
-ms5637@76 {
-	compatible = "meas,ms5637";
-	reg = <0x76>;
-};
diff --git a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
new file mode 100644
index 000000000000..d6103be03460
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/murata,zpa2326.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Murata ZPA2326 pressure sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Pressure sensor from Murata with SPI and I2C bus interfaces.
+
+
+properties:
+  compatible:
+    const: murata,zpa2326
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vref-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@5c {
+            compatible = "murata,zpa2326";
+            reg = <0x5c>;
+            interrupt-parent = <&gpio>;
+            interrupts = <12>;
+            vdd-supply = <&ldo_1v8_gnss>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure@0 {
+            compatible = "murata,zpa2326";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt b/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt
deleted file mode 100644
index a36ab3e0c3f7..000000000000
--- a/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Murata ZPA2326 pressure sensor
-
-Pressure sensor from Murata with SPI and I2C bus interfaces.
-
-Required properties:
-- compatible: "murata,zpa2326"
-- reg: the I2C address or SPI chip select the device will respond to
-
-Recommended properties for SPI bus usage:
-- spi-max-frequency: maximum SPI bus frequency as documented in
-  Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Optional properties:
-- vref-supply: an optional regulator that needs to be on to provide VREF
-  power to the sensor
-- vdd-supply: an optional regulator that needs to be on to provide VDD
-  power to the sensor
-- interrupts: interrupt mapping for IRQ as documented in
-  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Example:
-
-zpa2326@5c {
-	compatible = "murata,zpa2326";
-	reg = <0x5c>;
-	interrupt-parent = <&gpio>;
-	interrupts = <12>;
-	vdd-supply = <&ldo_1v8_gnss>;
-};
diff --git a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
new file mode 100644
index 000000000000..7fcba5d6d508
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/ams,as3935.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Austrian Microsystems AS3935 Franklin lightning sensor
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description:
+  This lightening distance sensor uses an I2C or SPI interface. The
+  binding currently only covers the SPI option.
+
+properties:
+  compatible:
+    const: ams,as3935
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  spi-cpha: true
+
+  interrupts:
+    maxItems: 1
+
+  ams,tuning-capacitor-pf:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Calibration tuning capacitor stepping value. This will require using
+      the calibration data from the manufacturer.
+    minimum: 0
+    maximum: 120
+
+  ams,nflwdth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Set the noise and watchdog threshold register on startup. This will
+      need to set according to the noise from the MCU board, and possibly
+      the local environment. Refer to the datasheet for the threshold settings.
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+    lightning@0 {
+            compatible = "ams,as3935";
+            reg = <0>;
+            spi-max-frequency = <400000>;
+            spi-cpha;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 1>;
+            ams,tuning-capacitor-pf = <80>;
+            ams,nflwdth = <0x44>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
deleted file mode 100644
index 849115585d55..000000000000
--- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Austrian Microsystems AS3935 Franklin lightning sensor device driver
-
-Required properties:
-	- compatible: must be "ams,as3935"
-	- reg: SPI chip select number for the device
-	- spi-max-frequency: specifies maximum SPI clock frequency
-	- spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI
-	slave node bindings.
-	- interrupts : the sole interrupt generated by the device
-
-	Refer to interrupt-controller/interrupts.txt for generic
-	interrupt client node bindings.
-
-Optional properties:
-	- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
-	  value 0 - 120pF. This will require using the calibration data from
-	  the manufacturer.
-	- ams,nflwdth: Set the noise and watchdog threshold register on
-	  startup. This will need to set according to the noise from the
-	  MCU board, and possibly the local environment. Refer to the
-	  datasheet for the threshold settings.
-
-Example:
-
-as3935@0 {
-	compatible = "ams,as3935";
-	reg = <0>;
-	spi-max-frequency = <400000>;
-	spi-cpha;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 1>;
-	ams,tuning-capacitor-pf = <80>;
-	ams,nflwdth = <0x44>;
-};
diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
index 4e80ea7c1475..ce795279839e 100644
--- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
@@ -17,9 +17,9 @@ description: |
     until it is received once again
 
   Specifications about the devices can be found at:
-  http://www.robot-electronics.co.uk/htm/srf04tech.htm
+  https://www.robot-electronics.co.uk/htm/srf04tech.htm
 
-  http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
+  https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
 
 properties:
   compatible:
@@ -51,11 +51,31 @@ properties:
       the time between two interrupts is measured in the driver.
     maxItems: 1
 
+  power-gpios:
+    description:
+      Definition of the GPIO for power management of connected peripheral
+      (output).
+      This GPIO can be used by the external hardware for power management.
+      When the device gets suspended it's switched off and when it resumes
+      it's switched on again. After some period of inactivity the driver
+      get suspended automatically (autosuspend feature).
+    maxItems: 1
+
+  startup-time-ms:
+    description:
+      This is the startup time the device needs after a resume to be up and
+      running.
+    minimum: 0
+    maximum: 1000
+    default: 100
+
 required:
   - compatible
   - trig-gpios
   - echo-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
new file mode 100644
index 000000000000..00e3b59641d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC MKBP Proximity Sensor
+
+maintainers:
+  - Stephen Boyd <swboyd@chromium.org>
+  - Benson Leung <bleung@chromium.org>
+
+description: |
+  Google's ChromeOS EC sometimes has the ability to detect user proximity.
+  This is implemented on the EC as near/far logic and exposed to the OS
+  via an MKBP switch bit.
+
+properties:
+  compatible:
+    const: google,cros-ec-mkbp-proximity
+
+  label:
+    description: Name for proximity sensor
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    proximity {
+      compatible = "google,cros-ec-mkbp-proximity";
+      label = "proximity-wifi-lte";
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
index a079c9921af6..ada55f186f3c 100644
--- a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
@@ -42,6 +42,8 @@ required:
   - compatible
   - ping-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
new file mode 100644
index 000000000000..5de0bb2180e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9310.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9310 capacitive proximity sensor
+
+maintainers:
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9310/SX9311 capacitive proximity/button solution.
+
+  Specifications about the devices can be found at:
+  https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310
+
+properties:
+  compatible:
+    enum:
+      - semtech,sx9310
+      - semtech,sx9311
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      The sole interrupt generated by the device used to announce the
+      preceding reading request has finished and that data is
+      available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,cs0-ground:
+    description: Indicates the CS0 sensor is connected to ground.
+    type: boolean
+
+  semtech,combined-sensors:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      List of which sensors are combined and represented by CS3.
+      Possible values are -
+      3        - CS3 (internal)
+      0 1      - CS0 + CS1
+      1 2      - CS1 + CS2 (default)
+      0 1 2 3  - CS0 + CS1 + CS2 + CS3
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 1
+    maxItems: 4
+
+  semtech,resolution:
+    description:
+      Capacitance measure resolution. Refer to datasheet for more details.
+    enum:
+      - coarsest
+      - very-coarse
+      - coarse
+      - medium-coarse
+      - medium
+      - fine
+      - very-fine
+      - finest
+
+  semtech,startup-sensor:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Sensor used for start-up proximity detection. The combined
+      sensor is represented by the value 3. This is used for initial
+      compensation.
+
+  semtech,proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 2, 4, 8]
+    default: 2
+    description:
+      PROXRAW filter strength. A value of 0 represents off, and other values
+      represent 1-1/N.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description:
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9310";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,cs0-ground;
+        semtech,combined-sensors = <1 2 3>;
+        semtech,resolution = "fine";
+        semtech,startup-sensor = <1>;
+        semtech,proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
new file mode 100644
index 000000000000..b3aa2ebf9661
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9324.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9324 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <gwendal@chromium.org>
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9324 proximity sensor.
+
+properties:
+  compatible:
+    const: semtech,sx9324
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,ph0-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of 3 entries. Index represent the id of the CS pin.
+      Value indicates how each CS pin is used during phase 0.
+      Each of the 3 pins have the following value -
+      0 : unused (high impedance)
+      1 : measured input
+      2 : dynamic shield
+      3 : grounded.
+      For instance, CS0 measured, CS1 shield and CS2 ground is [1, 2, 3]
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph1-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 1.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph2-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 2.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph3-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 3.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+
+  semtech,ph01-resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For phase 0 and 1.
+      Higher the number, higher the resolution.
+    default: 128
+
+  semtech,ph23-resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For phase 2 and 3
+    default: 128
+
+  semtech,startup-sensor:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Phase used for start-up proximity detection.
+      It is used when we enable a phase to remove static offset and measure
+      only capacitance changes introduced by the user.
+
+  semtech,ph01-proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      PROXRAW filter strength for phase 0 and 1. A value of 0 represents off,
+      and other values represent 1-1/2^N.
+
+  semtech,ph23-proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      Same as proxraw-strength01, for phase 2 and 3.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description: |
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+  semtech,cs-idle-sleep:
+    description:
+      State of CS pins during sleep mode and idle time.
+    enum:
+      - hi-z
+      - gnd
+      - vdd
+
+  semtech,int-comp-resistor:
+    description:
+      Internal resistor setting for compensation.
+    enum:
+      - lowest
+      - low
+      - high
+      - highest
+
+  semtech,input-precharge-resistor-ohms:
+    default: 4000
+    multipleOf: 2000
+    minimum: 0
+    maximum: 30000
+    description:
+      Pre-charge input resistance in Ohm.
+
+  semtech,input-analog-gain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: |
+      Defines the input antenna analog gain
+      0: x1.247
+      1: x1 (default)
+      2: x0.768
+      3: x0.552
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9324";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,ph0-pin = <1 2 3>;
+        semtech,ph1-pin = <3 2 1>;
+        semtech,ph2-pin = <1 2 3>;
+        semtech,ph3-pin = <3 2 1>;
+        semtech,ph01-resolution = <256>;
+        semtech,ph23-resolution = <256>;
+        semtech,startup-sensor = <1>;
+        semtech,ph01-proxraw-strength = <2>;
+        semtech,ph23-proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+        semtech,int-comp-resistor = "lowest";
+        semtech,input-precharge-resistor-ohms = <2000>;
+        semtech,cs-idle-sleep = "gnd";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
new file mode 100644
index 000000000000..f088c5d2be99
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9360 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <gwendal@chromium.org>
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9360 proximity sensor.
+
+properties:
+  compatible:
+    const: semtech,sx9360
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For both phases, "reference" and
+      "measurement". Higher the number, higher the resolution.
+    default: 128
+
+  semtech,proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      PROXRAW filter strength for both phases. A value of 0 represents off,
+      and other values represent 1-1/2^N.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description: |
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+  semtech,input-precharge-resistor-ohms:
+    default: 0
+    multipleOf: 2000
+    minimum: 0
+    maximum: 30000
+    description:
+      Pre-charge input resistance in Ohm.
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9360";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,resolution = <256>;
+        semtech,proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+        semtech,input-precharge-resistor-ohms = <4000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9500.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9500.yaml
new file mode 100644
index 000000000000..66dd01506859
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9500.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9500 capacitive proximity button device
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: semtech,sx9500
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO connected to the active low reset pin.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@28 {
+            compatible = "semtech,sx9500";
+            reg = <0x28>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
new file mode 100644
index 000000000000..322befc41de6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/st,vl53l0x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST VL53L0X ToF ranging sensor
+
+maintainers:
+  - Song Qiang <songqiang1304521@gmail.com>
+
+properties:
+  compatible:
+    const: st,vl53l0x
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@29 {
+            compatible = "st,vl53l0x";
+            reg = <0x29>;
+            interrupt-parent = <&gpio>;
+            interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
deleted file mode 100644
index c54455db3bec..000000000000
--- a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Semtech's SX9500 capacitive proximity button device driver
-
-Required properties:
-	- compatible: must be "semtech,sx9500"
-	- reg: i2c address where to find the device
-	- interrupts : the sole interrupt generated by the device
-
-	Refer to interrupt-controller/interrupts.txt for generic
-	interrupt client node bindings.
-
-Optional properties:
-	- reset-gpios: Reference to the GPIO connected to the device's active
-	  low reset pin.
-
-Example:
-
-sx9500@28 {
-	compatible = "semtech,sx9500";
-	reg = <0x28>;
-	interrupt-parent = <&gpio2>;
-	interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-	reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
-};
diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
new file mode 100644
index 000000000000..fbd3a2e32280
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/vishay,vcnl3020.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Integrated Proximity Sensor With Infrared Emitter
+
+maintainers:
+  - Ivan Mikhaylov <i.mikhaylov@yadro.com>
+
+description: |
+  The VCNL3020 is a fully integrated proximity sensor. Fully integrated means
+  that the infrared emitter is included in the package. It has 16-bit
+  resolution. It includes a signal processing IC and features standard I2C
+  communication interface. It features an interrupt function.
+
+  Specifications about the devices can be found at:
+  https://www.vishay.com/docs/84150/vcnl3020.pdf
+
+properties:
+  compatible:
+    enum:
+      - vishay,vcnl3020
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+  vishay,led-current-microamp:
+    description:
+      The driver current for the LED used in proximity sensing.
+    enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000,
+           100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
+           180000, 190000, 200000]
+    default: 20000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@13 {
+              compatible = "vishay,vcnl3020";
+              reg = <0x13>;
+              vishay,led-current-microamp = <200000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt b/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
deleted file mode 100644
index aac5f621f8dc..000000000000
--- a/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-ST VL53L0X ToF ranging sensor
-
-Required properties:
-	- compatible: must be "st,vl53l0x"
-	- reg: i2c address where to find the device
-
-Example:
-
-vl53l0x@29 {
-	compatible = "st,vl53l0x";
-	reg = <0x29>;
-};
diff --git a/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt
deleted file mode 100644
index 477d41fa6467..000000000000
--- a/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Analog Devices AD2S90 Resolver-to-Digital Converter
-
-https://www.analog.com/en/products/ad2s90.html
-
-Required properties:
-  - compatible: should be "adi,ad2s90"
-  - reg: SPI chip select number for the device
-  - spi-max-frequency: set maximum clock frequency, must be 830000
-  - spi-cpol and spi-cpha:
-        Either SPI mode (0,0) or (1,1) must be used, so specify none or both of
-        spi-cpha, spi-cpol.
-
-See for more details:
-    Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Note about max frequency:
-    Chip's max frequency, as specified in its datasheet, is 2Mhz. But a 600ns
-    delay is expected between the application of a logic LO to CS and the
-    application of SCLK, as also specified. And since the delay is not
-    implemented in the spi code, to satisfy it, SCLK's period should be at most
-    2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which gives
-    roughly 830000Hz.
-
-Example:
-resolver@0 {
-	compatible = "adi,ad2s90";
-	reg = <0>;
-	spi-max-frequency = <830000>;
-	spi-cpol;
-	spi-cpha;
-};
diff --git a/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml
new file mode 100644
index 000000000000..81e4bdfc17c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/resolver/adi,ad2s90.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD2S90 Resolver-to-Digital Converter
+
+maintainers:
+  - Matheus Tavares <matheus.bernardino@usp.br>
+
+description: |
+  Datasheet: https://www.analog.com/en/products/ad2s90.html
+
+properties:
+  compatible:
+    const: adi,ad2s90
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 830000
+    description: |
+      Chip's max frequency, as specified in its datasheet, is 2Mhz. But a 600ns
+      delay is expected between the application of a logic LO to CS and the
+      application of SCLK, as also specified. And since the delay is not
+      implemented in the spi code, to satisfy it, SCLK's period should be at
+      most 2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which gives
+      roughly 830000Hz.
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        resolver@0 {
+            compatible = "adi,ad2s90";
+            reg = <0>;
+            spi-max-frequency = <830000>;
+            spi-cpol;
+            spi-cpha;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
new file mode 100644
index 000000000000..dd2ae2bd1ad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/samsung,sensorhub-rinato.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Sensorhub driver
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Sensorhub is a MCU which manages several sensors and also plays the role
+  of a virtual sensor device.
+
+properties:
+  compatible:
+    enum:
+      - samsung,sensorhub-rinato
+      - samsung,sensorhub-thermostat
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ap-mcu-gpios:
+    maxItems: 1
+    description:
+      Application Processor to sensorhub line - used during communication
+
+  mcu-ap-gpios:
+    maxItems: 1
+    description:
+      Sensorhub to Application Processor - used during communication
+
+  mcu-reset-gpios:
+    maxItems: 1
+    description:
+      Reset the sensorhub.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ap-mcu-gpios
+  - mcu-ap-gpios
+  - mcu-reset-gpios
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensorhub@0 {
+            compatible = "samsung,sensorhub-rinato";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            interrupt-parent = <&gpx0>;
+            interrupts = <2 0>;
+            ap-mcu-gpios = <&gpx0 0 0>;
+            mcu-ap-gpios = <&gpx0 4 0>;
+            mcu-reset-gpios = <&gpx0 5 0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/sensorhub.txt b/Documentation/devicetree/bindings/iio/sensorhub.txt
deleted file mode 100644
index b6ac0457d4ea..000000000000
--- a/Documentation/devicetree/bindings/iio/sensorhub.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Samsung Sensorhub driver
-
-Sensorhub is a MCU which manages several sensors and also plays the role
-of a virtual sensor device.
-
-Required properties:
-- compatible: "samsung,sensorhub-rinato" or "samsung,sensorhub-thermostat"
-- spi-max-frequency: max SPI clock frequency
-- interrupts: communication interrupt
-- ap-mcu-gpios: [out] ap to sensorhub line - used during communication
-- mcu-ap-gpios: [in] sensorhub to ap - used during communication
-- mcu-reset-gpios: [out] sensorhub reset
-
-Example:
-
-	shub_spi: shub {
-		compatible = "samsung,sensorhub-rinato";
-		spi-max-frequency = <5000000>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <2 0>;
-		ap-mcu-gpios = <&gpx0 0 0>;
-		mcu-ap-gpios = <&gpx0 4 0>;
-		mcu-reset-gpios = <&gpx0 5 0>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
new file mode 100644
index 000000000000..250439b13152
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/st,st-sensors.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics MEMS sensors
+
+description: The STMicroelectronics sensor devices are pretty straight-forward
+  I2C or SPI devices, all sharing the same device tree descriptions no matter
+  what type of sensor it is.
+  Note that whilst this covers many STMicro MEMs sensors, some more complex
+  IMUs need their own bindings.
+  The STMicroelectronics sensor devices are pretty straight-forward I2C or
+  SPI devices, all sharing the same device tree descriptions no matter what
+  type of sensor it is.
+
+maintainers:
+  - Denis Ciocca <denis.ciocca@st.com>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - description: STMicroelectronics Accelerometers
+        enum:
+          - st,h3lis331dl-accel
+          - st,lis2de12
+          - st,lis2dw12
+          - st,lis2hh12
+          - st,lis2dh12-accel
+          - st,lis302dl
+          - st,lis331dl-accel
+          - st,lis331dlh-accel
+          - st,lis3de
+          - st,lis3dh-accel
+          - st,lis3dhh
+          - st,lis3l02dq
+          - st,lis3lv02dl-accel
+          - st,lng2dm-accel
+          - st,lsm303agr-accel
+          - st,lsm303dl-accel
+          - st,lsm303dlh-accel
+          - st,lsm303dlhc-accel
+          - st,lsm303dlm-accel
+          - st,lsm330-accel
+          - st,lsm330d-accel
+          - st,lsm330dl-accel
+          - st,lsm330dlc-accel
+      - description: Silan Accelerometers
+        enum:
+          - silan,sc7a20
+      - description: STMicroelectronics Gyroscopes
+        enum:
+          - st,l3g4200d-gyro
+          - st,l3g4is-gyro
+          - st,l3gd20-gyro
+          - st,l3gd20h-gyro
+          - st,lsm330-gyro
+          - st,lsm330d-gyro
+          - st,lsm330dl-gyro
+          - st,lsm330dlc-gyro
+          - st,lsm9ds0-gyro
+      - description: STMicroelectronics Magnetometers
+        enum:
+          - st,lis2mdl
+          - st,lis3mdl-magn
+          - st,lsm303agr-magn
+          - st,lsm303dlh-magn
+          - st,lsm303dlhc-magn
+          - st,lsm303dlm-magn
+          - st,lsm9ds1-magn
+      - description: STMicroelectronics Pressure Sensors
+        enum:
+          - st,lps001wp-press
+          - st,lps22df
+          - st,lps22hb-press
+          - st,lps22hh
+          - st,lps25h-press
+          - st,lps331ap-press
+          - st,lps33hw
+          - st,lps35hw
+      - description: IMUs
+        enum:
+          - st,lsm9ds0-imu
+      - description: Deprecated bindings
+        enum:
+          - st,lis302dl-spi
+          - st,lis3lv02d
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: interrupt line(s) connected to the DRDY line(s) and/or the
+      Intertial interrupt lines INT1 and INT2 if these exist. This means up to
+      three interrupts, and the DRDY must be the first one if it exists on
+      the package. The trigger edge of the interrupts is sometimes software
+      configurable in the hardware so the operating system should parse this
+      flag and set up the trigger edge as indicated in the device tree.
+    minItems: 1
+    maxItems: 2
+
+  vdd-supply: true
+  vddio-supply: true
+
+  st,drdy-int-pin:
+    description: the pin on the package that will be used to signal
+      "data ready" (valid values 1 or 2). This property is not configurable
+      on all sensors.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  drive-open-drain:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: the interrupt/data ready line will be configured
+      as open drain, which is useful if several sensors share the same
+      interrupt line. (This binding is taken from pinctrl.)
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            # These have no interrupts
+            - st,lps001wp
+    then:
+      properties:
+        interrupts: false
+        st,drdy-int-pin: false
+        drive-open-drain: false
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            # These have only DRDY
+            - st,lis2mdl
+            - st,lis3l02dq
+            - st,lis3lv02dl-accel
+            - st,lps22df
+            - st,lps22hb-press
+            - st,lps22hh
+            - st,lps25h-press
+            - st,lps33hw
+            - st,lps35hw
+            - st,lsm303agr-magn
+            - st,lsm303dlh-magn
+            - st,lsm303dlhc-magn
+            - st,lsm303dlm-magn
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        st,drdy-int-pin: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@1c {
+        compatible = "st,lis331dl-accel";
+        reg = <0x1c>;
+        st,drdy-int-pin = <1>;
+        vdd-supply = <&ldo1>;
+        vddio-supply = <&ldo2>;
+        interrupt-parent = <&gpio>;
+        interrupts = <18 IRQ_TYPE_EDGE_RISING>, <19 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      num-cs = <1>;
+
+      l3g4200d: gyroscope@0 {
+        compatible = "st,l3g4200d-gyro";
+        st,drdy-int-pin = <2>;
+        reg = <0>;
+        vdd-supply = <&vcc_io>;
+        vddio-supply = <&vcc_io>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
deleted file mode 100644
index 0ef64a444479..000000000000
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-STMicroelectronics MEMS sensors
-
-The STMicroelectronics sensor devices are pretty straight-forward I2C or
-SPI devices, all sharing the same device tree descriptions no matter what
-type of sensor it is.
-
-Required properties:
-- compatible: see the list of valid compatible strings below
-- reg: the I2C or SPI address the device will respond to
-
-Optional properties:
-- vdd-supply: an optional regulator that needs to be on to provide VDD
-  power to the sensor.
-- vddio-supply: an optional regulator that needs to be on to provide the
-  VDD IO power to the sensor.
-- st,drdy-int-pin: the pin on the package that will be used to signal
-  "data ready" (valid values: 1 or 2). This property is not configurable
-  on all sensors.
-- drive-open-drain: the interrupt/data ready line will be configured
-  as open drain, which is useful if several sensors share the same
-  interrupt line. (This binding is taken from pinctrl/pinctrl-bindings.txt)
-  This is a boolean property.
-
-Sensors may also have applicable pin control settings, those use the
-standard bindings from pinctrl/pinctrl-bindings.txt.
-
-Valid compatible strings:
-
-Accelerometers:
-- st,lis3lv02d (deprecated, use st,lis3lv02dl-accel)
-- st,lis302dl-spi (deprecated, use st,lis3lv02dl-accel)
-- st,lis3lv02dl-accel
-- st,lsm303dlh-accel
-- st,lsm303dlhc-accel
-- st,lis3dh-accel
-- st,lsm330d-accel
-- st,lsm330dl-accel
-- st,lsm330dlc-accel
-- st,lis331dl-accel
-- st,lis331dlh-accel
-- st,lsm303dl-accel
-- st,lsm303dlm-accel
-- st,lsm330-accel
-- st,lsm303agr-accel
-- st,lis2dh12-accel
-- st,h3lis331dl-accel
-- st,lng2dm-accel
-- st,lis3l02dq
-- st,lis2dw12
-- st,lis3dhh
-- st,lis3de
-- st,lis2de12
-
-Gyroscopes:
-- st,l3g4200d-gyro
-- st,lsm330d-gyro
-- st,lsm330dl-gyro
-- st,lsm330dlc-gyro
-- st,l3gd20-gyro
-- st,l3gd20h-gyro
-- st,l3g4is-gyro
-- st,lsm330-gyro
-- st,lsm9ds0-gyro
-
-Magnetometers:
-- st,lsm303agr-magn
-- st,lsm303dlh-magn
-- st,lsm303dlhc-magn
-- st,lsm303dlm-magn
-- st,lis3mdl-magn
-- st,lis2mdl
-- st,lsm9ds1-magn
-
-Pressure sensors:
-- st,lps001wp-press
-- st,lps25h-press
-- st,lps331ap-press
-- st,lps22hb-press
-- st,lps33hw
-- st,lps35hw
-- st,lps22hh
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index d4922f9f0376..722781aa4697 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -42,10 +42,9 @@ properties:
       0 - 50/60Hz rejection
       1 - 60Hz rejection
       2 - 50Hz rejection
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 2
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 2
 
   '#address-cells':
     const: 1
@@ -91,8 +90,7 @@ patternProperties:
           7 - Type T Thermocouple
           8 - Type B Thermocouple
           9 - Custom Thermocouple
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 1
         maximum: 9
 
@@ -121,14 +119,12 @@ patternProperties:
           more details look at table 69 and 70.
           Note should be signed, but dtc doesn't currently maintain the
           sign.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        minItems: 3
+        maxItems: 64
         items:
-          minItems: 3
-          maxItems: 64
-          items:
-            minItems: 2
-            maxItems: 2
+          minItems: 2
+          maxItems: 2
 
   "^diode@":
     type: object
@@ -139,8 +135,7 @@ patternProperties:
     properties:
       adi,sensor-type:
         description: Identifies the sensor as a diode.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         const: 28
 
       adi,single-ended:
@@ -197,8 +192,7 @@ patternProperties:
           16 - RTD PT-1000 (0.00375)
           17 - RTD NI-120
           18 - RTD Custom
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 10
         maximum: 18
 
@@ -211,9 +205,8 @@ patternProperties:
         description:
           Identifies the number of wires used by the RTD. Setting this
           property to 5 means 4 wires with Kelvin Rsense.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [2, 3, 4, 5]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [2, 3, 4, 5]
 
       adi,rsense-share:
         description:
@@ -238,18 +231,16 @@ patternProperties:
         description:
           This property set the RTD curve used and the corresponding
           Callendar-VanDusen constants. Look at table 30 of the datasheet.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 0
-            maximum: 3
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
 
       adi,custom-rtd:
         description:
           This is a table, where each entry should be a pair of
           resistance(ohm)-temperature(K). The entries added here are in uohm
           and uK. For more details values look at table 74 and 75.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
         items:
           minItems: 3
           maxItems: 64
@@ -261,7 +252,7 @@ patternProperties:
       - adi,rsense-handle
 
     dependencies:
-      adi,current-rotate: [ adi,rsense-share ]
+      adi,current-rotate: [ "adi,rsense-share" ]
 
   "^thermistor@":
     type: object
@@ -281,8 +272,7 @@ patternProperties:
           25 - Thermistor Spectrum 1003k 1kohm
           26 - Thermistor Custom Steinhart-Hart
           27 - Custom Thermistor
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 19
         maximum: 27
 
@@ -315,10 +305,9 @@ patternProperties:
           This property controls the magnitude of the excitation current
           applied to the thermistor. Value 0 set's the sensor in auto-range
           mode.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
-                   250000, 500000, 1000000]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
+               500000, 1000000]
 
       adi,custom-thermistor:
         description:
@@ -326,14 +315,12 @@ patternProperties:
           resistance(ohm)-temperature(K). The entries added here are in uohm
           and uK only for custom thermistors. For more details look at table
           78 and 79.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        minItems: 3
+        maxItems: 64
         items:
-          minItems: 3
-          maxItems: 64
-          items:
-            minItems: 2
-            maxItems: 2
+          minItems: 2
+          maxItems: 2
 
       adi,custom-steinhart:
         description:
@@ -341,8 +328,7 @@ patternProperties:
           be programmed into the device memory using this property. For
           Steinhart sensors the coefficients are given in the raw
           format. Look at table 82 for more information.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        $ref: /schemas/types.yaml#/definitions/uint32-array
         items:
           minItems: 6
           maxItems: 6
@@ -351,7 +337,7 @@ patternProperties:
       - adi,rsense-handle
 
     dependencies:
-      adi,current-rotate: [ adi,rsense-share ]
+      adi,current-rotate: [ "adi,rsense-share" ]
 
   "^adc@":
     type: object
@@ -360,8 +346,7 @@ patternProperties:
     properties:
       adi,sensor-type:
         description: Identifies the sensor as a direct adc.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         const: 30
 
       adi,single-ended:
@@ -381,8 +366,7 @@ patternProperties:
 
       adi,sensor-type:
         description: Identifies the sensor as a rsense.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         const: 29
 
       adi,rsense-val-milli-ohms:
@@ -398,6 +382,8 @@ required:
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -462,17 +448,17 @@ examples:
                         reg = <20>;
                         adi,sensor-type = <9>; //custom thermocouple
                         adi,single-ended;
-                        adi,custom-thermocouple = /bits/ 64
-                                 <(-50220000) 0
-                                  (-30200000) 99100000
-                                  (-5300000) 135400000
-                                  0 273150000
-                                  40200000 361200000
-                                  55300000 522100000
-                                  88300000 720300000
-                                  132200000 811200000
-                                  188700000 922500000
-                                  460400000 1000000000>; //10 pairs
+                        adi,custom-thermocouple =
+                                 /bits/ 64 <(-50220000) 0>,
+                                 /bits/ 64 <(-30200000) 99100000>,
+                                 /bits/ 64 <(-5300000) 135400000>,
+                                 /bits/ 64 <0 273150000>,
+                                 /bits/ 64 <40200000 361200000>,
+                                 /bits/ 64 <55300000 522100000>,
+                                 /bits/ 64 <88300000 720300000>,
+                                 /bits/ 64 <132200000 811200000>,
+                                 /bits/ 64 <188700000 922500000>,
+                                 /bits/ 64 <460400000 1000000000>; //10 pairs
                };
 
         };
diff --git a/Documentation/devicetree/bindings/iio/temperature/max31856.txt b/Documentation/devicetree/bindings/iio/temperature/max31856.txt
deleted file mode 100644
index 06ab43bb4de8..000000000000
--- a/Documentation/devicetree/bindings/iio/temperature/max31856.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Maxim MAX31856 thermocouple support
-
-https://datasheets.maximintegrated.com/en/ds/MAX31856.pdf
-
-Optional property:
-	- thermocouple-type: Type of thermocouple (THERMOCOUPLE_TYPE_K if
-		omitted). Supported types are B, E, J, K, N, R, S, T.
-
-Required properties:
-	- compatible: must be "maxim,max31856"
-	- reg: SPI chip select number for the device
-	- spi-max-frequency: As per datasheet max. supported freq is 5000000
-	- spi-cpha: must be defined for max31856 to enable SPI mode 1
-
-	Refer to spi/spi-bus.txt for generic SPI slave bindings.
-
- Example:
-	temp-sensor@0 {
-		compatible = "maxim,max31856";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-		spi-cpha;
-		thermocouple-type = <THERMOCOUPLE_TYPE_K>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
new file mode 100644
index 000000000000..0805ed7e2113
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/maxim,max31855k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX31855 and similar thermocouples
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description: |
+  https://datasheets.maximintegrated.com/en/ds/MAX6675.pdf
+  https://datasheets.maximintegrated.com/en/ds/MAX31855.pdf
+
+properties:
+  compatible:
+    description:
+      The generic maxim,max31855 compatible is deprecated in favour of
+      the thermocouple type specific variants.
+    enum:
+      - maxim,max6675
+      - maxim,max31855
+      - maxim,max31855k
+      - maxim,max31855j
+      - maxim,max31855n
+      - maxim,max31855s
+      - maxim,max31855t
+      - maxim,max31855e
+      - maxim,max31855r
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max6675
+    then:
+      required:
+        - spi-cpha
+    else:
+      properties:
+        spi-cpha: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temp-sensor@0 {
+            compatible = "maxim,max31855k";
+            reg = <0>;
+            spi-max-frequency = <4300000>;
+        };
+        temp-sensor@1 {
+            compatible = "maxim,max6675";
+            reg = <1>;
+            spi-max-frequency = <4300000>;
+            spi-cpha;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
new file mode 100644
index 000000000000..228a94165487
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/maxim,max31856.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX31856 thermocouple support
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  https://datasheets.maximintegrated.com/en/ds/MAX31856.pdf
+
+properties:
+  compatible:
+    const: maxim,max31856
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  thermocouple-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Type of thermocouple (THERMOCOUPLE_TYPE_K if omitted).
+      Use defines in dt-bindings/iio/temperature/thermocouple.h.
+      Supported types are B, E, J, K, N, R, S, T.
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/temperature/thermocouple.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temp-sensor@0 {
+            compatible = "maxim,max31856";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpha;
+            thermocouple-type = <THERMOCOUPLE_TYPE_K>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
new file mode 100644
index 000000000000..a2823ed6867b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/maxim,max31865.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX31865 Resistance Temperature Detector.
+
+maintainers:
+  - Navin Sankar Velliangiri <navin@linumiz.com>
+
+description: |
+  https://datasheets.maximintegrated.com/en/ds/MAX31865.pdf
+
+properties:
+  compatible:
+    const: maxim,max31865
+
+  reg:
+    maxItems: 1
+
+  maxim,3-wire:
+    description:
+      Identifies the number of wires used by the RTD. Setting this property
+      enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection.
+    type: boolean
+
+  spi-cpha: true
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       temp_sensor@0 {
+         compatible = "maxim,max31865";
+         reg = <0>;
+         spi-max-frequency = <400000>;
+         spi-cpha;
+         maxim,3-wire;
+       };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt b/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt
deleted file mode 100644
index bb85cd0e039c..000000000000
--- a/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Maxim thermocouple support
-
-* https://datasheets.maximintegrated.com/en/ds/MAX6675.pdf
-* https://datasheets.maximintegrated.com/en/ds/MAX31855.pdf
-
-Required properties:
-
-	- compatible: must be "maxim,max6675" or one of the following:
-	   "maxim,max31855k", "maxim,max31855j", "maxim,max31855n",
-	   "maxim,max31855s", "maxim,max31855t", "maxim,max31855e",
-	   "maxim,max31855r"; the generic "max,max31855" is deprecated.
-	- reg: SPI chip select number for the device
-	- spi-max-frequency: must be 4300000
-	- spi-cpha: must be defined for max6675 to enable SPI mode 1
-
-	Refer to spi/spi-bus.txt for generic SPI slave bindings.
-
-Example:
-
-	max31855@0 {
-		compatible = "maxim,max31855k";
-		reg = <0>;
-		spi-max-frequency = <4300000>;
-	};
diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
new file mode 100644
index 000000000000..d6965a0c1cf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90614.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Melexis MLX90614 contactless IR temperature sensor
+
+maintainers:
+  - Peter Meerwald <pmeerw@pmeerw.net>
+  - Crt Mori <cmo@melexis.com>
+
+description: |
+  http://melexis.com/Infrared-Thermometer-Sensors/Infrared-Thermometer-Sensors/MLX90614-615.aspx
+
+properties:
+  compatible:
+    const: melexis,mlx90614
+
+  reg:
+    maxItems: 1
+
+  wakeup-gpios:
+    description:
+      GPIO connected to the SDA line to hold low in order to wake up the
+      device.  In normal operation, the GPIO is set as input and will
+      not interfere in I2C communication.  There is no need for a GPIO
+      driving the SCL line.  If no GPIO is given, power management is disabled.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temp-sensor@5a {
+            compatible = "melexis,mlx90614";
+            reg = <0x5a>;
+            wakeup-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
new file mode 100644
index 000000000000..4a55e7f25ae7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90632.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Melexis MLX90632 contactless Infra Red temperature sensor
+
+maintainers:
+  - Crt Mori <cmo@melexis.com>
+
+description: |
+  https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90632
+
+  There are various applications for the Infra Red contactless temperature
+  sensor and MLX90632 is most suitable for consumer applications where
+  measured object temperature is in range between -20 to 200 degrees
+  Celsius with relative error of measurement below 1 degree Celsius in
+  object temperature range for industrial applications. Since it can
+  operate and measure ambient temperature in range of -20 to 85 degrees
+  Celsius it is suitable also for outdoor use.
+
+  Be aware that electronics surrounding the sensor can increase ambient
+  temperature. MLX90632 can be calibrated to reduce the housing effect via
+  already existing EEPROM parameters.
+
+  Since measured object emissivity effects Infra Red energy emitted,
+  emissivity should be set before requesting the object temperature.
+
+properties:
+  compatible:
+    const: melexis,mlx90632
+
+  reg:
+    maxItems: 1
+    description: Default is 0x3a, but can be reprogrammed.
+
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temp-sensor@3a {
+            compatible = "melexis,mlx90632";
+            reg = <0x3a>;
+            vdd-supply = <&ldo4_reg>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt b/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt
deleted file mode 100644
index 9be57b036092..000000000000
--- a/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Melexis MLX90614 contactless IR temperature sensor
-
-http://melexis.com/Infrared-Thermometer-Sensors/Infrared-Thermometer-Sensors/MLX90614-615.aspx
-
-Required properties:
-
-  - compatible: should be "melexis,mlx90614"
-  - reg: the I2C address of the sensor
-
-Optional properties:
-
-  - wakeup-gpios: device tree identifier of the GPIO connected to the SDA line
-      to hold low in order to wake up the device.  In normal operation, the
-      GPIO is set as input and will not interfere in I2C communication.  There
-      is no need for a GPIO driving the SCL line.  If no GPIO is given, power
-      management is disabled.
-
-Example:
-
-mlx90614@5a {
-	compatible = "melexis,mlx90614";
-	reg = <0x5a>;
-	wakeup-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt b/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt
deleted file mode 100644
index 0b05812001f8..000000000000
--- a/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Melexis MLX90632 contactless Infra Red temperature sensor
-
-Link to datasheet: https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90632
-
-There are various applications for the Infra Red contactless temperature sensor
-and MLX90632 is most suitable for consumer applications where measured object
-temperature is in range between -20 to 200 degrees Celsius with relative error
-of measurement below 1 degree Celsius in object temperature range for
-industrial applications. Since it can operate and measure ambient temperature
-in range of -20 to 85 degrees Celsius it is suitable also for outdoor use.
-
-Be aware that electronics surrounding the sensor can increase ambient
-temperature. MLX90632 can be calibrated to reduce the housing effect via
-already existing EEPROM parameters.
-
-Since measured object emissivity effects Infra Red energy emitted, emissivity
-should be set before requesting the object temperature.
-
-Required properties:
-  - compatible: should be "melexis,mlx90632"
-  - reg: the I2C address of the sensor (default 0x3a)
-
-Example:
-
-mlx90632@3a {
-	compatible = "melexis,mlx90632";
-	reg = <0x3a>;
-};
diff --git a/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt b/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt
deleted file mode 100644
index 8f339cab74ae..000000000000
--- a/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-If the temperature sensor device can be configured to use some specific
-thermocouple type, you can use the defined types provided in the file
-"include/dt-bindings/iio/temperature/thermocouple.h".
-
-Property:
-thermocouple-type:	A single cell representing the type of the thermocouple
-			used by the device.
diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp007.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp007.yaml
new file mode 100644
index 000000000000..3c2b7189fa2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp007.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/ti,tmp007.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR thermopile sensor with integrated math engine
+
+maintainers:
+  - Manivannan Sadhasivam <manivannanece23@gmail.com>
+
+description: |
+  http://www.ti.com/lit/ds/symlink/tmp007.pdf
+
+properties:
+  compatible:
+    const: ti,tmp007
+
+  reg:
+    description: |
+      The I2C address of the sensor (changeable via ADR pins)
+      ------------------------------
+      |ADR1 | ADR0 | Device Address|
+      ------------------------------
+         0      0        0x40
+         0      1        0x41
+         0     SDA       0x42
+         0     SCL       0x43
+         1      0        0x44
+         1      1        0x45
+         1     SDA       0x46
+         1     SCL       0x47
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temp-sensor@40 {
+            compatible = "ti,tmp007";
+            reg = <0x40>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <5 0x08>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
new file mode 100644
index 000000000000..347bc16a4671
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: "TI TMP117 - Digital temperature sensor with integrated NV memory"
+
+description: |
+    TI TMP117 - Digital temperature sensor with integrated NV memory that supports
+    I2C interface.
+      https://www.ti.com/lit/gpn/tmp1
+
+maintainers:
+  - Puranjay Mohan <puranjay12@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp117
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tmp117@48 {
+             compatible = "ti,tmp117";
+             reg = <0x48>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
deleted file mode 100644
index da0af234a357..000000000000
--- a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* TI TMP007 - IR thermopile sensor with integrated math engine
-
-Link to datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf
-
-Required properties:
-
-  - compatible: should be "ti,tmp007"
-  - reg: the I2C address of the sensor (changeable via ADR pins)
-		------------------------------
-		|ADR1 | ADR0 | Device Address|
-		------------------------------
-		   0      0        0x40
-		   0	  1	   0x41
-		   0	 SDA       0x42
-		   0     SCL       0x43
-		   1      0        0x44
-		   1      1        0x45
-		   1	 SDA	   0x46
-		   1     SCL       0x47
-
-Optional properties:
-
-  - interrupts: interrupt mapping for GPIO IRQ (level active low)
-
-Example:
-
-tmp007@40 {
-        compatible = "ti,tmp007";
-        reg = <0x40>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <5 0x08>;
-};
-
diff --git a/Documentation/devicetree/bindings/iio/temperature/tsys01.txt b/Documentation/devicetree/bindings/iio/temperature/tsys01.txt
deleted file mode 100644
index 0d5cc5595d0c..000000000000
--- a/Documentation/devicetree/bindings/iio/temperature/tsys01.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* TSYS01 - Measurement Specialties temperature sensor
-
-Required properties:
-
-	- compatible: should be "meas,tsys01"
-	- reg: I2C address of the sensor (changeable via CSB pin)
-
-		------------------------
-		| CSB | Device Address |
-		------------------------
-		   1         0x76
-		   0	     0x77
-
-Example:
-
-tsys01@76 {
-	compatible = "meas,tsys01";
-	reg = <0x76>;
-};
diff --git a/Documentation/devicetree/bindings/index.rst b/Documentation/devicetree/bindings/index.rst
new file mode 100644
index 000000000000..d9002a3a0abb
--- /dev/null
+++ b/Documentation/devicetree/bindings/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. toctree::
+   :maxdepth: 1
+
+   ABI
+   writing-bindings
+   writing-schema
+   submitting-patches
diff --git a/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt b/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt
index 84f1a1b505d2..be31cf05cd2e 100644
--- a/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt
+++ b/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt
@@ -1,7 +1,7 @@
 Hisilicon RoCE DT description
 
 Hisilicon RoCE engine is a part of network subsystem.
-It works depending on other part of network wubsytem, such as, gmac and
+It works depending on other part of network subsystem, such as gmac and
 dsa fabric.
 
 Additional properties are described here:
diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
new file mode 100644
index 000000000000..da0f8dfca8bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/adc-joystick.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ADC attached joystick
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+description: >
+  Bindings for joystick devices connected to ADC controllers supporting
+  the Industrial I/O subsystem.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: adc-joystick
+
+  io-channels:
+    minItems: 1
+    maxItems: 1024
+    description: >
+      List of phandle and IIO specifier pairs.
+      Each pair defines one ADC channel to which a joystick axis is connected.
+      See
+      https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
+      for details.
+
+  poll-interval: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - io-channels
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+patternProperties:
+  "^axis@[0-9a-f]+$":
+    type: object
+    $ref: input.yaml#
+    description: >
+      Represents a joystick axis bound to the given ADC channel.
+      For each entry in the io-channels list, one axis subnode with a matching
+      reg property must be specified.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1023
+        description: Index of an io-channels list entry bound to this axis.
+
+      linux,code:
+        description: EV_ABS specific event code generated by the axis.
+
+      abs-range:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: minimum value
+          - description: maximum value
+        description: >
+          Minimum and maximum values produced by the axis.
+          For an ABS_X axis this will be the left-most and right-most
+          inclination of the joystick. If min > max, it is left to userspace to
+          treat the axis as inverted.
+          This property is interpreted as two signed 32 bit values.
+
+      abs-fuzz:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Amount of noise in the input value.
+          Omitting this property indicates the axis is precise.
+
+      abs-flat:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Axial "deadzone", or area around the center position, where the axis
+          is considered to be at rest.
+          Omitting this property indicates the axis always returns to exactly
+          the center position.
+
+    required:
+      - reg
+      - linux,code
+      - abs-range
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+    #include <dt-bindings/input/input.h>
+
+    joystick: adc-joystick {
+      compatible = "adc-joystick";
+      io-channels = <&adc INGENIC_ADC_TOUCH_XP>,
+                    <&adc INGENIC_ADC_TOUCH_YP>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      axis@0 {
+              reg = <0>;
+              linux,code = <ABS_X>;
+              abs-range = <3300 0>;
+              abs-fuzz = <4>;
+              abs-flat = <200>;
+      };
+      axis@1 {
+              reg = <1>;
+              linux,code = <ABS_Y>;
+              abs-range = <0 3300>;
+              abs-fuzz = <4>;
+              abs-flat = <200>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/adc-keys.txt b/Documentation/devicetree/bindings/input/adc-keys.txt
deleted file mode 100644
index e551814629b4..000000000000
--- a/Documentation/devicetree/bindings/input/adc-keys.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-ADC attached resistor ladder buttons
-------------------------------------
-
-Required properties:
- - compatible: "adc-keys"
- - io-channels: Phandle to an ADC channel
- - io-channel-names = "buttons";
- - keyup-threshold-microvolt: Voltage at which all the keys are considered up.
-
-Optional properties:
-	- poll-interval: Poll interval time in milliseconds
-	- autorepeat: Boolean, Enable auto repeat feature of Linux input
-	  subsystem.
-
-Each button (key) is represented as a sub-node of "adc-keys":
-
-Required subnode-properties:
-	- label: Descriptive name of the key.
-	- linux,code: Keycode to emit.
-	- press-threshold-microvolt: Voltage ADC input when this key is pressed.
-
-Example:
-
-#include <dt-bindings/input/input.h>
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&lradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <2000000>;
-
-		button-up {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			press-threshold-microvolt = <1500000>;
-		};
-
-		button-down {
-			label = "Volume Down";
-			linux,code = <KEY_VOLUMEDOWN>;
-			press-threshold-microvolt = <1000000>;
-		};
-
-		button-enter {
-			label = "Enter";
-			linux,code = <KEY_ENTER>;
-			press-threshold-microvolt = <500000>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/input/adc-keys.yaml b/Documentation/devicetree/bindings/input/adc-keys.yaml
new file mode 100644
index 000000000000..7aa078dead37
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-keys.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adc-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC attached resistor ladder buttons
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: adc-keys
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: buttons
+
+  keyup-threshold-microvolt:
+    description:
+      Voltage above or equal to which all the keys are considered up.
+
+  poll-interval: true
+  autorepeat: true
+
+patternProperties:
+  '^button-':
+    type: object
+    $ref: input.yaml#
+    additionalProperties: false
+    description:
+      Each button (key) is represented as a sub-node.
+
+    properties:
+      label: true
+
+      linux,code: true
+
+      press-threshold-microvolt:
+        description:
+          Voltage above or equal to which this key is considered pressed. No
+          two values of press-threshold-microvolt may be the same. All values
+          of press-threshold-microvolt must be less than
+          keyup-threshold-microvolt.
+
+    required:
+      - linux,code
+      - press-threshold-microvolt
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - keyup-threshold-microvolt
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    // +--------------------------------+------------------------+
+    // | 2.000.000 <= value             | no key pressed         |
+    // +--------------------------------+------------------------+
+    // | 1.500.000 <= value < 2.000.000 | KEY_VOLUMEUP pressed   |
+    // +--------------------------------+------------------------+
+    // | 1.000.000 <= value < 1.500.000 | KEY_VOLUMEDOWN pressed |
+    // +--------------------------------+------------------------+
+    // |   500.000 <= value < 1.000.000 | KEY_ENTER pressed      |
+    // +--------------------------------+------------------------+
+    // |              value <   500.000 | no key pressed         |
+    // +--------------------------------+------------------------+
+
+    adc-keys {
+        compatible = "adc-keys";
+        io-channels = <&lradc 0>;
+        io-channel-names = "buttons";
+        keyup-threshold-microvolt = <2000000>;
+
+        button-up {
+            label = "Volume Up";
+            linux,code = <KEY_VOLUMEUP>;
+            press-threshold-microvolt = <1500000>;
+        };
+
+        button-down {
+            label = "Volume Down";
+            linux,code = <KEY_VOLUMEDOWN>;
+            press-threshold-microvolt = <1000000>;
+        };
+
+        button-enter {
+            label = "Enter";
+            linux,code = <KEY_ENTER>;
+            press-threshold-microvolt = <500000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
new file mode 100644
index 000000000000..26ea66834ae2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adi,adp5588.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP5588 Keypad Controller
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices Mobile I/O Expander and QWERTY Keypad Controller
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADP5588.pdf
+
+allOf:
+  - $ref: matrix-keymap.yaml#
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adp5587
+      - adi,adp5588
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Supply Voltage Input
+
+  reset-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10.
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10.
+
+  '#interrupt-cells':
+    const: 2
+
+  adi,unlock-keys:
+    description:
+      Specifies a maximum of 2 keys that can be used to unlock the keypad.
+      If this property is set, the keyboard will be locked and only unlocked
+      after these keys are pressed. If only one key is set, a double click is
+      needed to unlock the keypad. The value of this property cannot be bigger
+      or equal than keypad,num-rows * keypad,num-columns.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - keypad,num-rows
+  - keypad,num-columns
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        keys@34 {
+            compatible = "adi,adp5588";
+            reg = <0x34>;
+
+            vcc-supply = <&vcc>;
+            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+
+            keypad,num-rows = <1>;
+            keypad,num-columns = <9>;
+            linux,keymap = <
+                MATRIX_KEY(0x00, 0x00, KEY_1)
+                MATRIX_KEY(0x00, 0x01, KEY_2)
+                MATRIX_KEY(0x00, 0x02, KEY_3)
+                MATRIX_KEY(0x00, 0x03, KEY_4)
+                MATRIX_KEY(0x00, 0x04, KEY_5)
+                MATRIX_KEY(0x00, 0x05, KEY_6)
+                MATRIX_KEY(0x00, 0x06, KEY_7)
+                MATRIX_KEY(0x00, 0x07, KEY_8)
+                MATRIX_KEY(0x00, 0x08, KEY_9)
+            >;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index 5b3b71c9c018..5d631f7137e7 100644
--- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/allwinner,sun4i-a10-lradc-keys.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 LRADC Device Tree Bindings
+title: Allwinner A10 LRADC
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -16,12 +16,22 @@ properties:
       - const: allwinner,sun4i-a10-lradc-keys
       - const: allwinner,sun8i-a83t-r-lradc
       - items:
-        - const: allwinner,sun50i-a64-lradc
-        - const: allwinner,sun8i-a83t-r-lradc
+          - const: allwinner,sun50i-a64-lradc
+          - const: allwinner,sun8i-a83t-r-lradc
+      - const: allwinner,sun50i-r329-lradc
+      - items:
+          - const: allwinner,sun20i-d1-lradc
+          - const: allwinner,sun50i-r329-lradc
 
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
   interrupts:
     maxItems: 1
 
@@ -29,22 +39,22 @@ properties:
     description:
       Regulator for the LRADC reference voltage
 
+  wakeup-source: true
+
 patternProperties:
   "^button-[0-9]+$":
     type: object
+    $ref: input.yaml#
     properties:
       label:
         $ref: /schemas/types.yaml#/definitions/string
         description: Descriptive name of the key
 
-      linux,code:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Keycode to emit
+      linux,code: true
 
       channel:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
         description: ADC Channel this key is attached to
 
       voltage:
@@ -67,6 +77,18 @@ required:
   - interrupts
   - vref-supply
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun50i-r329-lradc
+
+then:
+  required:
+    - clocks
+    - resets
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
new file mode 100644
index 000000000000..442f623bb294
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ariel-pwrbutton.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dell Wyse 3020 a.k.a. "Ariel" Power Button
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+  The ENE Embedded Controller on the Ariel board has an interface to the
+  SPI bus that is capable of sending keyboard and mouse data. A single
+  power button is attached to it. This binding describes this
+  configuration.
+
+allOf:
+  - $ref: input.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: dell,wyse-ariel-ec-input
+      - const: ene,kb3930-input
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-button@0 {
+            compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input";
+            reg = <0>;
+            interrupt-parent = <&gpio>;
+            interrupts = <60 IRQ_TYPE_EDGE_RISING>;
+            spi-max-frequency = <33000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
deleted file mode 100644
index c88919480d37..000000000000
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Atmel maXTouch touchscreen/touchpad
-
-Required properties:
-- compatible:
-    atmel,maxtouch
-
-    The following compatibles have been used in various products but are
-    deprecated:
-	atmel,qt602240_ts
-	atmel,atmel_mxt_ts
-	atmel,atmel_mxt_tp
-	atmel,mXT224
-
-- reg: The I2C address of the device
-
-- interrupts: The sink for the touchpad's IRQ output
-    See ../interrupt-controller/interrupts.txt
-
-Optional properties for main touchpad device:
-
-- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages
-    on GPIO bit changes. An array of up to 8 entries can be provided
-    indicating the Linux keycode mapped to each bit of the status byte,
-    starting at the LSB. Linux keycodes are defined in
-    <dt-bindings/input/input.h>.
-
-    Note: the numbering of the GPIOs and the bit they start at varies between
-    maXTouch devices. You must either refer to the documentation, or
-    experiment to determine which bit corresponds to which input. Use
-    KEY_RESERVED for unused padding values.
-
-- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
-
-Example:
-
-	touch@4b {
-		compatible = "atmel,maxtouch";
-		reg = <0x4b>;
-		interrupt-parent = <&gpio>;
-		interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
new file mode 100644
index 000000000000..3ec579d63570
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/atmel,maxtouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel maXTouch touchscreen/touchpad
+
+maintainers:
+  - Nick Dyer <nick@shmanahar.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Atmel maXTouch touchscreen or touchpads such as the mXT244
+  and similar devices.
+
+properties:
+  compatible:
+    const: atmel,maxtouch
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdda-supply:
+    description:
+      Optional regulator for the AVDD analog voltage.
+
+  vdd-supply:
+    description:
+      Optional regulator for the VDD digital voltage.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Optional GPIO specifier for the touchscreen's reset pin
+      (active low). The line must be flagged with
+      GPIO_ACTIVE_LOW.
+
+  wake-gpios:
+    maxItems: 1
+    description:
+      Optional GPIO specifier for the touchscreen's wake pin
+      (active low). The line must be flagged with
+      GPIO_ACTIVE_LOW.
+
+  linux,gpio-keymap:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      When enabled, the SPT_GPIOPWN_T19 object sends messages
+      on GPIO bit changes. An array of up to 8 entries can be provided
+      indicating the Linux keycode mapped to each bit of the status byte,
+      starting at the LSB. Linux keycodes are defined in
+      <dt-bindings/input/input.h>.
+
+      Note: the numbering of the GPIOs and the bit they start at varies
+      between maXTouch devices. You must either refer to the documentation,
+      or experiment to determine which bit corresponds to which input. Use
+      KEY_RESERVED for unused padding values.
+
+  atmel,wakeup-method:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The WAKE line is an active-low input that is used to wake up the touch
+      controller from deep-sleep mode before communication with the controller
+      could be started. This optional feature used to minimize current
+      consumption when the controller is in deep sleep mode. This feature is
+      relevant only to some controller families, like mXT1386 controller for
+      example.
+
+      The WAKE pin can be connected in one of the following ways:
+       1) left permanently low
+       2) connected to the I2C-compatible SCL pin
+       3) connected to a GPIO pin on the host
+    enum:
+      - 0 # ATMEL_MXT_WAKEUP_NONE
+      - 1 # ATMEL_MXT_WAKEUP_I2C_SCL
+      - 2 # ATMEL_MXT_WAKEUP_GPIO
+    default: 0
+
+  wakeup-source:
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/atmel-maxtouch.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@4a {
+        compatible = "atmel,maxtouch";
+        reg = <0x4a>;
+        interrupt-parent = <&gpio>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+        vdda-supply = <&ab8500_ldo_aux2_reg>;
+        vdd-supply = <&ab8500_ldo_aux5_reg>;
+        atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
new file mode 100644
index 000000000000..02e605fac408
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
@@ -0,0 +1,955 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/azoteq,iqs7222.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS7222A/B/C Capacitive Touch Controller
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS7222A, IQS7222B and IQS7222C are multichannel capacitive touch
+  controllers that feature additional sensing capabilities.
+
+  Link to datasheets: https://www.azoteq.com/
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs7222a
+      - azoteq,iqs7222b
+      - azoteq,iqs7222c
+
+  reg:
+    maxItems: 1
+
+  irq-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low RDY output.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low MCLR input. The
+      device is temporarily held in hardware reset prior to initialization if
+      this property is present.
+
+  azoteq,max-counts:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Specifies the maximum number of conversion periods (counts) that can be
+      reported as follows:
+      0: 1023
+      1: 2047
+      2: 4095
+      3: 16384
+
+  azoteq,auto-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Specifies the number of conversions to occur before an interrupt is
+      generated as follows:
+      0: 4
+      1: 8
+      2: 16
+      3: 32
+
+  azoteq,ati-frac-div-fine:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Specifies the preloaded ATI fine fractional divider.
+
+  azoteq,ati-frac-div-coarse:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Specifies the preloaded ATI coarse fractional divider.
+
+  azoteq,ati-comp-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1023
+    description: Specifies the preloaded ATI compensation selection.
+
+  azoteq,lta-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter damping factor to be applied during
+      low-power mode.
+
+  azoteq,lta-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter damping factor to be applied during
+      normal-power mode.
+
+  azoteq,counts-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the counts filter damping factor to be applied during low-power
+      mode.
+
+  azoteq,counts-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the counts filter damping factor to be applied during normal-
+      power mode.
+
+  azoteq,lta-fast-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter fast damping factor to be applied
+      during low-power mode.
+
+  azoteq,lta-fast-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter fast damping factor to be applied
+      during normal-power mode.
+
+  azoteq,timeout-ati-ms:
+    multipleOf: 500
+    minimum: 0
+    maximum: 32767500
+    description:
+      Specifies the delay (in ms) before ATI is retried following an ATI error.
+
+  azoteq,rate-ati-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the rate (in ms) at which ATI status is evaluated.
+
+  azoteq,timeout-np-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from normal-power mode to low-power mode.
+
+  azoteq,rate-np-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during normal-power mode.
+
+  azoteq,timeout-lp-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from low-power mode to ultra-low-power mode.
+
+  azoteq,rate-lp-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during low-power mode.
+
+  azoteq,timeout-ulp-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the rate (in ms) at which channels not regularly sampled during
+      ultra-low-power mode are updated.
+
+  azoteq,rate-ulp-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+patternProperties:
+  "^cycle-[0-9]$":
+    type: object
+    description: Represents a conversion cycle serving two sensing channels.
+
+    properties:
+      azoteq,conv-period:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the cycle's conversion period.
+
+      azoteq,conv-frac:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the cycle's conversion frequency fraction.
+
+      azoteq,tx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 9
+        items:
+          minimum: 0
+          maximum: 8
+        description: Specifies the CTx pin(s) associated with the cycle.
+
+      azoteq,rx-float-inactive:
+        type: boolean
+        description: Floats any inactive CRx pins instead of grounding them.
+
+      azoteq,dead-time-enable:
+        type: boolean
+        description:
+          Increases the denominator of the conversion frequency formula by one.
+
+      azoteq,tx-freq-fosc:
+        type: boolean
+        description:
+          Fixes the conversion frequency to that of the device's core clock.
+
+      azoteq,vbias-enable:
+        type: boolean
+        description: Enables the bias voltage for use during inductive sensing.
+
+      azoteq,sense-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the cycle's sensing mode as follows:
+          0: None
+          1: Self capacitive
+          2: Mutual capacitive
+          3: Inductive
+
+          Note that in the case of IQS7222A, cycles 5 and 6 are restricted to
+          Hall-effect sensing.
+
+      azoteq,iref-enable:
+        type: boolean
+        description:
+          Enables the current reference for use during various sensing modes.
+
+      azoteq,iref-level:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the cycle's current reference level.
+
+      azoteq,iref-trim:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the cycle's current reference trim.
+
+    dependencies:
+      azoteq,iref-level: ["azoteq,iref-enable"]
+      azoteq,iref-trim: ["azoteq,iref-enable"]
+
+    additionalProperties: false
+
+  "^channel-([0-9]|1[0-9])$":
+    type: object
+    description:
+      Represents a single sensing channel. A channel is active if defined and
+      inactive otherwise.
+
+      Note that in the case of IQS7222A, channels 10 and 11 are restricted to
+      Hall-effect sensing with events reported on channel 10 only.
+
+    properties:
+      azoteq,ulp-allow:
+        type: boolean
+        description:
+          Permits the device to enter ultra-low-power mode while the channel
+          lies in a state of touch or proximity.
+
+      azoteq,ref-select:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 9
+        description: Specifies a separate reference channel to be followed.
+
+      azoteq,ref-weight:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the relative weight of the reference channel.
+
+      azoteq,use-prox:
+        type: boolean
+        description:
+          Activates the reference channel in response to proximity events
+          instead of touch events.
+
+      azoteq,ati-band:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the channel's ATI band as a fraction of its ATI target as
+          follows:
+          0: 1/16
+          1: 1/8
+          2: 1/4
+          3: 1/2
+
+      azoteq,global-halt:
+        type: boolean
+        description:
+          Specifies that the channel's long-term average is to freeze if any
+          other participating channel lies in a proximity or touch state.
+
+      azoteq,invert-enable:
+        type: boolean
+        description:
+          Inverts the polarity of the states reported for proximity and touch
+          events relative to their respective thresholds.
+
+      azoteq,dual-direction:
+        type: boolean
+        description:
+          Specifies that the channel's long-term average is to freeze in the
+          presence of either increasing or decreasing counts, thereby permit-
+          ting events to be reported in either direction.
+
+      azoteq,rx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        items:
+          minimum: 0
+          maximum: 7
+        description: Specifies the CRx pin(s) associated with the channel.
+
+      azoteq,samp-cap-double:
+        type: boolean
+        description: Doubles the sampling capacitance from 40 pF to 80 pF.
+
+      azoteq,vref-half:
+        type: boolean
+        description: Halves the discharge threshold from 1.0 V to 0.5 V.
+
+      azoteq,proj-bias:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the bias current applied during mutual (projected)
+          capacitive sensing as follows:
+          0: 2 uA
+          1: 5 uA
+          2: 7 uA
+          3: 10 uA
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 8
+        minimum: 0
+        maximum: 2040
+        description: Specifies the channel's ATI target.
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 16
+        minimum: 0
+        maximum: 496
+        description: Specifies the channel's ATI base.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4, 5]
+        description: |
+          Specifies the channel's ATI mode as follows:
+          0: Disabled
+          1: Compensation
+          2: Compensation divider
+          3: Fine fractional divider
+          4: Coarse fractional divider
+          5: Full
+
+      azoteq,ati-frac-div-fine:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI fine fractional divider.
+
+      azoteq,ati-frac-mult-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's ATI coarse fractional multiplier.
+
+      azoteq,ati-frac-div-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI coarse fractional divider.
+
+      azoteq,ati-comp-div:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI compensation divider.
+
+      azoteq,ati-comp-select:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1023
+        description: Specifies the channel's ATI compensation selection.
+
+      azoteq,debounce-enter:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's debounce entrance factor.
+
+      azoteq,debounce-exit:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's debounce exit factor.
+
+    patternProperties:
+      "^event-(prox|touch)$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a proximity or touch event reported by the channel.
+
+        properties:
+          azoteq,gpio-select:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 3
+            items:
+              minimum: 0
+              maximum: 2
+            description: |
+              Specifies one or more GPIO mapped to the event as follows:
+              0: GPIO0
+              1: GPIO3 (IQS7222C only)
+              2: GPIO4 (IQS7222C only)
+
+              Note that although multiple events can be mapped to a single
+              GPIO, they must all be of the same type (proximity, touch or
+              slider gesture).
+
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              Specifies the threshold for the event. Valid entries range from
+              0-127 and 0-255 for proximity and touch events, respectively.
+
+          azoteq,hyst:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            description:
+              Specifies the hysteresis for the event (touch events only).
+
+          azoteq,timeout-press-ms:
+            multipleOf: 500
+            minimum: 0
+            maximum: 127500
+            description:
+              Specifies the length of time (in ms) to wait before automatically
+              releasing a press event. Specify zero to allow the press state to
+              persist indefinitely.
+
+              The IQS7222B does not feature channel-specific timeouts; the time-
+              out specified for any one channel applies to all channels.
+
+          linux,code: true
+
+          linux,input-type:
+            enum: [1, 5]
+            default: 1
+            description:
+              Specifies whether the event is to be interpreted as a key (1)
+              or a switch (5).
+
+        required:
+          - linux,code
+
+        additionalProperties: false
+
+    dependencies:
+      azoteq,ref-weight: ["azoteq,ref-select"]
+      azoteq,use-prox: ["azoteq,ref-select"]
+
+    additionalProperties: false
+
+  "^slider-[0-1]$":
+    type: object
+    description: Represents a slider comprising three or four channels.
+
+    properties:
+      azoteq,channel-select:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 3
+        maxItems: 4
+        items:
+          minimum: 0
+          maximum: 9
+        description:
+          Specifies the order of the channels that participate in the slider.
+
+      azoteq,slider-size:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description:
+          Specifies the slider's one-dimensional resolution, equal to the
+          maximum coordinate plus one.
+
+      azoteq,lower-cal:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the slider's lower starting point.
+
+      azoteq,upper-cal:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the slider's upper starting point.
+
+      azoteq,top-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description:
+          Specifies the speed of movement after which coordinate filtering is
+          no longer applied.
+
+      azoteq,bottom-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description:
+          Specifies the speed of movement after which coordinate filtering is
+          linearly reduced.
+
+      azoteq,bottom-beta:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+        description:
+          Specifies the coordinate filter damping factor to be applied
+          while the speed of movement is below that which is specified
+          by azoteq,bottom-speed.
+
+      azoteq,static-beta:
+        type: boolean
+        description:
+          Applies the coordinate filter damping factor specified by
+          azoteq,bottom-beta regardless of the speed of movement.
+
+      azoteq,use-prox:
+        type: boolean
+        description:
+          Directs the slider to respond to the proximity states of the selected
+          channels instead of their corresponding touch states. Note the slider
+          cannot report granular coordinates during a state of proximity.
+
+      linux,axis:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Specifies the absolute axis to which coordinates are mapped. Specify
+          ABS_WHEEL to operate the slider as a wheel (IQS7222C only).
+
+    patternProperties:
+      "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a press or gesture (IQS7222A only) event reported by
+          the slider.
+
+        properties:
+          linux,code: true
+
+          azoteq,gesture-max-ms:
+            multipleOf: 4
+            minimum: 0
+            maximum: 1020
+            description:
+              Specifies the length of time (in ms) within which a tap, swipe
+              or flick gesture must be completed in order to be acknowledged
+              by the device. The number specified for any one swipe or flick
+              gesture applies to all remaining swipe or flick gestures.
+
+          azoteq,gesture-min-ms:
+            multipleOf: 4
+            minimum: 0
+            maximum: 124
+            description:
+              Specifies the length of time (in ms) for which a tap gesture must
+              be held in order to be acknowledged by the device.
+
+          azoteq,gesture-dist:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            multipleOf: 16
+            minimum: 0
+            maximum: 4080
+            description:
+              Specifies the distance across which a swipe or flick gesture must
+              travel in order to be acknowledged by the device. The number spec-
+              ified for any one swipe or flick gesture applies to all remaining
+              swipe or flick gestures.
+
+          azoteq,gpio-select:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 3
+            items:
+              minimum: 0
+              maximum: 2
+            description: |
+              Specifies one or more GPIO mapped to the event as follows:
+              0: GPIO0
+              1: GPIO3 (IQS7222C only)
+              2: GPIO4 (IQS7222C only)
+
+              Note that although multiple events can be mapped to a single
+              GPIO, they must all be of the same type (proximity, touch or
+              slider gesture).
+
+        required:
+          - linux,code
+
+        additionalProperties: false
+
+    required:
+      - azoteq,channel-select
+
+    additionalProperties: false
+
+  "^gpio-[0-2]$":
+    type: object
+    description: |
+      Represents a GPIO mapped to one or more events as follows:
+      gpio-0: GPIO0
+      gpio-1: GPIO3 (IQS7222C only)
+      gpio-2: GPIO4 (IQS7222C only)
+
+    allOf:
+      - $ref: ../pinctrl/pincfg-node.yaml#
+
+    properties:
+      drive-open-drain: true
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7222b
+
+    then:
+      patternProperties:
+        "^cycle-[0-9]$":
+          properties:
+            azoteq,iref-enable: false
+
+        "^channel-([0-9]|1[0-9])$":
+          properties:
+            azoteq,ref-select: false
+
+          patternProperties:
+            "^event-(prox|touch)$":
+              properties:
+                azoteq,gpio-select: false
+
+        "^slider-[0-1]$": false
+
+        "^gpio-[0-2]$": false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7222a
+
+    then:
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          patternProperties:
+            "^event-(prox|touch)$":
+              properties:
+                azoteq,gpio-select:
+                  maxItems: 1
+                  items:
+                    maximum: 0
+
+        "^slider-[0-1]$":
+          properties:
+            azoteq,slider-size:
+              multipleOf: 16
+              maximum: 4080
+
+            azoteq,top-speed:
+              multipleOf: 4
+              maximum: 1020
+
+          patternProperties:
+            "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+              properties:
+                azoteq,gpio-select:
+                  maxItems: 1
+                  items:
+                    maximum: 0
+
+    else:
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          properties:
+            azoteq,ulp-allow: false
+
+        "^slider-[0-1]$":
+          patternProperties:
+            "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+              properties:
+                azoteq,gesture-max-ms: false
+
+                azoteq,gesture-min-ms: false
+
+                azoteq,gesture-dist: false
+
+required:
+  - compatible
+  - reg
+  - irq-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/input.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs7222a@44 {
+                    compatible = "azoteq,iqs7222a";
+                    reg = <0x44>;
+                    irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+                    azoteq,lta-beta-lp = <7>;
+                    azoteq,lta-beta-np = <8>;
+                    azoteq,counts-beta-lp = <2>;
+                    azoteq,counts-beta-np = <3>;
+                    azoteq,lta-fast-beta-lp = <3>;
+                    azoteq,lta-fast-beta-np = <4>;
+
+                    cycle-0 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <1>, <2>, <4>, <5>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-1 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <5>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-2 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <4>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-3 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <2>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-4 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <1>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-5 {
+                            azoteq,conv-period = <2>;
+                            azoteq,conv-frac = <0>;
+                    };
+
+                    cycle-6 {
+                            azoteq,conv-period = <2>;
+                            azoteq,conv-frac = <0>;
+                    };
+
+                    channel-0 {
+                            azoteq,ulp-allow;
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <800>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-1 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-2 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-3 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-4 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-5 {
+                            azoteq,ulp-allow;
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <800>;
+                            azoteq,ati-base = <144>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-6 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_MUTE>;
+                            };
+                    };
+
+                    channel-7 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_VOLUMEDOWN>;
+                            };
+                    };
+
+                    channel-8 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_VOLUMEUP>;
+                            };
+                    };
+
+                    channel-9 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_POWER>;
+                            };
+                    };
+
+                    channel-10 {
+                            azoteq,ulp-allow;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <112>;
+
+                            event-touch {
+                                    linux,code = <SW_LID>;
+                                    linux,input-type = <EV_SW>;
+                            };
+                    };
+
+                    channel-11 {
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <112>;
+                    };
+
+                    slider-0 {
+                            azoteq,channel-select = <1>, <2>, <3>, <4>;
+                            azoteq,slider-size = <4080>;
+                            azoteq,upper-cal = <50>;
+                            azoteq,lower-cal = <30>;
+                            azoteq,top-speed = <200>;
+                            azoteq,bottom-speed = <1>;
+                            azoteq,bottom-beta = <3>;
+
+                            event-tap {
+                                    linux,code = <KEY_PLAYPAUSE>;
+                                    azoteq,gesture-max-ms = <600>;
+                                    azoteq,gesture-min-ms = <24>;
+                            };
+
+                            event-flick-pos {
+                                    linux,code = <KEY_NEXTSONG>;
+                                    azoteq,gesture-max-ms = <600>;
+                                    azoteq,gesture-dist = <816>;
+                            };
+
+                            event-flick-neg {
+                                    linux,code = <KEY_PREVIOUSSONG>;
+                            };
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/cap11xx.txt b/Documentation/devicetree/bindings/input/cap11xx.txt
deleted file mode 100644
index 8c67a0b5058d..000000000000
--- a/Documentation/devicetree/bindings/input/cap11xx.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device tree bindings for Microchip CAP11xx based capacitive touch sensors
-
-The node for this device must be a child of a I2C controller node, as the
-device communication via I2C only.
-
-Required properties:
-
-	compatible:		Must contain one of:
-					"microchip,cap1106"
-					"microchip,cap1126"
-					"microchip,cap1188"
-
-	reg:			The I2C slave address of the device.
-
-	interrupts:		Property describing the interrupt line the
-				device's ALERT#/CM_IRQ# pin is connected to.
-				The device only has one interrupt source.
-
-Optional properties:
-
-	autorepeat:		Enables the Linux input system's autorepeat
-				feature on the input device.
-
-	microchip,sensor-gain:	Defines the gain of the sensor circuitry. This
-				effectively controls the sensitivity, as a
-				smaller delta capacitance is required to
-				generate the same delta count values.
-				Valid values are 1, 2, 4, and 8.
-				By default, a gain of 1 is set.
-
-	microchip,irq-active-high:	By default the interrupt pin is active low
-				open drain. This property allows using the active
-				high push-pull output.
-
-	linux,keycodes:		Specifies an array of numeric keycode values to
-				be used for the channels. If this property is
-				omitted, KEY_A, KEY_B, etc are used as
-				defaults. The array must have exactly six
-				entries.
-
-Example:
-
-i2c_controller {
-	cap1106@28 {
-		compatible = "microchip,cap1106";
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 0>;
-		reg = <0x28>;
-		autorepeat;
-		microchip,sensor-gain = <2>;
-
-		linux,keycodes = <103>,		/* KEY_UP */
-				 <106>,		/* KEY_RIGHT */
-				 <108>,		/* KEY_DOWN */
-				 <105>,		/* KEY_LEFT */
-				 <109>,		/* KEY_PAGEDOWN */
-				 <104>;		/* KEY_PAGEUP */
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usr@0 {
-			label = "cap11xx:green:usr0";
-			reg = <0>;
-		};
-
-		usr@1 {
-			label = "cap11xx:green:usr1";
-			reg = <1>;
-		};
-
-		alive@2 {
-			label = "cap11xx:green:alive";
-			reg = <2>;
-			linux,default_trigger = "heartbeat";
-		};
-	};
-}
diff --git a/Documentation/devicetree/bindings/input/cros-ec-keyb.txt b/Documentation/devicetree/bindings/input/cros-ec-keyb.txt
deleted file mode 100644
index 0f6355ce39b5..000000000000
--- a/Documentation/devicetree/bindings/input/cros-ec-keyb.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-ChromeOS EC Keyboard
-
-Google's ChromeOS EC Keyboard is a simple matrix keyboard implemented on
-a separate EC (Embedded Controller) device. It provides a message for reading
-key scans from the EC. These are then converted into keycodes for processing
-by the kernel.
-
-This binding is based on matrix-keymap.txt and extends/modifies it as follows:
-
-Required properties:
-- compatible: "google,cros-ec-keyb"
-
-Optional properties:
-- google,needs-ghost-filter: True to enable a ghost filter for the matrix
-keyboard. This is recommended if the EC does not have its own logic or
-hardware for this.
-
-
-Example:
-
-cros-ec-keyb {
-	compatible = "google,cros-ec-keyb";
-	keypad,num-rows = <8>;
-	keypad,num-columns = <13>;
-	google,needs-ghost-filter;
-	/*
-	 * Keymap entries take the form of 0xRRCCKKKK where
-	 * RR=Row CC=Column KKKK=Key Code
-	 * The values below are for a US keyboard layout and
-	 * are taken from the Linux driver. Note that the
-	 * 102ND key is not used for US keyboards.
-	 */
-	linux,keymap = <
-		/* CAPSLCK F1         B          F10     */
-		0x0001003a 0x0002003b 0x00030030 0x00040044
-		/* N       =          R_ALT      ESC     */
-		0x00060031 0x0008000d 0x000a0064 0x01010001
-		/* F4      G          F7         H       */
-		0x0102003e 0x01030022 0x01040041 0x01060023
-		/* '       F9         BKSPACE    L_CTRL  */
-		0x01080028 0x01090043 0x010b000e 0x0200001d
-		/* TAB     F3         T          F6      */
-		0x0201000f 0x0202003d 0x02030014 0x02040040
-		/* ]       Y          102ND      [       */
-		0x0205001b 0x02060015 0x02070056 0x0208001a
-		/* F8      GRAVE      F2         5       */
-		0x02090042 0x03010029 0x0302003c 0x03030006
-		/* F5      6          -          \       */
-		0x0304003f 0x03060007 0x0308000c 0x030b002b
-		/* R_CTRL  A          D          F       */
-		0x04000061 0x0401001e 0x04020020 0x04030021
-		/* S       K          J          ;       */
-		0x0404001f 0x04050025 0x04060024 0x04080027
-		/* L       ENTER      Z          C       */
-		0x04090026 0x040b001c 0x0501002c 0x0502002e
-		/* V       X          ,          M       */
-		0x0503002f 0x0504002d 0x05050033 0x05060032
-		/* L_SHIFT /          .          SPACE   */
-		0x0507002a 0x05080035 0x05090034 0x050B0039
-		/* 1       3          4          2       */
-		0x06010002 0x06020004 0x06030005 0x06040003
-		/* 8       7          0          9       */
-		0x06050009 0x06060008 0x0608000b 0x0609000a
-		/* L_ALT   DOWN       RIGHT      Q       */
-		0x060a0038 0x060b006c 0x060c006a 0x07010010
-		/* E       R          W          I       */
-		0x07020012 0x07030013 0x07040011 0x07050017
-		/* U       R_SHIFT    P          O       */
-		0x07060016 0x07070036 0x07080019 0x07090018
-		/* UP      LEFT    */
-		0x070b0067 0x070c0069>;
-};
diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
deleted file mode 100644
index ef2ae729718f..000000000000
--- a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Samsung tm2-touchkey
-
-Required properties:
-- compatible:
-    * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board
-    * "cypress,midas-touchkey" - for the touchkey found on midas boards
-    * "cypress,aries-touchkey" - for the touchkey found on aries boards
-- reg: I2C address of the chip.
-- interrupts: interrupt to which the chip is connected (see interrupt
-	binding[0]).
-- vcc-supply : internal regulator output. 1.8V
-- vdd-supply : power supply for IC 3.3V
-
-Optional properties:
-- linux,keycodes: array of keycodes (max 4), default KEY_PHONE and KEY_BACK
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Example:
-	&i2c0 {
-		/* ... */
-
-		touchkey@20 {
-			compatible = "cypress,tm2-touchkey";
-			reg = <0x20>;
-			interrupt-parent = <&gpa3>;
-			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-			vcc-supply=<&ldo32_reg>;
-			vdd-supply=<&ldo33_reg>;
-			linux,keycodes = <KEY_PHONE KEY_BACK>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.yaml b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.yaml
new file mode 100644
index 000000000000..52dca8b64081
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress,tm2-touchkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung TM2 touch key controller
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  Touch key controllers similar to the TM2 can be found in a wide range of
+  Samsung devices. They are implemented using many different MCUs, but use
+  a similar I2C protocol.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cypress,tm2-touchkey
+      - cypress,midas-touchkey
+      - cypress,aries-touchkey
+      - coreriver,tc360-touchkey
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Optional regulator for LED voltage, 3.3V.
+
+  vcc-supply:
+    description: Optional regulator for MCU, 1.8V-3.3V (depending on MCU).
+
+  vddio-supply:
+    description: |
+      Optional regulator that provides digital I/O voltage,
+      e.g. for pulling up the interrupt line or the I2C pins.
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchkey@20 {
+            compatible = "cypress,tm2-touchkey";
+            reg = <0x20>;
+            interrupt-parent = <&gpa3>;
+            interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+            vcc-supply = <&ldo32_reg>;
+            vdd-supply = <&ldo33_reg>;
+            linux,keycodes = <KEY_MENU KEY_BACK>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/cypress-sf.yaml b/Documentation/devicetree/bindings/input/cypress-sf.yaml
new file mode 100644
index 000000000000..c0b051466272
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress-sf.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress-sf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress StreetFighter touchkey controller
+
+maintainers:
+  - Yassine Oudjana <y.oudjana@protonmail.com>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: cypress,sf3155
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  avdd-supply:
+    description: Regulator for AVDD analog voltage
+
+  vdd-supply:
+    description: Regulator for VDD digital voltage
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchkey@28 {
+                compatible = "cypress,sf3155";
+                reg = <0x28>;
+                interrupt-parent = <&msmgpio>;
+                interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+                avdd-supply = <&vreg_l6a_1p8>;
+                vdd-supply = <&vdd_3v2_tp>;
+                linux,keycodes = <KEY_BACK KEY_MENU>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/da9062-onkey.txt b/Documentation/devicetree/bindings/input/da9062-onkey.txt
index 5f9fbc68e58a..e5eef59a93dc 100644
--- a/Documentation/devicetree/bindings/input/da9062-onkey.txt
+++ b/Documentation/devicetree/bindings/input/da9062-onkey.txt
@@ -2,7 +2,7 @@
 
 This module is part of the DA9061/DA9062/DA9063. For more details about entire
 DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
-For DA9063 see Documentation/devicetree/bindings/mfd/da9063.txt
+For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
 
 This module provides the KEY_POWER event.
 
diff --git a/Documentation/devicetree/bindings/input/dlg,da7280.txt b/Documentation/devicetree/bindings/input/dlg,da7280.txt
new file mode 100644
index 000000000000..96ee5d50e111
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/dlg,da7280.txt
@@ -0,0 +1,108 @@
+Dialog Semiconductor DA7280 Haptics bindings
+
+Required properties:
+- compatible: Should be "dlg,da7280".
+- reg: Specifies the I2C slave address.
+
+- interrupt-parent : Specifies the phandle of the interrupt controller to
+  which the IRQs from DA7280 are delivered to.
+
+- dlg,actuator-type: Set Actuator type. it should be one of:
+  "LRA" - Linear Resonance Actuator type.
+  "ERM-bar" - Bar type Eccentric Rotating Mass.
+  "ERM-coin" - Coin type Eccentric Rotating Mass.
+
+- dlg,const-op-mode: Haptic operation mode for FF_CONSTANT.
+  Possible values:
+	1 - Direct register override(DRO) mode triggered by i2c(default),
+	2 - PWM data source mode controlled by PWM duty,
+- dlg,periodic-op-mode: Haptic operation mode for FF_PERIODIC.
+  Possible values:
+	1 - Register triggered waveform memory(RTWM) mode, the pattern
+	    assigned to the PS_SEQ_ID played as much times as PS_SEQ_LOOP,
+	2 - Edge triggered waveform memory(ETWM) mode, external GPI(N)
+	    control are required to enable/disable and it needs to keep
+	    device enabled by sending magnitude (X > 0),
+	    the pattern is assigned to the GPI(N)_SEQUENCE_ID below.
+	The default value is 1 for both of the operation modes.
+	For more details, please see the datasheet.
+
+- dlg,nom-microvolt: Nominal actuator voltage rating.
+  Valid values: 0 - 6000000.
+- dlg,abs-max-microvolt: Absolute actuator maximum voltage rating.
+  Valid values: 0 - 6000000.
+- dlg,imax-microamp: Actuator max current rating.
+  Valid values: 0 - 252000.
+  Default: 130000.
+- dlg,impd-micro-ohms: the impedance of the actuator in micro ohms.
+  Valid values: 0 - 1500000000.
+
+Optional properties:
+- pwms : phandle to the physical PWM(Pulse Width Modulation) device.
+  PWM properties should be named "pwms". And number of cell is different
+  for each pwm device.
+  (See Documentation/devicetree/bindings/pwm/pwm.txt
+   for further information relating to pwm properties)
+
+- dlg,ps-seq-id: the PS_SEQ_ID(pattern ID in waveform memory inside chip)
+  to play back when RTWM-MODE is enabled.
+  Valid range: 0 - 15.
+- dlg,ps-seq-loop: the PS_SEQ_LOOP, Number of times the pre-stored sequence
+  pointed to by PS_SEQ_ID or GPI(N)_SEQUENCE_ID is repeated.
+  Valid range: 0 - 15.
+- dlg,gpiN-seq-id: the GPI(N)_SEQUENCE_ID, pattern to play
+  when gpi0 is triggered, 'N' must be 0 - 2.
+  Valid range: 0 - 15.
+- dlg,gpiN-mode: the pattern mode which can select either
+  "Single-pattern" or "Multi-pattern", 'N' must be 0 - 2.
+- dlg,gpiN-polarity: gpiN polarity which can be chosen among
+  "Rising-edge", "Falling-edge" and "Both-edge",
+  'N' must be 0 - 2
+  Haptic will work by this edge option in case of ETWM mode.
+
+- dlg,resonant-freq-hz: use in case of LRA.
+  the frequency range: 50 - 300.
+  Default: 205.
+
+- dlg,bemf-sens-enable: Enable for internal loop computations.
+- dlg,freq-track-enable: Enable for resonant frequency tracking.
+- dlg,acc-enable: Enable for active acceleration.
+- dlg,rapid-stop-enable: Enable for rapid stop.
+- dlg,amp-pid-enable: Enable for the amplitude PID.
+- dlg,mem-array: Customized waveform memory(patterns) data downloaded to
+  the device during initialization. This is an array of 100 values(u8).
+
+For further information, see device datasheet.
+
+======
+
+Example:
+
+	haptics: da7280-haptics@4a {
+		compatible = "dlg,da7280";
+		reg = <0x4a>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		dlg,actuator-type = "LRA";
+		dlg,dlg,const-op-mode = <1>;
+		dlg,dlg,periodic-op-mode = <1>;
+		dlg,nom-microvolt = <2000000>;
+		dlg,abs-max-microvolt = <2000000>;
+		dlg,imax-microamp = <170000>;
+		dlg,resonant-freq-hz = <180>;
+		dlg,impd-micro-ohms = <10500000>;
+		dlg,freq-track-enable;
+		dlg,rapid-stop-enable;
+		dlg,mem-array = <
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		>;
+	};
diff --git a/Documentation/devicetree/bindings/input/elan,ekth3000.yaml b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml
new file mode 100644
index 000000000000..2a9bb6ace021
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/elan,ekth3000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elantech I2C Touchpad
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    const: elan,ekth3000
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: touchpad can be used as a wakeup source
+
+  vcc-supply:
+    description: a phandle for the regulator supplying 3.3V power
+
+  elan,trackpoint:
+    type: boolean
+    description: touchpad can support a trackpoint
+
+  elan,clickpad:
+    type: boolean
+    description: touchpad is a clickpad (the entire surface is a button)
+
+  elan,middle-button:
+    type: boolean
+    description: touchpad has a physical middle button
+
+  elan,x_traces:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: number of antennas on the x axis
+
+  elan,y_traces:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: number of antennas on the y axis
+
+  touchscreen-size-x: true
+
+  touchscreen-size-y: true
+
+  touchscreen-x-mm: true
+
+  touchscreen-y-mm: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchpad@15 {
+            compatible = "elan,ekth3000";
+            reg = <0x15>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
new file mode 100644
index 000000000000..05e6f2df604c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/elan,ekth6915.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elan eKTH6915 touchscreen controller
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description:
+  Supports the Elan eKTH6915 touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+properties:
+  compatible:
+    items:
+      - const: elan,ekth6915
+
+  reg:
+    const: 0x10
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
+
+  vcc33-supply:
+    description: The 3.3V supply to the touchscreen.
+
+  vccio-supply:
+    description:
+      The IO supply to the touchscreen. Need not be specified if this is the
+      same as the 3.3V supply.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ap_ts: touchscreen@10 {
+        compatible = "elan,ekth6915";
+        reg = <0x10>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vcc33-supply = <&pp3300_ts>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/elan_i2c.txt b/Documentation/devicetree/bindings/input/elan_i2c.txt
deleted file mode 100644
index 9963247706f2..000000000000
--- a/Documentation/devicetree/bindings/input/elan_i2c.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Elantech I2C Touchpad
-
-Required properties:
-- compatible: must be "elan,ekth3000".
-- reg: I2C address of the chip.
-- interrupts: interrupt to which the chip is connected (see interrupt
-  binding[0]).
-
-Optional properties:
-- wakeup-source: touchpad can be used as a wakeup source.
-- pinctrl-names: should be "default" (see pinctrl binding [1]).
-- pinctrl-0: a phandle pointing to the pin settings for the device (see
-  pinctrl binding [1]).
-- vcc-supply: a phandle for the regulator supplying 3.3V power.
-- elan,trackpoint: touchpad can support a trackpoint (boolean)
-- elan,clickpad: touchpad is a clickpad (the entire surface is a button)
-- elan,middle-button: touchpad has a physical middle button
-- elan,x_traces: number of antennas on the x axis
-- elan,y_traces: number of antennas on the y axis
-- some generic touchscreen properties [2]:
-  * touchscreen-size-x
-  * touchscreen-size-y
-  * touchscreen-x-mm
-  * touchscreen-y-mm
-
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
-
-Example:
-	&i2c1 {
-		/* ... */
-
-		touchpad@15 {
-			compatible = "elan,ekth3000";
-			reg = <0x15>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/elants_i2c.txt b/Documentation/devicetree/bindings/input/elants_i2c.txt
deleted file mode 100644
index 5edac8be0802..000000000000
--- a/Documentation/devicetree/bindings/input/elants_i2c.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Elantech I2C Touchscreen
-
-Required properties:
-- compatible: must be "elan,ekth3500".
-- reg: I2C address of the chip.
-- interrupts: interrupt to which the chip is connected (see interrupt
-  binding[0]).
-
-Optional properties:
-- wakeup-source: touchscreen can be used as a wakeup source.
-- pinctrl-names: should be "default" (see pinctrl binding [1]).
-- pinctrl-0: a phandle pointing to the pin settings for the device (see
-  pinctrl binding [1]).
-- reset-gpios: reset gpio the chip is connected to.
-- vcc33-supply: a phandle for the regulator supplying 3.3V power.
-- vccio-supply: a phandle for the regulator supplying IO power.
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Example:
-	&i2c1 {
-		/* ... */
-
-		touchscreen@10 {
-			compatible = "elan,ekth3500";
-			reg = <0x10>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
index 5b37be0be4e9..5139af287d3e 100644
--- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
+++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
@@ -31,8 +31,7 @@ properties:
   interrupts:
     maxItems: 1
 
-  vdd-supply:
-    maxItems: 1
+  vdd-supply: true
 
   linux,keycodes:
     minItems: 1
@@ -48,6 +47,8 @@ required:
   - vdd-supply
   - linux,keycodes
 
+unevaluatedProperties: false
+
 examples:
   - |
     // Example with interrupts
@@ -56,7 +57,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        mpr121@5a {
+        touchkey@5a {
             compatible = "fsl,mpr121-touchkey";
             reg = <0x5a>;
             interrupt-parent = <&gpio1>;
@@ -76,7 +77,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        mpr121@5a {
+        touchkey@5a {
             compatible = "fsl,mpr121-touchkey";
             reg = <0x5a>;
             poll-interval = <20>;
diff --git a/Documentation/devicetree/bindings/input/fsl,scu-key.yaml b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
new file mode 100644
index 000000000000..e6266d188266
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/fsl,scu-key.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - SCU key bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8qxp-sc-key
+      - const: fsl,imx-sc-key
+
+  linux,keycodes:
+    maxItems: 1
+
+required:
+  - compatible
+  - linux,keycodes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+
+    keys {
+        compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+        linux,keycodes = <KEY_POWER>;
+    };
diff --git a/Documentation/devicetree/bindings/input/fsl-mma8450.txt b/Documentation/devicetree/bindings/input/fsl-mma8450.txt
deleted file mode 100644
index 0b96e5737d3a..000000000000
--- a/Documentation/devicetree/bindings/input/fsl-mma8450.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-* Freescale MMA8450 3-Axis Accelerometer
-
-Required properties:
-- compatible : "fsl,mma8450".
-- reg: the I2C address of MMA8450
-
-Example:
-
-accelerometer: mma8450@1c {
-	compatible = "fsl,mma8450";
-	reg = <0x1c>;
-};
diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
new file mode 100644
index 000000000000..fe1c5016f7f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/goodix,gt7375p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix GT7375P touchscreen
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description:
+  Supports the Goodix GT7375P touchscreen.
+  This touchscreen uses the i2c-hid protocol but has some non-standard
+  power sequencing required.
+
+properties:
+  compatible:
+    items:
+      - const: goodix,gt7375p
+
+  reg:
+    enum:
+      - 0x5d
+      - 0x14
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    true
+
+  vdd-supply:
+    description: The 3.3V supply to the touchscreen.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ap_ts: touchscreen@5d {
+        compatible = "goodix,gt7375p";
+        reg = <0x5d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vdd-supply = <&pp3300_ts>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
new file mode 100644
index 000000000000..e05690b3e963
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/input/google,cros-ec-keyb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC Keyboard
+
+maintainers:
+  - Simon Glass <sjg@chromium.org>
+  - Benson Leung <bleung@chromium.org>
+
+description: |
+  Google's ChromeOS EC Keyboard is a simple matrix keyboard
+  implemented on a separate EC (Embedded Controller) device. It provides
+  a message for reading key scans from the EC. These are then converted
+  into keycodes for processing by the kernel. This device also supports
+  switches/buttons like power and volume buttons.
+
+properties:
+  compatible:
+    oneOf:
+      - description: ChromeOS EC with only buttons/switches
+        const: google,cros-ec-keyb-switches
+      - description: ChromeOS EC with keyboard and possibly buttons/switches
+        const: google,cros-ec-keyb
+
+  google,needs-ghost-filter:
+    description:
+      Enable a ghost filter for the matrix keyboard. This is recommended
+      if the EC does not have its own logic or hardware for this.
+    type: boolean
+
+  function-row-physmap:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 15
+    description: |
+      An ordered u32 array describing the rows/columns (in the scan matrix)
+      of top row keys from physical left (KEY_F1) to right. Each entry
+      encodes the row/column as:
+      (((row) & 0xFF) << 24) | (((column) & 0xFF) << 16)
+      where the lower 16 bits are reserved. This property is specified only
+      when the keyboard has a custom design for the top row keys.
+
+dependencies:
+  function-row-phsymap: [ 'linux,keymap' ]
+  google,needs-ghost-filter: [ 'linux,keymap' ]
+
+required:
+  - compatible
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: google,cros-ec-keyb
+then:
+  $ref: "/schemas/input/matrix-keymap.yaml#"
+  required:
+    - keypad,num-rows
+    - keypad,num-columns
+    - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    keyboard-controller {
+        compatible = "google,cros-ec-keyb";
+        keypad,num-rows = <8>;
+        keypad,num-columns = <13>;
+        google,needs-ghost-filter;
+        function-row-physmap = <
+            MATRIX_KEY(0x00, 0x02, 0)   /* T1 */
+            MATRIX_KEY(0x03, 0x02, 0)   /* T2 */
+            MATRIX_KEY(0x02, 0x02, 0)   /* T3 */
+            MATRIX_KEY(0x01, 0x02, 0)   /* T4 */
+            MATRIX_KEY(0x03, 0x04, 0)   /* T5 */
+            MATRIX_KEY(0x02, 0x04, 0)   /* T6 */
+            MATRIX_KEY(0x01, 0x04, 0)   /* T7 */
+            MATRIX_KEY(0x02, 0x09, 0)   /* T8 */
+            MATRIX_KEY(0x01, 0x09, 0)   /* T9 */
+            MATRIX_KEY(0x00, 0x04, 0)   /* T10 */
+        >;
+        /*
+         * Keymap entries take the form of 0xRRCCKKKK where
+         * RR=Row CC=Column KKKK=Key Code
+         * The values below are for a US keyboard layout and
+         * are taken from the Linux driver. Note that the
+         * 102ND key is not used for US keyboards.
+         */
+        linux,keymap = <
+            /* CAPSLCK F1         B          F10     */
+            0x0001003a 0x0002003b 0x00030030 0x00040044
+            /* N       =          R_ALT      ESC     */
+            0x00060031 0x0008000d 0x000a0064 0x01010001
+            /* F4      G          F7         H       */
+            0x0102003e 0x01030022 0x01040041 0x01060023
+            /* '       F9         BKSPACE    L_CTRL  */
+            0x01080028 0x01090043 0x010b000e 0x0200001d
+            /* TAB     F3         T          F6      */
+            0x0201000f 0x0202003d 0x02030014 0x02040040
+            /* ]       Y          102ND      [       */
+            0x0205001b 0x02060015 0x02070056 0x0208001a
+            /* F8      GRAVE      F2         5       */
+            0x02090042 0x03010029 0x0302003c 0x03030006
+            /* F5      6          -          \       */
+            0x0304003f 0x03060007 0x0308000c 0x030b002b
+            /* R_CTRL  A          D          F       */
+            0x04000061 0x0401001e 0x04020020 0x04030021
+            /* S       K          J          ;       */
+            0x0404001f 0x04050025 0x04060024 0x04080027
+            /* L       ENTER      Z          C       */
+            0x04090026 0x040b001c 0x0501002c 0x0502002e
+            /* V       X          ,          M       */
+            0x0503002f 0x0504002d 0x05050033 0x05060032
+            /* L_SHIFT /          .          SPACE   */
+            0x0507002a 0x05080035 0x05090034 0x050B0039
+            /* 1       3          4          2       */
+            0x06010002 0x06020004 0x06030005 0x06040003
+            /* 8       7          0          9       */
+            0x06050009 0x06060008 0x0608000b 0x0609000a
+            /* L_ALT   DOWN       RIGHT      Q       */
+            0x060a0038 0x060b006c 0x060c006a 0x07010010
+            /* E       R          W          I       */
+            0x07020012 0x07030013 0x07040011 0x07050017
+            /* U       R_SHIFT    P          O       */
+            0x07060016 0x07070036 0x07080019 0x07090018
+            /* UP      LEFT    */
+            0x070b0067 0x070c0069>;
+    };
+  - |
+    /* No matrix keyboard, just buttons/switches */
+    keyboard-controller {
+        compatible = "google,cros-ec-keyb-switches";
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
deleted file mode 100644
index 4d9a3717eaaf..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Device-Tree bindings for input/gpio_keys_polled.c keyboard driver
-
-Required properties:
-	- compatible = "gpio-keys-polled";
-	- poll-interval: Poll interval time in milliseconds
-
-Optional properties:
-	- autorepeat: Boolean, Enable auto repeat feature of Linux input
-	  subsystem.
-
-Each button (key) is represented as a sub-node of "gpio-keys-polled":
-Subnode properties:
-
-	- gpios: OF device-tree gpio specification.
-	- label: Descriptive name of the key.
-	- linux,code: Key / Axis code to emit.
-
-Optional subnode-properties:
-	- linux,input-type: Specify event type this button/key generates.
-	  If not specified defaults to <1> == EV_KEY.
-	- linux,input-value: If linux,input-type is EV_ABS or EV_REL then this
-	  value is sent for events this button generates when pressed.
-	  EV_ABS/EV_REL axis will generate an event with a value of 0 when
-	  all buttons with linux,input-type == type and linux,code == axis
-	  are released. This value is interpreted as a signed 32 bit value,
-	  e.g. to make a button generate a value of -1 use:
-	  linux,input-value = <0xffffffff>; /* -1 */
-	- debounce-interval: Debouncing interval time in milliseconds.
-	  If not specified defaults to 5.
-	- wakeup-source: Boolean, button can wake-up the system.
-			 (Legacy property supported: "gpio-key,wakeup")
-
-Example nodes:
-
-	gpio_keys_polled {
-			compatible = "gpio-keys-polled";
-			poll-interval = <100>;
-			autorepeat;
-
-			button21 {
-				label = "GPIO Key UP";
-				linux,code = <103>;
-				gpios = <&gpio1 0 1>;
-			};
-			...
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
deleted file mode 100644
index 7cccc49b6bea..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Device-Tree bindings for input/keyboard/gpio_keys.c keyboard driver
-
-Required properties:
-	- compatible = "gpio-keys";
-
-Optional properties:
-	- autorepeat: Boolean, Enable auto repeat feature of Linux input
-	  subsystem.
-	- label: String, name of the input device.
-
-Each button (key) is represented as a sub-node of "gpio-keys":
-Subnode properties:
-
-	- gpios: OF device-tree gpio specification.
-	- interrupts: the interrupt line for that input.
-	- label: Descriptive name of the key.
-	- linux,code: Keycode to emit.
-
-Note that either "interrupts" or "gpios" properties can be omitted, but not
-both at the same time. Specifying both properties is allowed.
-
-Optional subnode-properties:
-	- linux,input-type: Specify event type this button/key generates.
-	  If not specified defaults to <1> == EV_KEY.
-	- debounce-interval: Debouncing interval time in milliseconds.
-	  If not specified defaults to 5.
-	- wakeup-source: Boolean, button can wake-up the system.
-			 (Legacy property supported: "gpio-key,wakeup")
-	- wakeup-event-action: Specifies whether the key should wake the
-	  system when asserted, when deasserted, or both. This property is
-	  only valid for keys that wake up the system (e.g., when the
-	  "wakeup-source" property is also provided).
-	  Supported values are defined in linux-event-codes.h:
-		EV_ACT_ASSERTED		- asserted
-		EV_ACT_DEASSERTED	- deasserted
-		EV_ACT_ANY		- both asserted and deasserted
-	- linux,can-disable: Boolean, indicates that button is connected
-	  to dedicated (not shared) interrupt which can be disabled to
-	  suppress events from the button.
-
-Example nodes:
-
-	gpio-keys {
-			compatible = "gpio-keys";
-			autorepeat;
-
-			up {
-				label = "GPIO Key UP";
-				linux,code = <103>;
-				gpios = <&gpio1 0 1>;
-			};
-
-			down {
-				label = "GPIO Key DOWN";
-				linux,code = <108>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-			};
-			...
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
new file mode 100644
index 000000000000..17ac9dff7972
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device-Tree bindings for GPIO attached keys
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - gpio-keys
+      - gpio-keys-polled
+
+  autorepeat: true
+
+  label:
+    description: Name of entire device
+
+  poll-interval: true
+
+patternProperties:
+  "^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$":
+    $ref: input.yaml#
+
+    properties:
+      gpios:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      label:
+        description: Descriptive name of the key.
+
+      linux,code:
+        description: Key / Axis code to emit.
+
+      linux,input-type:
+        default: 1  # EV_KEY
+
+      linux,input-value:
+        description: |
+          If linux,input-type is EV_ABS or EV_REL then this
+          value is sent for events this button generates when pressed.
+          EV_ABS/EV_REL axis will generate an event with a value of 0
+          when all buttons with linux,input-type == type and
+          linux,code == axis are released. This value is interpreted
+          as a signed 32 bit value, e.g. to make a button generate a
+          value of -1 use:
+
+          linux,input-value = <0xffffffff>; /* -1 */
+
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      debounce-interval:
+        description:
+          Debouncing interval time in milliseconds. If not specified defaults to 5.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+        default: 5
+
+      wakeup-source:
+        description: Button can wake-up the system.
+
+      wakeup-event-action:
+        description: |
+          Specifies whether the key should wake the system when asserted, when
+          deasserted, or both. This property is only valid for keys that wake up the
+          system (e.g., when the "wakeup-source" property is also provided).
+
+          Supported values are defined in linux-event-codes.h:
+
+            EV_ACT_ANY        - both asserted and deasserted
+            EV_ACT_ASSERTED   - asserted
+            EV_ACT_DEASSERTED - deasserted
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+
+      linux,can-disable:
+        description:
+          Indicates that button is connected to dedicated (not shared) interrupt
+          which can be disabled to suppress events from the button.
+        type: boolean
+
+    required:
+      - linux,code
+
+    anyOf:
+      - required:
+          - interrupts
+      - required:
+          - interrupts-extended
+      - required:
+          - gpios
+
+    dependencies:
+      wakeup-event-action: [ wakeup-source ]
+      linux,input-value: [ gpios ]
+
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: input.yaml#
+  - if:
+      properties:
+        compatible:
+          const: gpio-keys-polled
+    then:
+      required:
+        - poll-interval
+    else:
+      properties:
+        poll-interval: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio-keys {
+        compatible = "gpio-keys";
+        autorepeat;
+
+        key-up {
+            label = "GPIO Key UP";
+            linux,code = <103>;
+            gpios = <&gpio1 0 1>;
+        };
+
+        key-down {
+            label = "GPIO Key DOWN";
+            linux,code = <108>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
index b98bf9363c8f..2384465eaa19 100644
--- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
@@ -26,6 +26,8 @@ required:
   - compatible
   - enable-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
deleted file mode 100644
index c76bafaf98d2..000000000000
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* HID over I2C Device-Tree bindings
-
-HID over I2C provides support for various Human Interface Devices over the
-I2C bus. These devices can be for example touchpads, keyboards, touch screens
-or sensors.
-
-The specification has been written by Microsoft and is currently available here:
-http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
-
-If this binding is used, the kernel module i2c-hid will handle the communication
-with the device and the generic hid core layer will handle the protocol.
-
-Required properties:
-- compatible: must be "hid-over-i2c"
-- reg: i2c slave address
-- hid-descr-addr: HID descriptor address
-- interrupts: interrupt line
-
-Additional optional properties:
-
-Some devices may support additional optional properties to help with, e.g.,
-power sequencing. The following properties can be supported by one or more
-device-specific compatible properties, which should be used in addition to the
-"hid-over-i2c" string.
-
-- compatible:
-  * "wacom,w9013" (Wacom W9013 digitizer). Supports:
-    - vdd-supply (3.3V)
-    - vddl-supply (1.8V)
-    - post-power-on-delay-ms
-
-- vdd-supply: phandle of the regulator that provides the supply voltage.
-- post-power-on-delay-ms: time required by the device after enabling its regulators
-  or powering it on, before it is ready for communication.
-
-Example:
-
-	i2c-hid-dev@2c {
-		compatible = "hid-over-i2c";
-		reg = <0x2c>;
-		hid-descr-addr = <0x0020>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <3 2>;
-	};
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
new file mode 100644
index 000000000000..7156b08f7645
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/hid-over-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HID over I2C Devices
+
+maintainers:
+  - Benjamin Tissoires <benjamin.tissoires@redhat.com>
+  - Jiri Kosina <jkosina@suse.cz>
+
+description: |+
+  HID over I2C provides support for various Human Interface Devices over the
+  I2C bus. These devices can be for example touchpads, keyboards, touch screens
+  or sensors.
+
+  The specification has been written by Microsoft and is currently available here:
+  https://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
+
+  If this binding is used, the kernel module i2c-hid will handle the communication
+  with the device and the generic hid core layer will handle the protocol.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - wacom,w9013
+          - const: hid-over-i2c
+      - description: Just "hid-over-i2c" alone is allowed, but not recommended.
+        const: hid-over-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  hid-descr-addr:
+    description: HID descriptor address
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  post-power-on-delay-ms:
+    description: Time required by the device after enabling its regulators
+      or powering it on, before it is ready for communication.
+
+  touchscreen-inverted-x: true
+
+  touchscreen-inverted-y: true
+
+  vdd-supply:
+    description: 3.3V supply
+
+  vddl-supply:
+    description: 1.8V supply
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hid@2c {
+            compatible = "hid-over-i2c";
+            reg = <0x2c>;
+            hid-descr-addr = <0x0020>;
+            interrupts = <3 2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/ibm,op-panel.yaml b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
new file mode 100644
index 000000000000..29a1879e356d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ibm,op-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM Operation Panel
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  The IBM Operation Panel provides a simple interface to control the connected
+  server. It has a display and three buttons: two directional arrows and one
+  'Enter' button.
+
+properties:
+  compatible:
+    const: ibm,op-panel
+
+  reg:
+    maxItems: 1
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/i2c/i2c.h>
+    #include <dt-bindings/input/input.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ibm-op-panel@62 {
+            compatible = "ibm,op-panel";
+            reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+            linux,keycodes = <KEY_UP>, <KEY_DOWN>, <KEY_ENTER>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
deleted file mode 100644
index cdcaa3f52d25..000000000000
--- a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller
-
-Required properties:
-- compatible:
-    ilitek,ili210x for ILI210x
-    ilitek,ili2117 for ILI2117
-    ilitek,ili2120 for ILI2120
-    ilitek,ili251x for ILI251x
-
-- reg: The I2C address of the device
-
-- interrupts: The sink for the touchscreen's IRQ output
-    See ../interrupt-controller/interrupts.txt
-
-Optional properties for main touchpad device:
-
-- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
-
-Example:
-
-	touchscreen@41 {
-		compatible = "ilitek,ili251x";
-		reg = <0x41>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/input/imx-keypad.txt b/Documentation/devicetree/bindings/input/imx-keypad.txt
deleted file mode 100644
index 2ebaf7d26843..000000000000
--- a/Documentation/devicetree/bindings/input/imx-keypad.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale i.MX Keypad Port(KPP) device tree bindings
-
-The KPP is designed to interface with a keypad matrix with 2-point contact
-or 3-point contact keys. The KPP is designed to simplify the software task
-of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
-and decoding one or multiple keys pressed simultaneously on a keypad.
-
-Required SoC Specific Properties:
-- compatible: Should be "fsl,<soc>-kpp".
-
-- reg: Physical base address of the KPP and length of memory mapped
-  region.
-
-- interrupts: The KPP interrupt number to the CPU(s).
-
-- clocks: The clock provided by the SoC to the KPP. Some SoCs use dummy
-clock(The clock for the KPP is provided by the SoCs automatically).
-
-Required Board Specific Properties:
-- pinctrl-names: The definition can be found at
-pinctrl/pinctrl-bindings.txt.
-
-- pinctrl-0: The definition can be found at
-pinctrl/pinctrl-bindings.txt.
-
-- linux,keymap: The definition can be found at
-bindings/input/matrix-keymap.txt.
-
-Example:
-kpp: kpp@73f94000 {
-	compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
-	reg = <0x73f94000 0x4000>;
-	interrupts = <60>;
-	clocks = <&clks 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp_1>;
-	linux,keymap = <0x00000067	/* KEY_UP */
-			0x0001006c	/* KEY_DOWN */
-			0x00020072	/* KEY_VOLUMEDOWN */
-			0x00030066	/* KEY_HOME */
-			0x0100006a	/* KEY_RIGHT */
-			0x01010069	/* KEY_LEFT */
-			0x0102001c	/* KEY_ENTER */
-			0x01030073	/* KEY_VOLUMEUP */
-			0x02000040	/* KEY_F6 */
-			0x02010042	/* KEY_F8 */
-			0x02020043	/* KEY_F9 */
-			0x02030044	/* KEY_F10 */
-			0x0300003b	/* KEY_F1 */
-			0x0301003c	/* KEY_F2 */
-			0x0302003d	/* KEY_F3 */
-			0x03030074>;	/* KEY_POWER */
-};
diff --git a/Documentation/devicetree/bindings/input/imx-keypad.yaml b/Documentation/devicetree/bindings/input/imx-keypad.yaml
new file mode 100644
index 000000000000..7514df62b592
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/imx-keypad.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/imx-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Keypad Port(KPP)
+
+maintainers:
+  - Liu Ying <gnuiyl@gmail.com>
+
+allOf:
+  - $ref: "/schemas/input/matrix-keymap.yaml#"
+
+description: |
+  The KPP is designed to interface with a keypad matrix with 2-point contact
+  or 3-point contact keys. The KPP is designed to simplify the software task
+  of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
+  and decoding one or multiple keys pressed simultaneously on a keypad.
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx21-kpp
+      - items:
+          - enum:
+              - fsl,imx25-kpp
+              - fsl,imx27-kpp
+              - fsl,imx31-kpp
+              - fsl,imx35-kpp
+              - fsl,imx51-kpp
+              - fsl,imx53-kpp
+              - fsl,imx50-kpp
+              - fsl,imx6q-kpp
+              - fsl,imx6sx-kpp
+              - fsl,imx6sl-kpp
+              - fsl,imx6sll-kpp
+              - fsl,imx6ul-kpp
+              - fsl,imx7d-kpp
+          - const: fsl,imx21-kpp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    keypad@73f94000 {
+        compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
+        reg = <0x73f94000 0x4000>;
+        interrupts = <60>;
+        clocks = <&clks 0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_kpp_1>;
+        linux,keymap = <0x00000067	/* KEY_UP */
+                        0x0001006c	/* KEY_DOWN */
+                        0x00020072	/* KEY_VOLUMEDOWN */
+                        0x00030066	/* KEY_HOME */
+                        0x0100006a	/* KEY_RIGHT */
+                        0x01010069	/* KEY_LEFT */
+                        0x0102001c	/* KEY_ENTER */
+                        0x01030073	/* KEY_VOLUMEUP */
+                        0x02000040	/* KEY_F6 */
+                        0x02010042	/* KEY_F8 */
+                        0x02020043	/* KEY_F9 */
+                        0x02030044	/* KEY_F10 */
+                        0x0300003b	/* KEY_F1 */
+                        0x0301003c	/* KEY_F2 */
+                        0x0302003d	/* KEY_F3 */
+                        0x03030074>;	/* KEY_POWER */
+    };
diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml
index 6d519046b3af..17512f4347fd 100644
--- a/Documentation/devicetree/bindings/input/input.yaml
+++ b/Documentation/devicetree/bindings/input/input.yaml
@@ -18,11 +18,29 @@ properties:
     description:
       Specifies an array of numeric keycode values to be used for reporting
       button presses.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          minimum: 0
-          maximum: 0xff
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minimum: 0
+      maximum: 0x2ff
+
+  linux,code:
+    description:
+      Specifies a single numeric keycode value to be used for reporting
+      button/switch events. Specify KEY_RESERVED (0) to opt out of event
+      reporting.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0x2ff
+
+  linux,input-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1   # EV_KEY
+      - 2   # EV_REL
+      - 3   # EV_ABS
+      - 5   # EV_SW
+    description:
+      Specifies whether the event is to be interpreted as a key, relative,
+      absolute, or switch.
 
   poll-interval:
     description: Poll interval time in milliseconds.
@@ -33,4 +51,14 @@ properties:
       Duration in seconds which the key should be kept pressed for device to
       power off automatically. Device with key pressed shutdown feature can
       specify this property.
-    $ref: /schemas/types.yaml#/definitions/uint32
+
+  reset-time-sec:
+    description:
+      Duration in seconds which the key should be kept pressed for device to
+      reset automatically. Device with key pressed reset feature can specify
+      this property.
+
+dependencies:
+  linux,input-type: [ "linux,code" ]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml
new file mode 100644
index 000000000000..3c430d38594f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs269a.yaml
@@ -0,0 +1,552 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs269a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS269A Capacitive Touch Controller
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS269A is an 8-channel capacitive touch controller that features
+  additional Hall-effect and inductive sensing capabilities.
+
+  Link to datasheet: https://www.azoteq.com/
+
+properties:
+  compatible:
+    const: azoteq,iqs269a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  azoteq,hall-enable:
+    type: boolean
+    description:
+      Enables Hall-effect sensing on channels 6 and 7. In this case, keycodes
+      assigned to channel 6 are ignored and keycodes assigned to channel 7 are
+      interpreted as switch codes. Refer to the datasheet for requirements im-
+      posed on channels 6 and 7 by Hall-effect sensing.
+
+  azoteq,suspend-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Specifies the power mode during suspend as follows:
+      0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
+      1: Low power (all sensing at a reduced reporting rate)
+      2: Ultra-low power (channel 0 proximity sensing)
+      3: Halt (no sensing)
+
+  azoteq,clk-div:
+    type: boolean
+    description: Divides the device's core clock by a factor of 4.
+
+  azoteq,ulp-update:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 3
+    description: Specifies the ultra-low-power mode update rate.
+
+  azoteq,reseed-offset:
+    type: boolean
+    description:
+      Applies an 8-count offset to all long-term averages upon either ATI or
+      reseed events.
+
+  azoteq,filt-str-lp-lta:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Specifies the long-term average filter strength during low-power mode.
+
+  azoteq,filt-str-lp-cnt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Specifies the raw count filter strength during low-power mode.
+
+  azoteq,filt-str-np-lta:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Specifies the long-term average filter strength during normal-power mode.
+
+  azoteq,filt-str-np-cnt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Specifies the raw count filter strength during normal-power mode.
+
+  azoteq,rate-np-ms:
+    minimum: 0
+    maximum: 255
+    default: 16
+    description: Specifies the report rate (in ms) during normal-power mode.
+
+  azoteq,rate-lp-ms:
+    minimum: 0
+    maximum: 255
+    default: 160
+    description: Specifies the report rate (in ms) during low-power mode.
+
+  azoteq,rate-ulp-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 160
+    description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+  azoteq,timeout-pwr-ms:
+    multipleOf: 512
+    minimum: 0
+    maximum: 130560
+    default: 2560
+    description:
+      Specifies the length of time (in ms) to wait for an event during normal-
+      power mode before transitioning to low-power mode.
+
+  azoteq,timeout-lta-ms:
+    multipleOf: 512
+    minimum: 0
+    maximum: 130560
+    default: 32768
+    description:
+      Specifies the length of time (in ms) to wait before resetting the long-
+      term average of all channels. Specify the maximum timeout to disable it
+      altogether.
+
+  azoteq,ati-band-disable:
+    type: boolean
+    description: Disables the ATI band check.
+
+  azoteq,ati-lp-only:
+    type: boolean
+    description: Limits automatic ATI to low-power mode.
+
+  azoteq,ati-band-tighten:
+    type: boolean
+    description: Tightens the ATI band from 1/8 to 1/16 of the desired target.
+
+  azoteq,filt-disable:
+    type: boolean
+    description: Disables all raw count filtering.
+
+  azoteq,gpio3-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 0
+    description:
+      Selects the channel for which the GPIO3 pin represents touch state.
+
+  azoteq,dual-direction:
+    type: boolean
+    description:
+      Specifies that long-term averages are to freeze in the presence of either
+      increasing or decreasing counts, thereby permitting events to be reported
+      in either direction.
+
+  azoteq,tx-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Specifies the inductive sensing excitation frequency as follows (paren-
+      thesized numbers represent the frequency if 'azoteq,clk-div' is present):
+      0: 16 MHz (4 MHz)
+      1: 8 MHz (2 MHz)
+      2: 4 MHz (1 MHz)
+      3: 2 MHz (500 kHz)
+
+  azoteq,global-cap-increase:
+    type: boolean
+    description: Increases the global capacitance adder from 0.5 pF to 1.5 pF.
+
+  azoteq,reseed-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Specifies the event(s) that prompt the device to reseed (i.e. reset the
+      long-term average) of an associated channel as follows:
+      0: None
+      1: Proximity
+      2: Proximity or touch
+      3: Proximity, touch or deep touch
+
+  azoteq,tracking-enable:
+    type: boolean
+    description:
+      Enables all associated channels to track their respective reference
+      channels.
+
+  azoteq,filt-str-slider:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 1
+    description: Specifies the slider coordinate filter strength.
+
+patternProperties:
+  "^channel@[0-7]$":
+    type: object
+    description:
+      Represents a single sensing channel. A channel is active if defined and
+      inactive otherwise.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+        description: Index of the channel.
+
+      azoteq,reseed-disable:
+        type: boolean
+        description:
+          Prevents the channel from being reseeded if the long-term average
+          timeout (defined in 'azoteq,timeout-lta') expires.
+
+      azoteq,blocking-enable:
+        type: boolean
+        description: Specifies that the channel is a blocking channel.
+
+      azoteq,slider0-select:
+        type: boolean
+        description: Specifies that the channel participates in slider 0.
+
+      azoteq,slider1-select:
+        type: boolean
+        description: Specifies that the channel participates in slider 1.
+
+      azoteq,rx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        description:
+          Specifies the CRX pin(s) associated with the channel. By default, only
+          the CRX pin corresponding to the channel's index is enabled (e.g. CRX0
+          for channel 0).
+
+      azoteq,tx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        default: [0, 1, 2, 3, 4, 5, 6, 7]
+        description: Specifies the TX pin(s) associated with the channel.
+
+      azoteq,meas-cap-decrease:
+        type: boolean
+        description:
+          Decreases the internal measurement capacitance from 60 pF to 15 pF.
+
+      azoteq,rx-float-inactive:
+        type: boolean
+        description: Floats any inactive CRX pins instead of grounding them.
+
+      azoteq,local-cap-size:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+        description: |
+          Specifies the capacitance to be added to the channel as follows:
+          0: None
+          1: Global adder (based on 'azoteq,global-cap-increase')
+          2: Global adder + 0.5 pF
+
+      azoteq,invert-enable:
+        type: boolean
+        description:
+          Inverts the polarity of the states reported for proximity, touch and
+          deep-touch events relative to their respective thresholds.
+
+      azoteq,proj-bias:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 2
+        description: |
+          Specifies the bias current applied during projected-capacitance
+          sensing as follows:
+          0: 2.5 uA
+          1: 5 uA
+          2: 10 uA
+          3: 20 uA
+
+      azoteq,sense-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 9, 14, 15]
+        default: 0
+        description: |
+          Specifies the channel's sensing mode as follows:
+          0:  Self capacitance
+          1:  Projected capacitance
+          9:  Self or mutual inductance
+          14: Hall effect
+          15: Temperature
+
+      azoteq,sense-freq:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
+        description: |
+          Specifies the channel's sensing frequency as follows (parenthesized
+          numbers represent the frequency if 'azoteq,clk-div' is present):
+          0: 4 MHz (1 MHz)
+          1: 2 MHz (500 kHz)
+          2: 1 MHz (250 kHz)
+          3: 500 kHz (125 kHz)
+
+      azoteq,static-enable:
+        type: boolean
+        description: Enables the static front-end for the channel.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 3
+        description: |
+          Specifies the channel's ATI mode as follows:
+          0: Disabled
+          1: Semi-partial
+          2: Partial
+          3: Full
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [75, 100, 150, 200]
+        default: 100
+        description: Specifies the channel's ATI base.
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 32
+        minimum: 0
+        maximum: 2016
+        default: 512
+        description: Specifies the channel's ATI target.
+
+      azoteq,assoc-select:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        description:
+          Specifies the associated channels for which the channel serves as a
+          reference channel. By default, no channels are selected.
+
+      azoteq,assoc-weight:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        default: 0
+        description:
+          Specifies the channel's impact weight if it acts as an associated
+          channel (0 = 0% impact, 255 = 200% impact).
+
+    patternProperties:
+      "^event-prox(-alt)?$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a proximity event reported by the channel in response to
+          a decrease in counts. Node names suffixed with '-alt' instead corre-
+          spond to an increase in counts.
+
+          By default, the long-term average tracks an increase in counts such
+          that only events corresponding to a decrease in counts are reported
+          (refer to the datasheet for more information).
+
+          Specify 'azoteq,dual-direction' to freeze the long-term average when
+          the counts increase or decrease such that events of either direction
+          can be reported. Alternatively, specify 'azoteq,invert-enable' to in-
+          vert the polarity of the states reported by the channel.
+
+          Complementary events (e.g. event-touch and event-touch-alt) can both
+          be present and specify different key or switch codes, but not differ-
+          ent thresholds or hysteresis (if applicable).
+
+        properties:
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 10
+            description: Specifies the threshold for the event.
+
+          linux,code: true
+
+        additionalProperties: false
+
+      "^event-touch(-alt)?$":
+        type: object
+        $ref: input.yaml#
+        description: Represents a touch event reported by the channel.
+
+        properties:
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 8
+            description: Specifies the threshold for the event.
+
+          azoteq,hyst:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 15
+            default: 4
+            description: Specifies the hysteresis for the event.
+
+          linux,code: true
+
+        additionalProperties: false
+
+      "^event-deep(-alt)?$":
+        type: object
+        $ref: input.yaml#
+        description: Represents a deep-touch event reported by the channel.
+
+        properties:
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 26
+            description: Specifies the threshold for the event.
+
+          azoteq,hyst:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 15
+            default: 0
+            description: Specifies the hysteresis for the event.
+
+          linux,code: true
+
+        additionalProperties: false
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            touch@44 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    compatible = "azoteq,iqs269a";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    azoteq,hall-enable;
+                    azoteq,suspend-mode = <2>;
+
+                    channel@0 {
+                            reg = <0x0>;
+
+                            event-prox {
+                                    linux,code = <KEY_POWER>;
+                            };
+                    };
+
+                    channel@1 {
+                            reg = <0x1>;
+                            azoteq,slider0-select;
+                    };
+
+                    channel@2 {
+                            reg = <0x2>;
+                            azoteq,slider0-select;
+                    };
+
+                    channel@3 {
+                            reg = <0x3>;
+                            azoteq,slider0-select;
+                    };
+
+                    channel@4 {
+                            reg = <0x4>;
+                            azoteq,slider0-select;
+                    };
+
+                    channel@5 {
+                            reg = <0x5>;
+                            azoteq,slider0-select;
+                    };
+
+                    channel@6 {
+                            reg = <0x6>;
+                            azoteq,invert-enable;
+                            azoteq,static-enable;
+                            azoteq,reseed-disable;
+                            azoteq,rx-enable = <0>;
+                            azoteq,sense-freq = <0x0>;
+                            azoteq,sense-mode = <0xE>;
+                            azoteq,ati-mode = <0x0>;
+                            azoteq,ati-base = <200>;
+                            azoteq,ati-target = <320>;
+                    };
+
+                    channel@7 {
+                            reg = <0x7>;
+                            azoteq,invert-enable;
+                            azoteq,static-enable;
+                            azoteq,reseed-disable;
+                            azoteq,rx-enable = <0>, <6>;
+                            azoteq,sense-freq = <0x0>;
+                            azoteq,sense-mode = <0xE>;
+                            azoteq,ati-mode = <0x3>;
+                            azoteq,ati-base = <200>;
+                            azoteq,ati-target = <320>;
+
+                            event-touch {
+                                    linux,code = <SW_LID>;
+                            };
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml
new file mode 100644
index 000000000000..7a27502095f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs626a.yaml
@@ -0,0 +1,838 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs626a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS626A Capacitive Touch Controller
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS626A is a 14-channel capacitive touch controller that features
+  additional Hall-effect and inductive sensing capabilities.
+
+  Link to datasheet: https://www.azoteq.com/
+
+allOf:
+  - $ref: touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    const: azoteq,iqs626a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  azoteq,suspend-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Specifies the power mode during suspend as follows:
+      0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
+      1: Low power (all sensing at a reduced reporting rate)
+      2: Ultra-low power (ULP channel proximity sensing)
+      3: Halt (no sensing)
+
+  azoteq,clk-div:
+    type: boolean
+    description: Divides the device's core clock by a factor of 4.
+
+  azoteq,ulp-enable:
+    type: boolean
+    description:
+      Permits the device to automatically enter ultra-low-power mode from low-
+      power mode.
+
+  azoteq,ulp-update:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 3
+    description: |
+      Specifies the rate at which the trackpad, generic and Hall channels are
+      updated during ultra-low-power mode as follows:
+      0: 8
+      1: 13
+      2: 28
+      3: 54
+      4: 89
+      5: 135
+      6: 190
+      7: 256
+
+  azoteq,ati-band-disable:
+    type: boolean
+    description: Disables the ATI band check.
+
+  azoteq,ati-lp-only:
+    type: boolean
+    description: Limits automatic ATI to low-power mode.
+
+  azoteq,gpio3-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 1
+    description: |
+      Selects the channel or group of channels for which the GPIO3 pin
+      represents touch state as follows:
+      0: None
+      1: ULP channel
+      2: Trackpad
+      3: Trackpad
+      4: Generic channel 0
+      5: Generic channel 1
+      6: Generic channel 2
+      7: Hall channel
+
+  azoteq,reseed-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Specifies the event(s) that prompt the device to reseed (i.e. reset the
+      long-term average) of an associated channel as follows:
+      0: None
+      1: Proximity
+      2: Proximity or touch
+      3: Proximity, touch or deep touch
+
+  azoteq,thresh-extend:
+    type: boolean
+    description: Multiplies all touch and deep-touch thresholds by 4.
+
+  azoteq,tracking-enable:
+    type: boolean
+    description:
+      Enables all associated channels to track their respective reference
+      channels.
+
+  azoteq,reseed-offset:
+    type: boolean
+    description:
+      Applies an 8-count offset to all long-term averages upon either ATI or
+      reseed events.
+
+  azoteq,rate-np-ms:
+    minimum: 0
+    maximum: 255
+    default: 150
+    description: Specifies the report rate (in ms) during normal-power mode.
+
+  azoteq,rate-lp-ms:
+    minimum: 0
+    maximum: 255
+    default: 150
+    description: Specifies the report rate (in ms) during low-power mode.
+
+  azoteq,rate-ulp-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 0
+    description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+  azoteq,timeout-pwr-ms:
+    multipleOf: 512
+    minimum: 0
+    maximum: 130560
+    default: 2560
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from normal-power mode to low-power mode, or (if 'azoteq,ulp-enable' is
+      present) from low-power mode to ultra-low-power mode.
+
+  azoteq,timeout-lta-ms:
+    multipleOf: 512
+    minimum: 0
+    maximum: 130560
+    default: 40960
+    description:
+      Specifies the length of time (in ms) to wait before resetting the long-
+      term average of all channels. Specify the maximum timeout to disable it
+      altogether.
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+patternProperties:
+  "^ulp-0|generic-[0-2]|hall$":
+    type: object
+    description:
+      Represents a single sensing channel. A channel is active if defined and
+      inactive otherwise.
+
+    properties:
+      azoteq,ati-exclude:
+        type: boolean
+        description:
+          Prevents the channel from participating in an ATI event that is
+          manually triggered during initialization.
+
+      azoteq,reseed-disable:
+        type: boolean
+        description:
+          Prevents the channel from being reseeded if the long-term average
+          timeout (defined in 'azoteq,timeout-lta') expires.
+
+      azoteq,meas-cap-decrease:
+        type: boolean
+        description:
+          Decreases the internal measurement capacitance from 60 pF to 15 pF.
+
+      azoteq,rx-inactive:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+        description: |
+          Specifies how inactive CRX pins are to be terminated as follows:
+          0: VSS
+          1: Floating
+          2: VREG (generic channels only)
+
+      azoteq,linearize:
+        type: boolean
+        description:
+          Enables linearization of the channel's counts (generic and Hall
+          channels) or inverts the polarity of the channel's proximity or
+          touch states (ULP channel).
+
+      azoteq,dual-direction:
+        type: boolean
+        description:
+          Specifies that the channel's long-term average is to freeze in the
+          presence of either increasing or decreasing counts, thereby permit-
+          ting events to be reported in either direction.
+
+      azoteq,filt-disable:
+        type: boolean
+        description: Disables raw count filtering for the channel.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the channel's ATI mode as follows:
+          0: Disabled
+          1: Semi-partial
+          2: Partial
+          3: Full
+
+          The default value is a function of the channel and the device's reset
+          user interface (RUI); reference the datasheet for further information
+          about the available RUI options.
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [75, 100, 150, 200]
+        description:
+          Specifies the channel's ATI base. The default value is a function
+          of the channel and the device's RUI.
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 32
+        minimum: 0
+        maximum: 2016
+        description:
+          Specifies the channel's ATI target. The default value is a function
+          of the channel and the device's RUI.
+
+      azoteq,cct-increase:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 16
+        default: 0
+        description:
+          Specifies the degree to which the channel's charge cycle time is to
+          be increased, with 0 representing no increase. The maximum value is
+          limited to 4 in the case of the ULP channel, and the property is un-
+          available entirely in the case of the Hall channel.
+
+      azoteq,proj-bias:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Specifies the bias current applied during projected-capacitance
+          sensing as follows:
+          0: 2.5 uA
+          1: 5 uA
+          2: 10 uA
+          3: 20 uA
+
+          This property is unavailable in the case of the Hall channel.
+
+      azoteq,sense-freq:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the channel's sensing frequency as follows (parenthesized
+          numbers represent the frequency if 'azoteq,clk-div' is present):
+          0: 4 MHz (1 MHz)
+          1: 2 MHz (500 kHz)
+          2: 1 MHz (250 kHz)
+          3: 500 kHz (125 kHz)
+
+          This property is unavailable in the case of the Hall channel. The
+          default value is a function of the channel and the device's RUI.
+
+      azoteq,ati-band-tighten:
+        type: boolean
+        description:
+          Tightens the ATI band from 1/8 to 1/16 of the desired target (ULP and
+          generic channels only).
+
+      azoteq,proj-enable:
+        type: boolean
+        description: Enables projected-capacitance sensing (ULP channel only).
+
+      azoteq,filt-str-np-cnt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description:
+          Specifies the raw count filter strength during normal-power mode (ULP
+          and generic channels only).
+
+      azoteq,filt-str-lp-cnt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description:
+          Specifies the raw count filter strength during low-power mode (ULP and
+          generic channels only).
+
+      azoteq,filt-str-np-lta:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description:
+          Specifies the long-term average filter strength during normal-power
+          mode (ULP and generic channels only).
+
+      azoteq,filt-str-lp-lta:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description:
+          Specifies the long-term average filter strength during low-power mode
+          (ULP and generic channels only).
+
+      azoteq,rx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        description:
+          Specifies the CRX pin(s) associated with the channel.
+
+          This property is unavailable in the case of the Hall channel. The
+          default value is a function of the channel and the device's RUI.
+
+      azoteq,tx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        description:
+          Specifies the TX pin(s) associated with the channel.
+
+          This property is unavailable in the case of the Hall channel. The
+          default value is a function of the channel and the device's RUI.
+
+      azoteq,local-cap-size:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4]
+        default: 0
+        description: |
+          Specifies the capacitance to be added to the channel as follows:
+          0: 0 pF
+          1: 0.5 pF
+          2: 1.0 pF
+          3: 1.5 pF
+          4: 2.0 pF
+
+          This property is unavailable in the case of the ULP or Hall channels.
+
+      azoteq,sense-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 8, 9, 12, 14, 15]
+        description: |
+          Specifies the channel's sensing mode as follows:
+          0:  Self capacitance
+          1:  Projected capacitance
+          8:  Self inductance
+          9:  Mutual inductance
+          12: External
+          14: Hall effect
+          15: Temperature
+
+          This property is unavailable in the case of the ULP or Hall channels.
+          The default value is a function of the channel and the device's RUI.
+
+      azoteq,tx-freq:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Specifies the inductive sensing excitation frequency as follows
+          (parenthesized numbers represent the frequency if 'azoteq,clk-div'
+          is present):
+          0: 16 MHz (4 MHz)
+          1: 8 MHz (2 MHz)
+          2: 4 MHz (1 MHz)
+          3: 2 MHz (500 kHz)
+
+          This property is unavailable in the case of the ULP or Hall channels.
+
+      azoteq,invert-enable:
+        type: boolean
+        description:
+          Inverts the polarity of the states reported for proximity, touch and
+          deep-touch events relative to their respective thresholds (generic
+          channels only).
+
+      azoteq,comp-disable:
+        type: boolean
+        description:
+          Disables compensation for the channel (generic channels only).
+
+      azoteq,static-enable:
+        type: boolean
+        description:
+          Enables the static front-end for the channel (generic channels only).
+
+      azoteq,assoc-select:
+        $ref: /schemas/types.yaml#/definitions/string-array
+        minItems: 1
+        maxItems: 6
+        items:
+          enum:
+            - ulp-0
+            - trackpad-3x2
+            - trackpad-3x3
+            - generic-0
+            - generic-1
+            - generic-2
+            - hall
+        description:
+          Specifies the associated channels for which the channel serves as a
+          reference channel. By default, no channels are selected. This prop-
+          erty is only available for the generic channels.
+
+      azoteq,assoc-weight:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        default: 0
+        description:
+          Specifies the channel's impact weight if it acts as an associated
+          channel (0 = 0% impact, 255 = 200% impact). This property is only
+          available for the generic channels.
+
+    patternProperties:
+      "^event-(prox|touch|deep)(-alt)?$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a proximity, touch or deep-touch event reported by the
+          channel in response to a decrease in counts. Node names suffixed with
+          '-alt' instead correspond to an increase in counts.
+
+          By default, the long-term average tracks an increase in counts such
+          that only events corresponding to a decrease in counts are reported
+          (refer to the datasheet for more information).
+
+          Specify 'azoteq,dual-direction' to freeze the long-term average when
+          the counts increase or decrease such that events of either direction
+          can be reported. Alternatively, specify 'azoteq,invert-enable' to in-
+          vert the polarity of the states reported by the channel.
+
+          Complementary events (e.g. event-touch and event-touch-alt) can both
+          be present and specify different key or switch codes, but not differ-
+          ent thresholds or hysteresis (if applicable).
+
+          Proximity events are unavailable in the case of the Hall channel, and
+          deep-touch events are only available for the generic channels. Unless
+          otherwise specified, default values are a function of the channel and
+          the device's RUI.
+
+        properties:
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            description: Specifies the threshold for the event.
+
+          azoteq,hyst:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 15
+            description:
+              Specifies the hysteresis for the event (touch and deep-touch
+              events only).
+
+          linux,code: true
+
+          linux,input-type:
+            enum: [1, 5]
+            description:
+              Specifies whether the event is to be interpreted as a key (1) or
+              a switch (5). By default, Hall-channel events are interpreted as
+              switches and all others are interpreted as keys.
+
+        additionalProperties: false
+
+    dependencies:
+      azoteq,assoc-weight: ["azoteq,assoc-select"]
+
+    additionalProperties: false
+
+  "^trackpad-3x[2-3]$":
+    type: object
+    $ref: input.yaml#
+    description:
+      Represents all channels associated with the trackpad. The channels are
+      collectively active if the trackpad is defined and inactive otherwise.
+
+    properties:
+      azoteq,ati-exclude:
+        type: boolean
+        description:
+          Prevents the trackpad channels from participating in an ATI event
+          that is manually triggered during initialization.
+
+      azoteq,reseed-disable:
+        type: boolean
+        description:
+          Prevents the trackpad channels from being reseeded if the long-term
+          average timeout (defined in 'azoteq,timeout-lta') expires.
+
+      azoteq,meas-cap-decrease:
+        type: boolean
+        description:
+          Decreases the internal measurement capacitance from 60 pF to 15 pF.
+
+      azoteq,rx-inactive:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        default: 0
+        description: |
+          Specifies how inactive CRX pins are to be terminated as follows:
+          0: VSS
+          1: Floating
+
+      azoteq,linearize:
+        type: boolean
+        description: Inverts the polarity of the trackpad's touch state.
+
+      azoteq,dual-direction:
+        type: boolean
+        description:
+          Specifies that the trackpad's long-term averages are to freeze in
+          the presence of either increasing or decreasing counts, thereby
+          permitting events to be reported in either direction.
+
+      azoteq,filt-disable:
+        type: boolean
+        description: Disables raw count filtering for the trackpad channels.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Specifies the trackpad's ATI mode as follows:
+          0: Disabled
+          1: Semi-partial
+          2: Partial
+          3: Full
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 6
+        maxItems: 9
+        items:
+          minimum: 45
+          maximum: 300
+        default: [45, 45, 45, 45, 45, 45, 45, 45, 45]
+        description: Specifies each individual trackpad channel's ATI base.
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 32
+        minimum: 0
+        maximum: 2016
+        default: 0
+        description: Specifies the trackpad's ATI target.
+
+      azoteq,cct-increase:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 4
+        default: 0
+        description:
+          Specifies the degree to which the trackpad's charge cycle time is to
+          be increased, with 0 representing no increase.
+
+      azoteq,proj-bias:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Specifies the bias current applied during projected-capacitance
+          sensing as follows:
+          0: 2.5 uA
+          1: 5 uA
+          2: 10 uA
+          3: 20 uA
+
+      azoteq,sense-freq:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Specifies the trackpad's sensing frequency as follows (parenthesized
+          numbers represent the frequency if 'azoteq,clk-div' is present):
+          0: 4 MHz (1 MHz)
+          1: 2 MHz (500 kHz)
+          2: 1 MHz (250 kHz)
+          3: 500 kHz (125 kHz)
+
+      azoteq,ati-band-tighten:
+        type: boolean
+        description:
+          Tightens the ATI band from 1/8 to 1/16 of the desired target.
+
+      azoteq,thresh:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 6
+        maxItems: 9
+        items:
+          minimum: 0
+          maximum: 255
+        default: [0, 0, 0, 0, 0, 0, 0, 0, 0]
+        description:
+          Specifies each individual trackpad channel's touch threshold.
+
+      azoteq,hyst:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+        description: Specifies the trackpad's touch hysteresis.
+
+      azoteq,lta-update:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4, 5, 6, 7]
+        default: 0
+        description: |
+          Specifies the update rate of the trackpad's long-term average during
+          ultra-low-power mode as follows:
+          0: 2
+          1: 4
+          2: 8
+          3: 16
+          4: 32
+          5: 64
+          6: 128
+          7: 255
+
+      azoteq,filt-str-trackpad:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: Specifies the trackpad coordinate filter strength.
+
+      azoteq,filt-str-np-cnt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description:
+          Specifies the raw count filter strength during normal-power mode.
+
+      azoteq,filt-str-lp-cnt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description:
+          Specifies the raw count filter strength during low-power mode.
+
+      linux,keycodes:
+        minItems: 1
+        maxItems: 6
+        description: |
+          Specifies the numeric keycodes associated with each available gesture
+          in the following order (enter 0 for unused gestures):
+          0: Positive flick or swipe in X direction
+          1: Negative flick or swipe in X direction
+          2: Positive flick or swipe in Y direction
+          3: Negative flick or swipe in Y direction
+          4: Tap
+          5: Hold
+
+      azoteq,gesture-swipe:
+        type: boolean
+        description:
+          Directs the device to interpret axial gestures as a swipe (finger
+          remains on trackpad) instead of a flick (finger leaves trackpad).
+
+      azoteq,timeout-tap-ms:
+        multipleOf: 16
+        minimum: 0
+        maximum: 4080
+        default: 0
+        description:
+          Specifies the length of time (in ms) within which a trackpad touch
+          must be released in order to be interpreted as a tap.
+
+      azoteq,timeout-swipe-ms:
+        multipleOf: 16
+        minimum: 0
+        maximum: 4080
+        default: 0
+        description:
+          Specifies the length of time (in ms) within which an axial gesture
+          must be completed in order to be interpreted as a flick or swipe.
+
+      azoteq,thresh-swipe:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        default: 0
+        description:
+          Specifies the number of points across which an axial gesture must
+          travel in order to be interpreted as a flick or swipe.
+
+    dependencies:
+      azoteq,gesture-swipe: ["linux,keycodes"]
+      azoteq,timeout-tap-ms: ["linux,keycodes"]
+      azoteq,timeout-swipe-ms: ["linux,keycodes"]
+      azoteq,thresh-swipe: ["linux,keycodes"]
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            touch@44 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    compatible = "azoteq,iqs626a";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    azoteq,rate-np-ms = <16>;
+                    azoteq,rate-lp-ms = <160>;
+
+                    azoteq,timeout-pwr-ms = <2560>;
+                    azoteq,timeout-lta-ms = <32768>;
+
+                    ulp-0 {
+                            azoteq,meas-cap-decrease;
+
+                            azoteq,ati-base = <75>;
+                            azoteq,ati-target = <1024>;
+
+                            azoteq,rx-enable = <2>, <3>, <4>,
+                                               <5>, <6>, <7>;
+
+                            event-prox {
+                                    linux,code = <KEY_POWER>;
+                            };
+                    };
+
+                    trackpad-3x3 {
+                            azoteq,filt-str-np-cnt = <1>;
+                            azoteq,filt-str-lp-cnt = <1>;
+
+                            azoteq,hyst = <4>;
+                            azoteq,thresh = <35>, <40>, <40>,
+                                            <38>, <33>, <38>,
+                                            <35>, <35>, <35>;
+
+                            azoteq,ati-mode = <3>;
+                            azoteq,ati-base = <195>, <195>, <195>,
+                                              <195>, <195>, <195>,
+                                              <195>, <195>, <195>;
+                            azoteq,ati-target = <512>;
+
+                            azoteq,proj-bias = <1>;
+                            azoteq,sense-freq = <2>;
+
+                            linux,keycodes = <KEY_VOLUMEUP>,
+                                             <KEY_VOLUMEDOWN>,
+                                             <KEY_NEXTSONG>,
+                                             <KEY_PREVIOUSSONG>,
+                                             <KEY_PLAYPAUSE>,
+                                             <KEY_STOPCD>;
+
+                            azoteq,gesture-swipe;
+                            azoteq,timeout-swipe-ms = <800>;
+                            azoteq,timeout-tap-ms = <400>;
+                            azoteq,thresh-swipe = <40>;
+                    };
+
+                    /*
+                     * Preserve the default register settings for
+                     * the temperature-tracking channel leveraged
+                     * by reset user interface (RUI) 1.
+                     *
+                     * Scalar properties (e.g. ATI mode) are left
+                     * untouched by simply omitting them; boolean
+                     * properties must be specified explicitly as
+                     * needed.
+                     */
+                    generic-2 {
+                            azoteq,reseed-disable;
+                            azoteq,meas-cap-decrease;
+                            azoteq,dual-direction;
+                            azoteq,comp-disable;
+                            azoteq,static-enable;
+                    };
+
+                    hall {
+                            azoteq,reseed-disable;
+                            azoteq,meas-cap-decrease;
+
+                            event-touch {
+                                    linux,code = <SW_LID>;
+                            };
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
new file mode 100644
index 000000000000..0aa951f0ab92
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs62x-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A/621/622/624/625 Keys and Switches
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
+  feature a variety of self-capacitive, mutual-inductive and Hall-effect sens-
+  ing capabilities that can facilitate a variety of contactless key and switch
+  applications.
+
+  These functions are collectively represented by a "keys" child node from the
+  parent MFD driver. See Documentation/devicetree/bindings/mfd/iqs62x.yaml for
+  further details and examples. Sensor hardware configuration (self-capacitive
+  vs. mutual-inductive, etc.) is selected based on the device's firmware.
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs620a-keys
+      - azoteq,iqs621-keys
+      - azoteq,iqs622-keys
+      - azoteq,iqs624-keys
+      - azoteq,iqs625-keys
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 16
+    description: |
+      Specifies the numeric keycodes associated with each available touch or
+      proximity event according to the following table. An 'x' indicates the
+      event is supported for a given device. Specify 0 for unused events.
+
+      -------------------------------------------------------------------------
+      | #  | Event              | IQS620A | IQS621 | IQS622 | IQS624 | IQS625 |
+      -------------------------------------------------------------------------
+      | 0  | CH0 Touch          |    x    |    x   |    x   |    x   |    x   |
+      |    | Antenna 1 Touch*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 1  | CH0 Proximity      |    x    |    x   |    x   |    x   |    x   |
+      |    | Antenna 1 Prox.*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 2  | CH1 Touch          |    x    |    x   |    x   |    x   |    x   |
+      |    | Ant. 1 Deep Touch* |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 3  | CH1 Proximity      |    x    |    x   |    x   |    x   |    x   |
+      -------------------------------------------------------------------------
+      | 4  | CH2 Touch          |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 5  | CH2 Proximity      |    x    |        |        |        |        |
+      |    | Antenna 2 Prox.*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 6  | Metal (+) Touch**  |    x    |    x   |        |        |        |
+      |    | Ant. 2 Deep Touch* |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 7  | Metal (+) Prox.**  |    x    |    x   |        |        |        |
+      |    | Antenna 2 Touch*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 8  | Metal (-) Touch**  |    x    |    x   |        |        |        |
+      -------------------------------------------------------------------------
+      | 9  | Metal (-) Prox.**  |    x    |    x   |        |        |        |
+      -------------------------------------------------------------------------
+      | 10 | SAR Active***      |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 11 | SAR Quick Rel.***  |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 12 | SAR Movement***    |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 13 | SAR Filter Halt*** |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 14 | Wheel Up           |         |        |        |    x   |        |
+      -------------------------------------------------------------------------
+      | 15 | Wheel Down         |         |        |        |    x   |        |
+      -------------------------------------------------------------------------
+      *   Two-channel SAR. Replaces CH0-2 plus metal touch and proximity events
+          if enabled via firmware.
+      **  "+" and "-" refer to the polarity of a channel's delta (LTA - counts),
+          where "LTA" is defined as the channel's long-term average.
+      *** One-channel SAR. Replaces CH0-2 touch and proximity events if enabled
+          via firmware.
+
+patternProperties:
+  "^hall-switch-(north|south)$":
+    type: object
+    $ref: input.yaml#
+    description:
+      Represents north/south-field Hall-effect sensor touch or proximity
+      events. Note that north/south-field orientation is reversed on the
+      IQS620AXzCSR device due to its flip-chip package.
+
+    properties:
+      linux,code: true
+
+      azoteq,use-prox:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          If present, specifies that Hall-effect sensor reporting should
+          use the device's wide-range proximity threshold instead of its
+          close-range touch threshold (default).
+
+    required:
+      - linux,code
+
+    additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - azoteq,iqs624-keys
+          - azoteq,iqs625-keys
+then:
+  patternProperties:
+    "^hall-switch-(north|south)$": false
+
+required:
+  - compatible
+  - linux,keycodes
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.txt b/Documentation/devicetree/bindings/input/matrix-keymap.txt
index c54919fad17e..79f6d01aecaa 100644
--- a/Documentation/devicetree/bindings/input/matrix-keymap.txt
+++ b/Documentation/devicetree/bindings/input/matrix-keymap.txt
@@ -1,27 +1 @@
-A simple common binding for matrix-connected key boards. Currently targeted at
-defining the keys in the scope of linux key codes since that is a stable and
-standardized interface at this time.
-
-Required properties:
-- linux,keymap: an array of packed 1-cell entries containing the equivalent
-  of row, column and linux key-code. The 32-bit big endian cell is packed
-  as:
-	row << 24 | column << 16 | key-code
-
-Optional properties:
-Properties for the number of rows and columns are optional because some
-drivers will use fixed values for these.
-- keypad,num-rows: Number of row lines connected to the keypad controller.
-- keypad,num-columns: Number of column lines connected to the keypad
-  controller.
-
-Some users of this binding might choose to specify secondary keymaps for
-cases where there is a modifier key such as a Fn key. Proposed names
-for said properties are "linux,fn-keymap" or with another descriptive
-word for the modifier other from "Fn".
-
-Example:
-	linux,keymap = < 0x00030012
-			 0x0102003a >;
-	keypad,num-rows = <2>;
-	keypad,num-columns = <8>;
+This file has been moved to matrix-keymap.yaml
diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
new file mode 100644
index 000000000000..6699d5e32dca
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/matrix-keymap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common key matrices binding for matrix-connected key boards
+
+maintainers:
+  - Olof Johansson <olof@lixom.net>
+
+description: |
+  A simple common binding for matrix-connected key boards. Currently targeted at
+  defining the keys in the scope of linux key codes since that is a stable and
+  standardized interface at this time.
+
+  Some users of this binding might choose to specify secondary keymaps for
+  cases where there is a modifier key such as a Fn key. Proposed names
+  for said properties are "linux,fn-keymap" or with another descriptive
+  word for the modifier other from "Fn".
+
+properties:
+  linux,keymap:
+    $ref: '/schemas/types.yaml#/definitions/uint32-array'
+    description: |
+      An array of packed 1-cell entries containing the equivalent of row,
+      column and linux key-code. The 32-bit big endian cell is packed as:
+          row << 24 | column << 16 | key-code
+
+  keypad,num-rows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of row lines connected to the keypad controller.
+
+  keypad,num-columns:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of column lines connected to the keypad controller.
+
+additionalProperties: true
+
+examples:
+  - |
+    keypad {
+        /* ... */
+        linux,keymap = < 0x00030012
+                         0x0102003a >;
+        keypad,num-rows = <2>;
+        keypad,num-columns = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
index 2f2e0b6ebbbd..48edc0c8c1dd 100644
--- a/Documentation/devicetree/bindings/input/max77650-onkey.yaml
+++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
@@ -16,15 +16,15 @@ description: |
   The onkey controller is represented as a sub-node of the PMIC node on
   the device tree.
 
+allOf:
+  - $ref: input.yaml#
+
 properties:
   compatible:
     const: maxim,max77650-onkey
 
   linux,code:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      The key-code to be reported when the key is pressed. Defaults
-      to KEY_POWER.
+    default: 116  # KEY_POWER
 
   maxim,onkey-slide:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -33,3 +33,6 @@ properties:
 
 required:
   - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
new file mode 100644
index 000000000000..d768c30f48fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/mediatek,mt6779-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek's Keypad Controller
+
+maintainers:
+  - Mattijs Korpershoek <mkorpershoek@baylibre.com>
+
+allOf:
+  - $ref: "/schemas/input/matrix-keymap.yaml#"
+
+description: |
+  Mediatek's Keypad controller is used to interface a SoC with a matrix-type
+  keypad device. The keypad controller supports multiple row and column lines.
+  A key can be placed at each intersection of a unique row and a unique column.
+  The keypad controller can sense a key-press and key-release and report the
+  event using a interrupt to the cpu.
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt6779-keypad
+      - items:
+          - enum:
+              - mediatek,mt6873-keypad
+          - const: mediatek,mt6779-keypad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: kpd
+
+  wakeup-source:
+    description: use any event on keypad as wakeup event
+    type: boolean
+
+  debounce-delay-ms:
+    maximum: 256
+    default: 16
+
+  mediatek,keys-per-group:
+    description: each (row, column) group has multiple keys
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    maximum: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        keyboard@10010000 {
+          compatible = "mediatek,mt6779-keypad";
+          reg = <0 0x10010000 0 0x1000>;
+          interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_FALLING>;
+          clocks = <&clk26m>;
+          clock-names = "kpd";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
new file mode 100644
index 000000000000..2f72ec418415
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/mediatek,pmic-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PMIC Keys
+
+maintainers:
+  - Chen Zhong <chen.zhong@mediatek.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  There are two key functions provided by MT6397, MT6323 and other MediaTek
+  PMICs: pwrkey and homekey.
+  The key functions are defined as the subnode of the function node provided
+  by the PMIC that is defined as a Multi-Function Device (MFD).
+
+  For MediaTek MT6323/MT6397 PMIC bindings see
+  Documentation/devicetree/bindings/mfd/mt6397.txt
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6323-keys
+      - mediatek,mt6331-keys
+      - mediatek,mt6358-keys
+      - mediatek,mt6397-keys
+
+  power-off-time-sec: true
+
+  mediatek,long-press-mode:
+    description: |
+      Key long-press force shutdown setting
+      0 - disabled
+      1 - pwrkey
+      2 - pwrkey+homekey
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    maximum: 2
+
+patternProperties:
+  "^((power|home)|(key-[a-z0-9-]+|[a-z0-9-]+-key))$":
+    $ref: input.yaml#
+
+    properties:
+      interrupts:
+        minItems: 1
+        items:
+          - description: Key press interrupt
+          - description: Key release interrupt
+
+      interrupt-names: true
+
+      linux-keycodes:
+        maxItems: 1
+
+      wakeup-source: true
+
+    required:
+      - linux,keycodes
+
+    if:
+      properties:
+        interrupt-names:
+          contains:
+            const: powerkey
+    then:
+      properties:
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: powerkey
+            - const: powerkey_r
+    else:
+      properties:
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: homekey
+            - const: homekey_r
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmic {
+        compatible = "mediatek,mt6397";
+
+        keys {
+          compatible = "mediatek,mt6397-keys";
+          mediatek,long-press-mode = <1>;
+          power-off-time-sec = <0>;
+
+          key-power {
+            linux,keycodes = <KEY_POWER>;
+            wakeup-source;
+          };
+
+          key-home {
+            linux,keycodes = <KEY_VOLUMEDOWN>;
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
new file mode 100644
index 000000000000..96358b12f9b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/microchip,cap11xx.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree bindings for Microchip CAP11xx based capacitive touch sensors
+
+description: |
+  The Microchip CAP1xxx Family of RightTouchTM multiple-channel capacitive
+  touch controllers and LED drivers. The device communication via I2C only.
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - microchip,cap1106
+      - microchip,cap1126
+      - microchip,cap1188
+      - microchip,cap1206
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Property describing the interrupt line the
+      device's ALERT#/CM_IRQ# pin is connected to.
+      The device only has one interrupt source.
+
+  autorepeat:
+    description: |
+      Enables the Linux input system's autorepeat feature on the input device.
+
+  linux,keycodes:
+    minItems: 6
+    maxItems: 6
+    description: |
+      Specifies an array of numeric keycode values to
+      be used for the channels. If this property is
+      omitted, KEY_A, KEY_B, etc are used as defaults.
+      The array must have exactly six entries.
+
+  microchip,sensor-gain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    enum: [1, 2, 4, 8]
+    description: |
+      Defines the gain of the sensor circuitry. This
+      effectively controls the sensitivity, as a
+      smaller delta capacitance is required to
+      generate the same delta count values.
+
+  microchip,irq-active-high:
+    type: boolean
+    description: |
+      By default the interrupt pin is active low
+      open drain. This property allows using the active
+      high push-pull output.
+
+patternProperties:
+  "^led@[0-7]$":
+    type: object
+    description: CAP11xx LEDs
+    $ref: /schemas/leds/common.yaml#
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+      label: true
+
+      linux,default-trigger: true
+
+      default-state: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - $ref: input.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,cap1106
+    then:
+      patternProperties:
+        "^led@[0-7]$": false
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touch@28 {
+        compatible = "microchip,cap1188";
+        interrupt-parent = <&gpio1>;
+        interrupts = <0 0>;
+        reg = <0x28>;
+        autorepeat;
+        microchip,sensor-gain = <2>;
+
+        linux,keycodes = <103>,	/* KEY_UP */
+                         <106>,	/* KEY_RIGHT */
+                         <108>,	/* KEY_DOWN */
+                         <105>,	/* KEY_LEFT */
+                         <109>,	/* KEY_PAGEDOWN */
+                         <104>;	/* KEY_PAGEUP */
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@0 {
+                label = "cap11xx:green:usr0";
+                reg = <0>;
+        };
+
+        led@1 {
+                label = "cap11xx:green:usr1";
+                reg = <1>;
+        };
+
+        led@2 {
+                label = "cap11xx:green:alive";
+                reg = <2>;
+                linux,default-trigger = "heartbeat";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/msm-vibrator.txt b/Documentation/devicetree/bindings/input/msm-vibrator.txt
deleted file mode 100644
index 8dcf014ef2e5..000000000000
--- a/Documentation/devicetree/bindings/input/msm-vibrator.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Device tree bindings for the Qualcomm MSM vibrator
-
-Required properties:
-
-  - compatible: Should be one of
-		"qcom,msm8226-vibrator"
-		"qcom,msm8974-vibrator"
-  - reg: the base address and length of the IO memory for the registers.
-  - pinctrl-names: set to default.
-  - pinctrl-0: phandles pointing to pin configuration nodes. See
-               Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-  - clock-names: set to pwm
-  - clocks: phandle of the clock. See
-            Documentation/devicetree/bindings/clock/clock-bindings.txt
-  - enable-gpios: GPIO that enables the vibrator.
-
-Optional properties:
-
-  - vcc-supply: phandle to the regulator that provides power to the sensor.
-
-Example from a LG Nexus 5 (hammerhead) phone:
-
-vibrator@fd8c3450 {
-	reg = <0xfd8c3450 0x400>;
-	compatible = "qcom,msm8974-vibrator";
-
-	vcc-supply = <&pm8941_l19>;
-
-	clocks = <&mmcc CAMSS_GP1_CLK>;
-	clock-names = "pwm";
-
-	enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&vibrator_pin>;
-};
diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
deleted file mode 100644
index 535d92885372..000000000000
--- a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-MediaTek MT6397/MT6323 PMIC Keys Device Driver
-
-There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
-and homekey. The key functions are defined as the subnode of the function
-node provided by MT6397/MT6323 PMIC that is being defined as one kind
-of Muti-Function Device (MFD)
-
-For MT6397/MT6323 MFD bindings see:
-Documentation/devicetree/bindings/mfd/mt6397.txt
-
-Required properties:
-- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
-- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml
-
-Optional Properties:
-- wakeup-source: See Documentation/devicetree/bindings/power/wakeup-source.txt
-- mediatek,long-press-mode: Long press key shutdown setting, 1 for
-	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
-- power-off-time-sec: See Documentation/devicetree/bindings/input/input.yaml
-
-Example:
-
-	pmic: mt6397 {
-		compatible = "mediatek,mt6397";
-
-		...
-
-		mt6397keys: mt6397keys {
-			compatible = "mediatek,mt6397-keys";
-			mediatek,long-press-mode = <1>;
-			power-off-time-sec = <0>;
-
-			power {
-				linux,keycodes = <116>;
-				wakeup-source;
-			};
-
-			home {
-				linux,keycodes = <114>;
-			};
-		};
-
-	};
diff --git a/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
new file mode 100644
index 000000000000..e4a0ac0fff9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pine64,pinephone-keyboard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pine64 PinePhone keyboard device tree bindings
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  A keyboard accessory is available for the Pine64 PinePhone and PinePhone Pro.
+  It connects via I2C, providing a raw scan matrix, a flashing interface, and a
+  subordinate I2C bus for communication with a battery charger IC.
+
+properties:
+  compatible:
+    const: pine64,pinephone-keyboard
+
+  reg:
+    const: 0x15
+
+  interrupts:
+    maxItems: 1
+
+  vbat-supply:
+    description: Supply for the keyboard MCU
+
+  wakeup-source: true
+
+  i2c:
+    $ref: /schemas/i2c/i2c-controller.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      keyboard@15 {
+        compatible = "pine64,pinephone-keyboard";
+        reg = <0x15>;
+        interrupt-parent = <&r_pio>;
+        interrupts = <0 12 IRQ_TYPE_EDGE_FALLING>; /* PL12 */
+
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          charger@75 {
+            reg = <0x75>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.txt b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
deleted file mode 100644
index 88c775a3fe21..000000000000
--- a/Documentation/devicetree/bindings/input/pwm-vibrator.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* PWM vibrator device tree bindings
-
-Registers a PWM device as vibrator. It is expected, that the vibrator's
-strength increases based on the duty cycle of the enable PWM channel
-(100% duty cycle meaning strongest vibration, 0% meaning no vibration).
-
-The binding supports an optional direction PWM channel, that can be
-driven at fixed duty cycle. If available this is can be used to increase
-the vibration effect of some devices.
-
-Required properties:
-- compatible: should contain "pwm-vibrator"
-- pwm-names: Should contain "enable" and optionally "direction"
-- pwms: Should contain a PWM handle for each entry in pwm-names
-
-Optional properties:
-- vcc-supply: Phandle for the regulator supplying power
-- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in
-                           nanoseconds, defaults to 50% of the channel's
-			   period.
-
-Example from Motorola Droid 4:
-
-&omap4_pmx_core {
-	vibrator_direction_pin: pinmux_vibrator_direction_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
-		>;
-	};
-
-	vibrator_enable_pin: pinmux_vibrator_enable_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
-		>;
-	};
-};
-
-/ {
-	pwm8: dmtimer-pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_direction_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer8>;
-		ti,clock-source = <0x01>;
-	};
-
-	pwm9: dmtimer-pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_enable_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x01>;
-	};
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 1000000000 0>,
-                       <&pwm8 0 1000000000 0>;
-		pwm-names = "enable", "direction";
-		direction-duty-cycle-ns = <1000000000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
new file mode 100644
index 000000000000..a70a636ee112
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/pwm-vibrator.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: PWM vibrator
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  Registers a PWM device as vibrator. It is expected, that the vibrator's
+  strength increases based on the duty cycle of the enable PWM channel
+  (100% duty cycle meaning strongest vibration, 0% meaning no vibration).
+
+  The binding supports an optional direction PWM channel, that can be
+  driven at fixed duty cycle. If available this is can be used to increase
+  the vibration effect of some devices.
+
+properties:
+  compatible:
+    const: pwm-vibrator
+
+  pwm-names:
+    items:
+      - const: enable
+      - const: direction
+    minItems: 1
+
+  pwms:
+    minItems: 1
+    maxItems: 2
+
+  vcc-supply: true
+
+  direction-duty-cycle-ns:
+    description: >
+      Duty cycle of the direction PWM channel in nanoseconds,
+      defaults to 50% of the channel's period.
+
+required:
+  - compatible
+  - pwm-names
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    vibrator {
+        compatible = "pwm-vibrator";
+        pwms = <&pwm9 0 1000000000 0>,
+               <&pwm8 0 1000000000 0>;
+        pwm-names = "enable", "direction";
+        direction-duty-cycle-ns = <1000000000>;
+    };
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
deleted file mode 100644
index 34ab5763f494..000000000000
--- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Qualcomm PM8941 PMIC Power Key
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8941-pwrkey"
-		    "qcom,pm8941-resin"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address of registers for block
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: key change interrupt; The format of the specifier is
-		    defined by the binding document describing the node's
-		    interrupt parent.
-
-- debounce:
-	Usage: optional
-	Value type: <u32>
-	Definition: time in microseconds that key must be pressed or released
-		    for state change interrupt to trigger.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <empty>
-	Definition: presence of this property indicates that the KPDPWR_N pin
-		    should be configured for pull up.
-
-- linux,code:
-	Usage: optional
-	Value type: <u32>
-	Definition: The input key-code associated with the power key.
-		    Use the linux event codes defined in
-		    include/dt-bindings/input/linux-event-codes.h
-		    When property is omitted KEY_POWER is assumed.
-
-EXAMPLE
-
-	pwrkey@800 {
-		compatible = "qcom,pm8941-pwrkey";
-		reg = <0x800>;
-		interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-		debounce = <15625>;
-		bias-pull-up;
-		linux,code = <KEY_POWER>;
-	};
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml
new file mode 100644
index 000000000000..62314a5fdce5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8941-pwrkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8941 PMIC Power Key
+
+maintainers:
+  - Courtney Cavin <courtney.cavin@sonymobile.com>
+  - Vinod Koul <vkoul@kernel.org>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8941-pwrkey
+      - qcom,pm8941-resin
+      - qcom,pmk8350-pwrkey
+      - qcom,pmk8350-resin
+
+  interrupts:
+    maxItems: 1
+
+  debounce:
+    description: |
+          Time in microseconds that key must be pressed or
+          released for state change interrupt to trigger.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  bias-pull-up:
+    description: |
+           Presence of this property indicates that the KPDPWR_N
+           pin should be configured for pull up.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  linux,code:
+    description: |
+           The input key-code associated with the power key.
+           Use the linux event codes defined in
+           include/dt-bindings/input/linux-event-codes.h
+           When property is omitted KEY_POWER is assumed.
+
+required:
+  - compatible
+  - interrupts
+
+unevaluatedProperties: false
+...
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt
deleted file mode 100644
index 64bb990075c3..000000000000
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Qualcomm PM8xxx PMIC Vibrator
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8058-vib"
-		    "qcom,pm8916-vib"
-		    "qcom,pm8921-vib"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: address of vibration control register
-
-EXAMPLE
-
-	vibrator@4a {
-		compatible = "qcom,pm8058-vib";
-		reg = <0x4a>;
-	};
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
new file mode 100644
index 000000000000..c8832cd0d7da
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8xxx-vib.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC Vibrator
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8058-vib
+      - qcom,pm8916-vib
+      - qcom,pm8921-vib
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vibrator@4a {
+            compatible = "qcom,pm8058-vib";
+            reg = <0x4a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.txt b/Documentation/devicetree/bindings/input/regulator-haptic.txt
deleted file mode 100644
index 3ed1c7eb2f97..000000000000
--- a/Documentation/devicetree/bindings/input/regulator-haptic.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Regulator Haptic Device Tree Bindings
-
-Required Properties:
- - compatible : Should be "regulator-haptic"
- - haptic-supply : Power supply to the haptic motor.
-	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
-
- - max-microvolt : The maximum voltage value supplied to the haptic motor.
-		[The unit of the voltage is a micro]
-
- - min-microvolt : The minimum voltage value supplied to the haptic motor.
-		[The unit of the voltage is a micro]
-
-Example:
-
-	haptics {
-		compatible = "regulator-haptic";
-		haptic-supply = <&motor_regulator>;
-		max-microvolt = <2700000>;
-		min-microvolt = <1100000>;
-	};
diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.yaml b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
new file mode 100644
index 000000000000..627891e1ef55
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/regulator-haptic.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Regulator Haptic
+
+maintainers:
+  - Jaewon Kim <jaewon02.kim@samsung.com>
+
+properties:
+  compatible:
+    const: regulator-haptic
+
+  haptic-supply:
+    description: >
+      Power supply to the haptic motor
+
+  max-microvolt:
+    description: >
+      The maximum voltage value supplied to the haptic motor
+
+  min-microvolt:
+    description: >
+      The minimum voltage value supplied to the haptic motor
+
+required:
+  - compatible
+  - haptic-supply
+  - max-microvolt
+  - min-microvolt
+
+additionalProperties: false
+
+examples:
+  - |
+    haptics {
+        compatible = "regulator-haptic";
+        haptic-supply = <&motor_regulator>;
+        max-microvolt = <2700000>;
+        min-microvolt = <1100000>;
+    };
diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
deleted file mode 100644
index f2ec0d4f2dff..000000000000
--- a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Spreadtrum SC27xx PMIC Vibrator
-
-Required properties:
-- compatible: should be "sprd,sc2731-vibrator".
-- reg: address of vibrator control register.
-
-Example :
-
-	sc2731_pmic: pmic@0 {
-		compatible = "sprd,sc2731";
-		reg = <0>;
-		spi-max-frequency = <26000000>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vibrator@eb4 {
-			compatible = "sprd,sc2731-vibrator";
-			reg = <0xeb4>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
new file mode 100644
index 000000000000..a401a0bfcbec
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/sprd,sc27xx-vibrator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC27xx PMIC Vibrator
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc2721-vibrator
+      - sprd,sc2730-vibrator
+      - sprd,sc2731-vibrator
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    sc2731_pmic: pmic@0 {
+      compatible = "sprd,sc2731";
+      reg = <0 0>;
+      spi-max-frequency = <26000000>;
+      interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      vibrator@eb4 {
+        compatible = "sprd,sc2731-vibrator";
+        reg = <0xeb4>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
deleted file mode 100644
index eb8e83736c02..000000000000
--- a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-STMicroelectronics STPMIC1 Onkey
-
-Required properties:
-
-- compatible = "st,stpmic1-onkey";
-- interrupts: interrupt line to use
-- interrupt-names = "onkey-falling", "onkey-rising"
-	onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic
-	onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic
-
-Optional properties:
-
-- st,onkey-clear-cc-flag: onkey is able power on after an
-  over-current shutdown event.
-- st,onkey-pu-inactive: onkey pull up is not active
-- power-off-time-sec: Duration in seconds which the key should be kept
-        pressed for device to power off automatically (from 1 to 16 seconds).
-        see See Documentation/devicetree/bindings/input/input.yaml
-
-Example:
-
-onkey {
-	compatible = "st,stpmic1-onkey";
-	interrupt-parent = <&pmic>;
-	interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
-	interrupt-names = "onkey-falling", "onkey-rising";
-	power-off-time-sec = <10>;
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
index f40f21c642b9..b8db975e9f77 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
@@ -17,10 +17,10 @@ Example:
 		auo_pixcir_ts@5c {
 			compatible = "auo,auo_pixcir_ts";
 			reg = <0x5c>;
-			interrupts = <2 0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 
-			gpios = <&gpf 2 0 2>, /* INT */
-				<&gpf 5 1 0>; /* RST */
+			gpios = <&gpf 2 0 GPIO_LEVEL_HIGH>, /* INT */
+				<&gpf 5 1 GPIO_LEVEL_LOW>; /* RST */
 
 			x-size = <800>;
 			y-size = <600>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml
new file mode 100644
index 000000000000..b5f377215c09
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/azoteq,iqs5xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS550, IQS572 and IQS525 trackpad and touchscreen controllers
+  employ projected-capacitance sensing and can track up to five independent
+  contacts.
+
+  Link to datasheet: https://www.azoteq.com/
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs550
+      - azoteq,iqs572
+      - azoteq,iqs525
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  wakeup-source: true
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            touchscreen@74 {
+                    compatible = "azoteq,iqs550";
+                    reg = <0x74>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+                    reset-gpios = <&gpio 22 (GPIO_ACTIVE_LOW |
+                                             GPIO_PUSH_PULL)>;
+
+                    touchscreen-size-x = <800>;
+                    touchscreen-size-y = <480>;
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
new file mode 100644
index 000000000000..9df685bdc5db
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChipOne ICN8318 Touchscreen Controller Device Tree Bindings
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: chipone,icn8318
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - wake-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@40 {
+            compatible = "chipone,icn8318";
+            reg = <0x40>;
+            interrupt-parent = <&pio>;
+            interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+            pinctrl-names = "default";
+            pinctrl-0 = <&ts_wake_pin_p66>;
+            wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+            touchscreen-size-x = <800>;
+            touchscreen-size-y = <480>;
+            touchscreen-inverted-x;
+            touchscreen-swapped-x-y;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
deleted file mode 100644
index 38b0603f65f3..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* ChipOne icn8318 I2C touchscreen controller
-
-Required properties:
- - compatible		  : "chipone,icn8318"
- - reg			  : I2C slave address of the chip (0x40)
- - interrupts		  : interrupt specification for the icn8318 interrupt
- - wake-gpios		  : GPIO specification for the WAKE input
- - touchscreen-size-x	  : horizontal resolution of touchscreen (in pixels)
- - touchscreen-size-y	  : vertical resolution of touchscreen (in pixels)
-
-Optional properties:
- - pinctrl-names	  : should be "default"
- - pinctrl-0:		  : a phandle pointing to the pin settings for the
-			    control gpios
- - touchscreen-fuzz-x	  : horizontal noise value of the absolute input
-			    device (in pixels)
- - touchscreen-fuzz-y	  : vertical noise value of the absolute input
-			    device (in pixels)
- - touchscreen-inverted-x : X axis is inverted (boolean)
- - touchscreen-inverted-y : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y	  : X and Y axis are swapped (boolean)
-			    Swapping is done after inverting the axis
-
-Example:
-
-i2c@00000000 {
-	/* ... */
-
-	chipone_icn8318@40 {
-		compatible = "chipone,icn8318";
-		reg = <0x40>;
-		interrupt-parent = <&pio>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_wake_pin_p66>;
-		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-	};
-
-	/* ... */
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
index 2e1490a8fe74..ca304357c374 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
@@ -3,15 +3,16 @@
 Required Properties:
 - compatible must be toradex,vf50-touchscreen
 - io-channels: adc channels being used by the Colibri VF50 module
+    IIO ADC for Y-, X-, Y+, X+ connections
 - xp-gpios: FET gate driver for input of X+
 - xm-gpios: FET gate driver for input of X-
 - yp-gpios: FET gate driver for input of Y+
 - ym-gpios: FET gate driver for input of Y-
-- interrupts: pen irq interrupt for touch detection
-- pinctrl-names: "idle", "default", "gpios"
-- pinctrl-0: pinctrl node for pen/touch detection state pinmux
+- interrupts: pen irq interrupt for touch detection, signal from X plate
+- pinctrl-names: "idle", "default"
+- pinctrl-0: pinctrl node for pen/touch detection, pinctrl must provide
+    pull-up resistor on X+, X-.
 - pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux
-- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers
 - vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
 
 Example:
@@ -26,9 +27,8 @@ Example:
 		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "idle","default","gpios";
-		pinctrl-0 = <&pinctrl_touchctrl_idle>;
-		pinctrl-1 = <&pinctrl_touchctrl_default>;
-		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+		pinctrl-names = "idle","default";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
+		pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>;
 		vf50-ts-min-pressure = <200>;
 	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
new file mode 100644
index 000000000000..3225c8d1fdaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress CY8CTMA140 series touchscreen controller bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: cypress,cy8ctma140
+
+  reg:
+    const: 0x20
+
+  clock-frequency:
+    description: I2C client clock frequency, defined for host
+    minimum: 100000
+    maximum: 400000
+
+  interrupts:
+    maxItems: 1
+
+  vcpin-supply:
+    description: Analog power supply regulator on VCPIN pin
+
+  vdd-supply:
+    description: Digital power supply regulator on VDD pin
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+  touchscreen-max-pressure: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+  - touchscreen-max-pressure
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@20 {
+        compatible = "cypress,cy8ctma140";
+        reg = <0x20>;
+        touchscreen-size-x = <480>;
+        touchscreen-size-y = <800>;
+        touchscreen-max-pressure = <255>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+        vdd-supply = <&ab8500_ldo_aux2_reg>;
+        vcpin-supply = <&ab8500_ldo_aux2_reg>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
new file mode 100644
index 000000000000..762e56ee90cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma340.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress CY8CTMA340 series touchscreen controller bindings
+
+description: The Cypress CY8CTMA340 series (also known as "CYTTSP" after
+  the marketing name Cypress TrueTouch Standard Product) touchscreens can
+  be connected to either I2C or SPI buses.
+
+maintainers:
+  - Javier Martinez Canillas <javier@dowhile0.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    oneOf:
+      - const: cypress,cy8ctma340
+      - const: cypress,cy8ctst341
+      - const: cypress,cyttsp-spi
+        description: Legacy compatible for SPI connected CY8CTMA340
+        deprecated: true
+      - const: cypress,cyttsp-i2c
+        description: Legacy compatible for I2C connected CY8CTMA340
+        deprecated: true
+
+  reg:
+    description: I2C address when used on the I2C bus, or the SPI chip
+      select index when used on the SPI bus
+
+  clock-frequency:
+    description: I2C client clock frequency, defined for host when using
+      the device on the I2C bus
+    minimum: 0
+    maximum: 400000
+
+  spi-max-frequency:
+    description: SPI clock frequency, defined for host, defined when using
+      the device on the SPI bus. The throughput is maximum 2 Mbps so the
+      typical value is 2000000, if higher rates are used the total throughput
+      needs to be restricted to 2 Mbps.
+    minimum: 0
+    maximum: 6000000
+
+  interrupts:
+    description: Interrupt to host
+    maxItems: 1
+
+  vcpin-supply:
+    description: Analog power supply regulator on VCPIN pin
+
+  vdd-supply:
+    description: Digital power supply regulator on VDD pin
+
+  reset-gpios:
+    description: Reset line for the touchscreen, should be tagged
+      as GPIO_ACTIVE_LOW
+
+  bootloader-key:
+    description: the 8-byte bootloader key that is required to switch
+      the chip from bootloader mode (default mode) to application mode
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 8
+    maxItems: 8
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+
+  active-distance:
+    description: the distance in pixels beyond which a touch must move
+      before movement is detected and reported by the device
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  active-interval-ms:
+    description: the minimum period in ms between consecutive
+      scanning/processing cycles when the chip is in active mode
+    minimum: 0
+    maximum: 255
+
+  lowpower-interval-ms:
+    description: the minimum period in ms between consecutive
+      scanning/processing cycles when the chip is in low-power mode
+    minimum: 0
+    maximum: 2550
+
+  touch-timeout-ms:
+    description: minimum time in ms spent in the active power state while no
+      touches are detected before entering low-power mode
+    minimum: 0
+    maximum: 2550
+
+  use-handshake:
+    description: enable register-based handshake (boolean). This should only
+      be used if the chip is configured to use 'blocking communication with
+      timeout' (in this case the device generates an interrupt at the end of
+      every scanning/processing cycle)
+    $ref: /schemas/types.yaml#/definitions/flag
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - bootloader-key
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      num-cs = <1>;
+      cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+
+      touchscreen@0 {
+        compatible = "cypress,cy8ctma340";
+        reg = <0>;
+        interrupt-parent = <&gpio>;
+        interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+        vdd-supply = <&ldo_aux1_reg>;
+        vcpin-supply = <&ldo_aux2_reg>;
+        bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
+        touchscreen-size-x = <480>;
+        touchscreen-size-y = <800>;
+        active-interval-ms = <0>;
+        touch-timeout-ms = <255>;
+        lowpower-interval-ms = <10>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
deleted file mode 100644
index 6ee274aa8b03..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-* Cypress cyttsp touchscreen controller
-
-Required properties:
- - compatible		: must be "cypress,cyttsp-i2c" or "cypress,cyttsp-spi"
- - reg			: Device I2C address or SPI chip select number
- - spi-max-frequency	: Maximum SPI clocking speed of the device (for cyttsp-spi)
- - interrupts		: (gpio) interrupt to which the chip is connected
-			  (see interrupt binding[0]).
- - bootloader-key	: the 8-byte bootloader key that is required to switch
-			  the chip from bootloader mode (default mode) to
-			  application mode.
-			  This property has to be specified as an array of 8
-			  '/bits/ 8' values.
-
-Optional properties:
- - reset-gpios		: the reset gpio the chip is connected to
-			  (see GPIO binding[1] for more details).
- - touchscreen-size-x	: horizontal resolution of touchscreen (in pixels)
- - touchscreen-size-y	: vertical resolution of touchscreen (in pixels)
- - touchscreen-fuzz-x	: horizontal noise value of the absolute input device
-			  (in pixels)
- - touchscreen-fuzz-y	: vertical noise value of the absolute input device
-			  (in pixels)
- - active-distance	: the distance in pixels beyond which a touch must move
-			  before movement is detected and reported by the device.
-			  Valid values: 0-15.
- - active-interval-ms	: the minimum period in ms between consecutive
-			  scanning/processing cycles when the chip is in active mode.
-			  Valid values: 0-255.
- - lowpower-interval-ms	: the minimum period in ms between consecutive
-			  scanning/processing cycles when the chip is in low-power mode.
-			  Valid values: 0-2550
- - touch-timeout-ms	: minimum time in ms spent in the active power state while no
-			  touches are detected before entering low-power mode.
-			  Valid values: 0-2550
- - use-handshake	: enable register-based handshake (boolean). This should
-			  only be used if the chip is configured to use 'blocking
-			  communication with timeout' (in this case the device
-			  generates an interrupt at the end of every
-			  scanning/processing cycle).
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/gpio/gpio.txt
-
-Example:
-	&i2c1 {
-		/* ... */
-		cyttsp@a {
-			compatible = "cypress,cyttsp-i2c";
-			reg = <0xa>;
-			interrupt-parent = <&gpio0>;
-			interrupts = <28 0>;
-			reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
-
-			touchscreen-size-x = <800>;
-			touchscreen-size-y = <480>;
-			touchscreen-fuzz-x = <4>;
-			touchscreen-fuzz-y = <7>;
-
-			bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>;
-			active-distance = <8>;
-			active-interval-ms = <0>;
-			lowpower-interval-ms = <200>;
-			touch-timeout-ms = <100>;
-		};
-
-		/* ... */
-	};
-
-	&mcspi1 {
-		/* ... */
-		cyttsp@0 {
-			compatible = "cypress,cyttsp-spi";
-			spi-max-frequency = <6000000>;
-			reg = <0>;
-			interrupt-parent = <&gpio0>;
-			interrupts = <28 0>;
-			reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
-
-			touchscreen-size-x = <800>;
-			touchscreen-size-y = <480>;
-			touchscreen-fuzz-x = <4>;
-			touchscreen-fuzz-y = <7>;
-
-			bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>;
-			active-distance = <8>;
-			active-interval-ms = <0>;
-			lowpower-interval-ms = <200>;
-			touch-timeout-ms = <100>;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
deleted file mode 100644
index 0e57315e9cbd..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-FocalTech EDT-FT5x06 Polytouch driver
-=====================================
-
-There are 5 variants of the chip for various touch panel sizes
-FT5206GE1  2.8" .. 3.8"
-FT5306DE4  4.3" .. 7"
-FT5406EE8  7"   .. 8.9"
-FT5506EEG  7"   .. 8.9"
-FT5726NEI  5.7” .. 11.6"
-
-The software interface is identical for all those chips, so that
-currently there is no need for the driver to distinguish between the
-different chips. Nevertheless distinct compatible strings are used so
-that a distinction can be added if necessary without changing the DT
-bindings.
-
-
-Required properties:
- - compatible:  "edt,edt-ft5206"
-           or:  "edt,edt-ft5306"
-           or:  "edt,edt-ft5406"
-           or:  "edt,edt-ft5506"
-           or:  "evervision,ev-ft5726"
-           or:  "focaltech,ft6236"
-
- - reg:         I2C slave address of the chip (0x38)
- - interrupts:       interrupt specification for the touchdetect
-                     interrupt
-
-Optional properties:
- - reset-gpios: GPIO specification for the RESET input
- - wake-gpios:  GPIO specification for the WAKE input
- - vcc-supply:  Regulator that supplies the touchscreen
-
- - pinctrl-names: should be "default"
- - pinctrl-0:   a phandle pointing to the pin settings for the
-                control gpios
-
- - wakeup-source: If present the device will act as wakeup-source
-
- - threshold:   allows setting the "click"-threshold in the range
-                from 0 to 80.
-
- - gain:        allows setting the sensitivity in the range from 0 to
-                31. Note that lower values indicate higher
-                sensitivity.
-
- - offset:      allows setting the edge compensation in the range from
-                0 to 31.
-
- - offset-x:    Same as offset, but applies only to the horizontal position.
-                Range from 0 to 80, only supported by evervision,ev-ft5726
-                devices.
-
- - offset-y:    Same as offset, but applies only to the vertical position.
-                Range from 0 to 80, only supported by evervision,ev-ft5726
-                devices.
-
- - touchscreen-size-x	   : See touchscreen.txt
- - touchscreen-size-y	   : See touchscreen.txt
- - touchscreen-fuzz-x      : See touchscreen.txt
- - touchscreen-fuzz-y      : See touchscreen.txt
- - touchscreen-inverted-x  : See touchscreen.txt
- - touchscreen-inverted-y  : See touchscreen.txt
- - touchscreen-swapped-x-y : See touchscreen.txt
-
-Example:
-	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&edt_ft5x06_pins>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
new file mode 100644
index 000000000000..46bc8c028fe6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FocalTech EDT-FT5x06 Polytouch Bindings
+
+description: |
+             There are 5 variants of the chip for various touch panel sizes
+              FT5206GE1  2.8" .. 3.8"
+              FT5306DE4  4.3" .. 7"
+              FT5406EE8  7"   .. 8.9"
+              FT5506EEG  7"   .. 8.9"
+              FT5726NEI  5.7” .. 11.6"
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - evervision,ev-ft5726
+
+    then:
+      properties:
+        offset-x: true
+        offset-y: true
+
+properties:
+  compatible:
+    enum:
+      - edt,edt-ft5206
+      - edt,edt-ft5306
+      - edt,edt-ft5406
+      - edt,edt-ft5506
+      - evervision,ev-ft5726
+      - focaltech,ft6236
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+
+  wakeup-source: true
+
+  vcc-supply: true
+  iovcc-supply: true
+
+  gain:
+    description: Allows setting the sensitivity in the range from 0 to 31.
+                 Note that lower values indicate higher sensitivity.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+
+  offset:
+    description: Allows setting the edge compensation in the range from 0 to 31.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+
+  offset-x:
+    description: Same as offset, but applies only to the horizontal position.
+                 Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 80
+
+  offset-y:
+    description: Same as offset, but applies only to the vertical position.
+                 Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 80
+
+  report-rate-hz:
+    description: |
+                 Allows setting the scan rate in Hertz.
+                  M06 supports range from 30 to 140 Hz.
+                  M12 supports range from 1 to 255 Hz.
+    minimum: 1
+    maximum: 255
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      edt-ft5x06@38 {
+        compatible = "edt,edt-ft5406";
+        reg = <0x38>;
+        interrupt-parent = <&gpio2>;
+        interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+        wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
new file mode 100644
index 000000000000..007adbc89c14
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/eeti,exc3000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EETI EXC3000 series touchscreen controller
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - eeti,exc3000
+      - eeti,exc80h60
+      - eeti,exc80h84
+  reg:
+    const: 0x2a
+  interrupts:
+    maxItems: 1
+  reset-gpios:
+    maxItems: 1
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+additionalProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/interrupt-controller/irq.h"
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        touchscreen@2a {
+                compatible = "eeti,exc3000";
+                reg = <0x2a>;
+                interrupt-parent = <&gpio1>;
+                interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+                touchscreen-size-x = <4096>;
+                touchscreen-size-y = <4096>;
+                touchscreen-inverted-x;
+                touchscreen-swapped-x-y;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
index 94c4fc644940..c9f2c9f578e3 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
@@ -1,12 +1,12 @@
 * Elan eKTF2127 I2C touchscreen controller
 
 Required properties:
- - compatible		  : "elan,ektf2127"
+ - compatible		  : "elan,ektf2127" or "elan,ektf2132"
  - reg			  : I2C slave address of the chip (0x40)
  - interrupts		  : interrupt specification for the ektf2127 interrupt
  - power-gpios		  : GPIO specification for the pin connected to the
 			    ektf2127's wake input. This needs to be driven high
-			    to take ektf2127 out of it's low power state
+			    to take ektf2127 out of its low power state
 
 For additional optional properties see: touchscreen.txt
 
diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
new file mode 100644
index 000000000000..f9053e5e9b24
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/touchscreen/elan,elants_i2c.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Elantech I2C Touchscreen
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - elan,ektf3624
+          - elan,ekth3500
+      - items:
+          - const: elan,ekth3915
+          - const: elan,ekth3500
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: touchscreen can be used as a wakeup source.
+
+  reset-gpios:
+    maxItems: 1
+    description: reset gpio the chip is connected to.
+
+  vcc33-supply:
+    description: a phandle for the regulator supplying 3.3V power.
+
+  vccio-supply:
+    description: a phandle for the regulator supplying IO power.
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@10 {
+            compatible = "elan,ekth3500";
+            reg = <0x10>;
+
+            interrupt-parent = <&gpio4>;
+            interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
deleted file mode 100644
index 68291b94fec2..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* EETI EXC3000 Multiple Touch Controller
-
-Required properties:
-- compatible: must be "eeti,exc3000"
-- reg: i2c slave address
-- interrupts: touch controller interrupt
-- touchscreen-size-x: See touchscreen.txt
-- touchscreen-size-y: See touchscreen.txt
-
-Optional properties:
-- touchscreen-inverted-x: See touchscreen.txt
-- touchscreen-inverted-y: See touchscreen.txt
-- touchscreen-swapped-x-y: See touchscreen.txt
-
-Example:
-
-	touchscreen@2a {
-		compatible = "eeti,exc3000";
-		reg = <0x2a>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
index c99ed3934d7e..19ac9da421df 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -16,14 +16,18 @@ properties:
   compatible:
     enum:
       - goodix,gt1151
+      - goodix,gt1158
       - goodix,gt5663
       - goodix,gt5688
       - goodix,gt911
       - goodix,gt9110
       - goodix,gt912
+      - goodix,gt9147
+      - goodix,gt917s
       - goodix,gt927
       - goodix,gt9271
       - goodix,gt928
+      - goodix,gt9286
       - goodix,gt967
 
   reg:
@@ -33,9 +37,8 @@ properties:
     maxItems: 1
 
   irq-gpios:
-    description: GPIO pin used for IRQ.
-                 The driver uses the interrupt gpio pin as
-                 output to reset the device.
+    description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
+      as output to reset the device.
     maxItems: 1
 
   reset-gpios:
@@ -61,7 +64,7 @@ required:
   - interrupts
 
 examples:
-- |
+  - |
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
new file mode 100644
index 000000000000..942562f1e45b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hycon HY46XX series touchscreen controller bindings
+
+description: |
+  There are 6 variants of the chip for various touch panel sizes and cover lens material
+   Glass: 0.3mm--4.0mm
+    PET/PMMA: 0.2mm--2.0mm
+    HY4613(B)-N048  < 6"
+    HY4614(B)-N068  7" .. 10.1"
+    HY4621-NS32  < 5"
+    HY4623-NS48  5.1" .. 7"
+   Glass: 0.3mm--8.0mm
+    PET/PMMA: 0.2mm--4.0mm
+    HY4633(B)-N048  < 6"
+    HY4635(B)-N048  < 7" .. 10.1"
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - hycon,hy4613
+      - hycon,hy4614
+      - hycon,hy4621
+      - hycon,hy4623
+      - hycon,hy4633
+      - hycon,hy4635
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc-supply: true
+
+  hycon,threshold:
+    description: Allows setting the sensitivity in the range from 0 to 255.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+
+  hycon,glove-enable:
+    type: boolean
+    description: Allows enabling glove setting.
+
+  hycon,report-speed-hz:
+    description: Allows setting the report speed in Hertz.
+    minimum: 1
+    maximum: 255
+
+  hycon,noise-filter-enable:
+    type: boolean
+    description: Allows enabling power noise filter.
+
+  hycon,filter-data:
+    description: Allows setting how many samples throw before reporting touch
+                 in the range from 0 to 5.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+
+  hycon,gain:
+    description: Allows setting the sensitivity distance in the range from 0 to 5.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+
+  hycon,edge-offset:
+    description: Allows setting the edge compensation in the range from 0 to 16.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 16
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@1c {
+        compatible = "hycon,hy4633";
+        reg = <0x1c>;
+        interrupt-parent = <&gpio2>;
+        interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
new file mode 100644
index 000000000000..9f7328999756
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ilitek_ts_i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek I2C Touchscreen Controller
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ilitek,ili210x
+      - ilitek,ili2117
+      - ilitek,ili2120
+      - ilitek,ili2130
+      - ilitek,ili2131
+      - ilitek,ili2132
+      - ilitek,ili2316
+      - ilitek,ili2322
+      - ilitek,ili2323
+      - ilitek,ili2326
+      - ilitek,ili251x
+      - ilitek,ili2520
+      - ilitek,ili2521
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: touchscreen can be used as a wakeup source.
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@41 {
+            compatible = "ilitek,ili2520";
+            reg = <0x41>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+            touchscreen-inverted-y;
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
new file mode 100644
index 000000000000..e3a2b871e50c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/imagis,ist3038c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagis IST30XXC family touchscreen controller bindings
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - imagis,ist3038c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Power supply regulator for the chip
+
+  vddio-supply:
+    description: Power supply regulator for the I2C bus
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@50 {
+        compatible = "imagis,ist3038c";
+        reg = <0x50>;
+        interrupt-parent = <&gpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        vdd-supply = <&ldo1_reg>;
+        vddio-supply = <&ldo2_reg>;
+        touchscreen-size-x = <720>;
+        touchscreen-size-y = <1280>;
+        touchscreen-fuzz-x = <10>;
+        touchscreen-fuzz-y = <10>;
+        touchscreen-inverted-x;
+        touchscreen-inverted-y;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt b/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt
deleted file mode 100644
index efa0820e2469..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
-
-Required properties:
-
-- compatible			: Must be equal to one of the following:
-				  "azoteq,iqs550"
-				  "azoteq,iqs572"
-				  "azoteq,iqs525"
-
-- reg				: I2C slave address for the device.
-
-- interrupts			: GPIO to which the device's active-high RDY
-				  output is connected (see [0]).
-
-- reset-gpios			: GPIO to which the device's active-low NRST
-				  input is connected (see [1]).
-
-Optional properties:
-
-- touchscreen-min-x		: See [2].
-
-- touchscreen-min-y		: See [2].
-
-- touchscreen-size-x		: See [2]. If this property is omitted, the
-				  maximum x-coordinate is specified by the
-				  device's "X Resolution" register.
-
-- touchscreen-size-y		: See [2]. If this property is omitted, the
-				  maximum y-coordinate is specified by the
-				  device's "Y Resolution" register.
-
-- touchscreen-max-pressure	: See [2]. Pressure is expressed as the sum of
-				  the deltas across all channels impacted by a
-				  touch event. A channel's delta is calculated
-				  as its count value minus a reference, where
-				  the count value is inversely proportional to
-				  the channel's capacitance.
-
-- touchscreen-fuzz-x		: See [2].
-
-- touchscreen-fuzz-y		: See [2].
-
-- touchscreen-fuzz-pressure	: See [2].
-
-- touchscreen-inverted-x	: See [2]. Inversion is applied relative to that
-				  which may already be specified by the device's
-				  FLIP_X and FLIP_Y register fields.
-
-- touchscreen-inverted-y	: See [2]. Inversion is applied relative to that
-				  which may already be specified by the device's
-				  FLIP_X and FLIP_Y register fields.
-
-- touchscreen-swapped-x-y	: See [2]. Swapping is applied relative to that
-				  which may already be specified by the device's
-				  SWITCH_XY_AXIS register field.
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/gpio/gpio.txt
-[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
-
-Example:
-
-	&i2c1 {
-		/* ... */
-
-		touchscreen@74 {
-			compatible = "azoteq,iqs550";
-			reg = <0x74>;
-			interrupt-parent = <&gpio>;
-			interrupts = <17 4>;
-			reset-gpios = <&gpio 27 1>;
-
-			touchscreen-size-x = <640>;
-			touchscreen-size-y = <480>;
-
-			touchscreen-max-pressure = <16000>;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
new file mode 100644
index 000000000000..62366886fb3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/melfas,mms114.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Melfas MMS114 family touchscreen controller bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    items:
+      - enum:
+          - melfas,mms114
+          - melfas,mms134s
+          - melfas,mms136
+          - melfas,mms152
+          - melfas,mms345l
+
+  reg:
+    description: I2C address
+
+  clock-frequency:
+    description: I2C client clock frequency, defined for host
+    minimum: 100000
+    maximum: 400000
+
+  interrupts:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog power supply regulator on AVDD pin
+
+  vdd-supply:
+    description: Digital power supply regulator on VDD pin
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-fuzz-pressure: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+  touchscreen-max-pressure: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@48 {
+        compatible = "melfas,mms114";
+        reg = <0x48>;
+        interrupt-parent = <&gpio>;
+        interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+        avdd-supply = <&ldo1_reg>;
+        vdd-supply = <&ldo2_reg>;
+        touchscreen-size-x = <720>;
+        touchscreen-size-y = <1280>;
+        touchscreen-fuzz-x = <10>;
+        touchscreen-fuzz-y = <10>;
+        touchscreen-fuzz-pressure = <10>;
+        touchscreen-inverted-x;
+        touchscreen-inverted-y;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
deleted file mode 100644
index 2cd954051d29..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* MELFAS MMS114/MMS152 touchscreen controller
-
-Required properties:
-- compatible: should be one of:
-	- "melfas,mms114"
-	- "melfas,mms152"
-- reg: I2C address of the chip
-- interrupts: interrupt to which the chip is connected
-- touchscreen-size-x: See [1]
-- touchscreen-size-y: See [1]
-
-Optional properties:
-- touchscreen-fuzz-x: See [1]
-- touchscreen-fuzz-y: See [1]
-- touchscreen-fuzz-pressure: See [1]
-- touchscreen-inverted-x: See [1]
-- touchscreen-inverted-y: See [1]
-- touchscreen-swapped-x-y: See [1]
-
-[1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		touchscreen@48 {
-			compatible = "melfas,mms114";
-			reg = <0x48>;
-			interrupts = <39 0>;
-			touchscreen-size-x = <720>;
-			touchscreen-size-y = <1280>;
-			touchscreen-fuzz-x = <10>;
-			touchscreen-fuzz-y = <10>;
-			touchscreen-fuzz-pressure = <10>;
-			touchscreen-inverted-x;
-			touchscreen-inverted-y;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
new file mode 100644
index 000000000000..3a42c23faf6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/mstar,msg2638.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar msg2638 touchscreen controller Bindings
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: mstar,msg2638
+
+  reg:
+    const: 0x26
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply:
+    description: Power supply regulator for the chip
+
+  vddio-supply:
+    description: Power supply regulator for the I2C bus
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@26 {
+        compatible = "mstar,msg2638";
+        reg = <0x26>;
+        interrupt-parent = <&msmgpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&ts_int_reset_default>;
+        vdd-supply = <&pm8916_l17>;
+        vddio-supply = <&pm8916_l5>;
+        touchscreen-size-x = <2048>;
+        touchscreen-size-y = <2048>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
new file mode 100644
index 000000000000..f9998edbff70
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/pixcir,pixcir_ts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pixcir Touchscreen Controller Device Tree Bindings
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - pixcir,pixcir_ts
+      - pixcir,pixcir_tangoc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  attb-gpio:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - attb-gpio
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@5c {
+            compatible = "pixcir,pixcir_ts";
+            reg = <0x5c>;
+            interrupts = <2 0>;
+            attb-gpio = <&gpf 2 0 2>;
+            touchscreen-size-x = <800>;
+            touchscreen-size-y = <600>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
deleted file mode 100644
index 697a3e7831e7..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Pixcir I2C touchscreen controllers
-
-Required properties:
-- compatible: must be "pixcir,pixcir_ts" or "pixcir,pixcir_tangoc"
-- reg: I2C address of the chip
-- interrupts: interrupt to which the chip is connected
-- attb-gpio: GPIO connected to the ATTB line of the chip
-- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
-- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
-
-Optional properties:
-- reset-gpios: GPIO connected to the RESET line of the chip
-- enable-gpios: GPIO connected to the ENABLE line of the chip
-- wake-gpios: GPIO connected to the WAKE line of the chip
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		pixcir_ts@5c {
-			compatible = "pixcir,pixcir_ts";
-			reg = <0x5c>;
-			interrupts = <2 0>;
-			attb-gpio = <&gpf 2 0 2>;
-			touchscreen-size-x = <800>;
-			touchscreen-size-y = <600>;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
deleted file mode 100644
index 51456c0e9a27..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Generic resistive touchscreen ADC
-
-Required properties:
-
- - compatible: must be "resistive-adc-touch"
-The device must be connected to an ADC device that provides channels for
-position measurement and optional pressure.
-Refer to ../iio/iio-bindings.txt for details
- - iio-channels: must have at least two channels connected to an ADC device.
-These should correspond to the channels exposed by the ADC device and should
-have the right index as the ADC device registers them. These channels
-represent the relative position on the "x" and "y" axes.
- - iio-channel-names: must have all the channels' names. Mandatory channels
-are "x" and "y".
-
-Optional properties:
- - iio-channels: The third channel named "pressure" is optional and can be
-used if the ADC device also measures pressure besides position.
-If this channel is missing, pressure will be ignored and the touchscreen
-will only report position.
- - iio-channel-names: optional channel named "pressure".
-
-Example:
-
-	resistive_touch: resistive_touch {
-		compatible = "resistive-adc-touch";
-		touchscreen-min-pressure = <50000>;
-		io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
-		io-channel-names = "x", "y", "pressure";
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
new file mode 100644
index 000000000000..7fc22a403d48
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic resistive touchscreen ADC
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  Generic ADC based resistive touchscreen controller
+  The device must be connected to an ADC device that provides channels for
+  position measurement and optional pressure.
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: resistive-adc-touch
+
+  io-channels:
+    minItems: 2
+    items:
+      - description: x
+      - description: y
+      - description: pressure (optional)
+      - description: z1 (optional)
+      - description: z2 (optional)
+
+  io-channel-names:
+    oneOf:
+      - items:
+          - enum: [x, y]
+          - enum: [x, y]
+      - items:
+          - enum: [x, y, pressure]
+          - enum: [x, y, pressure]
+          - enum: [x, y, pressure]
+      - items:
+          - enum: [x, y, z1, z2]
+          - enum: [x, y, z1, z2]
+          - enum: [x, y, z1, z2]
+          - enum: [x, y, z1, z2]
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+  touchscreen-min-pressure: true
+  touchscreen-x-plate-ohms: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+
+examples:
+  - |
+    touchscreen {
+      compatible = "resistive-adc-touch";
+      io-channels = <&adc 24>, <&adc 25>;
+      io-channel-names = "y", "x";
+    };
+  - |
+    touchscreen {
+      compatible = "resistive-adc-touch";
+      touchscreen-min-pressure = <50000>;
+      io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
+      io-channel-names = "y", "pressure", "x";
+    };
+  - |
+    touchscreen {
+      compatible = "resistive-adc-touch";
+      touchscreen-min-pressure = <50000>;
+      io-channels = <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+      io-channel-names = "x", "z1", "z2", "y";
+      touchscreen-x-plate-ohms = <800>;
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
new file mode 100644
index 000000000000..eec6f7f6f0a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/silead,gsl1680.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silead GSL1680 Touchscreen Controller Device Tree Bindings
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - silead,gsl1680
+      - silead,gsl1688
+      - silead,gsl3670
+      - silead,gsl3675
+      - silead,gsl3692
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-gpios:
+    maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: >
+      File basename for board specific firmware
+
+  silead,max-fingers:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 5
+    description: >
+      Maximum number of fingers the touchscreen can detect
+
+  silead,home-button:
+    type: boolean
+    description: >
+      Does the device have a capacitive home-button build into the
+      touchscreen?
+
+  avdd-supply:
+    description: >
+      Regulator phandle for controller AVDD
+
+  vddio-supply:
+    description: >
+      Regulator phandle for controller VDDIO
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@40 {
+            compatible = "silead,gsl1680";
+            reg = <0x40>;
+            interrupt-parent = <&pio>;
+            interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
+            power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+            touchscreen-size-x = <480>;
+            touchscreen-size-y = <800>;
+            touchscreen-inverted-x;
+            touchscreen-swapped-x-y;
+            silead,max-fingers = <5>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
deleted file mode 100644
index d67e558e5ab5..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* GSL 1680 touchscreen controller
-
-Required properties:
-- compatible		  : Must be one of the following, depending on the model:
-			    "silead,gsl1680"
-			    "silead,gsl1688"
-			    "silead,gsl3670"
-			    "silead,gsl3675"
-			    "silead,gsl3692"
-- reg			  : I2C slave address of the chip (0x40)
-- interrupts		  : interrupt specification for the gsl1680 interrupt
-- power-gpios		  : Specification for the pin connected to the gsl1680's
-			    shutdown input. This needs to be driven high to take the
-			    gsl1680 out of its low power state
-- touchscreen-size-x	  : See touchscreen.txt
-- touchscreen-size-y	  : See touchscreen.txt
-
-Optional properties:
-- firmware-name		  : File basename (string) for board specific firmware
-- touchscreen-inverted-x  : See touchscreen.txt
-- touchscreen-inverted-y  : See touchscreen.txt
-- touchscreen-swapped-x-y : See touchscreen.txt
-- silead,max-fingers	  : maximum number of fingers the touchscreen can detect
-- silead,home-button	  : Boolean, set to true on devices which have a
-			    capacitive home-button build into the touchscreen
-- vddio-supply		  : regulator phandle for controller VDDIO
-- avdd-supply		  : regulator phandle for controller AVDD
-
-Example:
-
-i2c@00000000 {
-	gsl1680: touchscreen@40 {
-		compatible = "silead,gsl1680";
-		reg = <0x40>;
-		interrupt-parent = <&pio>;
-		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
-		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <800>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-		silead,max-fingers = <5>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
new file mode 100644
index 000000000000..1d8ca19fd37a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/sitronix,st1232.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix st1232 or st1633 touchscreen controller
+
+maintainers:
+  - Bastian Hecht <hechtb@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sitronix,st1232
+      - sitronix,st1633
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpios:
+    description: A phandle to the reset GPIO
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            touchscreen@55 {
+                    compatible = "sitronix,st1232";
+                    reg = <0x55>;
+                    interrupts = <2 0>;
+                    gpios = <&gpio1 166 0>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
deleted file mode 100644
index 019373253b28..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Sitronix st1232 or st1633 touchscreen controller
-
-Required properties:
-- compatible: must contain one of
-  * "sitronix,st1232"
-  * "sitronix,st1633"
-- reg: I2C address of the chip
-- interrupts: interrupt to which the chip is connected
-
-Optional properties:
-- gpios: a phandle to the reset GPIO
-
-For additional optional properties see: touchscreen.txt
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		touchscreen@55 {
-			compatible = "sitronix,st1232";
-			reg = <0x55>;
-			interrupts = <2 0>;
-			gpios = <&gpio1 166 0>;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
index c549924603d2..238b51555c04 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
@@ -54,8 +54,7 @@ Optional properties common with MFD (deprecated):
 				1 -> 3.25 MHz
 				2 || 3 -> 6.5 MHz
 
-Node name must be stmpe_touchscreen and should be child node of stmpe node to
-which it belongs.
+Node should be child node of stmpe node to which it belongs.
 
 Note that common ADC settings of stmpe_touchscreen (child) will take precedence
 over the settings done in MFD.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
new file mode 100644
index 000000000000..e44cc65abc8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,am3359-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 Touchscreen controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    const: ti,am3359-tsc
+
+  ti,wires:
+    description: Wires refer to application modes i.e. 4/5/8 wire touchscreen
+      support on the platform.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [4, 5, 8]
+
+  ti,x-plate-resistance:
+    description: X plate resistance
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,coordinate-readouts:
+    description: The sequencer supports a total of 16 programmable steps. Each
+      step is used to read a single coordinate. A single readout is enough but
+      multiple reads can increase the quality. A value of 5 means, 5 reads for
+      X, 5 for Y and 2 for Z (always). This utilises 12 of the 16 software steps
+      available. The remaining 4 can be used by the ADC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 6
+
+  ti,wire-config:
+    description: Different boards could have a different order for connecting
+      wires on touchscreen. We need to provide an 8-bit number where the
+      first four bits represent the analog lines and the next 4 bits represent
+      positive/negative terminal on that input line. Notations to represent the
+      input lines and terminals respectively are as follows, AIN0 = 0, AIN1 = 1
+      and so on until AIN7 = 7. XP = 0, XN = 1, YP = 2, YN = 3.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 8
+
+  ti,charge-delay:
+    description: Length of touch screen charge delay step in terms of ADC clock
+      cycles. Charge delay value should be large in order to avoid false pen-up
+      events. This value effects the overall sampling speed, hence need to be
+      kept as low as possible, while avoiding false pen-up event. Start from a
+      lower value, say 0x400, and increase value until false pen-up events are
+      avoided. The pen-up detection happens immediately after the charge step,
+      so this does in fact function as a hardware knob for adjusting the amount
+      of "settling time".
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - ti,wires
+  - ti,x-plate-resistance
+  - ti,coordinate-readouts
+  - ti,wire-config
+
+additionalProperties: false
+
+examples:
+  - |
+    tsc {
+        compatible = "ti,am3359-tsc";
+        ti,wires = <4>;
+        ti,x-plate-resistance = <200>;
+        ti,coordinate-readouts = <5>;
+        ti,wire-config = <0x00 0x11 0x22 0x33>;
+        ti,charge-delay = <0x400>;
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
new file mode 100644
index 000000000000..938aab016cc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TSC2004 and TSC2005 touchscreen controller bindings
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+  - Michael Welling <mwelling@ieee.org>
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    enum:
+      - ti,tsc2004
+      - ti,tsc2005
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C address when used on the I2C bus, or the SPI chip select index
+      when used on the SPI bus
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO specifier for the controller reset line
+
+  spi-max-frequency:
+    description: TSC2005 SPI bus clock frequency.
+    maximum: 25000000
+
+  ti,x-plate-ohms:
+    description: resistance of the touchscreen's X plates in ohm (defaults to 280)
+
+  ti,esd-recovery-timeout-ms:
+    description: |
+        if the touchscreen does not respond after the configured time
+        (in milli seconds), the driver will reset it. This is disabled
+        by default.
+
+  vio-supply:
+    description: Regulator specifier
+
+  touchscreen-fuzz-pressure: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-max-pressure: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,tsc2004
+    then:
+      properties:
+        spi-max-frequency: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        touchscreen@48 {
+            compatible = "ti,tsc2004";
+            reg = <0x48>;
+            vio-supply = <&vio>;
+
+            reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+            interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
+
+            touchscreen-fuzz-x = <4>;
+            touchscreen-fuzz-y = <7>;
+            touchscreen-fuzz-pressure = <2>;
+            touchscreen-size-x = <4096>;
+            touchscreen-size-y = <4096>;
+            touchscreen-max-pressure = <2048>;
+
+            ti,x-plate-ohms = <280>;
+            ti,esd-recovery-timeout-ms = <8000>;
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        touchscreen@0 {
+            compatible = "ti,tsc2005";
+            spi-max-frequency = <6000000>;
+            reg = <0>;
+
+            vio-supply = <&vio>;
+
+            reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+            interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+            touchscreen-fuzz-x = <4>;
+            touchscreen-fuzz-y = <7>;
+            touchscreen-fuzz-pressure = <2>;
+            touchscreen-size-x = <4096>;
+            touchscreen-size-y = <4096>;
+            touchscreen-max-pressure = <2048>;
+
+            ti,x-plate-ohms = <280>;
+            ti,esd-recovery-timeout-ms = <8000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
deleted file mode 100644
index aad5e34965eb..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-* TI - TSC ADC (Touschscreen and analog digital converter)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Required properties:
-- mfd
-	compatible: Should be
-		"ti,am3359-tscadc" for AM335x/AM437x SoCs
-		"ti,am654-tscadc", "ti,am3359-tscadc" for AM654 SoCs
-- child "tsc"
-	compatible: Should be "ti,am3359-tsc".
-	ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
-		  support on the platform.
-	ti,x-plate-resistance: X plate resistance
-	ti,coordinate-readouts: The sequencer supports a total of 16
-				programmable steps each step is used to
-				read a single coordinate. A single
-                                readout is enough but multiple reads can
-				increase the quality.
-				A value of 5 means, 5 reads for X, 5 for
-				Y and 2 for Z (always). This utilises 12
-				of the 16 software steps available. The
-				remaining 4 can be used by the ADC.
-	ti,wire-config: Different boards could have a different order for
-			connecting wires on touchscreen. We need to provide an
-			8 bit number where in the 1st four bits represent the
-			analog lines and the next 4 bits represent positive/
-			negative terminal on that input line. Notations to
-			represent the input lines and terminals resoectively
-			is as follows:
-			AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
-			XP  = 0, XN = 1, YP = 2, YN = 3.
-- child "adc"
-	compatible: Should be
-		    "ti,am3359-adc" for AM335x/AM437x SoCs
-		    "ti,am654-adc", "ti,am3359-adc" for AM654 SoCs
-	ti,adc-channels: List of analog inputs available for ADC.
-			 AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
-
-Optional properties:
-- child "tsc"
-	ti,charge-delay: Length of touch screen charge delay step in terms of
-			 ADC clock cycles. Charge delay value should be large
-			 in order to avoid false pen-up events. This value
-			 effects the overall sampling speed, hence need to be
-			 kept as low as possible, while avoiding false pen-up
-			 event. Start from a lower value, say 0x400, and
-			 increase value until false pen-up events are avoided.
-			 The pen-up detection happens immediately after the
-			 charge step, so this does in fact function as a
-			 hardware knob for adjusting the amount of "settling
-			 time".
-
-- child "adc"
-	ti,chan-step-opendelay: List of open delays for each channel of
-				ADC in the order of ti,adc-channels. The
-				value corresponds to the number of ADC
-				clock cycles to wait after applying the
-				step configuration registers and before
-				sending the start of ADC conversion.
-				Maximum value is 0x3FFFF.
-       ti,chan-step-sampledelay: List of sample delays for each channel
-				  of ADC in the order of ti,adc-channels.
-				  The value corresponds to the number of
-				  ADC clock cycles to sample (to hold
-				  start of conversion high).
-				  Maximum value is 0xFF.
-       ti,chan-step-avg: Number of averages to be performed for each
-			  channel of ADC. If average is 16 then input
-			  is sampled 16 times and averaged to get more
-			  accurate value. This increases the time taken
-			  by ADC to generate a sample. Valid range is 0
-			  average to 16 averages. Maximum value is 16.
-
-Example:
-	tscadc: tscadc@44e0d000 {
-		compatible = "ti,am3359-tscadc";
-		tsc {
-			ti,wires = <4>;
-			ti,x-plate-resistance = <200>;
-			ti,coordiante-readouts = <5>;
-			ti,wire-config = <0x00 0x11 0x22 0x33>;
-			ti,charge-delay = <0x400>;
-		};
-
-		adc {
-			ti,adc-channels = <4 5 6 7>;
-			ti,chan-step-opendelay = <0x098 0x3ffff 0x098 0x0>;
-			ti,chan-step-sampledelay = <0xff 0x0 0xf 0x0>;
-			ti,chan-step-avg = <16 2 4 8>;
-		};
-	}
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
index d7dac16a3960..4b5b212c772c 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
@@ -33,8 +33,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-min-pressure:
-    description: minimum pressure on the touchscreen to be achieved in order for the
-                 touchscreen driver to report a touch event.
+    description: minimum pressure on the touchscreen to be achieved in order
+      for the touchscreen driver to report a touch event.
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-fuzz-x:
@@ -46,13 +46,13 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-fuzz-pressure:
-    description: pressure noise value of the absolute input device (arbitrary range
-                 dependent on the controller)
+    description: pressure noise value of the absolute input device (arbitrary
+      range dependent on the controller)
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-average-samples:
-    description: Number of data samples which are averaged for each read (valid values
-                 dependent on the controller)
+    description: Number of data samples which are averaged for each read (valid
+      values dependent on the controller)
     $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-inverted-x:
@@ -70,14 +70,20 @@ properties:
 
   touchscreen-x-mm:
     description: horizontal length in mm of the touchscreen
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-y-mm:
     description: vertical length in mm of the touchscreen
-    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-x-plate-ohms:
+    description: Resistance of the X-plate in Ohms
+
+  touchscreen-y-plate-ohms:
+    description: Resistance of the Y-plate in Ohms
 
 dependencies:
   touchscreen-size-x: [ touchscreen-size-y ]
   touchscreen-size-y: [ touchscreen-size-x ]
   touchscreen-x-mm: [ touchscreen-y-mm ]
   touchscreen-y-mm: [ touchscreen-x-mm ]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
deleted file mode 100644
index b80c04b0e5c0..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Texas Instruments tsc2004 and tsc2005 touchscreen controllers
-
-Required properties:
- - compatible		      : "ti,tsc2004" or "ti,tsc2005"
- - reg			      : Device address
- - interrupts		      : IRQ specifier
- - spi-max-frequency	      : Maximum SPI clocking speed of the device
-			        (for tsc2005)
-
-Optional properties:
- - vio-supply		      : Regulator specifier
- - reset-gpios		      : GPIO specifier for the controller reset line
- - ti,x-plate-ohms	      : integer, resistance of the touchscreen's X plates
-				in ohm (defaults to 280)
- - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after
-				the configured time (in milli seconds), the driver
-				will reset it. This is disabled by default.
- - properties defined in touchscreen.txt
-
-Example:
-
-&i2c3 {
-	tsc2004@48 {
-		compatible = "ti,tsc2004";
-		reg = <0x48>;
-		vio-supply = <&vio>;
-
-		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
-		interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
-
-		touchscreen-fuzz-x = <4>;
-		touchscreen-fuzz-y = <7>;
-		touchscreen-fuzz-pressure = <2>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-		touchscreen-max-pressure = <2048>;
-
-		ti,x-plate-ohms = <280>;
-		ti,esd-recovery-timeout-ms = <8000>;
-	};
-}
-
-&mcspi1 {
-	tsc2005@0 {
-		compatible = "ti,tsc2005";
-		spi-max-frequency = <6000000>;
-		reg = <0>;
-
-		vio-supply = <&vio>;
-
-		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
-		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
-
-		touchscreen-fuzz-x = <4>;
-		touchscreen-fuzz-y = <7>;
-		touchscreen-fuzz-pressure = <2>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-		touchscreen-max-pressure = <2048>;
-
-		ti,x-plate-ohms = <280>;
-		ti,esd-recovery-timeout-ms = <8000>;
-	};
-}
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
new file mode 100644
index 000000000000..b4e5ba7c0b49
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/zinitix,bt400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zinitix BT4xx and BT5xx series touchscreen controller bindings
+
+description: The Zinitix BT4xx and BT5xx series of touchscreen controllers
+  are Korea-produced touchscreens with embedded microcontrollers. The
+  BT4xx series was produced 2010-2013 and the BT5xx series 2013-2014.
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    enum:
+      - zinitix,bt402
+      - zinitix,bt403
+      - zinitix,bt404
+      - zinitix,bt412
+      - zinitix,bt413
+      - zinitix,bt431
+      - zinitix,bt432
+      - zinitix,bt531
+      - zinitix,bt532
+      - zinitix,bt538
+      - zinitix,bt541
+      - zinitix,bt548
+      - zinitix,bt554
+      - zinitix,at100
+
+  reg:
+    description: I2C address on the I2C bus
+
+  clock-frequency:
+    description: I2C client clock frequency, defined for host when using
+      the device on the I2C bus
+    minimum: 0
+    maximum: 400000
+
+  interrupts:
+    description: Interrupt to host
+    maxItems: 1
+
+  vcca-supply:
+    description: Analog power supply regulator on the VCCA pin
+
+  vdd-supply:
+    description: Digital power supply regulator on the VDD pin.
+      In older device trees this can be the accidental name for the analog
+      supply on the VCCA pin, and in that case the deprecated vddo-supply is
+      used for the digital power supply.
+
+  vddo-supply:
+    description: Deprecated name for the digital power supply, use vdd-supply
+      as this reflects the real name of the pin. If this supply is present,
+      the vdd-supply represents VCCA instead of VDD. Implementers should first
+      check for this property, and if it is present assume that the vdd-supply
+      represents the analog supply.
+    deprecated: true
+
+  reset-gpios:
+    description: Reset line for the touchscreen, should be tagged
+      as GPIO_ACTIVE_LOW
+
+  zinitix,mode:
+    description: Mode of reporting touch points. Some modes may not work
+      with a particular ts firmware for unknown reasons. Available modes are
+      1 and 2. Mode 2 is the default and preferred.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@20 {
+        compatible = "zinitix,bt541";
+        reg = <0x20>;
+        interrupt-parent = <&gpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        vcca-supply = <&reg_vcca_tsp>;
+        vdd-supply = <&reg_vdd_tsp>;
+        touchscreen-size-x = <540>;
+        touchscreen-size-y = <960>;
+        zinitix,mode = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
new file mode 100644
index 000000000000..f7a5e31c506e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/fsl,imx8m-noc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic i.MX bus frequency device
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  The i.MX SoC family has multiple buses for which clock frequency (and
+  sometimes voltage) can be adjusted.
+
+  Some of those buses expose register areas mentioned in the memory maps as GPV
+  ("Global Programmers View") but not all. Access to this area might be denied
+  for normal (non-secure) world.
+
+  The buses are based on externally licensed IPs such as ARM NIC-301 and
+  Arteris FlexNOC but DT bindings are specific to the integration of these bus
+  interconnect IPs into imx SOCs.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx8mm-nic
+              - fsl,imx8mn-nic
+              - fsl,imx8mp-nic
+              - fsl,imx8mq-nic
+          - const: fsl,imx8m-nic
+      - items:
+          - enum:
+              - fsl,imx8mm-noc
+              - fsl,imx8mn-noc
+              - fsl,imx8mp-noc
+              - fsl,imx8mq-noc
+          - const: fsl,imx8m-noc
+      - const: fsl,imx8m-nic
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  fsl,ddrc:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description:
+      Phandle to DDR Controller.
+
+  '#interconnect-cells':
+    description:
+      If specified then also act as an interconnect provider. Should only be
+      set once per soc on the main noc.
+    const: 1
+
+required:
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/interconnect/imx8mm.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    noc: interconnect@32700000 {
+        compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
+        reg = <0x32700000 0x100000>;
+        clocks = <&clk IMX8MM_CLK_NOC>;
+        #interconnect-cells = <1>;
+        fsl,ddrc = <&ddrc>;
+
+        operating-points-v2 = <&noc_opp_table>;
+        noc_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-133333333 {
+                opp-hz = /bits/ 64 <133333333>;
+            };
+            opp-800000000 {
+                opp-hz = /bits/ 64 <800000000>;
+            };
+        };
+    };
+
+    ddrc: memory-controller@3d400000 {
+        compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+        reg = <0x3d400000 0x400000>;
+        clock-names = "core", "pll", "alt", "apb";
+        clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+                 <&clk IMX8MM_DRAM_PLL>,
+                 <&clk IMX8MM_CLK_DRAM_ALT>,
+                 <&clk IMX8MM_CLK_DRAM_APB>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt
index 6f5d23a605b7..138c544c8c8c 100644
--- a/Documentation/devicetree/bindings/interconnect/interconnect.txt
+++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt
@@ -19,7 +19,8 @@ directly.
 Required properties:
 - compatible : contains the interconnect provider compatible string
 - #interconnect-cells : number of cells in a interconnect specifier needed to
-			encode the interconnect node id
+			encode the interconnect node id and optionally add a
+			path tag
 
 Example:
 
@@ -44,6 +45,10 @@ components it has to interact with.
 Required properties:
 interconnects : Pairs of phandles and interconnect provider specifier to denote
 	        the edge source and destination ports of the interconnect path.
+		An optional path tag value could specified as additional argument
+		to both endpoints and in such cases, this information will be passed
+		to the interconnect framework to do aggregation based on the attached
+		tag.
 
 Optional properties:
 interconnect-names : List of interconnect path name strings sorted in the same
@@ -62,3 +67,20 @@ Example:
 		interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>;
 		interconnect-names = "sdhc-mem";
 	};
+
+Example with path tags:
+
+	gnoc: interconnect@17900000 {
+		...
+		interconnect-cells = <2>;
+	};
+
+	mnoc: interconnect@1380000 {
+		...
+		interconnect-cells = <2>;
+	};
+
+	cpu@0 {
+		...
+		interconnects = <&gnoc MASTER_APPSS_PROC 3 &mnoc SLAVE_EBI1 3>;
+	}
diff --git a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
new file mode 100644
index 000000000000..58611ba2a0f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/mediatek,cci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Cache Coherent Interconnect (CCI) frequency and voltage scaling
+
+maintainers:
+  - Jia-Wei Chang <jia-wei.chang@mediatek.com>
+  - Johnson Wang <johnson.wang@mediatek.com>
+
+description: |
+  MediaTek Cache Coherent Interconnect (CCI) is a hardware engine used by
+  MT8183 and MT8186 SoCs to scale the frequency and adjust the voltage in
+  hardware. It can also optimize the voltage to reduce the power consumption.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-cci
+      - mediatek,mt8186-cci
+
+  clocks:
+    items:
+      - description:
+          The multiplexer for clock input of the bus.
+      - description:
+          A parent of "bus" clock which is used as an intermediate clock source
+          when the original clock source (PLL) is under transition and not
+          stable yet.
+
+  clock-names:
+    items:
+      - const: cci
+      - const: intermediate
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  proc-supply:
+    description:
+      Phandle of the regulator for CCI that provides the supply voltage.
+
+  sram-supply:
+    description:
+      Phandle of the regulator for sram of CCI that provides the supply
+      voltage. When it is present, the implementation needs to do
+      "voltage tracking" to step by step scale up/down Vproc and Vsram to fit
+      SoC specific needs. When absent, the voltage scaling flow is handled by
+      hardware, hence no software "voltage tracking" is needed.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - operating-points-v2
+  - proc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    cci: cci {
+        compatible = "mediatek,mt8183-cci";
+        clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+                 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+        clock-names = "cci", "intermediate";
+        operating-points-v2 = <&cci_opp>;
+        proc-supply = <&mt6358_vproc12_reg>;
+    };
+
+    cci_opp: opp-table-cci {
+        compatible = "operating-points-v2";
+        opp-shared;
+        opp2_00: opp-273000000 {
+            opp-hz = /bits/ 64 <273000000>;
+            opp-microvolt = <650000>;
+        };
+        opp2_01: opp-338000000 {
+            opp-hz = /bits/ 64 <338000000>;
+            opp-microvolt = <687500>;
+        };
+        opp2_02: opp-403000000 {
+            opp-hz = /bits/ 64 <403000000>;
+            opp-microvolt = <718750>;
+        };
+        opp2_03: opp-463000000 {
+            opp-hz = /bits/ 64 <463000000>;
+            opp-microvolt = <756250>;
+        };
+        opp2_04: opp-546000000 {
+            opp-hz = /bits/ 64 <546000000>;
+            opp-microvolt = <800000>;
+        };
+        opp2_05: opp-624000000 {
+            opp-hz = /bits/ 64 <624000000>;
+            opp-microvolt = <818750>;
+        };
+        opp2_06: opp-689000000 {
+            opp-hz = /bits/ 64 <689000000>;
+            opp-microvolt = <850000>;
+        };
+        opp2_07: opp-767000000 {
+            opp-hz = /bits/ 64 <767000000>;
+            opp-microvolt = <868750>;
+        };
+        opp2_08: opp-845000000 {
+            opp-hz = /bits/ 64 <845000000>;
+            opp-microvolt = <893750>;
+        };
+        opp2_09: opp-871000000 {
+            opp-hz = /bits/ 64 <871000000>;
+            opp-microvolt = <906250>;
+        };
+        opp2_10: opp-923000000 {
+            opp-hz = /bits/ 64 <923000000>;
+            opp-microvolt = <931250>;
+        };
+        opp2_11: opp-962000000 {
+            opp-hz = /bits/ 64 <962000000>;
+            opp-microvolt = <943750>;
+        };
+        opp2_12: opp-1027000000 {
+            opp-hz = /bits/ 64 <1027000000>;
+            opp-microvolt = <975000>;
+        };
+        opp2_13: opp-1092000000 {
+            opp-hz = /bits/ 64 <1092000000>;
+            opp-microvolt = <1000000>;
+        };
+        opp2_14: opp-1144000000 {
+            opp-hz = /bits/ 64 <1144000000>;
+            opp-microvolt = <1025000>;
+        };
+        opp2_15: opp-1196000000 {
+            opp-hz = /bits/ 64 <1196000000>;
+            opp-microvolt = <1050000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
new file mode 100644
index 000000000000..eec987640b37
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,bcm-voter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm BCM-Voter Interconnect
+
+maintainers:
+  - Georgi Djakov <georgi.djakov@linaro.org>
+
+description: |
+  The Bus Clock Manager (BCM) is a dedicated hardware accelerator that manages
+  shared system resources by aggregating requests from multiple Resource State
+  Coordinators (RSC). Interconnect providers are able to vote for aggregated
+  thresholds values from consumers by communicating through their respective
+  RSCs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,bcm-voter
+
+  qcom,tcs-wait:
+    description: |
+      Optional mask of which TCSs (Triggered Command Sets) wait for completion
+      upon triggering. If not specified, then the AMC and WAKE sets wait for
+      completion. The mask bits are available in the QCOM_ICC_TAG_* defines.
+
+      The AMC TCS is triggered immediately when icc_set_bw() is called. The
+      WAKE/SLEEP TCSs are triggered when the RSC transitions between active and
+      sleep modes.
+
+      In most cases, it's necessary to wait in both the AMC and WAKE sets to
+      ensure resources are available before use. If a specific RSC and its use
+      cases can ensure sufficient delay by other means, then this can be
+      overridden to reduce latencies.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Example 1: apps bcm_voter on SDM845 SoC should be defined inside &apps_rsc node
+  # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
+  - |
+
+    apps_bcm_voter: bcm-voter {
+        compatible = "qcom,bcm-voter";
+    };
+
+  # Example 2: disp bcm_voter on SDM845 should be defined inside &disp_rsc node
+  # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
+  - |
+
+    #include <dt-bindings/interconnect/qcom,icc.h>
+
+    disp_bcm_voter: bcm-voter {
+        compatible = "qcom,bcm-voter";
+        qcom,tcs-wait = <QCOM_ICC_TAG_AMC>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
deleted file mode 100644
index 4107e60cab12..000000000000
--- a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
+++ /dev/null
@@ -1,77 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/interconnect/qcom,msm8916.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm MSM8916 Network-On-Chip interconnect
-
-maintainers:
-  - Georgi Djakov <georgi.djakov@linaro.org>
-
-description: |
-   The Qualcomm MSM8916 interconnect providers support adjusting the
-   bandwidth requirements between the various NoC fabrics.
-
-properties:
-  compatible:
-    enum:
-      - qcom,msm8916-bimc
-      - qcom,msm8916-pcnoc
-      - qcom,msm8916-snoc
-
-  reg:
-    maxItems: 1
-
-  '#interconnect-cells':
-    const: 1
-
-  clock-names:
-    items:
-      - const: bus
-      - const: bus_a
-
-  clocks:
-    items:
-      - description: Bus Clock
-      - description: Bus A Clock
-
-required:
-  - compatible
-  - reg
-  - '#interconnect-cells'
-  - clock-names
-  - clocks
-
-additionalProperties: false
-
-examples:
-  - |
-      #include <dt-bindings/clock/qcom,rpmcc.h>
-
-      bimc: interconnect@400000 {
-              compatible = "qcom,msm8916-bimc";
-              reg = <0x00400000 0x62000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
-      };
-
-      pcnoc: interconnect@500000 {
-              compatible = "qcom,msm8916-pcnoc";
-              reg = <0x00500000 0x11000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-                       <&rpmcc RPM_SMD_PCNOC_A_CLK>;
-      };
-
-      snoc: interconnect@580000 {
-              compatible = "qcom,msm8916-snoc";
-              reg = <0x00580000 0x14000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-                       <&rpmcc RPM_SMD_SNOC_A_CLK>;
-      };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
index 9af3c6e59cff..8004c4baf397 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
@@ -10,8 +10,8 @@ maintainers:
   - Brian Masney <masneyb@onstation.org>
 
 description: |
-   The Qualcomm MSM8974 interconnect providers support setting system
-   bandwidth requirements between various network-on-chip fabrics.
+  The Qualcomm MSM8974 interconnect providers support setting system
+  bandwidth requirements between various network-on-chip fabrics.
 
 properties:
   reg:
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
new file mode 100644
index 000000000000..2684562df4d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8998-bwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Interconnect Bandwidth Monitor
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  Bandwidth Monitor measures current throughput on buses between various NoC
+  fabrics and provides information when it crosses configured thresholds.
+
+  Certain SoCs might have more than one Bandwidth Monitors, for example on SDM845::
+   - Measuring the bandwidth between CPUs and Last Level Cache Controller -
+     called just BWMON,
+   - Measuring the bandwidth between Last Level Cache Controller and memory
+     (DDR) - called LLCC BWMON.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sc7280-bwmon
+              - qcom,sdm845-bwmon
+          - const: qcom,msm8998-bwmon
+      - const: qcom,msm8998-bwmon       # BWMON v4
+      - const: qcom,sc7280-llcc-bwmon   # BWMON v5
+      - const: qcom,sdm845-llcc-bwmon   # BWMON v5
+
+  interconnects:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  reg:
+    # BWMON v4 (currently described) and BWMON v5 use one register address
+    # space.  BWMON v2 uses two register spaces - not yet described.
+    maxItems: 1
+
+required:
+  - compatible
+  - interconnects
+  - interrupts
+  - operating-points-v2
+  - opp-table
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmu@1436400 {
+        compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon";
+        reg = <0x01436400 0x600>;
+        interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+        interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
+
+        operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+        cpu_bwmon_opp_table: opp-table {
+            compatible = "operating-points-v2";
+            opp-0 {
+                opp-peak-kBps = <4800000>;
+            };
+            opp-1 {
+                opp-peak-kBps = <9216000>;
+            };
+            opp-2 {
+                opp-peak-kBps = <15052800>;
+            };
+            opp-3 {
+                opp-peak-kBps = <20889600>;
+            };
+            opp-4 {
+                opp-peak-kBps = <25497600>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
new file mode 100644
index 000000000000..bf538c0c5a81
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,osm-l3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Operating State Manager (OSM) L3 Interconnect Provider
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  L3 cache bandwidth requirements on Qualcomm SoCs is serviced by the OSM.
+  The OSM L3 interconnect provider aggregates the L3 bandwidth requests
+  from CPU/GPU and relays it to the OSM.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-osm-l3
+      - qcom,sc7280-epss-l3
+      - qcom,sc8180x-osm-l3
+      - qcom,sdm845-osm-l3
+      - qcom,sm8150-osm-l3
+      - qcom,sm8250-epss-l3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: xo clock
+      - description: alternate clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: alternate
+
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#interconnect-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #define GPLL0               165
+    #define RPMH_CXO_CLK        0
+
+    osm_l3: interconnect@17d41000 {
+      compatible = "qcom,sdm845-osm-l3";
+      reg = <0x17d41000 0x1400>;
+
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+      clock-names = "xo", "alternate";
+
+      #interconnect-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
new file mode 100644
index 000000000000..f65a2fe846de
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qcm2290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM2290 Network-On-Chip interconnect
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Qualcomm QCM2290 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,qcm2290-bimc
+      - qcom,qcm2290-cnoc
+      - qcom,qcm2290-snoc
+
+  '#interconnect-cells':
+    const: 1
+
+  clock-names:
+    items:
+      - const: bus
+      - const: bus_a
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Bus A Clock
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[a-z0-9]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,qcm2290-qup-virt
+          - qcom,qcm2290-mmrt-virt
+          - qcom,qcm2290-mmnrt-virt
+
+      '#interconnect-cells':
+        const: 1
+
+      clock-names:
+        items:
+          - const: bus
+          - const: bus_a
+
+      clocks:
+        items:
+          - description: Bus Clock
+          - description: Bus A Clock
+
+    required:
+      - compatible
+      - '#interconnect-cells'
+      - clock-names
+      - clocks
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    snoc: interconnect@1880000 {
+        compatible = "qcom,qcm2290-snoc";
+        reg = <0x01880000 0x60200>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+                 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+
+        qup_virt: interconnect-qup {
+            compatible = "qcom,qcm2290-qup-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_QUP_CLK>,
+                     <&rpmcc RPM_SMD_QUP_A_CLK>;
+        };
+
+        mmnrt_virt: interconnect-mmnrt {
+            compatible = "qcom,qcm2290-mmnrt-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_MMNRT_CLK>,
+                     <&rpmcc RPM_SMD_MMNRT_A_CLK>;
+        };
+
+        mmrt_virt: interconnect-mmrt {
+            compatible = "qcom,qcm2290-mmrt-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_MMRT_CLK>,
+                     <&rpmcc RPM_SMD_MMRT_A_CLK>;
+        };
+    };
+
+    cnoc: interconnect@1900000 {
+        compatible = "qcom,qcm2290-cnoc";
+        reg = <0x01900000 0x8200>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+                 <&rpmcc RPM_SMD_CNOC_A_CLK>;
+    };
+
+    bimc: interconnect@4480000 {
+        compatible = "qcom,qcm2290-bimc";
+        reg = <0x04480000 0x80000>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+                 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
deleted file mode 100644
index 8d65c5f80679..000000000000
--- a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
+++ /dev/null
@@ -1,77 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/interconnect/qcom,qcs404.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm QCS404 Network-On-Chip interconnect
-
-maintainers:
-  - Georgi Djakov <georgi.djakov@linaro.org>
-
-description: |
-   The Qualcomm QCS404 interconnect providers support adjusting the
-   bandwidth requirements between the various NoC fabrics.
-
-properties:
-  reg:
-    maxItems: 1
-
-  compatible:
-    enum:
-      - qcom,qcs404-bimc
-      - qcom,qcs404-pcnoc
-      - qcom,qcs404-snoc
-
-  '#interconnect-cells':
-    const: 1
-
-  clock-names:
-    items:
-      - const: bus
-      - const: bus_a
-
-  clocks:
-    items:
-      - description: Bus Clock
-      - description: Bus A Clock
-
-required:
-  - compatible
-  - reg
-  - '#interconnect-cells'
-  - clock-names
-  - clocks
-
-additionalProperties: false
-
-examples:
-  - |
-      #include <dt-bindings/clock/qcom,rpmcc.h>
-
-      bimc: interconnect@400000 {
-              reg = <0x00400000 0x80000>;
-              compatible = "qcom,qcs404-bimc";
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
-      };
-
-      pnoc: interconnect@500000 {
-             reg = <0x00500000 0x15080>;
-             compatible = "qcom,qcs404-pcnoc";
-             #interconnect-cells = <1>;
-             clock-names = "bus", "bus_a";
-             clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-                      <&rpmcc RPM_SMD_PNOC_A_CLK>;
-      };
-
-      snoc: interconnect@580000 {
-            reg = <0x00580000 0x23080>;
-            compatible = "qcom,qcs404-snoc";
-            #interconnect-cells = <1>;
-            clock-names = "bus", "bus_a";
-            clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-                     <&rpmcc RPM_SMD_SNOC_A_CLK>;
-      };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
new file mode 100644
index 000000000000..4b37aa88a375
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@@ -0,0 +1,247 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,rpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM Network-On-Chip Interconnect
+
+maintainers:
+  - Georgi Djakov <georgi.djakov@linaro.org>
+
+description: |
+  RPM interconnect providers support system bandwidth requirements through
+  RPM processor. The provider is able to communicate with the RPM through
+  the RPM shared memory device.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,msm8916-bimc
+      - qcom,msm8916-pcnoc
+      - qcom,msm8916-snoc
+      - qcom,msm8939-bimc
+      - qcom,msm8939-pcnoc
+      - qcom,msm8939-snoc
+      - qcom,msm8996-a0noc
+      - qcom,msm8996-a1noc
+      - qcom,msm8996-a2noc
+      - qcom,msm8996-bimc
+      - qcom,msm8996-cnoc
+      - qcom,msm8996-mnoc
+      - qcom,msm8996-pnoc
+      - qcom,msm8996-snoc
+      - qcom,qcs404-bimc
+      - qcom,qcs404-pcnoc
+      - qcom,qcs404-snoc
+      - qcom,sdm660-a2noc
+      - qcom,sdm660-bimc
+      - qcom,sdm660-cnoc
+      - qcom,sdm660-gnoc
+      - qcom,sdm660-mnoc
+      - qcom,sdm660-snoc
+
+  '#interconnect-cells':
+    description: |
+      Value: <1> is one cell in an interconnect specifier for the
+      interconnect node id, <2> requires the interconnect node id and an
+      extra path tag.
+    enum: [ 1, 2 ]
+
+  clocks:
+    minItems: 2
+    maxItems: 7
+
+  clock-names:
+    minItems: 2
+    maxItems: 7
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8916-bimc
+              - qcom,msm8916-pcnoc
+              - qcom,msm8916-snoc
+              - qcom,msm8939-bimc
+              - qcom,msm8939-pcnoc
+              - qcom,msm8939-snoc
+              - qcom,msm8996-a1noc
+              - qcom,msm8996-a2noc
+              - qcom,msm8996-bimc
+              - qcom,msm8996-cnoc
+              - qcom,msm8996-pnoc
+              - qcom,msm8996-snoc
+              - qcom,qcs404-bimc
+              - qcom,qcs404-pcnoc
+              - qcom,qcs404-snoc
+              - qcom,sdm660-bimc
+              - qcom,sdm660-cnoc
+              - qcom,sdm660-gnoc
+              - qcom,sdm660-snoc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+
+        clocks:
+          items:
+            - description: Bus Clock
+            - description: Bus A Clock
+
+      # Child node's properties
+      patternProperties:
+        '^interconnect-[a-z0-9]+$':
+          type: object
+          description:
+            snoc-mm is a child of snoc, sharing snoc's register address space.
+
+          properties:
+            compatible:
+              enum:
+                - qcom,msm8939-snoc-mm
+
+            '#interconnect-cells':
+              const: 1
+
+            clock-names:
+              items:
+                - const: bus
+                - const: bus_a
+
+            clocks:
+              items:
+                - description: Bus Clock
+                - description: Bus A Clock
+
+          required:
+            - compatible
+            - '#interconnect-cells'
+            - clock-names
+            - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-mnoc
+              - qcom,sdm660-mnoc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: iface
+
+        clocks:
+          items:
+            - description: Bus Clock.
+            - description: Bus A Clock.
+            - description: CPU-NoC High-performance Bus Clock.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-a0noc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: aggre0_snoc_axi
+            - const: aggre0_cnoc_ahb
+            - const: aggre0_noc_mpu_cfg
+
+        clocks:
+          items:
+            - description: Aggregate0 System NoC AXI Clock.
+            - description: Aggregate0 Config NoC AHB Clock.
+            - description: Aggregate0 NoC MPU Clock.
+
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-a2noc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: ipa
+            - const: ufs_axi
+            - const: aggre2_ufs_axi
+            - const: aggre2_usb3_axi
+            - const: cfg_noc_usb2_axi
+
+        clocks:
+          items:
+            - description: Bus Clock.
+            - description: Bus A Clock.
+            - description: IPA Clock.
+            - description: UFS AXI Clock.
+            - description: Aggregate2 UFS AXI Clock.
+            - description: Aggregate2 USB3 AXI Clock.
+            - description: Config NoC USB2 AXI Clock.
+
+examples:
+  - |
+      #include <dt-bindings/clock/qcom,rpmcc.h>
+
+      bimc: interconnect@400000 {
+              compatible = "qcom,msm8916-bimc";
+              reg = <0x00400000 0x62000>;
+              #interconnect-cells = <1>;
+              clock-names = "bus", "bus_a";
+              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
+      };
+
+      pcnoc: interconnect@500000 {
+              compatible = "qcom,msm8916-pcnoc";
+              reg = <0x00500000 0x11000>;
+              #interconnect-cells = <1>;
+              clock-names = "bus", "bus_a";
+              clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+                       <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+      };
+
+      snoc: interconnect@580000 {
+              compatible = "qcom,msm8916-snoc";
+              reg = <0x00580000 0x14000>;
+              #interconnect-cells = <1>;
+              clock-names = "bus", "bus_a";
+              clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+                       <&rpmcc RPM_SMD_SNOC_A_CLK>;
+      };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml
new file mode 100644
index 000000000000..bbeb0541536b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,rpmh-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Georgi Djakov <djakov@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+properties:
+  '#interconnect-cells':
+    enum: [ 1, 2 ]
+
+  qcom,bcm-voters:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    maxItems: 2
+    description:
+      List of phandles to qcom,bcm-voter nodes that are required by
+      this interconnect to send RPMh commands.
+
+  qcom,bcm-voter-names:
+    maxItems: 2
+    description:
+      Names for each of the qcom,bcm-voters specified.
+
+required:
+  - '#interconnect-cells'
+  - qcom,bcm-voters
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
new file mode 100644
index 000000000000..a429a1ed1006
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Georgi Djakov <georgi.djakov@linaro.org>
+  - Odelu Kukatla <okukatla@codeaurora.org>
+
+description: |
+   RPMh interconnect providers support system bandwidth requirements through
+   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+   able to communicate with the BCM through the Resource State Coordinator (RSC)
+   associated with each execution environment. Provider nodes must point to at
+   least one RPMh device child node pertaining to their RSC and each provider
+   can map to multiple RPMh resources.
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,sc7180-aggre1-noc
+      - qcom,sc7180-aggre2-noc
+      - qcom,sc7180-camnoc-virt
+      - qcom,sc7180-compute-noc
+      - qcom,sc7180-config-noc
+      - qcom,sc7180-dc-noc
+      - qcom,sc7180-gem-noc
+      - qcom,sc7180-mc-virt
+      - qcom,sc7180-mmss-noc
+      - qcom,sc7180-npu-noc
+      - qcom,sc7180-qup-virt
+      - qcom,sc7180-system-noc
+      - qcom,sc7280-aggre1-noc
+      - qcom,sc7280-aggre2-noc
+      - qcom,sc7280-clk-virt
+      - qcom,sc7280-cnoc2
+      - qcom,sc7280-cnoc3
+      - qcom,sc7280-dc-noc
+      - qcom,sc7280-gem-noc
+      - qcom,sc7280-lpass-ag-noc
+      - qcom,sc7280-mc-virt
+      - qcom,sc7280-mmss-noc
+      - qcom,sc7280-nsp-noc
+      - qcom,sc7280-system-noc
+      - qcom,sc8180x-aggre1-noc
+      - qcom,sc8180x-aggre2-noc
+      - qcom,sc8180x-camnoc-virt
+      - qcom,sc8180x-compute-noc
+      - qcom,sc8180x-config-noc
+      - qcom,sc8180x-dc-noc
+      - qcom,sc8180x-gem-noc
+      - qcom,sc8180x-ipa-virt
+      - qcom,sc8180x-mc-virt
+      - qcom,sc8180x-mmss-noc
+      - qcom,sc8180x-qup-virt
+      - qcom,sc8180x-system-noc
+      - qcom,sc8280xp-aggre1-noc
+      - qcom,sc8280xp-aggre2-noc
+      - qcom,sc8280xp-clk-virt
+      - qcom,sc8280xp-config-noc
+      - qcom,sc8280xp-dc-noc
+      - qcom,sc8280xp-gem-noc
+      - qcom,sc8280xp-lpass-ag-noc
+      - qcom,sc8280xp-mc-virt
+      - qcom,sc8280xp-mmss-noc
+      - qcom,sc8280xp-nspa-noc
+      - qcom,sc8280xp-nspb-noc
+      - qcom,sc8280xp-system-noc
+      - qcom,sdm845-aggre1-noc
+      - qcom,sdm845-aggre2-noc
+      - qcom,sdm845-config-noc
+      - qcom,sdm845-dc-noc
+      - qcom,sdm845-gladiator-noc
+      - qcom,sdm845-mem-noc
+      - qcom,sdm845-mmss-noc
+      - qcom,sdm845-system-noc
+      - qcom,sdx55-mc-virt
+      - qcom,sdx55-mem-noc
+      - qcom,sdx55-system-noc
+      - qcom,sdx65-mc-virt
+      - qcom,sdx65-mem-noc
+      - qcom,sdx65-system-noc
+      - qcom,sm8150-aggre1-noc
+      - qcom,sm8150-aggre2-noc
+      - qcom,sm8150-camnoc-noc
+      - qcom,sm8150-compute-noc
+      - qcom,sm8150-config-noc
+      - qcom,sm8150-dc-noc
+      - qcom,sm8150-gem-noc
+      - qcom,sm8150-ipa-virt
+      - qcom,sm8150-mc-virt
+      - qcom,sm8150-mmss-noc
+      - qcom,sm8150-system-noc
+      - qcom,sm8250-aggre1-noc
+      - qcom,sm8250-aggre2-noc
+      - qcom,sm8250-compute-noc
+      - qcom,sm8250-config-noc
+      - qcom,sm8250-dc-noc
+      - qcom,sm8250-gem-noc
+      - qcom,sm8250-ipa-virt
+      - qcom,sm8250-mc-virt
+      - qcom,sm8250-mmss-noc
+      - qcom,sm8250-npu-noc
+      - qcom,sm8250-system-noc
+      - qcom,sm8350-aggre1-noc
+      - qcom,sm8350-aggre2-noc
+      - qcom,sm8350-config-noc
+      - qcom,sm8350-dc-noc
+      - qcom,sm8350-gem-noc
+      - qcom,sm8350-lpass-ag-noc
+      - qcom,sm8350-mc-virt
+      - qcom,sm8350-mmss-noc
+      - qcom,sm8350-compute-noc
+      - qcom,sm8350-system-noc
+      - qcom,sm8450-aggre1-noc
+      - qcom,sm8450-aggre2-noc
+      - qcom,sm8450-clk-virt
+      - qcom,sm8450-config-noc
+      - qcom,sm8450-gem-noc
+      - qcom,sm8450-lpass-ag-noc
+      - qcom,sm8450-mc-virt
+      - qcom,sm8450-mmss-noc
+      - qcom,sm8450-nsp-noc
+      - qcom,sm8450-pcie-anoc
+      - qcom,sm8450-system-noc
+
+  '#interconnect-cells': true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+      mem_noc: interconnect@1380000 {
+             compatible = "qcom,sdm845-mem-noc";
+             reg = <0x01380000 0x27200>;
+             #interconnect-cells = <1>;
+             qcom,bcm-voters = <&apps_bcm_voter>;
+      };
+
+      mmss_noc: interconnect@1740000 {
+             compatible = "qcom,sdm845-mmss-noc";
+             reg = <0x01740000 0x1c1000>;
+             #interconnect-cells = <1>;
+             qcom,bcm-voter-names = "apps", "disp";
+             qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>;
+      };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt
deleted file mode 100644
index 5c4f1d911630..000000000000
--- a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Qualcomm SDM845 Network-On-Chip interconnect driver binding
------------------------------------------------------------
-
-SDM845 interconnect providers support system bandwidth requirements through
-RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
-able to communicate with the BCM through the Resource State Coordinator (RSC)
-associated with each execution environment. Provider nodes must reside within
-an RPMh device node pertaining to their RSC and each provider maps to a single
-RPMh resource.
-
-Required properties :
-- compatible : shall contain only one of the following:
-			"qcom,sdm845-rsc-hlos"
-- #interconnect-cells : should contain 1
-
-Examples:
-
-apps_rsc: rsc {
-	rsc_hlos: interconnect {
-		compatible = "qcom,sdm845-rsc-hlos";
-		#interconnect-cells = <1>;
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
new file mode 100644
index 000000000000..49eb156b08e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm6350-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description:
+  Qualcomm RPMh-based interconnect provider on SM6350.
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6350-aggre1-noc
+      - qcom,sm6350-aggre2-noc
+      - qcom,sm6350-config-noc
+      - qcom,sm6350-dc-noc
+      - qcom,sm6350-gem-noc
+      - qcom,sm6350-mmss-noc
+      - qcom,sm6350-npu-noc
+      - qcom,sm6350-system-noc
+
+  reg:
+    maxItems: 1
+
+  '#interconnect-cells': true
+
+patternProperties:
+  '^interconnect-[a-z0-9\-]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+    $ref: qcom,rpmh-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sm6350-clk-virt
+          - qcom,sm6350-compute-noc
+
+      '#interconnect-cells': true
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    config_noc: interconnect@1500000 {
+        compatible = "qcom,sm6350-config-noc";
+        reg = <0x01500000 0x28000>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    system_noc: interconnect@1620000 {
+        compatible = "qcom,sm6350-system-noc";
+        reg = <0x01620000 0x17080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+
+        clk_virt: interconnect-clk-virt {
+            compatible = "qcom,sm6350-clk-virt";
+            #interconnect-cells = <2>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
new file mode 100644
index 000000000000..ad9ed596dfef
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
@@ -0,0 +1,290 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/samsung,exynos-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Bus and Interconnect
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung Exynos SoC has many buses for data transfer between DRAM and
+  sub-blocks in SoC. Most Exynos SoCs share the common architecture for buses.
+  Generally, each bus of Exynos SoC includes a source clock and a power line,
+  which are able to change the clock frequency of the bus in runtime. To
+  monitor the usage of each bus in runtime, the driver uses the PPMU (Platform
+  Performance Monitoring Unit), which is able to measure the current load of
+  sub-blocks.
+
+  The Exynos SoC includes the various sub-blocks which have the each AXI bus.
+  The each AXI bus has the owned source clock but, has not the only owned power
+  line. The power line might be shared among one more sub-blocks.  So, we can
+  divide into two type of device as the role of each sub-block.  There are two
+  type of bus devices as following::
+   - parent bus device
+   - passive bus device
+
+  Basically, parent and passive bus device share the same power line.  The
+  parent bus device can only change the voltage of shared power line and the
+  rest bus devices (passive bus device) depend on the decision of the parent
+  bus device. If there are three blocks which share the VDD_xxx power line,
+  Only one block should be parent device and then the rest blocks should depend
+  on the parent device as passive device.
+
+    VDD_xxx |--- A block (parent)
+      |--- B block (passive)
+      |--- C block (passive)
+
+  There are a little different composition among Exynos SoC because each Exynos
+  SoC has different sub-blocks. Therefore, such difference should be specified
+  in devicetree file instead of each device driver. In result, this driver is
+  able to support the bus frequency for all Exynos SoCs.
+
+  Detailed correlation between sub-blocks and power line according
+  to Exynos SoC::
+   - In case of Exynos3250, there are two power line as following::
+     VDD_MIF |--- DMC (Dynamic Memory Controller)
+
+     VDD_INT |--- LEFTBUS (parent device)
+       |--- PERIL
+       |--- MFC
+       |--- G3D
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- FSYS
+       |--- LCD0
+       |--- PERIR
+       |--- ISP
+       |--- CAM
+
+     - MIF bus's frequency/voltage table
+       -----------------------
+       |Lv| Freq   | Voltage |
+       -----------------------
+       |L1| 50000  |800000   |
+       |L2| 100000 |800000   |
+       |L3| 134000 |800000   |
+       |L4| 200000 |825000   |
+       |L5| 400000 |875000   |
+       -----------------------
+
+     - INT bus's frequency/voltage table
+       ----------------------------------------------------------
+       |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP    |PERIL  ||VDD_INT |
+       | name|       |LCD0    |       |       |       ||        |
+       |     |       |FSYS    |       |       |       ||        |
+       |     |       |MFC     |       |       |       ||        |
+       ----------------------------------------------------------
+       |Mode |*parent|passive |passive|passive|passive||        |
+       ----------------------------------------------------------
+       |Lv   |Frequency                               ||Voltage |
+       ----------------------------------------------------------
+       |L1   |50000  |50000   |50000  |50000  |50000  ||900000  |
+       |L2   |80000  |80000   |80000  |80000  |80000  ||900000  |
+       |L3   |100000 |100000  |100000 |100000 |100000 ||1000000 |
+       |L4   |134000 |134000  |200000 |200000 |       ||1000000 |
+       |L5   |200000 |200000  |400000 |300000 |       ||1000000 |
+       ----------------------------------------------------------
+
+   - In case of Exynos4210, there is one power line as following::
+     VDD_INT |--- DMC (parent device, Dynamic Memory Controller)
+       |--- LEFTBUS
+       |--- PERIL
+       |--- MFC(L)
+       |--- G3D
+       |--- TV
+       |--- LCD0
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- MFC(R)
+       |--- CAM
+       |--- FSYS
+       |--- GPS
+       |--- LCD0
+       |--- LCD1
+
+   - In case of Exynos4x12, there are two power line as following::
+     VDD_MIF |--- DMC (Dynamic Memory Controller)
+
+     VDD_INT |--- LEFTBUS (parent device)
+       |--- PERIL
+       |--- MFC(L)
+       |--- G3D
+       |--- TV
+       |--- IMAGE
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- MFC(R)
+       |--- CAM
+       |--- FSYS
+       |--- GPS
+       |--- LCD0
+       |--- ISP
+
+   - In case of Exynos5422, there are two power line as following::
+     VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
+             |--- DREX 1
+
+     VDD_INT |--- NoC_Core (parent device)
+       |--- G2D
+       |--- G3D
+       |--- DISP1
+       |--- NoC_WCORE
+       |--- GSCL
+       |--- MSCL
+       |--- ISP
+       |--- MFC
+       |--- GEN
+       |--- PERIS
+       |--- PERIC
+       |--- FSYS
+       |--- FSYS2
+
+   - In case of Exynos5433, there is VDD_INT power line as following::
+     VDD_INT |--- G2D (parent device)
+       |--- MSCL
+       |--- GSCL
+       |--- JPEG
+       |--- MFC
+       |--- HEVC
+       |--- BUS0
+       |--- BUS1
+       |--- BUS2
+       |--- PERIS (Fixed clock rate)
+       |--- PERIC (Fixed clock rate)
+       |--- FSYS  (Fixed clock rate)
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos-bus
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: bus
+
+  devfreq:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Parent bus device. Valid and required only for the passive bus devices.
+
+  devfreq-events:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 4
+    description:
+      Devfreq-event device to monitor the current utilization of buses. Valid
+      and required only for the parent bus devices.
+
+  exynos,saturation-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Percentage value which is used to calibrate the performance count against
+      total cycle count.  Valid only for the parent bus devices.
+
+  '#interconnect-cells':
+    const: 0
+
+  interconnects:
+    minItems: 1
+    maxItems: 2
+
+  operating-points-v2: true
+
+  samsung,data-clock-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+    description:
+      Ratio of the data throughput in B/s to minimum data clock frequency in
+      Hz.
+
+  vdd-supply:
+    description:
+      Main bus power rail. Valid and required only for the parent bus devices.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos3250.h>
+
+    bus-dmc {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu_dmc CLK_DIV_DMC>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_dmc_opp_table>;
+        devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+        vdd-supply = <&buck1_reg>;
+    };
+
+    ppmu_dmc0: ppmu@106a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x106a0000 0x2000>;
+        events {
+            ppmu_dmc0_3: ppmu-event3-dmc0 {
+                event-name = "ppmu-event3-dmc0";
+            };
+        };
+    };
+
+    bus_leftbus: bus-leftbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu CLK_DIV_GDL>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+        vdd-supply = <&buck3_reg>;
+    };
+
+    bus-rightbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu CLK_DIV_GDR>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        devfreq = <&bus_leftbus>;
+    };
+
+  - |
+    dmc: bus-dmc {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_DMC>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_dmc_opp_table>;
+        samsung,data-clock-ratio = <4>;
+        #interconnect-cells = <0>;
+        devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+        vdd-supply = <&buck1_reg>;
+    };
+
+    leftbus: bus-leftbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_GDL>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        interconnects = <&dmc>;
+        #interconnect-cells = <0>;
+        devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+        vdd-supply = <&buck3_reg>;
+    };
+
+    display: bus-display {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_ACLK_266>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_display_opp_table>;
+        interconnects = <&leftbus &dmc>;
+        #interconnect-cells = <0>;
+        devfreq = <&leftbus>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
new file mode 100644
index 000000000000..5da333c644c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/actions,owl-sirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs SIRQ interrupt controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+  This interrupt controller is found in the Actions Semi Owl SoCs (S500, S700
+  and S900) and provides support for handling up to 3 external interrupt lines.
+
+properties:
+  compatible:
+    enum:
+      - actions,s500-sirq
+      - actions,s700-sirq
+      - actions,s900-sirq
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the input IRQ number, between 0 and 2, while the second
+      cell is the trigger type as defined in interrupt.txt in this directory.
+
+  'interrupts':
+    description: |
+      Contains the GIC SPI IRQs mapped to the external interrupt lines.
+      They shall be specified sequentially from output 0 to 2.
+    minItems: 3
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - 'interrupts'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sirq: interrupt-controller@b01b0200 {
+      compatible = "actions,s500-sirq";
+      reg = <0xb01b0200 0x4>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */
+                   <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */
+                   <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
index 953d875b5e74..a713633be733 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun4i-a10-ic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Interrupt Controller Device Tree Bindings
+title: Allwinner A10 Interrupt Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
new file mode 100644
index 000000000000..4fa6fd400eef
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 NMI/Wakeup Interrupt Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  "#interrupt-cells":
+    const: 3
+    description:
+      The first cell is GIC_SPI (0), the second cell is the IRQ number, and
+      the third cell is the trigger type as defined in interrupt.txt in this
+      directory.
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun6i-a31-r-intc
+      - items:
+          - enum:
+              - allwinner,sun8i-a83t-r-intc
+              - allwinner,sun8i-h3-r-intc
+              - allwinner,sun50i-a64-r-intc
+          - const: allwinner,sun6i-a31-r-intc
+      - const: allwinner,sun50i-h6-r-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      The GIC interrupt labeled as "External NMI".
+
+  interrupt-controller: true
+
+required:
+  - "#interrupt-cells"
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    r_intc: interrupt-controller@1f00c00 {
+            compatible = "allwinner,sun50i-a64-r-intc",
+                         "allwinner,sun6i-a31-r-intc";
+            interrupt-controller;
+            #interrupt-cells = <3>;
+            reg = <0x01f00c00 0x400>;
+            interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
index cf09055da78b..83603180d8d9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 Non-Maskable Interrupt Controller Device Tree Bindings
+title: Allwinner A20 Non-Maskable Interrupt Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -22,20 +22,16 @@ properties:
 
   compatible:
     oneOf:
-      - const: allwinner,sun6i-a31-r-intc
       - const: allwinner,sun6i-a31-sc-nmi
         deprecated: true
       - const: allwinner,sun7i-a20-sc-nmi
       - items:
-        - const: allwinner,sun8i-a83t-r-intc
-        - const: allwinner,sun6i-a31-r-intc
-      - const: allwinner,sun9i-a80-sc-nmi
+          - const: allwinner,sun8i-v3s-nmi
+          - const: allwinner,sun9i-a80-nmi
+      - const: allwinner,sun9i-a80-nmi
       - items:
-        - const: allwinner,sun50i-a64-r-intc
-        - const: allwinner,sun6i-a31-r-intc
-      - items:
-        - const: allwinner,sun50i-h6-r-intc
-        - const: allwinner,sun6i-a31-r-intc
+          - const: allwinner,sun50i-a100-nmi
+          - const: allwinner,sun9i-a80-nmi
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
index 23b18b92c558..bde63f8f090e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -18,6 +18,7 @@ Required properties:
     "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
     "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
     "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
+    "amlogic,meson-s4-gpio-intc" for S4 SoCs (S802X2, S905Y4, S805X2G, S905W2)
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an
diff --git a/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt b/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt
deleted file mode 100644
index f4b4193d830e..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Andestech Internal Vector Interrupt Controller
-
-The Internal Vector Interrupt Controller (IVIC) is a basic interrupt controller
-suitable for a simpler SoC platform not requiring a more sophisticated and
-bigger External Vector Interrupt Controller.
-
-
-Main node required properties:
-
-- compatible : should at least contain  "andestech,ativic32".
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells: 1 cells and refer to interrupt-controller/interrupts
-
-Examples:
-	intc: interrupt-controller {
-		compatible = "andestech,ativic32";
-		#interrupt-cells = <1>;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
new file mode 100644
index 000000000000..e18107eafe7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/apple,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Interrupt Controller
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  The Apple Interrupt Controller is a simple interrupt controller present on
+  Apple ARM SoC platforms, including various iPhone and iPad devices and the
+  "Apple Silicon" Macs.
+
+  It provides the following features:
+
+  - Level-triggered hardware IRQs wired to SoC blocks
+    - Single mask bit per IRQ
+    - Per-IRQ affinity setting
+    - Automatic masking on event delivery (auto-ack)
+    - Software triggering (ORed with hw line)
+  - 2 per-CPU IPIs (meant as "self" and "other", but they are interchangeable
+    if not symmetric)
+  - Automatic prioritization (single event/ack register per CPU, lower IRQs =
+    higher priority)
+  - Automatic masking on ack
+  - Default "this CPU" register view and explicit per-CPU views
+
+  This device also represents the FIQ interrupt sources on platforms using AIC,
+  which do not go through a discrete interrupt controller.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: apple,t8103-aic
+      - const: apple,aic
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 3
+    description: |
+      The 1st cell contains the interrupt type:
+        - 0: Hardware IRQ
+        - 1: FIQ
+
+      The 2nd cell contains the interrupt number.
+        - HW IRQs: interrupt number
+        - FIQs:
+          - 0: physical HV timer
+          - 1: virtual HV timer
+          - 2: physical guest timer
+          - 3: virtual guest timer
+          - 4: 'efficient' CPU PMU
+          - 5: 'performance' CPU PMU
+
+      The 3rd cell contains the interrupt flags. This is normally
+      IRQ_TYPE_LEVEL_HIGH (4).
+
+  reg:
+    description: |
+      Specifies base physical address and size of the AIC registers.
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  affinities:
+    type: object
+    additionalProperties: false
+    description:
+      FIQ affinity can be expressed as a single "affinities" node,
+      containing a set of sub-nodes, one per FIQ with a non-default
+      affinity.
+    patternProperties:
+      "^.+-affinity$":
+        type: object
+        additionalProperties: false
+        properties:
+          apple,fiq-index:
+            description:
+              The interrupt number specified as a FIQ, and for which
+              the affinity is not the default.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 5
+
+          cpus:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+            description:
+              Should be a list of phandles to CPU nodes (as described in
+              Documentation/devicetree/bindings/arm/cpus.yaml).
+
+        required:
+          - apple,fiq-index
+          - cpus
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aic: interrupt-controller@23b100000 {
+            compatible = "apple,t8103-aic", "apple,aic";
+            #interrupt-cells = <3>;
+            interrupt-controller;
+            reg = <0x2 0x3b100000 0x0 0x8000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml
new file mode 100644
index 000000000000..47a78a167aba
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/apple,aic2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Interrupt Controller 2
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  The Apple Interrupt Controller 2 is a simple interrupt controller present on
+  Apple ARM SoC platforms starting with t600x (M1 Pro and Max).
+
+  It provides the following features:
+
+  - Level-triggered hardware IRQs wired to SoC blocks
+    - Single mask bit per IRQ
+    - Automatic masking on event delivery (auto-ack)
+    - Software triggering (ORed with hw line)
+  - Automatic prioritization (single event/ack register per CPU, lower IRQs =
+    higher priority)
+  - Automatic masking on ack
+  - Support for multiple dies
+
+  This device also represents the FIQ interrupt sources on platforms using AIC,
+  which do not go through a discrete interrupt controller. It also handles
+  FIQ-based Fast IPIs.
+
+properties:
+  compatible:
+    items:
+      - const: apple,t6000-aic
+      - const: apple,aic2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 4
+    description: |
+      The 1st cell contains the interrupt type:
+        - 0: Hardware IRQ
+        - 1: FIQ
+
+      The 2nd cell contains the die ID.
+
+      The next cell contains the interrupt number.
+        - HW IRQs: interrupt number
+        - FIQs:
+          - 0: physical HV timer
+          - 1: virtual HV timer
+          - 2: physical guest timer
+          - 3: virtual guest timer
+
+      The last cell contains the interrupt flags. This is normally
+      IRQ_TYPE_LEVEL_HIGH (4).
+
+  reg:
+    items:
+      - description: Address and size of the main AIC2 registers.
+      - description: Address and size of the AIC2 Event register.
+
+  reg-names:
+    items:
+      - const: core
+      - const: event
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aic: interrupt-controller@28e100000 {
+            compatible = "apple,t6000-aic", "apple,aic2";
+            #interrupt-cells = <4>;
+            interrupt-controller;
+            reg = <0x2 0x8e100000 0x0 0xc000>,
+                  <0x2 0x8e10c000 0x0 0x4>;
+            reg-names = "core", "event";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
index 66aacd106503..9f7d3e11aacb 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM Generic Interrupt Controller, version 3
 
 maintainers:
-  - Marc Zyngier <marc.zyngier@arm.com>
+  - Marc Zyngier <maz@kernel.org>
 
 description: |
   AArch64 SMP cores are often associated with a GICv3, providing Private
@@ -78,7 +78,11 @@ properties:
       - GIC Hypervisor interface (GICH)
       - GIC Virtual CPU interface (GICV)
 
-      GICC, GICH and GICV are optional.
+      GICC, GICH and GICV are optional, but must be described if the CPUs
+      support them. Examples of such CPUs are ARM's implementations of the
+      ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and
+      A73 (this list is not exhaustive).
+
     minItems: 2
     maxItems: 4096   # Should be enough?
 
@@ -91,18 +95,16 @@ properties:
     description:
       If using padding pages, specifies the stride of consecutive
       redistributors. Must be a multiple of 64kB.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint64
-      - multipleOf: 0x10000
-        exclusiveMinimum: 0
+    $ref: /schemas/types.yaml#/definitions/uint64
+    multipleOf: 0x10000
+    exclusiveMinimum: 0
 
   "#redistributor-regions":
     description:
       The number of independent contiguous regions occupied by the
       redistributors. Required if more than one such region is present.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - maximum: 4096   # Should be enough?
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 4096
 
   msi-controller:
     description:
@@ -114,22 +116,20 @@ properties:
       A list of pairs <intid span>, where "intid" is the first SPI of a range
       that can be used an MBI, and "span" the size of that range. Multiple
       ranges can be provided.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-matrix
-      - items:
-          minItems: 2
-          maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 2
+      maxItems: 2
 
   mbi-alias:
     description:
       Address property. Base address of an alias of the GICD region containing
       only the {SET,CLR}SPI registers to be used if isolation is required,
       and if supported by the HW.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          minItems: 1
-          maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minItems: 1
+      maxItems: 2
 
   ppi-partitions:
     type: object
@@ -142,6 +142,8 @@ properties:
         properties:
           affinity:
             $ref: /schemas/types.yaml#/definitions/phandle-array
+            items:
+              maxItems: 1
             description:
               Should be a list of phandles to CPU nodes (as described in
               Documentation/devicetree/bindings/arm/cpus.yaml).
@@ -149,13 +151,25 @@ properties:
         required:
           - affinity
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: aclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
 dependencies:
   mbi-ranges: [ msi-controller ]
   msi-controller: [ mbi-ranges ]
 
 required:
   - compatible
-  - interrupts
   - reg
 
 patternProperties:
@@ -188,11 +202,10 @@ patternProperties:
         description:
           (u32, u32) tuple describing the untranslated
           address and size of the pre-ITS window.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              minItems: 2
-              maxItems: 2
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minItems: 2
+          maxItems: 2
 
     required:
       - compatible
@@ -231,6 +244,7 @@ examples:
       };
     };
 
+  - |
     interrupt-controller@2c010000 {
       compatible = "arm,gic-v3";
       #interrupt-cells = <4>;
@@ -246,7 +260,7 @@ examples:
             <0x2c040000 0x2000>,  // GICC
             <0x2c060000 0x2000>,  // GICH
             <0x2c080000 0x2000>;  // GICV
-      interrupts = <1 9 4>;
+      interrupts = <1 9 4 0>;
 
       msi-controller@2c200000 {
         compatible = "arm,gic-v3-its";
@@ -264,11 +278,11 @@ examples:
 
       ppi-partitions {
         part0: interrupt-partition-0 {
-          affinity = <&cpu0 &cpu2>;
+          affinity = <&cpu0>, <&cpu2>;
         };
 
         part1: interrupt-partition-1 {
-          affinity = <&cpu1 &cpu3>;
+          affinity = <&cpu1>, <&cpu3>;
         };
       };
     };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
index 9a47820ef346..220256907461 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
@@ -35,11 +35,16 @@ properties:
               - arm,gic-400
               - arm,pl390
               - arm,tc11mp-gic
-              - nvidia,tegra210-agic
               - qcom,msm-8660-qgic
               - qcom,msm-qgic2
 
       - items:
+          - const: arm,gic-400
+          - enum:
+              - arm,cortex-a15-gic
+              - arm,cortex-a7-gic
+
+      - items:
           - const: arm,arm1176jzf-devchip-gic
           - const: arm,arm11mp-gic
 
@@ -47,12 +52,21 @@ properties:
           - const: brcm,brahma-b15-gic
           - const: arm,cortex-a15-gic
 
+      - oneOf:
+          - const: nvidia,tegra210-agic
+          - items:
+              - enum:
+                  - nvidia,tegra186-agic
+                  - nvidia,tegra194-agic
+                  - nvidia,tegra234-agic
+              - const: nvidia,tegra210-agic
+
   interrupt-controller: true
 
   "#address-cells":
-    enum: [ 0, 1 ]
+    enum: [ 0, 1, 2 ]
   "#size-cells":
-    const: 1
+    enum: [ 1, 2 ]
 
   "#interrupt-cells":
     const: 3
@@ -125,6 +139,9 @@ properties:
   power-domains:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt
deleted file mode 100644
index dd527216c5fb..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* ARM Vectored Interrupt Controller
-
-One or more Vectored Interrupt Controllers (VIC's) can be connected in an ARM
-system for interrupt routing.  For multiple controllers they can either be
-nested or have the outputs wire-OR'd together.
-
-Required properties:
-
-- compatible : should be one of
-	"arm,pl190-vic"
-	"arm,pl192-vic"
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : The number of cells to define the interrupts.  Must be 1 as
-  the VIC has no configuration options for interrupt sources.  The cell is a u32
-  and defines the interrupt number.
-- reg : The register bank for the VIC.
-
-Optional properties:
-
-- interrupts : Interrupt source for parent controllers if the VIC is nested.
-- valid-mask : A one cell big bit mask of valid interrupt sources. Each bit
-  represents single interrupt source, starting from source 0 at LSb and ending
-  at source 31 at MSb. A bit that is set means that the source is wired and
-  clear means otherwise. If unspecified, defaults to all valid.
-- valid-wakeup-mask : A one cell big bit mask of interrupt sources that can be
-  configured as wake up source for the system. Order of bits is the same as for
-  valid-mask property. A set bit means that this interrupt source can be
-  configured as a wake up source for the system. If unspecied, defaults to all
-  interrupt sources configurable as wake up sources.
-
-Example:
-
-	vic0: interrupt-controller@60000 {
-		compatible = "arm,pl192-vic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x60000 0x1000>;
-
-		valid-mask = <0xffffff7f>;
-		valid-wakeup-mask = <0x0000ff7f>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml
new file mode 100644
index 000000000000..0075e72fe8c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,vic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Vectored Interrupt Controller
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |+
+  One or more Vectored Interrupt Controllers (VIC's) can be connected in an
+  ARM system for interrupt routing.  For multiple controllers they can either
+  be nested or have the outputs wire-OR'd together.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - arm,pl190-vic
+      - arm,pl192-vic
+      - arm,versatile-vic
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+    description:
+      The number of cells to define the interrupts.  It must be 1 as the
+      VIC has no configuration options for interrupt sources. The single
+      cell defines the interrupt number.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  valid-mask:
+    description:
+      A one cell big bit mask of valid interrupt sources. Each bit
+      represents single interrupt source, starting from source 0 at
+      LSb and ending at source 31 at MSb. A bit that is set means
+      that the source is wired and clear means otherwise. If unspecified,
+      defaults to all valid.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  valid-wakeup-mask:
+    description:
+      A one cell big bit mask of interrupt sources that can be configured
+      as wake up source for the system. Order of bits is the same as for
+      valid-mask property. A set bit means that this interrupt source
+      can be configured as a wake up source for the system. If unspecied,
+      defaults to all interrupt sources configurable as wake up sources.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    // PL192 VIC
+    vic0: interrupt-controller@60000 {
+      compatible = "arm,pl192-vic";
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      reg = <0x60000 0x1000>;
+
+      valid-mask = <0xffffff7f>;
+      valid-wakeup-mask = <0x0000ff7f>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
deleted file mode 100644
index 37aea40d5430..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom BCM3380-style Level 1 / Level 2 interrupt controller
-
-This interrupt controller shows up in various forms on many BCM338x/BCM63xx
-chipsets.  It has the following properties:
-
-- outputs a single interrupt signal to its interrupt controller parent
-
-- contains one or more enable/status word pairs, which often appear at
-  different offsets in different blocks
-
-- no atomic set/clear operations
-
-Required properties:
-
-- compatible: should be "brcm,bcm3380-l2-intc"
-- reg: specifies one or more enable/status pairs, in the following format:
-  <enable_reg 0x4 status_reg 0x4>...
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent controller
-  node, valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Example:
-
-irq0_intc: interrupt-controller@10000020 {
-	compatible = "brcm,bcm3380-l2-intc";
-	reg = <0x10000024 0x4 0x1000002c 0x4>,
-	      <0x10000020 0x4 0x10000028 0x4>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	interrupt-parent = <&cpu_intc>;
-	interrupts = <2>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
deleted file mode 100644
index 5ddef1dc0c1a..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Broadcom BCM7038-style Level 1 interrupt controller
-
-This block is a first level interrupt controller that is typically connected
-directly to one of the HW INT lines on each CPU.  Every BCM7xxx set-top chip
-since BCM7038 has contained this hardware.
-
-Key elements of the hardware design include:
-
-- 64, 96, 128, or 160 incoming level IRQ lines
-
-- Most onchip peripherals are wired directly to an L1 input
-
-- A separate instance of the register set for each CPU, allowing individual
-  peripheral IRQs to be routed to any CPU
-
-- Atomic mask/unmask operations
-
-- No polarity/level/edge settings
-
-- No FIFO or priority encoder logic; software is expected to read all
-  2-5 status words to determine which IRQs are pending
-
-Required properties:
-
-- compatible: should be "brcm,bcm7038-l1-intc"
-- reg: specifies the base physical address and size of the registers;
-  the number of supported IRQs is inferred from the size argument
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
-  node; valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: If present, this means the L1 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Optional properties:
-
-- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts
-  have already been configured by the firmware and should be left unmanaged.
-  This should have one 32-bit word per status/set/clear/mask group.
-
-If multiple reg ranges and interrupt-parent entries are present on an SMP
-system, the driver will allow IRQ SMP affinity to be set up through the
-/proc/irq/ interface.  In the simplest possible configuration, only one
-reg range and one interrupt-parent is needed.
-
-Example:
-
-periph_intc: periph_intc@1041a400 {
-        compatible = "brcm,bcm7038-l1-intc";
-        reg = <0x1041a400 0x30 0x1041a600 0x30>;
-
-        interrupt-controller;
-        #interrupt-cells = <1>;
-
-        interrupt-parent = <&cpu_intc>;
-        interrupts = <2>, <3>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
new file mode 100644
index 000000000000..5ecb6faa70dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7038-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7038-style Level 1 interrupt controller
+
+description: >
+  This block is a first level interrupt controller that is typically connected
+  directly to one of the HW INT lines on each CPU.  Every BCM7xxx set-top chip
+  since BCM7038 has contained this hardware.
+
+  Key elements of the hardware design include:
+
+   - 64, 96, 128, or 160 incoming level IRQ lines
+
+   - Most onchip peripherals are wired directly to an L1 input
+
+   - A separate instance of the register set for each CPU, allowing individual
+     peripheral IRQs to be routed to any CPU
+
+   - Atomic mask/unmask operations
+
+   - No polarity/level/edge settings
+
+   - No FIFO or priority encoder logic; software is expected to read all
+     2-5 status words to determine which IRQs are pending
+
+   If multiple reg ranges and interrupt-parent entries are present on an SMP
+   system, the driver will allow IRQ SMP affinity to be set up through the
+   /proc/irq/ interface.  In the simplest possible configuration, only one
+   reg range and one interrupt-parent is needed.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm7038-l1-intc
+
+  reg:
+    description: >
+      Specifies the base physical address and size of the registers
+      the number of supported IRQs is inferred from the size argument
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    description: >
+     Specifies the interrupt line(s) in the interrupt-parent controller node;
+     valid values depend on the type of parent interrupt controller
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L1 controller can be used as a
+      wakeup source for system suspend/resume.
+
+  brcm,int-fwd-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      If present, a bit mask to indicate which interrupts have already been
+      configured by the firmware and should be left unmanaged. This should
+      have one 32-bit word per status/set/clear/mask group.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    periph_intc: interrupt-controller@1041a400 {
+      compatible = "brcm,bcm7038-l1-intc";
+      reg = <0x1041a400 0x30>, <0x1041a600 0x30>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      interrupt-parent = <&cpu_intc>;
+      interrupts = <2>, <3>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
deleted file mode 100644
index addd86b6ca2f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-Broadcom BCM7120-style Level 2 interrupt controller
-
-This interrupt controller hardware is a second level interrupt controller that
-is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
-platforms. It can be found on BCM7xxx products starting with BCM7120.
-
-Such an interrupt controller has the following hardware design:
-
-- outputs multiple interrupts signals towards its interrupt controller parent
-
-- controls how some of the interrupts will be flowing, whether they will
-  directly output an interrupt signal towards the interrupt controller parent,
-  or if they will output an interrupt signal at this 2nd level interrupt
-  controller, in particular for UARTs
-
-- has one 32-bit enable word and one 32-bit status word
-
-- no atomic set/clear operations
-
-- not all bits within the interrupt controller actually map to an interrupt
-
-The typical hardware layout for this controller is represented below:
-
-2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
-
-0 -----[ MUX ] ------------|==========> GIC interrupt 75
-          \-----------\
-                       |
-1 -----[ MUX ] --------)---|==========> GIC interrupt 76
-          \------------|
-                       |
-2 -----[ MUX ] --------)---|==========> GIC interrupt 77
-          \------------|
-                       |
-3 ---------------------|
-4 ---------------------|
-5 ---------------------|
-7 ---------------------|---|===========> GIC interrupt 66
-9 ---------------------|
-10 --------------------|
-11 --------------------/
-
-6 ------------------------\
-                           |===========> GIC interrupt 64
-8 ------------------------/
-
-12 ........................ X
-13 ........................ X 		(not connected)
-..
-31 ........................ X
-
-Required properties:
-
-- compatible: should be "brcm,bcm7120-l2-intc"
-- reg: specifies the base physical address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
-  node, valid values depend on the type of parent interrupt controller
-- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts
-  are wired to this 2nd level interrupt controller, and how they match their
-  respective interrupt parents. Should match exactly the number of interrupts
-  specified in the 'interrupts' property.
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-- brcm,int-fwd-mask: if present, a bit mask to configure the interrupts which
-  have a mux gate, typically UARTs. Setting these bits will make their
-  respective interrupt outputs bypass this 2nd level interrupt controller
-  completely; it is completely transparent for the interrupt controller
-  parent. This should have one 32-bit word per enable/status pair.
-
-Example:
-
-irq0_intc: interrupt-controller@f0406800 {
-	compatible = "brcm,bcm7120-l2-intc";
-	interrupt-parent = <&intc>;
-	#interrupt-cells = <1>;
-	reg = <0xf0406800 0x8>;
-	interrupt-controller;
-	interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
-	brcm,int-map-mask = <0xeb8>, <0x140>;
-	brcm,int-fwd-mask = <0x7>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
new file mode 100644
index 000000000000..46b2eb3c43ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7120-style Level 2 and Broadcom BCM3380 Level 1 / Level 2
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description: >
+  This interrupt controller hardware is a second level interrupt controller that
+  is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+  platforms. It can be found on BCM7xxx products starting with BCM7120.
+
+  Such an interrupt controller has the following hardware design:
+
+  - outputs multiple interrupts signals towards its interrupt controller parent
+
+  - controls how some of the interrupts will be flowing, whether they will
+    directly output an interrupt signal towards the interrupt controller parent,
+    or if they will output an interrupt signal at this 2nd level interrupt
+    controller, in particular for UARTs
+
+  - has one 32-bit enable word and one 32-bit status word
+
+  - no atomic set/clear operations
+
+  - not all bits within the interrupt controller actually map to an interrupt
+
+  The typical hardware layout for this controller is represented below:
+
+  2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
+
+  0 -----[ MUX ] ------------|==========> GIC interrupt 75
+            \-----------\
+                         |
+  1 -----[ MUX ] --------)---|==========> GIC interrupt 76
+            \------------|
+                         |
+  2 -----[ MUX ] --------)---|==========> GIC interrupt 77
+            \------------|
+                         |
+  3 ---------------------|
+  4 ---------------------|
+  5 ---------------------|
+  7 ---------------------|---|===========> GIC interrupt 66
+  9 ---------------------|
+  10 --------------------|
+  11 --------------------/
+
+  6 ------------------------\
+                            |===========> GIC interrupt 64
+  8 ------------------------/
+
+  12 ........................ X
+  13 ........................ X           (not connected)
+  ..
+  31 ........................ X
+
+  The BCM3380 Level 1 / Level 2 interrrupt controller shows up in various forms
+  on many BCM338x/BCM63xx chipsets. It has the following properties:
+
+  - outputs a single interrupt signal to its interrupt controller parent
+
+  - contains one or more enable/status word pairs, which often appear at
+    different offsets in different blocks
+
+  - no atomic set/clear operations
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7120-l2-intc
+          - brcm,bcm3380-l2-intc
+
+  reg:
+    minItems: 1
+    maxItems: 4
+    description: >
+      Specifies the base physical address and size of the registers
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+
+  brcm,int-map-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      32-bits bit mask describing how many and which interrupts are wired to
+      this 2nd level interrupt controller, and how they match their respective
+      interrupt parents. Should match exactly the number of interrupts
+      specified in the 'interrupts' property.
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L2 controller can be used as a wakeup source
+      for system suspend/resume.
+
+  brcm,int-fwd-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      if present, a bit mask to configure the interrupts which have a mux gate,
+      typically UARTs. Setting these bits will make their respective interrupt
+      outputs bypass this 2nd level interrupt controller completely; it is
+      completely transparent for the interrupt controller parent. This should
+      have one 32-bit word per enable/status pair.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+examples:
+  - |
+    irq0_intc: interrupt-controller@f0406800 {
+      compatible = "brcm,bcm7120-l2-intc";
+      interrupt-parent = <&intc>;
+      #interrupt-cells = <1>;
+      reg = <0xf0406800 0x8>;
+      interrupt-controller;
+      interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
+      brcm,int-map-mask = <0xeb8>, <0x140>;
+      brcm,int-fwd-mask = <0x7>;
+    };
+
+  - |
+    irq1_intc: interrupt-controller@10000020 {
+       compatible = "brcm,bcm3380-l2-intc";
+       reg = <0x10000024 0x4>, <0x1000002c 0x4>,
+             <0x10000020 0x4>, <0x10000028 0x4>;
+       interrupt-controller;
+       #interrupt-cells = <1>;
+       interrupt-parent = <&cpu_intc>;
+       interrupts = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
deleted file mode 100644
index d514ec060a4a..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Broadcom Generic Level 2 Interrupt Controller
-
-Required properties:
-
-- compatible: should be "brcm,l2-intc" for latched interrupt controllers
-              should be "brcm,bcm7271-l2-intc" for level interrupt controllers
-- reg: specifies the base physical address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an
-  interrupt source. Should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent irq space
-  to be used for cascading
-
-Optional properties:
-
-- brcm,irq-can-wake: If present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Example:
-
-hif_intr2_intc: interrupt-controller@f0441000 {
-	compatible = "brcm,l2-intc";
-	reg = <0xf0441000 0x30>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	interrupt-parent = <&intc>;
-	interrupts = <0x0 0x20 0x0>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
new file mode 100644
index 000000000000..8961afca96f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Generic Level 2 Interrupt Controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,hif-spi-l2-intc
+              - brcm,upg-aux-aon-l2-intc
+          - const: brcm,l2-intc
+      - items:
+          - enum:
+              - brcm,bcm2711-l2-intc
+          - const: brcm,l2-intc
+      - items:
+          - const: brcm,bcm7271-l2-intc
+      - items:
+          - const: brcm,l2-intc
+
+  reg:
+    maxItems: 1
+    description: >
+      Specifies the base physical address and size of the registers
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L2 controller can be used as a wakeup source
+      for system suspend/resume.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+examples:
+  - |
+    hif_intr2_intc: interrupt-controller@f0441000 {
+      compatible = "brcm,l2-intc";
+      reg = <0xf0441000 0x30>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      interrupt-parent = <&intc>;
+      interrupts = <0x0 0x20 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
index e13405355166..e6bbcae4d07f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
@@ -10,7 +10,7 @@ Interrupt number definition:
  16-31  : private  irq, and we use 16 as the co-processor timer.
  31-1024: common irq for soc ip.
 
-Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
+Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
  IRQ_TYPE_LEVEL_HIGH (default)
  IRQ_TYPE_LEVEL_LOW
  IRQ_TYPE_EDGE_RISING
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
index 43c6effbb5bd..1d6e0f64a807 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
@@ -31,7 +31,7 @@ properties:
       The 1st cell is hw interrupt number, the 2nd cell is channel index.
 
   clocks:
-    description: ipg clock.
+    maxItems: 1
 
   clock-names:
     const: ipg
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
deleted file mode 100644
index 582991c426ee..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Freescale IRQSTEER Interrupt multiplexer
-
-Required properties:
-
-- compatible: should be:
-	- "fsl,imx8m-irqsteer"
-	- "fsl,imx-irqsteer"
-- reg: Physical base address and size of registers.
-- interrupts: Should contain the up to 8 parent interrupt lines used to
-  multiplex the input interrupts. They should be specified sequentially
-  from output 0 to 7.
-- clocks: Should contain one clock for entry in clock-names
-  see Documentation/devicetree/bindings/clock/clock-bindings.txt
-- clock-names:
-   - "ipg": main logic clock
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value must be 1.
-- fsl,channel: The output channel that all input IRQs should be steered into.
-- fsl,num-irqs: Number of input interrupts of this channel.
-  Should be multiple of 32 input interrupts and up to 512 interrupts.
-
-Example:
-
-	interrupt-controller@32e2d000 {
-		compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
-		reg = <0x32e2d000 0x1000>;
-		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
-		clock-names = "ipg";
-		fsl,channel = <0>;
-		fsl,num-irqs = <64>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
new file mode 100644
index 000000000000..bcb5e20fa9ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IRQSTEER Interrupt Multiplexer
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx-irqsteer
+      - items:
+          - const: fsl,imx8m-irqsteer
+          - const: fsl,imx-irqsteer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      should contain the up to 8 parent interrupt lines used to multiplex
+      the input interrupts. They should be specified sequentially from
+      output 0 to 7.
+    items:
+      - description: output interrupt 0
+      - description: output interrupt 1
+      - description: output interrupt 2
+      - description: output interrupt 3
+      - description: output interrupt 4
+      - description: output interrupt 5
+      - description: output interrupt 6
+      - description: output interrupt 7
+    minItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  fsl,channel:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: |
+      u32 value representing the output channel that all input IRQs should be
+      steered into.
+
+  fsl,num-irqs:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: |
+      u32 value representing the number of input interrupts of this channel,
+      should be multiple of 32 input interrupts and up to 512 interrupts.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - interrupt-controller
+  - "#interrupt-cells"
+  - fsl,channel
+  - fsl,num-irqs
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@32e2d000 {
+        compatible = "fsl,imx-irqsteer";
+        reg = <0x32e2d000 0x1000>;
+        interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+        clock-names = "ipg";
+        fsl,channel = <0>;
+        fsl,num-irqs = <64>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
deleted file mode 100644
index f0ad7801e8cf..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Freescale Layerscape external IRQs
-
-Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting
-the polarity of certain external interrupt lines.
-
-The device node must be a child of the node representing the
-Supplemental Configuration Unit (SCFG).
-
-Required properties:
-- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
-- #interrupt-cells: Must be 2. The first element is the index of the
-  external interrupt line. The second element is the trigger type.
-- #address-cells: Must be 0.
-- interrupt-controller: Identifies the node as an interrupt controller
-- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
-  the SCFG.
-- interrupt-map: Specifies the mapping from external interrupts to GIC
-  interrupts.
-- interrupt-map-mask: Must be <0xffffffff 0>.
-
-Example:
-	scfg: scfg@1570000 {
-		compatible = "fsl,ls1021a-scfg", "syscon";
-		reg = <0x0 0x1570000 0x0 0x10000>;
-		big-endian;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x1570000 0x10000>;
-
-		extirq: interrupt-controller@1ac {
-			compatible = "fsl,ls1021a-extirq";
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x1ac 4>;
-			interrupt-map =
-				<0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-				<1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-				<2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-				<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-				<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-				<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-map-mask = <0xffffffff 0x0>;
-		};
-	};
-
-
-	interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-			      <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
new file mode 100644
index 000000000000..887e565b9573
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-extirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape External Interrupt Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA,
+  LX216xA) support inverting the polarity of certain external interrupt
+  lines.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,ls1021a-extirq
+          - fsl,ls1043a-extirq
+          - fsl,ls1088a-extirq
+      - items:
+          - enum:
+              - fsl,ls1046a-extirq
+          - const: fsl,ls1043a-extirq
+      - items:
+          - enum:
+              - fsl,ls2080a-extirq
+              - fsl,lx2160a-extirq
+          - const: fsl,ls1088a-extirq
+
+  '#interrupt-cells':
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+    description:
+      Specifies the Interrupt Polarity Control Register (INTPCR) in the
+      SCFG or the External Interrupt Control Register (IRQCR) in the ISC.
+
+  interrupt-map:
+    description: Specifies the mapping from external interrupts to GIC interrupts.
+
+  interrupt-map-mask: true
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupt-map
+  - interrupt-map-mask
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1021a-extirq
+    then:
+      properties:
+        interrupt-map:
+          minItems: 6
+          maxItems: 6
+        interrupt-map-mask:
+          items:
+            - const: 0x7
+            - const: 0
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1043a-extirq
+              - fsl,ls1046a-extirq
+              - fsl,ls1088a-extirq
+              - fsl,ls2080a-extirq
+              - fsl,lx2160a-extirq
+    then:
+      properties:
+        interrupt-map:
+          minItems: 12
+          maxItems: 12
+        interrupt-map-mask:
+          items:
+            - const: 0xf
+            - const: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    interrupt-controller@1ac {
+            compatible = "fsl,ls1021a-extirq";
+            #interrupt-cells = <2>;
+            #address-cells = <0>;
+            interrupt-controller;
+            reg = <0x1ac 4>;
+            interrupt-map =
+                    <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                    <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+                    <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+                    <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+                    <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+                    <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-map-mask = <0x7 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
new file mode 100644
index 000000000000..799ae5c3e32a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,mu-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX Messaging Unit (MU) work as msi controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  The Messaging Unit module enables two processors within the SoC to
+  communicate and coordinate by passing messages (e.g. data, status
+  and control) through the MU interface. The MU also provides the ability
+  for one processor (A side) to signal the other processor (B side) using
+  interrupts.
+
+  Because the MU manages the messaging between processors, the MU uses
+  different clocks (from each side of the different peripheral buses).
+  Therefore, the MU must synchronize the accesses from one side to the
+  other. The MU accomplishes synchronization using two sets of matching
+  registers (Processor A-side, Processor B-side).
+
+  MU can work as msi interrupt controller to do doorbell
+
+allOf:
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-mu-msi
+      - fsl,imx7ulp-mu-msi
+      - fsl,imx8ulp-mu-msi
+      - fsl,imx8ulp-mu-msi-s4
+
+  reg:
+    items:
+      - description: a side register base address
+      - description: b side register base address
+
+  reg-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  interrupts:
+    description: a side interrupt number.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: a side power domain
+      - description: b side power domain
+
+  power-domain-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  interrupt-controller: true
+
+  msi-controller: true
+
+  "#msi-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - msi-controller
+  - "#msi-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    msi-controller@5d270000 {
+        compatible = "fsl,imx6sx-mu-msi";
+        msi-controller;
+        #msi-cells = <0>;
+        interrupt-controller;
+        reg = <0x5d270000 0x10000>,     /* A side */
+              <0x5d300000 0x10000>;     /* B side */
+        reg-names = "processor-a-side", "processor-b-side";
+        interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd IMX_SC_R_MU_12A>,
+                        <&pd IMX_SC_R_MU_12B>;
+        power-domain-names = "processor-a-side", "processor-b-side";
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml
new file mode 100644
index 000000000000..afb3dd80b643
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/idt,32434-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT 79RC32434 Interrupt Controller
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  "#interrupt-cells":
+    const: 1
+
+  compatible:
+    const: idt,32434-pic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+required:
+  - "#interrupt-cells"
+  - compatible
+  - reg
+  - interrupt-controller
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    idtpic3: interrupt-controller@3800c {
+        compatible = "idt,32434-pic";
+        reg = <0x3800c 0x0c>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interrupt-parent = <&cpuintc>;
+        interrupts = <3>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt
deleted file mode 100644
index 42431f44697f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-* Meta External Trigger Controller Binding
-
-This binding specifies what properties must be available in the device tree
-representation of a Meta external trigger controller.
-
-Required properties:
-
-    - compatible: Specifies the compatibility list for the interrupt controller.
-      The type shall be <string> and the value shall include "img,meta-intc".
-
-    - num-banks: Specifies the number of interrupt banks (each of which can
-      handle 32 interrupt sources).
-
-    - interrupt-controller: The presence of this property identifies the node
-      as an interrupt controller. No property value shall be defined.
-
-    - #interrupt-cells: Specifies the number of cells needed to encode an
-      interrupt source. The type shall be a <u32> and the value shall be 2.
-
-    - #address-cells: Specifies the number of cells needed to encode an
-      address. The type shall be <u32> and the value shall be 0. As such,
-      'interrupt-map' nodes do not have to specify a parent unit address.
-
-Optional properties:
-
-    - no-mask: The controller doesn't have any mask registers.
-
-* Interrupt Specifier Definition
-
-  Interrupt specifiers consists of 2 cells encoded as follows:
-
-    - <1st-cell>: The interrupt-number that identifies the interrupt source.
-
-    - <2nd-cell>: The Linux interrupt flags containing level-sense information,
-                  encoded as follows:
-                    1 = edge triggered
-                    4 = level-sensitive
-
-* Examples
-
-Example 1:
-
-	/*
-	 * Meta external trigger block
-	 */
-	intc: intc {
-		// This is an interrupt controller node.
-		interrupt-controller;
-
-		// No address cells so that 'interrupt-map' nodes which
-		// reference this interrupt controller node do not need a parent
-		// address specifier.
-		#address-cells = <0>;
-
-		// Two cells to encode interrupt sources.
-		#interrupt-cells = <2>;
-
-		// Number of interrupt banks
-		num-banks = <2>;
-
-		// No HWMASKEXT is available (specify on Chorus2 and Comet ES1)
-		no-mask;
-
-		// Compatible with Meta hardware trigger block.
-		compatible = "img,meta-intc";
-	};
-
-Example 2:
-
-	/*
-	 * An interrupt generating device that is wired to a Meta external
-	 * trigger block.
-	 */
-	uart1: uart@02004c00 {
-		// Interrupt source '5' that is level-sensitive.
-		// Note that there are only two cells as specified in the
-		// interrupt parent's '#interrupt-cells' property.
-		interrupts = <5 4 /* level */>;
-
-		// The interrupt controller that this device is wired to.
-		interrupt-parent = <&intc>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
deleted file mode 100644
index d4373d0f7121..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Ingenic SoC Interrupt Controller
-
-Required properties:
-
-- compatible : should be "ingenic,<socname>-intc". Valid strings are:
-    ingenic,jz4740-intc
-    ingenic,jz4725b-intc
-    ingenic,jz4770-intc
-    ingenic,jz4775-intc
-    ingenic,jz4780-intc
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-- interrupts : Specifies the CPU interrupt the controller is connected to.
-
-Example:
-
-intc: interrupt-controller@10001000 {
-	compatible = "ingenic,jz4740-intc";
-	reg = <0x10001000 0x14>;
-
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	interrupt-parent = <&cpuintc>;
-	interrupts = <2>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
new file mode 100644
index 000000000000..0358a7739c8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ingenic,intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs interrupt controller devicetree bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: "^interrupt-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-intc
+          - ingenic,jz4760-intc
+          - ingenic,jz4780-intc
+      - items:
+          - enum:
+              - ingenic,jz4775-intc
+              - ingenic,jz4770-intc
+              - ingenic,jz4760b-intc
+          - const: ingenic,jz4760-intc
+      - items:
+          - const: ingenic,x1000-intc
+          - const: ingenic,jz4780-intc
+      - items:
+          - const: ingenic,jz4725b-intc
+          - const: ingenic,jz4740-intc
+
+  "#interrupt-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    intc: interrupt-controller@10001000 {
+      compatible = "ingenic,jz4770-intc", "ingenic,jz4760-intc";
+      reg = <0x10001000 0x40>;
+
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
index 507c141ea760..14dced11877b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
@@ -25,10 +25,10 @@ properties:
   compatible:
     items:
       - enum:
-        - intel,ixp42x-interrupt
-        - intel,ixp43x-interrupt
-        - intel,ixp45x-interrupt
-        - intel,ixp46x-interrupt
+          - intel,ixp42x-interrupt
+          - intel,ixp43x-interrupt
+          - intel,ixp45x-interrupt
+          - intel,ixp46x-interrupt
 
   reg:
     maxItems: 1
@@ -44,6 +44,8 @@ required:
   - interrupt-controller
   - '#interrupt-cells'
 
+additionalProperties: false
+
 examples:
   - |
     intcon: interrupt-controller@c8003000 {
diff --git a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
new file mode 100644
index 000000000000..e8dfa6507f64
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt controller driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+  The following interrupts are available. All types and levels are fixed
+  and handled by the board management controller.
+
+  ==== ============= ==================================
+   IRQ line/device   description
+  ==== ============= ==================================
+    0  RTC_INT#      Interrupt line from on-board RTC
+    1  SMB_ALERT#    Event on SMB_ALERT# line (P1)
+    2  ESPI_ALERT0#  Event on ESPI_ALERT0# line (S43)
+    3  ESPI_ALERT1#  Event on ESPI_ALERT1# line (S44)
+    4  PWR_BTN#      Event on PWR_BTN# line (P128)
+    5  SLEEP#        Event on SLEEP# line (S149)
+    6  watchdog      Interrupt of the internal watchdog
+    7  n/a           not used
+  ==== ============= ==================================
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
new file mode 100644
index 000000000000..d6bc1a687fc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/loongson,htpic.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson-3 HyperTransport Interrupt Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description: |
+  This interrupt controller is found in the Loongson-3 family of chips to transmit
+  interrupts from PCH PIC connected on HyperTransport bus.
+
+properties:
+  compatible:
+    const: loongson,htpic-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description: |
+      Four parent interrupts that receive chained interrupts.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    htintc: interrupt-controller@1fb000080 {
+      compatible = "loongson,htpic-1.0";
+      reg = <0xfb000080 0x40>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&liointc>;
+      interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+                    <25 IRQ_TYPE_LEVEL_HIGH>,
+                    <26 IRQ_TYPE_LEVEL_HIGH>,
+                    <27 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml
new file mode 100644
index 000000000000..87a74558204f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/loongson,htvec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson-3 HyperTransport Interrupt Vector Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description:
+  This interrupt controller is found in the Loongson-3 family of chips for
+  receiving vectorized interrupts from PCH's interrupt controller.
+
+properties:
+  compatible:
+    const: loongson,htvec-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description: Eight parent interrupts that receive chained interrupts.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    htvec: interrupt-controller@fb000080 {
+      compatible = "loongson,htvec-1.0";
+      reg = <0xfb000080 0x40>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&liointc>;
+      interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+                    <25 IRQ_TYPE_LEVEL_HIGH>,
+                    <26 IRQ_TYPE_LEVEL_HIGH>,
+                    <27 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
new file mode 100644
index 000000000000..750cc44628e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/loongson,liointc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson Local I/O Interrupt Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |
+  This interrupt controller is found in the Loongson-3 family of chips and
+  Loongson-2K1000 chip, as the primary package interrupt controller which
+  can route local I/O interrupt to interrupt lines of cores.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,liointc-1.0
+      - loongson,liointc-1.0a
+      - loongson,liointc-2.0
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: main
+      - const: isr0
+      - const: isr1
+
+  interrupt-controller: true
+
+  interrupts:
+    description:
+      Interrupt source of the CPU interrupts.
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    description: List of names for the parent interrupts.
+    items:
+      - const: int0
+      - const: int1
+      - const: int2
+      - const: int3
+    minItems: 1
+
+  '#interrupt-cells':
+    const: 2
+
+  'loongson,parent_int_map':
+    description: |
+      This property points how the children interrupts will be mapped into CPU
+      interrupt lines. Each cell refers to a parent interrupt line from 0 to 3
+      and each bit in the cell refers to a child interrupt from 0 to 31.
+      If a CPU interrupt line didn't connect with liointc, then keep its
+      cell with zero.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - 'loongson,parent_int_map'
+
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - loongson,liointc-2.0
+
+then:
+  properties:
+    reg:
+      minItems: 3
+
+  required:
+    - reg-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+examples:
+  - |
+    iointc: interrupt-controller@3ff01400 {
+      compatible = "loongson,liointc-1.0";
+      reg = <0x3ff01400 0x64>;
+
+      interrupt-controller;
+      #interrupt-cells = <2>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>, <3>;
+      interrupt-names = "int0", "int1";
+
+      loongson,parent_int_map = <0xf0ffffff>, /* int0 */
+                                <0x0f000000>, /* int1 */
+                                <0x00000000>, /* int2 */
+                                <0x00000000>; /* int3 */
+
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
new file mode 100644
index 000000000000..1f6fd73d4624
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/loongson,pch-msi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson PCH MSI Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description:
+  This interrupt controller is found in the Loongson LS7A family of PCH for
+  transforming interrupts from PCIe MSI into HyperTransport vectorized
+  interrupts.
+
+properties:
+  compatible:
+    const: loongson,pch-msi-1.0
+
+  reg:
+    maxItems: 1
+
+  loongson,msi-base-vec:
+    description:
+      u32 value of the base of parent HyperTransport vector allocated
+      to PCH MSI.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 255
+
+  loongson,msi-num-vecs:
+    description:
+      u32 value of the number of parent HyperTransport vectors allocated
+      to PCH MSI.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 1
+    maximum: 256
+
+  msi-controller: true
+
+required:
+  - compatible
+  - reg
+  - msi-controller
+  - loongson,msi-base-vec
+  - loongson,msi-num-vecs
+
+additionalProperties: true #fixme
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    msi: msi-controller@2ff00000 {
+      compatible = "loongson,pch-msi-1.0";
+      reg = <0x2ff00000 0x4>;
+      msi-controller;
+      loongson,msi-base-vec = <64>;
+      loongson,msi-num-vecs = <64>;
+      interrupt-parent = <&htvec>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
new file mode 100644
index 000000000000..fdd6a38a31db
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/loongson,pch-pic.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson PCH PIC Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description:
+  This interrupt controller is found in the Loongson LS7A family of PCH for
+  transforming interrupts from on-chip devices into HyperTransport vectorized
+  interrupts.
+
+properties:
+  compatible:
+    const: loongson,pch-pic-1.0
+
+  reg:
+    maxItems: 1
+
+  loongson,pic-base-vec:
+    description:
+      u32 value of the base of parent HyperTransport vector allocated
+      to PCH PIC.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 192
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - loongson,pic-base-vec
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pic: interrupt-controller@10000000 {
+      compatible = "loongson,pch-pic-1.0";
+      reg = <0x10000000 0x400>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      loongson,pic-base-vec = <64>;
+      interrupt-parent = <&htvec>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml
new file mode 100644
index 000000000000..50003880ee6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,eic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip External Interrupt Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  This interrupt controller is found in Microchip SoCs (SAMA7G5) and provides
+  support for handling up to 2 external interrupt lines.
+
+properties:
+  compatible:
+    enum:
+      - microchip,sama7g5-eic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the input IRQ number (between 0 and 1), the second cell
+      is the trigger type as defined in interrupt.txt present in this directory.
+
+  interrupts:
+    description: |
+      Contains the GIC SPI IRQs mapped to the external interrupt lines. They
+      should be specified sequentially from output 0 to output 1.
+    minItems: 2
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    eic: interrupt-controller@e1628000 {
+      compatible = "microchip,sama7g5-eic";
+      reg = <0xe1628000 0x100>;
+      interrupt-parent = <&gic>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+      clock-names = "pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
deleted file mode 100644
index 173595305e26..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-MIPS Global Interrupt Controller (GIC)
-
-The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
-It also supports local (per-processor) interrupts and software-generated
-interrupts which can be used as IPIs.  The GIC also includes a free-running
-global timer, per-CPU count/compare timers, and a watchdog.
-
-Required properties:
-- compatible : Should be "mti,gic".
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt specifier.  Should be 3.
-  - The first cell is the type of interrupt, local or shared.
-    See <include/dt-bindings/interrupt-controller/mips-gic.h>.
-  - The second cell is the GIC interrupt number.
-  - The third cell encodes the interrupt flags.
-    See <include/dt-bindings/interrupt-controller/irq.h> for a list of valid
-    flags.
-
-Optional properties:
-- reg : Base address and length of the GIC registers.  If not present,
-  the base address reported by the hardware GCR_GIC_BASE will be used.
-- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
-  to which the GIC may not route interrupts.  Valid values are 2 - 7.
-  This property is ignored if the CPU is started in EIC mode.
-- mti,reserved-ipi-vectors : Specifies the range of GIC interrupts that are
-  reserved for IPIs.
-  It accepts 2 values, the 1st is the starting interrupt and the 2nd is the size
-  of the reserved range.
-  If not specified, the driver will allocate the last 2 * number of VPEs in the
-  system.
-
-Required properties for timer sub-node:
-- compatible : Should be "mti,gic-timer".
-- interrupts : Interrupt for the GIC local timer.
-
-Optional properties for timer sub-node:
-- clocks : GIC timer operating clock.
-- clock-frequency : Clock frequency at which the GIC timers operate.
-
-Note that one of clocks or clock-frequency must be specified.
-
-Example:
-
-	gic: interrupt-controller@1bdc0000 {
-		compatible = "mti,gic";
-		reg = <0x1bdc0000 0x20000>;
-
-		interrupt-controller;
-		#interrupt-cells = <3>;
-
-		mti,reserved-cpu-vectors = <7>;
-		mti,reserved-ipi-vectors = <40 8>;
-
-		timer {
-			compatible = "mti,gic-timer";
-			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
-			clock-frequency = <50000000>;
-		};
-	};
-
-	uart@18101400 {
-		...
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
-		...
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt
deleted file mode 100644
index a0ed02725a9d..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Marvell MMP Interrupt controller
-
-Required properties:
-- compatible : Should be
-               "mrvl,mmp-intc" on Marvel MMP,
-               "mrvl,mmp2-intc" along with "mrvl,mmp2-mux-intc" on MMP2 or
-               "marvell,mmp3-intc" with "mrvl,mmp2-mux-intc" on MMP3
-- reg : Address and length of the register set of the interrupt controller.
-  If the interrupt controller is intc, address and length means the range
-  of the whole interrupt controller. The "marvell,mmp3-intc" controller
-  also has a secondary range for the second CPU core.  If the interrupt
-  controller is mux-intc, address and length means one register. Since
-  address of mux-intc is in the range of intc. mux-intc is secondary
-  interrupt controller.
-- reg-names : Name of the register set of the interrupt controller. It's
-  only required in mux-intc interrupt controller.
-- interrupts : Should be the port interrupt shared by mux interrupts. It's
-  only required in mux-intc interrupt controller.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source.
-- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt
-  controller.
-- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge
-  detection first.
-
-Example:
-	intc: interrupt-controller@d4282000 {
-		compatible = "mrvl,mmp2-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xd4282000 0x1000>;
-		mrvl,intc-nr-irqs = <64>;
-	};
-
-	intcmux4@d4282150 {
-		compatible = "mrvl,mmp2-mux-intc";
-		interrupts = <4>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x150 0x4>, <0x168 0x4>;
-		reg-names = "mux status", "mux mask";
-		mrvl,intc-nr-irqs = <2>;
-	};
-
-* Marvell Orion Interrupt controller
-
-Required properties
-- compatible :  Should be "marvell,orion-intc".
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. Supported value is <1>.
-- interrupt-controller : Declare this node to be an interrupt controller.
-- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
-        One entry in the list represents 32 interrupts.
-
-Example:
-
-	intc: interrupt-controller {
-        	compatible = "marvell,orion-intc", "marvell,intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-                reg = <0xfed20204 0x04>,
-		      <0xfed20214 0x04>;
-        };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
new file mode 100644
index 000000000000..5a583bf3dbc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP/Orion Interrupt controller bindings
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: marvell,orion-intc
+    then:
+      required:
+        - mrvl,intc-nr-irqs
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mrvl,mmp-intc
+              - mrvl,mmp2-intc
+    then:
+      properties:
+        reg:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,mmp3-intc
+              - mrvl,mmp2-mux-intc
+    then:
+      properties:
+        reg:
+          minItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mrvl,mmp2-mux-intc
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: 'mux status'
+            - const: 'mux mask'
+      required:
+        - interrupts
+    else:
+      properties:
+        interrupts: false
+
+properties:
+  '#interrupt-cells':
+    const: 1
+
+  compatible:
+    enum:
+      - mrvl,mmp-intc
+      - mrvl,mmp2-intc
+      - marvell,mmp3-intc
+      - marvell,orion-intc
+      - mrvl,mmp2-mux-intc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names: true
+
+  interrupts: true
+
+  interrupt-controller: true
+
+  mrvl,intc-nr-irqs:
+    description: |
+      Specifies the number of interrupts in the interrupt controller.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  mrvl,clr-mfp-irq:
+    description: |
+      Specifies the interrupt that needs to clear MFP edge detection first.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - '#interrupt-cells'
+  - compatible
+  - reg
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@d4282000 {
+        compatible = "mrvl,mmp2-intc";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        reg = <0xd4282000 0x1000>;
+        mrvl,intc-nr-irqs = <64>;
+    };
+
+    interrupt-controller@d4282150 {
+        compatible = "mrvl,mmp2-mux-intc";
+        interrupts = <4>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        reg = <0x150 0x4>, <0x168 0x4>;
+        reg-names = "mux status", "mux mask";
+        mrvl,intc-nr-irqs = <2>;
+    };
+  - |
+    interrupt-controller@fed20204 {
+        compatible = "marvell,orion-intc";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        reg = <0xfed20204 0x04>,
+              <0xfed20214 0x04>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
deleted file mode 100644
index f5baeccb689f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Microsemi Ocelot SoC ICPU Interrupt Controller
-
-Required properties:
-
-- compatible : should be "mscc,ocelot-icpu-intr"
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-- interrupts : Specifies the CPU interrupt the controller is connected to.
-
-Example:
-
-		intc: interrupt-controller@70000070 {
-			compatible = "mscc,ocelot-icpu-intr";
-			reg = <0x70000070 0x70>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			interrupt-parent = <&cpuintc>;
-			interrupts = <2>;
-		};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
new file mode 100644
index 000000000000..27b798bfe29b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/mscc,ocelot-icpu-intr.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Microsemi Ocelot SoC ICPU Interrupt Controller
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description: |
+  the Microsemi Ocelot interrupt controller that is part of the
+  ICPU. It is connected directly to the MIPS core interrupt
+  controller.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mscc,jaguar2-icpu-intr
+          - mscc,luton-icpu-intr
+          - mscc,ocelot-icpu-intr
+          - mscc,serval-icpu-intr
+
+
+  '#interrupt-cells':
+    const: 1
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    intc: interrupt-controller@70000070 {
+        compatible = "mscc,ocelot-icpu-intr";
+        reg = <0x70000070 0x70>;
+        #interrupt-cells = <1>;
+        #address-cells = <0>;
+        interrupt-controller;
+        interrupt-parent = <&cpuintc>;
+        interrupts = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/msi-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/msi-controller.yaml
new file mode 100644
index 000000000000..449d6067ec88
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/msi-controller.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/msi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MSI controller
+
+maintainers:
+  - Marc Zyngier <maz@kernel.org>
+
+description: |
+  An MSI controller signals interrupts to a CPU when a write is made
+  to an MMIO address by some master. An MSI controller may feature a
+  number of doorbells.
+
+properties:
+  "#msi-cells":
+    description: |
+      The number of cells in an msi-specifier, required if not zero.
+
+      Typically this will encode information related to sideband data,
+      and will not encode doorbells or payloads as these can be
+      configured dynamically.
+
+      The meaning of the msi-specifier is defined by the device tree
+      binding of the specific MSI controller.
+    enum: [0, 1]
+
+  msi-controller:
+    description:
+      Identifies the node as an MSI controller.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  msi-ranges:
+    description:
+      A list of <phandle intspec span> tuples, where "phandle" is the
+      parent interrupt controller, "intspec" is the starting/base
+      interrupt specifier and "span" is the size of the
+      range. Multiple ranges can be provided.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+dependencies:
+  "#msi-cells": [ msi-controller ]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/interrupt-controller/msi.txt b/Documentation/devicetree/bindings/interrupt-controller/msi.txt
index c60c034dcf19..c20b51df7138 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/msi.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/msi.txt
@@ -98,7 +98,7 @@ Example
 	};
 
 	msi_c: msi-controller@c {
-		reg = <0xb 0xf00>;
+		reg = <0xc 0xf00>;
 		compatible = "vendor-b,another-controller";
 		msi-controller;
 		/* Each device has some unique ID */
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml
new file mode 100644
index 000000000000..bbf0f26cd008
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mstar,mst-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar Interrupt Controller
+
+maintainers:
+  - Mark-PK Tsai <mark-pk.tsai@mediatek.com>
+
+description: |+
+  MStar, SigmaStar and Mediatek TV SoCs contain multiple legacy
+  interrupt controllers that routes interrupts to the GIC.
+
+  The HW block exposes a number of interrupt controllers, each
+  can support up to 64 interrupts.
+
+properties:
+  compatible:
+    const: mstar,mst-intc
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      Use the same format as specified by GIC in arm,gic.yaml.
+
+  reg:
+    maxItems: 1
+
+  mstar,irqs-map-range:
+    description: |
+      The range <start, end> of parent interrupt controller's interrupt
+      lines that are hardwired to mstar interrupt controller.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 2
+      maxItems: 2
+
+  mstar,intc-no-eoi:
+    description:
+      Mark this controller has no End Of Interrupt(EOI) implementation.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - mstar,irqs-map-range
+
+additionalProperties: false
+
+examples:
+  - |
+    mst_intc0: interrupt-controller@1f2032d0 {
+      compatible = "mstar,mst-intc";
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      interrupt-parent = <&gic>;
+      reg = <0x1f2032d0 0x30>;
+      mstar,irqs-map-range = <0 63>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml
new file mode 100644
index 000000000000..46a1f5f54b74
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mti,cpu-interrupt-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS CPU Interrupt Controller
+
+description: >
+   On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
+   IRQs from a devicetree file and create a irq_domain for IRQ controller.
+
+   With the irq_domain in place we can describe how the 8 IRQs are wired to the
+   platforms internal interrupt controller cascade.
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+properties:
+  compatible:
+    const: mti,cpu-interrupt-controller
+
+  '#interrupt-cells':
+    const: 1
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+
+examples:
+  - |
+    interrupt-controller {
+      compatible = "mti,cpu-interrupt-controller";
+      #address-cells = <0>;
+      #interrupt-cells = <1>;
+      interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
new file mode 100644
index 000000000000..91bb3c2307a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mti,gic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Global Interrupt Controller
+
+maintainers:
+  - Paul Burton <paulburton@kernel.org>
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+description: |
+  The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
+  It also supports local (per-processor) interrupts and software-generated
+  interrupts which can be used as IPIs. The GIC also includes a free-running
+  global timer, per-CPU count/compare timers, and a watchdog.
+
+properties:
+  compatible:
+    const: mti,gic
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      The 1st cell is the type of interrupt: local or shared defined in the
+      file 'dt-bindings/interrupt-controller/mips-gic.h'. The 2nd cell is the
+      GIC interrupt number. The 3d cell encodes the interrupt flags setting up
+      the IRQ trigger modes, which are defined in the file
+      'dt-bindings/interrupt-controller/irq.h'.
+
+  reg:
+    description: |
+      Base address and length of the GIC registers space. If not present,
+      the base address reported by the hardware GCR_GIC_BASE will be used.
+    maxItems: 1
+
+  interrupt-controller: true
+
+  mti,reserved-cpu-vectors:
+    description: |
+      Specifies the list of CPU interrupt vectors to which the GIC may not
+      route interrupts. This property is ignored if the CPU is started in EIC
+      mode.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 6
+    uniqueItems: true
+    items:
+      minimum: 2
+      maximum: 7
+
+  mti,reserved-ipi-vectors:
+    description: |
+      Specifies the range of GIC interrupts that are reserved for IPIs.
+      It accepts two values: the 1st is the starting interrupt and the 2nd is
+      the size of the reserved range. If not specified, the driver will
+      allocate the last (2 * number of VPEs in the system).
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - minimum: 0
+        maximum: 254
+      - minimum: 2
+        maximum: 254
+
+  timer:
+    type: object
+    description: |
+      MIPS GIC includes a free-running global timer, per-CPU count/compare
+      timers, and a watchdog. Currently only the GIC Timer is supported.
+    properties:
+      compatible:
+        const: mti,gic-timer
+
+      interrupts:
+        description: |
+          Interrupt for the GIC local timer, so normally it's suppose to be of
+          <GIC_LOCAL X IRQ_TYPE_NONE> format.
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-frequency: true
+
+    required:
+      - compatible
+      - interrupts
+
+    oneOf:
+      - required:
+          - clocks
+      - required:
+          - clock-frequency
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#interrupt-cells"
+  - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    interrupt-controller@1bdc0000 {
+      compatible = "mti,gic";
+      reg = <0x1bdc0000 0x20000>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      mti,reserved-cpu-vectors = <7>;
+      mti,reserved-ipi-vectors = <40 8>;
+
+      timer {
+        compatible = "mti,gic-timer";
+        interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+        clock-frequency = <50000000>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    interrupt-controller@1bdc0000 {
+      compatible = "mti,gic";
+      reg = <0x1bdc0000 0x20000>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+
+      timer {
+        compatible = "mti,gic-timer";
+        interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+        clocks = <&cpu_pll>;
+      };
+    };
+  - |
+    interrupt-controller {
+      compatible = "mti,gic";
+      interrupt-controller;
+      #interrupt-cells = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
new file mode 100644
index 000000000000..9ce6804bdb99
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/nuvoton,wpcm450-aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 Advanced Interrupt Controller bindings
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+
+properties:
+  '#interrupt-cells':
+    const: 2
+
+  compatible:
+    const: nuvoton,wpcm450-aic
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - '#interrupt-cells'
+  - compatible
+  - reg
+  - interrupt-controller
+
+examples:
+  - |
+    aic: interrupt-controller@b8002000 {
+        compatible = "nuvoton,wpcm450-aic";
+        reg = <0xb8002000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
new file mode 100644
index 000000000000..509d20c091af
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,mpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcom MPM Interrupt Controller
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description:
+  Qualcomm Technologies Inc. SoCs based on the RPM architecture have a
+  MSM Power Manager (MPM) that is in always-on domain. In addition to managing
+  resources during sleep, the hardware also has an interrupt controller that
+  monitors the interrupts when the system is asleep, wakes up the APSS when
+  one of these interrupts occur and replays it to GIC interrupt controller
+  after GIC becomes operational.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,mpm
+
+  reg:
+    maxItems: 1
+    description:
+      Specifies the base address and size of vMPM registers in RPM MSG RAM.
+
+  interrupts:
+    maxItems: 1
+    description:
+      Specify the IRQ used by RPM to wakeup APSS.
+
+  mboxes:
+    maxItems: 1
+    description:
+      Specify the mailbox used to notify RPM for writing vMPM registers.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the MPM pin number for the interrupt, and the second
+      is the trigger type.
+
+  qcom,mpm-pin-count:
+    description:
+      Specify the total MPM pin count that a SoC supports.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  qcom,mpm-pin-map:
+    description:
+      A set of MPM pin numbers and the corresponding GIC SPIs.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: MPM pin number
+        - description: GIC SPI number for the MPM pin
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - mboxes
+  - interrupt-controller
+  - '#interrupt-cells'
+  - qcom,mpm-pin-count
+  - qcom,mpm-pin-map
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mpm: interrupt-controller@45f01b8 {
+        compatible = "qcom,mpm";
+        interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+        reg = <0x45f01b8 0x1000>;
+        mboxes = <&apcs_glb 1>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&intc>;
+        qcom,mpm-pin-count = <96>;
+        qcom,mpm-pin-map = <2 275>,
+                           <5 296>,
+                           <12 422>,
+                           <24 79>,
+                           <86 183>,
+                           <90 260>,
+                           <91 260>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
deleted file mode 100644
index 1df293953327..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-PDC interrupt controller
-
-Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a
-Power Domain Controller (PDC) that is on always-on domain. In addition to
-providing power control for the power domains, the hardware also has an
-interrupt controller that can be used to help detect edge low interrupts as
-well detect interrupts when the GIC is non-operational.
-
-GIC is parent interrupt controller at the highest level. Platform interrupt
-controller PDC is next in hierarchy, followed by others. Drivers requiring
-wakeup capabilities of their device interrupts routed through the PDC, must
-specify PDC as their interrupt controller and request the PDC port associated
-with the GIC interrupt. See example below.
-
-Properties:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Should contain "qcom,<soc>-pdc" and "qcom,pdc"
-		    - "qcom,sc7180-pdc": For SC7180
-		    - "qcom,sdm845-pdc": For SDM845
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Specifies the base physical address for PDC hardware.
-
-- interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Specifies the number of cells needed to encode an interrupt
-		    source.
-		    Must be 2.
-		    The first element of the tuple is the PDC pin for the
-		    interrupt.
-		    The second element is the trigger type.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <bool>
-	Definition: Identifies the node as an interrupt controller.
-
-- qcom,pdc-ranges:
-	Usage: required
-	Value type: <u32 array>
-	Definition: Specifies the PDC pin offset and the number of PDC ports.
-		    The tuples indicates the valid mapping of valid PDC ports
-		    and their hwirq mapping.
-		    The first element of the tuple is the starting PDC port.
-		    The second element is the GIC hwirq number for the PDC port.
-		    The third element is the number of interrupts in sequence.
-
-Example:
-
-	pdc: interrupt-controller@b220000 {
-		compatible = "qcom,sdm845-pdc";
-		reg = <0xb220000 0x30000>;
-		qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&intc>;
-		interrupt-controller;
-	};
-
-DT binding of a device that wants to use the GIC SPI 514 as a wakeup
-interrupt, must do -
-
-	wake-device {
-		interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-In this case interrupt 514 would be mapped to port 2 on the PDC as defined by
-the qcom,pdc-ranges property.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
new file mode 100644
index 000000000000..b6f56cf5fbe3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,pdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PDC interrupt controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a
+  Power Domain Controller (PDC) that is on always-on domain. In addition to
+  providing power control for the power domains, the hardware also has an
+  interrupt controller that can be used to help detect edge low interrupts as
+  well detect interrupts when the GIC is non-operational.
+
+  GIC is parent interrupt controller at the highest level. Platform interrupt
+  controller PDC is next in hierarchy, followed by others. Drivers requiring
+  wakeup capabilities of their device interrupts routed through the PDC, must
+  specify PDC as their interrupt controller and request the PDC port associated
+  with the GIC interrupt. See example below.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sc7180-pdc
+          - qcom,sc7280-pdc
+          - qcom,sdm845-pdc
+          - qcom,sm6350-pdc
+          - qcom,sm8150-pdc
+          - qcom,sm8250-pdc
+          - qcom,sm8350-pdc
+      - const: qcom,pdc
+
+  reg:
+    minItems: 1
+    items:
+      - description: PDC base register region
+      - description: Edge or Level config register for SPI interrupts
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  qcom,pdc-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 32 # no hard limit
+    items:
+      items:
+        - description: starting PDC port
+        - description: GIC hwirq number for the PDC port
+        - description: number of interrupts in sequence
+    description: |
+      Specifies the PDC pin offset and the number of PDC ports.
+      The tuples indicates the valid mapping of valid PDC ports
+      and their hwirq mapping.
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - qcom,pdc-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pdc: interrupt-controller@b220000 {
+        compatible = "qcom,sdm845-pdc", "qcom,pdc";
+        reg = <0xb220000 0x30000>;
+        qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&intc>;
+        interrupt-controller;
+    };
+
+    wake-device {
+        interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt
deleted file mode 100644
index e0062aebf025..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-RDA Micro RDA8810PL Interrupt Controller
-
-The interrupt controller in RDA8810PL SoC is a custom interrupt controller
-which supports up to 32 interrupts.
-
-Required properties:
-
-- compatible: Should be "rda,8810pl-intc".
-- reg: Specifies base physical address of the registers set.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 2.
-
-The interrupt sources are as follows:
-
-ID	Name
-------------
-0:	PULSE_DUMMY
-1:	I2C
-2:	NAND_NFSC
-3:	SDMMC1
-4:	SDMMC2
-5:	SDMMC3
-6:	SPI1
-7:	SPI2
-8:	SPI3
-9:	UART1
-10:	UART2
-11:	UART3
-12:	GPIO1
-13:	GPIO2
-14:	GPIO3
-15:	KEYPAD
-16:	TIMER
-17:	TIMEROS
-18:	COMREG0
-19:	COMREG1
-20:	USB
-21:	DMC
-22:	DMA
-23:	CAMERA
-24:	GOUDA
-25:	GPU
-26:	VPU_JPG
-27:	VPU_HOST
-28:	VOC
-29:	AUIFC0
-30:	AUIFC1
-31:	L2CC
-
-Example:
-		apb@20800000 {
-			compatible = "simple-bus";
-			...
-			intc: interrupt-controller@0 {
-				compatible = "rda,8810pl-intc";
-				reg = <0x0 0x1000>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml
new file mode 100644
index 000000000000..96d6285d0087
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/rda,8810pl-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro RDA8810PL interrupt controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: rda,8810pl-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    intc: interrupt-controller@0 {
+      compatible = "rda,8810pl-intc";
+      reg = <0x0 0x1000>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
new file mode 100644
index 000000000000..13a893b18fb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/realtek,rtl-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL SoC interrupt controller devicetree bindings
+
+description:
+  Interrupt controller and router for Realtek MIPS SoCs, allowing each SoC
+  interrupt to be routed to one parent CPU (hardware) interrupt, or left
+  disconnected.
+  All connected input lines from SoC peripherals can be masked individually,
+  and an interrupt status register is present to indicate which interrupts are
+  pending.
+
+maintainers:
+  - Birger Koblitz <mail@birger-koblitz.de>
+  - Bert Vermeulen <bert@biot.com>
+  - John Crispin <john@phrozen.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - realtek,rtl8380-intc
+          - const: realtek,rtl-intc
+      - const: realtek,rtl-intc
+        deprecated: true
+
+  "#interrupt-cells":
+    description:
+      SoC interrupt line index.
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 15
+    description:
+      List of parent interrupts, in the order that they are connected to this
+      interrupt router's outputs, starting at the first output.
+
+  interrupt-controller: true
+
+  interrupt-map:
+    deprecated: true
+    description: Describes mapping from SoC interrupts to CPU interrupts
+
+required:
+  - compatible
+  - reg
+  - "#interrupt-cells"
+  - interrupt-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: realtek,rtl-intc
+    then:
+      properties:
+        "#address-cells":
+          const: 0
+      required:
+        - "#address-cells"
+        - interrupt-map
+    else:
+      required:
+        - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@3000 {
+      compatible = "realtek,rtl8380-intc", "realtek,rtl-intc";
+      #interrupt-cells = <1>;
+      interrupt-controller;
+      reg = <0x3000 0x18>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>, <3>, <4>, <5>, <6>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
deleted file mode 100644
index 56e8d82aff34..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* H8/300H Interrupt controller
-
-Required properties:
-
-- compatible: has to be "renesas,h8300h-intc", "renesas,h8300-intc" as fallback.
-- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
-  interrupts.txt in this directory
-- regs: Base address of interrupt controller registers.
-
-Optional properties:
-
-- any properties, listed in interrupts.txt, and any standard resource allocation
-  properties
-
-Example:
-
-	h8intc: interrupt-controller@fee012 {
-		compatible = "renesas,h8300h-intc", "renesas,h8300-intc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xfee012 7>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
deleted file mode 100644
index faded2b1559b..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* H8S Interrupt controller
-
-Required properties:
-
-- compatible: has to be "renesas,h8s-intc", "renesas,h8300-intc" as fallback.
-- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
-  interrupts.txt in this directory
-- regs: Base address of interrupt controller registers.
-
-Optional properties:
-
-- any properties, listed in interrupts.txt, and any standard resource allocation
-  properties
-
-Example:
-
-	h8intc: interrupt-controller@fffe00 {
-		compatible = "renesas,h8s-intc", "renesas,h8300-intc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xfffe00 24>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
deleted file mode 100644
index 772c550d3b4b..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-DT bindings for the R-/SH-Mobile irqpin controller
-
-Required properties:
-
-- compatible: has to be "renesas,intc-irqpin-<soctype>", "renesas,intc-irqpin"
-  as fallback.
-  Examples with soctypes are:
-    - "renesas,intc-irqpin-r8a7740" (R-Mobile A1)
-    - "renesas,intc-irqpin-r8a7778" (R-Car M1A)
-    - "renesas,intc-irqpin-r8a7779" (R-Car H1)
-    - "renesas,intc-irqpin-sh73a0" (SH-Mobile AG5)
-
-- reg: Base address and length of each register bank used by the external
-  IRQ pins driven by the interrupt controller hardware module. The base
-  addresses, length and number of required register banks varies with soctype.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
-  interrupts.txt in this directory.
-- interrupts: Must contain a list of interrupt specifiers. For each interrupt
-  provided by this irqpin controller instance, there must be one entry,
-  referring to the corresponding parent interrupt.
-
-Optional properties:
-
-- any properties, listed in interrupts.txt, and any standard resource allocation
-  properties
-- sense-bitfield-width: width of a single sense bitfield in the SENSE register,
-  if different from the default 4 bits
-- control-parent: disable and enable interrupts on the parent interrupt
-  controller, needed for some broken implementations
-- clocks: Must contain a reference to the functional clock.  This property is
-  mandatory if the hardware implements a controllable functional clock for
-  the irqpin controller instance.
-- power-domains: Must contain a reference to the power domain. This property is
-  mandatory if the irqpin controller instance is part of a controllable power
-  domain.
-
-
-Example
--------
-
-	irqpin1: interrupt-controller@e6900004 {
-		compatible = "renesas,intc-irqpin-r8a7740",
-			     "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900004 4>,
-			<0xe6900014 4>,
-			<0xe6900024 1>,
-			<0xe6900044 1>,
-			<0xe6900064 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
-		power-domains = <&pd_a4s>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml
new file mode 100644
index 000000000000..f4aae56c6469
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,intc-irqpin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Interrupt Controller (INTC) for external pins
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,intc-irqpin-r8a7740  # R-Mobile A1
+          - renesas,intc-irqpin-r8a7778  # R-Car M1A
+          - renesas,intc-irqpin-r8a7779  # R-Car H1
+          - renesas,intc-irqpin-sh73a0   # SH-Mobile AG5
+      - const: renesas,intc-irqpin
+
+  reg:
+    minItems: 5
+    items:
+      - description: Interrupt control register
+      - description: Interrupt priority register
+      - description: Interrupt source register
+      - description: Interrupt mask register
+      - description: Interrupt mask clear register
+      - description: Interrupt control register for ICR0 with IRLM0 bit
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  sense-bitfield-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 4]
+    default: 4
+    description:
+      Width of a single sense bitfield in the SENSE register, if different from the
+      default.
+
+  control-parent:
+    type: boolean
+    description:
+      Disable and enable interrupts on the parent interrupt controller, needed for some
+      broken implementations.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,intc-irqpin-r8a7740
+          - renesas,intc-irqpin-sh73a0
+then:
+  required:
+    - clocks
+    - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7740-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    irqpin1: interrupt-controller@e6900004 {
+        compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
+        reg = <0xe6900004 4>,
+              <0xe6900014 4>,
+              <0xe6900024 1>,
+              <0xe6900044 1>,
+              <0xe6900064 1>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+        power-domains = <&pd_a4s>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
index ee5273b6c5a3..62fd47c88275 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
@@ -14,6 +14,7 @@ properties:
     items:
       - enum:
           - renesas,irqc-r8a73a4        # R-Mobile APE6
+          - renesas,irqc-r8a7742        # RZ/G1H
           - renesas,irqc-r8a7743        # RZ/G1M
           - renesas,irqc-r8a7744        # RZ/G1N
           - renesas,irqc-r8a7745        # RZ/G1E
@@ -26,13 +27,17 @@ properties:
           - renesas,intc-ex-r8a774a1    # RZ/G2M
           - renesas,intc-ex-r8a774b1    # RZ/G2N
           - renesas,intc-ex-r8a774c0    # RZ/G2E
+          - renesas,intc-ex-r8a774e1    # RZ/G2H
           - renesas,intc-ex-r8a7795     # R-Car H3
           - renesas,intc-ex-r8a7796     # R-Car M3-W
+          - renesas,intc-ex-r8a77961    # R-Car M3-W+
           - renesas,intc-ex-r8a77965    # R-Car M3-N
           - renesas,intc-ex-r8a77970    # R-Car V3M
           - renesas,intc-ex-r8a77980    # R-Car V3H
           - renesas,intc-ex-r8a77990    # R-Car E3
           - renesas,intc-ex-r8a77995    # R-Car D3
+          - renesas,intc-ex-r8a779a0    # R-Car V3U
+          - renesas,intc-ex-r8a779g0    # R-Car V4H
       - const: renesas,irqc
 
   '#interrupt-cells':
@@ -78,7 +83,7 @@ examples:
         compatible = "renesas,irqc-r8a7790", "renesas,irqc";
         #interrupt-cells = <2>;
         interrupt-controller;
-        reg = <0 0xe61c0000 0 0x200>;
+        reg = <0xe61c0000 0x200>;
         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.txt
deleted file mode 100644
index 727b7e4cd6e0..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-DT bindings for the Renesas RZ/A1 Interrupt Controller
-
-The RZ/A1 Interrupt Controller is a front-end for the GIC found on Renesas
-RZ/A1 and RZ/A2 SoCs:
-  - IRQ sense select for 8 external interrupts, 1:1-mapped to 8 GIC SPI
-    interrupts,
-  - NMI edge select.
-
-Required properties:
-  - compatible: Must be "renesas,<soctype>-irqc", and "renesas,rza1-irqc" as
-		fallback.
-		Examples with soctypes are:
-		  - "renesas,r7s72100-irqc" (RZ/A1H)
-		  - "renesas,r7s9210-irqc" (RZ/A2M)
-  - #interrupt-cells: Must be 2 (an interrupt index and flags, as defined
-				 in interrupts.txt in this directory)
-  - #address-cells: Must be zero
-  - interrupt-controller: Marks the device as an interrupt controller
-  - reg: Base address and length of the memory resource used by the interrupt
-         controller
-  - interrupt-map: Specifies the mapping from external interrupts to GIC
-		   interrupts
-  - interrupt-map-mask: Must be <7 0>
-
-Example:
-
-	irqc: interrupt-controller@fcfef800 {
-		compatible = "renesas,r7s72100-irqc", "renesas,rza1-irqc";
-		#interrupt-cells = <2>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0xfcfef800 0x6>;
-		interrupt-map =
-			<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-			<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-			<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-			<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-			<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-			<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-			<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-			<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-map-mask = <7 0>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.yaml
new file mode 100644
index 000000000000..755cdfabfcd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,rza1-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A1 Interrupt Controller
+
+maintainers:
+  - Chris Brandt <chris.brandt@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  The RZ/A1 Interrupt Controller is a front-end for the GIC found on Renesas RZ/A1 and
+  RZ/A2 SoCs:
+    - IRQ sense select for 8 external interrupts, 1:1-mapped to 8 GIC SPI interrupts,
+    - NMI edge select.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r7s72100-irqc # RZ/A1H
+          - renesas,r7s9210-irqc  # RZ/A2M
+      - const: renesas,rza1-irqc
+
+  '#interrupt-cells':
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupt-map:
+    maxItems: 8
+    description: Specifies the mapping from external interrupts to GIC interrupts.
+
+  interrupt-map-mask:
+    items:
+      - const: 7
+      - const: 0
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupt-map
+  - interrupt-map-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    irqc: interrupt-controller@fcfef800 {
+            compatible = "renesas,r7s72100-irqc", "renesas,rza1-irqc";
+            #interrupt-cells = <2>;
+            #address-cells = <0>;
+            interrupt-controller;
+            reg = <0xfcfef800 0x6>;
+            interrupt-map =
+                    <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                    <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                    <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                    <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                    <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                    <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                    <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                    <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-map-mask = <7 0>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
new file mode 100644
index 000000000000..33b90e975e33
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55)
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  IA55 performs various interrupt controls including synchronization for the external
+  interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral
+  interrupts output by each IP. And it notifies the interrupt to the GIC
+    - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
+    - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts
+    - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
+      stand-up edge detection interrupts)
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
+          - renesas,r9a07g054-irqc    # RZ/V2L
+      - const: renesas,rzg2l-irqc
+
+  '#interrupt-cells':
+    description: The first cell should contain external interrupt number (IRQ0-7) and the
+                 second cell is used to specify the flag.
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 41
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    irqc: interrupt-controller@110a0000 {
+            compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
+            reg = <0x110a0000 0x10000>;
+            #interrupt-cells = <2>;
+            #address-cells = <0>;
+            interrupt-controller;
+            interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+                     <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+            clock-names = "clk", "pclk";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_IA55_RESETN>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt
deleted file mode 100644
index 19af687858a1..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Samsung Exynos Interrupt Combiner Controller
-
-Samsung's Exynos4 architecture includes a interrupt combiner controller which
-can combine interrupt sources as a group and provide a single interrupt request
-for the group. The interrupt request from each group are connected to a parent
-interrupt controller, such as GIC in case of Exynos4210.
-
-The interrupt combiner controller consists of multiple combiners. Up to eight
-interrupt sources can be connected to a combiner. The combiner outputs one
-combined interrupt for its eight interrupt sources. The combined interrupt
-is usually connected to a parent interrupt controller.
-
-A single node in the device tree is used to describe the interrupt combiner
-controller module (which includes multiple combiners). A combiner in the
-interrupt controller module shares config/control registers with other
-combiners. For example, a 32-bit interrupt enable/disable config register
-can accommodate up to 4 interrupt combiners (with each combiner supporting
-up to 8 interrupt sources).
-
-Required properties:
-- compatible: should be "samsung,exynos4210-combiner".
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: should be <2>. The meaning of the cells are
-	* First Cell: Combiner Group Number.
-	* Second Cell: Interrupt number within the group.
-- reg: Base address and size of interrupt combiner registers.
-- interrupts: The list of interrupts generated by the combiners which are then
-    connected to a parent interrupt controller. The format of the interrupt
-    specifier depends in the interrupt parent controller.
-
-Optional properties:
-- samsung,combiner-nr: The number of interrupt combiners supported. If this
-  property is not specified, the default number of combiners is assumed
-  to be 16.
-
-
-Example:
-
-	The following is a an example from the Exynos4210 SoC dtsi file.
-
-	combiner:interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		reg = <0x10440000 0x1000>;
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
new file mode 100644
index 000000000000..72456a07dac9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/samsung,exynos4210-combiner.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Interrupt Combiner Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  Samsung's Exynos4 architecture includes a interrupt combiner controller which
+  can combine interrupt sources as a group and provide a single interrupt
+  request for the group. The interrupt request from each group are connected to
+  a parent interrupt controller, such as GIC in case of Exynos4210.
+
+  The interrupt combiner controller consists of multiple combiners. Up to eight
+  interrupt sources can be connected to a combiner. The combiner outputs one
+  combined interrupt for its eight interrupt sources. The combined interrupt is
+  usually connected to a parent interrupt controller.
+
+  A single node in the device tree is used to describe the interrupt combiner
+  controller module (which includes multiple combiners). A combiner in the
+  interrupt controller module shares config/control registers with other
+  combiners. For example, a 32-bit interrupt enable/disable config register can
+  accommodate up to 4 interrupt combiners (with each combiner supporting up to
+  8 interrupt sources).
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: samsung,exynos4210-combiner
+
+  interrupt-controller: true
+
+  interrupts:
+    minItems: 8
+    maxItems: 32
+
+  "#interrupt-cells":
+    description: |
+      The meaning of the cells are:
+        * First Cell: Combiner Group Number.
+        * Second Cell: Interrupt number within the group.
+    const: 2
+
+  reg:
+    maxItems: 1
+
+  samsung,combiner-nr:
+    description: |
+      The number of interrupt combiners supported.  Should match number
+      of interrupts set in "interrupts" property.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8
+    maximum: 32
+    default: 16
+
+required:
+  - compatible
+  - interrupt-controller
+  - interrupts
+  - "#interrupt-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@10440000 {
+        compatible = "samsung,exynos4210-combiner";
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        reg = <0x10440000 0x1000>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt
deleted file mode 100644
index 6adf7a6e8825..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-SiFive Platform-Level Interrupt Controller (PLIC)
--------------------------------------------------
-
-SiFive SOCs include an implementation of the Platform-Level Interrupt Controller
-(PLIC) high-level specification in the RISC-V Privileged Architecture
-specification.  The PLIC connects all external interrupts in the system to all
-hart contexts in the system, via the external interrupt source in each hart.
-
-A hart context is a privilege mode in a hardware execution thread.  For example,
-in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
-privilege modes per hart; machine mode and supervisor mode.
-
-Each interrupt can be enabled on per-context basis.  Any context can claim
-a pending enabled interrupt and then release it once it has been handled.
-
-Each interrupt has a configurable priority.  Higher priority interrupts are
-serviced first.  Each context can specify a priority threshold. Interrupts
-with priority below this threshold will not cause the PLIC to raise its
-interrupt line leading to the context.
-
-While the PLIC supports both edge-triggered and level-triggered interrupts,
-interrupt handlers are oblivious to this distinction and therefore it is not
-specified in the PLIC device-tree binding.
-
-While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
-"sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
-contains a specific memory layout, which is documented in chapter 8 of the
-SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
-
-Required properties:
-- compatible : "sifive,plic-1.0.0" and a string identifying the actual
-  detailed implementation in case that specific bugs need to be worked around.
-- #address-cells : should be <0> or more.
-- #interrupt-cells : should be <1> or more.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- reg : Should contain 1 register range (address and length).
-- interrupts-extended : Specifies which contexts are connected to the PLIC,
-  with "-1" specifying that a context is not present.  Each node pointed
-  to should be a riscv,cpu-intc node, which has a riscv node as parent.
-- riscv,ndev: Specifies how many external interrupts are supported by
-  this controller.
-
-Example:
-
-	plic: interrupt-controller@c000000 {
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		compatible = "sifive,plic-1.0.0", "sifive,fu540-c000-plic";
-		interrupt-controller;
-		interrupts-extended = <
-			&cpu0-intc 11
-			&cpu1-intc 11 &cpu1-intc 9
-			&cpu2-intc 11 &cpu2-intc 9
-			&cpu3-intc 11 &cpu3-intc 9
-			&cpu4-intc 11 &cpu4-intc 9>;
-		reg = <0xc000000 0x4000000>;
-		riscv,ndev = <10>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
new file mode 100644
index 000000000000..99e01f4d0a69
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sifive,plic-1.0.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Platform-Level Interrupt Controller (PLIC)
+
+description:
+  SiFive SoCs and other RISC-V SoCs include an implementation of the
+  Platform-Level Interrupt Controller (PLIC) high-level specification in
+  the RISC-V Privileged Architecture specification. The PLIC connects all
+  external interrupts in the system to all hart contexts in the system, via
+  the external interrupt source in each hart.
+
+  A hart context is a privilege mode in a hardware execution thread. For example,
+  in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
+  privilege modes per hart; machine mode and supervisor mode.
+
+  Each interrupt can be enabled on per-context basis. Any context can claim
+  a pending enabled interrupt and then release it once it has been handled.
+
+  Each interrupt has a configurable priority. Higher priority interrupts are
+  serviced first.  Each context can specify a priority threshold. Interrupts
+  with priority below this threshold will not cause the PLIC to raise its
+  interrupt line leading to the context.
+
+  The PLIC supports both edge-triggered and level-triggered interrupts. For
+  edge-triggered interrupts, the RISC-V PLIC spec allows two responses to edges
+  seen while an interrupt handler is active; the PLIC may either queue them or
+  ignore them. In the first case, handlers are oblivious to the trigger type, so
+  it is not included in the interrupt specifier. In the second case, software
+  needs to know the trigger type, so it can reorder the interrupt flow to avoid
+  missing interrupts. This special handling is needed by at least the Renesas
+  RZ/Five SoC (AX45MP AndesCore with a NCEPLIC100) and the T-HEAD C900 PLIC.
+
+  While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
+  "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
+  contains a specific memory layout, which is documented in chapter 8 of the
+  SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
+
+  The thead,c900-plic is different from sifive,plic-1.0.0 in opensbi, the
+  T-HEAD PLIC implementation requires setting a delegation bit to allow access
+  from S-mode. So add thead,c900-plic to distinguish them.
+
+maintainers:
+  - Sagar Kadam <sagar.kadam@sifive.com>
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+  - Palmer Dabbelt <palmer@dabbelt.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-plic
+          - const: andestech,nceplic100
+      - items:
+          - enum:
+              - sifive,fu540-c000-plic
+              - starfive,jh7100-plic
+              - canaan,k210-plic
+          - const: sifive,plic-1.0.0
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-plic
+          - const: thead,c900-plic
+      - items:
+          - const: sifive,plic-1.0.0
+          - const: riscv,plic0
+        deprecated: true
+        description: For the QEMU virt machine only
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 0
+
+  '#interrupt-cells': true
+
+  interrupt-controller: true
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 15872
+    description:
+      Specifies which contexts are connected to the PLIC, with "-1" specifying
+      that a context is not present. Each node pointed to should be a
+      riscv,cpu-intc node, which has a riscv node as parent.
+
+  riscv,ndev:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description:
+      Specifies how many external interrupts are supported by this controller.
+
+  clocks: true
+
+  power-domains: true
+
+  resets: true
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+  - interrupts-extended
+  - riscv,ndev
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - andestech,nceplic100
+              - thead,c900-plic
+
+    then:
+      properties:
+        '#interrupt-cells':
+          const: 2
+
+    else:
+      properties:
+        '#interrupt-cells':
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043-plic
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        power-domains:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+      required:
+        - clocks
+        - power-domains
+        - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    plic: interrupt-controller@c000000 {
+      #address-cells = <0>;
+      #interrupt-cells = <1>;
+      compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
+      interrupt-controller;
+      interrupts-extended = <&cpu0_intc 11>,
+                            <&cpu1_intc 11>, <&cpu1_intc 9>,
+                            <&cpu2_intc 11>, <&cpu2_intc 9>,
+                            <&cpu3_intc 11>, <&cpu3_intc 9>,
+                            <&cpu4_intc 11>, <&cpu4_intc 9>;
+      reg = <0xc000000 0x4000000>;
+      riscv,ndev = <10>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt
deleted file mode 100644
index 355c18a3a4d3..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Sigma Designs SMP86xx/SMP87xx secondary interrupt controller
-
-Required properties:
-- compatible: should be "sigma,smp8642-intc"
-- reg: physical address of MMIO region
-- ranges: address space mapping of child nodes
-- interrupt-controller: boolean
-- #address-cells: should be <1>
-- #size-cells: should be <1>
-
-One child node per control block with properties:
-- reg: address of registers for this control block
-- interrupt-controller: boolean
-- #interrupt-cells: should be <2>, interrupt index and flags per interrupts.txt
-- interrupts: interrupt spec of primary interrupt controller
-
-Example:
-
-interrupt-controller@6e000 {
-	compatible = "sigma,smp8642-intc";
-	reg = <0x6e000 0x400>;
-	ranges = <0x0 0x6e000 0x400>;
-	interrupt-parent = <&gic>;
-	interrupt-controller;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	irq0: interrupt-controller@0 {
-		reg = <0x000 0x100>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	irq1: interrupt-controller@100 {
-		reg = <0x100 0x100>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	irq2: interrupt-controller@300 {
-		reg = <0x300 0x100>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
index 086ff08322db..2db59df9408f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
@@ -2,7 +2,8 @@ Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
 
 Synopsys DesignWare provides interrupt controller IP for APB known as
 dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
-APB bus, e.g. Marvell Armada 1500.
+APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt
+controller in some SoCs, e.g. Hisilicon SD5203.
 
 Required properties:
 - compatible: shall be "snps,dw-apb-ictl"
@@ -10,6 +11,8 @@ Required properties:
   region starting with ENABLE_LOW register
 - interrupt-controller: identifies the node as an interrupt controller
 - #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
+
+Additional required property when it's used as secondary interrupt controller:
 - interrupts: interrupt reference to primary interrupt controller
 
 The interrupt sources map to the corresponding bits in the interrupt
@@ -21,6 +24,7 @@ registers, i.e.
 - (optional) fast interrupts start at 64.
 
 Example:
+	/* dw_apb_ictl is used as secondary interrupt controller */
 	aic: interrupt-controller@3000 {
 		compatible = "snps,dw-apb-ictl";
 		reg = <0x3000 0xc00>;
@@ -29,3 +33,11 @@ Example:
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 	};
+
+	/* dw_apb_ictl is used as primary interrupt controller */
+	vic: interrupt-controller@10130000 {
+		compatible = "snps,dw-apb-ictl";
+		reg = <0x10130000 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt
deleted file mode 100644
index 48e71d3ac2ad..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-UniPhier AIDET
-
-UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC (Generic
-Interrupt Controller).  GIC itself can handle only high level and rising edge
-interrupts.  The AIDET provides logic inverter to support low level and falling
-edge interrupts.
-
-Required properties:
-- compatible: Should be one of the following:
-    "socionext,uniphier-ld4-aidet"  - for LD4 SoC
-    "socionext,uniphier-pro4-aidet" - for Pro4 SoC
-    "socionext,uniphier-sld8-aidet" - for sLD8 SoC
-    "socionext,uniphier-pro5-aidet" - for Pro5 SoC
-    "socionext,uniphier-pxs2-aidet" - for PXs2/LD6b SoC
-    "socionext,uniphier-ld11-aidet" - for LD11 SoC
-    "socionext,uniphier-ld20-aidet" - for LD20 SoC
-    "socionext,uniphier-pxs3-aidet" - for PXs3 SoC
-- reg: Specifies offset and length of the register set for the device.
-- interrupt-controller: Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an interrupt
-  source.  The value should be 2.  The first cell defines the interrupt number
-  (corresponds to the SPI interrupt number of GIC).  The second cell specifies
-  the trigger type as defined in interrupts.txt in this directory.
-
-Example:
-
-	aidet: aidet@5fc20000 {
-		compatible = "socionext,uniphier-pro4-aidet";
-		reg = <0x5fc20000 0x200>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
new file mode 100644
index 000000000000..de7c5e59bae1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/socionext,uniphier-aidet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier AIDET
+
+description: |
+  UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC
+  (Generic Interrupt Controller). GIC itself can handle only high level and
+  rising edge interrupts. The AIDET provides logic inverter to support low
+  level and falling edge interrupts.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-ld4-aidet
+      - socionext,uniphier-pro4-aidet
+      - socionext,uniphier-sld8-aidet
+      - socionext,uniphier-pro5-aidet
+      - socionext,uniphier-pxs2-aidet
+      - socionext,uniphier-ld6b-aidet
+      - socionext,uniphier-ld11-aidet
+      - socionext,uniphier-ld20-aidet
+      - socionext,uniphier-pxs3-aidet
+      - socionext,uniphier-nx1-aidet
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: |
+      The first cell defines the interrupt number (corresponds to the SPI
+      interrupt number of GIC). The second cell specifies the trigger type as
+      defined in interrupts.txt in this directory.
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@5fc20000 {
+        compatible = "socionext,uniphier-pro4-aidet";
+        reg = <0x5fc20000 0x200>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
index 9e5c6608b4e3..00c10a8258f1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
@@ -4,23 +4,24 @@
 $id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STM32 External Interrupt Controller Device Tree Bindings
+title: STM32 External Interrupt Controller
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
-  - Ludovic Barre <ludovic.barre@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Ludovic Barre <ludovic.barre@foss.st.com>
 
 properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - st,stm32-exti
-          - st,stm32h7-exti
+          - enum:
+              - st,stm32-exti
+              - st,stm32h7-exti
       - items:
-        - enum:
-          - st,stm32mp1-exti
-        - const: syscon
+          - enum:
+              - st,stm32mp1-exti
+              - st,stm32mp13-exti
+          - const: syscon
 
   "#interrupt-cells":
     const: 2
@@ -36,6 +37,8 @@ properties:
       Reference to a phandle of a hardware spinlock provider node.
 
   interrupts:
+    minItems: 1
+    maxItems: 96
     description:
       Interrupts references to primary interrupt controller
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
new file mode 100644
index 000000000000..bd0021dbab0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sunplus,sp7021-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Interrupt Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    items:
+      - const: sunplus,sp7021-intc
+
+  reg:
+    maxItems: 2
+    description:
+      Specifies base physical address(s) and size of the controller regs.
+      The 1st region include type/polarity/priority/mask regs.
+      The 2nd region include clear/masked_ext0/masked_ext1/group regs.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger
+      type as defined in interrupt.txt in this directory.
+
+  interrupts:
+    maxItems: 2
+    description:
+      EXT_INT0 & EXT_INT1, 2 interrupts references to primary interrupt
+      controller.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    intc: interrupt-controller@9c000780 {
+        compatible = "sunplus,sp7021-intc";
+        reg = <0x9c000780 0x80>, <0x9c000a80 0x80>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt
deleted file mode 100644
index ee3f9c351501..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-C6X Interrupt Chips
--------------------
-
-* C64X+ Core Interrupt Controller
-
-  The core interrupt controller provides 16 prioritized interrupts to the
-  C64X+ core. Priority 0 and 1 are used for reset and NMI respectively.
-  Priority 2 and 3 are reserved. Priority 4-15 are used for interrupt
-  sources coming from outside the core.
-
-  Required properties:
-  --------------------
-  - compatible: Should be "ti,c64x+core-pic";
-  - #interrupt-cells: <1>
-
-  Interrupt Specifier Definition
-  ------------------------------
-  Single cell specifying the core interrupt priority level (4-15) where
-  4 is highest priority and 15 is lowest priority.
-
-  Example
-  -------
-  core_pic: interrupt-controller@0 {
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	compatible = "ti,c64x+core-pic";
-  };
-
-
-
-* C64x+ Megamodule Interrupt Controller
-
-  The megamodule PIC consists of four interrupt mupliplexers each of which
-  combine up to 32 interrupt inputs into a single interrupt output which
-  may be cascaded into the core interrupt controller. The megamodule PIC
-  has a total of 12 outputs cascading into the core interrupt controller.
-  One for each core interrupt priority level. In addition to the combined
-  interrupt sources, individual megamodule interrupts may be cascaded to
-  the core interrupt controller. When an individual interrupt is cascaded,
-  it is no longer handled through a megamodule interrupt combiner and is
-  considered to have the core interrupt controller as the parent.
-
-  Required properties:
-  --------------------
-  - compatible: "ti,c64x+megamod-pic"
-  - interrupt-controller
-  - #interrupt-cells: <1>
-  - reg: base address and size of register area
-  - interrupts: This should have four cells; one for each interrupt combiner.
-                The cells contain the core priority interrupt to which the
-                corresponding combiner output is wired.
-
-  Optional properties:
-  --------------------
-  - ti,c64x+megamod-pic-mux: Array of 12 cells correspnding to the 12 core
-                             priority interrupts. The first cell corresponds to
-                             core priority 4 and the last cell corresponds to
-                             core priority 15. The value of each cell is the
-                             megamodule interrupt source which is MUXed to
-                             the core interrupt corresponding to the cell
-                             position. Allowed values are 4 - 127. Mapping for
-                             interrupts 0 - 3 (combined interrupt sources) are
-                             ignored.
-
-  Interrupt Specifier Definition
-  ------------------------------
-  Single cell specifying the megamodule interrupt source (4-127). Note that
-  interrupts mapped directly to the core with "ti,c64x+megamod-pic-mux" will
-  use the core interrupt controller as their parent and the specifier will
-  be the core priority level, not the megamodule interrupt number.
-
-  Examples
-  --------
-  megamod_pic: interrupt-controller@1800000 {
-	compatible = "ti,c64x+megamod-pic";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	reg = <0x1800000 0x1000>;
-	interrupt-parent = <&core_pic>;
-	interrupts = < 12 13 14 15 >;
-  };
-
-  This is a minimal example where all individual interrupts go through a
-  combiner. Combiner-0 is mapped to core interrupt 12, combiner-1 is mapped
-  to interrupt 13, etc.
-
-
-  megamod_pic: interrupt-controller@1800000 {
-	compatible = "ti,c64x+megamod-pic";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	reg = <0x1800000 0x1000>;
-	interrupt-parent = <&core_pic>;
-	interrupts = < 12 13 14 15 >;
-	ti,c64x+megamod-pic-mux = <  0  0  0  0
-                                    32  0  0  0
-                                     0  0  0  0 >;
-  };
-
-  This the same as the first example except that megamodule interrupt 32 is
-  mapped directly to core priority interrupt 8. The node using this interrupt
-  must set the core controller as its interrupt parent and use 8 in the
-  interrupt specifier value.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
new file mode 100644
index 000000000000..65523d9459d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI PRU-ICSS Local Interrupt Controller
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  Each PRU-ICSS has a single interrupt controller instance that is common
+  to all the PRU cores. Most interrupt controllers can route 64 input events
+  which are then mapped to 10 possible output interrupts through two levels
+  of mapping. The input events can be triggered by either the PRUs and/or
+  various other PRUSS internal and external peripherals. The first 2 output
+  interrupts (0, 1) are fed exclusively to the internal PRU cores, with the
+  remaining 8 (2 through 9) connected to external interrupt controllers
+  including the MPU and/or other PRUSS instances, DSPs or devices.
+
+  The property "ti,irqs-reserved" is used for denoting the connection
+  differences on the output interrupts 2 through 9. If this property is not
+  defined, it implies that all the PRUSS INTC output interrupts 2 through 9
+  (host_intr0 through host_intr7) are connected exclusively to the Arm interrupt
+  controller.
+
+  The K3 family of SoCs can handle 160 input events that can be mapped to 20
+  different possible output interrupts. The additional output interrupts (10
+  through 19) are connected to new sub-modules within the ICSSG instances.
+
+  This interrupt-controller node should be defined as a child node of the
+  corresponding PRUSS node. The node should be named "interrupt-controller".
+
+properties:
+  $nodename:
+    pattern: "^interrupt-controller@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - ti,pruss-intc
+      - ti,icssg-intc
+    description: |
+      Use "ti,pruss-intc" for OMAP-L13x/AM18x/DA850 SoCs,
+                              AM335x family of SoCs,
+                              AM437x family of SoCs,
+                              AM57xx family of SoCs
+                              66AK2G family of SoCs
+      Use "ti,icssg-intc" for K3 AM65x, J721E and AM64x family of SoCs
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description: |
+      All the interrupts generated towards the main host processor in the SoC.
+      A shared interrupt can be skipped if the desired destination and usage is
+      by a different processor/device.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 8
+    items:
+      pattern: host_intr[0-7]
+    description: |
+      Should use one of the above names for each valid host event interrupt
+      connected to Arm interrupt controller, the name should match the
+      corresponding host event interrupt number.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      Client users shall use the PRU System event number (the interrupt source
+      that the client is interested in) [cell 1], PRU channel [cell 2] and PRU
+      host_event (target) [cell 3] as the value of the interrupts property in
+      their node.  The system events can be mapped to some output host
+      interrupts through 2 levels of many-to-one mapping i.e. events to channel
+      mapping and channels to host interrupts so through this property entire
+      mapping is provided.
+
+  ti,irqs-reserved:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Bitmask of host interrupts between 0 and 7 (corresponding to PRUSS INTC
+      output interrupts 2 through 9) that are not connected to the Arm interrupt
+      controller or are shared and used by other devices or processors in the
+      SoC. Define this property when any of 8 interrupts should not be handled
+      by Arm interrupt controller.
+        Eg: - AM437x and 66AK2G SoCs do not have "host_intr5" interrupt
+              connected to MPU
+            - AM65x and J721E SoCs have "host_intr5", "host_intr6" and
+              "host_intr7" interrupts connected to MPU, and other ICSSG
+              instances.
+            - AM64x SoCs have all the 8 host interrupts connected to various
+              other SoC entities
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    /* AM33xx PRU-ICSS */
+    pruss: pruss@0 {
+        compatible = "ti,am3356-pruss";
+        reg = <0x0 0x80000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pruss_intc: interrupt-controller@20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupts = <20 21 22 23 24 25 26 27>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4", "host_intr5",
+                              "host_intr6", "host_intr7";
+            interrupt-controller;
+            #interrupt-cells = <3>;
+        };
+    };
+
+  - |
+
+    /* AM4376 PRU-ICSS */
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pruss@0 {
+        compatible = "ti,am4376-pruss1";
+        reg = <0x0 0x40000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        interrupt-controller@20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupt-controller;
+            #interrupt-cells = <3>;
+            interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4",
+                              "host_intr6", "host_intr7";
+            ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
deleted file mode 100644
index 7841cb099e13..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Texas Instruments K3 Interrupt Aggregator
-=========================================
-
-The Interrupt Aggregator (INTA) provides a centralized machine
-which handles the termination of system events to that they can
-be coherently processed by the host(s) in the system. A maximum
-of 64 events can be mapped to a single interrupt.
-
-
-                              Interrupt Aggregator
-                     +-----------------------------------------+
-                     |      Intmap            VINT             |
-                     | +--------------+  +------------+        |
-            m ------>| | vint  | bit  |  | 0 |.....|63| vint0  |
-               .     | +--------------+  +------------+        |       +------+
-               .     |         .               .               |       | HOST |
-Globalevents  ------>|         .               .               |------>| IRQ  |
-               .     |         .               .               |       | CTRL |
-               .     |         .               .               |       +------+
-            n ------>| +--------------+  +------------+        |
-                     | | vint  | bit  |  | 0 |.....|63| vintx  |
-                     | +--------------+  +------------+        |
-                     |                                         |
-                     +-----------------------------------------+
-
-Configuration of these Intmap registers that maps global events to vint is done
-by a system controller (like the Device Memory and Security Controller on K3
-AM654 SoC). Driver should request the system controller to get the range
-of global events and vints assigned to the requesting host. Management
-of these requested resources should be handled by driver and requests
-system controller to map specific global event to vint, bit pair.
-
-Communication between the host processor running an OS and the system
-controller happens through a protocol called TI System Control Interface
-(TISCI protocol). For more details refer:
-Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-
-TISCI Interrupt Aggregator Node:
--------------------------------
-- compatible:		Must be "ti,sci-inta".
-- reg:			Should contain registers location and length.
-- interrupt-controller:	Identifies the node as an interrupt controller
-- msi-controller:	Identifies the node as an MSI controller.
-- interrupt-parent:	phandle of irq parent.
-- ti,sci:		Phandle to TI-SCI compatible System controller node.
-- ti,sci-dev-id:	TISCI device ID of the Interrupt Aggregator.
-- ti,sci-rm-range-vint:	Array of TISCI subtype ids representing vints(inta
-			outputs) range within this INTA, assigned to the
-			requesting host context.
-- ti,sci-rm-range-global-event:	Array of TISCI subtype ids representing the
-			global events range reaching this IA and are assigned
-			to the requesting host context.
-
-Example:
---------
-main_udmass_inta: interrupt-controller@33d00000 {
-	compatible = "ti,sci-inta";
-	reg = <0x0 0x33d00000 0x0 0x100000>;
-	interrupt-controller;
-	msi-controller;
-	interrupt-parent = <&main_navss_intr>;
-	ti,sci = <&dmsc>;
-	ti,sci-dev-id = <179>;
-	ti,sci-rm-range-vint = <0x0>;
-	ti,sci-rm-range-global-event = <0x1>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
new file mode 100644
index 000000000000..1151518859bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-inta.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Interrupt Aggregator
+
+maintainers:
+  - Lokesh Vutla <lokeshvutla@ti.com>
+
+allOf:
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+description: |
+  The Interrupt Aggregator (INTA) provides a centralized machine
+  which handles the termination of system events to that they can
+  be coherently processed by the host(s) in the system. A maximum
+  of 64 events can be mapped to a single interrupt.
+
+                                Interrupt Aggregator
+                       +-----------------------------------------+
+                       |      Intmap            VINT             |
+                       | +--------------+  +------------+        |
+              m ------>| | vint  | bit  |  | 0 |.....|63| vint0  |
+                 .     | +--------------+  +------------+        |      +------+
+                 .     |         .               .               |      | HOST |
+  Globalevents  ------>|         .               .               |----->| IRQ  |
+                 .     |         .               .               |      | CTRL |
+                 .     |         .               .               |      +------+
+              n ------>| +--------------+  +------------+        |
+                       | | vint  | bit  |  | 0 |.....|63| vintx  |
+                       | +--------------+  +------------+        |
+                       |                                         |
+                       |      Unmap                              |
+                       | +--------------+                        |
+  Unmapped events ---->| |   umapidx    |-------------------------> Globalevents
+                       | +--------------+                        |
+                       |                                         |
+                       +-----------------------------------------+
+
+  Configuration of these Intmap registers that maps global events to vint is
+  done by a system controller (like the Device Memory and Security Controller
+  on AM654 SoC). Driver should request the system controller to get the range
+  of global events and vints assigned to the requesting host. Management
+  of these requested resources should be handled by driver and requests
+  system controller to map specific global event to vint, bit pair.
+
+  Communication between the host processor running an OS and the system
+  controller happens through a protocol called TI System Control Interface
+  (TISCI protocol).
+
+properties:
+  compatible:
+    const: ti,sci-inta
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 0
+
+  msi-controller: true
+
+  ti,interrupt-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Interrupt ranges that converts the INTA output hw irq numbers
+      to parents's input interrupt numbers.
+    items:
+      items:
+        - description: |
+            "output_irq" specifies the base for inta output irq
+        - description: |
+            "parent's input irq" specifies the base for parent irq
+        - description: |
+            "limit" specifies the limit for translation
+
+  ti,unmapped-event-sources:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      Array of phandles to DMA controllers where the unmapped events originate.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - msi-controller
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,interrupt-ranges
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        main_udmass_inta: msi-controller@33d00000 {
+            compatible = "ti,sci-inta";
+            reg = <0x0 0x33d00000 0x0 0x100000>;
+            interrupt-controller;
+            msi-controller;
+            interrupt-parent = <&main_navss_intr>;
+            ti,sci = <&dmsc>;
+            ti,sci-dev-id = <179>;
+            ti,interrupt-ranges = <0 0 256>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
deleted file mode 100644
index 1a8718f8855d..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Texas Instruments K3 Interrupt Router
-=====================================
-
-The Interrupt Router (INTR) module provides a mechanism to mux M
-interrupt inputs to N interrupt outputs, where all M inputs are selectable
-to be driven per N output. An Interrupt Router can either handle edge triggered
-or level triggered interrupts and that is fixed in hardware.
-
-                                 Interrupt Router
-                             +----------------------+
-                             |  Inputs     Outputs  |
-        +-------+            | +------+    +-----+  |
-        | GPIO  |----------->| | irq0 |    |  0  |  |       Host IRQ
-        +-------+            | +------+    +-----+  |      controller
-                             |    .           .     |      +-------+
-        +-------+            |    .           .     |----->|  IRQ  |
-        | INTA  |----------->|    .           .     |      +-------+
-        +-------+            |    .        +-----+  |
-                             | +------+    |  N  |  |
-                             | | irqM |    +-----+  |
-                             | +------+             |
-                             |                      |
-                             +----------------------+
-
-There is one register per output (MUXCNTL_N) that controls the selection.
-Configuration of these MUXCNTL_N registers is done by a system controller
-(like the Device Memory and Security Controller on K3 AM654 SoC). System
-controller will keep track of the used and unused registers within the Router.
-Driver should request the system controller to get the range of GIC IRQs
-assigned to the requesting hosts. It is the drivers responsibility to keep
-track of Host IRQs.
-
-Communication between the host processor running an OS and the system
-controller happens through a protocol called TI System Control Interface
-(TISCI protocol). For more details refer:
-Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-
-TISCI Interrupt Router Node:
-----------------------------
-Required Properties:
-- compatible:		Must be "ti,sci-intr".
-- ti,intr-trigger-type:	Should be one of the following:
-			1: If intr supports edge triggered interrupts.
-			4: If intr supports level triggered interrupts.
-- interrupt-controller:	Identifies the node as an interrupt controller
-- #interrupt-cells:	Specifies the number of cells needed to encode an
-			interrupt source. The value should be 2.
-			First cell should contain the TISCI device ID of source
-			Second cell should contain the interrupt source offset
-			within the device.
-- ti,sci:		Phandle to TI-SCI compatible System controller node.
-- ti,sci-dst-id:	TISCI device ID of the destination IRQ controller.
-- ti,sci-rm-range-girq:	Array of TISCI subtype ids representing the host irqs
-			assigned to this interrupt router. Each subtype id
-			corresponds to a range of host irqs.
-
-For more details on TISCI IRQ resource management refer:
-http://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html
-
-Example:
---------
-The following example demonstrates both interrupt router node and the consumer
-node(main gpio) on the AM654 SoC:
-
-main_intr: interrupt-controller0 {
-	compatible = "ti,sci-intr";
-	ti,intr-trigger-type = <1>;
-	interrupt-controller;
-	interrupt-parent = <&gic500>;
-	#interrupt-cells = <2>;
-	ti,sci = <&dmsc>;
-	ti,sci-dst-id = <56>;
-	ti,sci-rm-range-girq = <0x1>;
-};
-
-main_gpio0: gpio@600000 {
-	...
-	interrupt-parent = <&main_intr>;
-	interrupts = <57 256>, <57 257>, <57 258>,
-		     <57 259>, <57 260>, <57 261>;
-	...
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
new file mode 100644
index 000000000000..c99cc7323c71
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Interrupt Router
+
+maintainers:
+  - Lokesh Vutla <lokeshvutla@ti.com>
+
+allOf:
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+description: |
+  The Interrupt Router (INTR) module provides a mechanism to mux M
+  interrupt inputs to N interrupt outputs, where all M inputs are selectable
+  to be driven per N output. An Interrupt Router can either handle edge
+  triggered or level triggered interrupts and that is fixed in hardware.
+
+                                   Interrupt Router
+                               +----------------------+
+                               |  Inputs     Outputs  |
+          +-------+            | +------+    +-----+  |
+          | GPIO  |----------->| | irq0 |    |  0  |  |       Host IRQ
+          +-------+            | +------+    +-----+  |      controller
+                               |    .           .     |      +-------+
+          +-------+            |    .           .     |----->|  IRQ  |
+          | INTA  |----------->|    .           .     |      +-------+
+          +-------+            |    .        +-----+  |
+                               | +------+    |  N  |  |
+                               | | irqM |    +-----+  |
+                               | +------+             |
+                               |                      |
+                               +----------------------+
+
+  There is one register per output (MUXCNTL_N) that controls the selection.
+  Configuration of these MUXCNTL_N registers is done by a system controller
+  (like the Device Memory and Security Controller on K3 AM654 SoC). System
+  controller will keep track of the used and unused registers within the Router.
+  Driver should request the system controller to get the range of GIC IRQs
+  assigned to the requesting hosts. It is the drivers responsibility to keep
+  track of Host IRQs.
+
+  Communication between the host processor running an OS and the system
+  controller happens through a protocol called TI System Control Interface
+  (TISCI protocol).
+
+properties:
+  compatible:
+    const: ti,sci-intr
+
+  ti,intr-trigger-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 4]
+    description: |
+      Should be one of the following.
+        1 = If intr supports edge triggered interrupts.
+        4 = If intr supports level triggered interrupts.
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+    description: |
+      The 1st cell should contain interrupt router input hw number.
+
+  ti,interrupt-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Interrupt ranges that converts the INTR output hw irq numbers
+      to parents's input interrupt numbers.
+    items:
+      items:
+        - description: |
+            "output_irq" specifies the base for intr output irq
+        - description: |
+            "parent's input irq" specifies the base for parent irq
+        - description: |
+            "limit" specifies the limit for translation
+
+required:
+  - compatible
+  - ti,intr-trigger-type
+  - interrupt-controller
+  - '#interrupt-cells'
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,interrupt-ranges
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    main_gpio_intr: interrupt-controller0 {
+        compatible = "ti,sci-intr";
+        ti,intr-trigger-type = <1>;
+        interrupt-controller;
+        interrupt-parent = <&gic500>;
+        #interrupt-cells = <1>;
+        ti,sci = <&dmsc>;
+        ti,sci-dev-id = <131>;
+        ti,interrupt-ranges = <0 360 32>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
new file mode 100644
index 000000000000..e20016f12017
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/allwinner,sun50i-h6-iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 IOMMU
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#iommu-cells":
+    const: 1
+    description:
+      The content of the cell is the master ID.
+
+  compatible:
+    const: allwinner,sun50i-h6-iommu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#iommu-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interrupt-controller/arm-gic.h>
+      #include <dt-bindings/interrupt-controller/irq.h>
+
+      #include <dt-bindings/clock/sun50i-h6-ccu.h>
+      #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+      iommu: iommu@30f0000 {
+          compatible = "allwinner,sun50i-h6-iommu";
+          reg = <0x030f0000 0x10000>;
+          interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+          clocks = <&ccu CLK_BUS_IOMMU>;
+          resets = <&ccu RST_BUS_IOMMU>;
+          #iommu-cells = <1>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/iommu/apple,dart.yaml b/Documentation/devicetree/bindings/iommu/apple,dart.yaml
new file mode 100644
index 000000000000..82ad669feef7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/apple,dart.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/apple,dart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple DART IOMMU
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description: |+
+  Apple SoCs may contain an implementation of their Device Address
+  Resolution Table which provides a mandatory layer of address
+  translations for various masters.
+
+  Each DART instance is capable of handling up to 16 different streams
+  with individual pagetables and page-level read/write protection flags.
+
+  This DART IOMMU also raises interrupts in response to various
+  fault conditions.
+
+properties:
+  compatible:
+    const: apple,t8103-dart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Reference to the gate clock phandle if required for this IOMMU.
+      Optional since not all IOMMUs are attached to a clock gate.
+
+  '#iommu-cells':
+    const: 1
+    description:
+      Has to be one. The single cell describes the stream id emitted by
+      a master to the IOMMU.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#iommu-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |+
+    dart1: iommu@82f80000 {
+      compatible = "apple,t8103-dart";
+      reg = <0x82f80000 0x4000>;
+      interrupts = <1 781 4>;
+      #iommu-cells = <1>;
+    };
+
+    master1 {
+      iommus = <&dart1 0>;
+    };
+
+  - |+
+    dart2a: iommu@82f00000 {
+      compatible = "apple,t8103-dart";
+      reg = <0x82f00000 0x4000>;
+      interrupts = <1 781 4>;
+      #iommu-cells = <1>;
+    };
+    dart2b: iommu@82f80000 {
+      compatible = "apple,t8103-dart";
+      reg = <0x82f80000 0x4000>;
+      interrupts = <1 781 4>;
+      #iommu-cells = <1>;
+    };
+
+    master2 {
+      iommus = <&dart2a 0>, <&dart2b 1>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/apple,sart.yaml b/Documentation/devicetree/bindings/iommu/apple,sart.yaml
new file mode 100644
index 000000000000..1524fa3094ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/apple,sart.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/apple,sart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SART DMA address filter
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description:
+  Apple SART is a simple address filter for DMA transactions. Regions of
+  physical memory must be added to the SART's allow list before any
+  DMA can target these. Unlike a proper IOMMU no remapping can be done and
+  special support in the consumer driver is required since not all DMA
+  transactions of a single device are subject to SART filtering.
+
+  SART1 has first been used since at least the A11 (iPhone 8 and iPhone X)
+  and allows 36 bit of physical address space and filter entries with sizes
+  up to 24 bit.
+
+  SART2, first seen in A14 and M1, allows 36 bit of physical address space
+  and filter entry size up to 36 bit.
+
+  SART3, first seen in M1 Pro/Max, extends both the address space and filter
+  entry size to 42 bit.
+
+properties:
+  compatible:
+    enum:
+      - apple,t6000-sart
+      - apple,t8103-sart
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu@7bc50000 {
+      compatible = "apple,t8103-sart";
+      reg = <0x7bc50000 0x4000>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
index 5951c6f98c74..75fcf4cb52d9 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
@@ -37,13 +37,13 @@ properties:
           hardware supports just a single, combined interrupt line.
           If provided, then the combined interrupt will be used in preference to
           any others.
-      - minItems: 2
-        maxItems: 4
+      - minItems: 1
         items:
-          - const: eventq     # Event Queue not empty
-          - const: gerror     # Global Error activated
-          - const: priq       # PRI Queue not empty
-          - const: cmdq-sync  # CMD_SYNC complete
+          enum:
+            - eventq      # Event Queue not empty
+            - gerror      # Global Error activated
+            - cmdq-sync   # CMD_SYNC complete
+            - priq        # PRI Queue not empty
 
   '#iommu-cells':
     const: 1
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index 6515dbe47508..9066e6df1ba1 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -28,20 +28,54 @@ properties:
           - enum:
               - qcom,msm8996-smmu-v2
               - qcom,msm8998-smmu-v2
-              - qcom,sdm845-smmu-v2
           - const: qcom,smmu-v2
 
       - description: Qcom SoCs implementing "arm,mmu-500"
         items:
           - enum:
+              - qcom,qcm2290-smmu-500
               - qcom,sc7180-smmu-500
+              - qcom,sc7280-smmu-500
+              - qcom,sc8180x-smmu-500
+              - qcom,sc8280xp-smmu-500
               - qcom,sdm845-smmu-500
+              - qcom,sdx55-smmu-500
+              - qcom,sdx65-smmu-500
+              - qcom,sm6350-smmu-500
+              - qcom,sm6375-smmu-500
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+              - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
           - const: arm,mmu-500
+      - description: Qcom Adreno GPUs implementing "arm,smmu-v2"
+        items:
+          - enum:
+              - qcom,sc7180-smmu-v2
+              - qcom,sdm845-smmu-v2
+          - const: qcom,adreno-smmu
+          - const: qcom,smmu-v2
+      - description: Marvell SoCs implementing "arm,mmu-500"
+        items:
+          - const: marvell,ap806-smmu-500
+          - const: arm,mmu-500
+      - description: NVIDIA SoCs that require memory controller interaction
+          and may program multiple ARM MMU-500s identically with the memory
+          controller interleaving translations between multiple instances
+          for improved performance.
+        items:
+          - enum:
+              - nvidia,tegra186-smmu
+              - nvidia,tegra194-smmu
+              - nvidia,tegra234-smmu
+          - const: nvidia,smmu-500
       - items:
           - const: arm,mmu-500
           - const: arm,smmu-v2
       - items:
-          - const: arm,mmu-401
+          - enum:
+              - arm,mmu-400
+              - arm,mmu-401
           - const: arm,smmu-v1
       - enum:
           - arm,smmu-v1
@@ -52,12 +86,12 @@ properties:
           - cavium,smmu-v2
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   '#global-interrupts':
     description: The number of global interrupts exposed by the device.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 260   # 2 secure, 2 non-secure, and up to 256 perf counters
 
@@ -127,6 +161,17 @@ properties:
   power-domains:
     maxItems: 1
 
+  nvidia,memory-controller:
+    description: |
+      A phandle to the memory controller on NVIDIA Tegra186 and later SoCs.
+      The memory controller needs to be programmed with a mapping of memory
+      client IDs to ARM SMMU stream IDs.
+
+      If this property is absent, the mapping programmed by early firmware
+      will be used and it is not guaranteed that IOMMU translations will be
+      enabled for any given device.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
 required:
   - compatible
   - reg
@@ -136,6 +181,31 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-smmu
+              - nvidia,tegra194-smmu
+              - nvidia,tegra234-smmu
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+
+      # The reference to the memory controller is required to ensure that the
+      # memory client to stream ID mapping can be done synchronously with the
+      # IOMMU attachment.
+      required:
+        - nvidia,memory-controller
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
 examples:
   - |+
     /* SMMU with stream matching or stream indexing */
diff --git a/Documentation/devicetree/bindings/iommu/iommu.txt b/Documentation/devicetree/bindings/iommu/iommu.txt
index 3c36334e4f94..26ba9e530f13 100644
--- a/Documentation/devicetree/bindings/iommu/iommu.txt
+++ b/Documentation/devicetree/bindings/iommu/iommu.txt
@@ -92,6 +92,24 @@ Optional properties:
   tagging DMA transactions with an address space identifier. By default,
   this is 0, which means that the device only has one address space.
 
+- dma-can-stall: When present, the master can wait for a transaction to
+  complete for an indefinite amount of time. Upon translation fault some
+  IOMMUs, instead of aborting the translation immediately, may first
+  notify the driver and keep the transaction in flight. This allows the OS
+  to inspect the fault and, for example, make physical pages resident
+  before updating the mappings and completing the transaction. Such IOMMU
+  accepts a limited number of simultaneous stalled transactions before
+  having to either put back-pressure on the master, or abort new faulting
+  transactions.
+
+  Firmware has to opt-in stalling, because most buses and masters don't
+  support it. In particular it isn't compatible with PCI, where
+  transactions have to complete before a time limit. More generally it
+  won't work in systems and masters that haven't been designed for
+  stalling. For example the OS, in order to handle a stalled transaction,
+  may attempt to retrieve pages from secondary storage in a stalled
+  domain, leading to a deadlock.
+
 
 Notes:
 ======
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
deleted file mode 100644
index ce59a505f5a4..000000000000
--- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-* Mediatek IOMMU Architecture Implementation
-
-  Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U), and
-this M4U have two generations of HW architecture. Generation one uses flat
-pagetable, and only supports 4K size page mapping. Generation two uses the
-ARM Short-Descriptor translation table format for address translation.
-
-  About the M4U Hardware Block Diagram, please check below:
-
-              EMI (External Memory Interface)
-               |
-              m4u (Multimedia Memory Management Unit)
-               |
-          +--------+
-          |        |
-      gals0-rx   gals1-rx    (Global Async Local Sync rx)
-          |        |
-          |        |
-      gals0-tx   gals1-tx    (Global Async Local Sync tx)
-          |        |          Some SoCs may have GALS.
-          +--------+
-               |
-           SMI Common(Smart Multimedia Interface Common)
-               |
-       +----------------+-------
-       |                |
-       |             gals-rx        There may be GALS in some larbs.
-       |                |
-       |                |
-       |             gals-tx
-       |                |
-   SMI larb0        SMI larb1   ... SoCs have several SMI local arbiter(larb).
-   (display)         (vdec)
-       |                |
-       |                |
- +-----+-----+     +----+----+
- |     |     |     |    |    |
- |     |     |...  |    |    |  ... There are different ports in each larb.
- |     |     |     |    |    |
-OVL0 RDMA0 WDMA0  MC   PP   VLD
-
-  As above, The Multimedia HW will go through SMI and M4U while it
-access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain
-smi local arbiter and smi common. It will control whether the Multimedia
-HW should go though the m4u for translation or bypass it and talk
-directly with EMI. And also SMI help control the power domain and clocks for
-each local arbiter.
-  Normally we specify a local arbiter(larb) for each multimedia HW
-like display, video decode, and camera. And there are different ports
-in each larb. Take a example, There are many ports like MC, PP, VLD in the
-video decode local arbiter, all these ports are according to the video HW.
-  In some SoCs, there may be a GALS(Global Async Local Sync) module between
-smi-common and m4u, and additional GALS module between smi-larb and
-smi-common. GALS can been seen as a "asynchronous fifo" which could help
-synchronize for the modules in different clock frequency.
-
-Required properties:
-- compatible : must be one of the following string:
-	"mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW.
-	"mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW.
-	"mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses
-						     generation one m4u HW.
-	"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
-	"mediatek,mt8183-m4u" for mt8183 which uses generation two m4u HW.
-- reg : m4u register base and size.
-- interrupts : the interrupt of m4u.
-- clocks : must contain one entry for each clock-names.
-- clock-names : Only 1 optional clock:
-  - "bclk": the block clock of m4u.
-  Here is the list which require this "bclk":
-  - mt2701, mt2712, mt7623 and mt8173.
-  Note that m4u use the EMI clock which always has been enabled before kernel
-  if there is no this "bclk".
-- mediatek,larbs : List of phandle to the local arbiters in the current Socs.
-	Refer to bindings/memory-controllers/mediatek,smi-larb.txt. It must sort
-	according to the local arbiter index, like larb0, larb1, larb2...
-- iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
-	Specifies the mtk_m4u_id as defined in
-	dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623
-	dt-binding/memory/mt2712-larb-port.h for mt2712,
-	dt-binding/memory/mt8173-larb-port.h for mt8173, and
-	dt-binding/memory/mt8183-larb-port.h for mt8183.
-
-Example:
-	iommu: iommu@10205000 {
-		compatible = "mediatek,mt8173-m4u";
-		reg = <0 0x10205000 0 0x1000>;
-		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_M4U>;
-		clock-names = "bclk";
-		mediatek,larbs = <&larb0 &larb1 &larb2 &larb3 &larb4 &larb5>;
-		#iommu-cells = <1>;
-	};
-
-Example for a client device:
-	display {
-		compatible = "mediatek,mt8173-disp";
-		iommus = <&iommu M4U_PORT_DISP_OVL0>,
-			 <&iommu M4U_PORT_DISP_RDMA0>;
-		...
-	};
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
new file mode 100644
index 000000000000..839e3be0bf3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/mediatek,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek IOMMU Architecture Implementation
+
+maintainers:
+  - Yong Wu <yong.wu@mediatek.com>
+
+description: |+
+  Some MediaTek SOCs contain a Multimedia Memory Management Unit (M4U), and
+  this M4U have two generations of HW architecture. Generation one uses flat
+  pagetable, and only supports 4K size page mapping. Generation two uses the
+  ARM Short-Descriptor translation table format for address translation.
+
+  About the M4U Hardware Block Diagram, please check below:
+
+                EMI (External Memory Interface)
+                 |
+                m4u (Multimedia Memory Management Unit)
+                 |
+            +--------+
+            |        |
+        gals0-rx   gals1-rx    (Global Async Local Sync rx)
+            |        |
+            |        |
+        gals0-tx   gals1-tx    (Global Async Local Sync tx)
+            |        |          Some SoCs may have GALS.
+            +--------+
+                 |
+             SMI Common(Smart Multimedia Interface Common)
+                 |
+         +----------------+-------
+         |                |
+         |             gals-rx        There may be GALS in some larbs.
+         |                |
+         |                |
+         |             gals-tx
+         |                |
+     SMI larb0        SMI larb1   ... SoCs have several SMI local arbiter(larb).
+     (display)         (vdec)
+         |                |
+         |                |
+   +-----+-----+     +----+----+
+   |     |     |     |    |    |
+   |     |     |...  |    |    |  ... There are different ports in each larb.
+   |     |     |     |    |    |
+  OVL0 RDMA0 WDMA0  MC   PP   VLD
+
+  As above, The Multimedia HW will go through SMI and M4U while it
+  access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain
+  smi local arbiter and smi common. It will control whether the Multimedia
+  HW should go though the m4u for translation or bypass it and talk
+  directly with EMI. And also SMI help control the power domain and clocks for
+  each local arbiter.
+
+  Normally we specify a local arbiter(larb) for each multimedia HW
+  like display, video decode, and camera. And there are different ports
+  in each larb. Take a example, There are many ports like MC, PP, VLD in the
+  video decode local arbiter, all these ports are according to the video HW.
+
+  In some SoCs, there may be a GALS(Global Async Local Sync) module between
+  smi-common and m4u, and additional GALS module between smi-larb and
+  smi-common. GALS can been seen as a "asynchronous fifo" which could help
+  synchronize for the modules in different clock frequency.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-m4u  # generation one
+          - mediatek,mt2712-m4u  # generation two
+          - mediatek,mt6779-m4u  # generation two
+          - mediatek,mt6795-m4u  # generation two
+          - mediatek,mt8167-m4u  # generation two
+          - mediatek,mt8173-m4u  # generation two
+          - mediatek,mt8183-m4u  # generation two
+          - mediatek,mt8186-iommu-mm         # generation two
+          - mediatek,mt8192-m4u  # generation two
+          - mediatek,mt8195-iommu-vdo        # generation two
+          - mediatek,mt8195-iommu-vpp        # generation two
+          - mediatek,mt8195-iommu-infra      # generation two
+
+      - description: mt7623 generation one
+        items:
+          - const: mediatek,mt7623-m4u
+          - const: mediatek,mt2701-m4u
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: bclk is the block clock.
+
+  clock-names:
+    items:
+      - const: bclk
+
+  mediatek,infracfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the mediatek infracfg syscon
+
+  mediatek,larbs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 32
+    items:
+      maxItems: 1
+    description: |
+      List of phandle to the local arbiters in the current Socs.
+      Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. It must sort
+      according to the local arbiter index, like larb0, larb1, larb2...
+
+  '#iommu-cells':
+    const: 1
+    description: |
+      This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as
+      defined in
+      dt-binding/memory/mt2701-larb-port.h for mt2701 and mt7623,
+      dt-binding/memory/mt2712-larb-port.h for mt2712,
+      dt-binding/memory/mt6779-larb-port.h for mt6779,
+      dt-binding/memory/mt6795-larb-port.h for mt6795,
+      dt-binding/memory/mt8167-larb-port.h for mt8167,
+      dt-binding/memory/mt8173-larb-port.h for mt8173,
+      dt-binding/memory/mt8183-larb-port.h for mt8183,
+      dt-binding/memory/mt8186-memory-port.h for mt8186,
+      dt-binding/memory/mt8192-larb-port.h for mt8192.
+      dt-binding/memory/mt8195-memory-port.h for mt8195.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#iommu-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-m4u
+              - mediatek,mt2712-m4u
+              - mediatek,mt6795-m4u
+              - mediatek,mt8173-m4u
+              - mediatek,mt8186-iommu-mm
+              - mediatek,mt8192-m4u
+              - mediatek,mt8195-iommu-vdo
+              - mediatek,mt8195-iommu-vpp
+
+    then:
+      required:
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8186-iommu-mm
+            - mediatek,mt8192-m4u
+            - mediatek,mt8195-iommu-vdo
+            - mediatek,mt8195-iommu-vpp
+
+    then:
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2712-m4u
+              - mediatek,mt6795-m4u
+              - mediatek,mt8173-m4u
+
+    then:
+      required:
+        - mediatek,infracfg
+
+  - if: # The IOMMUs don't have larbs.
+      not:
+        properties:
+          compatible:
+            contains:
+              const: mediatek,mt8195-iommu-infra
+
+    then:
+      required:
+        - mediatek,larbs
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    iommu: iommu@10205000 {
+            compatible = "mediatek,mt8173-m4u";
+            reg = <0x10205000 0x1000>;
+            interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&infracfg CLK_INFRA_M4U>;
+            clock-names = "bclk";
+            mediatek,infracfg = <&infracfg>;
+            mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+                             <&larb3>, <&larb4>, <&larb5>;
+            #iommu-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt
deleted file mode 100644
index 020d6f226efb..000000000000
--- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-* Renesas VMSA-Compatible IOMMU
-
-The IPMMU is an IOMMU implementation compatible with the ARM VMSA page tables.
-It provides address translation for bus masters outside of the CPU, each
-connected to the IPMMU through a port called micro-TLB.
-
-
-Required Properties:
-
-  - compatible: Must contain SoC-specific and generic entry below in case
-    the device is compatible with the R-Car Gen2 VMSA-compatible IPMMU.
-
-    - "renesas,ipmmu-r8a73a4" for the R8A73A4 (R-Mobile APE6) IPMMU.
-    - "renesas,ipmmu-r8a7743" for the R8A7743 (RZ/G1M) IPMMU.
-    - "renesas,ipmmu-r8a7744" for the R8A7744 (RZ/G1N) IPMMU.
-    - "renesas,ipmmu-r8a7745" for the R8A7745 (RZ/G1E) IPMMU.
-    - "renesas,ipmmu-r8a774a1" for the R8A774A1 (RZ/G2M) IPMMU.
-    - "renesas,ipmmu-r8a774b1" for the R8A774B1 (RZ/G2N) IPMMU.
-    - "renesas,ipmmu-r8a774c0" for the R8A774C0 (RZ/G2E) IPMMU.
-    - "renesas,ipmmu-r8a7790" for the R8A7790 (R-Car H2) IPMMU.
-    - "renesas,ipmmu-r8a7791" for the R8A7791 (R-Car M2-W) IPMMU.
-    - "renesas,ipmmu-r8a7793" for the R8A7793 (R-Car M2-N) IPMMU.
-    - "renesas,ipmmu-r8a7794" for the R8A7794 (R-Car E2) IPMMU.
-    - "renesas,ipmmu-r8a7795" for the R8A7795 (R-Car H3) IPMMU.
-    - "renesas,ipmmu-r8a7796" for the R8A7796 (R-Car M3-W) IPMMU.
-    - "renesas,ipmmu-r8a77965" for the R8A77965 (R-Car M3-N) IPMMU.
-    - "renesas,ipmmu-r8a77970" for the R8A77970 (R-Car V3M) IPMMU.
-    - "renesas,ipmmu-r8a77980" for the R8A77980 (R-Car V3H) IPMMU.
-    - "renesas,ipmmu-r8a77990" for the R8A77990 (R-Car E3) IPMMU.
-    - "renesas,ipmmu-r8a77995" for the R8A77995 (R-Car D3) IPMMU.
-    - "renesas,ipmmu-vmsa" for generic R-Car Gen2 or RZ/G1 VMSA-compatible
-			   IPMMU.
-
-  - reg: Base address and size of the IPMMU registers.
-  - interrupts: Specifiers for the MMU fault interrupts. For instances that
-    support secure mode two interrupts must be specified, for non-secure and
-    secure mode, in that order. For instances that don't support secure mode a
-    single interrupt must be specified. Not required for cache IPMMUs.
-
-  - #iommu-cells: Must be 1.
-
-Optional properties:
-
-  - renesas,ipmmu-main: reference to the main IPMMU instance in two cells.
-    The first cell is a phandle to the main IPMMU and the second cell is
-    the interrupt bit number associated with the particular cache IPMMU device.
-    The interrupt bit number needs to match the main IPMMU IMSSTR register.
-    Only used by cache IPMMU instances.
-
-
-Each bus master connected to an IPMMU must reference the IPMMU in its device
-node with the following property:
-
-  - iommus: A reference to the IPMMU in two cells. The first cell is a phandle
-    to the IPMMU and the second cell the number of the micro-TLB that the
-    device is connected to.
-
-
-Example: R8A7791 IPMMU-MX and VSP1-D0 bus master
-
-	ipmmu_mx: mmu@fe951000 {
-		compatible = "renasas,ipmmu-r8a7791", "renasas,ipmmu-vmsa";
-		reg = <0 0xfe951000 0 0x1000>;
-		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
-		#iommu-cells = <1>;
-	};
-
-	vsp@fe928000 {
-		...
-		iommus = <&ipmmu_mx 13>;
-		...
-	};
diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
new file mode 100644
index 000000000000..8854569ca3a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/renesas,ipmmu-vmsa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas VMSA-Compatible IOMMU
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description:
+  The IPMMU is an IOMMU implementation compatible with the ARM VMSA page tables.
+  It provides address translation for bus masters outside of the CPU, each
+  connected to the IPMMU through a port called micro-TLB.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,ipmmu-r8a73a4  # R-Mobile APE6
+              - renesas,ipmmu-r8a7742  # RZ/G1H
+              - renesas,ipmmu-r8a7743  # RZ/G1M
+              - renesas,ipmmu-r8a7744  # RZ/G1N
+              - renesas,ipmmu-r8a7745  # RZ/G1E
+              - renesas,ipmmu-r8a7790  # R-Car H2
+              - renesas,ipmmu-r8a7791  # R-Car M2-W
+              - renesas,ipmmu-r8a7793  # R-Car M2-N
+              - renesas,ipmmu-r8a7794  # R-Car E2
+          - const: renesas,ipmmu-vmsa  # R-Mobile APE6 or R-Car Gen2 or RZ/G1
+      - items:
+          - enum:
+              - renesas,ipmmu-r8a774a1 # RZ/G2M
+              - renesas,ipmmu-r8a774b1 # RZ/G2N
+              - renesas,ipmmu-r8a774c0 # RZ/G2E
+              - renesas,ipmmu-r8a774e1 # RZ/G2H
+              - renesas,ipmmu-r8a7795  # R-Car H3
+              - renesas,ipmmu-r8a7796  # R-Car M3-W
+              - renesas,ipmmu-r8a77961 # R-Car M3-W+
+              - renesas,ipmmu-r8a77965 # R-Car M3-N
+              - renesas,ipmmu-r8a77970 # R-Car V3M
+              - renesas,ipmmu-r8a77980 # R-Car V3H
+              - renesas,ipmmu-r8a77990 # R-Car E3
+              - renesas,ipmmu-r8a77995 # R-Car D3
+              - renesas,ipmmu-r8a779a0 # R-Car V3U
+      - items:
+          - enum:
+              - renesas,ipmmu-r8a779f0 # R-Car S4-8
+          - const: renesas,rcar-gen4-ipmmu-vmsa  # R-Car Gen4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    description:
+      Specifiers for the MMU fault interrupts. Not required for cache IPMMUs.
+    items:
+      - description: non-secure mode
+      - description: secure mode if supported
+
+  '#iommu-cells':
+    const: 1
+    description:
+      The number of the micro-TLB that the device is connected to.
+
+  power-domains:
+    maxItems: 1
+
+  renesas,ipmmu-main:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to main IPMMU
+          - description: the interrupt bit number associated with the particular
+              cache IPMMU device. The interrupt bit number needs to match the main
+              IPMMU IMSSTR register. Only used by cache IPMMU instances.
+    description:
+      Reference to the main IPMMU phandle plus 1 cell. The cell is
+      the interrupt bit number associated with the particular cache IPMMU
+      device. The interrupt bit number needs to match the main IPMMU IMSSTR
+      register. Only used by cache IPMMU instances.
+
+required:
+  - compatible
+  - reg
+  - '#iommu-cells'
+
+oneOf:
+  - required:
+      - interrupts
+  - required:
+      - renesas,ipmmu-main
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: renesas,ipmmu-vmsa
+    then:
+      required:
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    ipmmu_mx: iommu@fe951000 {
+        compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
+        reg = <0xfe951000 0x1000>;
+        interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+        #iommu-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
deleted file mode 100644
index 6ecefea1c6f9..000000000000
--- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Rockchip IOMMU
-==============
-
-A Rockchip DRM iommu translates io virtual addresses to physical addresses for
-its master device.  Each slave device is bound to a single master device, and
-shares its clocks, power domain and irq.
-
-Required properties:
-- compatible      : Should be "rockchip,iommu"
-- reg             : Address space for the configuration registers
-- interrupts      : Interrupt specifier for the IOMMU instance
-- interrupt-names : Interrupt name for the IOMMU instance
-- #iommu-cells    : Should be <0>.  This indicates the iommu is a
-                    "single-master" device, and needs no additional information
-                    to associate with its master device.  See:
-                    Documentation/devicetree/bindings/iommu/iommu.txt
-- clocks          : A list of clocks required for the IOMMU to be accessible by
-                    the host CPU.
-- clock-names     : Should contain the following:
-	"iface" - Main peripheral bus clock (PCLK/HCL) (required)
-	"aclk"  - AXI bus clock (required)
-
-Optional properties:
-- rockchip,disable-mmu-reset : Don't use the mmu reset operation.
-			       Some mmu instances may produce unexpected results
-			       when the reset operation is used.
-
-Example:
-
-	vopl_mmu: iommu@ff940300 {
-		compatible = "rockchip,iommu";
-		reg = <0xff940300 0x100>;
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vopl_mmu";
-		clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
-		clock-names = "aclk", "iface";
-		#iommu-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
new file mode 100644
index 000000000000..ba9124f721f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/rockchip,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip IOMMU
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |+
+  A Rockchip DRM iommu translates io virtual addresses to physical addresses for
+  its master device. Each slave device is bound to a single master device and
+  shares its clocks, power domain and irq.
+
+  For information on assigning IOMMU controller to its peripheral devices,
+  see generic IOMMU bindings.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,iommu
+      - rockchip,rk3568-iommu
+
+  reg:
+    items:
+      - description: configuration registers for MMU instance 0
+      - description: configuration registers for MMU instance 1
+    minItems: 1
+
+  interrupts:
+    items:
+      - description: interruption for MMU instance 0
+      - description: interruption for MMU instance 1
+    minItems: 1
+
+  clocks:
+    items:
+      - description: Core clock
+      - description: Interface clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: iface
+
+  "#iommu-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,disable-mmu-reset:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Do not use the mmu reset operation.
+      Some mmu instances may produce unexpected results
+      when the reset operation is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vopl_mmu: iommu@ff940300 {
+      compatible = "rockchip,iommu";
+      reg = <0xff940300 0x100>;
+      interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+      clock-names = "aclk", "iface";
+      #iommu-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
index 7cdd3aaa2ba4..672a0beea600 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
@@ -54,13 +54,13 @@ properties:
   clock-names:
     oneOf:
       - items:
-        - const: sysmmu
+          - const: sysmmu
       - items:
-        - const: sysmmu
-        - const: master
+          - const: sysmmu
+          - const: master
       - items:
-        - const: aclk
-        - const: pclk
+          - const: aclk
+          - const: pclk
 
   "#iommu-cells":
     const: 0
@@ -80,20 +80,12 @@ required:
   - clock-names
   - "#iommu-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/exynos5250.h>
 
-    gsc_0: scaler@13e00000 {
-      compatible = "samsung,exynos5-gsc";
-      reg = <0x13e00000 0x1000>;
-      interrupts = <0 85 0>;
-      power-domains = <&pd_gsc>;
-      clocks = <&clock CLK_GSCL0>;
-      clock-names = "gscl";
-      iommus = <&sysmmu_gsc0>;
-    };
-
     sysmmu_gsc0: iommu@13e80000 {
       compatible = "samsung,exynos-sysmmu";
       reg = <0x13E80000 0x1000>;
@@ -105,4 +97,3 @@ examples:
       power-domains = <&pd_gsc>;
       #iommu-cells = <0>;
     };
-
diff --git a/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml b/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml
new file mode 100644
index 000000000000..7003e12f55f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/sprd,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc IOMMU and Multi-media MMU
+
+maintainers:
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,iommu-v1
+
+  "#iommu-cells":
+    const: 0
+    description:
+      Unisoc IOMMUs are all single-master IOMMU devices, therefore no
+      additional information needs to associate with its master device.
+      Please refer to the generic bindings document for more details,
+      Documentation/devicetree/bindings/iommu/iommu.txt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      Reference to a gate clock phandle, since access to some of IOMMUs are
+      controlled by gate clock, but this is not required.
+
+required:
+  - compatible
+  - reg
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu_disp: iommu@63000800 {
+      compatible = "sprd,iommu-v1";
+      reg = <0x63000800 0x80>;
+      #iommu-cells = <0>;
+    };
+
+  - |
+    iommu_jpg: iommu@62300300 {
+      compatible = "sprd,iommu-v1";
+      reg = <0x62300300 0x80>;
+      #iommu-cells = <0>;
+      clocks = <&mm_gate 1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
new file mode 100644
index 000000000000..be1539d234f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xen specific IOMMU for virtualized devices (e.g. virtio)
+
+maintainers:
+  - Stefano Stabellini <sstabellini@kernel.org>
+
+description:
+  The Xen IOMMU represents the Xen grant table interface. Grant mappings
+  are to be used with devices connected to the Xen IOMMU using the "iommus"
+  property, which also specifies the ID of the backend domain.
+  The binding is required to restrict memory access using Xen grant mappings.
+
+properties:
+  compatible:
+    const: xen,grant-dma
+
+  '#iommu-cells':
+    const: 1
+    description:
+      The single cell is the domid (domain ID) of the domain where the backend
+      is running.
+
+required:
+  - compatible
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu {
+        compatible = "xen,grant-dma";
+        #iommu-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
index 028268fd99ee..25f86da804b7 100644
--- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
@@ -9,7 +9,9 @@ Required properties:
 - compatible : should be one of
 	"aspeed,ast2400-ibt-bmc"
 	"aspeed,ast2500-ibt-bmc"
+	"aspeed,ast2600-ibt-bmc"
 - reg: physical address and size of the registers
+- clocks: clock for the device
 
 Optional properties:
 
@@ -22,4 +24,5 @@ Example:
 		compatible = "aspeed,ast2400-ibt-bmc";
 		reg = <0x1e789140 0x18>;
 		interrupts = <8>;
+		clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 	};
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
new file mode 100644
index 000000000000..4ff6fabfcb30
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED BMC KCS Devices
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |
+  The Aspeed BMC SoCs typically use the Keyboard-Controller-Style (KCS)
+  interfaces on the LPC bus for in-band IPMI communication with their host.
+
+properties:
+  compatible:
+    oneOf:
+      - description: Channel ID derived from reg
+        items:
+          enum:
+            - aspeed,ast2400-kcs-bmc-v2
+            - aspeed,ast2500-kcs-bmc-v2
+            - aspeed,ast2600-kcs-bmc
+
+      - description: Old-style with explicit channel ID, no reg
+        deprecated: true
+        items:
+          enum:
+            - aspeed,ast2400-kcs-bmc
+            - aspeed,ast2500-kcs-bmc
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    # maxItems: 3
+    items:
+      - description: IDR register
+      - description: ODR register
+      - description: STR register
+
+  aspeed,lpc-io-reg:
+    $ref: '/schemas/types.yaml#/definitions/uint32-array'
+    minItems: 1
+    maxItems: 2
+    description: |
+      The host CPU LPC IO data and status addresses for the device. For most
+      channels the status address is derived from the data address, but the
+      status address may be optionally provided.
+
+  aspeed,lpc-interrupts:
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    minItems: 2
+    maxItems: 2
+    description: |
+      A 2-cell property expressing the LPC SerIRQ number and the interrupt
+      level/sense encoding (specified in the standard fashion).
+
+      Note that the generated interrupt is issued from the BMC to the host, and
+      thus the target interrupt controller is not captured by the BMC's
+      devicetree.
+
+  kcs_chan:
+    deprecated: true
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: The LPC channel number in the controller
+
+  kcs_addr:
+    deprecated: true
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: The host CPU IO map address
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - aspeed,ast2400-kcs-bmc
+              - aspeed,ast2500-kcs-bmc
+    then:
+      required:
+        - kcs_chan
+        - kcs_addr
+    else:
+      required:
+        - reg
+        - aspeed,lpc-io-reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    kcs3: kcs@24 {
+        compatible = "aspeed,ast2600-kcs-bmc";
+        reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+        aspeed,lpc-io-reg = <0xca2>;
+        aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        interrupts = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
deleted file mode 100644
index d98a9bf45d6c..000000000000
--- a/Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Aspeed KCS (Keyboard Controller Style) IPMI interface
-
-The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
-(Baseboard Management Controllers) and the KCS interface can be
-used to perform in-band IPMI communication with their host.
-
-Required properties:
-- compatible : should be one of
-    "aspeed,ast2400-kcs-bmc"
-    "aspeed,ast2500-kcs-bmc"
-- interrupts : interrupt generated by the controller
-- kcs_chan : The LPC channel number in the controller
-- kcs_addr : The host CPU IO map address
-
-
-Example:
-
-    kcs3: kcs3@0 {
-        compatible = "aspeed,ast2500-kcs-bmc";
-        reg = <0x0 0x80>;
-        interrupts = <8>;
-        kcs_chan = <3>;
-        kcs_addr = <0xCA2>;
-        status = "okay";
-    };
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
new file mode 100644
index 000000000000..71bc031c4fde
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ipmi-ipmb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IPMI IPMB device bindings
+
+description: IPMI IPMB device bindings
+
+maintainers:
+  - Corey Minyard <cminyard@mvista.com>
+
+properties:
+  compatible:
+    enum:
+      - ipmi-ipmb
+
+  device_type:
+    items:
+      - const: "ipmi"
+
+  reg:
+    maxItems: 1
+
+  bmcaddr:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: The address of the BMC on the IPMB bus.  Defaults to 0x20.
+
+  retry-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Time between retries of sends, in milliseconds.  Defaults to 250.
+
+  max-retries:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of retries before a failure is declared.  Defaults to 1.
+
+  slave-dev:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The slave i2c device.  If not present, the main device is used. This
+      lets you use two devices on the IPMB, one for master and one for slave,
+      in case you have a slave device that can only be a slave.  The slave
+      will receive messages and the master will transmit.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ipmi-ipmb@40 {
+                    compatible = "ipmi-ipmb";
+                    device_type = "ipmi";
+                    reg = <0x40>;
+                    bmcaddr = /bits/ 8 <0x20>;
+                    retry-time = <250>;
+                    max-retries = <1>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt
deleted file mode 100644
index d5f1a877ed3e..000000000000
--- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-IPMI device
-
-Required properties:
-- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt
-- device_type: should be ipmi
-- reg: Address and length of the register set for the device
-
-Optional properties:
-- interrupts: The interrupt for the device.  Without this the interface
-	is polled.
-- reg-size - The size of the register.  Defaults to 1
-- reg-spacing - The number of bytes between register starts.  Defaults to 1
-- reg-shift - The amount to shift the registers to the right to get the data
-	into bit zero.
-
-Example:
-
-smic@fff3a000 {
-	compatible = "ipmi-smic";
-	device_type = "ipmi";
-	reg = <0xfff3a000 0x1000>;
-	interrupts = <0 24 4>;
-	reg-size = <4>;
-	reg-spacing = <4>;
-};
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
new file mode 100644
index 000000000000..898e3267893a
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ipmi-smic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IPMI device bindings
+
+description: IPMI device bindings
+
+maintainers:
+  - Corey Minyard <cminyard@mvista.com>
+
+properties:
+  compatible:
+    enum:
+      - ipmi-kcs
+      - ipmi-smic
+      - ipmi-bt
+
+  device_type:
+    items:
+      - const: "ipmi"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Interface is polled if this property is omitted.
+    maxItems: 1
+
+  reg-size:
+    description: The access width of the register in bytes. Defaults to 1.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+
+  reg-spacing:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of bytes between register starts. Defaults to 1.
+
+  reg-shift:
+    description: |
+      The amount of bits to shift the register content to the right to get
+      the data into bit zero.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 56
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    smic@fff3a000 {
+        compatible = "ipmi-smic";
+        device_type = "ipmi";
+        reg = <0xfff3a000 0x1000>;
+        interrupts = <0 24 4>;
+        reg-size = <4>;
+        reg-spacing = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
index 352f5e9c759b..4fda76e63396 100644
--- a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
+++ b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
@@ -1,12 +1,13 @@
-* Nuvoton NPCM7xx KCS (Keyboard Controller Style) IPMI interface
+* Nuvoton NPCM KCS (Keyboard Controller Style) IPMI interface
 
-The Nuvoton SOCs (NPCM7xx) are commonly used as BMCs
+The Nuvoton SOCs (NPCM) are commonly used as BMCs
 (Baseboard Management Controllers) and the KCS interface can be
 used to perform in-band IPMI communication with their host.
 
 Required properties:
 - compatible : should be one of
     "nuvoton,npcm750-kcs-bmc"
+    "nuvoton,npcm845-kcs-bmc", "nuvoton,npcm750-kcs-bmc"
 - interrupts : interrupt generated by the controller
 - kcs_chan : The KCS channel number in the controller
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml
new file mode 100644
index 000000000000..3b60afbab68b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common backlight properties
+
+maintainers:
+  - Lee Jones <lee@kernel.org>
+  - Daniel Thompson <daniel.thompson@linaro.org>
+  - Jingoo Han <jingoohan1@gmail.com>
+
+description:
+  Backlight devices provide backlight for different types of graphical
+  displays. They are typically but not necessarily implemented using a white
+  LED powered by a boost converter.
+
+properties:
+  default-brightness:
+    description:
+      The default brightness that should be applied to the LED by the operating
+      system on start-up. The brightness should not exceed the brightness the
+      LED can provide.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  max-brightness:
+    description:
+      Normally the maximum brightness is determined by the hardware and this
+      property is not required. This property is used to put a software limit
+      on the brightness apart from what the driver says, as it could happen
+      that a LED can be made so bright that it gets damaged or causes damage
+      due to restrictions in a specific system, such as mounting conditions.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt
deleted file mode 100644
index 321be6640533..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-gpio-backlight bindings
-
-Required properties:
-  - compatible: "gpio-backlight"
-  - gpios: describes the gpio that is used for enabling/disabling the backlight.
-    refer to bindings/gpio/gpio.txt for more details.
-
-Optional properties:
-  - default-on: enable the backlight at boot.
-
-Example:
-	backlight {
-		compatible = "gpio-backlight";
-		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-		default-on;
-	};
diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
new file mode 100644
index 000000000000..3300451fcfd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: gpio-backlight bindings
+
+maintainers:
+  - Lee Jones <lee@kernel.org>
+  - Daniel Thompson <daniel.thompson@linaro.org>
+  - Jingoo Han <jingoohan1@gmail.com>
+
+properties:
+  compatible:
+    const: gpio-backlight
+
+  gpios:
+    description: The gpio that is used for enabling/disabling the backlight.
+    maxItems: 1
+
+  default-on:
+    description: enable the backlight at boot.
+    type: boolean
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    backlight {
+        compatible = "gpio-backlight";
+        gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+        default-on;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
new file mode 100644
index 000000000000..73fa59e62181
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd253.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTD253 and KTD259 one-wire backlight
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Kinetic Technologies KTD253 and KTD259 are white LED backlights
+  controlled by a single GPIO line. If you just turn on the backlight
+  it goes to maximum backlight then you can set the level of backlight
+  using pulses on the enable wire. This is sometimes referred to as
+  "expresswire".
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - kinetic,ktd253
+          - kinetic,ktd259
+
+  enable-gpios:
+    description: GPIO to use to enable/disable and dim the backlight.
+    maxItems: 1
+
+  default-brightness: true
+  max-brightness: true
+
+required:
+  - compatible
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    backlight {
+        compatible = "kinetic,ktd253";
+        enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+        default-brightness = <13>;
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
deleted file mode 100644
index 4c7dfbe7f67a..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-led-backlight bindings
-
-This binding is used to describe a basic backlight device made of LEDs.
-It can also be used to describe a backlight device controlled by the output of
-a LED driver.
-
-Required properties:
-  - compatible: "led-backlight"
-  - leds: a list of LEDs
-
-Optional properties:
-  - brightness-levels: Array of distinct brightness levels. The levels must be
-                       in the range accepted by the underlying LED devices.
-                       This is used to translate a backlight brightness level
-                       into a LED brightness level. If it is not provided, the
-                       identity mapping is used.
-
-  - default-brightness-level: The default brightness level.
-
-Example:
-
-	backlight {
-		compatible = "led-backlight";
-
-		leds = <&led1>, <&led2>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
new file mode 100644
index 000000000000..0793d0adc4ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/led-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: led-backlight bindings
+
+maintainers:
+  - Lee Jones <lee@kernel.org>
+  - Daniel Thompson <daniel.thompson@linaro.org>
+  - Jingoo Han <jingoohan1@gmail.com>
+
+description:
+  This binding is used to describe a basic backlight device made of LEDs. It
+  can also be used to describe a backlight device controlled by the output of
+  a LED driver.
+
+properties:
+  compatible:
+    const: led-backlight
+
+  leds:
+    description: A list of LED nodes
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+
+  brightness-levels:
+    description:
+      Array of distinct brightness levels. The levels must be in the range
+      accepted by the underlying LED devices. This is used to translate a
+      backlight brightness level into a LED brightness level. If it is not
+      provided, the identity mapping is used.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  default-brightness-level:
+    description:
+      The default brightness level (index into the array defined by the
+      "brightness-levels" property).
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - leds
+
+additionalProperties: false
+
+examples:
+  - |
+    backlight {
+        compatible = "led-backlight";
+
+        leds = <&led1>, <&led2>;
+        brightness-levels = <0 4 8 16 32 64 128 255>;
+        default-brightness-level = <6>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
index 08fe5cf8614a..3c9b4054ed9a 100644
--- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: TI LM3630A High-Efficiency Dual-String White LED
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
new file mode 100644
index 000000000000..5533b6562d92
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 Backlight
+
+maintainers:
+  - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  The MT6370 Backlight WLED driver supports up to a 29V output voltage for
+  4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
+  capability with 2048 current steps (11 bits, only for MT6370/MT6371) or
+  16384 current steps (14 bits, only for MT6372) in exponential or linear
+  mapping curves.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6370-backlight
+      - mediatek,mt6372-backlight
+
+  default-brightness:
+    minimum: 0
+
+  max-brightness:
+    minimum: 0
+
+  enable-gpios:
+    description: External backlight 'enable' pin
+    maxItems: 1
+
+  mediatek,bled-pwm-enable:
+    description: |
+      Enable external PWM input for backlight dimming
+    type: boolean
+
+  mediatek,bled-pwm-hys-enable:
+    description: |
+      Enable the backlight input-hysteresis for PWM mode
+    type: boolean
+
+  mediatek,bled-pwm-hys-input-th-steps:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [1, 4, 16, 64]
+    description: |
+      The selection of the upper and lower bounds threshold of backlight
+      PWM resolution. If we choose selection 64, the variation of PWM
+      resolution needs more than 64 steps.
+
+  mediatek,bled-ovp-shutdown:
+    description: |
+      Enable the backlight shutdown when OVP level triggered
+    type: boolean
+
+  mediatek,bled-ovp-microvolt:
+    enum: [17000000, 21000000, 25000000, 29000000]
+    description: |
+      Backlight OVP level selection.
+
+  mediatek,bled-ocp-shutdown:
+    description: |
+      Enable the backlight shutdown when OCP level triggerred.
+    type: boolean
+
+  mediatek,bled-ocp-microamp:
+    enum: [900000, 1200000, 1500000, 1800000]
+    description: |
+      Backlight OC level selection.
+
+  mediatek,bled-exponential-mode-enable:
+    description: |
+      Enable the exponential mode of backlight brightness. If this property
+      is not enabled, the default is to use linear mode.
+    type: boolean
+
+  mediatek,bled-channel-use:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Backlight LED channel to be used.
+      Each bit mapping to:
+        - 0: CH4
+        - 1: CH3
+        - 2: CH2
+        - 3: CH1
+    minimum: 1
+    maximum: 15
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: mediatek,mt6372-backlight
+
+then:
+  properties:
+    default-brightness:
+      maximum: 16384
+
+    max-brightness:
+      maximum: 16384
+
+else:
+  properties:
+    default-brightness:
+      maximum: 2048
+
+    max-brightness:
+      maximum: 2048
+
+required:
+  - compatible
+  - mediatek,bled-channel-use
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
deleted file mode 100644
index 64fa2fbd98c9..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-pwm-backlight bindings
-
-Required properties:
-  - compatible: "pwm-backlight"
-  - pwms: OF device-tree PWM specification (see PWM binding[0])
-  - power-supply: regulator for supply voltage
-
-Optional properties:
-  - pwm-names: a list of names for the PWM devices specified in the
-               "pwms" property (see PWM binding[0])
-  - enable-gpios: contains a single GPIO specifier for the GPIO which enables
-                  and disables the backlight (see GPIO binding[1])
-  - post-pwm-on-delay-ms: Delay in ms between setting an initial (non-zero) PWM
-                          and enabling the backlight using GPIO.
-  - pwm-off-delay-ms: Delay in ms between disabling the backlight using GPIO
-                      and setting PWM value to 0.
-  - brightness-levels: Array of distinct brightness levels. Typically these
-                       are in the range from 0 to 255, but any range starting at
-                       0 will do. The actual brightness level (PWM duty cycle)
-                       will be interpolated from these values. 0 means a 0% duty
-                       cycle (darkest/off), while the last value in the array
-                       represents a 100% duty cycle (brightest).
-  - default-brightness-level: The default brightness level (index into the
-                              array defined by the "brightness-levels" property).
-  - num-interpolated-steps: Number of interpolated steps between each value
-                            of brightness-levels table. This way a high
-                            resolution pwm duty cycle can be used without
-                            having to list out every possible value in the
-                            brightness-level array.
-
-[0]: Documentation/devicetree/bindings/pwm/pwm.txt
-[1]: Documentation/devicetree/bindings/gpio/gpio.txt
-
-Example:
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 5000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-		power-supply = <&vdd_bl_reg>;
-		enable-gpios = <&gpio 58 0>;
-		post-pwm-on-delay-ms = <10>;
-		pwm-off-delay-ms = <10>;
-	};
-
-Example using num-interpolation-steps:
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 5000000>;
-
-		brightness-levels = <0 2048 4096 8192 16384 65535>;
-		num-interpolated-steps = <2048>;
-		default-brightness-level = <4096>;
-
-		power-supply = <&vdd_bl_reg>;
-		enable-gpios = <&gpio 58 0>;
-	};
diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
new file mode 100644
index 000000000000..78fbe20a1758
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/pwm-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: pwm-backlight bindings
+
+maintainers:
+  - Lee Jones <lee@kernel.org>
+  - Daniel Thompson <daniel.thompson@linaro.org>
+  - Jingoo Han <jingoohan1@gmail.com>
+
+properties:
+  compatible:
+    const: pwm-backlight
+
+  pwms:
+    maxItems: 1
+
+  pwm-names: true
+
+  power-supply:
+    description: regulator for supply voltage
+
+  enable-gpios:
+    description:
+      Contains a single GPIO specifier for the GPIO which enables and disables
+      the backlight.
+    maxItems: 1
+
+  post-pwm-on-delay-ms:
+    description:
+      Delay in ms between setting an initial (non-zero) PWM and enabling the
+      backlight using GPIO.
+
+  pwm-off-delay-ms:
+    description:
+      Delay in ms between disabling the backlight using GPIO and setting PWM
+      value to 0.
+
+  brightness-levels:
+    description:
+      Array of distinct brightness levels. Typically these are in the range
+      from 0 to 255, but any range starting at 0 will do. The actual brightness
+      level (PWM duty cycle) will be interpolated from these values. 0 means a
+      0% duty cycle (darkest/off), while the last value in the array represents
+      a 100% duty cycle (brightest).
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  default-brightness-level:
+    description:
+      The default brightness level (index into the array defined by the
+      "brightness-levels" property).
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  num-interpolated-steps:
+    description:
+      Number of interpolated steps between each value of brightness-levels
+      table. This way a high resolution pwm duty cycle can be used without
+      having to list out every possible value in the brightness-level array.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+dependencies:
+  default-brightness-level: [brightness-levels]
+  num-interpolated-steps: [brightness-levels]
+
+required:
+  - compatible
+  - pwms
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    backlight {
+        compatible = "pwm-backlight";
+        pwms = <&pwm 0 5000000>;
+
+        brightness-levels = <0 4 8 16 32 64 128 255>;
+        default-brightness-level = <6>;
+
+        power-supply = <&vdd_bl_reg>;
+        enable-gpios = <&gpio 58 0>;
+        post-pwm-on-delay-ms = <10>;
+        pwm-off-delay-ms = <10>;
+    };
+
+  - |
+    // Example using num-interpolation-steps:
+    backlight {
+        compatible = "pwm-backlight";
+        pwms = <&pwm 0 5000000>;
+
+        brightness-levels = <0 2048 4096 8192 16384 65535>;
+        num-interpolated-steps = <2048>;
+        default-brightness-level = <4096>;
+
+        power-supply = <&vdd_bl_reg>;
+        enable-gpios = <&gpio 58 0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt
deleted file mode 100644
index c06863badfbd..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt
+++ /dev/null
@@ -1,154 +0,0 @@
-Binding for Qualcomm Technologies, Inc. WLED driver
-
-WLED (White Light Emitting Diode) driver is used for controlling display
-backlight that is part of PMIC on Qualcomm Technologies, Inc. reference
-platforms. The PMIC is connected to the host processor via SPMI bus.
-
-- compatible
-	Usage:        required
-	Value type:   <string>
-	Definition:   should be one of:
-			"qcom,pm8941-wled"
-			"qcom,pmi8998-wled"
-			"qcom,pm660l-wled"
-
-- reg
-	Usage:        required
-	Value type:   <prop encoded array>
-	Definition:   Base address of the WLED modules.
-
-- default-brightness
-	Usage:        optional
-	Value type:   <u32>
-	Definition:   brightness value on boot, value from: 0-4095.
-		      Default: 2048
-
-- label
-	Usage:        required
-	Value type:   <string>
-	Definition:   The name of the backlight device
-
-- qcom,cs-out
-	Usage:        optional
-	Value type:   <bool>
-	Definition:   enable current sink output.
-		      This property is supported only for PM8941.
-
-- qcom,cabc
-	Usage:        optional
-	Value type:   <bool>
-	Definition:   enable content adaptive backlight control.
-
-- qcom,ext-gen
-	Usage:        optional
-	Value type:   <bool>
-	Definition:   use externally generated modulator signal to dim.
-		      This property is supported only for PM8941.
-
-- qcom,current-limit
-	Usage:        optional
-	Value type:   <u32>
-	Definition:   mA; per-string current limit; value from 0 to 25 with
-		      1 mA step. Default 20 mA.
-		      This property is supported only for pm8941.
-
-- qcom,current-limit-microamp
-	Usage:        optional
-	Value type:   <u32>
-	Definition:   uA; per-string current limit; value from 0 to 30000 with
-		      2500 uA step. Default 25 mA.
-
-- qcom,current-boost-limit
-	Usage:        optional
-	Value type:   <u32>
-	Definition:   mA; boost current limit.
-		      For pm8941: one of: 105, 385, 525, 805, 980, 1260, 1400,
-		      1680. Default: 805 mA.
-		      For pmi8998: one of: 105, 280, 450, 620, 970, 1150, 1300,
-		      1500. Default: 970 mA.
-
-- qcom,switching-freq
-	Usage:        optional
-	Value type:   <u32>
-	 Definition:   kHz; switching frequency; one of: 600, 640, 685, 738,
-		       800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200,
-		       4800, 9600.
-		       Default: for pm8941: 1600 kHz
-				for pmi8998: 800 kHz
-
-- qcom,ovp
-	Usage:        optional
-	Value type:   <u32>
-	Definition:   V; Over-voltage protection limit; one of:
-		      27, 29, 32, 35. Default: 29V
-		      This property is supported only for PM8941.
-
-- qcom,ovp-millivolt
-	Usage:        optional
-	Value type:   <u32>
-	Definition:   mV; Over-voltage protection limit;
-		      For pmi8998: one of 18100, 19600, 29600, 31100.
-		      Default 29600 mV.
-		      If this property is not specified for PM8941, it
-		      falls back to "qcom,ovp" property.
-
-- qcom,num-strings
-	Usage:        optional
-	Value type:   <u32>
-	Definition:   #; number of led strings attached;
-		      value: For PM8941 from 1 to 3. Default: 2
-			     For PMI8998 from 1 to 4.
-
-- interrupts
-	Usage:        optional
-	Value type:   <prop encoded array>
-	Definition:   Interrupts associated with WLED. This should be
-		      "short" and "ovp" interrupts. Interrupts can be
-		      specified as per the encoding listed under
-		      Documentation/devicetree/bindings/spmi/
-		      qcom,spmi-pmic-arb.txt.
-
-- interrupt-names
-	Usage:        optional
-	Value type:   <string>
-	Definition:   Interrupt names associated with the interrupts.
-		      Must be "short" and "ovp". The short circuit detection
-		      is not supported for PM8941.
-
-- qcom,enabled-strings
-	Usage:        optional
-	Value tyoe:   <u32 array>
-	Definition:   Array of the WLED strings numbered from 0 to 3. Each
-		      string of leds are operated individually. Specify the
-		      list of strings used by the device. Any combination of
-		      led strings can be used.
-
-- qcom,external-pfet
-	Usage:        optional
-	Value type:   <bool>
-	Definition:   Specify if external PFET control for short circuit
-		      protection is used. This property is supported only
-		      for PMI8998.
-
-- qcom,auto-string-detection
-	Usage:        optional
-	Value type:   <bool>
-	Definition:   Enables auto-detection of the WLED string configuration.
-		      This feature is not supported for PM8941.
-
-
-Example:
-
-pm8941-wled@d800 {
-	compatible = "qcom,pm8941-wled";
-	reg = <0xd800>;
-	label = "backlight";
-
-	qcom,cs-out;
-	qcom,current-limit = <20>;
-	qcom,current-boost-limit = <805>;
-	qcom,switching-freq = <1600>;
-	qcom,ovp = <29>;
-	qcom,num-strings = <2>;
-	qcom,enabled-strings = <0 1>;
-};
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
new file mode 100644
index 000000000000..4c15693f7a01
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Qualcomm Technologies, Inc. WLED driver
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Kiran Gunda <kgunda@codeaurora.org>
+
+description: |
+  WLED (White Light Emitting Diode) driver is used for controlling display
+  backlight that is part of PMIC on Qualcomm Technologies, Inc. reference
+  platforms. The PMIC is connected to the host processor via SPMI bus.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8941-wled
+      - qcom,pmi8994-wled
+      - qcom,pmi8998-wled
+      - qcom,pm660l-wled
+      - qcom,pm6150l-wled
+      - qcom,pm8150l-wled
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  default-brightness:
+    description: |
+      brightness value on boot.
+
+  label: true
+
+  max-brightness:
+    description: |
+      Maximum brightness level.
+
+  qcom,cs-out:
+    description: |
+      enable current sink output.
+      This property is supported only for WLED3.
+    type: boolean
+
+  qcom,cabc:
+    description: |
+      enable content adaptive backlight control.
+    type: boolean
+
+  qcom,ext-gen:
+    description: |
+      use externally generated modulator signal to dim.
+      This property is supported only for WLED3.
+    type: boolean
+
+  qcom,current-limit:
+    description: |
+      mA; per-string current limit.
+      This property is supported only for WLED3.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 20
+    minimum: 0
+    maximum: 25
+
+  qcom,current-limit-microamp:
+    description: |
+      uA; per-string current limit.
+    default: 25
+    minimum: 0
+    maximum: 30000
+    multipleOf: 25
+
+  qcom,current-boost-limit:
+    description: |
+      mA; boost current limit.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  qcom,switching-freq:
+    description: |
+      kHz; switching frequency.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
+            2400, 3200, 4800, 9600 ]
+
+  qcom,ovp:
+    description: |
+      V; Over-voltage protection limit.
+      This property is supported only for WLED3.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 27, 29, 32, 35 ]
+    default: 29
+
+  qcom,ovp-millivolt:
+    description: |
+      Over-voltage protection limit. This property is for WLED4 only.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 18100, 19600, 29600, 31100 ]
+    default: 29600
+
+  qcom,num-strings:
+    description: |
+      number of led strings attached.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  qcom,enabled-strings:
+    description: |
+      Array of the WLED strings numbered from 0 to 3. Each
+      string of leds are operated individually. Specify the
+      list of strings used by the device. Any combination of
+      led strings can be used.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+
+  qcom,external-pfet:
+    description: |
+      Specify if external PFET control for short circuit
+      protection is used. This property is supported only
+      for WLED4.
+    type: boolean
+
+  qcom,auto-string-detection:
+    description: |
+      Enables auto-detection of the WLED string configuration.
+      This feature is not supported for WLED3.
+    type: boolean
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: over voltage protection interrupt.
+      - description: short circuit interrupt.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: ovp
+      - const: short
+
+  qcom,modulator-sel:
+    description: |
+      Selects the modulator used for brightness modulation.
+      Allowed values are,
+           0 - Modulator A
+           1 - Modulator B
+      This property is applicable only to WLED5 peripheral.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    default: 0
+
+  qcom,cabc-sel:
+    description: |
+      Selects the CABC pin signal used for brightness modulation.
+      Allowed values are,
+           0 - CABC disabled
+           1 - CABC 1
+           2 - CABC 2
+           3 - External signal (e.g. LPG) is used for dimming
+      This property is applicable only to WLED5 peripheral.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pm8941-wled
+
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+        qcom,current-boost-limit:
+          enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ]
+          default: 805
+
+        qcom,switching-freq:
+          default: 1600
+
+        qcom,num-strings:
+          enum: [ 1, 2, 3 ]
+
+        interrupts:
+          maxItems: 1
+
+        interrupt-names:
+          maxItems: 1
+
+    else:
+      properties:
+        reg:
+          minItems: 2
+
+        qcom,current-boost-limit:
+          enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ]
+          default: 970
+
+        qcom,switching-freq:
+          default: 800
+
+        qcom,num-strings:
+          enum: [ 1, 2, 3, 4 ]
+
+        interrupts:
+          minItems: 2
+
+        interrupt-names:
+          minItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8150l-wled
+
+    then:
+      properties:
+        default-brightness:
+          minimum: 0
+          maximum: 32767
+
+        max-brightness:
+          minimum: 0
+          maximum: 32767
+
+    else:
+      properties:
+        default-brightness:
+          minimum: 0
+          maximum: 4095
+
+        max-brightness:
+          minimum: 0
+          maximum: 4095
+
+required:
+  - compatible
+  - reg
+  - label
+
+additionalProperties: false
+
+examples:
+  - |
+    backlight@d800 {
+        compatible = "qcom,pm8941-wled";
+        reg = <0xd800 0x100>;
+        label = "backlight";
+
+        qcom,cs-out;
+        qcom,current-limit = <20>;
+        qcom,current-boost-limit = <805>;
+        qcom,switching-freq = <1600>;
+        qcom,ovp = <29>;
+        qcom,num-strings = <2>;
+        qcom,enabled-strings = <0 1>;
+     };
diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
new file mode 100644
index 000000000000..99e9e138fa92
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/richtek,rt4831-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4831 Backlight
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  RT4831 is a mutifunctional device that can provide power to the LCD display
+  and LCD backlight.
+
+  For the LCD backlight, it can provide four channel WLED driving capability.
+  Each channel driving current is up to 30mA
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: richtek,rt4831-backlight
+
+  default-brightness:
+    minimum: 0
+    maximum: 2048
+
+  max-brightness:
+    minimum: 0
+    maximum: 2048
+
+  richtek,pwm-enable:
+    description: |
+      Specify the backlight dimming following by PWM duty or by SW control.
+    type: boolean
+
+  richtek,bled-ovp-sel:
+    description: |
+      Backlight OVP level selection, currently support 17V/21V/25V/29V.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    default: 1
+    minimum: 0
+    maximum: 3
+
+  richtek,bled-ocp-microamp:
+    description: |
+      Backlight over current protection level.
+    enum: [900000, 1200000, 1500000, 1800000]
+
+  richtek,channel-use:
+    description: |
+      Backlight LED channel to be used.
+      BIT 0/1/2/3 is used to indicate led channel 1/2/3/4 enable or disable.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 15
+
+required:
+  - compatible
+  - richtek,channel-use
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index c60b994fe116..3c14a98430e1 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -27,30 +27,29 @@ properties:
       List of device current outputs the LED is connected to. The outputs are
       identified by the numbers that must be defined in the LED device binding
       documentation.
-    $ref: /schemas/types.yaml#definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   function:
     description:
       LED function. Use one of the LED_FUNCTION_* prefixed definitions
       from the header include/dt-bindings/leds/common.h. If there is no
       matching LED_FUNCTION available, add a new one.
-    $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
 
   color:
     description:
       Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
       the header include/dt-bindings/leds/common.h. If there is no matching
       LED_COLOR_ID available, add a new one.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
-    maximum: 8
+    maximum: 9
 
   function-enumerator:
     description:
       Integer to be used when more than one instance of the same function is
       needed, differing only with an ordinal number.
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   label:
     description:
@@ -67,8 +66,7 @@ properties:
       produced where the LED momentarily turns off (or on). The "keep" setting
       will keep the LED at whatever its current state is, without producing a
       glitch.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
     enum:
       - on
       - off
@@ -79,26 +77,29 @@ properties:
     description:
       This parameter, if present, is a string defining the trigger assigned to
       the LED.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
-    enum:
-        # LED will act as a back-light, controlled by the framebuffer system
-      - backlight
-        # LED will turn on (but for leds-gpio see "default-state" property in
-        # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
-      - default-on
-        # LED "double" flashes at a load average based rate
-      - heartbeat
-        # LED indicates disk activity
-      - disk-activity
-        # LED indicates IDE disk activity (deprecated), in new implementations
-        # use "disk-activity"
-      - ide-disk
-        # LED flashes at a fixed, configurable rate
-      - timer
-        # LED alters the brightness for the specified duration with one software
-        # timer (requires "led-pattern" property)
-      - pattern
+    $ref: /schemas/types.yaml#/definitions/string
+
+    oneOf:
+      - enum:
+            # LED will act as a back-light, controlled by the framebuffer system
+          - backlight
+            # LED will turn on (but for leds-gpio see "default-state" property in
+            # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
+          - default-on
+            # LED "double" flashes at a load average based rate
+          - heartbeat
+            # LED indicates disk activity
+          - disk-activity
+            # LED indicates IDE disk activity (deprecated), in new implementations
+            # use "disk-activity"
+          - ide-disk
+            # LED flashes at a fixed, configurable rate
+          - timer
+            # LED alters the brightness for the specified duration with one software
+            # timer (requires "led-pattern" property)
+          - pattern
+        # LED is triggered by SD/MMC activity
+      - pattern: "^mmc[0-9]+$"
 
   led-pattern:
     description: |
@@ -111,8 +112,7 @@ properties:
           brightness and duration (in ms).  The exact format is
           described in:
           Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint32-matrix
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
     items:
       minItems: 2
       maxItems: 2
@@ -131,6 +131,12 @@ properties:
       as a panic indicator.
     type: boolean
 
+  retain-state-shutdown:
+    description:
+      This property specifies that the LED should not be turned off or changed
+      when the system shuts down.
+    type: boolean
+
   trigger-sources:
     description: |
       List of devices which should be used as a source triggering this LED
@@ -146,7 +152,7 @@ properties:
       the device tree and be referenced by a phandle and a set of phandle
       arguments. A length of arguments should be specified by the
       #trigger-source-cells property in the source node.
-    $ref: /schemas/types.yaml#definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle-array
 
   # Required properties for flash LED child nodes:
   flash-max-microamp:
@@ -159,6 +165,8 @@ properties:
       Maximum timeout in microseconds after which the flash LED is turned off.
       Required for flash LED nodes with configurable timeout.
 
+additionalProperties: true
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
@@ -167,22 +175,24 @@ examples:
     led-controller {
         compatible = "gpio-leds";
 
-        led0 {
+        led-0 {
             function = LED_FUNCTION_STATUS;
             linux,default-trigger = "heartbeat";
             gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
         };
 
-        led1 {
+        led-1 {
             function = LED_FUNCTION_USB;
             gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
             trigger-sources = <&ohci_port1>, <&ehci_port1>;
         };
     };
 
-    led-controller@0 {
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
         compatible = "maxim,max77693-led";
-        reg = <0 0x100>;
 
         led {
             function = LED_FUNCTION_FLASH;
@@ -194,6 +204,9 @@ examples:
         };
     };
 
+  - |
+    #include <dt-bindings/leds/common.h>
+
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
new file mode 100644
index 000000000000..14bebe1ad8f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/cznic,turris-omnia-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CZ.NIC's Turris Omnia LEDs driver
+
+maintainers:
+  - Marek Behún <kabel@kernel.org>
+
+description:
+  This module adds support for the RGB LEDs found on the front panel of the
+  Turris Omnia router. There are 12 RGB LEDs that are controlled by a
+  microcontroller that communicates via the I2C bus. Each LED is described
+  as a subnode of this I2C device.
+
+properties:
+  compatible:
+    const: cznic,turris-omnia-leds
+
+  reg:
+    description: I2C slave address of the microcontroller.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^multi-led@[0-9a-b]$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    description:
+      This node represents one of the RGB LED devices on Turris Omnia.
+      No subnodes need to be added for subchannels since this controller only
+      supports RGB LEDs.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 11
+        description:
+          This property identifies one of the LEDs on the front panel of the
+          Turris Omnia router.
+
+    required:
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/leds/common.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@2b {
+            compatible = "cznic,turris-omnia-leds";
+            reg = <0x2b>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            multi-led@0 {
+                /*
+                 * No subnodes are needed, this controller only supports RGB
+                 * LEDs.
+                 */
+                reg = <0>;
+                color = <LED_COLOR_ID_MULTI>;
+                function = LED_FUNCTION_POWER;
+                linux,default-trigger = "heartbeat";
+            };
+
+            multi-led@a {
+                reg = <0xa>;
+                color = <LED_COLOR_ID_MULTI>;
+                function = LED_FUNCTION_INDICATOR;
+                function-enumerator = <1>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
new file mode 100644
index 000000000000..940333f2d69c
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/issi,is31fl319x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ISSI LED controllers bindings for IS31FL319{0,1,3,6,9}
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+description: |
+  The IS31FL319X are LED controllers with I2C interface.
+  Previously known as Si-En SN319{0,1,3,6,9}.
+
+  For more product information please see the links below:
+    https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf
+
+properties:
+  compatible:
+    enum:
+      - issi,is31fl3190
+      - issi,is31fl3191
+      - issi,is31fl3193
+      - issi,is31fl3196
+      - issi,is31fl3199
+      - si-en,sn3190
+      - si-en,sn3191
+      - si-en,sn3193
+      - si-en,sn3196
+      - si-en,sn3199
+
+  reg:
+    maxItems: 1
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO attached to the SDB pin.
+
+  audio-gain-db:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description: Audio gain selection for external analog modulation input.
+    enum: [0, 3, 6, 9, 12, 15, 18, 21]
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[1-9]$":
+    type: object
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        description: Index of the LED.
+        minimum: 1
+        maximum: 9
+
+      led-max-microamp:
+        description:
+          Note that a driver will take the lowest of all LED limits
+          since the chip has a single global setting. The lowest value
+          will be chosen due to the PWM specificity, where lower
+          brightness is achieved by reducing the duty-cycle of pulses
+          and not the current, which will always have its peak value
+          equal to led-max-microamp.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3190
+              - issi,is31fl3191
+              - issi,is31fl3193
+              - si-en,sn3190
+              - si-en,sn3191
+              - si-en,sn3193
+    then:
+      properties:
+        reg:
+          enum: [0x68, 0x69, 0x6a, 0x6b]
+
+        audio-gain-db: false
+
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            led-max-microamp:
+              default: 42000
+              enum: [5000, 10000, 17500, 30000, 42000]
+    else:
+      properties:
+        reg:
+          enum: [0x64, 0x65, 0x66, 0x67]
+
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            led-max-microamp:
+              default: 20000
+              enum: [5000, 10000, 15000, 20000, 25000, 30000, 35000, 40000]
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3190
+              - issi,is31fl3191
+              - si-en,sn3190
+              - si-en,sn3191
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3193
+              - si-en,sn3193
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3196
+              - si-en,sn3196
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 6
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@65 {
+            compatible = "issi,is31fl3196";
+            reg = <0x65>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+
+            led@1 {
+                reg = <1>;
+                label = "red:aux";
+                led-max-microamp = <10000>;
+            };
+
+            led@5 {
+                reg = <5>;
+                label = "green:power";
+                linux,default-trigger = "default-on";
+            };
+        };
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
new file mode 100644
index 000000000000..bac95a51afa1
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/kinetic,ktd2692.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: KTD2692 Flash LED Driver from Kinetic Technologies
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+description: |
+  KTD2692 is the ideal power solution for high-power flash LEDs.
+  It uses ExpressWire single-wire programming for maximum flexibility.
+
+  The ExpressWire interface through CTRL pin can control LED on/off and
+  enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+  Flash timeout, LVP(low voltage protection).
+
+  Also, When the AUX pin is pulled high while CTRL pin is high,
+  LED current will be ramped up to the flash-mode current level.
+
+properties:
+  compatible:
+    const: kinetic,ktd2692
+
+  ctrl-gpios:
+    maxItems: 1
+    description: Specifier of the GPIO connected to CTRL pin.
+
+  aux-gpios:
+    maxItems: 1
+    description: Specifier of the GPIO connected to CTRL pin.
+
+  vin-supply:
+    description: LED supply (2.7V to 5.5V).
+
+  led:
+    type: object
+    $ref: common.yaml#
+    description: Properties for the LED.
+    properties:
+      function: true
+      color: true
+      flash-max-timeout-us:
+        description: Flash LED maximum timeout.
+
+      led-max-microamp:
+        maximum: 300000
+        description: Minimum Threshold for Timer protection
+          is defined internally (Maximum 300mA).
+
+      flash-max-microamp:
+        maximum: 300000
+        description: Flash LED maximum current
+          Formula - I(uA) = 15000000 / Rset.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - ctrl-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    ktd2692 {
+      compatible = "kinetic,ktd2692";
+      ctrl-gpios = <&gpc0 1 0>;
+      aux-gpios = <&gpc0 2 0>;
+      vin-supply = <&vbat>;
+
+      led {
+        function = LED_FUNCTION_FLASH;
+        color = <LED_COLOR_ID_WHITE>;
+        flash-max-timeout-us = <250000>;
+        flash-max-microamp = <150000>;
+        led-max-microamp = <25000>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
deleted file mode 100644
index 62ed17ec075b..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-aat1290.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
-
-The device is controlled through two pins: FL_EN and EN_SET. The pins when,
-asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
-respectively. In order to add a capability of selecting the strobe signal source
-(e.g. CPU or camera sensor) there is an additional switch required, independent
-of the flash chip. The switch is controlled with pin control.
-
-Required properties:
-
-- compatible : Must be "skyworks,aat1290".
-- flen-gpios : Must be device tree identifier of the flash device FL_EN pin.
-- enset-gpios : Must be device tree identifier of the flash device EN_SET pin.
-
-Optional properties:
-- pinctrl-names : Must contain entries: "default", "host", "isp". Entries
-		"default" and "host" must refer to the same pin configuration
-		node, which sets the host as a strobe signal provider. Entry
-		"isp" must refer to the pin configuration node, which sets the
-		ISP as a strobe signal provider.
-
-A discrete LED element connected to the device must be represented by a child
-node - see Documentation/devicetree/bindings/leds/common.txt.
-
-Required properties of the LED child node:
-- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-                       Maximum flash LED supply current can be calculated using
-                       following formula: I = 1A * 162kohm / Rset.
-- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
-                         Maximum flash timeout can be calculated using following
-                         formula: T = 8.82 * 10^9 * Ct.
-
-Optional properties of the LED child node:
-- function : see Documentation/devicetree/bindings/leds/common.txt
-- color : see Documentation/devicetree/bindings/leds/common.txt
-- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-
-Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with
-a switch that allows for routing strobe signal either from the host or from
-the camera sensor):
-
-#include "exynos4412.dtsi"
-#include <dt-bindings/leds/common.h>
-
-led-controller {
-	compatible = "skyworks,aat1290";
-	flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
-	enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default", "host", "isp";
-	pinctrl-0 = <&camera_flash_host>;
-	pinctrl-1 = <&camera_flash_host>;
-	pinctrl-2 = <&camera_flash_isp>;
-
-	camera_flash: led {
-		function = LED_FUNCTION_FLASH;
-		color = <LED_COLOR_ID_WHITE>;
-		led-max-microamp = <520833>;
-		flash-max-microamp = <1012500>;
-		flash-max-timeout-us = <1940000>;
-	};
-};
-
-&pinctrl_0 {
-	camera_flash_host: camera-flash-host {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-val = <0>;
-	};
-
-	camera_flash_isp: camera-flash-isp {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-val = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
new file mode 100644
index 000000000000..e24b0d15ef01
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-aw2013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AWINIC AW2013 3-channel LED Driver
+
+maintainers:
+  - Nikita Travkin <nikitos.tr@gmail.com>
+
+description: |
+  The AW2013 is a 3-channel LED driver with I2C interface. It can control
+  LED brightness with PWM output.
+
+properties:
+  compatible:
+    const: awinic,aw2013
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Regulator providing power to the "VCC" pin.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-2]$":
+    type: object
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        description: Index of the LED.
+        minimum: 0
+        maximum: 2
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@45 {
+            compatible = "awinic,aw2013";
+            reg = <0x45>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            vcc-supply = <&pm8916_l17>;
+
+            led@0 {
+                reg = <0>;
+                led-max-microamp = <5000>;
+                function = LED_FUNCTION_INDICATOR;
+                color = <LED_COLOR_ID_RED>;
+            };
+
+            led@1 {
+                reg = <1>;
+                led-max-microamp = <5000>;
+                function = LED_FUNCTION_INDICATOR;
+                color = <LED_COLOR_ID_GREEN>;
+            };
+
+            led@2 {
+                reg = <2>;
+                led-max-microamp = <5000>;
+                function = LED_FUNCTION_INDICATOR;
+                color = <LED_COLOR_ID_BLUE>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
new file mode 100644
index 000000000000..52252fb6bb32
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's BCM63138 LEDs controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  This LEDs controller was first used on BCM63138 and later reused on BCM4908,
+  BCM6848, BCM6858, BCM63138, BCM63148, BCM63381 and BCM68360 SoCs.
+
+  It supports up to 32 LEDs that can be connected parallelly or serially. It
+  also includes limited support for hardware blinking.
+
+  Binding serially connected LEDs isn't documented yet.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm4908-leds
+              - brcm,bcm6848-leds
+              - brcm,bcm6858-leds
+              - brcm,bcm63148-leds
+              - brcm,bcm63381-leds
+              - brcm,bcm68360-leds
+          - const: brcm,bcm63138-leds
+      - const: brcm,bcm63138-leds
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[a-f0-9]+$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        maxItems: 1
+        description: LED pin number
+
+      active-low:
+        type: boolean
+        description: Makes LED active low
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    leds@ff800800 {
+        compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
+        reg = <0xff800800 0xdc>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@0 {
+            reg = <0x0>;
+            function = LED_FUNCTION_POWER;
+            color = <LED_COLOR_ID_GREEN>;
+            default-state = "on";
+        };
+
+        led@3 {
+            reg = <0x3>;
+            function = LED_FUNCTION_STATUS;
+            color = <LED_COLOR_ID_GREEN>;
+            active-low;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
deleted file mode 100644
index ccebce597f37..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
+++ /dev/null
@@ -1,319 +0,0 @@
-LEDs connected to Broadcom BCM6328 controller
-
-This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
-In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
-However, on some devices there are Serial LEDs (LEDs connected to a 74x164
-controller), which can either be controlled by software (exporting the 74x164
-as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
-by hardware using this driver.
-Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
-exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
-controlled, so the only chance to keep them working is by using this driver.
-
-BCM6328 LED controller has a HWDIS register, which controls whether a LED
-should be controlled by a hardware signal instead of the MODE register value,
-with 0 meaning hardware control enabled and 1 hardware control disabled. This
-is usually 1:1 for hardware to LED signals, but through the activity/link
-registers you have some limited control over rerouting the LEDs (as
-explained later in brcm,link-signal-sources). Even if a LED is hardware
-controlled you are still able to make it blink or light it up if it isn't,
-but you can't turn it off if the hardware decides to light it up. For this
-reason, hardware controlled LEDs aren't registered as LED class devices.
-
-Required properties:
-  - compatible : should be "brcm,bcm6328-leds".
-  - #address-cells : must be 1.
-  - #size-cells : must be 0.
-  - reg : BCM6328 LED controller address and size.
-
-Optional properties:
-  - brcm,serial-leds : Boolean, enables Serial LEDs.
-    Default : false
-  - brcm,serial-mux : Boolean, enables Serial LEDs multiplexing.
-    Default : false
-  - brcm,serial-clk-low : Boolean, makes clock signal active low.
-    Default : false
-  - brcm,serial-dat-low : Boolean, makes data signal active low.
-    Default : false
-  - brcm,serial-shift-inv : Boolean, inverts Serial LEDs shift direction.
-    Default : false
-
-Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
-
-LED sub-node required properties:
-  - reg : LED pin number (only LEDs 0 to 23 are valid).
-
-LED sub-node optional properties:
-  a) Optional properties for sub-nodes related to software controlled LEDs:
-    - label : see Documentation/devicetree/bindings/leds/common.txt
-    - active-low : Boolean, makes LED active low.
-      Default : false
-    - default-state : see
-      Documentation/devicetree/bindings/leds/common.txt
-    - linux,default-trigger : see
-      Documentation/devicetree/bindings/leds/common.txt
-
-  b) Optional properties for sub-nodes related to hardware controlled LEDs:
-    - brcm,hardware-controlled : Boolean, makes this LED hardware controlled.
-      Default : false
-    - brcm,link-signal-sources : An array of hardware link
-      signal sources. Up to four link hardware signals can get muxed into
-      these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
-      be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
-      4 to 7. A signal can be muxed to more than one LED, and one LED can
-      have more than one source signal.
-    - brcm,activity-signal-sources : An array of hardware activity
-      signal sources. Up to four activity hardware signals can get muxed into
-      these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
-      be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
-      4 to 7. A signal can be muxed to more than one LED, and one LED can
-      have more than one source signal.
-
-Examples:
-Scenario 1 : BCM6328 with 4 EPHY LEDs
-	leds0: led-controller@10000800 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10000800 0x24>;
-
-		alarm_red@2 {
-			reg = <2>;
-			active-low;
-			label = "red:alarm";
-		};
-		inet_green@3 {
-			reg = <3>;
-			active-low;
-			label = "green:inet";
-		};
-		power_green@4 {
-			reg = <4>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-		ephy0_spd@17 {
-			reg = <17>;
-			brcm,hardware-controlled;
-		};
-		ephy1_spd@18 {
-			reg = <18>;
-			brcm,hardware-controlled;
-		};
-		ephy2_spd@19 {
-			reg = <19>;
-			brcm,hardware-controlled;
-		};
-		ephy3_spd@20 {
-			reg = <20>;
-			brcm,hardware-controlled;
-		};
-	};
-
-Scenario 2 : BCM63268 with Serial/GPHY0 LEDs
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-		brcm,serial-leds;
-		brcm,serial-dat-low;
-		brcm,serial-shift-inv;
-
-		gphy0_spd0@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-		};
-		gphy0_spd1@1 {
-			reg = <1>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <1>;
-		};
-		inet_red@2 {
-			reg = <2>;
-			active-low;
-			label = "red:inet";
-		};
-		dsl_green@3 {
-			reg = <3>;
-			active-low;
-			label = "green:dsl";
-		};
-		usb_green@4 {
-			reg = <4>;
-			active-low;
-			label = "green:usb";
-		};
-		wps_green@7 {
-			reg = <7>;
-			active-low;
-			label = "green:wps";
-		};
-		inet_green@8 {
-			reg = <8>;
-			active-low;
-			label = "green:inet";
-		};
-		ephy0_act@9 {
-			reg = <9>;
-			brcm,hardware-controlled;
-		};
-		ephy1_act@10 {
-			reg = <10>;
-			brcm,hardware-controlled;
-		};
-		ephy2_act@11 {
-			reg = <11>;
-			brcm,hardware-controlled;
-		};
-		gphy0_act@12 {
-			reg = <12>;
-			brcm,hardware-controlled;
-		};
-		ephy0_spd@13 {
-			reg = <13>;
-			brcm,hardware-controlled;
-		};
-		ephy1_spd@14 {
-			reg = <14>;
-			brcm,hardware-controlled;
-		};
-		ephy2_spd@15 {
-			reg = <15>;
-			brcm,hardware-controlled;
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 3 : BCM6362 with 1 LED for each EPHY
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-			brcm,activity-signal-sources = <0>;
-			/* USB link/activity routed to USB LED */
-		};
-		inet@1 {
-			reg = <1>;
-			brcm,hardware-controlled;
-			brcm,activity-signal-sources = <1>;
-			/* INET activity routed to INET LED */
-		};
-		ephy0@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4>;
-			/* EPHY0 link routed to EPHY0 LED */
-		};
-		ephy1@5 {
-			reg = <5>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <5>;
-			/* EPHY1 link routed to EPHY1 LED */
-		};
-		ephy2@6 {
-			reg = <6>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <6>;
-			/* EPHY2 link routed to EPHY2 LED */
-		};
-		ephy3@7 {
-			reg = <7>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <7>;
-			/* EPHY3 link routed to EPHY3 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 4 : BCM6362 with 1 LED for all EPHYs
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0 1>;
-			brcm,activity-signal-sources = <0 1>;
-			/* USB/INET link/activity routed to USB LED */
-		};
-		ephy@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4 5 6 7>;
-			/* EPHY0/1/2/3 link routed to EPHY0 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 5 : BCM6362 with EPHY LEDs swapped
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-			brcm,activity-signal-sources = <0 1>;
-			/* USB link/act and INET act routed to USB LED */
-		};
-		ephy0@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <7>;
-			/* EPHY3 link routed to EPHY0 LED */
-		};
-		ephy1@5 {
-			reg = <5>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <6>;
-			/* EPHY2 link routed to EPHY1 LED */
-		};
-		ephy2@6 {
-			reg = <6>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <5>;
-			/* EPHY1 link routed to EPHY2 LED */
-		};
-		ephy3@7 {
-			reg = <7>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4>;
-			/* EPHY0 link routed to EPHY3 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
new file mode 100644
index 000000000000..51cc0d82c12e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
@@ -0,0 +1,404 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-bcm6328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to Broadcom BCM6328 controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+description: |
+  This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
+  In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
+  However, on some devices there are Serial LEDs (LEDs connected to a 74x164
+  controller), which can either be controlled by software (exporting the 74x164
+  as spi-gpio. See
+  Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware
+  using this driver.
+  Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
+  exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
+  controlled, so the only chance to keep them working is by using this driver.
+
+  BCM6328 LED controller has a HWDIS register, which controls whether a LED
+  should be controlled by a hardware signal instead of the MODE register value,
+  with 0 meaning hardware control enabled and 1 hardware control disabled. This
+  is usually 1:1 for hardware to LED signals, but through the activity/link
+  registers you have some limited control over rerouting the LEDs (as
+  explained later in brcm,link-signal-sources). Even if a LED is hardware
+  controlled you are still able to make it blink or light it up if it isn't,
+  but you can't turn it off if the hardware decides to light it up. For this
+  reason, hardware controlled LEDs aren't registered as LED class devices.
+
+  Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
+
+properties:
+  compatible:
+    const: brcm,bcm6328-leds
+
+  reg:
+    maxItems: 1
+
+  brcm,serial-leds:
+    type: boolean
+    description: Enables Serial LEDs.
+
+  brcm,serial-mux:
+    type: boolean
+    description: Enables Serial LEDs multiplexing.
+
+  brcm,serial-clk-low:
+    type: boolean
+    description: Makes clock signal active low.
+
+  brcm,serial-dat-low:
+    type: boolean
+    description: Makes data signal active low.
+
+  brcm,serial-shift-inv:
+    type: boolean
+    description: Inverts Serial LEDs shift direction.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "@[a-f0-9]+$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        items:
+          - maximum: 23
+        description: LED pin number (only LEDs 0 to 23 are valid).
+
+      active-low:
+        type: boolean
+        description: Makes LED active low.
+
+      brcm,hardware-controlled:
+        type: boolean
+        description: Makes this LED hardware controlled.
+
+      brcm,link-signal-sources:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        description: >
+          An array of hardware link signal sources. Up to four link hardware
+          signals can get muxed into these LEDs. Only valid for LEDs 0 to 7,
+          where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and signals 4 to
+          7 may be muxed to LEDs 4 to 7. A signal can be muxed to more than one
+          LED, and one LED can have more than one source signal.
+
+      brcm,activity-signal-sources:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        description: >
+          An array of hardware activity signal sources. Up to four activity
+          hardware signals can get muxed into these LEDs. Only valid for LEDs 0
+          to 7, where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and
+          signals 4 to 7 may be muxed to LEDs 4 to 7. A signal can be muxed to
+          more than one LED, and one LED can have more than one source signal.
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    /* BCM6328 with 4 EPHY LEDs */
+    led-controller@10000800 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10000800 0x24>;
+
+        alarm_red@2 {
+            reg = <2>;
+            active-low;
+            label = "red:alarm";
+        };
+
+        inet_green@3 {
+            reg = <3>;
+            active-low;
+            label = "green:inet";
+        };
+
+        power_green@4 {
+            reg = <4>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+
+        ephy0_spd@17 {
+            reg = <17>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_spd@18 {
+            reg = <18>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_spd@19 {
+            reg = <19>;
+            brcm,hardware-controlled;
+        };
+
+        ephy3_spd@20 {
+            reg = <20>;
+            brcm,hardware-controlled;
+        };
+    };
+  - |
+    /* BCM63268 with Serial/GPHY0 LEDs */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+        brcm,serial-leds;
+        brcm,serial-dat-low;
+        brcm,serial-shift-inv;
+
+        gphy0_spd0@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+        };
+
+        gphy0_spd1@1 {
+            reg = <1>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <1>;
+        };
+
+        inet_red@2 {
+            reg = <2>;
+            active-low;
+            label = "red:inet";
+        };
+
+        dsl_green@3 {
+            reg = <3>;
+            active-low;
+            label = "green:dsl";
+        };
+
+        usb_green@4 {
+            reg = <4>;
+            active-low;
+            label = "green:usb";
+        };
+
+        wps_green@7 {
+            reg = <7>;
+            active-low;
+            label = "green:wps";
+        };
+
+        inet_green@8 {
+            reg = <8>;
+            active-low;
+            label = "green:inet";
+        };
+
+        ephy0_act@9 {
+            reg = <9>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_act@10 {
+            reg = <10>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_act@11 {
+            reg = <11>;
+            brcm,hardware-controlled;
+        };
+
+        gphy0_act@12 {
+            reg = <12>;
+            brcm,hardware-controlled;
+        };
+
+        ephy0_spd@13 {
+            reg = <13>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_spd@14 {
+            reg = <14>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_spd@15 {
+            reg = <15>;
+            brcm,hardware-controlled;
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with 1 LED for each EPHY */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+            brcm,activity-signal-sources = <0>;
+            /* USB link/activity routed to USB LED */
+        };
+
+        inet@1 {
+            reg = <1>;
+            brcm,hardware-controlled;
+            brcm,activity-signal-sources = <1>;
+            /* INET activity routed to INET LED */
+        };
+
+        ephy0@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4>;
+            /* EPHY0 link routed to EPHY0 LED */
+        };
+
+        ephy1@5 {
+            reg = <5>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <5>;
+            /* EPHY1 link routed to EPHY1 LED */
+        };
+
+        ephy2@6 {
+            reg = <6>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <6>;
+            /* EPHY2 link routed to EPHY2 LED */
+        };
+
+        ephy3@7 {
+            reg = <7>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <7>;
+            /* EPHY3 link routed to EPHY3 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with 1 LED for all EPHYs */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0 1>;
+            brcm,activity-signal-sources = <0 1>;
+            /* USB/INET link/activity routed to USB LED */
+        };
+
+        ephy@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4 5 6 7>;
+            /* EPHY0/1/2/3 link routed to EPHY0 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with EPHY LEDs swapped */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+            brcm,activity-signal-sources = <0 1>;
+            /* USB link/act and INET act routed to USB LED */
+        };
+
+        ephy0@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <7>;
+            /* EPHY3 link routed to EPHY0 LED */
+        };
+
+        ephy1@5 {
+            reg = <5>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <6>;
+            /* EPHY2 link routed to EPHY1 LED */
+        };
+
+        ephy2@6 {
+            reg = <6>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <5>;
+            /* EPHY1 link routed to EPHY2 LED */
+        };
+
+        ephy3@7 {
+            reg = <7>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4>;
+            /* EPHY0 link routed to EPHY3 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
index da5708e7b43b..6e51c6b91ee5 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
@@ -3,7 +3,7 @@ LEDs connected to Broadcom BCM6358 controller
 This controller is present on BCM6358 and BCM6368.
 In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
 which can either be controlled by software (exporting the 74x164 as spi-gpio.
-See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
+See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or
 by hardware using this driver.
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
new file mode 100644
index 000000000000..31840e33dcf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-class-multicolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for the multicolor LED class.
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  Bindings for multi color LEDs show how to describe current outputs of
+  either integrated multi-color LED elements (like RGB, RGBW, RGBWA-UV
+  etc.) or standalone LEDs, to achieve logically grouped multi-color LED
+  modules. This is achieved by adding multi-led nodes layer to the
+  monochrome LED bindings.
+  The nodes and properties defined in this document are unique to the multicolor
+  LED class.  Common LED nodes and properties are inherited from the common.yaml
+  within this documentation directory.
+
+properties:
+  $nodename:
+    pattern: "^multi-led(@[0-9a-f])?$"
+
+  color:
+    description: |
+      For multicolor LED support this property should be defined as either
+      LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
+      include/linux/leds/common.h.
+    enum: [ 8, 9 ]
+
+required:
+  - color
+
+allOf:
+  - $ref: "common.yaml#"
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
index 0e75b185dd19..7ad2baeda0b0 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
@@ -24,8 +24,7 @@ patternProperties:
   "(^led-[0-9a-f]$|led)":
     type: object
 
-    allOf:
-      - $ref: common.yaml#
+    $ref: common.yaml#
 
     properties:
       gpios:
diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
deleted file mode 100644
index fc2603484544..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-LEDs connected to is31fl319x LED controller chip
-
-Required properties:
-- compatible : Should be any of
-	"issi,is31fl3190"
-	"issi,is31fl3191"
-	"issi,is31fl3193"
-	"issi,is31fl3196"
-	"issi,is31fl3199"
-	"si-en,sn3199".
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-- reg: 0x64, 0x65, 0x66, or 0x67.
-
-Optional properties:
-- audio-gain-db : audio gain selection for external analog modulation input.
-	Valid values: 0 - 21, step by 3 (rounded down)
-	Default: 0
-
-Each led is represented as a sub-node of the issi,is31fl319x device.
-There can be less leds subnodes than the chip can support but not more.
-
-Required led sub-node properties:
-- reg : number of LED line
-	Valid values: 1 - number of leds supported by the chip variant.
-
-Optional led sub-node properties:
-- label : see Documentation/devicetree/bindings/leds/common.txt.
-- linux,default-trigger :
-	see Documentation/devicetree/bindings/leds/common.txt.
-- led-max-microamp : (optional)
-	Valid values: 5000 - 40000, step by 5000 (rounded down)
-	Default: 20000 (20 mA)
-	Note: a driver will take the lowest of all led limits since the
-	chip has a single global setting. The lowest value will be chosen
-	due to the PWM specificity, where lower brightness is achieved
-	by reducing the dury-cycle of pulses and not the current, which
-	will always have its peak value equal to led-max-microamp.
-
-Examples:
-
-fancy_leds: leds@65 {
-	compatible = "issi,is31fl3196";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x65>;
-
-	red_aux: led@1 {
-		label = "red:aux";
-		reg = <1>;
-		led-max-microamp = <10000>;
-	};
-
-	green_power: led@5 {
-		label = "green:power";
-		reg = <5>;
-		linux,default-trigger = "default-on";
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
deleted file mode 100644
index 853737452580..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Kinetic Technologies - KTD2692 Flash LED Driver
-
-KTD2692 is the ideal power solution for high-power flash LEDs.
-It uses ExpressWire single-wire programming for maximum flexibility.
-
-The ExpressWire interface through CTRL pin can control LED on/off and
-enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
-Flash timeout, LVP(low voltage protection).
-
-Also, When the AUX pin is pulled high while CTRL pin is high,
-LED current will be ramped up to the flash-mode current level.
-
-Required properties:
-- compatible : Should be "kinetic,ktd2692".
-- ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
-- aux-gpios : Specifier of the GPIO connected to AUX pin.
-
-Optional properties:
-- vin-supply : "vin" LED supply (2.7V to 5.5V).
-  See Documentation/devicetree/bindings/regulator/regulator.txt
-
-A discrete LED element connected to the device must be represented by a child
-node - See Documentation/devicetree/bindings/leds/common.txt
-
-Required properties for flash LED child nodes:
-  See Documentation/devicetree/bindings/leds/common.txt
-- led-max-microamp : Minimum Threshold for Timer protection
-  is defined internally (Maximum 300mA).
-- flash-max-microamp : Flash LED maximum current
-  Formula : I(mA) = 15000 / Rset.
-- flash-max-timeout-us : Flash LED maximum timeout.
-
-Optional properties for flash LED child nodes:
-- label : See Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-ktd2692 {
-	compatible = "kinetic,ktd2692";
-	ctrl-gpios = <&gpc0 1 0>;
-	aux-gpios = <&gpc0 2 0>;
-	vin-supply = <&vbat>;
-
-	flash-led {
-		label = "ktd2692-flash";
-		led-max-microamp = <300000>;
-		flash-max-microamp = <1500000>;
-		flash-max-timeout-us = <1835000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-lgm.yaml b/Documentation/devicetree/bindings/leds/leds-lgm.yaml
new file mode 100644
index 000000000000..f8d7963c3a13
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lgm.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-lgm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain (LGM) SoC LED Serial Shift Output (SSO) Controller driver
+
+maintainers:
+  - Zhu, Yi Xin <Yixin.zhu@intel.com>
+  - Amireddy Mallikarjuna reddy <mallikarjunax.reddy@intel.com>
+
+properties:
+  compatible:
+    const: intel,lgm-ssoled
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sso
+      - const: fpid
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  ngpios:
+    minimum: 0
+    maximum: 32
+    description:
+      Number of GPIOs this controller provides.
+
+  intel,sso-update-rate-hz:
+    description:
+      Blink frequency for SOUTs in Hz.
+
+  led-controller:
+    type: object
+    description:
+      This sub-node must contain a sub-node for each leds.
+
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+
+        properties:
+          reg:
+            description: Index of the LED.
+            minimum: 0
+            maximum: 2
+
+          intel,sso-hw-trigger:
+            type: boolean
+            description: This property indicates Hardware driven/control LED.
+
+          intel,sso-hw-blink:
+            type: boolean
+            description: This property indicates Enable LED blink by Hardware.
+
+          intel,sso-blink-rate-hz:
+            description: LED HW blink frequency.
+
+          retain-state-suspended:
+            type: boolean
+            description: The suspend state of LED can be retained.
+
+          retain-state-shutdown:
+            type: boolean
+            description: Retain the state of the LED on shutdown.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/intel,lgm-clk.h>
+    #include <dt-bindings/leds/common.h>
+
+    ssogpio: ssogpio@e0d40000 {
+      compatible = "intel,lgm-ssoled";
+      reg = <0xE0D40000 0x2E4>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      ngpios = <32>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_ledc>;
+      clocks = <&cgu0 LGM_GCLK_LEDC0>, <&afeclk>;
+      clock-names = "sso", "fpid";
+      intel,sso-update-rate-hz = <250000>;
+
+      led-controller {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@0 {
+          reg = <0>;
+          function = "gphy";
+          color = <LED_COLOR_ID_GREEN>;
+          led-gpio = <&ssogpio 0 0>;
+        };
+
+        led@2 {
+          reg = <2>;
+          function = LED_FUNCTION_POWER;
+          color = <LED_COLOR_ID_GREEN>;
+          led-gpio = <&ssogpio 23 0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3532.txt b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
index 53793213dd52..097490a5ff91 100644
--- a/Documentation/devicetree/bindings/leds/leds-lm3532.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
@@ -102,4 +102,4 @@ led-controller@38 {
 };
 
 For more product information please see the links below:
-http://www.ti.com/product/LM3532
+https://www.ti.com/product/LM3532
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3601x.txt b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt
index 095dafb6ec7f..17e940025dc2 100644
--- a/Documentation/devicetree/bindings/leds/leds-lm3601x.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt
@@ -47,5 +47,5 @@ led-controller@64 {
 }
 
 For more product information please see the links below:
-http://www.ti.com/product/LM36010
-http://www.ti.com/product/LM36011
+https://www.ti.com/product/LM36010
+https://www.ti.com/product/LM36011
diff --git a/Documentation/devicetree/bindings/leds/leds-lm36274.txt b/Documentation/devicetree/bindings/leds/leds-lm36274.txt
index 39c230d59a4d..de6f4931fb31 100644
--- a/Documentation/devicetree/bindings/leds/leds-lm36274.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lm36274.txt
@@ -82,4 +82,4 @@ lm36274@11 {
 };
 
 For more product information please see the link below:
-http://www.ti.com/lit/ds/symlink/lm36274.pdf
+https://www.ti.com/lit/ds/symlink/lm36274.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
index 501468aa4d38..b1103d961d6c 100644
--- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
@@ -62,4 +62,4 @@ led-controller@36 {
 }
 
 For more product information please see the link below:
-http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
+https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3697.txt b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
index 63992d732959..221b37b6049b 100644
--- a/Documentation/devicetree/bindings/leds/leds-lm3697.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
@@ -70,4 +70,4 @@ led-controller@36 {
 }
 
 For more product information please see the link below:
-http://www.ti.com/lit/ds/symlink/lm3697.pdf
+https://www.ti.com/lit/ds/symlink/lm3697.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
new file mode 100644
index 000000000000..63da380748bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-lp50xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for LP50XX RGB LED from Texas Instruments.
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into
+  a LED group or control them individually.
+
+  The difference in these RGB LED drivers is the number of supported RGB
+  modules.
+
+  For more product information please see the link below:
+  https://www.ti.com/lit/ds/symlink/lp5012.pdf
+  https://www.ti.com/lit/ds/symlink/lp5024.pdf
+  https://www.ti.com/lit/ds/symlink/lp5036.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lp5009
+      - ti,lp5012
+      - ti,lp5018
+      - ti,lp5024
+      - ti,lp5030
+      - ti,lp5036
+
+  reg:
+    maxItems: 1
+    description:
+      I2C slave address
+      lp5009/12 - 0x14, 0x15, 0x16, 0x17
+      lp5018/24 - 0x28, 0x29, 0x2a, 0x2b
+      lp5030/36 - 0x30, 0x31, 0x32, 0x33
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO pin to enable/disable the device.
+
+  vled-supply:
+    description: LED supply.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^multi-led@[0-9a-f]$':
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minItems: 1
+        maxItems: 12
+        description:
+          This property denotes the LED module number(s) that is used on the
+          for the child node.  The LED modules can either be used stand alone
+          or grouped into a module bank.
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^led@[0-9a-f]+$":
+        type: object
+        $ref: common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@14 {
+            compatible = "ti,lp5009";
+            reg = <0x14>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            enable-gpios = <&gpio1 16>;
+
+            multi-led@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x1>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_CHARGING;
+
+                led@0 {
+                     reg = <0x0>;
+                     color = <LED_COLOR_ID_RED>;
+                };
+
+                led@1 {
+                     reg = <0x1>;
+                     color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@2 {
+                     reg = <0x2>;
+                     color = <LED_COLOR_ID_BLUE>;
+                };
+            };
+
+            multi-led@3 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x3>, <0x4>, <0x5>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_STANDBY;
+
+                led@3 {
+                    reg = <0x3>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+
+                led@4 {
+                    reg = <0x4>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@5 {
+                    reg = <0x5>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
deleted file mode 100644
index 1b66a413fb9d..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
+++ /dev/null
@@ -1,228 +0,0 @@
-Binding for TI/National Semiconductor LP55xx Led Drivers
-
-Required properties:
-- compatible: one of
-	national,lp5521
-	national,lp5523
-	ti,lp55231
-	ti,lp5562
-	ti,lp8501
-
-- reg: I2C slave address
-- clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
-
-Each child has own specific current settings
-- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
-- max-cur: Maximun current at each led channel.
-
-Optional properties:
-- enable-gpio: GPIO attached to the chip's enable pin
-- label: Used for naming LEDs
-- pwr-sel: LP8501 specific property. Power selection for output channels.
-         0: D1~9 are connected to VDD
-         1: D1~6 with VDD, D7~9 with VOUT
-         2: D1~6 with VOUT, D7~9 with VDD
-         3: D1~9 are connected to VOUT
-
-Alternatively, each child can have a specific channel name and trigger:
-- chan-name (optional): name of channel
-- linux,default-trigger (optional): see
-  Documentation/devicetree/bindings/leds/common.txt
-
-example 1) LP5521
-3 LED channels, external clock used. Channel names are 'lp5521_pri:channel0',
-'lp5521_pri:channel1' and 'lp5521_pri:channel2', with a heartbeat trigger
-on channel 0.
-
-lp5521@32 {
-	compatible = "national,lp5521";
-	reg = <0x32>;
-	label = "lp5521_pri";
-	clock-mode = /bits/ 8 <2>;
-
-	chan0 {
-		led-cur = /bits/ 8 <0x2f>;
-		max-cur = /bits/ 8 <0x5f>;
-		linux,default-trigger = "heartbeat";
-	};
-
-	chan1 {
-		led-cur = /bits/ 8 <0x2f>;
-		max-cur = /bits/ 8 <0x5f>;
-	};
-
-	chan2 {
-		led-cur = /bits/ 8 <0x2f>;
-		max-cur = /bits/ 8 <0x5f>;
-	};
-};
-
-example 2) LP5523
-9 LED channels with specific name. Internal clock used.
-The I2C slave address is configurable with ASEL1 and ASEL0 pins.
-Available addresses are 32/33/34/35h.
-
-ASEL1    ASEL0    Address
--------------------------
- GND      GND       32h
- GND      VEN       33h
- VEN      GND       34h
- VEN      VEN       35h
-
-lp5523@32 {
-	compatible = "national,lp5523";
-	reg = <0x32>;
-	clock-mode = /bits/ 8 <1>;
-
-	chan0 {
-		chan-name = "d1";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan1 {
-		chan-name = "d2";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan2 {
-		chan-name = "d3";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan3 {
-		chan-name = "d4";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan4 {
-		chan-name = "d5";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan5 {
-		chan-name = "d6";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan6 {
-		chan-name = "d7";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan7 {
-		chan-name = "d8";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan8 {
-		chan-name = "d9";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-};
-
-example 3) LP5562
-4 channels are defined.
-
-lp5562@30 {
-	compatible = "ti,lp5562";
-	reg = <0x30>;
-	clock-mode = /bits/8 <2>;
-
-	chan0 {
-		chan-name = "R";
-		led-cur = /bits/ 8 <0x20>;
-		max-cur = /bits/ 8 <0x60>;
-	};
-
-	chan1 {
-		chan-name = "G";
-		led-cur = /bits/ 8 <0x20>;
-		max-cur = /bits/ 8 <0x60>;
-	};
-
-	chan2 {
-		chan-name = "B";
-		led-cur = /bits/ 8 <0x20>;
-		max-cur = /bits/ 8 <0x60>;
-	};
-
-	chan3 {
-		chan-name = "W";
-		led-cur = /bits/ 8 <0x20>;
-		max-cur = /bits/ 8 <0x60>;
-	};
-};
-
-example 4) LP8501
-9 channels are defined. The 'pwr-sel' is LP8501 specific property.
-Others are same as LP5523.
-
-lp8501@32 {
-	compatible = "ti,lp8501";
-	reg = <0x32>;
-	clock-mode = /bits/ 8 <2>;
-	pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
-
-	chan0 {
-		chan-name = "d1";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan1 {
-		chan-name = "d2";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan2 {
-		chan-name = "d3";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan3 {
-		chan-name = "d4";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan4 {
-		chan-name = "d5";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan5 {
-		chan-name = "d6";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan6 {
-		chan-name = "d7";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan7 {
-		chan-name = "d8";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-
-	chan8 {
-		chan-name = "d9";
-		led-cur = /bits/ 8 <0x14>;
-		max-cur = /bits/ 8 <0x20>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
new file mode 100644
index 000000000000..7ec676e53851
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -0,0 +1,228 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-lp55xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI/National Semiconductor LP55xx and LP8501 LED Drivers
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Pavel Machek <pavel@ucw.cz>
+
+description: |
+  Bindings for the TI/National Semiconductor LP55xx and LP8501 multi channel
+  LED Drivers.
+
+  For more product information please see the link below:
+    https://www.ti.com/lit/gpn/lp5521
+    https://www.ti.com/lit/gpn/lp5523
+    https://www.ti.com/lit/gpn/lp55231
+    https://www.ti.com/lit/gpn/lp5562
+    https://www.ti.com/lit/gpn/lp8501
+
+properties:
+  compatible:
+    enum:
+      - national,lp5521
+      - national,lp5523
+      - ti,lp55231
+      - ti,lp5562
+      - ti,lp8501
+
+  reg:
+    maxItems: 1
+    description: I2C slave address
+
+  clock-mode:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Input clock mode
+    enum:
+      - 0 # automode
+      - 1 # internal
+      - 2 # external
+
+  enable-gpio:
+    maxItems: 1
+    description: |
+      GPIO attached to the chip's enable pin
+
+  pwr-sel:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      LP8501 specific property. Power selection for output channels.
+    enum:
+      - 0 # D1~9 are connected to VDD
+      - 1 # D1~6 with VDD, D7~9 with VOUT
+      - 2 # D1~6 with VOUT, D7~9 with VDD
+      - 3 # D1~9 are connected to VOUT
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "(^led@[0-9a-f]$|led)":
+    type: object
+    $ref: common.yaml#
+    properties:
+      led-cur:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        description: |
+          Current setting at each LED channel (mA x10, 0 if LED is not connected)
+        minimum: 0
+        maximum: 255
+
+      max-cur:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        description: Maximun current at each LED channel.
+
+      reg:
+        description: |
+          Output channel for the LED.  This is zero based channel identifier and
+          the data sheet is a one based channel identifier.
+          reg value to output to LED output number
+        enum:
+          - 0 # LED output D1
+          - 1 # LED output D2
+          - 2 # LED output D3
+          - 3 # LED output D4
+          - 4 # LED output D5
+          - 5 # LED output D6
+          - 6 # LED output D7
+          - 7 # LED output D8
+          - 8 # LED output D9
+
+      chan-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: name of channel
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@32 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "ti,lp8501";
+            reg = <0x32>;
+            clock-mode = /bits/ 8 <2>;
+            pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
+
+            led@0 {
+                reg = <0>;
+                chan-name = "d1";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@1 {
+                reg = <1>;
+                chan-name = "d2";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@2 {
+                reg = <2>;
+                chan-name = "d3";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@3 {
+                reg = <3>;
+                chan-name = "d4";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@4 {
+                reg = <4>;
+                chan-name = "d5";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@5 {
+                reg = <5>;
+                chan-name = "d6";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@6 {
+                reg = <6>;
+                chan-name = "d7";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@7 {
+                reg = <7>;
+                chan-name = "d8";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@8 {
+                reg = <8>;
+                chan-name = "d9";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+        };
+
+        led-controller@33 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "national,lp5523";
+            reg = <0x33>;
+            clock-mode = /bits/ 8 <0>;
+
+            multi-led@2 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x2>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_STANDBY;
+                linux,default-trigger = "heartbeat";
+
+                led@0 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x0>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@1 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x1>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+
+                led@6 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x6>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
index 9863220db4ba..8bb25749a3da 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -47,4 +47,4 @@ led-controller@2d {
 }
 
 For more product information please see the link below:
-http://www.ti.com/product/lp8860-q1
+https://www.ti.com/product/lp8860-q1
diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
index 8c43f1e1bf7d..c6f96cabd4d1 100644
--- a/Documentation/devicetree/bindings/leds/leds-max77650.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
@@ -49,3 +49,6 @@ required:
   - compatible
   - "#address-cells"
   - "#size-cells"
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
new file mode 100644
index 000000000000..69e579226d9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MT6360 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  This module is part of the MT6360 MFD device.
+  see Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
+  Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
+  and 4-channel RGB LED support Register/Flash/Breath Mode
+
+properties:
+  compatible:
+    const: mediatek,mt6360-led
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^(multi-)?led@[0-5]$":
+    type: object
+    $ref: common.yaml#
+    description:
+      Properties for a single LED.
+
+    properties:
+      reg:
+        description: Index of the LED.
+        enum:
+          - 0 # LED output ISINK1
+          - 1 # LED output ISINK2
+          - 2 # LED output ISINK3
+          - 3 # LED output ISINKML
+          - 4 # LED output FLASH1
+          - 5 # LED output FLASH2
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/leds/common.h>
+   led-controller {
+     compatible = "mediatek,mt6360-led";
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     multi-led@0 {
+       reg = <0>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_RGB>;
+       led-max-microamp = <24000>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       led@0 {
+         reg = <0>;
+         color = <LED_COLOR_ID_RED>;
+       };
+       led@1 {
+         reg = <1>;
+         color = <LED_COLOR_ID_GREEN>;
+       };
+       led@2 {
+         reg = <2>;
+         color = <LED_COLOR_ID_BLUE>;
+       };
+     };
+     led@3 {
+       reg = <3>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_WHITE>;
+       led-max-microamp = <150000>;
+     };
+     led@4 {
+       reg = <4>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <1>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+     led@5 {
+       reg = <5>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <2>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+   };
+
+  - |
+
+   led-controller {
+     compatible = "mediatek,mt6360-led";
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     led@0 {
+       reg = <0>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_RED>;
+       led-max-microamp = <24000>;
+     };
+     led@1 {
+       reg = <1>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_GREEN>;
+       led-max-microamp = <24000>;
+     };
+     led@2 {
+       reg = <2>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_BLUE>;
+       led-max-microamp = <24000>;
+     };
+     led@3 {
+       reg = <3>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_WHITE>;
+       led-max-microamp = <150000>;
+     };
+     led@4 {
+       reg = <4>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <1>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+     led@5 {
+       reg = <5>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <2>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+   };
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-pca955x.txt b/Documentation/devicetree/bindings/leds/leds-pca955x.txt
index 7984efb767b4..817f460f3a72 100644
--- a/Documentation/devicetree/bindings/leds/leds-pca955x.txt
+++ b/Documentation/devicetree/bindings/leds/leds-pca955x.txt
@@ -9,6 +9,7 @@ Required properties:
 	"nxp,pca9550"
 	"nxp,pca9551"
 	"nxp,pca9552"
+	"ibm,pca9552"
 	"nxp,pca9553"
 - #address-cells: must be 1
 - #size-cells: must be 0
@@ -26,9 +27,9 @@ LED sub-node properties:
 		from 0 to 15 for the pca9552
 		from 0 to  3 for the pca9553
 - type: (optional) either
-	PCA9532_TYPE_NONE
-	PCA9532_TYPE_LED
-	PCA9532_TYPE_GPIO
+	PCA955X_TYPE_NONE
+	PCA955X_TYPE_LED
+	PCA955X_TYPE_GPIO
 	see dt-bindings/leds/leds-pca955x.h (default to LED)
 - label : (optional)
 	see Documentation/devicetree/bindings/leds/common.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
new file mode 100644
index 000000000000..bd6ec04a8727
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm-multicolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Multi-color LEDs connected to PWM
+
+maintainers:
+  - Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+
+description: |
+  This driver combines several monochrome PWM LEDs into one multi-color
+  LED using the multicolor LED class.
+
+properties:
+  compatible:
+    const: pwm-leds-multicolor
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      max-brightness:
+        description:
+          Maximum brightness possible for the LED
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    patternProperties:
+      "^led-[0-9a-z]+$":
+        type: object
+        $ref: common.yaml#
+
+        additionalProperties: false
+
+        properties:
+          pwms:
+            maxItems: 1
+
+          pwm-names: true
+
+          active-low:
+            description: For PWMs where the LED is wired to supply rather than ground.
+            type: boolean
+
+          color: true
+
+        required:
+          - pwms
+          - color
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "pwm-leds-multicolor";
+
+        multi-led {
+            color = <LED_COLOR_ID_RGB>;
+            function = LED_FUNCTION_INDICATOR;
+            max-brightness = <65535>;
+
+            led-red {
+                pwms = <&pwm1 0 1000000>;
+                color = <LED_COLOR_ID_RED>;
+            };
+
+            led-green {
+                pwms = <&pwm2 0 1000000>;
+                color = <LED_COLOR_ID_GREEN>;
+            };
+
+            led-blue {
+                pwms = <&pwm3 0 1000000>;
+                color = <LED_COLOR_ID_BLUE>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt
deleted file mode 100644
index 6c6583c35f2f..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-pwm.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-LED connected to PWM
-
-Required properties:
-- compatible : should be "pwm-leds".
-
-Each LED is represented as a sub-node of the pwm-leds device.  Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-- pwms : PWM property to point to the PWM device (phandle)/port (id) and to
-  specify the period time to be used: <&phandle id period_ns>;
-- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device
-  For the pwms and pwm-names property please refer to:
-  Documentation/devicetree/bindings/pwm/pwm.txt
-- max-brightness : Maximum brightness possible for the LED
-- active-low : (optional) For PWMs where the LED is wired to supply
-  rather than ground.
-- label :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-twl_pwm: pwm {
-	/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
-	compatible = "ti,twl6030-pwm";
-	#pwm-cells = <2>;
-};
-
-twl_pwmled: pwmled {
-	/* provides one PWM (id 0 for Charing indicator LED) */
-	compatible = "ti,twl6030-pwmled";
-	#pwm-cells = <2>;
-};
-
-pwmleds {
-	compatible = "pwm-leds";
-	kpad {
-		label = "omap4::keypad";
-		pwms = <&twl_pwm 0 7812500>;
-		max-brightness = <127>;
-	};
-
-	charging {
-		label = "omap4:green:chrg";
-		pwms = <&twl_pwmled 0 7812500>;
-		max-brightness = <255>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
new file mode 100644
index 000000000000..fe4d5fd25913
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to PWM
+
+maintainers:
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  Each LED is represented as a sub-node of the pwm-leds device.  Each
+  node's name represents the name of the corresponding LED.
+
+properties:
+  compatible:
+    const: pwm-leds
+
+patternProperties:
+  "^led(-[0-9a-f]+)?$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      pwms:
+        maxItems: 1
+
+      pwm-names: true
+
+      max-brightness:
+        description:
+          Maximum brightness possible for the LED
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      active-low:
+        description:
+          For PWMs where the LED is wired to supply rather than ground.
+        type: boolean
+
+    required:
+      - pwms
+      - max-brightness
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "pwm-leds";
+
+        led-1 {
+            label = "omap4::keypad";
+            pwms = <&twl_pwm 0 7812500>;
+            max-brightness = <127>;
+        };
+
+        led-2 {
+            color = <LED_COLOR_ID_GREEN>;
+            function = LED_FUNCTION_CHARGING;
+            pwms = <&twl_pwmled 0 7812500>;
+            max-brightness = <255>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
new file mode 100644
index 000000000000..497db289169d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Light Pulse Generator
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: >
+  The Qualcomm Light Pulse Generator consists of three different hardware blocks;
+  a ramp generator with lookup table, the light pulse generator and a three
+  channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm660l-lpg
+      - qcom,pm8150b-lpg
+      - qcom,pm8150l-lpg
+      - qcom,pm8350c-pwm
+      - qcom,pm8916-pwm
+      - qcom,pm8941-lpg
+      - qcom,pm8994-lpg
+      - qcom,pmc8180c-lpg
+      - qcom,pmi8994-lpg
+      - qcom,pmi8998-lpg
+
+  "#pwm-cells":
+    const: 2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,power-source:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      power-source used to drive the output, as defined in the datasheet.
+      Should be specified if the TRILED block is present
+    enum: [0, 1, 3]
+
+  qcom,dtest:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: >
+      A list of integer pairs, where each pair represent the dtest line the
+      particular channel should be connected to and the flags denoting how the
+      value should be outputed, as defined in the datasheet. The number of
+      pairs should be the same as the number of channels.
+    items:
+      items:
+        - description: dtest line to attach
+        - description: flags for the attachment
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-9a-f]$":
+        type: object
+        $ref: common.yaml#
+
+patternProperties:
+  "^led@[0-9a-f]$":
+    type: object
+    $ref: common.yaml#
+
+    properties:
+      reg: true
+
+    required:
+      - reg
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      qcom,dtest = <0 0>,
+                   <0 0>,
+                   <0 0>,
+                   <4 1>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <1>;
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <0>;
+        default-state = "on";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <2>;
+      };
+
+      led@4 {
+        reg = <4>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <3>;
+      };
+    };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      multi-led {
+        color = <LED_COLOR_ID_RGB>;
+        function = LED_FUNCTION_STATUS;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@1 {
+          reg = <1>;
+          color = <LED_COLOR_ID_RED>;
+        };
+
+        led@2 {
+          reg = <2>;
+          color = <LED_COLOR_ID_GREEN>;
+        };
+
+        led@3 {
+          reg = <3>;
+          color = <LED_COLOR_ID_BLUE>;
+        };
+      };
+    };
+  - |
+    pwm-controller {
+      compatible = "qcom,pm8916-pwm";
+      #pwm-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-rt4505.yaml b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml
new file mode 100644
index 000000000000..5b0c74aa6723
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-rt4505.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4505 Single Channel LED Driver
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT4505 is a flash LED driver that can support up to 375mA and 1.5A for
+  torch and flash mode, respectively.
+
+  The data sheet can be found at:
+    https://www.richtek.com/assets/product_file/RT4505/DS4505-02.pdf
+
+properties:
+  compatible:
+    const: richtek,rt4505
+
+  reg:
+    description: I2C slave address of the controller.
+    maxItems: 1
+
+  led:
+    type: object
+    $ref: common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      led-controller@63 {
+        compatible = "richtek,rt4505";
+        reg = <0x63>;
+
+        rt4505_flash: led {
+          function = LED_FUNCTION_FLASH;
+          color = <LED_COLOR_ID_WHITE>;
+          led-max-microamp = <375000>;
+          flash-max-microamp = <1500000>;
+          flash-max-timeout-us = <800000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
new file mode 100644
index 000000000000..f68259619488
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-sgm3140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SGMICRO SGM3140 500mA Buck/Boost Charge Pump LED Driver
+
+maintainers:
+  - Luca Weiss <luca@z3ntu.xyz>
+
+description: |
+  The SGM3140 is a current-regulated charge pump which can regulate two current
+  levels for Flash and Torch modes.
+
+  The data sheet can be found at:
+    http://www.sg-micro.com/uploads/soft/20190626/1561535688.pdf
+
+properties:
+  compatible:
+    const: sgmicro,sgm3140
+
+  enable-gpios:
+    maxItems: 1
+    description: A connection to the 'EN' pin.
+
+  flash-gpios:
+    maxItems: 1
+    description: A connection to the 'FLASH' pin.
+
+  vin-supply:
+    description: Regulator providing power to the 'VIN' pin.
+
+  led:
+    type: object
+    $ref: common.yaml#
+
+required:
+  - compatible
+  - flash-gpios
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "sgmicro,sgm3140";
+        flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+        enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+        vin-supply = <&reg_dcdc1>;
+
+        sgm3140_flash: led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            flash-max-timeout-us = <250000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/maxim,max77693.yaml b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml
new file mode 100644
index 000000000000..e27f57bb52ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  There are two LED outputs available - FLED1 and FLED2. Each of them can
+  control a separate LED or they can be connected together to double the
+  maximum current for a single connected LED. One LED is represented by one
+  child node.
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77693-led
+
+  maxim,boost-mode:
+    description:
+      In boost mode the device can produce up to 1.2A of total current on both
+      outputs. The maximum current on each output is reduced to 625mA then. If
+      not enabled explicitly, boost setting defaults to LEDS_BOOST_FIXED in
+      case both current sources are used.
+      See LEDS_BOOST_* in include/dt-bindings/leds/common.h.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  maxim,boost-mvout:
+    description: |
+      Output voltage of the boost module in millivolts.
+      Valid values: 3300 - 5500, step by 25 (rounded down)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3300
+    maximum: 5500
+    default: 3300
+
+  maxim,mvsys-min:
+    description: |
+      Low input voltage level in millivolts. Flash is not fired if chip
+      estimates that system voltage could drop below this level due to flash
+      power consumption.
+      Valid values: 2400 - 3400, step by 33 (rounded down)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2400
+    maximum: 3400
+    default: 2400
+
+patternProperties:
+  "^([a-z]+-)?led[01]?$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-sources:
+        allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              minimum: 0
+              maximum: 1
+
+      led-max-microamp:
+        description: |
+          Valid values for a LED connected to one FLED output:
+            15625 - 250000, step by 15625 (rounded down)
+          Valid values for a LED connected to both FLED outputs:
+            15625 - 500000, step by 15625 (rounded down)
+
+      flash-max-microamp:
+        description: |
+          Valid values for a single LED connected to one FLED output
+          (boost mode must be turned off):
+            15625 - 1000000, step by 15625 (rounded down)
+          Valid values for a single LED connected to both FLED outputs:
+            15625 - 1250000, step by 15625 (rounded down)
+          Valid values for two LEDs case:
+            15625 - 625000, step by 15625 (rounded down)
+
+      flash-max-timeout-us:
+        description: |
+          Valid values: 62500 - 1000000, step by 62500 (rounded down)
+        minimum: 62500
+        maximum: 1000000
+
+    required:
+      - flash-max-microamp
+      - flash-max-timeout-us
+      - led-max-microamp
+      - led-sources
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
new file mode 100644
index 000000000000..e9d02ed6a590
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/mediatek,mt6370-flashlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Flash LED driver for MT6370 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Alice Chen <alice_chen@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Add MT6370 flash LED driver include 2-channel flash LED support Torch/Strobe Mode.
+
+properties:
+  compatible:
+    const: mediatek,mt6370-flashlight
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-1]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1]
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
new file mode 100644
index 000000000000..16b3abc2af3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/mediatek,mt6370-indicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MT6370 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Alice Chen <alice_chen@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Add MT6370 LED driver include 4-channel RGB LED support Register/PWM/Breath Mode
+
+properties:
+  compatible:
+    const: mediatek,mt6370-indicator
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^multi-led@[0-3]$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3]
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            enum: [0, 1, 2]
+
+        required:
+          - reg
+          - color
+
+    required:
+      - reg
+      - color
+      - "#address-cells"
+      - "#size-cells"
+
+  "^led@[0-3]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3]
+
+    required:
+      - reg
+      - color
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.txt b/Documentation/devicetree/bindings/leds/register-bit-led.txt
deleted file mode 100644
index c7af6f70a97b..000000000000
--- a/Documentation/devicetree/bindings/leds/register-bit-led.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-Device Tree Bindings for Register Bit LEDs
-
-Register bit leds are used with syscon multifunctional devices
-where single bits in a certain register can turn on/off a
-single LED. The register bit LEDs appear as children to the
-syscon device, with the proper compatible string. For the
-syscon bindings see:
-Documentation/devicetree/bindings/mfd/syscon.yaml
-
-Each LED is represented as a sub-node of the syscon device. Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-
-Required properties:
-- compatible : must be "register-bit-led"
-- offset : register offset to the register controlling this LED
-- mask : bit mask for the bit controlling this LED in the register
-  typically 0x01, 0x02, 0x04 ...
-
-Optional properties:
-- label : (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger : (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- default-state: (optional) The initial state of the LED
-  see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-syscon: syscon@10000000 {
-	compatible = "arm,realview-pb1176-syscon", "syscon";
-	reg = <0x10000000 0x1000>;
-
-	led@8.0 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x01>;
-		label = "versatile:0";
-		linux,default-trigger = "heartbeat";
-		default-state = "on";
-	};
-	led@8.1 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x02>;
-		label = "versatile:1";
-		linux,default-trigger = "mmc0";
-		default-state = "off";
-	};
-	led@8.2 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x04>;
-		label = "versatile:2";
-		linux,default-trigger = "cpu0";
-		default-state = "off";
-	};
-	led@8.3 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x08>;
-		label = "versatile:3";
-		default-state = "off";
-	};
-	led@8.4 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x10>;
-		label = "versatile:4";
-		default-state = "off";
-	};
-	led@8.5 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x20>;
-		label = "versatile:5";
-		default-state = "off";
-	};
-	led@8.6 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x40>;
-		label = "versatile:6";
-		default-state = "off";
-	};
-	led@8.7 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x80>;
-		label = "versatile:7";
-		default-state = "off";
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.yaml b/Documentation/devicetree/bindings/leds/register-bit-led.yaml
new file mode 100644
index 000000000000..79b8fc0f9d23
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/register-bit-led.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/register-bit-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device Tree Bindings for Register Bit LEDs
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  Register bit leds are used with syscon multifunctional devices where single
+  bits in a certain register can turn on/off a single LED. The register bit LEDs
+  appear as children to the syscon device, with the proper compatible string.
+  For the syscon bindings see:
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+allOf:
+  - $ref: /schemas/leds/common.yaml#
+
+properties:
+  $nodename:
+    description:
+      The unit-address is in the form of @<reg addr>,<bit offset>
+    pattern: '^led@[0-9a-f]+,[0-9a-f]{1,2}$'
+
+  compatible:
+    const: register-bit-led
+
+  reg:
+    description:
+      The register address and size
+    maxItems: 1
+
+  mask:
+    description:
+      bit mask for the bit controlling this LED in the register
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      [ 0x1, 0x2, 0x4, 0x8, 0x10, 0x20, 0x40, 0x80, 0x100, 0x200, 0x400, 0x800,
+        0x1000, 0x2000, 0x4000, 0x8000, 0x10000, 0x20000, 0x40000, 0x80000,
+        0x100000, 0x200000, 0x400000, 0x800000, 0x1000000, 0x2000000, 0x4000000,
+        0x8000000, 0x10000000, 0x20000000, 0x40000000, 0x80000000 ]
+
+  offset:
+    description:
+      register offset to the register controlling this LED
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+
+required:
+  - compatible
+  - mask
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    syscon@10000000 {
+        compatible = "arm,realview-pb1176-syscon", "syscon";
+        reg = <0x10000000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x10000000 0x1000>;
+
+        led@8,0 {
+            compatible = "register-bit-led";
+            reg = <0x08 0x04>;
+            offset = <0x08>;
+            mask = <0x01>;
+            label = "versatile:0";
+            linux,default-trigger = "heartbeat";
+            default-state = "on";
+        };
+        led@8,1 {
+            compatible = "register-bit-led";
+            reg = <0x08 0x04>;
+            offset = <0x08>;
+            mask = <0x02>;
+            label = "versatile:1";
+            default-state = "off";
+        };
+        led@8,2 {
+            compatible = "register-bit-led";
+            reg = <0x08 0x04>;
+            offset = <0x08>;
+            mask = <0x04>;
+            label = "versatile:2";
+            default-state = "off";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/regulator-led.yaml b/Documentation/devicetree/bindings/leds/regulator-led.yaml
new file mode 100644
index 000000000000..3e020d700c00
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/regulator-led.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/regulator-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device Tree Bindings for Regulator LEDs
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Regulator LEDs are powered by a single regulator such that they can
+  be turned on or off by enabling or disabling the regulator. The available
+  brightness settings will be inferred from the available voltages on the
+  regulator, and any constraints on the voltage or current will need to be
+  specified on the regulator.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  $nodename:
+    pattern: '^led.*$'
+
+  compatible:
+    const: regulator-led
+
+  vled-supply:
+    description:
+      The regulator controlling the current to the LED.
+
+  function: true
+  color: true
+  linux,default-trigger: true
+  default-state: true
+
+required:
+  - compatible
+  - vled-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-heartbeat {
+        compatible = "regulator-led";
+        vled-supply = <&regulator>;
+        function = LED_FUNCTION_STATUS;
+        color = <LED_COLOR_ID_BLUE>;
+        linux,default-trigger = "heartbeat";
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml
new file mode 100644
index 000000000000..68c328eec03b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/richtek,rt8515.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT8515 1.5A dual channel LED driver
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Richtek RT8515 is a dual channel (two mode) LED driver that
+  supports driving a white LED in flash or torch mode. The maximum
+  current for each mode is defined in hardware using two resistors
+  RFS and RTS.
+
+properties:
+  compatible:
+    const: richtek,rt8515
+
+  enf-gpios:
+    maxItems: 1
+    description: A connection to the 'ENF' (enable flash) pin.
+
+  ent-gpios:
+    maxItems: 1
+    description: A connection to the 'ENT' (enable torch) pin.
+
+  richtek,rfs-ohms:
+    minimum: 7680
+    maximum: 367000
+    description: The resistance value of the RFS resistor. This
+      resistors limits the maximum flash current. This must be set
+      for the property flash-max-microamp to work, the RFS resistor
+      defines the range of the dimmer setting (brightness) of the
+      flash LED.
+
+  richtek,rts-ohms:
+    minimum: 7680
+    maximum: 367000
+    description: The resistance value of the RTS resistor. This
+      resistors limits the maximum torch current. This must be set
+      for the property torch-max-microamp to work, the RTS resistor
+      defines the range of the dimmer setting (brightness) of the
+      torch LED.
+
+  led:
+    type: object
+    $ref: common.yaml#
+    properties:
+      function: true
+      color: true
+      flash-max-timeout-us: true
+
+      flash-max-microamp:
+        maximum: 700000
+        description: The maximum current for flash mode
+          is hardwired to the component using the RFS resistor to
+          ground. The maximum hardware current setting is calculated
+          according to the formula Imax = 5500 / RFS. The lowest
+          allowed resistance value is 7.86 kOhm giving an absolute
+          maximum current of 700mA. By setting this attribute in
+          the device tree, you can further restrict the maximum
+          current below the hardware limit. This requires the RFS
+          to be defined as it defines the maximum range.
+
+      led-max-microamp:
+        maximum: 700000
+        description: The maximum current for torch mode
+          is hardwired to the component using the RTS resistor to
+          ground. The maximum hardware current setting is calculated
+          according to the formula Imax = 5500 / RTS. The lowest
+          allowed resistance value is 7.86 kOhm giving an absolute
+          maximum current of 700mA. By setting this attribute in
+          the device tree, you can further restrict the maximum
+          current below the hardware limit. This requires the RTS
+          to be defined as it defines the maximum range.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - ent-gpios
+  - enf-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "richtek,rt8515";
+        enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+        ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+        richtek,rfs-ohms = <16000>;
+        richtek,rts-ohms = <100000>;
+
+        led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            flash-max-timeout-us = <250000>;
+            flash-max-microamp = <150000>;
+            led-max-microamp = <25000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
index b50f4bcc98f1..86a37c92b834 100644
--- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
@@ -34,11 +34,10 @@ patternProperties:
         #- $ref: "common.yaml#"
       rohm,led-compatible:
         description: LED identification string
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/string"
-          - enum:
-            - bd71828-ambled
-            - bd71828-grnled
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum:
+          - bd71828-ambled
+          - bd71828-grnled
       function:
         description:
           Purpose of LED as defined in dt-bindings/leds/common.h
@@ -50,3 +49,6 @@ patternProperties:
 
 required:
   - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
new file mode 100644
index 000000000000..a6aaa92dbccd
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/skyworks,aat1290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The device is controlled through two pins:: FL_EN and EN_SET. The pins when,
+  asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
+  respectively. In order to add a capability of selecting the strobe signal
+  source (e.g. CPU or camera sensor) there is an additional switch required,
+  independent of the flash chip. The switch is controlled with pin control.
+
+properties:
+  compatible:
+    const: skyworks,aat1290
+
+  enset-gpios:
+    maxItems: 1
+    description: EN_SET pin
+
+  flen-gpios:
+    maxItems: 1
+    description: FL_EN pin
+
+  led:
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-max-microamp: true
+
+      flash-max-microamp:
+        description: |
+          Maximum flash LED supply current can be calculated using following
+          formula:: I = 1A * 162 kOhm / Rset.
+
+      flash-max-timeout-us:
+        description: |
+          Maximum flash timeout can be calculated using following formula::
+            T = 8.82 * 10^9 * Ct.
+
+    required:
+      - flash-max-microamp
+      - flash-max-timeout-us
+      - led-max-microamp
+
+  pinctrl-names:
+    items:
+      - const: default
+      - const: host
+      - const: isp
+
+  pinctrl-0: true
+  pinctrl-1: true
+  pinctrl-2: true
+
+required:
+  - compatible
+  - enset-gpios
+  - flen-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    // Ct = 220 nF, Rset = 160 kOhm
+    led-controller {
+        compatible = "skyworks,aat1290";
+        flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+        enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+        pinctrl-names = "default", "host", "isp";
+        pinctrl-0 = <&camera_flash_host>;
+        pinctrl-1 = <&camera_flash_host>;
+        pinctrl-2 = <&camera_flash_isp>;
+
+        led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            led-max-microamp = <520833>;
+            flash-max-microamp = <1012500>;
+            flash-max-timeout-us = <1940000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/tca6507.txt b/Documentation/devicetree/bindings/leds/tca6507.txt
deleted file mode 100644
index bad9102796f3..000000000000
--- a/Documentation/devicetree/bindings/leds/tca6507.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-LEDs connected to tca6507
-
-Required properties:
-- compatible : should be : "ti,tca6507".
-- #address-cells: must be 1
-- #size-cells: must be 0
-- reg: typically 0x45.
-
-Optional properties:
-- gpio-controller: allows lines to be used as output-only GPIOs.
-- #gpio-cells: if present, must not be 0.
-
-Each led is represented as a sub-node of the ti,tca6507 device.
-
-LED sub-node properties:
-- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
-- reg : number of LED line (could be from 0 to 6)
-- linux,default-trigger : (optional)
-   see Documentation/devicetree/bindings/leds/common.txt
-- compatible: either "led" (the default) or "gpio".
-
-Examples:
-
-tca6507@45 {
-	compatible = "ti,tca6507";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x45>;
-
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	led0: red-aux@0 {
-		label = "red:aux";
-		reg = <0x0>;
-	};
-
-	led1: green-aux@1 {
-		label = "green:aux";
-		reg = <0x5>;
-		linux,default-trigger = "default-on";
-	};
-
-	wifi-reset@6 {
-		reg = <0x6>;
-		compatible = "gpio";
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/leds/ti,tca6507.yaml b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
new file mode 100644
index 000000000000..32c600387895
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti,tca6507.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TCA6507 LED and GPIO controller
+
+maintainers:
+  - NeilBrown <neilb@suse.de>
+
+description:
+  The TCA6507 is a programmable LED controller connected via I2C that can drive
+  7 separate lines either by holding them low, or by pulsing them with modulated
+  width.
+
+properties:
+  compatible:
+    const: ti,tca6507
+
+  reg:
+    description: I2C slave address of the controller.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-line-names: true
+
+patternProperties:
+  "^led@[0-6]$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 6
+
+    required:
+      - reg
+
+  "^gpio@[0-6]$":
+    type: object
+
+    properties:
+      compatible:
+        const: gpio
+
+      reg:
+        minimum: 0
+        maximum: 6
+
+    additionalProperties: false
+
+    required:
+      - reg
+      - compatible
+
+if:
+  patternProperties:
+    "^gpio@[0-6]$":
+      type: object
+      properties:
+        compatible:
+          contains:
+            const: gpio
+then:
+  required:
+    - gpio-controller
+    - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@45 {
+            compatible = "ti,tca6507";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0x45>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            gpio-line-names = "wifi_reset@6";
+
+            led@0 {
+                label = "gta04:red:aux";
+                reg = <0x0>;
+            };
+
+            led@1 {
+                label = "gta04:green:aux";
+                reg = <0x1>;
+            };
+
+            led@3 {
+                reg = <0x3>;
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_POWER;
+                linux,default-trigger = "default-on";
+            };
+
+            led@4 {
+                color = <LED_COLOR_ID_GREEN>;
+                function = LED_FUNCTION_POWER;
+                reg = <0x4>;
+            };
+
+            gpio@6 {
+                compatible = "gpio";
+                reg = <0x6>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/trigger-source.yaml b/Documentation/devicetree/bindings/leds/trigger-source.yaml
index 0618003e40bd..89a1cde2b8aa 100644
--- a/Documentation/devicetree/bindings/leds/trigger-source.yaml
+++ b/Documentation/devicetree/bindings/leds/trigger-source.yaml
@@ -21,4 +21,6 @@ properties:
       trigger sources (e.g. a specific USB port).
     enum: [ 0, 1 ]
 
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml
new file mode 100644
index 000000000000..75d5d97305e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/allwinner,sun6i-a31-msgbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner sunxi Message Box
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description: |
+  The hardware message box on sun6i, sun8i, sun9i, and sun50i SoCs is a
+  two-user mailbox controller containing 8 unidirectional FIFOs. An interrupt
+  is raised for received messages, but software must poll to know when a
+  transmitted message has been acknowledged by the remote user. Each FIFO can
+  hold four 32-bit messages; when a FIFO is full, clients must wait before
+  attempting more transmissions.
+
+  Refer to ./mailbox.txt for generic information about mailbox device-tree
+  bindings.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - allwinner,sun8i-a83t-msgbox
+              - allwinner,sun8i-h3-msgbox
+              - allwinner,sun9i-a80-msgbox
+              - allwinner,sun50i-a64-msgbox
+              - allwinner,sun50i-h6-msgbox
+          - const: allwinner,sun6i-a31-msgbox
+      - const: allwinner,sun6i-a31-msgbox
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: bus clock
+
+  resets:
+    maxItems: 1
+    description: bus reset
+
+  interrupts:
+    maxItems: 1
+
+  '#mbox-cells':
+    const: 1
+    description: first cell is the channel number (0-7)
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - interrupts
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-h3-ccu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+    msgbox: mailbox@1c17000 {
+            compatible = "allwinner,sun8i-h3-msgbox",
+                         "allwinner,sun6i-a31-msgbox";
+            reg = <0x01c17000 0x1000>;
+            clocks = <&ccu CLK_BUS_MSGBOX>;
+            resets = <&ccu RST_BUS_MSGBOX>;
+            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+            #mbox-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
index 319280563648..dfd26b998189 100644
--- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson Message-Handling-Unit Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic's Meson SoCs Message-Handling-Unit (MHU) is a mailbox controller
@@ -41,6 +41,8 @@ required:
   - interrupts
   - "#mbox-cells"
 
+additionalProperties: false
+
 examples:
   - |
     mailbox@c883c404 {
@@ -49,4 +51,3 @@ examples:
           interrupts = <208>, <209>, <210>;
           #mbox-cells = <1>;
     };
-
diff --git a/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
new file mode 100644
index 000000000000..5c5c328b3134
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/apple,mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Mailbox Controller
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+  - Sven Peter <sven@svenpeter.dev>
+
+description:
+  The Apple mailbox consists of two FIFOs used to exchange 64+32 bit
+  messages between the main CPU and a co-processor. Multiple instances
+  of this mailbox can be found on Apple SoCs.
+  One of the two FIFOs is used to send data to a co-processor while the other
+  FIFO is used for the other direction.
+  Various clients implement different IPC protocols based on these simple
+  messages and shared memory buffers.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          ASC mailboxes are the most common variant found on the M1 used
+          for example for the display controller, the system management
+          controller and the NVMe coprocessor.
+        items:
+          - enum:
+              - apple,t8103-asc-mailbox
+              - apple,t6000-asc-mailbox
+          - const: apple,asc-mailbox-v4
+
+      - description:
+          M3 mailboxes are an older variant with a slightly different MMIO
+          interface still found on the M1. It is used for the Thunderbolt
+          co-processors.
+        items:
+          - enum:
+              - apple,t8103-m3-mailbox
+              - apple,t6000-m3-mailbox
+          - const: apple,m3-mailbox-v2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: send fifo is empty interrupt
+      - description: send fifo is not empty interrupt
+      - description: receive fifo is empty interrupt
+      - description: receive fifo is not empty interrupt
+
+  interrupt-names:
+    items:
+      - const: send-empty
+      - const: send-not-empty
+      - const: recv-empty
+      - const: recv-not-empty
+
+  "#mbox-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+        mailbox@77408000 {
+                compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+                reg = <0x77408000 0x4000>;
+                interrupts = <1 583 4>, <1 584 4>, <1 585 4>, <1 586 4>;
+                interrupt-names = "send-empty", "send-not-empty",
+                 "recv-empty", "recv-not-empty";
+                #mbox-cells = <0>;
+        };
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
new file mode 100644
index 000000000000..d9a4f4a02d7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/arm,mhu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM MHU Mailbox Controller
+
+maintainers:
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+description: |
+  The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has 3
+  independent channels/links to communicate with remote processor(s).  MHU links
+  are hardwired on a platform. A link raises interrupt for any received data.
+  However, there is no specified way of knowing if the sent data has been read
+  by the remote. This driver assumes the sender polls STAT register and the
+  remote clears it after having read the data.  The last channel is specified to
+  be a 'Secure' resource, hence can't be used by Linux running NS.
+
+  The MHU hardware also allows operations in doorbell mode. The MHU drives the
+  interrupt signal using a 32-bit register, with all 32-bits logically ORed
+  together. It provides a set of registers to enable software to set, clear and
+  check the status of each of the bits of this register independently. The use
+  of 32 bits per interrupt line enables software to provide more information
+  about the source of the interrupt. For example, each bit of the register can
+  be associated with a type of event that can contribute to raising the
+  interrupt. Each of the 32-bits can be used as "doorbell" to alert the remote
+  processor.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,mhu
+          - arm,mhu-doorbell
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: Data transfer mode
+        items:
+          - const: arm,mhu
+          - const: arm,primecell
+
+      - description: Doorbell mode
+        items:
+          - const: arm,mhu-doorbell
+          - const: arm,primecell
+
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: low-priority non-secure
+      - description: high-priority non-secure
+      - description: Secure
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb_pclk
+
+  '#mbox-cells':
+    description: |
+      Set to 1 in data transfer mode and represents index of the channel.
+      Set to 2 in doorbell mode and represents index of the channel and doorbell
+      number.
+    enum: [ 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  # Data transfer mode.
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mhuA: mailbox@2b1f0000 {
+            #mbox-cells = <1>;
+            compatible = "arm,mhu", "arm,primecell";
+            reg = <0 0x2b1f0000 0 0x1000>;
+            interrupts = <0 36 4>, /* LP-NonSecure */
+                         <0 35 4>, /* HP-NonSecure */
+                         <0 37 4>; /* Secure */
+            clocks = <&clock 0 2 1>;
+            clock-names = "apb_pclk";
+        };
+    };
+
+    firmware {
+        scpi {
+            compatible = "arm,scpi";
+            mboxes = <&mhuA 1>; /* HP-NonSecure */
+            shmem = <&cpu_scp_hpri>; /* HP-NonSecure */
+
+            scpi_devpd: power-controller {
+                compatible = "arm,scpi-power-domains";
+                num-domains = <2>;
+                #power-domain-cells = <1>;
+            };
+        };
+    };
+
+  # Doorbell mode.
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mhuB: mailbox@2b2f0000 {
+            #mbox-cells = <2>;
+            compatible = "arm,mhu-doorbell", "arm,primecell";
+            reg = <0 0x2b2f0000 0 0x1000>;
+            interrupts = <0 36 4>, /* LP-NonSecure */
+                         <0 35 4>, /* HP-NonSecure */
+                         <0 37 4>; /* Secure */
+            clocks = <&clock 0 2 1>;
+            clock-names = "apb_pclk";
+        };
+    };
+
+    firmware {
+        scmi {
+            compatible = "arm,scmi";
+            mboxes = <&mhuB 0 0>, /* LP-NonSecure, 1st doorbell */
+                     <&mhuB 0 1>; /* LP-NonSecure, 2nd doorbell */
+            mbox-names = "tx", "rx";
+            shmem = <&cpu_scp_lpri0>,
+                    <&cpu_scp_lpri1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            scmi_devpd: protocol@11 {
+                reg = <0x11>;
+                #power-domain-cells = <1>;
+            };
+
+            scmi_dvfs: protocol@13 {
+                reg = <0x13>;
+                #clock-cells = <1>;
+
+                mboxes = <&mhuB 1 2>, /* HP-NonSecure, 3rd doorbell */
+                         <&mhuB 1 3>; /* HP-NonSecure, 4th doorbell */
+                mbox-names = "tx", "rx";
+                shmem = <&cpu_scp_hpri0>,
+                        <&cpu_scp_hpri1>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
new file mode 100644
index 000000000000..a4f1fe63659a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/arm,mhuv2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM MHUv2 Mailbox Controller
+
+maintainers:
+  - Tushar Khandelwal <tushar.khandelwal@arm.com>
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description: |
+  The Arm Message Handling Unit (MHU) Version 2 is a mailbox controller that has
+  between 1 and 124 channel windows (each 32-bit wide) to provide unidirectional
+  communication with remote processor(s), where the number of channel windows
+  are implementation dependent.
+
+  Given the unidirectional nature of the controller, an MHUv2 mailbox may only
+  be written to or read from. If a pair of MHU controllers is implemented
+  between two processing elements to provide bidirectional communication, these
+  must be specified as two separate mailboxes.
+
+  If the interrupts property is present in device tree node, then its treated as
+  a "receiver" mailbox, otherwise a "sender".
+
+  An MHU controller must be specified along with the supported transport
+  protocols. The transport protocols determine the method of data transmission
+  as well as the number of provided mailbox channels.
+
+  Following are the possible transport protocols.
+
+  - Data-transfer: Each transfer is made of one or more words, using one or more
+    channel windows.
+
+  - Doorbell: Each transfer is made up of single bit flag, using any one of the
+    bits in a channel window. A channel window can support up to 32 doorbells
+    and the entire window shall be used in doorbell protocol.  Optionally, data
+    may be transmitted through a shared memory region, wherein the MHU is used
+    strictly as an interrupt generation mechanism but that is out of the scope
+    of these bindings.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,mhuv2-tx
+          - arm,mhuv2-rx
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: Sender mode
+        items:
+          - const: arm,mhuv2-tx
+          - const: arm,primecell
+
+      - description: Receiver-mode
+        items:
+          - const: arm,mhuv2-rx
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      The MHUv2 controller always implements an interrupt in the "receiver"
+      mode, while the interrupt in the "sender" mode was not available in the
+      version MHUv2.0, but the later versions do have it.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  arm,mhuv2-protocols:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      The MHUv2 controller may contain up to 124 channel windows (each 32-bit
+      wide). The hardware and the DT bindings allows any combination of those to
+      be used for various transport protocols.
+
+      This property allows a platform to describe how these channel windows are
+      used in various transport protocols. The entries in this property shall be
+      present as an array of tuples, where each tuple describes details about
+      one of the transport protocol being implemented over some channel
+      window(s).
+
+      The first field of a tuple signifies the transfer protocol, 0 is reserved
+      for doorbell protocol, and 1 is reserved for data-transfer protocol.
+      Using any other value in the first field of a tuple makes it invalid.
+
+      The second field of a tuple signifies the number of channel windows where
+      the protocol would be used and should be set to a non zero value. For
+      doorbell protocol this field signifies the number of 32-bit channel
+      windows that implement the doorbell protocol. For data-transfer protocol,
+      this field signifies the number of 32-bit channel windows that implement
+      the data-transfer protocol.
+
+      The total number of channel windows specified here shouldn't be more than
+      the ones implemented by the platform, though one can specify lesser number
+      of windows here than what the platform implements.
+
+      mhu: mailbox@2b1f0000 {
+          ...
+
+          arm,mhuv2-protocols = <0 2>, <1 1>, <1 5>, <1 7>;
+      }
+
+      The above example defines the protocols of an ARM MHUv2 mailbox
+      controller, where a total of 15 channel windows are used. The first two
+      windows are used in doorbell protocol (64 doorbells), followed by 1, 5 and
+      7 windows (separately) used in data-transfer protocol.
+
+    minItems: 1
+    maxItems: 124
+    items:
+      items:
+        - enum: [ 0, 1 ]
+        - minimum: 0
+          maximum: 124
+
+
+  '#mbox-cells':
+    description: |
+      It is always set to 2. The first argument in the consumers 'mboxes'
+      property represents the channel window group, which may be used in
+      doorbell, or data-transfer protocol, and the second argument (only
+      relevant in doorbell protocol, should be 0 otherwise) represents the
+      doorbell number within the 32 bit wide channel window.
+
+      From the example given above for arm,mhuv2-protocols, here is how a client
+      node can reference them.
+
+      mboxes = <&mhu 0 5>; // Channel Window Group 0, doorbell 5.
+      mboxes = <&mhu 1 7>; // Channel Window Group 1, doorbell 7.
+      mboxes = <&mhu 2 0>; // Channel Window Group 2, data transfer protocol with 1 window.
+      mboxes = <&mhu 3 0>; // Channel Window Group 3, data transfer protocol with 5 windows.
+      mboxes = <&mhu 4 0>; // Channel Window Group 4, data transfer protocol with 7 windows.
+
+    const: 2
+
+if:
+  # Interrupt is compulsory for receiver
+  properties:
+    compatible:
+      contains:
+        const: arm,mhuv2-rx
+then:
+  required:
+    - interrupts
+
+required:
+  - compatible
+  - reg
+  - '#mbox-cells'
+  - arm,mhuv2-protocols
+
+additionalProperties: false
+
+examples:
+  # Multiple transport protocols implemented by the mailbox controllers
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mhu_tx: mailbox@2b1f0000 {
+            #mbox-cells = <2>;
+            compatible = "arm,mhuv2-tx", "arm,primecell";
+            reg = <0 0x2b1f0000 0 0x1000>;
+            clocks = <&clock 0>;
+            clock-names = "apb_pclk";
+            interrupts = <0 45 4>;
+            arm,mhuv2-protocols = <1 5>, <1 2>, <1 5>, <1 7>, <0 2>;
+        };
+
+        mhu_rx: mailbox@2b1f1000 {
+            #mbox-cells = <2>;
+            compatible = "arm,mhuv2-rx", "arm,primecell";
+            reg = <0 0x2b1f1000 0 0x1000>;
+            clocks = <&clock 0>;
+            clock-names = "apb_pclk";
+            interrupts = <0 46 4>;
+            arm,mhuv2-protocols = <1 1>, <1 7>, <0 2>;
+        };
+
+        mhu_client: dsp@596e8000 {
+            compatible = "fsl,imx8qxp-dsp";
+            reg = <0 0x596e8000 0 0x88000>;
+            clocks = <&adma_lpcg 0>, <&adma_lpcg 1>, <&adma_lpcg 2>;
+            clock-names = "ipg", "ocram", "core";
+            power-domains = <&pd 0>, <&pd 1>, <&pd 2>, <&pd 3>;
+            mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
+            mboxes = <&mhu_tx 2 0>, //data-transfer protocol with 5 windows, mhu-tx
+                     <&mhu_tx 3 0>, //data-transfer protocol with 7 windows, mhu-tx
+                     <&mhu_rx 2 27>, //doorbell protocol channel 2, doorbell 27, mhu-rx
+                     <&mhu_rx 0 0>;  //data-transfer protocol with 1 window, mhu-rx
+            memory-region = <&dsp_reserved>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/arm-mhu.txt b/Documentation/devicetree/bindings/mailbox/arm-mhu.txt
deleted file mode 100644
index 4971f03f0b33..000000000000
--- a/Documentation/devicetree/bindings/mailbox/arm-mhu.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-ARM MHU Mailbox Driver
-======================
-
-The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has
-3 independent channels/links to communicate with remote processor(s).
- MHU links are hardwired on a platform. A link raises interrupt for any
-received data. However, there is no specified way of knowing if the sent
-data has been read by the remote. This driver assumes the sender polls
-STAT register and the remote clears it after having read the data.
-The last channel is specified to be a 'Secure' resource, hence can't be
-used by Linux running NS.
-
-Mailbox Device Node:
-====================
-
-Required properties:
---------------------
-- compatible:		Shall be "arm,mhu" & "arm,primecell"
-- reg:			Contains the mailbox register address range (base
-			address and length)
-- #mbox-cells		Shall be 1 - the index of the channel needed.
-- interrupts:		Contains the interrupt information corresponding to
-			each of the 3 links of MHU.
-
-Example:
---------
-
-	mhu: mailbox@2b1f0000 {
-		#mbox-cells = <1>;
-		compatible = "arm,mhu", "arm,primecell";
-		reg = <0 0x2b1f0000 0x1000>;
-		interrupts = <0 36 4>, /* LP-NonSecure */
-			     <0 35 4>, /* HP-NonSecure */
-			     <0 37 4>; /* Secure */
-		clocks = <&clock 0 2 1>;
-		clock-names = "apb_pclk";
-	};
-
-	mhu_client: scb@2e000000 {
-		compatible = "fujitsu,mb86s70-scb-1.0";
-		reg = <0 0x2e000000 0x4000>;
-		mboxes = <&mhu 1>; /* HP-NonSecure */
-	};
diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
deleted file mode 100644
index 9c43357c5924..000000000000
--- a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-NXP i.MX Messaging Unit (MU)
---------------------------------------------------------------------
-
-The Messaging Unit module enables two processors within the SoC to
-communicate and coordinate by passing messages (e.g. data, status
-and control) through the MU interface. The MU also provides the ability
-for one processor to signal the other processor using interrupts.
-
-Because the MU manages the messaging between processors, the MU uses
-different clocks (from each side of the different peripheral buses).
-Therefore, the MU must synchronize the accesses from one side to the
-other. The MU accomplishes synchronization using two sets of matching
-registers (Processor A-facing, Processor B-facing).
-
-Messaging Unit Device Node:
-=============================
-
-Required properties:
--------------------
-- compatible :	should be "fsl,<chip>-mu", the supported chips include
-		imx6sx, imx7s, imx8qxp, imx8qm.
-		The "fsl,imx6sx-mu" compatible is seen as generic and should
-		be included together with SoC specific compatible.
-		There is a version 1.0 MU on imx7ulp, use "fsl,imx7ulp-mu"
-		compatible to support it.
-- reg :		Should contain the registers location and length
-- interrupts :	Interrupt number. The interrupt specifier format depends
-		on the interrupt controller parent.
-- #mbox-cells:  Must be 2.
-			  <&phandle type channel>
-			    phandle   : Label name of controller
-			    type      : Channel type
-			    channel   : Channel number
-
-		This MU support 4 type of unidirectional channels, each type
-		has 4 channels. A total of 16 channels. Following types are
-		supported:
-		0 - TX channel with 32bit transmit register and IRQ transmit
-		acknowledgment support.
-		1 - RX channel with 32bit receive register and IRQ support
-		2 - TX doorbell channel. Without own register and no ACK support.
-		3 - RX doorbell channel.
-
-Optional properties:
--------------------
-- clocks :	phandle to the input clock.
-- fsl,mu-side-b : Should be set for side B MU.
-
-Examples:
---------
-lsio_mu0: mailbox@5d1b0000 {
-	compatible = "fsl,imx8qxp-mu";
-	reg = <0x0 0x5d1b0000 0x0 0x10000>;
-	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-	#mbox-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
new file mode 100644
index 000000000000..191c1ce15009
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/fsl,mu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX Messaging Unit (MU)
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: |
+  The Messaging Unit module enables two processors within the SoC to
+  communicate and coordinate by passing messages (e.g. data, status
+  and control) through the MU interface. The MU also provides the ability
+  for one processor to signal the other processor using interrupts.
+
+  Because the MU manages the messaging between processors, the MU uses
+  different clocks (from each side of the different peripheral buses).
+  Therefore, the MU must synchronize the accesses from one side to the
+  other. The MU accomplishes synchronization using two sets of matching
+  registers (Processor A-facing, Processor B-facing).
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx6sx-mu
+      - const: fsl,imx7ulp-mu
+      - const: fsl,imx8ulp-mu
+      - const: fsl,imx8-mu-scu
+      - const: fsl,imx8-mu-seco
+      - const: fsl,imx93-mu-s4
+      - const: fsl,imx8ulp-mu-s4
+      - items:
+          - const: fsl,imx93-mu
+          - const: fsl,imx8ulp-mu
+      - items:
+          - enum:
+              - fsl,imx7s-mu
+              - fsl,imx8mq-mu
+              - fsl,imx8mm-mu
+              - fsl,imx8mn-mu
+              - fsl,imx8mp-mu
+              - fsl,imx8qm-mu
+              - fsl,imx8qxp-mu
+          - const: fsl,imx6sx-mu
+      - description: To communicate with i.MX8 SCU with fast IPC
+        items:
+          - const: fsl,imx8-mu-scu
+          - enum:
+              - fsl,imx8qm-mu
+              - fsl,imx8qxp-mu
+          - const: fsl,imx6sx-mu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: tx
+      - const: rx
+
+  "#mbox-cells":
+    description: |
+      <&phandle type channel>
+      phandle   : Label name of controller
+      type      : Channel type
+      channel   : Channel number
+
+      This MU support 5 type of unidirectional channels, each type
+      has 4 channels except RST channel which only has 1 channel.
+      A total of 17 channels.  Following types are
+      supported:
+      0 - TX channel with 32bit transmit register and IRQ transmit
+          acknowledgment support.
+      1 - RX channel with 32bit receive register and IRQ support
+      2 - TX doorbell channel. Without own register and no ACK support.
+      3 - RX doorbell channel.
+      4 - RST channel
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  fsl,mu-side-b:
+    description: boolean, if present, means it is for side B MU.
+    type: boolean
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx93-mu-s4
+    then:
+      properties:
+        interrupt-names:
+          minItems: 2
+        interrupts:
+          minItems: 2
+
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+      not:
+        required:
+          - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mailbox@5d1b0000 {
+        compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+        reg = <0x5d1b0000 0x10000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
new file mode 100644
index 000000000000..c579ac074ca7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mediatek,gce-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Global Command Engine Mailbox
+
+maintainers:
+  - Houlong Wei <houlong.wei@mediatek.com>
+
+description:
+  The Global Command Engine (GCE) is used to help read/write registers with
+  critical time limitation, such as updating display configuration during the
+  vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6779-gce
+      - mediatek,mt8173-gce
+      - mediatek,mt8183-gce
+      - mediatek,mt8186-gce
+      - mediatek,mt8192-gce
+      - mediatek,mt8195-gce
+
+  "#mbox-cells":
+    const: 2
+    description:
+      The first cell describes the Thread ID of the GCE,
+      the second cell describes the priority of the GCE thread
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Global Command Engine clock
+
+  clock-names:
+    items:
+      - const: gce
+
+required:
+  - compatible
+  - "#mbox-cells"
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: mediatek,mt8195-gce
+    then:
+      required:
+        - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gce: mailbox@10212000 {
+            compatible = "mediatek,mt8173-gce";
+            reg = <0 0x10212000 0 0x1000>;
+            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+            #mbox-cells = <2>;
+            clocks = <&infracfg CLK_INFRA_GCE>;
+            clock-names = "gce";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
new file mode 100644
index 000000000000..935937c67133
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mailbox/microchip,mpfs-mailbox.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    const: microchip,mpfs-mailbox
+
+  reg:
+    oneOf:
+      - items:
+          - description: mailbox control & data registers
+          - description: mailbox interrupt registers
+        deprecated: true
+      - items:
+          - description: mailbox control registers
+          - description: mailbox interrupt registers
+          - description: mailbox data registers
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      mbox: mailbox@37020000 {
+        compatible = "microchip,mpfs-mailbox";
+        reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>,
+              <0x0 0x37020800 0x0 0x100>;
+        interrupt-parent = <&L1>;
+        interrupts = <96>;
+        #mbox-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
new file mode 100644
index 000000000000..72c1d9e82c89
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mtk,adsp-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek ADSP mailbox
+
+maintainers:
+  - Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
+
+description: |
+  The MTK ADSP mailbox Inter-Processor Communication (IPC) enables the SoC
+  to communicate with ADSP by passing messages through two mailbox channels.
+  The MTK ADSP mailbox IPC also provides the ability for one processor to
+  signal the other processor using interrupts.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-adsp-mbox
+      - mediatek,mt8186-adsp-mbox
+
+  "#mbox-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#mbox-cells"
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    adsp_mailbox0:mailbox@10816000 {
+        compatible = "mediatek,mt8195-adsp-mbox";
+        #mbox-cells = <0>;
+        reg = <0x10816000 0x1000>;
+        interrupts = <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH 0>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
deleted file mode 100644
index 7b13787ab13d..000000000000
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-MediaTek GCE
-===============
-
-The Global Command Engine (GCE) is used to help read/write registers with
-critical time limitation, such as updating display configuration during the
-vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
-
-CMDQ driver uses mailbox framework for communication. Please refer to
-mailbox.txt for generic information about mailbox device-tree bindings.
-
-Required properties:
-- compatible: can be "mediatek,mt8173-gce" or "mediatek,mt8183-gce"
-- reg: Address range of the GCE unit
-- interrupts: The interrupt signal from the GCE block
-- clock: Clocks according to the common clock binding
-- clock-names: Must be "gce" to stand for GCE clock
-- #mbox-cells: Should be 3.
-	<&phandle channel priority atomic_exec>
-	phandle: Label name of a gce node.
-	channel: Channel of mailbox. Be equal to the thread id of GCE.
-	priority: Priority of GCE thread.
-	atomic_exec: GCE processing continuous packets of commands in atomic
-		way.
-
-Required properties for a client device:
-- mboxes: Client use mailbox to communicate with GCE, it should have this
-  property and list of phandle, mailbox specifiers.
-Optional properties for a client device:
-- mediatek,gce-client-reg: Specify the sub-system id which is corresponding
-  to the register address, it should have this property and list of phandle,
-  sub-system specifiers.
-  <&phandle subsys_number start_offset size>
-  phandle: Label name of a gce node.
-  subsys_number: specify the sub-system id which is corresponding
-                 to the register address.
-  start_offset: the start offset of register address that GCE can access.
-  size: the total size of register address that GCE can access.
-
-Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
-or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
-
-Example:
-
-	gce: gce@10212000 {
-		compatible = "mediatek,mt8173-gce";
-		reg = <0 0x10212000 0 0x1000>;
-		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_GCE>;
-		clock-names = "gce";
-		#mbox-cells = <3>;
-	};
-
-Example for a client device:
-
-	mmsys: clock-controller@14000000 {
-		compatible = "mediatek,mt8173-mmsys";
-		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
-			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
-		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
-				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-		mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>,
-					  <&gce SUBSYS_1401XXXX 0x2000 0x100>;
-		...
-	};
diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
deleted file mode 100644
index ff3eafc5a882..000000000000
--- a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-NVIDIA Tegra Hardware Synchronization Primitives (HSP)
-
-The HSP modules are used for the processors to share resources and communicate
-together. It provides a set of hardware synchronization primitives for
-interprocessor communication. So the interprocessor communication (IPC)
-protocols can use hardware synchronization primitives, when operating between
-two processors not in an SMP relationship.
-
-The features that HSP supported are shared mailboxes, shared semaphores,
-arbitrated semaphores and doorbells.
-
-Required properties:
-- name : Should be hsp
-- compatible
-    Array of strings.
-    one of:
-    - "nvidia,tegra186-hsp"
-    - "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"
-- reg : Offset and length of the register set for the device.
-- interrupt-names
-    Array of strings.
-    Contains a list of names for the interrupts described by the interrupt
-    property. May contain the following entries, in any order:
-    - "doorbell"
-    - "sharedN", where 'N' is a number from zero up to the number of
-      external interrupts supported by the HSP instance minus one.
-    Users of this binding MUST look up entries in the interrupt property
-    by name, using this interrupt-names property to do so.
-- interrupts
-    Array of interrupt specifiers.
-    Must contain one entry per entry in the interrupt-names property,
-    in a matching order.
-- #mbox-cells : Should be 2.
-
-The mbox specifier of the "mboxes" property in the client node should contain
-two cells. The first cell determines the HSP type and the second cell is used
-to identify the mailbox that the client is going to use.
-
-For doorbells, the second cell specifies the index of the doorbell to use.
-
-For shared mailboxes, the second cell is composed of two fields:
-- bits 31..24:
-    A bit mask of flags that further specify how the shared mailbox will be
-    used. Valid flags are:
-    - bit 31:
-        Defines the direction of the mailbox. If set, the mailbox will be used
-        as a producer (i.e. used to send data). If cleared, the mailbox is the
-        consumer of data sent by a producer.
-
-- bits 23.. 0:
-    The index of the shared mailbox to use. The number of available mailboxes
-    may vary by instance of the HSP block and SoC generation.
-
-The following file contains definitions that can be used to construct mailbox
-specifiers:
-
-    <dt-bindings/mailbox/tegra186-hsp.h>
-
-Example:
-
-hsp_top0: hsp@3c00000 {
-	compatible = "nvidia,tegra186-hsp";
-	reg = <0x0 0x03c00000 0x0 0xa0000>;
-	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "doorbell";
-	#mbox-cells = <2>;
-};
-
-client {
-	...
-	mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_XXX>;
-};
diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
new file mode 100644
index 000000000000..a3e87516d637
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/nvidia,tegra186-hsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Hardware Synchronization Primitives (HSP)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The HSP modules are used for the processors to share resources and
+  communicate together. It provides a set of hardware synchronization
+  primitives for interprocessor communication. So the interprocessor
+  communication (IPC) protocols can use hardware synchronization
+  primitives, when operating between two processors not in an SMP
+  relationship.
+
+  The features that HSP supported are shared mailboxes, shared
+  semaphores, arbitrated semaphores and doorbells.
+
+  The mbox specifier of the "mboxes" property in the client node should
+  contain two cells. The first cell determines the HSP type and the
+  second cell is used to identify the mailbox that the client is going
+  to use.
+
+  For shared mailboxes, the first cell composed of two fields:
+    - bits 15..8:
+        A bit mask of flags that further specifies the type of shared
+        mailbox to be used (based on the data size). If no flag is
+        specified then, 32-bit shared mailbox is used.
+    - bits 7..0:
+        Defines the type of the mailbox to be used. This field should be
+        TEGRA_HSP_MBOX_TYPE_SM for shared mailboxes.
+
+  For doorbells, the second cell specifies the index of the doorbell to
+  use.
+
+  For shared mailboxes, the second cell is composed of two fields:
+    - bits 31..24:
+        A bit mask of flags that further specify how the shared mailbox
+        will be used. Valid flags are:
+          - bit 31:
+              Defines the direction of the mailbox. If set, the mailbox
+              will be used as a producer (i.e. used to send data). If
+              cleared, the mailbox is the consumer of data sent by a
+              producer.
+
+    - bits 23..0:
+        The index of the shared mailbox to use. The number of available
+        mailboxes may vary by instance of the HSP block and SoC
+        generation.
+
+    The following file contains definitions that can be used to
+    construct mailbox specifiers:
+
+        <dt-bindings/mailbox/tegra186-hsp.h>
+
+properties:
+  $nodename:
+    pattern: "^hsp@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-hsp
+      - const: nvidia,tegra194-hsp
+      - items:
+          - const: nvidia,tegra234-hsp
+          - const: nvidia,tegra194-hsp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 9
+
+  interrupt-names:
+    oneOf:
+      # shared interrupts are optional
+      - items:
+          - const: doorbell
+
+      - items:
+          - const: doorbell
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+
+      - items:
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+
+  "#mbox-cells":
+    const: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+
+    hsp_top0: hsp@3c00000 {
+        compatible = "nvidia,tegra186-hsp";
+        reg = <0x03c00000 0xa0000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "doorbell";
+        #mbox-cells = <2>;
+    };
+
+    client {
+        mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_CCPLEX>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
deleted file mode 100644
index 35c3f56b7f7b..000000000000
--- a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
+++ /dev/null
@@ -1,180 +0,0 @@
-OMAP2+ and K3 Mailbox
-=====================
-
-The OMAP mailbox hardware facilitates communication between different processors
-using a queued mailbox interrupt mechanism. The IP block is external to the
-various processor subsystems and is connected on an interconnect bus. The
-communication is achieved through a set of registers for message storage and
-interrupt configuration registers.
-
-Each mailbox IP block/cluster has a certain number of h/w fifo queues and output
-interrupt lines. An output interrupt line is routed to an interrupt controller
-within a processor subsystem, and there can be more than one line going to a
-specific processor's interrupt controller. The interrupt line connections are
-fixed for an instance and are dictated by the IP integration into the SoC
-(excluding the SoCs that have a Interrupt Crossbar IP). Each interrupt line is
-programmable through a set of interrupt configuration registers, and have a rx
-and tx interrupt source per h/w fifo. Communication between different processors
-is achieved through the appropriate programming of the rx and tx interrupt
-sources on the appropriate interrupt lines.
-
-The number of h/w fifo queues and interrupt lines dictate the usable registers.
-All the current OMAP SoCs except for the newest DRA7xx SoC has a single IP
-instance. DRA7xx has multiple instances with different number of h/w fifo queues
-and interrupt lines between different instances. The interrupt lines can also be
-routed to different processor sub-systems on DRA7xx as they are routed through
-the Crossbar, a kind of interrupt router/multiplexer. The K3 AM65x and J721E
-SoCs has each of these instances form a cluster and combine multiple clusters
-into a single IP block present within the Main NavSS. The interrupt lines from
-all these clusters are multiplexed and routed to different processor subsystems
-over a limited number of common interrupt output lines of an Interrupt Router.
-
-Mailbox Device Node:
-====================
-A Mailbox device node is used to represent a Mailbox IP instance/cluster within
-a SoC. The sub-mailboxes are represented as child nodes of this parent node.
-
-Required properties:
---------------------
-- compatible:		Should be one of the following,
-			    "ti,omap2-mailbox" for OMAP2420, OMAP2430 SoCs
-			    "ti,omap3-mailbox" for OMAP3430, OMAP3630 SoCs
-			    "ti,omap4-mailbox" for OMAP44xx, OMAP54xx, AM33xx,
-						   AM43xx and DRA7xx SoCs
-			    "ti,am654-mailbox" for K3 AM65x and J721E SoCs
-- reg:			Contains the mailbox register address range (base
-			address and length)
-- interrupts:		Contains the interrupt information for the mailbox
-			device. The format is dependent on which interrupt
-			controller the Mailbox device uses
-- #mbox-cells:		Common mailbox binding property to identify the number
-			of cells required for the mailbox specifier. Should be
-			1
-- ti,mbox-num-users:	Number of targets (processor devices) that the mailbox
-			device can interrupt
-- ti,mbox-num-fifos:	Number of h/w fifo queues within the mailbox IP block
-
-SoC-specific Required properties:
----------------------------------
-The following are mandatory properties for the OMAP architecture based SoCs
-only:
-- ti,hwmods:		Name of the hwmod associated with the mailbox. This
-			should be defined in the mailbox node only if the node
-			is not defined as a child node of a corresponding sysc
-			interconnect node.
-
-The following are mandatory properties for the K3 AM65x and J721E SoCs only:
-- interrupt-parent:	Should contain a phandle to the TI-SCI interrupt
-			controller node that is used to dynamically program
-			the interrupt routes between the IP and the main GIC
-			controllers. See the following binding for additional
-			details,
-			Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
-
-Child Nodes:
-============
-A child node is used for representing the actual sub-mailbox device that is
-used for the communication between the host processor and a remote processor.
-Each child node should have a unique node name across all the different
-mailbox device nodes.
-
-Required properties:
---------------------
-- ti,mbox-tx:		sub-mailbox descriptor property defining a Tx fifo
-- ti,mbox-rx:		sub-mailbox descriptor property defining a Rx fifo
-
-Sub-mailbox Descriptor Data
----------------------------
-Each of the above ti,mbox-tx and ti,mbox-rx properties should have 3 cells of
-data that represent the following:
-    Cell #1 (fifo_id) - mailbox fifo id used either for transmitting
-                        (ti,mbox-tx) or for receiving (ti,mbox-rx)
-    Cell #2 (irq_id)  - irq identifier index number to use from the parent's
-                        interrupts data. Should be 0 for most of the cases, a
-                        positive index value is seen only on mailboxes that have
-                        multiple interrupt lines connected to the MPU processor.
-    Cell #3 (usr_id)  - mailbox user id for identifying the interrupt line
-                        associated with generating a tx/rx fifo interrupt.
-
-Optional Properties:
---------------------
-- ti,mbox-send-noirq:   Quirk flag to allow the client user of this sub-mailbox
-                        to send messages without triggering a Tx ready interrupt,
-                        and to control the Tx ticker. Should be used only on
-                        sub-mailboxes used to communicate with WkupM3 remote
-                        processor on AM33xx/AM43xx SoCs.
-
-Mailbox Users:
-==============
-A device needing to communicate with a target processor device should specify
-them using the common mailbox binding properties, "mboxes" and the optional
-"mbox-names" (please see Documentation/devicetree/bindings/mailbox/mailbox.txt
-for details). Each value of the mboxes property should contain a phandle to the
-mailbox controller device node and an args specifier that will be the phandle to
-the intended sub-mailbox child node to be used for communication. The equivalent
-"mbox-names" property value can be used to give a name to the communication channel
-to be used by the client user.
-
-
-Example:
---------
-
-1. /* OMAP4 */
-mailbox: mailbox@4a0f4000 {
-	compatible = "ti,omap4-mailbox";
-	reg = <0x4a0f4000 0x200>;
-	interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-	ti,hwmods = "mailbox";
-	#mbox-cells = <1>;
-	ti,mbox-num-users = <3>;
-	ti,mbox-num-fifos = <8>;
-	mbox_ipu: mbox_ipu {
-		ti,mbox-tx = <0 0 0>;
-		ti,mbox-rx = <1 0 0>;
-	};
-	mbox_dsp: mbox_dsp {
-		ti,mbox-tx = <3 0 0>;
-		ti,mbox-rx = <2 0 0>;
-	};
-};
-
-dsp {
-	...
-	mboxes = <&mailbox &mbox_dsp>;
-	...
-};
-
-2. /* AM33xx */
-mailbox: mailbox@480c8000 {
-	compatible = "ti,omap4-mailbox";
-	reg = <0x480C8000 0x200>;
-	interrupts = <77>;
-	ti,hwmods = "mailbox";
-	#mbox-cells = <1>;
-	ti,mbox-num-users = <4>;
-	ti,mbox-num-fifos = <8>;
-	mbox_wkupm3: wkup_m3 {
-		ti,mbox-tx = <0 0 0>;
-		ti,mbox-rx = <0 0 3>;
-	};
-};
-
-3. /* AM65x */
-&cbass_main {
-	cbass_main_navss: interconnect0 {
-		mailbox0_cluster0: mailbox@31f80000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f80000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&intr_main_navss>;
-			interrupts = <164 0>;
-
-			mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-				ti,mbox-tx = <1 0 0>;
-				ti,mbox-rx = <0 0 0>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt
deleted file mode 100644
index beec612dbe6a..000000000000
--- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-Binding for the Qualcomm APCS global block
-==========================================
-
-This binding describes the APCS "global" block found in various Qualcomm
-platforms.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,msm8916-apcs-kpss-global",
-		    "qcom,msm8996-apcs-hmss-global"
-		    "qcom,msm8998-apcs-hmss-global"
-		    "qcom,qcs404-apcs-apps-global"
-		    "qcom,sc7180-apss-shared"
-		    "qcom,sdm845-apss-shared"
-		    "qcom,sm8150-apss-shared"
-		    "qcom,ipq8074-apcs-apps-global"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: must specify the base address and size of the global block
-
-- clocks:
-	Usage: required if #clock-names property is present
-	Value type: <phandle array>
-	Definition: phandles to the two parent clocks of the clock driver.
-
-- #mbox-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: as described in mailbox.txt, must be 1
-
-- #clock-cells:
-	Usage: optional
-	Value type: <u32>
-	Definition: as described in clock.txt, must be 0
-
-- clock-names:
-	Usage: required if the platform data based clock driver needs to
-	retrieve the parent clock names from device tree.
-	This will requires two mandatory clocks to be defined.
-	Value type: <string-array>
-	Definition: must be "pll" and "aux"
-
-= EXAMPLE
-The following example describes the APCS HMSS found in MSM8996 and part of the
-GLINK RPM referencing the "rpm_hlos" doorbell therein.
-
-	apcs_glb: mailbox@9820000 {
-		compatible = "qcom,msm8996-apcs-hmss-global";
-		reg = <0x9820000 0x1000>;
-
-		#mbox-cells = <1>;
-	};
-
-	rpm-glink {
-		compatible = "qcom,glink-rpm";
-
-		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-
-		qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
-		mboxes = <&apcs_glb 0>;
-		mbox-names = "rpm_hlos";
-	};
-
-Below is another example of the APCS binding on MSM8916 platforms:
-
-	apcs: mailbox@b011000 {
-		compatible = "qcom,msm8916-apcs-kpss-global";
-		reg = <0xb011000 0x1000>;
-		#mbox-cells = <1>;
-		clocks = <&a53pll>;
-		#clock-cells = <0>;
-	};
-
-Below is another example of the APCS binding on QCS404 platforms:
-
-	apcs_glb: mailbox@b011000 {
-		compatible = "qcom,qcs404-apcs-apps-global", "syscon";
-		reg = <0x0b011000 0x1000>;
-		#mbox-cells = <1>;
-		clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
-		clock-names = "pll", "aux";
-		#clock-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
new file mode 100644
index 000000000000..f24fd84b4b05
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mailbox/qcom,apcs-kpss-global.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm APCS global block bindings
+
+description:
+  This binding describes the APCS "global" block found in various Qualcomm
+  platforms.
+
+maintainers:
+  - Jassi Brar <jassisinghbrar@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,ipq6018-apcs-apps-global
+              - qcom,ipq8074-apcs-apps-global
+              - qcom,msm8976-apcs-kpss-global
+              - qcom,msm8996-apcs-hmss-global
+              - qcom,msm8998-apcs-hmss-global
+              - qcom,qcm2290-apcs-hmss-global
+              - qcom,sc7180-apss-shared
+              - qcom,sc8180x-apss-shared
+              - qcom,sdm660-apcs-hmss-global
+              - qcom,sdm845-apss-shared
+              - qcom,sm6125-apcs-hmss-global
+              - qcom,sm6115-apcs-hmss-global
+              - qcom,sm8150-apss-shared
+      - items:
+          - enum:
+              - qcom,msm8916-apcs-kpss-global
+              - qcom,msm8939-apcs-kpss-global
+              - qcom,msm8953-apcs-kpss-global
+              - qcom,msm8994-apcs-kpss-global
+              - qcom,qcs404-apcs-apps-global
+          - const: syscon
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: phandles to the parent clocks of the clock driver
+    minItems: 2
+    maxItems: 3
+
+  '#mbox-cells':
+    const: 1
+
+  '#clock-cells':
+    enum: [0, 1]
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - '#mbox-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,msm8916-apcs-kpss-global
+            - qcom,msm8994-apcs-kpss-global
+            - qcom,msm8996-apcs-hmss-global
+            - qcom,msm8998-apcs-hmss-global
+            - qcom,qcs404-apcs-apps-global
+            - qcom,sc7180-apss-shared
+            - qcom,sdm660-apcs-hmss-global
+            - qcom,sdm845-apss-shared
+            - qcom,sm6125-apcs-hmss-global
+            - qcom,sm8150-apss-shared
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary pll parent of the clock driver
+            - description: auxiliary parent
+        clock-names:
+          items:
+            - const: pll
+            - const: aux
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sdx55-apcs-gcc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary pll parent of the clock driver
+            - description: auxiliary parent
+            - description: reference clock
+        clock-names:
+          items:
+            - const: pll
+            - const: aux
+            - const: ref
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,ipq6018-apcs-apps-global
+            - qcom,ipq8074-apcs-apps-global
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary pll parent of the clock driver
+            - description: XO clock
+        clock-names:
+          items:
+            - const: pll
+            - const: xo
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,ipq6018-apcs-apps-global
+            - qcom,ipq8074-apcs-apps-global
+    then:
+      properties:
+        '#clock-cells':
+          const: 1
+    else:
+      properties:
+        '#clock-cells':
+          const: 0
+
+examples:
+
+  # Example apcs with msm8996
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    apcs_glb: mailbox@9820000 {
+        compatible = "qcom,msm8996-apcs-hmss-global";
+        reg = <0x9820000 0x1000>;
+
+        #mbox-cells = <1>;
+    };
+
+    rpm-glink {
+        compatible = "qcom,glink-rpm";
+        interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+        qcom,rpm-msg-ram = <&rpm_msg_ram>;
+        mboxes = <&apcs_glb 0>;
+        mbox-names = "rpm_hlos";
+    };
+
+  # Example apcs with qcs404
+  - |
+    #define GCC_APSS_AHB_CLK_SRC  1
+    #define GCC_GPLL0_AO_OUT_MAIN 123
+    apcs: mailbox@b011000 {
+        compatible = "qcom,qcs404-apcs-apps-global", "syscon";
+        reg = <0x0b011000 0x1000>;
+        #mbox-cells = <1>;
+        clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
+        clock-names = "pll", "aux";
+        #clock-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
new file mode 100644
index 000000000000..baca4786ff94
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/qcom-ipcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Inter-Processor Communication Controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  The Inter-Processor Communication Controller (IPCC) is a centralized hardware
+  to route interrupts across various subsystems. It involves a three-level
+  addressing scheme called protocol, client and signal. For example, consider an
+  entity on the Application Processor Subsystem (APSS) that wants to listen to
+  Modem's interrupts via Shared Memory Point to Point (SMP2P) interface. In such
+  a case, the client would be Modem (client-id is 2) and the signal would be
+  SMP2P (signal-id is 2). The SMP2P itself falls under the Multiprocessor (MPROC)
+  protocol (protocol-id is 0). Refer include/dt-bindings/mailbox/qcom-ipcc.h
+  for the list of such IDs.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sm6350-ipcc
+          - qcom,sm6375-ipcc
+          - qcom,sm8250-ipcc
+          - qcom,sm8350-ipcc
+          - qcom,sm8450-ipcc
+          - qcom,sc7280-ipcc
+      - const: qcom,ipcc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description:
+      The first cell is the client-id, the second cell is the signal-id and the
+      third cell is the interrupt type.
+
+  "#mbox-cells":
+    const: 2
+    description:
+      The first cell is the client-id, and the second cell is the signal-id.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    mailbox@408000 {
+        compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
+        reg = <0x408000 0x1000>;
+        interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+        #mbox-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
new file mode 100644
index 000000000000..80feba82cbd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mailbox/sprd-mailbox.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Spreadtrum mailbox controller bindings
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc9860-mailbox
+      - sprd,sc9863a-mailbox
+
+  reg:
+    items:
+      - description: inbox registers' base address
+      - description: outbox registers' base address
+
+  interrupts:
+    minItems: 2
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 2
+    items:
+      - const: inbox
+      - const: outbox
+      - const: supp-outbox
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: enable
+
+  "#mbox-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - "#mbox-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mailbox: mailbox@400a0000 {
+      compatible = "sprd,sc9860-mailbox";
+      reg = <0x400a0000 0x8000>, <0x400a8000 0x8000>;
+      #mbox-cells = <1>;
+      clock-names = "enable";
+      clocks = <&aon_gate 53>;
+      interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "inbox", "outbox";
+    };
+...
diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
index 5b13d6672996..2c8b47285aa3 100644
--- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
+++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
@@ -13,8 +13,8 @@ description:
   channels (N) can be read from a dedicated register.
 
 maintainers:
-  - Fabien Dessenne <fabien.dessenne@st.com>
-  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
 
 properties:
   compatible:
@@ -24,23 +24,17 @@ properties:
     maxItems: 1
 
   clocks:
-     maxItems: 1
+    maxItems: 1
 
   interrupts:
     items:
       - description: rx channel occupied
       - description: tx channel free
-      - description: wakeup source
-    minItems: 2
-    maxItems: 3
 
   interrupt-names:
     items:
       - const: rx
       - const: tx
-      - const: wakeup
-    minItems: 2
-    maxItems: 3
 
   wakeup-source: true
 
@@ -49,9 +43,8 @@ properties:
 
   st,proc-id:
     description: Processor id using the mailbox (0 or 1)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
 required:
   - compatible
@@ -73,10 +66,9 @@ examples:
       #mbox-cells = <1>;
       reg = <0x4c001000 0x400>;
       st,proc-id = <0>;
-      interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
-      		      <&intc GIC_SPI 101 IRQ_TYPE_NONE>,
-      		      <&aiec 62 1>;
-      interrupt-names = "rx", "tx", "wakeup";
+      interrupts-extended = <&exti 61 1>,
+                            <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "rx", "tx";
       clocks = <&rcc_clk IPCC>;
       wakeup-source;
     };
diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
new file mode 100644
index 000000000000..d433e496ec6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
@@ -0,0 +1,299 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/ti,omap-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI OMAP2+ and K3 Mailbox devices
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  The OMAP Mailbox hardware facilitates communication between different
+  processors using a queued mailbox interrupt mechanism. The IP block is
+  external to the various processor subsystems and is connected on an
+  interconnect bus. The communication is achieved through a set of registers
+  for message storage and interrupt configuration registers.
+
+  Each mailbox IP block/cluster has a certain number of h/w fifo queues and
+  output interrupt lines. An output interrupt line is routed to an interrupt
+  controller within a processor subsystem, and there can be more than one line
+  going to a specific processor's interrupt controller. The interrupt line
+  connections are fixed for an instance and are dictated by the IP integration
+  into the SoC (excluding the SoCs that have an Interrupt Crossbar or an
+  Interrupt Router IP). Each interrupt line is programmable through a set of
+  interrupt configuration registers, and have a rx and tx interrupt source per
+  h/w fifo. Communication between different processors is achieved through the
+  appropriate programming of the rx and tx interrupt sources on the appropriate
+  interrupt lines.
+
+  The number of h/w fifo queues and interrupt lines dictate the usable
+  registers. All the current OMAP SoCs except for the newest DRA7xx SoC has a
+  single IP instance. DRA7xx has multiple instances with different number of
+  h/w fifo queues and interrupt lines between different instances. The interrupt
+  lines can also be routed to different processor sub-systems on DRA7xx as they
+  are routed through the Crossbar, a kind of interrupt router/multiplexer. The
+  K3 AM65x, J721E and J7200 SoCs has each of these instances form a cluster and
+  combine multiple clusters into a single IP block present within the Main
+  NavSS. The interrupt lines from all these clusters are multiplexed and routed
+  to different processor subsystems over a limited number of common interrupt
+  output lines of an Interrupt Router. The AM64x SoCS also uses a single IP
+  block comprising of multiple clusters, but the number of clusters are
+  smaller, and the interrupt output lines are connected directly to various
+  processors.
+
+  Mailbox Controller Nodes
+  =========================
+  A Mailbox device node is used to represent a Mailbox IP instance/cluster
+  within a SoC. The sub-mailboxes (actual communication channels) are
+  represented as child nodes of this parent node.
+
+  Mailbox Users
+  ==============
+  A device needing to communicate with a target processor device should specify
+  them using the common mailbox binding properties, "mboxes" and the optional
+  "mbox-names" (please see Documentation/devicetree/bindings/mailbox/mailbox.txt
+  for details). Each value of the mboxes property should contain a phandle to
+  the mailbox controller device node and an args specifier that will be the
+  phandle to the intended sub-mailbox child node to be used for communication.
+  The equivalent "mbox-names" property value can be used to give a name to the
+  communication channel to be used by the client user.
+
+$defs:
+  omap-mbox-descriptor:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      The omap-mbox-descriptor is made of up of 3 cells and represents a single
+      uni-directional communication channel. A typical sub-mailbox device uses
+      two such channels - one for transmitting (Tx) and one for receiving (Rx).
+    items:
+      - description:
+          mailbox fifo id used either for transmitting on ti,mbox-tx channel or
+          for receiving on ti,mbox-rx channel (fifo_id). This is the hardware
+          fifo number within a mailbox cluster.
+      - description:
+          irq identifier index number to use from the parent's interrupts data.
+          Should be 0 for most of the cases, a positive index value is seen only
+          on mailboxes that have multiple interrupt lines connected to the MPU
+          processor (irq_id). This is an index number in the listed interrupts
+          property in the DT nodes.
+      - description:
+          mailbox user id for identifying the interrupt line associated with
+          generating a tx/rx fifo interrupt (usr_id). This is the hardware
+          user id number within a mailbox cluster.
+
+  omap-sub-mailbox:
+    type: object
+    description:
+      The omap-sub-mailbox is a child node within a Mailbox controller device
+      node and represents the actual communication channel used to send and
+      receive messages between the host processor and a remote processor. Each
+      child node should have a unique node name across all the different mailbox
+      device nodes.
+
+    properties:
+      ti,mbox-tx:
+        $ref: "#/$defs/omap-mbox-descriptor"
+        description: sub-mailbox descriptor property defining a Tx fifo.
+
+      ti,mbox-rx:
+        $ref: "#/$defs/omap-mbox-descriptor"
+        description: sub-mailbox descriptor property defining a Rx fifo.
+
+      ti,mbox-send-noirq:
+        type: boolean
+        description:
+          Quirk flag to allow the client user of this sub-mailbox to send
+          messages without triggering a Tx ready interrupt, and to control
+          the Tx ticker. Should be used only on sub-mailboxes used to
+          communicate with WkupM3 remote processor on AM33xx/AM43xx SoCs.
+
+    required:
+      - ti,mbox-tx
+      - ti,mbox-rx
+
+properties:
+  compatible:
+    enum:
+      - ti,omap2-mailbox # for OMAP2420, OMAP2430 SoCs
+      - ti,omap3-mailbox # for OMAP3430, OMAP3630 SoCs
+      - ti,omap4-mailbox # for OMAP44xx, OMAP54xx, AM33xx, AM43xx and DRA7xx SoCs
+      - ti,am654-mailbox # for K3 AM65x, J721E and J7200 SoCs
+      - ti,am64-mailbox  # for K3 AM64x SoCs
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Contains the interrupt information for the mailbox device. The format is
+      dependent on which interrupt controller the Mailbox device uses. The
+      number of interrupts listed will at most be the value specified in
+      ti,mbox-num-users property, but is usually limited by the number of
+      interrupts reaching the main processor. An interrupt-parent property
+      is required on SoCs where the interrupt lines are connected through a
+      Interrupt Router before reaching the main processor's GIC.
+
+  "#mbox-cells":
+    const: 1
+    description:
+      The specifier is a phandle to an omap-sub-mailbox device.
+
+  ti,mbox-num-users:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of targets (processor devices) that the mailbox device can
+      interrupt.
+
+  ti,mbox-num-fifos:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of h/w fifo queues within the mailbox IP block.
+
+  ti,hwmods:
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+    description:
+      Name of the hwmod associated with the mailbox. This should be defined
+      in the mailbox node only if the node is not defined as a child node of
+      a corresponding sysc interconnect node.
+
+      This property is only needed on some legacy OMAP SoCs which have not
+      yet been converted to the ti,sysc interconnect hierarachy, but is
+      otherwise considered obsolete.
+
+patternProperties:
+  "^mbox-[a-z0-9-]+$":
+    $ref: "#/$defs/omap-sub-mailbox"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+  - ti,mbox-num-users
+  - ti,mbox-num-fifos
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am654-mailbox
+            - ti,am64-mailbox
+    then:
+      properties:
+        ti,mbox-num-users:
+          const: 4
+        ti,mbox-num-fifos:
+          const: 16
+        interrupts:
+          minItems: 1
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,omap4-mailbox
+    then:
+      properties:
+        ti,mbox-num-users:
+          enum: [3, 4]
+        ti,mbox-num-fifos:
+          enum: [8, 12]
+        interrupts:
+          minItems: 1
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,omap3-mailbox
+    then:
+      properties:
+        ti,mbox-num-users:
+          const: 2
+        ti,mbox-num-fifos:
+          const: 2
+        interrupts:
+          minItems: 1
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,omap2-mailbox
+    then:
+      properties:
+        ti,mbox-num-users:
+          const: 4
+        ti,mbox-num-fifos:
+          const: 6
+        interrupts:
+          minItems: 1
+          maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    /* OMAP4 */
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mailbox: mailbox@4a0f4000 {
+        compatible = "ti,omap4-mailbox";
+        reg = <0x4a0f4000 0x200>;
+        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <1>;
+        ti,mbox-num-users = <3>;
+        ti,mbox-num-fifos = <8>;
+
+        mbox_ipu: mbox-ipu {
+            ti,mbox-tx = <0 0 0>;
+            ti,mbox-rx = <1 0 0>;
+        };
+        mbox_dsp: mbox-dsp {
+            ti,mbox-tx = <3 0 0>;
+            ti,mbox-rx = <2 0 0>;
+        };
+    };
+
+    dsp {
+        mboxes = <&mailbox &mbox_dsp>;
+    };
+
+  - |
+    /* AM33xx */
+    mailbox1: mailbox@480c8000 {
+        compatible = "ti,omap4-mailbox";
+        reg = <0x480c8000 0x200>;
+        interrupts = <77>;
+        #mbox-cells = <1>;
+        ti,mbox-num-users = <4>;
+        ti,mbox-num-fifos = <8>;
+
+        mbox_wkupm3: mbox-wkup-m3 {
+            ti,mbox-tx = <0 0 0>;
+            ti,mbox-rx = <0 0 3>;
+            ti,mbox-send-noirq;
+        };
+    };
+
+  - |
+    /* AM65x */
+    mailbox0_cluster0: mailbox@31f80000 {
+        compatible = "ti,am654-mailbox";
+        reg = <0x31f80000 0x200>;
+        #mbox-cells = <1>;
+        ti,mbox-num-users = <4>;
+        ti,mbox-num-fifos = <16>;
+        interrupt-parent = <&intr_main_navss>;
+        interrupts = <436>;
+
+        mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+            ti,mbox-tx = <1 0 0>;
+            ti,mbox-rx = <0 0 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.txt b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.txt
deleted file mode 100644
index 6c9c7daf0f5c..000000000000
--- a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Texas Instruments' Secure Proxy
-========================================
-
-The Texas Instruments' secure proxy is a mailbox controller that has
-configurable queues selectable at SoC(System on Chip) integration. The
-Message manager is broken up into different address regions that are
-called "threads" or "proxies" - each instance is unidirectional and is
-instantiated at SoC integration level by system controller to indicate
-receive or transmit path.
-
-Message Manager Device Node:
-===========================
-Required properties:
---------------------
-- compatible:		Shall be "ti,am654-secure-proxy"
-- reg-names 		target_data - Map the proxy data region
-			rt - Map the realtime status region
-			scfg - Map the configuration region
-- reg:			Contains the register map per reg-names.
-- #mbox-cells		Shall be 1 and shall refer to the transfer path
-			called thread.
-- interrupt-names:	Contains interrupt names matching the rx transfer path
-			for a given SoC. Receive interrupts shall be of the
-			format: "rx_<PID>".
-- interrupts:		Contains the interrupt information corresponding to
-			interrupt-names property.
-
-Example(AM654):
-------------
-
-	secure_proxy: mailbox@32c00000 {
-		compatible = "ti,am654-secure-proxy";
-		#mbox-cells = <1>;
-		reg-names = "target_data", "rt", "scfg";
-		reg = <0x0 0x32c00000 0x0 0x100000>,
-		      <0x0 0x32400000 0x0 0x100000>,
-		      <0x0 0x32800000 0x0 0x100000>;
-		interrupt-names = "rx_011";
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	dmsc: dmsc {
-		[...]
-		mbox-names = "rx", "tx";
-		# RX Thread ID is 11
-		# TX Thread ID is 13
-		mboxes= <&secure_proxy 11>,
-			<&secure_proxy 13>;
-		[...]
-	};
diff --git a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml
new file mode 100644
index 000000000000..eea822861804
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/ti,secure-proxy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' Secure Proxy
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  The Texas Instruments' secure proxy is a mailbox controller that has
+  configurable queues selectable at SoC(System on Chip) integration. The
+  Message manager is broken up into different address regions that are
+  called "threads" or "proxies" - each instance is unidirectional and is
+  instantiated at SoC integration level by system controller to indicate
+  receive or transmit path.
+
+properties:
+  $nodename:
+    pattern: "^mailbox@[0-9a-f]+$"
+
+  compatible:
+    const: ti,am654-secure-proxy
+
+  "#mbox-cells":
+    const: 1
+    description:
+      Contains the secure proxy thread ID used for the specific transfer path.
+
+  reg-names:
+    items:
+      - const: target_data
+      - const: rt
+      - const: scfg
+
+  reg:
+    minItems: 3
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 100
+    items:
+      pattern: "^rx_[0-9]{3}$"
+    description:
+      Contains the interrupt name information for the Rx interrupt path for
+      secure proxy thread in the form 'rx_<PID>'.
+
+  interrupts:
+    minItems: 1
+    maxItems: 100
+    description:
+      Contains the interrupt information for the Rx interrupt path for secure
+      proxy.
+
+required:
+  - compatible
+  - reg-names
+  - reg
+  - interrupt-names
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    secure_proxy: mailbox@32c00000 {
+          compatible = "ti,am654-secure-proxy";
+          #mbox-cells = <1>;
+          reg-names = "target_data", "rt", "scfg";
+          reg = <0x32c00000 0x100000>,
+                <0x32400000 0x100000>,
+                <0x32800000 0x100000>;
+          interrupt-names = "rx_011";
+          interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
deleted file mode 100644
index 4438432bfe9b..000000000000
--- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-Xilinx IPI Mailbox Controller
-========================================
-
-The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
-messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
-agent owns registers used for notification and buffers for message.
-
-               +-------------------------------------+
-               | Xilinx ZynqMP IPI Controller        |
-               +-------------------------------------+
-    +--------------------------------------------------+
-ATF                    |                     |
-                       |                     |
-                       |                     |
-    +--------------------------+             |
-                       |                     |
-                       |                     |
-    +--------------------------------------------------+
-            +------------------------------------------+
-            |  +----------------+   +----------------+ |
-Hardware    |  |  IPI Agent     |   |  IPI Buffers   | |
-            |  |  Registers     |   |                | |
-            |  |                |   |                | |
-            |  +----------------+   +----------------+ |
-            |                                          |
-            | Xilinx IPI Agent Block                   |
-            +------------------------------------------+
-
-
-Controller Device Node:
-===========================
-Required properties:
---------------------
-IPI agent node:
-- compatible:		Shall be: "xlnx,zynqmp-ipi-mailbox"
-- interrupt-parent:	Phandle for the interrupt controller
-- interrupts:		Interrupt information corresponding to the
-			interrupt-names property.
-- xlnx,ipi-id:		local Xilinx IPI agent ID
-- #address-cells:	number of address cells of internal IPI mailbox nodes
-- #size-cells:		number of size cells of internal IPI mailbox nodes
-
-Internal IPI mailbox node:
-- reg:			IPI buffers address ranges
-- reg-names:		Names of the reg resources. It should have:
-			* local_request_region
-			  - IPI request msg buffer written by local and read
-			    by remote
-			* local_response_region
-			  - IPI response msg buffer written by local and read
-			    by remote
-			* remote_request_region
-			  - IPI request msg buffer written by remote and read
-			    by local
-			* remote_response_region
-			  - IPI response msg buffer written by remote and read
-			    by local
-- #mbox-cells:		Shall be 1. It contains:
-			* tx(0) or rx(1) channel
-- xlnx,ipi-id:		remote Xilinx IPI agent ID of which the mailbox is
-			connected to.
-
-Optional properties:
---------------------
-- method:              The method of accessing the IPI agent registers.
-                       Permitted values are: "smc" and "hvc". Default is
-                       "smc".
-
-Client Device Node:
-===========================
-Required properties:
---------------------
-- mboxes:		Standard property to specify a mailbox
-			(See ./mailbox.txt)
-- mbox-names:		List of identifier  strings for each mailbox
-			channel.
-
-Example:
-===========================
-	zynqmp_ipi {
-		compatible = "xlnx,zynqmp-ipi-mailbox";
-		interrupt-parent = <&gic>;
-		interrupts = <0 29 4>;
-		xlnx,ipi-id = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* APU<->RPU0 IPI mailbox controller */
-		ipi_mailbox_rpu0: mailbox@ff90400 {
-			reg = <0xff990400 0x20>,
-			      <0xff990420 0x20>,
-			      <0xff990080 0x20>,
-			      <0xff9900a0 0x20>;
-			reg-names = "local_request_region",
-				    "local_response_region",
-				    "remote_request_region",
-				    "remote_response_region";
-			#mbox-cells = <1>;
-			xlnx,ipi-id = <1>;
-		};
-		/* APU<->RPU1 IPI mailbox controller */
-		ipi_mailbox_rpu1: mailbox@ff990440 {
-			reg = <0xff990440 0x20>,
-			      <0xff990460 0x20>,
-			      <0xff990280 0x20>,
-			      <0xff9902a0 0x20>;
-			reg-names = "local_request_region",
-				    "local_response_region",
-				    "remote_request_region",
-				    "remote_response_region";
-			#mbox-cells = <1>;
-			xlnx,ipi-id = <2>;
-		};
-	};
-	rpu0 {
-		...
-		mboxes = <&ipi_mailbox_rpu0 0>,
-			 <&ipi_mailbox_rpu0 1>;
-		mbox-names = "tx", "rx";
-	};
-	rpu1 {
-		...
-		mboxes = <&ipi_mailbox_rpu1 0>,
-			 <&ipi_mailbox_rpu1 1>;
-		mbox-names = "tx", "rx";
-	};
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
new file mode 100644
index 000000000000..2193141dd7fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mailbox/xlnx,zynqmp-ipi-mailbox.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xilinx IPI(Inter Processor Interrupt) mailbox controller
+
+description: |
+  The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
+  messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
+  agent owns registers used for notification and buffers for message.
+
+               +-------------------------------------+
+               | Xilinx ZynqMP IPI Controller        |
+               +-------------------------------------+
+    +--------------------------------------------------+
+  TF-A                   |                     |
+                         |                     |
+                         |                     |
+    +--------------------------+               |
+                         |                     |
+                         |                     |
+    +--------------------------------------------------+
+              +------------------------------------------+
+              |  +----------------+   +----------------+ |
+  Hardware    |  |  IPI Agent     |   |  IPI Buffers   | |
+              |  |  Registers     |   |                | |
+              |  |                |   |                | |
+              |  +----------------+   +----------------+ |
+              |                                          |
+              | Xilinx IPI Agent Block                   |
+              +------------------------------------------+
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-ipi-mailbox
+
+  method:
+    description: |
+      The method of calling the PM-API firmware layer.
+      Permitted values are.
+      - "smc" : SMC #0, following the SMCCC
+      - "hvc" : HVC #0, following the SMCCC
+
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - smc
+      - hvc
+    default: smc
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+  xlnx,ipi-id:
+    description: |
+      Remote Xilinx IPI agent ID of which the mailbox is connected to.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  interrupts:
+    maxItems: 1
+
+  ranges: true
+
+patternProperties:
+  '^mailbox@[0-9a-f]+$':
+    description: Internal ipi mailbox node
+    type: object  # DT nodes are json objects
+    properties:
+      xlnx,ipi-id:
+        description:
+          Remote Xilinx IPI agent ID of which the mailbox is connected to.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      '#mbox-cells':
+        const: 1
+        description:
+          It contains tx(0) or rx(1) channel IPI id number.
+
+      reg:
+        maxItems: 4
+
+      reg-names:
+        items:
+          - const: local_request_region
+          - const: local_response_region
+          - const: remote_request_region
+          - const: remote_response_region
+
+    required:
+      - reg
+      - reg-names
+      - "#mbox-cells"
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
+  - '#address-cells'
+  - '#size-cells'
+  - xlnx,ipi-id
+
+examples:
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    amba {
+      #address-cells = <0x2>;
+      #size-cells = <0x2>;
+      zynqmp-mailbox {
+        compatible = "xlnx,zynqmp-ipi-mailbox";
+        interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+        xlnx,ipi-id = <0>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges;
+
+        mailbox: mailbox@ff9905c0 {
+          reg = <0x0 0xff9905c0 0x0 0x20>,
+                <0x0 0xff9905e0 0x0 0x20>,
+                <0x0 0xff990e80 0x0 0x20>,
+                <0x0 0xff990ea0 0x0 0x20>;
+          reg-names = "local_request_region",
+                      "local_response_region",
+                      "remote_request_region",
+                      "remote_response_region";
+          #mbox-cells = <1>;
+          xlnx,ipi-id = <4>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allegro,al5e.yaml b/Documentation/devicetree/bindings/media/allegro,al5e.yaml
new file mode 100644
index 000000000000..2899d26d690e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allegro,al5e.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allegro,al5e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allegro DVT Video IP Codecs
+
+maintainers:
+  - Michael Tretter <m.tretter@pengutronix.de>
+
+description: |-
+  Allegro DVT video IP codecs present in the Xilinx ZynqMP SoC. The IP core may
+  either be a H.264/H.265 encoder or H.264/H.265 decoder ip core.
+
+  Each actual codec engine is controlled by a microcontroller (MCU). Host
+  software uses a provided mailbox interface to communicate with the MCU. The
+  MCUs share an interrupt.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: allegro,al5e-1.1
+          - const: allegro,al5e
+      - items:
+          - const: allegro,al5d-1.1
+          - const: allegro,al5d
+
+  reg:
+    items:
+      - description: The registers
+      - description: The SRAM
+
+  reg-names:
+    items:
+      - const: regs
+      - const: sram
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Core clock
+      - description: MCU clock
+      - description: Core AXI master port clock
+      - description: MCU AXI master port clock
+      - description: AXI4-Lite slave port clock
+
+  clock-names:
+    items:
+      - const: core_clk
+      - const: mcu_clk
+      - const: m_axi_core_aclk
+      - const: m_axi_mcu_aclk
+      - const: s_axi_lite_aclk
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: False
+
+examples:
+  - |
+    fpga {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        al5e: video-codec@a0009000 {
+            compatible = "allegro,al5e-1.1", "allegro,al5e";
+            reg = <0 0xa0009000 0 0x1000>,
+            <0 0xa0000000 0 0x8000>;
+            reg-names = "regs", "sram";
+            interrupts = <0 96 4>;
+            clocks = <&xlnx_vcu 0>, <&xlnx_vcu 1>,
+            <&clkc 71>, <&clkc 71>, <&clkc 71>;
+            clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
+            "m_axi_mcu_aclk", "s_axi_lite_aclk";
+        };
+    };
+  - |
+    fpga {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        al5d: video-codec@a0029000 {
+            compatible = "allegro,al5d-1.1", "allegro,al5d";
+            reg = <0 0xa0029000 0 0x1000>,
+                  <0 0xa0020000 0 0x8000>;
+            reg-names = "regs", "sram";
+            interrupts = <0 96 4>;
+            clocks = <&xlnx_vcu 2>, <&xlnx_vcu 3>,
+                     <&clkc 71>, <&clkc 71>, <&clkc 71>;
+            clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
+            "m_axi_mcu_aclk", "s_axi_lite_aclk";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allegro.txt b/Documentation/devicetree/bindings/media/allegro.txt
deleted file mode 100644
index a92e2fbf26c9..000000000000
--- a/Documentation/devicetree/bindings/media/allegro.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Device-tree bindings for the Allegro DVT video IP codecs present in the Xilinx
-ZynqMP SoC. The IP core may either be a H.264/H.265 encoder or H.264/H.265
-decoder ip core.
-
-Each actual codec engines is controlled by a microcontroller (MCU). Host
-software uses a provided mailbox interface to communicate with the MCU. The
-MCU share an interrupt.
-
-Required properties:
-  - compatible: value should be one of the following
-    "allegro,al5e-1.1", "allegro,al5e": encoder IP core
-    "allegro,al5d-1.1", "allegro,al5d": decoder IP core
-  - reg: base and length of the memory mapped register region and base and
-    length of the memory mapped sram
-  - reg-names: must include "regs" and "sram"
-  - interrupts: shared interrupt from the MCUs to the processing system
-  - clocks: must contain an entry for each entry in clock-names
-  - clock-names: must include "core_clk", "mcu_clk", "m_axi_core_aclk",
-    "m_axi_mcu_aclk", "s_axi_lite_aclk"
-
-Example:
-	al5e: video-codec@a0009000 {
-		compatible = "allegro,al5e-1.1", "allegro,al5e";
-		reg = <0 0xa0009000 0 0x1000>,
-		      <0 0xa0000000 0 0x8000>;
-		reg-names = "regs", "sram";
-		interrupts = <0 96 4>;
-		clocks = <&xlnx_vcu 0>, <&xlnx_vcu 1>,
-			 <&clkc 71>, <&clkc 71>, <&clkc 71>;
-		clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
-			      "m_axi_mcu_aclk", "s_axi_lite_aclk"
-	};
-	al5d: video-codec@a0029000 {
-		compatible = "allegro,al5d-1.1", "allegro,al5d";
-		reg = <0 0xa0029000 0 0x1000>,
-		      <0 0xa0020000 0 0x8000>;
-		reg-names = "regs", "sram";
-		interrupts = <0 96 4>;
-		clocks = <&xlnx_vcu 2>, <&xlnx_vcu 3>,
-			 <&clkc 71>, <&clkc 71>, <&clkc 71>;
-		clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
-			      "m_axi_mcu_aclk", "s_axi_lite_aclk"
-	};
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
index 8453ee340b9f..617264ce477d 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings
+title: Allwinner A10 CMOS Sensor Interface (CSI)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -20,11 +20,11 @@ properties:
       - const: allwinner,sun4i-a10-csi1
       - const: allwinner,sun7i-a20-csi0
       - items:
-        - const: allwinner,sun7i-a20-csi1
-        - const: allwinner,sun4i-a10-csi1
+          - const: allwinner,sun7i-a20-csi1
+          - const: allwinner,sun4i-a10-csi1
       - items:
-        - const: allwinner,sun8i-r40-csi0
-        - const: allwinner,sun7i-a20-csi0
+          - const: allwinner,sun8i-r40-csi0
+          - const: allwinner,sun7i-a20-csi0
 
   reg:
     maxItems: 1
@@ -35,24 +35,24 @@ properties:
   clocks:
     oneOf:
       - items:
-        - description: The CSI interface clock
-        - description: The CSI DRAM clock
+          - description: The CSI interface clock
+          - description: The CSI DRAM clock
 
       - items:
-        - description: The CSI interface clock
-        - description: The CSI ISP clock
-        - description: The CSI DRAM clock
+          - description: The CSI interface clock
+          - description: The CSI ISP clock
+          - description: The CSI DRAM clock
 
   clock-names:
     oneOf:
       - items:
-        - const: bus
-        - const: ram
+          - const: bus
+          - const: ram
 
       - items:
-        - const: bus
-        - const: isp
-        - const: ram
+          - const: bus
+          - const: isp
+          - const: ram
 
   resets:
     maxItems: 1
@@ -67,14 +67,14 @@ properties:
   interconnect-names:
     const: dma-mem
 
-  # See ./video-interfaces.txt for details
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/$defs/port-base
     additionalProperties: false
 
     properties:
       endpoint:
-        type: object
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
 
         properties:
           bus-width:
@@ -83,7 +83,6 @@ properties:
           data-active: true
           hsync-active: true
           pclk-sample: true
-          remote-endpoint: true
           vsync-active: true
 
         required:
@@ -91,12 +90,8 @@ properties:
           - data-active
           - hsync-active
           - pclk-sample
-          - remote-endpoint
           - vsync-active
 
-    required:
-      - endpoint
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
index 7838804700d6..704033e21ee8 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-ir.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Infrared Controller Device Tree Bindings
+title: Allwinner A10 Infrared Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -18,15 +18,14 @@ properties:
     oneOf:
       - const: allwinner,sun4i-a10-ir
       - const: allwinner,sun5i-a13-ir
-      - items:
-          - const: allwinner,sun8i-a83t-ir
-          - const: allwinner,sun6i-a31-ir
       - const: allwinner,sun6i-a31-ir
       - items:
-          - const: allwinner,sun50i-a64-ir
-          - const: allwinner,sun6i-a31-ir
-      - items:
-          - const: allwinner,sun50i-h6-ir
+          - enum:
+              - allwinner,sun8i-a83t-ir
+              - allwinner,sun8i-r40-ir
+              - allwinner,sun50i-a64-ir
+              - allwinner,sun50i-h6-ir
+              - allwinner,sun50i-h616-ir
           - const: allwinner,sun6i-a31-ir
 
   reg:
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
index 526593c8c614..541325f900a1 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-video-engine.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Video Engine Device Tree Bindings
+title: Allwinner A10 Video Engine
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -18,6 +18,9 @@ properties:
       - allwinner,sun7i-a20-video-engine
       - allwinner,sun8i-a33-video-engine
       - allwinner,sun8i-h3-video-engine
+      - allwinner,sun8i-v3s-video-engine
+      - allwinner,sun8i-r40-video-engine
+      - allwinner,sun20i-d1-video-engine
       - allwinner,sun50i-a64-video-engine
       - allwinner,sun50i-h5-video-engine
       - allwinner,sun50i-h6-video-engine
@@ -45,9 +48,17 @@ properties:
 
   allwinner,sram:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
     description: Phandle to the device SRAM
 
+  iommus:
+    maxItems: 1
+
   memory-region:
+    maxItems: 1
     description:
       CMA pool to use for buffers allocation instead of the default
       CMA pool.
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml
new file mode 100644
index 000000000000..24d7bf21499e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/allwinner,sun50i-h6-vpu-g2.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Hantro G2 VPU codec implemented on Allwinner H6 SoC
+
+maintainers:
+  - Jernej Skrabec <jernej.skrabec@gmail.com>
+
+description:
+  Hantro G2 video decode accelerator present on Allwinner H6 SoC.
+
+properties:
+  compatible:
+    const: allwinner,sun50i-h6-vpu-g2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    video-codec-g2@1c00000 {
+        compatible = "allwinner,sun50i-h6-vpu-g2";
+        reg = <0x01c00000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_VP9>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
index 1fd9b5532a21..f1ccca35a790 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 CMOS Sensor Interface (CSI) Device Tree Bindings
+title: Allwinner A31 CMOS Sensor Interface (CSI)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -40,17 +40,16 @@ properties:
   resets:
     maxItems: 1
 
-  # See ./video-interfaces.txt for details
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: Parallel input port, connect to a parallel sensor
 
     properties:
       endpoint:
-        type: object
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
 
         properties:
-          remote-endpoint: true
-
           bus-width:
             enum: [ 8, 10, 12, 16 ]
 
@@ -60,12 +59,25 @@ properties:
 
         required:
           - bus-width
-          - remote-endpoint
 
-    required:
-      - endpoint
+    unevaluatedProperties: false
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: "#/properties/port"
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 bridge input port
 
-    additionalProperties: false
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
 
 required:
   - compatible
@@ -75,6 +87,12 @@ required:
   - clock-names
   - resets
 
+oneOf:
+  - required:
+      - ports
+  - required:
+      - port
+
 additionalProperties: false
 
 examples:
@@ -95,19 +113,25 @@ examples:
                       "ram";
         resets = <&ccu RST_BUS_CSI>;
 
-        port {
-            /* Parallel bus endpoint */
-            csi1_ep: endpoint {
-                remote-endpoint = <&adv7611_ep>;
-                bus-width = <16>;
-
-                /*
-                 * If hsync-active/vsync-active are missing,
-                 * embedded BT.656 sync is used.
-                 */
-                 hsync-active = <0>; /* Active low */
-                 vsync-active = <0>; /* Active low */
-                 pclk-sample = <1>;  /* Rising */
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                /* Parallel bus endpoint */
+                csi1_ep: endpoint {
+                    remote-endpoint = <&adv7611_ep>;
+                    bus-width = <16>;
+
+                    /*
+                     * If hsync-active/vsync-active are missing,
+                     * embedded BT.656 sync is used.
+                     */
+                    hsync-active = <0>; /* Active low */
+                    vsync-active = <0>; /* Active low */
+                    pclk-sample = <1>;  /* Rising */
+                };
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
new file mode 100644
index 000000000000..54e15ab8a7f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 MIPI CSI-2
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun6i-a31-mipi-csi2
+      - items:
+          - const: allwinner,sun8i-v3s-mipi-csi2
+          - const: allwinner,sun6i-a31-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  phys:
+    maxItems: 1
+    description: MIPI D-PHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Input port, connect to a MIPI CSI-2 sensor
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port, connect to a CSI controller
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    mipi_csi2: csi@1cb1000 {
+        compatible = "allwinner,sun8i-v3s-mipi-csi2",
+                     "allwinner,sun6i-a31-mipi-csi2";
+        reg = <0x01cb1000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+                 <&ccu CLK_CSI1_SCLK>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_CSI>;
+
+        phys = <&dphy>;
+        phy-names = "dphy";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mipi_csi2_in: port@0 {
+                reg = <0>;
+
+                mipi_csi2_in_ov5648: endpoint {
+                    data-lanes = <1 2 3 4>;
+
+                    remote-endpoint = <&ov5648_out_mipi_csi2>;
+                };
+            };
+
+            mipi_csi2_out: port@1 {
+                reg = <1>;
+
+                mipi_csi2_out_csi0: endpoint {
+                    remote-endpoint = <&csi0_in_mipi_csi2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
new file mode 100644
index 000000000000..c2f292dd01ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-de2-rotate.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83T DE2 Rotate
+
+maintainers:
+  - Jernej Skrabec <jernej.skrabec@siol.net>
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |-
+  The Allwinner A83T and A64 have a rotation core used for
+  rotating and flipping images.
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun8i-a83t-de2-rotate
+      - items:
+          - const: allwinner,sun50i-a64-de2-rotate
+          - const: allwinner,sun8i-a83t-de2-rotate
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Rotate interface clock
+      - description: Rotate module clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-de2.h>
+    #include <dt-bindings/reset/sun8i-de2.h>
+
+    rotate: rotate@1020000 {
+        compatible = "allwinner,sun8i-a83t-de2-rotate";
+        reg = <0x1020000 0x10000>;
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&display_clocks CLK_BUS_ROT>,
+                 <&display_clocks CLK_ROT>;
+        clock-names = "bus",
+                      "mod";
+        resets = <&display_clocks RST_ROT>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
new file mode 100644
index 000000000000..3cac68a87ad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83T MIPI CSI-2
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    const: allwinner,sun8i-a83t-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: MIPI-specific Clock
+      - description: Misc CSI Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: mipi
+      - const: misc
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Input port, connect to a MIPI CSI-2 sensor
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port, connect to a CSI controller
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+    #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+    mipi_csi2: csi@1cb1000 {
+        compatible = "allwinner,sun8i-a83t-mipi-csi2";
+        reg = <0x01cb1000 0x1000>;
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+                 <&ccu CLK_CSI_SCLK>,
+                 <&ccu CLK_MIPI_CSI>,
+                 <&ccu CLK_CSI_MISC>;
+        clock-names = "bus", "mod", "mipi", "misc";
+        resets = <&ccu RST_BUS_CSI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mipi_csi2_in: port@0 {
+                reg = <0>;
+
+                mipi_csi2_in_ov8865: endpoint {
+                    data-lanes = <1 2 3 4>;
+
+                    remote-endpoint = <&ov8865_out_mipi_csi2>;
+                };
+            };
+
+            mipi_csi2_out: port@1 {
+                reg = <1>;
+
+                mipi_csi2_out_csi: endpoint {
+                    remote-endpoint = <&csi_in_mipi_csi2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
index 2e40f700e84f..3ccd52164f5b 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun8i-h3-deinterlace.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H3 Deinterlace Device Tree Bindings
+title: Allwinner H3 Deinterlace
 
 maintainers:
   - Jernej Skrabec <jernej.skrabec@siol.net>
@@ -17,7 +17,14 @@ description: |-
 
 properties:
   compatible:
-    const: allwinner,sun8i-h3-deinterlace
+    oneOf:
+      - const: allwinner,sun8i-h3-deinterlace
+      - items:
+          - const: allwinner,sun8i-r40-deinterlace
+          - const: allwinner,sun8i-h3-deinterlace
+      - items:
+          - const: allwinner,sun50i-a64-deinterlace
+          - const: allwinner,sun8i-h3-deinterlace
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
new file mode 100644
index 000000000000..e551be5e680e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/amlogic,axg-ge2d.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic GE2D Acceleration Unit
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,axg-ge2d
+
+  interrupts:
+    minItems: 1
+
+  reg:
+    minItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    ge2d: ge2d@ff940000 {
+          compatible = "amlogic,axg-ge2d";
+          reg = <0xff940000 0x10000>;
+          interrupts = <150>;
+          clocks = <&clk_ge2d>;
+          resets = <&reset_ge2d>;
+    };
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
index 335717e15970..b827edabcafa 100644
--- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Video Decoder
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Maxime Jourdan <mjourdan@baylibre.com>
 
 description: |
@@ -29,14 +29,14 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - amlogic,gxbb-vdec # GXBB (S905)
-          - amlogic,gxl-vdec # GXL (S905X, S905D)
-          - amlogic,gxm-vdec # GXM (S912)
-        - const: amlogic,gx-vdec
+          - enum:
+              - amlogic,gxbb-vdec # GXBB (S905)
+              - amlogic,gxl-vdec # GXL (S905X, S905D)
+              - amlogic,gxm-vdec # GXM (S912)
+          - const: amlogic,gx-vdec
       - enum:
-        - amlogic,g12a-vdec # G12A (S905X2, S905D2)
-        - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
+          - amlogic,g12a-vdec # G12A (S905X2, S905D2)
+          - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
 
   interrupts:
     minItems: 2
@@ -67,7 +67,6 @@ properties:
 
   clock-names:
     minItems: 4
-    maxItems: 5
     items:
       - const: dos_parser
       - const: dos
@@ -77,13 +76,11 @@ properties:
 
   amlogic,ao-sysctrl:
     description: should point to the AOBUS sysctrl node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   amlogic,canvas:
     description: should point to a canvas provider node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
 allOf:
   - if:
@@ -124,6 +121,8 @@ required:
   - amlogic,ao-sysctrl
   - amlogic,canvas
 
+additionalProperties: false
+
 examples:
   - |
     vdec: video-decoder@c8820000 {
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
index 41197578f19a..8d844f4312d1 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson AO-CEC Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
@@ -24,13 +24,18 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
   interrupts:
     maxItems: 1
 
   hdmi-phandle:
     description: phandle to the HDMI controller
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
 
 allOf:
   - if:
@@ -47,7 +52,6 @@ allOf:
             - description: AO-CEC clock
 
         clock-names:
-          maxItems: 1
           items:
             - const: core
 
@@ -66,7 +70,6 @@ allOf:
             - description: AO-CEC clock generator source
 
         clock-names:
-          maxItems: 1
           items:
             - const: oscin
 
@@ -78,14 +81,15 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     cec_AO: cec@100 {
         compatible = "amlogic,meson-gx-ao-cec";
-        reg = <0x0 0x00100 0x0 0x14>;
+        reg = <0x00100 0x14>;
         interrupts = <199>;
         clocks = <&clkc_cec>;
         clock-names = "core";
         hdmi-phandle = <&hdmi_tx>;
     };
-
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml
new file mode 100644
index 000000000000..4432fea32650
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/amlogic,meson-ir-tx.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson IR transmitter
+
+maintainers:
+  - Viktor Prutyanov <viktor.prutyanov@phystech.edu>
+
+description: |
+  Some Amlogic SoCs such as A311D and T950D4 have IR transmitter
+  (also called blaster) controller onboard. It is capable of
+  sending IR signals with arbitrary carrier frequency and duty cycle.
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-ir-tx
+      - items:
+          - const: amlogic,meson-g12a-ir-tx
+          - const: amlogic,meson-ir-tx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sysclk
+      - const: xtal
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/g12a-clkc.h>
+
+    ir@ff80014c {
+      compatible = "amlogic,meson-g12a-ir-tx", "amlogic,meson-ir-tx";
+      reg = <0xff80014c 0x10>;
+      interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&clkc CLKID_CLK81>, <&xtal>;
+      clock-names = "sysclk", "xtal";
+    };
diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
new file mode 100644
index 000000000000..a9d80eaeeeb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amphion,vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amphion VPU codec IP
+
+maintainers:
+  - Ming Qian <ming.qian@nxp.com>
+  - Shijie Qin <shijie.qin@nxp.com>
+
+description: |-
+  The Amphion MXC video encoder(Windsor) and decoder(Malone) accelerators present
+  on NXP i.MX8Q SoCs.
+
+properties:
+  $nodename:
+    pattern: "^vpu@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - nxp,imx8qm-vpu
+          - nxp,imx8qxp-vpu
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^mailbox@[0-9a-f]+$":
+    description:
+      Each vpu encoder or decoder correspond a MU, which used for communication
+      between driver and firmware. Implement via mailbox on driver.
+    $ref: ../mailbox/fsl,mu.yaml#
+
+
+  "^vpu_core@[0-9a-f]+$":
+    description:
+      Each core correspond a decoder or encoder, need to configure them
+      separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC
+      has one decoder and one encoder.
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - nxp,imx8q-vpu-decoder
+              - nxp,imx8q-vpu-encoder
+
+      reg:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      mbox-names:
+        items:
+          - const: tx0
+          - const: tx1
+          - const: rx
+
+      mboxes:
+        description:
+          List of phandle of 2 MU channels for tx, 1 MU channel for rx.
+        maxItems: 3
+
+      memory-region:
+        description:
+          Phandle to the reserved memory nodes to be associated with the
+          remoteproc device. The reserved memory nodes should be carveout nodes,
+          and should be defined as per the bindings in
+          Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+        items:
+          - description: region reserved for firmware image sections.
+          - description: region used for RPC shared memory between firmware and
+                         driver.
+
+    required:
+      - compatible
+      - reg
+      - power-domains
+      - mbox-names
+      - mboxes
+      - memory-region
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  # Device node example for i.MX8QM platform:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    vpu: vpu@2c000000 {
+      compatible = "nxp,imx8qm-vpu";
+      ranges = <0x2c000000 0x2c000000 0x2000000>;
+      reg = <0x2c000000 0x1000000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      power-domains = <&pd IMX_SC_R_VPU>;
+
+      mu_m0: mailbox@2d000000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d000000 0x20000>;
+        interrupts = <0 472 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_0>;
+      };
+
+      mu1_m0: mailbox@2d020000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d020000 0x20000>;
+        interrupts = <0 473 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_1>;
+      };
+
+      mu2_m0: mailbox@2d040000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d040000 0x20000>;
+        interrupts = <0 474 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_2>;
+      };
+
+      vpu_core0: vpu_core@2d080000 {
+        compatible = "nxp,imx8q-vpu-decoder";
+        reg = <0x2d080000 0x10000>;
+        power-domains = <&pd IMX_SC_R_VPU_DEC_0>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu_m0 0 0>,
+                 <&mu_m0 0 1>,
+                 <&mu_m0 1 0>;
+        memory-region = <&decoder_boot>, <&decoder_rpc>;
+      };
+
+      vpu_core1: vpu_core@2d090000 {
+        compatible = "nxp,imx8q-vpu-encoder";
+        reg = <0x2d090000 0x10000>;
+        power-domains = <&pd IMX_SC_R_VPU_ENC_0>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu1_m0 0 0>,
+                 <&mu1_m0 0 1>,
+                 <&mu1_m0 1 0>;
+        memory-region = <&encoder1_boot>, <&encoder1_rpc>;
+      };
+
+      vpu_core2: vpu_core@2d0a0000 {
+        reg = <0x2d0a0000 0x10000>;
+        compatible = "nxp,imx8q-vpu-encoder";
+        power-domains = <&pd IMX_SC_R_VPU_ENC_1>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu2_m0 0 0>,
+                 <&mu2_m0 0 1>,
+                 <&mu2_m0 1 0>;
+        memory-region = <&encoder2_boot>, <&encoder2_rpc>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/aspeed-video.txt b/Documentation/devicetree/bindings/media/aspeed-video.txt
index ce2894506e1f..d2ca32512272 100644
--- a/Documentation/devicetree/bindings/media/aspeed-video.txt
+++ b/Documentation/devicetree/bindings/media/aspeed-video.txt
@@ -1,11 +1,12 @@
 * Device tree bindings for Aspeed Video Engine
 
-The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs can
+The Video Engine (VE) embedded in the Aspeed AST2400/2500/2600 SOCs can
 capture and compress video data from digital or analog sources.
 
 Required properties:
  - compatible:		"aspeed,ast2400-video-engine" or
-			"aspeed,ast2500-video-engine"
+			"aspeed,ast2500-video-engine" or
+			"aspeed,ast2600-video-engine"
  - reg:			contains the offset and length of the VE memory region
  - clocks:		clock specifiers for the syscon clocks associated with
 			the VE (ordering must match the clock-names property)
diff --git a/Documentation/devicetree/bindings/media/atmel,isc.yaml b/Documentation/devicetree/bindings/media/atmel,isc.yaml
new file mode 100644
index 000000000000..cd6d7af0c768
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/atmel,isc.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2016-2021 Microchip Technology, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/atmel,isc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Image Sensor Controller (ISC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+description: |
+  The Image Sensor Controller (ISC) device provides the video input capabilities for the
+  Atmel/Microchip AT91 SAMA family of devices.
+
+  The ISC has a single parallel input that supports RAW Bayer, RGB or YUV video,
+  with both external synchronization and BT.656 synchronization for the latter.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-isc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: hclock
+      - const: iscck
+      - const: gck
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    const: isc-mck
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Input port node, single endpoint describing the input pad.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+
+        properties:
+          remote-endpoint: true
+
+          bus-width:
+            enum: [8, 9, 10, 11, 12]
+            default: 12
+
+          hsync-active:
+            enum: [0, 1]
+            default: 1
+
+          vsync-active:
+            enum: [0, 1]
+            default: 1
+
+          pclk-sample:
+            enum: [0, 1]
+            default: 1
+
+        required:
+          - remote-endpoint
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - clock-output-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    isc: isc@f0008000 {
+        compatible = "atmel,sama5d2-isc";
+        reg = <0xf0008000 0x4000>;
+        interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
+        clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
+        clock-names = "hclock", "iscck", "gck";
+        #clock-cells = <0>;
+        clock-output-names = "isc-mck";
+
+        port {
+                isc_0: endpoint {
+                       remote-endpoint = <&ov7740_0>;
+                       hsync-active = <1>;
+                       vsync-active = <0>;
+                       pclk-sample = <1>;
+                       bus-width = <8>;
+                };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt
deleted file mode 100644
index bbe0e87c6188..000000000000
--- a/Documentation/devicetree/bindings/media/atmel-isc.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Atmel Image Sensor Controller (ISC)
-----------------------------------------------
-
-Required properties for ISC:
-- compatible
-	Must be "atmel,sama5d2-isc".
-- reg
-	Physical base address and length of the registers set for the device.
-- interrupts
-	Should contain IRQ line for the ISC.
-- clocks
-	List of clock specifiers, corresponding to entries in
-	the clock-names property;
-	Please refer to clock-bindings.txt.
-- clock-names
-	Required elements: "hclock", "iscck", "gck".
-- #clock-cells
-	Should be 0.
-- clock-output-names
-	Should be "isc-mck".
-- pinctrl-names, pinctrl-0
-	Please refer to pinctrl-bindings.txt.
-
-ISC supports a single port node with parallel bus. It should contain one
-'port' child node with child 'endpoint' node. Please refer to the bindings
-defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-isc: isc@f0008000 {
-	compatible = "atmel,sama5d2-isc";
-	reg = <0xf0008000 0x4000>;
-	interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
-	clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
-	clock-names = "hclock", "iscck", "gck";
-	#clock-cells = <0>;
-	clock-output-names = "isc-mck";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
-
-	port {
-		isc_0: endpoint {
-			remote-endpoint = <&ov7740_0>;
-			hsync-active = <1>;
-			vsync-active = <0>;
-			pclk-sample = <1>;
-		};
-	};
-};
-
-i2c1: i2c@fc028000 {
-	ov7740: camera@21 {
-		compatible = "ovti,ov7740";
-		reg = <0x21>;
-		clocks = <&isc>;
-		clock-names = "xvclk";
-		assigned-clocks = <&isc>;
-		assigned-clock-rates = <24000000>;
-
-		port {
-			ov7740_0: endpoint {
-				remote-endpoint = <&isc_0>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/coda.txt b/Documentation/devicetree/bindings/media/coda.txt
deleted file mode 100644
index 90eb74cc1993..000000000000
--- a/Documentation/devicetree/bindings/media/coda.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Chips&Media Coda multi-standard codec IP
-========================================
-
-Coda codec IPs are present in i.MX SoCs in various versions,
-called VPU (Video Processing Unit).
-
-Required properties:
-- compatible : should be "fsl,<chip>-src" for i.MX SoCs:
-  (a) "fsl,imx27-vpu" for CodaDx6 present in i.MX27
-  (b) "fsl,imx51-vpu" for CodaHx4 present in i.MX51
-  (c) "fsl,imx53-vpu" for CODA7541 present in i.MX53
-  (d) "fsl,imx6q-vpu" for CODA960 present in i.MX6q
-- reg: should be register base and length as documented in the
-  SoC reference manual
-- interrupts : Should contain the VPU interrupt. For CODA960,
-  a second interrupt is needed for the MJPEG unit.
-- clocks : Should contain the ahb and per clocks, in the order
-  determined by the clock-names property.
-- clock-names : Should be "ahb", "per"
-- iram : phandle pointing to the SRAM device node
-
-Example:
-
-vpu: vpu@63ff4000 {
-	compatible = "fsl,imx53-vpu";
-	reg = <0x63ff4000 0x1000>;
-	interrupts = <9>;
-	clocks = <&clks 63>, <&clks 63>;
-	clock-names = "ahb", "per";
-	iram = <&ocram>;
-};
diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml
new file mode 100644
index 000000000000..c9d5adbc8c4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/coda.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/coda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chips&Media Coda multi-standard codec IP
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |-
+  Coda codec IPs are present in i.MX SoCs in various versions,
+  called VPU (Video Processing Unit).
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: fsl,imx27-vpu
+          - const: cnm,codadx6
+      - items:
+          - const: fsl,imx51-vpu
+          - const: cnm,codahx4
+      - items:
+          - const: fsl,imx53-vpu
+          - const: cnm,coda7541
+      - items:
+          - enum:
+              - fsl,imx6dl-vpu
+              - fsl,imx6q-vpu
+          - const: cnm,coda960
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PER clock
+      - description: AHB interface clock
+
+  clock-names:
+    items:
+      - const: per
+      - const: ahb
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: BIT processor interrupt
+      - description: JPEG unit interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: bit
+      - const: jpeg
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle pointing to the SRAM device node
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: cnm,coda960
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+
+        interrupt-names:
+          minItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
+        power-domains: false
+
+examples:
+  - |
+    vpu: video-codec@63ff4000 {
+        compatible = "fsl,imx53-vpu", "cnm,coda7541";
+        reg = <0x63ff4000 0x1000>;
+        interrupts = <9>;
+        clocks = <&clks 63>, <&clks 63>;
+        clock-names = "per", "ahb";
+        iram = <&ocram>;
+    };
diff --git a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt
deleted file mode 100644
index ce9a22689e53..000000000000
--- a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Samsung S5P/Exynos SoC series JPEG codec
-
-Required properties:
-
-- compatible	: should be one of:
-		  "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg",
-		  "samsung,exynos3250-jpeg", "samsung,exynos5420-jpeg",
-		  "samsung,exynos5433-jpeg";
-- reg		: address and length of the JPEG codec IP register set;
-- interrupts	: specifies the JPEG codec IP interrupt;
-- clock-names   : should contain:
-		   - "jpeg" for the core gate clock,
-		   - "sclk" for the special clock (optional).
-- clocks	: should contain the clock specifier and clock ID list
-		  matching entries in the clock-names property; from
-		  the common clock bindings.
diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
deleted file mode 100644
index 1872688fa408..000000000000
--- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Samsung Exynos5 G-Scaler device
-
-G-Scaler is used for scaling and color space conversion on Exynos5 SoCs.
-
-Required properties:
-- compatible: should be one of
-	      "samsung,exynos5250-gsc"
-	      "samsung,exynos5420-gsc"
-	      "samsung,exynos5433-gsc"
-	      "samsung,exynos5-gsc" (deprecated)
-- reg: should contain G-Scaler physical address location and length.
-- interrupts: should contain G-Scaler interrupt number
-
-Optional properties:
-- samsung,sysreg: handle to syscon used to control the system registers to
-  set writeback input and destination
-
-Example:
-
-gsc_0:  gsc@13e00000 {
-	compatible = "samsung,exynos5250-gsc";
-	reg = <0x13e00000 0x1000>;
-	interrupts = <0 85 0>;
-};
-
-Aliases:
-Each G-Scaler node should have a numbered alias in the aliases node,
-in the form of gscN, N = 0...3. G-Scaler driver uses these aliases
-to retrieve the device IDs using "of_alias_get_id()" call.
-
-Example:
-
-aliases {
-	gsc0 =&gsc_0;
-	gsc1 =&gsc_1;
-	gsc2 =&gsc_2;
-	gsc3 =&gsc_3;
-};
diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt b/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
deleted file mode 100644
index 58261fb7b408..000000000000
--- a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Device-Tree bindings for GPIO IR receiver
-
-Required properties:
-	- compatible: should be "gpio-ir-receiver".
-	- gpios: specifies GPIO used for IR signal reception.
-
-Optional properties:
-	- linux,rc-map-name: see rc.txt file in the same
-	  directory.
-
-Example node:
-
-	ir: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 19 1>;
-		linux,rc-map-name = "rc-rc6-mce";
-	};
diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml
new file mode 100644
index 000000000000..61072745b983
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/gpio-ir-receiver.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO Based IR receiver
+
+maintainers:
+  - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+
+allOf:
+  - $ref: rc.yaml#
+
+properties:
+  compatible:
+    const: gpio-ir-receiver
+
+  gpios:
+    maxItems: 1
+
+  linux,autosuspend-period:
+    description: autosuspend delay time in milliseconds
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ir-receiver {
+        compatible = "gpio-ir-receiver";
+        gpios = <&gpio0 19 1>;
+        linux,rc-map-name = "rc-rc6-mce";
+        linux,autosuspend-period = <125>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.txt b/Documentation/devicetree/bindings/media/i2c/adv7180.txt
deleted file mode 100644
index 552b6a82cb1f..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/adv7180.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Analog Devices ADV7180 analog video decoder family
-
-The adv7180 family devices are used to capture analog video to different
-digital interfaces like MIPI CSI-2 or parallel video.
-
-Required Properties :
-- compatible : value must be one of
-		"adi,adv7180"
-		"adi,adv7180cp"
-		"adi,adv7180st"
-		"adi,adv7182"
-		"adi,adv7280"
-		"adi,adv7280-m"
-		"adi,adv7281"
-		"adi,adv7281-m"
-		"adi,adv7281-ma"
-		"adi,adv7282"
-		"adi,adv7282-m"
-
-Device nodes of "adi,adv7180cp" and "adi,adv7180st" must contain one
-'port' child node per device input and output port, in accordance with the
-video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt. The port
-nodes are numbered as follows.
-
-  Port		adv7180cp	adv7180st
--------------------------------------------------------------------
-  Input		0-2		0-5
-  Output	3		6
-
-The digital output port node must contain at least one endpoint.
-
-Optional Properties :
-- powerdown-gpios: reference to the GPIO connected to the powerdown pin,
-  if any.
-
-
-Example:
-
-	i2c0@1c22000 {
-		...
-		...
-		adv7180@21 {
-			compatible = "adi,adv7180";
-			reg = <0x21>;
-		};
-		...
-	};
-
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
new file mode 100644
index 000000000000..c8d887eee3bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adv7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV7180 analog video decoder family
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+
+description:
+  The adv7180 family devices are used to capture analog video to different
+  digital interfaces like MIPI CSI-2 or parallel video.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adi,adv7180
+          - adi,adv7180cp
+          - adi,adv7180st
+          - adi,adv7182
+          - adi,adv7280
+          - adi,adv7280-m
+          - adi,adv7281
+          - adi,adv7281-m
+          - adi,adv7281-ma
+          - adi,adv7282
+          - adi,adv7282-m
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  adv,force-bt656-4:
+    description:
+      Indicates that the output is a BT.656-4 compatible stream.
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+  ports: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,adv7180
+            - adi,adv7182
+            - adi,adv7280
+            - adi,adv7280-m
+            - adi,adv7281
+            - adi,adv7281-m
+            - adi,adv7281-ma
+            - adi,adv7282
+            - adi,adv7282-m
+    then:
+      required:
+        - port
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7180cp
+    then:
+      properties:
+        ports:
+          $ref: /schemas/graph.yaml#/properties/ports
+          properties:
+            port@3:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Output port
+
+          patternProperties:
+            "^port@[0-2]$":
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Input port
+
+          required:
+            - port@3
+
+      required:
+        - ports
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7180st
+    then:
+      properties:
+        ports:
+          $ref: /schemas/graph.yaml#/properties/ports
+          properties:
+            port@6:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Output port
+
+          patternProperties:
+            "^port@[0-5]$":
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Input port
+
+          required:
+            - port@6
+
+      required:
+        - ports
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            composite-in@20 {
+                    compatible = "adi,adv7180";
+                    reg = <0x20>;
+
+                    port {
+                            adv7180: endpoint {
+                                    bus-width = <8>;
+                                    remote-endpoint = <&vin1ep>;
+                            };
+                    };
+            };
+
+    };
+
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            composite-in@20 {
+                    compatible = "adi,adv7180cp";
+                    reg = <0x20>;
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                                    adv7180_in: endpoint {
+                                            remote-endpoint = <&composite_con_in>;
+                                    };
+                            };
+
+                            port@3 {
+                                    reg = <3>;
+                                    adv7180_out: endpoint {
+                                            remote-endpoint = <&vin4_in>;
+                                    };
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
deleted file mode 100644
index 4f91686e54a6..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
+++ /dev/null
@@ -1,116 +0,0 @@
-* Analog Devices ADV748X video decoder with HDMI receiver
-
-The ADV7481 and ADV7482 are multi format video decoders with an integrated
-HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
-from three input sources HDMI, analog and TTL.
-
-Required Properties:
-
-  - compatible: Must contain one of the following
-    - "adi,adv7481" for the ADV7481
-    - "adi,adv7482" for the ADV7482
-
-  - reg: I2C slave addresses
-    The ADV748x has up to twelve 256-byte maps that can be accessed via the
-    main I2C ports. Each map has it own I2C address and acts as a standard
-    slave device on the I2C bus. The main address is mandatory, others are
-    optional and remain at default values if not specified.
-
-Optional Properties:
-
-  - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or
-		     "intrq3". All interrupts are optional. The "intrq3" interrupt
-		     is only available on the adv7481
-  - interrupts: Specify the interrupt lines for the ADV748x
-  - reg-names : Names of maps with programmable addresses.
-		It shall contain all maps needing a non-default address.
-		Possible map names are:
-		  "main", "dpll", "cp", "hdmi", "edid", "repeater",
-		  "infoframe", "cbus", "cec", "sdp", "txa", "txb"
-
-The device node must contain one 'port' child node per device input and output
-port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
-are numbered as follows.
-
-	  Name		Type		Port
-	---------------------------------------
-	  AIN0		sink		0
-	  AIN1		sink		1
-	  AIN2		sink		2
-	  AIN3		sink		3
-	  AIN4		sink		4
-	  AIN5		sink		5
-	  AIN6		sink		6
-	  AIN7		sink		7
-	  HDMI		sink		8
-	  TTL		sink		9
-	  TXA		source		10
-	  TXB		source		11
-
-The digital output port nodes, when present, shall contain at least one
-endpoint. Each of those endpoints shall contain the data-lanes property as
-described in video-interfaces.txt.
-
-Required source endpoint properties:
-  - data-lanes: an array of physical data lane indexes
-    The accepted value(s) for this property depends on which of the two
-    sources are described. For TXA 1, 2 or 4 data lanes can be described
-    while for TXB only 1 data lane is valid. See video-interfaces.txt
-    for detailed description.
-
-Ports are optional if they are not connected to anything at the hardware level.
-
-Example:
-
-	video-receiver@70 {
-		compatible = "adi,adv7482";
-		reg = <0x70 0x71 0x72 0x73 0x74 0x75
-		       0x60 0x61 0x62 0x63 0x64 0x65>;
-		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
-			    "infoframe", "cbus", "cec", "sdp", "txa", "txb";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gpio6>;
-		interrupt-names = "intrq1", "intrq2";
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
-			     <31 IRQ_TYPE_LEVEL_LOW>;
-
-		port@7 {
-			reg = <7>;
-
-			adv7482_ain7: endpoint {
-				remote-endpoint = <&cvbs_in>;
-			};
-		};
-
-		port@8 {
-			reg = <8>;
-
-			adv7482_hdmi: endpoint {
-				remote-endpoint = <&hdmi_in>;
-			};
-		};
-
-		port@a {
-			reg = <10>;
-
-			adv7482_txa: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1 2 3 4>;
-				remote-endpoint = <&csi40_in>;
-			};
-		};
-
-		port@b {
-			reg = <11>;
-
-			adv7482_txb: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1>;
-				remote-endpoint = <&csi20_in>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.yaml b/Documentation/devicetree/bindings/media/i2c/adv748x.yaml
new file mode 100644
index 000000000000..d6353081402b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adv748x.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adv748x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV748X video decoder with HDMI receiver
+
+maintainers:
+  - Kieran Bingham <kieran.bingham@ideasonboard.com>
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The ADV7481 and ADV7482 are multi format video decoders with an integrated
+  HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
+  from three input sources HDMI, analog and TTL.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adi,adv7481
+          - adi,adv7482
+
+  reg:
+    minItems: 1
+    maxItems: 12
+    description:
+      The ADV748x has up to twelve 256-byte maps that can be accessed via the
+      main I2C ports. Each map has it own I2C address and acts as a standard
+      slave device on the I2C bus. The main address is mandatory, others are
+      optional and remain at default values if not specified.
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: main
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+
+  interrupts: true
+
+  interrupt-names: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      "^port@[0-7]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port nodes for analog inputs AIN[0-7].
+
+    properties:
+      port@8:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port node for HDMI.
+
+      port@9:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port node for TTL.
+
+      port@a:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the CSI-2 transmitter TXA.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@b:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the CSI-2 transmitter TXB.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                maxItems: 1
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7481
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 3
+
+        interrupt-names:
+          minItems: 1
+          maxItems: 3
+          items:
+            enum: [ intrq1, intrq2, intrq3 ]
+    else:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 1
+          maxItems: 2
+          items:
+            enum: [ intrq1, intrq2 ]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ports
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        video-receiver@70 {
+            compatible = "adi,adv7482";
+            reg = <0x70 0x71 0x72 0x73 0x74 0x75
+                   0x60 0x61 0x62 0x63 0x64 0x65>;
+            reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+                        "infoframe", "cbus", "cec", "sdp", "txa", "txb";
+
+            interrupt-parent = <&gpio6>;
+            interrupts = <30 IRQ_TYPE_LEVEL_LOW>, <31 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "intrq1", "intrq2";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@7 {
+                    reg = <7>;
+
+                    adv7482_ain7: endpoint {
+                        remote-endpoint = <&cvbs_in>;
+                    };
+                };
+
+                port@8 {
+                    reg = <8>;
+
+                    adv7482_hdmi: endpoint {
+                        remote-endpoint = <&hdmi_in>;
+                    };
+                };
+
+                port@a {
+                    reg = <10>;
+
+                    adv7482_txa: endpoint {
+                        clock-lanes = <0>;
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csi40_in>;
+                    };
+                };
+
+                port@b {
+                    reg = <11>;
+
+                    adv7482_txb: endpoint {
+                        clock-lanes = <0>;
+                        data-lanes = <1>;
+                        remote-endpoint = <&csi20_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
deleted file mode 100644
index b3e688b77a38..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-* Analog Devices ADV7604/11/12 video decoder with HDMI receiver
-
-The ADV7604 and ADV7611/12 are multiformat video decoders with an integrated
-HDMI receiver. The ADV7604 has four multiplexed HDMI inputs and one analog
-input, and the ADV7611 has one HDMI input and no analog input. The 7612 is
-similar to the 7611 but has 2 HDMI inputs.
-
-These device tree bindings support the ADV7611/12 only at the moment.
-
-Required Properties:
-
-  - compatible: Must contain one of the following
-    - "adi,adv7611" for the ADV7611
-    - "adi,adv7612" for the ADV7612
-
-  - reg: I2C slave addresses
-    The ADV76xx has up to thirteen 256-byte maps that can be accessed via the
-    main I2C ports. Each map has it own I2C address and acts as a standard
-    slave device on the I2C bus. The main address is mandatory, others are
-    optional and revert to defaults if not specified.
-
-  - hpd-gpios: References to the GPIOs that control the HDMI hot-plug
-    detection pins, one per HDMI input. The active flag indicates the GPIO
-    level that enables hot-plug detection.
-
-The device node must contain one 'port' child node per device input and output
-port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
-are numbered as follows.
-
-  Port			ADV7611    ADV7612
-------------------------------------------------------------
-  HDMI			0             0, 1
-  Digital output	1                2
-
-The digital output port node must contain at least one endpoint.
-
-Optional Properties:
-
-  - reset-gpios: Reference to the GPIO connected to the device's reset pin.
-  - default-input: Select which input is selected after reset.
-  - reg-names : Names of maps with programmable addresses.
-		It can contain any map needing a non-default address.
-		Possible maps names are :
-		  "main", "avlink", "cec", "infoframe", "esdp", "dpp", "afe",
-		  "rep", "edid", "hdmi", "test", "cp", "vdp"
-
-Optional Endpoint Properties:
-
-  The following three properties are defined in video-interfaces.txt and are
-  valid for source endpoints only.
-
-  - hsync-active: Horizontal synchronization polarity. Defaults to active low.
-  - vsync-active: Vertical synchronization polarity. Defaults to active low.
-  - pclk-sample: Pixel clock polarity. Defaults to output on the falling edge.
-
-  If none of hsync-active, vsync-active and pclk-sample is specified the
-  endpoint will use embedded BT.656 synchronization.
-
-Example:
-
-	hdmi_receiver@4c {
-		compatible = "adi,adv7611";
-		/*
-		 * The edid page will be accessible @ 0x66 on the I2C bus. All
-		 * other maps will retain their default addresses.
-		 */
-		reg = <0x4c>, <0x66>;
-		reg-names = "main", "edid";
-
-		reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
-		hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		default-input = <0>;
-
-		port@0 {
-			reg = <0>;
-		};
-		port@1 {
-			reg = <1>;
-			hdmi_in: endpoint {
-				remote-endpoint = <&ccdc_in>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
new file mode 100644
index 000000000000..7589d377c686
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adv7604.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV7604/10/11/12 video decoder with HDMI receiver
+
+maintainers:
+  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
+
+description:
+  The ADV7604 and ADV7610/11/12 are multiformat video decoders with
+  an integrated HDMI receiver. The ADV7604 has four multiplexed HDMI inputs
+  and one analog input, and the ADV7610/11 have one HDMI input and no analog
+  input. The ADV7612 is similar to the ADV7610/11 but has 2 HDMI inputs.
+
+  These device tree bindings support the ADV7610/11/12 only at the moment.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adi,adv7610
+          - adi,adv7611
+          - adi,adv7612
+
+  reg:
+    minItems: 1
+    maxItems: 13
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: main
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  hpd-gpios:
+    minItems: 1
+    description:
+      References to the GPIOs that control the HDMI hot-plug detection pins,
+      one per HDMI input. The active flag indicates the GPIO level that
+      enables hot-plug detection.
+
+  default-input:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Select which input is selected after reset.
+
+  ports: true
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7611
+    then:
+      properties:
+        ports:
+          $ref: /schemas/graph.yaml#/properties/ports
+          properties:
+            port@0:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Input port
+
+            port@1:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Output port
+
+          required:
+            - port@1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7612
+    then:
+      properties:
+        ports:
+          $ref: /schemas/graph.yaml#/properties/ports
+          properties:
+            port@2:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Output port
+
+          patternProperties:
+            "^port@[0-1]$":
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Input port
+
+          required:
+            - port@2
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            hdmi_receiver@4c {
+                    compatible = "adi,adv7611";
+                    /*
+                     * The edid page will be accessible @ 0x66 on the I2C bus. All
+                     * other maps will retain their default addresses.
+                     */
+                    reg = <0x4c>, <0x66>;
+                    reg-names = "main", "edid";
+
+                    reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
+                    hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
+                    default-input = <0>;
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                            };
+
+                            port@1 {
+                                    reg = <1>;
+                                    hdmi_in: endpoint {
+                                            remote-endpoint = <&ccdc_in>;
+                                    };
+                            };
+                    };
+
+
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
new file mode 100644
index 000000000000..1d6af1bf9a6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/aptina,mt9p031.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor
+  with an active array size of 2592H x 1944V. It is programmable through a
+  simple two-wire serial interface.
+
+properties:
+  compatible:
+    enum:
+      - aptina,mt9p006
+      - aptina,mt9p031
+      - aptina,mt9p031m
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Digital supply voltage, 1.8 V
+
+  vdd_io-supply:
+    description: I/O supply voltage, 1.8 or 2.8 V
+
+  vaa-supply:
+    description: Analog supply voltage, 2.8 V
+
+  reset-gpios:
+    maxItems: 1
+    description: Chip reset GPIO
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          input-clock-frequency:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 6000000
+            maximum: 96000000
+            description: Input clock frequency
+
+          pixel-clock-frequency:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 96000000
+            description: Target pixel clock frequency
+
+          pclk-sample:
+            default: 0
+
+        required:
+          - input-clock-frequency
+          - pixel-clock-frequency
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdd-supply
+  - vdd_io-supply
+  - vaa-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mt9p031@5d {
+            compatible = "aptina,mt9p031";
+            reg = <0x5d>;
+            reset-gpios = <&gpio_sensor 0 0>;
+
+            clocks = <&sensor_clk>;
+
+            vdd-supply = <&reg_vdd>;
+            vdd_io-supply = <&reg_vdd_io>;
+            vaa-supply = <&reg_vaa>;
+
+            port {
+                mt9p031_1: endpoint {
+                    input-clock-frequency = <6000000>;
+                    pixel-clock-frequency = <96000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
deleted file mode 100644
index bd896e9f67d1..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Aptina MT9V111 CMOS sensor
-----------------------------
-
-The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
-based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
-
-The sensor has an active pixel array of 640x480 pixels and can output a number
-of image resolution and formats controllable through a simple two-wires
-interface.
-
-Required properties:
---------------------
-
-- compatible: shall be "aptina,mt9v111".
-- clocks: reference to the system clock input provider.
-
-Optional properties:
---------------------
-
-- enable-gpios: output enable signal, pin name "OE#". Active low.
-- standby-gpios: low power state control signal, pin name "STANDBY".
-  Active high.
-- reset-gpios: chip reset signal, pin name "RESET#". Active low.
-
-The device node must contain one 'port' child node with one 'endpoint' child
-sub-node for its digital output video port, in accordance with the video
-interface bindings defined in:
-Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
---------
-
-        &i2c1 {
-                camera@48 {
-                        compatible = "aptina,mt9v111";
-                        reg = <0x48>;
-
-                        clocks = <&camera_clk>;
-
-                        port {
-                                mt9v111_out: endpoint {
-                                        remote-endpoint = <&ceu_in>;
-                                };
-                        };
-                };
-        };
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
new file mode 100644
index 000000000000..e53b8d65f381
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aptina MT9V111 CMOS sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+  The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
+  based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
+
+  The sensor has an active pixel array of 640x480 pixels and can output a number
+  of image resolutions and formats controllable through a simple two-wires
+  interface.
+
+properties:
+  compatible:
+    const: aptina,mt9v111
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  enable-gpios:
+    description: Enable signal, pin name "OE#". Active low.
+    maxItems: 1
+
+  standby-gpios:
+    description: |
+      Low power state control signal, pin name "STANDBY". Active high.
+    maxItems: 1
+
+  reset-gpios:
+    description: Chip reset signal, pin name "RESET#". Active low.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: |
+      Output video port.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@48 {
+            compatible = "aptina,mt9v111";
+            reg = <0x48>;
+            clocks = <&camera_clk>;
+
+            port {
+                mt9v111_out: endpoint {
+                    remote-endpoint = <&ceu_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
new file mode 100644
index 000000000000..63e5b89d2e0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Chrontel HDMI-CEC Controller
+
+maintainers:
+  - Jeff Chase <jnchase@google.com>
+
+description:
+  The Chrontel CH7322 is a discrete HDMI-CEC controller. It is
+  programmable through I2C and drives a single CEC line.
+
+properties:
+  compatible:
+    const: chrontel,ch7322
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the RESET pin, if any. This
+      pin is active-low.
+    maxItems: 1
+
+  standby-gpios:
+    description:
+      Reference to the GPIO connected to the OE pin, if any. When low
+      the device will respond to power status requests with "standby"
+      if in auto mode.
+    maxItems: 1
+
+  # see ../cec.txt
+  hdmi-phandle:
+    description: phandle to the HDMI controller
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ch7322@75 {
+        compatible = "chrontel,ch7322";
+        reg = <0x75>;
+        interrupts = <47 IRQ_TYPE_EDGE_RISING>;
+        standby-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+        reset-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+        hdmi-phandle = <&hdmi>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt
deleted file mode 100644
index b88dcdd41def..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-Dongwoon Anatech DW9714 camera voice coil lens driver
-
-DW9174 is a 10-bit DAC with current sink capability. It is intended
-for driving voice coil lenses in camera modules.
-
-Mandatory properties:
-
-- compatible: "dongwoon,dw9714"
-- reg: I²C slave address
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
new file mode 100644
index 000000000000..66229a3dc05d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9714 camera voice coil lens driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  DW9174 is a 10-bit DAC with current sink capability. It is intended for
+  driving voice coil lenses in camera modules.
+
+properties:
+  compatible:
+    const: dongwoon,dw9714
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description:
+      XSD pin for shutdown (active low)
+
+  vcc-supply:
+    description: VDD power supply
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-lens@c {
+            compatible = "dongwoon,dw9714";
+            reg = <0x0c>;
+            vcc-supply = <&reg_csi_1v8>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
new file mode 100644
index 000000000000..21864ab86ec4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9768.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9768 Voice Coil Motor (VCM) Lens Device Tree Bindings
+
+maintainers:
+  - Dongchun Zhu <dongchun.zhu@mediatek.com>
+
+description: |-
+  The Dongwoon DW9768 is a single 10-bit digital-to-analog (DAC) converter
+  with 100 mA output current sink capability. VCM current is controlled with
+  a linear mode driver. The DAC is controlled via a 2-wire (I2C-compatible)
+  serial interface that operates at clock rates up to 1MHz. This chip
+  integrates Advanced Actuator Control (AAC) technology and is intended for
+  driving voice coil lenses in camera modules.
+
+properties:
+  compatible:
+    enum:
+      - dongwoon,dw9768 # for DW9768 VCM
+      - giantec,gt9769  # for GT9769 VCM
+
+  reg:
+    maxItems: 1
+
+  vin-supply:
+    description:
+      Definition of the regulator used as Digital I/O voltage supply.
+
+  vdd-supply:
+    description:
+      Definition of the regulator used as Digital core voltage supply.
+
+  dongwoon,aac-mode:
+    description:
+      Indication of AAC mode select.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum:
+      - 1    #  AAC2 mode(operation time# 0.48 x Tvib)
+      - 2    #  AAC3 mode(operation time# 0.70 x Tvib)
+      - 3    #  AAC4 mode(operation time# 0.75 x Tvib)
+      - 5    #  AAC8 mode(operation time# 1.13 x Tvib)
+    default: 2
+
+  dongwoon,aac-timing:
+    description:
+      Number of AAC Timing count that controlled by one 6-bit period of
+      vibration register AACT[5:0], the unit of which is 100 us.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    default: 0x20
+    minimum: 0x00
+    maximum: 0x3f
+
+  dongwoon,clock-presc:
+    description:
+      Indication of VCM internal clock dividing rate select, as one multiple
+      factor to calculate VCM ring periodic time Tvib.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum:
+      - 0    #  Dividing Rate -  2
+      - 1    #  Dividing Rate -  1
+      - 2    #  Dividing Rate -  1/2
+      - 3    #  Dividing Rate -  1/4
+      - 4    #  Dividing Rate -  8
+      - 5    #  Dividing Rate -  4
+    default: 1
+
+required:
+  - compatible
+  - reg
+  - vin-supply
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dw9768: camera-lens@c {
+            compatible = "dongwoon,dw9768";
+            reg = <0x0c>;
+
+            vin-supply = <&mt6358_vcamio_reg>;
+            vdd-supply = <&mt6358_vcama2_reg>;
+            dongwoon,aac-timing = <0x39>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
deleted file mode 100644
index c4701f1eaaf6..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-Dongwoon Anatech DW9807 voice coil lens driver
-
-DW9807 is a 10-bit DAC with current sink capability. It is intended for
-controlling voice coil lenses.
-
-Mandatory properties:
-
-- compatible: "dongwoon,dw9807-vcm"
-- reg: I2C slave address
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
new file mode 100644
index 000000000000..aae246ca3fcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2018, 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9807-vcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9807 voice coil lens driver
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+description: |
+  DW9807 is a 10-bit DAC with current sink capability. It is intended for
+  controlling voice coil lenses.
+
+properties:
+  compatible:
+    const: dongwoon,dw9807-vcm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lens@e {
+            compatible = "dongwoon,dw9807-vcm";
+            reg = <0x0e>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
new file mode 100644
index 000000000000..1e2df8cf2937
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@puri.sm>
+
+description: |-
+  The Hi-846 is a raw image sensor with an MIPI CSI-2 image data
+  interface and CCI (I2C compatible) control bus. The output format
+  is raw Bayer.
+
+properties:
+  compatible:
+    const: hynix,hi846
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Reference to the mclk clock.
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the RESETB pin. Active low.
+    maxItems: 1
+
+  shutdown-gpios:
+    description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low.
+    maxItems: 1
+
+  vddio-supply:
+    description: Definition of the regulator used for the VDDIO power supply.
+
+  vdda-supply:
+    description: Definition of the regulator used for the VDDA power supply.
+
+  vddd-supply:
+    description: Definition of the regulator used for the VDDD power supply.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - assigned-clocks
+  - assigned-clock-rates
+  - vddio-supply
+  - vdda-supply
+  - vddd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hi846: camera@20 {
+            compatible = "hynix,hi846";
+            reg = <0x20>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_csi1>;
+            clocks = <&clk 0>;
+            assigned-clocks = <&clk 0>;
+            assigned-clock-rates = <25000000>;
+            vdda-supply = <&reg_camera_vdda>;
+            vddd-supply = <&reg_camera_vddd>;
+            vddio-supply = <&reg_camera_vddio>;
+            reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+            shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+
+            port {
+                camera_out: endpoint {
+                    remote-endpoint = <&csi1_ep1>;
+                    link-frequencies = /bits/ 64
+                        <80000000 200000000>;
+                    data-lanes = <1 2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
new file mode 100644
index 000000000000..e57575c44930
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright (C) 2019 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imi,rdacm2x-gmsl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms
+
+maintainers:
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+  - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+
+description: -|
+  The IMI D&D RDACM20 and RDACM21 are GMSL-compatible camera designed for
+  automotive applications.
+
+  The RDACM20 camera module encloses a Maxim Integrated MAX9271 GMSL serializer,
+  coupled with an OV10635 image sensor and an embedded MCU. Both the MCU and
+  the image sensor are connected to the serializer local I2C bus and are
+  accessible by the host SoC by direct addressing.
+
+  The RDACM21 camera module encloses the same serializer, coupled with an
+  OV10640 image sensor and an OV490 ISP. Only the OV490 ISP is interfaced to
+  the serializer local I2C bus while the image sensor is not accessible from
+  the host SoC.
+
+  They both connect to a remote GMSL endpoint through a coaxial cable.
+
+                                                   IMI RDACM20
+  +---------------+                        +--------------------------------+
+  |      GMSL     |   <- Video Stream      |       <- Video--------\        |
+  |               |< === GMSL Link ====== >|MAX9271<- I2C bus-> <-->OV10635 |
+  | de-serializer |   <- I2C messages ->   |                   \<-->MCU     |
+  +---------------+                        +--------------------------------+
+
+                                                   IMI RDACM21
+  +---------------+                        +--------------------------------+
+  |      GMSL     |   <- Video Stream      |       <- Video--------\        |
+  |               |< === GMSL Link ====== >|MAX9271<- I2C bus-> <-->OV490   |
+  |               |   <- I2C messages ->   |                          |     |
+  | de-serializer |                        |          OV10640 <-------|     |
+  +---------------+                        +--------------------------------+
+
+  Both camera modules serialize video data generated by the embedded camera
+  sensor on the GMSL serial channel to a remote GMSL de-serializer. They also
+  receive and transmit I2C messages encapsulated and transmitted on the GMSL
+  bidirectional control channel.
+
+  All I2C traffic received on the GMSL link not directed to the serializer is
+  propagated on the local I2C bus to the remote device there connected. All the
+  I2C traffic generated on the local I2C bus not directed to the serializer is
+  propagated to the remote de-serializer encapsulated in the GMSL control
+  channel.
+
+  The RDACM20 and RDACM21 DT node should be a direct child of the GMSL
+  deserializer's I2C bus corresponding to the GMSL link that the camera is
+  attached to.
+
+properties:
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  compatible:
+    enum:
+      - imi,rdacm20
+      - imi,rdacm21
+
+  reg:
+    description: -|
+      I2C device addresses, the first to be assigned to the serializer, the
+      following ones to be assigned to the remote devices.
+
+      For RDACM20 the second entry of the property is assigned to the
+      OV10635 image sensor and the optional third one to the embedded MCU.
+
+      For RDACM21 the second entry is assigned to the OV490 ISP and the optional
+      third one ignored.
+
+    minItems: 2
+    maxItems: 3
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Connection to the remote GMSL endpoint.
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@e66d8000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      reg = <0 0xe66d8000>;
+
+      camera@31 {
+        compatible = "imi,rdacm20";
+        reg = <0x31>, <0x41>, <0x51>;
+
+        port {
+          rdacm20_out0: endpoint {
+            remote-endpoint = <&max9286_in0>;
+          };
+        };
+      };
+    };
+
+  - |
+    i2c@e66d8000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      reg = <0 0xe66d8000>;
+
+      camera@31 {
+        compatible = "imi,rdacm21";
+        reg = <0x31>, <0x41>;
+
+        port {
+          rdacm21_out0: endpoint {
+            remote-endpoint = <&max9286_in0>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
new file mode 100644
index 000000000000..5fc96944b448
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
+
+maintainers:
+  - Dave Stevenson <dave.stevenson@raspberrypi.com>
+
+description: |-
+  The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
+  with an active array size of 3280H x 2464V. It is programmable through
+  I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
+  Image data is sent through MIPI CSI-2, which is configured as either 2 or
+  4 data lanes.
+
+properties:
+  compatible:
+    const: sony,imx219
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  VDIG-supply:
+    description:
+      Digital I/O voltage supply, 1.8 volts
+
+  VANA-supply:
+    description:
+      Analog voltage supply, 2.8 volts
+
+  VDDL-supply:
+    description:
+      Digital core voltage supply, 1.2 volts
+
+  reset-gpios:
+    maxItems: 1
+    description: |-
+      Reference to the GPIO connected to the xclr pin, if any.
+      Must be released (set high) after all supplies are applied.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            description: |-
+              The sensor supports either two-lane, or four-lane operation.
+              If this property is omitted four-lane operation is assumed.
+              For two-lane operation the property must be set to <1 2>.
+            items:
+              - const: 1
+              - const: 2
+
+          clock-noncontinuous: true
+          link-frequencies: true
+
+        required:
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - VANA-supply
+  - VDIG-supply
+  - VDDL-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx219: sensor@10 {
+            compatible = "sony,imx219";
+            reg = <0x10>;
+            clocks = <&imx219_clk>;
+            VANA-supply = <&imx219_vana>;   /* 2.8v */
+            VDIG-supply = <&imx219_vdig>;   /* 1.8v */
+            VDDL-supply = <&imx219_vddl>;   /* 1.2v */
+
+            port {
+                imx219_0: endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2>;
+                    clock-noncontinuous;
+                    link-frequencies = /bits/ 64 <456000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/imx258.yaml b/Documentation/devicetree/bindings/media/i2c/imx258.yaml
new file mode 100644
index 000000000000..cde0f7383b2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx258.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx258.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX258 13 Mpixel CMOS Digital Image Sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |-
+  IMX258 is a diagonal 5.867mm (Type 1/3.06) 13 Mega-pixel CMOS active pixel
+  type stacked image sensor with a square pixel array of size 4208 x 3120. It
+  is programmable through I2C interface.  Image data is sent through MIPI
+  CSI-2.
+
+properties:
+  compatible:
+    const: sony,imx258
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    description:
+      Clock frequency from 6 to 27 MHz.
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description: |-
+      Reference to the GPIO connected to the XCLR pin, if any.
+
+  vana-supply:
+    description:
+      Analog voltage (VANA) supply, 2.7 V
+
+  vdig-supply:
+    description:
+      Digital I/O voltage (VDIG) supply, 1.2 V
+
+  vif-supply:
+    description:
+      Interface voltage (VIF) supply, 1.8 V
+
+  # See ../video-interfaces.txt for more details
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@6c {
+            compatible = "sony,imx258";
+            reg = <0x6c>;
+            clocks = <&imx258_clk>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <320000000>;
+                };
+            };
+        };
+    };
+
+    /* Oscillator on the camera board */
+    imx258_clk: clk {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <19200000>;
+    };
+
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@6c {
+            compatible = "sony,imx258";
+            reg = <0x6c>;
+            clocks = <&imx258_clk>;
+
+            assigned-clocks = <&imx258_clk>;
+            assigned-clock-rates = <19200000>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <633600000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt
deleted file mode 100644
index 80f2e89568e1..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/imx274.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor
-
-The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with
-an active array size of 3864H x 2202V. It is programmable through I2C
-interface. The I2C address is fixed to 0x1a as per sensor data sheet.
-Image data is sent through MIPI CSI-2, which is configured as 4 lanes
-at 1440 Mbps.
-
-
-Required Properties:
-- compatible: value should be "sony,imx274" for imx274 sensor
-- reg: I2C bus address of the device
-
-Optional Properties:
-- reset-gpios: Sensor reset GPIO
-
-The imx274 device node should contain one 'port' child node with
-an 'endpoint' subnode. For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-	sensor@1a {
-		compatible = "sony,imx274";
-		reg = <0x1a>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reset-gpios = <&gpio_sensor 0 0>;
-		port {
-			sensor_out: endpoint {
-				remote-endpoint = <&csiss_in>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
new file mode 100644
index 000000000000..034a6e3466af
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/isil,isl79987.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL79987 Analog to MIPI CSI-2 decoder
+
+maintainers:
+  - Michael Tretter <m.tretter@pengutronix.de>
+  - Marek Vasut <marex@denx.de>
+
+description:
+  The Intersil ISL79987 is an analog to MIPI CSI-2 decoder which is capable of
+  receiving up to four analog stream and multiplexing them into up to four MIPI
+  CSI-2 virtual channels, using one MIPI clock lane and 1/2 data lanes.
+
+properties:
+  compatible:
+    enum:
+      - isil,isl79987
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      A GPIO spec for the RSTB pin (active high)
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      A GPIO spec for the Power Down pin (active high)
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 2
+
+            required:
+              - data-lanes
+
+    patternProperties:
+      "^port@[1-4]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input ports
+
+    required:
+      - port@0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ports
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      isl7998x_mipi@44 {
+        compatible = "isil,isl79987";
+        reg = <0x44>;
+        powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            isl79987_out: endpoint {
+              remote-endpoint = <&mipi_csi2_in>;
+              data-lanes = <1 2>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            endpoint {
+              remote-endpoint = <&camera_0>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+            endpoint {
+              remote-endpoint = <&camera_1>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
new file mode 100644
index 000000000000..90315e217003
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -0,0 +1,378 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max9286.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated Quad GMSL Deserializer
+
+maintainers:
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+  - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+
+description: |
+  The MAX9286 deserializer receives video data on up to 4 Gigabit Multimedia
+  Serial Links (GMSL) and outputs them on a CSI-2 D-PHY port using up to 4 data
+  lanes.
+
+  In addition to video data, the GMSL links carry a bidirectional control
+  channel that encapsulates I2C messages. The MAX9286 forwards all I2C traffic
+  not addressed to itself to the other side of the links, where a GMSL
+  serializer will output it on a local I2C bus. In the other direction all I2C
+  traffic received over GMSL by the MAX9286 is output on the local I2C bus.
+
+properties:
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  compatible:
+    const: maxim,max9286
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  poc-supply:
+    description: Regulator providing Power over Coax to the cameras
+
+  enable-gpios:
+    description: GPIO connected to the \#PWDN pin with inverted polarity
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  maxim,reverse-channel-microvolt:
+    minimum: 30000
+    maximum: 200000
+    default: 170000
+    description: |
+      Initial amplitude of the reverse control channel, in micro volts.
+
+      The initial amplitude shall be adjusted to a value compatible with the
+      configuration of the connected remote serializer.
+
+      Some camera modules (for example RDACM20) include an on-board MCU that
+      pre-programs the embedded serializer with power supply noise immunity
+      (high-threshold) enabled. A typical value of the deserializer's reverse
+      channel amplitude to communicate with pre-programmed serializers is
+      170000 micro volts.
+
+      A typical value for the reverse channel amplitude to communicate with
+      a remote serializer whose high-threshold noise immunity is not enabled
+      is 100000 micro volts
+
+  maxim,gpio-poc:
+    $ref: '/schemas/types.yaml#/definitions/uint32-array'
+    minItems: 2
+    maxItems: 2
+    description: |
+      Index of the MAX9286 gpio output line (0 or 1) that controls Power over
+      Coax to the cameras and its associated polarity flag.
+
+      The property accepts an array of two unsigned integers, the first being
+      the gpio line index (0 or 1) and the second being the gpio line polarity
+      flag (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW) as defined in
+      <include/dt-bindings/gpio/gpio.h>.
+
+      When the remote cameras power is controlled by one of the MAX9286 gpio
+      lines, this property has to be used to specify which line among the two
+      available ones controls the remote camera power enablement.
+
+      When this property is used it is not possible to register a gpio
+      controller as the gpio lines are controlled directly by the MAX9286 and
+      not available for consumers, nor the 'poc-supply' property should be
+      specified.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 2
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 3
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes: true
+
+            required:
+              - data-lanes
+
+    required:
+      - port@4
+
+  i2c-mux:
+    type: object
+    $ref: /schemas/i2c/i2c-mux.yaml#
+    unevaluatedProperties: false
+    description: |
+      Each GMSL link is modelled as a child bus of an i2c bus multiplexer/switch.
+
+    patternProperties:
+      "^i2c@[0-3]$":
+        type: object
+        description: |
+          Child node of the i2c bus multiplexer which represents a GMSL link.
+          Each serializer device on the GMSL link remote end is represented with
+          an i2c-mux child node. The MAX9286 chip supports up to 4 GMSL
+          channels.
+
+        properties:
+          reg:
+            description: The index of the GMSL channel.
+            maxItems: 1
+
+        patternProperties:
+          "^camera@[a-f0-9]+$":
+            type: object
+            description: |
+              The remote camera device, composed by a GMSL serializer and a
+              connected video source.
+
+            properties:
+              compatible:
+                description: The remote device compatible string.
+
+              reg:
+                minItems: 2
+                maxItems: 3
+                description: |
+                  The I2C addresses to be assigned to the remote devices through
+                  address reprogramming. The number of entries depends on the
+                  requirements of the currently connected remote device.
+
+              port:
+                $ref: /schemas/graph.yaml#/properties/port
+                description: Connection to the MAX9286 sink.
+
+            required:
+              - compatible
+              - reg
+              - port
+
+            additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ports
+  - i2c-mux
+
+# If 'maxim,gpio-poc' is present, then 'poc-supply' and 'gpio-controller'
+# are not allowed.
+if:
+  required:
+    - maxim,gpio-poc
+then:
+  properties:
+    poc-supply: false
+    gpio-controller: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c@e66d8000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        reg = <0 0xe66d8000>;
+
+        gmsl-deserializer@2c {
+            compatible = "maxim,max9286";
+            reg = <0x2c>;
+            poc-supply = <&camera_poc_12v>;
+            enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            maxim,reverse-channel-microvolt = <170000>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    max9286_in0: endpoint {
+                        remote-endpoint = <&rdacm20_out0>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    max9286_in1: endpoint {
+                        remote-endpoint = <&rdacm20_out1>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    max9286_in2: endpoint {
+                        remote-endpoint = <&rdacm20_out2>;
+                    };
+                };
+
+                port@3 {
+                    reg = <3>;
+
+                    max9286_in3: endpoint {
+                        remote-endpoint = <&rdacm20_out3>;
+                    };
+                };
+
+                port@4 {
+                    reg = <4>;
+
+                    max9286_out: endpoint {
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csi40_in>;
+                    };
+                };
+            };
+
+            i2c-mux {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                i2c@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
+
+                    camera@51 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x51>, <0x61>;
+
+                        port {
+                            rdacm20_out0: endpoint {
+                                remote-endpoint = <&max9286_in0>;
+                            };
+                        };
+
+                    };
+                };
+
+                i2c@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+
+                    camera@52 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x52>, <0x62>;
+
+                        port {
+                            rdacm20_out1: endpoint {
+                                remote-endpoint = <&max9286_in1>;
+                            };
+                        };
+                    };
+                };
+
+                i2c@2 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <2>;
+
+                    camera@53 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x53>, <0x63>;
+
+                        port {
+                            rdacm20_out2: endpoint {
+                                remote-endpoint = <&max9286_in2>;
+                            };
+                        };
+                    };
+                };
+
+                i2c@3 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <3>;
+
+                    camera@54 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x54>, <0x64>;
+
+                        port {
+                            rdacm20_out3: endpoint {
+                                remote-endpoint = <&max9286_in3>;
+                            };
+                        };
+                    };
+                };
+            };
+        };
+
+        /*
+        * Example of a deserializer that controls the camera Power over Coax
+        * through one of its gpio lines.
+        */
+        gmsl-deserializer@6c {
+            compatible = "maxim,max9286";
+            reg = <0x6c>;
+            enable-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+
+            /*
+            * The remote camera power is controlled by MAX9286 GPIO line #0.
+            * No 'poc-supply' nor 'gpio-controller' are specified.
+            */
+            maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+
+            /*
+            * Do not describe connections as they're the same as in the previous
+            * example.
+            */
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@4 {
+                    reg = <4>;
+                };
+            };
+
+            i2c-mux {
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
new file mode 100644
index 000000000000..444f24838d3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96712.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Quad GMSL2 to CSI-2 Deserializer with GMSL1 Compatibility
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+
+description: |
+  The MAX96712 deserializer converts GMSL2 or GMSL1 serial inputs into MIPI
+  CSI-2 D-PHY or C-PHY formatted outputs. The device allows each link to
+  simultaneously transmit bidirectional control-channel data while forward
+  video transmissions are in progress. The MAX96712 can accommodate as many as
+  four remotely located sensors using industry-standard coax or STP
+  interconnects.
+
+  Each GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
+  forward direction and 187.5Mbps in the reverse direction. In GMSL1 mode, the
+  MAX96712 can be paired with first-generation 3.12Gbps or 1.5Gbps GMSL1
+  serializers or operate up to 3.12Gbps with GMSL2 serializers in GMSL1 mode.
+
+properties:
+  compatible:
+    const: maxim,max96712
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  enable-gpios: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 2
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 3
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes: true
+
+            required:
+              - data-lanes
+
+    required:
+      - port@4
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c@e6508000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reg = <0 0xe6508000>;
+
+            gmsl0: gmsl-deserializer@49 {
+                    compatible = "maxim,max96712";
+                    reg = <0x49>;
+                    enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@4 {
+                                    reg = <4>;
+                                    max96712_out0: endpoint {
+                                            clock-lanes = <0>;
+                                            data-lanes = <1 2 3 4>;
+                                            remote-endpoint = <&csi40_in>;
+                                    };
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
new file mode 100644
index 000000000000..39395ea8c318
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2014--2020 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/mipi-ccs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI CCS, SMIA++ and SMIA compliant camera sensors
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+description:
+
+  CCS (Camera Command Set) is a raw Bayer camera sensor standard defined by the
+  MIPI Alliance; see
+  <URL:https://www.mipi.org/specifications/camera-command-set>.
+
+  SMIA (Standard Mobile Imaging Architecture) is an image sensor standard
+  defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension of
+  that.
+
+  More detailed documentation can be found in
+  Documentation/devicetree/bindings/media/video-interfaces.txt .
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mipi-ccs-1.1
+          - const: mipi-ccs
+      - items:
+          - const: mipi-ccs-1.0
+          - const: mipi-ccs
+      - const: nokia,smia
+
+  reg:
+    maxItems: 1
+
+  vana-supply:
+    description: Analogue voltage supply (VANA), sensor dependent.
+
+  vcore-supply:
+    description: Core voltage supply (VCore), sensor dependent.
+
+  vio-supply:
+    description: I/O voltage supply (VIO), sensor dependent.
+
+  clocks:
+    description: External clock to the sensor.
+    maxItems: 1
+
+  clock-frequency:
+    description: Frequency of the external clock to the sensor in Hz.
+
+  reset-gpios:
+    description: Reset GPIO. Also commonly called XSHUTDOWN in hardware
+      documentation.
+    maxItems: 1
+
+  flash-leds:
+    description: Flash LED phandles. See ../video-interfaces.txt for details.
+
+  lens-focus:
+    description: Lens focus controller phandles. See ../video-interfaces.txt
+      for details.
+
+  rotation:
+    description: Rotation of the sensor.  See ../video-interfaces.txt for
+      details.
+    enum: [ 0, 180 ]
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+          data-lanes: true
+          bus-type:
+            enum:
+              - 1 # CSI-2 C-PHY
+              - 3 # CCP2
+              - 4 # CSI-2 D-PHY
+
+        required:
+          - link-frequencies
+          - data-lanes
+          - bus-type
+
+required:
+  - compatible
+  - reg
+  - clock-frequency
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c2 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-frequency = <400000>;
+
+        camera-sensor@10 {
+            compatible = "mipi-ccs-1.0", "mipi-ccs";
+            reg = <0x10>;
+            reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+            vana-supply = <&vaux3>;
+            clocks = <&omap3_isp 0>;
+            clock-frequency = <9600000>;
+            port {
+                ccs_ep: endpoint {
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&csi2a_ep>;
+                    link-frequencies = /bits/ 64 <199200000 210000000
+                                                  499200000>;
+                    bus-type = <4>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
deleted file mode 100644
index cb60443ff78f..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
-
-The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with
-an active array size of 2592H x 1944V. It is programmable through a simple
-two-wire serial interface.
-
-Required Properties:
-- compatible: value should be either one among the following
-	(a) "aptina,mt9p031" for mt9p031 sensor
-	(b) "aptina,mt9p031m" for mt9p031m sensor
-
-- input-clock-frequency: Input clock frequency.
-
-- pixel-clock-frequency: Pixel clock frequency.
-
-Optional Properties:
-- reset-gpios: Chip reset GPIO
-
-For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	i2c0@1c22000 {
-		...
-		...
-		mt9p031@5d {
-			compatible = "aptina,mt9p031";
-			reg = <0x5d>;
-			reset-gpios = <&gpio3 30 0>;
-
-			port {
-				mt9p031_1: endpoint {
-					input-clock-frequency = <6000000>;
-					pixel-clock-frequency = <96000000>;
-				};
-			};
-		};
-		...
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
deleted file mode 100644
index 10ece8108081..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-SMIA/SMIA++ sensor
-
-SMIA (Standard Mobile Imaging Architecture) is an image sensor standard
-defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension
-of that. These definitions are valid for both types of sensors.
-
-More detailed documentation can be found in
-Documentation/devicetree/bindings/media/video-interfaces.txt .
-
-The device node should contain a "port" node which may contain one or more
-endpoint nodes, in accordance with video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt .
-
-Mandatory properties
---------------------
-
-- compatible: "nokia,smia"
-- reg: I2C address (0x10, or an alternative address)
-- vana-supply: Analogue voltage supply (VANA), typically 2,8 volts (sensor
-  dependent).
-- clocks: External clock to the sensor
-- clock-frequency: Frequency of the external clock to the sensor
-- link-frequencies: List of allowed data link frequencies. An array of
-  64-bit elements.
-
-
-Optional properties
--------------------
-
-- reset-gpios: XSHUTDOWN GPIO
-- flash-leds: See ../video-interfaces.txt
-- lens-focus: See ../video-interfaces.txt
-- rotation: Integer property; valid values are 0 (sensor mounted upright)
-	    and 180 (sensor mounted upside down). See
-	    ../video-interfaces.txt .
-
-
-Endpoint node mandatory properties
-----------------------------------
-
-- data-lanes: <1..n>
-
-
-Example
--------
-
-&i2c2 {
-	clock-frequency = <400000>;
-
-	camera-sensor@10 {
-		compatible = "nokia,smia";
-		reg = <0x10>;
-		reset-gpios = <&gpio3 20 0>;
-		vana-supply = <&vaux3>;
-		clocks = <&omap3_isp 0>;
-		clock-frequency = <9600000>;
-		nokia,nvm-size = <512>; /* 8 * 64 */
-		link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
-		port {
-			smiapp_ep: endpoint {
-				data-lanes = <1 2>;
-				remote-endpoint = <&csi2a_ep>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml
new file mode 100644
index 000000000000..b617cc5c6a9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/onnn,ar0521.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor AR0521 MIPI CSI-2 sensor
+
+maintainers:
+  - Krzysztof Hałasa <khalasa@piap.pl>
+
+description: |-
+  The AR0521 is a raw CMOS image sensor with MIPI CSI-2 and
+  I2C-compatible control interface.
+
+properties:
+  compatible:
+    const: onnn,ar0521
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: extclk
+
+  vaa-supply:
+    description:
+      Definition of the regulator used as analog (2.7 V) voltage supply.
+
+  vdd-supply:
+    description:
+      Definition of the regulator used as digital core (1.2 V) voltage supply.
+
+  vdd_io-supply:
+    description:
+      Definition of the regulator used as digital I/O (1.8 V) voltage supply.
+
+  reset-gpios:
+    description: reset GPIO, usually active low
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            const: 4
+          data-lanes:
+            anyOf:
+              - items:
+                  - const: 1
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vaa-supply
+  - vdd-supply
+  - vdd_io-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ar0521: camera-sensor@36 {
+                    compatible = "onnn,ar0521";
+                    reg = <0x36>;
+                    pinctrl-names = "default";
+                    pinctrl-0 = <&pinctrl_mipi_camera>;
+                    clocks = <&clks IMX6QDL_CLK_CKO>;
+                    clock-names = "extclk";
+                    reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+                    vaa-supply = <&reg_2p7v>;
+                    vdd-supply = <&reg_1p2v>;
+                    vdd_io-supply = <&reg_1p8v>;
+
+                    port {
+                           mipi_camera_to_mipi_csi2: endpoint {
+                                    remote-endpoint = <&mipi_csi2_in>;
+                                    data-lanes = <1 2 3 4>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.txt b/Documentation/devicetree/bindings/media/i2c/ov2680.txt
deleted file mode 100644
index 11e925ed9dad..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov2680.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Omnivision OV2680 MIPI CSI-2 sensor
-
-Required Properties:
-- compatible: should be "ovti,ov2680".
-- clocks: reference to the xvclk input clock.
-- clock-names: should be "xvclk".
-- DOVDD-supply: Digital I/O voltage supply.
-- DVDD-supply: Digital core voltage supply.
-- AVDD-supply: Analog voltage supply.
-
-Optional Properties:
-- reset-gpios: reference to the GPIO connected to the powerdown/reset pin,
-               if any. This is an active low signal to the OV2680.
-
-The device node must contain one 'port' child node for its digital output
-video port, and this port must have a single endpoint in accordance with
- the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Endpoint node required properties for CSI-2 connection are:
-- remote-endpoint: a phandle to the bus receiver's endpoint node.
-- clock-lanes: should be set to <0> (clock lane on hardware lane 0).
-- data-lanes: should be set to <1> (one CSI-2 lane supported).
-
-Example:
-
-&i2c2 {
-	ov2680: camera-sensor@36 {
-		compatible = "ovti,ov2680";
-		reg = <0x36>;
-		clocks = <&osc>;
-		clock-names = "xvclk";
-		reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		DOVDD-supply = <&sw2_reg>;
-		DVDD-supply = <&sw2_reg>;
-		AVDD-supply = <&reg_peri_3p15v>;
-
-		port {
-			ov2680_to_mipi: endpoint {
-				remote-endpoint = <&mipi_from_sensor>;
-				clock-lanes = <0>;
-				data-lanes = <1>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.txt b/Documentation/devicetree/bindings/media/i2c/ov5640.txt
deleted file mode 100644
index c97c2f2da12d..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov5640.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-* Omnivision OV5640 MIPI CSI-2 / parallel sensor
-
-Required Properties:
-- compatible: should be "ovti,ov5640"
-- clocks: reference to the xclk input clock.
-- clock-names: should be "xclk".
-- DOVDD-supply: Digital I/O voltage supply, 1.8 volts
-- AVDD-supply: Analog voltage supply, 2.8 volts
-- DVDD-supply: Digital core voltage supply, 1.5 volts
-
-Optional Properties:
-- reset-gpios: reference to the GPIO connected to the reset pin, if any.
-	       This is an active low signal to the OV5640.
-- powerdown-gpios: reference to the GPIO connected to the powerdown pin,
-		   if any. This is an active high signal to the OV5640.
-- rotation: as defined in
-	    Documentation/devicetree/bindings/media/video-interfaces.txt,
-	    valid values are 0 (sensor mounted upright) and 180 (sensor
-	    mounted upside down).
-
-The device node must contain one 'port' child node for its digital output
-video port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-OV5640 can be connected to a MIPI CSI-2 bus or a parallel bus endpoint.
-
-Endpoint node required properties for CSI-2 connection are:
-- remote-endpoint: a phandle to the bus receiver's endpoint node.
-- clock-lanes: should be set to <0> (clock lane on hardware lane 0)
-- data-lanes: should be set to <1> or <1 2> (one or two CSI-2 lanes supported)
-
-Endpoint node required properties for parallel connection are:
-- remote-endpoint: a phandle to the bus receiver's endpoint node.
-- bus-width: shall be set to <8> for 8 bits parallel bus
-	     or <10> for 10 bits parallel bus
-- data-shift: shall be set to <2> for 8 bits parallel bus
-	      (lines 9:2 are used) or <0> for 10 bits parallel bus
-- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
-- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
-- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
-	       signal.
-
-Examples:
-
-&i2c1 {
-	ov5640: camera@3c {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xclk";
-		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
-		AVDD-supply = <&vgen3_reg>;  /* 2.8v */
-		DVDD-supply = <&vgen2_reg>;  /* 1.5v */
-		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-		rotation = <180>;
-
-		port {
-			/* MIPI CSI-2 bus endpoint */
-			ov5640_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_from_ov5640>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-};
-
-&i2c1 {
-	ov5640: camera@3c {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
-		clocks = <&clk_ext_camera>;
-		clock-names = "xclk";
-
-		port {
-			/* Parallel bus endpoint */
-			ov5640_to_parallel: endpoint {
-				remote-endpoint = <&parallel_from_ov5640>;
-				bus-width = <8>;
-				data-shift = <2>; /* lines 9:2 are used */
-				hsync-active = <0>;
-				vsync-active = <0>;
-				pclk-sample = <1>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
deleted file mode 100644
index 22e44945b661..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov5647.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Omnivision OV5647 raw image sensor
----------------------------------
-
-OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
-and CCI (I2C compatible) control bus.
-
-Required properties:
-
-- compatible		: "ovti,ov5647".
-- reg			: I2C slave address of the sensor.
-- clocks		: Reference to the xclk clock.
-
-The common video interfaces bindings (see video-interfaces.txt) should be
-used to specify link to the image data receiver. The OV5647 device
-node should contain one 'port' child node with an 'endpoint' subnode.
-
-Endpoint node mandatory properties:
-
-- remote-endpoint: A phandle to the bus receiver's endpoint node.
-
-Example:
-
-	i2c@2000 {
-		...
-		ov: camera@36 {
-			compatible = "ovti,ov5647";
-			reg = <0x36>;
-			clocks = <&camera_clk>;
-			port {
-				camera_1: endpoint {
-					remote-endpoint = <&csi1_ep1>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.txt b/Documentation/devicetree/bindings/media/i2c/ov772x.txt
deleted file mode 100644
index 0b3ede5b8e6a..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov772x.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Omnivision OV7720/OV7725 CMOS sensor
-
-The Omnivision OV7720/OV7725 sensor supports multiple resolutions output,
-such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can
-support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats.
-
-Required Properties:
-- compatible: shall be one of
-	"ovti,ov7720"
-	"ovti,ov7725"
-- clocks: reference to the xclk input clock.
-
-Optional Properties:
-- reset-gpios: reference to the GPIO connected to the RSTB pin which is
-  active low, if any.
-- powerdown-gpios: reference to the GPIO connected to the PWDN pin which is
-  active high, if any.
-
-The device node shall contain one 'port' child node with one child 'endpoint'
-subnode for its digital output video port, in accordance with the video
-interface bindings defined in Documentation/devicetree/bindings/media/
-video-interfaces.txt.
-
-Example:
-
-&i2c0 {
-	ov772x: camera@21 {
-		compatible = "ovti,ov7725";
-		reg = <0x21>;
-		reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>;
-		powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>;
-		clocks = <&xclk>;
-
-		port {
-			ov772x_0: endpoint {
-				remote-endpoint = <&vcap1_in0>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
new file mode 100644
index 000000000000..baf92aaaf049
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2019 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
+
+maintainers:
+  - Dongchun Zhu <dongchun.zhu@mediatek.com>
+
+description: |-
+  The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
+  image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface. This chip is programmable
+  through I2C and two-wire SCCB. The sensor output is available via CSI-2
+  serial data output (up to 4-lane).
+
+properties:
+  compatible:
+    const: ovti,ov8856
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      Input clock for the sensor.
+    items:
+      - const: xvclk
+
+  clock-frequency:
+    description:
+      Frequency of the xvclk clock in Hertz.
+
+  dovdd-supply:
+    description:
+      Definition of the regulator used as interface power supply.
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+  dvdd-supply:
+    description:
+      Definition of the regulator used as digital power supply.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDOWN which is physically
+      active low.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            description: |-
+              The driver only supports four-lane operation.
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+          link-frequencies:
+            description: Frequencies listed are driver, not h/w limitations.
+            maxItems: 2
+            items:
+              enum: [ 360000000, 180000000 ]
+
+        required:
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-frequency
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov8856: camera@10 {
+            compatible = "ovti,ov8856";
+            reg = <0x10>;
+
+            reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clk_24m_cam>;
+
+            clocks = <&cam_osc>;
+            clock-names = "xvclk";
+            clock-frequency = <19200000>;
+
+            avdd-supply = <&mt6358_vcama2_reg>;
+            dvdd-supply = <&mt6358_vcamd_reg>;
+            dovdd-supply = <&mt6358_vcamio_reg>;
+
+            port {
+                wcam_out: endpoint {
+                    remote-endpoint = <&mipi_in_wcam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <360000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
new file mode 100644
index 000000000000..63a040944f3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov02a10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV02A10 CMOS Sensor Device Tree Bindings
+
+maintainers:
+  - Dongchun Zhu <dongchun.zhu@mediatek.com>
+
+description: |-
+  The Omnivision OV02A10 is a low-cost, high performance, 1/5-inch, 2 megapixel
+  image sensor, which is the latest production derived from Omnivision's CMOS
+  image sensor technology. Ihis chip supports high frame rate speeds up to 30fps
+  @ 1600x1200 (UXGA) resolution transferred over a 1-lane MIPI interface. The
+  sensor output is available via CSI-2 serial data output.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov02a10
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      External clock for the sensor.
+    items:
+      - const: eclk
+
+  clock-frequency:
+    description:
+      Frequency of the eclk clock in Hz.
+
+  dovdd-supply:
+    description:
+      Definition of the regulator used as Digital I/O voltage supply.
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as Analog voltage supply.
+
+  dvdd-supply:
+    description:
+      Definition of the regulator used as Digital core voltage supply.
+
+  powerdown-gpios:
+    description:
+      Must be the device tree identifier of the GPIO connected to the
+      PD_PAD pin. This pin is used to place the OV02A10 into standby mode
+      or shutdown mode. As the line needs to be high for the powerdown mode
+      to be active, it should be marked GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Must be the device tree identifier of the GPIO connected to the
+      RST_PD pin. If specified, it will be asserted during driver probe.
+      As the line needs to be low for the reset to be active, it should be
+      marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  rotation:
+    enum:
+      - 0    # Sensor Mounted Upright
+      - 180  # Sensor Mounted Upside Down
+    default: 0
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Output port node, single endpoint describing the CSI-2 transmitter.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+          ovti,mipi-clock-voltage:
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            description:
+              Definition of MIPI clock voltage unit. This entry corresponds to
+              the link speed defined by the 'link-frequencies' property.
+              If present, the value shall be in the range of 0-4.
+            default: 4
+
+        required:
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-frequency
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - powerdown-gpios
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov02a10: camera-sensor@3d {
+            compatible = "ovti,ov02a10";
+            reg = <0x3d>;
+
+            powerdown-gpios = <&pio 107 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>;
+
+            clocks = <&ov02a10_clk>;
+            clock-names = "eclk";
+            clock-frequency = <24000000>;
+
+            rotation = <180>;
+
+            dovdd-supply = <&ov02a10_dovdd>;
+            avdd-supply = <&ov02a10_avdd>;
+            dvdd-supply = <&ov02a10_dvdd>;
+
+            port {
+                wcam_out: endpoint {
+                    link-frequencies = /bits/ 64 <390000000>;
+                    ovti,mipi-clock-voltage = <3>;
+                    remote-endpoint = <&mipi_in_wcam>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
new file mode 100644
index 000000000000..cf456f8d9ddc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov2680.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV2680 CMOS Sensor
+
+maintainers:
+  - Rui Miguel Silva <rmfrfs@gmail.com>
+
+description: |-
+  The OV2680 color sensor is a low voltage, high performance 1/5 inch UXGA (2
+  megapixel) CMOS image sensor that provides a single-chip UXGA (1600 x 1200)
+  camera. It provides full-frame, sub-sampled, or windowed 10-bit images in
+  various formats via the control of the Serial Camera Control Bus (SCCB)
+  interface. The OV2680 has an image array capable of operating at up to 30
+  frames per second (fps) in UXGA resolution.
+
+properties:
+  compatible:
+    const: ovti,ov2680
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xvclk
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDOWN which is physically
+      active low.
+    maxItems: 1
+
+  dovdd-supply:
+    description:
+      Definition of the regulator used as interface power supply.
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+  dvdd-supply:
+    description:
+      Definition of the regulator used as digital power supply.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A node containing an output port node.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov2680: camera-sensor@36 {
+                compatible = "ovti,ov2680";
+                reg = <0x36>;
+                clocks = <&osc>;
+                clock-names = "xvclk";
+                reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+
+                dovdd-supply = <&sw2_reg>;
+                dvdd-supply = <&sw2_reg>;
+                avdd-supply = <&reg_peri_3p15v>;
+
+                port {
+                        ov2680_to_mipi: endpoint {
+                                remote-endpoint = <&mipi_from_sensor>;
+                        };
+                };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
new file mode 100644
index 000000000000..540fd69ac39f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV5640 Image Sensor Device Tree Bindings
+
+maintainers:
+  - Steve Longerbeam <slongerbeam@gmail.com>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov5640
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XCLK Input Clock
+
+  clock-names:
+    const: xclk
+
+  AVDD-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  DVDD-supply:
+    description: Digital core voltage supply, 1.5 volts
+
+  DOVDD-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  powerdown-gpios:
+    maxItems: 1
+    description: >
+      Reference to the GPIO connected to the powerdown pin, if any.
+
+  reset-gpios:
+    maxItems: 1
+    description: >
+      Reference to the GPIO connected to the reset pin, if any.
+
+  rotation:
+    enum:
+      - 0
+      - 180
+
+  port:
+    description: Digital Output Port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          clock-lanes:
+            const: 0
+
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+          bus-width:
+            enum: [8, 10]
+
+          data-shift:
+            enum: [0, 2]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - AVDD-supply
+  - DVDD-supply
+  - DOVDD-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/clock/imx6qdl-clock.h>
+      #include <dt-bindings/gpio/gpio.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@3c {
+              compatible = "ovti,ov5640";
+              pinctrl-names = "default";
+              pinctrl-0 = <&pinctrl_ov5640>;
+              reg = <0x3c>;
+              clocks = <&clks IMX6QDL_CLK_CKO>;
+              clock-names = "xclk";
+              DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+              AVDD-supply = <&vgen3_reg>;  /* 2.8v */
+              DVDD-supply = <&vgen2_reg>;  /* 1.5v */
+              powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+              reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+              rotation = <180>;
+
+              port {
+                  /* MIPI CSI-2 bus endpoint */
+                  ov5640_to_mipi_csi2: endpoint {
+                      remote-endpoint = <&mipi_csi2_from_ov5640>;
+                      clock-lanes = <0>;
+                      data-lanes = <1 2>;
+                  };
+              };
+          };
+      };
+
+  - |
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@3c {
+              compatible = "ovti,ov5640";
+              pinctrl-names = "default";
+              pinctrl-0 = <&pinctrl_ov5640>;
+              reg = <0x3c>;
+              clocks = <&clk_ext_camera>;
+              clock-names = "xclk";
+              DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+              AVDD-supply = <&vgen3_reg>;  /* 2.8v */
+              DVDD-supply = <&vgen2_reg>;  /* 1.5v */
+
+              port {
+                  /* Parallel bus endpoint */
+                  ov5640_to_parallel: endpoint {
+                      remote-endpoint = <&parallel_from_ov5640>;
+                      bus-width = <8>;
+                      data-shift = <2>; /* lines 9:2 are used */
+                      hsync-active = <0>;
+                      vsync-active = <0>;
+                      pclk-sample = <1>;
+                  };
+              };
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml
new file mode 100644
index 000000000000..a2abed06a099
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5647.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5647 raw image sensor
+
+maintainers:
+  - Dave Stevenson <dave.stevenson@raspberrypi.com>
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |-
+  The OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data
+  interfaces and CCI (I2C compatible) control bus.
+
+properties:
+  compatible:
+    const: ovti,ov5647
+
+  reg:
+    description: I2C device address.
+    maxItems: 1
+
+  clocks:
+    description: Reference to the xclk clock.
+    maxItems: 1
+
+  pwdn-gpios:
+    description: Reference to the GPIO connected to the pwdn pin. Active high.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          clock-noncontinuous: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5647: camera@36 {
+            compatible = "ovti,ov5647";
+            reg = <0x36>;
+            clocks = <&camera_clk>;
+            pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+
+            port {
+                camera_out: endpoint {
+                    remote-endpoint = <&csi1_ep1>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
new file mode 100644
index 000000000000..246dc5fec716
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5648.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV5648 Image Sensor Device Tree Bindings
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    const: ovti,ov5648
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XVCLK Clock
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  dvdd-supply:
+    description: Digital Domain Power Supply
+
+  avdd-supply:
+    description: Analog Domain Power Supply (internal AVDD is used if missing)
+
+  dovdd-supply:
+    description: I/O Domain Power Supply
+
+  powerdown-gpios:
+    maxItems: 1
+    description: Power Down Pin GPIO Control (active low)
+
+  reset-gpios:
+    maxItems: 1
+    description: Reset Pin GPIO Control (active low)
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - assigned-clocks
+  - assigned-clock-rates
+  - dvdd-supply
+  - dovdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5648: camera@36 {
+            compatible = "ovti,ov5648";
+            reg = <0x36>;
+
+            dvdd-supply = <&ov5648_dvdd>;
+            avdd-supply = <&ov5648_avdd>;
+            dovdd-supply = <&ov5648_dovdd>;
+            clocks = <&ov5648_xvclk 0>;
+            assigned-clocks = <&ov5648_xvclk 0>;
+            assigned-clock-rates = <24000000>;
+
+
+            ov5648_out: port {
+                ov5648_out_mipi_csi2: endpoint {
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <210000000 168000000>;
+
+                    remote-endpoint = <&mipi_csi2_in_ov5648>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
new file mode 100644
index 000000000000..359dc08440a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Amarulasolutions
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5693 CMOS Sensor
+
+maintainers:
+  - Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
+
+description: |
+  The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS
+  image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface.
+
+  OV5693 is controlled via I2C and two-wire Serial Camera Control Bus (SCCB).
+  The sensor output is available via CSI-2 serial data output (up to 2-lane).
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov5693
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      System input clock (aka XVCLK). From 6 to 27 MHz.
+    maxItems: 1
+
+  dovdd-supply:
+    description:
+      Digital I/O voltage supply, 1.8V.
+
+  avdd-supply:
+    description:
+      Analog voltage supply, 2.8V.
+
+  dvdd-supply:
+    description:
+      Digital core voltage supply, 1.2V.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDN which is physically
+      active low.
+    maxItems: 1
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5693: camera@36 {
+            compatible = "ovti,ov5693";
+            reg = <0x36>;
+
+            reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cif_clkout_m0>;
+
+            clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vcc_1v8>;
+            dvdd-supply = <&vcc_1v2>;
+            dovdd-supply = <&vcc_2v8>;
+
+            rotation = <90>;
+            orientation = <0>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <450000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
new file mode 100644
index 000000000000..44529425ce3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov772x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV7720/OV7725 CMOS sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+  The Omnivision OV7720/OV7725 sensor supports multiple resolutions output,
+  such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can
+  support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats.
+
+properties:
+  compatible:
+    enum:
+      - ovti,ov7720
+      - ovti,ov7725
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  reset-gpios:
+    description: |
+      Reference to the GPIO connected to the RSTB pin which is active low.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: |
+      Reference to the GPIO connected to the PWDN pin which is active high.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+
+          bus-width:
+            enum: [8, 10]
+            default: 10
+
+          data-shift:
+            enum: [0, 2]
+            default: 0
+
+          hsync-active:
+            enum: [0, 1]
+            default: 1
+
+          vsync-active:
+            enum: [0, 1]
+            default: 1
+
+          pclk-sample:
+            enum: [0, 1]
+            default: 1
+
+        allOf:
+          - if:
+              properties:
+                bus-type:
+                  const: 6
+            then:
+              properties:
+                hsync-active: false
+                vsync-active: false
+
+          - if:
+              properties:
+                bus-width:
+                  const: 10
+            then:
+              properties:
+                data-shift:
+                  const: 0
+
+        required:
+          - bus-type
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ov772x: camera@21 {
+            compatible = "ovti,ov7725";
+            reg = <0x21>;
+            reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>;
+            powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>;
+            clocks = <&xclk>;
+
+            port {
+                ov772x_0: endpoint {
+                    bus-type = <5>;
+                    vsync-active = <0>;
+                    hsync-active = <0>;
+                    pclk-sample = <0>;
+                    bus-width = <8>;
+                    data-shift = <0>;
+                    remote-endpoint = <&vcap1_in0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
new file mode 100644
index 000000000000..b962863e4f65
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov8865.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV8865 Image Sensor Device Tree Bindings
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    const: ovti,ov8865
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: EXTCLK Clock
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  dvdd-supply:
+    description: Digital Domain Power Supply
+
+  avdd-supply:
+    description: Analog Domain Power Supply
+
+  dovdd-supply:
+    description: I/O Domain Power Supply
+
+  powerdown-gpios:
+    maxItems: 1
+    description: Power Down Pin GPIO Control (active low)
+
+  reset-gpios:
+    maxItems: 1
+    description: Reset Pin GPIO Control (active low)
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+          data-lanes:
+            minItems: 1
+            maxItems: 4
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - assigned-clocks
+  - assigned-clock-rates
+  - dvdd-supply
+  - avdd-supply
+  - dovdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c2 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov8865: camera@36 {
+            compatible = "ovti,ov8865";
+            reg = <0x36>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&csi_mclk_pin>;
+
+            clocks = <&ccu CLK_CSI_MCLK>;
+            assigned-clocks = <&ccu CLK_CSI_MCLK>;
+            assigned-clock-rates = <24000000>;
+
+            avdd-supply = <&reg_ov8865_avdd>;
+            dovdd-supply = <&reg_ov8865_dovdd>;
+            dvdd-supply = <&reg_ov8865_dvdd>;
+
+            powerdown-gpios = <&pio 4 17 GPIO_ACTIVE_LOW>; /* PE17 */
+            reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
+
+            port {
+                ov8865_out_mipi_csi2: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <360000000>;
+
+                    remote-endpoint = <&mipi_csi2_in_ov8865>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
new file mode 100644
index 000000000000..bf115ab9d926
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov9282.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV9282 Sensor
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  OV9282 sensor is an OmniVision black & white CMOS active pixel digital image
+  sensor with an active array size of 1296H x 816V. It is programmable through
+  I2C interface. The I2C client address is fixed to 0x60/0x70 as per sensor data
+  sheet. Image data is sent through MIPI CSI-2.
+
+properties:
+  compatible:
+    const: ovti,ov9282
+  reg:
+    description: I2C address
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    description: Clock frequency from 6 to 27MHz
+    maxItems: 1
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XCLR pin, if any.
+    maxItems: 1
+
+  port:
+    additionalProperties: false
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes: true
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@60 {
+            compatible = "ovti,ov9282";
+            reg = <0x60>;
+            clocks = <&ov9282_clk>;
+
+            assigned-clocks = <&ov9282_clk>;
+            assigned-clock-parents = <&ov9282_clk_parent>;
+            assigned-clock-rates = <24000000>;
+
+            port {
+                ov9282: endpoint {
+                    remote-endpoint = <&cam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <800000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml
new file mode 100644
index 000000000000..f50e54a722eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/rda,rda5807.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc Communications RDA5807 FM radio receiver
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    enum:
+      - rda,rda5807
+
+  reg:
+    description: I2C address.
+    maxItems: 1
+
+  power-supply: true
+
+  rda,lnan:
+    description: Use LNAN input port.
+    type: boolean
+
+  rda,lnap:
+    description: Use LNAP input port.
+    type: boolean
+
+  rda,analog-out:
+    description: Enable analog audio output.
+    type: boolean
+
+  rda,i2s-out:
+    description: Enable I2S digital audio output.
+    type: boolean
+
+  rda,lna-microamp:
+    description: LNA working current, in micro-amperes.
+    default: 2500
+    enum: [1800, 2100, 2500, 3000]
+
+required:
+  - compatible
+  - reg
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      radio@11 {
+        compatible = "rda,rda5807";
+        reg = <0x11>;
+
+        power-supply = <&ldo6>;
+
+        rda,lnan;
+        rda,lnap;
+        rda,analog-out;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
deleted file mode 100644
index f11f28a5fda4..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor
-
-The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with
-an active array size of 4224H x 3200V. It is programmable through an I2C
-interface.
-Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum
-throughput of 1.2Gbps/lane.
-
-
-Required Properties:
-- compatible: Shall be "sony,imx214".
-- reg: I2C bus address of the device. Depending on how the sensor is wired,
-       it shall be <0x10> or <0x1a>;
-- enable-gpios: GPIO descriptor for the enable pin.
-- vdddo-supply: Chip digital IO regulator (1.8V).
-- vdda-supply: Chip analog regulator (2.7V).
-- vddd-supply: Chip digital core regulator (1.12V).
-- clocks: Reference to the xclk clock.
-- clock-frequency: Frequency of the xclk clock.
-
-Optional Properties:
-- flash-leds: See ../video-interfaces.txt
-- lens-focus: See ../video-interfaces.txt
-
-The imx214 device node shall contain one 'port' child node with
-an 'endpoint' subnode. For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Required Properties on endpoint:
-- data-lanes: check ../video-interfaces.txt
-- link-frequencies: check ../video-interfaces.txt
-- remote-endpoint: check ../video-interfaces.txt
-
-Example:
-
-	camera-sensor@1a {
-		compatible = "sony,imx214";
-		reg = <0x1a>;
-		vdddo-supply = <&pm8994_lvs1>;
-		vddd-supply = <&camera_vddd_1v12>;
-		vdda-supply = <&pm8994_l17>;
-		lens-focus = <&ad5820>;
-		enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
-		clocks = <&mmcc CAMSS_MCLK0_CLK>;
-		clock-frequency = <24000000>;
-		port {
-			imx214_ep: endpoint {
-				data-lanes = <1 2 3 4>;
-				link-frequencies = /bits/ 64 <480000000>;
-				remote-endpoint = <&csiphy0_ep>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
new file mode 100644
index 000000000000..c9760f895b3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx214.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/3.06-Inch 13.13MP CMOS Digital Image Sensor
+
+maintainers:
+  - Ricardo Ribalda <ribalda@kernel.org>
+
+description: |
+  The Sony IMX214 is a 1/3.06-inch CMOS active pixel digital image sensor with
+  an active array size of 4224H x 3200V. It is programmable through an I2C
+  interface. Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a
+  maximum throughput of 1.2Gbps/lane.
+
+allOf:
+  - $ref: ../video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: sony,imx214
+
+  reg:
+    enum:
+      - 0x10
+      - 0x1a
+
+  clocks:
+    description: Reference to the xclk clock.
+    maxItems: 1
+
+  clock-frequency:
+    description: Frequency of the xclk clock in Hz.
+
+  enable-gpios:
+    description: GPIO descriptor for the enable pin.
+    maxItems: 1
+
+  vdddo-supply:
+    description: Chip digital IO regulator (1.8V).
+
+  vdda-supply:
+    description: Chip analog regulator (2.7V).
+
+  vddd-supply:
+    description: Chip digital core regulator (1.12V).
+
+  flash-leds: true
+  lens-focus: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            anyOf:
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-frequency
+  - enable-gpios
+  - vdddo-supply
+  - vdda-supply
+  - vddd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@1a {
+            compatible = "sony,imx214";
+            reg = <0x1a>;
+            vdddo-supply = <&pm8994_lvs1>;
+            vddd-supply = <&camera_vddd_1v12>;
+            vdda-supply = <&pm8994_l17>;
+            lens-focus = <&ad5820>;
+            enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+            clocks = <&camera_clk>;
+            clock-frequency = <24000000>;
+
+            port {
+                imx214_ep: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <480000000>;
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
new file mode 100644
index 000000000000..4271fc3cc623
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor
+
+maintainers:
+  - Leon Luo <leonl@leopardimaging.com>
+
+description: |
+  The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an
+  active array size of 3864H x 2202V. It is programmable through I2C interface.
+  Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440
+  Mbps.
+
+properties:
+  compatible:
+    const: sony,imx274
+
+  reg:
+    const: 0x1a
+
+  reset-gpios:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: inck
+
+  vana-supply:
+    description: Sensor 2.8 V analog supply.
+
+  vdig-supply:
+    description: Sensor 1.8 V digital core supply.
+
+  vddl-supply:
+    description: Sensor digital IO 1.2 V supply.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx274: camera-sensor@1a {
+            compatible = "sony,imx274";
+            reg = <0x1a>;
+            reset-gpios = <&gpio_sensor 0 0>;
+
+            port {
+                sensor_out: endpoint {
+                    remote-endpoint = <&csiss_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
new file mode 100644
index 000000000000..f5055b9db693
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx334.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX334 Sensor
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  IMX334 sensor is a Sony CMOS active pixel digital image sensor with an active
+  array size of 3864H x 2202V. It is programmable through I2C interface. The
+  I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
+  sent through MIPI CSI-2.
+
+properties:
+  compatible:
+    const: sony,imx334
+  reg:
+    description: I2C address
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
+    maxItems: 1
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XCLR pin, if any.
+
+  port:
+    additionalProperties: false
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes: true
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@1a {
+            compatible = "sony,imx334";
+            reg = <0x1a>;
+            clocks = <&imx334_clk>;
+
+            assigned-clocks = <&imx334_clk>;
+            assigned-clock-parents = <&imx334_clk_parent>;
+            assigned-clock-rates = <24000000>;
+
+            port {
+                imx334: endpoint {
+                    remote-endpoint = <&cam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <891000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
new file mode 100644
index 000000000000..cf2ca2702cc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx335.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX335 Sensor
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  IMX335 sensor is a Sony CMOS active pixel digital image sensor with an active
+  array size of 2592H x 1944V. It is programmable through I2C interface. The
+  I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
+  sent through MIPI CSI-2.
+
+properties:
+  compatible:
+    const: sony,imx335
+  reg:
+    description: I2C address
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
+    maxItems: 1
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XCLR pin, if any.
+    maxItems: 1
+
+  port:
+    additionalProperties: false
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes: true
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@1a {
+            compatible = "sony,imx335";
+            reg = <0x1a>;
+            clocks = <&imx335_clk>;
+
+            assigned-clocks = <&imx335_clk>;
+            assigned-clock-parents = <&imx335_clk_parent>;
+            assigned-clock-rates = <24000000>;
+
+            port {
+                imx335: endpoint {
+                    remote-endpoint = <&cam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <594000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
new file mode 100644
index 000000000000..26d1807d0bb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx412.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX412 Sensor
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  IMX412 sensor is a Sony CMOS active pixel digital image sensor with an active
+  array size of 4072H x 3176V. It is programmable through I2C interface. The
+  I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
+  sent through MIPI CSI-2.
+
+properties:
+  compatible:
+    const: sony,imx412
+  reg:
+    description: I2C address
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    description: Clock frequency 6MHz, 12MHz, 18MHz, 24MHz or 27MHz
+    maxItems: 1
+
+  dovdd-supply:
+    description: Interface power supply.
+
+  avdd-supply:
+    description: Analog power supply.
+
+  dvdd-supply:
+    description: Digital power supply.
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XCLR pin, if any.
+    maxItems: 1
+
+  port:
+    additionalProperties: false
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes: true
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@1a {
+            compatible = "sony,imx412";
+            reg = <0x1a>;
+            clocks = <&imx412_clk>;
+
+            assigned-clocks = <&imx412_clk>;
+            assigned-clock-parents = <&imx412_clk_parent>;
+            assigned-clock-rates = <24000000>;
+
+            port {
+                imx412: endpoint {
+                    remote-endpoint = <&cam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <600000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
index 8c0fc1a26bf0..719b2995dc17 100644
--- a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
+++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
@@ -5,38 +5,150 @@ The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL
 with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats.
 
 Required Properties:
-- compatible: value must be "ti,tvp5150"
-- reg: I2C slave address
+====================
+- compatible:	Value must be "ti,tvp5150".
+- reg:		I2C slave address.
 
 Optional Properties:
-- pdn-gpios: phandle for the GPIO connected to the PDN pin, if any.
-- reset-gpios: phandle for the GPIO connected to the RESETB pin, if any.
+====================
+- pdn-gpios:	Phandle for the GPIO connected to the PDN pin, if any.
+- reset-gpios:	Phandle for the GPIO connected to the RESETB pin, if any.
 
-The device node must contain one 'port' child node for its digital output
-video port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
+The device node must contain one 'port' child node per device physical input
+and output port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
+are numbered as follows
 
-Required Endpoint Properties for parallel synchronization:
+	  Name		Type		Port
+	--------------------------------------
+	  AIP1A		sink		0
+	  AIP1B		sink		1
+	  Y-OUT		src		2
 
-- hsync-active: active state of the HSYNC signal. Must be <1> (HIGH).
-- vsync-active: active state of the VSYNC signal. Must be <1> (HIGH).
-- field-even-active: field signal level during the even field data
-  transmission. Must be <0>.
+The device node must contain at least one sink port and the src port. Each input
+port must be linked to an endpoint defined in [1]. The port/connector layout is
+as follows
 
-If none of hsync-active, vsync-active and field-even-active is specified,
-the endpoint is assumed to use embedded BT.656 synchronization.
+tvp-5150 port@0 (AIP1A)
+	endpoint@0 -----------> Comp0-Con  port
+	endpoint@1 ------+----> Svideo-Con port
+tvp-5150 port@1 (AIP1B)  |
+	endpoint@1 ------+
+	endpoint@0 -----------> Comp1-Con  port
+tvp-5150 port@2
+	endpoint (video bitstream output at YOUT[0-7] parallel bus)
 
-Example:
+Required Endpoint Properties for parallel synchronization on output port:
+=========================================================================
+
+- hsync-active:		Active state of the HSYNC signal. Must be <1> (HIGH).
+- vsync-active:		Active state of the VSYNC signal. Must be <1> (HIGH).
+- field-even-active:	Field signal level during the even field data
+			transmission. Must be <0>.
+
+Note: Do not specify any of these properties if you want to use the embedded
+      BT.656 synchronization.
+
+Optional Connector Properties:
+==============================
+
+- sdtv-standards: Set the possible signals to which the hardware tries to lock
+                  instead of using the autodetection mechnism. Please look at
+                  [1] for more information.
+
+[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml.
+
+Example - three input sources:
+#include <dt-bindings/display/sdtv-standards.h>
+
+comp_connector_0 {
+	compatible = "composite-video-connector";
+	label = "Composite0";
+	sdtv-standards = <SDTV_STD_PAL_M>; /* limit to pal-m signals */
+
+	port {
+		composite0_to_tvp5150: endpoint {
+			remote-endpoint = <&tvp5150_to_composite0>;
+		};
+	};
+};
+
+comp_connector_1 {
+	compatible = "composite-video-connector";
+	label = "Composite1";
+	sdtv-standards = <SDTV_STD_NTSC_M>; /* limit to ntsc-m signals */
+
+	port {
+		composite1_to_tvp5150: endpoint {
+			remote-endpoint = <&tvp5150_to_composite1>;
+		};
+	};
+};
+
+svideo_connector {
+	compatible = "svideo-connector";
+	label = "S-Video";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		svideo_luma_to_tvp5150: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&tvp5150_to_svideo_luma>;
+		};
+
+		svideo_chroma_to_tvp5150: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&tvp5150_to_svideo_chroma>;
+		};
+	};
+};
 
 &i2c2 {
-	...
 	tvp5150@5c {
 		compatible = "ti,tvp5150";
 		reg = <0x5c>;
 		pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
 		reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tvp5150_to_composite0: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&composite0_to_tvp5150>;
+			};
+
+			tvp5150_to_svideo_luma: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&svideo_luma_to_tvp5150>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tvp5150_to_composite1: endpoint@0 {
+				reg = <0>;
+                                remote-endpoint = <&composite1_to_tvp5150>;
+			};
+
+			tvp5150_to_svideo_chroma: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&svideo_chroma_to_tvp5150>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
 
-		port {
 			tvp5150_1: endpoint {
 				remote-endpoint = <&ccdc_ep>;
 			};
diff --git a/Documentation/devicetree/bindings/media/imx7-csi.txt b/Documentation/devicetree/bindings/media/imx7-csi.txt
deleted file mode 100644
index d80ceefa0c00..000000000000
--- a/Documentation/devicetree/bindings/media/imx7-csi.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Freescale i.MX7 CMOS Sensor Interface
-=====================================
-
-csi node
---------
-
-This is device node for the CMOS Sensor Interface (CSI) which enables the chip
-to connect directly to external CMOS image sensors.
-
-Required properties:
-
-- compatible    : "fsl,imx7-csi" or "fsl,imx6ul-csi";
-- reg           : base address and length of the register set for the device;
-- interrupts    : should contain CSI interrupt;
-- clocks        : list of clock specifiers, see
-        Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
-- clock-names   : must contain "mclk";
-
-The device node shall contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in:
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-In the following example a remote endpoint is a video multiplexer.
-
-example:
-
-                csi: csi@30710000 {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-
-                        compatible = "fsl,imx7-csi";
-                        reg = <0x30710000 0x10000>;
-                        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-                        clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
-                        clock-names = "mclk";
-
-                        port {
-                                csi_from_csi_mux: endpoint {
-                                        remote-endpoint = <&csi_mux_to_csi>;
-                                };
-                        };
-                };
diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
deleted file mode 100644
index 71fd74ed3ec8..000000000000
--- a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-Freescale i.MX7 Mipi CSI2
-=========================
-
-mipi_csi2 node
---------------
-
-This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is
-compatible with previous version of Samsung D-phy.
-
-Required properties:
-
-- compatible    : "fsl,imx7-mipi-csi2";
-- reg           : base address and length of the register set for the device;
-- interrupts    : should contain MIPI CSIS interrupt;
-- clocks        : list of clock specifiers, see
-        Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
-- clock-names   : must contain "pclk", "wrap" and "phy" entries, matching
-                  entries in the clock property;
-- power-domains : a phandle to the power domain, see
-          Documentation/devicetree/bindings/power/power_domain.txt for details.
-- reset-names   : should include following entry "mrst";
-- resets        : a list of phandle, should contain reset entry of
-                  reset-names;
-- phy-supply    : from the generic phy bindings, a phandle to a regulator that
-	          provides power to MIPI CSIS core;
-
-Optional properties:
-
-- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
-		    value when this property is not specified is 166 MHz;
-- fsl,csis-hs-settle : differential receiver (HS-RX) settle time;
-
-The device node should contain two 'port' child nodes with one child 'endpoint'
-node, according to the bindings defined in:
- Documentation/devicetree/bindings/ media/video-interfaces.txt.
- The following are properties specific to those nodes.
-
-port node
----------
-
-- reg		  : (required) can take the values 0 or 1, where 0 shall be
-                     related to the sink port and port 1 shall be the source
-                     one;
-
-endpoint node
--------------
-
-- data-lanes    : (required) an array specifying active physical MIPI-CSI2
-		    data input lanes and their mapping to logical lanes; this
-                    shall only be applied to port 0 (sink port), the array's
-                    content is unused only its length is meaningful,
-                    in this case the maximum length supported is 2;
-
-example:
-
-        mipi_csi: mipi-csi@30750000 {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                compatible = "fsl,imx7-mipi-csi2";
-                reg = <0x30750000 0x10000>;
-                interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-                                <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
-                                <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
-                clock-names = "pclk", "wrap", "phy";
-                clock-frequency = <166000000>;
-                power-domains = <&pgc_mipi_phy>;
-                phy-supply = <&reg_1p0d>;
-                resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
-                reset-names = "mrst";
-                fsl,csis-hs-settle = <3>;
-
-                port@0 {
-                        reg = <0>;
-
-                        mipi_from_sensor: endpoint {
-                                remote-endpoint = <&ov2680_to_mipi>;
-                                data-lanes = <1>;
-                        };
-                };
-
-                port@1 {
-                        reg = <1>;
-
-                        mipi_vc0_to_csi_mux: endpoint {
-                                remote-endpoint = <&csi_mux_from_mipi_vc0>;
-                        };
-                };
-        };
diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt
deleted file mode 100644
index 7ec2c8c8a3b9..000000000000
--- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Marvell MMP2 camera host interface
-
-Required properties:
- - compatible: Should be "marvell,mmp2-ccic".
- - reg: Register base and size.
- - interrupts: The interrupt number.
- - #clock-cells: Must be 0.
-
-Optional properties:
- - clocks: Reference to the input clock as specified by
-           Documentation/devicetree/bindings/clock/clock-bindings.txt.
- - clock-names: Names of the clocks used; "axi" for the AXI bus interface,
-                "func" for the peripheral clock and "phy" for the parallel
-                video bus interface.
- - clock-output-names: Optional clock source for sensors. Shall be "mclk".
-
-Required subnodes:
- - port: The parallel bus interface port with a single endpoint linked to
-         the sensor's endpoint as described in
-         Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Required endpoint properties:
- - bus-type: data bus type, <5> or <6> for Parallel or Bt.656 respectively
- - pclk-sample: pixel clock polarity
- - hsync-active: horizontal synchronization polarity (only required for
-   parallel bus)
- - vsync-active: vertical synchronization polarity (only required for
-   parallel bus)
-
-Example:
-
-	camera0: camera@d420a000 {
-		compatible = "marvell,mmp2-ccic";
-		reg = <0xd420a000 0x800>;
-		interrupts = <42>;
-		clocks = <&soc_clocks MMP2_CLK_CCIC0>;
-		clock-names = "axi";
-		#clock-cells = <0>;
-		clock-output-names = "mclk";
-
-		port {
-			camera0_0: endpoint {
-				remote-endpoint = <&ov7670_0>;
-                                bus-type = <5>;      /* Parallel */
-                                hsync-active = <1>;  /* Active high */
-                                vsync-active = <1>;  /* Active high */
-                                pclk-sample = <0>;   /* Falling */
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
new file mode 100644
index 000000000000..b39b84c5f012
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/marvell,mmp2-ccic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP2 camera host interface bindings
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  $nodename:
+    pattern: '^camera@[a-f0-9]+$'
+
+  compatible:
+    const: marvell,mmp2-ccic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          hsync-active: true
+          vsync-active: true
+          pclk-sample: true
+          bus-type: true
+
+  clocks:
+    minItems: 1
+    items:
+      - description: AXI bus interface clock
+      - description: Peripheral clock
+      - description: Parallel video bus interface clock
+
+  clock-names:
+    const: axi
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    const: mclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2.h>
+    #include <dt-bindings/power/marvell,mmp2.h>
+
+    camera@d420a000 {
+      compatible = "marvell,mmp2-ccic";
+      reg = <0xd420a000 0x800>;
+      interrupts = <42>;
+      clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+      clock-names = "axi";
+      #clock-cells = <0>;
+      clock-output-names = "mclk";
+      power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
+
+      port {
+        camera0_0: endpoint {
+          remote-endpoint = <&ov7670_0>;
+          bus-type = <5>;      /* Parallel */
+          hsync-active = <1>;  /* Active high */
+          vsync-active = <1>;  /* Active high */
+          pclk-sample = <0>;   /* Falling */
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
new file mode 100644
index 000000000000..9cfc0c7d23e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Read Direct Memory Access
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek Read Direct Memory Access(RDMA) component used to do read DMA.
+  It contains one line buffer to store the sufficient pixel data, and
+  must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt8183-mdp3-rdma
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RDMA clock
+      - description: RSZ clock
+
+  iommus:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: used for 1st data pipe from RDMA
+      - description: used for 2nd data pipe from RDMA
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_rdma0: mdp3-rdma0@14001000 {
+      compatible = "mediatek,mt8183-mdp3-rdma";
+      reg = <0x14001000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+                            <CMDQ_EVENT_MDP_RDMA0_EOF>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+               <&mmsys CLK_MM_MDP_RSZ1>;
+      iommus = <&iommu>;
+      mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
+               <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
new file mode 100644
index 000000000000..78f9de6192ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-rsz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Resizer
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  One of Media Data Path 3 (MDP3) components used to do frame resizing.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-rsz
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    mdp3_rsz0: mdp3-rsz0@14003000 {
+      compatible = "mediatek,mt8183-mdp3-rsz";
+      reg = <0x14003000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ0_SOF>,
+                            <CMDQ_EVENT_MDP_RSZ0_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+    };
+
+    mdp3_rsz1: mdp3-rsz1@14004000 {
+      compatible = "mediatek,mt8183-mdp3-rsz";
+      reg = <0x14004000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ1_SOF>,
+                            <CMDQ_EVENT_MDP_RSZ1_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
new file mode 100644
index 000000000000..0baa77198fa2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-wrot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Write DMA with Rotation
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  One of Media Data Path 3 (MDP3) components used to write DMA with frame rotation.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-wrot
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_wrot0: mdp3-wrot0@14005000 {
+      compatible = "mediatek,mt8183-mdp3-wrot";
+      reg = <0x14005000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+                            <CMDQ_EVENT_MDP_WROT0_EOF>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_WROT0>;
+      iommus = <&iommu>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
new file mode 100644
index 000000000000..aa55ca65d6ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,vcodec-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Video Decode Accelerator
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |+
+  Mediatek Video Decode is the video decode hardware present in Mediatek
+  SoCs which supports high resolution decoding functionalities.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8173-vcodec-dec
+      - mediatek,mt8183-vcodec-dec
+
+  reg:
+    maxItems: 12
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 8
+
+  clock-names:
+    items:
+      - const: vcodecpll
+      - const: univpll_d2
+      - const: clk_cci400_sel
+      - const: vdec_sel
+      - const: vdecpll
+      - const: vencpll
+      - const: venc_lt_sel
+      - const: vdec_bus_clk_src
+
+  assigned-clocks: true
+
+  assigned-clock-parents: true
+
+  assigned-clock-rates: true
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  dma-ranges:
+    maxItems: 1
+    description: |
+      Describes the physical address space of IOMMU maps to memory.
+
+  mediatek,vpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to vpu.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to scp.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+  - assigned-clocks
+  - assigned-clock-parents
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8183-vcodec-dec
+
+    then:
+      required:
+        - mediatek,scp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8173-vcodec-dec
+
+    then:
+      required:
+        - mediatek,vpu
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    vcodec_dec: vcodec@16000000 {
+      compatible = "mediatek,mt8173-vcodec-dec";
+      reg = <0x16000000 0x100>,   /*VDEC_SYS*/
+          <0x16020000 0x1000>,  /*VDEC_MISC*/
+          <0x16021000 0x800>,   /*VDEC_LD*/
+          <0x16021800 0x800>,   /*VDEC_TOP*/
+          <0x16022000 0x1000>,  /*VDEC_CM*/
+          <0x16023000 0x1000>,  /*VDEC_AD*/
+          <0x16024000 0x1000>,  /*VDEC_AV*/
+          <0x16025000 0x1000>,  /*VDEC_PP*/
+          <0x16026800 0x800>,   /*VP8_VD*/
+          <0x16027000 0x800>,   /*VP6_VD*/
+          <0x16027800 0x800>,   /*VP8_VL*/
+          <0x16028400 0x400>;   /*VP9_VD*/
+      interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
+      mediatek,vpu = <&vpu>;
+      power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+      clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
+             <&topckgen CLK_TOP_UNIVPLL_D2>,
+             <&topckgen CLK_TOP_CCI400_SEL>,
+             <&topckgen CLK_TOP_VDEC_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL>,
+             <&apmixedsys CLK_APMIXED_VENCPLL>,
+             <&topckgen CLK_TOP_VENC_LT_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL_370P5>;
+      clock-names = "vcodecpll",
+                  "univpll_d2",
+                  "clk_cci400_sel",
+                  "vdec_sel",
+                  "vdecpll",
+                  "vencpll",
+                  "venc_lt_sel",
+                  "vdec_bus_clk_src";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
+                      <&topckgen CLK_TOP_CCI400_SEL>,
+                      <&topckgen CLK_TOP_VDEC_SEL>,
+                      <&apmixedsys CLK_APMIXED_VCODECPLL>,
+                      <&apmixedsys CLK_APMIXED_VENCPLL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
+                             <&topckgen CLK_TOP_UNIVPLL_D2>,
+                             <&topckgen CLK_TOP_VCODECPLL>;
+      assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
new file mode 100644
index 000000000000..32aee09aea33
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,vcodec-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Video Encode Accelerator
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |+
+  Mediatek Video Encode is the video encode hardware present in Mediatek
+  SoCs which supports high resolution encoding functionalities.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8173-vcodec-enc-vp8
+      - mediatek,mt8173-vcodec-enc
+      - mediatek,mt8183-vcodec-enc
+      - mediatek,mt8188-vcodec-enc
+      - mediatek,mt8192-vcodec-enc
+      - mediatek,mt8195-vcodec-enc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  assigned-clocks: true
+
+  assigned-clock-parents: true
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  dma-ranges:
+    maxItems: 1
+    description: |
+      Describes the physical address space of IOMMU maps to memory.
+
+  mediatek,vpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to vpu.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to scp.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+  - assigned-clocks
+  - assigned-clock-parents
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8183-vcodec-enc
+              - mediatek,mt8192-vcodec-enc
+
+    then:
+      required:
+        - mediatek,scp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8173-vcodec-enc-vp8
+              - mediatek,mt8173-vcodec-enc
+
+    then:
+      required:
+        - mediatek,vpu
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8173-vcodec-enc
+            - mediatek,mt8192-vcodec-enc
+
+    then:
+      properties:
+        clock:
+          items:
+            minItems: 1
+            maxItems: 1
+        clock-names:
+          items:
+            - const: venc_sel
+    else:  # for vp8 hw decoder
+      properties:
+        clock:
+          items:
+            minItems: 1
+            maxItems: 1
+        clock-names:
+          items:
+            - const: venc_lt_sel
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    vcodec_enc_avc: vcodec@18002000 {
+      compatible = "mediatek,mt8173-vcodec-enc";
+      reg = <0x18002000 0x1000>;
+      interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_VENC_RCPU>,
+             <&iommu M4U_PORT_VENC_REC>,
+             <&iommu M4U_PORT_VENC_BSDMA>,
+             <&iommu M4U_PORT_VENC_SV_COMV>,
+             <&iommu M4U_PORT_VENC_RD_COMV>,
+             <&iommu M4U_PORT_VENC_CUR_LUMA>,
+             <&iommu M4U_PORT_VENC_CUR_CHROMA>,
+             <&iommu M4U_PORT_VENC_REF_LUMA>,
+             <&iommu M4U_PORT_VENC_REF_CHROMA>,
+             <&iommu M4U_PORT_VENC_NBM_RDMA>,
+             <&iommu M4U_PORT_VENC_NBM_WDMA>;
+      mediatek,vpu = <&vpu>;
+      clocks = <&topckgen CLK_TOP_VENC_SEL>;
+      clock-names = "venc_sel";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
+    };
+
+    vcodec_enc_vp8: vcodec@19002000 {
+      compatible = "mediatek,mt8173-vcodec-enc-vp8";
+      reg =  <0x19002000 0x1000>;	/* VENC_LT_SYS */
+      interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
+             <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
+             <&iommu M4U_PORT_VENC_BSDMA_SET2>,
+             <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
+             <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
+             <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
+             <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
+             <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
+             <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
+      mediatek,vpu = <&vpu>;
+      clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+      clock-names = "venc_lt_sel";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
new file mode 100644
index 000000000000..c4f20acdc1f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
@@ -0,0 +1,293 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/mediatek,vcodec-subdev-decoder.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Mediatek Video Decode Accelerator With Multi Hardware
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |
+  Mediatek Video Decode is the video decode hardware present in Mediatek
+  SoCs which supports high resolution decoding functionalities. Required
+  parent and child device node.
+
+  About the Decoder Hardware Block Diagram, please check below:
+
+    +------------------------------------------------+-------------------------------------+
+    |                                                |                                     |
+    |  input -> lat soc HW -> lat HW -> lat buffer --|--> lat buffer -> core HW -> output  |
+    |            ||             ||                   |                     ||              |
+    +------------||-------------||-------------------+---------------------||--------------+
+                 ||     lat     ||                   |               core workqueue  <parent>
+    -------------||-------------||-------------------|---------------------||---------------
+                 ||<------------||----------------HW index---------------->||        <child>
+                 \/             \/                                         \/
+               +-------------------------------------------------------------+
+               |                          enable/disable                     |
+               |                 clk     power    irq    iommu               |
+               |                   (lat/lat soc/core0/core1)                 |
+               +-------------------------------------------------------------+
+
+  As above, there are parent and child devices, child mean each hardware. The child device
+  controls the information of each hardware independent which include clk/power/irq.
+
+  There are two workqueues in parent device: lat workqueue and core workqueue. They are used
+  to lat and core hardware deocder. Lat workqueue need to get input bitstream and lat buffer,
+  then enable lat to decode, writing the result to lat buffer, dislabe hardware when lat decode
+  done. Core workqueue need to get lat buffer and output buffer, then enable core to decode,
+  writing the result to output buffer, disable hardware when core decode done. These two
+  hardwares will decode each frame cyclically.
+
+  For the smi common may not the same for each hardware, can't combine all hardware in one node,
+  or leading to iommu fault when access dram data.
+
+  Lat soc is a hardware which is related with some larb(local arbiter) ports. For mt8195
+  platform, there are some ports like RDMA, UFO in lat soc larb, need to enable its power and
+  clock when lat start to work, don't have interrupt.
+
+  mt8195: lat soc HW + lat HW + core HW
+  mt8192: lat HW + core HW
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8192-vcodec-dec
+      - mediatek,mt8186-vcodec-dec
+      - mediatek,mt8188-vcodec-dec
+      - mediatek,mt8195-vcodec-dec
+
+  reg:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The node of system control processor (SCP), using
+      the remoteproc & rpmsg framework.
+
+  dma-ranges:
+    maxItems: 1
+    description: |
+      Describes the physical address space of IOMMU maps to memory.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+# Required child node:
+patternProperties:
+  '^vcodec-lat@[0-9a-f]+$':
+    type: object
+
+    properties:
+      compatible:
+        enum:
+          - mediatek,mtk-vcodec-lat
+          - mediatek,mtk-vcodec-lat-soc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description: |
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      clocks:
+        maxItems: 5
+
+      clock-names:
+        items:
+          - const: sel
+          - const: soc-vdec
+          - const: soc-lat
+          - const: vdec
+          - const: top
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - iommus
+      - clocks
+      - clock-names
+      - assigned-clocks
+      - assigned-clock-parents
+      - power-domains
+
+    additionalProperties: false
+
+  '^vcodec-core@[0-9a-f]+$':
+    type: object
+
+    properties:
+      compatible:
+        const: mediatek,mtk-vcodec-core
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description: |
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      clocks:
+        maxItems: 5
+
+      clock-names:
+        items:
+          - const: sel
+          - const: soc-vdec
+          - const: soc-lat
+          - const: vdec
+          - const: top
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - iommus
+      - clocks
+      - clock-names
+      - assigned-clocks
+      - assigned-clock-parents
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - iommus
+  - mediatek,scp
+  - dma-ranges
+  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mtk-vcodec-lat
+
+then:
+  required:
+    - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8192-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/power/mt8192-power.h>
+
+    bus@16000000 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0 0x16000000 0x16000000 0 0x40000>;
+
+        video-codec@16000000 {
+            compatible = "mediatek,mt8192-vcodec-dec";
+            mediatek,scp = <&scp>;
+            iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
+            dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0 0 0 0x16000000 0 0x40000>;
+            reg = <0 0x16000000 0 0x1000>;		/* VDEC_SYS */
+            vcodec-lat@10000 {
+                compatible = "mediatek,mtk-vcodec-lat";
+                reg = <0 0x10000 0 0x800>;
+                interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
+                iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
+                clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+                    <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+                    <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+                    <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+                    <&topckgen CLK_TOP_MAINPLL_D4>;
+                clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+                assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+                assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+                power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+            };
+
+            vcodec-core@25000 {
+                compatible = "mediatek,mtk-vcodec-core";
+                reg = <0 0x25000 0 0x1000>;
+                interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
+                iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
+                clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+                    <&vdecsys CLK_VDEC_VDEC>,
+                    <&vdecsys CLK_VDEC_LAT>,
+                    <&vdecsys CLK_VDEC_LARB1>,
+                    <&topckgen CLK_TOP_MAINPLL_D4>;
+                clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+                assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+                assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+                power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
deleted file mode 100644
index 044b11913c49..000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Mediatek JPEG Decoder
-
-Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
-
-Required properties:
-- compatible : must be one of the following string:
-	"mediatek,mt8173-jpgdec"
-	"mediatek,mt7623-jpgdec", "mediatek,mt2701-jpgdec"
-	"mediatek,mt2701-jpgdec"
-- reg : physical base address of the jpeg decoder registers and length of
-  memory mapped region.
-- interrupts : interrupt number to the interrupt controller.
-- clocks: device clocks, see
-  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "jpgdec-smi" and "jpgdec".
-- power-domains: a phandle to the power domain, see
-  Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
-  for details.
-- iommus: should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
-  for details.
-
-Example:
-	jpegdec: jpegdec@15004000 {
-		compatible = "mediatek,mt2701-jpgdec";
-		reg = <0 0x15004000 0 0x1000>;
-		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
-			  <&imgsys CLK_IMG_JPGDEC>;
-		clock-names = "jpgdec-smi",
-			      "jpgdec";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
-		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
-			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
-	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
new file mode 100644
index 000000000000..5e8d001492cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek-jpeg-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Decoder
+
+maintainers:
+  - Xia Jiang <xia.jiang@mediatek.com>
+
+description: |-
+  Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8173-jpgdec
+              - mediatek,mt2701-jpgdec
+      - items:
+          - enum:
+              - mediatek,mt7623-jpgdec
+          - const: mediatek,mt2701-jpgdec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: jpgdec-smi
+      - const: jpgdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 2
+    description: |
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt2701-larb-port.h>
+    #include <dt-bindings/power/mt2701-power.h>
+    jpegdec: jpegdec@15004000 {
+      compatible = "mediatek,mt2701-jpgdec";
+      reg = <0x15004000 0x1000>;
+      interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+      clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+                <&imgsys CLK_IMG_JPGDEC>;
+      clock-names = "jpgdec-smi",
+                    "jpgdec";
+      power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+      iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+               <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
new file mode 100644
index 000000000000..fc727300b493
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek-jpeg-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Encoder
+
+maintainers:
+  - Xia Jiang <xia.jiang@mediatek.com>
+
+description: |-
+  MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2701-jpgenc
+          - mediatek,mt8183-jpgenc
+          - mediatek,mt8186-jpgenc
+      - const: mediatek,mtk-jpgenc
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: jpgenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 2
+    description: |
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+  dma-ranges:
+    maxItems: 1
+    description: |
+      Describes the physical address space of IOMMU maps to memory.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt2701-larb-port.h>
+    #include <dt-bindings/power/mt2701-power.h>
+    jpegenc: jpegenc@1500a000 {
+      compatible = "mediatek,mt2701-jpgenc",
+                   "mediatek,mtk-jpgenc";
+      reg = <0x1500a000 0x1000>;
+      interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+      clocks =  <&imgsys CLK_IMG_VENC>;
+      clock-names = "jpgenc";
+      power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+      iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
+               <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index 0d03e3ae2be2..53ef26e2c857 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -25,10 +25,7 @@ Required properties (DMA function blocks, child node):
         "mediatek,mt8173-mdp-wdma"
         "mediatek,mt8173-mdp-wrot"
 - iommus: should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
-  for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
 
 Example:
@@ -40,7 +37,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-		mediatek,larb = <&larb0>;
 		mediatek,vpu = <&vpu>;
 	};
 
@@ -51,7 +47,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-		mediatek,larb = <&larb4>;
 	};
 
 	mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WDMA>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT0>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT1>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT1>;
-		mediatek,larb = <&larb4>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
deleted file mode 100644
index b6b5dde6abd8..000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ /dev/null
@@ -1,121 +0,0 @@
-Mediatek Video Codec
-
-Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
-supports high resolution encoding and decoding functionalities.
-
-Required properties:
-- compatible : "mediatek,mt8173-vcodec-enc" for encoder
-  "mediatek,mt8173-vcodec-dec" for decoder.
-- reg : Physical base address of the video codec registers and length of
-  memory mapped region.
-- interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
-- clocks : list of clock specifiers, corresponding to entries in
-  the clock-names property.
-- clock-names: encoder must contain "venc_sel_src", "venc_sel",,
-  "venc_lt_sel_src", "venc_lt_sel", decoder must contain "vcodecpll",
-  "univpll_d2", "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll",
-  "venc_lt_sel", "vdec_bus_clk_src".
-- iommus : should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
-  for details.
-- mediatek,vpu : the node of video processor unit
-
-
-Example:
-
-vcodec_dec: vcodec@16000000 {
-    compatible = "mediatek,mt8173-vcodec-dec";
-    reg = <0 0x16000000 0 0x100>,   /*VDEC_SYS*/
-          <0 0x16020000 0 0x1000>,  /*VDEC_MISC*/
-          <0 0x16021000 0 0x800>,   /*VDEC_LD*/
-          <0 0x16021800 0 0x800>,   /*VDEC_TOP*/
-          <0 0x16022000 0 0x1000>,  /*VDEC_CM*/
-          <0 0x16023000 0 0x1000>,  /*VDEC_AD*/
-          <0 0x16024000 0 0x1000>,  /*VDEC_AV*/
-          <0 0x16025000 0 0x1000>,  /*VDEC_PP*/
-          <0 0x16026800 0 0x800>,   /*VP8_VD*/
-          <0 0x16027000 0 0x800>,   /*VP6_VD*/
-          <0 0x16027800 0 0x800>,   /*VP8_VL*/
-          <0 0x16028400 0 0x400>;   /*VP9_VD*/
-    interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb1>;
-    iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
-    mediatek,vpu = <&vpu>;
-    power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
-    clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
-             <&topckgen CLK_TOP_UNIVPLL_D2>,
-             <&topckgen CLK_TOP_CCI400_SEL>,
-             <&topckgen CLK_TOP_VDEC_SEL>,
-             <&topckgen CLK_TOP_VCODECPLL>,
-             <&apmixedsys CLK_APMIXED_VENCPLL>,
-             <&topckgen CLK_TOP_VENC_LT_SEL>,
-             <&topckgen CLK_TOP_VCODECPLL_370P5>;
-    clock-names = "vcodecpll",
-                  "univpll_d2",
-                  "clk_cci400_sel",
-                  "vdec_sel",
-                  "vdecpll",
-                  "vencpll",
-                  "venc_lt_sel",
-                  "vdec_bus_clk_src";
-    assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
-                      <&topckgen CLK_TOP_CCI400_SEL>,
-                      <&topckgen CLK_TOP_VDEC_SEL>,
-                      <&apmixedsys CLK_APMIXED_VCODECPLL>,
-                      <&apmixedsys CLK_APMIXED_VENCPLL>;
-    assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
-                             <&topckgen CLK_TOP_UNIVPLL_D2>,
-                             <&topckgen CLK_TOP_VCODECPLL>;
-    assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
-  };
-
-  vcodec_enc: vcodec@18002000 {
-    compatible = "mediatek,mt8173-vcodec-enc";
-    reg = <0 0x18002000 0 0x1000>,    /*VENC_SYS*/
-          <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/
-    interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
-		 <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb3>,
-		    <&larb5>;
-    iommus = <&iommu M4U_PORT_VENC_RCPU>,
-             <&iommu M4U_PORT_VENC_REC>,
-             <&iommu M4U_PORT_VENC_BSDMA>,
-             <&iommu M4U_PORT_VENC_SV_COMV>,
-             <&iommu M4U_PORT_VENC_RD_COMV>,
-             <&iommu M4U_PORT_VENC_CUR_LUMA>,
-             <&iommu M4U_PORT_VENC_CUR_CHROMA>,
-             <&iommu M4U_PORT_VENC_REF_LUMA>,
-             <&iommu M4U_PORT_VENC_REF_CHROMA>,
-             <&iommu M4U_PORT_VENC_NBM_RDMA>,
-             <&iommu M4U_PORT_VENC_NBM_WDMA>,
-             <&iommu M4U_PORT_VENC_RCPU_SET2>,
-             <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
-             <&iommu M4U_PORT_VENC_BSDMA_SET2>,
-             <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
-             <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
-             <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
-             <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
-             <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
-             <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-    mediatek,vpu = <&vpu>;
-    clocks = <&topckgen CLK_TOP_VENCPLL_D2>,
-             <&topckgen CLK_TOP_VENC_SEL>,
-             <&topckgen CLK_TOP_UNIVPLL1_D2>,
-             <&topckgen CLK_TOP_VENC_LT_SEL>;
-    clock-names = "venc_sel_src",
-                  "venc_sel",
-                  "venc_lt_sel_src",
-                  "venc_lt_sel";
-    assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>,
-                      <&topckgen CLK_TOP_VENC_LT_SEL>;
-    assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>,
-                             <&topckgen CLK_TOP_UNIVPLL1_D2>;
-  };
diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
new file mode 100644
index 000000000000..b3a345fc6464
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/microchip,csi2dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip CSI2 Demux Controller (CSI2DC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+description:
+  CSI2DC - Camera Serial Interface 2 Demux Controller
+
+  CSI2DC is a hardware block that receives incoming data from either from an
+  IDI interface or from a parallel bus interface.
+  It filters IDI packets based on their data type and virtual channel
+  identifier, then converts the byte stream to a pixel stream into a cross
+  clock domain towards a parallel interface that can be read by a sensor
+  controller.
+  IDI interface is Synopsys proprietary.
+  CSI2DC can act a simple bypass bridge if the incoming data is coming from
+  a parallel interface.
+
+  CSI2DC provides two pipes, one video pipe and one data pipe. Video pipe
+  is connected at the output to a sensor controller and the data pipe is
+  accessible as a DMA slave port to a DMA controller.
+
+  CSI2DC supports a single 'port' node as a sink port with either Synopsys
+  32-bit IDI interface or a parallel interface.
+
+  CSI2DC supports one 'port' node as source port with parallel interface.
+  This is called video pipe.
+  This port has an 'endpoint' that can be connected to a sink port of another
+  controller (next in pipeline).
+
+  CSI2DC also supports direct access to the data through AHB, via DMA channel,
+  called data pipe.
+  For data pipe to be available, a dma controller and a dma channel must be
+  referenced.
+
+properties:
+  compatible:
+    const: microchip,sama7g5-csi2dc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    description:
+      CSI2DC must have two clocks to function correctly. One clock is the
+      peripheral clock for the inside functionality of the hardware block.
+      This is named 'pclk'. The second clock must be the cross domain clock,
+      in which CSI2DC will perform clock crossing. This clock must be fed
+      by the next controller in pipeline, which usually is a sensor controller.
+      Normally this clock should be given by this sensor controller who
+      is also a clock source. This clock is named 'scck', sensor controller clock.
+    items:
+      - const: pclk
+      - const: scck
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the input port.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+            description: Endpoint connected to input device
+
+            properties:
+              bus-type:
+                enum: [4, 5, 6]
+                default: 4
+
+              bus-width:
+                enum: [8, 9, 10, 11, 12, 13, 14]
+                default: 14
+
+              clock-noncontinuous:
+                type: boolean
+                description:
+                  Presence of this boolean property decides whether clock is
+                  continuous or noncontinuous.
+
+              remote-endpoint: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the output port.
+
+        properties:
+          endpoint:
+            unevaluatedProperties: false
+            $ref: video-interfaces.yaml#
+            description: Endpoint connected to output device
+
+            properties:
+              bus-type:
+                enum: [5, 6]
+                default: 5
+
+              bus-width:
+                enum: [8, 9, 10, 11, 12, 13, 14]
+                default: 14
+
+              remote-endpoint: true
+
+    required:
+      - port@0
+      - port@1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ports
+
+examples:
+  # Example for connecting to a parallel sensor controller block (video pipe)
+  # and the input is received from Synopsys IDI interface
+  - |
+    csi2dc@e1404000 {
+        compatible = "microchip,sama7g5-csi2dc";
+        reg = <0xe1404000 0x500>;
+        clocks = <&pclk>, <&scck>;
+        clock-names = "pclk", "scck";
+
+        ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               port@0 {
+                       reg = <0>; /* must be 0, first child port */
+                       csi2dc_in: endpoint { /* input from IDI interface */
+                               bus-type = <4>; /* MIPI CSI2 D-PHY */
+                               remote-endpoint = <&csi2host_out>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>; /* must be 1, second child port */
+                       csi2dc_out: endpoint {
+                               remote-endpoint = <&xisc_in>; /* output to sensor controller */
+                       };
+               };
+        };
+    };
+
+  # Example for connecting to a DMA master as an AHB slave
+  # and the input is received from Synopsys IDI interface
+  - |
+    #include <dt-bindings/dma/at91.h>
+    csi2dc@e1404000 {
+        compatible = "microchip,sama7g5-csi2dc";
+        reg = <0xe1404000 0x500>;
+        clocks = <&pclk>, <&scck>;
+        clock-names = "pclk", "scck";
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>;
+        dma-names = "rx";
+
+        ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               port@0 {
+                       reg = <0>; /* must be 0, first child port */
+                       csi2dc_input: endpoint { /* input from IDI interface */
+                               remote-endpoint = <&csi2host_out>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>;
+               };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml
new file mode 100644
index 000000000000..4b77103ca913
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/microchip,sama5d4-vdec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Hantro G1 VPU codec implemented on Microchip SAMA5D4 SoCs
+
+maintainers:
+  - Emil Velikov <emil.velikov@collabora.com>
+
+description:
+  Hantro G1 video decode accelerator present on Microchip SAMA5D4 SoCs.
+
+properties:
+  compatible:
+    const: microchip,sama5d4-vdec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/at91.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+
+        vdec0: vdec@300000 {
+                compatible = "microchip,sama5d4-vdec";
+                reg = <0x00300000 0x100000>;
+                interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+                clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+        };
diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
new file mode 100644
index 000000000000..8b37fccab5e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Microchip Technology, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/microchip,xisc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip eXtended Image Sensor Controller (XISC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+description: |
+  The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the
+  Microchip AT91 SAM family of devices.
+
+  The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video.
+  The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a
+  parallel sensor.
+
+  The XISC provides one clock output that is used to clock the demuxer/bridge.
+
+properties:
+  compatible:
+    const: microchip,sama7g5-isc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: hclock
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    const: isc-mck
+
+  microchip,mipi-mode:
+    type: boolean
+    description:
+      As the XISC is usually connected to a demux/bridge, the XISC receives
+      the same type of input, however, it should be aware of the type of
+      signals received. The mipi-mode enables different internal handling
+      of the data and clock lines.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description:
+      Input port node, single endpoint describing the input pad.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+
+          remote-endpoint: true
+
+          bus-width:
+            enum: [8, 9, 10, 11, 12, 14]
+            default: 12
+
+          hsync-active:
+            enum: [0, 1]
+            default: 1
+
+          vsync-active:
+            enum: [0, 1]
+            default: 1
+
+          pclk-sample:
+            enum: [0, 1]
+            default: 1
+
+        required:
+          - remote-endpoint
+          - bus-type
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - clock-output-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    xisc: xisc@e1408000 {
+        compatible = "microchip,sama7g5-isc";
+        reg = <0xe1408000 0x2000>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+        clock-names = "hclock";
+        #clock-cells = <0>;
+        clock-output-names = "isc-mck";
+
+        port {
+                xisc_in: endpoint {
+                       bus-type = <5>; /* Parallel */
+                       remote-endpoint = <&csi2dc_out>;
+                       hsync-active = <1>;
+                       vsync-active = <1>;
+                       bus-width = <12>;
+                };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
deleted file mode 100644
index 602169b8aa19..000000000000
--- a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-NVIDIA Tegra Video Decoder Engine
-
-Required properties:
-- compatible : Must contain one of the following values:
-   - "nvidia,tegra20-vde"
-   - "nvidia,tegra30-vde"
-   - "nvidia,tegra114-vde"
-   - "nvidia,tegra124-vde"
-   - "nvidia,tegra132-vde"
-- reg : Must contain an entry for each entry in reg-names.
-- reg-names : Must include the following entries:
-  - sxe
-  - bsev
-  - mbe
-  - ppe
-  - mce
-  - tfe
-  - ppb
-  - vdma
-  - frameid
-- iram : Must contain phandle to the mmio-sram device node that represents
-         IRAM region used by VDE.
-- interrupts : Must contain an entry for each entry in interrupt-names.
-- interrupt-names : Must include the following entries:
-  - sync-token
-  - bsev
-  - sxe
-- clocks : Must include the following entries:
-  - vde
-- resets : Must contain an entry for each entry in reset-names.
-- reset-names : Should include the following entries:
-  - vde
-
-Optional properties:
-- resets : Must contain an entry for each entry in reset-names.
-- reset-names : Must include the following entries:
-  - mc
-- iommus: Must contain phandle to the IOMMU device node.
-
-Example:
-
-video-codec@6001a000 {
-	compatible = "nvidia,tegra20-vde";
-	reg = <0x6001a000 0x1000 /* Syntax Engine */
-	       0x6001b000 0x1000 /* Video Bitstream Engine */
-	       0x6001c000  0x100 /* Macroblock Engine */
-	       0x6001c200  0x100 /* Post-processing Engine */
-	       0x6001c400  0x100 /* Motion Compensation Engine */
-	       0x6001c600  0x100 /* Transform Engine */
-	       0x6001c800  0x100 /* Pixel prediction block */
-	       0x6001ca00  0x100 /* Video DMA */
-	       0x6001d800  0x300 /* Video frame controls */>;
-	reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
-		    "tfe", "ppb", "vdma", "frameid";
-	iram = <&vde_pool>; /* IRAM region */
-	interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
-	interrupt-names = "sync-token", "bsev", "sxe";
-	clocks = <&tegra_car TEGRA20_CLK_VDE>;
-	reset-names = "vde", "mc";
-	resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>;
-	iommus = <&mc TEGRA_SWGROUP_VDE>;
-};
diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml
new file mode 100644
index 000000000000..4ecdee1be37e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nvidia,tegra-vde.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Decoder Engine
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra132-vde
+              - nvidia,tegra124-vde
+              - nvidia,tegra114-vde
+      - items:
+          - const: nvidia,tegra30-vde
+          - const: nvidia,tegra20-vde
+      - items:
+          - const: nvidia,tegra20-vde
+
+  reg:
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: sxe
+      - const: bsev
+      - const: mbe
+      - const: ppe
+      - const: mce
+      - const: tfe
+      - const: ppb
+      - const: vdma
+      - const: frameid
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: vde
+      - const: mc
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: sync-token
+      - const: bsev
+      - const: sxe
+
+  iommus:
+    maxItems: 1
+
+  iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of the SRAM MMIO node.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property,
+      which is a bitfield indicating SoC speedo or process ID mask.
+
+  power-domains:
+    maxItems: 1
+    description:
+      Phandle to the SoC core power domain.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - reset-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    video-codec@6001a000 {
+      compatible = "nvidia,tegra20-vde";
+      reg = <0x6001a000 0x1000>, /* Syntax Engine */
+            <0x6001b000 0x1000>, /* Video Bitstream Engine */
+            <0x6001c000  0x100>, /* Macroblock Engine */
+            <0x6001c200  0x100>, /* Post-processing Engine */
+            <0x6001c400  0x100>, /* Motion Compensation Engine */
+            <0x6001c600  0x100>, /* Transform Engine */
+            <0x6001c800  0x100>, /* Pixel prediction block */
+            <0x6001ca00  0x100>, /* Video DMA */
+            <0x6001d800  0x300>; /* Video frame controls */
+      reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+                  "tfe", "ppb", "vdma", "frameid";
+      iram = <&iram>; /* IRAM MMIO region */
+      interrupts = <0  9 4>, /* Sync token */
+                   <0 10 4>, /* BSE-V */
+                   <0 12 4>; /* SXE */
+      interrupt-names = "sync-token", "bsev", "sxe";
+      clocks = <&clk 61>;
+      reset-names = "vde", "mc";
+      resets = <&rst 61>, <&mem 13>;
+      iommus = <&mem 15>;
+      operating-points-v2 = <&dvfs_opp_table>;
+      power-domains = <&domain>;
+    };
diff --git a/Documentation/devicetree/bindings/media/nxp,dw100.yaml b/Documentation/devicetree/bindings/media/nxp,dw100.yaml
new file mode 100644
index 000000000000..21910ff0e1c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,dw100.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,dw100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP DW100 Dewarper core
+
+maintainers:
+  - Xavier Roumegue <xavier.roumegue@oss.nxp.com>
+
+description: |-
+  The Dewarp Engine provides high-performance dewarp processing for the
+  correction of the distortion that is introduced in images produced by fisheye
+  and wide angle lenses. It is implemented with a line/tile-cache based
+  architecture. With configurable address mapping look up tables and per tile
+  processing, it successfully generates a corrected output image.
+  The engine can be used to perform scaling, cropping and pixel format
+  conversion.
+
+properties:
+  compatible:
+    enum:
+      - nxp,imx8mp-dw100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The AXI clock
+      - description: The AHB clock
+
+  clock-names:
+    items:
+      - const: axi
+      - const: ahb
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    dewarp: dwe@32e30000 {
+            compatible = "nxp,imx8mp-dw100";
+            reg = <0x32e30000 0x10000>;
+            interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+                     <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+            clock-names = "axi", "ahb";
+            power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_DWE>;
+    };
diff --git a/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
new file mode 100644
index 000000000000..03a23a26c4f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver
+
+maintainers:
+  - Rui Miguel Silva <rmfrfs@gmail.com>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2
+  receiver IP core named CSIS. The IP core originates from Samsung, and may be
+  compatible with some of the Exynos4 and S5P SoCs. i.MX7 SoCs use CSIS version
+  3.3, and i.MX8 SoCs use CSIS version 3.6.3.
+
+  While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is
+  completely wrapped by the CSIS and doesn't expose a control interface of its
+  own. This binding thus covers both IP cores.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx7-mipi-csi2
+          - fsl,imx8mm-mipi-csi2
+      - items:
+          - enum:
+              - fsl,imx8mp-mipi-csi2
+          - const: fsl,imx8mm-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description: The peripheral clock (a.k.a. APB clock)
+      - description: The external clock (optionally used as the pixel clock)
+      - description: The MIPI D-PHY clock
+      - description: The AXI clock
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: pclk
+      - const: wrap
+      - const: phy
+      - const: axi
+
+  power-domains:
+    maxItems: 1
+
+  phy-supply:
+    description: The MIPI D-PHY digital power supply
+
+  resets:
+    items:
+      - description: MIPI D-PHY slave reset
+
+  clock-frequency:
+    description: The desired external clock ("wrap") frequency, in Hz
+    default: 166000000
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx7-mipi-csi2
+    then:
+      required:
+        - phy-supply
+        - resets
+    else:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          minItems: 4
+        phy-supply: false
+        resets: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7d-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/reset/imx7-reset.h>
+
+    mipi-csi@30750000 {
+        compatible = "fsl,imx7-mipi-csi2";
+        reg = <0x30750000 0x10000>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+                 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
+                 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+        clock-names = "pclk", "wrap", "phy";
+        clock-frequency = <166000000>;
+
+        power-domains = <&pgc_mipi_phy>;
+        phy-supply = <&reg_1p0d>;
+        resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                mipi_from_sensor: endpoint {
+                    remote-endpoint = <&ov2680_to_mipi>;
+                    data-lanes = <1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                mipi_vc0_to_csi_mux: endpoint {
+                    remote-endpoint = <&csi_mux_from_mipi_vc0>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mipi-csi@32e30000 {
+        compatible = "fsl,imx8mm-mipi-csi2";
+        reg = <0x32e30000 0x1000>;
+        interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+        clock-frequency = <333000000>;
+        clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+                 <&clk IMX8MM_CLK_CSI1_ROOT>,
+                 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
+                 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+        clock-names = "pclk", "wrap", "phy", "axi";
+        power-domains = <&mipi_pd>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                imx8mm_mipi_csi_in: endpoint {
+                    remote-endpoint = <&imx477_out>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                imx8mm_mipi_csi_out: endpoint {
+                    remote-endpoint = <&csi_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
new file mode 100644
index 000000000000..4f7b78265336
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX7 and i.MX8 CSI bridge (CMOS Sensor Interface)
+
+maintainers:
+  - Rui Miguel Silva <rmfrfs@gmail.com>
+
+description: |
+  This is device node for the CMOS Sensor Interface (CSI) which enables the
+  chip to connect directly to external CMOS image sensors.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8mq-csi
+          - fsl,imx7-csi
+          - fsl,imx6ul-csi
+      - items:
+          - const: fsl,imx8mm-csi
+          - const: fsl,imx7-csi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7d-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    csi: csi@30710000 {
+            compatible = "fsl,imx7-csi";
+            reg = <0x30710000 0x10000>;
+            interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
+            clock-names = "mclk";
+
+            port {
+                    csi_from_csi_mux: endpoint {
+                            remote-endpoint = <&csi_mux_to_csi>;
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
new file mode 100644
index 000000000000..3d9d1db37040
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8QXP/QM JPEG decoder/encoder
+
+maintainers:
+  - Mirela Rabulea <mirela.rabulea@nxp.com>
+
+description: |-
+  The JPEG decoder/encoder present in iMX8QXP and iMX8QM SoCs is an
+  ISO/IEC 10918-1 JPEG standard compliant decoder/encoder, for Baseline
+  and Extended Sequential DCT modes.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          enum:
+            - nxp,imx8qxp-jpgdec
+            - nxp,imx8qxp-jpgenc
+      - items:
+          - const: nxp,imx8qm-jpgdec
+          - const: nxp,imx8qxp-jpgdec
+      - items:
+          - const: nxp,imx8qm-jpgenc
+          - const: nxp,imx8qxp-jpgenc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      There are 4 slots available in the IP, which the driver may use
+      If a certain slot is used, it should have an associated interrupt
+      The interrupt with index i is assumed to be for slot i
+    minItems: 1               # At least one slot is needed by the driver
+    maxItems: 4               # The IP has 4 slots available for use
+
+  power-domains:
+    description:
+      List of phandle and PM domain specifier as documented in
+      Documentation/devicetree/bindings/power/power_domain.txt
+    minItems: 2               # Wrapper and 1 slot
+    maxItems: 5               # Wrapper and 4 slots
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    jpegdec: jpegdec@58400000 {
+        compatible = "nxp,imx8qxp-jpgdec";
+        reg = <0x58400000 0x00050000 >;
+        interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
+                        <&pd IMX_SC_R_MJPEG_DEC_S0>,
+                        <&pd IMX_SC_R_MJPEG_DEC_S1>,
+                        <&pd IMX_SC_R_MJPEG_DEC_S2>,
+                        <&pd IMX_SC_R_MJPEG_DEC_S3>;
+    };
+
+    jpegenc: jpegenc@58450000 {
+        compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
+        reg = <0x58450000 0x00050000 >;
+        interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
+                        <&pd IMX_SC_R_MJPEG_ENC_S0>,
+                        <&pd IMX_SC_R_MJPEG_ENC_S1>,
+                        <&pd IMX_SC_R_MJPEG_ENC_S2>,
+                        <&pd IMX_SC_R_MJPEG_ENC_S3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
new file mode 100644
index 000000000000..2a14e3b0e004
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MQ MIPI CSI-2 receiver
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@puri.sm>
+
+description: |-
+  This binding covers the CSI-2 RX PHY and host controller included in the
+  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
+  input imaging devices.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: core is the RX Controller Core Clock input. This clock
+                     must be exactly equal to or faster than the receive
+                     byteclock from the RX DPHY.
+      - description: esc is the Rx Escape Clock. This must be the same escape
+                     clock that the RX DPHY receives.
+      - description: ui is the pixel clock (phy_ref up to 333Mhz).
+                     See the reference manual for details.
+
+  clock-names:
+    items:
+      - const: core
+      - const: esc
+      - const: ui
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CORE_RESET reset register bit definition
+      - description: PHY_REF_RESET reset register bit definition
+      - description: ESC_RESET reset register bit definition
+
+  fsl,mipi-phy-gpr:
+    description: |
+      The phandle to the imx8mq syscon iomux-gpr with the register
+      for setting RX_ENABLE for the mipi receiver.
+
+      The format should be as follows:
+      <gpr req_gpr>
+      gpr is the phandle to general purpose register node.
+      req_gpr is the gpr register offset of RX_ENABLE for the mipi phy.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: The 'gpr' is the phandle to general purpose register node.
+          - description: The 'req_gpr' is the gpr register offset containing
+                        CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
+            maximum: 0xff
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    const: dram
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - fsl,mipi-phy-gpr
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interconnect/imx8mq.h>
+    #include <dt-bindings/reset/imx8mq-reset.h>
+
+    csi@30a70000 {
+        compatible = "fsl,imx8mq-mipi-csi2";
+        reg = <0x30a70000 0x1000>;
+        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                 <&clk IMX8MQ_CLK_CSI1_ESC>,
+                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
+        clock-names = "core", "esc", "ui";
+        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+                          <&clk IMX8MQ_CLK_CSI1_ESC>;
+        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
+        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
+                                 <&clk IMX8MQ_SYS1_PLL_800M>;
+        power-domains = <&pgc_mipi_csi1>;
+        resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
+                 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
+                 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
+        fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
+        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+        interconnect-names = "dram";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                imx8mm_mipi_csi_in: endpoint {
+                    remote-endpoint = <&imx477_out>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                imx8mm_mipi_csi_out: endpoint {
+                    remote-endpoint = <&csi_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
new file mode 100644
index 000000000000..7dc13a4b1805
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Hantro G1/G2 VPU codecs implemented on i.MX8M SoCs
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  Hantro G1/G2 video decode accelerators present on i.MX8MQ SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - const: nxp,imx8mq-vpu
+        deprecated: true
+      - const: nxp,imx8mq-vpu-g1
+      - const: nxp,imx8mq-vpu-g2
+      - const: nxp,imx8mm-vpu-g1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/imx8mq-clock.h>
+        #include <dt-bindings/power/imx8mq-power.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        vpu_g1: video-codec@38300000 {
+                compatible = "nxp,imx8mq-vpu-g1";
+                reg = <0x38300000 0x10000>;
+                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
+                power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
+        };
+  - |
+        #include <dt-bindings/clock/imx8mq-clock.h>
+        #include <dt-bindings/power/imx8mq-power.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        vpu_g2: video-codec@38300000 {
+                compatible = "nxp,imx8mq-vpu-g2";
+                reg = <0x38310000 0x10000>;
+                interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+                power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
+        };
diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt
deleted file mode 100644
index 09eb6ed99114..000000000000
--- a/Documentation/devicetree/bindings/media/qcom,camss.txt
+++ /dev/null
@@ -1,229 +0,0 @@
-Qualcomm Camera Subsystem
-
-* Properties
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Should contain one of:
-		- "qcom,msm8916-camss"
-		- "qcom,msm8996-camss"
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Register ranges as listed in the reg-names property.
-- reg-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Should contain the following entries:
-		- "csiphy0"
-		- "csiphy0_clk_mux"
-		- "csiphy1"
-		- "csiphy1_clk_mux"
-		- "csiphy2"		(8996 only)
-		- "csiphy2_clk_mux"	(8996 only)
-		- "csid0"
-		- "csid1"
-		- "csid2"		(8996 only)
-		- "csid3"		(8996 only)
-		- "ispif"
-		- "csi_clk_mux"
-		- "vfe0"
-		- "vfe1"		(8996 only)
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Interrupts as listed in the interrupt-names property.
-- interrupt-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Should contain the following entries:
-		- "csiphy0"
-		- "csiphy1"
-		- "csiphy2"		(8996 only)
-		- "csid0"
-		- "csid1"
-		- "csid2"		(8996 only)
-		- "csid3"		(8996 only)
-		- "ispif"
-		- "vfe0"
-		- "vfe1"		(8996 only)
-- power-domains:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: A phandle and power domain specifier pairs to the
-		    power domain which is responsible for collapsing
-		    and restoring power to the peripheral.
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: A list of phandle and clock specifier pairs as listed
-		    in clock-names property.
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Should contain the following entries:
-		- "top_ahb"
-		- "ispif_ahb"
-		- "csiphy0_timer"
-		- "csiphy1_timer"
-		- "csiphy2_timer"	(8996 only)
-		- "csi0_ahb"
-		- "csi0"
-		- "csi0_phy"
-		- "csi0_pix"
-		- "csi0_rdi"
-		- "csi1_ahb"
-		- "csi1"
-		- "csi1_phy"
-		- "csi1_pix"
-		- "csi1_rdi"
-		- "csi2_ahb"		(8996 only)
-		- "csi2"		(8996 only)
-		- "csi2_phy"		(8996 only)
-		- "csi2_pix"		(8996 only)
-		- "csi2_rdi"		(8996 only)
-		- "csi3_ahb"		(8996 only)
-		- "csi3"		(8996 only)
-		- "csi3_phy"		(8996 only)
-		- "csi3_pix"		(8996 only)
-		- "csi3_rdi"		(8996 only)
-		- "ahb"
-		- "vfe0"
-		- "csi_vfe0"
-		- "vfe0_ahb",		(8996 only)
-		- "vfe0_stream",	(8996 only)
-		- "vfe1",		(8996 only)
-		- "csi_vfe1",		(8996 only)
-		- "vfe1_ahb",		(8996 only)
-		- "vfe1_stream",	(8996 only)
-		- "vfe_ahb"
-		- "vfe_axi"
-- vdda-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: A phandle to voltage supply for CSI2.
-- iommus:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: A list of phandle and IOMMU specifier pairs.
-
-* Nodes
-
-- ports:
-	Usage: required
-	Definition: As described in video-interfaces.txt in same directory.
-	Properties:
-		- reg:
-			Usage: required
-			Value type: <u32>
-			Definition: Selects CSI2 PHY interface - PHY0, PHY1
-				    or PHY2 (8996 only)
-	Endpoint node properties:
-		- clock-lanes:
-			Usage: required
-			Value type: <u32>
-			Definition: The physical clock lane index. On 8916
-				    the value must always be <1> as the physical
-				    clock lane is lane 1. On 8996 the value must
-				    always be <7> as the hardware supports D-PHY
-				    and C-PHY, indexes are in a common set and
-				    D-PHY physical clock lane is labeled as 7.
-		- data-lanes:
-			Usage: required
-			Value type: <prop-encoded-array>
-			Definition: An array of physical data lanes indexes.
-				    Position of an entry determines the logical
-				    lane number, while the value of an entry
-				    indicates physical lane index. Lane swapping
-				    is supported. Physical lane indexes for
-				    8916: 0, 2, 3, 4; for 8996: 0, 1, 2, 3.
-
-* An Example
-
-	camss: camss@1b00000 {
-		compatible = "qcom,msm8916-camss";
-		reg = <0x1b0ac00 0x200>,
-			<0x1b00030 0x4>,
-			<0x1b0b000 0x200>,
-			<0x1b00038 0x4>,
-			<0x1b08000 0x100>,
-			<0x1b08400 0x100>,
-			<0x1b0a000 0x500>,
-			<0x1b00020 0x10>,
-			<0x1b10000 0x1000>;
-		reg-names = "csiphy0",
-			"csiphy0_clk_mux",
-			"csiphy1",
-			"csiphy1_clk_mux",
-			"csid0",
-			"csid1",
-			"ispif",
-			"csi_clk_mux",
-			"vfe0";
-		interrupts = <GIC_SPI 78 0>,
-			<GIC_SPI 79 0>,
-			<GIC_SPI 51 0>,
-			<GIC_SPI 52 0>,
-			<GIC_SPI 55 0>,
-			<GIC_SPI 57 0>;
-		interrupt-names = "csiphy0",
-			"csiphy1",
-			"csid0",
-			"csid1",
-			"ispif",
-			"vfe0";
-		power-domains = <&gcc VFE_GDSC>;
-		clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
-			<&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
-			<&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
-			<&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
-			<&gcc GCC_CAMSS_CSI0_AHB_CLK>,
-			<&gcc GCC_CAMSS_CSI0_CLK>,
-			<&gcc GCC_CAMSS_CSI0PHY_CLK>,
-			<&gcc GCC_CAMSS_CSI0PIX_CLK>,
-			<&gcc GCC_CAMSS_CSI0RDI_CLK>,
-			<&gcc GCC_CAMSS_CSI1_AHB_CLK>,
-			<&gcc GCC_CAMSS_CSI1_CLK>,
-			<&gcc GCC_CAMSS_CSI1PHY_CLK>,
-			<&gcc GCC_CAMSS_CSI1PIX_CLK>,
-			<&gcc GCC_CAMSS_CSI1RDI_CLK>,
-			<&gcc GCC_CAMSS_AHB_CLK>,
-			<&gcc GCC_CAMSS_VFE0_CLK>,
-			<&gcc GCC_CAMSS_CSI_VFE0_CLK>,
-			<&gcc GCC_CAMSS_VFE_AHB_CLK>,
-			<&gcc GCC_CAMSS_VFE_AXI_CLK>;
-		clock-names = "top_ahb",
-			"ispif_ahb",
-			"csiphy0_timer",
-			"csiphy1_timer",
-			"csi0_ahb",
-			"csi0",
-			"csi0_phy",
-			"csi0_pix",
-			"csi0_rdi",
-			"csi1_ahb",
-			"csi1",
-			"csi1_phy",
-			"csi1_pix",
-			"csi1_rdi",
-			"ahb",
-			"vfe0",
-			"csi_vfe0",
-			"vfe_ahb",
-			"vfe_axi";
-		vdda-supply = <&pm8916_l2>;
-		iommus = <&apps_iommu 3>;
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				csiphy0_ep: endpoint {
-					clock-lanes = <1>;
-					data-lanes = <0 2>;
-					remote-endpoint = <&ov5645_ep>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
new file mode 100644
index 000000000000..12ec3e1ea869
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
@@ -0,0 +1,246 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,msm8916-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+  - Todor Tomov <todor.too@gmail.com>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,msm8916-camss
+
+  clocks:
+    minItems: 19
+    maxItems: 19
+
+  clock-names:
+    items:
+      - const: top_ahb
+      - const: ispif_ahb
+      - const: csiphy0_timer
+      - const: csiphy1_timer
+      - const: csi0_ahb
+      - const: csi0
+      - const: csi0_phy
+      - const: csi0_pix
+      - const: csi0_rdi
+      - const: csi1_ahb
+      - const: csi1
+      - const: csi1_phy
+      - const: csi1_pix
+      - const: csi1_rdi
+      - const: ahb
+      - const: vfe0
+      - const: csi_vfe0
+      - const: vfe_ahb
+      - const: vfe_axi
+
+  interrupts:
+    minItems: 6
+    maxItems: 6
+
+  interrupt-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csid0
+      - const: csid1
+      - const: ispif
+      - const: vfe0
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: VFE GDSC - Video Front End, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  An array of physical data lanes indexes.
+                  Position of an entry determines the logical
+                  lane number, while the value of an entry
+                  indicates physical lane index. Lane swapping
+                  is supported. Physical lane indexes;
+                  0, 2, 3, 4.
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+  reg:
+    minItems: 9
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy0_clk_mux
+      - const: csiphy1
+      - const: csiphy1_clk_mux
+      - const: csid0
+      - const: csid1
+      - const: ispif
+      - const: csi_clk_mux
+      - const: vfe0
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupt-names
+  - interrupts
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+    camss: camss@1b00000 {
+      compatible = "qcom,msm8916-camss";
+
+      clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+        <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+        <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+        <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+        <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+        <&gcc GCC_CAMSS_CSI0_CLK>,
+        <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+        <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+        <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+        <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+        <&gcc GCC_CAMSS_CSI1_CLK>,
+        <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+        <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+        <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+        <&gcc GCC_CAMSS_AHB_CLK>,
+        <&gcc GCC_CAMSS_VFE0_CLK>,
+        <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+        <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+        <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+
+      clock-names = "top_ahb",
+        "ispif_ahb",
+        "csiphy0_timer",
+        "csiphy1_timer",
+        "csi0_ahb",
+        "csi0",
+        "csi0_phy",
+        "csi0_pix",
+        "csi0_rdi",
+        "csi1_ahb",
+        "csi1",
+        "csi1_phy",
+        "csi1_pix",
+        "csi1_rdi",
+        "ahb",
+        "vfe0",
+        "csi_vfe0",
+        "vfe_ahb",
+        "vfe_axi";
+
+      interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+
+      interrupt-names = "csiphy0",
+        "csiphy1",
+        "csid0",
+        "csid1",
+        "ispif",
+        "vfe0";
+
+      iommus = <&apps_iommu 3>;
+
+      power-domains = <&gcc VFE_GDSC>;
+
+      reg = <0x01b0ac00 0x200>,
+        <0x01b00030 0x4>,
+        <0x01b0b000 0x200>,
+        <0x01b00038 0x4>,
+        <0x01b08000 0x100>,
+        <0x01b08400 0x100>,
+        <0x01b0a000 0x500>,
+        <0x01b00020 0x10>,
+        <0x01b10000 0x1000>;
+
+      reg-names = "csiphy0",
+        "csiphy0_clk_mux",
+        "csiphy1",
+        "csiphy1_clk_mux",
+        "csid0",
+        "csid1",
+        "ispif",
+        "csi_clk_mux",
+        "vfe0";
+
+      vdda-supply = <&reg_2v8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
new file mode 100644
index 000000000000..2abb7d21c0d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,msm8916-venus.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,msm8916-venus
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+
+  iommus:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: "venus-decoder"
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: "venus-encoder"
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-firmware:
+    type: object
+    additionalProperties: false
+
+    description: |
+      Firmware subnode is needed when the platform does not
+      have TrustZone.
+
+    properties:
+      iommus:
+        maxItems: 1
+
+    required:
+      - iommus
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - clock-names
+  - iommus
+  - memory-region
+  - video-decoder
+  - video-encoder
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+        video-codec@1d00000 {
+                compatible = "qcom,msm8916-venus";
+                reg = <0x01d00000 0xff000>;
+                interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+                        <&gcc GCC_VENUS0_AHB_CLK>,
+                        <&gcc GCC_VENUS0_AXI_CLK>;
+                clock-names = "core", "iface", "bus";
+                power-domains = <&gcc VENUS_GDSC>;
+                iommus = <&apps_iommu 5>;
+                memory-region = <&venus_mem>;
+
+                video-decoder {
+                        compatible = "venus-decoder";
+                };
+
+                video-encoder {
+                        compatible = "venus-encoder";
+                };
+        };
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
new file mode 100644
index 000000000000..6aeb3d6d02d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
@@ -0,0 +1,367 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+  - Todor Tomov <todor.too@gmail.com>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,msm8996-camss
+
+  clocks:
+    minItems: 36
+    maxItems: 36
+
+  clock-names:
+    items:
+      - const: top_ahb
+      - const: ispif_ahb
+      - const: csiphy0_timer
+      - const: csiphy1_timer
+      - const: csiphy2_timer
+      - const: csi0_ahb
+      - const: csi0
+      - const: csi0_phy
+      - const: csi0_pix
+      - const: csi0_rdi
+      - const: csi1_ahb
+      - const: csi1
+      - const: csi1_phy
+      - const: csi1_pix
+      - const: csi1_rdi
+      - const: csi2_ahb
+      - const: csi2
+      - const: csi2_phy
+      - const: csi2_pix
+      - const: csi2_rdi
+      - const: csi3_ahb
+      - const: csi3
+      - const: csi3_phy
+      - const: csi3_pix
+      - const: csi3_rdi
+      - const: ahb
+      - const: vfe0
+      - const: csi_vfe0
+      - const: vfe0_ahb
+      - const: vfe0_stream
+      - const: vfe1
+      - const: csi_vfe1
+      - const: vfe1_ahb
+      - const: vfe1_stream
+      - const: vfe_ahb
+      - const: vfe_axi
+
+  interrupts:
+    minItems: 10
+    maxItems: 10
+
+  interrupt-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: ispif
+      - const: vfe0
+      - const: vfe1
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    items:
+      - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller.
+      - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  An array of physical data lanes indexes.
+                  Position of an entry determines the logical
+                  lane number, while the value of an entry
+                  indicates physical lane index. Lane swapping
+                  is supported. Physical lane indexes are;
+                  0, 1, 2, 3
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+  reg:
+    minItems: 14
+    maxItems: 14
+
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy0_clk_mux
+      - const: csiphy1
+      - const: csiphy1_clk_mux
+      - const: csiphy2
+      - const: csiphy2_clk_mux
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: ispif
+      - const: csi_clk_mux
+      - const: vfe0
+      - const: vfe1
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupt-names
+  - interrupts
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+
+    camss: camss@a00000 {
+      compatible = "qcom,msm8996-camss";
+
+      clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+        <&mmcc CAMSS_ISPIF_AHB_CLK>,
+        <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+        <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+        <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+        <&mmcc CAMSS_CSI0_AHB_CLK>,
+        <&mmcc CAMSS_CSI0_CLK>,
+        <&mmcc CAMSS_CSI0PHY_CLK>,
+        <&mmcc CAMSS_CSI0PIX_CLK>,
+        <&mmcc CAMSS_CSI0RDI_CLK>,
+        <&mmcc CAMSS_CSI1_AHB_CLK>,
+        <&mmcc CAMSS_CSI1_CLK>,
+        <&mmcc CAMSS_CSI1PHY_CLK>,
+        <&mmcc CAMSS_CSI1PIX_CLK>,
+        <&mmcc CAMSS_CSI1RDI_CLK>,
+        <&mmcc CAMSS_CSI2_AHB_CLK>,
+        <&mmcc CAMSS_CSI2_CLK>,
+        <&mmcc CAMSS_CSI2PHY_CLK>,
+        <&mmcc CAMSS_CSI2PIX_CLK>,
+        <&mmcc CAMSS_CSI2RDI_CLK>,
+        <&mmcc CAMSS_CSI3_AHB_CLK>,
+        <&mmcc CAMSS_CSI3_CLK>,
+        <&mmcc CAMSS_CSI3PHY_CLK>,
+        <&mmcc CAMSS_CSI3PIX_CLK>,
+        <&mmcc CAMSS_CSI3RDI_CLK>,
+        <&mmcc CAMSS_AHB_CLK>,
+        <&mmcc CAMSS_VFE0_CLK>,
+        <&mmcc CAMSS_CSI_VFE0_CLK>,
+        <&mmcc CAMSS_VFE0_AHB_CLK>,
+        <&mmcc CAMSS_VFE0_STREAM_CLK>,
+        <&mmcc CAMSS_VFE1_CLK>,
+        <&mmcc CAMSS_CSI_VFE1_CLK>,
+        <&mmcc CAMSS_VFE1_AHB_CLK>,
+        <&mmcc CAMSS_VFE1_STREAM_CLK>,
+        <&mmcc CAMSS_VFE_AHB_CLK>,
+        <&mmcc CAMSS_VFE_AXI_CLK>;
+
+      clock-names = "top_ahb",
+        "ispif_ahb",
+        "csiphy0_timer",
+        "csiphy1_timer",
+        "csiphy2_timer",
+        "csi0_ahb",
+        "csi0",
+        "csi0_phy",
+        "csi0_pix",
+        "csi0_rdi",
+        "csi1_ahb",
+        "csi1",
+        "csi1_phy",
+        "csi1_pix",
+        "csi1_rdi",
+        "csi2_ahb",
+        "csi2",
+        "csi2_phy",
+        "csi2_pix",
+        "csi2_rdi",
+        "csi3_ahb",
+        "csi3",
+        "csi3_phy",
+        "csi3_pix",
+        "csi3_rdi",
+        "ahb",
+        "vfe0",
+        "csi_vfe0",
+        "vfe0_ahb",
+        "vfe0_stream",
+        "vfe1",
+        "csi_vfe1",
+        "vfe1_ahb",
+        "vfe1_stream",
+        "vfe_ahb",
+        "vfe_axi";
+
+      interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+
+      interrupt-names = "csiphy0",
+        "csiphy1",
+        "csiphy2",
+        "csid0",
+        "csid1",
+        "csid2",
+        "csid3",
+        "ispif",
+        "vfe0",
+        "vfe1";
+
+      iommus = <&vfe_smmu 0>,
+         <&vfe_smmu 1>,
+         <&vfe_smmu 2>,
+         <&vfe_smmu 3>;
+
+      power-domains = <&mmcc VFE0_GDSC>,
+        <&mmcc VFE1_GDSC>;
+
+      reg = <0x00a34000 0x1000>,
+        <0x00a00030 0x4>,
+        <0x00a35000 0x1000>,
+        <0x00a00038 0x4>,
+        <0x00a36000 0x1000>,
+        <0x00a00040 0x4>,
+        <0x00a30000 0x100>,
+        <0x00a30400 0x100>,
+        <0x00a30800 0x100>,
+        <0x00a30c00 0x100>,
+        <0x00a31000 0x500>,
+        <0x00a00020 0x10>,
+        <0x00a10000 0x1000>,
+        <0x00a14000 0x1000>;
+
+      reg-names = "csiphy0",
+        "csiphy0_clk_mux",
+        "csiphy1",
+        "csiphy1_clk_mux",
+        "csiphy2",
+        "csiphy2_clk_mux",
+        "csid0",
+        "csid1",
+        "csid2",
+        "csid3",
+        "ispif",
+        "csi_clk_mux",
+        "vfe0",
+        "vfe1";
+
+      vdda-supply = <&reg_2v8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
new file mode 100644
index 000000000000..29d0cb6c6ebe
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,msm8996-venus.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,msm8996-venus
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+      - const: mbus
+
+  iommus:
+    maxItems: 20
+
+  memory-region:
+    maxItems: 1
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: core
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: core
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+  video-firmware:
+    type: object
+    additionalProperties: false
+
+    description: |
+      Firmware subnode is needed when the platform does not
+      have TrustZone.
+
+    properties:
+      iommus:
+        maxItems: 1
+
+    required:
+      - iommus
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - clock-names
+  - iommus
+  - memory-region
+  - video-decoder
+  - video-encoder
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+
+        video-codec@c00000 {
+                compatible = "qcom,msm8996-venus";
+                reg = <0x00c00000 0xff000>;
+                interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&mmcc VIDEO_CORE_CLK>,
+                         <&mmcc VIDEO_AHB_CLK>,
+                         <&mmcc VIDEO_AXI_CLK>,
+                         <&mmcc VIDEO_MAXI_CLK>;
+                clock-names = "core", "iface", "bus", "mbus";
+                power-domains = <&mmcc VENUS_GDSC>;
+                iommus =  <&venus_smmu 0x00>,
+                          <&venus_smmu 0x01>,
+                          <&venus_smmu 0x0a>,
+                          <&venus_smmu 0x07>,
+                          <&venus_smmu 0x0e>,
+                          <&venus_smmu 0x0f>,
+                          <&venus_smmu 0x08>,
+                          <&venus_smmu 0x09>,
+                          <&venus_smmu 0x0b>,
+                          <&venus_smmu 0x0c>,
+                          <&venus_smmu 0x0d>,
+                          <&venus_smmu 0x10>,
+                          <&venus_smmu 0x11>,
+                          <&venus_smmu 0x21>,
+                          <&venus_smmu 0x28>,
+                          <&venus_smmu 0x29>,
+                          <&venus_smmu 0x2b>,
+                          <&venus_smmu 0x2c>,
+                          <&venus_smmu 0x2d>,
+                          <&venus_smmu 0x31>;
+                memory-region = <&venus_mem>;
+
+                video-decoder {
+                        compatible = "venus-decoder";
+                        clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+                        clock-names = "core";
+                        power-domains = <&mmcc VENUS_CORE0_GDSC>;
+                };
+
+                video-encoder {
+                        compatible = "venus-encoder";
+                        clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+                        clock-names = "core";
+                        power-domains = <&mmcc VENUS_CORE1_GDSC>;
+                };
+        };
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
new file mode 100644
index 000000000000..42ee3f06c6be
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sc7180-venus.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sc7180-venus
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    minItems: 2
+    maxItems: 3
+
+  power-domain-names:
+    minItems: 2
+    items:
+      - const: venus
+      - const: vcodec0
+      - const: cx
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+      - const: vcodec0_core
+      - const: vcodec0_bus
+
+  iommus:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: video-mem
+      - const: cpu-cfg
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-firmware:
+    type: object
+    additionalProperties: false
+
+    description: |
+      Firmware subnode is needed when the platform does not
+      have TrustZone.
+
+    properties:
+      iommus:
+        maxItems: 1
+
+    required:
+      - iommus
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+  - iommus
+  - memory-region
+  - video-decoder
+  - video-encoder
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/clock/qcom,videocc-sc7180.h>
+
+        venus: video-codec@aa00000 {
+                compatible = "qcom,sc7180-venus";
+                reg = <0x0aa00000 0xff000>;
+                interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+                power-domains = <&videocc VENUS_GDSC>,
+                                <&videocc VCODEC0_GDSC>;
+                power-domain-names = "venus", "vcodec0";
+                clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                         <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                         <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+                         <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+                         <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+                clock-names = "core", "iface", "bus",
+                              "vcodec0_core", "vcodec0_bus";
+                iommus = <&apps_smmu 0x0c00 0x60>;
+                memory-region = <&venus_mem>;
+
+                video-decoder {
+                        compatible = "venus-decoder";
+                };
+
+                video-encoder {
+                        compatible = "venus-encoder";
+                };
+        };
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
new file mode 100644
index 000000000000..cf361dd9de08
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sc7280-venus.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus Iris2 IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sc7280-venus
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    minItems: 2
+    maxItems: 3
+
+  power-domain-names:
+    minItems: 2
+    items:
+      - const: venus
+      - const: vcodec0
+      - const: cx
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: core
+      - const: bus
+      - const: iface
+      - const: vcodec_core
+      - const: vcodec_bus
+
+  iommus:
+    maxItems: 2
+
+  memory-region:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: cpu-cfg
+      - const: video-mem
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-firmware:
+    type: object
+    additionalProperties: false
+
+    description: |
+      Firmware subnode is needed when the platform does not
+      have TrustZone.
+
+    properties:
+      iommus:
+        maxItems: 1
+
+    required:
+      - iommus
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+  - iommus
+  - memory-region
+  - video-decoder
+  - video-encoder
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/clock/qcom,videocc-sc7280.h>
+        #include <dt-bindings/interconnect/qcom,sc7280.h>
+        #include <dt-bindings/power/qcom-rpmpd.h>
+
+        venus: video-codec@aa00000 {
+                compatible = "qcom,sc7280-venus";
+                reg = <0x0aa00000 0xd0600>;
+                interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+                clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>,
+                         <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>,
+                         <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                         <&videocc VIDEO_CC_MVS0_CORE_CLK>,
+                         <&videocc VIDEO_CC_MVS0_AXI_CLK>;
+                clock-names = "core", "bus", "iface",
+                              "vcodec_core", "vcodec_bus";
+
+                power-domains = <&videocc MVSC_GDSC>,
+                                <&videocc MVS0_GDSC>,
+                                <&rpmhpd SC7280_CX>;
+                power-domain-names = "venus", "vcodec0", "cx";
+
+                interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>,
+                                <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
+                interconnect-names = "cpu-cfg", "video-mem";
+
+                iommus = <&apps_smmu 0x2180 0x20>,
+                         <&apps_smmu 0x2184 0x20>;
+
+                memory-region = <&video_mem>;
+
+                video-decoder {
+                        compatible = "venus-decoder";
+                };
+
+                video-encoder {
+                        compatible = "venus-encoder";
+                };
+
+                video-firmware {
+                        iommus = <&apps_smmu 0x21a2 0x0>;
+                };
+        };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
new file mode 100644
index 000000000000..b28c8e17f158
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
@@ -0,0 +1,385 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sdm660-camss
+
+  clocks:
+    minItems: 42
+    maxItems: 42
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: cphy_csid0
+      - const: cphy_csid1
+      - const: cphy_csid2
+      - const: cphy_csid3
+      - const: csi0_ahb
+      - const: csi0
+      - const: csi0_phy
+      - const: csi0_pix
+      - const: csi0_rdi
+      - const: csi1_ahb
+      - const: csi1
+      - const: csi1_phy
+      - const: csi1_pix
+      - const: csi1_rdi
+      - const: csi2_ahb
+      - const: csi2
+      - const: csi2_phy
+      - const: csi2_pix
+      - const: csi2_rdi
+      - const: csi3_ahb
+      - const: csi3
+      - const: csi3_phy
+      - const: csi3_pix
+      - const: csi3_rdi
+      - const: csiphy0_timer
+      - const: csiphy1_timer
+      - const: csiphy2_timer
+      - const: csiphy_ahb2crif
+      - const: csi_vfe0
+      - const: csi_vfe1
+      - const: ispif_ahb
+      - const: throttle_axi
+      - const: top_ahb
+      - const: vfe0_ahb
+      - const: vfe0
+      - const: vfe0_stream
+      - const: vfe1_ahb
+      - const: vfe1
+      - const: vfe1_stream
+      - const: vfe_ahb
+      - const: vfe_axi
+
+  interrupts:
+    minItems: 10
+    maxItems: 10
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: ispif
+      - const: vfe0
+      - const: vfe1
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    items:
+      - const: vfe-mem
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    items:
+      - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller.
+      - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+  reg:
+    minItems: 14
+    maxItems: 14
+
+  reg-names:
+    items:
+      - const: csi_clk_mux
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: csiphy0
+      - const: csiphy0_clk_mux
+      - const: csiphy1
+      - const: csiphy1_clk_mux
+      - const: csiphy2
+      - const: csiphy2_clk_mux
+      - const: ispif
+      - const: vfe0
+      - const: vfe1
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupt-names
+  - interrupts
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm660.h>
+    #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+
+    camss: camss@ca00000 {
+      compatible = "qcom,sdm660-camss";
+
+      clocks = <&mmcc CAMSS_AHB_CLK>,
+        <&mmcc CAMSS_CPHY_CSID0_CLK>,
+        <&mmcc CAMSS_CPHY_CSID1_CLK>,
+        <&mmcc CAMSS_CPHY_CSID2_CLK>,
+        <&mmcc CAMSS_CPHY_CSID3_CLK>,
+        <&mmcc CAMSS_CSI0_AHB_CLK>,
+        <&mmcc CAMSS_CSI0_CLK>,
+        <&mmcc CAMSS_CPHY_CSID0_CLK>,
+        <&mmcc CAMSS_CSI0PIX_CLK>,
+        <&mmcc CAMSS_CSI0RDI_CLK>,
+        <&mmcc CAMSS_CSI1_AHB_CLK>,
+        <&mmcc CAMSS_CSI1_CLK>,
+        <&mmcc CAMSS_CPHY_CSID1_CLK>,
+        <&mmcc CAMSS_CSI1PIX_CLK>,
+        <&mmcc CAMSS_CSI1RDI_CLK>,
+        <&mmcc CAMSS_CSI2_AHB_CLK>,
+        <&mmcc CAMSS_CSI2_CLK>,
+        <&mmcc CAMSS_CPHY_CSID2_CLK>,
+        <&mmcc CAMSS_CSI2PIX_CLK>,
+        <&mmcc CAMSS_CSI2RDI_CLK>,
+        <&mmcc CAMSS_CSI3_AHB_CLK>,
+        <&mmcc CAMSS_CSI3_CLK>,
+        <&mmcc CAMSS_CPHY_CSID3_CLK>,
+        <&mmcc CAMSS_CSI3PIX_CLK>,
+        <&mmcc CAMSS_CSI3RDI_CLK>,
+        <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+        <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+        <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+        <&mmcc CSIPHY_AHB2CRIF_CLK>,
+        <&mmcc CAMSS_CSI_VFE0_CLK>,
+        <&mmcc CAMSS_CSI_VFE1_CLK>,
+        <&mmcc CAMSS_ISPIF_AHB_CLK>,
+        <&mmcc THROTTLE_CAMSS_AXI_CLK>,
+        <&mmcc CAMSS_TOP_AHB_CLK>,
+        <&mmcc CAMSS_VFE0_AHB_CLK>,
+        <&mmcc CAMSS_VFE0_CLK>,
+        <&mmcc CAMSS_VFE0_STREAM_CLK>,
+        <&mmcc CAMSS_VFE1_AHB_CLK>,
+        <&mmcc CAMSS_VFE1_CLK>,
+        <&mmcc CAMSS_VFE1_STREAM_CLK>,
+        <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
+        <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
+
+      clock-names = "ahb",
+        "cphy_csid0",
+        "cphy_csid1",
+        "cphy_csid2",
+        "cphy_csid3",
+        "csi0_ahb",
+        "csi0",
+        "csi0_phy",
+        "csi0_pix",
+        "csi0_rdi",
+        "csi1_ahb",
+        "csi1",
+        "csi1_phy",
+        "csi1_pix",
+        "csi1_rdi",
+        "csi2_ahb",
+        "csi2",
+        "csi2_phy",
+        "csi2_pix",
+        "csi2_rdi",
+        "csi3_ahb",
+        "csi3",
+        "csi3_phy",
+        "csi3_pix",
+        "csi3_rdi",
+        "csiphy0_timer",
+        "csiphy1_timer",
+        "csiphy2_timer",
+        "csiphy_ahb2crif",
+        "csi_vfe0",
+        "csi_vfe1",
+        "ispif_ahb",
+        "throttle_axi",
+        "top_ahb",
+        "vfe0_ahb",
+        "vfe0",
+        "vfe0_stream",
+        "vfe1_ahb",
+        "vfe1",
+        "vfe1_stream",
+        "vfe_ahb",
+        "vfe_axi";
+
+      interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+
+      interrupt-names = "csid0",
+        "csid1",
+        "csid2",
+        "csid3",
+        "csiphy0",
+        "csiphy1",
+        "csiphy2",
+        "ispif",
+        "vfe0",
+        "vfe1";
+
+      iommus = <&mmss_smmu 0xc00>,
+        <&mmss_smmu 0xc01>,
+        <&mmss_smmu 0xc02>,
+        <&mmss_smmu 0xc03>;
+
+      power-domains = <&mmcc CAMSS_VFE0_GDSC>,
+        <&mmcc CAMSS_VFE1_GDSC>;
+
+      reg = <0x0ca00020 0x10>,
+        <0x0ca30000 0x100>,
+        <0x0ca30400 0x100>,
+        <0x0ca30800 0x100>,
+        <0x0ca30c00 0x100>,
+        <0x0c824000 0x1000>,
+        <0x0ca00120 0x4>,
+        <0x0c825000 0x1000>,
+        <0x0ca00124 0x4>,
+        <0x0c826000 0x1000>,
+        <0x0ca00128 0x4>,
+        <0x0ca31000 0x500>,
+        <0x0ca10000 0x1000>,
+        <0x0ca14000 0x1000>;
+
+      reg-names = "csi_clk_mux",
+        "csid0",
+        "csid1",
+        "csid2",
+        "csid3",
+        "csiphy0",
+        "csiphy0_clk_mux",
+        "csiphy1",
+        "csiphy1_clk_mux",
+        "csiphy2",
+        "csiphy2_clk_mux",
+        "ispif",
+        "vfe0",
+        "vfe1";
+
+      vdda-supply = <&reg_2v8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml
new file mode 100644
index 000000000000..45e3f58f52bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sdm660-venus.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sdm660-venus
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+      - const: bus_throttle
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: cpu-cfg
+      - const: video-mem
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 20
+
+  memory-region:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: vcodec0_core
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: vcodec0_core
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+  video-firmware:
+    type: object
+    additionalProperties: false
+
+    description: |
+      Firmware subnode is needed when the platform does not
+      have TrustZone.
+
+    properties:
+      iommus:
+        maxItems: 1
+
+    required:
+      - iommus
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - iommus
+  - memory-region
+  - power-domains
+  - video-decoder
+  - video-encoder
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        video-codec@cc00000 {
+                compatible = "qcom,sdm660-venus";
+                reg = <0x0cc00000 0xff000>;
+                clocks = <&mmcc VIDEO_CORE_CLK>,
+                         <&mmcc VIDEO_AHB_CLK>,
+                         <&mmcc VIDEO_AXI_CLK>,
+                         <&mmcc THROTTLE_VIDEO_AXI_CLK>;
+                clock-names = "core", "iface", "bus", "bus_throttle";
+                interconnects = <&gnoc 0 &mnoc 13>,
+                                <&mnoc 4 &bimc 5>;
+                interconnect-names = "cpu-cfg", "video-mem";
+                interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+                iommus = <&mmss_smmu 0x400>,
+                         <&mmss_smmu 0x401>,
+                         <&mmss_smmu 0x40a>,
+                         <&mmss_smmu 0x407>,
+                         <&mmss_smmu 0x40e>,
+                         <&mmss_smmu 0x40f>,
+                         <&mmss_smmu 0x408>,
+                         <&mmss_smmu 0x409>,
+                         <&mmss_smmu 0x40b>,
+                         <&mmss_smmu 0x40c>,
+                         <&mmss_smmu 0x40d>,
+                         <&mmss_smmu 0x410>,
+                         <&mmss_smmu 0x421>,
+                         <&mmss_smmu 0x428>,
+                         <&mmss_smmu 0x429>,
+                         <&mmss_smmu 0x42b>,
+                         <&mmss_smmu 0x42c>,
+                         <&mmss_smmu 0x42d>,
+                         <&mmss_smmu 0x411>,
+                         <&mmss_smmu 0x431>;
+                memory-region = <&venus_region>;
+                power-domains = <&mmcc VENUS_GDSC>;
+
+                video-decoder {
+                        compatible = "venus-decoder";
+                        clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+                        clock-names = "vcodec0_core";
+                        power-domains = <&mmcc VENUS_CORE0_GDSC>;
+                };
+
+                video-encoder {
+                        compatible = "venus-encoder";
+                        clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+                        clock-names = "vcodec0_core";
+                        power-domains = <&mmcc VENUS_CORE0_GDSC>;
+                };
+        };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
new file mode 100644
index 000000000000..f9a003882f84
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
@@ -0,0 +1,360 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sdm845-camss
+
+  clocks:
+    minItems: 36
+    maxItems: 36
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: cphy_rx_src
+      - const: csi0
+      - const: csi0_src
+      - const: csi1
+      - const: csi1_src
+      - const: csi2
+      - const: csi2_src
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy0_timer_src
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy1_timer_src
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy2_timer_src
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy3_timer_src
+      - const: gcc_camera_ahb
+      - const: gcc_camera_axi
+      - const: slow_ahb_src
+      - const: soc_ahb
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe0_src
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe1_src
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_src
+
+  interrupts:
+    minItems: 10
+    maxItems: 10
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupt-names
+  - interrupts
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      camss: camss@a00000 {
+        compatible = "qcom,sdm845-camss";
+
+        clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+          <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+          <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
+          <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY0_CLK>,
+          <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY1_CLK>,
+          <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY2_CLK>,
+          <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY3_CLK>,
+          <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
+          <&gcc GCC_CAMERA_AHB_CLK>,
+          <&gcc GCC_CAMERA_AXI_CLK>,
+          <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+          <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_LITE_CLK>,
+          <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+          <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
+
+        clock-names = "camnoc_axi",
+          "cpas_ahb",
+          "cphy_rx_src",
+          "csi0",
+          "csi0_src",
+          "csi1",
+          "csi1_src",
+          "csi2",
+          "csi2_src",
+          "csiphy0",
+          "csiphy0_timer",
+          "csiphy0_timer_src",
+          "csiphy1",
+          "csiphy1_timer",
+          "csiphy1_timer_src",
+          "csiphy2",
+          "csiphy2_timer",
+          "csiphy2_timer_src",
+          "csiphy3",
+          "csiphy3_timer",
+          "csiphy3_timer_src",
+          "gcc_camera_ahb",
+          "gcc_camera_axi",
+          "slow_ahb_src",
+          "soc_ahb",
+          "vfe0_axi",
+          "vfe0",
+          "vfe0_cphy_rx",
+          "vfe0_src",
+          "vfe1_axi",
+          "vfe1",
+          "vfe1_cphy_rx",
+          "vfe1_src",
+          "vfe_lite",
+          "vfe_lite_cphy_rx",
+          "vfe_lite_src";
+
+        interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+
+        interrupt-names = "csid0",
+          "csid1",
+          "csid2",
+          "csiphy0",
+          "csiphy1",
+          "csiphy2",
+          "csiphy3",
+          "vfe0",
+          "vfe1",
+          "vfe_lite";
+
+        iommus = <&apps_smmu 0x0808 0x0>,
+          <&apps_smmu 0x0810 0x8>,
+          <&apps_smmu 0x0c08 0x0>,
+          <&apps_smmu 0x0c10 0x8>;
+
+        power-domains = <&clock_camcc IFE_0_GDSC>,
+          <&clock_camcc IFE_1_GDSC>,
+          <&clock_camcc TITAN_TOP_GDSC>;
+
+        reg = <0 0xacb3000 0 0x1000>,
+          <0 0xacba000 0 0x1000>,
+          <0 0xacc8000 0 0x1000>,
+          <0 0xac65000 0 0x1000>,
+          <0 0xac66000 0 0x1000>,
+          <0 0xac67000 0 0x1000>,
+          <0 0xac68000 0 0x1000>,
+          <0 0xacaf000 0 0x4000>,
+          <0 0xacb6000 0 0x4000>,
+          <0 0xacc4000 0 0x4000>;
+
+        reg-names = "csid0",
+          "csid1",
+          "csid2",
+          "csiphy0",
+          "csiphy1",
+          "csiphy2",
+          "csiphy3",
+          "vfe0",
+          "vfe1",
+          "vfe_lite";
+
+        vdda-phy-supply = <&vreg_l1a_0p875>;
+        vdda-pll-supply = <&vreg_l26a_1p2>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
new file mode 100644
index 000000000000..8edc8a2f43a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus-v2.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sdm845-venus-v2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    minItems: 3
+    maxItems: 4
+
+  power-domain-names:
+    minItems: 3
+    items:
+      - const: venus
+      - const: vcodec0
+      - const: vcodec1
+      - const: cx
+
+  clocks:
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+      - const: vcodec0_core
+      - const: vcodec0_bus
+      - const: vcodec1_core
+      - const: vcodec1_bus
+
+  iommus:
+    maxItems: 2
+
+  memory-region:
+    maxItems: 1
+
+  video-core0:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-core1:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-firmware:
+    type: object
+    additionalProperties: false
+
+    description: |
+      Firmware subnode is needed when the platform does not
+      have TrustZone.
+
+    properties:
+      iommus:
+        maxItems: 1
+
+    required:
+      - iommus
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+  - iommus
+  - memory-region
+  - video-core0
+  - video-core1
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/clock/qcom,videocc-sdm845.h>
+
+        video-codec@aa00000 {
+                compatible = "qcom,sdm845-venus-v2";
+                reg = <0x0aa00000 0xff000>;
+                interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                         <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                         <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+                         <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+                         <&videocc VIDEO_CC_VCODEC0_AXI_CLK>,
+                         <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
+                         <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
+                clock-names = "core", "iface", "bus",
+                              "vcodec0_core", "vcodec0_bus",
+                              "vcodec1_core", "vcodec1_bus";
+                power-domains = <&videocc VENUS_GDSC>,
+                                <&videocc VCODEC0_GDSC>,
+                                <&videocc VCODEC1_GDSC>;
+                power-domain-names = "venus", "vcodec0", "vcodec1";
+                iommus = <&apps_smmu 0x10a0 0x8>,
+                         <&apps_smmu 0x10b0 0x0>;
+                memory-region = <&venus_mem>;
+
+                video-core0 {
+                        compatible = "venus-decoder";
+                };
+
+                video-core1 {
+                        compatible = "venus-encoder";
+                };
+        };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
new file mode 100644
index 000000000000..57d503373efe
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sdm845-venus
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+
+  iommus:
+    maxItems: 2
+
+  memory-region:
+    maxItems: 1
+
+  video-core0:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+      clocks:
+        maxItems: 2
+
+      clock-names:
+        items:
+          - const: core
+          - const: bus
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+  video-core1:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+      clocks:
+        maxItems: 2
+
+      clock-names:
+        items:
+          - const: core
+          - const: bus
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+  video-firmware:
+    type: object
+    additionalProperties: false
+
+    description: |
+      Firmware subnode is needed when the platform does not
+      have TrustZone.
+
+    properties:
+      iommus:
+        maxItems: 1
+
+    required:
+      - iommus
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - clock-names
+  - iommus
+  - memory-region
+  - video-core0
+  - video-core1
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/clock/qcom,videocc-sdm845.h>
+
+        video-codec@aa00000 {
+                compatible = "qcom,sdm845-venus";
+                reg = <0x0aa00000 0xff000>;
+                interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                         <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                         <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>;
+                clock-names = "core", "iface", "bus";
+                power-domains = <&videocc VENUS_GDSC>;
+                iommus = <&apps_smmu 0x10a0 0x8>,
+                         <&apps_smmu 0x10b0 0x0>;
+                memory-region = <&venus_mem>;
+
+                video-core0 {
+                        compatible = "venus-decoder";
+                        clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+                                 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+                        clock-names = "core", "bus";
+                        power-domains = <&videocc VCODEC0_GDSC>;
+                };
+
+                video-core1 {
+                        compatible = "venus-encoder";
+                        clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
+                                 <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
+                        clock-names = "core", "bus";
+                        power-domains = <&videocc VCODEC1_GDSC>;
+                };
+        };
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
new file mode 100644
index 000000000000..07a2af12f37d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
@@ -0,0 +1,463 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sm8250-camss
+
+  clocks:
+    minItems: 37
+    maxItems: 37
+
+  clock-names:
+    items:
+      - const: cam_ahb_clk
+      - const: cam_hf_axi
+      - const: cam_sf_axi
+      - const: camnoc_axi
+      - const: camnoc_axi_src
+      - const: core_ahb
+      - const: cpas_ahb
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: csiphy5
+      - const: csiphy5_timer
+      - const: slow_ahb_src
+      - const: vfe0_ahb
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe0_csid
+      - const: vfe0_areg
+      - const: vfe1_ahb
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe1_csid
+      - const: vfe1_areg
+      - const: vfe_lite_ahb
+      - const: vfe_lite_axi
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    minItems: 14
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  iommus:
+    minItems: 8
+    maxItems: 8
+
+  interconnects:
+    minItems: 4
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: cam_ahb
+      - const: cam_hf_0_mnoc
+      - const: cam_sf_0_mnoc
+      - const: cam_sf_icp_mnoc
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@5:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interconnects
+  - interconnect-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,camcc-sm8250.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss: camss@ac6a000 {
+            compatible = "qcom,sm8250-camss";
+
+            reg = <0 0xac6a000 0 0x2000>,
+                  <0 0xac6c000 0 0x2000>,
+                  <0 0xac6e000 0 0x1000>,
+                  <0 0xac70000 0 0x1000>,
+                  <0 0xac72000 0 0x1000>,
+                  <0 0xac74000 0 0x1000>,
+                  <0 0xacb4000 0 0xd000>,
+                  <0 0xacc3000 0 0xd000>,
+                  <0 0xacd9000 0 0x2200>,
+                  <0 0xacdb200 0 0x2200>;
+            reg-names = "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy3",
+                        "csiphy4",
+                        "csiphy5",
+                        "vfe0",
+                        "vfe1",
+                        "vfe_lite0",
+                        "vfe_lite1";
+
+            vdda-phy-supply = <&vreg_l5a_0p88>;
+            vdda-pll-supply = <&vreg_l9a_1p2>;
+
+            interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy3",
+                              "csiphy4",
+                              "csiphy5",
+                              "csid0",
+                              "csid1",
+                              "csid2",
+                              "csid3",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite0",
+                              "vfe_lite1";
+
+            power-domains = <&camcc IFE_0_GDSC>,
+                            <&camcc IFE_1_GDSC>,
+                            <&camcc TITAN_TOP_GDSC>;
+
+            clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&gcc GCC_CAMERA_SF_AXI_CLK>,
+                     <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
+                     <&camcc CAM_CC_CORE_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY3_CLK>,
+                     <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY4_CLK>,
+                     <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY5_CLK>,
+                     <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+                     <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                     <&camcc CAM_CC_IFE_0_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_0_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_0_AREG_CLK>,
+                     <&camcc CAM_CC_IFE_1_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_1_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_1_AREG_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+            clock-names = "cam_ahb_clk",
+                          "cam_hf_axi",
+                          "cam_sf_axi",
+                          "camnoc_axi",
+                          "camnoc_axi_src",
+                          "core_ahb",
+                          "cpas_ahb",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "csiphy4",
+                          "csiphy4_timer",
+                          "csiphy5",
+                          "csiphy5_timer",
+                          "slow_ahb_src",
+                          "vfe0_ahb",
+                          "vfe0_axi",
+                          "vfe0",
+                          "vfe0_cphy_rx",
+                          "vfe0_csid",
+                          "vfe0_areg",
+                          "vfe1_ahb",
+                          "vfe1_axi",
+                          "vfe1",
+                          "vfe1_cphy_rx",
+                          "vfe1_csid",
+                          "vfe1_areg",
+                          "vfe_lite_ahb",
+                          "vfe_lite_axi",
+                          "vfe_lite",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid";
+
+            iommus = <&apps_smmu 0x800 0x400>,
+                     <&apps_smmu 0x801 0x400>,
+                     <&apps_smmu 0x840 0x400>,
+                     <&apps_smmu 0x841 0x400>,
+                     <&apps_smmu 0xC00 0x400>,
+                     <&apps_smmu 0xC01 0x400>,
+                     <&apps_smmu 0xC40 0x400>,
+                     <&apps_smmu 0xC41 0x400>;
+
+            interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>,
+                            <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>,
+                            <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>,
+                            <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>;
+            interconnect-names = "cam_ahb",
+                                 "cam_hf_0_mnoc",
+                                 "cam_sf_0_mnoc",
+                                 "cam_sf_icp_mnoc";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
new file mode 100644
index 000000000000..4b7a12523dcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sm8250-venus.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sm8250-venus
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    minItems: 2
+    maxItems: 3
+
+  power-domain-names:
+    minItems: 2
+    items:
+      - const: venus
+      - const: vcodec0
+      - const: mx
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+      - const: vcodec0_core
+
+  iommus:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: cpu-cfg
+      - const: video-mem
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: bus
+      - const: core
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-firmware:
+    type: object
+    additionalProperties: false
+
+    description: |
+      Firmware subnode is needed when the platform does not
+      have TrustZone.
+
+    properties:
+      iommus:
+        maxItems: 1
+
+    required:
+      - iommus
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+  - interconnects
+  - interconnect-names
+  - iommus
+  - memory-region
+  - resets
+  - reset-names
+  - video-decoder
+  - video-encoder
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/clock/qcom,videocc-sm8250.h>
+        #include <dt-bindings/interconnect/qcom,sm8250.h>
+        #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+        #include <dt-bindings/power/qcom-rpmpd.h>
+
+        venus: video-codec@aa00000 {
+            compatible = "qcom,sm8250-venus";
+            reg = <0x0aa00000 0xff000>;
+            interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+            power-domains = <&videocc MVS0C_GDSC>,
+                            <&videocc MVS0_GDSC>,
+                            <&rpmhpd SM8250_MX>;
+            power-domain-names = "venus", "vcodec0", "mx";
+
+            clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+                     <&videocc VIDEO_CC_MVS0C_CLK>,
+                     <&videocc VIDEO_CC_MVS0_CLK>;
+            clock-names = "iface", "core", "vcodec0_core";
+
+            interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>,
+                            <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>;
+            interconnect-names = "cpu-cfg", "video-mem";
+
+            iommus = <&apps_smmu 0x2100 0x0400>;
+            memory-region = <&video_mem>;
+
+            resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
+                     <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
+            reset-names = "bus", "core";
+
+            video-decoder {
+                compatible = "venus-decoder";
+            };
+
+            video-encoder {
+                compatible = "venus-encoder";
+            };
+        };
diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt
deleted file mode 100644
index b602c4c025e7..000000000000
--- a/Documentation/devicetree/bindings/media/qcom,venus.txt
+++ /dev/null
@@ -1,120 +0,0 @@
-* Qualcomm Venus video encoder/decoder accelerators
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Value should contain one of:
-		- "qcom,msm8916-venus"
-		- "qcom,msm8996-venus"
-		- "qcom,sdm845-venus"
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Register base address and length of the register map.
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Should contain interrupt line number.
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: A List of phandle and clock specifier pairs as listed
-		    in clock-names property.
-- clock-names:
-	Usage: required for msm8916
-	Value type: <stringlist>
-	Definition: Should contain the following entries:
-		- "core"	Core video accelerator clock
-		- "iface"	Video accelerator AHB clock
-		- "bus"		Video accelerator AXI clock
-- clock-names:
-	Usage: required for msm8996
-	Value type: <stringlist>
-	Definition: Should contain the following entries:
-		- "core"	Core video accelerator clock
-		- "iface"	Video accelerator AHB clock
-		- "bus"		Video accelerator AXI clock
-		- "mbus"	Video MAXI clock
-- power-domains:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: A phandle and power domain specifier pairs to the
-		    power domain which is responsible for collapsing
-		    and restoring power to the peripheral.
-- iommus:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: A list of phandle and IOMMU specifier pairs.
-- memory-region:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the reserved-memory for the firmware
-		    memory region.
-
-* Subnodes
-The Venus video-codec node must contain two subnodes representing
-video-decoder and video-encoder, and one optional firmware subnode.
-Firmware subnode is needed when the platform does not have TrustZone.
-
-Every of video-encoder or video-decoder subnode should have:
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Value should contain "venus-decoder" or "venus-encoder"
-- clocks:
-	Usage: required for msm8996
-	Value type: <prop-encoded-array>
-	Definition: A List of phandle and clock specifier pairs as listed
-		    in clock-names property.
-- clock-names:
-	Usage: required for msm8996
-	Value type: <stringlist>
-	Definition: Should contain the following entries:
-		- "core"	Subcore video accelerator clock
-
-- power-domains:
-	Usage: required for msm8996
-	Value type: <prop-encoded-array>
-	Definition: A phandle and power domain specifier pairs to the
-		    power domain which is responsible for collapsing
-		    and restoring power to the subcore.
-
-The firmware subnode must have:
-
-- iommus:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: A list of phandle and IOMMU specifier pairs.
-
-* An Example
-	video-codec@1d00000 {
-		compatible = "qcom,msm8916-venus";
-		reg = <0x01d00000 0xff000>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
-			 <&gcc GCC_VENUS0_AHB_CLK>,
-			 <&gcc GCC_VENUS0_AXI_CLK>;
-		clock-names = "core", "iface", "bus";
-		power-domains = <&gcc VENUS_GDSC>;
-		iommus = <&apps_iommu 5>;
-		memory-region = <&venus_mem>;
-
-		video-decoder {
-			compatible = "venus-decoder";
-			clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
-			clock-names = "core";
-			power-domains = <&mmcc VENUS_CORE0_GDSC>;
-		};
-
-		video-encoder {
-			compatible = "venus-encoder";
-			clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
-			clock-names = "core";
-			power-domains = <&mmcc VENUS_CORE1_GDSC>;
-		};
-
-		video-firmware {
-			iommus = <&apps_iommu 0x10b2 0x0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml
index a64ee038d235..e732b7f3a635 100644
--- a/Documentation/devicetree/bindings/media/rc.yaml
+++ b/Documentation/devicetree/bindings/media/rc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/rc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic Infrared Remote Controller Device Tree Bindings
+title: Generic Infrared Remote Controller
 
 maintainers:
   - Mauro Carvalho Chehab <mchehab@kernel.org>
@@ -12,141 +12,150 @@ maintainers:
 
 properties:
   $nodename:
-    pattern: "^ir(@[a-f0-9]+)?$"
+    pattern: "^ir(-receiver)?(@[a-f0-9]+)?$"
 
   linux,rc-map-name:
     description:
       Specifies the scancode/key mapping table defined in-kernel for
       the remote controller.
-    allOf:
-      - $ref: '/schemas/types.yaml#/definitions/string'
-      - enum:
-          - rc-adstech-dvb-t-pci
-          - rc-alink-dtu-m
-          - rc-anysee
-          - rc-apac-viewcomp
-          - rc-astrometa-t2hybrid
-          - rc-asus-pc39
-          - rc-asus-ps3-100
-          - rc-ati-tv-wonder-hd-600
-          - rc-ati-x10
-          - rc-avermedia
-          - rc-avermedia-a16d
-          - rc-avermedia-cardbus
-          - rc-avermedia-dvbt
-          - rc-avermedia-m135a
-          - rc-avermedia-m733a-rm-k6
-          - rc-avermedia-rm-ks
-          - rc-avertv-303
-          - rc-azurewave-ad-tu700
-          - rc-beelink-gs1
-          - rc-behold
-          - rc-behold-columbus
-          - rc-budget-ci-old
-          - rc-cec
-          - rc-cinergy
-          - rc-cinergy-1400
-          - rc-d680-dmb
-          - rc-delock-61959
-          - rc-dib0700-nec
-          - rc-dib0700-rc5
-          - rc-digitalnow-tinytwin
-          - rc-digittrade
-          - rc-dm1105-nec
-          - rc-dntv-live-dvb-t
-          - rc-dntv-live-dvbt-pro
-          - rc-dtt200u
-          - rc-dvbsky
-          - rc-dvico-mce
-          - rc-dvico-portable
-          - rc-em-terratec
-          - rc-empty
-          - rc-encore-enltv
-          - rc-encore-enltv-fm53
-          - rc-encore-enltv2
-          - rc-evga-indtube
-          - rc-eztv
-          - rc-flydvb
-          - rc-flyvideo
-          - rc-fusionhdtv-mce
-          - rc-gadmei-rm008z
-          - rc-geekbox
-          - rc-genius-tvgo-a11mce
-          - rc-gotview7135
-          - rc-hauppauge
-          - rc-hisi-poplar
-          - rc-hisi-tv-demo
-          - rc-imon-mce
-          - rc-imon-pad
-          - rc-imon-rsc
-          - rc-iodata-bctv7e
-          - rc-it913x-v1
-          - rc-it913x-v2
-          - rc-kaiomy
-          - rc-khadas
-          - rc-kworld-315u
-          - rc-kworld-pc150u
-          - rc-kworld-plus-tv-analog
-          - rc-leadtek-y04g0051
-          - rc-lme2510
-          - rc-manli
-          - rc-medion-x10
-          - rc-medion-x10-digitainer
-          - rc-medion-x10-or2x
-          - rc-msi-digivox-ii
-          - rc-msi-digivox-iii
-          - rc-msi-tvanywhere
-          - rc-msi-tvanywhere-plus
-          - rc-nebula
-          - rc-nec-terratec-cinergy-xs
-          - rc-norwood
-          - rc-npgtech
-          - rc-odroid
-          - rc-pctv-sedna
-          - rc-pinnacle-color
-          - rc-pinnacle-grey
-          - rc-pinnacle-pctv-hd
-          - rc-pixelview
-          - rc-pixelview-002t
-          - rc-pixelview-mk12
-          - rc-pixelview-new
-          - rc-powercolor-real-angel
-          - rc-proteus-2309
-          - rc-purpletv
-          - rc-pv951
-          - rc-rc5-tv
-          - rc-rc6-mce
-          - rc-real-audio-220-32-keys
-          - rc-reddo
-          - rc-snapstream-firefly
-          - rc-streamzap
-          - rc-su3000
-          - rc-tango
-          - rc-tanix-tx3mini
-          - rc-tanix-tx5max
-          - rc-tbs-nec
-          - rc-technisat-ts35
-          - rc-technisat-usb2
-          - rc-terratec-cinergy-c-pci
-          - rc-terratec-cinergy-s2-hd
-          - rc-terratec-cinergy-xs
-          - rc-terratec-slim
-          - rc-terratec-slim-2
-          - rc-tevii-nec
-          - rc-tivo
-          - rc-total-media-in-hand
-          - rc-total-media-in-hand-02
-          - rc-trekstor
-          - rc-tt-1500
-          - rc-twinhan-dtv-cab-ci
-          - rc-twinhan1027
-          - rc-videomate-k100
-          - rc-videomate-s350
-          - rc-videomate-tv-pvr
-          - rc-wetek-hub
-          - rc-wetek-play2
-          - rc-winfast
-          - rc-winfast-usbii-deluxe
-          - rc-x96max
-          - rc-xbox-dvd
-          - rc-zx-irdec
+    $ref: '/schemas/types.yaml#/definitions/string'
+    enum:
+      - rc-adstech-dvb-t-pci
+      - rc-alink-dtu-m
+      - rc-anysee
+      - rc-apac-viewcomp
+      - rc-astrometa-t2hybrid
+      - rc-asus-pc39
+      - rc-asus-ps3-100
+      - rc-ati-tv-wonder-hd-600
+      - rc-ati-x10
+      - rc-avermedia
+      - rc-avermedia-a16d
+      - rc-avermedia-cardbus
+      - rc-avermedia-dvbt
+      - rc-avermedia-m135a
+      - rc-avermedia-m733a-rm-k6
+      - rc-avermedia-rm-ks
+      - rc-avertv-303
+      - rc-azurewave-ad-tu700
+      - rc-beelink-gs1
+      - rc-behold
+      - rc-behold-columbus
+      - rc-budget-ci-old
+      - rc-cec
+      - rc-cinergy
+      - rc-cinergy-1400
+      - rc-ct-90405
+      - rc-d680-dmb
+      - rc-delock-61959
+      - rc-dib0700-nec
+      - rc-dib0700-rc5
+      - rc-digitalnow-tinytwin
+      - rc-digittrade
+      - rc-dm1105-nec
+      - rc-dntv-live-dvb-t
+      - rc-dntv-live-dvbt-pro
+      - rc-dtt200u
+      - rc-dvbsky
+      - rc-dvico-mce
+      - rc-dvico-portable
+      - rc-em-terratec
+      - rc-empty
+      - rc-encore-enltv
+      - rc-encore-enltv-fm53
+      - rc-encore-enltv2
+      - rc-evga-indtube
+      - rc-eztv
+      - rc-flydvb
+      - rc-flyvideo
+      - rc-fusionhdtv-mce
+      - rc-gadmei-rm008z
+      - rc-geekbox
+      - rc-genius-tvgo-a11mce
+      - rc-gotview7135
+      - rc-hauppauge
+      - rc-hisi-poplar
+      - rc-hisi-tv-demo
+      - rc-imon-mce
+      - rc-imon-pad
+      - rc-imon-rsc
+      - rc-iodata-bctv7e
+      - rc-it913x-v1
+      - rc-it913x-v2
+      - rc-kaiomy
+      - rc-khadas
+      - rc-khamsin
+      - rc-kworld-315u
+      - rc-kworld-pc150u
+      - rc-kworld-plus-tv-analog
+      - rc-leadtek-y04g0051
+      - rc-lme2510
+      - rc-manli
+      - rc-mecool-kii-pro
+      - rc-mecool-kiii-pro
+      - rc-medion-x10
+      - rc-medion-x10-digitainer
+      - rc-medion-x10-or2x
+      - rc-minix-neo
+      - rc-msi-digivox-ii
+      - rc-msi-digivox-iii
+      - rc-msi-tvanywhere
+      - rc-msi-tvanywhere-plus
+      - rc-nebula
+      - rc-nec-terratec-cinergy-xs
+      - rc-norwood
+      - rc-npgtech
+      - rc-odroid
+      - rc-pctv-sedna
+      - rc-pine64
+      - rc-pinnacle-color
+      - rc-pinnacle-grey
+      - rc-pinnacle-pctv-hd
+      - rc-pixelview
+      - rc-pixelview-002t
+      - rc-pixelview-mk12
+      - rc-pixelview-new
+      - rc-powercolor-real-angel
+      - rc-proteus-2309
+      - rc-purpletv
+      - rc-pv951
+      - rc-rc5-tv
+      - rc-rc6-mce
+      - rc-real-audio-220-32-keys
+      - rc-reddo
+      - rc-snapstream-firefly
+      - rc-streamzap
+      - rc-su3000
+      - rc-tanix-tx3mini
+      - rc-tanix-tx5max
+      - rc-tbs-nec
+      - rc-technisat-ts35
+      - rc-technisat-usb2
+      - rc-terratec-cinergy-c-pci
+      - rc-terratec-cinergy-s2-hd
+      - rc-terratec-cinergy-xs
+      - rc-terratec-slim
+      - rc-terratec-slim-2
+      - rc-tevii-nec
+      - rc-tivo
+      - rc-total-media-in-hand
+      - rc-total-media-in-hand-02
+      - rc-trekstor
+      - rc-tt-1500
+      - rc-twinhan-dtv-cab-ci
+      - rc-twinhan1027
+      - rc-videomate-k100
+      - rc-videomate-s350
+      - rc-videomate-tv-pvr
+      - rc-videostrong-kii-pro
+      - rc-vega-s9x
+      - rc-wetek-hub
+      - rc-wetek-play2
+      - rc-winfast
+      - rc-winfast-usbii-deluxe
+      - rc-x96max
+      - rc-xbox-360
+      - rc-xbox-dvd
+      - rc-zx-irdec
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
index 8e9251a0f9ef..50e0740af15a 100644
--- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
@@ -27,46 +27,50 @@ properties:
   interrupts:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
   port:
-    type: object
-    additionalProperties: false
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
 
     properties:
-       endpoint:
-         type: object
-         additionalProperties: false
-
-         # Properties described in
-         # Documentation/devicetree/bindings/media/video-interfaces.txt
-         properties:
-           remote-endpoint: true
-           hsync-active: true
-           vsync-active: true
-           field-even-active: false
-           bus-width:
-             enum: [8, 16]
-             default: 8
-
-         required:
-           - remote-endpoint
-
-    required:
-      - endpoint
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          hsync-active: true
+          vsync-active: true
+          field-even-active: false
+          bus-width:
+            enum: [8, 16]
+            default: 8
 
 required:
   - compatible
   - reg
   - interrupts
+  - clocks
+  - power-domains
   - port
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r7s72100-clock.h>
 
     ceu: ceu@e8210000 {
         reg = <0xe8210000 0x209c>;
         compatible = "renesas,r7s72100-ceu";
         interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp6_clks R7S72100_CLK_CEU>;
+        power-domains = <&cpg_clocks>;
 
         port {
             ceu_in: endpoint {
diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
index 408442a0c389..b520d6c5c102 100644
--- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
@@ -19,15 +19,18 @@ properties:
   compatible:
     items:
       - enum:
-        - renesas,r8a774a1-csi2 # RZ/G2M
-        - renesas,r8a774b1-csi2 # RZ/G2N
-        - renesas,r8a774c0-csi2 # RZ/G2E
-        - renesas,r8a7795-csi2  # R-Car H3
-        - renesas,r8a7796-csi2  # R-Car M3-W
-        - renesas,r8a77965-csi2 # R-Car M3-N
-        - renesas,r8a77970-csi2 # R-Car V3M
-        - renesas,r8a77980-csi2 # R-Car V3H
-        - renesas,r8a77990-csi2 # R-Car E3
+          - renesas,r8a774a1-csi2 # RZ/G2M
+          - renesas,r8a774b1-csi2 # RZ/G2N
+          - renesas,r8a774c0-csi2 # RZ/G2E
+          - renesas,r8a774e1-csi2 # RZ/G2H
+          - renesas,r8a7795-csi2  # R-Car H3
+          - renesas,r8a7796-csi2  # R-Car M3-W
+          - renesas,r8a77961-csi2 # R-Car M3-W+
+          - renesas,r8a77965-csi2 # R-Car M3-N
+          - renesas,r8a77970-csi2 # R-Car V3M
+          - renesas,r8a77980-csi2 # R-Car V3H
+          - renesas,r8a77990-csi2 # R-Car E3
+          - renesas,r8a779a0-csi2 # R-Car V3U
 
   reg:
     maxItems: 1
@@ -45,76 +48,43 @@ properties:
     maxItems: 1
 
   ports:
-    type: object
-    description:
-      A node containing input and output port nodes with endpoint definitions
-      as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description:
           Input port node, single endpoint describing the CSI-2 transmitter.
 
         properties:
-          reg:
-            const: 0
-
           endpoint:
-            type: object
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
 
             properties:
               clock-lanes:
                 maxItems: 1
 
               data-lanes:
-                maxItems: 1
-
-              remote-endpoint: true
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
 
             required:
               - clock-lanes
               - data-lanes
-              - remote-endpoint
-
-            additionalProperties: false
-
-        additionalProperties: false
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description:
           Output port node, multiple endpoints describing all the R-Car VIN
           modules connected the CSI-2 receiver.
 
-        properties:
-          '#address-cells':
-            const: 1
-
-          '#size-cells':
-            const: 0
-
-          reg:
-            const: 1
-
-        patternProperties:
-          "^endpoint@[0-9a-f]$":
-            type: object
-
-            properties:
-              reg:
-                maxItems: 1
-
-              remote-endpoint: true
-
-            required:
-              - reg
-              - remote-endpoint
-
-            additionalProperties: false
-
-        additionalProperties: false
+    required:
+      - port@0
+      - port@1
 
 required:
   - compatible
@@ -135,7 +105,7 @@ examples:
 
     csi20: csi2@fea80000 {
             compatible = "renesas,r8a7796-csi2";
-            reg = <0 0xfea80000 0 0x10000>;
+            reg = <0xfea80000 0x10000>;
             interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
             clocks = <&cpg CPG_MOD 714>;
             power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt
deleted file mode 100644
index 0d8974aa8b38..000000000000
--- a/Documentation/devicetree/bindings/media/renesas,drif.txt
+++ /dev/null
@@ -1,177 +0,0 @@
-Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
-------------------------------------------------------------
-
-R-Car Gen3 DRIF is a SPI like receive only slave device. A general
-representation of DRIF interfacing with a master device is shown below.
-
-+---------------------+                +---------------------+
-|                     |-----SCK------->|CLK                  |
-|       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
-|                     |-----SD0------->|D0                   |
-|                     |-----SD1------->|D1                   |
-+---------------------+                +---------------------+
-
-As per datasheet, each DRIF channel (drifn) is made up of two internal
-channels (drifn0 & drifn1). These two internal channels share the common
-CLK & SYNC. Each internal channel has its own dedicated resources like
-irq, dma channels, address space & clock. This internal split is not
-visible to the external master device.
-
-The device tree model represents each internal channel as a separate node.
-The internal channels sharing the CLK & SYNC are tied together by their
-phandles using a property called "renesas,bonding". For the rest of
-the documentation, unless explicitly stated, the word channel implies an
-internal channel.
-
-When both internal channels are enabled they need to be managed together
-as one (i.e.) they cannot operate alone as independent devices. Out of the
-two, one of them needs to act as a primary device that accepts common
-properties of both the internal channels. This channel is identified by a
-property called "renesas,primary-bond".
-
-To summarize,
-   - When both the internal channels that are bonded together are enabled,
-     the zeroth channel is selected as primary-bond. This channels accepts
-     properties common to all the members of the bond.
-   - When only one of the bonded channels need to be enabled, the property
-     "renesas,bonding" or "renesas,primary-bond" will have no effect. That
-     enabled channel can act alone as any other independent device.
-
-Required properties of an internal channel:
--------------------------------------------
-- compatible:	"renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC.
-		"renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC.
-		"renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device.
-
-		When compatible with the generic version, nodes must list the
-		SoC-specific version corresponding to the platform first
-		followed by the generic version.
-
-- reg: offset and length of that channel.
-- interrupts: associated with that channel.
-- clocks: phandle and clock specifier of that channel.
-- clock-names: clock input name string: "fck".
-- dmas: phandles to the DMA channels.
-- dma-names: names of the DMA channel: "rx".
-- renesas,bonding: phandle to the other channel.
-
-Optional properties of an internal channel:
--------------------------------------------
-- power-domains: phandle to the respective power domain.
-
-Required properties of an internal channel when:
-	- It is the only enabled channel of the bond (or)
-	- If it acts as primary among enabled bonds
---------------------------------------------------------
-- pinctrl-0: pin control group to be used for this channel.
-- pinctrl-names: must be "default".
-- renesas,primary-bond: empty property indicating the channel acts as primary
-			among the bonded channels.
-- port: child port node corresponding to the data input, in accordance with
-	the video interface bindings defined in
-	Documentation/devicetree/bindings/media/video-interfaces.txt. The port
-	node must contain at least one endpoint.
-
-Optional endpoint property:
----------------------------
-- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively.
-	       This property maps to SYNCAC bit in the hardware manual. The
-	       default is 1 (active high).
-
-Example:
---------
-
-(1) Both internal channels enabled:
------------------------------------
-
-When interfacing with a third party tuner device with two data pins as shown
-below.
-
-+---------------------+                +---------------------+
-|                     |-----SCK------->|CLK                  |
-|       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
-|                     |-----SD0------->|D0                   |
-|                     |-----SD1------->|D1                   |
-+---------------------+                +---------------------+
-
-	drif00: rif@e6f40000 {
-		compatible = "renesas,r8a7795-drif",
-			     "renesas,rcar-gen3-drif";
-		reg = <0 0xe6f40000 0 0x64>;
-		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 515>;
-		clock-names = "fck";
-		dmas = <&dmac1 0x20>, <&dmac2 0x20>;
-		dma-names = "rx", "rx";
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		renesas,bonding = <&drif01>;
-		renesas,primary-bond;
-		pinctrl-0 = <&drif0_pins>;
-		pinctrl-names = "default";
-		port {
-			drif0_ep: endpoint {
-			     remote-endpoint = <&tuner_ep>;
-			};
-		};
-	};
-
-	drif01: rif@e6f50000 {
-		compatible = "renesas,r8a7795-drif",
-			     "renesas,rcar-gen3-drif";
-		reg = <0 0xe6f50000 0 0x64>;
-		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 514>;
-		clock-names = "fck";
-		dmas = <&dmac1 0x22>, <&dmac2 0x22>;
-		dma-names = "rx", "rx";
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		renesas,bonding = <&drif00>;
-	};
-
-
-(2) Internal channel 1 alone is enabled:
-----------------------------------------
-
-When interfacing with a third party tuner device with one data pin as shown
-below.
-
-+---------------------+                +---------------------+
-|                     |-----SCK------->|CLK                  |
-|       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
-|                     |                |D0 (unused)          |
-|                     |-----SD-------->|D1                   |
-+---------------------+                +---------------------+
-
-	drif00: rif@e6f40000 {
-		compatible = "renesas,r8a7795-drif",
-			     "renesas,rcar-gen3-drif";
-		reg = <0 0xe6f40000 0 0x64>;
-		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 515>;
-		clock-names = "fck";
-		dmas = <&dmac1 0x20>, <&dmac2 0x20>;
-		dma-names = "rx", "rx";
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		renesas,bonding = <&drif01>;
-	};
-
-	drif01: rif@e6f50000 {
-		compatible = "renesas,r8a7795-drif",
-			     "renesas,rcar-gen3-drif";
-		reg = <0 0xe6f50000 0 0x64>;
-		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 514>;
-		clock-names = "fck";
-		dmas = <&dmac1 0x22>, <&dmac2 0x22>;
-		dma-names = "rx", "rx";
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		renesas,bonding = <&drif00>;
-		pinctrl-0 = <&drif0_pins>;
-		pinctrl-names = "default";
-		port {
-			drif0_ep: endpoint {
-			     remote-endpoint = <&tuner_ep>;
-			     sync-active = <0>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
new file mode 100644
index 000000000000..9403b235e976
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF)
+
+maintainers:
+  - Ramesh Shanmugasundaram <rashanmu@gmail.com>
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+description: |
+  R-Car Gen3 DRIF is a SPI like receive only slave device. A general
+  representation of DRIF interfacing with a master device is shown below.
+
+  +---------------------+                +---------------------+
+  |                     |-----SCK------->|CLK                  |
+  |       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
+  |                     |-----SD0------->|D0                   |
+  |                     |-----SD1------->|D1                   |
+  +---------------------+                +---------------------+
+
+  As per datasheet, each DRIF channel (drifn) is made up of two internal
+  channels (drifn0 & drifn1). These two internal channels share the common
+  CLK & SYNC. Each internal channel has its own dedicated resources like
+  irq, dma channels, address space & clock. This internal split is not
+  visible to the external master device.
+
+  The device tree model represents each internal channel as a separate node.
+  The internal channels sharing the CLK & SYNC are tied together by their
+  phandles using a property called "renesas,bonding". For the rest of
+  the documentation, unless explicitly stated, the word channel implies an
+  internal channel.
+
+  When both internal channels are enabled they need to be managed together
+  as one (i.e.) they cannot operate alone as independent devices. Out of the
+  two, one of them needs to act as a primary device that accepts common
+  properties of both the internal channels. This channel is identified by a
+  property called "renesas,primary-bond".
+
+  To summarize,
+     * When both the internal channels that are bonded together are enabled,
+       the zeroth channel is selected as primary-bond. This channels accepts
+       properties common to all the members of the bond.
+     * When only one of the bonded channels need to be enabled, the property
+       "renesas,bonding" or "renesas,primary-bond" will have no effect. That
+       enabled channel can act alone as any other independent device.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7795-drif        # R-Car H3
+          - renesas,r8a7796-drif        # R-Car M3-W
+          - renesas,r8a77965-drif       # R-Car M3-N
+          - renesas,r8a77990-drif       # R-Car E3
+      - const: renesas,rcar-gen3-drif   # Generic R-Car Gen3 compatible device
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    minItems: 1
+    items:
+      - const: rx
+      - const: rx
+
+  renesas,bonding:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle to the other internal channel of DRIF
+
+  power-domains:
+    maxItems: 1
+
+  renesas,primary-bond:
+    type: boolean
+    description:
+      Indicates that the channel acts as primary among the bonded channels.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Child port node corresponding to the data input. The port node must
+      contain at least one endpoint.
+
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
+
+        properties:
+          sync-active:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1]
+            description:
+              Indicates sync signal polarity, 0/1 for low/high respectively.
+              This property maps to SYNCAC bit in the hardware manual. The
+              default is 1 (active high).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - dmas
+  - dma-names
+  - renesas,bonding
+  - power-domains
+
+allOf:
+  - if:
+      required:
+        - renesas,primary-bond
+    then:
+      required:
+        - pinctrl-0
+        - pinctrl-names
+        - port
+
+  - if:
+      required:
+        - port
+    then:
+      required:
+        - pinctrl-0
+        - pinctrl-names
+    else:
+      properties:
+        pinctrl-0: false
+        pinctrl-names: false
+
+additionalProperties: false
+
+examples:
+  # Example with both internal channels enabled.
+  #
+  # When interfacing with a third party tuner device with two data pins as shown
+  # below.
+  #
+  # +---------------------+                +---------------------+
+  # |                     |-----SCK------->|CLK                  |
+  # |       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
+  # |                     |-----SD0------->|D0                   |
+  # |                     |-----SD1------->|D1                   |
+  # +---------------------+                +---------------------+
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            drif00: rif@e6f40000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f40000 0 0x64>;
+                    interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 515>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    renesas,bonding = <&drif01>;
+                    resets = <&cpg 515>;
+                    renesas,primary-bond;
+                    pinctrl-0 = <&drif0_pins>;
+                    pinctrl-names = "default";
+                    port {
+                            drif0_ep: endpoint {
+                                 remote-endpoint = <&tuner_ep>;
+                            };
+                    };
+            };
+
+            drif01: rif@e6f50000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f50000 0 0x64>;
+                    interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 514>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    renesas,bonding = <&drif00>;
+                    resets = <&cpg 514>;
+            };
+    };
+
+  # Example with internal channel 1 alone enabled.
+  #
+  # When interfacing with a third party tuner device with one data pin as shown
+  # below.
+  #
+  # +---------------------+                +---------------------+
+  # |                     |-----SCK------->|CLK                  |
+  # |       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
+  # |                     |                |D0 (unused)          |
+  # |                     |-----SD-------->|D1                   |
+  # +---------------------+                +---------------------+
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            drif10: rif@e6f60000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f60000 0 0x64>;
+                    interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 513>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    resets = <&cpg 513>;
+                    renesas,bonding = <&drif11>;
+            };
+
+            drif11: rif@e6f70000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f70000 0 0x64>;
+                    interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 512>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    resets = <&cpg 512>;
+                    renesas,bonding = <&drif10>;
+                    pinctrl-0 = <&drif1_pins>;
+                    pinctrl-names = "default";
+                    port {
+                            drif1_ep: endpoint {
+                                 remote-endpoint = <&tuner_ep1>;
+                                 sync-active = <0>;
+                            };
+                    };
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.txt b/Documentation/devicetree/bindings/media/renesas,fcp.txt
deleted file mode 100644
index 79c37395b396..000000000000
--- a/Documentation/devicetree/bindings/media/renesas,fcp.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Renesas R-Car Frame Compression Processor (FCP)
------------------------------------------------
-
-The FCP is a companion module of video processing modules in the Renesas R-Car
-Gen3 and RZ/G2 SoCs. It provides data compression and decompression, data
-caching, and conversion of AXI transactions in order to reduce the memory
-bandwidth.
-
-There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and FCP
-for FDP (FCPF). Their configuration and behaviour depend on the module they
-are paired with. These DT bindings currently support the FCPV and FCPF.
-
- - compatible: Must be one or more of the following
-
-   - "renesas,fcpv" for generic compatible 'FCP for VSP'
-   - "renesas,fcpf" for generic compatible 'FCP for FDP'
-
- - reg: the register base and size for the device registers
- - clocks: Reference to the functional clock
-
-Optional properties:
- - power-domains : power-domain property defined with a power domain specifier
-		   to respective power domain.
-
-
-Device node example
--------------------
-
-	fcpvd1: fcp@fea2f000 {
-		compatible = "renesas,fcpv";
-		reg = <0 0xfea2f000 0 0x200>;
-		clocks = <&cpg CPG_MOD 602>;
-		power-domains = <&sysc R8A7795_PD_A3VP>;
-	};
diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.yaml b/Documentation/devicetree/bindings/media/renesas,fcp.yaml
new file mode 100644
index 000000000000..43f2fed8cd33
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,fcp.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,fcp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Frame Compression Processor (FCP)
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The FCP is a companion module of video processing modules in the Renesas
+  R-Car Gen3 and RZ/G2 SoCs. It provides data compression and decompression,
+  data caching, and conversion of AXI transactions in order to reduce the
+  memory bandwidth.
+
+  There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and
+  FCP for FDP (FCPF). Their configuration and behaviour depend on the module
+  they are paired with. These DT bindings currently support the FCPV and FCPF.
+
+properties:
+  compatible:
+    enum:
+      - renesas,fcpv # FCP for VSP
+      - renesas,fcpf # FCP for FDP
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  # R8A7795 (R-Car H3) FCP for VSP-D1
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    fcp@fea2f000 {
+        compatible = "renesas,fcpv";
+        reg = <0xfea2f000 0x200>;
+        clocks = <&cpg CPG_MOD 602>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 602>;
+        iommus = <&ipmmu_vi0 9>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/renesas,fdp1.txt b/Documentation/devicetree/bindings/media/renesas,fdp1.txt
deleted file mode 100644
index 8dd1007bb573..000000000000
--- a/Documentation/devicetree/bindings/media/renesas,fdp1.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Renesas R-Car Fine Display Processor (FDP1)
--------------------------------------------
-
-The FDP1 is a de-interlacing module which converts interlaced video to
-progressive video. It is capable of performing pixel format conversion between
-YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are supported as
-an input to the module.
-
-Required properties:
-
- - compatible: must be "renesas,fdp1"
- - reg: the register base and size for the device registers
- - interrupts : interrupt specifier for the FDP1 instance
- - clocks: reference to the functional clock
-
-Optional properties:
-
- - power-domains: reference to the power domain that the FDP1 belongs to, if
-                  any.
- - renesas,fcp: a phandle referencing the FCP that handles memory accesses
-                for the FDP1. Not needed on Gen2, mandatory on Gen3.
-
-Please refer to the binding documentation for the clock and/or power domain
-providers for more details.
-
-
-Device node example
--------------------
-
-	fdp1@fe940000 {
-		compatible = "renesas,fdp1";
-		reg = <0 0xfe940000 0 0x2400>;
-		interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 119>;
-		power-domains = <&sysc R8A7795_PD_A3VP>;
-		renesas,fcp = <&fcpf0>;
-	};
diff --git a/Documentation/devicetree/bindings/media/renesas,fdp1.yaml b/Documentation/devicetree/bindings/media/renesas,fdp1.yaml
new file mode 100644
index 000000000000..2a27a7296fea
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,fdp1.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,fdp1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Fine Display Processor (FDP1)
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description:
+  The FDP1 is a de-interlacing module which converts interlaced video to
+  progressive video. It is capable of performing pixel format conversion
+  between YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are
+  supported as an input to the module.
+
+properties:
+  compatible:
+    enum:
+      - renesas,fdp1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,fcp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle referencing the FCP that handles memory accesses for the FDP1.
+      Not allowed on R-Car Gen2, mandatory on R-Car Gen3.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    fdp1@fe940000 {
+        compatible = "renesas,fdp1";
+        reg = <0xfe940000 0x2400>;
+        interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 119>;
+        power-domains = <&sysc R8A7795_PD_A3VP>;
+        resets = <&cpg 119>;
+        renesas,fcp = <&fcpf0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/renesas,imr.txt b/Documentation/devicetree/bindings/media/renesas,imr.txt
deleted file mode 100644
index b0614153ed36..000000000000
--- a/Documentation/devicetree/bindings/media/renesas,imr.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Renesas R-Car Image Renderer (Distortion Correction Engine)
------------------------------------------------------------
-
-The image renderer, or the distortion correction engine, is a drawing processor
-with a simple instruction system capable of referencing video capture data or
-data in an external memory as 2D texture data and performing texture mapping
-and drawing with respect to any shape that is split into triangular objects.
-
-Required properties:
-
-- compatible: "renesas,<soctype>-imr-lx4", "renesas,imr-lx4" as a fallback for
-  the image renderer light extended 4 (IMR-LX4) found in the R-Car gen3 SoCs,
-  where the examples with <soctype> are:
-  - "renesas,r8a7795-imr-lx4" for R-Car H3,
-  - "renesas,r8a7796-imr-lx4" for R-Car M3-W.
-- reg: offset and length of the register block;
-- interrupts: single interrupt specifier;
-- clocks: single clock phandle/specifier pair;
-- power-domains: power domain phandle/specifier pair;
-- resets: reset phandle/specifier pair.
-
-Example:
-
-	imr-lx4@fe860000 {
-		compatible = "renesas,r8a7795-imr-lx4", "renesas,imr-lx4";
-		reg = <0 0xfe860000 0 0x2000>;
-		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 823>;
-		power-domains = <&sysc R8A7795_PD_A3VC>;
-		resets = <&cpg 823>;
-	};
diff --git a/Documentation/devicetree/bindings/media/renesas,imr.yaml b/Documentation/devicetree/bindings/media/renesas,imr.yaml
new file mode 100644
index 000000000000..512f57417fd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,imr.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,imr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Image Renderer (Distortion Correction Engine)
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+description: |
+  The image renderer, or the distortion correction engine, is a drawing
+  processor with a simple instruction system capable of referencing video
+  capture data or data in an external memory as 2D texture data and performing
+  texture mapping and drawing with respect to any shape that is split into
+  triangular objects.
+
+  The image renderer light extended 4 (IMR-LX4) is found in R-Car Gen3 SoCs.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7795-imr-lx4 # R-Car H3
+          - renesas,r8a7796-imr-lx4 # R-Car M3-W
+      - const: renesas,imr-lx4      # R-Car Gen3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    imr-lx4@fe860000 {
+            compatible = "renesas,r8a7795-imr-lx4", "renesas,imr-lx4";
+            reg = <0xfe860000 0x2000>;
+            interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 823>;
+            power-domains = <&sysc R8A7795_PD_A3VC>;
+            resets = <&cpg 823>;
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,isp.yaml b/Documentation/devicetree/bindings/media/renesas,isp.yaml
new file mode 100644
index 000000000000..514857d36f6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,isp.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2021 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car ISP Channel Selector
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The R-Car ISP Channel Selector provides MIPI CSI-2 VC and DT filtering
+  capabilities for the Renesas R-Car family of devices. It is used in
+  conjunction with the R-Car VIN and CSI-2 modules, which provides the video
+  capture capabilities.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a779a0-isp # V3U
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node, multiple endpoints describing the connected R-Car
+          CSI-2 receivers.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 0.
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 1.
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 2.
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 3.
+
+      port@5:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 4.
+
+      port@6:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 5.
+
+      port@7:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 6.
+
+      port@8:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 7.
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+      - port@5
+      - port@6
+      - port@7
+      - port@8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    isp1: isp@fed20000 {
+            compatible = "renesas,r8a779a0-isp";
+            reg = <0xfed20000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 613>;
+            power-domains = <&sysc R8A779A0_PD_A3ISP01>;
+            resets = <&cpg 613>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <0>;
+                            isp1csi41: endpoint@1 {
+                                    reg = <1>;
+                                    remote-endpoint = <&csi41isp1>;
+                            };
+                    };
+
+                    port@1 {
+                            reg = <1>;
+                            isp1vin08: endpoint {
+                                    remote-endpoint = <&vin08isp1>;
+                            };
+                    };
+
+                    port@2 {
+                            reg = <2>;
+                            isp1vin09: endpoint {
+                                    remote-endpoint = <&vin09isp1>;
+                            };
+                    };
+
+                    port@3 {
+                            reg = <3>;
+                            isp1vin10: endpoint {
+                                    remote-endpoint = <&vin10isp1>;
+                            };
+                    };
+
+                    port@4 {
+                            reg = <4>;
+                            isp1vin11: endpoint {
+                                    remote-endpoint = <&vin11isp1>;
+                            };
+                    };
+
+                    port@5 {
+                            reg = <5>;
+                            isp1vin12: endpoint {
+                                    remote-endpoint = <&vin12isp1>;
+                            };
+                    };
+
+                    port@6 {
+                            reg = <6>;
+                            isp1vin13: endpoint {
+                                    remote-endpoint = <&vin13isp1>;
+                            };
+                    };
+
+                    port@7 {
+                            reg = <7>;
+                            isp1vin14: endpoint {
+                                    remote-endpoint = <&vin14isp1>;
+                            };
+                    };
+
+                    port@8 {
+                            reg = <8>;
+                            isp1vin15: endpoint {
+                                    remote-endpoint = <&vin15isp1>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,jpu.txt b/Documentation/devicetree/bindings/media/renesas,jpu.txt
deleted file mode 100644
index d3436e5190f9..000000000000
--- a/Documentation/devicetree/bindings/media/renesas,jpu.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Renesas JPEG Processing Unit
-
-The JPEG processing unit (JPU) incorporates the JPEG codec with an encoding
-and decoding function conforming to the JPEG baseline process, so that the JPU
-can encode image data and decode JPEG data quickly.
-
-Required properties:
-- compatible: "renesas,jpu-<soctype>", "renesas,rcar-gen2-jpu" as fallback.
-	Examples with soctypes are:
-	  - "renesas,jpu-r8a7790" for R-Car H2
-	  - "renesas,jpu-r8a7791" for R-Car M2-W
-	  - "renesas,jpu-r8a7792" for R-Car V2H
-	  - "renesas,jpu-r8a7793" for R-Car M2-N
-
-  - reg: Base address and length of the registers block for the JPU.
-  - interrupts: JPU interrupt specifier.
-  - clocks: A phandle + clock-specifier pair for the JPU functional clock.
-
-Example: R8A7790 (R-Car H2) JPU node
-	jpeg-codec@fe980000 {
-		compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
-		reg = <0 0xfe980000 0 0x10300>;
-		interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7790_CLK_JPU>;
-	};
diff --git a/Documentation/devicetree/bindings/media/renesas,jpu.yaml b/Documentation/devicetree/bindings/media/renesas,jpu.yaml
new file mode 100644
index 000000000000..2f55968e864f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,jpu.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,jpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas JPEG Processing Unit
+
+maintainers:
+  - Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
+
+description:
+  The JPEG processing unit (JPU) incorporates the JPEG codec with an encoding
+  and decoding function conforming to the JPEG baseline process, so that the
+  JPU can encode image data and decode JPEG data quickly.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,jpu-r8a7790      # R-Car H2
+          - renesas,jpu-r8a7791      # R-Car M2-W
+          - renesas,jpu-r8a7792      # R-Car V2H
+          - renesas,jpu-r8a7793      # R-Car M2-N
+      - const: renesas,rcar-gen2-jpu # R-Car Gen2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    jpeg-codec@fe980000 {
+            compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
+            reg = <0xfe980000 0x10300>;
+            interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 106>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 106>;
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt
deleted file mode 100644
index 5eefd62ac5c5..000000000000
--- a/Documentation/devicetree/bindings/media/renesas,vin.txt
+++ /dev/null
@@ -1,217 +0,0 @@
-Renesas R-Car Video Input driver (rcar_vin)
--------------------------------------------
-
-The rcar_vin device provides video input capabilities for the Renesas R-Car
-family of devices.
-
-Each VIN instance has a single parallel input that supports RGB and YUV video,
-with both external synchronization and BT.656 synchronization for the latter.
-Depending on the instance the VIN input is connected to external SoC pins, or
-on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
-
- - compatible: Must be one or more of the following
-   - "renesas,vin-r8a7743" for the R8A7743 device
-   - "renesas,vin-r8a7744" for the R8A7744 device
-   - "renesas,vin-r8a7745" for the R8A7745 device
-   - "renesas,vin-r8a77470" for the R8A77470 device
-   - "renesas,vin-r8a774a1" for the R8A774A1 device
-   - "renesas,vin-r8a774b1" for the R8A774B1 device
-   - "renesas,vin-r8a774c0" for the R8A774C0 device
-   - "renesas,vin-r8a7778" for the R8A7778 device
-   - "renesas,vin-r8a7779" for the R8A7779 device
-   - "renesas,vin-r8a7790" for the R8A7790 device
-   - "renesas,vin-r8a7791" for the R8A7791 device
-   - "renesas,vin-r8a7792" for the R8A7792 device
-   - "renesas,vin-r8a7793" for the R8A7793 device
-   - "renesas,vin-r8a7794" for the R8A7794 device
-   - "renesas,vin-r8a7795" for the R8A7795 device
-   - "renesas,vin-r8a7796" for the R8A7796 device
-   - "renesas,vin-r8a77965" for the R8A77965 device
-   - "renesas,vin-r8a77970" for the R8A77970 device
-   - "renesas,vin-r8a77980" for the R8A77980 device
-   - "renesas,vin-r8a77990" for the R8A77990 device
-   - "renesas,vin-r8a77995" for the R8A77995 device
-   - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible
-     device.
-
-   When compatible with the generic version nodes must list the
-   SoC-specific version corresponding to the platform first
-   followed by the generic version.
-
- - reg: the register base and size for the device registers
- - interrupts: the interrupt for the device
- - clocks: Reference to the parent clock
-
-The per-board settings for Gen2 and RZ/G1 platforms:
-
-- port - sub-node describing a single endpoint connected to the VIN
-  from external SoC pins as described in video-interfaces.txt[1].
-  Only the first one will be considered as each vin interface has one
-  input port.
-
-  - Optional properties for endpoint nodes:
-    - hsync-active: see [1] for description. Default is active high.
-    - vsync-active: see [1] for description. Default is active high.
-      If both HSYNC and VSYNC polarities are not specified, embedded
-      synchronization is selected.
-    - field-active-even: see [1] for description. Default is active high.
-    - bus-width: see [1] for description. The selected bus width depends on
-      the SoC type and selected input image format.
-      Valid values are: 8, 10, 12, 16, 24 and 32.
-    - data-shift: see [1] for description. Valid values are 0 and 8.
-    - data-enable-active: polarity of CLKENB signal, see [1] for
-      description. Default is active high.
-
-The per-board settings for Gen3 and RZ/G2 platforms:
-
-Gen3 and RZ/G2 platforms can support both a single connected parallel input
-source from external SoC pins (port@0) and/or multiple parallel input sources
-from local SoC CSI-2 receivers (port@1) depending on SoC.
-
-- renesas,id - ID number of the VIN, VINx in the documentation.
-- ports
-    - port@0 - sub-node describing a single endpoint connected to the VIN
-      from external SoC pins as described in video-interfaces.txt[1].
-      Describing more than one endpoint in port@0 is invalid. Only VIN
-      instances that are connected to external pins should have port@0.
-
-      Endpoint nodes of port@0 support the optional properties listed in
-      the Gen2 per-board settings description.
-
-    - port@1 - sub-nodes describing one or more endpoints connected to
-      the VIN from local SoC CSI-2 receivers. The endpoint numbers must
-      use the following schema.
-
-        - endpoint@0 - sub-node describing the endpoint connected to CSI20
-        - endpoint@1 - sub-node describing the endpoint connected to CSI21
-        - endpoint@2 - sub-node describing the endpoint connected to CSI40
-        - endpoint@3 - sub-node describing the endpoint connected to CSI41
-
-      Endpoint nodes of port@1 do not support any optional endpoint property.
-
-Device node example for Gen2 platforms
---------------------------------------
-
-        aliases {
-                vin0 = &vin0;
-        };
-
-        vin0: vin@e6ef0000 {
-                compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
-                clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
-                reg = <0 0xe6ef0000 0 0x1000>;
-                interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
-                status = "disabled";
-        };
-
-Board setup example for Gen2 platforms (vin1 composite video input)
--------------------------------------------------------------------
-
-&i2c2   {
-        status = "okay";
-        pinctrl-0 = <&i2c2_pins>;
-        pinctrl-names = "default";
-
-        adv7180@20 {
-                compatible = "adi,adv7180";
-                reg = <0x20>;
-                remote = <&vin1>;
-
-                port {
-                        adv7180: endpoint {
-                                bus-width = <8>;
-                                remote-endpoint = <&vin1ep0>;
-                        };
-                };
-        };
-};
-
-/* composite video input */
-&vin1 {
-        pinctrl-0 = <&vin1_pins>;
-        pinctrl-names = "default";
-
-        status = "okay";
-
-        port {
-                vin1ep0: endpoint {
-                        remote-endpoint = <&adv7180>;
-                        bus-width = <8>;
-                };
-        };
-};
-
-Device node example for Gen3 platforms
---------------------------------------
-
-        vin0: video@e6ef0000 {
-                compatible = "renesas,vin-r8a7795";
-                reg = <0 0xe6ef0000 0 0x1000>;
-                interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&cpg CPG_MOD 811>;
-                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-                resets = <&cpg 811>;
-                renesas,id = <0>;
-
-                ports {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-
-                        port@1 {
-                                #address-cells = <1>;
-                                #size-cells = <0>;
-
-                                reg = <1>;
-
-                                vin0csi20: endpoint@0 {
-                                        reg = <0>;
-                                        remote-endpoint= <&csi20vin0>;
-                                };
-                                vin0csi21: endpoint@1 {
-                                        reg = <1>;
-                                        remote-endpoint= <&csi21vin0>;
-                                };
-                                vin0csi40: endpoint@2 {
-                                        reg = <2>;
-                                        remote-endpoint= <&csi40vin0>;
-                                };
-                        };
-                };
-        };
-
-        csi20: csi2@fea80000 {
-                compatible = "renesas,r8a7795-csi2";
-                reg = <0 0xfea80000 0 0x10000>;
-                interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&cpg CPG_MOD 714>;
-                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-                resets = <&cpg 714>;
-
-                ports {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-
-                        port@0 {
-                                reg = <0>;
-                                csi20_in: endpoint {
-                                        clock-lanes = <0>;
-                                        data-lanes = <1>;
-                                        remote-endpoint = <&adv7482_txb>;
-                                };
-                        };
-
-                        port@1 {
-                                #address-cells = <1>;
-                                #size-cells = <0>;
-
-                                reg = <1>;
-
-                                csi20vin0: endpoint@0 {
-                                        reg = <0>;
-                                        remote-endpoint = <&vin0csi20>;
-                                };
-                        };
-                };
-        };
-
-[1] video-interfaces.txt common video media interface
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
new file mode 100644
index 000000000000..c0442e79cbb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -0,0 +1,356 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,vin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Video Input (VIN)
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The R-Car Video Input (VIN) device provides video input capabilities for the
+  Renesas R-Car family of devices.
+
+  Each VIN instance has a single parallel input that supports RGB and YUV video,
+  with both external synchronization and BT.656 synchronization for the latter.
+  Depending on the instance the VIN input is connected to external SoC pins, or
+  on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,vin-r8a7742  # RZ/G1H
+              - renesas,vin-r8a7743  # RZ/G1M
+              - renesas,vin-r8a7744  # RZ/G1N
+              - renesas,vin-r8a7745  # RZ/G1E
+              - renesas,vin-r8a77470 # RZ/G1C
+              - renesas,vin-r8a7790  # R-Car H2
+              - renesas,vin-r8a7791  # R-Car M2-W
+              - renesas,vin-r8a7792  # R-Car V2H
+              - renesas,vin-r8a7793  # R-Car M2-N
+              - renesas,vin-r8a7794  # R-Car E2
+          - const: renesas,rcar-gen2-vin # Generic R-Car Gen2 or RZ/G1
+
+      - items:
+          - enum:
+              - renesas,vin-r8a774a1 # RZ/G2M
+              - renesas,vin-r8a774b1 # RZ/G2N
+              - renesas,vin-r8a774c0 # RZ/G2E
+              - renesas,vin-r8a774e1 # RZ/G2H
+              - renesas,vin-r8a7778  # R-Car M1
+              - renesas,vin-r8a7779  # R-Car H1
+              - renesas,vin-r8a7795  # R-Car H3
+              - renesas,vin-r8a7796  # R-Car M3-W
+              - renesas,vin-r8a77961 # R-Car M3-W+
+              - renesas,vin-r8a77965 # R-Car M3-N
+              - renesas,vin-r8a77970 # R-Car V3M
+              - renesas,vin-r8a77980 # R-Car V3H
+              - renesas,vin-r8a77990 # R-Car E3
+              - renesas,vin-r8a77995 # R-Car D3
+              - renesas,vin-r8a779a0 # R-Car V3U
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  #The per-board settings for Gen2 and RZ/G1 platforms:
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      A node containing a parallel input
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          hsync-active:
+            description:
+              If both HSYNC and VSYNC polarities are not specified, embedded
+              synchronization is selected.
+            default: 1
+
+          vsync-active:
+            description:
+              If both HSYNC and VSYNC polarities are not specified, embedded
+              synchronization is selected.
+            default: 1
+
+          field-active-even: true
+
+          bus-width: true
+
+          data-shift: true
+
+          data-enable-active:
+            description: Polarity of CLKENB signal
+            default: 1
+
+          pclk-sample: true
+
+          data-active: true
+
+  #The per-board settings for Gen3 and RZ/G2 platforms:
+  renesas,id:
+    description: VIN channel number
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing a parallel input source.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              hsync-active:
+                description:
+                  If both HSYNC and VSYNC polarities are not specified, embedded
+                  synchronization is selected.
+                default: 1
+
+              vsync-active:
+                description:
+                  If both HSYNC and VSYNC polarities are not specified, embedded
+                  synchronization is selected.
+                default: 1
+
+              field-active-even: true
+
+              bus-width: true
+
+              data-shift: true
+
+              data-enable-active:
+                description: Polarity of CLKENB signal
+                default: 1
+
+              pclk-sample: true
+
+              data-active: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node, multiple endpoints describing all the R-Car CSI-2
+          modules connected the VIN.
+
+        properties:
+          endpoint@0:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to CSI20.
+
+          endpoint@1:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to CSI21.
+
+          endpoint@2:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to CSI40.
+
+          endpoint@3:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to CSI41.
+
+        anyOf:
+          - required:
+              - endpoint@0
+          - required:
+              - endpoint@1
+          - required:
+              - endpoint@2
+          - required:
+              - endpoint@3
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node, multiple endpoints describing all the R-Car ISP
+          modules connected the VIN.
+
+        properties:
+          endpoint@0:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to ISP0.
+
+          endpoint@1:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to ISP1.
+
+          endpoint@2:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to ISP2.
+
+          endpoint@3:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to ISP3.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,vin-r8a7778
+                - renesas,vin-r8a7779
+    then:
+      required:
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,vin-r8a7778
+              - renesas,vin-r8a7779
+              - renesas,rcar-gen2-vin
+    then:
+      required:
+        - port
+    else:
+      required:
+        - renesas,id
+        - ports
+
+additionalProperties: false
+
+examples:
+  # Device node example for Gen2 platform
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    vin1: vin@e6ef1000 {
+            compatible = "renesas,vin-r8a7790",
+                         "renesas,rcar-gen2-vin";
+            reg = <0xe6ef1000 0x1000>;
+            interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 810>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 810>;
+
+            port {
+                    vin1ep0: endpoint {
+                            remote-endpoint = <&adv7180>;
+                            bus-width = <8>;
+                    };
+            };
+    };
+
+  # Device node example for Gen3 platform with only CSI-2
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    vin0: video@e6ef0000 {
+            compatible = "renesas,vin-r8a7795";
+            reg = <0xe6ef0000 0x1000>;
+            interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 811>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 811>;
+            renesas,id = <0>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@1 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <1>;
+
+                            vin0csi20: endpoint@0 {
+                                    reg = <0>;
+                                    remote-endpoint= <&csi20vin0>;
+                            };
+                            vin0csi40: endpoint@2 {
+                                    reg = <2>;
+                                    remote-endpoint= <&csi40vin0>;
+                            };
+                    };
+            };
+    };
+
+  # Device node example for Gen3 platform with CSI-2 and parallel
+  - |
+    #include <dt-bindings/clock/r8a77970-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a77970-sysc.h>
+
+    vin2: video@e6ef2000 {
+            compatible = "renesas,vin-r8a77970";
+            reg = <0xe6ef2000 0x1000>;
+            interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 809>;
+            power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+            resets = <&cpg 809>;
+            renesas,id = <2>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                            reg = <0>;
+
+                            vin2_in: endpoint {
+                                    remote-endpoint = <&adv7612_out>;
+                                    hsync-active = <0>;
+                                    vsync-active = <0>;
+                            };
+                    };
+
+                    port@1 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <1>;
+
+                            vin2csi40: endpoint@2 {
+                                    reg = <2>;
+                                    remote-endpoint = <&csi40vin2>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
deleted file mode 100644
index cd5a955b2ea0..000000000000
--- a/Documentation/devicetree/bindings/media/renesas,vsp1.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Renesas VSP Video Processing Engine
-
-The VSP is a video processing engine that supports up-/down-scaling, alpha
-blending, color space conversion and various other image processing features.
-It can be found in the Renesas R-Car Gen2, R-Car Gen3, RZ/G1, and RZ/G2 SoCs.
-
-Required properties:
-
-  - compatible: Must contain one of the following values
-    - "renesas,vsp1" for the R-Car Gen2 and RZ/G1 VSP1
-    - "renesas,vsp2" for the R-Car Gen3 and RZ/G2 VSP2
-
-  - reg: Base address and length of the registers block for the VSP.
-  - interrupts: VSP interrupt specifier.
-  - clocks: A phandle + clock-specifier pair for the VSP functional clock.
-
-Optional properties:
-
-  - renesas,fcp: A phandle referencing the FCP that handles memory accesses
-                 for the VSP. Not needed on Gen2, mandatory on Gen3.
-
-
-Example: R8A7790 (R-Car H2) VSP1-S node
-
-	vsp@fe928000 {
-		compatible = "renesas,vsp1";
-		reg = <0 0xfe928000 0 0x8000>;
-		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
-	};
diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
new file mode 100644
index 000000000000..7a8f32473852
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,vsp1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas VSP Video Processing Engine
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description:
+  The VSP is a video processing engine that supports up-/down-scaling, alpha
+  blending, color space conversion and various other image processing features.
+  It can be found in the Renesas R-Car Gen2, R-Car Gen3, RZ/G1, and RZ/G2 SoCs.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r9a07g044-vsp2 # RZ/G2L
+      - renesas,vsp1 # R-Car Gen2 and RZ/G1
+      - renesas,vsp2 # R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: true
+  clock-names: true
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,fcp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle referencing the FCP that handles memory accesses for the VSP.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,vsp1
+    then:
+      properties:
+        renesas,fcp: false
+    else:
+      required:
+        - renesas,fcp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g044-vsp2
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Main clock
+            - description: Register access clock
+            - description: Video clock
+        clock-names:
+          items:
+            - const: aclk
+            - const: pclk
+            - const: vclk
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names: false
+
+examples:
+  # R8A7790 (R-Car H2) VSP1-S
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    vsp@fe928000 {
+        compatible = "renesas,vsp1";
+        reg = <0xfe928000 0x8000>;
+        interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 131>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 131>;
+    };
+
+  # R8A77951 (R-Car H3) VSP2-BC
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    vsp@fe920000 {
+        compatible = "renesas,vsp2";
+        reg = <0xfe920000 0x8000>;
+        interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 624>;
+        power-domains = <&sysc R8A7795_PD_A3VP>;
+        resets = <&cpg 624>;
+
+        renesas,fcp = <&fcpvb1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml
new file mode 100644
index 000000000000..81b26eb4cd35
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/rockchip,rk3568-vepu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Hantro G1 VPU encoders implemented on Rockchip SoCs
+
+maintainers:
+  - Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
+
+description:
+  Hantro G1 video encode-only accelerators present on Rockchip SoCs.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-vepu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3568-power.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        vepu: video-codec@fdee0000 {
+            compatible = "rockchip,rk3568-vepu";
+            reg = <0x0 0xfdee0000 0x0 0x800>;
+            interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>;
+            clock-names = "aclk", "hclk";
+            iommus = <&vepu_mmu>;
+            power-domains = <&power RK3568_PD_RGA>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
new file mode 100644
index 000000000000..08b02ec16755
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip,vdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Video Decoder (VDec)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |-
+  The Rockchip rk3399 has a stateless Video Decoder that can decodes H.264,
+  HEVC an VP9 streams.
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3399-vdec
+      - items:
+          - enum:
+              - rockchip,rk3228-vdec
+              - rockchip,rk3328-vdec
+          - const: rockchip,rk3399-vdec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The Video Decoder AXI interface clock
+      - description: The Video Decoder AHB interface clock
+      - description: The Video Decoded CABAC clock
+      - description: The Video Decoder core clock
+
+  clock-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: cabac
+      - const: core
+
+  assigned-clocks: true
+
+  assigned-clock-rates: true
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/power/rk3399-power.h>
+
+    vdec: video-codec@ff660000 {
+        compatible = "rockchip,rk3399-vdec";
+        reg = <0xff660000 0x400>;
+        interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
+                 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
+        clock-names = "axi", "ahb", "cabac", "core";
+        power-domains = <&power RK3399_PD_VDU>;
+        iommus = <&vdec_mmu>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
new file mode 100644
index 000000000000..b3661d7d4357
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -0,0 +1,286 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip-isp1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC Image Signal Processing unit v1
+
+maintainers:
+  - Helen Koike <helen.koike@collabora.com>
+
+description: |
+  Rockchip ISP1 is the Camera interface for the Rockchip series of SoCs
+  which contains image processing, scaling, and compression functions.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-cif-isp
+      - rockchip,rk3399-cif-isp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: isp
+      - const: mi
+      - const: mipi
+
+  clocks:
+    minItems: 3
+    items:
+      # isp0 and isp1
+      - description: ISP clock
+      - description: ISP AXI clock
+      - description: ISP AHB clock
+      # only for isp1
+      - description: ISP Pixel clock
+
+  clock-names:
+    minItems: 3
+    items:
+      # isp0 and isp1
+      - const: isp
+      - const: aclk
+      - const: hclk
+      # only for isp1
+      - const: pclk
+
+  iommus:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+    description: phandle for the PHY port
+
+  phy-names:
+    const: dphy
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: connection point for sensors at MIPI-DPHY RX0
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: connection point for input on the parallel interface
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+        required:
+          - bus-type
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+  - phys
+  - phy-names
+  - power-domains
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-cif-isp
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 4
+        clock-names:
+          minItems: 3
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-cif-isp
+    then:
+      required:
+        - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3399-power.h>
+
+    parent0: parent {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp0: isp0@ff910000 {
+            compatible = "rockchip,rk3399-cif-isp";
+            reg = <0x0 0xff910000 0x0 0x4000>;
+            interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+            clocks = <&cru SCLK_ISP0>,
+                     <&cru ACLK_ISP0_WRAPPER>,
+                     <&cru HCLK_ISP0_WRAPPER>;
+            clock-names = "isp", "aclk", "hclk";
+            iommus = <&isp0_mmu>;
+            phys = <&dphy>;
+            phy-names = "dphy";
+            power-domains = <&power RK3399_PD_ISP0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    mipi_in_wcam: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&wcam_out>;
+                        data-lanes = <1 2>;
+                    };
+
+                    mipi_in_ucam: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&ucam_out>;
+                        data-lanes = <1>;
+                    };
+                };
+            };
+        };
+
+        i2c7: i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            wcam: camera@36 {
+                compatible = "ovti,ov5695";
+                reg = <0x36>;
+
+                port {
+                    wcam_out: endpoint {
+                        remote-endpoint = <&mipi_in_wcam>;
+                        data-lanes = <1 2>;
+                    };
+                };
+            };
+
+            ucam: camera@3c {
+                compatible = "ovti,ov2685";
+                reg = <0x3c>;
+
+                  port {
+                      ucam_out: endpoint {
+                          remote-endpoint = <&mipi_in_ucam>;
+                          data-lanes = <1>;
+                      };
+                  };
+            };
+        };
+    };
+
+  - |
+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/px30-power.h>
+
+    parent1: parent {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp: isp@ff4a0000 {
+            compatible = "rockchip,px30-cif-isp";
+            reg = <0x0 0xff4a0000 0x0 0x8000>;
+            interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "isp", "mi", "mipi";
+            clocks = <&cru SCLK_ISP0>,
+                     <&cru ACLK_ISP0_WRAPPER>,
+                     <&cru HCLK_ISP0_WRAPPER>,
+                     <&cru PCLK_ISP1_WRAPPER>;
+            clock-names = "isp", "aclk", "hclk", "pclk";
+            iommus = <&isp_mmu>;
+            phys = <&csi_dphy>;
+            phy-names = "dphy";
+            power-domains = <&power PX30_PD_VI>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    mipi_in_ucam1: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&ucam1_out>;
+                        data-lanes = <1 2>;
+                    };
+                };
+            };
+        };
+
+        i2c2: i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ov5695: camera@36 {
+                compatible = "ovti,ov5647";
+                reg = <0x36>;
+                clocks = <&cru SCLK_CIF_OUT>;
+
+                port {
+                    ucam1_out: endpoint {
+                        remote-endpoint = <&mipi_in_ucam1>;
+                        data-lanes = <1 2>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.txt b/Documentation/devicetree/bindings/media/rockchip-rga.txt
deleted file mode 100644
index fd5276abfad6..000000000000
--- a/Documentation/devicetree/bindings/media/rockchip-rga.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-device-tree bindings for rockchip 2D raster graphic acceleration controller (RGA)
-
-RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D
-graphics operations, such as point/line drawing, image scaling, rotation,
-BitBLT, alpha blending and image blur/sharpness.
-
-Required properties:
-- compatible: value should be one of the following
-		"rockchip,rk3288-rga";
-		"rockchip,rk3399-rga";
-
-- interrupts: RGA interrupt specifier.
-
-- clocks: phandle to RGA sclk/hclk/aclk clocks
-
-- clock-names: should be "aclk", "hclk" and "sclk"
-
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: should be "core", "axi" and "ahb"
-
-Example:
-SoC-specific DT entry:
-	rga: rga@ff680000 {
-		compatible = "rockchip,rk3399-rga";
-		reg = <0xff680000 0x10000>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
-		clock-names = "aclk", "hclk", "sclk";
-
-		resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
-		reset-names = "core, "axi", "ahb";
-	};
diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.yaml b/Documentation/devicetree/bindings/media/rockchip-rga.yaml
new file mode 100644
index 000000000000..dd645ddccb07
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip-rga.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip-rga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip 2D raster graphic acceleration controller (RGA)
+
+description:
+  RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D
+  graphics operations, such as point/line drawing, image scaling, rotation,
+  BitBLT, alpha blending and image blur/sharpness.
+
+maintainers:
+  - Jacob Chen <jacob-chen@iotwrt.com>
+  - Ezequiel Garcia <ezequiel@collabora.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3288-rga
+      - const: rockchip,rk3399-rga
+      - items:
+          - const: rockchip,rk3228-rga
+          - const: rockchip,rk3288-rga
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: sclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: core
+      - const: axi
+      - const: ahb
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3399-power.h>
+    rga: rga@ff680000 {
+      compatible = "rockchip,rk3399-rga";
+      reg = <0xff680000 0x10000>;
+      interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_RGA>,
+               <&cru HCLK_RGA>,
+               <&cru SCLK_RGA_CORE>;
+      clock-names = "aclk", "hclk", "sclk";
+      power-domains = <&power RK3399_PD_RGA>;
+      resets = <&cru SRST_RGA_CORE>,
+               <&cru SRST_A_RGA>,
+               <&cru SRST_H_RGA>;
+      reset-names = "core", "axi", "ahb";
+    };
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.txt b/Documentation/devicetree/bindings/media/rockchip-vpu.txt
deleted file mode 100644
index 339252d9c515..000000000000
--- a/Documentation/devicetree/bindings/media/rockchip-vpu.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-device-tree bindings for rockchip VPU codec
-
-Rockchip (Video Processing Unit) present in various Rockchip platforms,
-such as RK3288, RK3328 and RK3399.
-
-Required properties:
-- compatible: value should be one of the following
-		"rockchip,rk3288-vpu";
-		"rockchip,rk3328-vpu";
-		"rockchip,rk3399-vpu";
-- interrupts: encoding and decoding interrupt specifiers
-- interrupt-names: should be
-		"vepu", "vdpu" on RK3288 and RK3399,
-		"vdpu" on RK3328.
-- clocks: phandle to VPU aclk, hclk clocks
-- clock-names: should be "aclk" and "hclk"
-- power-domains: phandle to power domain node
-- iommus: phandle to a iommu node
-
-Example:
-SoC-specific DT entry:
-	vpu: video-codec@ff9a0000 {
-		compatible = "rockchip,rk3288-vpu";
-		reg = <0x0 0xff9a0000 0x0 0x800>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vepu", "vdpu";
-		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
-		clock-names = "aclk", "hclk";
-		power-domains = <&power RK3288_PD_VIDEO>;
-		iommus = <&vpu_mmu>;
-	};
-
-	vpu: video-codec@ff350000 {
-		compatible = "rockchip,rk3328-vpu";
-		reg = <0x0 0xff350000 0x0 0x800>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vdpu";
-		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
-		clock-names = "aclk", "hclk";
-		power-domains = <&power RK3328_PD_VPU>;
-		iommus = <&vpu_mmu>;
-	};
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
new file mode 100644
index 000000000000..6cc4d3e5a61d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/rockchip-vpu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Hantro G1 VPU codecs implemented on Rockchip SoCs
+
+maintainers:
+  - Ezequiel Garcia <ezequiel@collabora.com>
+
+description:
+  Hantro G1 video encode and decode accelerators present on Rockchip SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - rockchip,rk3036-vpu
+          - rockchip,rk3066-vpu
+          - rockchip,rk3288-vpu
+          - rockchip,rk3328-vpu
+          - rockchip,rk3399-vpu
+          - rockchip,px30-vpu
+          - rockchip,rk3568-vpu
+      - items:
+          - const: rockchip,rk3188-vpu
+          - const: rockchip,rk3066-vpu
+      - items:
+          - const: rockchip,rk3228-vpu
+          - const: rockchip,rk3399-vpu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    oneOf:
+      - const: vdpu
+      - items:
+          - const: vepu
+          - const: vdpu
+
+  clocks:
+    oneOf:
+      - maxItems: 2
+      - maxItems: 4
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: aclk
+          - const: hclk
+      - items:
+          - const: aclk_vdpu
+          - const: hclk_vdpu
+          - const: aclk_vepu
+          - const: hclk_vepu
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/rk3288-cru.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/power/rk3288-power.h>
+
+        vpu: video-codec@ff9a0000 {
+                compatible = "rockchip,rk3288-vpu";
+                reg = <0xff9a0000 0x800>;
+                interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-names = "vepu", "vdpu";
+                clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+                clock-names = "aclk", "hclk";
+                power-domains = <&power RK3288_PD_VIDEO>;
+                iommus = <&vpu_mmu>;
+        };
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml
new file mode 100644
index 000000000000..878397830a4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos5250-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC G-Scaler
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Seung-Woo Kim <sw0312.kim@samsung.com
+
+description:
+  G-Scaler is used for scaling and color space conversion on Samsung Exynos
+  SoCs.
+
+  Each G-Scaler node should have a numbered alias in the aliases node, in the
+  form of gscN, N = 0...3.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - samsung,exynos5250-gsc
+              - samsung,exynos5420-gsc
+          - const: samsung,exynos5-gsc
+      - enum:
+          - samsung,exynos5433-gsc
+      - const: samsung,exynos5-gsc
+        deprecated: True
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Syscon used to control the system registers to set writeback input and destination.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5-gsc
+              - samsung,exynos5250-gsc
+              - samsung,exynos5420-gsc
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: gscl
+    else:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+            - const: aclk_gsclbend
+            - const: gsd
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    video-scaler@13e00000 {
+        compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+        reg = <0x13e00000 0x1000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_gsc>;
+        clocks = <&clock CLK_GSCL0>;
+        clock-names = "gscl";
+        iommus = <&sysmmu_gsc0>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
new file mode 100644
index 000000000000..e28d6ec56c0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,s5pv210-jpeg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 and Exynos SoC JPEG codec
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-jpeg
+      - samsung,exynos3250-jpeg
+      - samsung,exynos4210-jpeg
+      - samsung,exynos4212-jpeg
+      - samsung,exynos5420-jpeg
+      - samsung,exynos5433-jpeg
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s5pv210-jpeg
+              - samsung,exynos4210-jpeg
+              - samsung,exynos4212-jpeg
+              - samsung,exynos5420-jpeg
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: jpeg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-jpeg
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: jpeg
+            - const: sclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-jpeg
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+            - const: sclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    codec@15020000 {
+        compatible = "samsung,exynos5433-jpeg";
+        reg = <0x15020000 0x10000>;
+        interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "pclk", "aclk", "aclk_xiu", "sclk";
+        clocks = <&cmu_mscl CLK_PCLK_JPEG>,
+                 <&cmu_mscl CLK_ACLK_JPEG>,
+                 <&cmu_mscl CLK_ACLK_XIU_MSCLX>,
+                 <&cmu_mscl CLK_SCLK_JPEG>;
+        iommus = <&sysmmu_jpeg>;
+        power-domains = <&pd_mscl>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
index f91b9dc80eb3..20447529c985 100644
--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt
@@ -95,7 +95,7 @@ Optional properties:
 
 This node should contain child 'port' nodes specifying active parallel video
 input ports. It includes camera A and camera B inputs. 'reg' property in the
-port nodes specifies data input - 0, 1 indicates input A, B respectively.
+port nodes specifies data input - 1, 2 indicates input A, B respectively.
 
 Optional properties
 
@@ -172,8 +172,8 @@ Example:
 		/* parallel camera ports */
 		parallel-ports {
 			/* camera A input */
-			port@0 {
-				reg = <0>;
+			port@1 {
+				reg = <1>;
 				fimc0_ep: endpoint {
 					remote-endpoint = <&s5k6aa_ep>;
 					bus-width = <8>;
diff --git a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/st,stm32-cec.yaml
index d75019c093a4..77144cc6f7db 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-cec.yaml
@@ -7,8 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 CEC bindings
 
 maintainers:
-  - Benjamin Gaignard <benjamin.gaignard@st.com>
-  - Yannick Fertre <yannick.fertre@st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
index 3fe778cb5cc3..9c1262a276b5 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI) binding
 
 maintainers:
-  - Hugues Fruchet <hugues.fruchet@st.com>
+  - Hugues Fruchet <hugues.fruchet@foss.st.com>
 
 properties:
   compatible:
@@ -37,12 +37,41 @@ properties:
     maxItems: 1
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
     description:
-      DCMI supports a single port node with parallel bus. It should contain
-      one 'port' child node with child 'endpoint' node. Please refer to the
-      bindings defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
+      DCMI supports a single port node with parallel bus.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+            default: 5
+
+          bus-width:
+            enum: [8, 10, 12, 14]
+            default: 8
+
+        allOf:
+          - if:
+              properties:
+                bus-type:
+                  const: 6
+
+            then:
+              properties:
+                hsync-active: false
+                vsync-active: false
+                bus-width:
+                  enum: [8]
+
+        required:
+          - bus-type
+          - pclk-sample
 
 required:
   - compatible
@@ -75,6 +104,7 @@ examples:
         port {
              dcmi_0: endpoint {
                    remote-endpoint = <&ov5640_0>;
+                   bus-type = <5>;
                    bus-width = <8>;
                    hsync-active = <0>;
                    vsync-active = <0>;
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
new file mode 100644
index 000000000000..f97b4a246605
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32-dma2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Chrom-Art Accelerator DMA2D binding
+
+description:
+  Chrom-ART Accelerator(DMA2D), graphical hardware accelerator
+  enabling enhanced graphical user interface with minimum CPU load
+
+  It can perform the following operations.
+
+  - Filling a part or the whole of a destination image with a specific color.
+  - Copying a part or the whole of a source image into a part or the whole of
+    a destination image.
+  - Copying a part or the whole of a source image into a part or the whole of
+    a destination image with a pixel format conversion.
+  - Blending a part and/or two complete source images with different pixel
+    format and copy the result into a part or the whole of a destination image
+    with a different color format. (TODO)
+
+
+maintainers:
+  - Dillon Min <dillon.minfei@gmail.com>
+
+properties:
+  compatible:
+    const: st,stm32-dma2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dma2d
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    #include <dt-bindings/mfd/stm32f4-rcc.h>
+    dma2d: dma2d@4002b000 {
+        compatible = "st,stm32-dma2d";
+        reg = <0x4002b000 0xc00>;
+        interrupts = <90>;
+        resets = <&rcc STM32F4_AHB1_RESET(DMA2D)>;
+        clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2D)>;
+        clock-names = "dma2d";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/tango-ir.txt b/Documentation/devicetree/bindings/media/tango-ir.txt
deleted file mode 100644
index a9f00c2bf897..000000000000
--- a/Documentation/devicetree/bindings/media/tango-ir.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Sigma Designs Tango IR NEC/RC-5/RC-6 decoder (SMP86xx and SMP87xx)
-
-Required properties:
-
-- compatible: "sigma,smp8642-ir"
-- reg: address/size of NEC+RC5 area, address/size of RC6 area
-- interrupts: spec for IR IRQ
-- clocks: spec for IR clock (typically the crystal oscillator)
-
-Optional properties:
-
-- linux,rc-map-name: see Documentation/devicetree/bindings/media/rc.txt
-
-Example:
-
-	ir@10518 {
-		compatible = "sigma,smp8642-ir";
-		reg = <0x10518 0x18>, <0x105e0 0x1c>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&xtal>;
-	};
diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
index 5e066629287d..f8e4d260d10a 100644
--- a/Documentation/devicetree/bindings/media/ti,cal.yaml
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/ti,cal.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL) Device Tree Bindings
+title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
 
 maintainers:
   - Benoit Parrot <bparrot@ti.com>
@@ -15,10 +15,7 @@ description: |-
   processing capability to connect CSI2 image-sensor modules to the
   DRA72x device.
 
-  CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
-  should contain a 'port' child node with child 'endpoint' node. Please
-  refer to the bindings defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
+  CAL supports 2 camera port nodes on MIPI bus.
 
 properties:
   compatible:
@@ -51,6 +48,10 @@ properties:
 
   ti,camerrx-control:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: phandle to device control module
+          - description: offset to the control_camerarx_core register
     description:
       phandle to the device control module and offset to the
       control_camerarx_core register
@@ -67,31 +68,19 @@ properties:
       Documentation/devicetree/bindings/power/power_domain.txt
     maxItems: 1
 
-  # See ./video-interfaces.txt for details
   ports:
-    type: object
-    additionalProperties: false
+    $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       port@0:
-        type: object
-        additionalProperties: false
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI2 Port #0
 
         properties:
-          reg:
-            const: 0
-            description: CSI2 Port #0
-
-        patternProperties:
           endpoint:
-            type: object
-            additionalProperties: false
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
 
             properties:
               clock-lanes:
@@ -101,24 +90,15 @@ properties:
                 minItems: 1
                 maxItems: 4
 
-              remote-endpoint: true
-
-        required:
-          - reg
-
       port@1:
-        type: object
-        additionalProperties: false
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI2 Port #1
 
         properties:
-          reg:
-            const: 1
-            description: CSI2 Port #1
-
-        patternProperties:
           endpoint:
-            type: object
-            additionalProperties: false
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
 
             properties:
               clock-lanes:
@@ -128,14 +108,7 @@ properties:
                 minItems: 1
                 maxItems: 4
 
-              remote-endpoint: true
-
-        required:
-          - reg
-
     required:
-      - "#address-cells"
-      - "#size-cells"
       - port@0
 
 required:
@@ -185,7 +158,9 @@ examples:
         camera-sensor@3c {
                compatible = "ovti,ov5640";
                reg = <0x3c>;
-
+               AVDD-supply = <&reg_2p8v>;
+               DOVDD-supply = <&reg_1p8v>;
+               DVDD-supply = <&reg_1p5v>;
                clocks = <&clk_ov5640_fixed>;
                clock-names = "xclk";
 
diff --git a/Documentation/devicetree/bindings/media/ti,vpe.yaml b/Documentation/devicetree/bindings/media/ti,vpe.yaml
index f3a8a350e85f..7fa8a367ed22 100644
--- a/Documentation/devicetree/bindings/media/ti,vpe.yaml
+++ b/Documentation/devicetree/bindings/media/ti,vpe.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/ti,vpe.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments DRA7x Video Processing Engine (VPE) Device Tree Bindings
+title: Texas Instruments DRA7x Video Processing Engine (VPE)
 
 maintainers:
   - Benoit Parrot <bparrot@ti.com>
@@ -17,7 +17,7 @@ description: |-
 
 properties:
   compatible:
-      const: ti,dra7-vpe
+    const: ti,dra7-vpe
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
new file mode 100644
index 000000000000..4527f56a5a6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
@@ -0,0 +1,406 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/video-interface-devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common bindings for video receiver and transmitter devices
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+properties:
+  flash-leds:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      An array of phandles, each referring to a flash LED, a sub-node of the LED
+      driver device node.
+
+  lens-focus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle to the node of the focus lens controller.
+
+  rotation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 90, 180, 270 ]
+    description: |
+      The camera rotation is expressed as the angular difference in degrees
+      between two reference systems, one relative to the camera module, and one
+      defined on the external world scene to be captured when projected on the
+      image sensor pixel array.
+
+      A camera sensor has a 2-dimensional reference system 'Rc' defined by its
+      pixel array read-out order. The origin is set to the first pixel being
+      read out, the X-axis points along the column read-out direction towards
+      the last columns, and the Y-axis along the row read-out direction towards
+      the last row.
+
+      A typical example for a sensor with a 2592x1944 pixel array matrix
+      observed from the front is:
+
+              2591       X-axis          0
+                <------------------------+ 0
+                .......... ... ..........!
+                .......... ... ..........! Y-axis
+                           ...           !
+                .......... ... ..........!
+                .......... ... ..........! 1943
+                                         V
+
+      The external world scene reference system 'Rs' is a 2-dimensional
+      reference system on the focal plane of the camera module. The origin is
+      placed on the top-left corner of the visible scene, the X-axis points
+      towards the right, and the Y-axis points towards the bottom of the scene.
+      The top, bottom, left and right directions are intentionally not defined
+      and depend on the environment in which the camera is used.
+
+      A typical example of a (very common) picture of a shark swimming from left
+      to right, as seen from the camera, is:
+
+               0               X-axis
+             0 +------------------------------------->
+               !
+               !
+               !
+               !           |\____)\___
+               !           ) _____  __`<
+               !           |/     )/
+               !
+               !
+               !
+               V
+             Y-axis
+
+      with the reference system 'Rs' placed on the camera focal plane:
+
+                                  ¸.·˙!
+                              ¸.·˙    !
+                  _       ¸.·˙        !
+               +-/ \-+¸.·˙            !
+               | (o) |                ! Camera focal plane
+               +-----+˙·.¸            !
+                          ˙·.¸        !
+                              ˙·.¸    !
+                                  ˙·.¸!
+
+      When projected on the sensor's pixel array, the image and the associated
+      reference system 'Rs' are typically (but not always) inverted, due to the
+      camera module's lens optical inversion effect.
+
+      Assuming the above represented scene of the swimming shark, the lens
+      inversion projects the scene and its reference system onto the sensor
+      pixel array, seen from the front of the camera sensor, as follows:
+
+            Y-axis
+               ^
+               !
+               !
+               !
+               !            |\_____)\__
+               !            ) ____  ___.<
+               !            |/    )/
+               !
+               !
+               !
+             0 +------------------------------------->
+               0               X-axis
+
+      Note the shark being upside-down.
+
+      The resulting projected reference system is named 'Rp'.
+
+      The camera rotation property is then defined as the angular difference in
+      the counter-clockwise direction between the camera reference system 'Rc'
+      and the projected scene reference system 'Rp'. It is expressed in degrees
+      as a number in the range [0, 360[.
+
+      Examples
+
+      0 degrees camera rotation:
+
+
+                    Y-Rp
+                     ^
+              Y-Rc   !
+               ^     !
+               !     !
+               !     !
+               !     !
+               !     !
+               !     !
+               !     !
+               !     !
+               !   0 +------------------------------------->
+               !     0               X-Rp
+             0 +------------------------------------->
+               0               X-Rc
+
+
+                                X-Rc                0
+               <------------------------------------+ 0
+                           X-Rp                 0   !
+           <------------------------------------+ 0 !
+                                                !   !
+                                                !   !
+                                                !   !
+                                                !   !
+                                                !   !
+                                                !   !
+                                                !   !
+                                                !   V
+                                                !  Y-Rc
+                                                V
+                                               Y-Rp
+
+      90 degrees camera rotation:
+
+               0        Y-Rc
+             0 +-------------------->
+               !   Y-Rp
+               !    ^
+               !    !
+               !    !
+               !    !
+               !    !
+               !    !
+               !    !
+               !    !
+               !    !
+               !    !
+               !  0 +------------------------------------->
+               !    0              X-Rp
+               !
+               !
+               !
+               !
+               V
+              X-Rc
+
+      180 degrees camera rotation:
+
+                                            0
+       <------------------------------------+ 0
+                        X-Rc                !
+              Y-Rp                          !
+               ^                            !
+               !                            !
+               !                            !
+               !                            !
+               !                            !
+               !                            !
+               !                            !
+               !                            V
+               !                           Y-Rc
+             0 +------------------------------------->
+               0              X-Rp
+
+      270 degrees camera rotation:
+
+               0        Y-Rc
+             0 +-------------------->
+               !                                        0
+               !    <-----------------------------------+ 0
+               !                    X-Rp                !
+               !                                        !
+               !                                        !
+               !                                        !
+               !                                        !
+               !                                        !
+               !                                        !
+               !                                        !
+               !                                        !
+               !                                        V
+               !                                       Y-Rp
+               !
+               !
+               !
+               !
+               V
+              X-Rc
+
+
+      Example one - Webcam
+
+      A camera module installed on the user facing part of a laptop screen
+      casing used for video calls. The captured images are meant to be displayed
+      in landscape mode (width > height) on the laptop screen.
+
+      The camera is typically mounted upside-down to compensate the lens optical
+      inversion effect:
+
+                    Y-Rp
+              Y-Rc   ^
+               ^     !
+               !     !
+               !     !       |\_____)\__
+               !     !       ) ____  ___.<
+               !     !       |/    )/
+               !     !
+               !     !
+               !     !
+               !   0 +------------------------------------->
+               !     0           X-Rp
+             0 +------------------------------------->
+               0            X-Rc
+
+      The two reference systems are aligned, the resulting camera rotation is
+      0 degrees, no rotation correction needs to be applied to the resulting
+      image once captured to memory buffers to correctly display it to users:
+
+               +--------------------------------------+
+               !                                      !
+               !                                      !
+               !                                      !
+               !             |\____)\___              !
+               !             ) _____  __`<            !
+               !             |/     )/                !
+               !                                      !
+               !                                      !
+               !                                      !
+               +--------------------------------------+
+
+      If the camera sensor is not mounted upside-down to compensate for the lens
+      optical inversion, the two reference systems will not be aligned, with
+      'Rp' being rotated 180 degrees relatively to 'Rc':
+
+
+                        X-Rc                0
+       <------------------------------------+ 0
+                                            !
+              Y-Rp                          !
+               ^                            !
+               !                            !
+               !       |\_____)\__          !
+               !       ) ____  ___.<        !
+               !       |/    )/             !
+               !                            !
+               !                            !
+               !                            V
+               !                           Y-Rc
+             0 +------------------------------------->
+               0            X-Rp
+
+      The image once captured to memory will then be rotated by 180 degrees:
+
+               +--------------------------------------+
+               !                                      !
+               !                                      !
+               !                                      !
+               !              __/(_____/|             !
+               !            >.___  ____ (             !
+               !                 \(    \|             !
+               !                                      !
+               !                                      !
+               !                                      !
+               +--------------------------------------+
+
+      A software rotation correction of 180 degrees should be applied to
+      correctly display the image:
+
+               +--------------------------------------+
+               !                                      !
+               !                                      !
+               !                                      !
+               !             |\____)\___              !
+               !             ) _____  __`<            !
+               !             |/     )/                !
+               !                                      !
+               !                                      !
+               !                                      !
+               +--------------------------------------+
+
+      Example two - Phone camera
+
+      A camera installed on the back side of a mobile device facing away from
+      the user. The captured images are meant to be displayed in portrait mode
+      (height > width) to match the device screen orientation and the device
+      usage orientation used when taking the picture.
+
+      The camera sensor is typically mounted with its pixel array longer side
+      aligned to the device longer side, upside-down mounted to compensate for
+      the lens optical inversion effect:
+
+               0        Y-Rc
+             0 +-------------------->
+               !   Y-Rp
+               !    ^
+               !    !
+               !    !
+               !    !
+               !    !            |\_____)\__
+               !    !            ) ____  ___.<
+               !    !            |/    )/
+               !    !
+               !    !
+               !    !
+               !  0 +------------------------------------->
+               !    0                X-Rp
+               !
+               !
+               !
+               !
+               V
+              X-Rc
+
+      The two reference systems are not aligned and the 'Rp' reference system is
+      rotated by 90 degrees in the counter-clockwise direction relatively to the
+      'Rc' reference system.
+
+      The image once captured to memory will be rotated:
+
+               +-------------------------------------+
+               |                 _ _                 |
+               |                \   /                |
+               |                 | |                 |
+               |                 | |                 |
+               |                 |  >                |
+               |                <  |                 |
+               |                 | |                 |
+               |                   .                 |
+               |                  V                  |
+               +-------------------------------------+
+
+      A correction of 90 degrees in counter-clockwise direction has to be
+      applied to correctly display the image in portrait mode on the device
+      screen:
+
+                        +--------------------+
+                        |                    |
+                        |                    |
+                        |                    |
+                        |                    |
+                        |                    |
+                        |                    |
+                        |   |\____)\___      |
+                        |   ) _____  __`<    |
+                        |   |/     )/        |
+                        |                    |
+                        |                    |
+                        |                    |
+                        |                    |
+                        |                    |
+                        +--------------------+
+
+  orientation:
+    description:
+      The orientation of a device (typically an image sensor or a flash LED)
+      describing its mounting position relative to the usage orientation of the
+      system where the device is installed on.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+        # Front. The device is mounted on the front facing side of the system. For
+        # mobile devices such as smartphones, tablets and laptops the front side
+        # is the user facing side.
+      - 0
+        # Back. The device is mounted on the back side of the system, which is
+        # defined as the opposite side of the front facing one.
+      - 1
+        # External. The device is not attached directly to the system but is
+        # attached in a way that allows it to move freely.
+      - 2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index f884ada0bffc..8fcf5f52bf5b 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -1,275 +1 @@
-Common bindings for video receiver and transmitter interfaces
-
-General concept
----------------
-
-Video data pipelines usually consist of external devices, e.g. camera sensors,
-controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
-video DMA engines and video data processors.
-
-SoC internal blocks are described by DT nodes, placed similarly to other SoC
-blocks.  External devices are represented as child nodes of their respective
-bus controller nodes, e.g. I2C.
-
-Data interfaces on all video devices are described by their child 'port' nodes.
-Configuration of a port depends on other devices participating in the data
-transfer and is described by 'endpoint' subnodes.
-
-device {
-	...
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			...
-			endpoint@0 { ... };
-			endpoint@1 { ... };
-		};
-		port@1 { ... };
-	};
-};
-
-If a port can be configured to work with more than one remote device on the same
-bus, an 'endpoint' child node must be provided for each of them.  If more than
-one port is present in a device node or there is more than one endpoint at a
-port, or port node needs to be associated with a selected hardware interface,
-a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
-used.
-
-All 'port' nodes can be grouped under optional 'ports' node, which allows to
-specify #address-cells, #size-cells properties independently for the 'port'
-and 'endpoint' nodes and any child device nodes a device might have.
-
-Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
-phandles.  An endpoint subnode of a device contains all properties needed for
-configuration of this device for data exchange with other device.  In most
-cases properties at the peer 'endpoint' nodes will be identical, however they
-might need to be different when there is any signal modifications on the bus
-between two devices, e.g. there are logic signal inverters on the lines.
-
-It is allowed for multiple endpoints at a port to be active simultaneously,
-where supported by a device.  For example, in case where a data interface of
-a device is partitioned into multiple data busses, e.g. 16-bit input port
-divided into two separate ITU-R BT.656 8-bit busses.  In such case bus-width
-and data-shift properties can be used to assign physical data lines to each
-endpoint node (logical bus).
-
-Documenting bindings for devices
---------------------------------
-
-All required and optional bindings the device supports shall be explicitly
-documented in device DT binding documentation. This also includes port and
-endpoint nodes for the device, including unit-addresses and reg properties where
-relevant.
-
-Please also see Documentation/devicetree/bindings/graph.txt .
-
-Required properties
--------------------
-
-If there is more than one 'port' or more than one 'endpoint' node or 'reg'
-property is present in port and/or endpoint nodes the following properties
-are required in a relevant parent node:
-
- - #address-cells : number of cells required to define port/endpoint
-		    identifier, should be 1.
- - #size-cells    : should be zero.
-
-
-Optional properties
--------------------
-
-- flash-leds: An array of phandles, each referring to a flash LED, a sub-node
-  of the LED driver device node.
-
-- lens-focus: A phandle to the node of the focus lens controller.
-
-- rotation: The device, typically an image sensor, is not mounted upright,
-  but a number of degrees counter clockwise. Typical values are 0 and 180
-  (upside down).
-
-
-Optional endpoint properties
-----------------------------
-
-- remote-endpoint: phandle to an 'endpoint' subnode of a remote device node.
-- slave-mode: a boolean property indicating that the link is run in slave mode.
-  The default when this property is not specified is master mode. In the slave
-  mode horizontal and vertical synchronization signals are provided to the
-  slave device (data source) by the master device (data sink). In the master
-  mode the data source device is also the source of the synchronization signals.
-- bus-type: data bus type. Possible values are:
-  1 - MIPI CSI-2 C-PHY
-  2 - MIPI CSI1
-  3 - CCP2
-  4 - MIPI CSI-2 D-PHY
-  5 - Parallel
-  6 - Bt.656
-- bus-width: number of data lines actively used, valid for the parallel busses.
-- data-shift: on the parallel data busses, if bus-width is used to specify the
-  number of data lines, data-shift can be used to specify which data lines are
-  used, e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used.
-- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
-- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
-  Note, that if HSYNC and VSYNC polarities are not specified, embedded
-  synchronization may be required, where supported.
-- data-active: similar to HSYNC and VSYNC, specifies data line polarity.
-- data-enable-active: similar to HSYNC and VSYNC, specifies the data enable
-  signal polarity.
-- field-even-active: field signal level during the even field data transmission.
-- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
-  signal.
-- sync-on-green-active: active state of Sync-on-green (SoG) signal, 0/1 for
-  LOW/HIGH respectively.
-- data-lanes: an array of physical data lane indexes. Position of an entry
-  determines the logical lane number, while the value of an entry indicates
-  physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have
-  "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0.
-  If the hardware does not support lane reordering, monotonically
-  incremented values shall be used from 0 or 1 onwards, depending on
-  whether or not there is also a clock lane. This property is valid for
-  serial busses only (e.g. MIPI CSI-2).
-- clock-lanes: an array of physical clock lane indexes. Position of an entry
-  determines the logical lane number, while the value of an entry indicates
-  physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;",
-  which places the clock lane on hardware lane 0. This property is valid for
-  serial busses only (e.g. MIPI CSI-2). Note that for the MIPI CSI-2 bus this
-  array contains only one entry.
-- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
-  clock mode.
-- link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for
-  instance, this is the actual frequency of the bus, not bits per clock per
-  lane value. An array of 64-bit unsigned integers.
-- lane-polarities: an array of polarities of the lanes starting from the clock
-  lane and followed by the data lanes in the same order as in data-lanes.
-  Valid values are 0 (normal) and 1 (inverted). The length of the array
-  should be the combined length of data-lanes and clock-lanes properties.
-  If the lane-polarities property is omitted, the value must be interpreted
-  as 0 (normal). This property is valid for serial busses only.
-- strobe: Whether the clock signal is used as clock (0) or strobe (1). Used
-  with CCP2, for instance.
-
-Example
--------
-
-The example snippet below describes two data pipelines.  ov772x and imx074 are
-camera sensors with a parallel and serial (MIPI CSI-2) video bus respectively.
-Both sensors are on the I2C control bus corresponding to the i2c0 controller
-node.  ov772x sensor is linked directly to the ceu0 video host interface.
-imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
-(single) DMA engine writing captured data to memory.  ceu0 node has a single
-'port' node which may indicate that at any time only one of the following data
-pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
-
-	ceu0: ceu@fe910000 {
-		compatible = "renesas,sh-mobile-ceu";
-		reg = <0xfe910000 0xa0>;
-		interrupts = <0x880>;
-
-		mclk: master_clock {
-			compatible = "renesas,ceu-clock";
-			#clock-cells = <1>;
-			clock-frequency = <50000000>;	/* Max clock frequency */
-			clock-output-names = "mclk";
-		};
-
-		port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* Parallel bus endpoint */
-			ceu0_1: endpoint@1 {
-				reg = <1>;		/* Local endpoint # */
-				remote = <&ov772x_1_1>;	/* Remote phandle */
-				bus-width = <8>;	/* Used data lines */
-				data-shift = <2>;	/* Lines 9:2 are used */
-
-				/* If hsync-active/vsync-active are missing,
-				   embedded BT.656 sync is used */
-				hsync-active = <0>;	/* Active low */
-				vsync-active = <0>;	/* Active low */
-				data-active = <1>;	/* Active high */
-				pclk-sample = <1>;	/* Rising */
-			};
-
-			/* MIPI CSI-2 bus endpoint */
-			ceu0_0: endpoint@0 {
-				reg = <0>;
-				remote = <&csi2_2>;
-			};
-		};
-	};
-
-	i2c0: i2c@fff20000 {
-		...
-		ov772x_1: camera@21 {
-			compatible = "ovti,ov772x";
-			reg = <0x21>;
-			vddio-supply = <&regulator1>;
-			vddcore-supply = <&regulator2>;
-
-			clock-frequency = <20000000>;
-			clocks = <&mclk 0>;
-			clock-names = "xclk";
-
-			port {
-				/* With 1 endpoint per port no need for addresses. */
-				ov772x_1_1: endpoint {
-					bus-width = <8>;
-					remote-endpoint = <&ceu0_1>;
-					hsync-active = <1>;
-					vsync-active = <0>; /* Who came up with an
-							       inverter here ?... */
-					data-active = <1>;
-					pclk-sample = <1>;
-				};
-			};
-		};
-
-		imx074: camera@1a {
-			compatible = "sony,imx074";
-			reg = <0x1a>;
-			vddio-supply = <&regulator1>;
-			vddcore-supply = <&regulator2>;
-
-			clock-frequency = <30000000>;	/* Shared clock with ov772x_1 */
-			clocks = <&mclk 0>;
-			clock-names = "sysclk";		/* Assuming this is the
-							   name in the datasheet */
-			port {
-				imx074_1: endpoint {
-					clock-lanes = <0>;
-					data-lanes = <1 2>;
-					remote-endpoint = <&csi2_1>;
-				};
-			};
-		};
-	};
-
-	csi2: csi2@ffc90000 {
-		compatible = "renesas,sh-mobile-csi2";
-		reg = <0xffc90000 0x1000>;
-		interrupts = <0x17a0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			compatible = "renesas,csi2c";	/* One of CSI2I and CSI2C. */
-			reg = <1>;			/* CSI-2 PHY #1 of 2: PHY_S,
-							   PHY_M has port address 0,
-							   is unused. */
-			csi2_1: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <2 1>;
-				remote-endpoint = <&imx074_1>;
-			};
-		};
-		port@2 {
-			reg = <2>;			/* port 2: link to the CEU */
-
-			csi2_2: endpoint {
-				remote-endpoint = <&ceu0_0>;
-			};
-		};
-	};
+This file has moved to video-interfaces.yaml and video-interface-devices.yaml.
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
new file mode 100644
index 000000000000..68c3b9871cf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/video-interfaces.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common bindings for video receiver and transmitter interface endpoints
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  Video data pipelines usually consist of external devices, e.g. camera sensors,
+  controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
+  video DMA engines and video data processors.
+
+  SoC internal blocks are described by DT nodes, placed similarly to other SoC
+  blocks.  External devices are represented as child nodes of their respective
+  bus controller nodes, e.g. I2C.
+
+  Data interfaces on all video devices are described by their child 'port' nodes.
+  Configuration of a port depends on other devices participating in the data
+  transfer and is described by 'endpoint' subnodes.
+
+  device {
+      ...
+      ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+              ...
+              endpoint@0 { ... };
+              endpoint@1 { ... };
+          };
+          port@1 { ... };
+      };
+  };
+
+  If a port can be configured to work with more than one remote device on the same
+  bus, an 'endpoint' child node must be provided for each of them.  If more than
+  one port is present in a device node or there is more than one endpoint at a
+  port, or port node needs to be associated with a selected hardware interface,
+  a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
+  used.
+
+  All 'port' nodes can be grouped under optional 'ports' node, which allows to
+  specify #address-cells, #size-cells properties independently for the 'port'
+  and 'endpoint' nodes and any child device nodes a device might have.
+
+  Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
+  phandles.  An endpoint subnode of a device contains all properties needed for
+  configuration of this device for data exchange with other device.  In most
+  cases properties at the peer 'endpoint' nodes will be identical, however they
+  might need to be different when there is any signal modifications on the bus
+  between two devices, e.g. there are logic signal inverters on the lines.
+
+  It is allowed for multiple endpoints at a port to be active simultaneously,
+  where supported by a device.  For example, in case where a data interface of
+  a device is partitioned into multiple data busses, e.g. 16-bit input port
+  divided into two separate ITU-R BT.656 8-bit busses.  In such case bus-width
+  and data-shift properties can be used to assign physical data lines to each
+  endpoint node (logical bus).
+
+  Documenting bindings for devices
+  --------------------------------
+
+  All required and optional bindings the device supports shall be explicitly
+  documented in device DT binding documentation. This also includes port and
+  endpoint nodes for the device, including unit-addresses and reg properties
+  where relevant.
+
+allOf:
+  - $ref: /schemas/graph.yaml#/$defs/endpoint-base
+
+properties:
+  slave-mode:
+    type: boolean
+    description:
+      Indicates that the link is run in slave mode. The default when this
+      property is not specified is master mode. In the slave mode horizontal and
+      vertical synchronization signals are provided to the slave device (data
+      source) by the master device (data sink). In the master mode the data
+      source device is also the source of the synchronization signals.
+
+  bus-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1 # MIPI CSI-2 C-PHY
+      - 2 # MIPI CSI1
+      - 3 # CCP2
+      - 4 # MIPI CSI-2 D-PHY
+      - 5 # Parallel
+      - 6 # BT.656
+      - 7 # DPI
+    description:
+      Data bus type.
+
+  bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 64
+    description:
+      Number of data lines actively used, valid for the parallel busses.
+
+  data-shift:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 64
+    description:
+      On the parallel data busses, if bus-width is used to specify the number of
+      data lines, data-shift can be used to specify which data lines are used,
+      e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used.
+
+  hsync-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+
+  vsync-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. Note,
+      that if HSYNC and VSYNC polarities are not specified, embedded
+      synchronization may be required, where supported.
+
+  data-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Similar to HSYNC and VSYNC, specifies data line polarity.
+
+  data-enable-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Similar to HSYNC and VSYNC, specifies the data enable signal polarity.
+
+  field-even-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Field signal level during the even field data transmission.
+
+  pclk-sample:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Sample data on rising (1) or falling (0) edge of the pixel clock signal.
+
+  sync-on-green-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively.
+
+  data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    items:
+      # Assume up to 9 physical lane indices
+      maximum: 8
+    description:
+      An array of physical data lane indexes. Position of an entry determines
+      the logical lane number, while the value of an entry indicates physical
+      lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1 2>;",
+      assuming the clock lane is on hardware lane 0. If the hardware does not
+      support lane reordering, monotonically incremented values shall be used
+      from 0 or 1 onwards, depending on whether or not there is also a clock
+      lane. This property is valid for serial busses only (e.g. MIPI CSI-2).
+
+  clock-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    # Assume up to 9 physical lane indices
+    maximum: 8
+    description:
+      Physical clock lane index. Position of an entry determines the logical
+      lane number, while the value of an entry indicates physical lane, e.g. for
+      a MIPI CSI-2 bus we could have "clock-lanes = <0>;", which places the
+      clock lane on hardware lane 0. This property is valid for serial busses
+      only (e.g. MIPI CSI-2).
+
+  clock-noncontinuous:
+    type: boolean
+    description:
+      Allow MIPI CSI-2 non-continuous clock mode.
+
+  link-frequencies:
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    description:
+      Allowed data bus frequencies. For MIPI CSI-2, for instance, this is the
+      actual frequency of the bus, not bits per clock per lane value. An array
+      of 64-bit unsigned integers.
+
+  lane-polarities:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 9
+    items:
+      enum: [ 0, 1 ]
+    description:
+      An array of polarities of the lanes starting from the clock lane and
+      followed by the data lanes in the same order as in data-lanes. Valid
+      values are 0 (normal) and 1 (inverted). The length of the array should be
+      the combined length of data-lanes and clock-lanes properties. If the
+      lane-polarities property is omitted, the value must be interpreted as 0
+      (normal). This property is valid for serial busses only.
+
+  strobe:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Whether the clock signal is used as clock (0) or strobe (1). Used with
+      CCP2, for instance.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/media/video-mux.txt b/Documentation/devicetree/bindings/media/video-mux.txt
deleted file mode 100644
index 63b9dc913e45..000000000000
--- a/Documentation/devicetree/bindings/media/video-mux.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Video Multiplexer
-=================
-
-Video multiplexers allow to select between multiple input ports. Video received
-on the active input port is passed through to the output port. Muxes described
-by this binding are controlled by a multiplexer controller that is described by
-the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt
-
-Required properties:
-- compatible : should be "video-mux"
-- mux-controls : mux controller node to use for operating the mux
-- #address-cells: should be <1>
-- #size-cells: should be <0>
-- port@*: at least three port nodes containing endpoints connecting to the
-  source and sink devices according to of_graph bindings. The last port is
-  the output port, all others are inputs.
-
-Optionally, #address-cells, #size-cells, and port nodes can be grouped under a
-ports node as described in Documentation/devicetree/bindings/graph.txt.
-
-Example:
-
-	mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-	};
-
-	video-mux {
-		compatible = "video-mux";
-		mux-controls = <&mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			mux_in0: endpoint {
-				remote-endpoint = <&video_source0_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			mux_in1: endpoint {
-				remote-endpoint = <&video_source1_out>;
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			mux_out: endpoint {
-				remote-endpoint = <&capture_interface_in>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml
new file mode 100644
index 000000000000..2f28a7dad93f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video-mux.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/video-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Video Multiplexer
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description:
+  Video multiplexers allow to select between multiple input ports. Video
+  received on the active input port is passed through to the output port. Muxes
+  described by this binding are controlled by a multiplexer controller.
+
+properties:
+  compatible:
+    const: video-mux
+
+  mux-controls:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@':
+        $ref: /schemas/graph.yaml#/properties/port
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+
+patternProperties:
+  '^port@':
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      At least three port nodes containing endpoints connecting to the source
+      and sink devices according to of_graph bindings. The last port is the
+      output port, all others are inputs.
+
+required:
+  - compatible
+  - mux-controls
+
+oneOf:
+  - required:
+      - ports
+  - required:
+      - port@0
+      - port@1
+      - port@2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mux: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+    };
+
+    video-mux {
+        compatible = "video-mux";
+        mux-controls = <&mux>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+            reg = <0>;
+
+            mux_in0: endpoint {
+                remote-endpoint = <&video_source0_out>;
+            };
+        };
+
+        port@1 {
+            reg = <1>;
+
+            mux_in1: endpoint {
+                remote-endpoint = <&video_source1_out>;
+            };
+        };
+
+        port@2 {
+            reg = <2>;
+
+            mux_out: endpoint {
+                remote-endpoint = <&capture_interface_in>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/xilinx/video.txt b/Documentation/devicetree/bindings/media/xilinx/video.txt
index 68ac210e688e..d0335ca0cd57 100644
--- a/Documentation/devicetree/bindings/media/xilinx/video.txt
+++ b/Documentation/devicetree/bindings/media/xilinx/video.txt
@@ -32,4 +32,4 @@ The following properties are common to all Xilinx video IP cores.
   defaults to "mono".
 
 
-[UG934] http://www.xilinx.com/support/documentation/ip_documentation/axi_videoip/v1_0/ug934_axi_videoIP.pdf
+[UG934] https://www.xilinx.com/support/documentation/ip_documentation/axi_videoip/v1_0/ug934_axi_videoIP.pdf
diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
new file mode 100644
index 000000000000..7d77823dbb7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/xilinx/xlnx,csi2rxss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx MIPI CSI-2 Receiver Subsystem
+
+maintainers:
+  - Vishal Sagar <vishal.sagar@xilinx.com>
+
+description: |
+  The Xilinx MIPI CSI-2 Receiver Subsystem is used to capture MIPI CSI-2
+  traffic from compliant camera sensors and send the output as AXI4 Stream
+  video data for image processing.
+  The subsystem consists of a MIPI D-PHY in slave mode which captures the
+  data packets. This is passed along the MIPI CSI-2 Rx IP which extracts the
+  packet data. The optional Video Format Bridge (VFB) converts this data to
+  AXI4 Stream video data.
+  For more details, please refer to PG232 Xilinx MIPI CSI-2 Receiver Subsystem.
+  Please note that this bindings includes only the MIPI CSI-2 Rx controller
+  and Video Format Bridge and not D-PHY.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xlnx,mipi-csi2-rx-subsystem-5.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: List of clock specifiers
+    items:
+      - description: AXI Lite clock
+      - description: Video clock
+
+  clock-names:
+    items:
+      - const: lite_aclk
+      - const: video_aclk
+
+  xlnx,csi-pxl-format:
+    description: |
+      This denotes the CSI Data type selected in hw design.
+      Packets other than this data type (except for RAW8 and
+      User defined data types) will be filtered out.
+      Possible values are as below -
+      0x1e - YUV4228B
+      0x1f - YUV42210B
+      0x20 - RGB444
+      0x21 - RGB555
+      0x22 - RGB565
+      0x23 - RGB666
+      0x24 - RGB888
+      0x28 - RAW6
+      0x29 - RAW7
+      0x2a - RAW8
+      0x2b - RAW10
+      0x2c - RAW12
+      0x2d - RAW14
+      0x2e - RAW16
+      0x2f - RAW20
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - minimum: 0x1e
+        maximum: 0x24
+      - minimum: 0x28
+        maximum: 0x2f
+
+  xlnx,vfb:
+    type: boolean
+    description: Present when Video Format Bridge is enabled in IP configuration
+
+  xlnx,en-csi-v2-0:
+    type: boolean
+    description: Present if CSI v2 is enabled in IP configuration.
+
+  xlnx,en-vcx:
+    type: boolean
+    description: |
+      When present, there are maximum 16 virtual channels, else only 4.
+
+  xlnx,en-active-lanes:
+    type: boolean
+    description: |
+      Present if the number of active lanes can be re-configured at
+      runtime in the Protocol Configuration Register. Otherwise all lanes,
+      as set in IP configuration, are always active.
+
+  video-reset-gpios:
+    description: Optional specifier for a GPIO that asserts video_aresetn.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Input / sink port node, single endpoint describing the
+          CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: |
+                  This is required only in the sink port 0 endpoint which
+                  connects to MIPI CSI-2 source like sensor.
+                  The possible values are -
+                  1       - For 1 lane enabled in IP.
+                  1 2     - For 2 lanes enabled in IP.
+                  1 2 3   - For 3 lanes enabled in IP.
+                  1 2 3 4 - For 4 lanes enabled in IP.
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+            required:
+              - data-lanes
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output / source port node, endpoint describing modules
+          connected the CSI-2 receiver.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+allOf:
+  - if:
+      required:
+        - xlnx,vfb
+    then:
+      required:
+        - xlnx,csi-pxl-format
+    else:
+      properties:
+        xlnx,csi-pxl-format: false
+
+  - if:
+      not:
+        required:
+          - xlnx,en-csi-v2-0
+    then:
+      properties:
+        xlnx,en-vcx: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    xcsi2rxss_1: csi2rx@a0020000 {
+        compatible = "xlnx,mipi-csi2-rx-subsystem-5.0";
+        reg = <0xa0020000 0x10000>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 95 4>;
+        xlnx,csi-pxl-format = <0x2a>;
+        xlnx,vfb;
+        xlnx,en-active-lanes;
+        xlnx,en-csi-v2-0;
+        xlnx,en-vcx;
+        clock-names = "lite_aclk", "video_aclk";
+        clocks = <&misc_clk_0>, <&misc_clk_1>;
+        video-reset-gpios = <&gpio 86 GPIO_ACTIVE_LOW>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                /* Sink port */
+                reg = <0>;
+                csiss_in: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    /* MIPI CSI-2 Camera handle */
+                    remote-endpoint = <&camera_out>;
+                };
+            };
+            port@1 {
+                /* Source port */
+                reg = <1>;
+                csiss_out: endpoint {
+                    remote-endpoint = <&vproc_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/zx-irdec.txt b/Documentation/devicetree/bindings/media/zx-irdec.txt
deleted file mode 100644
index 295b9fab593e..000000000000
--- a/Documentation/devicetree/bindings/media/zx-irdec.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-IR Decoder (IRDEC) on ZTE ZX family SoCs
-
-Required properties:
- - compatible: Should be "zte,zx296718-irdec".
- - reg: Physical base address and length of IRDEC registers.
- - interrupts: Interrupt number of IRDEC.
-
-Exmaples:
-
-	irdec: ir-decoder@111000 {
-		compatible = "zte,zx296718-irdec";
-		reg = <0x111000 0x1000>;
-		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
new file mode 100644
index 000000000000..01c9acf9275d
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/arm,pl353-smc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PL353 Static Memory Controller (SMC) device-tree bindings
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
+
+description:
+  The PL353 Static Memory Controller is a bus where you can connect two kinds
+  of memory interfaces, which are NAND and memory mapped interfaces (such as
+  SRAM or NOR).
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl353-smc-r2p1
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: arm,pl353-smc-r2p1
+      - const: arm,primecell
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  reg:
+    items:
+      - description:
+          Configuration registers for the host and sub-controllers.
+          The three chip select regions are defined in 'ranges'.
+
+  clocks:
+    items:
+      - description: clock for the memory device bus
+      - description: main clock of the SMC
+
+  clock-names:
+    items:
+      - const: memclk
+      - const: apb_pclk
+
+  ranges:
+    minItems: 1
+    description: |
+      Memory bus areas for interacting with the devices. Reflects
+      the memory layout with four integer values following:
+      <cs-number> 0 <offset> <size>
+    items:
+      - description: NAND bank 0
+      - description: NOR/SRAM bank 0
+      - description: NOR/SRAM bank 1
+
+  interrupts: true
+
+patternProperties:
+  "@[0-3],[a-f0-9]+$":
+    type: object
+    description: |
+      The child device node represents the controller connected to the SMC
+      bus. The controller can be a NAND controller or a pair of any memory
+      mapped controllers such as NOR and SRAM controllers.
+
+    properties:
+      compatible:
+        description:
+          Compatible of memory controller.
+
+      reg:
+        items:
+          - items:
+              - description: |
+                  Chip-select ID, as in the parent range property.
+                minimum: 0
+                maximum: 2
+              - description: |
+                  Offset of the memory region requested by the device.
+              - description: |
+                  Length of the memory region requested by the device.
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    smcc: memory-controller@e000e000 {
+      compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+      reg = <0xe000e000 0x0001000>;
+      clock-names = "memclk", "apb_pclk";
+      clocks = <&clkc 11>, <&clkc 44>;
+      ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+                0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+                0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+      #address-cells = <2>;
+      #size-cells = <1>;
+
+      nfc0: nand-controller@0,0 {
+        compatible = "arm,pl353-nand-r2p1";
+        reg = <0 0 0x1000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt b/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
deleted file mode 100644
index c81af75bcd88..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Binding for Qualcomm  Atheros AR7xxx/AR9xxx DDR controller
-
-The DDR controller of the AR7xxx and AR9xxx families provides an interface
-to flush the FIFO between various devices and the DDR. This is mainly used
-by the IRQ controller to flush the FIFO before running the interrupt handler
-of such devices.
-
-Required properties:
-
-- compatible: has to be "qca,<soc-type>-ddr-controller",
-  "qca,[ar7100|ar7240]-ddr-controller" as fallback.
-  On SoC with PCI support "qca,ar7100-ddr-controller" should be used as
-  fallback, otherwise "qca,ar7240-ddr-controller" should be used.
-- reg: Base address and size of the controller's memory area
-- #qca,ddr-wb-channel-cells: Specifies the number of cells needed to encode
-			     the write buffer channel index, should be 1.
-
-Example:
-
-	ddr_ctrl: memory-controller@18000000 {
-		compatible = "qca,ar9132-ddr-controller",
-				"qca,ar7240-ddr-controller";
-		reg = <0x18000000 0x100>;
-
-		#qca,ddr-wb-channel-cells = <1>;
-	};
-
-	...
-
-	interrupt-controller {
-		...
-		qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
-		qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
-					<&ddr_ctrl 0>, <&ddr_ctrl 1>;
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml b/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml
new file mode 100644
index 000000000000..1fca282f64a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/baikal,bt1-l2-ctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 L2-cache Control Block
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  By means of the System Controller Baikal-T1 SoC exposes a few settings to
+  tune the MIPS P5600 CM2 L2 cache performance up. In particular it's possible
+  to change the Tag, Data and Way-select RAM access latencies. Baikal-T1
+  L2-cache controller block is responsible for the tuning. Its DT node is
+  supposed to be a child of the system controller.
+
+properties:
+  compatible:
+    const: baikal,bt1-l2-ctl
+
+  reg:
+    maxItems: 1
+
+  baikal,l2-ws-latency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Cycles of latency for Way-select RAM accesses
+    default: 0
+    minimum: 0
+    maximum: 3
+
+  baikal,l2-tag-latency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Cycles of latency for Tag RAM accesses
+    default: 0
+    minimum: 0
+    maximum: 3
+
+  baikal,l2-data-latency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Cycles of latency for Data RAM accesses
+    default: 1
+    minimum: 0
+    maximum: 3
+
+additionalProperties: false
+
+required:
+  - compatible
+
+examples:
+  - |
+    l2@1f04d028 {
+      compatible = "baikal,bt1-l2-ctl";
+      reg = <0x1f04d028 0x004>;
+
+      baikal,l2-ws-latency = <1>;
+      baikal,l2-tag-latency = <1>;
+      baikal,l2-data-latency = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml
new file mode 100644
index 000000000000..4b072c879b02
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/brcm,brcmstb-memc-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Memory controller (MEMC) for Broadcom STB
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,brcmstb-memc-ddr-rev-b.1.x
+          - brcm,brcmstb-memc-ddr-rev-b.2.0
+          - brcm,brcmstb-memc-ddr-rev-b.2.1
+          - brcm,brcmstb-memc-ddr-rev-b.2.2
+          - brcm,brcmstb-memc-ddr-rev-b.2.3
+          - brcm,brcmstb-memc-ddr-rev-b.2.5
+          - brcm,brcmstb-memc-ddr-rev-b.2.6
+          - brcm,brcmstb-memc-ddr-rev-b.2.7
+          - brcm,brcmstb-memc-ddr-rev-b.2.8
+          - brcm,brcmstb-memc-ddr-rev-b.3.0
+          - brcm,brcmstb-memc-ddr-rev-b.3.1
+          - brcm,brcmstb-memc-ddr-rev-c.1.0
+          - brcm,brcmstb-memc-ddr-rev-c.1.1
+          - brcm,brcmstb-memc-ddr-rev-c.1.2
+          - brcm,brcmstb-memc-ddr-rev-c.1.3
+          - brcm,brcmstb-memc-ddr-rev-c.1.4
+      - const: brcm,brcmstb-memc-ddr
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    description: DDR PHY frequency in Hz
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@9902000 {
+        compatible = "brcm,brcmstb-memc-ddr-rev-c.1.1", "brcm,brcmstb-memc-ddr";
+        reg = <0x9902000 0x600>;
+        clock-frequency = <2133000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt
deleted file mode 100644
index 82d923ef413f..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-DDR PHY Front End (DPFE) for Broadcom STB
-=========================================
-
-DPFE and the DPFE firmware provide an interface for the host CPU to
-communicate with the DCPU, which resides inside the DDR PHY.
-
-There are three memory regions for interacting with the DCPU. These are
-specified in a single reg property.
-
-Required properties:
-  - compatible: must be "brcm,bcm7271-dpfe-cpu", "brcm,bcm7268-dpfe-cpu"
-    or "brcm,dpfe-cpu"
-  - reg: must reference three register ranges
-      - start address and length of the DCPU register space
-      - start address and length of the DCPU data memory space
-      - start address and length of the DCPU instruction memory space
-  - reg-names: must contain "dpfe-cpu", "dpfe-dmem", and "dpfe-imem";
-        they must be in the same order as the register declarations
-
-Example:
-	dpfe_cpu0: dpfe-cpu@f1132000 {
-		compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu";
-		reg =  <0xf1132000 0x180
-			0xf1134000 0x1000
-			0xf1138000 0x4000>;
-		reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem";
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
new file mode 100644
index 000000000000..08cbdcddfead
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/brcm,dpfe-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DDR PHY Front End (DPFE) for Broadcom STB
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Markus Mayer <mmayer@broadcom.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7271-dpfe-cpu
+          - brcm,bcm7268-dpfe-cpu
+      - const: brcm,dpfe-cpu
+
+  reg:
+    items:
+      - description: DCPU register space
+      - description: DCPU data memory space
+      - description: DCPU instruction memory space
+
+  reg-names:
+    items:
+      - const: dpfe-cpu
+      - const: dpfe-dmem
+      - const: dpfe-imem
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    dpfe-cpu@f1132000 {
+        compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu";
+        reg = <0xf1132000 0x180>,
+              <0xf1134000 0x1000>,
+              <0xf1138000 0x4000>;
+        reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem";
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt
deleted file mode 100644
index 049675944b78..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Calxeda DDR memory controller
-
-Properties:
-- compatible : Should be:
-  - "calxeda,hb-ddr-ctrl" for ECX-1000
-  - "calxeda,ecx-2000-ddr-ctrl" for ECX-2000
-- reg : Address and size for DDR controller registers.
-- interrupts : Interrupt for DDR controller.
-
-Example:
-
-	memory-controller@fff00000 {
-		compatible = "calxeda,hb-ddr-ctrl";
-		reg = <0xfff00000 0x1000>;
-		interrupts = <0 91 4>;
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
new file mode 100644
index 000000000000..96d563fd61f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/calxeda-ddr-ctrlr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda DDR memory controller binding
+
+description: |
+  The Calxeda DDR memory controller is initialised and programmed by the
+  firmware, but an OS might want to read its registers for error reporting
+  purposes and to learn about the DRAM topology.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    enum:
+      - calxeda,hb-ddr-ctrl
+      - calxeda,ecx-2000-ddr-ctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@fff00000 {
+        compatible = "calxeda,hb-ddr-ctrl";
+        reg = <0xfff00000 0x1000>;
+        interrupts = <0 91 4>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
new file mode 100644
index 000000000000..f81fb866e319
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/canaan,k210-sram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan K210 SRAM memory controller
+
+description:
+  The Canaan K210 SRAM memory controller is responsible for the system's 8 MiB
+  of SRAM. The controller is initialised by the bootloader, which configures
+  its clocks, before OS bringup.
+
+maintainers:
+  - Conor Dooley <conor@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - canaan,k210-sram
+
+  clocks:
+    minItems: 1
+    items:
+      - description: sram0 clock
+      - description: sram1 clock
+      - description: aisram clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sram0
+      - const: sram1
+      - const: aisram
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    memory-controller {
+        compatible = "canaan,k210-sram";
+        clocks = <&sysclk K210_CLK_SRAM0>,
+                 <&sysclk K210_CLK_SRAM1>,
+                 <&sysclk K210_CLK_AI>;
+        clock-names = "sram0", "sram1", "aisram";
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
new file mode 100644
index 000000000000..1daa66592477
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR2 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: jedec,lpddr2-timings
+
+  max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+
+  min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Minimum DDR clock frequency for the speed-bin, in Hz.
+
+  tCKESR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in pico seconds.
+
+  tDQSCK-max:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DQS output data access time from CK_t/CK_c in pico seconds.
+
+  tDQSCK-max-derated:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DQS output data access time from CK_t/CK_c, temperature de-rated, in pico
+      seconds.
+
+  tFAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Four-bank activate window in pico seconds.
+
+  tRAS-max-ns:
+    description: |
+      Row active time in nano seconds.
+
+  tRAS-min:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row active time in pico seconds.
+
+  tRCD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RAS-to-CAS delay in pico seconds.
+
+  tRPab:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (all banks) in pico seconds.
+
+  tRRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Active bank A to active bank B in pico seconds.
+
+  tRTP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal READ to PRECHARGE command delay in pico seconds.
+
+  tWR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      WRITE recovery time in pico seconds.
+
+  tWTR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal WRITE-to-READ command delay in pico seconds.
+
+  tXP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Exit power-down to next valid command delay in pico seconds.
+
+  tZQCL:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Long calibration time in pico seconds.
+
+  tZQCS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Short calibration time in pico seconds.
+
+  tZQinit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Initialization calibration time in pico seconds.
+
+required:
+  - compatible
+  - min-freq
+  - max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    timings {
+        compatible = "jedec,lpddr2-timings";
+        min-freq = <10000000>;
+        max-freq = <400000000>;
+        tCKESR = <15000>;
+        tDQSCK-max = <5500>;
+        tFAW = <50000>;
+        tRAS-max-ns = <70000>;
+        tRAS-min = <42000>;
+        tRPab = <21000>;
+        tRCD = <18000>;
+        tRRD = <10000>;
+        tRTP = <7500>;
+        tWR = <15000>;
+        tWTR = <7500>;
+        tXP = <7500>;
+        tZQCL = <360000>;
+        tZQCS = <90000>;
+        tZQinit = <1000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
new file mode 100644
index 000000000000..9d78f140609b
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
@@ -0,0 +1,234 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR2 SDRAM compliant to JEDEC JESD209-2
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - elpida,ECB240ABACN
+              - elpida,B8132B2PB-6D-F
+          - enum:
+              - jedec,lpddr2-s4
+      - items:
+          - enum:
+              - jedec,lpddr2-s2
+      - items:
+          - enum:
+              - jedec,lpddr2-nvm
+
+  revision-id1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Revision 1 value of SDRAM chip. Obtained from device datasheet.
+      Property is deprecated, use revision-id instead.
+    deprecated: true
+
+  revision-id2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Revision 2 value of SDRAM chip. Obtained from device datasheet.
+      Property is deprecated, use revision-id instead.
+    deprecated: true
+
+  revision-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Revision IDs read from Mode Register 6 and 7. One byte per uint32 cell (i.e. <MR6 MR7>).
+    minItems: 2
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 255
+
+  density:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Density in megabits of SDRAM chip. Obtained from device datasheet.
+    enum:
+      - 64
+      - 128
+      - 256
+      - 512
+      - 1024
+      - 2048
+      - 4096
+      - 8192
+      - 16384
+      - 32768
+
+  io-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      IO bus width in bits of SDRAM chip. Obtained from device datasheet.
+    enum:
+      - 32
+      - 16
+      - 8
+
+  tRRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Active bank a to active bank b in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tWTR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Internal WRITE-to-READ command delay in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tXP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Exit power-down to next valid command delay in terms of number of clock
+      cycles. Obtained from device datasheet.
+
+  tRTP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Internal READ to PRECHARGE command delay in terms of number of clock
+      cycles. Obtained from device datasheet.
+
+  tCKE-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in terms of number
+      of clock cycles. Obtained from device datasheet.
+
+  tRPab-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Row precharge time (all banks) in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tRCD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      RAS-to-CAS delay in terms of number of clock cycles. Obtained from
+      device datasheet.
+
+  tWR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      WRITE recovery time in terms of number of clock cycles. Obtained from
+      device datasheet.
+
+  tRASmin-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Row active time in terms of number of clock cycles. Obtained from device
+      datasheet.
+
+  tCKESR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in terms of number of clock cycles. Obtained from device
+      datasheet.
+
+  tFAW-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Four-bank activate window in terms of number of clock cycles. Obtained
+      from device datasheet.
+
+patternProperties:
+  "^lpddr2-timings":
+    $ref: jedec,lpddr2-timings.yaml
+    description: |
+      The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
+      "lpddr2-timings" provides AC timing parameters of the device for
+      a given speed-bin. The user may provide the timings for as many
+      speed-bins as is required.
+
+required:
+  - compatible
+  - density
+  - io-width
+
+additionalProperties: false
+
+examples:
+  - |
+    elpida_ECB240ABACN: lpddr2 {
+        compatible = "elpida,ECB240ABACN", "jedec,lpddr2-s4";
+        density = <2048>;
+        io-width = <32>;
+        revision-id = <1 0>;
+
+        tRPab-min-tck = <3>;
+        tRCD-min-tck = <3>;
+        tWR-min-tck = <3>;
+        tRASmin-min-tck = <3>;
+        tRRD-min-tck = <2>;
+        tWTR-min-tck = <2>;
+        tXP-min-tck = <2>;
+        tRTP-min-tck = <2>;
+        tCKE-min-tck = <3>;
+        tCKESR-min-tck = <3>;
+        tFAW-min-tck = <8>;
+
+        timings_elpida_ECB240ABACN_400mhz: lpddr2-timings0 {
+            compatible = "jedec,lpddr2-timings";
+            min-freq = <10000000>;
+            max-freq = <400000000>;
+            tRPab = <21000>;
+            tRCD = <18000>;
+            tWR = <15000>;
+            tRAS-min = <42000>;
+            tRRD = <10000>;
+            tWTR = <7500>;
+            tXP = <7500>;
+            tRTP = <7500>;
+            tCKESR = <15000>;
+            tDQSCK-max = <5500>;
+            tFAW = <50000>;
+            tZQCS = <90000>;
+            tZQCL = <360000>;
+            tZQinit = <1000000>;
+            tRAS-max-ns = <70000>;
+        };
+
+        timings_elpida_ECB240ABACN_200mhz: lpddr2-timings1 {
+            compatible = "jedec,lpddr2-timings";
+            min-freq = <10000000>;
+            max-freq = <200000000>;
+            tRPab = <21000>;
+            tRCD = <18000>;
+            tWR = <15000>;
+            tRAS-min = <42000>;
+            tRRD = <10000>;
+            tWTR = <10000>;
+            tXP = <7500>;
+            tRTP = <7500>;
+            tCKESR = <15000>;
+            tDQSCK-max = <5500>;
+            tFAW = <50000>;
+            tZQCS = <90000>;
+            tZQCL = <360000>;
+            tZQinit = <1000000>;
+            tRAS-max-ns = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
new file mode 100644
index 000000000000..5c6512c1e1e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: jedec,lpddr3-timings
+
+  reg:
+    maxItems: 1
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+      Property is deprecated, use max-freq.
+    deprecated: true
+
+  max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+
+  min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Minimum DDR clock frequency for the speed-bin, in Hz.
+
+  tCKE:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in pico seconds.
+
+  tCKESR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in pico seconds.
+
+  tFAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Four-bank activate window in pico seconds.
+
+  tMRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Mode register set command delay in pico seconds.
+
+  tR2R-C2C:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Additional READ-to-READ delay in chip-to-chip cases in pico seconds.
+
+  tRAS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row active time in pico seconds.
+
+  tRC:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      ACTIVATE-to-ACTIVATE command period in pico seconds.
+
+  tRCD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RAS-to-CAS delay in pico seconds.
+
+  tRFC:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Refresh Cycle time in pico seconds.
+
+  tRPab:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (all banks) in pico seconds.
+
+  tRPpb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (single banks) in pico seconds.
+
+  tRRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Active bank A to active bank B in pico seconds.
+
+  tRTP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal READ to PRECHARGE command delay in pico seconds.
+
+  tW2W-C2C:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Additional WRITE-to-WRITE delay in chip-to-chip cases in pico seconds.
+
+  tWR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      WRITE recovery time in pico seconds.
+
+  tWTR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal WRITE-to-READ command delay in pico seconds.
+
+  tXP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Exit power-down to next valid command delay in pico seconds.
+
+  tXSR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      SELF REFRESH exit to next valid command delay in pico seconds.
+
+required:
+  - compatible
+  - min-freq
+  - max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    lpddr3 {
+        timings {
+            compatible = "jedec,lpddr3-timings";
+            max-freq = <800000000>;
+            min-freq = <100000000>;
+            tCKE = <3750>;
+            tCKESR = <3750>;
+            tFAW = <25000>;
+            tMRD = <7000>;
+            tR2R-C2C = <0>;
+            tRAS = <23000>;
+            tRC = <33750>;
+            tRCD = <10000>;
+            tRFC = <65000>;
+            tRPab = <12000>;
+            tRPpb = <12000>;
+            tRRD = <6000>;
+            tRTP = <3750>;
+            tW2W-C2C = <0>;
+            tWR = <7500>;
+            tWTR = <3750>;
+            tXP = <3750>;
+            tXSR = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
new file mode 100644
index 000000000000..48908a19473c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -0,0 +1,263 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM compliant to JEDEC JESD209-3
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - samsung,K3QF2F20DB
+      - const: jedec,lpddr3
+
+  '#address-cells':
+    const: 1
+    deprecated: true
+
+  density:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Density in megabits of SDRAM chip.
+    enum:
+      - 4096
+      - 8192
+      - 16384
+      - 32768
+
+  io-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      IO bus width in bits of SDRAM chip.
+    enum:
+      - 32
+      - 16
+
+  manufacturer-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Manufacturer ID value read from Mode Register 5.  The property is
+      deprecated, manufacturer should be derived from the compatible.
+    deprecated: true
+
+  revision-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      maximum: 255
+    description: |
+      Revision value of SDRAM chip read from Mode Registers 6 and 7.
+
+  '#size-cells':
+    const: 0
+    deprecated: true
+
+  tCKE-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in terms of number
+      of clock cycles.
+
+  tCKESR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in terms of number of clock cycles.
+
+  tDQSCK-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      DQS output data access time from CK_t/CK_c in terms of number of clock
+      cycles.
+
+  tFAW-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      Four-bank activate window in terms of number of clock cycles.
+
+  tMRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Mode register set command delay in terms of number of clock cycles.
+
+  tR2R-C2C-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Additional READ-to-READ delay in chip-to-chip cases in terms of number
+      of clock cycles.
+
+  tRAS-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      Row active time in terms of number of clock cycles.
+
+  tRC-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      ACTIVATE-to-ACTIVATE command period in terms of number of clock cycles.
+
+  tRCD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      RAS-to-CAS delay in terms of number of clock cycles.
+
+  tRFC-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Refresh Cycle time in terms of number of clock cycles.
+
+  tRL-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+     READ data latency in terms of number of clock cycles.
+
+  tRPab-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Row precharge time (all banks) in terms of number of clock cycles.
+
+  tRPpb-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Row precharge time (single banks) in terms of number of clock cycles.
+
+  tRRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Active bank A to active bank B in terms of number of clock cycles.
+
+  tRTP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Internal READ to PRECHARGE command delay in terms of number of clock
+      cycles.
+
+  tW2W-C2C-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Additional WRITE-to-WRITE delay in chip-to-chip cases in terms of number
+      of clock cycles.
+
+  tWL-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      WRITE data latency in terms of number of clock cycles.
+
+  tWR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      WRITE recovery time in terms of number of clock cycles.
+
+  tWTR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Internal WRITE-to-READ command delay in terms of number of clock cycles.
+
+  tXP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Exit power-down to next valid command delay in terms of number of clock
+      cycles.
+
+  tXSR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 1023
+    description: |
+      SELF REFRESH exit to next valid command delay in terms of number of clock
+      cycles.
+
+patternProperties:
+  "^timings((-[0-9])+|(@[0-9a-f]+))?$":
+    $ref: jedec,lpddr3-timings.yaml
+    description: |
+      The lpddr3 node may have one or more child nodes with timings.
+      Each timing node provides AC timing parameters of the device for a given
+      speed-bin. The user may provide the timings for as many speed-bins as is
+      required.
+
+required:
+  - compatible
+  - density
+  - io-width
+
+additionalProperties: false
+
+examples:
+  - |
+    lpddr3 {
+        compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
+        density = <16384>;
+        io-width = <32>;
+
+        tCKE-min-tck = <2>;
+        tCKESR-min-tck = <2>;
+        tDQSCK-min-tck = <5>;
+        tFAW-min-tck = <5>;
+        tMRD-min-tck = <5>;
+        tR2R-C2C-min-tck = <0>;
+        tRAS-min-tck = <5>;
+        tRC-min-tck = <6>;
+        tRCD-min-tck = <3>;
+        tRFC-min-tck = <17>;
+        tRL-min-tck = <14>;
+        tRPab-min-tck = <2>;
+        tRPpb-min-tck = <2>;
+        tRRD-min-tck = <2>;
+        tRTP-min-tck = <2>;
+        tW2W-C2C-min-tck = <0>;
+        tWL-min-tck = <8>;
+        tWR-min-tck = <7>;
+        tWTR-min-tck = <2>;
+        tXP-min-tck = <2>;
+        tXSR-min-tck = <12>;
+
+        timings {
+            compatible = "jedec,lpddr3-timings";
+            max-freq = <800000000>;
+            min-freq = <100000000>;
+            tCKE = <3750>;
+            tCKESR = <3750>;
+            tFAW = <25000>;
+            tMRD = <7000>;
+            tR2R-C2C = <0>;
+            tRAS = <23000>;
+            tRC = <33750>;
+            tRCD = <10000>;
+            tRFC = <65000>;
+            tRPab = <12000>;
+            tRPpb = <12000>;
+            tRRD = <6000>;
+            tRTP = <3750>;
+            tW2W-C2C = <0>;
+            tWR = <7500>;
+            tWTR = <3750>;
+            tXP = <3750>;
+            tXSR = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
index cdfe3f7f0ea9..c6e44f47ce7c 100644
--- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
@@ -28,6 +28,8 @@ properties:
     const: 1
 
   ranges:
+    minItems: 1
+    maxItems: 4
     description: |
       Reflects the memory layout with four integer values per bank. Format:
       <bank-number> 0 <parent address of bank> <size>
@@ -51,9 +53,7 @@ patternProperties:
         maxItems: 1
 
       reg-io-width:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [1, 2]
+        enum: [1, 2]
         description:
           Data width in bytes (1 or 2). If omitted, default of 1 is used.
 
@@ -64,11 +64,10 @@ patternProperties:
         type: boolean
 
       samsung,srom-timing:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              minItems: 6
-              maxItems: 6
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minItems: 6
+          maxItems: 6
         description: |
           Array of 6 integers, specifying bank timings in the following order:
           Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt b/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
deleted file mode 100644
index 02e4a1f862f1..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-* Exynos5422 frequency and voltage scaling for Dynamic Memory Controller device
-
-The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the DRAM
-memory chips are connected. The driver is to monitor the controller in runtime
-and switch frequency and voltage. To monitor the usage of the controller in
-runtime, the driver uses the PPMU (Platform Performance Monitoring Unit), which
-is able to measure the current load of the memory.
-When 'userspace' governor is used for the driver, an application is able to
-switch the DMC and memory frequency.
-
-Required properties for DMC device for Exynos5422:
-- compatible: Should be "samsung,exynos5422-dmc".
-- clocks : list of clock specifiers, must contain an entry for each
-  required entry in clock-names for CLK_FOUT_SPLL, CLK_MOUT_SCLK_SPLL,
-  CLK_FF_DOUT_SPLL2, CLK_FOUT_BPLL, CLK_MOUT_BPLL, CLK_SCLK_BPLL,
-  CLK_MOUT_MX_MSPLL_CCORE, CLK_MOUT_MX_MSPLL_CCORE_PHY, CLK_MOUT_MCLK_CDREX,
-- clock-names : should include "fout_spll", "mout_sclk_spll", "ff_dout_spll2",
-  "fout_bpll", "mout_bpll", "sclk_bpll", "mout_mx_mspll_ccore",
-  "mout_mclk_cdrex"  entries
-- devfreq-events : phandles for PPMU devices connected to this DMC.
-- vdd-supply : phandle for voltage regulator which is connected.
-- reg : registers of two CDREX controllers.
-- operating-points-v2 : phandle for OPPs described in v2 definition.
-- device-handle : phandle of the connected DRAM memory device. For more
-	information please refer to documentation file:
-	Documentation/devicetree/bindings/ddr/lpddr3.txt
-- devfreq-events : phandles of the PPMU events used by the controller.
-- samsung,syscon-clk : phandle of the clock register set used by the controller,
-	these registers are used for enabling a 'pause' feature and are not
-	exposed by clock framework but they must be used in a safe way.
-	The register offsets are in the driver code and specyfic for this SoC
-	type.
-
-Optional properties for DMC device for Exynos5422:
-- interrupt-parent : The parent interrupt controller.
-- interrupts : Contains the IRQ line numbers for the DMC internal performance
-  event counters in DREX0 and DREX1 channels. Align with specification of the
-  interrupt line(s) in the interrupt-parent controller.
-- interrupt-names : IRQ names "drex_0" and "drex_1", the order should be the
-  same as in the 'interrupts' list above.
-
-Example:
-
-	ppmu_dmc0_0: ppmu@10d00000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x10d00000 0x2000>;
-		clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
-		clock-names = "ppmu";
-		events {
-			ppmu_event_dmc0_0: ppmu-event3-dmc0_0 {
-				event-name = "ppmu-event3-dmc0_0";
-			};
-		};
-	};
-
-	dmc: memory-controller@10c20000 {
-		compatible = "samsung,exynos5422-dmc";
-		reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
-		clocks = <&clock CLK_FOUT_SPLL>,
-			 <&clock CLK_MOUT_SCLK_SPLL>,
-			 <&clock CLK_FF_DOUT_SPLL2>,
-			 <&clock CLK_FOUT_BPLL>,
-			 <&clock CLK_MOUT_BPLL>,
-			 <&clock CLK_SCLK_BPLL>,
-			 <&clock CLK_MOUT_MX_MSPLL_CCORE>,
-			 <&clock CLK_MOUT_MCLK_CDREX>;
-		clock-names = "fout_spll",
-			      "mout_sclk_spll",
-			      "ff_dout_spll2",
-			      "fout_bpll",
-			      "mout_bpll",
-			      "sclk_bpll",
-			      "mout_mx_mspll_ccore",
-			      "mout_mclk_cdrex";
-		operating-points-v2 = <&dmc_opp_table>;
-		devfreq-events = <&ppmu_event3_dmc0_0>,	<&ppmu_event3_dmc0_1>,
-				 <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
-		device-handle = <&samsung_K3QF2F20DB>;
-		vdd-supply = <&buck1_reg>;
-		samsung,syscon-clk = <&clock>;
-		interrupt-parent = <&combiner>;
-		interrupts = <16 0>, <16 1>;
-		interrupt-names = "drex_0", "drex_1";
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt
deleted file mode 100644
index dde6d837083a..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Freescale DDR memory controller
-
-Properties:
-
-- compatible	: Should include "fsl,chip-memory-controller" where
-		  chip is the processor (bsc9132, mpc8572 etc.), or
-		  "fsl,qoriq-memory-controller".
-- reg		: Address and size of DDR controller registers
-- interrupts	: Error interrupt of DDR controller
-- little-endian	: Specifies little-endian access to registers
-		  If omitted, big-endian will be used.
-
-Example 1:
-
-	memory-controller@2000 {
-		compatible = "fsl,bsc9132-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <16 2 1 8>;
-	};
-
-
-Example 2:
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml
new file mode 100644
index 000000000000..84f778a99546
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale DDR memory controller
+
+maintainers:
+  - Borislav Petkov <bp@alien8.de>
+  - York Sun <york.sun@nxp.com>
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,qoriq-memory-controller-v4.4
+              - fsl,qoriq-memory-controller-v4.5
+              - fsl,qoriq-memory-controller-v4.7
+              - fsl,qoriq-memory-controller-v5.0
+          - const: fsl,qoriq-memory-controller
+      - enum:
+          - fsl,bsc9132-memory-controller
+          - fsl,mpc8536-memory-controller
+          - fsl,mpc8540-memory-controller
+          - fsl,mpc8541-memory-controller
+          - fsl,mpc8544-memory-controller
+          - fsl,mpc8548-memory-controller
+          - fsl,mpc8555-memory-controller
+          - fsl,mpc8560-memory-controller
+          - fsl,mpc8568-memory-controller
+          - fsl,mpc8569-memory-controller
+          - fsl,mpc8572-memory-controller
+          - fsl,mpc8349-memory-controller
+          - fsl,p1020-memory-controller
+          - fsl,p1021-memory-controller
+          - fsl,p2020-memory-controller
+          - fsl,qoriq-memory-controller
+
+  interrupts:
+    maxItems: 1
+
+  little-endian:
+    description:
+      Specifies little-endian access to registers. If omitted, big-endian will
+      be used.
+    type: boolean
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@2000 {
+        compatible = "fsl,bsc9132-memory-controller";
+        reg = <0x2000 0x1000>;
+        interrupts = <16 2 1 8>;
+    };
+
+  - |
+    memory-controller@8000 {
+        compatible = "fsl,qoriq-memory-controller-v4.7",
+                     "fsl,qoriq-memory-controller";
+        reg = <0x8000 0x1000>;
+        interrupts = <16 2 1 23>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml
new file mode 100644
index 000000000000..3be1db30bf41
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSL/NXP Integrated Flash Controller
+
+maintainers:
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  NXP's integrated flash controller (IFC) is an advanced version of the
+  enhanced local bus controller which includes similar programming and signal
+  interfaces with an extended feature set. The IFC provides access to multiple
+  external memory types, such as NAND flash (SLC and MLC), NOR flash, EPROM,
+  SRAM and other memories where address and data are shared on a bus.
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    const: fsl,ifc
+
+  "#address-cells":
+    enum: [2, 3]
+    description: |
+      Should be either two or three.  The first cell is the chipselect
+      number, and the remaining cells are the offset into the chipselect.
+
+  "#size-cells":
+    enum: [1, 2]
+    description: |
+      Either one or two, depending on how large each chipselect can be.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      IFC may have one or two interrupts.  If two interrupt specifiers are
+      present, the first is the "common" interrupt (CM_EVTER_STAT), and the
+      second is the NAND interrupt (NAND_EVTER_STAT).  If there is only one,
+      that interrupt reports both types of event.
+
+  little-endian:
+    type: boolean
+    description: |
+      If this property is absent, the big-endian mode will be in use as default
+      for registers.
+
+  ranges:
+    description: |
+      Each range corresponds to a single chipselect, and covers the entire
+      access window as configured.
+
+patternProperties:
+  "^.*@[a-f0-9]+(,[a-f0-9]+)+$":
+    type: object
+    description: |
+      Child device nodes describe the devices connected to IFC such as NOR (e.g.
+      cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
+      like FPGAs, CPLDs, etc.
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        memory-controller@ffe1e000 {
+            compatible = "fsl,ifc";
+            #address-cells = <2>;
+            #size-cells = <1>;
+            reg = <0x0 0xffe1e000 0 0x2000>;
+            interrupts = <16 2 19 2>;
+            little-endian;
+
+            /* NOR, NAND Flashes and CPLD on board */
+            ranges = <0x0 0x0 0x0 0xee000000 0x02000000>,
+                     <0x1 0x0 0x0 0xffa00000 0x00010000>,
+                     <0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+            flash@0,0 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "cfi-flash";
+                reg = <0x0 0x0 0x2000000>;
+                bank-width = <2>;
+                device-width = <1>;
+
+                partition@0 {
+                    /* 32MB for user data */
+                    reg = <0x0 0x02000000>;
+                    label = "NOR Data";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
deleted file mode 100644
index 89427b018ba7..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Integrated Flash Controller
-
-Properties:
-- name : Should be ifc
-- compatible : should contain "fsl,ifc". The version of the integrated
-               flash controller can be found in the IFC_REV register at
-               offset zero.
-
-- #address-cells : Should be either two or three.  The first cell is the
-                   chipselect number, and the remaining cells are the
-                   offset into the chipselect.
-- #size-cells : Either one or two, depending on how large each chipselect
-                can be.
-- reg : Offset and length of the register set for the device
-- interrupts: IFC may have one or two interrupts.  If two interrupt
-              specifiers are present, the first is the "common"
-              interrupt (CM_EVTER_STAT), and the second is the NAND
-              interrupt (NAND_EVTER_STAT).  If there is only one,
-              that interrupt reports both types of event.
-
-- little-endian : If this property is absent, the big-endian mode will
-                  be in use as default for registers.
-
-- ranges : Each range corresponds to a single chipselect, and covers
-           the entire access window as configured.
-
-Child device nodes describe the devices connected to IFC such as NOR (e.g.
-cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
-like FPGAs, CPLDs, etc.
-
-Example:
-
-	ifc@ffe1e000 {
-		compatible = "fsl,ifc", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x0 0xffe1e000 0 0x2000>;
-		interrupts = <16 2 19 2>;
-		little-endian;
-
-		/* NOR, NAND Flashes and CPLD on board */
-		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
-			  0x1 0x0 0x0 0xffa00000 0x00010000
-			  0x3 0x0 0x0 0xffb00000 0x00020000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x2000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				/* 32MB for user data */
-				reg = <0x0 0x02000000>;
-				label = "NOR Data";
-			};
-		};
-
-		flash@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,ifc-nand";
-			reg = <0x1 0x0 0x10000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND U-Boot Image";
-				read-only;
-			};
-		};
-
-		cpld@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1010rdb-cpld";
-			reg = <0x3 0x0 0x000001f>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
index c9e6c22cb5be..519b123116dc 100644
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: i.MX8M DDR Controller
 
 maintainers:
-  - Leonard Crestez <leonard.crestez@nxp.com>
+  - Peng Fan <peng.fan@nxp.com>
 
 description:
   The DDRC block is integrated in i.MX8M for interfacing with DDR based
@@ -25,9 +25,9 @@ properties:
   compatible:
     items:
       - enum:
-        - fsl,imx8mn-ddrc
-        - fsl,imx8mm-ddrc
-        - fsl,imx8mq-ddrc
+          - fsl,imx8mn-ddrc
+          - fsl,imx8mm-ddrc
+          - fsl,imx8mq-ddrc
       - const: fsl,imx8m-ddrc
 
   reg:
@@ -47,7 +47,8 @@ properties:
       - const: apb
 
   operating-points-v2: true
-  opp-table: true
+  opp-table:
+    type: object
 
 required:
   - reg
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt
deleted file mode 100644
index bcc36c5b543c..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Freescale Multi Mode DDR controller (MMDC)
-
-Required properties :
-- compatible : should be one of following:
-	for i.MX6Q/i.MX6DL:
-	- "fsl,imx6q-mmdc";
-	for i.MX6QP:
-	- "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
-	for i.MX6SL:
-	- "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
-	for i.MX6SLL:
-	- "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
-	for i.MX6SX:
-	- "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
-	for i.MX6UL/i.MX6ULL/i.MX6ULZ:
-	- "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
-	for i.MX7ULP:
-	- "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc";
-- reg : address and size of MMDC DDR controller registers
-
-Optional properties :
-- clocks : the clock provided by the SoC to access the MMDC registers
-
-Example :
-	mmdc0: memory-controller@21b0000 { /* MMDC0 */
-		compatible = "fsl,imx6q-mmdc";
-		reg = <0x021b0000 0x4000>;
-		clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
-	};
-
-	mmdc1: memory-controller@21b4000 { /* MMDC1 */
-		compatible = "fsl,imx6q-mmdc";
-		reg = <0x021b4000 0x4000>;
-		status = "disabled";
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
new file mode 100644
index 000000000000..71547eee9919
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/mmdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Multi Mode DDR controller (MMDC)
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx6q-mmdc
+      - items:
+          - enum:
+              - fsl,imx6qp-mmdc
+              - fsl,imx6sl-mmdc
+              - fsl,imx6sll-mmdc
+              - fsl,imx6sx-mmdc
+              - fsl,imx6ul-mmdc
+              - fsl,imx7ulp-mmdc
+          - const: fsl,imx6q-mmdc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    memory-controller@21b0000 {
+        compatible = "fsl,imx6q-mmdc";
+        reg = <0x021b0000 0x4000>;
+        clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
+    };
+
+    memory-controller@21b4000 {
+        compatible = "fsl,imx6q-mmdc";
+        reg = <0x021b4000 0x4000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt b/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt
deleted file mode 100644
index 59b8dcc118ee..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-* Ingenic JZ4780 NAND/external memory controller (NEMC)
-
-This file documents the device tree bindings for the NEMC external memory
-controller in Ingenic JZ4780
-
-Required properties:
-- compatible: Should be set to one of:
-    "ingenic,jz4740-nemc" (JZ4740)
-    "ingenic,jz4780-nemc" (JZ4780)
-- reg: Should specify the NEMC controller registers location and length.
-- clocks: Clock for the NEMC controller.
-- #address-cells: Must be set to 2.
-- #size-cells: Must be set to 1.
-- ranges: A set of ranges for each bank describing the physical memory layout.
-  Each should specify the following 4 integer values:
-
-    <cs number> 0 <physical address of mapping> <size of mapping>
-
-Each child of the NEMC node describes a device connected to the NEMC.
-
-Required child node properties:
-- reg: Should contain at least one register specifier, given in the following
-  format:
-
-    <cs number> <offset> <size>
-
-  Multiple registers can be specified across multiple banks. This is needed,
-  for example, for packaged NAND devices with multiple dies. Such devices
-  should be grouped into a single node.
-
-Optional child node properties:
-- ingenic,nemc-bus-width: Specifies the bus width in bits. Defaults to 8 bits.
-- ingenic,nemc-tAS: Address setup time in nanoseconds.
-- ingenic,nemc-tAH: Address hold time in nanoseconds.
-- ingenic,nemc-tBP: Burst pitch time in nanoseconds.
-- ingenic,nemc-tAW: Access wait time in nanoseconds.
-- ingenic,nemc-tSTRV: Static memory recovery time in nanoseconds.
-
-If a child node references multiple banks in its "reg" property, the same value
-for all optional parameters will be configured for all banks. If any optional
-parameters are omitted, they will be left unchanged from whatever they are
-configured to when the NEMC device is probed (which may be the reset value as
-given in the hardware reference manual, or a value configured by the boot
-loader).
-
-Example (NEMC node with a NAND child device attached at CS1):
-
-nemc: nemc@13410000 {
-	compatible = "ingenic,jz4780-nemc";
-	reg = <0x13410000 0x10000>;
-
-	#address-cells = <2>;
-	#size-cells = <1>;
-
-	ranges = <1 0 0x1b000000 0x1000000
-		  2 0 0x1a000000 0x1000000
-		  3 0 0x19000000 0x1000000
-		  4 0 0x18000000 0x1000000
-		  5 0 0x17000000 0x1000000
-		  6 0 0x16000000 0x1000000>;
-
-	clocks = <&cgu JZ4780_CLK_NEMC>;
-
-	nand: nand@1 {
-		compatible = "ingenic,jz4780-nand";
-		reg = <1 0 0x1000000>;
-
-		ingenic,nemc-tAS = <10>;
-		ingenic,nemc-tAH = <5>;
-		ingenic,nemc-tBP = <10>;
-		ingenic,nemc-tAW = <15>;
-		ingenic,nemc-tSTRV = <100>;
-
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml
new file mode 100644
index 000000000000..b8ed52a44d57
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc-peripherals.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs NAND / External Memory Controller (NEMC) devicetree bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  reg:
+    minItems: 1
+    maxItems: 255
+
+  ingenic,nemc-bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+    description: Specifies the bus width in bits.
+
+  ingenic,nemc-tAS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address setup time in nanoseconds.
+
+  ingenic,nemc-tAH:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address hold time in nanoseconds.
+
+  ingenic,nemc-tBP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Burst pitch time in nanoseconds.
+
+  ingenic,nemc-tAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address wait time in nanoseconds.
+
+  ingenic,nemc-tSTRV:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Static memory recovery time in nanoseconds.
+
+required:
+  - reg
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
new file mode 100644
index 000000000000..dd13a5106d6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs NAND / External Memory Controller (NEMC) devicetree bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-nemc
+          - ingenic,jz4780-nemc
+      - items:
+          - const: ingenic,jz4725b-nemc
+          - const: ingenic,jz4740-nemc
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+patternProperties:
+  ".*@[0-9]+$":
+    type: object
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    #include <dt-bindings/gpio/gpio.h>
+    nemc: memory-controller@13410000 {
+      compatible = "ingenic,jz4780-nemc";
+      reg = <0x13410000 0x10000>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      ranges = <1 0 0x1b000000 0x1000000>,
+         <2 0 0x1a000000 0x1000000>,
+         <3 0 0x19000000 0x1000000>,
+         <4 0 0x18000000 0x1000000>,
+         <5 0 0x17000000 0x1000000>,
+         <6 0 0x16000000 0x1000000>;
+
+      clocks = <&cgu JZ4780_CLK_NEMC>;
+
+      ethernet@6 {
+        compatible = "davicom,dm9000";
+        davicom,no-eeprom;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&pins_nemc_cs6>;
+
+        reg = <6 0 1>, /* addr */
+              <6 2 1>; /* data */
+
+        ingenic,nemc-tAS = <15>;
+        ingenic,nemc-tAH = <10>;
+        ingenic,nemc-tBP = <20>;
+        ingenic,nemc-tAW = <50>;
+        ingenic,nemc-tSTRV = <100>;
+
+        reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
+        vcc-supply = <&eth0_power>;
+
+        interrupt-parent = <&gpe>;
+        interrupts = <19 4>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml
new file mode 100644
index 000000000000..9249624c4fa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/marvell,mvebu-sdram-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MVEBU SDRAM controller
+
+maintainers:
+  - Jan Luebbe <jlu@pengutronix.de>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: marvell,armada-xp-sdram-controller
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@1400 {
+        compatible = "marvell,armada-xp-sdram-controller";
+        reg = <0x1400 0x500>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml
new file mode 100644
index 000000000000..6ccdaf99c778
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/mediatek,mt7621-memc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT7621 SDRAM controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt7621-memc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@5000 {
+        compatible = "mediatek,mt7621-memc", "syscon";
+        reg = <0x5000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
deleted file mode 100644
index b478ade4da65..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-SMI (Smart Multimedia Interface) Common
-
-The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
-
-Mediatek SMI have two generations of HW architecture, here is the list
-which generation the SoCs use:
-generation 1: mt2701 and mt7623.
-generation 2: mt2712, mt8173 and mt8183.
-
-There's slight differences between the two SMI, for generation 2, the
-register which control the iommu port is at each larb's register base. But
-for generation 1, the register is at smi ao base(smi always on register
-base). Besides that, the smi async clock should be prepared and enabled for
-SMI generation 1 to transform the smi clock into emi clock domain, but that is
-not needed for SMI generation 2.
-
-Required properties:
-- compatible : must be one of :
-	"mediatek,mt2701-smi-common"
-	"mediatek,mt2712-smi-common"
-	"mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
-	"mediatek,mt8173-smi-common"
-	"mediatek,mt8183-smi-common"
-- reg : the register and size of the SMI block.
-- power-domains : a phandle to the power domain of this local arbiter.
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries
-  for generation 2 smi HW as follows:
-  - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
-	    the register.
-  - "smi" : It's the clock for transfer data and command.
-	    They may be the same if both source clocks are the same.
-  - "async" : asynchronous clock, it help transform the smi clock into the emi
-	      clock domain, this clock is only needed by generation 1 smi HW.
-  and these 2 option clocks for generation 2 smi HW:
-  - "gals0": the path0 clock of GALS(Global Async Local Sync).
-  - "gals1": the path1 clock of GALS(Global Async Local Sync).
-  Here is the list which has this GALS: mt8183.
-
-Example:
-	smi_common: smi@14022000 {
-		compatible = "mediatek,mt8173-smi-common";
-		reg = <0 0x14022000 0 0x1000>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		clocks = <&mmsys CLK_MM_SMI_COMMON>,
-			 <&mmsys CLK_MM_SMI_COMMON>;
-		clock-names = "apb", "smi";
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
new file mode 100644
index 000000000000..a8fda30cccbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SMI (Smart Multimedia Interface) Common
+
+maintainers:
+  - Yong Wu <yong.wu@mediatek.com>
+
+description: |
+  The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
+
+  MediaTek SMI have two generations of HW architecture, here is the list
+  which generation the SoCs use:
+  generation 1: mt2701 and mt7623.
+  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8186, mt8188, mt8192 and mt8195.
+
+  There's slight differences between the two SMI, for generation 2, the
+  register which control the iommu port is at each larb's register base. But
+  for generation 1, the register is at smi ao base(smi always on register
+  base). Besides that, the smi async clock should be prepared and enabled for
+  SMI generation 1 to transform the smi clock into emi clock domain, but that is
+  not needed for SMI generation 2.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-smi-common
+          - mediatek,mt2712-smi-common
+          - mediatek,mt6779-smi-common
+          - mediatek,mt6795-smi-common
+          - mediatek,mt8167-smi-common
+          - mediatek,mt8173-smi-common
+          - mediatek,mt8183-smi-common
+          - mediatek,mt8186-smi-common
+          - mediatek,mt8188-smi-common-vdo
+          - mediatek,mt8188-smi-common-vpp
+          - mediatek,mt8192-smi-common
+          - mediatek,mt8195-smi-common-vdo
+          - mediatek,mt8195-smi-common-vpp
+          - mediatek,mt8195-smi-sub-common
+
+      - description: for mt7623
+        items:
+          - const: mediatek,mt7623-smi-common
+          - const: mediatek,mt2701-smi-common
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    description: |
+      apb and smi are mandatory. the async is only for generation 1 smi HW.
+      gals(global async local sync) also is optional, see below.
+    minItems: 2
+    items:
+      - description: apb is Advanced Peripheral Bus clock, It's the clock for
+          setting the register.
+      - description: smi is the clock for transfer data and command.
+      - description: Either asynchronous clock to help transform the smi clock
+          into the emi clock domain on Gen1 h/w, or the path0 clock of gals.
+      - description: gals1 is the path1 clock of gals.
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+
+  mediatek,smi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the smi-common node above. Only for sub-common.
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - clock-names
+
+allOf:
+  - if:  # only for gen1 HW
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-smi-common
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: apb
+            - const: smi
+            - const: async
+
+  - if:  # only for sub common
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8195-smi-sub-common
+    then:
+      required:
+        - mediatek,smi
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: apb
+            - const: smi
+            - const: gals0
+    else:
+      properties:
+        mediatek,smi: false
+
+  - if:  # for gen2 HW that have gals
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt6779-smi-common
+            - mediatek,mt8183-smi-common
+            - mediatek,mt8186-smi-common
+            - mediatek,mt8192-smi-common
+            - mediatek,mt8195-smi-common-vdo
+            - mediatek,mt8195-smi-common-vpp
+
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: apb
+            - const: smi
+            - const: gals0
+            - const: gals1
+
+  - if:  # for gen2 HW that don't have gals
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt2712-smi-common
+            - mediatek,mt6795-smi-common
+            - mediatek,mt8167-smi-common
+            - mediatek,mt8173-smi-common
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: apb
+            - const: smi
+
+additionalProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    smi_common: smi@14022000 {
+            compatible = "mediatek,mt8173-smi-common";
+            reg = <0x14022000 0x1000>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_SMI_COMMON>,
+                     <&mmsys CLK_MM_SMI_COMMON>;
+            clock-names = "apb", "smi";
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
deleted file mode 100644
index 4b369b3e1a69..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-SMI (Smart Multimedia Interface) Local Arbiter
-
-The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
-
-Required properties:
-- compatible : must be one of :
-		"mediatek,mt2701-smi-larb"
-		"mediatek,mt2712-smi-larb"
-		"mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
-		"mediatek,mt8173-smi-larb"
-		"mediatek,mt8183-smi-larb"
-- reg : the register and size of this local arbiter.
-- mediatek,smi : a phandle to the smi_common node.
-- power-domains : a phandle to the power domain of this local arbiter.
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names: must contain 2 entries, as follows:
-  - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
-	    the register.
-  - "smi" : It's the clock for transfer data and command.
-  and this optional clock name:
-  - "gals": the clock for GALS(Global Async Local Sync).
-  Here is the list which has this GALS: mt8183.
-
-Required property for mt2701, mt2712 and mt7623:
-- mediatek,larb-id :the hardware id of this larb.
-
-Example:
-	larb1: larb@16010000 {
-		compatible = "mediatek,mt8173-smi-larb";
-		reg = <0 0x16010000 0 0x1000>;
-		mediatek,smi = <&smi_common>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
-		clocks = <&vdecsys CLK_VDEC_CKEN>,
-			 <&vdecsys CLK_VDEC_LARB_CKEN>;
-		clock-names = "apb", "smi";
-	};
-
-Example for mt2701:
-	larb0: larb@14010000 {
-		compatible = "mediatek,mt2701-smi-larb";
-		reg = <0 0x14010000 0 0x1000>;
-		mediatek,smi = <&smi_common>;
-		mediatek,larb-id = <0>;
-		clocks = <&mmsys CLK_MM_SMI_LARB0>,
-			 <&mmsys CLK_MM_SMI_LARB0>;
-		clock-names = "apb", "smi";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
new file mode 100644
index 000000000000..5f4ac3609887
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-larb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SMI (Smart Multimedia Interface) Local Arbiter
+
+maintainers:
+  - Yong Wu <yong.wu@mediatek.com>
+
+description: |
+  The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-smi-larb
+          - mediatek,mt2712-smi-larb
+          - mediatek,mt6779-smi-larb
+          - mediatek,mt6795-smi-larb
+          - mediatek,mt8167-smi-larb
+          - mediatek,mt8173-smi-larb
+          - mediatek,mt8183-smi-larb
+          - mediatek,mt8186-smi-larb
+          - mediatek,mt8188-smi-larb
+          - mediatek,mt8192-smi-larb
+          - mediatek,mt8195-smi-larb
+
+      - description: for mt7623
+        items:
+          - const: mediatek,mt7623-smi-larb
+          - const: mediatek,mt2701-smi-larb
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: |
+      apb and smi are mandatory. gals(global async local sync) is optional.
+    minItems: 2
+    items:
+      - description: apb is Advanced Peripheral Bus clock, It's the clock for
+          setting the register.
+      - description: smi is the clock for transfer data and command.
+      - description: the clock for gals.
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  power-domains:
+    maxItems: 1
+
+  mediatek,smi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the smi_common node.
+
+  mediatek,larb-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: the hardware id of this larb. It's only required when this
+      hardward id is not consecutive from its M4U point of view.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+allOf:
+  - if:  # HW has gals
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8183-smi-larb
+            - mediatek,mt8186-smi-larb
+            - mediatek,mt8188-smi-larb
+            - mediatek,mt8195-smi-larb
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          items:
+            - const: apb
+            - const: smi
+            - const: gals
+
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: apb
+            - const: smi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-smi-larb
+              - mediatek,mt2712-smi-larb
+              - mediatek,mt6779-smi-larb
+              - mediatek,mt8186-smi-larb
+              - mediatek,mt8188-smi-larb
+              - mediatek,mt8192-smi-larb
+              - mediatek,mt8195-smi-larb
+
+    then:
+      required:
+        - mediatek,larb-id
+
+additionalProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    larb1: larb@16010000 {
+      compatible = "mediatek,mt8173-smi-larb";
+      reg = <0x16010000 0x1000>;
+      mediatek,smi = <&smi_common>;
+      power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+      clocks = <&vdecsys CLK_VDEC_CKEN>,
+               <&vdecsys CLK_VDEC_LARB_CKEN>;
+      clock-names = "apb", "smi";
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mvebu-sdram-controller.txt b/Documentation/devicetree/bindings/memory-controllers/mvebu-sdram-controller.txt
deleted file mode 100644
index 89657d1d4cd4..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/mvebu-sdram-controller.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Device Tree bindings for MVEBU SDRAM controllers
-
-The Marvell EBU SoCs all have a SDRAM controller. The SDRAM controller
-differs from one SoC variant to another, but they also share a number
-of commonalities.
-
-For now, this Device Tree binding documentation only documents the
-Armada XP SDRAM controller.
-
-Required properties:
-
- - compatible: for Armada XP, "marvell,armada-xp-sdram-controller"
- - reg: a resource specifier for the register space, which should
-   include all SDRAM controller registers as per the datasheet.
-
-Example:
-
-sdramc@1400 {
-	compatible = "marvell,armada-xp-sdram-controller";
-	reg = <0x1400 0x500>;
-};
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
index 3e0a8a92d652..9163c3f12a85 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
@@ -29,11 +29,24 @@ properties:
     items:
       - const: emc
 
+  "#interconnect-cells":
+    const: 0
+
   nvidia,memory-controller:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       phandle of the memory controller node
 
+  power-domains:
+    maxItems: 1
+    description:
+      Phandle of the SoC "core" power domain.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC speedo ID mask.
+
 patternProperties:
   "^emc-timings-[0-9]+$":
     type: object
@@ -73,10 +86,9 @@ patternProperties:
               timings
 
           nvidia,emc-auto-cal-interval:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               pad calibration interval in microseconds
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 2097151
 
@@ -136,11 +148,10 @@ patternProperties:
               value of the EMC_XM2DQSPADCTRL2 register for this set of timings
 
           nvidia,emc-zcal-cnt-long:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               number of EMC clocks to wait before issuing any commands after
               clock change
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 1023
 
@@ -150,12 +161,11 @@ patternProperties:
               value of the EMC_ZCAL_INTERVAL register for this set of timings
 
           nvidia,emc-configuration:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32-array
             description:
               EMC timing characterization data. These are the registers (see
               section "15.6.2 EMC Registers" in the TRM) whose values need to
               be specified, according to the board documentation.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
             items:
               - description: EMC_RC
               - description: EMC_RFC
@@ -330,6 +340,8 @@ required:
   - clocks
   - clock-names
   - nvidia,memory-controller
+  - "#interconnect-cells"
+  - operating-points-v2
 
 additionalProperties: false
 
@@ -340,7 +352,7 @@ examples:
 
     mc: memory-controller@70019000 {
         compatible = "nvidia,tegra124-mc";
-        reg = <0x0 0x70019000 0x0 0x1000>;
+        reg = <0x70019000 0x1000>;
         clocks = <&tegra_car TEGRA124_CLK_MC>;
         clock-names = "mc";
 
@@ -348,15 +360,20 @@ examples:
 
         #iommu-cells = <1>;
         #reset-cells = <1>;
+        #interconnect-cells = <1>;
     };
 
     external-memory-controller@7001b000 {
         compatible = "nvidia,tegra124-emc";
-        reg = <0x0 0x7001b000 0x0 0x1000>;
+        reg = <0x7001b000 0x1000>;
         clocks = <&car TEGRA124_CLK_EMC>;
         clock-names = "emc";
 
         nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+        power-domains = <&domain>;
+
+        #interconnect-cells = <0>;
 
         emc-timings-0 {
             nvidia,ram-code = <3>;
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml
index 22a94b6fdbde..7b18b4d11e0a 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml
@@ -40,6 +40,9 @@ properties:
   "#iommu-cells":
     const: 1
 
+  "#interconnect-cells":
+    const: 1
+
 patternProperties:
   "^emc-timings-[0-9]+$":
     type: object
@@ -60,8 +63,7 @@ patternProperties:
             maximum: 1066000000
 
           nvidia,emem-configuration:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32-array
+            $ref: /schemas/types.yaml#/definitions/uint32-array
             description: |
               Values to be written to the EMEM register block. See section
               "15.6.1 MC Registers" in the TRM.
@@ -105,6 +107,7 @@ required:
   - clock-names
   - "#reset-cells"
   - "#iommu-cells"
+  - "#interconnect-cells"
 
 additionalProperties: false
 
@@ -112,7 +115,7 @@ examples:
   - |
     memory-controller@70019000 {
         compatible = "nvidia,tegra124-mc";
-        reg = <0x0 0x70019000 0x0 0x1000>;
+        reg = <0x70019000 0x1000>;
         clocks = <&tegra_car 32>;
         clock-names = "mc";
 
@@ -120,6 +123,7 @@ examples:
 
         #iommu-cells = <1>;
         #reset-cells = <1>;
+        #interconnect-cells = <1>;
 
         emc-timings-3 {
             nvidia,ram-code = <3>;
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
index 12516bd89cf9..935d63d181d9 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -31,12 +31,19 @@ properties:
       - enum:
           - nvidia,tegra186-mc
           - nvidia,tegra194-mc
+          - nvidia,tegra234-mc
 
   reg:
-    maxItems: 1
+    minItems: 6
+    maxItems: 18
+
+  reg-names:
+    minItems: 6
+    maxItems: 18
 
   interrupts:
-    maxItems: 1
+    items:
+      - description: MC general interrupt
 
   "#address-cells":
     const: 2
@@ -48,6 +55,9 @@ properties:
 
   dma-ranges: true
 
+  "#interconnect-cells":
+    const: 1
+
 patternProperties:
   "^external-memory-controller@[0-9a-f]+$":
     description:
@@ -63,12 +73,15 @@ patternProperties:
           - enum:
               - nvidia,tegra186-emc
               - nvidia,tegra194-emc
+              - nvidia,tegra234-emc
 
       reg:
-        maxItems: 1
+        minItems: 1
+        maxItems: 2
 
       interrupts:
-        maxItems: 1
+        items:
+          - description: EMC general interrupt
 
       clocks:
         items:
@@ -78,53 +91,186 @@ patternProperties:
         items:
           - const: emc
 
+      "#interconnect-cells":
+        const: 0
+
       nvidia,bpmp:
         $ref: /schemas/types.yaml#/definitions/phandle
         description:
           phandle of the node representing the BPMP
 
+    allOf:
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra186-emc
+        then:
+          properties:
+            reg:
+              maxItems: 1
+
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra194-emc
+        then:
+          properties:
+            reg:
+              minItems: 2
+
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra234-emc
+        then:
+          properties:
+            reg:
+              minItems: 2
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - clocks
+      - clock-names
+      - "#interconnect-cells"
+      - nvidia,bpmp
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra186-mc
+    then:
+      properties:
+        reg:
+          maxItems: 6
+          description: 5 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra194-mc
+    then:
+      properties:
+        reg:
+          minItems: 18
+          description: 17 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+            - const: ch4
+            - const: ch5
+            - const: ch6
+            - const: ch7
+            - const: ch8
+            - const: ch9
+            - const: ch10
+            - const: ch11
+            - const: ch12
+            - const: ch13
+            - const: ch14
+            - const: ch15
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra234-mc
+    then:
+      properties:
+        reg:
+          minItems: 18
+          description: 17 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+            - const: ch4
+            - const: ch5
+            - const: ch6
+            - const: ch7
+            - const: ch8
+            - const: ch9
+            - const: ch10
+            - const: ch11
+            - const: ch12
+            - const: ch13
+            - const: ch14
+            - const: ch15
+
+additionalProperties: false
+
 required:
   - compatible
   - reg
+  - reg-names
   - interrupts
   - "#address-cells"
   - "#size-cells"
 
-additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/clock/tegra186-clock.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    memory-controller@2c00000 {
-        compatible = "nvidia,tegra186-mc";
-        reg = <0x0 0x02c00000 0x0 0xb0000>;
-        interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-
+    bus {
         #address-cells = <2>;
         #size-cells = <2>;
 
-        ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>;
+        memory-controller@2c00000 {
+            compatible = "nvidia,tegra186-mc";
+            reg = <0x0 0x02c00000 0x0 0x10000>,    /* MC-SID */
+                  <0x0 0x02c10000 0x0 0x10000>,    /* Broadcast channel */
+                  <0x0 0x02c20000 0x0 0x10000>,    /* MC0 */
+                  <0x0 0x02c30000 0x0 0x10000>,    /* MC1 */
+                  <0x0 0x02c40000 0x0 0x10000>,    /* MC2 */
+                  <0x0 0x02c50000 0x0 0x10000>;    /* MC3 */
+            reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3";
+            interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 
-        /*
-         * Memory clients have access to all 40 bits that the memory
-         * controller can address.
-         */
-        dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+            #address-cells = <2>;
+            #size-cells = <2>;
 
-        external-memory-controller@2c60000 {
-            compatible = "nvidia,tegra186-emc";
-            reg = <0x0 0x02c60000 0x0 0x50000>;
-            interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&bpmp TEGRA186_CLK_EMC>;
-            clock-names = "emc";
+            ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>;
 
-            nvidia,bpmp = <&bpmp>;
-        };
-    };
+            /*
+             * Memory clients have access to all 40 bits that the memory
+             * controller can address.
+             */
+            dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
-    bpmp: bpmp {
-        compatible = "nvidia,tegra186-bpmp";
-        #clock-cells = <1>;
+            external-memory-controller@2c60000 {
+                compatible = "nvidia,tegra186-emc";
+                reg = <0x0 0x02c60000 0x0 0x50000>;
+                interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&bpmp TEGRA186_CLK_EMC>;
+                clock-names = "emc";
+
+                #interconnect-cells = <0>;
+
+                nvidia,bpmp = <&bpmp>;
+            };
+        };
     };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt
deleted file mode 100644
index add95367640b..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-Embedded Memory Controller
-
-Properties:
-- name : Should be emc
-- #address-cells : Should be 1
-- #size-cells : Should be 0
-- compatible : Should contain "nvidia,tegra20-emc".
-- reg : Offset and length of the register set for the device
-- nvidia,use-ram-code : If present, the sub-nodes will be addressed
-  and chosen using the ramcode board selector. If omitted, only one
-  set of tables can be present and said tables will be used
-  irrespective of ram-code configuration.
-- interrupts : Should contain EMC General interrupt.
-- clocks : Should contain EMC clock.
-
-Child device nodes describe the memory settings for different configurations and clock rates.
-
-Example:
-
-	memory-controller@7000f400 {
-		#address-cells = < 1 >;
-		#size-cells = < 0 >;
-		compatible = "nvidia,tegra20-emc";
-		reg = <0x7000f4000 0x200>;
-		interrupts = <0 78 0x04>;
-		clocks = <&tegra_car TEGRA20_CLK_EMC>;
-	}
-
-
-Embedded Memory Controller ram-code table
-
-If the emc node has the nvidia,use-ram-code property present, then the
-next level of nodes below the emc table are used to specify which settings
-apply for which ram-code settings.
-
-If the emc node lacks the nvidia,use-ram-code property, this level is omitted
-and the tables are stored directly under the emc node (see below).
-
-Properties:
-
-- name : Should be emc-tables
-- nvidia,ram-code : the binary representation of the ram-code board strappings
-  for which this node (and children) are valid.
-
-
-
-Embedded Memory Controller configuration table
-
-This is a table containing the EMC register settings for the various
-operating speeds of the memory controller. They are always located as
-subnodes of the emc controller node.
-
-There are two ways of specifying which tables to use:
-
-* The simplest is if there is just one set of tables in the device tree,
-  and they will always be used (based on which frequency is used).
-  This is the preferred method, especially when firmware can fill in
-  this information based on the specific system information and just
-  pass it on to the kernel.
-
-* The slightly more complex one is when more than one memory configuration
-  might exist on the system.  The Tegra20 platform handles this during
-  early boot by selecting one out of possible 4 memory settings based
-  on a 2-pin "ram code" bootstrap setting on the board. The values of
-  these strappings can be read through a register in the SoC, and thus
-  used to select which tables to use.
-
-Properties:
-- name : Should be emc-table
-- compatible : Should contain "nvidia,tegra20-emc-table".
-- reg : either an opaque enumerator to tell different tables apart, or
-  the valid frequency for which the table should be used (in kHz).
-- clock-frequency : the clock frequency for the EMC at which this
-  table should be used (in kHz).
-- nvidia,emc-registers : a 46 word array of EMC registers to be programmed
-  for operation at the 'clock-frequency' setting.
-  The order and contents of the registers are:
-    RC, RFC, RAS, RP, R2W, W2R, R2P, W2P, RD_RCD, WR_RCD, RRD, REXT,
-    WDV, QUSE, QRST, QSAFE, RDV, REFRESH, BURST_REFRESH_NUM, PDEX2WR,
-    PDEX2RD, PCHG2PDEN, ACT2PDEN, AR2PDEN, RW2PDEN, TXSR, TCKE, TFAW,
-    TRPAB, TCLKSTABLE, TCLKSTOP, TREFBW, QUSE_EXTRA, FBIO_CFG6, ODT_WRITE,
-    ODT_READ, FBIO_CFG5, CFG_DIG_DLL, DLL_XFORM_DQS, DLL_XFORM_QUSE,
-    ZCAL_REF_CNT, ZCAL_WAIT_CNT, AUTO_CAL_INTERVAL, CFG_CLKTRIM_0,
-    CFG_CLKTRIM_1, CFG_CLKTRIM_2
-
-		emc-table@166000 {
-			reg = <166000>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = < 166000 >;
-			nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-						 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-						 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-						 0 0 0 0 >;
-		};
-
-		emc-table@333000 {
-			reg = <333000>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = < 333000 >;
-			nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-						 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-						 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-						 0 0 0 0 >;
-		};
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
new file mode 100644
index 000000000000..2fa44951cfde
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
@@ -0,0 +1,249 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra20-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 SoC External Memory Controller
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The External Memory Controller (EMC) interfaces with the off-chip SDRAM to
+  service the request stream sent from Memory Controller. The EMC also has
+  various performance-affecting settings beyond the obvious SDRAM configuration
+  parameters and initialization settings. Tegra20 EMC supports multiple JEDEC
+  standard protocols: DDR1, LPDDR2 and DDR2.
+
+properties:
+  compatible:
+    const: nvidia,tegra20-emc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#interconnect-cells":
+    const: 0
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of the Memory Controller node.
+
+  power-domains:
+    maxItems: 1
+    description:
+      Phandle of the SoC "core" power domain.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC process ID mask.
+
+  nvidia,use-ram-code:
+    type: boolean
+    description:
+      If present, the emc-tables@ sub-nodes will be addressed.
+
+$defs:
+  emc-table:
+    type: object
+    properties:
+      compatible:
+        const: nvidia,tegra20-emc-table
+
+      clock-frequency:
+        description:
+          Memory clock rate in kHz.
+        minimum: 1000
+        maximum: 900000
+
+      reg:
+        maxItems: 1
+        description:
+          Either an opaque enumerator to tell different tables apart, or
+          the valid frequency for which the table should be used (in kHz).
+
+      nvidia,emc-registers:
+        description:
+          EMC timing characterization data. These are the registers
+          (see section "15.4.1 EMC Registers" in the TRM) whose values
+          need to be specified, according to the board documentation.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: EMC_RC
+          - description: EMC_RFC
+          - description: EMC_RAS
+          - description: EMC_RP
+          - description: EMC_R2W
+          - description: EMC_W2R
+          - description: EMC_R2P
+          - description: EMC_W2P
+          - description: EMC_RD_RCD
+          - description: EMC_WR_RCD
+          - description: EMC_RRD
+          - description: EMC_REXT
+          - description: EMC_WDV
+          - description: EMC_QUSE
+          - description: EMC_QRST
+          - description: EMC_QSAFE
+          - description: EMC_RDV
+          - description: EMC_REFRESH
+          - description: EMC_BURST_REFRESH_NUM
+          - description: EMC_PDEX2WR
+          - description: EMC_PDEX2RD
+          - description: EMC_PCHG2PDEN
+          - description: EMC_ACT2PDEN
+          - description: EMC_AR2PDEN
+          - description: EMC_RW2PDEN
+          - description: EMC_TXSR
+          - description: EMC_TCKE
+          - description: EMC_TFAW
+          - description: EMC_TRPAB
+          - description: EMC_TCLKSTABLE
+          - description: EMC_TCLKSTOP
+          - description: EMC_TREFBW
+          - description: EMC_QUSE_EXTRA
+          - description: EMC_FBIO_CFG6
+          - description: EMC_ODT_WRITE
+          - description: EMC_ODT_READ
+          - description: EMC_FBIO_CFG5
+          - description: EMC_CFG_DIG_DLL
+          - description: EMC_DLL_XFORM_DQS
+          - description: EMC_DLL_XFORM_QUSE
+          - description: EMC_ZCAL_REF_CNT
+          - description: EMC_ZCAL_WAIT_CNT
+          - description: EMC_AUTO_CAL_INTERVAL
+          - description: EMC_CFG_CLKTRIM_0
+          - description: EMC_CFG_CLKTRIM_1
+          - description: EMC_CFG_CLKTRIM_2
+
+    required:
+      - clock-frequency
+      - compatible
+      - reg
+      - nvidia,emc-registers
+
+    additionalProperties: false
+
+patternProperties:
+  "^emc-table@[0-9]+$":
+    $ref: "#/$defs/emc-table"
+
+  "^emc-tables@[a-z0-9-]+$":
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+        description:
+          An opaque enumerator to tell different tables apart.
+
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Value of RAM_CODE this timing set is used for.
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      lpddr2:
+        $ref: "ddr/jedec,lpddr2.yaml#"
+        type: object
+
+    patternProperties:
+      "^emc-table@[0-9]+$":
+        $ref: "#/$defs/emc-table"
+
+    oneOf:
+      - required:
+          - nvidia,ram-code
+
+      - required:
+          - lpddr2
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - nvidia,memory-controller
+  - "#interconnect-cells"
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    external-memory-controller@7000f400 {
+        compatible = "nvidia,tegra20-emc";
+        reg = <0x7000f400 0x400>;
+        interrupts = <0 78 4>;
+        clocks = <&clock_controller 57>;
+
+        nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+        power-domains = <&domain>;
+
+        #interconnect-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nvidia,use-ram-code;
+
+        emc-tables@0 {
+            nvidia,ram-code = <0>;
+            reg = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            emc-table@333000 {
+                reg = <333000>;
+                compatible = "nvidia,tegra20-emc-table";
+                clock-frequency = <333000>;
+                nvidia,emc-registers = <0x00000018 0x00000033
+                        0x00000012 0x00000004 0x00000004 0x00000005
+                        0x00000003 0x0000000c 0x00000006 0x00000006
+                        0x00000003 0x00000001 0x00000004 0x00000005
+                        0x00000004 0x00000009 0x0000000d 0x00000bff
+                        0x00000000 0x00000003 0x00000003 0x00000006
+                        0x00000006 0x00000001 0x00000011 0x000000c8
+                        0x00000003 0x0000000e 0x00000007 0x00000008
+                        0x00000002 0x00000000 0x00000000 0x00000002
+                        0x00000000 0x00000000 0x00000083 0xf0440303
+                        0x007fe010 0x00001414 0x00000000 0x00000000
+                        0x00000000 0x00000000 0x00000000 0x00000000>;
+            };
+        };
+
+        emc-tables@1 {
+            reg = <1>;
+
+            lpddr2 {
+                compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+                revision-id1 = <1>;
+                density = <2048>;
+                io-width = <16>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
deleted file mode 100644
index e55328237df4..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-NVIDIA Tegra20 MC(Memory Controller)
-
-Required properties:
-- compatible : "nvidia,tegra20-mc-gart"
-- reg : Should contain 2 register ranges: physical base address and length of
-  the controller's registers and the GART aperture respectively.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - mc: the module's clock input
-- interrupts : Should contain MC General interrupt.
-- #reset-cells : Should be 1. This cell represents memory client module ID.
-  The assignments may be found in header file <dt-bindings/memory/tegra20-mc.h>
-  or in the TRM documentation.
-- #iommu-cells: Should be 0. This cell represents the number of cells in an
-  IOMMU specifier needed to encode an address. GART supports only a single
-  address space that is shared by all devices, therefore no additional
-  information needed for the address encoding.
-
-Example:
-	mc: memory-controller@7000f000 {
-		compatible = "nvidia,tegra20-mc-gart";
-		reg = <0x7000f000 0x400		/* controller registers */
-		       0x58000000 0x02000000>;	/* GART aperture */
-		clocks = <&tegra_car TEGRA20_CLK_MC>;
-		clock-names = "mc";
-		interrupts = <GIC_SPI 77 0x04>;
-		#reset-cells = <1>;
-		#iommu-cells = <0>;
-	};
-
-	video-codec@6001a000 {
-		compatible = "nvidia,tegra20-vde";
-		...
-		resets = <&mc TEGRA20_MC_RESET_VDE>;
-		iommus = <&mc>;
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.yaml
new file mode 100644
index 000000000000..55caf6905399
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra20-mc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 SoC Memory Controller
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The Tegra20 Memory Controller merges request streams from various client
+  interfaces into request stream(s) for the various memory target devices,
+  and returns response data to the various clients. The Memory Controller
+  has a configurable arbitration algorithm to allow the user to fine-tune
+  performance among the various clients.
+
+  Tegra20 Memory Controller includes the GART (Graphics Address Relocation
+  Table) which allows Memory Controller to provide a linear view of a
+  fragmented memory pages.
+
+properties:
+  compatible:
+    const: nvidia,tegra20-mc-gart
+
+  reg:
+    items:
+      - description: controller registers
+      - description: GART registers
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mc
+
+  interrupts:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+  "#iommu-cells":
+    const: 0
+
+  "#interconnect-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#reset-cells"
+  - "#iommu-cells"
+  - "#interconnect-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@7000f000 {
+        compatible = "nvidia,tegra20-mc-gart";
+        reg = <0x7000f000 0x400>,	/* Controller registers */
+              <0x58000000 0x02000000>;	/* GART aperture */
+        clocks = <&clock_controller 32>;
+        clock-names = "mc";
+
+        interrupts = <0 77 4>;
+
+        #iommu-cells = <0>;
+        #reset-cells = <1>;
+        #interconnect-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
new file mode 100644
index 000000000000..bc8477e7ab19
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra210-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 SoC External Memory Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The EMC interfaces with the off-chip SDRAM to service the request stream
+  sent from the memory controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra210-emc
+
+  reg:
+    maxItems: 3
+
+  clocks:
+    items:
+      - description: external memory clock
+
+  clock-names:
+    items:
+      - const: emc
+
+  interrupts:
+    items:
+      - description: EMC general interrupt
+
+  memory-region:
+    maxItems: 1
+    description:
+      phandle to a reserved memory region describing the table of EMC
+      frequencies trained by the firmware
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of the memory controller node
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - nvidia,memory-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        emc_table: emc-table@83400000 {
+            compatible = "nvidia,tegra210-emc-table";
+            reg = <0x83400000 0x10000>;
+        };
+    };
+
+    external-memory-controller@7001b000 {
+        compatible = "nvidia,tegra210-emc";
+        reg = <0x7001b000 0x1000>,
+              <0x7001e000 0x1000>,
+              <0x7001f000 0x1000>;
+        clocks = <&tegra_car TEGRA210_CLK_EMC>;
+        clock-names = "emc";
+        interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+        memory-region = <&emc_table>;
+        nvidia,memory-controller = <&mc>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml
index e4135bac6957..fb6af14cb49c 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml
@@ -31,11 +31,24 @@ properties:
   interrupts:
     maxItems: 1
 
+  "#interconnect-cells":
+    const: 0
+
   nvidia,memory-controller:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Phandle of the Memory Controller node.
 
+  power-domains:
+    maxItems: 1
+    description:
+      Phandle of the SoC "core" power domain.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC speedo ID mask.
+
 patternProperties:
   "^emc-timings-[0-9]+$":
     type: object
@@ -56,10 +69,9 @@ patternProperties:
             maximum: 900000000
 
           nvidia,emc-auto-cal-interval:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               Pad calibration interval in microseconds.
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 2097151
 
@@ -79,11 +91,10 @@ patternProperties:
               Mode Register 0.
 
           nvidia,emc-zcal-cnt-long:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               Number of EMC clocks to wait before issuing any commands after
               sending ZCAL_MRW_CMD.
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 1023
 
@@ -98,12 +109,11 @@ patternProperties:
               FBIO "read" FIFO periodic resetting enabled.
 
           nvidia,emc-configuration:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32-array
             description:
               EMC timing characterization data. These are the registers
               (see section "18.13.2 EMC Registers" in the TRM) whose values
               need to be specified, according to the board documentation.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
             items:
               - description: EMC_RC
               - description: EMC_RFC
@@ -217,6 +227,8 @@ required:
   - interrupts
   - clocks
   - nvidia,memory-controller
+  - "#interconnect-cells"
+  - operating-points-v2
 
 additionalProperties: false
 
@@ -229,6 +241,10 @@ examples:
         clocks = <&tegra_car 57>;
 
         nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+        power-domains = <&domain>;
+
+        #interconnect-cells = <0>;
 
         emc-timings-1 {
             nvidia,ram-code = <1>;
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml
index 4b9196c83291..5436e6d420bc 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml
@@ -57,6 +57,9 @@ properties:
   "#iommu-cells":
     const: 1
 
+  "#interconnect-cells":
+    const: 1
+
 patternProperties:
   "^emc-timings-[0-9]+$":
     type: object
@@ -77,8 +80,7 @@ patternProperties:
             maximum: 900000000
 
           nvidia,emem-configuration:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32-array
+            $ref: /schemas/types.yaml#/definitions/uint32-array
             description: |
               Values to be written to the EMEM register block. See section
               "18.13.1 MC Registers" in the TRM.
@@ -121,6 +123,7 @@ required:
   - clock-names
   - "#reset-cells"
   - "#iommu-cells"
+  - "#interconnect-cells"
 
 additionalProperties: false
 
@@ -136,6 +139,7 @@ examples:
 
         #iommu-cells = <1>;
         #reset-cells = <1>;
+        #interconnect-cells = <1>;
 
         emc-timings-1 {
             nvidia,ram-code = <1>;
diff --git a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
deleted file mode 100644
index c1359f4d48d7..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
+++ /dev/null
@@ -1,157 +0,0 @@
-Device tree bindings for OMAP general purpose memory controllers (GPMC)
-
-The actual devices are instantiated from the child nodes of a GPMC node.
-
-Required properties:
-
- - compatible:		Should be set to one of the following:
-
-			ti,omap2420-gpmc (omap2420)
-			ti,omap2430-gpmc (omap2430)
-			ti,omap3430-gpmc (omap3430 & omap3630)
-			ti,omap4430-gpmc (omap4430 & omap4460 & omap543x)
-			ti,am3352-gpmc   (am335x devices)
-
- - reg:			A resource specifier for the register space
-			(see the example below)
- - ti,hwmods:		Should be set to "ti,gpmc" until the DT transition is
-			completed.
- - #address-cells:	Must be set to 2 to allow memory address translation
- - #size-cells:		Must be set to 1 to allow CS address passing
- - gpmc,num-cs:		The maximum number of chip-select lines that controller
-			can support.
- - gpmc,num-waitpins:	The maximum number of wait pins that controller can
-			support.
- - ranges:		Must be set up to reflect the memory layout with four
-			integer values for each chip-select line in use:
-
-			   <cs-number> 0 <physical address of mapping> <size>
-
-			Currently, calculated values derived from the contents
-			of the per-CS register GPMC_CONFIG7 (as set up by the
-			bootloader) are used for the physical address decoding.
-			As this will change in the future, filling correct
-			values here is a requirement.
- - interrupt-controller: The GPMC driver implements and interrupt controller for
-			the NAND events "fifoevent" and "termcount" plus the
-			rising/falling edges on the GPMC_WAIT pins.
-			The interrupt number mapping is as follows
-			0 - NAND_fifoevent
-			1 - NAND_termcount
-			2 - GPMC_WAIT0 pin edge
-			3 - GPMC_WAIT1 pin edge, and so on.
- - interrupt-cells:	Must be set to 2
- - gpio-controller:	The GPMC driver implements a GPIO controller for the
-			GPMC WAIT pins that can be used as general purpose inputs.
-			0 maps to GPMC_WAIT0 pin.
- - gpio-cells:		Must be set to 2
-
-Required properties when using NAND prefetch dma:
- - dmas			GPMC NAND prefetch dma channel
- - dma-names		Must be set to "rxtx"
-
-Timing properties for child nodes. All are optional and default to 0.
-
- - gpmc,sync-clk-ps:	Minimum clock period for synchronous mode, in picoseconds
-
- Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2:
- - gpmc,cs-on-ns:	Assertion time
- - gpmc,cs-rd-off-ns:	Read deassertion time
- - gpmc,cs-wr-off-ns:	Write deassertion time
-
- ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3:
- - gpmc,adv-on-ns:	Assertion time
- - gpmc,adv-rd-off-ns:	Read deassertion time
- - gpmc,adv-wr-off-ns:	Write deassertion time
- - gpmc,adv-aad-mux-on-ns:	Assertion time for AAD
- - gpmc,adv-aad-mux-rd-off-ns:	Read deassertion time for AAD
- - gpmc,adv-aad-mux-wr-off-ns:	Write deassertion time for AAD
-
- WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
- - gpmc,we-on-ns	Assertion time
- - gpmc,we-off-ns:	Deassertion time
-
- OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
- - gpmc,oe-on-ns:	Assertion time
- - gpmc,oe-off-ns:	Deassertion time
- - gpmc,oe-aad-mux-on-ns:	Assertion time for AAD
- - gpmc,oe-aad-mux-off-ns:	Deassertion time for AAD
-
- Access time and cycle time timings (in nanoseconds) corresponding to
- GPMC_CONFIG5:
- - gpmc,page-burst-access-ns: 	Multiple access word delay
- - gpmc,access-ns:		Start-cycle to first data valid delay
- - gpmc,rd-cycle-ns:		Total read cycle time
- - gpmc,wr-cycle-ns:		Total write cycle time
- - gpmc,bus-turnaround-ns:	Turn-around time between successive accesses
- - gpmc,cycle2cycle-delay-ns:	Delay between chip-select pulses
- - gpmc,clk-activation-ns: 	GPMC clock activation time
- - gpmc,wait-monitoring-ns:	Start of wait monitoring with regard to valid
-				data
-
-Boolean timing parameters. If property is present parameter enabled and
-disabled if omitted:
- - gpmc,adv-extra-delay:	ADV signal is delayed by half GPMC clock
- - gpmc,cs-extra-delay:		CS signal is delayed by half GPMC clock
- - gpmc,cycle2cycle-diffcsen:	Add "cycle2cycle-delay" between successive
-				accesses to a different CS
- - gpmc,cycle2cycle-samecsen:	Add "cycle2cycle-delay" between successive
-				accesses to the same CS
- - gpmc,oe-extra-delay:		OE signal is delayed by half GPMC clock
- - gpmc,we-extra-delay:		WE signal is delayed by half GPMC clock
- - gpmc,time-para-granularity:	Multiply all access times by 2
-
-The following are only applicable to OMAP3+ and AM335x:
- - gpmc,wr-access-ns:		In synchronous write mode, for single or
-				burst accesses, defines the number of
-				GPMC_FCLK cycles from start access time
-				to the GPMC_CLK rising edge used by the
-				memory device for the first data capture.
- - gpmc,wr-data-mux-bus-ns:	In address-data multiplex mode, specifies
-				the time when the first data is driven on
-				the address-data bus.
-
-GPMC chip-select settings properties for child nodes. All are optional.
-
-- gpmc,burst-length	Page/burst length. Must be 4, 8 or 16.
-- gpmc,burst-wrap	Enables wrap bursting
-- gpmc,burst-read	Enables read page/burst mode
-- gpmc,burst-write	Enables write page/burst mode
-- gpmc,device-width	Total width of device(s) connected to a GPMC
-			chip-select in bytes. The GPMC supports 8-bit
-			and 16-bit devices and so this property must be
-			1 or 2.
-- gpmc,mux-add-data	Address and data multiplexing configuration.
-			Valid values are 1 for address-address-data
-			multiplexing mode and 2 for address-data
-			multiplexing mode.
-- gpmc,sync-read	Enables synchronous read. Defaults to asynchronous
-			is this is not set.
-- gpmc,sync-write	Enables synchronous writes. Defaults to asynchronous
-			is this is not set.
-- gpmc,wait-pin		Wait-pin used by client. Must be less than
-			"gpmc,num-waitpins".
-- gpmc,wait-on-read	Enables wait monitoring on reads.
-- gpmc,wait-on-write	Enables wait monitoring on writes.
-
-Example for an AM33xx board:
-
-	gpmc: gpmc@50000000 {
-		compatible = "ti,am3352-gpmc";
-		ti,hwmods = "gpmc";
-		reg = <0x50000000 0x2000>;
-		interrupts = <100>;
-		dmas = <&edma 52 0>;
-		dma-names = "rxtx";
-		gpmc,num-cs = <8>;
-		gpmc,num-waitpins = <2>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		/* child nodes go here */
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
deleted file mode 100644
index d56615fd343a..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Device tree bindings for ARM PL353 static memory controller
-
-PL353 static memory controller supports two kinds of memory
-interfaces.i.e NAND and SRAM/NOR interfaces.
-The actual devices are instantiated from the child nodes of pl353 smc node.
-
-Required properties:
-- compatible		: Should be "arm,pl353-smc-r2p1", "arm,primecell".
-- reg			: Controller registers map and length.
-- clock-names		: List of input clock names - "memclk", "apb_pclk"
-			  (See clock bindings for details).
-- clocks		: Clock phandles (see clock bindings for details).
-- address-cells		: Must be 2.
-- size-cells		: Must be 1.
-
-Child nodes:
- For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are
-supported as child nodes.
-
-for NAND partition information please refer the below file
-Documentation/devicetree/bindings/mtd/partition.txt
-
-Example:
-	smcc: memory-controller@e000e000
-			compatible = "arm,pl353-smc-r2p1", "arm,primecell";
-			clock-names = "memclk", "apb_pclk";
-			clocks = <&clkc 11>, <&clkc 44>;
-			reg = <0xe000e000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0xe1000000 0x1000000 //Nand CS Region
-				  0x1 0x0 0xe2000000 0x2000000 //SRAM/NOR CS Region
-				  0x2 0x0 0xe4000000 0x2000000>; //SRAM/NOR CS Region
-			nand_0: flash@e1000000 {
-				compatible = "arm,pl353-nand-r2p1"
-				reg = <0 0 0x1000000>;
-				(...)
-			};
-			nor0: flash@e2000000 {
-				compatible = "cfi-flash";
-				reg = <1 0 0x2000000>;
-			};
-			nor1: flash@e4000000 {
-				compatible = "cfi-flash";
-				reg = <2 0 0x2000000>;
-			};
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml
new file mode 100644
index 000000000000..0c511ab906bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/qca,ath79-ddr-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR7xxx/AR9xxx DDR controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The DDR controller of the AR7xxx and AR9xxx families provides an interface to
+  flush the FIFO between various devices and the DDR. This is mainly used by
+  the IRQ controller to flush the FIFO before running the interrupt handler of
+  such devices.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qca,ar9132-ddr-controller
+          - const: qca,ar7240-ddr-controller
+      - items:
+          - enum:
+              - qca,ar7100-ddr-controller
+              - qca,ar7240-ddr-controller
+
+  "#qca,ddr-wb-channel-cells":
+    description: |
+      Specifies the number of cells needed to encode the write buffer channel
+      index.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#qca,ddr-wb-channel-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ddr_ctrl: memory-controller@18000000 {
+        compatible = "qca,ar9132-ddr-controller",
+                     "qca,ar7240-ddr-controller";
+        reg = <0x18000000 0x100>;
+
+        #qca,ddr-wb-channel-cells = <1>;
+    };
+
+    interrupt-controller {
+        // ...
+        qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+        qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+                              <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.txt b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.txt
deleted file mode 100644
index 9f78e6c82740..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-DT bindings for Renesas R-Mobile and SH-Mobile memory controllers
-=================================================================
-
-Renesas R-Mobile and SH-Mobile SoCs contain one or more memory controllers.
-These memory controllers differ from one SoC variant to another, and are called
-by different names ("DDR Bus Controller (DBSC)", "DDR3 Bus State Controller
-(DBSC3)", "SDRAM Bus State Controller (SBSC)").
-
-Currently memory controller device nodes are used only to reference PM
-domains, and prevent these PM domains from being powered down, which would
-crash the system.
-
-As there exist no actual drivers for these controllers yet, these bindings
-should be considered EXPERIMENTAL for now.
-
-Required properties:
-  - compatible: Must be one of the following SoC-specific values:
-		  - "renesas,dbsc-r8a73a4" (R-Mobile APE6)
-		  - "renesas,dbsc3-r8a7740" (R-Mobile A1)
-		  - "renesas,sbsc-sh73a0" (SH-Mobile AG5)
-  - reg: Must contain the base address and length of the memory controller's
-	 registers.
-
-Optional properties:
-  - interrupts: Must contain a list of interrupt specifiers for memory
-		controller interrupts, if available.
-  - interrupt-names: Must contain a list of interrupt names corresponding to
-		     the interrupts in the interrupts property, if available.
-		     Valid interrupt names are:
-			- "sec" (secure interrupt)
-			- "temp" (normal (temperature) interrupt)
-  - power-domains: Must contain a reference to the PM domain that the memory
-		   controller belongs to, if available.
-
-Example:
-
-	sbsc1: memory-controller@fe400000 {
-		compatible = "renesas,sbsc-sh73a0";
-		reg = <0xfe400000 0x400>;
-		interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 36 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "sec", "temp";
-		power-domains = <&pd_a4bc0>;
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml
new file mode 100644
index 000000000000..7056ccb7eb30
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/memory-controllers/renesas,dbsc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas DDR Bus Controllers
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  Renesas SoCs contain one or more memory controllers.  These memory
+  controllers differ from one SoC variant to another, and are called by
+  different names, e.g. "DDR Bus Controller (DBSC)", "DDR3 Bus State Controller
+  (DBSC3)", or "SDRAM Bus State Controller (SBSC)").
+
+properties:
+  compatible:
+    enum:
+      - renesas,dbsc-r8a73a4  # R-Mobile APE6
+      - renesas,dbsc3-r8a7740 # R-Mobile A1
+      - renesas,sbsc-sh73a0   # SH-Mobile AG5
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: sec  # secure interrupt
+      - const: temp # normal (temperature) interrupt
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    sbsc1: memory-controller@fe400000 {
+            compatible = "renesas,sbsc-sh73a0";
+            reg = <0xfe400000 0x400>;
+            interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "sec", "temp";
+            power-domains = <&pd_a4bc0>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.txt b/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.txt
deleted file mode 100644
index cdf406c902e2..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-* H8/300 bus controller
-
-Required properties:
-  - compatible: Must be "renesas,h8300-bsc".
-  - reg: Base address and length of BSC registers.
-
-Example.
-	bsc: memory-controller@fee01e {
-		compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc";
-		reg = <0xfee01e 8>;
-	};
-
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
new file mode 100644
index 000000000000..645249ea21d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Reduced Pin Count Interface (RPC-IF)
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+description: |
+  Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to
+  be accessed via the external address space read mode or the manual mode.
+
+  The flash chip itself should be represented by a subnode of the RPC-IF node.
+  The flash interface is selected based on the "compatible" property of this
+  subnode:
+  - if it contains "jedec,spi-nor", then SPI is used;
+  - if it contains "cfi-flash", then HyperFlash is used.
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a774a1-rpc-if       # RZ/G2M
+              - renesas,r8a774b1-rpc-if       # RZ/G2N
+              - renesas,r8a774c0-rpc-if       # RZ/G2E
+              - renesas,r8a774e1-rpc-if       # RZ/G2H
+              - renesas,r8a7795-rpc-if        # R-Car H3
+              - renesas,r8a7796-rpc-if        # R-Car M3-W
+              - renesas,r8a77961-rpc-if       # R-Car M3-W+
+              - renesas,r8a77965-rpc-if       # R-Car M3-N
+              - renesas,r8a77970-rpc-if       # R-Car V3M
+              - renesas,r8a77980-rpc-if       # R-Car V3H
+              - renesas,r8a77990-rpc-if       # R-Car E3
+              - renesas,r8a77995-rpc-if       # R-Car D3
+              - renesas,r8a779a0-rpc-if       # R-Car V3U
+          - const: renesas,rcar-gen3-rpc-if   # a generic R-Car gen3 or RZ/G2{E,H,M,N} device
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-rpc-if      # RZ/G2UL
+              - renesas,r9a07g044-rpc-if      # RZ/G2{L,LC}
+              - renesas,r9a07g054-rpc-if      # RZ/V2L
+          - const: renesas,rzg2l-rpc-if
+
+  reg:
+    items:
+      - description: RPC-IF registers
+      - description: direct mapping read mode area
+      - description: write buffer area
+
+  reg-names:
+    items:
+      - const: regs
+      - const: dirmap
+      - const: wbuf
+
+  clocks: true
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "flash@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        contains:
+          enum:
+            - cfi-flash
+            - jedec,spi-nor
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - power-domains
+  - resets
+  - '#address-cells'
+  - '#size-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rzg2l-rpc-if
+then:
+  properties:
+    clocks:
+      items:
+        - description: SPI Multi IO Register access clock (SPI_CLK2)
+        - description: SPI Multi IO Main clock (SPI_CLK).
+
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/power/r8a77995-sysc.h>
+
+    spi@ee200000 {
+      compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if";
+      reg = <0xee200000 0x200>,
+            <0x08000000 0x4000000>,
+            <0xee208000 0x100>;
+      reg-names = "regs", "dirmap", "wbuf";
+      clocks = <&cpg CPG_MOD 917>;
+      power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+      resets = <&cpg 917>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        compatible = "jedec,spi-nor";
+        reg = <0>;
+        spi-max-frequency = <40000000>;
+        spi-tx-bus-width = <1>;
+        spi-rx-bus-width = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml
new file mode 100644
index 000000000000..fb4920397d08
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml
@@ -0,0 +1,384 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# %YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/rockchip,rk3399-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3399 DMC (Dynamic Memory Controller) device
+
+maintainers:
+  - Brian Norris <briannorris@chromium.org>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3399-dmc
+
+  devfreq-events:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Node to get DDR loading. Refer to
+      Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dmc_clk
+
+  operating-points-v2: true
+
+  center-supply:
+    description:
+      DMC regulator supply.
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "PMU general register files".
+
+  interrupts:
+    maxItems: 1
+    description:
+      The CPU interrupt number. It should be a DCF interrupt. When DDR DVFS
+      finishes, a DCF interrupt is triggered.
+
+  rockchip,ddr3_speed_bin:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      For values, reference include/dt-bindings/clock/rk3399-ddr.h. Selects the
+      DDR3 cl-trp-trcd type. It must be set according to "Speed Bin" in DDR3
+      datasheet; DO NOT use a smaller "Speed Bin" than specified for the DDR3
+      being used.
+
+  rockchip,pd_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Configure the PD_IDLE value. Defines the power-down idle period in which
+      memories are placed into power-down mode if bus is idle for PD_IDLE DFI
+      clock cycles.
+      See also rockchip,pd-idle-ns.
+
+  rockchip,sr_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Configure the SR_IDLE value. Defines the self-refresh idle period in
+      which memories are placed into self-refresh mode if bus is idle for
+      SR_IDLE * 1024 DFI clock cycles (DFI clocks freq is half of DRAM clock).
+      See also rockchip,sr-idle-ns.
+    default: 0
+
+  rockchip,sr_mc_gate_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the memory self-refresh and controller clock gating idle period.
+      Memories are placed into self-refresh mode and memory controller clock
+      arg gating started if bus is idle for sr_mc_gate_idle*1024 DFI clock
+      cycles.
+      See also rockchip,sr-mc-gate-idle-ns.
+
+  rockchip,srpd_lite_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the self-refresh power down idle period in which memories are
+      placed into self-refresh power down mode if bus is idle for
+      srpd_lite_idle * 1024 DFI clock cycles. This parameter is for LPDDR4
+      only.
+      See also rockchip,srpd-lite-idle-ns.
+
+  rockchip,standby_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the standby idle period in which memories are placed into
+      self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
+      if bus is idle for standby_idle * DFI clock cycles.
+      See also rockchip,standby-idle-ns.
+
+  rockchip,dram_dll_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Defines the DDR3 DLL bypass frequency in MHz. When DDR frequency is less
+      than DRAM_DLL_DISB_FREQ, DDR3 DLL will be bypassed.
+      Note: if DLL was bypassed, the odt will also stop working.
+
+  rockchip,phy_dll_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Defines the PHY dll bypass frequency in MHz (Mega Hz). When DDR frequency
+      is less than DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
+      Note: PHY DLL and PHY ODT are independent.
+
+  rockchip,auto_pd_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the auto PD disable frequency in MHz.
+
+  rockchip,ddr3_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is DDR3, this parameter defines the ODT disable
+      frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
+      the ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,ddr3_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 40
+
+  rockchip,ddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the DRAM side ODT
+      strength in ohms.
+    default: 120
+
+  rockchip,phy_ddr3_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the phy side CA line
+      (incluing command line, address line and clock line) drive strength.
+    default: 40
+
+  rockchip,phy_ddr3_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 40
+
+  rockchip,phy_ddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the PHY side ODT
+      strength.
+    default: 240
+
+  rockchip,lpddr3_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is LPDDR3, this parameter defines then ODT disable
+      frequency in Hz. When DDR frequency is less then ddr3_odt_dis_freq, the
+      ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,lpddr3_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 34
+
+  rockchip,lpddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT
+      strength in ohms.
+    default: 240
+
+  rockchip,phy_lpddr3_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the PHY side CA line
+      (including command line, address line and clock line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr3_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When dram type is LPDDR3, this parameter define the phy side odt
+      strength, default value is 240.
+
+  rockchip,lpddr4_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the ODT disable
+      frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
+      the ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,lpddr4_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 60
+
+  rockchip,lpddr4_dq_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
+      DQS/DQ line strength in ohms.
+    default: 40
+
+  rockchip,lpddr4_ca_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
+      CA line strength in ohms.
+    default: 40
+
+  rockchip,phy_lpddr4_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side CA line
+      (including command address line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr4_ck_cs_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side clock
+      line and CS line drive strength.
+    default: 80
+
+  rockchip,phy_lpddr4_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 80
+
+  rockchip,phy_lpddr4_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side ODT
+      strength.
+    default: 60
+
+  rockchip,pd-idle-ns:
+    description:
+      Configure the PD_IDLE value in nanoseconds. Defines the power-down idle
+      period in which memories are placed into power-down mode if bus is idle
+      for PD_IDLE nanoseconds.
+
+  rockchip,sr-idle-ns:
+    description:
+      Configure the SR_IDLE value in nanoseconds. Defines the self-refresh idle
+      period in which memories are placed into self-refresh mode if bus is idle
+      for SR_IDLE nanoseconds.
+    default: 0
+
+  rockchip,sr-mc-gate-idle-ns:
+    description:
+      Defines the memory self-refresh and controller clock gating idle period in nanoseconds.
+      Memories are placed into self-refresh mode and memory controller clock
+      arg gating started if bus is idle for sr_mc_gate_idle nanoseconds.
+
+  rockchip,srpd-lite-idle-ns:
+    description:
+      Defines the self-refresh power down idle period in which memories are
+      placed into self-refresh power down mode if bus is idle for
+      srpd_lite_idle nanoseonds. This parameter is for LPDDR4 only.
+
+  rockchip,standby-idle-ns:
+    description:
+      Defines the standby idle period in which memories are placed into
+      self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
+      if bus is idle for standby_idle nanoseconds.
+
+  rockchip,pd-idle-dis-freq-hz:
+    description:
+      Defines the power-down idle disable frequency in Hz. When the DDR
+      frequency is greater than pd-idle-dis-freq, power-down idle is disabled.
+      See also rockchip,pd-idle-ns.
+
+  rockchip,sr-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh idle disable frequency in Hz. When the DDR
+      frequency is greater than sr-idle-dis-freq, self-refresh idle is
+      disabled. See also rockchip,sr-idle-ns.
+
+  rockchip,sr-mc-gate-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh and memory-controller clock gating disable
+      frequency in Hz. When the DDR frequency is greater than
+      sr-mc-gate-idle-dis-freq, the clock will not be gated when idle. See also
+      rockchip,sr-mc-gate-idle-ns.
+
+  rockchip,srpd-lite-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh power down idle disable frequency in Hz. When
+      the DDR frequency is greater than srpd-lite-idle-dis-freq, memory will
+      not be placed into self-refresh power down mode when idle. See also
+      rockchip,srpd-lite-idle-ns.
+
+  rockchip,standby-idle-dis-freq-hz:
+    description:
+      Defines the standby idle disable frequency in Hz. When the DDR frequency
+      is greater than standby-idle-dis-freq, standby idle is disabled. See also
+      rockchip,standby-idle-ns.
+
+required:
+  - compatible
+  - devfreq-events
+  - clocks
+  - clock-names
+  - operating-points-v2
+  - center-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    memory-controller {
+      compatible = "rockchip,rk3399-dmc";
+      devfreq-events = <&dfi>;
+      rockchip,pmu = <&pmu>;
+      interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_DDRC>;
+      clock-names = "dmc_clk";
+      operating-points-v2 = <&dmc_opp_table>;
+      center-supply = <&ppvar_centerlogic>;
+      rockchip,pd-idle-ns = <160>;
+      rockchip,sr-idle-ns = <10240>;
+      rockchip,sr-mc-gate-idle-ns = <40960>;
+      rockchip,srpd-lite-idle-ns = <61440>;
+      rockchip,standby-idle-ns = <81920>;
+      rockchip,ddr3_odt_dis_freq = <333000000>;
+      rockchip,lpddr3_odt_dis_freq = <333000000>;
+      rockchip,lpddr4_odt_dis_freq = <333000000>;
+      rockchip,pd-idle-dis-freq-hz = <1000000000>;
+      rockchip,sr-idle-dis-freq-hz = <1000000000>;
+      rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>;
+      rockchip,srpd-lite-idle-dis-freq-hz = <0>;
+      rockchip,standby-idle-dis-freq-hz = <928000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
new file mode 100644
index 000000000000..098348b2b815
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/samsung,exynos5422-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: |
+  Samsung Exynos5422 SoC frequency and voltage scaling for Dynamic Memory
+  Controller device
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Lukasz Luba <lukasz.luba@arm.com>
+
+description: |
+  The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the
+  DRAM memory chips are connected. The driver is to monitor the controller in
+  runtime and switch frequency and voltage. To monitor the usage of the
+  controller in runtime, the driver uses the PPMU (Platform Performance
+  Monitoring Unit), which is able to measure the current load of the memory.
+  When 'userspace' governor is used for the driver, an application is able to
+  switch the DMC and memory frequency.
+
+properties:
+  compatible:
+    items:
+      - const: samsung,exynos5422-dmc
+
+  clock-names:
+    items:
+      - const: fout_spll
+      - const: mout_sclk_spll
+      - const: ff_dout_spll2
+      - const: fout_bpll
+      - const: mout_bpll
+      - const: sclk_bpll
+      - const: mout_mx_mspll_ccore
+      - const: mout_mclk_cdrex
+
+  clocks:
+    minItems: 8
+    maxItems: 8
+
+  devfreq-events:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    minItems: 1
+    maxItems: 16
+    items:
+      maxItems: 1
+    description: phandles of the PPMU events used by the controller.
+
+  device-handle:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: |
+      phandle of the connected DRAM memory device. For more information please
+      refer to jedec,lpddr3.yaml.
+
+  operating-points-v2: true
+
+  interrupts:
+    items:
+      - description: DMC internal performance event counters in DREX0
+      - description: DMC internal performance event counters in DREX1
+
+  interrupt-names:
+    items:
+      - const: drex_0
+      - const: drex_1
+
+  reg:
+    items:
+      - description: registers of DREX0
+      - description: registers of DREX1
+
+  samsung,syscon-clk:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: |
+      Phandle of the clock register set used by the controller, these registers
+      are used for enabling a 'pause' feature and are not exposed by clock
+      framework but they must be used in a safe way.  The register offsets are
+      in the driver code and specyfic for this SoC type.
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - devfreq-events
+  - device-handle
+  - reg
+  - samsung,syscon-clk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    ppmu_dmc0_0: ppmu@10d00000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x10d00000 0x2000>;
+        clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
+        clock-names = "ppmu";
+        events {
+            ppmu_event_dmc0_0: ppmu-event3-dmc0-0 {
+                event-name = "ppmu-event3-dmc0_0";
+            };
+        };
+    };
+
+    memory-controller@10c20000 {
+        compatible = "samsung,exynos5422-dmc";
+        reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
+        clocks = <&clock CLK_FOUT_SPLL>,
+                 <&clock CLK_MOUT_SCLK_SPLL>,
+                 <&clock CLK_FF_DOUT_SPLL2>,
+                 <&clock CLK_FOUT_BPLL>,
+                 <&clock CLK_MOUT_BPLL>,
+                 <&clock CLK_SCLK_BPLL>,
+                 <&clock CLK_MOUT_MX_MSPLL_CCORE>,
+                 <&clock CLK_MOUT_MCLK_CDREX>;
+        clock-names = "fout_spll",
+                      "mout_sclk_spll",
+                      "ff_dout_spll2",
+                      "fout_bpll",
+                      "mout_bpll",
+                      "sclk_bpll",
+                      "mout_mx_mspll_ccore",
+                      "mout_mclk_cdrex";
+        operating-points-v2 = <&dmc_opp_table>;
+        devfreq-events = <&ppmu_event3_dmc0_0>,	<&ppmu_event3_dmc0_1>,
+                         <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
+        device-handle = <&samsung_K3QF2F20DB>;
+        vdd-supply = <&buck1_reg>;
+        samsung,syscon-clk = <&clock>;
+        interrupt-parent = <&combiner>;
+        interrupts = <16 0>, <16 1>;
+        interrupt-names = "drex_0", "drex_1";
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
new file mode 100644
index 000000000000..e68c4306025a
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/snps,dw-umctl2-ddrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Universal Multi-Protocol Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Manish Narani <manish.narani@xilinx.com>
+  - Michal Simek <michal.simek@xilinx.com>
+
+description: |
+  Synopsys DesignWare Enhanced uMCTL2 DDR Memory Controller is capable of
+  working with the memory devices supporting up to (LP)DDR4 protocol. It can
+  be equipped with SEC/DEC ECC feature if DRAM data bus width is either
+  16-bits or 32-bits or 64-bits wide.
+
+  For instance the ZynqMP DDR controller is based on the DW uMCTL2 v2.40a
+  controller. It has an optional SEC/DEC ECC support in 64- and 32-bits
+  bus width configurations.
+
+properties:
+  compatible:
+    oneOf:
+      - deprecated: true
+        description: Synopsys DW uMCTL2 DDR controller v3.80a
+        const: snps,ddrc-3.80a
+      - description: Synopsys DW uMCTL2 DDR controller
+        const: snps,dw-umctl2-ddrc
+      - description: Xilinx ZynqMP DDR controller v2.40a
+        const: xlnx,zynqmp-ddrc-2.40a
+
+  interrupts:
+    description:
+      DW uMCTL2 DDRC IP-core provides individual IRQ signal for each event":"
+      ECC Corrected Error, ECC Uncorrected Error, ECC Address Protection,
+      Scrubber-Done signal, DFI Parity/CRC Error. Some platforms may have the
+      signals merged before they reach the IRQ controller or have some of them
+      absent in case if the corresponding feature is unavailable/disabled.
+    minItems: 1
+    maxItems: 5
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 5
+    oneOf:
+      - description: Common ECC CE/UE/Scrubber/DFI Errors IRQ
+        items:
+          - const: ecc
+      - description: Individual ECC CE/UE/Scrubber/DFI Errors IRQs
+        items:
+          enum: [ ecc_ce, ecc_ue, ecc_ap, ecc_sbr, dfi_e ]
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      A standard set of the clock sources contains CSRs bus clock, AXI-ports
+      reference clock, DDRC core clock, Scrubber standalone clock
+      (synchronous to the DDRC clock).
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [ pclk, aclk, core, sbr ]
+
+  resets:
+    description:
+      Each clock domain can have separate reset signal.
+    minItems: 1
+    maxItems: 4
+
+  reset-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [ prst, arst, core, sbr ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    memory-controller@fd070000 {
+      compatible = "xlnx,zynqmp-ddrc-2.40a";
+      reg = <0xfd070000 0x30000>;
+
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "ecc";
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    memory-controller@3d400000 {
+      compatible = "snps,dw-umctl2-ddrc";
+      reg = <0x3d400000 0x400000>;
+
+      interrupts = <147 IRQ_TYPE_LEVEL_HIGH>, <148 IRQ_TYPE_LEVEL_HIGH>,
+                   <149 IRQ_TYPE_LEVEL_HIGH>, <150 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "ecc_ce", "ecc_ue", "ecc_sbr", "dfi_e";
+
+      clocks = <&pclk>, <&aclk>, <&core_clk>, <&sbr_clk>;
+      clock-names = "pclk", "aclk", "core", "sbr";
+    };
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
new file mode 100644
index 000000000000..6b516d3895af
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -0,0 +1,254 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
+
+description: |
+  The FMC2 functional block makes the interface with: synchronous and
+  asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
+  peripherals) and NAND flash memories.
+  Its main purposes are:
+    - to translate AXI transactions into the appropriate external device
+      protocol
+    - to meet the access time requirements of the external devices
+  All external devices share the addresses, data and control signals with the
+  controller. Each external device is accessed by means of a unique Chip
+  Select. The FMC2 performs only one access at a time to an external device.
+
+maintainers:
+  - Christophe Kerello <christophe.kerello@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp1-fmc2-ebi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description: |
+      Reflects the memory layout with four integer values per bank. Format:
+      <bank-number> 0 <address of the bank> <size>
+
+patternProperties:
+  "^.*@[0-4],[a-f0-9]+$":
+    type: object
+
+    properties:
+      reg:
+        description: Bank number, base address and size of the device.
+
+      st,fmc2-ebi-cs-transaction-type:
+        description: |
+          Select one of the transactions type supported
+          0: Asynchronous mode 1 SRAM/FRAM.
+          1: Asynchronous mode 1 PSRAM.
+          2: Asynchronous mode A SRAM/FRAM.
+          3: Asynchronous mode A PSRAM.
+          4: Asynchronous mode 2 NOR.
+          5: Asynchronous mode B NOR.
+          6: Asynchronous mode C NOR.
+          7: Asynchronous mode D NOR.
+          8: Synchronous read synchronous write PSRAM.
+          9: Synchronous read asynchronous write PSRAM.
+          10: Synchronous read synchronous write NOR.
+          11: Synchronous read asynchronous write NOR.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 11
+
+      st,fmc2-ebi-cs-cclk-enable:
+        description: Continuous clock enable (first bank must be configured
+          in synchronous mode). The FMC_CLK is generated continuously
+          during asynchronous and synchronous access. By default, the
+          FMC_CLK is only generated during synchronous access.
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      st,fmc2-ebi-cs-mux-enable:
+        description: Address/Data multiplexed on databus (valid only with
+          NOR and PSRAM transactions type). By default, Address/Data
+          are not multiplexed.
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      st,fmc2-ebi-cs-buswidth:
+        description: Data bus width
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 8, 16 ]
+        default: 16
+
+      st,fmc2-ebi-cs-waitpol-high:
+        description: Wait signal polarity (NWAIT signal active high).
+          By default, NWAIT is active low.
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      st,fmc2-ebi-cs-waitcfg-enable:
+        description: The NWAIT signal indicates wheither the data from the
+          device are valid or if a wait state must be inserted when accessing
+          the device in synchronous mode. By default, the NWAIT signal is
+          active one data cycle before wait state.
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      st,fmc2-ebi-cs-wait-enable:
+        description: The NWAIT signal is enabled (its level is taken into
+          account after the programmed latency period to insert wait states
+          if asserted). By default, the NWAIT signal is disabled.
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      st,fmc2-ebi-cs-asyncwait-enable:
+        description: The NWAIT signal is taken into account during asynchronous
+          transactions. By default, the NWAIT signal is not taken into account
+          during asynchronous transactions.
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      st,fmc2-ebi-cs-cpsize:
+        description: CRAM page size. The controller splits the burst access
+          when the memory page is reached. By default, no burst split when
+          crossing page boundary.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 128, 256, 512, 1024 ]
+        default: 0
+
+      st,fmc2-ebi-cs-byte-lane-setup-ns:
+        description: This property configures the byte lane setup timing
+          defined in nanoseconds from NBLx low to Chip Select NEx low.
+
+      st,fmc2-ebi-cs-address-setup-ns:
+        description: This property defines the duration of the address setup
+          phase in nanoseconds used for asynchronous read/write transactions.
+
+      st,fmc2-ebi-cs-address-hold-ns:
+        description: This property defines the duration of the address hold
+          phase in nanoseconds used for asynchronous multiplexed read/write
+          transactions.
+
+      st,fmc2-ebi-cs-data-setup-ns:
+        description: This property defines the duration of the data setup phase
+          in nanoseconds used for asynchronous read/write transactions.
+
+      st,fmc2-ebi-cs-bus-turnaround-ns:
+        description: This property defines the delay in nanoseconds between the
+          end of current read/write transaction and the next transaction.
+
+      st,fmc2-ebi-cs-data-hold-ns:
+        description: This property defines the duration of the data hold phase
+          in nanoseconds used for asynchronous read/write transactions.
+
+      st,fmc2-ebi-cs-clk-period-ns:
+        description: This property defines the FMC_CLK output signal period in
+          nanoseconds.
+
+      st,fmc2-ebi-cs-data-latency-ns:
+        description: This property defines the data latency before reading or
+          writing the first data in nanoseconds.
+
+      st,fmc2_ebi-cs-write-address-setup-ns:
+        description: This property defines the duration of the address setup
+          phase in nanoseconds used for asynchronous write transactions.
+
+      st,fmc2-ebi-cs-write-address-hold-ns:
+        description: This property defines the duration of the address hold
+          phase in nanoseconds used for asynchronous multiplexed write
+          transactions.
+
+      st,fmc2-ebi-cs-write-data-setup-ns:
+        description: This property defines the duration of the data setup
+          phase in nanoseconds used for asynchronous write transactions.
+
+      st,fmc2-ebi-cs-write-bus-turnaround-ns:
+        description: This property defines the delay between the end of current
+          write transaction and the next transaction in nanoseconds.
+
+      st,fmc2-ebi-cs-write-data-hold-ns:
+        description: This property defines the duration of the data hold phase
+          in nanoseconds used for asynchronous write transactions.
+
+      st,fmc2-ebi-cs-max-low-pulse-ns:
+        description: This property defines the maximum chip select low pulse
+          duration in nanoseconds for synchronous transactions. When this timing
+          reaches 0, the controller splits the current access, toggles NE to
+          allow device refresh and restarts a new access.
+
+    required:
+      - reg
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - clocks
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    memory-controller@58002000 {
+      #address-cells = <2>;
+      #size-cells = <1>;
+      compatible = "st,stm32mp1-fmc2-ebi";
+      reg = <0x58002000 0x1000>;
+      clocks = <&rcc FMC_K>;
+      resets = <&rcc FMC_R>;
+
+      ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+               <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+               <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+               <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+               <4 0 0x80000000 0x10000000>; /* NAND */
+
+      psram@0,0 {
+        compatible = "mtd-ram";
+        reg = <0 0x00000000 0x100000>;
+        bank-width = <2>;
+
+        st,fmc2-ebi-cs-transaction-type = <1>;
+        st,fmc2-ebi-cs-address-setup-ns = <60>;
+        st,fmc2-ebi-cs-data-setup-ns = <30>;
+        st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
+      };
+
+      nand-controller@4,0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "st,stm32mp1-fmc2-nfc";
+        reg = <4 0x00000000 0x1000>,
+              <4 0x08010000 0x1000>,
+              <4 0x08020000 0x1000>,
+              <4 0x01000000 0x1000>,
+              <4 0x09010000 0x1000>,
+              <4 0x09020000 0x1000>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+               <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+               <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+        dma-names = "tx", "rx", "ecc";
+
+        nand@0 {
+          reg = <0>;
+          nand-on-flash-bbt;
+          #address-cells = <1>;
+          #size-cells = <1>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
deleted file mode 100644
index 9d32762c47e1..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
-
-The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and 32-bit
-bus width configurations.
-
-The Zynq DDR ECC controller has an optional ECC support in half-bus width
-(16-bit) configuration.
-
-These both ECC controllers correct single bit ECC errors and detect double bit
-ECC errors.
-
-Required properties:
- - compatible: One of:
-	- 'xlnx,zynq-ddrc-a05' : Zynq DDR ECC controller
-	- 'xlnx,zynqmp-ddrc-2.40a' : ZynqMP DDR ECC controller
- - reg: Should contain DDR controller registers location and length.
-
-Required properties for "xlnx,zynqmp-ddrc-2.40a":
- - interrupts: Property with a value describing the interrupt number.
-
-Example:
-	memory-controller@f8006000 {
-		compatible = "xlnx,zynq-ddrc-a05";
-		reg = <0xf8006000 0x1000>;
-	};
-
-	mc: memory-controller@fd070000 {
-		compatible = "xlnx,zynqmp-ddrc-2.40a";
-		reg = <0x0 0xfd070000 0x0 0x30000>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 112 4>;
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml
new file mode 100644
index 000000000000..382ddab60fbd
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ti,da8xx-ddrctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments da8xx DDR2/mDDR memory controller
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  Documentation:
+    OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf
+
+properties:
+  compatible:
+    const: ti,da850-ddr-controller
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@b0000000 {
+        compatible = "ti,da850-ddr-controller";
+        reg = <0xb0000000 0xe8>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml
new file mode 100644
index 000000000000..6e3995bb1630
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml
@@ -0,0 +1,245 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: device tree bindings for children of the Texas Instruments GPMC
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  This binding is meant for the child nodes of the GPMC node. The node
+  represents any device connected to the GPMC bus. It may be a Flash chip,
+  RAM chip or Ethernet controller, etc. These properties are meant for
+  configuring the GPMC settings/timings and will accompany the bindings
+  supported by the respective device.
+
+properties:
+  reg: true
+
+# GPMC Timing properties for child nodes. All are optional and default to 0.
+  gpmc,sync-clk-ps:
+    description: Minimum clock period for synchronous mode
+    default: 0
+
+# Chip-select signal timings corresponding to GPMC_CONFIG2:
+  gpmc,cs-on-ns:
+    description: Assertion time
+    default: 0
+
+  gpmc,cs-rd-off-ns:
+    description: Read deassertion time
+    default: 0
+
+  gpmc,cs-wr-off-ns:
+    description: Write deassertion time
+    default: 0
+
+# ADV signal timings corresponding to GPMC_CONFIG3:
+  gpmc,adv-on-ns:
+    description: Assertion time
+    default: 0
+
+  gpmc,adv-rd-off-ns:
+    description: Read deassertion time
+    default: 0
+
+  gpmc,adv-wr-off-ns:
+    description: Write deassertion time
+    default: 0
+
+  gpmc,adv-aad-mux-on-ns:
+    description: Assertion time for AAD
+    default: 0
+
+  gpmc,adv-aad-mux-rd-off-ns:
+    description: Read deassertion time for AAD
+    default: 0
+
+  gpmc,adv-aad-mux-wr-off-ns:
+    description: Write deassertion time for AAD
+    default: 0
+
+# WE signals timings corresponding to GPMC_CONFIG4:
+  gpmc,we-on-ns:
+    description: Assertion time
+    default: 0
+
+  gpmc,we-off-ns:
+    description: Deassertion time
+    default: 0
+
+# OE signals timings corresponding to GPMC_CONFIG4:
+  gpmc,oe-on-ns:
+    description: Assertion time
+    default: 0
+
+  gpmc,oe-off-ns:
+    description: Deassertion time
+    default: 0
+
+  gpmc,oe-aad-mux-on-ns:
+    description: Assertion time for AAD
+    default: 0
+
+  gpmc,oe-aad-mux-off-ns:
+    description: Deassertion time for AAD
+    default: 0
+
+# Access time and cycle time timings (in nanoseconds) corresponding to
+# GPMC_CONFIG5:
+  gpmc,page-burst-access-ns:
+    description: Multiple access word delay
+    default: 0
+
+  gpmc,access-ns:
+    description: Start-cycle to first data valid delay
+    default: 0
+
+  gpmc,rd-cycle-ns:
+    description: Total read cycle time
+    default: 0
+
+  gpmc,wr-cycle-ns:
+    description: Total write cycle time
+    default: 0
+
+  gpmc,bus-turnaround-ns:
+    description: Turn-around time between successive accesses
+    default: 0
+
+  gpmc,cycle2cycle-delay-ns:
+    description: Delay between chip-select pulses
+    default: 0
+
+  gpmc,clk-activation-ns:
+    description: GPMC clock activation time
+    default: 0
+
+  gpmc,wait-monitoring-ns:
+    description: Start of wait monitoring with regard to valid data
+    default: 0
+
+# Boolean timing parameters. If property is present, parameter is enabled
+# otherwise disabled.
+  gpmc,adv-extra-delay:
+    description: ADV signal is delayed by half GPMC clock
+    type: boolean
+
+  gpmc,cs-extra-delay:
+    description: CS signal is delayed by half GPMC clock
+    type: boolean
+
+  gpmc,cycle2cycle-diffcsen:
+    description: |
+      Add "cycle2cycle-delay" between successive accesses
+      to a different CS
+    type: boolean
+
+  gpmc,cycle2cycle-samecsen:
+    description: |
+      Add "cycle2cycle-delay" between successive accesses
+      to the same CS
+    type: boolean
+
+  gpmc,oe-extra-delay:
+    description: OE signal is delayed by half GPMC clock
+    type: boolean
+
+  gpmc,we-extra-delay:
+    description: WE signal is delayed by half GPMC clock
+    type: boolean
+
+  gpmc,time-para-granularity:
+    description: Multiply all access times by 2
+    type: boolean
+
+# The following two properties are applicable only to OMAP3+ and AM335x:
+  gpmc,wr-access-ns:
+    description: |
+      In synchronous write mode, for single or
+      burst accesses, defines the number of
+      GPMC_FCLK cycles from start access time
+      to the GPMC_CLK rising edge used by the
+      memory device for the first data capture.
+    default: 0
+
+  gpmc,wr-data-mux-bus-ns:
+    description: |
+      In address-data multiplex mode, specifies
+      the time when the first data is driven on
+      the address-data bus.
+    default: 0
+
+# GPMC chip-select settings properties for child nodes. All are optional.
+  gpmc,burst-length:
+    description: Page/burst length.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 4, 8, 16]
+    default: 0
+
+  gpmc,burst-wrap:
+    description: Enables wrap bursting
+    type: boolean
+
+  gpmc,burst-read:
+    description: Enables read page/burst mode
+    type: boolean
+
+  gpmc,burst-write:
+    description: Enables write page/burst mode
+    type: boolean
+
+  gpmc,device-width:
+    description: |
+      Total width of device(s) connected to a GPMC
+      chip-select in bytes. The GPMC supports 8-bit
+      and 16-bit devices and so this property must be
+      1 or 2.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    default: 1
+
+  gpmc,mux-add-data:
+    description: |
+      Address and data multiplexing configuration.
+      Valid values are
+      0 for Non multiplexed mode
+      1 for address-address-data multiplexing mode and
+      2 for address-data multiplexing mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  gpmc,sync-read:
+    description: |
+      Enables synchronous read. Defaults to asynchronous
+      is this is not set.
+    type: boolean
+
+  gpmc,sync-write:
+    description: |
+      Enables synchronous writes. Defaults to asynchronous
+      is this is not set.
+    type: boolean
+
+  gpmc,wait-pin:
+    description: |
+      Wait-pin used by client. Must be less than "gpmc,num-waitpins".
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  gpmc,wait-on-read:
+    description: Enables wait monitoring on reads.
+    type: boolean
+
+  gpmc,wait-on-write:
+    description: Enables wait monitoring on writes.
+    type: boolean
+
+required:
+  - reg
+
+# the GPMC child will have its own native properties
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
new file mode 100644
index 000000000000..e188a4bf755c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments GPMC Memory Controller device-tree bindings
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  The GPMC is a unified memory controller dedicated for interfacing
+  with external memory devices like
+  - Asynchronous SRAM-like memories and ASICs
+  - Asynchronous, synchronous, and page mode burst NOR flash
+  - NAND flash
+  - Pseudo-SRAM devices
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,am3352-gpmc
+          - ti,am64-gpmc
+          - ti,omap2420-gpmc
+          - ti,omap2430-gpmc
+          - ti,omap3430-gpmc
+          - ti,omap4430-gpmc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: data
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: |
+      Functional clock. Used for bus timing calculations and
+      GPMC configuration.
+
+  clock-names:
+    items:
+      - const: fck
+
+  power-domains:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: DMA channel for GPMC NAND prefetch
+
+  dma-names:
+    items:
+      - const: rxtx
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  gpmc,num-cs:
+    description: maximum number of supported chip-select lines.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  gpmc,num-waitpins:
+    description: maximum number of supported wait pins.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ranges:
+    minItems: 1
+    description: |
+      Must be set up to reflect the memory layout with four
+      integer values for each chip-select line in use,
+      <cs-number> 0 <physical address of mapping> <size>
+    items:
+      - description: NAND bank 0
+      - description: NOR/SRAM bank 0
+      - description: NOR/SRAM bank 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller:
+    description: |
+      The GPMC driver implements and interrupt controller for
+      the NAND events "fifoevent" and "termcount" plus the
+      rising/falling edges on the GPMC_WAIT pins.
+      The interrupt number mapping is as follows
+      0 - NAND_fifoevent
+      1 - NAND_termcount
+      2 - GPMC_WAIT0 pin edge
+      3 - GPMC_WAIT1 pin edge, and so on.
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller:
+    description: |
+      The GPMC driver implements a GPIO controller for the
+      GPMC WAIT pins that can be used as general purpose inputs.
+      0 maps to GPMC_WAIT0 pin.
+
+  ti,hwmods:
+    description:
+      Name of the HWMOD associated with GPMC. This is for legacy
+      omap2/3 platforms only.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+  ti,no-idle-on-init:
+    description:
+      Prevent idling the module at init. This is for legacy omap2/3
+      platforms only.
+    type: boolean
+    deprecated: true
+
+patternProperties:
+  "@[0-7],[a-f0-9]+$":
+    type: object
+    description: |
+      The child device node represents the device connected to the GPMC
+      bus. The device can be a NAND chip, SRAM device, NOR device
+      or an ASIC.
+    $ref: "ti,gpmc-child.yaml"
+
+
+required:
+  - compatible
+  - reg
+  - gpmc,num-cs
+  - gpmc,num-waitpins
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am64-gpmc
+    then:
+      required:
+        - reg-names
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpmc: memory-controller@50000000 {
+      compatible = "ti,am3352-gpmc";
+      reg = <0x50000000 0x2000>;
+      interrupts = <100>;
+      clocks = <&l3s_clkctrl>;
+      clock-names = "fck";
+      dmas = <&edma 52 0>;
+      dma-names = "rxtx";
+      gpmc,num-cs = <8>;
+      gpmc,num-waitpins = <2>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      gpio-controller;
+      #gpio-cells = <2>;
+
+      nand@0,0 {
+        compatible = "ti,omap2-nand";
+        reg = <0 0 4>;
+        interrupt-parent = <&gpmc>;
+        interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+                     <1 IRQ_TYPE_NONE>; /* termcount */
+        ti,nand-xfer-type = "prefetch-dma";
+        ti,nand-ecc-opt = "bch16";
+        ti,elm-id = <&elm>;
+        rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt b/Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt
deleted file mode 100644
index ec1dd408d573..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Device tree bindings for Texas Instruments da8xx DDR2/mDDR memory controller
-
-The DDR2/mDDR memory controller present on Texas Instruments da8xx SoCs features
-a set of registers which allow to tweak the controller's behavior.
-
-Documentation:
-OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf
-
-Required properties:
-
-- compatible:		"ti,da850-ddr-controller" - for da850 SoC based boards
-- reg:			a tuple containing the base address of the memory
-			controller and the size of the memory area to map
-
-Example for da850 shown below.
-
-ddrctl {
-	compatible = "ti,da850-ddr-controller";
-	reg = <0xb0000000 0xe8>;
-};
diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
new file mode 100644
index 000000000000..8f72e2f8588a
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,zynq-ddrc-a05.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq A05 DDR Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Manish Narani <manish.narani@xilinx.com>
+  - Michal Simek <michal.simek@xilinx.com>
+
+description:
+  The Zynq DDR ECC controller has an optional ECC support in half-bus width
+  (16-bit) configuration. It is cappable of correcting single bit ECC errors
+  and detecting double bit ECC errors.
+
+properties:
+  compatible:
+    const: xlnx,zynq-ddrc-a05
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@f8006000 {
+      compatible = "xlnx,zynq-ddrc-a05";
+      reg = <0xf8006000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
deleted file mode 100644
index 5c6eabeed341..000000000000
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ /dev/null
@@ -1,280 +0,0 @@
-* AB8500 Multi-Functional Device (MFD)
-
-Required parent device properties:
-- compatible             : contains "stericsson,ab8500" or "stericsson,ab8505";
-- interrupts             : contains the IRQ line for the AB8500
-- interrupt-controller   : describes the AB8500 as an Interrupt Controller (has its own domain)
-- #interrupt-cells       : should be 2, for 2-cell format
-                            - The first cell is the AB8500 local IRQ number
-                            - The second cell is used to specify optional parameters
-                              - bits[3:0] trigger type and level flags:
-                                  1 = low-to-high edge triggered
-                                  2 = high-to-low edge triggered
-                                  4 = active high level-sensitive
-                                  8 = active low level-sensitive
-
-The AB8500 consists of a large and varied group of sub-devices:
-
-Device                     IRQ Names              Supply Names   Description
-------                     ---------              ------------   -----------
-ab8500-bm                :                      :              : Battery Manager
-ab8500-btemp             :                      :              : Battery Temperature
-ab8500-charger           :                      :              : Battery Charger
-ab8500-codec             :                      :              : Audio Codec
-ab8500-fg                : 			: vddadc       : Fuel Gauge
-			 : NCONV_ACCU           :	       : Accumulate N Sample Conversion
-			 : BATT_OVV		:	       : Battery Over Voltage
-			 : LOW_BAT_F		:	       : LOW threshold battery voltage
-			 : CC_INT_CALIB		:	       : Coulomb Counter Internal Calibration
-			 : CCEOC		:	       : Coulomb Counter End of Conversion
-ab8500-btemp		 :			: vtvout       : Battery Temperature
-			 : BAT_CTRL_INDB        :              : Battery Removal Indicator
-			 : BTEMP_LOW            :              : Btemp < BtempLow, if battery temperature is lower than -10°C
-			 : BTEMP_LOW_MEDIUM     :              : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
-			 : BTEMP_MEDIUM_HIGH    :	       : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
-			 : BTEMP_HIGH           :              : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp
-ab8500-charger		 :			: vddadc       : Charger interface
-			 : MAIN_CH_UNPLUG_DET	:	       : main charger unplug detection management (not in 8505)
-			 : MAIN_CHARGE_PLUG_DET	:	       : main charger plug detection management (not in 8505)
-			 : MAIN_EXT_CH_NOT_OK	:	       : main charger not OK
-			 : MAIN_CH_TH_PROT_R	:	       : Die temp is above main charger
-			 : MAIN_CH_TH_PROT_F	:	       : Die temp is below main charger
-			 : VBUS_DET_F		:	       : VBUS falling detected
-			 : VBUS_DET_R		:	       : VBUS rising detected
-			 : USB_LINK_STATUS	:	       : USB link status has changed
-			 : USB_CH_TH_PROT_R	:	       : Die temp is above usb charger
-			 : USB_CH_TH_PROT_F	:	       : Die temp is below usb charger
-			 : USB_CHARGER_NOT_OKR	:	       : allowed USB charger not ok detection
-			 : VBUS_OVV		:	       : Overvoltage on Vbus ball detected (USB charge is stopped)
-			 : CH_WD_EXP		:	       : Charger watchdog detected
-ab8500-gpadc             : HW_CONV_END          : vddadc       : Analogue to Digital Converter
-                           SW_CONV_END          :              :
-ab8500-gpio              :                      :              : GPIO Controller (AB8500)
-ab8505-gpio              :                      :              : GPIO Controller (AB8505)
-ab8500-ponkey            : ONKEY_DBF            :              : Power-on Key
-                           ONKEY_DBR            :              :
-ab8500-pwm               :                      :              : Pulse Width Modulator
-ab8500-regulator         :                      :              : Regulators (AB8500)
-ab8505-regulator         :                      :              : Regulators (AB8505)
-ab8500-rtc               : 60S                  :              : Real Time Clock
-                         : ALARM                :              :
-ab8500-sysctrl           :                      :              : System Control
-ab8500-usb               : ID_WAKEUP_R          : vddulpivio18 : Universal Serial Bus
-                         : ID_WAKEUP_F          : v-ape        :
-                         : VBUS_DET_F           : musb_1v8     :
-                         : VBUS_DET_R           :              :
-                         : USB_LINK_STATUS      :              :
-                         : USB_ADP_PROBE_PLUG   :              :
-                         : USB_ADP_PROBE_UNPLUG :              :
-
-Required child device properties:
-- compatible             : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey|
-                                               pwm|regulator|rtc|sysctrl|usb]";
-
-  A few child devices require ADC channels from the GPADC node. Those follow the
-  standard bindings from iio/iio-bindings.txt and iio/adc/adc.txt
-
-  abx500-temp		 : io-channels "aux1" and "aux2" for measuring external
-			   temperatures.
-  ab8500-fg		 : io-channel "main_bat_v" for measuring main battery voltage,
-  ab8500-btemp		 : io-channels "btemp_ball" and "bat_ctrl" for measuring the
-			   battery voltage.
-  ab8500-charger	 : io-channels "main_charger_v", "main_charger_c", "vbus_v",
-			   "usb_charger_c" for measuring voltage and current of the
-			   different charging supplies.
-
-Optional child device properties:
-- interrupts             : contains the device IRQ(s) using the 2-cell format (see above)
-- interrupt-names        : contains names of IRQ resource in the order in which they were
-                           supplied in the interrupts property
-- <supply_name>-supply   : contains a phandle to the regulator supply node in Device Tree
-
-Non-standard child device properties:
- - Audio CODEC:
-   - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential)
-   - stericsson,amic1a-bias-vamic2          : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,amic1b-bias-vamic2          : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,amic2-bias-vamic1           : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,earpeice-cmv                : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
-
-ab8500 {
-         compatible = "stericsson,ab8500";
-         interrupts = <0 40 0x4>;
-         interrupt-controller;
-         #interrupt-cells = <2>;
-
-         ab8500-rtc {
-                 compatible = "stericsson,ab8500-rtc";
-                 interrupts = <17 0x4
-                               18 0x4>;
-                 interrupt-names = "60S", "ALARM";
-         };
-
-        ab8500-gpadc {
-                compatible = "stericsson,ab8500-gpadc";
-                interrupts = <32 0x4
-                              39 0x4>;
-                interrupt-names = "HW_CONV_END", "SW_CONV_END";
-                vddadc-supply = <&ab8500_ldo_tvout_reg>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#io-channel-cells = <1>;
-
-		/* GPADC channels */
-		bat_ctrl: channel@1 {
-			reg = <0x01>;
-		};
-		btemp_ball: channel@2 {
-			reg = <0x02>;
-		};
-		main_charger_v: channel@3 {
-			reg = <0x03>;
-		};
-		acc_detect1: channel@4 {
-			reg = <0x04>;
-		};
-		acc_detect2: channel@5 {
-			reg = <0x05>;
-		};
-		adc_aux1: channel@6 {
-			reg = <0x06>;
-		};
-		adc_aux2: channel@7 {
-			reg = <0x07>;
-		};
-		main_batt_v: channel@8 {
-			reg = <0x08>;
-		};
-		vbus_v: channel@9 {
-			reg = <0x09>;
-		};
-		main_charger_c: channel@a {
-			reg = <0x0a>;
-		};
-		usb_charger_c: channel@b {
-			reg = <0x0b>;
-		};
-		bk_bat_v: channel@c {
-			reg = <0x0c>;
-		};
-		die_temp: channel@d {
-			reg = <0x0d>;
-		};
-		usb_id: channel@e {
-			reg = <0x0e>;
-		};
-		xtal_temp: channel@12 {
-			reg = <0x12>;
-		};
-		vbat_true_meas: channel@13 {
-			reg = <0x13>;
-		};
-		bat_ctrl_and_ibat: channel@1c {
-			reg = <0x1c>;
-		};
-		vbat_meas_and_ibat: channel@1d {
-			reg = <0x1d>;
-		};
-		vbat_true_meas_and_ibat: channel@1e {
-			reg = <0x1e>;
-		};
-		bat_temp_and_ibat: channel@1f {
-			reg = <0x1f>;
-		};
-        };
-
-	ab8500_temp {
-		compatible = "stericsson,abx500-temp";
-		io-channels = <&gpadc 0x06>,
-			      <&gpadc 0x07>;
-		io-channel-name = "aux1", "aux2";
-	};
-
-	ab8500_battery: ab8500_battery {
-		stericsson,battery-type = "LIPO";
-		thermistor-on-batctrl;
-	};
-
-	ab8500_fg {
-		compatible = "stericsson,ab8500-fg";
-		battery	   = <&ab8500_battery>;
-		io-channels = <&gpadc 0x08>;
-		io-channel-name = "main_bat_v";
-	};
-
-	ab8500_btemp {
-		compatible = "stericsson,ab8500-btemp";
-		battery	   = <&ab8500_battery>;
-		io-channels = <&gpadc 0x02>,
-			      <&gpadc 0x01>;
-		io-channel-name = "btemp_ball",
-				"bat_ctrl";
-	};
-
-	ab8500_charger {
-		compatible	= "stericsson,ab8500-charger";
-		battery		= <&ab8500_battery>;
-		vddadc-supply	= <&ab8500_ldo_tvout_reg>;
-		io-channels = <&gpadc 0x03>,
-			      <&gpadc 0x0a>,
-			      <&gpadc 0x09>,
-			      <&gpadc 0x0b>;
-		io-channel-name = "main_charger_v",
-				"main_charger_c",
-				"vbus_v",
-				"usb_charger_c";
-	};
-
-        ab8500-usb {
-                compatible = "stericsson,ab8500-usb";
-                interrupts = < 90 0x4
-                               96 0x4
-                               14 0x4
-                               15 0x4
-                               79 0x4
-                               74 0x4
-                               75 0x4>;
-                interrupt-names = "ID_WAKEUP_R",
-                                  "ID_WAKEUP_F",
-                                  "VBUS_DET_F",
-                                  "VBUS_DET_R",
-                                  "USB_LINK_STATUS",
-                                  "USB_ADP_PROBE_PLUG",
-                                  "USB_ADP_PROBE_UNPLUG";
-                vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
-                v-ape-supply = <&db8500_vape_reg>;
-                musb_1v8-supply = <&db8500_vsmps2_reg>;
-        };
-
-        ab8500-ponkey {
-                compatible = "stericsson,ab8500-ponkey";
-                interrupts = <6 0x4
-                              7 0x4>;
-                interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
-        };
-
-        ab8500-sysctrl {
-                compatible = "stericsson,ab8500-sysctrl";
-        };
-
-        ab8500-pwm {
-                compatible = "stericsson,ab8500-pwm";
-        };
-
-	codec: ab8500-codec {
-		compatible = "stericsson,ab8500-codec";
-
-		stericsson,earpeice-cmv = <950>; /* Units in mV. */
-	};
-
-        ab8500-regulators {
-                compatible = "stericsson,ab8500-regulator";
-
-                ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-                        /*
-                         * See: Documentation/devicetree/bindings/regulator/regulator.txt
-                         * for more information on regulators
-                         */
-                };
-        };
-};
diff --git a/Documentation/devicetree/bindings/mfd/ac100.txt b/Documentation/devicetree/bindings/mfd/ac100.txt
deleted file mode 100644
index dff219f07493..000000000000
--- a/Documentation/devicetree/bindings/mfd/ac100.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-X-Powers AC100 Codec/RTC IC Device Tree bindings
-
-AC100 is a audio codec and RTC subsystem combo IC. The 2 parts are
-separated, including power supplies and interrupt lines, but share
-a common register address space and host interface.
-
-Required properties:
-- compatible: "x-powers,ac100"
-- reg: The I2C slave address or RSB hardware address for the chip
-- sub-nodes:
-  - codec
-    - compatible:		"x-powers,ac100-codec"
-    - interrupts:		SoC NMI / GPIO interrupt connected to the
-    				IRQ_AUDIO pin
-    - #clock-cells:		Shall be 0
-    - clock-output-names:	"4M_adda"
-
-    - see clock/clock-bindings.txt for common clock bindings
-
-  - rtc
-    - compatible:		"x-powers,ac100-rtc"
-    - clocks:			A phandle to the codec's "4M_adda" clock
-    - #clock-cells:		Shall be 1
-    - clock-output-names:	"cko1_rtc", "cko2_rtc", "cko3_rtc"
-
-    - see clock/clock-bindings.txt for common clock bindings
-
-Example:
-
-ac100: codec@e89 {
-	compatible = "x-powers,ac100";
-	reg = <0xe89>;
-
-	ac100_codec: codec {
-		compatible = "x-powers,ac100-codec";
-		interrupt-parent = <&r_pio>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
-		#clock-cells = <0>;
-		clock-output-names = "4M_adda";
-	};
-
-	ac100_rtc: rtc {
-		compatible = "x-powers,ac100-rtc";
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&ac100_codec>;
-		#clock-cells = <1>;
-		clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc";
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
index e6f168db6c72..5ca75d888b4a 100644
--- a/Documentation/devicetree/bindings/mfd/act8945a.txt
+++ b/Documentation/devicetree/bindings/mfd/act8945a.txt
@@ -71,7 +71,7 @@ Example:
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
 			interrupt-parent = <&pioA>;
-			interrupts = <45 GPIO_ACTIVE_LOW>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
 
 			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
 			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
new file mode 100644
index 000000000000..dd43a0c766f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi ATC260x Power Management IC bindings
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+  ATC260x series PMICs integrates Audio Codec, Power Management, RTC, IR
+  and GPIO controller blocks. Currently only the PM related functionalities
+  (i.e. regulators and system power-off/reboot) for the ATC2603C and ATC2609A
+  chip variants are supported.
+  ATC2603C includes 3 programmable DC-DC converters, 9 programmable LDO
+  regulators and 1 fixed LDO regulator.
+  ATC2609A includes 5 programmable DC-DC converters and 10 programmable LDO
+  regulators.
+
+allOf:
+  - $ref: ../input/input.yaml
+
+properties:
+  compatible:
+    enum:
+      - actions,atc2603c
+      - actions,atc2609a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-time-sec:
+    description: |
+      Duration in seconds which the key should be kept pressed for device
+      to reset automatically. The hardware default is 8. Use 0 to disable
+      this functionality.
+    enum: [0, 6, 8, 10, 12]
+
+  regulators:
+    type: object
+    description: |
+      List of child nodes specifying the regulators, depending on chip variant:
+      * ATC2603C: dcdc[1-3], ldo[1-3,5-8,11,12], switchldo1
+      * ATC2609A: dcdc[0-4], ldo[0-9]
+
+    properties:
+      compatible:
+        enum:
+          - actions,atc2603c-regulator
+          - actions,atc2609a-regulator
+
+      switchldo1:
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-allow-bypass: true
+          regulator-active-discharge: true
+
+        additionalProperties: false
+
+    patternProperties:
+      "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2]|switchldo1)-supply$":
+        description: ATC260x voltage regulators supplies
+
+      "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-allow-bypass: true
+
+        additionalProperties: false
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: actions,atc2603c-regulator
+        then:
+          patternProperties:
+            "^(dcdc[0,4]|ldo[0,4,9])(-supply)?$": false
+
+            "^(ldo|dcdc)":
+              properties:
+                regulator-allow-bypass: false
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: actions,atc2609a-regulator
+        then:
+          patternProperties:
+            "^(ldo1[1-2]|switchldo1)(-supply)?$": false
+
+            "^(dcdc|ldo[3-9])":
+              properties:
+                regulator-allow-bypass: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@65 {
+            compatible = "actions,atc2603c";
+            reg = <0x65>;
+            interrupt-parent = <&sirq>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+            reset-time-sec = <6>;
+
+            regulators {
+                compatible = "actions,atc2603c-regulator";
+
+                dcdc1-supply = <&reg_5v0>;
+                dcdc3-supply = <&reg_5v0>;
+                ldo5-supply = <&reg_5v0>;
+                switchldo1-supply = <&vcc>;
+
+                vdd_cpu: dcdc1 {
+                    regulator-name = "VDD_CPU";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1400000>;
+                    regulator-always-on;
+                };
+
+                vcc: dcdc3 {
+                    regulator-name = "VCC";
+                    regulator-min-microvolt = <2600000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                vcc_3v1: ldo5 {
+                    regulator-name = "VCC_3V1";
+                    regulator-min-microvolt = <2600000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                sd_vcc: switchldo1 {
+                    regulator-name = "SD_VCC";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
index 39afacc447b2..93f5065a6280 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/allwinner,sun4i-a10-ts.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings
+title: Allwinner A10 Resistive Touchscreen Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -31,19 +31,19 @@ properties:
     description: A touchscreen is attached to the controller
 
   allwinner,tp-sensitive-adjust:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 15
-        default: 15
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 15
+
     description: Sensitivity of pen down detection
 
   allwinner,filter-type:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 3
-        default: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 1
+
     description: |
       Select median and averaging filter. Sample used for median /
       averaging filter:
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
index d131759ccaf3..cf94176fe1eb 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/allwinner,sun6i-a31-prcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 PRCM Device Tree Bindings
+title: Allwinner A31 PRCM
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -22,6 +22,7 @@ properties:
 patternProperties:
   "^.*_(clk|rst)$":
     type: object
+    unevaluatedProperties: false
 
     properties:
       compatible:
@@ -38,6 +39,45 @@ patternProperties:
           properties:
             compatible:
               contains:
+                const: fixed-factor-clock
+
+        then:
+          $ref: /schemas/clock/fixed-factor-clock.yaml#
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun4i-a10-mod0-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 0
+
+            # Already checked in the main schema
+            compatible: true
+
+            clocks:
+              maxItems: 2
+
+            clock-output-names:
+              maxItems: 1
+
+            phandle: true
+
+          required:
+            - "#clock-cells"
+            - compatible
+            - clocks
+            - clock-output-names
+
+          additionalProperties: false
+
+      - if:
+          properties:
+            compatible:
+              contains:
                 const: allwinner,sun6i-a31-apb0-clk
 
         then:
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
index aa5e683b236c..16c80a7eec49 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/allwinner,sun8i-a23-prcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A23 PRCM Device Tree Bindings
+title: Allwinner A23 PRCM
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -22,6 +22,7 @@ properties:
 patternProperties:
   "^.*(clk|rst|codec).*$":
     type: object
+    unevaluatedProperties: false
 
     properties:
       compatible:
@@ -40,6 +41,15 @@ patternProperties:
           properties:
             compatible:
               contains:
+                const: fixed-factor-clock
+
+        then:
+          $ref: /schemas/clock/fixed-factor-clock.yaml#
+
+      - if:
+          properties:
+            compatible:
+              contains:
                 const: allwinner,sun8i-a23-apb0-clk
 
         then:
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
deleted file mode 100644
index 148ef621a5e5..000000000000
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-Required properties:
-
-  - compatible : One of the following chip-specific strings:
-        "cirrus,cs47l24"
-        "wlf,wm5102"
-        "wlf,wm5110"
-        "wlf,wm8280"
-        "wlf,wm8997"
-        "wlf,wm8998"
-        "wlf,wm1814"
-        "wlf,wm1831"
-
-  - reg : I2C slave address when connected using I2C, chip select number when
-    using SPI.
-
-  - interrupts : The interrupt line the /IRQ signal for the device is
-    connected to.
-  - interrupt-controller : Arizona class devices contain interrupt controllers
-    and may provide interrupt services to other devices.
-  - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
-    The first cell is the IRQ number.
-    The second cell is the flags, encoded as the trigger masks from
-    Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-  - gpio-controller : Indicates this device is a GPIO controller.
-  - #gpio-cells : Must be 2. The first cell is the pin number and the
-    second cell is used to specify optional parameters, see ../gpio/gpio.txt
-    for details.
-
-  - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device,
-    as covered in Documentation/devicetree/bindings/regulator/regulator.txt
-
-  - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102,
-    wm5110, wm8280, wm8998, wm1814)
-
-  - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102,
-    wm5110, wm8280, wm8998, wm1814)
-
-  - SPKVDD-supply : Speaker driver power supply (wm8997)
-
-  - DCVDD-supply : Main power supply (cs47l24, wm1831)
-
-  - MICVDD-supply : Microphone power supply (cs47l24, wm1831)
-
-Optional properties:
-
-  - reset-gpios : GPIO specifier for the GPIO controlling /RESET
-
-  - clocks: Should reference the clocks supplied on MCLK1 and MCLK2
-  - clock-names: Should contains two strings:
-      "mclk1" for the clock supplied on MCLK1, recommended to be a high
-      quality audio reference clock
-      "mclk2" for the clock supplied on MCLK2, recommended to be an always on
-      32k clock
-
-  - wlf,gpio-defaults : A list of GPIO configuration register values. Defines
-    for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
-    absent, no configuration of these registers is performed. If any entry has
-    a value that is out of range for a 16 bit register then the chip default
-    will be used. If present exactly five values must be specified.
-
-  - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
-    they are being externally supplied. As covered in
-    Documentation/devicetree/bindings/regulator/regulator.txt
-    (wm5102, wm5110, wm8280, wm8997, wm8998, wm1814)
-
-Deprecated properties:
-
-  - wlf,reset : GPIO specifier for the GPIO controlling /RESET
-
-Also see child specific device properties:
-  Regulator - ../regulator/arizona-regulator.txt
-  Extcon    - ../extcon/extcon-arizona.txt
-  Sound     - ../sound/wlf,arizona.txt
-
-Example:
-
-codec: wm5102@1a {
-	compatible = "wlf,wm5102";
-	reg = <0x1a>;
-	interrupts = <347>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-        interrupt-parent = <&gic>;
-
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	wlf,gpio-defaults = <
-		ARIZONA_GP_FN_TXLRCLK
-		ARIZONA_GP_DEFAULT
-		ARIZONA_GP_DEFAULT
-		ARIZONA_GP_DEFAULT
-		ARIZONA_GP_DEFAULT
-	>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
new file mode 100644
index 000000000000..1689b986f441
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed System Control Unit
+
+description:
+  The Aspeed System Control Unit manages the global behaviour of the SoC,
+  configuring elements such as clocks, pinmux, and reset.
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+  - Andrew Jeffery <andrew@aj.id.au>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-scu
+          - aspeed,ast2500-scu
+          - aspeed,ast2600-scu
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+patternProperties:
+  '^p2a-control@[0-9a-f]+$':
+    description: See Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
+    type: object
+
+  '^pinctrl(@[0-9a-f]+)?$':
+    oneOf:
+      - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml
+      - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml
+      - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml
+
+  '^interrupt-controller@[0-9a-f]+$':
+    description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
+    type: object
+
+  '^silicon-id@[0-9a-f]+$':
+    description: Unique hardware silicon identifiers within the SoC
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-silicon-id
+              - aspeed,ast2500-silicon-id
+              - aspeed,ast2600-silicon-id
+          - const: aspeed,silicon-id
+
+      reg:
+        description:
+          The reg should be the unique silicon id register, and not backwards
+          compatible one in eg. the 2600.
+        minItems: 1
+        items:
+          - description: silicon id information registers
+          - description: unique chip id registers
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1e6e2000 {
+        compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+        reg = <0x1e6e2000 0x1a8>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
+
+        silicon-id@7c {
+            compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
+            reg = <0x7c 0x4>, <0x150 0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
deleted file mode 100644
index 86446074e206..000000000000
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
+++ /dev/null
@@ -1,201 +0,0 @@
-======================================================================
-Device tree bindings for the Aspeed Low Pin Count (LPC) Bus Controller
-======================================================================
-
-The LPC bus is a means to bridge a host CPU to a number of low-bandwidth
-peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The
-primary use case of the Aspeed LPC controller is as a slave on the bus
-(typically in a Baseboard Management Controller SoC), but under certain
-conditions it can also take the role of bus master.
-
-The LPC controller is represented as a multi-function device to account for the
-mix of functionality it provides. The principle split is between the register
-layout at the start of the I/O space which is, to quote the Aspeed datasheet,
-"basically compatible with the [LPC registers from the] popular BMC controller
-H8S/2168[1]", and everything else, where everything else is an eclectic
-collection of functions with a esoteric register layout. "Everything else",
-here labeled the "host" portion of the controller, includes, but is not limited
-to:
-
-* An IPMI Block Transfer[2] Controller
-
-* An LPC Host Controller: Manages LPC functions such as host vs slave mode, the
-  physical properties of some LPC pins, configuration of serial IRQs, and
-  APB-to-LPC bridging amonst other functions.
-
-* An LPC Host Interface Controller: Manages functions exposed to the host such
-  as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
-  management and bus snoop configuration.
-
-* A set of SuperIO[3] scratch registers: Enables implementation of e.g. custom
-  hardware management protocols for handover between the host and baseboard
-  management controller.
-
-Additionally the state of the LPC controller influences the pinmux
-configuration, therefore the host portion of the controller is exposed as a
-syscon as a means to arbitrate access.
-
-[0] http://www.intel.com/design/chipsets/industry/25128901.pdf
-[1] https://www.renesas.com/en-sg/doc/products/mpumcu/001/rej09b0078_h8s2168.pdf?key=7c88837454702128622bee53acbda8f4
-[2] http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf
-[3] https://en.wikipedia.org/wiki/Super_I/O
-
-Required properties
-===================
-
-- compatible:	One of:
-		"aspeed,ast2400-lpc", "simple-mfd"
-		"aspeed,ast2500-lpc", "simple-mfd"
-
-- reg:		contains the physical address and length values of the Aspeed
-                LPC memory region.
-
-- #address-cells: <1>
-- #size-cells:	<1>
-- ranges: 	Maps 0 to the physical address and length of the LPC memory
-                region
-
-Required LPC Child nodes
-========================
-
-BMC Node
---------
-
-- compatible:	One of:
-		"aspeed,ast2400-lpc-bmc"
-		"aspeed,ast2500-lpc-bmc"
-
-- reg:		contains the physical address and length values of the
-                H8S/2168-compatible LPC controller memory region
-
-Host Node
----------
-
-- compatible:   One of:
-		"aspeed,ast2400-lpc-host", "simple-mfd", "syscon"
-		"aspeed,ast2500-lpc-host", "simple-mfd", "syscon"
-
-- reg:		contains the address and length values of the host-related
-                register space for the Aspeed LPC controller
-
-- #address-cells: <1>
-- #size-cells:	<1>
-- ranges: 	Maps 0 to the address and length of the host-related LPC memory
-                region
-
-Example:
-
-lpc: lpc@1e789000 {
-	compatible = "aspeed,ast2500-lpc", "simple-mfd";
-	reg = <0x1e789000 0x1000>;
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x0 0x1e789000 0x1000>;
-
-	lpc_bmc: lpc-bmc@0 {
-		compatible = "aspeed,ast2500-lpc-bmc";
-		reg = <0x0 0x80>;
-	};
-
-	lpc_host: lpc-host@80 {
-		compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
-		reg = <0x80 0x1e0>;
-		reg-io-width = <4>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x80 0x1e0>;
-	};
-};
-
-BMC Node Children
-==================
-
-
-Host Node Children
-==================
-
-LPC Host Interface Controller
--------------------
-
-The LPC Host Interface Controller manages functions exposed to the host such as
-LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
-management and bus snoop configuration.
-
-Required properties:
-
-- compatible:	One of:
-		"aspeed,ast2400-lpc-ctrl";
-		"aspeed,ast2500-lpc-ctrl";
-
-- reg:		contains offset/length values of the host interface controller
-		memory regions
-
-- clocks:	contains a phandle to the syscon node describing the clocks.
-		There should then be one cell representing the clock to use
-
-Optional properties:
-
-- memory-region: A phandle to a reserved_memory region to be used for the LPC
-		to AHB mapping
-
-- flash:	A phandle to the SPI flash controller containing the flash to
-		be exposed over the LPC to AHB mapping
-
-Example:
-
-lpc-host@80 {
-	lpc_ctrl: lpc-ctrl@0 {
-		compatible = "aspeed,ast2500-lpc-ctrl";
-		reg = <0x0 0x80>;
-		clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-		memory-region = <&flash_memory>;
-		flash = <&spi>;
-	};
-};
-
-LPC Host Controller
--------------------
-
-The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour
-between the host and the baseboard management controller. The registers exist
-in the "host" portion of the Aspeed LPC controller, which must be the parent of
-the LPC host controller node.
-
-Required properties:
-
-- compatible:	One of:
-		"aspeed,ast2400-lhc";
-		"aspeed,ast2500-lhc";
-
-- reg:		contains offset/length values of the LHC memory regions. In the
-		AST2400 and AST2500 there are two regions.
-
-Example:
-
-lhc: lhc@20 {
-	compatible = "aspeed,ast2500-lhc";
-	reg = <0x20 0x24 0x48 0x8>;
-};
-
-LPC reset control
------------------
-
-The UARTs present in the ASPEED SoC can have their resets tied to the reset
-state of the LPC bus. Some systems may chose to modify this configuration.
-
-Required properties:
-
- - compatible:		"aspeed,ast2500-lpc-reset" or
-			"aspeed,ast2400-lpc-reset"
- - reg:			offset and length of the IP in the LHC memory region
- - #reset-controller	indicates the number of reset cells expected
-
-Example:
-
-lpc_reset: reset-controller@18 {
-        compatible = "aspeed,ast2500-lpc-reset";
-        reg = <0x18 0x4>;
-        #reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
new file mode 100644
index 000000000000..750996d9a175
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# # Copyright (c) 2021 Aspeed Tehchnology Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed Low Pin Count (LPC) Bus Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+  - Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+
+description:
+  The LPC bus is a means to bridge a host CPU to a number of low-bandwidth
+  peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The
+  primary use case of the Aspeed LPC controller is as a slave on the bus
+  (typically in a Baseboard Management Controller SoC), but under certain
+  conditions it can also take the role of bus master.
+
+  The LPC controller is represented as a multi-function device to account for the
+  mix of functionality, which includes, but is not limited to
+
+  * An IPMI Block Transfer[2] Controller
+
+  * An LPC Host Interface Controller manages functions exposed to the host such
+    as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
+    management and bus snoop configuration.
+
+  * A set of SuperIO[3] scratch registers enableing implementation of e.g. custom
+    hardware management protocols for handover between the host and baseboard
+    management controller.
+
+  Additionally the state of the LPC controller influences the pinmux
+  configuration, therefore the host portion of the controller is exposed as a
+  syscon as a means to arbitrate access.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-lpc-v2
+          - aspeed,ast2500-lpc-v2
+          - aspeed,ast2600-lpc-v2
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^lpc-ctrl@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    description: |
+      The LPC Host Interface Controller manages functions exposed to the host such as
+      LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART management
+      and bus snoop configuration.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-lpc-ctrl
+              - aspeed,ast2500-lpc-ctrl
+              - aspeed,ast2600-lpc-ctrl
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      memory-region:
+        maxItems: 1
+        description: handle to memory reservation for the LPC to AHB mapping region
+
+      flash:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: The SPI flash controller containing the flash to be exposed over the LPC to AHB mapping
+
+    required:
+      - compatible
+      - clocks
+
+  "^reset-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    description:
+      The UARTs present in the ASPEED SoC can have their resets tied to the reset
+      state of the LPC bus. Some systems may chose to modify this configuration
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-lpc-reset
+              - aspeed,ast2500-lpc-reset
+              - aspeed,ast2600-lpc-reset
+
+      reg:
+        maxItems: 1
+
+      '#reset-cells':
+        const: 1
+
+    required:
+      - compatible
+      - '#reset-cells'
+
+  "^lpc-snoop@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    description:
+      The LPC snoop interface allows the BMC to listen on and record the data
+      bytes written by the Host to the targeted LPC I/O pots.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-lpc-snoop
+              - aspeed,ast2500-lpc-snoop
+              - aspeed,ast2600-lpc-snoop
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      snoop-ports:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: The LPC I/O ports to snoop
+
+    required:
+      - compatible
+      - interrupts
+      - snoop-ports
+
+  "^uart-routing@[0-9a-f]+$":
+    $ref: /schemas/soc/aspeed/uart-routing.yaml#
+    description: The UART routing control under LPC register space
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+
+    lpc: lpc@1e789000 {
+        compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
+        reg = <0x1e789000 0x1000>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e789000 0x1000>;
+
+        lpc_ctrl: lpc-ctrl@80 {
+            compatible = "aspeed,ast2600-lpc-ctrl";
+            reg = <0x80 0x80>;
+            clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+            memory-region = <&flash_memory>;
+            flash = <&spi>;
+        };
+
+        lpc_reset: reset-controller@98 {
+            compatible = "aspeed,ast2600-lpc-reset";
+            reg = <0x98 0x4>;
+            #reset-cells = <1>;
+        };
+
+        lpc_snoop: lpc-snoop@90 {
+            compatible = "aspeed,ast2600-lpc-snoop";
+            reg = <0x90 0x8>;
+            interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+            snoop-ports = <0x80>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt
deleted file mode 100644
index 4d92c0bb6687..000000000000
--- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-The Aspeed System Control Unit manages the global behaviour of the SoC,
-configuring elements such as clocks, pinmux, and reset.
-
-Required properties:
-- compatible:	One of:
-		"aspeed,ast2400-scu", "syscon", "simple-mfd"
-		"aspeed,ast2500-scu", "syscon", "simple-mfd"
-
-- reg:		contains the offset and length of the SCU memory region
-- #clock-cells: should be set to <1> - the system controller is also a
-	clock provider
-- #reset-cells: should be set to <1> - the system controller is also a
-	reset line provider
-
-Example:
-
-syscon: syscon@1e6e2000 {
-	compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
-	reg = <0x1e6e2000 0x1a8>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
index 692300117c64..9d837535637b 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
@@ -54,7 +54,7 @@ flexcom@f8034000 {
 		clock-names = "spi_clk";
 		atmel,fifo-size = <32>;
 
-		mtd_dataflash@0 {
+		flash@0 {
 			compatible = "atmel,at25f512b";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
diff --git a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt b/Documentation/devicetree/bindings/mfd/atmel-tcb.txt
deleted file mode 100644
index c4a83e364cb6..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Device tree bindings for Atmel Timer Counter Blocks
-- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon".
-  <chip> can be "at91rm9200" or "at91sam9x5"
-- reg: Should contain registers location and length
-- #address-cells: has to be 1
-- #size-cells: has to be 0
-- interrupts: Should contain all interrupts for the TC block
-  Note that you can specify several interrupt cells if the TC
-  block has one interrupt per channel.
-- clock-names: tuple listing input clock names.
-	Required elements: "t0_clk", "slow_clk"
-	Optional elements: "t1_clk", "t2_clk"
-- clocks: phandles to input clocks.
-
-The TCB can expose multiple subdevices:
- * a timer
-   - compatible: Should be "atmel,tcb-timer"
-   - reg: Should contain the TCB channels to be used. If the
-     counter width is 16 bits (at91rm9200-tcb), two consecutive
-     channels are needed. Else, only one channel will be used.
-
-Examples:
-
-One interrupt per TC block:
-	tcb0: timer@fff7c000 {
-		compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xfff7c000 0x100>;
-		interrupts = <18 4>;
-		clocks = <&tcb0_clk>, <&clk32k>;
-		clock-names = "t0_clk", "slow_clk";
-
-		timer@0 {
-			compatible = "atmel,tcb-timer";
-			reg = <0>, <1>;
-		};
-
-		timer@2 {
-			compatible = "atmel,tcb-timer";
-			reg = <2>;
-		};
-	};
-
-One interrupt per TC channel in a TC block:
-	tcb1: timer@fffdc000 {
-		compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xfffdc000 0x100>;
-		interrupts = <26 4>, <27 4>, <28 4>;
-		clocks = <&tcb1_clk>, <&clk32k>;
-		clock-names = "t0_clk", "slow_clk";
-	};
-
-
diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
deleted file mode 100644
index a09133066aff..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
-
-Required properties for USART:
-- compatible: Should be one of the following:
-	- "atmel,at91rm9200-usart"
-	- "atmel,at91sam9260-usart"
-	- "microchip,sam9x60-usart"
-	- "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
-	- "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"
-	- "microchip,sam9x60-dbgu", "microchip,sam9x60-usart"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt
-- clock-names: tuple listing input clock names.
-	Required elements: "usart"
-- clocks: phandles to input clocks.
-
-Required properties for USART in SPI mode:
-- #size-cells      : Must be <0>
-- #address-cells   : Must be <1>
-- cs-gpios: chipselects (internal cs not supported)
-- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h)
-
-Optional properties in serial and SPI mode:
-- dma bindings for dma transfer:
-	- dmas: DMA specifier, consisting of a phandle to DMA controller node,
-		memory peripheral interface and USART DMA channel ID, FIFO configuration.
-		The order of DMA channels is fixed. The first DMA channel must be TX
-		associated channel and the second one must be RX associated channel.
-		Refer to dma.txt and atmel-dma.txt for details.
-	- dma-names: "tx" for TX channel.
-		     "rx" for RX channel.
-		     The order of dma-names is also fixed. The first name must be "tx"
-		     and the second one must be "rx" as in the examples below.
-
-Optional properties in serial mode:
-- atmel,use-dma-rx: use of PDC or DMA for receiving data
-- atmel,use-dma-tx: use of PDC or DMA for transmitting data
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
-  It will use specified PIO instead of the peripheral function pin for the USART feature.
-  If unsure, don't specify this property.
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
-  capable USARTs.
-- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
-
-<chip> compatible description:
-- at91rm9200:  legacy USART support
-- at91sam9260: generic USART implementation for SAM9 SoCs
-
-Example:
-- use PDC:
-	usart0: serial@fff8c000 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0xfff8c000 0x4000>;
-		interrupts = <7>;
-		clocks = <&usart0_clk>;
-		clock-names = "usart";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
-		cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
-		dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
-		rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
-	};
-
-- use DMA:
-	usart0: serial@f001c000 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0xf001c000 0x100>;
-		interrupts = <12 4 5>;
-		clocks = <&usart0_clk>;
-		clock-names = "usart";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		dmas = <&dma0 2 0x3>,
-		       <&dma0 2 0x204>;
-		dma-names = "tx", "rx";
-		atmel,fifo-size = <32>;
-	};
-
-- SPI mode:
-	#include <dt-bindings/mfd/at91-usart.h>
-
-	spi0: spi@f001c000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart";
-		atmel,usart-mode = <AT91_USART_MODE_SPI>;
-		reg = <0xf001c000 0x100>;
-		interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
-		clocks = <&usart0_clk>;
-		clock-names = "usart";
-		dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
-		       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
-		dma-names = "tx", "rx";
-		cs-gpios = <&pioB 3 0>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
deleted file mode 100644
index 4991a6415796..000000000000
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ /dev/null
@@ -1,272 +0,0 @@
-AXP family PMIC device tree bindings
-
-The axp20x family current members :
-axp152 (X-Powers)
-axp202 (X-Powers)
-axp209 (X-Powers)
-axp221 (X-Powers)
-axp223 (X-Powers)
-axp803 (X-Powers)
-axp806 (X-Powers)
-axp809 (X-Powers)
-axp813 (X-Powers)
-
-The AXP813 is 2 chips packaged into 1. The 2 chips do not share anything
-other than the packaging. Pins are routed separately. As such they should
-be treated as separate entities. The other half is an AC100 RTC/codec
-combo chip. Please see ./ac100.txt for its bindings.
-
-Required properties:
-- compatible: should be one of:
-    * "x-powers,axp152"
-    * "x-powers,axp202"
-    * "x-powers,axp209"
-    * "x-powers,axp221"
-    * "x-powers,axp223"
-    * "x-powers,axp803"
-    * "x-powers,axp806"
-    * "x-powers,axp805", "x-powers,axp806"
-    * "x-powers,axp809"
-    * "x-powers,axp813"
-- reg: The I2C slave address or RSB hardware address for the AXP chip
-- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
-- interrupt-controller: The PMIC has its own internal IRQs
-- #interrupt-cells: Should be set to 1
-
-Supported common regulator properties, see ../regulator/regulator.txt for
-more information:
-- regulator-ramp-delay: sets the ramp up delay in uV/us
-			AXP20x/DCDC2: 1600, 800
-			AXP20x/LDO3:  1600, 800
-- regulator-soft-start:	enable the output at the lowest possible voltage and
-			only then set the desired voltage
-			AXP20x/LDO3: software-based implementation
-
-Optional properties:
-- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz
-		      AXP152/20X: range:  750-1875, Default: 1.5 MHz
-		      AXP22X/8XX: range: 1800-4050, Default: 3   MHz
-
-- x-powers,drive-vbus-en: boolean, set this when the N_VBUSEN pin is
-			  used as an output pin to control an external
-			  regulator to drive the OTG VBus, rather then
-			  as an input pin which signals whether the
-			  board is driving OTG VBus or not.
-			  (axp221 / axp223 / axp803/ axp813 only)
-
-- x-powers,self-working-mode and
-  x-powers,master-mode: Boolean (axp806 only). Set either of these when the
-			PMIC is wired for self-working mode or master mode.
-			If neither is set then slave mode is assumed.
-			This corresponds to how the MODESET pin is wired.
-
-- <input>-supply: a phandle to the regulator supply node. May be omitted if
-		  inputs are unregulated, such as using the IPSOUT output
-		  from the PMIC.
-
-- regulators: A node that houses a sub-node for each regulator. Regulators
-	      not used but preferred to be managed by the OS should be
-	      listed as well.
-	      See Documentation/devicetree/bindings/regulator/regulator.txt
-	      for more information on standard regulator bindings.
-
-Optional properties for DCDC regulators:
-- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO (PWM/PFM) mode
-			  Default: Current hardware setting
-			  The DCDC regulators work in a mixed PWM/PFM mode,
-			  using PFM under light loads and switching to PWM
-			  for heavier loads. Forcing PWM mode trades efficiency
-			  under light loads for lower output noise. This
-			  probably makes sense for HiFi audio related
-			  applications that aren't battery constrained.
-
-AXP202/AXP209 regulators, type, and corresponding input supply names:
-
-Regulator	  Type		  Supply Name		  Notes
----------	  ----		  -----------		  -----
-DCDC2		: DC-DC buck	: vin2-supply
-DCDC3		: DC-DC	buck	: vin3-supply
-LDO1		: LDO		: acin-supply		: always on
-LDO2		: LDO		: ldo24in-supply	: shared supply
-LDO3		: LDO		: ldo3in-supply
-LDO4		: LDO		: ldo24in-supply	: shared supply
-LDO5		: LDO		: ldo5in-supply
-
-AXP221/AXP223 regulators, type, and corresponding input supply names:
-
-Regulator	  Type		  Supply Name		  Notes
----------	  ----		  -----------		  -----
-DCDC1		: DC-DC buck	: vin1-supply
-DCDC2		: DC-DC buck	: vin2-supply
-DCDC3		: DC-DC	buck	: vin3-supply
-DCDC4		: DC-DC	buck	: vin4-supply
-DCDC5		: DC-DC	buck	: vin5-supply
-DC1SW		: On/Off Switch	:			: DCDC1 secondary output
-DC5LDO		: LDO		:			: input from DCDC5
-ALDO1		: LDO		: aldoin-supply		: shared supply
-ALDO2		: LDO		: aldoin-supply		: shared supply
-ALDO3		: LDO		: aldoin-supply		: shared supply
-DLDO1		: LDO		: dldoin-supply		: shared supply
-DLDO2		: LDO		: dldoin-supply		: shared supply
-DLDO3		: LDO		: dldoin-supply		: shared supply
-DLDO4		: LDO		: dldoin-supply		: shared supply
-ELDO1		: LDO		: eldoin-supply		: shared supply
-ELDO2		: LDO		: eldoin-supply		: shared supply
-ELDO3		: LDO		: eldoin-supply		: shared supply
-LDO_IO0		: LDO		: ips-supply		: GPIO 0
-LDO_IO1		: LDO		: ips-supply		: GPIO 1
-RTC_LDO		: LDO		: ips-supply		: always on
-DRIVEVBUS	: Enable output	: drivevbus-supply	: external regulator
-
-AXP803 regulators, type, and corresponding input supply names:
-
-Regulator	  Type		  Supply Name		  Notes
----------	  ----		  -----------		  -----
-DCDC1		: DC-DC buck	: vin1-supply
-DCDC2		: DC-DC buck	: vin2-supply		: poly-phase capable
-DCDC3		: DC-DC	buck	: vin3-supply		: poly-phase capable
-DCDC4		: DC-DC	buck	: vin4-supply
-DCDC5		: DC-DC	buck	: vin5-supply		: poly-phase capable
-DCDC6		: DC-DC	buck	: vin6-supply		: poly-phase capable
-DC1SW		: On/Off Switch	:			: DCDC1 secondary output
-ALDO1		: LDO		: aldoin-supply		: shared supply
-ALDO2		: LDO		: aldoin-supply		: shared supply
-ALDO3		: LDO		: aldoin-supply		: shared supply
-DLDO1		: LDO		: dldoin-supply		: shared supply
-DLDO2		: LDO		: dldoin-supply		: shared supply
-DLDO3		: LDO		: dldoin-supply		: shared supply
-DLDO4		: LDO		: dldoin-supply		: shared supply
-ELDO1		: LDO		: eldoin-supply		: shared supply
-ELDO2		: LDO		: eldoin-supply		: shared supply
-ELDO3		: LDO		: eldoin-supply		: shared supply
-FLDO1		: LDO		: fldoin-supply		: shared supply
-FLDO2		: LDO		: fldoin-supply		: shared supply
-LDO_IO0		: LDO		: ips-supply		: GPIO 0
-LDO_IO1		: LDO		: ips-supply		: GPIO 1
-RTC_LDO		: LDO		: ips-supply		: always on
-DRIVEVBUS	: Enable output	: drivevbus-supply	: external regulator
-
-AXP806 regulators, type, and corresponding input supply names:
-
-Regulator	  Type		  Supply Name		  Notes
----------	  ----		  -----------		  -----
-DCDCA		: DC-DC buck	: vina-supply		: poly-phase capable
-DCDCB		: DC-DC buck	: vinb-supply		: poly-phase capable
-DCDCC		: DC-DC	buck	: vinc-supply		: poly-phase capable
-DCDCD		: DC-DC	buck	: vind-supply		: poly-phase capable
-DCDCE		: DC-DC	buck	: vine-supply		: poly-phase capable
-ALDO1		: LDO		: aldoin-supply		: shared supply
-ALDO2		: LDO		: aldoin-supply		: shared supply
-ALDO3		: LDO		: aldoin-supply		: shared supply
-BLDO1		: LDO		: bldoin-supply		: shared supply
-BLDO2		: LDO		: bldoin-supply		: shared supply
-BLDO3		: LDO		: bldoin-supply		: shared supply
-BLDO4		: LDO		: bldoin-supply		: shared supply
-CLDO1		: LDO		: cldoin-supply		: shared supply
-CLDO2		: LDO		: cldoin-supply		: shared supply
-CLDO3		: LDO		: cldoin-supply		: shared supply
-SW		: On/Off Switch : swin-supply
-
-Additionally, the AXP806 DC-DC regulators support poly-phase arrangements
-for higher output current. The possible groupings are: A+B, A+B+C, D+E.
-
-AXP809 regulators, type, and corresponding input supply names:
-
-Regulator	  Type		  Supply Name		  Notes
----------	  ----		  -----------		  -----
-DCDC1		: DC-DC buck	: vin1-supply
-DCDC2		: DC-DC buck	: vin2-supply
-DCDC3		: DC-DC	buck	: vin3-supply
-DCDC4		: DC-DC	buck	: vin4-supply
-DCDC5		: DC-DC	buck	: vin5-supply
-DC1SW		: On/Off Switch	:			: DCDC1 secondary output
-DC5LDO		: LDO		:			: input from DCDC5
-ALDO1		: LDO		: aldoin-supply		: shared supply
-ALDO2		: LDO		: aldoin-supply		: shared supply
-ALDO3		: LDO		: aldoin-supply		: shared supply
-DLDO1		: LDO		: dldoin-supply		: shared supply
-DLDO2		: LDO		: dldoin-supply		: shared supply
-ELDO1		: LDO		: eldoin-supply		: shared supply
-ELDO2		: LDO		: eldoin-supply		: shared supply
-ELDO3		: LDO		: eldoin-supply		: shared supply
-LDO_IO0		: LDO		: ips-supply		: GPIO 0
-LDO_IO1		: LDO		: ips-supply		: GPIO 1
-RTC_LDO		: LDO		: ips-supply		: always on
-SW		: On/Off Switch : swin-supply
-
-AXP813 regulators, type, and corresponding input supply names:
-
-Regulator	  Type		  Supply Name		  Notes
----------	  ----		  -----------		  -----
-DCDC1		: DC-DC buck	: vin1-supply
-DCDC2		: DC-DC buck	: vin2-supply		: poly-phase capable
-DCDC3		: DC-DC	buck	: vin3-supply		: poly-phase capable
-DCDC4		: DC-DC	buck	: vin4-supply
-DCDC5		: DC-DC	buck	: vin5-supply		: poly-phase capable
-DCDC6		: DC-DC	buck	: vin6-supply		: poly-phase capable
-DCDC7		: DC-DC	buck	: vin7-supply
-ALDO1		: LDO		: aldoin-supply		: shared supply
-ALDO2		: LDO		: aldoin-supply		: shared supply
-ALDO3		: LDO		: aldoin-supply		: shared supply
-DLDO1		: LDO		: dldoin-supply		: shared supply
-DLDO2		: LDO		: dldoin-supply		: shared supply
-DLDO3		: LDO		: dldoin-supply		: shared supply
-DLDO4		: LDO		: dldoin-supply		: shared supply
-ELDO1		: LDO		: eldoin-supply		: shared supply
-ELDO2		: LDO		: eldoin-supply		: shared supply
-ELDO3		: LDO		: eldoin-supply		: shared supply
-FLDO1		: LDO		: fldoin-supply		: shared supply
-FLDO2		: LDO		: fldoin-supply		: shared supply
-FLDO3		: LDO		: fldoin-supply		: shared supply
-LDO_IO0		: LDO		: ips-supply		: GPIO 0
-LDO_IO1		: LDO		: ips-supply		: GPIO 1
-RTC_LDO		: LDO		: ips-supply		: always on
-SW		: On/Off Switch : swin-supply
-DRIVEVBUS	: Enable output	: drivevbus-supply	: external regulator
-
-Example:
-
-axp209: pmic@34 {
-	compatible = "x-powers,axp209";
-	reg = <0x34>;
-	interrupt-parent = <&nmi_intc>;
-	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	regulators {
-		x-powers,dcdc-freq = <1500>;
-
-		vdd_cpu: dcdc2 {
-			regulator-always-on;
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1450000>;
-			regulator-name = "vdd-cpu";
-		};
-
-		vdd_int_dll: dcdc3 {
-			regulator-always-on;
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-name = "vdd-int-dll";
-		};
-
-		vdd_rtc: ldo1 {
-			regulator-always-on;
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-name = "vdd-rtc";
-		};
-
-		avcc: ldo2 {
-			regulator-always-on;
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-name = "avcc";
-		};
-
-		ldo3 {
-			/* unused but preferred to be managed by OS */
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
deleted file mode 100644
index 8c4678650d1a..000000000000
--- a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-* ROHM BD9571MWV Power Management Integrated Circuit (PMIC) bindings
-
-Required properties:
- - compatible		: Should be "rohm,bd9571mwv".
- - reg			: I2C slave address.
- - interrupts		: The interrupt line the device is connected to.
- - interrupt-controller	: Marks the device node as an interrupt controller.
- - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
-			    The first cell is the IRQ number.
-			    The second cell is the flags, encoded as trigger
-			    masks from ../interrupt-controller/interrupts.txt.
- - gpio-controller      : Marks the device node as a GPIO Controller.
- - #gpio-cells          : Should be two.  The first cell is the pin number and
-                            the second cell is used to specify flags.
-                            See ../gpio/gpio.txt for more information.
- - regulators:          : List of child nodes that specify the regulator
-                            initialization data. Child nodes must be named
-                            after their hardware counterparts:
-			     - vd09
-			     - vd18
-			     - vd25
-			     - vd33
-			     - dvfs
-			    Each child node is defined using the standard
-			    binding for regulators.
-
-Optional properties:
-  - rohm,ddr-backup-power : Value to use for DDR-Backup Power (default 0).
-			    This is a bitmask that specifies which DDR power
-			    rails need to be kept powered when backup mode is
-			    entered, for system suspend:
-			      - bit 0: DDR0
-			      - bit 1: DDR1
-			      - bit 2: DDR0C
-			      - bit 3: DDR1C
-			    These bits match the KEEPON_DDR* bits in the
-			    documentation for the "BKUP Mode Cnt" register.
-  - rohm,rstbmode-level: The RSTB signal is configured for level mode, to
-			 accommodate a toggle power switch (the RSTBMODE pin is
-			 strapped low).
-  - rohm,rstbmode-pulse: The RSTB signal is configured for pulse mode, to
-			 accommodate a momentary power switch (the RSTBMODE pin
-			 is strapped high).
-			 The two properties above are mutually exclusive.
-
-Example:
-
-	pmic: pmic@30 {
-		compatible = "rohm,bd9571mwv";
-		reg = <0x30>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		rohm,ddr-backup-power = <0xf>;
-		rohm,rstbmode-pulse;
-
-		regulators {
-			dvfs: dvfs {
-				regulator-name = "dvfs";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1030000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
new file mode 100644
index 000000000000..148f1da47603
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6318-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6318 GPIO System Controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Broadcom BCM6318 SoC GPIO system controller which provides a register map
+  for controlling the GPIO and pins of the SoC.
+
+properties:
+  "#address-cells": true
+
+  "#size-cells": true
+
+  compatible:
+    items:
+      - const: brcm,bcm6318-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    description:
+      GPIO controller for the SoC GPIOs. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+
+  "^pinctrl@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml"
+    description:
+      Pin controller for the SoC pins. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml.
+
+required:
+  - "#address-cells"
+  - compatible
+  - ranges
+  - reg
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@10000080 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      compatible = "brcm,bcm6318-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0x10000080 0x80>;
+      ranges = <0 0x10000080 0x80>;
+
+      gpio@0 {
+        compatible = "brcm,bcm6318-gpio";
+        reg-names = "dirout", "dat";
+        reg = <0x0 0x8>, <0x8 0x8>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 50>;
+        #gpio-cells = <2>;
+      };
+
+      pinctrl: pinctrl@10 {
+        compatible = "brcm,bcm6318-pinctrl";
+        reg = <0x18 0x10>, <0x54 0x18>;
+
+        pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
+          function = "ephy0_spd_led";
+          pins = "gpio0";
+        };
+
+        pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
+          function = "ephy1_spd_led";
+          pins = "gpio1";
+        };
+
+        pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
+          function = "ephy2_spd_led";
+          pins = "gpio2";
+        };
+
+        pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
+          function = "ephy3_spd_led";
+          pins = "gpio3";
+        };
+
+        pinctrl_ephy0_act_led: ephy0_act_led-pins {
+          function = "ephy0_act_led";
+          pins = "gpio4";
+        };
+
+        pinctrl_ephy1_act_led: ephy1_act_led-pins {
+          function = "ephy1_act_led";
+          pins = "gpio5";
+        };
+
+        pinctrl_ephy2_act_led: ephy2_act_led-pins {
+          function = "ephy2_act_led";
+          pins = "gpio6";
+        };
+
+        pinctrl_ephy3_act_led: ephy3_act_led-pins {
+          function = "ephy3_act_led";
+          pins = "gpio7";
+        };
+
+        pinctrl_serial_led: serial_led-pins {
+          pinctrl_serial_led_data: serial_led_data-pins {
+            function = "serial_led_data";
+            pins = "gpio6";
+          };
+
+          pinctrl_serial_led_clk: serial_led_clk-pins {
+            function = "serial_led_clk";
+            pins = "gpio7";
+          };
+        };
+
+        pinctrl_inet_act_led: inet_act_led-pins {
+          function = "inet_act_led";
+          pins = "gpio8";
+        };
+
+        pinctrl_inet_fail_led: inet_fail_led-pins {
+          function = "inet_fail_led";
+          pins = "gpio9";
+        };
+
+        pinctrl_dsl_led: dsl_led-pins {
+          function = "dsl_led";
+          pins = "gpio10";
+        };
+
+        pinctrl_post_fail_led: post_fail_led-pins {
+          function = "post_fail_led";
+          pins = "gpio11";
+        };
+
+        pinctrl_wlan_wps_led: wlan_wps_led-pins {
+          function = "wlan_wps_led";
+          pins = "gpio12";
+        };
+
+        pinctrl_usb_pwron: usb_pwron-pins {
+          function = "usb_pwron";
+          pins = "gpio13";
+        };
+
+        pinctrl_usb_device_led: usb_device_led-pins {
+          function = "usb_device_led";
+          pins = "gpio13";
+        };
+
+        pinctrl_usb_active: usb_active-pins {
+          function = "usb_active";
+          pins = "gpio40";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
new file mode 100644
index 000000000000..7e582243ea76
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm63268-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63268 GPIO System Controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Broadcom BCM63268 SoC GPIO system controller which provides a register map
+  for controlling the GPIO and pins of the SoC.
+
+properties:
+  "#address-cells": true
+
+  "#size-cells": true
+
+  compatible:
+    items:
+      - const: brcm,bcm63268-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    description:
+      GPIO controller for the SoC GPIOs. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+
+  "^pinctrl@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: "../pinctrl/brcm,bcm63268-pinctrl.yaml"
+    description:
+      Pin controller for the SoC pins. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml.
+
+required:
+  - "#address-cells"
+  - compatible
+  - ranges
+  - reg
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@100000c0 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      compatible = "brcm,bcm63268-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0x100000c0 0x80>;
+      ranges = <0 0x100000c0 0x80>;
+
+      gpio@0 {
+        compatible = "brcm,bcm63268-gpio";
+        reg-names = "dirout", "dat";
+        reg = <0x0 0x8>, <0x8 0x8>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 52>;
+        #gpio-cells = <2>;
+      };
+
+      pinctrl: pinctrl@10 {
+        compatible = "brcm,bcm63268-pinctrl";
+        reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>;
+
+        pinctrl_serial_led: serial_led-pins {
+          pinctrl_serial_led_clk: serial_led_clk-pins {
+            function = "serial_led_clk";
+            pins = "gpio0";
+          };
+
+          pinctrl_serial_led_data: serial_led_data-pins {
+            function = "serial_led_data";
+            pins = "gpio1";
+          };
+        };
+
+        pinctrl_hsspi_cs4: hsspi_cs4-pins {
+          function = "hsspi_cs4";
+          pins = "gpio16";
+        };
+
+        pinctrl_hsspi_cs5: hsspi_cs5-pins {
+          function = "hsspi_cs5";
+          pins = "gpio17";
+        };
+
+        pinctrl_hsspi_cs6: hsspi_cs6-pins {
+          function = "hsspi_cs6";
+          pins = "gpio8";
+        };
+
+        pinctrl_hsspi_cs7: hsspi_cs7-pins {
+          function = "hsspi_cs7";
+          pins = "gpio9";
+        };
+
+        pinctrl_adsl_spi: adsl_spi-pins {
+          pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
+            function = "adsl_spi_miso";
+            pins = "gpio18";
+          };
+
+          pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
+            function = "adsl_spi_mosi";
+            pins = "gpio19";
+          };
+        };
+
+        pinctrl_vreq_clk: vreq_clk-pins {
+          function = "vreq_clk";
+          pins = "gpio22";
+        };
+
+        pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins {
+          function = "pcie_clkreq_b";
+          pins = "gpio23";
+        };
+
+        pinctrl_robosw_led_clk: robosw_led_clk-pins {
+          function = "robosw_led_clk";
+          pins = "gpio30";
+        };
+
+        pinctrl_robosw_led_data: robosw_led_data-pins {
+          function = "robosw_led_data";
+          pins = "gpio31";
+        };
+
+        pinctrl_nand: nand-pins {
+          function = "nand";
+          group = "nand_grp";
+        };
+
+        pinctrl_gpio35_alt: gpio35_alt-pins {
+          function = "gpio35_alt";
+          pin = "gpio35";
+        };
+
+        pinctrl_dectpd: dectpd-pins {
+          function = "dectpd";
+          group = "dectpd_grp";
+        };
+
+        pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins {
+          function = "vdsl_phy_override_0";
+          group = "vdsl_phy_override_0_grp";
+        };
+
+        pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins {
+          function = "vdsl_phy_override_1";
+          group = "vdsl_phy_override_1_grp";
+        };
+
+        pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins {
+          function = "vdsl_phy_override_2";
+          group = "vdsl_phy_override_2_grp";
+        };
+
+        pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins {
+          function = "vdsl_phy_override_3";
+          group = "vdsl_phy_override_3_grp";
+        };
+
+        pinctrl_dsl_gpio8: dsl_gpio8-pins {
+          function = "dsl_gpio8";
+          group = "dsl_gpio8";
+        };
+
+        pinctrl_dsl_gpio9: dsl_gpio9-pins {
+          function = "dsl_gpio9";
+          group = "dsl_gpio9";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
new file mode 100644
index 000000000000..2230848e11c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6328-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6328 GPIO System Controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Broadcom BCM6328 SoC GPIO system controller which provides a register map
+  for controlling the GPIO and pins of the SoC.
+
+properties:
+  "#address-cells": true
+
+  "#size-cells": true
+
+  compatible:
+    items:
+      - const: brcm,bcm6328-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    description:
+      GPIO controller for the SoC GPIOs. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+
+  "^pinctrl@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: "../pinctrl/brcm,bcm6328-pinctrl.yaml"
+    description:
+      Pin controller for the SoC pins. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml.
+
+required:
+  - "#address-cells"
+  - compatible
+  - ranges
+  - reg
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@10000080 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      compatible = "brcm,bcm6328-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0x10000080 0x80>;
+      ranges = <0 0x10000080 0x80>;
+
+      gpio@0 {
+        compatible = "brcm,bcm6328-gpio";
+        reg-names = "dirout", "dat";
+        reg = <0x0 0x8>, <0x8 0x8>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 32>;
+        #gpio-cells = <2>;
+      };
+
+      pinctrl: pinctrl@18 {
+        compatible = "brcm,bcm6328-pinctrl";
+        reg = <0x18 0x10>;
+
+        pinctrl_serial_led: serial_led-pins {
+          pinctrl_serial_led_data: serial_led_data-pins {
+            function = "serial_led_data";
+            pins = "gpio6";
+          };
+
+          pinctrl_serial_led_clk: serial_led_clk-pins {
+            function = "serial_led_clk";
+            pins = "gpio7";
+          };
+        };
+
+        pinctrl_inet_act_led: inet_act_led-pins {
+          function = "inet_act_led";
+          pins = "gpio11";
+        };
+
+        pinctrl_pcie_clkreq: pcie_clkreq-pins {
+          function = "pcie_clkreq";
+          pins = "gpio16";
+        };
+
+        pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
+          function = "led";
+          pins = "gpio17";
+        };
+
+        pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
+          function = "led";
+          pins = "gpio18";
+        };
+
+        pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
+          function = "led";
+          pins = "gpio19";
+        };
+
+        pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
+          function = "led";
+          pins = "gpio20";
+        };
+
+        pinctrl_ephy0_act_led: ephy0_act_led-pins {
+          function = "ephy0_act_led";
+          pins = "gpio25";
+        };
+
+        pinctrl_ephy1_act_led: ephy1_act_led-pins {
+          function = "ephy1_act_led";
+          pins = "gpio26";
+        };
+
+        pinctrl_ephy2_act_led: ephy2_act_led-pins {
+          function = "ephy2_act_led";
+          pins = "gpio27";
+        };
+
+        pinctrl_ephy3_act_led: ephy3_act_led-pins {
+          function = "ephy3_act_led";
+          pins = "gpio28";
+        };
+
+        pinctrl_hsspi_cs1: hsspi_cs1-pins {
+          function = "hsspi_cs1";
+          pins = "hsspi_cs1";
+        };
+
+        pinctrl_usb_port1_device: usb_port1_device-pins {
+          function = "usb_device_port";
+          pins = "usb_port1";
+        };
+
+        pinctrl_usb_port1_host: usb_port1_host-pins {
+          function = "usb_host_port";
+          pins = "usb_port1";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
new file mode 100644
index 000000000000..c06693b6f7aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6358-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6358 GPIO System Controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Broadcom BCM6358 SoC GPIO system controller which provides a register map
+  for controlling the GPIO and pins of the SoC.
+
+properties:
+  "#address-cells": true
+
+  "#size-cells": true
+
+  compatible:
+    items:
+      - const: brcm,bcm6358-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    description:
+      GPIO controller for the SoC GPIOs. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+
+  "^pinctrl@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: "../pinctrl/brcm,bcm6358-pinctrl.yaml"
+    description:
+      Pin controller for the SoC pins. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml.
+
+required:
+  - "#address-cells"
+  - compatible
+  - ranges
+  - reg
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@fffe0080 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      compatible = "brcm,bcm6358-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0xfffe0080 0x80>;
+      ranges = <0 0xfffe0080 0x80>;
+
+      gpio@0 {
+        compatible = "brcm,bcm6358-gpio";
+        reg-names = "dirout", "dat";
+        reg = <0x0 0x8>, <0x8 0x8>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 40>;
+        #gpio-cells = <2>;
+      };
+
+      pinctrl: pinctrl@18 {
+        compatible = "brcm,bcm6358-pinctrl";
+        reg = <0x18 0x4>;
+
+        pinctrl_ebi_cs: ebi_cs-pins {
+          function = "ebi_cs";
+          groups = "ebi_cs_grp";
+        };
+
+        pinctrl_uart1: uart1-pins {
+          function = "uart1";
+          groups = "uart1_grp";
+        };
+
+        pinctrl_serial_led: serial_led-pins {
+          function = "serial_led";
+          groups = "serial_led_grp";
+        };
+
+        pinctrl_legacy_led: legacy_led-pins {
+          function = "legacy_led";
+          groups = "legacy_led_grp";
+        };
+
+        pinctrl_led: led-pins {
+          function = "led";
+          groups = "led_grp";
+        };
+
+        pinctrl_spi_cs_23: spi_cs-pins {
+          function = "spi_cs";
+          groups = "spi_cs_grp";
+        };
+
+        pinctrl_utopia: utopia-pins {
+          function = "utopia";
+          groups = "utopia_grp";
+        };
+
+        pinctrl_pwm_syn_clk: pwm_syn_clk-pins {
+          function = "pwm_syn_clk";
+          groups = "pwm_syn_clk_grp";
+        };
+
+        pinctrl_sys_irq: sys_irq-pins {
+          function = "sys_irq";
+          groups = "sys_irq_grp";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
new file mode 100644
index 000000000000..c560bede0e37
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6362-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6362 GPIO System Controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Broadcom BCM6362 SoC GPIO system controller which provides a register map
+  for controlling the GPIO and pins of the SoC.
+
+properties:
+  "#address-cells": true
+
+  "#size-cells": true
+
+  compatible:
+    items:
+      - const: brcm,bcm6362-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    description:
+      GPIO controller for the SoC GPIOs. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+
+  "^pinctrl@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: "../pinctrl/brcm,bcm6362-pinctrl.yaml"
+    description:
+      Pin controller for the SoC pins. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml.
+
+required:
+  - "#address-cells"
+  - compatible
+  - ranges
+  - reg
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@10000080 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      compatible = "brcm,bcm6362-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0x10000080 0x80>;
+      ranges = <0 0x10000080 0x80>;
+
+      gpio@0 {
+        compatible = "brcm,bcm6362-gpio";
+        reg-names = "dirout", "dat";
+        reg = <0x0 0x8>, <0x8 0x8>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 48>;
+        #gpio-cells = <2>;
+      };
+
+      pinctrl: pinctrl@18 {
+        compatible = "brcm,bcm6362-pinctrl";
+        reg = <0x18 0x10>, <0x38 0x4>;
+
+        pinctrl_usb_device_led: usb_device_led-pins {
+          function = "usb_device_led";
+          pins = "gpio0";
+        };
+
+        pinctrl_sys_irq: sys_irq-pins {
+          function = "sys_irq";
+          pins = "gpio1";
+        };
+
+        pinctrl_serial_led: serial_led-pins {
+          pinctrl_serial_led_clk: serial_led_clk-pins {
+            function = "serial_led_clk";
+            pins = "gpio2";
+          };
+
+          pinctrl_serial_led_data: serial_led_data-pins {
+            function = "serial_led_data";
+            pins = "gpio3";
+          };
+        };
+
+        pinctrl_robosw_led_data: robosw_led_data-pins {
+          function = "robosw_led_data";
+          pins = "gpio4";
+        };
+
+        pinctrl_robosw_led_clk: robosw_led_clk-pins {
+          function = "robosw_led_clk";
+          pins = "gpio5";
+        };
+
+        pinctrl_robosw_led0: robosw_led0-pins {
+          function = "robosw_led0";
+          pins = "gpio6";
+        };
+
+        pinctrl_robosw_led1: robosw_led1-pins {
+          function = "robosw_led1";
+          pins = "gpio7";
+        };
+
+        pinctrl_inet_led: inet_led-pins {
+          function = "inet_led";
+          pins = "gpio8";
+        };
+
+        pinctrl_spi_cs2: spi_cs2-pins {
+          function = "spi_cs2";
+          pins = "gpio9";
+        };
+
+        pinctrl_spi_cs3: spi_cs3-pins {
+          function = "spi_cs3";
+          pins = "gpio10";
+        };
+
+        pinctrl_ntr_pulse: ntr_pulse-pins {
+          function = "ntr_pulse";
+          pins = "gpio11";
+        };
+
+        pinctrl_uart1_scts: uart1_scts-pins {
+          function = "uart1_scts";
+          pins = "gpio12";
+        };
+
+        pinctrl_uart1_srts: uart1_srts-pins {
+          function = "uart1_srts";
+          pins = "gpio13";
+        };
+
+        pinctrl_uart1: uart1-pins {
+          pinctrl_uart1_sdin: uart1_sdin-pins {
+            function = "uart1_sdin";
+            pins = "gpio14";
+          };
+
+          pinctrl_uart1_sdout: uart1_sdout-pins {
+            function = "uart1_sdout";
+            pins = "gpio15";
+          };
+        };
+
+        pinctrl_adsl_spi: adsl_spi-pins {
+          pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
+            function = "adsl_spi_miso";
+            pins = "gpio16";
+          };
+
+          pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
+            function = "adsl_spi_mosi";
+            pins = "gpio17";
+          };
+
+          pinctrl_adsl_spi_clk: adsl_spi_clk-pins {
+            function = "adsl_spi_clk";
+            pins = "gpio18";
+          };
+
+          pinctrl_adsl_spi_cs: adsl_spi_cs-pins {
+            function = "adsl_spi_cs";
+            pins = "gpio19";
+          };
+        };
+
+        pinctrl_ephy0_led: ephy0_led-pins {
+          function = "ephy0_led";
+          pins = "gpio20";
+        };
+
+        pinctrl_ephy1_led: ephy1_led-pins {
+          function = "ephy1_led";
+          pins = "gpio21";
+        };
+
+        pinctrl_ephy2_led: ephy2_led-pins {
+          function = "ephy2_led";
+          pins = "gpio22";
+        };
+
+        pinctrl_ephy3_led: ephy3_led-pins {
+          function = "ephy3_led";
+          pins = "gpio23";
+        };
+
+        pinctrl_ext_irq0: ext_irq0-pins {
+          function = "ext_irq0";
+          pins = "gpio24";
+        };
+
+        pinctrl_ext_irq1: ext_irq1-pins {
+          function = "ext_irq1";
+          pins = "gpio25";
+        };
+
+        pinctrl_ext_irq2: ext_irq2-pins {
+          function = "ext_irq2";
+          pins = "gpio26";
+        };
+
+        pinctrl_ext_irq3: ext_irq3-pins {
+          function = "ext_irq3";
+          pins = "gpio27";
+        };
+
+        pinctrl_nand: nand-pins {
+          function = "nand";
+          group = "nand_grp";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
new file mode 100644
index 000000000000..c534f5f2404e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
@@ -0,0 +1,246 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6368-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6368 GPIO System Controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Broadcom BCM6368 SoC GPIO system controller which provides a register map
+  for controlling the GPIO and pins of the SoC.
+
+properties:
+  "#address-cells": true
+
+  "#size-cells": true
+
+  compatible:
+    items:
+      - const: brcm,bcm6368-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    description:
+      GPIO controller for the SoC GPIOs. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+
+  "^pinctrl@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: "../pinctrl/brcm,bcm6368-pinctrl.yaml"
+    description:
+      Pin controller for the SoC pins. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml.
+
+required:
+  - "#address-cells"
+  - compatible
+  - ranges
+  - reg
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@10000080 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      compatible = "brcm,bcm6368-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0x10000080 0x80>;
+      ranges = <0 0x10000080 0x80>;
+
+      gpio@0 {
+        compatible = "brcm,bcm6368-gpio";
+        reg-names = "dirout", "dat";
+        reg = <0x0 0x8>, <0x8 0x8>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 38>;
+        #gpio-cells = <2>;
+      };
+
+      pinctrl: pinctrl@18 {
+        compatible = "brcm,bcm6368-pinctrl";
+        reg = <0x18 0x4>, <0x38 0x4>;
+
+        pinctrl_analog_afe_0: analog_afe_0-pins {
+          function = "analog_afe_0";
+          pins = "gpio0";
+        };
+
+        pinctrl_analog_afe_1: analog_afe_1-pins {
+          function = "analog_afe_1";
+          pins = "gpio1";
+        };
+
+        pinctrl_sys_irq: sys_irq-pins {
+          function = "sys_irq";
+          pins = "gpio2";
+        };
+
+        pinctrl_serial_led: serial_led-pins {
+          pinctrl_serial_led_data: serial_led_data-pins {
+            function = "serial_led_data";
+            pins = "gpio3";
+          };
+
+          pinctrl_serial_led_clk: serial_led_clk-pins {
+            function = "serial_led_clk";
+            pins = "gpio4";
+          };
+        };
+
+        pinctrl_inet_led: inet_led-pins {
+          function = "inet_led";
+          pins = "gpio5";
+        };
+
+        pinctrl_ephy0_led: ephy0_led-pins {
+          function = "ephy0_led";
+          pins = "gpio6";
+        };
+
+        pinctrl_ephy1_led: ephy1_led-pins {
+          function = "ephy1_led";
+          pins = "gpio7";
+        };
+
+        pinctrl_ephy2_led: ephy2_led-pins {
+          function = "ephy2_led";
+          pins = "gpio8";
+        };
+
+        pinctrl_ephy3_led: ephy3_led-pins {
+          function = "ephy3_led";
+          pins = "gpio9";
+        };
+
+        pinctrl_robosw_led_data: robosw_led_data-pins {
+          function = "robosw_led_data";
+          pins = "gpio10";
+        };
+
+        pinctrl_robosw_led_clk: robosw_led_clk-pins {
+          function = "robosw_led_clk";
+          pins = "gpio11";
+        };
+
+        pinctrl_robosw_led0: robosw_led0-pins {
+          function = "robosw_led0";
+          pins = "gpio12";
+        };
+
+        pinctrl_robosw_led1: robosw_led1-pins {
+          function = "robosw_led1";
+          pins = "gpio13";
+        };
+
+        pinctrl_usb_device_led: usb_device_led-pins {
+          function = "usb_device_led";
+          pins = "gpio14";
+        };
+
+        pinctrl_pci: pci-pins {
+          pinctrl_pci_req1: pci_req1-pins {
+            function = "pci_req1";
+            pins = "gpio16";
+          };
+
+          pinctrl_pci_gnt1: pci_gnt1-pins {
+            function = "pci_gnt1";
+            pins = "gpio17";
+          };
+
+          pinctrl_pci_intb: pci_intb-pins {
+            function = "pci_intb";
+            pins = "gpio18";
+          };
+
+          pinctrl_pci_req0: pci_req0-pins {
+            function = "pci_req0";
+            pins = "gpio19";
+          };
+
+          pinctrl_pci_gnt0: pci_gnt0-pins {
+            function = "pci_gnt0";
+            pins = "gpio20";
+          };
+        };
+
+        pinctrl_pcmcia: pcmcia-pins {
+          pinctrl_pcmcia_cd1: pcmcia_cd1-pins {
+            function = "pcmcia_cd1";
+            pins = "gpio22";
+          };
+
+          pinctrl_pcmcia_cd2: pcmcia_cd2-pins {
+            function = "pcmcia_cd2";
+            pins = "gpio23";
+          };
+
+          pinctrl_pcmcia_vs1: pcmcia_vs1-pins {
+            function = "pcmcia_vs1";
+            pins = "gpio24";
+          };
+
+          pinctrl_pcmcia_vs2: pcmcia_vs2-pins {
+            function = "pcmcia_vs2";
+            pins = "gpio25";
+          };
+        };
+
+        pinctrl_ebi_cs2: ebi_cs2-pins {
+          function = "ebi_cs2";
+          pins = "gpio26";
+        };
+
+        pinctrl_ebi_cs3: ebi_cs3-pins {
+          function = "ebi_cs3";
+          pins = "gpio27";
+        };
+
+        pinctrl_spi_cs2: spi_cs2-pins {
+          function = "spi_cs2";
+          pins = "gpio28";
+        };
+
+        pinctrl_spi_cs3: spi_cs3-pins {
+          function = "spi_cs3";
+          pins = "gpio29";
+        };
+
+        pinctrl_spi_cs4: spi_cs4-pins {
+          function = "spi_cs4";
+          pins = "gpio30";
+        };
+
+        pinctrl_spi_cs5: spi_cs5-pins {
+          function = "spi_cs5";
+          pins = "gpio31";
+        };
+
+        pinctrl_uart1: uart1-pins {
+          function = "uart1";
+          group = "uart1_grp";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
new file mode 100644
index 000000000000..b85819fbb07c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom CRU
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Broadcom CRU ("Clock and Reset Unit" or "Central Resource Unit") is a hardware
+  block grouping smaller blocks. On Broadcom Northstar platform it contains e.g.
+  clocks, pinctrl, USB PHY and thermal.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,ns-cru
+      - const: simple-mfd
+
+  reg:
+    description: CRU registers
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  '^clock-controller@[a-f0-9]+$':
+    $ref: ../clock/brcm,iproc-clocks.yaml
+
+  '^phy@[a-f0-9]+$':
+    $ref: ../phy/bcm-ns-usb2-phy.yaml
+
+  '^pinctrl@[a-f0-9]+$':
+    $ref: ../pinctrl/brcm,ns-pinmux.yaml
+
+  '^syscon@[a-f0-9]+$':
+    $ref: syscon.yaml
+
+  '^thermal@[a-f0-9]+$':
+    $ref: ../thermal/brcm,ns-thermal.yaml
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm-nsp.h>
+    cru-bus@1800c100 {
+        compatible = "brcm,ns-cru", "simple-mfd";
+        reg = <0x1800c100 0x1d0>;
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        clock-controller@100 {
+            #clock-cells = <1>;
+            compatible = "brcm,nsp-lcpll0";
+            reg = <0x100 0x14>;
+            clocks = <&osc>;
+            clock-output-names = "lcpll0", "pcie_phy", "sdio", "ddr_phy";
+        };
+
+        clock-controller@140 {
+            #clock-cells = <1>;
+            compatible = "brcm,nsp-genpll";
+            reg = <0x140 0x24>;
+            clocks = <&osc>;
+            clock-output-names = "genpll", "phy", "ethernetclk", "usbclk",
+                                 "iprocfast", "sata1", "sata2";
+        };
+
+        phy@164 {
+            compatible = "brcm,ns-usb2-phy";
+            reg = <0x164 0x4>;
+            brcm,syscon-clkset = <&clkset>;
+            clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+            clock-names = "phy-ref-clk";
+            #phy-cells = <0>;
+        };
+
+        clkset: syscon@180 {
+            compatible = "brcm,cru-clkset", "syscon";
+            reg = <0x180 0x4>;
+        };
+
+        pinctrl@1c0 {
+            compatible = "brcm,bcm4708-pinmux";
+            reg = <0x1c0 0x24>;
+            reg-names = "cru_gpio_control";
+        };
+
+        thermal@2c0 {
+            compatible = "brcm,ns-thermal";
+            reg = <0x2c0 0x10>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,misc.yaml b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml
new file mode 100644
index 000000000000..cff7d772a7db
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's MISC block
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Broadcom's MISC is a hardware block used on some SoCs (e.g. bcm63xx and
+  bcm4908). It's used to implement some simple functions like a watchdog, PCIe
+  reset, UniMAC control and more.
+
+properties:
+  compatible:
+    items:
+      - const: brcm,misc
+      - const: simple-mfd
+
+  reg:
+    description: MISC block registers
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  '^reset-controller@[a-f0-9]+$':
+    $ref: ../reset/brcm,bcm4908-misc-pcie-reset.yaml
+
+additionalProperties: false
+
+required:
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    misc@ff802600 {
+        compatible = "brcm,misc", "simple-mfd";
+        reg = <0xff802600 0xe4>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x0 0xe4>;
+
+        reset-controller@44 {
+            compatible = "brcm,bcm4908-misc-pcie-reset";
+            reg = <0x44 0x4>;
+            #reset-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,twd.yaml b/Documentation/devicetree/bindings/mfd/brcm,twd.yaml
new file mode 100644
index 000000000000..634526f790b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,twd.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,twd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's Timer-Watchdog (aka TWD)
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Broadcom has a Timer-Watchdog block used in multiple SoCs (e.g., BCM4908,
+  BCM63xx, BCM7038). There are few variants available (they differ slightly in
+  registers layout). This block consists of: timers, watchdog and optionally a
+  software reset handler.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm4908-twd
+          - brcm,bcm7038-twd
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  '^watchdog@[a-f0-9]+$':
+    $ref: /schemas/watchdog/brcm,bcm7038-wdt.yaml
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    timer-mfd@ff800400 {
+        compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+        reg = <0xff800400 0x4c>;
+        ranges = <0x00000000 0xff800400 0x4c>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        watchdog@28 {
+            compatible = "brcm,bcm7038-wdt";
+            reg = <0x28 0x8>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
new file mode 100644
index 000000000000..e2046f07a40e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/canaan,k210-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 System Controller
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description:
+  Canaan Inc. Kendryte K210 SoC system controller which provides a
+  register map for controlling the clocks, reset signals and pin power
+  domains of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: canaan,k210-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  clocks:
+    maxItems: 1
+    description:
+      System controller Advanced Power Bus (APB) interface clock source.
+
+  clock-names:
+    items:
+      - const: pclk
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    # Child node
+    type: object
+    $ref: "../clock/canaan,k210-clk.yaml"
+    description:
+      Clock controller for the SoC clocks. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml.
+
+  reset-controller:
+    # Child node
+    type: object
+    $ref: "../reset/canaan,k210-rst.yaml"
+    description:
+      Reset controller for the SoC. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml.
+
+  syscon-reboot:
+    # Child node
+    type: object
+    $ref: "../power/reset/syscon-reboot.yaml"
+    description:
+      Reboot method for the SoC. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml.
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - clock-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    #include <dt-bindings/reset/k210-rst.h>
+
+    clocks {
+      in0: oscllator {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <26000000>;
+      };
+    };
+
+    sysctl: syscon@50440000 {
+      compatible = "canaan,k210-sysctl",
+                   "syscon", "simple-mfd";
+      reg = <0x50440000 0x100>;
+      clocks = <&sysclk K210_CLK_APB1>;
+      clock-names = "pclk";
+
+      sysclk: clock-controller {
+        #clock-cells = <1>;
+        compatible = "canaan,k210-clk";
+        clocks = <&in0>;
+      };
+
+      sysrst: reset-controller {
+        compatible = "canaan,k210-rst";
+        #reset-cells = <1>;
+      };
+
+      reboot: syscon-reboot {
+        compatible = "syscon-reboot";
+        regmap = <&sysctl>;
+        offset = <48>;
+        mask = <1>;
+        value = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
deleted file mode 100644
index 3bf92ad37fa1..000000000000
--- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform.  Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-Also see these documents for generic binding information:
-  [1] GPIO : ../gpio/gpio.txt
-
-And these for relevant defines:
-  [2] include/dt-bindings/pinctrl/lochnagar.h
-  [3] include/dt-bindings/clock/lochnagar.h
-
-And these documents for the required sub-node binding details:
-  [4] Clock: ../clock/cirrus,lochnagar.txt
-  [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt
-  [6] Regulator: ../regulator/cirrus,lochnagar.txt
-  [7] Sound: ../sound/cirrus,lochnagar.txt
-  [8] Hardware Monitor: ../hwmon/cirrus,lochnagar.txt
-
-Required properties:
-
-  - compatible : One of the following strings:
-                 "cirrus,lochnagar1"
-                 "cirrus,lochnagar2"
-
-  - reg : I2C slave address
-
-  - reset-gpios : Reset line to the Lochnagar, see [1].
-
-Required sub-nodes:
-
-  - lochnagar-clk : Binding for the clocking components, see [4].
-
-  - lochnagar-pinctrl : Binding for the pin control components, see [5].
-
-Optional sub-nodes:
-
-  - Bindings for the regulator components, see [6]. Only available on
-    Lochnagar 2.
-
-  - lochnagar-sc : Binding for the sound card components, see [7].
-                   Only available on Lochnagar 2.
-  - lochnagar-hwmon : Binding for the hardware monitor components, see [8].
-                      Only available on Lochnagar 2.
-
-Optional properties:
-
-  - present-gpios : Host present line, indicating the presence of a
-    host system, see [1]. This can be omitted if the present line is
-    tied in hardware.
-
-Example:
-
-lochnagar: lochnagar@22 {
-	compatible = "cirrus,lochnagar2";
-	reg = <0x22>;
-
-	reset-gpios = <&gpio0 55 0>;
-	present-gpios = <&gpio0 60 0>;
-
-	lochnagar-clk {
-		compatible = "cirrus,lochnagar2-clk";
-		...
-	};
-
-	lochnagar-pinctrl {
-		compatible = "cirrus,lochnagar-pinctrl";
-		...
-	};
-
-	lochnagar-sc {
-		compatible = "cirrus,lochnagar2-soundcard";
-		...
-	};
-
-	lochnagar-hwmon {
-		compatible = "cirrus,lochnagar2-hwmon";
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
new file mode 100644
index 000000000000..ebbedabb2bd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
@@ -0,0 +1,365 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of
+  various application processor systems to provide a full evaluation
+  platform.  Audio system topology, clocking and power can all be
+  controlled through the Lochnagar, allowing the device under test
+  to be used in a variety of possible use cases.
+
+  Also see these documents for generic binding information:
+    [1] GPIO : ../gpio/gpio.txt
+
+  And these for relevant defines:
+    [2] include/dt-bindings/pinctrl/lochnagar.h
+    [3] include/dt-bindings/clock/lochnagar.h
+
+  And these documents for the required sub-node binding details:
+    [4] Clock: ../clock/cirrus,lochnagar.yaml
+    [5] Pinctrl: ../pinctrl/cirrus,lochnagar.yaml
+    [6] Sound: ../sound/cirrus,lochnagar.yaml
+    [7] Hardware Monitor: ../hwmon/cirrus,lochnagar.yaml
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - cirrus,lochnagar2
+    then:
+      properties:
+        lochnagar-hwmon:
+          type: object
+          $ref: /schemas/hwmon/cirrus,lochnagar.yaml#
+
+        lochnagar-sc:
+          type: object
+          $ref: /schemas/sound/cirrus,lochnagar.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar1
+      - cirrus,lochnagar2
+
+  reg:
+    const: 0x22
+
+  reset-gpios:
+    maxItems: 1
+
+  present-gpios:
+    description: |
+      Host present line, indicating the presence of a
+      host system, see [1]. This can be omitted if the present line is
+      tied in hardware.
+    maxItems: 1
+
+  lochnagar-clk:
+    type: object
+    $ref: /schemas/clock/cirrus,lochnagar.yaml#
+
+  lochnagar-pmic32k:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 32768
+
+  lochnagar-clk12m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 12288000
+
+  lochnagar-clk11m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 11298600
+
+  lochnagar-clk24m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 24576000
+
+  lochnagar-clk22m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 22579200
+
+  lochnagar-clk8m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 8192000
+
+  lochnagar-usb24m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 24576000
+
+  lochnagar-usb12m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 12288000
+
+  pinctrl:
+    type: object
+    $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
+
+  lochnagar-hwmon:
+    type: object
+    $ref: /schemas/hwmon/cirrus,lochnagar.yaml#
+
+  lochnagar-sc:
+    type: object
+    $ref: /schemas/sound/cirrus,lochnagar.yaml#
+
+  VDDCORE:
+    description:
+      Initialisation data for the VDDCORE regulator, which supplies the
+      CODECs digital core if not being provided by an internal regulator.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-vddcore
+
+      SYSVDD-supply:
+        description:
+          Primary power supply for the Lochnagar.
+    required:
+      - compatible
+
+  MICVDD:
+    description:
+      Initialisation data for the MICVDD regulator, which supplies the
+      CODECs MICVDD.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-micvdd
+
+      SYSVDD-supply:
+        description:
+          Primary power supply for the Lochnagar.
+    required:
+      - compatible
+
+  MIC1VDD:
+    description:
+      Initialisation data for the MIC1VDD supplies.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-mic1vdd
+
+      cirrus,micbias-input:
+        description:
+          A property selecting which of the CODEC minicard micbias outputs
+          should be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 4
+
+      MICBIAS1-supply:
+        description:
+          Regulator supplies for the MIC1VDD outputs, supplying the digital
+          microphones, normally supplied from the attached CODEC.
+    required:
+      - compatible
+
+  MIC2VDD:
+    description:
+      Initialisation data for the MIC2VDD supplies.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-mic2vdd
+
+      cirrus,micbias-input:
+        description:
+          A property selecting which of the CODEC minicard micbias outputs
+          should be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 4
+
+      MICBIAS2-supply:
+        description:
+          Regulator supplies for the MIC2VDD outputs, supplying the digital
+          microphones, normally supplied from the attached CODEC.
+    required:
+      - compatible
+
+  VDD1V8:
+    description:
+      Recommended fixed regulator for the VDD1V8 regulator, which supplies
+      the CODECs analog and 1.8V digital supplies.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        enum:
+          - regulator-fixed
+
+      regulator-min-microvolt:
+        const: 1800000
+
+      regulator-max-microvolt:
+        const: 1800000
+
+      vin-supply:
+        description:
+          Should be set to same supply as SYSVDD
+    required:
+      - compatible
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+      - regulator-boot-on
+      - regulator-always-on
+      - vin-supply
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - lochnagar-clk
+  - pinctrl
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lochnagar.h>
+    #include <dt-bindings/pinctrl/lochnagar.h>
+    i2c@e0004000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0004000 0x1000>;
+
+        lochnagar: lochnagar@22 {
+            compatible = "cirrus,lochnagar2";
+            reg = <0x22>;
+
+            reset-gpios = <&gpio0 55 0>;
+            present-gpios = <&gpio0 60 0>;
+
+            lochnagarclk: lochnagar-clk {
+                compatible = "cirrus,lochnagar2-clk";
+
+                #clock-cells = <1>;
+                clocks = <&clkaudio>, <&clkpmic>;
+                clock-names = "ln-gf-mclk2", "ln-pmic-32k";
+
+                assigned-clocks = <&lochnagarclk LOCHNAGAR_CDC_MCLK1>,
+                                  <&lochnagarclk LOCHNAGAR_CDC_MCLK2>;
+                assigned-clock-parents = <&clkaudio>, <&clkpmic>;
+            };
+
+            clkpmic: lochnagar-pmic32k {
+                compatible = "fixed-clock";
+                #clock-cells = <0>;
+                clock-frequency = <32768>;
+            };
+
+            pinctrl {
+                compatible = "cirrus,lochnagar-pinctrl";
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinsettings>;
+
+                pinsettings: pin-settings {
+                    ap2aif-pins {
+                        input-enable;
+                        groups = "gf-aif1";
+                        function = "codec-aif3";
+                    };
+                    codec2aif-pins {
+                        output-enable;
+                        groups = "codec-aif3";
+                        function = "gf-aif1";
+                    };
+                };
+            };
+
+            lochnagar-sc {
+                compatible = "cirrus,lochnagar2-soundcard";
+
+                #sound-dai-cells = <1>;
+
+                clocks = <&lochnagarclk LOCHNAGAR_SOUNDCARD_MCLK>;
+                clock-names = "mclk";
+            };
+
+            lochnagar-hwmon {
+                compatible = "cirrus,lochnagar2-hwmon";
+            };
+
+            MIC1VDD {
+                compatible = "cirrus,lochnagar2-mic1vdd";
+
+                cirrus,micbias-input = <3>;
+            };
+
+            MICVDD {
+                compatible = "cirrus,lochnagar2-micvdd";
+
+                SYSVDD-supply = <&wallvdd>;
+
+                regulator-min-microvolt = <3300000>;
+                regulator-max-microvolt = <3300000>;
+            };
+
+            VDD1V8 {
+                compatible = "regulator-fixed";
+
+                regulator-name = "VDD1V8";
+                regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <1800000>;
+                regulator-boot-on;
+                regulator-always-on;
+
+                vin-supply = <&wallvdd>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
new file mode 100644
index 000000000000..68c75a517c92
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
@@ -0,0 +1,297 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/cirrus,madera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Madera class audio CODECs Multi-Functional Device
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  These devices are audio SoCs with extensive digital capabilities and a range
+  of analogue I/O.
+
+  See also the child driver bindings in:
+
+    bindings/pinctrl/cirrus,madera.yaml
+    bindings/regulator/wlf,arizona.yaml
+    bindings/sound/cirrus,madera.yaml
+
+allOf:
+  - $ref: /schemas/pinctrl/cirrus,madera.yaml#
+  - $ref: /schemas/regulator/wlf,arizona.yaml#
+  - $ref: /schemas/sound/cirrus,madera.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l85
+              - wlf,wm1840
+    then:
+      properties:
+        SPKVDDL-supply:
+          description:
+            Left speaker driver power supply.
+
+        SPKVDDR-supply:
+          description:
+            Right speaker driver power supply.
+
+      required:
+        - SPKVDDL-supply
+        - SPKVDDR-supply
+    else:
+      required:
+        - DCVDD-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l15
+              - cirrus,cs47l35
+    then:
+      properties:
+        SPKVDD-supply:
+          description:
+            Mono speaker driver power supply.
+
+      required:
+        - SPKVDD-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l35
+              - cirrus,cs47l85
+              - cirrus,cs47l90
+              - cirrus,cs47l91
+              - wlf,wm1840
+    then:
+      properties:
+        DBVDD2-supply:
+          description:
+            Databus power supply.
+
+      required:
+        - DBVDD2-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l85
+              - cirrus,cs47l90
+              - cirrus,cs47l91
+              - wlf,wm1840
+    then:
+      properties:
+        DBVDD3-supply:
+          description:
+            Databus power supply.
+
+        DBVDD4-supply:
+          description:
+            Databus power supply.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l15
+    then:
+      required:
+        - MICVDD-supply
+    else:
+      properties:
+        CPVDD2-supply:
+          description:
+            Secondary charge pump power supply.
+
+      required:
+        - CPVDD2-supply
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs47l15
+      - cirrus,cs47l35
+      - cirrus,cs47l85
+      - cirrus,cs47l90
+      - cirrus,cs47l91
+      - cirrus,cs42l92
+      - cirrus,cs47l92
+      - cirrus,cs47l93
+      - cirrus,wm1840
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number. The second cell is reserved for
+      future use and must be zero
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      The first cell is the IRQ number.
+      The second cell is the flags, encoded as the trigger masks from
+      bindings/interrupt-controller/interrupts.txt
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      One entry specifying the GPIO controlling /RESET.  As defined in
+      bindings/gpio.txt.  Although optional, it is strongly recommended
+      to use a hardware reset.
+    maxItems: 1
+
+  clocks:
+    description:
+      Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3.
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    description: |
+      May contain up to three strings:
+        "mclk1" For the clock supplied on MCLK1, recommended to be a
+                high quality audio reference clock.
+        "mclk2" For the clock supplied on MCLK2, required to be an
+                always on 32k clock.
+        "mclk3" For the clock supplied on MCLK3.
+    oneOf:
+      - items:
+          - const: mclk1
+      - items:
+          - const: mclk2
+      - items:
+          - const: mclk3
+      - items:
+          - const: mclk1
+          - const: mclk2
+      - items:
+          - const: mclk1
+          - const: mclk3
+      - items:
+          - const: mclk2
+          - const: mclk3
+      - items:
+          - const: mclk1
+          - const: mclk2
+          - const: mclk3
+
+  AVDD-supply:
+    description:
+      Analogue power supply.
+
+  DBVDD1-supply:
+    description:
+      Databus power supply.
+
+  CPVDD1-supply:
+    description:
+      Charge pump power supply.
+
+  DCVDD-supply:
+    description:
+      Digital power supply, optional on CS47L85, WM1840 where it can
+      be supplied internally.
+
+  MICVDD-supply:
+    description:
+      Microphone power supply, normally supplied internally except on
+      cs47l24, wm1831 where it is mandatory.
+
+required:
+  - compatible
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+  - AVDD-supply
+  - DBVDD1-supply
+  - CPVDD1-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/madera.h>
+    i2c@e0004000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0004000 0x1000>;
+
+        cs47l85: codec@1a {
+            compatible = "cirrus,cs47l85";
+            reg = <0x1a>;
+
+            reset-gpios = <&gpio 0>;
+            wlf,ldoena = <&gpio 1>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <4 1 0>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            AVDD-supply = <&vdd1v8>;
+            DBVDD1-supply = <&vdd1v8>;
+            DBVDD2-supply = <&vdd1v8>;
+            DBVDD3-supply = <&vdd1v8>;
+            DBVDD4-supply = <&vdd1v8>;
+            CPVDD1-supply = <&vdd1v8>;
+            CPVDD2-supply = <&vdd1v2>;
+            SPKVDDL-supply = <&vdd5v>;
+            SPKVDDR-supply = <&vdd5v>;
+
+            clocks = <&clks 0>, <&clks 1>, <&clks 2>;
+            clock-names = "mclk1", "mclk2", "mclk3";
+
+            cirrus,dmic-ref = <0 0 MADERA_DMIC_REF_MICBIAS1>;
+            cirrus,inmode = <
+                MADERA_INMODE_SE   MADERA_INMODE_SE
+                MADERA_INMODE_SE   MADERA_INMODE_SE
+                MADERA_INMODE_DIFF MADERA_INMODE_DIFF
+            >;
+            cirrus,max-channels-clocked = <2 0 0>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinsettings>;
+
+            pinsettings: pin-settings {
+                aif1-pins {
+                    groups = "aif1";
+                    function = "aif1";
+                    bias-bus-hold;
+                };
+
+                aif2-pins {
+                    groups = "aif2";
+                    function = "aif2";
+                    bias-bus-hold;
+                };
+
+                aif3-pins {
+                    groups = "aif3";
+                    function = "aif3";
+                    bias-bus-hold;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
deleted file mode 100644
index 4860eabd0f72..000000000000
--- a/Documentation/devicetree/bindings/mfd/cros-ec.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-ChromeOS Embedded Controller
-
-Google's ChromeOS EC is a Cortex-M device which talks to the AP and
-implements various function such as keyboard and battery charging.
-
-The EC can be connect through various means (I2C, SPI, LPC, RPMSG) and the
-compatible string used depends on the interface. Each connection method has
-its own driver which connects to the top level interface-agnostic EC driver.
-Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to
-the top-level driver.
-
-Required properties (I2C):
-- compatible: "google,cros-ec-i2c"
-- reg: I2C slave address
-
-Required properties (SPI):
-- compatible: "google,cros-ec-spi"
-- reg: SPI chip select
-
-Required properties (RPMSG):
-- compatible: "google,cros-ec-rpmsg"
-
-Optional properties (SPI):
-- google,cros-ec-spi-pre-delay: Some implementations of the EC need a little
-  time to wake up from sleep before they can receive SPI transfers at a high
-  clock rate. This property specifies the delay, in usecs, between the
-  assertion of the CS to the start of the first clock pulse.
-- google,cros-ec-spi-msg-delay: Some implementations of the EC require some
-  additional processing time in order to accept new transactions. If the delay
-  between transactions is not long enough the EC may not be able to respond
-  properly to subsequent transactions and cause them to hang. This property
-  specifies the delay, in usecs, introduced between transactions to account
-  for the time required by the EC to get back into a state in which new data
-  can be accepted.
-
-Required properties (LPC):
-- compatible: "google,cros-ec-lpc"
-- reg: List of (IO address, size) pairs defining the interface uses
-
-Optional properties (all):
-- google,has-vbc-nvram: Some implementations of the EC include a small
-  nvram space used to store verified boot context data. This boolean flag
-  is used to specify whether this nvram is present or not.
-
-Example for I2C:
-
-i2c@12ca0000 {
-	cros-ec@1e {
-		reg = <0x1e>;
-		compatible = "google,cros-ec-i2c";
-		interrupts = <14 0>;
-		interrupt-parent = <&wakeup_eint>;
-		wakeup-source;
-	};
-
-
-Example for SPI:
-
-spi@131b0000 {
-	ec@0 {
-		compatible = "google,cros-ec-spi";
-		reg = <0x0>;
-		interrupts = <14 0>;
-		interrupt-parent = <&wakeup_eint>;
-		wakeup-source;
-		spi-max-frequency = <5000000>;
-		controller-data {
-		cs-gpio = <&gpf0 3 4 3 0>;
-		samsung,spi-cs;
-		samsung,spi-feedback-delay = <2>;
-		};
-	};
-};
-
-
-Example for LPC is not supplied as it is not yet implemented.
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index 857af982c88f..bab0d0e66cb3 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -1,8 +1,8 @@
 * Dialog DA9062 Power Management Integrated Circuit (PMIC)
 
 Product information for the DA9062 and DA9061 devices can be found here:
-- http://www.dialog-semiconductor.com/products/da9062
-- http://www.dialog-semiconductor.com/products/da9061
+- https://www.dialog-semiconductor.com/products/da9062
+- https://www.dialog-semiconductor.com/products/da9061
 
 The DA9062 PMIC consists of:
 
diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
deleted file mode 100644
index 8da879935c59..000000000000
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
-
-DA9093 consists of a large and varied group of sub-devices (I2C Only):
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9063-regulator        :               : LDOs & BUCKs
-da9063-onkey            :               : On Key
-da9063-rtc              :               : Real-Time Clock (DA9063 only)
-da9063-watchdog         :               : Watchdog
-
-======
-
-Required properties:
-
-- compatible : Should be "dlg,da9063" or "dlg,da9063l"
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
-  modified to match the chip's OTP settings).
-- interrupts : IRQ line information.
-- interrupt-controller
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
-  The DA9063(L) regulators are bound using their names listed below:
-
-    bcore1    : BUCK CORE1
-    bcore2    : BUCK CORE2
-    bpro      : BUCK PRO
-    bmem      : BUCK MEM
-    bio       : BUCK IO
-    bperi     : BUCK PERI
-    ldo1      : LDO_1	(DA9063 only)
-    ldo2      : LDO_2	(DA9063 only)
-    ldo3      : LDO_3
-    ldo4      : LDO_4	(DA9063 only)
-    ldo5      : LDO_5	(DA9063 only)
-    ldo6      : LDO_6	(DA9063 only)
-    ldo7      : LDO_7
-    ldo8      : LDO_8
-    ldo9      : LDO_9
-    ldo10     : LDO_10	(DA9063 only)
-    ldo11     : LDO_11
-
-  The component follows the standard regulator framework and the bindings
-  details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-- rtc : This node defines settings for the Real-Time Clock associated with
-  the DA9063 only. The RTC is not present in DA9063L. There are currently
-  no entries in this binding, however compatible = "dlg,da9063-rtc" should
-  be added if a node is created.
-
-- onkey : This node defines the OnKey settings for controlling the key
-  functionality of the device. The node should contain the compatible property
-  with the value "dlg,da9063-onkey".
-
-  Optional onkey properties:
-
-  - dlg,disable-key-power : Disable power-down using a long key-press. If this
-    entry exists the OnKey driver will remove support for the KEY_POWER key
-    press. If this entry does not exist then by default the key-press
-    triggered power down is enabled and the OnKey will support both KEY_POWER
-    and KEY_SLEEP.
-
-- watchdog : This node defines settings for the Watchdog timer associated
-  with the DA9063 and DA9063L. There are currently no entries in this
-  binding, however compatible = "dlg,da9063-watchdog" should be added
-  if a node is created.
-
-
-Example:
-
-	pmic0: da9063@58 {
-		compatible = "dlg,da9063"
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		wdt {
-			compatible = "dlg,da9063-watchdog";
-		};
-
-		onkey {
-			compatible = "dlg,da9063-onkey";
-			dlg,disable-key-power;
-		};
-
-		regulators {
-			DA9063_BCORE1: bcore1 {
-				regulator-name = "BCORE1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp = <500000>;
-				regulator-max-microamp = <2000000>;
-				regulator-boot-on;
-			};
-			DA9063_LDO11: ldo11 {
-				regulator-name = "LDO_11";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
new file mode 100644
index 000000000000..f6967c1f6235
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/delta,tn48m-cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Lattice CPLD onboard the TN48M switches is used for system
+  management.
+
+  It provides information about the hardware model, revision,
+  PSU status etc.
+
+  It is also being used as a GPIO expander and reset controller
+  for the switch MAC-s and other peripherals.
+
+properties:
+  compatible:
+    const: delta,tn48m-cpld
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "^gpio(@[0-9a-f]+)?$":
+    $ref: ../gpio/delta,tn48m-gpio.yaml
+
+  "^reset-controller?$":
+    $ref: ../reset/delta,tn48m-reset.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpld@41 {
+            compatible = "delta,tn48m-cpld";
+            reg = <0x41>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@31 {
+                compatible = "delta,tn48m-gpo";
+                reg = <0x31>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@3a {
+                compatible = "delta,tn48m-gpi";
+                reg = <0x3a>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@40 {
+                compatible = "delta,tn48m-gpi";
+                reg = <0x40>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            reset-controller {
+              compatible = "delta,tn48m-reset";
+              #reset-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
new file mode 100644
index 000000000000..e8e74e91070c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Steve Twiss <stwiss.opensource@diasemi.com>
+
+description: |
+  For device-tree bindings of other sub-modules refer to the binding documents
+  under the respective sub-system directories.
+
+properties:
+  compatible:
+    enum:
+      - dlg,da9063
+      - dlg,da9063l
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  dlg,use-sw-pm:
+    type: boolean
+    description:
+      Disable the watchdog during suspend.
+      Only use this option if you can't use the watchdog automatic suspend
+      function during a suspend (see register CONTROL_B).
+
+  watchdog:
+    type: object
+    $ref: /schemas/watchdog/watchdog.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        const: dlg,da9063-watchdog
+
+  rtc:
+    type: object
+    $ref: /schemas/rtc/rtc.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        const: dlg,da9063-rtc
+
+  onkey:
+    type: object
+    $ref: /schemas/input/input.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        const: dlg,da9063-onkey
+
+      dlg,disable-key-power:
+        type: boolean
+        description: |
+          Disable power-down using a long key-press.
+          If this entry does not exist then by default the key-press triggered
+          power down is enabled and the OnKey will support both KEY_POWER and
+          KEY_SLEEP.
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$":
+        $ref: /schemas/regulator/regulator.yaml
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@58 {
+        compatible = "dlg,da9063";
+        reg = <0x58>;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+
+        rtc {
+          compatible = "dlg,da9063-rtc";
+        };
+
+        watchdog {
+          compatible = "dlg,da9063-watchdog";
+        };
+
+        onkey {
+          compatible = "dlg,da9063-onkey";
+          dlg,disable-key-power;
+        };
+
+        regulators {
+          bcore1 {
+            regulator-name = "BCORE1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1570000>;
+            regulator-min-microamp = <500000>;
+            regulator-max-microamp = <2000000>;
+            regulator-boot-on;
+          };
+          ldo11 {
+            regulator-name = "LDO_11";
+            regulator-min-microvolt = <900000>;
+            regulator-max-microvolt = <3600000>;
+            regulator-boot-on;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
new file mode 100644
index 000000000000..08af356f5d27
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENE KB3930 Embedded Controller bindings
+
+description: |
+  This binding describes the ENE KB3930 Embedded Controller attached to an
+  I2C bus.
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - dell,wyse-ariel-ec  # Dell Wyse Ariel board (3020)
+      - const: ene,kb3930
+  reg:
+    maxItems: 1
+
+  off-gpios:
+    description: GPIO used with the shutdown protocol on Ariel
+    maxItems: 2
+
+  system-power-controller: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      embedded-controller@58 {
+        compatible = "dell,wyse-ariel-ec", "ene,kb3930";
+        reg = <0x58>;
+        system-power-controller;
+
+        off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>,
+                    <&gpio 127 GPIO_ACTIVE_HIGH>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/ene-kb930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml
new file mode 100644
index 000000000000..06ed9ec8f4bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ene-kb930.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENE KB930 Embedded Controller bindings
+
+description: |
+  This binding describes the ENE KB930 Embedded Controller attached to an
+  I2C bus.
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - acer,a500-iconia-ec # Acer A500 Iconia tablet device
+      - const: ene,kb930
+  reg:
+    maxItems: 1
+
+  monitored-battery: true
+  power-supplies: true
+  system-power-controller: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    battery: battery-cell {
+      compatible = "simple-battery";
+      charge-full-design-microamp-hours = <3260000>;
+      energy-full-design-microwatt-hours = <24000000>;
+      operating-range-celsius = <0 40>;
+    };
+
+    mains: ac-adapter {
+      compatible = "gpio-charger";
+      charger-type = "mains";
+      gpios = <&gpio 125 0>;
+    };
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      embedded-controller@58 {
+        compatible = "acer,a500-iconia-ec", "ene,kb930";
+        reg = <0x58>;
+
+        system-power-controller;
+
+        monitored-battery = <&battery>;
+        power-supplies = <&mains>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
new file mode 100644
index 000000000000..f09577105b50
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  As a system controller, the Freescale i.MX8qm/qxp Control and Status
+  Registers(CSR) module represents a set of miscellaneous registers of a
+  specific subsystem.  It may provide control and/or status report interfaces
+  to a mix of standalone hardware devices within that subsystem.  One typical
+  use-case is for some other nodes to acquire a reference to the syscon node
+  by phandle, and the other typical use-case is that the operating system
+  should consider all subnodes of the CSR module as separate child devices.
+
+properties:
+  $nodename:
+    pattern: "^syscon@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8qxp-mipi-lvds-csr
+          - fsl,imx8qm-lvds-csr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+patternProperties:
+  "^(ldb|phy|pxl2dpi)$":
+    type: object
+    description: The possible child devices of the CSR module.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-mipi-lvds-csr
+    then:
+      required:
+        - pxl2dpi
+        - ldb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-lvds-csr
+    then:
+      required:
+        - phy
+        - ldb
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    mipi_lvds_0_csr: syscon@56221000 {
+        compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
+        reg = <0x56221000 0x1000>;
+        clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "ipg";
+
+        mipi_lvds_0_pxl2dpi: pxl2dpi {
+            compatible = "fsl,imx8qxp-pxl2dpi";
+            fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
+
+                    mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                    };
+
+                    mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                    };
+                };
+
+                port@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+
+                    mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                    };
+
+                    mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                    };
+                };
+            };
+        };
+
+        mipi_lvds_0_ldb: ldb {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "fsl,imx8qxp-ldb";
+            clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                     <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+            clock-names = "pixel", "bypass";
+            power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+            channel@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+                phys = <&mipi_lvds_0_phy>;
+                phy-names = "lvds_phy";
+
+                port@0 {
+                    reg = <0>;
+
+                    mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                        remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    /* ... */
+                };
+            };
+
+            channel@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+                phys = <&mipi_lvds_0_phy>;
+                phy-names = "lvds_phy";
+
+                port@0 {
+                    reg = <0>;
+
+                    mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                        remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    /* ... */
+                };
+            };
+        };
+    };
+
+    mipi_lvds_0_phy: phy@56228300 {
+        compatible = "fsl,imx8qxp-mipi-dphy";
+        reg = <0x56228300 0x100>;
+        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
+        clock-names = "phy_ref";
+        #phy-cells = <0>;
+        fsl,syscon = <&mipi_lvds_0_csr>;
+        power-domains = <&pd IMX_SC_R_MIPI_0>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
new file mode 100644
index 000000000000..acb9c54942d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -0,0 +1,203 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gateworks System Controller
+
+description: |
+  The Gateworks System Controller (GSC) is a device present across various
+  Gateworks product families that provides a set of system related features
+  such as the following (refer to the board hardware user manuals to see what
+  features are present)
+   - Watchdog Timer
+   - GPIO
+   - Pushbutton controller
+   - Hardware monitor with ADC's for temperature and voltage rails and
+     fan controller
+
+maintainers:
+  - Tim Harvey <tharvey@gateworks.com>
+
+properties:
+  $nodename:
+    pattern: "gsc@[0-9a-f]{1,2}"
+  compatible:
+    const: gw,gsc
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  adc:
+    type: object
+    additionalProperties: false
+    description: Optional hardware monitoring module
+
+    properties:
+      compatible:
+        const: gw,gsc-adc
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^channel@[0-9a-f]+$":
+        type: object
+        additionalProperties: false
+        description: |
+          Properties for a single ADC which can report cooked values
+          (i.e. temperature sensor based on thermister), raw values
+          (i.e. voltage rail with a pre-scaling resistor divider).
+
+        properties:
+          reg:
+            description: Register of the ADC
+            maxItems: 1
+
+          label:
+            description: Name of the ADC input
+
+          gw,mode:
+            description: |
+              conversion mode:
+                0 - temperature, in C*10
+                1 - pre-scaled 24-bit voltage value
+                2 - scaled voltage based on an optional resistor divider
+                    and optional offset
+                3 - pre-scaled 16-bit voltage value
+                4 - fan tach input to report RPM's
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3, 4]
+
+          gw,voltage-divider-ohms:
+            description: Values of resistors for divider on raw ADC input
+            maxItems: 2
+            items:
+              minimum: 1000
+              maximum: 1000000
+
+          gw,voltage-offset-microvolt:
+            description: |
+              A positive voltage offset to apply to a raw ADC
+              (i.e. to compensate for a diode drop).
+            minimum: 0
+            maximum: 1000000
+
+        required:
+          - gw,mode
+          - reg
+          - label
+
+    required:
+      - compatible
+      - "#address-cells"
+      - "#size-cells"
+
+patternProperties:
+  "^fan-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    description: Optional fan controller
+
+    properties:
+      compatible:
+        const: gw,gsc-fan
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The fan controller base address
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - "#address-cells"
+      - "#size-cells"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gsc@20 {
+            compatible = "gw,gsc";
+            reg = <0x20>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            adc {
+                compatible = "gw,gsc-adc";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                channel@0 { /* A0: Board Temperature */
+                    reg = <0x00>;
+                    label = "temp";
+                    gw,mode = <0>;
+                };
+
+                channel@2 { /* A1: Input Voltage (raw ADC) */
+                    reg = <0x02>;
+                    label = "vdd_vin";
+                    gw,mode = <1>;
+                    gw,voltage-divider-ohms = <22100 1000>;
+                    gw,voltage-offset-microvolt = <800000>;
+                };
+
+                channel@b { /* A2: Battery voltage */
+                    reg = <0x0b>;
+                    label = "vdd_bat";
+                    gw,mode = <1>;
+                };
+            };
+
+            fan-controller@2c {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                compatible = "gw,gsc-fan";
+                reg = <0x2c>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
new file mode 100644
index 000000000000..04962bb29576
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -0,0 +1,225 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/google,cros-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS Embedded Controller
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+  - Guenter Roeck <groeck@chromium.org>
+
+description:
+  Google's ChromeOS EC is a microcontroller which talks to the AP and
+  implements various functions such as keyboard and battery charging.
+  The EC can be connected through various interfaces (I2C, SPI, and others)
+  and the compatible string specifies which interface is being used.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          For implementations of the EC is connected through I2C.
+        const: google,cros-ec-i2c
+      - description:
+          For implementations of the EC is connected through SPI.
+        const: google,cros-ec-spi
+      - description:
+          For implementations of the EC is connected through RPMSG.
+        const: google,cros-ec-rpmsg
+
+  controller-data:
+    description:
+      SPI controller data, see bindings/spi/samsung,spi-peripheral-props.yaml
+    type: object
+
+  google,cros-ec-spi-pre-delay:
+    description:
+      This property specifies the delay in usecs between the
+      assertion of the CS and the first clock pulse.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  google,cros-ec-spi-msg-delay:
+    description:
+      This property specifies the delay in usecs between messages.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  google,has-vbc-nvram:
+    description:
+      Some implementations of the EC include a small nvram space used to
+      store verified boot context data. This boolean flag is used to specify
+      whether this nvram is present or not.
+    type: boolean
+
+  mediatek,rpmsg-name:
+    description:
+      Must be defined if the cros-ec is a rpmsg device for a Mediatek
+      ARM Cortex M4 Co-processor. Contains the name of the rpmsg
+      device. Used to match the subnode to the rpmsg device announced by
+      the SCP.
+    $ref: "/schemas/types.yaml#/definitions/string"
+
+  spi-max-frequency:
+    description: Maximum SPI frequency of the device in Hz.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    description: Button can wake-up the system.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  typec:
+    $ref: "/schemas/chrome/google,cros-ec-typec.yaml#"
+
+  ec-pwm:
+    $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+    deprecated: true
+
+  pwm:
+    $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+
+  kbd-led-backlight:
+    $ref: "/schemas/chrome/google,cros-kbd-led-backlight.yaml#"
+
+  keyboard-controller:
+    $ref: "/schemas/input/google,cros-ec-keyb.yaml#"
+
+  proximity:
+    $ref: "/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#"
+
+  codecs:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 2
+
+      '#size-cells':
+        const: 1
+
+    patternProperties:
+      "^ec-codec@[a-f0-9]+$":
+        type: object
+        $ref: "/schemas/sound/google,cros-ec-codec.yaml#"
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+  cbas:
+    type: object
+
+    description:
+      This device is used to signal when a detachable base is attached
+      to a Chrome OS tablet. This device cannot be detected at runtime.
+
+    properties:
+      compatible:
+        const: google,cros-cbas
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+patternProperties:
+  "^i2c-tunnel[0-9]*$":
+    type: object
+    $ref: "/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#"
+
+  "^regulator@[0-9]+$":
+    type: object
+    $ref: "/schemas/regulator/google,cros-ec-regulator.yaml#"
+
+  "^extcon[0-9]*$":
+    type: object
+    $ref: "/schemas/extcon/extcon-usbc-cros-ec.yaml#"
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,cros-ec-i2c
+              - google,cros-ec-rpmsg
+    then:
+      properties:
+        google,cros-ec-spi-pre-delay: false
+        google,cros-ec-spi-msg-delay: false
+        spi-max-frequency: false
+    else:
+      $ref: /schemas/spi/spi-peripheral-props.yaml
+
+additionalProperties: false
+
+examples:
+  # Example for I2C
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@1e {
+            compatible = "google,cros-ec-i2c";
+            reg = <0x1e>;
+            interrupts = <6 0>;
+            interrupt-parent = <&gpio0>;
+        };
+    };
+
+  # Example for SPI
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0x0>;
+            google,cros-ec-spi-msg-delay = <30>;
+            google,cros-ec-spi-pre-delay = <10>;
+            interrupts = <99 0>;
+            interrupt-parent = <&gpio7>;
+            spi-max-frequency = <5000000>;
+
+            proximity {
+                compatible = "google,cros-ec-mkbp-proximity";
+            };
+
+            cbas {
+                compatible = "google,cros-cbas";
+            };
+        };
+    };
+
+  # Example for RPMSG
+  - |
+    scp0 {
+        cros-ec {
+            compatible = "google,cros-ec-rpmsg";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
new file mode 100644
index 000000000000..22edcb4b212f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon 6421v600 SPMI PMIC
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+  HiSilicon 6421v600 should be connected inside a MIPI System Power Management
+  (SPMI) bus. It provides interrupts and power supply.
+
+  The GPIO and interrupt settings are represented as part of the top-level PMIC
+  node.
+
+  The SPMI controller part is provided by
+  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]"
+
+  compatible:
+    const: hisilicon,hi6421v600-spmi
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^ldo[0-9]+$':
+        type: object
+
+        $ref: "/schemas/regulator/regulator.yaml#"
+
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+
+    pmic: pmic@0 {
+      compatible = "hisilicon,hi6421v600-spmi";
+      reg = <0 0>;
+
+      #interrupt-cells = <2>;
+      interrupt-controller;
+      interrupt-parent = <&gpio28>;
+      interrupts = <0 0>;
+
+      regulators {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ldo3: ldo3 {
+          regulator-name = "ldo3";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <2000000>;
+          regulator-boot-on;
+        };
+
+        ldo4: ldo4 {
+          regulator-name = "ldo4";
+          regulator-min-microvolt = <1725000>;
+          regulator-max-microvolt = <1900000>;
+          regulator-boot-on;
+        };
+
+        ldo9: ldo9 {
+          regulator-name = "ldo9";
+          regulator-min-microvolt = <1750000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-boot-on;
+        };
+
+        ldo15: ldo15 {
+          regulator-name = "ldo15";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-always-on;
+        };
+
+        ldo16: ldo16 {
+          regulator-name = "ldo16";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-boot-on;
+        };
+
+        ldo17: ldo17 {
+          regulator-name = "ldo17";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+        };
+
+        ldo33: ldo33 {
+          regulator-name = "ldo33";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-boot-on;
+        };
+
+        ldo34: ldo34 {
+          regulator-name = "ldo34";
+          regulator-min-microvolt = <2600000>;
+          regulator-max-microvolt = <3300000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
new file mode 100644
index 000000000000..044cd7542c2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/iqs62x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A/621/622/624/625 Multi-Function Sensors
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
+  integrate multiple sensing technologies in a single package.
+
+  Link to datasheets: https://www.azoteq.com/
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs620a
+      - azoteq,iqs621
+      - azoteq,iqs622
+      - azoteq,iqs624
+      - azoteq,iqs625
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Specifies the name of the calibration and configuration file selected by
+      the driver. If this property is omitted, the name is chosen based on the
+      device name with ".bin" as the extension (e.g. iqs620a.bin for IQS620A).
+
+  keys:
+    $ref: ../input/iqs62x-keys.yaml
+
+  pwm:
+    $ref: ../pwm/iqs620a-pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    /*
+     * Dual capacitive buttons with proximity-activated function, unipolar lid
+     * switch and panel-mounted LED.
+     */
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs620a@44 {
+                    compatible = "azoteq,iqs620a";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    keys {
+                            compatible = "azoteq,iqs620a-keys";
+
+                            linux,keycodes = <KEY_SELECT>,
+                                             <KEY_MENU>,
+                                             <KEY_OK>,
+                                             <KEY_MENU>;
+
+                            hall-switch-south {
+                                    linux,code = <SW_LID>;
+                                    azoteq,use-prox;
+                            };
+                    };
+
+                    iqs620a_pwm: pwm {
+                            compatible = "azoteq,iqs620a-pwm";
+                            #pwm-cells = <2>;
+                    };
+            };
+    };
+
+    pwmleds {
+            compatible = "pwm-leds";
+
+            led-1 {
+                    pwms = <&iqs620a_pwm 0 1000000>;
+                    max-brightness = <255>;
+            };
+    };
+
+  - |
+    /* Single inductive button with bipolar dock/tablet-mode switch. */
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs620a@44 {
+                    compatible = "azoteq,iqs620a";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    firmware-name = "iqs620a_coil.bin";
+
+                    keys {
+                            compatible = "azoteq,iqs620a-keys";
+
+                            linux,keycodes = <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <KEY_MUTE>;
+
+                            hall-switch-north {
+                                    linux,code = <SW_DOCK>;
+                            };
+
+                            hall-switch-south {
+                                    linux,code = <SW_TABLET_MODE>;
+                            };
+                    };
+            };
+    };
+
+  - |
+    /* Dual capacitive buttons with volume knob. */
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs624@44 {
+                    compatible = "azoteq,iqs624";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    keys {
+                            compatible = "azoteq,iqs624-keys";
+
+                            linux,keycodes = <BTN_0>,
+                                             <0>,
+                                             <BTN_1>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <KEY_VOLUMEUP>,
+                                             <KEY_VOLUMEDOWN>;
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
new file mode 100644
index 000000000000..084960fd5a1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/khadas,mcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Khadas on-board Microcontroller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  Khadas embeds a microcontroller on their VIM and Edge boards adding some
+  system feature as PWM Fan control (for VIM2 rev14 or VIM3), User memory
+  storage, IR/Key resume control, system power LED control and more.
+
+properties:
+  compatible:
+    enum:
+      - khadas,mcu # MCU revision is discoverable
+
+  "#cooling-cells": # Only needed for boards having FAN control feature
+    const: 2
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      khadas_mcu: system-controller@18 {
+        compatible = "khadas,mcu";
+        reg = <0x18>;
+        #cooling-cells = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
new file mode 100644
index 000000000000..eb3b43547cb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kontron's sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  The board management controller may contain different IP blocks like
+  watchdog, fan monitoring, PWM controller, interrupt controller and a
+  GPIO controller.
+
+properties:
+  compatible:
+    const: kontron,sl28cpld
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+patternProperties:
+  "^gpio(@[0-9a-f]+)?$":
+    $ref: ../gpio/kontron,sl28cpld-gpio.yaml
+
+  "^hwmon(@[0-9a-f]+)?$":
+    $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
+
+  "^interrupt-controller(@[0-9a-f]+)?$":
+    $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
+
+  "^pwm(@[0-9a-f]+)?$":
+    $ref: ../pwm/kontron,sl28cpld-pwm.yaml
+
+  "^watchdog(@[0-9a-f]+)?$":
+    $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sl28cpld@4a {
+            compatible = "kontron,sl28cpld";
+            reg = <0x4a>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            watchdog@4 {
+                compatible = "kontron,sl28cpld-wdt";
+                reg = <0x4>;
+                kontron,assert-wdt-timeout-pin;
+            };
+
+            hwmon@b {
+                compatible = "kontron,sl28cpld-fan";
+                reg = <0xb>;
+            };
+
+            pwm@c {
+                compatible = "kontron,sl28cpld-pwm";
+                reg = <0xc>;
+                #pwm-cells = <2>;
+            };
+
+            pwm@e {
+                compatible = "kontron,sl28cpld-pwm";
+                reg = <0xe>;
+                #pwm-cells = <2>;
+            };
+
+            gpio@10 {
+                compatible = "kontron,sl28cpld-gpio";
+                reg = <0x10>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-line-names = "a", "b", "c";
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+
+            gpio@15 {
+                compatible = "kontron,sl28cpld-gpio";
+                reg = <0x15>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+
+            gpio@1a {
+                compatible = "kontron,sl28cpld-gpo";
+                reg = <0x1a>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@1b {
+                compatible = "kontron,sl28cpld-gpi";
+                reg = <0x1b>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            interrupt-controller@1c {
+                compatible = "kontron,sl28cpld-intc";
+                reg = <0x1c>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/lp87565.txt b/Documentation/devicetree/bindings/mfd/lp87565.txt
deleted file mode 100644
index 41671e0dc26b..000000000000
--- a/Documentation/devicetree/bindings/mfd/lp87565.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-TI LP87565 PMIC MFD driver
-
-Required properties:
-  - compatible:	"ti,lp87565", "ti,lp87565-q1"
-  - reg:		I2C slave address.
-  - gpio-controller:	Marks the device node as a GPIO Controller.
-  - #gpio-cells:	Should be two.  The first cell is the pin number and
-			the second cell is used to specify flags.
-			See ../gpio/gpio.txt for more information.
-  - xxx-in-supply:	Phandle to parent supply node of each regulator
-			populated under regulators node. xxx should match
-			the supply_name populated in driver.
-Example:
-
-lp87565_pmic: pmic@60 {
-	compatible = "ti,lp87565-q1";
-	reg = <0x60>;
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	buck10-in-supply = <&vsys_3v3>;
-	buck23-in-supply = <&vsys_3v3>;
-
-	regulators: regulators {
-		buck10_reg: buck10 {
-			/* VDD_MPU */
-			regulator-name = "buck10";
-			regulator-min-microvolt = <850000>;
-			regulator-max-microvolt = <1250000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		buck23_reg: buck23 {
-			/* VDD_GPU */
-			regulator-name = "buck23";
-			regulator-min-microvolt = <850000>;
-			regulator-max-microvolt = <1250000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
-
-TI LP87561 PMIC:
-
-This is a single output 4-phase regulator configuration
-
-Required properties:
-  - compatible:	"ti,lp87561-q1"
-  - reg:		I2C slave address.
-  - gpio-controller:	Marks the device node as a GPIO Controller.
-  - #gpio-cells:	Should be two.  The first cell is the pin number and
-			the second cell is used to specify flags.
-			See ../gpio/gpio.txt for more information.
-  - xxx-in-supply:	Phandle to parent supply node of each regulator
-			populated under regulators node. xxx should match
-			the supply_name populated in driver.
-Example:
-
-lp87561_pmic: pmic@62 {
-	compatible = "ti,lp87561-q1";
-	reg = <0x62>;
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	buck3210-in-supply = <&vsys_3v3>;
-
-	regulators: regulators {
-		buck3210_reg: buck3210 {
-			/* VDD_CORE */
-			regulator-name = "buck3210";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/madera.txt b/Documentation/devicetree/bindings/mfd/madera.txt
deleted file mode 100644
index 47e2b8bc6051..000000000000
--- a/Documentation/devicetree/bindings/mfd/madera.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-Cirrus Logic Madera class audio codecs Multi-Functional Device
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-See also the child driver bindings in:
-bindings/pinctrl/cirrus,madera-pinctrl.txt
-bindings/regulator/arizona-regulator.txt
-bindings/sound/madera.txt
-
-Required properties:
-
-  - compatible : One of the following chip-specific strings:
-        "cirrus,cs47l15"
-        "cirrus,cs47l35"
-        "cirrus,cs47l85"
-        "cirrus,cs47l90"
-        "cirrus,cs47l91"
-        "cirrus,cs42l92"
-        "cirrus,cs47l92"
-        "cirrus,cs47l93"
-        "cirrus,wm1840"
-
-  - reg : I2C slave address when connected using I2C, chip select number when
-    using SPI.
-
-  - DCVDD-supply : Power supply for the device as defined in
-    bindings/regulator/regulator.txt
-    Mandatory on CS47L15, CS47L35, CS47L90, CS47L91, CS42L92, CS47L92, CS47L93
-    Optional on CS47L85, WM1840
-
-  - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply :
-    Power supplies for the device
-
-  - DBVDD3-supply, DBVDD4-supply : Power supplies for the device
-    (CS47L85, CS47L90, CS47L91, WM1840)
-
-  - SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device
-    (CS47L85, WM1840)
-
-  - SPKVDD-supply : Power supply for the device
-    (CS47L15, CS47L35)
-
-  - interrupt-controller : Indicates that this device is an interrupt controller
-
-  - #interrupt-cells: the number of cells to describe an IRQ, must be 2.
-    The first cell is the IRQ number.
-    The second cell is the flags, encoded as the trigger masks from
-    bindings/interrupt-controller/interrupts.txt
-
-  - gpio-controller : Indicates this device is a GPIO controller.
-
-  - #gpio-cells : Must be 2. The first cell is the pin number. The second cell
-    is reserved for future use and must be zero
-
-  - interrupt-parent : The parent interrupt controller.
-
-  - interrupts : The interrupt line the /IRQ signal for the device is
-    connected to.
-
-Optional properties:
-
-  - MICVDD-supply : Power supply, only need to be specified if
-    powered externally
-
-  - reset-gpios : One entry specifying the GPIO controlling /RESET.
-    As defined in bindings/gpio.txt.
-    Although optional, it is strongly recommended to use a hardware reset
-
-  - clocks: Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3
-  - clock-names: May contain up to three strings:
-      "mclk1" for the clock supplied on MCLK1, recommended to be a high
-      quality audio reference clock
-      "mclk2" for the clock supplied on MCLK2, required to be an always on
-      32k clock
-      "mclk3" for the clock supplied on MCLK3
-
-  - MICBIASx : Initial data for the MICBIAS regulators, as covered in
-    Documentation/devicetree/bindings/regulator/regulator.txt.
-    One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...)
-    (all codecs)
-
-    One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...)
-    (all except CS47L85, WM1840)
-
-    The following following additional property is supported for the generator
-    nodes:
-      - cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling
-        capacitors attached.
-
-Optional child nodes:
-    micvdd : Node containing initialization data for the micvdd regulator
-    See bindings/regulator/arizona-regulator.txt
-
-    ldo1 : Node containing initialization data for the LDO1 regulator
-    See bindings/regulator/arizona-regulator.txt
-    (cs47l85, wm1840)
-
-Example:
-
-cs47l85@0 {
-	compatible = "cirrus,cs47l85";
-	reg = <0>;
-
-	reset-gpios = <&gpio 0>;
-
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	interrupts = <&host_irq1>;
-	interrupt-parent = <&gic>;
-
-	gpio-controller;
-	#gpio-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt
deleted file mode 100644
index 92070b346756..000000000000
--- a/Documentation/devicetree/bindings/mfd/max14577.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Maxim MAX14577/77836 Multi-Function Device
-
-MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
-Battery Charger and SFOUT LDO output for powering USB devices. It is
-interfaced to host controller using I2C.
-
-MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
-For the description of Fuel Gauge low SOC alert interrupt see:
-../power/supply/max17040_battery.txt
-
-
-Required properties:
-- compatible : Must be "maxim,max14577" or "maxim,max77836".
-- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
-- interrupts : IRQ line for the chip.
-
-
-Required nodes:
- - charger :
-	Node for configuring the charger driver.
-	Required properties:
-		- compatible : "maxim,max14577-charger"
-			or "maxim,max77836-charger"
-		- maxim,fast-charge-uamp : Current in uA for Fast Charge;
-			Valid values:
-			- for max14577: 90000 - 950000;
-			- for max77836: 45000 - 475000;
-		- maxim,eoc-uamp : Current in uA for End-Of-Charge mode;
-			Valid values:
-			- for max14577: 50000 - 200000;
-			- for max77836: 5000 - 100000;
-		- maxim,ovp-uvolt : OverVoltage Protection Threshold in uV;
-			In an overvoltage condition, INT asserts and charging
-			stops. Valid values:
-			- 6000000, 6500000, 7000000, 7500000;
-		- maxim,constant-uvolt : Battery Constant Voltage in uV;
-			Valid values:
-			- 4000000 - 4280000 (step by 20000);
-			- 4350000;
-
-
-Optional nodes:
-- max14577-muic/max77836-muic :
-	Node used only by extcon consumers.
-	Required properties:
-		- compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
-
-- regulators :
-	Required properties:
-		- compatible : "maxim,max14577-regulator"
-			or "maxim,max77836-regulator"
-
-	May contain a sub-node per regulator from the list below. Each
-	sub-node should contain the constraints and initialization information
-	for that regulator. See regulator.txt for a description of standard
-	properties for these sub-nodes.
-
-	List of valid regulator names:
-	- for max14577: CHARGER, SAFEOUT.
-	- for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
-
-	The SAFEOUT is a fixed voltage regulator so there is no need to specify
-	voltages for it.
-
-
-Example:
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-max14577@25 {
-	compatible = "maxim,max14577";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_NONE>;
-
-	muic: max14577-muic {
-		compatible = "maxim,max14577-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max14577-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max14577-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <450000>;
-		maxim,eoc-uamp = <50000>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
-
-
-max77836@25 {
-	compatible = "maxim,max77836";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_NONE>;
-
-	muic: max77836-muic {
-		compatible = "maxim,max77836-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max77836-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-		LDO1 {
-			regulator-name = "LDO1";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-		LDO2 {
-			regulator-name = "LDO2";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3950000>;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max77836-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <225000>;
-		maxim,eoc-uamp = <7500>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
index 480385789394..b0a0f0d3d9d4 100644
--- a/Documentation/devicetree/bindings/mfd/max77650.yaml
+++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
@@ -73,6 +73,8 @@ required:
   - gpio-controller
   - "#gpio-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
deleted file mode 100644
index 42968b7144e0..000000000000
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Maxim MAX77686 multi-function device
-
-MAX77686 is a Multifunction device with PMIC, RTC and Charger on chip. It is
-interfaced to host controller using i2c interface. PMIC and Charger submodules
-are addressed using same i2c slave address whereas RTC submodule uses
-different i2c slave address,presently for which we are statically creating i2c
-client while probing.This document describes the binding for mfd device and
-PMIC submodule.
-
-Bindings for the built-in 32k clock generator block and
-regulators are defined in ../clk/maxim,max77686.txt and
-../regulator/max77686.txt respectively.
-
-Required properties:
-- compatible : Must be "maxim,max77686";
-- reg : Specifies the i2c slave address of PMIC block.
-- interrupts : This i2c device has an IRQ line connected to the main SoC.
-
-Example:
-
-	max77686: pmic@9 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&wakeup_eint>;
-		interrupts = <26 0>;
-		reg = <0x09>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt
deleted file mode 100644
index 0ced96e16c16..000000000000
--- a/Documentation/devicetree/bindings/mfd/max77693.txt
+++ /dev/null
@@ -1,194 +0,0 @@
-Maxim MAX77693 multi-function device
-
-MAX77693 is a Multifunction device with the following submodules:
-- PMIC,
-- CHARGER,
-- LED,
-- MUIC,
-- HAPTIC
-
-It is interfaced to host controller using i2c.
-This document describes the bindings for the mfd device.
-
-Required properties:
-- compatible : Must be "maxim,max77693".
-- reg : Specifies the i2c slave address of PMIC block.
-- interrupts : This i2c device has an IRQ line connected to the main SoC.
-
-Optional properties:
-- regulators : The regulators of max77693 have to be instantiated under subnode
-  named "regulators" using the following format.
-
-	regulators {
-		regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER
-		standard regulator constraints[*].
-	};
-
-	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide
-  users with tactile feedback. PWM period and duty-cycle are varied in
-  order to provide the appropriate level of feedback.
-
- Required properties:
-	- compatible : Must be "maxim,max77693-haptic"
-	- haptic-supply : power supply for the haptic motor
-	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
-	- pwms : phandle to the physical PWM(Pulse Width Modulation) device.
-	 PWM properties should be named "pwms". And number of cell is different
-	 for each pwm device.
-	 To get more information, please refer to documentation.
-	[*] refer Documentation/devicetree/bindings/pwm/pwm.txt
-
-- charger : Node configuring the charger driver.
-  If present, required properties:
-  - compatible : Must be "maxim,max77693-charger".
-
-  Optional properties (if not set, defaults will be used):
-  - maxim,constant-microvolt : Battery constant voltage in uV. The charger
-    will operate in fast charge constant current mode till battery voltage
-    reaches this level. Then the charger will switch to fast charge constant
-    voltage mode. Also vsys (system voltage) will be set to this value when
-    DC power is supplied but charger is not enabled.
-    Valid values: 3650000 - 4400000, step by 25000 (rounded down)
-    Default: 4200000
-
-  - maxim,min-system-microvolt : Minimal system voltage in uV.
-    Valid values: 3000000 - 3700000, step by 100000 (rounded down)
-    Default: 3600000
-
-  - maxim,thermal-regulation-celsius : Temperature in Celsius for entering
-    high temperature charging mode. If die temperature exceeds this value
-    the charging current will be reduced by 105 mA/Celsius.
-    Valid values: 70, 85, 100, 115
-    Default: 100
-
-  - maxim,battery-overcurrent-microamp : Overcurrent protection threshold
-    in uA (current from battery to system).
-    Valid values: 2000000 - 3500000, step by 250000 (rounded down)
-    Default: 3500000
-
-  - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for
-    triggering input voltage regulation loop. If input voltage decreases
-    below this value, the input current will be reduced to reach the
-    threshold voltage.
-    Valid values: 4300000, 4700000, 4800000, 4900000
-    Default: 4300000
-
-- led : the LED submodule device node
-
-There are two LED outputs available - FLED1 and FLED2. Each of them can
-control a separate LED or they can be connected together to double
-the maximum current for a single connected LED. One LED is represented
-by one child node.
-
-Required properties:
-- compatible : Must be "maxim,max77693-led".
-
-Optional properties:
-- maxim,boost-mode :
-	In boost mode the device can produce up to 1.2A of total current
-	on both outputs. The maximum current on each output is reduced
-	to 625mA then. If not enabled explicitly, boost setting defaults to
-	LEDS_BOOST_FIXED in case both current sources are used.
-	Possible values:
-		LEDS_BOOST_OFF (0) - no boost,
-		LEDS_BOOST_ADAPTIVE (1) - adaptive mode,
-		LEDS_BOOST_FIXED (2) - fixed mode.
-- maxim,boost-mvout : Output voltage of the boost module in millivolts.
-	Valid values: 3300 - 5500, step by 25 (rounded down)
-	Default: 3300
-- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired
-	if chip estimates that system voltage could drop below this level due
-	to flash power consumption.
-	Valid values: 2400 - 3400, step by 33 (rounded down)
-	Default: 2400
-
-Required properties for the LED child node:
-- led-sources : see Documentation/devicetree/bindings/leds/common.txt;
-		device current output identifiers: 0 - FLED1, 1 - FLED2
-- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-	Valid values for a LED connected to one FLED output:
-		15625 - 250000, step by 15625 (rounded down)
-	Valid values for a LED connected to both FLED outputs:
-		15625 - 500000, step by 15625 (rounded down)
-- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-	Valid values for a single LED connected to one FLED output
-	(boost mode must be turned off):
-		15625 - 1000000, step by 15625 (rounded down)
-	Valid values for a single LED connected to both FLED outputs:
-		15625 - 1250000, step by 15625 (rounded down)
-	Valid values for two LEDs case:
-		15625 - 625000, step by 15625 (rounded down)
-- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
-	Valid values: 62500 - 1000000, step by 62500 (rounded down)
-
-Optional properties for the LED child node:
-- label : see Documentation/devicetree/bindings/leds/common.txt
-
-Optional nodes:
-- max77693-muic :
-	Node used only by extcon consumers.
-	Required properties:
-		- compatible : "maxim,max77693-muic"
-
-Example:
-#include <dt-bindings/leds/common.h>
-
-	max77693@66 {
-		compatible = "maxim,max77693";
-		reg = <0x66>;
-		interrupt-parent = <&gpx1>;
-		interrupts = <5 2>;
-
-		regulators {
-			esafeout@1 {
-				regulator-compatible = "ESAFEOUT1";
-				regulator-name = "ESAFEOUT1";
-				regulator-boot-on;
-			};
-			esafeout@2 {
-				regulator-compatible = "ESAFEOUT2";
-				regulator-name = "ESAFEOUT2";
-				};
-			charger@0 {
-				regulator-compatible = "CHARGER";
-				regulator-name = "CHARGER";
-				regulator-min-microamp = <60000>;
-				regulator-max-microamp = <2580000>;
-					regulator-boot-on;
-			};
-		};
-
-		haptic {
-			compatible = "maxim,max77693-haptic";
-			haptic-supply = <&haptic_supply>;
-			pwms = <&pwm 0 40000 0>;
-			pwm-names = "haptic";
-		};
-
-		charger {
-			compatible = "maxim,max77693-charger";
-
-			maxim,constant-microvolt = <4200000>;
-			maxim,min-system-microvolt = <3600000>;
-			maxim,thermal-regulation-celsius = <75>;
-			maxim,battery-overcurrent-microamp = <3000000>;
-			maxim,charge-input-threshold-microvolt = <4300000>;
-		};
-
-		led {
-			compatible = "maxim,max77693-led";
-			maxim,boost-mode = <LEDS_BOOST_FIXED>;
-			maxim,boost-mvout = <5000>;
-			maxim,mvsys-min = <2400>;
-
-			camera_flash: flash-led {
-				label = "max77693-flash";
-				led-sources = <0>, <1>;
-				led-max-microamp = <500000>;
-				flash-max-microamp = <1250000>;
-				flash-max-timeout-us = <1000000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt
deleted file mode 100644
index 09decac20d91..000000000000
--- a/Documentation/devicetree/bindings/mfd/max77802.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Maxim MAX77802 multi-function device
-
-The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high
-efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power
-up application processors and peripherals, a 2-channel 32kHz clock outputs,
-a Real-Time-Clock (RTC) and a I2C interface to program the individual
-regulators, clocks outputs and the RTC.
-
-Bindings for the built-in 32k clock generator block and
-regulators are defined in ../clk/maxim,max77802.txt and
-../regulator/max77802.txt respectively.
-
-Required properties:
-- compatible		: Must be "maxim,max77802"
-- reg			: Specifies the I2C slave address of PMIC block.
-- interrupts		: I2C device IRQ line connected to the main SoC.
-
-Example:
-
-	max77802: pmic@9 {
-		compatible = "maxim,max77802";
-		interrupt-parent = <&intc>;
-		interrupts = <26 IRQ_TYPE_NONE>;
-		reg = <0x09>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt
index 5f2f07c09c90..4ed52184d081 100644
--- a/Documentation/devicetree/bindings/mfd/max8998.txt
+++ b/Documentation/devicetree/bindings/mfd/max8998.txt
@@ -73,6 +73,8 @@ number as described in MAX8998 datasheet.
 	- ESAFEOUT1: (ldo19)
 	- ESAFEOUT2: (ld020)
 
+	- CHARGER: main battery charger current control
+
 Standard regulator bindings are used inside regulator subnodes. Check
   Documentation/devicetree/bindings/regulator/regulator.txt
 for more details.
@@ -113,5 +115,11 @@ Example:
 				regulator-always-on;
 				regulator-boot-on;
 			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <90000>;
+				regulator-max-microamp = <800000>;
+			};
 		};
 	};
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
new file mode 100644
index 000000000000..995e96ee7445
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX14577 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout regulators, charger and MicroUSB management IC.
+
+  The Maxim MAX77836 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout and LDO regulators, charger, fuel-gauge and MicroUSB
+  management IC.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577
+      - maxim,max77836
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  charger:
+    $ref: /schemas/power/supply/maxim,max14577.yaml
+
+  extcon:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        enum:
+          - maxim,max14577-muic
+          - maxim,max77836-muic
+
+    required:
+      - compatible
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max14577.yaml
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - charger
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577
+    then:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max14577-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max14577-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max14577-regulator
+    else:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max77836-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max77836-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max77836-regulator
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max14577";
+            reg = <0x25>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+            extcon {
+                compatible = "maxim,max14577-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max14577-regulator";
+
+                SAFEOUT {
+                    regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <90000>;
+                    regulator-max-microamp = <950000>;
+                    regulator-boot-on;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max14577-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <450000>;
+                maxim,eoc-uamp = <50000>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max77836";
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_NONE>;
+            reg = <0x25>;
+            wakeup-source;
+
+            extcon {
+                compatible = "maxim,max77836-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max77836-regulator";
+
+                SAFEOUT {
+                    regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <45000>;
+                    regulator-max-microamp = <475000>;
+                    regulator-boot-on;
+                };
+
+                LDO1 {
+                    regulator-name = "MOT_2.7V";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <2700000>;
+                };
+
+                LDO2 {
+                    regulator-name = "UNUSED_LDO2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3950000>;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max77836-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <225000>;
+                maxim,eoc-uamp = <7500>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml
new file mode 100644
index 000000000000..d027aabe453b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77686 Power Management IC
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77686 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77686 is a Power Management IC which includes voltage and
+  current regulators, RTC and clock outputs.
+
+  The MAX77686 provides three 32.768khz clock outputs that can be controlled
+  (gated/ungated) over I2C.  The clock IDs are defined as preprocessor macros
+  in dt-bindings/clock/maxim,max77686.h.
+
+properties:
+  compatible:
+    const: maxim,max77686
+
+  '#clock-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  voltage-regulators:
+    $ref: ../regulator/maxim,max77686.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        max77686: pmic@9 {
+            compatible = "maxim,max77686";
+            reg = <0x09>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-0 = <&max77686_irq>;
+            pinctrl-names = "default";
+            wakeup-source;
+            #clock-cells = <1>;
+
+            voltage-regulators {
+                LDO1 {
+                    regulator-name = "VALIVE_1.0V_AP";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                };
+
+                LDO2 {
+                    regulator-name = "VM1M2_1.2V_AP";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                    regulator-always-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                LDO22 {
+                    regulator-name = "VMEM_VDD_2.8V";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+                    maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VDD_MIF";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "VDD_ARM";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK9 {
+                    regulator-name = "CAM_ISP_CORE_1.2V";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1200000>;
+                    maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
new file mode 100644
index 000000000000..1b06a77ec798
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX77693 is a MicroUSB and Companion Power Management IC which
+  includes voltage current regulators, charger, LED/flash, haptic motor driver
+  and MicroUSB management IC.
+
+properties:
+  compatible:
+    const: maxim,max77693
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  charger:
+    $ref: /schemas/power/supply/maxim,max77693.yaml
+
+  led:
+    $ref: /schemas/leds/maxim,max77693.yaml
+
+  max77693-muic:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: maxim,max77693-muic
+
+    required:
+      - compatible
+
+  motor-driver:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: maxim,max77693-haptic
+
+      haptic-supply:
+        description: Power supply to the haptic motor
+
+      pwms:
+        maxItems: 1
+
+    required:
+      - compatible
+      - haptic-supply
+      - pwms
+
+  regulators:
+    $ref: ../regulator/maxim,max77693.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max77693";
+            reg = <0x66>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                ESAFEOUT1 {
+                    regulator-name = "ESAFEOUT1";
+                };
+
+                ESAFEOUT2 {
+                    regulator-name = "ESAFEOUT2";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <60000>;
+                    regulator-max-microamp = <2580000>;
+                };
+            };
+
+            motor-driver {
+                compatible = "maxim,max77693-haptic";
+                haptic-supply = <&ldo26_reg>;
+                pwms = <&pwm 0 38022 0>;
+            };
+
+            charger {
+                compatible = "maxim,max77693-charger";
+
+                maxim,constant-microvolt = <4350000>;
+                maxim,min-system-microvolt = <3600000>;
+                maxim,thermal-regulation-celsius = <100>;
+                maxim,battery-overcurrent-microamp = <3500000>;
+                maxim,charge-input-threshold-microvolt = <4300000>;
+            };
+
+            led {
+                compatible = "maxim,max77693-led";
+                maxim,boost-mode = <LEDS_BOOST_FIXED>;
+                maxim,boost-mvout = <5000>;
+                maxim,mvsys-min = <2400>;
+
+                flash-led {
+                    label = "max77693-flash";
+                    function = LED_FUNCTION_FLASH;
+                    color = <LED_COLOR_ID_WHITE>;
+                    led-sources = <0>, <1>;
+                    led-max-microamp = <500000>;
+                    flash-max-microamp = <1250000>;
+                    flash-max-timeout-us = <1000000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
new file mode 100644
index 000000000000..edac14af101e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated.
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+description: |
+  MAX77714 is a Power Management IC with 4 buck regulators, 9
+  low-dropout regulators, 8 GPIOs, RTC and watchdog.
+
+properties:
+  compatible:
+    const: maxim,max77714
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger type.
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^(buck[0-3]|ldo[0-8])$':
+        type: object
+        unevaluatedProperties: false
+        $ref: /schemas/regulator/regulator.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@1c {
+            compatible = "maxim,max77714";
+            reg = <0x1c>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
new file mode 100644
index 000000000000..ad2013900b03
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77802 Power Management IC
+
+maintainers:
+  - Javier Martinez Canillas <javier@dowhile0.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77802 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77802 is a Power Management IC which includes voltage and
+  current regulators (10 high efficiency Buck regulators and 32 Low-DropOut
+  (LDO)), RTC and clock outputs.
+
+  The MAX77802 provides two 32.768khz clock outputs that can be controlled
+  (gated/ungated) over I2C.  The clock IDs are defined as preprocessor macros
+  in dt-bindings/clock/maxim,max77802.h.
+
+properties:
+  compatible:
+    const: maxim,max77802
+
+  '#clock-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max77802.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  inb1-supply:
+    description: Power supply for buck1
+  inb2-supply:
+    description: Power supply for buck2
+  inb3-supply:
+    description: Power supply for buck3
+  inb4-supply:
+    description: Power supply for buck4
+  inb5-supply:
+    description: Power supply for buck5
+  inb6-supply:
+    description: Power supply for buck6
+  inb7-supply:
+    description: Power supply for buck7
+  inb8-supply:
+    description: Power supply for buck8
+  inb9-supply:
+    description: Power supply for buck9
+  inb10-supply:
+    description: Power supply for buck10
+
+  inl1-supply:
+    description: Power supply for LDO8, LDO15
+  inl2-supply:
+    description: Power supply for LDO17, LDO27, LDO30, LDO35
+  inl3-supply:
+    description: Power supply for LDO3, LDO5, LDO7, LDO7
+  inl4-supply:
+    description: Power supply for LDO10, LDO11, LDO13, LDO14
+  inl5-supply:
+    description: Power supply for LDO9, LDO19
+  inl6-supply:
+    description: Power supply for LDO4, LDO21, LDO24, LDO33
+  inl7-supply:
+    description: Power supply for LDO18, LDO20, LDO28, LDO29
+  inl9-supply:
+    description: Power supply for LDO12, LDO23, LDO25, LDO26, LDO32, LDO34
+  inl10-supply:
+    description: Power supply for LDO1, LDO2
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/maxim,max77802.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@9 {
+            compatible = "maxim,max77802";
+            interrupt-parent = <&gpx3>;
+            interrupts = <1 IRQ_TYPE_NONE>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
+                        <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+            wakeup-source;
+            reg = <0x9>;
+            #clock-cells = <1>;
+
+            inb1-supply = <&tps65090_dcdc2>;
+            inb2-supply = <&tps65090_dcdc1>;
+            inb3-supply = <&tps65090_dcdc2>;
+            inb4-supply = <&tps65090_dcdc2>;
+            inb5-supply = <&tps65090_dcdc1>;
+            inb6-supply = <&tps65090_dcdc2>;
+            inb7-supply = <&tps65090_dcdc1>;
+            inb8-supply = <&tps65090_dcdc1>;
+            inb9-supply = <&tps65090_dcdc1>;
+            inb10-supply = <&tps65090_dcdc1>;
+
+            inl1-supply = <&buck5_reg>;
+            inl2-supply = <&buck7_reg>;
+            inl3-supply = <&buck9_reg>;
+            inl4-supply = <&buck9_reg>;
+            inl5-supply = <&buck9_reg>;
+            inl6-supply = <&tps65090_dcdc2>;
+            inl7-supply = <&buck9_reg>;
+            inl9-supply = <&tps65090_dcdc2>;
+            inl10-supply = <&buck7_reg>;
+
+            regulators {
+                BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-ramp-delay = <12500>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-ramp-delay = <12500>;
+                    regulator-coupled-with = <&buck3_reg>;
+                    regulator-coupled-max-spread = <300000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK10 {
+                    regulator-name = "vdd_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                LDO1 {
+                    regulator-name = "vdd_1v0";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                    regulator-initial-mode = <MAX77802_OPMODE_NORMAL>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-mode = <MAX77802_OPMODE_LP>;
+                    };
+                };
+
+                // ...
+
+                LDO35 {
+                    regulator-name = "ldo_35";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
new file mode 100644
index 000000000000..2e2a2a86b57d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77843 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX77843 is a MicroUSB and Companion Power Management IC which
+  includes voltage current regulators, charger, fuel-gauge, haptic motor driver
+  and MicroUSB management IC.
+
+properties:
+  compatible:
+    const: maxim,max77843
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  extcon:
+    $ref: /schemas/extcon/maxim,max77843.yaml
+
+  motor-driver:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        const: maxim,max77843-haptic
+
+      haptic-supply:
+        description: Power supply to the haptic motor
+
+      pwms:
+        maxItems: 1
+
+    required:
+      - compatible
+      - haptic-supply
+      - pwms
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max77843.yaml
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max77843";
+            interrupt-parent = <&gpa1>;
+            interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+            reg = <0x66>;
+
+            extcon {
+                compatible = "maxim,max77843-muic";
+
+                connector {
+                    compatible = "samsung,usb-connector-11pin",
+                                 "usb-b-connector";
+                    label = "micro-USB";
+                    type = "micro";
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            /*
+                             * TODO: The DTS this is based on does not have
+                             * port@0 which is a required property. The ports
+                             * look incomplete and need fixing.
+                             * Add a disabled port just to satisfy dtschema.
+                             */
+                            reg = <0>;
+                            status = "disabled";
+                        };
+
+                        port@3 {
+                            reg = <3>;
+                            endpoint {
+                                remote-endpoint = <&mhl_to_musb_con>;
+                            };
+                        };
+                    };
+                };
+
+                ports {
+                    port {
+                        endpoint {
+                            remote-endpoint = <&usb_to_muic>;
+                        };
+                    };
+                };
+            };
+
+            regulators {
+                compatible = "maxim,max77843-regulator";
+
+                SAFEOUT1 {
+                    regulator-name = "SAFEOUT1";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <4950000>;
+                };
+
+                SAFEOUT2 {
+                    regulator-name = "SAFEOUT2";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <4950000>;
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <100000>;
+                    regulator-max-microamp = <3150000>;
+                };
+            };
+
+            motor-driver {
+                compatible = "maxim,max77843-haptic";
+                haptic-supply = <&ldo38_reg>;
+                pwms = <&pwm 0 33670 0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
new file mode 100644
index 000000000000..28eee02441ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
@@ -0,0 +1,256 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6360 PMIC from MediaTek Integrated
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  MT6360 is a PMIC device with the following sub modules.
+  It is interfaced to host controller using I2C interface.
+
+  This document describes the binding for PMIC device and its sub module.
+
+properties:
+  compatible:
+    const: mediatek,mt6360
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: IRQB
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+    description:
+      The first cell is the IRQ number.
+
+  regulators:
+    $ref: /schemas/regulator/mt6360-regulator.yaml#
+
+  charger:
+    $ref: /schemas/power/supply/mt6360_charger.yaml#
+
+  tcpc:
+    $ref: /schemas/usb/mediatek,mt6360-tcpc.yaml#
+
+  led-controller:
+    $ref: /schemas/leds/leds-mt6360.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+    #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@34 {
+            compatible = "mediatek,mt6360";
+            reg = <0x34>;
+            wakeup-source;
+            interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "IRQB";
+            interrupt-controller;
+            #interrupt-cells = <1>;
+
+            mt6360_charger: charger {
+                compatible = "mediatek,mt6360-chg";
+                richtek,vinovp-microvolt = <14500000>;
+
+                otg_vbus_regulator: usb-otg-vbus-regulator {
+                    regulator-compatible = "usb-otg-vbus";
+                    regulator-name = "usb-otg-vbus";
+                    regulator-min-microvolt = <4425000>;
+                    regulator-max-microvolt = <5825000>;
+                };
+            };
+
+            led-controller {
+                compatible = "mediatek,mt6360-led";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                multi-led@0 {
+                    reg = <0>;
+                    function = LED_FUNCTION_INDICATOR;
+                    color = <LED_COLOR_ID_RGB>;
+                    led-max-microamp = <24000>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    led@0 {
+                        reg = <0>;
+                        color = <LED_COLOR_ID_RED>;
+                    };
+                    led@1 {
+                        reg = <1>;
+                        color = <LED_COLOR_ID_GREEN>;
+                    };
+                    led@2 {
+                        reg = <2>;
+                        color = <LED_COLOR_ID_BLUE>;
+                    };
+                };
+                led@3 {
+                    reg = <3>;
+                    function = LED_FUNCTION_INDICATOR;
+                    color = <LED_COLOR_ID_WHITE>;
+                    led-max-microamp = <150000>;
+                };
+                led@4 {
+                    reg = <4>;
+                    function = LED_FUNCTION_FLASH;
+                    color = <LED_COLOR_ID_WHITE>;
+                    function-enumerator = <1>;
+                    led-max-microamp = <200000>;
+                    flash-max-microamp = <500000>;
+                    flash-max-timeout-us = <1024000>;
+                };
+                led@5 {
+                    reg = <5>;
+                    function = LED_FUNCTION_FLASH;
+                    color = <LED_COLOR_ID_WHITE>;
+                    function-enumerator = <2>;
+                    led-max-microamp = <200000>;
+                    flash-max-microamp = <500000>;
+                    flash-max-timeout-us = <1024000>;
+                };
+            };
+
+            regulators {
+                compatible = "mediatek,mt6360-regulator";
+                LDO_VIN3-supply = <&BUCK2>;
+                buck1 {
+                    regulator-compatible = "BUCK1";
+                    regulator-name = "mt6360,buck1";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP
+                         MT6360_OPMODE_ULP>;
+                };
+                BUCK2: buck2 {
+                    regulator-compatible = "BUCK2";
+                    regulator-name = "mt6360,buck2";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP
+                         MT6360_OPMODE_ULP>;
+                };
+                ldo6 {
+                    regulator-compatible = "LDO6";
+                    regulator-name = "mt6360,ldo6";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2100000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo7 {
+                    regulator-compatible = "LDO7";
+                    regulator-name = "mt6360,ldo7";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2100000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo1 {
+                    regulator-compatible = "LDO1";
+                    regulator-name = "mt6360,ldo1";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo2 {
+                    regulator-compatible = "LDO2";
+                    regulator-name = "mt6360,ldo2";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo3 {
+                    regulator-compatible = "LDO3";
+                    regulator-name = "mt6360,ldo3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo5 {
+                    regulator-compatible = "LDO5";
+                    regulator-name = "mt6360,ldo5";
+                    regulator-min-microvolt = <2700000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+            };
+
+            tcpc {
+                compatible = "mediatek,mt6360-tcpc";
+                interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+                interrupt-names = "PD_IRQB";
+
+                connector {
+                    compatible = "usb-c-connector";
+                    label = "USB-C";
+                    data-role = "dual";
+                    power-role = "dual";
+                    try-power-role = "sink";
+                    source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+                    sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+                    op-sink-microwatt = <10000000>;
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            reg = <0>;
+                            endpoint {
+                                remote-endpoint = <&usb_hs>;
+                            };
+                        };
+                        port@1 {
+                            reg = <1>;
+                            endpoint {
+                                remote-endpoint = <&usb_ss>;
+                          };
+                        };
+                        port@2 {
+                            reg = <2>;
+                            endpoint {
+                                remote-endpoint = <&dp_aux>;
+                            };
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
new file mode 100644
index 000000000000..5644882db2e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6370.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 SubPMIC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  MT6370 is a highly-integrated smart power management IC, which includes a
+  single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C &
+  Power Delivery (PD) controller, dual flash LED current sources, a RGB LED
+  driver, a backlight WLED driver, a display bias driver and a general LDO for
+  portable devices.
+
+properties:
+  compatible:
+    const: mediatek,mt6370
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  adc:
+    type: object
+    description: |
+      Provides 9 channels for system monitoring, including VBUSDIV5 (lower
+      accuracy, higher measure range), VBUSDIV2 (higher accuracy, lower
+      measure range), VBAT, VSYS, CHG_VDDP, TS_BAT, IBUS, IBAT, and TEMP_JC.
+
+    properties:
+      compatible:
+        const: mediatek,mt6370-adc
+
+      "#io-channel-cells":
+        const: 1
+
+    required:
+      - compatible
+      - "#io-channel-cells"
+
+  backlight:
+    type: object
+    $ref: /schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+
+  charger:
+    type: object
+    $ref: /schemas/power/supply/mediatek,mt6370-charger.yaml#
+
+  tcpc:
+    type: object
+    $ref: /schemas/usb/mediatek,mt6370-tcpc.yaml#
+
+  indicator:
+    type: object
+    $ref: /schemas/leds/mediatek,mt6370-indicator.yaml#
+
+  flashlight:
+    type: object
+    $ref: /schemas/leds/mediatek,mt6370-flashlight.yaml#
+
+  regulators:
+    type: object
+    description: |
+      List all supported regulators, which support the control for DisplayBias
+      voltages and one general purpose LDO which commonly used to drive the
+      vibrator.
+
+    patternProperties:
+      "^(dsvbst|vibldo)$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+      "^(dsvpos|dsvneg)$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          enable-gpios:
+            maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - regulators
+  - adc
+  - backlight
+  - indicator
+  - tcpc
+  - charger
+  - flashlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@34 {
+        compatible = "mediatek,mt6370";
+        reg = <0x34>;
+        wakeup-source;
+        interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        mt6370_adc: adc {
+          compatible = "mediatek,mt6370-adc";
+          #io-channel-cells = <1>;
+        };
+
+        backlight {
+          compatible = "mediatek,mt6370-backlight";
+          mediatek,bled-channel-use = /bits/ 8 <15>;
+        };
+
+        charger {
+          compatible = "mediatek,mt6370-charger";
+          interrupts = <68>, <48>, <6>;
+          interrupt-names = "uvp_d_evt", "attach_i", "mivr";
+          io-channels = <&mt6370_adc MT6370_CHAN_IBUS>;
+
+          mt6370_otg_vbus: usb-otg-vbus-regulator {
+            regulator-name = "mt6370-usb-otg-vbus";
+            regulator-min-microvolt = <4350000>;
+            regulator-max-microvolt = <5800000>;
+            regulator-min-microamp = <500000>;
+            regulator-max-microamp = <3000000>;
+          };
+        };
+
+        indicator {
+          compatible = "mediatek,mt6370-indicator";
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          multi-led@0 {
+            reg = <0>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_RGB>;
+            led-max-microamp = <24000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            led@0 {
+              reg = <0>;
+              color = <LED_COLOR_ID_RED>;
+            };
+            led@1 {
+              reg = <1>;
+              color = <LED_COLOR_ID_GREEN>;
+            };
+            led@2 {
+              reg = <2>;
+              color = <LED_COLOR_ID_BLUE>;
+            };
+          };
+          led@3 {
+            reg = <3>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_WHITE>;
+            led-max-microamp = <6000>;
+          };
+        };
+
+        flashlight {
+          compatible = "mediatek,mt6370-flashlight";
+          #address-cells = <1>;
+          #size-cells = <0>;
+          led@0 {
+            reg = <0>;
+            led-sources = <0>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <1>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1248000>;
+          };
+          led@1 {
+            reg = <1>;
+            led-sources = <1>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <2>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1248000>;
+          };
+        };
+
+        tcpc {
+          compatible = "mediatek,mt6370-tcpc";
+          interrupts-extended = <&gpio26 4 IRQ_TYPE_LEVEL_LOW>;
+
+          connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            vbus-supply = <&mt6370_otg_vbus>;
+            data-role = "dual";
+            power-role = "dual";
+            try-power-role = "sink";
+            source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            op-sink-microwatt = <10000000>;
+
+            ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                reg = <0>;
+                endpoint {
+                  remote-endpoint = <&usb_hs>;
+                };
+              };
+              port@1 {
+                reg = <1>;
+                endpoint {
+                  remote-endpoint = <&usb_ss>;
+                };
+              };
+              port@2 {
+                reg = <2>;
+                endpoint {
+                  remote-endpoint = <&dp_aux>;
+                };
+              };
+            };
+          };
+        };
+
+        regulators {
+          dsvbst {
+            regulator-name = "mt6370-dsv-vbst";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6200000>;
+          };
+          dsvpos {
+            regulator-name = "mt6370-dsv-vpos";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6000000>;
+            regulator-boot-on;
+          };
+          dsvneg {
+            regulator-name = "mt6370-dsv-vneg";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6000000>;
+            regulator-boot-on;
+          };
+          vibldo {
+            regulator-name = "mt6370-vib-ldo";
+            regulator-min-microvolt = <1600000>;
+            regulator-max-microvolt = <4000000>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml
new file mode 100644
index 000000000000..c8c4812fffe2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt8195-scpsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Control Processor System
+
+maintainers:
+  - MandyJH Liu <mandyjh.liu@mediatek.com>
+
+description:
+  MediaTek System Control Processor System (SCPSYS) has several
+  power management tasks. The tasks include MTCMOS power
+  domain control, thermal measurement, DVFS, etc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8167-scpsys
+          - mediatek,mt8173-scpsys
+          - mediatek,mt8183-scpsys
+          - mediatek,mt8186-scpsys
+          - mediatek,mt8192-scpsys
+          - mediatek,mt8195-scpsys
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  power-controller:
+    $ref: /schemas/power/mediatek,power-controller.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    syscon@10006000 {
+      compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd";
+      reg = <0x10006000 0x100>;
+
+      spm: power-controller {
+        compatible = "mediatek,mt8195-power-controller";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #power-domain-cells = <1>;
+
+        /* sample of power domain nodes */
+        power-domain@MT8195_POWER_DOMAIN_PCIE_PHY {
+          reg = <MT8195_POWER_DOMAIN_PCIE_PHY>;
+          #power-domain-cells = <0>;
+        };
+
+        power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY {
+          reg = <MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
+          #power-domain-cells = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
index 5ddcc8f4febc..190230216de8 100644
--- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
+++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
@@ -16,14 +16,14 @@ Optional subnodes:
 The sub-functions of CPCAP get their own node with their own compatible values,
 which are described in the following files:
 
-- ../power/supply/cpcap-battery.txt
-- ../power/supply/cpcap-charger.txt
-- ../regulator/cpcap-regulator.txt
-- ../phy/phy-cpcap-usb.txt
-- ../input/cpcap-pwrbutton.txt
-- ../rtc/cpcap-rtc.txt
-- ../leds/leds-cpcap.txt
-- ../iio/adc/cpcap-adc.txt
+- Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
+- Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
+- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
+- Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
+- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
+- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
+- Documentation/devicetree/bindings/leds/leds-cpcap.txt
+- Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
 
 The only exception is the audio codec. Instead of a compatible value its
 node must be named "audio-codec".
diff --git a/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
new file mode 100644
index 000000000000..5ba849d78d8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mps,mp2629.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MP2629 Battery Charger PMIC from Monolithic Power System.
+
+maintainers:
+  - Saravanan Sekar <sravanhome@gmail.com>
+
+description: |
+  MP2629 is a PMIC providing battery charging and power supply for smartphones,
+  wireless camera and portable devices. Chip is controlled over I2C.
+
+  The battery charge management device handles battery charger controller and
+  ADC IIO device for battery, system voltage
+
+properties:
+  compatible:
+    enum:
+      - mps,mp2629
+      - mps,mp2733
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger type.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@4b {
+            compatible = "mps,mp2629";
+            reg = <0x4b>;
+
+            interrupt-controller;
+            interrupt-parent = <&gpio2>;
+            #interrupt-cells = <2>;
+            interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
new file mode 100644
index 000000000000..8bf45a5673a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mscc,ocelot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ocelot Externally-Controlled Ethernet Switch
+
+maintainers:
+  - Colin Foster <colin.foster@in-advantage.com>
+
+description: |
+  The Ocelot ethernet switch family contains chips that have an internal CPU
+  (VSC7513, VSC7514) and chips that don't (VSC7511, VSC7512). All switches have
+  the option to be controlled externally, which is the purpose of this driver.
+
+  The switch family is a multi-port networking switch that supports many
+  interfaces. Additionally, the device can perform pin control, MDIO buses, and
+  external GPIO expanders.
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc7512
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  spi-max-frequency:
+    maxItems: 1
+
+patternProperties:
+  "^pinctrl@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/mscc,ocelot-pinctrl.yaml
+
+  "^gpio@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/microchip,sparx5-sgpio.yaml
+    properties:
+      compatible:
+        enum:
+          - mscc,ocelot-sgpio
+
+  "^mdio@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/net/mscc,miim.yaml
+    properties:
+      compatible:
+        enum:
+          - mscc,ocelot-miim
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    ocelot_clock: ocelot-clock {
+          compatible = "fixed-clock";
+          #clock-cells = <0>;
+          clock-frequency = <125000000>;
+      };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        soc@0 {
+            compatible = "mscc,vsc7512";
+            spi-max-frequency = <2500000>;
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            mdio@7107009c {
+                compatible = "mscc,ocelot-miim";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x7107009c 0x24>;
+
+                sw_phy0: ethernet-phy@0 {
+                    reg = <0x0>;
+                };
+            };
+
+            mdio@710700c0 {
+                compatible = "mscc,ocelot-miim";
+                pinctrl-names = "default";
+                pinctrl-0 = <&miim1_pins>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x710700c0 0x24>;
+
+                sw_phy4: ethernet-phy@4 {
+                    reg = <0x4>;
+                };
+            };
+
+            gpio: pinctrl@71070034 {
+                compatible = "mscc,ocelot-pinctrl";
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&gpio 0 0 22>;
+                reg = <0x71070034 0x6c>;
+
+                sgpio_pins: sgpio-pins {
+                    pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
+                    function = "sg0";
+                };
+
+                miim1_pins: miim1-pins {
+                    pins = "GPIO_14", "GPIO_15";
+                    function = "miim";
+                };
+            };
+
+            gpio@710700f8 {
+                compatible = "mscc,ocelot-sgpio";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                bus-frequency = <12500000>;
+                clocks = <&ocelot_clock>;
+                microchip,sgpio-port-ranges = <0 15>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&sgpio_pins>;
+                reg = <0x710700f8 0x100>;
+
+                sgpio_in0: gpio@0 {
+                    compatible = "microchip,sparx5-sgpio-bank";
+                    reg = <0>;
+                    gpio-controller;
+                    #gpio-cells = <3>;
+                    ngpios = <64>;
+                };
+
+                sgpio_out1: gpio@1 {
+                    compatible = "microchip,sparx5-sgpio-bank";
+                    reg = <1>;
+                    gpio-controller;
+                    #gpio-cells = <3>;
+                    ngpios = <64>;
+                };
+            };
+        };
+    };
+
+...
+
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index a9b105ac00a8..0088442efca1 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -18,24 +18,33 @@ See the following for pwarp node definitions:
 This document describes the binding for MFD device and its sub module.
 
 Required properties:
-compatible: "mediatek,mt6397" or "mediatek,mt6323"
+compatible:
+	"mediatek,mt6323" for PMIC MT6323
+	"mediatek,mt6331" for PMIC MT6331 and MT6332
+	"mediatek,mt6358" for PMIC MT6358 and MT6366
+	"mediatek,mt6359" for PMIC MT6359
+	"mediatek,mt6397" for PMIC MT6397
 
 Optional subnodes:
 
 - rtc
 	Required properties: Should be one of follows
 		- compatible: "mediatek,mt6323-rtc"
+		- compatible: "mediatek,mt6331-rtc"
+		- compatible: "mediatek,mt6358-rtc"
 		- compatible: "mediatek,mt6397-rtc"
 	For details, see ../rtc/rtc-mt6397.txt
 - regulators
 	Required properties:
-		- compatible: "mediatek,mt6397-regulator"
-	see ../regulator/mt6397-regulator.txt
 		- compatible: "mediatek,mt6323-regulator"
 	see ../regulator/mt6323-regulator.txt
+		- compatible: "mediatek,mt6358-regulator"
+	see ../regulator/mt6358-regulator.txt
+		- compatible: "mediatek,mt6397-regulator"
+	see ../regulator/mt6397-regulator.txt
 - codec
 	Required properties:
-		- compatible: "mediatek,mt6397-codec"
+		- compatible: "mediatek,mt6397-codec" or "mediatek,mt6358-sound"
 - clk
 	Required properties:
 		- compatible: "mediatek,mt6397-clk"
@@ -45,8 +54,10 @@ Optional subnodes:
 	see ../leds/leds-mt6323.txt
 
 - keys
-	Required properties:
-		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
+	Required properties: Should be one of the following
+		- compatible: "mediatek,mt6323-keys"
+		- compatible: "mediatek,mt6331-keys"
+		- compatible: "mediatek,mt6397-keys"
 	see ../input/mtk-pmic-keys.txt
 
 - power-controller
@@ -54,6 +65,11 @@ Optional subnodes:
 		- compatible: "mediatek,mt6323-pwrc"
 	For details, see ../power/reset/mt6323-poweroff.txt
 
+- pin-controller
+	Required properties:
+		- compatible: "mediatek,mt6397-pinctrl"
+	For details, see ../pinctrl/pinctrl-mt65xx.txt
+
 Example:
 	pwrap: pwrap@1000f000 {
 		compatible = "mediatek,mt8135-pwrap";
diff --git a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
new file mode 100644
index 000000000000..59a630025f52
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/netronix,ntxec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Netronix Embedded Controller
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+
+description: |
+  This EC is found in e-book readers of multiple brands (e.g. Kobo, Tolino), and
+  is typically implemented as a TI MSP430 microcontroller.
+
+properties:
+  compatible:
+    const: netronix,ntxec
+
+  reg:
+    items:
+      - description: The I2C address of the EC
+
+  system-power-controller:
+    type: boolean
+    description: See Documentation/devicetree/bindings/power/power-controller.txt
+
+  interrupts:
+    minItems: 1
+    description:
+      The EC can signal interrupts via a GPIO line
+
+  "#pwm-cells":
+    const: 2
+    description: |
+      Number of cells in a PWM specifier.
+
+      The following PWM channels are supported:
+        - 0: The PWM channel controlled by registers 0xa1-0xa7
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ec: embedded-controller@43 {
+                    pinctrl-names = "default";
+                    pinctrl-0 = <&pinctrl_ntxec>;
+
+                    compatible = "netronix,ntxec";
+                    reg = <0x43>;
+                    system-power-controller;
+                    interrupt-parent = <&gpio4>;
+                    interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+                    #pwm-cells = <2>;
+            };
+    };
+
+    backlight {
+            compatible = "pwm-backlight";
+            pwms = <&ec 0 50000>;
+            power-supply = <&backlight_regulator>;
+    };
+
+    backlight_regulator: regulator-dummy {
+            compatible = "regulator-fixed";
+            regulator-name = "backlight";
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
new file mode 100644
index 000000000000..ec3138c1bbfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. PM8008 PMIC bindings
+
+maintainers:
+  - Guru Das Srinagesh <gurus@codeaurora.org>
+
+description: |
+  Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates
+  all the necessary power management, housekeeping, and interface support
+  functions into a single IC.
+
+properties:
+  compatible:
+    const: qcom,pm8008
+
+  reg:
+    description:
+      I2C slave address.
+
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+    description: Parent interrupt.
+
+  "#interrupt-cells":
+    const: 2
+
+    description: |
+      The first cell is the IRQ number, the second cell is the IRQ trigger
+      flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h.
+
+  interrupt-controller: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    type: object
+
+    description: |
+      The GPIO peripheral. This node may be specified twice, one for each GPIO.
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,pm8008-gpio
+          - const: qcom,spmi-gpio
+
+      reg:
+        description: Peripheral address of one of the two GPIO peripherals.
+        maxItems: 1
+
+      gpio-controller: true
+
+      gpio-ranges:
+        maxItems: 1
+
+      interrupt-controller: true
+
+      "#interrupt-cells":
+        const: 2
+
+      "#gpio-cells":
+        const: 2
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - interrupt-controller
+      - "#gpio-cells"
+      - gpio-ranges
+      - "#interrupt-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/mfd/qcom-pm8008.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    qupv3_se13_i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pm8008i@8 {
+        compatible = "qcom,pm8008";
+        reg = <0x8>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+
+        pm8008_gpios: gpio@c000 {
+          compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
+          reg = <0xc000>;
+          gpio-controller;
+          gpio-ranges = <&pm8008_gpios 0 0 2>;
+          #gpio-cells = <2>;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
deleted file mode 100644
index fffc8fde3302..000000000000
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-          Qualcomm SPMI PMICs multi-function device bindings
-
-The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
-PMICs.  These PMICs use a QPNP scheme through SPMI interface.
-QPNP is effectively a partitioning scheme for dividing the SPMI extended
-register space up into logical pieces, and set of fixed register
-locations/definitions within these regions, with some of these regions
-specifically used for interrupt handling.
-
-The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
-interfaced to the chip via the SPMI (System Power Management Interface) bus.
-Support for multiple independent functions are implemented by splitting the
-16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
-each. A function can consume one or more of these fixed-size register regions.
-
-Required properties:
-- compatible:      Should contain one of:
-                   "qcom,pm8941",
-                   "qcom,pm8841",
-                   "qcom,pma8084",
-                   "qcom,pm8019",
-                   "qcom,pm8226",
-                   "qcom,pm8110",
-                   "qcom,pma8084",
-                   "qcom,pmi8962",
-                   "qcom,pmd9635",
-                   "qcom,pm8994",
-                   "qcom,pmi8994",
-                   "qcom,pm8916",
-                   "qcom,pm8004",
-                   "qcom,pm8909",
-                   "qcom,pm8950",
-                   "qcom,pmi8950",
-                   "qcom,pm8998",
-                   "qcom,pmi8998",
-                   "qcom,pm8005",
-                   or generalized "qcom,spmi-pmic".
-- reg:             Specifies the SPMI USID slave address for this device.
-                   For more information see:
-                   Documentation/devicetree/bindings/spmi/spmi.txt
-
-Required properties for peripheral child nodes:
-- compatible:      Should contain "qcom,xxx", where "xxx" is a peripheral name.
-
-Optional properties for peripheral child nodes:
-- interrupts:      Interrupts are specified as a 4-tuple. For more information
-                   see:
-                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
-- interrupt-names: Corresponding interrupt name to the interrupts property
-
-Each child node of SPMI slave id represents a function of the PMIC. In the
-example below the rtc device node represents a peripheral of pm8941
-SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
-
-Example:
-
-	spmi {
-		compatible = "qcom,spmi-pmic-arb";
-
-		pm8941@0 {
-			compatible = "qcom,pm8941", "qcom,spmi-pmic";
-			reg = <0x0 SPMI_USID>;
-
-			rtc {
-				compatible = "qcom,rtc";
-				interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-				interrupt-names = "alarm";
-			};
-		};
-
-		pm8941@1 {
-			compatible = "qcom,pm8941", "qcom,spmi-pmic";
-			reg = <0x1 SPMI_USID>;
-
-			regulator {
-				compatible = "qcom,regulator";
-				regulator-name = "8941_boost";
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
new file mode 100644
index 000000000000..6a3e3ede1ede
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -0,0 +1,296 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI PMICs multi-function device
+
+description: |
+  Some Qualcomm PMICs used with the Snapdragon series SoCs are interfaced
+  to the chip via the SPMI (System Power Management Interface) bus.
+  Support for multiple independent functions are implemented by splitting the
+  16-bit SPMI peripheral address space into 256 smaller fixed-size regions, 256 bytes
+  each. A function can consume one or more of these fixed-size register regions.
+
+  The Qualcomm SPMI series includes the PM8941, PM8841, PMA8084, PM8998 and other
+  PMICs.  These PMICs use a "QPNP" scheme through SPMI interface.
+  QPNP is effectively a partitioning scheme for dividing the SPMI extended
+  register space up into logical pieces, and set of fixed register
+  locations/definitions within these regions, with some of these regions
+  specifically used for interrupt handling.
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+  $nodename:
+    oneOf:
+      - pattern: '^pmic@.*$'
+      - pattern: '^pm(a|s)?[0-9]*@.*$'
+        deprecated: true
+
+  compatible:
+    items:
+      - enum:
+          - qcom,pm6150
+          - qcom,pm6150l
+          - qcom,pm6350
+          - qcom,pm660
+          - qcom,pm660l
+          - qcom,pm7250b
+          - qcom,pm7325
+          - qcom,pm8004
+          - qcom,pm8005
+          - qcom,pm8009
+          - qcom,pm8019
+          - qcom,pm8028
+          - qcom,pm8110
+          - qcom,pm8150
+          - qcom,pm8150b
+          - qcom,pm8150c
+          - qcom,pm8150l
+          - qcom,pm8226
+          - qcom,pm8350
+          - qcom,pm8350b
+          - qcom,pm8350c
+          - qcom,pm8841
+          - qcom,pm8909
+          - qcom,pm8916
+          - qcom,pm8941
+          - qcom,pm8950
+          - qcom,pm8953
+          - qcom,pm8994
+          - qcom,pm8998
+          - qcom,pma8084
+          - qcom,pmd9635
+          - qcom,pmi8950
+          - qcom,pmi8962
+          - qcom,pmi8994
+          - qcom,pmi8998
+          - qcom,pmk8002
+          - qcom,pmk8350
+          - qcom,pmm8155au
+          - qcom,pmp8074
+          - qcom,pmr735a
+          - qcom,pmr735b
+          - qcom,pms405
+          - qcom,pmx55
+          - qcom,pmx65
+          - qcom,smb2351
+      - const: qcom,spmi-pmic
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  labibb:
+    type: object
+    $ref: /schemas/regulator/qcom-labibb-regulator.yaml#
+
+  regulators:
+    type: object
+    $ref: /schemas/regulator/qcom,spmi-regulator.yaml#
+
+patternProperties:
+  "^adc@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml#
+
+  "^adc-tm@[0-9a-f]+$":
+    type: object
+    # ref depends on compatible, see allOf below
+
+  "^audio-codec@[0-9a-f]+$":
+    type: object
+    additionalProperties: true # FIXME qcom,pm8916-wcd-analog-codec binding not converted yet
+
+  "extcon@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/extcon/qcom,pm8941-misc.yaml#
+
+  "gpio(s)?@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml#
+
+  "pon@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/power/reset/qcom,pon.yaml#
+
+  "pwm@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/leds/leds-qcom-lpg.yaml#
+
+  "^rtc@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml#
+
+  "^temp-alarm@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml#
+
+  "^vibrator@[0-9a-f]+$":
+    type: object
+    additionalProperties: true # FIXME qcom,pm8916-vib binding not converted yet
+
+  "^mpps@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/qcom,pmic-mpp.yaml#
+
+  "(.*)?(wled|leds)@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/leds/backlight/qcom-wled.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8998
+    then:
+      patternProperties:
+        "^adc-tm@[0-9a-f]+$":
+          $ref: /schemas/thermal/qcom-spmi-adc-tm-hc.yaml#
+    else:
+      patternProperties:
+        "^adc-tm@[0-9a-f]+$":
+          $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spmi@c440000 {
+        compatible = "qcom,spmi-pmic-arb";
+        reg = <0x0c440000 0x1100>,
+              <0x0c600000 0x2000000>,
+              <0x0e600000 0x100000>,
+              <0x0e700000 0xa0000>,
+              <0x0c40a000 0x26000>;
+        reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+        interrupt-names = "periph_irq";
+        interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+        qcom,ee = <0>;
+        qcom,channel = <0>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        interrupt-controller;
+        #interrupt-cells = <4>;
+
+        pmi8998_lsid0: pmic@2 {
+            compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+            reg = <0x2 SPMI_USID>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pmi8998_gpio: gpios@c000 {
+                compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+                reg = <0xc000>;
+                gpio-controller;
+                gpio-ranges = <&pmi8998_gpio 0 0 14>;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/iio/qcom,spmi-vadc.h>
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@0 {
+        compatible = "qcom,pm6150", "qcom,spmi-pmic";
+        reg = <0x0 SPMI_USID>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pon@800 {
+            compatible = "qcom,pm8998-pon";
+            reg = <0x800>;
+            mode-bootloader = <0x2>;
+            mode-recovery = <0x1>;
+
+            pwrkey {
+                compatible = "qcom,pm8941-pwrkey";
+                interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+                debounce = <15625>;
+                bias-pull-up;
+                linux,code = <KEY_POWER>;
+            };
+        };
+
+        temp-alarm@2400 {
+            compatible = "qcom,spmi-temp-alarm";
+            reg = <0x2400>;
+            interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+            io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+            io-channel-names = "thermal";
+            #thermal-sensor-cells = <0>;
+        };
+
+        pm6150_adc: adc@3100 {
+            compatible = "qcom,spmi-adc5";
+            reg = <0x3100>;
+            interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            adc-chan@6 {
+                reg = <ADC5_DIE_TEMP>;
+                label = "die_temp";
+            };
+
+            adc-chan@4f {
+                reg = <ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+
+        adc-tm@3500 {
+            compatible = "qcom,spmi-adc-tm5";
+            reg = <0x3500>;
+            interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            charger-thermistor@0 {
+                reg = <0>;
+                io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+
+        pm6150_gpio: gpios@c000 {
+            compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+            reg = <0xc000>;
+            gpio-controller;
+            gpio-ranges = <&pm6150_gpio 0 0 10>;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt b/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt
deleted file mode 100644
index e90519d566a3..000000000000
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-QCOM Top Control and Status Register
-
-Qualcomm devices have a set of registers that provide various control and status
-functions for their peripherals.  This node is intended to allow access to these
-registers via syscon.
-
-Required properties:
-- compatible:	Should contain:
-		"qcom,tcsr-ipq8064", "syscon" for IPQ8064
-		"qcom,tcsr-apq8064", "syscon" for APQ8064
-		"qcom,tcsr-msm8660", "syscon" for MSM8660
-		"qcom,tcsr-msm8960", "syscon" for MSM8960
-		"qcom,tcsr-msm8974", "syscon" for MSM8974
-		"qcom,tcsr-apq8084", "syscon" for APQ8084
-		"qcom,tcsr-msm8916", "syscon" for MSM8916
-- reg: Address range for TCSR registers
-
-Example:
-	tcsr: syscon@1a400000 {
-		compatible = "qcom,tcsr-msm8960", "syscon";
-		reg = <0x1a400000 0x100>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
new file mode 100644
index 000000000000..b12809b5cc22
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,tcsr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Top Control and Status Register
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm devices have a set of registers that provide various control and
+  status functions for their peripherals.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,msm8998-tcsr
+          - qcom,qcs404-tcsr
+          - qcom,sc7180-tcsr
+          - qcom,sc7280-tcsr
+          - qcom,sdm630-tcsr
+          - qcom,sdm845-tcsr
+          - qcom,sm8150-tcsr
+          - qcom,tcsr-apq8064
+          - qcom,tcsr-apq8084
+          - qcom,tcsr-ipq6018
+          - qcom,tcsr-ipq8064
+          - qcom,tcsr-mdm9615
+          - qcom,tcsr-msm8660
+          - qcom,tcsr-msm8916
+          - qcom,tcsr-msm8953
+          - qcom,tcsr-msm8960
+          - qcom,tcsr-msm8974
+          - qcom,tcsr-msm8996
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1a400000 {
+        compatible = "qcom,tcsr-msm8960", "syscon";
+        reg = <0x1a400000 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
deleted file mode 100644
index 9e5eba4a4f0d..000000000000
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Qualcomm PM8xxx PMIC multi-function devices
-
-The PM8xxx family of Power Management ICs are used to provide regulated
-voltages and other various functionality to Qualcomm SoCs.
-
-= PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8058"
-		    "qcom,pm8821"
-		    "qcom,pm8921"
-
-- #address-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 1
-
-- #size-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 0
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: specifies the interrupt that indicates a subdevice
-		    has generated an interrupt (summary interrupt). The
-		    format of the specifier is defined by the binding document
-		    describing the node's interrupt parent.
-
-- #interrupt-cells:
-	Usage: required
-	Value type : <u32>
-	Definition: must be 2. Specifies the number of cells needed to encode
-		    an interrupt source. The 1st cell contains the interrupt
-		    number. The 2nd cell is the trigger type and level flags
-		    encoded as follows:
-
-			1 = low-to-high edge triggered
-			2 = high-to-low edge triggered
-			4 = active high level-sensitive
-			8 = active low level-sensitive
-
-- interrupt-controller:
-	Usage: required
-	Value type: <empty>
-	Definition: identifies this node as an interrupt controller
-
-= SUBCOMPONENTS
-
-The PMIC contains multiple independent functions, each described in a subnode.
-The below bindings specify the set of valid subnodes.
-
-== Real-Time Clock
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8058-rtc"
-		    "qcom,pm8921-rtc"
-		    "qcom,pm8941-rtc"
-		    "qcom,pm8018-rtc"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: single entry specifying the base address of the RTC registers
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: single entry specifying the RTC's alarm interrupt
-
-- allow-set-time:
-	Usage: optional
-	Value type: <empty>
-	Definition: indicates that the setting of RTC time is allowed by
-		    the host CPU
-
-= EXAMPLE
-
-	pmicintc: pmic@0 {
-		compatible = "qcom,pm8921";
-		interrupts = <104 8>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc@11d {
-			compatible = "qcom,pm8921-rtc";
-			reg = <0x11d>;
-			interrupts = <0x27 0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
new file mode 100644
index 000000000000..61bd0b3ce02f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC multi-function devices
+
+maintainers:
+  - Satya Priya <quic_c_skakit@quicinc.com>
+
+description: |
+  The PM8xxx family of Power Management ICs are used to provide regulated
+  voltages and other various functionality to Qualcomm SoCs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8018
+      - qcom,pm8058
+      - qcom,pm8821
+      - qcom,pm8921
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+patternProperties:
+  "rtc@[0-9a-f]+$":
+    type: object
+    $ref: "../rtc/qcom-pm8xxx-rtc.yaml"
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+
+additionalProperties: false
+...
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index 3c91ad430eea..b823b8625243 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -61,6 +61,7 @@ Regulator nodes are identified by their compatible:
 		    "qcom,rpm-pm8901-regulators"
 		    "qcom,rpm-pm8921-regulators"
 		    "qcom,rpm-pm8018-regulators"
+		    "qcom,rpm-smb208-regulators"
 
 - vdd_l0_l1_lvs-supply:
 - vdd_l2_l11_l12-supply:
@@ -171,6 +172,9 @@ pm8018:
 	s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
 	l12, l14, lvs1
 
+smb208:
+	s1a, s1b, s2a, s2b
+
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt - with additional custom properties described below:
 
diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml
new file mode 100644
index 000000000000..4762eb1439ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/richtek,rt4831.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4831 DSV and Backlight Integrated IC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  RT4831 is a multifunctional device that can provide power to the LCD display
+  and LCD backlight.
+
+  For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V.
+  It's sufficient to meet the current LCD power requirement.
+
+  For the LCD backlight, it can provide four channel WLED driving capability.
+  Each channel driving current is up to 30mA
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf
+
+properties:
+  compatible:
+    const: richtek,rt4831
+
+  reg:
+    description: I2C device address.
+    maxItems: 1
+
+  enable-gpios:
+    description: |
+      GPIO to enable/disable the chip. It is optional.
+      Some usage directly tied this pin to follow VIO 1.8V power on sequence.
+    maxItems: 1
+
+  regulators:
+    $ref: ../regulator/richtek,rt4831-regulator.yaml
+
+  backlight:
+    $ref: ../leds/backlight/richtek,rt4831-backlight.yaml
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/rt4831-backlight.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt4831@11 {
+        compatible = "richtek,rt4831";
+        reg = <0x11>;
+
+        regulators {
+          DSVLCM {
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <7150000>;
+            regulator-allow-bypass;
+          };
+          DSVP {
+            regulator-name = "rt4831-dsvp";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6500000>;
+            regulator-boot-on;
+          };
+          DSVN {
+            regulator-name = "rt4831-dsvn";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6500000>;
+            regulator-boot-on;
+          };
+        };
+
+        backlight {
+          compatible = "richtek,rt4831-backlight";
+          default-brightness = <1024>;
+          max-brightness = <2048>;
+          richtek,bled-ovp-sel = /bits/ 8 <RT4831_BLOVPLVL_21V>;
+          richtek,channel-use = /bits/ 8 <RT4831_BLED_ALLCHEN>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml
new file mode 100644
index 000000000000..f73b8b25d7d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/richtek,rt5120.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5120 PMIC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5120 provides four high-efficiency buck converters and one LDO voltage
+  regulator. The device is targeted at providingthe processor voltage, memory,
+  I/O, and peripheral rails in home entertainment devices. The I2C interface is
+  used for dynamic voltage scaling of the processor voltage, power rails on/off
+  sequence control, operation mode selection.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5120
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  wakeup-source: true
+
+  richtek,enable-undervolt-hiccup:
+    type: boolean
+    description: |
+      If used, under voltage protection trigger hiccup behavior, else latchup as
+      default
+
+  richtek,enable-overvolt-hiccup:
+    type: boolean
+    description:
+      Like as 'enable-uv-hiccup', it configures over voltage protection to
+      hiccup, else latchup as default
+
+  vin1-supply:
+    description: phandle for buck1 input power source
+
+  vin2-supply:
+    description: phandle for buck2 input power source
+
+  vin3-supply:
+    description: phandle for buck3 input power source
+
+  vin4-supply:
+    description: phandle for buck4 input power source
+
+  vinldo-supply:
+    description: phandle for ldo input power source
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[1-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          regulator-allowed-modes:
+            description: |
+              Used to specify the allowed buck converter operating mode
+              mode mapping:
+                0: auto mode
+                1: force pwm mode
+            items:
+              enum: [0, 1]
+
+      "^(ldo|exten)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+  powerkey:
+    type: object
+    description:
+      PON key that connected to RT5120 PMIC.
+
+    properties:
+      compatible:
+        enum:
+          - richtek,rt5120-pwrkey
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+  - regulators
+  - powerkey
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@62 {
+        compatible = "richtek,rt5120";
+        reg = <0x62>;
+        interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        wakeup-source;
+
+        regulators {
+          buck1 {
+            regulator-name = "rt5120-buck1";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <1393750>;
+            regulator-allowed-modes = <0 1>;
+            regulator-boot-on;
+          };
+          buck2 {
+            regulator-name = "rt5120-buck2";
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1100000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          buck3 {
+            regulator-name = "rt5120-buck3";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          buck4 {
+            regulator-name = "rt5120-buck4";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          ldo {
+            regulator-name = "rt5120-ldo";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+          exten {
+            regulator-name = "rt5120-exten";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+        };
+        powerkey {
+          compatible = "richtek,rt5120-pwrkey";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
new file mode 100644
index 000000000000..032a7fb0b4a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ricoh,rn5t618.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ricoh RN5T567/RN5T618/RC5T619 PMIC
+
+maintainers:
+  - Andreas Kemnade <andreas@kemnade.info>
+
+description: |
+  Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which
+  integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators,
+  GPIOs, and a watchdog timer. It can be controlled through an I2C interface.
+  The RN5T618/RC5T619 provides additionally a Li-ion battery charger,
+  fuel gauge, and an ADC.
+  The RC5T619 additionally includes USB charger detection and an RTC.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ricoh,rn5t567
+    then:
+      properties:
+        regulators:
+          patternProperties:
+            "^(DCDC[1-4]|LDO[1-5]|LDORTC[12])$":
+              $ref: ../regulator/regulator.yaml
+          additionalProperties: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ricoh,rn5t618
+    then:
+      properties:
+        regulators:
+          patternProperties:
+            "^(DCDC[1-3]|LDO[1-5]|LDORTC[12])$":
+              $ref: ../regulator/regulator.yaml
+          additionalProperties: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ricoh,rc5t619
+    then:
+      properties:
+        regulators:
+          patternProperties:
+            "^(DCDC[1-5]|LDO[1-9]|LDO10|LDORTC[12])$":
+              $ref: ../regulator/regulator.yaml
+          additionalProperties: false
+
+properties:
+  compatible:
+    enum:
+      - ricoh,rn5t567
+      - ricoh,rn5t618
+      - ricoh,rc5t619
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  system-power-controller:
+    type: boolean
+    description: |
+      See Documentation/devicetree/bindings/power/power-controller.txt
+
+  regulators:
+    type: object
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@32 {
+        compatible = "ricoh,rn5t618";
+        reg = <0x32>;
+        interrupt-parent = <&gpio5>;
+        interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+        system-power-controller;
+
+        regulators {
+          DCDC1 {
+            regulator-min-microvolt = <1050000>;
+            regulator-max-microvolt = <1050000>;
+          };
+
+          DCDC2 {
+            regulator-min-microvolt = <1175000>;
+            regulator-max-microvolt = <1175000>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
deleted file mode 100644
index 04df07f6f793..000000000000
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ /dev/null
@@ -1,277 +0,0 @@
-RK8XX Power Management Integrated Circuit
-
-The rk8xx family current members:
-rk805
-rk808
-rk809
-rk817
-rk818
-
-Required properties:
-- compatible: "rockchip,rk805"
-- compatible: "rockchip,rk808"
-- compatible: "rockchip,rk809"
-- compatible: "rockchip,rk817"
-- compatible: "rockchip,rk818"
-- reg: I2C slave address
-- interrupts: the interrupt outputs of the controller.
-- #clock-cells: from common clock binding; shall be set to 1 (multiple clock
-  outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
-
-Optional properties:
-- clock-output-names: From common clock binding to override the
-  default output clock name
-- rockchip,system-power-controller: Telling whether or not this pmic is controlling
-  the system power.
-
-Optional RK805 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- vcc5-supply:  The input supply for LDO_REG1 and LDO_REG2
-- vcc6-supply:  The input supply for LDO_REG3
-
-Optional RK808 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
-- vcc7-supply:  The input supply for LDO_REG3 and LDO_REG7
-- vcc8-supply:  The input supply for SWITCH_REG1
-- vcc9-supply:  The input supply for LDO_REG4 and LDO_REG5
-- vcc10-supply: The input supply for LDO_REG6
-- vcc11-supply: The input supply for LDO_REG8
-- vcc12-supply: The input supply for SWITCH_REG2
-- dvs-gpios:  buck1/2 can be controlled by gpio dvs, this is GPIO specifiers
-  for 2 host gpio's used for dvs. The format of the gpio specifier depends in
-  the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
-  very quickly with no slow ramp time.
-
-Optional shared RK809 and RK817 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- vcc5-supply:  The input supply for LDO_REG1, LDO_REG2, LDO_REG3
-- vcc6-supply:  The input supply for LDO_REG4, LDO_REG5, LDO_REG6
-- vcc7-supply:  The input supply for LDO_REG7, LDO_REG8, LDO_REG9
-
-Optional RK809 properties:
-- vcc8-supply:  The input supply for SWITCH_REG1
-- vcc9-supply:  The input supply for DCDC_REG5, SWITCH_REG2
-
-Optional RK817 properties:
-- vcc8-supply:  The input supply for BOOST
-- vcc9-supply:  The input supply for OTG_SWITCH
-
-Optional RK818 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- boost-supply: The input supply for DCDC_BOOST
-- vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
-- vcc7-supply:  The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
-- vcc8-supply:  The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
-- vcc9-supply:  The input supply for LDO_REG9 and SWITCH_REG
-- h_5v-supply:  The input supply for HDMI_SWITCH
-- usb-supply:   The input supply for OTG_SWITCH
-
-Regulators: All the regulators of RK8XX to be instantiated shall be
-listed in a child node named 'regulators'. Each regulator is represented
-by a child node of the 'regulators' node.
-
-	regulator-name {
-		/* standard regulator bindings here */
-	};
-
-Following regulators of the RK805 PMIC regulators are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK805 datasheet.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 4.
-	- LDO_REGn
-		- valid values for n are 1 to 3
-
-Following regulators of the RK808 PMIC block are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK808 datasheet.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 4.
-	- LDO_REGn
-		- valid values for n are 1 to 8.
-	- SWITCH_REGn
-		- valid values for n are 1 to 2
-
-Following regulators of the RK809 and RK817 PMIC blocks are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK809 and RK817 datasheets.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 5 for RK809.
-		- valid values for n are 1 to 4 for RK817.
-	- LDO_REGn
-		- valid values for n are 1 to 9 for RK809.
-		- valid values for n are 1 to 9 for RK817.
-	- SWITCH_REGn
-		- valid values for n are 1 to 2 for RK809.
-	- BOOST for RK817
-	- OTG_SWITCH for RK817
-
-Following regulators of the RK818 PMIC block are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK818 datasheet.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 4.
-	- LDO_REGn
-		- valid values for n are 1 to 9.
-	- SWITCH_REG
-	- HDMI_SWITCH
-	- OTG_SWITCH
-
-It is necessary to configure three pins for both the RK809 and RK817, the three
-pins are "gpio_ts" "gpio_gt" "gpio_slp".
-	The gpio_gt and gpio_ts pins support the gpio function.
-	The gpio_slp pin is for controlling the pmic states, as below:
-		- reset
-		- power down
-		- sleep
-
-Standard regulator bindings are used inside regulator subnodes. Check
-  Documentation/devicetree/bindings/regulator/regulator.txt
-for more details
-
-Example:
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		clock-output-names = "xin32k", "rk808-clkout2";
-		interrupt-parent = <&gpio0>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
-		dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
-			    <&gpio7 15 GPIO_ACTIVE_HIGH>;
-		reg = <0x1b>;
-		rockchip,system-power-controller;
-		wakeup-source;
-		#clock-cells = <1>;
-
-		vcc8-supply = <&vcc_18>;
-		vcc9-supply = <&vcc_io>;
-		vcc10-supply = <&vcc_io>;
-		vcc12-supply = <&vcc_io>;
-		vddio-supply = <&vccio_pmu>;
-
-		regulators {
-			vdd_cpu: DCDC_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-name = "vdd_arm";
-			};
-
-			vdd_gpu: DCDC_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-name = "vdd_gpu";
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_ddr";
-			};
-
-			vcc_io: DCDC_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_io";
-			};
-
-			vccio_pmu: LDO_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_pmu";
-			};
-
-			vcc_tp: LDO_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_tp";
-			};
-
-			vdd_10: LDO_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd_10";
-			};
-
-			vcc18_lcd: LDO_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_lcd";
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_sd";
-			};
-
-			vdd10_lcd: LDO_REG6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd10_lcd";
-			};
-
-			vcc_18: LDO_REG7 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_18";
-			};
-
-			vcca_codec: LDO_REG8 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcca_codec";
-			};
-
-			vcc_wl: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_wl";
-			};
-
-			vcc_lcd: SWITCH_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_lcd";
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt
deleted file mode 100644
index b74e5e94d1cb..000000000000
--- a/Documentation/devicetree/bindings/mfd/rn5t618.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Ricoh RN5T567/RN5T618 PMIC
-
-Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which
-integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators,
-GPIOs, and a watchdog timer. It can be controlled through an I2C interface.
-The RN5T618/RC5T619 provides additionally a Li-ion battery charger,
-fuel gauge, and an ADC.
-The RC5T619 additionnally includes USB charger detection and an RTC.
-
-Required properties:
- - compatible: must be one of
-		"ricoh,rn5t567"
-		"ricoh,rn5t618"
-		"ricoh,rc5t619"
- - reg: the I2C slave address of the device
-
-Optional properties:
- - system-power-controller:
-   See Documentation/devicetree/bindings/power/power-controller.txt
-
-Sub-nodes:
- - regulators: the node is required if the regulator functionality is
-   needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
-   (RN5T567/RC5T619), LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, LDO8,
-   LDO9, LDO10, LDORTC1 and LDORTC2.
-   LDO7-10 are specific to RC5T619.
-   The common bindings for each individual regulator can be found in:
-   Documentation/devicetree/bindings/regulator/regulator.txt
-
-Example:
-
-	pmic@32 {
-		compatible = "ricoh,rn5t618";
-		reg = <0x32>;
-		system-power-controller;
-
-		regulators {
-			DCDC1 {
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1050000>;
-			};
-
-			DCDC2 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
new file mode 100644
index 000000000000..4992f71b6fc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK805 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD
+  that includes multiple switchable regulators.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk805
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    minimum: 0
+    maximum: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc5-supply:
+    description:
+      The input supply for LDO_REG1 and LDO_REG2.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG3.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(DCDC_REG[1-4]|LDO_REG[1-3])$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        '#clock-cells':
+          const: 0
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@18 {
+            compatible = "rockchip,rk805";
+            reg = <0x18>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int_l>;
+            rockchip,system-power-controller;
+            wakeup-source;
+            #clock-cells = <0>;
+
+            vcc1-supply = <&vcc_sys>;
+            vcc2-supply = <&vcc_sys>;
+            vcc3-supply = <&vcc_sys>;
+            vcc4-supply = <&vcc_sys>;
+            vcc5-supply = <&vcc_io>;
+            vcc6-supply = <&vcc_io>;
+
+            regulators {
+                vdd_logic: DCDC_REG1 {
+                    regulator-name = "vdd_logic";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vdd_arm: DCDC_REG2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <950000>;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_io: DCDC_REG4 {
+                    regulator-name = "vcc_io";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vdd_18: LDO_REG1 {
+                    regulator-name = "vdd_18";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc18_emmc: LDO_REG2 {
+                    regulator-name = "vcc_18emmc";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_11: LDO_REG3 {
+                    regulator-name = "vdd_11";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1100000>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
new file mode 100644
index 000000000000..f5908fa01a61
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
@@ -0,0 +1,257 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK808 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, and a power button.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk808
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    const: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+    maxItems: 2
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG1 and LDO_REG2.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG3 and LDO_REG7.
+
+  vcc8-supply:
+    description:
+      The input supply for SWITCH_REG1.
+
+  vcc9-supply:
+    description:
+      The input supply for LDO_REG4 and LDO_REG5.
+
+  vcc10-supply:
+    description:
+      The input supply for LDO_REG6.
+
+  vcc11-supply:
+    description:
+      The input supply for LDO_REG8.
+
+  vcc12-supply:
+    description:
+      The input supply for SWITCH_REG2.
+
+  vddio-supply:
+    description:
+      The input supply for digital IO.
+
+  dvs-gpios:
+    description: |
+      buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for
+      2 host gpio's used for dvs. The format of the gpio specifier
+      depends in the gpio controller. If DVS GPIOs aren't present,
+      voltage changes will happen very quickly with no slow ramp time.
+    maxItems: 2
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk808: pmic@1b {
+            compatible = "rockchip,rk808";
+            clock-output-names = "xin32k", "rk808-clkout2";
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
+            dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
+                <&gpio7 15 GPIO_ACTIVE_HIGH>;
+            reg = <0x1b>;
+            rockchip,system-power-controller;
+            wakeup-source;
+            #clock-cells = <1>;
+
+            vcc8-supply = <&vcc_18>;
+            vcc9-supply = <&vcc_io>;
+            vcc10-supply = <&vcc_io>;
+            vcc12-supply = <&vcc_io>;
+            vddio-supply = <&vccio_pmu>;
+
+            regulators {
+                vdd_cpu: DCDC_REG1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-name = "vdd_arm";
+                };
+
+                vdd_gpu: DCDC_REG2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-name = "vdd_gpu";
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vcc_ddr";
+                };
+
+                vcc_io: DCDC_REG4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcc_io";
+                };
+
+                vccio_pmu: LDO_REG1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vccio_pmu";
+                };
+
+                vcc_tp: LDO_REG2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcc_tp";
+                };
+
+                vdd_10: LDO_REG3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-name = "vdd_10";
+                };
+
+                vcc18_lcd: LDO_REG4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-name = "vcc18_lcd";
+                };
+
+                vccio_sd: LDO_REG5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vccio_sd";
+                };
+
+                vdd10_lcd: LDO_REG6 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-name = "vdd10_lcd";
+                };
+
+                vcc_18: LDO_REG7 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-name = "vcc_18";
+                };
+
+                vcca_codec: LDO_REG8 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcca_codec";
+                };
+
+                vcc_wl: SWITCH_REG1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vcc_wl";
+                };
+
+                vcc_lcd: SWITCH_REG2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vcc_lcd";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
new file mode 100644
index 000000000000..7fb849ac74a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
@@ -0,0 +1,284 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK809 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, and power button.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk809
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description: |
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    minimum: 0
+    maximum: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc5-supply:
+    description:
+      The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
+
+  vcc8-supply:
+    description:
+      The input supply for SWITCH_REG1.
+
+  vcc9-supply:
+    description:
+      The input supply for DCDC_REG5 and SWITCH_REG2.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        '#clock-cells':
+          const: 0
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk808: pmic@1b {
+            compatible = "rockchip,rk808";
+            reg = <0x1b>;
+            #clock-cells = <1>;
+            clock-output-names = "xin32k", "rk808-clkout2";
+            interrupt-parent = <&gpio3>;
+            interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int_l_pin>;
+            rockchip,system-power-controller;
+            wakeup-source;
+
+            vcc1-supply = <&vcc_sysin>;
+            vcc2-supply = <&vcc_sysin>;
+            vcc3-supply = <&vcc_sysin>;
+            vcc4-supply = <&vcc_sysin>;
+            vcc6-supply = <&vcc_sysin>;
+            vcc7-supply = <&vcc_sysin>;
+            vcc8-supply = <&vcc3v3_sys>;
+            vcc9-supply = <&vcc_sysin>;
+            vcc10-supply = <&vcc_sysin>;
+            vcc11-supply = <&vcc_sysin>;
+            vcc12-supply = <&vcc3v3_sys>;
+
+            regulators {
+                vdd_center: DCDC_REG1 {
+                    regulator-name = "vdd_center";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_cpu_l: DCDC_REG2 {
+                    regulator-name = "vdd_cpu_l";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_1v8: vcc_wl: DCDC_REG4 {
+                    regulator-name = "vcc_1v8";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc1v8_pmupll: LDO_REG3 {
+                    regulator-name = "vcc1v8_pmupll";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc_sdio: LDO_REG4 {
+                    regulator-name = "vcc_sdio";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3000000>;
+                    };
+                };
+
+                vcca3v0_codec: LDO_REG5 {
+                    regulator-name = "vcca3v0_codec";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_1v5: LDO_REG6 {
+                    regulator-name = "vcc_1v5";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1500000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1500000>;
+                    };
+                };
+
+                vcca1v8_codec: LDO_REG7 {
+                    regulator-name = "vcca1v8_codec";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_3v0: LDO_REG8 {
+                    regulator-name = "vcc_3v0";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3000000>;
+                    };
+                };
+
+                vcc3v3_s3: SWITCH_REG1 {
+                    regulator-name = "vcc3v3_s3";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc3v3_s0: SWITCH_REG2 {
+                    regulator-name = "vcc3v3_s0";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml
new file mode 100644
index 000000000000..935e17099213
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml
@@ -0,0 +1,382 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK817 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, a power button, an audio codec, and a
+  battery charger manager.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk817
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    minimum: 0
+    maximum: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc5-supply:
+    description:
+      The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
+
+  vcc8-supply:
+    description:
+      The input supply for BOOST.
+
+  vcc9-supply:
+    description:
+      The input supply for OTG_SWITCH.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$":
+        type: object
+        unevaluatedProperties: false
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  clocks:
+    description:
+      The input clock for the audio codec.
+
+  clock-names:
+    description:
+      The clock name for the codec clock.
+    items:
+      - const: mclk
+
+  '#sound-dai-cells':
+    description:
+      Needed for the interpretation of sound dais.
+    const: 0
+
+  codec:
+    description: |
+      The child node for the codec to hold additional properties. If no
+      additional properties are required for the codec, this node can be
+      omitted.
+    type: object
+    additionalProperties: false
+    properties:
+      rockchip,mic-in-differential:
+        type: boolean
+        description:
+          Describes if the microphone uses differential mode.
+
+  charger:
+    description: |
+      The child node for the charger to hold additional properties. If a
+      battery is not in use, this node can be omitted.
+    type: object
+    properties:
+      monitored-battery:
+        description: |
+          A phandle to a monitored battery node that contains a valid
+          value for:
+          charge-full-design-microamp-hours,
+          charge-term-current-microamp,
+          constant-charge-current-max-microamp,
+          constant-charge-voltage-max-microvolt,
+          voltage-max-design-microvolt,
+          voltage-min-design-microvolt,
+          and a valid ocv-capacity table.
+
+      rockchip,resistor-sense-micro-ohms:
+        description: |
+          Value in microohms of the battery sense resistor. This value is
+          used by the driver to set the correct divisor value to translate
+          ADC readings into the proper units of measure.
+        enum: [10000, 20000]
+
+      rockchip,sleep-enter-current-microamp:
+        description: |
+          Value in microamps of the sleep enter current for the charger.
+          Value is used by the driver to calibrate the relax threshold.
+
+      rockchip,sleep-filter-current-microamp:
+        description:
+          Value in microamps of the sleep filter current for the charger.
+          Value is used by the driver to derive the sleep sample current.
+
+    required:
+      - monitored-battery
+      - rockchip,resistor-sense-micro-ohms
+      - rockchip,sleep-enter-current-microamp
+      - rockchip,sleep-filter-current-microamp
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        '#clock-cells':
+          const: 0
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk817: pmic@20 {
+            compatible = "rockchip,rk817";
+            reg = <0x20>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+            clock-output-names = "rk808-clkout1", "xin32k";
+            clock-names = "mclk";
+            clocks = <&cru SCLK_I2S1_OUT>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+            wakeup-source;
+            #clock-cells = <1>;
+            #sound-dai-cells = <0>;
+
+            vcc1-supply = <&vccsys>;
+            vcc2-supply = <&vccsys>;
+            vcc3-supply = <&vccsys>;
+            vcc4-supply = <&vccsys>;
+            vcc5-supply = <&vccsys>;
+            vcc6-supply = <&vccsys>;
+            vcc7-supply = <&vccsys>;
+
+            regulators {
+                vdd_logic: DCDC_REG1 {
+                    regulator-name = "vdd_logic";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1150000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <950000>;
+                    };
+                };
+
+                vdd_arm: DCDC_REG2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <950000>;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_3v3: DCDC_REG4 {
+                    regulator-name = "vcc_3v3";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_1v8: LDO_REG2 {
+                    regulator-name = "vcc_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_1v0: LDO_REG3 {
+                    regulator-name = "vdd_1v0";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vcc3v3_pmu: LDO_REG4 {
+                    regulator-name = "vcc3v3_pmu";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vccio_sd: LDO_REG5 {
+                    regulator-name = "vccio_sd";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_sd: LDO_REG6 {
+                    regulator-name = "vcc_sd";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_bl: LDO_REG7 {
+                    regulator-name = "vcc_bl";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_lcd: LDO_REG8 {
+                    regulator-name = "vcc_lcd";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <2800000>;
+                    };
+                };
+
+                vcc_cam: LDO_REG9 {
+                    regulator-name = "vcc_cam";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3000000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <3000000>;
+                    };
+                };
+            };
+
+            rk817_charger: charger {
+                monitored-battery = <&battery>;
+                rockchip,resistor-sense-micro-ohms = <10000>;
+                rockchip,sleep-enter-current-microamp = <300000>;
+                rockchip,sleep-filter-current-microamp = <100000>;
+            };
+
+            rk817_codec: codec {
+                rockchip,mic-in-differential;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml
new file mode 100644
index 000000000000..b57c4b005cf4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK818 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK818 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, and a power button.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk818
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description: |
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    const: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+    maxItems: 2
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  boost-supply:
+    description:
+      The input supply for DCDC_BOOST
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG1 and LDO_REG2.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG3, LDO_REG5, and LDO_REG7.
+
+  vcc8-supply:
+    description:
+      The input supply for LDO_REG4, LDO_REG6, and LDO_REG8.
+
+  vcc9-supply:
+    description:
+      The input supply for LDO_REG9 and SWITCH_REG.
+
+  vddio-supply:
+    description:
+      The input supply for digital IO.
+
+  h_5v-supply:
+    description:
+      The input supply for HDMI_SWITCH.
+
+  usb-supply:
+    description:
+      The input supply for OTG_SWITCH.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk818: pmic@1c {
+            compatible = "rockchip,rk818";
+            reg = <0x1c>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int>;
+            rockchip,system-power-controller;
+            wakeup-source;
+            #clock-cells = <1>;
+
+            vcc1-supply = <&vdd_sys>;
+            vcc2-supply = <&vdd_sys>;
+            vcc3-supply = <&vdd_sys>;
+            vcc4-supply = <&vdd_sys>;
+            boost-supply = <&vdd_in_otg_out>;
+            vcc6-supply = <&vdd_sys>;
+            vcc7-supply = <&vdd_misc_1v8>;
+            vcc8-supply = <&vdd_misc_1v8>;
+            vcc9-supply = <&vdd_3v3_io>;
+            vddio-supply = <&vdd_3v3_io>;
+
+            regulators {
+                vdd_log: DCDC_REG1 {
+                    regulator-name = "vdd_log";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_gpu: DCDC_REG2 {
+                    regulator-name = "vdd_gpu";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vdd_3v3_io: DCDC_REG4 {
+                    regulator-name = "vdd_3v3_io";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vdd_sys: DCDC_BOOST {
+                    regulator-name = "vdd_sys";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <5000000>;
+                    regulator-max-microvolt = <5000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <5000000>;
+                    };
+                };
+
+                vdd_sd: SWITCH_REG {
+                    regulator-name = "vdd_sd";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_eth_2v5: LDO_REG2 {
+                    regulator-name = "vdd_eth_2v5";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <2500000>;
+                    regulator-max-microvolt = <2500000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <2500000>;
+                    };
+                };
+
+                vdd_1v0: LDO_REG3 {
+                    regulator-name = "vdd_1v0";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vdd_1v8_lcd_ldo: LDO_REG4 {
+                    regulator-name = "vdd_1v8_lcd_ldo";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_1v0_lcd: LDO_REG6 {
+                    regulator-name = "vdd_1v0_lcd";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vdd_1v8_ldo: LDO_REG7 {
+                    regulator-name = "vdd_1v8_ldo";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_io_sd: LDO_REG9 {
+                    regulator-name = "vdd_io_sd";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
deleted file mode 100644
index c3c02ce73cde..000000000000
--- a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-* ROHM BD70528 Power Management Integrated Circuit bindings
-
-BD70528MWV is an ultra-low quiescent current general purpose, single-chip,
-power management IC for battery-powered portable devices. The IC
-integrates 3 ultra-low current consumption buck converters, 3 LDOs and 2
-LED Drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz
-clock gate, high-accuracy VREF for use with an external ADC, flexible
-dual-input power path, 10 bit SAR ADC for battery temperature monitor and
-1S battery charger with scalable charge currents.
-
-Required properties:
- - compatible		: Should be "rohm,bd70528"
- - reg			: I2C slave address.
- - interrupts		: The interrupt line the device is connected to.
- - interrupt-controller	: To indicate BD70528 acts as an interrupt controller.
- - #interrupt-cells	: Should be 2. Usage is compliant to the 2 cells
-			  variant of ../interrupt-controller/interrupts.txt
- - gpio-controller	: To indicate BD70528 acts as a GPIO controller.
- - #gpio-cells		: Should be 2. The first cell is the pin number and
-			  the second cell is used to specify flags. See
-			  ../gpio/gpio.txt for more information.
- - #clock-cells		: Should be 0.
- - regulators:		: List of child nodes that specify the regulators.
-			  Please see ../regulator/rohm,bd70528-regulator.txt
-
-Optional properties:
- - clock-output-names	: Should contain name for output clock.
-
-Example:
-/* External oscillator */
-osc: oscillator {
-	compatible = "fixed-clock";
-	#clock-cells = <1>;
-	clock-frequency  = <32768>;
-	clock-output-names = "osc";
-};
-
-pmic: pmic@4b {
-	compatible = "rohm,bd70528";
-	reg = <0x4b>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <29 GPIO_ACTIVE_LOW>;
-	clocks = <&osc 0>;
-	#clock-cells = <0>;
-	clock-output-names = "bd70528-32k-out";
-	#gpio-cells = <2>;
-	gpio-controller;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-
-	regulators {
-		buck1: BUCK1 {
-			regulator-name = "buck1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3400000>;
-			regulator-boot-on;
-			regulator-ramp-delay = <125>;
-		};
-		buck2: BUCK2 {
-			regulator-name = "buck2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-ramp-delay = <125>;
-		};
-		buck3: BUCK3 {
-			regulator-name = "buck3";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-ramp-delay = <250>;
-		};
-		ldo1: LDO1 {
-			regulator-name = "ldo1";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
-		ldo2: LDO2 {
-			regulator-name = "ldo2";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
-
-		ldo3: LDO3 {
-			regulator-name = "ldo3";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <3300000>;
-		};
-		led_ldo1: LED_LDO1 {
-			regulator-name = "led_ldo1";
-			regulator-min-microvolt = <200000>;
-			regulator-max-microvolt = <300000>;
-		};
-		led_ldo2: LED_LDO2 {
-			regulator-name = "led_ldo2";
-			regulator-min-microvolt = <200000>;
-			regulator-max-microvolt = <300000>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
new file mode 100644
index 000000000000..fbface720678
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71815-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71815 Power Management Integrated Circuit bindings
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  BD71815AGW is a single-chip power management ICs for battery-powered
+  portable devices. It integrates 5 buck converters, 8 LDOs, a boost driver
+  for LED and a 500 mA single-cell linear charger. Also included is a Coulomb
+  counter, a real-time clock (RTC), and a 32.768 kHz clock gate and two GPOs.
+
+properties:
+  compatible:
+    const: rohm,bd71815
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is the pin number and the second cell is used to specify
+      flags. See ../gpio/gpio.txt for more information.
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    const: bd71815-32k-out
+
+  rohm,clkout-open-drain:
+    description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 1
+
+  rohm,charger-sense-resistor-ohms:
+    minimum: 10000000
+    maximum: 50000000
+    description: |
+      BD71827 and BD71828 have SAR ADC for measuring charging currents.
+      External sense resistor (RSENSE in data sheet) should be used. If
+      something other but 30MOhm resistor is used the resistance value
+      should be given here in Ohms.
+    default: 30000000
+
+  regulators:
+    $ref: ../regulator/rohm,bd71815-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  gpio-reserved-ranges:
+    description: |
+      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      used to mark the pins which should not be configured for GPIO. Please see
+      the ../gpio/gpio.txt for more information.
+
+  rohm,enable-hidden-gpo:
+    description: |
+      The BD71815 has undocumented GPO at pin E5. Pin is marked as GND at the
+      data-sheet as its location in the middle of GND pins makes it hard to
+      use on PCB. If your board has managed to use this pin you can enable the
+      second GPO by defining this property. Dont enable this if you are unsure
+      about how the E5 pin is connected on your board.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#clock-cells"
+  - regulators
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd71815";
+            reg = <0x4b>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+            clocks = <&osc 0>;
+            #clock-cells = <0>;
+            clock-output-names = "bd71815-32k-out";
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            rohm,charger-sense-resistor-ohms = <10000000>;
+
+            regulators {
+                buck1: buck1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <1150000>;
+                    rohm,dvs-suspend-voltage = <950000>;
+                };
+                buck2: buck2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <1150000>;
+                    rohm,dvs-suspend-voltage = <950000>;
+                };
+                buck3: buck3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <2700000>;
+                    regulator-always-on;
+                };
+                buck4: buck4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1850000>;
+                    regulator-always-on;
+                };
+                buck5: buck5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo1: ldo1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo2: ldo2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo3: ldo3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo4: ldo4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo5: ldo5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo6: ldodvref {
+                    regulator-name = "ldodvref";
+                    regulator-always-on;
+                };
+                ldo7: ldolpsr {
+                    regulator-name = "ldolpsr";
+                    regulator-always-on;
+                };
+
+                boost: wled {
+                    regulator-name = "wled";
+                    regulator-min-microamp = <10>;
+                    regulator-max-microamp = <25000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
index 4fbb9e734284..8380166d176c 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -41,6 +41,15 @@ properties:
   "#clock-cells":
     const: 0
 
+  clock-output-names:
+    const: bd71828-32k-out
+
+  rohm,clkout-open-drain:
+    description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 1
+
   rohm,charger-sense-resistor-ohms:
     minimum: 10000000
     maximum: 50000000
@@ -74,6 +83,8 @@ required:
   - gpio-controller
   - "#gpio-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
deleted file mode 100644
index f22d74c7a8db..000000000000
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-* ROHM BD71837 and BD71847 Power Management Integrated Circuit bindings
-
-BD71837MWV and BD71847MWV are programmable Power Management ICs for powering
-single-core, dual-core, and quad-core SoCs such as NXP-i.MX 8M. They are
-optimized for low BOM cost and compact solution footprint. BD71837MWV
-integrates 8 Buck regulators and 7 LDOs. BD71847MWV contains 6 Buck regulators
-and 6 LDOs.
-
-Datasheet for BD71837 is available at:
-https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
-Datasheet for BD71847 is available at:
-https://www.rohm.com/datasheet/BD71847AMWV/bd71847amwv-e
-
-Required properties:
- - compatible		: Should be "rohm,bd71837" for bd71837
-				    "rohm,bd71847" for bd71847.
- - reg			: I2C slave address.
- - interrupt-parent	: Phandle to the parent interrupt controller.
- - interrupts		: The interrupt line the device is connected to.
- - clocks		: The parent clock connected to PMIC. If this is missing
-			  32768 KHz clock is assumed.
- - #clock-cells		: Should be 0.
- - regulators:		: List of child nodes that specify the regulators.
-			  Please see ../regulator/rohm,bd71837-regulator.txt
-
-Optional properties:
-- clock-output-names	: Should contain name for output clock.
-- rohm,reset-snvs-powered : Transfer BD718x7 to SNVS state at reset.
-
-The BD718x7 supports two different HW states as reset target states. States
-are called as SNVS and READY. At READY state all the PMIC power outputs go
-down and OTP is reload. At the SNVS state all other logic and external
-devices apart from the SNVS power domain are shut off. Please refer to NXP
-i.MX8 documentation for further information regarding SNVS state. When a
-reset is done via SNVS state the PMIC OTP data is not reload. This causes
-power outputs that have been under SW control to stay down when reset has
-switched power state to SNVS. If reset is done via READY state the power
-outputs will be returned to HW control by OTP loading. Thus the reset
-target state is set to READY by default. If SNVS state is used the boot
-crucial regulators must have the regulator-always-on and regulator-boot-on
-properties set in regulator node.
-
-- rohm,short-press-ms	: Short press duration in milliseconds
-- rohm,long-press-ms	: Long press duration in milliseconds
-
-Configure the "short press" and "long press" timers for the power button.
-Values are rounded to what hardware supports (500ms multiple for short and
-1000ms multiple for long). If these properties are not present the existing
-configuration (from bootloader or OTP) is not touched.
-
-Example:
-
-	/* external oscillator node */
-	osc: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <1>;
-		clock-frequency  = <32768>;
-		clock-output-names = "osc";
-	};
-
-	pmic: pmic@4b {
-		compatible = "rohm,bd71837";
-		reg = <0x4b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <29 GPIO_ACTIVE_LOW>;
-		interrupt-names = "irq";
-		#clock-cells = <0>;
-		clocks = <&osc 0>;
-		clock-output-names = "bd71837-32k-out";
-		rohm,reset-snvs-powered;
-
-		regulators {
-			buck1: BUCK1 {
-				regulator-name = "buck1";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <1250>;
-			};
-			// [...]
-		};
-	};
-
-	/* Clock consumer node */
-	rtc@0 {
-		compatible = "company,my-rtc";
-		clock-names = "my-clock";
-		clocks = <&pmic>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
new file mode 100644
index 000000000000..3bfdd33702ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
@@ -0,0 +1,244 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71837-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71837 Power Management Integrated Circuit bindings
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  BD71837MWV is programmable Power Management ICs for powering single-core,
+  dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is optimized for low
+  BOM cost and compact solution footprint. BD71837MWV  integrates 8 Buck
+  regulators and 7 LDOs.
+  Datasheet for BD71837 is available at
+  https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71837amwv-product
+
+properties:
+  compatible:
+    const: rohm,bd71837
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: osc
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    const: pmic_clk
+
+# The BD718x7 supports two different HW states as reset target states. States
+# are called as SNVS and READY. At READY state all the PMIC power outputs go
+# down and OTP is reload. At the SNVS state all other logic and external
+# devices apart from the SNVS power domain are shut off. Please refer to NXP
+# i.MX8 documentation for further information regarding SNVS state. When a
+# reset is done via SNVS state the PMIC OTP data is not reload. This causes
+# power outputs that have been under SW control to stay down when reset has
+# switched power state to SNVS. If reset is done via READY state the power
+# outputs will be returned to HW control by OTP loading. Thus the reset
+# target state is set to READY by default. If SNVS state is used the boot
+# crucial regulators must have the regulator-always-on and regulator-boot-on
+# properties set in regulator node.
+
+  rohm,reset-snvs-powered:
+    description: |
+      Transfer PMIC to SNVS state at reset
+    type: boolean
+
+# Configure the "short press" and "long press" timers for the power button.
+# Values are rounded to what hardware supports
+# Short-press:
+#   Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s
+# Long-press:
+#   Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s
+# If these properties are not present the existing configuration (from
+# bootloader or OTP) is not touched.
+
+  rohm,short-press-ms:
+    description:
+      Short press duration in milliseconds
+    enum:
+      - 10
+      - 500
+      - 1000
+      - 1500
+      - 2000
+      - 2500
+      - 3000
+      - 3500
+      - 4000
+      - 4500
+      - 5000
+      - 5500
+      - 6000
+      - 6500
+      - 7000
+
+  rohm,long-press-ms:
+    description:
+      Long press duration in milliseconds
+    enum:
+      - 10
+      - 1000
+      - 2000
+      - 3000
+      - 4000
+      - 5000
+      - 6000
+      - 7000
+      - 8000
+      - 9000
+      - 10000
+      - 11000
+      - 12000
+      - 13000
+      - 14000
+
+  regulators:
+    $ref: ../regulator/rohm,bd71837-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#clock-cells"
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd71837";
+            reg = <0x4b>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            #clock-cells = <0>;
+            clocks = <&osc 0>;
+            rohm,reset-snvs-powered;
+            rohm,short-press-ms = <10>;
+            rohm,long-press-ms = <2000>;
+
+            regulators {
+                buck1: BUCK1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <900000>;
+                    rohm,dvs-idle-voltage = <850000>;
+                    rohm,dvs-suspend-voltage = <800000>;
+                };
+                buck2: BUCK2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <1000000>;
+                    rohm,dvs-idle-voltage = <900000>;
+                };
+                buck3: BUCK3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    rohm,dvs-run-voltage = <1000000>;
+                };
+                buck4: BUCK4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    rohm,dvs-run-voltage = <1000000>;
+                };
+                buck5: BUCK5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-boot-on;
+                };
+                buck6: BUCK6 {
+                    regulator-name = "buck6";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                buck7: BUCK7 {
+                    regulator-name = "buck7";
+                    regulator-min-microvolt = <1605000>;
+                    regulator-max-microvolt = <1995000>;
+                    regulator-boot-on;
+                };
+                buck8: BUCK8 {
+                    regulator-name = "buck8";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                };
+
+                ldo1: LDO1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                ldo2: LDO2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <900000>;
+                    regulator-boot-on;
+                };
+                ldo3: LDO3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo4: LDO4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                ldo5: LDO5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo6: LDO6 {
+                    regulator-name = "ldo6";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                ldo7_reg: LDO7 {
+                    regulator-name = "ldo7";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
new file mode 100644
index 000000000000..5d531051a153
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
@@ -0,0 +1,229 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71847-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71847 and BD71850 Power Management Integrated Circuit bindings
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  BD71847AMWV and BD71850MWV are programmable Power Management ICs for powering
+  single-core,  dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is
+  optimized for low BOM cost and compact solution footprint. BD71847MWV and
+  BD71850MWV integrate 6 Buck regulators and 6 LDOs.
+  Datasheets are available at
+  https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71847amwv-product
+  https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71850mwv-product
+
+properties:
+  compatible:
+    enum:
+      - rohm,bd71847
+      - rohm,bd71850
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+# The BD71847 abd BD71850 support two different HW states as reset target
+# states. States are called as SNVS and READY. At READY state all the PMIC
+# power outputs go down and OTP is reload. At the SNVS state all other logic
+# and external devices apart from the SNVS power domain are shut off. Please
+# refer to NXP i.MX8 documentation for further information regarding SNVS
+# state. When a reset is done via SNVS state the PMIC OTP data is not reload.
+# This causes power outputs that have been under SW control to stay down when
+# reset has switched power state to SNVS. If reset is done via READY state the
+# power outputs will be returned to HW control by OTP loading. Thus the reset
+# target state is set to READY by default. If SNVS state is used the boot
+# crucial regulators must have the regulator-always-on and regulator-boot-on
+# properties set in regulator node.
+
+  rohm,reset-snvs-powered:
+    description:
+      Transfer PMIC to SNVS state at reset.
+    type: boolean
+
+# Configure the "short press" and "long press" timers for the power button.
+# Values are rounded to what hardware supports
+# Short-press:
+#   Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s
+# Long-press:
+#   Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s
+# If these properties are not present the existing # configuration (from
+# bootloader or OTP) is not touched.
+
+  rohm,short-press-ms:
+    description:
+      Short press duration in milliseconds
+    enum:
+      - 10
+      - 500
+      - 1000
+      - 1500
+      - 2000
+      - 2500
+      - 3000
+      - 3500
+      - 4000
+      - 4500
+      - 5000
+      - 5500
+      - 6000
+      - 6500
+      - 7000
+      - 7500
+
+  rohm,long-press-ms:
+    description:
+      Long press duration in milliseconds
+    enum:
+      - 10
+      - 1000
+      - 2000
+      - 3000
+      - 4000
+      - 5000
+      - 6000
+      - 7000
+      - 8000
+      - 9000
+      - 10000
+      - 11000
+      - 12000
+      - 13000
+      - 14000
+      - 15000
+
+  regulators:
+    $ref: ../regulator/rohm,bd71847-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - regulators
+
+additionalProperties: false
+
+dependencies:
+  '#clock-cells': [clocks]
+  clocks: ['#clock-cells']
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd71847";
+            reg = <0x4b>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            #clock-cells = <0>;
+            clocks = <&osc 0>;
+            rohm,reset-snvs-powered;
+            rohm,short-press-ms = <10>;
+            rohm,long-press-ms = <2000>;
+
+            regulators {
+                buck1: BUCK1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <900000>;
+                    rohm,dvs-idle-voltage = <850000>;
+                    rohm,dvs-suspend-voltage = <800000>;
+                };
+                buck2: BUCK2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <1000000>;
+                    rohm,dvs-idle-voltage = <900000>;
+                };
+                buck3: BUCK3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <550000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-boot-on;
+                };
+                buck4: BUCK4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <2600000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                buck5: BUCK5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <1605000>;
+                    regulator-max-microvolt = <1995000>;
+                    regulator-boot-on;
+                };
+                buck8: BUCK6 {
+                    regulator-name = "buck6";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                };
+
+                ldo1: LDO1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <1600000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                ldo2: LDO2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <900000>;
+                    regulator-boot-on;
+                };
+                ldo3: LDO3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo4: LDO4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                ldo5: LDO5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo6: LDO6 {
+                    regulator-name = "ldo6";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml
new file mode 100644
index 000000000000..89f9efee465b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd9571mwv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Marek Vasut <marek.vasut@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - rohm,bd9571mwv
+      - rohm,bd9574mwf
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  rohm,ddr-backup-power:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0xf
+    description: |
+      Value to use for DDR-Backup Power (default 0).
+      This is a bitmask that specifies which DDR power rails need to be kept
+      powered when backup mode is entered, for system suspend:
+        - bit 0: DDR0
+        - bit 1: DDR1
+        - bit 2: DDR0C
+        - bit 3: DDR1C
+      These bits match the KEEPON_DDR* bits in the documentation for the "BKUP
+      Mode Cnt" register.
+
+  rohm,rstbmode-level:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The RSTB signal is configured for level mode, to accommodate a toggle
+      power switch (the RSTBMODE pin is strapped low).
+
+  rohm,rstbmode-pulse:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The RSTB signal is configured for pulse mode, to accommodate a momentary
+      power switch (the RSTBMODE pin is strapped high).
+
+  regulators:
+    type: object
+    description:
+      List of child nodes that specify the regulator initialization data.
+      Child nodes must be named after their hardware counterparts.
+
+    patternProperties:
+      "^(vd09|vd18|vd25|vd33|dvfs)$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+        properties:
+          regulator-name:
+            pattern: "^(vd09|vd18|vd25|vd33|dvfs)$"
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+oneOf:
+  - required:
+      - rohm,rstbmode-level
+  - required:
+      - rohm,rstbmode-pulse
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pmic: pmic@30 {
+                  compatible = "rohm,bd9571mwv";
+                  reg = <0x30>;
+                  interrupt-parent = <&gpio2>;
+                  interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+                  interrupt-controller;
+                  #interrupt-cells = <2>;
+                  gpio-controller;
+                  #gpio-cells = <2>;
+                  rohm,ddr-backup-power = <0xf>;
+                  rohm,rstbmode-pulse;
+
+                  regulators {
+                          dvfs: dvfs {
+                                  regulator-name = "dvfs";
+                                  regulator-min-microvolt = <750000>;
+                                  regulator-max-microvolt = <1030000>;
+                                  regulator-boot-on;
+                                  regulator-always-on;
+                          };
+                  };
+          };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
new file mode 100644
index 000000000000..6483860da955
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd9576-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit bindings
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  BD9576MUF and BD9573MUF are power management ICs primarily intended for
+  powering the R-Car series processors.
+  The IC provides 6 power outputs with configurable sequencing and safety
+  monitoring. A watchdog logic with slow ping/windowed modes is also included.
+
+properties:
+  compatible:
+    enum:
+      - rohm,bd9576
+      - rohm,bd9573
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  rohm,vout1-en-low:
+    description:
+      BD9576 and BD9573 VOUT1 regulator enable state can be individually
+      controlled by a GPIO. This is dictated by state of vout1-en pin during
+      the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1
+      enable sate is controlled via this pin. Set this property if vout1-en
+      is wired to be down at PMIC start-up.
+    type: boolean
+
+  rohm,vout1-en-gpios:
+    description:
+      GPIO specifier to specify the GPIO connected to vout1-en for vout1 ON/OFF
+      state control.
+    maxItems: 1
+
+  rohm,ddr-sel-low:
+    description:
+      The BD9576 and BD9573 output voltage for DDR can be selected by setting
+      the ddr-sel pin low or high. Set this property if ddr-sel is grounded.
+    type: boolean
+
+  rohm,watchdog-enable-gpios:
+    description: The GPIO line used to enable the watchdog.
+    maxItems: 1
+
+  rohm,watchdog-ping-gpios:
+    description: The GPIO line used to ping the watchdog.
+    maxItems: 1
+
+  rohm,hw-timeout-ms:
+    maxItems: 2
+    description:
+      Watchog timeout in milliseconds. If single value is given it is
+      the maximum timeout. Eg. if pinging watchdog is not done within this time
+      limit the watchdog will be triggered. If two values are given watchdog
+      is configured in "window mode". Then first value is limit for short-ping
+      Eg. if watchdog is pinged sooner than that the watchdog will trigger.
+      When two values is given the second value is the maximum timeout.
+      # (HW) minimum for short timeout is 2ms, maximum 220 ms.
+      # (HW) minimum for max timeout is 4ms, maximum 4416 ms.
+
+  regulators:
+    $ref: ../regulator/rohm,bd9576-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@30 {
+            compatible = "rohm,bd9576";
+            reg = <0x30>;
+            rohm,vout1-en-low;
+            rohm,vout1-en-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+            rohm,ddr-sel-low;
+            rohm,watchdog-enable-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+            rohm,watchdog-ping-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+            rohm,hw-timeout-ms = <150>, <2300>;
+
+            regulators {
+                boost1: regulator-vd50 {
+                    regulator-name = "VD50";
+                };
+                buck1: regulator-vd18 {
+                    regulator-name = "VD18";
+                };
+                buck2: regulator-vdddr {
+                    regulator-name = "VDDDR";
+                };
+                buck3: regulator-vd10 {
+                    regulator-name = "VD10";
+                };
+                ldo: regulator-voutl1 {
+                    regulator-name = "VOUTL1";
+                };
+                sw: regulator-vouts1 {
+                    regulator-name = "VOUTS1";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
deleted file mode 100644
index 30ea27c3936d..000000000000
--- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Samsung Exynos SoC Low Power Audio Subsystem (LPASS)
-
-Required properties:
-
- - compatible		: "samsung,exynos5433-lpass"
- - reg			: should contain the LPASS top SFR region location
-			  and size
- - clock-names		: should contain following required clocks: "sfr0_ctrl"
- - clocks		: should contain clock specifiers of all clocks, which
-			  input names have been specified in clock-names
-			  property, in same order.
- - #address-cells	: should be 1
- - #size-cells		: should be 1
- - ranges		: must be present
-
-Each IP block of the Low Power Audio Subsystem should be specified as
-an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes:
-UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices.
-
-Bindings of the sub-nodes are described in:
-  ../serial/samsung_uart.yaml
-  ../sound/samsung-i2s.txt
-  ../dma/arm-pl330.txt
-
-
-Example:
-
-audio-subsystem {
-	compatible = "samsung,exynos5433-lpass";
-	reg = <0x11400000 0x100>, <0x11500000 0x08>;
-	clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
-	clock-names = "sfr0_ctrl";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	adma: adma@11420000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x11420000 0x1000>;
-		interrupts = <0 73 0>;
-		clocks = <&cmu_aud CLK_ACLK_DMAC>;
-		clock-names = "apb_pclk";
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-	};
-
-	i2s0: i2s0@11440000 {
-		compatible = "samsung,exynos7-i2s";
-		reg = <0x11440000 0x100>;
-		dmas = <&adma 0 &adma 2>;
-		dma-names = "tx", "rx";
-		interrupts = <0 70 0>;
-		clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
-			 <&cmu_aud CLK_SCLK_AUD_I2S>,
-			 <&cmu_aud CLK_SCLK_I2S_BCLK>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-	};
-
-	serial_3: serial@11460000 {
-		compatible = "samsung,exynos5433-uart";
-		reg = <0x11460000 0x100>;
-		interrupts = <0 67 0>;
-		clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
-			 <&cmu_aud CLK_SCLK_AUD_UART>;
-		clock-names = "uart", "clk_uart_baud0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart_aud_bus>;
-	};
- };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml
new file mode 100644
index 000000000000..b97b06848729
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,exynos5433-lpass.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Low Power Audio Subsystem (LPASS)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,exynos5433-lpass
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sfr0_ctrl
+
+  power-domains:
+    maxItems: 1
+
+  ranges: true
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^dma-controller@[0-9a-f]+$":
+    $ref: /schemas/dma/arm,pl330.yaml
+
+  "^i2s@[0-9a-f]+$":
+    $ref: /schemas/sound/samsung-i2s.yaml
+
+  "^serial@[0-9a-f]+$":
+    $ref: /schemas/serial/samsung_uart.yaml
+
+required:
+  - compatible
+  - '#address-cells'
+  - clocks
+  - clock-names
+  - ranges
+  - reg
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    audio-subsystem@11400000 {
+        compatible = "samsung,exynos5433-lpass";
+        reg = <0x11400000 0x100>, <0x11500000 0x08>;
+        clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
+        clock-names = "sfr0_ctrl";
+        power-domains = <&pd_aud>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        dma-controller@11420000 {
+            compatible = "arm,pl330", "arm,primecell";
+            reg = <0x11420000 0x1000>;
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_aud CLK_ACLK_DMAC>;
+            clock-names = "apb_pclk";
+            #dma-cells = <1>;
+            dma-channels = <8>;
+            dma-requests = <32>;
+            power-domains = <&pd_aud>;
+        };
+
+        i2s@11440000 {
+            compatible = "samsung,exynos7-i2s";
+            reg = <0x11440000 0x100>;
+            dmas = <&adma 0>, <&adma 2>;
+            dma-names = "tx", "rx";
+            interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
+                     <&cmu_aud CLK_SCLK_AUD_I2S>,
+                     <&cmu_aud CLK_SCLK_I2S_BCLK>;
+            clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+            #clock-cells = <1>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&i2s0_bus>;
+            power-domains = <&pd_aud>;
+            #sound-dai-cells = <1>;
+        };
+
+        serial@11460000 {
+            compatible = "samsung,exynos5433-uart";
+            reg = <0x11460000 0x100>;
+            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
+                     <&cmu_aud CLK_SCLK_AUD_UART>;
+            clock-names = "uart", "clk_uart_baud0";
+            pinctrl-names = "default";
+            pinctrl-0 = <&uart_aud_bus>;
+            power-domains = <&pd_aud>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
new file mode 100644
index 000000000000..055dfc337c2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mpa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPA01 Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The Samsung S2MPA01 is a Power Management IC which includes voltage
+  and current regulators, RTC, clock outputs and other sub-blocks.
+
+properties:
+  compatible:
+    const: samsung,s2mpa01-pmic
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    $ref: ../regulator/samsung,s2mpa01.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s2mpa01-pmic";
+            reg = <0x66>;
+
+            regulators {
+                ldo1_reg: LDO1 {
+                    regulator-name = "VDD_ALIVE";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                };
+
+                ldo2_reg: LDO2 {
+                    regulator-name = "VDDQ_MMC2";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+                    regulator-always-on;
+                };
+
+                // ...
+
+                buck1_reg: BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+
+                buck2_reg: BUCK2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-ramp-delay = <50000>;
+                };
+
+                // ...
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
new file mode 100644
index 000000000000..5ff6546c72b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The Samsung S2MPS11/13/14/15 and S2MPU02 is a family of Power Management IC
+  which include voltage and current regulators, RTC, clock outputs and other
+  sub-blocks.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s2mps11-pmic
+      - samsung,s2mps13-pmic
+      - samsung,s2mps14-pmic
+      - samsung,s2mps15-pmic
+      - samsung,s2mpu02-pmic
+
+  clocks:
+    $ref: ../clock/samsung,s2mps11.yaml
+    description:
+      Child node describing clock provider.
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      List of child nodes that specify the regulators.
+
+  samsung,s2mps11-acokb-ground:
+    description: |
+      Indicates that ACOKB pin of S2MPS11 PMIC is connected to the ground so
+      the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the
+      power. Usually the ACOKB is pulled up to VBATT so when PWRHOLD pin goes
+      low, the rising ACOKB will trigger power off.
+    type: boolean
+
+  samsung,s2mps11-wrstbi-ground:
+    description: |
+      Indicates that WRSTBI pin of PMIC is pulled down. When the system is
+      suspended it will always go down thus triggerring unwanted buck warm
+      reset (setting buck voltages to default values).
+    type: boolean
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps11-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps11.yaml
+        samsung,s2mps11-wrstbi-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps13-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps13.yaml
+        samsung,s2mps11-acokb-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps14-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps14.yaml
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps15-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps15.yaml
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mpu02-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mpu02.yaml
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s2mps11-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&s2mps11_irq>;
+            samsung,s2mps11-acokb-ground;
+            wakeup-source;
+
+            clocks {
+                compatible = "samsung,s2mps11-clk";
+                #clock-cells = <1>;
+                clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "vdd_ldo1";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                };
+
+                LDO4 {
+                    regulator-name = "vdd_adc";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ....
+
+                BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-coupled-with = <&buck3_reg>;
+                    regulator-coupled-max-spread = <300000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK3 {
+                    regulator-name = "vdd_int";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-coupled-with = <&buck2_reg>;
+                    regulator-coupled-max-spread = <300000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ...
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s2mps14-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            wakeup-source;
+
+            clocks {
+                compatible = "samsung,s2mps14-clk";
+                #clock-cells = <1>;
+                clock-output-names = "s2mps14_ap", "unused", "s2mps14_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VLDO1_1.0V";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VBUCK1_1.0V";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ...
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
new file mode 100644
index 000000000000..10c7b408f33a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
@@ -0,0 +1,307 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5M8767 Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The Samsung S5M8767 is a Power Management IC which includes voltage
+  and current regulators, RTC, clock outputs and other sub-blocks.
+
+properties:
+  compatible:
+    const: samsung,s5m8767-pmic
+
+  clocks:
+    $ref: ../clock/samsung,s2mps11.yaml
+    description:
+      Child node describing clock provider.
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    $ref: ../regulator/samsung,s5m8767.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  s5m8767,pmic-buck2-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 8
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck2 when
+      changing voltage using gpio dvs.
+
+  s5m8767,pmic-buck3-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 8
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck3 when
+      changing voltage using gpio dvs.
+
+  s5m8767,pmic-buck4-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 8
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck4 when
+      changing voltage using gpio dvs.
+
+  s5m8767,pmic-buck-ds-gpios:
+    minItems: 3
+    maxItems: 3
+    description: |
+      GPIO specifiers for three host gpio's used for selecting GPIO DVS lines.
+      It is one-to-one mapped to dvs gpio lines.
+
+  s5m8767,pmic-buck2-uses-gpio-dvs:
+    type: boolean
+    description: buck2 can be controlled by gpio dvs.
+
+  s5m8767,pmic-buck3-uses-gpio-dvs:
+    type: boolean
+    description: buck3 can be controlled by gpio dvs.
+
+  s5m8767,pmic-buck4-uses-gpio-dvs:
+    type: boolean
+    description: buck4 can be controlled by gpio dvs.
+
+  s5m8767,pmic-buck-default-dvs-idx:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minimum: 0
+    maximum: 7
+    default: 0
+    description: |
+      Default voltage setting selected from the possible 8 options selectable
+      by the dvs gpios. The value of this property should be between 0 and 7.
+      If not specified or if out of range, the default value of this property
+      is set to 0.
+
+  s5m8767,pmic-buck-dvs-gpios:
+    minItems: 3
+    maxItems: 3
+    description: |
+      GPIO specifiers for three host gpio's used for dvs.
+
+  vinb1-supply:
+    description: Power supply for buck1
+  vinb2-supply:
+    description: Power supply for buck2
+  vinb3-supply:
+    description: Power supply for buck3
+  vinb4-supply:
+    description: Power supply for buck4
+  vinb5-supply:
+    description: Power supply for buck5
+  vinb6-supply:
+    description: Power supply for buck6
+  vinb7-supply:
+    description: Power supply for buck7
+  vinb8-supply:
+    description: Power supply for buck8
+  vinb9-supply:
+    description: Power supply for buck9
+
+  vinl1-supply:
+    description: Power supply for LDO3, LDO10, LDO26, LDO27
+  vinl2-supply:
+    description: Power supply for LDO13, LDO16, LDO25, LDO28
+  vinl3-supply:
+    description: Power supply for LDO11, LDO14
+  vinl4-supply:
+    description: Power supply for LDO4, LDO9
+  vinl5-supply:
+    description: Power supply for LDO12, LDO17, LDO19, LDO23
+  vinl6-supply:
+    description: Power supply for LDO18, LDO20, LDO21, LDO24
+  vinl7-supply:
+    description: Power supply for LDO5, LDO22
+  vinl8-supply:
+    description: Power supply for LDO1, LDO6, LDO7, LDO8, LDO15
+  vinl9-supply:
+    description: Power supply for LDO2
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - regulators
+  - s5m8767,pmic-buck-ds-gpios
+
+dependencies:
+  s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+  s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+  s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+  s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ]
+  s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ]
+  s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ]
+
+additionalProperties: false
+
+allOf:
+  - if:
+      required:
+        - s5m8767,pmic-buck2-uses-gpio-dvs
+    then:
+      properties:
+        s5m8767,pmic-buck3-uses-gpio-dvs: false
+        s5m8767,pmic-buck4-uses-gpio-dvs: false
+
+  - if:
+      required:
+        - s5m8767,pmic-buck3-uses-gpio-dvs
+    then:
+      properties:
+        s5m8767,pmic-buck2-uses-gpio-dvs: false
+        s5m8767,pmic-buck4-uses-gpio-dvs: false
+
+  - if:
+      required:
+        - s5m8767,pmic-buck4-uses-gpio-dvs
+    then:
+      properties:
+        s5m8767,pmic-buck2-uses-gpio-dvs: false
+        s5m8767,pmic-buck3-uses-gpio-dvs: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s5m8767-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx3>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+            wakeup-source;
+
+            s5m8767,pmic-buck-default-dvs-idx = <3>;
+            s5m8767,pmic-buck2-uses-gpio-dvs;
+
+            s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>,
+                                          <&gpd1 1 GPIO_ACTIVE_LOW>,
+                                          <&gpd1 2 GPIO_ACTIVE_LOW>;
+
+            s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 4 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 5 GPIO_ACTIVE_LOW>;
+
+            s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+                                             <1250000>, <1200000>,
+                                             <1150000>, <1100000>,
+                                             <1000000>, <950000>;
+
+            s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+                                             <1100000>, <1100000>,
+                                             <1000000>, <1000000>,
+                                             <1000000>, <1000000>;
+
+            s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+                                             <1200000>, <1200000>,
+                                             <1200000>, <1200000>,
+                                             <1200000>, <1200000>;
+
+            clocks {
+                compatible = "samsung,s5m8767-clk";
+                #clock-cells = <1>;
+                clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VDD_ALIVE";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VDD_MIF";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                BUCK2 {
+                    regulator-name = "VDD_ARM";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                // ...
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s5m8767-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx3>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+            wakeup-source;
+
+            s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 4 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 5 GPIO_ACTIVE_LOW>;
+
+            clocks {
+                compatible = "samsung,s5m8767-clk";
+                #clock-cells = <1>;
+                clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VDD_ALIVE";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                // ...
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
deleted file mode 100644
index c68cdd365153..000000000000
--- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-Binding for Samsung S2M and S5M family multi-function device
-============================================================
-
-This is a part of device tree bindings for S2M and S5M family multi-function
-devices.
-
-The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family
-of multi-function devices which include voltage and current regulators, RTC,
-charger controller, clock outputs and other sub-blocks. It is interfaced
-to the host controller using an I2C interface. Each sub-block is usually
-addressed by the host system using different I2C slave addresses.
-
-
-This document describes bindings for main device node. Optional sub-blocks
-must be a sub-nodes to it. Bindings for them can be found in:
- - bindings/regulator/samsung,s2mpa01.txt
- - bindings/regulator/samsung,s2mps11.txt
- - bindings/regulator/samsung,s5m8767.txt
- - bindings/clock/samsung,s2mps11.txt
-
-
-Required properties:
- - compatible: Should be one of the following
-	- "samsung,s2mpa01-pmic",
-	- "samsung,s2mps11-pmic",
-	- "samsung,s2mps13-pmic",
-	- "samsung,s2mps14-pmic",
-	- "samsung,s2mps15-pmic",
-	- "samsung,s2mpu02-pmic",
-	- "samsung,s5m8767-pmic".
- - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
-
-Optional properties:
- - interrupts: Interrupt specifiers for interrupt sources.
- - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
-   down. When the system is suspended it will always go down thus triggerring
-   unwanted buck warm reset (setting buck voltages to default values).
- - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
-   connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
-   register to turn off the power. Usually the ACOKB is pulled up to VBATT so
-   when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
-
-Example:
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-
-		s2m_osc: clocks {
-			compatible = "samsung,s2mps11-clk";
-			#clock-cells = <1>;
-			clock-output-names = "xx", "yy", "zz";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ABB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_ALIVE_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <50000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
new file mode 100644
index 000000000000..ee0be32ac020
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/silergy,sy7636a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy7636a PMIC
+
+maintainers:
+  - Alistair Francis <alistair@alistair23.me>
+
+properties:
+  compatible:
+    const: silergy,sy7636a
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  epd-pwr-good-gpios:
+    description:
+      Specifying the power good GPIOs.
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    properties:
+      compatible:
+        const: silergy,sy7636a-regulator
+
+      vcom:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+        description:
+          The regulator for the compenstation voltage. Enabling/disabling this
+          enables/disables the entire device.
+        properties:
+          regulator-name:
+            const: vcom
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@62 {
+        compatible = "silergy,sy7636a";
+        reg = <0x62>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_epdpmic>;
+        #thermal-sensor-cells = <0>;
+
+        regulators {
+          reg_epdpmic: vcom {
+            regulator-name = "vcom";
+            regulator-boot-on;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml
new file mode 100644
index 000000000000..996bd4a17ca3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/sprd,ums512-glbreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc System Global Register
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description:
+  Unisoc system global registers provide register map
+  for clocks and some multimedia modules of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: sprd,ums512-glbregs
+      - const: syscon
+      - const: simple-mfd
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^clock-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/clock/sprd,ums512-clk.yaml#
+    description:
+      Clock controller for the SoC clocks.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_apb_regs: syscon@71000000 {
+      compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd";
+      reg = <0x71000000 0x3000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0 0x71000000 0x3000>;
+
+      clock-controller@0 {
+        compatible = "sprd,ums512-apahb-gate";
+        reg = <0x0 0x2000>;
+        #clock-cells = <1>;
+      };
+    };
+
+  - |
+    ap_intc5_regs: syscon@32360000 {
+      compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd";
+      reg = <0x32360000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
index 1a4cc5f3fb33..d950dd5d48bd 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
@@ -17,7 +17,7 @@ description: |
      - simple counter from IN1 input signal.
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 properties:
   compatible:
@@ -33,14 +33,20 @@ properties:
     items:
       - const: mux
 
+  interrupts:
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
   "#size-cells":
     const: 0
 
+  wakeup-source: true
+
   pwm:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -53,33 +59,46 @@ properties:
       - "#pwm-cells"
       - compatible
 
-patternProperties:
-  "^trigger@[0-9]+$":
+  counter:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
-        const: st,stm32-lptimer-trigger
+        const: st,stm32-lptimer-counter
 
-      reg:
-        description: Identify trigger hardware block.
-        items:
-         minimum: 0
-         maximum: 2
+    required:
+      - compatible
+
+  timer:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: st,stm32-lptimer-timer
 
     required:
       - compatible
-      - reg
 
-  counter:
+patternProperties:
+  "^trigger@[0-9]+$":
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
-        const: st,stm32-lptimer-counter
+        const: st,stm32-lptimer-trigger
+
+      reg:
+        description: Identify trigger hardware block.
+        items:
+          minimum: 0
+          maximum: 2
 
     required:
       - compatible
+      - reg
 
 required:
   - "#address-cells"
@@ -94,11 +113,13 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     timer@40002400 {
       compatible = "st,stm32-lptimer";
       reg = <0x40002400 0x400>;
       clocks = <&timer_clk>;
       clock-names = "mux";
+      interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
       #address-cells = <1>;
       #size-cells = <0>;
 
@@ -115,6 +136,10 @@ examples:
       counter {
         compatible = "st,stm32-lptimer-counter";
       };
+
+      timer {
+        compatible = "st,stm32-lptimer-timer";
+      };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
index 590849ee9f32..e2c3c3b44abb 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
@@ -17,8 +17,7 @@ description: |
       programmable prescaler.
 
 maintainers:
-  - Benjamin Gaignard <benjamin.gaignard@st.com>
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 properties:
   compatible:
@@ -34,7 +33,7 @@ properties:
     items:
       - const: int
 
-  reset:
+  resets:
     maxItems: 1
 
   dmas:
@@ -47,6 +46,21 @@ properties:
     minItems: 1
     maxItems: 7
 
+  interrupts:
+    oneOf:
+      - maxItems: 1
+      - maxItems: 4
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: global
+      - items:
+          - const: brk
+          - const: up
+          - const: trg-com
+          - const: cc
+
   "#address-cells":
     const: 1
 
@@ -55,6 +69,7 @@ properties:
 
   pwm:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -67,31 +82,42 @@ properties:
         description:
           One or two <index level filter> to describe break input
           configurations.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-matrix
-          - items:
-              items:
-                - description: |
-                    "index" indicates on which break input (0 or 1) the
-                    configuration should be applied.
-                  enum: [ 0 , 1]
-                - description: |
-                    "level" gives the active level (0=low or 1=high) of the
-                    input signal for this configuration
-                  enum: [ 0, 1 ]
-                - description: |
-                    "filter" gives the filtering value (up to 15) to be applied.
-                  maximum: 15
-            minItems: 1
-            maxItems: 2
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "index" indicates on which break input (0 or 1) the
+                configuration should be applied.
+              enum: [0, 1]
+            - description: |
+                "level" gives the active level (0=low or 1=high) of the
+                input signal for this configuration
+              enum: [0, 1]
+            - description: |
+                "filter" gives the filtering value (up to 15) to be applied.
+              maximum: 15
+        minItems: 1
+        maxItems: 2
 
     required:
       - "#pwm-cells"
       - compatible
 
+  counter:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: st,stm32-timer-counter
+
+    required:
+      - compatible
+
 patternProperties:
   "^timer@[0-9]+$":
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -102,26 +128,14 @@ patternProperties:
       reg:
         description: Identify trigger hardware block.
         items:
-         minimum: 0
-         maximum: 16
+          minimum: 0
+          maximum: 16
 
     required:
       - compatible
       - reg
 
-  counter:
-    type: object
-
-    properties:
-      compatible:
-        const: st,stm32-timer-counter
-
-    required:
-      - compatible
-
 required:
-  - "#address-cells"
-  - "#size-cells"
   - compatible
   - reg
   - clocks
@@ -132,7 +146,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/stm32mp1-clks.h>
-    timers2: timers@40000000 {
+    timers2: timer@40000000 {
       #address-cells = <1>;
       #size-cells = <0>;
       compatible = "st,stm32-timers";
@@ -150,9 +164,9 @@ examples:
         #pwm-cells = <3>;
         st,breakinput = <0 1 5>;
       };
-      timer@0 {
+      timer@1 {
         compatible = "st,stm32-timer-trigger";
-        reg = <0>;
+        reg = <1>;
       };
       counter {
         compatible = "st,stm32-timer-counter";
diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
new file mode 100644
index 000000000000..b4d54302582f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/st,stmfx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics Multi-Function eXpander (STMFX) bindings
+
+description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
+               communication with the main MCU. Its main features are GPIO expansion,
+               main MCU IDD measurement (IDD is the amount of current that flows
+               through VDD) and resistive touchscreen controller.
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stmfx-0300
+
+  reg:
+    enum: [ 0x42, 0x43 ]
+
+  interrupts:
+    maxItems: 1
+
+  drive-open-drain: true
+
+  vdd-supply: true
+
+  pinctrl:
+    type: object
+
+    properties:
+      compatible:
+        const: st,stmfx-0300-pinctrl
+
+      "#gpio-cells":
+        const: 2
+
+      "#interrupt-cells":
+        const: 2
+
+      gpio-controller: true
+
+      interrupt-controller: true
+
+      gpio-ranges:
+        description: if all STMFX pins[24:0] are available (no other STMFX function in use),
+                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+                     if agpio[3:0] are not available (STMFX Touchscreen function in use),
+                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>;
+                     if agpio[7:4] are not available (STMFX IDD function in use),
+                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 20>;
+        maxItems: 1
+
+    patternProperties:
+      "^[a-zA-Z]*-pins$":
+        type: object
+        additionalProperties: false
+
+        allOf:
+          - $ref: ../pinctrl/pinmux-node.yaml
+
+        properties:
+          pins: true
+          bias-disable: true
+          bias-pull-up: true
+          bias-pull-pin-default: true
+          bias-pull-down: true
+          drive-open-drain: true
+          drive-push-pull: true
+          output-high: true
+          output-low: true
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - "#gpio-cells"
+      - "#interrupt-cells"
+      - gpio-controller
+      - interrupt-controller
+      - gpio-ranges
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      stmfx@42 {
+        compatible = "st,stmfx-0300";
+        reg = <0x42>;
+        interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+        interrupt-parent = <&gpioi>;
+        vdd-supply = <&v3v3>;
+
+        stmfx_pinctrl: pinctrl {
+          compatible = "st,stmfx-0300-pinctrl";
+          #gpio-cells = <2>;
+          #interrupt-cells = <2>;
+          gpio-controller;
+          interrupt-controller;
+          gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+          joystick_pins: joystick-pins {
+            pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+            drive-push-pull;
+            bias-pull-up;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt
deleted file mode 100644
index afd45c089585..000000000000
--- a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* STMicroelectronics STPMIC1 Power Management IC
-
-Required properties:
-- compatible:		: "st,stpmic1"
-- reg:			: The I2C slave address for the STPMIC1 chip.
-- interrupts:		: The interrupt line the device is connected to.
-- #interrupt-cells:	: Should be 1.
-- interrupt-controller:	: Marks the device node as an interrupt controller.
-			    Interrupt numbers are defined at
-			    dt-bindings/mfd/st,stpmic1.h.
-
-STPMIC1 consists in a varied group of sub-devices.
-Each sub-device binding is be described in own documentation file.
-
-Device			 Description
-------			------------
-st,stpmic1-onkey	: Power on key, see ../input/st,stpmic1-onkey.txt
-st,stpmic1-regulators	: Regulators, see ../regulator/st,stpmic1-regulator.txt
-st,stpmic1-wdt		: Watchdog, see ../watchdog/st,stpmic1-wdt.txt
-
-Example:
-
-#include <dt-bindings/mfd/st,stpmic1.h>
-
-pmic: pmic@33 {
-	compatible = "st,stpmic1";
-	reg = <0x33>;
-	interrupt-parent = <&gpioa>;
-	interrupts = <0 2>;
-
-	interrupt-controller;
-	#interrupt-cells = <2>;
-
-	onkey {
-		compatible = "st,stpmic1-onkey";
-		interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
-		interrupt-names = "onkey-falling", "onkey-rising";
-		power-off-time-sec = <10>;
-	};
-
-	watchdog {
-		compatible = "st,stpmic1-wdt";
-	};
-
-	regulators {
-		compatible = "st,stpmic1-regulators";
-
-		vdd_core: buck1 {
-			regulator-name = "vdd_core";
-			regulator-boot-on;
-			regulator-min-microvolt = <700000>;
-			regulator-max-microvolt = <1200000>;
-		};
-		vdd: buck3 {
-			regulator-name = "vdd";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-pull-down;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
new file mode 100644
index 000000000000..426658ad81d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
@@ -0,0 +1,334 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics STPMIC1 Power Management IC bindings
+
+description: STMicroelectronics STPMIC1 Power Management IC
+
+maintainers:
+  - pascal Paillet <p.paillet@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stpmic1
+
+  reg:
+    const: 0x33
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  onkey:
+    type: object
+
+    $ref: ../input/input.yaml
+
+    properties:
+      compatible:
+        const: st,stpmic1-onkey
+
+      interrupts:
+        items:
+          - description: onkey-falling, happens when onkey is pressed. IT_PONKEY_F of pmic
+          - description: onkey-rising, happens when onkey is released. IT_PONKEY_R of pmic
+
+      interrupt-names:
+        items:
+          - const: onkey-falling
+          - const: onkey-rising
+
+      st,onkey-clear-cc-flag:
+        description: onkey is able power on after an over-current shutdown event.
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      st,onkey-pu-inactive:
+        description: onkey pull up is not active
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      power-off-time-sec:
+        minimum: 1
+        maximum: 16
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+
+    additionalProperties: false
+
+  watchdog:
+    type: object
+
+    $ref: ../watchdog/watchdog.yaml
+
+    properties:
+      compatible:
+        const: st,stpmic1-wdt
+
+      timeout-sec: true
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  regulators:
+    type: object
+
+    description: |
+      Available Regulators in STPMIC1 device are:
+        - buck1 for Buck BUCK1
+        - buck2 for Buck BUCK2
+        - buck3 for Buck BUCK3
+        - buck4 for Buck BUCK4
+        - ldo1 for LDO LDO1
+        - ldo2 for LDO LDO2
+        - ldo3 for LDO LDO3
+        - ldo4 for LDO LDO4
+        - ldo5 for LDO LDO5
+        - ldo6 for LDO LDO6
+        - vref_ddr for LDO Vref DDR
+        - boost for Buck BOOST
+        - pwr_sw1 for VBUS_OTG switch
+        - pwr_sw2 for SW_OUT switch
+      Switches are fixed voltage regulators with only enable/disable capability.
+
+    properties:
+      compatible:
+        const: st,stpmic1-regulators
+
+      ldo3:
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-allow-bypass: true
+          regulator-over-current-protection: true
+
+        additionalProperties: false
+
+      ldo4:
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-over-current-protection: true
+
+        additionalProperties: false
+
+      vref_ddr:
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+
+        additionalProperties: false
+
+      boost:
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-over-current-protection: true
+
+        additionalProperties: false
+
+    patternProperties:
+      "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$":
+        description: STPMIC1 voltage regulators supplies
+
+      "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$":
+        $ref: ../regulator/regulator.yaml
+
+      "^ldo[1-2,5-6]$":
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-over-current-protection: true
+          regulator-enable-ramp-delay: true
+
+        additionalProperties: false
+
+      "^buck[1-4]$":
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-initial-mode: true
+          regulator-pull-down: true
+          regulator-over-current-protection: true
+          regulator-enable-ramp-delay: true
+
+        additionalProperties: false
+
+      "^pwr_sw[1-2]$":
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-over-current-protection: true
+          regulator-active-discharge: true
+
+        additionalProperties: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/mfd/st,stpmic1.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@33 {
+        compatible = "st,stpmic1";
+        reg = <0x33>;
+        interrupt-parent = <&gpioa>;
+        interrupts = <0 2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        onkey {
+          compatible = "st,stpmic1-onkey";
+          interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
+          interrupt-names = "onkey-falling", "onkey-rising";
+          power-off-time-sec = <10>;
+        };
+
+        watchdog {
+          compatible = "st,stpmic1-wdt";
+        };
+
+        regulators {
+          compatible = "st,stpmic1-regulators";
+
+          ldo6-supply = <&v3v3>;
+
+          buck1 {
+            regulator-name = "vdd_core";
+            interrupts = <IT_CURLIM_BUCK1 0>;
+            st,mask-reset;
+            regulator-boot-on;
+            regulator-min-microvolt = <700000>;
+            regulator-max-microvolt = <1200000>;
+          };
+
+          buck3 {
+            regulator-name = "vdd";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-boot-on;
+            regulator-pull-down;
+          };
+
+          buck4 {
+            regulator-name = "v3v3";
+            interrupts = <IT_CURLIM_BUCK4 0>;
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+          };
+
+          ldo6 {
+            regulator-name = "v1v8";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-over-current-protection;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
new file mode 100644
index 000000000000..6c8d42f27fe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
@@ -0,0 +1,522 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/stericsson,ab8500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson Analog Baseband AB8500 and AB8505
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  the AB8500 "Analog Baseband" is the mixed-signals integrated circuit
+  handling power management (regulators), analog-to-digital conversion
+  (ADC), battery charging, fuel gauging of the battery, battery-backed
+  RTC, PWM, USB PHY and some GPIO lines in the ST-Ericsson U8500 platforms
+  in connection with the DB8500 digital baseband. The DB8500 PRCMU
+  communicates directly and autonomously with the AB8500 and thus it
+  appears as a subnode of the DB8500 PRCMU. An altered version called
+  AB8505 also exist, the difference in AB8505 is that some of the USB and
+  USB charging handling has changed, and it has an embedded USB-to-serial
+  converter. Most subblocks takes their interrupts directly from the
+  AB8500 embedded interrupt controller.
+
+properties:
+  $nodename:
+    pattern: '^ab850[05]$'
+
+  compatible:
+    enum:
+      - stericsson,ab8500
+      - stericsson,ab8505
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  # Some subnodes use a reg, some don't. Those that do use a single cell.
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clock-controller:
+    description: Node describing the AB8500 clock controller. This
+      provides the reference clock for the entire U8500 system and
+      the DB8500 counterpart.
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-clk
+
+      '#clock-cells':
+        const: 1
+
+  gpio:
+    description: Node describing the AB8500 GPIO controller. A few
+      GPIO pins available for misc usage.
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - stericsson,ab8500-gpio
+          - stericsson,ab8505-gpio
+
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+  rtc:
+    description: Node describing the AB8500 battery-backed RTC.
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-rtc
+
+      interrupts:
+        items:
+          - description: 60 second interval alarm interrupt
+          - description: RTC alarm
+
+      interrupt-names:
+        items:
+          - const: 60S
+          - const: ALARM
+
+  adc:
+    description: Node describing the AB8500 general purpose analog to digital
+      converter, GPADC.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-gpadc
+
+      # AB8505 only supports one (software) EOC interrupt
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      interrupt-names: true
+
+      vddadc-supply: true
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      '#io-channel-cells':
+        const: 1
+
+    patternProperties:
+      "^channel@[0-9a-f]+$":
+        type: object
+        $ref: ../iio/adc/adc.yaml#
+        description: Represents each of the external channels which are
+          connected to the ADC.
+
+        properties:
+          reg:
+            items:
+              minimum: 1
+              maximum: 31
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - vddadc-supply
+      - '#address-cells'
+      - '#size-cells'
+      - '#io-channel-cells'
+
+    additionalProperties: false
+
+  thermal:
+    description: Node describing the AB8500 thermal control block. All this block
+      really does is to fire an interrupt when the die becomes 130 degrees Celsius
+      in temperature.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,abx500-temp
+
+      interrupts:
+        items:
+          - description: Thermal warm warning interrupt
+
+      interrupt-names:
+        items:
+          - const: ABX500_TEMP_WARM
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+
+    additionalProperties: false
+
+  ab8500_fg:
+    description: Node describing the AB8500 fuel gauge control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-fg.yaml
+
+  ab8500_btemp:
+    description: Node describing the AB8500 battery temperature control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-btemp.yaml
+
+  ab8500_charger:
+    description: Node describing the AB8500 battery charger control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-charger.yaml
+
+  ab8500_chargalg:
+    description: Node describing the AB8500 battery charger algorithm.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-chargalg.yaml
+
+  phy:
+    description: Node describing the AB8500 USB PHY control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-usb
+
+      interrupts:
+        items:
+          - description: ID wakeup rising IRQ
+          - description: ID wakeup falling IRQ
+          - description: VBUS detection falling IRQ
+          - description: VBUS detection rising IRQ
+          - description: USB link status change IRQ
+          - description: ADP probe plug IRQ
+          - description: ADP probe unplug IRQ
+
+      interrupt-names:
+        items:
+          - const: ID_WAKEUP_R
+          - const: ID_WAKEUP_F
+          - const: VBUS_DET_F
+          - const: VBUS_DET_R
+          - const: USB_LINK_STATUS
+          - const: USB_ADP_PROBE_PLUG
+          - const: USB_ADP_PROBE_UNPLUG
+
+      vddulpivio18-supply: true
+      v-ape-supply: true
+      musb_1v8-supply: true
+
+      clocks:
+        items:
+          - description: PRCMY system clock
+
+      clock-names:
+        items:
+          - const: sysclk
+
+      '#phy-cells':
+        const: 0
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - vddulpivio18-supply
+      - v-ape-supply
+      - musb_1v8-supply
+      - clocks
+      - clock-names
+      - '#phy-cells'
+
+    additionalProperties: false
+
+  key:
+    description: Node describing the AB8500 power-on key control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-poweron-key
+
+      interrupts:
+        items:
+          - description: ON key falling IRQ
+          - description: ON key rising IRQ
+
+      interrupt-names:
+        items:
+          - const: ONKEY_DBF
+          - const: ONKEY_DBR
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+
+    additionalProperties: false
+
+  ab8500-sysctrl:
+    description: Node describing the AB8500 system control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-sysctrl
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  codec:
+    description: Node describing the AB8500 audio codec block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-codec
+
+      V-AUD-supply: true
+      V-AMIC1-supply: true
+      V-AMIC2-supply: true
+      V-DMIC-supply: true
+
+      clocks:
+        items:
+          - description: Audio system clock
+
+      clock-names:
+        items:
+          - const: audioclk
+
+      stericsson,earpeice-cmv:
+        description: Earpeice voltage
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 950, 1100, 1270, 1580 ]
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  regulator:
+    description: Node describing the AB8500 internal regulators.
+    type: object
+
+    properties:
+      compatible:
+        enum:
+          - stericsson,ab8500-regulator
+          - stericsson,ab8505-regulator
+
+      vin-supply:
+        description: The regulator supplying all of the internal regulators
+          with power.
+
+      ab8500_ldo_aux1:
+        description: The voltage for the auxilary LDO regulator 1
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux2:
+        description: The voltage for the auxilary LDO regulator 2
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux3:
+        description: The voltage for the auxilary LDO regulator 3
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux4:
+        description: The voltage for the auxilary LDO regulator 4
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux5:
+        description: The voltage for the auxilary LDO regulator 5
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux6:
+        description: The voltage for the auxilary LDO regulator 6
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      # There is never any AUX7 regulator which is confusing
+
+      ab8500_ldo_aux8:
+        description: The voltage for the auxilary LDO regulator 8
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_intcore:
+        description: The LDO regulator for the internal core voltage
+          of the AB8500
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_adc:
+        description: Analog power regulator for the analog to digital converter
+          ADC, only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_tvout:
+        description: The voltage for the TV output regulator, incidentally
+          this voltage is also used for other purposes such as measuring
+          the temperature of the NTC thermistor on the battery.
+          Only present on AB8500.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_audio:
+        description: The LDO regulator for the audio codec output
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_anamic1:
+        description: The LDO regulator for the analog microphone 1
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_anamic2:
+        description: The LDO regulator for the analog microphone 2
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_dmic:
+        description: The LDO regulator for the digital microphone
+          only present on AB8500
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_ana:
+        description: Analog power regulator for CSI and DSI interfaces,
+          Camera Serial Interface CSI and Display Serial Interface DSI.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+
+  regulator-external:
+    description: Node describing the AB8500 external regulators. This
+      concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3
+      that are normally controlled by external electronics but also
+      sometimes need to be explicitly controlled by software.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-ext-regulator
+
+      ab8500_ext1:
+        description: The voltage for the VSMPS1 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ext2:
+        description: The voltage for the VSMPS2 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ext3:
+        description: The voltage for the VSMPS3 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+patternProperties:
+  "^pwm@[1-9]+?$":
+    type: object
+    $ref: ../pwm/pwm.yaml#
+    unevaluatedProperties: false
+    description: Represents each of the PWM blocks in the AB8500
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-pwm
+
+      reg: true
+
+      clocks:
+        items:
+          - description: internal clock
+
+      clock-names:
+        items:
+          - const: intclk
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - clock-controller
+  - gpio
+  - rtc
+  - adc
+  - thermal
+  - ab8500_fg
+  - ab8500_btemp
+  - ab8500_charger
+  - ab8500_chargalg
+  - phy
+  - key
+  - regulator
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
new file mode 100644
index 000000000000..1d4d88f7e82d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
@@ -0,0 +1,279 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/stericsson,db8500-prcmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DB8500 PRCMU - Power Reset and Control Management Unit
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  The DB8500 Power Reset and Control Management Unit is an XP70 8-bit
+  microprocessor that is embedded in the always-on power domain of the
+  DB8500 SoCs to manage the low power states, powering up and down parts
+  of the silicon, and controlling reset of different IP blocks.
+
+properties:
+  $nodename:
+    pattern: '^prcmu@[0-9a-f]+$'
+
+  compatible:
+    description: The device is compatible both to the device-specific
+      compatible "stericsson,db8500-prcmu" and "syscon". The latter
+      compatible is needed for the device to be exposed as a system
+      controller so that arbitrary registers can be access by
+      different operating system components.
+    items:
+      - const: stericsson,db8500-prcmu
+      - const: syscon
+
+  reg:
+    items:
+      - description: Main PRCMU register area
+      - description: PRCMU TCPM register area
+      - description: PRCMU TCDM register area
+
+  reg-names:
+    items:
+      - const: prcmu
+      - const: prcmu-tcpm
+      - const: prcmu-tcdm
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  db8500-prcmu-regulators:
+    description: Node describing the DB8500 regulators. These are mainly
+      power rails inside the silicon but some of those are also routed
+      out to external pins.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,db8500-prcmu-regulator
+
+      db8500_vape:
+        description: The voltage for the application processor, the
+          main voltage domain for the chip.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_varm:
+        description: The voltage for the ARM Cortex A-9 CPU.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_vmodem:
+        description: The voltage for the modem subsystem.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_vpll:
+        description: The voltage for the phase locked loop clocks.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_vsmps1:
+        description: Also known as VIO12, is a step-down voltage regulator
+          for 1.2V I/O. SMPS means System Management Power Source.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_vsmps2:
+        description: Also known as VIO18, is a step-down voltage regulator
+          for 1.8V I/O. SMPS means System Management Power Source.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_vsmps3:
+        description: This is a step-down voltage regulator
+          for 0.87 thru 1.875V I/O. SMPS means System Management Power Source.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_vrf1:
+        description: RF transciever voltage regulator.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_sva_mmdsp:
+        description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP)
+          voltage regulator. This is the voltage for the accelerator DSP
+          for video encoding and decoding.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_sva_mmdsp_ret:
+        description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP)
+          voltage regulator for retention mode.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_sva_pipe:
+        description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP)
+          voltage regulator for the data pipe.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_sia_mmdsp:
+        description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP)
+          voltage regulator. This is the voltage for the accelerator DSP
+          for image encoding and decoding.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_sia_mmdsp_ret:
+        description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP)
+          voltage regulator for retention mode.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_sia_pipe:
+        description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP)
+          voltage regulator for the data pipe.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_sga:
+        description: Smart Graphics Accelerator (SGA) voltage regulator.
+          This is in effect controlling the power to the MALI400 3D
+          accelerator block.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_b2r2_mcde:
+        description: Blit Blend Rotate and Rescale (B2R2), and Multi-Channel
+          Display Engine (MCDE) voltage regulator. These are two graphics
+          blocks.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_esram12:
+        description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_esram12_ret:
+        description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for
+          retention mode.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_esram34:
+        description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+      db8500_esram34_ret:
+        description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for
+          retention mode.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+    required:
+      - compatible
+      - db8500_vape
+      - db8500_varm
+      - db8500_vmodem
+      - db8500_vpll
+      - db8500_vsmps1
+      - db8500_vsmps2
+      - db8500_vsmps3
+      - db8500_vrf1
+      - db8500_sva_mmdsp
+      - db8500_sva_mmdsp_ret
+      - db8500_sva_pipe
+      - db8500_sia_mmdsp
+      - db8500_sia_mmdsp_ret
+      - db8500_sia_pipe
+      - db8500_sga
+      - db8500_b2r2_mcde
+      - db8500_esram12
+      - db8500_esram12_ret
+      - db8500_esram34
+      - db8500_esram34_ret
+
+    additionalProperties: false
+
+patternProperties:
+  "^thermal@[0-9a-f]+$":
+    description: Node describing the DB8500 thermal control functions.
+      This binds to an operating system driver that monitors the
+      temperature of the SoC.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,db8500-thermal
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        items:
+          - description: Hotmon low interrupt (falling temperature)
+          - description: Hotmon high interrupt (rising temperature)
+
+      interrupt-names:
+        items:
+          - const: IRQ_HOTMON_LOW
+          - const: IRQ_HOTMON_HIGH
+
+      '#thermal-sensor-cells':
+        const: 0
+
+    additionalProperties: false
+
+  "^prcmu-timer-4@[0-9a-f]+$":
+    description: Node describing the externally visible timer 4 in the
+      PRCMU block. This timer is interesting to the operating system
+      since even thought it has a very low resolution (32768 Hz) it is
+      always on, and thus provides a consistent monotonic timeline for
+      the system.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,db8500-prcmu-timer-4
+
+      reg:
+        maxItems: 1
+
+    additionalProperties: false
+
+  "^ab850[05]$":
+    description: Node describing the Analog Baseband 8500 mixed-signals
+      ASIC AB8500 and subcomponents. The AB8500 is accessed through the
+      PRCMU and hence it appears here. This component has a separate
+      set of devicetree bindings. The AB8505 is a newer version of the
+      same ASIC.
+    type: object
+    $ref: stericsson,ab8500.yaml#
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - db8500-prcmu-regulators
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt
deleted file mode 100644
index f0c2f7fcf5c7..000000000000
--- a/Documentation/devicetree/bindings/mfd/stmfx.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-STMicroelectonics Multi-Function eXpander (STMFX) Core bindings
-
-ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
-communication with the main MCU. Its main features are GPIO expansion, main
-MCU IDD measurement (IDD is the amount of current that flows through VDD) and
-resistive touchscreen controller.
-
-Required properties:
-- compatible: should be "st,stmfx-0300".
-- reg: I2C slave address of the device.
-- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal.
-  Please refer to ../interrupt-controller/interrupt.txt
-
-Optional properties:
-- drive-open-drain: configure MFX_IRQ_OUT as open drain.
-- vdd-supply: phandle of the regulator supplying STMFX.
-
-Example:
-
-	stmfx: stmfx@42 {
-		compatible = "st,stmfx-0300";
-		reg = <0x42>;
-		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
-		interrupt-parent = <&gpioi>;
-		vdd-supply = <&v3v3>;
-	};
-
-Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings.
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 39375e4313d2..4e4baf53796d 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/syscon.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: System Controller Registers R/W Device Tree Bindings
+title: System Controller Registers R/W
 
 description: |
   System controller node represents a register region containing a set
@@ -17,7 +17,7 @@ description: |
   and access the registers directly.
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
 
 select:
   properties:
@@ -33,17 +33,49 @@ properties:
   compatible:
     anyOf:
       - items:
-        - enum:
-          - allwinner,sun8i-a83t-system-controller
-          - allwinner,sun8i-h3-system-controller
-          - allwinner,sun8i-v3s-system-controller
-          - allwinner,sun50i-a64-system-controller
-
-        - const: syscon
+          - enum:
+              - allwinner,sun8i-a83t-system-controller
+              - allwinner,sun8i-h3-system-controller
+              - allwinner,sun8i-v3s-system-controller
+              - allwinner,sun50i-a64-system-controller
+              - brcm,cru-clkset
+              - freecom,fsg-cs2-system-controller
+              - fsl,imx93-aonmix-ns-syscfg
+              - fsl,imx93-wakeupmix-syscfg
+              - hisilicon,dsa-subctrl
+              - hisilicon,hi6220-sramctrl
+              - hisilicon,pcie-sas-subctrl
+              - hisilicon,peri-subctrl
+              - intel,lgm-syscon
+              - marvell,armada-3700-usb2-host-misc
+              - mediatek,mt8135-pctl-a-syscfg
+              - mediatek,mt8135-pctl-b-syscfg
+              - microchip,lan966x-cpu-syscon
+              - microchip,sparx5-cpu-syscon
+              - mstar,msc313-pmsleep
+              - rockchip,px30-qos
+              - rockchip,rk3036-qos
+              - rockchip,rk3066-qos
+              - rockchip,rk3228-qos
+              - rockchip,rk3288-qos
+              - rockchip,rk3368-qos
+              - rockchip,rk3399-qos
+              - rockchip,rk3568-qos
+              - rockchip,rk3588-qos
+              - rockchip,rv1126-qos
+              - samsung,exynos3-sysreg
+              - samsung,exynos4-sysreg
+              - samsung,exynos5-sysreg
+              - samsung,exynos5433-sysreg
+              - samsung,exynos850-sysreg
+              - samsung,exynosautov9-sysreg
+
+          - const: syscon
 
       - contains:
           const: syscon
-        additionalItems: true
+        minItems: 2
+        maxItems: 5  # Should be enough
 
   reg:
     maxItems: 1
@@ -52,9 +84,7 @@ properties:
     description: |
       The size (in bytes) of the IO accesses that should be performed
       on the device.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 1, 2, 4, 8 ]
+    enum: [1, 2, 4, 8]
 
   hwlocks:
     maxItems: 1
@@ -65,7 +95,19 @@ required:
   - compatible
   - reg
 
-unevaluatedProperties: false
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: simple-mfd
+    then:
+      properties:
+        compatible:
+          minItems: 3
+          maxItems: 5
+
+additionalProperties: true
 
 examples:
   - |
@@ -73,12 +115,4 @@ examples:
         compatible = "allwinner,sun8i-h3-system-controller", "syscon";
         reg = <0x01c00000 0x1000>;
     };
-
-  - |
-    gpr: iomuxc-gpr@20e0000 {
-        compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
-        reg = <0x020e0000 0x38>;
-        hwlocks = <&hwlock1 1>;
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
new file mode 100644
index 000000000000..34bf6a01436f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,am3359-tscadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 Touchscreen controller/ADC
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,am3359-tscadc
+      - items:
+          - const: ti,am654-tscadc
+          - const: ti,am3359-tscadc
+      - const: ti,am4372-magadc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for FIFO0
+      - description: DMA controller phandle and request line for FIFO1
+
+  dma-names:
+    items:
+      - const: fifo0
+      - const: fifo1
+
+  adc:
+    type: object
+    description: ADC child
+
+  tsc:
+    type: object
+    description: Touchscreen controller child
+
+  mag:
+    type: object
+    description: Magnetic reader
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tscadc@0 {
+        compatible = "ti,am3359-tscadc";
+        reg = <0x0 0x1000>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&adc_tsc_fck>;
+        clock-names = "fck";
+        dmas = <&edma 53 0>, <&edma 57 0>;
+        dma-names = "fifo0", "fifo1";
+
+        tsc {
+        };
+
+        adc {
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
new file mode 100644
index 000000000000..873ee0c0973f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,j721e-system-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721e System Controller Registers R/W
+
+description: |
+  This represents the Control Module registers (CTRL_MMR0) on the SoC.
+  System controller node represents a register region containing a set
+  of miscellaneous registers. The registers are not cohesive enough to
+  represent as any specific type of device. The typical use-case is
+  for some other node's driver, or platform-specific code, to acquire
+  a reference to the syscon node (e.g. by phandle, node path, or
+  search using a specific compatible value), interrogate the node (or
+  associated OS driver) to determine the location of the registers,
+  and access the registers directly.
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,j721e-system-controller
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  # Optional children
+  "^mux-controller@[0-9a-f]+$":
+    type: object
+    description:
+      This is the SERDES lane control mux.
+
+  "^clock-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
+    description:
+      Clock provider for TI EHRPWM nodes.
+
+  "phy@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/phy/ti,phy-gmii-sel.yaml#
+    description:
+      The phy node corresponding to the ethernet MAC.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    scm_conf: scm-conf@100000 {
+        compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+        reg = <0x00100000 0x1c000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        serdes_ln_ctrl: mux-controller@4080 {
+            compatible = "mmio-mux";
+            reg = <0x00004080 0x50>;
+
+            #mux-control-cells = <1>;
+            mux-reg-masks =
+                <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+                <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
+                <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
+                <0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
+                <0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
+                /* SERDES4 lane0/1/2/3 select */
+        };
+
+        clock-controller@4140 {
+            compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+            reg = <0x4140 0x18>;
+            #clock-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
new file mode 100644
index 000000000000..f6cac4b1079c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87524-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87524-Q1 four 1-phase output buck converter
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    const: ti,lp87524-q1
+
+  reg:
+    description: I2C slave address
+    const: 0x60
+
+  reset-gpios:
+    description: GPIO connected to NRST pin (active low reset, pin 20)
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number.
+      The second cell is is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+    const: 2
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[0123]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+    required:
+      - buck0
+      - buck1
+      - buck2
+      - buck3
+
+    additionalProperties: false
+
+patternProperties:
+  "^buck[0123]-in-supply$":
+    description: Voltage regulator supply for each BUCK converter
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - buck0-in-supply
+  - buck1-in-supply
+  - buck2-in-supply
+  - buck3-in-supply
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "ti,lp87524-q1";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck0-in-supply = <&vdd_5v0>;
+            buck1-in-supply = <&vdd_5v0>;
+            buck2-in-supply = <&vdd_5v0>;
+            buck3-in-supply = <&vdd_5v0>;
+
+            regulators {
+                buck0_reg: buck0 {
+                    regulator-name = "buck0";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                buck1_reg: buck1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <1350000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                };
+
+                buck2_reg: buck2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-always-on;
+                };
+
+                buck3_reg: buck3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
new file mode 100644
index 000000000000..dc5a29b5ef7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87561-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87561-Q1 single 4-phase output buck converter
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    const: ti,lp87561-q1
+
+  reg:
+    description: I2C slave address
+    const: 0x60
+
+  reset-gpios:
+    description: GPIO connected to NRST pin (active low reset, pin 20)
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number.
+      The second cell is is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+    const: 2
+
+  buck3210-in-supply:
+    description:
+      Voltage regulator supply for all the four BUCK converters.
+
+  regulators:
+    type: object
+
+    properties:
+      buck3210:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+    required:
+      - buck3210
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - buck3210-in-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "ti,lp87561-q1";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck3210-in-supply = <&vsys_3v3>;
+
+            regulators {
+                buck3210_reg: buck3210 {
+                    /* VDD_CORE */
+                    regulator-name = "buck3210";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
new file mode 100644
index 000000000000..012d25111054
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87565-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87565-Q1 / LP87565 dual 2-phase output buck converter
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,lp87565
+      - ti,lp87565-q1
+
+  reg:
+    description: I2C slave address
+    const: 0x60
+
+  reset-gpios:
+    description: GPIO connected to NRST pin (active low reset, pin 20)
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number.
+      The second cell is is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+    const: 2
+
+  buck10-in-supply:
+    description:
+      Voltage regulator supply for BUCK0 and BUCK1 converters.
+
+  buck23-in-supply:
+    description:
+      Voltage regulator supply for BUCK2 and BUCK3 converters.
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck(10|23)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+    required:
+      - buck10
+      - buck23
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - buck10-in-supply
+  - buck23-in-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "ti,lp87565-q1";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck10-in-supply = <&vsys_3v3>;
+            buck23-in-supply = <&vsys_3v3>;
+
+            regulators {
+                buck10_reg: buck10 {
+                    /* VDD_MPU */
+                    regulator-name = "buck10";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+
+                buck23_reg: buck23 {
+                    /* VDD_GPU */
+                    regulator-name = "buck23";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
new file mode 100644
index 000000000000..3fdd9cb5b347
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,tps65086.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65086 Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: ti,tps65086
+
+  reg:
+    const: 0x5e
+    description: I2C slave address
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      The first cell is the IRQ number. The second cell is the flags,
+      encoded as trigger masks from ../interrupt-controller/interrupts.txt.
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description: |
+      The first cell is the pin number and the second cell is used to specify
+      flags.  See ../gpio/gpio.txt for more information.
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description: |
+      List of child nodes that specify the regulator initialization data.
+      Child nodes must be named after their hardware counterparts:
+      buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.
+      Each child node is defined using the standard binding for regulators and
+      the optional regulator properties defined below.
+
+    patternProperties:
+      "^buck[1-6]$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          ti,regulator-step-size-25mv:
+            type: boolean
+            description: |
+              Set this if the regulator is factory set with a 25mv step voltage
+              mapping.
+          ti,regulator-decay:
+            type: boolean
+            description: |
+              Set this if the output needs to decay, default is for the output
+              to slew down.
+
+        additionalProperties: false
+
+      "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+
+        additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic: pmic@5e {
+            compatible = "ti,tps65086";
+            reg = <0x5e>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            regulators {
+                buck1 {
+                    regulator-name = "vcc1";
+                    regulator-min-microvolt = <1600000>;
+                    regulator-max-microvolt = <1600000>;
+                    regulator-boot-on;
+                    ti,regulator-decay;
+                    ti,regulator-step-size-25mv;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
deleted file mode 100644
index 67eac0ed32df..000000000000
--- a/Documentation/devicetree/bindings/mfd/tps65086.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* TPS65086 Power Management Integrated Circuit (PMIC) bindings
-
-Required properties:
- - compatible		: Should be "ti,tps65086".
- - reg			: I2C slave address.
- - interrupts		: The interrupt line the device is connected to.
- - interrupt-controller	: Marks the device node as an interrupt controller.
- - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
-			    The first cell is the IRQ number.
-			    The second cell is the flags, encoded as trigger
-			    masks from ../interrupt-controller/interrupts.txt.
- - gpio-controller      : Marks the device node as a GPIO Controller.
- - #gpio-cells          : Should be two.  The first cell is the pin number and
-                            the second cell is used to specify flags.
-                            See ../gpio/gpio.txt for more information.
- - regulators:          : List of child nodes that specify the regulator
-                            initialization data. Child nodes must be named
-                            after their hardware counterparts: buck[1-6],
-                            ldoa[1-3], swa1, swb[1-2], and vtt. Each child
-                            node is defined using the standard binding for
-                            regulators and the optional regulator properties
-                            defined below.
-
-Optional regulator properties:
- - ti,regulator-step-size-25mv	: This is applicable for buck[1-6], set this
-				    if the regulator is factory set with a 25mv
-				    step voltage mapping.
- - ti,regulator-decay		: This is applicable for buck[1-6], set this if
-				    the output needs to decay, default is for
-				    the output to slew down.
-
-Example:
-
-	pmic: tps65086@5e {
-		compatible = "ti,tps65086";
-		reg = <0x5e>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		regulators {
-			buck1 {
-				regulator-name = "vcc1";
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <1600000>;
-				regulator-boot-on;
-				ti,regulator-decay;
-				ti,regulator-step-size-25mv;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/twl-family.txt b/Documentation/devicetree/bindings/mfd/twl-family.txt
index 56f244b5d8a4..c2f9302965de 100644
--- a/Documentation/devicetree/bindings/mfd/twl-family.txt
+++ b/Documentation/devicetree/bindings/mfd/twl-family.txt
@@ -26,7 +26,7 @@ Optional node:
 Example:
 /*
  * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ * https://www.ti.com/lit/ds/symlink/twl6030.pdf
  */
 twl@48 {
     compatible = "ti,twl6030";
diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
new file mode 100644
index 000000000000..ea3337dafaf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
@@ -0,0 +1,281 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  These devices are audio SoCs with extensive digital capabilities and a
+  range of analogue I/O.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+  - $ref: /schemas/sound/wlf,arizona.yaml#
+  - $ref: /schemas/regulator/wlf,arizona.yaml#
+  - $ref: /schemas/extcon/wlf,arizona.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l24
+              - wlf,wm1831
+    then:
+      required:
+        - DCVDD-supply
+        - MICVDD-supply
+    else:
+      properties:
+        LDOVDD-supply:
+          description:
+            Digital power supply, used internally to generate DCVDD when
+            internally supplied.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - wlf,wm1814
+              - wlf,wm5102
+              - wlf,wm5110
+              - wlf,wm8280
+              - wlf,wm8997
+              - wlf,wm8998
+    then:
+      properties:
+        DBVDD2-supply:
+          description:
+            Databus power supply.
+
+      required:
+        - DBVDD2-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - wlf,wm1814
+              - wlf,wm5102
+              - wlf,wm5110
+              - wlf,wm8280
+              - wlf,wm8998
+    then:
+      properties:
+        DBVDD3-supply:
+          description:
+            Databus power supply.
+
+      required:
+        - DBVDD3-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l24
+              - wlf,wm1831
+              - wlf,wm8997
+    then:
+      properties:
+        SPKVDD-supply:
+          description:
+            Mono speaker driver power supply.
+
+      required:
+        - SPKVDD-supply
+    else:
+      properties:
+        SPKVDDL-supply:
+          description:
+            Left speaker driver power supply.
+
+        SPKVDDR-supply:
+          description:
+            Right speaker driver power supply.
+
+      required:
+        - SPKVDDL-supply
+        - SPKVDDR-supply
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs47l24
+      - wlf,wm1814
+      - wlf,wm1831
+      - wlf,wm5102
+      - wlf,wm5110
+      - wlf,wm8280
+      - wlf,wm8997
+      - wlf,wm8998
+
+  reg:
+    maxItems: 1
+
+  AVDD-supply:
+    description:
+      Analogue power supply.
+
+  CPVDD-supply:
+    description:
+      Charge pump power supply.
+
+  DBVDD1-supply:
+    description:
+      Databus power supply.
+
+  DCVDD-supply:
+    description:
+      Digital power supply, normally supplied internally except on cs47l24,
+      wm1831 where it is mandatory.
+
+  MICVDD-supply:
+    description:
+      Microphone power supply, normally supplied internally except on
+      cs47l24, wm1831 where it is mandatory.
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number and the second cell is used to
+      specify optional parameters.
+    const: 2
+
+  wlf,gpio-defaults:
+    description:
+      A list of GPIO configuration register values. Defines for the
+      appropriate values can found in dt-bindings/mfd/arizona.h. If
+      absent, no configuration of these registers is performed. If any
+      entry has a value that is out of range for a 16 bit register then the
+      chip default will be used. If present exactly five values must be
+      specified.
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    minItems: 1
+    maxItems: 5
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      The first cell is the IRQ number.  The second cell is the flags,
+      encoded as trigger masks.
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Should reference the clocks supplied on MCLK1 and MCLK2.
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    description:
+      Should contains two strings mclk1 for the clock supplied on MCLK1,
+      recommended to be a high quality audio reference clock mclk2 for the
+      clock supplied on MCLK2, recommended to be an always on 32k clock.
+    oneOf:
+      - items:
+          - const: mclk1
+      - items:
+          - const: mclk2
+      - items:
+          - const: mclk1
+          - const: mclk2
+
+  reset-gpios:
+    maxItems: 1
+
+  wlf,reset:
+    description:
+      GPIO specifier for the GPIO controlling RESET
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - AVDD-supply
+  - CPVDD-supply
+  - DBVDD1-supply
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/mfd/arizona.h>
+    i2c@e0004000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0004000 0x1000>;
+
+        wm5102: codec@1a {
+            compatible = "wlf,wm5102";
+            reg = <0x1a>;
+
+            reset-gpios = <&gpio 0>;
+            wlf,ldoena = <&gpio 1>;
+
+            AVDD-supply = <&vdd1v8>;
+            DBVDD1-supply = <&vdd1v8>;
+            DBVDD2-supply = <&vdd1v8>;
+            DBVDD3-supply = <&vdd1v8>;
+            CPVDD-supply = <&vdd1v8>;
+            LDOVDD-supply = <&vdd1v8>;
+            SPKVDDL-supply = <&vdd5v>;
+            SPKVDDR-supply = <&vdd5v>;
+
+            interrupts = <347>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&gic>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            #sound-dai-cells = <1>;
+
+            wlf,gpio-defaults = <
+                ARIZONA_GP_FN_TXLRCLK
+                ARIZONA_GP_DEFAULT
+                ARIZONA_GP_DEFAULT
+                ARIZONA_GP_DEFAULT
+                ARIZONA_GP_DEFAULT
+            >;
+
+            clocks = <&clks 0>, <&clks 1>;
+            clock-names = "mclk1", "mclk2";
+
+            wlf,inmode = <ARIZONA_INMODE_DIFF ARIZONA_INMODE_DMIC>;
+            wlf,dmic-ref = <ARIZONA_DMIC_MICBIAS1 ARIZONA_DMIC_MICBIAS3>;
+
+            wlf,use-jd2;
+            wlf,use-jd2-nopull;
+            wlf,jd-invert;
+
+            wlf,micd-software-compare;
+            wlf,micd-detect-debounce = <0>;
+            wlf,micd-pol-gpio = <&codec 2 0>;
+            wlf,micd-rate = <ARIZONA_MICD_TIME_8MS>;
+            wlf,micd-dbtime = <4>;
+            wlf,micd-timeout-ms = <100>;
+            wlf,micd-force-micbias;
+            wlf,micd-configs = <0 ARIZONA_DMIC_MICBIAS1 0>,
+                               <0x2000 ARIZONA_DMIC_MICBIAS2 1>;
+
+            wlf,gpsw = <ARIZONA_GPSW_OPEN>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
new file mode 100644
index 000000000000..309606d2d806
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: X-Powers AC100
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+
+properties:
+  compatible:
+    const: x-powers,ac100
+
+  reg:
+    maxItems: 1
+
+  codec:
+    type: object
+
+    properties:
+      "#clock-cells":
+        const: 0
+
+      compatible:
+        const: x-powers,ac100-codec
+
+      interrupts:
+        maxItems: 1
+
+      clock-output-names:
+        maxItems: 1
+        description: >
+          Name of the 4M_adda clock exposed by the codec
+
+    required:
+      - "#clock-cells"
+      - compatible
+      - interrupts
+      - clock-output-names
+
+    additionalProperties: false
+
+  rtc:
+    type: object
+
+    properties:
+      "#clock-cells":
+        const: 1
+
+      compatible:
+        const: x-powers,ac100-rtc
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+        description: >
+           A phandle to the codec's "4M_adda" clock
+
+      clock-output-names:
+        maxItems: 3
+        description: >
+          Name of the cko1, cko2 and cko3 clocks exposed by the codec
+
+    required:
+      - "#clock-cells"
+      - compatible
+      - interrupts
+      - clocks
+      - clock-output-names
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - codec
+  - rtc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rsb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@e89 {
+            compatible = "x-powers,ac100";
+            reg = <0xe89>;
+
+            ac100_codec: codec {
+                compatible = "x-powers,ac100-codec";
+                interrupt-parent = <&r_pio>;
+                interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+                #clock-cells = <0>;
+                clock-output-names = "4M_adda";
+            };
+
+            ac100_rtc: rtc {
+                compatible = "x-powers,ac100-rtc";
+                interrupt-parent = <&nmi_intc>;
+                interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+                clocks = <&ac100_codec>;
+                #clock-cells = <1>;
+                clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc";
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
new file mode 100644
index 000000000000..b7a8747d5fa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@@ -0,0 +1,404 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: X-Powers AXP PMIC
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - x-powers,axp152
+              - x-powers,axp202
+              - x-powers,axp209
+
+    then:
+      properties:
+        regulators:
+          properties:
+            x-powers,dcdc-freq:
+              minimum: 750
+              maximum: 1875
+              default: 1500
+
+    else:
+      properties:
+        regulators:
+          properties:
+            x-powers,dcdc-freq:
+              minimum: 1800
+              maximum: 4050
+              default: 3000
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - x-powers,axp152
+              - x-powers,axp202
+              - x-powers,axp209
+
+    then:
+      not:
+        required:
+          - x-powers,drive-vbus-en
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: x-powers,axp806
+
+    then:
+      allOf:
+        - not:
+            required:
+              - x-powers,self-working-mode
+
+        - not:
+            required:
+              - x-powers,master-mode
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: x-powers,axp305
+
+    then:
+      required:
+        - interrupts
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - x-powers,axp152
+          - x-powers,axp202
+          - x-powers,axp209
+          - x-powers,axp221
+          - x-powers,axp223
+          - x-powers,axp803
+          - x-powers,axp806
+          - x-powers,axp809
+          - x-powers,axp813
+      - items:
+          - const: x-powers,axp228
+          - const: x-powers,axp221
+      - items:
+          - const: x-powers,axp805
+          - const: x-powers,axp806
+      - items:
+          - const: x-powers,axp305
+          - const: x-powers,axp805
+          - const: x-powers,axp806
+      - items:
+          - const: x-powers,axp818
+          - const: x-powers,axp813
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  x-powers,drive-vbus-en:
+    type: boolean
+    description: >
+      Set this when the N_VBUSEN pin is used as an output pin to control an
+      external regulator to drive the OTG VBus, rather then as an input pin
+      which signals whether the board is driving OTG VBus or not.
+
+  x-powers,self-working-mode:
+    type: boolean
+    description: >
+      Set this when the PMIC is wired for self-working mode through the MODESET
+      pin.
+
+  x-powers,master-mode:
+    type: boolean
+    description: >
+      Set this when the PMIC is wired for master mode through the MODESET pin.
+
+  vin1-supply:
+    description: >
+      DCDC1 power supply node, if present.
+
+  vin2-supply:
+    description: >
+      DCDC2 power supply node, if present.
+
+  vin3-supply:
+    description: >
+      DCDC3 power supply node, if present.
+
+  vin4-supply:
+    description: >
+      DCDC4 power supply node, if present.
+
+  vin5-supply:
+    description: >
+      DCDC5 power supply node, if present.
+
+  vin6-supply:
+    description: >
+      DCDC6 power supply node, if present.
+
+  vin7-supply:
+    description: >
+      DCDC7 power supply node, if present.
+
+  vina-supply:
+    description: >
+      DCDCA power supply node, if present.
+
+  vinb-supply:
+    description: >
+      DCDCB power supply node, if present.
+
+  vinc-supply:
+    description: >
+      DCDCC power supply node, if present.
+
+  vind-supply:
+    description: >
+      DCDCD power supply node, if present.
+
+  vine-supply:
+    description: >
+      DCDCE power supply node, if present.
+
+  acin-supply:
+    description: >
+      LDO1 power supply node, if present.
+
+  ldo24in-supply:
+    description: >
+      LDO2 and LDO4 power supply node, if present.
+
+  ldo3in-supply:
+    description: >
+      LDO3 power supply node, if present.
+
+  ldo5in-supply:
+    description: >
+      LDO5 power supply node, if present.
+
+  aldoin-supply:
+    description: >
+      ALDO* power supply node, if present.
+
+  bldoin-supply:
+    description: >
+      BLDO* power supply node, if present.
+
+  cldoin-supply:
+    description: >
+      CLDO* power supply node, if present.
+
+  dldoin-supply:
+    description: >
+      DLDO* power supply node, if present.
+
+  eldoin-supply:
+    description: >
+      ELDO* power supply node, if present.
+
+  fldoin-supply:
+    description: >
+      FLDO* power supply node, if present.
+
+  ips-supply:
+    description: >
+      LDO_IO0, LDO_IO1 and RTC_LDO power supply node, if present.
+
+  drivevbus-supply:
+    description: >
+      DRIVEVBUS power supply node, if present.
+
+  swin-supply:
+    description: >
+      SW power supply node, if present.
+
+  adc:
+    $ref: /schemas/iio/adc/x-powers,axp209-adc.yaml#
+
+  gpio:
+    $ref: /schemas/gpio/x-powers,axp209-gpio.yaml#
+
+  ac-power:
+    $ref: /schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#
+
+  battery-power:
+    $ref: /schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#
+
+  usb-power:
+    $ref: /schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#
+
+  regulators:
+    type: object
+
+    properties:
+      x-powers,dcdc-freq:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Defines the work frequency of DC-DC in kHz.
+
+    patternProperties:
+      "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          regulator-ramp-delay:
+            description: >
+              Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on
+              the AXP209.
+
+          regulator-soft-start:
+            description: >
+              Only valid for the LDO3 regulator.
+
+          x-powers,dcdc-workmode:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1]
+            description: >
+              Only valid for DCDC regulators. Setup 1 for PWM mode, 0
+              for AUTO (PWM/PFM) mode. The DCDC regulators work in a
+              mixed PWM/PFM mode, using PFM under light loads and
+              switching to PWM for heavier loads. Forcing PWM mode
+              trades efficiency under light loads for lower output
+              noise. This probably makes sense for HiFi audio related
+              applications that aren't battery constrained.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+      i2c0 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pmic@30 {
+              compatible = "x-powers,axp152";
+              reg = <0x30>;
+              interrupts = <0>;
+              interrupt-controller;
+              #interrupt-cells = <1>;
+          };
+      };
+
+  - |
+      #include <dt-bindings/interrupt-controller/irq.h>
+
+      i2c0 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pmic@34 {
+              compatible = "x-powers,axp209";
+              reg = <0x34>;
+              interrupt-parent = <&nmi_intc>;
+              interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+              interrupt-controller;
+              #interrupt-cells = <1>;
+
+              ac_power_supply: ac-power {
+                  compatible = "x-powers,axp202-ac-power-supply";
+              };
+
+              axp_adc: adc {
+                  compatible = "x-powers,axp209-adc";
+                  #io-channel-cells = <1>;
+              };
+
+              axp_gpio: gpio {
+                  compatible = "x-powers,axp209-gpio";
+                  gpio-controller;
+                  #gpio-cells = <2>;
+
+                  gpio0-adc-pin {
+                      pins = "GPIO0";
+                      function = "adc";
+                  };
+              };
+
+              battery_power_supply: battery-power {
+                  compatible = "x-powers,axp209-battery-power-supply";
+              };
+
+              regulators {
+                  /* Default work frequency for buck regulators */
+                  x-powers,dcdc-freq = <1500>;
+
+                  reg_dcdc2: dcdc2 {
+                      regulator-always-on;
+                      regulator-min-microvolt = <1000000>;
+                      regulator-max-microvolt = <1450000>;
+                      regulator-name = "vdd-cpu";
+                  };
+
+                  reg_dcdc3: dcdc3 {
+                      regulator-always-on;
+                      regulator-min-microvolt = <1000000>;
+                      regulator-max-microvolt = <1400000>;
+                      regulator-name = "vdd-int-dll";
+                  };
+
+                  reg_ldo1: ldo1 {
+                      /* LDO1 is a fixed output regulator */
+                      regulator-always-on;
+                      regulator-min-microvolt = <1300000>;
+                      regulator-max-microvolt = <1300000>;
+                      regulator-name = "vdd-rtc";
+                  };
+
+                  reg_ldo2: ldo2 {
+                      regulator-always-on;
+                      regulator-min-microvolt = <3000000>;
+                      regulator-max-microvolt = <3000000>;
+                      regulator-name = "avcc";
+                  };
+
+                  reg_ldo3: ldo3 {
+                      regulator-name = "ldo3";
+                  };
+
+                  reg_ldo4: ldo4 {
+                      regulator-name = "ldo4";
+                  };
+
+                  reg_ldo5: ldo5 {
+                      regulator-name = "ldo5";
+                  };
+              };
+
+              usb_power_supply: usb-power {
+                  compatible = "x-powers,axp202-usb-power-supply";
+              };
+          };
+      };
diff --git a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
index abc9937506e0..9efd49c39bd2 100644
--- a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
+++ b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
@@ -26,6 +26,12 @@ properties:
   reg:
     maxItems: 1
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
 select:
   properties:
     compatible:
@@ -36,15 +42,22 @@ select:
   required:
     - compatible
 
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    $ref: /schemas/gpio/xylon,logicvc-gpio.yaml#
+
+  "^display@[0-9a-f]+$":
+    $ref: /schemas/display/xylon,logicvc-display.yaml#
+
 required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     logicvc: logicvc@43c00000 {
       compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd";
       reg = <0x43c00000 0x6000>;
-      #address-cells = <1>;
-      #size-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
deleted file mode 100644
index f080f06da6d8..000000000000
--- a/Documentation/devicetree/bindings/mips/cpu_irq.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-MIPS CPU interrupt controller
-
-On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
-IRQs from a devicetree file and create a irq_domain for IRQ controller.
-
-With the irq_domain in place we can describe how the 8 IRQs are wired to the
-platforms internal interrupt controller cascade.
-
-Below is an example of a platform describing the cascade inside the devicetree
-and the code used to load it inside arch_init_irq().
-
-Required properties:
-- compatible : Should be "mti,cpu-interrupt-controller"
-
-Example devicetree:
-	cpu-irq: cpu-irq {
-		#address-cells = <0>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		compatible = "mti,cpu-interrupt-controller";
-	};
-
-	intc: intc@200 {
-		compatible = "ralink,rt2880-intc";
-		reg = <0x200 0x100>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		interrupt-parent = <&cpu-irq>;
-		interrupts = <2>;
-	};
-
-
-Example platform irq.c:
-static struct of_device_id __initdata of_irq_ids[] = {
-	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
-	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
-	{},
-};
-
-void __init arch_init_irq(void)
-{
-	of_irq_init(of_irq_ids);
-}
diff --git a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
index 78dcf6ef3883..ee00d414df10 100644
--- a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
+++ b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
@@ -8,7 +8,8 @@ title: Ingenic XBurst based Platforms Device Tree Bindings
 
 maintainers:
   - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
-description: |
+
+description:
   Devices with a Ingenic XBurst CPU shall have the following properties.
 
 properties:
@@ -20,16 +21,38 @@ properties:
       - description: Qi Hardware Ben NanoNote
         items:
           - const: qi,lb60
+          - const: ingenic,jz4740
+
+      - description: YLM RetroMini RS-90
+        items:
+          - const: ylm,rs90
+          - const: ingenic,jz4725b
 
       - description: Game Consoles Worldwide GCW Zero
         items:
           - const: gcw,zero
+          - const: ingenic,jz4770
 
       - description: MIPS Creator CI20
         items:
           - const: img,ci20
+          - const: ingenic,jz4780
 
-      - description: YSH & ATIL General Board CU Neo
+      - description: YSH & ATIL General Board, CU1000 Module with Neo Backplane
         items:
           - const: yna,cu1000-neo
+          - const: ingenic,x1000e
+
+      - description: YSH & ATIL General Board, CU1830 Module with Neo Backplane
+        items:
+          - const: yna,cu1830-neo
+          - const: ingenic,x1830
+
+      - description: YSH & ATIL General Board, CU2000 Module with Neo Backplane
+        items:
+          - const: yna,cu2000-neo
+          - const: ingenic,x2000e
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml
new file mode 100644
index 000000000000..b7e7fa715437
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/ingenic/ingenic,cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Ingenic XBurst family CPUs
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+  Ingenic XBurst family CPUs shall have the following properties.
+
+properties:
+  compatible:
+    oneOf:
+
+      - description: Ingenic XBurst®1 CPU Cores
+        enum:
+          - ingenic,xburst-mxu1.0
+          - ingenic,xburst-fpu1.0-mxu1.1
+          - ingenic,xburst-fpu2.0-mxu2.0
+
+      - description: Ingenic XBurst®2 CPU Cores
+        enum:
+          - ingenic,xburst2-fpu2.1-mxu2.1-smt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  device_type: true
+
+required:
+  - device_type
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu0: cpu@0 {
+                device_type = "cpu";
+                compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+                reg = <0>;
+
+                clocks = <&cgu JZ4780_CLK_CPU>;
+        };
+
+        cpu1: cpu@1 {
+                device_type = "cpu";
+                compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+                reg = <1>;
+
+                clocks = <&cgu JZ4780_CLK_CORE1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mips/lantiq/lantiq,cgu.yaml b/Documentation/devicetree/bindings/mips/lantiq/lantiq,cgu.yaml
new file mode 100644
index 000000000000..d5805725befb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/lantiq/lantiq,cgu.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/lantiq/lantiq,cgu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq Xway SoC series Clock Generation Unit (CGU)
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - lantiq,cgu-xway
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cgu@103000 {
+        compatible = "lantiq,cgu-xway";
+        reg = <0x103000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/mips/lantiq/lantiq,dma-xway.yaml b/Documentation/devicetree/bindings/mips/lantiq/lantiq,dma-xway.yaml
new file mode 100644
index 000000000000..40130fefa2b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/lantiq/lantiq,dma-xway.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/lantiq/lantiq,dma-xway.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq Xway SoCs DMA Controller DT bindings
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - lantiq,dma-xway
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dma@e104100 {
+        compatible = "lantiq,dma-xway";
+        reg = <0xe104100 0x800>;
+    };
diff --git a/Documentation/devicetree/bindings/mips/lantiq/lantiq,ebu.yaml b/Documentation/devicetree/bindings/mips/lantiq/lantiq,ebu.yaml
new file mode 100644
index 000000000000..0fada1f085a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/lantiq/lantiq,ebu.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/lantiq/lantiq,ebu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq Xway SoC series External Bus Unit (EBU)
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - lantiq,ebu-xway
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ebu@105300 {
+        compatible = "lantiq,ebu-xway";
+        reg = <0x105300 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/mips/lantiq/lantiq,pmu.yaml b/Documentation/devicetree/bindings/mips/lantiq/lantiq,pmu.yaml
new file mode 100644
index 000000000000..4982b458ac12
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/lantiq/lantiq,pmu.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/lantiq/lantiq,pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq Xway SoC series Power Management Unit (PMU)
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - lantiq,pmu-xway
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmu@102000 {
+        compatible = "lantiq,pmu-xway";
+        reg = <0x102000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
index 58d51f480c9e..8ec6191c1712 100644
--- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
@@ -2,7 +2,7 @@ Lantiq XWAY SoC RCU binding
 ===========================
 
 This binding describes the RCU (reset controller unit) multifunction device,
-where each sub-device has it's own set of registers.
+where each sub-device has its own set of registers.
 
 The RCU register range is used for multiple purposes. Mostly one device
 uses one or multiple register exclusively, but for some registers some
diff --git a/Documentation/devicetree/bindings/mips/loongson/devices.yaml b/Documentation/devicetree/bindings/mips/loongson/devices.yaml
new file mode 100644
index 000000000000..9fee6708e6f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/loongson/devices.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/loongson/devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson based Platforms Device Tree Bindings
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+description: |
+  Devices with a Loongson CPU shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Classic Loongson64 Quad Core + LS7A
+        items:
+          - const: loongson,loongson64c-4core-ls7a
+
+      - description: Classic Loongson64 Quad Core + RS780E
+        items:
+          - const: loongson,loongson64c-4core-rs780e
+
+      - description: Classic Loongson64 Octa Core + RS780E
+        items:
+          - const: loongson,loongson64c-8core-rs780e
+
+      - description: Generic Loongson64 Quad Core + LS7A
+        items:
+          - const: loongson,loongson64g-4core-ls7a
+
+      - description: Virtual Loongson64 Quad Core + VirtIO
+        items:
+          - const: loongson,loongson64v-4core-virtio
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml
new file mode 100644
index 000000000000..20b5836efd90
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson 2K1000 PM Controller
+
+maintainers:
+  - Qing Zhang <zhangqing@loongson.cn>
+
+description: |
+  This controller can be found in Loongson-2K1000 Soc systems.
+
+properties:
+  compatible:
+    const: loongson,ls2k-pm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pm: reset-controller@1fe07000 {
+            compatible = "loongson,ls2k-pm";
+            reg = <0 0x1fe07000 0 0x422>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml
new file mode 100644
index 000000000000..7c0f9022202c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mips/loongson/rs780e-acpi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson RS780E PCH ACPI Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |
+  This controller can be found in Loongson-3 systems with RS780E PCH.
+
+properties:
+  compatible:
+    const: loongson,rs780e-acpi
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    isa@0 {
+      compatible = "isa";
+      #address-cells = <2>;
+      #size-cells = <1>;
+      ranges = <1 0 0 0x1000>;
+
+      acpi@800 {
+        compatible = "loongson,rs780e-acpi";
+        reg = <1 0x800 0x100>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt
index bc817e984628..cc916eaeed0a 100644
--- a/Documentation/devicetree/bindings/mips/mscc.txt
+++ b/Documentation/devicetree/bindings/mips/mscc.txt
@@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following
 properties:
 
 Required properties:
-- compatible: "mscc,ocelot"
+- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jr2"
 
 
 * Other peripherals:
diff --git a/Documentation/devicetree/bindings/mips/ralink.txt b/Documentation/devicetree/bindings/mips/ralink.txt
deleted file mode 100644
index 8cc0ab41578c..000000000000
--- a/Documentation/devicetree/bindings/mips/ralink.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Ralink MIPS SoC device tree bindings
-
-1. SoCs
-
-Each device tree must specify a compatible value for the Ralink SoC
-it uses in the compatible property of the root node. The compatible
-value must be one of the following values:
-
-  ralink,rt2880-soc
-  ralink,rt3050-soc
-  ralink,rt3052-soc
-  ralink,rt3350-soc
-  ralink,rt3352-soc
-  ralink,rt3883-soc
-  ralink,rt5350-soc
-  ralink,mt7620a-soc
-  ralink,mt7620n-soc
-  ralink,mt7628a-soc
-  ralink,mt7688a-soc
-
-2. Boards
-
-GARDENA smart Gateway (MT7688)
-
-This board is based on the MediaTek MT7688 and equipped with 128 MiB
-of DDR and 8 MiB of flash (SPI NOR) and additional 128MiB SPI NAND
-storage.
-
-------------------------------
-Required root node properties:
-- compatible = "gardena,smart-gateway-mt7688", "ralink,mt7688a-soc",
-		"ralink,mt7628a-soc";
diff --git a/Documentation/devicetree/bindings/mips/ralink.yaml b/Documentation/devicetree/bindings/mips/ralink.yaml
new file mode 100644
index 000000000000..704b5b595127
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/ralink.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/ralink.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink SoC based Platforms
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+    Boards with a Ralink SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Boards with Ralink RT2880 SoC
+        items:
+          - enum:
+              - ralink,rt2880-eval-board
+          - const: ralink,rt2880-soc
+
+      - description: Boards with Ralink RT3050 SoC
+        items:
+          - const: ralink,rt3050-soc
+
+      - description: Boards with Ralink RT3052 SoC
+        items:
+          - enum:
+              - ralink,rt3052-eval-board
+          - const: ralink,rt3052-soc
+
+      - description: Boards with Ralink RT3350 SoC
+        items:
+          - const: ralink,rt3350-soc
+
+      - description: Boards with Ralink RT3352 SoC
+        items:
+          - const: ralink,rt3352-soc
+
+      - description: Boards with Ralink RT3383 SoC
+        items:
+          - enum:
+              - ralink,rt3883-eval-board
+          - const: ralink,rt3383-soc
+
+      - description: Boards with Ralink RT5350 SoC
+        items:
+          - const: ralink,rt5350-soc
+
+      - description: Boards with Mediatek/Ralink MT7620A SoC
+        items:
+          - enum:
+              - ralink,mt7620a-eval-board
+          - const: ralink,mt7620a-soc
+
+      - description: Boards with Mediatek/Ralink MT7620N SoC
+        items:
+          - const: ralink,mt7620n-soc
+
+      - description: Boards with Mediatek/Ralink MT7628A SoC
+        items:
+          - enum:
+              - onion,omega2+
+              - vocore,vocore2
+          - const: ralink,mt7628a-soc
+
+      - description: Boards with Mediatek/Ralink MT7688A SoC
+        items:
+          - enum:
+              - gardena,smart-gateway-mt7688
+              - onion,omega2+
+          - const: ralink,mt7628a-soc
+
+      - description: Boards with Mediatek/Ralink MT7621 SoC
+        items:
+          - enum:
+              - gnubee,gb-pc1
+              - gnubee,gb-pc2
+          - const: mediatek,mt7621-soc
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/mips/realtek-rtl.yaml b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
new file mode 100644
index 000000000000..f8ac309d2994
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/realtek-rtl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL83xx/93xx SoC series
+
+maintainers:
+  - Bert Vermeulen <bert@biot.com>
+  - Sander Vanheule <sander@svanheule.net>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      # RTL8382-based boards
+      - items:
+          - enum:
+              - cisco,sg220-26
+          - const: realtek,rtl8382-soc
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
deleted file mode 100644
index a8ebb4621f79..000000000000
--- a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-EEPROMs (SPI) compatible with Microchip Technology 93xx46 family.
-
-Required properties:
-- compatible : shall be one of:
-    "atmel,at93c46d"
-    "eeprom-93xx46"
-- data-size : number of data bits per word (either 8 or 16)
-
-Optional properties:
-- read-only : parameter-less property which disables writes to the EEPROM
-- select-gpios : if present, specifies the GPIO that will be asserted prior to
-  each access to the EEPROM (e.g. for SPI bus multiplexing)
-
-Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
-apply.  In particular, "reg" and "spi-max-frequency" properties must be given.
-
-Example:
-	eeprom@0 {
-		compatible = "eeprom-93xx46";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		spi-cs-high;
-		data-size = <8>;
-		select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.txt b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.txt
deleted file mode 100644
index 1442ba5d2d98..000000000000
--- a/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-DPAA2 console support
-
-Required properties:
-
-    - compatible
-        Value type: <string>
-        Definition: Must be "fsl,dpaa2-console".
-    - reg
-        Value type: <prop-encoded-array>
-        Definition: A standard property.  Specifies the region where the MCFBA
-                    (MC firmware base address) register can be found.
diff --git a/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
new file mode 100644
index 000000000000..8cc951feb7df
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/fsl,dpaa2-console.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DPAA2 console support
+
+maintainers:
+  - Laurentiu Tudor <laurentiu.tudor@nxp.com>
+
+properties:
+  compatible:
+    const: "fsl,dpaa2-console"
+
+  reg:
+    maxItems: 1
+    description: A standard property. Specifies the region where the MCFBA
+                (MC firmware base address) register can be found.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
index 9134e9bcca56..7b486d4985dc 100644
--- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
+++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
@@ -10,7 +10,7 @@ such as network interfaces, crypto accelerator instances, L2 switches,
 etc.
 
 For an overview of the DPAA2 architecture and fsl-mc bus see:
-Documentation/networking/device_drivers/freescale/dpaa2/overview.rst
+Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
 
 As described in the above overview, all DPAA2 objects in a DPRC share the
 same hardware "isolation context" and a 10-bit value called an ICID
@@ -28,6 +28,16 @@ Documentation/devicetree/bindings/iommu/iommu.txt.
 For arm-smmu binding, see:
 Documentation/devicetree/bindings/iommu/arm,smmu.yaml.
 
+The MSI writes are accompanied by sideband data which is derived from the ICID.
+The msi-map property is used to associate the devices with both the ITS
+controller and the sideband data which accompanies the writes.
+
+For generic MSI bindings, see
+Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+For GICv3 and GIC ITS bindings, see:
+Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml.
+
 Required properties:
 
     - compatible
@@ -49,11 +59,6 @@ Required properties:
                         region may not be present in some scenarios, such
                         as in the device tree presented to a virtual machine.
 
-    - msi-parent
-        Value type: <phandle>
-        Definition: Must be present and point to the MSI controller node
-                    handling message interrupts for the MC.
-
     - ranges
         Value type: <prop-encoded-array>
         Definition: A standard property.  Defines the mapping between the child
@@ -119,6 +124,28 @@ Optional properties:
   associated with the listed IOMMU, with the iommu-specifier
   (i - icid-base + iommu-base).
 
+- msi-map: Maps an ICID to a GIC ITS and associated msi-specifier
+  data.
+
+  The property is an arbitrary number of tuples of
+  (icid-base,gic-its,msi-base,length).
+
+  Any ICID in the interval [icid-base, icid-base + length) is
+  associated with the listed GIC ITS, with the msi-specifier
+  (i - icid-base + msi-base).
+
+Deprecated properties:
+
+    - msi-parent
+        Value type: <phandle>
+        Definition: Describes the MSI controller node handling message
+                    interrupts for the MC. When there is no translation
+                    between the ICID and deviceID this property can be used
+                    to describe the MSI controller used by the devices on the
+                    mc-bus.
+                    The use of this property for mc-bus is deprecated. Please
+                    use msi-map.
+
 Example:
 
         smmu: iommu@5000000 {
@@ -128,13 +155,24 @@ Example:
                ...
         };
 
+        gic: interrupt-controller@6000000 {
+               compatible = "arm,gic-v3";
+               ...
+        }
+        its: gic-its@6020000 {
+               compatible = "arm,gic-v3-its";
+               msi-controller;
+               ...
+        };
+
         fsl_mc: fsl-mc@80c000000 {
                 compatible = "fsl,qoriq-mc";
                 reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
                       <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
-                msi-parent = <&its>;
                 /* define map for ICIDs 23-64 */
                 iommu-map = <23 &smmu 23 41>;
+                /* define msi map for ICIDs 23-64 */
+                msi-map = <23 &its 23 41>;
                 #address-cells = <3>;
                 #size-cells = <1>;
 
diff --git a/Documentation/devicetree/bindings/misc/ge-achc.txt b/Documentation/devicetree/bindings/misc/ge-achc.txt
deleted file mode 100644
index 77df94d7a32f..000000000000
--- a/Documentation/devicetree/bindings/misc/ge-achc.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* GE Healthcare USB Management Controller
-
-A device which handles data aquisition from compatible USB based peripherals.
-SPI is used for device management.
-
-Note: This device does not expose the peripherals as USB devices.
-
-Required properties:
-
-- compatible : Should be "ge,achc"
-
-Required SPI properties:
-
-- reg : Should be address of the device chip select within
-  the controller.
-
-- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be
-  1MHz for the GE ACHC.
-
-Example:
-
-spidev0: spi@0 {
-	compatible = "ge,achc";
-	reg = <0>;
-	spi-max-frequency = <1000000>;
-};
diff --git a/Documentation/devicetree/bindings/misc/ge-achc.yaml b/Documentation/devicetree/bindings/misc/ge-achc.yaml
new file mode 100644
index 000000000000..ff07aa62ed57
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/ge-achc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright (C) 2021 GE Inc.
+# Copyright (C) 2021 Collabora Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/ge-achc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GE Healthcare USB Management Controller
+
+description: |
+  A device which handles data acquisition from compatible USB based peripherals.
+  SPI is used for device management.
+
+  Note: This device does not expose the peripherals as USB devices.
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - const: ge,achc
+      - const: nxp,kinetis-k20
+
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Digital power supply regulator on VDD pin
+
+  vdda-supply:
+    description: Analog power supply regulator on VDDA pin
+
+  reg:
+    items:
+      - description: Control interface
+      - description: Firmware programming interface
+
+  reset-gpios:
+    description: GPIO used for hardware reset.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        spi@1 {
+            compatible = "ge,achc", "nxp,kinetis-k20";
+            reg = <1>, <0>;
+            clocks = <&achc_24M>;
+            reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
index 0ea21a6f70b4..38ab0499102d 100644
--- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
+++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
@@ -38,6 +38,8 @@ required:
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt
deleted file mode 100644
index 892ba4384abc..000000000000
--- a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-NVIDIA Tegra186 MISC register block
-
-The MISC register block found on Tegra186 SoCs contains registers that can be
-used to identify a given chip and various strapping options.
-
-Required properties:
-- compatible: Must be:
-  - Tegra186: "nvidia,tegra186-misc"
-- reg: Should contain 2 entries: The first entry gives the physical address
-       and length of the register region which contains revision and debug
-       features. The second entry specifies the physical address and length
-       of the register region indicating the strapping options.
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml
new file mode 100644
index 000000000000..cacb845868f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/nvidia,tegra186-misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) MISC register block
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The MISC register block found on Tegra186 and later SoCs contains
+  registers that can be used to identify a given chip and various strapping
+  options.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-misc
+      - nvidia,tegra194-misc
+      - nvidia,tegra234-misc
+
+  reg:
+    items:
+      - description: physical address and length of the registers which
+          contain revision and debug features
+      - description: physical address and length of the registers which
+          indicate strapping options
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    misc@100000 {
+        compatible = "nvidia,tegra186-misc";
+        reg = <0x00100000 0xf000>,
+              <0x0010f000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
deleted file mode 100644
index 4556359c5876..000000000000
--- a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block
-
-Required properties:
-- compatible : For Tegra20, must be "nvidia,tegra20-apbmisc".  For Tegra30,
-  must be "nvidia,tegra30-apbmisc".  Otherwise, must contain
-  "nvidia,<chip>-apbmisc", plus one of the above, where <chip> is tegra114,
-  tegra124, tegra132.
-- reg: Should contain 2 entries: the first entry gives the physical address
-       and length of the registers which contain revision and debug features.
-       The second entry gives the physical address and length of the
-       registers indicating the strapping options.
-
-Optional properties:
-- nvidia,long-ram-code: If present, the RAM code is long (4 bit). If not, short (2 bit).
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.yaml b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.yaml
new file mode 100644
index 000000000000..6f504fa74007
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/nvidia,tegra20-apbmisc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra APBMISC block
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra210-apbmisc
+              - nvidia,tegra124-apbmisc
+              - nvidia,tegra114-apbmisc
+              - nvidia,tegra30-apbmisc
+          - const: nvidia,tegra20-apbmisc
+
+      - items:
+          - const: nvidia,tegra20-apbmisc
+
+  reg:
+    items:
+      - description: physical address and length of the registers which
+          contain revision and debug features
+      - description: physical address and length of the registers which
+          indicate strapping options
+
+  nvidia,long-ram-code:
+    description: If present, the RAM code is long (4 bit). If not, short
+      (2 bit).
+    type: boolean
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    apbmisc@70000800 {
+        compatible = "nvidia,tegra20-apbmisc";
+        reg = <0x70000800 0x64>, /* Chip revision */
+              <0x70000008 0x04>; /* Strapping options */
+    };
diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
deleted file mode 100644
index 8c4d649cdd8f..000000000000
--- a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-OLPC XO-1.75 Embedded Controller
-
-Required properties:
-- compatible: Should be "olpc,xo1.75-ec".
-- cmd-gpios: gpio specifier of the CMD pin
-
-The embedded controller requires the SPI controller driver to signal readiness
-to receive a transfer (that is, when TX FIFO contains the response data) by
-strobing the ACK pin with the ready signal. See the "ready-gpios" property of the
-SSP binding as documented in:
-<Documentation/devicetree/bindings/spi/spi-pxa2xx.txt>.
-
-Example:
-	&ssp3 {
-		spi-slave;
-		ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
-
-		slave {
-			compatible = "olpc,xo1.75-ec";
-			spi-cpha;
-			cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
new file mode 100644
index 000000000000..b3c45c046ba5
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/olpc,xo1.75-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OLPC XO-1.75 Embedded Controller bindings
+
+description: |
+  This binding describes the Embedded Controller acting as a SPI bus master
+  on a OLPC XO-1.75 laptop computer.
+
+  The embedded controller requires the SPI controller driver to signal
+  readiness to receive a transfer (that is, when TX FIFO contains the
+  response data) by strobing the ACK pin with the ready signal. See the
+  "ready-gpios" property of the SSP binding as documented in:
+  <Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml>.
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  compatible:
+    const: olpc,xo1.75-ec
+
+  cmd-gpios:
+    description: GPIO uspecifier of the CMD pin
+    maxItems: 1
+
+  spi-cpha: true
+
+required:
+  - compatible
+  - cmd-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      spi-slave;
+      #address-cells = <0>;
+      #size-cells = <0>;
+      ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
+
+      slave {
+        compatible = "olpc,xo1.75-ec";
+        spi-cpha;
+        cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt b/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
deleted file mode 100644
index 2a1827ab50d2..000000000000
--- a/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Qualcomm Technologies, Inc. FastRPC Driver
-
-The FastRPC implements an IPC (Inter-Processor Communication)
-mechanism that allows for clients to transparently make remote method
-invocations across DSP and APPS boundaries. This enables developers
-to offload tasks to the DSP and free up the application processor for
-other tasks.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,fastrpc"
-
-- label
-	Usage: required
-	Value type: <string>
-	Definition: should specify the dsp domain name this fastrpc
-	corresponds to. must be one of this: "adsp", "mdsp", "sdsp", "cdsp"
-
-- #address-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 1
-
-- #size-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 0
-
-= COMPUTE BANKS
-Each subnode of the Fastrpc represents compute context banks available
-on the dsp.
-- All Compute context banks MUST contain the following properties:
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,fastrpc-compute-cb"
-
-- reg
-	Usage: required
-	Value type: <u32>
-	Definition: Context Bank ID.
-
-- qcom,nsessions:
-	Usage: Optional
-	Value type: <u32>
-	Defination: A value indicating how many sessions can share this
-		    context bank. Defaults to 1 when this property
-		    is not specified.
-
-Example:
-
-adsp-pil {
-	compatible = "qcom,msm8996-adsp-pil";
-	...
-	smd-edge {
-		label = "lpass";
-		fastrpc {
-			compatible = "qcom,fastrpc";
-			qcom,smd-channels = "fastrpcsmd-apps-dsp";
-			label = "adsp";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cb@1 {
-				compatible = "qcom,fastrpc-compute-cb";
-				reg = <1>;
-			};
-
-			cb@2 {
-				compatible = "qcom,fastrpc-compute-cb";
-				reg = <2>;
-			};
-			...
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
new file mode 100644
index 000000000000..d7576f8ac94b
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/qcom,fastrpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm FastRPC Driver
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  The FastRPC implements an IPC (Inter-Processor Communication)
+  mechanism that allows for clients to transparently make remote method
+  invocations across DSP and APPS boundaries. This enables developers
+  to offload tasks to the DSP and free up the application processor for
+  other tasks.
+
+properties:
+  compatible:
+    const: qcom,fastrpc
+
+  label:
+    enum:
+      - adsp
+      - mdsp
+      - sdsp
+      - cdsp
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for remote heap CMA.
+
+  qcom,glink-channels:
+    description:
+      A list of channels tied to this function, used for matching
+      the function to a set of virtual channels.
+    $ref: "/schemas/types.yaml#/definitions/string-array"
+    items:
+      - const: fastrpcglink-apps-dsp
+
+  qcom,non-secure-domain:
+    description:
+      Used to mark the current domain as non-secure.
+    type: boolean
+
+  qcom,smd-channels:
+    description:
+      Channel name used for the RPM communication
+    $ref: "/schemas/types.yaml#/definitions/string-array"
+    items:
+      - const: fastrpcsmd-apps-dsp
+
+  qcom,vmids:
+    description:
+      Virtual machine IDs for remote processor.
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "(compute-)?cb@[0-9]*$":
+    type: object
+
+    description: >
+      Each subnode of the Fastrpc represents compute context banks available on the dsp.
+
+    properties:
+      compatible:
+        const: qcom,fastrpc-compute-cb
+
+      reg:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 2
+
+      qcom,nsessions:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 1
+        description: >
+          A value indicating how many sessions can share this context bank.
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - label
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    glink-edge {
+        interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                     IPCC_MPROC_SIGNAL_GLINK_QMP
+                                     IRQ_TYPE_EDGE_RISING>;
+        mboxes = <&ipcc IPCC_CLIENT_LPASS
+                        IPCC_MPROC_SIGNAL_GLINK_QMP>;
+        label = "lpass";
+        qcom,remote-pid = <2>;
+
+        fastrpc {
+            compatible = "qcom,fastrpc";
+            qcom,glink-channels = "fastrpcglink-apps-dsp";
+            label = "sdsp";
+            qcom,non-secure-domain;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compute-cb@1 {
+                compatible = "qcom,fastrpc-compute-cb";
+                reg = <1>;
+                iommus = <&apps_smmu 0x0541 0x0>;
+            };
+
+            compute-cb@2 {
+                compatible = "qcom,fastrpc-compute-cb";
+                reg = <2>;
+                iommus = <&apps_smmu 0x0542 0x0>;
+            };
+
+            compute-cb@3 {
+                compatible = "qcom,fastrpc-compute-cb";
+                reg = <3>;
+                iommus = <&apps_smmu 0x0543 0x0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml
new file mode 100644
index 000000000000..1aebeb696ee0
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/qemu,vcpu-stall-detector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VCPU stall detector
+
+description:
+  This binding describes a CPU stall detector mechanism for virtual CPUs
+  which is accessed through MMIO.
+
+maintainers:
+  - Sebastian Ene <sebastianene@google.com>
+
+properties:
+  compatible:
+    enum:
+      - qemu,vcpu-stall-detector
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The internal clock of the stall detector peripheral measure in Hz used
+      to decrement its internal counter register on each tick.
+      Defaults to 10 if unset.
+    default: 10
+
+  timeout-sec:
+    description: |
+      The stall detector expiration timeout measured in seconds.
+      Defaults to 8 if unset. Please note that it also takes into account the
+      time spent while the VCPU is not running.
+    default: 8
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    vmwdt@9030000 {
+      compatible = "qemu,vcpu-stall-detector";
+      reg = <0x9030000 0x10000>;
+      clock-frequency = <10>;
+      timeout-sec = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
index e82c9a07b6fb..02ecc93417ef 100644
--- a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/allwinner,sun4i-a10-mmc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 MMC Controller Device Tree Bindings
+title: Allwinner A10 MMC Controller
 
 allOf:
   - $ref: "mmc-controller.yaml"
@@ -24,8 +24,11 @@ properties:
       - const: allwinner,sun7i-a20-mmc
       - const: allwinner,sun8i-a83t-emmc
       - const: allwinner,sun9i-a80-mmc
+      - const: allwinner,sun20i-d1-mmc
       - const: allwinner,sun50i-a64-emmc
       - const: allwinner,sun50i-a64-mmc
+      - const: allwinner,sun50i-a100-emmc
+      - const: allwinner,sun50i-a100-mmc
       - items:
           - const: allwinner,sun8i-a83t-mmc
           - const: allwinner,sun7i-a20-mmc
@@ -47,6 +50,18 @@ properties:
       - items:
           - const: allwinner,sun50i-h6-mmc
           - const: allwinner,sun50i-a64-mmc
+      - items:
+          - const: allwinner,sun20i-d1-emmc
+          - const: allwinner,sun50i-a100-emmc
+      - items:
+          - const: allwinner,sun50i-h616-emmc
+          - const: allwinner,sun50i-a100-emmc
+      - items:
+          - const: allwinner,sun50i-h616-mmc
+          - const: allwinner,sun50i-a100-mmc
+      - items:
+          - const: allwinner,suniv-f1c100s-mmc
+          - const: allwinner,sun7i-a20-mmc
 
   reg:
     maxItems: 1
@@ -56,7 +71,6 @@ properties:
 
   clocks:
     minItems: 2
-    maxItems: 4
     items:
       - description: Bus Clock
       - description: Module Clock
@@ -65,7 +79,6 @@ properties:
 
   clock-names:
     minItems: 2
-    maxItems: 4
     items:
       - const: ahb
       - const: mmc
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
new file mode 100644
index 000000000000..1c391bec43dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/amlogic,meson-mx-sdhc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SDHC controller
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+  The SDHC MMC host controller on Amlogic SoCs provides an eMMC and MMC
+  card interface with 1/4/8-bit bus width.
+  It supports eMMC spec 4.4x/4.5x including HS200 (up to 100MHz clock).
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson8-sdhc
+          - amlogic,meson8b-sdhc
+          - amlogic,meson8m2-sdhc
+      - const: amlogic,meson-mx-sdhc
+
+  reg:
+    minItems: 1
+
+  interrupts:
+    minItems: 1
+
+  clocks:
+    minItems: 5
+
+  clock-names:
+    items:
+      - const: clkin0
+      - const: clkin1
+      - const: clkin2
+      - const: clkin3
+      - const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sdhc: mmc@8e00 {
+      compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+      reg = <0x8e00 0x42>;
+      interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&xtal>,
+               <&fclk_div4>,
+               <&fclk_div3>,
+               <&fclk_div5>,
+               <&sdhc_pclk>;
+      clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
deleted file mode 100644
index 428685eb2ded..000000000000
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-Device Tree Bindings for the Arasan SDHCI Controller
-
-  The bindings follow the mmc[1], clock[2], interrupt[3] and phy[4] bindings.
-  Only deviations are documented here.
-
-  [1] Documentation/devicetree/bindings/mmc/mmc.txt
-  [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
-  [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-  [4] Documentation/devicetree/bindings/phy/phy-bindings.txt
-
-Required Properties:
-  - compatible: Compatibility string.  One of:
-    - "arasan,sdhci-8.9a": generic Arasan SDHCI 8.9a PHY
-    - "arasan,sdhci-4.9a": generic Arasan SDHCI 4.9a PHY
-    - "arasan,sdhci-5.1": generic Arasan SDHCI 5.1 PHY
-    - "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1": rk3399 eMMC PHY
-      For this device it is strongly suggested to include arasan,soc-ctl-syscon.
-    - "xlnx,zynqmp-8.9a": ZynqMP SDHCI 8.9a PHY
-      For this device it is strongly suggested to include clock-output-names and
-      #clock-cells.
-    - "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY
-	Note: This binding has been deprecated and moved to [5].
-    - "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1": Intel LGM eMMC PHY
-      For this device it is strongly suggested to include arasan,soc-ctl-syscon.
-    - "intel,lgm-sdhci-5.1-sdxc", "arasan,sdhci-5.1": Intel LGM SDXC PHY
-      For this device it is strongly suggested to include arasan,soc-ctl-syscon.
-
-  [5] Documentation/devicetree/bindings/mmc/sdhci-am654.txt
-
-  - reg: From mmc bindings: Register location and length.
-  - clocks: From clock bindings: Handles to clock inputs.
-  - clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb"
-  - interrupts: Interrupt specifier
-
-Required Properties for "arasan,sdhci-5.1":
-  - phys: From PHY bindings: Phandle for the Generic PHY for arasan.
-  - phy-names:  MUST be "phy_arasan".
-
-Optional Properties:
-  - arasan,soc-ctl-syscon: A phandle to a syscon device (see ../mfd/syscon.txt)
-    used to access core corecfg registers.  Offsets of registers in this
-    syscon are determined based on the main compatible string for the device.
-  - clock-output-names: If specified, this will be the name of the card clock
-    which will be exposed by this device.  Required if #clock-cells is
-    specified.
-  - #clock-cells: If specified this should be the value <0> or <1>. With this
-    property in place we will export one or two clocks representing the Card
-    Clock. These clocks are expected to be consumed by our PHY.
-  - xlnx,fails-without-test-cd: when present, the controller doesn't work when
-    the CD line is not connected properly, and the line is not connected
-    properly. Test mode can be used to force the controller to function.
-  - xlnx,int-clock-stable-broken: when present, the controller always reports
-    that the internal clock is stable even when it is not.
-
-  - xlnx,mio-bank: When specified, this will indicate the MIO bank number in
-    which the command and data lines are configured. If not specified, driver
-    will assume this as 0.
-
-Example:
-	sdhci@e0100000 {
-		compatible = "arasan,sdhci-8.9a";
-		reg = <0xe0100000 0x1000>;
-		clock-names = "clk_xin", "clk_ahb";
-		clocks = <&clkc 21>, <&clkc 32>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 24 4>;
-	} ;
-
-	sdhci@e2800000 {
-		compatible = "arasan,sdhci-5.1";
-		reg = <0xe2800000 0x1000>;
-		clock-names = "clk_xin", "clk_ahb";
-		clocks = <&cru 8>, <&cru 18>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 24 4>;
-		phys = <&emmc_phy>;
-		phy-names = "phy_arasan";
-	} ;
-
-	sdhci: sdhci@fe330000 {
-		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
-		reg = <0x0 0xfe330000 0x0 0x10000>;
-		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
-		clock-names = "clk_xin", "clk_ahb";
-		arasan,soc-ctl-syscon = <&grf>;
-		assigned-clocks = <&cru SCLK_EMMC>;
-		assigned-clock-rates = <200000000>;
-		clock-output-names = "emmc_cardclock";
-		phys = <&emmc_phy>;
-		phy-names = "phy_arasan";
-		#clock-cells = <0>;
-	};
-
-	sdhci: mmc@ff160000 {
-		compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
-		interrupt-parent = <&gic>;
-		interrupts = <0 48 4>;
-		reg = <0x0 0xff160000 0x0 0x1000>;
-		clocks = <&clk200>, <&clk200>;
-		clock-names = "clk_xin", "clk_ahb";
-		clock-output-names = "clk_out_sd0", "clk_in_sd0";
-		#clock-cells = <1>;
-		clk-phase-sd-hs = <63>, <72>;
-	};
-
-	emmc: sdhci@ec700000 {
-		compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1";
-		reg = <0xec700000 0x300>;
-		interrupt-parent = <&ioapic1>;
-		interrupts = <44 1>;
-		clocks = <&cgu0 LGM_CLK_EMMC5>, <&cgu0 LGM_CLK_NGI>,
-			 <&cgu0 LGM_GCLK_EMMC>;
-		clock-names = "clk_xin", "clk_ahb", "gate";
-		clock-output-names = "emmc_cardclock";
-		#clock-cells = <0>;
-		phys = <&emmc_phy>;
-		phy-names = "phy_arasan";
-		arasan,soc-ctl-syscon = <&sysconf>;
-	};
-
-	sdxc: sdhci@ec600000 {
-		compatible = "arasan,sdhci-5.1", "intel,lgm-sdhci-5.1-sdxc";
-		reg = <0xec600000 0x300>;
-		interrupt-parent = <&ioapic1>;
-		interrupts = <43 1>;
-		clocks = <&cgu0 LGM_CLK_SDIO>, <&cgu0 LGM_CLK_NGI>,
-			 <&cgu0 LGM_GCLK_SDXC>;
-		clock-names = "clk_xin", "clk_ahb", "gate";
-		clock-output-names = "sdxc_cardclock";
-		#clock-cells = <0>;
-		phys = <&sdxc_phy>;
-		phy-names = "phy_arasan";
-		arasan,soc-ctl-syscon = <&sysconf>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
new file mode 100644
index 000000000000..83be9e93d221
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
@@ -0,0 +1,330 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mmc/arasan,sdhci.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device Tree Bindings for the Arasan SDHCI Controller
+
+maintainers:
+  - Adrian Hunter <adrian.hunter@intel.com>
+
+allOf:
+  - $ref: "mmc-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arasan,sdhci-5.1
+    then:
+      required:
+        - phys
+        - phy-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynqmp-8.9a
+              - xlnx,versal-8.9a
+    then:
+      properties:
+        clock-output-names:
+          oneOf:
+            - items:
+                - const: clk_out_sd0
+                - const: clk_in_sd0
+            - items:
+                - const: clk_out_sd1
+                - const: clk_in_sd1
+
+properties:
+  compatible:
+    oneOf:
+      - const: arasan,sdhci-8.9a                # generic Arasan SDHCI 8.9a PHY
+      - const: arasan,sdhci-4.9a                # generic Arasan SDHCI 4.9a PHY
+      - const: arasan,sdhci-5.1                 # generic Arasan SDHCI 5.1 PHY
+      - items:
+          - const: rockchip,rk3399-sdhci-5.1    # rk3399 eMMC PHY
+          - const: arasan,sdhci-5.1
+        description:
+          For this device it is strongly suggested to include
+          arasan,soc-ctl-syscon.
+      - items:
+          - const: xlnx,zynqmp-8.9a             # ZynqMP SDHCI 8.9a PHY
+          - const: arasan,sdhci-8.9a
+        description:
+          For this device it is strongly suggested to include
+          clock-output-names and '#clock-cells'.
+      - items:
+          - const: xlnx,versal-8.9a             # Versal SDHCI 8.9a PHY
+          - const: arasan,sdhci-8.9a
+        description:
+          For this device it is strongly suggested to include
+          clock-output-names and '#clock-cells'.
+      - items:
+          - const: intel,lgm-sdhci-5.1-emmc     # Intel LGM eMMC PHY
+          - const: arasan,sdhci-5.1
+        description:
+          For this device it is strongly suggested to include
+          arasan,soc-ctl-syscon.
+      - items:
+          - const: intel,lgm-sdhci-5.1-sdxc     # Intel LGM SDXC PHY
+          - const: arasan,sdhci-5.1
+        description:
+          For this device it is strongly suggested to include
+          arasan,soc-ctl-syscon.
+      - items:
+          - const: intel,keembay-sdhci-5.1-emmc # Intel Keem Bay eMMC PHY
+          - const: arasan,sdhci-5.1
+        description:
+          For this device it is strongly suggested to include
+          arasan,soc-ctl-syscon.
+      - const: intel,keembay-sdhci-5.1-sd       # Intel Keem Bay SD controller
+        description:
+          For this device it is strongly suggested to include
+          arasan,soc-ctl-syscon.
+      - const: intel,keembay-sdhci-5.1-sdio     # Intel Keem Bay SDIO controller
+        description:
+          For this device it is strongly suggested to include
+          arasan,soc-ctl-syscon.
+      - items:
+          - const: intel,thunderbay-sdhci-5.1   # Intel Thunder Bay eMMC PHY
+          - const: arasan,sdhci-5.1
+        description:
+          For this device it is strongly suggested to include
+          clock-output-names and '#clock-cells'.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: clk_xin
+      - const: clk_ahb
+      - const: gate
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: phy_arasan
+
+  resets:
+    maxItems: 1
+
+  arasan,soc-ctl-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle to a syscon device (see ../mfd/syscon.txt) used to access
+      core corecfg registers. Offsets of registers in this syscon are
+      determined based on the main compatible string for the device.
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 2
+    description:
+      Name of the card clock which will be exposed by this device.
+
+  '#clock-cells':
+    enum: [0, 1]
+    description:
+      With this property in place we will export one or two clocks
+      representing the Card Clock. These clocks are expected to be
+      consumed by our PHY.
+
+  xlnx,fails-without-test-cd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When present, the controller doesn't work when the CD line is not
+      connected properly, and the line is not connected properly.
+      Test mode can be used to force the controller to function.
+
+  xlnx,int-clock-stable-broken:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When present, the controller always reports that the internal clock
+      is stable even when it is not.
+
+  xlnx,mio-bank:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    default: 0
+    description:
+      The MIO bank number in which the command and data lines are configured.
+
+dependencies:
+  '#clock-cells': [ clock-output-names ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@e0100000 {
+          compatible = "arasan,sdhci-8.9a";
+          reg = <0xe0100000 0x1000>;
+          clock-names = "clk_xin", "clk_ahb";
+          clocks = <&clkc 21>, <&clkc 32>;
+          interrupt-parent = <&gic>;
+          interrupts = <0 24 4>;
+    };
+
+  - |
+    mmc@e2800000 {
+          compatible = "arasan,sdhci-5.1";
+          reg = <0xe2800000 0x1000>;
+          clock-names = "clk_xin", "clk_ahb";
+          clocks = <&cru 8>, <&cru 18>;
+          interrupt-parent = <&gic>;
+          interrupts = <0 24 4>;
+          phys = <&emmc_phy>;
+          phy-names = "phy_arasan";
+    };
+
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    mmc@fe330000 {
+          compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+          reg = <0xfe330000 0x10000>;
+          interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+          clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+          clock-names = "clk_xin", "clk_ahb";
+          arasan,soc-ctl-syscon = <&grf>;
+          assigned-clocks = <&cru SCLK_EMMC>;
+          assigned-clock-rates = <200000000>;
+          clock-output-names = "emmc_cardclock";
+          phys = <&emmc_phy>;
+          phy-names = "phy_arasan";
+          #clock-cells = <0>;
+    };
+
+  - |
+    mmc@ff160000 {
+          compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
+          interrupt-parent = <&gic>;
+          interrupts = <0 48 4>;
+          reg = <0xff160000 0x1000>;
+          clocks = <&clk200>, <&clk200>;
+          clock-names = "clk_xin", "clk_ahb";
+          clock-output-names = "clk_out_sd0", "clk_in_sd0";
+          #clock-cells = <1>;
+          clk-phase-sd-hs = <63>, <72>;
+    };
+
+  - |
+    mmc@f1040000 {
+          compatible = "xlnx,versal-8.9a", "arasan,sdhci-8.9a";
+          interrupt-parent = <&gic>;
+          interrupts = <0 126 4>;
+          reg = <0xf1040000 0x10000>;
+          clocks = <&clk200>, <&clk200>;
+          clock-names = "clk_xin", "clk_ahb";
+          clock-output-names = "clk_out_sd0", "clk_in_sd0";
+          #clock-cells = <1>;
+          clk-phase-sd-hs = <132>, <60>;
+    };
+
+  - |
+    #define LGM_CLK_EMMC5
+    #define LGM_CLK_NGI
+    #define LGM_GCLK_EMMC
+    mmc@ec700000 {
+          compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1";
+          reg = <0xec700000 0x300>;
+          interrupt-parent = <&ioapic1>;
+          interrupts = <44 1>;
+          clocks = <&cgu0 LGM_CLK_EMMC5>, <&cgu0 LGM_CLK_NGI>,
+                   <&cgu0 LGM_GCLK_EMMC>;
+          clock-names = "clk_xin", "clk_ahb", "gate";
+          clock-output-names = "emmc_cardclock";
+          #clock-cells = <0>;
+          phys = <&emmc_phy>;
+          phy-names = "phy_arasan";
+          arasan,soc-ctl-syscon = <&sysconf>;
+    };
+
+  - |
+    #define LGM_CLK_SDIO
+    #define LGM_GCLK_SDXC
+    mmc@ec600000 {
+          compatible = "intel,lgm-sdhci-5.1-sdxc", "arasan,sdhci-5.1";
+          reg = <0xec600000 0x300>;
+          interrupt-parent = <&ioapic1>;
+          interrupts = <43 1>;
+          clocks = <&cgu0 LGM_CLK_SDIO>, <&cgu0 LGM_CLK_NGI>,
+                   <&cgu0 LGM_GCLK_SDXC>;
+          clock-names = "clk_xin", "clk_ahb", "gate";
+          clock-output-names = "sdxc_cardclock";
+          #clock-cells = <0>;
+          phys = <&sdxc_phy>;
+          phy-names = "phy_arasan";
+          arasan,soc-ctl-syscon = <&sysconf>;
+    };
+
+  - |
+    #define KEEM_BAY_PSS_AUX_EMMC
+    #define KEEM_BAY_PSS_EMMC
+    mmc@33000000 {
+          compatible = "intel,keembay-sdhci-5.1-emmc", "arasan,sdhci-5.1";
+          interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+          reg = <0x33000000 0x300>;
+          clock-names = "clk_xin", "clk_ahb";
+          clocks = <&scmi_clk KEEM_BAY_PSS_AUX_EMMC>,
+                   <&scmi_clk KEEM_BAY_PSS_EMMC>;
+          phys = <&emmc_phy>;
+          phy-names = "phy_arasan";
+          assigned-clocks = <&scmi_clk KEEM_BAY_PSS_AUX_EMMC>;
+          assigned-clock-rates = <200000000>;
+          clock-output-names = "emmc_cardclock";
+          #clock-cells = <0>;
+          arasan,soc-ctl-syscon = <&mmc_phy_syscon>;
+    };
+
+  - |
+    #define KEEM_BAY_PSS_AUX_SD0
+    #define KEEM_BAY_PSS_SD0
+    mmc@31000000 {
+          compatible = "intel,keembay-sdhci-5.1-sd";
+          interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+          reg = <0x31000000 0x300>;
+          clock-names = "clk_xin", "clk_ahb";
+          clocks = <&scmi_clk KEEM_BAY_PSS_AUX_SD0>,
+                   <&scmi_clk KEEM_BAY_PSS_SD0>;
+          arasan,soc-ctl-syscon = <&sd0_phy_syscon>;
+    };
+
+  - |
+    #define EMMC_XIN_CLK
+    #define EMMC_AXI_CLK
+    #define TBH_PSS_EMMC_RST_N
+    mmc@80420000 {
+          compatible = "intel,thunderbay-sdhci-5.1", "arasan,sdhci-5.1";
+          interrupts = <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>;
+          reg = <0x80420000 0x400>;
+          clocks = <&scmi_clk EMMC_XIN_CLK>,
+                   <&scmi_clk EMMC_AXI_CLK>;
+          clock-names = "clk_xin", "clk_ahb";
+          phys = <&emmc_phy>;
+          phy-names = "phy_arasan";
+          assigned-clocks = <&scmi_clk EMMC_XIN_CLK>;
+          clock-output-names = "emmc_cardclock";
+          resets = <&rst_pss1 TBH_PSS_EMMC_RST_N>;
+          #clock-cells = <0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
new file mode 100644
index 000000000000..1e69a5a42439
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -0,0 +1,244 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/arm,pl18x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCell MultiMedia Card Interface (MMCI) PL180 and PL181
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+  The ARM PrimeCells MMCI PL180 and PL181 provides an interface for
+  reading and writing to MultiMedia and SD cards alike. Over the years
+  vendors have use the VHDL code from ARM to create derivative MMC/SD/SDIO
+  host controllers with very similar characteristics.
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+  - $ref: mmc-controller.yaml#
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl180
+          - arm,pl181
+          - arm,pl18x
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: The first version of the block, simply called
+          PL180 and found in the ARM Integrator IM/PD1 logic module.
+        items:
+          - const: arm,pl180
+          - const: arm,primecell
+      - description: The improved version of the block, found in the
+          ARM Versatile and later reference designs. Further revisions
+          exist but get detected at runtime by reading some magic numbers
+          in the PrimeCell ID registers.
+        items:
+          - const: arm,pl181
+          - const: arm,primecell
+      - description: Wildcard entry that will let the operating system
+          inspect the PrimeCell ID registers to determine which hardware
+          variant of PL180 or PL181 this is.
+        items:
+          - const: arm,pl18x
+          - const: arm,primecell
+      - description: Entry for STMicroelectronics variant of PL18x.
+          This dedicated compatible is used by bootloaders.
+        items:
+          - const: st,stm32-sdmmc2
+          - const: arm,pl18x
+          - const: arm,primecell
+
+  clocks:
+    description: One or two clocks, the "apb_pclk" and the "MCLK"
+      which is the core block clock. The names are not compulsory.
+    minItems: 1
+    maxItems: 2
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+      - items:
+          - const: rx
+          - const: tx
+
+  power-domains: true
+
+  resets:
+    maxItems: 1
+
+  reg:
+    description: the MMIO memory window must be exactly 4KB (0x1000) and the
+      layout should provide the PrimeCell ID registers so that the device can
+      be discovered. On ST Micro variants, a second register window may be
+      defined if a delay block is present and used for tuning.
+
+  interrupts:
+    description: The first interrupt is the command interrupt and corresponds
+      to the event at the end of a command. The second interrupt is the
+      PIO (polled I/O) interrupt and occurs when the FIFO needs to be
+      emptied as part of a bulk read from the card. Some variants have these
+      two interrupts wired into the same line (logic OR) and in that case
+      only one interrupt may be provided.
+    minItems: 1
+    maxItems: 2
+
+  st,sig-dir-dat0:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, bus signal direction pins used for
+      DAT[0].
+
+  st,sig-dir-dat2:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, bus signal direction pins used for
+      DAT[2].
+
+  st,sig-dir-dat31:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, bus signal direction pins used for
+      DAT[3] and DAT[1].
+
+  st,sig-dir-dat74:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, bus signal direction pins used for
+      DAT[7] and DAT[4].
+
+  st,sig-dir-cmd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, CMD signal direction used for
+      pin CMD.
+
+  st,sig-pin-fbclk:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, feedback clock FBCLK signal pin
+      in use.
+
+  st,sig-dir:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, signal direction polarity used for
+      pins CMD, DAT[0], DAT[1], DAT[2] and DAT[3].
+
+  st,neg-edge:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, data and command phase relation,
+      generated on the sd clock falling edge.
+
+  st,use-ckin:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, use CKIN pin from an external
+      driver to sample the receive data (for example with a voltage switch
+      transceiver).
+
+  st,cmd-gpios:
+    maxItems: 1
+    description:
+      The GPIO matching the CMD pin.
+
+  st,ck-gpios:
+    maxItems: 1
+    description:
+      The GPIO matching the CK pin.
+
+  st,ckin-gpios:
+    maxItems: 1
+    description:
+      The GPIO matching the CKIN pin.
+
+dependencies:
+  st,cmd-gpios: [ "st,use-ckin" ]
+  st,ck-gpios: [ "st,use-ckin" ]
+  st,ckin-gpios: [ "st,use-ckin" ]
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    mmc@5000 {
+      compatible = "arm,pl180", "arm,primecell";
+      reg = <0x5000 0x1000>;
+      interrupts-extended = <&vic 22 &sic 1>;
+      clocks = <&xtal24mhz>, <&pclk>;
+      clock-names = "mclk", "apb_pclk";
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@80126000 {
+      compatible = "arm,pl18x", "arm,primecell";
+      reg = <0x80126000 0x1000>;
+      interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+      dmas = <&dma 29 0 0x2>, <&dma 29 0 0x0>;
+      dma-names = "rx", "tx";
+      clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+      clock-names = "sdi", "apb_pclk";
+      max-frequency = <100000000>;
+      bus-width = <4>;
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      cd-gpios  = <&gpio2 31 0x4>;
+      st,sig-dir-dat0;
+      st,sig-dir-dat2;
+      st,sig-dir-cmd;
+      st,sig-pin-fbclk;
+      vmmc-supply = <&ab8500_ldo_aux3_reg>;
+      vqmmc-supply = <&vmmci>;
+    };
+
+  - |
+    mmc@101f6000 {
+      compatible = "arm,pl18x", "arm,primecell";
+      reg = <0x101f6000 0x1000>;
+      clocks = <&sdiclk>, <&pclksdi>;
+      clock-names = "mclk", "apb_pclk";
+      interrupts = <22>;
+      max-frequency = <400000>;
+      bus-width = <4>;
+      cap-mmc-highspeed;
+      cap-sd-highspeed;
+      full-pwr-cycle;
+      st,sig-dir-dat0;
+      st,sig-dir-dat2;
+      st,sig-dir-dat31;
+      st,sig-dir-cmd;
+      st,sig-pin-fbclk;
+      vmmc-supply = <&vmmc_regulator>;
+    };
+
+  - |
+    mmc@52007000 {
+      compatible = "arm,pl18x", "arm,primecell";
+      arm,primecell-periphid = <0x10153180>;
+      reg = <0x52007000 0x1000>;
+      interrupts = <49>;
+      clocks = <&rcc 0>;
+      clock-names = "apb_pclk";
+      resets = <&rcc 1>;
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      max-frequency = <120000000>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
index 200de9396036..987b287f3bff 100644
--- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -41,8 +41,8 @@ properties:
 patternProperties:
   "^sdhci@[0-9a-f]+$":
     type: object
-    allOf:
-        - $ref: mmc-controller.yaml
+    $ref: mmc-controller.yaml
+
     properties:
       compatible:
         enum:
diff --git a/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
new file mode 100644
index 000000000000..2f63f2cdeb71
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,iproc-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom IPROC SDHCI controller
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-sdhci
+      - brcm,bcm2711-emmc2
+      - brcm,sdhci-iproc-cygnus
+      - brcm,sdhci-iproc
+      - brcm,bcm7211a0-sdhci
+
+  reg:
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Handle to core clock for the sdhci controller.
+
+  sdhci,auto-cmd12:
+    type: boolean
+    description: Specifies that controller should use auto CMD12
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/bcm-cygnus.h>
+
+    mmc@18041000 {
+      compatible = "brcm,sdhci-iproc-cygnus";
+      reg = <0x18041000 0x100>;
+      interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+      bus-width = <4>;
+      sdhci,auto-cmd12;
+      no-1-8-v;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
deleted file mode 100644
index ae2074184528..000000000000
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* BROADCOM BRCMSTB/BMIPS SDHCI Controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-brcmstb driver.
-
-NOTE: The driver disables all UHS speed modes by default and depends
-on Device Tree properties to enable them for SoC/Board combinations
-that support them.
-
-Required properties:
-- compatible: should be one of the following
-  - "brcm,bcm7425-sdhci"
-  - "brcm,bcm7445-sdhci"
-  - "brcm,bcm7216-sdhci"
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
-
-	sdhci@84b0000 {
-		sd-uhs-sdr50;
-		sd-uhs-ddr50;
-		sd-uhs-sdr104;
-		sdhci,auto-cmd12;
-		compatible = "brcm,bcm7216-sdhci",
-			   "brcm,bcm7445-sdhci",
-			   "brcm,sdhci-brcmstb";
-		reg = <0x84b0000 0x260 0x84b0300 0x200>;
-		reg-names = "host", "cfg";
-		interrupts = <0x0 0x26 0x4>;
-		interrupt-names = "sdio0_0";
-		clocks = <&scmi_clk 245>;
-		clock-names = "sw_sdio";
-	};
-
-	sdhci@84b1000 {
-		mmc-ddr-1_8v;
-		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
-		mmc-hs400-enhanced-strobe;
-		supports-cqe;
-		non-removable;
-		bus-width = <0x8>;
-		compatible = "brcm,bcm7216-sdhci",
-			   "brcm,bcm7445-sdhci",
-			   "brcm,sdhci-brcmstb";
-		reg = <0x84b1000 0x260 0x84b1300 0x200>;
-		reg-names = "host", "cfg";
-		interrupts = <0x0 0x27 0x4>;
-		interrupt-names = "sdio1_0";
-		clocks = <&scmi_clk 245>;
-		clock-names = "sw_sdio";
-	};
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
new file mode 100644
index 000000000000..dead421e17d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,sdhci-brcmstb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BRCMSTB/BMIPS SDHCI Controller binding
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-sdhci
+          - const: brcm,bcm7445-sdhci
+          - const: brcm,sdhci-brcmstb
+      - items:
+          - enum:
+              - brcm,bcm7445-sdhci
+          - const: brcm,sdhci-brcmstb
+      - items:
+          - enum:
+              - brcm,bcm7425-sdhci
+          - const: brcm,sdhci-brcmstb
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: host
+      - const: cfg
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: handle to core clock for the sdhci controller
+      - description: handle to improved 150Mhz clock for sdhci controller (Optional clock)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sw_sdio
+      - const: sdio_freq # Optional clock
+
+  clock-frequency:
+    description:
+      Maximum operating frequency of sdio_freq sdhci controller clock
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000000
+    maximum: 150000000
+
+  sdhci,auto-cmd12:
+    type: boolean
+    description: Specifies that controller should use auto CMD12
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        clock-names:
+          contains:
+            const: sdio_freq
+
+    then:
+      required:
+        - clock-frequency
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@84b0000 {
+      compatible = "brcm,bcm7216-sdhci",
+                   "brcm,bcm7445-sdhci",
+                   "brcm,sdhci-brcmstb";
+      reg = <0x84b0000 0x260>, <0x84b0300 0x200>;
+      reg-names = "host", "cfg";
+      sd-uhs-sdr50;
+      sd-uhs-ddr50;
+      sd-uhs-sdr104;
+      sdhci,auto-cmd12;
+      interrupts = <0x0 0x26 0x4>;
+      clocks = <&scmi_clk 245>;
+      clock-names = "sw_sdio";
+    };
+
+    mmc@84b1000 {
+      compatible = "brcm,bcm7216-sdhci",
+                   "brcm,bcm7445-sdhci",
+                   "brcm,sdhci-brcmstb";
+      reg = <0x84b1000 0x260>, <0x84b1300 0x200>;
+      reg-names = "host", "cfg";
+      mmc-ddr-1_8v;
+      mmc-hs200-1_8v;
+      mmc-hs400-1_8v;
+      mmc-hs400-enhanced-strobe;
+      supports-cqe;
+      non-removable;
+      bus-width = <0x8>;
+      interrupts = <0x0 0x27 0x4>;
+      clocks = <&scmi_clk 245>;
+      clock-names = "sw_sdio";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
deleted file mode 100644
index 09d87cc1182a..000000000000
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Broadcom IPROC SDHCI controller
-
-This file documents differences between the core properties described
-by mmc.txt and the properties that represent the IPROC SDHCI controller.
-
-Required properties:
-- compatible : Should be one of the following
-	       "brcm,bcm2835-sdhci"
-	       "brcm,bcm2711-emmc2"
-	       "brcm,sdhci-iproc-cygnus"
-	       "brcm,sdhci-iproc"
-
-Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and
-bcm2711-emmc2 for the additional eMMC2 controller on BCM2711.
-
-Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers
-restricted to 32bit host accesses to SDHCI registers.
-
-Use sdhci-iproc for Broadcom SDHCI Controllers that allow standard
-8, 16, 32-bit host access to SDHCI register.
-
-- clocks : The clock feeding the SDHCI controller.
-
-Optional properties:
-  - sdhci,auto-cmd12: specifies that controller should use auto CMD12.
-
-Example:
-
-sdhci0: sdhci@18041000 {
-	compatible = "brcm,sdhci-iproc-cygnus";
-	reg = <0x18041000 0x100>;
-	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
-	bus-width = <4>;
-	sdhci,auto-cmd12;
-	no-1-8-v;
-};
diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
new file mode 100644
index 000000000000..8b1a0fdcb5e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/cdns,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence SD/SDIO/eMMC Host Controller (SD4HC)
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - microchip,mpfs-sd4hc
+          - socionext,uniphier-sd4hc
+      - const: cdns,sd4hc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  # PHY DLL input delays:
+  # They are used to delay the data valid window, and align the window to
+  # sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
+  # and it is increased by 2.5ns in each step.
+
+  cdns,phy-input-delay-sd-highspeed:
+    description: Value of the delay in the input path for SD high-speed timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-legacy:
+    description: Value of the delay in the input path for legacy timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-sd-uhs-sdr12:
+    description: Value of the delay in the input path for SD UHS SDR12 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-sd-uhs-sdr25:
+    description: Value of the delay in the input path for SD UHS SDR25 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-sd-uhs-sdr50:
+    description: Value of the delay in the input path for SD UHS SDR50 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-sd-uhs-ddr50:
+    description: Value of the delay in the input path for SD UHS DDR50 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-mmc-highspeed:
+    description: Value of the delay in the input path for MMC high-speed timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-mmc-ddr:
+    description: Value of the delay in the input path for eMMC high-speed DDR timing
+
+  # PHY DLL clock delays:
+  # Each delay property represents the fraction of the clock period.
+  # The approximate delay value will be
+  # (<delay property value>/128)*sdmclk_clock_period.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-dll-delay-sdclk:
+    description: |
+      Value of the delay introduced on the sdclk output for all modes except
+      HS200, HS400 and HS400_ES.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x7f
+
+  cdns,phy-dll-delay-sdclk-hsmmc:
+    description: |
+      Value of the delay introduced on the sdclk output for HS200, HS400 and
+      HS400_ES speed modes.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x7f
+
+  cdns,phy-dll-delay-strobe:
+    description: |
+      Value of the delay introduced on the dat_strobe input used in
+      HS400 / HS400_ES speed modes.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x7f
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    emmc: mmc@5a000000 {
+        compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+        reg = <0x5a000000 0x400>;
+        interrupts = <0 78 4>;
+        clocks = <&clk 4>;
+        bus-width = <8>;
+        mmc-ddr-1_8v;
+        mmc-hs200-1_8v;
+        mmc-hs400-1_8v;
+        cdns,phy-dll-delay-sdclk = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
deleted file mode 100644
index 0419a63f73a0..000000000000
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-* Samsung Exynos specific extensions to the Synopsys Designware Mobile
-  Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
-	  specific extensions.
-	- "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
-	  specific extensions.
-	- "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
-	  specific extensions.
-	- "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
-	  specific extensions.
-	- "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
-	  specific extensions.
-	- "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
-	  specific extensions having an SMU.
-
-* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
-  unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
-  ignored for Exynos4 SoC's. The valid range of divider value is 0 to 7.
-
-* samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value
-  in transmit mode and CIU clock phase shift value in receive mode for single
-  data rate mode operation. Refer notes below for the order of the cells and the
-  valid values.
-
-* samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value
-  in transmit mode and CIU clock phase shift value in receive mode for double
-  data rate mode operation. Refer notes below for the order of the cells and the
-  valid values.
-* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase
-  shift value for hs400 mode operation.
-
-  Notes for the sdr-timing and ddr-timing values:
-
-    The order of the cells should be
-      - First Cell: CIU clock phase shift value for tx mode.
-      - Second Cell: CIU clock phase shift value for rx mode.
-
-    Valid values for SDR and DDR CIU clock timing for Exynos5250:
-      - valid value for tx phase shift and rx phase shift is 0 to 7.
-      - when CIU clock divider value is set to 3, all possible 8 phase shift
-        values can be used.
-      - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
-        phase shift clocks should be 0.
-
-* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode
-  (Latency value for delay line in Read path)
-
-Required properties for a slot (Deprecated - Recommend to use one slot per host):
-
-* gpios: specifies a list of gpios used for command, clock and data bus. The
-  first gpio is the command line and the second gpio is the clock line. The
-  rest of the gpios (depending on the bus-width property) are the data lines in
-  no particular order. The format of the gpio specifier depends on the gpio
-  controller.
-(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
-
-Example:
-
-  The MSHC controller node can be split into two portions, SoC specific and
-  board specific portions as listed below.
-
-	dwmmc0@12200000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		reg = <0x12200000 0x1000>;
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	dwmmc0@12200000 {
-		cap-mmc-highspeed;
-		cap-sd-highspeed;
-		broken-cd;
-		fifo-depth = <0x80>;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		samsung,dw-mshc-hs400-timing = <0 2>;
-		samsung,read-strobe-delay = <90>;
-		bus-width = <8>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
deleted file mode 100644
index 0f97d711444e..000000000000
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-* Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
-
-The Enhanced Secure Digital Host Controller on Freescale i.MX family
-provides an interface for MMC, SD, and SDIO types of memory cards.
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the sdhci-esdhc-imx driver.
-
-Required properties:
-- compatible : Should be "fsl,<chip>-esdhc", the supported chips include
-	       "fsl,imx25-esdhc"
-	       "fsl,imx35-esdhc"
-	       "fsl,imx51-esdhc"
-	       "fsl,imx53-esdhc"
-	       "fsl,imx6q-usdhc"
-	       "fsl,imx6sl-usdhc"
-	       "fsl,imx6sx-usdhc"
-	       "fsl,imx6ull-usdhc"
-	       "fsl,imx7d-usdhc"
-	       "fsl,imx7ulp-usdhc"
-	       "fsl,imx8mq-usdhc"
-	       "fsl,imx8mm-usdhc"
-	       "fsl,imx8mn-usdhc"
-	       "fsl,imx8mp-usdhc"
-	       "fsl,imx8qm-usdhc"
-	       "fsl,imx8qxp-usdhc"
-
-Optional properties:
-- fsl,wp-controller : Indicate to use controller internal write protection
-- fsl,delay-line : Specify the number of delay cells for override mode.
-  This is used to set the clock delay for DLL(Delay Line) on override mode
-  to select a proper data sampling window in case the clock quality is not good
-  due to signal path is too long on the board. Please refer to eSDHC/uSDHC
-  chapter, DLL (Delay Line) section in RM for details.
-- voltage-ranges : Specify the voltage range in case there are software
-  transparent level shifters on the outputs of the controller. Two cells are
-  required, first cell specifies minimum slot voltage (mV), second cell
-  specifies maximum slot voltage (mV). Several ranges could be specified.
-- fsl,tuning-start-tap: Specify the start dealy cell point when send first CMD19
-  in tuning procedure.
-- fsl,tuning-step: Specify the increasing delay cell steps in tuning procedure.
-  The uSDHC use one delay cell as default increasing step to do tuning process.
-  This property allows user to change the tuning step to more than one delay
-  cells which is useful for some special boards or cards when the default
-  tuning step can't find the proper delay window within limited tuning retries.
-
-Examples:
-
-esdhc@70004000 {
-	compatible = "fsl,imx51-esdhc";
-	reg = <0x70004000 0x4000>;
-	interrupts = <1>;
-	fsl,wp-controller;
-};
-
-esdhc@70008000 {
-	compatible = "fsl,imx51-esdhc";
-	reg = <0x70008000 0x4000>;
-	interrupts = <2>;
-	cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
-	wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
-};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
new file mode 100644
index 000000000000..29339d0196ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+
+description: |
+  The Enhanced Secure Digital Host Controller on Freescale i.MX family
+  provides an interface for MMC, SD, and SDIO types of memory cards.
+
+  This file documents differences between the core properties described
+  by mmc.txt and the properties used by the sdhci-esdhc-imx driver.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx25-esdhc
+          - fsl,imx35-esdhc
+          - fsl,imx51-esdhc
+          - fsl,imx53-esdhc
+          - fsl,imx6q-usdhc
+          - fsl,imx6sl-usdhc
+          - fsl,imx6sll-usdhc
+          - fsl,imx6sx-usdhc
+          - fsl,imx6ull-usdhc
+          - fsl,imx7d-usdhc
+          - fsl,imx7ulp-usdhc
+          - fsl,imx8mm-usdhc
+          - fsl,imxrt1050-usdhc
+          - nxp,s32g2-usdhc
+      - items:
+          - enum:
+              - fsl,imx8mq-usdhc
+          - const: fsl,imx7d-usdhc
+      - items:
+          - enum:
+              - fsl,imx8mn-usdhc
+              - fsl,imx8mp-usdhc
+              - fsl,imx93-usdhc
+              - fsl,imx8ulp-usdhc
+          - const: fsl,imx8mm-usdhc
+      - items:
+          - enum:
+              - fsl,imx8qm-usdhc
+          - const: fsl,imx8qxp-usdhc
+      - items:
+          - enum:
+              - fsl,imx8dxl-usdhc
+              - fsl,imx8mm-usdhc
+              - fsl,imx8mn-usdhc
+              - fsl,imx8mp-usdhc
+              - fsl,imx8qm-usdhc
+              - fsl,imx8qxp-usdhc
+          - const: fsl,imx7d-usdhc
+        deprecated: true
+      - items:
+          - enum:
+              - fsl,imx8mn-usdhc
+              - fsl,imx8mp-usdhc
+          - const: fsl,imx8mm-usdhc
+          - const: fsl,imx7d-usdhc
+        deprecated: true
+      - items:
+          - enum:
+              - fsl,imx8qm-usdhc
+          - const: fsl,imx8qxp-usdhc
+          - const: fsl,imx7d-usdhc
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,wp-controller:
+    description: |
+      boolean, if present, indicate to use controller internal write protection.
+    type: boolean
+
+  fsl,delay-line:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify the number of delay cells for override mode.
+      This is used to set the clock delay for DLL(Delay Line) on override mode
+      to select a proper data sampling window in case the clock quality is not good
+      due to signal path is too long on the board. Please refer to eSDHC/uSDHC
+      chapter, DLL (Delay Line) section in RM for details.
+    default: 0
+
+  voltage-ranges:
+    $ref: '/schemas/types.yaml#/definitions/uint32-matrix'
+    description: |
+      Specify the voltage range in case there are software transparent level
+      shifters on the outputs of the controller. Two cells are required, first
+      cell specifies minimum slot voltage (mV), second cell specifies maximum
+      slot voltage (mV).
+    items:
+      items:
+        - description: value for minimum slot voltage
+        - description: value for maximum slot voltage
+    maxItems: 1
+
+  fsl,tuning-start-tap:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify the start delay cell point when send first CMD19 in tuning procedure.
+    default: 0
+
+  fsl,tuning-step:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify the increasing delay cell steps in tuning procedure.
+      The uSDHC use one delay cell as default increasing step to do tuning process.
+      This property allows user to change the tuning step to more than one delay
+      cells which is useful for some special boards or cards when the default
+      tuning step can't find the proper delay window within limited tuning retries.
+    default: 0
+
+  fsl,strobe-dll-delay-target:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify the strobe dll control slave delay target.
+      This delay target programming host controller loopback read clock, and this
+      property allows user to change the delay target for the strobe input read clock.
+      If not use this property, driver default set the delay target to value 7.
+      Only eMMC HS400 mode need to take care of this property.
+    default: 0
+
+  clocks:
+    maxItems: 3
+    description:
+      Handle clocks for the sdhc controller.
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: ahb
+      - const: per
+
+  power-domains:
+    maxItems: 1
+
+  pinctrl-names:
+    oneOf:
+      - minItems: 3
+        items:
+          - const: default
+          - const: state_100mhz
+          - const: state_200mhz
+          - const: sleep
+      - minItems: 1
+        items:
+          - const: default
+          - const: sleep
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@70004000 {
+        compatible = "fsl,imx51-esdhc";
+        reg = <0x70004000 0x4000>;
+        interrupts = <1>;
+        fsl,wp-controller;
+    };
+
+    mmc@70008000 {
+        compatible = "fsl,imx51-esdhc";
+        reg = <0x70008000 0x4000>;
+        interrupts = <2>;
+        cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
+        wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
+    };
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt
deleted file mode 100644
index 184ccffe2739..000000000000
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Freescale Secure Digital Host Controller for i.MX2/3 series
-
-This file documents differences to the properties defined in mmc.txt.
-
-Required properties:
-- compatible : Should be "fsl,<chip>-mmc", chip can be imx21 or imx31
-
-Optional properties:
-- dmas: One DMA phandle with arguments as defined by the devicetree bindings
-	of the used DMA controller.
-- dma-names: Has to be "rx-tx".
-
-Example:
-
-sdhci1: sdhci@10014000 {
-	compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
-	reg = <0x10014000 0x1000>;
-	interrupts = <11>;
-	dmas = <&dma 7>;
-	dma-names = "rx-tx";
-	bus-width = <4>;
-	cd-gpios = <&gpio3 29>;
-};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
new file mode 100644
index 000000000000..ffa162722b8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fsl-imx-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Secure Digital Host Controller for i.MX2/3 series
+
+maintainers:
+  - Markus Pargmann <mpa@pengutronix.de>
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx21-mmc
+      - const: fsl,imx31-mmc
+      - items:
+          - const: fsl,imx27-mmc
+          - const: fsl,imx21-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@10014000 {
+        compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+        reg = <0x10014000 0x1000>;
+        interrupts = <11>;
+        dmas = <&dma 7>;
+        dma-names = "rx-tx";
+        bus-width = <4>;
+        cd-gpios = <&gpio3 29>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
deleted file mode 100644
index c54e577eea07..000000000000
--- a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Imagination specific extensions to the Synopsys Designware Mobile Storage
-  Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Imagination specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "img,pistachio-dw-mshc": for Pistachio SoCs
-
-Example:
-
-	mmc@18142000 {
-		compatible = "img,pistachio-dw-mshc";
-		reg = <0x18142000 0x400>;
-		interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>;
-
-		clocks = <&system_clk>, <&sdhost_clk>;
-		clock-names = "biu", "ciu";
-
-		fifo-depth = <0x20>;
-		bus-width = <4>;
-		disable-wp;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
new file mode 100644
index 000000000000..2d10aedf2e00
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/ingenic,mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs MMC Controller DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-mmc
+          - ingenic,jz4725b-mmc
+          - ingenic,jz4760-mmc
+          - ingenic,jz4775-mmc
+          - ingenic,jz4780-mmc
+          - ingenic,x1000-mmc
+      - items:
+          - const: ingenic,jz4770-mmc
+          - const: ingenic,jz4760-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mmc
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: rx
+          - const: tx
+      - const: tx-rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    #include <dt-bindings/dma/jz4780-dma.h>
+    mmc0: mmc@13450000 {
+      compatible = "ingenic,jz4780-mmc";
+      reg = <0x13450000 0x1000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <37>;
+
+      clocks = <&cgu JZ4780_CLK_MSC0>;
+      clock-names = "mmc";
+
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      cap-sdio-irq;
+      dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>,
+             <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
+      dma-names = "rx", "tx";
+    };
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    #include <dt-bindings/dma/jz4780-dma.h>
+    /*
+     * Alternative version of the example above,
+     * but using one single DMA channel for both
+     * TX and RX.
+     */
+    mmc1: mmc@13460000 {
+      compatible = "ingenic,jz4780-mmc";
+      reg = <0x13460000 0x1000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <36>;
+
+      clocks = <&cgu JZ4780_CLK_MSC1>;
+      clock-names = "mmc";
+
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      cap-sdio-irq;
+      dmas = <&dma JZ4780_DMA_MSC1_TX JZ4780_DMA_MSC1_RX 0xffffffff>;
+      dma-names = "tx-rx";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/jz4740.txt b/Documentation/devicetree/bindings/mmc/jz4740.txt
deleted file mode 100644
index 453d3b9d145d..000000000000
--- a/Documentation/devicetree/bindings/mmc/jz4740.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Ingenic XBurst MMC controllers
-
-This file documents the device tree properties used for the MMC controller in
-Ingenic JZ4740/JZ4760/JZ4780/X1000 SoCs. These are in addition to the core MMC
-properties described in mmc.txt.
-
-Required properties:
-- compatible: Should be one of the following:
-  - "ingenic,jz4740-mmc" for the JZ4740
-  - "ingenic,jz4725b-mmc" for the JZ4725B
-  - "ingenic,jz4760-mmc" for the JZ4760
-  - "ingenic,jz4780-mmc" for the JZ4780
-  - "ingenic,x1000-mmc" for the X1000
-- reg: Should contain the MMC controller registers location and length.
-- interrupts: Should contain the interrupt specifier of the MMC controller.
-- clocks: Clock for the MMC controller.
-
-Optional properties:
-- dmas: List of DMA specifiers with the controller specific format
-        as described in the generic DMA client binding. A tx and rx
-        specifier is required.
-- dma-names: RX and TX  DMA request names.
-        Should be "rx" and "tx", in that order.
-
-For additional details on DMA client bindings see ../dma/dma.txt.
-
-Example:
-
-mmc0: mmc@13450000 {
-	compatible = "ingenic,jz4780-mmc";
-	reg = <0x13450000 0x1000>;
-
-	interrupt-parent = <&intc>;
-	interrupts = <37>;
-
-	clocks = <&cgu JZ4780_CLK_MSC0>;
-	clock-names = "mmc";
-
-	dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>, <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
-	dma-names = "rx", "tx";
-};
diff --git a/Documentation/devicetree/bindings/mmc/litex,mmc.yaml b/Documentation/devicetree/bindings/mmc/litex,mmc.yaml
new file mode 100644
index 000000000000..ef9e0da44bf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/litex,mmc.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/litex,mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteX LiteSDCard device
+
+maintainers:
+  - Gabriel Somlo <gsomlo@gmail.com>
+
+description: |
+  LiteSDCard is a small footprint, configurable SDCard core for FPGA based
+  system on chips.
+
+  The hardware source is Open Source and can be found on at
+  https://github.com/enjoy-digital/litesdcard/.
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    const: litex,mmc
+
+  reg:
+    items:
+      - description: PHY registers
+      - description: CORE registers
+      - description: DMA Reader buffer
+      - description: DMA Writer buffer
+      - description: IRQ registers
+    minItems: 4
+
+  reg-names:
+    items:
+      - const: phy
+      - const: core
+      - const: reader
+      - const: writer
+      - const: irq
+    minItems: 4
+
+  clocks:
+    maxItems: 1
+    description:
+      Handle to reference clock.
+
+  vmmc-supply:
+    description:
+      Handle to fixed-voltage supply for the card power.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - vmmc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    mmc: mmc@12005000 {
+        compatible = "litex,mmc";
+        reg = <0x12005000 0x100>,
+              <0x12003800 0x100>,
+              <0x12003000 0x100>,
+              <0x12004800 0x100>,
+              <0x12004000 0x100>;
+        reg-names = "phy", "core", "reader", "writer", "irq";
+        clocks = <&reference_clk>;
+        vmmc-supply = <&vreg_mmc>;
+        interrupts = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml
new file mode 100644
index 000000000000..7c9c652ad59c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/marvell,dove-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell sdhci-dove controller
+
+maintainers:
+  - Adrian Hunter <adrian.hunter@intel.com>
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    const: marvell,dove-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sdio0: mmc@92000 {
+      compatible = "marvell,dove-sdhci";
+      reg = <0x92000 0x100>;
+      interrupts = <35>;
+      clocks = <&gate_clk 9>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml b/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml
new file mode 100644
index 000000000000..8a97ded15aed
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/marvell,orion-sdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell orion-sdio controller
+
+maintainers:
+  - Nicolas Pitre <nico@fluxnic.net>
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    const: marvell,orion-sdio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@d00d4000 {
+      compatible = "marvell,orion-sdio";
+      reg = <0xd00d4000 0x200>;
+      interrupts = <54>;
+      clocks = <&gateclk 17>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
deleted file mode 100644
index ed1456f5c94d..000000000000
--- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-Marvell Xenon SDHCI Controller device tree bindings
-This file documents differences between the core mmc properties
-described by mmc.txt and the properties used by the Xenon implementation.
-
-Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
-Each SDHC is independent and owns independent resources, such as register sets,
-clock and PHY.
-Each SDHC should have an independent device tree node.
-
-Required Properties:
-- compatible: should be one of the following
-  - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SoC.
-  Must provide a second register area and marvell,pad-type.
-  - "marvell,armada-ap806-sdhci": For controllers on Armada AP806.
-  - "marvell,armada-cp110-sdhci": For controllers on Armada CP110.
-
-- clocks:
-  Array of clocks required for SDHC.
-  Require at least input clock for Xenon IP core. For Armada AP806 and
-  CP110, the AXI clock is also mandatory.
-
-- clock-names:
-  Array of names corresponding to clocks property.
-  The input clock for Xenon IP core should be named as "core".
-  The input clock for the AXI bus must be named as "axi".
-
-- reg:
-  * For "marvell,armada-3700-sdhci", two register areas.
-    The first one for Xenon IP register. The second one for the Armada 3700 SoC
-    PHY PAD Voltage Control register.
-    Please follow the examples with compatible "marvell,armada-3700-sdhci"
-    in below.
-    Please also check property marvell,pad-type in below.
-
-  * For other compatible strings, one register area for Xenon IP.
-
-Optional Properties:
-- marvell,xenon-sdhc-id:
-  Indicate the corresponding bit index of current SDHC in
-  SDHC System Operation Control Register Bit[7:0].
-  Set/clear the corresponding bit to enable/disable current SDHC.
-  If Xenon IP contains only one SDHC, this property is optional.
-
-- marvell,xenon-phy-type:
-  Xenon support multiple types of PHYs.
-  To select eMMC 5.1 PHY, set:
-  marvell,xenon-phy-type = "emmc 5.1 phy"
-  eMMC 5.1 PHY is the default choice if this property is not provided.
-  To select eMMC 5.0 PHY, set:
-  marvell,xenon-phy-type = "emmc 5.0 phy"
-
-  All those types of PHYs can support eMMC, SD and SDIO.
-  Please note that this property only presents the type of PHY.
-  It doesn't stand for the entire SDHC type or property.
-  For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only
-  supports eMMC 5.1.
-
-- marvell,xenon-phy-znr:
-  Set PHY ZNR value.
-  Only available for eMMC PHY.
-  Valid range = [0:0x1F].
-  ZNR is set as 0xF by default if this property is not provided.
-
-- marvell,xenon-phy-zpr:
-  Set PHY ZPR value.
-  Only available for eMMC PHY.
-  Valid range = [0:0x1F].
-  ZPR is set as 0xF by default if this property is not provided.
-
-- marvell,xenon-phy-nr-success-tun:
-  Set the number of required consecutive successful sampling points
-  used to identify a valid sampling window, in tuning process.
-  Valid range = [1:7].
-  Set as 0x4 by default if this property is not provided.
-
-- marvell,xenon-phy-tun-step-divider:
-  Set the divider for calculating TUN_STEP.
-  Set as 64 by default if this property is not provided.
-
-- marvell,xenon-phy-slow-mode:
-  If this property is selected, transfers will bypass PHY.
-  Only available when bus frequency lower than 55MHz in SDR mode.
-  Disabled by default. Please only try this property if timing issues
-  always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25,
-  SD Default Speed and HS mode and eMMC legacy speed mode.
-
-- marvell,xenon-tun-count:
-  Xenon SDHC SoC usually doesn't provide re-tuning counter in
-  Capabilities Register 3 Bit[11:8].
-  This property provides the re-tuning counter.
-  If this property is not set, default re-tuning counter will
-  be set as 0x9 in driver.
-
-- marvell,pad-type:
-  Type of Armada 3700 SoC PHY PAD Voltage Controller register.
-  Only valid when "marvell,armada-3700-sdhci" is selected.
-  Two types: "sd" and "fixed-1-8v".
-  If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning and is
-  switched to 1.8V when later in higher speed mode.
-  If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for eMMC.
-  Please follow the examples with compatible "marvell,armada-3700-sdhci"
-  in below.
-
-Example:
-- For eMMC:
-
-	sdhci@aa0000 {
-		compatible = "marvell,armada-ap806-sdhci";
-		reg = <0xaa0000 0x1000>;
-		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
-		clocks = <&emmc_clk>,<&axi_clk>;
-		clock-names = "core", "axi";
-		bus-width = <4>;
-		marvell,xenon-phy-slow-mode;
-		marvell,xenon-tun-count = <11>;
-		non-removable;
-		no-sd;
-		no-sdio;
-
-		/* Vmmc and Vqmmc are both fixed */
-	};
-
-- For SD/SDIO:
-
-	sdhci@ab0000 {
-		compatible = "marvell,armada-cp110-sdhci";
-		reg = <0xab0000 0x1000>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
-		vqmmc-supply = <&sd_vqmmc_regulator>;
-		vmmc-supply = <&sd_vmmc_regulator>;
-		clocks = <&sdclk>, <&axi_clk>;
-		clock-names = "core", "axi";
-		bus-width = <4>;
-		marvell,xenon-tun-count = <9>;
-	};
-
-- For eMMC with compatible "marvell,armada-3700-sdhci":
-
-	sdhci@aa0000 {
-		compatible = "marvell,armada-3700-sdhci";
-		reg = <0xaa0000 0x1000>,
-		      <phy_addr 0x4>;
-		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
-		clocks = <&emmcclk>;
-		clock-names = "core";
-		bus-width = <8>;
-		mmc-ddr-1_8v;
-		mmc-hs400-1_8v;
-		non-removable;
-		no-sd;
-		no-sdio;
-
-		/* Vmmc and Vqmmc are both fixed */
-
-		marvell,pad-type = "fixed-1-8v";
-	};
-
-- For SD/SDIO with compatible "marvell,armada-3700-sdhci":
-
-	sdhci@ab0000 {
-		compatible = "marvell,armada-3700-sdhci";
-		reg = <0xab0000 0x1000>,
-		      <phy_addr 0x4>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
-		vqmmc-supply = <&sd_regulator>;
-		/* Vmmc is fixed */
-		clocks = <&sdclk>;
-		clock-names = "core";
-		bus-width = <4>;
-
-		marvell,pad-type = "sd";
-	};
diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
new file mode 100644
index 000000000000..3ee758886558
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Xenon SDHCI Controller
+
+description: |
+  This file documents differences between the core MMC properties described by
+  mmc-controller.yaml and the properties used by the Xenon implementation.
+
+  Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
+  Each SDHC is independent and owns independent resources, such as register
+  sets, clock and PHY.
+
+  Each SDHC should have an independent device tree node.
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,armada-cp110-sdhci
+          - marvell,armada-ap806-sdhci
+
+      - items:
+          - const: marvell,armada-ap807-sdhci
+          - const: marvell,armada-ap806-sdhci
+
+      - items:
+          - const: marvell,armada-3700-sdhci
+          - const: marvell,sdhci-xenon
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description: |
+      For "marvell,armada-3700-sdhci", two register areas.  The first one
+      for Xenon IP register. The second one for the Armada 3700 SoC PHY PAD
+      Voltage Control register.  Please follow the examples with compatible
+      "marvell,armada-3700-sdhci" in below.
+      Please also check property marvell,pad-type in below.
+
+      For other compatible strings, one register area for Xenon IP.
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: axi
+
+  interrupts:
+    maxItems: 1
+
+  marvell,xenon-sdhc-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description: |
+      Indicate the corresponding bit index of current SDHC in SDHC System
+      Operation Control Register Bit[7:0].  Set/clear the corresponding bit to
+      enable/disable current SDHC.
+
+  marvell,xenon-phy-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - "emmc 5.1 phy"
+      - "emmc 5.0 phy"
+    description: |
+      Xenon support multiple types of PHYs. To select eMMC 5.1 PHY, set:
+      marvell,xenon-phy-type = "emmc 5.1 phy" eMMC 5.1 PHY is the default
+      choice if this property is not provided.  To select eMMC 5.0 PHY, set:
+      marvell,xenon-phy-type = "emmc 5.0 phy"
+
+      All those types of PHYs can support eMMC, SD and SDIO. Please note that
+      this property only presents the type of PHY.  It doesn't stand for the
+      entire SDHC type or property.  For example, "emmc 5.1 phy" doesn't mean
+      that this Xenon SDHC only supports eMMC 5.1.
+
+  marvell,xenon-phy-znr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+    default: 0xf
+    description: |
+      Set PHY ZNR value.
+      Only available for eMMC PHY.
+
+  marvell,xenon-phy-zpr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+    default: 0xf
+    description: |
+      Set PHY ZPR value.
+      Only available for eMMC PHY.
+
+  marvell,xenon-phy-nr-success-tun:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 7
+    default: 0x4
+    description: |
+      Set the number of required consecutive successful sampling points
+      used to identify a valid sampling window, in tuning process.
+
+  marvell,xenon-phy-tun-step-divider:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 64
+    description: |
+      Set the divider for calculating TUN_STEP.
+
+  marvell,xenon-phy-slow-mode:
+    type: boolean
+    description: |
+      If this property is selected, transfers will bypass PHY.
+      Only available when bus frequency lower than 55MHz in SDR mode.
+      Disabled by default. Please only try this property if timing issues
+      always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25,
+      SD Default Speed and HS mode and eMMC legacy speed mode.
+
+  marvell,xenon-tun-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x9
+    description: |
+      Xenon SDHC SoC usually doesn't provide re-tuning counter in
+      Capabilities Register 3 Bit[11:8].
+      This property provides the re-tuning counter.
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-3700-sdhci
+
+    then:
+      properties:
+        reg:
+          items:
+            - description: Xenon IP registers
+            - description: Armada 3700 SoC PHY PAD Voltage Control register
+
+        marvell,pad-type:
+          $ref: /schemas/types.yaml#/definitions/string
+          enum:
+            - sd
+            - fixed-1-8v
+          description: |
+            Type of Armada 3700 SoC PHY PAD Voltage Controller register.
+            If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning
+            and is switched to 1.8V when later in higher speed mode.
+            If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for
+            eMMC.
+            Please follow the examples with compatible
+            "marvell,armada-3700-sdhci" in below.
+
+      required:
+        - marvell,pad-type
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,armada-cp110-sdhci
+              - marvell,armada-ap807-sdhci
+              - marvell,armada-ap806-sdhci
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: core
+            - const: axi
+
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // For eMMC
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@aa0000 {
+      compatible = "marvell,armada-ap807-sdhci", "marvell,armada-ap806-sdhci";
+      reg = <0xaa0000 0x1000>;
+      interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&emmc_clk 0>, <&axi_clk 0>;
+      clock-names = "core", "axi";
+      bus-width = <4>;
+      marvell,xenon-phy-slow-mode;
+      marvell,xenon-tun-count = <11>;
+      non-removable;
+      no-sd;
+      no-sdio;
+
+      /* Vmmc and Vqmmc are both fixed */
+    };
+
+  - |
+    // For SD/SDIO
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@ab0000 {
+      compatible = "marvell,armada-cp110-sdhci";
+      reg = <0xab0000 0x1000>;
+      interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+      vqmmc-supply = <&sd_vqmmc_regulator>;
+      vmmc-supply = <&sd_vmmc_regulator>;
+      clocks = <&sdclk 0>, <&axi_clk 0>;
+      clock-names = "core", "axi";
+      bus-width = <4>;
+      marvell,xenon-tun-count = <9>;
+    };
+
+  - |
+    // For eMMC with compatible "marvell,armada-3700-sdhci":
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@aa0000 {
+      compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon";
+      reg = <0xaa0000 0x1000>,
+            <0x17808 0x4>;
+      interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&emmcclk 0>;
+      clock-names = "core";
+      bus-width = <8>;
+      mmc-ddr-1_8v;
+      mmc-hs400-1_8v;
+      non-removable;
+      no-sd;
+      no-sdio;
+
+      /* Vmmc and Vqmmc are both fixed */
+
+      marvell,pad-type = "fixed-1-8v";
+    };
+
+  - |
+    // For SD/SDIO with compatible "marvell,armada-3700-sdhci":
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@ab0000 {
+      compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon";
+      reg = <0xab0000 0x1000>,
+            <0x17808 0x4>;
+      interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+      vqmmc-supply = <&sd_regulator>;
+      /* Vmmc is fixed */
+      clocks = <&sdclk 0>;
+      clock-names = "core";
+      bus-width = <4>;
+
+      marvell,pad-type = "sd";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
new file mode 100644
index 000000000000..69ff065c9a39
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/microchip,dw-sparx5-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Mobile Storage Host Controller Binding
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    const: microchip,dw-sparx5-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Handle to "core" clock for the sdhci controller.
+
+  clock-names:
+    items:
+      - const: core
+
+  microchip,clock-delay:
+    description: Delay clock to card to meet setup time requirements.
+      Each step increase by 1.25ns.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 1
+    maximum: 15
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/microchip,sparx5.h>
+    sdhci0: mmc@600800000 {
+        compatible = "microchip,dw-sparx5-sdhci";
+        reg = <0x00800000 0x1000>;
+        pinctrl-0 = <&emmc_pins>;
+        pinctrl-names = "default";
+        clocks = <&clks CLK_ID_AUX1>;
+        clock-names = "core";
+        assigned-clocks = <&clks CLK_ID_AUX1>;
+        assigned-clock-rates = <800000000>;
+        interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+        bus-width = <8>;
+        microchip,clock-delay = <10>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.txt b/Documentation/devicetree/bindings/mmc/mmc-card.txt
deleted file mode 100644
index 8d2d71758907..000000000000
--- a/Documentation/devicetree/bindings/mmc/mmc-card.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-mmc-card / eMMC bindings
-------------------------
-
-This documents describes the devicetree bindings for a mmc-host controller
-child node describing a mmc-card / an eMMC, see "Use of Function subnodes"
-in mmc.txt
-
-Required properties:
--compatible : Must be "mmc-card"
--reg        : Must be <0>
-
-Optional properties:
--broken-hpi : Use this to indicate that the mmc-card has a broken hpi
-              implementation, and that hpi should not be used
-
-Example:
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_a>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <8>;
-	non-removable;
-
-	mmccard: mmccard@0 {
-		reg = <0>;
-		compatible = "mmc-card";
-		broken-hpi;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.yaml b/Documentation/devicetree/bindings/mmc/mmc-card.yaml
new file mode 100644
index 000000000000..fd347126449a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-card.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMC Card / eMMC Generic
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description: |
+  This documents describes the devicetree bindings for a mmc-host controller
+  child node describing a mmc-card / an eMMC.
+
+properties:
+  compatible:
+    const: mmc-card
+
+  reg:
+    const: 0
+
+  broken-hpi:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Use this to indicate that the mmc-card has a broken hpi
+      implementation, and that hpi should not be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mmc {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        card@0 {
+            compatible = "mmc-card";
+            reg = <0>;
+            broken-hpi;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 8fded83c519a..802e3ca8be4d 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -14,6 +14,10 @@ description: |
   that requires the respective functionality should implement them using
   these definitions.
 
+  It is possible to assign a fixed index mmcN to an MMC host controller
+  (and the corresponding mmcblkN devices) by defining an alias in the
+  /aliases device tree node.
+
 properties:
   $nodename:
     pattern: "^mmc(@.*)?$"
@@ -36,6 +40,7 @@ properties:
       There is no card detection available; polling must be used.
 
   cd-gpios:
+    maxItems: 1
     description:
       The card detection will be done using the GPIO provided.
 
@@ -76,20 +81,25 @@ properties:
   # Other properties
 
   bus-width:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 4, 8]
-        default: 1
     description:
       Number of data lines.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 4, 8]
+    default: 1
 
   max-frequency:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 400000
-      - maximum: 200000000
-    description:
-      Maximum operating frequency of the bus.
+    description: |
+      Maximum operating frequency of the bus:
+        - for eMMC, the maximum supported frequency is 200MHz,
+        - for SD/SDIO cards the SDR104 mode has a max supported
+          frequency of 208MHz,
+        - some mmc host controllers do support a max frequency upto
+          384MHz.
+      So, lets keep the maximum supported value here.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 400000
+    maximum: 384000000
 
   disable-wp:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -102,6 +112,7 @@ properties:
       line. Not used in combination with eMMC or SDIO.
 
   wp-gpios:
+    maxItems: 1
     description:
       GPIO to use for the write-protect detection.
 
@@ -171,6 +182,11 @@ properties:
     description:
       Full power cycle of the card is supported.
 
+  full-pwr-cycle-in-suspend:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Full power cycle of the card in suspend is supported.
+
   mmc-ddr-1_2v:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -211,14 +227,18 @@ properties:
     description:
       eMMC HS400 enhanced strobe mode is supported
 
+  no-mmc-hs400:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      All eMMC HS400 modes are not supported.
+
   dsr:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-      - maximum: 0xffff
     description:
       Value the card Driver Stage Register (DSR) should be programmed
       with.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xffff
 
   no-sdio:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -238,25 +258,22 @@ properties:
       initialization.
 
   fixed-emmc-driver-type:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-      - maximum: 4
     description:
       For non-removable eMMC, enforce this driver type. The value is
       the driver type as specified in the eMMC specification (table
       206 in spec version 5.1)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 4
 
   post-power-on-delay-ms:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 10
     description:
       It was invented for MMC pwrseq-simple which could be referred to
       mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay
       waiting for I/O signalling and card power supply to be stable,
       regardless of whether pwrseq-simple is used. Default to 10ms if
       no available.
+    default: 10
 
   supports-cqe:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -288,7 +305,10 @@ properties:
 
   vqmmc-supply:
     description:
-      Supply for the bus IO line power
+      Supply for the bus IO line power, such as a level shifter.
+      If the level shifter is controlled by a GPIO line, this shall
+      be modeled as a "regulator-fixed" with a GPIO line for
+      switching the level shifter on/off.
 
   mmc-pwrseq:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -323,18 +343,12 @@ patternProperties:
               subnode describes. A value of 0 denotes the memory SD
               function, values from 1 to 7 denote the SDIO functions.
 
-      broken-hpi:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          Use this to indicate that the mmc-card has a broken hpi
-          implementation, and that hpi should not be used.
-
     required:
       - reg
 
   "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
     minItems: 2
     maxItems: 2
     items:
@@ -349,23 +363,9 @@ dependencies:
   cd-debounce-delay-ms: [ cd-gpios ]
   fixed-emmc-driver-type: [ non-removable ]
 
-examples:
-  - |
-    sdhci@ab000000 {
-        compatible = "sdhci";
-        reg = <0xab000000 0x200>;
-        interrupts = <23>;
-        bus-width = <4>;
-        cd-gpios = <&gpio 69 0>;
-        cd-inverted;
-        wp-gpios = <&gpio 70 0>;
-        max-frequency = <50000000>;
-        keep-power-in-suspend;
-        wakeup-source;
-        mmc-pwrseq = <&sdhci0_pwrseq>;
-        clk-phase-sd-hs = <63>, <72>;
-    };
+additionalProperties: true
 
+examples:
   - |
     mmc3: mmc@1c12000 {
         #address-cells = <1>;
@@ -378,9 +378,9 @@ examples:
         non-removable;
         mmc-pwrseq = <&sdhci0_pwrseq>;
 
-        brcmf: bcrmf@1 {
+        brcmf: wifi@1 {
             reg = <1>;
-            compatible = "brcm,bcm43xx-fmac";
+            compatible = "brcm,bcm4329-fmac";
             interrupt-parent = <&pio>;
             interrupts = <10 8>;
             interrupt-names = "host-wake";
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
deleted file mode 100644
index 3d965d57e00b..000000000000
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* The simple eMMC hardware reset provider
-
-The purpose of this driver is to perform standard eMMC hw reset
-procedure, as described by Jedec 4.4 specification. This procedure is
-performed just after MMC core enabled power to the given mmc host (to
-fix possible issues if bootloader has left eMMC card in initialized or
-unknown state), and before performing complete system reboot (also in
-case of emergency reboot call). The latter is needed on boards, which
-doesn't have hardware reset logic connected to emmc card and (limited or
-broken) ROM bootloaders are unable to read second stage from the emmc
-card if the card is left in unknown or already initialized state.
-
-Required properties:
-- compatible : contains "mmc-pwrseq-emmc".
-- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted
-	and then deasserted to perform eMMC card reset. To perform
-	reset procedure as described in Jedec 4.4 specification, the
-	gpio line should be defined as GPIO_ACTIVE_LOW.
-
-Example:
-
-	sdhci0_pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	}
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
new file mode 100644
index 000000000000..1fc7e620f328
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-emmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple eMMC hardware reset provider binding
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+  The purpose of this driver is to perform standard eMMC hw reset
+  procedure, as described by Jedec 4.4 specification. This procedure is
+  performed just after MMC core enabled power to the given mmc host (to
+  fix possible issues if bootloader has left eMMC card in initialized or
+  unknown state), and before performing complete system reboot (also in
+  case of emergency reboot call). The latter is needed on boards, which
+  doesn't have hardware reset logic connected to emmc card and (limited or
+  broken) ROM bootloaders are unable to read second stage from the emmc
+  card if the card is left in unknown or already initialized state.
+
+properties:
+  compatible:
+    const: mmc-pwrseq-emmc
+
+  reset-gpios:
+    minItems: 1
+    description:
+      contains a GPIO specifier. The reset GPIO is asserted
+      and then deasserted to perform eMMC card reset. To perform
+      reset procedure as described in Jedec 4.4 specification, the
+      gpio line should be defined as GPIO_ACTIVE_LOW.
+
+required:
+  - compatible
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    sdhci0_pwrseq {
+      compatible = "mmc-pwrseq-emmc";
+      reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
deleted file mode 100644
index 22e9340e4ba2..000000000000
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* Marvell SD8787 power sequence provider
-
-Required properties:
-- compatible: must be "mmc-pwrseq-sd8787".
-- powerdown-gpios: contains a power down GPIO specifier with the
-		   default active state
-- reset-gpios: contains a reset GPIO specifier with the default
-		   active state
-
-Example:
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-sd8787";
-		powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
-		reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
-	}
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
new file mode 100644
index 000000000000..9e2396751030
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-sd8787.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell SD8787 power sequence provider binding
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - mmc-pwrseq-sd8787
+      - mmc-pwrseq-wilc1000
+
+  powerdown-gpios:
+    minItems: 1
+    description:
+      contains a power down GPIO specifier with the default active state
+
+  reset-gpios:
+    minItems: 1
+    description:
+      contains a reset GPIO specifier with the default active state
+
+required:
+  - compatible
+  - powerdown-gpios
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    wifi_pwrseq: wifi_pwrseq {
+      compatible = "mmc-pwrseq-sd8787";
+      powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+      reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
deleted file mode 100644
index 9029b45b8a22..000000000000
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* The simple MMC power sequence provider
-
-The purpose of the simple MMC power sequence provider is to supports a set of
-common properties between various SOC designs. It thus enables us to use the
-same provider for several SOC designs.
-
-Required properties:
-- compatible : contains "mmc-pwrseq-simple".
-
-Optional properties:
-- reset-gpios : contains a list of GPIO specifiers. The reset GPIOs are asserted
-	at initialization and prior we start the power up procedure of the card.
-	They will be de-asserted right after the power has been provided to the
-	card.
-- clocks : Must contain an entry for the entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entry:
-  "ext_clock" (External clock provided to the card).
-- post-power-on-delay-ms : Delay in ms after powering the card and
-	de-asserting the reset-gpios (if any)
-- power-off-delay-us : Delay in us after asserting the reset-gpios (if any)
-	during power off of the card.
-
-Example:
-
-	sdhci0_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		clocks = <&clk_32768_ck>;
-		clock-names = "ext_clock";
-	}
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
new file mode 100644
index 000000000000..226fb191913d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-simple.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple MMC power sequence provider binding
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+  The purpose of the simple MMC power sequence provider is to supports a set
+  of common properties between various SOC designs. It thus enables us to use
+  the same provider for several SOC designs.
+
+properties:
+  compatible:
+    const: mmc-pwrseq-simple
+
+  reset-gpios:
+    minItems: 1
+    # Put some limit to avoid false warnings
+    maxItems: 32
+    description:
+      contains a list of GPIO specifiers. The reset GPIOs are asserted
+      at initialization and prior we start the power up procedure of the card.
+      They will be de-asserted right after the power has been provided to the
+      card.
+
+  clocks:
+    minItems: 1
+    description: Handle for the entry in clock-names.
+
+  clock-names:
+    items:
+      - const: ext_clock
+    description: External clock provided to the card.
+
+  post-power-on-delay-ms:
+    description:
+      Delay in ms after powering the card and de-asserting the
+      reset-gpios (if any).
+
+  power-off-delay-us:
+    description:
+      Delay in us after asserting the reset-gpios (if any)
+      during power off of the card.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    sdhci0_pwrseq {
+      compatible = "mmc-pwrseq-simple";
+      reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+      clocks = <&clk_32768_ck>;
+      clock-names = "ext_clock";
+    };
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
deleted file mode 100644
index 75486cca8054..000000000000
--- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-MMC/SD/SDIO slot directly connected to a SPI bus
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the mmc_spi driver.
-
-Required properties:
-- spi-max-frequency : maximum frequency for this device (Hz).
-- voltage-ranges : two cells are required, first cell specifies minimum
-  slot voltage (mV), second cell specifies maximum slot voltage (mV).
-  Several ranges could be specified.
-
-Optional properties:
-- gpios : may specify GPIOs in this order: Card-Detect GPIO,
-  Write-Protect GPIO. Note that this does not follow the
-  binding from mmc.txt, for historical reasons.
-
-Example:
-
-	mmc-slot@0 {
-		compatible = "fsl,mpc8323rdb-mmc-slot",
-			     "mmc-spi-slot";
-		reg = <0>;
-		gpios = <&qe_pio_d 14 1
-			 &qe_pio_d 15 0>;
-		voltage-ranges = <3300 3300>;
-		spi-max-frequency = <50000000>;
-		interrupts = <42>;
-		interrupt-parent = <&PIC>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
new file mode 100644
index 000000000000..c0662ce9946d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-spi-slot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMC/SD/SDIO slot directly connected to a SPI bus
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+description: |
+  The extra properties used by an mmc connected via SPI.
+
+properties:
+  compatible:
+    const: mmc-spi-slot
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  voltage-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Two cells are required, first cell specifies minimum slot voltage (mV),
+      second cell specifies maximum slot voltage (mV).
+    items:
+      - description: |
+          value for minimum slot voltage in mV
+        default: 3200
+      - description: |
+          value for maximum slot voltage in mV
+        default: 3400
+
+  gpios:
+    description: |
+      For historical reasons, this does not follow the generic mmc-controller
+      binding.
+    minItems: 1
+    items:
+      - description: Card-Detect GPIO
+      - description: Write-Protect GPIO
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mmc@0 {
+        compatible = "mmc-spi-slot";
+        reg = <0>;
+        gpios = <&gpio 14 GPIO_ACTIVE_LOW>, <&gpio 15 GPIO_ACTIVE_HIGH>;
+        voltage-ranges = <3300 3300>;
+        spi-max-frequency = <50000000>;
+        interrupts = <42>;
+        interrupt-parent = <&PIC>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt
deleted file mode 100644
index 6d3c626e017d..000000000000
--- a/Documentation/devicetree/bindings/mmc/mmci.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1
-
-The ARM PrimeCell MMCI PL180 and PL181 provides an interface for
-reading and writing to MultiMedia and SD cards alike.
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the mmci driver. Using "st" as
-the prefix for a property, indicates support by the ST Micro variant.
-
-Required properties:
-- compatible             : contains "arm,pl18x", "arm,primecell".
-- vmmc-supply            : phandle to the regulator device tree node, mentioned
-                           as the VCC/VDD supply in the eMMC/SD specs.
-
-Optional properties:
-- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides
-                           the ID provided by the HW
-- resets                 : phandle to internal reset line.
-			   Should be defined for sdmmc variant.
-- vqmmc-supply           : phandle to the regulator device tree node, mentioned
-                           as the VCCQ/VDD_IO supply in the eMMC/SD specs.
-specific for ux500 variant:
-- st,sig-dir-dat0        : bus signal direction pin used for DAT[0].
-- st,sig-dir-dat2        : bus signal direction pin used for DAT[2].
-- st,sig-dir-dat31       : bus signal direction pin used for DAT[3] and DAT[1].
-- st,sig-dir-dat74       : bus signal direction pin used for DAT[4] to DAT[7].
-- st,sig-dir-cmd         : cmd signal direction pin used for CMD.
-- st,sig-pin-fbclk       : feedback clock signal pin used.
-
-specific for sdmmc variant:
-- st,sig-dir             : signal direction polarity used for cmd, dat0 dat123.
-- st,neg-edge            : data & command phase relation, generated on
-                           sd clock falling edge.
-- st,use-ckin            : use ckin pin from an external driver to sample
-                           the receive data (example: with voltage
-			   switch transceiver).
-
-Deprecated properties:
-- mmc-cap-mmc-highspeed  : indicates whether MMC is high speed capable.
-- mmc-cap-sd-highspeed   : indicates whether SD is high speed capable.
-
-Example:
-
-sdi0_per1@80126000 {
-	compatible = "arm,pl18x", "arm,primecell";
-	reg = <0x80126000 0x1000>;
-	interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
-
-	dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
-	       <&dma 29 0 0x0>; /* Logical - MemToDev */
-	dma-names = "rx", "tx";
-
-	clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
-	clock-names = "sdi", "apb_pclk";
-
-	max-frequency = <100000000>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-mmc-highspeed;
-	cd-gpios  = <&gpio2 31 0x4>; // 95
-	st,sig-dir-dat0;
-	st,sig-dir-dat2;
-	st,sig-dir-cmd;
-	st,sig-pin-fbclk;
-
-	vmmc-supply = <&ab8500_ldo_aux3_reg>;
-	vqmmc-supply = <&vmmci>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdi0_default_mode>;
-	pinctrl-1 = <&sdi0_sleep_mode>;
-};
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
deleted file mode 100644
index 8a532f4453f2..000000000000
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-* MTK MMC controller
-
-The MTK  MSDC can act as a MMC controller
-to support MMC, SD, and SDIO types of memory cards.
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the msdc driver.
-
-Required properties:
-- compatible: value should be either of the following.
-	"mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
-	"mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
-	"mediatek,mt8183-mmc": for mmc host ip compatible with mt8183
-	"mediatek,mt8516-mmc": for mmc host ip compatible with mt8516
-	"mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
-	"mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
-	"mediatek,mt7622-mmc": for MT7622 SoC
-	"mediatek,mt7623-mmc", "mediatek,mt2701-mmc": for MT7623 SoC
-	"mediatek,mt7620-mmc", for MT7621 SoC (and others)
-
-- reg: physical base address of the controller and length
-- interrupts: Should contain MSDC interrupt number
-- clocks: Should contain phandle for the clock feeding the MMC controller
-- clock-names: Should contain the following:
-	"source" - source clock (required)
-	"hclk" - HCLK which used for host (required)
-	"source_cg" - independent source clock gate (required for MT2712)
-	"bus_clk" - bus clock used for internal register access (required for MT2712 MSDC0/3)
-- pinctrl-names: should be "default", "state_uhs"
-- pinctrl-0: should contain default/high speed pin ctrl
-- pinctrl-1: should contain uhs mode pin ctrl
-- vmmc-supply: power to the Core
-- vqmmc-supply: power to the IO
-
-Optional properties:
-- assigned-clocks: PLL of the source clock
-- assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock
-- hs400-ds-delay: HS400 DS delay setting
-- mediatek,hs200-cmd-int-delay: HS200 command internal delay setting.
-				This field has total 32 stages.
-				The value is an integer from 0 to 31.
-- mediatek,hs400-cmd-int-delay: HS400 command internal delay setting
-				This field has total 32 stages.
-				The value is an integer from 0 to 31.
-- mediatek,hs400-cmd-resp-sel-rising:  HS400 command response sample selection
-				       If present,HS400 command responses are sampled on rising edges.
-				       If not present,HS400 command responses are sampled on falling edges.
-- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc
-		     error caused by stop clock(fifo full)
-		     Valid range = [0:0x7]. if not present, default value is 0.
-		     applied to compatible "mediatek,mt2701-mmc".
-
-Examples:
-mmc0: mmc@11230000 {
-	compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc";
-	reg = <0 0x11230000 0 0x108>;
-	interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
-	vmmc-supply = <&mt6397_vemc_3v3_reg>;
-	vqmmc-supply = <&mt6397_vio18_reg>;
-	clocks = <&pericfg CLK_PERI_MSDC30_0>,
-	         <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
-	clock-names = "source", "hclk";
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc0_pins_default>;
-	pinctrl-1 = <&mmc0_pins_uhs>;
-	assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
-	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
-	hs400-ds-delay = <0x14015>;
-	mediatek,hs200-cmd-int-delay = <26>;
-	mediatek,hs400-cmd-int-delay = <14>;
-	mediatek,hs400-cmd-resp-sel-rising;
-};
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
new file mode 100644
index 000000000000..d8e1e2e9adf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -0,0 +1,258 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mtk-sd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTK MSDC Storage Host Controller Binding
+
+maintainers:
+  - Chaotian Jing <chaotian.jing@mediatek.com>
+  - Wenbin Mei <wenbin.mei@mediatek.com>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-mmc
+          - mediatek,mt2712-mmc
+          - mediatek,mt6779-mmc
+          - mediatek,mt6795-mmc
+          - mediatek,mt7620-mmc
+          - mediatek,mt7622-mmc
+          - mediatek,mt8135-mmc
+          - mediatek,mt8173-mmc
+          - mediatek,mt8183-mmc
+          - mediatek,mt8516-mmc
+      - items:
+          - const: mediatek,mt7623-mmc
+          - const: mediatek,mt2701-mmc
+      - items:
+          - enum:
+              - mediatek,mt8186-mmc
+              - mediatek,mt8188-mmc
+              - mediatek,mt8192-mmc
+              - mediatek,mt8195-mmc
+          - const: mediatek,mt8183-mmc
+
+  reg:
+    minItems: 1
+    items:
+      - description: base register (required).
+      - description: top base register (required for MT8183).
+
+  clocks:
+    description:
+      Should contain phandle for the clock feeding the MMC controller.
+    minItems: 2
+    items:
+      - description: source clock (required).
+      - description: HCLK which used for host (required).
+      - description: independent source clock gate (required for MT2712).
+      - description: bus clock used for internal register access (required for MT2712 MSDC0/3).
+      - description: msdc subsys clock gate (required for MT8192).
+      - description: peripheral bus clock gate (required for MT8192).
+      - description: AXI bus clock gate (required for MT8192).
+      - description: AHB bus clock gate (required for MT8192).
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: source
+      - const: hclk
+      - const: source_cg
+      - const: bus_clk
+      - const: sys_cg
+      - const: pclk_cg
+      - const: axi_cg
+      - const: ahb_cg
+
+  interrupts:
+    description:
+      Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended
+      interrupt is required and be configured as wakeup source irq.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: msdc
+      - const: sdio_wakeup
+
+  pinctrl-names:
+    description:
+      Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin
+      will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this
+      scenario.
+    minItems: 2
+    items:
+      - const: default
+      - const: state_uhs
+      - const: state_eint
+
+  pinctrl-0:
+    description:
+      should contain default/high speed pin ctrl.
+    maxItems: 1
+
+  pinctrl-1:
+    description:
+      should contain uhs mode pin ctrl.
+    maxItems: 1
+
+  pinctrl-2:
+    description:
+      should switch dat1 pin to GPIO mode.
+    maxItems: 1
+
+  assigned-clocks:
+    description:
+      PLL of the source clock.
+    maxItems: 1
+
+  assigned-clock-parents:
+    description:
+      parent of source clock, used for HS400 mode to get 400Mhz source clock.
+    maxItems: 1
+
+  hs400-ds-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HS400 DS delay setting.
+    minimum: 0
+    maximum: 0xffffffff
+
+  mediatek,hs200-cmd-int-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HS200 command internal delay setting.
+      This field has total 32 stages.
+      The value is an integer from 0 to 31.
+    minimum: 0
+    maximum: 31
+
+  mediatek,hs400-cmd-int-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HS400 command internal delay setting.
+      This field has total 32 stages.
+      The value is an integer from 0 to 31.
+    minimum: 0
+    maximum: 31
+
+  mediatek,hs400-cmd-resp-sel-rising:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      HS400 command response sample selection.
+      If present, HS400 command responses are sampled on rising edges.
+      If not present, HS400 command responses are sampled on falling edges.
+
+  mediatek,hs400-ds-dly3:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Gear of the third delay line for DS for input data latch in data
+      pad macro, there are 32 stages from 0 to 31.
+      For different corner IC, the time is different about one step, it is
+      about 100ps.
+      The value is confirmed by doing scan and calibration to find a best
+      value with corner IC and it is valid only for HS400 mode.
+    minimum: 0
+    maximum: 31
+
+  mediatek,latch-ck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Some SoCs do not support enhance_rx, need set correct latch-ck to avoid
+      data crc error caused by stop clock(fifo full) Valid range = [0:0x7].
+      if not present, default value is 0.
+      applied to compatible "mediatek,mt2701-mmc".
+    minimum: 0
+    maximum: 7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: hrst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pinctrl-names
+  - pinctrl-0
+  - pinctrl-1
+  - vmmc-supply
+  - vqmmc-supply
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: mediatek,mt8183-mmc
+then:
+  properties:
+    reg:
+      minItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    mmc0: mmc@11230000 {
+        compatible = "mediatek,mt8173-mmc";
+        reg = <0x11230000 0x1000>;
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+        vmmc-supply = <&mt6397_vemc_3v3_reg>;
+        vqmmc-supply = <&mt6397_vio18_reg>;
+        clocks = <&pericfg CLK_PERI_MSDC30_0>,
+                 <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
+        clock-names = "source", "hclk";
+        pinctrl-names = "default", "state_uhs";
+        pinctrl-0 = <&mmc0_pins_default>;
+        pinctrl-1 = <&mmc0_pins_uhs>;
+        assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+        hs400-ds-delay = <0x14015>;
+        mediatek,hs200-cmd-int-delay = <26>;
+        mediatek,hs400-cmd-int-delay = <14>;
+        mediatek,hs400-cmd-resp-sel-rising;
+    };
+
+    mmc3: mmc@11260000 {
+        compatible = "mediatek,mt8173-mmc";
+        reg = <0x11260000 0x1000>;
+        clock-names = "source", "hclk";
+        clocks = <&pericfg CLK_PERI_MSDC30_3>,
+                 <&topckgen CLK_TOP_MSDC50_2_H_SEL>;
+        interrupt-names = "msdc", "sdio_wakeup";
+        interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>,
+                     <&pio 23 IRQ_TYPE_LEVEL_LOW>;
+        pinctrl-names = "default", "state_uhs", "state_eint";
+        pinctrl-0 = <&mmc2_pins_default>;
+        pinctrl-1 = <&mmc2_pins_uhs>;
+        pinctrl-2 = <&mmc2_pins_eint>;
+        bus-width = <4>;
+        max-frequency = <200000000>;
+        cap-sd-highspeed;
+        sd-uhs-sdr104;
+        keep-power-in-suspend;
+        wakeup-source;
+        cap-sdio-irq;
+        no-mmc;
+        no-sd;
+        non-removable;
+        vmmc-supply = <&sdio_fixed_3v3>;
+        vqmmc-supply = <&mt6397_vgp3_reg>;
+        mmc-pwrseq = <&wifi_pwrseq>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
deleted file mode 100644
index 515addc20070..000000000000
--- a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Freescale MXS MMC controller
-
-The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
-to support MMC, SD, and SDIO types of memory cards.
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the mxsmmc driver.
-
-Required properties:
-- compatible: Should be "fsl,<chip>-mmc".  The supported chips include
-  imx23 and imx28.
-- interrupts: Should contain ERROR interrupt number
-- dmas: DMA specifier, consisting of a phandle to DMA controller node
-  and SSP DMA channel ID.
-  Refer to dma.txt and fsl-mxs-dma.txt for details.
-- dma-names: Must be "rx-tx".
-
-Examples:
-
-ssp0: ssp@80010000 {
-	compatible = "fsl,imx28-mmc";
-	reg = <0x80010000 2000>;
-	interrupts = <96>;
-	dmas = <&dma_apbh 0>;
-	dma-names = "rx-tx";
-	bus-width = <8>;
-};
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
new file mode 100644
index 000000000000..bec8f8c71ff2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS MMC controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
+  to support MMC, SD, and SDIO types of memory cards.
+
+  This file documents differences between the core properties in mmc.txt
+  and the properties used by the mxsmmc driver.
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-mmc
+      - fsl,imx28-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@80010000 {
+        compatible = "fsl,imx28-mmc";
+        reg = <0x80010000 2000>;
+        interrupts = <96>;
+        dmas = <&dma_apbh 0>;
+        dma-names = "rx-tx";
+        bus-width = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
deleted file mode 100644
index 2cf3affa1be7..000000000000
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ /dev/null
@@ -1,117 +0,0 @@
-* NVIDIA Tegra Secure Digital Host Controller
-
-This controller on Tegra family SoCs provides an interface for MMC, SD,
-and SDIO types of memory cards.
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the sdhci-tegra driver.
-
-Required properties:
-- compatible : should be one of:
-  - "nvidia,tegra20-sdhci": for Tegra20
-  - "nvidia,tegra30-sdhci": for Tegra30
-  - "nvidia,tegra114-sdhci": for Tegra114
-  - "nvidia,tegra124-sdhci": for Tegra124 and Tegra132
-  - "nvidia,tegra210-sdhci": for Tegra210
-  - "nvidia,tegra186-sdhci": for Tegra186
-  - "nvidia,tegra194-sdhci": for Tegra194
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - sdhci
-
-Optional properties:
-- power-gpios : Specify GPIOs for power control
-
-Example:
-
-sdhci@c8000200 {
-	compatible = "nvidia,tegra20-sdhci";
-	reg = <0xc8000200 0x200>;
-	interrupts = <47>;
-	clocks = <&tegra_car 14>;
-	resets = <&tegra_car 14>;
-	reset-names = "sdhci";
-	cd-gpios = <&gpio 69 0>; /* gpio PI5 */
-	wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-	power-gpios = <&gpio 155 0>; /* gpio PT3 */
-	bus-width = <8>;
-};
-
-Optional properties for Tegra210, Tegra186 and Tegra194:
-- pinctrl-names, pinctrl-0, pinctrl-1 : Specify pad voltage
-  configurations. Valid pinctrl-names are "sdmmc-3v3" and "sdmmc-1v8"
-  for controllers supporting multiple voltage levels. The order of names
-  should correspond to the pin configuration states in pinctrl-0 and
-  pinctrl-1.
-- pinctrl-names : "sdmmc-3v3-drv" and "sdmmc-1v8-drv" are applicable for
-  Tegra210 where pad config registers are in the pinmux register domain
-  for pull-up-strength and pull-down-strength values configuration when
-  using pads at 3V3 and 1V8 levels.
-- nvidia,only-1-8-v : The presence of this property indicates that the
-  controller operates at a 1.8 V fixed I/O voltage.
-- nvidia,pad-autocal-pull-up-offset-3v3,
-  nvidia,pad-autocal-pull-down-offset-3v3 : Specify drive strength
-  calibration offsets for 3.3 V signaling modes.
-- nvidia,pad-autocal-pull-up-offset-1v8,
-  nvidia,pad-autocal-pull-down-offset-1v8 : Specify drive strength
-  calibration offsets for 1.8 V signaling modes.
-- nvidia,pad-autocal-pull-up-offset-3v3-timeout,
-  nvidia,pad-autocal-pull-down-offset-3v3-timeout : Specify drive
-  strength used as a fallback in case the automatic calibration times
-  out on a 3.3 V signaling mode.
-- nvidia,pad-autocal-pull-up-offset-1v8-timeout,
-  nvidia,pad-autocal-pull-down-offset-1v8-timeout : Specify drive
-  strength used as a fallback in case the automatic calibration times
-  out on a 1.8 V signaling mode.
-- nvidia,pad-autocal-pull-up-offset-sdr104,
-  nvidia,pad-autocal-pull-down-offset-sdr104 : Specify drive strength
-  calibration offsets for SDR104 mode.
-- nvidia,pad-autocal-pull-up-offset-hs400,
-  nvidia,pad-autocal-pull-down-offset-hs400 : Specify drive strength
-  calibration offsets for HS400 mode.
-- nvidia,default-tap : Specify the default inbound sampling clock
-  trimmer value for non-tunable modes.
-- nvidia,default-trim : Specify the default outbound clock trimmer
-  value.
-- nvidia,dqs-trim : Specify DQS trim value for HS400 timing
-
-  Notes on the pad calibration pull up and pulldown offset values:
-    - The property values are drive codes which are programmed into the
-      PD_OFFSET and PU_OFFSET sections of the
-      SDHCI_TEGRA_AUTO_CAL_CONFIG register.
-    - A higher value corresponds to higher drive strength. Please refer
-      to the reference manual of the SoC for correct values.
-    - The SDR104 and HS400 timing specific values are used in
-      corresponding modes if specified.
-
-  Notes on tap and trim values:
-    - The values are used for compensating trace length differences
-      by adjusting the sampling point.
-    - The values are programmed to the Vendor Clock Control Register.
-      Please refer to the reference manual of the SoC for correct
-      values.
-    - The DQS trim values are only used on controllers which support
-      HS400 timing. Only SDMMC4 on Tegra210 and Tegra 186 supports
-      HS400.
-
-Example:
-sdhci@700b0000 {
-	compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
-	reg = <0x0 0x700b0000 0x0 0x200>;
-	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
-	clock-names = "sdhci";
-	resets = <&tegra_car 14>;
-	reset-names = "sdhci";
-	pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
-	pinctrl-0 = <&sdmmc1_3v3>;
-	pinctrl-1 = <&sdmmc1_1v8>;
-	nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
-	nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
-	nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
-	nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
-	status = "disabled";
-};
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml
new file mode 100644
index 000000000000..fe0270207622
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml
@@ -0,0 +1,314 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/nvidia,tegra20-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Secure Digital Host Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  This controller on Tegra family SoCs provides an interface for MMC, SD, and
+  SDIO types of memory cards.
+
+  This file documents differences between the core properties described by
+  mmc-controller.yaml and the properties for the Tegra SDHCI controller.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-sdhci
+          - nvidia,tegra30-sdhci
+          - nvidia,tegra114-sdhci
+          - nvidia,tegra124-sdhci
+          - nvidia,tegra210-sdhci
+          - nvidia,tegra186-sdhci
+          - nvidia,tegra194-sdhci
+
+      - items:
+          - const: nvidia,tegra132-sdhci
+          - const: nvidia,tegra124-sdhci
+
+      - items:
+          - enum:
+              - nvidia,tegra194-sdhci
+              - nvidia,tegra234-sdhci
+          - const: nvidia,tegra186-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: sdhci
+
+  power-gpios:
+    description: specify GPIOs for power control
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  nvidia,default-tap:
+    description: Specify the default inbound sampling clock trimmer value for
+      non-tunable modes.
+
+      The values are used for compensating trace length differences by
+      adjusting the sampling point. The values are programmed to the Vendor
+      Clock Control Register. Please refer to the reference manual of the SoC
+      for correct values.
+
+      The DQS trim values are only used on controllers which support HS400
+      timing. Only SDMMC4 on Tegra210 and Tegra186 supports HS400.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,default-trim:
+    description: Specify the default outbound clock trimmer value.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,dqs-trim:
+    description: Specify DQS trim value for HS400 timing.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-down-offset-1v8:
+    description: Specify drive strength calibration offsets for 1.8 V
+      signaling modes.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-down-offset-1v8-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 1.8 V signaling mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-down-offset-3v3:
+    description: Specify drive strength calibration offsets for 3.3 V
+      signaling modes.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-down-offset-3v3-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 3.3 V signaling mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-down-offset-sdr104:
+    description: Specify drive strength calibration offsets for SDR104 mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-down-offset-hs400:
+    description: Specify drive strength calibration offsets for HS400 mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-up-offset-1v8:
+    description: Specify drive strength calibration offsets for 1.8 V
+      signaling modes.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-up-offset-1v8-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 1.8 V signaling mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-up-offset-3v3:
+    description: Specify drive strength calibration offsets for 3.3 V
+      signaling modes.
+
+      The property values are drive codes which are programmed into the
+      PD_OFFSET and PU_OFFSET sections of the SDHCI_TEGRA_AUTO_CAL_CONFIG
+      register. A higher value corresponds to higher drive strength. Please
+      refer to the reference manual of the SoC for correct values. The SDR104
+      and HS400 timing specific values are used in corresponding modes if
+      specified.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-up-offset-3v3-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 3.3 V signaling mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-up-offset-sdr104:
+    description: Specify drive strength calibration offsets for SDR104 mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-up-offset-hs400:
+    description: Specify drive strength calibration offsets for HS400 mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,only-1-8v:
+    description: The presence of this property indicates that the controller
+      operates at a 1.8 V fixed I/O voltage.
+    $ref: "/schemas/types.yaml#/definitions/flag"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-sdhci
+              - nvidia,tegra30-sdhci
+              - nvidia,tegra114-sdhci
+              - nvidia,tegra124-sdhci
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+    else:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+            - description: timeout clock
+
+        clock-names:
+          items:
+            - const: sdhci
+            - const: tmclk
+      required:
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-sdhci
+    then:
+      properties:
+        pinctrl-names:
+          oneOf:
+            - items:
+                - const: sdmmc-3v3
+                  description: pad configuration for 3.3 V
+                - const: sdmmc-1v8
+                  description: pad configuration for 1.8 V
+                - const: sdmmc-3v3-drv
+                  description: pull-up/down configuration for 3.3 V
+                - const: sdmmc-1v8-drv
+                  description: pull-up/down configuration for 1.8 V
+            - items:
+                - const: sdmmc-3v3-drv
+                  description: pull-up/down configuration for 3.3 V
+                - const: sdmmc-1v8-drv
+                  description: pull-up/down configuration for 1.8 V
+            - items:
+                - const: sdmmc-1v8-drv
+                  description: pull-up/down configuration for 1.8 V
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-sdhci
+              - nvidia,tegra194-sdhci
+    then:
+      properties:
+        pinctrl-names:
+          items:
+            - const: sdmmc-3v3
+              description: pad configuration for 3.3 V
+            - const: sdmmc-1v8
+              description: pad configuration for 1.8 V
+      required:
+        - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@c8000200 {
+        compatible = "nvidia,tegra20-sdhci";
+        reg = <0xc8000200 0x200>;
+        interrupts = <47>;
+        clocks = <&tegra_car 14>;
+        resets = <&tegra_car 14>;
+        reset-names = "sdhci";
+        cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+        wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+        power-gpios = <&gpio 155 0>; /* gpio PT3 */
+        bus-width = <8>;
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@700b0000 {
+        compatible = "nvidia,tegra210-sdhci";
+        reg = <0x700b0000 0x200>;
+        interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+                 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+        clock-names = "sdhci", "tmclk";
+        resets = <&tegra_car 14>;
+        reset-names = "sdhci";
+        pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
+                        "sdmmc-3v3-drv", "sdmmc-1v8-drv";
+        pinctrl-0 = <&sdmmc1_3v3>;
+        pinctrl-1 = <&sdmmc1_1v8>;
+        pinctrl-2 = <&sdmmc1_3v3_drv>;
+        pinctrl-3 = <&sdmmc1_1v8_drv>;
+        nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+        nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+        nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+        nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+        nvidia,default-tap = <0x2>;
+        nvidia,default-trim = <0x4>;
+        assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+                          <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>,
+                          <&tegra_car TEGRA210_CLK_PLL_C4>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+        assigned-clock-rates = <200000000>, <1000000000>, <1000000000>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/orion-sdio.txt b/Documentation/devicetree/bindings/mmc/orion-sdio.txt
deleted file mode 100644
index 10f0818a34c5..000000000000
--- a/Documentation/devicetree/bindings/mmc/orion-sdio.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* Marvell orion-sdio controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the orion-sdio driver.
-
-- compatible: Should be "marvell,orion-sdio"
-- clocks: reference to the clock of the SDIO interface
-
-Example:
-
-	mvsdio@d00d4000 {
-		compatible = "marvell,orion-sdio";
-		reg = <0xd00d4000 0x200>;
-		interrupts = <54>;
-		clocks = <&gateclk 17>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
index 12b40213426d..b0d81ebe0f6e 100644
--- a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
@@ -14,7 +14,13 @@ maintainers:
 
 properties:
   compatible:
-    const: actions,owl-mmc
+    oneOf:
+      - const: actions,owl-mmc
+      - items:
+          - enum:
+              - actions,s500-mmc
+              - actions,s700-mmc
+          - const: actions,owl-mmc
 
   reg:
     maxItems: 1
@@ -43,11 +49,13 @@ required:
   - dmas
   - dma-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     mmc0: mmc@e0330000 {
         compatible = "actions,owl-mmc";
-        reg = <0x0 0xe0330000 0x0 0x4000>;
+        reg = <0xe0330000 0x4000>;
         interrupts = <0 42 4>;
         clocks = <&cmu 56>;
         resets = <&cmu 23>;
diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
deleted file mode 100644
index c064af5838aa..000000000000
--- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Renesas Multi Media Card Interface (MMCIF) Controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the MMCIF device.
-
-
-Required properties:
-
-- compatible: should be "renesas,mmcif-<soctype>", "renesas,sh-mmcif" as a
-  fallback. Examples with <soctype> are:
-	- "renesas,mmcif-r7s72100" for the MMCIF found in r7s72100 SoCs
-	- "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs
-	- "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs
-	- "renesas,mmcif-r8a7743" for the MMCIF found in r8a7743 SoCs
-	- "renesas,mmcif-r8a7744" for the MMCIF found in r8a7744 SoCs
-	- "renesas,mmcif-r8a7745" for the MMCIF found in r8a7745 SoCs
-	- "renesas,mmcif-r8a7778" for the MMCIF found in r8a7778 SoCs
-	- "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs
-	- "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs
-	- "renesas,mmcif-r8a7793" for the MMCIF found in r8a7793 SoCs
-	- "renesas,mmcif-r8a7794" for the MMCIF found in r8a7794 SoCs
-	- "renesas,mmcif-sh73a0" for the MMCIF found in sh73a0 SoCs
-
-- interrupts: Some SoCs have only 1 shared interrupt, while others have either
-  2 or 3 individual interrupts (error, int, card detect). Below is the number
-  of interrupts for each SoC:
-    1: r8a73a4, r8a7743, r8a7744, r8a7745, r8a7778, r8a7790, r8a7791, r8a7793,
-       r8a7794
-    2: r8a7740, sh73a0
-    3: r7s72100
-
-- clocks: reference to the functional clock
-
-- dmas: reference to the DMA channels, one per channel name listed in the
-  dma-names property.
-- dma-names: must contain "tx" for the transmit DMA channel and "rx" for the
-  receive DMA channel.
-- max-frequency: Maximum operating clock frequency, driver uses default clock
-  frequency if it is not set.
-
-
-Example: R8A7790 (R-Car H2) MMCIF0
-
-	mmcif0: mmc@ee200000 {
-		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
-		reg = <0 0xee200000 0 0x80>;
-		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
-		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
-		dma-names = "tx", "rx";
-		max-frequency = <97500000>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml
new file mode 100644
index 000000000000..c36ba561c387
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/renesas,mmcif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Multi Media Card Interface (MMCIF) Controller
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,mmcif-r7s72100 # RZ/A1H
+          - renesas,mmcif-r8a73a4  # R-Mobile APE6
+          - renesas,mmcif-r8a7740  # R-Mobile A1
+          - renesas,mmcif-r8a7742  # RZ/G1H
+          - renesas,mmcif-r8a7743  # RZ/G1M
+          - renesas,mmcif-r8a7744  # RZ/G1N
+          - renesas,mmcif-r8a7745  # RZ/G1E
+          - renesas,mmcif-r8a7778  # R-Car M1A
+          - renesas,mmcif-r8a7790  # R-Car H2
+          - renesas,mmcif-r8a7791  # R-Car M2-W
+          - renesas,mmcif-r8a7793  # R-Car M2-N
+          - renesas,mmcif-r8a7794  # R-Car E2
+          - renesas,mmcif-sh73a0   # SH-Mobile AG5
+      - const: renesas,sh-mmcif
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+  max-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: renesas,mmcif-r7s72100
+then:
+  properties:
+    interrupts:
+      items:
+        - description: Error interrupt
+        - description: Normal operation interrupt
+        - description: Card detection interrupt
+else:
+  if:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - renesas,mmcif-r8a7740
+            - renesas,mmcif-sh73a0
+  then:
+    properties:
+      interrupts:
+        items:
+          - description: Error interrupt
+          - description: Normal operation interrupt
+  else:
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,mmcif-r8a73a4
+              - renesas,mmcif-r8a7778
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    mmcif0: mmc@ee200000 {
+            compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
+            reg = <0xee200000 0x80>;
+            interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 315>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 315>;
+            dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>;
+            dma-names = "tx", "rx", "tx", "rx";
+            max-frequency = <97500000>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt b/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt
deleted file mode 100644
index e6cc47844207..000000000000
--- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt
+++ /dev/null
@@ -1,113 +0,0 @@
-* Renesas SDHI SD/MMC controller
-
-Required properties:
-- compatible: should contain one or more of the following:
-		"renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC
-		"renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC
-		"renesas,sdhi-r7s9210" - SDHI IP on R7S9210 SoC
-		"renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
-		"renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC
-		"renesas,sdhi-r8a7743" - SDHI IP on R8A7743 SoC
-		"renesas,sdhi-r8a7744" - SDHI IP on R8A7744 SoC
-		"renesas,sdhi-r8a7745" - SDHI IP on R8A7745 SoC
-		"renesas,sdhi-r8a774a1" - SDHI IP on R8A774A1 SoC
-		"renesas,sdhi-r8a774b1" - SDHI IP on R8A774B1 SoC
-		"renesas,sdhi-r8a774c0" - SDHI IP on R8A774C0 SoC
-		"renesas,sdhi-r8a77470" - SDHI IP on R8A77470 SoC
-		"renesas,sdhi-mmc-r8a77470" - SDHI/MMC IP on R8A77470 SoC
-		"renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
-		"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
-		"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
-		"renesas,sdhi-r8a7791" - SDHI IP on R8A7791 SoC
-		"renesas,sdhi-r8a7792" - SDHI IP on R8A7792 SoC
-		"renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC
-		"renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC
-		"renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC
-		"renesas,sdhi-r8a7796" - SDHI IP on R8A77960 SoC
-		"renesas,sdhi-r8a77961" - SDHI IP on R8A77961 SoC
-		"renesas,sdhi-r8a77965" - SDHI IP on R8A77965 SoC
-		"renesas,sdhi-r8a77970" - SDHI IP on R8A77970 SoC
-		"renesas,sdhi-r8a77980" - SDHI IP on R8A77980 SoC
-		"renesas,sdhi-r8a77990" - SDHI IP on R8A77990 SoC
-		"renesas,sdhi-r8a77995" - SDHI IP on R8A77995 SoC
-		"renesas,sdhi-shmobile" - a generic sh-mobile SDHI controller
-		"renesas,rcar-gen1-sdhi" - a generic R-Car Gen1 SDHI controller
-		"renesas,rcar-gen2-sdhi" - a generic R-Car Gen2 and RZ/G1 SDHI
-					   (not SDHI/MMC) controller
-		"renesas,rcar-gen3-sdhi" - a generic R-Car Gen3 or RZ/G2
-					   SDHI controller
-
-
-		When compatible with the generic version, nodes must list
-		the SoC-specific version corresponding to the platform
-		first followed by the generic version.
-
-- clocks: Most controllers only have 1 clock source per channel. However, on
-	  some variations of this controller, the internal card detection
-	  logic that exists in this controller is sectioned off to be run by a
-	  separate second clock source to allow the main core clock to be turned
-	  off to save power.
-	  If 2 clocks are specified by the hardware, you must name them as
-	  "core" and "cd". If the controller only has 1 clock, naming is not
-	  required.
-	  Devices which have more than 1 clock are listed below:
-	  2: R7S72100, R7S9210
-
-Optional properties:
-- pinctrl-names: should be "default", "state_uhs"
-- pinctrl-0: should contain default/high speed pin ctrl
-- pinctrl-1: should contain uhs mode pin ctrl
-
-Example: R8A7790 (R-Car H2) SDHI controller nodes
-
-	sdhi0: sd@ee100000 {
-		compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
-		reg = <0 0xee100000 0 0x328>;
-		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 314>;
-		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
-		       <&dmac1 0xcd>, <&dmac1 0xce>;
-		dma-names = "tx", "rx", "tx", "rx";
-		max-frequency = <195000000>;
-		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-		resets = <&cpg 314>;
-	};
-
-	sdhi1: sd@ee120000 {
-		compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
-		reg = <0 0xee120000 0 0x328>;
-		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 313>;
-		dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
-		       <&dmac1 0xc9>, <&dmac1 0xca>;
-		dma-names = "tx", "rx", "tx", "rx";
-		max-frequency = <195000000>;
-		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-		resets = <&cpg 313>;
-	};
-
-	sdhi2: sd@ee140000 {
-		compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
-		reg = <0 0xee140000 0 0x100>;
-		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 312>;
-		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
-		       <&dmac1 0xc1>, <&dmac1 0xc2>;
-		dma-names = "tx", "rx", "tx", "rx";
-		max-frequency = <97500000>;
-		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-		resets = <&cpg 312>;
-	};
-
-	sdhi3: sd@ee160000 {
-		compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
-		reg = <0 0xee160000 0 0x100>;
-		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 311>;
-		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
-		       <&dmac1 0xd3>, <&dmac1 0xd4>;
-		dma-names = "tx", "rx", "tx", "rx";
-		max-frequency = <97500000>;
-		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-		resets = <&cpg 311>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
new file mode 100644
index 000000000000..0424b06cb655
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mmc/renesas,sdhi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas SDHI SD/MMC controller
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: renesas,sdhi-sh73a0  # R-Mobile APE6
+      - items:
+          - const: renesas,sdhi-r7s72100 # RZ/A1H
+      - items:
+          - const: renesas,sdhi-r7s9210 # SH-Mobile AG5
+      - items:
+          - const: renesas,sdhi-r8a73a4 # R-Mobile APE6
+      - items:
+          - const: renesas,sdhi-r8a7740 # R-Mobile A1
+      - items:
+          - enum:
+              - renesas,sdhi-r8a7778 # R-Car M1
+              - renesas,sdhi-r8a7779 # R-Car H1
+          - const: renesas,rcar-gen1-sdhi # R-Car Gen1
+      - items:
+          - enum:
+              - renesas,sdhi-r8a7742  # RZ/G1H
+              - renesas,sdhi-r8a7743  # RZ/G1M
+              - renesas,sdhi-r8a7744  # RZ/G1N
+              - renesas,sdhi-r8a7745  # RZ/G1E
+              - renesas,sdhi-r8a77470 # RZ/G1C
+              - renesas,sdhi-r8a7790  # R-Car H2
+              - renesas,sdhi-r8a7791  # R-Car M2-W
+              - renesas,sdhi-r8a7792  # R-Car V2H
+              - renesas,sdhi-r8a7793  # R-Car M2-N
+              - renesas,sdhi-r8a7794  # R-Car E2
+          - const: renesas,rcar-gen2-sdhi # R-Car Gen2 and RZ/G1
+      - items:
+          - const: renesas,sdhi-mmc-r8a77470 # RZ/G1C (SDHI/MMC IP)
+      - items:
+          - enum:
+              - renesas,sdhi-r8a774a1  # RZ/G2M
+              - renesas,sdhi-r8a774b1  # RZ/G2N
+              - renesas,sdhi-r8a774c0  # RZ/G2E
+              - renesas,sdhi-r8a774e1  # RZ/G2H
+              - renesas,sdhi-r8a7795   # R-Car H3
+              - renesas,sdhi-r8a7796   # R-Car M3-W
+              - renesas,sdhi-r8a77961  # R-Car M3-W+
+              - renesas,sdhi-r8a77965  # R-Car M3-N
+              - renesas,sdhi-r8a77970  # R-Car V3M
+              - renesas,sdhi-r8a77980  # R-Car V3H
+              - renesas,sdhi-r8a77990  # R-Car E3
+              - renesas,sdhi-r8a77995  # R-Car D3
+              - renesas,sdhi-r9a07g043 # RZ/G2UL
+              - renesas,sdhi-r9a07g044 # RZ/G2{L,LC}
+              - renesas,sdhi-r9a07g054 # RZ/V2L
+          - const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2
+      - items:
+          - enum:
+              - renesas,sdhi-r8a779a0  # R-Car V3U
+              - renesas,sdhi-r8a779f0  # R-Car S4-8
+          - const: renesas,rcar-gen4-sdhi # R-Car Gen4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  clocks: true
+
+  clock-names: true
+
+  dmas:
+    minItems: 4
+    maxItems: 4
+
+  dma-names:
+    minItems: 4
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  pinctrl-0:
+    minItems: 1
+    maxItems: 2
+
+  pinctrl-1:
+    maxItems: 1
+
+  pinctrl-names: true
+
+  max-frequency: true
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,sdhi-r9a07g043
+              - renesas,sdhi-r9a07g044
+              - renesas,sdhi-r9a07g054
+    then:
+      properties:
+        clocks:
+          items:
+            - description: IMCLK, SDHI channel main clock1.
+            - description: CLK_HS, SDHI channel High speed clock which operates
+                           4 times that of SDHI channel main clock1.
+            - description: IMCLK2, SDHI channel main clock2. When this clock is
+                           turned off, external SD card detection cannot be
+                           detected.
+            - description: ACLK, SDHI channel bus clock.
+        clock-names:
+          items:
+            - const: core
+            - const: clkh
+            - const: cd
+            - const: aclk
+      required:
+        - clock-names
+        - resets
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,rcar-gen2-sdhi
+                - renesas,rcar-gen3-sdhi
+                - renesas,rcar-gen4-sdhi
+      then:
+        properties:
+          clocks:
+            minItems: 1
+            maxItems: 3
+          clock-names:
+            minItems: 1
+            uniqueItems: true
+            items:
+              - const: core
+              - enum: [ clkh, cd ]
+              - const: cd
+      else:
+        properties:
+          clocks:
+            minItems: 1
+            maxItems: 2
+          clock-names:
+            minItems: 1
+            items:
+              - const: core
+              - const: cd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,sdhi-mmc-r8a77470
+    then:
+      properties:
+        pinctrl-names:
+          items:
+            - const: state_uhs
+    else:
+      properties:
+        pinctrl-names:
+          minItems: 1
+          items:
+            - const: default
+            - const: state_uhs
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,sdhi-r7s72100
+              - renesas,sdhi-r7s9210
+    then:
+      required:
+        - clock-names
+      description:
+        The internal card detection logic that exists in these controllers is
+        sectioned off to be run by a separate second clock source to allow
+        the main core clock to be turned off to save power.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    sdhi0: mmc@ee100000 {
+            compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+            reg = <0xee100000 0x328>;
+            interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 314>;
+            dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>;
+            dma-names = "tx", "rx", "tx", "rx";
+            max-frequency = <195000000>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 314>;
+    };
+
+    sdhi1: mmc@ee120000 {
+             compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+             reg = <0xee120000 0x328>;
+             interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+             clocks = <&cpg CPG_MOD 313>;
+             dmas = <&dmac0 0xc9>, <&dmac0 0xca>, <&dmac1 0xc9>, <&dmac1 0xca>;
+             dma-names = "tx", "rx", "tx", "rx";
+             max-frequency = <195000000>;
+             power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+             resets = <&cpg 313>;
+    };
+
+    sdhi2: mmc@ee140000 {
+             compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+             reg = <0xee140000 0x100>;
+             interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+             clocks = <&cpg CPG_MOD 312>;
+             dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>;
+             dma-names = "tx", "rx", "tx", "rx";
+             max-frequency = <97500000>;
+             power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+             resets = <&cpg 312>;
+     };
+
+     sdhi3: mmc@ee160000 {
+              compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+              reg = <0xee160000 0x100>;
+              interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+              clocks = <&cpg CPG_MOD 311>;
+              dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>;
+              dma-names = "tx", "rx", "tx", "rx";
+              max-frequency = <97500000>;
+              power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+              resets = <&cpg 311>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
index 89c3edd6a728..95f59a5e3576 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/rockchip-dw-mshc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip designware mobile storage host controller device tree bindings
+title: Rockchip designware mobile storage host controller
 
 description:
   Rockchip uses the Synopsys designware mobile storage host controller
@@ -29,22 +29,18 @@ properties:
       - const: rockchip,rk3288-dw-mshc
       - items:
           - enum:
-            # for Rockchip PX30
-            - rockchip,px30-dw-mshc
-            # for Rockchip RK3036
-            - rockchip,rk3036-dw-mshc
-            # for Rockchip RK322x
-            - rockchip,rk3228-dw-mshc
-            # for Rockchip RK3308
-            - rockchip,rk3308-dw-mshc
-            # for Rockchip RK3328
-            - rockchip,rk3328-dw-mshc
-            # for Rockchip RK3368
-            - rockchip,rk3368-dw-mshc
-            # for Rockchip RK3399
-            - rockchip,rk3399-dw-mshc
-            # for Rockchip RV1108
-            - rockchip,rv1108-dw-mshc
+              - rockchip,px30-dw-mshc
+              - rockchip,rk1808-dw-mshc
+              - rockchip,rk3036-dw-mshc
+              - rockchip,rk3128-dw-mshc
+              - rockchip,rk3228-dw-mshc
+              - rockchip,rk3308-dw-mshc
+              - rockchip,rk3328-dw-mshc
+              - rockchip,rk3368-dw-mshc
+              - rockchip,rk3399-dw-mshc
+              - rockchip,rk3568-dw-mshc
+              - rockchip,rv1108-dw-mshc
+              - rockchip,rv1126-dw-mshc
           - const: rockchip,rk3288-dw-mshc
 
   reg:
@@ -76,8 +72,7 @@ properties:
       high speed modes.
 
   rockchip,default-sample-phase:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 360
     default: 0
@@ -87,8 +82,7 @@ properties:
       If not specified 0 deg will be used.
 
   rockchip,desired-num-phases:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 360
     default: 360
@@ -104,6 +98,8 @@ required:
   - clocks
   - clock-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/rk3288-cru.h>
@@ -111,7 +107,7 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
     sdmmc: mmc@ff0c0000 {
       compatible = "rockchip,rk3288-dw-mshc";
-      reg = <0x0 0xff0c0000 0x0 0x4000>;
+      reg = <0xff0c0000 0x4000>;
       interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
       clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
                <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
diff --git a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
new file mode 100644
index 000000000000..fdaa18481aa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/samsung,exynos-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Samsung Exynos SoC specific extensions to the Synopsys Designware Mobile
+  Storage Host Controller
+
+maintainers:
+  - Jaehoon Chung <jh80.chung@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-dw-mshc
+      - samsung,exynos4412-dw-mshc
+      - samsung,exynos5250-dw-mshc
+      - samsung,exynos5420-dw-mshc
+      - samsung,exynos5420-dw-mshc-smu
+      - samsung,exynos7-dw-mshc
+      - samsung,exynos7-dw-mshc-smu
+      - axis,artpec8-dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    description:
+      Handle to "biu" and "ciu" clocks for the
+      bus interface unit clock and the card interface unit clock.
+
+  clock-names:
+    items:
+      - const: biu
+      - const: ciu
+
+  samsung,dw-mshc-ciu-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description:
+      The divider value for the card interface unit (ciu) clock.
+
+  samsung,dw-mshc-ddr-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description:
+      The value of CUI clock phase shift value in transmit mode and CIU clock
+      phase shift value in receive mode for double data rate mode operation.
+      See also samsung,dw-mshc-hs400-timing property.
+
+  samsung,dw-mshc-hs400-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description: |
+      The value of CIU TX and RX clock phase shift value for HS400 mode
+      operation.
+      Valid values for SDR and DDR CIU clock timing::
+        - valid value for tx phase shift and rx phase shift is 0 to 7.
+        - when CIU clock divider value is set to 3, all possible 8 phase shift
+          values can be used.
+        - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
+          phase shift clocks should be 0.
+      If missing, values from samsung,dw-mshc-ddr-timing property are used.
+
+  samsung,dw-mshc-sdr-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description:
+      The value of CIU clock phase shift value in transmit mode and CIU clock
+      phase shift value in receive mode for single data rate mode operation.
+      See also samsung,dw-mshc-hs400-timing property.
+
+  samsung,read-strobe-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      RCLK (Data strobe) delay to control HS400 mode (Latency value for delay
+      line in Read path). If missing, default from hardware is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - samsung,dw-mshc-ddr-timing
+  - samsung,dw-mshc-sdr-timing
+
+allOf:
+  - $ref: "synopsys-dw-mshc-common.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5250-dw-mshc
+              - samsung,exynos5420-dw-mshc
+              - samsung,exynos7-dw-mshc
+              - samsung,exynos7-dw-mshc-smu
+              - axis,artpec8-dw-mshc
+    then:
+      required:
+        - samsung,dw-mshc-ciu-div
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@12220000 {
+        compatible = "samsung,exynos5420-dw-mshc";
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x12220000 0x1000>;
+        clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+        clock-names = "biu", "ciu";
+        fifo-depth = <0x40>;
+        card-detect-delay = <200>;
+        samsung,dw-mshc-ciu-div = <3>;
+        samsung,dw-mshc-sdr-timing = <0 4>;
+        samsung,dw-mshc-ddr-timing = <0 2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
+        bus-width = <4>;
+        cap-sd-highspeed;
+        max-frequency = <200000000>;
+        vmmc-supply = <&ldo19_reg>;
+        vqmmc-supply = <&ldo13_reg>;
+        sd-uhs-sdr50;
+        sd-uhs-sdr104;
+        sd-uhs-ddr50;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
new file mode 100644
index 000000000000..5d873a60f650
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/samsung,s3c6410-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC SDHCI Controller
+
+maintainers:
+  - Jaehoon Chung <jh80.chung@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c6410-sdhci
+      - samsung,exynos4210-sdhci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hsmmc
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos4210-sdhci
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: hsmmc
+            - const: mmc_busclk.2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@12510000 {
+        compatible = "samsung,exynos4210-sdhci";
+        reg = <0x12510000 0x100>;
+        interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+        clock-names = "hsmmc", "mmc_busclk.2";
+        bus-width = <4>;
+        cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
+        pinctrl-names = "default";
+        vmmc-supply = <&ldo21_reg>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
deleted file mode 100644
index 42e0a9afa100..000000000000
--- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Samsung's SDHCI Controller device tree bindings
-
-Samsung's SDHCI controller is used as a connectivity interface with external
-MMC, SD and eMMC storage mediums. This file documents differences between the
-core mmc properties described by mmc.txt and the properties used by the
-Samsung implementation of the SDHCI controller.
-
-Required SoC Specific Properties:
-- compatible: should be one of the following
-  - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci
-    controller.
-  - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci
-    controller.
-
-Required Board Specific Properties:
-- pinctrl-0: Should specify pin control groups used for this controller.
-- pinctrl-names: Should contain only one value - "default".
-
-Example:
-	sdhci@12530000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12530000 0x100>;
-		interrupts = <0 75 0>;
-		bus-width = <4>;
-		cd-gpios = <&gpk2 2 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
-	};
-
-	Note: This example shows both SoC specific and board specific properties
-	in a single device node. The properties can be actually be separated
-	into SoC specific node and board specific node.
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
deleted file mode 100644
index 50e87df47971..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Device Tree Bindings for the SDHCI Controllers present on TI's AM654 SOCs
-
-The bindings follow the mmc[1], clock[2] and interrupt[3] bindings.
-Only deviations are documented here.
-
-  [1] Documentation/devicetree/bindings/mmc/mmc.txt
-  [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
-  [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Required Properties:
-	- compatible: should be one of:
-			"ti,am654-sdhci-5.1": SDHCI on AM654 device.
-			"ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device.
-			"ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device.
-	- reg: Must be two entries.
-		- The first should be the sdhci register space
-		- The second should the subsystem/phy register space
-	- clocks: Handles to the clock inputs.
-	- clock-names: Tuple including "clk_xin" and "clk_ahb"
-	- interrupts: Interrupt specifiers
-	- ti,otap-del-sel: Output Tap Delay select
-
-Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit):
-	- ti,trm-icp: DLL trim select
-	- ti,driver-strength-ohm: driver strength in ohms.
-				  Valid values are 33, 40, 50, 66 and 100 ohms.
-Optional Properties:
-	- ti,strobe-sel: strobe select delay for HS400 speed mode. Default value: 0x0.
-
-Example:
-
-	sdhci0: sdhci@4f80000 {
-		compatible = "ti,am654-sdhci-5.1";
-		reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
-		power-domains = <&k3_pds 47>;
-		clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
-		clock-names = "clk_ahb", "clk_xin";
-		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-		sdhci-caps-mask = <0x80000007 0x0>;
-		mmc-ddr-1_8v;
-		ti,otap-del-sel = <0x2>;
-		ti,trm-icp = <0x8>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
new file mode 100644
index 000000000000..ea9121fb188d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI AM654 MMC Controller
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,am654-sdhci-5.1
+      - const: ti,j721e-sdhci-8bit
+      - const: ti,j721e-sdhci-4bit
+      - const: ti,am64-sdhci-8bit
+      - const: ti,am64-sdhci-4bit
+      - const: ti,am62-sdhci
+      - items:
+          - const: ti,j7200-sdhci-8bit
+          - const: ti,j721e-sdhci-8bit
+      - items:
+          - const: ti,j7200-sdhci-4bit
+          - const: ti,j721e-sdhci-4bit
+
+  reg:
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    description: Handles to input clocks
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: clk_ahb
+      - const: clk_xin
+
+  sdhci-caps-mask: true
+
+  dma-coherent:
+    type: boolean
+
+  # PHY output tap delays:
+  # Used to delay the data valid window and align it to the sampling clock.
+  # Binding needs to be provided for each supported speed mode otherwise the
+  # corresponding mode will be disabled.
+
+  ti,otap-del-sel-legacy:
+    description: Output tap delay for SD/MMC legacy timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-mmc-hs:
+    description: Output tap delay for MMC high speed timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sd-hs:
+    description: Output tap delay for SD high speed timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sdr12:
+    description: Output tap delay for SD UHS SDR12 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sdr25:
+    description: Output tap delay for SD UHS SDR25 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sdr50:
+    description: Output tap delay for SD UHS SDR50 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sdr104:
+    description: Output tap delay for SD UHS SDR104 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-ddr50:
+    description: Output tap delay for SD UHS DDR50 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-ddr52:
+    description: Output tap delay for eMMC DDR52 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-hs200:
+    description: Output tap delay for eMMC HS200 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-hs400:
+    description: Output tap delay for eMMC HS400 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  # PHY input tap delays:
+  # Used to delay the data valid window and align it to the sampling clock for
+  # modes that don't support tuning
+
+  ti,itap-del-sel-legacy:
+    description: Input tap delay for SD/MMC legacy timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-mmc-hs:
+    description: Input tap delay for MMC high speed timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-sd-hs:
+    description: Input tap delay for SD high speed timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-sdr12:
+    description: Input tap delay for SD UHS SDR12 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-sdr25:
+    description: Input tap delay for SD UHS SDR25 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-ddr52:
+    description: Input tap delay for MMC DDR52 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  ti,trm-icp:
+    description: DLL trim select
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,driver-strength-ohm:
+    description: DLL drive strength in ohms
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum:
+      - 33
+      - 40
+      - 50
+      - 66
+      - 100
+
+  ti,strobe-sel:
+    description: strobe select delay for HS400 speed mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  ti,clkbuf-sel:
+    description: Clock Delay Buffer Select
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  ti,fails-without-test-cd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When present, indicates that the CD line is not connected
+      and the controller is required to be forced into Test mode
+      to set the TESTCD bit.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ti,otap-del-sel-legacy
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mmc0: mmc@4f80000 {
+            compatible = "ti,am654-sdhci-5.1";
+            reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
+            power-domains = <&k3_pds 47>;
+            clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
+            clock-names = "clk_ahb", "clk_xin";
+            interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+            sdhci-caps-mask = <0x80000007 0x0>;
+            mmc-ddr-1_8v;
+            ti,otap-del-sel-legacy = <0x0>;
+            ti,otap-del-sel-mmc-hs = <0x0>;
+            ti,otap-del-sel-ddr52 = <0x5>;
+            ti,otap-del-sel-hs200 = <0x5>;
+            ti,otap-del-sel-hs400 = <0x0>;
+            ti,itap-del-sel-legacy = <0x10>;
+            ti,itap-del-sel-mmc-hs = <0xa>;
+            ti,itap-del-sel-ddr52 = <0x3>;
+            ti,trm-icp = <0x8>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
deleted file mode 100644
index fa423c277853..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-* Cadence SD/SDIO/eMMC Host Controller
-
-Required properties:
-- compatible: should be one of the following:
-    "cdns,sd4hc"               - default of the IP
-    "socionext,uniphier-sd4hc" - for Socionext UniPhier SoCs
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: phandle to the input clock.
-
-Optional properties:
-For eMMC configuration, supported speed modes are not indicated by the SDHCI
-Capabilities Register.  Instead, the following properties should be specified
-if supported.  See mmc.txt for details.
-- mmc-ddr-1_8v
-- mmc-ddr-1_2v
-- mmc-hs200-1_8v
-- mmc-hs200-1_2v
-- mmc-hs400-1_8v
-- mmc-hs400-1_2v
-
-Some PHY delays can be configured by following properties.
-PHY DLL input delays:
-They are used to delay the data valid window, and align the window
-to sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
-and it is increased by 2.5ns in each step.
-- cdns,phy-input-delay-sd-highspeed:
-  Value of the delay in the input path for SD high-speed timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-legacy:
-  Value of the delay in the input path for legacy timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-sd-uhs-sdr12:
-  Value of the delay in the input path for SD UHS SDR12 timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-sd-uhs-sdr25:
-  Value of the delay in the input path for SD UHS SDR25 timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-sd-uhs-sdr50:
-  Value of the delay in the input path for SD UHS SDR50 timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-sd-uhs-ddr50:
-  Value of the delay in the input path for SD UHS DDR50 timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-mmc-highspeed:
-  Value of the delay in the input path for MMC high-speed timing
-  Valid range = [0:0x1F].
-- cdns,phy-input-delay-mmc-ddr:
-  Value of the delay in the input path for eMMC high-speed DDR timing
-  Valid range = [0:0x1F].
-
-PHY DLL clock delays:
-Each delay property represents the fraction of the clock period.
-The approximate delay value will be
-(<delay property value>/128)*sdmclk_clock_period.
-- cdns,phy-dll-delay-sdclk:
-  Value of the delay introduced on the sdclk output
-  for all modes except HS200, HS400 and HS400_ES.
-  Valid range = [0:0x7F].
-- cdns,phy-dll-delay-sdclk-hsmmc:
-  Value of the delay introduced on the sdclk output
-  for HS200, HS400 and HS400_ES speed modes.
-  Valid range = [0:0x7F].
-- cdns,phy-dll-delay-strobe:
-  Value of the delay introduced on the dat_strobe input
-  used in HS400 / HS400_ES speed modes.
-  Valid range = [0:0x7F].
-
-Example:
-	emmc: sdhci@5a000000 {
-		compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
-		reg = <0x5a000000 0x400>;
-		interrupts = <0 78 4>;
-		clocks = <&clk 4>;
-		bus-width = <8>;
-		mmc-ddr-1_8v;
-		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
-		cdns,phy-dll-delay-sdclk = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-dove.txt b/Documentation/devicetree/bindings/mmc/sdhci-dove.txt
deleted file mode 100644
index ae9aab9abcd7..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-dove.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* Marvell sdhci-dove controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
-
-- compatible: Should be "marvell,dove-sdhci".
-
-Example:
-
-sdio0: sdio@92000 {
-	compatible = "marvell,dove-sdhci";
-	reg = <0x92000 0x100>;
-	interrupts = <35>;
-};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
deleted file mode 100644
index 7ee639b1af03..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Qualcomm SDHCI controller (sdhci-msm)
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-msm driver.
-
-Required properties:
-- compatible: Should contain a SoC-specific string and a IP version string:
-	version strings:
-		"qcom,sdhci-msm-v4" for sdcc versions less than 5.0
-		"qcom,sdhci-msm-v5" for sdcc version 5.0
-		For SDCC version 5.0.0, MCI registers are removed from SDCC
-		interface and some registers are moved to HC. New compatible
-		string is added to support this change - "qcom,sdhci-msm-v5".
-	full compatible strings with SoC and version:
-		"qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8992-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"
-		"qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"
-		"qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
-	NOTE that some old device tree files may be floating around that only
-	have the string "qcom,sdhci-msm-v4" without the SoC compatible string
-	but doing that should be considered a deprecated practice.
-
-- reg: Base address and length of the register in the following order:
-	- Host controller register map (required)
-	- SD Core register map (required for msm-v4 and below)
-- interrupts: Should contain an interrupt-specifiers for the interrupts:
-	- Host controller interrupt (required)
-- pinctrl-names: Should contain only one value - "default".
-- pinctrl-0: Should specify pin control groups used for this controller.
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
-- clock-names: Should contain the following:
-	"iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
-	"core"	- SDC MMC clock (MCLK) (required)
-	"bus"	- SDCC bus voter clock (optional)
-	"xo"	- TCXO clock (optional)
-	"cal"	- reference clock for RCLK delay calibration (optional)
-	"sleep"	- sleep clock for RCLK delay calibration (optional)
-
-Example:
-
-	sdhc_1: sdhci@f9824900 {
-		compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-		reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-		interrupts = <0 123 0>;
-		bus-width = <8>;
-		non-removable;
-
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
-
-		clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
-		clock-names = "core", "iface";
-	};
-
-	sdhc_2: sdhci@f98a4900 {
-		compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-		reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-		interrupts = <0 125 0>;
-		bus-width = <4>;
-		cd-gpios = <&msmgpio 62 0x1>;
-
-		vmmc-supply = <&pm8941_l21>;
-		vqmmc-supply = <&pm8941_l13>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
-
-		clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
-		clock-names = "core", "iface";
-	};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
new file mode 100644
index 000000000000..a96f143479c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -0,0 +1,258 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mmc/sdhci-msm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm SDHCI controller (sdhci-msm)
+
+maintainers:
+  - Bhupesh Sharma <bhupesh.sharma@linaro.org>
+
+description:
+  Secure Digital Host Controller Interface (SDHCI) present on
+  Qualcomm SOCs supports SD/MMC/SDIO devices.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sdhci-msm-v4
+        deprecated: true
+      - items:
+          - enum:
+              - qcom,apq8084-sdhci
+              - qcom,msm8226-sdhci
+              - qcom,msm8953-sdhci
+              - qcom,msm8974-sdhci
+              - qcom,msm8916-sdhci
+              - qcom,msm8992-sdhci
+              - qcom,msm8994-sdhci
+              - qcom,msm8996-sdhci
+              - qcom,msm8998-sdhci
+          - const: qcom,sdhci-msm-v4 # for sdcc versions less than 5.0
+      - items:
+          - enum:
+              - qcom,qcs404-sdhci
+              - qcom,sc7180-sdhci
+              - qcom,sc7280-sdhci
+              - qcom,sdm630-sdhci
+              - qcom,sdm670-sdhci
+              - qcom,sdm845-sdhci
+              - qcom,sdx55-sdhci
+              - qcom,sdx65-sdhci
+              - qcom,sm6115-sdhci
+              - qcom,sm6125-sdhci
+              - qcom,sm6350-sdhci
+              - qcom,sm8150-sdhci
+              - qcom,sm8250-sdhci
+              - qcom,sm8450-sdhci
+          - const: qcom,sdhci-msm-v5 # for sdcc version 5.0
+
+  reg:
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    minItems: 1
+    maxItems: 4
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Main peripheral bus clock, PCLK/HCLK - AHB Bus clock
+      - description: SDC MMC clock, MCLK
+      - description: TCXO clock
+      - description: clock for Inline Crypto Engine
+      - description: SDCC bus voter clock
+      - description: reference clock for RCLK delay calibration
+      - description: sleep clock for RCLK delay calibration
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: iface
+      - const: core
+      - const: xo
+      - const: ice
+      - const: bus
+      - const: cal
+      - const: sleep
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: hc_irq
+      - const: pwr_irq
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  pinctrl-0:
+    description:
+      Should specify pin control groups used for this controller.
+
+  pinctrl-1:
+    description:
+      Should specify sleep pin control groups used for this controller.
+
+  resets:
+    maxItems: 1
+
+  qcom,ddr-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: platform specific settings for DDR_CONFIG reg.
+
+  qcom,dll-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: platform specific settings for DLL_CONFIG reg.
+
+  iommus:
+    minItems: 1
+    maxItems: 8
+    description: |
+      phandle to apps_smmu node with sid mask.
+
+  interconnects:
+    items:
+      - description: data path, sdhc to ddr
+      - description: config path, cpu to sdhc
+
+  interconnect-names:
+    items:
+      - const: sdhc-ddr
+      - const: cpu-sdhc
+
+  power-domains:
+    description: A phandle to sdhci power domain node
+    maxItems: 1
+
+  mmc-ddr-1_8v: true
+
+  mmc-hs200-1_8v: true
+
+  mmc-hs400-1_8v: true
+
+  bus-width: true
+
+  max-frequency: true
+
+  operating-points-v2: true
+
+patternProperties:
+  '^opp-table(-[a-z0-9]+)?$':
+    if:
+      properties:
+        compatible:
+          const: operating-points-v2
+    then:
+      patternProperties:
+        '^opp-?[0-9]+$':
+          required:
+            - required-opps
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdhci-msm-v4
+    then:
+      properties:
+        reg:
+          minItems: 2
+          items:
+            - description: Host controller register map
+            - description: SD Core register map
+            - description: CQE register map
+            - description: Inline Crypto Engine register map
+        reg-names:
+          minItems: 2
+          items:
+            - const: hc
+            - const: core
+            - const: cqhci
+            - const: ice
+    else:
+      properties:
+        reg:
+          minItems: 1
+          items:
+            - description: Host controller register map
+            - description: CQE register map
+            - description: Inline Crypto Engine register map
+        reg-names:
+          minItems: 1
+          items:
+            - const: hc
+            - const: cqhci
+            - const: ice
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    sdhc_2: mmc@8804000 {
+      compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
+      reg = <0 0x08804000 0 0x1000>;
+
+      interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "hc_irq", "pwr_irq";
+
+      clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+               <&gcc GCC_SDCC2_APPS_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "iface", "core", "xo";
+      iommus = <&apps_smmu 0x4a0 0x0>;
+      qcom,dll-config = <0x0007642c>;
+      qcom,ddr-config = <0x80040868>;
+      power-domains = <&rpmhpd SM8250_CX>;
+
+      operating-points-v2 = <&sdhc2_opp_table>;
+
+      sdhc2_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        opp-19200000 {
+          opp-hz = /bits/ 64 <19200000>;
+          required-opps = <&rpmhpd_opp_min_svs>;
+        };
+
+        opp-50000000 {
+          opp-hz = /bits/ 64 <50000000>;
+          required-opps = <&rpmhpd_opp_low_svs>;
+        };
+
+        opp-100000000 {
+          opp-hz = /bits/ 64 <100000000>;
+          required-opps = <&rpmhpd_opp_svs>;
+        };
+
+        opp-202000000 {
+          opp-hz = /bits/ 64 <202000000>;
+          required-opps = <&rpmhpd_opp_svs_l1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt b/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt
deleted file mode 100644
index ee4253b33be2..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Synopsys DesignWare Cores Mobile Storage Host Controller
-
-Required properties:
-- compatible: should be one of the following:
-    "snps,dwcmshc-sdhci"
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: Array of clocks required for SDHCI; requires at least one for
-    core clock.
-- clock-names: Array of names corresponding to clocks property; shall be
-    "core" for core clock and "bus" for optional bus clock.
-
-Example:
-	sdhci2: sdhci@aa0000 {
-		compatible = "snps,dwcmshc-sdhci";
-		reg = <0xaa0000 0x1000>;
-		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&emmcclk>;
-		bus-width = <8>;
-	}
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
index aeb615ef672a..f91e341e6b36 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
@@ -5,7 +5,11 @@ Refer to mmc.txt for standard MMC bindings.
 For UHS devices which require tuning, the device tree should have a "cpu_thermal" node which maps to the appropriate thermal zone. This is used to get the temperature of the zone during tuning.
 
 Required properties:
-- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
+- compatible: Should be "ti,omap2430-sdhci" for omap2430 controllers
+	      Should be "ti,omap3-sdhci" for omap3 controllers
+	      Should be "ti,omap4-sdhci" for omap4 and ti81 controllers
+	      Should be "ti,omap5-sdhci" for omap5 controllers
+	      Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
 	      Should be "ti,k2g-sdhci" for K2G
 	      Should be "ti,am335-sdhci" for am335x controllers
 	      Should be "ti,am437-sdhci" for am437x controllers
@@ -24,6 +28,9 @@ Optional properties:
 		DMA specifiers listed in dmas. The string naming is to be "tx"
 		and "rx" for TX and RX DMA requests, respectively.
 
+Deprecated properties:
+- ti,non-removable: Compatible with the generic non-removable property
+
 Example:
 	mmc1: mmc@4809c000 {
 		compatible = "ti,dra7-sdhci";
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
deleted file mode 100644
index 3d1b449d6097..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Marvell sdhci-pxa v2/v3 controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
-
-Required properties:
-- compatible: Should be "mrvl,pxav2-mmc", "mrvl,pxav3-mmc" or
-  "marvell,armada-380-sdhci".
-- reg:
-  * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
-    the SDHCI registers.
-
-  * for "marvell,armada-380-sdhci", three register areas. The first
-    one for the SDHCI registers themselves, the second one for the
-    AXI/Mbus bridge registers of the SDHCI unit, the third one for the
-    SDIO3 Configuration register
-- reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory
-  for "marvell,armada-380-sdhci"
-- clocks: Array of clocks required for SDHCI; requires at least one for
-    I/O clock.
-- clock-names: Array of names corresponding to clocks property; shall be
-    "io" for I/O clock and "core" for optional core clock.
-
-Optional properties:
-- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
-
-Example:
-
-sdhci@d4280800 {
-	compatible = "mrvl,pxav3-mmc";
-	reg = <0xd4280800 0x800>;
-	bus-width = <8>;
-	interrupts = <27>;
-	clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
-	clock-names = "io", "core";
-	non-removable;
-	mrvl,clk-delay-cycles = <31>;
-};
-
-sdhci@d8000 {
-	compatible = "marvell,armada-380-sdhci";
-	reg-names = "sdhci", "mbus", "conf-sdio3";
-	reg = <0xd8000 0x1000>,
-		<0xdc000 0x100>;
-		<0x18454 0x4>;
-	interrupts = <0 25 0x4>;
-	clocks = <&gateclk 17>;
-	clock-names = "io";
-	mrvl,clk-delay-cycles = <0x1F>;
-};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
new file mode 100644
index 000000000000..1c87f4218e18
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA SDHCI v2/v3 bindings
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-380-sdhci
+    then:
+      properties:
+        regs:
+          minItems: 3
+        reg-names:
+          minItems: 3
+      required:
+        - reg-names
+    else:
+      properties:
+        regs:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+
+properties:
+  compatible:
+    enum:
+      - mrvl,pxav2-mmc
+      - mrvl,pxav3-mmc
+      - marvell,armada-380-sdhci
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: sdhci
+      - const: mbus
+      - const: conf-sdio3
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: io
+      - const: core
+
+  mrvl,clk-delay-cycles:
+    description: Specify a number of cycles to delay for tuning.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/berlin2.h>
+    mmc@d4280800 {
+        compatible = "mrvl,pxav3-mmc";
+        reg = <0xd4280800 0x800>;
+        bus-width = <8>;
+        interrupts = <27>;
+        clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+        clock-names = "io", "core";
+        non-removable;
+        mrvl,clk-delay-cycles = <31>;
+    };
+  - |
+    mmc@d8000 {
+        compatible = "marvell,armada-380-sdhci";
+        reg-names = "sdhci", "mbus", "conf-sdio3";
+        reg = <0xd8000 0x1000>,
+              <0xdc000 0x100>,
+              <0x18454 0x4>;
+        interrupts = <0 25 0x4>;
+        clocks = <&gateclk 17>;
+        clock-names = "io";
+        mrvl,clk-delay-cycles = <0x1F>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt b/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt
deleted file mode 100644
index dd6ed464bcb8..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* SiRFprimII/marco/atlas6 SDHCI Controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-sirf driver.
-
-Required properties:
-- compatible: sirf,prima2-sdhc
-
-Optional properties:
-- cd-gpios: card detect gpio, with zero flags.
-
-Example:
-
-	sd0: sdhci@56000000 {
-		compatible = "sirf,prima2-sdhc";
-		reg = <0xcd000000 0x100000>;
-		cd-gpios = <&gpio 6 0>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
new file mode 100644
index 000000000000..71f8e726d641
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/snps,dwcmshc-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Binding
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+  - Jisheng Zhang <Jisheng.Zhang@synaptics.com>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-dwcmshc
+      - rockchip,rk3588-dwcmshc
+      - snps,dwcmshc-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: core clock
+      - description: bus clock for optional
+      - description: axi clock for rockchip specified
+      - description: block clock for rockchip specified
+      - description: timer clock for rockchip specified
+
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: bus
+      - const: axi
+      - const: block
+      - const: timer
+
+  rockchip,txclk-tapnum:
+    description: Specify the number of delay for tx sampling.
+    $ref: /schemas/types.yaml#/definitions/uint8
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@fe310000 {
+      compatible = "rockchip,rk3568-dwcmshc";
+      reg = <0xfe310000 0x10000>;
+      interrupts = <0 25 0x4>;
+      clocks = <&cru 17>, <&cru 18>, <&cru 19>, <&cru 20>, <&cru 21>;
+      clock-names = "core", "bus", "axi", "block", "timer";
+      bus-width = <8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
+  - |
+    mmc@aa0000 {
+      compatible = "snps,dwcmshc-sdhci";
+      reg = <0xaa000 0x1000>;
+      interrupts = <0 25 0x4>;
+      clocks = <&cru 17>, <&cru 18>;
+      clock-names = "core", "bus";
+      bus-width = <8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
deleted file mode 100644
index 4897bea7e3f8..000000000000
--- a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Altera SOCFPGA specific extensions to the Synopsys Designware Mobile
-  Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Altera SOCFPGA specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "altr,socfpga-dw-mshc": for Altera's SOCFPGA platform
-
-Example:
-
-	mmc: dwmmc0@ff704000 {
-		compatible = "altr,socfpga-dw-mshc";
-		reg = <0xff704000 0x1000>;
-		interrupts = <0 129 4>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
new file mode 100644
index 000000000000..a586fad0a46b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/socionext,uniphier-sd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier SD/SDIO/eMMC controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    description: version 2.91, 3.1, 3.1.1, respectively
+    enum:
+      - socionext,uniphier-sd-v2.91
+      - socionext,uniphier-sd-v3.1
+      - socionext,uniphier-sd-v3.1.1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+  reset-names:
+    description: |
+      There are three reset signals at maximum
+        host:   mandatory for all variants
+        bridge: exist only for version 2.91
+        hw:     optional. exist if eMMC hw reset line is available
+    oneOf:
+      - const: host
+      - items:
+          - const: host
+          - const: bridge
+      - items:
+          - const: host
+          - const: hw
+      - items:
+          - const: host
+          - const: bridge
+          - const: hw
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-sd-v2.91
+    then:
+      properties:
+        reset-names:
+          contains:
+            const: bridge
+    else:
+      properties:
+        reset-names:
+          not:
+            contains:
+              const: bridge
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - reset-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sd: mmc@5a400000 {
+        compatible = "socionext,uniphier-sd-v2.91";
+        reg = <0x5a400000 0x200>;
+        interrupts = <0 76 4>;
+        pinctrl-names = "default", "uhs";
+        pinctrl-0 = <&pinctrl_sd>;
+        pinctrl-1 = <&pinctrl_sd_uhs>;
+        clocks = <&mio_clk 0>;
+        reset-names = "host", "bridge";
+        resets = <&mio_rst 0>, <&mio_rst 3>;
+        dma-names = "rx-tx";
+        dmas = <&dmac 4>;
+        bus-width = <4>;
+        cap-sd-highspeed;
+        sd-uhs-sdr12;
+        sd-uhs-sdr25;
+        sd-uhs-sdr50;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
index 890d47a87ac5..8dfad89c78a7 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
@@ -27,42 +27,40 @@ properties:
       clock to this at probe time.
 
   fifo-depth:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       The maximum size of the tx/rx fifo's. If this property is not
       specified, the default value of the fifo size is determined from the
       controller registers.
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   card-detect-delay:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
     description:
       Delay in milli-seconds before detecting card after card
       insert event. The default value is 0.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
 
   data-addr:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Override fifo address with value provided by DT. The default FIFO reg
       offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
       by driver. If the controller does not follow this rule, please use
       this property to set fifo address in device tree.
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   fifo-watermark-aligned:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/flag
     description:
       Data done irq is expected if data length is less than
       watermark in PIO mode. But fifo watermark is requested to be aligned
       with data length in some SoC so that TX/RX irq can be generated with
       data done irq. Add this watermark quirk to mark this requirement and
       force fifo watermark setting accordingly.
+    $ref: /schemas/types.yaml#/definitions/flag
 
   dmas:
     maxItems: 1
 
   dma-names:
     const: rx-tx
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
index 05f9f36dcb75..ae6d6fca79e2 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
@@ -15,7 +15,10 @@ maintainers:
 # Everything else is described in the common file
 properties:
   compatible:
-    const: snps,dw-mshc
+    enum:
+      - altr,socfpga-dw-mshc
+      - img,pistachio-dw-mshc
+      - snps,dw-mshc
 
   reg:
     maxItems: 1
@@ -42,6 +45,8 @@ required:
   - clocks
   - clock-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     mmc@12200000 {
@@ -62,7 +67,7 @@ examples:
       cap-mmc-highspeed;
       cap-sd-highspeed;
       card-detect-delay = <200>;
-      clock-freq-min-max = <400000 200000000>;
+      max-frequency = <200000000>;
       clock-frequency = <400000000>;
       data-addr = <0x200>;
       fifo-depth = <0x80>;
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index 4a9145ef15d6..57d077c0b7c1 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -25,10 +25,10 @@ The following are mandatory properties for 66AK2G SoCs only:
 - power-domains:Should contain a phandle to a PM domain provider node
 		and an args specifier containing the MMC device id
 		value. This property is as per the binding,
-		Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+		Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
 - clocks:	Must contain an entry for each entry in clock-names. Should
 		be defined as per the he appropriate clock bindings consumer
-		usage in Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+		usage in Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
 - clock-names:	Shall be "fck" for the functional clock,
 		and "mmchsdb_fck" for the debounce clock.
 
diff --git a/Documentation/devicetree/bindings/mmc/uniphier-sd.txt b/Documentation/devicetree/bindings/mmc/uniphier-sd.txt
deleted file mode 100644
index e1d658755722..000000000000
--- a/Documentation/devicetree/bindings/mmc/uniphier-sd.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-UniPhier SD/eMMC controller
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-sd-v2.91"  - IP version 2.91
-    "socionext,uniphier-sd-v3.1"   - IP version 3.1
-    "socionext,uniphier-sd-v3.1.1" - IP version 3.1.1
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: a single clock specifier of the controller clock.
-- reset-names: should contain the following:
-    "host"   - mandatory for all versions
-    "bridge" - should exist only for "socionext,uniphier-sd-v2.91"
-    "hw"     - should exist if eMMC hw reset line is available
-- resets: a list of reset specifiers, corresponding to the reset-names
-
-Optional properties:
-- pinctrl-names: if present, should contain the following:
-    "default" - should exist for all instances
-    "uhs"     - should exist for SD instance with UHS support
-- pinctrl-0: pin control state for the default mode
-- pinctrl-1: pin control state for the UHS mode
-- dma-names: should be "rx-tx" if present.
-  This property can exist only for "socionext,uniphier-sd-v2.91".
-- dmas: a single DMA channel specifier
-  This property can exist only for "socionext,uniphier-sd-v2.91".
-- bus-width: see mmc.txt
-- cap-sd-highspeed: see mmc.txt
-- cap-mmc-highspeed: see mmc.txt
-- sd-uhs-sdr12: see mmc.txt
-- sd-uhs-sdr25: see mmc.txt
-- sd-uhs-sdr50: see mmc.txt
-- cap-mmc-hw-reset: should exist if reset-names contains "hw". see mmc.txt
-- non-removable: see mmc.txt
-
-Example:
-
-	sd: sdhc@5a400000 {
-		compatible = "socionext,uniphier-sd-v2.91";
-		reg = <0x5a400000 0x200>;
-		interrupts = <0 76 4>;
-		pinctrl-names = "default", "uhs";
-		pinctrl-0 = <&pinctrl_sd>;
-		pinctrl-1 = <&pinctrl_sd_uhs>;
-		clocks = <&mio_clk 0>;
-		reset-names = "host", "bridge";
-		resets = <&mio_rst 0>, <&mio_rst 3>;
-		dma-names = "rx-tx";
-		dmas = <&dmac 4>;
-		bus-width = <4>;
-		cap-sd-highspeed;
-		sd-uhs-sdr12;
-		sd-uhs-sdr25;
-		sd-uhs-sdr50;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
deleted file mode 100644
index 0f59bd5361f5..000000000000
--- a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* ZTE specific extensions to the Synopsys Designware Mobile Storage
-  Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the ZTE specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "zte,zx296718-dw-mshc": for ZX SoCs
-
-Example:
-
-	mmc1: mmc@1110000 {
-		compatible = "zte,zx296718-dw-mshc";
-		reg = <0x01110000 0x1000>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		fifo-depth = <32>;
-		data-addr = <0x200>;
-		fifo-watermark-aligned;
-		bus-width = <4>;
-		clock-frequency = <50000000>;
-		clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
-		clock-names = "biu", "ciu";
-		max-frequency = <50000000>;
-		cap-sdio-irq;
-		cap-sd-highspeed;
-	};
diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
index 5d3fa412aabd..4741864da48e 100644
--- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/allwinner,sun4i-a10-nand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 NAND Controller Device Tree Bindings
+title: Allwinner A10 NAND Controller
 
 allOf:
   - $ref: "nand-controller.yaml"
@@ -75,13 +75,12 @@ patternProperties:
       allwinner,rb:
         description:
           Contains the native Ready/Busy IDs.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - minItems: 1
-            maxItems: 2
-            items:
-              minimum: 0
-              maximum: 1
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 2
+        items:
+          minimum: 0
+          maximum: 1
 
     additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
deleted file mode 100644
index 5794ab1147c1..000000000000
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
-
-This file documents the properties in addition to those available in
-the MTD NAND bindings.
-
-Required properties:
-- compatible : contains one of:
-  - "amlogic,meson-gxl-nfc"
-  - "amlogic,meson-axg-nfc"
-- clocks     :
-	A list of phandle + clock-specifier pairs for the clocks listed
-	in clock-names.
-
-- clock-names: Should contain the following:
-	"core" - NFC module gate clock
-	"device" - device clock from eMMC sub clock controller
-	"rx" - rx clock phase
-	"tx" - tx clock phase
-
-- amlogic,mmc-syscon	: Required for NAND clocks, it's shared with SD/eMMC
-				controller port C
-
-Optional children nodes:
-Children nodes represent the available nand chips.
-
-Other properties:
-see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
-
-Example demonstrate on AXG SoC:
-
-	sd_emmc_c_clkc: mmc@7000 {
-		compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
-		reg = <0x0 0x7000 0x0 0x800>;
-	};
-
-	nand-controller@7800 {
-		compatible = "amlogic,meson-axg-nfc";
-		reg = <0x0 0x7800 0x0 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
-
-		clocks = <&clkc CLKID_SD_EMMC_C>,
-			<&sd_emmc_c_clkc CLKID_MMC_DIV>,
-			<&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
-			<&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
-		clock-names = "core", "device", "rx", "tx";
-		amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_pins>;
-
-		nand@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nand-on-flash-bbt;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
new file mode 100644
index 000000000000..28fb9a7dd70f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/amlogic,meson-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
+
+allOf:
+  - $ref: nand-controller.yaml
+
+maintainers:
+  - liang.yang@amlogic.com
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gxl-nfc
+      - amlogic,meson-axg-nfc
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: nfc
+      - const: emmc
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: device
+
+patternProperties:
+  "^nand@[0-7]$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      nand-ecc-mode:
+        const: hw
+
+      nand-ecc-step-size:
+        const: 1024
+
+      nand-ecc-strength:
+        enum: [8, 16, 24, 30, 40, 50, 60]
+        description: |
+          The ECC configurations that can be supported are as follows.
+            meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
+            meson-axg-nfc 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-clkc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    nand-controller@ffe07800 {
+      compatible = "amlogic,meson-axg-nfc";
+      reg = <0xffe07800 0x100>, <0xffe07000 0x800>;
+      reg-names = "nfc", "emmc";
+      interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&clkc CLKID_SD_EMMC_C>,  <&clkc CLKID_FCLK_DIV2>;
+      clock-names = "core", "device";
+
+      pinctrl-0 = <&nand_pins>;
+      pinctrl-names = "default";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
new file mode 100644
index 000000000000..f013fb976d95
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/arasan,nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arasan NAND Flash Controller with ONFI 3.1 support
+
+allOf:
+  - $ref: "nand-controller.yaml"
+
+maintainers:
+  - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xlnx,zynqmp-nand-controller
+      - const: arasan,nfc-v3p10
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Controller clock
+      - description: NAND bus clock
+
+  clock-names:
+    items:
+      - const: controller
+      - const: bus
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells": true
+  "#size-cells": true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: true
+
+examples:
+  - |
+    nfc: nand-controller@ff100000 {
+        compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10";
+        reg = <0xff100000 0x1000>;
+        clock-names = "controller", "bus";
+        clocks = <&clk200>, <&clk100>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 14 4>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
new file mode 100644
index 000000000000..023f3ef0fa13
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/arm,pl353-nand-r2p1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PL353 NAND Controller
+
+allOf:
+  - $ref: "nand-controller.yaml"
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl353-nand-r2p1
+
+  reg:
+    items:
+      - items:
+          - description: CS with regard to the parent ranges property
+          - description: Offset of the memory region requested by the device
+          - description: Length of the memory region requested by the device
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    smcc: memory-controller@e000e000 {
+      compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+      reg = <0xe000e000 0x0001000>;
+      clock-names = "memclk", "apb_pclk";
+      clocks = <&clkc 11>, <&clkc 44>;
+      ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+                0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+                0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+      #address-cells = <2>;
+      #size-cells = <1>;
+
+      nfc0: nand-controller@0,0 {
+        compatible = "arm,pl353-nand-r2p1";
+        reg = <0 0 0x1000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/arm-versatile.txt b/Documentation/devicetree/bindings/mtd/arm-versatile.txt
deleted file mode 100644
index 4ec28796a3c0..000000000000
--- a/Documentation/devicetree/bindings/mtd/arm-versatile.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Flash device on ARM Versatile board
-
-These flash chips are found in the ARM reference designs like Integrator,
-Versatile, RealView, Versatile Express etc.
-
-They are regular CFI compatible (Intel or AMD extended) flash chips with
-some special write protect/VPP bits that can be controlled by the machine's
-system controller.
-
-Required properties:
-- compatible : must be "arm,versatile-flash", "cfi-flash";
-- reg : memory address for the flash chip
-- bank-width : width in bytes of flash interface.
-
-For the rest of the properties, see mtd-physmap.txt.
-
-The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Example:
-
-flash@34000000 {
-	compatible = "arm,versatile-flash", "cfi-flash";
-	reg = <0x34000000 0x4000000>;
-	bank-width = <4>;
-};
diff --git a/Documentation/devicetree/bindings/mtd/aspeed-smc.txt b/Documentation/devicetree/bindings/mtd/aspeed-smc.txt
deleted file mode 100644
index 49f6528ef547..000000000000
--- a/Documentation/devicetree/bindings/mtd/aspeed-smc.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* Aspeed Firmware Memory controller
-* Aspeed SPI Flash Memory Controller
-
-The Firmware Memory Controller in the Aspeed AST2500 SoC supports
-three chip selects, two of which are always of SPI type and the third
-can be SPI or NOR type flash. These bindings only describe SPI.
-
-The two SPI flash memory controllers in the AST2500 each support two
-chip selects.
-
-Required properties:
-  - compatible : Should be one of
-	"aspeed,ast2400-fmc" for the AST2400 Firmware Memory Controller
-	"aspeed,ast2400-spi" for the AST2400 SPI Flash memory Controller
-	"aspeed,ast2500-fmc" for the AST2500 Firmware Memory Controller
-	"aspeed,ast2500-spi" for the AST2500 SPI flash memory controllers
-
-  - reg : the first contains the control register location and length,
-          the second contains the memory window mapping address and length
-  - #address-cells : must be 1 corresponding to chip select child binding
-  - #size-cells : must be 0 corresponding to chip select child binding
-
-Optional properties:
-  - interrupts : Should contain the interrupt for the dma device if an
-    FMC
-
-The child nodes are the SPI flash modules which must have a compatible
-property as specified in bindings/mtd/jedec,spi-nor.txt
-
-Optionally, the child node can contain properties for SPI mode (may be
-ignored):
-  - spi-max-frequency - max frequency of spi bus
-
-
-Example:
-fmc: fmc@1e620000 {
-	compatible = "aspeed,ast2500-fmc";
-	reg = < 0x1e620000 0x94
-		0x20000000 0x02000000 >;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	interrupts = <19>;
-	flash@0 {
-		reg = < 0 >;
-		compatible = "jedec,spi-nor";
-		/* spi-max-frequency = <>; */
-		/* m25p,fast-read; */
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
deleted file mode 100644
index 82156dc8f304..000000000000
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ /dev/null
@@ -1,184 +0,0 @@
-* Broadcom STB NAND Controller
-
-The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND
-flash chips. It has a memory-mapped register interface for both control
-registers and for its data input/output buffer. On some SoCs, this controller is
-paired with a custom DMA engine (inventively named "Flash DMA") which supports
-basic PROGRAM and READ functions, among other features.
-
-This controller was originally designed for STB SoCs (BCM7xxx) but is now
-available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and
-iProc/Cygnus. Its history includes several similar (but not fully register
-compatible) versions.
-
-Required properties:
-- compatible       : May contain an SoC-specific compatibility string (see below)
-                     to account for any SoC-specific hardware bits that may be
-                     added on top of the base core controller.
-                     In addition, must contain compatibility information about
-                     the core NAND controller, of the following form:
-                     "brcm,brcmnand" and an appropriate version compatibility
-                     string, like "brcm,brcmnand-v7.0"
-                     Possible values:
-                         brcm,brcmnand-v4.0
-                         brcm,brcmnand-v5.0
-                         brcm,brcmnand-v6.0
-                         brcm,brcmnand-v6.1
-                         brcm,brcmnand-v6.2
-                         brcm,brcmnand-v7.0
-                         brcm,brcmnand-v7.1
-                         brcm,brcmnand-v7.2
-                         brcm,brcmnand-v7.3
-                         brcm,brcmnand
-- reg              : the register start and length for NAND register region.
-                     (optional) Flash DMA register range (if present)
-                     (optional) NAND flash cache range (if at non-standard offset)
-- reg-names        : a list of the names corresponding to the previous register
-                     ranges. Should contain "nand" and (optionally)
-                     "flash-dma" and/or "nand-cache".
-- interrupts       : The NAND CTLRDY interrupt and (if Flash DMA is available)
-                     FLASH_DMA_DONE
-- interrupt-names  : May be "nand_ctlrdy" or "flash_dma_done", if broken out as
-                     individual interrupts.
-                     May be "nand", if the SoC has the individual NAND
-                     interrupts multiplexed behind another custom piece of
-                     hardware
-- #address-cells   : <1> - subnodes give the chip-select number
-- #size-cells      : <0>
-
-Optional properties:
-- clock                     : reference to the clock for the NAND controller
-- clock-names               : "nand" (required for the above clock)
-- brcm,nand-has-wp          : Some versions of this IP include a write-protect
-                              (WP) control bit. It is always available on >=
-                              v7.0. Use this property to describe the rare
-                              earlier versions of this core that include WP
-
- -- Additional SoC-specific NAND controller properties --
-
-The NAND controller is integrated differently on the variety of SoCs on which it
-is found. Part of this integration involves providing status and enable bits
-with which to control the 8 exposed NAND interrupts, as well as hardware for
-configuring the endianness of the data bus. On some SoCs, these features are
-handled via standard, modular components (e.g., their interrupts look like a
-normal IRQ chip), but on others, they are controlled in unique and interesting
-ways, sometimes with registers that lump multiple NAND-related functions
-together. The former case can be described simply by the standard interrupts
-properties in the main controller node. But for the latter exceptional cases,
-we define additional 'compatible' properties and associated register resources within the NAND controller node above.
-
- - compatible: Can be one of several SoC-specific strings. Each SoC may have
-   different requirements for its additional properties, as described below each
-   bullet point below.
-
-   * "brcm,nand-bcm63138"
-     - reg: (required) the 'NAND_INT_BASE' register range, with separate status
-       and enable registers
-     - reg-names: (required) "nand-int-base"
-
-   * "brcm,nand-bcm6368"
-     - compatible: should contain "brcm,nand-bcm<soc>", "brcm,nand-bcm6368"
-     - reg: (required) the 'NAND_INTR_BASE' register range, with combined status
-       and enable registers, and boot address registers
-     - reg-names: (required) "nand-int-base"
-
-   * "brcm,nand-iproc"
-     - reg: (required) the "IDM" register range, for interrupt enable and APB
-       bus access endianness configuration, and the "EXT" register range,
-       for interrupt status/ack.
-     - reg-names: (required) a list of the names corresponding to the previous
-       register ranges. Should contain "iproc-idm" and "iproc-ext".
-
-
-* NAND chip-select
-
-Each controller (compatible: "brcm,brcmnand") may contain one or more subnodes
-to represent enabled chip-selects which (may) contain NAND flash chips. Their
-properties are as follows.
-
-Required properties:
-- compatible                : should contain "brcm,nandcs"
-- reg                       : a single integer representing the chip-select
-                              number (e.g., 0, 1, 2, etc.)
-- #address-cells            : see partition.txt
-- #size-cells               : see partition.txt
-
-Optional properties:
-- nand-ecc-strength         : see nand-controller.yaml
-- nand-ecc-step-size        : must be 512 or 1024. See nand-controller.yaml
-- nand-on-flash-bbt         : boolean, to enable the on-flash BBT for this
-                              chip-select. See nand-controller.yaml
-- brcm,nand-oob-sector-size : integer, to denote the spare area sector size
-                              expected for the ECC layout in use. This size, in
-                              addition to the strength and step-size,
-                              determines how the hardware BCH engine will lay
-                              out the parity bytes it stores on the flash.
-                              This property can be automatically determined by
-                              the flash geometry (particularly the NAND page
-                              and OOB size) in many cases, but when booting
-                              from NAND, the boot controller has only a limited
-                              number of available options for its default ECC
-                              layout.
-
-Each nandcs device node may optionally contain sub-nodes describing the flash
-partition mapping. See partition.txt for more detail.
-
-
-Example:
-
-nand@f0442800 {
-	compatible = "brcm,brcmnand-v7.0", "brcm,brcmnand";
-	reg = <0xF0442800 0x600>,
-	      <0xF0443000 0x100>;
-	reg-names = "nand", "flash-dma";
-	interrupt-parent = <&hif_intr2_intc>;
-	interrupts = <24>, <4>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nandcs@1 {
-		compatible = "brcm,nandcs";
-		reg = <1>; // Chip select 1
-		nand-on-flash-bbt;
-		nand-ecc-strength = <12>;
-		nand-ecc-step-size = <512>;
-
-		// Partitions
-		#address-cells = <1>;  // <2>, for 64-bit offset
-		#size-cells = <1>;     // <2>, for 64-bit length
-		flash0.rootfs@0 {
-			reg = <0 0x10000000>;
-		};
-		flash0@0 {
-			reg = <0 0>; // MTDPART_SIZ_FULL
-		};
-		flash0.kernel@10000000 {
-			reg = <0x10000000 0x400000>;
-		};
-	};
-};
-
-nand@10000200 {
-	compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368",
-		"brcm,brcmnand-v4.0", "brcm,brcmnand";
-	reg = <0x10000200 0x180>,
-	      <0x10000600 0x200>,
-	      <0x100000b0 0x10>;
-	reg-names = "nand", "nand-cache", "nand-int-base";
-	interrupt-parent = <&periph_intc>;
-	interrupts = <50>;
-	clocks = <&periph_clk 20>;
-	clock-names = "nand";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand0: nandcs@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <1>;
-		nand-ecc-step-size = <512>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
new file mode 100644
index 000000000000..dd5a64969e37
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
@@ -0,0 +1,234 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/brcm,brcmnand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB NAND Controller
+
+maintainers:
+  - Brian Norris <computersforpeace@gmail.com>
+  - Kamal Dasu <kdasu.kdev@gmail.com>
+
+description: |
+  The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND
+  flash chips. It has a memory-mapped register interface for both control
+  registers and for its data input/output buffer. On some SoCs, this controller
+  is paired with a custom DMA engine (inventively named "Flash DMA") which
+  supports basic PROGRAM and READ functions, among other features.
+
+  This controller was originally designed for STB SoCs (BCM7xxx) but is now
+  available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and
+  iProc/Cygnus. Its history includes several similar (but not fully register
+  compatible) versions.
+
+  -- Additional SoC-specific NAND controller properties --
+
+  The NAND controller is integrated differently on the variety of SoCs on which
+  it is found. Part of this integration involves providing status and enable
+  bits with which to control the 8 exposed NAND interrupts, as well as hardware
+  for configuring the endianness of the data bus. On some SoCs, these features
+  are handled via standard, modular components (e.g., their interrupts look like
+  a normal IRQ chip), but on others, they are controlled in unique and
+  interesting ways, sometimes with registers that lump multiple NAND-related
+  functions together. The former case can be described simply by the standard
+  interrupts properties in the main controller node. But for the latter
+  exceptional cases, we define additional 'compatible' properties and associated
+  register resources within the NAND controller node above.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,brcmnand-v2.1
+              - brcm,brcmnand-v2.2
+              - brcm,brcmnand-v4.0
+              - brcm,brcmnand-v5.0
+              - brcm,brcmnand-v6.0
+              - brcm,brcmnand-v6.1
+              - brcm,brcmnand-v6.2
+              - brcm,brcmnand-v7.0
+              - brcm,brcmnand-v7.1
+              - brcm,brcmnand-v7.2
+              - brcm,brcmnand-v7.3
+          - const: brcm,brcmnand
+      - description: BCM63138 SoC-specific NAND controller
+        items:
+          - const: brcm,nand-bcm63138
+          - enum:
+              - brcm,brcmnand-v7.0
+              - brcm,brcmnand-v7.1
+          - const: brcm,brcmnand
+      - description: iProc SoC-specific NAND controller
+        items:
+          - const: brcm,nand-iproc
+          - const: brcm,brcmnand-v6.1
+          - const: brcm,brcmnand
+      - description: BCM63168 SoC-specific NAND controller
+        items:
+          - const: brcm,nand-bcm63168
+          - const: brcm,nand-bcm6368
+          - const: brcm,brcmnand-v4.0
+          - const: brcm,brcmnand
+
+  reg:
+    minItems: 1
+    maxItems: 6
+
+  reg-names:
+    minItems: 1
+    maxItems: 6
+    items:
+      enum: [ nand, flash-dma, flash-edu, nand-cache, nand-int-base, iproc-idm, iproc-ext ]
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: NAND CTLRDY interrupt
+      - description: FLASH_DMA_DONE if flash DMA is available
+      - description: FLASH_EDU_DONE if EDU is available
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: nand_ctlrdy
+      - const: flash_dma_done
+      - const: flash_edu_done
+
+  clocks:
+    maxItems: 1
+    description: reference to the clock for the NAND controller
+
+  clock-names:
+    const: nand
+
+  brcm,nand-has-wp:
+    description: >
+      Some versions of this IP include a write-protect
+      (WP) control bit. It is always available on >=
+      v7.0. Use this property to describe the rare
+      earlier versions of this core that include WP
+    type: boolean
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    properties:
+      compatible:
+        const: brcm,nandcs
+
+      nand-ecc-step-size:
+        enum: [ 512, 1024 ]
+
+      brcm,nand-oob-sector-size:
+        description: |
+          integer, to denote the spare area sector size
+          expected for the ECC layout in use. This size, in
+          addition to the strength and step-size,
+          determines how the hardware BCH engine will lay
+          out the parity bytes it stores on the flash.
+          This property can be automatically determined by
+          the flash geometry (particularly the NAND page
+          and OOB size) in many cases, but when booting
+          from NAND, the boot controller has only a limited
+          number of available options for its default ECC
+          layout.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+allOf:
+  - $ref: nand-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nand-bcm63138
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: nand
+            - const: nand-int-base
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nand-bcm6368
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: nand
+            - const: nand-int-base
+            - const: nand-cache
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nand-iproc
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: nand
+            - const: iproc-idm
+            - const: iproc-ext
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+
+examples:
+  - |
+    nand-controller@f0442800 {
+            compatible = "brcm,brcmnand-v7.0", "brcm,brcmnand";
+            reg = <0xf0442800 0x600>,
+                  <0xf0443000 0x100>;
+            reg-names = "nand", "flash-dma";
+            interrupt-parent = <&hif_intr2_intc>;
+            interrupts = <24>, <4>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            nand@1 {
+                    compatible = "brcm,nandcs";
+                    reg = <1>; // Chip select 1
+                    nand-on-flash-bbt;
+                    nand-ecc-strength = <12>;
+                    nand-ecc-step-size = <512>;
+
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+            };
+    };
+  - |
+    nand-controller@10000200 {
+            compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368",
+                         "brcm,brcmnand-v4.0", "brcm,brcmnand";
+            reg = <0x10000200 0x180>,
+                  <0x100000b0 0x10>,
+                  <0x10000600 0x200>;
+            reg-names = "nand", "nand-int-base", "nand-cache";
+            interrupt-parent = <&periph_intc>;
+            interrupts = <50>;
+            clocks = <&periph_clk 20>;
+            clock-names = "nand";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            nand@0 {
+                    compatible = "brcm,nandcs";
+                    reg = <0>;
+                    nand-on-flash-bbt;
+                    nand-ecc-strength = <1>;
+                    nand-ecc-step-size = <512>;
+
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
deleted file mode 100644
index 945be7d5b236..000000000000
--- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Cadence Quad SPI controller
-
-Required properties:
-- compatible : should be one of the following:
-	Generic default - "cdns,qspi-nor".
-	For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
-	For TI AM654 SoC  - "ti,am654-ospi", "cdns,qspi-nor".
-- reg : Contains two entries, each of which is a tuple consisting of a
-	physical address and length. The first entry is the address and
-	length of the controller register set. The second entry is the
-	address and length of the QSPI Controller data area.
-- interrupts : Unit interrupt specifier for the controller interrupt.
-- clocks : phandle to the Quad SPI clock.
-- cdns,fifo-depth : Size of the data FIFO in words.
-- cdns,fifo-width : Bus width of the data FIFO in bytes.
-- cdns,trigger-address : 32-bit indirect AHB trigger address.
-
-Optional properties:
-- cdns,is-decoded-cs : Flag to indicate whether decoder is used or not.
-- cdns,rclk-en : Flag to indicate that QSPI return clock is used to latch
-  the read data rather than the QSPI clock. Make sure that QSPI return
-  clock is populated on the board before using this property.
-
-Optional subnodes:
-Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
-custom properties:
-- cdns,read-delay : Delay for read capture logic, in clock cycles
-- cdns,tshsl-ns : Delay in nanoseconds for the length that the master
-                  mode chip select outputs are de-asserted between
-		  transactions.
-- cdns,tsd2d-ns : Delay in nanoseconds between one chip select being
-                  de-activated and the activation of another.
-- cdns,tchsh-ns : Delay in nanoseconds between last bit of current
-                  transaction and deasserting the device chip select
-		  (qspi_n_ss_out).
-- cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low
-                  and first bit transfer.
-- resets	: Must contain an entry for each entry in reset-names.
-		  See ../reset/reset.txt for details.
-- reset-names	: Must include either "qspi" and/or "qspi-ocp".
-
-Example:
-
-	qspi: spi@ff705000 {
-		compatible = "cdns,qspi-nor";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xff705000 0x1000>,
-		      <0xffa00000 0x1000>;
-		interrupts = <0 151 4>;
-		clocks = <&qspi_clk>;
-		cdns,is-decoded-cs;
-		cdns,fifo-depth = <128>;
-		cdns,fifo-width = <4>;
-		cdns,trigger-address = <0x00000000>;
-		resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
-		reset-names = "qspi", "qspi-ocp";
-
-		flash0: n25q00@0 {
-			...
-			cdns,read-delay = <4>;
-			cdns,tshsl-ns = <50>;
-			cdns,tsd2d-ns = <50>;
-			cdns,tchsh-ns = <4>;
-			cdns,tslch-ns = <4>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mtd/common.txt b/Documentation/devicetree/bindings/mtd/common.txt
deleted file mode 100644
index fc068b923d7a..000000000000
--- a/Documentation/devicetree/bindings/mtd/common.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* Common properties of all MTD devices
-
-Optional properties:
-- label: user-defined MTD device name. Can be used to assign user
-  friendly names to MTD devices (instead of the flash model or flash
-  controller based name) in order to ease flash device identification
-  and/or describe what they are used for.
-
-Example:
-
-	flash@0 {
-		label = "System-firmware";
-
-		/* flash type specific properties */
-	};
diff --git a/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt b/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt
deleted file mode 100644
index 3fa1b34d69ad..000000000000
--- a/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Flash device on Cortina Systems Gemini SoC
-
-This flash is regular CFI compatible (Intel or AMD extended) flash chips with
-some special bits that can be controlled by the machine's system controller.
-
-Required properties:
-- compatible : must be "cortina,gemini-flash", "cfi-flash";
-- reg : memory address for the flash chip
-- syscon : must be a phandle to the system controller
-- bank-width : width in bytes of flash interface, should be <2>
-
-For the rest of the properties, see mtd-physmap.txt.
-
-The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Example:
-
-flash@30000000 {
-	compatible = "cortina,gemini-flash", "cfi-flash";
-	reg = <0x30000000 0x01000000>;
-	syscon = <&syscon>;
-	bank-width = <2>;
-};
diff --git a/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt b/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt
deleted file mode 100644
index ad42f4db32f1..000000000000
--- a/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Bindings for HyperFlash NOR flash chips compliant with Cypress HyperBus
-specification and supports Cypress CFI specification 1.5 command set.
-
-Required properties:
-- compatible : "cypress,hyperflash", "cfi-flash" for HyperFlash NOR chips
-- reg : Address of flash's memory map
-
-Example:
-
-	flash@0 {
-		compatible = "cypress,hyperflash", "cfi-flash";
-		reg = <0x0 0x4000000>;
-	};
diff --git a/Documentation/devicetree/bindings/mtd/davinci-nand.txt b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
index cfb18abe6001..edebeae1f5b3 100644
--- a/Documentation/devicetree/bindings/mtd/davinci-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
@@ -4,8 +4,8 @@ This file provides information, what the device node for the davinci/keystone
 NAND interface contains.
 
 Documentation:
-Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
-Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
+Davinci DM646x - https://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
+Kestone - https://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
new file mode 100644
index 000000000000..1307ed7e7fc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/denali,nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Denali NAND controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - altr,socfpga-denali-nand
+      - socionext,uniphier-denali-nand-v5a
+      - socionext,uniphier-denali-nand-v5b
+
+  reg-names:
+    description: |
+      There are two register regions:
+        nand_data:  host data/command interface
+        denali_reg: register interface
+    items:
+      - const: nand_data
+      - const: denali_reg
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    description: |
+      There are three clocks:
+        nand:   controller core clock
+        nand_x: bus interface clock
+        ecc:    ECC circuit clock
+    items:
+      - const: nand
+      - const: nand_x
+      - const: ecc
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  reset-names:
+    description: |
+      There are two optional resets:
+        nand: controller core reset
+        reg:  register reset
+    oneOf:
+      - items:
+          - const: nand
+          - const: reg
+      - const: nand
+      - const: reg
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+allOf:
+  - $ref: nand-controller.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: altr,socfpga-denali-nand
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          type: object
+          properties:
+            nand-ecc-strength:
+              enum:
+                - 8
+                - 15
+            nand-ecc-step-size:
+              enum:
+                - 512
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-denali-nand-v5a
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          type: object
+          properties:
+            nand-ecc-strength:
+              enum:
+                - 8
+                - 16
+                - 24
+            nand-ecc-step-size:
+              enum:
+                - 1024
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-denali-nand-v5b
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          type: object
+          properties:
+            nand-ecc-strength:
+              enum:
+                - 8
+                - 16
+            nand-ecc-step-size:
+              enum:
+                - 1024
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nand-controller@ff900000 {
+        compatible = "altr,socfpga-denali-nand";
+        reg-names = "nand_data", "denali_reg";
+        reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
+        interrupts = <0 144 4>;
+        clock-names = "nand", "nand_x", "ecc";
+        clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+        reset-names = "nand", "reg";
+        resets = <&nand_rst>, <&nand_reg_rst>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+                reg = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
deleted file mode 100644
index 98916a84bbf6..000000000000
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Denali NAND controller
-
-Required properties:
-  - compatible : should be one of the following:
-      "altr,socfpga-denali-nand"            - for Altera SOCFPGA
-      "socionext,uniphier-denali-nand-v5a"  - for Socionext UniPhier (v5a)
-      "socionext,uniphier-denali-nand-v5b"  - for Socionext UniPhier (v5b)
-  - reg : should contain registers location and length for data and reg.
-  - reg-names: Should contain the reg names "nand_data" and "denali_reg"
-  - #address-cells: should be 1. The cell encodes the chip select connection.
-  - #size-cells : should be 0.
-  - interrupts : The interrupt number.
-  - clocks: should contain phandle of the controller core clock, the bus
-    interface clock, and the ECC circuit clock.
-  - clock-names: should contain "nand", "nand_x", "ecc"
-
-Optional properties:
-  - resets: may contain phandles to the controller core reset, the register
-    reset
-  - reset-names: may contain "nand", "reg"
-
-Sub-nodes:
-  Sub-nodes represent available NAND chips.
-
-  Required properties:
-    - reg: should contain the bank ID of the controller to which each chip
-      select is connected.
-
-  Optional properties:
-    - nand-ecc-step-size: see nand-controller.yaml for details.
-      If present, the value must be
-        512        for "altr,socfpga-denali-nand"
-        1024       for "socionext,uniphier-denali-nand-v5a"
-        1024       for "socionext,uniphier-denali-nand-v5b"
-    - nand-ecc-strength: see nand-controller.yaml for details. Valid values are:
-        8, 15      for "altr,socfpga-denali-nand"
-        8, 16, 24  for "socionext,uniphier-denali-nand-v5a"
-        8, 16      for "socionext,uniphier-denali-nand-v5b"
-    - nand-ecc-maximize: see nand-controller.yaml for details
-
-The chip nodes may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Examples:
-
-nand: nand@ff900000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "altr,socfpga-denali-nand";
-	reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
-	reg-names = "nand_data", "denali_reg";
-	clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
-	clock-names = "nand", "nand_x", "ecc";
-	resets = <&nand_rst>, <&nand_reg_rst>;
-	reset-names = "nand", "reg";
-	interrupts = <0 144 4>;
-
-	nand@0 {
-		reg = <0>;
-	}
-};
diff --git a/Documentation/devicetree/bindings/mtd/elm.txt b/Documentation/devicetree/bindings/mtd/elm.txt
deleted file mode 100644
index 59ddc61c1076..000000000000
--- a/Documentation/devicetree/bindings/mtd/elm.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Error location module
-
-Required properties:
-- compatible: Must be "ti,am3352-elm"
-- reg: physical base address and size of the registers map.
-- interrupts: Interrupt number for the elm.
-
-Optional properties:
-- ti,hwmods: Name of the hwmod associated to the elm
-
-Example:
-elm: elm@0 {
-	compatible = "ti,am3352-elm";
-	reg = <0x48080000 0x2000>;
-	interrupts = <4>;
-};
diff --git a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
index fce4894f5a98..25f07c1f9e44 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
@@ -7,14 +7,16 @@ Required properties:
 - fsl,upm-cmd-offset : UPM pattern offset for the command latch.
 
 Optional properties:
-- fsl,upm-wait-flags : add chip-dependent short delays after running the
-	UPM pattern (0x1), after writing a data byte (0x2) or after
-	writing out a buffer (0x4).
 - fsl,upm-addr-line-cs-offsets : address offsets for multi-chip support.
 	The corresponding address lines are used to select the chip.
 - gpios : may specify optional GPIOs connected to the Ready-Not-Busy pins
 	(R/B#). For multi-chip devices, "n" GPIO definitions are required
 	according to the number of chips.
+
+Deprecated properties:
+- fsl,upm-wait-flags : add chip-dependent short delays after running the
+	UPM pattern (0x1), after writing a data byte (0x2) or after
+	writing out a buffer (0x4).
 - chip-delay : chip dependent delay for transferring data from array to
 	read registers (tR). Required if property "gpios" is not used
 	(R/B# pins not connected).
@@ -52,8 +54,6 @@ upm@3,0 {
 	fsl,upm-cmd-offset = <0x08>;
 	/* Multi-chip NAND device */
 	fsl,upm-addr-line-cs-offsets = <0x0 0x200>;
-	fsl,upm-wait-flags = <0x5>;
-	chip-delay = <25>; // in micro-seconds
 
 	nand@0 {
 		#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
deleted file mode 100644
index 44919d48d241..000000000000
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Device tree bindings for GPMC connected NANDs
-
-GPMC connected NAND (found on OMAP boards) are represented as child nodes of
-the GPMC controller with a name of "nand".
-
-All timing relevant properties as well as generic gpmc child properties are
-explained in a separate documents - please refer to
-Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
-
-For NAND specific properties such as ECC modes or bus width, please refer to
-Documentation/devicetree/bindings/mtd/nand-controller.yaml
-
-
-Required properties:
-
- - compatible:	"ti,omap2-nand"
- - reg:		range id (CS number), base offset and length of the
-		NAND I/O space
- - interrupts:	Two interrupt specifiers, one for fifoevent, one for termcount.
-
-Optional properties:
-
- - nand-bus-width: 		Set this numeric value to 16 if the hardware
-				is wired that way. If not specified, a bus
-				width of 8 is assumed.
-
- - ti,nand-ecc-opt:		A string setting the ECC layout to use. One of:
-		"sw"		1-bit Hamming ecc code via software
-		"hw"		<deprecated> use "ham1" instead
-		"hw-romcode"	<deprecated> use "ham1" instead
-		"ham1"		1-bit Hamming ecc code
-		"bch4"		4-bit BCH ecc code
-		"bch8"		8-bit BCH ecc code
-		"bch16"		16-bit BCH ECC code
-		Refer below "How to select correct ECC scheme for your device ?"
-
- - ti,nand-xfer-type:		A string setting the data transfer type. One of:
-
-		"prefetch-polled"	Prefetch polled mode (default)
-		"polled"		Polled mode, without prefetch
-		"prefetch-dma"		Prefetch enabled DMA mode
-		"prefetch-irq"		Prefetch enabled irq mode
-
- - elm_id:	<deprecated> use "ti,elm-id" instead
- - ti,elm-id:	Specifies phandle of the ELM devicetree node.
-		ELM is an on-chip hardware engine on TI SoC which is used for
-		locating ECC errors for BCHx algorithms. SoC devices which have
-		ELM hardware engines should specify this device node in .dtsi
-		Using ELM for ECC error correction frees some CPU cycles.
- - rb-gpios:	GPIO specifier for the ready/busy# pin.
-
-For inline partition table parsing (optional):
-
- - #address-cells: should be set to 1
- - #size-cells: should be set to 1
-
-Example for an AM33xx board:
-
-	gpmc: gpmc@50000000 {
-		compatible = "ti,am3352-gpmc";
-		ti,hwmods = "gpmc";
-		reg = <0x50000000 0x36c>;
-		interrupts = <100>;
-		gpmc,num-cs = <8>;
-		gpmc,num-waitpins = <2>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x1000000>;	/* CS0 space, 16MB */
-		elm_id = <&elm>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		nand@0,0 {
-			compatible = "ti,omap2-nand";
-			reg = <0 0 4>;		/* CS0, offset 0, NAND I/O window 4 */
-			interrupt-parent = <&gpmc>;
-			interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>;
-			nand-bus-width = <16>;
-			ti,nand-ecc-opt = "bch8";
-			ti,nand-xfer-type = "polled";
-			rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-
-			gpmc,sync-clk-ps = <0>;
-			gpmc,cs-on-ns = <0>;
-			gpmc,cs-rd-off-ns = <44>;
-			gpmc,cs-wr-off-ns = <44>;
-			gpmc,adv-on-ns = <6>;
-			gpmc,adv-rd-off-ns = <34>;
-			gpmc,adv-wr-off-ns = <44>;
-			gpmc,we-off-ns = <40>;
-			gpmc,oe-off-ns = <54>;
-			gpmc,access-ns = <64>;
-			gpmc,rd-cycle-ns = <82>;
-			gpmc,wr-cycle-ns = <82>;
-			gpmc,wr-access-ns = <40>;
-			gpmc,wr-data-mux-bus-ns = <0>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/* partitions go here */
-		};
-	};
-
-How to select correct ECC scheme for your device ?
---------------------------------------------------
-Higher ECC scheme usually means better protection against bit-flips and
-increased system lifetime. However, selection of ECC scheme is dependent
-on various other factors also like;
-
-(1) support of built in hardware engines.
-	Some legacy OMAP SoC do not have ELM harware engine, so those SoC cannot
-	support ecc-schemes with hardware error-correction (BCHx_HW). However
-	such SoC can use ecc-schemes with software library for error-correction
-	(BCHx_HW_DETECTION_SW). The error correction capability with software
-	library remains equivalent to their hardware counter-part, but there is
-	slight CPU penalty when too many bit-flips are detected during reads.
-
-(2) Device parameters like OOBSIZE.
-	Other factor which governs the selection of ecc-scheme is oob-size.
-	Higher ECC schemes require more OOB/Spare area to store ECC syndrome,
-	so the device should have enough free bytes available its OOB/Spare
-	area to accommodate ECC for entire page. In general following expression
-	helps in determining if given device can accommodate ECC syndrome:
-	"2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE"
-	where
-		OOBSIZE		number of bytes in OOB/spare area
-		PAGESIZE	number of bytes in main-area of device page
-		ECC_BYTES	number of ECC bytes generated to protect
-		                512 bytes of data, which is:
-				'3' for HAM1_xx ecc schemes
-				'7' for BCH4_xx ecc schemes
-				'14' for BCH8_xx ecc schemes
-				'26' for BCH16_xx ecc schemes
-
-	Example(a): For a device with PAGESIZE = 2048 and OOBSIZE = 64 and
-		trying to use BCH16 (ECC_BYTES=26) ecc-scheme.
-		Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B
-		which is greater than capacity of NAND device (OOBSIZE=64)
-		Hence, BCH16 cannot be supported on given device. But it can
-		probably use lower ecc-schemes like BCH8.
-
-	Example(b): For a device with PAGESIZE = 2048 and OOBSIZE = 128 and
-		trying to use BCH16 (ECC_BYTES=26) ecc-scheme.
-		Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B
-		which can be accommodated in the OOB/Spare area of this device
-		(OOBSIZE=128). So this device can use BCH16 ecc-scheme.
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
deleted file mode 100644
index c8567b40fe13..000000000000
--- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Device tree bindings for NOR flash connect to TI GPMC
-
-NOR flash connected to the TI GPMC (found on OMAP boards) are represented as
-child nodes of the GPMC controller with a name of "nor".
-
-All timing relevant properties as well as generic GPMC child properties are
-explained in a separate documents. Please refer to
-Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
-
-Required properties:
-- bank-width: 		Width of NOR flash in bytes. GPMC supports 8-bit and
-			16-bit devices and so must be either 1 or 2 bytes.
-- compatible:		Documentation/devicetree/bindings/mtd/mtd-physmap.txt
-- gpmc,cs-on-ns:		Chip-select assertion time
-- gpmc,cs-rd-off-ns:	Chip-select de-assertion time for reads
-- gpmc,cs-wr-off-ns:	Chip-select de-assertion time for writes
-- gpmc,oe-on-ns:	Output-enable assertion time
-- gpmc,oe-off-ns:	Output-enable de-assertion time
-- gpmc,we-on-ns		Write-enable assertion time
-- gpmc,we-off-ns:	Write-enable de-assertion time
-- gpmc,access-ns:	Start cycle to first data capture (read access)
-- gpmc,rd-cycle-ns:	Total read cycle time
-- gpmc,wr-cycle-ns:	Total write cycle time
-- linux,mtd-name:	Documentation/devicetree/bindings/mtd/mtd-physmap.txt
-- reg:			Chip-select, base address (relative to chip-select)
-			and size of NOR flash. Note that base address will be
-			typically 0 as this is the start of the chip-select.
-
-Optional properties:
-- gpmc,XXX		Additional GPMC timings and settings parameters. See
-			Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
-
-Optional properties for partition table parsing:
-- #address-cells: should be set to 1
-- #size-cells: should be set to 1
-
-Example:
-
-gpmc: gpmc@6e000000 {
-	compatible = "ti,omap3430-gpmc", "simple-bus";
-	ti,hwmods = "gpmc";
-	reg = <0x6e000000 0x1000>;
-	interrupts = <20>;
-	gpmc,num-cs = <8>;
-	gpmc,num-waitpins = <4>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-
-	ranges = <0 0 0x10000000 0x08000000>;
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		linux,mtd-name= "intel,pf48f6000m0y1be";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x08000000>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
-		partition@0 {
-			label = "bootloader-nor";
-			reg = <0 0x40000>;
-		};
-		partition@40000 {
-			label = "params-nor";
-			reg = <0x40000 0x40000>;
-		};
-		partition@80000 {
-			label = "kernel-nor";
-			reg = <0x80000 0x200000>;
-		};
-		partition@280000 {
-			label = "filesystem-nor";
-			reg = <0x240000 0x7d80000>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
deleted file mode 100644
index e9f01a963a0a..000000000000
--- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Device tree bindings for GPMC connected OneNANDs
-
-GPMC connected OneNAND (found on OMAP boards) are represented as child nodes of
-the GPMC controller with a name of "onenand".
-
-All timing relevant properties as well as generic gpmc child properties are
-explained in a separate documents - please refer to
-Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
-
-Required properties:
-
- - compatible:		"ti,omap2-onenand"
- - reg:			The CS line the peripheral is connected to
- - gpmc,device-width:	Width of the ONENAND device connected to the GPMC
-			in bytes. Must be 1 or 2.
-
-Optional properties:
-
- - int-gpios:		GPIO specifier for the INT pin.
-
-For inline partition table parsing (optional):
-
- - #address-cells: should be set to 1
- - #size-cells: should be set to 1
-
-Example for an OMAP3430 board:
-
-	gpmc: gpmc@6e000000 {
-		compatible = "ti,omap3430-gpmc";
-		ti,hwmods = "gpmc";
-		reg = <0x6e000000 0x1000000>;
-		interrupts = <20>;
-		gpmc,num-cs = <8>;
-		gpmc,num-waitpins = <4>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-
-		onenand@0 {
-			compatible = "ti,omap2-onenand";
-			reg = <0 0 0>; /* CS0, offset 0 */
-			gpmc,device-width = <2>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/* partitions go here */
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
deleted file mode 100644
index 393588385c6e..000000000000
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-* Freescale General-Purpose Media Interface (GPMI)
-
-The GPMI nand controller provides an interface to control the
-NAND flash chips.
-
-Required properties:
-  - compatible : should be "fsl,<chip>-gpmi-nand", chip can be:
-    * imx23
-    * imx28
-    * imx6q
-    * imx6sx
-    * imx7d
-  - reg : should contain registers location and length for gpmi and bch.
-  - reg-names: Should contain the reg names "gpmi-nand" and "bch"
-  - interrupts : BCH interrupt number.
-  - interrupt-names : Should be "bch".
-  - dmas: DMA specifier, consisting of a phandle to DMA controller node
-    and GPMI DMA channel ID.
-    Refer to dma.txt and fsl-mxs-dma.txt for details.
-  - dma-names: Must be "rx-tx".
-  - clocks : clocks phandle and clock specifier corresponding to each clock
-    specified in clock-names.
-  - clock-names : The "gpmi_io" clock is always required. Which clocks are
-    exactly required depends on chip:
-    * imx23/imx28 : "gpmi_io"
-    * imx6q/sx : "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch"
-    * imx7d : "gpmi_io", "gpmi_bch_apb"
-
-Optional properties:
-  - nand-on-flash-bbt: boolean to enable on flash bbt option if not
-                       present false
-  - fsl,use-minimum-ecc: Protect this NAND flash with the minimum ECC
-                       strength required. The required ECC strength is
-                       automatically discoverable for some flash
-                       (e.g., according to the ONFI standard).
-                       However, note that if this strength is not
-                       discoverable or this property is not enabled,
-                       the software may chooses an implementation-defined
-                       ECC scheme.
-  - fsl,no-blockmark-swap: Don't swap the bad block marker from the OOB
-                       area with the byte in the data area but rely on the
-                       flash based BBT for identifying bad blocks.
-                       NOTE: this is only valid in conjunction with
-                             'nand-on-flash-bbt'.
-                       WARNING: on i.MX28 blockmark swapping cannot be
-                       disabled for the BootROM in the FCB. Thus,
-                       partitions written from Linux with this feature
-                       turned on may not be accessible by the BootROM
-                       code.
-  - nand-ecc-strength: integer representing the number of bits to correct
-                       per ECC step. Needs to be a multiple of 2.
-  - nand-ecc-step-size: integer representing the number of data bytes
-                       that are covered by a single ECC step. The driver
-                       supports 512 and 1024.
-
-The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Examples:
-
-gpmi-nand@8000c000 {
-	compatible = "fsl,imx28-gpmi-nand";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	reg = <0x8000c000 2000>, <0x8000a000 2000>;
-	reg-names = "gpmi-nand", "bch";
-	interrupts = <41>;
-	interrupt-names = "bch";
-	dmas = <&dma_apbh 4>;
-	dma-names = "rx-tx";
-
-	partition@0 {
-	...
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
new file mode 100644
index 000000000000..849aeae319a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale General-Purpose Media Interface (GPMI) binding
+
+maintainers:
+  - Han Xu <han.xu@nxp.com>
+
+description: |
+  The GPMI nand controller provides an interface to control the NAND
+  flash chips. The device tree may optionally contain sub-nodes
+  describing partitions of the address space. See partition.txt for
+  more detail.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx23-gpmi-nand
+          - fsl,imx28-gpmi-nand
+          - fsl,imx6q-gpmi-nand
+          - fsl,imx6sx-gpmi-nand
+          - fsl,imx7d-gpmi-nand
+      - items:
+          - enum:
+              - fsl,imx8mm-gpmi-nand
+              - fsl,imx8mn-gpmi-nand
+          - const: fsl,imx7d-gpmi-nand
+
+  reg:
+    items:
+      - description: Address and length of gpmi block.
+      - description: Address and length of bch block.
+
+  reg-names:
+    items:
+      - const: gpmi-nand
+      - const: bch
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: bch
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  fsl,use-minimum-ecc:
+    type: boolean
+    description: |
+      Protect this NAND flash with the minimum ECC strength required.
+      The required ECC strength is automatically discoverable for some
+      flash (e.g., according to the ONFI standard). However, note that
+      if this strength is not discoverable or this property is not enabled,
+      the software may chooses an implementation-defined ECC scheme.
+
+  fsl,no-blockmark-swap:
+    type: boolean
+    description: |
+      Don't swap the bad block marker from the OOB area with the byte in
+      the data area but rely on the flash based BBT for identifying bad blocks.
+      NOTE: this is only valid in conjunction with 'nand-on-flash-bbt'.
+      WARNING: on i.MX28 blockmark swapping cannot be disabled for the BootROM
+      in the FCB. Thus, partitions written from Linux with this feature turned
+      on may not be accessible by the BootROM code.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: "nand-controller.yaml"
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx23-gpmi-nand
+              - fsl,imx28-gpmi-nand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SoC gpmi io clock
+        clock-names:
+          items:
+            - const: gpmi_io
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-gpmi-nand
+              - fsl,imx6sx-gpmi-nand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SoC gpmi io clock
+            - description: SoC gpmi apb clock
+            - description: SoC gpmi bch clock
+            - description: SoC gpmi bch apb clock
+            - description: SoC per1 bch clock
+        clock-names:
+          items:
+            - const: gpmi_io
+            - const: gpmi_apb
+            - const: gpmi_bch
+            - const: gpmi_bch_apb
+            - const: per1_bch
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx7d-gpmi-nand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SoC gpmi io clock
+            - description: SoC gpmi bch apb clock
+        clock-names:
+          items:
+            - const: gpmi_io
+            - const: gpmi_bch_apb
+
+examples:
+  - |
+    nand-controller@8000c000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx28-gpmi-nand";
+        reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+        reg-names = "gpmi-nand", "bch";
+        interrupts = <41>;
+        interrupt-names = "bch";
+        clocks = <&clks 50>;
+        clock-names = "gpmi_io";
+        dmas = <&dma_apbh 4>;
+        dma-names = "rx-tx";
+    };
diff --git a/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
index 74981520d6dd..a99de13c7ccd 100644
--- a/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
@@ -17,7 +17,7 @@ spi-nor-controller@10000000 {
 	reg = <0x10000000 0x1000>, <0x14000000 0x1000000>;
 	reg-names = "control", "memory";
 	clocks = <&clock HI3519_FMC_CLK>;
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 	};
diff --git a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
deleted file mode 100644
index c02259353327..000000000000
--- a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-* Ingenic JZ4780 NAND/ECC
-
-This file documents the device tree bindings for NAND flash devices on the
-JZ4780. NAND devices are connected to the NEMC controller (described in
-memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must
-be children of the NEMC node.
-
-Required NAND controller device properties:
-- compatible: Should be one of:
-  * ingenic,jz4740-nand
-  * ingenic,jz4725b-nand
-  * ingenic,jz4780-nand
-- reg: For each bank with a NAND chip attached, should specify a bank number,
-  an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank).
-
-Optional NAND controller device properties:
-- ecc-engine: To make use of the hardware ECC controller, this
-  property must contain a phandle for the ECC controller node. The required
-  properties for this node are described below. If this is not specified,
-  software ECC will be used instead.
-
-Optional children nodes:
-- Individual NAND chips are children of the NAND controller node.
-
-Required children node properties:
-- reg: An integer ranging from 1 to 6 representing the CS line to use.
-
-Optional children node properties:
-- nand-ecc-step-size: ECC block size in bytes.
-- nand-ecc-strength: ECC strength (max number of correctable bits).
-- nand-ecc-mode: String, operation mode of the NAND ecc mode. "hw" by default
-- nand-on-flash-bbt: boolean to enable on flash bbt option, if not present false
-- rb-gpios: GPIO specifier for the busy pin.
-- wp-gpios: GPIO specifier for the write protect pin.
-
-Optional child node of NAND chip nodes:
-- partitions: see Documentation/devicetree/bindings/mtd/partition.txt
-
-Example:
-
-nemc: nemc@13410000 {
-	...
-
-	nandc: nand-controller@1 {
-		compatible = "ingenic,jz4780-nand";
-		reg = <1 0 0x1000000>;	/* Bank 1 */
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ecc-engine = <&bch>;
-
-		nand@1 {
-			reg = <1>;
-
-			nand-ecc-step-size = <1024>;
-			nand-ecc-strength = <24>;
-			nand-ecc-mode = "hw";
-			nand-on-flash-bbt;
-
-			rb-gpios = <&gpa 20 GPIO_ACTIVE_LOW>;
-			wp-gpios = <&gpf 22 GPIO_ACTIVE_LOW>;
-
-			partitions {
-				#address-cells = <2>;
-				#size-cells = <2>;
-				...
-			}
-		};
-	};
-};
-
-The ECC controller is a separate SoC component used for error correction on
-NAND devices. The following is a description of the device properties for a
-ECC controller.
-
-Required ECC properties:
-- compatible: Should be one of:
-  * ingenic,jz4740-ecc
-  * ingenic,jz4725b-bch
-  * ingenic,jz4780-bch
-- reg: Should specify the ECC controller registers location and length.
-- clocks: Clock for the ECC controller.
-
-Example:
-
-bch: bch@134d0000 {
-	compatible = "ingenic,jz4780-bch";
-	reg = <0x134d0000 0x10000>;
-
-	clocks = <&cgu JZ4780_CLK_BCH>;
-};
diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
new file mode 100644
index 000000000000..8c272c842bfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ingenic,nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs NAND controller devicetree bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: nand-controller.yaml#
+  - $ref: /schemas/memory-controllers/ingenic,nemc-peripherals.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4740-nand
+      - ingenic,jz4725b-nand
+      - ingenic,jz4780-nand
+
+  reg:
+    items:
+      - description: Bank number, offset and size of first attached NAND chip
+      - description: Bank number, offset and size of second attached NAND chip
+      - description: Bank number, offset and size of third attached NAND chip
+      - description: Bank number, offset and size of fourth attached NAND chip
+    minItems: 1
+
+  ecc-engine: true
+
+  partitions:
+    type: object
+    description:
+      Node containing description of fixed partitions.
+      See Documentation/devicetree/bindings/mtd/partition.txt
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    properties:
+      rb-gpios:
+        description: GPIO specifier for the busy pin.
+        maxItems: 1
+
+      wp-gpios:
+        description: GPIO specifier for the write-protect pin.
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    memory-controller@13410000 {
+      compatible = "ingenic,jz4780-nemc";
+      reg = <0x13410000 0x10000>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      ranges = <1 0 0x1b000000 0x1000000>,
+         <2 0 0x1a000000 0x1000000>,
+         <3 0 0x19000000 0x1000000>,
+         <4 0 0x18000000 0x1000000>,
+         <5 0 0x17000000 0x1000000>,
+         <6 0 0x16000000 0x1000000>;
+
+      clocks = <&cgu JZ4780_CLK_NEMC>;
+
+      nand-controller@1 {
+        compatible = "ingenic,jz4780-nand";
+        reg = <1 0 0x1000000>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ecc-engine = <&bch>;
+
+        ingenic,nemc-tAS = <10>;
+        ingenic,nemc-tAH = <5>;
+        ingenic,nemc-tBP = <10>;
+        ingenic,nemc-tAW = <15>;
+        ingenic,nemc-tSTRV = <100>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&pins_nemc>;
+
+        nand@1 {
+          reg = <1>;
+
+          nand-ecc-step-size = <1024>;
+          nand-ecc-strength = <24>;
+          nand-ecc-mode = "hw";
+          nand-on-flash-bbt;
+
+          pinctrl-names = "default";
+          pinctrl-0 = <&pins_nemc_cs1>;
+
+          partitions {
+            compatible = "fixed-partitions";
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            partition@0 {
+              label = "u-boot-spl";
+              reg = <0x0 0x0 0x0 0x800000>;
+            };
+
+            partition@800000 {
+              label = "u-boot";
+              reg = <0x0 0x800000 0x0 0x200000>;
+            };
+
+            partition@a00000 {
+              label = "u-boot-env";
+              reg = <0x0 0xa00000 0x0 0x200000>;
+            };
+
+            partition@c00000 {
+              label = "boot";
+              reg = <0x0 0xc00000 0x0 0x4000000>;
+            };
+
+            partition@4c00000 {
+              label = "system";
+              reg = <0x0 0x4c00000 0x1 0xfb400000>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/intel,ixp4xx-flash.txt b/Documentation/devicetree/bindings/mtd/intel,ixp4xx-flash.txt
deleted file mode 100644
index 4bdcb92ae381..000000000000
--- a/Documentation/devicetree/bindings/mtd/intel,ixp4xx-flash.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Flash device on Intel IXP4xx SoC
-
-This flash is regular CFI compatible (Intel or AMD extended) flash chips with
-specific big-endian or mixed-endian memory access pattern.
-
-Required properties:
-- compatible : must be "intel,ixp4xx-flash", "cfi-flash";
-- reg : memory address for the flash chip
-- bank-width : width in bytes of flash interface, should be <2>
-
-For the rest of the properties, see mtd-physmap.txt.
-
-The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Example:
-
-flash@50000000 {
-	compatible = "intel,ixp4xx-flash", "cfi-flash";
-	reg = <0x50000000 0x01000000>;
-	bank-width = <2>;
-};
diff --git a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
new file mode 100644
index 000000000000..741c66ee06c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/intel,lgm-ebunand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel LGM SoC NAND Controller
+
+allOf:
+  - $ref: "nand-controller.yaml"
+
+maintainers:
+  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+properties:
+  compatible:
+    const: intel,lgm-ebunand
+
+  reg:
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: ebunand
+      - const: hsnand
+      - const: nand_cs0
+      - const: nand_cs1
+      - const: addr_sel0
+      - const: addr_sel1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^nand@[a-f0-9]+$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      nand-ecc-mode: true
+
+      nand-ecc-algo:
+        const: hw
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - dmas
+  - dma-names
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    nand-controller@e0f00000 {
+      compatible = "intel,lgm-ebunand";
+      reg = <0xe0f00000 0x100>,
+            <0xe1000000 0x300>,
+            <0xe1400000 0x8000>,
+            <0xe1c00000 0x1000>,
+            <0x17400000 0x4>,
+            <0x17c00000 0x4>;
+      reg-names = "ebunand", "hsnand", "nand_cs0", "nand_cs1",
+        "addr_sel0", "addr_sel1";
+      clocks = <&cgu0 125>;
+      dmas = <&dma0 8>, <&dma0 9>;
+      dma-names = "tx", "rx";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+        nand-ecc-mode = "hw";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
deleted file mode 100644
index f03be904d3c2..000000000000
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-* SPI NOR flash: ST M25Pxx (and similar) serial flash chips
-
-Required properties:
-- #address-cells, #size-cells : Must be present if the device has sub-nodes
-  representing partitions.
-- compatible : May include a device-specific string consisting of the
-               manufacturer and name of the chip. A list of supported chip
-               names follows.
-               Must also include "jedec,spi-nor" for any SPI NOR flash that can
-               be identified by the JEDEC READ ID opcode (0x9F).
-
-               Supported chip names:
-                 at25df321a
-                 at25df641
-                 at26df081a
-                 mr25h128
-                 mr25h256
-                 mr25h10
-                 mr25h40
-                 mx25l4005a
-                 mx25l1606e
-                 mx25l6405d
-                 mx25l12805d
-                 mx25l25635e
-                 n25q064
-                 n25q128a11
-                 n25q128a13
-                 n25q512a
-                 s25fl256s1
-                 s25fl512s
-                 s25sl12801
-                 s25fl008k
-                 s25fl064k
-                 sst25vf040b
-                 m25p40
-                 m25p80
-                 m25p16
-                 m25p32
-                 m25p64
-                 m25p128
-                 w25x80
-                 w25x32
-                 w25q32
-                 w25q64
-                 w25q32dw
-                 w25q80bl
-                 w25q128
-                 w25q256
-
-               The following chip names have been used historically to
-               designate quirky versions of flash chips that do not support the
-               JEDEC READ ID opcode (0x9F):
-                 m25p05-nonjedec
-                 m25p10-nonjedec
-                 m25p20-nonjedec
-                 m25p40-nonjedec
-                 m25p80-nonjedec
-                 m25p16-nonjedec
-                 m25p32-nonjedec
-                 m25p64-nonjedec
-                 m25p128-nonjedec
-
-- reg : Chip-Select number
-- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
-
-Optional properties:
-- m25p,fast-read : Use the "fast read" opcode to read data from the chip instead
-                   of the usual "read" opcode. This opcode is not supported by
-                   all chips and support for it can not be detected at runtime.
-                   Refer to your chips' datasheet to check if this is supported
-                   by your chip.
-- broken-flash-reset : Some flash devices utilize stateful addressing modes
-		   (e.g., for 32-bit addressing) which need to be managed
-		   carefully by a system. Because these sorts of flash don't
-		   have a standardized software reset command, and because some
-		   systems don't toggle the flash RESET# pin upon system reset
-		   (if the pin even exists at all), there are systems which
-		   cannot reboot properly if the flash is left in the "wrong"
-		   state. This boolean flag can be used on such systems, to
-		   denote the absence of a reliable reset mechanism.
-
-Example:
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,m25p80", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-		m25p,fast-read;
-	};
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
new file mode 100644
index 000000000000..7149784a36ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/jedec,spi-nor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI NOR flash ST M25Pxx (and similar) serial flash chips
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+allOf:
+  - $ref: "mtd.yaml#"
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: "^((((micron|spansion|st),)?\
+              (m25p(40|80|16|32|64|128)|\
+              n25q(32b|064|128a11|128a13|256a|512a|164k)))|\
+              atmel,at25df(321a|641|081a)|\
+              everspin,mr25h(10|40|128|256)|\
+              (mxicy|macronix),mx25l(4005a|1606e|6405d|8005|12805d|25635e)|\
+              (mxicy|macronix),mx25u(4033|4035)|\
+              (spansion,)?s25fl(128s|256s1|512s|008k|064k|164k)|\
+              (sst|microchip),sst25vf(016b|032b|040b)|\
+              (sst,)?sst26wf016b|\
+              (sst,)?sst25wf(040b|080)|\
+              winbond,w25x(80|32)|\
+              (winbond,)?w25q(16|32(w|dw)?|64(dw)?|80bl|128(fw)?|256))$"
+          - const: jedec,spi-nor
+      - items:
+          - enum:
+              - issi,is25lp016d
+              - micron,mt25qu02g
+              - mxicy,mx25r1635f
+              - mxicy,mx25u6435f
+              - mxicy,mx25v8035f
+              - spansion,s25sl12801
+              - spansion,s25fs512s
+          - const: jedec,spi-nor
+      - const: jedec,spi-nor
+    description:
+      Must also include "jedec,spi-nor" for any SPI NOR flash that can be
+      identified by the JEDEC READ ID opcode (0x9F).
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  m25p,fast-read:
+    type: boolean
+    description:
+      Use the "fast read" opcode to read data from the chip instead of the usual
+      "read" opcode. This opcode is not supported by all chips and support for
+      it can not be detected at runtime. Refer to your chips' datasheet to check
+      if this is supported by your chip.
+
+  broken-flash-reset:
+    type: boolean
+    description:
+      Some flash devices utilize stateful addressing modes (e.g., for 32-bit
+      addressing) which need to be managed carefully by a system. Because these
+      sorts of flash don't have a standardized software reset command, and
+      because some systems don't toggle the flash RESET# pin upon system reset
+      (if the pin even exists at all), there are systems which cannot reboot
+      properly if the flash is left in the "wrong" state. This boolean flag can
+      be used on such systems, to denote the absence of a reliable reset
+      mechanism.
+
+  partitions:
+    type: object
+
+  '#address-cells': true
+  '#size-cells': true
+
+patternProperties:
+  # Note: use 'partitions' node for new users
+  '^partition@':
+    type: object
+
+  "^otp(-[0-9]+)?$":
+    type: object
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "spansion,m25p80", "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+            m25p,fast-read;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml
new file mode 100644
index 000000000000..8cc2a7ceb5fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mtd/microchip,mchp48l640.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Microchip 48l640 (and similar) serial EERAM bindings
+
+maintainers:
+  - Heiko Schocher <hs@denx.de>
+
+description: |
+  The Microchip 48l640 is a 8KByte EERAM connected via SPI.
+
+  datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/20006055B.pdf
+
+properties:
+  compatible:
+    items:
+      - const: microchip,48l640
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      eeram@0 {
+        compatible = "microchip,48l640";
+        reg = <0>;
+        spi-max-frequency = <20000000>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
deleted file mode 100644
index c69f4f065d23..000000000000
--- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...)
-
-Flash chips (Memory Technology Devices) are often used for solid state
-file systems on embedded devices.
-
- - compatible : should contain the specific model of mtd chip(s)
-   used, if known, followed by either "cfi-flash", "jedec-flash",
-   "mtd-ram" or "mtd-rom".
- - reg : Address range(s) of the mtd chip(s)
-   It's possible to (optionally) define multiple "reg" tuples so that
-   non-identical chips can be described in one node.
- - bank-width : Width (in bytes) of the bank.  Equal to the
-   device width times the number of interleaved chips.
- - device-width : (optional) Width of a single mtd chip.  If
-   omitted, assumed to be equal to 'bank-width'.
- - #address-cells, #size-cells : Must be present if the device has
-   sub-nodes representing partitions (see below).  In this case
-   both #address-cells and #size-cells must be equal to 1.
- - no-unaligned-direct-access: boolean to disable the default direct
-   mapping of the flash.
-   On some platforms (e.g. MPC5200) a direct 1:1 mapping may cause
-   problems with JFFS2 usage, as the local bus (LPB) doesn't support
-   unaligned accesses as implemented in the JFFS2 code via memcpy().
-   By defining "no-unaligned-direct-access", the flash will not be
-   exposed directly to the MTD users (e.g. JFFS2) any more.
- - linux,mtd-name: allow to specify the mtd name for retro capability with
-   physmap-flash drivers as boot loader pass the mtd partition via the old
-   device name physmap-flash.
- - use-advanced-sector-protection: boolean to enable support for the
-   advanced sector protection (Spansion: PPB - Persistent Protection
-   Bits) locking.
- - addr-gpios : (optional) List of GPIO descriptors that will be used to
-   address the MSBs address lines. The order goes from LSB to MSB.
-
-For JEDEC compatible devices, the following additional properties
-are defined:
-
- - vendor-id : Contains the flash chip's vendor id (1 byte).
- - device-id : Contains the flash chip's device id (1 byte).
-
-For ROM compatible devices (and ROM fallback from cfi-flash), the following
-additional (optional) property is defined:
-
- - erase-size : The chip's physical erase block size in bytes.
-
- The device tree may optionally contain endianness property.
- little-endian or big-endian : It Represents the endianness that should be used
-                               by the controller to  properly read/write data
-			       from/to the flash. If this property is missing,
-			       the endianness is chosen by the system
-			       (potentially based on extra configuration options).
-
-The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Example:
-
-	flash@ff000000 {
-		compatible = "amd,am29lv128ml", "cfi-flash";
-		reg = <ff000000 01000000>;
-		bank-width = <4>;
-		device-width = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		fs@0 {
-			label = "fs";
-			reg = <0 f80000>;
-		};
-		firmware@f80000 {
-			label ="firmware";
-			reg = <f80000 80000>;
-			read-only;
-		};
-	};
-
-Here an example with multiple "reg" tuples:
-
-	flash@f0000000,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "intel,PC48F4400P0VB", "cfi-flash";
-		reg = <0 0x00000000 0x02000000
-		       0 0x02000000 0x02000000>;
-		bank-width = <2>;
-		partition@0 {
-			label = "test-part1";
-			reg = <0 0x04000000>;
-		};
-	};
-
-An example using SRAM:
-
-	sram@2,0 {
-		compatible = "samsung,k6f1616u6a", "mtd-ram";
-		reg = <2 0 0x00200000>;
-		bank-width = <2>;
-	};
-
-An example using gpio-addrs
-
-	flash@20000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash", "jedec-flash";
-		reg = <0x20000000 0x02000000>;
-		ranges = <0 0x00000000 0x02000000
-		          1 0x02000000 0x02000000>;
-		bank-width = <2>;
-		addr-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		partition@0 {
-			label = "test-part1";
-			reg = <0 0x04000000>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
new file mode 100644
index 000000000000..82eb4e0f453b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
@@ -0,0 +1,225 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...)
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |
+  Flash chips (Memory Technology Devices) are often used for solid state
+  file systems on embedded devices.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amd,s29gl01gp
+              - amd,s29gl032a
+              - amd,s29gl256n
+              - amd,s29gl512n
+              - arm,versatile-flash
+              - arm,vexpress-flash
+              - cortina,gemini-flash
+              - cypress,hyperflash
+              - ge,imp3a-firmware-mirror
+              - ge,imp3a-paged-flash
+              - gef,ppc9a-firmware-mirror
+              - gef,ppc9a-paged-flash
+              - gef,sbc310-firmware-mirror
+              - gef,sbc310-paged-flash
+              - gef,sbc610-firmware-mirror
+              - gef,sbc610-paged-flash
+              - intel,28f128j3
+              - intel,dt28f160
+              - intel,ixp4xx-flash
+              - intel,JS28F128
+              - intel,JS28F640
+              - intel,PC28F640P30T85
+              - numonyx,js28f00a
+              - numonyx,js28f128
+              - sst,sst39vf320
+              - xlnx,xps-mch-emc-2.00.a
+          - enum:
+              - cfi-flash
+              - jedec-flash
+      - items:
+          - enum:
+              - cypress,cy7c1019dv33-10zsxi
+              - arm,vexpress-psram
+          - const: mtd-ram
+      - enum:
+          - cfi-flash
+          - jedec-flash
+          - mtd-ram
+          - mtd-rom
+
+  reg:
+    description: |
+      It's possible to (optionally) define multiple "reg" tuples so that
+      non-identical chips can be described in one node.
+    minItems: 1
+    maxItems: 8
+
+  bank-width:
+    description: Width (in bytes) of the bank.  Equal to the device width times
+      the number of interleaved chips.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 4 ]
+
+  device-width:
+    description:
+      Width of a single mtd chip. If omitted, assumed to be equal to 'bank-width'.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2 ]
+
+  no-unaligned-direct-access:
+    type: boolean
+    description: |
+      Disables the default direct mapping of the flash.
+
+      On some platforms (e.g. MPC5200) a direct 1:1 mapping may cause problems
+      with JFFS2 usage, as the local bus (LPB) doesn't support unaligned
+      accesses as implemented in the JFFS2 code via memcpy(). By defining
+      "no-unaligned-direct-access", the flash will not be exposed directly to
+      the MTD users (e.g. JFFS2) any more.
+
+  linux,mtd-name:
+    description:
+      Allows specifying the mtd name for retro capability with physmap-flash
+      drivers as boot loader pass the mtd partition via the old device name
+      physmap-flash.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  use-advanced-sector-protection:
+    type: boolean
+    description: |
+      Enables support for the advanced sector protection (Spansion: PPB -
+      Persistent Protection Bits) locking.
+
+  erase-size:
+    description: The chip's physical erase block size in bytes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  addr-gpios:
+    description:
+      List of GPIO descriptors that will be used to address the MSBs address
+      lines. The order goes from LSB to MSB.
+    minItems: 1
+    maxItems: 8
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  big-endian: true
+  little-endian: true
+
+patternProperties:
+  '@[0-9a-f]+$':
+    $ref: partitions/partition.yaml
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: cortina,gemini-flash
+then:
+  properties:
+    syscon:
+      $ref: /schemas/types.yaml#/definitions/phandle
+      description:
+        Phandle to the syscon controller
+  required:
+    - syscon
+
+# FIXME: A parent bus may define timing properties
+additionalProperties: true
+
+examples:
+  - |
+
+    flash@ff000000 {
+        compatible = "cfi-flash";
+        reg = <0xff000000 0x01000000>;
+        bank-width = <4>;
+        device-width = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0xff000000 0x01000000>;
+
+        fs@0 {
+            label = "fs";
+            reg = <0 0xf80000>;
+        };
+        firmware@f80000 {
+            label ="firmware";
+            reg = <0xf80000 0x80000>;
+            read-only;
+        };
+    };
+
+  - |
+    /* An example with multiple "reg" tuples */
+
+    flash@0 {
+        compatible = "intel,PC28F640P30T85", "cfi-flash";
+        reg = <0x00000000 0x02000000>,
+              <0x02000000 0x02000000>;
+        bank-width = <2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0 0x04000000>;
+
+        partition@0 {
+            label = "test-part1";
+            reg = <0 0x04000000>;
+        };
+    };
+
+  - |
+    /* An example using SRAM */
+    bus {
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        sram@2,0 {
+            compatible = "mtd-ram";
+            reg = <2 0 0x00200000>;
+            bank-width = <2>;
+        };
+    };
+
+  - |
+    /* An example using addr-gpios */
+    #include <dt-bindings/gpio/gpio.h>
+
+    flash@20000000 {
+        compatible = "cfi-flash";
+        reg = <0x20000000 0x02000000>;
+        bank-width = <2>;
+        addr-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x00000000 0x02000000>,
+                 <1 0x02000000 0x02000000>;
+
+        partition@0 {
+            label = "test-part1";
+            reg = <0 0x04000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml
new file mode 100644
index 000000000000..3498e485679b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mtd.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mtd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTD (Memory Technology Device)
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Richard Weinberger <richard@nod.at>
+
+properties:
+  $nodename:
+    pattern: "^flash(@.*)?$"
+
+  label:
+    description:
+      User-defined MTD device name. Can be used to assign user friendly
+      names to MTD devices (instead of the flash model or flash controller
+      based name) in order to ease flash device identification and/or
+      describe what they are used for.
+
+patternProperties:
+  "^otp(-[0-9]+)?$":
+    type: object
+    $ref: ../nvmem/nvmem.yaml#
+
+    description: |
+      An OTP memory region. Some flashes provide a one-time-programmable
+      memory whose content can either be programmed by a user or is already
+      pre-programmed by the factory. Some flashes might provide both.
+
+    properties:
+      compatible:
+        enum:
+          - user-otp
+          - factory-otp
+
+    required:
+      - compatible
+
+additionalProperties: true
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            reg = <0>;
+            compatible = "jedec,spi-nor";
+            label = "System-firmware";
+        };
+    };
+
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            reg = <0>;
+            compatible = "jedec,spi-nor";
+
+            otp-1 {
+                compatible = "factory-otp";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                electronic-serial-number@0 {
+                    reg = <0 8>;
+                };
+            };
+
+            otp-2 {
+                compatible = "user-otp";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                mac-address@0 {
+                    reg = <0 6>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
deleted file mode 100644
index a12e3b5c495d..000000000000
--- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Serial NOR flash controller for MediaTek SoCs
-
-Required properties:
-- compatible: 	  For mt8173, compatible should be "mediatek,mt8173-nor",
-		  and it's the fallback compatible for other Soc.
-		  For every other SoC, should contain both the SoC-specific compatible
-		  string and "mediatek,mt8173-nor".
-		  The possible values are:
-		  "mediatek,mt2701-nor", "mediatek,mt8173-nor"
-		  "mediatek,mt2712-nor", "mediatek,mt8173-nor"
-		  "mediatek,mt7622-nor", "mediatek,mt8173-nor"
-		  "mediatek,mt7623-nor", "mediatek,mt8173-nor"
-		  "mediatek,mt7629-nor", "mediatek,mt8173-nor"
-		  "mediatek,mt8173-nor"
-- reg: 		  physical base address and length of the controller's register
-- clocks: 	  the phandle of the clocks needed by the nor controller
-- clock-names: 	  the names of the clocks
-		  the clocks should be named "spi" and "sf". "spi" is used for spi bus,
-		  and "sf" is used for controller, these are the clocks witch
-		  hardware needs to enabling nor flash and nor flash controller.
-		  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- #address-cells: should be <1>
-- #size-cells:	  should be <0>
-
-The SPI flash must be a child of the nor_flash node and must have a
-compatible property. Also see jedec,spi-nor.txt.
-
-Required properties:
-- compatible:	  May include a device-specific string consisting of the manufacturer
-		  and name of the chip. Must also include "jedec,spi-nor" for any
-		  SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F).
-- reg :		  Chip-Select number
-
-Example:
-
-nor_flash: spi@1100d000 {
-	compatible = "mediatek,mt8173-nor";
-	reg = <0 0x1100d000 0 0xe0>;
-	clocks = <&pericfg CLK_PERI_SPI>,
-		 <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
-	clock-names = "spi", "sf";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.txt b/Documentation/devicetree/bindings/mtd/mxc-nand.txt
deleted file mode 100644
index 2857c628fba4..000000000000
--- a/Documentation/devicetree/bindings/mtd/mxc-nand.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Freescale's mxc_nand
-
-Required properties:
-- compatible: "fsl,imxXX-nand"
-- reg: address range of the nfc block
-- interrupts: irq to be used
-- nand-bus-width: see nand-controller.yaml
-- nand-ecc-mode: see nand-controller.yaml
-- nand-on-flash-bbt: see nand-controller.yaml
-
-Example:
-
-	nand@d8000000 {
-		compatible = "fsl,imx27-nand";
-		reg = <0xd8000000 0x1000>;
-		interrupts = <29>;
-		nand-bus-width = <8>;
-		nand-ecc-mode = "hw";
-	};
diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
new file mode 100644
index 000000000000..66da1b476ab7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mxc-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale's mxc_nand binding
+
+maintainers:
+  - Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+
+allOf:
+  - $ref: "nand-controller.yaml"
+
+properties:
+  compatible:
+    const: fsl,imx27-nand
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nand-controller@d8000000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx27-nand";
+        reg = <0xd8000000 0x1000>;
+        interrupts = <29>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/mxicy,nand-ecc-engine.yaml b/Documentation/devicetree/bindings/mtd/mxicy,nand-ecc-engine.yaml
new file mode 100644
index 000000000000..f92e7234deab
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mxicy,nand-ecc-engine.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mxicy,nand-ecc-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Macronix NAND ECC engine
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    const: mxicy,nand-ecc-engine-rev3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    /* External configuration */
+    spi_controller0: spi@43c30000 {
+        compatible = "mxicy,mx25f0a-spi";
+        reg = <0x43c30000 0x10000>, <0xa0000000 0x4000000>;
+        reg-names = "regs", "dirmap";
+        clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
+        clock-names = "send_clk", "send_dly_clk", "ps_clk";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "spi-nand";
+            reg = <0>;
+            nand-ecc-engine = <&ecc_engine0>;
+        };
+    };
+
+    ecc_engine0: ecc@43c40000 {
+        compatible = "mxicy,nand-ecc-engine-rev3";
+        reg = <0x43c40000 0x10000>;
+    };
+
+  - |
+    /* Pipelined configuration */
+    spi_controller1: spi@43c30000 {
+        compatible = "mxicy,mx25f0a-spi";
+        reg = <0x43c30000 0x10000>, <0xa0000000 0x4000000>;
+        reg-names = "regs", "dirmap";
+        clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
+        clock-names = "send_clk", "send_dly_clk", "ps_clk";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        nand-ecc-engine = <&ecc_engine1>;
+
+        flash@0 {
+            compatible = "spi-nand";
+            reg = <0>;
+            nand-ecc-engine = <&spi_controller1>;
+        };
+    };
+
+    ecc_engine1: ecc@43c40000 {
+        compatible = "mxicy,nand-ecc-engine-rev3";
+        reg = <0x43c40000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/nand-chip.yaml b/Documentation/devicetree/bindings/mtd/nand-chip.yaml
new file mode 100644
index 000000000000..97ac3a3fbb52
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nand-chip.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nand-chip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAND Chip and NAND Controller Generic Binding
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: |
+  This file covers the generic description of a NAND chip. It implies that the
+  bus interface should not be taken into account: both raw NAND devices and
+  SPI-NAND devices are concerned by this description.
+
+properties:
+  reg:
+    description:
+      Contains the chip-select IDs.
+
+  nand-ecc-engine:
+    description: |
+      A phandle on the hardware ECC engine if any. There are
+      basically three possibilities:
+      1/ The ECC engine is part of the NAND controller, in this
+      case the phandle should reference the parent node.
+      2/ The ECC engine is part of the NAND part (on-die), in this
+      case the phandle should reference the node itself.
+      3/ The ECC engine is external, in this case the phandle should
+      reference the specific ECC engine node.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nand-use-soft-ecc-engine:
+    description: Use a software ECC engine.
+    type: boolean
+
+  nand-no-ecc-engine:
+    description: Do not use any ECC correction.
+    type: boolean
+
+  nand-ecc-algo:
+    description:
+      Desired ECC algorithm.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [hamming, bch, rs]
+
+  nand-ecc-strength:
+    description:
+      Maximum number of bits that can be corrected per ECC step.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+
+  nand-ecc-step-size:
+    description:
+      Number of data bytes covered by a single ECC step.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+
+  secure-regions:
+    description:
+      Regions in the NAND chip which are protected using a secure element
+      like Trustzone. This property contains the start address and size of
+      the secure regions present.
+    $ref: /schemas/types.yaml#/definitions/uint64-matrix
+
+required:
+  - reg
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index d261b7096c69..359a015d4e5a 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -38,41 +38,44 @@ properties:
 
   ranges: true
 
+  cs-gpios:
+    description:
+      Array of chip-select available to the controller. The first
+      entries are a 1:1 mapping of the available chip-select on the
+      NAND controller (even if they are not used). As many additional
+      chip-select as needed may follow and should be phandles of GPIO
+      lines. 'reg' entries of the NAND chip subnodes become indexes of
+      this array when this property is present.
+    minItems: 1
+    maxItems: 8
+
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
+    $ref: "nand-chip.yaml#"
+
     properties:
       reg:
         description:
-          Contains the native Ready/Busy IDs.
+          Contains the chip-select IDs.
 
-      nand-ecc-mode:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string
-          - enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ]
+      nand-ecc-placement:
         description:
-          Desired ECC engine, either hardware (most of the time
-          embedded in the NAND controller) or software correction
-          (Linux will handle the calculations). soft_bch is deprecated
-          and should be replaced by soft and nand-ecc-algo.
-
-      nand-ecc-algo:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string
-          - enum: [ hamming, bch, rs ]
-        description:
-          Desired ECC algorithm.
+          Location of the ECC bytes. This location is unknown by default
+          but can be explicitly set to "oob", if all ECC bytes are
+          known to be stored in the OOB area, or "interleaved" if ECC
+          bytes will be interleaved with regular data in the main area.
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [ oob, interleaved ]
 
       nand-bus-width:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 8, 16 ]
-          - default: 8
         description:
           Bus width to the NAND chip
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [8, 16]
+        default: 8
 
       nand-on-flash-bbt:
-        $ref: /schemas/types.yaml#/definitions/flag
         description:
           With this property, the OS will search the device for a Bad
           Block Table (BBT). If not found, it will create one, reserve
@@ -81,23 +84,9 @@ patternProperties:
           few pages of all the blocks will be scanned at boot time to
           find Bad Block Markers (BBM). These markers will help to
           build a volatile BBT in RAM.
-
-      nand-ecc-strength:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 1
-        description:
-          Maximum number of bits that can be corrected per ECC step.
-
-      nand-ecc-step-size:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 1
-        description:
-          Number of data bytes covered by a single ECC step.
+        $ref: /schemas/types.yaml#/definitions/flag
 
       nand-ecc-maximize:
-        $ref: /schemas/types.yaml#/definitions/flag
         description:
           Whether or not the ECC strength should be maximized. The
           maximum ECC strength is both controller and chip
@@ -106,18 +95,33 @@ patternProperties:
           constraint into account. This is particularly useful when
           only the in-band area is used by the upper layers, and you
           want to make your NAND as reliable as possible.
+        $ref: /schemas/types.yaml#/definitions/flag
 
       nand-is-boot-medium:
-        $ref: /schemas/types.yaml#/definitions/flag
         description:
           Whether or not the NAND chip is a boot medium. Drivers might
           use this information to select ECC algorithms supported by
           the boot ROM or similar restrictions.
+        $ref: /schemas/types.yaml#/definitions/flag
 
       nand-rb:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
         description:
           Contains the native Ready/Busy IDs.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      rb-gpios:
+        description:
+          Contains one or more GPIO descriptor (the numper of descriptor
+          depends on the number of R/B pins exposed by the flash) for the
+          Ready/Busy pins. Active state refers to the NAND ready state and
+          should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
+
+      wp-gpios:
+        description:
+          Contains one GPIO descriptor for the Write Protect pin.
+          Active state refers to the NAND Write Protect state and should be
+          set to GPIOD_ACTIVE_LOW unless the signal is inverted.
+        maxItems: 1
 
     required:
       - reg
@@ -126,19 +130,23 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: true
+
 examples:
   - |
     nand-controller {
       #address-cells = <1>;
       #size-cells = <0>;
+      cs-gpios = <0>, <&gpioA 1>; /* A single native CS is available */
 
       /* controller specific properties */
 
       nand@0 {
-        reg = <0>;
-        nand-ecc-mode = "soft";
-        nand-ecc-algo = "bch";
+        reg = <0>; /* Native CS */
+        /* NAND chip specific properties */
+      };
 
-        /* controller specific properties */
+      nand@1 {
+        reg = <1>; /* GPIO CS */
       };
     };
diff --git a/Documentation/devicetree/bindings/mtd/nand-macronix.txt b/Documentation/devicetree/bindings/mtd/nand-macronix.txt
new file mode 100644
index 000000000000..ffab28a2c4d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nand-macronix.txt
@@ -0,0 +1,27 @@
+Macronix NANDs Device Tree Bindings
+-----------------------------------
+
+Macronix NANDs support randomizer operation for scrambling user data,
+which can be enabled with a SET_FEATURE. The penalty when using the
+randomizer are subpage accesses prohibited and more time period needed
+for program operation, i.e., tPROG 300us to 340us (randomizer enabled).
+Enabling the randomizer is a one time persistent and non reversible
+operation.
+
+For more high-reliability concern, if subpage write is not available
+with hardware ECC and not enabled at UBI level, then enabling the
+randomizer is recommended by default by adding a new specific property
+in children nodes.
+
+Required NAND chip properties in children mode:
+- randomizer enable: should be "mxic,enable-randomizer-otp"
+
+Example:
+
+	nand: nand-controller@unit-address {
+
+		nand@0 {
+			reg = <0>;
+			mxic,enable-randomizer-otp;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt
index afbbd870496d..ead90e8274d6 100644
--- a/Documentation/devicetree/bindings/mtd/partition.txt
+++ b/Documentation/devicetree/bindings/mtd/partition.txt
@@ -24,134 +24,10 @@ another partitioning method.
 Available bindings are listed in the "partitions" subdirectory.
 
 
-Fixed Partitions
-================
-
-Partitions can be represented by sub-nodes of a flash device. This can be used
-on platforms which have strong conventions about which portions of a flash are
-used for what purposes, but which don't use an on-flash partition table such
-as RedBoot.
-
-The partition table should be a subnode of the flash node and should be named
-'partitions'. This node should have the following property:
-- compatible : (required) must be "fixed-partitions"
-Partitions are then defined in subnodes of the partitions node.
+Deprecated: partitions defined in flash node
+============================================
 
 For backwards compatibility partitions as direct subnodes of the flash device are
 supported. This use is discouraged.
 NOTE: also for backwards compatibility, direct subnodes that have a compatible
 string are not considered partitions, as they may be used for other bindings.
-
-#address-cells & #size-cells must both be present in the partitions subnode of the
-flash device. There are two valid values for both:
-<1>: for partitions that require a single 32-bit cell to represent their
-     size/address (aka the value is below 4 GiB)
-<2>: for partitions that require two 32-bit cells to represent their
-     size/address (aka the value is 4 GiB or greater).
-
-Required properties:
-- reg : The partition's offset and size within the flash
-
-Optional properties:
-- label : The label / name for this partition.  If omitted, the label is taken
-  from the node name (excluding the unit address).
-- read-only : This parameter, if present, is a hint to Linux that this
-  partition should only be mounted read-only. This is usually used for flash
-  partitions containing early-boot firmware images or data which should not be
-  clobbered.
-- lock : Do not unlock the partition at initialization time (not supported on
-  all devices)
-
-Examples:
-
-
-flash@0 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0000000 0x100000>;
-			read-only;
-		};
-
-		uimage@100000 {
-			reg = <0x0100000 0x200000>;
-		};
-	};
-};
-
-flash@1 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <2>;
-
-		/* a 4 GiB partition */
-		partition@0 {
-			label = "filesystem";
-			reg = <0x00000000 0x1 0x00000000>;
-		};
-	};
-};
-
-flash@2 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <2>;
-		#size-cells = <2>;
-
-		/* an 8 GiB partition */
-		partition@0 {
-			label = "filesystem #1";
-			reg = <0x0 0x00000000 0x2 0x00000000>;
-		};
-
-		/* a 4 GiB partition */
-		partition@200000000 {
-			label = "filesystem #2";
-			reg = <0x2 0x00000000 0x1 0x00000000>;
-		};
-	};
-};
-
-flash@3 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x000000 0x100000>;
-			read-only;
-		};
-
-		firmware@100000 {
-			label = "firmware";
-			reg = <0x100000 0xe00000>;
-			compatible = "brcm,trx";
-		};
-
-		calibration@f00000 {
-			label = "calibration";
-			reg = <0xf00000 0x100000>;
-			compatible = "fixed-partitions";
-			ranges = <0 0xf00000 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "wifi0";
-				reg = <0x000000 0x080000>;
-			};
-
-			partition@80000 {
-				label = "wifi1";
-				reg = <0x080000 0x080000>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt
deleted file mode 100644
index d5c5616f6db5..000000000000
--- a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-ARM AFS - ARM Firmware Suite Partitions
-=======================================
-
-The ARM Firmware Suite is a flash partitioning system found on the
-ARM reference designs: Integrator AP, Integrator CP, Versatile AB,
-Versatile PB, the RealView family, Versatile Express and Juno.
-
-Required properties:
-- compatible : (required) must be "arm,arm-firmware-suite"
-
-Example:
-
-flash@0 {
-	partitions {
-		compatible = "arm,arm-firmware-suite";
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml
new file mode 100644
index 000000000000..76c88027b6d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/arm,arm-firmware-suite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Firmware Suite (AFS) Partitions
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The ARM Firmware Suite is a flash partitioning system found on the
+  ARM reference designs: Integrator AP, Integrator CP, Versatile AB,
+  Versatile PB, the RealView family, Versatile Express and Juno.
+
+properties:
+  compatible:
+    const: arm,arm-firmware-suite
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "arm,arm-firmware-suite";
+    };
+...
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
new file mode 100644
index 000000000000..7b113e5e3421
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/brcm,bcm4908-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4908 partitioning
+
+description: |
+  Broadcom BCM4908 CFE bootloader supports two firmware partitions. One is used
+  for regular booting, the other is treated as fallback.
+
+  This binding allows defining all fixed partitions and marking those containing
+  firmware. System can use that information e.g. for booting or flashing
+  purposes.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: brcm,bcm4908-partitions
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+patternProperties:
+  "^partition@[0-9a-f]+$":
+    $ref: "partition.yaml#"
+    properties:
+      compatible:
+        const: brcm,bcm4908-firmware
+    unevaluatedProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "brcm,bcm4908-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "cferom";
+            reg = <0x0 0x100000>;
+        };
+
+        partition@100000 {
+            compatible = "brcm,bcm4908-firmware";
+            reg = <0x100000 0xf00000>;
+        };
+
+        partition@1000000 {
+            compatible = "brcm,bcm4908-firmware";
+            reg = <0x1000000 0xf00000>;
+        };
+
+        partition@1f00000 {
+            label = "calibration";
+            reg = <0x1f00000 0x100000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt
deleted file mode 100644
index 1d61a029395e..000000000000
--- a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Broadcom BCM47xx Partitions
-===========================
-
-Broadcom is one of hardware manufacturers providing SoCs (BCM47xx) used in
-home routers. Their BCM947xx boards using CFE bootloader have several partitions
-without any on-flash partition table. On some devices their sizes and/or
-meanings can also vary so fixed partitioning can't be used.
-
-Discovering partitions on these devices is possible thanks to having a special
-header and/or magic signature at the beginning of each of them. They are also
-block aligned which is important for determinig a size.
-
-Most of partitions use ASCII text based magic for determining a type. More
-complex partitions (like TRX with its HDR0 magic) may include extra header
-containing some details, including a length.
-
-A list of supported partitions includes:
-1) Bootloader with Broadcom's CFE (Common Firmware Environment)
-2) NVRAM with configuration/calibration data
-3) Device manufacturer's data with some default values (e.g. SSIDs)
-4) TRX firmware container which can hold up to 4 subpartitions
-5) Backup TRX firmware used after failed upgrade
-
-As mentioned earlier, role of some partitions may depend on extra configuration.
-For example both: main firmware and backup firmware use the same TRX format with
-the same header. To distinguish currently used firmware a CFE's environment
-variable "bootpartition" is used.
-
-
-Devices using Broadcom partitions described above should should have flash node
-with a subnode named "partitions" using following properties:
-
-Required properties:
-- compatible : (required) must be "brcm,bcm947xx-cfe-partitions"
-
-Example:
-
-flash@0 {
-	partitions {
-		compatible = "brcm,bcm947xx-cfe-partitions";
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml
new file mode 100644
index 000000000000..3484e06d6bcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM47xx Partitions
+
+description: |
+  Broadcom is one of hardware manufacturers providing SoCs (BCM47xx) used in
+  home routers. Their BCM947xx boards using CFE bootloader have several
+  partitions without any on-flash partition table. On some devices their sizes
+  and/or meanings can also vary so fixed partitioning can't be used.
+
+  Discovering partitions on these devices is possible thanks to having a special
+  header and/or magic signature at the beginning of each of them. They are also
+  block aligned which is important for determinig a size.
+
+  Most of partitions use ASCII text based magic for determining a type. More
+  complex partitions (like TRX with its HDR0 magic) may include extra header
+  containing some details, including a length.
+
+  A list of supported partitions includes:
+  1) Bootloader with Broadcom's CFE (Common Firmware Environment)
+  2) NVRAM with configuration/calibration data
+  3) Device manufacturer's data with some default values (e.g. SSIDs)
+  4) TRX firmware container which can hold up to 4 subpartitions
+  5) Backup TRX firmware used after failed upgrade
+
+  As mentioned earlier, role of some partitions may depend on extra
+  configuration. For example both: main firmware and backup firmware use the
+  same TRX format with the same header. To distinguish currently used firmware a
+  CFE's environment variable "bootpartition" is used.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: brcm,bcm947xx-cfe-partitions
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "brcm,bcm947xx-cfe-partitions";
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt
index b677147ca4e1..c2175d3c82ec 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt
@@ -28,6 +28,11 @@ detected by a software parsing TRX header.
 Required properties:
 - compatible : (required) must be "brcm,trx"
 
+Optional properties:
+
+- brcm,trx-magic: TRX magic, if it is different from the default magic
+		  0x30524448 as a u32.
+
 Example:
 
 flash@0 {
diff --git a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
new file mode 100644
index 000000000000..ad3ccd250802
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fixed partitions
+
+description: |
+  This binding can be used on platforms which have strong conventions about
+  which portions of a flash are used for what purposes, but which don't use an
+  on-flash partition table such as RedBoot.
+
+  The partition table should be a node named "partitions". Partitions are then
+  defined as subnodes.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fixed-partitions
+      - items:
+          - const: sercomm,sc-partitions
+          - const: fixed-partitions
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+patternProperties:
+  "@[0-9a-f]+$":
+    allOf:
+      - $ref: "partition.yaml#"
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: sercomm,sc-partitions
+        then:
+          properties:
+            sercomm,scpart-id:
+              description: Partition id in Sercomm partition map. Mtd
+                parser uses this id to find a record in the partition map
+                containing offset and size of the current partition. The
+                values from partition map overrides partition offset and
+                size defined in reg property of the dts. Frequently these
+                values are the same, but may differ if device has bad
+                eraseblocks on a flash.
+              $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: true
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "u-boot";
+            reg = <0x0000000 0x100000>;
+            read-only;
+        };
+
+        uimage@100000 {
+            reg = <0x0100000 0x200000>;
+        };
+    };
+
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <2>;
+
+        /* a 4 GiB partition */
+        partition@0 {
+            label = "filesystem";
+            reg = <0x00000000 0x1 0x00000000>;
+        };
+    };
+
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        /* an 8 GiB partition */
+        partition@0 {
+            label = "filesystem #1";
+            reg = <0x0 0x00000000 0x2 0x00000000>;
+        };
+
+        /* a 4 GiB partition */
+        partition@200000000 {
+            label = "filesystem #2";
+            reg = <0x2 0x00000000 0x1 0x00000000>;
+        };
+    };
+
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "bootloader";
+            reg = <0x000000 0x100000>;
+            read-only;
+        };
+
+        firmware@100000 {
+            compatible = "brcm,trx";
+            label = "firmware";
+            reg = <0x100000 0xe00000>;
+        };
+
+        calibration@f00000 {
+            compatible = "fixed-partitions";
+            label = "calibration";
+            reg = <0xf00000 0x100000>;
+            ranges = <0 0xf00000 0x100000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            partition@0 {
+                label = "wifi0";
+                reg = <0x000000 0x080000>;
+            };
+
+            partition@80000 {
+                label = "wifi1";
+                reg = <0x080000 0x080000>;
+            };
+        };
+    };
+
+  - |
+    partitions {
+        compatible = "sercomm,sc-partitions", "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "u-boot";
+            reg = <0x0 0x100000>;
+            sercomm,scpart-id = <0>;
+            read-only;
+        };
+
+        partition@100000 {
+            label = "dynamic partition map";
+            reg = <0x100000 0x100000>;
+            sercomm,scpart-id = <1>;
+        };
+
+        partition@200000 {
+            label = "Factory";
+            reg = <0x200000 0x100000>;
+            sercomm,scpart-id = <2>;
+            read-only;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
new file mode 100644
index 000000000000..99249cdfbfb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/linksys,ns-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linksys Northstar partitioning
+
+description: |
+  Linksys devices based on Broadcom Northstar architecture often use two
+  firmware partitions. One is used for regular booting, the other is treated as
+  fallback.
+
+  This binding allows defining all fixed partitions and marking those containing
+  firmware. System can use that information e.g. for booting or flashing
+  purposes.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: linksys,ns-partitions
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+patternProperties:
+  "^partition@[0-9a-f]+$":
+    $ref: "partition.yaml#"
+    properties:
+      compatible:
+        items:
+          - const: linksys,ns-firmware
+          - const: brcm,trx
+    unevaluatedProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "linksys,ns-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "boot";
+            reg = <0x0 0x100000>;
+            read-only;
+        };
+
+        partition@100000 {
+            label = "nvram";
+            reg = <0x100000 0x100000>;
+        };
+
+        partition@200000 {
+            compatible = "linksys,ns-firmware", "brcm,trx";
+            reg = <0x200000 0xf00000>;
+        };
+
+        partition@1100000 {
+            compatible = "linksys,ns-firmware", "brcm,trx";
+            reg = <0x1100000 0xf00000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
new file mode 100644
index 000000000000..5cdd2efa9132
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/nvmem-cells.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nvmem cells
+
+description: |
+  Any partition containing the compatible "nvmem-cells" will register as a
+  nvmem provider.
+  Each direct subnodes represents a nvmem cell following the nvmem binding.
+  Nvmem binding to declare nvmem-cells can be found in:
+  Documentation/devicetree/bindings/nvmem/nvmem.yaml
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+allOf:
+  - $ref: /schemas/nvmem/nvmem.yaml#
+
+properties:
+  compatible:
+    const: nvmem-cells
+
+required:
+  - compatible
+
+additionalProperties: true
+
+examples:
+  - |
+    partitions {
+      compatible = "fixed-partitions";
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      /* ... */
+
+      };
+      art: art@1200000 {
+        compatible = "nvmem-cells";
+        reg = <0x1200000 0x0140000>;
+        label = "art";
+        read-only;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        macaddr_gmac1: macaddr_gmac1@0 {
+          reg = <0x0 0x6>;
+        };
+
+        macaddr_gmac2: macaddr_gmac2@6 {
+          reg = <0x6 0x6>;
+        };
+
+        pre_cal_24g: pre_cal_24g@1000 {
+          reg = <0x1000 0x2f20>;
+        };
+
+        pre_cal_5g: pre_cal_5g@5000{
+          reg = <0x5000 0x2f20>;
+        };
+      };
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "bootloader";
+            reg = <0x000000 0x100000>;
+            read-only;
+        };
+
+        firmware@100000 {
+            compatible = "brcm,trx";
+            label = "firmware";
+            reg = <0x100000 0xe00000>;
+        };
+
+        calibration@f00000 {
+            compatible = "nvmem-cells";
+            label = "calibration";
+            reg = <0xf00000 0x100000>;
+            ranges = <0 0xf00000 0x100000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            wifi0@0 {
+                reg = <0x000000 0x080000>;
+            };
+
+            wifi1@80000 {
+                reg = <0x080000 0x080000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
new file mode 100644
index 000000000000..f1a02d840b12
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/partition.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Partition
+
+description: |
+  This binding describes a single flash partition. Each partition must have its
+  relative offset and size specified. Depending on partition function extra
+  properties can be used.
+
+  A partition may be dynamically allocated by a specific parser at runtime.
+  In this specific case, a specific suffix is required to the node name.
+  Everything after 'partition-' will be used as the partition name to compare
+  with the one dynamically allocated by the specific parser.
+  If the partition contains invalid char a label can be provided that will
+  be used instead of the node name to make the comparison.
+  This is used to assign an OF node to the dynamiccally allocated partition
+  so that subsystem like NVMEM can provide an OF node and declare NVMEM cells.
+  The OF node will be assigned only if the partition label declared match the
+  one assigned by the parser at runtime.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  reg:
+    description: partition's offset and size within the flash
+    maxItems: 1
+
+  label:
+    description: The label / name for this partition. If omitted, the label
+      is taken from the node name (excluding the unit address).
+
+  read-only:
+    description: This parameter, if present, is a hint that this partition
+      should only be mounted read-only. This is usually used for flash
+      partitions containing early-boot firmware images or data which should
+      not be clobbered.
+    type: boolean
+
+  lock:
+    description: Do not unlock the partition at initialization time (not
+      supported on all devices)
+    type: boolean
+
+  slc-mode:
+    description: This parameter, if present, allows one to emulate SLC mode
+      on a partition attached to an MLC NAND thus making this partition
+      immune to paired-pages corruptions
+    type: boolean
+
+if:
+  not:
+    required: [ reg ]
+then:
+  properties:
+    $nodename:
+      pattern: '^partition-.*$'
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
new file mode 100644
index 000000000000..dc07909af023
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/qcom,smem-part.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SMEM NAND flash partition parser binding
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  The Qualcomm SoCs supporting the NAND controller interface features a Shared
+  Memory (SMEM) based partition table scheme. The maximum partitions supported
+  varies between partition table revisions. V3 supports maximum 16 partitions
+  and V4 supports 48 partitions.
+
+properties:
+  compatible:
+    const: qcom,smem-part
+
+patternProperties:
+  "^partition-[0-9a-z]+$":
+    $ref: partition.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    flash {
+        partitions {
+            compatible = "qcom,smem-part";
+        };
+    };
+
+  - |
+    /* Example declaring dynamic partition */
+    flash {
+      partitions {
+        compatible = "qcom,smem-part";
+
+        partition-art {
+          compatible = "nvmem-cells";
+          #address-cells = <1>;
+          #size-cells = <1>;
+          label = "0:art";
+
+          macaddr_art_0: macaddr@0 {
+            reg = <0x0 0x6>;
+          };
+
+          macaddr_art_6: macaddr@6 {
+            reg = <0x6 0x6>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt
deleted file mode 100644
index fd0ebe4e3415..000000000000
--- a/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-RedBoot FLASH Image System (FIS) Partitions
-===========================================
-
-The FLASH Image System (FIS) directory is a flash description
-format closely associated with the RedBoot boot loader.
-
-It uses one single flash eraseblock in the flash to store an index of
-all images in the flash.
-
-This block size will vary depending on flash but is typically
-32 KB in size.
-
-Required properties:
-- compatible : (required) must be "redboot-fis"
-- fis-index-block : (required) a index to the eraseblock containing
-  the FIS directory on this device. On a flash memory with 32KB
-  eraseblocks, 0 means the first eraseblock at 0x00000000, 1 means the
-  second eraseblock at 0x00008000 and so on.
-
-Example:
-
-flash@0 {
-	partitions {
-		compatible = "redboot-fis";
-		fis-index-block = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml
new file mode 100644
index 000000000000..fee8d81b5276
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/redboot-fis.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RedBoot FLASH Image System (FIS) Partitions
+
+description: The FLASH Image System (FIS) directory is a flash description
+    format closely associated with the RedBoot boot loader.
+    It uses one single flash eraseblock in the flash to store an index of
+    all images in the flash.
+    This block size will vary depending on flash but is typically
+    32 KB in size.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: redboot-fis
+
+  fis-index-block:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: a index to the eraseblock containing the FIS directory on this
+      device. On a flash memory with 32KB eraseblocks, 0 means the first
+      eraseblock at 0x00000000, 1 means the second eraseblock at 0x00008000 and so on.
+
+required:
+  - compatible
+  - fis-index-block
+
+additionalProperties: false
+
+examples:
+  - |
+    flash {
+      partitions {
+        compatible = "redboot-fis";
+        fis-index-block = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml b/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml
new file mode 100644
index 000000000000..8a88e7d16524
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/u-boot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-Boot bootloader partition
+
+description: |
+  U-Boot is a bootlodaer commonly used in embedded devices. It's almost always
+  located on some kind of flash device.
+
+  Device configuration is stored as a set of environment variables that are
+  located in a (usually standalone) block of data.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: partition.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,u-boot
+        description: |
+          Broadcom stores environment variables inside a U-Boot partition. They
+          can be identified by a custom header with magic value.
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            compatible = "brcm,u-boot";
+            reg = <0x0 0x100000>;
+            label = "u-boot";
+        };
+
+        partition@100000 {
+            reg = <0x100000 0x1ff00000>;
+            label = "firmware";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
new file mode 100644
index 000000000000..482a2c068740
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/qcom,nandc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm NAND controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq806x-nand
+      - qcom,ipq4019-nand
+      - qcom,ipq6018-nand
+      - qcom,ipq8074-nand
+      - qcom,sdx55-nand
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Core Clock
+      - description: Always ON Clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: aon
+
+  "#address-cells": true
+  "#size-cells": true
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    properties:
+      nand-bus-width:
+        const: 8
+
+      nand-ecc-strength:
+        enum: [1, 4, 8]
+
+      nand-ecc-step-size:
+        enum:
+          - 512
+
+allOf:
+  - $ref: "nand-controller.yaml#"
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,ipq806x-nand
+    then:
+      properties:
+        dmas:
+          items:
+            - description: rxtx DMA channel
+
+        dma-names:
+          items:
+            - const: rxtx
+
+        qcom,cmd-crci:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            Must contain the ADM command type CRCI block instance number
+            specified for the NAND controller on the given platform
+
+        qcom,data-crci:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            Must contain the ADM data type CRCI block instance number
+            specified for the NAND controller on the given platform
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-nand
+              - qcom,ipq6018-nand
+              - qcom,ipq8074-nand
+              - qcom,sdx55-nand
+
+    then:
+      properties:
+        dmas:
+          items:
+            - description: tx DMA channel
+            - description: rx DMA channel
+            - description: cmd DMA channel
+
+        dma-names:
+          items:
+            - const: tx
+            - const: rx
+            - const: cmd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq806x-nand
+
+    then:
+      properties:
+        qcom,boot-partitions:
+          $ref: /schemas/types.yaml#/definitions/uint32-matrix
+          items:
+            items:
+              - description: offset
+              - description: size
+          description:
+            Boot partition use a different layout where the 4 bytes of spare
+            data are not protected by ECC. Use this to declare these special
+            partitions by defining first the offset and then the size.
+
+            It's in the form of <offset1 size1 offset2 size2 offset3 ...>
+            and should be declared in ascending order.
+
+            Refer to the ipq8064 example on how to use this special binding.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    nand-controller@1ac00000 {
+      compatible = "qcom,ipq806x-nand";
+      reg = <0x1ac00000 0x800>;
+
+      clocks = <&gcc EBI2_CLK>,
+               <&gcc EBI2_AON_CLK>;
+      clock-names = "core", "aon";
+
+      dmas = <&adm_dma 3>;
+      dma-names = "rxtx";
+      qcom,cmd-crci = <15>;
+      qcom,data-crci = <3>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+
+        nand-ecc-strength = <4>;
+        nand-bus-width = <8>;
+
+        qcom,boot-partitions = <0x0 0x58a0000>;
+
+        partitions {
+          compatible = "fixed-partitions";
+          #address-cells = <1>;
+          #size-cells = <1>;
+
+          partition@0 {
+            label = "boot-nand";
+            reg = <0 0x58a0000>;
+          };
+
+          partition@58a0000 {
+            label = "fs-nand";
+            reg = <0x58a0000 0x4000000>;
+          };
+        };
+      };
+    };
+
+    #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+    nand-controller@79b0000 {
+      compatible = "qcom,ipq4019-nand";
+      reg = <0x79b0000 0x1000>;
+
+      clocks = <&gcc GCC_QPIC_CLK>,
+               <&gcc GCC_QPIC_AHB_CLK>;
+      clock-names = "core", "aon";
+
+      dmas = <&qpicbam 0>,
+             <&qpicbam 1>,
+             <&qpicbam 2>;
+      dma-names = "tx", "rx", "cmd";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+        nand-ecc-strength = <4>;
+        nand-bus-width = <8>;
+
+        partitions {
+          compatible = "fixed-partitions";
+          #address-cells = <1>;
+          #size-cells = <1>;
+
+          partition@0 {
+            label = "boot-nand";
+            reg = <0 0x58a0000>;
+          };
+
+          partition@58a0000 {
+            label = "fs-nand";
+            reg = <0x58a0000 0x4000000>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
deleted file mode 100644
index 5c2fba4b30fe..000000000000
--- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-* Qualcomm NAND controller
-
-Required properties:
-- compatible:		must be one of the following:
-    * "qcom,ipq806x-nand" - for EBI2 NAND controller being used in IPQ806x
-			    SoC and it uses ADM DMA
-    * "qcom,ipq4019-nand" - for QPIC NAND controller v1.4.0 being used in
-                            IPQ4019 SoC and it uses BAM DMA
-    * "qcom,ipq8074-nand" - for QPIC NAND controller v1.5.0 being used in
-                            IPQ8074 SoC and it uses BAM DMA
-
-- reg:			MMIO address range
-- clocks:		must contain core clock and always on clock
-- clock-names:		must contain "core" for the core clock and "aon" for the
-			always on clock
-
-EBI2 specific properties:
-- dmas:			DMA specifier, consisting of a phandle to the ADM DMA
-			controller node and the channel number to be used for
-			NAND. Refer to dma.txt and qcom_adm.txt for more details
-- dma-names:		must be "rxtx"
-- qcom,cmd-crci:	must contain the ADM command type CRCI block instance
-			number specified for the NAND controller on the given
-			platform
-- qcom,data-crci:	must contain the ADM data type CRCI block instance
-			number specified for the NAND controller on the given
-			platform
-
-QPIC specific properties:
-- dmas:			DMA specifier, consisting of a phandle to the BAM DMA
-			and the channel number to be used for NAND. Refer to
-			dma.txt, qcom_bam_dma.txt for more details
-- dma-names:		must contain all 3 channel names : "tx", "rx", "cmd"
-- #address-cells:	<1> - subnodes give the chip-select number
-- #size-cells:		<0>
-
-* NAND chip-select
-
-Each controller may contain one or more subnodes to represent enabled
-chip-selects which (may) contain NAND flash chips. Their properties are as
-follows.
-
-Required properties:
-- reg:			a single integer representing the chip-select
-			number (e.g., 0, 1, 2, etc.)
-- #address-cells:	see partition.txt
-- #size-cells:		see partition.txt
-
-Optional properties:
-- nand-bus-width:	see nand-controller.yaml
-- nand-ecc-strength:	see nand-controller.yaml. If not specified, then ECC strength will
-			be used according to chip requirement and available
-			OOB size.
-
-Each nandcs device node may optionally contain a 'partitions' sub-node, which
-further contains sub-nodes describing the flash partition mapping. See
-partition.txt for more detail.
-
-Example:
-
-nand-controller@1ac00000 {
-	compatible = "qcom,ipq806x-nand";
-	reg = <0x1ac00000 0x800>;
-
-	clocks = <&gcc EBI2_CLK>,
-		 <&gcc EBI2_AON_CLK>;
-	clock-names = "core", "aon";
-
-	dmas = <&adm_dma 3>;
-	dma-names = "rxtx";
-	qcom,cmd-crci = <15>;
-	qcom,data-crci = <3>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand@0 {
-		reg = <0>;
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "boot-nand";
-				reg = <0 0x58a0000>;
-			};
-
-			partition@58a0000 {
-				label = "fs-nand";
-				reg = <0x58a0000 0x4000000>;
-			};
-		};
-	};
-};
-
-nand-controller@79b0000 {
-	compatible = "qcom,ipq4019-nand";
-	reg = <0x79b0000 0x1000>;
-
-	clocks = <&gcc GCC_QPIC_CLK>,
-		<&gcc GCC_QPIC_AHB_CLK>;
-	clock-names = "core", "aon";
-
-	dmas = <&qpicbam 0>,
-		<&qpicbam 1>,
-		<&qpicbam 2>;
-	dma-names = "tx", "rx", "cmd";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand@0 {
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "boot-nand";
-				reg = <0 0x58a0000>;
-			};
-
-			partition@58a0000 {
-				label = "fs-nand";
-				reg = <0x58a0000 0x4000000>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml b/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml
new file mode 100644
index 000000000000..f0dc78bb0515
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/renesas-nandc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen3 & RZ/N1x NAND flash controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: "nand-controller.yaml"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a06g032-nandc
+          - const: renesas,rzn1-nandc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: APB host controller clock
+      - description: External NAND bus clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: eclk
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    nand-controller@40102000 {
+        compatible = "renesas,r9a06g032-nandc", "renesas,rzn1-nandc";
+        reg = <0x40102000 0x2000>;
+        interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>;
+        clock-names = "hclk", "eclk";
+        power-domains = <&sysctrl>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
new file mode 100644
index 000000000000..d681a4676f06
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/rockchip,nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoCs NAND FLASH Controller (NFC)
+
+allOf:
+  - $ref: "nand-controller.yaml#"
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,px30-nfc
+      - const: rockchip,rk2928-nfc
+      - const: rockchip,rv1108-nfc
+      - items:
+          - const: rockchip,rk3036-nfc
+          - const: rockchip,rk2928-nfc
+      - items:
+          - const: rockchip,rk3308-nfc
+          - const: rockchip,rv1108-nfc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ahb
+      - const: nfc
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^nand@[0-7]$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      nand-ecc-mode:
+        const: hw
+
+      nand-ecc-step-size:
+        const: 1024
+
+      nand-ecc-strength:
+        enum: [16, 24, 40, 60, 70]
+        description: |
+          The ECC configurations that can be supported are as follows.
+            NFC v600 ECC 16, 24, 40, 60
+              RK2928, RK3066, RK3188
+
+            NFC v622 ECC 16, 24, 40, 60
+              RK3036, RK3128
+
+            NFC v800 ECC 16
+              RK3308, RV1108
+
+            NFC v900 ECC 16, 40, 60, 70
+              RK3326, PX30
+
+      nand-bus-width:
+        const: 8
+
+      rockchip,boot-blks:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 2
+        default: 16
+        description:
+          The NFC driver need this information to select ECC
+          algorithms supported by the boot ROM.
+          Only used in combination with 'nand-is-boot-medium'.
+
+      rockchip,boot-ecc-strength:
+        enum: [16, 24, 40, 60, 70]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          If specified it indicates that a different BCH/ECC setting is
+          supported by the boot ROM.
+            NFC v600 ECC 16, 24
+              RK2928, RK3066, RK3188
+
+            NFC v622 ECC 16, 24, 40, 60
+              RK3036, RK3128
+
+            NFC v800 ECC 16
+              RK3308, RV1108
+
+            NFC v900 ECC 16, 70
+              RK3326, PX30
+
+          Only used in combination with 'nand-is-boot-medium'.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3308-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    nfc: nand-controller@ff4b0000 {
+      compatible = "rockchip,rk3308-nfc",
+                   "rockchip,rv1108-nfc";
+      reg = <0xff4b0000 0x4000>;
+      interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+      clock-names = "ahb", "nfc";
+      assigned-clocks = <&clks SCLK_NANDC>;
+      assigned-clock-rates = <150000000>;
+
+      pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
+                   &flash_rdn &flash_rdy &flash_wrn>;
+      pinctrl-names = "default";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+        label = "rk-nand";
+        nand-bus-width = <8>;
+        nand-ecc-mode = "hw";
+        nand-ecc-step-size = <1024>;
+        nand-ecc-strength = <16>;
+        nand-is-boot-medium;
+        rockchip,boot-blks = <8>;
+        rockchip,boot-ecc-strength = <16>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.txt b/Documentation/devicetree/bindings/mtd/spi-nand.txt
deleted file mode 100644
index 8b51f3b6d55c..000000000000
--- a/Documentation/devicetree/bindings/mtd/spi-nand.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-SPI NAND flash
-
-Required properties:
-- compatible: should be "spi-nand"
-- reg: should encode the chip-select line used to access the NAND chip
diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.yaml b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
new file mode 100644
index 000000000000..4d095e613204
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/spi-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-NAND flash
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: "nand-chip.yaml#"
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: spi-nand
+
+  reg:
+    description: Encode the chip-select line on the SPI bus
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
index b059267f6d20..eab8ea3da1fa 100644
--- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -7,34 +7,21 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
 
 maintainers:
-  - Christophe Kerello <christophe.kerello@st.com>
-
-allOf:
-  - $ref: "nand-controller.yaml#"
+  - Christophe Kerello <christophe.kerello@foss.st.com>
 
 properties:
   compatible:
-    const: st,stm32mp15-fmc2
+    enum:
+      - st,stm32mp15-fmc2
+      - st,stm32mp1-fmc2-nfc
 
   reg:
-    items:
-      - description: Registers
-      - description: Chip select 0 data
-      - description: Chip select 0 command
-      - description: Chip select 0 address space
-      - description: Chip select 1 data
-      - description: Chip select 1 command
-      - description: Chip select 1 address space
+    minItems: 6
+    maxItems: 7
 
   interrupts:
     maxItems: 1
 
-  clocks:
-    maxItems: 1
-
-  resets:
-    maxItems: 1
-
   dmas:
     items:
       - description: tx DMA channel
@@ -55,13 +42,59 @@ patternProperties:
         const: 512
 
       nand-ecc-strength:
-        enum: [1, 4 ,8 ]
+        enum: [1, 4, 8]
+
+allOf:
+  - $ref: "nand-controller.yaml#"
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp15-fmc2
+    then:
+      properties:
+        reg:
+          items:
+            - description: Registers
+            - description: Chip select 0 data
+            - description: Chip select 0 command
+            - description: Chip select 0 address space
+            - description: Chip select 1 data
+            - description: Chip select 1 command
+            - description: Chip select 1 address space
+
+        clocks:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+      required:
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp1-fmc2-nfc
+    then:
+      properties:
+        reg:
+          items:
+            - description: Chip select 0 data
+            - description: Chip select 0 command
+            - description: Chip select 0 address space
+            - description: Chip select 1 data
+            - description: Chip select 1 command
+            - description: Chip select 1 address space
 
 required:
   - compatible
   - reg
   - interrupts
-  - clocks
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -77,13 +110,13 @@ examples:
             <0x81000000 0x1000>,
             <0x89010000 0x1000>,
             <0x89020000 0x1000>;
-            interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-            dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>,
-                   <&mdma1 20 0x10 0x12000a08 0x0 0x0>,
-                   <&mdma1 21 0x10 0x12000a0a 0x0 0x0>;
-            dma-names = "tx", "rx", "ecc";
-            clocks = <&rcc FMC_K>;
-            resets = <&rcc FMC_R>;
+      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+      dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+             <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+             <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+      dma-names = "tx", "rx", "ecc";
+      clocks = <&rcc FMC_K>;
+      resets = <&rcc FMC_R>;
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/mtd/tango-nand.txt b/Documentation/devicetree/bindings/mtd/tango-nand.txt
deleted file mode 100644
index 91c8420241af..000000000000
--- a/Documentation/devicetree/bindings/mtd/tango-nand.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Sigma Designs Tango4 NAND Flash Controller (NFC)
-
-Required properties:
-
-- compatible: "sigma,smp8758-nand"
-- reg: address/size of nfc_reg, nfc_mem, and pbus_reg
-- dmas: reference to the DMA channel used by the controller
-- dma-names: "rxtx"
-- clocks: reference to the system clock
-- #address-cells: <1>
-- #size-cells: <0>
-
-Children nodes represent the available NAND chips.
-See Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
-
-Example:
-
-	nandc: nand-controller@2c000 {
-		compatible = "sigma,smp8758-nand";
-		reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>;
-		dmas = <&dma0 3>;
-		dma-names = "rxtx";
-		clocks = <&clkgen SYS_CLK>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		nand@0 {
-			reg = <0>; /* CS0 */
-			nand-ecc-strength = <14>;
-			nand-ecc-step-size = <1024>;
-		};
-
-		nand@1 {
-			reg = <1>; /* CS1 */
-			nand-ecc-strength = <14>;
-			nand-ecc-step-size = <1024>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
deleted file mode 100644
index faa81c2e5da6..000000000000
--- a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Bindings for HyperBus Memory Controller (HBMC) on TI's K3 family of SoCs
-
-Required properties:
-- compatible : "ti,am654-hbmc" for AM654 SoC
-- reg : Two entries:
-	First entry pointed to the register space of HBMC controller
-	Second entry pointing to the memory map region dedicated for
-	MMIO access to attached flash devices
-- ranges : Address translation from offset within CS to allocated MMIO
-	   space in SoC
-
-Optional properties:
-- mux-controls : phandle to the multiplexer that controls selection of
-		 HBMC vs OSPI inside Flash SubSystem (FSS). Default is OSPI,
-		 if property is absent.
-		 See Documentation/devicetree/bindings/mux/reg-mux.txt
-		 for mmio-mux binding details
-
-Example:
-
-	system-controller@47000000 {
-		compatible = "syscon", "simple-mfd";
-		reg = <0x0 0x47000000 0x0 0x100>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		hbmc_mux: multiplexer {
-			compatible = "mmio-mux";
-			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4 0x2>; /* 0: reg 0x4, bit 1 */
-		};
-	};
-
-	hbmc: hyperbus@47034000 {
-		compatible = "ti,am654-hbmc";
-		reg = <0x0 0x47034000 0x0 0x100>,
-			<0x5 0x00000000 0x1 0x0000000>;
-		power-domains = <&k3_pds 55>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */
-			 <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */
-		mux-controls = <&hbmc_mux 0>;
-
-		/* Slave flash node */
-		flash@0,0 {
-			compatible = "cypress,hyperflash", "cfi-flash";
-			reg = <0x0 0x0 0x4000000>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml
new file mode 100644
index 000000000000..30b458c41cac
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,am654-hbmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HyperBus Memory Controller (HBMC) on TI's K3 family of SoCs
+
+maintainers:
+  - Vignesh Raghavendra <vigneshr@ti.com>
+
+properties:
+  compatible:
+    const: ti,am654-hbmc
+
+  reg:
+    maxItems: 2
+
+  power-domains: true
+  '#address-cells': true
+  '#size-cells': true
+  ranges: true
+
+  mux-controls:
+    description: MMIO mux controller node to select b/w OSPI and HBMC.
+
+  clocks:
+    maxItems: 1
+
+patternProperties:
+  "^flash@[0-1],[0-9a-f]+$":
+    type: object
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - clocks
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      hbmc: memory-controller@47034000 {
+        compatible = "ti,am654-hbmc";
+        reg = <0x0 0x47034000 0x0 0x100>,
+              <0x5 0x00000000 0x1 0x0000000>;
+        ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */
+                 <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */
+        clocks = <&k3_clks 102 0>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        power-domains = <&k3_pds 55>;
+        mux-controls = <&hbmc_mux 0>;
+
+        flash@0,0 {
+            compatible = "cypress,hyperflash", "cfi-flash";
+            reg = <0x0 0x0 0x4000000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/ti,elm.yaml b/Documentation/devicetree/bindings/mtd/ti,elm.yaml
new file mode 100644
index 000000000000..87128c004596
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,elm.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,elm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Error Location Module (ELM).
+
+maintainers:
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  ELM module is used together with GPMC and NAND Flash to detect
+  errors and the location of the error based on BCH algorithms
+  so they can be corrected if possible.
+
+properties:
+  compatible:
+    enum:
+      - ti,am3352-elm
+      - ti,am64-elm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Functional clock.
+
+  clock-names:
+    items:
+      - const: fck
+
+  power-domains:
+    maxItems: 1
+
+  ti,hwmods:
+    description:
+      Name of the HWMOD associated with ELM. This is for legacy
+      platforms only.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am64-elm
+    then:
+      required:
+        - clocks
+        - clock-names
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    elm: ecc@0 {
+        compatible = "ti,am3352-elm";
+        reg = <0x0 0x2000>;
+        interrupts = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
new file mode 100644
index 000000000000..4ac198814b7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,gpmc-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments GPMC NAND Flash controller.
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  GPMC NAND controller/Flash is represented as a child of the
+  GPMC controller node.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,am64-nand
+          - ti,omap2-nand
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Interrupt for fifoevent
+      - description: Interrupt for termcount
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  ti,nand-ecc-opt:
+    description: Desired ECC algorithm
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [sw, ham1, bch4, bch8, bch16]
+
+  ti,nand-xfer-type:
+    description: Data transfer method between controller and chip.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [prefetch-polled, polled, prefetch-dma, prefetch-irq]
+    default: prefetch-polled
+
+  ti,elm-id:
+    description:
+      phandle to the ELM (Error Location Module).
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nand-bus-width:
+    description:
+      Bus width to the NAND chip
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+    default: 8
+
+  rb-gpios:
+    description:
+      GPIO connection to R/B signal from NAND chip
+    maxItems: 1
+
+patternProperties:
+  "@[0-9a-f]+$":
+    $ref: "/schemas/mtd/partitions/partition.yaml"
+
+allOf:
+  - $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml"
+
+required:
+  - compatible
+  - reg
+  - ti,nand-ecc-opt
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpmc: memory-controller@50000000 {
+      compatible = "ti,am3352-gpmc";
+      dmas = <&edma 52 0>;
+      dma-names = "rxtx";
+      clocks = <&l3s_gclk>;
+      clock-names = "fck";
+      reg = <0x50000000 0x2000>;
+      interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+      gpmc,num-cs = <7>;
+      gpmc,num-waitpins = <2>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      gpio-controller;
+      #gpio-cells = <2>;
+
+      ranges = <0 0 0x08000000 0x01000000>;   /* CS0 space. Min partition = 16MB */
+      nand@0,0 {
+        compatible = "ti,omap2-nand";
+        reg = <0 0 4>;          /* device IO registers */
+        interrupt-parent = <&gpmc>;
+        interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+                     <1 IRQ_TYPE_NONE>; /* termcount */
+        ti,nand-xfer-type = "prefetch-dma";
+        ti,nand-ecc-opt = "bch16";
+        ti,elm-id = <&elm>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        /* NAND generic properties */
+        nand-bus-width = <8>;
+        rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;  /* gpmc_wait0 */
+
+        /* GPMC properties*/
+        gpmc,device-width = <1>;
+
+        partition@0 {
+          label = "NAND.SPL";
+          reg = <0x00000000 0x00040000>;
+        };
+        partition@1 {
+          label = "NAND.SPL.backup1";
+          reg = <0x00040000 0x00040000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml
new file mode 100644
index 000000000000..a953f7397c40
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,gpmc-onenand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OneNAND over Texas Instruments GPMC bus.
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  GPMC connected OneNAND (found on OMAP boards) are represented
+  as child nodes of the GPMC controller.
+
+properties:
+  compatible:
+    const: ti,omap2-onenand
+
+  reg:
+    items:
+      - description: |
+          Chip Select number, register offset and size of
+          OneNAND register window.
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  int-gpios:
+    description: GPIO specifier for the INT pin.
+
+patternProperties:
+  "@[0-9a-f]+$":
+    $ref: "/schemas/mtd/partitions/partition.yaml"
+
+allOf:
+  - $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml"
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gpmc: memory-controller@6e000000 {
+      compatible = "ti,omap3430-gpmc";
+      reg = <0x6e000000 0x02d0>;
+      interrupts = <20>;
+      gpmc,num-cs = <8>;
+      gpmc,num-waitpins = <4>;
+      clocks = <&l3s_clkctrl>;
+      clock-names = "fck";
+      #address-cells = <2>;
+      #size-cells = <1>;
+
+      ranges = <0 0 0x01000000 0x01000000>,   /* 16 MB for OneNAND */
+               <1 0 0x02000000 0x01000000>;   /* 16 MB for smc91c96 */
+
+      onenand@0,0 {
+        compatible = "ti,omap2-onenand";
+        reg = <0 0 0x20000>;    /* CS0, offset 0, IO size 128K */
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+          label = "bootloader";
+          reg = <0x00000000 0x00100000>;
+        };
+
+        partition@100000 {
+          label = "config";
+          reg = <0x00100000 0x002c0000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mux/adi,adg792a.txt b/Documentation/devicetree/bindings/mux/adi,adg792a.txt
index 96b787a69f50..b0e5bf6903d8 100644
--- a/Documentation/devicetree/bindings/mux/adi,adg792a.txt
+++ b/Documentation/devicetree/bindings/mux/adi,adg792a.txt
@@ -5,7 +5,7 @@ Required properties:
 - #mux-control-cells : <0> if parallel (the three muxes are bound together
   with a single mux controller controlling all three muxes), or <1> if
   not (one mux controller for each mux).
-* Standard mux-controller bindings as described in mux-controller.txt
+* Standard mux-controller bindings as described in mux-controller.yaml
 
 Optional properties for ADG792G:
 - gpio-controller : if present, #gpio-cells below is required.
diff --git a/Documentation/devicetree/bindings/mux/adi,adgs1408.txt b/Documentation/devicetree/bindings/mux/adi,adgs1408.txt
index be6947f4d86b..453a38961c13 100644
--- a/Documentation/devicetree/bindings/mux/adi,adgs1408.txt
+++ b/Documentation/devicetree/bindings/mux/adi,adgs1408.txt
@@ -4,7 +4,7 @@ Required properties:
 - compatible : Should be one of
 	* "adi,adgs1408"
 	* "adi,adgs1409"
-* Standard mux-controller bindings as described in mux-controller.txt
+* Standard mux-controller bindings as described in mux-controller.yaml
 
 Optional properties for ADGS1408/1409:
 - gpio-controller : if present, #gpio-cells is required.
diff --git a/Documentation/devicetree/bindings/mux/gpio-mux.txt b/Documentation/devicetree/bindings/mux/gpio-mux.txt
deleted file mode 100644
index b8f746344d80..000000000000
--- a/Documentation/devicetree/bindings/mux/gpio-mux.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-GPIO-based multiplexer controller bindings
-
-Define what GPIO pins are used to control a multiplexer. Or several
-multiplexers, if the same pins control more than one multiplexer.
-
-Required properties:
-- compatible : "gpio-mux"
-- mux-gpios : list of gpios used to control the multiplexer, least
-	      significant bit first.
-- #mux-control-cells : <0>
-* Standard mux-controller bindings as decribed in mux-controller.txt
-
-Optional properties:
-- idle-state : if present, the state the mux will have when idle. The
-	       special state MUX_IDLE_AS_IS is the default.
-
-The multiplexer state is defined as the number represented by the
-multiplexer GPIO pins, where the first pin is the least significant
-bit. An active pin is a binary 1, an inactive pin is a binary 0.
-
-Example:
-
-	mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
-			    <&pioA 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	adc-mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 0>;
-		io-channel-names = "parent";
-
-		mux-controls = <&mux>;
-
-		channels = "sync-1", "in", "out", "sync-2";
-	};
-
-	i2c-mux {
-		compatible = "i2c-mux";
-		i2c-parent = <&i2c1>;
-
-		mux-controls = <&mux>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ssd1307: oled@3c {
-				/* ... */
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				/* ... */
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mux/gpio-mux.yaml b/Documentation/devicetree/bindings/mux/gpio-mux.yaml
new file mode 100644
index 000000000000..ee4de9fbaf4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/gpio-mux.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/gpio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based multiplexer controller bindings
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |+
+  Define what GPIO pins are used to control a multiplexer. Or several
+  multiplexers, if the same pins control more than one multiplexer.
+
+  The multiplexer state is defined as the number represented by the
+  multiplexer GPIO pins, where the first pin is the least significant
+  bit. An active pin is a binary 1, an inactive pin is a binary 0.
+
+properties:
+  compatible:
+    const: gpio-mux
+
+  mux-gpios:
+    description:
+      List of gpios used to control the multiplexer, least significant bit first.
+
+  '#mux-control-cells':
+    enum: [ 0, 1 ]
+
+  '#mux-state-cells':
+    enum: [ 1, 2 ]
+
+  idle-state:
+    default: -1
+
+required:
+  - compatible
+  - mux-gpios
+anyOf:
+  - required:
+      - "#mux-control-cells"
+  - required:
+      - "#mux-state-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mux: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+              <&pioA 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    adc-mux {
+        compatible = "io-channel-mux";
+        io-channels = <&adc 0>;
+        io-channel-names = "parent";
+
+        mux-controls = <&mux>;
+
+        channels = "sync-1", "in", "out", "sync-2";
+    };
+
+    i2c-mux {
+        compatible = "i2c-mux";
+        i2c-parent = <&i2c1>;
+
+        mux-controls = <&mux>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c@0 {
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ssd1307: oled@3c {
+                reg = <0x3c>;
+            };
+        };
+
+        i2c@3 {
+            reg = <3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pca9555: pca9555@20 {
+                reg = <0x20>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mux/mux-consumer.yaml b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
new file mode 100644
index 000000000000..d3d854967359
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/mux-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common multiplexer controller consumer bindings
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  Mux controller consumers should specify a list of mux controllers that they
+  want to use with a property containing a 'mux-ctrl-list':
+
+    mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list]
+    single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier]
+    mux-ctrl-phandle : phandle to mux controller node
+    mux-ctrl-specifier : array of #mux-control-cells specifying the
+                         given mux controller (controller specific)
+
+  Mux controller properties should be named "mux-controls". The exact meaning of
+  each mux controller property must be documented in the device tree binding for
+  each consumer. An optional property "mux-control-names" may contain a list of
+  strings to label each of the mux controllers listed in the "mux-controls"
+  property.
+
+  If it is required to provide the state that the mux controller needs to
+  be set to, the property "mux-states" must be used. An optional property
+  "mux-state-names" can be used to provide a list of strings, to label
+  each of the multiplixer states listed in the "mux-states" property.
+
+  Properties "mux-controls" and "mux-states" can be used depending on how
+  the consumers want to control the mux controller. If the consumer needs
+  needs to set multiple states in a mux controller, then property
+  "mux-controls" can be used. If the consumer needs to set the mux
+  controller to a given state then property "mux-states" can be used.
+
+  mux-ctrl-specifier typically encodes the chip-relative mux controller number.
+  If the mux controller chip only provides a single mux controller, the
+  mux-ctrl-specifier can typically be left out.
+
+select: true
+
+properties:
+  mux-controls:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  mux-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  mux-control-names:
+    description:
+      Devices that use more than a single mux controller can use the
+      "mux-control-names" property to map the name of the requested mux
+      controller to an index into the list given by the "mux-controls" property.
+
+  mux-state-names:
+    description:
+      Devices that use more than a single multiplexer state can use the
+      "mux-state-names" property to map the name of the requested mux
+      controller to an index into the list given by the "mux-states"
+      property.
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/mux/mux-controller.txt b/Documentation/devicetree/bindings/mux/mux-controller.txt
deleted file mode 100644
index 4f47e4bd2fa0..000000000000
--- a/Documentation/devicetree/bindings/mux/mux-controller.txt
+++ /dev/null
@@ -1,157 +0,0 @@
-Common multiplexer controller bindings
-======================================
-
-A multiplexer (or mux) controller will have one, or several, consumer devices
-that uses the mux controller. Thus, a mux controller can possibly control
-several parallel multiplexers. Presumably there will be at least one
-multiplexer needed by each consumer, but a single mux controller can of course
-control several multiplexers for a single consumer.
-
-A mux controller provides a number of states to its consumers, and the state
-space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
-0-7 for an 8-way multiplexer, etc.
-
-
-Consumers
----------
-
-Mux controller consumers should specify a list of mux controllers that they
-want to use with a property containing a 'mux-ctrl-list':
-
-	mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list]
-	single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier]
-	mux-ctrl-phandle : phandle to mux controller node
-	mux-ctrl-specifier : array of #mux-control-cells specifying the
-			     given mux controller (controller specific)
-
-Mux controller properties should be named "mux-controls". The exact meaning of
-each mux controller property must be documented in the device tree binding for
-each consumer. An optional property "mux-control-names" may contain a list of
-strings to label each of the mux controllers listed in the "mux-controls"
-property.
-
-Drivers for devices that use more than a single mux controller can use the
-"mux-control-names" property to map the name of the requested mux controller
-to an index into the list given by the "mux-controls" property.
-
-mux-ctrl-specifier typically encodes the chip-relative mux controller number.
-If the mux controller chip only provides a single mux controller, the
-mux-ctrl-specifier can typically be left out.
-
-Example:
-
-	/* One consumer of a 2-way mux controller (one GPIO-line) */
-	mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>;
-	};
-
-	adc-mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 0>;
-		io-channel-names = "parent";
-
-		mux-controls = <&mux>;
-		mux-control-names = "adc";
-
-		channels = "sync", "in";
-	};
-
-Note that in the example above, specifying the "mux-control-names" is redundant
-because there is only one mux controller in the list. However, if the driver
-for the consumer node in fact asks for a named mux controller, that name is of
-course still required.
-
-	/*
-	 * Two consumers (one for an ADC line and one for an i2c bus) of
-	 * parallel 4-way multiplexers controlled by the same two GPIO-lines.
-	 */
-	mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
-			    <&pioA 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	adc-mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 0>;
-		io-channel-names = "parent";
-
-		mux-controls = <&mux>;
-
-		channels = "sync-1", "in", "out", "sync-2";
-	};
-
-	i2c-mux {
-		compatible = "i2c-mux";
-		i2c-parent = <&i2c1>;
-
-		mux-controls = <&mux>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ssd1307: oled@3c {
-				/* ... */
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				/* ... */
-			};
-		};
-	};
-
-
-Mux controller nodes
---------------------
-
-Mux controller nodes must specify the number of cells used for the
-specifier using the '#mux-control-cells' property.
-
-Optionally, mux controller nodes can also specify the state the mux should
-have when it is idle. The idle-state property is used for this. If the
-idle-state is not present, the mux controller is typically left as is when
-it is idle. For multiplexer chips that expose several mux controllers, the
-idle-state property is an array with one idle state for each mux controller.
-
-The special value (-1) may be used to indicate that the mux should be left
-as is when it is idle. This is the default, but can still be useful for
-mux controller chips with more than one mux controller, particularly when
-there is a need to "step past" a mux controller and set some other idle
-state for a mux controller with a higher index.
-
-Some mux controllers have the ability to disconnect the input/output of the
-multiplexer. Using this disconnected high-impedance state as the idle state
-is indicated with idle state (-2).
-
-These constants are available in
-
-      #include <dt-bindings/mux/mux.h>
-
-as MUX_IDLE_AS_IS (-1) and MUX_IDLE_DISCONNECT (-2).
-
-An example mux controller node look like this (the adg972a chip is a triple
-4-way multiplexer):
-
-	mux: mux-controller@50 {
-		compatible = "adi,adg792a";
-		reg = <0x50>;
-		#mux-control-cells = <1>;
-
-		idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 2>;
-	};
diff --git a/Documentation/devicetree/bindings/mux/mux-controller.yaml b/Documentation/devicetree/bindings/mux/mux-controller.yaml
new file mode 100644
index 000000000000..c855fbad3884
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/mux-controller.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/mux-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common multiplexer controller provider bindings
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  A multiplexer (or mux) controller will have one, or several, consumer devices
+  that uses the mux controller. Thus, a mux controller can possibly control
+  several parallel multiplexers. Presumably there will be at least one
+  multiplexer needed by each consumer, but a single mux controller can of course
+  control several multiplexers for a single consumer.
+
+  A mux controller provides a number of states to its consumers, and the state
+  space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
+  0-7 for an 8-way multiplexer, etc.
+
+
+  Mux controller nodes
+  --------------------
+
+  Mux controller nodes must specify the number of cells used for the
+  specifier using the '#mux-control-cells' or '#mux-state-cells' property.
+  The value of '#mux-state-cells' will always be one greater than the value
+  of '#mux-control-cells'.
+
+  Optionally, mux controller nodes can also specify the state the mux should
+  have when it is idle. The idle-state property is used for this. If the
+  idle-state is not present, the mux controller is typically left as is when
+  it is idle. For multiplexer chips that expose several mux controllers, the
+  idle-state property is an array with one idle state for each mux controller.
+
+  The special value (-1) may be used to indicate that the mux should be left
+  as is when it is idle. This is the default, but can still be useful for
+  mux controller chips with more than one mux controller, particularly when
+  there is a need to "step past" a mux controller and set some other idle
+  state for a mux controller with a higher index.
+
+  Some mux controllers have the ability to disconnect the input/output of the
+  multiplexer. Using this disconnected high-impedance state as the idle state
+  is indicated with idle state (-2).
+
+  These constants are available in
+
+        #include <dt-bindings/mux/mux.h>
+
+  as MUX_IDLE_AS_IS (-1) and MUX_IDLE_DISCONNECT (-2).
+
+  An example mux controller node look like this (the adg972a chip is a triple
+  4-way multiplexer):
+
+    mux: mux-controller@50 {
+      compatible = "adi,adg792a";
+      reg = <0x50>;
+      #mux-control-cells = <1>;
+
+      idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 2>;
+    };
+
+select:
+  anyOf:
+    - properties:
+        $nodename:
+          pattern: '^mux-controller'
+    - required:
+        - '#mux-control-cells'
+    - required:
+        - '#mux-state-cells'
+
+properties:
+  $nodename:
+    pattern: '^mux-controller(@.*|-[0-9a-f]+)?$'
+
+  '#mux-control-cells':
+    enum: [ 0, 1 ]
+
+  '#mux-state-cells':
+    enum: [ 1, 2 ]
+
+  idle-state:
+    $ref: /schemas/types.yaml#/definitions/int32
+    minimum: -2
+
+  idle-states:
+    description: |
+      Mux controller nodes can specify the state the mux should have when it is
+      idle. If the idle-state is not present, the mux controller is typically
+      left as is when it is idle. For multiplexer chips that expose several mux
+      controllers, the idle-state property is an array with one idle state for
+      each mux controller.
+
+      The special value (-1) may be used to indicate that the mux should be left
+      as is when it is idle. This is the default, but can still be useful for
+      mux controller chips with more than one mux controller, particularly when
+      there is a need to "step past" a mux controller and set some other idle
+      state for a mux controller with a higher index.
+
+      Some mux controllers have the ability to disconnect the input/output of the
+      multiplexer. Using this disconnected high-impedance state as the idle state
+      is indicated with idle state (-2).
+    $ref: /schemas/types.yaml#/definitions/int32-array
+    items:
+      minimum: -2
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* One consumer of a 2-way mux controller (one GPIO-line) */
+    mux: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>;
+    };
+
+    adc-mux {
+        compatible = "io-channel-mux";
+        io-channels = <&adc 0>;
+        io-channel-names = "parent";
+
+        mux-controls = <&mux>;
+        mux-control-names = "adc";
+
+        channels = "sync", "in";
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /*
+     * Two consumers (one for an ADC line and one for an i2c bus) of
+     * parallel 4-way multiplexers controlled by the same two GPIO-lines.
+     */
+    mux2: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+              <&pioA 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    adc-mux {
+        compatible = "io-channel-mux";
+        io-channels = <&adc 0>;
+        io-channel-names = "parent";
+
+        mux-controls = <&mux2>;
+
+        channels = "sync-1", "in", "out", "sync-2";
+    };
+
+    i2c-mux {
+        compatible = "i2c-mux";
+        i2c-parent = <&i2c1>;
+
+        mux-controls = <&mux2>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c@0 {
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ssd1307: oled@3c {
+                reg = <0x3c>;
+            };
+        };
+
+        i2c@3 {
+            reg = <3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pca9555: pca9555@20 {
+                reg = <0x20>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mux1: mux-controller {
+        compatible = "gpio-mux";
+        #mux-state-cells = <1>;
+        mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
+    };
+
+    transceiver4: can-phy4 {
+        compatible = "ti,tcan1042";
+        #phy-cells = <0>;
+        max-bitrate = <5000000>;
+        standby-gpios = <&exp_som 7 GPIO_ACTIVE_HIGH>;
+        mux-states = <&mux1 1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mux/reg-mux.txt b/Documentation/devicetree/bindings/mux/reg-mux.txt
deleted file mode 100644
index 4afd7ba73d60..000000000000
--- a/Documentation/devicetree/bindings/mux/reg-mux.txt
+++ /dev/null
@@ -1,129 +0,0 @@
-Generic register bitfield-based multiplexer controller bindings
-
-Define register bitfields to be used to control multiplexers. The parent
-device tree node must be a device node to provide register r/w access.
-
-Required properties:
-- compatible : should be one of
-	"reg-mux" : if parent device of mux controller is not syscon device
-	"mmio-mux" : if parent device of mux controller is syscon device
-- #mux-control-cells : <1>
-- mux-reg-masks : an array of register offset and pre-shifted bitfield mask
-                  pairs, each describing a single mux control.
-* Standard mux-controller bindings as decribed in mux-controller.txt
-
-Optional properties:
-- idle-states : if present, the state the muxes will have when idle. The
-		special state MUX_IDLE_AS_IS is the default.
-
-The multiplexer state of each multiplexer is defined as the value of the
-bitfield described by the corresponding register offset and bitfield mask
-pair in the mux-reg-masks array.
-
-Example 1:
-The parent device of mux controller is not a syscon device.
-
-&i2c0 {
-	fpga@66 { // fpga connected to i2c
-		compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
-			     "simple-mfd";
-		reg = <0x66>;
-
-		mux: mux-controller {
-			compatible = "reg-mux";
-			#mux-control-cells = <1>;
-			mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
-					<0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
-		};
-	};
-};
-
-mdio-mux-1 {
-	compatible = "mdio-mux-multiplexer";
-	mux-controls = <&mux 0>;
-	mdio-parent-bus = <&emdio1>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	mdio@0 {
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	mdio@8 {
-		reg = <0x8>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	..
-	..
-};
-
-mdio-mux-2 {
-	compatible = "mdio-mux-multiplexer";
-	mux-controls = <&mux 1>;
-	mdio-parent-bus = <&emdio2>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	mdio@0 {
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	mdio@1 {
-		reg = <0x1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	..
-	..
-};
-
-Example 2:
-The parent device of mux controller is syscon device.
-
-syscon {
-	compatible = "syscon";
-
-	mux: mux-controller {
-		compatible = "mmio-mux";
-		#mux-control-cells = <1>;
-
-		mux-reg-masks = <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */
-				<0x3 0x40>, /* 1: reg 0x3, bit 6 */
-		idle-states = <MUX_IDLE_AS_IS>, <0>;
-	};
-};
-
-video-mux {
-	compatible = "video-mux";
-	mux-controls = <&mux 0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	ports {
-		/* inputs 0..3 */
-		port@0 {
-			reg = <0>;
-		};
-		port@1 {
-			reg = <1>;
-		};
-		port@2 {
-			reg = <2>;
-		};
-		port@3 {
-			reg = <3>;
-		};
-
-		/* output */
-		port@4 {
-			reg = <4>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mux/reg-mux.yaml b/Documentation/devicetree/bindings/mux/reg-mux.yaml
new file mode 100644
index 000000000000..dfd9ea582bb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/reg-mux.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/reg-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic register bitfield-based multiplexer controller bindings
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |+
+  Define register bitfields to be used to control multiplexers. The parent
+  device tree node must be a device node to provide register r/w access.
+
+properties:
+  compatible:
+    enum:
+      - reg-mux   # parent device of mux controller is not syscon device
+      - mmio-mux  # parent device of mux controller is syscon device
+
+  reg: true
+
+  '#mux-control-cells':
+    const: 1
+
+  mux-reg-masks:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: register offset
+        - description: pre-shifted bitfield mask
+    description: Each entry pair describes a single mux control.
+
+  idle-states: true
+
+required:
+  - compatible
+  - mux-reg-masks
+  - '#mux-control-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* The parent device of mux controller is not a syscon device. */
+
+    #include <dt-bindings/mux/mux.h>
+
+    mux-controller {
+        compatible = "reg-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks =
+            <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+            <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
+    };
+
+    mdio-mux-1 {
+        compatible = "mdio-mux-multiplexer";
+        mux-controls = <&mux1 0>;
+        mdio-parent-bus = <&emdio1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        mdio@8 {
+            reg = <0x8>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+
+    mdio-mux-2 {
+        compatible = "mdio-mux-multiplexer";
+        mux-controls = <&mux1 1>;
+        mdio-parent-bus = <&emdio2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        mdio@1 {
+            reg = <0x1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+
+  - |
+    /* The parent device of mux controller is syscon device. */
+
+    #include <dt-bindings/mux/mux.h>
+    syscon@1000 {
+        reg = <0x1000 0x100>;
+
+        mux2: mux-controller {
+            compatible = "mmio-mux";
+            #mux-control-cells = <1>;
+
+            mux-reg-masks =
+                <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */
+                <0x3 0x40>; /* 1: reg 0x3, bit 6 */
+            idle-states = <MUX_IDLE_AS_IS>, <0>;
+        };
+    };
+
+    video-mux {
+        compatible = "video-mux";
+        mux-controls = <&mux2 0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* inputs 0..3 */
+            port@0 {
+                reg = <0>;
+            };
+            port@1 {
+                reg = <1>;
+            };
+            port@2 {
+                reg = <2>;
+            };
+            port@3 {
+                reg = <3>;
+            };
+
+            /* output */
+            port@4 {
+                reg = <4>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/nds32/andestech-boards b/Documentation/devicetree/bindings/nds32/andestech-boards
deleted file mode 100644
index f5d75693e3c7..000000000000
--- a/Documentation/devicetree/bindings/nds32/andestech-boards
+++ /dev/null
@@ -1,40 +0,0 @@
-Andestech(nds32) AE3XX Platform
------------------------------------------------------------------------------
-The AE3XX prototype demonstrates the AE3XX example platform on the FPGA. It
-is composed of one Andestech(nds32) processor and AE3XX.
-
-Required properties (in root node):
-- compatible = "andestech,ae3xx";
-
-Example:
-/dts-v1/;
-/ {
-	compatible = "andestech,ae3xx";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-};
-
-Andestech(nds32) AG101P Platform
------------------------------------------------------------------------------
-AG101P is a generic SoC Platform IP that works with any of Andestech(nds32)
-processors to provide a cost-effective and high performance solution for
-majority of embedded systems in variety of application domains. Users may
-simply attach their IP on one of the system buses together with certain glue
-logics to complete a SoC solution for a specific application. With
-comprehensive simulation and design environments, users may evaluate the
-system performance of their applications and track bugs of their designs
-efficiently. The optional hardware development platform further provides real
-system environment for early prototyping and software/hardware co-development.
-
-Required properties (in root node):
-	compatible = "andestech,ag101p";
-
-Example:
-/dts-v1/;
-/ {
-	compatible = "andestech,ag101p";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-};
diff --git a/Documentation/devicetree/bindings/nds32/atl2c.txt b/Documentation/devicetree/bindings/nds32/atl2c.txt
deleted file mode 100644
index da8ab8e7ae9b..000000000000
--- a/Documentation/devicetree/bindings/nds32/atl2c.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Andestech L2 cache Controller
-
-The level-2 cache controller plays an important role in reducing memory latency
-for high performance systems, such as thoese designs with AndesCore processors.
-Level-2 cache controller in general enhances overall system performance
-signigicantly and the system power consumption might be reduced as well by
-reducing DRAM accesses.
-
-This binding specifies what properties must be available in the device tree
-representation of an Andestech L2 cache controller.
-
-Required properties:
-	- compatible:
-		Usage: required
-		Value type: <string>
-		Definition: "andestech,atl2c"
-	- reg : Physical base address and size of cache controller's memory mapped
-	- cache-unified : Specifies the cache is a unified cache.
-	- cache-level : Should be set to 2 for a level 2 cache.
-
-* Example
-
-	cache-controller@e0500000 {
-		compatible = "andestech,atl2c";
-		reg = <0xe0500000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/nds32/cpus.txt b/Documentation/devicetree/bindings/nds32/cpus.txt
deleted file mode 100644
index 6f9e311b6589..000000000000
--- a/Documentation/devicetree/bindings/nds32/cpus.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Andestech Processor Binding
-
-This binding specifies what properties must be available in the device tree
-representation of a Andestech Processor Core, which is the root node in the
-tree.
-
-Required properties:
-
-	- compatible:
-		Usage: required
-		Value type: <string>
-		Definition: Should be "andestech,<core_name>", "andestech,nds32v3" as fallback.
-		Must contain "andestech,nds32v3" as the most generic value, in addition to
-		one of the following identifiers for a particular CPU core:
-		"andestech,n13"
-		"andestech,n15"
-		"andestech,d15"
-		"andestech,n10"
-		"andestech,d10"
-	- device_type
-		Usage: required
-		Value type: <string>
-		Definition: must be "cpu"
-	- reg: Contains CPU index.
-	- clock-frequency: Contains the clock frequency for CPU, in Hz.
-
-* Examples
-
-/ {
-	cpus {
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "andestech,n13", "andestech,nds32v3";
-			reg = <0x0>;
-			clock-frequency = <60000000>
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/actions,owl-emac.yaml b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml
new file mode 100644
index 000000000000..d30fada2ac39
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/actions,owl-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs Ethernet MAC Controller
+
+maintainers:
+  - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+  This Ethernet MAC is used on the Owl family of SoCs from Actions Semi.
+  It provides the RMII and SMII interfaces and is compliant with the
+  IEEE 802.3 CSMA/CD standard, supporting both half-duplex and full-duplex
+  operation modes at 10/100 Mb/s data transfer rates.
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: actions,owl-emac
+      - items:
+          - enum:
+              - actions,s500-emac
+          - const: actions,owl-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    additionalItems: false
+    items:
+      - const: eth
+      - const: rmii
+
+  resets:
+    maxItems: 1
+
+  actions,ethcfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the device containing custom config.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - phy-mode
+  - phy-handle
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/actions,s500-cmu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/actions,s500-reset.h>
+
+    ethernet@b0310000 {
+        compatible = "actions,s500-emac", "actions,owl-emac";
+        reg = <0xb0310000 0x10000>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cmu 59 /*CLK_ETHERNET*/>, <&cmu CLK_RMII_REF>;
+        clock-names = "eth", "rmii";
+        resets = <&cmu RESET_ETHERNET>;
+        phy-mode = "rmii";
+        phy-handle = <&eth_phy>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eth_phy: ethernet-phy@3 {
+                reg = <0x3>;
+                interrupt-parent = <&sirq>;
+                interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
index d95cc691a65f..929cf8c0b0fd 100644
--- a/Documentation/devicetree/bindings/net/adi,adin.yaml
+++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices ADIN1200/ADIN1300 PHY
 
 maintainers:
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+  - Alexandru Tachici <alexandru.tachici@analog.com>
 
 description: |
   Bindings for Analog Devices Industrial Ethernet PHYs
@@ -36,6 +36,24 @@ properties:
     enum: [ 4, 8, 12, 16, 20, 24 ]
     default: 8
 
+  adi,phy-output-clock:
+    description: |
+      Select clock output on GP_CLK pin. Two clocks are available:
+      A 25MHz reference and a free-running 125MHz.
+      The phy can alternatively automatically switch between the reference and
+      the 125MHz clocks based on its internal state.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - 25mhz-reference
+      - 125mhz-free-running
+      - adaptive-free-running
+
+  adi,phy-output-reference-clock:
+    description: Enable 25MHz reference clock output on CLK25_REF pin.
+    type: boolean
+
+unevaluatedProperties: false
+
 examples:
   - |
     ethernet {
diff --git a/Documentation/devicetree/bindings/net/adi,adin1110.yaml b/Documentation/devicetree/bindings/net/adi,adin1110.yaml
new file mode 100644
index 000000000000..b6bd8ee38a18
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/adi,adin1110.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin1110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADI ADIN1110 MAC-PHY
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  The ADIN1110 is a low power single port 10BASE-T1L MAC-
+  PHY designed for industrial Ethernet applications. It integrates
+  an Ethernet PHY core with a MAC and all the associated analog
+  circuitry, input and output clock buffering.
+
+  The ADIN2111 is a low power, low complexity, two-Ethernet ports
+  switch with integrated 10BASE-T1L PHYs and one serial peripheral
+  interface (SPI) port. The device is designed for industrial Ethernet
+  applications using low power constrained nodes and is compliant
+  with the IEEE 802.3cg-2019 Ethernet standard for long reach
+  10 Mbps single pair Ethernet (SPE).
+
+  The device has a 4-wire SPI interface for communication
+  between the MAC and host processor.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adin1110
+      - adi,adin2111
+
+  reg:
+    maxItems: 1
+
+  adi,spi-crc:
+    description: |
+      Enable CRC8 checks on SPI read/writes.
+    type: boolean
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "adi,adin2111";
+            reg = <0>;
+            spi-max-frequency = <24500000>;
+
+            adi,spi-crc;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+
+            local-mac-address = [ 00 11 22 33 44 55 ];
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
index 8d8560a67abf..987b91b9afe9 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-emac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 EMAC Ethernet Controller Device Tree Bindings
+title: Allwinner A10 EMAC Ethernet Controller
 
 allOf:
   - $ref: "ethernet-controller.yaml#"
@@ -29,6 +29,10 @@ properties:
   allwinner,sram:
     description: Phandle to the device SRAM
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
index 767193ec1d32..ede977cdfb8d 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-mdio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 MDIO Controller Device Tree Bindings
+title: Allwinner A10 MDIO Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
index 703d0d886884..3bd912ed7c7e 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/allwinner,sun7i-a20-gmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 GMAC Device Tree Bindings
+title: Allwinner A20 GMAC
 
 allOf:
   - $ref: "snps,dwmac.yaml#"
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index db36b4d86484..1432fda3b603 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-emac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t EMAC Device Tree Bindings
+title: Allwinner A83t EMAC
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -15,12 +15,15 @@ properties:
     oneOf:
       - const: allwinner,sun8i-a83t-emac
       - const: allwinner,sun8i-h3-emac
-      - const: allwinner,sun8i-r40-emac
+      - const: allwinner,sun8i-r40-gmac
       - const: allwinner,sun8i-v3s-emac
       - const: allwinner,sun50i-a64-emac
       - items:
-        - const: allwinner,sun50i-h6-emac
-        - const: allwinner,sun50i-a64-emac
+          - enum:
+              - allwinner,sun20i-d1-emac
+              - allwinner,sun50i-h6-emac
+              - allwinner,sun50i-h616-emac0
+          - const: allwinner,sun50i-a64-emac
 
   reg:
     maxItems: 1
@@ -38,7 +41,7 @@ properties:
     const: stmmaceth
 
   syscon:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Phandle to the device containing the EMAC or GMAC clock
       register
@@ -91,7 +94,7 @@ allOf:
         compatible:
           contains:
             enum:
-              - allwinner,sun8i-r40-emac
+              - allwinner,sun8i-r40-gmac
 
     then:
       properties:
@@ -114,33 +117,35 @@ allOf:
     then:
       properties:
         allwinner,leds-active-low:
-          $ref: /schemas/types.yaml#definitions/flag
+          $ref: /schemas/types.yaml#/definitions/flag
           description:
             EPHY LEDs are active low.
 
         mdio-mux:
           type: object
+          unevaluatedProperties: false
 
           properties:
             compatible:
               const: allwinner,sun8i-h3-mdio-mux
 
             mdio-parent-bus:
-              $ref: /schemas/types.yaml#definitions/phandle
+              $ref: /schemas/types.yaml#/definitions/phandle
               description:
                 Phandle to EMAC MDIO.
 
+            "#address-cells":
+              const: 1
+
+            "#size-cells":
+              const: 0
+
             mdio@1:
-              type: object
+              $ref: mdio.yaml#
+              unevaluatedProperties: false
               description: Internal MDIO Bus
 
               properties:
-                "#address-cells":
-                  const: 1
-
-                "#size-cells":
-                  const: 0
-
                 compatible:
                   const: allwinner,sun8i-h3-mdio-internal
 
@@ -166,16 +171,11 @@ allOf:
 
 
             mdio@2:
-              type: object
+              $ref: mdio.yaml#
+              unevaluatedProperties: false
               description: External MDIO Bus (H3 only)
 
               properties:
-                "#address-cells":
-                  const: 1
-
-                "#size-cells":
-                  const: 0
-
                 reg:
                   const: 2
 
diff --git a/Documentation/devicetree/bindings/net/altera_tse.txt b/Documentation/devicetree/bindings/net/altera_tse.txt
deleted file mode 100644
index 0b7d4d3758ea..000000000000
--- a/Documentation/devicetree/bindings/net/altera_tse.txt
+++ /dev/null
@@ -1,113 +0,0 @@
-* Altera Triple-Speed Ethernet MAC driver (TSE)
-
-Required properties:
-- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should
-		be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE.
-		ALTR is supported for legacy device trees, but is deprecated.
-		altr should be used for all new designs.
-- reg: Address and length of the register set for the device. It contains
-  the information of registers in the same order as described by reg-names
-- reg-names: Should contain the reg names
-  "control_port": MAC configuration space region
-  "tx_csr":       xDMA Tx dispatcher control and status space region
-  "tx_desc":      MSGDMA Tx dispatcher descriptor space region
-  "rx_csr" :      xDMA Rx dispatcher control and status space region
-  "rx_desc":      MSGDMA Rx dispatcher descriptor space region
-  "rx_resp":      MSGDMA Rx dispatcher response space region
-  "s1":		  SGDMA descriptor memory
-- interrupts: Should contain the TSE interrupts and it's mode.
-- interrupt-names: Should contain the interrupt names
-  "rx_irq":       xDMA Rx dispatcher interrupt
-  "tx_irq":       xDMA Tx dispatcher interrupt
-- rx-fifo-depth: MAC receive FIFO buffer depth in bytes
-- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes
-- phy-mode: See ethernet.txt in the same directory.
-- phy-handle: See ethernet.txt in the same directory.
-- phy-addr: See ethernet.txt in the same directory. A configuration should
-		include phy-handle or phy-addr.
-- altr,has-supplementary-unicast:
-		If present, TSE supports additional unicast addresses.
-		Otherwise additional unicast addresses are not supported.
-- altr,has-hash-multicast-filter:
-		If present, TSE supports a hash based multicast filter.
-		Otherwise, hash-based multicast filtering is not supported.
-
-- mdio device tree subnode: When the TSE has a phy connected to its local
-		mdio, there must be device tree subnode with the following
-		required properties:
-
-	- compatible: Must be "altr,tse-mdio".
-	- #address-cells: Must be <1>.
-	- #size-cells: Must be <0>.
-
-	For each phy on the mdio bus, there must be a node with the following
-	fields:
-
-	- reg: phy id used to communicate to phy.
-	- device_type: Must be "ethernet-phy".
-
-The MAC address will be determined using the optional properties defined in
-ethernet.txt.
-
-Example:
-
-	tse_sub_0_eth_tse_0: ethernet@1,00000000 {
-		compatible = "altr,tse-msgdma-1.0";
-		reg =	<0x00000001 0x00000000 0x00000400>,
-			<0x00000001 0x00000460 0x00000020>,
-			<0x00000001 0x00000480 0x00000020>,
-			<0x00000001 0x000004A0 0x00000008>,
-			<0x00000001 0x00000400 0x00000020>,
-			<0x00000001 0x00000420 0x00000020>;
-		reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
-		interrupt-parent = <&hps_0_arm_gic_0>;
-		interrupts = <0 41 4>, <0 40 4>;
-		interrupt-names = "rx_irq", "tx_irq";
-		rx-fifo-depth = <2048>;
-		tx-fifo-depth = <2048>;
-		address-bits = <48>;
-		max-frame-size = <1500>;
-		local-mac-address = [ 00 00 00 00 00 00 ];
-		phy-mode = "gmii";
-		altr,has-supplementary-unicast;
-		altr,has-hash-multicast-filter;
-		phy-handle = <&phy0>;
-		mdio {
-			compatible = "altr,tse-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy0: ethernet-phy@0 {
-				reg = <0x0>;
-				device_type = "ethernet-phy";
-			};
-
-			phy1: ethernet-phy@1 {
-				reg = <0x1>;
-				device_type = "ethernet-phy";
-			};
-
-		};
-	};
-
-	tse_sub_1_eth_tse_0: ethernet@1,00001000 {
-		compatible = "altr,tse-msgdma-1.0";
-		reg = 	<0x00000001 0x00001000 0x00000400>,
-			<0x00000001 0x00001460 0x00000020>,
-			<0x00000001 0x00001480 0x00000020>,
-			<0x00000001 0x000014A0 0x00000008>,
-			<0x00000001 0x00001400 0x00000020>,
-			<0x00000001 0x00001420 0x00000020>;
-		reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
-		interrupt-parent = <&hps_0_arm_gic_0>;
-		interrupts = <0 43 4>, <0 42 4>;
-		interrupt-names = "rx_irq", "tx_irq";
-		rx-fifo-depth = <2048>;
-		tx-fifo-depth = <2048>;
-		address-bits = <48>;
-		max-frame-size = <1500>;
-		local-mac-address = [ 00 00 00 00 00 00 ];
-		phy-mode = "gmii";
-		altr,has-supplementary-unicast;
-		altr,has-hash-multicast-filter;
-		phy-handle = <&phy1>;
-	};
diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml
new file mode 100644
index 000000000000..8d1d94494349
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/altr,tse.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/altr,tse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera Triple Speed Ethernet MAC driver (TSE)
+
+maintainers:
+  - Maxime Chevallier <maxime.chevallier@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: altr,tse-1.0
+      - const: ALTR,tse-1.0
+        deprecated: true
+      - const: altr,tse-msgdma-1.0
+
+  interrupts:
+    minItems: 2
+
+  interrupt-names:
+    items:
+      - const: rx_irq
+      - const: tx_irq
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Depth in bytes of the RX FIFO
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Depth in bytes of the TX FIFO
+
+  altr,has-supplementary-unicast:
+    type: boolean
+    description:
+      If present, TSE supports additional unicast addresses.
+
+  altr,has-hash-multicast-filter:
+    type: boolean
+    description:
+      If present, TSE supports hash based multicast filter.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Creates and registers an MDIO bus.
+
+    properties:
+      compatible:
+        const: altr,tse-mdio
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - rx-fifo-depth
+  - tx-fifo-depth
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - const: altr,tse-1.0
+              - const: ALTR,tse-1.0
+    then:
+      properties:
+        reg:
+          minItems: 4
+        reg-names:
+          items:
+            - const: control_port
+            - const: rx_csr
+            - const: tx_csr
+            - const: s1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - altr,tse-msgdma-1.0
+    then:
+      properties:
+        reg:
+          minItems: 6
+          maxItems: 7
+        reg-names:
+          minItems: 6
+          items:
+            - const: control_port
+            - const: rx_csr
+            - const: rx_desc
+            - const: rx_resp
+            - const: tx_csr
+            - const: tx_desc
+            - const: pcs
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    tse_sub_0: ethernet@c0100000 {
+        compatible = "altr,tse-msgdma-1.0";
+        reg = <0xc0100000 0x00000400>,
+              <0xc0101000 0x00000020>,
+              <0xc0102000 0x00000020>,
+              <0xc0103000 0x00000008>,
+              <0xc0104000 0x00000020>,
+              <0xc0105000 0x00000020>,
+              <0xc0106000 0x00000100>;
+        reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc", "pcs";
+        interrupt-parent = <&intc>;
+        interrupts = <0 44 4>,<0 45 4>;
+        interrupt-names = "rx_irq","tx_irq";
+        rx-fifo-depth = <2048>;
+        tx-fifo-depth = <2048>;
+        max-frame-size = <1500>;
+        local-mac-address = [ 00 00 00 00 00 00 ];
+        altr,has-supplementary-unicast;
+        altr,has-hash-multicast-filter;
+        sfp = <&sfp0>;
+        phy-mode = "sgmii";
+        managed = "in-band-status";
+    };
+  - |
+    tse_sub_1_eth_tse_0: ethernet@1,00001000 {
+        compatible = "altr,tse-msgdma-1.0";
+        reg = <0x00001000 0x00000400>,
+              <0x00001460 0x00000020>,
+              <0x00001480 0x00000020>,
+              <0x000014A0 0x00000008>,
+              <0x00001400 0x00000020>,
+              <0x00001420 0x00000020>;
+        reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
+        interrupt-parent = <&hps_0_arm_gic_0>;
+        interrupts = <0 43 4>, <0 42 4>;
+        interrupt-names = "rx_irq", "tx_irq";
+        rx-fifo-depth = <2048>;
+        tx-fifo-depth = <2048>;
+        max-frame-size = <1500>;
+        local-mac-address = [ 00 00 00 00 00 00 ];
+        phy-mode = "gmii";
+        altr,has-supplementary-unicast;
+        altr,has-hash-multicast-filter;
+        phy-handle = <&phy1>;
+        mdio {
+            compatible = "altr,tse-mdio";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy1: ethernet-phy@1 {
+                reg = <0x1>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index ae91aa9d8616..ddd5a073c3a8 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson DWMAC Ethernet controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
 
 # We need a select here so we don't match all nodes with 'snps,dwmac'
@@ -22,6 +22,7 @@ select:
           - amlogic,meson8m2-dwmac
           - amlogic,meson-gxbb-dwmac
           - amlogic,meson-axg-dwmac
+          - amlogic,meson-g12a-dwmac
   required:
     - compatible
 
@@ -36,25 +37,28 @@ allOf:
               - amlogic,meson8m2-dwmac
               - amlogic,meson-gxbb-dwmac
               - amlogic,meson-axg-dwmac
+              - amlogic,meson-g12a-dwmac
 
     then:
       properties:
         clocks:
+          minItems: 3
           items:
             - description: GMAC main clock
             - description: First parent clock of the internal mux
             - description: Second parent clock of the internal mux
+            - description: The clock which drives the timing adjustment logic
 
         clock-names:
           minItems: 3
-          maxItems: 3
           items:
             - const: stmmaceth
             - const: clkin0
             - const: clkin1
+            - const: timing-adjustment
 
         amlogic,tx-delay-ns:
-          $ref: /schemas/types.yaml#definitions/uint32
+          $ref: /schemas/types.yaml#/definitions/uint32
           description:
             The internal RGMII TX clock delay (provided by this driver) in
             nanoseconds. Allowed values are 0ns, 2ns, 4ns, 6ns.
@@ -67,6 +71,62 @@ allOf:
             PHY and MAC are adding a delay).
             Any configuration is ignored when the phy-mode is set to "rmii".
 
+        amlogic,rx-delay-ns:
+          deprecated: true
+          enum:
+            - 0
+            - 2
+          default: 0
+          description:
+            The internal RGMII RX clock delay in nanoseconds. Deprecated, use
+            rx-internal-delay-ps instead.
+
+        rx-internal-delay-ps:
+          default: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8b-dwmac
+              - amlogic,meson8m2-dwmac
+              - amlogic,meson-gxbb-dwmac
+              - amlogic,meson-axg-dwmac
+    then:
+      properties:
+        rx-internal-delay-ps:
+          enum:
+            - 0
+            - 2000
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson-g12a-dwmac
+    then:
+      properties:
+        rx-internal-delay-ps:
+          enum:
+            - 0
+            - 200
+            - 400
+            - 600
+            - 800
+            - 1000
+            - 1200
+            - 1400
+            - 1600
+            - 1800
+            - 2000
+            - 2200
+            - 2400
+            - 2600
+            - 2800
+            - 3000
+
 properties:
   compatible:
     additionalItems: true
@@ -78,6 +138,7 @@ properties:
           - amlogic,meson8m2-dwmac
           - amlogic,meson-gxbb-dwmac
           - amlogic,meson-axg-dwmac
+          - amlogic,meson-g12a-dwmac
     contains:
       enum:
         - snps,dwmac-3.70a
@@ -100,6 +161,8 @@ required:
   - clock-names
   - phy-mode
 
+unevaluatedProperties: false
+
 examples:
   - |
     ethmac: ethernet@c9410000 {
@@ -107,7 +170,7 @@ examples:
          reg = <0xc9410000 0x10000>, <0xc8834540 0x8>;
          interrupts = <8>;
          interrupt-names = "macirq";
-         clocks = <&clk_eth>, <&clkc_fclk_div2>, <&clk_mpll2>;
-         clock-names = "stmmaceth", "clkin0", "clkin1";
+         clocks = <&clk_eth>, <&clk_fclk_div2>, <&clk_mpll2>, <&clk_fclk_div2>;
+         clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
          phy-mode = "rgmii";
     };
diff --git a/Documentation/devicetree/bindings/net/asix,ax88178.yaml b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
new file mode 100644
index 000000000000..1af52358de4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/asix,ax88178.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The device tree bindings for the USB Ethernet controllers
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  Device tree properties for hard wired USB Ethernet devices.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - usbb95,1720   # ASIX AX88172
+          - usbb95,172a   # ASIX AX88172A
+          - usbb95,1780   # ASIX AX88178
+          - usbb95,7720   # ASIX AX88772
+          - usbb95,772a   # ASIX AX88772A
+          - usbb95,772b   # ASIX AX88772B
+          - usbb95,7e2b   # ASIX AX88772B
+
+  reg: true
+  local-mac-address: true
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+            compatible = "usbb95,7e2b";
+            reg = <1>;
+            local-mac-address = [00 00 00 00 00 00];
+        };
+    };
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb1@1 {
+            compatible = "usb1234,5678";
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet@1 {
+               compatible = "usbb95,772b";
+               reg = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml
new file mode 100644
index 000000000000..699ebf452479
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/asix,ax88796c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASIX AX88796C SPI Ethernet Adapter
+
+maintainers:
+  - Łukasz Stelmach <l.stelmach@samsung.com>
+
+description: |
+  ASIX AX88796C is an Ethernet controller with a built in PHY. This
+  describes SPI mode of the chip.
+
+  The node for this driver must be a child node of an SPI controller,
+  hence all mandatory properties described in
+  ../spi/spi-controller.yaml must be specified.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: asix,ax88796c
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 40000000
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      A GPIO line handling reset of the chip. As the line is active low,
+      it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  local-mac-address: true
+
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - interrupts
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  # Artik5 eval board
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "asix,ax88796c";
+            reg = <0x0>;
+            local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
+            interrupt-parent = <&gpx2>;
+            interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+            spi-max-frequency = <40000000>;
+            reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
index 71808e78a495..f81eda8cb0a5 100644
--- a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
@@ -20,23 +20,31 @@ allOf:
 properties:
   compatible:
     const: aspeed,ast2600-mdio
+
   reg:
     maxItems: 1
     description: The register range of the MDIO controller instance
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
   - "#address-cells"
   - "#size-cells"
 
+unevaluatedProperties: false
+
 examples:
   - |
+    #include <dt-bindings/clock/ast2600-clock.h>
     mdio0: mdio@1e650000 {
             compatible = "aspeed,ast2600-mdio";
             reg = <0x1e650000 0x8>;
             #address-cells = <1>;
             #size-cells = <0>;
+            resets = <&syscon ASPEED_RESET_MII>;
 
             ethphy0: ethernet-phy@0 {
                     compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt
deleted file mode 100644
index 0120ebe93262..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,amac.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Broadcom AMAC Ethernet Controller Device Tree Bindings
--------------------------------------------------------------
-
-Required properties:
- - compatible:	"brcm,amac"
-		"brcm,nsp-amac"
-		"brcm,ns2-amac"
- - reg:		Address and length of the register set for the device. It
-		contains the information of registers in the same order as
-		described by reg-names
- - reg-names:	Names of the registers.
-		"amac_base":	Address and length of the GMAC registers
-		"idm_base":	Address and length of the GMAC IDM registers
-				(required for NSP and Northstar2)
-		"nicpm_base":	Address and length of the NIC Port Manager
-				registers (required for Northstar2)
- - interrupts:	Interrupt number
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Examples:
-
-amac0: ethernet@18022000 {
-	compatible = "brcm,nsp-amac";
-	reg = <0x18022000 0x1000>,
-	      <0x18110000 0x1000>;
-	reg-names = "amac_base", "idm_base";
-	interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.yaml b/Documentation/devicetree/bindings/net/brcm,amac.yaml
new file mode 100644
index 000000000000..ee2eac8f5710
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,amac.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,amac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom AMAC Ethernet Controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,amac
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,nsp-amac
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,ns2-amac
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+
+properties:
+  compatible:
+    enum:
+      - brcm,amac
+      - brcm,nsp-amac
+      - brcm,ns2-amac
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: amac_base
+      - const: idm_base
+      - const: nicpm_base
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+   amac0: ethernet@18022000 {
+      compatible = "brcm,nsp-amac";
+      reg = <0x18022000 0x1000>,
+            <0x18110000 0x1000>;
+      reg-names = "amac_base", "idm_base";
+      interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+   };
diff --git a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
new file mode 100644
index 000000000000..a93d2f165899
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,bcm4908-enet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4908 Ethernet controller
+
+description: Broadcom's Ethernet controller integrated into BCM4908 family SoCs
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm4908-enet
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: RX interrupt
+      - description: TX interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - reg
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@80002000 {
+        compatible = "brcm,bcm4908-enet";
+        reg = <0x80002000 0x1000>;
+
+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml
new file mode 100644
index 000000000000..9ef28c2a0afc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,bcm6368-mdio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6368 MDIO bus multiplexer
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+description:
+  This MDIO bus multiplexer defines buses that could be internal as well as
+  external to SoCs. When child bus is selected, one needs to select these two
+  properties as well to generate desired MDIO transaction on appropriate bus.
+
+allOf:
+  - $ref: mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm6368-mdio-mux
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio0: mdio@10e000b0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "brcm,bcm6368-mdio-mux";
+      reg = <0x10e000b0 0x6>;
+
+      mdio_int: mdio@0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0>;
+      };
+
+      mdio_ext: mdio@1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
index 88b57b0ca1f4..d0935d2afef8 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
@@ -1,101 +1,13 @@
 * Broadcom Starfighter 2 integrated swich
 
-Required properties:
+See dsa/brcm,bcm7445-switch-v4.0.yaml for the documentation.
 
-- compatible: should be one of
-	"brcm,bcm7445-switch-v4.0"
-	"brcm,bcm7278-switch-v4.0"
-	"brcm,bcm7278-switch-v4.8"
-- reg: addresses and length of the register sets for the device, must be 6
-  pairs of register addresses and lengths
-- interrupts: interrupts for the devices, must be two interrupts
-- #address-cells: must be 1, see dsa/dsa.txt
-- #size-cells: must be 0, see dsa/dsa.txt
-
-Deprecated binding required properties:
+*Deprecated* binding required properties:
 
 - dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
 - dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
 - #address-cells: must be 2, see dsa/dsa.txt
 
-Subnodes:
-
-The integrated switch subnode should be specified according to the binding
-described in dsa/dsa.txt.
-
-Optional properties:
-
-- reg-names: litteral names for the device base register addresses, when present
-  must be: "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb"
-
-- interrupt-names: litternal names for the device interrupt lines, when present
-  must be: "switch_0" and "switch_1"
-
-- brcm,num-gphy: specify the maximum number of integrated gigabit PHYs in the
-  switch
-
-- brcm,num-rgmii-ports: specify the maximum number of RGMII interfaces supported
-  by the switch
-
-- brcm,fcb-pause-override: boolean property, if present indicates that the switch
-  supports Failover Control Block pause override capability
-
-- brcm,acb-packets-inflight: boolean property, if present indicates that the switch
-  Admission Control Block supports reporting the number of packets in-flight in a
-  switch queue
-
-- resets: a single phandle and reset identifier pair. See
-  Documentation/devicetree/bindings/reset/reset.txt for details.
-
-- reset-names: If the "reset" property is specified, this property should have
-  the value "switch" to denote the switch reset line.
-
-Port subnodes:
-
-Optional properties:
-
-- brcm,use-bcm-hdr: boolean property, if present, indicates that the switch
-  port has Broadcom tags enabled (per-packet metadata)
-
-Example:
-
-switch_top@f0b00000 {
-	compatible = "simple-bus";
-	#size-cells = <1>;
-	#address-cells = <1>;
-	ranges = <0 0xf0b00000 0x40804>;
-
-	ethernet_switch@0 {
-		compatible = "brcm,bcm7445-switch-v4.0";
-		#size-cells = <0>;
-		#address-cells = <1>;
-		reg = <0x0 0x40000
-			0x40000 0x110
-			0x40340 0x30
-			0x40380 0x30
-			0x40400 0x34
-			0x40600 0x208>;
-		reg-names = "core", "reg", intrl2_0", "intrl2_1",
-			    "fcb, "acb";
-		interrupts = <0 0x18 0
-				0 0x19 0>;
-		brcm,num-gphy = <1>;
-		brcm,num-rgmii-ports = <2>;
-		brcm,fcb-pause-override;
-		brcm,acb-packets-inflight;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				label = "gphy";
-				reg = <0>;
-			};
-		};
-	};
-};
-
 Example using the old DSA DeviceTree binding:
 
 switch_top@f0b00000 {
@@ -125,7 +37,7 @@ switch_top@f0b00000 {
 		switch@0 {
 			reg = <0 0>;
 			#size-cells = <0>;
-			#address-cells <1>;
+			#address-cells = <1>;
 
 			port@0 {
 				label = "gphy";
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
deleted file mode 100644
index 33a0d67e4ce5..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-* Broadcom BCM7xxx Ethernet Controller (GENET)
-
-Required properties:
-- compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2",
-  "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5".
-- reg: address and length of the register set for the device
-- interrupts and/or interrupts-extended: must be two cells, the first cell
-  is the general purpose interrupt line, while the second cell is the
-  interrupt for the ring RX and TX queues operating in ring mode.  An
-  optional third interrupt cell for Wake-on-LAN can be specified.
-  See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-  for information on the property specifics.
-- phy-mode: see ethernet.txt file in the same directory
-- #address-cells: should be 1
-- #size-cells: should be 1
-
-Optional properties:
-- clocks: When provided, must be two phandles to the functional clocks nodes
-  of the GENET block. The first phandle is the main GENET clock used during
-  normal operation, while the second phandle is the Wake-on-LAN clock.
-- clock-names: When provided, names of the functional clock phandles, first
-  name should be "enet" and second should be "enet-wol".
-
-- phy-handle: See ethernet.txt file in the same directory; used to describe
-  configurations where a PHY (internal or external) is used.
-
-- fixed-link: When the GENET interface is connected to a MoCA hardware block or
-  when operating in a RGMII to RGMII type of connection, or when the MDIO bus is
-  voluntarily disabled, this property should be used to describe the "fixed link".
-  See Documentation/devicetree/bindings/net/fixed-link.txt for information on
-  the property specifics
-
-Required child nodes:
-
-- mdio bus node: this node should always be present regardless of the PHY
-  configuration of the GENET instance
-
-MDIO bus node required properties:
-
-- compatible: should contain one of "brcm,genet-mdio-v1", "brcm,genet-mdio-v2"
-  "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5", the version
-  has to match the parent node compatible property (e.g: brcm,genet-v4 pairs
-  with brcm,genet-mdio-v4)
-- reg: address and length relative to the parent node base register address
-- #address-cells: address cell for MDIO bus addressing, should be 1
-- #size-cells: size of the cells for MDIO bus addressing, should be 0
-
-Ethernet PHY node properties:
-
-See Documentation/devicetree/bindings/net/phy.txt for the list of required and
-optional properties.
-
-Internal Gigabit PHY example:
-
-ethernet@f0b60000 {
-	phy-mode = "internal";
-	phy-handle = <&phy1>;
-	mac-address = [ 00 10 18 36 23 1a ];
-	compatible = "brcm,genet-v4";
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	reg = <0xf0b60000 0xfc4c>;
-	interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>;
-
-	mdio@e14 {
-		compatible = "brcm,genet-mdio-v4";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		reg = <0xe14 0x8>;
-
-		phy1: ethernet-phy@1 {
-			max-speed = <1000>;
-			reg = <0x1>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
-
-MoCA interface / MAC to MAC example:
-
-ethernet@f0b80000 {
-	phy-mode = "moca";
-	fixed-link = <1 0 1000 0 0>;
-	mac-address = [ 00 10 18 36 24 1a ];
-	compatible = "brcm,genet-v4";
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	reg = <0xf0b80000 0xfc4c>;
-	interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
-
-	mdio@e14 {
-		compatible = "brcm,genet-mdio-v4";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		reg = <0xe14 0x8>;
-	};
-};
-
-
-External MDIO-connected Gigabit PHY/switch:
-
-ethernet@f0ba0000 {
-	phy-mode = "rgmii";
-	phy-handle = <&phy0>;
-	mac-address = [ 00 10 18 36 26 1a ];
-	compatible = "brcm,genet-v4";
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	reg = <0xf0ba0000 0xfc4c>;
-	interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
-
-	mdio@e14 {
-		compatible = "brcm,genet-mdio-v4";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		reg = <0xe14 0x8>;
-
-		phy0: ethernet-phy@0 {
-			max-speed = <1000>;
-			reg = <0x0>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
new file mode 100644
index 000000000000..e5af53508e25
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,bcmgenet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Controller (GENET) binding
+
+maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,genet-v1
+      - brcm,genet-v2
+      - brcm,genet-v3
+      - brcm,genet-v4
+      - brcm,genet-v5
+      - brcm,bcm2711-genet-v5
+      - brcm,bcm7712-genet-v5
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: general purpose interrupt line
+      - description: RX and TX rings interrupt line
+      - description: Wake-on-LAN interrupt line
+
+
+  clocks:
+    minItems: 1
+    items:
+      - description: main clock
+      - description: EEE clock
+      - description: Wake-on-LAN clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: enet
+      - const: enet-eee
+      - const: enet-wol
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "^mdio@[0-9a-f]+$":
+    type: object
+    $ref: "brcm,unimac-mdio.yaml"
+
+    description:
+      GENET internal UniMAC MDIO bus
+
+required:
+  - reg
+  - interrupts
+  - phy-mode
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - $ref: ethernet-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+  #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+  - |
+    ethernet@f0b60000 {
+        phy-mode = "internal";
+        phy-handle = <&phy1>;
+        mac-address = [ 00 10 18 36 23 1a ];
+        compatible = "brcm,genet-v4";
+        reg = <0xf0b60000 0xfc4c>;
+        interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        mdio0: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+
+           phy1: ethernet-phy@1 {
+                max-speed = <1000>;
+                reg = <1>;
+                compatible = "ethernet-phy-ieee802.3-c22";
+           };
+        };
+    };
+
+  - |
+    ethernet@f0b80000 {
+        phy-mode = "moca";
+        fixed-link = <1 0 1000 0 0>;
+        mac-address = [ 00 10 18 36 24 1a ];
+        compatible = "brcm,genet-v4";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0xf0b80000 0xfc4c>;
+        interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
+
+        mdio1: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+        };
+    };
+
+  - |
+    ethernet@f0ba0000 {
+        phy-mode = "rgmii";
+        phy-handle = <&phy0>;
+        mac-address = [ 00 10 18 36 26 1a ];
+        compatible = "brcm,genet-v4";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0xf0ba0000 0xfc4c>;
+        interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
+
+        mdio2: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+
+           phy0: ethernet-phy@0 {
+                max-speed = <1000>;
+                reg = <0>;
+                compatible = "ethernet-phy-ieee802.3-c22";
+           };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
deleted file mode 100644
index 8ba9ed11d716..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Broadcom iProc MDIO bus controller
-
-Required properties:
-- compatible: should be "brcm,iproc-mdio"
-- reg: address and length of the register set for the MDIO interface
-- #size-cells: must be 1
-- #address-cells: must be 0
-
-Child nodes of this MDIO bus controller node are standard Ethernet PHY device
-nodes as described in Documentation/devicetree/bindings/net/phy.txt
-
-Example:
-
-mdio@18002000 {
-	compatible = "brcm,iproc-mdio";
-	reg = <0x18002000 0x8>;
-	#size-cells = <1>;
-	#address-cells = <0>;
-
-	enet-gphy@0 {
-		reg = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml
new file mode 100644
index 000000000000..3031395f7e6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,iproc-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc MDIO bus controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    const: brcm,iproc-mdio
+
+  reg:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    mdio@18002000 {
+        compatible = "brcm,iproc-mdio";
+        reg = <0x18002000 0x8>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            reg = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
deleted file mode 100644
index b58843f29591..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Properties for an MDIO bus multiplexer found in Broadcom iProc based SoCs.
-
-This MDIO bus multiplexer defines buses that could be internal as well as
-external to SoCs and could accept MDIO transaction compatible to C-22 or
-C-45 Clause. When child bus is selected, one needs to select these two
-properties as well to generate desired MDIO transaction on appropriate bus.
-
-Required properties in addition to the generic multiplexer properties:
-
-MDIO multiplexer node:
-- compatible: brcm,mdio-mux-iproc.
-
-Every non-ethernet PHY requires a compatible so that it could be probed based
-on this compatible string.
-
-Optional properties:
-- clocks: phandle of the core clock which drives the mdio block.
-
-Additional information regarding generic multiplexer properties can be found
-at- Documentation/devicetree/bindings/net/mdio-mux.txt
-
-
-for example:
-		mdio_mux_iproc: mdio-mux@66020000 {
-			compatible = "brcm,mdio-mux-iproc";
-			reg = <0x66020000 0x250>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			mdio@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pci_phy0: pci-phy@0 {
-					compatible = "brcm,ns2-pcie-phy";
-					reg = <0x0>;
-					#phy-cells = <0>;
-				};
-			};
-
-			mdio@7 {
-				reg = <0x7>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pci_phy1: pci-phy@0 {
-					compatible = "brcm,ns2-pcie-phy";
-					reg = <0x0>;
-					#phy-cells = <0>;
-				};
-			};
-			mdio@10 {
-				reg = <0x10>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gphy0: eth-phy@10 {
-					reg = <0x10>;
-				};
-			};
-		};
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
new file mode 100644
index 000000000000..af96b4fd89d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,mdio-mux-iproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO bus multiplexer found in Broadcom iProc based SoCs.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description:
+  This MDIO bus multiplexer defines buses that could be internal as well as
+  external to SoCs and could accept MDIO transaction compatible to C-22 or
+  C-45 Clause. When child bus is selected, one needs to select these two
+  properties as well to generate desired MDIO transaction on appropriate bus.
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: brcm,mdio-mux-iproc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: core clock driving the MDIO block
+
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio_mux_iproc: mdio-mux@66020000 {
+        compatible = "brcm,mdio-mux-iproc";
+        reg = <0x66020000 0x250>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+           reg = <0x0>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           pci_phy0: pci-phy@0 {
+              compatible = "brcm,ns2-pcie-phy";
+              reg = <0x0>;
+              #phy-cells = <0>;
+           };
+        };
+
+        mdio@7 {
+           reg = <0x7>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           pci_phy1: pci-phy@0 {
+              compatible = "brcm,ns2-pcie-phy";
+              reg = <0x0>;
+              #phy-cells = <0>;
+           };
+        };
+
+        mdio@10 {
+           reg = <0x10>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           gphy0: eth-phy@10 {
+              reg = <0x10>;
+           };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.txt b/Documentation/devicetree/bindings/net/brcm,systemport.txt
deleted file mode 100644
index 83f29e0e11ba..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,systemport.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
-
-Required properties:
-- compatible: should be one of:
-	      "brcm,systemport-v1.00"
-	      "brcm,systemportlite-v1.00" or
-	      "brcm,systemport"
-- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the rx
-  interrupts, and the second cell should be for the transmit queues. An
-  optional third interrupt cell for Wake-on-LAN can be specified
-- local-mac-address: Ethernet MAC address (48 bits) of this adapter
-- phy-mode: Should be a string describing the PHY interface to the
-  Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
-- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for
-  the property specific details
-
-Optional properties:
-- systemport,num-tier2-arb: number of tier 2 arbiters, an integer
-- systemport,num-tier1-arb: number of tier 1 arbiters, an integer
-- systemport,num-txq: number of HW transmit queues, an integer
-- systemport,num-rxq: number of HW receive queues, an integer
-
-Example:
-ethernet@f04a0000 {
-	compatible = "brcm,systemport-v1.00";
-	reg = <0xf04a0000 0x4650>;
-	local-mac-address = [ 00 11 22 33 44 55 ];
-	fixed-link = <0 1 1000 0 0>;
-	phy-mode = "gmii";
-	interrupts = <0x0 0x16 0x0>,
-		<0x0 0x17 0x0>;
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.yaml b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
new file mode 100644
index 000000000000..5fc9c9fafd85
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,systemport.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,systemport-v1.00
+      - brcm,systemportlite-v1.00
+      - brcm,systemport
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: interrupt line for RX queues
+      - description: interrupt line for TX queues
+      - description: interrupt line for Wake-on-LAN
+
+  clocks:
+    items:
+      - description: main clock
+      - description: Wake-on-LAN clock
+
+  clock-names:
+    items:
+      - const: sw_sysport
+      - const: sw_sysportwol
+
+  systemport,num-tier2-arb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of tier 2 arbiters
+
+  systemport,num-tier1-arb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of tier 2 arbiters
+
+  systemport,num-txq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description:
+      Number of HW transmit queues
+
+  systemport,num-rxq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description:
+      Number of HW receive queues
+
+required:
+  - reg
+  - interrupts
+  - phy-mode
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@f04a0000 {
+        compatible = "brcm,systemport-v1.00";
+        reg = <0xf04a0000 0x4650>;
+        local-mac-address = [ 00 11 22 33 44 55 ];
+        phy-mode = "gmii";
+        interrupts = <0x0 0x16 0x0>,
+                     <0x0 0x17 0x0>;
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
deleted file mode 100644
index e15589f47787..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Broadcom UniMAC MDIO bus controller
-
-Required properties:
-- compatible: should one from "brcm,genet-mdio-v1", "brcm,genet-mdio-v2",
-  "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5" or
-  "brcm,unimac-mdio"
-- reg: address and length of the register set for the device, first one is the
-  base register, and the second one is optional and for indirect accesses to
-  larger than 16-bits MDIO transactions
-- reg-names: name(s) of the register must be "mdio" and optional "mdio_indir_rw"
-- #size-cells: must be 1
-- #address-cells: must be 0
-
-Optional properties:
-- interrupts: must be one if the interrupt is shared with the Ethernet MAC or
-  Ethernet switch this MDIO block is integrated from, or must be two, if there
-  are two separate interrupts, first one must be "mdio done" and second must be
-  for "mdio error"
-- interrupt-names: must be "mdio_done_error" when there is a share interrupt fed
-  to this hardware block, or must be "mdio_done" for the first interrupt and
-  "mdio_error" for the second when there are separate interrupts
-- clocks: A reference to the clock supplying the MDIO bus controller
-- clock-frequency: the MDIO bus clock that must be output by the MDIO bus
-  hardware, if absent, the default hardware values are used
-
-Child nodes of this MDIO bus controller node are standard Ethernet PHY device
-nodes as described in Documentation/devicetree/bindings/net/phy.txt
-
-Example:
-
-mdio@403c0 {
-	compatible = "brcm,unimac-mdio";
-	reg = <0x403c0 0x8 0x40300 0x18>;
-	reg-names = "mdio", "mdio_indir_rw";
-	#size-cells = <1>;
-	#address-cells = <0>;
-
-	...
-	phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
new file mode 100644
index 000000000000..0be426ee1e44
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,unimac-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom UniMAC MDIO bus controller
+
+maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,genet-mdio-v1
+      - brcm,genet-mdio-v2
+      - brcm,genet-mdio-v3
+      - brcm,genet-mdio-v4
+      - brcm,genet-mdio-v5
+      - brcm,unimac-mdio
+
+  reg:
+    minItems: 1
+    items:
+      - description: base register
+      - description: indirect accesses to larger than 16-bits MDIO transactions
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mdio
+      - const: mdio_indir_rw
+
+  interrupts:
+    oneOf:
+      - description: >
+          Interrupt shared with the Ethernet MAC or Ethernet switch this MDIO
+          block is integrated from
+      - items:
+          - description: |
+              "mdio done" interrupt
+          - description: |
+              "mdio error" interrupt
+
+  interrupt-names:
+    oneOf:
+      - const: mdio_done_error
+      - items:
+          - const: mdio_done
+          - const: mdio_error
+
+  clocks:
+    description: A reference to the clock supplying the MDIO bus controller
+
+  clock-frequency:
+    description: >
+      The MDIO bus clock that must be output by the MDIO bus hardware, if
+      absent, the default hardware values are used
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    mdio@403c0 {
+        compatible = "brcm,unimac-mdio";
+        reg = <0x403c0 0x8>, <0x40300 0x18>;
+        reg-names = "mdio", "mdio_indir_rw";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            compatible = "ethernet-phy-ieee802.3-c22";
+            reg = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
deleted file mode 100644
index dd258674633c..000000000000
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Broadcom Bluetooth Chips
----------------------
-
-This documents the binding structure and common properties for serial
-attached Broadcom devices.
-
-Serial attached Broadcom devices shall be a child node of the host UART
-device the slave device is attached to.
-
-Required properties:
-
- - compatible: should contain one of the following:
-   * "brcm,bcm20702a1"
-   * "brcm,bcm4329-bt"
-   * "brcm,bcm4330-bt"
-   * "brcm,bcm43438-bt"
-   * "brcm,bcm4345c5"
-   * "brcm,bcm43540-bt"
-   * "brcm,bcm4335a0"
-
-Optional properties:
-
- - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
- - shutdown-gpios: GPIO specifier, used to enable the BT module
- - device-wakeup-gpios: GPIO specifier, used to wakeup the controller
- - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor.
-                      deprecated, replaced by interrupts and
-                      "host-wakeup" interrupt-names
- - clocks: 1 or 2 clocks as defined in clock-names below, in that order
- - clock-names: names for clock inputs, matching the clocks given
-   - "extclk": deprecated, replaced by "txco"
-   - "txco": external reference clock (not a standalone crystal)
-   - "lpo": external low power 32.768 kHz clock
- - vbat-supply: phandle to regulator supply for VBAT
- - vddio-supply: phandle to regulator supply for VDDIO
- - brcm,bt-pcm-int-params: configure PCM parameters via a 5-byte array
-    - sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S
-    - pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps
-    - pcm-frame-type: short, long
-    - pcm-sync-mode: slave, master
-    - pcm-clock-mode: slave, master
- - interrupts: must be one, used to wakeup the host processor
- - interrupt-names: must be "host-wakeup"
-
-Example:
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
-
-       bluetooth {
-               compatible = "brcm,bcm43438-bt";
-               max-speed = <921600>;
-               brcm,bt-pcm-int-params = [01 02 00 01 01];
-       };
-};
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
new file mode 100644
index 000000000000..445b2a553625
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/broadcom-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Bluetooth Chips
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  This binding describes Broadcom UART-attached bluetooth chips.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm20702a1
+      - brcm,bcm4329-bt
+      - brcm,bcm4330-bt
+      - brcm,bcm4334-bt
+      - brcm,bcm43438-bt
+      - brcm,bcm4345c5
+      - brcm,bcm43540-bt
+      - brcm,bcm4335a0
+      - brcm,bcm4349-bt
+      - infineon,cyw55572-bt
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO specifier for the line BT_REG_ON used to
+      power on the BT module
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO specifier for the line BT_RST_N used to
+      reset the BT module. This should be marked as
+      GPIO_ACTIVE_LOW.
+
+  device-wakeup-gpios:
+    maxItems: 1
+    description: GPIO specifier for the line BT_WAKE used to
+      wakeup the controller. This is using the BT_GPIO_0
+      pin on the chip when in use.
+
+  host-wakeup-gpios:
+    maxItems: 1
+    deprecated: true
+    description: GPIO specifier for the line HOST_WAKE used
+      to wakeup the host processor. This is using he BT_GPIO_1
+      pin on the chip when in use. This is deprecated and replaced
+      by interrupts and "host-wakeup" interrupt-names
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    description: 1 or 2 clocks as defined in clock-names below,
+      in that order
+
+  clock-names:
+    description: Names of the 1 to 2 supplied clocks
+    oneOf:
+      - const: extclk
+        deprecated: true
+        description: Deprecated in favor of txco
+
+      - const: txco
+        description: >
+          external reference clock (not a standalone crystal)
+
+      - const: lpo
+        description: >
+          external low power 32.768 kHz clock
+
+      - items:
+          - const: txco
+          - const: lpo
+
+  vbat-supply:
+    description: phandle to regulator supply for VBAT
+
+  vddio-supply:
+    description: phandle to regulator supply for VDDIO
+
+  brcm,bt-pcm-int-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 5
+    maxItems: 5
+    description: |-
+      configure PCM parameters via a 5-byte array:
+       sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S
+       pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps
+       pcm-frame-type: short, long
+       pcm-sync-mode: slave, master
+       pcm-clock-mode: slave, master
+
+  brcm,requires-autobaud-mode:
+    type: boolean
+    description:
+      Set this property if autobaud mode is required. Autobaud mode is required
+      if the device's initial baud rate in normal mode is not supported by the
+      host or if the device requires autobaud mode startup before loading FW.
+
+  interrupts:
+    items:
+      - description: Handle to the line HOST_WAKE used to wake
+          up the host processor. This uses the BT_GPIO_1 pin on
+          the chip when in use.
+
+  interrupt-names:
+    items:
+      - const: host-wakeup
+
+  max-speed: true
+  current-speed: true
+
+required:
+  - compatible
+
+dependencies:
+  brcm,requires-autobaud-mode: [ 'shutdown-gpios' ]
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - brcm,bcm20702a1
+            - brcm,bcm4329-bt
+            - brcm,bcm4330-bt
+then:
+  properties:
+    reset-gpios: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    uart {
+        uart-has-rtscts;
+
+        bluetooth {
+            compatible = "brcm,bcm4330-bt";
+            max-speed = <921600>;
+            brcm,bt-pcm-int-params = [01 02 00 01 01];
+            shutdown-gpios = <&gpio 30 GPIO_ACTIVE_HIGH>;
+            device-wakeup-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+            interrupt-parent = <&gpio>;
+            interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt
index b1ad6ee68e90..f546b1f7dd6d 100644
--- a/Documentation/devicetree/bindings/net/btusb.txt
+++ b/Documentation/devicetree/bindings/net/btusb.txt
@@ -4,7 +4,7 @@ Generic Bluetooth controller over USB (btusb driver)
 Required properties:
 
   - compatible : should comply with the format "usbVID,PID" specified in
-		 Documentation/devicetree/bindings/usb/usb-device.txt
+		 Documentation/devicetree/bindings/usb/usb-device.yaml
 		 At the time of writing, the only OF supported devices
 		 (more may be added later) are:
 
@@ -38,7 +38,7 @@ Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt:
 	compatible = "usb1286,204e";
 	reg = <1>;
 	interrupt-parent = <&gpio0>;
-	interrupt-name = "wakeup";
+	interrupt-names = "wakeup";
 	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
     };
 };
diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt
deleted file mode 100644
index c8ae996bd8f2..000000000000
--- a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Calxeda Highbank 10Gb XGMAC Ethernet
-
-Required properties:
-- compatible : Should be "calxeda,hb-xgmac"
-- reg : Address and length of the register set for the device
-- interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt.
-  The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt.
-
-Optional properties:
-- dma-coherent      : Present if dma operations are coherent
-
-Example:
-
-ethernet@fff50000 {
-        compatible = "calxeda,hb-xgmac";
-        reg = <0xfff50000 0x1000>;
-        interrupts = <0 77 4  0 78 4  0 79 4>;
-};
diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml
new file mode 100644
index 000000000000..c3ca26666ede
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/calxeda-xgmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank 10Gb XGMAC Ethernet controller
+
+description: |
+  The Calxeda XGMAC Ethernet controllers are directly connected to the
+  internal machine "network fabric", which is set up, initialised and
+  managed by the firmware. So there are no PHY properties in this
+  binding. Switches in the fabric take care of routing and mapping the
+  traffic to external network ports.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: calxeda,hb-xgmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      Can point to at most 3 xgmac interrupts. The 1st one is the main
+      interrupt, the 2nd one is used for power management. The optional
+      3rd one is the low power state interrupt.
+    minItems: 2
+    maxItems: 3
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    ethernet@fff50000 {
+        compatible = "calxeda,hb-xgmac";
+        reg = <0xfff50000 0x1000>;
+        interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
index a95960ee3feb..3c51b2d02957 100644
--- a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
+++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
@@ -10,6 +10,9 @@ maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
+allOf:
+  - $ref: can-controller.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -17,6 +20,7 @@ properties:
           - const: allwinner,sun7i-a20-can
           - const: allwinner,sun4i-a10-can
       - const: allwinner,sun4i-a10-can
+      - const: allwinner,sun8i-r40-can
 
   reg:
     maxItems: 1
@@ -27,6 +31,19 @@ properties:
   clocks:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun8i-r40-can
+
+then:
+  required:
+    - resets
+
 required:
   - compatible
   - reg
@@ -47,5 +64,15 @@ examples:
         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&ccu CLK_APB1_CAN>;
     };
+  - |
+    #define RST_BUS_CAN		68
+    #define CLK_BUS_CAN		91
+    can1: can@1c2bc00 {
+        compatible = "allwinner,sun8i-r40-can";
+        reg = <0x01c2bc00 0x400>;
+        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CAN>;
+        resets = <&ccu RST_BUS_CAN>;
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
new file mode 100644
index 000000000000..51aa89ac7e85
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/bosch,c_can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch C_CAN/D_CAN controller Device Tree Bindings
+
+description: Bosch C_CAN/D_CAN controller for CAN bus
+
+maintainers:
+  - Dario Binacchi <dariobin@libero.it>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - bosch,c_can
+          - bosch,d_can
+          - ti,dra7-d_can
+          - ti,am3352-d_can
+      - items:
+          - enum:
+              - ti,am4372-d_can
+          - const: ti,am3352-d_can
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  power-domains:
+    description: |
+      Should contain a phandle to a PM domain provider node and an args
+      specifier containing the DCAN device id value. It's mandatory for
+      Keystone 2 66AK2G SoCs only.
+    maxItems: 1
+
+  clocks:
+    description: |
+      CAN functional clock phandle.
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  syscon-raminit:
+    description: |
+      Handle to system control region that contains the RAMINIT register,
+      register offset to the RAMINIT register and the CAN instance number (0
+      offset).
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: The phandle to the system control region.
+          - description: The register offset.
+          - description: The CAN instance number.
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - bosch,d_can
+
+then:
+  properties:
+    interrupts:
+      items:
+        - description: Error and status IRQ
+        - description: Message object IRQ
+        - description: RAM ECC correctable error IRQ
+        - description: RAM ECC non-correctable error IRQ
+
+else:
+  properties:
+    interrupts:
+      items:
+        - description: Error and status IRQ
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/altr,rst-mgr.h>
+
+    can@ffc00000 {
+       compatible = "bosch,d_can";
+       reg = <0xffc00000 0x1000>;
+       interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+       clocks = <&can0_clk>;
+       resets = <&rst CAN0_RESET>;
+    };
+  - |
+    can@0 {
+        compatible = "ti,am3352-d_can";
+        reg = <0x0 0x2000>;
+        clocks = <&dcan1_fck>;
+        clock-names = "fck";
+        syscon-raminit = <&scm_conf 0x644 1>;
+        interrupts = <55>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
new file mode 100644
index 000000000000..26aa0830eea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch MCAN controller Bindings
+
+description: Bosch MCAN controller for CAN bus
+
+maintainers:
+  - Chandrasekar Ramakrishnan <rcsekar@samsung.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    const: bosch,m_can
+
+  reg:
+    items:
+      - description: M_CAN registers map
+      - description: message RAM
+
+  reg-names:
+    items:
+      - const: m_can
+      - const: message_ram
+
+  interrupts:
+    items:
+      - description: interrupt line0
+      - description: interrupt line1
+    minItems: 1
+
+  interrupt-names:
+    items:
+      - const: int0
+      - const: int1
+    minItems: 1
+
+  clocks:
+    items:
+      - description: peripheral clock
+      - description: bus clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: cclk
+
+  bosch,mram-cfg:
+    description: |
+      Message RAM configuration data.
+      Multiple M_CAN instances can share the same Message RAM
+      and each element(e.g Rx FIFO or Tx Buffer and etc) number
+      in Message RAM is also configurable, so this property is
+      telling driver how the shared or private Message RAM are
+      used by this M_CAN controller.
+
+      The format should be as follows:
+      <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
+      The 'offset' is an address offset of the Message RAM where
+      the following elements start from. This is usually set to
+      0x0 if you're using a private Message RAM. The remain cells
+      are used to specify how many elements are used for each FIFO/Buffer.
+
+      M_CAN includes the following elements according to user manual:
+      11-bit Filter	0-128 elements / 0-128 words
+      29-bit Filter	0-64 elements / 0-128 words
+      Rx FIFO 0		0-64 elements / 0-1152 words
+      Rx FIFO 1		0-64 elements / 0-1152 words
+      Rx Buffers	0-64 elements / 0-1152 words
+      Tx Event FIFO	0-32 elements / 0-64 words
+      Tx Buffers	0-32 elements / 0-576 words
+
+      Please refer to 2.4.1 Message RAM Configuration in Bosch
+      M_CAN user manual for details.
+    $ref: /schemas/types.yaml#/definitions/int32-array
+    items:
+      - description: The 'offset' is an address offset of the Message RAM where
+          the following elements start from. This is usually set to 0x0 if
+          you're using a private Message RAM.
+        default: 0
+      - description: 11-bit Filter 0-128 elements / 0-128 words
+        minimum: 0
+        maximum: 128
+      - description: 29-bit Filter 0-64 elements / 0-128 words
+        minimum: 0
+        maximum: 64
+      - description: Rx FIFO 0 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Rx FIFO 1 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Rx Buffers 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Tx Event FIFO 0-32 elements / 0-64 words
+        minimum: 0
+        maximum: 32
+      - description: Tx Buffers 0-32 elements / 0-576 words
+        minimum: 0
+        maximum: 32
+    minItems: 1
+
+  power-domains:
+    description:
+      Power domain provider node and an args specifier containing
+      the can device id value.
+    maxItems: 1
+
+  can-transceiver:
+    $ref: can-transceiver.yaml#
+
+  phys:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - bosch,mram-cfg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6sx-clock.h>
+    can@20e8000 {
+      compatible = "bosch,m_can";
+      reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
+      reg-names = "m_can", "message_ram";
+      interrupts = <0 114 0x04>, <0 114 0x04>;
+      interrupt-names = "int0", "int1";
+      clocks = <&clks IMX6SX_CLK_CANFD>,
+               <&clks IMX6SX_CLK_CANFD>;
+      clock-names = "hclk", "cclk";
+      bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
+
+      can-transceiver {
+        max-bitrate = <5000000>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt
deleted file mode 100644
index 2d504256b0d8..000000000000
--- a/Documentation/devicetree/bindings/net/can/c_can.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Bosch C_CAN/D_CAN controller Device Tree Bindings
--------------------------------------------------
-
-Required properties:
-- compatible		: Should be "bosch,c_can" for C_CAN controllers and
-			  "bosch,d_can" for D_CAN controllers.
-			  Can be "ti,dra7-d_can", "ti,am3352-d_can" or
-			  "ti,am4372-d_can".
-- reg			: physical base address and size of the C_CAN/D_CAN
-			  registers map
-- interrupts		: property with a value describing the interrupt
-			  number
-
-The following are mandatory properties for DRA7x, AM33xx and AM43xx SoCs only:
-- ti,hwmods		: Must be "d_can<n>" or "c_can<n>", n being the
-			  instance number
-
-The following are mandatory properties for Keystone 2 66AK2G SoCs only:
-- power-domains		: Should contain a phandle to a PM domain provider node
-			  and an args specifier containing the DCAN device id
-			  value. This property is as per the binding,
-			  Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
-- clocks		: CAN functional clock phandle. This property is as per the
-			  binding,
-			  Documentation/devicetree/bindings/clock/ti,sci-clk.txt
-
-Optional properties:
-- syscon-raminit	: Handle to system control region that contains the
-			  RAMINIT register, register offset to the RAMINIT
-			  register and the CAN instance number (0 offset).
-
-Note: "ti,hwmods" field is used to fetch the base address and irq
-resources from TI, omap hwmod data base during device registration.
-Future plan is to migrate hwmod data base contents into device tree
-blob so that, all the required data will be used from device tree dts
-file.
-
-Example:
-
-Step1: SoC common .dtsi file
-
-	dcan1: d_can@481d0000 {
-		compatible = "bosch,d_can";
-		reg = <0x481d0000 0x2000>;
-		interrupts = <55>;
-		interrupt-parent = <&intc>;
-		status = "disabled";
-	};
-
-(or)
-
-	dcan1: d_can@481d0000 {
-		compatible = "bosch,d_can";
-		ti,hwmods = "d_can1";
-		reg = <0x481d0000 0x2000>;
-		interrupts = <55>;
-		interrupt-parent = <&intc>;
-		status = "disabled";
-	};
-
-Step 2: board specific .dts file
-
-	&dcan1 {
-		status = "okay";
-	};
diff --git a/Documentation/devicetree/bindings/net/can/can-controller.yaml b/Documentation/devicetree/bindings/net/can/can-controller.yaml
new file mode 100644
index 000000000000..1f0e98051074
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/can-controller.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/can-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN Controller Generic Binding
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+  $nodename:
+    pattern: "^can(@.*)?$"
+
+  termination-gpios:
+    description: GPIO pin to enable CAN bus termination.
+    maxItems: 1
+
+  termination-ohms:
+    description: The resistance value of the CAN bus termination resistor.
+    minimum: 1
+    maximum: 65535
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.txt b/Documentation/devicetree/bindings/net/can/can-transceiver.txt
deleted file mode 100644
index 0011f53ff159..000000000000
--- a/Documentation/devicetree/bindings/net/can/can-transceiver.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Generic CAN transceiver Device Tree binding
-------------------------------
-
-CAN transceiver typically limits the max speed in standard CAN and CAN FD
-modes. Typically these limitations are static and the transceivers themselves
-provide no way to detect this limitation at runtime. For this situation,
-the "can-transceiver" node can be used.
-
-Required Properties:
- max-bitrate:	a positive non 0 value that determines the max
-		speed that CAN/CAN-FD can run. Any other value
-		will be ignored.
-
-Examples:
-
-Based on Texas Instrument's TCAN1042HGV CAN Transceiver
-
-m_can0 {
-	....
-	can-transceiver {
-		max-bitrate = <5000000>;
-	};
-	...
-};
diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
new file mode 100644
index 000000000000..d1ef1fe6ab29
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/can-transceiver.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN transceiver Bindings
+
+description: CAN transceiver generic properties bindings
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  max-bitrate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run.
+    minimum: 1
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
new file mode 100644
index 000000000000..4635cb96fc64
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/ctu,ctucanfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CTU CAN FD Open-source IP Core Device Tree Bindings
+
+description: |
+  Open-source CAN FD IP core developed at the Czech Technical University in Prague
+
+  The core sources and documentation on project page
+    [1] sources : https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core
+    [2] datasheet : https://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/doc/Datasheet.pdf
+
+  Integration in Xilinx Zynq SoC based system together with
+  OpenCores SJA1000 compatible controllers
+    [3] project : https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top
+  Martin Jerabek dimploma thesis with integration and testing
+  framework description
+    [4] PDF : https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf
+
+maintainers:
+  - Pavel Pisa <pisa@cmp.felk.cvut.cz>
+  - Ondrej Ille <ondrej.ille@gmail.com>
+  - Martin Jerabek <martin.jerabek01@gmail.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: ctu,ctucanfd-2
+          - const: ctu,ctucanfd
+      - const: ctu,ctucanfd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: |
+      phandle of reference clock (100 MHz is appropriate
+      for FPGA implementation on Zynq-7000 system).
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    ctu_can_fd_0: can@43c30000 {
+      compatible = "ctu,ctucanfd";
+      interrupts = <0 30 4>;
+      clocks = <&clkc 15>;
+      reg = <0x43c30000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
new file mode 100644
index 000000000000..e52db841bb8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8qm-flexcan
+          - fsl,imx8mp-flexcan
+          - fsl,imx6q-flexcan
+          - fsl,imx28-flexcan
+          - fsl,imx25-flexcan
+          - fsl,p1010-flexcan
+          - fsl,vf610-flexcan
+          - fsl,ls1021ar2-flexcan
+          - fsl,lx2160ar1-flexcan
+      - items:
+          - enum:
+              - fsl,imx53-flexcan
+              - fsl,imx35-flexcan
+          - const: fsl,imx25-flexcan
+      - items:
+          - enum:
+              - fsl,imx7d-flexcan
+              - fsl,imx6ul-flexcan
+              - fsl,imx6sx-flexcan
+          - const: fsl,imx6q-flexcan
+      - items:
+          - enum:
+              - fsl,ls1028ar1-flexcan
+          - const: fsl,lx2160ar1-flexcan
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+  clock-frequency:
+    description: |
+      The oscillator frequency driving the flexcan device, filled in by the
+      boot loader. This property should only be used the used operating system
+      doesn't support the clocks and clock-names property.
+
+  xceiver-supply:
+    description: Regulator that powers the CAN transceiver.
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      This means the registers of FlexCAN controller are big endian. This is
+      optional property.i.e. if this property is not present in device tree
+      node then controller is assumed to be little endian. If this property is
+      present then controller is assumed to be big endian.
+
+  fsl,stop-mode:
+    description: |
+      Register bits of stop mode control.
+
+      The format should be as follows:
+      <gpr req_gpr req_bit>
+      gpr is the phandle to general purpose register node.
+      req_gpr is the gpr register offset of CAN stop request.
+      req_bit is the bit offset of CAN stop request.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: The 'gpr' is the phandle to general purpose register node.
+          - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+            maximum: 0xff
+          - description: The 'req_bit' is the bit offset of CAN stop request.
+            maximum: 0x1f
+
+  fsl,clk-source:
+    description: |
+      Select the clock source to the CAN Protocol Engine (PE). It's SoC
+      implementation dependent. Refer to RM for detailed definition. If this
+      property is not set in device tree node then driver selects clock source 1
+      by default.
+      0: clock source 0 (oscillator clock)
+      1: clock source 1 (peripheral clock)
+    $ref: /schemas/types.yaml#/definitions/uint8
+    default: 1
+    minimum: 0
+    maximum: 1
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable CAN remote wakeup.
+
+  fsl,scu-index:
+    description: |
+      The scu index of CAN instance.
+      For SoCs with SCU support, need setup stop mode via SCU firmware, so this
+      property can help indicate a resource. It supports up to 3 CAN instances
+      now.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 0
+    maximum: 2
+
+  termination-gpios: true
+  termination-ohms: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    can@1c000 {
+        compatible = "fsl,p1010-flexcan";
+        reg = <0x1c000 0x1000>;
+        interrupts = <48 0x2>;
+        interrupt-parent = <&mpic>;
+        clock-frequency = <200000000>;
+        fsl,clk-source = /bits/ 8 <0>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    can@2090000 {
+        compatible = "fsl,imx6q-flexcan";
+        reg = <0x02090000 0x4000>;
+        interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks 1>, <&clks 2>;
+        clock-names = "ipg", "per";
+        fsl,stop-mode = <&gpr 0x34 28>;
+        fsl,scu-index = /bits/ 8 <1>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    can@2090000 {
+        compatible = "fsl,imx6q-flexcan";
+        reg = <0x02090000 0x4000>;
+        interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks 1>, <&clks 2>;
+        clock-names = "ipg", "per";
+        fsl,stop-mode = <&gpr 0x34 28>;
+        termination-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+        termination-ohms = <120>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
deleted file mode 100644
index 94c0f8bf4deb..000000000000
--- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
-
-Required properties:
-
-- compatible : Should be "fsl,<processor>-flexcan"
-
-  An implementation should also claim any of the following compatibles
-  that it is fully backwards compatible with:
-
-  - fsl,p1010-flexcan
-
-- reg : Offset and length of the register set for this device
-- interrupts : Interrupt tuple for this device
-
-Optional properties:
-
-- clock-frequency : The oscillator frequency driving the flexcan device
-
-- xceiver-supply: Regulator that powers the CAN transceiver
-
-- big-endian: This means the registers of FlexCAN controller are big endian.
-              This is optional property.i.e. if this property is not present in
-              device tree node then controller is assumed to be little endian.
-              if this property is present then controller is assumed to be big
-              endian.
-
-- fsl,stop-mode: register bits of stop mode control, the format is
-		 <&gpr req_gpr req_bit ack_gpr ack_bit>.
-		 gpr is the phandle to general purpose register node.
-		 req_gpr is the gpr register offset of CAN stop request.
-		 req_bit is the bit offset of CAN stop request.
-		 ack_gpr is the gpr register offset of CAN stop acknowledge.
-		 ack_bit is the bit offset of CAN stop acknowledge.
-
-- fsl,clk-source: Select the clock source to the CAN Protocol Engine (PE).
-		  It's SoC Implementation dependent. Refer to RM for detailed
-		  definition. If this property is not set in device tree node
-		  then driver selects clock source 1 by default.
-		  0: clock source 0 (oscillator clock)
-		  1: clock source 1 (peripheral clock)
-
-- wakeup-source: enable CAN remote wakeup
-
-Example:
-
-	can@1c000 {
-		compatible = "fsl,p1010-flexcan";
-		reg = <0x1c000 0x1000>;
-		interrupts = <48 0x2>;
-		interrupt-parent = <&mpic>;
-		clock-frequency = <200000000>; // filled in by bootloader
-		fsl,clk-source = <0>; // select clock source 0 for PE
-	};
diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
deleted file mode 100644
index ed614383af9c..000000000000
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Bosch MCAN controller Device Tree Bindings
--------------------------------------------------
-
-Required properties:
-- compatible		: Should be "bosch,m_can" for M_CAN controllers
-- reg			: physical base address and size of the M_CAN
-			  registers map and Message RAM
-- reg-names		: Should be "m_can" and "message_ram"
-- interrupts		: Should be the interrupt number of M_CAN interrupt
-			  line 0 and line 1, could be same if sharing
-			  the same interrupt.
-- interrupt-names	: Should contain "int0" and "int1"
-- clocks		: Clocks used by controller, should be host clock
-			  and CAN clock.
-- clock-names		: Should contain "hclk" and "cclk"
-- pinctrl-<n>		: Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
-- pinctrl-names 	: Names corresponding to the numbered pinctrl states
-- bosch,mram-cfg	: Message RAM configuration data.
-			  Multiple M_CAN instances can share the same Message
-			  RAM and each element(e.g Rx FIFO or Tx Buffer and etc)
-			  number in Message RAM is also configurable,
-			  so this property is telling driver how the shared or
-			  private Message RAM are used by this M_CAN controller.
-
-			  The format should be as follows:
-			  <offset sidf_elems xidf_elems rxf0_elems rxf1_elems
-			   rxb_elems txe_elems txb_elems>
-			  The 'offset' is an address offset of the Message RAM
-			  where the following elements start from. This is
-			  usually set to 0x0 if you're using a private Message
-			  RAM. The remain cells are used to specify how many
-			  elements are used for each FIFO/Buffer.
-
-			  M_CAN includes the following elements according to user manual:
-			  11-bit Filter	0-128 elements / 0-128 words
-			  29-bit Filter	0-64 elements / 0-128 words
-			  Rx FIFO 0	0-64 elements / 0-1152 words
-			  Rx FIFO 1	0-64 elements / 0-1152 words
-			  Rx Buffers	0-64 elements / 0-1152 words
-			  Tx Event FIFO	0-32 elements / 0-64 words
-			  Tx Buffers	0-32 elements / 0-576 words
-
-			  Please refer to 2.4.1 Message RAM Configuration in
-			  Bosch M_CAN user manual for details.
-
-Optional Subnode:
-- can-transceiver	: Can-transceiver subnode describing maximum speed
-			  that can be used for CAN/CAN-FD modes. See
-			  Documentation/devicetree/bindings/net/can/can-transceiver.txt
-			  for details.
-Example:
-SoC dtsi:
-m_can1: can@20e8000 {
-	compatible = "bosch,m_can";
-	reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
-	reg-names = "m_can", "message_ram";
-	interrupts = <0 114 0x04>,
-		     <0 114 0x04>;
-	interrupt-names = "int0", "int1";
-	clocks = <&clks IMX6SX_CLK_CANFD>,
-		 <&clks IMX6SX_CLK_CANFD>;
-	clock-names = "hclk", "cclk";
-	bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
-};
-
-Board dts:
-&m_can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_m_can1>;
-	status = "enabled";
-
-	can-transceiver {
-		max-bitrate = <5000000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
index 5a0111d4de58..381f8fb3e865 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
@@ -12,6 +12,9 @@ Required properties:
 Optional properties:
  - vdd-supply: Regulator that powers the CAN controller.
  - xceiver-supply: Regulator that powers the CAN transceiver.
+ - gpio-controller: Indicates this device is a GPIO controller.
+ - #gpio-cells: Should be two. The first cell is the pin number and
+                the second cell is used to specify the gpio polarity.
 
 Example:
 	can0: can@1 {
@@ -19,7 +22,9 @@ Example:
 		reg = <1>;
 		clocks = <&clk24m>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <13 0x2>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&reg5v0>;
 		xceiver-supply = <&reg5v0>;
+		gpio-controller;
+		#gpio-cells = <2>;
 	};
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
new file mode 100644
index 000000000000..7a73057707b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Microchip MCP2517FD, MCP2518FD and MCP251863 stand-alone CAN
+  controller device tree bindings
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - microchip,mcp2517fd
+          - microchip,mcp2518fd
+          - microchip,mcp251xfd
+      - items:
+          - enum:
+              - microchip,mcp251863
+          - const: microchip,mcp2518fd
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that powers the CAN controller.
+
+  xceiver-supply:
+    description: Regulator that powers the CAN transceiver.
+
+  microchip,rx-int-gpios:
+    description:
+      GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which
+      signals a pending RX interrupt.
+    maxItems: 1
+
+  spi-max-frequency:
+    description:
+      Must be half or less of "clocks" frequency.
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        can@0 {
+            compatible = "microchip,mcp251xfd";
+            reg = <0>;
+            clocks = <&can0_osc>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&can0_pins>;
+            spi-max-frequency = <20000000>;
+            interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>;
+            microchip,rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&reg5v0>;
+            xceiver-supply = <&reg5v0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
new file mode 100644
index 000000000000..45aa3de7cf01
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/microchip,mpfs-can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Microchip PolarFire SoC (MPFS) can controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    const: microchip,mpfs-can
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    can@2010c000 {
+        compatible = "microchip,mpfs-can";
+        reg = <0x2010c000 0x1000>;
+        clocks = <&clkcfg 17>;
+        interrupt-parent = <&plic>;
+        interrupts = <56>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
new file mode 100644
index 000000000000..144a3785132c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/nxp,sja1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
+
+maintainers:
+  - Wolfgang Grandegger <wg@grandegger.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nxp,sja1000
+          - technologic,sja1000
+      - items:
+          - enum:
+              - renesas,r9a06g032-sja1000 # RZ/N1D
+              - renesas,r9a06g033-sja1000 # RZ/N1S
+          - const: renesas,rzn1-sja1000 # RZ/N1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg-io-width:
+    description: I/O register width (in bytes) implemented by this device
+    default: 1
+    enum: [ 1, 2, 4 ]
+
+  nxp,external-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 16000000
+    description: |
+      Frequency of the external oscillator clock in Hz.
+      The internal clock frequency used by the SJA1000 is half of that value.
+
+  nxp,tx-output-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+    default: 1
+    description: |
+      operation mode of the TX output control logic. Valid values are:
+        <0> : bi-phase output mode
+        <1> : normal output mode (default)
+        <2> : test output mode
+        <3> : clock output mode
+
+  nxp,tx-output-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x02
+    description: |
+      TX output pin configuration. Valid values are any one of the below
+      or combination of TX0 and TX1:
+        <0x01> : TX0 invert
+        <0x02> : TX0 pull-down (default)
+        <0x04> : TX0 pull-up
+        <0x06> : TX0 push-pull
+        <0x08> : TX1 invert
+        <0x10> : TX1 pull-down
+        <0x20> : TX1 pull-up
+        <0x30> : TX1 push-pull
+
+  nxp,clock-out-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      clock frequency in Hz on the CLKOUT pin.
+      If not specified or if the specified value is 0, the CLKOUT pin
+      will be disabled.
+
+  nxp,no-comparator-bypass:
+    type: boolean
+    description: Allows to disable the CAN input comparator.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - technologic,sja1000
+              - renesas,rzn1-sja1000
+    then:
+      required:
+        - reg-io-width
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rzn1-sja1000
+    then:
+      required:
+        - clocks
+        - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    can@1a000 {
+        compatible = "technologic,sja1000";
+        reg = <0x1a000 0x100>;
+        interrupts = <1>;
+        reg-io-width = <2>;
+        nxp,tx-output-config = <0x06>;
+        nxp,external-clock-frequency = <24000000>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    can@52104000 {
+        compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
+        reg = <0x52104000 0x800>;
+        reg-io-width = <4>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&sysctrl R9A06G032_HCLK_CAN0>;
+        power-domains = <&sysctrl>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
deleted file mode 100644
index 85c6551b602a..000000000000
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-Renesas R-Car CAN controller Device Tree Bindings
--------------------------------------------------
-
-Required properties:
-- compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
-	      "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
-	      "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
-	      "renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC.
-	      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
-	      "renesas,can-r8a774b1" if CAN controller is a part of R8A774B1 SoC.
-	      "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC.
-	      "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
-	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
-	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
-	      "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC.
-	      "renesas,can-r8a7792" if CAN controller is a part of R8A7792 SoC.
-	      "renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC.
-	      "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
-	      "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
-	      "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC.
-	      "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC.
-	      "renesas,can-r8a77990" if CAN controller is a part of R8A77990 SoC.
-	      "renesas,can-r8a77995" if CAN controller is a part of R8A77995 SoC.
-	      "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
-	      "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
-	      compatible device.
-	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
-	      compatible device.
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: physical base address and size of the R-Car CAN register map.
-- interrupts: interrupt specifier for the sole interrupt.
-- clocks: phandles and clock specifiers for 3 CAN clock inputs.
-- clock-names: 3 clock input name strings: "clkp1", "clkp2", and "can_clk".
-- pinctrl-0: pin control group to be used for this controller.
-- pinctrl-names: must be "default".
-
-Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796,
-R8A77965, R8A77990, and R8A77995:
-For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
-be used by both CAN and CAN FD controller at the same time. It needs to be
-scaled to maximum frequency if any of these controllers use it. This is done
-using the below properties:
-
-- assigned-clocks: phandle of clkp2(CANFD) clock.
-- assigned-clock-rates: maximum frequency of this clock.
-
-Optional properties:
-- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
-			    <0x0> (default) : Peripheral clock (clkp1)
-			    <0x1> : Peripheral clock (clkp2)
-			    <0x3> : External input clock
-
-Example
--------
-
-SoC common .dtsi file:
-
-	can0: can@e6e80000 {
-		compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
-		reg = <0 0xe6e80000 0 0x1000>;
-		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
-			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
-		clock-names = "clkp1", "clkp2", "can_clk";
-		status = "disabled";
-	};
-
-Board specific .dts file:
-
-&can0 {
-	pinctrl-0 = <&can0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
deleted file mode 100644
index 13a4e34c0c73..000000000000
--- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
+++ /dev/null
@@ -1,106 +0,0 @@
-Renesas R-Car CAN FD controller Device Tree Bindings
-----------------------------------------------------
-
-Required properties:
-- compatible: Must contain one or more of the following:
-  - "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers.
-  - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller.
-  - "renesas,r8a774b1-canfd" for R8A774B1 (RZ/G2N) compatible controller.
-  - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller.
-  - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
-  - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
-  - "renesas,r8a77965-canfd" for R8A77965 (R-Car M3-N) compatible controller.
-  - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller.
-  - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller.
-  - "renesas,r8a77990-canfd" for R8A77990 (R-Car E3) compatible controller.
-  - "renesas,r8a77995-canfd" for R8A77995 (R-Car D3) compatible controller.
-
-  When compatible with the generic version, nodes must list the
-  SoC-specific version corresponding to the platform first, followed by the
-  family-specific and/or generic versions.
-
-- reg: physical base address and size of the R-Car CAN FD register map.
-- interrupts: interrupt specifiers for the Channel & Global interrupts
-- clocks: phandles and clock specifiers for 3 clock inputs.
-- clock-names: 3 clock input name strings: "fck", "canfd", "can_clk".
-- pinctrl-0: pin control group to be used for this controller.
-- pinctrl-names: must be "default".
-
-Required child nodes:
-The controller supports two channels and each is represented as a child node.
-The name of the child nodes are "channel0" and "channel1" respectively. Each
-child node supports the "status" property only, which is used to
-enable/disable the respective channel.
-
-Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796,
-R8A77965, R8A77990, and R8A77995:
-In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN
-and CAN FD controller at the same time. It needs to be scaled to maximum
-frequency if any of these controllers use it. This is done using the below
-properties:
-
-- assigned-clocks: phandle of canfd clock.
-- assigned-clock-rates: maximum frequency of this clock.
-
-Optional property:
-The controller can operate in either CAN FD only mode (default) or
-Classical CAN only mode. The mode is global to both the channels. In order to
-enable the later, define the following optional property.
- - renesas,no-can-fd: puts the controller in Classical CAN only mode.
-
-Example
--------
-
-SoC common .dtsi file:
-
-		canfd: can@e66c0000 {
-			compatible = "renesas,r8a7795-canfd",
-				     "renesas,rcar-gen3-canfd";
-			reg = <0 0xe66c0000 0 0x8000>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 914>,
-			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
-			       <&can_clk>;
-			clock-names = "fck", "canfd", "can_clk";
-			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
-			power-domains = <&cpg>;
-			status = "disabled";
-
-			channel0 {
-				status = "disabled";
-			};
-
-			channel1 {
-				status = "disabled";
-			};
-		};
-
-Board specific .dts file:
-
-E.g. below enables Channel 1 alone in the board in Classical CAN only mode.
-
-&canfd {
-	pinctrl-0 = <&canfd1_pins>;
-	pinctrl-names = "default";
-	renesas,no-can-fd;
-	status = "okay";
-
-	channel1 {
-		status = "okay";
-	};
-};
-
-E.g. below enables Channel 0 alone in the board using External clock
-as fCAN clock.
-
-&canfd {
-	pinctrl-0 = <&canfd0_pins &can_clk_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	channel0 {
-		status = "okay";
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml
new file mode 100644
index 000000000000..fadc871fd6b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/renesas,rcar-can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car CAN Controller
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,can-r8a7778      # R-Car M1-A
+              - renesas,can-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-can # R-Car Gen1
+
+      - items:
+          - enum:
+              - renesas,can-r8a7742      # RZ/G1H
+              - renesas,can-r8a7743      # RZ/G1M
+              - renesas,can-r8a7744      # RZ/G1N
+              - renesas,can-r8a7745      # RZ/G1E
+              - renesas,can-r8a77470     # RZ/G1C
+              - renesas,can-r8a7790      # R-Car H2
+              - renesas,can-r8a7791      # R-Car M2-W
+              - renesas,can-r8a7792      # R-Car V2H
+              - renesas,can-r8a7793      # R-Car M2-N
+              - renesas,can-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-can # R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,can-r8a774a1     # RZ/G2M
+              - renesas,can-r8a774b1     # RZ/G2N
+              - renesas,can-r8a774c0     # RZ/G2E
+              - renesas,can-r8a774e1     # RZ/G2H
+              - renesas,can-r8a7795      # R-Car H3
+              - renesas,can-r8a7796      # R-Car M3-W
+              - renesas,can-r8a77961     # R-Car M3-W+
+              - renesas,can-r8a77965     # R-Car M3-N
+              - renesas,can-r8a77990     # R-Car E3
+              - renesas,can-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-can # R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: clkp1
+      - const: clkp2
+      - const: can_clk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,can-clock-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 3 ]
+    default: 0
+    description: |
+      R-Car CAN Clock Source Select.  Valid values are:
+        <0x0> (default) : Peripheral clock (clkp1)
+        <0x1> : Peripheral clock (clkp2)
+        <0x3> : External input clock
+
+  assigned-clocks:
+    description:
+      Reference to the clkp2 (CANFD) clock.
+      On R-Car Gen3 and RZ/G2 SoCs, "clkp2" is the CANFD clock.  This is a div6
+      clock and can be used by both CAN and CAN FD controllers at the same
+      time.  It needs to be scaled to maximum frequency if any of these
+      controllers use it.
+
+  assigned-clock-rates:
+    description: Maximum frequency of the CANFD clock.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+allOf:
+  - $ref: can-controller.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: renesas,rcar-gen1-can
+    then:
+      required:
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rcar-gen3-can
+    then:
+      required:
+        - assigned-clocks
+        - assigned-clock-rates
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    can0: can@e6e80000 {
+            compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
+            reg = <0xe6e80000 0x1000>;
+            interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 916>,
+                     <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>;
+            clock-names = "clkp1", "clkp2", "can_clk";
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 916>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
new file mode 100644
index 000000000000..6f71fc96bc4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/renesas,rcar-canfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car CAN FD Controller
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a774a1-canfd     # RZ/G2M
+              - renesas,r8a774b1-canfd     # RZ/G2N
+              - renesas,r8a774c0-canfd     # RZ/G2E
+              - renesas,r8a774e1-canfd     # RZ/G2H
+              - renesas,r8a7795-canfd      # R-Car H3
+              - renesas,r8a7796-canfd      # R-Car M3-W
+              - renesas,r8a77961-canfd     # R-Car M3-W+
+              - renesas,r8a77965-canfd     # R-Car M3-N
+              - renesas,r8a77970-canfd     # R-Car V3M
+              - renesas,r8a77980-canfd     # R-Car V3H
+              - renesas,r8a77990-canfd     # R-Car E3
+              - renesas,r8a77995-canfd     # R-Car D3
+          - const: renesas,rcar-gen3-canfd # R-Car Gen3 and RZ/G2
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-canfd    # RZ/G2UL
+              - renesas,r9a07g044-canfd    # RZ/G2{L,LC}
+              - renesas,r9a07g054-canfd    # RZ/V2L
+          - const: renesas,rzg2l-canfd     # RZ/G2L family
+
+      - const: renesas,r8a779a0-canfd      # R-Car V3U
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: fck
+      - const: canfd
+      - const: can_clk
+
+  power-domains:
+    maxItems: 1
+
+  resets: true
+
+  renesas,no-can-fd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The controller can operate in either CAN FD only mode (default) or
+      Classical CAN only mode.  The mode is global to both the channels.
+      Specify this property to put the controller in Classical CAN only mode.
+
+  assigned-clocks:
+    description:
+      Reference to the CANFD clock.  The CANFD clock is a div6 clock and can be
+      used by both CAN (if present) and CAN FD controllers at the same time.
+      It needs to be scaled to maximum frequency if any of these controllers
+      use it.
+
+  assigned-clock-rates:
+    description: Maximum frequency of the CANFD clock.
+
+patternProperties:
+  "^channel[01]$":
+    type: object
+    description:
+      The controller supports two channels and each is represented as a child
+      node.  Each child node supports the "status" property only, which
+      is used to enable/disable the respective channel.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - assigned-clocks
+  - assigned-clock-rates
+  - channel0
+  - channel1
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rzg2l-canfd
+then:
+  properties:
+    interrupts:
+      items:
+        - description: CAN global error interrupt
+        - description: CAN receive FIFO interrupt
+        - description: CAN0 error interrupt
+        - description: CAN0 transmit interrupt
+        - description: CAN0 transmit/receive FIFO receive completion interrupt
+        - description: CAN1 error interrupt
+        - description: CAN1 transmit interrupt
+        - description: CAN1 transmit/receive FIFO receive completion interrupt
+
+    interrupt-names:
+      items:
+        - const: g_err
+        - const: g_recc
+        - const: ch0_err
+        - const: ch0_rec
+        - const: ch0_trx
+        - const: ch1_err
+        - const: ch1_rec
+        - const: ch1_trx
+
+    resets:
+      maxItems: 2
+
+    reset-names:
+      items:
+        - const: rstp_n
+        - const: rstc_n
+
+  required:
+    - reset-names
+else:
+  properties:
+    interrupts:
+      items:
+        - description: Channel interrupt
+        - description: Global interrupt
+
+    interrupt-names:
+      items:
+        - const: ch_int
+        - const: g_int
+
+    resets:
+      maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    canfd: can@e66c0000 {
+            compatible = "renesas,r8a7795-canfd",
+                         "renesas,rcar-gen3-canfd";
+            reg = <0xe66c0000 0x8000>;
+            interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "ch_int", "g_int";
+            clocks = <&cpg CPG_MOD 914>,
+                     <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+                     <&can_clk>;
+            clock-names = "fck", "canfd", "can_clk";
+            assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+            assigned-clock-rates = <40000000>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 914>;
+
+            channel0 {
+            };
+
+            channel1 {
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/can/sja1000.txt b/Documentation/devicetree/bindings/net/can/sja1000.txt
deleted file mode 100644
index ac3160eca96a..000000000000
--- a/Documentation/devicetree/bindings/net/can/sja1000.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
-
-Required properties:
-
-- compatible : should be one of "nxp,sja1000", "technologic,sja1000".
-
-- reg : should specify the chip select, address offset and size required
-	to map the registers of the SJA1000. The size is usually 0x80.
-
-- interrupts: property with a value describing the interrupt source
-	(number and sensitivity) required for the SJA1000.
-
-Optional properties:
-
-- reg-io-width : Specify the size (in bytes) of the IO accesses that
-	should be performed on the device.  Valid value is 1, 2 or 4.
-	This property is ignored for technologic version.
-	Default to 1 (8 bits).
-
-- nxp,external-clock-frequency : Frequency of the external oscillator
-	clock in Hz. Note that the internal clock frequency used by the
-	SJA1000 is half of that value. If not specified, a default value
-	of 16000000 (16 MHz) is used.
-
-- nxp,tx-output-mode : operation mode of the TX output control logic:
-	<0x0> : bi-phase output mode
-	<0x1> : normal output mode (default)
-	<0x2> : test output mode
-	<0x3> : clock output mode
-
-- nxp,tx-output-config : TX output pin configuration:
-	<0x01> : TX0 invert
-	<0x02> : TX0 pull-down (default)
-	<0x04> : TX0 pull-up
-	<0x06> : TX0 push-pull
-	<0x08> : TX1 invert
-	<0x10> : TX1 pull-down
-	<0x20> : TX1 pull-up
-	<0x30> : TX1 push-pull
-
-- nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin.
-	If not specified or if the specified value is 0, the CLKOUT pin
-	will be disabled.
-
-- nxp,no-comparator-bypass : Allows to disable the CAN input comparator.
-
-For further information, please have a look to the SJA1000 data sheet.
-
-Examples:
-
-can@3,100 {
-	compatible = "nxp,sja1000";
-	reg = <3 0x100 0x80>;
-	interrupts = <2 0>;
-	interrupt-parent = <&mpic>;
-	nxp,external-clock-frequency = <16000000>;
-};
-
diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 6bdcc3f84bd3..e3501bfa22e9 100644
--- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -14,7 +14,7 @@ Required properties:
                     the interrupt.
 	- interrupts: interrupt specification for data-ready.
 
-See Documentation/devicetree/bindings/net/can/m_can.txt for additional
+See Documentation/devicetree/bindings/net/can/bosch,m_can.yaml for additional
 required property details.
 
 Optional properties:
@@ -31,9 +31,9 @@ tcan4x5x: tcan4x5x@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <10000000>;
-		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+		bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <14 GPIO_ACTIVE_LOW>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
new file mode 100644
index 000000000000..65af8183cb9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/xilinx,can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Xilinx Axi CAN/Zynq CANPS controller
+
+maintainers:
+  - Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynq-can-1.0
+      - xlnx,axi-can-1.00.a
+      - xlnx,canfd-1.0
+      - xlnx,canfd-2.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  tx-fifo-depth:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: CAN Tx fifo depth (Zynq, Axi CAN).
+
+  rx-fifo-depth:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: CAN Rx fifo depth (Zynq, Axi CAN, CAN FD in sequential Rx mode)
+
+  tx-mailbox-count:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: CAN Tx mailbox buffer count (CAN FD)
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynq-can-1.0
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: pclk
+      required:
+        - tx-fifo-depth
+        - rx-fifo-depth
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,axi-can-1.00.a
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: s_axi_aclk
+      required:
+        - tx-fifo-depth
+        - rx-fifo-depth
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,canfd-1.0
+              - xlnx,canfd-2.0
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: s_axi_aclk
+      required:
+        - tx-mailbox-count
+        - rx-fifo-depth
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    can@e0008000 {
+        compatible = "xlnx,zynq-can-1.0";
+        reg = <0xe0008000 0x1000>;
+        clocks = <&clkc 19>, <&clkc 36>;
+        clock-names = "can_clk", "pclk";
+        interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&intc>;
+        tx-fifo-depth = <0x40>;
+        rx-fifo-depth = <0x40>;
+    };
+
+  - |
+    can@40000000 {
+        compatible = "xlnx,axi-can-1.00.a";
+        reg = <0x40000000 0x10000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-fifo-depth = <0x40>;
+        rx-fifo-depth = <0x40>;
+    };
+
+  - |
+    can@40000000 {
+        compatible = "xlnx,canfd-1.0";
+        reg = <0x40000000 0x2000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-mailbox-count = <0x20>;
+        rx-fifo-depth = <0x20>;
+    };
+
+  - |
+    can@ff060000 {
+        compatible = "xlnx,canfd-2.0";
+        reg = <0xff060000 0x6000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-mailbox-count = <0x20>;
+        rx-fifo-depth = <0x40>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/Documentation/devicetree/bindings/net/can/xilinx_can.txt
deleted file mode 100644
index 100cc40b8510..000000000000
--- a/Documentation/devicetree/bindings/net/can/xilinx_can.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings
----------------------------------------------------------
-
-Required properties:
-- compatible		: Should be:
-			  - "xlnx,zynq-can-1.0" for Zynq CAN controllers
-			  - "xlnx,axi-can-1.00.a" for Axi CAN controllers
-			  - "xlnx,canfd-1.0" for CAN FD controllers
-			  - "xlnx,canfd-2.0" for CAN FD 2.0 controllers
-- reg			: Physical base address and size of the controller
-			  registers map.
-- interrupts		: Property with a value describing the interrupt
-			  number.
-- clock-names		: List of input clock names
-			  - "can_clk", "pclk" (For CANPS),
-			  - "can_clk", "s_axi_aclk" (For AXI CAN and CAN FD).
-			  (See clock bindings for details).
-- clocks		: Clock phandles (see clock bindings for details).
-- tx-fifo-depth		: Can Tx fifo depth (Zynq, Axi CAN).
-- rx-fifo-depth		: Can Rx fifo depth (Zynq, Axi CAN, CAN FD in
-                          sequential Rx mode).
-- tx-mailbox-count	: Can Tx mailbox buffer count (CAN FD).
-- rx-mailbox-count	: Can Rx mailbox buffer count (CAN FD in mailbox Rx
-			  mode).
-
-
-Example:
-
-For Zynq CANPS Dts file:
-	zynq_can_0: can@e0008000 {
-			compatible = "xlnx,zynq-can-1.0";
-			clocks = <&clkc 19>, <&clkc 36>;
-			clock-names = "can_clk", "pclk";
-			reg = <0xe0008000 0x1000>;
-			interrupts = <0 28 4>;
-			interrupt-parent = <&intc>;
-			tx-fifo-depth = <0x40>;
-			rx-fifo-depth = <0x40>;
-		};
-For Axi CAN Dts file:
-	axi_can_0: axi-can@40000000 {
-			compatible = "xlnx,axi-can-1.00.a";
-			clocks = <&clkc 0>, <&clkc 1>;
-			clock-names = "can_clk","s_axi_aclk" ;
-			reg = <0x40000000 0x10000>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 59 1>;
-			tx-fifo-depth = <0x40>;
-			rx-fifo-depth = <0x40>;
-		};
-For CAN FD Dts file:
-	canfd_0: canfd@40000000 {
-			compatible = "xlnx,canfd-1.0";
-			clocks = <&clkc 0>, <&clkc 1>;
-			clock-names = "can_clk", "s_axi_aclk";
-			reg = <0x40000000 0x2000>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 59 1>;
-			tx-mailbox-count = <0x20>;
-			rx-fifo-depth = <0x20>;
-		};
diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
new file mode 100644
index 000000000000..318f4efe7f6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/cdns,macb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MACB/GEM Ethernet controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - cdns,at91rm9200-emac  # Atmel at91rm9200 SoC
+          - const: cdns,emac          # Generic
+
+      - items:
+          - enum:
+              - cdns,zynq-gem         # Xilinx Zynq-7xxx SoC
+              - cdns,zynqmp-gem       # Xilinx Zynq Ultrascale+ MPSoC
+          - const: cdns,gem           # Generic
+        deprecated: true
+
+      - items:
+          - enum:
+              - xlnx,versal-gem       # Xilinx Versal
+              - xlnx,zynq-gem         # Xilinx Zynq-7xxx SoC
+              - xlnx,zynqmp-gem       # Xilinx Zynq Ultrascale+ MPSoC
+          - const: cdns,gem           # Generic
+
+      - items:
+          - enum:
+              - cdns,at91sam9260-macb # Atmel at91sam9 SoCs
+              - cdns,sam9x60-macb     # Microchip sam9x60 SoC
+              - microchip,mpfs-macb   # Microchip PolarFire SoC
+          - const: cdns,macb          # Generic
+
+      - items:
+          - enum:
+              - atmel,sama5d3-macb    # 10/100Mbit IP on Atmel sama5d3 SoCs
+          - enum:
+              - cdns,at91sam9260-macb # Atmel at91sam9 SoCs.
+          - const: cdns,macb          # Generic
+
+      - enum:
+          - atmel,sama5d29-gem        # GEM XL IP (10/100) on Atmel sama5d29 SoCs
+          - atmel,sama5d2-gem         # GEM IP (10/100) on Atmel sama5d2 SoCs
+          - atmel,sama5d3-gem         # Gigabit IP on Atmel sama5d3 SoCs
+          - atmel,sama5d4-gem         # GEM IP (10/100) on Atmel sama5d4 SoCs
+          - cdns,np4-macb             # NP4 SoC devices
+          - microchip,sama7g5-emac    # Microchip SAMA7G5 ethernet interface
+          - microchip,sama7g5-gem     # Microchip SAMA7G5 gigabit ethernet interface
+          - sifive,fu540-c000-gem     # SiFive FU540-C000 SoC
+          - cdns,emac                 # Generic
+          - cdns,gem                  # Generic
+          - cdns,macb                 # Generic
+
+  reg:
+    minItems: 1
+    items:
+      - description: Basic register set
+      - description: GEMGXL Management block registers on SiFive FU540-C000 SoC
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description: One interrupt per available hardware queue
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    items:
+      - enum: [ ether_clk, hclk, pclk ]
+      - enum: [ hclk, pclk ]
+      - const: tx_clk
+      - enum: [ rx_clk, tsu_clk ]
+      - const: tsu_clk
+
+  local-mac-address: true
+
+  phy-mode: true
+
+  phy-handle: true
+
+  phys:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+    description:
+      Recommended with ZynqMP, specify reset control for this
+      controller instance with zynqmp-reset driver.
+
+  reset-names:
+    maxItems: 1
+
+  fixed-link: true
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  mdio:
+    type: object
+    description:
+      Node containing PHY children. If this node is not present, then PHYs will
+      be direct children.
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+
+    properties:
+      reset-gpios: true
+
+      magic-packet:
+        type: boolean
+        description:
+          Indicates that the hardware supports waking up via magic packet.
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phy-mode
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: sifive,fu540-c000-gem
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    macb0: ethernet@fffc4000 {
+            compatible = "cdns,macb";
+            reg = <0xfffc4000 0x4000>;
+            interrupts = <21>;
+            phy-mode = "rmii";
+            local-mac-address = [3a 0e 03 04 05 06];
+            clock-names = "pclk", "hclk", "tx_clk";
+            clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@1 {
+                    reg = <0x1>;
+                    reset-gpios = <&pioE 6 1>;
+            };
+    };
+
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/phy/phy.h>
+
+    bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            gem1: ethernet@ff0c0000 {
+                    compatible = "xlnx,zynqmp-gem", "cdns,gem";
+                    interrupt-parent = <&gic>;
+                    interrupts = <0 59 4>, <0 59 4>;
+                    reg = <0x0 0xff0c0000 0x0 0x1000>;
+                    clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+                             <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+                             <&zynqmp_clk GEM_TSU>;
+                    clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    iommus = <&smmu 0x875>;
+                    power-domains = <&zynqmp_firmware PD_ETH_1>;
+                    resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
+                    reset-names = "gem1_rst";
+                    status = "okay";
+                    phy-mode = "sgmii";
+                    phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>;
+                    fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
deleted file mode 100644
index 6c559981d110..000000000000
--- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Cortina Systems Gemini Ethernet Controller
-==========================================
-
-This ethernet controller is found in the Gemini SoC family:
-StorLink SL3512 and SL3516, also known as Cortina Systems
-CS3512 and CS3516.
-
-Required properties:
-- compatible: must be "cortina,gemini-ethernet"
-- reg: must contain the global registers and the V-bit and A-bit
-  memory areas, in total three register sets.
-- syscon: a phandle to the system controller
-- #address-cells: must be specified, must be <1>
-- #size-cells: must be specified, must be <1>
-- ranges: should be state like this giving a 1:1 address translation
-  for the subnodes
-
-The subnodes represents the two ethernet ports in this device.
-They are not independent of each other since they share resources
-in the parent node, and are thus children.
-
-Required subnodes:
-- port0: contains the resources for ethernet port 0
-- port1: contains the resources for ethernet port 1
-
-Required subnode properties:
-- compatible: must be "cortina,gemini-ethernet-port"
-- reg: must contain two register areas: the DMA/TOE memory and
-  the GMAC memory area of the port
-- interrupts: should contain the interrupt line of the port.
-  this is nominally a level interrupt active high.
-- resets: this must provide an SoC-integrated reset line for
-  the port.
-- clocks: this should contain a handle to the PCLK clock for
-  clocking the silicon in this port
-- clock-names: must be "PCLK"
-
-Optional subnode properties:
-- phy-mode: see ethernet.txt
-- phy-handle: see ethernet.txt
-
-Example:
-
-mdio-bus {
-	(...)
-	phy0: ethernet-phy@1 {
-		reg = <1>;
-		device_type = "ethernet-phy";
-	};
-	phy1: ethernet-phy@3 {
-		reg = <3>;
-		device_type = "ethernet-phy";
-	};
-};
-
-
-ethernet@60000000 {
-	compatible = "cortina,gemini-ethernet";
-	reg = <0x60000000 0x4000>, /* Global registers, queue */
-	      <0x60004000 0x2000>, /* V-bit */
-	      <0x60006000 0x2000>; /* A-bit */
-	syscon = <&syscon>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	gmac0: ethernet-port@0 {
-		compatible = "cortina,gemini-ethernet-port";
-		reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
-		      <0x6000a000 0x2000>; /* Port 0 GMAC */
-		interrupt-parent = <&intcon>;
-		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-		resets = <&syscon GEMINI_RESET_GMAC0>;
-		clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
-		clock-names = "PCLK";
-		phy-mode = "rgmii";
-		phy-handle = <&phy0>;
-	};
-
-	gmac1: ethernet-port@1 {
-		compatible = "cortina,gemini-ethernet-port";
-		reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
-		      <0x6000e000 0x2000>; /* Port 1 GMAC */
-		interrupt-parent = <&intcon>;
-		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-		resets = <&syscon GEMINI_RESET_GMAC1>;
-		clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
-		clock-names = "PCLK";
-		phy-mode = "rgmii";
-		phy-handle = <&phy1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
new file mode 100644
index 000000000000..253b5d1407ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/cortina,gemini-ethernet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortina Systems Gemini Ethernet Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This ethernet controller is found in the Gemini SoC family:
+  StorLink SL3512 and SL3516, also known as Cortina Systems
+  CS3512 and CS3516.
+
+properties:
+  compatible:
+    const: cortina,gemini-ethernet
+
+  reg:
+    minItems: 3
+    description: must contain the global registers and the V-bit and A-bit
+      memory areas, in total three register sets.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+#The subnodes represents the two ethernet ports in this device.
+#They are not independent of each other since they share resources
+#in the parent node, and are thus children.
+patternProperties:
+  "^ethernet-port@[0-9]+$":
+    type: object
+    unevaluatedProperties: false
+    description: contains the resources for ethernet port
+    allOf:
+      - $ref: ethernet-controller.yaml#
+    properties:
+      compatible:
+        const: cortina,gemini-ethernet-port
+
+      reg:
+        items:
+          - description: DMA/TOE memory
+          - description: GMAC memory area of the port
+
+      interrupts:
+        maxItems: 1
+        description: should contain the interrupt line of the port.
+                     this is nominally a level interrupt active high.
+
+      resets:
+        maxItems: 1
+        description: this must provide an SoC-integrated reset line for the port.
+
+      clocks:
+        maxItems: 1
+        description: this should contain a handle to the PCLK clock for
+                     clocking the silicon in this port
+
+      clock-names:
+        const: PCLK
+
+    required:
+      - reg
+      - compatible
+      - interrupts
+      - resets
+      - clocks
+      - clock-names
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+    mdio0: mdio {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      phy0: ethernet-phy@1 {
+        reg = <1>;
+        device_type = "ethernet-phy";
+      };
+      phy1: ethernet-phy@3 {
+        reg = <3>;
+        device_type = "ethernet-phy";
+      };
+    };
+
+
+    ethernet@60000000 {
+        compatible = "cortina,gemini-ethernet";
+        reg = <0x60000000 0x4000>, /* Global registers, queue */
+              <0x60004000 0x2000>, /* V-bit */
+              <0x60006000 0x2000>; /* A-bit */
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        gmac0: ethernet-port@0 {
+                compatible = "cortina,gemini-ethernet-port";
+                reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+                      <0x6000a000 0x2000>; /* Port 0 GMAC */
+                interrupt-parent = <&intcon>;
+                interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+                resets = <&syscon GEMINI_RESET_GMAC0>;
+                clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+                clock-names = "PCLK";
+                phy-mode = "rgmii";
+                phy-handle = <&phy0>;
+        };
+
+        gmac1: ethernet-port@1 {
+                compatible = "cortina,gemini-ethernet-port";
+                reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+                      <0x6000e000 0x2000>; /* Port 1 GMAC */
+                interrupt-parent = <&intcon>;
+                interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+                resets = <&syscon GEMINI_RESET_GMAC1>;
+                clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+                clock-names = "PCLK";
+                phy-mode = "rgmii";
+                phy-handle = <&phy1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 7c7ac5eb0313..ef655f386b2e 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -20,7 +20,7 @@ Required properties:
 - active_slave		: Specifies the slave to use for time stamping,
 			  ethtool and SIOCGMIIPHY
 - cpsw-phy-sel		: Specifies the phandle to the CPSW phy mode selection
-			  device. See also cpsw-phy-sel.txt for it's binding.
+			  device. See also cpsw-phy-sel.txt for its binding.
 			  Note that in legacy cases cpsw-phy-sel may be
 			  a child device instead of a phandle
 			  (DEPRECATED, use phys property instead).
diff --git a/Documentation/devicetree/bindings/net/davicom,dm9051.yaml b/Documentation/devicetree/bindings/net/davicom,dm9051.yaml
new file mode 100644
index 000000000000..52e852fef753
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/davicom,dm9051.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/davicom,dm9051.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Davicom DM9051 SPI Ethernet Controller
+
+maintainers:
+  - Joseph CHANG <josright123@gmail.com>
+
+description: |
+  The DM9051 is a fully integrated and cost-effective low pin count single
+  chip Fast Ethernet controller with a Serial Peripheral Interface (SPI).
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: davicom,dm9051
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 45000000
+
+  interrupts:
+    maxItems: 1
+
+  local-mac-address: true
+
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  # Raspberry Pi platform
+  - |
+    /* for Raspberry Pi with pin control stuff for GPIO irq */
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "davicom,dm9051";
+            reg = <0>; /* spi chip select */
+            local-mac-address = [00 00 00 00 00 00];
+            interrupt-parent = <&gpio>;
+            interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+            spi-max-frequency = <31200000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
index 320607cbbb17..f824fdae0da2 100644
--- a/Documentation/devicetree/bindings/net/dsa/ar9331.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
@@ -76,7 +76,6 @@ eth1: ethernet@1a000000 {
 
 				switch_port0: port@0 {
 					reg = <0x0>;
-					label = "cpu";
 					ethernet = <&eth1>;
 
 					phy-mode = "gmii";
diff --git a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
new file mode 100644
index 000000000000..259a0c6547f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/arrow,xrs700x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arrow SpeedChips XRS7000 Series Switch Device Tree Bindings
+
+allOf:
+  - $ref: dsa.yaml#
+
+maintainers:
+  - George McCollister <george.mccollister@gmail.com>
+
+description:
+  The Arrow SpeedChips XRS7000 Series of single chip gigabit Ethernet switches
+  are designed for critical networking applications. They have up to three
+  RGMII ports and one RMII port and are managed via i2c or mdio.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - arrow,xrs7003e
+          - arrow,xrs7003f
+          - arrow,xrs7004e
+          - arrow,xrs7004f
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        switch@8 {
+            compatible = "arrow,xrs7004e";
+            reg = <0x8>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                ethernet-port@1 {
+                    reg = <1>;
+                    label = "lan0";
+                    phy-handle = <&swphy0>;
+                    phy-mode = "rgmii-id";
+                };
+                ethernet-port@2 {
+                    reg = <2>;
+                    label = "lan1";
+                    phy-handle = <&swphy1>;
+                    phy-mode = "rgmii-id";
+                };
+                ethernet-port@3 {
+                    reg = <3>;
+                    ethernet = <&fec1>;
+                    phy-mode = "rgmii-id";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt
deleted file mode 100644
index 5201bc15fdd6..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/b53.txt
+++ /dev/null
@@ -1,145 +0,0 @@
-Broadcom BCM53xx Ethernet switches
-==================================
-
-Required properties:
-
-- compatible: For external switch chips, compatible string must be exactly one
-  of: "brcm,bcm5325"
-      "brcm,bcm53115"
-      "brcm,bcm53125"
-      "brcm,bcm53128"
-      "brcm,bcm5365"
-      "brcm,bcm5395"
-      "brcm,bcm5389"
-      "brcm,bcm5397"
-      "brcm,bcm5398"
-
-  For the BCM11360 SoC, must be:
-      "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string
-
-  For the BCM5310x SoCs with an integrated switch, must be one of:
-      "brcm,bcm53010-srab"
-      "brcm,bcm53011-srab"
-      "brcm,bcm53012-srab"
-      "brcm,bcm53018-srab"
-      "brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
-
-  For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of:
-      "brcm,bcm11404-srab"
-      "brcm,bcm11407-srab"
-      "brcm,bcm11409-srab"
-      "brcm,bcm58310-srab"
-      "brcm,bcm58311-srab"
-      "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string
-
-  For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of:
-      "brcm,bcm58522-srab"
-      "brcm,bcm58523-srab"
-      "brcm,bcm58525-srab"
-      "brcm,bcm58622-srab"
-      "brcm,bcm58623-srab"
-      "brcm,bcm58625-srab"
-      "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string
-
-  For the BCM63xx/33xx SoCs with an integrated switch, must be one of:
-      "brcm,bcm3384-switch"
-      "brcm,bcm6328-switch"
-      "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
-
-Required properties for BCM585xx/586xx/88312 SoCs:
-
- - reg: a total of 3 register base addresses, the first one must be the
-   Switch Register Access block base, the second is the port 5/4 mux
-   configuration register and the third one is the SGMII configuration
-   and status register base address.
-
- - interrupts: a total of 13 interrupts must be specified, in the following
-   order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
-   then the timestamping interrupt and the sleep timer interrupts for ports
-   5,7,8.
-
-Optional properties for BCM585xx/586xx/88312 SoCs:
-
-  - reg-names: a total of 3 names matching the 3 base register address, must
-    be in the following order:
-	"srab"
-	"mux_config"
-	"sgmii_config"
-
-  - interrupt-names: a total of 13 names matching the 13 interrupts specified
-    must be in the following order:
-	"link_state_p0"
-	"link_state_p1"
-	"link_state_p2"
-	"link_state_p3"
-	"link_state_p4"
-	"link_state_p5"
-	"link_state_p7"
-	"link_state_p8"
-	"phy"
-	"ts"
-	"imp_sleep_timer_p5"
-	"imp_sleep_timer_p7"
-	"imp_sleep_timer_p8"
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required and optional properties.
-
-Examples:
-
-Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
-
-	eth0: ethernet@10001000 {
-		compatible = "brcm,unimac";
-		reg = <0x10001000 0x1000>;
-
-		fixed-link {
-			speed = <1000>;
-			duplex-full;
-		};
-	};
-
-	mdio0: mdio@10000000 {
-		compatible = "brcm,unimac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch0: ethernet-switch@30 {
-			compatible = "brcm,bcm53125";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ports {
-				port0@0 {
-					reg = <0>;
-					label = "lan1";
-				};
-
-				port1@1 {
-					reg = <1>;
-					label = "lan2";
-				};
-
-				port5@5 {
-					reg = <5>;
-					label = "cable-modem";
-					fixed-link {
-						speed = <1000>;
-						duplex-full;
-					};
-					phy-mode = "rgmii-txid";
-				};
-
-				port8@8 {
-					reg = <8>;
-					label = "cpu";
-					fixed-link {
-						speed = <1000>;
-						duplex-full;
-					};
-					phy-mode = "rgmii-txid";
-					ethernet = <&eth0>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
new file mode 100644
index 000000000000..1219b830b1a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
@@ -0,0 +1,264 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM53xx Ethernet switches
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description:
+  Broadcom BCM53xx Ethernet switches
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,bcm5325
+      - const: brcm,bcm53115
+      - const: brcm,bcm53125
+      - const: brcm,bcm53128
+      - const: brcm,bcm5365
+      - const: brcm,bcm5395
+      - const: brcm,bcm5389
+      - const: brcm,bcm5397
+      - const: brcm,bcm5398
+      - items:
+          - const: brcm,bcm11360-srab
+          - const: brcm,cygnus-srab
+      - items:
+          - enum:
+              - brcm,bcm53010-srab
+              - brcm,bcm53011-srab
+              - brcm,bcm53012-srab
+              - brcm,bcm53018-srab
+              - brcm,bcm53019-srab
+          - const: brcm,bcm5301x-srab
+      - items:
+          - enum:
+              - brcm,bcm11404-srab
+              - brcm,bcm11407-srab
+              - brcm,bcm11409-srab
+              - brcm,bcm58310-srab
+              - brcm,bcm58311-srab
+              - brcm,bcm58313-srab
+          - const: brcm,omega-srab
+      - items:
+          - enum:
+              - brcm,bcm58522-srab
+              - brcm,bcm58523-srab
+              - brcm,bcm58525-srab
+              - brcm,bcm58622-srab
+              - brcm,bcm58623-srab
+              - brcm,bcm58625-srab
+              - brcm,bcm88312-srab
+          - const: brcm,nsp-srab
+      - items:
+          - enum:
+              - brcm,bcm3384-switch
+              - brcm,bcm6328-switch
+              - brcm,bcm6368-switch
+          - const: brcm,bcm63xx-switch
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dsa.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm5325
+              - brcm,bcm53115
+              - brcm,bcm53125
+              - brcm,bcm53128
+              - brcm,bcm5365
+              - brcm,bcm5395
+              - brcm,bcm5397
+              - brcm,bcm5398
+    then:
+      $ref: /schemas/spi/spi-peripheral-props.yaml
+
+    # BCM585xx/586xx/88312 SoCs
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm58522-srab
+              - brcm,bcm58523-srab
+              - brcm,bcm58525-srab
+              - brcm,bcm58622-srab
+              - brcm,bcm58623-srab
+              - brcm,bcm58625-srab
+              - brcm,bcm88312-srab
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+        reg-names:
+          items:
+            - const: srab
+            - const: mux_config
+            - const: sgmii_config
+        interrupts:
+          minItems: 13
+          maxItems: 13
+        interrupt-names:
+          items:
+            - const: link_state_p0
+            - const: link_state_p1
+            - const: link_state_p2
+            - const: link_state_p3
+            - const: link_state_p4
+            - const: link_state_p5
+            - const: link_state_p7
+            - const: link_state_p8
+            - const: phy
+            - const: ts
+            - const: imp_sleep_timer_p5
+            - const: imp_sleep_timer_p7
+            - const: imp_sleep_timer_p8
+      required:
+        - interrupts
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-switch@1e {
+            compatible = "brcm,bcm53125";
+            reg = <30>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@5 {
+                    reg = <5>;
+                    label = "cable-modem";
+                    phy-mode = "rgmii-txid";
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@8 {
+                    reg = <8>;
+                    phy-mode = "rgmii-txid";
+                    ethernet = <&eth0>;
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    axi {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        switch@36000 {
+            compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
+            reg = <0x36000 0x1000>,
+                  <0x3f308 0x8>,
+                  <0x3f410 0xc>;
+            reg-names = "srab", "mux_config", "sgmii_config";
+            interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "link_state_p0",
+                              "link_state_p1",
+                              "link_state_p2",
+                              "link_state_p3",
+                              "link_state_p4",
+                              "link_state_p5",
+                              "link_state_p7",
+                              "link_state_p8",
+                              "phy",
+                              "ts",
+                              "imp_sleep_timer_p5",
+                              "imp_sleep_timer_p7",
+                              "imp_sleep_timer_p8";
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    label = "port0";
+                    reg = <0>;
+                };
+
+                port@1 {
+                    label = "port1";
+                    reg = <1>;
+                };
+
+                port@2 {
+                    label = "port2";
+                    reg = <2>;
+                };
+
+                port@3 {
+                    label = "port3";
+                    reg = <3>;
+                };
+
+                port@4 {
+                    label = "port4";
+                    reg = <4>;
+                };
+
+                port@8 {
+                    ethernet = <&amac2>;
+                    reg = <8>;
+                    phy-mode = "internal";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml
new file mode 100644
index 000000000000..d159ac78cec1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/brcm,sf2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Starfighter 2 integrated swich
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm4908-switch
+          - brcm,bcm7278-switch-v4.0
+          - brcm,bcm7278-switch-v4.8
+          - brcm,bcm7445-switch-v4.0
+
+  reg:
+    minItems: 6
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: core
+      - const: reg
+      - const: intrl2_0
+      - const: intrl2_1
+      - const: fcb
+      - const: acb
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: switch_0
+      - const: switch_1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: switch
+
+  clocks:
+    minItems: 1
+    items:
+      - description: switch's main clock
+      - description: dividing of the switch core clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sw_switch
+      - const: sw_switch_mdiv
+
+  brcm,num-gphy:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum number of integrated gigabit PHYs in the switch
+
+  brcm,num-rgmii-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum number of RGMII interfaces supported by the switch
+
+  brcm,fcb-pause-override:
+    description: if present indicates that the switch supports Failover Control
+      Block pause override capability
+    type: boolean
+
+  brcm,acb-packets-inflight:
+    description: if present indicates that the switch Admission Control Block
+      supports reporting the number of packets in-flight in a switch queue
+    type: boolean
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  ports:
+    type: object
+
+    properties:
+      brcm,use-bcm-hdr:
+        description: if present, indicates that the switch port has Broadcom
+          tags enabled (per-packet metadata)
+        type: boolean
+
+required:
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - $ref: "dsa.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm7278-switch-v4.0
+              - brcm,bcm7278-switch-v4.8
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          minItems: 1
+          maxItems: 1
+      required:
+        - clocks
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7445-switch-v4.0
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          minItems: 2
+          maxItems: 2
+      required:
+        - clocks
+        - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    switch@f0b00000 {
+            compatible = "brcm,bcm7445-switch-v4.0";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0xf0b00000 0x40000>,
+                  <0xf0b40000 0x110>,
+                  <0xf0b40340 0x30>,
+                  <0xf0b40380 0x30>,
+                  <0xf0b40400 0x34>,
+                  <0xf0b40600 0x208>;
+            reg-names = "core", "reg", "intrl2_0", "intrl2_1",
+                        "fcb", "acb";
+            interrupts = <0 0x18 0>,
+                         <0 0x19 0>;
+            clocks = <&sw_switch>, <&sw_switch_mdiv>;
+            clock-names = "sw_switch", "sw_switch_mdiv";
+            brcm,num-gphy = <1>;
+            brcm,num-rgmii-ports = <2>;
+            brcm,fcb-pause-override;
+            brcm,acb-packets-inflight;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                            label = "gphy";
+                            reg = <0>;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
new file mode 100644
index 000000000000..10ad7e71097b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet Switch port Device Tree Bindings
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vivien Didelot <vivien.didelot@gmail.com>
+
+description:
+  Ethernet switch port Description
+
+allOf:
+  - $ref: /schemas/net/ethernet-controller.yaml#
+
+properties:
+  reg:
+    description: Port number
+
+  label:
+    description:
+      Describes the label associated with this port, which will become
+      the netdev name
+    $ref: /schemas/types.yaml#/definitions/string
+
+  link:
+    description:
+      Should be a list of phandles to other switch's DSA port. This
+      port is used as the outgoing port towards the phandle ports. The
+      full routing information must be given, not just the one hop
+      routes to neighbouring switches
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+
+  ethernet:
+    description:
+      Should be a phandle to a valid Ethernet device node.  This host
+      device is what the switch port is connected to
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  dsa-tag-protocol:
+    description:
+      Instead of the default, the switch will use this tag protocol if
+      possible. Useful when a device supports multiple protocols and
+      the default is incompatible with the Ethernet device.
+    enum:
+      - dsa
+      - edsa
+      - ocelot
+      - ocelot-8021q
+      - rtl8_4
+      - rtl8_4t
+      - seville
+
+  phy-handle: true
+
+  phy-mode: true
+
+  fixed-link: true
+
+  mac-address: true
+
+  sfp: true
+
+  managed: true
+
+  rx-internal-delay-ps: true
+
+  tx-internal-delay-ps: true
+
+required:
+  - reg
+
+# CPU and DSA ports must have phylink-compatible link descriptions
+if:
+  oneOf:
+    - required: [ ethernet ]
+    - required: [ link ]
+then:
+  allOf:
+    - required:
+        - phy-mode
+    - oneOf:
+        - required:
+            - fixed-link
+        - required:
+            - phy-handle
+        - required:
+            - managed
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index f66bb7ecdb82..dab208b5c7c7 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -1,257 +1,4 @@
 Distributed Switch Architecture Device Tree Bindings
 ----------------------------------------------------
 
-Switches are true Linux devices and can be probed by any means. Once
-probed, they register to the DSA framework, passing a node
-pointer. This node is expected to fulfil the following binding, and
-may contain additional properties as required by the device it is
-embedded within.
-
-Required properties:
-
-- ports		: A container for child nodes representing switch ports.
-
-Optional properties:
-
-- dsa,member	: A two element list indicates which DSA cluster, and position
-		  within the cluster a switch takes. <0 0> is cluster 0,
-		  switch 0. <0 1> is cluster 0, switch 1. <1 0> is cluster 1,
-		  switch 0. A switch not part of any cluster (single device
-		  hanging off a CPU port) must not specify this property
-
-The ports container has the following properties
-
-Required properties:
-
-- #address-cells	: Must be 1
-- #size-cells		: Must be 0
-
-Each port children node must have the following mandatory properties:
-- reg			: Describes the port address in the switch
-
-An uplink/downlink port between switches in the cluster has the following
-mandatory property:
-
-- link			: Should be a list of phandles to other switch's DSA
-			  port. This port is used as the outgoing port
-			  towards the phandle ports. The full routing
-			  information must be given, not just the one hop
-			  routes to neighbouring switches.
-
-A CPU port has the following mandatory property:
-
-- ethernet		: Should be a phandle to a valid Ethernet device node.
-                          This host device is what the switch port is
-			  connected to.
-
-A user port has the following optional property:
-
-- label			: Describes the label associated with this port, which
-                          will become the netdev name.
-
-Port child nodes may also contain the following optional standardised
-properties, described in binding documents:
-
-- phy-handle		: Phandle to a PHY on an MDIO bus. See
-			  Documentation/devicetree/bindings/net/ethernet.txt
-			  for details.
-
-- phy-mode		: See
-			  Documentation/devicetree/bindings/net/ethernet.txt
-			  for details.
-
-- fixed-link		: Fixed-link subnode describing a link to a non-MDIO
-			  managed entity. See
-			  Documentation/devicetree/bindings/net/fixed-link.txt
-			  for details.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Example
-
-The following example shows three switches on three MDIO busses,
-linked into one DSA cluster.
-
-&mdio1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	switch0: switch0@0 {
-		compatible = "marvell,mv88e6085";
-		reg = <0>;
-
-		dsa,member = <0 0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				label = "lan0";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan1";
-				local-mac-address = [00 00 00 00 00 00];
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			switch0port5: port@5 {
-				reg = <5>;
-				phy-mode = "rgmii-txid";
-				link = <&switch1port6
-					&switch2port9>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			port@6 {
-				reg = <6>;
-				ethernet = <&fec1>;
-				fixed-link {
-					speed = <100>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&mdio2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	switch1: switch1@0 {
-		compatible = "marvell,mv88e6085";
-		reg = <0>;
-
-		dsa,member = <0 1>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				label = "lan3";
-				phy-handle = <&switch1phy0>;
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan4";
-				phy-handle = <&switch1phy1>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan5";
-				phy-handle = <&switch1phy2>;
-			};
-
-			switch1port5: port@5 {
-				reg = <5>;
-				link = <&switch2port9>;
-				phy-mode = "rgmii-txid";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			switch1port6: port@6 {
-				reg = <6>;
-				phy-mode = "rgmii-txid";
-				link = <&switch0port5>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-		mdio-bus {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			switch1phy0: switch1phy0@0 {
-				reg = <0>;
-			};
-			switch1phy1: switch1phy0@1 {
-				reg = <1>;
-			};
-			switch1phy2: switch1phy0@2 {
-				reg = <2>;
-			};
-		};
-	 };
-};
-
-&mdio4 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	switch2: switch2@0 {
-		compatible = "marvell,mv88e6085";
-		reg = <0>;
-
-		dsa,member = <0 2>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				label = "lan6";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan7";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan8";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "optical3";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-					link-gpios = <&gpio6 2
-					      GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "optical4";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-					link-gpios = <&gpio6 3
-					      GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			switch2port9: port@9 {
-				reg = <9>;
-				phy-mode = "rgmii-txid";
-				link = <&switch1port5
-					&switch0port5>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
+See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation.
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
new file mode 100644
index 000000000000..b9d48e357e77
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/dsa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet Switch Device Tree Bindings
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vivien Didelot <vivien.didelot@gmail.com>
+
+description:
+  This binding represents Ethernet Switches which have a dedicated CPU
+  port. That port is usually connected to an Ethernet Controller of the
+  SoC. Such setups are typical for embedded devices.
+
+select: false
+
+properties:
+  $nodename:
+    pattern: "^(ethernet-)?switch(@.*)?$"
+
+  dsa,member:
+    minItems: 2
+    maxItems: 2
+    description:
+      A two element list indicates which DSA cluster, and position within the
+      cluster a switch takes. <0 0> is cluster 0, switch 0. <0 1> is cluster 0,
+      switch 1. <1 0> is cluster 1, switch 0. A switch not part of any cluster
+      (single device hanging off a CPU port) must not specify this property
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        type: object
+        description: Ethernet switch ports
+
+        $ref: dsa-port.yaml#
+
+        unevaluatedProperties: false
+
+oneOf:
+  - required:
+      - ports
+  - required:
+      - ethernet-ports
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
new file mode 100644
index 000000000000..73b774eadd0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/hirschmann,hellcreek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hirschmann Hellcreek TSN Switch Device Tree Bindings
+
+allOf:
+  - $ref: dsa.yaml#
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vivien Didelot <vivien.didelot@gmail.com>
+  - Kurt Kanzenbach <kurt@linutronix.de>
+
+description:
+  The Hellcreek TSN Switch IP is a 802.1Q Ethernet compliant switch. It supports
+  the Precision Time Protocol, Hardware Timestamping as well the Time Aware
+  Shaper.
+
+properties:
+  compatible:
+    items:
+      - const: hirschmann,hellcreek-de1soc-r1
+
+  reg:
+    description:
+      The physical base address and size of TSN and PTP memory base
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: tsn
+      - const: ptp
+
+  leds:
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^led@[01]$":
+        type: object
+        description: Hellcreek leds
+        $ref: /schemas/leds/common.yaml#
+
+        properties:
+          reg:
+            items:
+              - enum: [0, 1]
+            description: Led number
+
+          label: true
+
+          default-state: true
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ethernet-ports
+  - leds
+
+unevaluatedProperties: false
+
+examples:
+  - |
+        switch0: switch@ff240000 {
+            compatible = "hirschmann,hellcreek-de1soc-r1";
+            reg = <0xff240000 0x1000>,
+                  <0xff250000 0x1000>;
+            reg-names = "tsn", "ptp";
+            dsa,member = <0 0>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "mii";
+
+                    fixed-link {
+                        speed = <100>;
+                        full-duplex;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan0";
+                    phy-handle = <&phy1>;
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan1";
+                    phy-handle = <&phy2>;
+                };
+            };
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    label = "sync_good";
+                    default-state = "on";
+                };
+
+                led@1 {
+                    reg = <1>;
+                    label = "is_gm";
+                    default-state = "off";
+                };
+            };
+        };
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
deleted file mode 100644
index 95e91e84151c..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ /dev/null
@@ -1,125 +0,0 @@
-Microchip KSZ Series Ethernet switches
-==================================
-
-Required properties:
-
-- compatible: For external switch chips, compatible string must be exactly one
-  of the following:
-  - "microchip,ksz8765"
-  - "microchip,ksz8794"
-  - "microchip,ksz8795"
-  - "microchip,ksz9477"
-  - "microchip,ksz9897"
-  - "microchip,ksz9896"
-  - "microchip,ksz9567"
-  - "microchip,ksz8565"
-  - "microchip,ksz9893"
-  - "microchip,ksz9563"
-  - "microchip,ksz8563"
-
-Optional properties:
-
-- reset-gpios		: Should be a gpio specifier for a reset line
-- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to
-			  125MHz instead of 25MHz.
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required and optional properties.
-
-Examples:
-
-Ethernet switch connected via SPI to the host, CPU port wired to eth0:
-
-	eth0: ethernet@10001000 {
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-		};
-	};
-
-	spi1: spi@f8008000 {
-		pinctrl-0 = <&pinctrl_spi_ksz>;
-		cs-gpios = <&pioC 25 0>;
-		id = <1>;
-
-		ksz9477: ksz9477@0 {
-			compatible = "microchip,ksz9477";
-			reg = <0>;
-
-			spi-max-frequency = <44000000>;
-			spi-cpha;
-			spi-cpol;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					label = "lan1";
-				};
-				port@1 {
-					reg = <1>;
-					label = "lan2";
-				};
-				port@2 {
-					reg = <2>;
-					label = "lan3";
-				};
-				port@3 {
-					reg = <3>;
-					label = "lan4";
-				};
-				port@4 {
-					reg = <4>;
-					label = "lan5";
-				};
-				port@5 {
-					reg = <5>;
-					label = "cpu";
-					ethernet = <&eth0>;
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-		ksz8565: ksz8565@0 {
-			compatible = "microchip,ksz8565";
-			reg = <0>;
-
-			spi-max-frequency = <44000000>;
-			spi-cpha;
-			spi-cpol;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					label = "lan1";
-				};
-				port@1 {
-					reg = <1>;
-					label = "lan2";
-				};
-				port@2 {
-					reg = <2>;
-					label = "lan3";
-				};
-				port@3 {
-					reg = <3>;
-					label = "lan4";
-				};
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&eth0>;
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
index 464d6bf87605..46a732087f5c 100644
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
@@ -46,7 +46,6 @@ I2C managed mode:
 
 			port@0 { /* RMII fixed link to master */
 				reg = <0>;
-				label = "cpu";
 				ethernet = <&master>;
 			};
 
@@ -83,7 +82,6 @@ MDIO managed mode:
 
 					port@0 {
 						reg = <0>;
-						label = "cpu";
 						ethernet = <&master>;
 					};
 
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
index 886cbe8ffb38..8bb1eff21cb1 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
@@ -5,6 +5,10 @@ Required properties for GSWIP core:
 
 - compatible	: "lantiq,xrx200-gswip" for the embedded GSWIP in the
 		  xRX200 SoC
+		  "lantiq,xrx300-gswip" for the embedded GSWIP in the
+		  xRX300 SoC
+		  "lantiq,xrx330-gswip" for the embedded GSWIP in the
+		  xRX330 SoC
 - reg		: memory range of the GSWIP core registers
 		: memory range of the GSWIP MDIO registers
 		: memory range of the GSWIP MII registers
@@ -92,7 +96,6 @@ switch@e108000 {
 
 		port@6 {
 			reg = <0x6>;
-			label = "cpu";
 			ethernet = <&eth0>;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt
index 30c11fea491b..2363b412410c 100644
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -83,7 +83,7 @@ Example:
 		#interrupt-cells = <2>;
 
 		switch0: switch@0 {
-			compatible = "marvell,mv88e6390";
+			compatible = "marvell,mv88e6190";
 			reg = <0>;
 			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
 
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
new file mode 100644
index 000000000000..f2e9ff3f580b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -0,0 +1,804 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7530 and MT7531 Ethernet Switches
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Landen Chao <Landen.Chao@mediatek.com>
+  - DENG Qingfang <dqfext@gmail.com>
+  - Sean Wang <sean.wang@mediatek.com>
+
+description: |
+  There are two versions of MT7530, standalone and in a multi-chip module.
+
+  MT7530 is a part of the multi-chip module in MT7620AN, MT7620DA, MT7620DAN,
+  MT7620NN, MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs.
+
+  MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs
+  and the switch registers are directly mapped into SoC's memory map rather than
+  using MDIO. The DSA driver currently doesn't support this.
+
+  There is only the standalone version of MT7531.
+
+  Port 5 on MT7530 has got various ways of configuration.
+
+  For standalone MT7530:
+
+    - Port 5 can be used as a CPU port.
+
+    - PHY 0 or 4 of the switch can be muxed to connect to the gmac of the SoC
+      which port 5 is wired to. Usually used for connecting the wan port
+      directly to the CPU to achieve 2 Gbps routing in total.
+
+      The driver looks up the reg on the ethernet-phy node which the phy-handle
+      property refers to on the gmac node to mux the specified phy.
+
+      The driver requires the gmac of the SoC to have "mediatek,eth-mac" as the
+      compatible string and the reg must be 1. So, for now, only gmac1 of an
+      MediaTek SoC can benefit this. Banana Pi BPI-R2 suits this.
+      Check out example 5 for a similar configuration.
+
+    - Port 5 can be wired to an external phy. Port 5 becomes a DSA slave.
+      Check out example 7 for a similar configuration.
+
+  For multi-chip module MT7530:
+
+    - Port 5 can be used as a CPU port.
+
+    - PHY 0 or 4 of the switch can be muxed to connect to gmac1 of the SoC.
+      Usually used for connecting the wan port directly to the CPU to achieve 2
+      Gbps routing in total.
+
+      The driver looks up the reg on the ethernet-phy node which the phy-handle
+      property refers to on the gmac node to mux the specified phy.
+
+      For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function.
+      Check out example 5.
+
+    - In case of an external phy wired to gmac1 of the SoC, port 5 must not be
+      enabled.
+
+      In case of muxing PHY 0 or 4, the external phy must not be enabled.
+
+      For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function.
+      Check out example 6.
+
+    - Port 5 can be muxed to an external phy. Port 5 becomes a DSA slave.
+      The external phy must be wired TX to TX to gmac1 of the SoC for this to
+      work. Ubiquiti EdgeRouter X SFP is wired this way.
+
+      Muxing PHY 0 or 4 won't work when the external phy is connected TX to TX.
+
+      For the MT7621 SoCs, rgmii2 group must be claimed with gpio function.
+      Check out example 7.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Standalone MT7530 and multi-chip module MT7530 in MT7623AI SoC
+        const: mediatek,mt7530
+
+      - description:
+          Standalone MT7531
+        const: mediatek,mt7531
+
+      - description:
+          Multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
+        const: mediatek,mt7621
+
+  reg:
+    maxItems: 1
+
+  core-supply:
+    description:
+      Phandle to the regulator node necessary for the core power.
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller:
+    type: boolean
+    description:
+      If defined, LED controller of the MT7530 switch will run on GPIO mode.
+
+      There are 15 controllable pins.
+      port 0 LED 0..2 as GPIO 0..2
+      port 1 LED 0..2 as GPIO 3..5
+      port 2 LED 0..2 as GPIO 6..8
+      port 3 LED 0..2 as GPIO 9..11
+      port 4 LED 0..2 as GPIO 12..14
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  io-supply:
+    description:
+      Phandle to the regulator node necessary for the I/O power.
+      See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for
+      details for the regulator setup on these boards.
+
+  mediatek,mcm:
+    type: boolean
+    description:
+      Used for MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs which the MT7530
+      switch is a part of the multi-chip module.
+
+  reset-gpios:
+    description:
+      GPIO to reset the switch. Use this if mediatek,mcm is not used.
+      This property is optional because some boards share the reset line with
+      other components which makes it impossible to probe the switch if the
+      reset line is used.
+    maxItems: 1
+
+  reset-names:
+    const: mcm
+
+  resets:
+    description:
+      Phandle pointing to the system reset controller with line index for the
+      ethsys.
+    maxItems: 1
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    type: object
+
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        type: object
+        description: Ethernet switch ports
+
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            description:
+              Port address described must be 5 or 6 for CPU port and from 0 to 5
+              for user ports.
+
+        allOf:
+          - $ref: dsa-port.yaml#
+          - if:
+              required: [ ethernet ]
+            then:
+              properties:
+                reg:
+                  enum:
+                    - 5
+                    - 6
+
+required:
+  - compatible
+  - reg
+
+$defs:
+  mt7530-dsa-port:
+    patternProperties:
+      "^(ethernet-)?ports$":
+        patternProperties:
+          "^(ethernet-)?port@[0-9]+$":
+            if:
+              required: [ ethernet ]
+            then:
+              if:
+                properties:
+                  reg:
+                    const: 5
+              then:
+                properties:
+                  phy-mode:
+                    enum:
+                      - gmii
+                      - mii
+                      - rgmii
+              else:
+                properties:
+                  phy-mode:
+                    enum:
+                      - rgmii
+                      - trgmii
+
+  mt7531-dsa-port:
+    patternProperties:
+      "^(ethernet-)?ports$":
+        patternProperties:
+          "^(ethernet-)?port@[0-9]+$":
+            if:
+              required: [ ethernet ]
+            then:
+              if:
+                properties:
+                  reg:
+                    const: 5
+              then:
+                properties:
+                  phy-mode:
+                    enum:
+                      - 1000base-x
+                      - 2500base-x
+                      - rgmii
+                      - sgmii
+              else:
+                properties:
+                  phy-mode:
+                    enum:
+                      - 1000base-x
+                      - 2500base-x
+                      - sgmii
+
+allOf:
+  - $ref: dsa.yaml#
+  - if:
+      required:
+        - mediatek,mcm
+    then:
+      properties:
+        reset-gpios: false
+
+      required:
+        - resets
+        - reset-names
+
+  - dependencies:
+      interrupt-controller: [ interrupts ]
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7530
+    then:
+      $ref: "#/$defs/mt7530-dsa-port"
+      required:
+        - core-supply
+        - io-supply
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7531
+    then:
+      $ref: "#/$defs/mt7531-dsa-port"
+      properties:
+        gpio-controller: false
+        mediatek,mcm: false
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7621
+    then:
+      $ref: "#/$defs/mt7530-dsa-port"
+      required:
+        - mediatek,mcm
+
+unevaluatedProperties: false
+
+examples:
+  # Example 1: Standalone MT7530
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@1f {
+            compatible = "mediatek,mt7530";
+            reg = <0x1f>;
+
+            reset-gpios = <&pio 33 0>;
+
+            core-supply = <&mt6323_vpa_reg>;
+            io-supply = <&mt6323_vemc3v3_reg>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 2: MT7530 in MT7623AI SoC
+  - |
+    #include <dt-bindings/reset/mt2701-resets.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@1f {
+            compatible = "mediatek,mt7530";
+            reg = <0x1f>;
+
+            mediatek,mcm;
+            resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+            reset-names = "mcm";
+
+            core-supply = <&mt6323_vpa_reg>;
+            io-supply = <&mt6323_vemc3v3_reg>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "trgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 3: Standalone MT7531
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@0 {
+            compatible = "mediatek,mt7531";
+            reg = <0>;
+
+            reset-gpios = <&pio 54 0>;
+
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&pio>;
+            interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "2500base-x";
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 4: MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@1f {
+            compatible = "mediatek,mt7621";
+            reg = <0x1f>;
+
+            mediatek,mcm;
+            resets = <&sysc MT7621_RST_MCM>;
+            reset-names = "mcm";
+
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "trgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 5: MT7621: mux MT7530's phy4 to SoC's gmac1
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&rgmii2_pins>;
+
+        mac@1 {
+            compatible = "mediatek,eth-mac";
+            reg = <1>;
+
+            phy-mode = "rgmii";
+            phy-handle = <&example5_ethphy4>;
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* MT7530's phy4 */
+            example5_ethphy4: ethernet-phy@4 {
+                reg = <4>;
+            };
+
+            switch@1f {
+                compatible = "mediatek,mt7621";
+                reg = <0x1f>;
+
+                mediatek,mcm;
+                resets = <&sysc MT7621_RST_MCM>;
+                reset-names = "mcm";
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                ethernet-ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        label = "lan1";
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        label = "lan2";
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        label = "lan3";
+                    };
+
+                    port@3 {
+                        reg = <3>;
+                        label = "lan4";
+                    };
+
+                    /* Commented out, phy4 is muxed to gmac1.
+                    port@4 {
+                        reg = <4>;
+                        label = "wan";
+                    };
+                    */
+
+                    port@6 {
+                        reg = <6>;
+                        ethernet = <&gmac0>;
+                        phy-mode = "trgmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                        };
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 6: MT7621: mux external phy to SoC's gmac1
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&rgmii2_pins>;
+
+        mac@1 {
+            compatible = "mediatek,eth-mac";
+            reg = <1>;
+
+            phy-mode = "rgmii";
+            phy-handle = <&example6_ethphy7>;
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* External PHY */
+            example6_ethphy7: ethernet-phy@7 {
+                reg = <7>;
+                phy-mode = "rgmii";
+            };
+
+            switch@1f {
+                compatible = "mediatek,mt7621";
+                reg = <0x1f>;
+
+                mediatek,mcm;
+                resets = <&sysc MT7621_RST_MCM>;
+                reset-names = "mcm";
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                ethernet-ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        label = "lan1";
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        label = "lan2";
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        label = "lan3";
+                    };
+
+                    port@3 {
+                        reg = <3>;
+                        label = "lan4";
+                    };
+
+                    port@4 {
+                        reg = <4>;
+                        label = "wan";
+                    };
+
+                    port@6 {
+                        reg = <6>;
+                        ethernet = <&gmac0>;
+                        phy-mode = "trgmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                        };
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 7: MT7621: mux external phy to MT7530's port 5
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&rgmii2_pins>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* External PHY */
+            example7_ethphy7: ethernet-phy@7 {
+                reg = <7>;
+                phy-mode = "rgmii";
+            };
+
+            switch@1f {
+                compatible = "mediatek,mt7621";
+                reg = <0x1f>;
+
+                mediatek,mcm;
+                resets = <&sysc MT7621_RST_MCM>;
+                reset-names = "mcm";
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                ethernet-ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        label = "lan1";
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        label = "lan2";
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        label = "lan3";
+                    };
+
+                    port@3 {
+                        reg = <3>;
+                        label = "lan4";
+                    };
+
+                    port@4 {
+                        reg = <4>;
+                        label = "wan";
+                    };
+
+                    port@5 {
+                        reg = <5>;
+                        label = "extphy";
+                        phy-mode = "rgmii-txid";
+                        phy-handle = <&example7_ethphy7>;
+                    };
+
+                    port@6 {
+                        reg = <6>;
+                        ethernet = <&gmac0>;
+                        phy-mode = "trgmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
new file mode 100644
index 000000000000..4da75b1f9533
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip KSZ Series Ethernet switches
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+  - Woojung Huh <Woojung.Huh@microchip.com>
+
+allOf:
+  - $ref: dsa.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
+  # required and optional properties.
+  compatible:
+    enum:
+      - microchip,ksz8765
+      - microchip,ksz8794
+      - microchip,ksz8795
+      - microchip,ksz8863
+      - microchip,ksz8873
+      - microchip,ksz9477
+      - microchip,ksz9897
+      - microchip,ksz9896
+      - microchip,ksz9567
+      - microchip,ksz8565
+      - microchip,ksz9893
+      - microchip,ksz9563
+      - microchip,ksz8563
+
+  reset-gpios:
+    description:
+      Should be a gpio specifier for a reset line.
+    maxItems: 1
+
+  microchip,synclko-125:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.
+
+  microchip,synclko-disable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if the output SYNCLKO clock should be disabled. Do not mix with
+      microchip,synclko-125.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    // Ethernet switch connected via SPI to the host, CPU port wired to eth0:
+    eth0 {
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+    };
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-0 = <&pinctrl_spi_ksz>;
+        cs-gpios = <&pioC 25 0>;
+        id = <1>;
+
+        ksz9477: switch@0 {
+            compatible = "microchip,ksz9477";
+            reg = <0>;
+            reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+
+            spi-max-frequency = <44000000>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                port@4 {
+                    reg = <4>;
+                    label = "lan5";
+                };
+                port@5 {
+                    reg = <5>;
+                    ethernet = <&eth0>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+
+        ksz8565: switch@1 {
+            compatible = "microchip,ksz8565";
+            reg = <1>;
+
+            spi-max-frequency = <44000000>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&eth0>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
new file mode 100644
index 000000000000..630bf0f8294b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/microchip,lan937x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LAN937x Ethernet Switch Series Tree Bindings
+
+maintainers:
+  - UNGLinuxDriver@microchip.com
+
+allOf:
+  - $ref: dsa.yaml#
+
+properties:
+  compatible:
+    enum:
+      - microchip,lan9370
+      - microchip,lan9371
+      - microchip,lan9372
+      - microchip,lan9373
+      - microchip,lan9374
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 50000000
+
+  reset-gpios:
+    description: Optional gpio specifier for a reset line
+    maxItems: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        allOf:
+          - if:
+              properties:
+                phy-mode:
+                  contains:
+                    enum:
+                      - rgmii
+                      - rgmii-id
+                      - rgmii-txid
+                      - rgmii-rxid
+            then:
+              properties:
+                rx-internal-delay-ps:
+                  enum: [0, 2000]
+                  default: 0
+                tx-internal-delay-ps:
+                  enum: [0, 2000]
+                  default: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    macb0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            fixed-link {
+                    speed = <1000>;
+                    full-duplex;
+            };
+    };
+
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            lan9374: switch@0 {
+                    compatible = "microchip,lan9374";
+                    reg = <0>;
+                    spi-max-frequency = <44000000>;
+
+                    ethernet-ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                                    label = "lan1";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy0>;
+                            };
+
+                            port@1 {
+                                    reg = <1>;
+                                    label = "lan2";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy1>;
+                            };
+
+                            port@2 {
+                                    reg = <2>;
+                                    label = "lan4";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy2>;
+                            };
+
+                            port@3 {
+                                    reg = <3>;
+                                    label = "lan6";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy3>;
+                            };
+
+                            port@4 {
+                                    reg = <4>;
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <2000>;
+                                    ethernet = <&macb0>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+
+                            port@5 {
+                                    reg = <5>;
+                                    label = "lan7";
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <2000>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+
+                            port@6 {
+                                    reg = <6>;
+                                    label = "lan5";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy6>;
+                            };
+
+                            port@7 {
+                                    reg = <7>;
+                                    label = "lan3";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy7>;
+                            };
+                    };
+
+                    mdio {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            t1phy0: ethernet-phy@0{
+                                    reg = <0x0>;
+                            };
+
+                            t1phy1: ethernet-phy@1{
+                                    reg = <0x1>;
+                            };
+
+                            t1phy2: ethernet-phy@2{
+                                    reg = <0x2>;
+                            };
+
+                            t1phy3: ethernet-phy@3{
+                                    reg = <0x3>;
+                            };
+
+                            t1phy6: ethernet-phy@6{
+                                    reg = <0x6>;
+                            };
+
+                            t1phy7: ethernet-phy@7{
+                                    reg = <0x7>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
new file mode 100644
index 000000000000..8d93ed9c172c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
@@ -0,0 +1,260 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/mscc,ocelot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Ocelot Switch Family Device Tree Bindings
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+  - Claudiu Manoil <claudiu.manoil@nxp.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - UNGLinuxDriver@microchip.com
+
+description: |
+  There are multiple switches which are either part of the Ocelot-1 family, or
+  derivatives of this architecture. These switches can be found embedded in
+  various SoCs and accessed using MMIO, or as discrete chips and accessed over
+  SPI or PCIe. The present DSA binding shall be used when the host controlling
+  them performs packet I/O primarily through an Ethernet port of the switch
+  (which is attached to an Ethernet port of the host), rather than through
+  Frame DMA or register-based I/O.
+
+  VSC9953 (Seville):
+
+    This is found in the NXP T1040, where it is a memory-mapped platform
+    device.
+
+    The following PHY interface types are supported:
+
+      - phy-mode = "internal": on ports 8 and 9
+      - phy-mode = "sgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
+      - phy-mode = "qsgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
+      - phy-mode = "1000base-x": on ports 0, 1, 2, 3, 4, 5, 6, 7
+
+  VSC9959 (Felix):
+
+    This is found in the NXP LS1028A. It is a PCI device, part of the larger
+    enetc root complex. As a result, the ethernet-switch node is a sub-node of
+    the PCIe root complex node and its "reg" property conforms to the parent
+    node bindings, describing it as PF 5 of device 0, bus 0.
+
+    If any external switch port is enabled, the enetc PF2 (enetc_port2) should
+    be enabled as well. This is because the internal MDIO bus (exposed through
+    EA BAR 0) used to access the MAC PCS registers truly belongs to the enetc
+    port 2 and not to Felix.
+
+    The following PHY interface types are supported:
+
+      - phy-mode = "internal": on ports 4 and 5
+      - phy-mode = "sgmii": on ports 0, 1, 2, 3
+      - phy-mode = "qsgmii": on ports 0, 1, 2, 3
+      - phy-mode = "usxgmii": on ports 0, 1, 2, 3
+      - phy-mode = "1000base-x": on ports 0, 1, 2, 3
+      - phy-mode = "2500base-x": on ports 0, 1, 2, 3
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc9953-switch
+      - pci1957,eef0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+    description:
+      Used to signal availability of PTP TX timestamps, and state changes of
+      the MAC merge layer of ports that support Frame Preemption.
+
+  little-endian: true
+  big-endian: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dsa.yaml#
+  - if:
+      properties:
+        compatible:
+          const: pci1957,eef0
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  # Felix VSC9959 (NXP LS1028A)
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie { /* Integrated Endpoint Root Complex */
+        #address-cells = <3>;
+        #size-cells = <2>;
+
+        ethernet-switch@0,5 {
+            compatible = "pci1957,eef0";
+            reg = <0x000500 0 0 0 0>;
+            interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy0>;
+                    managed = "in-band-status";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy1>;
+                    managed = "in-band-status";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy2>;
+                    managed = "in-band-status";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy3>;
+                    managed = "in-band-status";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    ethernet = <&enetc_port2>;
+                    phy-mode = "internal";
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+
+                port@5 {
+                    reg = <5>;
+                    ethernet = <&enetc_port3>;
+                    phy-mode = "internal";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+  # Seville VSC9953 (NXP T1040)
+  - |
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ethernet-switch@800000 {
+            compatible = "mscc,vsc9953-switch";
+            reg = <0x800000 0x290000>;
+            little-endian;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy0>;
+                    managed = "in-band-status";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy1>;
+                    managed = "in-band-status";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy2>;
+                    managed = "in-band-status";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy3>;
+                    managed = "in-band-status";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy4>;
+                    managed = "in-band-status";
+                };
+
+                port@5 {
+                    reg = <5>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy5>;
+                    managed = "in-band-status";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy6>;
+                    managed = "in-band-status";
+                };
+
+                port@7 {
+                    reg = <7>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy7>;
+                    managed = "in-band-status";
+                };
+
+                port@8 {
+                    reg = <8>;
+                    phy-mode = "internal";
+                    ethernet = <&enet0>;
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+
+                port@9 {
+                    reg = <9>;
+                    phy-mode = "internal";
+                    ethernet = <&enet1>;
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
deleted file mode 100644
index c5ed5d25f642..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ /dev/null
@@ -1,310 +0,0 @@
-Mediatek MT7530 Ethernet switch
-================================
-
-Required properties:
-
-- compatible: may be compatible = "mediatek,mt7530"
-	or compatible = "mediatek,mt7621"
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-- mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
-	on multi-chip module belong to MT7623A has or the remotely standalone
-	chip as the function MT7623N reference board provided for.
-
-If compatible mediatek,mt7530 is set then the following properties are required
-
-- core-supply: Phandle to the regulator node necessary for the core power.
-- io-supply: Phandle to the regulator node necessary for the I/O power.
-	See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
-	for details for the regulator setup on these boards.
-
-If the property mediatek,mcm isn't defined, following property is required
-
-- reset-gpios: Should be a gpio specifier for a reset line.
-
-Else, following properties are required
-
-- resets : Phandle pointing to the system reset controller with
-	line index for the ethsys.
-- reset-names : Should be set to "mcm".
-
-Required properties for the child nodes within ports container:
-
-- reg: Port address described must be 6 for CPU port and from 0 to 5 for
-	user ports.
-- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
-	 "cpu".
-
-Port 5 of the switch is muxed between:
-1. GMAC5: GMAC5 can interface with another external MAC or PHY.
-2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC
-   of the SOC. Used in many setups where port 0/4 becomes the WAN port.
-   Note: On a MT7621 SOC with integrated switch: 2nd GMAC can only connected to
-	 GMAC5 when the gpios for RGMII2 (GPIO 22-33) are not used and not
-	 connected to external component!
-
-Port 5 modes/configurations:
-1. Port 5 is disabled and isolated: An external phy can interface to the 2nd
-   GMAC of the SOC.
-   In the case of a build-in MT7530 switch, port 5 shares the RGMII bus with 2nd
-   GMAC and an optional external phy. Mind the GPIO/pinctl settings of the SOC!
-2. Port 5 is muxed to PHY of port 0/4: Port 0/4 interfaces with 2nd GMAC.
-   It is a simple MAC to PHY interface, port 5 needs to be setup for xMII mode
-   and RGMII delay.
-3. Port 5 is muxed to GMAC5 and can interface to an external phy.
-   Port 5 becomes an extra switch port.
-   Only works on platform where external phy TX<->RX lines are swapped.
-   Like in the Ubiquiti ER-X-SFP.
-4. Port 5 is muxed to GMAC5 and interfaces with the 2nd GAMC as 2nd CPU port.
-   Currently a 2nd CPU port is not supported by DSA code.
-
-Depending on how the external PHY is wired:
-1. normal: The PHY can only connect to 2nd GMAC but not to the switch
-2. swapped: RGMII TX, RX are swapped; external phy interface with the switch as
-   a ethernet port. But can't interface to the 2nd GMAC.
-
-Based on the DT the port 5 mode is configured.
-
-Driver tries to lookup the phy-handle of the 2nd GMAC of the master device.
-When phy-handle matches PHY of port 0 or 4 then port 5 set-up as mode 2.
-phy-mode must be set, see also example 2 below!
- * mt7621: phy-mode = "rgmii-txid";
- * mt7623: phy-mode = "rgmii";
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required, optional properties and how the integrated switch subnodes must
-be specified.
-
-Example:
-
-	&mdio0 {
-		switch@0 {
-			compatible = "mediatek,mt7530";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			core-supply = <&mt6323_vpa_reg>;
-			io-supply = <&mt6323_vemc3v3_reg>;
-			reset-gpios = <&pio 33 0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "wan";
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "trgmii";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
-
-Example 2: MT7621: Port 4 is WAN port: 2nd GMAC -> Port 5 -> PHY port 4.
-
-&eth {
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "rgmii";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	gmac1: mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-mode = "rgmii-txid";
-		phy-handle = <&phy4>;
-	};
-
-	mdio: mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Internal phy */
-		phy4: ethernet-phy@4 {
-			reg = <4>;
-		};
-
-		mt7530: switch@1f {
-			compatible = "mediatek,mt7621";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1f>;
-			pinctrl-names = "default";
-			mediatek,mcm;
-
-			resets = <&rstctrl 2>;
-			reset-names = "mcm";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-/* Commented out. Port 4 is handled by 2nd GMAC.
-				port@4 {
-					reg = <4>;
-					label = "lan4";
-				};
-*/
-
-				cpu_port0: port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "rgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-						pause;
-					};
-				};
-			};
-		};
-	};
-};
-
-Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY.
-
-&eth {
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "rgmii";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	mdio: mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* External phy */
-		ephy5: ethernet-phy@7 {
-			reg = <7>;
-		};
-
-		mt7530: switch@1f {
-			compatible = "mediatek,mt7621";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1f>;
-			pinctrl-names = "default";
-			mediatek,mcm;
-
-			resets = <&rstctrl 2>;
-			reset-names = "mcm";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "lan4";
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "lan5";
-					phy-mode = "rgmii";
-					phy-handle = <&ephy5>;
-				};
-
-				cpu_port0: port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "rgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-						pause;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
new file mode 100644
index 000000000000..1e26d876d146
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/nxp,sja1105.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP SJA1105 Automotive Ethernet Switch Family Device Tree Bindings
+
+description:
+  The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944.pdf) of at
+  least one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum
+  cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed
+  depends on the SPI bus master driver.
+
+allOf:
+  - $ref: "dsa.yaml#"
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,sja1105e
+      - nxp,sja1105t
+      - nxp,sja1105p
+      - nxp,sja1105q
+      - nxp,sja1105r
+      - nxp,sja1105s
+      - nxp,sja1110a
+      - nxp,sja1110b
+      - nxp,sja1110c
+      - nxp,sja1110d
+
+  reg:
+    maxItems: 1
+
+  # Optional container node for the 2 internal MDIO buses of the SJA1110
+  # (one for the internal 100base-T1 PHYs and the other for the single
+  # 100base-TX PHY). The "reg" property does not have physical significance.
+  # The PHY addresses to port correspondence is as follows: for 100base-T1,
+  # port 5 has PHY 1, port 6 has PHY 2 etc, while for 100base-TX, port 1 has
+  # PHY 1.
+  mdios:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^mdio@[0-1]$":
+        $ref: /schemas/net/mdio.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          compatible:
+            oneOf:
+              - enum:
+                  - nxp,sja1110-base-t1-mdio
+                  - nxp,sja1110-base-tx-mdio
+
+          reg:
+            oneOf:
+              - enum:
+                  - 0
+                  - 1
+
+        required:
+          - compatible
+          - reg
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        allOf:
+          - if:
+              properties:
+                phy-mode:
+                  contains:
+                    enum:
+                      - rgmii
+                      - rgmii-rxid
+                      - rgmii-txid
+                      - rgmii-id
+            then:
+              properties:
+                rx-internal-delay-ps:
+                  $ref: "#/$defs/internal-delay-ps"
+                tx-internal-delay-ps:
+                  $ref: "#/$defs/internal-delay-ps"
+
+required:
+  - compatible
+  - reg
+
+$defs:
+  internal-delay-ps:
+    description:
+      Disable tunable delay lines using 0 ps, or enable them and select
+      the phase between 1640 ps (73.8 degree shift at 1Gbps) and 2260 ps
+      (101.7 degree shift) in increments of 0.9 degrees (20 ps).
+    enum:
+      [0, 1640, 1660, 1680, 1700, 1720, 1740, 1760, 1780, 1800, 1820, 1840,
+       1860, 1880, 1900, 1920, 1940, 1960, 1980, 2000, 2020, 2040, 2060, 2080,
+       2100, 2120, 2140, 2160, 2180, 2200, 2220, 2240, 2260]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-switch@1 {
+                    reg = <0x1>;
+                    compatible = "nxp,sja1105t";
+
+                    ethernet-ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    phy-handle = <&rgmii_phy6>;
+                                    phy-mode = "rgmii-id";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
+                                    reg = <0>;
+                            };
+
+                            port@1 {
+                                    phy-handle = <&rgmii_phy3>;
+                                    phy-mode = "rgmii-id";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
+                                    reg = <1>;
+                            };
+
+                            port@2 {
+                                    phy-handle = <&rgmii_phy4>;
+                                    phy-mode = "rgmii-id";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
+                                    reg = <2>;
+                            };
+
+                            port@3 {
+                                    phy-handle = <&rgmii_phy4>;
+                                    phy-mode = "rgmii-id";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
+                                    reg = <3>;
+                            };
+
+                            port@4 {
+                                    ethernet = <&enet2>;
+                                    phy-mode = "rgmii";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
+                                    reg = <4>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
deleted file mode 100644
index ccbc6d89325d..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ /dev/null
@@ -1,175 +0,0 @@
-* Qualcomm Atheros QCA8xxx switch family
-
-Required properties:
-
-- compatible: should be one of:
-    "qca,qca8334"
-    "qca,qca8337"
-
-- #size-cells: must be 0
-- #address-cells: must be 1
-
-Optional properties:
-
-- reset-gpios: GPIO to be used to reset the whole device
-
-Subnodes:
-
-The integrated switch subnode should be specified according to the binding
-described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external
-mdio-bus each subnode describing a port needs to have a valid phandle
-referencing the internal PHY it is connected to. This is because there's no
-N:N mapping of port and PHY id.
-
-Don't use mixed external and internal mdio-bus configurations, as this is
-not supported by the hardware.
-
-The CPU port of this switch is always port 0.
-
-A CPU port node has the following optional node:
-
-- fixed-link            : Fixed-link subnode describing a link to a non-MDIO
-                          managed entity. See
-                          Documentation/devicetree/bindings/net/fixed-link.txt
-                          for details.
-
-For QCA8K the 'fixed-link' sub-node supports only the following properties:
-
-- 'speed' (integer, mandatory), to indicate the link speed. Accepted
-  values are 10, 100 and 1000
-- 'full-duplex' (boolean, optional), to indicate that full duplex is
-  used. When absent, half duplex is assumed.
-
-Examples:
-
-for the external mdio-bus configuration:
-
-	&mdio0 {
-		phy_port1: phy@0 {
-			reg = <0>;
-		};
-
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
-		phy_port4: phy@3 {
-			reg = <3>;
-		};
-
-		phy_port5: phy@4 {
-			reg = <4>;
-		};
-
-		switch@10 {
-			compatible = "qca,qca8337";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-			reg = <0x10>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					label = "cpu";
-					ethernet = <&gmac1>;
-					phy-mode = "rgmii";
-					fixed-link {
-						speed = 1000;
-						full-duplex;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-					phy-handle = <&phy_port1>;
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-					phy-handle = <&phy_port2>;
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-					phy-handle = <&phy_port3>;
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "lan4";
-					phy-handle = <&phy_port4>;
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "wan";
-					phy-handle = <&phy_port5>;
-				};
-			};
-		};
-	};
-
-for the internal master mdio-bus configuration:
-
-	&mdio0 {
-		switch@10 {
-			compatible = "qca,qca8337";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-			reg = <0x10>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "cpu";
-					ethernet = <&gmac1>;
-					phy-mode = "rgmii";
-					fixed-link {
-						speed = 1000;
-						full-duplex;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "lan4";
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "wan";
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
new file mode 100644
index 000000000000..978162df51f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -0,0 +1,306 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/qca8k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros QCA83xx switch family
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+description:
+  If the QCA8K switch is connect to an SoC's external mdio-bus, each subnode
+  describing a port needs to have a valid phandle referencing the internal PHY
+  it is connected to. This is because there is no N:N mapping of port and PHY
+  ID. To declare the internal mdio-bus configuration, declare an MDIO node in
+  the switch node and declare the phandle for the port, referencing the internal
+  PHY it is connected to. In this config, an internal mdio-bus is registered and
+  the MDIO master is used for communication. Mixed external and internal
+  mdio-bus configurations are not supported by the hardware.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qca,qca8327
+          - qca,qca8328
+          - qca,qca8334
+          - qca,qca8337
+    description: |
+      qca,qca8328: referenced as AR8328(N)-AK1(A/B) QFN 176 pin package
+      qca,qca8327: referenced as AR8327(N)-AL1A DR-QFN 148 pin package
+      qca,qca8334: referenced as QCA8334-AL3C QFN 88 pin package
+      qca,qca8337: referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO to be used to reset the whole device
+    maxItems: 1
+
+  qca,ignore-power-on-sel:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Ignore power-on pin strapping to configure LED open-drain or EEPROM
+      presence. This is needed for devices with incorrect configuration or when
+      the OEM has decided not to use pin strapping and falls back to SW regs.
+
+  qca,led-open-drain:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set LEDs to open-drain mode. This requires the qca,ignore-power-on-sel to
+      be set, otherwise the driver will fail at probe. This is required if the
+      OEM does not use pin strapping to set this mode and prefers to set it
+      using SW regs. The pin strappings related to LED open-drain mode are
+      B68 on the QCA832x and B49 on the QCA833x.
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+    description: Qca8k switch have an internal mdio to access switch port.
+                 If this is not present, the legacy mapping is used and the
+                 internal mdio access is used.
+                 With the legacy mapping the reg corresponding to the internal
+                 mdio is the switch reg with an offset of -1.
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^(ethernet-)?port@[0-6]$":
+        type: object
+        description: Ethernet switch ports
+
+        $ref: dsa-port.yaml#
+
+        properties:
+          qca,sgmii-rxclk-falling-edge:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Set the receive clock phase to falling edge. Mostly commonly used on
+              the QCA8327 with CPU port 0 set to SGMII.
+
+          qca,sgmii-txclk-falling-edge:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Set the transmit clock phase to falling edge.
+
+          qca,sgmii-enable-pll:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              For SGMII CPU port, explicitly enable PLL, TX and RX chain along with
+              Signal Detection. On the QCA8327 this should not be enabled, otherwise
+              the SGMII port will not initialize. When used on the QCA8337, revision 3
+              or greater, a warning will be displayed. When the CPU port is set to
+              SGMII on the QCA8337, it is advised to set this unless a communication
+              issue is observed.
+
+        unevaluatedProperties: false
+
+oneOf:
+  - required:
+      - ports
+  - required:
+      - ethernet-ports
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        external_phy_port1: ethernet-phy@0 {
+            reg = <0>;
+        };
+
+        external_phy_port2: ethernet-phy@1 {
+            reg = <1>;
+        };
+
+        external_phy_port3: ethernet-phy@2 {
+            reg = <2>;
+        };
+
+        external_phy_port4: ethernet-phy@3 {
+            reg = <3>;
+        };
+
+        external_phy_port5: ethernet-phy@4 {
+            reg = <4>;
+        };
+
+        switch@10 {
+            compatible = "qca,qca8337";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+            reg = <0x10>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    ethernet = <&gmac1>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan1";
+                    phy-handle = <&external_phy_port1>;
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan2";
+                    phy-handle = <&external_phy_port2>;
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan3";
+                    phy-handle = <&external_phy_port3>;
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "lan4";
+                    phy-handle = <&external_phy_port4>;
+                };
+
+                port@5 {
+                    reg = <5>;
+                    label = "wan";
+                    phy-handle = <&external_phy_port5>;
+                };
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@10 {
+            compatible = "qca,qca8337";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+            reg = <0x10>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    ethernet = <&gmac1>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan1";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port1>;
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan2";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port2>;
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan3";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port3>;
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "lan4";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port4>;
+                };
+
+                port@5 {
+                    reg = <5>;
+                    label = "wan";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port5>;
+                };
+
+                port@6 {
+                    reg = <0>;
+                    ethernet = <&gmac1>;
+                    phy-mode = "sgmii";
+
+                    qca,sgmii-rxclk-falling-edge;
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                internal_phy_port1: ethernet-phy@0 {
+                    reg = <0>;
+                };
+
+                internal_phy_port2: ethernet-phy@1 {
+                    reg = <1>;
+                };
+
+                internal_phy_port3: ethernet-phy@2 {
+                    reg = <2>;
+                };
+
+                internal_phy_port4: ethernet-phy@3 {
+                    reg = <3>;
+                };
+
+                internal_phy_port5: ethernet-phy@4 {
+                    reg = <4>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
deleted file mode 100644
index b6ae8541bd55..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
+++ /dev/null
@@ -1,153 +0,0 @@
-Realtek SMI-based Switches
-==========================
-
-The SMI "Simple Management Interface" is a two-wire protocol using
-bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does
-not use the MDIO protocol. This binding defines how to specify the
-SMI-based Realtek devices.
-
-Required properties:
-
-- compatible: must be exactly one of:
-      "realtek,rtl8366"
-      "realtek,rtl8366rb" (4+1 ports)
-      "realtek,rtl8366s"  (4+1 ports)
-      "realtek,rtl8367"
-      "realtek,rtl8367b"
-      "realtek,rtl8368s"  (8 port)
-      "realtek,rtl8369"
-      "realtek,rtl8370"   (8 port)
-
-Required properties:
-- mdc-gpios: GPIO line for the MDC clock line.
-- mdio-gpios: GPIO line for the MDIO data line.
-- reset-gpios: GPIO line for the reset signal.
-
-Optional properties:
-- realtek,disable-leds: if the LED drivers are not used in the
-  hardware design this will disable them so they are not turned on
-  and wasting power.
-
-Required subnodes:
-
-- interrupt-controller
-
-  This defines an interrupt controller with an IRQ line (typically
-  a GPIO) that will demultiplex and handle the interrupt from the single
-  interrupt line coming out of one of the SMI-based chips. It most
-  importantly provides link up/down interrupts to the PHY blocks inside
-  the ASIC.
-
-Required properties of interrupt-controller:
-
-- interrupt: parent interrupt, see interrupt-controller/interrupts.txt
-- interrupt-controller: see interrupt-controller/interrupts.txt
-- #address-cells: should be <0>
-- #interrupt-cells: should be <1>
-
-- mdio
-
-  This defines the internal MDIO bus of the SMI device, mostly for the
-  purpose of being able to hook the interrupts to the right PHY and
-  the right PHY to the corresponding port.
-
-Required properties of mdio:
-
-- compatible: should be set to "realtek,smi-mdio" for all SMI devices
-
-See net/mdio.txt for additional MDIO bus properties.
-
-See net/dsa/dsa.txt for a list of additional required and optional properties
-and subnodes of DSA switches.
-
-Examples:
-
-switch {
-	compatible = "realtek,rtl8366rb";
-	/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
-	mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-	mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-	reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-
-	switch_intc: interrupt-controller {
-		/* GPIO 15 provides the interrupt */
-		interrupt-parent = <&gpio0>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-	};
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		port@0 {
-			reg = <0>;
-			label = "lan0";
-			phy-handle = <&phy0>;
-		};
-		port@1 {
-			reg = <1>;
-			label = "lan1";
-			phy-handle = <&phy1>;
-		};
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-			phy-handle = <&phy2>;
-		};
-		port@3 {
-			reg = <3>;
-			label = "lan3";
-			phy-handle = <&phy3>;
-		};
-		port@4 {
-			reg = <4>;
-			label = "wan";
-			phy-handle = <&phy4>;
-		};
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-			phy-mode = "rgmii";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-
-	mdio {
-		compatible = "realtek,smi-mdio", "dsa-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: phy@0 {
-			reg = <0>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <0>;
-		};
-		phy1: phy@1 {
-			reg = <1>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <1>;
-		};
-		phy2: phy@2 {
-			reg = <2>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <2>;
-		};
-		phy3: phy@3 {
-			reg = <3>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <3>;
-		};
-		phy4: phy@4 {
-			reg = <4>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <12>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
new file mode 100644
index 000000000000..1a7d45a8ad66
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -0,0 +1,386 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/realtek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek switches for unmanaged switches
+
+allOf:
+  - $ref: dsa.yaml#
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Realtek advertises these chips as fast/gigabit switches or unmanaged
+  switches. They can be controlled using different interfaces, like SMI,
+  MDIO or SPI.
+
+  The SMI "Simple Management Interface" is a two-wire protocol using
+  bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does
+  not use the MDIO protocol. This binding defines how to specify the
+  SMI-based Realtek devices. The realtek-smi driver is a platform driver
+  and it must be inserted inside a platform node.
+
+  The MDIO-connected switches use MDIO protocol to access their registers.
+  The realtek-mdio driver is an MDIO driver and it must be inserted inside
+  an MDIO node.
+
+  The compatible string is only used to identify which (silicon) family the
+  switch belongs to. Roughly speaking, a family is any set of Realtek switches
+  whose chip identification register(s) have a common location and semantics.
+  The different models in a given family can be automatically disambiguated by
+  parsing the chip identification register(s) according to the given family,
+  avoiding the need for a unique compatible string for each model.
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtl8365mb
+      - realtek,rtl8366rb
+    description: |
+      realtek,rtl8365mb:
+        Use with models RTL8363NB, RTL8363NB-VB, RTL8363SC, RTL8363SC-VB,
+        RTL8364NB, RTL8364NB-VB, RTL8365MB, RTL8366SC, RTL8367RB-VB, RTL8367S,
+        RTL8367SB, RTL8370MB, RTL8310SR
+      realtek,rtl8366rb:
+        Use with models RTL8366RB, RTL8366S
+
+  mdc-gpios:
+    description: GPIO line for the MDC clock line.
+    maxItems: 1
+
+  mdio-gpios:
+    description: GPIO line for the MDIO data line.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO to be used to reset the whole device
+    maxItems: 1
+
+  realtek,disable-leds:
+    type: boolean
+    description: |
+      if the LED drivers are not used in the hardware design,
+      this will disable them so they are not turned on
+      and wasting power.
+
+  interrupt-controller:
+    type: object
+    description: |
+      This defines an interrupt controller with an IRQ line (typically
+      a GPIO) that will demultiplex and handle the interrupt from the single
+      interrupt line coming out of one of the Realtek switch chips. It most
+      importantly provides link up/down interrupts to the PHY blocks inside
+      the ASIC.
+
+    properties:
+
+      interrupt-controller: true
+
+      interrupts:
+        maxItems: 1
+        description:
+          A single IRQ line from the switch, either active LOW or HIGH
+
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+    required:
+      - interrupt-controller
+      - '#address-cells'
+      - '#interrupt-cells'
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        const: realtek,smi-mdio
+
+if:
+  required:
+    - reg
+
+then:
+  $ref: /schemas/spi/spi-peripheral-props.yaml#
+  not:
+    required:
+      - mdc-gpios
+      - mdio-gpios
+      - mdio
+
+  properties:
+    mdc-gpios: false
+    mdio-gpios: false
+    mdio: false
+
+else:
+  required:
+    - mdc-gpios
+    - mdio-gpios
+    - mdio
+    - reset-gpios
+
+required:
+  - compatible
+
+    #  - mdc-gpios
+    #  - mdio-gpios
+    #  - reset-gpios
+    #  - mdio
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    platform {
+            switch {
+                    compatible = "realtek,rtl8366rb";
+                    /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
+                    mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+                    mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+
+                    switch_intc1: interrupt-controller {
+                            /* GPIO 15 provides the interrupt */
+                            interrupt-parent = <&gpio0>;
+                            interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+                            interrupt-controller;
+                            #address-cells = <0>;
+                            #interrupt-cells = <1>;
+                    };
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+                            port@0 {
+                                    reg = <0>;
+                                    label = "lan0";
+                                    phy-handle = <&phy0>;
+                            };
+                            port@1 {
+                                    reg = <1>;
+                                    label = "lan1";
+                                    phy-handle = <&phy1>;
+                            };
+                            port@2 {
+                                    reg = <2>;
+                                    label = "lan2";
+                                    phy-handle = <&phy2>;
+                            };
+                            port@3 {
+                                    reg = <3>;
+                                    label = "lan3";
+                                    phy-handle = <&phy3>;
+                            };
+                            port@4 {
+                                    reg = <4>;
+                                    label = "wan";
+                                    phy-handle = <&phy4>;
+                            };
+                            port@5 {
+                                    reg = <5>;
+                                    ethernet = <&gmac0>;
+                                    phy-mode = "rgmii";
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+                    };
+
+                    mdio {
+                            compatible = "realtek,smi-mdio";
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            phy0: ethernet-phy@0 {
+                                    reg = <0>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <0>;
+                            };
+                            phy1: ethernet-phy@1 {
+                                    reg = <1>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <1>;
+                            };
+                            phy2: ethernet-phy@2 {
+                                    reg = <2>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <2>;
+                            };
+                            phy3: ethernet-phy@3 {
+                                    reg = <3>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <3>;
+                            };
+                            phy4: ethernet-phy@4 {
+                                    reg = <4>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <12>;
+                            };
+                    };
+            };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    platform {
+            switch {
+                    compatible = "realtek,rtl8365mb";
+                    mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+                    mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+
+                    switch_intc2: interrupt-controller {
+                            interrupt-parent = <&gpio5>;
+                            interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+                            interrupt-controller;
+                            #address-cells = <0>;
+                            #interrupt-cells = <1>;
+                    };
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+                            port@0 {
+                                    reg = <0>;
+                                    label = "swp0";
+                                    phy-handle = <&ethphy0>;
+                            };
+                            port@1 {
+                                    reg = <1>;
+                                    label = "swp1";
+                                    phy-handle = <&ethphy1>;
+                            };
+                            port@2 {
+                                    reg = <2>;
+                                    label = "swp2";
+                                    phy-handle = <&ethphy2>;
+                            };
+                            port@3 {
+                                    reg = <3>;
+                                    label = "swp3";
+                                    phy-handle = <&ethphy3>;
+                            };
+                            port@6 {
+                                    reg = <6>;
+                                    ethernet = <&fec1>;
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <2000>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                            pause;
+                                    };
+                            };
+                    };
+
+                    mdio {
+                            compatible = "realtek,smi-mdio";
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            ethphy0: ethernet-phy@0 {
+                                    reg = <0>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <0>;
+                            };
+                            ethphy1: ethernet-phy@1 {
+                                    reg = <1>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <1>;
+                            };
+                            ethphy2: ethernet-phy@2 {
+                                    reg = <2>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <2>;
+                            };
+                            ethphy3: ethernet-phy@3 {
+                                    reg = <3>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <3>;
+                            };
+                    };
+            };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            switch@29 {
+                    compatible = "realtek,rtl8365mb";
+                    reg = <29>;
+
+                    reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+
+                    switch_intc3: interrupt-controller {
+                            interrupt-parent = <&gpio0>;
+                            interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+                            interrupt-controller;
+                            #address-cells = <0>;
+                            #interrupt-cells = <1>;
+                    };
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                                    label = "lan4";
+                            };
+
+                            port@1 {
+                                    reg = <1>;
+                                    label = "lan3";
+                            };
+
+                            port@2 {
+                                    reg = <2>;
+                                    label = "lan2";
+                            };
+
+                            port@3 {
+                                    reg = <3>;
+                                    label = "lan1";
+                            };
+
+                            port@4 {
+                                    reg = <4>;
+                                    label = "wan";
+                            };
+
+                            port@7 {
+                                    reg = <7>;
+                                    ethernet = <&ethernet>;
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <0>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+                    };
+            };
+      };
diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
new file mode 100644
index 000000000000..7ca9c19a157c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/renesas,rzn1-a5psw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Advanced 5 ports ethernet switch
+
+maintainers:
+  - Clément Léger <clement.leger@bootlin.com>
+
+description: |
+  The advanced 5 ports switch is present on the Renesas RZ/N1 SoC family and
+  handles 4 ports + 1 CPU management port.
+
+allOf:
+  - $ref: dsa.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-a5psw
+      - const: renesas,rzn1-a5psw
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Device Level Ring (DLR) interrupt
+      - description: Switch interrupt
+      - description: Parallel Redundancy Protocol (PRP) interrupt
+      - description: Integrated HUB module interrupt
+      - description: Receive Pattern Match interrupt
+
+  interrupt-names:
+    items:
+      - const: dlr
+      - const: switch
+      - const: prp
+      - const: hub
+      - const: ptrn
+
+  power-domains:
+    maxItems: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+  clocks:
+    items:
+      - description: AHB clock used for the switch register interface
+      - description: Switch system clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: clk
+
+  ethernet-ports:
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^(ethernet-)?port@[0-4]$":
+        type: object
+        description: Ethernet switch ports
+
+        properties:
+          pcs-handle:
+            description:
+              phandle pointing to a PCS sub-node compatible with
+              renesas,rzn1-miic.yaml#
+            $ref: /schemas/types.yaml#/definitions/phandle
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    switch@44050000 {
+        compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw";
+        reg = <0x44050000 0x10000>;
+        clocks = <&sysctrl R9A06G032_HCLK_SWITCH>, <&sysctrl R9A06G032_CLK_SWITCH>;
+        clock-names = "hclk", "clk";
+        power-domains = <&sysctrl>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "dlr", "switch", "prp", "hub", "ptrn";
+
+        dsa,member = <0 0>;
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                label = "lan0";
+                phy-handle = <&switch0phy3>;
+                pcs-handle = <&mii_conv4>;
+            };
+
+            port@1 {
+                reg = <1>;
+                label = "lan1";
+                phy-handle = <&switch0phy1>;
+                pcs-handle = <&mii_conv3>;
+            };
+
+            port@4 {
+                reg = <4>;
+                ethernet = <&gmac2>;
+                phy-mode = "internal";
+
+                fixed-link {
+                  speed = <1000>;
+                  full-duplex;
+                };
+            };
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reset-gpios = <&gpio0a 2 GPIO_ACTIVE_HIGH>;
+            reset-delay-us = <15>;
+            clock-frequency = <2500000>;
+
+            switch0phy1: ethernet-phy@1{
+                reg = <1>;
+            };
+
+            switch0phy3: ethernet-phy@3{
+                reg = <3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/sja1105.txt b/Documentation/devicetree/bindings/net/dsa/sja1105.txt
deleted file mode 100644
index 13fd21074d48..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/sja1105.txt
+++ /dev/null
@@ -1,156 +0,0 @@
-NXP SJA1105 switch driver
-=========================
-
-Required properties:
-
-- compatible:
-	Must be one of:
-	- "nxp,sja1105e"
-	- "nxp,sja1105t"
-	- "nxp,sja1105p"
-	- "nxp,sja1105q"
-	- "nxp,sja1105r"
-	- "nxp,sja1105s"
-
-	Although the device ID could be detected at runtime, explicit bindings
-	are required in order to be able to statically check their validity.
-	For example, SGMII can only be specified on port 4 of R and S devices,
-	and the non-SGMII devices, while pin-compatible, are not equal in terms
-	of support for RGMII internal delays (supported on P/Q/R/S, but not on
-	E/T).
-
-Optional properties:
-
-- sja1105,role-mac:
-- sja1105,role-phy:
-	Boolean properties that can be assigned under each port node. By
-	default (unless otherwise specified) a port is configured as MAC if it
-	is driving a PHY (phy-handle is present) or as PHY if it is PHY-less
-	(fixed-link specified, presumably because it is connected to a MAC).
-	The effect of this property (in either its implicit or explicit form)
-	is:
-	- In the case of MII or RMII it specifies whether the SJA1105 port is a
-	  clock source or sink for this interface (not applicable for RGMII
-	  where there is a Tx and an Rx clock).
-	- In the case of RGMII it affects the behavior regarding internal
-	  delays:
-	  1. If sja1105,role-mac is specified, and the phy-mode property is one
-	     of "rgmii-id", "rgmii-txid" or "rgmii-rxid", then the entity
-	     designated to apply the delay/clock skew necessary for RGMII
-	     is the PHY. The SJA1105 MAC does not apply any internal delays.
-	  2. If sja1105,role-phy is specified, and the phy-mode property is one
-	     of the above, the designated entity to apply the internal delays
-	     is the SJA1105 MAC (if hardware-supported). This is only supported
-	     by the second-generation (P/Q/R/S) hardware. On a first-generation
-	     E or T device, it is an error to specify an RGMII phy-mode other
-	     than "rgmii" for a port that is in fixed-link mode. In that case,
-	     the clock skew must either be added by the MAC at the other end of
-	     the fixed-link, or by PCB serpentine traces on the board.
-	These properties are required, for example, in the case where SJA1105
-	ports are at both ends of a MII/RMII PHY-less setup. One end would need
-	to have sja1105,role-mac, while the other sja1105,role-phy.
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for the list of standard
-DSA required and optional properties.
-
-Other observations
-------------------
-
-The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944) of at least
-one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum
-cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed
-depends on the SPI bus master driver.
-
-Example
--------
-
-Ethernet switch connected via SPI to the host, CPU port wired to enet2:
-
-arch/arm/boot/dts/ls1021a-tsn.dts:
-
-/* SPI controller of the LS1021 */
-&dspi0 {
-	sja1105@1 {
-		reg = <0x1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nxp,sja1105t";
-		spi-max-frequency = <4000000>;
-		fsl,spi-cs-sck-delay = <1000>;
-		fsl,spi-sck-cs-delay = <1000>;
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				/* ETH5 written on chassis */
-				label = "swp5";
-				phy-handle = <&rgmii_phy6>;
-				phy-mode = "rgmii-id";
-				reg = <0>;
-				/* Implicit "sja1105,role-mac;" */
-			};
-			port@1 {
-				/* ETH2 written on chassis */
-				label = "swp2";
-				phy-handle = <&rgmii_phy3>;
-				phy-mode = "rgmii-id";
-				reg = <1>;
-				/* Implicit "sja1105,role-mac;" */
-			};
-			port@2 {
-				/* ETH3 written on chassis */
-				label = "swp3";
-				phy-handle = <&rgmii_phy4>;
-				phy-mode = "rgmii-id";
-				reg = <2>;
-				/* Implicit "sja1105,role-mac;" */
-			};
-			port@3 {
-				/* ETH4 written on chassis */
-				phy-handle = <&rgmii_phy5>;
-				label = "swp4";
-				phy-mode = "rgmii-id";
-				reg = <3>;
-				/* Implicit "sja1105,role-mac;" */
-			};
-			port@4 {
-				/* Internal port connected to eth2 */
-				ethernet = <&enet2>;
-				phy-mode = "rgmii";
-				reg = <4>;
-				/* Implicit "sja1105,role-phy;" */
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-/* MDIO controller of the LS1021 */
-&mdio0 {
-	/* BCM5464 */
-	rgmii_phy3: ethernet-phy@3 {
-		reg = <0x3>;
-	};
-	rgmii_phy4: ethernet-phy@4 {
-		reg = <0x4>;
-	};
-	rgmii_phy5: ethernet-phy@5 {
-		reg = <0x5>;
-	};
-	rgmii_phy6: ethernet-phy@6 {
-		reg = <0x6>;
-	};
-};
-
-/* Ethernet master port of the LS1021 */
-&enet2 {
-	phy-connection-type = "rgmii";
-	status = "ok";
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
index bbf4a13f6d75..258bef483673 100644
--- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
+++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
@@ -75,7 +75,6 @@ switch@0 {
 		};
 		vsc: port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&gmac1>;
 			phy-mode = "rgmii";
 			fixed-link {
@@ -117,7 +116,6 @@ switch@2,0 {
 		};
 		vsc: port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&enet0>;
 			phy-mode = "rgmii";
 			fixed-link {
diff --git a/Documentation/devicetree/bindings/net/emac_rockchip.txt b/Documentation/devicetree/bindings/net/emac_rockchip.txt
deleted file mode 100644
index 05bd7dafce17..000000000000
--- a/Documentation/devicetree/bindings/net/emac_rockchip.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* ARC EMAC 10/100 Ethernet platform driver for Rockchip RK3036/RK3066/RK3188 SoCs
-
-Required properties:
-- compatible: should be "rockchip,<name>-emac"
-   "rockchip,rk3036-emac": found on RK3036 SoCs
-   "rockchip,rk3066-emac": found on RK3066 SoCs
-   "rockchip,rk3188-emac": found on RK3188 SoCs
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the EMAC interrupts
-- rockchip,grf: phandle to the syscon grf used to control speed and mode
-  for emac.
-- phy: see ethernet.txt file in the same directory.
-- phy-mode: see ethernet.txt file in the same directory.
-
-Optional properties:
-- phy-supply: phandle to a regulator if the PHY needs one
-
-Clock handling:
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "hclk" for the host clock needed to calculate and set
-  polling period of EMAC and "macref" for the reference clock needed to transfer
-  data to and from the phy.
-
-Child nodes of the driver are the individual PHY devices connected to the
-MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
-
-Examples:
-
-ethernet@10204000 {
-	compatible = "rockchip,rk3188-emac";
-	reg = <0xc0fc2000 0x3c>;
-	interrupts = <6>;
-	mac-address = [ 00 11 22 33 44 55 ];
-
-	clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
-	clock-names = "hclk", "macref";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
-
-	rockchip,grf = <&grf>;
-
-	phy = <&phy0>;
-	phy-mode = "rmii";
-	phy-supply = <&vcc_rmii>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	phy0: ethernet-phy@0 {
-	      reg = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml
new file mode 100644
index 000000000000..a6921e805e37
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/engleder,tsnep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TSN endpoint Ethernet MAC binding
+
+maintainers:
+  - Gerhard Engleder <gerhard@engleder-embedded.com>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: engleder,tsnep
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: mac
+      - const: txrx-1
+      - const: txrx-2
+      - const: txrx-3
+      - const: txrx-4
+      - const: txrx-5
+      - const: txrx-6
+      - const: txrx-7
+    description:
+      The main interrupt for basic MAC features and the first TX/RX queue pair
+      is named "mac". "txrx-[1-7]" are the interrupts for additional TX/RX
+      queue pairs.
+
+  dma-coherent: true
+
+  local-mac-address: true
+
+  mac-address: true
+
+  nvmem-cells: true
+
+  nvmem-cell-names: true
+
+  phy-connection-type:
+    enum:
+      - mii
+      - gmii
+      - rgmii
+      - rgmii-id
+
+  phy-mode: true
+
+  phy-handle: true
+
+  mdio:
+    type: object
+    $ref: "mdio.yaml#"
+    description: optional node for embedded MDIO controller
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    axi {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        tsnep0: ethernet@a0000000 {
+            compatible = "engleder,tsnep";
+            reg = <0x0 0xa0000000 0x0 0x10000>;
+            interrupts = <0 89 1>;
+            interrupt-parent = <&gic>;
+            local-mac-address = [00 00 00 00 00 00];
+            phy-mode = "rgmii";
+            phy-handle = <&phy0>;
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                suppress-preamble;
+                phy0: ethernet-phy@1 {
+                    reg = <1>;
+                    rxc-skew-ps = <1080>;
+                };
+            };
+        };
+
+        tsnep1: ethernet@a0010000 {
+            compatible = "engleder,tsnep";
+            reg = <0x0 0xa0010000 0x0 0x10000>;
+            interrupts = <0 93 1>, <0 94 1>, <0 95 1>, <0 96 1>;
+            interrupt-names = "mac", "txrx-1", "txrx-2", "txrx-3";
+            interrupt-parent = <&gic>;
+            local-mac-address = [00 00 00 00 00 00];
+            phy-mode = "rgmii";
+            phy-handle = <&phy1>;
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                suppress-preamble;
+                phy1: ethernet-phy@1 {
+                    reg = <1>;
+                    rxc-skew-ps = <1080>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index ac471b60ed6a..4b3c590fcebf 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -13,36 +13,36 @@ properties:
   $nodename:
     pattern: "^ethernet(@.*)?$"
 
+  label:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Human readable label on a port of a box.
+
   local-mac-address:
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint8-array
-      - items:
-          - minItems: 6
-            maxItems: 6
     description:
       Specifies the MAC address that was assigned to the network device.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 6
+    maxItems: 6
 
   mac-address:
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint8-array
-      - items:
-          - minItems: 6
-            maxItems: 6
     description:
       Specifies the MAC address that was last used by the boot
       program; should be used in cases where the MAC address assigned
       to the device by the boot program is different from the
       local-mac-address property.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 6
+    maxItems: 6
 
   max-frame-size:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Maximum transfer unit (IEEE defined MTU), rather than the
       maximum frame size (there\'s contradiction in the Devicetree
       Specification).
 
   max-speed:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Specifies maximum speed in Mbit/s supported by the device.
 
@@ -51,12 +51,13 @@ properties:
     description:
       Reference to an nvmem node for the MAC address
 
-  nvmem-cells-names:
+  nvmem-cell-names:
     const: mac-address
 
   phy-connection-type:
     description:
-      Operation mode of the PHY interface
+      Specifies interface type between the Ethernet device and a physical
+      layer (PHY) device.
     enum:
       # There is not a standard bus between the MAC and the PHY,
       # something proprietary is being used to embed the PHY in the
@@ -66,9 +67,12 @@ properties:
       - gmii
       - sgmii
       - qsgmii
+      - qusgmii
       - tbi
       - rev-mii
       - rmii
+      - rev-rmii
+      - moca
 
       # RX and TX delays are added by the MAC when required
       - rgmii
@@ -90,18 +94,27 @@ properties:
       - trgmii
       - 1000base-x
       - 2500base-x
+      - 5gbase-r
       - rxaui
       - xaui
 
       # 10GBASE-KR, XFI, SFI
       - 10gbase-kr
       - usxgmii
+      - 10gbase-r
+      - 25gbase-r
 
   phy-mode:
     $ref: "#/properties/phy-connection-type"
 
+  pcs-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies a reference to a node representing a PCS PHY device on a MDIO
+      bus to link with an external PHY (phy-handle) if exists.
+
   phy-handle:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Specifies a reference to a node representing a PHY device.
 
@@ -114,7 +127,7 @@ properties:
     deprecated: true
 
   rx-fifo-depth:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       The size of the controller\'s receive fifo in bytes. This is used
       for components that can have configurable receive fifo sizes,
@@ -122,90 +135,110 @@ properties:
       such as flow control thresholds.
 
   sfp:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Specifies a reference to a node representing a SFP cage.
 
   tx-fifo-depth:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       The size of the controller\'s transmit fifo in bytes. This
       is used for components that can have configurable fifo sizes.
 
   managed:
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
-      - default: auto
-        enum:
-          - auto
-          - in-band-status
     description:
       Specifies the PHY management type. If auto is set and fixed-link
       is not specified, it uses MDIO for management.
+    $ref: /schemas/types.yaml#/definitions/string
+    default: auto
+    enum:
+      - auto
+      - in-band-status
 
   fixed-link:
-    allOf:
-      - if:
-          type: array
-        then:
-          deprecated: true
-          minItems: 1
-          maxItems: 1
-          items:
-            items:
-              - minimum: 0
-                maximum: 31
-                description:
-                  Emulated PHY ID, choose any but unique to the all
-                  specified fixed-links
-
-              - enum: [0, 1]
-                description:
-                  Duplex configuration. 0 for half duplex or 1 for
-                  full duplex
-
-              - enum: [10, 100, 1000]
-                description:
-                  Link speed in Mbits/sec.
-
-              - enum: [0, 1]
-                description:
-                  Pause configuration. 0 for no pause, 1 for pause
-
-              - enum: [0, 1]
-                description:
-                  Asymmetric pause configuration. 0 for no asymmetric
-                  pause, 1 for asymmetric pause
-
-
-      - if:
-          type: object
-        then:
-          properties:
-            speed:
-              allOf:
-                - $ref: /schemas/types.yaml#definitions/uint32
-                - enum: [10, 100, 1000]
-              description:
-                Link speed.
-
-            full-duplex:
-              $ref: /schemas/types.yaml#definitions/flag
-              description:
-                Indicates that full-duplex is used. When absent, half
-                duplex is assumed.
-
-            asym-pause:
-              $ref: /schemas/types.yaml#definitions/flag
-              description:
-                Indicates that asym_pause should be enabled.
-
-            link-gpios:
-              maxItems: 1
-              description:
-                GPIO to determine if the link is up
-
-          required:
-            - speed
+    oneOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+        deprecated: true
+        items:
+          - minimum: 0
+            maximum: 31
+            description:
+              Emulated PHY ID, choose any but unique to the all
+              specified fixed-links
+
+          - enum: [0, 1]
+            description:
+              Duplex configuration. 0 for half duplex or 1 for
+              full duplex
+
+          - enum: [10, 100, 1000, 2500, 10000]
+            description:
+              Link speed in Mbits/sec.
+
+          - enum: [0, 1]
+            description:
+              Pause configuration. 0 for no pause, 1 for pause
+
+          - enum: [0, 1]
+            description:
+              Asymmetric pause configuration. 0 for no asymmetric
+              pause, 1 for asymmetric pause
+      - type: object
+        additionalProperties: false
+        properties:
+          speed:
+            description:
+              Link speed.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [10, 100, 1000, 2500, 10000]
+
+          full-duplex:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Indicates that full-duplex is used. When absent, half
+              duplex is assumed.
+
+          pause:
+            $ref: /schemas/types.yaml#definitions/flag
+            description:
+              Indicates that pause should be enabled.
+
+          asym-pause:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Indicates that asym_pause should be enabled.
+
+          link-gpios:
+            maxItems: 1
+            description:
+              GPIO to determine if the link is up
+
+        required:
+          - speed
+
+allOf:
+  - if:
+      properties:
+        phy-mode:
+          contains:
+            enum:
+              - rgmii
+              - rgmii-rxid
+              - rgmii-txid
+              - rgmii-id
+    then:
+      properties:
+        rx-internal-delay-ps:
+          description:
+            RGMII Receive Clock Delay defined in pico seconds.This is used for
+            controllers that have configurable RX internal delays. If this
+            property is present then the MAC applies the RX delay.
+        tx-internal-delay-ps:
+          description:
+            RGMII Transmit Clock Delay defined in pico seconds.This is used for
+            controllers that have configurable TX internal delays. If this
+            property is present then the MAC applies the TX delay.
+
+additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 8927941c74bb..ad808e9ce5b9 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -45,6 +45,9 @@ properties:
           bits of a vendor specific ID.
       - items:
           - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+          - const: ethernet-phy-ieee802.3-c22
+      - items:
+          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
           - const: ethernet-phy-ieee802.3-c45
 
   reg:
@@ -74,57 +77,81 @@ properties:
     description:
       Maximum PHY supported speed in Mbits / seconds.
 
+  phy-10base-t1l-2.4vpp:
+    description: |
+      tristate, request/disable 2.4 Vpp operating mode. The values are:
+      0: Disable 2.4 Vpp operating mode.
+      1: Request 2.4 Vpp operating mode from link partner.
+      Absence of this property will leave configuration to default values.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum: [0, 1]
+
   broken-turn-around:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       If set, indicates the PHY device does not correctly release
-      the turn around line low at the end of a MDIO transaction.
+      the turn around line low at end of the control phase of the
+      MDIO transaction.
 
   enet-phy-lane-swap:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       If set, indicates the PHY will swap the TX/RX lanes to
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
   eee-broken-1000t:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
   eee-broken-10gt:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
   eee-broken-1000kx:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
   eee-broken-10gkx4:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
   eee-broken-10gkr:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
+  pses:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      Specifies a reference to a node representing a Power Sourcing Equipment.
+
   phy-is-integrated:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       If set, indicates that the PHY is integrated into the same
       physical package as the Ethernet MAC. If needed, muxers
@@ -154,13 +181,27 @@ properties:
       this property is missing the delay will be skipped.
 
   sfp:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Specifies a reference to a node representing a SFP cage.
 
+  rx-internal-delay-ps:
+    description: |
+      RGMII Receive PHY Clock Delay defined in pico seconds.  This is used for
+      PHY's that have configurable RX internal delays.  If this property is
+      present then the PHY applies the RX delay.
+
+  tx-internal-delay-ps:
+    description: |
+      RGMII Transmit PHY Clock Delay defined in pico seconds.  This is used for
+      PHY's that have configurable TX internal delays. If this property is
+      present then the PHY applies the TX delay.
+
 required:
   - reg
 
+additionalProperties: true
+
 examples:
   - |
     ethernet {
diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml
new file mode 100644
index 000000000000..e0f376f7e274
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -0,0 +1,260 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Fast Ethernet Controller (FEC)
+
+maintainers:
+  - Joakim Zhang <qiangqing.zhang@nxp.com>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx25-fec
+          - fsl,imx27-fec
+          - fsl,imx28-fec
+          - fsl,imx6q-fec
+          - fsl,mvf600-fec
+          - fsl,s32v234-fec
+      - items:
+          - enum:
+              - fsl,imx53-fec
+              - fsl,imx6sl-fec
+          - const: fsl,imx25-fec
+      - items:
+          - enum:
+              - fsl,imx35-fec
+              - fsl,imx51-fec
+          - const: fsl,imx27-fec
+      - items:
+          - enum:
+              - fsl,imx6ul-fec
+              - fsl,imx6sx-fec
+          - const: fsl,imx6q-fec
+      - items:
+          - enum:
+              - fsl,imx7d-fec
+          - const: fsl,imx6sx-fec
+      - items:
+          - const: fsl,imx8mq-fec
+          - const: fsl,imx6sx-fec
+      - items:
+          - enum:
+              - fsl,imx8mm-fec
+              - fsl,imx8mn-fec
+              - fsl,imx8mp-fec
+          - const: fsl,imx8mq-fec
+          - const: fsl,imx6sx-fec
+      - items:
+          - const: fsl,imx8qm-fec
+          - const: fsl,imx6sx-fec
+      - items:
+          - enum:
+              - fsl,imx8qxp-fec
+          - const: fsl,imx8qm-fec
+          - const: fsl,imx6sx-fec
+      - items:
+          - enum:
+              - fsl,imx8ulp-fec
+          - const: fsl,imx6ul-fec
+          - const: fsl,imx6q-fec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: int0
+      - items:
+          - const: int0
+          - const: pps
+      - items:
+          - const: int0
+          - const: int1
+          - const: int2
+      - items:
+          - const: int0
+          - const: int1
+          - const: int2
+          - const: pps
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+    description:
+      The "ipg", for MAC ipg_clk_s, ipg_clk_mac_s that are for register accessing.
+      The "ahb", for MAC ipg_clk, ipg_clk_mac that are bus clock.
+      The "ptp"(option), for IEEE1588 timer clock that requires the clock.
+      The "enet_clk_ref"(option), for MAC transmit/receiver reference clock like
+      RGMII TXC clock or RMII reference clock. It depends on board design,
+      the clock is required if RGMII TXC and RMII reference clock source from
+      SOC internal PLL.
+      The "enet_out"(option), output clock for external device, like supply clock
+      for PHY. The clock is required if PHY clock source from SOC.
+      The "enet_2x_txclk"(option), for RGMII sampling clock which fixed at 250Mhz.
+      The clock is required if SoC RGMII enable clock delay.
+
+  clock-names:
+    minItems: 2
+    maxItems: 5
+    items:
+      enum:
+        - ipg
+        - ahb
+        - ptp
+        - enet_clk_ref
+        - enet_out
+        - enet_2x_txclk
+
+  phy-mode: true
+
+  phy-handle: true
+
+  fixed-link: true
+
+  local-mac-address: true
+
+  mac-address: true
+
+  nvmem-cells: true
+
+  nvmem-cell-names: true
+
+  tx-internal-delay-ps:
+    enum: [0, 2000]
+
+  rx-internal-delay-ps:
+    enum: [0, 2000]
+
+  phy-supply:
+    description:
+      Regulator that powers the Ethernet PHY.
+
+  fsl,num-tx-queues:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The property is valid for enet-avb IP, which supports hw multi queues.
+      Should specify the tx queue number, otherwise set tx queue number to 1.
+    enum: [1, 2, 3]
+
+  fsl,num-rx-queues:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The property is valid for enet-avb IP, which supports hw multi queues.
+      Should specify the rx queue number, otherwise set rx queue number to 1.
+    enum: [1, 2, 3]
+
+  fsl,magic-packet:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present, indicates that the hardware supports waking up via magic packet.
+
+  fsl,err006687-workaround-present:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present indicates that the system has the hardware workaround for
+      ERR006687 applied and does not need a software workaround.
+
+  fsl,stop-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to general purpose register node
+          - description: the gpr register offset for ENET stop request
+          - description: the gpr bit offset for ENET stop request
+    description:
+      Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Specifies the mdio bus in the FEC, used as a container for phy nodes.
+
+  # Deprecated optional properties:
+  # To avoid these, create a phy node according to ethernet-phy.yaml in the same
+  # directory, and point the FEC's "phy-handle" property to it. Then use
+  # the phy's reset binding, again described by ethernet-phy.yaml.
+
+  phy-reset-gpios:
+    deprecated: true
+    description:
+      Should specify the gpio for phy reset.
+
+  phy-reset-duration:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Reset duration in milliseconds.  Should present only if property
+      "phy-reset-gpios" is available.  Missing the property will have the
+      duration be 1 millisecond.  Numbers greater than 1000 are invalid
+      and 1 millisecond will be used instead.
+
+  phy-reset-active-high:
+    type: boolean
+    deprecated: true
+    description:
+      If present then the reset sequence using the GPIO specified in the
+      "phy-reset-gpios" property is reversed (H=reset state, L=operation state).
+
+  phy-reset-post-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Post reset delay in milliseconds. If present then a delay of phy-reset-post-delay
+      milliseconds will be observed after the phy-reset-gpios has been toggled.
+      Can be omitted thus no delay is observed. Delay is in range of 1ms to 1000ms.
+      Other delays are invalid.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+# FIXME: We had better set additionalProperties to false to avoid invalid or at
+# least undocumented properties. However, PHY may have a deprecated option to
+# place PHY OF properties in the MAC node, such as Micrel PHY, and we can find
+# these boards which is based on i.MX6QDL.
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@83fec000 {
+      compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+      reg = <0x83fec000 0x4000>;
+      interrupts = <87>;
+      phy-mode = "mii";
+      phy-reset-gpios = <&gpio2 14 0>;
+      phy-supply = <&reg_fec_supply>;
+    };
+
+    ethernet@83fed000 {
+      compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+      reg = <0x83fed000 0x4000>;
+      interrupts = <87>;
+      phy-mode = "mii";
+      phy-reset-gpios = <&gpio2 14 0>;
+      phy-supply = <&reg_fec_supply>;
+      phy-handle = <&ethphy0>;
+
+      mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethphy0: ethernet-phy@0 {
+          compatible = "ethernet-phy-ieee802.3-c22";
+          reg = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
new file mode 100644
index 000000000000..3a35ac1c260d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman-dtsec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FMan MAC
+
+maintainers:
+  - Madalin Bucur <madalin.bucur@nxp.com>
+
+description: |
+  Each FMan has several MACs, each implementing an Ethernet interface. Earlier
+  versions of FMan used the Datapath Three Speed Ethernet Controller (dTSEC) for
+  10/100/1000 MBit/s speeds, and the 10-Gigabit Ethernet Media Access Controller
+  (10GEC) for 10 Gbit/s speeds. Later versions of FMan use the Multirate
+  Ethernet Media Access Controller (mEMAC) to handle all speeds.
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman-dtsec
+      - fsl,fman-xgec
+      - fsl,fman-memac
+
+  cell-index:
+    maximum: 64
+    description: |
+      FManV2:
+      register[bit]           MAC             cell-index
+      ============================================================
+      FM_EPI[16]              XGEC            8
+      FM_EPI[16+n]            dTSECn          n-1
+      FM_NPI[11+n]            dTSECn          n-1
+              n = 1,..,5
+
+      FManV3:
+      register[bit]           MAC             cell-index
+      ============================================================
+      FM_EPI[16+n]            mEMACn          n-1
+      FM_EPI[25]              mEMAC10         9
+
+      FM_NPI[11+n]            mEMACn          n-1
+      FM_NPI[10]              mEMAC10         9
+      FM_NPI[11]              mEMAC9          8
+              n = 1,..8
+
+      FM_EPI and FM_NPI are located in the FMan memory map.
+
+      2. SoC registers:
+
+      - P2041, P3041, P4080 P5020, P5040:
+      register[bit]           FMan            MAC             cell
+                              Unit                            index
+      ============================================================
+      DCFG_DEVDISR2[7]        1               XGEC            8
+      DCFG_DEVDISR2[7+n]      1               dTSECn          n-1
+      DCFG_DEVDISR2[15]       2               XGEC            8
+      DCFG_DEVDISR2[15+n]     2               dTSECn          n-1
+              n = 1,..5
+
+      - T1040, T2080, T4240, B4860:
+      register[bit]                   FMan    MAC             cell
+                                      Unit                    index
+      ============================================================
+      DCFG_CCSR_DEVDISR2[n-1]         1       mEMACn          n-1
+      DCFG_CCSR_DEVDISR2[11+n]        2       mEMACn          n-1
+              n = 1,..6,9,10
+
+      EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+      the specific SoC "Device Configuration/Pin Control" Memory
+      Map.
+
+  reg:
+    maxItems: 1
+
+  fsl,fman-ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 2
+    description: |
+      An array of two references: the first is the FMan RX port and the second
+      is the TX port used by this MAC.
+
+  ptp-timer:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A reference to the IEEE1588 timer
+
+  pcsphy-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A reference to the PCS (typically found on the SerDes)
+
+  tbi-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A reference to the (TBI-based) PCS
+
+required:
+  - compatible
+  - cell-index
+  - reg
+  - fsl,fman-ports
+  - ptp-timer
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,fman-dtsec
+    then:
+      required:
+        - tbi-handle
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,fman-memac
+    then:
+      required:
+        - pcsphy-handle
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@e0000 {
+            compatible = "fsl,fman-dtsec";
+            cell-index = <0>;
+            reg = <0xe0000 0x1000>;
+            fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
+            ptp-timer = <&ptp_timer>;
+            tbi-handle = <&tbi0>;
+    };
+  - |
+    ethernet@e8000 {
+            cell-index = <4>;
+            compatible = "fsl,fman-memac";
+            reg = <0xe8000 0x1000>;
+            fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+            ptp-timer = <&ptp_timer0>;
+            pcsphy-handle = <&pcsphy4>;
+            phy-handle = <&sgmii_phy1>;
+            phy-connection-type = "sgmii";
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
new file mode 100644
index 000000000000..7f620a71a972
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,qoriq-mc-dpmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DPAA2 MAC bindings
+
+maintainers:
+  - Ioana Ciornei <ioana.ciornei@nxp.com>
+
+description:
+  This binding represents the DPAA2 MAC objects found on the fsl-mc bus and
+  located under the 'dpmacs' node for the fsl-mc bus DTS node.
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+
+properties:
+  compatible:
+    const: fsl,qoriq-mc-dpmac
+
+  reg:
+    maxItems: 1
+    description: The DPMAC number
+
+  phy-handle: true
+
+  phy-connection-type: true
+
+  phy-mode: true
+
+  pcs-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A reference to a node representing a PCS PHY device found on
+      the internal MDIO bus.
+
+  managed: true
+
+required:
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dpmacs {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ethernet@4 {
+        compatible = "fsl,qoriq-mc-dpmac";
+        reg = <0x4>;
+        phy-handle = <&mdio1_phy6>;
+        phy-connection-type = "qsgmii";
+        managed = "in-band-status";
+        pcs-handle = <&pcs3_1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt
index b7034ccbc1bd..9b9a3f197e2d 100644
--- a/Documentation/devicetree/bindings/net/fsl-enetc.txt
+++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt
@@ -102,3 +102,18 @@ Example:
 			full-duplex;
 		};
 	};
+
+* Integrated Endpoint Register Block bindings
+
+Optionally, the fsl_enetc driver can probe on the Integrated Endpoint Register
+Block, which preconfigures the FIFO limits for the ENETC ports. This is a node
+with the following properties:
+
+- reg		: Specifies the address in the SoC memory space.
+- compatible	: Must be "fsl,ls1028a-enetc-ierb".
+
+Example:
+	ierb@1f0800000 {
+		compatible = "fsl,ls1028a-enetc-ierb";
+		reg = <0x01 0xf0800000 0x0 0x10000>;
+	};
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
deleted file mode 100644
index 5b88fae0307d..000000000000
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-* Freescale Fast Ethernet Controller (FEC)
-
-Required properties:
-- compatible : Should be "fsl,<soc>-fec"
-- reg : Address and length of the register set for the device
-- interrupts : Should contain fec interrupt
-- phy-mode : See ethernet.txt file in the same directory
-
-Optional properties:
-- phy-supply : regulator that powers the Ethernet PHY.
-- phy-handle : phandle to the PHY device connected to this device.
-- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
-  Use instead of phy-handle.
-- fsl,num-tx-queues : The property is valid for enet-avb IP, which supports
-  hw multi queues. Should specify the tx queue number, otherwise set tx queue
-  number to 1.
-- fsl,num-rx-queues : The property is valid for enet-avb IP, which supports
-  hw multi queues. Should specify the rx queue number, otherwise set rx queue
-  number to 1.
-- fsl,magic-packet : If present, indicates that the hardware supports waking
-  up via magic packet.
-- fsl,err006687-workaround-present: If present indicates that the system has
-  the hardware workaround for ERR006687 applied and does not need a software
-  workaround.
- -interrupt-names:  names of the interrupts listed in interrupts property in
-  the same order. The defaults if not specified are
-  __Number of interrupts__   __Default__
-	1			"int0"
-	2			"int0", "pps"
-	3			"int0", "int1", "int2"
-	4			"int0", "int1", "int2", "pps"
-  The order may be changed as long as they correspond to the interrupts
-  property. Currently, only i.mx7 uses "int1" and "int2". They correspond to
-  tx/rx queues 1 and 2. "int0" will be used for queue 0 and ENET_MII interrupts.
-  For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse
-  per second interrupt associated with 1588 precision time protocol(PTP).
-
-Optional subnodes:
-- mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
-  according to phy.txt in the same directory
-
-Deprecated optional properties:
-	To avoid these, create a phy node according to phy.txt in the same
-	directory, and point the fec's "phy-handle" property to it. Then use
-	the phy's reset binding, again described by phy.txt.
-- phy-reset-gpios : Should specify the gpio for phy reset
-- phy-reset-duration : Reset duration in milliseconds.  Should present
-  only if property "phy-reset-gpios" is available.  Missing the property
-  will have the duration be 1 millisecond.  Numbers greater than 1000 are
-  invalid and 1 millisecond will be used instead.
-- phy-reset-active-high : If present then the reset sequence using the GPIO
-  specified in the "phy-reset-gpios" property is reversed (H=reset state,
-  L=operation state).
-- phy-reset-post-delay : Post reset delay in milliseconds. If present then
-  a delay of phy-reset-post-delay milliseconds will be observed after the
-  phy-reset-gpios has been toggled. Can be omitted thus no delay is
-  observed. Delay is in range of 1ms to 1000ms. Other delays are invalid.
-
-Example:
-
-ethernet@83fec000 {
-	compatible = "fsl,imx51-fec", "fsl,imx27-fec";
-	reg = <0x83fec000 0x4000>;
-	interrupts = <87>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; /* GPIO2_14 */
-	local-mac-address = [00 04 9F 01 1B B9];
-	phy-supply = <&reg_fec_supply>;
-};
-
-Example with phy specified:
-
-ethernet@83fec000 {
-	compatible = "fsl,imx51-fec", "fsl,imx27-fec";
-	reg = <0x83fec000 0x4000>;
-	interrupts = <87>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; /* GPIO2_14 */
-	local-mac-address = [00 04 9F 01 1B B9];
-	phy-supply = <&reg_fec_supply>;
-	phy-handle = <&ethphy>;
-	mdio {
-		ethphy: ethernet-phy@6 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <6>;
-			max-speed = <100>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt
index c00fb0d22c7b..b9055335db3b 100644
--- a/Documentation/devicetree/bindings/net/fsl-fman.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fman.txt
@@ -232,133 +232,7 @@ port@81000 {
 =============================================================================
 FMan dTSEC/XGEC/mEMAC Node
 
-DESCRIPTION
-
-mEMAC/dTSEC/XGEC are the Ethernet network interfaces
-
-PROPERTIES
-
-- compatible
-		Usage: required
-		Value type: <stringlist>
-		Definition: A standard property.
-		Must include one of the following:
-		- "fsl,fman-dtsec" for dTSEC MAC
-		- "fsl,fman-xgec" for XGEC MAC
-		- "fsl,fman-memac" for mEMAC MAC
-
-- cell-index
-		Usage: required
-		Value type: <u32>
-		Definition: Specifies the MAC id.
-
-		The cell-index value may be used by the FMan or the SoC, to
-		identify the MAC unit in the FMan (or SoC) memory map.
-		In the tables below there's a description of the cell-index
-		use, there are two tables, one describes the use of cell-index
-		by the FMan, the second describes the use by the SoC:
-
-		1. FMan Registers
-
-		FManV2:
-		register[bit]		MAC		cell-index
-		============================================================
-		FM_EPI[16]		XGEC		8
-		FM_EPI[16+n]		dTSECn		n-1
-		FM_NPI[11+n]		dTSECn		n-1
-			n = 1,..,5
-
-		FManV3:
-		register[bit]		MAC		cell-index
-		============================================================
-		FM_EPI[16+n]		mEMACn		n-1
-		FM_EPI[25]		mEMAC10		9
-
-		FM_NPI[11+n]		mEMACn		n-1
-		FM_NPI[10]		mEMAC10		9
-		FM_NPI[11]		mEMAC9		8
-			n = 1,..8
-
-		FM_EPI and FM_NPI are located in the FMan memory map.
-
-		2. SoC registers:
-
-		- P2041, P3041, P4080 P5020, P5040:
-		register[bit]		FMan		MAC		cell
-					Unit				index
-		============================================================
-		DCFG_DEVDISR2[7]	1		XGEC		8
-		DCFG_DEVDISR2[7+n]	1		dTSECn		n-1
-		DCFG_DEVDISR2[15]	2		XGEC		8
-		DCFG_DEVDISR2[15+n]	2		dTSECn		n-1
-			n = 1,..5
-
-		- T1040, T2080, T4240, B4860:
-		register[bit]			FMan	MAC		cell
-						Unit			index
-		============================================================
-		DCFG_CCSR_DEVDISR2[n-1]		1	mEMACn		n-1
-		DCFG_CCSR_DEVDISR2[11+n]	2	mEMACn		n-1
-			n = 1,..6,9,10
-
-		EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
-		the specific SoC "Device Configuration/Pin Control" Memory
-		Map.
-
-- reg
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: A standard property.
-
-- fsl,fman-ports
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: An array of two phandles - the first references is
-		the FMan RX port and the second is the TX port used by this
-		MAC.
-
-- ptp-timer
-		Usage required
-		Value type: <phandle>
-		Definition: A phandle for 1EEE1588 timer.
-
-- pcsphy-handle
-		Usage required for "fsl,fman-memac" MACs
-		Value type: <phandle>
-		Definition: A phandle for pcsphy.
-
-- tbi-handle
-		Usage required for "fsl,fman-dtsec" MACs
-		Value type: <phandle>
-		Definition: A phandle for tbiphy.
-
-EXAMPLE
-
-fman1_tx28: port@a8000 {
-	cell-index = <0x28>;
-	compatible = "fsl,fman-v2-port-tx";
-	reg = <0xa8000 0x1000>;
-};
-
-fman1_rx8: port@88000 {
-	cell-index = <0x8>;
-	compatible = "fsl,fman-v2-port-rx";
-	reg = <0x88000 0x1000>;
-};
-
-ptp-timer: ptp_timer@fe000 {
-	compatible = "fsl,fman-ptp-timer";
-	reg = <0xfe000 0x1000>;
-};
-
-ethernet@e0000 {
-	compatible = "fsl,fman-dtsec";
-	cell-index = <0>;
-	reg = <0xe0000 0x1000>;
-	fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
-	ptp-timer = <&ptp-timer>;
-	tbi-handle = <&tbi0>;
-};
+Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
 
 ============================================================================
 FMan IEEE 1588 Node
@@ -388,14 +262,24 @@ PROPERTIES
 		Value type: <prop-encoded-array>
 		Definition: A standard property.
 
-- bus-frequency
+- clocks
+		Usage: optional
+		Value type: <phandle>
+		Definition: A reference to the input clock of the controller
+		from which the MDC frequency is derived.
+
+- clock-frequency
 		Usage: optional
 		Value type: <u32>
-		Definition: Specifies the external MDIO bus clock speed to
-		be used, if different from the standard 2.5 MHz.
-		This may be due to the standard speed being unsupported (e.g.
-		due to a hardware problem), or to advertise that all relevant
-		components in the system support a faster speed.
+		Definition: Specifies the external MDC frequency, in Hertz, to
+		be used. Requires that the input clock is specified in the
+		"clocks" property. See also: mdio.yaml.
+
+- suppress-preamble
+		Usage: optional
+		Value type: <boolean>
+		Definition: Disable generation of preamble bits. See also:
+		mdio.yaml.
 
 - interrupts
 		Usage: required for external MDIO
@@ -410,6 +294,15 @@ PROPERTIES
 		The settings and programming routines for internal/external
 		MDIO are different. Must be included for internal MDIO.
 
+- fsl,erratum-a009885
+		Usage: optional
+		Value type: <boolean>
+		Definition: Indicates the presence of the A009885
+		erratum describing that the contents of MDIO_DATA may
+		become corrupt unless it is read within 16 MDC cycles
+		of MDIO_CFG[BSY] being cleared, when performing an
+		MDIO read operation.
+
 - fsl,erratum-a011043
 		Usage: optional
 		Value type: <boolean>
diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt
index f878c1103463..29234021f601 100644
--- a/Documentation/devicetree/bindings/net/ftgmac100.txt
+++ b/Documentation/devicetree/bindings/net/ftgmac100.txt
@@ -15,6 +15,7 @@ Required properties:
 - interrupts: Should contain ethernet controller interrupt
 
 Optional properties:
+- phy-handle: See ethernet.txt file in the same directory.
 - phy-mode: See ethernet.txt file in the same directory. If the property is
   absent, "rgmii" is assumed. Supported values are "rgmii*" and "rmii" for
   aspeed parts. Other (unknown) parts will accept any value.
@@ -32,6 +33,9 @@ Optional properties:
       - "MACCLK": The MAC IP clock
       - "RCLK": Clock gate for the RMII RCLK
 
+Optional subnodes:
+- mdio: See mdio.txt file in the same directory.
+
 Example:
 
 	mac0: ethernet@1e660000 {
@@ -40,3 +44,24 @@ Example:
 		interrupts = <2>;
 		use-ncsi;
 	};
+
+Example with phy-handle:
+
+	mac1: ethernet@1e680000 {
+		compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+		reg = <0x1e680000 0x180>;
+		interrupts = <2>;
+
+		phy-handle = <&phy>;
+		phy-mode = "rgmii";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy: ethernet-phy@1 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt
deleted file mode 100644
index f7da3d73ca1b..000000000000
--- a/Documentation/devicetree/bindings/net/gpmc-eth.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-Device tree bindings for Ethernet chip connected to TI GPMC
-
-Besides being used to interface with external memory devices, the
-General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices
-such as ethernet controllers to processors using the TI GPMC as a data bus.
-
-Ethernet controllers connected to TI GPMC are represented as child nodes of
-the GPMC controller with an "ethernet" name.
-
-All timing relevant properties as well as generic GPMC child properties are
-explained in a separate documents. Please refer to
-Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
-
-For the properties relevant to the ethernet controller connected to the GPMC
-refer to the binding documentation of the device. For example, the documentation
-for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt
-
-Child nodes need to specify the GPMC bus address width using the "bank-width"
-property but is possible that an ethernet controller also has a property to
-specify the I/O registers address width. Even when the GPMC has a maximum 16-bit
-address width, it supports devices with 32-bit word registers.
-For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an
-OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;".
-
-Required properties:
-- bank-width: 		Address width of the device in bytes. GPMC supports 8-bit
-			and 16-bit devices and so must be either 1 or 2 bytes.
-- compatible:		Compatible string property for the ethernet child device.
-- gpmc,cs-on-ns:	Chip-select assertion time
-- gpmc,cs-rd-off-ns:	Chip-select de-assertion time for reads
-- gpmc,cs-wr-off-ns:	Chip-select de-assertion time for writes
-- gpmc,oe-on-ns:	Output-enable assertion time
-- gpmc,oe-off-ns:	Output-enable de-assertion time
-- gpmc,we-on-ns:	Write-enable assertion time
-- gpmc,we-off-ns:	Write-enable de-assertion time
-- gpmc,access-ns:	Start cycle to first data capture (read access)
-- gpmc,rd-cycle-ns:	Total read cycle time
-- gpmc,wr-cycle-ns:	Total write cycle time
-- reg:			Chip-select, base address (relative to chip-select)
-			and size of the memory mapped for the device.
-			Note that base address will be typically 0 as this
-			is the start of the chip-select.
-
-Optional properties:
-- gpmc,XXX		Additional GPMC timings and settings parameters. See
-			Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
-
-Example:
-
-gpmc: gpmc@6e000000 {
-	compatible = "ti,omap3430-gpmc";
-	ti,hwmods = "gpmc";
-	reg = <0x6e000000 0x1000>;
-	interrupts = <20>;
-	gpmc,num-cs = <8>;
-	gpmc,num-waitpins = <4>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-
-	ranges = <5 0 0x2c000000 0x1000000>;
-
-	ethernet@5,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		reg = <5 0 0xff>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <16>;
-		vmmc-supply = <&vddvario>;
-		vmmc_aux-supply = <&vdd33a>;
-		reg-io-width = <4>;
-
-		smsc,save-mac-address;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml b/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml
new file mode 100644
index 000000000000..11ffc306dd54
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/idt,3243x-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT 79rc3243x Ethernet controller
+
+description: Ethernet controller integrated into IDT 79RC3243x family SoCs
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: idt,3243x-emac
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: emac
+      - const: dma_rx
+      - const: dma_tx
+
+  interrupts:
+    items:
+      - description: RX interrupt
+      - description: TX interrupt
+
+  interrupt-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mdioclk
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+
+    ethernet@60000 {
+        compatible = "idt,3243x-emac";
+
+        reg = <0x60000 0x10000>,
+              <0x40000 0x14>,
+              <0x40014 0x14>;
+        reg-names = "emac", "dma_rx", "dma_tx";
+
+        interrupt-parent = <&rcpic3>;
+        interrupts = <0>, <1>;
+        interrupt-names = "rx", "tx";
+
+        clocks = <&iclk>;
+        clock-names = "mdioclk";
+    };
diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
new file mode 100644
index 000000000000..93b3e991d209
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ingenic,mac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for MAC in Ingenic SoCs
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+  The Ethernet Media Access Controller in Ingenic SoCs.
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4775-mac
+      - ingenic,x1000-mac
+      - ingenic,x1600-mac
+      - ingenic,x1830-mac
+      - ingenic,x2000-mac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: macirq
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: stmmaceth
+
+  mode-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: An extra syscon register that control ethernet interface and timing delay
+
+  rx-clk-delay-ps:
+    description: RGMII receive clock delay defined in pico seconds
+
+  tx-clk-delay-ps:
+    description: RGMII transmit clock delay defined in pico seconds
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - mode-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,x1000-cgu.h>
+
+    mac: ethernet@134b0000 {
+        compatible = "ingenic,x1000-mac";
+        reg = <0x134b0000 0x2000>;
+
+        interrupt-parent = <&intc>;
+        interrupts = <55>;
+        interrupt-names = "macirq";
+
+        clocks = <&cgu X1000_CLK_MAC>;
+        clock-names = "stmmaceth";
+
+        mode-reg = <&mac_phy_ctrl>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
new file mode 100644
index 000000000000..d23fa3771210
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/intel,dwmac-plat.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel DWMAC glue layer
+
+maintainers:
+  - Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - intel,keembay-dwmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - intel,keembay-dwmac
+          - const: snps,dwmac-4.10a
+
+  clocks:
+    items:
+      - description: GMAC main clock
+      - description: PTP reference clock
+      - description: Tx clock
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: ptp_ref
+      - const: tx_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+# FIXME: Remove defines and include the correct header file
+# once it is available in mainline.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #define MOVISOC_KMB_PSS_GBE
+    #define MOVISOC_KMB_PSS_AUX_GBE_PTP
+    #define MOVISOC_KMB_PSS_AUX_GBE_TX
+
+    stmmac_axi_setup: stmmac-axi-config {
+        snps,lpi_en;
+        snps,wr_osr_lmt = <0x0>;
+        snps,rd_osr_lmt = <0x2>;
+        snps,blen = <0 0 0 0 16 8 4>;
+    };
+
+    mtl_rx_setup: rx-queues-config {
+        snps,rx-queues-to-use = <2>;
+        snps,rx-sched-sp;
+        queue0 {
+            snps,dcb-algorithm;
+            snps,map-to-dma-channel = <0x0>;
+            snps,priority = <0x0>;
+        };
+
+        queue1 {
+            snps,dcb-algorithm;
+            snps,map-to-dma-channel = <0x1>;
+            snps,priority = <0x1>;
+        };
+    };
+
+    mtl_tx_setup: tx-queues-config {
+        snps,tx-queues-to-use = <2>;
+        snps,tx-sched-wrr;
+        queue0 {
+           snps,weight = <0x10>;
+           snps,dcb-algorithm;
+           snps,priority = <0x0>;
+        };
+
+        queue1 {
+            snps,weight = <0x10>;
+            snps,dcb-algorithm;
+            snps,priority = <0x1>;
+        };
+    };
+
+    gmac0: ethernet@3a000000 {
+        compatible = "intel,keembay-dwmac", "snps,dwmac-4.10a";
+        interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq";
+        reg = <0x3a000000 0x8000>;
+        snps,perfect-filter-entries = <128>;
+        phy-handle = <&eth_phy0>;
+        phy-mode = "rgmii";
+        rx-fifo-depth = <4096>;
+        tx-fifo-depth = <4096>;
+        clock-names = "stmmaceth", "ptp_ref", "tx_clk";
+        clocks = <&scmi_clk MOVISOC_KMB_PSS_GBE>,
+                 <&scmi_clk MOVISOC_KMB_PSS_AUX_GBE_PTP>,
+                 <&scmi_clk MOVISOC_KMB_PSS_AUX_GBE_TX>;
+        snps,pbl = <0x4>;
+        snps,axi-config = <&stmmac_axi_setup>;
+        snps,mtl-rx-config = <&mtl_rx_setup>;
+        snps,mtl-tx-config = <&mtl_tx_setup>;
+        snps,tso;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "snps,dwmac-mdio";
+
+            ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml b/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml
new file mode 100644
index 000000000000..8b9b3f915d92
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/intel,ixp46x-ptp-timer.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP46x PTP Timer (TSYNC)
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Intel IXP46x PTP timer is known in the manual as IEEE1588 Hardware
+  Assist and Time Synchronization Hardware Assist TSYNC provides a PTP
+  timer. It exists in the Intel IXP45x and IXP46x XScale SoCs.
+
+properties:
+  compatible:
+    const: intel,ixp46x-ptp-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Interrupt to trigger master mode snapshot from the
+          PRP timer, usually a GPIO interrupt.
+      - description: Interrupt to trigger slave mode snapshot from the
+          PRP timer, usually a GPIO interrupt.
+
+  interrupt-names:
+    items:
+      - const: master
+      - const: slave
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    ptp-timer@c8010000 {
+        compatible = "intel,ixp46x-ptp-timer";
+        reg = <0xc8010000 0x1000>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "master", "slave";
+    };
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
new file mode 100644
index 000000000000..4e1b79818aff
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx ethernet
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Intel IXP4xx ethernet makes use of the IXP4xx NPE (Network
+  Processing Engine) and the IXP4xx Queue Manager to process
+  the ethernet frames. It can optionally contain an MDIO bus to
+  talk to PHYs.
+
+properties:
+  compatible:
+    const: intel,ixp4xx-ethernet
+
+  reg:
+    maxItems: 1
+    description: Ethernet MMIO address range
+
+  queue-rx:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      - items:
+          - description: phandle to the RX queue node
+          - description: RX queue instance to use
+    description: phandle to the RX queue on the NPE
+
+  queue-txready:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      - items:
+          - description: phandle to the TX READY queue node
+          - description: TX READY queue instance to use
+    description: phandle to the TX READY queue on the NPE
+
+  phy-mode: true
+
+  phy-handle: true
+
+  intel,npe-handle:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      - items:
+          - description: phandle to the NPE this ethernet instance is using
+          - description: the NPE instance to use
+    description: phandle to the NPE this ethernet instance is using
+      and the instance to use in the second cell
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description: optional node for embedded MDIO controller
+
+required:
+  - compatible
+  - reg
+  - queue-rx
+  - queue-txready
+  - intel,npe-handle
+
+additionalProperties: false
+
+examples:
+  - |
+    npe: npe@c8006000 {
+      compatible = "intel,ixp4xx-network-processing-engine";
+      reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+    };
+
+    ethernet@c8009000 {
+      compatible = "intel,ixp4xx-ethernet";
+      reg = <0xc8009000 0x1000>;
+      queue-rx = <&qmgr 4>;
+      queue-txready = <&qmgr 21>;
+      intel,npe-handle = <&npe 1>;
+      phy-mode = "rgmii";
+      phy-handle = <&phy1>;
+    };
+
+    ethernet@c800c000 {
+      compatible = "intel,ixp4xx-ethernet";
+      reg = <0xc800c000 0x1000>;
+      queue-rx = <&qmgr 3>;
+      queue-txready = <&qmgr 20>;
+      intel,npe-handle = <&npe 2>;
+      phy-mode = "rgmii";
+      phy-handle = <&phy2>;
+
+      mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phy1: ethernet-phy@1 {
+          reg = <1>;
+        };
+        phy2: ethernet-phy@2 {
+          reg = <2>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml
new file mode 100644
index 000000000000..e6329febb60c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2021 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/intel,ixp4xx-hss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx V.35 WAN High Speed Serial Link (HSS)
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Intel IXP4xx HSS makes use of the IXP4xx NPE (Network
+  Processing Engine) and the IXP4xx Queue Manager to process
+  V.35 Wideband Modem (WAN) links.
+
+properties:
+  compatible:
+    const: intel,ixp4xx-hss
+
+  reg:
+    maxItems: 1
+    description: The HSS instance
+
+  intel,npe-handle:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      items:
+        - description: phandle to the NPE this HSS instance is using
+        - description: the NPE instance number
+    description: phandle to the NPE this HSS instance is using
+      and the instance to use in the second cell
+
+  intel,queue-chl-rxtrig:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      - items:
+          - description: phandle to the RX trigger queue on the NPE
+          - description: the queue instance number
+    description: phandle to the RX trigger queue on the NPE
+
+  intel,queue-chl-txready:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      - items:
+          - description: phandle to the TX ready queue on the NPE
+          - description: the queue instance number
+    description: phandle to the TX ready queue on the NPE
+
+  intel,queue-pkt-rx:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      - items:
+          - description: phandle to the RX queue on the NPE
+          - description: the queue instance number
+    description: phandle to the packet RX queue on the NPE
+
+  intel,queue-pkt-tx:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 4
+    items:
+      items:
+        - description: phandle to the TX queue on the NPE
+        - description: the queue instance number
+    description: phandle to the packet TX0, TX1, TX2 and TX3 queues on the NPE
+
+  intel,queue-pkt-rxfree:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 4
+    items:
+      items:
+        - description: phandle to the RXFREE queue on the NPE
+        - description: the queue instance number
+    description: phandle to the packet RXFREE0, RXFREE1, RXFREE2 and
+      RXFREE3 queues on the NPE
+
+  intel,queue-pkt-txdone:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      - items:
+          - description: phandle to the TXDONE queue on the NPE
+          - description: the queue instance number
+    description: phandle to the packet TXDONE queue on the NPE
+
+  cts-gpios:
+    maxItems: 1
+    description: Clear To Send (CTS) GPIO line
+
+  rts-gpios:
+    maxItems: 1
+    description: Ready To Send (RTS) GPIO line
+
+  dcd-gpios:
+    maxItems: 1
+    description: Data Carrier Detect (DCD) GPIO line
+
+  dtr-gpios:
+    maxItems: 1
+    description: Data Terminal Ready (DTR) GPIO line
+
+  clk-internal-gpios:
+    maxItems: 1
+    description: Clock internal GPIO line, driving this high will make the HSS
+      use internal clocking as opposed to external clocking
+
+required:
+  - compatible
+  - reg
+  - intel,npe-handle
+  - intel,queue-chl-rxtrig
+  - intel,queue-chl-txready
+  - intel,queue-pkt-rx
+  - intel,queue-pkt-tx
+  - intel,queue-pkt-rxfree
+  - intel,queue-pkt-txdone
+  - cts-gpios
+  - rts-gpios
+  - dcd-gpios
+  - dtr-gpios
+  - clk-internal-gpios
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml
new file mode 100644
index 000000000000..3ce9f9a16baf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq Xway ETOP Ethernet driver
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  $nodename:
+    pattern: "^ethernet@[0-9a-f]+$"
+
+  compatible:
+    const: lantiq,etop-xway
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: TX interrupt
+      - description: RX interrupt
+
+  interrupt-names:
+    items:
+      - const: tx
+      - const: rx
+
+  lantiq,tx-burst-length:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      TX programmable burst length.
+    enum: [2, 4, 8]
+
+  lantiq,rx-burst-length:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RX programmable burst length.
+    enum: [2, 4, 8]
+
+  phy-mode: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - lantiq,tx-burst-length
+  - lantiq,rx-burst-length
+  - phy-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    ethernet@e180000 {
+        compatible = "lantiq,etop-xway";
+        reg = <0xe180000 0x40000>;
+        interrupt-parent = <&icu0>;
+        interrupts = <73>, <78>;
+        interrupt-names = "tx", "rx";
+        lantiq,tx-burst-length = <8>;
+        lantiq,rx-burst-length = <8>;
+        phy-mode = "rmii";
+    };
diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
deleted file mode 100644
index 5ff5e68bbbb6..000000000000
--- a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Lantiq xRX200 GSWIP PMAC Ethernet driver
-==================================
-
-Required properties:
-
-- compatible	: "lantiq,xrx200-net" for the PMAC of the embedded
-		: GSWIP in the xXR200
-- reg		: memory range of the PMAC core inside of the GSWIP core
-- interrupts	: TX and RX DMA interrupts. Use interrupt-names "tx" for
-		: the TX interrupt and "rx" for the RX interrupt.
-
-Example:
-
-ethernet@e10b308 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "lantiq,xrx200-net";
-	reg = <0xe10b308 0xcf8>;
-	interrupts = <73>, <72>;
-	interrupt-names = "tx", "rx";
-};
diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
new file mode 100644
index 000000000000..5bc1a21ca579
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/lantiq,xrx200-net.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq xRX200 GSWIP PMAC Ethernet driver
+
+maintainers:
+  - Hauke Mehrtens <hauke@hauke-m.de>
+
+properties:
+  $nodename:
+    pattern: "^ethernet@[0-9a-f]+$"
+
+  compatible:
+    const: lantiq,xrx200-net
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: TX interrupt
+      - description: RX interrupt
+
+  interrupt-names:
+    items:
+      - const: tx
+      - const: rx
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    ethernet@e10b308 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "lantiq,xrx200-net";
+        reg = <0xe10b308 0xcf8>;
+        interrupt-parent = <&icu0>;
+        interrupts = <73>, <72>;
+        interrupt-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/net/litex,liteeth.yaml b/Documentation/devicetree/bindings/net/litex,liteeth.yaml
new file mode 100644
index 000000000000..ebf4e360f8dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/litex,liteeth.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/litex,liteeth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteX LiteETH ethernet device
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+description: |
+  LiteETH is a small footprint and configurable Ethernet core for FPGA based
+  system on chips.
+
+  The hardware source is Open Source and can be found on at
+  https://github.com/enjoy-digital/liteeth/.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: litex,liteeth
+
+  reg:
+    items:
+      - description: MAC registers
+      - description: MDIO registers
+      - description: Packet buffer
+
+  reg-names:
+    items:
+      - const: mac
+      - const: mdio
+      - const: buffer
+
+  interrupts:
+    maxItems: 1
+
+  litex,rx-slots:
+    description: Number of slots in the receive buffer
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    default: 2
+
+  litex,tx-slots:
+    description: Number of slots in the transmit buffer
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    default: 2
+
+  litex,slot-size:
+    description: Size in bytes of a slot in the tx/rx buffer
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x800
+    default: 0x800
+
+  mac-address: true
+  local-mac-address: true
+  phy-handle: true
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    mac: ethernet@8020000 {
+        compatible = "litex,liteeth";
+        reg = <0x8021000 0x100>,
+              <0x8020800 0x100>,
+              <0x8030000 0x2000>;
+        reg-names = "mac", "mdio", "buffer";
+        litex,rx-slots = <2>;
+        litex,tx-slots = <2>;
+        litex,slot-size = <0x800>;
+        interrupts = <0x11 0x1>;
+        phy-handle = <&eth_phy>;
+
+        mdio {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          eth_phy: ethernet-phy@0 {
+            reg = <0>;
+          };
+        };
+    };
+...
+
+#  vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
deleted file mode 100644
index 0b61a90f1592..000000000000
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Cadence MACB/GEM Ethernet controller
-
-Required properties:
-- compatible: Should be "cdns,[<chip>-]{macb|gem}"
-  Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
-  Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs.
-  Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC.
-  Use "cdns,np4-macb" for NP4 SoC devices.
-  Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
-  Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
-  the Cadence GEM, or the generic form: "cdns,gem".
-  Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
-  Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs.
-  Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
-  Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
-  Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
-  Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC.
-  Use "sifive,fu540-c000-gem" for SiFive FU540-C000 SoC.
-  Or the generic form: "cdns,emac".
-- reg: Address and length of the register set for the device
-	For "sifive,fu540-c000-gem", second range is required to specify the
-	address and length of the registers for GEMGXL Management block.
-- interrupts: Should contain macb interrupt
-- phy-mode: See ethernet.txt file in the same directory.
-- clock-names: Tuple listing input clock names.
-	Required elements: 'pclk', 'hclk'
-	Optional elements: 'tx_clk'
-	Optional elements: 'rx_clk' applies to cdns,zynqmp-gem
-	Optional elements: 'tsu_clk'
-- clocks: Phandles to input clocks.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Optional properties for PHY child node:
-- reset-gpios : Should specify the gpio for phy reset
-- magic-packet : If present, indicates that the hardware supports waking
-  up via magic packet.
-- phy-handle : see ethernet.txt file in the same directory
-
-Examples:
-
-	macb0: ethernet@fffc4000 {
-		compatible = "cdns,at32ap7000-macb";
-		reg = <0xfffc4000 0x4000>;
-		interrupts = <21>;
-		phy-mode = "rmii";
-		local-mac-address = [3a 0e 03 04 05 06];
-		clock-names = "pclk", "hclk", "tx_clk";
-		clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
-		ethernet-phy@1 {
-			reg = <0x1>;
-			reset-gpios = <&pioE 6 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
new file mode 100644
index 000000000000..8e288ab38fd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,mvusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell USB to MDIO Controller
+
+maintainers:
+  - Tobias Waldekranz <tobias@waldekranz.com>
+
+description: |+
+  This controller is mounted on development boards for Marvell's Link Street
+  family of Ethernet switches. It allows you to configure the switch's registers
+  using the standard MDIO interface.
+
+  Since the device is connected over USB, there is no strict requirement of
+  having a device tree representation of the device. But in order to use it with
+  the mv88e6xxx driver, you need a device tree node in which to place the switch
+  definition.
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    const: usb1286,1fa4
+  reg:
+    maxItems: 1
+    description: The USB port number on the host controller
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* USB host controller */
+    usb {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mdio@1 {
+                    compatible = "usb1286,1fa4";
+                    reg = <1>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    switch@0 {
+                            compatible = "marvell,mv88e6190";
+                            reg = <0x0>;
+
+                            ports {
+                                    /* Port definitions */
+                            };
+
+                            mdio {
+                                    /* PHY definitions */
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
new file mode 100644
index 000000000000..d2906b4a0f59
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,orion-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MDIO Ethernet Controller interface
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description: |
+  The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, MV78xx0,
+  Armada 370, Armada XP, Armada 7k and Armada 8k have an identical unit that
+  provides an interface with the MDIO bus. Additionally, Armada 7k and Armada
+  8k has a second unit which provides an interface with the xMDIO bus. This
+  driver handles these interfaces.
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - marvell,orion-mdio
+      - marvell,xmdio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@d0072004 {
+      compatible = "marvell,orion-mdio";
+      reg = <0xd0072004 0x4>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <30>;
+
+      phy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+
+      phy1: ethernet-phy@1 {
+        reg = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
index 83370ebf5b89..e28938ddfdf5 100644
--- a/Documentation/devicetree/bindings/net/marvell,prestera.txt
+++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt
@@ -45,3 +45,37 @@ dfx-server {
 	ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
 	reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
 };
+
+Marvell Prestera SwitchDev bindings
+-----------------------------------
+Optional properties:
+- compatible: must be "marvell,prestera"
+- base-mac-provider: describes handle to node which provides base mac address,
+	might be a static base mac address or nvme cell provider.
+
+Example:
+
+eeprom_mac_addr: eeprom-mac-addr {
+       compatible = "eeprom,mac-addr-cell";
+       status = "okay";
+
+       nvmem = <&eeprom_at24>;
+};
+
+prestera {
+       compatible = "marvell,prestera";
+       status = "okay";
+
+       base-mac-provider = <&eeprom_mac_addr>;
+};
+
+The current implementation of Prestera Switchdev PCI interface driver requires
+that BAR2 is assigned to 0xf6000000 as base address from the PCI IO range:
+
+&cp0_pcie0 {
+	ranges = <0x81000000 0x0 0xfb000000 0x0 0xfb000000 0x0 0xf0000
+		0x82000000 0x0 0xf6000000 0x0 0xf6000000 0x0 0x2000000
+		0x82000000 0x0 0xf9000000 0x0 0xf9000000 0x0 0x100000>;
+	phys = <&cp0_comphy0 0>;
+	status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index 691f886cfc4a..2bf31572b08d 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -5,6 +5,7 @@ Required properties:
 	"marvell,armada-370-neta"
 	"marvell,armada-xp-neta"
 	"marvell,armada-3700-neta"
+	"marvell,armada-ac5-neta"
 - reg: address and length of the register set for the device.
 - interrupts: interrupt for the device
 - phy: See ethernet.txt file in the same directory.
diff --git a/Documentation/devicetree/bindings/net/marvell-bluetooth.txt b/Documentation/devicetree/bindings/net/marvell-bluetooth.txt
deleted file mode 100644
index 0e2842296032..000000000000
--- a/Documentation/devicetree/bindings/net/marvell-bluetooth.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Marvell Bluetooth Chips
------------------------
-
-This documents the binding structure and common properties for serial
-attached Marvell Bluetooth devices. The following chips are included in
-this binding:
-
-* Marvell 88W8897 Bluetooth devices
-
-Required properties:
- - compatible: should be:
-    "mrvl,88w8897"
-
-Optional properties:
-None so far
-
-Example:
-
-&serial0 {
-	compatible = "ns16550a";
-	...
-	bluetooth {
-		compatible = "mrvl,88w8897";
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml b/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml
new file mode 100644
index 000000000000..309ef21a1e37
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/marvell-bluetooth.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Marvell Bluetooth chips
+
+description: |
+  This documents the binding structure and common properties for serial
+  attached Marvell Bluetooth devices.
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    const: mrvl,88w8897
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+      bluetooth {
+        compatible = "mrvl,88w8897";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
deleted file mode 100644
index 3f3cfc1d8d4d..000000000000
--- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Marvell MDIO Ethernet Controller interface
-
-The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x,
-MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an
-identical unit that provides an interface with the MDIO bus.
-Additionally, Armada 7k and Armada 8k has a second unit which
-provides an interface with the xMDIO bus. This driver handles
-these interfaces.
-
-Required properties:
-- compatible: "marvell,orion-mdio" or "marvell,xmdio"
-- reg: address and length of the MDIO registers.  When an interrupt is
-  not present, the length is the size of the SMI register (4 bytes)
-  otherwise it must be 0x84 bytes to cover the interrupt control
-  registers.
-
-Optional properties:
-- interrupts: interrupt line number for the SMI error/done interrupt
-- clocks: phandle for up to four required clocks for the MDIO instance
-
-The child nodes of the MDIO driver are the individual PHY devices
-connected to this MDIO bus. They must have a "reg" property given the
-PHY address on the MDIO bus.
-
-Example at the SoC level without an interrupt property:
-
-mdio {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "marvell,orion-mdio";
-	reg = <0xd0072004 0x4>;
-};
-
-Example with an interrupt property:
-
-mdio {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "marvell,orion-mdio";
-	reg = <0xd0072004 0x84>;
-	interrupts = <30>;
-};
-
-And at the board level:
-
-mdio {
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-}
diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
index b78397669320..ce15c173f43f 100644
--- a/Documentation/devicetree/bindings/net/marvell-pp2.txt
+++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt
@@ -1,5 +1,6 @@
 * Marvell Armada 375 Ethernet Controller (PPv2.1)
   Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
+  Marvell CN913X Ethernet Controller (PPv2.3)
 
 Required properties:
 
@@ -12,10 +13,11 @@ Required properties:
 	- common controller registers
 	- LMS registers
 	- one register area per Ethernet port
-  For "marvell,armada-7k-pp2", must contain the following register
+  For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register
   sets:
 	- packet processor registers
 	- networking interfaces registers
+	- CM3 address space used for TX Flow Control
 
 - clocks: pointers to the reference clocks for this device, consequently:
 	- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
@@ -81,7 +83,7 @@ Example for marvell,armada-7k-pp2:
 
 cpm_ethernet: ethernet@0 {
 	compatible = "marvell,armada-7k-pp22";
-	reg = <0x0 0x100000>, <0x129000 0xb000>;
+	reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
 	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
 		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
 	clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
diff --git a/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml b/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml
new file mode 100644
index 000000000000..afd11c9422fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mctp-i2c-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MCTP I2C transport binding
+
+maintainers:
+  - Matt Johnston <matt@codeconstruct.com.au>
+
+description: |
+  An mctp-i2c-controller defines a local MCTP endpoint on an I2C controller.
+  MCTP I2C is specified by DMTF DSP0237.
+
+  An mctp-i2c-controller must be attached to an I2C adapter which supports
+  slave functionality. I2C busses (either directly or as subordinate mux
+  busses) are attached to the mctp-i2c-controller with a 'mctp-controller'
+  property on each used bus. Each mctp-controller I2C bus will be presented
+  to the host system as a separate MCTP I2C instance.
+
+properties:
+  compatible:
+    const: mctp-i2c-controller
+
+  reg:
+    minimum: 0x40000000
+    maximum: 0x4000007f
+    description: |
+      7 bit I2C address of the local endpoint.
+      I2C_OWN_SLAVE_ADDRESS (1<<30) flag must be set.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    // Basic case of a single I2C bus
+    #include <dt-bindings/i2c/i2c.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mctp-controller;
+
+      mctp@30 {
+        compatible = "mctp-i2c-controller";
+        reg = <(0x30 | I2C_OWN_SLAVE_ADDRESS)>;
+      };
+    };
+
+  - |
+    // Mux topology with multiple MCTP-handling busses under
+    // a single mctp-i2c-controller.
+    // i2c1 and i2c6 can have MCTP devices, i2c5 does not.
+    #include <dt-bindings/i2c/i2c.h>
+
+    i2c1: i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mctp-controller;
+
+      mctp@50 {
+        compatible = "mctp-i2c-controller";
+        reg = <(0x50 | I2C_OWN_SLAVE_ADDRESS)>;
+      };
+    };
+
+    i2c-mux {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      i2c-parent = <&i2c1>;
+
+      i2c5: i2c@0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0>;
+        eeprom@33 {
+          reg = <0x33>;
+        };
+      };
+
+      i2c6: i2c@1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <1>;
+        mctp-controller;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt
deleted file mode 100644
index 8dbcf8295c6c..000000000000
--- a/Documentation/devicetree/bindings/net/mdio-gpio.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-MDIO on GPIOs
-
-Currently defined compatibles:
-- virtual,gpio-mdio
-
-MDC and MDIO lines connected to GPIO controllers are listed in the
-gpios property as described in section VIII.1 in the following order:
-
-MDC, MDIO.
-
-Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
-node.
-
-Example:
-
-aliases {
-	mdio-gpio0 = &mdio0;
-};
-
-mdio0: mdio {
-	compatible = "virtual,mdio-gpio";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	gpios = <&qe_pio_a 11
-		 &qe_pio_c 6>;
-};
diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
new file mode 100644
index 000000000000..1d83b8dcce2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO on GPIOs
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Heiner Kallweit <hkallweit1@gmail.com>
+  - Russell King <linux@armlinux.org.uk>
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - virtual,mdio-gpio
+      - microchip,mdio-smi0
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  gpios:
+    minItems: 2
+    items:
+      - description: MDC
+      - description: MDIO
+      - description: MDO
+
+#Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+#node.
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    aliases {
+        mdio-gpio0 = &mdio0;
+    };
+
+    mdio0: mdio {
+      compatible = "virtual,mdio-gpio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      gpios = <&qe_pio_a 11>,
+              <&qe_pio_c 6>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
deleted file mode 100644
index 694987d3c17a..000000000000
--- a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-Properties for an MDIO bus multiplexer/switch controlled by GPIO pins.
-
-This is a special case of a MDIO bus multiplexer.  One or more GPIO
-lines are used to control which child bus is connected.
-
-Required properties in addition to the generic multiplexer properties:
-
-- compatible : mdio-mux-gpio.
-- gpios : GPIO specifiers for each GPIO line.  One or more must be specified.
-
-
-Example :
-
-	/* The parent MDIO bus. */
-	smi1: mdio@1180000001900 {
-		compatible = "cavium,octeon-3860-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x11800 0x00001900 0x0 0x40>;
-	};
-
-	/*
-	   An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a
-	   pair of GPIO lines.  Child busses 2 and 3 populated with 4
-	   PHYs each.
-	 */
-	mdio-mux {
-		compatible = "mdio-mux-gpio";
-		gpios = <&gpio1 3 0>, <&gpio1 4 0>;
-		mdio-parent-bus = <&smi1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mdio@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy11: ethernet-phy@1 {
-				reg = <1>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy12: ethernet-phy@2 {
-				reg = <2>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy13: ethernet-phy@3 {
-				reg = <3>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy14: ethernet-phy@4 {
-				reg = <4>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-		};
-
-		mdio@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy21: ethernet-phy@1 {
-				reg = <1>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy22: ethernet-phy@2 {
-				reg = <2>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy23: ethernet-phy@3 {
-				reg = <3>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy24: ethernet-phy@4 {
-				reg = <4>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml
new file mode 100644
index 000000000000..71c25c4580ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-mux-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Properties for an MDIO bus multiplexer/switch controlled by GPIO pins.
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description:
+  This is a special case of a MDIO bus multiplexer.  One or more GPIO
+  lines are used to control which child bus is connected.
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: mdio-mux-gpio
+
+  gpios:
+    description:
+      List of GPIOs used to control the multiplexer, least significant bit first.
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /*
+     An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a
+     pair of GPIO lines.  Child busses 2 and 3 populated with 4
+     PHYs each.
+     */
+    mdio-mux {
+        compatible = "mdio-mux-gpio";
+        gpios = <&gpio1 3 0>, <&gpio1 4 0>;
+        mdio-parent-bus = <&smi1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@2 {
+            reg = <2>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@1 {
+                reg = <1>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <10 8>; /* Pin 10, active low */
+            };
+            ethernet-phy@2 {
+                reg = <2>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <10 8>; /* Pin 10, active low */
+            };
+            ethernet-phy@3 {
+                reg = <3>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <10 8>; /* Pin 10, active low */
+            };
+            ethernet-phy@4 {
+                reg = <4>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <10 8>; /* Pin 10, active low */
+            };
+        };
+
+        mdio@3 {
+            reg = <3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@1 {
+                reg = <1>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <12 8>; /* Pin 12, active low */
+            };
+            ethernet-phy@2 {
+                reg = <2>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <12 8>; /* Pin 12, active low */
+            };
+            ethernet-phy@3 {
+                reg = <3>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <12 8>; /* Pin 12, active low */
+            };
+            ethernet-phy@4 {
+                reg = <4>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <12 8>; /* Pin 12, active low */
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt
deleted file mode 100644
index 065e8bdb957d..000000000000
--- a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Properties for an MDIO bus multiplexer controlled by a memory-mapped device
-
-This is a special case of a MDIO bus multiplexer.  A memory-mapped device,
-like an FPGA, is used to control which child bus is connected.  The mdio-mux
-node must be a child of the memory-mapped device.  The driver currently only
-supports devices with 8, 16 or 32-bit registers.
-
-Required properties in addition to the generic multiplexer properties:
-
-- compatible : string, must contain "mdio-mux-mmioreg"
-
-- reg : integer, contains the offset of the register that controls the bus
-	multiplexer.  The size field in the 'reg' property is the size of
-	register, and must therefore be 1, 2, or 4.
-
-- mux-mask : integer, contains an eight-bit mask that specifies which
-	bits in the register control the actual bus multiplexer.  The
-	'reg' property of each child mdio-mux node must be constrained by
-	this mask.
-
-Example:
-
-The FPGA node defines a memory-mapped FPGA with a register space of 0x30 bytes.
-For the "EMI2" MDIO bus, register 9 (BRDCFG1) controls the mux on that bus.
-A bitmask of 0x6 means that bits 1 and 2 (bit 0 is lsb) are the bits on
-BRDCFG1 that control the actual mux.
-
-	/* The FPGA node */
-	fpga: board-control@3,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
-		reg = <3 0 0x30>;
-		ranges = <0 3 0 0x30>;
-
-		mdio-mux-emi2 {
-			compatible = "mdio-mux-mmioreg", "mdio-mux";
-			mdio-parent-bus = <&xmdio0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <9 1>; // BRDCFG1
-			mux-mask = <0x6>; // EMI2
-
-			emi2_slot1: mdio@0 {	// Slot 1 XAUI (FM2)
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy_xgmii_slot1: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c45";
-					reg = <4>;
-				};
-			};
-
-			emi2_slot2: mdio@2 {	// Slot 2 XAUI (FM1)
-				reg = <2>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy_xgmii_slot2: ethernet-phy@4 {
-					compatible = "ethernet-phy-ieee802.3-c45";
-					reg = <0>;
-				};
-			};
-		};
-	};
-
-	/* The parent MDIO bus. */
-	xmdio0: mdio@f1000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,fman-xmdio";
-		reg = <0xf1000 0x1000>;
-		interrupts = <100 1 0 0>;
-	};
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml
new file mode 100644
index 000000000000..cf86bb0b0b62
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-mux-mmioreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Properties for an MDIO bus multiplexer controlled by a memory-mapped device
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description: |+
+  This is a special case of a MDIO bus multiplexer.  A memory-mapped device,
+  like an FPGA, is used to control which child bus is connected.  The mdio-mux
+  node must be a child of the memory-mapped device.  The driver currently only
+  supports devices with 8, 16 or 32-bit registers.
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: mdio-mux-mmioreg
+      - const: mdio-mux
+
+  reg:
+    description: Contains the offset of the register that controls the bus
+      multiplexer. The size field in the 'reg' property is the size of register,
+      and must therefore be 1, 2, or 4.
+    maxItems: 1
+
+  mux-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Contains an eight-bit mask that specifies which bits in the
+      register control the actual bus multiplexer.  The 'reg' property of each
+      child mdio-mux node must be constrained by this mask.
+
+required:
+  - compatible
+  - reg
+  - mux-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio-mux@9 {
+        compatible = "mdio-mux-mmioreg", "mdio-mux";
+        mdio-parent-bus = <&xmdio0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <9 1>; // BRDCFG1
+        mux-mask = <0x6>; // EMI2
+
+        mdio@0 {  // Slot 1 XAUI (FM2)
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy_xgmii_slot1: ethernet-phy@4 {
+                compatible = "ethernet-phy-ieee802.3-c45";
+                reg = <4>;
+            };
+        };
+
+        mdio@2 {  // Slot 2 XAUI (FM1)
+            reg = <2>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@4 {
+                compatible = "ethernet-phy-ieee802.3-c45";
+                reg = <4>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt
deleted file mode 100644
index 534e38058fe0..000000000000
--- a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Properties for an MDIO bus multiplexer consumer device
-
-This is a special case of MDIO mux  when MDIO mux is defined as a consumer
-of a mux producer device. The mux producer can be of any type like mmio mux
-producer, gpio mux producer or generic register based mux producer.
-
-Required properties in addition to the MDIO Bus multiplexer properties:
-
-- compatible : should be "mmio-mux-multiplexer"
-- mux-controls : mux controller node to use for operating the mux
-- mdio-parent-bus : phandle to the parent MDIO bus.
-
-each child node of mdio bus multiplexer consumer device represent a mdio
-bus.
-
-for more information please refer
-Documentation/devicetree/bindings/mux/mux-controller.txt
-and Documentation/devicetree/bindings/net/mdio-mux.txt
-
-Example:
-In below example the Mux producer and consumer are separate nodes.
-
-&i2c0 {
-	fpga@66 { // fpga connected to i2c
-		compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
-			     "simple-mfd";
-		reg = <0x66>;
-
-		mux: mux-controller { // Mux Producer
-			compatible = "reg-mux";
-			#mux-control-cells = <1>;
-			mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
-					<0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
-		};
-	};
-};
-
-mdio-mux-1 { // Mux consumer
-	compatible = "mdio-mux-multiplexer";
-	mux-controls = <&mux 0>;
-	mdio-parent-bus = <&emdio1>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	mdio@0 {
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	mdio@8 {
-		reg = <0x8>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	..
-	..
-};
-
-mdio-mux-2 { // Mux consumer
-	compatible = "mdio-mux-multiplexer";
-	mux-controls = <&mux 1>;
-	mdio-parent-bus = <&emdio2>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	mdio@0 {
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	mdio@1 {
-		reg = <0x1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	..
-	..
-};
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml
new file mode 100644
index 000000000000..282987074ee4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-mux-multiplexer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Properties for an MDIO bus multiplexer consumer device
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description: |+
+  This is a special case of MDIO mux when MDIO mux is defined as a consumer
+  of a mux producer device. The mux producer can be of any type like mmio mux
+  producer, gpio mux producer or generic register based mux producer.
+
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: mdio-mux-multiplexer
+
+  mux-controls:
+    maxItems: 1
+
+required:
+  - compatible
+  - mux-controls
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mux: mux-controller { // Mux Producer
+        compatible = "reg-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+                        <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
+    };
+
+    mdio-mux-1 { // Mux consumer
+        compatible = "mdio-mux-multiplexer";
+        mux-controls = <&mux 0>;
+        mdio-parent-bus = <&emdio1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        mdio@8 {
+            reg = <0x8>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+
+    mdio-mux-2 { // Mux consumer
+        compatible = "mdio-mux-multiplexer";
+        mux-controls = <&mux 1>;
+        mdio-parent-bus = <&emdio2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        mdio@1 {
+            reg = <0x1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/mdio-mux.txt b/Documentation/devicetree/bindings/net/mdio-mux.txt
deleted file mode 100644
index f58571f36570..000000000000
--- a/Documentation/devicetree/bindings/net/mdio-mux.txt
+++ /dev/null
@@ -1,129 +0,0 @@
-Common MDIO bus multiplexer/switch properties.
-
-An MDIO bus multiplexer/switch will have several child busses that are
-numbered uniquely in a device dependent manner.  The nodes for an MDIO
-bus multiplexer/switch will have one child node for each child bus.
-
-Required properties:
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- mdio-parent-bus : phandle to the parent MDIO bus.
-
-- Other properties specific to the multiplexer/switch hardware.
-
-Required properties for child nodes:
-- #address-cells = <1>;
-- #size-cells = <0>;
-- reg : The sub-bus number.
-
-
-Example :
-
-	/* The parent MDIO bus. */
-	smi1: mdio@1180000001900 {
-		compatible = "cavium,octeon-3860-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x11800 0x00001900 0x0 0x40>;
-	};
-
-	/*
-	   An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a
-	   pair of GPIO lines.  Child busses 2 and 3 populated with 4
-	   PHYs each.
-	 */
-	mdio-mux {
-		compatible = "mdio-mux-gpio";
-		gpios = <&gpio1 3 0>, <&gpio1 4 0>;
-		mdio-parent-bus = <&smi1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mdio@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy11: ethernet-phy@1 {
-				reg = <1>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy12: ethernet-phy@2 {
-				reg = <2>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy13: ethernet-phy@3 {
-				reg = <3>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy14: ethernet-phy@4 {
-				reg = <4>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-		};
-
-		mdio@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy21: ethernet-phy@1 {
-				reg = <1>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy22: ethernet-phy@2 {
-				reg = <2>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy23: ethernet-phy@3 {
-				reg = <3>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy24: ethernet-phy@4 {
-				reg = <4>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/mdio-mux.yaml b/Documentation/devicetree/bindings/net/mdio-mux.yaml
new file mode 100644
index 000000000000..4321c87de86f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common MDIO bus multiplexer/switch properties.
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description: |+
+  An MDIO bus multiplexer/switch will have several child busses that are
+  numbered uniquely in a device dependent manner.  The nodes for an MDIO
+  bus multiplexer/switch will have one child node for each child bus.
+
+properties:
+  mdio-parent-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the MDIO bus that this multiplexer's master-side port is
+      connected to.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^mdio@[0-9a-f]+$':
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
index 50c3397a82bc..b5706d4e7e38 100644
--- a/Documentation/devicetree/bindings/net/mdio.yaml
+++ b/Documentation/devicetree/bindings/net/mdio.yaml
@@ -31,16 +31,35 @@ properties:
     maxItems: 1
     description:
       The phandle and specifier for the GPIO that controls the RESET
-      lines of all PHYs on that MDIO bus.
+      lines of all devices on that MDIO bus.
 
   reset-delay-us:
     description:
-      RESET pulse width in microseconds. It applies to all PHY devices
-      and must therefore be appropriately determined based on all PHY
-      requirements (maximum value of all per-PHY RESET pulse widths).
+      RESET pulse width in microseconds. It applies to all MDIO devices
+      and must therefore be appropriately determined based on all devices
+      requirements (maximum value of all per-device RESET pulse widths).
+
+  reset-post-delay-us:
+    description:
+      Delay after reset deassert in microseconds. It applies to all MDIO
+      devices and it's determined by how fast all devices are ready for
+      communication. This delay happens just before e.g. Ethernet PHY
+      type ID auto detection.
+
+  clock-frequency:
+    description:
+      Desired MDIO bus clock frequency in Hz. Values greater than IEEE 802.3
+      defined 2.5MHz should only be used when all devices on the bus support
+      the given clock speed.
+
+  suppress-preamble:
+    description:
+      The 32 bit preamble should be suppressed. In order for this to
+      work, all devices on the bus must support suppressed preamble.
+    type: boolean
 
 patternProperties:
-  "^ethernet-phy@[0-9a-f]+$":
+  '@[0-9a-f]+$':
     type: object
 
     properties:
@@ -48,11 +67,35 @@ patternProperties:
         minimum: 0
         maximum: 31
         description:
-          The ID number for the PHY.
+          The ID number for the device.
+
+      broken-turn-around:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          If set, indicates the MDIO device does not correctly release
+          the turn around line low at end of the control phase of the
+          MDIO transaction.
+
+      reset-gpios:
+        maxItems: 1
+        description:
+          The GPIO phandle and specifier for the MDIO reset signal.
+
+      reset-assert-us:
+        description:
+          Delay after the reset was asserted in microseconds. If this
+          property is missing the delay will be skipped.
+
+      reset-deassert-us:
+        description:
+          Delay after the reset was deasserted in microseconds. If
+          this property is missing the delay will be skipped.
 
     required:
       - reg
 
+additionalProperties: true
+
 examples:
   - |
     davinci_mdio: mdio@5c030000 {
diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
deleted file mode 100644
index 358fed2fab43..000000000000
--- a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Mediatek Gigabit Switch
-=======================
-
-The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621).
-
-Required properties:
-- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the gigabit switches interrupt
-- resets: Should contain the gigabit switches resets
-- reset-names: Should contain the reset names "gsw"
-
-Example:
-
-gsw@10110000 {
-	compatible = "ralink,mt7620-gsw";
-	reg = <0x10110000 8000>;
-
-	resets = <&rstctrl 23>;
-	reset-names = "gsw";
-
-	interrupt-parent = <&intc>;
-	interrupts = <17>;
-};
diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml
new file mode 100644
index 000000000000..7ef696204c5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -0,0 +1,446 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek,net.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Frame Engine Ethernet controller
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs
+  have dual GMAC ports.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-eth
+      - mediatek,mt7623-eth
+      - mediatek,mt7622-eth
+      - mediatek,mt7629-eth
+      - mediatek,mt7986-eth
+      - ralink,rt5350-eth
+
+  reg:
+    maxItems: 1
+
+  clocks: true
+  clock-names: true
+
+  interrupts:
+    minItems: 3
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: fe
+      - const: gmac
+      - const: ppe
+
+  mediatek,ethsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon node that handles the port setup.
+
+  cci-control-port: true
+
+  mediatek,hifsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the mediatek hifsys controller used to provide various clocks
+      and reset to the system.
+
+  mediatek,sgmiisys:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
+    items:
+      maxItems: 1
+    description:
+      A list of phandle to the syscon node that handles the SGMII setup which is required for
+      those SoCs equipped with SGMII.
+
+  mediatek,wed:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 2
+    maxItems: 2
+    items:
+      maxItems: 1
+    description:
+      List of phandles to wireless ethernet dispatch nodes.
+
+  dma-coherent: true
+
+  mdio-bus:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-eth
+              - mediatek,mt7623-eth
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+
+        clocks:
+          minItems: 4
+          maxItems: 4
+
+        clock-names:
+          items:
+            - const: ethif
+            - const: esw
+            - const: gp1
+            - const: gp2
+
+        mediatek,pctl:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description:
+            Phandle to the syscon node that handles the ports slew rate and
+            driver current.
+
+        mediatek,wed: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7622-eth
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+
+        clocks:
+          minItems: 11
+          maxItems: 11
+
+        clock-names:
+          items:
+            - const: ethif
+            - const: esw
+            - const: gp0
+            - const: gp1
+            - const: gp2
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii_ck
+            - const: eth2pll
+
+        mediatek,sgmiisys:
+          minItems: 1
+          maxItems: 1
+
+        mediatek,pcie-mirror:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description:
+            Phandle to the mediatek pcie-mirror controller.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7629-eth
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+
+        clocks:
+          minItems: 17
+          maxItems: 17
+
+        clock-names:
+          items:
+            - const: ethif
+            - const: sgmiitop
+            - const: esw
+            - const: gp0
+            - const: gp1
+            - const: gp2
+            - const: fe
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii2_tx250m
+            - const: sgmii2_rx250m
+            - const: sgmii2_cdr_ref
+            - const: sgmii2_cdr_fb
+            - const: sgmii_ck
+            - const: eth2pll
+
+        mediatek,infracfg:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description:
+            Phandle to the syscon node that handles the path from GMAC to
+            PHY variants.
+
+        mediatek,sgmiisys:
+          minItems: 2
+          maxItems: 2
+
+        mediatek,wed: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7986-eth
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+
+        clocks:
+          minItems: 15
+          maxItems: 15
+
+        clock-names:
+          items:
+            - const: fe
+            - const: gp2
+            - const: gp1
+            - const: wocpu1
+            - const: wocpu0
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii2_tx250m
+            - const: sgmii2_rx250m
+            - const: sgmii2_cdr_ref
+            - const: sgmii2_cdr_fb
+            - const: netsys0
+            - const: netsys1
+
+        mediatek,sgmiisys:
+          minItems: 2
+          maxItems: 2
+
+        mediatek,wed-pcie:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description:
+            Phandle to the mediatek wed-pcie controller.
+
+patternProperties:
+  "^mac@[0-1]$":
+    type: object
+    additionalProperties: false
+    allOf:
+      - $ref: ethernet-controller.yaml#
+    description:
+      Ethernet MAC node
+    properties:
+      compatible:
+        const: mediatek,eth-mac
+
+      reg:
+        maxItems: 1
+
+      phy-handle: true
+
+      phy-mode: true
+
+    required:
+      - reg
+      - compatible
+      - phy-handle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - mediatek,ethsys
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt7622-clk.h>
+    #include <dt-bindings/power/mt7622-power.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      ethernet: ethernet@1b100000 {
+        compatible = "mediatek,mt7622-eth";
+        reg = <0 0x1b100000 0 0x20000>;
+        interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+                     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+                     <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_ETH_SEL>,
+                 <&ethsys CLK_ETH_ESW_EN>,
+                 <&ethsys CLK_ETH_GP0_EN>,
+                 <&ethsys CLK_ETH_GP1_EN>,
+                 <&ethsys CLK_ETH_GP2_EN>,
+                 <&sgmiisys CLK_SGMII_TX250M_EN>,
+                 <&sgmiisys CLK_SGMII_RX250M_EN>,
+                 <&sgmiisys CLK_SGMII_CDR_REF>,
+                 <&sgmiisys CLK_SGMII_CDR_FB>,
+                 <&topckgen CLK_TOP_SGMIIPLL>,
+                 <&apmixedsys CLK_APMIXED_ETH2PLL>;
+        clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
+                      "sgmii_tx250m", "sgmii_rx250m",
+                      "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
+                      "eth2pll";
+        power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+        mediatek,ethsys = <&ethsys>;
+        mediatek,sgmiisys = <&sgmiisys>;
+        cci-control-port = <&cci_control2>;
+        mediatek,pcie-mirror = <&pcie_mirror>;
+        mediatek,hifsys = <&hifsys>;
+        dma-coherent;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio0: mdio-bus {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          phy0: ethernet-phy@0 {
+            reg = <0>;
+          };
+
+          phy1: ethernet-phy@1 {
+            reg = <1>;
+          };
+        };
+
+        gmac0: mac@0 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "rgmii";
+          phy-handle = <&phy0>;
+          reg = <0>;
+        };
+
+        gmac1: mac@1 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "rgmii";
+          phy-handle = <&phy1>;
+          reg = <1>;
+        };
+      };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt7622-clk.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      eth: ethernet@15100000 {
+        #define CLK_ETH_FE_EN               0
+        #define CLK_ETH_WOCPU1_EN           3
+        #define CLK_ETH_WOCPU0_EN           4
+        #define CLK_TOP_NETSYS_SEL          43
+        #define CLK_TOP_NETSYS_500M_SEL     44
+        #define CLK_TOP_NETSYS_2X_SEL       46
+        #define CLK_TOP_SGM_325M_SEL        47
+        #define CLK_APMIXED_NET2PLL         1
+        #define CLK_APMIXED_SGMPLL          3
+
+        compatible = "mediatek,mt7986-eth";
+        reg = <0 0x15100000 0 0x80000>;
+        interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ethsys CLK_ETH_FE_EN>,
+                 <&ethsys CLK_ETH_GP2_EN>,
+                 <&ethsys CLK_ETH_GP1_EN>,
+                 <&ethsys CLK_ETH_WOCPU1_EN>,
+                 <&ethsys CLK_ETH_WOCPU0_EN>,
+                 <&sgmiisys0 CLK_SGMII_TX250M_EN>,
+                 <&sgmiisys0 CLK_SGMII_RX250M_EN>,
+                 <&sgmiisys0 CLK_SGMII_CDR_REF>,
+                 <&sgmiisys0 CLK_SGMII_CDR_FB>,
+                 <&sgmiisys1 CLK_SGMII_TX250M_EN>,
+                 <&sgmiisys1 CLK_SGMII_RX250M_EN>,
+                 <&sgmiisys1 CLK_SGMII_CDR_REF>,
+                 <&sgmiisys1 CLK_SGMII_CDR_FB>,
+                 <&topckgen CLK_TOP_NETSYS_SEL>,
+                 <&topckgen CLK_TOP_NETSYS_SEL>;
+        clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0",
+                      "sgmii_tx250m", "sgmii_rx250m",
+                      "sgmii_cdr_ref", "sgmii_cdr_fb",
+                      "sgmii2_tx250m", "sgmii2_rx250m",
+                      "sgmii2_cdr_ref", "sgmii2_cdr_fb",
+                      "netsys0", "netsys1";
+        mediatek,ethsys = <&ethsys>;
+        mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
+        assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+                          <&topckgen CLK_TOP_SGM_325M_SEL>;
+        assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+                                 <&apmixedsys CLK_APMIXED_SGMPLL>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio: mdio-bus {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          phy5: ethernet-phy@0 {
+            compatible = "ethernet-phy-id67c9.de0a";
+            phy-mode = "2500base-x";
+            reset-gpios = <&pio 6 1>;
+            reset-deassert-us = <20000>;
+            reg = <5>;
+          };
+
+          phy6: ethernet-phy@1 {
+            compatible = "ethernet-phy-id67c9.de0a";
+            phy-mode = "2500base-x";
+            reg = <6>;
+          };
+        };
+
+        mac0: mac@0 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "2500base-x";
+          phy-handle = <&phy5>;
+          reg = <0>;
+        };
+
+        mac1: mac@1 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "2500base-x";
+          phy-handle = <&phy6>;
+          reg = <1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
new file mode 100644
index 000000000000..64c893c98d80
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek,star-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek STAR Ethernet MAC Controller
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description:
+  This Ethernet MAC is used on the MT8* family of SoCs from MediaTek.
+  It's compliant with 802.3 standards and supports half- and full-duplex
+  modes with flow-control as well as CRC offloading and VLAN tags.
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8516-eth
+      - mediatek,mt8518-eth
+      - mediatek,mt8175-eth
+      - mediatek,mt8365-eth
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    additionalItems: false
+    items:
+      - const: core
+      - const: reg
+      - const: trans
+
+  mediatek,pericfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the device containing the PERICFG register range. This is used
+      to control the MII mode.
+
+  mediatek,rmii-rxc:
+    type: boolean
+    description:
+      If present, indicates that the RMII reference clock, which is from external
+      PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
+
+  mediatek,rxc-inverse:
+    type: boolean
+    description:
+      If present, indicates that clock on RXC pad will be inversed.
+
+  mediatek,txc-inverse:
+    type: boolean
+    description:
+      If present, indicates that clock on TXC pad will be inversed.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - mediatek,pericfg
+  - phy-handle
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8516-clk.h>
+
+    ethernet: ethernet@11180000 {
+        compatible = "mediatek,mt8516-eth";
+        reg = <0x11180000 0x1000>;
+        mediatek,pericfg = <&pericfg>;
+        interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_RG_ETH>,
+                 <&topckgen CLK_TOP_66M_ETH>,
+                 <&topckgen CLK_TOP_133M_ETH>;
+        clock-names = "core", "reg", "trans";
+        phy-handle = <&eth_phy>;
+        phy-mode = "rmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eth_phy: ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
index 112011c51d5e..9ef5bacda8c1 100644
--- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
@@ -3,7 +3,7 @@ MediaTek SoC built-in Bluetooth Devices
 
 This device is a serial attached device to BTIF device and thus it must be a
 child node of the serial node with BTIF. The dt-bindings details for BTIF
-device can be known via Documentation/devicetree/bindings/serial/8250.txt.
+device can be known via Documentation/devicetree/bindings/serial/8250.yaml.
 
 Required properties:
 
@@ -42,7 +42,7 @@ child node of the serial node with UART.
 
 Please refer to the following documents for generic properties:
 
-	Documentation/devicetree/bindings/serial/slave-device.txt
+	Documentation/devicetree/bindings/serial/serial.yaml
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
deleted file mode 100644
index afbcaebf062e..000000000000
--- a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-MediaTek DWMAC glue layer controller
-
-This file documents platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
-- compatible:  Should be "mediatek,mt2712-gmac" for MT2712 SoC
-- reg:  Address and length of the register set for the device
-- interrupts:  Should contain the MAC interrupts
-- interrupt-names: Should contain a list of interrupt names corresponding to
-	the interrupts in the interrupts property, if available.
-	Should be "macirq" for the main MAC IRQ
-- clocks: Must contain a phandle for each entry in clock-names.
-- clock-names: The name of the clock listed in the clocks property. These are
-	"axi", "apb", "mac_main", "ptp_ref", "rmii_internal" for MT2712 SoC.
-- mac-address: See ethernet.txt in the same directory
-- phy-mode: See ethernet.txt in the same directory
-- mediatek,pericfg: A phandle to the syscon node that control ethernet
-	interface and timing delay.
-
-Optional properties:
-- mediatek,tx-delay-ps: TX clock delay macro value. Default is 0.
-	It should be defined for RGMII/MII interface.
-	It should be defined for RMII interface when the reference clock is from MT2712 SoC.
-- mediatek,rx-delay-ps: RX clock delay macro value. Default is 0.
-	It should be defined for RGMII/MII interface.
-	It should be defined for RMII interface.
-Both delay properties need to be a multiple of 170 for RGMII interface,
-or will round down. Range 0~31*170.
-Both delay properties need to be a multiple of 550 for MII/RMII interface,
-or will round down. Range 0~31*550.
-
-- mediatek,rmii-rxc: boolean property, if present indicates that the RMII
-	reference clock, which is from external PHYs, is connected to RXC pin
-	on MT2712 SoC.
-	Otherwise, is connected to TXC pin.
-- mediatek,rmii-clk-from-mac: boolean property, if present indicates that
-	MT2712 SoC provides the RMII reference clock, which outputs to TXC pin only.
-- mediatek,txc-inverse: boolean property, if present indicates that
-	1. tx clock will be inversed in MII/RGMII case,
-	2. tx clock inside MAC will be inversed relative to reference clock
-	   which is from external PHYs in RMII case, and it rarely happen.
-	3. the reference clock, which outputs to TXC pin will be inversed in RMII case
-	   when the reference clock is from MT2712 SoC.
-- mediatek,rxc-inverse: boolean property, if present indicates that
-	1. rx clock will be inversed in MII/RGMII case.
-	2. reference clock will be inversed when arrived at MAC in RMII case, when
-	   the reference clock is from external PHYs.
-	3. the inside clock, which be sent to MAC, will be inversed in RMII case when
-	   the reference clock is from MT2712 SoC.
-- assigned-clocks: mac_main and ptp_ref clocks
-- assigned-clock-parents: parent clocks of the assigned clocks
-
-Example:
-	eth: ethernet@1101c000 {
-		compatible = "mediatek,mt2712-gmac";
-		reg = <0 0x1101c000 0 0x1300>;
-		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "macirq";
-		phy-mode ="rgmii-rxid";
-		mac-address = [00 55 7b b5 7d f7];
-		clock-names = "axi",
-			      "apb",
-			      "mac_main",
-			      "ptp_ref",
-			      "rmii_internal";
-		clocks = <&pericfg CLK_PERI_GMAC>,
-			 <&pericfg CLK_PERI_GMAC_PCLK>,
-			 <&topckgen CLK_TOP_ETHER_125M_SEL>,
-			 <&topckgen CLK_TOP_ETHER_50M_SEL>,
-			 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
-		assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
-				  <&topckgen CLK_TOP_ETHER_50M_SEL>,
-				  <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
-		assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
-					 <&topckgen CLK_TOP_APLL1_D3>,
-					 <&topckgen CLK_TOP_ETHERPLL_50M>;
-		power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
-		mediatek,pericfg = <&pericfg>;
-		mediatek,tx-delay-ps = <1530>;
-		mediatek,rx-delay-ps = <1530>;
-		mediatek,rmii-rxc;
-		mediatek,txc-inverse;
-		mediatek,rxc-inverse;
-		snps,txpbl = <1>;
-		snps,rxpbl = <1>;
-		snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
-		snps,reset-active-low;
-	};
diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
new file mode 100644
index 000000000000..0fa2132fa4f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DWMAC glue layer controller
+
+maintainers:
+  - Biao Huang <biao.huang@mediatek.com>
+
+description:
+  This file documents platform glue layer for stmmac.
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mt2712-gmac
+          - mediatek,mt8188-gmac
+          - mediatek,mt8195-gmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2712-gmac
+          - const: snps,dwmac-4.20a
+      - items:
+          - enum:
+              - mediatek,mt8195-gmac
+          - const: snps,dwmac-5.10a
+      - items:
+          - enum:
+              - mediatek,mt8188-gmac
+          - const: mediatek,mt8195-gmac
+          - const: snps,dwmac-5.10a
+
+  clocks:
+    minItems: 5
+    items:
+      - description: AXI clock
+      - description: APB clock
+      - description: MAC Main clock
+      - description: PTP clock
+      - description: RMII reference clock provided by MAC
+      - description: MAC clock gate
+
+  clock-names:
+    minItems: 5
+    items:
+      - const: axi
+      - const: apb
+      - const: mac_main
+      - const: ptp_ref
+      - const: rmii_internal
+      - const: mac_cg
+
+  power-domains:
+    maxItems: 1
+
+  mediatek,pericfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle to the syscon node that control ethernet
+      interface and timing delay.
+
+  mediatek,tx-delay-ps:
+    description:
+      The internal TX clock delay (provided by this driver) in nanoseconds.
+      For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
+      or will round down. Range 0~31*170.
+      For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
+      or will round down. Range 0~31*550.
+      For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple of 290,
+      or will round down. Range 0~31*290.
+
+  mediatek,rx-delay-ps:
+    description:
+      The internal RX clock delay (provided by this driver) in nanoseconds.
+      For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
+      or will round down. Range 0~31*170.
+      For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
+      or will round down. Range 0~31*550.
+      For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple
+      of 290, or will round down. Range 0~31*290.
+
+  mediatek,rmii-rxc:
+    type: boolean
+    description:
+      If present, indicates that the RMII reference clock, which is from external
+      PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
+
+  mediatek,rmii-clk-from-mac:
+    type: boolean
+    description:
+      If present, indicates that MAC provides the RMII reference clock, which
+      outputs to TXC pin only.
+
+  mediatek,txc-inverse:
+    type: boolean
+    description:
+      If present, indicates that
+      1. tx clock will be inversed in MII/RGMII case,
+      2. tx clock inside MAC will be inversed relative to reference clock
+         which is from external PHYs in RMII case, and it rarely happen.
+      3. the reference clock, which outputs to TXC pin will be inversed in RMII case
+         when the reference clock is from MAC.
+
+  mediatek,rxc-inverse:
+    type: boolean
+    description:
+      If present, indicates that
+      1. rx clock will be inversed in MII/RGMII case.
+      2. reference clock will be inversed when arrived at MAC in RMII case, when
+         the reference clock is from external PHYs.
+      3. the inside clock, which be sent to MAC, will be inversed in RMII case when
+         the reference clock is from MAC.
+
+  mediatek,mac-wol:
+    type: boolean
+    description:
+      If present, indicates that MAC supports WOL(Wake-On-LAN), and MAC WOL will be enabled.
+      Otherwise, PHY WOL is perferred.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - phy-mode
+  - mediatek,pericfg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2712-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt2712-power.h>
+
+    eth: ethernet@1101c000 {
+        compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a";
+        reg = <0x1101c000 0x1300>;
+        interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "macirq";
+        phy-mode ="rgmii-rxid";
+        mac-address = [00 55 7b b5 7d f7];
+        clock-names = "axi",
+                      "apb",
+                      "mac_main",
+                      "ptp_ref",
+                      "rmii_internal";
+        clocks = <&pericfg CLK_PERI_GMAC>,
+                 <&pericfg CLK_PERI_GMAC_PCLK>,
+                 <&topckgen CLK_TOP_ETHER_125M_SEL>,
+                 <&topckgen CLK_TOP_ETHER_50M_SEL>,
+                 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+        assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
+                          <&topckgen CLK_TOP_ETHER_50M_SEL>,
+                          <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
+                                 <&topckgen CLK_TOP_APLL1_D3>,
+                                 <&topckgen CLK_TOP_ETHERPLL_50M>;
+        power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
+        mediatek,pericfg = <&pericfg>;
+        mediatek,tx-delay-ps = <1530>;
+        snps,txpbl = <1>;
+        snps,rxpbl = <1>;
+        snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
+        snps,reset-delays-us = <0 10000 10000>;
+    };
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
deleted file mode 100644
index 72d03e07cf7c..000000000000
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-MediaTek Frame Engine Ethernet controller
-=========================================
-
-The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs
-have dual GMAC each represented by a child node..
-
-* Ethernet controller node
-
-Required properties:
-- compatible: Should be
-		"mediatek,mt2701-eth": for MT2701 SoC
-		"mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC
-		"mediatek,mt7622-eth": for MT7622 SoC
-		"mediatek,mt7629-eth": for MT7629 SoC
-		"ralink,rt5350-eth": for Ralink Rt5350F and MT7628/88 SoC
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the three frame engines interrupts in numeric
-	order. These are fe_int0, fe_int1 and fe_int2.
-- clocks: the clock used by the core
-- clock-names: the names of the clock listed in the clocks property. These are
-	"ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC
-        "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m",
-	"sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC
-	"ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "sgmii_tx250m",
-	"sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii2_tx250m",
-	"sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb", "sgmii_ck",
-	"eth2pll" : For MT7629 SoC.
-- power-domains: phandle to the power domain that the ethernet is part of
-- resets: Should contain phandles to the ethsys reset signals
-- reset-names: Should contain the names of reset signal listed in the resets
-		property
-		These are "fe", "gmac" and "ppe"
-- mediatek,ethsys: phandle to the syscon node that handles the port setup
-- mediatek,infracfg: phandle to the syscon node that handles the path from
-	GMAC to PHY variants, which is required for MT7629 SoC.
-- mediatek,sgmiisys: a list of phandles to the syscon node that handles the
-	SGMII setup which is required for those SoCs equipped with SGMII such
-	as MT7622 and MT7629 SoC. And MT7622 have only one set of SGMII shared
-	by GMAC1 and GMAC2; MT7629 have two independent sets of SGMII directed
-	to GMAC1 and GMAC2, respectively.
-- mediatek,pctl: phandle to the syscon node that handles the ports slew rate
-	and driver current: only for MT2701 and MT7623 SoC
-
-* Ethernet MAC node
-
-Required properties:
-- compatible: Should be "mediatek,eth-mac"
-- reg: The number of the MAC
-- phy-handle: see ethernet.txt file in the same directory and
-	the phy-mode "trgmii" required being provided when reg
-	is equal to 0 and the MAC uses fixed-link to connect
-	with internal switch such as MT7530.
-
-Example:
-
-eth: ethernet@1b100000 {
-	compatible = "mediatek,mt7623-eth";
-	reg = <0 0x1b100000 0 0x20000>;
-	clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
-		 <&ethsys CLK_ETHSYS_ESW>,
-		 <&ethsys CLK_ETHSYS_GP2>,
-		 <&ethsys CLK_ETHSYS_GP1>;
-	clock-names = "ethif", "esw", "gp2", "gp1";
-	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW
-		      GIC_SPI 199 IRQ_TYPE_LEVEL_LOW
-		      GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-	resets = <&ethsys MT2701_ETHSYS_ETH_RST>;
-	reset-names = "eth";
-	mediatek,ethsys = <&ethsys>;
-	mediatek,pctl = <&syscfg_pctl_a>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	gmac1: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-handle = <&phy0>;
-	};
-
-	gmac2: mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-handle = <&phy1>;
-	};
-
-	mdio-bus {
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			phy-mode = "rgmii";
-		};
-
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-			phy-mode = "rgmii";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml
new file mode 100644
index 000000000000..5aa7cf2eacb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/micrel,ks8851.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Micrel KS8851 Ethernet MAC (SPI and Parallel bus options)
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - micrel,ks8851      # SPI bus option
+      - micrel,ks8851-mll  # Parallel bus option
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    items:
+      - description: SPI or Parallel bus hardware address
+      - description: Parallel bus command mode address
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      The reset_n input pin
+
+  vdd-supply:
+    description: |
+      Analog 3.3V supply for Ethernet MAC
+
+  vdd-io-supply:
+    description: |
+      Digital 1.8V IO supply for Ethernet MAC
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: micrel,ks8851
+    then:
+      properties:
+        reg:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: micrel,ks8851-mll
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* SPI bus option */
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ethernet@0 {
+            compatible = "micrel,ks8851";
+            reg = <0>;
+            interrupt-parent = <&msmgpio>;
+            interrupts = <90 8>;
+            vdd-supply = <&ext_l2>;
+            vdd-io-supply = <&pm8921_lvs6>;
+            reset-gpios = <&msmgpio 89 0>;
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    /* Parallel bus option */
+    memory-controller {
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ethernet@1,0 {
+            compatible = "micrel,ks8851-mll";
+            reg = <1 0x0 0x2>, <1 0x2 0x20000>;
+            interrupt-parent = <&gpioc>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/micrel-ks8851.txt b/Documentation/devicetree/bindings/net/micrel-ks8851.txt
deleted file mode 100644
index bbdf9a7359a2..000000000000
--- a/Documentation/devicetree/bindings/net/micrel-ks8851.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Micrel KS8851 Ethernet mac (MLL)
-
-Required properties:
-- compatible = "micrel,ks8851-mll" of parallel interface
-- reg : 2 physical address and size of registers for data and command
-- interrupts : interrupt connection
-
-Micrel KS8851 Ethernet mac (SPI)
-
-Required properties:
-- compatible = "micrel,ks8851" or the deprecated "ks8851"
-- reg : chip select number
-- interrupts : interrupt connection
-
-Optional properties:
-- vdd-supply: analog 3.3V supply for Ethernet mac
-- vdd-io-supply: digital 1.8V IO supply for Ethernet mac
-- reset-gpios: reset_n input pin
diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
index b921731cd970..df9e844dd6bc 100644
--- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
+++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
@@ -65,6 +65,71 @@ KSZ9031:
   step is 60ps. The default value is the neutral setting, so setting
   rxc-skew-ps=<0> actually results in -900 picoseconds adjustment.
 
+  The KSZ9031 hardware supports a range of skew values from negative to
+  positive, where the specific range is property dependent. All values
+  specified in the devicetree are offset by the minimum value so they
+  can be represented as positive integers in the devicetree since it's
+  difficult to represent a negative number in the devictree.
+
+  The following 5-bit values table apply to rxc-skew-ps and txc-skew-ps.
+
+  Pad Skew Value	Delay (ps)	Devicetree Value
+  ------------------------------------------------------
+  0_0000		-900ps		0
+  0_0001		-840ps		60
+  0_0010		-780ps		120
+  0_0011		-720ps		180
+  0_0100		-660ps		240
+  0_0101		-600ps		300
+  0_0110		-540ps		360
+  0_0111		-480ps		420
+  0_1000		-420ps		480
+  0_1001		-360ps		540
+  0_1010		-300ps		600
+  0_1011		-240ps		660
+  0_1100		-180ps		720
+  0_1101		-120ps		780
+  0_1110		-60ps		840
+  0_1111		0ps		900
+  1_0000		60ps		960
+  1_0001		120ps		1020
+  1_0010		180ps		1080
+  1_0011		240ps		1140
+  1_0100		300ps		1200
+  1_0101		360ps		1260
+  1_0110		420ps		1320
+  1_0111		480ps		1380
+  1_1000		540ps		1440
+  1_1001		600ps		1500
+  1_1010		660ps		1560
+  1_1011		720ps		1620
+  1_1100		780ps		1680
+  1_1101		840ps		1740
+  1_1110		900ps		1800
+  1_1111		960ps		1860
+
+  The following 4-bit values table apply to the txdX-skew-ps, rxdX-skew-ps
+  data pads, and the rxdv-skew-ps, txen-skew-ps control pads.
+
+  Pad Skew Value	Delay (ps)	Devicetree Value
+  ------------------------------------------------------
+  0000			-420ps		0
+  0001			-360ps		60
+  0010			-300ps		120
+  0011			-240ps		180
+  0100			-180ps		240
+  0101			-120ps		300
+  0110			-60ps		360
+  0111			0ps		420
+  1000			60ps		480
+  1001			120ps		540
+  1010			180ps		600
+  1011			240ps		660
+  1100			300ps		720
+  1101			360ps		780
+  1110			420ps		840
+  1111			480ps		900
+
   Optional properties:
 
     Maximum value of 1860, default value 900:
@@ -120,11 +185,21 @@ KSZ9131:
 
 Examples:
 
+	/* Attach to an Ethernet device with autodetected PHY */
+	&enet {
+		rxc-skew-ps = <1800>;
+		rxdv-skew-ps = <0>;
+		txc-skew-ps = <1800>;
+		txen-skew-ps = <0>;
+		status = "okay";
+	};
+
+	/* Attach to an explicitly-specified PHY */
 	mdio {
 		phy0: ethernet-phy@0 {
-			rxc-skew-ps = <3000>;
+			rxc-skew-ps = <1800>;
 			rxdv-skew-ps = <0>;
-			txc-skew-ps = <3000>;
+			txc-skew-ps = <1800>;
 			txen-skew-ps = <0>;
 			reg = <0>;
 		};
@@ -133,3 +208,20 @@ Examples:
 		phy = <&phy0>;
 		phy-mode = "rgmii-id";
 	};
+
+References
+
+  Micrel ksz9021rl/rn Data Sheet, Revision 1.2. Dated 2/13/2014.
+  http://www.micrel.com/_PDF/Ethernet/datasheets/ksz9021rl-rn_ds.pdf
+
+  Micrel ksz9031rnx Data Sheet, Revision 2.1. Dated 11/20/2014.
+  http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf
+
+Notes:
+
+  Note that a previous version of the Micrel ksz9021rl/rn Data Sheet
+  was missing extended register 106 (transmit data pad skews), and
+  incorrectly specified the ps per step as 200ps/step instead of
+  120ps/step. The latest update to this document reflects the latest
+  revision of the Micrel specification even though usage in the kernel
+  still reflects that incorrect document.
diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt
index 8d157f0295a5..a407dd1b4614 100644
--- a/Documentation/devicetree/bindings/net/micrel.txt
+++ b/Documentation/devicetree/bindings/net/micrel.txt
@@ -16,6 +16,7 @@ Optional properties:
 	KSZ8051: register 0x1f, bits 5..4
 	KSZ8081: register 0x1f, bits 5..4
 	KSZ8091: register 0x1f, bits 5..4
+	LAN8814: register EP5.0, bit 6
 
 	See the respective PHY datasheet for the mode values.
 
@@ -45,3 +46,12 @@ Optional properties:
 
 	In fiber mode, auto-negotiation is disabled and the PHY can only work in
 	100base-fx (full and half duplex) modes.
+
+ - coma-mode-gpios: If present the given gpio will be deasserted when the
+		    PHY is probed.
+
+	Some PHYs have a COMA mode input pin which puts the PHY into
+	isolate and power-down mode. On some boards this input is connected
+	to a GPIO of the SoC.
+
+	Supported on the LAN8814.
diff --git a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
new file mode 100644
index 000000000000..cf91fecd8909
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,lan95xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The device tree bindings for the USB Ethernet controllers
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  Device tree properties for hard wired SMSC95xx compatible USB Ethernet
+  controller.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - usb424,9500   # SMSC9500 USB Ethernet Device
+          - usb424,9505   # SMSC9505 USB Ethernet Device
+          - usb424,9530   # SMSC LAN9530 USB Ethernet Device
+          - usb424,9730   # SMSC LAN9730 USB Ethernet Device
+          - usb424,9900   # SMSC9500 USB Ethernet Device (SAL10)
+          - usb424,9901   # SMSC9505 USB Ethernet Device (SAL10)
+          - usb424,9902   # SMSC9500A USB Ethernet Device (SAL10)
+          - usb424,9903   # SMSC9505A USB Ethernet Device (SAL10)
+          - usb424,9904   # SMSC9512/9514 USB Hub & Ethernet Device (SAL10)
+          - usb424,9905   # SMSC9500A USB Ethernet Device (HAL)
+          - usb424,9906   # SMSC9505A USB Ethernet Device (HAL)
+          - usb424,9907   # SMSC9500 USB Ethernet Device (Alternate ID)
+          - usb424,9908   # SMSC9500A USB Ethernet Device (Alternate ID)
+          - usb424,9909   # SMSC9512/9514 USB Hub & Ethernet Devic.  ID)
+          - usb424,9e00   # SMSC9500A USB Ethernet Device
+          - usb424,9e01   # SMSC9505A USB Ethernet Device
+          - usb424,9e08   # SMSC LAN89530 USB Ethernet Device
+          - usb424,ec00   # SMSC9512/9514 USB Hub & Ethernet Device
+
+  reg: true
+  local-mac-address: true
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+            compatible = "usb424,9e00";
+            reg = <1>;
+            local-mac-address = [00 00 00 00 00 00];
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
new file mode 100644
index 000000000000..dc116f14750e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,lan966x-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Lan966x Ethernet switch controller
+
+maintainers:
+  - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+  The lan966x switch is a multi-port Gigabit AVB/TSN Ethernet Switch with
+  two integrated 10/100/1000Base-T PHYs. In addition to the integrated PHYs,
+  it supports up to 2RGMII/RMII, up to 3BASE-X/SERDES/2.5GBASE-X and up to
+  2 Quad-SGMII/Quad-USGMII interfaces.
+
+properties:
+  $nodename:
+    pattern: "^switch@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,lan966x-switch
+
+  reg:
+    items:
+      - description: cpu target
+      - description: general control block target
+
+  reg-names:
+    items:
+      - const: cpu
+      - const: gcb
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: register based extraction
+      - description: frame dma based extraction
+      - description: analyzer interrupt
+      - description: ptp interrupt
+      - description: ptp external interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: xtr
+      - const: fdma
+      - const: ana
+      - const: ptp
+      - const: ptp-ext
+
+  resets:
+    items:
+      - description: Reset controller used for switch core reset (soft reset)
+
+  reset-names:
+    items:
+      - const: switch
+
+  ethernet-ports:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    additionalProperties: false
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        type: object
+
+        $ref: "/schemas/net/ethernet-controller.yaml#"
+        unevaluatedProperties: false
+
+        properties:
+          '#address-cells':
+            const: 1
+          '#size-cells':
+            const: 0
+
+          reg:
+            description:
+              Switch port number
+
+          phys:
+            description:
+              Phandle of a Ethernet SerDes PHY
+
+          phy-mode:
+            description:
+              This specifies the interface used by the Ethernet SerDes towards
+              the PHY or SFP.
+            enum:
+              - gmii
+              - sgmii
+              - qsgmii
+              - 1000base-x
+              - 2500base-x
+
+          phy-handle:
+            description:
+              Phandle of a Ethernet PHY.
+
+          sfp:
+            description:
+              Phandle of an SFP.
+
+          managed: true
+
+        required:
+          - reg
+          - phys
+          - phy-mode
+
+        oneOf:
+          - required:
+              - phy-handle
+          - required:
+              - sfp
+              - managed
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - resets
+  - reset-names
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    switch: switch@e0000000 {
+      compatible = "microchip,lan966x-switch";
+      reg =  <0xe0000000 0x0100000>,
+             <0xe2000000 0x0800000>;
+      reg-names = "cpu", "gcb";
+      interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "xtr";
+      resets = <&switch_reset 0>;
+      reset-names = "switch";
+      ethernet-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port0: port@0 {
+          reg = <0>;
+          phy-handle = <&phy0>;
+          phys = <&serdes 0 0>;
+          phy-mode = "gmii";
+        };
+
+        port1: port@1 {
+          reg = <1>;
+          sfp = <&sfp_eth1>;
+          managed = "in-band-status";
+          phys = <&serdes 2 4>;
+          phy-mode = "sgmii";
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
new file mode 100644
index 000000000000..57ffeb8fc876
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,sparx5-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Ethernet switch controller
+
+maintainers:
+  - Steen Hegelund <steen.hegelund@microchip.com>
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  The SparX-5 Enterprise Ethernet switch family provides a rich set of
+  Enterprise switching features such as advanced TCAM-based VLAN and
+  QoS processing enabling delivery of differentiated services, and
+  security through TCAM-based frame processing using versatile content
+  aware processor (VCAP).
+
+  IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported
+  with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K
+  IPv6 (S,G) multicast groups.
+
+  L3 security features include source guard and reverse path
+  forwarding (uRPF) tasks. Additional L3 features include VRF-Lite and
+  IP tunnels (IP over GRE/IP).
+
+  The SparX-5 switch family targets managed Layer 2 and Layer 3
+  equipment in SMB, SME, and Enterprise where high port count
+  1G/2.5G/5G/10G switching with 10G/25G aggregation links is required.
+
+properties:
+  $nodename:
+    pattern: "^switch@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,sparx5-switch
+
+  reg:
+    items:
+      - description: cpu target
+      - description: devices target
+      - description: general control block target
+
+  reg-names:
+    items:
+      - const: cpu
+      - const: devices
+      - const: gcb
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: register based extraction
+      - description: frame dma based extraction
+      - description: ptp interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: xtr
+      - const: fdma
+      - const: ptp
+
+  resets:
+    items:
+      - description: Reset controller used for switch core reset (soft reset)
+
+  reset-names:
+    items:
+      - const: switch
+
+  mac-address: true
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        $ref: /schemas/net/ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            description: Switch port number
+
+          phys:
+            maxItems: 1
+            description:
+              phandle of a Ethernet SerDes PHY.  This defines which SerDes
+              instance will handle the Ethernet traffic.
+
+          microchip,bandwidth:
+            description: Specifies bandwidth in Mbit/s allocated to the port.
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            maximum: 25000
+
+          microchip,sd-sgpio:
+            description:
+              Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs
+              This is optional, and only needed if the default used index is
+              is not correct.
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            minimum: 0
+            maximum: 383
+
+        required:
+          - reg
+          - phys
+          - phy-mode
+          - microchip,bandwidth
+
+        oneOf:
+          - required:
+              - phy-handle
+          - required:
+              - sfp
+              - managed
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    switch: switch@600000000 {
+      compatible = "microchip,sparx5-switch";
+      reg =  <0 0x401000>,
+             <0x10004000 0x7fc000>,
+             <0x11010000 0xaf0000>;
+      reg-names = "cpu", "devices", "gcb";
+      interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "xtr";
+      resets = <&reset 0>;
+      reset-names = "switch";
+      ethernet-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port0: port@0 {
+          reg = <0>;
+          microchip,bandwidth = <1000>;
+          phys = <&serdes 13>;
+          phy-handle = <&phy0>;
+          phy-mode = "qsgmii";
+        };
+        /* ... */
+        /* Then the 25G interfaces */
+        port60: port@60 {
+          reg = <60>;
+          microchip,bandwidth = <25000>;
+          phys = <&serdes 29>;
+          phy-mode = "10gbase-r";
+          sfp = <&sfp_eth60>;
+          managed = "in-band-status";
+          microchip,sd-sgpio = <365>;
+        };
+        port61: port@61 {
+          reg = <61>;
+          microchip,bandwidth = <25000>;
+          phys = <&serdes 30>;
+          phy-mode = "10gbase-r";
+          sfp = <&sfp_eth61>;
+          managed = "in-band-status";
+          microchip,sd-sgpio = <369>;
+        };
+        port62: port@62 {
+          reg = <62>;
+          microchip,bandwidth = <25000>;
+          phys = <&serdes 31>;
+          phy-mode = "10gbase-r";
+          sfp = <&sfp_eth62>;
+          managed = "in-band-status";
+          microchip,sd-sgpio = <373>;
+        };
+        port63: port@63 {
+          reg = <63>;
+          microchip,bandwidth = <25000>;
+          phys = <&serdes 32>;
+          phy-mode = "10gbase-r";
+          sfp = <&sfp_eth63>;
+          managed = "in-band-status";
+          microchip,sd-sgpio = <377>;
+        };
+        /* Finally the Management interface */
+        port64: port@64 {
+          reg = <64>;
+          microchip,bandwidth = <1000>;
+          phys = <&serdes 0>;
+          phy-handle = <&phy64>;
+          phy-mode = "sgmii";
+          mac-address = [ 00 00 00 01 02 03 ];
+        };
+      };
+    };
+
+...
+#  vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :
diff --git a/Documentation/devicetree/bindings/net/mscc,miim.yaml b/Documentation/devicetree/bindings/net/mscc,miim.yaml
new file mode 100644
index 000000000000..2c451cfa4e0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc,miim.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mscc,miim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi MII Management Controller (MIIM)
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - mscc,ocelot-miim
+      - microchip,lan966x-miim
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    items:
+      - description: base address
+      - description: associated reset register for internal PHYs
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@107009c {
+      compatible = "mscc,ocelot-miim";
+      reg = <0x107009c 0x36>, <0x10700f0 0x8>;
+      interrupts = <14>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      phy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
new file mode 100644
index 000000000000..ee0a504bdb24
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mscc,vsc7514-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip VSC7514 Ethernet switch controller
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+  - Claudiu Manoil <claudiu.manoil@nxp.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+  Bindings for the Microchip VSC7514 switch driver
+
+  The VSC7514 switch driver handles up to 11 ports and can inject/extract
+  packets using CPU. Additionally, PTP is supported as well as FDMA for faster
+  packet extraction/injection.
+
+properties:
+  $nodename:
+    pattern: "^switch@[0-9a-f]+$"
+
+  compatible:
+    const: mscc,vsc7514-switch
+
+  reg:
+    items:
+      - description: system target
+      - description: rewriter target
+      - description: qs target
+      - description: PTP target
+      - description: Port0 target
+      - description: Port1 target
+      - description: Port2 target
+      - description: Port3 target
+      - description: Port4 target
+      - description: Port5 target
+      - description: Port6 target
+      - description: Port7 target
+      - description: Port8 target
+      - description: Port9 target
+      - description: Port10 target
+      - description: QSystem target
+      - description: Analyzer target
+      - description: S0 target
+      - description: S1 target
+      - description: S2 target
+      - description: fdma target
+
+  reg-names:
+    items:
+      - const: sys
+      - const: rew
+      - const: qs
+      - const: ptp
+      - const: port0
+      - const: port1
+      - const: port2
+      - const: port3
+      - const: port4
+      - const: port5
+      - const: port6
+      - const: port7
+      - const: port8
+      - const: port9
+      - const: port10
+      - const: qsys
+      - const: ana
+      - const: s0
+      - const: s1
+      - const: s2
+      - const: fdma
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: PTP ready
+      - description: register based extraction
+      - description: frame dma based extraction
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: ptp_rdy
+      - const: xtr
+      - const: fdma
+
+  ethernet-ports:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    additionalProperties: false
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        type: object
+        description: Ethernet ports handled by the switch
+
+        $ref: ethernet-controller.yaml#
+
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            description: Switch port number
+
+          phy-handle: true
+
+          phy-mode: true
+
+          fixed-link: true
+
+          mac-address: true
+
+        required:
+          - reg
+          - phy-mode
+
+        oneOf:
+          - required:
+              - phy-handle
+          - required:
+              - fixed-link
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    switch@1010000 {
+      compatible = "mscc,vsc7514-switch";
+      reg = <0x1010000 0x10000>,
+            <0x1030000 0x10000>,
+            <0x1080000 0x100>,
+            <0x10e0000 0x10000>,
+            <0x11e0000 0x100>,
+            <0x11f0000 0x100>,
+            <0x1200000 0x100>,
+            <0x1210000 0x100>,
+            <0x1220000 0x100>,
+            <0x1230000 0x100>,
+            <0x1240000 0x100>,
+            <0x1250000 0x100>,
+            <0x1260000 0x100>,
+            <0x1270000 0x100>,
+            <0x1280000 0x100>,
+            <0x1800000 0x80000>,
+            <0x1880000 0x10000>,
+            <0x1040000 0x10000>,
+            <0x1050000 0x10000>,
+            <0x1060000 0x10000>,
+            <0x1a0 0x1c4>;
+      reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
+            "port2", "port3", "port4", "port5", "port6",
+            "port7", "port8", "port9", "port10", "qsys",
+            "ana", "s0", "s1", "s2", "fdma";
+      interrupts = <18 21 16>;
+      interrupt-names = "ptp_rdy", "xtr", "fdma";
+
+      ethernet-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port0: port@0 {
+          reg = <0>;
+          phy-handle = <&phy0>;
+          phy-mode = "internal";
+        };
+        port1: port@1 {
+          reg = <1>;
+          phy-handle = <&phy1>;
+          phy-mode = "internal";
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/mscc-miim.txt b/Documentation/devicetree/bindings/net/mscc-miim.txt
deleted file mode 100644
index 7104679cf59d..000000000000
--- a/Documentation/devicetree/bindings/net/mscc-miim.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Microsemi MII Management Controller (MIIM) / MDIO
-=================================================
-
-Properties:
-- compatible: must be "mscc,ocelot-miim"
-- reg: The base address of the MDIO bus controller register bank. Optionally, a
-  second register bank can be defined if there is an associated reset register
-  for internal PHYs
-- #address-cells: Must be <1>.
-- #size-cells: Must be <0>.  MDIO addresses have no size component.
-- interrupts: interrupt specifier (refer to the interrupt binding)
-
-Typically an MDIO bus might have several children.
-
-Example:
-	mdio@107009c {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "mscc,ocelot-miim";
-		reg = <0x107009c 0x36>, <0x10700f0 0x8>;
-		interrupts = <14>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
deleted file mode 100644
index 3b6290b45ce5..000000000000
--- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Microsemi Ocelot network Switch
-===============================
-
-The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513,
-VSC7514)
-
-Required properties:
-- compatible: Should be "mscc,vsc7514-switch"
-- reg: Must contain an (offset, length) pair of the register set for each
-  entry in reg-names.
-- reg-names: Must include the following entries:
-  - "sys"
-  - "rew"
-  - "qs"
-  - "ptp" (optional due to backward compatibility)
-  - "qsys"
-  - "ana"
-  - "portX" with X from 0 to the number of last port index available on that
-    switch
-- interrupts: Should contain the switch interrupts for frame extraction,
-  frame injection and PTP ready.
-- interrupt-names: should contain the interrupt names: "xtr", "inj". Can contain
-  "ptp_rdy" which is optional due to backward compatibility.
-- ethernet-ports: A container for child nodes representing switch ports.
-
-The ethernet-ports container has the following properties
-
-Required properties:
-
-- #address-cells: Must be 1
-- #size-cells: Must be 0
-
-Each port node must have the following mandatory properties:
-- reg: Describes the port address in the switch
-
-Port nodes may also contain the following optional standardised
-properties, described in binding documents:
-
-- phy-handle: Phandle to a PHY on an MDIO bus. See
-  Documentation/devicetree/bindings/net/ethernet.txt for details.
-
-Example:
-
-	switch@1010000 {
-		compatible = "mscc,vsc7514-switch";
-		reg = <0x1010000 0x10000>,
-		      <0x1030000 0x10000>,
-		      <0x1080000 0x100>,
-		      <0x10e0000 0x10000>,
-		      <0x11e0000 0x100>,
-		      <0x11f0000 0x100>,
-		      <0x1200000 0x100>,
-		      <0x1210000 0x100>,
-		      <0x1220000 0x100>,
-		      <0x1230000 0x100>,
-		      <0x1240000 0x100>,
-		      <0x1250000 0x100>,
-		      <0x1260000 0x100>,
-		      <0x1270000 0x100>,
-		      <0x1280000 0x100>,
-		      <0x1800000 0x80000>,
-		      <0x1880000 0x10000>;
-		reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
-			    "port2", "port3", "port4", "port5", "port6",
-			    "port7", "port8", "port9", "port10", "qsys",
-			    "ana";
-		interrupts = <18 21 22>;
-		interrupt-names = "ptp_rdy", "xtr", "inj";
-
-		ethernet-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port0: port@0 {
-				reg = <0>;
-				phy-handle = <&phy0>;
-			};
-			port1: port@1 {
-				reg = <1>;
-				phy-handle = <&phy1>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
index 5ff37c68c941..0a3647fe331b 100644
--- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
+++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
@@ -31,6 +31,8 @@ Optional properties:
 			  VSC8531_LINK_100_ACTIVITY (2),
 			  VSC8531_LINK_ACTIVITY (0) and
 			  VSC8531_DUPLEX_COLLISION (8).
+- load-save-gpios	: GPIO used for the load/save operation of the PTP
+			  hardware clock (PHC).
 
 
 Table: 1 - Edge rate change
@@ -65,6 +67,7 @@ Example:
                 compatible = "ethernet-phy-id0007.0570";
                 vsc8531,vddmac		= <3300>;
                 vsc8531,edge-slowdown	= <7>;
-                vsc8531,led-0-mode	= <LINK_1000_ACTIVITY>;
-                vsc8531,led-1-mode	= <LINK_100_ACTIVITY>;
+                vsc8531,led-0-mode	= <VSC8531_LINK_1000_ACTIVITY>;
+                vsc8531,led-1-mode	= <VSC8531_LINK_100_ACTIVITY>;
+		load-save-gpios		= <&gpio 10 GPIO_ACTIVE_HIGH>;
         };
diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
new file mode 100644
index 000000000000..308485a8ee6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/marvell,nci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell International Ltd. NCI NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - marvell,nfc-i2c
+      - marvell,nfc-spi
+      - marvell,nfc-uart
+
+  hci-muxed:
+    type: boolean
+    description: |
+      Specifies that the chip is muxing NCI over HCI frames
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  reset-n-io:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    maxItems: 1
+    description: |
+      Output GPIO pin used to reset the chip (active low)
+
+  i2c-int-falling:
+    type: boolean
+    description: |
+      For I2C type of connection. Specifies that the chip read event shall be
+      trigged on falling edge.
+
+  i2c-int-rising:
+    type: boolean
+    description: |
+      For I2C type of connection.  Specifies that the chip read event shall be
+      trigged on rising edge.
+
+  break-control:
+    type: boolean
+    description: |
+      For UART type of connection. Specifies that the chip needs specific break
+      management.
+
+  flow-control:
+    type: boolean
+    description: |
+      For UART type of connection. Specifies that the chip is using RTS/CTS.
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,nfc-i2c
+    then:
+      properties:
+        break-control: false
+        flow-control: false
+        spi-cpha: false
+        spi-cpol: false
+        spi-max-frequency: false
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,nfc-spi
+    then:
+      $ref: /schemas/spi/spi-peripheral-props.yaml#
+      properties:
+        break-control: false
+        flow-control: false
+        i2c-int-falling: false
+        i2c-int-rising: false
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,nfc-uart
+    then:
+      properties:
+        i2c-int-falling: false
+        i2c-int-rising: false
+        interrupts: false
+        spi-cpha: false
+        spi-cpol: false
+        spi-max-frequency: false
+        reg: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@8 {
+            compatible = "marvell,nfc-i2c";
+            reg = <0x8>;
+
+            interrupt-parent = <&gpio3>;
+            interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+            i2c-int-rising;
+
+            reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@0 {
+            compatible = "marvell,nfc-spi";
+            reg = <0>;
+
+            spi-max-frequency = <3000000>;
+            spi-cpha;
+            spi-cpol;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+
+            reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    uart {
+        nfc {
+            compatible = "marvell,nfc-uart";
+
+            reset-n-io = <&gpio3 16 GPIO_ACTIVE_LOW>;
+
+            hci-muxed;
+            flow-control;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt
deleted file mode 100644
index c9b35251bb20..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-* Marvell International Ltd. NCI NFC Controller
-
-Required properties:
-- compatible: Should be:
-  - "marvell,nfc-uart" or "mrvl,nfc-uart" for UART devices
-  - "marvell,nfc-i2c" for I2C devices
-  - "marvell,nfc-spi" for SPI devices
-
-Optional SoC specific properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- reset-n-io: Output GPIO pin used to reset the chip (active low).
-- hci-muxed: Specifies that the chip is muxing NCI over HCI frames.
-
-Optional UART-based chip specific properties:
-- flow-control: Specifies that the chip is using RTS/CTS.
-- break-control: Specifies that the chip needs specific break management.
-
-Optional I2C-based chip specific properties:
-- i2c-int-falling: Specifies that the chip read event shall be trigged on
-  		   falling edge.
-- i2c-int-rising: Specifies that the chip read event shall be trigged on
-  		  rising edge.
-
-Example (for ARM-based BeagleBoard Black with 88W8887 on UART5):
-
-&uart5 {
-
-	nfcmrvluart: nfcmrvluart@5 {
-		compatible = "marvell,nfc-uart";
-
-		reset-n-io = <&gpio3 16 0>;
-
-		hci-muxed;
-		flow-control;
-        }
-};
-
-
-Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1):
-
-&i2c1 {
-	clock-frequency = <400000>;
-
-	nfcmrvli2c0: i2c@1 {
-		compatible = "marvell,nfc-i2c";
-
-		reg = <0x8>;
-
-		/* I2C INT configuration */
-		interrupt-parent = <&gpio3>;
-		interrupts = <21 0>;
-
-		/* I2C INT trigger configuration */
-		i2c-int-rising;
-
-		/* Reset IO */
-		reset-n-io = <&gpio3 19 0>;
-	};
-};
-
-
-Example (for ARM-based BeagleBoard Black on SPI0):
-
-&spi0 {
-
-	mrvlnfcspi0: spi@0 {
-		compatible = "marvell,nfc-spi";
-
-		reg = <0>;
-
-		/* SPI Bus configuration */
-		spi-max-frequency = <3000000>;
-		spi-cpha;
-		spi-cpol;
-
-		/* SPI INT configuration */
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 0>;
-
-		/* Reset IO */
-       		reset-n-io = <&gpio3 19 0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
new file mode 100644
index 000000000000..b2558421268a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/nxp,nci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Semiconductors NCI NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nxp,nxp-nci-i2c
+      - items:
+          - const: nxp,pn547
+          - const: nxp,nxp-nci-i2c
+
+  enable-gpios:
+    description: Output GPIO pin used for enabling/disabling the controller
+
+  firmware-gpios:
+    description: Output GPIO pin used to enter firmware download mode
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - enable-gpios
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@29 {
+            compatible = "nxp,nxp-nci-i2c";
+
+            reg = <0x29>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+
+            enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+            firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml
new file mode 100644
index 000000000000..0509e0166345
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/nxp,pn532.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Semiconductors PN532 NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nxp,pn532
+      - description: Deprecated bindings
+        enum:
+          - nxp,pn532-i2c
+          - nxp,pn533-i2c
+        deprecated: true
+
+  interrupts:
+    description: Required if connected via I2C
+    maxItems: 1
+
+  reg:
+    description: Required if connected via I2C
+    maxItems: 1
+
+required:
+  - compatible
+
+dependencies:
+  interrupts: [ 'reg' ]
+
+additionalProperties: false
+
+examples:
+  # PN532 on I2C bus
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@24 {
+            compatible = "nxp,pn532";
+
+            reg = <0x24>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+
+  # PN532 connected via UART
+  - |
+    serial@49042000 {
+        reg = <0x49042000 0x400>;
+
+        nfc {
+            compatible = "nxp,pn532";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
new file mode 100644
index 000000000000..18b3a7d819df
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/nxp,pn544.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Semiconductors PN544 NFC Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: nxp,pn544-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  enable-gpios:
+    description: Output GPIO pin used for enabling/disabling the PN544
+    maxItems: 1
+
+  firmware-gpios:
+    description: Output GPIO pin used to enter firmware download mode
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - enable-gpios
+  - firmware-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@28 {
+            compatible = "nxp,pn544-i2c";
+            reg = <0x28>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+
+            enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+            firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
deleted file mode 100644
index cfaf88998918..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* NXP Semiconductors NXP NCI NFC Controllers
-
-Required properties:
-- compatible: Should be "nxp,nxp-nci-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- enable-gpios: Output GPIO pin used for enabling/disabling the chip
-- firmware-gpios: Output GPIO pin used to enter firmware download mode
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2):
-
-&i2c2 {
-
-
-	npc100: npc100@29 {
-
-		compatible = "nxp,nxp-nci-i2c";
-
-		reg = <0x29>;
-		clock-frequency = <100000>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <29 GPIO_ACTIVE_HIGH>;
-
-		enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/pn532.txt b/Documentation/devicetree/bindings/net/nfc/pn532.txt
deleted file mode 100644
index a5507dc499bc..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/pn532.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* NXP Semiconductors PN532 NFC Controller
-
-Required properties:
-- compatible: Should be
-    - "nxp,pn532" Place a node with this inside the devicetree node of the bus
-                  where the NFC chip is connected to.
-                  Currently the kernel has phy bindings for uart and i2c.
-    - "nxp,pn532-i2c" (DEPRECATED) only works for the i2c binding.
-    - "nxp,pn533-i2c" (DEPRECATED) only works for the i2c binding.
-
-Required properties if connected on i2c:
-- clock-frequency: I²C work frequency.
-- reg: for the I²C bus address. This is fixed at 0x24 for the PN532.
-- interrupts: GPIO interrupt to which the chip is connected
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBone with PN532 on I2C2):
-
-&i2c2 {
-
-
-	pn532: nfc@24 {
-
-		compatible = "nxp,pn532";
-
-		reg = <0x24>;
-		clock-frequency = <400000>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
-
-	};
-};
-
-Example (for PN532 connected via uart):
-
-uart4: serial@49042000 {
-        compatible = "ti,omap3-uart";
-
-        pn532: nfc {
-                compatible = "nxp,pn532";
-        };
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
deleted file mode 100644
index 92f399ec22b8..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* NXP Semiconductors PN544 NFC Controller
-
-Required properties:
-- compatible: Should be "nxp,pn544-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- enable-gpios: Output GPIO pin used for enabling/disabling the PN544
-- firmware-gpios: Output GPIO pin used to enter firmware download mode
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBone with PN544 on I2C2):
-
-&i2c2 {
-
-
-	pn544: pn544@28 {
-
-		compatible = "nxp,pn544-i2c";
-
-		reg = <0x28>;
-		clock-frequency = <400000>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 GPIO_ACTIVE_HIGH>;
-
-		enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-		firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
deleted file mode 100644
index f02f6fb7f81c..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Samsung S3FWRN5 NCI NFC Controller
-
-Required properties:
-- compatible: Should be "samsung,s3fwrn5-i2c".
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
-- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
-  sleep/wakeup control
-
-Example:
-
-&hsi2c_4 {
-	s3fwrn5@27 {
-		compatible = "samsung,s3fwrn5-i2c";
-
-		reg = <0x27>;
-
-		interrupt-parent = <&gpa1>;
-		interrupts = <3 0 0>;
-
-		s3fwrn5,en-gpios = <&gpf1 4 0>;
-		s3fwrn5,fw-gpios = <&gpj0 2 0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
new file mode 100644
index 000000000000..41c9760227cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/samsung,s3fwrn5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3FWRN5 NCI NFC Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3fwrn5-i2c
+      - samsung,s3fwrn82
+
+  en-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin used for enabling/disabling the chip
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin used to enter firmware mode and sleep/wakeup control
+
+  s3fwrn5,en-gpios:
+    maxItems: 1
+    deprecated: true
+    description:
+      Use en-gpios
+
+  s3fwrn5,fw-gpios:
+    maxItems: 1
+    deprecated: true
+    description:
+      Use wake-gpios
+
+additionalProperties: false
+
+required:
+  - compatible
+  - en-gpios
+  - wake-gpios
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s3fwrn5-i2c
+    then:
+      required:
+        - interrupts
+        - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c4 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        s3fwrn5@27 {
+            compatible = "samsung,s3fwrn5-i2c";
+            reg = <0x27>;
+
+            interrupt-parent = <&gpa1>;
+            interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+            en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+            wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+
+            clocks = <&rpmcc 20>;
+        };
+    };
+  # UART example on Raspberry Pi
+  - |
+    uart0 {
+        nfc {
+            compatible = "samsung,s3fwrn82";
+
+            en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+            wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
new file mode 100644
index 000000000000..1dcbddbc5a74
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/st,st-nci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics ST NCI NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - st,st21nfcb-i2c
+      - st,st21nfcb-spi
+      - st,st21nfcc-i2c
+
+  reset-gpios:
+    description: Output GPIO pin used for resetting the controller
+
+  ese-present:
+    type: boolean
+    description: |
+      Specifies that an ese is physically connected to the controller
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  uicc-present:
+    type: boolean
+    description: |
+      Specifies that the uicc swp signal can be physically connected to the
+      controller
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - reset-gpios
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,st21nfcb-i2c
+          - st,st21nfcc-i2c
+then:
+  properties:
+    spi-max-frequency: false
+else:
+  $ref: /schemas/spi/spi-peripheral-props.yaml#
+  required:
+    - spi-max-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@8 {
+            compatible = "st,st21nfcb-i2c";
+            reg = <0x08>;
+
+            interrupt-parent = <&gpio5>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+            reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+            ese-present;
+            uicc-present;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@0 {
+            compatible = "st,st21nfcb-spi";
+            reg = <0>;
+
+            spi-max-frequency = <4000000>;
+
+            interrupt-parent = <&gpio5>;
+            interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+            ese-present;
+            uicc-present;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml
new file mode 100644
index 000000000000..8a7274357b46
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/st,st21nfca.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics SAS ST21NFCA NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: st,st21nfca-i2c
+
+  enable-gpios:
+    description: Output GPIO pin used for enabling/disabling the controller
+
+  ese-present:
+    type: boolean
+    description: |
+      Specifies that an ese is physically connected to the controller
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  uicc-present:
+    type: boolean
+    description: |
+      Specifies that the uicc swp signal can be physically connected to the
+      controller
+
+required:
+  - compatible
+  - enable-gpios
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@1 {
+            compatible = "st,st21nfca-i2c";
+            reg = <0x1>;
+
+            interrupt-parent = <&gpio5>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+            enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+            ese-present;
+            uicc-present;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml
new file mode 100644
index 000000000000..647569051ed8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/st,st95hf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics ST95HF NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: st,st95hf
+
+  enable-gpio:
+    description: Output GPIO pin used for enabling/disabling the controller
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  st95hfvin-supply:
+    description: ST95HF transceiver's Vin regulator supply
+
+required:
+  - compatible
+  - enable-gpio
+  - interrupts
+  - reg
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@0{
+            compatible = "st,st95hf";
+            reg = <0>;
+
+            spi-max-frequency = <1000000>;
+            enable-gpio = <&pio4 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&pio0>;
+            interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
deleted file mode 100644
index baa8f8133d19..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* STMicroelectronics SAS. ST NCI NFC Controller
-
-Required properties:
-- compatible: Should be "st,st21nfcb-i2c" or "st,st21nfcc-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- reset-gpios: Output GPIO pin used to reset the ST21NFCB
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- ese-present: Specifies that an ese is physically connected to the nfc
-controller.
-- uicc-present: Specifies that the uicc swp signal can be physically
-connected to the nfc controller.
-
-Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
-
-&i2c2 {
-
-
-	st21nfcb: st21nfcb@8 {
-
-		compatible = "st,st21nfcb-i2c";
-
-		reg = <0x08>;
-		clock-frequency = <400000>;
-
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-
-		reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-
-		ese-present;
-		uicc-present;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
deleted file mode 100644
index d33343330b94..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* STMicroelectronics SAS. ST NCI NFC Controller
-
-Required properties:
-- compatible: Should be "st,st21nfcb-spi"
-- spi-max-frequency: Maximum SPI frequency (<= 4000000).
-- interrupts: GPIO interrupt to which the chip is connected
-- reset-gpios: Output GPIO pin used to reset the ST21NFCB
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- ese-present: Specifies that an ese is physically connected to the nfc
-controller.
-- uicc-present: Specifies that the uicc swp signal can be physically
-connected to the nfc controller.
-
-Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4):
-
-&mcspi4 {
-
-
-	st21nfcb: st21nfcb@0 {
-
-		compatible = "st,st21nfcb-spi";
-
-		clock-frequency = <4000000>;
-
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
-
-		reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-
-		ese-present;
-		uicc-present;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
deleted file mode 100644
index b8bd90f80e12..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* STMicroelectronics SAS. ST21NFCA NFC Controller
-
-Required properties:
-- compatible: Should be "st,st21nfca-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- enable-gpios: Output GPIO pin used for enabling/disabling the ST21NFCA
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- ese-present: Specifies that an ese is physically connected to the nfc
-controller.
-- uicc-present: Specifies that the uicc swp signal can be physically
-connected to the nfc controller.
-
-Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
-
-&i2c2 {
-
-
-	st21nfca: st21nfca@1 {
-
-		compatible = "st,st21nfca-i2c";
-
-		reg = <0x01>;
-		clock-frequency = <400000>;
-
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
-		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-
-		ese-present;
-		uicc-present;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt
deleted file mode 100644
index 3f373a1e20ff..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/st95hf.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* STMicroelectronics : NFC Transceiver ST95HF
-
-ST NFC Transceiver is required to attach with SPI bus.
-ST95HF node should be defined in DT as SPI slave device of SPI
-master with which ST95HF transceiver is physically connected.
-The properties defined below are required to be the part of DT
-to include ST95HF transceiver into the platform.
-
-Required properties:
-===================
-- reg: Address of SPI slave "ST95HF transceiver" on SPI master bus.
-
-- compatible: should be "st,st95hf" for ST95HF NFC transceiver
-
-- spi-max-frequency: Max. operating SPI frequency for ST95HF
-	transceiver.
-
-- enable-gpio: GPIO line to enable ST95HF transceiver.
-
-- interrupts : Standard way to define ST95HF transceiver's out
-	interrupt.
-
-Optional property:
-=================
-- st95hfvin-supply : This is an optional property. It contains a
-	phandle to ST95HF transceiver's regulator supply node in DT.
-
-Example:
-=======
-spi@9840000 {
-	reg = <0x9840000 0x110>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	cs-gpios = <&pio0 4>;
-
-	st95hf@0{
-		reg = <0>;
-		compatible = "st,st95hf";
-		spi-max-frequency = <1000000>;
-		enable-gpio = <&pio4 0>;
-		interrupt-parent = <&pio0>;
-		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
new file mode 100644
index 000000000000..9cc236ec42f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/ti,trf7970a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TRF7970A RFID/NFC/15693 Transceiver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Mark Greer <mgreer@animalcreek.com>
+
+properties:
+  compatible:
+    const: ti,trf7970a
+
+  autosuspend-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify autosuspend delay in milliseconds.
+
+  clock-frequency:
+    description: |
+      Set to specify that the input frequency to the trf7970a is 13560000Hz or
+      27120000Hz
+
+  en2-rf-quirk:
+    type: boolean
+    description: |
+      Specify that the trf7970a being used has the "EN2 RF" erratum
+
+  interrupts:
+    maxItems: 1
+
+  irq-status-read-quirk:
+    type: boolean
+    description: |
+      Specify that the trf7970a being used has the "IRQ Status Read" erratum
+
+  reg:
+    maxItems: 1
+
+  ti,enable-gpios:
+    minItems: 1
+    maxItems: 2
+    description: |
+      One or two GPIO entries used for 'EN' and 'EN2' pins on the TRF7970A. EN2
+      is optional.
+
+  vdd-io-supply:
+    description: |
+      Regulator specifying voltage for VDD-IO
+
+  vin-supply:
+    description: |
+      Regulator for supply voltage to VIN pin
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - spi-max-frequency
+  - ti,enable-gpios
+  - vin-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@0 {
+            compatible = "ti,trf7970a";
+            reg = <0>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&trf7970a_default>;
+            spi-max-frequency = <2000000>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <14 0>;
+
+            ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
+                              <&gpio2 5 GPIO_ACTIVE_HIGH>;
+            vin-supply = <&ldo3_reg>;
+            vdd-io-supply = <&ldo2_reg>;
+            autosuspend-delay = <30000>;
+            irq-status-read-quirk;
+            en2-rf-quirk;
+            clock-frequency = <27120000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
deleted file mode 100644
index ba1934b950e5..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Texas Instruments TRF7970A RFID/NFC/15693 Transceiver
-
-Required properties:
-- compatible: Should be "ti,trf7970a".
-- spi-max-frequency: Maximum SPI frequency (<= 2000000).
-- interrupts: A single interrupt specifier.
-- ti,enable-gpios: One or two GPIO entries used for 'EN' and 'EN2' pins on the
-  TRF7970A. EN2 is optional.
-- vin-supply: Regulator for supply voltage to VIN pin
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- autosuspend-delay: Specify autosuspend delay in milliseconds.
-- irq-status-read-quirk: Specify that the trf7970a being used has the
-  "IRQ Status Read" erratum.
-- en2-rf-quirk: Specify that the trf7970a being used has the "EN2 RF"
-  erratum.
-- vdd-io-supply: Regulator specifying voltage for vdd-io
-- clock-frequency: Set to specify that the input frequency to the trf7970a is 13560000Hz or 27120000Hz
-
-Example (for ARM-based BeagleBone with TRF7970A on SPI1):
-
-&spi1 {
-
-	nfc@0 {
-		compatible = "ti,trf7970a";
-		reg = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&trf7970a_default>;
-		spi-max-frequency = <2000000>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <14 0>;
-		ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
-				  <&gpio2 5 GPIO_ACTIVE_HIGH>;
-		vin-supply = <&ldo3_reg>;
-		vdd-io-supply = <&ldo2_reg>;
-		autosuspend-delay = <30000>;
-		irq-status-read-quirk;
-		en2-rf-quirk;
-		clock-frequency = <27120000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
new file mode 100644
index 000000000000..2bd3efff2485
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nvidia,tegra234-mgbe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra234 MGBE Multi-Gigabit Ethernet Controller
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra234-mgbe
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: hypervisor
+      - const: mac
+      - const: xpcs
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: common
+      - const: macsec-ns
+      - const: macsec
+
+  clocks:
+    maxItems: 12
+
+  clock-names:
+    items:
+      - const: mgbe
+      - const: mac
+      - const: mac-divider
+      - const: ptp-ref
+      - const: rx-input-m
+      - const: rx-input
+      - const: tx
+      - const: eee-pcs
+      - const: rx-pcs-input
+      - const: rx-pcs-m
+      - const: rx-pcs
+      - const: tx-pcs
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: mac
+      - const: pcs
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  phy-handle: true
+
+  phy-mode:
+    contains:
+      enum:
+        - usxgmii
+        - 10gbase-kr
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Optional node for embedded MDIO controller.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - phy-handle
+  - phy-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    ethernet@6800000 {
+        compatible = "nvidia,tegra234-mgbe";
+        reg = <0x06800000 0x10000>,
+              <0x06810000 0x10000>,
+              <0x068a0000 0x10000>;
+        reg-names = "hypervisor", "mac", "xpcs";
+        interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "common";
+        clocks = <&bpmp TEGRA234_CLK_MGBE0_APP>,
+                 <&bpmp TEGRA234_CLK_MGBE0_MAC>,
+                 <&bpmp TEGRA234_CLK_MGBE0_MAC_DIVIDER>,
+                 <&bpmp TEGRA234_CLK_MGBE0_PTP_REF>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT_M>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT>,
+                 <&bpmp TEGRA234_CLK_MGBE0_TX>,
+                 <&bpmp TEGRA234_CLK_MGBE0_EEE_PCS>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_INPUT>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>,
+                 <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>;
+        clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+                      "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
+                      "rx-pcs", "tx-pcs";
+        resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>,
+                 <&bpmp TEGRA234_RESET_MGBE0_PCS>;
+        reset-names = "mac", "pcs";
+        interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEARD &emc>,
+                        <&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
+        power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>;
+
+        phy-handle = <&mgbe0_phy>;
+        phy-mode = "usxgmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mgbe0_phy: phy@0 {
+                compatible = "ethernet-phy-ieee802.3-c45";
+                reg = <0x0>;
+
+                #phy-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
new file mode 100644
index 000000000000..4c155441acbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8 DWMAC glue layer
+
+maintainers:
+  - Joakim Zhang <qiangqing.zhang@nxp.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - nxp,imx8mp-dwmac-eqos
+          - nxp,imx8dxl-dwmac-eqos
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nxp,imx8mp-dwmac-eqos
+              - nxp,imx8dxl-dwmac-eqos
+          - const: snps,dwmac-5.10a
+
+  clocks:
+    minItems: 3
+    items:
+      - description: MAC host clock
+      - description: MAC apb clock
+      - description: MAC timer clock
+      - description: MAC RGMII TX clock
+      - description: EQOS MEM clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+    contains:
+      enum:
+        - stmmaceth
+        - pclk
+        - ptp_ref
+        - tx
+        - mem
+
+  intf_mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the GPR syscon
+          - description: the offset of the GPR register
+    description:
+      Should be phandle/offset pair. The phandle to the syscon node which
+      encompases the GPR register, and the offset of the GPR register.
+
+  snps,rmii_refclk_ext:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      To select RMII reference clock from external.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    eqos: ethernet@30bf0000 {
+            compatible = "nxp,imx8mp-dwmac-eqos","snps,dwmac-5.10a";
+            reg = <0x30bf0000 0x10000>;
+            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "macirq", "eth_wake_irq";
+            clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
+                     <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
+                     <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+                     <&clk IMX8MP_CLK_ENET_QOS>;
+            clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
+            phy-mode = "rgmii";
+            status = "disabled";
+    };
diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
new file mode 100644
index 000000000000..ab8867e6939b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,tja11xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP TJA11xx PHY
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+description:
+  Bindings for NXP TJA11xx automotive PHYs
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]+$":
+    type: object
+    description: |
+      Some packages have multiple PHYs. Secondary PHY should be defines as
+      subnode of the first (parent) PHY.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 31
+        description:
+          The ID number for the child PHY. Should be +1 of parent PHY.
+
+      nxp,rmii-refclk-in:
+        type: boolean
+        description: |
+          The REF_CLK is provided for both transmitted and received data
+          in RMII mode. This clock signal is provided by the PHY and is
+          typically derived from an external 25MHz crystal. Alternatively,
+          a 50MHz clock signal generated by an external oscillator can be
+          connected to pin REF_CLK. A third option is to connect a 25MHz
+          clock to pin CLK_IN_OUT. So, the REF_CLK should be configured
+          as input or output according to the actual circuit connection.
+          If present, indicates that the REF_CLK will be configured as
+          interface reference clock input when RMII mode enabled.
+          If not present, the REF_CLK will be configured as interface
+          reference clock output when RMII mode enabled.
+          Only supported on TJA1100 and TJA1101.
+
+    required:
+      - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tja1101_phy0: ethernet-phy@4 {
+            reg = <0x4>;
+            nxp,rmii-refclk-in;
+        };
+    };
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tja1102_phy0: ethernet-phy@4 {
+            reg = <0x4>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            tja1102_phy1: ethernet-phy@5 {
+                reg = <0x5>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
index d7117a22fd87..27db496f1ce8 100644
--- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
@@ -9,6 +9,9 @@ Required properties on all platforms:
 - compatible:	For the OX820 SoC, it should be :
 		- "oxsemi,ox820-dwmac" to select glue
 		- "snps,dwmac-3.512" to select IP version.
+		For the OX810SE SoC, it should be :
+		- "oxsemi,ox810se-dwmac" to select glue
+		- "snps,dwmac-3.512" to select IP version.
 
 - clocks: Should contain phandles to the following clocks
 - clock-names:	Should contain the following:
diff --git a/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
new file mode 100644
index 000000000000..2d33bbab7163
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/renesas,rzn1-miic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 MII converter
+
+maintainers:
+  - Clément Léger <clement.leger@bootlin.com>
+
+description: |
+  This MII converter is present on the Renesas RZ/N1 SoC family. It is
+  responsible to do MII passthrough or convert it to RMII/RGMII.
+
+properties:
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-miic
+      - const: renesas,rzn1-miic
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: MII reference clock
+      - description: RGMII reference clock
+      - description: RMII reference clock
+      - description: AHB clock used for the MII converter register interface
+
+  clock-names:
+    items:
+      - const: mii_ref
+      - const: rgmii_ref
+      - const: rmii_ref
+      - const: hclk
+
+  renesas,miic-switch-portin:
+    description: MII Switch PORTIN configuration. This value should use one of
+      the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^mii-conv@[0-5]$":
+    type: object
+    description: MII converter port
+
+    properties:
+      reg:
+        description: MII Converter port number.
+        enum: [1, 2, 3, 4, 5]
+
+      renesas,miic-input:
+        description: Converter input port configuration. This value should use
+          one of the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - reg
+      - renesas,miic-input
+
+    additionalProperties: false
+
+    allOf:
+      - if:
+          properties:
+            reg:
+              const: 1
+        then:
+          properties:
+            renesas,miic-input:
+              const: 0
+      - if:
+          properties:
+            reg:
+              const: 2
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [1, 11]
+      - if:
+          properties:
+            reg:
+              const: 3
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [7, 10]
+      - if:
+          properties:
+            reg:
+              const: 4
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [4, 6, 9, 13]
+      - if:
+          properties:
+            reg:
+              const: 5
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [3, 5, 8, 12]
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/net/pcs-rzn1-miic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    eth-miic@44030000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
+      reg = <0x44030000 0x10000>;
+      clocks = <&sysctrl R9A06G032_CLK_MII_REF>,
+              <&sysctrl R9A06G032_CLK_RGMII_REF>,
+              <&sysctrl R9A06G032_CLK_RMII_REF>,
+              <&sysctrl R9A06G032_HCLK_SWITCH_RG>;
+      clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk";
+      renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
+      power-domains = <&sysctrl>;
+
+      mii_conv1: mii-conv@1 {
+        renesas,miic-input = <MIIC_GMAC1_PORT>;
+        reg = <1>;
+      };
+
+      mii_conv2: mii-conv@2 {
+        renesas,miic-input = <MIIC_SWITCH_PORTD>;
+        reg = <2>;
+      };
+
+      mii_conv3: mii-conv@3 {
+        renesas,miic-input = <MIIC_SWITCH_PORTC>;
+        reg = <3>;
+      };
+
+      mii_conv4: mii-conv@4 {
+        renesas,miic-input = <MIIC_SWITCH_PORTB>;
+        reg = <4>;
+      };
+
+      mii_conv5: mii-conv@5 {
+        renesas,miic-input = <MIIC_SWITCH_PORTA>;
+        reg = <5>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml
new file mode 100644
index 000000000000..c6b1c188abf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pse-pd/podl-pse-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator based Power Sourcing Equipment
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: Regulator based PoDL PSE controller. The device must be referenced
+  by the PHY node to control power injection to the Ethernet cable.
+
+allOf:
+  - $ref: "pse-controller.yaml#"
+
+properties:
+  compatible:
+    const: podl-pse-regulator
+
+  '#pse-cells':
+    const: 0
+
+  pse-supply:
+    description: Power supply for the PSE controller
+
+additionalProperties: false
+
+required:
+  - compatible
+  - pse-supply
+
+examples:
+  - |
+    ethernet-pse {
+      compatible = "podl-pse-regulator";
+      pse-supply = <&reg_t1l1>;
+      #pse-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
new file mode 100644
index 000000000000..b110abb42597
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pse-pd/pse-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Power Sourcing Equipment (PSE).
+
+description: Binding for the Power Sourcing Equipment (PSE) as defined in the
+  IEEE 802.3 specification. It is designed for hardware which is delivering
+  power over twisted pair/ethernet cable. The ethernet-pse nodes should be
+  used to describe PSE controller and referenced by the ethernet-phy node.
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+  $nodename:
+    pattern: "^ethernet-pse(@.*)?$"
+
+  "#pse-cells":
+    description:
+      Used to uniquely identify a PSE instance within an IC. Will be
+      0 on PSE nodes with only a single output and at least 1 on nodes
+      controlling several outputs.
+    enum: [0, 1]
+
+required:
+  - "#pse-cells"
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.txt b/Documentation/devicetree/bindings/net/qca,ar71xx.txt
deleted file mode 100644
index 2a33e71ba72b..000000000000
--- a/Documentation/devicetree/bindings/net/qca,ar71xx.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Required properties:
-- compatible:	Should be "qca,<soc>-eth". Currently support compatibles are:
-		qca,ar7100-eth - Atheros AR7100
-		qca,ar7240-eth - Atheros AR7240
-		qca,ar7241-eth - Atheros AR7241
-		qca,ar7242-eth - Atheros AR7242
-		qca,ar9130-eth - Atheros AR9130
-		qca,ar9330-eth - Atheros AR9330
-		qca,ar9340-eth - Atheros AR9340
-		qca,qca9530-eth - Qualcomm Atheros QCA9530
-		qca,qca9550-eth - Qualcomm Atheros QCA9550
-		qca,qca9560-eth - Qualcomm Atheros QCA9560
-
-- reg : Address and length of the register set for the device
-- interrupts : Should contain eth interrupt
-- phy-mode : See ethernet.txt file in the same directory
-- clocks: the clock used by the core
-- clock-names: the names of the clock listed in the clocks property. These are
-	"eth" and "mdio".
-- resets: Should contain phandles to the reset signals
-- reset-names: Should contain the names of reset signal listed in the resets
-		property. These are "mac" and "mdio"
-
-Optional properties:
-- phy-handle : phandle to the PHY device connected to this device.
-- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
-  Use instead of phy-handle.
-
-Optional subnodes:
-- mdio : specifies the mdio bus, used as a container for phy nodes
-  according to phy.txt in the same directory
-
-Example:
-
-ethernet@1a000000 {
-	compatible = "qca,ar9330-eth";
-	reg = <0x1a000000 0x200>;
-	interrupts = <5>;
-	resets = <&rst 13>, <&rst 23>;
-	reset-names = "mac", "mdio";
-	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_MDIO>;
-	clock-names = "eth", "mdio";
-
-	phy-mode = "gmii";
-};
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
new file mode 100644
index 000000000000..1ebf9e8c8a1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qca,ar71xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCA AR71XX MAC
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qca,ar7100-eth   # Atheros AR7100
+              - qca,ar7240-eth   # Atheros AR7240
+              - qca,ar7241-eth   # Atheros AR7241
+              - qca,ar7242-eth   # Atheros AR7242
+              - qca,ar9130-eth   # Atheros AR9130
+              - qca,ar9330-eth   # Atheros AR9330
+              - qca,ar9340-eth   # Atheros AR9340
+              - qca,qca9530-eth  # Qualcomm Atheros QCA9530
+              - qca,qca9550-eth  # Qualcomm Atheros QCA9550
+              - qca,qca9560-eth  # Qualcomm Atheros QCA9560
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: MAC main clock
+      - description: MDIO clock
+
+  clock-names:
+    items:
+      - const: eth
+      - const: mdio
+
+  resets:
+    items:
+      - description: MAC reset
+      - description: MDIO reset
+
+  reset-names:
+    items:
+      - const: mac
+      - const: mdio
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy-mode
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  # Lager board
+  - |
+    eth0: ethernet@19000000 {
+        compatible = "qca,ar9330-eth";
+        reg = <0x19000000 0x200>;
+        interrupts = <4>;
+        resets = <&rst 9>, <&rst 22>;
+        reset-names = "mac", "mdio";
+        clocks = <&pll 1>, <&pll 2>;
+        clock-names = "eth", "mdio";
+        phy-mode = "mii";
+        phy-handle = <&phy_port4>;
+    };
+
+    eth1: ethernet@1a000000 {
+        compatible = "qca,ar9330-eth";
+        reg = <0x1a000000 0x200>;
+        interrupts = <5>;
+        resets = <&rst 13>, <&rst 23>;
+        reset-names = "mac", "mdio";
+        clocks = <&pll 1>, <&pll 2>;
+        clock-names = "eth", "mdio";
+
+        phy-mode = "gmii";
+
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            switch10: switch@10 {
+                compatible = "qca,ar9331-switch";
+                reg = <0x10>;
+                resets = <&rst 8>;
+                reset-names = "switch";
+
+                interrupt-parent = <&miscintc>;
+                interrupts = <12>;
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    switch_port0: port@0 {
+                        reg = <0x0>;
+                        label = "cpu";
+                        ethernet = <&eth1>;
+
+                        phy-mode = "gmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                        };
+                    };
+
+                    switch_port1: port@1 {
+                        reg = <0x1>;
+                        phy-handle = <&phy_port0>;
+                        phy-mode = "internal";
+                    };
+
+                    switch_port2: port@2 {
+                        reg = <0x2>;
+                        phy-handle = <&phy_port1>;
+                        phy-mode = "internal";
+                    };
+
+                    switch_port3: port@3 {
+                        reg = <0x3>;
+                        phy-handle = <&phy_port2>;
+                        phy-mode = "internal";
+                    };
+
+                    switch_port4: port@4 {
+                        reg = <0x4>;
+                        phy-handle = <&phy_port3>;
+                        phy-mode = "internal";
+                    };
+                };
+
+                mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    interrupt-parent = <&switch10>;
+
+                    phy_port0: ethernet-phy@0 {
+                        reg = <0x0>;
+                        interrupts = <0>;
+                    };
+
+                    phy_port1: ethernet-phy@1 {
+                        reg = <0x1>;
+                        interrupts = <0>;
+                    };
+
+                    phy_port2: ethernet-phy@2 {
+                        reg = <0x2>;
+                        interrupts = <0>;
+                    };
+
+                    phy_port3: ethernet-phy@3 {
+                        reg = <0x3>;
+                        interrupts = <0>;
+                    };
+
+                    phy_port4: ethernet-phy@4 {
+                        reg = <0x4>;
+                        interrupts = <0>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
index 5a6c9d20c0ba..161d28919316 100644
--- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
@@ -20,15 +20,17 @@ allOf:
 properties:
   qca,clk-out-frequency:
     description: Clock output frequency in Hertz.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 25000000, 50000000, 62500000, 125000000 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [25000000, 50000000, 62500000, 125000000]
 
   qca,clk-out-strength:
     description: Clock output driver strength.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1, 2 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  qca,disable-smarteee:
+    description: Disable Atheros SmartEEE feature.
+    type: boolean
 
   qca,keep-pll-enabled:
     description: |
@@ -38,6 +40,26 @@ properties:
       Only supported on the AR8031.
     type: boolean
 
+  qca,disable-hibernation-mode:
+    description: |
+      Disable Atheros AR803X PHYs hibernation mode. If present, indicates
+      that the hardware of PHY will not enter power saving mode when the
+      cable is disconnected. And the RX_CLK always keeps outputting a
+      valid clock.
+    type: boolean
+
+  qca,smarteee-tw-us-100m:
+    description: EEE Tw parameter for 100M links.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 255
+
+  qca,smarteee-tw-us-1g:
+    description: EEE Tw parameter for gigabit links.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 255
+
   vddio-supply:
     description: |
       RGMII I/O voltage regulator (see regulator/regulator.yaml).
@@ -52,17 +74,16 @@ properties:
     type: object
     description:
       Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V.
-    allOf:
-      - $ref: /schemas/regulator/regulator.yaml
+    $ref: /schemas/regulator/regulator.yaml
 
   vddh-regulator:
     type: object
     description:
       Dummy subnode to model the external connection of the PHY VDDH
       regulator to VDDIO.
-    allOf:
-      - $ref: /schemas/regulator/regulator.yaml
+    $ref: /schemas/regulator/regulator.yaml
 
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt
index 21c36e524993..8f5ae0b84eec 100644
--- a/Documentation/devicetree/bindings/net/qca,qca7000.txt
+++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt
@@ -68,7 +68,7 @@ Required properties:
 Optional properties:
 - local-mac-address : see ./ethernet.txt
 - current-speed     : current baud rate of QCA7000 which defaults to 115200
-		      if absent, see also ../serial/slave-device.txt
+		      if absent, see also ../serial/serial.yaml
 
 UART Example:
 
diff --git a/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml b/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml
new file mode 100644
index 000000000000..b30544410d09
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,bam-dmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm BAM Data Multiplexer
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  The BAM Data Multiplexer provides access to the network data channels
+  of modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916
+  or MSM8974. It is built using a simple protocol layer on top of a DMA engine
+  (Qualcomm BAM DMA) and bidirectional interrupts to coordinate power control.
+
+  Note that this schema does not directly describe a hardware block but rather
+  a firmware convention that combines several other hardware blocks (such as the
+  DMA engine). As such it is specific to a firmware version, not a particular
+  SoC or hardware version.
+
+properties:
+  compatible:
+    const: qcom,bam-dmux
+
+  interrupts:
+    description:
+      Interrupts used by the modem to signal the AP.
+      Both interrupts must be declared as IRQ_TYPE_EDGE_BOTH.
+    items:
+      - description: Power control
+      - description: Power control acknowledgment
+
+  interrupt-names:
+    items:
+      - const: pc
+      - const: pc-ack
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: State bits used by the AP to signal the modem.
+    items:
+      - description: Power control
+      - description: Power control acknowledgment
+
+  qcom,smem-state-names:
+    description: Names for the state bits used by the AP to signal the modem.
+    items:
+      - const: pc
+      - const: pc-ack
+
+  dmas:
+    items:
+      - description: TX DMA channel phandle
+      - description: RX DMA channel phandle
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mpss: remoteproc {
+        bam-dmux {
+            compatible = "qcom,bam-dmux";
+
+            interrupt-parent = <&modem_smsm>;
+            interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+            interrupt-names = "pc", "pc-ack";
+
+            qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+            qcom,smem-state-names = "pc", "pc-ack";
+
+            dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+            dma-names = "tx", "rx";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.txt b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
index fcf5035810b5..1f5746849a71 100644
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.txt
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
@@ -7,7 +7,9 @@ This device has following properties:
 
 Required properties:
 
-- compatible: Should be qcom,qcs404-ethqos"
+- compatible: Should be one of:
+		"qcom,qcs404-ethqos"
+		"qcom,sm8150-ethqos"
 
 - reg: Address and length of the register set for the device
 
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
new file mode 100644
index 000000000000..dd4bb2e74880
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ipa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IP Accelerator (IPA)
+
+maintainers:
+  - Alex Elder <elder@kernel.org>
+
+description:
+  This binding describes the Qualcomm IPA.  The IPA is capable of offloading
+  certain network processing tasks (e.g. filtering, routing, and NAT) from
+  the main processor.
+
+  The IPA sits between multiple independent "execution environments,"
+  including the Application Processor (AP) and the modem.  The IPA presents
+  a Generic Software Interface (GSI) to each execution environment.
+  The GSI is an integral part of the IPA, but it is logically isolated
+  and has a distinct interrupt and a separately-defined address space.
+
+  See also soc/qcom/qcom,smp2p.txt and interconnect/interconnect.txt.  See
+  iommu/iommu.txt and iommu/arm,smmu.yaml for more information about SMMU
+  bindings.
+
+
+  - |
+    --------             ---------
+    |      |             |       |
+    |  AP  +<---.   .----+ Modem |
+    |      +--. |   | .->+       |
+    |      |  | |   | |  |       |
+    --------  | |   | |  ---------
+              v |   v |
+            --+-+---+-+--
+            |    GSI    |
+            |-----------|
+            |           |
+            |    IPA    |
+            |           |
+            -------------
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8998-ipa
+      - qcom,sc7180-ipa
+      - qcom,sc7280-ipa
+      - qcom,sdm845-ipa
+      - qcom,sdx55-ipa
+      - qcom,sm8350-ipa
+
+  reg:
+    items:
+      - description: IPA registers
+      - description: IPA shared memory
+      - description: GSI registers
+
+  reg-names:
+    items:
+      - const: ipa-reg
+      - const: ipa-shared
+      - const: gsi
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: core
+
+  interrupts:
+    items:
+      - description: IPA interrupt (hardware IRQ)
+      - description: GSI interrupt (hardware IRQ)
+      - description: Modem clock query interrupt (smp2p interrupt)
+      - description: Modem setup ready interrupt (smp2p interrupt)
+
+  interrupt-names:
+    items:
+      - const: ipa
+      - const: gsi
+      - const: ipa-clock-query
+      - const: ipa-setup-ready
+
+  interconnects:
+    oneOf:
+      - items:
+          - description: Path leading to system memory
+          - description: Path between the AP and IPA config space
+      - items:
+          - description: Path leading to system memory
+          - description: Path leading to internal memory
+          - description: Path between the AP and IPA config space
+
+  interconnect-names:
+    oneOf:
+      - items:
+          - const: memory
+          - const: config
+      - items:
+          - const: memory
+          - const: imem
+          - const: config
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the AOSS side-channel message RAM
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: State bits used in by the AP to signal the modem.
+    items:
+      - description: Whether the "ipa-clock-enabled" state bit is valid
+      - description: Whether the IPA clock is enabled (if valid)
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: ipa-clock-enabled-valid
+      - const: ipa-clock-enabled
+
+  modem-init:
+    type: boolean
+    description:
+      If present, it indicates that the modem is responsible for
+      performing early IPA initialization, including loading and
+      validating firwmare used by the GSI.
+
+  memory-region:
+    maxItems: 1
+    description:
+      If present, a phandle for a reserved memory area that holds
+      the firmware passed to Trust Zone for authentication.  Required
+      when Trust Zone (not the modem) performs early initialization.
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      If present, name (or relative path) of the file within the
+      firmware search path containing the firmware image used when
+      initializing IPA hardware.  Optional, and only used when
+      Trust Zone performs early initialization.
+
+required:
+  - compatible
+  - iommus
+  - reg
+  - clocks
+  - interrupts
+  - interconnects
+  - qcom,smem-states
+
+# Either modem-init is present, or memory-region must be present.
+oneOf:
+  - required:
+      - modem-init
+  - required:
+      - memory-region
+
+# If memory-region is present, firmware-name may optionally be present.
+# But if modem-init is present, firmware-name must not be present.
+if:
+  required:
+    - modem-init
+then:
+  not:
+    required:
+      - firmware-name
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/clock/qcom,rpmh.h>
+        #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+        smp2p-mpss {
+                compatible = "qcom,smp2p";
+                interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+                mboxes = <&apss_shared 6>;
+                qcom,smem = <94>, <432>;
+                qcom,local-pid = <0>;
+                qcom,remote-pid = <5>;
+
+                ipa_smp2p_out: ipa-ap-to-modem {
+                        qcom,entry-name = "ipa";
+                        #qcom,smem-state-cells = <1>;
+                };
+
+                ipa_smp2p_in: ipa-modem-to-ap {
+                        qcom,entry-name = "ipa";
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+        };
+
+        ipa@1e40000 {
+                compatible = "qcom,sdm845-ipa";
+
+                modem-init;
+
+                iommus = <&apps_smmu 0x720 0x3>;
+                reg = <0x1e40000 0x7000>,
+                        <0x1e47000 0x2000>,
+                        <0x1e04000 0x2c000>;
+                reg-names = "ipa-reg",
+                            "ipa-shared",
+                            "gsi";
+
+                interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+                                      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+                                      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                                      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+                interrupt-names = "ipa",
+                                  "gsi",
+                                  "ipa-clock-query",
+                                  "ipa-setup-ready";
+
+                clocks = <&rpmhcc RPMH_IPA_CLK>;
+                clock-names = "core";
+
+                interconnects =
+                        <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_EBI1>,
+                        <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_IMEM>,
+                        <&rsc_hlos MASTER_APPSS_PROC &rsc_hlos SLAVE_IPA_CFG>;
+                interconnect-names = "memory",
+                                     "imem",
+                                     "config";
+
+                qcom,qmp = <&aoss_qmp>;
+
+                qcom,smem-states = <&ipa_smp2p_out 0>,
+                                   <&ipa_smp2p_out 1>;
+                qcom,smem-state-names = "ipa-clock-enabled-valid",
+                                        "ipa-clock-enabled";
+        };
diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
new file mode 100644
index 000000000000..ad8b2b41c140
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ipq4019-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ40xx MDIO Controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq4019-mdio
+      - qcom,ipq5018-mdio
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description:
+      the first Address and length of the register set for the MDIO controller.
+      the second Address and length of the register for ethernet LDO, this second
+      address range is only required by the platform IPQ50xx.
+
+  clocks:
+    maxItems: 1
+    description: |
+      MDIO clock source frequency fixed to 100MHZ, this clock should be specified
+      by the platform IPQ807x, IPQ60xx and IPQ50xx.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@90000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "qcom,ipq4019-mdio";
+      reg = <0x90000 0x64>;
+
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+
+      ethphy1: ethernet-phy@1 {
+        reg = <1>;
+      };
+
+      ethphy2: ethernet-phy@2 {
+        reg = <2>;
+      };
+
+      ethphy3: ethernet-phy@3 {
+        reg = <3>;
+      };
+
+      ethphy4: ethernet-phy@4 {
+        reg = <4>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
new file mode 100644
index 000000000000..d7748dd33199
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ipq8064-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ipq806x MDIO bus controller
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description:
+  The ipq806x soc have a MDIO dedicated controller that is
+  used to communicate with the gmac phy connected.
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    const: qcom,ipq8064-mdio
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    mdio0: mdio@37000000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        compatible = "qcom,ipq8064-mdio";
+        reg = <0x37000000 0x200000>;
+
+        clocks = <&gcc GMAC_CORE1_CLK>;
+
+        switch@10 {
+            compatible = "qca,qca8337";
+            reg = <0x10>;
+
+            ports {
+              /* ... */
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/qcom-emac.txt b/Documentation/devicetree/bindings/net/qcom-emac.txt
index 346e6c7f47b7..7ae8aa148634 100644
--- a/Documentation/devicetree/bindings/net/qcom-emac.txt
+++ b/Documentation/devicetree/bindings/net/qcom-emac.txt
@@ -14,7 +14,7 @@ MAC node:
 - mac-address : The 6-byte MAC address. If present, it is the default
 	MAC address.
 - internal-phy : phandle to the internal PHY node
-- phy-handle : phandle the the external PHY node
+- phy-handle : phandle to the external PHY node
 
 Internal PHY node:
 - compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii".
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
deleted file mode 100644
index 999aceadb985..000000000000
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Qualcomm Bluetooth Chips
----------------------
-
-This documents the binding structure and common properties for serial
-attached Qualcomm devices.
-
-Serial attached Qualcomm devices shall be a child node of the host UART
-device the slave device is attached to.
-
-Required properties:
- - compatible: should contain one of the following:
-   * "qcom,qca6174-bt"
-   * "qcom,wcn3990-bt"
-   * "qcom,wcn3991-bt"
-   * "qcom,wcn3998-bt"
-
-Optional properties for compatible string qcom,qca6174-bt:
-
- - enable-gpios: gpio specifier used to enable chip
- - clocks: clock provided to the controller (SUSCLK_32KHZ)
- - firmware-name: specify the name of nvm firmware to load
-
-Required properties for compatible string qcom,wcn399x-bt:
-
- - vddio-supply: VDD_IO supply regulator handle.
- - vddxo-supply: VDD_XO supply regulator handle.
- - vddrf-supply: VDD_RF supply regulator handle.
- - vddch0-supply: VDD_CH0 supply regulator handle.
-
-Optional properties for compatible string qcom,wcn399x-bt:
-
- - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
- - firmware-name: specify the name of nvm firmware to load
-
-Examples:
-
-serial@7570000 {
-	label = "BT-UART";
-	status = "okay";
-
-	bluetooth {
-		compatible = "qcom,qca6174-bt";
-
-		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
-		clocks = <&divclk4>;
-		firmware-name = "nvm_00440302.bin";
-	};
-};
-
-serial@898000 {
-	bluetooth {
-		compatible = "qcom,wcn3990-bt";
-
-		vddio-supply = <&vreg_s4a_1p8>;
-		vddxo-supply = <&vreg_l7a_1p8>;
-		vddrf-supply = <&vreg_l17a_1p3>;
-		vddch0-supply = <&vreg_l25a_3p3>;
-		max-speed = <3200000>;
-		firmware-name = "crnv21.bin";
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
new file mode 100644
index 000000000000..f93c6e7a1b59
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Bluetooth Chips
+
+maintainers:
+  - Balakrishna Godavarthi <bgodavar@codeaurora.org>
+  - Rocky Liao <rjliao@codeaurora.org>
+
+description:
+  This binding describes Qualcomm UART-attached bluetooth chips.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qca6174-bt
+      - qcom,qca9377-bt
+      - qcom,wcn3990-bt
+      - qcom,wcn3991-bt
+      - qcom,wcn3998-bt
+      - qcom,qca6390-bt
+      - qcom,wcn6750-bt
+
+  enable-gpios:
+    maxItems: 1
+    description: gpio specifier used to enable chip
+
+  swctrl-gpios:
+    maxItems: 1
+    description: gpio specifier is used to find status
+                 of clock supply to SoC
+
+  clocks:
+    maxItems: 1
+    description: clock provided to the controller (SUSCLK_32KHZ)
+
+  vddio-supply:
+    description: VDD_IO supply regulator handle
+
+  vddxo-supply:
+    description: VDD_XO supply regulator handle
+
+  vddrf-supply:
+    description: VDD_RF supply regulator handle
+
+  vddch0-supply:
+    description: VDD_CH0 supply regulator handle
+
+  vddaon-supply:
+    description: VDD_AON supply regulator handle
+
+  vddbtcxmx-supply:
+    description: VDD_BT_CXMX supply regulator handle
+
+  vddrfacmn-supply:
+    description: VDD_RFA_CMN supply regulator handle
+
+  vddrfa0p8-supply:
+    description: VDD_RFA_0P8 suppply regulator handle
+
+  vddrfa1p7-supply:
+    description: VDD_RFA_1P7 supply regulator handle
+
+  vddrfa1p2-supply:
+    description: VDD_RFA_1P2 supply regulator handle
+
+  vddrfa2p2-supply:
+    description: VDD_RFA_2P2 supply regulator handle
+
+  vddasd-supply:
+    description: VDD_ASD supply regulator handle
+
+  max-speed:
+    description: see Documentation/devicetree/bindings/serial/serial.yaml
+
+  firmware-name:
+    description: specify the name of nvm firmware to load
+
+  local-bd-address:
+    description: see Documentation/devicetree/bindings/net/bluetooth.txt
+
+
+required:
+  - compatible
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qca6174-bt
+    then:
+      required:
+        - enable-gpios
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn3990-bt
+              - qcom,wcn3991-bt
+              - qcom,wcn3998-bt
+    then:
+      required:
+        - vddio-supply
+        - vddxo-supply
+        - vddrf-supply
+        - vddch0-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn6750-bt
+    then:
+      required:
+        - enable-gpios
+        - swctrl-gpios
+        - vddio-supply
+        - vddaon-supply
+        - vddbtcxmx-supply
+        - vddrfacmn-supply
+        - vddrfa0p8-supply
+        - vddrfa1p7-supply
+        - vddrfa1p2-supply
+        - vddasd-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+
+        bluetooth {
+            compatible = "qcom,qca6174-bt";
+            enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+            clocks = <&divclk4>;
+            firmware-name = "nvm_00440302.bin";
+        };
+    };
+  - |
+    serial {
+
+        bluetooth {
+            compatible = "qcom,wcn3990-bt";
+            vddio-supply = <&vreg_s4a_1p8>;
+            vddxo-supply = <&vreg_l7a_1p8>;
+            vddrf-supply = <&vreg_l17a_1p3>;
+            vddch0-supply = <&vreg_l25a_3p3>;
+            max-speed = <3200000>;
+            firmware-name = "crnv21.bin";
+        };
+    };
+  - |
+    serial {
+
+        bluetooth {
+            compatible = "qcom,wcn6750-bt";
+            pinctrl-names = "default";
+            pinctrl-0 = <&bt_en_default>;
+            enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+            swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+            vddio-supply = <&vreg_l19b_1p8>;
+            vddaon-supply = <&vreg_s7b_0p9>;
+            vddbtcxmx-supply = <&vreg_s7b_0p9>;
+            vddrfacmn-supply = <&vreg_s7b_0p9>;
+            vddrfa0p8-supply = <&vreg_s7b_0p9>;
+            vddrfa1p7-supply = <&vreg_s1b_1p8>;
+            vddrfa1p2-supply = <&vreg_s8b_1p2>;
+            vddrfa2p2-supply = <&vreg_s1c_2p2>;
+            vddasd-supply = <&vreg_l11c_2p8>;
+            max-speed = <3200000>;
+            firmware-name = "msnv11.bin";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
deleted file mode 100644
index 9fe1a0a22e44..000000000000
--- a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Ralink Frame Engine Ethernet controller
-=======================================
-
-The Ralink frame engine ethernet controller can be found on Ralink and
-Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8).
-
-Depending on the SoC, there is a number of ports connected to the CPU port
-directly and/or via a (gigabit-)switch.
-
-* Ethernet controller node
-
-Required properties:
-- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth",
-  "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
-  "mediatek,mt7620-eth", "mediatek,mt7621-eth"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the frame engines interrupt
-- resets: Should contain the frame engines resets
-- reset-names: Should contain the reset names "fe". If a switch is present
-  "esw" is also required.
-
-
-* Ethernet port node
-
-Required properties:
-- compatible: Should be "ralink,eth-port"
-- reg: The number of the physical port
-- phy-handle: reference to the node describing the phy
-
-Example:
-
-mdio-bus {
-	...
-	phy0: ethernet-phy@0 {
-		phy-mode = "mii";
-		reg = <0>;
-	};
-};
-
-ethernet@400000 {
-	compatible = "ralink,rt2880-eth";
-	reg = <0x00400000 10000>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	resets = <&rstctrl 18>;
-	reset-names = "fe";
-
-	interrupt-parent = <&cpuintc>;
-	interrupts = <5>;
-
-	port@0 {
-		compatible = "ralink,eth-port";
-		reg = <0>;
-		phy-handle = <&phy0>;
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
deleted file mode 100644
index 87e315856efa..000000000000
--- a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Ralink Fast Ethernet Embedded Switch
-====================================
-
-The ralink fast ethernet embedded switch can be found on Ralink and Mediatek
-SoCs (RT3x5x, RT5350, MT76x8).
-
-Required properties:
-- compatible: Should be "ralink,rt3050-esw"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the embedded switches interrupt
-- resets: Should contain the embedded switches resets
-- reset-names: Should contain the reset names "esw"
-
-Optional properties:
-- ralink,portmap: can be used to choose if the default switch setup is
-  llllw or wllll
-- ralink,led_polarity: override the active high/low settings of the leds
-
-Example:
-
-esw@10110000 {
-	compatible = "ralink,rt3050-esw";
-	reg = <0x10110000 8000>;
-
-	resets = <&rstctrl 23>;
-	reset-names = "esw";
-
-	interrupt-parent = <&intc>;
-	interrupts = <17>;
-};
diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
new file mode 100644
index 000000000000..bb94a2388520
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL82xx PHY
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+description:
+  Bindings for Realtek RTL82xx PHYs
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  realtek,clkout-disable:
+    type: boolean
+    description:
+      Disable CLKOUT clock, CLKOUT clock default is enabled after hardware reset.
+
+
+  realtek,aldps-enable:
+    type: boolean
+    description:
+      Enable ALDPS mode, ALDPS mode default is disabled after hardware reset.
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethphy1: ethernet-phy@1 {
+                reg = <1>;
+                realtek,clkout-disable;
+                realtek,aldps-enable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
new file mode 100644
index 000000000000..e329ef06e10f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/realtek-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTL8723BS/RTL8723CS/RTL8822CS Bluetooth
+
+maintainers:
+  - Vasily Khoruzhick <anarsoul@gmail.com>
+  - Alistair Francis <alistair@alistair23.me>
+
+description:
+  RTL8723CS/RTL8723CS/RTL8822CS is WiFi + BT chip. WiFi part is connected over
+  SDIO, while BT is connected over serial. It speaks H5 protocol with few
+  extra commands to upload firmware and change module speed.
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtl8723bs-bt
+      - realtek,rtl8723cs-bt
+      - realtek,rtl8822cs-bt
+
+  device-wake-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to wakeup the BT module
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to enable the BT module
+
+  host-wake-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to wakeup the host processor
+
+  max-speed: true
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    uart1 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+        uart-has-rtscts;
+
+        bluetooth {
+            compatible = "realtek,rtl8723bs-bt";
+            device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+            host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml
index 7f84df9790e2..06b38c9bc6ec 100644
--- a/Documentation/devicetree/bindings/net/renesas,ether.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml
@@ -10,7 +10,7 @@ allOf:
   - $ref: ethernet-controller.yaml#
 
 maintainers:
-  - Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
 
 properties:
   compatible:
@@ -29,8 +29,9 @@ properties:
               - renesas,rcar-gen1-ether  # a generic R-Car Gen1 device
       - items:
           - enum:
-              - renesas,ether-r8a7745    # device is a part of R8A7745 SoC
+              - renesas,ether-r8a7742    # device is a part of R8A7742 SoC
               - renesas,ether-r8a7743    # device is a part of R8A7743 SoC
+              - renesas,ether-r8a7745    # device is a part of R8A7745 SoC
               - renesas,ether-r8a7790    # device is a part of R8A7790 SoC
               - renesas,ether-r8a7791    # device is a part of R8A7791 SoC
               - renesas,ether-r8a7793    # device is a part of R8A7793 SoC
@@ -40,8 +41,8 @@ properties:
 
   reg:
     items:
-       - description: E-DMAC/feLic registers
-       - description: TSU registers
+      - description: E-DMAC/feLic registers
+      - description: TSU registers
     minItems: 1
 
   interrupts:
@@ -58,9 +59,15 @@ properties:
   clocks:
     maxItems: 1
 
-  pinctrl-0: true
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phy-mode: true
 
-  pinctrl-names: true
+  phy-handle: true
 
   renesas,no-ether-link:
     type: boolean
@@ -73,6 +80,11 @@ properties:
       specify when the Ether LINK signal is active-low instead of normal
       active-high
 
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+
 required:
   - compatible
   - reg
@@ -82,33 +94,37 @@ required:
   - '#address-cells'
   - '#size-cells'
   - clocks
-  - pinctrl-0
+
+additionalProperties: false
 
 examples:
   # Lager board
   - |
-    #include <dt-bindings/clock/r8a7790-clock.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+    #include <dt-bindings/gpio/gpio.h>
 
     ethernet@ee700000 {
         compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether";
-        reg = <0 0xee700000 0 0x400>;
-        interrupt-parent = <&gic>;
-        interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+        reg = <0xee700000 0x400>;
+        interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 813>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 813>;
         phy-mode = "rmii";
         phy-handle = <&phy1>;
-        pinctrl-0 = <&ether_pins>;
-        pinctrl-names = "default";
         renesas,ether-link-active-low;
         #address-cells = <1>;
         #size-cells = <0>;
 
         phy1: ethernet-phy@1 {
+            compatible = "ethernet-phy-id0022.1537",
+                         "ethernet-phy-ieee802.3-c22";
             reg = <1>;
             interrupt-parent = <&irqc0>;
             interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-            pinctrl-0 = <&phy1_pins>;
-            pinctrl-names = "default";
+            micrel,led-mode = <1>;
+            reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
         };
     };
diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
new file mode 100644
index 000000000000..3f41294f5997
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
@@ -0,0 +1,357 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,etheravb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet AVB
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,etheravb-r8a7742      # RZ/G1H
+              - renesas,etheravb-r8a7743      # RZ/G1M
+              - renesas,etheravb-r8a7744      # RZ/G1N
+              - renesas,etheravb-r8a7745      # RZ/G1E
+              - renesas,etheravb-r8a77470     # RZ/G1C
+              - renesas,etheravb-r8a7790      # R-Car H2
+              - renesas,etheravb-r8a7791      # R-Car M2-W
+              - renesas,etheravb-r8a7792      # R-Car V2H
+              - renesas,etheravb-r8a7793      # R-Car M2-N
+              - renesas,etheravb-r8a7794      # R-Car E2
+          - const: renesas,etheravb-rcar-gen2 # R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,etheravb-r8a774a1     # RZ/G2M
+              - renesas,etheravb-r8a774b1     # RZ/G2N
+              - renesas,etheravb-r8a774c0     # RZ/G2E
+              - renesas,etheravb-r8a774e1     # RZ/G2H
+              - renesas,etheravb-r8a7795      # R-Car H3
+              - renesas,etheravb-r8a7796      # R-Car M3-W
+              - renesas,etheravb-r8a77961     # R-Car M3-W+
+              - renesas,etheravb-r8a77965     # R-Car M3-N
+              - renesas,etheravb-r8a77970     # R-Car V3M
+              - renesas,etheravb-r8a77980     # R-Car V3H
+              - renesas,etheravb-r8a77990     # R-Car E3
+              - renesas,etheravb-r8a77995     # R-Car D3
+          - const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2
+
+      - items:
+          - enum:
+              - renesas,etheravb-r8a779a0     # R-Car V3U
+              - renesas,etheravb-r8a779g0     # R-Car V4H
+          - const: renesas,etheravb-rcar-gen4 # R-Car Gen4
+
+      - items:
+          - enum:
+              - renesas,etheravb-r9a09g011 # RZ/V2M
+          - const: renesas,etheravb-rzv2m  # RZ/V2M compatible
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-gbeth # RZ/G2UL
+              - renesas,r9a07g044-gbeth # RZ/G2{L,LC}
+              - renesas,r9a07g054-gbeth # RZ/V2L
+          - const: renesas,rzg2l-gbeth  # RZ/{G2L,G2UL,V2L} family
+
+  reg: true
+
+  interrupts: true
+
+  interrupt-names: true
+
+  clocks: true
+
+  clock-names: true
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phy-mode: true
+
+  phy-handle: true
+
+  '#address-cells':
+    description: Number of address cells for the MDIO bus.
+    const: 1
+
+  '#size-cells':
+    description: Number of size cells on the MDIO bus.
+    const: 0
+
+  renesas,no-ether-link:
+    type: boolean
+    description:
+      Specify when a board does not provide a proper AVB_LINK signal.
+
+  renesas,ether-link-active-low:
+    type: boolean
+    description:
+      Specify when the AVB_LINK signal is active-low instead of normal
+      active-high.
+
+  rx-internal-delay-ps:
+    enum: [0, 1800]
+
+  tx-internal-delay-ps:
+    enum: [0, 2000]
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+  - phy-mode
+  - phy-handle
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,etheravb-rcar-gen2
+              - renesas,etheravb-r8a7795
+              - renesas,etheravb-r8a7796
+              - renesas,etheravb-r8a77961
+              - renesas,etheravb-r8a77965
+    then:
+      properties:
+        reg:
+          items:
+            - description: MAC register block
+            - description: Stream buffer
+    else:
+      properties:
+        reg:
+          items:
+            - description: MAC register block
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,etheravb-rcar-gen2
+              - renesas,rzg2l-gbeth
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 3
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: mux
+            - const: fil
+            - const: arp_ns
+        rx-internal-delay-ps: false
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              const: renesas,etheravb-rzv2m
+      then:
+        properties:
+          interrupts:
+            minItems: 29
+            maxItems: 29
+          interrupt-names:
+            items:
+              pattern: '^(ch(1?)[0-9])|ch20|ch21|dia|dib|err_a|err_b|mgmt_a|mgmt_b|line3$'
+          rx-internal-delay-ps: false
+        required:
+          - interrupt-names
+      else:
+        properties:
+          interrupts:
+            minItems: 25
+            maxItems: 25
+          interrupt-names:
+            items:
+              pattern: '^ch[0-9]+$'
+        required:
+          - interrupt-names
+          - rx-internal-delay-ps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,etheravb-r8a774a1
+              - renesas,etheravb-r8a774b1
+              - renesas,etheravb-r8a774e1
+              - renesas,etheravb-r8a7795
+              - renesas,etheravb-r8a7796
+              - renesas,etheravb-r8a77961
+              - renesas,etheravb-r8a77965
+              - renesas,etheravb-r8a77970
+              - renesas,etheravb-r8a77980
+              - renesas,etheravb-rcar-gen4
+    then:
+      required:
+        - tx-internal-delay-ps
+    else:
+      properties:
+        tx-internal-delay-ps: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,etheravb-r8a77995
+    then:
+      properties:
+        rx-internal-delay-ps:
+          const: 1800
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,etheravb-r8a77980
+    then:
+      properties:
+        tx-internal-delay-ps:
+          const: 2000
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rzg2l-gbeth
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Main clock
+            - description: Register access clock
+            - description: Reference clock for RGMII
+        clock-names:
+          items:
+            - const: axi
+            - const: chi
+            - const: refclk
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              const: renesas,etheravb-rzv2m
+      then:
+        properties:
+          clocks:
+            items:
+              - description: Main clock
+              - description: Coherent Hub Interface clock
+              - description: gPTP reference clock
+          clock-names:
+            items:
+              - const: axi
+              - const: chi
+              - const: gptp
+      else:
+        properties:
+          clocks:
+            minItems: 1
+            items:
+              - description: AVB functional clock
+              - description: Optional TXC reference clock
+          clock-names:
+            minItems: 1
+            items:
+              - const: fck
+              - const: refclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    aliases {
+            ethernet0 = &avb;
+    };
+
+    avb: ethernet@e6800000 {
+            compatible = "renesas,etheravb-r8a7795",
+                         "renesas,etheravb-rcar-gen3";
+            reg = <0xe6800000 0x800>, <0xe6a00000 0x10000>;
+            interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6",
+                              "ch7", "ch8", "ch9", "ch10", "ch11", "ch12",
+                              "ch13", "ch14", "ch15", "ch16", "ch17", "ch18",
+                              "ch19", "ch20", "ch21", "ch22", "ch23", "ch24";
+            clocks = <&cpg CPG_MOD 812>;
+            clock-names = "fck";
+            iommus = <&ipmmu_ds0 16>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 812>;
+            phy-mode = "rgmii";
+            phy-handle = <&phy0>;
+            rx-internal-delay-ps = <0>;
+            tx-internal-delay-ps = <2000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy0: ethernet-phy@0 {
+                    compatible = "ethernet-phy-id0022.1622",
+                                 "ethernet-phy-ieee802.3-c22";
+                    rxc-skew-ps = <1500>;
+                    reg = <0>;
+                    interrupt-parent = <&gpio2>;
+                    interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+                    reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
deleted file mode 100644
index 87dad2dd8ca0..000000000000
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ /dev/null
@@ -1,133 +0,0 @@
-* Renesas Electronics Ethernet AVB
-
-This file provides information on what the device node for the Ethernet AVB
-interface contains.
-
-Required properties:
-- compatible: Must contain one or more of the following:
-      - "renesas,etheravb-r8a7743" for the R8A7743 SoC.
-      - "renesas,etheravb-r8a7744" for the R8A7744 SoC.
-      - "renesas,etheravb-r8a7745" for the R8A7745 SoC.
-      - "renesas,etheravb-r8a77470" for the R8A77470 SoC.
-      - "renesas,etheravb-r8a7790" for the R8A7790 SoC.
-      - "renesas,etheravb-r8a7791" for the R8A7791 SoC.
-      - "renesas,etheravb-r8a7792" for the R8A7792 SoC.
-      - "renesas,etheravb-r8a7793" for the R8A7793 SoC.
-      - "renesas,etheravb-r8a7794" for the R8A7794 SoC.
-      - "renesas,etheravb-rcar-gen2" as a fallback for the above
-		R-Car Gen2 and RZ/G1 devices.
-
-      - "renesas,etheravb-r8a774a1" for the R8A774A1 SoC.
-      - "renesas,etheravb-r8a774b1" for the R8A774B1 SoC.
-      - "renesas,etheravb-r8a774c0" for the R8A774C0 SoC.
-      - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
-      - "renesas,etheravb-r8a7796" for the R8A77960 SoC.
-      - "renesas,etheravb-r8a77961" for the R8A77961 SoC.
-      - "renesas,etheravb-r8a77965" for the R8A77965 SoC.
-      - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
-      - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
-      - "renesas,etheravb-r8a77990" for the R8A77990 SoC.
-      - "renesas,etheravb-r8a77995" for the R8A77995 SoC.
-      - "renesas,etheravb-rcar-gen3" as a fallback for the above
-		R-Car Gen3 and RZ/G2 devices.
-
-	When compatible with the generic version, nodes must list the
-	SoC-specific version corresponding to the platform first followed by
-	the generic version.
-
-- reg: Offset and length of (1) the register block and (2) the stream buffer.
-       The region for the register block is mandatory.
-       The region for the stream buffer is optional, as it is only present on
-       R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A77960),
-       M3-W+ (R8A77961), and M3-N (R8A77965).
-- interrupts: A list of interrupt-specifiers, one for each entry in
-	      interrupt-names.
-	      If interrupt-names is not present, an interrupt specifier
-	      for a single muxed interrupt.
-- phy-mode: see ethernet.txt file in the same directory.
-- phy-handle: see ethernet.txt file in the same directory.
-- #address-cells: number of address cells for the MDIO bus, must be equal to 1.
-- #size-cells: number of size cells on the MDIO bus, must be equal to 0.
-- clocks: clock phandle and specifier pair.
-- pinctrl-0: phandle, referring to a default pin configuration node.
-
-Optional properties:
-- interrupt-names: A list of interrupt names.
-		   For the R-Car Gen 3 SoCs this property is mandatory;
-		   it should include one entry per channel, named "ch%u",
-		   where %u is the channel number ranging from 0 to 24.
-		   For other SoCs this property is optional; if present
-		   it should contain "mux" for a single muxed interrupt.
-- pinctrl-names: pin configuration state name ("default").
-- renesas,no-ether-link: boolean, specify when a board does not provide a proper
-			 AVB_LINK signal.
-- renesas,ether-link-active-low: boolean, specify when the AVB_LINK signal is
-				 active-low instead of normal active-high.
-
-Example:
-
-	ethernet@e6800000 {
-		compatible = "renesas,etheravb-r8a7795", "renesas,etheravb-rcar-gen3";
-		reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "ch0", "ch1", "ch2", "ch3",
-				  "ch4", "ch5", "ch6", "ch7",
-				  "ch8", "ch9", "ch10", "ch11",
-				  "ch12", "ch13", "ch14", "ch15",
-				  "ch16", "ch17", "ch18", "ch19",
-				  "ch20", "ch21", "ch22", "ch23",
-				  "ch24";
-		clocks = <&cpg CPG_MOD 812>;
-		power-domains = <&cpg>;
-		phy-mode = "rgmii-id";
-		phy-handle = <&phy0>;
-
-		pinctrl-0 = <&ether_pins>;
-		pinctrl-names = "default";
-		renesas,no-ether-link;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			rxc-skew-ps = <900>;
-			rxdv-skew-ps = <0>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txc-skew-ps = <900>;
-			txen-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-			reg = <0>;
-			interrupt-parent = <&gpio2>;
-			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/rockchip,emac.yaml b/Documentation/devicetree/bindings/net/rockchip,emac.yaml
new file mode 100644
index 000000000000..a6d4f14df442
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rockchip,emac.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/rockchip,emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3036/RK3066/RK3188 Ethernet Media Access Controller (EMAC)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-emac
+      - rockchip,rk3066-emac
+      - rockchip,rk3188-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: host clock
+      - description: reference clock
+      - description: mac TX/RX clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hclk
+      - const: macref
+      - const: macclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon GRF used to control speed and mode for the EMAC.
+
+  phy-supply:
+    description:
+      Phandle to a regulator if the PHY needs one.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - rockchip,grf
+  - phy
+  - phy-mode
+  - mdio
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3036-emac
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+
+        clock-names:
+          minItems: 3
+
+    else:
+      properties:
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@10204000 {
+      compatible = "rockchip,rk3188-emac";
+      reg = <0xc0fc2000 0x3c>;
+      interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
+      clock-names = "hclk", "macref";
+      rockchip,grf = <&grf>;
+      pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+      pinctrl-names = "default";
+      phy = <&phy0>;
+      phy-mode = "rmii";
+      phy-supply = <&vcc_rmii>;
+
+      mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy0: ethernet-phy@0 {
+          reg = <1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
deleted file mode 100644
index 3b71da7e8742..000000000000
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-Rockchip SoC RK3288 10/100/1000 Ethernet driver(GMAC)
-
-The device node has following properties.
-
-Required properties:
- - compatible: should be "rockchip,<name>-gamc"
-   "rockchip,px30-gmac":   found on PX30 SoCs
-   "rockchip,rk3128-gmac": found on RK312x SoCs
-   "rockchip,rk3228-gmac": found on RK322x SoCs
-   "rockchip,rk3288-gmac": found on RK3288 SoCs
-   "rockchip,rk3328-gmac": found on RK3328 SoCs
-   "rockchip,rk3366-gmac": found on RK3366 SoCs
-   "rockchip,rk3368-gmac": found on RK3368 SoCs
-   "rockchip,rk3399-gmac": found on RK3399 SoCs
-   "rockchip,rv1108-gmac": found on RV1108 SoCs
- - reg: addresses and length of the register sets for the device.
- - interrupts: Should contain the GMAC interrupts.
- - interrupt-names: Should contain the interrupt names "macirq".
- - rockchip,grf: phandle to the syscon grf used to control speed and mode.
- - clocks: <&cru SCLK_MAC>: clock selector for main clock, from PLL or PHY.
-	   <&cru SCLK_MAC_PLL>: PLL clock for SCLK_MAC
-	   <&cru SCLK_MAC_RX>: clock gate for RX
-	   <&cru SCLK_MAC_TX>: clock gate for TX
-	   <&cru SCLK_MACREF>: clock gate for RMII referce clock
-	   <&cru SCLK_MACREF_OUT> clock gate for RMII reference clock output
-	   <&cru ACLK_GMAC>: AXI clock gate for GMAC
-	   <&cru PCLK_GMAC>: APB clock gate for GMAC
- - clock-names: One name for each entry in the clocks property.
- - phy-mode: See ethernet.txt file in the same directory.
- - pinctrl-names: Names corresponding to the numbered pinctrl states.
- - pinctrl-0: pin-control mode. can be <&rgmii_pins> or <&rmii_pins>.
- - clock_in_out: For RGMII, it must be "input", means main clock(125MHz)
-   is not sourced from SoC's PLL, but input from PHY; For RMII, "input" means
-   PHY provides the reference clock(50MHz), "output" means GMAC provides the
-   reference clock.
- - snps,reset-gpio       gpio number for phy reset.
- - snps,reset-active-low boolean flag to indicate if phy reset is active low.
- - assigned-clocks: main clock, should be <&cru SCLK_MAC>;
- - assigned-clock-parents = parent of main clock.
-   can be <&ext_gmac> or <&cru SCLK_MAC_PLL>.
-
-Optional properties:
- - tx_delay: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
- - rx_delay: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default.
- - phy-supply: phandle to a regulator if the PHY needs one
-
-Example:
-
-gmac: ethernet@ff290000 {
-	compatible = "rockchip,rk3288-gmac";
-	reg = <0xff290000 0x10000>;
-	interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "macirq";
-	rockchip,grf = <&grf>;
-	clocks = <&cru SCLK_MAC>,
-		<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
-		<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
-		<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
-	clock-names = "stmmaceth",
-		"mac_clk_rx", "mac_clk_tx",
-		"clk_mac_ref", "clk_mac_refout",
-		"aclk_mac", "pclk_mac";
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins /*&rmii_pins*/>;
-
-	clock_in_out = "input";
-	snps,reset-gpio = <&gpio4 7 0>;
-	snps,reset-active-low;
-
-	assigned-clocks = <&cru SCLK_MAC>;
-	assigned-clock-parents = <&ext_gmac>;
-	tx_delay = <0x30>;
-	rx_delay = <0x10>;
-
-};
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
new file mode 100644
index 000000000000..42fb72b6909d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/rockchip-dwmac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Rockchip 10/100/1000 Ethernet driver(GMAC)
+
+maintainers:
+  - David Wu <david.wu@rock-chips.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,px30-gmac
+          - rockchip,rk3128-gmac
+          - rockchip,rk3228-gmac
+          - rockchip,rk3288-gmac
+          - rockchip,rk3308-gmac
+          - rockchip,rk3328-gmac
+          - rockchip,rk3366-gmac
+          - rockchip,rk3368-gmac
+          - rockchip,rk3399-gmac
+          - rockchip,rk3568-gmac
+          - rockchip,rk3588-gmac
+          - rockchip,rv1108-gmac
+          - rockchip,rv1126-gmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - rockchip,px30-gmac
+              - rockchip,rk3128-gmac
+              - rockchip,rk3228-gmac
+              - rockchip,rk3288-gmac
+              - rockchip,rk3308-gmac
+              - rockchip,rk3328-gmac
+              - rockchip,rk3366-gmac
+              - rockchip,rk3368-gmac
+              - rockchip,rk3399-gmac
+              - rockchip,rv1108-gmac
+              - rockchip,rv1126-gmac
+      - items:
+          - enum:
+              - rockchip,rk3568-gmac
+              - rockchip,rk3588-gmac
+          - const: snps,dwmac-4.20a
+
+  clocks:
+    minItems: 5
+    maxItems: 8
+
+  clock-names:
+    contains:
+      enum:
+        - stmmaceth
+        - mac_clk_tx
+        - mac_clk_rx
+        - aclk_mac
+        - pclk_mac
+        - clk_mac_ref
+        - clk_mac_refout
+        - clk_mac_speed
+
+  clock_in_out:
+    description:
+      For RGMII, it must be "input", means main clock(125MHz)
+      is not sourced from SoC's PLL, but input from PHY.
+      For RMII, "input" means PHY provides the reference clock(50MHz),
+      "output" means GMAC provides the reference clock.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [input, output]
+
+  rockchip,grf:
+    description: The phandle of the syscon node for the general register file.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  rockchip,php-grf:
+    description:
+      The phandle of the syscon node for the peripheral general register file.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  tx_delay:
+    description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  rx_delay:
+    description: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  phy-supply:
+    description: PHY regulator
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3288-cru.h>
+
+    gmac: ethernet@ff290000 {
+        compatible = "rockchip,rk3288-gmac";
+        reg = <0xff290000 0x10000>;
+        interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq";
+        clocks = <&cru SCLK_MAC>,
+                 <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+                 <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+                 <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+        clock-names = "stmmaceth",
+                      "mac_clk_rx", "mac_clk_tx",
+                      "clk_mac_ref", "clk_mac_refout",
+                      "aclk_mac", "pclk_mac";
+        assigned-clocks = <&cru SCLK_MAC>;
+        assigned-clock-parents = <&ext_gmac>;
+
+        rockchip,grf = <&grf>;
+        phy-mode = "rgmii";
+        clock_in_out = "input";
+        tx_delay = <0x30>;
+        rx_delay = <0x10>;
+    };
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.txt b/Documentation/devicetree/bindings/net/sff,sfp.txt
deleted file mode 100644
index 832139919f20..000000000000
--- a/Documentation/devicetree/bindings/net/sff,sfp.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP)
-Transceiver
-
-Required properties:
-
-- compatible : must be one of
-  "sff,sfp" for SFP modules
-  "sff,sff" for soldered down SFF modules
-
-- i2c-bus : phandle of an I2C bus controller for the SFP two wire serial
-  interface
-
-Optional Properties:
-
-- mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS)
-  module presence input gpio signal, active (module absent) high. Must
-  not be present for SFF modules
-
-- los-gpios : GPIO phandle and a specifier of the Receiver Loss of Signal
-  Indication input gpio signal, active (signal lost) high
-
-- tx-fault-gpios : GPIO phandle and a specifier of the Module Transmitter
-  Fault input gpio signal, active (fault condition) high
-
-- tx-disable-gpios : GPIO phandle and a specifier of the Transmitter Disable
-  output gpio signal, active (Tx disable) high
-
-- rate-select0-gpios : GPIO phandle and a specifier of the Rx Signaling Rate
-  Select (AKA RS0) output gpio signal, low: low Rx rate, high: high Rx rate
-  Must not be present for SFF modules
-
-- rate-select1-gpios : GPIO phandle and a specifier of the Tx Signaling Rate
-  Select (AKA RS1) output gpio signal (SFP+ only), low: low Tx rate, high:
-  high Tx rate. Must not be present for SFF modules
-
-- maximum-power-milliwatt : Maximum module power consumption
-  Specifies the maximum power consumption allowable by a module in the
-  slot, in milli-Watts.  Presently, modules can be up to 1W, 1.5W or 2W.
-
-Example #1: Direct serdes to SFP connection
-
-sfp_eth3: sfp-eth3 {
-	compatible = "sff,sfp";
-	i2c-bus = <&sfp_1g_i2c>;
-	los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>;
-	mod-def0-gpios = <&cpm_gpio2 21 GPIO_ACTIVE_LOW>;
-	maximum-power-milliwatt = <1000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&cpm_sfp_1g_pins &cps_sfp_1g_pins>;
-	tx-disable-gpios = <&cps_gpio1 24 GPIO_ACTIVE_HIGH>;
-	tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>;
-};
-
-&cps_emac3 {
-	phy-names = "comphy";
-	phys = <&cps_comphy5 0>;
-	sfp = <&sfp_eth3>;
-};
-
-Example #2: Serdes to PHY to SFP connection
-
-sfp_eth0: sfp-eth0 {
-	compatible = "sff,sfp";
-	i2c-bus = <&sfpp0_i2c>;
-	los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>;
-	mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&cps_sfpp0_pins>;
-	tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
-	tx-fault-gpios  = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
-};
-
-p0_phy: ethernet-phy@0 {
-	compatible = "ethernet-phy-ieee802.3-c45";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>;
-	reg = <0>;
-	interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>;
-	sfp = <&sfp_eth0>;
-};
-
-&cpm_eth0 {
-	phy = <&p0_phy>;
-	phy-mode = "10gbase-kr";
-};
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml
new file mode 100644
index 000000000000..06c66ab81c01
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/sff,sfp.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP)
+  Transceiver
+
+maintainers:
+  - Russell King <linux@armlinux.org.uk>
+
+properties:
+  compatible:
+    enum:
+      - sff,sfp  # for SFP modules
+      - sff,sff  # for soldered down SFF modules
+
+  i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of an I2C bus controller for the SFP two wire serial
+
+  maximum-power-milliwatt:
+    maxItems: 1
+    description:
+      Maximum module power consumption Specifies the maximum power consumption
+      allowable by a module in the slot, in milli-Watts. Presently, modules can
+      be up to 1W, 1.5W or 2W.
+
+  "mod-def0-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module
+      presence input gpio signal, active (module absent) high. Must not be
+      present for SFF modules
+
+  "los-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Receiver Loss of Signal Indication
+      input gpio signal, active (signal lost) high
+
+  "tx-fault-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Module Transmitter Fault input gpio
+      signal, active (fault condition) high
+
+  "tx-disable-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Transmitter Disable output gpio
+      signal, active (Tx disable) high
+
+  "rate-select0-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0)
+      output gpio signal, low - low Rx rate, high - high Rx rate Must not be
+      present for SFF modules
+
+  "rate-select1-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1)
+      output gpio signal (SFP+ only), low - low Tx rate, high - high Tx rate. Must
+      not be present for SFF modules
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sff,sff
+    then:
+      properties:
+        mod-def0-gpios: false
+        rate-select0-gpios: false
+        rate-select1-gpios: false
+
+required:
+  - compatible
+  - i2c-bus
+
+additionalProperties: false
+
+examples:
+  - | # Direct serdes to SFP connection
+    #include <dt-bindings/gpio/gpio.h>
+
+    sfp1: sfp {
+      compatible = "sff,sfp";
+      i2c-bus = <&sfp_1g_i2c>;
+      los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>;
+      mod-def0-gpios = <&cpm_gpio2 21 GPIO_ACTIVE_LOW>;
+      maximum-power-milliwatt = <1000>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&cpm_sfp_1g_pins &cps_sfp_1g_pins>;
+      tx-disable-gpios = <&cps_gpio1 24 GPIO_ACTIVE_HIGH>;
+      tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>;
+    };
+
+    ethernet {
+      phy-names = "comphy";
+      phys = <&cps_comphy5 0>;
+      sfp = <&sfp1>;
+    };
+
+  - | # Serdes to PHY to SFP connection
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sfp2: sfp {
+      compatible = "sff,sfp";
+      i2c-bus = <&sfp_i2c>;
+      los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>;
+      mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&cps_sfpp0_pins>;
+      tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
+      tx-fault-gpios  = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
+    };
+
+    mdio {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      phy: ethernet-phy@0 {
+        compatible = "ethernet-phy-ieee802.3-c45";
+        pinctrl-names = "default";
+        pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>;
+        reg = <0>;
+        interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>;
+        sfp = <&sfp2>;
+      };
+    };
+
+    ethernet {
+      phy = <&phy>;
+      phy-mode = "10gbase-kr";
+    };
diff --git a/Documentation/devicetree/bindings/net/smsc,lan9115.yaml b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml
new file mode 100644
index 000000000000..f86667cbcca8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/smsc,lan9115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: smsc,lan9115
+      - items:
+          - enum:
+              - smsc,lan89218
+              - smsc,lan9117
+              - smsc,lan9118
+              - smsc,lan9220
+              - smsc,lan9221
+          - const: smsc,lan9115
+
+  reg:
+    maxItems: 1
+
+  reg-shift: true
+
+  reg-io-width:
+    enum: [ 2, 4 ]
+    default: 2
+
+  interrupts:
+    minItems: 1
+    items:
+      - description:
+          LAN interrupt line
+      - description:
+          Optional PME (power management event) interrupt that is able to wake
+          up the host system with a 50ms pulse on network activity
+
+  clocks:
+    maxItems: 1
+
+  phy-mode: true
+
+  smsc,irq-active-high:
+    type: boolean
+    description: Indicates the IRQ polarity is active-high
+
+  smsc,irq-push-pull:
+    type: boolean
+    description: Indicates the IRQ type is push-pull
+
+  smsc,force-internal-phy:
+    type: boolean
+    description: Forces SMSC LAN controller to use internal PHY
+
+  smsc,force-external-phy:
+    type: boolean
+    description: Forces SMSC LAN controller to use external PHY
+
+  smsc,save-mac-address:
+    type: boolean
+    description:
+      Indicates that MAC address needs to be saved before resetting the
+      controller
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      A GPIO line connected to the RESET (active low) signal of the device.
+      On many systems this is wired high so the device goes out of reset at
+      power-on, but if it is under program control, this optional GPIO can
+      wake up in response to it.
+
+  vdd33a-supply:
+    description: 3.3V analog power supply
+
+  vddvario-supply:
+    description: IO logic power supply
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+# There are lots of bus-specific properties ("qcom,*", "samsung,*", "fsl,*",
+# "gpmc,*", ...) to be found, that actually depend on the compatible value of
+# the parent node.
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    ethernet@f4000000 {
+            compatible = "smsc,lan9220", "smsc,lan9115";
+            reg = <0xf4000000 0x2000000>;
+            phy-mode = "mii";
+            interrupt-parent = <&gpio1>;
+            interrupts = <31>, <32>;
+            reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+            reg-io-width = <4>;
+            smsc,irq-push-pull;
+    };
diff --git a/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml
new file mode 100644
index 000000000000..6df533162632
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/smsc,lan91c111.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Smart Mixed-Signal Connectivity (SMSC) LAN91C9x/91C1xx Controller
+
+maintainers:
+  - Nicolas Pitre <nico@fluxnic.net>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: smsc,lan91c111
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg-shift: true
+
+  reg-io-width:
+    enum: [ 1, 2, 4 ]
+    default: 4
+
+  reset-gpios:
+    description: GPIO connected to control RESET pin
+    maxItems: 1
+
+  power-gpios:
+    description: GPIO connect to control PWRDWN pin
+    maxItems: 1
+
+  pxa-u16-align4:
+    description: put in place the workaround the force all u16 writes to be
+      32 bits aligned
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@4010000 {
+          compatible = "smsc,lan91c111";
+          reg = <0x40100000 0x10000>;
+          phy-mode = "mii";
+          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+          reg-io-width = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
index 8b7c719b0bb9..a8d0dc9a8c0e 100644
--- a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
+++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
@@ -5,6 +5,10 @@ through an Ethernet OF device node.
 
 Optional properties:
 
+- clocks:
+  The clock used as phy reference clock and is connected to phy
+  pin XTAL1/CLKIN.
+
 - smsc,disable-energy-detect:
   If set, do not enable energy detect mode for the SMSC phy.
   default: enable energy detect mode
diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
deleted file mode 100644
index 309e37eb7c7c..000000000000
--- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-SMSC LAN91c111 Ethernet mac
-
-Required properties:
-- compatible = "smsc,lan91c111";
-- reg : physical address and size of registers
-- interrupts : interrupt connection
-
-Optional properties:
-- phy-device : see ethernet.txt file in the same directory
-- reg-io-width : Mask of sizes (in bytes) of the IO accesses that
-  are supported on the device.  Valid value for SMSC LAN91c111 are
-  1, 2 or 4.  If it's omitted or invalid, the size would be 2 meaning
-  16-bit access only.
-- power-gpios: GPIO to control the PWRDWN pin
-- reset-gpios: GPIO to control the RESET pin
-- pxa-u16-align4 : Boolean, put in place the workaround the force all
-		   u16 writes to be 32 bits aligned
diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt
deleted file mode 100644
index acfafc8e143c..000000000000
--- a/Documentation/devicetree/bindings/net/smsc911x.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
-
-Required properties:
-- compatible : Should be "smsc,lan<model>", "smsc,lan9115"
-- reg : Address and length of the io space for SMSC LAN
-- interrupts : one or two interrupt specifiers
-  - The first interrupt is the SMSC LAN interrupt line
-  - The second interrupt (if present) is the PME (power
-    management event) interrupt that is able to wake up the host
-     system with a 50ms pulse on network activity
-- phy-mode : See ethernet.txt file in the same directory
-
-Optional properties:
-- reg-shift : Specify the quantity to shift the register offsets by
-- reg-io-width : Specify the size (in bytes) of the IO accesses that
-  should be performed on the device.  Valid value for SMSC LAN is
-  2 or 4.  If it's omitted or invalid, the size would be 2.
-- smsc,irq-active-high : Indicates the IRQ polarity is active-high
-- smsc,irq-push-pull : Indicates the IRQ type is push-pull
-- smsc,force-internal-phy : Forces SMSC LAN controller to use
-  internal PHY
-- smsc,force-external-phy : Forces SMSC LAN controller to use
-  external PHY
-- smsc,save-mac-address : Indicates that mac address needs to be saved
-  before resetting the controller
-- reset-gpios : a GPIO line connected to the RESET (active low) signal
-  of the device. On many systems this is wired high so the device goes
-  out of reset at power-on, but if it is under program control, this
-  optional GPIO can wake up in response to it.
-- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies
-
-Examples:
-
-lan9220@f4000000 {
-	compatible = "smsc,lan9220", "smsc,lan9115";
-	reg = <0xf4000000 0x2000000>;
-	phy-mode = "mii";
-	interrupt-parent = <&gpio1>;
-	interrupts = <31>, <32>;
-	reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	reg-io-width = <4>;
-	smsc,irq-push-pull;
-};
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index e08cd4c4d568..13b984076af5 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/net/snps,dwmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Synopsys DesignWare MAC Device Tree Bindings
+title: Synopsys DesignWare MAC
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
   - Giuseppe Cavallaro <peppe.cavallaro@st.com>
   - Jose Abreu <joabreu@synopsys.com>
 
@@ -21,12 +21,15 @@ select:
       contains:
         enum:
           - snps,dwmac
+          - snps,dwmac-3.40a
           - snps,dwmac-3.50a
           - snps,dwmac-3.610
           - snps,dwmac-3.70a
           - snps,dwmac-3.710
           - snps,dwmac-4.00
           - snps,dwmac-4.10a
+          - snps,dwmac-4.20a
+          - snps,dwmac-5.10a
           - snps,dwxgmac
           - snps,dwxgmac-2.10
 
@@ -47,7 +50,7 @@ properties:
         - allwinner,sun7i-a20-gmac
         - allwinner,sun8i-a83t-emac
         - allwinner,sun8i-h3-emac
-        - allwinner,sun8i-r40-emac
+        - allwinner,sun8i-r40-gmac
         - allwinner,sun8i-v3s-emac
         - allwinner,sun50i-a64-emac
         - amlogic,meson6-dwmac
@@ -55,13 +58,35 @@ properties:
         - amlogic,meson8m2-dwmac
         - amlogic,meson-gxbb-dwmac
         - amlogic,meson-axg-dwmac
+        - ingenic,jz4775-mac
+        - ingenic,x1000-mac
+        - ingenic,x1600-mac
+        - ingenic,x1830-mac
+        - ingenic,x2000-mac
+        - loongson,ls2k-dwmac
+        - loongson,ls7a-dwmac
+        - renesas,r9a06g032-gmac
+        - renesas,rzn1-gmac
+        - rockchip,px30-gmac
+        - rockchip,rk3128-gmac
+        - rockchip,rk3228-gmac
+        - rockchip,rk3288-gmac
+        - rockchip,rk3328-gmac
+        - rockchip,rk3366-gmac
+        - rockchip,rk3368-gmac
+        - rockchip,rk3588-gmac
+        - rockchip,rk3399-gmac
+        - rockchip,rv1108-gmac
         - snps,dwmac
+        - snps,dwmac-3.40a
         - snps,dwmac-3.50a
         - snps,dwmac-3.610
         - snps,dwmac-3.70a
         - snps,dwmac-3.710
         - snps,dwmac-4.00
         - snps,dwmac-4.10a
+        - snps,dwmac-4.20a
+        - snps,dwmac-5.10a
         - snps,dwxgmac
         - snps,dwxgmac-2.10
 
@@ -71,7 +96,6 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 3
     items:
       - description: Combined signal for various interrupt events
       - description: The interrupt to manage the remote wake-up packet detection
@@ -79,7 +103,6 @@ properties:
 
   interrupt-names:
     minItems: 1
-    maxItems: 3
     items:
       - const: macirq
       - const: eth_wake_irq
@@ -87,7 +110,8 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 3
+    maxItems: 8
+    additionalItems: true
     items:
       - description: GMAC main clock
       - description: Peripheral registers interface clock
@@ -97,6 +121,8 @@ properties:
           clock will be used and this is fine on some platforms.
 
   clock-names:
+    minItems: 1
+    maxItems: 8
     additionalItems: true
     contains:
       enum:
@@ -112,6 +138,9 @@ properties:
   reset-names:
     const: stmmaceth
 
+  power-domains:
+    maxItems: 1
+
   mac-mode:
     $ref: ethernet-controller.yaml#/properties/phy-connection-type
     description:
@@ -121,7 +150,7 @@ properties:
       in a different mode than the PHY in order to function.
 
   snps,axi-config:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       AXI BUS Mode parameters. Phandle to a node that can contain the
       following properties
@@ -136,7 +165,7 @@ properties:
         * snps,rb, rebuild INCRx Burst
 
   snps,mtl-rx-config:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Multiple RX Queues parameters. Phandle to a node that can
       contain the following properties
@@ -156,10 +185,11 @@ properties:
             * snps,route-dcbcp, DCB Control Packets
             * snps,route-up, Untagged Packets
             * snps,route-multi-broad, Multicast & Broadcast Packets
-          * snps,priority, RX queue priority (Range 0x0 to 0xF)
+          * snps,priority, bitmask of the tagged frames priorities assigned to
+            the queue
 
   snps,mtl-tx-config:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Multiple TX Queues parameters. Phandle to a node that can
       contain the following properties
@@ -183,7 +213,10 @@ properties:
             * snps,idle_slope, unlock on WoL
             * snps,high_credit, max write outstanding req. limit
             * snps,low_credit, max read outstanding req. limit
-          * snps,priority, TX queue priority (Range 0x0 to 0xF)
+          * snps,priority, bitmask of the priorities assigned to the queue.
+            When a PFC frame is received with priorities matching the bitmask,
+            the queue is blocked from transmitting for the pause time specified
+            in the PFC frame.
 
   snps,reset-gpio:
     deprecated: true
@@ -193,73 +226,77 @@ properties:
 
   snps,reset-active-low:
     deprecated: true
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Indicates that the PHY Reset is active low
 
   snps,reset-delays-us:
     deprecated: true
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/uint32-array
-      - minItems: 3
-        maxItems: 3
     description:
       Triplet of delays. The 1st cell is reset pre-delay in micro
       seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
       cell is reset post-delay in micro seconds.
+    minItems: 3
+    maxItems: 3
 
   snps,aal:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Use Address-Aligned Beats
 
   snps,fixed-burst:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Program the DMA to use the fixed burst mode
 
   snps,mixed-burst:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Program the DMA to use the mixed burst mode
 
   snps,force_thresh_dma_mode:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Force DMA to use the threshold mode for both tx and rx
 
   snps,force_sf_dma_mode:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Force DMA to use the Store and Forward mode for both tx and
       rx. This flag is ignored if force_thresh_dma_mode is set.
 
   snps,en-tx-lpi-clockgating:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Enable gating of the MAC TX clock during TX low-power mode
 
   snps,multicast-filter-bins:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Number of multicast filter hash bins supported by this device
       instance
 
   snps,perfect-filter-entries:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Number of perfect filter entries supported by this device
       instance
 
   snps,ps-speed:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Port selection speed that can be passed to the core when PCS
       is supported. For example, this is used in case of SGMII and
       MAC2MAC connection.
 
+  snps,clk-csr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Frequency division factor for MDC clock.
+
   mdio:
-    type: object
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
     description:
       Creates and registers an MDIO bus.
 
@@ -270,6 +307,60 @@ properties:
     required:
       - compatible
 
+  stmmac-axi-config:
+    type: object
+    unevaluatedProperties: false
+    description:
+      AXI BUS Mode parameters.
+
+    properties:
+      snps,lpi_en:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          enable Low Power Interface
+
+      snps,xit_frm:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          unlock on WoL
+
+      snps,wr_osr_lmt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          max write outstanding req. limit
+
+      snps,rd_osr_lmt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          max read outstanding req. limit
+
+      snps,kbbe:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          do not cross 1KiB boundary.
+
+      snps,blen:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          this is a vector of supported burst length.
+        minItems: 7
+        maxItems: 7
+
+      snps,fb:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          fixed-burst
+
+      snps,mb:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          mixed-burst
+
+      snps,rb:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          rebuild INCRx Burst
+
 required:
   - compatible
   - reg
@@ -291,9 +382,17 @@ allOf:
               - allwinner,sun7i-a20-gmac
               - allwinner,sun8i-a83t-emac
               - allwinner,sun8i-h3-emac
-              - allwinner,sun8i-r40-emac
+              - allwinner,sun8i-r40-gmac
               - allwinner,sun8i-v3s-emac
               - allwinner,sun50i-a64-emac
+              - ingenic,jz4775-mac
+              - ingenic,x1000-mac
+              - ingenic,x1600-mac
+              - ingenic,x1830-mac
+              - ingenic,x2000-mac
+              - snps,dwmac-3.50a
+              - snps,dwmac-4.10a
+              - snps,dwmac-4.20a
               - snps,dwxgmac
               - snps,dwxgmac-2.10
               - st,spear600-gmac
@@ -301,30 +400,27 @@ allOf:
     then:
       properties:
         snps,pbl:
-          allOf:
-            - $ref: /schemas/types.yaml#definitions/uint32
-            - enum: [2, 4, 8]
           description:
             Programmable Burst Length (tx and rx)
+          $ref: /schemas/types.yaml#/definitions/uint32
+          enum: [1, 2, 4, 8, 16, 32]
 
         snps,txpbl:
-          allOf:
-            - $ref: /schemas/types.yaml#definitions/uint32
-            - enum: [2, 4, 8]
           description:
             Tx Programmable Burst Length. If set, DMA tx will use this
             value rather than snps,pbl.
+          $ref: /schemas/types.yaml#/definitions/uint32
+          enum: [1, 2, 4, 8, 16, 32]
 
         snps,rxpbl:
-          allOf:
-            - $ref: /schemas/types.yaml#definitions/uint32
-            - enum: [2, 4, 8]
           description:
             Rx Programmable Burst Length. If set, DMA rx will use this
             value rather than snps,pbl.
+          $ref: /schemas/types.yaml#/definitions/uint32
+          enum: [1, 2, 4, 8, 16, 32]
 
         snps,no-pbl-x8:
-          $ref: /schemas/types.yaml#definitions/flag
+          $ref: /schemas/types.yaml#/definitions/flag
           description:
             Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core
             rev < 3.50, don\'t multiply the values by 4.
@@ -337,11 +433,20 @@ allOf:
               - allwinner,sun7i-a20-gmac
               - allwinner,sun8i-a83t-emac
               - allwinner,sun8i-h3-emac
-              - allwinner,sun8i-r40-emac
+              - allwinner,sun8i-r40-gmac
               - allwinner,sun8i-v3s-emac
               - allwinner,sun50i-a64-emac
+              - loongson,ls2k-dwmac
+              - loongson,ls7a-dwmac
+              - ingenic,jz4775-mac
+              - ingenic,x1000-mac
+              - ingenic,x1600-mac
+              - ingenic,x1830-mac
+              - ingenic,x2000-mac
               - snps,dwmac-4.00
               - snps,dwmac-4.10a
+              - snps,dwmac-4.20a
+              - snps,dwmac-5.10a
               - snps,dwxgmac
               - snps,dwxgmac-2.10
               - st,spear600-gmac
@@ -349,11 +454,13 @@ allOf:
     then:
       properties:
         snps,tso:
-          $ref: /schemas/types.yaml#definitions/flag
+          $ref: /schemas/types.yaml#/definitions/flag
           description:
             Enables the TSO feature otherwise it will be managed by
             MAC HW capability register.
 
+additionalProperties: true
+
 examples:
   - |
     stmmac_axi_setup: stmmac-axi-config {
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
deleted file mode 100644
index 4e85fc495e87..000000000000
--- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Socionext AVE ethernet controller
-
-This describes the devicetree bindings for AVE ethernet controller
-implemented on Socionext UniPhier SoCs.
-
-Required properties:
- - compatible: Should be
-	- "socionext,uniphier-pro4-ave4" : for Pro4 SoC
-	- "socionext,uniphier-pxs2-ave4" : for PXs2 SoC
-	- "socionext,uniphier-ld11-ave4" : for LD11 SoC
-	- "socionext,uniphier-ld20-ave4" : for LD20 SoC
-	- "socionext,uniphier-pxs3-ave4" : for PXs3 SoC
- - reg: Address where registers are mapped and size of region.
- - interrupts: Should contain the MAC interrupt.
- - phy-mode: See ethernet.txt in the same directory. Allow to choose
-	"rgmii", "rmii", "mii", or "internal" according to the PHY.
-	The acceptable mode is SoC-dependent.
- - phy-handle: Should point to the external phy device.
-	See ethernet.txt file in the same directory.
- - clocks: A phandle to the clock for the MAC.
-	For Pro4 SoC, that is "socionext,uniphier-pro4-ave4",
-	another MAC clock, GIO bus clock and PHY clock are also required.
- - clock-names: Should contain
-	- "ether", "ether-gb", "gio", "ether-phy" for Pro4 SoC
-	- "ether" for others
- - resets: A phandle to the reset control for the MAC. For Pro4 SoC,
-	GIO bus reset is also required.
- - reset-names: Should contain
-	- "ether", "gio" for Pro4 SoC
-	- "ether" for others
- - socionext,syscon-phy-mode: A phandle to syscon with one argument
-	that configures phy mode. The argument is the ID of MAC instance.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Required subnode:
- - mdio: A container for child nodes representing phy nodes.
-         See phy.txt in the same directory.
-
-Example:
-
-	ether: ethernet@65000000 {
-		compatible = "socionext,uniphier-ld20-ave4";
-		reg = <0x65000000 0x8500>;
-		interrupts = <0 66 4>;
-		phy-mode = "rgmii";
-		phy-handle = <&ethphy>;
-		clock-names = "ether";
-		clocks = <&sys_clk 6>;
-		reset-names = "ether";
-		resets = <&sys_rst 6>;
-		socionext,syscon-phy-mode = <&soc_glue 0>;
-		local-mac-address = [00 00 00 00 00 00];
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ethphy: ethphy@1 {
-				reg = <1>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
new file mode 100644
index 000000000000..b0ebcef6801c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/socionext,uniphier-ave4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext AVE ethernet controller
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |
+  This describes the devicetree bindings for AVE ethernet controller
+  implemented on Socionext UniPhier SoCs.
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-ave4
+      - socionext,uniphier-pxs2-ave4
+      - socionext,uniphier-ld11-ave4
+      - socionext,uniphier-ld20-ave4
+      - socionext,uniphier-pxs3-ave4
+      - socionext,uniphier-nx1-ave4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phy-mode: true
+
+  phy-handle: true
+
+  mac-address: true
+
+  local-mac-address: true
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names: true
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names: true
+
+  socionext,syscon-phy-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon that configures phy mode
+          - description: ID of MAC instance
+    description:
+      A phandle to syscon with one argument that configures phy mode.
+      The argument is the ID of MAC instance.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro4-ave4
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: gio
+            - const: ether
+            - const: ether-gb
+            - const: ether-phy
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: ether
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: ether
+        resets:
+          maxItems: 1
+        reset-names:
+          const: ether
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy-mode
+  - phy-handle
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - mdio
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ether: ethernet@65000000 {
+        compatible = "socionext,uniphier-ld20-ave4";
+                reg = <0x65000000 0x8500>;
+                interrupts = <0 66 4>;
+                phy-mode = "rgmii";
+                phy-handle = <&ethphy>;
+                clock-names = "ether";
+                clocks = <&sys_clk 6>;
+                reset-names = "ether";
+                resets = <&sys_rst 6>;
+                socionext,syscon-phy-mode = <&soc_glue 0>;
+
+                mdio {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        ethphy: ethernet-phy@1 {
+                                reg = <1>;
+                        };
+                };
+        };
diff --git a/Documentation/devicetree/bindings/net/socionext-netsec.txt b/Documentation/devicetree/bindings/net/socionext-netsec.txt
index 9d6c9feb12ff..a3c1dffaa4bb 100644
--- a/Documentation/devicetree/bindings/net/socionext-netsec.txt
+++ b/Documentation/devicetree/bindings/net/socionext-netsec.txt
@@ -30,7 +30,9 @@ Optional properties: (See ethernet.txt file in the same directory)
 - max-frame-size: See ethernet.txt in the same directory.
 
 The MAC address will be determined using the optional properties
-defined in ethernet.txt.
+defined in ethernet.txt. The 'phy-mode' property is required, but may
+be set to the empty string if the PHY configuration is programmed by
+the firmware or set by hardware straps, and needs to be preserved.
 
 Example:
 	eth0: ethernet@522d0000 {
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
deleted file mode 100644
index a90eef11dc46..000000000000
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-STMicroelectronics STM32 / MCU DWMAC glue layer controller
-
-This file documents platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
-- compatible:  For MCU family should be "st,stm32-dwmac" to select glue, and
-	       "snps,dwmac-3.50a" to select IP version.
-	       For MPU family should be "st,stm32mp1-dwmac" to select
-	       glue, and "snps,dwmac-4.20a" to select IP version.
-- clocks: Must contain a phandle for each entry in clock-names.
-- clock-names: Should be "stmmaceth" for the host clock.
-	       Should be "mac-clk-tx" for the MAC TX clock.
-	       Should be "mac-clk-rx" for the MAC RX clock.
-	       For MPU family need to add also "ethstp" for power mode clock
-- interrupt-names: Should contain a list of interrupt names corresponding to
-           the interrupts in the interrupts property, if available.
-		   Should be "macirq" for the main MAC IRQ
-		   Should be "eth_wake_irq" for the IT which wake up system
-- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
-	       encompases the glue register, and the offset of the control register.
-
-Optional properties:
-- clock-names:     For MPU family "eth-ck" for PHY without quartz
-- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
-- st,eth-ref-clk-sel (boolean) :  set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK.
-
-Example:
-
-	ethernet@40028000 {
-		compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
-		reg = <0x40028000 0x8000>;
-		reg-names = "stmmaceth";
-		interrupts = <0 61 0>, <0 62 0>;
-		interrupt-names = "macirq", "eth_wake_irq";
-		clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
-		clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
-		st,syscon = <&syscfg 0x4>;
-		snps,pbl = <8>;
-		snps,mixed-burst;
-		dma-ranges;
-	};
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
new file mode 100644
index 000000000000..5c93167b3b41
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 / MCU DWMAC glue layer controller
+
+maintainers:
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Christophe Roullier <christophe.roullier@foss.st.com>
+
+description:
+  This file documents platform glue layer for stmmac.
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32-dwmac
+          - st,stm32mp1-dwmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - st,stm32mp1-dwmac
+          - const: snps,dwmac-4.20a
+      - items:
+          - enum:
+              - st,stm32-dwmac
+          - const: snps,dwmac-4.10a
+      - items:
+          - enum:
+              - st,stm32-dwmac
+          - const: snps,dwmac-3.50a
+
+  reg: true
+
+  reg-names:
+    items:
+      - const: stmmaceth
+
+  clocks:
+    minItems: 3
+    items:
+      - description: GMAC main clock
+      - description: MAC TX clock
+      - description: MAC RX clock
+      - description: For MPU family, used for power mode
+      - description: For MPU family, used for PHY without quartz
+      - description: PTP clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 6
+    contains:
+      enum:
+        - stmmaceth
+        - mac-clk-tx
+        - mac-clk-rx
+        - ethstp
+        - eth-ck
+        - ptp_ref
+
+  st,syscon:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: phandle to the syscon node which encompases the glue register
+          - description: offset of the control register
+    description:
+      Should be phandle/offset pair. The phandle to the syscon node which
+      encompases the glue register, and the offset of the control register
+
+  st,eth-clk-sel:
+    description:
+      set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
+    type: boolean
+
+  st,eth-ref-clk-sel:
+    description:
+      set this property in RMII mode when you have PHY without crystal 50MHz and want to
+      select RCC clock instead of ETH_REF_CLK.
+    type: boolean
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - st,syscon
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    #include <dt-bindings/mfd/stm32h7-rcc.h>
+    //Example 1
+     ethernet0: ethernet@5800a000 {
+           compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+           reg = <0x5800a000 0x2000>;
+           reg-names = "stmmaceth";
+           interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "macirq";
+           clock-names = "stmmaceth",
+                     "mac-clk-tx",
+                     "mac-clk-rx",
+                     "ethstp",
+                     "eth-ck";
+           clocks = <&rcc ETHMAC>,
+                <&rcc ETHTX>,
+                <&rcc ETHRX>,
+                <&rcc ETHSTP>,
+                <&rcc ETHCK_K>;
+           st,syscon = <&syscfg 0x4>;
+           snps,pbl = <2>;
+           snps,axi-config = <&stmmac_axi_config_0>;
+           snps,tso;
+           phy-mode = "rgmii";
+       };
+
+  - |
+    //Example 2 (MCU example)
+     ethernet1: ethernet@40028000 {
+           compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+           reg = <0x40028000 0x8000>;
+           reg-names = "stmmaceth";
+           interrupts = <0 61 0>, <0 62 0>;
+           interrupt-names = "macirq", "eth_wake_irq";
+           clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+           clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+           st,syscon = <&syscfg 0x4>;
+           snps,pbl = <8>;
+           snps,mixed-burst;
+           phy-mode = "mii";
+       };
+
+  - |
+    //Example 3
+     ethernet2: ethernet@40027000 {
+           compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
+           reg = <0x40028000 0x8000>;
+           reg-names = "stmmaceth";
+           interrupts = <61>;
+           interrupt-names = "macirq";
+           clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+           clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>;
+           st,syscon = <&syscfg 0x4>;
+           snps,pbl = <8>;
+           phy-mode = "mii";
+       };
diff --git a/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml
new file mode 100644
index 000000000000..5b130097449b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/sunplus,sp7021-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Dual Ethernet MAC
+
+maintainers:
+  - Wells Lu <wellslutw@gmail.com>
+
+description: |
+  Sunplus SP7021 dual 10M/100M Ethernet MAC controller.
+  Device node of the controller has following properties.
+
+properties:
+  compatible:
+    const: sunplus,sp7021-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+    description: Ethernet ports to PHY
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^port@[0-1]$":
+        type: object
+        additionalProperties: false
+        description: Port to PHY
+
+        properties:
+          reg:
+            minimum: 0
+            maximum: 1
+
+          phy-handle:
+            maxItems: 1
+
+          phy-mode:
+            maxItems: 1
+
+          nvmem-cells:
+            items:
+              - description: nvmem cell address of MAC address
+
+          nvmem-cell-names:
+            description: names corresponding to the nvmem cells
+            items:
+              - const: mac-address
+
+        required:
+          - reg
+          - phy-handle
+          - phy-mode
+          - nvmem-cells
+          - nvmem-cell-names
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - pinctrl-0
+  - pinctrl-names
+  - ethernet-ports
+  - mdio
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    ethernet@9c108000 {
+        compatible = "sunplus,sp7021-emac";
+        reg = <0x9c108000 0x400>;
+        interrupt-parent = <&intc>;
+        interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0xa7>;
+        resets = <&rstc 0x97>;
+        pinctrl-0 = <&emac_demo_board_v3_pins>;
+        pinctrl-names = "default";
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                phy-handle = <&eth_phy0>;
+                phy-mode = "rmii";
+                nvmem-cells = <&mac_addr0>;
+                nvmem-cell-names = "mac-address";
+            };
+
+            port@1 {
+                reg = <1>;
+                phy-handle = <&eth_phy1>;
+                phy-mode = "rmii";
+                nvmem-cells = <&mac_addr1>;
+                nvmem-cell-names = "mac-address";
+            };
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eth_phy0: ethernet-phy@0 {
+                reg = <0>;
+            };
+
+            eth_phy1: ethernet-phy@1 {
+                reg = <1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/ti,bluetooth.yaml b/Documentation/devicetree/bindings/net/ti,bluetooth.yaml
new file mode 100644
index 000000000000..81616f9fb493
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,bluetooth.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Bluetooth Chips
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+description: |
+  This documents the binding structure and common properties for serial
+  attached TI Bluetooth devices. The following chips are included in this
+  binding:
+
+  * TI CC256x Bluetooth devices
+  * TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
+
+  TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
+  and GPS over what's called "shared transport". The shared transport is
+  standard BT HCI protocol with additional channels for the other functions.
+
+  TI WiLink devices also have a separate WiFi interface as described in
+  wireless/ti,wlcore.yaml.
+
+  This bindings follows the UART slave device binding in ../serial/serial.yaml.
+
+properties:
+  compatible:
+    enum:
+      - ti,cc2560
+      - ti,wl1271-st
+      - ti,wl1273-st
+      - ti,wl1281-st
+      - ti,wl1283-st
+      - ti,wl1285-st
+      - ti,wl1801-st
+      - ti,wl1805-st
+      - ti,wl1807-st
+      - ti,wl1831-st
+      - ti,wl1835-st
+      - ti,wl1837-st
+
+  enable-gpios:
+    maxItems: 1
+
+  vio-supply:
+    description: Vio input supply (1.8V)
+
+  vbat-supply:
+    description: Vbat input supply (2.9-4.8V)
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ext_clock
+
+  max-speed:
+    default: 3000000
+
+  nvmem-cells:
+    maxItems: 1
+    description:
+      Nvmem data cell that contains a 6 byte BD address with the most
+      significant byte first (big-endian).
+
+  nvmem-cell-names:
+    items:
+      - const: bd-address
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    serial {
+            bluetooth {
+                    compatible = "ti,wl1835-st";
+                    enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+                    clocks = <&clk32k_wl18xx>;
+                    clock-names = "ext_clock";
+                    nvmem-cells = <&bd_address>;
+                    nvmem-cell-names = "bd-address";
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index ac8c76369a86..e36c7817be69 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/ti,cpsw-switch.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI SoC Ethernet Switch Controller (CPSW) Device Tree Bindings
+title: TI SoC Ethernet Switch Controller (CPSW)
 
 maintainers:
   - Grygorii Strashko <grygorii.strashko@ti.com>
@@ -23,19 +23,25 @@ properties:
     oneOf:
       - const: ti,cpsw-switch
       - items:
-         - const: ti,am335x-cpsw-switch
-         - const: ti,cpsw-switch
+          - const: ti,am335x-cpsw-switch
+          - const: ti,cpsw-switch
       - items:
-        - const: ti,am4372-cpsw-switch
-        - const: ti,cpsw-switch
+          - const: ti,am4372-cpsw-switch
+          - const: ti,cpsw-switch
       - items:
-        - const: ti,dra7-cpsw-switch
-        - const: ti,cpsw-switch
+          - const: ti,dra7-cpsw-switch
+          - const: ti,cpsw-switch
 
   reg:
     maxItems: 1
     description:
-       The physical base address and size of full the CPSW module IO range
+      The physical base address and size of full the CPSW module IO range
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
 
   ranges: true
 
@@ -64,13 +70,15 @@ properties:
   pinctrl-names: true
 
   syscon:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Phandle to the system control device node which provides access to
       efuse IO range with MAC addresses
 
   ethernet-ports:
     type: object
+    additionalProperties: false
+
     properties:
       '#address-cells':
         const: 1
@@ -79,47 +87,40 @@ properties:
 
     patternProperties:
       "^port@[0-9]+$":
-          type: object
-          description: CPSW external ports
-
-          allOf:
-            - $ref: ethernet-controller.yaml#
-
-          properties:
-            reg:
-              items:
-                - enum: [1, 2]
-              description: CPSW port number
-
-            phys:
-              maxItems: 1
-              description:  phandle on phy-gmii-sel PHY
-
-            label:
-              description: label associated with this port
-
-            ti,dual-emac-pvid:
-              allOf:
-                - $ref: /schemas/types.yaml#/definitions/uint32
-              minimum: 1
-              maximum: 1024
-              description:
-                Specifies default PORT VID to be used to segregate
-                ports. Default value - CPSW port number.
-
-          required:
-            - reg
-            - phys
-
-  mdio:
-    type: object
-    allOf:
-      - $ref: "ti,davinci-mdio.yaml#"
-    description:
-      CPSW MDIO bus.
+        type: object
+        description: CPSW external ports
+
+        $ref: ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            items:
+              - enum: [1, 2]
+            description: CPSW port number
+
+          phys:
+            maxItems: 1
+            description: phandle on phy-gmii-sel PHY
+
+          label:
+            description: label associated with this port
+
+          ti,dual-emac-pvid:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 1
+            maximum: 1024
+            description:
+              Specifies default PORT VID to be used to segregate
+              ports. Default value - CPSW port number.
+
+        required:
+          - reg
+          - phys
 
   cpts:
     type: object
+    unevaluatedProperties: false
     description:
       The Common Platform Time Sync (CPTS) module
 
@@ -148,6 +149,14 @@ properties:
       - clocks
       - clock-names
 
+patternProperties:
+  "^mdio@":
+    type: object
+    description:
+      CPSW MDIO bus.
+    $ref: "ti,davinci-mdio.yaml#"
+
+
 required:
   - compatible
   - reg
@@ -159,6 +168,8 @@ required:
   - '#address-cells'
   - '#size-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -174,7 +185,6 @@ examples:
         #address-cells = <1>;
         #size-cells = <1>;
         syscon = <&scm_conf>;
-        inctrl-names = "default", "sleep";
 
         interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
index 242ac4935a4b..a339202c5e8e 100644
--- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
@@ -18,39 +18,46 @@ allOf:
 properties:
   compatible:
     oneOf:
-       - const: ti,davinci_mdio
-       - items:
-         - const: ti,keystone_mdio
-         - const: ti,davinci_mdio
-       - items:
-         - const: ti,cpsw-mdio
-         - const: ti,davinci_mdio
-       - items:
-         - const: ti,am4372-mdio
-         - const: ti,cpsw-mdio
-         - const: ti,davinci_mdio
+      - const: ti,davinci_mdio
+      - items:
+          - const: ti,keystone_mdio
+          - const: ti,davinci_mdio
+      - items:
+          - const: ti,cpsw-mdio
+          - const: ti,davinci_mdio
+      - items:
+          - const: ti,am4372-mdio
+          - const: ti,cpsw-mdio
+          - const: ti,davinci_mdio
 
   reg:
     maxItems: 1
 
   bus_freq:
-      maximum: 2500000
-      description:
-        MDIO Bus frequency
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 2500000
+    description: MDIO Bus frequency
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
 
   ti,hwmods:
     description: TI hwmod name
     deprecated: true
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - items:
-          const: davinci_mdio
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      const: davinci_mdio
 
 if:
   properties:
     compatible:
       contains:
         const: ti,davinci_mdio
+then:
   required:
     - bus_freq
 
@@ -60,6 +67,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+unevaluatedProperties: false
+
 examples:
   - |
     davinci_mdio: mdio@4a101000 {
diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
new file mode 100644
index 000000000000..f2489a9c852f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/ti,dp83822.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI DP83822 ethernet PHY
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The DP83822 is a low-power, single-port, 10/100 Mbps Ethernet PHY. It
+  provides all of the physical layer functions needed to transmit and receive
+  data over standard, twisted-pair cables or to connect to an external,
+  fiber-optic transceiver. Additionally, the DP83822 provides flexibility to
+  connect to a MAC through a standard MII, RMII, or RGMII interface
+
+  Specifications about the Ethernet PHY can be found at:
+    http://www.ti.com/lit/ds/symlink/dp83822i.pdf
+
+allOf:
+  - $ref: "ethernet-phy.yaml#"
+
+properties:
+  reg:
+    maxItems: 1
+
+  ti,link-loss-low:
+    type: boolean
+    description: |
+       DP83822 PHY in Fiber mode only.
+       Sets the DP83822 to detect a link drop condition when the signal goes
+       high.  If not set then link drop will occur when the signal goes low.
+       This property is only applicable if the fiber mode support is strapped
+       to on.
+
+  ti,fiber-mode:
+    type: boolean
+    description: |
+       DP83822 PHY only.
+       If present the DP83822 PHY is configured to operate in fiber mode
+       Fiber mode support can also be strapped. If the strap pin is not set
+       correctly or not set at all then this boolean can be used to enable it.
+       If the fiber mode is not strapped then signal detection for the PHY
+       is disabled.
+       In fiber mode, auto-negotiation is disabled and the PHY can only work in
+       100base-fx (full and half duplex) modes.
+
+  rx-internal-delay-ps:
+    description: |
+       DP83822 PHY only.
+       Setting this property to a non-zero number sets the RX internal delay
+       for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
+       to receive data.
+
+  tx-internal-delay-ps:
+    description: |
+       DP83822 PHY only.
+       Setting this property to a non-zero number sets the TX internal delay
+       for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
+       to transmit data.
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+        rx-internal-delay-ps = <1>;
+        tx-internal-delay-ps = <1>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
deleted file mode 100644
index 44e2a4fab29e..000000000000
--- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-* Texas Instruments - dp83867 Giga bit ethernet phy
-
-Required properties:
-	- reg - The ID number for the phy, usually a small integer
-	- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values. Required only if interface type is
-		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID
-	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values. Required only if interface type is
-		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID
-
-Note: If the interface type is PHY_INTERFACE_MODE_RGMII the TX/RX clock delays
-      will be left at their default values, as set by the PHY's pin strapping.
-      The default strapping will use a delay of 2.00 ns.  Thus
-      PHY_INTERFACE_MODE_RGMII, by default, does not behave as RGMII with no
-      internal delay, but as PHY_INTERFACE_MODE_RGMII_ID.  The device tree
-      should use "rgmii-id" if internal delays are desired as this may be
-      changed in future to cause "rgmii" mode to disable delays.
-
-Optional property:
-	- ti,min-output-impedance - MAC Interface Impedance control to set
-				    the programmable output impedance to
-				    minimum value (35 ohms).
-	- ti,max-output-impedance - MAC Interface Impedance control to set
-				    the programmable output impedance to
-				    maximum value (70 ohms).
-	- ti,dp83867-rxctrl-strap-quirk - This denotes the fact that the
-				    board has RX_DV/RX_CTRL pin strapped in
-				    mode 1 or 2. To ensure PHY operation,
-				    there are specific actions that
-				    software needs to take when this pin is
-				    strapped in these modes. See data manual
-				    for details.
-	- ti,clk-output-sel - Muxing option for CLK_OUT pin.  See dt-bindings/net/ti-dp83867.h
-			      for applicable values.  The CLK_OUT pin can also
-			      be disabled by this property.  When omitted, the
-			      PHY's default will be left as is.
-	- ti,sgmii-ref-clock-output-enable - This denotes which
-				    SGMII configuration is used (4 or 6-wire modes).
-				    Some MACs work with differential SGMII clock.
-				    See data manual for details.
-
-	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
-		for applicable values (deprecated)
-
-	-tx-fifo-depth - As defined in the ethernet-controller.yaml.  Values for
-			 the depth can be found in dt-bindings/net/ti-dp83867.h
-	-rx-fifo-depth - As defined in the ethernet-controller.yaml.  Values for
-			 the depth can be found in dt-bindings/net/ti-dp83867.h
-
-Note: ti,min-output-impedance and ti,max-output-impedance are mutually
-      exclusive. When both properties are present ti,max-output-impedance
-      takes precedence.
-
-Default child nodes are standard Ethernet PHY device
-nodes as described in Documentation/devicetree/bindings/net/phy.txt
-
-Example:
-
-	ethernet-phy@0 {
-		reg = <0>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
-		tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-	};
-
-Datasheet can be found:
-http://www.ti.com/product/DP83867IR/datasheet
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
new file mode 100644
index 000000000000..b8c0e4b5b494
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/ti,dp83867.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI DP83867 ethernet PHY
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The DP83867 device is a robust, low power, fully featured Physical Layer
+  transceiver with integrated PMD sublayers to support 10BASE-Te, 100BASE-TX
+  and 1000BASE-T Ethernet protocols.
+
+  The DP83867 is designed for easy implementation of 10/100/1000 Mbps Ethernet
+  LANs. It interfaces directly to twisted pair media via an external
+  transformer. This device interfaces directly to the MAC layer through the
+  IEEE 802.3 Standard Media Independent Interface (MII), the IEEE 802.3 Gigabit
+  Media Independent Interface (GMII) or Reduced GMII (RGMII).
+
+  Specifications about the Ethernet PHY can be found at:
+    https://www.ti.com/lit/gpn/dp83867ir
+
+properties:
+  reg:
+    maxItems: 1
+
+  nvmem-cells:
+    maxItems: 1
+    description:
+      Nvmem data cell containing the value to write to the
+      IO_IMPEDANCE_CTRL field of the IO_MUX_CFG register.
+
+  nvmem-cell-names:
+    items:
+      - const: io_impedance_ctrl
+
+  ti,min-output-impedance:
+    type: boolean
+    description: |
+       MAC Interface Impedance control to set the programmable output impedance
+       to a minimum value (35 ohms).
+
+  ti,max-output-impedance:
+    type: boolean
+    description: |
+      MAC Interface Impedance control to set the programmable output impedance
+      to a maximum value (70 ohms).
+      Note: Specifying an io_impedance_ctrl nvmem cell or one of the
+        ti,min-output-impedance, ti,max-output-impedance properties
+        are mutually exclusive. If more than one is present, an nvmem
+        cell takes precedence over ti,max-output-impedance, which in
+        turn takes precedence over ti,min-output-impedance.
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+       Transmitt FIFO depth see dt-bindings/net/ti-dp83867.h for values
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+       Receive FIFO depth see dt-bindings/net/ti-dp83867.h for values
+
+  ti,clk-output-sel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Muxing option for CLK_OUT pin.  See dt-bindings/net/ti-dp83867.h
+      for applicable values. The CLK_OUT pin can also be disabled by this
+      property.  When omitted, the PHY's default will be left as is.
+
+  ti,rx-internal-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
+      for applicable values. Required only if interface type is
+      PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID.
+
+  ti,tx-internal-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
+      for applicable values. Required only if interface type is
+      PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID.
+
+        Note: If the interface type is PHY_INTERFACE_MODE_RGMII the TX/RX clock
+          delays will be left at their default values, as set by the PHY's pin
+          strapping. The default strapping will use a delay of 2.00 ns.  Thus
+          PHY_INTERFACE_MODE_RGMII, by default, does not behave as RGMII with no
+          internal delay, but as PHY_INTERFACE_MODE_RGMII_ID.  The device tree
+          should use "rgmii-id" if internal delays are desired as this may be
+          changed in future to cause "rgmii" mode to disable delays.
+
+  ti,dp83867-rxctrl-strap-quirk:
+    type: boolean
+    description: |
+      This denotes the fact that the board has RX_DV/RX_CTRL pin strapped in
+      mode 1 or 2. To ensure PHY operation, there are specific actions that
+      software needs to take when this pin is strapped in these modes.
+      See data manual for details.
+
+  ti,sgmii-ref-clock-output-enable:
+    type: boolean
+    description: |
+      This denotes which SGMII configuration is used (4 or 6-wire modes).
+      Some MACs work with differential SGMII clock. See data manual for details.
+
+  ti,fifo-depth:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable
+      values.
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/net/ti-dp83867.h>
+    mdio0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+        tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+        rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+        ti,max-output-impedance;
+        ti,clk-output-sel = <DP83867_CLK_O_SEL_CHN_A_RCLK>;
+        ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+        ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
index 6fe3e451da8a..b04ff0014a59 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
 # Copyright (C) 2019 Texas Instruments Incorporated
 %YAML 1.2
 ---
@@ -8,10 +8,10 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: TI DP83869 ethernet PHY
 
 allOf:
-  - $ref: "ethernet-controller.yaml#"
+  - $ref: "ethernet-phy.yaml#"
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The DP83869HM device is a robust, fully-featured Gigabit (PHY) transceiver
@@ -24,7 +24,7 @@ description: |
   conversions.  The DP83869HM can also support Bridge Conversion from RGMII to
   SGMII and SGMII to RGMII.
 
-  Specifications about the charger can be found at:
+  Specifications about the Ethernet PHY can be found at:
     http://www.ti.com/lit/ds/symlink/dp83869hm.pdf
 
 properties:
@@ -44,29 +44,43 @@ properties:
        to a maximum value (70 ohms).
 
   tx-fifo-depth:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
        Transmitt FIFO depth see dt-bindings/net/ti-dp83869.h for values
 
   rx-fifo-depth:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
        Receive FIFO depth see dt-bindings/net/ti-dp83869.h for values
 
   ti,clk-output-sel:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
        Muxing option for CLK_OUT pin see dt-bindings/net/ti-dp83869.h for values.
 
   ti,op-mode:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
        Operational mode for the PHY.  If this is not set then the operational
        mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values
 
+  rx-internal-delay-ps:
+    description: Delay is in pico seconds
+    enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000,
+            3250, 3500, 3750, 4000 ]
+    default: 2000
+
+  tx-internal-delay-ps:
+    description: Delay is in pico seconds
+    enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000,
+            3250, 3500, 3750, 4000 ]
+    default: 2000
+
 required:
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/net/ti-dp83869.h>
@@ -78,7 +92,9 @@ examples:
         tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
         rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
         ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
-        ti,max-output-impedance = "true";
+        ti,max-output-impedance;
         ti,clk-output-sel = <DP83869_CLK_O_SEL_CHN_A_RCLK>;
+        rx-internal-delay-ps = <2000>;
+        tx-internal-delay-ps = <2000>;
       };
     };
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
new file mode 100644
index 000000000000..821974815dec
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -0,0 +1,279 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller)
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+  - Sekhar Nori <nsekhar@ti.com>
+
+description:
+  The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports
+  (one external) and provides Ethernet packet communication for the device.
+  The TI AM642x SoC Gigabit Ethernet MAC (CPSW3G NUSS) has three ports
+  (two external) and provides Ethernet packet communication and switching.
+
+  The internal Communications Port Programming Interface (CPPI5) (Host port 0).
+  Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels
+  and one RX channels and operating by NAVSS Unified DMA  Peripheral Root
+  Complex (UDMA-P) controller.
+
+  CPSWxG features
+  updated Address Lookup Engine (ALE).
+  priority level Quality Of Service (QOS) support (802.1p)
+  Support for Audio/Video Bridging (P802.1Qav/D6.0)
+  Support for IEEE 1588 Clock Synchronization (2008 Annex D, Annex E and Annex F)
+  Flow Control (802.3x) Support
+  Time Sensitive Network Support
+  IEEE P902.3br/D2.0 Interspersing Express Traffic
+  IEEE 802.1Qbv/D2.2 Enhancements for Scheduled Traffic
+  Configurable number of addresses plus VLANs
+  Configurable number of classifier/policers
+  VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on
+  ingress, Auto VLAN removal on egress and auto pad to minimum frame size.
+  RX/TX csum offload
+  Management Data Input/Output (MDIO) interface for PHYs management
+  RMII/RGMII Interfaces support
+  new version of Common Platform Time Sync (CPTS)
+
+  The CPSWxG NUSS is integrated into
+    device MCU domain named MCU_CPSW0 on AM654x/J721E SoC.
+    device MAIN domain named CPSW0 on AM642x SoC.
+
+  Specifications can be found at
+    https://www.ti.com/lit/pdf/spruid7
+    https://www.ti.com/lit/zip/spruil1
+    https://www.ti.com/lit/pdf/spruim2
+
+properties:
+  "#address-cells": true
+  "#size-cells": true
+
+  compatible:
+    enum:
+      - ti,am654-cpsw-nuss
+      - ti,j7200-cpswxg-nuss
+      - ti,j721e-cpsw-nuss
+      - ti,am642-cpsw-nuss
+
+  reg:
+    maxItems: 1
+    description:
+      The physical base address and size of full the CPSWxG NUSS IO range
+
+  reg-names:
+    items:
+      - const: cpsw_nuss
+
+  ranges: true
+
+  dma-coherent: true
+
+  clocks:
+    maxItems: 1
+    description: CPSWxG NUSS functional clock
+
+  clock-names:
+    items:
+      - const: fck
+
+  assigned-clock-parents: true
+
+  assigned-clocks: true
+
+  power-domains:
+    maxItems: 1
+
+  dmas:
+    maxItems: 9
+
+  dma-names:
+    items:
+      - const: tx0
+      - const: tx1
+      - const: tx2
+      - const: tx3
+      - const: tx4
+      - const: tx5
+      - const: tx6
+      - const: tx7
+      - const: rx
+
+  ethernet-ports:
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^port@[1-4]$":
+        type: object
+        description: CPSWxG NUSS external ports
+
+        $ref: ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            minimum: 1
+            maximum: 4
+            description: CPSW port number
+
+          phys:
+            maxItems: 1
+            description: phandle on phy-gmii-sel PHY
+
+          label:
+            description: label associated with this port
+
+          ti,mac-only:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Specifies the port works in mac-only mode.
+
+          ti,syscon-efuse:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+            items:
+              - items:
+                  - description: Phandle to the system control device node which
+                      provides access to efuse
+                  - description: offset to efuse registers???
+            description:
+              Phandle to the system control device node which provides access
+              to efuse IO range with MAC addresses
+
+        required:
+          - reg
+          - phys
+
+    additionalProperties: false
+
+patternProperties:
+  "^mdio@[0-9a-f]+$":
+    type: object
+    $ref: "ti,davinci-mdio.yaml#"
+
+    description:
+      CPSW MDIO bus.
+
+  "^cpts@[0-9a-f]+":
+    type: object
+    $ref: "ti,k3-am654-cpts.yaml#"
+    description:
+      CPSW Common Platform Time Sync (CPTS) module.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ranges
+  - clocks
+  - clock-names
+  - power-domains
+  - dmas
+  - dma-names
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: ti,j7200-cpswxg-nuss
+    then:
+      properties:
+        ethernet-ports:
+          patternProperties:
+            "^port@[3-4]$": false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/k3.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/net/ti-dp83867.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mcu_cpsw: ethernet@46000000 {
+            compatible = "ti,am654-cpsw-nuss";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            reg = <0x0 0x46000000 0x0 0x200000>;
+            reg-names = "cpsw_nuss";
+            ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+            dma-coherent;
+            clocks = <&k3_clks 5 10>;
+            clock-names = "fck";
+            power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+
+            dmas = <&mcu_udmap 0xf000>,
+                   <&mcu_udmap 0xf001>,
+                   <&mcu_udmap 0xf002>,
+                   <&mcu_udmap 0xf003>,
+                   <&mcu_udmap 0xf004>,
+                   <&mcu_udmap 0xf005>,
+                   <&mcu_udmap 0xf006>,
+                   <&mcu_udmap 0xf007>,
+                   <&mcu_udmap 0x7000>;
+            dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+                        "rx";
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                cpsw_port1: port@1 {
+                    reg = <1>;
+                    ti,mac-only;
+                    label = "port1";
+                    ti,syscon-efuse = <&mcu_conf 0x200>;
+                    phys = <&phy_gmii_sel 1>;
+
+                    phy-mode = "rgmii-rxid";
+                    phy-handle = <&phy0>;
+                };
+            };
+
+            davinci_mdio: mdio@f00 {
+                compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+                reg = <0x0 0xf00 0x0 0x100>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                clocks = <&k3_clks 5 10>;
+                clock-names = "fck";
+                bus_freq = <1000000>;
+
+                phy0: ethernet-phy@0 {
+                    reg = <0>;
+                    ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+                    ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+                };
+            };
+        };
+
+        cpts@3d000 {
+             compatible = "ti,am65-cpts";
+             reg = <0x0 0x3d000 0x0 0x400>;
+             clocks = <&k3_clks 18 2>;
+             clock-names = "cpts";
+             interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+             interrupt-names = "cpts";
+             ti,cpts-ext-ts-inputs = <4>;
+             ti,cpts-periodic-outputs = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
new file mode 100644
index 000000000000..6230f576134b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,k3-am654-cpts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+  - Sekhar Nori <nsekhar@ti.com>
+
+description: |+
+  The TI AM654x/J721E CPTS module is used to facilitate host control of time
+  sync operations.
+  Main features of CPTS module are
+  - selection of multiple external clock sources
+  - Software control of time sync events via interrupt or polling
+  - 64-bit timestamp mode in ns with PPM and nudge adjustment.
+  - hardware timestamp push inputs (HWx_TS_PUSH)
+  - timestamp counter compare output (TS_COMP)
+  - timestamp counter bit output (TS_SYNC)
+  - periodic Generator function outputs (TS_GENFx)
+  - Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) (TSN)
+  - external hardware timestamp push inputs (HWx_TS_PUSH) timestamping
+
+   Depending on integration it enables compliance with the IEEE 1588-2008
+   standard for a precision clock synchronization protocol, Ethernet Enhanced
+   Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time
+   Measurement (PTM).
+
+  TI AM654x/J721E SoCs has several similar CPTS modules integrated into the
+  different parts of the system which could be synchronized with each other
+  - Main CPTS
+  - MCU CPSW CPTS with IEEE 1588-2008 support
+  - PCIe subsystem CPTS for PTM support
+
+  Depending on CPTS module integration and when CPTS is integral part of
+  another module (MCU CPSW for example) "compatible" and "reg" can
+  be omitted - parent module is fully responsible for CPTS enabling and
+  configuration.
+
+properties:
+  $nodename:
+    pattern: "^cpts@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - ti,am65-cpts
+      - ti,j721e-cpts
+
+  reg:
+    maxItems: 1
+    description:
+      The physical base address and size of CPTS IO range
+
+  reg-names:
+    items:
+      - const: cpts
+
+  clocks:
+    maxItems: 1
+    description: CPTS reference clock
+
+  clock-names:
+    items:
+      - const: cpts
+
+  interrupts:
+    items:
+      - description: CPTS events interrupt
+
+  interrupt-names:
+    items:
+      - const: cpts
+
+  assigned-clock-parents: true
+
+  assigned-clocks: true
+
+  power-domains:
+    maxItems: 1
+
+  ti,cpts-ext-ts-inputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 8
+    description:
+      Number of hardware timestamp push inputs (HWx_TS_PUSH)
+
+  ti,cpts-periodic-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 8
+    description:
+      Number of timestamp Generator function outputs (TS_GENFx)
+
+  refclk-mux:
+    type: object
+    additionalProperties: false
+    description: CPTS reference clock multiplexer clock
+    properties:
+      '#clock-cells':
+        const: 0
+
+      clocks:
+        maxItems: 8
+
+    required:
+      - clocks
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cpts@310d0000 {
+         compatible = "ti,am65-cpts";
+         reg = <0x310d0000 0x400>;
+         reg-names = "cpts";
+         clocks = <&main_cpts_mux>;
+         clock-names = "cpts";
+         interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>;
+         interrupt-names = "cpts";
+         ti,cpts-periodic-outputs = <6>;
+         ti,cpts-ext-ts-inputs = <8>;
+
+         main_cpts_mux: refclk-mux {
+               #clock-cells = <0>;
+               clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+                        <&k3_clks 157 91>, <&k3_clks 157 77>,
+                        <&k3_clks 157 102>, <&k3_clks 157 80>,
+                        <&k3_clks 120 3>, <&k3_clks 121 3>;
+               assigned-clocks = <&main_cpts_mux>;
+               assigned-clock-parents = <&k3_clks 118 11>;
+         };
+    };
diff --git a/Documentation/devicetree/bindings/net/ti-bluetooth.txt b/Documentation/devicetree/bindings/net/ti-bluetooth.txt
deleted file mode 100644
index 6d03ff8c7068..000000000000
--- a/Documentation/devicetree/bindings/net/ti-bluetooth.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Texas Instruments Bluetooth Chips
----------------------------------
-
-This documents the binding structure and common properties for serial
-attached TI Bluetooth devices. The following chips are included in this
-binding:
-
-* TI CC256x Bluetooth devices
-* TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
-
-TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
-and GPS over what's called "shared transport". The shared transport is
-standard BT HCI protocol with additional channels for the other functions.
-
-TI WiLink devices also have a separate WiFi interface as described in
-wireless/ti,wlcore.txt.
-
-This bindings follows the UART slave device binding in
-../serial/slave-device.txt.
-
-Required properties:
- - compatible: should be one of the following:
-    "ti,cc2560"
-    "ti,wl1271-st"
-    "ti,wl1273-st"
-    "ti,wl1281-st"
-    "ti,wl1283-st"
-    "ti,wl1285-st"
-    "ti,wl1801-st"
-    "ti,wl1805-st"
-    "ti,wl1807-st"
-    "ti,wl1831-st"
-    "ti,wl1835-st"
-    "ti,wl1837-st"
-
-Optional properties:
- - enable-gpios : GPIO signal controlling enabling of BT. Active high.
- - vio-supply : Vio input supply (1.8V)
- - vbat-supply : Vbat input supply (2.9-4.8V)
- - clocks : Must contain an entry, for each entry in clock-names.
-   See ../clocks/clock-bindings.txt for details.
- - clock-names : Must include the following entry:
-   "ext_clock" (External clock provided to the TI combo chip).
- - nvmem-cells: phandle to nvmem data cell that contains a 6 byte BD address
-   with the most significant byte first (big-endian).
- - nvmem-cell-names: "bd-address" (required when nvmem-cells is specified)
-
-Example:
-
-&serial0 {
-	compatible = "ns16550a";
-	...
-	bluetooth {
-		compatible = "ti,wl1835-st";
-		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		clocks = <&clk32k_wl18xx>;
-		clock-names = "ext_clock";
-		nvmem-cells = <&bd_address>;
-		nvmem-cell-names = "bd-address";
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
new file mode 100644
index 000000000000..0988ed8d1c12
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/toshiba,visconti-dwmac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Toshiba Visconti DWMAC Ethernet controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - toshiba,visconti-dwmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - toshiba,visconti-dwmac
+          - const: snps,dwmac-4.20a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: main clock
+      - description: PHY reference clock
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: phy_ref_clk
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/toshiba,tmpv770x.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        piether: ethernet@28000000 {
+            compatible = "toshiba,visconti-dwmac", "snps,dwmac-4.20a";
+            reg = <0 0x28000000 0 0x10000>;
+            interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "macirq";
+            clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>;
+            clock-names = "stmmaceth", "phy_ref_clk";
+            snps,txpbl = <4>;
+            snps,rxpbl = <4>;
+            snps,tso;
+            phy-mode = "rgmii-id";
+            phy-handle = <&phy0>;
+
+            mdio {
+                #address-cells = <0x1>;
+                #size-cells = <0x0>;
+                compatible = "snps,dwmac-mdio";
+
+                phy0: ethernet-phy@1 {
+                    device_type = "ethernet-phy";
+                    reg = <0x1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
new file mode 100644
index 000000000000..6a71f694cb55
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/vertexcom-mse102x.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: The Vertexcom MSE102x (SPI)
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@chargebyte.com>
+
+description:
+  Vertexcom's MSE102x are a family of HomePlug GreenPHY chips.
+  They can be connected either via RGMII, RMII or SPI to a host CPU.
+
+  In order to use a MSE102x chip as SPI device, it must be defined as
+  a child of an SPI master device in the device tree.
+
+  More information can be found at
+    http://www.vertexcom.com/doc/MSE1022%20Product%20Brief.pdf
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - vertexcom,mse1021
+      - vertexcom,mse1022
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    minimum: 6000000
+    maximum: 7142857
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-cpha
+  - spi-cpol
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "vertexcom,mse1021";
+            reg = <0>;
+            interrupt-parent = <&gpio>;
+            interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+            spi-cpha;
+            spi-cpol;
+            spi-max-frequency = <7142857>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
new file mode 100644
index 000000000000..fec1cc9b9a08
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4329 family fullmac wireless SDIO/PCIE devices
+
+maintainers:
+  - Arend van Spriel <arend@broadcom.com>
+
+description:
+  The Broadcom Single chip MAC part for the BCM4329 family and
+  later Cypress chips in the same family named CYW4373 and similar.
+  These chips also have a Bluetooth portion described in a separate
+  binding.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm43143-fmac
+              - brcm,bcm4341b0-fmac
+              - brcm,bcm4341b4-fmac
+              - brcm,bcm4341b5-fmac
+              - brcm,bcm4329-fmac
+              - brcm,bcm4330-fmac
+              - brcm,bcm4334-fmac
+              - brcm,bcm43340-fmac
+              - brcm,bcm4335-fmac
+              - brcm,bcm43362-fmac
+              - brcm,bcm4339-fmac
+              - brcm,bcm43430a0-fmac
+              - brcm,bcm43430a1-fmac
+              - brcm,bcm43455-fmac
+              - brcm,bcm43456-fmac
+              - brcm,bcm4354-fmac
+              - brcm,bcm4356-fmac
+              - brcm,bcm4359-fmac
+              - cypress,cyw4373-fmac
+              - cypress,cyw43012-fmac
+          - const: brcm,bcm4329-fmac
+      - enum:
+          - brcm,bcm4329-fmac
+          - pci14e4,43dc  # BCM4355
+          - pci14e4,4464  # BCM4364
+          - pci14e4,4488  # BCM4377
+          - pci14e4,4425  # BCM4378
+          - pci14e4,4433  # BCM4387
+
+  reg:
+    description: SDIO function number for the device (for most cases
+      this will be 1) or PCI device identifier.
+
+  interrupts:
+    maxItems: 1
+    description: Out-of-band (OOB) IRQ line for waking up the host
+      in response to WLAN activity. This corresponds to the HOST_WAKE
+      line into the chip.
+
+  interrupt-names:
+    description: Name for the OOB IRQ, this must be set to "host-wake".
+    const: host-wake
+
+  brcm,drive-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Drive strength used for the SDIO pins on the device in mA.
+    minimum: 0
+    maximum: 32
+
+  reset-gpios:
+    maxItems: 1
+    description: A GPIO line connected to the WL_RST line, if present
+      this shall be flagged as active low.
+
+  brcm,ccode-map:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Multiple strings for translating ISO3166 country code to
+      brcmfmac firmware country code and revision.
+    items:
+      pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$'
+
+  brcm,ccode-map-trivial:
+    description: |
+      Use a trivial mapping of ISO3166 country codes to brcmfmac firmware
+      country code and revision: cc -> { cc, 0 }. In other words, assume that
+      the CLM blob firmware uses ISO3166 country codes as well, and that all
+      revisions are zero. This property is mutually exclusive with
+      brcm,ccode-map. If both properties are specified, then brcm,ccode-map
+      takes precedence.
+    type: boolean
+
+  brcm,cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Wi-Fi radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device if present.
+
+  brcm,board-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Overrides the board type, which is normally the compatible of
+      the root node. This can be used to decouple the overall system board or
+      device name from the board type for WiFi purposes, which is used to
+      construct firmware and NVRAM configuration filenames, allowing for
+      multiple devices that share the same module or characteristics for the
+      WiFi subsystem to share the same firmware/NVRAM files. On Apple platforms,
+      this should be the Apple module-instance codename prefixed by "apple,",
+      e.g. "apple,honshu".
+
+  apple,antenna-sku:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Antenna SKU used to identify a specific antenna configuration
+      on Apple platforms. This is use to build firmware filenames, to allow
+      platforms with different antenna configs to have different firmware and/or
+      NVRAM. This would normally be filled in by the bootloader from platform
+      configuration data.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    mmc@80118000 {
+      compatible = "arm,pl18x", "arm,primecell";
+      reg = <0x80118000 0x1000>;
+      clocks = <&clk 0>, <&clk 1>;
+      clock-names = "mclk", "apb_pclk";
+      interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+      bus-width = <4>;
+      non-removable;
+      vmmc-supply = <&wl_bt_reg>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      wifi@1 {
+        compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+        reg = <1>;
+        interrupt-parent = <&gpio>;
+        interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "host-wake";
+        reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+        brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
deleted file mode 100644
index cffb2d6876e3..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Broadcom BCM43xx Fullmac wireless SDIO devices
-
-This node provides properties for controlling the Broadcom wireless device. The
-node is expected to be specified as a child node to the SDIO controller that
-connects the device to the system.
-
-Required properties:
-
- - compatible : Should be "brcm,bcm4329-fmac".
-
-Optional properties:
- - brcm,drive-strength : drive strength used for SDIO pins on device in mA
-	(default = 6).
- - interrupts : specifies attributes for the out-of-band interrupt (host-wake).
-	When not specified the device will use in-band SDIO interrupts.
- - interrupt-names : name of the out-of-band interrupt, which must be set
-	to "host-wake".
-
-Example:
-
-mmc3: mmc@1c12000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>;
-	vmmc-supply = <&reg_vmmc3>;
-	bus-width = <4>;
-	non-removable;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&pio>;
-		interrupts = <10 8>; /* PH10 / EINT10 */
-		interrupt-names = "host-wake";
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt
deleted file mode 100644
index 6830c4786f8a..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Espressif ESP8089 wireless SDIO devices
-
-This node provides properties for controlling the ESP8089 wireless device.
-The node is expected to be specified as a child node to the SDIO controller
-that connects the device to the system.
-
-Required properties:
-
- - compatible : Should be "esp,esp8089".
-
-Optional properties:
- - esp,crystal-26M-en: Integer value for the crystal_26M_en firmware parameter
-
-Example:
-
-&mmc1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	vmmc-supply = <&reg_dldo1>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	bus-width = <4>;
-	non-removable;
-
-	esp8089: sdio_wifi@1 {
-		compatible = "esp,esp8089";
-		reg = <1>;
-		esp,crystal-26M-en = <2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml
new file mode 100644
index 000000000000..284ef45add99
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/esp,esp8089.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Espressif ESP8089 Device Tree Bindings
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+
+properties:
+  compatible:
+    const: esp,esp8089
+
+  reg:
+    maxItems: 1
+
+  esp,crystal-26M-en:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Value for the crystal_26M_en firmware parameter
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+      mmc {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          wifi@1 {
+              compatible = "esp,esp8089";
+              reg = <1>;
+              esp,crystal-26M-en = <2>;
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.txt b/Documentation/devicetree/bindings/net/wireless/ieee80211.txt
deleted file mode 100644
index f6442b1397f5..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/ieee80211.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Common IEEE 802.11 properties
-
-This provides documentation of common properties that are valid for all wireless
-devices.
-
-Optional properties:
- - ieee80211-freq-limit : list of supported frequency ranges in KHz. This can be
-	used for devices that in a given config support less channels than
-	normally. It may happen chipset supports a wide wireless band but it is
-	limited to some part of it due to used antennas or power amplifier.
-	An example case for this can be tri-band wireless router with two
-	identical chipsets used for two different 5 GHz subbands. Using them
-	incorrectly could not work or decrease performance noticeably.
-
-Example:
-
-pcie@0,0 {
-	reg = <0x0000 0 0 0 0>;
-	wifi@0,0 {
-		reg = <0x0000 0 0 0 0>;
-		ieee80211-freq-limit = <2402000 2482000>,
-				       <5170000 5250000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml
new file mode 100644
index 000000000000..d58e1571df9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/ieee80211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common IEEE 802.11 Binding
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description: |
+  This provides documentation of common properties that are valid for
+  all wireless devices
+
+properties:
+  ieee80211-freq-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 2
+      maxItems: 2
+    description:
+      List of supported frequency ranges in KHz. This can be used for devices
+      that in a given config support less channels than normally. It may happen
+      chipset supports a wide wireless band but it is limited to some part of
+      it due to used antennas or power amplifier. An example case for this
+      can be tri-band wireless router with two identical chipsets used for two
+      different 5 GHz subbands. Using them incorrectly could not work or
+      decrease performance noticeably
+
+additionalProperties: true
+
+examples:
+  - |
+    pcie0 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      wifi@0,0 {
+        reg = <0x0000 0 0 0 0>;
+        ieee80211-freq-limit = <2402000 2482000>,
+                               <5170000 5250000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
deleted file mode 100644
index 7e675dafc256..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* MediaTek mt76xx devices
-
-This node provides properties for configuring the MediaTek mt76xx wireless
-device. The node is expected to be specified as a child node of the PCI
-controller to which the wireless chip is connected.
-
-Alternatively, it can specify the wireless part of the MT7628/MT7688 SoC.
-For SoC, use the compatible string "mediatek,mt7628-wmac" and the following
-properties:
-
-- reg: Address and length of the register set for the device.
-- interrupts: Main device interrupt
-
-Optional properties:
-
-- ieee80211-freq-limit: See ieee80211.txt
-- mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data
-
-The MAC address can as well be set with corresponding optional properties
-defined in net/ethernet.txt.
-
-Optional nodes:
-- led: Properties for a connected LED
-  Optional properties:
-    - led-sources: See Documentation/devicetree/bindings/leds/common.txt
-
-&pcie {
-	pcie0 {
-		wifi@0,0 {
-			compatible = "mediatek,mt76";
-			reg = <0x0000 0 0 0 0>;
-			ieee80211-freq-limit = <5000000 6000000>;
-			mediatek,mtd-eeprom = <&factory 0x8000>;
-
-			led {
-				led-sources = <2>;
-			};
-		};
-	};
-};
-
-MT7628 example:
-
-wmac: wmac@10300000 {
-	compatible = "mediatek,mt7628-wmac";
-	reg = <0x10300000 0x100000>;
-
-	interrupt-parent = <&cpuintc>;
-	interrupts = <6>;
-
-	mediatek,mtd-eeprom = <&factory 0x0000>;
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
new file mode 100644
index 000000000000..70e328589cfb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
@@ -0,0 +1,286 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek mt76 wireless devices Generic Binding
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Ryder Lee <ryder.lee@mediatek.com>
+
+description: |
+  This node provides properties for configuring the MediaTek mt76xx
+  wireless device. The node is expected to be specified as a child
+  node of the PCI controller to which the wireless chip is connected.
+  Alternatively, it can specify the wireless part of the MT7628/MT7688
+  or MT7622/MT7986 SoC.
+
+allOf:
+  - $ref: ieee80211.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt76
+      - mediatek,mt7628-wmac
+      - mediatek,mt7622-wmac
+      - mediatek,mt7986-wmac
+
+  reg:
+    minItems: 1
+    maxItems: 3
+    description:
+      MT7986 should contain 3 regions consys, dcm, and sku, in this order.
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+    description:
+      Specify the consys reset for mt7986.
+
+  reset-names:
+    const: consys
+
+  clocks:
+    maxItems: 2
+    description:
+      Specify the consys clocks for mt7986.
+
+  clock-names:
+    items:
+      - const: mcu
+      - const: ap2conn
+
+  mediatek,infracfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the infrastructure bus fabric syscon node.
+      This property is MT7622 specific
+
+  ieee80211-freq-limit: true
+
+  mediatek,eeprom-data:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      EEPROM data embedded as array.
+
+  mediatek,mtd-eeprom:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to MTD partition
+          - description: offset containing EEPROM data
+    description:
+      Phandle to a MTD partition + offset containing EEPROM data
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Specify if the radio eeprom partition is written in big-endian
+
+  mediatek,eeprom-merge-otp:
+    type: boolean
+    description:
+      Merge EEPROM data with OTP data. Can be used on boards where the flash
+      calibration data is generic and specific calibration data should be
+      pulled from the OTP ROM
+
+  mediatek,disable-radar-background:
+    type: boolean
+    description:
+      Disable/enable radar/CAC detection running on a dedicated offchannel
+      chain available on some hw.
+      Background radar/CAC detection allows to avoid the CAC downtime
+      switching on a different channel during CAC detection on the selected
+      radar channel.
+
+  led:
+    type: object
+    $ref: /schemas/leds/common.yaml#
+    additionalProperties: false
+    properties:
+      led-sources:
+        maxItems: 1
+
+  power-limits:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^r[0-9]+":
+        type: object
+        additionalProperties: false
+        properties:
+          regdomain:
+            $ref: /schemas/types.yaml#/definitions/string
+            description:
+              Regdomain refers to a legal regulatory region. Different
+              countries define different levels of allowable transmitter
+              power, time that a channel can be occupied, and different
+              available channels
+            enum:
+              - FCC
+              - ETSI
+              - JP
+
+        patternProperties:
+          "^txpower-[256]g$":
+            type: object
+            additionalProperties: false
+            patternProperties:
+              "^b[0-9]+$":
+                type: object
+                additionalProperties: false
+                properties:
+                  channels:
+                    $ref: /schemas/types.yaml#/definitions/uint32-array
+                    minItems: 2
+                    maxItems: 2
+                    description:
+                      Pairs of first and last channel number of the selected
+                      band
+
+                  rates-cck:
+                    $ref: /schemas/types.yaml#/definitions/uint8-array
+                    minItems: 4
+                    maxItems: 4
+                    description:
+                      4 half-dBm per-rate power limit values
+
+                  rates-ofdm:
+                    $ref: /schemas/types.yaml#/definitions/uint8-array
+                    minItems: 8
+                    maxItems: 8
+                    description:
+                      8 half-dBm per-rate power limit values
+
+                  rates-mcs:
+                    $ref: /schemas/types.yaml#/definitions/uint8-matrix
+                    description:
+                      Sets of per-rate power limit values for 802.11n/802.11ac
+                      rates for multiple channel bandwidth settings.
+                      Each set starts with the number of channel bandwidth
+                      settings for which the rate set applies, followed by
+                      either 8 or 10 power limit values. The order of the
+                      channel bandwidth settings is 20, 40, 80 and 160 MHz.
+                    maxItems: 4
+                    items:
+                      minItems: 9
+                      maxItems: 11
+
+                  rates-ru:
+                    $ref: /schemas/types.yaml#/definitions/uint8-matrix
+                    description:
+                      Sets of per-rate power limit values for 802.11ax rates
+                      for multiple channel bandwidth or resource unit settings.
+                      Each set starts with the number of channel bandwidth or
+                      resource unit settings for which the rate set applies,
+                      followed by 12 power limit values. The order of the
+                      channel resource unit settings is RU26, RU52, RU106,
+                      RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160.
+                    items:
+                      minItems: 13
+                      maxItems: 13
+
+                  txs-delta:
+                    $ref: /schemas/types.yaml#/definitions/uint32-array
+                    description:
+                      Half-dBm power delta for different numbers of antennas
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pcie0 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      wifi@0,0 {
+        compatible = "mediatek,mt76";
+        reg = <0x0000 0 0 0 0>;
+        ieee80211-freq-limit = <5000000 6000000>;
+        mediatek,mtd-eeprom = <&factory 0x8000>;
+        big-endian;
+
+        led {
+          led-sources = <2>;
+        };
+
+        power-limits {
+          r0 {
+            regdomain = "FCC";
+            txpower-5g {
+               b0 {
+                   channels = <36 48>;
+                   rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
+                   rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
+                               /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
+                   rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
+                              /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
+               };
+               b1 {
+                   channels = <100 181>;
+                   rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
+                   rates-mcs = /bits/ 8  <4 14 14 14 14 14 14 14 14 14 14>;
+                   txs-delta = <12 9 6>;
+                   rates-ru = /bits/ 8  <7 14 14 14 14 14 14 14 14 14 14 14 14>;
+               };
+             };
+          };
+        };
+      };
+    };
+
+  - |
+    wifi@10300000 {
+      compatible = "mediatek,mt7628-wmac";
+      reg = <0x10300000 0x100000>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <6>;
+
+      mediatek,mtd-eeprom = <&factory 0x0>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    wifi@18000000 {
+      compatible = "mediatek,mt7622-wmac";
+      reg = <0x10300000 0x100000>;
+      interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+
+      mediatek,infracfg = <&infracfg>;
+
+      power-domains = <&scpsys 3>;
+    };
+
+  - |
+    wifi@18000000 {
+        compatible = "mediatek,mt7986-wmac";
+        resets = <&watchdog 23>;
+        reset-names = "consys";
+        reg = <0x18000000 0x1000000>,
+              <0x10003000 0x1000>,
+              <0x11d10000 0x1000>;
+        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&topckgen 50>,
+                 <&topckgen 62>;
+        clock-names = "mcu", "ap2conn";
+        memory-region = <&wmcpu_emi>;
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
new file mode 100644
index 000000000000..b3405f284580
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip WILC wireless devicetree bindings
+
+maintainers:
+  - Adham Abozaeid <adham.abozaeid@microchip.com>
+  - Ajay Singh <ajay.kathat@microchip.com>
+
+description:
+  The wilc1000 chips can be connected via SPI or SDIO. This document
+  describes the binding to connect wilc devices.
+
+properties:
+  compatible:
+    const: microchip,wilc1000
+
+  reg: true
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: phandle to the clock connected on rtc clock line.
+    maxItems: 1
+
+  clock-names:
+    const: rtc
+
+  enable-gpios:
+    maxItems: 1
+    description: Used by wilc1000-spi to determine the GPIO line
+      connected to the ENABLE line.  If specified, reset-gpios
+      must be specified as well as otherwise the driver cannot
+      ensure the timing required between asserting ENABLE
+      and deasserting RESET.  This should be declared as an
+      active-high signal.
+
+  reset-gpios:
+    maxItems: 1
+    description: Used by wilc1000-spi to determine the GPIO line
+      connected to the RESET line.  This should be declared as an
+      active-low signal.
+
+required:
+  - compatible
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      wifi@0 {
+        compatible = "microchip,wilc1000";
+        spi-max-frequency = <48000000>;
+        reg = <0>;
+        interrupt-parent = <&pioC>;
+        interrupts = <27 0>;
+        clocks = <&pck1>;
+        clock-names = "rtc";
+        enable-gpios = <&pioA 5 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+      };
+    };
+
+  - |
+    mmc {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+      non-removable;
+      vmmc-supply = <&vcc_mmc1_reg>;
+      vqmmc-supply = <&vcc_3v3_reg>;
+      bus-width = <4>;
+      wifi@0 {
+        compatible = "microchip,wilc1000";
+        reg = <0>;
+        interrupt-parent = <&pioC>;
+        interrupts = <27 0>;
+        clocks = <&pck1>;
+        clock-names = "rtc";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt
deleted file mode 100644
index aaaeeb5f935b..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Qualcomm Atheros ath9k wireless devices
-
-This node provides properties for configuring the ath9k wireless device. The
-node is expected to be specified as a child node of the PCI controller to
-which the wireless chip is connected.
-
-Required properties:
-- compatible: For PCI and PCIe devices this should be an identifier following
-		the format as defined in "PCI Bus Binding to Open Firmware"
-		Revision 2.1. One of the possible formats is "pciVVVV,DDDD"
-		where VVVV is the PCI vendor ID and DDDD is PCI device ID.
-		Typically QCA's PCI vendor ID 168c is used while the PCI device
-		ID depends on the chipset - see the following (possibly
-		incomplete) list:
-			- 0023 for AR5416
-			- 0024 for AR5418
-			- 0027 for AR9160
-			- 0029 for AR9220 and AR9223
-			- 002a for AR9280 and AR9283
-			- 002b for AR9285
-			- 002c for AR2427
-			- 002d for AR9227
-			- 002e for AR9287
-			- 0030 for AR9380, AR9381 and AR9382
-			- 0032 for AR9485
-			- 0033 for AR9580 and AR9590
-			- 0034 for AR9462
-			- 0036 for AR9565
-			- 0037 for AR9485
-- reg: Address and length of the register set for the device.
-
-Optional properties:
-- qca,no-eeprom: Indicates that there is no physical EEPROM connected to the
-			ath9k wireless chip (in this case the calibration /
-			EEPROM data will be loaded from userspace using the
-			kernel firmware loader).
-
-The MAC address will be determined using the optional properties defined in
-net/ethernet.txt.
-
-In this example, the node is defined as child node of the PCI controller:
-&pci0 {
-	wifi@168c,002d {
-		compatible = "pci168c,002d";
-		reg = <0x7000 0 0 0 0x1000>;
-		qca,no-eeprom;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
new file mode 100644
index 000000000000..7029cb1f38ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qca,ath9k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros ath9k wireless devices Generic Binding
+
+maintainers:
+  - Toke Høiland-Jørgensen <toke@toke.dk>
+
+description: |
+  This node provides properties for configuring the ath9k wireless device.
+  The node is expected to be specified as a child node of the PCI controller
+  to which the wireless chip is connected.
+
+allOf:
+  - $ref: ieee80211.yaml#
+
+properties:
+  compatible:
+    enum:
+      - pci168c,0023  # AR5416
+      - pci168c,0024  # AR5418
+      - pci168c,0027  # AR9160
+      - pci168c,0029  # AR9220 and AR9223
+      - pci168c,002a  # AR9280 and AR9283
+      - pci168c,002b  # AR9285
+      - pci168c,002c  # AR2427 - 802.11n bonded out
+      - pci168c,002d  # AR9227
+      - pci168c,002e  # AR9287
+      - pci168c,0030  # AR9380, AR9381 and AR9382
+      - pci168c,0032  # AR9485
+      - pci168c,0033  # AR9580 and AR9590
+      - pci168c,0034  # AR9462
+      - pci168c,0036  # AR9565
+      - pci168c,0037  # AR1111 and AR9485
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ieee80211-freq-limit: true
+
+  qca,no-eeprom:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates that there is no physical EEPROM connected
+
+  nvmem-cells:
+    items:
+      - description: Reference to an nvmem node for the MAC address
+      - description: Reference to an nvmem node for calibration data
+
+  nvmem-cell-names:
+    items:
+      - const: mac-address
+      - const: calibration
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie0 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      wifi@0,0 {
+        compatible = "pci168c,002d";
+        reg = <0 0 0 0 0>;
+        interrupts = <3>;
+        qca,no-eeprom;
+      };
+    };
+  - |
+    pci0 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      wifi@0,11 {
+        compatible = "pci168c,0029";
+        reg = <0x8800 0 0 0 0>;
+        nvmem-cells = <&macaddr_art_c>, <&cal_art_1000>;
+        nvmem-cell-names = "mac-address", "calibration";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 616c87746d6f..b61c2d5a0ff7 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -65,7 +65,8 @@ Optional properties:
 				     the length can vary between hw versions.
 - <supply-name>-supply: handle to the regulator device tree node
 			   optional "supply-name" are "vdd-0.8-cx-mx",
-			   "vdd-1.8-xo", "vdd-1.3-rfa" and "vdd-3.3-ch0".
+			   "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0",
+			   and "vdd-3.3-ch1".
 - memory-region:
 	Usage: optional
 	Value type: <phandle>
@@ -91,6 +92,22 @@ Optional properties:
 - qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically
 		       mapped msa region.
 
+- qcom,coexist-support : should contain eithr "0" or "1" to indicate coex
+			 support by the hardware.
+- qcom,coexist-gpio-pin : gpio pin number  information to support coex
+			  which will be used by wifi firmware.
+
+* Subnodes
+The ath10k wifi node can contain one optional firmware subnode.
+Firmware subnode is needed when the platform does not have TustZone.
+The firmware subnode must have:
+
+- iommus:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A list of phandle and IOMMU specifier pairs.
+
+
 Example (to supply PCI based wifi block details):
 
 In this example, the node is defined as child node of the PCI controller.
@@ -159,6 +176,8 @@ wifi0: wifi@a000000 {
 	qcom,msi_addr = <0x0b006040>;
 	qcom,msi_base = <0x40>;
 	qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ];
+	qcom,coexist-support = <1>;
+	qcom,coexist-gpio-pin = <0x33>;
 };
 
 Example (to supply wcn3990 SoC wifi block details):
@@ -186,7 +205,11 @@ wifi@18000000 {
 		vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 		vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 		vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+		vdd-3.3-ch1-supply = <&vreg_l26a_3p3>;
 		memory-region = <&wifi_msa_mem>;
 		iommus = <&apps_smmu 0x0040 0x1>;
 		qcom,msa-fixed-perm;
+		wifi-firmware {
+			iommus = <&apps_iommu 0xc22 0x1>;
+		};
 };
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index a1717db36dba..f7cf135aa37f 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -9,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies ath11k wireless devices Generic Binding
 
 maintainers:
-  - Kalle Valo <kvalo@codeaurora.org>
+  - Kalle Valo <kvalo@kernel.org>
 
 description: |
   These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax
@@ -17,124 +17,23 @@ description: |
 
 properties:
   compatible:
-    const: qcom,ipq8074-wifi
+    enum:
+      - qcom,ipq8074-wifi
+      - qcom,ipq6018-wifi
+      - qcom,wcn6750-wifi
 
   reg:
     maxItems: 1
 
   interrupts:
-    items:
-      - description: misc-pulse1 interrupt events
-      - description: misc-latch interrupt events
-      - description: sw exception interrupt events
-      - description: watchdog interrupt events
-      - description: interrupt event for ring CE0
-      - description: interrupt event for ring CE1
-      - description: interrupt event for ring CE2
-      - description: interrupt event for ring CE3
-      - description: interrupt event for ring CE4
-      - description: interrupt event for ring CE5
-      - description: interrupt event for ring CE6
-      - description: interrupt event for ring CE7
-      - description: interrupt event for ring CE8
-      - description: interrupt event for ring CE9
-      - description: interrupt event for ring CE10
-      - description: interrupt event for ring CE11
-      - description: interrupt event for ring host2wbm-desc-feed
-      - description: interrupt event for ring host2reo-re-injection
-      - description: interrupt event for ring host2reo-command
-      - description: interrupt event for ring host2rxdma-monitor-ring3
-      - description: interrupt event for ring host2rxdma-monitor-ring2
-      - description: interrupt event for ring host2rxdma-monitor-ring1
-      - description: interrupt event for ring reo2ost-exception
-      - description: interrupt event for ring wbm2host-rx-release
-      - description: interrupt event for ring reo2host-status
-      - description: interrupt event for ring reo2host-destination-ring4
-      - description: interrupt event for ring reo2host-destination-ring3
-      - description: interrupt event for ring reo2host-destination-ring2
-      - description: interrupt event for ring reo2host-destination-ring1
-      - description: interrupt event for ring rxdma2host-monitor-destination-mac3
-      - description: interrupt event for ring rxdma2host-monitor-destination-mac2
-      - description: interrupt event for ring rxdma2host-monitor-destination-mac1
-      - description: interrupt event for ring ppdu-end-interrupts-mac3
-      - description: interrupt event for ring ppdu-end-interrupts-mac2
-      - description: interrupt event for ring ppdu-end-interrupts-mac1
-      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
-      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
-      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
-      - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
-      - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
-      - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
-      - description: interrupt event for ring rxdma2host-destination-ring-mac3
-      - description: interrupt event for ring rxdma2host-destination-ring-mac2
-      - description: interrupt event for ring rxdma2host-destination-ring-mac1
-      - description: interrupt event for ring host2tcl-input-ring4
-      - description: interrupt event for ring host2tcl-input-ring3
-      - description: interrupt event for ring host2tcl-input-ring2
-      - description: interrupt event for ring host2tcl-input-ring1
-      - description: interrupt event for ring wbm2host-tx-completions-ring3
-      - description: interrupt event for ring wbm2host-tx-completions-ring2
-      - description: interrupt event for ring wbm2host-tx-completions-ring1
-      - description: interrupt event for ring tcl2host-status-ring
-
+    minItems: 32
+    maxItems: 52
 
   interrupt-names:
-    items:
-      - const: misc-pulse1
-      - const: misc-latch
-      - const: sw-exception
-      - const: watchdog
-      - const: ce0
-      - const: ce1
-      - const: ce2
-      - const: ce3
-      - const: ce4
-      - const: ce5
-      - const: ce6
-      - const: ce7
-      - const: ce8
-      - const: ce9
-      - const: ce10
-      - const: ce11
-      - const: host2wbm-desc-feed
-      - const: host2reo-re-injection
-      - const: host2reo-command
-      - const: host2rxdma-monitor-ring3
-      - const: host2rxdma-monitor-ring2
-      - const: host2rxdma-monitor-ring1
-      - const: reo2ost-exception
-      - const: wbm2host-rx-release
-      - const: reo2host-status
-      - const: reo2host-destination-ring4
-      - const: reo2host-destination-ring3
-      - const: reo2host-destination-ring2
-      - const: reo2host-destination-ring1
-      - const: rxdma2host-monitor-destination-mac3
-      - const: rxdma2host-monitor-destination-mac2
-      - const: rxdma2host-monitor-destination-mac1
-      - const: ppdu-end-interrupts-mac3
-      - const: ppdu-end-interrupts-mac2
-      - const: ppdu-end-interrupts-mac1
-      - const: rxdma2host-monitor-status-ring-mac3
-      - const: rxdma2host-monitor-status-ring-mac2
-      - const: rxdma2host-monitor-status-ring-mac1
-      - const: host2rxdma-host-buf-ring-mac3
-      - const: host2rxdma-host-buf-ring-mac2
-      - const: host2rxdma-host-buf-ring-mac1
-      - const: rxdma2host-destination-ring-mac3
-      - const: rxdma2host-destination-ring-mac2
-      - const: rxdma2host-destination-ring-mac1
-      - const: host2tcl-input-ring4
-      - const: host2tcl-input-ring3
-      - const: host2tcl-input-ring2
-      - const: host2tcl-input-ring1
-      - const: wbm2host-tx-completions-ring3
-      - const: wbm2host-tx-completions-ring2
-      - const: wbm2host-tx-completions-ring1
-      - const: tcl2host-status-ring
+    maxItems: 52
 
   qcom,rproc:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       DT entry of q6v5-wcss remoteproc driver.
       Phandle to a node that can contain the following properties
@@ -142,15 +41,224 @@ properties:
         * reg
         * reg-names
 
+  qcom,ath11k-calibration-variant:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      string to uniquely identify variant of the calibration data in the
+      board-2.bin for designs with colliding bus and device specific ids
+
+  memory-region:
+    minItems: 1
+    maxItems: 2
+    description:
+      phandle to a node describing reserved memory (System RAM memory)
+      used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt)
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  wifi-firmware:
+    type: object
+    description: |
+      WCN6750 wifi node can contain one optional firmware subnode.
+      Firmware subnode is needed when the platform does not have Trustzone.
+    required:
+      - iommus
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: State bits used by the AP to signal the WLAN Q6.
+    items:
+      - description: Signal bits used to enable/disable low power mode
+                     on WCN6750 in the case of WoW (Wake on Wireless).
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output.
+    items:
+      - const: wlan-smp2p-out
+
 required:
   - compatible
   - reg
   - interrupts
-  - interrupt-names
   - qcom,rproc
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-wifi
+              - qcom,ipq6018-wifi
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: misc-pulse1 interrupt events
+            - description: misc-latch interrupt events
+            - description: sw exception interrupt events
+            - description: watchdog interrupt events
+            - description: interrupt event for ring CE0
+            - description: interrupt event for ring CE1
+            - description: interrupt event for ring CE2
+            - description: interrupt event for ring CE3
+            - description: interrupt event for ring CE4
+            - description: interrupt event for ring CE5
+            - description: interrupt event for ring CE6
+            - description: interrupt event for ring CE7
+            - description: interrupt event for ring CE8
+            - description: interrupt event for ring CE9
+            - description: interrupt event for ring CE10
+            - description: interrupt event for ring CE11
+            - description: interrupt event for ring host2wbm-desc-feed
+            - description: interrupt event for ring host2reo-re-injection
+            - description: interrupt event for ring host2reo-command
+            - description: interrupt event for ring host2rxdma-monitor-ring3
+            - description: interrupt event for ring host2rxdma-monitor-ring2
+            - description: interrupt event for ring host2rxdma-monitor-ring1
+            - description: interrupt event for ring reo2ost-exception
+            - description: interrupt event for ring wbm2host-rx-release
+            - description: interrupt event for ring reo2host-status
+            - description: interrupt event for ring reo2host-destination-ring4
+            - description: interrupt event for ring reo2host-destination-ring3
+            - description: interrupt event for ring reo2host-destination-ring2
+            - description: interrupt event for ring reo2host-destination-ring1
+            - description: interrupt event for ring rxdma2host-monitor-destination-mac3
+            - description: interrupt event for ring rxdma2host-monitor-destination-mac2
+            - description: interrupt event for ring rxdma2host-monitor-destination-mac1
+            - description: interrupt event for ring ppdu-end-interrupts-mac3
+            - description: interrupt event for ring ppdu-end-interrupts-mac2
+            - description: interrupt event for ring ppdu-end-interrupts-mac1
+            - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
+            - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
+            - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
+            - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
+            - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
+            - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
+            - description: interrupt event for ring rxdma2host-destination-ring-mac3
+            - description: interrupt event for ring rxdma2host-destination-ring-mac2
+            - description: interrupt event for ring rxdma2host-destination-ring-mac1
+            - description: interrupt event for ring host2tcl-input-ring4
+            - description: interrupt event for ring host2tcl-input-ring3
+            - description: interrupt event for ring host2tcl-input-ring2
+            - description: interrupt event for ring host2tcl-input-ring1
+            - description: interrupt event for ring wbm2host-tx-completions-ring3
+            - description: interrupt event for ring wbm2host-tx-completions-ring2
+            - description: interrupt event for ring wbm2host-tx-completions-ring1
+            - description: interrupt event for ring tcl2host-status-ring
+        interrupt-names:
+          items:
+            - const: misc-pulse1
+            - const: misc-latch
+            - const: sw-exception
+            - const: watchdog
+            - const: ce0
+            - const: ce1
+            - const: ce2
+            - const: ce3
+            - const: ce4
+            - const: ce5
+            - const: ce6
+            - const: ce7
+            - const: ce8
+            - const: ce9
+            - const: ce10
+            - const: ce11
+            - const: host2wbm-desc-feed
+            - const: host2reo-re-injection
+            - const: host2reo-command
+            - const: host2rxdma-monitor-ring3
+            - const: host2rxdma-monitor-ring2
+            - const: host2rxdma-monitor-ring1
+            - const: reo2ost-exception
+            - const: wbm2host-rx-release
+            - const: reo2host-status
+            - const: reo2host-destination-ring4
+            - const: reo2host-destination-ring3
+            - const: reo2host-destination-ring2
+            - const: reo2host-destination-ring1
+            - const: rxdma2host-monitor-destination-mac3
+            - const: rxdma2host-monitor-destination-mac2
+            - const: rxdma2host-monitor-destination-mac1
+            - const: ppdu-end-interrupts-mac3
+            - const: ppdu-end-interrupts-mac2
+            - const: ppdu-end-interrupts-mac1
+            - const: rxdma2host-monitor-status-ring-mac3
+            - const: rxdma2host-monitor-status-ring-mac2
+            - const: rxdma2host-monitor-status-ring-mac1
+            - const: host2rxdma-host-buf-ring-mac3
+            - const: host2rxdma-host-buf-ring-mac2
+            - const: host2rxdma-host-buf-ring-mac1
+            - const: rxdma2host-destination-ring-mac3
+            - const: rxdma2host-destination-ring-mac2
+            - const: rxdma2host-destination-ring-mac1
+            - const: host2tcl-input-ring4
+            - const: host2tcl-input-ring3
+            - const: host2tcl-input-ring2
+            - const: host2tcl-input-ring1
+            - const: wbm2host-tx-completions-ring3
+            - const: wbm2host-tx-completions-ring2
+            - const: wbm2host-tx-completions-ring1
+            - const: tcl2host-status-ring
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-wifi
+              - qcom,ipq6018-wifi
+    then:
+      required:
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn6750-wifi
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: interrupt event for ring CE1
+            - description: interrupt event for ring CE2
+            - description: interrupt event for ring CE3
+            - description: interrupt event for ring CE4
+            - description: interrupt event for ring CE5
+            - description: interrupt event for ring CE6
+            - description: interrupt event for ring CE7
+            - description: interrupt event for ring CE8
+            - description: interrupt event for ring CE9
+            - description: interrupt event for ring CE10
+            - description: interrupt event for ring DP1
+            - description: interrupt event for ring DP2
+            - description: interrupt event for ring DP3
+            - description: interrupt event for ring DP4
+            - description: interrupt event for ring DP5
+            - description: interrupt event for ring DP6
+            - description: interrupt event for ring DP7
+            - description: interrupt event for ring DP8
+            - description: interrupt event for ring DP9
+            - description: interrupt event for ring DP10
+            - description: interrupt event for ring DP11
+            - description: interrupt event for ring DP12
+            - description: interrupt event for ring DP13
+            - description: interrupt event for ring DP14
+            - description: interrupt event for ring DP15
+            - description: interrupt event for ring DP16
+            - description: interrupt event for ring DP17
+            - description: interrupt event for ring DP18
+            - description: interrupt event for ring DP19
+            - description: interrupt event for ring DP20
+            - description: interrupt event for ring DP21
+            - description: interrupt event for ring DP22
+
 examples:
   - |
 
@@ -271,3 +379,90 @@ examples:
                           "tcl2host-status-ring";
         qcom,rproc = <&q6v5_wcss>;
     };
+
+  - |
+
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qcn9074_0: qcn9074_0@51100000 {
+            no-map;
+            reg = <0x0 0x51100000 0x0 0x03500000>;
+        };
+    };
+
+    pci {
+        pcie0 {
+            #size-cells = <2>;
+            #address-cells = <3>;
+
+            wifi_0: wifi@0 {
+                reg = <0 0 0 0 0>;
+                memory-region = <&qcn9074_0>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        wlan_ce_mem: memory@4cd000 {
+            no-map;
+            reg = <0x0 0x004cd000 0x0 0x1000>;
+        };
+
+        wlan_fw_mem: memory@80c00000 {
+            no-map;
+            reg = <0x0 0x80c00000 0x0 0xc00000>;
+        };
+    };
+
+    wifi: wifi@17a10040 {
+        compatible = "qcom,wcn6750-wifi";
+        reg = <0x17a10040 0x0>;
+        iommus = <&apps_smmu 0x1c00 0x1>;
+        interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>;
+        qcom,rproc = <&remoteproc_wpss>;
+        memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
+        qcom,smem-states = <&wlan_smp2p_out 0>;
+        qcom,smem-state-names = "wlan-smp2p-out";
+        wifi-firmware {
+                iommus = <&apps_smmu 0x1c02 0x1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
new file mode 100644
index 000000000000..b35d2f3ad1ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020, Silicon Laboratories, Inc.
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs WFxxx devicetree bindings
+
+maintainers:
+  - Jérôme Pouiller <jerome.pouiller@silabs.com>
+
+description: >
+  Support for the Wifi chip WFxxx from Silicon Labs. Currently, the only device
+  from the WFxxx series is the WF200 described here:
+     https://www.silabs.com/documents/public/data-sheets/wf200-datasheet.pdf
+
+  The WF200 can be connected via SPI or via SDIO.
+
+  For SDIO:
+
+    Declaring the WFxxx chip in device tree is mandatory (usually, the VID/PID is
+    sufficient for the SDIO devices).
+
+    It is recommended to declare a mmc-pwrseq on SDIO host above WFx. Without
+    it, you may encounter issues during reboot. The mmc-pwrseq should be
+    compatible with mmc-pwrseq-simple. Please consult
+    Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more
+    information.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - prt,prtt1c-wfm200 # Protonic PRTT1C Board
+          - silabs,brd4001a # WGM160P Evaluation Board
+          - silabs,brd8022a # WF200 Evaluation Board
+          - silabs,brd8023a # WFM200 Evaluation Board
+      - const: silabs,wf200 # Chip alone without antenna
+
+  reg:
+    description:
+      When used on SDIO bus, <reg> must be set to 1. When used on SPI bus, it is
+      the chip select address of the device as defined in the SPI devices
+      bindings.
+    maxItems: 1
+
+  interrupts:
+    description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is
+      used, this property is required. When SDIO is used, the "in-band"
+      interrupt provided by the SDIO bus is used unless an interrupt is defined
+      in the Device Tree.
+    maxItems: 1
+
+  reset-gpios:
+    description: (SPI only) Phandle of gpio that will be used to reset chip
+      during probe. Without this property, you may encounter issues with warm
+      boot.
+
+      For SDIO, the reset gpio should declared using a mmc-pwrseq.
+    maxItems: 1
+
+  wakeup-gpios:
+    description: Phandle of gpio that will be used to wake-up chip. Without this
+      property, driver will disable most of power saving features.
+    maxItems: 1
+
+  silabs,antenna-config-file:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Use an alternative file for antenna configuration (aka
+      "Platform Data Set" in Silabs jargon). Default depends of "compatible"
+      string. For "silabs,wf200", the default is 'wf200.pds'.
+
+  local-mac-address: true
+
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@0 {
+            compatible = "silabs,brd8022a", "silabs,wf200";
+            pinctrl-names = "default";
+            pinctrl-0 = <&wfx_irq &wfx_gpios>;
+            reg = <0>;
+            interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>;
+            wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+            spi-max-frequency = <42000000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    wfx_pwrseq: wfx_pwrseq {
+        compatible = "mmc-pwrseq-simple";
+        pinctrl-names = "default";
+        pinctrl-0 = <&wfx_reset>;
+        reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+    };
+
+    mmc {
+        mmc-pwrseq = <&wfx_pwrseq>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@1 {
+            compatible = "silabs,brd8022a", "silabs,wf200";
+            pinctrl-names = "default";
+            pinctrl-0 = <&wfx_wakeup>;
+            reg = <1>;
+            wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
index f38950560982..88fd28d15eac 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -9,11 +9,12 @@ Required properties:
 - spi-max-frequency : Maximum SPI clocking speed of device in Hz
 - interrupts :        Should contain interrupt line
 - vio-supply :        phandle to regulator providing VIO
-- ti,power-gpio :     GPIO connected to chip's PMEN pin
 
 Optional properties:
 - ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
                          provides configuration data (calibration, MAC, ...)
+- ti,power-gpio :	 GPIO connected to chip's PMEN pin if operated in
+			 SPI mode
 - Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
   for optional SPI connection related properties,
 
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
deleted file mode 100644
index cb5c9e1569ca..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-* Texas Instruments wl12xx/wl18xx wireless lan controller
-
-The wl12xx/wl18xx chips can be connected via SPI or via SDIO. This
-document describes the binding for the SPI connected chip.
-
-Required properties:
-- compatible :          Should be one of the following:
-    * "ti,wl1271"
-    * "ti,wl1273"
-    * "ti,wl1281"
-    * "ti,wl1283"
-    * "ti,wl1801"
-    * "ti,wl1805"
-    * "ti,wl1807"
-    * "ti,wl1831"
-    * "ti,wl1835"
-    * "ti,wl1837"
-- reg :                 Chip select address of device
-- spi-max-frequency :   Maximum SPI clocking speed of device in Hz
-- interrupts :          Should contain parameters for 1 interrupt line.
-- vwlan-supply :        Point the node of the regulator that powers/enable the
-                        wl12xx/wl18xx chip
-
-Optional properties:
-- ref-clock-frequency : Reference clock frequency (should be set for wl12xx)
-- clock-xtal :          boolean, clock is generated from XTAL
-
-- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
-  for optional SPI connection related properties,
-
-Examples:
-
-For wl12xx family:
-&spi1 {
-	wlcore: wlcore@1 {
-		compatible = "ti,wl1271";
-		reg = <1>;
-		spi-max-frequency = <48000000>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		vwlan-supply = <&vwlan_fixed>;
-		clock-xtal;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-For wl18xx family:
-&spi0 {
-	wlcore: wlcore@0 {
-		compatible = "ti,wl1835";
-		reg = <0>;
-		spi-max-frequency = <48000000>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 IRQ_TYPE_EDGE_RISING>;
-		vwlan-supply = <&vwlan_fixed>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
deleted file mode 100644
index 9306c4dadd46..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-TI Wilink 6/7/8 (wl12xx/wl18xx) SDIO devices
-
-This node provides properties for controlling the wilink wireless device. The
-node is expected to be specified as a child node to the SDIO controller that
-connects the device to the system.
-
-Required properties:
- - compatible: should be one of the following:
-    * "ti,wl1271"
-    * "ti,wl1273"
-    * "ti,wl1281"
-    * "ti,wl1283"
-    * "ti,wl1285"
-    * "ti,wl1801"
-    * "ti,wl1805"
-    * "ti,wl1807"
-    * "ti,wl1831"
-    * "ti,wl1835"
-    * "ti,wl1837"
- - interrupts : specifies attributes for the out-of-band interrupt.
-
-Optional properties:
- - ref-clock-frequency : ref clock frequency in Hz
- - tcxo-clock-frequency : tcxo clock frequency in Hz
-
-Note: the *-clock-frequency properties assume internal clocks. In case of external
-clock, new bindings (for parsing the clock nodes) have to be added.
-
-Example:
-
-&mmc3 {
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
new file mode 100644
index 000000000000..e31456730e9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/ti,wlcore.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Wilink 6/7/8 (wl12xx/wl18xx) Wireless LAN Controller
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  The wl12xx/wl18xx chips can be connected via SPI or via SDIO.
+  Note that the *-clock-frequency properties assume internal clocks.  In case
+  of external clocks, new bindings (for parsing the clock nodes) have to be
+  added.
+
+properties:
+  compatible:
+    enum:
+      - ti,wl1271
+      - ti,wl1273
+      - ti,wl1281
+      - ti,wl1283
+      - ti,wl1285
+      - ti,wl1801
+      - ti,wl1805
+      - ti,wl1807
+      - ti,wl1831
+      - ti,wl1835
+      - ti,wl1837
+
+  reg:
+    maxItems: 1
+    description:
+      This is required when connected via SPI, and optional when connected via
+      SDIO.
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: irq
+      - const: wakeup
+
+  vwlan-supply:
+    description:
+      Points to the node of the regulator that powers/enable the wl12xx/wl18xx
+      chip.  This is required when connected via SPI.
+
+
+  ref-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Reference clock frequency.
+
+  tcxo-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TCXO clock frequency.
+
+  clock-xtal:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Indicates that the clock is generated from XTAL.
+
+required:
+  - compatible
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,wl1271
+              - ti,wl1273
+              - ti,wl1281
+              - ti,wl1283
+    then:
+      required:
+        - ref-clock-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    // For wl12xx family:
+    spi1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            wlcore1: wlcore@1 {
+                    compatible = "ti,wl1271";
+                    reg = <1>;
+                    spi-max-frequency = <48000000>;
+                    interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+                    vwlan-supply = <&vwlan_fixed>;
+                    clock-xtal;
+                    ref-clock-frequency = <38400000>;
+            };
+    };
+
+    // For wl18xx family:
+    spi2 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            wlcore2: wlcore@0 {
+                    compatible = "ti,wl1835";
+                    reg = <0>;
+                    spi-max-frequency = <48000000>;
+                    interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+                    vwlan-supply = <&vwlan_fixed>;
+            };
+    };
+
+    // SDIO example:
+    mmc3 {
+            vmmc-supply = <&wlan_en_reg>;
+            bus-width = <4>;
+            cap-power-off-card;
+            keep-power-in-suspend;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            wlcore3: wlcore@2 {
+                    compatible = "ti,wl1835";
+                    reg = <2>;
+                    interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
index 7360617cdedb..1aa4c6006cd0 100644
--- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt
+++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
@@ -26,7 +26,8 @@ Required properties:
 		  specified, the TX/RX DMA interrupts should be on that node
 		  instead, and only the Ethernet core interrupt is optionally
 		  specified here.
-- phy-handle	: Should point to the external phy device.
+- phy-handle	: Should point to the external phy device if exists. Pointing
+		  this to the PCS/PMA PHY is deprecated and should be avoided.
 		  See ethernet.txt file in the same directory.
 - xlnx,rxmem	: Set to allocated memory buffer for Rx/Tx in the hardware
 
@@ -38,11 +39,27 @@ Optional properties:
 		  1 to enable partial TX checksum offload,
 		  2 to enable full TX checksum offload
 - xlnx,rxcsum	: Same values as xlnx,txcsum but for RX checksum offload
-- clocks	: AXI bus clock for the device. Refer to common clock bindings.
-		  Used to calculate MDIO clock divisor. If not specified, it is
-		  auto-detected from the CPU clock (but only on platforms where
-		  this is possible). New device trees should specify this - the
-		  auto detection is only for backward compatibility.
+- xlnx,switch-x-sgmii : Boolean to indicate the Ethernet core is configured to
+		  support both 1000BaseX and SGMII modes. If set, the phy-mode
+		  should be set to match the mode selected on core reset (i.e.
+		  by the basex_or_sgmii core input line).
+- clock-names: 	  Tuple listing input clock names. Possible clocks:
+		  s_axi_lite_clk: Clock for AXI register slave interface
+		  axis_clk: AXI4-Stream clock for TXD RXD TXC and RXS interfaces
+		  ref_clk: Ethernet reference clock, used by signal delay
+			   primitives and transceivers
+		  mgt_clk: MGT reference clock (used by optional internal
+			   PCS/PMA PHY)
+
+		  Note that if s_axi_lite_clk is not specified by name, the
+		  first clock of any name is used for this. If that is also not
+		  specified, the clock rate is auto-detected from the CPU clock
+		  (but only on platforms where this is possible). New device
+		  trees should specify all applicable clocks by name - the
+		  fallbacks to an unnamed clock or to CPU clock are only for
+		  backward compatibility.
+- clocks: 	  Phandles to input clocks matching clock-names. Refer to common
+		  clock bindings.
 - axistream-connected: Reference to another node which contains the resources
 		       for the AXI DMA controller used by this device.
 		       If this is specified, the DMA-related resources from that
@@ -52,13 +69,19 @@ Optional properties:
 		  required through the core's MDIO interface (i.e. always,
 		  unless the PHY is accessed through a different bus).
 
+ - pcs-handle: 	  Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X
+		  modes, where "pcs-handle" should be used to point
+		  to the PCS/PMA PHY, and "phy-handle" should point to an
+		  external PHY if exists.
+
 Example:
 	axi_ethernet_eth: ethernet@40c00000 {
 		compatible = "xlnx,axi-ethernet-1.00.a";
 		device_type = "network";
 		interrupt-parent = <&microblaze_0_axi_intc>;
 		interrupts = <2 0 1>;
-		clocks = <&axi_clk>;
+		clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk";
+		clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
 		phy-mode = "mii";
 		reg = <0x40c00000 0x40000 0x50c00000 0x40000>;
 		xlnx,rxcsum = <0x2>;
diff --git a/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
new file mode 100644
index 000000000000..92d8ade988f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/xlnx,emaclite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Emaclite Ethernet controller
+
+maintainers:
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
+  - Harini Katakam <harini.katakam@amd.com>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,opb-ethernetlite-1.01.a
+      - xlnx,opb-ethernetlite-1.01.b
+      - xlnx,xps-ethernetlite-1.00.a
+      - xlnx,xps-ethernetlite-2.00.a
+      - xlnx,xps-ethernetlite-2.01.a
+      - xlnx,xps-ethernetlite-3.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phy-handle: true
+
+  local-mac-address: true
+
+  xlnx,tx-ping-pong:
+    type: boolean
+    description: hardware supports tx ping pong buffer.
+
+  xlnx,rx-ping-pong:
+    type: boolean
+    description: hardware supports rx ping pong buffer.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy-handle
+
+additionalProperties: false
+
+examples:
+  - |
+    axi_ethernetlite_1: ethernet@40e00000 {
+        compatible = "xlnx,xps-ethernetlite-3.00.a";
+        reg = <0x40e00000 0x10000>;
+        interrupt-parent = <&axi_intc_1>;
+        interrupts = <1>;
+        local-mac-address = [00 00 00 00 00 00];
+        phy-handle = <&phy0>;
+        xlnx,rx-ping-pong;
+        xlnx,tx-ping-pong;
+    };
diff --git a/Documentation/devicetree/bindings/numa.txt b/Documentation/devicetree/bindings/numa.txt
index 21b35053ca5a..42f282c2f3cc 100644
--- a/Documentation/devicetree/bindings/numa.txt
+++ b/Documentation/devicetree/bindings/numa.txt
@@ -103,7 +103,51 @@ Example:
 		};
 
 ==============================================================================
-4 - Example dts
+4 - Empty memory nodes
+==============================================================================
+
+Empty memory nodes, which no memory resides in, are allowed. There are no
+device nodes for these empty memory nodes. However, the NUMA node IDs and
+distance maps are still valid and memory may be added into them through
+hotplug afterwards.
+
+Example:
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+		numa-node-id = <0>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+		numa-node-id = <1>;
+	};
+
+	/* Empty memory node 2 and 3 */
+	distance-map {
+		compatible = "numa-distance-map-v1";
+		distance-matrix = <0 0  10>,
+				  <0 1  20>,
+				  <0 2  40>,
+				  <0 3  20>,
+				  <1 0  20>,
+				  <1 1  10>,
+				  <1 2  20>,
+				  <1 3  40>,
+				  <2 0  40>,
+				  <2 1  20>,
+				  <2 2  10>,
+				  <2 3  20>,
+				  <3 0  20>,
+				  <3 1  40>,
+				  <3 2  20>,
+				  <3 3  10>;
+	};
+
+==============================================================================
+5 - Example dts
 ==============================================================================
 
 Dual socket system consists of 2 boards connected through ccn bus and
diff --git a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
new file mode 100644
index 000000000000..34dd1cc67124
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvme/apple,nvme-ans.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple ANS NVM Express host controller
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-nvme-ans2
+          - apple,t6000-nvme-ans2
+      - const: apple,nvme-ans2
+
+  reg:
+    items:
+      - description: NVMe and NVMMU registers
+      - description: ANS2 co-processor control registers
+
+  reg-names:
+    items:
+      - const: nvme
+      - const: ans
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    # two domains for t8103, three for t6000
+    minItems: 2
+    items:
+      - description: power domain for the NVMe controller.
+      - description: power domain for the first PCIe bus connecting the NVMe
+          controller to the storage modules.
+      - description: optional power domain for the second PCIe bus
+          connecting the NVMe controller to the storage modules.
+
+  power-domain-names:
+    minItems: 2
+    items:
+      - const: ans
+      - const: apcie0
+      - const: apcie1
+
+  mboxes:
+    maxItems: 1
+    description: Mailbox of the ANS2 co-processor
+
+  interrupts:
+    maxItems: 1
+
+  apple,sart:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Reference to the SART address filter.
+
+      The SART address filter is documented in iommu/apple,sart.yaml.
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: apple,t8103-nvme-ans2
+then:
+  properties:
+    power-domains:
+      maxItems: 2
+    power-domain-names:
+      maxItems: 2
+else:
+  properties:
+    power-domains:
+      minItems: 3
+    power-domain-names:
+      minItems: 3
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - resets
+  - power-domains
+  - power-domain-names
+  - mboxes
+  - interrupts
+  - apple,sart
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    nvme@7bcc0000 {
+      compatible = "apple,t8103-nvme-ans2", "apple,nvme-ans2";
+      reg = <0x7bcc0000 0x40000>, <0x77400000 0x4000>;
+      reg-names = "nvme", "ans";
+      interrupts = <AIC_IRQ 590 IRQ_TYPE_LEVEL_HIGH>;
+      mboxes = <&ans>;
+      apple,sart = <&sart>;
+      power-domains = <&ps_ans2>, <&ps_apcie_st>;
+      power-domain-names = "ans", "apcie0";
+      resets = <&ps_ans2>;
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
index daf1321d76ad..14c170c6a86e 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/allwinner,sun4i-a10-sid.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Security ID Device Tree Bindings
+title: Allwinner A10 Security ID
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -15,14 +15,18 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - allwinner,sun4i-a10-sid
-      - allwinner,sun7i-a20-sid
-      - allwinner,sun8i-a83t-sid
-      - allwinner,sun8i-h3-sid
-      - allwinner,sun50i-a64-sid
-      - allwinner,sun50i-h5-sid
-      - allwinner,sun50i-h6-sid
+    oneOf:
+      - const: allwinner,sun4i-a10-sid
+      - const: allwinner,sun7i-a20-sid
+      - const: allwinner,sun8i-a83t-sid
+      - const: allwinner,sun8i-h3-sid
+      - const: allwinner,sun20i-d1-sid
+      - const: allwinner,sun50i-a64-sid
+      - items:
+          - const: allwinner,sun50i-a100-sid
+          - const: allwinner,sun50i-a64-sid
+      - const: allwinner,sun50i-h5-sid
+      - const: allwinner,sun50i-h6-sid
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
new file mode 100644
index 000000000000..5ec8f2bdb3a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/apple,efuses.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC eFuse-based NVMEM
+
+description: |
+  Apple SoCs such as the M1 contain factory-programmed eFuses used to e.g. store
+  calibration data for the PCIe and the Type-C PHY or unique chip identifiers
+  such as the ECID.
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-efuses
+          - apple,t6000-efuses
+      - const: apple,efuses
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse@3d2bc000 {
+        compatible = "apple,t8103-efuses", "apple,efuses";
+        reg = <0x3d2bc000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ecid: efuse@500 {
+            reg = <0x500 0x8>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
new file mode 100644
index 000000000000..25033de3ef6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/brcm,nvram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's NVRAM
+
+description: |
+  Broadcom's NVRAM is a structure containing device specific environment
+  variables. It is used for storing device configuration, booting parameters
+  and calibration data.
+
+  NVRAM can be accessed on Broadcom BCM47xx MIPS and Northstar ARM Cortex-A9
+  devices usiong I/O mapped memory.
+
+  NVRAM variables can be defined as NVMEM device subnodes.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    const: brcm,nvram
+
+  reg:
+    maxItems: 1
+
+  board_id:
+    type: object
+    description: Board identification name
+
+  et0macaddr:
+    type: object
+    description: First Ethernet interface's MAC address
+
+  et1macaddr:
+    type: object
+    description: Second Ethernet interface's MAC address
+
+  et2macaddr:
+    type: object
+    description: Third Ethernet interface's MAC address
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nvram@1eff0000 {
+        compatible = "brcm,nvram";
+        reg = <0x1eff0000 0x10000>;
+
+        mac: et0macaddr {
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
new file mode 100644
index 000000000000..3b4e6e94cb81
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/fsl,layerscape-sfp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Security Fuse Processor
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  SFP is the security fuse processor which among other things provides a
+  unique identifier per part.
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - description: Trust architecture 2.1 SFP
+        items:
+          - const: fsl,ls1021a-sfp
+      - description: Trust architecture 3.0 SFP
+        items:
+          - const: fsl,ls1028a-sfp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      The SFP clock. Typically, this is the platform clock divided by 4.
+
+  clock-names:
+    const: sfp
+
+  ta-prog-sfp-supply:
+    description:
+      The regulator for the TA_PROG_SFP pin. It will be enabled for programming
+      and disabled for reading.
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+    efuse@1e80000 {
+        compatible = "fsl,ls1028a-sfp";
+        reg = <0x1e80000 0x8000>;
+        clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+                            QORIQ_CLK_PLL_DIV(4)>;
+        clock-names = "sfp";
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml
new file mode 100644
index 000000000000..682688299b26
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/fsl,scu-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - OCOTP bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-scu-ocotp
+      - fsl,imx8qxp-scu-ocotp
+
+patternProperties:
+  '^mac@[0-9a-f]*$':
+    type: object
+    description:
+      MAC address.
+
+    properties:
+      reg:
+        description:
+          Byte offset within OCOTP where the MAC address is stored
+        maxItems: 1
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ocotp {
+        compatible = "fsl,imx8qxp-scu-ocotp";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        fec_mac0: mac@2c4 {
+            reg = <0x2c4 6>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.txt b/Documentation/devicetree/bindings/nvmem/imx-iim.txt
deleted file mode 100644
index 1978c5bcd96d..000000000000
--- a/Documentation/devicetree/bindings/nvmem/imx-iim.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Freescale i.MX IC Identification Module (IIM) device tree bindings
-
-This binding represents the IC Identification Module (IIM) found on
-i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs.
-
-Required properties:
-- compatible: should be one of
-	"fsl,imx25-iim", "fsl,imx27-iim",
-	"fsl,imx31-iim", "fsl,imx35-iim",
-	"fsl,imx51-iim", "fsl,imx53-iim",
-- reg: Should contain the register base and length.
-- interrupts: Should contain the interrupt for the IIM
-- clocks: Should contain a phandle pointing to the gated peripheral clock.
-
-Example:
-
-	iim: iim@63f98000 {
-		compatible = "fsl,imx53-iim", "fsl,imx27-iim";
-		reg = <0x63f98000 0x4000>;
-		interrupts = <69>;
-                clocks = <&clks IMX5_CLK_IIM_GATE>;
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml
new file mode 100644
index 000000000000..7aac1995cfaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/imx-iim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX IC Identification Module (IIM)
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  This binding represents the IC Identification Module (IIM) found on
+  i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs.
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx25-iim
+      - fsl,imx27-iim
+      - fsl,imx31-iim
+      - fsl,imx35-iim
+      - fsl,imx51-iim
+      - fsl,imx53-iim
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    iim: efuse@63f98000 {
+        compatible = "fsl,imx53-iim";
+        reg = <0x63f98000 0x4000>;
+        interrupts = <69>;
+        clocks = <&clks IMX5_CLK_IIM_GATE>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
deleted file mode 100644
index 6e346d5cddcf..000000000000
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings
-
-This binding represents the on-chip eFuse OTP controller found on
-i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL,
-i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs.
-
-Required properties:
-- compatible: should be one of
-	"fsl,imx6q-ocotp" (i.MX6Q/D/DL/S),
-	"fsl,imx6sl-ocotp" (i.MX6SL), or
-	"fsl,imx6sx-ocotp" (i.MX6SX),
-	"fsl,imx6ul-ocotp" (i.MX6UL),
-	"fsl,imx6ull-ocotp" (i.MX6ULL/ULZ),
-	"fsl,imx7d-ocotp" (i.MX7D/S),
-	"fsl,imx6sll-ocotp" (i.MX6SLL),
-	"fsl,imx7ulp-ocotp" (i.MX7ULP),
-	"fsl,imx8mq-ocotp" (i.MX8MQ),
-	"fsl,imx8mm-ocotp" (i.MX8MM),
-	"fsl,imx8mn-ocotp" (i.MX8MN),
-	"fsl,imx8mp-ocotp" (i.MX8MP),
-	followed by "syscon".
-- #address-cells : Should be 1
-- #size-cells : Should be 1
-- reg: Should contain the register base and length.
-- clocks: Should contain a phandle pointing to the gated peripheral clock.
-
-Optional properties:
-- read-only: disable write access
-
-Optional Child nodes:
-
-- Data cells of ocotp:
-  Detailed bindings are described in bindings/nvmem/nvmem.txt
-
-Example:
-	ocotp: ocotp@21bc000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,imx6sx-ocotp", "syscon";
-		reg = <0x021bc000 0x4000>;
-		clocks = <&clks IMX6SX_CLK_OCOTP>;
-
-		tempmon_calib: calib@38 {
-			reg = <0x38 4>;
-		};
-
-		tempmon_temp_grade: temp-grade@20 {
-			reg = <0x20 4>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
new file mode 100644
index 000000000000..d0a239d7e199
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/imx-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 On-Chip OTP Controller (OCOTP)
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  This binding represents the on-chip eFuse OTP controller found on
+  i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL,
+  i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs.
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6q-ocotp
+              - fsl,imx6sl-ocotp
+              - fsl,imx6sx-ocotp
+              - fsl,imx6ul-ocotp
+              - fsl,imx6ull-ocotp
+              - fsl,imx7d-ocotp
+              - fsl,imx6sll-ocotp
+              - fsl,imx7ulp-ocotp
+              - fsl,imx8mq-ocotp
+              - fsl,imx8mm-ocotp
+          - const: syscon
+      - items:
+          - enum:
+              - fsl,imx8mn-ocotp
+              # i.MX8MP not really compatible with fsl,imx8mm-ocotp, however
+              # the code for getting SoC revision depends on fsl,imx8mm-ocotp
+              # compatible.
+              - fsl,imx8mp-ocotp
+          - const: fsl,imx8mm-ocotp
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+
+    properties:
+      reg:
+        maxItems: 1
+        description:
+          Offset and size in bytes within the storage device.
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6sx-clock.h>
+
+    ocotp: efuse@21bc000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "fsl,imx6sx-ocotp", "syscon";
+        reg = <0x021bc000 0x4000>;
+        clocks = <&clks IMX6SX_CLK_OCOTP>;
+
+        cpu_speed_grade: speed-grade@10 {
+            reg = <0x10 4>;
+        };
+
+        tempmon_calib: calib@38 {
+            reg = <0x38 4>;
+        };
+
+        tempmon_temp_grade: temp-grade@20 {
+            reg = <0x20 4>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
new file mode 100644
index 000000000000..bf84768228f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/ingenic,jz4780-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ EFUSE driver bindings
+
+maintainers:
+  - PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4780-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    # Handle for the ahb for the efuse.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    efuse@134100d0 {
+        compatible = "ingenic,jz4780-efuse";
+        reg = <0x134100d0 0x2c>;
+
+        clocks = <&cgu JZ4780_CLK_AHB2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
new file mode 100644
index 000000000000..75e0a516e59a
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/mediatek,efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek efuse
+
+description: |
+  MediaTek's efuse is used for storing calibration data, it can be accessed
+  on ARM devices usiong I/O mapped memory.
+
+maintainers:
+  - Andrew-CT Chen <andrew-ct.chen@mediatek.com>
+  - Lala Lin <lala.lin@mediatek.com>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  $nodename:
+    pattern: "^efuse@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7622-efuse
+              - mediatek,mt7623-efuse
+              - mediatek,mt8173-efuse
+              - mediatek,mt8183-efuse
+              - mediatek,mt8186-efuse
+              - mediatek,mt8188-efuse
+              - mediatek,mt8192-efuse
+              - mediatek,mt8195-efuse
+              - mediatek,mt8516-efuse
+          - const: mediatek,efuse
+      - const: mediatek,mt8173-efuse
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse@11c10000 {
+        compatible = "mediatek,mt8195-efuse", "mediatek,efuse";
+        reg = <0x11c10000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        u3_tx_imp_p0: usb3-tx-imp@184,1 {
+            reg = <0x184 0x1>;
+            bits = <0 5>;
+        };
+        u3_rx_imp_p0: usb3-rx-imp@184,2 {
+            reg = <0x184 0x2>;
+            bits = <5 5>;
+        };
+        u3_intr_p0: usb3-intr@185 {
+            reg = <0x185 0x1>;
+            bits = <2 6>;
+        };
+        comb_tx_imp_p1: usb3-tx-imp@186,1 {
+            reg = <0x186 0x1>;
+            bits = <0 5>;
+        };
+        comb_rx_imp_p1: usb3-rx-imp@186,2 {
+            reg = <0x186 0x2>;
+            bits = <5 5>;
+        };
+        comb_intr_p1: usb3-intr@187 {
+            reg = <0x187 0x1>;
+            bits = <2 6>;
+        };
+        u2_intr_p0: usb2-intr-p0@188,1 {
+            reg = <0x188 0x1>;
+            bits = <0 5>;
+        };
+        u2_intr_p1: usb2-intr-p1@188,2 {
+            reg = <0x188 0x2>;
+            bits = <5 5>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml
new file mode 100644
index 000000000000..f97c6beb4766
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/microchip,lan9662-otpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN9662 OTP Controller (OTPC)
+
+maintainers:
+  - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+  OTP controller drives a NVMEM memory where system specific data
+  (e.g. hardware configuration settings, chip identifiers) or
+  user specific data could be stored.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,lan9668-otpc
+          - const: microchip,lan9662-otpc
+      - enum:
+          - microchip,lan9662-otpc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    otpc: otp@e0021000 {
+        compatible = "microchip,lan9662-otpc";
+        reg = <0xe0021000 0x300>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
new file mode 100644
index 000000000000..c3c96fd0baac
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/microchip,sama7g5-otpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip SAMA7G5 OTP Controller (OTPC)
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  OTP controller drives a NVMEM memory where system specific data
+  (e.g. calibration data for analog cells, hardware configuration
+  settings, chip identifiers) or user specific data could be stored.
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    items:
+      - const: microchip,sama7g5-otpc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
+
+    otpc: efuse@e8c00000 {
+        compatible = "microchip,sama7g5-otpc", "syscon";
+        reg = <0xe8c00000 0xec>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        temperature_calib: calib@1 {
+            reg = <OTP_PKT(1) 76>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
deleted file mode 100644
index 0668c45a156d..000000000000
--- a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-= Mediatek MTK-EFUSE device tree bindings =
-
-This binding is intended to represent MTK-EFUSE which is found in most Mediatek SOCs.
-
-Required properties:
-- compatible: should be
-	      "mediatek,mt7622-efuse", "mediatek,efuse": for MT7622
-	      "mediatek,mt7623-efuse", "mediatek,efuse": for MT7623
-	      "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173
-- reg: Should contain registers location and length
-
-= Data cells =
-Are child nodes of MTK-EFUSE, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example:
-
-	efuse: efuse@10206000 {
-		compatible = "mediatek,mt8173-efuse";
-		reg	   = <0 0x10206000 0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* Data cells */
-		thermal_calibration: calib@528 {
-			reg = <0x528 0xc>;
-		};
-	};
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-For example:
-
-	thermal {
-		...
-		nvmem-cells = <&thermal_calibration>;
-		nvmem-cell-names = "calibration";
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt
deleted file mode 100644
index 372c72fd64dc..000000000000
--- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-On-Chip OTP Memory for Freescale i.MX23/i.MX28
-
-Required properties :
-- compatible :
-  - "fsl,imx23-ocotp" for i.MX23
-  - "fsl,imx28-ocotp" for i.MX28
-- #address-cells : Should be 1
-- #size-cells : Should be 1
-- reg : Address and length of OTP controller registers
-- clocks : Should contain a reference to the hbus clock
-
-= Data cells =
-Are child nodes of mxs-ocotp, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example for i.MX28:
-
-	ocotp: ocotp@8002c000 {
-		compatible = "fsl,imx28-ocotp", "fsl,ocotp";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x8002c000 0x2000>;
-		clocks = <&clks 25>;
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
new file mode 100644
index 000000000000..ff317fd7c15b
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/mxs-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: On-Chip OTP Memory for Freescale i.MX23/i.MX28
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-ocotp
+      - fsl,imx28-ocotp
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    ocotp: efuse@8002c000 {
+        compatible = "fsl,imx28-ocotp";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x8002c000 0x2000>;
+        clocks = <&clks 25>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml
new file mode 100644
index 000000000000..f93bc50c40d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/nintendo-otp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nintendo Wii and Wii U OTP
+
+description: |
+  This binding represents the OTP memory as found on a Nintendo Wii or Wii U,
+  which contains common and per-console keys, signatures and related data
+  required to access peripherals.
+
+  See https://wiiubrew.org/wiki/Hardware/OTP
+
+maintainers:
+  - Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - nintendo,hollywood-otp
+      - nintendo,latte-otp
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    otp@d8001ec {
+        compatible = "nintendo,latte-otp";
+        reg = <0x0d8001ec 0x8>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
index b7c00ed31085..a26633bf52db 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
@@ -2,9 +2,9 @@
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/nvmem/nvmem-consumer.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
+$schema: http://devicetree.org/meta-schemas/base.yaml#
 
-title: NVMEM (Non Volatile Memory) Consumer Device Tree Bindings
+title: NVMEM (Non Volatile Memory) Consumer
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -23,12 +23,10 @@ properties:
       List of phandle to the nvmem data cells.
 
   nvmem-names:
-    $ref: /schemas/types.yaml#/definitions/string-array
     description:
       Names for the each nvmem provider.
 
   nvmem-cell-names:
-    $ref: /schemas/types.yaml#/definitions/string-array
     description:
       Names for each nvmem-cells specified.
 
@@ -36,6 +34,8 @@ dependencies:
   nvmem-names: [ nvmem ]
   nvmem-cell-names: [ nvmem-cells ]
 
+additionalProperties: true
+
 examples:
   - |
     tsens {
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
index 65980224d550..1eb22dba364c 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/nvmem.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NVMEM (Non Volatile Memory) Device Tree Bindings
+title: NVMEM (Non Volatile Memory)
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -20,9 +20,6 @@ description: |
   storage device.
 
 properties:
-  $nodename:
-    pattern: "^(eeprom|efuse|nvram)(@.*|-[0-9a-f])*$"
-
   "#address-cells":
     const: 1
 
@@ -43,7 +40,7 @@ properties:
     maxItems: 1
 
 patternProperties:
-  "^.*@[0-9a-f]+$":
+  "@[0-9a-f]+(,[0-7])?$":
     type: object
 
     properties:
@@ -53,21 +50,17 @@ patternProperties:
           Offset and size in bytes within the storage device.
 
       bits:
-        maxItems: 1
+        $ref: /schemas/types.yaml#/definitions/uint32-array
         items:
-          items:
-            - minimum: 0
-              maximum: 7
-              description:
-                Offset in bit within the address range specified by reg.
-            - minimum: 1
-              description:
-                Size in bit within the address range specified by reg.
-
-    required:
-      - reg
-
-    additionalProperties: false
+          - minimum: 0
+            maximum: 7
+            description:
+              Offset in bit within the address range specified by reg.
+          - minimum: 1
+            description:
+              Size in bit within the address range specified by reg.
+
+additionalProperties: true
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
new file mode 100644
index 000000000000..2eab2f46cb65
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/qcom,qfprom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc, QFPROM Efuse bindings
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,apq8064-qfprom
+          - qcom,apq8084-qfprom
+          - qcom,ipq8064-qfprom
+          - qcom,msm8974-qfprom
+          - qcom,msm8916-qfprom
+          - qcom,msm8996-qfprom
+          - qcom,msm8998-qfprom
+          - qcom,qcs404-qfprom
+          - qcom,sc7180-qfprom
+          - qcom,sc7280-qfprom
+          - qcom,sdm630-qfprom
+          - qcom,sdm845-qfprom
+          - qcom,sm6115-qfprom
+      - const: qcom,qfprom
+
+  reg:
+    # If the QFPROM is read-only OS image then only the corrected region
+    # needs to be provided.  If the QFPROM is writable then all 4 regions
+    # must be provided.
+    oneOf:
+      - items:
+          - description: The corrected region.
+      - items:
+          - description: The corrected region.
+          - description: The raw region.
+          - description: The config region.
+          - description: The security control region.
+
+  # Clock must be provided if QFPROM is writable from the OS image.
+  clocks:
+    maxItems: 1
+  clock-names:
+    const: core
+
+  # Supply reference must be provided if QFPROM is writable from the OS image.
+  vcc-supply:
+    description: Our power supply.
+
+  power-domains:
+    maxItems: 1
+
+  # Needed if any child nodes are present.
+  "#address-cells":
+    const: 1
+  "#size-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      efuse@784000 {
+        compatible = "qcom,sc7180-qfprom", "qcom,qfprom";
+        reg = <0 0x00784000 0 0x8ff>,
+              <0 0x00780000 0 0x7a0>,
+              <0 0x00782000 0 0x100>,
+              <0 0x00786000 0 0x1fff>;
+        clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+        clock-names = "core";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        vcc-supply = <&vreg_l11a_1p8>;
+
+        hstx-trim-primary@25b {
+          reg = <0x25b 0x1>;
+          bits = <1 3>;
+        };
+      };
+    };
+
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      efuse@784000 {
+        compatible = "qcom,sdm845-qfprom", "qcom,qfprom";
+        reg = <0 0x00784000 0 0x8ff>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        hstx-trim-primary@1eb {
+          reg = <0x1eb 0x1>;
+          bits = <1 4>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
index 7bbd4e62044e..ee79e13b5fe0 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
@@ -38,33 +38,7 @@ required:
   - reg
   - ranges
 
-patternProperties:
-  "^.*@[0-9a-f]+$":
-    type: object
-
-    properties:
-      reg:
-        maxItems: 1
-        description:
-          Offset and size in bytes within the storage device.
-
-      bits:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        maxItems: 1
-        items:
-          items:
-            - minimum: 0
-              maximum: 7
-              description:
-                Offset in bit within the address range specified by reg.
-            - minimum: 1
-              description:
-                Size in bit within the address range specified by reg.
-
-    required:
-      - reg
-
-    additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt
deleted file mode 100644
index 26fe878d5c86..000000000000
--- a/Documentation/devicetree/bindings/nvmem/qfprom.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-= Qualcomm QFPROM device tree bindings =
-
-This binding is intended to represent QFPROM which is found in most QCOM SOCs.
-
-Required properties:
-- compatible: should be "qcom,qfprom"
-- reg: Should contain registers location and length
-
-= Data cells =
-Are child nodes of qfprom, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example:
-
-	qfprom: qfprom@700000 {
-		compatible 	= "qcom,qfprom";
-		reg		= <0x00700000 0x8000>;
-		...
-		/* Data cells */
-		tsens_calibration: calib@404 {
-			reg = <0x4404 0x10>;
-		};
-	};
-
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-For example:
-
-	tsens {
-		...
-		nvmem-cells = <&tsens_calibration>;
-		nvmem-cell-names = "calibration";
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml
new file mode 100644
index 000000000000..a4a755dcfc43
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/rmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Reserved Memory Based nvmem Device
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - raspberrypi,bootloader-config
+      - const: nvmem-rmem
+
+  reg:
+    maxItems: 1
+
+  no-map:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Avoid creating a virtual mapping of the region as part of the OS'
+      standard mapping of system memory.
+
+required:
+  - compatible
+  - no-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+        reserved-memory {
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                blconfig: nvram@10000000 {
+                        compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        reg = <0x10000000 0x1000>;
+                        no-map;
+                };
+        };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
deleted file mode 100644
index 265bdb7dc8aa..000000000000
--- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-= Rockchip eFuse device tree bindings =
-
-Required properties:
-- compatible: Should be one of the following.
-  - "rockchip,rk3066a-efuse" - for RK3066a SoCs.
-  - "rockchip,rk3188-efuse" - for RK3188 SoCs.
-  - "rockchip,rk3228-efuse" - for RK3228 SoCs.
-  - "rockchip,rk3288-efuse" - for RK3288 SoCs.
-  - "rockchip,rk3328-efuse" - for RK3328 SoCs.
-  - "rockchip,rk3368-efuse" - for RK3368 SoCs.
-  - "rockchip,rk3399-efuse" - for RK3399 SoCs.
-- reg: Should contain the registers location and exact eFuse size
-- clocks: Should be the clock id of eFuse
-- clock-names: Should be "pclk_efuse"
-
-Optional properties:
-- rockchip,efuse-size: Should be exact eFuse size in byte, the eFuse
-  size in property <reg> will be invalid if define this property.
-
-Deprecated properties:
-- compatible: "rockchip,rockchip-efuse"
-  Old efuse compatible value compatible to rk3066a, rk3188 and rk3288
-  efuses
-
-= Data cells =
-Are child nodes of eFuse, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example:
-
-	efuse: efuse@ffb40000 {
-		compatible = "rockchip,rk3288-efuse";
-		reg = <0xffb40000 0x20>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		clocks = <&cru PCLK_EFUSE256>;
-		clock-names = "pclk_efuse";
-
-		/* Data cells */
-		cpu_leakage: cpu_leakage {
-			reg = <0x17 0x1>;
-		};
-	};
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-Example:
-
-	cpu_leakage {
-		...
-		nvmem-cells = <&cpu_leakage>;
-		nvmem-cell-names = "cpu_leakage";
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
new file mode 100644
index 000000000000..febee8129aa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/rockchip-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip eFuse
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3066a-efuse
+      - rockchip,rk3188-efuse
+      - rockchip,rk3228-efuse
+      - rockchip,rk3288-efuse
+      - rockchip,rk3328-efuse
+      - rockchip,rk3368-efuse
+      - rockchip,rk3399-efuse
+
+      # Deprecated: old compatible value for rk3066a, rk3188 and rk3288
+      - rockchip,rockchip-efuse
+
+  reg:
+    description:
+      Registers location and eFuse size.
+    maxItems: 1
+
+  clocks:
+    description:
+      eFuse clock id.
+    maxItems: 1
+
+  clock-names:
+    const: pclk_efuse
+
+  rockchip,efuse-size:
+    description:
+      eFuse size in bytes. The eFuse size in property <reg> will be invalid if
+      this property is defined.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    efuse: efuse@ffb40000 {
+            compatible = "rockchip,rk3288-efuse";
+            reg = <0xffb40000 0x20>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            clocks = <&cru PCLK_EFUSE256>;
+            clock-names = "pclk_efuse";
+
+            /* Data cells */
+            cpu_leakage: cpu_leakage@17 {
+                    reg = <0x17 0x1>;
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt
deleted file mode 100644
index 3cb170896658..000000000000
--- a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Device tree bindings for Low Power General Purpose Register found in i.MX6Q/D
-and i.MX7 Secure Non-Volatile Storage.
-
-This DT node should be represented as a sub-node of a "syscon",
-"simple-mfd" node.
-
-Required properties:
-- compatible: should be one of the fallowing variants:
-	"fsl,imx6q-snvs-lpgpr" for Freescale i.MX6Q/D/DL/S
-	"fsl,imx6ul-snvs-lpgpr" for Freescale i.MX6UL
-	"fsl,imx7d-snvs-lpgpr" for Freescale i.MX7D/S
-
-Example:
-snvs: snvs@020cc000 {
-	compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-	reg = <0x020cc000 0x4000>;
-
-	snvs_lpgpr: snvs-lpgpr {
-		compatible = "fsl,imx6q-snvs-lpgpr";
-	};
-};
diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
new file mode 100644
index 000000000000..e374aa7891ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/snvs-lpgpr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Low Power General Purpose Register found in i.MX Secure Non-Volatile Storage
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6q-snvs-lpgpr
+      - fsl,imx6ul-snvs-lpgpr
+      - fsl,imx7d-snvs-lpgpr
+      - fsl,imx8mm-snvs-lpgpr
+      - fsl,imx8mn-snvs-lpgpr
+      - fsl,imx8mp-snvs-lpgpr
+      - fsl,imx8mq-snvs-lpgpr
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    snvs@20cc000 {
+        compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+        reg = <0x20cc000 0x4000>;
+
+        snvs_lpgpr: snvs-lpgpr {
+            compatible = "fsl,imx6q-snvs-lpgpr";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
new file mode 100644
index 000000000000..2578e39deda9
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/socionext,uniphier-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier eFuse bindings
+
+maintainers:
+  - Keiji Hayashibara <hayashibara.keiji@socionext.com>
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  "#address-cells": true
+  "#size-cells": true
+
+  compatible:
+    const: socionext,uniphier-efuse
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // The UniPhier eFuse should be a subnode of a "soc-glue" node.
+
+    soc-glue@5f900000 {
+        compatible = "simple-mfd";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x5f900000 0x2000>;
+
+        efuse@100 {
+            compatible = "socionext,uniphier-efuse";
+            reg = <0x100 0x28>;
+        };
+
+        efuse@200 {
+            compatible = "socionext,uniphier-efuse";
+            reg = <0x200 0x68>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            /* Data cells */
+            usb_rterm0: trim@54,4 {
+                reg = <0x54 1>;
+                bits = <4 2>;
+            };
+            usb_rterm1: trim@55,4 {
+                reg = <0x55 1>;
+                bits = <4 2>;
+            };
+            usb_rterm2: trim@58,4 {
+                reg = <0x58 1>;
+                bits = <4 2>;
+            };
+            usb_rterm3: trim@59,4 {
+                reg = <0x59 1>;
+                bits = <4 2>;
+            };
+            usb_sel_t0: trim@54,0 {
+                reg = <0x54 1>;
+                bits = <0 4>;
+            };
+            usb_sel_t1: trim@55,0 {
+                reg = <0x55 1>;
+                bits = <0 4>;
+            };
+            usb_sel_t2: trim@58,0 {
+                reg = <0x58 1>;
+                bits = <0 4>;
+            };
+            usb_sel_t3: trim@59,0 {
+                reg = <0x59 1>;
+                bits = <0 4>;
+            };
+            usb_hs_i0: trim@56,0 {
+                reg = <0x56 1>;
+                bits = <0 4>;
+            };
+            usb_hs_i2: trim@5a,0 {
+                reg = <0x5a 1>;
+                bits = <0 4>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
index d84deb4774a4..448a2678dc62 100644
--- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
@@ -13,7 +13,7 @@ description: |
   internal vref (VREFIN_CAL), unique device ID...
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 allOf:
   - $ref: "nvmem.yaml#"
@@ -24,12 +24,29 @@ properties:
       - st,stm32f4-otp
       - st,stm32mp15-bsec
 
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+
+    properties:
+      st,non-secure-otp:
+        description: |
+          This property explicits a factory programmed area that both secure
+          and non-secure worlds can access. It is needed when, by default, the
+          related area can only be reached by the secure world.
+        type: boolean
+
 required:
   - "#address-cells"
   - "#size-cells"
   - compatible
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     efuse@1fff7800 {
@@ -41,6 +58,11 @@ examples:
       calib@22c {
         reg = <0x22c 0x2>;
       };
+
+      mac_addr@e4 {
+        reg = <0xe4 0x8>;
+        st,non-secure-otp;
+      };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
new file mode 100644
index 000000000000..a7644ebbc2ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/sunplus,sp7021-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: On-Chip OTP Memory for Sunplus SP7021
+
+maintainers:
+  - Vincent Shih <vincent.sunplus@gmail.com>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    const: sunplus,sp7021-ocotp
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: hb_gpio
+      - const: otprx
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  thermal-calibration:
+    type: object
+    description: thermal calibration values
+
+  disconnect-voltage:
+    type: object
+    description: disconnect voltages of usb2 port 0 and port 1
+
+  mac-address0:
+    type: object
+    description: MAC address of ethernet port 0
+
+  mac-address1:
+    type: object
+    description: MAC address of ethernet port 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    otp: otp@9c00af00 {
+        compatible = "sunplus,sp7021-ocotp";
+        reg = <0x9c00af00 0x34>, <0x9c00af80 0x58>;
+        reg-names = "hb_gpio", "otprx";
+        clocks = <&clkc 0x15>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        therm_calib: thermal-calibration@14 {
+          reg = <0x14 0x3>;
+        };
+        disc_vol: disconnect-voltage@18 {
+          reg = <0x18 0x2>;
+        };
+        mac_addr0: mac-address0@34 {
+          reg = <0x34 0x6>;
+        };
+        mac_addr1: mac-address1@3a {
+          reg = <0x3a 0x6>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
new file mode 100644
index 000000000000..e96bca99f2d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/u-boot,env.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-Boot environment variables
+
+description: |
+  U-Boot uses environment variables to store device parameters and
+  configuration. They may be used for booting process, setup or keeping end user
+  info.
+
+  Data is stored using U-Boot specific formats (variant specific header and NUL
+  separated key-value pairs).
+
+  Environment data can be stored on various storage entities, e.g.:
+  1. Raw flash partition
+  2. UBI volume
+
+  This binding allows marking storage device (as containing env data) and
+  specifying used format.
+
+  Right now only flash partition case is covered but it may be extended to e.g.
+  UBI volumes in the future.
+
+  Variables can be defined as NVMEM device subnodes.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    oneOf:
+      - description: A standalone env data block
+        const: u-boot,env
+      - description: Two redundant blocks with active one flagged
+        const: u-boot,env-redundant-bool
+      - description: Two redundant blocks with active having higher counter
+        const: u-boot,env-redundant-count
+
+  reg:
+    maxItems: 1
+
+  bootcmd:
+    type: object
+    description: Command to use for automatic booting
+
+  ethaddr:
+    type: object
+    description: Ethernet interface's MAC address
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            reg = <0x0 0x40000>;
+            label = "u-boot";
+            read-only;
+        };
+
+        env: partition@40000 {
+            compatible = "u-boot,env";
+            reg = <0x40000 0x10000>;
+
+            mac: ethaddr {
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt b/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt
deleted file mode 100644
index eccf490d5a6d..000000000000
--- a/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-= UniPhier eFuse device tree bindings =
-
-This UniPhier eFuse must be under soc-glue.
-
-Required properties:
-- compatible: should be "socionext,uniphier-efuse"
-- reg: should contain the register location and length
-
-= Data cells =
-Are child nodes of efuse, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example:
-
-	soc-glue@5f900000 {
-		compatible = "socionext,uniphier-ld20-soc-glue-debug",
-			     "simple-mfd";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x5f900000 0x2000>;
-
-		efuse@100 {
-			compatible = "socionext,uniphier-efuse";
-			reg = <0x100 0x28>;
-		};
-
-		efuse@200 {
-			compatible = "socionext,uniphier-efuse";
-			reg = <0x200 0x68>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/* Data cells */
-			usb_mon: usb-mon@54 {
-				reg = <0x54 0xc>;
-			};
-		};
-	};
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-Example:
-
-	usb {
-		...
-		nvmem-cells = <&usb_mon>;
-		nvmem-cell-names = "usb_mon";
-	}
diff --git a/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt b/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt
index 56ed481c3e26..72ba628f6d0b 100644
--- a/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt
+++ b/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt
@@ -2,7 +2,7 @@ On-Chip OTP Memory for Freescale Vybrid
 
 Required Properties:
   compatible:
-  - "fsl,vf610-ocotp" for VF5xx/VF6xx
+  - "fsl,vf610-ocotp", "syscon" for VF5xx/VF6xx
   #address-cells : Should be 1
   #size-cells : Should be 1
   reg : Address and length of OTP controller and fuse map registers
@@ -11,7 +11,7 @@ Required Properties:
 Example for Vybrid VF5xx/VF6xx:
 
 	ocotp: ocotp@400a5000 {
-		compatible = "fsl,vf610-ocotp";
+		compatible = "fsl,vf610-ocotp", "syscon";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x400a5000 0xCF0>;
diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
index aef87a33a7c9..385b0692261c 100644
--- a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
+++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/opp/allwinner,sun50i-h6-operating-points.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H6 CPU OPP Device Tree Bindings
+title: Allwinner H6 CPU OPP
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -18,6 +18,9 @@ description: |
   sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to
   provide the OPP framework with required information.
 
+allOf:
+  - $ref: opp-v2-base.yaml#
+
 properties:
   compatible:
     const: allwinner,sun50i-h6-operating-points
@@ -31,6 +34,8 @@ properties:
       Documentation/devicetree/bindings/nvmem/nvmem.txt and also
       examples below.
 
+  opp-shared: true
+
 required:
   - compatible
   - nvmem-cells
@@ -41,6 +46,7 @@ patternProperties:
 
     properties:
       opp-hz: true
+      clock-latency-ns: true
 
     patternProperties:
       "opp-microvolt-.*": true
@@ -53,7 +59,7 @@ patternProperties:
 
     unevaluatedProperties: false
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/opp/opp-v1.yaml b/Documentation/devicetree/bindings/opp/opp-v1.yaml
new file mode 100644
index 000000000000..d585d536a3fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v1.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points) v1 Bindings
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description: |+
+  Devices work at voltage-current-frequency combinations and some implementations
+  have the liberty of choosing these. These combinations are called Operating
+  Performance Points aka OPPs. This document defines bindings for these OPPs
+  applicable across wide range of devices. For illustration purpose, this document
+  uses CPU as a device.
+
+  This binding only supports voltage-frequency pairs.
+
+select: true
+
+properties:
+  operating-points:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: Frequency in kHz
+        - description: Voltage for OPP in uV
+
+
+additionalProperties: true
+examples:
+  - |
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a9";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            operating-points =
+                /* kHz    uV */
+                <792000 1100000>,
+                <396000 950000>,
+                <198000 850000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
new file mode 100644
index 000000000000..66d0ec763f0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
@@ -0,0 +1,249 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-base.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points) Common Binding
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description: |
+  Devices work at voltage-current-frequency combinations and some implementations
+  have the liberty of choosing these. These combinations are called Operating
+  Performance Points aka OPPs. This document defines bindings for these OPPs
+  applicable across wide range of devices. For illustration purpose, this document
+  uses CPU as a device.
+
+  This describes the OPPs belonging to a device.
+
+select: false
+
+properties:
+  $nodename:
+    pattern: '^opp-table(-[a-z0-9]+)?$'
+
+  opp-shared:
+    description:
+      Indicates that device nodes using this OPP Table Node's phandle switch
+      their DVFS state together, i.e. they share clock/voltage/current lines.
+      Missing property means devices have independent clock/voltage/current
+      lines, but they share OPP tables.
+    type: boolean
+
+patternProperties:
+  '^opp(-?[0-9]+)*$':
+    type: object
+    description:
+      One or more OPP nodes describing voltage-current-frequency combinations.
+      Their name isn't significant but their phandle can be used to reference an
+      OPP. These are mandatory except for the case where the OPP table is
+      present only to indicate dependency between devices using the opp-shared
+      property.
+
+    properties:
+      opp-hz:
+        description:
+          Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
+          required property for all device nodes, unless another "required"
+          property to uniquely identify the OPP nodes exists. Devices like power
+          domains must have another (implementation dependent) property.
+
+          Entries for multiple clocks shall be provided in the same field, as
+          array of frequencies.  The OPP binding doesn't provide any provisions
+          to relate the values to their clocks or the order in which the clocks
+          need to be configured and that is left for the implementation
+          specific binding.
+        minItems: 1
+        maxItems: 16
+        items:
+          maxItems: 1
+
+      opp-microvolt:
+        description: |
+          Voltage for the OPP
+
+          A single regulator's voltage is specified with an array of size one or three.
+          Single entry is for target voltage and three entries are for <target min max>
+          voltages.
+
+          Entries for multiple regulators shall be provided in the same field separated
+          by angular brackets <>. The OPP binding doesn't provide any provisions to
+          relate the values to their power supplies or the order in which the supplies
+          need to be configured and that is left for the implementation specific
+          binding.
+
+          Entries for all regulators shall be of the same size, i.e. either all use a
+          single value or triplets.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+        items:
+          minItems: 1
+          maxItems: 3
+
+      opp-microamp:
+        description: |
+          The maximum current drawn by the device in microamperes considering
+          system specific parameters (such as transients, process, aging,
+          maximum operating temperature range etc.) as necessary. This may be
+          used to set the most efficient regulator operating mode.
+
+          Should only be set if opp-microvolt or opp-microvolt-<name> is set for
+          the OPP.
+
+          Entries for multiple regulators shall be provided in the same field
+          separated by angular brackets <>. If current values aren't required
+          for a regulator, then it shall be filled with 0. If current values
+          aren't required for any of the regulators, then this field is not
+          required. The OPP binding doesn't provide any provisions to relate the
+          values to their power supplies or the order in which the supplies need
+          to be configured and that is left for the implementation specific
+          binding.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+      opp-microwatt:
+        description: |
+          The power for the OPP in micro-Watts.
+
+          Entries for multiple regulators shall be provided in the same field
+          separated by angular brackets <>. If current values aren't required
+          for a regulator, then it shall be filled with 0. If power values
+          aren't required for any of the regulators, then this field is not
+          required. The OPP binding doesn't provide any provisions to relate the
+          values to their power supplies or the order in which the supplies need
+          to be configured and that is left for the implementation specific
+          binding.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+      opp-level:
+        description:
+          A value representing the performance level of the device.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      opp-peak-kBps:
+        description:
+          Peak bandwidth in kilobytes per second, expressed as an array of
+          32-bit big-endian integers. Each element of the array represents the
+          peak bandwidth value of each interconnect path. The number of elements
+          should match the number of interconnect paths.
+        minItems: 1
+        maxItems: 32  # Should be enough
+
+      opp-avg-kBps:
+        description:
+          Average bandwidth in kilobytes per second, expressed as an array
+          of 32-bit big-endian integers. Each element of the array represents the
+          average bandwidth value of each interconnect path. The number of elements
+          should match the number of interconnect paths. This property is only
+          meaningful in OPP tables where opp-peak-kBps is present.
+        minItems: 1
+        maxItems: 32  # Should be enough
+
+      clock-latency-ns:
+        description:
+          Specifies the maximum possible transition latency (in nanoseconds) for
+          switching to this OPP from any other OPP.
+
+      turbo-mode:
+        description:
+          Marks the OPP to be used only for turbo modes. Turbo mode is available
+          on some platforms, where the device can run over its operating
+          frequency for a short duration of time limited by the device's power,
+          current and thermal limits.
+        type: boolean
+
+      opp-suspend:
+        description:
+          Marks the OPP to be used during device suspend. If multiple OPPs in
+          the table have this, the OPP with highest opp-hz will be used.
+        type: boolean
+
+      opp-supported-hw:
+        description: |
+          This property allows a platform to enable only a subset of the OPPs
+          from the larger set present in the OPP table, based on the current
+          version of the hardware (already known to the operating system).
+
+          Each block present in the array of blocks in this property, represents
+          a sub-group of hardware versions supported by the OPP. i.e. <sub-group
+          A>, <sub-group B>, etc. The OPP will be enabled if _any_ of these
+          sub-groups match the hardware's version.
+
+          Each sub-group is a platform defined array representing the hierarchy
+          of hardware versions supported by the platform. For a platform with
+          three hierarchical levels of version (X.Y.Z), this field shall look
+          like
+
+          opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>.
+
+          Each level (eg. X1) in version hierarchy is represented by a 32 bit
+          value, one bit per version and so there can be maximum 32 versions per
+          level. Logical AND (&) operation is performed for each level with the
+          hardware's level version and a non-zero output for _all_ the levels in
+          a sub-group means the OPP is supported by hardware. A value of
+          0xFFFFFFFF for each level in the sub-group will enable the OPP for all
+          versions for the hardware.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        maxItems: 32
+        items:
+          minItems: 1
+          maxItems: 4
+
+      required-opps:
+        description:
+          This contains phandle to an OPP node in another device's OPP table. It
+          may contain an array of phandles, where each phandle points to an OPP
+          of a different device. It should not contain multiple phandles to the
+          OPP nodes in the same OPP table. This specifies the minimum required
+          OPP of the device(s), whose OPP's phandle is present in this property,
+          for the functioning of the current device at the current OPP (where
+          this property is present).
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          maxItems: 1
+
+    patternProperties:
+      '^opp-microvolt-':
+        description:
+          Named opp-microvolt property. This is exactly similar to the above
+          opp-microvolt property, but allows multiple voltage ranges to be
+          provided for the same OPP. At runtime, the platform can pick a <name>
+          and matching opp-microvolt-<name> property will be enabled for all
+          OPPs. If the platform doesn't pick a specific <name> or the <name>
+          doesn't match with any opp-microvolt-<name> properties, then
+          opp-microvolt property shall be used, if present.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+        items:
+          minItems: 1
+          maxItems: 3
+
+      '^opp-microamp-':
+        description:
+          Named opp-microamp property. Similar to opp-microvolt-<name> property,
+          but for microamp instead.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+      '^opp-microwatt':
+        description:
+          Named opp-microwatt property. Similar to opp-microamp property,
+          but for microwatt instead.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+    dependencies:
+      opp-avg-kBps: [ opp-peak-kBps ]
+
+required:
+  - compatible
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
new file mode 100644
index 000000000000..a202b6c6561d
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-kryo-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. NVMEM OPP bindings
+
+maintainers:
+  - Ilia Lin <ilia.lin@kernel.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+description: |
+  In certain Qualcomm Technologies, Inc. SoCs like APQ8096 and MSM8996,
+  the CPU frequencies subset and voltage value of each OPP varies based on
+  the silicon variant in use.
+  Qualcomm Technologies, Inc. Process Voltage Scaling Tables
+  defines the voltage and frequency value based on the speedbin blown in
+  the efuse combination.
+  The qcom-cpufreq-nvmem driver reads the efuse value from the SoC to provide
+  the OPP framework with required information (existing HW bitmap).
+  This is used to determine the voltage and frequency value for each OPP of
+  operating-points-v2 table when it is parsed by the OPP framework.
+
+properties:
+  compatible:
+    const: operating-points-v2-kryo-cpu
+
+  nvmem-cells:
+    description: |
+      A phandle pointing to a nvmem-cells node representing the
+      efuse registers that has information about the
+      speedbin that is used to select the right frequency/voltage
+      value pair.
+
+  opp-shared: true
+
+patternProperties:
+  '^opp-?[0-9]+$':
+    type: object
+    additionalProperties: false
+
+    properties:
+      opp-hz: true
+
+      opp-microvolt: true
+
+      opp-supported-hw:
+        description: |
+          A single 32 bit bitmap value, representing compatible HW.
+          Bitmap:
+          0:  MSM8996, speedbin 0
+          1:  MSM8996, speedbin 1
+          2:  MSM8996, speedbin 2
+          3-31:  unused
+        maximum: 0x7
+
+      clock-latency-ns: true
+
+      required-opps: true
+
+    required:
+      - opp-hz
+
+required:
+  - compatible
+
+if:
+  required:
+    - nvmem-cells
+then:
+  patternProperties:
+    '^opp-?[0-9]+$':
+      required:
+        - opp-supported-hw
+
+additionalProperties: false
+
+examples:
+  - |
+    / {
+        model = "Qualcomm Technologies, Inc. DB820c";
+        compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cpus {
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            CPU0: cpu@0 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x0>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 0>;
+                operating-points-v2 = <&cluster0_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_0>;
+                L2_0: l2-cache {
+                    compatible = "cache";
+                    cache-level = <2>;
+                };
+            };
+
+            CPU1: cpu@1 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x1>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 0>;
+                operating-points-v2 = <&cluster0_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_0>;
+            };
+
+            CPU2: cpu@100 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x100>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 1>;
+                operating-points-v2 = <&cluster1_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_1>;
+                L2_1: l2-cache {
+                    compatible = "cache";
+                    cache-level = <2>;
+                };
+            };
+
+            CPU3: cpu@101 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x101>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 1>;
+                operating-points-v2 = <&cluster1_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_1>;
+            };
+
+            cpu-map {
+                cluster0 {
+                    core0 {
+                        cpu = <&CPU0>;
+                    };
+
+                    core1 {
+                        cpu = <&CPU1>;
+                    };
+                };
+
+                cluster1 {
+                    core0 {
+                        cpu = <&CPU2>;
+                    };
+
+                    core1 {
+                        cpu = <&CPU3>;
+                    };
+                };
+            };
+        };
+
+        cluster0_opp: opp-table-0 {
+            compatible = "operating-points-v2-kryo-cpu";
+            nvmem-cells = <&speedbin_efuse>;
+            opp-shared;
+
+            opp-307200000 {
+                opp-hz = /bits/ 64 <307200000>;
+                opp-microvolt = <905000 905000 1140000>;
+                opp-supported-hw = <0x7>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1401600000 {
+                opp-hz = /bits/ 64 <1401600000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x5>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp2>;
+            };
+            opp-1593600000 {
+                opp-hz = /bits/ 64 <1593600000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x1>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp3>;
+            };
+        };
+
+        cluster1_opp: opp-table-1 {
+            compatible = "operating-points-v2-kryo-cpu";
+            nvmem-cells = <&speedbin_efuse>;
+            opp-shared;
+
+            opp-307200000 {
+                opp-hz = /bits/ 64 <307200000>;
+                opp-microvolt = <905000 905000 1140000>;
+                opp-supported-hw = <0x7>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1804800000 {
+                opp-hz = /bits/ 64 <1804800000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x6>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp4>;
+            };
+            opp-1900800000 {
+                opp-hz = /bits/ 64 <1900800000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x4>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp5>;
+            };
+            opp-2150400000 {
+                opp-hz = /bits/ 64 <2150400000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x1>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp6>;
+            };
+        };
+
+        smem {
+            compatible = "qcom,smem";
+            memory-region = <&smem_mem>;
+            hwlocks = <&tcsr_mutex 3>;
+        };
+
+        soc {
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            qfprom: qfprom@74000 {
+                compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
+                reg = <0x00074000 0x8ff>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                speedbin_efuse: speedbin@133 {
+                    reg = <0x133 0x1>;
+                    bits = <5 3>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
new file mode 100644
index 000000000000..df8442fb11f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm OPP bindings to describe OPP nodes.
+
+maintainers:
+  - Niklas Cassel <nks@flawful.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    const: operating-points-v2-qcom-level
+
+patternProperties:
+  '^opp-?[0-9]+$':
+    type: object
+    additionalProperties: false
+
+    properties:
+      opp-level: true
+
+      qcom,opp-fuse-level:
+        description: |
+          A positive value representing the fuse corner/level associated with
+          this OPP node. Sometimes several corners/levels shares a certain fuse
+          corner/level. A fuse corner/level contains e.g. ref uV, min uV,
+          and max uV.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - opp-level
+      - qcom,opp-fuse-level
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    cpr_opp_table: opp-table-cpr {
+        compatible = "operating-points-v2-qcom-level";
+
+        cpr_opp1: opp1 {
+            opp-level = <1>;
+            qcom,opp-fuse-level = <1>;
+        };
+        cpr_opp2: opp2 {
+            opp-level = <2>;
+            qcom,opp-fuse-level = <2>;
+        };
+        cpr_opp3: opp3 {
+            opp-level = <3>;
+            qcom,opp-fuse-level = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/opp/opp-v2.yaml b/Documentation/devicetree/bindings/opp/opp-v2.yaml
new file mode 100644
index 000000000000..eaf8fba2c691
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2.yaml
@@ -0,0 +1,475 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points) Bindings
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    const: operating-points-v2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /*
+     * Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states
+     * together.
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a9";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cpu0_opp_table0>;
+        };
+
+        cpu@1 {
+            compatible = "arm,cortex-a9";
+            device_type = "cpu";
+            reg = <1>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cpu0_opp_table0>;
+        };
+    };
+
+    cpu0_opp_table0: opp-table {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <975000 970000 985000>;
+            opp-microamp = <70000>;
+            clock-latency-ns = <300000>;
+            opp-suspend;
+        };
+        opp-1100000000 {
+            opp-hz = /bits/ 64 <1100000000>;
+            opp-microvolt = <1000000 980000 1010000>;
+            opp-microamp = <80000>;
+            clock-latency-ns = <310000>;
+        };
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt = <1025000>;
+            clock-latency-ns = <290000>;
+            turbo-mode;
+        };
+    };
+
+  - |
+    /*
+     * Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states
+     * independently.
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+
+        cpu@1 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <1>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 1>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply1>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+
+        cpu@2 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <2>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 2>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply2>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+
+        cpu@3 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <3>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 3>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply3>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+    };
+
+    cpu_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        /*
+         * Missing opp-shared property means CPUs switch DVFS states
+         * independently.
+         */
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <975000 970000 985000>;
+            opp-microamp = <70000>;
+            clock-latency-ns = <300000>;
+            opp-suspend;
+        };
+        opp-1100000000 {
+            opp-hz = /bits/ 64 <1100000000>;
+            opp-microvolt = <1000000 980000 1010000>;
+            opp-microamp = <80000>;
+            clock-latency-ns = <310000>;
+        };
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt = <1025000>;
+            opp-microamp = <90000>;
+            lock-latency-ns = <290000>;
+            turbo-mode;
+        };
+    };
+
+  - |
+    /*
+     * Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch
+     * DVFS state together.
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cluster0_opp>;
+        };
+
+        cpu@1 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <1>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cluster0_opp>;
+        };
+
+        cpu@100 {
+            compatible = "arm,cortex-a15";
+            device_type = "cpu";
+            reg = <100>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 1>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply1>;
+            operating-points-v2 = <&cluster1_opp>;
+        };
+
+        cpu@101 {
+            compatible = "arm,cortex-a15";
+            device_type = "cpu";
+            reg = <101>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 1>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply1>;
+            operating-points-v2 = <&cluster1_opp>;
+        };
+    };
+
+    cluster0_opp: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <975000 970000 985000>;
+            opp-microamp = <70000>;
+            clock-latency-ns = <300000>;
+            opp-suspend;
+        };
+        opp-1100000000 {
+            opp-hz = /bits/ 64 <1100000000>;
+            opp-microvolt = <1000000 980000 1010000>;
+            opp-microamp = <80000>;
+            clock-latency-ns = <310000>;
+        };
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt = <1025000>;
+            opp-microamp = <90000>;
+            clock-latency-ns = <290000>;
+            turbo-mode;
+        };
+    };
+
+    cluster1_opp: opp-table-1 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1300000000 {
+            opp-hz = /bits/ 64 <1300000000>;
+            opp-microvolt = <1050000 1045000 1055000>;
+            opp-microamp = <95000>;
+            clock-latency-ns = <400000>;
+            opp-suspend;
+        };
+        opp-1400000000 {
+            opp-hz = /bits/ 64 <1400000000>;
+            opp-microvolt = <1075000>;
+            opp-microamp = <100000>;
+            clock-latency-ns = <400000>;
+        };
+        opp-1500000000 {
+            opp-hz = /bits/ 64 <1500000000>;
+            opp-microvolt = <1100000 1010000 1110000>;
+            opp-microamp = <95000>;
+            clock-latency-ns = <400000>;
+            turbo-mode;
+        };
+    };
+
+  - |
+    /* Example 4: Handling multiple regulators */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "foo,cpu-type";
+            device_type = "cpu";
+            reg = <0>;
+
+            vcc0-supply = <&cpu_supply0>;
+            vcc1-supply = <&cpu_supply1>;
+            vcc2-supply = <&cpu_supply2>;
+            operating-points-v2 = <&cpu0_opp_table4>;
+        };
+    };
+
+    cpu0_opp_table4: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <970000>, /* Supply 0 */
+                            <960000>, /* Supply 1 */
+                            <960000>; /* Supply 2 */
+            opp-microamp =  <70000>,  /* Supply 0 */
+                            <70000>,  /* Supply 1 */
+                            <70000>;  /* Supply 2 */
+            clock-latency-ns = <300000>;
+        };
+
+        /* OR */
+
+        opp-1000000001 {
+            opp-hz = /bits/ 64 <1000000001>;
+            opp-microvolt = <975000 970000 985000>, /* Supply 0 */
+                            <965000 960000 975000>, /* Supply 1 */
+                            <965000 960000 975000>; /* Supply 2 */
+            opp-microamp =  <70000>,    /* Supply 0 */
+                <70000>,    /* Supply 1 */
+                <70000>;    /* Supply 2 */
+            clock-latency-ns = <300000>;
+        };
+
+        /* OR */
+
+        opp-1000000002 {
+            opp-hz = /bits/ 64 <1000000002>;
+            opp-microvolt = <975000 970000 985000>, /* Supply 0 */
+                <965000 960000 975000>, /* Supply 1 */
+                <965000 960000 975000>; /* Supply 2 */
+            opp-microamp =  <70000>,    /* Supply 0 */
+                <0>,      /* Supply 1 doesn't need this */
+                <70000>;    /* Supply 2 */
+            clock-latency-ns = <300000>;
+        };
+    };
+
+  - |
+    /*
+     * Example 5: opp-supported-hw
+     * (example: three level hierarchy of versions: cuts, substrate and process)
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <0>;
+            cpu-supply = <&cpu_supply>;
+            operating-points-v2 = <&cpu0_opp_table_slow>;
+        };
+    };
+
+    cpu0_opp_table_slow: opp-table {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-600000000 {
+            /*
+             * Supports all substrate and process versions for 0xF
+             * cuts, i.e. only first four cuts.
+             */
+            opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>;
+            opp-hz = /bits/ 64 <600000000>;
+        };
+
+        opp-800000000 {
+            /*
+             * Supports:
+             * - cuts: only one, 6th cut (represented by 6th bit).
+             * - substrate: supports 16 different substrate versions
+             * - process: supports 9 different process versions
+             */
+            opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>;
+            opp-hz = /bits/ 64 <800000000>;
+        };
+
+        opp-900000000 {
+            /*
+             * Supports:
+             * - All cuts and substrate where process version is 0x2.
+             * - All cuts and process where substrate version is 0x2.
+             */
+            opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>,
+                               <0xFFFFFFFF 0x01 0xFFFFFFFF>;
+            opp-hz = /bits/ 64 <900000000>;
+        };
+    };
+
+  - |
+    /*
+     * Example 6: opp-microvolt-<name>, opp-microamp-<name>:
+     * (example: device with two possible microvolt ranges: slow and fast)
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <0>;
+            operating-points-v2 = <&cpu0_opp_table6>;
+        };
+    };
+
+    cpu0_opp_table6: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt-slow = <915000 900000 925000>;
+            opp-microvolt-fast = <975000 970000 985000>;
+            opp-microamp-slow =  <70000>;
+            opp-microamp-fast =  <71000>;
+        };
+
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */
+                                 <925000 910000 935000>; /* Supply vcc1 */
+            opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */
+                                 <965000 960000 975000>; /* Supply vcc1 */
+            opp-microamp =  <70000>; /* Will be used for both slow/fast */
+        };
+    };
+
+  - |
+    /*
+     * Example 7: Single cluster Quad-core ARM cortex A53, OPP points from firmware,
+     * distinct clock controls but two sets of clock/voltage/current lines.
+     */
+    cpus {
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x100>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 0>;
+            operating-points-v2 = <&cpu_opp0_table>;
+        };
+        cpu@1 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x101>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 1>;
+            operating-points-v2 = <&cpu_opp0_table>;
+        };
+        cpu@2 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x102>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 2>;
+            operating-points-v2 = <&cpu_opp1_table>;
+        };
+        cpu@3 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x103>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 3>;
+            operating-points-v2 = <&cpu_opp1_table>;
+        };
+
+    };
+
+    cpu_opp0_table: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+    };
+
+    cpu_opp1_table: opp-table-1 {
+        compatible = "operating-points-v2";
+        opp-shared;
+    };
+...
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
deleted file mode 100644
index 68592271461f..000000000000
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ /dev/null
@@ -1,548 +0,0 @@
-Generic OPP (Operating Performance Points) Bindings
-----------------------------------------------------
-
-Devices work at voltage-current-frequency combinations and some implementations
-have the liberty of choosing these. These combinations are called Operating
-Performance Points aka OPPs. This document defines bindings for these OPPs
-applicable across wide range of devices. For illustration purpose, this document
-uses CPU as a device.
-
-This document contain multiple versions of OPP binding and only one of them
-should be used per device.
-
-Binding 1: operating-points
-============================
-
-This binding only supports voltage-frequency pairs.
-
-Properties:
-- operating-points: An array of 2-tuples items, and each item consists
-  of frequency and voltage like <freq-kHz vol-uV>.
-	freq: clock frequency in kHz
-	vol: voltage in microvolt
-
-Examples:
-
-cpu@0 {
-	compatible = "arm,cortex-a9";
-	reg = <0>;
-	next-level-cache = <&L2>;
-	operating-points = <
-		/* kHz    uV */
-		792000  1100000
-		396000  950000
-		198000  850000
-	>;
-};
-
-
-Binding 2: operating-points-v2
-============================
-
-* Property: operating-points-v2
-
-Devices supporting OPPs must set their "operating-points-v2" property with
-phandle to a OPP table in their DT node. The OPP core will use this phandle to
-find the operating points for the device.
-
-This can contain more than one phandle for power domain providers that provide
-multiple power domains. That is, one phandle for each power domain. If only one
-phandle is available, then the same OPP table will be used for all power domains
-provided by the power domain provider.
-
-If required, this can be extended for SoC vendor specific bindings. Such bindings
-should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
-and should have a compatible description like: "operating-points-v2-<vendor>".
-
-* OPP Table Node
-
-This describes the OPPs belonging to a device. This node can have following
-properties:
-
-Required properties:
-- compatible: Allow OPPs to express their compatibility. It should be:
-  "operating-points-v2".
-
-- OPP nodes: One or more OPP nodes describing voltage-current-frequency
-  combinations. Their name isn't significant but their phandle can be used to
-  reference an OPP.
-
-Optional properties:
-- opp-shared: Indicates that device nodes using this OPP Table Node's phandle
-  switch their DVFS state together, i.e. they share clock/voltage/current lines.
-  Missing property means devices have independent clock/voltage/current lines,
-  but they share OPP tables.
-
-- status: Marks the OPP table enabled/disabled.
-
-
-* OPP Node
-
-This defines voltage-current-frequency combinations along with other related
-properties.
-
-Required properties:
-- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
-  required property for all device nodes but devices like power domains. The
-  power domain nodes must have another (implementation dependent) property which
-  uniquely identifies the OPP nodes.
-
-Optional properties:
-- opp-microvolt: voltage in micro Volts.
-
-  A single regulator's voltage is specified with an array of size one or three.
-  Single entry is for target voltage and three entries are for <target min max>
-  voltages.
-
-  Entries for multiple regulators shall be provided in the same field separated
-  by angular brackets <>. The OPP binding doesn't provide any provisions to
-  relate the values to their power supplies or the order in which the supplies
-  need to be configured and that is left for the implementation specific
-  binding.
-
-  Entries for all regulators shall be of the same size, i.e. either all use a
-  single value or triplets.
-
-- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
-  the above opp-microvolt property, but allows multiple voltage ranges to be
-  provided for the same OPP. At runtime, the platform can pick a <name> and
-  matching opp-microvolt-<name> property will be enabled for all OPPs. If the
-  platform doesn't pick a specific <name> or the <name> doesn't match with any
-  opp-microvolt-<name> properties, then opp-microvolt property shall be used, if
-  present.
-
-- opp-microamp: The maximum current drawn by the device in microamperes
-  considering system specific parameters (such as transients, process, aging,
-  maximum operating temperature range etc.) as necessary. This may be used to
-  set the most efficient regulator operating mode.
-
-  Should only be set if opp-microvolt is set for the OPP.
-
-  Entries for multiple regulators shall be provided in the same field separated
-  by angular brackets <>. If current values aren't required for a regulator,
-  then it shall be filled with 0. If current values aren't required for any of
-  the regulators, then this field is not required. The OPP binding doesn't
-  provide any provisions to relate the values to their power supplies or the
-  order in which the supplies need to be configured and that is left for the
-  implementation specific binding.
-
-- opp-microamp-<name>: Named opp-microamp property. Similar to
-  opp-microvolt-<name> property, but for microamp instead.
-
-- opp-level: A value representing the performance level of the device,
-  expressed as a 32-bit integer.
-
-- clock-latency-ns: Specifies the maximum possible transition latency (in
-  nanoseconds) for switching to this OPP from any other OPP.
-
-- turbo-mode: Marks the OPP to be used only for turbo modes. Turbo mode is
-  available on some platforms, where the device can run over its operating
-  frequency for a short duration of time limited by the device's power, current
-  and thermal limits.
-
-- opp-suspend: Marks the OPP to be used during device suspend. If multiple OPPs
-  in the table have this, the OPP with highest opp-hz will be used.
-
-- opp-supported-hw: This enables us to select only a subset of OPPs from the
-  larger OPP table, based on what version of the hardware we are running on. We
-  still can't have multiple nodes with the same opp-hz value in OPP table.
-
-  It's a user defined array containing a hierarchy of hardware version numbers,
-  supported by the OPP. For example: a platform with hierarchy of three levels
-  of versions (A, B and C), this field should be like <X Y Z>, where X
-  corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z
-  corresponds to version hierarchy C.
-
-  Each level of hierarchy is represented by a 32 bit value, and so there can be
-  only 32 different supported version per hierarchy. i.e. 1 bit per version. A
-  value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy
-  level. And a value of 0x00000000 will disable the OPP completely, and so we
-  never want that to happen.
-
-  If 32 values aren't sufficient for a version hierarchy, than that version
-  hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the
-  above example, Z1 & Z2 refer to the version hierarchy Z.
-
-- status: Marks the node enabled/disabled.
-
-- required-opps: This contains phandle to an OPP node in another device's OPP
-  table. It may contain an array of phandles, where each phandle points to an
-  OPP of a different device. It should not contain multiple phandles to the OPP
-  nodes in the same OPP table. This specifies the minimum required OPP of the
-  device(s), whose OPP's phandle is present in this property, for the
-  functioning of the current device at the current OPP (where this property is
-  present).
-
-Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
-
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>;
-			opp-microamp = <70000>;
-			clock-latency-ns = <300000>;
-			opp-suspend;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1000000 980000 1010000>;
-			opp-microamp = <80000>;
-			clock-latency-ns = <310000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1025000>;
-			clock-latency-ns = <290000>;
-			turbo-mode;
-		};
-	};
-};
-
-Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states
-independently.
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "qcom,krait";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,krait";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 1>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply1>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-
-		cpu@2 {
-			compatible = "qcom,krait";
-			reg = <2>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 2>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply2>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-
-		cpu@3 {
-			compatible = "qcom,krait";
-			reg = <3>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 3>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply3>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-	};
-
-	cpu_opp_table: opp_table {
-		compatible = "operating-points-v2";
-
-		/*
-		 * Missing opp-shared property means CPUs switch DVFS states
-		 * independently.
-		 */
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>;
-			opp-microamp = <70000>;
-			clock-latency-ns = <300000>;
-			opp-suspend;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1000000 980000 1010000>;
-			opp-microamp = <80000>;
-			clock-latency-ns = <310000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1025000>;
-			opp-microamp = <90000;
-			lock-latency-ns = <290000>;
-			turbo-mode;
-		};
-	};
-};
-
-Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch
-DVFS state together.
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		cpu@100 {
-			compatible = "arm,cortex-a15";
-			reg = <100>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 1>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply1>;
-			operating-points-v2 = <&cluster1_opp>;
-		};
-
-		cpu@101 {
-			compatible = "arm,cortex-a15";
-			reg = <101>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 1>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply1>;
-			operating-points-v2 = <&cluster1_opp>;
-		};
-	};
-
-	cluster0_opp: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>;
-			opp-microamp = <70000>;
-			clock-latency-ns = <300000>;
-			opp-suspend;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1000000 980000 1010000>;
-			opp-microamp = <80000>;
-			clock-latency-ns = <310000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1025000>;
-			opp-microamp = <90000>;
-			clock-latency-ns = <290000>;
-			turbo-mode;
-		};
-	};
-
-	cluster1_opp: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1050000 1045000 1055000>;
-			opp-microamp = <95000>;
-			clock-latency-ns = <400000>;
-			opp-suspend;
-		};
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1075000>;
-			opp-microamp = <100000>;
-			clock-latency-ns = <400000>;
-		};
-		opp-1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1100000 1010000 1110000>;
-			opp-microamp = <95000>;
-			clock-latency-ns = <400000>;
-			turbo-mode;
-		};
-	};
-};
-
-Example 4: Handling multiple regulators
-
-/ {
-	cpus {
-		cpu@0 {
-			compatible = "vendor,cpu-type";
-			...
-
-			vcc0-supply = <&cpu_supply0>;
-			vcc1-supply = <&cpu_supply1>;
-			vcc2-supply = <&cpu_supply2>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
-
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <970000>, /* Supply 0 */
-					<960000>, /* Supply 1 */
-					<960000>; /* Supply 2 */
-			opp-microamp =  <70000>,  /* Supply 0 */
-					<70000>,  /* Supply 1 */
-					<70000>;  /* Supply 2 */
-			clock-latency-ns = <300000>;
-		};
-
-		/* OR */
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
-					<965000 960000 975000>, /* Supply 1 */
-					<965000 960000 975000>; /* Supply 2 */
-			opp-microamp =  <70000>,		/* Supply 0 */
-					<70000>,		/* Supply 1 */
-					<70000>;		/* Supply 2 */
-			clock-latency-ns = <300000>;
-		};
-
-		/* OR */
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
-					<965000 960000 975000>, /* Supply 1 */
-					<965000 960000 975000>; /* Supply 2 */
-			opp-microamp =  <70000>,		/* Supply 0 */
-					<0>,			/* Supply 1 doesn't need this */
-					<70000>;		/* Supply 2 */
-			clock-latency-ns = <300000>;
-		};
-	};
-};
-
-Example 5: opp-supported-hw
-(example: three level hierarchy of versions: cuts, substrate and process)
-
-/ {
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			...
-
-			cpu-supply = <&cpu_supply>
-			operating-points-v2 = <&cpu0_opp_table_slow>;
-		};
-	};
-
-	opp_table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-600000000 {
-			/*
-			 * Supports all substrate and process versions for 0xF
-			 * cuts, i.e. only first four cuts.
-			 */
-			opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <915000 900000 925000>;
-			...
-		};
-
-		opp-800000000 {
-			/*
-			 * Supports:
-			 * - cuts: only one, 6th cut (represented by 6th bit).
-			 * - substrate: supports 16 different substrate versions
-			 * - process: supports 9 different process versions
-			 */
-			opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <915000 900000 925000>;
-			...
-		};
-	};
-};
-
-Example 6: opp-microvolt-<name>, opp-microamp-<name>:
-(example: device with two possible microvolt ranges: slow and fast)
-
-/ {
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			...
-
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
-
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt-slow = <915000 900000 925000>;
-			opp-microvolt-fast = <975000 970000 985000>;
-			opp-microamp-slow =  <70000>;
-			opp-microamp-fast =  <71000>;
-		};
-
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */
-					      <925000 910000 935000>; /* Supply vcc1 */
-			opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */
-					     <965000 960000 975000>; /* Supply vcc1 */
-			opp-microamp =  <70000>; /* Will be used for both slow/fast */
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
deleted file mode 100644
index 4751029b9b74..000000000000
--- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+++ /dev/null
@@ -1,795 +0,0 @@
-Qualcomm Technologies, Inc. NVMEM CPUFreq and OPP bindings
-===================================
-
-In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996,
-the CPU frequencies subset and voltage value of each OPP varies based on
-the silicon variant in use.
-Qualcomm Technologies, Inc. Process Voltage Scaling Tables
-defines the voltage and frequency value based on the msm-id in SMEM
-and speedbin blown in the efuse combination.
-The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC
-to provide the OPP framework with required information (existing HW bitmap).
-This is used to determine the voltage and frequency value for each OPP of
-operating-points-v2 table when it is parsed by the OPP framework.
-
-Required properties:
---------------------
-In 'cpu' nodes:
-- operating-points-v2: Phandle to the operating-points-v2 table to use.
-
-In 'operating-points-v2' table:
-- compatible: Should be
-	- 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
-
-Optional properties:
---------------------
-In 'cpu' nodes:
-- power-domains: A phandle pointing to the PM domain specifier which provides
-		the performance states available for active state management.
-		Please refer to the power-domains bindings
-		Documentation/devicetree/bindings/power/power_domain.txt
-		and also examples below.
-- power-domain-names: Should be
-	- 'cpr' for qcs404.
-
-In 'operating-points-v2' table:
-- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
-		efuse registers that has information about the
-		speedbin that is used to select the right frequency/voltage
-		value pair.
-		Please refer the for nvmem-cells
-		bindings Documentation/devicetree/bindings/nvmem/nvmem.txt
-		and also examples below.
-
-In every OPP node:
-- opp-supported-hw: A single 32 bit bitmap value, representing compatible HW.
-		    Bitmap:
-			0:	MSM8996 V3, speedbin 0
-			1:	MSM8996 V3, speedbin 1
-			2:	MSM8996 V3, speedbin 2
-			3:	unused
-			4:	MSM8996 SG, speedbin 0
-			5:	MSM8996 SG, speedbin 1
-			6:	MSM8996 SG, speedbin 2
-			7-31:	unused
-
-Example 1:
----------
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			clocks = <&kryocc 0>;
-			cpu-supply = <&pm8994_s11_saw>;
-			operating-points-v2 = <&cluster0_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			};
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			clocks = <&kryocc 0>;
-			cpu-supply = <&pm8994_s11_saw>;
-			operating-points-v2 = <&cluster0_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
-		};
-
-		CPU2: cpu@100 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x100>;
-			enable-method = "psci";
-			clocks = <&kryocc 1>;
-			cpu-supply = <&pm8994_s11_saw>;
-			operating-points-v2 = <&cluster1_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			};
-		};
-
-		CPU3: cpu@101 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x101>;
-			enable-method = "psci";
-			clocks = <&kryocc 1>;
-			cpu-supply = <&pm8994_s11_saw>;
-			operating-points-v2 = <&cluster1_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
-		};
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-
-				core1 {
-					cpu = <&CPU1>;
-				};
-			};
-
-			cluster1 {
-				core0 {
-					cpu = <&CPU2>;
-				};
-
-				core1 {
-					cpu = <&CPU3>;
-				};
-			};
-		};
-	};
-
-	cluster0_opp: opp_table0 {
-		compatible = "operating-points-v2-kryo-cpu";
-		nvmem-cells = <&speedbin_efuse>;
-		opp-shared;
-
-		opp-307200000 {
-			opp-hz = /bits/ 64 <307200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x77>;
-			clock-latency-ns = <200000>;
-		};
-		opp-384000000 {
-			opp-hz = /bits/ 64 <384000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-422400000 {
-			opp-hz = /bits/ 64 <422400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-460800000 {
-			opp-hz = /bits/ 64 <460800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-480000000 {
-			opp-hz = /bits/ 64 <480000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-537600000 {
-			opp-hz = /bits/ 64 <537600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-556800000 {
-			opp-hz = /bits/ 64 <556800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-614400000 {
-			opp-hz = /bits/ 64 <614400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-652800000 {
-			opp-hz = /bits/ 64 <652800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-691200000 {
-			opp-hz = /bits/ 64 <691200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-729600000 {
-			opp-hz = /bits/ 64 <729600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-768000000 {
-			opp-hz = /bits/ 64 <768000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-844800000 {
-			opp-hz = /bits/ 64 <844800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x77>;
-			clock-latency-ns = <200000>;
-		};
-		opp-902400000 {
-			opp-hz = /bits/ 64 <902400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-960000000 {
-			opp-hz = /bits/ 64 <960000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-979200000 {
-			opp-hz = /bits/ 64 <979200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1036800000 {
-			opp-hz = /bits/ 64 <1036800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1056000000 {
-			opp-hz = /bits/ 64 <1056000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1113600000 {
-			opp-hz = /bits/ 64 <1113600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1132800000 {
-			opp-hz = /bits/ 64 <1132800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1190400000 {
-			opp-hz = /bits/ 64 <1190400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1209600000 {
-			opp-hz = /bits/ 64 <1209600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1228800000 {
-			opp-hz = /bits/ 64 <1228800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1286400000 {
-			opp-hz = /bits/ 64 <1286400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1324800000 {
-			opp-hz = /bits/ 64 <1324800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x5>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1363200000 {
-			opp-hz = /bits/ 64 <1363200000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x72>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1401600000 {
-			opp-hz = /bits/ 64 <1401600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x5>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1440000000 {
-			opp-hz = /bits/ 64 <1440000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1478400000 {
-			opp-hz = /bits/ 64 <1478400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1497600000 {
-			opp-hz = /bits/ 64 <1497600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x4>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1516800000 {
-			opp-hz = /bits/ 64 <1516800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1593600000 {
-			opp-hz = /bits/ 64 <1593600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x71>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1996800000 {
-			opp-hz = /bits/ 64 <1996800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x20>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2188800000 {
-			opp-hz = /bits/ 64 <2188800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x10>;
-			clock-latency-ns = <200000>;
-		};
-	};
-
-	cluster1_opp: opp_table1 {
-		compatible = "operating-points-v2-kryo-cpu";
-		nvmem-cells = <&speedbin_efuse>;
-		opp-shared;
-
-		opp-307200000 {
-			opp-hz = /bits/ 64 <307200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x77>;
-			clock-latency-ns = <200000>;
-		};
-		opp-384000000 {
-			opp-hz = /bits/ 64 <384000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-403200000 {
-			opp-hz = /bits/ 64 <403200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-460800000 {
-			opp-hz = /bits/ 64 <460800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-480000000 {
-			opp-hz = /bits/ 64 <480000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-537600000 {
-			opp-hz = /bits/ 64 <537600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-556800000 {
-			opp-hz = /bits/ 64 <556800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-614400000 {
-			opp-hz = /bits/ 64 <614400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-652800000 {
-			opp-hz = /bits/ 64 <652800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-691200000 {
-			opp-hz = /bits/ 64 <691200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-729600000 {
-			opp-hz = /bits/ 64 <729600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-748800000 {
-			opp-hz = /bits/ 64 <748800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-806400000 {
-			opp-hz = /bits/ 64 <806400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-825600000 {
-			opp-hz = /bits/ 64 <825600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-883200000 {
-			opp-hz = /bits/ 64 <883200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-902400000 {
-			opp-hz = /bits/ 64 <902400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-940800000 {
-			opp-hz = /bits/ 64 <940800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-979200000 {
-			opp-hz = /bits/ 64 <979200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1036800000 {
-			opp-hz = /bits/ 64 <1036800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1056000000 {
-			opp-hz = /bits/ 64 <1056000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1113600000 {
-			opp-hz = /bits/ 64 <1113600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1132800000 {
-			opp-hz = /bits/ 64 <1132800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1190400000 {
-			opp-hz = /bits/ 64 <1190400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1209600000 {
-			opp-hz = /bits/ 64 <1209600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1248000000 {
-			opp-hz = /bits/ 64 <1248000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1286400000 {
-			opp-hz = /bits/ 64 <1286400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1324800000 {
-			opp-hz = /bits/ 64 <1324800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1363200000 {
-			opp-hz = /bits/ 64 <1363200000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1401600000 {
-			opp-hz = /bits/ 64 <1401600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1440000000 {
-			opp-hz = /bits/ 64 <1440000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1478400000 {
-			opp-hz = /bits/ 64 <1478400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1516800000 {
-			opp-hz = /bits/ 64 <1516800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1555200000 {
-			opp-hz = /bits/ 64 <1555200000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1593600000 {
-			opp-hz = /bits/ 64 <1593600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1632000000 {
-			opp-hz = /bits/ 64 <1632000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1670400000 {
-			opp-hz = /bits/ 64 <1670400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1708800000 {
-			opp-hz = /bits/ 64 <1708800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1747200000 {
-			opp-hz = /bits/ 64 <1747200000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1785600000 {
-			opp-hz = /bits/ 64 <1785600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1804800000 {
-			opp-hz = /bits/ 64 <1804800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x6>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1824000000 {
-			opp-hz = /bits/ 64 <1824000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x71>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1900800000 {
-			opp-hz = /bits/ 64 <1900800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x74>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1920000000 {
-			opp-hz = /bits/ 64 <1920000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1977600000 {
-			opp-hz = /bits/ 64 <1977600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x30>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1996800000 {
-			opp-hz = /bits/ 64 <1996800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2054400000 {
-			opp-hz = /bits/ 64 <2054400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x30>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2073600000 {
-			opp-hz = /bits/ 64 <2073600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2150400000 {
-			opp-hz = /bits/ 64 <2150400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x31>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2246400000 {
-			opp-hz = /bits/ 64 <2246400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x10>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2342400000 {
-			opp-hz = /bits/ 64 <2342400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x10>;
-			clock-latency-ns = <200000>;
-		};
-	};
-
-....
-
-reserved-memory {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-....
-	smem_mem: smem-mem@86000000 {
-		reg = <0x0 0x86000000 0x0 0x200000>;
-		no-map;
-	};
-....
-};
-
-smem {
-	compatible = "qcom,smem";
-	memory-region = <&smem_mem>;
-	hwlocks = <&tcsr_mutex 3>;
-};
-
-soc {
-....
-	qfprom: qfprom@74000 {
-		compatible = "qcom,qfprom";
-		reg = <0x00074000 0x8ff>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		....
-		speedbin_efuse: speedbin@133 {
-			reg = <0x133 0x1>;
-			bits = <5 3>;
-		};
-	};
-};
-
-Example 2:
----------
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CPU0: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x100>;
-			....
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-
-		CPU1: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x101>;
-			....
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-
-		CPU2: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x102>;
-			....
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-
-		CPU3: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x103>;
-			....
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-	};
-
-	cpu_opp_table: cpu-opp-table {
-		compatible = "operating-points-v2-kryo-cpu";
-		opp-shared;
-
-		opp-1094400000 {
-			opp-hz = /bits/ 64 <1094400000>;
-			required-opps = <&cpr_opp1>;
-		};
-		opp-1248000000 {
-			opp-hz = /bits/ 64 <1248000000>;
-			required-opps = <&cpr_opp2>;
-		};
-		opp-1401600000 {
-			opp-hz = /bits/ 64 <1401600000>;
-			required-opps = <&cpr_opp3>;
-		};
-	};
-
-	cpr_opp_table: cpr-opp-table {
-		compatible = "operating-points-v2-qcom-level";
-
-		cpr_opp1: opp1 {
-			opp-level = <1>;
-			qcom,opp-fuse-level = <1>;
-		};
-		cpr_opp2: opp2 {
-			opp-level = <2>;
-			qcom,opp-fuse-level = <2>;
-		};
-		cpr_opp3: opp3 {
-			opp-level = <3>;
-			qcom,opp-fuse-level = <3>;
-		};
-	};
-
-....
-
-soc {
-....
-	cpr: power-controller@b018000 {
-		compatible = "qcom,qcs404-cpr", "qcom,cpr";
-		reg = <0x0b018000 0x1000>;
-		....
-		vdd-apc-supply = <&pms405_s3>;
-		#power-domain-cells = <0>;
-		operating-points-v2 = <&cpr_opp_table>;
-		....
-	};
-};
diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt
deleted file mode 100644
index 32eb0793c7e6..000000000000
--- a/Documentation/devicetree/bindings/opp/qcom-opp.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Qualcomm OPP bindings to describe OPP nodes
-
-The bindings are based on top of the operating-points-v2 bindings
-described in Documentation/devicetree/bindings/opp/opp.txt
-Additional properties are described below.
-
-* OPP Table Node
-
-Required properties:
-- compatible: Allow OPPs to express their compatibility. It should be:
-  "operating-points-v2-qcom-level"
-
-* OPP Node
-
-Required properties:
-- qcom,opp-fuse-level: A positive value representing the fuse corner/level
-  associated with this OPP node. Sometimes several corners/levels shares
-  a certain fuse corner/level. A fuse corner/level contains e.g. ref uV,
-  min uV, and max uV.
diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt
index 832346e489a3..b70d326117cd 100644
--- a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt
+++ b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt
@@ -13,7 +13,7 @@ regulators to the device that will undergo OPP transitions we can make use
 of the multi regulator binding that is part of the OPP core described here [1]
 to describe both regulators needed by the platform.
 
-[1] Documentation/devicetree/bindings/opp/opp.txt
+[1] Documentation/devicetree/bindings/opp/opp-v2.yaml
 
 Required Properties for Device Node:
 - vdd-supply: phandle to regulator controlling VDD supply
diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
index 310ef7145c47..2b8ca920a7fa 100644
--- a/Documentation/devicetree/bindings/pci/aardvark-pci.txt
+++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
@@ -19,6 +19,9 @@ contain the following properties:
  - interrupt-map-mask and interrupt-map: standard PCI properties to
    define the mapping of the PCIe interface to interrupt numbers.
  - bus-range: PCI bus numbers covered
+ - phys: the PCIe PHY handle
+ - max-link-speed: see pci.txt
+ - reset-gpios: see pci.txt
 
 In addition, the Device Tree describing an Aardvark PCIe controller
 must include a sub-node that describes the legacy interrupt controller
@@ -48,6 +51,7 @@ Example:
 				<0 0 0 2 &pcie_intc 1>,
 				<0 0 0 3 &pcie_intc 2>,
 				<0 0 0 4 &pcie_intc 3>;
+		phys = <&comphy1 0>;
 		pcie_intc: interrupt-controller {
 			interrupt-controller;
 			#interrupt-cells = <1>;
diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
index 84fdc422792e..c3a75ac6e59d 100644
--- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
@@ -3,7 +3,7 @@ Amlogic Meson AXG DWC PCIE SoC controller
 Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
 It shares common functions with the PCIe DesignWare core driver and
 inherits common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt.
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
 
 Additional properties are described here:
 
@@ -18,7 +18,6 @@ Required properties:
 - reg-names: Must be
 	- "elbi"	External local bus interface registers
 	- "cfg"		Meson specific registers
-	- "phy"		Meson PCIE PHY registers for AXG SoC Family
 	- "config"	PCIe configuration space
 - reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
 - clocks: Must contain an entry for each entry in clock-names.
@@ -26,15 +25,15 @@ Required properties:
 	- "pclk"       PCIe GEN 100M PLL clock
 	- "port"       PCIe_x(A or B) RC clock gate
 	- "general"    PCIe Phy clock
-	- "mipi"       PCIe_x(A or B) 100M ref clock gate for AXG SoC Family
 - resets: phandle to the reset lines.
-- reset-names: must contain "phy" "port" and "apb"
-       - "phy"         Share PHY reset for AXG SoC Family
+- reset-names: must contain "port" and "apb"
        - "port"        Port A or B reset
        - "apb"         Share APB reset
-- phys: should contain a phandle to the shared phy for G12A SoC Family
+- phys: should contain a phandle to the PCIE phy
+- phy-names: must contain "pcie"
+
 - device_type:
-	should be "pci". As specified in designware-pcie.txt
+	should be "pci". As specified in snps,dw-pcie.yaml
 
 
 Example configuration:
@@ -43,9 +42,8 @@ Example configuration:
 			compatible = "amlogic,axg-pcie", "snps,dw-pcie";
 			reg = <0x0 0xf9800000 0x0 0x400000
 					0x0 0xff646000 0x0 0x2000
-					0x0 0xff644000 0x0 0x2000
 					0x0 0xf9f00000 0x0 0x100000>;
-			reg-names = "elbi", "cfg", "phy", "config";
+			reg-names = "elbi", "cfg", "config";
 			reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
 			#interrupt-cells = <1>;
@@ -58,17 +56,15 @@ Example configuration:
 			ranges = <0x82000000 0 0 0x0 0xf9c00000 0 0x00300000>;
 
 			clocks = <&clkc CLKID_USB
-					&clkc CLKID_MIPI_ENABLE
 					&clkc CLKID_PCIE_A
 					&clkc CLKID_PCIE_CML_EN0>;
 			clock-names = "general",
-					"mipi",
 					"pclk",
 					"port";
-			resets = <&reset RESET_PCIE_PHY>,
-				<&reset RESET_PCIE_A>,
+			resets = <&reset RESET_PCIE_A>,
 				<&reset RESET_PCIE_APB>;
-			reset-names = "phy",
-					"port",
+			reset-names = "port",
 					"apb";
+			phys = <&pcie_phy>;
+			phy-names = "pcie";
 	};
diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
new file mode 100644
index 000000000000..aa38680aaaca
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/apple,pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple PCIe host controller
+
+maintainers:
+  - Mark Kettenis <kettenis@openbsd.org>
+
+description: |
+  The Apple PCIe host controller is a PCIe host controller with
+  multiple root ports present in Apple ARM SoC platforms, including
+  various iPhone and iPad devices and the "Apple Silicon" Macs.
+  The controller incorporates Synopsys DesigWare PCIe logic to
+  implements its root ports.  But the ATU found on most DesignWare
+  PCIe host bridges is absent.
+
+  All root ports share a single ECAM space, but separate GPIOs are
+  used to take the PCI devices on those ports out of reset.  Therefore
+  the standard "reset-gpios" and "max-link-speed" properties appear on
+  the child nodes that represent the PCI bridges that correspond to
+  the individual root ports.
+
+  MSIs are handled by the PCIe controller and translated into regular
+  interrupts.  A range of 32 MSIs is provided.  These 32 MSIs can be
+  distributed over the root ports as the OS sees fit by programming
+  the PCIe controller's port registers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-pcie
+          - apple,t6000-pcie
+      - const: apple,pcie
+
+  reg:
+    minItems: 3
+    maxItems: 6
+
+  reg-names:
+    minItems: 3
+    items:
+      - const: config
+      - const: rc
+      - const: port0
+      - const: port1
+      - const: port2
+      - const: port3
+
+  ranges:
+    minItems: 2
+    maxItems: 2
+
+  interrupts:
+    description:
+      Interrupt specifiers, one for each root port.
+    minItems: 1
+    maxItems: 4
+
+  msi-parent: true
+
+  msi-ranges:
+    maxItems: 1
+
+  iommu-map: true
+  iommu-map-mask: true
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - bus-range
+  - interrupts
+  - msi-controller
+  - msi-parent
+  - msi-ranges
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: apple,t8103-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 5
+        interrupts:
+          maxItems: 3
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie0: pcie@690000000 {
+        compatible = "apple,t8103-pcie", "apple,pcie";
+        device_type = "pci";
+
+        reg = <0x6 0x90000000 0x0 0x1000000>,
+              <0x6 0x80000000 0x0 0x100000>,
+              <0x6 0x81000000 0x0 0x4000>,
+              <0x6 0x82000000 0x0 0x4000>,
+              <0x6 0x83000000 0x0 0x4000>;
+        reg-names = "config", "rc", "port0", "port1", "port2";
+
+        interrupt-parent = <&aic>;
+        interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>;
+
+        msi-controller;
+        msi-parent = <&pcie0>;
+        msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>;
+
+        iommu-map = <0x100 &dart0 1 1>,
+                    <0x200 &dart1 1 1>,
+                    <0x300 &dart2 1 1>;
+        iommu-map-mask = <0xff00>;
+
+        bus-range = <0 3>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
+                 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
+
+        power-domains = <&ps_apcie_gp>;
+        pinctrl-0 = <&pcie_pins>;
+        pinctrl-names = "default";
+
+        pci@0,0 {
+          device_type = "pci";
+          reg = <0x0 0x0 0x0 0x0 0x0>;
+          reset-gpios = <&pinctrl_ap 152 0>;
+
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+        };
+
+        pci@1,0 {
+          device_type = "pci";
+          reg = <0x800 0x0 0x0 0x0 0x0>;
+          reset-gpios = <&pinctrl_ap 153 0>;
+
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+        };
+
+        pci@2,0 {
+          device_type = "pci";
+          reg = <0x1000 0x0 0x0 0x0 0x0>;
+          reset-gpios = <&pinctrl_ap 33 0>;
+
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
index 979dc7b6cfe8..cc6dcdb676b9 100644
--- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -1,7 +1,7 @@
 * Axis ARTPEC-6 PCIe interface
 
 This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in designware-pcie.txt.
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
 Required properties:
 - compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode;
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
deleted file mode 100644
index df065aa53a83..000000000000
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ /dev/null
@@ -1,133 +0,0 @@
-* Broadcom iProc PCIe controller with the platform bus interface
-
-Required properties:
-- compatible:
-      "brcm,iproc-pcie" for the first generation of PAXB based controller,
-used in SoCs including NSP, Cygnus, NS2, and Pegasus
-      "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based
-controllers, used in Stingray
-      "brcm,iproc-pcie-paxc" for the first generation of PAXC based
-controller, used in NS2
-      "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based
-controller, used in Stingray
-  PAXB-based root complex is used for external endpoint devices. PAXC-based
-root complex is connected to emulated endpoint devices internal to the ASIC
-- reg: base address and length of the PCIe controller I/O register space
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map, standard PCI properties to define the
-  mapping of the PCIe interface to interrupt numbers
-- linux,pci-domain: PCI domain ID. Should be unique for each host controller
-- bus-range: PCI bus numbers covered
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- device_type: set to "pci"
-- ranges: ranges for the PCI memory and I/O regions
-
-Optional properties:
-- phys: phandle of the PCIe PHY device
-- phy-names: must be "pcie-phy"
-- dma-coherent: present if DMA operations are coherent
-- dma-ranges: Some PAXB-based root complexes do not have inbound mapping done
-  by the ASIC after power on reset.  In this case, SW is required to configure
-the mapping, based on inbound memory regions specified by this property.
-
-- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done
-by the ASIC after power on reset. In this case, SW needs to configure it
-
-If the brcm,pcie-ob property is present, the following properties become
-effective:
-
-Required:
-- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal
-address used by the iProc PCIe core (not the PCIe address)
-
-MSI support (optional):
-
-For older platforms without MSI integrated in the GIC, iProc PCIe core provides
-an event queue based MSI support.  The iProc MSI uses host memories to store
-MSI posted writes in the event queues
-
-On newer iProc platforms, gicv2m or gicv3-its based MSI support should be used
-
-- msi-map: Maps a Requester ID to an MSI controller and associated MSI
-sideband data
-
-- msi-parent: Link to the device node of the MSI controller, used when no MSI
-sideband data is passed between the iProc PCIe controller and the MSI
-controller
-
-Refer to the following binding documents for more detailed description on
-the use of 'msi-map' and 'msi-parent':
-  Documentation/devicetree/bindings/pci/pci-msi.txt
-  Documentation/devicetree/bindings/interrupt-controller/msi.txt
-
-When the iProc event queue based MSI is used, one needs to define the
-following properties in the MSI device node:
-- compatible: Must be "brcm,iproc-msi"
-- msi-controller: claims itself as an MSI controller
-- interrupts: List of interrupt IDs from its parent interrupt device
-
-Optional properties:
-- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
-require the interrupt enable registers to be set explicitly to enable MSI
-
-Example:
-	pcie0: pcie@18012000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18012000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
-
-		linux,pci-domain = <0>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-			  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
-
-		phys = <&phy 0 5>;
-		phy-names = "pcie-phy";
-
-		brcm,pcie-ob;
-		brcm,pcie-ob-axi-offset = <0x00000000>;
-
-		msi-parent = <&msi0>;
-
-		/* iProc event queue based MSI */
-		msi0: msi@18012000 {
-			compatible = "brcm,iproc-msi";
-			msi-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
-				     <GIC_SPI 97 IRQ_TYPE_NONE>,
-				     <GIC_SPI 98 IRQ_TYPE_NONE>,
-				     <GIC_SPI 99 IRQ_TYPE_NONE>,
-		};
-	};
-
-	pcie1: pcie@18013000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18013000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
-
-		linux,pci-domain = <1>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-			  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
-
-		phys = <&phy 1 6>;
-		phy-names = "pcie-phy";
-	};
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
new file mode 100644
index 000000000000..0972868735fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc PCIe controller with the platform bus interface
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # for the first generation of PAXB based controller, used in SoCs
+          # including NSP, Cygnus, NS2, and Pegasus
+          - brcm,iproc-pcie
+          # for the second generation of PAXB-based controllers, used in
+          # Stingray
+          - brcm,iproc-pcie-paxb-v2
+          # For the first generation of PAXC based controller, used in NS2
+          - brcm,iproc-pcie-paxc
+          # For the second generation of PAXC based controller, used in Stingray
+          - brcm,iproc-pcie-paxc-v2
+
+  reg:
+    maxItems: 1
+    description: >
+       Base address and length of the PCIe controller I/O register space
+
+  interrupt-map: true
+
+  interrupt-map-mask: true
+
+  "#interrupt-cells":
+    const: 1
+
+  ranges:
+    minItems: 1
+    maxItems: 2
+    description: >
+      Ranges for the PCI memory and I/O regions
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pcie-phy
+
+  bus-range: true
+
+  dma-coherent: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  device_type: true
+
+  brcm,pcie-ob:
+    type: boolean
+    description: >
+      Some iProc SoCs do not have the outbound address mapping done by the
+      ASIC after power on reset. In this case, SW needs to configure it
+
+  brcm,pcie-ob-axi-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+       The offset from the AXI address to the internal address used by the
+       iProc PCIe core (not the PCIe address)
+
+  msi:
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: brcm,iproc-msi
+
+  msi-parent: true
+
+  msi-controller: true
+
+  brcm,pcie-msi-inten:
+    type: boolean
+    description: >
+      Needs to be present for some older iProc platforms that require the
+      interrupt enable registers to be set explicitly to enable MSI
+
+dependencies:
+  brcm,pcie-ob-axi-offset: ["brcm,pcie-ob"]
+  brcm,pcie-msi-inten: [msi-controller]
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,iproc-pcie
+then:
+  required:
+    - interrupt-map
+    - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+   bus {
+      #address-cells = <1>;
+      #size-cells = <1>;
+           pcie0: pcie@18012000 {
+              compatible = "brcm,iproc-pcie";
+              reg = <0x18012000 0x1000>;
+
+              #interrupt-cells = <1>;
+              interrupt-map-mask = <0 0 0 0>;
+              interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+              linux,pci-domain = <0>;
+
+              bus-range = <0x00 0xff>;
+
+              #address-cells = <3>;
+              #size-cells = <2>;
+              device_type = "pci";
+              ranges = <0x81000000 0 0     0x28000000 0 0x00010000>,
+                   <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+              phys = <&phy 0 5>;
+              phy-names = "pcie-phy";
+
+              brcm,pcie-ob;
+              brcm,pcie-ob-axi-offset = <0x00000000>;
+
+              msi-parent = <&msi0>;
+
+              /* iProc event queue based MSI */
+              msi0: msi {
+                 compatible = "brcm,iproc-msi";
+                 msi-controller;
+                 interrupt-parent = <&gic>;
+                 interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+                         <GIC_SPI 97 IRQ_TYPE_NONE>,
+                         <GIC_SPI 98 IRQ_TYPE_NONE>,
+                         <GIC_SPI 99 IRQ_TYPE_NONE>;
+              };
+           };
+
+           pcie1: pcie@18013000 {
+              compatible = "brcm,iproc-pcie";
+              reg = <0x18013000 0x1000>;
+
+              #interrupt-cells = <1>;
+              interrupt-map-mask = <0 0 0 0>;
+              interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+              linux,pci-domain = <1>;
+
+              bus-range = <0x00 0xff>;
+
+              #address-cells = <3>;
+              #size-cells = <2>;
+              device_type = "pci";
+              ranges = <0x81000000 0 0     0x48000000 0 0x00010000>,
+                   <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+              phys = <&phy 1 6>;
+              phy-names = "pcie-phy";
+           };
+    };
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 77d3e81a437b..7e15aae7d69e 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -4,40 +4,46 @@
 $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Brcmstb PCIe Host Controller Device Tree Bindings
+title: Brcmstb PCIe Host Controller
 
 maintainers:
   - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
 
-allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
-
 properties:
   compatible:
-    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+    items:
+      - enum:
+          - brcm,bcm2711-pcie # The Raspberry Pi 4
+          - brcm,bcm4908-pcie
+          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
+          - brcm,bcm7278-pcie # Broadcom 7278 Arm
+          - brcm,bcm7216-pcie # Broadcom 7216 Arm
+          - brcm,bcm7445-pcie # Broadcom 7445 Arm
+          - brcm,bcm7425-pcie # Broadcom 7425 MIPs
+          - brcm,bcm7435-pcie # Broadcom 7435 MIPs
 
   reg:
     maxItems: 1
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: PCIe host controller
       - description: builtin MSI controller
 
   interrupt-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: pcie
       - const: msi
 
   ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
 
   dma-ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 6
 
   clocks:
     maxItems: 1
@@ -56,8 +62,25 @@ properties:
     description: Indicates usage of spread-spectrum clocking.
     type: boolean
 
+  aspm-no-l0s: true
+
+  brcm,scb-sizes:
+    description: u64 giving the 64bit PCIe memory
+      viewport size of a memory controller.  There may be up to
+      three controllers, and each size must be a power of two
+      with a size greater or equal to the amount of memory the
+      controller supports.  Note that each memory controller
+      may have two component regions -- base and extended -- so
+      this information cannot be deduced from the dma-ranges.
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    items:
+      minItems: 1
+      maxItems: 3
+
 required:
+  - compatible
   - reg
+  - ranges
   - dma-ranges
   - "#interrupt-cells"
   - interrupts
@@ -66,6 +89,46 @@ required:
   - interrupt-map
   - msi-controller
 
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm4908-pcie
+    then:
+      properties:
+        resets:
+          items:
+            - description: reset controller handling the PERST# signal
+
+        reset-names:
+          items:
+            - const: perst
+
+      required:
+        - resets
+        - reset-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7216-pcie
+    then:
+      properties:
+        resets:
+          items:
+            - description: phandle pointing to the RESCAL reset controller
+
+        reset-names:
+          items:
+            - const: rescal
+
+      required:
+        - resets
+        - reset-names
+
 unevaluatedProperties: false
 
 examples:
@@ -83,15 +146,40 @@ examples:
                     #address-cells = <3>;
                     #size-cells = <2>;
                     #interrupt-cells = <1>;
-                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                    interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
                                  <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
                     interrupt-names = "pcie", "msi";
                     interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
                     msi-parent = <&pcie0>;
                     msi-controller;
                     ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
-                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
                     brcm,enable-ssc;
+                    brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
+
+                    /* PCIe bridge, Root Port */
+                    pci@0,0 {
+                            #address-cells = <3>;
+                            #size-cells = <2>;
+                            reg = <0x0 0x0 0x0 0x0 0x0>;
+                            compatible = "pciclass,0604";
+                            device_type = "pci";
+                            vpcie3v3-supply = <&vreg7>;
+                            ranges;
+
+                            /* PCIe endpoint */
+                            pci-ep@0,0 {
+                                    assigned-addresses =
+                                        <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+                                    reg = <0x0 0x0 0x0 0x0 0x0>;
+                                    compatible = "pci14e4,1688";
+                            };
+                    };
             };
     };
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
deleted file mode 100644
index 4a0475e2ba7e..000000000000
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Cadence PCIe endpoint controller
-
-Required properties:
-- compatible: Should contain "cdns,cdns-pcie-ep" to identify the IP used.
-- reg: Should contain the controller register base address and AXI interface
-  region base address respectively.
-- reg-names: Must be "reg" and "mem" respectively.
-- cdns,max-outbound-regions: Set to maximum number of outbound regions
-
-Optional properties:
-- max-functions: Maximum number of functions that can be configured (default 1).
-- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
-  than one in the list.  If only one PHY listed it must manage all lanes. 
-- phy-names:  List of names to identify the PHY.
-
-Example:
-
-pcie@fc000000 {
-	compatible = "cdns,cdns-pcie-ep";
-	reg = <0x0 0xfc000000 0x0 0x01000000>,
-	      <0x0 0x80000000 0x0 0x40000000>;
-	reg-names = "reg", "mem";
-	cdns,max-outbound-regions = <16>;
-	max-functions = /bits/ 8 <8>;
-	phys = <&ep_phy0 &ep_phy1>;
-	phy-names = "pcie-lane0","pcie-lane1";
-};
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
new file mode 100644
index 000000000000..e6ef1012a580
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe EP Controller
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: "cdns-pcie-ep.yaml#"
+
+properties:
+  compatible:
+    const: cdns,cdns-pcie-ep
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: reg
+      - const: mem
+
+required:
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie-ep@fc000000 {
+                compatible = "cdns,cdns-pcie-ep";
+                reg = <0x0 0xfc000000 0x0 0x01000000>,
+                      <0x0 0x80000000 0x0 0x40000000>;
+                reg-names = "reg", "mem";
+                cdns,max-outbound-regions = <16>;
+                max-functions = /bits/ 8 <8>;
+                phys = <&pcie_phy0>;
+                phy-names = "pcie-phy";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
deleted file mode 100644
index 91de69c713a9..000000000000
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* Cadence PCIe host controller
-
-This PCIe controller inherits the base properties defined in
-host-generic-pci.txt.
-
-Required properties:
-- compatible: Should contain "cdns,cdns-pcie-host" to identify the IP used.
-- reg: Should contain the controller register base address, PCIe configuration
-  window base address, and AXI interface region base address respectively.
-- reg-names: Must be "reg", "cfg" and "mem" respectively.
-- #address-cells: Set to <3>
-- #size-cells: Set to <2>
-- device_type: Set to "pci"
-- ranges: Ranges for the PCI memory and I/O regions
-- #interrupt-cells: Set to <1>
-- interrupt-map-mask and interrupt-map: Standard PCI properties to define the
-  mapping of the PCIe interface to interrupt numbers.
-
-Optional properties:
-- cdns,max-outbound-regions: Set to maximum number of outbound regions
-  (default 32)
-- cdns,no-bar-match-nbits: Set into the no BAR match register to configure the
-  number of least significant bits kept during inbound (PCIe -> AXI) address
-  translations (default 32)
-- vendor-id: The PCI vendor ID (16 bits, default is design dependent)
-- device-id: The PCI device ID (16 bits, default is design dependent)
-- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
-  than one in the list.  If only one PHY listed it must manage all lanes. 
-- phy-names:  List of names to identify the PHY.
-
-Example:
-
-pcie@fb000000 {
-	compatible = "cdns,cdns-pcie-host";
-	device_type = "pci";
-	#address-cells = <3>;
-	#size-cells = <2>;
-	bus-range = <0x0 0xff>;
-	linux,pci-domain = <0>;
-	cdns,max-outbound-regions = <16>;
-	cdns,no-bar-match-nbits = <32>;
-	vendor-id = /bits/ 16 <0x17cd>;
-	device-id = /bits/ 16 <0x0200>;
-
-	reg = <0x0 0xfb000000  0x0 0x01000000>,
-	      <0x0 0x41000000  0x0 0x00001000>,
-	      <0x0 0x40000000  0x0 0x04000000>;
-	reg-names = "reg", "cfg", "mem";
-
-	ranges = <0x02000000 0x0 0x42000000  0x0 0x42000000  0x0 0x1000000>,
-		 <0x01000000 0x0 0x43000000  0x0 0x43000000  0x0 0x0010000>;
-
-	#interrupt-cells = <0x1>;
-
-	interrupt-map = <0x0 0x0 0x0  0x1  &gic  0x0 0x0 0x0 14 0x1
-			 0x0 0x0 0x0  0x2  &gic  0x0 0x0 0x0 15 0x1
-			 0x0 0x0 0x0  0x3  &gic  0x0 0x0 0x0 16 0x1
-			 0x0 0x0 0x0  0x4  &gic  0x0 0x0 0x0 17 0x1>;
-
-	interrupt-map-mask = <0x0 0x0 0x0  0x7>;
-
-	msi-parent = <&its_pci>;
-
-	phys = <&pcie_phy0>;
-	phy-names = "pcie-phy";
-};
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
new file mode 100644
index 000000000000..293b8ec318bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe host controller
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: "cdns-pcie-host.yaml#"
+
+properties:
+  compatible:
+    const: cdns,cdns-pcie-host
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: reg
+      - const: cfg
+
+  msi-parent: true
+
+required:
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@fb000000 {
+            compatible = "cdns,cdns-pcie-host";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x0 0xff>;
+            linux,pci-domain = <0>;
+            vendor-id = <0x17cd>;
+            device-id = <0x0200>;
+
+            reg = <0x0 0xfb000000  0x0 0x01000000>,
+                  <0x0 0x41000000  0x0 0x00001000>;
+            reg-names = "reg", "cfg";
+
+            ranges = <0x02000000 0x0 0x42000000  0x0 0x42000000  0x0 0x1000000>,
+                     <0x01000000 0x0 0x43000000  0x0 0x43000000  0x0 0x0010000>;
+            dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+            #interrupt-cells = <0x1>;
+
+            interrupt-map = <0x0 0x0 0x0  0x1  &gic  0x0 0x0 0x0 14 0x1>,
+                 <0x0 0x0 0x0  0x2  &gic  0x0 0x0 0x0 15 0x1>,
+                 <0x0 0x0 0x0  0x3  &gic  0x0 0x0 0x0 16 0x1>,
+                 <0x0 0x0 0x0  0x4  &gic  0x0 0x0 0x0 17 0x1>;
+
+            interrupt-map-mask = <0x0 0x0 0x0  0x7>;
+
+            msi-parent = <&its_pci>;
+
+            phys = <&pcie_phy0>;
+            phy-names = "pcie-phy";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
new file mode 100644
index 000000000000..baeafda36ebe
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence PCIe Device
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: "cdns-pcie.yaml#"
+  - $ref: "pci-ep.yaml#"
+
+properties:
+  cdns,max-outbound-regions:
+    description: maximum number of outbound regions
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    default: 32
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
new file mode 100644
index 000000000000..a944f9bfffff
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence PCIe Host
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: "/schemas/pci/pci-bus.yaml#"
+  - $ref: "cdns-pcie.yaml#"
+
+properties:
+  cdns,max-outbound-regions:
+    description: maximum number of outbound regions
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    default: 32
+    deprecated: true
+
+  cdns,no-bar-match-nbits:
+    description:
+      Set into the no BAR match register to configure the number of least
+      significant bits kept during inbound (PCIe -> AXI) address translations
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 64
+    default: 32
+    deprecated: true
+
+  msi-parent: true
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
new file mode 100644
index 000000000000..df4fe28222b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/cdns-pcie.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence PCIe Core
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+properties:
+  phys:
+    description:
+      One per lane if more than one in the list. If only one PHY listed it must
+      manage all lanes.
+    minItems: 1
+    maxItems: 16
+
+  phy-names:
+    items:
+      - const: pcie-phy
+    # FIXME: names when more than 1
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
deleted file mode 100644
index 78494c4050f7..000000000000
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Synopsys DesignWare PCIe interface
-
-Required properties:
-- compatible:
-	"snps,dw-pcie" for RC mode;
-	"snps,dw-pcie-ep" for EP mode;
-- reg: For designware cores version < 4.80 contains the configuration
-       address space. For designware core version >= 4.80, contains
-       the configuration and ATU address space
-- reg-names: Must be "config" for the PCIe configuration space and "atu" for
-	     the ATU address space.
-    (The old way of getting the configuration address space from "ranges"
-    is deprecated and should be avoided.)
-RC mode:
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- device_type: set to "pci"
-- ranges: ranges for the PCI memory and I/O regions
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map: standard PCI
-	properties to define the mapping of the PCIe interface to interrupt
-	numbers.
-EP mode:
-- num-ib-windows: number of inbound address translation windows
-- num-ob-windows: number of outbound address translation windows
-
-Optional properties:
-- num-lanes: number of lanes to use (this property should be specified unless
-  the link is brought already up in BIOS)
-- reset-gpio: GPIO pin number of power good signal
-- clocks: Must contain an entry for each entry in clock-names.
-	See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-	- "pcie"
-	- "pcie_bus"
-- snps,enable-cdm-check: This is a boolean property and if present enables
-   automatic checking of CDM (Configuration Dependent Module) registers
-   for data corruption. CDM registers include standard PCIe configuration
-   space registers, Port Logic registers, DMA and iATU (internal Address
-   Translation Unit) registers.
-RC mode:
-- num-viewport: number of view ports configured in hardware. If a platform
-  does not specify it, the driver assumes 2.
-- bus-range: PCI bus numbers covered (it is recommended for new devicetrees
-  to specify this property, to keep backwards compatibility a range of
-  0x00-0xff is assumed if not present)
-
-EP mode:
-- max-functions: maximum number of functions that can be configured
-
-Example configuration:
-
-	pcie: pcie@dfc00000 {
-		compatible = "snps,dw-pcie";
-		reg = <0xdfc00000 0x0001000>, /* IP registers */
-		      <0xd0000000 0x0002000>; /* Configuration space */
-		reg-names = "dbi", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000
-			  0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
-		interrupts = <25>, <24>;
-		#interrupt-cells = <1>;
-		num-lanes = <1>;
-	};
-or
-	pcie: pcie@dfc00000 {
-		compatible = "snps,dw-pcie-ep";
-		reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
-		      <0xdfc01000 0x0001000>, /* IP registers 2 */
-		      <0xd0000000 0x2000000>; /* Configuration space */
-		reg-names = "dbi", "dbi2", "addr_space";
-		num-ib-windows = <6>;
-		num-ob-windows = <2>;
-		num-lanes = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
deleted file mode 100644
index 5f8cb4962f8d..000000000000
--- a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-Faraday Technology FTPCI100 PCI Host Bridge
-
-This PCI bridge is found inside that Cortina Systems Gemini SoC platform and
-is a generic IP block from Faraday Technology. It exists in two variants:
-plain and dual PCI. The plain version embeds a cascading interrupt controller
-into the host bridge. The dual version routes the interrupts to the host
-chips interrupt controller.
-
-The host controller appear on the PCI bus with vendor ID 0x159b (Faraday
-Technology) and product ID 0x4321.
-
-Mandatory properties:
-
-- compatible: ranging from specific to generic, should be one of
-  "cortina,gemini-pci", "faraday,ftpci100"
-  "cortina,gemini-pci-dual", "faraday,ftpci100-dual"
-  "faraday,ftpci100"
-  "faraday,ftpci100-dual"
-- reg: memory base and size for the host bridge
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- #interrupt-cells: set to <1>
-- bus-range: set to <0x00 0xff>
-- device_type, set to "pci"
-- ranges: see pci.txt
-- interrupt-map-mask: see pci.txt
-- interrupt-map: see pci.txt
-- dma-ranges: three ranges for the inbound memory region. The ranges must
-  be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB,
-  128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
-  pre-fetchable.
-
-Optional properties:
-- clocks: when present, this should contain the peripheral clock (PCLK) and the
-  PCI clock (PCICLK). If these are not present, they are assumed to be
-  hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz.
-- clock-names: when present, this should contain "PCLK" for the peripheral
-  clock and "PCICLK" for the PCI-side clock.
-
-Mandatory subnodes:
-- For "faraday,ftpci100" a node representing the interrupt-controller inside the
-  host bridge is mandatory. It has the following mandatory properties:
-  - interrupt: see interrupt-controller/interrupts.txt
-  - interrupt-controller: see interrupt-controller/interrupts.txt
-  - #address-cells: set to <0>
-  - #interrupt-cells: set to <1>
-
-I/O space considerations:
-
-The plain variant has 128MiB of non-prefetchable memory space, whereas the
-"dual" variant has 64MiB. Take this into account when describing the ranges.
-
-Interrupt map considerations:
-
-The "dual" variant will get INT A, B, C, D from the system interrupt controller
-and should point to respective interrupt in that controller in its
-interrupt-map.
-
-The code which is the only documentation of how the Faraday PCI (the non-dual
-variant) interrupts assigns the default interrupt mapping/swizzling has
-typically been like this, doing the swizzling on the interrupt controller side
-rather than in the interconnect:
-
-interrupt-map-mask = <0xf800 0 0 7>;
-interrupt-map =
-	<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-	<0x4800 0 0 2 &pci_intc 1>,
-	<0x4800 0 0 3 &pci_intc 2>,
-	<0x4800 0 0 4 &pci_intc 3>,
-	<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-	<0x5000 0 0 2 &pci_intc 2>,
-	<0x5000 0 0 3 &pci_intc 3>,
-	<0x5000 0 0 4 &pci_intc 0>,
-	<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-	<0x5800 0 0 2 &pci_intc 3>,
-	<0x5800 0 0 3 &pci_intc 0>,
-	<0x5800 0 0 4 &pci_intc 1>,
-	<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-	<0x6000 0 0 2 &pci_intc 0>,
-	<0x6000 0 0 3 &pci_intc 1>,
-	<0x6000 0 0 4 &pci_intc 2>;
-
-Example:
-
-pci@50000000 {
-	compatible = "cortina,gemini-pci", "faraday,ftpci100";
-	reg = <0x50000000 0x100>;
-	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, /* PCI A */
-			<26 IRQ_TYPE_LEVEL_HIGH>, /* PCI B */
-			<27 IRQ_TYPE_LEVEL_HIGH>, /* PCI C */
-			<28 IRQ_TYPE_LEVEL_HIGH>; /* PCI D */
-	#address-cells = <3>;
-	#size-cells = <2>;
-	#interrupt-cells = <1>;
-
-	bus-range = <0x00 0xff>;
-	ranges = /* 1MiB I/O space 0x50000000-0x500fffff */
-		 <0x01000000 0 0          0x50000000 0 0x00100000>,
-		 /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
-		 <0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
-
-	/* DMA ranges */
-	dma-ranges =
-	/* 128MiB at 0x00000000-0x07ffffff */
-	<0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
-	/* 64MiB at 0x00000000-0x03ffffff */
-	<0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
-	/* 64MiB at 0x00000000-0x03ffffff */
-	<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
-
-	interrupt-map-mask = <0xf800 0 0 7>;
-	interrupt-map =
-		<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-		<0x4800 0 0 2 &pci_intc 1>,
-		<0x4800 0 0 3 &pci_intc 2>,
-		<0x4800 0 0 4 &pci_intc 3>,
-		<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-		<0x5000 0 0 2 &pci_intc 2>,
-		<0x5000 0 0 3 &pci_intc 3>,
-		<0x5000 0 0 4 &pci_intc 0>,
-		<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-		<0x5800 0 0 2 &pci_intc 3>,
-		<0x5800 0 0 3 &pci_intc 0>,
-		<0x5800 0 0 4 &pci_intc 1>,
-		<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-		<0x6000 0 0 2 &pci_intc 0>,
-		<0x6000 0 0 3 &pci_intc 0>,
-		<0x6000 0 0 4 &pci_intc 0>;
-	pci_intc: interrupt-controller {
-		interrupt-parent = <&intcon>;
-		interrupt-controller;
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml
new file mode 100644
index 000000000000..92efbf0f1297
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/faraday,ftpci100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTPCI100 PCI Host Bridge
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+    This PCI bridge is found inside that Cortina Systems Gemini SoC platform and
+    is a generic IP block from Faraday Technology. It exists in two variants:
+    plain and dual PCI. The plain version embeds a cascading interrupt controller
+    into the host bridge. The dual version routes the interrupts to the host
+    chips interrupt controller.
+    The host controller appear on the PCI bus with vendor ID 0x159b (Faraday
+    Technology) and product ID 0x4321.
+    I/O space considerations:
+    The plain variant has 128MiB of non-prefetchable memory space, whereas the
+    "dual" variant has 64MiB. Take this into account when describing the ranges.
+
+    Interrupt map considerations:
+
+    The "dual" variant will get INT A, B, C, D from the system interrupt controller
+    and should point to respective interrupt in that controller in its interrupt-map.
+
+    The code which is the only documentation of how the Faraday PCI (the non-dual
+    variant) interrupts assigns the default interrupt mapping/swizzling has
+    typically been like this, doing the swizzling on the interrupt controller side
+    rather than in the interconnect:
+
+    interrupt-map-mask = <0xf800 0 0 7>;
+    interrupt-map =
+        <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+        <0x4800 0 0 2 &pci_intc 1>,
+        <0x4800 0 0 3 &pci_intc 2>,
+        <0x4800 0 0 4 &pci_intc 3>,
+        <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+        <0x5000 0 0 2 &pci_intc 2>,
+        <0x5000 0 0 3 &pci_intc 3>,
+        <0x5000 0 0 4 &pci_intc 0>,
+        <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+        <0x5800 0 0 2 &pci_intc 3>,
+        <0x5800 0 0 3 &pci_intc 0>,
+        <0x5800 0 0 4 &pci_intc 1>,
+        <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+        <0x6000 0 0 2 &pci_intc 0>,
+        <0x6000 0 0 3 &pci_intc 1>,
+        <0x6000 0 0 4 &pci_intc 2>;
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: cortina,gemini-pci
+          - const: faraday,ftpci100
+      - items:
+          - const: cortina,gemini-pci-dual
+          - const: faraday,ftpci100-dual
+      - const: faraday,ftpci100
+      - const: faraday,ftpci100-dual
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 3
+
+  "#interrupt-cells":
+    const: 1
+
+  ranges:
+    minItems: 2
+
+  dma-ranges:
+    minItems: 3
+    description: |
+      three ranges for the inbound memory region. The ranges must
+      be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB,
+      128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
+      pre-fetchable.
+
+  clocks:
+    items:
+      - description: peripheral clock (PCLK)
+      - description: PCI clock (PCICLK).
+    description: |
+      If these are not present, they are assumed to be
+      hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz.
+
+  clock-names:
+    items:
+      - const: PCLK
+      - const: PCICLK
+
+  interrupt-controller:
+    type: object
+
+required:
+  - reg
+  - compatible
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+  - dma-ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: faraday,ftpci100
+then:
+  required:
+    - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pci@50000000 {
+      compatible = "cortina,gemini-pci", "faraday,ftpci100";
+      reg = <0x50000000 0x100>;
+      device_type = "pci";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      #interrupt-cells = <1>;
+
+      bus-range = <0x00 0xff>;
+      ranges = /* 1MiB I/O space 0x50000000-0x500fffff */
+        <0x01000000 0 0          0x50000000 0 0x00100000>,
+        /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+        <0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+
+      /* DMA ranges */
+      dma-ranges =
+        /* 128MiB at 0x00000000-0x07ffffff */
+        <0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
+        /* 64MiB at 0x00000000-0x03ffffff */
+        <0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
+        /* 64MiB at 0x00000000-0x03ffffff */
+        <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+      interrupt-map-mask = <0xf800 0 0 7>;
+      interrupt-map =
+        <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+        <0x4800 0 0 2 &pci_intc 1>,
+        <0x4800 0 0 3 &pci_intc 2>,
+        <0x4800 0 0 4 &pci_intc 3>,
+        <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+        <0x5000 0 0 2 &pci_intc 2>,
+        <0x5000 0 0 3 &pci_intc 3>,
+        <0x5000 0 0 4 &pci_intc 0>,
+        <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+        <0x5800 0 0 2 &pci_intc 3>,
+        <0x5800 0 0 3 &pci_intc 0>,
+        <0x5800 0 0 4 &pci_intc 1>,
+        <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+        <0x6000 0 0 2 &pci_intc 0>,
+        <0x6000 0 0 3 &pci_intc 0>,
+        <0x6000 0 0 4 &pci_intc 0>;
+      pci_intc: interrupt-controller {
+        interrupt-parent = <&intcon>;
+        interrupt-controller;
+        interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <0>;
+        #interrupt-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
deleted file mode 100644
index de4b2baf91e8..000000000000
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-* Freescale i.MX6 PCIe interface
-
-This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in designware-pcie.txt.
-
-Required properties:
-- compatible:
-	- "fsl,imx6q-pcie"
-	- "fsl,imx6sx-pcie",
-	- "fsl,imx6qp-pcie"
-	- "fsl,imx7d-pcie"
-	- "fsl,imx8mq-pcie"
-- reg: base address and length of the PCIe controller
-- interrupts: A list of interrupt outputs of the controller. Must contain an
-  entry for each entry in the interrupt-names property.
-- interrupt-names: Must include the following entries:
-	- "msi": The interrupt that is asserted when an MSI is received
-- clock-names: Must include the following additional entries:
-	- "pcie_phy"
-
-Optional properties:
-- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0
-- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0
-- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20
-- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127
-- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127
-- fsl,max-link-speed: Specify PCI gen for link capability. Must be '2' for
-  gen2, otherwise will default to gen1. Note that the IMX6 LVDS clock outputs
-  do not meet gen2 jitter requirements and thus for gen2 capability a gen2
-  compliant clock generator should be used and configured.
-- reset-gpio: Should specify the GPIO for controlling the PCI bus device reset
-  signal. It's not polarity aware and defaults to active-low reset sequence
-  (L=reset state, H=operation state).
-- reset-gpio-active-high: If present then the reset sequence using the GPIO
-  specified in the "reset-gpio" property is reversed (H=reset state,
-  L=operation state).
-- vpcie-supply: Should specify the regulator in charge of PCIe port power.
-  The regulator will be enabled when initializing the PCIe host and
-  disabled either as part of the init process or when shutting down the
-  host.
-
-Additional required properties for imx6sx-pcie:
-- clock names: Must include the following additional entries:
-	- "pcie_inbound_axi"
-- power-domains: Must be set to phandles pointing to the DISPLAY and
-  PCIE_PHY power domains
-- power-domain-names: Must be "pcie", "pcie_phy"
-
-Additional required properties for imx7d-pcie and imx8mq-pcie:
-- power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
-- resets: Must contain phandles to PCIe-related reset lines exposed by SRC
-  IP block
-- reset-names: Must contain the following entries:
-	       - "pciephy"
-	       - "apps"
-	       - "turnoff"
-- fsl,imx7d-pcie-phy: A phandle to an fsl,imx7d-pcie-phy node.
-
-Additional required properties for imx8mq-pcie:
-- clock-names: Must include the following additional entries:
-	- "pcie_aux"
-
-Example:
-
-	pcie@01000000 {
-		compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
-		reg = <0x01ffc000 0x04000>,
-		      <0x01f00000 0x80000>;
-		reg-names = "dbi", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000
-			  0x81000000 0 0          0x01f80000 0 0x00010000
-			  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>;
-		num-lanes = <1>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-		                <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-		                <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-		                <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks 144>, <&clks 206>, <&clks 189>;
-		clock-names = "pcie", "pcie_bus", "pcie_phy";
-	};
-
-* Freescale i.MX7d PCIe PHY
-
-This is the PHY associated with the IMX7d PCIe controller.  It's used by the
-PCI-e controller via the fsl,imx7d-pcie-phy phandle.
-
-Required properties:
-- compatible:
-	- "fsl,imx7d-pcie-phy"
-- reg: base address and length of the PCIe PHY controller
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
new file mode 100644
index 000000000000..376e739bcad4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -0,0 +1,210 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 PCIe host controller
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+description: |+
+  This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+  and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6q-pcie
+      - fsl,imx6sx-pcie
+      - fsl,imx6qp-pcie
+      - fsl,imx7d-pcie
+      - fsl,imx8mq-pcie
+      - fsl,imx8mm-pcie
+      - fsl,imx8mp-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: PCIe configuration space region.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+
+  interrupts:
+    items:
+      - description: builtin MSI controller.
+
+  interrupt-names:
+    items:
+      - const: msi
+
+  clocks:
+    minItems: 3
+    items:
+      - description: PCIe bridge clock.
+      - description: PCIe bus clock.
+      - description: PCIe PHY clock.
+      - description: Additional required clock entry for imx6sx-pcie,
+          imx8mq-pcie.
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: pcie
+      - const: pcie_bus
+      - const: pcie_phy
+      - const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie
+
+  num-lanes:
+    const: 1
+
+  fsl,imx7d-pcie-phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to an fsl,imx7d-pcie-phy node. Additional
+      required properties for imx7d-pcie and imx8mq-pcie.
+
+  power-domains:
+    items:
+      - description: The phandle pointing to the DISPLAY domain for
+          imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie and
+          imx8mq-pcie.
+      - description: The phandle pointing to the PCIE_PHY power domains
+          for imx6sx-pcie.
+
+  power-domain-names:
+    items:
+      - const: pcie
+      - const: pcie_phy
+
+  resets:
+    maxItems: 3
+    description: Phandles to PCIe-related reset lines exposed by SRC
+      IP block. Additional required by imx7d-pcie and imx8mq-pcie.
+
+  reset-names:
+    items:
+      - const: pciephy
+      - const: apps
+      - const: turnoff
+
+  fsl,tx-deemph-gen1:
+    description: Gen1 De-emphasis value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,tx-deemph-gen2-3p5db:
+    description: Gen2 (3.5db) De-emphasis value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,tx-deemph-gen2-6db:
+    description: Gen2 (6db) De-emphasis value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 20
+
+  fsl,tx-swing-full:
+    description: Gen2 TX SWING FULL value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 127
+
+  fsl,tx-swing-low:
+    description: TX launch amplitude swing_low value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 127
+
+  fsl,max-link-speed:
+    description: Specify PCI Gen for link capability (optional required).
+      Note that the IMX6 LVDS clock outputs do not meet gen2 jitter
+      requirements and thus for gen2 capability a gen2 compliant clock
+      generator should be used and configured.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4]
+    default: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  reset-gpio:
+    description: Should specify the GPIO for controlling the PCI bus device
+      reset signal. It's not polarity aware and defaults to active-low reset
+      sequence (L=reset state, H=operation state) (optional required).
+
+  reset-gpio-active-high:
+    description: If present then the reset sequence using the GPIO
+      specified in the "reset-gpio" property is reversed (H=reset state,
+      L=operation state) (optional required).
+    type: boolean
+
+  vpcie-supply:
+    description: Should specify the regulator in charge of PCIe port power.
+      The regulator will be enabled when initializing the PCIe host and
+      disabled either as part of the init process or when shutting down
+      the host (optional required).
+
+  vph-supply:
+    description: Should specify the regulator in charge of VPH one of
+      the three PCIe PHY powers. This regulator can be supplied by both
+      1.8v and 3.3v voltage supplies (optional required).
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#address-cells"
+  - "#size-cells"
+  - device_type
+  - bus-range
+  - ranges
+  - num-lanes
+  - interrupts
+  - interrupt-names
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie: pcie@1ffc000 {
+        compatible = "fsl,imx6q-pcie";
+        reg = <0x01ffc000 0x04000>,
+              <0x01f00000 0x80000>;
+        reg-names = "dbi", "config";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        bus-range = <0x00 0xff>;
+        ranges = <0x81000000 0 0          0x01f80000 0 0x00010000>,
+                 <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>;
+        num-lanes = <1>;
+        interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "msi";
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 0x7>;
+        interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
+                <&clks IMX6QDL_CLK_LVDS1_GATE>,
+                <&clks IMX6QDL_CLK_PCIE_REF_125M>;
+        clock-names = "pcie", "pcie_bus", "pcie_phy";
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
new file mode 100644
index 000000000000..c9f04999c9cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/hisilicon,kirin-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Kirin SoCs PCIe host DT description
+
+maintainers:
+  - Xiaowei Song <songxiaowei@hisilicon.com>
+  - Binghui Wang <wangbinghui@hisilicon.com>
+
+description: |
+  Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
+  It shares common functions with the PCIe DesignWare core driver and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    contains:
+      enum:
+        - hisilicon,kirin960-pcie
+        - hisilicon,kirin970-pcie
+
+  reg:
+    description: |
+      Should contain dbi, apb, config registers location and length.
+      For hisilicon,kirin960-pcie, it should also contain phy.
+    minItems: 3
+    maxItems: 4
+
+  reg-names:
+    minItems: 3
+    maxItems: 4
+
+  clocks: true
+
+  clock-names:
+    items:
+      - const: pcie_phy_ref
+      - const: pcie_aux
+      - const: pcie_apb_phy
+      - const: pcie_apb_sys
+      - const: pcie_aclk
+
+  phys:
+    maxItems: 1
+
+  hisilicon,clken-gpios:
+    description: |
+      Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and
+      mini-PCIe slots.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/hi3660-clock.h>
+    #include <dt-bindings/clock/hi3670-clock.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie@f4000000 {
+        compatible = "hisilicon,kirin960-pcie";
+        reg = <0x0 0xf4000000 0x0 0x1000>,
+              <0x0 0xff3fe000 0x0 0x1000>,
+              <0x0 0xf3f20000 0x0 0x40000>,
+              <0x0 0xf5000000 0x0 0x2000>;
+        reg-names = "dbi", "apb", "phy", "config";
+        bus-range = <0x0  0xff>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        ranges = <0x02000000 0x0 0x00000000
+                  0x0 0xf6000000
+                  0x0 0x02000000>;
+        num-lanes = <1>;
+        #interrupt-cells = <1>;
+        interrupts = <0 283 4>;
+        interrupt-names = "msi";
+        interrupt-map-mask = <0xf800 0 0 7>;
+        interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+                 <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+                 <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+                 <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+                 <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+        clock-names = "pcie_phy_ref", "pcie_aux", "pcie_apb_phy",
+                      "pcie_apb_sys", "pcie_aclk";
+      };
+
+      pcie@f5000000 {
+        compatible = "hisilicon,kirin970-pcie";
+        reg = <0x0 0xf4000000 0x0 0x1000000>,
+              <0x0 0xfc180000 0x0 0x1000>,
+              <0x0 0xf5000000 0x0 0x2000>;
+        reg-names = "dbi", "apb", "config";
+        bus-range = <0x0  0xff>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        phys = <&pcie_phy>;
+        ranges = <0x02000000 0x0 0x00000000
+                  0x0 0xf6000000
+                  0x0 0x02000000>;
+        num-lanes = <1>;
+        #interrupt-cells = <1>;
+        interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "msi";
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+        reset-gpios = <&gpio7 0 0>;
+        hisilicon,clken-gpios = <&gpio27 3 0>, <&gpio17 0 0>, <&gpio20 6 0>;
+        pcie@0,0 { // Lane 0: PCIe switch: Bus 1, Device 0
+          reg = <0 0 0 0 0>;
+          compatible = "pciclass,0604";
+          device_type = "pci";
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+
+          pcie@0,0 { // Lane 0: upstream
+            reg = <0 0 0 0 0>;
+            compatible = "pciclass,0604";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            ranges;
+
+            pcie@1,0 { // Lane 4: M.2
+              reg = <0x0800 0 0 0 0>;
+              compatible = "pciclass,0604";
+              device_type = "pci";
+              reset-gpios = <&gpio3 1 0>;
+              #address-cells = <3>;
+              #size-cells = <2>;
+              ranges;
+            };
+
+            pcie@5,0 { // Lane 5: Mini PCIe
+              reg = <0x2800 0 0 0 0>;
+              compatible = "pciclass,0604";
+              device_type = "pci";
+              reset-gpios = <&gpio27 4 0 >;
+              #address-cells = <3>;
+              #size-cells = <2>;
+              ranges;
+            };
+
+            pcie@7,0 { // Lane 6: Ethernet
+              reg = <0x03800 0 0 0 0>;
+              compatible = "pciclass,0604";
+              device_type = "pci";
+              reset-gpios = <&gpio25 2 0 >;
+              #address-cells = <3>;
+              #size-cells = <2>;
+              ranges;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
index 760b4d740616..5f0cf6c2fef3 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
@@ -3,7 +3,7 @@ HiSilicon STB PCIe host bridge DT description
 The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core.
 It shares common functions with the DesignWare PCIe core driver and inherits
 common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt.
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
 
 Additional properties are described here:
 
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
deleted file mode 100644
index d6796ef54ea1..000000000000
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-HiSilicon Hip05 and Hip06 PCIe host bridge DT description
-
-HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core.
-It shares common functions with the PCIe DesignWare core driver and inherits
-common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt.
-
-Additional properties are described here:
-
-Required properties
-- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie".
-- reg: Should contain rc_dbi, config registers location and length.
-- reg-names: Must include the following entries:
-  "rc_dbi": controller configuration registers;
-  "config": PCIe configuration space registers.
-- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts.
-- port-id: Should be 0, 1, 2 or 3.
-
-Optional properties:
-- status: Either "ok" or "disabled".
-- dma-coherent: Present if DMA operations are coherent.
-
-Hip05 Example (note that Hip06 is the same except compatible):
-	pcie@b0080000 {
-		compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
-		reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
-		reg-names = "rc_dbi", "config";
-		bus-range = <0  15>;
-		msi-parent = <&its_pcie>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		dma-coherent;
-		ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>;
-		num-lanes = <8>;
-		port-id = <1>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0x0 0 0 1 &mbigen_pcie 1 10
-				 0x0 0 0 2 &mbigen_pcie 2 11
-				 0x0 0 0 3 &mbigen_pcie 3 12
-				 0x0 0 0 4 &mbigen_pcie 4 13>;
-	};
diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
index 47353d0cd394..d25423aa7167 100644
--- a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
+++ b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
@@ -106,6 +106,9 @@ properties:
     maxItems: 3
 
   dma-coherent: true
+  iommu-map: true
+  iommu-map-mask: true
+  msi-parent: true
 
 required:
   - compatible
@@ -137,6 +140,8 @@ allOf:
         reg:
           maxItems: 1
 
+unevaluatedProperties: false
+
 examples:
   - |
 
diff --git a/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
new file mode 100644
index 000000000000..debfb54a8042
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,ixp4xx-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx PCI controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: PCI host controller found in the Intel IXP4xx SoC series.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - intel,ixp42x-pci
+          - intel,ixp43x-pci
+    description: The two supported variants are ixp42x and ixp43x,
+      though more variants may exist.
+
+  reg:
+    items:
+      - description: IXP4xx-specific registers
+
+  interrupts:
+    items:
+      - description: Main PCI interrupt
+      - description: PCI DMA interrupt 1
+      - description: PCI DMA interrupt 2
+
+  ranges:
+    maxItems: 2
+    description: Typically one memory range of 64MB and one IO
+      space range of 64KB.
+
+  dma-ranges:
+    maxItems: 1
+    description: The DMA range tells the PCI host which addresses
+      the RAM is at. It can map only 64MB so if the RAM is bigger
+      than 64MB the DMA access has to be restricted to these
+      addresses.
+
+  "#interrupt-cells": true
+
+  interrupt-map: true
+
+  interrupt-map-mask:
+    items:
+      - const: 0xf800
+      - const: 0
+      - const: 0
+      - const: 7
+
+required:
+  - compatible
+  - reg
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pci@c0000000 {
+      compatible = "intel,ixp43x-pci";
+      reg = <0xc0000000 0x1000>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      device_type = "pci";
+      bus-range = <0x00 0xff>;
+
+      ranges =
+        <0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+        <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+      dma-ranges =
+        <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0xf800 0 0 7>;
+      interrupt-map =
+        <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
+        <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
+        <0x0800 0 0 3 &gpio0 9  3>, /* INT C on slot 1 is irq 9 */
+        <0x0800 0 0 4 &gpio0 8  3>, /* INT D on slot 1 is irq 8 */
+        <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
+        <0x1000 0 0 2 &gpio0 9  3>, /* INT B on slot 2 is irq 9 */
+        <0x1000 0 0 3 &gpio0 8  3>, /* INT C on slot 2 is irq 8 */
+        <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
+        <0x1800 0 0 1 &gpio0 9  3>, /* INT A on slot 3 is irq 9 */
+        <0x1800 0 0 2 &gpio0 8  3>, /* INT B on slot 3 is irq 8 */
+        <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */
+        <0x1800 0 0 4 &gpio0 10 3>; /* INT D on slot 3 is irq 10 */
+    };
diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
new file mode 100644
index 000000000000..e87ff27526ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/intel,keembay-pcie-ep.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel Keem Bay PCIe controller Endpoint mode
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+  - Srikanth Thokala <srikanth.thokala@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-pcie-ep
+
+  reg:
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: atu
+      - const: addr_space
+      - const: apb
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: pcie
+      - const: pcie_ev
+      - const: pcie_err
+      - const: pcie_mem_access
+
+  num-lanes:
+    description: Number of lanes to use.
+    enum: [ 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pcie-ep@37000000 {
+          compatible = "intel,keembay-pcie-ep";
+          reg = <0x37000000 0x00001000>,
+                <0x37100000 0x00001000>,
+                <0x37300000 0x00001000>,
+                <0x36000000 0x01000000>,
+                <0x37800000 0x00000200>;
+          reg-names = "dbi", "dbi2", "atu", "addr_space", "apb";
+          interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 108 IRQ_TYPE_EDGE_RISING>,
+                       <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access";
+          num-lanes = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
new file mode 100644
index 000000000000..ed4400c9ac09
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/intel,keembay-pcie.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel Keem Bay PCIe controller Root Complex mode
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+  - Srikanth Thokala <srikanth.thokala@intel.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: intel,keembay-pcie
+
+  ranges:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: atu
+      - const: config
+      - const: apb
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: master
+      - const: aux
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: pcie
+      - const: pcie_ev
+      - const: pcie_err
+
+  num-lanes:
+    description: Number of lanes to use.
+    enum: [ 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ranges
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #define KEEM_BAY_A53_PCIE
+    #define KEEM_BAY_A53_AUX_PCIE
+    pcie@37000000 {
+          compatible = "intel,keembay-pcie";
+          reg = <0x37000000 0x00001000>,
+                <0x37300000 0x00001000>,
+                <0x36e00000 0x00200000>,
+                <0x37800000 0x00000200>;
+          reg-names = "dbi", "atu", "config", "apb";
+          #address-cells = <3>;
+          #size-cells = <2>;
+          device_type = "pci";
+          ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>;
+          interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "pcie", "pcie_ev", "pcie_err";
+          clocks = <&scmi_clk KEEM_BAY_A53_PCIE>,
+                   <&scmi_clk KEEM_BAY_A53_AUX_PCIE>;
+          clock-names = "master", "aux";
+          reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>;
+          num-lanes = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
index 48a98dae00de..54e2890ae631 100644
--- a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
@@ -7,7 +7,18 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: PCIe RC controller on Intel Gateway SoCs
 
 maintainers:
-  - Dilip Kota <eswara.kota@linux.intel.com>
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: intel,lgm-pcie
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
 
 properties:
   compatible:
@@ -15,15 +26,6 @@ properties:
       - const: intel,lgm-pcie
       - const: snps,dw-pcie
 
-  device_type:
-    const: pci
-
-  "#address-cells":
-    const: 3
-
-  "#size-cells":
-    const: 2
-
   reg:
     items:
       - description: Controller control and status registers.
@@ -54,30 +56,12 @@ properties:
   reset-gpios:
     maxItems: 1
 
-  linux,pci-domain: true
-
   num-lanes:
     maximum: 2
-    description: Number of lanes to use for this port.
-
-  '#interrupt-cells':
-    const: 1
-
-  interrupt-map-mask:
-    description: Standard PCI IRQ mapping properties.
-
-  interrupt-map:
-    description: Standard PCI IRQ mapping properties.
 
   max-link-speed:
-    description: Specify PCI Gen for link capability.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 1, 2, 3, 4 ]
-      - default: 1
-
-  bus-range:
-    description: Range of bus numbers associated with this controller.
+    enum: [1, 2, 3, 4]
+    default: 1
 
   reset-assert-ms:
     description: |
@@ -87,9 +71,6 @@ properties:
 
 required:
   - compatible
-  - device_type
-  - "#address-cells"
-  - "#size-cells"
   - reg
   - reg-names
   - ranges
@@ -102,7 +83,7 @@ required:
   - interrupt-map
   - interrupt-map-mask
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
deleted file mode 100644
index 6bbe43818ad5..000000000000
--- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-HiSilicon Kirin SoCs PCIe host DT description
-
-Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
-It shares common functions with the PCIe DesignWare core driver and
-inherits common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt.
-
-Additional properties are described here:
-
-Required properties
-- compatible:
-	"hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC
-- reg: Should contain rc_dbi, apb, phy, config registers location and length.
-- reg-names: Must include the following entries:
-  "dbi": controller configuration registers;
-  "apb": apb Ctrl register defined by Kirin;
-  "phy": apb PHY register defined by Kirin;
-  "config": PCIe configuration space registers.
-- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
-
-Optional properties:
-
-Example based on kirin960:
-
-	pcie@f4000000 {
-		compatible = "hisilicon,kirin-pcie";
-		reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>,
-		      <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF4000000 0 0x2000>;
-		reg-names = "dbi","apb","phy", "config";
-		bus-range = <0x0  0x1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>;
-		num-lanes = <1>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0x0 0 0 1 &gic 0 0 0  282 4>,
-				<0x0 0 0 2 &gic 0 0 0  283 4>,
-				<0x0 0 0 3 &gic 0 0 0  284 4>,
-				<0x0 0 0 4 &gic 0 0 0  285 4>;
-		clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
-			 <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
-			 <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
-			 <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
-			 <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
-		clock-names = "pcie_phy_ref", "pcie_aux",
-			      "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
-		reset-gpios = <&gpio11 1 0 >;
-	};
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 99a386ea691c..ee8a4791a78b 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -1,7 +1,7 @@
 Freescale Layerscape PCIe controller
 
 This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in designware-pcie.txt.
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
 This controller derives its clocks from the Reset Configuration Word (RCW)
 which is used to describe the PLL settings at the time of chip-reset.
@@ -23,43 +23,57 @@ Required properties:
         "fsl,ls1012a-pcie"
         "fsl,ls1028a-pcie"
   EP mode:
+	"fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep"
 	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep"
 - reg: base addresses and lengths of the PCIe controller register blocks.
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
-- interrupt-names: Must include the following entries:
-  "intr": The interrupt that is asserted for controller interrupts
+- interrupt-names: It could include the following entries:
+  "aer": Used for interrupt line which reports AER events when
+	 non MSI/MSI-X/INTx mode is used
+  "pme": Used for interrupt line which reports PME events when
+	 non MSI/MSI-X/INTx mode is used
+  "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
+	  which has a single interrupt line for miscellaneous controller
+	  events(could include AER and PME events).
 - fsl,pcie-scfg: Must include two entries.
   The first entry must be a link to the SCFG device node
-  The second entry must be '0' or '1' based on physical PCIe controller index.
+  The second entry is the physical PCIe controller index starting from '0'.
   This is used to get SCFG PEXN registers
 - dma-coherent: Indicates that the hardware IP block can ensure the coherency
   of the data transferred from/to the IP block. This can avoid the software
   cache flush/invalid actions, and improve the performance significantly.
 
+Optional properties:
+- big-endian: If the PEX_LUT and PF register block is in big-endian, specify
+  this property.
+
 Example:
 
-	pcie@3400000 {
-		compatible = "fsl,ls1021a-pcie";
-		reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
-		       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
-		reg-names = "regs", "config";
-		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-		interrupt-names = "intr";
-		fsl,pcie-scfg = <&scfg 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		dma-coherent;
-		num-lanes = <4>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
-			  0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0 0x20000000   /* prefetchable memory */
-			  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-	};
+        pcie@3400000 {
+                compatible = "fsl,ls1088a-pcie";
+                reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+                      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+                reg-names = "regs", "config";
+                interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+                interrupt-names = "aer";
+                #address-cells = <3>;
+                #size-cells = <2>;
+                device_type = "pci";
+                dma-coherent;
+                num-viewport = <256>;
+                bus-range = <0x0 0xff>;
+                ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+                          0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+                msi-parent = <&its>;
+                #interrupt-cells = <1>;
+                interrupt-map-mask = <0 0 0 7>;
+                interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+                iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+        };
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
new file mode 100644
index 000000000000..b40fb5d15d3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
@@ -0,0 +1,52 @@
+NXP Layerscape PCIe Gen4 controller
+
+This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all
+the common properties defined in mobiveil-pcie.txt.
+
+Required properties:
+- compatible: should contain the platform identifier such as:
+  "fsl,lx2160a-pcie"
+- reg: base addresses and lengths of the PCIe controller register blocks.
+  "csr_axi_slave": Bridge config registers
+  "config_axi_slave": PCIe controller registers
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: It could include the following entries:
+  "intr": The interrupt that is asserted for controller interrupts
+  "aer": Asserted for aer interrupt when chip support the aer interrupt with
+	 none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
+  "pme": Asserted for pme interrupt when chip support the pme interrupt with
+	 none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
+- dma-coherent: Indicates that the hardware IP block can ensure the coherency
+  of the data transferred from/to the IP block. This can avoid the software
+  cache flush/invalid actions, and improve the performance significantly.
+- msi-parent : See the generic MSI binding described in
+  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+Example:
+
+	pcie@3400000 {
+		compatible = "fsl,lx2160a-pcie";
+		reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+		       0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+		reg-names = "csr_axi_slave", "config_axi_slave";
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+		interrupt-names = "aer", "pme", "intr";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		apio-wins = <8>;
+		ppio-wins = <8>;
+		dma-coherent;
+		bus-range = <0x0 0xff>;
+		msi-parent = <&its>;
+		ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml
new file mode 100644
index 000000000000..a8324a9bd002
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/loongson.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/loongson.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson PCI Host Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |+
+  PCI host controller found on Loongson PCHs and SoCs.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k-pci
+      - loongson,ls7a-pci
+      - loongson,rs780e-pci
+
+  reg:
+    minItems: 1
+    items:
+      - description: CFG0 standard config space register
+      - description: CFG1 extended config space register
+
+  ranges:
+    minItems: 1
+    maxItems: 3
+
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@1a000000 {
+            compatible = "loongson,rs780e-pci";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            // CPU_PHYSICAL(2)  SIZE(2)
+            reg = <0x0 0x1a000000  0x0 0x2000000>;
+
+            // BUS_ADDRESS(3)  CPU_PHYSICAL(2)  SIZE(2)
+            ranges = <0x01000000 0x0 0x00004000  0x0 0x00004000  0x0 0x00004000>,
+                     <0x02000000 0x0 0x40000000  0x0 0x40000000  0x0 0x40000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
new file mode 100644
index 000000000000..d60f43fd9c5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek,mt7621-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7621 PCIe controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |+
+  MediaTek MT7621 PCIe subsys supports a single Root Complex (RC)
+  with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7621-pci
+
+  reg:
+    items:
+      - description: host-pci bridge registers
+      - description: pcie port 0 RC control registers
+      - description: pcie port 1 RC control registers
+      - description: pcie port 2 RC control registers
+
+  ranges:
+    maxItems: 2
+
+patternProperties:
+  'pcie@[0-2],0':
+    type: object
+    $ref: /schemas/pci/pci-bus.yaml#
+
+    properties:
+      resets:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      phys:
+        maxItems: 1
+
+      phy-names:
+        pattern: '^pcie-phy[0-2]$'
+
+    required:
+      - "#interrupt-cells"
+      - interrupt-map-mask
+      - interrupt-map
+      - resets
+      - clocks
+      - phys
+      - phy-names
+      - ranges
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    pcie: pcie@1e140000 {
+        compatible = "mediatek,mt7621-pci";
+        reg = <0x1e140000 0x100>,
+              <0x1e142000 0x100>,
+              <0x1e143000 0x100>,
+              <0x1e144000 0x100>;
+
+        #address-cells = <3>;
+        #size-cells = <2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pcie_pins>;
+        device_type = "pci";
+        ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>,  /* pci memory */
+                 <0x01000000 0 0x1e160000 0x1e160000 0 0x00010000>;  /* io space */
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0xF800 0 0 0>;
+        interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+        reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+
+        pcie@0,0 {
+            reg = <0x0000 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&rstctrl 24>;
+            clocks = <&clkctrl 24>;
+            phys = <&pcie0_phy 1>;
+            phy-names = "pcie-phy0";
+            ranges;
+        };
+
+        pcie@1,0 {
+            reg = <0x0800 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&rstctrl 25>;
+            clocks = <&clkctrl 25>;
+            phys = <&pcie0_phy 1>;
+            phy-names = "pcie-phy1";
+            ranges;
+        };
+
+        pcie@2,0 {
+            reg = <0x1000 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&rstctrl 26>;
+            clocks = <&clkctrl 26>;
+            phys = <&pcie2_phy 0>;
+            phy-names = "pcie-phy2";
+            ranges;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
new file mode 100644
index 000000000000..841a3d284bbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIECFG controller
+
+maintainers:
+  - Chuanjia Liu <chuanjia.liu@mediatek.com>
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |
+  The MediaTek PCIECFG controller controls some feature about
+  LTSSM, ASPM and so on.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,generic-pciecfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pciecfg: pciecfg@1a140000 {
+        compatible = "mediatek,generic-pciecfg", "syscon";
+        reg = <0x1a140000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
new file mode 100644
index 000000000000..c00be39af64e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gen3 PCIe controller on MediaTek SoCs
+
+maintainers:
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |+
+  PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed
+  and compatible with Gen2, Gen1 speed.
+
+  This PCIe controller supports up to 256 MSI vectors, the MSI hardware
+  block diagram is as follows:
+
+                    +-----+
+                    | GIC |
+                    +-----+
+                       ^
+                       |
+                   port->irq
+                       |
+               +-+-+-+-+-+-+-+-+
+               |0|1|2|3|4|5|6|7| (PCIe intc)
+               +-+-+-+-+-+-+-+-+
+                ^ ^           ^
+                | |    ...    |
+        +-------+ +------+    +-----------+
+        |                |                |
+  +-+-+---+--+--+  +-+-+---+--+--+  +-+-+---+--+--+
+  |0|1|...|30|31|  |0|1|...|30|31|  |0|1|...|30|31| (MSI sets)
+  +-+-+---+--+--+  +-+-+---+--+--+  +-+-+---+--+--+
+   ^ ^      ^  ^    ^ ^      ^  ^    ^ ^      ^  ^
+   | |      |  |    | |      |  |    | |      |  |  (MSI vectors)
+   | |      |  |    | |      |  |    | |      |  |
+
+    (MSI SET0)       (MSI SET1)  ...   (MSI SET7)
+
+  With 256 MSI vectors supported, the MSI vectors are composed of 8 sets,
+  each set has its own address for MSI message, and supports 32 MSI vectors
+  to generate interrupt.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8188-pcie
+              - mediatek,mt8195-pcie
+          - const: mediatek,mt8192-pcie
+      - const: mediatek,mt8192-pcie
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: pcie-mac
+
+  interrupts:
+    maxItems: 1
+
+  ranges:
+    minItems: 1
+    maxItems: 8
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: phy
+      - const: mac
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: pl_250m
+      - const: tl_26m
+      - const: tl_96m
+      - const: tl_32k
+      - const: peri_26m
+      - enum:
+          - top_133m        # for MT8192
+          - peri_mem        # for MT8188/MT8195
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pcie-phy
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      '#address-cells':
+        const: 0
+      '#interrupt-cells':
+        const: 1
+      interrupt-controller: true
+
+    required:
+      - '#address-cells'
+      - '#interrupt-cells'
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - ranges
+  - clocks
+  - clock-names
+  - '#interrupt-cells'
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@11230000 {
+            compatible = "mediatek,mt8192-pcie";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x00 0x11230000 0x00 0x4000>;
+            reg-names = "pcie-mac";
+            interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
+            bus-range = <0x00 0xff>;
+            ranges = <0x82000000 0x00 0x12000000 0x00
+                      0x12000000 0x00 0x1000000>;
+            clocks = <&infracfg 44>,
+                     <&infracfg 40>,
+                     <&infracfg 43>,
+                     <&infracfg 97>,
+                     <&infracfg 99>,
+                     <&infracfg 111>;
+            clock-names = "pl_250m", "tl_26m", "tl_96m",
+                          "tl_32k", "peri_26m", "top_133m";
+            assigned-clocks = <&topckgen 50>;
+            assigned-clock-parents = <&topckgen 91>;
+
+            phys = <&pciephy>;
+            phy-names = "pcie-phy";
+
+            resets = <&infracfg_rst 2>,
+                     <&infracfg_rst 3>;
+            reset-names = "phy", "mac";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &pcie_intc 0>,
+                            <0 0 0 2 &pcie_intc 1>,
+                            <0 0 0 3 &pcie_intc 2>,
+                            <0 0 0 4 &pcie_intc 3>;
+            pcie_intc: interrupt-controller {
+                      #address-cells = <0>;
+                      #interrupt-cells = <1>;
+                      interrupt-controller;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 7468d666763a..684227522267 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -7,8 +7,9 @@ Required properties:
 	"mediatek,mt7622-pcie"
 	"mediatek,mt7623-pcie"
 	"mediatek,mt7629-pcie"
+	"airoha,en7523-pcie"
 - device_type: Must be "pci"
-- reg: Base addresses and lengths of the PCIe subsys and root ports.
+- reg: Base addresses and lengths of the root ports.
 - reg-names: Names of the above areas to use during resource lookup.
 - #address-cells: Address representation for root ports (must be 3)
 - #size-cells: Size representation for root ports (must be 2)
@@ -47,9 +48,12 @@ Required properties for MT7623/MT2701:
 - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
   number of root ports.
 
-Required properties for MT2712/MT7622:
+Required properties for MT2712/MT7622/MT7629:
 -interrupts: A list of interrupt outputs of the controller, must have one
 	     entry for each PCIe port
+- interrupt-names: Must include the following entries:
+	- "pcie_irq": The interrupt that is asserted when an MSI/INTX is received
+- linux,pci-domain: PCI domain ID. Should be unique for each host controller
 
 In addition, the device tree node must have sub-nodes describing each
 PCIe port interface, having the following mandatory properties:
@@ -143,130 +147,143 @@ Examples for MT7623:
 
 Examples for MT2712:
 
-	pcie: pcie@11700000 {
+	pcie1: pcie@112ff000 {
 		compatible = "mediatek,mt2712-pcie";
 		device_type = "pci";
-		reg = <0 0x11700000 0 0x1000>,
-		      <0 0x112ff000 0 0x1000>;
-		reg-names = "port0", "port1";
+		reg = <0 0x112ff000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
 		#address-cells = <3>;
 		#size-cells = <2>;
-		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
-			 <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
-			 <&pericfg CLK_PERI_PCIE0>,
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
 			 <&pericfg CLK_PERI_PCIE1>;
-		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1";
-		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
-		phy-names = "pcie-phy0", "pcie-phy1";
+		clock-names = "sys_ck1", "ahb_ck1";
+		phys = <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy1";
 		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
+		ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
+		status = "disabled";
 
-		pcie0: pcie@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-					<0 0 0 2 &pcie_intc0 1>,
-					<0 0 0 3 &pcie_intc0 2>,
-					<0 0 0 4 &pcie_intc0 3>;
-			pcie_intc0: interrupt-controller {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
 		};
+	};
 
-		pcie1: pcie@1,0 {
-			reg = <0x0800 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
+	pcie0: pcie@11700000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x11700000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+			 <&pericfg CLK_PERI_PCIE0>;
+		clock-names = "sys_ck0", "ahb_ck0";
+		phys = <&u3port0 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-					<0 0 0 2 &pcie_intc1 1>,
-					<0 0 0 3 &pcie_intc1 2>,
-					<0 0 0 4 &pcie_intc1 3>;
-			pcie_intc1: interrupt-controller {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
 		};
 	};
 
 Examples for MT7622:
 
-	pcie: pcie@1a140000 {
+	pcie0: pcie@1a143000 {
 		compatible = "mediatek,mt7622-pcie";
 		device_type = "pci";
-		reg = <0 0x1a140000 0 0x1000>,
-		      <0 0x1a143000 0 0x1000>,
-		      <0 0x1a145000 0 0x1000>;
-		reg-names = "subsys", "port0", "port1";
+		reg = <0 0x1a143000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
-		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
 		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
-			 <&pciesys CLK_PCIE_P1_MAC_EN>,
 			 <&pciesys CLK_PCIE_P0_AHB_EN>,
-			 <&pciesys CLK_PCIE_P1_AHB_EN>,
 			 <&pciesys CLK_PCIE_P0_AUX_EN>,
-			 <&pciesys CLK_PCIE_P1_AUX_EN>,
 			 <&pciesys CLK_PCIE_P0_AXI_EN>,
-			 <&pciesys CLK_PCIE_P1_AXI_EN>,
 			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
-			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
-			 <&pciesys CLK_PCIE_P0_PIPE_EN>,
-			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
-		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
-			      "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
-			      "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
-		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
-		phy-names = "pcie-phy0", "pcie-phy1";
+			 <&pciesys CLK_PCIE_P0_PIPE_EN>;
+		clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
+			      "axi_ck0", "obff_ck0", "pipe_ck0";
+
 		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
 		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
+		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x8000000>;
+		status = "disabled";
 
-		pcie0: pcie@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-					<0 0 0 2 &pcie_intc0 1>,
-					<0 0 0 3 &pcie_intc0 2>,
-					<0 0 0 4 &pcie_intc0 3>;
-			pcie_intc0: interrupt-controller {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
 		};
+	};
 
-		pcie1: pcie@1,0 {
-			reg = <0x0800 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
+	pcie1: pcie@1a145000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a145000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
+		clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+			 /* designer has connect RC1 with p0_ahb clock */
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P1_AUX_EN>,
+			 <&pciesys CLK_PCIE_P1_AXI_EN>,
+			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+		clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
+			      "axi_ck1", "obff_ck1", "pipe_ck1";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x0 0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-					<0 0 0 2 &pcie_intc1 1>,
-					<0 0 0 3 &pcie_intc1 2>,
-					<0 0 0 4 &pcie_intc1 3>;
-			pcie_intc1: interrupt-controller {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
 		};
 	};
diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
new file mode 100644
index 000000000000..f7a3c2636355
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/microchip,pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PCIe Root Port Bridge Controller
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    const: microchip,pcie-host-1.0 # PolarFire
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: apb
+
+  clocks:
+    description:
+      Fabric Interface Controllers, FICs, are the interface between the FPGA
+      fabric and the core complex on PolarFire SoC. The FICs require two clocks,
+      one from each side of the interface. The "FIC clocks" described by this
+      property are on the core complex side & communication through a FIC is not
+      possible unless it's corresponding clock is enabled. A clock must be
+      enabled for each of the interfaces the root port is connected through.
+      This could in theory be all 4 interfaces, one interface or any combination
+      in between.
+    minItems: 1
+    items:
+      - description: FIC0's clock
+      - description: FIC1's clock
+      - description: FIC2's clock
+      - description: FIC3's clock
+
+  clock-names:
+    description:
+      As any FIC connection combination is possible, the names should match the
+      order in the clocks property and take the form "ficN" where N is a number
+      0-3
+    minItems: 1
+    maxItems: 4
+    items:
+      pattern: '^fic[0-3]$'
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: pcie
+      - const: msi
+
+  ranges:
+    maxItems: 1
+
+  dma-ranges:
+    minItems: 1
+    maxItems: 6
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  interrupt-controller:
+    type: object
+    properties:
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupt-controller: true
+
+    required:
+      - '#address-cells'
+      - '#interrupt-cells'
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - reg
+  - reg-names
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            pcie0: pcie@2030000000 {
+                    compatible = "microchip,pcie-host-1.0";
+                    reg = <0x0 0x70000000 0x0 0x08000000>,
+                          <0x0 0x43000000 0x0 0x00010000>;
+                    reg-names = "cfg", "apb";
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <119>;
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+                                    <0 0 0 2 &pcie_intc0 1>,
+                                    <0 0 0 3 &pcie_intc0 2>,
+                                    <0 0 0 4 &pcie_intc0 3>;
+                    interrupt-parent = <&plic0>;
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    bus-range = <0x00 0x7f>;
+                    ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>;
+                    pcie_intc0: interrupt-controller {
+                        #address-cells = <0>;
+                        #interrupt-cells = <1>;
+                        interrupt-controller;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
index 6173af6885f8..6d022a9d36ee 100644
--- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -77,9 +77,15 @@ and the following optional properties:
 - marvell,pcie-lane: the physical PCIe lane number, for ports having
   multiple lanes. If this property is not found, we assume that the
   value is 0.
+- num-lanes: number of SerDes PCIe lanes for this link (1 or 4)
 - reset-gpios: optional GPIO to PERST#
 - reset-delay-us: delay in us to wait after reset de-assertion, if not
   specified will default to 100ms, as required by the PCIe specification.
+- interrupt-names: list of interrupt names, supported are:
+   - "intx" - interrupt line triggered by one of the legacy interrupt
+- interrupts or interrupts-extended: List of the interrupt sources which
+  corresponding to the "interrupt-names". If non-empty then also additional
+  'interrupt-controller' subnode must be defined.
 
 Example:
 
@@ -141,6 +147,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 58>;
 		marvell,pcie-port = <0>;
 		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
 		/* low-active PERST# reset on GPIO 25 */
 		reset-gpios = <&gpio0 25 1>;
 		/* wait 20ms for device settle after reset deassertion */
@@ -161,6 +168,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 59>;
 		marvell,pcie-port = <0>;
 		marvell,pcie-lane = <1>;
+		num-lanes = <1>;
 		clocks = <&gateclk 6>;
 	};
 
@@ -177,6 +185,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 60>;
 		marvell,pcie-port = <0>;
 		marvell,pcie-lane = <2>;
+		num-lanes = <1>;
 		clocks = <&gateclk 7>;
 	};
 
@@ -193,6 +202,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 61>;
 		marvell,pcie-port = <0>;
 		marvell,pcie-lane = <3>;
+		num-lanes = <1>;
 		clocks = <&gateclk 8>;
 	};
 
@@ -209,6 +219,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 62>;
 		marvell,pcie-port = <1>;
 		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
 		clocks = <&gateclk 9>;
 	};
 
@@ -225,6 +236,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 63>;
 		marvell,pcie-port = <1>;
 		marvell,pcie-lane = <1>;
+		num-lanes = <1>;
 		clocks = <&gateclk 10>;
 	};
 
@@ -241,6 +253,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 64>;
 		marvell,pcie-port = <1>;
 		marvell,pcie-lane = <2>;
+		num-lanes = <1>;
 		clocks = <&gateclk 11>;
 	};
 
@@ -257,6 +270,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 65>;
 		marvell,pcie-port = <1>;
 		marvell,pcie-lane = <3>;
+		num-lanes = <1>;
 		clocks = <&gateclk 12>;
 	};
 
@@ -273,6 +287,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 99>;
 		marvell,pcie-port = <2>;
 		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
 		clocks = <&gateclk 26>;
 	};
 
@@ -289,6 +304,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 103>;
 		marvell,pcie-port = <3>;
 		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
 		clocks = <&gateclk 27>;
 	};
 };
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
new file mode 100644
index 000000000000..a24fb8307d29
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
@@ -0,0 +1,319 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe Endpoint controller (Synopsys DesignWare Core based)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Vidya Sagar <vidyas@nvidia.com>
+
+description: |
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+  inherits all the common properties defined in snps,dw-pcie-ep.yaml.  Some
+  of the controller instances are dual mode; they can work either in Root
+  Port mode or Endpoint mode but one at a time.
+
+  On Tegra194, controllers C0, C4 and C5 support Endpoint mode.
+  On Tegra234, controllers C5, C6, C7 and C10 support Endpoint mode.
+
+  Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
+  operate in the Endpoint mode because of the way the platform is designed.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pcie-ep
+      - nvidia,tegra234-pcie-ep
+
+  reg:
+    items:
+      - description: controller's application logic registers
+      - description: iATU and DMA registers. This is where the iATU (internal
+          Address Translation Unit) registers of the PCIe core are made
+          available for software access.
+      - description: aperture where the Root Port's own configuration
+          registers are available.
+      - description: aperture used to map the remote Root Complex address space
+
+  reg-names:
+    items:
+      - const: appl
+      - const: atu_dma
+      - const: dbi
+      - const: addr_space
+
+  interrupts:
+    items:
+      - description: controller interrupt
+
+  interrupt-names:
+    items:
+      - const: intr
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: core
+
+  resets:
+    items:
+      - description: APB bus interface reset
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: apb
+      - const: core
+
+  reset-gpios:
+    description: Must contain a phandle to a GPIO controller followed by GPIO
+      that is being used as PERST input signal. Please refer to pci.txt.
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: p2u-0
+      - const: p2u-1
+      - const: p2u-2
+      - const: p2u-3
+      - const: p2u-4
+      - const: p2u-5
+      - const: p2u-6
+      - const: p2u-7
+
+  power-domains:
+    maxItems: 1
+    description: |
+      A phandle to the node that controls power to the respective PCIe
+      controller and a specifier name for the PCIe controller.
+
+      Tegra194 specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h"
+      Tegra234 specifiers are defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Must contain a pair of phandles to BPMP controller node followed by
+      controller ID. Following are the controller IDs for each controller:
+
+      Tegra194
+
+        0: C0
+        1: C1
+        2: C2
+        3: C3
+        4: C4
+        5: C5
+
+      Tegra234
+
+        0 : C0
+        1 : C1
+        2 : C2
+        3 : C3
+        4 : C4
+        5 : C5
+        6 : C6
+        7 : C7
+        8 : C8
+        9 : C9
+        10: C10
+
+    items:
+      - items:
+          - description: phandle to BPMP controller node
+          - description: PCIe controller ID
+            maximum: 10
+
+  nvidia,aspm-cmrt-us:
+    description: Common Mode Restore Time for proper operation of ASPM to be
+      specified in microseconds
+
+  nvidia,aspm-pwr-on-t-us:
+    description: Power On time for proper operation of ASPM to be specified in
+      microseconds
+
+  nvidia,aspm-l0s-entrance-latency-us:
+    description: ASPM L0s entrance latency to be specified in microseconds
+
+  vddio-pex-ctl-supply:
+    description: A phandle to the regulator supply for PCIe side band signals
+
+  nvidia,refclk-select-gpios:
+    maxItems: 1
+    description: GPIO used to enable REFCLK to controller from the host
+
+  nvidia,enable-ext-refclk:
+    description: |
+      This boolean property needs to be present if the controller is configured
+      to receive Reference Clock from the host.
+      NOTE: This is applicable only for Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,enable-srns:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to operate in SRNS (Separate Reference Clocks with No
+      Spread-Spectrum Clocking).  NOTE: This is applicable only for
+      Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+
+unevaluatedProperties: false
+
+required:
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - reset-gpios
+  - vddio-pex-ctl-supply
+  - num-lanes
+  - phys
+  - phy-names
+  - nvidia,bpmp
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/gpio/tegra194-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie-ep@141a0000 {
+            compatible = "nvidia,tegra194-pcie-ep";
+            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */
+                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */
+                  <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
+            reg-names = "appl", "atu_dma", "dbi", "addr_space";
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+            interrupt-names = "intr";
+
+            clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+                     <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+            reset-names = "apb", "core";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+            nvidia,bpmp = <&bpmp 5>;
+
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+            reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+            nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+                                          GPIO_ACTIVE_HIGH>;
+
+            num-lanes = <8>;
+
+            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+                        "p2u-5", "p2u-6", "p2u-7";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/gpio/tegra234-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie-ep@141a0000 {
+            compatible = "nvidia,tegra234-pcie-ep";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
+            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+                  <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G)        */
+            reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+            interrupt-names = "intr";
+
+            clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
+                     <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
+            reset-names = "apb", "core";
+
+            nvidia,bpmp = <&bpmp 5>;
+
+            nvidia,enable-ext-refclk;
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            vddio-pex-ctl-supply = <&p3701_vdd_1v8_ls>;
+
+            reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
+
+            nvidia,refclk-select-gpios = <&gpio_aon
+                                          TEGRA234_AON_GPIO(AA, 4)
+                                          GPIO_ACTIVE_HIGH>;
+
+            num-lanes = <8>;
+
+            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+                        "p2u-5", "p2u-6", "p2u-7";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
deleted file mode 100644
index b739f92da58e..000000000000
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
+++ /dev/null
@@ -1,171 +0,0 @@
-NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based)
-
-This PCIe host controller is based on the Synopsis Designware PCIe IP
-and thus inherits all the common properties defined in designware-pcie.txt.
-
-Required properties:
-- compatible: For Tegra19x, must contain "nvidia,tegra194-pcie".
-- device_type: Must be "pci"
-- power-domains: A phandle to the node that controls power to the respective
-  PCIe controller and a specifier name for the PCIe controller. Following are
-  the specifiers for the different PCIe controllers
-    TEGRA194_POWER_DOMAIN_PCIEX8B: C0
-    TEGRA194_POWER_DOMAIN_PCIEX1A: C1
-    TEGRA194_POWER_DOMAIN_PCIEX1A: C2
-    TEGRA194_POWER_DOMAIN_PCIEX1A: C3
-    TEGRA194_POWER_DOMAIN_PCIEX4A: C4
-    TEGRA194_POWER_DOMAIN_PCIEX8A: C5
-  these specifiers are defined in
-  "include/dt-bindings/power/tegra194-powergate.h" file.
-- reg: A list of physical base address and length pairs for each set of
-  controller registers. Must contain an entry for each entry in the reg-names
-  property.
-- reg-names: Must include the following entries:
-  "appl": Controller's application logic registers
-  "config": As per the definition in designware-pcie.txt
-  "atu_dma": iATU and DMA registers. This is where the iATU (internal Address
-             Translation Unit) registers of the PCIe core are made available
-             for SW access.
-  "dbi": The aperture where root port's own configuration registers are
-         available
-- interrupts: A list of interrupt outputs of the controller. Must contain an
-  entry for each entry in the interrupt-names property.
-- interrupt-names: Must include the following entries:
-  "intr": The Tegra interrupt that is asserted for controller interrupts
-  "msi": The Tegra interrupt that is asserted when an MSI is received
-- bus-range: Range of bus numbers associated with this controller
-- #address-cells: Address representation for root ports (must be 3)
-  - cell 0 specifies the bus and device numbers of the root port:
-    [23:16]: bus number
-    [15:11]: device number
-  - cell 1 denotes the upper 32 address bits and should be 0
-  - cell 2 contains the lower 32 address bits and is used to translate to the
-    CPU address space
-- #size-cells: Size representation for root ports (must be 2)
-- ranges: Describes the translation of addresses for root ports and standard
-  PCI regions. The entries must be 7 cells each, where the first three cells
-  correspond to the address as described for the #address-cells property
-  above, the fourth and fifth cells are for the physical CPU address to
-  translate to and the sixth and seventh cells are as described for the
-  #size-cells property above.
-  - Entries setup the mapping for the standard I/O, memory and
-    prefetchable PCI regions. The first cell determines the type of region
-    that is setup:
-    - 0x81000000: I/O memory region
-    - 0x82000000: non-prefetchable memory region
-    - 0xc2000000: prefetchable memory region
-  Please refer to the standard PCI bus binding document for a more detailed
-  explanation.
-- #interrupt-cells: Size representation for interrupts (must be 1)
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
-  Please refer to the standard PCI bus binding document for a more detailed
-  explanation.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - core
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - apb
-  - core
-- phys: Must contain a phandle to P2U PHY for each entry in phy-names.
-- phy-names: Must include an entry for each active lane.
-  "p2u-N": where N ranges from 0 to one less than the total number of lanes
-- nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed
-  by controller-id. Following are the controller ids for each controller.
-    0: C0
-    1: C1
-    2: C2
-    3: C3
-    4: C4
-    5: C5
-- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals
-
-Optional properties:
-- pinctrl-names: A list of pinctrl state names.
-  It is mandatory for C5 controller and optional for other controllers.
-  - "default": Configures PCIe I/O for proper operation.
-- pinctrl-0: phandle for the 'default' state of pin configuration.
-  It is mandatory for C5 controller and optional for other controllers.
-- supports-clkreq: Refer to Documentation/devicetree/bindings/pci/pci.txt
-- nvidia,update-fc-fixup: This is a boolean property and needs to be present to
-    improve performance when a platform is designed in such a way that it
-    satisfies at least one of the following conditions thereby enabling root
-    port to exchange optimum number of FC (Flow Control) credits with
-    downstream devices
-    1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
-    2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
-       a) speed is Gen-2 and MPS is 256B
-       b) speed is >= Gen-3 with any MPS
-- nvidia,aspm-cmrt-us: Common Mode Restore Time for proper operation of ASPM
-   to be specified in microseconds
-- nvidia,aspm-pwr-on-t-us: Power On time for proper operation of ASPM to be
-   specified in microseconds
-- nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be
-   specified in microseconds
-- vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot
-  if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
-  in p2972-0000 platform).
-- vpcie12v-supply: A phandle to the regulator node that supplies 12V to the slot
-  if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
-  in p2972-0000 platform).
-
-Examples:
-=========
-
-Tegra194:
---------
-
-	pcie@14180000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
-		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
-		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x38040000 0x0 0x00040000>; /* iATU_DMA reg space (256K)  */
-		reg-names = "appl", "config", "atu_dma";
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		num-lanes = <8>;
-		linux,pci-domain = <0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
-
-		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
-		clock-names = "core";
-
-		resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
-			 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
-		reset-names = "apb", "core";
-
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
-		interrupt-names = "intr", "msi";
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-
-		nvidia,bpmp = <&bpmp 0>;
-
-		supports-clkreq;
-		nvidia,aspm-cmrt-us = <60>;
-		nvidia,aspm-pwr-on-t-us = <20>;
-		nvidia,aspm-l0s-entrance-latency-us = <3>;
-
-		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x38100000 0x0  0x38100000 0x0 0x00100000    /* downstream I/O (1MB) */
-			  0x82000000 0x0  0x38200000 0x0  0x38200000 0x0 0x01E00000    /* non-prefetchable memory (30MB) */
-			  0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>;  /* prefetchable memory (16GB) */
-
-		vddio-pex-ctl-supply = <&vdd_1v8ao>;
-		vpcie3v3-supply = <&vdd_3v3_pcie>;
-		vpcie12v-supply = <&vdd_12v_pcie>;
-
-		phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
-		       <&p2u_hsio_5>;
-		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
-	};
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml
new file mode 100644
index 000000000000..75da3e8eecb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml
@@ -0,0 +1,350 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe controller (Synopsys DesignWare Core based)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Vidya Sagar <vidyas@nvidia.com>
+
+description: |
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+  inherits all the common properties defined in snps,dw-pcie.yaml. Some of
+  the controller instances are dual mode where in they can work either in
+  Root Port mode or Endpoint mode but one at a time.
+
+  See nvidia,tegra194-pcie-ep.yaml for details on the Endpoint mode device
+  tree bindings.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pcie
+      - nvidia,tegra234-pcie
+
+  reg:
+    items:
+      - description: controller's application logic registers
+      - description: configuration registers
+      - description: iATU and DMA registers. This is where the iATU (internal
+          Address Translation Unit) registers of the PCIe core are made
+          available for software access.
+      - description: aperture where the Root Port's own configuration
+          registers are available.
+
+  reg-names:
+    items:
+      - const: appl
+      - const: config
+      - const: atu_dma
+      - const: dbi
+
+  interrupts:
+    items:
+      - description: controller interrupt
+      - description: MSI interrupt
+
+  interrupt-names:
+    items:
+      - const: intr
+      - const: msi
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: core
+
+  resets:
+    items:
+      - description: APB bus interface reset
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: apb
+      - const: core
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: p2u-0
+      - const: p2u-1
+      - const: p2u-2
+      - const: p2u-3
+      - const: p2u-4
+      - const: p2u-5
+      - const: p2u-6
+      - const: p2u-7
+
+  power-domains:
+    maxItems: 1
+    description: |
+      A phandle to the node that controls power to the respective PCIe
+      controller and a specifier name for the PCIe controller.
+
+      Tegra194 specifiers defined in "include/dt-bindings/power/tegra194-powergate.h"
+      Tegra234 specifiers defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Must contain a pair of phandles to BPMP controller node followed by
+      controller ID. Following are the controller IDs for each controller:
+
+      Tegra194
+
+        0: C0
+        1: C1
+        2: C2
+        3: C3
+        4: C4
+        5: C5
+
+      Tegra234
+
+        0 : C0
+        1 : C1
+        2 : C2
+        3 : C3
+        4 : C4
+        5 : C5
+        6 : C6
+        7 : C7
+        8 : C8
+        9 : C9
+        10: C10
+
+    items:
+      - items:
+          - description: phandle to BPMP controller node
+          - description: PCIe controller ID
+            maximum: 10
+
+  nvidia,update-fc-fixup:
+    description: |
+      This is a boolean property and needs to be present to improve performance
+      when a platform is designed in such a way that it satisfies at least one
+      of the following conditions thereby enabling Root Port to exchange
+      optimum number of FC (Flow Control) credits with downstream devices:
+
+      NOTE: This is applicable only for Tegra194.
+
+        1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
+        2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
+          a) speed is Gen-2 and MPS is 256B
+          b) speed is >= Gen-3 with any MPS
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,aspm-cmrt-us:
+    description: Common Mode Restore Time for proper operation of ASPM to be
+      specified in microseconds
+
+  nvidia,aspm-pwr-on-t-us:
+    description: Power On time for proper operation of ASPM to be specified in
+      microseconds
+
+  nvidia,aspm-l0s-entrance-latency-us:
+    description: ASPM L0s entrance latency to be specified in microseconds
+
+  vddio-pex-ctl-supply:
+    description: A phandle to the regulator supply for PCIe side band signals.
+
+  vpcie3v3-supply:
+    description: A phandle to the regulator node that supplies 3.3V to the slot
+      if the platform has one such slot, e.g., x16 slot owned by C5 controller
+      in p2972-0000 platform.
+
+  vpcie12v-supply:
+    description: A phandle to the regulator node that supplies 12V to the slot
+      if the platform has one such slot, e.g., x16 slot owned by C5 controller
+      in p2972-0000 platform.
+
+  nvidia,enable-srns:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to operate in SRNS (Separate Reference Clocks with No
+      Spread-Spectrum Clocking).  NOTE: This is applicable only for
+      Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,enable-ext-refclk:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to use the reference clocking coming in from an external
+      clock source instead of using the internal clock source.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+unevaluatedProperties: false
+
+required:
+  - interrupts
+  - interrupt-names
+  - interrupt-map
+  - interrupt-map-mask
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - vddio-pex-ctl-supply
+  - num-lanes
+  - phys
+  - phy-names
+  - nvidia,bpmp
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie@14180000 {
+            compatible = "nvidia,tegra194-pcie";
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+            reg = <0x0 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x0 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
+                  <0x0 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x0 0x38080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+            reg-names = "appl", "config", "atu_dma", "dbi";
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            num-lanes = <8>;
+            linux,pci-domain = <0>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
+
+            clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+                     <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+            reset-names = "apb", "core";
+
+            interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+            interrupt-names = "intr", "msi";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+            nvidia,bpmp = <&bpmp 0>;
+
+            supports-clkreq;
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            bus-range = <0x0 0xff>;
+            ranges = <0x81000000 0x0  0x38100000 0x0  0x38100000 0x0 0x00100000>, /* downstream I/O */
+                     <0x82000000 0x0  0x38200000 0x0  0x38200000 0x0 0x01e00000>, /* non-prefetch memory */
+                     <0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory */
+
+            vddio-pex-ctl-supply = <&vdd_1v8ao>;
+            vpcie3v3-supply = <&vdd_3v3_pcie>;
+            vpcie12v-supply = <&vdd_12v_pcie>;
+
+            phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
+                   <&p2u_hsio_5>;
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie@14160000 {
+            compatible = "nvidia,tegra234-pcie";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>;
+            reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
+                  <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+            reg-names = "appl", "config", "atu_dma", "dbi";
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            num-lanes = <4>;
+            num-viewport = <8>;
+            linux,pci-domain = <4>;
+
+            clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>,
+                     <&bpmp TEGRA234_RESET_PEX0_CORE_4>;
+            reset-names = "apb", "core";
+
+            interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+                         <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+            interrupt-names = "intr", "msi";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+            nvidia,bpmp = <&bpmp 4>;
+
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            bus-range = <0x0 0xff>;
+            ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable */
+                     <0x02000000 0x0  0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable */
+                     <0x01000000 0x0  0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O */
+
+            vddio-pex-ctl-supply = <&p3701_vdd_AO_1v8>;
+
+            phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+                   <&p2u_hsio_7>;
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index 7939bca47861..d099f3476ccc 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -112,28 +112,16 @@ Power supplies for Tegra124:
 - Required:
   - avddio-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
   - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
-  - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
-    supply 1.05 V.
   - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
     Must supply 3.3 V.
-  - hvdd-pex-pll-e-supply: High-voltage supply for PLLE (shared with USB3).
-    Must supply 3.3 V.
   - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
     supply 2.8-3.3 V.
-  - avdd-pll-erefe-supply: Power supply for PLLE (shared with USB3). Must
-    supply 1.05 V.
 
 Power supplies for Tegra210:
 - Required:
-  - avdd-pll-uerefe-supply: Power supply for PLLE (shared with USB3). Must
-    supply 1.05 V.
   - hvddio-pex-supply: High-voltage supply for PCIe I/O and PCIe output
     clocks. Must supply 1.8 V.
   - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
-  - dvdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
-    supply 1.05 V.
-  - hvdd-pex-pll-e-supply: High-voltage supply for PLLE (shared with USB3).
-    Must supply 3.3 V.
   - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
     supply 1.8 V.
 
diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
index 7a813d0e6d63..ff25a134befa 100644
--- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt
+++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
@@ -1,7 +1,7 @@
 * Marvell Armada 7K/8K PCIe interface
 
 This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in designware-pcie.txt.
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
 Required properties:
 - compatible: "marvell,armada8k-pcie"
diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml
new file mode 100644
index 000000000000..ccec51ab5247
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCI Endpoint Controller Schema
+
+description: |
+  Common properties for PCI Endpoint Controller Nodes.
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+  $nodename:
+    pattern: "^pcie-ep@"
+
+  max-functions:
+    description: Maximum number of functions that can be configured
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    default: 1
+    maximum: 255
+
+  max-virtual-functions:
+    description: Array representing the number of virtual functions corresponding to each physical
+      function
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 255
+
+  max-link-speed:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 3, 4 ]
+
+  num-lanes:
+    description: maximum number of lanes
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    default: 1
+    maximum: 16
+
+required:
+  - compatible
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
deleted file mode 100644
index 47202a2938f2..000000000000
--- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
+++ /dev/null
@@ -1,115 +0,0 @@
-TI Keystone PCIe interface
-
-Keystone PCI host Controller is based on the Synopsys DesignWare PCI
-hardware version 3.65.  It shares common functions with the PCIe DesignWare
-core driver and inherits common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt
-
-Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt
-for the details of DesignWare DT bindings.  Additional properties are
-described here as well as properties that are not applicable.
-
-Required Properties:-
-
-compatibility: Should be "ti,keystone-pcie" for RC on Keystone2 SoC
-	       Should be "ti,am654-pcie-rc" for RC on AM654x SoC
-reg: Three register ranges as listed in the reg-names property
-reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
-	   TI specific application registers, "config" for the
-	   configuration space address
-
-pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
-	interrupt-cells: should be set to 1
-	interrupts: GIC interrupt lines connected to PCI MSI interrupt lines
-	(required if the compatible is "ti,keystone-pcie")
-msi-map: As specified in Documentation/devicetree/bindings/pci/pci-msi.txt
-	 (required if the compatible is "ti,am654-pcie-rc".
-
-ti,syscon-pcie-id : phandle to the device control module required to set device
-		    id and vendor id.
-ti,syscon-pcie-mode : phandle to the device control module required to configure
-		      PCI in either RC mode or EP mode.
-
- Example:
-	pcie_msi_intc: msi-interrupt-controller {
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
-	};
-
-pcie_intc: Interrupt controller device node for Legacy IRQ chip
-	interrupt-cells: should be set to 1
-
- Example:
-	pcie_intc: legacy-interrupt-controller {
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
-	};
-
-Optional properties:-
-	phys: phandle to generic Keystone SerDes PHY for PCI
-	phy-names: name of the generic Keystone SerDes PHY for PCI
-	  - If boot loader already does PCI link establishment, then phys and
-	    phy-names shouldn't be present.
-	interrupts: platform interrupt for error interrupts.
-
-DesignWare DT Properties not applicable for Keystone PCI
-
-1. pcie_bus clock-names not used.  Instead, a phandle to phys is used.
-
-AM654 PCIe Endpoint
-===================
-
-Required Properties:-
-
-compatibility: Should be "ti,am654-pcie-ep" for EP on AM654x SoC
-reg: Four register ranges as listed in the reg-names property
-reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
-	   TI specific application registers, "atu" for the
-	   Address Translation Unit configuration registers and
-	   "addr_space" used to map remote RC address space
-num-ib-windows: As specified in
-		Documentation/devicetree/bindings/pci/designware-pcie.txt
-num-ob-windows: As specified in
-		Documentation/devicetree/bindings/pci/designware-pcie.txt
-num-lanes: As specified in
-	   Documentation/devicetree/bindings/pci/designware-pcie.txt
-power-domains: As documented by the generic PM domain bindings in
-	       Documentation/devicetree/bindings/power/power_domain.txt.
-ti,syscon-pcie-mode: phandle to the device control module required to configure
-		      PCI in either RC mode or EP mode.
-
-Optional properties:-
-
-phys: list of PHY specifiers (used by generic PHY framework)
-phy-names: must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
-               number of lanes as specified in *num-lanes* property.
-("phys" and "phy-names" DT bindings are specified in
-Documentation/devicetree/bindings/phy/phy-bindings.txt)
-interrupts: platform interrupt for error interrupts.
-
-pcie-ep {
-	compatible = "ti,am654-pcie-ep";
-	reg =  <0x5500000 0x1000>, <0x5501000 0x1000>,
-	       <0x10000000 0x8000000>, <0x5506000 0x1000>;
-	reg-names = "app", "dbics", "addr_space", "atu";
-	power-domains = <&k3_pds 120>;
-	ti,syscon-pcie-mode = <&pcie0_mode>;
-	num-lanes = <1>;
-	num-ib-windows = <16>;
-	num-ob-windows = <16>;
-	interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
-};
diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
deleted file mode 100644
index b94078f58d8e..000000000000
--- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Renesas AHB to PCI bridge
--------------------------
-
-This is the bridge used internally to connect the USB controllers to the
-AHB. There is one bridge instance per USB port connected to the internal
-OHCI and EHCI controllers.
-
-Required properties:
-- compatible: "renesas,pci-r8a7743" for the R8A7743 SoC;
-	      "renesas,pci-r8a7744" for the R8A7744 SoC;
-	      "renesas,pci-r8a7745" for the R8A7745 SoC;
-	      "renesas,pci-r8a7790" for the R8A7790 SoC;
-	      "renesas,pci-r8a7791" for the R8A7791 SoC;
-	      "renesas,pci-r8a7793" for the R8A7793 SoC;
-	      "renesas,pci-r8a7794" for the R8A7794 SoC;
-	      "renesas,pci-rcar-gen2" for a generic R-Car Gen2 or
-				      RZ/G1 compatible device.
-
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg:	A list of physical regions to access the device: the first is
-	the operational registers for the OHCI/EHCI controllers and the
-	second is for the bridge configuration and control registers.
-- interrupts: interrupt for the device.
-- clocks: The reference to the device clock.
-- bus-range: The PCI bus number range; as this is a single bus, the range
-	     should be specified as the same value twice.
-- #address-cells: must be 3.
-- #size-cells: must be 2.
-- #interrupt-cells: must be 1.
-- interrupt-map: standard property used to define the mapping of the PCI
-  interrupts to the GIC interrupts.
-- interrupt-map-mask: standard property that helps to define the interrupt
-  mapping.
-
-Optional properties:
-- dma-ranges: a single range for the inbound memory region. If not supplied,
-  defaults to 1GiB at 0x40000000. Note there are hardware restrictions on the
-  allowed combinations of address and size.
-
-Example SoC configuration:
-
-	pci0: pci@ee090000  {
-		compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
-		reg = <0x0 0xee090000 0x0 0xc00>,
-		      <0x0 0xee080000 0x0 0x1100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
-
-		usb@1,0 {
-			reg = <0x800 0 0 0 0>;
-			phys = <&usb0 0>;
-			phy-names = "usb";
-		};
-
-		usb@2,0 {
-			reg = <0x1000 0 0 0 0>;
-			phys = <&usb0 0>;
-			phy-names = "usb";
-		};
-	};
-
-Example board setup:
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
index 29bcbd88f457..6a8f2874a24d 100644
--- a/Documentation/devicetree/bindings/pci/pci.txt
+++ b/Documentation/devicetree/bindings/pci/pci.txt
@@ -1,12 +1,12 @@
 PCI bus bridges have standardized Device Tree bindings:
 
 PCI Bus Binding to: IEEE Std 1275-1994
-http://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf
+https://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf
 
 And for the interrupt mapping part:
 
 Open Firmware Recommended Practice: Interrupt Mapping
-http://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf
+https://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf
 
 Additionally to the properties specified in the above standards a host bridge
 driver implementation may support the following properties:
diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt
index 557a5089229d..2ad1fe466eab 100644
--- a/Documentation/devicetree/bindings/pci/pcie-al.txt
+++ b/Documentation/devicetree/bindings/pci/pcie-al.txt
@@ -2,7 +2,7 @@
 
 Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare
 PCI core. It inherits common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt.
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
 
 Properties of the host controller node that differ from it are:
 
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
new file mode 100644
index 000000000000..977c976ea799
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCIe Endpoint Controller binding
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdx55-pcie-ep
+      - qcom,sm8450-pcie-ep
+
+  reg:
+    items:
+      - description: Qualcomm-specific PARF configuration registers
+      - description: DesignWare PCIe registers
+      - description: External local bus interface registers
+      - description: Address Translation Unit (ATU) registers
+      - description: Memory region used to map remote RC address space
+      - description: BAR memory region
+
+  reg-names:
+    items:
+      - const: parf
+      - const: dbi
+      - const: elbi
+      - const: atu
+      - const: addr_space
+      - const: mmio
+
+  clocks:
+    minItems: 7
+    maxItems: 8
+
+  clock-names:
+    minItems: 7
+    maxItems: 8
+
+  qcom,perst-regs:
+    description: Reference to a syscon representing TCSR followed by the two
+                 offsets within syscon for Perst enable and Perst separation
+                 enable registers
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      minItems: 3
+      maxItems: 3
+
+  interrupts:
+    items:
+      - description: PCIe Global interrupt
+      - description: PCIe Doorbell interrupt
+
+  interrupt-names:
+    items:
+      - const: global
+      - const: doorbell
+
+  reset-gpios:
+    description: GPIO used as PERST# input signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO used as WAKE# output signal
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: core
+
+  power-domains:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pciephy
+
+  num-lanes:
+    default: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reset-gpios
+  - resets
+  - reset-names
+  - power-domains
+
+allOf:
+  - $ref: pci-ep.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdx55-pcie-ep
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PCIe Auxiliary clock
+            - description: PCIe CFG AHB clock
+            - description: PCIe Master AXI clock
+            - description: PCIe Slave AXI clock
+            - description: PCIe Slave Q2A AXI clock
+            - description: PCIe Sleep clock
+            - description: PCIe Reference clock
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg
+            - const: bus_master
+            - const: bus_slave
+            - const: slave_q2a
+            - const: sleep
+            - const: ref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-pcie-ep
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PCIe Auxiliary clock
+            - description: PCIe CFG AHB clock
+            - description: PCIe Master AXI clock
+            - description: PCIe Slave AXI clock
+            - description: PCIe Slave Q2A AXI clock
+            - description: PCIe Reference clock
+            - description: PCIe DDRSS SF TBU clock
+            - description: PCIe AGGRE NOC AXI clock
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg
+            - const: bus_master
+            - const: bus_slave
+            - const: slave_q2a
+            - const: ref
+            - const: ddrss_sf_tbu
+            - const: aggre_noc_axi
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdx55.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie_ep: pcie-ep@40000000 {
+        compatible = "qcom,sdx55-pcie-ep";
+        reg = <0x01c00000 0x3000>,
+              <0x40000000 0xf1d>,
+              <0x40000f20 0xc8>,
+              <0x40001000 0x1000>,
+              <0x40002000 0x1000>,
+              <0x01c03000 0x3000>;
+        reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+                    "mmio";
+
+        clocks = <&gcc GCC_PCIE_AUX_CLK>,
+             <&gcc GCC_PCIE_CFG_AHB_CLK>,
+             <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+             <&gcc GCC_PCIE_SLV_AXI_CLK>,
+             <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+             <&gcc GCC_PCIE_SLEEP_CLK>,
+             <&gcc GCC_PCIE_0_CLKREF_CLK>;
+        clock-names = "aux", "cfg", "bus_master", "bus_slave",
+                      "slave_q2a", "sleep", "ref";
+
+        qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "global", "doorbell";
+        reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+        wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+        resets = <&gcc GCC_PCIE_BCR>;
+        reset-names = "core";
+        power-domains = <&gcc PCIE_GDSC>;
+        phys = <&pcie0_lane>;
+        phy-names = "pciephy";
+        max-link-speed = <3>;
+        num-lanes = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
deleted file mode 100644
index 981b4de12807..000000000000
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ /dev/null
@@ -1,330 +0,0 @@
-* Qualcomm PCI express root complex
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Value should contain
-			- "qcom,pcie-ipq8064" for ipq8064
-			- "qcom,pcie-apq8064" for apq8064
-			- "qcom,pcie-apq8084" for apq8084
-			- "qcom,pcie-msm8996" for msm8996 or apq8096
-			- "qcom,pcie-ipq4019" for ipq4019
-			- "qcom,pcie-ipq8074" for ipq8074
-			- "qcom,pcie-qcs404" for qcs404
-			- "qcom,pcie-sdm845" for sdm845
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Register ranges as listed in the reg-names property
-
-- reg-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Must include the following entries
-			- "parf"   Qualcomm specific registers
-			- "dbi"	   DesignWare PCIe registers
-			- "elbi"   External local bus interface registers
-			- "config" PCIe configuration space
-
-- device_type:
-	Usage: required
-	Value type: <string>
-	Definition: Should be "pci". As specified in designware-pcie.txt
-
-- #address-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 3. As specified in designware-pcie.txt
-
-- #size-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 2. As specified in designware-pcie.txt
-
-- ranges:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: As specified in designware-pcie.txt
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: MSI interrupt
-
-- interrupt-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Should contain "msi"
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 1. As specified in designware-pcie.txt
-
-- interrupt-map-mask:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: As specified in designware-pcie.txt
-
-- interrupt-map:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: As specified in designware-pcie.txt
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: List of phandle and clock specifier pairs as listed
-		    in clock-names property
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	Configuration AHB clock
-
-- clock-names:
-	Usage: required for ipq/apq8064
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "core"	Clocks the pcie hw block
-			- "phy"		Clocks the pcie PHY block
-- clock-names:
-	Usage: required for apq8084/ipq4019
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "aux"		Auxiliary (AUX) clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-
-- clock-names:
-	Usage: required for msm8996/apq8096
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pipe"	Pipe Clock driving internal logic
-			- "aux"		Auxiliary (AUX) clock
-			- "cfg"		Configuration clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-
-- clock-names:
-	Usage: required for ipq8074
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	PCIe to SysNOC BIU clock
-			- "axi_m"	AXI Master clock
-			- "axi_s"	AXI Slave clock
-			- "ahb"		AHB clock
-			- "aux"		Auxiliary clock
-
-- clock-names:
-	Usage: required for qcs404
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	AHB clock
-			- "aux"		Auxiliary clock
-			- "master_bus"	AXI Master clock
-			- "slave_bus"	AXI Slave clock
-
--clock-names:
-	Usage: required for sdm845
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "aux"		Auxiliary clock
-			- "cfg"		Configuration clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-			- "slave_q2a"	Slave Q2A clock
-			- "tbu"		PCIe TBU clock
-			- "pipe"	PIPE clock
-
-- resets:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: List of phandle and reset specifier pairs as listed
-		    in reset-names property
-
-- reset-names:
-	Usage: required for ipq/apq8064
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "axi"  AXI reset
-			- "ahb"  AHB reset
-			- "por"  POR reset
-			- "pci"  PCI reset
-			- "phy"  PHY reset
-
-- reset-names:
-	Usage: required for apq8084
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "core" Core reset
-
-- reset-names:
-	Usage: required for ipq/apq8064
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "axi_m"		AXI master reset
-			- "axi_s"		AXI slave reset
-			- "pipe"		PIPE reset
-			- "axi_m_vmid"		VMID reset
-			- "axi_s_xpu"		XPU reset
-			- "parf"		PARF reset
-			- "phy"			PHY reset
-			- "axi_m_sticky"	AXI sticky reset
-			- "pipe_sticky"		PIPE sticky reset
-			- "pwr"			PWR reset
-			- "ahb"			AHB reset
-			- "phy_ahb"		PHY AHB reset
-
-- reset-names:
-	Usage: required for ipq8074
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pipe"		PIPE reset
-			- "sleep"		Sleep reset
-			- "sticky"		Core Sticky reset
-			- "axi_m"		AXI Master reset
-			- "axi_s"		AXI Slave reset
-			- "ahb"			AHB Reset
-			- "axi_m_sticky"	AXI Master Sticky reset
-
-- reset-names:
-	Usage: required for qcs404
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "axi_m"		AXI Master reset
-			- "axi_s"		AXI Slave reset
-			- "axi_m_sticky"	AXI Master Sticky reset
-			- "pipe_sticky"		PIPE sticky reset
-			- "pwr"			PWR reset
-			- "ahb"			AHB reset
-
-- reset-names:
-	Usage: required for sdm845
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pci"			PCIe core reset
-
-- power-domains:
-	Usage: required for apq8084 and msm8996/apq8096
-	Value type: <prop-encoded-array>
-	Definition: A phandle and power domain specifier pair to the
-		    power domain which is responsible for collapsing
-		    and restoring power to the peripheral
-
-- vdda-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: A phandle to the core analog power supply
-
-- vdda_phy-supply:
-	Usage: required for ipq/apq8064
-	Value type: <phandle>
-	Definition: A phandle to the analog power supply for PHY
-
-- vdda_refclk-supply:
-	Usage: required for ipq/apq8064
-	Value type: <phandle>
-	Definition: A phandle to the analog power supply for IC which generates
-		    reference clock
-- vddpe-3v3-supply:
-	Usage: optional
-	Value type: <phandle>
-	Definition: A phandle to the PCIe endpoint power supply
-
-- phys:
-	Usage: required for apq8084 and qcs404
-	Value type: <phandle>
-	Definition: List of phandle(s) as listed in phy-names property
-
-- phy-names:
-	Usage: required for apq8084 and qcs404
-	Value type: <stringlist>
-	Definition: Should contain "pciephy"
-
-- <name>-gpios:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: List of phandle and GPIO specifier pairs. Should contain
-			- "perst-gpios"	PCIe endpoint reset signal line
-			- "wake-gpios"	PCIe endpoint wake signal line
-
-* Example for ipq/apq8064
-	pcie@1b500000 {
-		compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie";
-		reg = <0x1b500000 0x1000
-		       0x1b502000 0x80
-		       0x1b600000 0x100
-		       0x0ff00000 0x100000>;
-		reg-names = "dbi", "elbi", "parf", "config";
-		device_type = "pci";
-		linux,pci-domain = <0>;
-		bus-range = <0x00 0xff>;
-		num-lanes = <1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
-			  0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
-		interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-				<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-				<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-				<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-		clocks = <&gcc PCIE_A_CLK>,
-			 <&gcc PCIE_H_CLK>,
-			 <&gcc PCIE_PHY_CLK>;
-		clock-names = "core", "iface", "phy";
-		resets = <&gcc PCIE_ACLK_RESET>,
-			 <&gcc PCIE_HCLK_RESET>,
-			 <&gcc PCIE_POR_RESET>,
-			 <&gcc PCIE_PCI_RESET>,
-			 <&gcc PCIE_PHY_RESET>;
-		reset-names = "axi", "ahb", "por", "pci", "phy";
-		pinctrl-0 = <&pcie_pins_default>;
-		pinctrl-names = "default";
-	};
-
-* Example for apq8084
-	pcie0@fc520000 {
-		compatible = "qcom,pcie-apq8084", "snps,dw-pcie";
-		reg = <0xfc520000 0x2000>,
-		      <0xff000000 0x1000>,
-		      <0xff001000 0x1000>,
-		      <0xff002000 0x2000>;
-		reg-names = "parf", "dbi", "elbi", "config";
-		device_type = "pci";
-		linux,pci-domain = <0>;
-		bus-range = <0x00 0xff>;
-		num-lanes = <1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges = <0x81000000 0 0          0xff200000 0 0x00100000   /* I/O */
-			  0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
-		interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-				<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-				<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-				<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-		clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-			 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
-			 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
-			 <&gcc GCC_PCIE_0_AUX_CLK>;
-		clock-names = "iface", "master_bus", "slave_bus", "aux";
-		resets = <&gcc GCC_PCIE_0_BCR>;
-		reset-names = "core";
-		power-domains = <&gcc PCIE0_GDSC>;
-		vdda-supply = <&pma8084_l3>;
-		phys = <&pciephy0>;
-		phy-names = "pciephy";
-		perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
-		pinctrl-0 = <&pcie0_pins_default>;
-		pinctrl-names = "default";
-	};
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
new file mode 100644
index 000000000000..54f07852d279
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -0,0 +1,825 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCI express root complex
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Stanimir Varbanov <svarbanov@mm-sol.com>
+
+description: |
+  Qualcomm PCIe root complex controller is based on the Synopsys DesignWare
+  PCIe IP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-ipq8064
+      - qcom,pcie-ipq8064-v2
+      - qcom,pcie-apq8064
+      - qcom,pcie-apq8084
+      - qcom,pcie-msm8996
+      - qcom,pcie-ipq4019
+      - qcom,pcie-ipq8074
+      - qcom,pcie-qcs404
+      - qcom,pcie-sa8540p
+      - qcom,pcie-sc7280
+      - qcom,pcie-sc8180x
+      - qcom,pcie-sc8280xp
+      - qcom,pcie-sdm845
+      - qcom,pcie-sm8150
+      - qcom,pcie-sm8250
+      - qcom,pcie-sm8450-pcie0
+      - qcom,pcie-sm8450-pcie1
+      - qcom,pcie-ipq6018
+
+  reg:
+    minItems: 4
+    maxItems: 5
+
+  reg-names:
+    minItems: 4
+    maxItems: 5
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 8
+
+  # Common definitions for clocks, clock-names and reset.
+  # Platform constraints are described later.
+  clocks:
+    minItems: 3
+    maxItems: 13
+
+  clock-names:
+    minItems: 3
+    maxItems: 13
+
+  resets:
+    minItems: 1
+    maxItems: 12
+
+  resets-names:
+    minItems: 1
+    maxItems: 12
+
+  vdda-supply:
+    description: A phandle to the core analog power supply
+
+  vdda_phy-supply:
+    description: A phandle to the core analog power supply for PHY
+
+  vdda_refclk-supply:
+    description: A phandle to the core analog power supply for IC which generates reference clock
+
+  vddpe-3v3-supply:
+    description: A phandle to the PCIe endpoint power supply
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pciephy
+
+  power-domains:
+    maxItems: 1
+
+  perst-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO controlled connection to WAKE# signal
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-ipq4019
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064v2
+              - qcom,pcie-ipq8074
+              - qcom,pcie-qcs404
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 4
+        reg-names:
+          items:
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: parf # Qualcomm specific registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq6018
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+        reg-names:
+          items:
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: atu # ATU address space
+            - const: parf # Qualcomm specific registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8084
+              - qcom,pcie-msm8996
+              - qcom,pcie-sdm845
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 4
+        reg-names:
+          items:
+            - const: parf # Qualcomm specific registers
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc7280
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sc8280xp
+              - qcom,pcie-sm8250
+              - qcom,pcie-sm8450-pcie0
+              - qcom,pcie-sm8450-pcie1
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+        reg-names:
+          items:
+            - const: parf # Qualcomm specific registers
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: atu # ATU address space
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064v2
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 5
+        clock-names:
+          minItems: 3
+          items:
+            - const: core # Clocks the pcie hw block
+            - const: iface # Configuration AHB clock
+            - const: phy # Clocks the pcie PHY block
+            - const: aux # Clocks the pcie AUX block, not on apq8064
+            - const: ref # Clocks the pcie ref block, not on apq8064
+        resets:
+          minItems: 5
+          maxItems: 6
+        reset-names:
+          minItems: 5
+          items:
+            - const: axi # AXI reset
+            - const: ahb # AHB reset
+            - const: por # POR reset
+            - const: pci # PCI reset
+            - const: phy # PHY reset
+            - const: ext # EXT reset, not on apq8064
+      required:
+        - vdda-supply
+        - vdda_phy-supply
+        - vdda_refclk-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8084
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: iface # Configuration AHB clock
+            - const: master_bus # Master AXI clock
+            - const: slave_bus # Slave AXI clock
+            - const: aux # Auxiliary (AUX) clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: core # Core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq4019
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux # Auxiliary (AUX) clock
+            - const: master_bus # Master AXI clock
+            - const: slave_bus # Slave AXI clock
+        resets:
+          minItems: 12
+          maxItems: 12
+        reset-names:
+          items:
+            - const: axi_m # AXI master reset
+            - const: axi_s # AXI slave reset
+            - const: pipe # PIPE reset
+            - const: axi_m_vmid # VMID reset
+            - const: axi_s_xpu # XPU reset
+            - const: parf # PARF reset
+            - const: phy # PHY reset
+            - const: axi_m_sticky # AXI sticky reset
+            - const: pipe_sticky # PIPE sticky reset
+            - const: pwr # PWR reset
+            - const: ahb # AHB reset
+            - const: phy_ahb # PHY AHB reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-msm8996
+    then:
+      oneOf:
+        - properties:
+            clock-names:
+              items:
+                - const: pipe # Pipe Clock driving internal logic
+                - const: aux # Auxiliary (AUX) clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+        - properties:
+            clock-names:
+              items:
+                - const: pipe # Pipe Clock driving internal logic
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: cfg # Configuration clock
+                - const: aux # Auxiliary (AUX) clock
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        resets: false
+        reset-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq8074
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: iface # PCIe to SysNOC BIU clock
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: ahb # AHB clock
+            - const: aux # Auxiliary clock
+        resets:
+          minItems: 7
+          maxItems: 7
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sleep # Sleep reset
+            - const: sticky # Core Sticky reset
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: ahb # AHB Reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq6018
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: iface # PCIe to SysNOC BIU clock
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: axi_bridge # AXI bridge clock
+            - const: rchng
+        resets:
+          minItems: 8
+          maxItems: 8
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sleep # Sleep reset
+            - const: sticky # Core Sticky reset
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: ahb # AHB Reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+            - const: axi_s_sticky # AXI Slave Sticky reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-qcs404
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: iface # AHB clock
+            - const: aux # Auxiliary clock
+            - const: master_bus # AXI Master clock
+            - const: slave_bus # AXI Slave clock
+        resets:
+          minItems: 6
+          maxItems: 6
+        reset-names:
+          items:
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+            - const: pipe_sticky # PIPE sticky reset
+            - const: pwr # PWR reset
+            - const: ahb # AHB reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc7280
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: tbu # PCIe TBU clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sdm845
+    then:
+      oneOf:
+          # Unfortunately the "optional" ref clock is used in the middle of the list
+        - properties:
+            clocks:
+              minItems: 8
+              maxItems: 8
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: ref # REFERENCE clock
+                - const: tbu # PCIe TBU clock
+        - properties:
+            clocks:
+              minItems: 7
+              maxItems: 7
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: tbu # PCIe TBU clock
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sm8150
+              - qcom,pcie-sm8250
+    then:
+      oneOf:
+          # Unfortunately the "optional" ref clock is used in the middle of the list
+        - properties:
+            clocks:
+              minItems: 9
+              maxItems: 9
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: ref # REFERENCE clock
+                - const: tbu # PCIe TBU clock
+                - const: ddrss_sf_tbu # PCIe SF TBU clock
+        - properties:
+            clocks:
+              minItems: 8
+              maxItems: 8
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: tbu # PCIe TBU clock
+                - const: ddrss_sf_tbu # PCIe SF TBU clock
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8450-pcie0
+    then:
+      properties:
+        clocks:
+          minItems: 12
+          maxItems: 12
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre0 # Aggre NoC PCIe0 AXI clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8450-pcie1
+    then:
+      properties:
+        clocks:
+          minItems: 11
+          maxItems: 11
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sa8540p
+              - qcom,pcie-sc8280xp
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 9
+        clock-names:
+          minItems: 8
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: noc_aggr_4 # NoC aggregate 4 clock
+            - const: noc_aggr_south_sf # NoC aggregate South SF clock
+            - const: cnoc_qx # Configuration NoC QX clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,pcie-apq8064
+                - qcom,pcie-ipq4019
+                - qcom,pcie-ipq8064
+                - qcom,pcie-ipq8064v2
+                - qcom,pcie-ipq8074
+                - qcom,pcie-qcs404
+    then:
+      required:
+        - power-domains
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,pcie-msm8996
+    then:
+      required:
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-msm8996
+              - qcom,pcie-sc7280
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sdm845
+              - qcom,pcie-sm8150
+              - qcom,pcie-sm8250
+              - qcom,pcie-sm8450-pcie0
+              - qcom,pcie-sm8450-pcie1
+    then:
+      oneOf:
+        - properties:
+            interrupts:
+              maxItems: 1
+            interrupt-names:
+              items:
+                - const: msi
+        - properties:
+            interrupts:
+              minItems: 8
+            interrupt-names:
+              items:
+                - const: msi0
+                - const: msi1
+                - const: msi2
+                - const: msi3
+                - const: msi4
+                - const: msi5
+                - const: msi6
+                - const: msi7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8280xp
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: msi0
+            - const: msi1
+            - const: msi2
+            - const: msi3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-apq8084
+              - qcom,pcie-ipq4019
+              - qcom,pcie-ipq6018
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064-v2
+              - qcom,pcie-ipq8074
+              - qcom,pcie-qcs404
+              - qcom,pcie-sa8540p
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: msi
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie@1b500000 {
+      compatible = "qcom,pcie-ipq8064";
+      reg = <0x1b500000 0x1000>,
+            <0x1b502000 0x80>,
+            <0x1b600000 0x100>,
+            <0x0ff00000 0x100000>;
+      reg-names = "dbi", "elbi", "parf", "config";
+      device_type = "pci";
+      linux,pci-domain = <0>;
+      bus-range = <0x00 0xff>;
+      num-lanes = <1>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>,
+               <0x82000000 0 0 0x08000000 0 0x07e00000>;
+      interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "msi";
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&gcc 41>,
+               <&gcc 43>,
+               <&gcc 44>,
+               <&gcc 42>,
+               <&gcc 248>;
+      clock-names = "core", "iface", "phy", "aux", "ref";
+      resets = <&gcc 27>,
+               <&gcc 26>,
+               <&gcc 25>,
+               <&gcc 24>,
+               <&gcc 23>,
+               <&gcc 22>;
+      reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+      pinctrl-0 = <&pcie_pins_default>;
+      pinctrl-names = "default";
+      vdda-supply = <&pm8921_s3>;
+      vdda_phy-supply = <&pm8921_lvs6>;
+      vdda_refclk-supply = <&ext_3p3v>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+    pcie@fc520000 {
+      compatible = "qcom,pcie-apq8084";
+      reg = <0xfc520000 0x2000>,
+            <0xff000000 0x1000>,
+            <0xff001000 0x1000>,
+            <0xff002000 0x2000>;
+      reg-names = "parf", "dbi", "elbi", "config";
+      device_type = "pci";
+      linux,pci-domain = <0>;
+      bus-range = <0x00 0xff>;
+      num-lanes = <1>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0          0xff200000 0 0x00100000>,
+               <0x82000000 0 0x00300000 0xff300000 0 0x00d00000>;
+      interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "msi";
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&gcc 324>,
+               <&gcc 325>,
+               <&gcc 327>,
+               <&gcc 323>;
+      clock-names = "iface", "master_bus", "slave_bus", "aux";
+      resets = <&gcc 81>;
+      reset-names = "core";
+      power-domains = <&gcc 1>;
+      vdda-supply = <&pma8084_l3>;
+      phys = <&pciephy0>;
+      phy-names = "pciephy";
+      perst-gpios = <&tlmm 70 GPIO_ACTIVE_LOW>;
+      pinctrl-0 = <&pcie0_pins_default>;
+      pinctrl-names = "default";
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
new file mode 100644
index 000000000000..32a3b7665ff5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Renesas Electronics Europe GmbH - https://www.renesas.com/eu/en/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car PCIe Endpoint
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-pcie-ep     # RZ/G2M
+          - renesas,r8a774b1-pcie-ep     # RZ/G2N
+          - renesas,r8a774c0-pcie-ep     # RZ/G2E
+          - renesas,r8a774e1-pcie-ep     # RZ/G2H
+          - renesas,r8a7795-pcie-ep      # R-Car H3
+      - const: renesas,rcar-gen3-pcie-ep # R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: apb-base
+      - const: memory0
+      - const: memory1
+      - const: memory2
+      - const: memory3
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pcie
+
+  max-functions:
+    minimum: 1
+    maximum: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - resets
+  - power-domains
+  - clocks
+  - clock-names
+  - max-functions
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a774c0-sysc.h>
+
+     pcie0_ep: pcie-ep@fe000000 {
+            compatible = "renesas,r8a774c0-pcie-ep",
+                         "renesas,rcar-gen3-pcie-ep";
+            reg = <0xfe000000 0x80000>,
+                  <0xfe100000 0x100000>,
+                  <0xfe200000 0x200000>,
+                  <0x30000000 0x8000000>,
+                  <0x38000000 0x8000000>;
+            reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+            interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&cpg 319>;
+            power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+            clocks = <&cpg CPG_MOD 319>;
+            clock-names = "pcie";
+            max-functions = /bits/ 8 <1>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
new file mode 100644
index 000000000000..8fdfbc763d70
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car PCIe Host
+
+maintainers:
+  - Marek Vasut <marek.vasut+renesas@gmail.com>
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: pci-bus.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: renesas,pcie-r8a7779       # R-Car H1
+      - items:
+          - enum:
+              - renesas,pcie-r8a7742      # RZ/G1H
+              - renesas,pcie-r8a7743      # RZ/G1M
+              - renesas,pcie-r8a7744      # RZ/G1N
+              - renesas,pcie-r8a7790      # R-Car H2
+              - renesas,pcie-r8a7791      # R-Car M2-W
+              - renesas,pcie-r8a7793      # R-Car M2-N
+          - const: renesas,pcie-rcar-gen2 # R-Car Gen2 and RZ/G1
+      - items:
+          - enum:
+              - renesas,pcie-r8a774a1     # RZ/G2M
+              - renesas,pcie-r8a774b1     # RZ/G2N
+              - renesas,pcie-r8a774c0     # RZ/G2E
+              - renesas,pcie-r8a774e1     # RZ/G2H
+              - renesas,pcie-r8a7795      # R-Car H3
+              - renesas,pcie-r8a7796      # R-Car M3-W
+              - renesas,pcie-r8a77961     # R-Car M3-W+
+              - renesas,pcie-r8a77965     # R-Car M3-N
+              - renesas,pcie-r8a77980     # R-Car V3H
+              - renesas,pcie-r8a77990     # R-Car E3
+          - const: renesas,pcie-rcar-gen3 # R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pcie
+      - const: pcie_bus
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: renesas,pcie-r8a7779
+then:
+  required:
+    - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@fe000000 {
+            compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
+            reg = <0 0xfe000000 0 0x80000>;
+             #address-cells = <3>;
+             #size-cells = <2>;
+             bus-range = <0x00 0xff>;
+             device_type = "pci";
+             ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+                      <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+                      <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+                      <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+             dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>,
+                          <0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>;
+             interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                          <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                          <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+             #interrupt-cells = <1>;
+             interrupt-map-mask = <0 0 0 0>;
+             interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+             clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+             clock-names = "pcie", "pcie_bus";
+             power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+             resets = <&cpg 319>;
+         };
+    };
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
deleted file mode 100644
index 12702c8c46ce..000000000000
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Renesas R-Car PCIe interface
-
-Required properties:
-compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
-	    "renesas,pcie-r8a7744" for the R8A7744 SoC;
-	    "renesas,pcie-r8a774a1" for the R8A774A1 SoC;
-	    "renesas,pcie-r8a774b1" for the R8A774B1 SoC;
-	    "renesas,pcie-r8a774c0" for the R8A774C0 SoC;
-	    "renesas,pcie-r8a7779" for the R8A7779 SoC;
-	    "renesas,pcie-r8a7790" for the R8A7790 SoC;
-	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
-	    "renesas,pcie-r8a7793" for the R8A7793 SoC;
-	    "renesas,pcie-r8a7795" for the R8A7795 SoC;
-	    "renesas,pcie-r8a7796" for the R8A7796 SoC;
-	    "renesas,pcie-r8a77980" for the R8A77980 SoC;
-	    "renesas,pcie-r8a77990" for the R8A77990 SoC;
-	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or
-				     RZ/G1 compatible device.
-	    "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 or
-				     RZ/G2 compatible device.
-
-	    When compatible with the generic version, nodes must list the
-	    SoC-specific version corresponding to the platform first
-	    followed by the generic version.
-
-- reg: base address and length of the PCIe controller registers.
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- bus-range: PCI bus numbers covered
-- device_type: set to "pci"
-- ranges: ranges for the PCI memory and I/O regions.
-- dma-ranges: ranges for the inbound memory regions.
-- interrupts: two interrupt sources for MSI interrupts, followed by interrupt
-	source for hardware related interrupts (e.g. link speed change).
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map: standard PCI properties
-	to define the mapping of the PCIe interface to interrupt numbers.
-- clocks: from common clock binding: clock specifiers for the PCIe controller
-	and PCIe bus clocks.
-- clock-names: from common clock binding: should be "pcie" and "pcie_bus".
-
-Optional properties:
-- phys: from common PHY binding: PHY phandle and specifier (only make sense
-	for R-Car gen3 SoCs where the PCIe PHYs have their own register blocks).
-- phy-names: from common PHY binding: should be "pcie".
-
-Example:
-
-SoC-specific DT Entry:
-
-	pcie: pcie@fe000000 {
-		compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
-		reg = <0 0xfe000000 0 0x80000>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		bus-range = <0x00 0xff>;
-		device_type = "pci";
-		ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-			  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-			  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-			  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
-		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000
-			      0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>;
-		interrupts = <0 116 4>, <0 117 4>, <0 118 4>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic 0 116 4>;
-		clocks = <&mstp3_clks R8A7791_CLK_PCIE>, <&pcie_bus_clk>;
-		clock-names = "pcie", "pcie_bus";
-	};
diff --git a/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
new file mode 100644
index 000000000000..0f18cceba3d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/renesas,pci-rcar-gen2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas AHB to PCI bridge
+
+maintainers:
+  - Marek Vasut <marek.vasut+renesas@gmail.com>
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description: |
+  This is the bridge used internally to connect the USB controllers to the
+  AHB. There is one bridge instance per USB port connected to the internal
+  OHCI and EHCI controllers.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,pci-r8a7742      # RZ/G1H
+              - renesas,pci-r8a7743      # RZ/G1M
+              - renesas,pci-r8a7744      # RZ/G1N
+              - renesas,pci-r8a7745      # RZ/G1E
+              - renesas,pci-r8a7790      # R-Car H2
+              - renesas,pci-r8a7791      # R-Car M2-W
+              - renesas,pci-r8a7793      # R-Car M2-N
+              - renesas,pci-r8a7794      # R-Car E2
+          - const: renesas,pci-rcar-gen2 # R-Car Gen2 and RZ/G1
+      - items:
+          - enum:
+              - renesas,pci-r9a06g032     # RZ/N1D
+          - const: renesas,pci-rzn1       # RZ/N1
+
+  reg:
+    items:
+      - description: Operational registers for the OHCI/EHCI controllers.
+      - description: Bridge configuration and control registers.
+
+  interrupts:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  bus-range:
+    description: |
+      The PCI bus number range; as this is a single bus, the range
+      should be specified as the same value twice.
+
+  dma-ranges:
+    description: |
+      A single range for the inbound memory region. If not supplied,
+      defaults to 1GiB at 0x40000000. Note there are hardware restrictions on
+      the allowed combinations of address and size.
+    maxItems: 1
+
+patternProperties:
+  'usb@[0-1],0':
+    type: object
+
+    description:
+      This a USB controller PCI device
+
+    properties:
+      reg:
+        description:
+          Identify the correct bus, device and function number in the
+          form <bdf 0 0 0 0>.
+
+        items:
+          minItems: 5
+          maxItems: 5
+
+      phys:
+        description:
+          Reference to the USB phy
+        maxItems: 1
+
+      phy-names:
+        maxItems: 1
+
+    required:
+      - reg
+      - phys
+      - phy-names
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-map
+  - interrupt-map-mask
+  - clocks
+  - power-domains
+  - bus-range
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,pci-rzn1
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Internal bus clock (AHB) for HOST
+            - description: Internal bus clock (AHB) Power Management
+            - description: PCI clock for USB subsystem
+        clock-names:
+          items:
+            - const: hclkh
+            - const: hclkpm
+            - const: pciclk
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Device clock
+        clock-names:
+          items:
+            - const: pclk
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    pci@ee090000  {
+        compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
+        device_type = "pci";
+        reg = <0xee090000 0xc00>,
+              <0xee080000 0x1100>;
+        clocks = <&cpg CPG_MOD 703>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 703>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+        bus-range = <0 0>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        ranges = <0x02000000 0 0xee080000 0xee080000 0 0x00010000>;
+        dma-ranges = <0x42000000 0 0x40000000 0x40000000 0 0x40000000>;
+        interrupt-map-mask = <0xf800 0 0 0x7>;
+        interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+        usb@1,0 {
+            reg = <0x800 0 0 0 0>;
+            phys = <&usb0 0>;
+            phy-names = "usb";
+        };
+
+        usb@2,0 {
+            reg = <0x1000 0 0 0 0>;
+            phys = <&usb0 0>;
+            phy-names = "usb";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
new file mode 100644
index 000000000000..bc0a9d1db750
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe controller on Rockchip SoCs
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+  - Simon Xue <xxm@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |+
+  RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
+  PCIe IP and thus inherits all the common properties defined in
+  designware-pcie.txt.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: rockchip,rk3568-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers
+      - description: Rockchip designed configuration registers
+      - description: Config registers
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: apb
+      - const: config
+
+  clocks:
+    items:
+      - description: AHB clock for PCIe master
+      - description: AHB clock for PCIe slave
+      - description: AHB clock for PCIe dbi
+      - description: APB clock for PCIe
+      - description: Auxiliary clock for PCIe
+
+  clock-names:
+    items:
+      - const: aclk_mst
+      - const: aclk_slv
+      - const: aclk_dbi
+      - const: pclk
+      - const: aux
+
+  msi-map: true
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  power-domains:
+    maxItems: 1
+
+  ranges:
+    maxItems: 2
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: pipe
+
+  vpcie3v3-supply: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - msi-map
+  - num-lanes
+  - phys
+  - phy-names
+  - power-domains
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie3x2: pcie@fe280000 {
+            compatible = "rockchip,rk3568-pcie";
+            reg = <0x3 0xc0800000 0x0 0x390000>,
+                  <0x0 0xfe280000 0x0 0x10000>,
+                  <0x3 0x80000000 0x0 0x100000>;
+            reg-names = "dbi", "apb", "config";
+            bus-range = <0x20 0x2f>;
+            clocks = <&cru 143>, <&cru 144>,
+                     <&cru 145>, <&cru 146>,
+                     <&cru 147>;
+            clock-names = "aclk_mst", "aclk_slv",
+                          "aclk_dbi", "pclk",
+                          "aux";
+            device_type = "pci";
+            linux,pci-domain = <2>;
+            max-link-speed = <2>;
+            msi-map = <0x2000 &its 0x2000 0x1000>;
+            num-lanes = <2>;
+            phys = <&pcie30phy>;
+            phy-names = "pcie-phy";
+            power-domains = <&power 15>;
+            ranges = <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>,
+                     <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>;
+            resets = <&cru 193>;
+            reset-names = "pipe";
+            #address-cells = <3>;
+            #size-cells = <2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
new file mode 100644
index 000000000000..f20ed7e709f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series PCIe Host Controller
+
+maintainers:
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Jaehoon Chung <jh80.chung@samsung.com>
+
+description: |+
+  Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare
+  PCIe IP and thus inherits all the common properties defined in
+  snps,dw-pcie.yaml.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: samsung,exynos5433-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: External Local Bus interface (ELBI) registers.
+      - description: PCIe configuration space region.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: elbi
+      - const: config
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PCIe bridge clock
+      - description: PCIe bus clock
+
+  clock-names:
+    items:
+      - const: pcie
+      - const: pcie_bus
+
+  phys:
+    maxItems: 1
+
+  vdd10-supply:
+    description:
+      Phandle to a regulator that provides 1.0V power to the PCIe block.
+
+  vdd18-supply:
+    description:
+      Phandle to a regulator that provides 1.8V power to the PCIe block.
+
+  num-lanes:
+    const: 1
+
+  num-viewport:
+    const: 3
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - ranges
+  - bus-range
+  - device_type
+  - num-lanes
+  - num-viewport
+  - clocks
+  - clock-names
+  - phys
+  - vdd10-supply
+  - vdd18-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/exynos5433.h>
+
+    pcie: pcie@15700000 {
+        compatible = "samsung,exynos5433-pcie";
+        reg = <0x15700000 0x1000>, <0x156b0000 0x1000>, <0x0c000000 0x1000>;
+        reg-names = "dbi", "elbi", "config";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        device_type = "pci";
+        interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>;
+        clock-names = "pcie", "pcie_bus";
+        phys = <&pcie_phy>;
+        pinctrl-0 = <&pcie_bus &pcie_wlanen>;
+        pinctrl-names = "default";
+        num-lanes = <1>;
+        num-viewport = <3>;
+        bus-range = <0x00 0xff>;
+        ranges = <0x81000000 0 0	  0x0c001000 0 0x00010000>,
+                 <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
+        vdd10-supply = <&ldo6_reg>;
+        vdd18-supply = <&ldo7_reg>;
+        interrupt-map-mask = <0 0 0 0>;
+        interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
deleted file mode 100644
index 651d957d1051..000000000000
--- a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Samsung Exynos 5440 PCIe interface
-
-This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in designware-pcie.txt.
-
-Required properties:
-- compatible: "samsung,exynos5440-pcie"
-- reg: base addresses and lengths of the PCIe controller,
-- reg-names : First name should be set to "elbi".
-	And use the "config" instead of getting the configuration address space
-	from "ranges".
-	NOTE: When using the "config" property, reg-names must be set.
-- interrupts: A list of interrupt outputs for level interrupt,
-	pulse interrupt, special interrupt.
-- phys: From PHY binding. Phandle for the generic PHY.
-	Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt
-
-For other common properties, refer to
-	Documentation/devicetree/bindings/pci/designware-pcie.txt
-
-Example:
-
-SoC-specific DT Entry (with using PHY framework):
-
-	pcie_phy0: pcie-phy@270000 {
-		...
-		reg = <0x270000 0x1000>, <0x271000 0x40>;
-		reg-names = "phy", "block";
-		...
-	};
-
-	pcie@290000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x290000 0x1000>, <0x40000000 0x1000>;
-		reg-names = "elbi", "config";
-		clocks = <&clock 28>, <&clock 27>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		phys = <&pcie_phy0>;
-		ranges = <0x81000000 0 0	  0x60001000 0 0x00010000
-			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		num-lanes = <4>;
-	};
-
-Board-specific DT Entry:
-
-	pcie@290000 {
-		reset-gpio = <&pin_ctrl 5 0>;
-	};
-
-	pcie@2a0000 {
-		reset-gpio = <&pin_ctrl 22 0>;
-	};
diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
new file mode 100644
index 000000000000..844fc7142302
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/sifive,fu740-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU740 PCIe host controller
+
+description: |+
+  SiFive FU740 PCIe host controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+  - Greentime Hu <greentime.hu@sifive.com>
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: sifive,fu740-pcie
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: mgmt
+
+  dma-coherent: true
+
+  num-lanes:
+    const: 8
+
+  msi-parent: true
+
+  interrupt-names:
+    items:
+      - const: msi
+      - const: inta
+      - const: intb
+      - const: intc
+      - const: intd
+
+  resets:
+    description: A phandle to the PCIe power up reset line.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pcie_aux
+
+  pwren-gpios:
+    description: Should specify the GPIO for controlling the PCI bus device power on.
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - dma-coherent
+  - num-lanes
+  - interrupts
+  - interrupt-names
+  - interrupt-map-mask
+  - interrupt-map
+  - clocks
+  - clock-names
+  - resets
+  - pwren-gpios
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        #include <dt-bindings/clock/sifive-fu740-prci.h>
+
+        pcie@e00000000 {
+            compatible = "sifive,fu740-pcie";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            reg = <0xe 0x00000000 0x0 0x80000000>,
+                  <0xd 0xf0000000 0x0 0x10000000>,
+                  <0x0 0x100d0000 0x0 0x1000>;
+            reg-names = "dbi", "config", "mgmt";
+            device_type = "pci";
+            dma-coherent;
+            bus-range = <0x0 0xff>;
+            ranges = <0x81000000  0x0 0x60080000  0x0 0x60080000 0x0 0x10000>,      /* I/O */
+                     <0x82000000  0x0 0x60090000  0x0 0x60090000 0x0 0xff70000>,    /* mem */
+                     <0x82000000  0x0 0x70000000  0x0 0x70000000 0x0 0x1000000>,    /* mem */
+                     <0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>;  /* mem prefetchable */
+            num-lanes = <0x8>;
+            interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>;
+            interrupt-names = "msi", "inta", "intb", "intc", "intd";
+            interrupt-parent = <&plic0>;
+            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+            interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>,
+                            <0x0 0x0 0x0 0x2 &plic0 58>,
+                            <0x0 0x0 0x0 0x3 &plic0 59>,
+                            <0x0 0x0 0x0 0x4 &plic0 60>;
+            clock-names = "pcie_aux";
+            clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
+            resets = <&prci 4>;
+            pwren-gpios = <&gpio 5 0>;
+            reset-gpios = <&gpio 8 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
new file mode 100644
index 000000000000..b78535040f04
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare PCIe endpoint interface
+
+maintainers:
+  - Jingoo Han <jingoohan1@gmail.com>
+  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description: |
+  Synopsys DesignWare PCIe host controller endpoint
+
+allOf:
+  - $ref: /schemas/pci/pci-ep.yaml#
+
+properties:
+  compatible:
+    anyOf:
+      - {}
+      - const: snps,dw-pcie-ep
+
+  reg:
+    description: |
+      It should contain Data Bus Interface (dbi) and config registers for all
+      versions.
+      For designware core version >= 4.80, it may contain ATU address space.
+    minItems: 2
+    maxItems: 4
+
+  reg-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl]
+
+  reset-gpio:
+    description: GPIO pin number of PERST# signal
+    maxItems: 1
+    deprecated: true
+
+  reset-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  snps,enable-cdm-check:
+    type: boolean
+    description: |
+      This is a boolean property and if present enables
+      automatic checking of CDM (Configuration Dependent Module) registers
+      for data corruption. CDM registers include standard PCIe configuration
+      space registers, Port Logic registers, DMA and iATU (internal Address
+      Translation Unit) registers.
+
+  num-ib-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 256
+    description: number of inbound address translation windows
+    deprecated: true
+
+  num-ob-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 256
+    description: number of outbound address translation windows
+    deprecated: true
+
+required:
+  - reg
+  - reg-names
+  - compatible
+
+additionalProperties: true
+
+examples:
+  - |
+    bus {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      pcie-ep@dfd00000 {
+        compatible = "snps,dw-pcie-ep";
+        reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
+              <0xdfc01000 0x0001000>, /* IP registers 2 */
+              <0xd0000000 0x2000000>; /* Configuration space */
+        reg-names = "dbi", "dbi2", "addr_space";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
new file mode 100644
index 000000000000..7287d395e1b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare PCIe interface
+
+maintainers:
+  - Jingoo Han <jingoohan1@gmail.com>
+  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description: |
+  Synopsys DesignWare PCIe host controller
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    anyOf:
+      - {}
+      - const: snps,dw-pcie
+
+  reg:
+    description: |
+      It should contain Data Bus Interface (dbi) and config registers for all
+      versions.
+      For designware core version >= 4.80, it may contain ATU address space.
+    minItems: 2
+    maxItems: 5
+
+  reg-names:
+    minItems: 2
+    maxItems: 5
+    items:
+      enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl,
+              parf, cfg, link, ulreg, smu, mpu, apb, phy ]
+
+  num-lanes:
+    description: |
+      number of lanes to use (this property should be specified unless
+      the link is brought already up in firmware)
+    maximum: 16
+
+  reset-gpio:
+    description: GPIO pin number of PERST# signal
+    maxItems: 1
+    deprecated: true
+
+  reset-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  interrupts: true
+
+  interrupt-names: true
+
+  clocks: true
+
+  snps,enable-cdm-check:
+    type: boolean
+    description: |
+      This is a boolean property and if present enables
+      automatic checking of CDM (Configuration Dependent Module) registers
+      for data corruption. CDM registers include standard PCIe configuration
+      space registers, Port Logic registers, DMA and iATU (internal Address
+      Translation Unit) registers.
+
+  num-viewport:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 256
+    description: |
+      number of view ports configured in hardware. If a platform
+      does not specify it, the driver autodetects it.
+    deprecated: true
+
+additionalProperties: true
+
+required:
+  - reg
+  - reg-names
+  - compatible
+
+examples:
+  - |
+    bus {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      pcie@dfc00000 {
+        device_type = "pci";
+        compatible = "snps,dw-pcie";
+        reg = <0xdfc00000 0x0001000>, /* IP registers */
+              <0xd0000000 0x0002000>; /* Configuration space */
+        reg-names = "dbi", "config";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
+                 <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+        interrupts = <25>, <24>;
+        #interrupt-cells = <1>;
+        num-lanes = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
new file mode 100644
index 000000000000..437e61618d06
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe endpoint controller
+
+description: |
+  UniPhier PCIe endpoint controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro5-pcie-ep
+      - socionext,uniphier-nx1-pcie-ep
+
+  reg:
+    minItems: 4
+    maxItems: 5
+
+  reg-names:
+    oneOf:
+      - items:
+          - const: dbi
+          - const: dbi2
+          - const: link
+          - const: addr_space
+      - items:
+          - const: dbi
+          - const: dbi2
+          - const: link
+          - const: addr_space
+          - const: atu
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:              # for Pro5
+          - const: gio
+          - const: link
+      - const: link         # for NX1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    oneOf:
+      - items:              # for Pro5
+          - const: gio
+          - const: link
+      - const: link         # for NX1
+
+  num-ib-windows:
+    const: 16
+
+  num-ob-windows:
+    const: 16
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pcie_ep: pcie-ep@66000000 {
+        compatible = "socionext,uniphier-pro5-pcie-ep";
+        reg-names = "dbi", "dbi2", "link", "addr_space";
+        reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
+              <0x66010000 0x10000>, <0x67000000 0x400000>;
+        clock-names = "gio", "link";
+        clocks = <&sys_clk 12>, <&sys_clk 24>;
+        reset-names = "gio", "link";
+        resets = <&sys_rst 12>, <&sys_rst 24>;
+        num-ib-windows = <16>;
+        num-ob-windows = <16>;
+        num-lanes = <4>;
+        phy-names = "pcie-phy";
+        phys = <&pcie_phy>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
new file mode 100644
index 000000000000..638b99db0433
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe host controller
+
+description: |
+  UniPhier PCIe host controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pcie
+
+  reg:
+    minItems: 3
+    maxItems: 4
+
+  reg-names:
+    minItems: 3
+    items:
+      - const: dbi
+      - const: link
+      - const: config
+      - const: atu
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  num-viewport: true
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  interrupt-controller:
+    type: object
+    additionalProperties: false
+
+    properties:
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupts:
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        gic: interrupt-controller {
+            interrupt-controller;
+            #interrupt-cells = <3>;
+        };
+    };
+
+    pcie: pcie@66000000 {
+        compatible = "socionext,uniphier-pcie";
+        reg-names = "dbi", "link", "config";
+        reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        clocks = <&sys_clk 24>;
+        resets = <&sys_rst 24>;
+        num-lanes = <1>;
+        num-viewport = <1>;
+        bus-range = <0x0 0xff>;
+        device_type = "pci";
+        ranges = <0x81000000 0 0x00000000  0x2ffe0000  0 0x00010000>,
+                 <0x82000000 0 0x00000000  0x20000000  0 0x0ffe0000>;
+        phy-names = "pcie-phy";
+        phys = <&pcie_phy>;
+        #interrupt-cells = <1>;
+        interrupt-names = "dma", "msi";
+        interrupt-parent = <&gic>;
+        interrupts = <0 224 4>, <0 225 4>;
+        interrupt-map-mask = <0 0 0  7>;
+        interrupt-map = <0 0 0  1  &pcie_intc 0>,
+                        <0 0 0  2  &pcie_intc 1>,
+                        <0 0 0  3  &pcie_intc 2>,
+                        <0 0 0  4  &pcie_intc 3>;
+
+        pcie_intc: interrupt-controller {
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&gic>;
+            interrupts = <0 226 4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/tango-pcie.txt b/Documentation/devicetree/bindings/pci/tango-pcie.txt
deleted file mode 100644
index 244683836a79..000000000000
--- a/Documentation/devicetree/bindings/pci/tango-pcie.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Sigma Designs Tango PCIe controller
-
-Required properties:
-
-- compatible: "sigma,smp8759-pcie"
-- reg: address/size of PCI configuration space, address/size of register area
-- bus-range: defined by size of PCI configuration space
-- device_type: "pci"
-- #size-cells: <2>
-- #address-cells: <3>
-- msi-controller
-- ranges: translation from system to bus addresses
-- interrupts: spec for misc interrupts, spec for MSI
-
-Example:
-
-	pcie@2e000 {
-		compatible = "sigma,smp8759-pcie";
-		reg = <0x50000000 0x400000>, <0x2e000 0x100>;
-		bus-range = <0 3>;
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		msi-controller;
-		ranges = <0x02000000 0x0 0x00400000  0x50400000  0x0 0x3c00000>;
-		interrupts =
-			<54 IRQ_TYPE_LEVEL_HIGH>, /* misc interrupts */
-			<55 IRQ_TYPE_LEVEL_HIGH>; /* MSI */
-	};
diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml
new file mode 100644
index 000000000000..74195c1f5292
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,am65-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM65 PCI Endpoint
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: pci-ep.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am654-pcie-ep
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: app
+      - const: dbics
+      - const: addr_space
+      - const: atu
+
+  power-domains:
+    maxItems: 1
+
+  ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
+    description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
+
+  interrupts:
+    minItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - max-link-speed
+  - power-domains
+  - ti,syscon-pcie-mode
+  - dma-coherent
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    pcie0_ep: pcie-ep@5500000 {
+        compatible = "ti,am654-pcie-ep";
+        reg =  <0x5500000 0x1000>,
+               <0x5501000 0x1000>,
+               <0x10000000 0x8000000>,
+               <0x5506000 0x1000>;
+        reg-names = "app", "dbics", "addr_space", "atu";
+        power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
+        max-link-speed = <2>;
+        dma-coherent;
+        interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
new file mode 100644
index 000000000000..a20dccbafd94
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,am65-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM65 PCI Host
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am654-pcie-rc
+      - ti,keystone-pcie
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: app
+      - const: dbics
+      - const: config
+      - const: atu
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ti,syscon-pcie-id:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_device_id register offset within SYSCON
+    description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID
+
+  ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
+    description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
+
+  msi-map: true
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - max-link-speed
+  - ti,syscon-pcie-id
+  - ti,syscon-pcie-mode
+  - ranges
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,am654-pcie-rc
+then:
+  required:
+    - dma-coherent
+    - power-domains
+    - msi-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    pcie0_rc: pcie@5500000 {
+        compatible = "ti,am654-pcie-rc";
+        reg =  <0x5500000 0x1000>,
+               <0x5501000 0x1000>,
+               <0x10000000 0x2000>,
+               <0x5506000 0x1000>;
+        reg-names = "app", "dbics", "config", "atu";
+        power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x81000000 0 0          0x10020000 0 0x00010000>,
+                 <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>;
+        ti,syscon-pcie-id = <&scm_conf 0x0210>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
+        bus-range = <0x0 0xff>;
+        max-link-speed = <2>;
+        dma-coherent;
+        interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+        msi-map = <0x0 &gic_its 0x0 0x10000>;
+        device_type = "pci";
+    };
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
new file mode 100644
index 000000000000..aed437dac363
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-ep.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E PCI EP (PCIe Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: "cdns-pcie-ep.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,j721e-pcie-ep
+      - description: PCIe EP controller in AM64
+        items:
+          - const: ti,am64-pcie-ep
+          - const: ti,j721e-pcie-ep
+      - description: PCIe EP controller in J7200
+        items:
+          - const: ti,j7200-pcie-ep
+          - const: ti,j721e-pcie-ep
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: intd_cfg
+      - const: user_cfg
+      - const: reg
+      - const: mem
+
+  ti,syscon-pcie-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
+    description: Specifier for configuring PCIe mode and link speed.
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: clock-specifier to represent input to the PCIe
+
+  clock-names:
+    items:
+      - const: fck
+
+  dma-coherent:
+    description: Indicates that the PCIe IP block can ensure the coherency
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,syscon-pcie-ctrl
+  - max-link-speed
+  - num-lanes
+  - power-domains
+  - clocks
+  - clock-names
+  - max-functions
+  - phys
+  - phy-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie0_ep: pcie-ep@d000000 {
+           compatible = "ti,j721e-pcie-ep";
+           reg = <0x00 0x02900000 0x00 0x1000>,
+                 <0x00 0x02907000 0x00 0x400>,
+                 <0x00 0x0d000000 0x00 0x00800000>,
+                 <0x00 0x10000000 0x00 0x08000000>;
+           reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+           ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>;
+           max-link-speed = <3>;
+           num-lanes = <2>;
+           power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+           clocks = <&k3_clks 239 1>;
+           clock-names = "fck";
+           max-functions = /bits/ 8 <6>;
+           dma-coherent;
+           phys = <&serdes0_pcie_link>;
+           phy-names = "pcie-phy";
+       };
+    };
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
new file mode 100644
index 000000000000..2115d5a3f0e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E PCI Host (PCIe Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: "cdns-pcie-host.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,j721e-pcie-host
+      - description: PCIe controller in AM64
+        items:
+          - const: ti,am64-pcie-host
+          - const: ti,j721e-pcie-host
+      - description: PCIe controller in J7200
+        items:
+          - const: ti,j7200-pcie-host
+          - const: ti,j721e-pcie-host
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: intd_cfg
+      - const: user_cfg
+      - const: reg
+      - const: cfg
+
+  ti,syscon-pcie-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
+    description: Specifier for configuring PCIe mode and link speed.
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    description: |+
+      clock-specifier to represent input to the PCIe for 1 item.
+      2nd item if present represents reference clock to the connector.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: fck
+      - const: pcie_refclk
+
+  dma-coherent: true
+
+  vendor-id:
+    const: 0x104c
+
+  device-id:
+    oneOf:
+      - items:
+          - const: 0xb00d
+      - items:
+          - const: 0xb00f
+      - items:
+          - const: 0xb010
+
+  msi-map: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,syscon-pcie-ctrl
+  - max-link-speed
+  - num-lanes
+  - power-domains
+  - clocks
+  - clock-names
+  - vendor-id
+  - device-id
+  - msi-map
+  - dma-ranges
+  - ranges
+  - reset-gpios
+  - phys
+  - phy-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie0_rc: pcie@2900000 {
+            compatible = "ti,j721e-pcie-host";
+            reg = <0x00 0x02900000 0x00 0x1000>,
+                  <0x00 0x02907000 0x00 0x400>,
+                  <0x00 0x0d000000 0x00 0x00800000>,
+                  <0x00 0x10000000 0x00 0x00001000>;
+            reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+            ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>;
+            max-link-speed = <3>;
+            num-lanes = <2>;
+            power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 239 1>;
+            clock-names = "fck";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x0 0xf>;
+            vendor-id = <0x104c>;
+            device-id = <0xb00d>;
+            msi-map = <0x0 &gic_its 0x0 0x10000>;
+            dma-coherent;
+            reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+            phys = <&serdes0_pcie_link>;
+            phy-names = "pcie-phy";
+            ranges = <0x01000000 0x0 0x10001000  0x00 0x10001000  0x0 0x0010000>,
+                     <0x02000000 0x0 0x10011000  0x00 0x10011000  0x0 0x7fef000>;
+            dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index d5cbfe6b0d89..8147e3e3e29b 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -12,7 +12,7 @@ PCIe DesignWare Controller
 	       number of PHYs as specified in *phys* property.
  - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
 	       where <X> is the instance number of the pcie from the HW spec.
- - num-lanes as specified in ../designware-pcie.txt
+ - num-lanes as specified in ../snps,dw-pcie.yaml
  - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control
 			module and the register offset to specify lane
 			selection.
@@ -32,7 +32,7 @@ HOST MODE
    device_type,
    ranges,
    interrupt-map-mask,
-   interrupt-map : as specified in ../designware-pcie.txt
+   interrupt-map : as specified in ../snps,dw-pcie.yaml
  - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
 			       should contain the register offset within syscon
 			       and the 2nd argument should contain the bit field
diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
new file mode 100644
index 000000000000..48ed227fc5b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 SoC PCIe Host Controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: toshiba,visconti-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: PCIe configuration space region.
+      - description: Visconti specific additional registers.
+      - description: Visconti specific SMU registers
+      - description: Visconti specific memory protection unit registers (MPU)
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: ulreg
+      - const: smu
+      - const: mpu
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PCIe reference clock
+      - description: PCIe system clock
+      - description: Auxiliary clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: core
+      - const: aux
+
+  num-lanes:
+    const: 2
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - num-lanes
+  - clocks
+  - clock-names
+  - max-link-speed
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@28400000 {
+            compatible = "toshiba,visconti-pcie";
+            reg = <0x0 0x28400000 0x0 0x00400000>,
+                  <0x0 0x70000000 0x0 0x10000000>,
+                  <0x0 0x28050000 0x0 0x00010000>,
+                  <0x0 0x24200000 0x0 0x00002000>,
+                  <0x0 0x24162000 0x0 0x00001000>;
+            reg-names  = "dbi", "config", "ulreg", "smu", "mpu";
+            device_type = "pci";
+            bus-range = <0x00 0xff>;
+            num-lanes = <2>;
+            num-viewport = <8>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
+                     <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
+            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "intr";
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map =
+                <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+                 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+                 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+                 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>;
+            clock-names = "ref", "core", "aux";
+            max-link-speed = <2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
deleted file mode 100644
index 1fa2c5906d4d..000000000000
--- a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Socionext UniPhier PCIe host controller bindings
-
-This describes the devicetree bindings for PCIe host controller implemented
-on Socionext UniPhier SoCs.
-
-UniPhier PCIe host controller is based on the Synopsys DesignWare PCI core.
-It shares common functions with the PCIe DesignWare core driver and inherits
-common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt.
-
-Required properties:
-- compatible: Should be "socionext,uniphier-pcie".
-- reg: Specifies offset and length of the register set for the device.
-	According to the reg-names, appropriate register sets are required.
-- reg-names: Must include the following entries:
-    "dbi"    - controller configuration registers
-    "link"   - SoC-specific glue layer registers
-    "config" - PCIe configuration space
-- clocks: A phandle to the clock gate for PCIe glue layer including
-	the host controller.
-- resets: A phandle to the reset line for PCIe glue layer including
-	the host controller.
-- interrupts: A list of interrupt specifiers. According to the
-	interrupt-names, appropriate interrupts are required.
-- interrupt-names: Must include the following entries:
-    "dma" - DMA interrupt
-    "msi" - MSI interrupt
-
-Optional properties:
-- phys: A phandle to generic PCIe PHY. According to the phy-names, appropriate
-	phys are required.
-- phy-names: Must be "pcie-phy".
-
-Required sub-node:
-- legacy-interrupt-controller: Specifies interrupt controller for legacy PCI
-	interrupts.
-
-Required properties for legacy-interrupt-controller:
-- interrupt-controller: identifies the node as an interrupt controller.
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- interrupt-parent: Phandle to the parent interrupt controller.
-- interrupts: An interrupt specifier for legacy interrupt.
-
-Example:
-
-	pcie: pcie@66000000 {
-		compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
-		status = "disabled";
-		reg-names = "dbi", "link", "config";
-		reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
-		      <0x2fff0000 0x10000>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		clocks = <&sys_clk 24>;
-		resets = <&sys_rst 24>;
-		num-lanes = <1>;
-		num-viewport = <1>;
-		bus-range = <0x0 0xff>;
-		device_type = "pci";
-		ranges =
-		/* downstream I/O */
-			<0x81000000 0 0x00000000  0x2ffe0000  0 0x00010000
-		/* non-prefetchable memory */
-			 0x82000000 0 0x00000000  0x20000000  0 0x0ffe0000>;
-		#interrupt-cells = <1>;
-		interrupt-names = "dma", "msi";
-		interrupts = <0 224 4>, <0 225 4>;
-		interrupt-map-mask = <0 0 0  7>;
-		interrupt-map = <0 0 0  1  &pcie_intc 0>,	/* INTA */
-				<0 0 0  2  &pcie_intc 1>,	/* INTB */
-				<0 0 0  3  &pcie_intc 2>,	/* INTC */
-				<0 0 0  4  &pcie_intc 3>;	/* INTD */
-
-		pcie_intc: legacy-interrupt-controller {
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&gic>;
-			interrupts = <0 226 4>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pci/versatile.yaml b/Documentation/devicetree/bindings/pci/versatile.yaml
index 07a48c27db1f..09748ef6b94f 100644
--- a/Documentation/devicetree/bindings/pci/versatile.yaml
+++ b/Documentation/devicetree/bindings/pci/versatile.yaml
@@ -48,6 +48,8 @@ required:
   - interrupt-map
   - interrupt-map-mask
 
+unevaluatedProperties: false
+
 examples:
   - |
     pci@10001000 {
diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
index 01bf7fdf4c19..f56f8c58c5d9 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
@@ -33,6 +33,9 @@ Required properties:
 	- #address-cells: specifies the number of cells needed to encode an
 		address. The value must be 0.
 
+Optional properties:
+- dma-coherent: present if DMA operations are coherent
+- clocks: Input clock specifier. Refer to common clock bindings
 
 Example:
 ++++++++
diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
new file mode 100644
index 000000000000..24ddc2855b94
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xilinx-versal-cpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CPM Host Controller device tree for Xilinx Versal SoCs
+
+maintainers:
+  - Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,versal-cpm-host-1.00
+      - xlnx,versal-cpm5-host
+
+  reg:
+    items:
+      - description: CPM system level control and status registers.
+      - description: Configuration space region and bridge registers.
+      - description: CPM5 control and status registers.
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: cpm_slcr
+      - const: cfg
+      - const: cpm_csr
+    minItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  msi-map:
+    description:
+      Maps a Requester ID to an MSI controller and associated MSI sideband data.
+
+  ranges:
+    maxItems: 2
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      "#address-cells":
+        const: 0
+      "#interrupt-cells":
+        const: 1
+      "interrupt-controller": true
+    additionalProperties: false
+
+required:
+  - reg
+  - reg-names
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-map
+  - interrupt-map-mask
+  - bus-range
+  - msi-map
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    versal {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               cpm_pcie: pcie@fca10000 {
+                       compatible = "xlnx,versal-cpm-host-1.00";
+                       device_type = "pci";
+                       #address-cells = <3>;
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       interrupts = <0 72 4>;
+                       interrupt-parent = <&gic>;
+                       interrupt-map-mask = <0 0 0 7>;
+                       interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
+                                       <0 0 0 2 &pcie_intc_0 1>,
+                                       <0 0 0 3 &pcie_intc_0 2>,
+                                       <0 0 0 4 &pcie_intc_0 3>;
+                       bus-range = <0x00 0xff>;
+                       ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                                <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
+                       msi-map = <0x0 &its_gic 0x0 0x10000>;
+                       reg = <0x0 0xfca10000 0x0 0x1000>,
+                             <0x6 0x00000000 0x0 0x10000000>;
+                       reg-names = "cpm_slcr", "cfg";
+                       pcie_intc_0: interrupt-controller {
+                               #address-cells = <0>;
+                               #interrupt-cells = <1>;
+                               interrupt-controller;
+                       };
+               };
+
+               cpm5_pcie: pcie@fcdd0000 {
+                       compatible = "xlnx,versal-cpm5-host";
+                       device_type = "pci";
+                       #address-cells = <3>;
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       interrupts = <0 72 4>;
+                       interrupt-parent = <&gic>;
+                       interrupt-map-mask = <0 0 0 7>;
+                       interrupt-map = <0 0 0 1 &pcie_intc_1 0>,
+                                       <0 0 0 2 &pcie_intc_1 1>,
+                                       <0 0 0 3 &pcie_intc_1 2>,
+                                       <0 0 0 4 &pcie_intc_1 3>;
+                       bus-range = <0x00 0xff>;
+                       ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                                <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
+                       msi-map = <0x0 &its_gic 0x0 0x10000>;
+                       reg = <0x00 0xfcdd0000 0x00 0x1000>,
+                             <0x06 0x00000000 0x00 0x1000000>,
+                             <0x00 0xfce20000 0x00 0x1000000>;
+                       reg-names = "cpm_slcr", "cfg", "cpm_csr";
+
+                       pcie_intc_1: interrupt-controller {
+                               #address-cells = <0>;
+                               #interrupt-cells = <1>;
+                               interrupt-controller;
+                       };
+               };
+
+    };
diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.yaml b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
new file mode 100644
index 000000000000..b01e0c8b963d
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/peci/peci-aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed PECI Bus
+
+maintainers:
+  - Iwona Winiarska <iwona.winiarska@intel.com>
+  - Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+allOf:
+  - $ref: peci-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-peci
+      - aspeed,ast2500-peci
+      - aspeed,ast2600-peci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Clock source for PECI controller. Should reference the external
+      oscillator clock.
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  cmd-timeout-ms:
+    minimum: 1
+    maximum: 1000
+    default: 1000
+
+  clock-frequency:
+    description:
+      The desired operation frequency of PECI controller in Hz.
+    minimum: 2000
+    maximum: 2000000
+    default: 1000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+    peci-controller@1e78b000 {
+      compatible = "aspeed,ast2600-peci";
+      reg = <0x1e78b000 0x100>;
+      interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+      resets = <&syscon ASPEED_RESET_PECI>;
+      cmd-timeout-ms = <1000>;
+      clock-frequency = <1000000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/peci/peci-controller.yaml b/Documentation/devicetree/bindings/peci/peci-controller.yaml
new file mode 100644
index 000000000000..d7853291b060
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/peci-controller.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/peci/peci-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic for PECI
+
+maintainers:
+  - Iwona Winiarska <iwona.winiarska@intel.com>
+
+description:
+  PECI (Platform Environment Control Interface) is an interface that provides a
+  communication channel from Intel processors and chipset components to external
+  monitoring or control devices.
+
+properties:
+  $nodename:
+    pattern: "^peci-controller(@.*)?$"
+
+  cmd-timeout-ms:
+    description:
+      Command timeout in units of ms.
+
+additionalProperties: true
+
+examples:
+  - |
+    peci-controller@1e78b000 {
+      reg = <0x1e78b000 0x100>;
+      cmd-timeout-ms = <500>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/perf/arm,ccn.yaml b/Documentation/devicetree/bindings/perf/arm,ccn.yaml
new file mode 100644
index 000000000000..0b0bb2091016
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,ccn.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,ccn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM CCN (Cache Coherent Network) Performance Monitors
+
+maintainers:
+  - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,ccn-502
+      - arm,ccn-504
+      - arm,ccn-508
+      - arm,ccn-512
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    ccn@20000000 {
+        compatible = "arm,ccn-504";
+        reg = <0x20000000 0x1000000>;
+        interrupts = <0 181 4>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/perf/arm,cmn.yaml b/Documentation/devicetree/bindings/perf/arm,cmn.yaml
new file mode 100644
index 000000000000..2e51072e794a
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,cmn.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Arm Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,cmn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CMN (Coherent Mesh Network) Performance Monitors
+
+maintainers:
+  - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,cmn-600
+      - arm,cmn-650
+      - arm,cmn-700
+      - arm,ci-700
+
+  reg:
+    items:
+      - description: Physical address of the base (PERIPHBASE) and
+          size of the configuration address space.
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Overflow interrupt for DTC0
+      - description: Overflow interrupt for DTC1
+      - description: Overflow interrupt for DTC2
+      - description: Overflow interrupt for DTC3
+    description: One interrupt for each DTC domain implemented must
+      be specified, in order. DTC0 is always present.
+
+  arm,root-node:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset from PERIPHBASE of CMN-600's configuration
+      discovery node (see TRM definition of ROOTNODEBASE). Not
+      relevant for newer CMN/CI products.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: arm,cmn-600
+then:
+  required:
+    - arm,root-node
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmu@50000000 {
+        compatible = "arm,cmn-600";
+        reg = <0x50000000 0x4000000>;
+        /* 4x2 mesh with one DTC, and CFG node at 0,1,1,0 */
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+        arm,root-node = <0x104000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml
new file mode 100644
index 000000000000..c87821be158b
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2021 Arm Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,dsu-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU)
+
+maintainers:
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - Robin Murphy <robin.murphy@arm.com>
+
+description:
+  ARM DynamIQ Shared Unit (DSU) integrates one or more CPU cores with a shared
+  L3 memory system, control logic and external interfaces to form a multicore
+  cluster. The PMU enables gathering various statistics on the operation of the
+  DSU. The PMU provides independent 32-bit counters that can count any of the
+  supported events, along with a 64-bit cycle counter. The PMU is accessed via
+  CPU system registers and has no MMIO component.
+
+properties:
+  compatible:
+    oneOf:
+      - const: arm,dsu-pmu
+      - items:
+          - const: arm,dsu-110-pmu
+          - const: arm,dsu-pmu
+
+  interrupts:
+    items:
+      - description: nCLUSTERPMUIRQ interrupt
+
+  cpus:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 12
+    items:
+      maxItems: 1
+    description: List of phandles for the CPUs connected to this DSU instance.
+
+required:
+  - compatible
+  - interrupts
+  - cpus
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/perf/arm,smmu-v3-pmcg.yaml b/Documentation/devicetree/bindings/perf/arm,smmu-v3-pmcg.yaml
new file mode 100644
index 000000000000..a4b53a6a1ebf
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,smmu-v3-pmcg.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,smmu-v3-pmcg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm SMMUv3 Performance Monitor Counter Group
+
+maintainers:
+  - Will Deacon <will@kernel.org>
+  - Robin Murphy <robin.murphy@arm.com>
+
+description: |
+  An SMMUv3 may have several Performance Monitor Counter Group (PMCG).
+  They are standalone performance monitoring units that support both
+  architected and IMPLEMENTATION DEFINED event counters.
+
+properties:
+  $nodename:
+    pattern: "^pmu@[0-9a-f]*"
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,mmu-600-pmcg
+          - const: arm,smmu-v3-pmcg
+      - const: arm,smmu-v3-pmcg
+
+  reg:
+    items:
+      - description: Register page 0
+      - description: Register page 1, if SMMU_PMCG_CFGR.RELOC_CTRS = 1
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  msi-parent: true
+
+required:
+  - compatible
+  - reg
+
+anyOf:
+  - required:
+      - interrupts
+  - required:
+      - msi-parent
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmu@2b420000 {
+            compatible = "arm,smmu-v3-pmcg";
+            reg = <0x2b420000 0x1000>,
+                  <0x2b430000 0x1000>;
+            interrupts = <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>;
+            msi-parent = <&its 0xff0000>;
+    };
+
+    pmu@2b440000 {
+            compatible = "arm,smmu-v3-pmcg";
+            reg = <0x2b440000 0x1000>,
+                  <0x2b450000 0x1000>;
+            interrupts = <GIC_SPI 81 IRQ_TYPE_EDGE_RISING>;
+            msi-parent = <&its 0xff0000>;
+    };
diff --git a/Documentation/devicetree/bindings/perf/arm-ccn.txt b/Documentation/devicetree/bindings/perf/arm-ccn.txt
deleted file mode 100644
index 1c53b5aa3317..000000000000
--- a/Documentation/devicetree/bindings/perf/arm-ccn.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* ARM CCN (Cache Coherent Network)
-
-Required properties:
-
-- compatible: (standard compatible string) should be one of:
-	"arm,ccn-502"
-	"arm,ccn-504"
-	"arm,ccn-508"
-	"arm,ccn-512"
-
-- reg: (standard registers property) physical address and size
-	(16MB) of the configuration registers block
-
-- interrupts: (standard interrupt property) single interrupt
-	generated by the control block
-
-Example:
-
-	ccn@2000000000 {
-		compatible = "arm,ccn-504";
-		reg = <0x20 0x00000000 0 0x1000000>;
-		interrupts = <0 181 4>;
-	};
diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt
deleted file mode 100644
index 7822a806ea0a..000000000000
--- a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Freescale(NXP) IMX8 DDR performance monitor
-
-Required properties:
-
-- compatible: should be one of:
-	"fsl,imx8-ddr-pmu"
-	"fsl,imx8m-ddr-pmu"
-	"fsl,imx8mp-ddr-pmu"
-
-- reg: physical address and size
-
-- interrupts: single interrupt
-	generated by the control block
-
-Example:
-
-	ddr-pmu@5c020000 {
-		compatible = "fsl,imx8-ddr-pmu";
-		reg = <0x5c020000 0x10000>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
new file mode 100644
index 000000000000..80a92385367e
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/fsl-imx-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale(NXP) IMX8 DDR performance monitor
+
+maintainers:
+  - Frank Li <frank.li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8-ddr-pmu
+          - fsl,imx8m-ddr-pmu
+          - fsl,imx8mq-ddr-pmu
+          - fsl,imx8mm-ddr-pmu
+          - fsl,imx8mn-ddr-pmu
+          - fsl,imx8mp-ddr-pmu
+      - items:
+          - enum:
+              - fsl,imx8mm-ddr-pmu
+              - fsl,imx8mn-ddr-pmu
+              - fsl,imx8mq-ddr-pmu
+              - fsl,imx8mp-ddr-pmu
+          - const: fsl,imx8m-ddr-pmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ddr-pmu@5c020000 {
+        compatible = "fsl,imx8-ddr-pmu";
+        reg = <0x5c020000 0x10000>;
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/perf/marvell-cn10k-ddr.yaml b/Documentation/devicetree/bindings/perf/marvell-cn10k-ddr.yaml
new file mode 100644
index 000000000000..a18dd0a8c43a
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/marvell-cn10k-ddr.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/marvell-cn10k-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN10K DDR performance monitor
+
+maintainers:
+  - Bharat Bhushan <bbhushan2@marvell.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - marvell,cn10k-ddr-pmu
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pmu@87e1c0000000 {
+            compatible = "marvell,cn10k-ddr-pmu";
+            reg = <0x87e1 0xc0000000 0x0 0x10000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml b/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
new file mode 100644
index 000000000000..362142252667
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/marvell-cn10k-tad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN10K LLC-TAD performance monitor
+
+maintainers:
+  - Bhaskara Budiredla <bbudiredla@marvell.com>
+
+description: |
+  The Tag-and-Data units (TADs) maintain coherence and contain CN10K
+  shared on-chip last level cache (LLC). The tad pmu measures the
+  performance of last-level cache. Each tad pmu supports up to eight
+  counters.
+
+  The DT setup comprises of number of tad blocks, the sizes of pmu
+  regions, tad blocks and overall base address of the HW.
+
+properties:
+  compatible:
+    const: marvell,cn10k-tad-pmu
+
+  reg:
+    maxItems: 1
+
+  marvell,tad-cnt:
+    description: specifies the number of tads on the soc
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  marvell,tad-page-size:
+    description: specifies the size of each tad page
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  marvell,tad-pmu-page-size:
+    description: specifies the size of page that the pmu uses
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - marvell,tad-cnt
+  - marvell,tad-page-size
+  - marvell,tad-pmu-page-size
+
+additionalProperties: false
+
+examples:
+  - |
+
+    tad {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        tad_pmu@80000000 {
+            compatible = "marvell,cn10k-tad-pmu";
+            reg = <0x87e2 0x80000000 0x0 0x1000>;
+            marvell,tad-cnt = <1>;
+            marvell,tad-page-size = <0x1000>;
+            marvell,tad-pmu-page-size = <0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt b/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt
deleted file mode 100644
index 1bd15785b4ae..000000000000
--- a/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* NDS32 Performance Monitor Units
-
-NDS32 core have a PMU for counting cpu and cache events like cache misses.
-The NDS32 PMU representation in the device tree should be done as under:
-
-Required properties:
-
-- compatible :
-	"andestech,nds32v3-pmu"
-
-- interrupts : The interrupt number for NDS32 PMU is 13.
-
-Example:
-pmu{
-	compatible = "andestech,nds32v3-pmu";
-	interrupts = <13>;
-}
diff --git a/Documentation/devicetree/bindings/perf/spe-pmu.yaml b/Documentation/devicetree/bindings/perf/spe-pmu.yaml
new file mode 100644
index 000000000000..7d74152f437e
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/spe-pmu.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/spe-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU)
+
+maintainers:
+  - Will Deacon <will@kernel.org>
+
+description:
+  ARMv8.2 introduces the optional Statistical Profiling Extension for collecting
+  performance sample data using an in-memory trace buffer.
+
+properties:
+  compatible:
+    const: arm,statistical-profiling-extension-v1
+
+  interrupts:
+    maxItems: 1
+    description: |
+      The PPI to signal SPE events. For heterogeneous systems where SPE is only
+      supported on a subset of the CPUs, please consult the arm,gic-v3 binding
+      for details on describing a PPI partition.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spe-pmu {
+        compatible = "arm,statistical-profiling-extension-v1";
+        interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
index 94ac23687b7e..4fff091bd534 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 USB PHY Device Tree Bindings
+title: Allwinner A10 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -51,9 +51,11 @@ properties:
       - const: usb2_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
index fd6e126fcf18..f557feca9763 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun50i-a64-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A64 USB PHY Device Tree Bindings
+title: Allwinner A64 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -15,7 +15,9 @@ properties:
     const: 1
 
   compatible:
-    const: allwinner,sun50i-a64-usb-phy
+    enum:
+      - allwinner,sun20i-d1-usb-phy
+      - allwinner,sun50i-a64-usb-phy
 
   reg:
     items:
@@ -50,9 +52,11 @@ properties:
       - const: usb1_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
index 7670411002c9..4480fdedd669 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H6 USB PHY Device Tree Bindings
+title: Allwinner H6 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -50,9 +50,11 @@ properties:
       - const: usb3_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
index e5922b427342..c03b83103e87 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
@@ -34,6 +34,8 @@ required:
   - resets
   - "#phy-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/sun50i-h6-ccu.h>
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
index 9b319381d1ad..1563e3df3052 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun5i-a13-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A13 USB PHY Device Tree Bindings
+title: Allwinner A13 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -45,9 +45,11 @@ properties:
       - const: usb1_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
index d0b541a461f3..dfb6a8993535 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-mipi-dphy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 MIPI D-PHY Controller Device Tree Bindings
+title: Allwinner A31 MIPI D-PHY Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -37,6 +37,18 @@ properties:
   resets:
     maxItems: 1
 
+  allwinner,direction:
+    $ref: '/schemas/types.yaml#/definitions/string'
+    description: |
+      Direction of the D-PHY:
+      - "rx" for receiving (e.g. when used with MIPI CSI-2);
+      - "tx" for transmitting (e.g. when used with MIPI DSI).
+
+    enum:
+      - tx
+      - rx
+    default: tx
+
 required:
   - "#phy-cells"
   - compatible
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
index b0ed01bbf3db..4897a3d2fbc3 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 USB PHY Device Tree Bindings
+title: Allwinner A31 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -54,9 +54,11 @@ properties:
       - const: usb2_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
index b0674406f8aa..99de9c6889a0 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-a23-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A23 USB PHY Device Tree Bindings
+title: Allwinner A23 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -50,9 +50,11 @@ properties:
       - const: usb1_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
index 48dc9c834a9b..73438d84de50 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-a83t-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t USB PHY Device Tree Bindings
+title: Allwinner A83t USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -56,9 +56,11 @@ properties:
       - const: usb2_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
index 60c344585276..77539b4601c2 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-h3-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H3 USB PHY Device Tree Bindings
+title: Allwinner H3 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -15,7 +15,9 @@ properties:
     const: 1
 
   compatible:
-    const: allwinner,sun8i-h3-usb-phy
+    enum:
+      - allwinner,sun8i-h3-usb-phy
+      - allwinner,sun50i-h616-usb-phy
 
   reg:
     items:
@@ -62,9 +64,11 @@ properties:
       - const: usb3_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
index a2bb36790fbd..2dd31630c13e 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-r40-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner R40 USB PHY Device Tree Bindings
+title: Allwinner R40 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -56,9 +56,11 @@ properties:
       - const: usb2_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
index eadfd0c9493c..395d33855d48 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-v3s-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner V3s USB PHY Device Tree Bindings
+title: Allwinner V3s USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -42,9 +42,11 @@ properties:
     const: usb0_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
index ded7d6f0a119..bd9445f6f130 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun9i-a80-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 USB PHY Device Tree Bindings
+title: Allwinner A80 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -22,7 +22,8 @@ properties:
 
   clocks:
     anyOf:
-      - description: Main PHY Clock
+      - maxItems: 1
+        description: Main PHY Clock
 
       - items:
           - description: Main PHY clock
@@ -39,20 +40,16 @@ properties:
           - const: hsic_480M
 
   resets:
-    anyOf:
+    minItems: 1
+    items:
       - description: Normal USB PHY reset
-
-      - items:
-          - description: Normal USB PHY reset
-          - description: HSIC Reset
+      - description: HSIC Reset
 
   reset-names:
-    oneOf:
+    minItems: 1
+    items:
       - const: phy
-
-      - items:
-          - const: phy
-          - const: hsic
+      - const: hsic
 
   phy_type:
     const: hsic
diff --git a/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
new file mode 100644
index 000000000000..5eddaed3d853
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,axg-mipi-dphy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic AXG MIPI D-PHY
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,axg-mipi-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: phy
+
+  "#phy-cells":
+    const: 0
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: analog
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@ff640000 {
+            compatible = "amlogic,axg-mipi-dphy";
+            reg = <0xff640000 0x100>;
+            clocks = <&clk_mipi_dsi_phy>;
+            clock-names = "pclk";
+            resets = <&reset_phy>;
+            reset-names = "phy";
+            phys = <&mipi_pcie_analog_dphy>;
+            phy-names = "analog";
+            #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
new file mode 100644
index 000000000000..7aa0c05d6ce4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic G12A MIPI analog PHY
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+
+properties:
+  compatible:
+    const: amlogic,g12a-mipi-dphy-analog
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@0 {
+          compatible = "amlogic,g12a-mipi-dphy-analog";
+          reg = <0x0 0xc>;
+          #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
new file mode 100644
index 000000000000..a90fa1baadab
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic AXG shared MIPI/PCIE analog PHY
+
+maintainers:
+  - Remi Pommarel <repk@triplefau.lt>
+
+description: |+
+  The Everything-Else Power Domains node should be the child of a syscon
+  node with the required property:
+
+  - compatible: Should be the following:
+                "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
+
+  Refer to the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+  compatible:
+    const: amlogic,axg-mipi-pcie-analog-phy
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mpphy: phy {
+          compatible = "amlogic,axg-mipi-pcie-analog-phy";
+          #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml
new file mode 100644
index 000000000000..45f3d72b1cca
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,meson-axg-pcie.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic AXG PCIE PHY
+
+maintainers:
+  - Remi Pommarel <repk@triplefau.lt>
+
+properties:
+  compatible:
+    const: amlogic,axg-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: analog
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - phys
+  - phy-names
+  - resets
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+    #include <dt-bindings/phy/phy.h>
+    pcie_phy: pcie-phy@ff644000 {
+          compatible = "amlogic,axg-pcie-phy";
+          reg = <0xff644000 0x1c>;
+          resets = <&reset RESET_PCIE_PHY>;
+          phys = <&mipi_analog_phy PHY_TYPE_PCIE>;
+          phy-names = "analog";
+          #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
index 57d8603076bd..f3a5fbabbbb5 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
@@ -8,12 +8,13 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic G12A USB2 PHY
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 properties:
   compatible:
     enum:
       - amlogic,meson-g12a-usb2-phy
+      - amlogic,meson-a1-usb2-phy
 
   reg:
     maxItems: 1
@@ -36,9 +37,9 @@ properties:
     const: 0
 
   phy-supply:
-     description:
-       Phandle to a regulator that provides power to the PHY. This
-       regulator will be managed during the PHY power on/off sequence.
+    description:
+      Phandle to a regulator that provides power to the PHY. This
+      regulator will be managed during the PHY power on/off sequence.
 
 required:
   - compatible
@@ -49,6 +50,21 @@ required:
   - reset-names
   - "#phy-cells"
 
+if:
+  properties:
+    compatible:
+      enum:
+        - amlogic,meson-a1-usb-ctrl
+
+then:
+  properties:
+    power-domains:
+      maxItems: 1
+  required:
+    - power-domains
+
+additionalProperties: false
+
 examples:
   - |
     phy@36000 {
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
index 346f9c35427c..868b4e6fde71 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic G12A USB3 + PCIE Combo PHY
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 properties:
   compatible:
@@ -44,6 +44,8 @@ required:
   - reset-names
   - "#phy-cells"
 
+additionalProperties: false
+
 examples:
   - |
     phy@46000 {
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml
new file mode 100644
index 000000000000..1f085cdd1c85
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,meson8-hdmi-tx-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson8, Meson8b and Meson8m2 HDMI TX PHY
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |+
+  The HDMI TX PHY node should be the child of a syscon node with the
+  required property:
+
+  compatible = "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
+
+  Refer to the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+  $nodename:
+    pattern: "^hdmi-phy@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson8b-hdmi-tx-phy
+              - amlogic,meson8m2-hdmi-tx-phy
+          - const: amlogic,meson8-hdmi-tx-phy
+      - const: amlogic,meson8-hdmi-tx-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    description:
+      HDMI TMDS clock
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi-phy@3a0 {
+      compatible = "amlogic,meson8-hdmi-tx-phy";
+      reg = <0x3a0 0xc>;
+      clocks = <&tmds_clock>;
+      #phy-cells = <0>;
+    };
+  - |
+    hdmi-phy@3a0 {
+      compatible = "amlogic,meson8b-hdmi-tx-phy", "amlogic,meson8-hdmi-tx-phy";
+      reg = <0x3a0 0xc>;
+      clocks = <&tmds_clock>;
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml
new file mode 100644
index 000000000000..03c4809dbe8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,meson8b-usb2-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson8-usb2-phy
+              - amlogic,meson8b-usb2-phy
+              - amlogic,meson8m2-usb2-phy
+          - const: amlogic,meson-mx-usb2-phy
+      - const: amlogic,meson-gxbb-usb2-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: usb_general
+      - const: usb
+
+  resets:
+    minItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  phy-supply:
+    description:
+      Phandle to a regulator that provides power to the PHY. This
+      regulator will be managed during the PHY power on/off sequence.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@c0000000 {
+      compatible = "amlogic,meson-gxbb-usb2-phy";
+      reg = <0xc0000000 0x20>;
+      resets = <&reset_usb_phy>;
+      clocks = <&clk_usb_general>, <&reset_usb>;
+      clock-names = "usb_general", "usb";
+      phy-supply = <&usb_vbus>;
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
deleted file mode 100644
index a7aee9ea8926..000000000000
--- a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Driver for Broadcom Northstar USB 2.0 PHY
-
-Required properties:
-- compatible: brcm,ns-usb2-phy
-- reg: iomem address range of DMU (Device Management Unit)
-- reg-names: "dmu", the only needed & supported reg right now
-- clocks: USB PHY reference clock
-- clock-names: "phy-ref-clk", the only needed & supported clock right now
-
-To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it
-requires passing phandle to the USB PHY reference clock.
-
-Example:
-	usb2-phy {
-		compatible = "brcm,ns-usb2-phy";
-		reg = <0x1800c000 0x1000>;
-		reg-names = "dmu";
-		#phy-cells = <0>;
-		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-		clock-names = "phy-ref-clk";
-	};
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
new file mode 100644
index 000000000000..426101530a21
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/bcm-ns-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar USB 2.0 PHY
+
+description: >
+  To initialize USB 2.0 PHY driver needs to setup PLL correctly.
+  To do this it requires passing phandle to the USB PHY reference clock.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: brcm,ns-usb2-phy
+
+  reg:
+    anyOf:
+      - maxItems: 1
+        description: PHY control register
+      - maxItems: 1
+        description: iomem address range of DMU (Device Management Unit)
+        deprecated: true
+
+  reg-names:
+    items:
+      - const: dmu
+
+  brcm,syscon-clkset:
+    description: phandle to syscon for clkset register
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  clocks:
+    items:
+      - description: USB PHY reference clock
+
+  clock-names:
+    items:
+      - const: phy-ref-clk
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+
+oneOf:
+  - required:
+      - brcm,syscon-clkset
+  - required:
+      - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm-nsp.h>
+    phy@1800c164 {
+        compatible = "brcm,ns-usb2-phy";
+        reg = <0x1800c164 0x4>;
+        brcm,syscon-clkset = <&clkset>;
+        clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+        clock-names = "phy-ref-clk";
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
deleted file mode 100644
index 32f057260351..000000000000
--- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Driver for Broadcom Northstar USB 3.0 PHY
-
-Required properties:
-
-- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
-- reg: address of MDIO bus device
-- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin)
-		   registers
-- #phy-cells: must be 0
-
-Initialization of USB 3.0 PHY depends on Northstar version. There are currently
-three known series: Ax, Bx and Cx.
-Known A0: BCM4707 rev 0
-Known B0: BCM4707 rev 4, BCM53573 rev 2
-Known B1: BCM4707 rev 6
-Known C0: BCM47094 rev 0
-
-Example:
-	mdio: mdio@0 {
-		reg = <0x0>;
-		#size-cells = <1>;
-		#address-cells = <0>;
-
-		usb3-phy@10 {
-			compatible = "brcm,ns-ax-usb3-phy";
-			reg = <0x10>;
-			usb3-dmp-syscon = <&usb3_dmp>;
-			#phy-cells = <0>;
-		};
-	};
-
-	usb3_dmp: syscon@18105000 {
-		reg = <0x18105000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
new file mode 100644
index 000000000000..7fd419db45d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/bcm-ns-usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar USB 3.0 PHY
+
+description: |
+  Initialization of USB 3.0 PHY depends on Northstar version. There are currently
+  three known series: Ax, Bx and Cx.
+  Known A0: BCM4707 rev 0
+  Known B0: BCM4707 rev 4, BCM53573 rev 2
+  Known B1: BCM4707 rev 6
+  Known C0: BCM47094 rev 0
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,ns-ax-usb3-phy
+      - brcm,ns-bx-usb3-phy
+
+  reg:
+    description: address of MDIO bus device
+    maxItems: 1
+
+  usb3-dmp-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the DMP (Device Management Plugin) syscon
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - usb3-dmp-syscon
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb3-phy@10 {
+            compatible = "brcm,ns-ax-usb3-phy";
+            reg = <0x10>;
+            usb3-dmp-syscon = <&usb3_dmp>;
+            #phy-cells = <0>;
+        };
+    };
+
+    usb3_dmp: syscon@18105000 {
+        reg = <0x18105000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml
new file mode 100644
index 000000000000..0f0bcde9eb88
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/brcm,bcm63xx-usbh-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: BCM63xx USBH PHY
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6318-usbh-phy
+      - brcm,bcm6328-usbh-phy
+      - brcm,bcm6358-usbh-phy
+      - brcm,bcm6362-usbh-phy
+      - brcm,bcm6368-usbh-phy
+      - brcm,bcm63268-usbh-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: usbh
+      - const: usb_ref
+
+  resets:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - "#phy-cells"
+
+if:
+  properties:
+    compatible:
+      enum:
+        - brcm,bcm6318-usbh-phy
+        - brcm,bcm6328-usbh-phy
+        - brcm,bcm6362-usbh-phy
+        - brcm,bcm63268-usbh-phy
+then:
+  properties:
+    power-domains:
+      maxItems: 1
+  required:
+    - power-domains
+else:
+  properties:
+    power-domains: false
+
+examples:
+  - |
+    usbh: usb-phy@10001700 {
+      compatible = "brcm,bcm6368-usbh-phy";
+      reg = <0x10001700 0x38>;
+      clocks = <&periph_clk 15>;
+      clock-names = "usbh";
+      resets = <&periph_rst 12>;
+      #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
deleted file mode 100644
index 698aacbdcfc4..000000000000
--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-Broadcom STB USB PHY
-
-Required properties:
-- compatible: should be one of
-	"brcm,brcmstb-usb-phy"
-	"brcm,bcm7216-usb-phy"
-	"brcm,bcm7211-usb-phy"
-
-- reg and reg-names properties requirements are specific to the
-  compatible string.
-  "brcm,brcmstb-usb-phy":
-    - reg: 1 or 2 offset and length pairs. One for the base CTRL registers
-           and an optional pair for systems with USB 3.x support
-    - reg-names: not specified
-  "brcm,bcm7216-usb-phy":
-    - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL
-           registers
-    - reg-names: "ctrl", "xhci_ec", "xhci_gbl"
-  "brcm,bcm7211-usb-phy":
-    - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL,
-           USB_PHY and USB_MDIO registers and an optional pair
-	   for the BDC registers
-    - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
-
-- #phy-cells: Shall be 1 as it expects one argument for setting
-	      the type of the PHY. Possible values are:
-	      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
-	      - PHY_TYPE_USB3 for USB3.x PHY
-
-Optional Properties:
-- clocks : clock phandles.
-- clock-names: String, clock name.
-- interrupts: wakeup interrupt
-- interrupt-names: "wakeup"
-- brcm,ipp: Boolean, Invert Port Power.
-  Possible values are: 0 (Don't invert), 1 (Invert)
-- brcm,ioc: Boolean, Invert Over Current detection.
-  Possible values are: 0 (Don't invert), 1 (Invert)
-- dr_mode: String, PHY Device mode.
-  Possible values are: "host", "peripheral ", "drd" or "typec-pd"
-  If this property is not defined, the phy will default to "host" mode.
-- brcm,syscon-piarbctl: phandle to syscon for handling config registers
-NOTE: one or both of the following two properties must be set
-- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
-- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
-
-
-Example:
-
-usbphy_0: usb-phy@f0470200 {
-	reg = <0xf0470200 0xb8>,
-		<0xf0471940 0x6c0>;
-	compatible = "brcm,brcmstb-usb-phy";
-	#phy-cells = <1>;
-	dr_mode = "host"
-	brcm,ioc = <1>;
-	brcm,ipp = <1>;
-	brcm,has-xhci;
-	brcm,has-eohci;
-	clocks = <&usb20>, <&usb30>;
-	clock-names = "sw_usb", "sw_usb3";
-};
-
-usb-phy@29f0200 {
-	reg = <0x29f0200 0x200>,
-		<0x29c0880 0x30>,
-		<0x29cc100 0x534>,
-		<0x2808000 0x24>,
-		<0x2980080 0x8>;
-	reg-names = "ctrl",
-		"xhci_ec",
-		"xhci_gbl",
-		"usb_phy",
-		"usb_mdio";
-	brcm,ioc = <0x0>;
-	brcm,ipp = <0x0>;
-	compatible = "brcm,bcm7211-usb-phy";
-	interrupts = <0x30>;
-	interrupt-parent = <&vpu_intr1_nosec_intc>;
-	interrupt-names = "wake";
-	#phy-cells = <0x1>;
-	brcm,has-xhci;
-	syscon-piarbctl = <&syscon_piarbctl>;
-	clocks = <&scmi_clk 256>;
-	clock-names = "sw_usb";
-};
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
new file mode 100644
index 000000000000..43a4b880534c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,brcmstb-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB USB PHY
+
+description: Broadcom's PHY that handles EHCI/OHCI and/or XHCI
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4908-usb-phy
+      - brcm,bcm7211-usb-phy
+      - brcm,bcm7216-usb-phy
+      - brcm,brcmstb-usb-phy
+
+  reg:
+    minItems: 1
+    items:
+      - description: the base CTRL register
+      - description: XHCI EC register
+      - description: XHCI GBL register
+      - description: USB PHY register
+      - description: USB MDIO register
+      - description: BDC register
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: ctrl
+      - const: xhci_ec
+      - const: xhci_gbl
+      - const: usb_phy
+      - const: usb_mdio
+      - const: bdc_ec
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sw_usb
+      - const: sw_usb3
+
+  interrupts:
+    description: wakeup interrupt
+
+  interrupt-names:
+    const: wake
+
+  brcm,ipp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Invert Port Power
+    minimum: 0
+    maximum: 1
+
+  brcm,ioc:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Invert Over Current detection
+    minimum: 0
+    maximum: 1
+
+  dr_mode:
+    description: PHY Device mode. If this property is not defined, the PHY will
+      default to "host" mode.
+    enum:
+      - host
+      - peripheral
+      - drd
+      - typec-pd
+
+  brcm,syscon-piarbctl:
+    description: phandle to syscon for handling config registers
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  brcm,has-xhci:
+    description: Indicates the PHY has an XHCI PHY.
+    type: boolean
+
+  brcm,has-eohci:
+    description: Indicates the PHY has an EHCI/OHCI PHY.
+    type: boolean
+
+  "#phy-cells":
+    description: |
+      Cell allows setting the type of the PHY. Possible values are:
+      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
+      - PHY_TYPE_USB3 for USB3.x PHY
+    const: 1
+
+required:
+  - reg
+  - "#phy-cells"
+
+anyOf:
+  - required:
+      - brcm,has-xhci
+  - required:
+      - brcm,has-eohci
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - const: brcm,bcm4908-usb-phy
+              - const: brcm,brcmstb-usb-phy
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7211-usb-phy
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 6
+        reg-names:
+          minItems: 5
+          maxItems: 6
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7216-usb-phy
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+        reg-names:
+          minItems: 3
+          maxItems: 3
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    usb-phy@f0470200 {
+        compatible = "brcm,brcmstb-usb-phy";
+        reg = <0xf0470200 0xb8>,
+              <0xf0471940 0x6c0>;
+        #phy-cells = <1>;
+        dr_mode = "host";
+        brcm,ioc = <1>;
+        brcm,ipp = <1>;
+        brcm,has-xhci;
+        brcm,has-eohci;
+        clocks = <&usb20>, <&usb30>;
+        clock-names = "sw_usb", "sw_usb3";
+    };
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    usb-phy@29f0200 {
+        compatible = "brcm,bcm7211-usb-phy";
+        reg = <0x29f0200 0x200>,
+              <0x29c0880 0x30>,
+              <0x29cc100 0x534>,
+              <0x2808000 0x24>,
+              <0x2980080 0x8>;
+        reg-names = "ctrl",
+            "xhci_ec",
+            "xhci_gbl",
+            "usb_phy",
+            "usb_mdio";
+        brcm,ioc = <0x0>;
+        brcm,ipp = <0x0>;
+        interrupts = <0x30>;
+        interrupt-parent = <&vpu_intr1_nosec_intc>;
+        interrupt-names = "wake";
+        #phy-cells = <0x1>;
+        brcm,has-xhci;
+        brcm,syscon-piarbctl = <&syscon_piarbctl>;
+        clocks = <&scmi_clk 256>;
+        clock-names = "sw_usb";
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
deleted file mode 100644
index 10efff28b52b..000000000000
--- a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Broadcom Cygnus PCIe PHY
-
-Required properties:
-- compatible: must be "brcm,cygnus-pcie-phy"
-- reg: base address and length of the PCIe PHY block
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Each PCIe PHY should be represented by a child node
-
-Required properties For the child node:
-- reg: the PHY ID
-0 - PCIe RC 0
-1 - PCIe RC 1
-- #phy-cells: must be 0
-
-Example:
-	pcie_phy: phy@301d0a0 {
-		compatible = "brcm,cygnus-pcie-phy";
-		reg = <0x0301d0a0 0x14>;
-
-		pcie0_phy: phy@0 {
-			reg = <0>;
-			#phy-cells = <0>;
-		};
-
-		pcie1_phy: phy@1 {
-			reg = <1>;
-			#phy-cells = <0>;
-		};
-	};
-
-	/* users of the PCIe phy */
-
-	pcie0: pcie@18012000 {
-		...
-		...
-		phys = <&pcie0_phy>;
-		phy-names = "pcie-phy";
-	};
-
-	pcie1: pcie@18013000 {
-		...
-		...
-		phys = <pcie1_phy>;
-		phy-names = "pcie-phy";
-	};
diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml
new file mode 100644
index 000000000000..808e90b2465d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,cygnus-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Cygnus PCIe PHY
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+properties:
+  $nodename:
+    pattern: "^pcie[-|_]phy(@.*)?$"
+
+  compatible:
+    items:
+      - const: brcm,cygnus-pcie-phy
+
+  reg:
+    maxItems: 1
+    description: >
+      Base address and length of the PCIe PHY block
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^pcie-phy@[0-9]+$":
+    type: object
+    additionalProperties: false
+    description: >
+      PCIe PHY child nodes
+
+    properties:
+      reg:
+        maxItems: 1
+        description: >
+          The PCIe PHY port number
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - "#phy-cells"
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie_phy: pcie_phy@301d0a0 {
+      compatible = "brcm,cygnus-pcie-phy";
+      reg = <0x0301d0a0 0x14>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pcie0_phy: pcie-phy@0 {
+          reg = <0>;
+          #phy-cells = <0>;
+      };
+
+      pcie1_phy: pcie-phy@1 {
+          reg = <1>;
+          #phy-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt b/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt
deleted file mode 100644
index 5b51007c6f24..000000000000
--- a/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Broadcom NS2 PCIe PHY binding document
-
-Required bus properties:
-- reg: MDIO Bus number for the MDIO interface
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Required PHY properties:
-- compatible: should be "brcm,ns2-pcie-phy"
-- reg: MDIO Phy ID for the MDIO interface
-- #phy-cells: must be 0
-
-This is a child bus node of "brcm,mdio-mux-iproc" node.
-
-Example:
-
-mdio@0 {
-	reg = <0x0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	pci_phy0: pci-phy@0 {
-		compatible = "brcm,ns2-pcie-phy";
-		reg = <0x0>;
-		#phy-cells = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml
new file mode 100644
index 000000000000..70eb48b391c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,ns2-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom NS2 PCIe PHY binding document
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+properties:
+  compatible:
+    const: brcm,ns2-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mdio {
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       pci-phy@0 {
+          compatible = "brcm,ns2-pcie-phy";
+          reg = <0x0>;
+          #phy-cells = <0>;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml
new file mode 100644
index 000000000000..435b971dfd9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/brcm,sata-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Broadcom SATA3 PHY
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "^sata[-|_]phy(@.*)?$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-sata-phy
+              - brcm,bcm7425-sata-phy
+              - brcm,bcm7445-sata-phy
+              - brcm,bcm63138-sata-phy
+          - const: brcm,phy-sata3
+      - items:
+          - const: brcm,iproc-nsp-sata-phy
+      - items:
+          - const: brcm,iproc-ns2-sata-phy
+      - items:
+          - const: brcm,iproc-sr-sata-phy
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: phy
+      - const: phy-ctrl
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^sata-phy@[0-9]+$":
+    type: object
+    description: |
+      Each port's PHY should be represented as a sub-node.
+
+    properties:
+      reg:
+        description: The SATA PHY port number
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+      "brcm,enable-ssc":
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: |
+          Use spread spectrum clocking (SSC) on this port
+          This property is not applicable for "brcm,iproc-ns2-sata-phy",
+          "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
+
+      "brcm,rxaeq-mode":
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          String that indicates the desired RX equalizer mode.
+        enum:
+          - off
+          - auto
+          - manual
+
+      "brcm,rxaeq-value":
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            When 'brcm,rxaeq-mode' is set to "manual", provides the RX
+            equalizer value that should be used.
+        minimum: 0
+        maximum: 63
+
+      "brcm,tx-amplitude-millivolt":
+        description: |
+            Transmit amplitude voltage in millivolt.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [400, 500, 600, 800]
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      const: brcm,iproc-ns2-sata-phy
+then:
+  properties:
+    reg:
+      minItems: 2
+
+    reg-names:
+      minItems: 2
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+    reg-names:
+      maxItems: 1
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    sata_phy@f0458100 {
+        compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+        reg = <0xf0458100 0x1e00>;
+        reg-names = "phy";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sata-phy@0 {
+                reg = <0>;
+                #phy-cells = <0>;
+        };
+
+        sata-phy@1 {
+                reg = <1>;
+                #phy-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
deleted file mode 100644
index c03ad2198410..000000000000
--- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Broadcom SATA3 PHY
-
-Required properties:
-- compatible: should be one or more of
-     "brcm,bcm7216-sata-phy"
-     "brcm,bcm7425-sata-phy"
-     "brcm,bcm7445-sata-phy"
-     "brcm,iproc-ns2-sata-phy"
-     "brcm,iproc-nsp-sata-phy"
-     "brcm,phy-sata3"
-     "brcm,iproc-sr-sata-phy"
-     "brcm,bcm63138-sata-phy"
-- address-cells: should be 1
-- size-cells: should be 0
-- reg: register ranges for the PHY PCB interface
-- reg-names: should be "phy" and "phy-ctrl"
-     The "phy-ctrl" registers are only required for
-     "brcm,iproc-ns2-sata-phy" and "brcm,iproc-sr-sata-phy".
-
-Sub-nodes:
-  Each port's PHY should be represented as a sub-node.
-
-Sub-nodes required properties:
-- reg: the PHY number
-- phy-cells: generic PHY binding; must be 0
-
-Sub-nodes optional properties:
-- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
-     This property is not applicable for "brcm,iproc-ns2-sata-phy",
-     "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
-
-- brcm,rxaeq-mode: string that indicates the desired RX equalizer
-  mode, possible values are:
-	"off" (equivalent to not specifying the property)
-	"auto"
-	"manual" (brcm,rxaeq-value is used in that case)
-
-- brcm,rxaeq-value: when 'rxaeq-mode' is set to "manual", provides the RX
-  equalizer value that should be used. Allowed range is 0..63.
-
-Example
-	sata-phy@f0458100 {
-		compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
-		reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
-		reg-names = "phy";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata-phy@0 {
-			reg = <0>;
-			#phy-cells = <0>;
-		};
-
-		sata-phy@1 {
-			reg = <1>;
-			#phy-cells = <0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt b/Documentation/devicetree/bindings/phy/calxeda-combophy.txt
deleted file mode 100644
index 6622bdb2e8bc..000000000000
--- a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Calxeda Highbank Combination Phys for SATA
-
-Properties:
-- compatible : Should be "calxeda,hb-combophy"
-- #phy-cells: Should be 1.
-- reg : Address and size for Combination Phy registers.
-- phydev: device ID for programming the combophy.
-
-Example:
-
-	combophy5: combo-phy@fff5d000 {
-		compatible = "calxeda,hb-combophy";
-		#phy-cells = <1>;
-		reg = <0xfff5d000 0x1000>;
-		phydev = <31>;
-	};
-
diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml
new file mode 100644
index 000000000000..41ee16e21f8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/calxeda-combophy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank Combination PHYs binding for SATA
+
+description: |
+  The Calxeda Combination PHYs connect the SoC to the internal fabric
+  and to SATA connectors. The PHYs support multiple protocols (SATA,
+  SGMII, PCIe) and can be assigned to different devices (SATA or XGMAC
+  controller).
+  Programming the PHYs is typically handled by those device drivers,
+  not by a dedicated PHY driver.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: calxeda,hb-combophy
+
+  '#phy-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  phydev:
+    description: device ID for programming the ComboPHY.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 31
+
+required:
+  - compatible
+  - reg
+  - phydev
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    combophy5: combo-phy@fff5d000 {
+                   compatible = "calxeda,hb-combophy";
+                   #phy-cells = <1>;
+                   reg = <0xfff5d000 0x1000>;
+                   phydev = <31>;
+               };
diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml
new file mode 100644
index 000000000000..6fdd46ad5a78
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/cdns,dphy-rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence DPHY Rx
+
+maintainers:
+  - Pratyush Yadav <pratyush@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - const: cdns,dphy-rx
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    dphy0: phy@4580000 {
+        compatible = "cdns,dphy-rx";
+        reg = <0x4580000 0x1100>;
+        #phy-cells = <0>;
+        power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt
deleted file mode 100644
index 1095bc4e72d9..000000000000
--- a/Documentation/devicetree/bindings/phy/cdns,dphy.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Cadence DPHY
-============
-
-Cadence DPHY block.
-
-Required properties:
-- compatible: should be set to "cdns,dphy".
-- reg: physical base address and length of the DPHY registers.
-- clocks: DPHY reference clocks.
-- clock-names: must contain "psm" and "pll_ref".
-- #phy-cells: must be set to 0.
-
-Example:
-	dphy0: dphy@fd0e0000{
-		compatible = "cdns,dphy";
-		reg = <0x0 0xfd0e0000 0x0 0x1000>;
-		clocks = <&psm_clk>, <&pll_ref_clk>;
-		clock-names = "psm", "pll_ref";
-		#phy-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
new file mode 100644
index 000000000000..6cd9b0f388a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/cdns,dphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence DPHY
+
+maintainers:
+  - Pratyush Yadav <pratyush@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - cdns,dphy
+      - ti,j721e-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PMA state machine clock
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: psm
+      - const: pll_ref
+
+  "#phy-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    dphy0: phy@fd0e0000{
+        compatible = "cdns,dphy";
+        reg = <0xfd0e0000 0x1000>;
+        clocks = <&psm_clk>, <&pll_ref_clk>;
+        clock-names = "psm", "pll_ref";
+        power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
new file mode 100644
index 000000000000..3a07285b5470
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2020 NXP
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/cdns,salvo-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence SALVO PHY
+
+maintainers:
+  - Peter Chen <peter.chen@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,salvo-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: salvo_phy_clk
+
+  power-domains:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    usb3phy: usb3-phy@5b160000 {
+        compatible = "nxp,salvo-phy";
+        reg = <0x5b160000 0x40000>;
+        clocks = <&usb3_lpcg 4>;
+        clock-names = "salvo_phy_clk";
+        power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
new file mode 100644
index 000000000000..0af765ba2793
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8 SoC series PCIe PHY
+
+maintainers:
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - fsl,imx8mm-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pciephy
+
+  fsl,refclk-pad-mode:
+    description: |
+      Specifies the mode of the refclk pad used. It can be UNUSED(PHY
+      refclock is derived from SoC internal source), INPUT(PHY refclock
+      is provided externally via the refclk pad) or OUTPUT(PHY refclock
+      is derived from SoC internal source and provided on the refclk pad).
+      Refer include/dt-bindings/phy/phy-imx8-pcie.h for the constants
+      to be used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2 ]
+
+  fsl,tx-deemph-gen1:
+    description: Gen1 De-emphasis value (optional).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,tx-deemph-gen2:
+    description: Gen2 De-emphasis value (optional).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,clkreq-unsupported:
+    type: boolean
+    description: A boolean property indicating the CLKREQ# signal is
+      not supported in the board design (optional)
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - fsl,refclk-pad-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/phy/phy-imx8-pcie.h>
+    #include <dt-bindings/reset/imx8mq-reset.h>
+
+    pcie_phy: pcie-phy@32f00000 {
+            compatible = "fsl,imx8mm-pcie-phy";
+            reg = <0x32f00000 0x10000>;
+            clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+            clock-names = "ref";
+            assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+            assigned-clock-rates = <100000000>;
+            assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
+            resets = <&src IMX8MQ_RESET_PCIEPHY>;
+            reset-names = "pciephy";
+            fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+            #phy-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
deleted file mode 100644
index ed47e5cd067e..000000000000
--- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Freescale i.MX8MQ USB3 PHY binding
-
-Required properties:
-- compatible:	Should be "fsl,imx8mq-usb-phy"
-- #phys-cells:	must be 0 (see phy-bindings.txt in this directory)
-- reg:		The base address and length of the registers
-- clocks:	phandles to the clocks for each clock listed in clock-names
-- clock-names:	must contain "phy"
-
-Optional properties:
-- vbus-supply: A phandle to the regulator for USB VBUS.
-
-Example:
-	usb3_phy0: phy@381f0040 {
-		compatible = "fsl,imx8mq-usb-phy";
-		reg = <0x381f0040 0x40>;
-		clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
-		clock-names = "phy";
-		#phy-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
new file mode 100644
index 000000000000..2936f3510a6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8mq-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MQ USB3 PHY binding
+
+maintainers:
+  - Li Jun <jun.li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-usb-phy
+      - fsl,imx8mp-usb-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: phy
+
+  vbus-supply:
+    description:
+      A phandle to the regulator for USB VBUS.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    usb3_phy0: phy@381f0040 {
+        compatible = "fsl,imx8mq-usb-phy";
+        reg = <0x381f0040 0x40>;
+        clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
+        clock-names = "phy";
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qm-lvds-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qm-lvds-phy.yaml
new file mode 100644
index 000000000000..8767e48c71a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8qm-lvds-phy.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8qm-lvds-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mixel LVDS PHY for Freescale i.MX8qm SoC
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Mixel LVDS PHY IP block is found on Freescale i.MX8qm SoC.
+  It converts two groups of four 7/10 bits of CMOS data into two
+  groups of four data lanes of LVDS data streams. A phase-locked
+  transmit clock is transmitted in parallel with each group of
+  data streams over a fifth LVDS link. Every cycle of the transmit
+  clock, 56/80 bits of input data are sampled and transmitted
+  through the two groups of LVDS data streams. Together with the
+  transmit clocks, the two groups of LVDS data streams form two
+  LVDS channels.
+
+  The Mixel LVDS PHY found on Freescale i.MX8qm SoC is controlled
+  by Control and Status Registers(CSR) module in the SoC. The CSR
+  module, as a system controller, contains the PHY's registers.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-lvds-phy
+      - mixel,28fdsoi-lvds-1250-8ch-tx-pll
+
+  "#phy-cells":
+    const: 1
+    description: |
+      Cell allows setting the LVDS channel index of the PHY.
+      Index 0 is for LVDS channel0 and index 1 is for LVDS channel1.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#phy-cells"
+  - clocks
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    phy {
+        compatible = "fsl,imx8qm-lvds-phy";
+        #phy-cells = <1>;
+        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
+        power-domains = <&pd IMX_SC_R_LVDS_0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml b/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
new file mode 100644
index 000000000000..4d91e2f4f247
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,lynx-28g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Lynx 28G SerDes PHY binding
+
+maintainers:
+  - Ioana Ciornei <ioana.ciornei@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,lynx-28g
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      serdes_1: phy@1ea0000 {
+        compatible = "fsl,lynx-28g";
+        reg = <0x0 0x1ea0000 0x0 0x1e30>;
+        #phy-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
new file mode 100644
index 000000000000..20b79e2e8b82
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,hi3660-usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Kirin 960 USB PHY
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+description: |+
+  Bindings for USB3 PHY on HiSilicon Kirin 960.
+
+properties:
+  compatible:
+    const: hisilicon,hi3660-usb-phy
+
+  "#phy-cells":
+    const: 0
+
+  hisilicon,pericrg-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle of syscon used to control iso refclk.
+
+  hisilicon,pctrl-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle of syscon used to control usb tcxo.
+
+  hisilicon,eye-diagram-param:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Eye diagram for phy.
+
+required:
+  - compatible
+  - hisilicon,pericrg-syscon
+  - hisilicon,pctrl-syscon
+  - hisilicon,eye-diagram-param
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy {
+        compatible = "hisilicon,hi3660-usb-phy";
+        #phy-cells = <0>;
+        hisilicon,pericrg-syscon = <&crg_ctrl>;
+        hisilicon,pctrl-syscon = <&pctrl>;
+        hisilicon,eye-diagram-param = <0x22466e4>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
new file mode 100644
index 000000000000..1cb00dbcd4c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,hi3670-usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Kirin970 USB PHY
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |+
+  Bindings for USB3 PHY on HiSilicon Kirin 970.
+
+properties:
+  compatible:
+    const: hisilicon,hi3670-usb-phy
+
+  "#phy-cells":
+    const: 0
+
+  hisilicon,pericrg-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle of syscon used to control iso refclk.
+
+  hisilicon,pctrl-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle of syscon used to control usb tcxo.
+
+  hisilicon,sctrl-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle of syscon used to control phy deep sleep.
+
+  hisilicon,eye-diagram-param:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Eye diagram for phy.
+
+  hisilicon,tx-vboost-lvl:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TX level vboost for phy.
+
+required:
+  - compatible
+  - hisilicon,pericrg-syscon
+  - hisilicon,pctrl-syscon
+  - hisilicon,sctrl-syscon
+  - hisilicon,eye-diagram-param
+  - hisilicon,tx-vboost-lvl
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy {
+        compatible = "hisilicon,hi3670-usb-phy";
+        #phy-cells = <0>;
+        hisilicon,pericrg-syscon = <&crg_ctrl>;
+        hisilicon,pctrl-syscon = <&pctrl>;
+        hisilicon,sctrl-syscon = <&sctrl>;
+        hisilicon,eye-diagram-param = <0xfdfee4>;
+        hisilicon,tx-vboost-lvl = <0x5>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml b/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
new file mode 100644
index 000000000000..17367a0275fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,phy-hi3670-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Kirin970 PCIe PHY
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |+
+  Bindings for PCIe PHY on HiSilicon Kirin 970.
+
+properties:
+  compatible:
+    const: hisilicon,hi970-pcie-phy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+    description: PHY Control registers
+
+  phy-supply:
+    description: The PCIe PHY power supply
+
+  clocks:
+    items:
+      - description: PCIe PHY clock
+      - description: PCIe AUX clock
+      - description: PCIe APB PHY clock
+      - description: PCIe APB SYS clock
+      - description: PCIe ACLK clock
+
+  clock-names:
+    items:
+      - const: phy_ref
+      - const: aux
+      - const: apb_phy
+      - const: apb_sys
+      - const: aclk
+
+  hisilicon,eye-diagram-param:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Eye diagram for phy.
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - hisilicon,eye-diagram-param
+  - phy-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/hi3670-clock.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      pcie_phy: pcie-phy@fc000000 {
+        compatible = "hisilicon,hi970-pcie-phy";
+        reg = <0x0 0xfc000000 0x0 0x80000>;
+        #phy-cells = <0>;
+        phy-supply = <&ldo33>;
+        clocks = <&crg_ctrl HI3670_CLK_GATE_PCIEPHY_REF>,
+                 <&crg_ctrl HI3670_CLK_GATE_PCIEAUX>,
+                 <&crg_ctrl HI3670_PCLK_GATE_PCIE_PHY>,
+                 <&crg_ctrl HI3670_PCLK_GATE_PCIE_SYS>,
+                 <&crg_ctrl HI3670_ACLK_GATE_PCIE>;
+        clock-names = "phy_ref", "aux",
+                      "apb_phy", "apb_sys", "aclk";
+        hisilicon,eye-diagram-param = <0xffffffff 0xffffffff
+                                       0xffffffff 0xffffffff 0xffffffff>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml b/Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml
new file mode 100644
index 000000000000..5cab21648632
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ingenic,phy-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs USB PHY devicetree bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+properties:
+  $nodename:
+    pattern: '^usb-phy@.*'
+
+  compatible:
+    enum:
+      - ingenic,jz4770-phy
+      - ingenic,jz4775-phy
+      - ingenic,jz4780-phy
+      - ingenic,x1000-phy
+      - ingenic,x1830-phy
+      - ingenic,x2000-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vcc-supply:
+    description: VCC power supply
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vcc-supply
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+    otg_phy: usb-phy@3c {
+      compatible = "ingenic,jz4770-phy";
+      reg = <0x3c 0x10>;
+
+      vcc-supply = <&vcc>;
+      clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
new file mode 100644
index 000000000000..5d54b0a0e873
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel ComboPhy Subsystem
+
+maintainers:
+  - Dilip Kota <eswara.kota@linux.intel.com>
+
+description: |
+  Intel Combophy subsystem supports PHYs for PCIe, EMAC and SATA
+  controllers. A single Combophy provides two PHY instances.
+
+properties:
+  $nodename:
+    pattern: "combophy(@.*|-[0-9a-f])*$"
+
+  compatible:
+    items:
+      - const: intel,combophy-lgm
+      - const: intel,combo-phy
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    items:
+      - description: ComboPhy core registers
+      - description: PCIe app core control registers
+
+  reg-names:
+    items:
+      - const: core
+      - const: app
+
+  resets:
+    maxItems: 4
+
+  reset-names:
+    items:
+      - const: phy
+      - const: core
+      - const: iphy0
+      - const: iphy1
+
+  intel,syscfg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to Chip configuration registers
+          - description: ComboPhy instance id
+    description: Chip configuration registers handle and ComboPhy instance id
+
+  intel,hsio:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to HSIO registers
+          - description: ComboPhy instance id
+    description: HSIO registers handle and ComboPhy instance id on NOC
+
+  intel,aggregation:
+    type: boolean
+    description: |
+      Specify the flag to configure ComboPHY in dual lane mode.
+
+  intel,phy-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Mode of the two phys in ComboPhy.
+      See dt-bindings/phy/phy.h for values.
+
+  "#phy-cells":
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reg-names
+  - intel,syscfg
+  - intel,hsio
+  - intel,phy-mode
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+    combophy@d0a00000 {
+        compatible = "intel,combophy-lgm", "intel,combo-phy";
+        clocks = <&cgu0 1>;
+        #phy-cells = <1>;
+        reg = <0xd0a00000 0x40000>,
+              <0xd0a40000 0x1000>;
+        reg-names = "core", "app";
+        resets = <&rcu0 0x50 6>,
+                 <&rcu0 0x50 17>,
+                 <&rcu0 0x50 23>,
+                 <&rcu0 0x50 24>;
+        reset-names = "phy", "core", "iphy0", "iphy1";
+        intel,syscfg = <&sysconf 0>;
+        intel,hsio = <&hsiol 0>;
+        intel,phy-mode = <PHY_TYPE_PCIE>;
+        intel,aggregation;
+    };
diff --git a/Documentation/devicetree/bindings/phy/intel,keembay-phy-usb.yaml b/Documentation/devicetree/bindings/phy/intel,keembay-phy-usb.yaml
new file mode 100644
index 000000000000..52815b6c2b88
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,keembay-phy-usb.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,keembay-phy-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay USB PHY bindings
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-usb-phy
+
+  reg:
+    items:
+      - description: USB APB CPR (clock, power, reset) register
+      - description: USB APB slave register
+
+  reg-names:
+    items:
+      - const: cpr-apb-base
+      - const: slv-apb-base
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@20400000 {
+          compatible = "intel,keembay-usb-phy";
+          reg = <0x20400000 0x1c>,
+                <0x20480000 0xd0>;
+          reg-names = "cpr-apb-base", "slv-apb-base";
+          #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
index 0ccee64c6962..ca818f83579b 100644
--- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings
+title: Intel Lightning Mountain(LGM) eMMC PHY
 
 maintainers:
   - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
@@ -23,7 +23,9 @@ description: |+
 
 properties:
   compatible:
-      const: intel,lgm-emmc-phy
+    enum:
+      - intel,lgm-emmc-phy
+      - intel,keembay-emmc-phy
 
   "#phy-cells":
     const: 0
@@ -34,12 +36,18 @@ properties:
   clocks:
     maxItems: 1
 
+  clock-names:
+    items:
+      - const: emmcclk
+
 required:
   - "#phy-cells"
   - compatible
   - reg
   - clocks
 
+additionalProperties: false
+
 examples:
   - |
     sysconf: chiptop@e0200000 {
@@ -55,4 +63,13 @@ examples:
         #phy-cells = <0>;
       };
     };
+
+  - |
+    phy@20290000 {
+          compatible = "intel,keembay-emmc-phy";
+          reg = <0x20290000 0x54>;
+          clocks = <&emmc>;
+          clock-names = "emmcclk";
+          #phy-cells = <0>;
+    };
 ...
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
new file mode 100644
index 000000000000..653a12286637
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,lgm-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel LGM USB PHY
+
+maintainers:
+  - Vadivel Murugan Ramuthevar <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+properties:
+  compatible:
+    const: intel,lgm-usb-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: USB PHY and Host controller reset
+      - description: APB BUS reset
+      - description: General Hardware reset
+
+  reset-names:
+    items:
+      - const: phy
+      - const: apb
+      - const: phy31
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@e7e00000 {
+        compatible = "intel,lgm-usb-phy";
+        reg = <0xe7e00000 0x10000>;
+        clocks = <&cgu0 153>;
+        resets = <&rcu 0x70 0x24>,
+                 <&rcu 0x70 0x26>,
+                 <&rcu 0x70 0x28>;
+        reset-names = "phy", "apb", "phy31";
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml b/Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml
new file mode 100644
index 000000000000..34bdb5c4cae8
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,phy-thunderbay-emmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Thunder Bay eMMC PHY bindings
+
+maintainers:
+  - Srikandan Nandhini <nandhini.srikandan@intel.com>
+
+properties:
+  compatible:
+    const: intel,thunderbay-emmc-phy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: emmcclk
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+     mmc_phy@80440800 {
+     #phy-cells = <0x0>;
+     compatible = "intel,thunderbay-emmc-phy";
+     status = "okay";
+     reg = <0x80440800 0x100>;
+     clocks = <&emmc>;
+     clock-names = "emmcclk";
+     };
diff --git a/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
index a97482179cf5..711de06bb0fc 100644
--- a/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/lantiq,vrx200-pcie-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Lantiq VRX200 and ARX300 PCIe PHY Device Tree Bindings
+title: Lantiq VRX200 and ARX300 PCIe PHY
 
 maintainers:
   - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml
new file mode 100644
index 000000000000..632d61c07f40
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/marvell,armada-3700-utmi-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Marvell Armada UTMI/UTMI+ PHY
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description:
+  On Armada 3700, there are two USB controllers, one is compatible with
+  the USB2 and USB3 specifications and supports OTG. The other one is USB2
+  compliant and only supports host mode. Both of these controllers come with
+  a slightly different UTMI PHY.
+
+properties:
+  compatible:
+    enum:
+      - marvell,a3700-utmi-host-phy
+      - marvell,a3700-utmi-otg-phy
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  marvell,usb-misc-reg:
+    description:
+      Phandle on the "USB miscellaneous registers" shared region
+      covering registers related to both the host controller and
+      the PHY.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - marvell,usb-misc-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb2_utmi_host_phy: phy@5f000 {
+      compatible = "marvell,a3700-utmi-host-phy";
+      reg = <0x5f000 0x800>;
+      marvell,usb-misc-reg = <&usb2_syscon>;
+      #phy-cells = <0>;
+    };
+
+    usb2_syscon: system-controller@5f800 {
+      compatible = "marvell,armada-3700-usb2-host-misc", "syscon";
+      reg = <0x5f800 0x800>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml
new file mode 100644
index 000000000000..30f3b5f32a95
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/marvell,armada-cp110-utmi-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Marvell Armada CP110/CP115 UTMI PHY
+
+maintainers:
+  - Konstantin Porotchkin <kostap@marvell.com>
+
+description:
+  On Armada 7k/8k and CN913x, there are two host and one device USB controllers.
+  Each of two exiting UTMI PHYs could be connected to either USB host or USB device
+  controller.
+  The USB device controller can only be connected to a single UTMI PHY port
+                      0.H----- USB HOST0
+  UTMI PHY0  --------/
+                      0.D-----0
+                               \------ USB DEVICE
+                      1.D-----1
+  UTMI PHY1  --------\
+                      1.H----- USB HOST1
+
+properties:
+  compatible:
+    const: marvell,cp110-utmi-phy
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  marvell,system-controller:
+    description:
+      Phandle to the system controller node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+#Required child nodes:
+
+patternProperties:
+  "^usb-phy@[0|1]$":
+    type: object
+    description:
+      Each UTMI PHY port must be represented as a sub-node.
+
+    properties:
+      reg:
+        description: phy port index.
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - marvell,system-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    cp0_utmi: utmi@580000 {
+      compatible = "marvell,cp110-utmi-phy";
+      reg = <0x580000 0x2000>;
+      marvell,system-controller = <&cp0_syscon0>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cp0_utmi0: usb-phy@0 {
+        reg = <0>;
+        #phy-cells = <0>;
+      };
+
+      cp0_utmi1: usb-phy@1 {
+        reg = <1>;
+        #phy-cells = <0>;
+      };
+    };
+
+    cp0_usb3_0 {
+      usb-phy = <&cp0_usb3_0_phy0>;
+      phys = <&cp0_utmi0>;
+      phy-names = "utmi";
+      /* UTMI0 is connected to USB host controller (default mode) */
+      dr_mode = "host";
+    };
+
+    cp0_usb3_1 {
+      usb-phy = <&cp0_usb3_0_phy1>;
+      phys = <&cp0_utmi1>;
+      phy-names = "utmi";
+      /* UTMI1 is connected to USB device controller */
+      dr_mode = "peripheral";
+    };
diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
index 5ab436189f3b..ff255aa4cc10 100644
--- a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
 # Copyright 2019 Lubomir Rintel <lkundrak@v3.sk>
 %YAML 1.2
 ---
@@ -18,25 +18,20 @@ properties:
     maxItems: 1
     description: base address of the device
 
-  reset-gpios:
-    maxItems: 1
-    description: GPIO connected to reset
-
   "#phy-cells":
     const: 0
 
 required:
   - compatible
   - reg
-  - reset-gpios
   - "#phy-cells"
 
+additionalProperties: false
+
 examples:
   - |
-    #include <dt-bindings/gpio/gpio.h>
     hsic-phy@f0001800 {
             compatible = "marvell,mmp3-hsic-phy";
             reg = <0xf0001800 0x40>;
-            reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
             #phy-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml
new file mode 100644
index 000000000000..c97043eaa8fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,mmp3-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP3 USB PHY bindings
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  $nodename:
+    pattern: '^usb-phy@[a-f0-9]+$'
+
+  compatible:
+    const: marvell,mmp3-usb-phy
+
+  reg:
+    maxItems: 1
+    description: base address of the device
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@d4207000 {
+      compatible = "marvell,mmp3-usb-phy";
+      reg = <0xd4207000 0x40>;
+      #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
new file mode 100644
index 000000000000..9c2a7345955d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MIPI Display Serial Interface (DSI) PHY binding
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: The MIPI DSI PHY supports up to 4-lane output.
+
+properties:
+  $nodename:
+    pattern: "^dsi-phy@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7623-mipi-tx
+          - const: mediatek,mt2701-mipi-tx
+      - items:
+          - enum:
+              - mediatek,mt8365-mipi-tx
+          - const: mediatek,mt8183-mipi-tx
+      - const: mediatek,mt2701-mipi-tx
+      - const: mediatek,mt8173-mipi-tx
+      - const: mediatek,mt8183-mipi-tx
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PLL reference clock
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  "#clock-cells":
+    const: 0
+
+  nvmem-cells:
+    maxItems: 1
+    description: A phandle to the calibration data provided by a nvmem device,
+      if unspecified, default values shall be used.
+
+  nvmem-cell-names:
+    items:
+      - const: calibration-data
+
+  drive-strength-microamp:
+    description: adjust driving current
+    multipleOf: 200
+    minimum: 2000
+    maximum: 6000
+    default: 4600
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+  - "#phy-cells"
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    dsi-phy@10215000 {
+        compatible = "mediatek,mt8173-mipi-tx";
+        reg = <0x10215000 0x1000>;
+        clocks = <&clk26m>;
+        clock-output-names = "mipi_tx0_pll";
+        drive-strength-microamp = <4000>;
+        nvmem-cells= <&mipi_tx_calibration>;
+        nvmem-cell-names = "calibration-data";
+        #clock-cells = <0>;
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml
new file mode 100644
index 000000000000..0d94950b84ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,hdmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek High Definition Multimedia Interface (HDMI) PHY binding
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel
+  output and drives the HDMI pads.
+
+properties:
+  $nodename:
+    pattern: "^hdmi-phy@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7623-hdmi-phy
+          - const: mediatek,mt2701-hdmi-phy
+      - const: mediatek,mt2701-hdmi-phy
+      - const: mediatek,mt8173-hdmi-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: pll_ref
+
+  clock-output-names:
+    items:
+      - const: hdmitx_dig_cts
+
+  "#phy-cells":
+    const: 0
+
+  "#clock-cells":
+    const: 0
+
+  mediatek,ibias:
+    description:
+      TX DRV bias current for < 1.65Gbps
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 63
+    default: 0xa
+
+  mediatek,ibias_up:
+    description:
+      TX DRV bias current for >= 1.65Gbps
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 63
+    default: 0x1c
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-output-names
+  - "#phy-cells"
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    hdmi_phy: hdmi-phy@10209100 {
+        compatible = "mediatek,mt8173-hdmi-phy";
+        reg = <0x10209100 0x24>;
+        clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+        clock-names = "pll_ref";
+        clock-output-names = "hdmitx_dig_cts";
+        mediatek,ibias = <0xa>;
+        mediatek,ibias_up = <0x1c>;
+        #clock-cells = <0>;
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml
new file mode 100644
index 000000000000..c2f4cb0b254a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/mediatek,mt7621-pci-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Mediatek Mt7621 PCIe PHY
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+properties:
+  compatible:
+    const: mediatek,mt7621-pci-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 1
+    description: selects if the phy is dual-ported
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie0_phy: pcie-phy@1e149000 {
+      compatible = "mediatek,mt7621-pci-phy";
+      reg = <0x1e149000 0x0700>;
+      clocks = <&sysc 0>;
+      #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
new file mode 100644
index 000000000000..422750cc4121
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIe PHY
+
+maintainers:
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |
+  The PCIe PHY supports physical layer functionality for PCIe Gen3 port.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: sif
+
+  "#phy-cells":
+    const: 0
+
+  nvmem-cells:
+    maxItems: 7
+    description:
+      Phandles to nvmem cell that contains the efuse data, if unspecified,
+      default value is used.
+
+  nvmem-cell-names:
+    items:
+      - const: glb_intr
+      - const: tx_ln0_pmos
+      - const: tx_ln0_nmos
+      - const: rx_ln0
+      - const: tx_ln1_pmos
+      - const: tx_ln1_nmos
+      - const: rx_ln1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@11e80000 {
+        compatible = "mediatek,mt8195-pcie-phy";
+        #phy-cells = <0>;
+        reg = <0x11e80000 0x10000>;
+        reg-names = "sif";
+        nvmem-cells = <&pciephy_glb_intr>,
+                      <&pciephy_tx_ln0_pmos>,
+                      <&pciephy_tx_ln0_nmos>,
+                      <&pciephy_rx_ln0>,
+                      <&pciephy_tx_ln1_pmos>,
+                      <&pciephy_tx_ln1_nmos>,
+                      <&pciephy_rx_ln1>;
+        nvmem-cell-names = "glb_intr", "tx_ln0_pmos",
+                           "tx_ln0_nmos", "rx_ln0",
+                           "tx_ln1_pmos", "tx_ln1_nmos",
+                           "rx_ln1";
+        power-domains = <&spm 2>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
new file mode 100644
index 000000000000..5613cc5106e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -0,0 +1,312 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek T-PHY Controller
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  The T-PHY controller supports physical layer functionality for a number of
+  controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA.
+
+  Layout differences of banks between T-PHY V1 (mt8173/mt2701) and
+  T-PHY V2 (mt2712) / V3 (mt8195) when works on USB mode:
+  -----------------------------------
+  Version 1:
+  port        offset    bank
+  shared      0x0000    SPLLC
+              0x0100    FMREG
+  u2 port0    0x0800    U2PHY_COM
+  u3 port0    0x0900    U3PHYD
+              0x0a00    U3PHYD_BANK2
+              0x0b00    U3PHYA
+              0x0c00    U3PHYA_DA
+  u2 port1    0x1000    U2PHY_COM
+  u3 port1    0x1100    U3PHYD
+              0x1200    U3PHYD_BANK2
+              0x1300    U3PHYA
+              0x1400    U3PHYA_DA
+  u2 port2    0x1800    U2PHY_COM
+              ...
+
+  Version 2/3:
+  port        offset    bank
+  u2 port0    0x0000    MISC
+              0x0100    FMREG
+              0x0300    U2PHY_COM
+  u3 port0    0x0700    SPLLC
+              0x0800    CHIP
+              0x0900    U3PHYD
+              0x0a00    U3PHYD_BANK2
+              0x0b00    U3PHYA
+              0x0c00    U3PHYA_DA
+  u2 port1    0x1000    MISC
+              0x1100    FMREG
+              0x1300    U2PHY_COM
+  u3 port1    0x1700    SPLLC
+              0x1800    CHIP
+              0x1900    U3PHYD
+              0x1a00    U3PHYD_BANK2
+              0x1b00    U3PHYA
+              0x1c00    U3PHYA_DA
+  u2 port2    0x2000    MISC
+              ...
+
+  SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back
+  into each port; a new bank MISC for u2 ports and CHIP for u3 ports are
+  added on V2; the FMREG bank for slew rate calibration is not used anymore
+  and reserved on V3;
+
+properties:
+  $nodename:
+    pattern: "^t-phy@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-tphy
+              - mediatek,mt7623-tphy
+              - mediatek,mt7622-tphy
+              - mediatek,mt8516-tphy
+          - const: mediatek,generic-tphy-v1
+      - items:
+          - enum:
+              - mediatek,mt2712-tphy
+              - mediatek,mt7629-tphy
+              - mediatek,mt8183-tphy
+              - mediatek,mt8186-tphy
+              - mediatek,mt8192-tphy
+              - mediatek,mt8365-tphy
+          - const: mediatek,generic-tphy-v2
+      - items:
+          - enum:
+              - mediatek,mt8188-tphy
+              - mediatek,mt8195-tphy
+          - const: mediatek,generic-tphy-v3
+      - const: mediatek,mt2701-u3phy
+        deprecated: true
+      - const: mediatek,mt2712-u3phy
+        deprecated: true
+      - const: mediatek,mt8173-u3phy
+
+  reg:
+    description:
+      Register shared by multiple ports, exclude port's private register.
+      It is needed for T-PHY V1, such as mt2701 and mt8173, but not for
+      T-PHY V2/V3, such as mt2712.
+    maxItems: 1
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  # Used with non-empty value if optional 'reg' is not provided.
+  # The format of the value is an arbitrary number of triplets of
+  # (child-bus-address, parent-bus-address, length).
+  ranges: true
+
+  mediatek,src-ref-clk-mhz:
+    description:
+      Frequency of reference clock for slew rate calibrate
+    default: 26
+
+  mediatek,src-coef:
+    description:
+      Coefficient for slew rate calibrate, depends on SoC process
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 28
+
+# Required child node:
+patternProperties:
+  "^(usb|pcie|sata)-phy@[0-9a-f]+$":
+    type: object
+    description:
+      A sub-node is required for each port the controller provides.
+      Address range information including the usual 'reg' property
+      is used inside these nodes to describe the controller's topology.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clocks:
+        minItems: 1
+        items:
+          - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
+          - description: Reference clock of analog phy
+        description:
+          Uses both clocks if the clock of analog and digital phys are
+          separated, otherwise uses "ref" clock only if needed.
+
+      clock-names:
+        minItems: 1
+        items:
+          - const: ref
+          - const: da_ref
+
+      "#phy-cells":
+        const: 1
+        description: |
+          The cells contain the following arguments.
+
+          - description: The PHY type
+              enum:
+                - PHY_TYPE_USB2
+                - PHY_TYPE_USB3
+                - PHY_TYPE_PCIE
+                - PHY_TYPE_SATA
+                - PHY_TYPE_SGMII
+
+      nvmem-cells:
+        items:
+          - description: internal R efuse for U2 PHY or U3/PCIe PHY
+          - description: rx_imp_sel efuse for U3/PCIe PHY
+          - description: tx_imp_sel efuse for U3/PCIe PHY
+        description: |
+          Phandles to nvmem cell that contains the efuse data;
+          Available only for U2 PHY or U3/PCIe PHY of version 2/3, these
+          three items should be provided at the same time for U3/PCIe PHY,
+          when use software to load efuse;
+          If unspecified, will use hardware auto-load efuse.
+
+      nvmem-cell-names:
+        items:
+          - const: intr
+          - const: rx_imp
+          - const: tx_imp
+
+      # The following optional vendor properties are only for debug or HQA test
+      mediatek,eye-src:
+        description:
+          The value of slew rate calibrate (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-vrt:
+        description:
+          The selection of VRT reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-term:
+        description:
+          The selection of HS_TX TERM reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,intr:
+        description:
+          The selection of internal resistor (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 31
+
+      mediatek,discth:
+        description:
+          The selection of disconnect threshold (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 15
+
+      mediatek,pre-emphasis:
+        description:
+          The level of pre-emphasis which used to widen the eye opening and
+          boost eye swing, the unit step is about 4.16% increment; e.g. the
+          level 1 means amplitude increases about 4.16%, the level 2 is about
+          8.3% etc. (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 3
+
+      mediatek,bc12:
+        description:
+          Specify the flag to enable BC1.2 if support it
+        type: boolean
+
+      mediatek,syscon-type:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 1
+        description:
+          A phandle to syscon used to access the register of type switch,
+          the field should always be 3 cells long.
+        items:
+          items:
+            - description:
+                The first cell represents a phandle to syscon
+            - description:
+                The second cell represents the register offset
+            - description:
+                The third cell represents the index of config segment
+              enum: [0, 1, 2, 3]
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    usb@11271000 {
+        compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3";
+        reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
+        reg-names = "mac", "ippc";
+        phys = <&u2port0 PHY_TYPE_USB2>,
+               <&u3port0 PHY_TYPE_USB3>,
+               <&u2port1 PHY_TYPE_USB2>;
+        interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_USB30_SEL>;
+        clock-names = "sys_ck";
+    };
+
+    t-phy@11290000 {
+        compatible = "mediatek,mt8173-u3phy";
+        reg = <0x11290000 0x800>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        u2port0: usb-phy@11290800 {
+            reg = <0x11290800 0x100>;
+            clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>;
+            clock-names = "ref", "da_ref";
+            #phy-cells = <1>;
+        };
+
+        u3port0: usb-phy@11290900 {
+            reg = <0x11290900 0x700>;
+            clocks = <&clk26m>;
+            clock-names = "ref";
+            #phy-cells = <1>;
+        };
+
+        u2port1: usb-phy@11291000 {
+            reg = <0x11291000 0x100>;
+            #phy-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml
new file mode 100644
index 000000000000..74cc32c1d2e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,ufs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Universal Flash Storage (UFS) M-PHY binding
+
+maintainers:
+  - Stanley Chu <stanley.chu@mediatek.com>
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro.
+  Each UFS M-PHY node should have its own node.
+  To bind UFS M-PHY with UFS host controller, the controller node should
+  contain a phandle reference to UFS M-PHY node.
+
+properties:
+  $nodename:
+    pattern: "^ufs-phy@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8195-ufsphy
+          - const: mediatek,mt8183-ufsphy
+      - const: mediatek,mt8183-ufsphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Unipro core control clock.
+      - description: M-PHY core control clock.
+
+  clock-names:
+    items:
+      - const: unipro
+      - const: mp
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    ufsphy: ufs-phy@11fa0000 {
+        compatible = "mediatek,mt8183-ufsphy";
+        reg = <0x11fa0000 0xc000>;
+        clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+                 <&infracfg CLK_INFRA_UFS_MP_SAP_BCLK>;
+        clock-names = "unipro", "mp";
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
new file mode 100644
index 000000000000..a9e3139fd421
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek XS-PHY Controller
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  The XS-PHY controller supports physical layer functionality for USB3.1
+  GEN2 controller on MediaTek SoCs.
+
+  Banks layout of xsphy
+  ----------------------------------
+  port        offset    bank
+  u2 port0    0x0000    MISC
+              0x0100    FMREG
+              0x0300    U2PHY_COM
+  u2 port1    0x1000    MISC
+              0x1100    FMREG
+              0x1300    U2PHY_COM
+  u2 port2    0x2000    MISC
+              ...
+  u31 common  0x3000    DIG_GLB
+              0x3100    PHYA_GLB
+  u31 port0   0x3400    DIG_LN_TOP
+              0x3500    DIG_LN_TX0
+              0x3600    DIG_LN_RX0
+              0x3700    DIG_LN_DAIF
+              0x3800    PHYA_LN
+  u31 port1   0x3a00    DIG_LN_TOP
+              0x3b00    DIG_LN_TX0
+              0x3c00    DIG_LN_RX0
+              0x3d00    DIG_LN_DAIF
+              0x3e00    PHYA_LN
+              ...
+  DIG_GLB & PHYA_GLB are shared by U31 ports.
+
+properties:
+  $nodename:
+    pattern: "^xs-phy@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt3611-xsphy
+          - mediatek,mt3612-xsphy
+      - const: mediatek,xsphy
+
+  reg:
+    description:
+      Register shared by multiple U3 ports, exclude port's private register,
+      if only U2 ports provided, shouldn't use the property.
+    maxItems: 1
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  ranges: true
+
+  mediatek,src-ref-clk-mhz:
+    description:
+      Frequency of reference clock for slew rate calibrate
+    default: 26
+
+  mediatek,src-coef:
+    description:
+      Coefficient for slew rate calibrate, depends on SoC process
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 17
+
+# Required child node:
+patternProperties:
+  "^usb-phy@[0-9a-f]+$":
+    type: object
+    description:
+      A sub-node is required for each port the controller provides.
+      Address range information including the usual 'reg' property
+      is used inside these nodes to describe the controller's topology.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clocks:
+        items:
+          - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
+
+      clock-names:
+        items:
+          - const: ref
+
+      "#phy-cells":
+        const: 1
+        description: |
+          The cells contain the following arguments.
+
+          - description: The PHY type
+              enum:
+                - PHY_TYPE_USB2
+                - PHY_TYPE_USB3
+
+      # The following optional vendor properties are only for debug or HQA test
+      mediatek,eye-src:
+        description:
+          The value of slew rate calibrate (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-vrt:
+        description:
+          The selection of VRT reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-term:
+        description:
+          The selection of HS_TX TERM reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,efuse-intr:
+        description:
+          The selection of Internal Resistor (U2/U3 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 63
+
+      mediatek,efuse-tx-imp:
+        description:
+          The selection of TX Impedance (U3 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 31
+
+      mediatek,efuse-rx-imp:
+        description:
+          The selection of RX Impedance (U3 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 31
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    u3phy: xs-phy@11c40000 {
+        compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy";
+        reg = <0x11c43000 0x0200>;
+        mediatek,src-ref-clk-mhz = <26>;
+        mediatek,src-coef = <17>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        u2port0: usb-phy@11c40000 {
+            reg = <0x11c40000 0x0400>;
+            clocks = <&clk48m>;
+            clock-names = "ref";
+            mediatek,eye-src = <4>;
+            #phy-cells = <1>;
+        };
+
+        u3port0: usb-phy@11c43000 {
+            reg = <0x11c43400 0x0500>;
+            clocks = <&clk26m>;
+            clock-names = "ref";
+            mediatek,efuse-intr = <28>;
+            #phy-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt b/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt
deleted file mode 100644
index 114947e1de3d..000000000000
--- a/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Amlogic Meson GXL and GXM USB3 PHY and OTG detection binding
-
-Required properties:
-- compatible:	Should be "amlogic,meson-gxl-usb3-phy"
-- #phys-cells:	must be 0 (see phy-bindings.txt in this directory)
-- reg:		The base address and length of the registers
-- interrupts:	the interrupt specifier for the OTG detection
-- clocks:	phandles to the clocks for
-		- the USB3 PHY
-		- and peripheral mode/OTG detection
-- clock-names:	must contain "phy" and "peripheral"
-- resets:	phandle to the reset lines for:
-		- the USB3 PHY and
-		- peripheral mode/OTG detection
-- reset-names:	must contain "phy" and "peripheral"
-
-Optional properties:
-- phy-supply:	see phy-bindings.txt in this directory
-
-
-Example:
-	usb3_phy0: phy@78080 {
-		compatible = "amlogic,meson-gxl-usb3-phy";
-		#phy-cells = <0>;
-		reg = <0x0 0x78080 0x0 0x20>;
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clkc CLKID_USB_OTG>, <&clkc_AO CLKID_AO_CEC_32K>;
-		clock-names = "phy", "peripheral";
-		resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>;
-		reset-names = "phy", "peripheral";
-	};
diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
deleted file mode 100644
index d81d73aea608..000000000000
--- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Amlogic Meson8, Meson8b and GXBB USB2 PHY
-
-Required properties:
-- compatible:	Depending on the platform this should be one of:
-	"amlogic,meson8-usb2-phy"
-	"amlogic,meson8b-usb2-phy"
-	"amlogic,meson-gxbb-usb2-phy"
-- reg:		The base address and length of the registers
-- #phys-cells:	should be 0 (see phy-bindings.txt in this directory)
-- clocks:	phandle and clock identifier for the phy clocks
-- clock-names:	"usb_general" and "usb"
-
-Optional properties:
-- resets:	reference to the reset controller
-- phy-supply:	see phy-bindings.txt in this directory
-
-
-Example:
-
-usb0_phy: usb-phy@c0000000 {
-	compatible = "amlogic,meson-gxbb-usb2-phy";
-	#phy-cells = <0>;
-	reg = <0x0 0xc0000000 0x0 0x20>;
-	resets = <&reset RESET_USB_OTG>;
-	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
-	clock-names = "usb_general", "usb";
-	phy-supply = <&usb_vbus>;
-};
diff --git a/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
new file mode 100644
index 000000000000..6e914fbbac56
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/microchip,lan966x-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Lan966x Serdes controller
+
+maintainers:
+  - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+  Lan966x has 7 interfaces, consisting of 2 copper transceivers(CU),
+  3 SERDES6G and 2 RGMII interfaces. Two of the SERDES6G support QSGMII.
+  Also it has 8 logical Ethernet ports which can be connected to these
+  interfaces. The Serdes controller will allow to configure these interfaces
+  and allows to "mux" the interfaces to different ports.
+
+  For simple selection of the interface that is used with a port, the
+  following macros are defined CU(X), SERDES6G(X), RGMII(X). Where X is a
+  number that represents the index of that interface type. For example
+  CU(1) means use interface copper transceivers 1. SERDES6G(2) means use
+  interface SerDes 2.
+
+properties:
+  $nodename:
+    pattern: "^serdes@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,lan966x-serdes
+
+  reg:
+    items:
+      - description: HSIO registers
+      - description: HW_STAT register
+
+  '#phy-cells':
+    const: 2
+    description: |
+      - Input port to use for a given macro.
+      - The macro to be used. The macros are defined in
+        dt-bindings/phy/phy-lan966x-serdes.
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    serdes: serdes@e2004010 {
+      compatible = "microchip,lan966x-serdes";
+      reg = <0xe202c000 0x9c>, <0xe2004010 0x4>;
+      #phy-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
new file mode 100644
index 000000000000..bdbdb3bbddbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/microchip,sparx5-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Serdes controller
+
+maintainers:
+  - Steen Hegelund <steen.hegelund@microchip.com>
+
+description: |
+  The Sparx5 SERDES interfaces share the same basic functionality, but
+  support different operating modes and line rates.
+
+  The following list lists the SERDES features:
+
+  * RX Adaptive Decision Feedback Equalizer (DFE)
+  * Programmable continuous time linear equalizer (CTLE)
+  * Rx variable gain control
+  * Rx built-in fault detector (loss-of-lock/loss-of-signal)
+  * Adjustable tx de-emphasis (FFE)
+  * Tx output amplitude control
+  * Supports rx eye monitor
+  * Multiple loopback modes
+  * Prbs generator and checker
+  * Polarity inversion control
+
+  SERDES6G:
+
+  The SERDES6G is a high-speed SERDES interface, which can operate at
+  the following data rates:
+
+  * 100 Mbps (100BASE-FX)
+  * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
+  * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
+  * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
+
+  SERDES10G
+
+  The SERDES10G is a high-speed SERDES interface, which can operate at
+  the following data rates:
+
+  * 100 Mbps (100BASE-FX)
+  * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
+  * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
+  * 5 Gbps (QSGMII/USGMII)
+  * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
+  * 10 Gbps (10G-USGMII)
+  * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII)
+
+  SERDES25G
+
+  The SERDES25G is a high-speed SERDES interface, which can operate at
+  the following data rates:
+
+  * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
+  * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
+  * 5 Gbps (QSGMII/USGMII)
+  * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
+  * 10 Gbps (10G-USGMII)
+  * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII)
+  * 25.78125 Gbps (25GBASE-KR/25GBASE-CR/25GBASE-SR/25GBASE-LR/25GBASE-ER)
+
+properties:
+  $nodename:
+    pattern: "^serdes@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,sparx5-serdes
+
+  reg:
+    minItems: 1
+
+  '#phy-cells':
+    const: 1
+    description: |
+      - The main serdes input port
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    serdes: serdes@10808000 {
+      compatible = "microchip,sparx5-serdes";
+      #phy-cells = <1>;
+      clocks = <&sys_clk>;
+      reg = <0x10808000 0x5d0000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
deleted file mode 100644
index 9b23407233c0..000000000000
--- a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Mixel DSI PHY for i.MX8
-
-The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
-MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
-electrical signals for DSI.
-
-Required properties:
-- compatible: Must be:
-  - "fsl,imx8mq-mipi-dphy"
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Must contain the following entries:
-  - "phy_ref": phandle and specifier referring to the DPHY ref clock
-- reg: the register range of the PHY controller
-- #phy-cells: number of cells in PHY, as defined in
-  Documentation/devicetree/bindings/phy/phy-bindings.txt
-  this must be <0>
-
-Optional properties:
-- power-domains: phandle to power domain
-
-Example:
-	dphy: dphy@30a0030 {
-		compatible = "fsl,imx8mq-mipi-dphy";
-		clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
-		clock-names = "phy_ref";
-		reg = <0x30a00300 0x100>;
-		power-domains = <&pd_mipi0>;
-		#phy-cells = <0>;
-        };
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
new file mode 100644
index 000000000000..786cfd71cb7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mixel,mipi-dsi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mixel DSI PHY for i.MX8
+
+maintainers:
+  - Guido Günther <agx@sigxcpu.org>
+
+description: |
+  The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
+  MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
+  electrical signals for DSI.
+
+  The Mixel PHY IP block found on i.MX8qxp is a combo PHY that can work
+  in either MIPI-DSI PHY mode or LVDS PHY mode.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-mipi-dphy
+      - fsl,imx8qxp-mipi-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: phy_ref
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  fsl,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to Control and Status Registers(CSR) module.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-mipi-dphy
+    then:
+      properties:
+        fsl,syscon: false
+
+      required:
+        - assigned-clocks
+        - assigned-clock-parents
+        - assigned-clock-rates
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-mipi-dphy
+    then:
+      properties:
+        assigned-clocks: false
+        assigned-clock-parents: false
+        assigned-clock-rates: false
+
+      required:
+        - fsl,syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    dphy: dphy@30a0030 {
+        compatible = "fsl,imx8mq-mipi-dphy";
+        reg = <0x30a00300 0x100>;
+        clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+        clock-names = "phy_ref";
+        assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+        assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+        assigned-clock-rates = <24000000>;
+        #phy-cells = <0>;
+        power-domains = <&pgc_mipi>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml b/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml
new file mode 100644
index 000000000000..3169b873231e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mscc,vsc7514-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi Ocelot SerDes muxing
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - UNGLinuxDriver@microchip.com
+
+description: |
+  On Microsemi Ocelot, there is a handful of registers in HSIO address
+  space for setting up the SerDes to switch port muxing.
+
+  A SerDes X can be "muxed" to work with switch port Y or Z for example.
+  One specific SerDes can also be used as a PCIe interface.
+
+  Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one.
+
+  There are two kinds of SerDes: SERDES1G supports 10/100Mbps in
+  half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports
+  10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode.
+
+  Also, SERDES6G number (aka "macro") 0 is the only interface supporting
+  QSGMII.
+
+  This is a child of the HSIO syscon ("mscc,ocelot-hsio", see
+  Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot.
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc7514-serdes
+
+  "#phy-cells":
+    const: 2
+    description: |
+      The first number defines the input port to use for a given SerDes macro.
+      The second defines the macro to use. They are defined in
+      dt-bindings/phy/phy-ocelot-serdes.h
+
+required:
+  - compatible
+  - "#phy-cells"
+
+additionalProperties:
+  false
+
+examples:
+  - |
+    serdes: serdes {
+      compatible = "mscc,vsc7514-serdes";
+      #phy-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
index c9f5c0caf8a9..70c813b0755f 100644
--- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
@@ -8,16 +8,17 @@ Required properties:
 	* "fsl,vf610-usbphy" for Vybrid vf610
 	* "fsl,imx6sx-usbphy" for imx6sx
 	* "fsl,imx7ulp-usbphy" for imx7ulp
+	* "fsl,imx8dxl-usbphy" for imx8dxl
   "fsl,imx23-usbphy" is still a fallback for other strings
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt
 - fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
 
 Optional properties:
-- fsl,tx-cal-45-dn-ohms: Integer [30-55]. Resistance (in ohms) of switchable
+- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable
   high-speed trimming resistor connected in parallel with the 45 ohm resistor
   that terminates the DN output signal. Default: 45
-- fsl,tx-cal-45-dp-ohms: Integer [30-55]. Resistance (in ohms) of switchable
+- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable
   high-speed trimming resistor connected in parallel with the 45 ohm resistor
   that terminates the DP output signal. Default: 45
 - fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
index 9fb682e47c29..b62397d2bb0c 100644
--- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
@@ -37,6 +37,7 @@ Required properties:
   - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"
   - Tegra210: "nvidia,tegra210-xusb-padctl"
   - Tegra186: "nvidia,tegra186-xusb-padctl"
+  - Tegra194: "nvidia,tegra194-xusb-padctl"
 - reg: Physical base address and length of the controller's registers.
 - resets: Must contain an entry for each entry in reset-names.
 - reset-names: Must include the following entries:
@@ -53,6 +54,7 @@ For Tegra210:
 - avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
 - dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
 - hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
+- nvidia,pmc: phandle and specifier referring to the Tegra210 PMC node.
 
 For Tegra186:
 - avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY
@@ -62,6 +64,10 @@ For Tegra186:
 - vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
 - vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V.
 
+For Tegra194:
+- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply
+  3.3 V.
+- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
 
 Pad nodes:
 ==========
@@ -154,6 +160,11 @@ For Tegra210, the list of valid PHY nodes is given below:
 - sata: sata-0
   - functions: "usb3-ss", "sata"
 
+For Tegra194, the list of valid PHY nodes is given below:
+- usb2: usb2-0, usb2-1, usb2-2, usb2-3
+  - functions: "xusb"
+- usb3: usb3-0, usb3-1, usb3-2, usb3-3
+  - functions: "xusb"
 
 Port nodes:
 ===========
@@ -174,6 +185,12 @@ Required properties:
   - "device": for USB device mode
   - "otg": for USB OTG mode
 
+Required properties for OTG/Peripheral capable USB2 ports:
+- usb-role-switch: Boolean property to indicate that the port support OTG or
+  peripheral mode. If present, the port supports switching between USB host
+  and peripheral roles. Connector should be added as subnode.
+  See usb/usb-conn-gpio.txt.
+
 Optional properties:
 - nvidia,internal: A boolean property whose presence determines that a port
   is internal. In the absence of this property the port is considered to be
@@ -221,6 +238,11 @@ Optional properties:
   is internal. In the absence of this property the port is considered to be
   external.
 
+- maximum-speed: Only for Tegra194. A string property that specifies maximum
+  supported speed of a usb3 port. Valid values are:
+  - "super-speed-plus": default, the usb3 port supports USB 3.1 Gen 2 speed.
+  - "super-speed": the usb3 port supports USB 3.1 Gen 1 speed only.
+
 For Tegra124 and Tegra132, the XUSB pad controller exposes the following
 ports:
 - 3x USB2: usb2-0, usb2-1, usb2-2
@@ -233,6 +255,9 @@ For Tegra210, the XUSB pad controller exposes the following ports:
 - 2x HSIC: hsic-0, hsic-1
 - 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
 
+For Tegra194, the XUSB pad controller exposes the following ports:
+- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3
+- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
 
 Examples:
 =========
diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt
deleted file mode 100644
index 1aa6f2674af5..000000000000
--- a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-Tegra SOC USB PHY
-
-The device node for Tegra SOC USB PHY:
-
-Required properties :
- - compatible : For Tegra20, must contain "nvidia,tegra20-usb-phy".
-   For Tegra30, must contain "nvidia,tegra30-usb-phy".  Otherwise, must contain
-   "nvidia,<chip>-usb-phy" plus at least one of the above, where <chip> is
-   tegra114, tegra124, tegra132, or tegra210.
- - reg : Defines the following set of registers, in the order listed:
-   - The PHY's own register set.
-     Always present.
-   - The register set of the PHY containing the UTMI pad control registers.
-     Present if-and-only-if phy_type == utmi.
- - phy_type : Should be one of "utmi", "ulpi" or "hsic".
- - clocks : Defines the clocks listed in the clock-names property.
- - clock-names : The following clock names must be present:
-   - reg: The clock needed to access the PHY's own registers. This is the
-     associated EHCI controller's clock. Always present.
-   - pll_u: PLL_U. Always present.
-   - timer: The timeout clock (clk_m). Present if phy_type == utmi.
-   - utmi-pads: The clock needed to access the UTMI pad control registers.
-     Present if phy_type == utmi.
-   - ulpi-link: The clock Tegra provides to the ULPI PHY (usually pad DAP_MCLK2
-     with pad group aka "nvidia,pins" cdev2 and pin mux option config aka
-     "nvidia,function" pllp_out4).
-     Present if phy_type == ulpi, and ULPI link mode is in use.
- - resets : Must contain an entry for each entry in reset-names.
-   See ../reset/reset.txt for details.
- - reset-names : Must include the following entries:
-   - usb: The PHY's own reset signal.
-   - utmi-pads: The reset of the PHY containing the chip-wide UTMI pad control
-     registers. Required even if phy_type == ulpi.
-
-Required properties for phy_type == ulpi:
-  - nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
-
-Required PHY timing params for utmi phy, for all chips:
-  - nvidia,hssync-start-delay : Number of 480 Mhz clock cycles to wait before
-    start of sync launches RxActive
-  - nvidia,elastic-limit : Variable FIFO Depth of elastic input store
-  - nvidia,idle-wait-delay : Number of 480 Mhz clock cycles of idle to wait
-    before declare IDLE.
-  - nvidia,term-range-adj : Range adjusment on terminations
-  - Either one of the following for HS driver output control:
-    - nvidia,xcvr-setup : integer, uses the provided value.
-    - nvidia,xcvr-setup-use-fuses : boolean, indicates that the value is read
-      from the on-chip fuses
-    If both are provided, nvidia,xcvr-setup-use-fuses takes precedence.
-  - nvidia,xcvr-lsfslew : LS falling slew rate control.
-  - nvidia,xcvr-lsrslew :  LS rising slew rate control.
-
-Required PHY timing params for utmi phy, only on Tegra30 and above:
-  - nvidia,xcvr-hsslew : HS slew rate control.
-  - nvidia,hssquelch-level : HS squelch detector level.
-  - nvidia,hsdiscon-level : HS disconnect detector level.
-
-Optional properties:
-  - nvidia,has-legacy-mode : boolean indicates whether this controller can
-    operate in legacy mode (as APX 2500 / 2600). In legacy mode some
-    registers are accessed through the APB_MISC base address instead of
-    the USB controller.
-  - nvidia,is-wired : boolean. Indicates whether we can do certain kind of power
-    optimizations for the devices that are always connected. e.g. modem.
-  - dr_mode : dual role mode. Indicates the working mode for the PHY. Can be
-    "host", "peripheral", or "otg". Defaults to "host" if not defined.
-      host means this is a host controller
-      peripheral means it is device controller
-      otg means it can operate as either ("on the go")
-  - nvidia,has-utmi-pad-registers : boolean indicates whether this controller
-    contains the UTMI pad control registers common to all USB controllers.
-
-VBUS control (required for dr_mode == otg, optional for dr_mode == host):
-  - vbus-supply: regulator for VBUS
diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
new file mode 100644
index 000000000000..d61585c96e31
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
@@ -0,0 +1,373 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nvidia,tegra20-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra USB PHY
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra124-usb-phy
+              - nvidia,tegra114-usb-phy
+          - enum:
+              - nvidia,tegra30-usb-phy
+      - items:
+          - enum:
+              - nvidia,tegra30-usb-phy
+              - nvidia,tegra20-usb-phy
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description: |
+      PHY0 and PHY2 share power and ground, PHY0 contains shared registers.
+      PHY0 and PHY2 must specify two register sets, where the first set is
+      PHY own registers and the second set is the PHY0 registers.
+
+  clocks:
+    anyOf:
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+          - description: ULPI PHY clock
+
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+          - description: UTMI pads control registers clock
+
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+          - description: UTMI timeout clock
+          - description: UTMI pads control registers clock
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: reg
+          - const: pll_u
+
+      - items:
+          - const: reg
+          - const: pll_u
+          - const: ulpi-link
+
+      - items:
+          - const: reg
+          - const: pll_u
+          - const: utmi-pads
+
+      - items:
+          - const: reg
+          - const: pll_u
+          - const: timer
+          - const: utmi-pads
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    oneOf:
+      - maxItems: 1
+        description: PHY reset
+
+      - items:
+          - description: PHY reset
+          - description: UTMI pads reset
+
+  reset-names:
+    oneOf:
+      - const: usb
+
+      - items:
+          - const: usb
+          - const: utmi-pads
+
+  "#phy-cells":
+    const: 0
+
+  phy_type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [utmi, ulpi, hsic]
+
+  dr_mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, peripheral, otg]
+    default: host
+
+  vbus-supply:
+    description: Regulator controlling USB VBUS.
+
+  nvidia,has-legacy-mode:
+    description: |
+      Indicates whether this controller can operate in legacy mode
+      (as APX 2500 / 2600). In legacy mode some registers are accessed
+      through the APB_MISC base address instead of the USB controller.
+    type: boolean
+
+  nvidia,is-wired:
+    description: |
+      Indicates whether we can do certain kind of power optimizations for
+      the devices that are always connected. e.g. modem.
+    type: boolean
+
+  nvidia,has-utmi-pad-registers:
+    description: |
+      Indicates whether this controller contains the UTMI pad control
+      registers common to all USB controllers.
+    type: boolean
+
+  nvidia,hssync-start-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: |
+      Number of 480 MHz clock cycles to wait before start of sync launches
+      RxActive.
+
+  nvidia,elastic-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Variable FIFO Depth of elastic input store.
+
+  nvidia,idle-wait-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: |
+      Number of 480 MHz clock cycles of idle to wait before declare IDLE.
+
+  nvidia,term-range-adj:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description: Range adjustment on terminations.
+
+  nvidia,xcvr-setup:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 127
+    description: Input of XCVR cell, HS driver output control.
+
+  nvidia,xcvr-setup-use-fuses:
+    description: Indicates that the value is read from the on-chip fuses.
+    type: boolean
+
+  nvidia,xcvr-lsfslew:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: LS falling slew rate control.
+
+  nvidia,xcvr-lsrslew:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: LS rising slew rate control.
+
+  nvidia,xcvr-hsslew:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 511
+    description: HS slew rate control.
+
+  nvidia,hssquelch-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: HS squelch detector level.
+
+  nvidia,hsdiscon-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description: HS disconnect detector level.
+
+  nvidia,phy-reset-gpio:
+    maxItems: 1
+    description: GPIO used to reset the PHY.
+
+  nvidia,pmc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to Power Management controller.
+          - description: USB controller ID.
+    description:
+      Phandle to Power Management controller.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#phy-cells"
+  - phy_type
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        phy_type:
+          const: utmi
+
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          maxItems: 2
+
+      required:
+        - nvidia,hssync-start-delay
+        - nvidia,elastic-limit
+        - nvidia,idle-wait-delay
+        - nvidia,term-range-adj
+        - nvidia,xcvr-lsfslew
+        - nvidia,xcvr-lsrslew
+
+      anyOf:
+        - required: ["nvidia,xcvr-setup"]
+        - required: ["nvidia,xcvr-setup-use-fuses"]
+
+      if:
+        properties:
+          compatible:
+            contains:
+              const: nvidia,tegra30-usb-phy
+
+      then:
+        properties:
+          clocks:
+            maxItems: 3
+
+          clock-names:
+            items:
+              - const: reg
+              - const: pll_u
+              - const: utmi-pads
+
+        required:
+          - nvidia,xcvr-hsslew
+          - nvidia,hssquelch-level
+          - nvidia,hsdiscon-level
+
+      else:
+        properties:
+          clocks:
+            maxItems: 4
+
+          clock-names:
+            items:
+              - const: reg
+              - const: pll_u
+              - const: timer
+              - const: utmi-pads
+
+  - if:
+      properties:
+        phy_type:
+          const: ulpi
+
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 1
+
+        clocks:
+          minItems: 2
+          maxItems: 3
+
+        clock-names:
+          minItems: 2
+          maxItems: 3
+
+          oneOf:
+            - items:
+                - const: reg
+                - const: pll_u
+
+            - items:
+                - const: reg
+                - const: pll_u
+                - const: ulpi-link
+
+        resets:
+          minItems: 1
+          maxItems: 2
+
+        reset-names:
+          minItems: 1
+          maxItems: 2
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+
+    usb-phy@7d008000 {
+        compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+        reg = <0x7d008000 0x4000>,
+              <0x7d000000 0x4000>;
+        interrupts = <0 97 4>;
+        phy_type = "utmi";
+        clocks = <&tegra_car TEGRA124_CLK_USB3>,
+                 <&tegra_car TEGRA124_CLK_PLL_U>,
+                 <&tegra_car TEGRA124_CLK_USBD>;
+        clock-names = "reg", "pll_u", "utmi-pads";
+        resets = <&tegra_car 59>, <&tegra_car 22>;
+        reset-names = "usb", "utmi-pads";
+        #phy-cells = <0>;
+        nvidia,hssync-start-delay = <0>;
+        nvidia,idle-wait-delay = <17>;
+        nvidia,elastic-limit = <16>;
+        nvidia,term-range-adj = <6>;
+        nvidia,xcvr-setup = <9>;
+        nvidia,xcvr-lsfslew = <0>;
+        nvidia,xcvr-lsrslew = <3>;
+        nvidia,hssquelch-level = <2>;
+        nvidia,hsdiscon-level = <5>;
+        nvidia,xcvr-hsslew = <12>;
+        nvidia,pmc = <&tegra_pmc 2>;
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    usb-phy@c5004000 {
+        compatible = "nvidia,tegra20-usb-phy";
+        reg = <0xc5004000 0x4000>;
+        interrupts = <0 21 4>;
+        phy_type = "ulpi";
+        clocks = <&tegra_car TEGRA20_CLK_USB2>,
+                 <&tegra_car TEGRA20_CLK_PLL_U>,
+                 <&tegra_car TEGRA20_CLK_CDEV2>;
+        clock-names = "reg", "pll_u", "ulpi-link";
+        resets = <&tegra_car 58>, <&tegra_car 22>;
+        reset-names = "usb", "utmi-pads";
+        #phy-cells = <0>;
+        nvidia,pmc = <&tegra_pmc 1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
index ad49e5c01334..8b5a7a28a35b 100644
--- a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
@@ -12,6 +12,13 @@ Required properties:
 - #address-cells: should be 1.
 - #size-cells: should be 0.
 
+Optional properties:
+
+- reg-names: must be "comphy" as the first name, and "conf".
+- reg: must contain the comphy register location and length as the first
+    pair, followed by an optional configuration register address and
+    length pair.
+
 A sub-node is required for each comphy lane provided by the comphy.
 
 Required properties (child nodes):
@@ -24,7 +31,8 @@ Example:
 
 	comphy: phy@18300 {
 		compatible = "marvell,armada-380-comphy";
-		reg = <0x18300 0x100>;
+		reg-names = "comphy", "conf";
+		reg = <0x18300 0x100>, <0x18460 4>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt b/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
deleted file mode 100644
index 7f49fd54ebc1..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Cadence MHDP DisplayPort SD0801 PHY binding
-===========================================
-
-This binding describes the Cadence SD0801 PHY hardware included with
-the Cadence MHDP DisplayPort controller.
-
--------------------------------------------------------------------------------
-Required properties (controller (parent) node):
-- compatible	: Should be "cdns,dp-phy"
-- reg		: Defines the following sets of registers in the parent
-		  mhdp device:
-			- Offset of the DPTX PHY configuration registers
-			- Offset of the SD0801 PHY configuration registers
-- #phy-cells	: from the generic PHY bindings, must be 0.
-
-Optional properties:
-- num_lanes	: Number of DisplayPort lanes to use (1, 2 or 4)
-- max_bit_rate	: Maximum DisplayPort link bit rate to use, in Mbps (2160,
-		  2430, 2700, 3240, 4320, 5400 or 8100)
--------------------------------------------------------------------------------
-
-Example:
-	dp_phy: phy@f0fb030a00 {
-		compatible = "cdns,dp-phy";
-		reg = <0xf0 0xfb030a00 0x0 0x00000040>,
-		      <0xf0 0xfb500000 0x0 0x00100000>;
-		num_lanes = <4>;
-		max_bit_rate = <8100>;
-		#phy-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
deleted file mode 100644
index 03f5939d3d19..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-Cadence Sierra PHY
------------------------
-
-Required properties:
-- compatible:	Must be "cdns,sierra-phy-t0" for Sierra in Cadence platform
-		Must be "ti,sierra-phy-t0" for Sierra in TI's J721E SoC.
-- resets:	Must contain an entry for each in reset-names.
-		See ../reset/reset.txt for details.
-- reset-names:	Must include "sierra_reset" and "sierra_apb".
-		"sierra_reset" must control the reset line to the PHY.
-		"sierra_apb" must control the reset line to the APB PHY
-		interface ("sierra_apb" is optional).
-- reg:		register range for the PHY.
-- #address-cells: Must be 1
-- #size-cells:	Must be 0
-
-Optional properties:
-- clocks:		Must contain an entry in clock-names.
-			See ../clocks/clock-bindings.txt for details.
-- clock-names:		Must contain "cmn_refclk_dig_div" and
-			"cmn_refclk1_dig_div" for configuring the frequency of
-			the clock to the lanes. "phy_clk" is deprecated.
-- cdns,autoconf:	A boolean property whose presence indicates that the
-			PHY registers will be configured by hardware. If not
-			present, all sub-node optional properties must be
-			provided.
-
-Sub-nodes:
-  Each group of PHY lanes with a single master lane should be represented as
-  a sub-node. Note that the actual configuration of each lane is determined by
-  hardware strapping, and must match the configuration specified here.
-
-Sub-node required properties:
-- #phy-cells:	Generic PHY binding; must be 0.
-- reg:		The master lane number.  This is the lowest numbered lane
-		in the lane group.
-- resets:	Must contain one entry which controls the reset line for the
-		master lane of the sub-node.
-		See ../reset/reset.txt for details.
-
-Sub-node optional properties:
-- cdns,num-lanes:	Number of lanes in this group.  From 1 to 4.  The
-			group is made up of consecutive lanes.
-- cdns,phy-type:	Can be PHY_TYPE_PCIE or PHY_TYPE_USB3, depending on
-			configuration of lanes.
-
-Example:
-	pcie_phy4: pcie-phy@fd240000 {
-		compatible = "cdns,sierra-phy-t0";
-		reg = <0x0 0xfd240000 0x0 0x40000>;
-		resets = <&phyrst 0>, <&phyrst 1>;
-		reset-names = "sierra_reset", "sierra_apb";
-		clocks = <&phyclock>;
-		clock-names = "phy_clk";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pcie0_phy0: pcie-phy@0 {
-				reg = <0>;
-				resets = <&phyrst 2>;
-				cdns,num-lanes = <2>;
-				#phy-cells = <0>;
-				cdns,phy-type = <PHY_TYPE_PCIE>;
-		};
-		pcie0_phy1: pcie-phy@2 {
-				reg = <2>;
-				resets = <&phyrst 4>;
-				cdns,num-lanes = <1>;
-				#phy-cells = <0>;
-				cdns,phy-type = <PHY_TYPE_PCIE>;
-		};
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
new file mode 100644
index 000000000000..a9e227d8b076
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/phy-cadence-sierra.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence Sierra PHY binding
+
+description:
+  This binding describes the Cadence Sierra PHY. Sierra PHY supports multilink
+  multiprotocol combinations including protocols such as PCIe, USB etc.
+
+maintainers:
+  - Swapnil Jakhade <sjakhade@cadence.com>
+  - Yuti Amonkar <yamonkar@cadence.com>
+
+properties:
+  compatible:
+    enum:
+      - cdns,sierra-phy-t0
+      - ti,sierra-phy-t0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 1
+
+  resets:
+    minItems: 1
+    items:
+      - description: Sierra PHY reset.
+      - description: Sierra APB reset. This is optional.
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: sierra_reset
+      - const: sierra_apb
+
+  reg:
+    maxItems: 1
+    description:
+      Offset of the Sierra PHY configuration registers.
+
+  reg-names:
+    const: serdes
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: cmn_refclk_dig_div
+      - const: cmn_refclk1_dig_div
+      - const: pll0_refclk
+      - const: pll1_refclk
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 2
+
+  cdns,autoconf:
+    type: boolean
+    description:
+      A boolean property whose presence indicates that the PHY registers will be
+      configured by hardware. If not present, all sub-node optional properties
+      must be provided.
+
+patternProperties:
+  '^phy@[0-9a-f]$':
+    type: object
+    description:
+      Each group of PHY lanes with a single master lane should be represented as
+      a sub-node. Note that the actual configuration of each lane is determined
+      by hardware strapping, and must match the configuration specified here.
+    properties:
+      reg:
+        description:
+          The master lane number. This is the lowest numbered lane in the lane group.
+        minimum: 0
+        maximum: 15
+
+      resets:
+        minItems: 1
+        maxItems: 4
+        description:
+          Contains list of resets, one per lane, to get all the link lanes out of reset.
+
+      "#phy-cells":
+        const: 0
+
+      cdns,phy-type:
+        description:
+          Specifies the type of PHY for which the group of PHY lanes is used.
+          Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [2, 4]
+
+      cdns,num-lanes:
+        description:
+          Number of lanes in this group. The group is made up of consecutive lanes.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 16
+
+      cdns,ssc-mode:
+        description:
+          Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
+          EXTERNAL_SSC or INTERNAL_SSC.
+          Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 1
+
+    required:
+      - reg
+      - resets
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sierra-phy@fd240000 {
+            compatible = "cdns,sierra-phy-t0";
+            reg = <0x0 0xfd240000 0x0 0x40000>;
+            resets = <&phyrst 0>, <&phyrst 1>;
+            reset-names = "sierra_reset", "sierra_apb";
+            clocks = <&cmn_refclk_dig_div>, <&cmn_refclk1_dig_div>;
+            clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            pcie0_phy0: phy@0 {
+                reg = <0>;
+                resets = <&phyrst 2>;
+                cdns,num-lanes = <2>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_PCIE>;
+            };
+            pcie0_phy1: phy@2 {
+                reg = <2>;
+                resets = <&phyrst 4>;
+                cdns,num-lanes = <1>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_PCIE>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
new file mode 100644
index 000000000000..2fec9e54ad0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence Torrent SD0801 PHY binding
+
+description:
+  This binding describes the Cadence SD0801 PHY (also known as Torrent PHY)
+  hardware included with the Cadence MHDP DisplayPort controller. Torrent
+  PHY also supports multilink multiprotocol combinations including protocols
+  such as PCIe, USB, SGMII, QSGMII etc.
+
+maintainers:
+  - Swapnil Jakhade <sjakhade@cadence.com>
+  - Yuti Amonkar <yamonkar@cadence.com>
+
+properties:
+  compatible:
+    enum:
+      - cdns,torrent-phy
+      - ti,j721e-serdes-10g
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    description:
+      PHY reference clock for 1 item. Must contain an entry in clock-names.
+      Optional Parent to enable output reference clock.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: refclk
+      - const: phy_en_refclk
+
+  assigned-clocks:
+    maxItems: 3
+
+  assigned-clock-parents:
+    maxItems: 3
+
+  reg:
+    minItems: 1
+    items:
+      - description: Offset of the Torrent PHY configuration registers.
+      - description: Offset of the DPTX PHY configuration registers.
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: torrent_phy
+      - const: dptx_phy
+
+  resets:
+    minItems: 1
+    items:
+      - description: Torrent PHY reset.
+      - description: Torrent APB reset. This is optional.
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: torrent_reset
+      - const: torrent_apb
+
+patternProperties:
+  '^phy@[0-3]$':
+    type: object
+    description:
+      Each group of PHY lanes with a single master lane should be represented as a sub-node.
+    properties:
+      reg:
+        description:
+          The master lane number. This is the lowest numbered lane in the lane group.
+        minimum: 0
+        maximum: 3
+
+      resets:
+        minItems: 1
+        maxItems: 4
+        description:
+          Contains list of resets, one per lane, to get all the link lanes out of reset.
+
+      "#phy-cells":
+        const: 0
+
+      cdns,phy-type:
+        description:
+          Specifies the type of PHY for which the group of PHY lanes is used.
+          Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 9
+
+      cdns,num-lanes:
+        description:
+          Number of lanes.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2, 3, 4]
+        default: 4
+
+      cdns,ssc-mode:
+        description:
+          Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
+          EXTERNAL_SSC or INTERNAL_SSC.
+          Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+
+      cdns,max-bit-rate:
+        description:
+          Maximum DisplayPort link bit rate to use, in Mbps
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
+        default: 8100
+
+    required:
+      - reg
+      - resets
+      - "#phy-cells"
+      - cdns,phy-type
+      - cdns,num-lanes
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        torrent-phy@f0fb500000 {
+            compatible = "cdns,torrent-phy";
+            reg = <0xf0 0xfb500000 0x0 0x00100000>,
+                  <0xf0 0xfb030a00 0x0 0x00000040>;
+            reg-names = "torrent_phy", "dptx_phy";
+            resets = <&phyrst 0>;
+            reset-names = "torrent_reset";
+            clocks = <&ref_clk>;
+            clock-names = "refclk";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy@0 {
+                reg = <0>;
+                resets = <&phyrst 1>, <&phyrst 2>,
+                         <&phyrst 3>, <&phyrst 4>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_DP>;
+                cdns,num-lanes = <4>;
+                cdns,max-bit-rate = <8100>;
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/phy/phy-cadence.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        torrent-phy@f0fb500000 {
+            compatible = "cdns,torrent-phy";
+            reg = <0xf0 0xfb500000 0x0 0x00100000>;
+            reg-names = "torrent_phy";
+            resets = <&phyrst 0>, <&phyrst 1>;
+            reset-names = "torrent_reset", "torrent_apb";
+            clocks = <&ref_clk>;
+            clock-names = "refclk";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy@0 {
+                reg = <0>;
+                resets = <&phyrst 2>, <&phyrst 3>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_PCIE>;
+                cdns,num-lanes = <2>;
+                cdns,ssc-mode = <CDNS_SERDES_NO_SSC>;
+            };
+
+            phy@2 {
+                reg = <2>;
+                resets = <&phyrst 4>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_SGMII>;
+                cdns,num-lanes = <1>;
+                cdns,ssc-mode = <CDNS_SERDES_NO_SSC>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
deleted file mode 100644
index e88ba7d92dcb..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Hisilicon hi3660 USB PHY
------------------------
-
-Required properties:
-- compatible: should be "hisilicon,hi3660-usb-phy"
-- #phy-cells: must be 0
-- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
-- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
-- hisilicon,eye-diagram-param: parameter set for phy
-Refer to phy/phy-bindings.txt for the generic PHY binding properties
-
-This is a subnode of usb3_otg_bc register node.
-
-Example:
-	usb3_otg_bc: usb3_otg_bc@ff200000 {
-		compatible = "syscon", "simple-mfd";
-		reg = <0x0 0xff200000 0x0 0x1000>;
-
-		usb-phy {
-			compatible = "hisilicon,hi3660-usb-phy";
-			#phy-cells = <0>;
-			hisilicon,pericrg-syscon = <&crg_ctrl>;
-			hisilicon,pctrl-syscon = <&pctrl>;
-			hisilicon,eye-diagram-param = <0x22466e4>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt
deleted file mode 100644
index 7183b9102f91..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Marvell MMP3 USB PHY
---------------------
-
-Required properties:
-- compatible: must be "marvell,mmp3-usb-phy"
-- #phy-cells: must be 0
-
-Example:
-	usb-phy: usb-phy@d4207000 {
-		compatible = "marvell,mmp3-usb-phy";
-		reg = <0xd4207000 0x40>;
-		#phy-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
deleted file mode 100644
index a5f7a4f0dbc1..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
+++ /dev/null
@@ -1,150 +0,0 @@
-MediaTek T-PHY binding
---------------------------
-
-T-phy controller supports physical layer functionality for a number of
-controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA.
-
-Required properties (controller (parent) node):
- - compatible	: should be one of
-		  "mediatek,generic-tphy-v1"
-		  "mediatek,generic-tphy-v2"
-		  "mediatek,mt2701-u3phy" (deprecated)
-		  "mediatek,mt2712-u3phy" (deprecated)
-		  "mediatek,mt8173-u3phy";
-		  make use of "mediatek,generic-tphy-v1" on mt2701 instead and
-		  "mediatek,generic-tphy-v2" on mt2712 instead.
- - clocks	: (deprecated, use port's clocks instead) a list of phandle +
-		  clock-specifier pairs, one for each entry in clock-names
- - clock-names	: (deprecated, use port's one instead) must contain
-		  "u3phya_ref": for reference clock of usb3.0 analog phy.
-
-Required nodes	: a sub-node is required for each port the controller
-		  provides. Address range information including the usual
-		  'reg' property is used inside these nodes to describe
-		  the controller's topology.
-
-Optional properties (controller (parent) node):
- - reg		: offset and length of register shared by multiple ports,
-		  exclude port's private register. It is needed on mt2701
-		  and mt8173, but not on mt2712.
- - mediatek,src-ref-clk-mhz	: frequency of reference clock for slew rate
-		  calibrate
- - mediatek,src-coef	: coefficient for slew rate calibrate, depends on
-		  SoC process
-
-Required properties (port (child) node):
-- reg		: address and length of the register set for the port.
-- clocks	: a list of phandle + clock-specifier pairs, one for each
-		  entry in clock-names
-- clock-names	: must contain
-		  "ref": 48M reference clock for HighSpeed analog phy; and 26M
-			reference clock for SuperSpeed analog phy, sometimes is
-			24M, 25M or 27M, depended on platform.
-- #phy-cells	: should be 1 (See second example)
-		  cell after port phandle is phy type from:
-			- PHY_TYPE_USB2
-			- PHY_TYPE_USB3
-			- PHY_TYPE_PCIE
-			- PHY_TYPE_SATA
-
-Optional properties (PHY_TYPE_USB2 port (child) node):
-- mediatek,eye-src	: u32, the value of slew rate calibrate
-- mediatek,eye-vrt	: u32, the selection of VRT reference voltage
-- mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
-- mediatek,bc12	: bool, enable BC12 of u2phy if support it
-
-Example:
-
-u3phy: usb-phy@11290000 {
-	compatible = "mediatek,mt8173-u3phy";
-	reg = <0 0x11290000 0 0x800>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-
-	u2port0: usb-phy@11290800 {
-		reg = <0 0x11290800 0 0x100>;
-		clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
-		clock-names = "ref";
-		#phy-cells = <1>;
-	};
-
-	u3port0: usb-phy@11290900 {
-		reg = <0 0x11290800 0 0x700>;
-		clocks = <&clk26m>;
-		clock-names = "ref";
-		#phy-cells = <1>;
-	};
-
-	u2port1: usb-phy@11291000 {
-		reg = <0 0x11291000 0 0x100>;
-		clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
-		clock-names = "ref";
-		#phy-cells = <1>;
-	};
-};
-
-Specifying phy control of devices
----------------------------------
-
-Device nodes should specify the configuration required in their "phys"
-property, containing a phandle to the phy port node and a device type;
-phy-names for each port are optional.
-
-Example:
-
-#include <dt-bindings/phy/phy.h>
-
-usb30: usb@11270000 {
-	...
-	phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
-	phy-names = "usb2-0", "usb3-0";
-	...
-};
-
-
-Layout differences of banks between mt8173/mt2701 and mt2712
--------------------------------------------------------------
-mt8173 and mt2701:
-port        offset    bank
-shared      0x0000    SPLLC
-            0x0100    FMREG
-u2 port0    0x0800    U2PHY_COM
-u3 port0    0x0900    U3PHYD
-            0x0a00    U3PHYD_BANK2
-            0x0b00    U3PHYA
-            0x0c00    U3PHYA_DA
-u2 port1    0x1000    U2PHY_COM
-u3 port1    0x1100    U3PHYD
-            0x1200    U3PHYD_BANK2
-            0x1300    U3PHYA
-            0x1400    U3PHYA_DA
-u2 port2    0x1800    U2PHY_COM
-            ...
-
-mt2712:
-port        offset    bank
-u2 port0    0x0000    MISC
-            0x0100    FMREG
-            0x0300    U2PHY_COM
-u3 port0    0x0700    SPLLC
-            0x0800    CHIP
-            0x0900    U3PHYD
-            0x0a00    U3PHYD_BANK2
-            0x0b00    U3PHYA
-            0x0c00    U3PHYA_DA
-u2 port1    0x1000    MISC
-            0x1100    FMREG
-            0x1300    U2PHY_COM
-u3 port1    0x1700    SPLLC
-            0x1800    CHIP
-            0x1900    U3PHYD
-            0x1a00    U3PHYD_BANK2
-            0x1b00    U3PHYA
-            0x1c00    U3PHYA_DA
-u2 port2    0x2000    MISC
-            ...
-
-    SPLLC shared by u3 ports and FMREG shared by u2 ports on
-mt8173/mt2701 are put back into each port; a new bank MISC for
-u2 ports and CHIP for u3 ports are added on mt2712.
diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt b/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt
deleted file mode 100644
index 5789029a1d42..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-MediaTek Universal Flash Storage (UFS) M-PHY binding
---------------------------------------------------------
-
-UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro.
-Each UFS M-PHY node should have its own node.
-
-To bind UFS M-PHY with UFS host controller, the controller node should
-contain a phandle reference to UFS M-PHY node.
-
-Required properties for UFS M-PHY nodes:
-- compatible         : Compatible list, contains the following controller:
-                       "mediatek,mt8183-ufsphy" for ufs phy
-                       persent on MT81xx chipsets.
-- reg                : Address and length of the UFS M-PHY register set.
-- #phy-cells         : This property shall be set to 0.
-- clocks             : List of phandle and clock specifier pairs.
-- clock-names        : List of clock input name strings sorted in the same
-                       order as the clocks property. Following clocks are
-                       mandatory.
-                       "unipro": Unipro core control clock.
-                       "mp": M-PHY core control clock.
-
-Example:
-
-	ufsphy: phy@11fa0000 {
-		compatible = "mediatek,mt8183-ufsphy";
-		reg = <0 0x11fa0000 0 0xc000>;
-		#phy-cells = <0>;
-
-		clocks = <&infracfg_ao INFRACFG_AO_UNIPRO_SCK_CG>,
-			 <&infracfg_ao INFRACFG_AO_UFS_MP_SAP_BCLK_CG>;
-		clock-names = "unipro", "mp";
-	};
-
-	ufshci@11270000 {
-		...
-		phys = <&ufsphy>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt
deleted file mode 100644
index e7caefa0b9c2..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt
+++ /dev/null
@@ -1,109 +0,0 @@
-MediaTek XS-PHY binding
---------------------------
-
-The XS-PHY controller supports physical layer functionality for USB3.1
-GEN2 controller on MediaTek SoCs.
-
-Required properties (controller (parent) node):
- - compatible	: should be "mediatek,<soc-model>-xsphy", "mediatek,xsphy",
-		  soc-model is the name of SoC, such as mt3611 etc;
-		  when using "mediatek,xsphy" compatible string, you need SoC specific
-		  ones in addition, one of:
-		  - "mediatek,mt3611-xsphy"
-
- - #address-cells, #size-cells : should use the same values as the root node
- - ranges: must be present
-
-Optional properties (controller (parent) node):
- - reg		: offset and length of register shared by multiple U3 ports,
-		  exclude port's private register, if only U2 ports provided,
-		  shouldn't use the property.
- - mediatek,src-ref-clk-mhz	: u32, frequency of reference clock for slew rate
-		  calibrate
- - mediatek,src-coef	: u32, coefficient for slew rate calibrate, depends on
-		  SoC process
-
-Required nodes	: a sub-node is required for each port the controller
-		  provides. Address range information including the usual
-		  'reg' property is used inside these nodes to describe
-		  the controller's topology.
-
-Required properties (port (child) node):
-- reg		: address and length of the register set for the port.
-- clocks	: a list of phandle + clock-specifier pairs, one for each
-		  entry in clock-names
-- clock-names	: must contain
-		  "ref": 48M reference clock for HighSpeed analog phy; and 26M
-			reference clock for SuperSpeedPlus analog phy, sometimes is
-			24M, 25M or 27M, depended on platform.
-- #phy-cells	: should be 1
-		  cell after port phandle is phy type from:
-			- PHY_TYPE_USB2
-			- PHY_TYPE_USB3
-
-The following optional properties are only for debug or HQA test
-Optional properties (PHY_TYPE_USB2 port (child) node):
-- mediatek,eye-src	: u32, the value of slew rate calibrate
-- mediatek,eye-vrt	: u32, the selection of VRT reference voltage
-- mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
-- mediatek,efuse-intr	: u32, the selection of Internal Resistor
-
-Optional properties (PHY_TYPE_USB3 port (child) node):
-- mediatek,efuse-intr	: u32, the selection of Internal Resistor
-- mediatek,efuse-tx-imp	: u32, the selection of TX Impedance
-- mediatek,efuse-rx-imp	: u32, the selection of RX Impedance
-
-Banks layout of xsphy
--------------------------------------------------------------
-port        offset    bank
-u2 port0    0x0000    MISC
-            0x0100    FMREG
-            0x0300    U2PHY_COM
-u2 port1    0x1000    MISC
-            0x1100    FMREG
-            0x1300    U2PHY_COM
-u2 port2    0x2000    MISC
-            ...
-u31 common  0x3000    DIG_GLB
-            0x3100    PHYA_GLB
-u31 port0   0x3400    DIG_LN_TOP
-            0x3500    DIG_LN_TX0
-            0x3600    DIG_LN_RX0
-            0x3700    DIG_LN_DAIF
-            0x3800    PHYA_LN
-u31 port1   0x3a00    DIG_LN_TOP
-            0x3b00    DIG_LN_TX0
-            0x3c00    DIG_LN_RX0
-            0x3d00    DIG_LN_DAIF
-            0x3e00    PHYA_LN
-            ...
-
-DIG_GLB & PHYA_GLB are shared by U31 ports.
-
-Example:
-
-u3phy: usb-phy@11c40000 {
-	compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy";
-	reg = <0 0x11c43000 0 0x0200>;
-	mediatek,src-ref-clk-mhz = <26>;
-	mediatek,src-coef = <17>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-
-	u2port0: usb-phy@11c40000 {
-		reg = <0 0x11c40000 0 0x0400>;
-		clocks = <&clk48m>;
-		clock-names = "ref";
-		mediatek,eye-src = <4>;
-		#phy-cells = <1>;
-	};
-
-	u3port0: usb-phy@11c43000 {
-		reg = <0 0x11c43400 0 0x0500>;
-		clocks = <&clk26m>;
-		clock-names = "ref";
-		mediatek,efuse-intr = <28>;
-		#phy-cells = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
index 8c60e6985950..5ffd0f55d010 100644
--- a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
@@ -42,22 +42,22 @@ Required properties (child nodes):
 
 Examples:
 
-	cpm_comphy: phy@120000 {
+	CP11X_LABEL(comphy): phy@120000 {
 		compatible = "marvell,comphy-cp110";
 		reg = <0x120000 0x6000>;
-		marvell,system-controller = <&cpm_syscon0>;
-		clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
-			 <&CP110_LABEL(clk) 1 18>;
+		marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+		clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
+			 <&CP11X_LABEL(clk) 1 18>;
 		clock-names = "mg_clk", "mg_core_clk", "axi_clk";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpm_comphy0: phy@0 {
+		CP11X_LABEL(comphy0): phy@0 {
 			reg = <0>;
 			#phy-cells = <1>;
 		};
 
-		cpm_comphy1: phy@1 {
+		CP11X_LABEL(comphy1): phy@1 {
 			reg = <1>;
 			#phy-cells = <1>;
 		};
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
deleted file mode 100644
index aa99ceec73b0..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-MVEBU A3700 UTMI PHY
---------------------
-
-USB2 UTMI+ PHY controllers can be found on the following Marvell MVEBU SoCs:
-* Armada 3700
-
-On Armada 3700, there are two USB controllers, one is compatible with the USB2
-and USB3 specifications and supports OTG. The other one is USB2 compliant and
-only supports host mode. Both of these controllers come with a slightly
-different UTMI PHY.
-
-Required Properties:
-
-- compatible: Should be one of:
-	      * "marvell,a3700-utmi-host-phy" for the PHY connected to
-	        the USB2 host-only controller.
-	      * "marvell,a3700-utmi-otg-phy" for the PHY connected to
-	        the USB3 and USB2 OTG capable controller.
-- reg: PHY IP register range.
-- marvell,usb-misc-reg: handle on the "USB miscellaneous registers" shared
-			region covering registers related to both the host
-			controller and the PHY.
-- #phy-cells: Standard property (Documentation: phy-bindings.txt) Should be 0.
-
-
-Example:
-
-	usb2_utmi_host_phy: phy@5f000 {
-		compatible = "marvell,armada-3700-utmi-host-phy";
-		reg = <0x5f000 0x800>;
-		marvell,usb-misc-reg = <&usb2_syscon>;
-		#phy-cells = <0>;
-	};
-
-	usb2_syscon: system-controller@5f800 {
-		compatible = "marvell,armada-3700-usb2-host-misc", "syscon";
-		reg = <0x5f800 0x800>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt
deleted file mode 100644
index 332219860187..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Microsemi Ocelot SerDes muxing driver
--------------------------------------
-
-On Microsemi Ocelot, there is a handful of registers in HSIO address
-space for setting up the SerDes to switch port muxing.
-
-A SerDes X can be "muxed" to work with switch port Y or Z for example.
-One specific SerDes can also be used as a PCIe interface.
-
-Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one.
-
-There are two kinds of SerDes: SERDES1G supports 10/100Mbps in
-half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports
-10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode.
-
-Also, SERDES6G number (aka "macro") 0 is the only interface supporting
-QSGMII.
-
-This is a child of the HSIO syscon ("mscc,ocelot-hsio", see
-Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot.
-
-Required properties:
-
-- compatible: should be "mscc,vsc7514-serdes"
-- #phy-cells : from the generic phy bindings, must be 2.
-	       The first number defines the input port to use for a given
-	       SerDes macro. The second defines the macro to use. They are
-	       defined in dt-bindings/phy/phy-ocelot-serdes.h
-
-Example:
-
-	serdes: serdes {
-		compatible = "mscc,vsc7514-serdes";
-		#phy-cells = <2>;
-	};
-
-	ethernet {
-		port1 {
-			phy-handle = <&phy_foo>;
-			/* Link SERDES1G_5 to port1 */
-			phys = <&serdes 1 SERDES1G_5>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
deleted file mode 100644
index 541f5298827c..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
-
-Required properties (phy (parent) node):
- - compatible : should be one of the listed compatibles:
-	* "rockchip,px30-usb2phy"
-	* "rockchip,rk3228-usb2phy"
-	* "rockchip,rk3328-usb2phy"
-	* "rockchip,rk3366-usb2phy"
-	* "rockchip,rk3399-usb2phy"
-	* "rockchip,rv1108-usb2phy"
- - reg : the address offset of grf for usb-phy configuration.
- - #clock-cells : should be 0.
- - clock-output-names : specify the 480m output clock name.
-
-Optional properties:
- - clocks : phandle + phy specifier pair, for the input clock of phy.
- - clock-names : input clock name of phy, must be "phyclk".
- - assigned-clocks : phandle of usb 480m clock.
- - assigned-clock-parents : parent of usb 480m clock, select between
-		 usb-phy output 480m and xin24m.
-		 Refer to clk/clock-bindings.txt for generic clock
-		 consumer properties.
- - rockchip,usbgrf : phandle to the syscon managing the "usb general
-		 register files". When set driver will request its
-		 phandle as one companion-grf for some special SoCs
-		 (e.g RV1108).
- - extcon : phandle to the extcon device providing the cable state for
-		 the otg phy.
-
-Required nodes : a sub-node is required for each port the phy provides.
-		 The sub-node name is used to identify host or otg port,
-		 and shall be the following entries:
-	* "otg-port" : the name of otg port.
-	* "host-port" : the name of host port.
-
-Required properties (port (child) node):
- - #phy-cells : must be 0. See ./phy-bindings.txt for details.
- - interrupts : specify an interrupt for each entry in interrupt-names.
- - interrupt-names : a list which should be one of the following cases:
-	Regular case:
-	* "otg-id" : for the otg id interrupt.
-	* "otg-bvalid" : for the otg vbus interrupt.
-	* "linestate" : for the host/otg linestate interrupt.
-	Some SoCs use one interrupt with the above muxed together, so for these
-	* "otg-mux" : otg-port interrupt, which mux otg-id/otg-bvalid/linestate
-		to one.
-
-Optional properties:
- - phy-supply : phandle to a regulator that provides power to VBUS.
-		See ./phy-bindings.txt for details.
-
-Example:
-
-grf: syscon@ff770000 {
-	compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-...
-
-	u2phy: usb2-phy@700 {
-		compatible = "rockchip,rk3366-usb2phy";
-		reg = <0x700 0x2c>;
-		#clock-cells = <0>;
-		clock-output-names = "sclk_otgphy0_480m";
-
-		u2phy_otg: otg-port {
-			#phy-cells = <0>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "otg-id", "otg-bvalid", "linestate";
-		};
-
-		u2phy_host: host-port {
-			#phy-cells = <0>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "linestate";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
new file mode 100644
index 000000000000..f71920082fa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-inno-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USB2.0 phy with inno IP block
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-usb2phy
+      - rockchip,rk3128-usb2phy
+      - rockchip,rk3228-usb2phy
+      - rockchip,rk3308-usb2phy
+      - rockchip,rk3328-usb2phy
+      - rockchip,rk3366-usb2phy
+      - rockchip,rk3399-usb2phy
+      - rockchip,rk3568-usb2phy
+      - rockchip,rv1108-usb2phy
+
+  reg:
+    maxItems: 1
+
+  clock-output-names:
+    description:
+      The usb 480m output clock name.
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: phyclk
+
+  assigned-clocks:
+    description:
+      Phandle of the usb 480m clock.
+
+  assigned-clock-parents:
+    description:
+      Parent of the usb 480m clock.
+      Select between usb-phy output 480m and xin24m.
+      Refer to clk/clock-bindings.txt for generic clock consumer properties.
+
+  extcon:
+    description:
+      Phandle to the extcon device providing the cable state for the otg phy.
+
+  interrupts:
+    description: Muxed interrupt for both ports
+    maxItems: 1
+
+  rockchip,usbgrf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the 'usb general register files'.
+      When set the driver will request its phandle as one companion-grf
+      for some special SoCs (e.g rv1108).
+
+  host-port:
+    type: object
+    additionalProperties: false
+
+    properties:
+      "#phy-cells":
+        const: 0
+
+      interrupts:
+        description: host linestate interrupt
+        maxItems: 1
+
+      interrupt-names:
+        const: linestate
+
+      phy-supply:
+        description:
+          Phandle to a regulator that provides power to VBUS.
+          See ./phy-bindings.txt for details.
+
+    required:
+      - "#phy-cells"
+
+  otg-port:
+    type: object
+    additionalProperties: false
+
+    properties:
+      "#phy-cells":
+        const: 0
+
+      interrupts:
+        minItems: 1
+        maxItems: 3
+
+      interrupt-names:
+        oneOf:
+          - const: linestate
+          - const: otg-mux
+          - items:
+              - const: otg-bvalid
+              - const: otg-id
+              - const: linestate
+
+      phy-supply:
+        description:
+          Phandle to a regulator that provides power to VBUS.
+          See ./phy-bindings.txt for details.
+
+    required:
+      - "#phy-cells"
+
+required:
+  - compatible
+  - reg
+  - clock-output-names
+  - "#clock-cells"
+  - host-port
+  - otg-port
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-usb2phy
+
+    then:
+      properties:
+        host-port:
+          properties:
+            interrupts: false
+
+        otg-port:
+          properties:
+            interrupts: false
+
+      required:
+        - interrupts
+
+    else:
+      properties:
+        interrupts: false
+
+        host-port:
+          required:
+            - interrupts
+            - interrupt-names
+
+        otg-port:
+          required:
+            - interrupts
+            - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    u2phy0: usb2phy@e450 {
+      compatible = "rockchip,rk3399-usb2phy";
+      reg = <0xe450 0x10>;
+      clocks = <&cru SCLK_USB2PHY0_REF>;
+      clock-names = "phyclk";
+      clock-output-names = "clk_usbphy0_480m";
+      #clock-cells = <0>;
+
+      u2phy0_host: host-port {
+        interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "linestate";
+        #phy-cells = <0>;
+      };
+
+      u2phy0_otg: otg-port {
+        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "otg-bvalid", "otg-id", "linestate";
+        #phy-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
new file mode 100644
index 000000000000..8d8698412de0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-naneng-combphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC Naneng Combo Phy
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-naneng-combphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: reference clock
+      - description: apb clock
+      - description: pipe clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: apb
+      - const: pipe
+
+  resets:
+    items:
+      - description: exclusive PHY reset line
+
+  rockchip,enable-ssc:
+    type: boolean
+    description:
+      The option SSC can be enabled for U3, SATA and PCIE.
+      Most commercially available platforms use SSC to reduce EMI.
+
+  rockchip,ext-refclk:
+    type: boolean
+    description:
+      Many PCIe connections, especially backplane connections,
+      require a synchronous reference clock between the two link partners.
+      To achieve this a common clock source, referred to as REFCLK in
+      the PCI Express Card Electromechanical Specification,
+      should be used by both ends of the PCIe link.
+      In PCIe mode one can choose to use an internal or an external reference
+      clock.
+      By default the internal clock is selected. The PCIe PHY provides a 100MHz
+      differential clock output(optional with SSC) for system applications.
+      When selecting this option an externally 100MHz differential
+      reference clock needs to be provided to the PCIe PHY.
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional phy settings are accessed through GRF regs.
+
+  rockchip,pipe-phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional pipe settings are accessed through GRF regs.
+
+  "#phy-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - rockchip,pipe-grf
+  - rockchip,pipe-phy-grf
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+
+    pipegrf: syscon@fdc50000 {
+      compatible = "rockchip,rk3568-pipe-grf", "syscon";
+      reg = <0xfdc50000 0x1000>;
+    };
+
+    pipe_phy_grf0: syscon@fdc70000 {
+      compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+      reg = <0xfdc70000 0x1000>;
+    };
+
+    combphy0: phy@fe820000 {
+      compatible = "rockchip,rk3568-naneng-combphy";
+      reg = <0xfe820000 0x100>;
+      clocks = <&pmucru CLK_PCIEPHY0_REF>,
+               <&cru PCLK_PIPEPHY0>,
+               <&cru PCLK_PIPE>;
+      clock-names = "ref", "apb", "pipe";
+      assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+      assigned-clock-rates = <100000000>;
+      resets = <&cru SRST_PIPEPHY0>;
+      rockchip,pipe-grf = <&pipegrf>;
+      rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+      #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
index de6a706abcdb..35f03df00130 100644
--- a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
@@ -9,7 +9,7 @@ Required properties:
 - resets		: list of phandle and reset specifier pairs. There should be two entries, one
 			  for the whole phy and one for the port
 - reset-names		: list of reset signal names. Should be "global" and "port"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
diff --git a/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt
deleted file mode 100644
index 744b4809542e..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-STMicroelectronics STiH41x USB PHY binding
-------------------------------------------
-
-This file contains documentation for the usb phy found in STiH415/6 SoCs from
-STMicroelectronics.
-
-Required properties:
-- compatible	: should be "st,stih416-usb-phy" or "st,stih415-usb-phy"
-- st,syscfg	: should be a phandle of the syscfg node
-- clock-names	: must contain "osc_phy"
-- clocks	: must contain an entry for each name in clock-names.
-See: Documentation/devicetree/bindings/clock/clock-bindings.txt
-- #phy-cells	: must be 0 for this phy
-See: Documentation/devicetree/bindings/phy/phy-bindings.txt
-
-Example:
-
-usb2_phy: usb2phy@0 {
-	compatible	= "st,stih416-usb-phy";
-	#phy-cells	= <0>;
-	st,syscfg	= <&syscfg_rear>;
-	clocks		= <&clk_sysin>;
-	clock-names	= "osc_phy";
-};
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
deleted file mode 100644
index 725ae71ae653..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-STMicroelectronics STM32 USB HS PHY controller
-
-The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
-switch. It controls PHY configuration and status, and the UTMI+ switch that
-selects either OTG or HOST controller for the second PHY port. It also sets
-PLL configuration.
-
-USBPHYC
-      |_ PLL
-      |
-      |_ PHY port#1 _________________ HOST controller
-      |                    _                 |
-      |                  / 1|________________|
-      |_ PHY port#2 ----|   |________________
-      |                  \_0|                |
-      |_ UTMI switch_______|          OTG controller
-
-
-Phy provider node
-=================
-
-Required properties:
-- compatible: must be "st,stm32mp1-usbphyc"
-- reg: address and length of the usb phy control register set
-- clocks: phandle + clock specifier for the PLL phy clock
-- #address-cells: number of address cells for phys sub-nodes, must be <1>
-- #size-cells: number of size cells for phys sub-nodes, must be <0>
-
-Optional properties:
-- assigned-clocks: phandle + clock specifier for the PLL phy clock
-- assigned-clock-parents: the PLL phy clock parent
-- resets: phandle + reset specifier
-
-Required nodes: one sub-node per port the controller provides.
-
-Phy sub-nodes
-==============
-
-Required properties:
-- reg: phy port index
-- phy-supply: phandle to the regulator providing 3V3 power to the PHY,
-	      see phy-bindings.txt in the same directory.
-- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY
-- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
-- #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY
-  port#1 and must be <1> for PHY port#2, to select USB controller
-
-
-Example:
-		usbphyc: usb-phy@5a006000 {
-			compatible = "st,stm32mp1-usbphyc";
-			reg = <0x5a006000 0x1000>;
-			clocks = <&rcc_clk USBPHY_K>;
-			resets = <&rcc_rst USBPHY_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			usbphyc_port0: usb-phy@0 {
-				reg = <0>;
-				phy-supply = <&vdd_usb>;
-				vdda1v1-supply = <&reg11>;
-				vdda1v8-supply = <&reg18>
-				#phy-cells = <0>;
-			};
-
-			usbphyc_port1: usb-phy@1 {
-				reg = <1>;
-				phy-supply = <&vdd_usb>;
-				vdda1v1-supply = <&reg11>;
-				vdda1v8-supply = <&reg18>
-				#phy-cells = <1>;
-			};
-		};
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
new file mode 100644
index 000000000000..801993813b18
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-stm32-usbphyc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 USB HS PHY controller binding
+
+description:
+
+  The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
+  switch. It controls PHY configuration and status, and the UTMI+ switch that
+  selects either OTG or HOST controller for the second PHY port. It also sets
+  PLL configuration.
+
+  USBPHYC
+  |_ PLL
+  |
+  |_ PHY port#1 _________________ HOST controller
+  |                   __                 |
+  |                  / 1|________________|
+  |_ PHY port#2 ----|   |________________
+  |                  \_0|                |
+  |_ UTMI switch_______|          OTG controller
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp1-usbphyc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  vdda1v1-supply:
+    description: regulator providing 1V1 power supply to the PLL block
+
+  vdda1v8-supply:
+    description: regulator providing 1V8 power supply to the PLL block
+
+  '#clock-cells':
+    description: number of clock cells for ck_usbo_48m consumer
+    const: 0
+
+#Required child nodes:
+
+patternProperties:
+  "^usb-phy@[0|1]$":
+    type: object
+    description:
+      Each port the controller provides must be represented as a sub-node.
+
+    properties:
+      reg:
+        description: phy port index.
+        maxItems: 1
+
+      phy-supply:
+        description: regulator providing 3V3 power supply to the PHY.
+
+      "#phy-cells":
+        enum: [ 0x0, 0x1 ]
+
+      connector:
+        type: object
+        $ref: /schemas/connector/usb-connector.yaml
+        unevaluatedProperties: false
+
+        properties:
+          vbus-supply: true
+
+      # It can be necessary to adjust the PHY settings to compensate parasitics, which can be due
+      # to USB connector/receptacle, routing, ESD protection component,... Here is the list of
+      # all optional parameters to tune the interface of the PHY (HS for High-Speed, FS for Full-
+      # Speed, LS for Low-Speed)
+
+      st,current-boost-microamp:
+        description: Current boosting in uA
+        enum: [ 1000, 2000 ]
+
+      st,no-lsfs-fb-cap:
+        description: Disables the LS/FS feedback capacitor
+        type: boolean
+
+      st,decrease-hs-slew-rate:
+        description: Decreases the HS driver slew rate by 10%
+        type: boolean
+
+      st,tune-hs-dc-level:
+        description: |
+          Tunes the HS driver DC level
+          - <0> normal level
+          - <1> increases the level by 5 to 7 mV
+          - <2> increases the level by 10 to 14 mV
+          - <3> decreases the level by 5 to 7 mV
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,enable-fs-rftime-tuning:
+        description: Enables the FS rise/fall tuning option
+        type: boolean
+
+      st,enable-hs-rftime-reduction:
+        description: Enables the HS rise/fall reduction feature
+        type: boolean
+
+      st,trim-hs-current:
+        description: |
+          Controls HS driver current trimming for choke compensation
+          - <0> = 18.87 mA target current / nominal + 0%
+          - <1> = 19.165 mA target current / nominal + 1.56%
+          - <2> = 19.46 mA target current / nominal + 3.12%
+          - <3> = 19.755 mA target current / nominal + 4.68%
+          - <4> = 20.05 mA target current / nominal + 6.24%
+          - <5> = 20.345 mA target current / nominal + 7.8%
+          - <6> = 20.64 mA target current / nominal + 9.36%
+          - <7> = 20.935 mA target current / nominal + 10.92%
+          - <8> = 21.23 mA target current / nominal + 12.48%
+          - <9> = 21.525 mA target current / nominal + 14.04%
+          - <10> = 21.82 mA target current / nominal + 15.6%
+          - <11> = 22.115 mA target current / nominal + 17.16%
+          - <12> = 22.458 mA target current / nominal + 19.01%
+          - <13> = 22.755 mA target current / nominal + 20.58%
+          - <14> = 23.052 mA target current / nominal + 22.16%
+          - <15> = 23.348 mA target current / nominal + 23.73%
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      st,trim-hs-impedance:
+        description: |
+          Controls HS driver impedance tuning for choke compensation
+          - <0> = no impedance offset
+          - <1> = reduce the impedance by 2 ohms
+          - <2> = reduce the impedance by 4 ohms
+          - <3> = reduce the impedance by 6 ohms
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,tune-squelch-level:
+        description: |
+          Tunes the squelch DC threshold value
+          - <0> = no shift in threshold
+          - <1> = threshold shift by +7 mV
+          - <2> = threshold shift by -5 mV
+          - <3> = threshold shift by +14 mV
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,enable-hs-rx-gain-eq:
+        description: Enables the HS Rx gain equalizer
+        type: boolean
+
+      st,tune-hs-rx-offset:
+        description: |
+          Adjusts the HS Rx offset
+          - <0> = no offset
+          - <1> = offset of +5 mV
+          - <2> = offset of +10 mV
+          - <3> = offset of -5 mV
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,no-hs-ftime-ctrl:
+        description: Disables the HS fall time control of single ended signals during pre-emphasis
+        type: boolean
+
+      st,no-lsfs-sc:
+        description: Disables the short circuit protection in LS/FS driver
+        type: boolean
+
+      st,enable-hs-tx-staggering:
+        description: Enables the basic staggering in HS Tx mode
+        type: boolean
+
+    allOf:
+      - if:
+          properties:
+            reg:
+              const: 0
+        then:
+          properties:
+            "#phy-cells":
+              const: 0
+        else:
+          properties:
+            "#phy-cells":
+              const: 1
+              description:
+                The value is used to select UTMI switch output.
+                0 for OTG controller and 1 for Host controller.
+
+    required:
+      - reg
+      - phy-supply
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - vdda1v1-supply
+  - vdda1v8-supply
+  - usb-phy@0
+  - usb-phy@1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    usbphyc: usbphyc@5a006000 {
+        compatible = "st,stm32mp1-usbphyc";
+        reg = <0x5a006000 0x1000>;
+        clocks = <&rcc USBPHY_K>;
+        resets = <&rcc USBPHY_R>;
+        vdda1v1-supply = <&reg11>;
+        vdda1v8-supply = <&reg18>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #clock-cells = <0>;
+
+        usbphyc_port0: usb-phy@0 {
+            reg = <0>;
+            phy-supply = <&vdd_usb>;
+            #phy-cells = <0>;
+            st,tune-hs-dc-level = <2>;
+            st,enable-fs-rftime-tuning;
+            st,enable-hs-rftime-reduction;
+            st,trim-hs-current = <15>;
+            st,trim-hs-impedance = <1>;
+            st,tune-squelch-level = <3>;
+            st,tune-hs-rx-offset = <2>;
+            st,no-lsfs-sc;
+            connector {
+                compatible = "usb-a-connector";
+                vbus-supply = <&vbus_sw>;
+            };
+        };
+
+        usbphyc_port1: usb-phy@1 {
+            reg = <1>;
+            phy-supply = <&vdd_usb>;
+            #phy-cells = <1>;
+            st,tune-hs-dc-level = <2>;
+            st,enable-fs-rftime-tuning;
+            st,enable-hs-rftime-reduction;
+            st,trim-hs-current = <15>;
+            st,trim-hs-impedance = <1>;
+            st,tune-squelch-level = <3>;
+            st,tune-hs-rx-offset = <2>;
+            st,no-lsfs-sc;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
deleted file mode 100644
index d23ff90baad5..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-NVIDIA Tegra194 P2U binding
-
-Tegra194 has two PHY bricks namely HSIO (High Speed IO) and NVHS (NVIDIA High
-Speed) each interfacing with 12 and 8 P2U instances respectively.
-A P2U instance is a glue logic between Synopsys DesignWare Core PCIe IP's PIPE
-interface and PHY of HSIO/NVHS bricks. Each P2U instance represents one PCIe
-lane.
-
-Required properties:
-- compatible: For Tegra19x, must contain "nvidia,tegra194-p2u".
-- reg: Should be the physical address space and length of respective each P2U
-       instance.
-- reg-names: Must include the entry "ctl".
-
-Required properties for PHY port node:
-- #phy-cells: Defined by generic PHY bindings.  Must be 0.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Example:
-
-p2u_hsio_0: phy@3e10000 {
-	compatible = "nvidia,tegra194-p2u";
-	reg = <0x03e10000 0x10000>;
-	reg-names = "ctl";
-
-	#phy-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
new file mode 100644
index 000000000000..4dc5205d893b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/phy-tegra194-p2u.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra194 & Tegra234 P2U binding
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+
+description: >
+  Tegra194 has two PHY bricks namely HSIO (High Speed IO) and NVHS (NVIDIA High
+  Speed) each interfacing with 12 and 8 P2U instances respectively.
+  Tegra234 has three PHY bricks namely HSIO, NVHS and GBE (Gigabit Ethernet)
+  each interfacing with 8, 8 and 8 P2U instances respectively.
+  A P2U instance is a glue logic between Synopsys DesignWare Core PCIe IP's PIPE
+  interface and PHY of HSIO/NVHS/GBE bricks. Each P2U instance represents one
+  PCIe lane.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-p2u
+      - nvidia,tegra234-p2u
+
+  reg:
+    maxItems: 1
+    description: Should be the physical address space and length of respective each P2U instance.
+
+  reg-names:
+    items:
+      - const: ctl
+
+  nvidia,skip-sz-protect-en:
+    description: Should be present if two PCIe retimers are present between
+      the root port and its immediate downstream device.
+    type: boolean
+
+  '#phy-cells':
+    const: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    p2u_hsio_0: phy@3e10000 {
+        compatible = "nvidia,tegra194-p2u";
+        reg = <0x03e10000 0x10000>;
+        reg-names = "ctl";
+
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
new file mode 100644
index 000000000000..1e104ae76ee6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm eDP PHY
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  The Qualcomm eDP PHY is found in a number of Qualcomm platform and provides
+  the physical interface for Embedded Display Port.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-edp-phy
+      - qcom,sc8180x-edp-phy
+      - qcom,sc8280xp-dp-phy
+      - qcom,sc8280xp-edp-phy
+
+  reg:
+    items:
+      - description: PHY base register block
+      - description: tx0 register block
+      - description: tx1 register block
+      - description: PLL register block
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+
+  "#clock-cells":
+    const: 1
+
+  "#phy-cells":
+    const: 0
+
+  vdda-phy-supply: true
+  vdda-pll-supply: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@aec2a00 {
+      compatible = "qcom,sc8180x-edp-phy";
+      reg = <0x0aec2a00 0x1c0>,
+            <0x0aec2200 0xa0>,
+            <0x0aec2600 0xa0>,
+            <0x0aec2000 0x19c>;
+
+      clocks = <&dispcc 0>, <&dispcc 1>;
+      clock-names = "aux", "cfg_ahb";
+
+      #clock-cells = <1>;
+      #phy-cells = <0>;
+
+      vdda-phy-supply = <&vdd_a_edp_0_1p2>;
+      vdda-pll-supply = <&vdd_a_edp_0_0p9>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
new file mode 100644
index 000000000000..fdb277edebeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/phy/qcom,hdmi-phy-other.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon HDMI phy
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-phy-8660
+      - qcom,hdmi-phy-8960
+      - qcom,hdmi-phy-8974
+      - qcom,hdmi-phy-8084
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: hdmi_phy
+      - const: hdmi_pll
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  core-vdda-supply:
+    description: phandle to VDDA supply regulator
+
+  vddio-supply:
+    description: phandle to VDD I/O supply regulator
+
+  '#phy-cells':
+    const: 0
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-phy-8660
+              - qcom,hdmi-phy-8960
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: slave_iface
+        vddio-supply: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-phy-8084
+              - qcom,hdmi-phy-8974
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: iface
+            - const: alt_iface
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reg-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi_phy: phy@4a00400 {
+      compatible = "qcom,hdmi-phy-8960";
+      reg-names = "hdmi_phy",
+                  "hdmi_pll";
+      reg = <0x4a00400 0x60>,
+            <0x4a00500 0x100>;
+      #phy-cells = <0>;
+      power-domains = <&mmcc 1>;
+      clock-names = "slave_iface";
+      clocks = <&clk 21>;
+      core-vdda-supply = <&pm8921_hdmi_mvs>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
new file mode 100644
index 000000000000..83fe4b39b56f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/phy/qcom,hdmi-phy-qmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon QMP HDMI phy
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-phy-8996
+
+  reg:
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: hdmi_pll
+      - const: hdmi_tx_l0
+      - const: hdmi_tx_l1
+      - const: hdmi_tx_l2
+      - const: hdmi_tx_l3
+      - const: hdmi_phy
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: iface
+      - const: ref
+      - const: xo
+
+  power-domains:
+    maxItems: 1
+
+  vcca-supply:
+    description: phandle to VCCA supply regulator
+
+  vddio-supply:
+    description: phandle to VDD I/O supply regulator
+
+  '#clock-cells':
+    const: 0
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi-phy@9a0600 {
+      compatible = "qcom,hdmi-phy-8996";
+      reg = <0x009a0600 0x1c4>,
+            <0x009a0a00 0x124>,
+            <0x009a0c00 0x124>,
+            <0x009a0e00 0x124>,
+            <0x009a1000 0x124>,
+            <0x009a1200 0x0c8>;
+      reg-names = "hdmi_pll",
+                  "hdmi_tx_l0",
+                  "hdmi_tx_l1",
+                  "hdmi_tx_l2",
+                  "hdmi_tx_l3",
+                  "hdmi_phy";
+
+      clocks = <&mmcc 116>,
+               <&gcc 214>,
+               <&xo_board>;
+      clock-names = "iface",
+                    "ref",
+                    "xo";
+      #clock-cells = <0>;
+      #phy-cells = <0>;
+
+      vddio-supply = <&vreg_l12a_1p8>;
+      vcca-supply = <&vreg_l28a_0p925>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml
new file mode 100644
index 000000000000..35296c588e78
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,ipq806x-usb-phy-hs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ipq806x usb DWC3 HS PHY CONTROLLER
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description:
+  DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
+  controllers used in ipq806x. Each DWC3 PHY controller should have its
+  own node.
+
+properties:
+  compatible:
+    const: qcom,ipq806x-usb-phy-hs
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ref
+      - const: xo
+
+required:
+  - compatible
+  - "#phy-cells"
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    hs_phy_0: phy@110f8800 {
+      compatible = "qcom,ipq806x-usb-phy-hs";
+      reg = <0x110f8800 0x30>;
+      clocks = <&gcc USB30_0_UTMI_CLK>;
+      clock-names = "ref";
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml
new file mode 100644
index 000000000000..6cf5c6c06072
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,ipq806x-usb-phy-ss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ipq806x usb DWC3 SS PHY CONTROLLER
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description:
+  DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
+  controllers used in ipq806x. Each DWC3 PHY controller should have its
+  own node.
+
+properties:
+  compatible:
+    const: qcom,ipq806x-usb-phy-ss
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ref
+      - const: xo
+
+  qcom,rx-eq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Override value for rx_eq.
+    default: 4
+    maximum: 7
+
+  qcom,tx-deamp-3_5db:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Override value for transmit preemphasis.
+    default: 23
+    maximum: 63
+
+  qcom,mpll:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Override value for mpll.
+    default: 0
+    maximum: 7
+
+required:
+  - compatible
+  - "#phy-cells"
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    ss_phy_0: phy@110f8830 {
+      compatible = "qcom,ipq806x-usb-phy-ss";
+      reg = <0x110f8830 0x30>;
+      clocks = <&gcc USB30_0_MASTER_CLK>;
+      clock-names = "ref";
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml
new file mode 100644
index 000000000000..4e710ef75523
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (MSM8996 PCIe)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    const: qcom,msm8996-qmp-pcie-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: ref
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+      - const: cfg
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  vddp-ref-clk-supply: true
+
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description: one child node per PHY provided by this block
+    properties:
+      reg:
+        items:
+          - description: TX
+          - description: RX
+          - description: PCS
+
+      clocks:
+        items:
+          - description: PIPE clock
+
+      clock-names:
+        deprecated: true
+        items:
+          - enum:
+              - pipe0
+              - pipe1
+              - pipe2
+
+      resets:
+        items:
+          - description: PHY reset
+
+      reset-names:
+        deprecated: true
+        items:
+          - enum:
+              - lane0
+              - lane1
+              - lane2
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - resets
+      - "#clock-cells"
+      - clock-output-names
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    pcie_phy: phy-wrapper@34000 {
+        compatible = "qcom,msm8996-qmp-pcie-phy";
+        reg = <0x34000 0x488>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x34000 0x4000>;
+
+        clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+                 <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+                 <&gcc GCC_PCIE_CLKREF_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref";
+
+        resets = <&gcc GCC_PCIE_PHY_BCR>,
+                 <&gcc GCC_PCIE_PHY_COM_BCR>,
+                 <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+        reset-names = "phy", "common", "cfg";
+
+        vdda-phy-supply = <&vreg_l28a_0p925>;
+        vdda-pll-supply = <&vreg_l12a_1p8>;
+
+        pciephy_0: phy@1000 {
+            reg = <0x1000 0x130>,
+                  <0x1200 0x200>,
+                  <0x1400 0x1dc>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+            resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_0_pipe_clk_src";
+
+            #phy-cells = <0>;
+        };
+
+        pciephy_1: phy@2000 {
+            reg = <0x2000 0x130>,
+                  <0x2200 0x200>,
+                  <0x2400 0x1dc>;
+
+            clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+            resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_1_pipe_clk_src";
+
+            #phy-cells = <0>;
+        };
+
+        pciephy_2: phy@3000 {
+            reg = <0x3000 0x130>,
+                  <0x3200 0x200>,
+                  <0x3400 0x1dc>;
+
+            clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+            resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_2_pipe_clk_src";
+
+            #phy-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
new file mode 100644
index 000000000000..324ad7d03a38
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
@@ -0,0 +1,296 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (PCIe)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq6018-qmp-pcie-phy
+      - qcom,ipq8074-qmp-gen3-pcie-phy
+      - qcom,ipq8074-qmp-pcie-phy
+      - qcom,msm8998-qmp-pcie-phy
+      - qcom,sc8180x-qmp-pcie-phy
+      - qcom,sdm845-qhp-pcie-phy
+      - qcom,sdm845-qmp-pcie-phy
+      - qcom,sdx55-qmp-pcie-phy
+      - qcom,sm8250-qmp-gen3x1-pcie-phy
+      - qcom,sm8250-qmp-gen3x2-pcie-phy
+      - qcom,sm8250-qmp-modem-pcie-phy
+      - qcom,sm8450-qmp-gen3x1-pcie-phy
+      - qcom,sm8450-qmp-gen4x2-pcie-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  vddp-ref-clk-supply: true
+
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description: single PHY-provider child node
+    properties:
+      reg:
+        minItems: 3
+        maxItems: 6
+
+      clocks:
+        items:
+          - description: PIPE clock
+
+      clock-names:
+        deprecated: true
+        items:
+          - const: pipe0
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - "#clock-cells"
+      - clock-output-names
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-qmp-pcie-phy
+              - qcom,ipq8074-qmp-gen3-pcie-phy
+              - qcom,ipq8074-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-qmp-pcie-phy
+              - qcom,sdm845-qhp-pcie-phy
+              - qcom,sdm845-qmp-pcie-phy
+              - qcom,sdx55-qmp-pcie-phy
+              - qcom,sm8250-qmp-gen3x1-pcie-phy
+              - qcom,sm8250-qmp-gen3x2-pcie-phy
+              - qcom,sm8250-qmp-modem-pcie-phy
+              - qcom,sm8450-qmp-gen3x1-pcie-phy
+              - qcom,sm8450-qmp-gen4x2-pcie-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: refgen
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: phy
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8250-qmp-gen3x2-pcie-phy
+              - qcom,sm8250-qmp-modem-pcie-phy
+              - qcom,sm8450-qmp-gen4x2-pcie-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX lane 1
+                - description: RX lane 1
+                - description: PCS
+                - description: TX lane 2
+                - description: RX lane 2
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-qmp-pcie-phy
+              - qcom,sdm845-qmp-pcie-phy
+              - qcom,sdx55-qmp-pcie-phy
+              - qcom,sm8250-qmp-gen3x1-pcie-phy
+              - qcom,sm8450-qmp-gen3x1-pcie-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-qmp-pcie-phy
+              - qcom,ipq8074-qmp-pcie-phy
+              - qcom,msm8998-qmp-pcie-phy
+              - qcom,sdm845-qhp-pcie-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    phy-wrapper@1c0e000 {
+        compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
+        reg = <0x01c0e000 0x1c0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x01c0e000 0x1000>;
+
+        clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+                 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+                 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
+                 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+        resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+        reset-names = "phy";
+
+        vdda-phy-supply = <&vreg_l10c_0p88>;
+        vdda-pll-supply = <&vreg_l6b_1p2>;
+
+        phy@200 {
+            reg = <0x200 0x170>,
+                  <0x400 0x200>,
+                  <0xa00 0x1f0>,
+                  <0x600 0x170>,
+                  <0x800 0x200>,
+                  <0xe00 0xf4>;
+
+            clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_1_pipe_clk";
+
+            #phy-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml
new file mode 100644
index 000000000000..815c375d0f7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml
@@ -0,0 +1,240 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,qmp-ufs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (UFS)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8996-qmp-ufs-phy
+      - qcom,msm8998-qmp-ufs-phy
+      - qcom,sc8180x-qmp-ufs-phy
+      - qcom,sc8280xp-qmp-ufs-phy
+      - qcom,sdm845-qmp-ufs-phy
+      - qcom,sm6115-qmp-ufs-phy
+      - qcom,sm6350-qmp-ufs-phy
+      - qcom,sm8150-qmp-ufs-phy
+      - qcom,sm8250-qmp-ufs-phy
+      - qcom,sm8350-qmp-ufs-phy
+      - qcom,sm8450-qmp-ufs-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: ufsphy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  vddp-ref-clk-supply: true
+
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description: single PHY-provider child node
+    properties:
+      reg:
+        minItems: 3
+        maxItems: 6
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: ref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-ufs-phy
+              - qcom,sc8180x-qmp-ufs-phy
+              - qcom,sc8280xp-qmp-ufs-phy
+              - qcom,sdm845-qmp-ufs-phy
+              - qcom,sm6115-qmp-ufs-phy
+              - qcom,sm6350-qmp-ufs-phy
+              - qcom,sm8150-qmp-ufs-phy
+              - qcom,sm8250-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: ref
+            - const: ref_aux
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: ref
+            - const: ref_aux
+            - const: qref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-ufs-phy
+              - qcom,sc8280xp-qmp-ufs-phy
+              - qcom,sdm845-qmp-ufs-phy
+              - qcom,sm6350-qmp-ufs-phy
+              - qcom,sm8150-qmp-ufs-phy
+              - qcom,sm8250-qmp-ufs-phy
+              - qcom,sm8350-qmp-ufs-phy
+              - qcom,sm8450-qmp-ufs-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX lane 1
+                - description: RX lane 1
+                - description: PCS
+                - description: TX lane 2
+                - description: RX lane 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-qmp-ufs-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+              - qcom,sm6115-qmp-ufs-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    phy-wrapper@1d87000 {
+        compatible = "qcom,sc8280xp-qmp-ufs-phy";
+        reg = <0x01d87000 0xe10>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x01d87000 0x1000>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+        clock-names = "ref", "ref_aux";
+
+        resets = <&ufs_mem_hc 0>;
+        reset-names = "ufsphy";
+
+        vdda-phy-supply = <&vreg_l6b>;
+        vdda-pll-supply = <&vreg_l3b>;
+
+        phy@400 {
+            reg = <0x400 0x108>,
+                  <0x600 0x1e0>,
+                  <0xc00 0x1dc>,
+                  <0x800 0x108>,
+                  <0xa00 0x1e0>;
+            #phy-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml
new file mode 100644
index 000000000000..7acb4b7de7f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml
@@ -0,0 +1,401 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,qmp-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (USB)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq6018-qmp-usb3-phy
+      - qcom,ipq8074-qmp-usb3-phy
+      - qcom,msm8996-qmp-usb3-phy
+      - qcom,msm8998-qmp-usb3-phy
+      - qcom,qcm2290-qmp-usb3-phy
+      - qcom,sc7180-qmp-usb3-phy
+      - qcom,sc8180x-qmp-usb3-phy
+      - qcom,sc8280xp-qmp-usb3-uni-phy
+      - qcom,sdm845-qmp-usb3-phy
+      - qcom,sdm845-qmp-usb3-uni-phy
+      - qcom,sdx55-qmp-usb3-uni-phy
+      - qcom,sdx65-qmp-usb3-uni-phy
+      - qcom,sm8150-qmp-usb3-phy
+      - qcom,sm8150-qmp-usb3-uni-phy
+      - qcom,sm8250-qmp-usb3-phy
+      - qcom,sm8250-qmp-usb3-uni-phy
+      - qcom,sm8350-qmp-usb3-phy
+      - qcom,sm8350-qmp-usb3-uni-phy
+      - qcom,sm8450-qmp-usb3-phy
+
+  reg:
+    minItems: 1
+    items:
+      - description: serdes
+      - description: DP_COM
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    maxItems: 2
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  vddp-ref-clk-supply: true
+
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description: single PHY-provider child node
+    properties:
+      reg:
+        minItems: 3
+        maxItems: 6
+
+      clocks:
+        items:
+          - description: PIPE clock
+
+      clock-names:
+        deprecated: true
+        items:
+          - const: pipe0
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - "#clock-cells"
+      - clock-output-names
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: phy
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-qmp-usb3-phy
+              - qcom,msm8996-qmp-usb3-phy
+              - qcom,msm8998-qmp-usb3-phy
+              - qcom,sdx55-qmp-usb3-uni-phy
+              - qcom,sdx65-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-usb3-uni-phy
+              - qcom,sm8150-qmp-usb3-phy
+              - qcom,sm8150-qmp-usb3-uni-phy
+              - qcom,sm8250-qmp-usb3-uni-phy
+              - qcom,sm8350-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: ref_clk_src
+            - const: ref
+            - const: com_aux
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8250-qmp-usb3-phy
+              - qcom,sm8350-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux
+            - const: ref_clk_src
+            - const: com_aux
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy_phy
+            - const: phy
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-usb3-uni-phy
+    then:
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-qmp-usb3-phy
+              - qcom,sm8150-qmp-usb3-phy
+              - qcom,sm8350-qmp-usb3-phy
+              - qcom,sm8450-qmp-usb3-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX lane 1
+                - description: RX lane 1
+                - description: PCS
+                - description: TX lane 2
+                - description: RX lane 2
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-usb3-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX lane 1
+                - description: RX lane 1
+                - description: PCS
+                - description: TX lane 2
+                - description: RX lane 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-qmp-usb3-phy
+              - qcom,ipq8074-qmp-usb3-phy
+              - qcom,qcm2290-qmp-usb3-phy
+              - qcom,sc7180-qmp-usb3-phy
+              - qcom,sc8180x-qmp-usb3-phy
+              - qcom,sdx55-qmp-usb3-uni-phy
+              - qcom,sdx65-qmp-usb3-uni-phy
+              - qcom,sm8150-qmp-usb3-uni-phy
+              - qcom,sm8250-qmp-usb3-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-usb3-phy
+              - qcom,sc8280xp-qmp-usb3-uni-phy
+              - qcom,sm8250-qmp-usb3-uni-phy
+              - qcom,sm8350-qmp-usb3-uni-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    usb_2_qmpphy: phy-wrapper@88eb000 {
+        compatible = "qcom,sdm845-qmp-usb3-uni-phy";
+        reg = <0x088eb000 0x18c>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x088eb000 0x2000>;
+
+        clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >,
+                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+                 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+                 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+        resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+                 <&gcc GCC_USB3_PHY_SEC_BCR>;
+        reset-names = "phy", "common";
+
+        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+        vdda-pll-supply = <&vdda_usb2_ss_core>;
+
+        usb_2_ssphy: phy@200 {
+                reg = <0x200 0x128>,
+                      <0x400 0x1fc>,
+                      <0x800 0x218>,
+                      <0x600 0x70>;
+
+                clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+
+                #clock-cells = <0>;
+                clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+                #phy-cells = <0>;
+            };
+        };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
new file mode 100644
index 000000000000..97a7ecafbf85
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
@@ -0,0 +1,224 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm QMP USB3 DP PHY controller
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@quicinc.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-qmp-usb3-dp-phy
+      - qcom,sc7280-qmp-usb3-dp-phy
+      - qcom,sc8180x-qmp-usb3-dp-phy
+      - qcom,sc8280xp-qmp-usb43dp-phy
+      - qcom,sdm845-qmp-usb3-dp-phy
+      - qcom,sm8250-qmp-usb3-dp-phy
+  reg:
+    items:
+      - description: Address and length of PHY's USB serdes block.
+      - description: Address and length of the DP_COM control block.
+      - description: Address and length of PHY's DP serdes block.
+
+  reg-names:
+    items:
+      - const: usb
+      - const: dp_com
+      - const: dp
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    items:
+      - description: Phy aux clock.
+      - description: Phy config clock.
+      - description: 19.2 MHz ref clk.
+      - description: Phy common block aux clock.
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: ref
+      - const: com_aux
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: reset of phy block.
+      - description: phy common block reset.
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+  vddp-ref-clk-supply:
+    description:
+      Phandle to a regulator supply to any specific refclk pll block.
+
+#Required nodes:
+patternProperties:
+  "^usb3-phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    description:
+      The USB3 PHY.
+
+    properties:
+      reg:
+        items:
+          - description: Address and length of TX.
+          - description: Address and length of RX.
+          - description: Address and length of PCS.
+          - description: Address and length of TX2.
+          - description: Address and length of RX2.
+          - description: Address and length of pcs_misc.
+
+      clocks:
+        items:
+          - description: pipe clock
+
+      clock-names:
+        deprecated: true
+        items:
+          - const: pipe0
+
+      clock-output-names:
+        items:
+          - const: usb3_phy_pipe_clk_src
+
+      '#clock-cells':
+        const: 0
+
+      '#phy-cells':
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - '#clock-cells'
+      - '#phy-cells'
+
+  "^dp-phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    description:
+      The DP PHY.
+
+    properties:
+      reg:
+        items:
+          - description: Address and length of TX.
+          - description: Address and length of RX.
+          - description: Address and length of PCS.
+          - description: Address and length of TX2.
+          - description: Address and length of RX2.
+
+      '#clock-cells':
+        const: 1
+
+      '#phy-cells':
+        const: 0
+
+    required:
+      - reg
+      - '#clock-cells'
+      - '#phy-cells'
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-usb43dp-phy
+    then:
+      required:
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    usb_1_qmpphy: phy-wrapper@88e9000 {
+        compatible = "qcom,sdm845-qmp-usb3-dp-phy";
+        reg = <0x088e9000 0x18c>,
+              <0x088e8000 0x10>,
+              <0x088ea000 0x40>;
+        reg-names = "usb", "dp_com", "dp";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x088e9000 0x2000>;
+
+        clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+                 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+                 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+        resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+                 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+        reset-names = "phy", "common";
+
+        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+        vdda-pll-supply = <&vdda_usb2_ss_core>;
+
+        usb3-phy@200 {
+            reg = <0x200 0x128>,
+                  <0x400 0x200>,
+                  <0xc00 0x218>,
+                  <0x600 0x128>,
+                  <0x800 0x200>,
+                  <0xa00 0x100>;
+            #clock-cells = <0>;
+            #phy-cells = <0>;
+            clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+            clock-output-names = "usb3_phy_pipe_clk_src";
+        };
+
+        dp-phy@88ea200 {
+            reg = <0xa200 0x200>,
+                  <0xa400 0x200>,
+                  <0xaa00 0x200>,
+                  <0xa600 0x200>,
+                  <0xa800 0x200>;
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
new file mode 100644
index 000000000000..636ea430fbff
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm QUSB2 phy controller
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@quicinc.com>
+
+description:
+  QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,ipq8074-qusb2-phy
+              - qcom,msm8953-qusb2-phy
+              - qcom,msm8996-qusb2-phy
+              - qcom,msm8998-qusb2-phy
+              - qcom,qcm2290-qusb2-phy
+              - qcom,sdm660-qusb2-phy
+              - qcom,ipq6018-qusb2-phy
+              - qcom,sm4250-qusb2-phy
+              - qcom,sm6115-qusb2-phy
+      - items:
+          - enum:
+              - qcom,sc7180-qusb2-phy
+              - qcom,sdm670-qusb2-phy
+              - qcom,sdm845-qusb2-phy
+              - qcom,sm6350-qusb2-phy
+          - const: qcom,qusb2-v2-phy
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    items:
+      - description: phy config clock
+      - description: 19.2 MHz ref clk
+      - description: phy interface clock (Optional)
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: cfg_ahb
+      - const: ref
+      - const: iface
+
+  vdd-supply:
+    description:
+      Phandle to 0.9V regulator supply to PHY digital circuit.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+  vdda-phy-dpdm-supply:
+    description:
+      Phandle to 3.1V regulator supply to Dp/Dm port signals.
+
+  resets:
+    maxItems: 1
+    description:
+      Phandle to reset to phy block.
+
+  nvmem-cells:
+    maxItems: 1
+    description:
+      Phandle to nvmem cell that contains 'HS Tx trim'
+      tuning parameter value for qusb2 phy.
+
+  qcom,tcsr-syscon:
+    description:
+      Phandle to TCSR syscon register region.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: qcom,qusb2-v2-phy
+then:
+  properties:
+    qcom,imp-res-offset-value:
+      description:
+        It is a 6 bit value that specifies offset to be
+        added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY
+        tuning parameter that may vary for different boards of same SOC.
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 63
+      default: 0
+
+    qcom,bias-ctrl-value:
+      description:
+        It is a 6 bit value that specifies bias-ctrl-value. It is a PHY
+        tuning parameter that may vary for different boards of same SOC.
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 63
+      default: 32
+
+    qcom,charge-ctrl-value:
+      description:
+        It is a 2 bit value that specifies charge-ctrl-value. It is a PHY
+        tuning parameter that may vary for different boards of same SOC.
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 3
+      default: 0
+
+    qcom,hstx-trim-value:
+      description:
+        It is a 4 bit value that specifies tuning for HSTX
+        output current.
+        Possible range is - 15mA to 24mA (stepsize of 600 uA).
+        See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 15
+      default: 3
+
+    qcom,preemphasis-level:
+      description:
+        It is a 2 bit value that specifies pre-emphasis level.
+        Possible range is 0 to 15% (stepsize of 5%).
+        See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 3
+      default: 2
+
+    qcom,preemphasis-width:
+      description:
+        It is a 1 bit value that specifies how long the HSTX
+        pre-emphasis (specified using qcom,preemphasis-level) must be in
+        effect. Duration could be half-bit of full-bit.
+        See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 1
+      default: 0
+
+    qcom,hsdisc-trim-value:
+      description:
+        It is a 2 bit value tuning parameter that control disconnect
+        threshold and may vary for different boards of same SOC.
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 3
+      default: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - vdd-supply
+  - vdda-pll-supply
+  - vdda-phy-dpdm-supply
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    hsusb_phy: phy@7411000 {
+        compatible = "qcom,msm8996-qusb2-phy";
+        reg = <0x7411000 0x180>;
+        #phy-cells = <0>;
+
+        clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+                 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+        clock-names = "cfg_ahb", "ref";
+
+        vdd-supply = <&pm8994_l28>;
+        vdda-pll-supply = <&pm8994_l12>;
+        vdda-phy-dpdm-supply = <&pm8994_l24>;
+
+        resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+        nvmem-cells = <&qusb2p_hstx_trim>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml
new file mode 100644
index 000000000000..abcc4373f39e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,usb-hs-28nm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Synopsys DesignWare Core 28nm High-Speed PHY
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  Qualcomm Low-Speed, Full-Speed, Hi-Speed 28nm USB PHY
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-hs-28nm-femtophy
+      - qcom,usb-hs-28nm-mdm9607
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: rpmcc ref clock
+      - description: PHY AHB clock
+      - description: Rentention clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ahb
+      - const: sleep
+
+  resets:
+    items:
+      - description: PHY core reset
+      - description: POR reset
+
+  reset-names:
+    items:
+      - const: phy
+      - const: por
+
+  vdd-supply:
+    description: phandle to the regulator VDD supply node.
+
+  vdda1p8-supply:
+    description: phandle to the regulator 1.8V supply node.
+
+  vdda3p3-supply:
+    description: phandle to the regulator 3.3V supply node.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdd-supply
+  - vdda1p8-supply
+  - vdda3p3-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    usb2_phy_prim: phy@7a000 {
+        compatible = "qcom,usb-hs-28nm-femtophy";
+        reg = <0x0007a000 0x200>;
+        #phy-cells = <0>;
+        clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+                 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+                 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+        clock-names = "ref", "ahb", "sleep";
+        resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
+                 <&gcc GCC_USB2A_PHY_BCR>;
+        reset-names = "phy", "por";
+        vdd-supply = <&vreg_l4_1p2>;
+        vdda1p8-supply = <&vreg_l5_1p8>;
+        vdda3p3-supply = <&vreg_l12_3p3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
deleted file mode 100644
index b3b75c1e6285..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-Qualcomm's USB HS PHY
-
-PROPERTIES
-
-- compatible:
-    Usage: required
-    Value type: <string>
-    Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the
-                following:
-
-                        "qcom,usb-hs-phy-apq8064"
-                        "qcom,usb-hs-phy-msm8916"
-                        "qcom,usb-hs-phy-msm8974"
-
-- #phy-cells:
-    Usage: required
-    Value type: <u32>
-    Definition: Should contain 0
-
-- clocks:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: Should contain clock specifier for the reference and sleep
-                clocks
-
-- clock-names:
-    Usage: required
-    Value type: <stringlist>
-    Definition: Should contain "ref" and "sleep" for the reference and sleep
-                clocks respectively
-
-- resets:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: Should contain the phy and POR resets
-
-- reset-names:
-    Usage: required
-    Value type: <stringlist>
-    Definition: Should contain "phy" and "por" for the phy and POR resets
-                respectively
-
-- v3p3-supply:
-    Usage: required
-    Value type: <phandle>
-    Definition: Should contain a reference to the 3.3V supply
-
-- v1p8-supply:
-    Usage: required
-    Value type: <phandle>
-    Definition: Should contain a reference to the 1.8V supply
-
-- extcon:
-    Usage: optional
-    Value type: <prop-encoded-array>
-    Definition: Should contain the vbus extcon
-
-- qcom,init-seq:
-    Usage: optional
-    Value type: <u8 array>
-    Definition: Should contain a sequence of ULPI address and value pairs to
-                program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related
-                to Device Mode Eye Diagram test. The addresses are offsets
-                from the ULPI_EXT_VENDOR_SPECIFIC address, for example,
-                <0x1 0x53> would mean "write the value 0x53 to address 0x81".
-
-EXAMPLE
-
-otg: usb-controller {
-	ulpi {
-		phy {
-			compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
-			#phy-cells = <0>;
-			clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-			clock-names = "ref", "sleep";
-			resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
-			reset-names = "phy", "por";
-			v3p3-supply = <&pm8941_l24>;
-			v1p8-supply = <&pm8941_l6>;
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x63>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
new file mode 100644
index 000000000000..0655e485b260
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,usb-hs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's USB HS PHY binding description
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: qcom,usb-hs-phy-apq8064
+then:
+  properties:
+    resets:
+      maxItems: 1
+
+    reset-names:
+      const: por
+
+else:
+  properties:
+    resets:
+      minItems: 2
+      maxItems: 2
+
+    reset-names:
+      items:
+        - const: phy
+        - const: por
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,usb-hs-phy-apq8064
+          - qcom,usb-hs-phy-msm8226
+          - qcom,usb-hs-phy-msm8916
+          - qcom,usb-hs-phy-msm8974
+      - const: qcom,usb-hs-phy
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+    contains:
+      items:
+        - const: ref
+        - const: sleep
+
+  resets: true
+
+  reset-names: true
+
+  v1p8-supply: true
+
+  v3p3-supply: true
+
+  extcon: true
+
+  "#phy-cells":
+    const: 0
+
+  qcom,init-seq:
+    $ref: /schemas/types.yaml#/definitions/uint8-matrix
+    description: >
+      Sequence of ULPI address and value pairs to
+      program into the ULPI_EXT_VENDOR_SPECIFIC area.
+      This is related to Device Mode Eye Diagram test.
+    maxItems: 32 # no hard limit
+    items:
+      items:
+        - description: >
+            the address is offset from the ULPI_EXT_VENDOR_SPECIFIC address
+        - description: value
+
+required:
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    otg: usb-controller {
+      #reset-cells = <1>;
+
+      ulpi {
+        phy {
+          compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
+          #phy-cells = <0>;
+          clocks = <&clk 0>, <&clk 258>;
+          clock-names = "ref", "sleep";
+          resets = <&gcc 10>, <&otg 0>;
+          reset-names = "phy", "por";
+          v3p3-supply = <&pm8941_l24>;
+          v1p8-supply = <&pm8941_l6>;
+          extcon = <&smbb>;
+          qcom,init-seq = /bits/ 8 <0x1 0x63>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
new file mode 100644
index 000000000000..68e70961beb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Synopsys Femto High-Speed USB PHY V2
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@quicinc.com>
+
+description: |
+  Qualcomm High-Speed USB PHY
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-snps-hs-5nm-phy
+      - qcom,usb-snps-hs-7nm-phy
+      - qcom,sc7280-usb-hs-phy
+      - qcom,sc8180x-usb-hs-phy
+      - qcom,sc8280xp-usb-hs-phy
+      - qcom,sm6375-usb-hs-phy
+      - qcom,sm8150-usb-hs-phy
+      - qcom,sm8250-usb-hs-phy
+      - qcom,sm8350-usb-hs-phy
+      - qcom,sm8450-usb-hs-phy
+      - qcom,usb-snps-femto-v2-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: rpmhcc ref clock
+
+  clock-names:
+    items:
+      - const: ref
+
+  resets:
+    items:
+      - description: PHY core reset
+
+  vdda-pll-supply:
+    description: phandle to the regulator VDD supply node.
+
+  vdda18-supply:
+    description: phandle to the regulator 1.8V supply node.
+
+  vdda33-supply:
+    description: phandle to the regulator 3.3V supply node.
+
+  qcom,hs-disconnect-bp:
+    description:
+      This adjusts the voltage level for the threshold used to
+      detect a disconnect event at the host.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -272
+    maximum: 2156
+
+  qcom,squelch-detector-bp:
+    description:
+      This adjusts the voltage level for the threshold used to
+      detect valid high-speed data.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -2090
+    maximum: 1590
+
+  qcom,hs-amplitude-bp:
+    description:
+      This adjusts the high-speed DC level voltage.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -660
+    maximum: 2670
+
+  qcom,pre-emphasis-duration-bp:
+    description:
+      This signal controls the duration for which the
+      HS pre-emphasis current is sourced onto DP<#> or DM<#>.
+      The HS Transmitter pre-emphasis duration is defined in terms of
+      unit amounts. One unit of pre-emphasis duration is approximately
+      650 ps and is defined as 1X pre-emphasis duration.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: 10000
+    maximum: 20000
+
+  qcom,pre-emphasis-amplitude-bp:
+    description:
+      This signal controls the amount of current sourced to
+      DP<#> and DM<#> after a J-to-K or K-to-J transition.
+      The HS Transmitter pre-emphasis current is defined in terms of unit
+      amounts. One unit amount is approximately 2 mA and is defined as
+      1X pre-emphasis current.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: 10000
+    maximum: 40000
+
+  qcom,hs-rise-fall-time-bp:
+    description:
+      This adjusts the rise/fall times of the high-speed waveform.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -4100
+    maximum: 5430
+
+  qcom,hs-crossover-voltage-microvolt:
+    description:
+      This adjusts the voltage at which the DP<#> and DM<#>
+      signals cross while transmitting in HS mode.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -31000
+    maximum: 28000
+
+  qcom,hs-output-impedance-micro-ohms:
+    description:
+      In some applications, there can be significant series resistance
+      on the D+ and D- paths between the transceiver and cable. This adjusts
+      the driver source impedance to compensate for added series
+      resistance on the USB. The hardware accepts only discrete values. The
+      value closest to the provided input will be chosen as the override value
+      for this param.
+    minimum: -2300000
+    maximum: 6100000
+
+  qcom,ls-fs-output-impedance-bp:
+    description:
+      This adjusts the low- and full-speed single-ended source
+      impedance while driving high. The following adjustment values are based
+      on nominal process, voltage, and temperature.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -1053
+    maximum: 1310
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - vdda-pll-supply
+  - vdda18-supply
+  - vdda33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    phy@88e2000 {
+        compatible = "qcom,sm8150-usb-hs-phy";
+        reg = <0x088e2000 0x400>;
+        #phy-cells = <0>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "ref";
+
+        resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+        vdda-pll-supply = <&vdd_usb_hs_core>;
+        vdda33-supply = <&vdda_usb_hs_3p1>;
+        vdda18-supply = <&vdda_usb_hs_1p8>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml
new file mode 100644
index 000000000000..bd1388d62ce0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,usb-ss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-ss-28nm-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: rpmcc clock
+      - description: PHY AHB clock
+      - description: SuperSpeed pipe clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ahb
+      - const: pipe
+
+  vdd-supply:
+    description: phandle to the regulator VDD supply node.
+
+  vdda1p8-supply:
+    description: phandle to the regulator 1.8V supply node.
+
+  resets:
+    items:
+      - description: COM reset
+      - description: PHY reset line
+
+  reset-names:
+    items:
+      - const: com
+      - const: phy
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - vdd-supply
+  - vdda1p8-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    usb3_phy: usb3-phy@78000 {
+        compatible = "qcom,usb-ss-28nm-phy";
+        reg = <0x78000 0x400>;
+        #phy-cells = <0>;
+        clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+                 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+                 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+        clock-names = "ref", "ahb", "pipe";
+        resets = <&gcc GCC_USB3_PHY_BCR>,
+                 <&gcc GCC_USB3PHY_PHY_BCR>;
+        reset-names = "com", "phy";
+        vdd-supply = <&vreg_l3_1p05>;
+        vdda1p8-supply = <&vreg_l5_1p8>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
deleted file mode 100644
index a1697c27aecd..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Qualcomm DWC3 HS AND SS PHY CONTROLLER
---------------------------------------
-
-DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
-controllers.  Each DWC3 PHY controller should have its own node.
-
-Required properties:
-- compatible: should contain one of the following:
-	- "qcom,dwc3-hs-usb-phy" for High Speed Synopsis PHY controller
-	- "qcom,dwc3-ss-usb-phy" for Super Speed Synopsis PHY controller
-- reg: offset and length of the DWC3 PHY controller register set
-- #phy-cells: must be zero
-- clocks: a list of phandles and clock-specifier pairs, one for each entry in
-  clock-names.
-- clock-names: Should contain "ref" for the PHY reference clock
-
-Optional clocks:
-  "xo"		External reference clock
-
-Example:
-		phy@100f8800 {
-			compatible = "qcom,dwc3-hs-usb-phy";
-			reg = <0x100f8800 0x30>;
-			clocks = <&gcc USB30_0_UTMI_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-		};
-
-		phy@100f8830 {
-			compatible = "qcom,dwc3-ss-usb-phy";
-			reg = <0x100f8830 0x30>;
-			clocks = <&gcc USB30_0_MASTER_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-		};
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
deleted file mode 100644
index eac9ad3cbbc8..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ /dev/null
@@ -1,227 +0,0 @@
-Qualcomm QMP PHY controller
-===========================
-
-QMP phy controller supports physical layer functionality for a number of
-controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
-
-Required properties:
- - compatible: compatible list, contains:
-	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
-	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
-	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
-	       "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
-	       "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998,
-	       "qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998,
-	       "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
-	       "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
-	       "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845,
-	       "qcom,sm8150-qmp-ufs-phy" for UFS QMP phy on sm8150.
-
-- reg:
-  - index 0: address and length of register set for PHY's common
-             serdes block.
-  - index 1: address and length of the DP_COM control block (for
-             "qcom,sdm845-qmp-usb3-phy" only).
-
-- reg-names:
-  - For "qcom,sdm845-qmp-usb3-phy":
-    - Should be: "reg-base", "dp_com"
-  - For all others:
-    - The reg-names property shouldn't be defined.
-
- - #address-cells: must be 1
- - #size-cells: must be 1
- - ranges: must be present
-
- - clocks: a list of phandles and clock-specifier pairs,
-	   one for each entry in clock-names.
- - clock-names: "cfg_ahb" for phy config clock,
-		"aux" for phy aux clock,
-		"ref" for 19.2 MHz ref clk,
-		"com_aux" for phy common block aux clock,
-		"ref_aux" for phy reference aux clock,
-
-		For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,msm8996-qmp-usb3-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,msm8998-qmp-usb3-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,msm8998-qmp-ufs-phy" must contain:
-			"ref", "ref_aux".
-		For "qcom,msm8998-qmp-pcie-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,sdm845-qmp-usb3-phy" must contain:
-			"aux", "cfg_ahb", "ref", "com_aux".
-		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
-			"aux", "cfg_ahb", "ref", "com_aux".
-		For "qcom,sdm845-qmp-ufs-phy" must contain:
-			"ref", "ref_aux".
-		For "qcom,sm8150-qmp-ufs-phy" must contain:
-			"ref", "ref_aux".
-
- - resets: a list of phandles and reset controller specifier pairs,
-	   one for each entry in reset-names.
- - reset-names: "phy" for reset of phy block,
-		"common" for phy common block reset,
-		"cfg" for phy's ahb cfg block reset,
-		"ufsphy" for the PHY reset in the UFS controller.
-
-		For "qcom,ipq8074-qmp-pcie-phy" must contain:
-			"phy", "common".
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
-			"phy", "common", "cfg".
-		For "qcom,msm8996-qmp-usb3-phy" must contain
-			"phy", "common".
-		For "qcom,msm8998-qmp-usb3-phy" must contain
-			"phy", "common".
-		For "qcom,msm8998-qmp-ufs-phy": must contain:
-			"ufsphy".
-		For "qcom,msm8998-qmp-pcie-phy" must contain:
-			"phy", "common".
-		For "qcom,sdm845-qmp-usb3-phy" must contain:
-			"phy", "common".
-		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
-			"phy", "common".
-		For "qcom,sdm845-qmp-ufs-phy": must contain:
-			"ufsphy".
-		For "qcom,sm8150-qmp-ufs-phy": must contain:
-			"ufsphy".
-
- - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
- - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
-
-Optional properties:
- - vddp-ref-clk-supply: Phandle to a regulator supply to any specific refclk
-			pll block.
-
-Required nodes:
- - Each device node of QMP phy is required to have as many child nodes as
-   the number of lanes the PHY has.
-
-Required properties for child nodes of PCIe PHYs (one child per lane):
- - reg: list of offset and length pairs of register sets for PHY blocks -
-	tx, rx, pcs, and pcs_misc (optional).
- - #phy-cells: must be 0
-
-Required properties for a single "lanes" child node of non-PCIe PHYs:
- - reg: list of offset and length pairs of register sets for PHY blocks
-	For 1-lane devices:
-		tx, rx, pcs, and (optionally) pcs_misc
-	For 2-lane devices:
-		tx0, rx0, pcs, tx1, rx1, and (optionally) pcs_misc
- - #phy-cells: must be 0
-
-Required properties for child node of PCIe and USB3 qmp phys:
- - clocks: a list of phandles and clock-specifier pairs,
-	   one for each entry in clock-names.
- - clock-names: Must contain following:
-		 "pipe<lane-number>" for pipe clock specific to each lane.
- - clock-output-names: Name of the PHY clock that will be the parent for
-		       the above pipe clock.
-	For "qcom,ipq8074-qmp-pcie-phy":
-		- "pcie20_phy0_pipe_clk"	Pipe Clock parent
-			(or)
-		  "pcie20_phy1_pipe_clk"
- - #clock-cells: must be 0
-    - Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then
-      gate-controlled by the gcc.
-
-Required properties for child node of PHYs with lane reset, AKA:
-	"qcom,msm8996-qmp-pcie-phy"
- - resets: a list of phandles and reset controller specifier pairs,
-	   one for each entry in reset-names.
- - reset-names: Must contain following:
-		 "lane<lane-number>" for reset specific to each lane.
-
-Example:
-	phy@34000 {
-		compatible = "qcom,msm8996-qmp-pcie-phy";
-		reg = <0x34000 0x488>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
-			<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
-			<&gcc GCC_PCIE_CLKREF_CLK>;
-		clock-names = "aux", "cfg_ahb", "ref";
-
-		vdda-phy-supply = <&pm8994_l28>;
-		vdda-pll-supply = <&pm8994_l12>;
-
-		resets = <&gcc GCC_PCIE_PHY_BCR>,
-			<&gcc GCC_PCIE_PHY_COM_BCR>,
-			<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
-		reset-names = "phy", "common", "cfg";
-
-		pciephy_0: lane@35000 {
-			reg = <0x35000 0x130>,
-				<0x35200 0x200>,
-				<0x35400 0x1dc>;
-			#clock-cells = <0>;
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-			clock-names = "pipe0";
-			clock-output-names = "pcie_0_pipe_clk_src";
-			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
-			reset-names = "lane0";
-		};
-
-		pciephy_1: lane@36000 {
-		...
-		...
-	};
-
-	phy@88eb000 {
-		compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-		reg = <0x88eb000 0x18c>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-			 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-			 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-			 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-		clock-names = "aux", "cfg_ahb", "ref", "com_aux";
-
-		resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-			 <&gcc GCC_USB3_PHY_SEC_BCR>;
-		reset-names = "phy", "common";
-
-		lane@88eb200 {
-			reg = <0x88eb200 0x128>,
-			      <0x88eb400 0x1fc>,
-			      <0x88eb800 0x218>,
-			      <0x88eb600 0x70>;
-			#clock-cells = <0>;
-			#phy-cells = <0>;
-			clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-			clock-names = "pipe0";
-			clock-output-names = "usb3_uni_phy_pipe_clk_src";
-		};
-	};
-
-	phy@1d87000 {
-		compatible = "qcom,sdm845-qmp-ufs-phy";
-		reg = <0x1d87000 0x18c>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-names = "ref",
-			      "ref_aux";
-		clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-			 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-
-		lanes@1d87400 {
-			reg = <0x1d87400 0x108>,
-			      <0x1d87600 0x1e0>,
-			      <0x1d87c00 0x1dc>,
-			      <0x1d87800 0x108>,
-			      <0x1d87a00 0x1e0>;
-			#phy-cells = <0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
deleted file mode 100644
index fe29f9e0af6d..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-Qualcomm QUSB2 phy controller
-=============================
-
-QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
-
-Required properties:
- - compatible: compatible list, contains
-	       "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
-	       "qcom,msm8998-qusb2-phy" for 10nm PHY on msm8998,
-	       "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845.
-
- - reg: offset and length of the PHY register set.
- - #phy-cells: must be 0.
-
- - clocks: a list of phandles and clock-specifier pairs,
-	   one for each entry in clock-names.
- - clock-names: must be "cfg_ahb" for phy config clock,
-			"ref" for 19.2 MHz ref clk,
-			"iface" for phy interface clock (Optional).
-
- - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
- - vdda-phy-dpdm-supply: Phandle to 3.1V regulator supply to Dp/Dm port signals.
-
- - resets: Phandle to reset to phy block.
-
-Optional properties:
- - nvmem-cells: Phandle to nvmem cell that contains 'HS Tx trim'
-		tuning parameter value for qusb2 phy.
-
- - qcom,tcsr-syscon: Phandle to TCSR syscon register region.
- - qcom,imp-res-offset-value: It is a 6 bit value that specifies offset to be
-		added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY
-		tuning parameter that may vary for different boards of same SOC.
-		This property is applicable to only QUSB2 v2 PHY (sdm845).
- - qcom,hstx-trim-value: It is a 4 bit value that specifies tuning for HSTX
-		output current.
-		Possible range is - 15mA to 24mA (stepsize of 600 uA).
-		See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
-		This property is applicable to only QUSB2 v2 PHY (sdm845).
-		Default value is 22.2mA for sdm845.
- - qcom,preemphasis-level: It is a 2 bit value that specifies pre-emphasis level.
-		Possible range is 0 to 15% (stepsize of 5%).
-		See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
-		This property is applicable to only QUSB2 v2 PHY (sdm845).
-		Default value is 10% for sdm845.
-- qcom,preemphasis-width: It is a 1 bit value that specifies how long the HSTX
-		pre-emphasis (specified using qcom,preemphasis-level) must be in
-		effect. Duration could be half-bit of full-bit.
-		See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
-		This property is applicable to only QUSB2 v2 PHY (sdm845).
-		Default value is full-bit width for sdm845.
-
-Example:
-	hsusb_phy: phy@7411000 {
-		compatible = "qcom,msm8996-qusb2-phy";
-		reg = <0x7411000 0x180>;
-		#phy-cells = <0>;
-
-		clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-			<&gcc GCC_RX1_USB2_CLKREF_CLK>,
-		clock-names = "cfg_ahb", "ref";
-
-		vdda-pll-supply = <&pm8994_l12>;
-		vdda-phy-dpdm-supply = <&pm8994_l24>;
-
-		resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-		nvmem-cells = <&qusb2p_hstx_trim>;
-        };
diff --git a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml
new file mode 100644
index 000000000000..3e7191b168fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom-usb-ipq4019-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcom IPQ40xx Dakota HS/SS USB PHY
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-ss-ipq4019-phy
+      - qcom,usb-hs-ipq4019-phy
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: por_rst
+      - const: srif_rst
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+
+    hsphy@a8000 {
+      #phy-cells = <0>;
+      compatible = "qcom,usb-hs-ipq4019-phy";
+      reg = <0xa8000 0x40>;
+      resets = <&gcc USB2_HSPHY_POR_ARES>,
+               <&gcc USB2_HSPHY_S_ARES>;
+      reset-names = "por_rst", "srif_rst";
+    };
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
deleted file mode 100644
index ac96d6481bb8..000000000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-* Renesas R-Car generation 2 USB PHY
-
-This file provides information on what the device node for the R-Car generation
-2 USB PHY contains.
-
-Required properties:
-- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC.
-	      "renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC.
-	      "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC.
-	      "renesas,usb-phy-r8a77470" if the device is a part of R8A77470 SoC.
-	      "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
-	      "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
-	      "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
-	      "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 or
-					  RZ/G1 compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the register block.
-- #address-cells: number of address cells for the USB channel subnodes, must
-		  be <1>.
-- #size-cells: number of size cells for the USB channel subnodes, must be <0>.
-- clocks: clock phandle and specifier pair.
-- clock-names: string, clock input name, must be "usbhs".
-
-The USB PHY device tree node should have the subnodes corresponding to the USB
-channels. These subnodes must contain the following properties:
-- reg: the USB controller selector; see the table below for the values.
-- #phy-cells: see phy-bindings.txt in the same directory, must be <1>.
-
-The phandle's argument in the PHY specifier is the USB controller selector for
-the USB channel other than r8a77470 SoC; see the selector meanings below:
-
-+-----------+---------------+---------------+
-|\ Selector |               |               |
-+ --------- +       0       |       1       |
-| Channel  \|               |               |
-+-----------+---------------+---------------+
-| 0         | PCI EHCI/OHCI | HS-USB        |
-| 2         | PCI EHCI/OHCI | xHCI          |
-+-----------+---------------+---------------+
-
-For r8a77470 SoC;see the selector meaning below:
-
-+-----------+---------------+---------------+
-|\ Selector |               |               |
-+ --------- +       0       |       1       |
-| Channel  \|               |               |
-+-----------+---------------+---------------+
-| 0         | EHCI/OHCI     | HS-USB        |
-+-----------+---------------+---------------+
-
-Example (Lager board):
-
-	usb-phy@e6590100 {
-		compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy";
-		reg = <0 0xe6590100 0 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&cpg CPG_MOD 704>;
-		clock-names = "usbhs";
-		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-		resets = <&cpg 704>;
-
-		usb0: usb-channel@0 {
-			reg = <0>;
-			#phy-cells = <1>;
-		};
-		usb2: usb-channel@2 {
-			reg = <2>;
-			#phy-cells = <1>;
-		};
-	};
-
-Example (iWave RZ/G1C sbc):
-
-	usbphy0: usb-phy0@e6590100 {
-		compatible = "renesas,usb-phy-r8a77470",
-			     "renesas,rcar-gen2-usb-phy";
-		reg = <0 0xe6590100 0 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&cpg CPG_MOD 704>;
-		clock-names = "usbhs";
-		power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-		resets = <&cpg 704>;
-
-		usb0: usb-channel@0 {
-			reg = <0>;
-			#phy-cells = <1>;
-		};
-	};
-
-	usbphy1: usb-phy@e6598100 {
-		compatible = "renesas,usb-phy-r8a77470",
-			     "renesas,rcar-gen2-usb-phy";
-		reg = <0 0xe6598100 0 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&cpg CPG_MOD 706>;
-		clock-names = "usbhs";
-		power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-		resets = <&cpg 706>;
-
-		usb1: usb-channel@0 {
-			reg = <0>;
-			#phy-cells = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt
deleted file mode 100644
index 63853b35e083..000000000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Renesas R-Car generation 3 PCIe PHY
-
-This file provides information on what the device node for the R-Car
-generation 3 PCIe PHY contains.
-
-Required properties:
-- compatible: "renesas,r8a77980-pcie-phy" if the device is a part of the
-	      R8A77980 SoC.
-- reg: offset and length of the register block.
-- clocks: clock phandle and specifier pair.
-- power-domains: power domain phandle and specifier pair.
-- resets: reset phandle and specifier pair.
-- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
-
-Example (R-Car V3H):
-
-	pcie-phy@e65d0000 {
-		compatible = "renesas,r8a77980-pcie-phy";
-		reg = <0 0xe65d0000 0 0x8000>;
-		#phy-cells = <0>;
-		clocks = <&cpg CPG_MOD 319>;
-		power-domains = <&sysc 32>;
-		resets = <&cpg 319>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
deleted file mode 100644
index 7734b219d9aa..000000000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Renesas R-Car generation 3 USB 2.0 PHY
-
-This file provides information on what the device node for the R-Car generation
-3, RZ/G1C, RZ/G2 and RZ/A2 USB 2.0 PHY contain.
-
-Required properties:
-- compatible: "renesas,usb2-phy-r7s9210" if the device is a part of an R7S9210
-	      SoC.
-	      "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470
-	      SoC.
-	      "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
-	      SoC.
-	      "renesas,usb2-phy-r8a774b1" if the device is a part of an R8A774B1
-	      SoC.
-	      "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0
-	      SoC.
-	      "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
-	      SoC.
-	      "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
-	      SoC.
-	      "renesas,usb2-phy-r8a77965" if the device is a part of an
-	      R8A77965 SoC.
-	      "renesas,usb2-phy-r8a77990" if the device is a part of an
-	      R8A77990 SoC.
-	      "renesas,usb2-phy-r8a77995" if the device is a part of an
-	      R8A77995 SoC.
-	      "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3, RZ/G2 or
-	      RZ/A2 compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the partial USB 2.0 Host register block.
-- clocks: clock phandle and specifier pair(s).
-- #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and
-	      using <0> is deprecated).
-
-The phandle's argument in the PHY specifier is the INT_STATUS bit of controller:
-- 1 = USBH_INTA (OHCI)
-- 2 = USBH_INTB (EHCI)
-- 3 = UCOM_INT (OTG and BC)
-
-Optional properties:
-To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
-combined, the device tree node should set interrupt properties to use the
-channel as USB OTG:
-- interrupts: interrupt specifier for the PHY.
-- vbus-supply: Phandle to a regulator that provides power to the VBUS. This
-	       regulator will be managed during the PHY power on/off sequence.
-- renesas,no-otg-pins: boolean, specify when a board does not provide proper
-		       otg pins.
-- dr_mode: string, indicates the working mode for the PHY. Can be "host",
-           "peripheral", or "otg". Should be set if otg controller is not used.
-
-
-Example (R-Car H3):
-
-	usb-phy@ee080200 {
-		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
-		reg = <0 0xee080200 0 0x700>;
-		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 703>;
-	};
-
-	usb-phy@ee0a0200 {
-		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
-		reg = <0 0xee0a0200 0 0x700>;
-		clocks = <&cpg CPG_MOD 702>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
deleted file mode 100644
index 0fe433b9a592..000000000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Renesas R-Car generation 3 USB 3.0 PHY
-
-This file provides information on what the device node for the R-Car generation
-3 and RZ/G2 USB 3.0 PHY contain.
-If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
-instead of USB3_CLK. However, if you don't want to these features, you don't
-need this driver.
-
-Required properties:
-- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
-	      SoC.
-	      "renesas,r8a774b1-usb3-phy" if the device is a part of an R8A774B1
-	      SoC.
-	      "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
-	      SoC.
-	      "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
-	      SoC.
-	      "renesas,r8a77965-usb3-phy" if the device is a part of an
-	      R8A77965 SoC.
-	      "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2
-	      compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the USB 3.0 PHY register block.
-- clocks: A list of phandles and clock-specifier pairs.
-- clock-names: Name of the clocks.
-  - The funcional clock must be "usb3-if".
-  - The usb3's external clock must be "usb3s_clk".
-  - The usb2's external clock must be "usb_extal". If you want to use the ssc,
-    the clock-frequency must not be 0.
-- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
-
-Optional properties:
-- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using
-		     the following values as u32:
-			- 0 (or the property doesn't exist): disable the ssc
-			- 4980: enable the ssc as -4980 ppm
-			- 4492: enable the ssc as -4492 ppm
-			- 4003: enable the ssc as -4003 ppm
-
-Example (R-Car H3):
-
-	usb-phy@e65ee000 {
-		compatible = "renesas,r8a7795-usb3-phy",
-			     "renesas,rcar-gen3-usb3-phy";
-		reg = <0 0xe65ee000 0 0x90>;
-		clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
-		clock-names = "usb3-if", "usb3s_clk", "usb_extal";
-	};
diff --git a/Documentation/devicetree/bindings/phy/renesas,rcar-gen2-usb-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,rcar-gen2-usb-phy.yaml
new file mode 100644
index 000000000000..afc09f39b02b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,rcar-gen2-usb-phy.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,rcar-gen2-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen2 USB PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,usb-phy-r8a7742      # RZ/G1H
+          - renesas,usb-phy-r8a7743      # RZ/G1M
+          - renesas,usb-phy-r8a7744      # RZ/G1N
+          - renesas,usb-phy-r8a7745      # RZ/G1E
+          - renesas,usb-phy-r8a77470     # RZ/G1C
+          - renesas,usb-phy-r8a7790      # R-Car H2
+          - renesas,usb-phy-r8a7791      # R-Car M2-W
+          - renesas,usb-phy-r8a7794      # R-Car E2
+      - const: renesas,rcar-gen2-usb-phy # R-Car Gen2 or RZ/G1
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: usbhs
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^usb-phy@[02]$":
+    type: object
+    description: Subnode corresponding to a USB channel.
+
+    properties:
+      reg:
+        description: FIXME RZ/G1C supports channel 0 only
+        enum: [0, 2]
+
+      '#phy-cells':
+        description: |
+          The phandle's argument in the PHY specifier is the USB controller
+          selector for the USB channel.
+          For RZ/G1C:
+            - 0 for EHCI/OHCI
+            - 1 for HS-USB
+          For all other SoCS:
+            - 0 for PCI EHCI/OHCI
+            - 1 for HS-USB (channel 0) or xHCI (channel 2)
+        const: 1
+
+    required:
+      - reg
+      - '#phy-cells'
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - clocks
+  - clock-names
+  - resets
+  - power-domains
+  - usb-phy@0
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: renesas,usb-phy-r8a77470
+then:
+  properties:
+    usb-phy@2: false
+else:
+  required:
+    - usb-phy@2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+    usb-phy-controller@e6590100 {
+        compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy";
+        reg = <0xe6590100 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&cpg CPG_MOD 704>;
+        clock-names = "usbhs";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 704>;
+
+        usb0: usb-phy@0 {
+            reg = <0>;
+            #phy-cells = <1>;
+        };
+        usb2: usb-phy@2 {
+            reg = <2>;
+            #phy-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/renesas,rcar-gen3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,rcar-gen3-pcie-phy.yaml
new file mode 100644
index 000000000000..247ef7c47cf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,rcar-gen3-pcie-phy.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,rcar-gen3-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Generation 3 PCIe PHY
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+properties:
+  compatible:
+    const: renesas,r8a77980-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a77980-cpg-mssr.h>
+    #include <dt-bindings/power/r8a77980-sysc.h>
+
+    pcie-phy@e65d0000 {
+            compatible = "renesas,r8a77980-pcie-phy";
+            reg = <0xe65d0000 0x8000>;
+            #phy-cells = <0>;
+            clocks = <&cpg CPG_MOD 319>;
+            power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+            resets = <&cpg 319>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
new file mode 100644
index 000000000000..f82649a55e91
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car generation 3 USB 2.0 PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: renesas,usb2-phy-r8a77470 # RZ/G1C
+
+      - items:
+          - enum:
+              - renesas,usb2-phy-r7s9210  # RZ/A2
+              - renesas,usb2-phy-r8a774a1 # RZ/G2M
+              - renesas,usb2-phy-r8a774b1 # RZ/G2N
+              - renesas,usb2-phy-r8a774c0 # RZ/G2E
+              - renesas,usb2-phy-r8a774e1 # RZ/G2H
+              - renesas,usb2-phy-r8a7795  # R-Car H3
+              - renesas,usb2-phy-r8a7796  # R-Car M3-W
+              - renesas,usb2-phy-r8a77961 # R-Car M3-W+
+              - renesas,usb2-phy-r8a77965 # R-Car M3-N
+              - renesas,usb2-phy-r8a77990 # R-Car E3
+              - renesas,usb2-phy-r8a77995 # R-Car D3
+          - const: renesas,rcar-gen3-usb2-phy
+
+      - items:
+          - enum:
+              - renesas,usb2-phy-r9a07g043 # RZ/G2UL
+              - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC}
+              - renesas,usb2-phy-r9a07g054 # RZ/V2L
+          - const: renesas,rzg2l-usb2-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: fck
+      - const: usb_x1
+
+  '#phy-cells':
+    enum: [0, 1]  # and 0 is deprecated.
+    description: |
+      The phandle's argument in the PHY specifier is the INT_STATUS bit of
+      controller.
+      - 1 = USBH_INTA (OHCI)
+      - 2 = USBH_INTB (EHCI)
+      - 3 = UCOM_INT (OTG and BC)
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    items:
+      - description: reset of USB 2.0 host side
+      - description: reset of USB 2.0 peripheral side
+
+  vbus-supply:
+    description: |
+      Phandle to a regulator that provides power to the VBUS. This regulator
+      will be managed during the PHY power on/off sequence.
+
+  renesas,no-otg-pins:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      specify when a board does not provide proper otg pins.
+
+  dr_mode: true
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: renesas,usb2-phy-r7s9210
+then:
+  required:
+    - clock-names
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#phy-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rzg2l-usb2-phy
+    then:
+      required:
+        - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb-phy@ee080200 {
+        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
+        reg = <0xee080200 0x700>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 703>;
+        #phy-cells = <1>;
+    };
+
+    usb-phy@ee0a0200 {
+        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
+        reg = <0xee0a0200 0x700>;
+        clocks = <&cpg CPG_MOD 702>;
+        #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
new file mode 100644
index 000000000000..fe57c5373d18
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car generation 3 USB 3.0 PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-usb3-phy # RZ/G2M
+          - renesas,r8a774b1-usb3-phy # RZ/G2N
+          - renesas,r8a774e1-usb3-phy # RZ/G2H
+          - renesas,r8a7795-usb3-phy  # R-Car H3
+          - renesas,r8a7796-usb3-phy  # R-Car M3-W
+          - renesas,r8a77961-usb3-phy # R-Car M3-W+
+          - renesas,r8a77965-usb3-phy # R-Car M3-N
+      - const: renesas,rcar-gen3-usb3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    # If you want to use the ssc, the clock-frequency of usb_extal
+    # must not be 0.
+    minItems: 2
+    items:
+      - const: usb3-if # The functional clock
+      - const: usb3s_clk # The usb3's external clock
+      - const: usb_extal # The usb2's external clock
+
+  '#phy-cells':
+    # see phy-bindings.txt in the same directory
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,ssc-range:
+    description: |
+      Enable/disable spread spectrum clock (ssc). 0 or the property doesn't
+      exist means disabling the ssc. The actual value will be -<value> ppm.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 4003, 4492, 4980 ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb-phy@e65ee000 {
+        compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy";
+        reg = <0xe65ee000 0x90>;
+        clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
+        clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
new file mode 100644
index 000000000000..9f2d8d2cc7a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,pcie3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PCIe v3 phy
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-pcie3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: refclk_m
+      - const: refclk_n
+      - const: pclk
+
+  data-lanes:
+    description: which lanes (by position) should be mapped to which
+      controller (value). 0 means lane disabled, higher value means used.
+      (controller-number +1 )
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 16
+
+  "#phy-cells":
+    const: 0
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: phy
+
+  rockchip,phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the phy "general register files"
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the pipe "general register files"
+
+required:
+  - compatible
+  - reg
+  - rockchip,phy-grf
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    pcie30phy: phy@fe8c0000 {
+      compatible = "rockchip,rk3568-pcie3-phy";
+      reg = <0xfe8c0000 0x20000>;
+      #phy-cells = <0>;
+      clocks = <&pmucru CLK_PCIE30PHY_REF_M>,
+               <&pmucru CLK_PCIE30PHY_REF_N>,
+               <&cru PCLK_PCIE30PHY>;
+      clock-names = "refclk_m", "refclk_n", "pclk";
+      resets = <&cru SRST_PCIE30PHY>;
+      reset-names = "phy";
+      rockchip,phy-grf = <&pcie30_phy_grf>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
index 72aca81e8959..5c35e5ceec0b 100644
--- a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
@@ -18,6 +18,7 @@ properties:
       - rockchip,px30-dsi-dphy
       - rockchip,rk3128-dsi-dphy
       - rockchip,rk3368-dsi-dphy
+      - rockchip,rk3568-dsi-dphy
 
   reg:
     maxItems: 1
@@ -59,7 +60,7 @@ examples:
   - |
     dsi_dphy: phy@ff2e0000 {
         compatible = "rockchip,px30-dsi-dphy";
-        reg = <0x0 0xff2e0000 0x0 0x10000>;
+        reg = <0xff2e0000 0x10000>;
         clocks = <&pmucru 13>, <&cru 12>;
         clock-names = "ref", "pclk";
         resets = <&cru 12>;
diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
index e728786f21e0..57d28c0d5696 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
@@ -16,6 +16,11 @@ Optional properties:
  - drive-impedance-ohm: Specifies the drive impedance in Ohm.
                         Possible values are 33, 40, 50, 66 and 100.
                         If not set, the default value of 50 will be applied.
+ - rockchip,enable-strobe-pulldown: Enable internal pull-down for the strobe
+                                    line.  If not set, pull-down is not used.
+ - rockchip,output-tapdelay-select: Specifies the phyctrl_otapdlysec register.
+                                    If not set, the register defaults to 0x4.
+                                    Maximum value 0xf.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
new file mode 100644
index 000000000000..0e6505e9da50
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip-inno-csi-dphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC MIPI RX0 D-PHY
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP wich
+  connects to the ISP1 (Image Signal Processing unit v1.0) for CSI cameras.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-csi-dphy
+      - rockchip,rk1808-csi-dphy
+      - rockchip,rk3326-csi-dphy
+      - rockchip,rk3368-csi-dphy
+      - rockchip,rk3568-csi-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk
+
+  '#phy-cells':
+    const: 0
+
+  power-domains:
+    description: Video in/out power domain.
+    maxItems: 1
+
+  resets:
+    items:
+      - description: exclusive PHY reset line
+
+  reset-names:
+    items:
+      - const: apb
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional phy settings are access through GRF regs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+  - power-domains
+  - resets
+  - reset-names
+  - rockchip,grf
+
+additionalProperties: false
+
+examples:
+  - |
+
+    csi_dphy: phy@ff2f0000 {
+        compatible = "rockchip,px30-csi-dphy";
+        reg = <0xff2f0000 0x4000>;
+        clocks = <&cru 1>;
+        clock-names = "pclk";
+        #phy-cells = <0>;
+        power-domains = <&power 1>;
+        resets = <&cru 1>;
+        reset-names = "apb";
+        rockchip,grf = <&grf>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml b/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml
new file mode 100644
index 000000000000..5114e99b0035
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip-mipi-dphy-rx0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC MIPI RX0 D-PHY
+
+maintainers:
+  - Helen Koike <helen.koike@collabora.com>
+  - Ezequiel Garcia <ezequiel@collabora.com>
+
+description: |
+  The Rockchip SoC has a MIPI D-PHY bus with an RX0 entry which connects to
+  the ISP1 (Image Signal Processing unit v1.0) for CSI cameras.
+
+properties:
+  compatible:
+    const: rockchip,rk3399-mipi-dphy-rx0
+
+  clocks:
+    items:
+      - description: MIPI D-PHY ref clock
+      - description: MIPI D-PHY RX0 cfg clock
+      - description: Video in/out general register file clock
+
+  clock-names:
+    items:
+      - const: dphy-ref
+      - const: dphy-cfg
+      - const: grf
+
+  '#phy-cells':
+    const: 0
+
+  power-domains:
+    description: Video in/out power domain.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#phy-cells'
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+
+    /*
+     * MIPI D-PHY RX0 use registers in "general register files", it
+     * should be a child of the GRF.
+     *
+     * grf: syscon@ff770000 {
+     *  compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+     *  ...
+     * };
+     */
+
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/power/rk3399-power.h>
+
+    mipi_dphy_rx0: mipi-dphy-rx0 {
+        compatible = "rockchip,rk3399-mipi-dphy-rx0";
+        clocks = <&cru SCLK_MIPIDPHY_REF>,
+                 <&cru SCLK_DPHY_RX0_CFG>,
+                 <&cru PCLK_VIO_GRF>;
+        clock-names = "dphy-ref", "dphy-cfg", "grf";
+        power-domains = <&power RK3399_PD_VIO>;
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
deleted file mode 100644
index 4ed569046daf..000000000000
--- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-ROCKCHIP USB2 PHY
-
-Required properties:
- - compatible: matching the soc type, one of
-     "rockchip,rk3066a-usb-phy"
-     "rockchip,rk3188-usb-phy"
-     "rockchip,rk3288-usb-phy"
- - #address-cells: should be 1
- - #size-cells: should be 0
-
-Deprecated properties:
- - rockchip,grf : phandle to the syscon managing the "general
-   register files" - phy should be a child of the GRF instead
-
-Sub-nodes:
-Each PHY should be represented as a sub-node.
-
-Sub-nodes
-required properties:
-- #phy-cells: should be 0
-- reg: PHY configure reg address offset in GRF
-		"0x320" - for PHY attach to OTG controller
-		"0x334" - for PHY attach to HOST0 controller
-		"0x348" - for PHY attach to HOST1 controller
-
-Optional Properties:
-- clocks : phandle + clock specifier for the phy clocks
-- clock-names: string, clock name, must be "phyclk"
-- #clock-cells: for users of the phy-pll, should be 0
-- reset-names: Only allow the following entries:
- - phy-reset
-- resets: Must contain an entry for each entry in reset-names.
-- vbus-supply: power-supply phandle for vbus power source
-
-Example:
-
-grf: syscon@ff770000 {
-	compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
-
-...
-
-	usbphy: phy {
-		compatible = "rockchip,rk3288-usb-phy";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usb-phy0 {
-			#phy-cells = <0>;
-			reg = <0x320>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
new file mode 100644
index 000000000000..499d55131aa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USB2.0 phy
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3066a-usb-phy
+      - rockchip,rk3188-usb-phy
+      - rockchip,rk3288-usb-phy
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+patternProperties:
+  "usb-phy@[0-9a-f]+$":
+    type: object
+
+    properties:
+      reg:
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: phyclk
+
+      "#clock-cells":
+        const: 0
+
+      resets:
+        maxItems: 1
+
+      reset-names:
+        const: phy-reset
+
+      vbus-supply:
+        description: phandle for vbus power source
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+examples:
+  - |
+    usbphy: usbphy {
+      compatible = "rockchip,rk3288-usb-phy";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      usbphy0: usb-phy@320 {
+        reg = <0x320>;
+        #phy-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml
new file mode 100644
index 000000000000..b03b2f00cc5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,dp-video-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC DisplayPort PHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5250-dp-video-phy
+      - samsung,exynos5420-dp-video-phy
+
+  "#phy-cells":
+    const: 0
+
+  samsung,pmu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface.
+
+required:
+  - compatible
+  - "#phy-cells"
+  - samsung,pmu-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    phy {
+        compatible = "samsung,exynos5420-dp-video-phy";
+        samsung,pmu-syscon = <&pmu_system_controller>;
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml
new file mode 100644
index 000000000000..efc679c385ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,exynos-hdmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI PHY
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos4210-hdmiphy
+          - samsung,exynos4212-hdmiphy
+      - const: samsung,exynos5-hdmiphy
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi-phy@38 {
+            compatible = "samsung,exynos4210-hdmiphy";
+            reg = <0x38>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml
new file mode 100644
index 000000000000..28e299a9609d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,exynos-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series PCIe PHY
+
+maintainers:
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Jaehoon Chung <jh80.chung@samsung.com>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    const: samsung,exynos5433-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  samsung,pmu-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle for PMU system controller interface, used to
+                 control PMU registers bits for PCIe PHY
+
+  samsung,fsys-sysreg:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle for FSYS sysreg interface, used to control
+                 sysreg registers bits for PCIe PHY
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - samsung,pmu-syscon
+  - samsung,fsys-sysreg
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie_phy: pcie-phy@15680000 {
+        compatible = "samsung,exynos5433-pcie-phy";
+        reg = <0x15680000 0x1000>;
+        samsung,pmu-syscon = <&pmu_system_controller>;
+        samsung,fsys-sysreg = <&syscon_fsys>;
+        #phy-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml
new file mode 100644
index 000000000000..8751e559484f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,exynos5250-sata-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5250 SoC SATA PHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,exynos5250-sata-phy
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sata_phyctrl
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface.
+
+  samsung,exynos-sataphy-i2c-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to I2C SATA interface.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - reg
+  - samsung,syscon-phandle
+  - samsung,exynos-sataphy-i2c-phandle
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+
+    phy@12170000 {
+        compatible = "samsung,exynos5250-sata-phy";
+        reg = <0x12170000 0x1ff>;
+        clocks = <&clock CLK_SATA_PHYCTRL>;
+        clock-names = "sata_phyctrl";
+        #phy-cells = <0>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+        samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml
new file mode 100644
index 000000000000..415440aaad89
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,mipi-video-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC MIPI CSIS/DSIM DPHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  For samsung,s5pv210-mipi-video-phy compatible PHYs the second cell in the
+  PHY specifier identifies the PHY and its meaning is as follows::
+    0 - MIPI CSIS 0,
+    1 - MIPI DSIM 0,
+    2 - MIPI CSIS 1,
+    3 - MIPI DSIM 1.
+
+  samsung,exynos5420-mipi-video-phy and samsung,exynos5433-mipi-video-phy
+  support additional fifth PHY::
+    4 - MIPI CSIS 2.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-mipi-video-phy
+      - samsung,exynos5420-mipi-video-phy
+      - samsung,exynos5433-mipi-video-phy
+
+  "#phy-cells":
+    const: 1
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface, valid only for
+      samsung,s5pv210-mipi-video-phy and samsung,exynos5420-mipi-video-phy.
+
+  samsung,pmu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface, valid for
+      samsung,exynos5433-mipi-video-phy.
+
+  samsung,disp-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface, valid for
+      samsung,exynos5433-mipi-video-phy.
+
+  samsung,cam0-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to CAM0 system controller interface, valid for
+      samsung,exynos5433-mipi-video-phy.
+
+  samsung,cam1-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to CAM1 system controller interface, valid for
+      samsung,exynos5433-mipi-video-phy.
+
+required:
+  - compatible
+  - "#phy-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s5pv210-mipi-video-phy
+              - samsung,exynos5420-mipi-video-phy
+    then:
+      properties:
+        samsung,pmu-syscon: false
+        samsung,disp-sysreg: false
+        samsung,cam0-sysreg: false
+        samsung,cam1-sysreg: false
+      required:
+        - syscon
+    else:
+      properties:
+        syscon: false
+      required:
+        - samsung,pmu-syscon
+        - samsung,disp-sysreg
+        - samsung,cam0-sysreg
+        - samsung,cam1-sysreg
+
+additionalProperties: false
+
+examples:
+  - |
+    phy {
+        compatible = "samsung,exynos5433-mipi-video-phy";
+        #phy-cells = <1>;
+        samsung,pmu-syscon = <&pmu_system_controller>;
+        samsung,cam0-sysreg = <&syscon_cam0>;
+        samsung,cam1-sysreg = <&syscon_cam1>;
+        samsung,disp-sysreg = <&syscon_disp>;
+    };
+
+  - |
+    phy {
+        compatible = "samsung,s5pv210-mipi-video-phy";
+        syscon = <&pmu_system_controller>;
+        #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
new file mode 100644
index 000000000000..c5dbb91ac402
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,ufs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series UFS PHY
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - samsung,exynos7-ufs-phy
+      - samsung,exynosautov9-ufs-phy
+      - tesla,fsd-ufs-phy
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: phy-pma
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  samsung,pmu-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    items:
+      minItems: 1
+      items:
+        - description: phandle for PMU system controller interface, used to
+                       control pmu registers bits for ufs m-phy
+        - description: offset of the pmu control register
+    description:
+      It can be phandle/offset pair. The second cell which can represent an
+      offset is optional.
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - samsung,pmu-syscon
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-ufs-phy
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PLL reference clock
+            - description: symbol clock for input symbol (rx0-ch0 symbol clock)
+            - description: symbol clock for input symbol (rx1-ch1 symbol clock)
+            - description: symbol clock for output symbol (tx0 symbol clock)
+
+        clock-names:
+          items:
+            - const: ref_clk
+            - const: rx1_symbol_clk
+            - const: rx0_symbol_clk
+            - const: tx0_symbol_clk
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: PLL reference clock
+
+        clock-names:
+          items:
+            - const: ref_clk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    ufs_phy: ufs-phy@15571800 {
+        compatible = "samsung,exynos7-ufs-phy";
+        reg = <0x15571800 0x240>;
+        reg-names = "phy-pma";
+        samsung,pmu-syscon = <&pmu_system_controller>;
+        #phy-cells = <0>;
+        clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>,
+                 <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>,
+                 <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>,
+                 <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>;
+        clock-names = "ref_clk", "rx1_symbol_clk",
+                      "rx0_symbol_clk", "tx0_symbol_clk";
+
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml
new file mode 100644
index 000000000000..d9f22a801cbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC USB 2.0 PHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  The first phandle argument in the PHY specifier identifies the PHY, its
+  meaning is compatible dependent. For the currently supported SoCs (Exynos4210
+  and Exynos4212) it is as follows::
+    0 - USB device ("device"),
+    1 - USB host ("host"),
+    2 - HSIC0 ("hsic0"),
+    3 - HSIC1 ("hsic1"),
+  Exynos3250 has only USB device phy available as phy 0.
+
+  Exynos4210 and Exynos4212 use mode switching and require that mode switch
+  register is supplied.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos3250-usb2-phy
+      - samsung,exynos4210-usb2-phy
+      - samsung,exynos4x12-usb2-phy
+      - samsung,exynos5250-usb2-phy
+      - samsung,exynos5420-usb2-phy
+      - samsung,s5pv210-usb2-phy
+
+  clocks:
+    items:
+      - description: PHY module gate clock.
+      - description: Reference rate clock of PHY module.
+
+  clock-names:
+    items:
+      - const: phy
+      - const: ref
+
+  "#phy-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,pmureg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface.
+
+  samsung,sysreg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to system registers interface.
+
+  vbus-supply:
+    description:
+      VBUS power source.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - reg
+  - samsung,pmureg-phandle
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos4x12-usb2-phy
+              - samsung,exynos5250-usb2-phy
+              - samsung,exynos5420-usb2-phy
+    then:
+      required:
+        - samsung,sysreg-phandle
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+
+    phy@12130000 {
+        compatible = "samsung,exynos5420-usb2-phy";
+        reg = <0x12130000 0x100>;
+        #phy-cells = <1>;
+        clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+        clock-names = "phy", "ref";
+        samsung,sysreg-phandle = <&sysreg_system_controller>;
+        samsung,pmureg-phandle = <&pmu_system_controller>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
new file mode 100644
index 000000000000..5ba55f9f20cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,usb3-drd-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC USB 3.0 DRD PHY USB 2.0 PHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  For samsung,exynos5250-usbdrd-phy and samsung,exynos5420-usbdrd-phy
+  compatible PHYs, the second cell in the PHY specifier identifies the
+  PHY id, which is interpreted as follows::
+    0 - UTMI+ type phy,
+    1 - PIPE3 type phy.
+
+  For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers,
+  'usbdrd_phy' nodes should have numbered alias in the aliases node, in the
+  form of usbdrdphyN, N = 0, 1... (depending on number of controllers).
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5250-usbdrd-phy
+      - samsung,exynos5420-usbdrd-phy
+      - samsung,exynos5433-usbdrd-phy
+      - samsung,exynos7-usbdrd-phy
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    maxItems: 5
+    description: |
+      At least two clocks::
+        - Main PHY clock (same as USB DRD controller i.e. DWC3 IP clock), used
+          for register access.
+        - PHY reference clock (usually crystal clock), used for PHY operations,
+          associated by phy name. It is used to determine bit values for clock
+          settings register.  For Exynos5420 this is given as 'sclk_usbphy30'
+          in the CMU.
+
+  "#phy-cells":
+    const: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Any connector to the data bus of this controller should be modelled using
+      the OF graph bindings specified.
+
+  reg:
+    maxItems: 1
+
+  samsung,pmu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface.
+
+  vbus-supply:
+    description:
+      VBUS power source.
+
+  vbus-boost-supply:
+    description:
+      VBUS Boost 5V power source.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - reg
+  - samsung,pmu-syscon
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-usbdrd-phy
+              - samsung,exynos7-usbdrd-phy
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: phy
+            - const: ref
+            - const: phy_utmi
+            - const: phy_pipe
+            - const: itp
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: phy
+            - const: ref
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+
+    phy@12100000 {
+        compatible = "samsung,exynos5420-usbdrd-phy";
+        reg = <0x12100000 0x100>;
+        #phy-cells = <1>;
+        clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+        clock-names = "phy", "ref";
+        samsung,pmu-syscon = <&pmu_system_controller>;
+        vbus-supply = <&usb300_vbus_reg>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
deleted file mode 100644
index 7510830a79bd..000000000000
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ /dev/null
@@ -1,209 +0,0 @@
-Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY
--------------------------------------------------
-
-Required properties:
-- compatible : should be one of the listed compatibles:
-	- "samsung,s5pv210-mipi-video-phy"
-	- "samsung,exynos5420-mipi-video-phy"
-	- "samsung,exynos5433-mipi-video-phy"
-- #phy-cells : from the generic phy bindings, must be 1;
-
-In case of s5pv210 and exynos5420 compatible PHYs:
-- syscon - phandle to the PMU system controller
-
-In case of exynos5433 compatible PHY:
- - samsung,pmu-syscon - phandle to the PMU system controller
- - samsung,disp-sysreg - phandle to the DISP system registers controller
- - samsung,cam0-sysreg - phandle to the CAM0 system registers controller
- - samsung,cam1-sysreg - phandle to the CAM1 system registers controller
-
-For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
-the PHY specifier identifies the PHY and its meaning is as follows:
-  0 - MIPI CSIS 0,
-  1 - MIPI DSIM 0,
-  2 - MIPI CSIS 1,
-  3 - MIPI DSIM 1.
-"samsung,exynos5420-mipi-video-phy" and "samsung,exynos5433-mipi-video-phy"
-supports additional fifth PHY:
-  4 - MIPI CSIS 2.
-
-Samsung Exynos SoC series Display Port PHY
--------------------------------------------------
-
-Required properties:
-- compatible : should be one of the following supported values:
-	 - "samsung,exynos5250-dp-video-phy"
-	 - "samsung,exynos5420-dp-video-phy"
-- samsung,pmu-syscon: phandle for PMU system controller interface, used to
-		      control pmu registers for power isolation.
-- #phy-cells : from the generic PHY bindings, must be 0;
-
-Samsung S5P/Exynos SoC series USB PHY
--------------------------------------------------
-
-Required properties:
-- compatible : should be one of the listed compatibles:
-	- "samsung,exynos3250-usb2-phy"
-	- "samsung,exynos4210-usb2-phy"
-	- "samsung,exynos4x12-usb2-phy"
-	- "samsung,exynos5250-usb2-phy"
-	- "samsung,s5pv210-usb2-phy"
-- reg : a list of registers used by phy driver
-	- first and obligatory is the location of phy modules registers
-- samsung,sysreg-phandle - handle to syscon used to control the system registers
-- samsung,pmureg-phandle - handle to syscon used to control PMU registers
-- #phy-cells : from the generic phy bindings, must be 1;
-- clocks and clock-names:
-	- the "phy" clock is required by the phy module, used as a gate
-	- the "ref" clock is used to get the rate of the clock provided to the
-	  PHY module
-
-Optional properties:
-- vbus-supply: power-supply phandle for vbus power source
-
-The first phandle argument in the PHY specifier identifies the PHY, its
-meaning is compatible dependent. For the currently supported SoCs (Exynos 4210
-and Exynos 4212) it is as follows:
-  0 - USB device ("device"),
-  1 - USB host ("host"),
-  2 - HSIC0 ("hsic0"),
-  3 - HSIC1 ("hsic1"),
-Exynos3250 has only USB device phy available as phy 0.
-
-Exynos 4210 and Exynos 4212 use mode switching and require that mode switch
-register is supplied.
-
-Example:
-
-For Exynos 4412 (compatible with Exynos 4212):
-
-usbphy: phy@125b0000 {
-	compatible = "samsung,exynos4x12-usb2-phy";
-	reg = <0x125b0000 0x100>;
-	clocks = <&clock 305>, <&clock 2>;
-	clock-names = "phy", "ref";
-	#phy-cells = <1>;
-	samsung,sysreg-phandle = <&sys_reg>;
-	samsung,pmureg-phandle = <&pmu_reg>;
-};
-
-Then the PHY can be used in other nodes such as:
-
-phy-consumer@12340000 {
-	phys = <&usbphy 2>;
-	phy-names = "phy";
-};
-
-Refer to DT bindings documentation of particular PHY consumer devices for more
-information about required PHYs and the way of specification.
-
-Samsung SATA PHY Controller
----------------------------
-
-SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
-Each SATA PHY controller should have its own node.
-
-Required properties:
-- compatible        : compatible list, contains "samsung,exynos5250-sata-phy"
-- reg : offset and length of the SATA PHY register set;
-- #phy-cells : must be zero
-- clocks : must be exactly one entry
-- clock-names : must be "sata_phyctrl"
-- samsung,exynos-sataphy-i2c-phandle : a phandle to the I2C device, no arguments
-- samsung,syscon-phandle : a phandle to the PMU system controller, no arguments
-
-Example:
-	sata_phy: sata-phy@12170000 {
-		compatible = "samsung,exynos5250-sata-phy";
-		reg = <0x12170000 0x1ff>;
-		clocks = <&clock 287>;
-		clock-names = "sata_phyctrl";
-		#phy-cells = <0>;
-		samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
-		samsung,syscon-phandle = <&pmu_syscon>;
-	};
-
-Device-Tree bindings for sataphy i2c client driver
---------------------------------------------------
-
-Required properties:
-compatible: Should be "samsung,exynos-sataphy-i2c"
-- reg: I2C address of the sataphy i2c device.
-
-Example:
-
-	sata_phy_i2c:sata-phy@38 {
-		compatible = "samsung,exynos-sataphy-i2c";
-		reg = <0x38>;
-	};
-
-Samsung Exynos5 SoC series USB DRD PHY controller
---------------------------------------------------
-
-Required properties:
-- compatible : Should be set to one of the following supported values:
-	- "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC,
-	- "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC.
-	- "samsung,exynos5433-usbdrd-phy" - for exynos5433 SoC.
-	- "samsung,exynos7-usbdrd-phy" - for exynos7 SoC.
-- reg : Register offset and length of USB DRD PHY register set;
-- clocks: Clock IDs array as required by the controller
-- clock-names: names of clocks correseponding to IDs in the clock property;
-	       Required clocks:
-	- phy: main PHY clock (same as USB DRD controller i.e. DWC3 IP clock),
-	       used for register access.
-	- ref: PHY's reference clock (usually crystal clock), used for
-	       PHY operations, associated by phy name. It is used to
-	       determine bit values for clock settings register.
-	       For Exynos5420 this is given as 'sclk_usbphy30' in CMU.
-	- optional clocks: Exynos5433 & Exynos7 SoC has now following additional
-			   gate clocks available:
-			   - phy_pipe: for PIPE3 phy
-			   - phy_utmi: for UTMI+ phy
-			   - itp: for ITP generation
-- samsung,pmu-syscon: phandle for PMU system controller interface, used to
-		      control pmu registers for power isolation.
-- #phy-cells : from the generic PHY bindings, must be 1;
-
-For "samsung,exynos5250-usbdrd-phy" and "samsung,exynos5420-usbdrd-phy"
-compatible PHYs, the second cell in the PHY specifier identifies the
-PHY id, which is interpreted as follows:
-  0 - UTMI+ type phy,
-  1 - PIPE3 type phy,
-
-Example:
-	usbdrd_phy: usbphy@12100000 {
-		compatible = "samsung,exynos5250-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock 286>, <&clock 1>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
-
-- aliases: For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers,
-	   'usbdrd_phy' nodes should have numbered alias in the aliases node,
-	   in the form of usbdrdphyN, N = 0, 1... (depending on number of
-	   controllers).
-Example:
-	aliases {
-		usbdrdphy0 = &usb3_phy0;
-		usbdrdphy1 = &usb3_phy1;
-	};
-
-Samsung Exynos SoC series PCIe PHY controller
---------------------------------------------------
-Required properties:
-- compatible : Should be set to "samsung,exynos5440-pcie-phy"
-- #phy-cells : Must be zero
-- reg : a register used by phy driver.
-	- First is for phy register, second is for block register.
-- reg-names : Must be set to "phy" and "block".
-
-Example:
-	pcie_phy0: pcie-phy@270000 {
-		#phy-cells = <0>;
-		compatible = "samsung,exynos5440-pcie-phy";
-		reg = <0x270000 0x1000>, <0x271000 0x40>;
-		reg-names = "phy", "block";
-	};
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
new file mode 100644
index 000000000000..a3cd45acea28
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-ahci-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier AHCI PHY
+
+description: |
+  This describes the deivcetree bindings for PHY interfaces built into
+  AHCI controller implemented on Socionext UniPhier SoCs.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-ahci-phy
+      - socionext,uniphier-pxs2-ahci-phy
+      - socionext,uniphier-pxs3-ahci-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names: true
+
+  resets:
+    minItems: 2
+    maxItems: 6
+
+  reset-names: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro4-ahci-phy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: link
+            - const: gio
+        resets:
+          minItems: 6
+          maxItems: 6
+        reset-names:
+          items:
+            - const: link
+            - const: gio
+            - const: phy
+            - const: pm
+            - const: tx
+            - const: rx
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pxs2-ahci-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pxs3-ahci-phy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: link
+            - const: phy
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    ahci-glue@65700000 {
+        compatible = "socionext,uniphier-pxs3-ahci-glue",
+                     "simple-mfd";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65700000 0x100>;
+
+        ahci_phy: phy@10 {
+            compatible = "socionext,uniphier-pxs3-ahci-phy";
+            reg = <0x10 0x10>;
+            #phy-cells = <0>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 28>, <&sys_clk 30>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 28>, <&sys_rst 30>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
new file mode 100644
index 000000000000..b3ed2f74a414
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe PHY
+
+description: |
+  This describes the devicetree bindings for PHY interface built into
+  PCIe controller implemented on Socionext UniPhier SoCs.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro5-pcie-phy
+      - socionext,uniphier-ld20-pcie-phy
+      - socionext,uniphier-pxs3-pcie-phy
+      - socionext,uniphier-nx1-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names: true
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names: true
+
+  socionext,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to system control to set configurations for phy
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro5-pcie-phy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie_phy: phy@66038000 {
+        compatible = "socionext,uniphier-ld20-pcie-phy";
+        reg = <0x66038000 0x4000>;
+        #phy-cells = <0>;
+        clock-names = "link";
+        clocks = <&sys_clk 24>;
+        reset-names = "link";
+        resets = <&sys_rst 24>;
+        socionext,syscon = <&soc_glue>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
new file mode 100644
index 000000000000..63dab914a48d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier USB2 PHY
+
+description: |
+  This describes the devicetree bindings for PHY interface built into
+  USB2 controller implemented on Socionext UniPhier SoCs.
+  Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3
+  controller doesn't include its own High-Speed PHY. This needs to specify
+  USB2 PHY instead of USB3 HS-PHY.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-usb2-phy
+      - socionext,uniphier-ld11-usb2-phy
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^phy@[0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+        description:
+          The ID number for the PHY
+
+      "#phy-cells":
+        const: 0
+
+      vbus-supply:
+        description: A phandle to the regulator for USB VBUS, only for USB host
+
+    required:
+      - reg
+      - "#phy-cells"
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    // The UniPhier usb2-phy should be a subnode of a "syscon" compatible node.
+
+    soc-glue@5f800000 {
+        compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon";
+        reg = <0x5f800000 0x2000>;
+
+        usb-controller {
+            compatible = "socionext,uniphier-ld11-usb2-phy";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            usb_phy0: phy@0 {
+                reg = <0>;
+                #phy-cells = <0>;
+            };
+
+            usb_phy1: phy@1 {
+                reg = <1>;
+                #phy-cells = <0>;
+            };
+
+            usb_phy2: phy@2 {
+                reg = <2>;
+                #phy-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
new file mode 100644
index 000000000000..21e4414eea60
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3hs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier USB3 High-Speed (HS) PHY
+
+description: |
+  This describes the devicetree bindings for PHY interfaces built into
+  USB3 controller implemented on Socionext UniPhier SoCs.
+  Although the controller includes High-Speed PHY and Super-Speed PHY,
+  this describes about High-Speed PHY.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro5-usb3-hsphy
+      - socionext,uniphier-pxs2-usb3-hsphy
+      - socionext,uniphier-ld20-usb3-hsphy
+      - socionext,uniphier-pxs3-usb3-hsphy
+      - socionext,uniphier-nx1-usb3-hsphy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names: true
+
+  resets:
+    maxItems: 2
+
+  reset-names: true
+
+  vbus-supply:
+    description: A phandle to the regulator for USB VBUS
+
+  nvmem-cells:
+    maxItems: 3
+    description:
+      Phandles to nvmem cell that contains the trimming data.
+      Available only for HS-PHY implemented on LD20 and PXs3, and
+      if unspecified, default value is used.
+
+  nvmem-cell-names:
+    items:
+      - const: rterm
+      - const: sel_t
+      - const: hs_i
+    description:
+      Should be the following names, which correspond to each nvmem-cells.
+      All of the 3 parameters associated with the above names are
+      required for each port, if any one is omitted, the trimming data
+      of the port will not be set at all.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro5-usb3-hsphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pxs2-usb3-hsphy
+              - socionext,uniphier-ld20-usb3-hsphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: link
+            - const: phy
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pxs3-usb3-hsphy
+              - socionext,uniphier-nx1-usb3-hsphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          items:
+            - const: link
+            - const: phy
+            - const: phy-ext
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-glue@65b00000 {
+        compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65b00000 0x400>;
+
+        usb_hsphy0: hs-phy@200 {
+            compatible = "socionext,uniphier-ld20-usb3-hsphy";
+            reg = <0x200 0x10>;
+            #phy-cells = <0>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 14>, <&sys_clk 16>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 14>, <&sys_rst 16>;
+            vbus-supply = <&usb_vbus0>;
+            nvmem-cell-names = "rterm", "sel_t", "hs_i";
+            nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
new file mode 100644
index 000000000000..4c26d2d2303d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3ss-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier USB3 Super-Speed (SS) PHY
+
+description: |
+  This describes the devicetree bindings for PHY interfaces built into
+  USB3 controller implemented on Socionext UniPhier SoCs.
+  Although the controller includes High-Speed PHY and Super-Speed PHY,
+  this describes about Super-Speed PHY.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-usb3-ssphy
+      - socionext,uniphier-pro5-usb3-ssphy
+      - socionext,uniphier-pxs2-usb3-ssphy
+      - socionext,uniphier-ld20-usb3-ssphy
+      - socionext,uniphier-pxs3-usb3-ssphy
+      - socionext,uniphier-nx1-usb3-ssphy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names: true
+
+  resets:
+    maxItems: 2
+
+  reset-names: true
+
+  vbus-supply:
+    description: A phandle to the regulator for USB VBUS, only for USB host
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pro4-usb3-ssphy
+              - socionext,uniphier-pro5-usb3-ssphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pxs2-usb3-ssphy
+              - socionext,uniphier-ld20-usb3-ssphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: link
+            - const: phy
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pxs3-usb3-ssphy
+              - socionext,uniphier-nx1-usb3-ssphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          items:
+            - const: link
+            - const: phy
+            - const: phy-ext
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-glue@65b00000 {
+        compatible = "socionext,uniphier-ld20-dwc3-glue",
+                     "simple-mfd";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65b00000 0x400>;
+
+        usb_ssphy0: ss-phy@300 {
+            compatible = "socionext,uniphier-ld20-usb3-ssphy";
+            reg = <0x300 0x10>;
+            #phy-cells = <0>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 14>, <&sys_clk 16>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 14>, <&sys_rst 16>;
+            vbus-supply = <&usb_vbus0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/sunplus,sp7021-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/sunplus,sp7021-usb2-phy.yaml
new file mode 100644
index 000000000000..069d422775bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/sunplus,sp7021-usb2-phy.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/sunplus,sp7021-usb2-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Sunplus SP7021 USB 2.0 PHY Controller
+
+maintainers:
+  - Vincent Shih <vincent.sunplus@gmail.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-usb2-phy
+
+  reg:
+    items:
+      - description: UPHY register region
+      - description: MOON4 register region
+
+  reg-names:
+    items:
+      - const: phy
+      - const: moon4
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  nvmem-cell-names:
+    description: names corresponding to the nvmem cells of disconnect voltage
+    const: disc_vol
+
+  nvmem-cells:
+    description: nvmem cell address of disconnect voltage
+    maxItems: 1
+
+  sunplus,disc-vol-addr-off:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the otp address offset of disconnect voltage
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - "#phy-cells"
+  - nvmem-cell-names
+  - nvmem-cells
+  - sunplus,disc-vol-addr-off
+
+additionalProperties: false
+
+examples:
+  - |
+    sp_uphy0: usb-phy@9c004a80 {
+      compatible = "sunplus,sp7021-usb2-phy";
+      reg = <0x9c004a80 0x80>, <0x9c000248 0x10>;
+      reg-names = "phy", "moon4";
+      clocks = <&clkc 0x3d>;
+      resets = <&rstc 0x2d>;
+      #phy-cells = <0>;
+      nvmem-cell-names = "disc_vol";
+      nvmem-cells = <&disc_vol>;
+      sunplus,disc-vol-addr-off = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
new file mode 100644
index 000000000000..8694b9eb52f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,omap-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP USB2 PHY
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,dra7x-usb2
+              - ti,dra7x-usb2-phy2
+              - ti,am654-usb2
+          - enum:
+              - ti,omap-usb2
+      - items:
+          - const: ti,am437x-usb2
+      - items:
+          - const: ti,omap-usb2
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 1
+    items:
+      - description: wakeup clock
+      - description: reference clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: wkupclk
+      - const: refclk
+
+  syscon-phy-power:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the system control module
+          - description: register offset to power on/off the PHY
+    description:
+      phandle/offset pair. Phandle to the system control module and
+      register offset to power on/off the PHY.
+
+  ctrl-module:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      (deprecated) phandle of the control module used by PHY driver
+      to power on the PHY. Use syscon-phy-power instead.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    usb0_phy: phy@4100000 {
+      compatible = "ti,am654-usb2", "ti,omap-usb2";
+      reg = <0x4100000 0x54>;
+      syscon-phy-power = <&scm_conf 0x4000>;
+      clocks = <&k3_clks 151 0>, <&k3_clks 151 1>;
+      clock-names = "wkupclk", "refclk";
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt
deleted file mode 100644
index 64b286d2d398..000000000000
--- a/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-TI AM654 SERDES
-
-Required properties:
- - compatible: Should be "ti,phy-am654-serdes"
- - reg : Address and length of the register set for the device.
- - #phy-cells: determine the number of cells that should be given in the
-	phandle while referencing this phy. Should be "2". The 1st cell
-	corresponds to the phy type (should be one of the types specified in
-	include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes
-	lane function.
-	If SERDES0 is referenced 2nd cell should be:
-		0 - USB3
-		1 - PCIe0 Lane0
-		2 - ICSS2 SGMII Lane0
-	If SERDES1 is referenced 2nd cell should be:
-		0 - PCIe1 Lane0
-		1 - PCIe0 Lane1
-		2 - ICSS2 SGMII Lane1
- - power-domains: As documented by the generic PM domain bindings in
-	Documentation/devicetree/bindings/power/power_domain.txt.
- - clocks: List of clock-specifiers representing the input to the SERDES.
-	Should have 3 items representing the left input clock, external
-	reference clock and right input clock in that order.
- - clock-output-names: List of clock names for each of the clock outputs of
-	SERDES. Should have 3 items for CMU reference clock,
-	left output clock and right output clock in that order.
- - assigned-clocks: As defined in
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
- - assigned-clock-parents: As defined in
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
- - #clock-cells: Should be <1> to choose between the 3 output clocks.
-	Defined in Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-   The following macros are defined in dt-bindings/phy/phy-am654-serdes.h
-   for selecting the correct reference clock. This can be used while
-   specifying the clocks created by SERDES.
-	=> AM654_SERDES_CMU_REFCLK
-	=> AM654_SERDES_LO_REFCLK
-	=> AM654_SERDES_RO_REFCLK
-
- - mux-controls: Phandle to the multiplexer that is used to select the lane
-	function. See #phy-cells above to see the multiplex values.
-
-Example:
-
-Example for SERDES0 is given below. It has 3 clock inputs;
-left input reference clock as indicated by <&k3_clks 153 4>, external
-reference clock as indicated by <&k3_clks 153 1> and right input
-reference clock as indicated by <&serdes1 AM654_SERDES_LO_REFCLK>. (The
-right input of SERDES0 is connected to the left output of SERDES1).
-
-SERDES0 registers 3 clock outputs as indicated in clock-output-names. The
-first refers to the CMU reference clock, second refers to the left output
-reference clock and the third refers to the right output reference clock.
-
-The assigned-clocks and assigned-clock-parents is used here to set the
-parent of left input reference clock to MAINHSDIV_CLKOUT4 and parent of
-CMU reference clock to left input reference clock.
-
-serdes0: serdes@900000 {
-	compatible = "ti,phy-am654-serdes";
-	reg = <0x0 0x900000 0x0 0x2000>;
-	reg-names = "serdes";
-	#phy-cells = <2>;
-	power-domains = <&k3_pds 153>;
-	clocks = <&k3_clks 153 4>, <&k3_clks 153 1>,
-			<&serdes1 AM654_SERDES_LO_REFCLK>;
-	clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk",
-				"serdes0_ro_refclk";
-	assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
-	assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
-	ti,serdes-clk = <&serdes0_clk>;
-	mux-controls = <&serdes_mux 0>;
-	#clock-cells = <1>;
-};
-
-Example for PCIe consumer node using the SERDES PHY specifier is given below.
-&pcie0_rc {
-        num-lanes = <2>;
-        phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>;
-        phy-names = "pcie-phy0", "pcie-phy1";
-};
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.yaml b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.yaml
new file mode 100644
index 000000000000..62dcb84c08aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,phy-am654-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM654 SERDES binding
+
+description:
+  This binding describes the TI AM654 SERDES. AM654 SERDES can be configured
+  to be used with either PCIe or USB or SGMII.
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,phy-am654-serdes
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: serdes
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description:
+      Three input clocks referring to left input reference clock, refclk and right input reference
+      clock.
+
+  assigned-clocks:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+  assigned-clock-parents:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+
+  '#phy-cells':
+    const: 2
+    description:
+      The 1st cell corresponds to the phy type (should be one of the types specified in
+      include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes lane function.
+
+  ti,serdes-clk:
+    description: Phandle to the SYSCON entry required for configuring SERDES clock selection.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#clock-cells':
+    const: 1
+
+  mux-controls:
+    maxItems: 1
+    description: Phandle to the SYSCON entry required for configuring SERDES lane function.
+
+  clock-output-names:
+    oneOf:
+      - description: Clock output names for SERDES 0
+        items:
+          - const: serdes0_cmu_refclk
+          - const: serdes0_lo_refclk
+          - const: serdes0_ro_refclk
+      - description: Clock output names for SERDES 1
+        items:
+          - const: serdes1_cmu_refclk
+          - const: serdes1_lo_refclk
+          - const: serdes1_ro_refclk
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - assigned-clocks
+  - assigned-clock-parents
+  - ti,serdes-clk
+  - mux-controls
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy-am654-serdes.h>
+
+    serdes0: serdes@900000 {
+      compatible = "ti,phy-am654-serdes";
+      reg = <0x900000 0x2000>;
+      reg-names = "serdes";
+      #phy-cells = <2>;
+      power-domains = <&k3_pds 153>;
+      clocks = <&k3_clks 153 4>, <&k3_clks 153 1>,
+               <&serdes1 AM654_SERDES_LO_REFCLK>;
+      clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
+      assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+      assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+      ti,serdes-clk = <&serdes0_clk>;
+      mux-controls = <&serdes_mux 0>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
new file mode 100644
index 000000000000..da7cac537e15
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/ti,phy-gmii-sel.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: CPSW Port's Interface Mode Selection PHY Tree Bindings
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+description: |
+  TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports
+  two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces.
+  The interface mode is selected by configuring the MII mode selection register(s)
+  (GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and
+  bit fields placement in SCM are different between SoCs while fields meaning
+  is the same.
+                                               +--------------+
+        +-------------------------------+      |SCM           |
+        |                     CPSW      |      |  +---------+ |
+        |        +--------------------------------+gmii_sel | |
+        |        |                      |      |  +---------+ |
+        |   +----v---+     +--------+   |      +--------------+
+        |   |Port 1..<--+-->GMII/MII<------->
+        |   |        |  |  |        |   |
+        |   +--------+  |  +--------+   |
+        |               |               |
+        |               |  +--------+   |
+        |               |  | RMII   <------->
+        |               +-->        |   |
+        |               |  +--------+   |
+        |               |               |
+        |               |  +--------+   |
+        |               |  | RGMII  <------->
+        |               +-->        |   |
+        |                  +--------+   |
+        +-------------------------------+
+
+  CPSW Port's Interface Mode Selection PHY describes MII interface mode between
+  CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration.
+  |
+  CPSW Port's Interface Mode Selection PHY device should defined as child device
+  of SCM node (scm_conf) and can be attached to each CPSW port node using standard
+  PHY bindings.
+
+properties:
+  compatible:
+    enum:
+      - ti,am3352-phy-gmii-sel
+      - ti,dra7xx-phy-gmii-sel
+      - ti,am43xx-phy-gmii-sel
+      - ti,dm814-phy-gmii-sel
+      - ti,am654-phy-gmii-sel
+      - ti,j7200-cpsw5g-phy-gmii-sel
+
+  reg:
+    maxItems: 1
+
+  '#phy-cells': true
+
+  ti,qsgmii-main-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Required only for QSGMII mode. Array to select the port for
+      QSGMII main mode. Rest of the ports are selected as QSGMII_SUB
+      ports automatically. Any one of the 4 CPSW5G ports can act as the
+      main port with the rest of them being the QSGMII_SUB ports.
+    maxItems: 1
+    items:
+      minimum: 1
+      maximum: 4
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,dra7xx-phy-gmii-sel
+              - ti,dm814-phy-gmii-sel
+              - ti,am654-phy-gmii-sel
+    then:
+      properties:
+        '#phy-cells':
+          const: 1
+          description: CPSW port number (starting from 1)
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ti,j7200-cpsw5g-phy-gmii-sel
+    then:
+      properties:
+        ti,qsgmii-main-ports: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,am3352-phy-gmii-sel
+              - ti,am43xx-phy-gmii-sel
+    then:
+      properties:
+        '#phy-cells':
+          const: 2
+          description: |
+            - CPSW port number (starting from 1)
+            - RMII refclk mode
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    phy_gmii_sel: phy@650 {
+        compatible = "ti,am3352-phy-gmii-sel";
+        reg = <0x650 0x4>;
+        #phy-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
index 452cee1aed32..2225925b6dad 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -15,19 +15,24 @@ properties:
     enum:
       - ti,j721e-wiz-16g
       - ti,j721e-wiz-10g
+      - ti,am64-wiz-10g
+      - ti,j7200-wiz-10g
 
   power-domains:
     maxItems: 1
 
   clocks:
-    maxItems: 3
+    minItems: 3
+    maxItems: 4
     description: clock-specifier to represent input to the WIZ
 
   clock-names:
+    minItems: 3
     items:
       - const: fck
       - const: core_ref_clk
       - const: ext_ref_clk
+      - const: core_ref1_clk
 
   num-lanes:
     minimum: 1
@@ -42,12 +47,21 @@ properties:
   "#reset-cells":
     const: 1
 
+  "#clock-cells":
+    const: 1
+
   ranges: true
 
   assigned-clocks:
+    minItems: 1
     maxItems: 2
 
   assigned-clock-parents:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clock-rates:
+    minItems: 1
     maxItems: 2
 
   typec-dir-gpios:
@@ -67,12 +81,49 @@ properties:
       Type-C spec states minimum CC pin debounce of 100 ms and maximum
       of 200 ms. However, some solutions might need more than 200 ms.
 
+  refclk-dig:
+    type: object
+    additionalProperties: false
+    description: |
+      WIZ node should have subnode for refclk_dig to select the reference
+      clock source for the reference clock used in the PHY and PMA digital
+      logic.
+    deprecated: true
+    properties:
+      clocks:
+        minItems: 2
+        maxItems: 4
+        description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
+          the inputs to refclk_dig
+
+      "#clock-cells":
+        const: 0
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+    required:
+      - clocks
+      - "#clock-cells"
+      - assigned-clocks
+      - assigned-clock-parents
+
+  ti,scm:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to System Control Module for syscon regmap access.
+
 patternProperties:
   "^pll[0|1]-refclk$":
     type: object
+    additionalProperties: false
     description: |
       WIZ node should have subnodes for each of the PLLs present in
       the SERDES.
+    deprecated: true
     properties:
       clocks:
         maxItems: 2
@@ -95,9 +146,11 @@ patternProperties:
 
   "^cmn-refclk1?-dig-div$":
     type: object
+    additionalProperties: false
     description:
       WIZ node should have subnodes for each of the PMA common refclock
       provided by the SERDES.
+    deprecated: true
     properties:
       clocks:
         maxItems: 1
@@ -111,42 +164,15 @@ patternProperties:
       - clocks
       - "#clock-cells"
 
-  "^refclk-dig$":
-    type: object
-    description: |
-      WIZ node should have subnode for refclk_dig to select the reference
-      clock source for the reference clock used in the PHY and PMA digital
-      logic.
-    properties:
-      clocks:
-        maxItems: 4
-        description: Phandle to four clock nodes representing the inputs to
-          refclk_dig
-
-      "#clock-cells":
-        const: 0
-
-      assigned-clocks:
-        maxItems: 1
-
-      assigned-clock-parents:
-        maxItems: 1
-
-    required:
-      - clocks
-      - "#clock-cells"
-      - assigned-clocks
-      - assigned-clock-parents
-
   "^serdes@[0-9a-f]+$":
     type: object
     description: |
       WIZ node should have '1' subnode for the SERDES. It could be either
       Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the
       bindings specified in
-      Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
+      Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
       Torrent SERDES should follow the bindings specified in
-      Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
+      Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
 
 required:
   - compatible
@@ -159,6 +185,18 @@ required:
   - "#reset-cells"
   - ranges
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j7200-wiz-10g
+    then:
+      required:
+        - ti,scm
+
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
@@ -201,14 +239,15 @@ examples:
            };
 
            refclk-dig {
-                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>,
+                          <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
                   #clock-cells = <0>;
                   assigned-clocks = <&wiz0_refclk_dig>;
                   assigned-clock-parents = <&k3_clks 292 11>;
            };
 
            serdes@5000000 {
-                  compatible = "cdns,ti,sierra-phy-t0";
+                  compatible = "ti,sierra-phy-t0";
                   reg-names = "serdes";
                   reg = <0x5000000 0x10000>;
                   #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
new file mode 100644
index 000000000000..02b76f15e717
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/ti,tcan104x-can.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TCAN104x CAN TRANSCEIVER PHY
+
+maintainers:
+  - Aswath Govindraju <a-govindraju@ti.com>
+
+properties:
+  $nodename:
+    pattern: "^can-phy"
+
+  compatible:
+    enum:
+      - ti,tcan1042
+      - ti,tcan1043
+
+  '#phy-cells':
+    const: 0
+
+  standby-gpios:
+    description:
+      gpio node to toggle standby signal on transceiver
+    maxItems: 1
+
+  enable-gpios:
+    description:
+      gpio node to toggle enable signal on transceiver
+    maxItems: 1
+
+  max-bitrate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      max bit rate supported in bps
+    minimum: 1
+
+  mux-states:
+    description:
+      mux controller node to route the signals from controller to
+      transceiver.
+    maxItems: 1
+
+required:
+  - compatible
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    transceiver1: can-phy {
+      compatible = "ti,tcan1043";
+      #phy-cells = <0>;
+      max-bitrate = <5000000>;
+      standby-gpios = <&wakeup_gpio1 16 GPIO_ACTIVE_LOW>;
+      enable-gpios = <&main_gpio1 67 GPIO_ACTIVE_HIGH>;
+      mux-states = <&mux0 1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt
deleted file mode 100644
index 50ce9ae0f7a5..000000000000
--- a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-CPSW Port's Interface Mode Selection PHY Tree Bindings
------------------------------------------------
-
-TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports
-two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces.
-The interface mode is selected by configuring the MII mode selection register(s)
-(GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and
-bit fields placement in SCM are different between SoCs while fields meaning
-is the same.
-                                               +--------------+
-        +-------------------------------+      |SCM           |
-        |                     CPSW      |      |  +---------+ |
-        |        +--------------------------------+gmii_sel | |
-        |        |                      |      |  +---------+ |
-        |   +----v---+     +--------+   |      +--------------+
-        |   |Port 1..<--+-->GMII/MII<------->
-        |   |        |  |  |        |   |
-        |   +--------+  |  +--------+   |
-        |               |               |
-        |               |  +--------+   |
-        |               |  | RMII   <------->
-        |               +-->        |   |
-        |               |  +--------+   |
-        |               |               |
-        |               |  +--------+   |
-        |               |  | RGMII  <------->
-        |               +-->        |   |
-        |                  +--------+   |
-        +-------------------------------+
-
-CPSW Port's Interface Mode Selection PHY describes MII interface mode between
-CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration.
-
-CPSW Port's Interface Mode Selection PHY device should defined as child device
-of SCM node (scm_conf) and can be attached to each CPSW port node using standard
-PHY bindings (See phy/phy-bindings.txt).
-
-Required properties:
-- compatible		: Should be "ti,am3352-phy-gmii-sel" for am335x platform
-			  "ti,dra7xx-phy-gmii-sel" for dra7xx/am57xx platform
-			  "ti,am43xx-phy-gmii-sel" for am43xx platform
-			  "ti,dm814-phy-gmii-sel" for dm814x platform
-- reg			: Address and length of the register set for the device
-- #phy-cells		: must be 2.
-			  cell 1 - CPSW port number (starting from 1)
-			  cell 2 - RMII refclk mode
-
-Examples:
-	phy_gmii_sel: phy-gmii-sel {
-		compatible = "ti,am3352-phy-gmii-sel";
-		reg = <0x650 0x4>;
-		#phy-cells = <2>;
-	};
-
-	mac: ethernet@4a100000 {
-		compatible = "ti,am335x-cpsw","ti,cpsw";
-		...
-
-		cpsw_emac0: slave@4a100200 {
-			...
-			phys = <&phy_gmii_sel 1 1>;
-		};
-
-		cpsw_emac1: slave@4a100300 {
-			...
-			phys = <&phy_gmii_sel 2 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 8f93c3b694a7..60c9d0ac75e6 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -27,43 +27,6 @@ omap_control_usb: omap-control-usb@4a002300 {
         reg-names = "otghs_control";
 };
 
-OMAP USB2 PHY
-
-Required properties:
- - compatible: Should be "ti,omap-usb2"
-	       Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on
-	       DRA7x
-	       Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
-	       in DRA7x
-	       Should be "ti,am654-usb2" for the USB2 PHYs on AM654.
- - reg : Address and length of the register set for the device.
- - #phy-cells: determine the number of cells that should be given in the
-   phandle while referencing this phy.
- - clocks: a list of phandles and clock-specifier pairs, one for each entry in
-   clock-names.
- - clock-names: should include:
-   * "wkupclk" - wakeup clock.
-   * "refclk" - reference clock (optional).
-
-Deprecated properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
-   the PHY.
-
-Recommended properies:
-- syscon-phy-power : phandle/offset pair. Phandle to the system control
-  module and the register offset to power on/off the PHY.
-
-This is usually a subnode of ocp2scp to which it is connected.
-
-usb2phy@4a0ad080 {
-	compatible = "ti,omap-usb2";
-	reg = <0x4a0ad080 0x58>;
-	ctrl-module = <&omap_control_usb>;
-	#phy-cells = <0>;
-	clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
-	clock-names = "wkupclk", "refclk";
-};
-
 TI PIPE3 PHY
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml b/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml
new file mode 100644
index 000000000000..51492fe738ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/transmit-amplitude.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common PHY and network PCS transmit amplitude property binding
+
+description:
+  Binding describing the peak-to-peak transmit amplitude for common PHYs
+  and network PCSes.
+
+maintainers:
+  - Marek Behún <kabel@kernel.org>
+
+properties:
+  tx-p2p-microvolt:
+    description:
+      Transmit amplitude voltages in microvolts, peak-to-peak. If this property
+      contains multiple values for various PHY modes, the
+      'tx-p2p-microvolt-names' property must be provided and contain
+      corresponding mode names.
+
+  tx-p2p-microvolt-names:
+    description: |
+      Names of the modes corresponding to voltages in the 'tx-p2p-microvolt'
+      property. Required only if multiple voltages are provided.
+
+      If a value of 'default' is provided, the system should use it for any PHY
+      mode that is otherwise not defined here. If 'default' is not provided, the
+      system should use manufacturer default value.
+    minItems: 1
+    maxItems: 16
+    items:
+      enum:
+        - default
+
+        # ethernet modes
+        - sgmii
+        - qsgmii
+        - xgmii
+        - 1000base-x
+        - 2500base-x
+        - 5gbase-r
+        - rxaui
+        - xaui
+        - 10gbase-kr
+        - usxgmii
+        - 10gbase-r
+        - 25gbase-r
+
+        # PCIe modes
+        - pcie
+        - pcie1
+        - pcie2
+        - pcie3
+        - pcie4
+        - pcie5
+        - pcie6
+
+        # USB modes
+        - usb
+        - usb-ls
+        - usb-fs
+        - usb-hs
+        - usb-ss
+        - usb-ss+
+        - usb-4
+
+        # storage modes
+        - sata
+        - ufs-hs
+        - ufs-hs-a
+        - ufs-hs-b
+
+        # display modes
+        - lvds
+        - dp
+        - dp-rbr
+        - dp-hbr
+        - dp-hbr2
+        - dp-hbr3
+        - dp-uhbr-10
+        - dp-uhbr-13.5
+        - dp-uhbr-20
+
+        # camera modes
+        - mipi-dphy
+        - mipi-dphy-univ
+        - mipi-dphy-v2.5-univ
+
+dependencies:
+  tx-p2p-microvolt-names: [ tx-p2p-microvolt ]
+
+additionalProperties: true
+
+examples:
+  - |
+    phy: phy {
+      #phy-cells = <1>;
+      tx-p2p-microvolt = <915000>, <1100000>, <1200000>;
+      tx-p2p-microvolt-names = "2500base-x", "usb-hs", "usb-ss";
+    };
diff --git a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt
deleted file mode 100644
index 1889d3b89d68..000000000000
--- a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Socionext UniPhier PCIe PHY bindings
-
-This describes the devicetree bindings for PHY interface built into
-PCIe controller implemented on Socionext UniPhier SoCs.
-
-Required properties:
-- compatible: Should contain one of the following:
-    "socionext,uniphier-ld20-pcie-phy" - for LD20 PHY
-    "socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY
-- reg: Specifies offset and length of the register set for the device.
-- #phy-cells: Must be zero.
-- clocks: A phandle to the clock gate for PCIe glue layer including
-	this phy.
-- resets: A phandle to the reset line for PCIe glue layer including
-	this phy.
-
-Optional properties:
-- socionext,syscon: A phandle to system control to set configurations
-	for phy.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Example:
-	pcie_phy: phy@66038000 {
-		compatible = "socionext,uniphier-ld20-pcie-phy";
-		reg = <0x66038000 0x4000>;
-		#phy-cells = <0>;
-		clocks = <&sys_clk 24>;
-		resets = <&sys_rst 24>;
-		socionext,syscon = <&soc_glue>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt
deleted file mode 100644
index b43b28250cc0..000000000000
--- a/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Socionext UniPhier USB2 PHY
-
-This describes the devicetree bindings for PHY interface built into
-USB2 controller implemented on Socionext UniPhier SoCs.
-
-Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3
-controller doesn't include its own High-Speed PHY. This needs to specify
-USB2 PHY instead of USB3 HS-PHY.
-
-Required properties:
-- compatible: Should contain one of the following:
-    "socionext,uniphier-pro4-usb2-phy" - for Pro4 SoC
-    "socionext,uniphier-ld11-usb2-phy" - for LD11 SoC
-
-Sub-nodes:
-Each PHY should be represented as a sub-node.
-
-Sub-nodes required properties:
-- #phy-cells: Should be 0.
-- reg: The number of the PHY.
-
-Sub-nodes optional properties:
-- vbus-supply: A phandle to the regulator for USB VBUS.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Example:
-	soc-glue@5f800000 {
-		...
-		usb-phy {
-			compatible = "socionext,uniphier-ld11-usb2-phy";
-			usb_phy0: phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-			...
-		};
-	};
-
-	usb@5a800100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		...
-		phy-names = "usb";
-		phys = <&usb_phy0>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt
deleted file mode 100644
index e8d8086a7ae9..000000000000
--- a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-Socionext UniPhier USB3 High-Speed (HS) PHY
-
-This describes the devicetree bindings for PHY interfaces built into
-USB3 controller implemented on Socionext UniPhier SoCs.
-Although the controller includes High-Speed PHY and Super-Speed PHY,
-this describes about High-Speed PHY.
-
-Required properties:
-- compatible: Should contain one of the following:
-    "socionext,uniphier-pro4-usb3-hsphy" - for Pro4 SoC
-    "socionext,uniphier-pxs2-usb3-hsphy" - for PXs2 SoC
-    "socionext,uniphier-ld20-usb3-hsphy" - for LD20 SoC
-    "socionext,uniphier-pxs3-usb3-hsphy" - for PXs3 SoC
-- reg: Specifies offset and length of the register set for the device.
-- #phy-cells: Should be 0.
-- clocks: A list of phandles to the clock gate for USB3 glue layer.
-	According to the clock-names, appropriate clocks are required.
-- clock-names: Should contain the following:
-    "gio", "link" - for Pro4 SoC
-    "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional.
-    "phy", "link" - for others
-- resets: A list of phandles to the reset control for USB3 glue layer.
-	According to the reset-names, appropriate resets are required.
-- reset-names: Should contain the following:
-    "gio", "link" - for Pro4 SoC
-    "phy", "link" - for others
-
-Optional properties:
-- vbus-supply: A phandle to the regulator for USB VBUS.
-- nvmem-cells: Phandles to nvmem cell that contains the trimming data.
-	Available only for HS-PHY implemented on LD20 and PXs3, and
-	if unspecified, default value is used.
-- nvmem-cell-names: Should be the following names, which correspond to
-	each nvmem-cells.
-	All of the 3 parameters associated with the following names are
-	required for each port, if any one is omitted, the trimming data
-	of the port will not be set at all.
-    "rterm", "sel_t", "hs_i" - Each cell name for phy parameters
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Example:
-
-	usb-glue@65b00000 {
-		compatible = "socionext,uniphier-ld20-dwc3-glue",
-			     "simple-mfd";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x65b00000 0x400>;
-
-		usb_vbus0: regulator {
-			...
-		};
-
-		usb_hsphy0: hs-phy@200 {
-			compatible = "socionext,uniphier-ld20-usb3-hsphy";
-			reg = <0x200 0x10>;
-			#phy-cells = <0>;
-			clock-names = "link", "phy";
-			clocks = <&sys_clk 14>, <&sys_clk 16>;
-			reset-names = "link", "phy";
-			resets = <&sys_rst 14>, <&sys_rst 16>;
-			vbus-supply = <&usb_vbus0>;
-			nvmem-cell-names = "rterm", "sel_t", "hs_i";
-			nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
-				      <&usb_hs_i0>;
-		};
-		...
-	};
diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt
deleted file mode 100644
index 490b815445e8..000000000000
--- a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Socionext UniPhier USB3 Super-Speed (SS) PHY
-
-This describes the devicetree bindings for PHY interfaces built into
-USB3 controller implemented on Socionext UniPhier SoCs.
-Although the controller includes High-Speed PHY and Super-Speed PHY,
-this describes about Super-Speed PHY.
-
-Required properties:
-- compatible: Should contain one of the following:
-    "socionext,uniphier-pro4-usb3-ssphy" - for Pro4 SoC
-    "socionext,uniphier-pxs2-usb3-ssphy" - for PXs2 SoC
-    "socionext,uniphier-ld20-usb3-ssphy" - for LD20 SoC
-    "socionext,uniphier-pxs3-usb3-ssphy" - for PXs3 SoC
-- reg: Specifies offset and length of the register set for the device.
-- #phy-cells: Should be 0.
-- clocks: A list of phandles to the clock gate for USB3 glue layer.
-	According to the clock-names, appropriate clocks are required.
-- clock-names:
-    "gio", "link" - for Pro4 SoC
-    "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional.
-    "phy", "link" - for others
-- resets: A list of phandles to the reset control for USB3 glue layer.
-	According to the reset-names, appropriate resets are required.
-- reset-names:
-    "gio", "link" - for Pro4 SoC
-    "phy", "link" - for others
-
-Optional properties:
-- vbus-supply: A phandle to the regulator for USB VBUS.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Example:
-
-	usb-glue@65b00000 {
-		compatible = "socionext,uniphier-ld20-dwc3-glue",
-			     "simple-mfd";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x65b00000 0x400>;
-
-		usb_vbus0: regulator {
-			...
-		};
-
-		usb_ssphy0: ss-phy@300 {
-			compatible = "socionext,uniphier-ld20-usb3-ssphy";
-			reg = <0x300 0x10>;
-			#phy-cells = <0>;
-			clock-names = "link", "phy";
-			clocks = <&sys_clk 14>, <&sys_clk 16>;
-			reset-names = "link", "phy";
-			resets = <&sys_rst 14>, <&sys_rst 16>;
-			vbus-supply = <&usb_vbus0>;
-		};
-		...
-	};
diff --git a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
new file mode 100644
index 000000000000..cefbc8b53a83
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/xlnx,zynqmp-psgtr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP Gigabit Transceiver PHY
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  This binding describes the Xilinx ZynqMP Gigabit Transceiver (GTR) PHY. The
+  GTR provides four lanes and is used by USB, SATA, PCIE, Display port and
+  Ethernet SGMII controllers.
+
+properties:
+  "#phy-cells":
+    const: 4
+    description: |
+      The cells contain the following arguments.
+
+      - description: The GTR lane
+        minimum: 0
+        maximum: 3
+      - description: The PHY type
+        enum:
+          - PHY_TYPE_DP
+          - PHY_TYPE_PCIE
+          - PHY_TYPE_SATA
+          - PHY_TYPE_SGMII
+          - PHY_TYPE_USB3
+      - description: The PHY instance
+        minimum: 0
+        maximum: 1 # for DP, SATA or USB
+        maximum: 3 # for PCIE or SGMII
+      - description: The reference clock number
+        minimum: 0
+        maximum: 3
+
+  compatible:
+    enum:
+      - xlnx,zynqmp-psgtr-v1.1
+      - xlnx,zynqmp-psgtr
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      Clock for each PS_MGTREFCLK[0-3] reference clock input. Unconnected
+      inputs shall not have an entry.
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      pattern: "^ref[0-3]$"
+
+  reg:
+    items:
+      - description: SERDES registers block
+      - description: SIOU registers block
+
+  reg-names:
+    items:
+      - const: serdes
+      - const: siou
+
+  xlnx,tx-termination-fix:
+    description: |
+      Include this for fixing functional issue with the TX termination
+      resistance in GT, which can be out of spec for the XCZU9EG silicon
+      version.
+    type: boolean
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - reg-names
+
+if:
+  properties:
+    compatible:
+      const: xlnx,zynqmp-psgtr-v1.1
+
+then:
+  properties:
+    xlnx,tx-termination-fix: false
+
+additionalProperties: false
+
+examples:
+  - |
+    phy: phy@fd400000 {
+        compatible = "xlnx,zynqmp-psgtr-v1.1";
+        reg = <0xfd400000 0x40000>,
+              <0xfd3d0000 0x1000>;
+        reg-names = "serdes", "siou";
+        clocks = <&refclks 3>, <&refclks 2>, <&refclks 0>;
+        clock-names = "ref1", "ref2", "ref3";
+        #phy-cells = <4>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
new file mode 100644
index 000000000000..fb0f69ce9c16
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi S500 SoC pinmux & GPIO controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+  Pinmux & GPIO controller manages pin multiplexing & configuration including
+  GPIO function selection & GPIO attributes configuration. Please refer to
+  pinctrl-bindings.txt in this directory for common binding part and usage.
+
+properties:
+  compatible:
+    const: actions,s500-pinctrl
+
+  reg:
+    items:
+      - description: GPIO Output + GPIO Input + GPIO Data
+      - description: Multiplexing Control
+      - description: PAD Pull Control + PAD Schmitt Trigger Enable + PAD Control
+      - description: PAD Drive Capacity Select
+    minItems: 1
+
+  clocks:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  '#gpio-cells':
+    description:
+      Specifies the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the pin number and flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  interrupts:
+    description:
+      One interrupt per each of the 5 GPIO ports supported by the controller,
+      sorted by port number ascending order.
+    minItems: 5
+    maxItems: 5
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description:
+          Pinctrl node's client devices specify pin muxes using subnodes,
+          which in turn use the standard properties below.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of gpio pin groups affected by the functions specified in
+              this subnode.
+            items:
+              oneOf:
+                - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp,
+                         rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
+                         rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
+                         i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
+                         ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
+                         ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
+                         dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
+                         dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
+                         spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
+                         dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
+                         uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
+                         sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
+                         uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
+                         uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
+                         pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
+                         dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
+                         nand_ceb3_mfp]
+            minItems: 1
+            maxItems: 32
+
+          function:
+            description:
+              Specify the alternative function to be configured for the
+              given gpio pin groups.
+            enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
+                   sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
+                   i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+                   p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
+                   mipi_csi, nand, spdif, ts, lcd0]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+      '^(.*-)?pinconf$':
+        type: object
+        description:
+          Pinctrl node's client devices specify pin configurations using
+          subnodes, which in turn use the standard properties below.
+        $ref: pincfg-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of gpio pin groups affected by the drive-strength property
+              specified in this subnode.
+            items:
+              oneOf:
+                - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv,
+                         rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
+                         smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
+                         i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
+                         lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
+                         sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
+                         spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
+                         i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
+                         sens0_ckout_drv, uart3_all_drv]
+            minItems: 1
+            maxItems: 32
+
+          pins:
+            description:
+              List of gpio pins affected by the bias-pull-* and
+              input-schmitt-* properties specified in this subnode.
+            items:
+              oneOf:
+                - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen,
+                         eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
+                         eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
+                         i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
+                         i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
+                         ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
+                         lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
+                         lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
+                         lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
+                         dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
+                         dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
+                         sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
+                         spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
+                         uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
+                         sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
+                         dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
+                         uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
+                         pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
+                         i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
+                         csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
+                         csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
+                         dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
+                         dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
+                         pkg2, pkg3]
+            minItems: 1
+            maxItems: 64
+
+          bias-pull-up: true
+          bias-pull-down: true
+
+          drive-strength:
+            description:
+              Selects the drive strength for the specified pins, in mA.
+            enum: [2, 4, 8, 12]
+
+          input-schmitt-enable: true
+          input-schmitt-disable: true
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - gpio-controller
+  - gpio-ranges
+  - '#gpio-cells'
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl: pinctrl@b01b0000 {
+        compatible = "actions,s500-pinctrl";
+        reg = <0xb01b0000 0x40>, <0xb01b0040 0x10>,
+              <0xb01b0060 0x18>, <0xb01b0080 0xc>;
+        clocks = <&cmu 55>;
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 132>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+        mmc0_pins: mmc0-pins {
+            pinmux {
+                groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+                         "sd0_cmd_mfp", "sd0_clk_mfp";
+                function = "sd0";
+            };
+
+            drv-pinconf {
+                groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
+                drive-strength = <8>;
+            };
+
+            bias-pinconf {
+                pins = "sd0_d0", "sd0_d1", "sd0_d2",
+                       "sd0_d3", "sd0_cmd";
+                bias-pull-up;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
index bfefd09d8c1e..1e3c8de6cae1 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/allwinner,sun4i-a10-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Pin Controller Device Tree Bindings
+title: Allwinner A10 Pin Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -46,11 +46,16 @@ properties:
       - allwinner,sun8i-v3s-pinctrl
       - allwinner,sun9i-a80-pinctrl
       - allwinner,sun9i-a80-r-pinctrl
+      - allwinner,sun20i-d1-pinctrl
       - allwinner,sun50i-a64-pinctrl
       - allwinner,sun50i-a64-r-pinctrl
+      - allwinner,sun50i-a100-pinctrl
+      - allwinner,sun50i-a100-r-pinctrl
       - allwinner,sun50i-h5-pinctrl
       - allwinner,sun50i-h6-pinctrl
       - allwinner,sun50i-h6-r-pinctrl
+      - allwinner,sun50i-h616-pinctrl
+      - allwinner,sun50i-h616-r-pinctrl
       - allwinner,suniv-f1c100s-pinctrl
       - nextthing,gr8-pinctrl
 
@@ -59,7 +64,7 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 5
+    maxItems: 8
     description:
       One interrupt per external interrupt bank supported on the
       controller, sorted by bank number ascending order.
@@ -76,21 +81,17 @@ properties:
       - const: hosc
       - const: losc
 
-  resets:
-    maxItems: 1
-
   gpio-controller: true
   interrupt-controller: true
   gpio-line-names: true
 
   input-debounce:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 5
     description:
       Debouncing periods in microseconds, one period per interrupt
       bank found in the controller
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
 
 patternProperties:
   # It's pretty scary, but the basic idea is that:
@@ -115,9 +116,8 @@ patternProperties:
       bias-pull-down: true
 
       drive-strength:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 10, 20, 30, 40 ]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [10, 20, 30, 40]
 
     required:
       - pins
@@ -125,26 +125,72 @@ patternProperties:
 
     additionalProperties: false
 
-  "^vcc-p[a-hlm]-supply$":
+  "^vcc-p[a-ilm]-supply$":
     description:
       Power supplies for pin banks.
 
 required:
   - "#gpio-cells"
-  - "#interrupt-cells"
   - compatible
   - reg
-  - interrupts
   - clocks
   - clock-names
   - gpio-controller
-  - interrupt-controller
 
 allOf:
   # FIXME: We should have the pin bank supplies here, but not a lot of
   # boards are defining it at the moment so it would generate a lot of
   # warnings.
 
+  - $ref: "pinctrl.yaml#"
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - allwinner,sun50i-h616-r-pinctrl
+
+    then:
+      required:
+        - "#interrupt-cells"
+        - interrupts
+        - interrupt-controller
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun50i-h616-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun50i-a100-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 7
+          maxItems: 7
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun20i-d1-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+
   - if:
       properties:
         compatible:
@@ -157,62 +203,75 @@ allOf:
           minItems: 5
           maxItems: 5
 
-    else:
-      if:
-        properties:
-          compatible:
-            enum:
-              - allwinner,sun6i-a31-pinctrl
-              - allwinner,sun6i-a31s-pinctrl
-              - allwinner,sun50i-h6-pinctrl
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun6i-a31-pinctrl
+            - allwinner,sun6i-a31s-pinctrl
+            - allwinner,sun50i-h6-pinctrl
 
-      then:
-        properties:
-          interrupts:
-            minItems: 4
-            maxItems: 4
-
-      else:
-        if:
-          properties:
-            compatible:
-              enum:
-                - allwinner,sun8i-a23-pinctrl
-                - allwinner,sun8i-a83t-pinctrl
-                - allwinner,sun50i-a64-pinctrl
-                - allwinner,sun50i-h5-pinctrl
-                - allwinner,suniv-f1c100s-pinctrl
-
-        then:
-          properties:
-            interrupts:
-              minItems: 3
-              maxItems: 3
-
-        else:
-          if:
-            properties:
-              compatible:
-                enum:
-                  - allwinner,sun6i-a31-r-pinctrl
-                  - allwinner,sun8i-a33-pinctrl
-                  - allwinner,sun8i-h3-pinctrl
-                  - allwinner,sun8i-v3-pinctrl
-                  - allwinner,sun8i-v3s-pinctrl
-                  - allwinner,sun9i-a80-r-pinctrl
-                  - allwinner,sun50i-h6-r-pinctrl
-
-          then:
-            properties:
-              interrupts:
-                minItems: 2
-                maxItems: 2
-
-          else:
-            properties:
-              interrupts:
-                minItems: 1
-                maxItems: 1
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun8i-a23-pinctrl
+            - allwinner,sun8i-a83t-pinctrl
+            - allwinner,sun50i-a64-pinctrl
+            - allwinner,sun50i-h5-pinctrl
+            - allwinner,suniv-f1c100s-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun6i-a31-r-pinctrl
+            - allwinner,sun8i-a33-pinctrl
+            - allwinner,sun8i-h3-pinctrl
+            - allwinner,sun8i-v3-pinctrl
+            - allwinner,sun8i-v3s-pinctrl
+            - allwinner,sun9i-a80-r-pinctrl
+            - allwinner,sun50i-h6-r-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun4i-a10-pinctrl
+            - allwinner,sun5i-a10s-pinctrl
+            - allwinner,sun5i-a13-pinctrl
+            - allwinner,sun7i-a20-pinctrl
+            - allwinner,sun8i-a23-r-pinctrl
+            - allwinner,sun8i-a83t-r-pinctrl
+            - allwinner,sun8i-h3-r-pinctrl
+            - allwinner,sun8i-r40-pinctrl
+            - allwinner,sun50i-a64-r-pinctrl
+            - allwinner,sun50i-a100-r-pinctrl
+            - nextthing,gr8-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 1
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
new file mode 100644
index 000000000000..d3b11351ca45
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/apple,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple GPIO controller
+
+maintainers:
+  - Mark Kettenis <kettenis@openbsd.org>
+
+description: |
+  The Apple GPIO controller is a simple combined pin and GPIO
+  controller present on Apple ARM SoC platforms, including various
+  iPhone and iPad devices and the "Apple Silicon" Macs.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-pinctrl
+          - apple,t6000-pinctrl
+      - const: apple,pinctrl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  apple,npins:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of pins in this GPIO controller.
+
+  interrupts:
+    description: One interrupt for each of the (up to 7) interrupt
+      groups supported by the controller sorted by interrupt group
+      number in ascending order.
+    minItems: 1
+    maxItems: 7
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      pinmux:
+        description:
+          Values are constructed from pin number and alternate function
+          configuration number using the APPLE_PINMUX() helper macro
+          defined in include/dt-bindings/pinctrl/apple.h.
+
+    required:
+      - pinmux
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - apple,npins
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/pinctrl/apple.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pinctrl: pinctrl@23c100000 {
+        compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+        reg = <0x2 0x3c100000 0x0 0x100000>;
+        clocks = <&gpio_clk>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 212>;
+        apple,npins = <212>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&aic>;
+        interrupts = <AIC_IRQ 16 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 17 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 18 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 19 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 20 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 21 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 22 IRQ_TYPE_LEVEL_HIGH>;
+
+        pcie_pins: pcie-pins {
+          pinmux = <APPLE_PINMUX(150, 1)>,
+                   <APPLE_PINMUX(151, 1)>,
+                   <APPLE_PINMUX(32, 1)>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index 135c7dfbc180..f4f1ee6b116e 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -16,15 +16,14 @@ description: |+
   - compatible:     Should be one of the following:
                     "aspeed,ast2400-scu", "syscon", "simple-mfd"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
   compatible:
     const: aspeed,ast2400-pinctrl
   reg:
-    description: |
-      A hint for the memory regions associated with the pin-controller
+    maxItems: 2
 
 patternProperties:
   '^.*$':
@@ -33,38 +32,46 @@ patternProperties:
     then:
       patternProperties:
         "^function|groups$":
-          allOf:
-            - $ref: "/schemas/types.yaml#/definitions/string"
-            - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14,
-              ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT,
-              DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2,
-              GPID4, GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12,
-              I2C13, I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD,
-              LPCPME, LPCRST, LPCSMI, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1,
-              NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
-              NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NDTS4, NRI1, NRI2,
-              NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, PWM1, PWM2, PWM3,
-              PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, ROM16,
-              ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RXD4,
-              SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
-              SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
-              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG,
-              SPI1PASSTHRU, SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7,
-              TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1,
-              USB2H1, USBCKI, VGABIOS_ROM, VGAHS, VGAVS, VPI18, VPI24, VPI30,
-              VPO12, VPO24, WDTRST1, WDTRST2 ]
+          $ref: "/schemas/types.yaml#/definitions/string"
+          enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+                  ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+                  EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
+                  GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
+                  I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
+                  MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
+                  NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
+                  NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
+                  PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+                  RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
+                  RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
+                  SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
+                  SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
+                  SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
+                  TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
+                  VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
+
+allOf:
+  - $ref: "pinctrl.yaml#"
 
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     syscon: scu@1e6e2000 {
         compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
         reg = <0x1e6e2000 0x1a8>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
 
         pinctrl: pinctrl {
-            compatible = "aspeed,g4-pinctrl";
+            compatible = "aspeed,ast2400-pinctrl";
 
             pinctrl_i2c3_default: i2c3_default {
                 function = "I2C3";
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 824f7fd1d51b..8168f0088471 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -17,20 +17,21 @@ description: |+
   			"aspeed,ast2500-scu", "syscon", "simple-mfd"
   			"aspeed,g5-scu", "syscon", "simple-mfd"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
   compatible:
     const: aspeed,ast2500-pinctrl
   reg:
-    description: |
-      A hint for the memory regions associated with the pin-controller
+    maxItems: 2
+
   aspeed,external-nodes:
     minItems: 2
     maxItems: 2
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     description: |
       A cell of phandles to external controller nodes:
       0: compatible with "aspeed,ast2500-gfx", "syscon"
@@ -43,87 +44,60 @@ patternProperties:
     then:
       patternProperties:
         "^function|groups$":
-          allOf:
-            - $ref: "/schemas/types.yaml#/definitions/string"
-            - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14,
-              ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT,
-              DDCCLK, DDCDAT, ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4,
-              GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13,
-              I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LAD0, LAD1,
-              LAD2, LAD3, LCLK, LFRAME, LPCHC, LPCPD, LPCPLUS, LPCPME, LPCRST,
-              LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2,
-              NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
-              NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
-              NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, PWM1, PWM2,
-              PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, RXD1,
-              RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
-              SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
-              SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI,
-              SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1,
-              SPI1DEBUG, SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO,
-              SPI2MOSI, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1,
-              TXD2, TXD3, TXD4, UART6, USB11BHID, USB2AD, USB2AH, USB2BD,
-              USB2BH, USBCKI, VGABIOSROM, VGAHS, VGAVS, VPI24, VPO, WDTRST1,
-              WDTRST2, ]
+          $ref: "/schemas/types.yaml#/definitions/string"
+          enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+                  ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+                  ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
+                  GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
+                  I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
+                  LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
+                  MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
+                  NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
+                  NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
+                  PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+                  RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
+                  SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
+                  SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
+                  SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
+                  SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
+                  TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
+                  USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
+                  VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
+
+allOf:
+  - $ref: "pinctrl.yaml#"
 
 required:
   - compatible
   - aspeed,external-nodes
 
+additionalProperties: false
+
 examples:
   - |
-    apb {
-        compatible = "simple-bus";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges;
-
-        syscon: scu@1e6e2000 {
-            compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
-            reg = <0x1e6e2000 0x1a8>;
-
-            pinctrl: pinctrl {
-                compatible = "aspeed,g5-pinctrl";
-                aspeed,external-nodes = <&gfx>, <&lhc>;
-
-                pinctrl_i2c3_default: i2c3_default {
-                    function = "I2C3";
-                    groups = "I2C3";
-                };
-
-                pinctrl_gpioh0_unbiased_default: gpioh0 {
-                    pins = "A18";
-                    bias-disable;
-                };
-            };
-        };
-
-        gfx: display@1e6e6000 {
-            compatible = "aspeed,ast2500-gfx", "syscon";
-            reg = <0x1e6e6000 0x1000>;
-        };
-    };
-
-    lpc: lpc@1e789000 {
-        compatible = "aspeed,ast2500-lpc", "simple-mfd";
-        reg = <0x1e789000 0x1000>;
+    #include <dt-bindings/clock/aspeed-clock.h>
+    scu@1e6e2000 {
+        compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
+        reg = <0x1e6e2000 0x1a8>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
 
         #address-cells = <1>;
         #size-cells = <1>;
-        ranges = <0x0 0x1e789000 0x1000>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
 
-        lpc_host: lpc-host@80 {
-            compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
-            reg = <0x80 0x1e0>;
-            reg-io-width = <4>;
+        pinctrl: pinctrl {
+            compatible = "aspeed,ast2500-pinctrl";
+            aspeed,external-nodes = <&gfx>, <&lhc>;
 
-            #address-cells = <1>;
-            #size-cells = <1>;
-            ranges = <0x0 0x80 0x1e0>;
+            pinctrl_i2c3_default: i2c3_default {
+                function = "I2C3";
+                groups = "I2C3";
+            };
 
-            lhc: lhc@20 {
-                   compatible = "aspeed,ast2500-lhc";
-                   reg = <0x20 0x24 0x48 0x8>;
+            pinctrl_gpioh0_unbiased_default: gpioh0 {
+                pins = "A18";
+                bias-disable;
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index ac8d1c30a8ed..62424c42c981 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -16,7 +16,7 @@ description: |+
   - compatible: Should be one of the following:
                 "aspeed,ast2600-scu", "syscon", "simple-mfd"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
@@ -30,76 +30,81 @@ patternProperties:
     then:
       properties:
         function:
-          allOf:
-            - $ref: "/schemas/types.yaml#/definitions/string"
-            - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC,
-              ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0,
-              GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
-              GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11,
-              I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6,
-              I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
-              LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
-              MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2,
-              NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
-              NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
-              NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
-              PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7,
-              PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
-              RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12,
-              SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5,
-              SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL,
-              SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
-              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
-              TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
-              TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
-              THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13,
-              UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
-              USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
-              WDTRST4, ]
+          $ref: "/schemas/types.yaml#/definitions/string"
+          enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+                  ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
+                  FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
+                  GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
+                  GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
+                  I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
+                  I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
+                  MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
+                  NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
+                  NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
+                  NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
+                  PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
+                  PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+                  RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
+                  SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
+                  SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
+                  SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
+                  SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
+                  TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
+                  THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
+                  UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
+                  USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ]
+
         groups:
-          allOf:
-            - $ref: "/schemas/types.yaml#/definitions/string"
-            - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1,
-              EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID,
-              FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5,
-              GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6,
-              GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14,
-              I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9,
-              I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD,
-              LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4,
-              MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1,
-              NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
-              NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
-              OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1,
-              PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0,
-              PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1,
-              PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4,
-              RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1,
-              SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1,
-              SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1,
-              SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7,
-              SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
-              SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
-              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
-              TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
-              TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
-              THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0,
-              UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, USBA,
-              USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]
+          $ref: "/schemas/types.yaml#/definitions/string"
+          enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+                  ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
+                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP,
+                  GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
+                  GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
+                  I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
+                  I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
+                  LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
+                  MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
+                  NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
+                  NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
+                  OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
+                  PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
+                  PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
+                  QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+                  RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
+                  SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
+                  SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
+                  SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2,
+                  SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
+                  SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
+                  TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
+                  TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
+                  TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
+                  UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
+                  WDTRST3, WDTRST4]
+
+allOf:
+  - $ref: "pinctrl.yaml#"
 
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     syscon: scu@1e6e2000 {
         compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
         reg = <0x1e6e2000 0xf6c>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
 
         pinctrl: pinctrl {
-            compatible = "aspeed,g6-pinctrl";
+            compatible = "aspeed,ast2600-pinctrl";
 
             pinctrl_pwm10g1_default: pwm10g1_default {
                 function = "PWM10";
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index eb39f5051159..e8abbdad7b5d 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -38,7 +38,7 @@ Bank: 3 (A, B and C)
   0xffffffff 0x7fff3ccf  /* pioB */
   0xffffffff 0x007fffff  /* pioC */
 
-For each peripheral/bank we will descibe in a u32 if a pin can be
+For each peripheral/bank we will describe in a u32 if a pin can be
 configured in it by putting 1 to the pin bit (1 << pin)
 
 Let's take the pioA on peripheral B
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
index 04d16fb69eb7..e2b861ce16d8 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -4,7 +4,9 @@ The Atmel PIO4 controller is used to select the function of a pin and to
 configure it.
 
 Required properties:
-- compatible: "atmel,sama5d2-pinctrl".
+- compatible:
+	"atmel,sama5d2-pinctrl"
+	"microchip,sama7g5-pinctrl"
 - reg: base address and length of the PIO controller.
 - interrupts: interrupt outputs from the controller, one for each bank.
 - interrupt-controller: mark the device node as an interrupt controller.
@@ -33,9 +35,11 @@ ioset settings. Use the macros from boot/dts/<soc>-pinfunc.h file to get the
 right representation of the pin.
 
 Optional properties:
-- GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable,
-bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable,
-input-debounce, output-low, output-high.
+- GENERIC_PINCONFIG: generic pinconfig options to use:
+	- bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
+	  input-schmitt-enable, input-debounce, output-low, output-high.
+	- for microchip,sama7g5-pinctrl only:
+		- slew-rate: 0 - disabled, 1 - enabled (default)
 - atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for
 high drive. The default value is low drive.
 
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
index 4eaae32821ae..e047a198db38 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
@@ -85,7 +85,7 @@ Optional Properties (for I2C pins):
 - function:			String. Specifies the pin mux selection. Values
 				must be one of: "alt1", "alt2", "alt3", "alt4"
 - bias-pull-up:			Integer. Pull up strength in Ohm. There are 3
-				pull-up resisitors (1.2k, 1.8k, 2.7k) available
+				pull-up resistors (1.2k, 1.8k, 2.7k) available
 				in parallel for I2C pins, so the valid values
 				are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm.
 - bias-disable:			No arguments. Disable pin bias.
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index 3cab7336a326..5682b2010e50 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -9,13 +9,16 @@ Required properties:
   "brcm,bcm2835-gpio" - BCM2835 compatible pinctrl
   "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl
   "brcm,bcm2711-gpio" - BCM2711 compatible pinctrl
+  "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl
 - reg: Should contain the physical address of the GPIO module's registers.
 - gpio-controller: Marks the device node as a GPIO controller.
 - #gpio-cells : Should be two. The first cell is the pin number and the
   second cell is used to specify optional parameters:
   - bit 0 specifies polarity (0 for normal, 1 for inverted)
 - interrupts : The interrupt outputs from the controller. One interrupt per
-  individual bank followed by the "all banks" interrupt.
+  individual bank followed by the "all banks" interrupt. For BCM7211, an
+  additional set of per-bank interrupt line and an "all banks" wake-up
+  interrupt may be specified.
 - interrupt-controller: Marks the device node as an interrupt controller.
 - #interrupt-cells : Should be 2.
   The first cell is the GPIO number.
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt
deleted file mode 100644
index 8ab2d468dbdb..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Broadcom Northstar pins mux controller
-
-Some of Northstar SoCs's pins can be used for various purposes thanks to the mux
-controller. This binding allows describing mux controller and listing available
-functions. They can be referenced later by other bindings to let system
-configure controller correctly.
-
-A list of pins varies across chipsets so few bindings are available.
-
-Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon"
-noce.
-
-Required properties:
-- compatible: must be one of:
-	"brcm,bcm4708-pinmux"
-	"brcm,bcm4709-pinmux"
-	"brcm,bcm53012-pinmux"
-- offset: offset of pin registers in the CRU block
-
-Functions and their groups available for all chipsets:
-- "spi": "spi_grp"
-- "i2c": "i2c_grp"
-- "pwm": "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"
-- "uart1": "uart1_grp"
-
-Additionally available on BCM4709 and BCM53012:
-- "mdio": "mdio_grp"
-- "uart2": "uart2_grp"
-- "sdio": "sdio_pwr_grp", "sdio_1p8v_grp"
-
-For documentation of subnodes see:
-Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Example:
-	dmu@1800c000 {
-		compatible = "simple-bus";
-		ranges = <0 0x1800c000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		cru@100 {
-			compatible = "syscon", "simple-mfd";
-			reg = <0x100 0x1a4>;
-
-			pinctrl {
-				compatible = "brcm,bcm4708-pinmux";
-				offset = <0xc0>;
-
-				spi-pins {
-					function = "spi";
-					groups = "spi_grp";
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
new file mode 100644
index 000000000000..8a9fb9b433ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm4908-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4908 pin controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+  Binding for pin controller present on BCM4908 family SoCs.
+
+properties:
+  compatible:
+    const: brcm,bcm4908-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+    additionalProperties: false
+
+    properties:
+      function:
+        enum: [ led_0, led_1, led_2, led_3, led_4, led_5, led_6, led_7, led_8,
+                led_9, led_10, led_11, led_12, led_13, led_14, led_15, led_16,
+                led_17, led_18, led_19, led_20, led_21, led_22, led_23, led_24,
+                led_25, led_26, led_27, led_28, led_29, led_30, led_31,
+                hs_uart, i2c, i2s, nand_ctrl, nand_data, emmc_ctrl, usb0_pwr,
+                usb1_pwr ]
+
+      groups:
+        minItems: 1
+        maxItems: 2
+        items:
+          enum: [ led_0_grp_a, led_1_grp_a, led_2_grp_a, led_3_grp_a,
+                  led_4_grp_a, led_5_grp_a, led_6_grp_a, led_7_grp_a,
+                  led_8_grp_a, led_9_grp_a, led_10_grp_a, led_10_grp_b,
+                  led_11_grp_a, led_11_grp_b, led_12_grp_a, led_12_grp_b,
+                  led_13_grp_a, led_13_grp_b, led_14_grp_a, led_15_grp_a,
+                  led_16_grp_a, led_17_grp_a, led_18_grp_a, led_19_grp_a,
+                  led_20_grp_a, led_21_grp_a, led_22_grp_a, led_23_grp_a,
+                  led_24_grp_a, led_25_grp_a, led_26_grp_a, led_27_grp_a,
+                  led_28_grp_a, led_29_grp_a, led_30_grp_a, led_31_grp_a,
+                  led_31_grp_b, hs_uart_grp, i2c_grp_a, i2c_grp_b, i2s_grp,
+                  nand_ctrl_grp, nand_data_grp, emmc_ctrl_grp, usb0_pwr_grp,
+                  usb1_pwr_grp ]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pinctrl@ff800560 {
+        compatible = "brcm,bcm4908-pinctrl";
+        reg = <0xff800560 0x10>;
+
+        led_0-a-pins {
+            function = "led_0";
+            groups = "led_0_grp_a";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
new file mode 100644
index 000000000000..ab019a1998e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6318 pin controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Bindings for Broadcom's BCM6318 memory-mapped pin controller.
+
+properties:
+  compatible:
+    const: brcm,bcm6318-pinctrl
+
+  reg:
+    maxItems: 2
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led,
+                ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led,
+                serial_led_data, serial_led_clk, inet_act_led, inet_fail_led,
+                dsl_led, post_fail_led, wlan_wps_led, usb_pwron,
+                usb_device_led, usb_active ]
+
+      pins:
+        enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+                gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@18 {
+      compatible = "brcm,bcm6318-pinctrl";
+      reg = <0x18 0x10>, <0x54 0x18>;
+
+      pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
+        function = "ephy0_spd_led";
+        pins = "gpio0";
+      };
+
+      pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
+        function = "ephy1_spd_led";
+        pins = "gpio1";
+      };
+
+      pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
+        function = "ephy2_spd_led";
+        pins = "gpio2";
+      };
+
+      pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
+        function = "ephy3_spd_led";
+        pins = "gpio3";
+      };
+
+      pinctrl_ephy0_act_led: ephy0_act_led-pins {
+        function = "ephy0_act_led";
+        pins = "gpio4";
+      };
+
+      pinctrl_ephy1_act_led: ephy1_act_led-pins {
+        function = "ephy1_act_led";
+        pins = "gpio5";
+      };
+
+      pinctrl_ephy2_act_led: ephy2_act_led-pins {
+        function = "ephy2_act_led";
+        pins = "gpio6";
+      };
+
+      pinctrl_ephy3_act_led: ephy3_act_led-pins {
+        function = "ephy3_act_led";
+        pins = "gpio7";
+      };
+
+      pinctrl_serial_led: serial_led-pins {
+        pinctrl_serial_led_data: serial_led_data-pins {
+          function = "serial_led_data";
+          pins = "gpio6";
+        };
+
+        pinctrl_serial_led_clk: serial_led_clk-pins {
+          function = "serial_led_clk";
+          pins = "gpio7";
+        };
+      };
+
+      pinctrl_inet_act_led: inet_act_led-pins {
+        function = "inet_act_led";
+        pins = "gpio8";
+      };
+
+      pinctrl_inet_fail_led: inet_fail_led-pins {
+        function = "inet_fail_led";
+        pins = "gpio9";
+      };
+
+      pinctrl_dsl_led: dsl_led-pins {
+        function = "dsl_led";
+        pins = "gpio10";
+      };
+
+      pinctrl_post_fail_led: post_fail_led-pins {
+        function = "post_fail_led";
+        pins = "gpio11";
+      };
+
+      pinctrl_wlan_wps_led: wlan_wps_led-pins {
+        function = "wlan_wps_led";
+        pins = "gpio12";
+      };
+
+      pinctrl_usb_pwron: usb_pwron-pins {
+        function = "usb_pwron";
+        pins = "gpio13";
+      };
+
+      pinctrl_usb_device_led: usb_device_led-pins {
+        function = "usb_device_led";
+        pins = "gpio13";
+      };
+
+      pinctrl_usb_active: usb_active-pins {
+        function = "usb_active";
+        pins = "gpio40";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
new file mode 100644
index 000000000000..8c9d4668c8c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm63268-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63268 pin controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Bindings for Broadcom's BCM63268 memory-mapped pin controller.
+
+properties:
+  compatible:
+    const: brcm,bcm63268-pinctrl
+
+  reg:
+    maxItems: 3
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ serial_led_clk, serial_led_data, hsspi_cs4, hsspi_cs5,
+                hsspi_cs6, hsspi_cs7, adsl_spi_miso, adsl_spi_mosi,
+                vreq_clk, pcie_clkreq_b, robosw_led_clk, robosw_led_data,
+                nand, gpio35_alt, dectpd, vdsl_phy_override_0,
+                vdsl_phy_override_1, vdsl_phy_override_2,
+                vdsl_phy_override_3, dsl_gpio8, dsl_gpio9 ]
+
+      pins:
+        enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19,
+                gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35
+                dectpd_grp, vdsl_phy_override_0_grp,
+                vdsl_phy_override_1_grp, vdsl_phy_override_2_grp,
+                vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@10 {
+      compatible = "brcm,bcm63268-pinctrl";
+      reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>;
+
+      pinctrl_serial_led: serial_led-pins {
+        pinctrl_serial_led_clk: serial_led_clk-pins {
+          function = "serial_led_clk";
+          pins = "gpio0";
+        };
+
+        pinctrl_serial_led_data: serial_led_data-pins {
+          function = "serial_led_data";
+          pins = "gpio1";
+        };
+      };
+
+      pinctrl_hsspi_cs4: hsspi_cs4-pins {
+        function = "hsspi_cs4";
+        pins = "gpio16";
+      };
+
+      pinctrl_hsspi_cs5: hsspi_cs5-pins {
+        function = "hsspi_cs5";
+        pins = "gpio17";
+      };
+
+      pinctrl_hsspi_cs6: hsspi_cs6-pins {
+        function = "hsspi_cs6";
+        pins = "gpio8";
+      };
+
+      pinctrl_hsspi_cs7: hsspi_cs7-pins {
+        function = "hsspi_cs7";
+        pins = "gpio9";
+      };
+
+      pinctrl_adsl_spi: adsl_spi-pins {
+        pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
+          function = "adsl_spi_miso";
+          pins = "gpio18";
+        };
+
+        pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
+          function = "adsl_spi_mosi";
+          pins = "gpio19";
+        };
+      };
+
+      pinctrl_vreq_clk: vreq_clk-pins {
+        function = "vreq_clk";
+        pins = "gpio22";
+      };
+
+      pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins {
+        function = "pcie_clkreq_b";
+        pins = "gpio23";
+      };
+
+      pinctrl_robosw_led_clk: robosw_led_clk-pins {
+        function = "robosw_led_clk";
+        pins = "gpio30";
+      };
+
+      pinctrl_robosw_led_data: robosw_led_data-pins {
+        function = "robosw_led_data";
+        pins = "gpio31";
+      };
+
+      pinctrl_nand: nand-pins {
+        function = "nand";
+        group = "nand_grp";
+      };
+
+      pinctrl_gpio35_alt: gpio35_alt-pins {
+        function = "gpio35_alt";
+        pin = "gpio35";
+      };
+
+      pinctrl_dectpd: dectpd-pins {
+        function = "dectpd";
+        group = "dectpd_grp";
+      };
+
+      pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins {
+        function = "vdsl_phy_override_0";
+        group = "vdsl_phy_override_0_grp";
+      };
+
+      pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins {
+        function = "vdsl_phy_override_1";
+        group = "vdsl_phy_override_1_grp";
+      };
+
+      pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins {
+        function = "vdsl_phy_override_2";
+        group = "vdsl_phy_override_2_grp";
+      };
+
+      pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins {
+        function = "vdsl_phy_override_3";
+        group = "vdsl_phy_override_3_grp";
+      };
+
+      pinctrl_dsl_gpio8: dsl_gpio8-pins {
+        function = "dsl_gpio8";
+        group = "dsl_gpio8";
+      };
+
+      pinctrl_dsl_gpio9: dsl_gpio9-pins {
+        function = "dsl_gpio9";
+        group = "dsl_gpio9";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
new file mode 100644
index 000000000000..a8e22ec02215
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6328 pin controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Bindings for Broadcom's BCM6328 memory-mapped pin controller.
+
+properties:
+  compatible:
+    const: brcm,bcm6328-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq,
+                led, ephy0_act_led, ephy1_act_led, ephy2_act_led,
+                ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ]
+
+      pins:
+        enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19,
+                gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
+                usb_port1 ]
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@18 {
+      compatible = "brcm,bcm6328-pinctrl";
+      reg = <0x18 0x10>;
+
+      pinctrl_serial_led: serial_led-pins {
+        pinctrl_serial_led_data: serial_led_data-pins {
+          function = "serial_led_data";
+          pins = "gpio6";
+        };
+
+        pinctrl_serial_led_clk: serial_led_clk-pins {
+          function = "serial_led_clk";
+          pins = "gpio7";
+        };
+      };
+
+      pinctrl_inet_act_led: inet_act_led-pins {
+        function = "inet_act_led";
+        pins = "gpio11";
+      };
+
+      pinctrl_pcie_clkreq: pcie_clkreq-pins {
+        function = "pcie_clkreq";
+        pins = "gpio16";
+      };
+
+      pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
+        function = "led";
+        pins = "gpio17";
+      };
+
+      pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
+        function = "led";
+        pins = "gpio18";
+      };
+
+      pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
+        function = "led";
+        pins = "gpio19";
+      };
+
+      pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
+        function = "led";
+        pins = "gpio20";
+      };
+
+      pinctrl_ephy0_act_led: ephy0_act_led-pins {
+        function = "ephy0_act_led";
+        pins = "gpio25";
+      };
+
+      pinctrl_ephy1_act_led: ephy1_act_led-pins {
+        function = "ephy1_act_led";
+        pins = "gpio26";
+      };
+
+      pinctrl_ephy2_act_led: ephy2_act_led-pins {
+        function = "ephy2_act_led";
+        pins = "gpio27";
+      };
+
+      pinctrl_ephy3_act_led: ephy3_act_led-pins {
+        function = "ephy3_act_led";
+        pins = "gpio28";
+      };
+
+      pinctrl_hsspi_cs1: hsspi_cs1-pins {
+        function = "hsspi_cs1";
+        pins = "hsspi_cs1";
+      };
+
+      pinctrl_usb_port1_device: usb_port1_device-pins {
+        function = "usb_device_port";
+        pins = "usb_port1";
+      };
+
+      pinctrl_usb_port1_host: usb_port1_host-pins {
+        function = "usb_host_port";
+        pins = "usb_port1";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
new file mode 100644
index 000000000000..35867355a47a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6358-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6358 pin controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Bindings for Broadcom's BCM6358 memory-mapped pin controller.
+
+properties:
+  compatible:
+    const: brcm,bcm6358-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia,
+                pwm_syn_clk, sys_irq ]
+
+      pins:
+        enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp,
+                led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@18 {
+      compatible = "brcm,bcm6358-pinctrl";
+      reg = <0x18 0x4>;
+
+      pinctrl_ebi_cs: ebi_cs-pins {
+        function = "ebi_cs";
+        groups = "ebi_cs_grp";
+      };
+
+      pinctrl_uart1: uart1-pins {
+        function = "uart1";
+        groups = "uart1_grp";
+      };
+
+      pinctrl_serial_led: serial_led-pins {
+        function = "serial_led";
+        groups = "serial_led_grp";
+      };
+
+      pinctrl_legacy_led: legacy_led-pins {
+        function = "legacy_led";
+        groups = "legacy_led_grp";
+      };
+
+      pinctrl_led: led-pins {
+        function = "led";
+        groups = "led_grp";
+      };
+
+      pinctrl_spi_cs_23: spi_cs-pins {
+        function = "spi_cs";
+        groups = "spi_cs_grp";
+      };
+
+      pinctrl_utopia: utopia-pins {
+        function = "utopia";
+        groups = "utopia_grp";
+      };
+
+      pinctrl_pwm_syn_clk: pwm_syn_clk-pins {
+        function = "pwm_syn_clk";
+        groups = "pwm_syn_clk_grp";
+      };
+
+      pinctrl_sys_irq: sys_irq-pins {
+        function = "sys_irq";
+        groups = "sys_irq_grp";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
new file mode 100644
index 000000000000..b584d4b27223
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6362-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6362 pin controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Bindings for Broadcom's BCM6362 memory-mapped pin controller.
+
+properties:
+  compatible:
+    const: brcm,bcm6362-pinctrl
+
+  reg:
+    maxItems: 2
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ usb_device_led, sys_irq, serial_led_clk, serial_led_data,
+                robosw_led_data, robosw_led_clk, robosw_led0, robosw_led1,
+                inet_led, spi_cs2, spi_cs3, ntr_pulse, uart1_scts,
+                uart1_srts, uart1_sdin, uart1_sdout, adsl_spi_miso,
+                adsl_spi_mosi, adsl_spi_clk, adsl_spi_cs, ephy0_led,
+                ephy1_led, ephy2_led, ephy3_led, ext_irq0, ext_irq1,
+                ext_irq2, ext_irq3, nand ]
+
+      pins:
+        enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+                gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
+                gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
+                gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ]
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@18 {
+      compatible = "brcm,bcm6362-pinctrl";
+      reg = <0x18 0x10>, <0x38 0x4>;
+
+      pinctrl_usb_device_led: usb_device_led-pins {
+        function = "usb_device_led";
+        pins = "gpio0";
+      };
+
+      pinctrl_sys_irq: sys_irq-pins {
+        function = "sys_irq";
+        pins = "gpio1";
+      };
+
+      pinctrl_serial_led: serial_led-pins {
+        pinctrl_serial_led_clk: serial_led_clk-pins {
+          function = "serial_led_clk";
+          pins = "gpio2";
+        };
+
+        pinctrl_serial_led_data: serial_led_data-pins {
+          function = "serial_led_data";
+          pins = "gpio3";
+        };
+      };
+
+      pinctrl_robosw_led_data: robosw_led_data-pins {
+        function = "robosw_led_data";
+        pins = "gpio4";
+      };
+
+      pinctrl_robosw_led_clk: robosw_led_clk-pins {
+        function = "robosw_led_clk";
+        pins = "gpio5";
+      };
+
+      pinctrl_robosw_led0: robosw_led0-pins {
+        function = "robosw_led0";
+        pins = "gpio6";
+      };
+
+      pinctrl_robosw_led1: robosw_led1-pins {
+        function = "robosw_led1";
+        pins = "gpio7";
+      };
+
+      pinctrl_inet_led: inet_led-pins {
+        function = "inet_led";
+        pins = "gpio8";
+      };
+
+      pinctrl_spi_cs2: spi_cs2-pins {
+        function = "spi_cs2";
+        pins = "gpio9";
+      };
+
+      pinctrl_spi_cs3: spi_cs3-pins {
+        function = "spi_cs3";
+        pins = "gpio10";
+      };
+
+      pinctrl_ntr_pulse: ntr_pulse-pins {
+        function = "ntr_pulse";
+        pins = "gpio11";
+      };
+
+      pinctrl_uart1_scts: uart1_scts-pins {
+        function = "uart1_scts";
+        pins = "gpio12";
+      };
+
+      pinctrl_uart1_srts: uart1_srts-pins {
+        function = "uart1_srts";
+        pins = "gpio13";
+      };
+
+      pinctrl_uart1: uart1-pins {
+        pinctrl_uart1_sdin: uart1_sdin-pins {
+          function = "uart1_sdin";
+          pins = "gpio14";
+        };
+
+        pinctrl_uart1_sdout: uart1_sdout-pins {
+          function = "uart1_sdout";
+          pins = "gpio15";
+        };
+      };
+
+      pinctrl_adsl_spi: adsl_spi-pins {
+        pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
+          function = "adsl_spi_miso";
+          pins = "gpio16";
+        };
+
+        pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
+          function = "adsl_spi_mosi";
+          pins = "gpio17";
+        };
+
+        pinctrl_adsl_spi_clk: adsl_spi_clk-pins {
+          function = "adsl_spi_clk";
+          pins = "gpio18";
+        };
+
+        pinctrl_adsl_spi_cs: adsl_spi_cs-pins {
+          function = "adsl_spi_cs";
+          pins = "gpio19";
+        };
+      };
+
+      pinctrl_ephy0_led: ephy0_led-pins {
+        function = "ephy0_led";
+        pins = "gpio20";
+      };
+
+      pinctrl_ephy1_led: ephy1_led-pins {
+        function = "ephy1_led";
+        pins = "gpio21";
+      };
+
+      pinctrl_ephy2_led: ephy2_led-pins {
+        function = "ephy2_led";
+        pins = "gpio22";
+      };
+
+      pinctrl_ephy3_led: ephy3_led-pins {
+        function = "ephy3_led";
+        pins = "gpio23";
+      };
+
+      pinctrl_ext_irq0: ext_irq0-pins {
+        function = "ext_irq0";
+        pins = "gpio24";
+      };
+
+      pinctrl_ext_irq1: ext_irq1-pins {
+        function = "ext_irq1";
+        pins = "gpio25";
+      };
+
+      pinctrl_ext_irq2: ext_irq2-pins {
+        function = "ext_irq2";
+        pins = "gpio26";
+      };
+
+      pinctrl_ext_irq3: ext_irq3-pins {
+        function = "ext_irq3";
+        pins = "gpio27";
+      };
+
+      pinctrl_nand: nand-pins {
+        function = "nand";
+        group = "nand_grp";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
new file mode 100644
index 000000000000..229323d9237d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
@@ -0,0 +1,220 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6368-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6368 pin controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Bindings for Broadcom's BCM6368 memory-mapped pin controller.
+
+properties:
+  compatible:
+    const: brcm,bcm6368-pinctrl
+
+  reg:
+    maxItems: 2
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ analog_afe_0, analog_afe_1, sys_irq, serial_led_data,
+                serial_led_clk, inet_led, ephy0_led, ephy1_led, ephy2_led,
+                ephy3_led, robosw_led_data, robosw_led_clk, robosw_led0,
+                robosw_led1, usb_device_led, pci_req1, pci_gnt1, pci_intb,
+                pci_req0, pci_gnt0, pcmcia_cd1, pcmcia_cd2, pcmcia_vs1,
+                pcmcia_vs2, ebi_cs2, ebi_cs3, spi_cs2, spi_cs3, spi_cs4,
+                spi_cs5, uart1 ]
+
+      pins:
+        enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+                gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
+                gpio16, gpio17, gpio18, gpio19, gpio20, gpio22, gpio23,
+                gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
+                gpio31, uart1_grp ]
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@18 {
+      compatible = "brcm,bcm6368-pinctrl";
+      reg = <0x18 0x4>, <0x38 0x4>;
+
+      pinctrl_analog_afe_0: analog_afe_0-pins {
+        function = "analog_afe_0";
+        pins = "gpio0";
+      };
+
+      pinctrl_analog_afe_1: analog_afe_1-pins {
+        function = "analog_afe_1";
+        pins = "gpio1";
+      };
+
+      pinctrl_sys_irq: sys_irq-pins {
+        function = "sys_irq";
+        pins = "gpio2";
+      };
+
+      pinctrl_serial_led: serial_led-pins {
+        pinctrl_serial_led_data: serial_led_data-pins {
+          function = "serial_led_data";
+          pins = "gpio3";
+        };
+
+        pinctrl_serial_led_clk: serial_led_clk-pins {
+          function = "serial_led_clk";
+          pins = "gpio4";
+        };
+      };
+
+      pinctrl_inet_led: inet_led-pins {
+        function = "inet_led";
+        pins = "gpio5";
+      };
+
+      pinctrl_ephy0_led: ephy0_led-pins {
+        function = "ephy0_led";
+        pins = "gpio6";
+      };
+
+      pinctrl_ephy1_led: ephy1_led-pins {
+        function = "ephy1_led";
+        pins = "gpio7";
+      };
+
+      pinctrl_ephy2_led: ephy2_led-pins {
+        function = "ephy2_led";
+        pins = "gpio8";
+      };
+
+      pinctrl_ephy3_led: ephy3_led-pins {
+        function = "ephy3_led";
+        pins = "gpio9";
+      };
+
+      pinctrl_robosw_led_data: robosw_led_data-pins {
+        function = "robosw_led_data";
+        pins = "gpio10";
+      };
+
+      pinctrl_robosw_led_clk: robosw_led_clk-pins {
+        function = "robosw_led_clk";
+        pins = "gpio11";
+      };
+
+      pinctrl_robosw_led0: robosw_led0-pins {
+        function = "robosw_led0";
+        pins = "gpio12";
+      };
+
+      pinctrl_robosw_led1: robosw_led1-pins {
+        function = "robosw_led1";
+        pins = "gpio13";
+      };
+
+      pinctrl_usb_device_led: usb_device_led-pins {
+        function = "usb_device_led";
+        pins = "gpio14";
+      };
+
+      pinctrl_pci: pci-pins {
+        pinctrl_pci_req1: pci_req1-pins {
+          function = "pci_req1";
+          pins = "gpio16";
+        };
+
+        pinctrl_pci_gnt1: pci_gnt1-pins {
+          function = "pci_gnt1";
+          pins = "gpio17";
+        };
+
+        pinctrl_pci_intb: pci_intb-pins {
+          function = "pci_intb";
+          pins = "gpio18";
+        };
+
+        pinctrl_pci_req0: pci_req0-pins {
+          function = "pci_req0";
+          pins = "gpio19";
+        };
+
+        pinctrl_pci_gnt0: pci_gnt0-pins {
+          function = "pci_gnt0";
+          pins = "gpio20";
+        };
+      };
+
+      pinctrl_pcmcia: pcmcia-pins {
+        pinctrl_pcmcia_cd1: pcmcia_cd1-pins {
+          function = "pcmcia_cd1";
+          pins = "gpio22";
+        };
+
+        pinctrl_pcmcia_cd2: pcmcia_cd2-pins {
+          function = "pcmcia_cd2";
+          pins = "gpio23";
+        };
+
+        pinctrl_pcmcia_vs1: pcmcia_vs1-pins {
+          function = "pcmcia_vs1";
+          pins = "gpio24";
+        };
+
+        pinctrl_pcmcia_vs2: pcmcia_vs2-pins {
+          function = "pcmcia_vs2";
+          pins = "gpio25";
+        };
+      };
+
+      pinctrl_ebi_cs2: ebi_cs2-pins {
+        function = "ebi_cs2";
+        pins = "gpio26";
+      };
+
+      pinctrl_ebi_cs3: ebi_cs3-pins {
+        function = "ebi_cs3";
+        pins = "gpio27";
+      };
+
+      pinctrl_spi_cs2: spi_cs2-pins {
+        function = "spi_cs2";
+        pins = "gpio28";
+      };
+
+      pinctrl_spi_cs3: spi_cs3-pins {
+        function = "spi_cs3";
+        pins = "gpio29";
+      };
+
+      pinctrl_spi_cs4: spi_cs4-pins {
+        function = "spi_cs4";
+        pins = "gpio30";
+      };
+
+      pinctrl_spi_cs5: spi_cs5-pins {
+        function = "spi_cs5";
+        pins = "gpio31";
+      };
+
+      pinctrl_uart1: uart1-pins {
+        function = "uart1";
+        group = "uart1_grp";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
new file mode 100644
index 000000000000..8d1e5b1cdd5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,ns-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar pins mux controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+  Some of Northstar SoCs's pins can be used for various purposes thanks to the
+  mux controller. This binding allows describing mux controller and listing
+  available functions. They can be referenced later by other bindings to let
+  system configure controller correctly.
+
+  A list of pins varies across chipsets so few bindings are available.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4708-pinmux
+      - brcm,bcm4709-pinmux
+      - brcm,bcm53012-pinmux
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: cru_gpio_control
+
+patternProperties:
+  '-pins$':
+    type: object
+    description: pin node
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ spi, i2c, pwm, uart1, mdio, uart2, sdio ]
+      groups:
+        minItems: 1
+        maxItems: 4
+        items:
+          enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp,
+                  uart1_grp, mdio_grp, uart2_grp, sdio_pwr_grp, sdio_1p8v_grp ]
+
+    required:
+      - function
+      - groups
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm4708-pinmux
+    then:
+      patternProperties:
+        '-pins$':
+          properties:
+            function:
+              enum: [ spi, i2c, pwm, uart1 ]
+            groups:
+              items:
+                enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp,
+                        uart1_grp ]
+
+required:
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@1800c1c0 {
+        compatible = "brcm,bcm4708-pinmux";
+        reg = <0x1800c1c0 0x24>;
+        reg-names = "cru_gpio_control";
+
+        spi-pins {
+            function = "spi";
+            groups = "spi_grp";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
index e295dda4bbba..40e0a9a19525 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
@@ -39,7 +39,7 @@ For example:
 		      <0x660009b0 0x40>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&nand_sel &uart3_rx &sdio0_d4>;
+		pinctrl-0 = <&nand_sel>, <&uart3_rx>, <&sdio0_d4>;
 
 		/* Select nand function */
 		nand_sel: nand_sel {
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
index 603564e5fe6f..dede11e4ef78 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
@@ -30,7 +30,7 @@ For example:
 		      <0x1803f408 0x04>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwm &gpio_b &nand_sel>;
+		pinctrl-0 = <&pwm>, <&gpio_b>, <&nand_sel>;
 
 		pwm: pwm {
 			function = "pwm";
diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
new file mode 100644
index 000000000000..a78cb2796001
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/canaan,k210-fpioa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 FPIOA
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description:
+  The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA)
+  controller allows assiging any of 256 possible functions to any of
+  48 IO pins of the SoC. Pin function configuration is performed on
+  a per-pin basis.
+
+properties:
+  compatible:
+    const: canaan,k210-fpioa
+
+  reg:
+    maxItems: 1
+    description:
+      Address and length of the register set for the FPIOA controller.
+
+  clocks:
+    items:
+      - description: Controller reference clock source
+      - description: APB interface clock source
+
+  clock-names:
+    items:
+      - const: ref
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  canaan,k210-sysctl-power:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle of the K210 system controller node
+          - description: offset of its power domain control register
+    description: |
+      phandle of the K210 system controller node and offset of its
+      power domain control register.
+
+patternProperties:
+  '-pinmux$':
+    type: object
+    $ref: /schemas/pinctrl/pinmux-node.yaml
+    description:
+      FPIOA client devices use sub-nodes to define the desired pin
+      configuration. Client device sub-nodes use the pinux property
+      below.
+
+    properties:
+      pinmux:
+        description:
+          List of IO pins alternate functions. The values for each IO
+          pin is a combination of an IO pin number (0 to 47) with the
+          desired function for the IO pin. Functions are defined as
+          macros in include/dt-bindings/pinctrl/k210-fpioa.h.
+          The K210_FPIOA(IO pin, function) macro is provided to
+          facilitate the combination of IO pin numbers and functions.
+
+    required:
+      - pinmux
+
+    additionalProperties: false
+
+  '-pins$':
+    type: object
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+    description:
+      FPIOA client devices use sub-nodes to define the desired
+      configuration of pins. Client device sub-nodes use the
+      properties below.
+
+    properties:
+      pins:
+        description:
+          List of IO pins affected by the properties specified in this
+          subnode. IO pins are identified using the pin names "IO_xx".
+          Pin configuration nodes can also define the power domain to
+          be used for the SoC pin groups A0 (IO pins 0-5),
+          A1 (IO pins 6-11), A2 (IO pins 12-17), B0 (IO pins 18-23),
+          B1 (IO pins 24-29), B2 (IO pins 30-35), B3 (IO pins 30-35),
+          C0 (IO pins 36-41) and C1 (IO pins 42-47) using the
+          power-source property.
+        items:
+          anyOf:
+            - pattern: "^(IO_([0-9]*))|(A[0-2])|(B[3-5])|(C[6-7])$"
+            - enum: [ IO_0, IO_1, IO_2, IO_3, IO_4, IO_5, IO_6, IO_7,
+                      IO_8, IO_9, IO_10, IO_11, IO_12, IO_13, IO_14,
+                      IO_15, IO_16, IO_17, IO_18, IO_19, IO_20, IO_21,
+                      IO_22, IO_23, IO_24, IO_25, IO_26, IO_27, IO_28,
+                      IO_29, IO_30, IO_31, IO_32, IO_33, IO_34, IO_35,
+                      IO_36, IO_37, IO_38, IO_39, IO_40, IO_41, IO_42,
+                      IO_43, IO_44, IO_45, IO_46, IO_47,
+                      A0, A1, A2, B3, B4, B5, C6, C7 ]
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      drive-strength: true
+
+      drive-strength-microamp: true
+
+      input-enable: true
+
+      input-disable: true
+
+      input-schmitt-enable: true
+
+      input-schmitt-disable: true
+
+      input-polarity-invert:
+        type: boolean
+        description:
+          Enable or disable pin input polarity inversion.
+
+      output-enable: true
+
+      output-disable: true
+
+      output-high: true
+
+      output-low: true
+
+      output-polarity-invert:
+        type: boolean
+        description:
+          Enable or disable pin output polarity inversion.
+
+      slew-rate: true
+
+      power-source: true
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - canaan,k210-sysctl-power
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/k210-fpioa.h>
+    #include <dt-bindings/clock/k210-clk.h>
+    #include <dt-bindings/reset/k210-rst.h>
+
+    fpioa: pinmux@502b0000 {
+      compatible = "canaan,k210-fpioa";
+      reg = <0x502b0000 0x100>;
+      clocks = <&sysclk K210_CLK_FPIOA>,
+               <&sysclk K210_CLK_APB0>;
+      clock-names = "ref", "pclk";
+      resets = <&sysrst K210_RST_FPIOA>;
+      canaan,k210-sysctl-power = <&sysctl 108>;
+      pinctrl-0 = <&jtag_pinctrl>;
+      pinctrl-names = "default";
+
+      jtag_pinctrl: jtag-pinmux {
+        pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+                 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+                 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+                 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
deleted file mode 100644
index a87447180e83..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,141 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform.  Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the pinctrl portion
-of the driver.
-
-Also see these documents for generic binding information:
-  [1] GPIO : ../gpio/gpio.txt
-  [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt
-
-And these for relevant defines:
-  [3] include/dt-bindings/pinctrl/lochnagar.h
-
-This binding must be part of the Lochnagar MFD binding:
-  [4] ../mfd/cirrus,lochnagar.txt
-
-Required properties:
-
-  - compatible : One of the following strings:
-                 "cirrus,lochnagar-pinctrl"
-
-  - gpio-controller : Indicates this device is a GPIO controller.
-  - #gpio-cells : Must be 2. The first cell is the pin number, see
-    [3] for available pins and the second cell is used to specify
-    optional parameters, see [1].
-  - gpio-ranges : Range of pins managed by the GPIO controller, see
-    [1]. Both the GPIO and Pinctrl base should be set to zero and the
-    count to the appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define,
-    see [3].
-
-  - pinctrl-names : A pinctrl state named "default" must be defined.
-  - pinctrl-0 : A phandle to the default pinctrl state.
-
-Required sub-nodes:
-
-The pin configurations are defined as a child of the pinctrl states
-node, see [2]. Each sub-node can have the following properties:
-  - groups : A list of groups to select (either this or "pins" must be
-    specified), available groups:
-      codec-aif1, codec-aif2, codec-aif3, dsp-aif1, dsp-aif2, psia1,
-      psia2, gf-aif1, gf-aif2, gf-aif3, gf-aif4, spdif-aif, usb-aif1,
-      usb-aif2, adat-aif, soundcard-aif
-  - pins : A list of pin names to select (either this or "groups" must
-    be specified), available pins:
-      fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5,
-      fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4,
-      codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1,
-      dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2,
-      gf-gpio3, gf-gpio7, codec-aif1-bclk, codec-aif1-rxdat,
-      codec-aif1-lrclk, codec-aif1-txdat, codec-aif2-bclk,
-      codec-aif2-rxdat, codec-aif2-lrclk, codec-aif2-txdat,
-      codec-aif3-bclk, codec-aif3-rxdat, codec-aif3-lrclk,
-      codec-aif3-txdat, dsp-aif1-bclk, dsp-aif1-rxdat, dsp-aif1-lrclk,
-      dsp-aif1-txdat, dsp-aif2-bclk, dsp-aif2-rxdat,
-      dsp-aif2-lrclk, dsp-aif2-txdat, psia1-bclk, psia1-rxdat,
-      psia1-lrclk, psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk,
-      psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat, gf-aif3-lrclk,
-      gf-aif3-txdat, gf-aif4-bclk, gf-aif4-rxdat, gf-aif4-lrclk,
-      gf-aif4-txdat, gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk,
-      gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat, gf-aif2-lrclk,
-      gf-aif2-txdat, dsp-uart1-rx, dsp-uart1-tx, dsp-uart2-rx,
-      dsp-uart2-tx, gf-uart2-rx, gf-uart2-tx, usb-uart-rx,
-      codec-pdmclk1, codec-pdmdat1, codec-pdmclk2, codec-pdmdat2,
-      codec-dmicclk1, codec-dmicdat1, codec-dmicclk2, codec-dmicdat2,
-      codec-dmicclk3, codec-dmicdat3, codec-dmicclk4, codec-dmicdat4,
-      dsp-dmicclk1, dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl,
-      i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, dsp-standby,
-      codec-mclk1, codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk,
-      gf-gpio1, gf-gpio5, dsp-gpio20, led1, led2
-  - function : The mux function to select, available functions:
-      aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5,
-      fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4,
-      codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1,
-      dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2,
-      gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5, dsp-gpio20, codec-clkout,
-      dsp-clkout, pmic-32k, spdif-clkout, clk-12m288, clk-11m2986,
-      clk-24m576, clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
-      gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1, codec-mclk2,
-      dsp-clkin, psia1-mclk, psia2-mclk, spdif-mclk, codec-irq,
-      codec-reset, dsp-reset, dsp-irq, dsp-standby, codec-pdmclk1,
-      codec-pdmdat1, codec-pdmclk2, codec-pdmdat2, codec-dmicclk1,
-      codec-dmicdat1, codec-dmicclk2, codec-dmicdat2, codec-dmicclk3,
-      codec-dmicdat3, codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1,
-      dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx,
-      dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx, gf-uart2-rx,
-      gf-uart2-tx, usb-uart-rx, usb-uart-tx, i2c2-scl, i2c2-sda,
-      i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, spdif-aif, psia1,
-      psia1-bclk, psia1-lrclk, psia1-rxdat, psia1-txdat, psia2,
-      psia2-bclk, psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1,
-      codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat,
-      codec-aif1-txdat, codec-aif2, codec-aif2-bclk, codec-aif2-lrclk,
-      codec-aif2-rxdat, codec-aif2-txdat, codec-aif3, codec-aif3-bclk,
-      codec-aif3-lrclk, codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1,
-      dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat, dsp-aif1-txdat,
-      dsp-aif2, dsp-aif2-bclk, dsp-aif2-lrclk, dsp-aif2-rxdat,
-      dsp-aif2-txdat, gf-aif3, gf-aif3-bclk, gf-aif3-lrclk,
-      gf-aif3-rxdat, gf-aif3-txdat, gf-aif4, gf-aif4-bclk,
-      gf-aif4-lrclk, gf-aif4-rxdat, gf-aif4-txdat, gf-aif1,
-      gf-aif1-bclk, gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat,
-      gf-aif2, gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat,
-      gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif, soundcard-aif,
-
-  - output-enable : Specifies that an AIF group will be used as a master
-    interface (either this or input-enable is required if a group is
-    being muxed to an AIF)
-  - input-enable : Specifies that an AIF group will be used as a slave
-    interface (either this or output-enable is required if a group is
-    being muxed to an AIF)
-
-Example:
-
-lochnagar-pinctrl {
-	compatible = "cirrus,lochnagar-pinctrl";
-
-	gpio-controller;
-	#gpio-cells = <2>;
-	gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pin-settings>;
-
-	pin-settings: pin-settings {
-		ap-aif {
-			input-enable;
-			groups = "gf-aif1";
-			function = "codec-aif3";
-		};
-		codec-aif {
-			output-enable;
-			groups = "codec-aif3";
-			function = "gf-aif1";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
new file mode 100644
index 000000000000..5cd512b7d5ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of various
+  application processor systems to provide a full evaluation platform.
+  Audio system topology, clocking and power can all be controlled through
+  the Lochnagar, allowing the device under test to be used in a variety of
+  possible use cases.
+
+  This binding document describes the binding for the pinctrl portion of
+  the driver.
+
+  Also see these documents for generic binding information:
+    [1] GPIO : ../gpio/gpio.txt
+    [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt
+
+  And these for relevant defines:
+    [3] include/dt-bindings/pinctrl/lochnagar.h
+
+  This binding must be part of the Lochnagar MFD binding:
+    [4] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number and the second cell is used
+      to specify optional parameters.
+    const: 2
+
+  gpio-ranges:
+    description:
+      Range of pins managed by the GPIO controller, see [1]. Both the
+      GPIO and Pinctrl base should be set to zero and the count to the
+      appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, see [3].
+    maxItems: 1
+
+  pin-settings:
+    type: object
+    patternProperties:
+      '-pins$':
+        description:
+          The pin configurations are defined as a child of the pinctrl
+          states node, see [2]. Each sub-node can have the following
+          properties.
+        type: object
+        allOf:
+          - $ref: pincfg-node.yaml#
+          - $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description:
+              A list of groups to select (either this or "pins" must be
+              specified), available groups.
+            enum: [ codec-aif1, codec-aif2, codec-aif3, dsp-aif1,
+                    dsp-aif2, psia1, psia2, gf-aif1, gf-aif2, gf-aif3,
+                    gf-aif4, spdif-aif, usb-aif1, usb-aif2, adat-aif,
+                    soundcard-aif ]
+
+          pins:
+            description:
+              A list of pin names to select (either this or "groups" must
+              be specified), available pins.
+            enum: [ fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
+                    fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
+                    codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
+                    codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
+                    dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
+                    gf-gpio2, gf-gpio3, gf-gpio7, codec-aif1-bclk,
+                    codec-aif1-rxdat, codec-aif1-lrclk, codec-aif1-txdat,
+                    codec-aif2-bclk, codec-aif2-rxdat, codec-aif2-lrclk,
+                    codec-aif2-txdat, codec-aif3-bclk, codec-aif3-rxdat,
+                    codec-aif3-lrclk, codec-aif3-txdat, dsp-aif1-bclk,
+                    dsp-aif1-rxdat, dsp-aif1-lrclk, dsp-aif1-txdat,
+                    dsp-aif2-bclk, dsp-aif2-rxdat, dsp-aif2-lrclk,
+                    dsp-aif2-txdat, psia1-bclk, psia1-rxdat, psia1-lrclk,
+                    psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk,
+                    psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat,
+                    gf-aif3-lrclk, gf-aif3-txdat, gf-aif4-bclk,
+                    gf-aif4-rxdat, gf-aif4-lrclk, gf-aif4-txdat,
+                    gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk,
+                    gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat,
+                    gf-aif2-lrclk, gf-aif2-txdat, dsp-uart1-rx,
+                    dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
+                    gf-uart2-rx, gf-uart2-tx, usb-uart-rx, codec-pdmclk1,
+                    codec-pdmdat1, codec-pdmclk2, codec-pdmdat2,
+                    codec-dmicclk1, codec-dmicdat1, codec-dmicclk2,
+                    codec-dmicdat2, codec-dmicclk3, codec-dmicdat3,
+                    codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1,
+                    dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl,
+                    i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda,
+                    dsp-standby, codec-mclk1, codec-mclk2, dsp-clkin,
+                    psia1-mclk, psia2-mclk, gf-gpio1, gf-gpio5,
+                    dsp-gpio20, led1, led2 ]
+
+          function:
+            description:
+              The mux function to select, available functions.
+            enum: [ aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
+                    fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
+                    codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
+                    codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
+                    dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
+                    gf-gpio2, gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5,
+                    dsp-gpio20, codec-clkout, dsp-clkout, pmic-32k,
+                    spdif-clkout, clk-12m288, clk-11m2986, clk-24m576,
+                    clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
+                    gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1,
+                    codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk,
+                    spdif-mclk, codec-irq, codec-reset, dsp-reset,
+                    dsp-irq, dsp-standby, codec-pdmclk1, codec-pdmdat1,
+                    codec-pdmclk2, codec-pdmdat2, codec-dmicclk1,
+                    codec-dmicdat1, codec-dmicclk2, codec-dmicdat2,
+                    codec-dmicclk3, codec-dmicdat3, codec-dmicclk4,
+                    codec-dmicdat4, dsp-dmicclk1, dsp-dmicdat1,
+                    dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx,
+                    dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
+                    gf-uart2-rx, gf-uart2-tx, usb-uart-rx, usb-uart-tx,
+                    i2c2-scl, i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl,
+                    i2c4-sda, spdif-aif, psia1, psia1-bclk, psia1-lrclk,
+                    psia1-rxdat, psia1-txdat, psia2, psia2-bclk,
+                    psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1,
+                    codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat,
+                    codec-aif1-txdat, codec-aif2, codec-aif2-bclk,
+                    codec-aif2-lrclk, codec-aif2-rxdat, codec-aif2-txdat,
+                    codec-aif3, codec-aif3-bclk, codec-aif3-lrclk,
+                    codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1,
+                    dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat,
+                    dsp-aif1-txdat, dsp-aif2, dsp-aif2-bclk,
+                    dsp-aif2-lrclk, dsp-aif2-rxdat, dsp-aif2-txdat,
+                    gf-aif3, gf-aif3-bclk, gf-aif3-lrclk, gf-aif3-rxdat,
+                    gf-aif3-txdat, gf-aif4, gf-aif4-bclk, gf-aif4-lrclk,
+                    gf-aif4-rxdat, gf-aif4-txdat, gf-aif1, gf-aif1-bclk,
+                    gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat, gf-aif2,
+                    gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat,
+                    gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif,
+                    soundcard-aif ]
+
+          output-enable:
+            description:
+              Specifies that an AIF group will be used as a master
+              interface (either this or input-enable is required if a
+              group is being muxed to an AIF)
+
+          input-enable:
+            description:
+              Specifies that an AIF group will be used as a slave
+              interface (either this or output-enable is required if a
+              group is being muxed to an AIF)
+
+        additionalProperties: false
+
+        required:
+          - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - pinctrl-0
+  - pinctrl-names
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
deleted file mode 100644
index b0e36cf0d289..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Cirrus Logic Madera class audio codecs pinctrl driver
-
-The Cirrus Logic Madera codecs provide a number of GPIO functions for
-interfacing to external hardware and to provide logic outputs to other devices.
-Certain groups of GPIO pins also have an alternate function, normally as an
-audio interface.
-
-The set of available GPIOs, functions and alternate function groups differs
-between codecs so refer to the datasheet for the codec for further information
-on what is supported on that device.
-
-The properties for this driver exist within the parent MFD driver node.
-
-See also
-  the core bindings for the parent MFD driver:
-    Documentation/devicetree/bindings/mfd/madera.txt
-
-  the generic pinmix bindings:
-    Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Required properties of parent mfd node:
-  - pinctrl-names : must be "default"
-  - pinctrl-0 : a phandle to the node containing the subnodes containing default
-      configurations
-
-Required subnodes:
-  One subnode is required to contain the default settings. It contains an
-  arbitrary number of configuration subnodes, one for each group or pin
-  configuration you want to apply as a default.
-
-Required properties of configuration subnodes:
-  - groups : name of one pin group to configure. One of:
-	aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2,
-	dmic4, dmic5, dmic6,
-	gpio1, gpio2, ..., gpio40
-    The gpioN groups select the single pin of this name for configuration
-
-Optional properties of configuration subnodes:
-  Any configuration option not explicitly listed in the dts will be left at
-  chip default setting.
-
-  - function : name of function to assign to this group. One of:
-	aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2,
-	dmic3, dmic4, dmic5, dmic6,
-	io, dsp-gpio, irq1, irq2,
-	fll1-clk, fll1-lock, fll2-clk, fll2-lock, fll3-clk, fll3-lock,
-	fllao-clk, fllao-lock,
-	opclk, opclk-async, pwm1, pwm2, spdif,
-	asrc1-in1-lock, asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock,
-	spkl-short-circuit, spkr-short-circuit, spk-shutdown,
-	spk-overheat-shutdown, spk-overheat-warn,
-	timer1-sts, timer2-sts, timer3-sts, timer4-sts, timer5-sts, timer6-sts,
-	timer7-sts, timer8-sts,
-	log1-fifo-ne, log2-fifo-ne, log3-fifo-ne, log4-fifo-ne, log5-fifo-ne,
-	log6-fifo-ne, log7-fifo-ne, log8-fifo-ne,
-
-  - bias-disable : disable pull-up and pull-down
-  - bias-bus-hold : enable buskeeper
-  - bias-pull-up : output is pulled-up
-  - bias-pull-down : output is pulled-down
-  - drive-push-pull : CMOS output
-  - drive-open-drain : open-drain output
-  - drive-strength : drive strength in mA. Valid values are 4 or 8
-  - input-schmitt-enable : enable schmitt-trigger mode
-  - input-schmitt-disable : disable schmitt-trigger mode
-  - input-debounce : A value of 0 disables debounce, a value !=0 enables
-	debounce
-  - output-low : set the pin to output mode with low level
-  - output-high : set the pin to output mode with high level
-
-Example:
-
-cs47l85@0 {
-	compatible = "cirrus,cs47l85";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&cs47l85_defaults>;
-
-	cs47l85_defaults: cs47l85-gpio-defaults {
-		aif1 {
-			groups = "aif1";
-			function = "aif1";
-			bias-bus-hold;
-		};
-
-		aif2 {
-			groups = "aif2";
-			function = "aif2";
-			bias-bus-hold;
-		};
-
-		opclk {
-			groups = "gpio1";
-			function = "opclk";
-			bias-pull-up;
-			drive-strength = <8>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
new file mode 100644
index 000000000000..6bd42e43cdab
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cirrus,madera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Madera class audio CODECs pinctrl driver
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  The Cirrus Logic Madera codecs provide a number of GPIO functions for
+  interfacing to external hardware and to provide logic outputs to other devices.
+  Certain groups of GPIO pins also have an alternate function, normally as an
+  audio interface.
+
+  The set of available GPIOs, functions and alternate function groups differs
+  between CODECs so refer to the datasheet for the CODEC for further information
+  on what is supported on that device.
+
+  The properties for this driver exist within the parent MFD driver node.
+
+  See also the core bindings for the parent MFD driver:
+
+    Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+
+  And the generic pinmix bindings:
+
+    Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+properties:
+  pin-settings:
+    description:
+      One subnode is required to contain the default settings. It
+      contains an arbitrary number of configuration subnodes, one for
+      each group or pin configuration you want to apply as a default.
+    type: object
+    patternProperties:
+      '-pins$':
+        type: object
+        allOf:
+          - $ref: "pincfg-node.yaml#"
+          - $ref: "pinmux-node.yaml#"
+        properties:
+          groups:
+            description:
+              Name of one pin group to configure.
+            enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1,
+                    pdmspk2, dmic4, dmic5, dmic6, gpio1, gpio2, gpio3,
+                    gpio4, gpio5, gpio6, gpio7, gpio8, gpio9,
+                    gpio10, gpio11, gpio12, gpio13, gpio14, gpio15,
+                    gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
+                    gpio22, gpio23, gpio24, gpio25, gpio26, gpio27,
+                    gpio28, gpio29, gpio30, gpio31, gpio32, gpio33,
+                    gpio34, gpio35, gpio36, gpio37, gpio38, gpio39 ]
+
+          function:
+            description:
+              Name of function to assign to this group.
+            enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3,
+                    pdmspk1, pdmspk2, dmic3, dmic4, dmic5,
+                    dmic6, io, dsp-gpio, irq1, irq2, fll1-clk,
+                    fll1-lock, fll2-clk, fll2-lock, fll3-clk,
+                    fll3-lock, fllao-clk, fllao-lock, opclk,
+                    opclk-async, pwm1, pwm2, spdif, asrc1-in1-lock,
+                    asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock,
+                    spkl-short-circuit, spkr-short-circuit,
+                    spk-shutdown, spk-overheat-shutdown,
+                    spk-overheat-warn, timer1-sts, timer2-sts,
+                    timer3-sts, timer4-sts, timer5-sts, timer6-sts,
+                    timer7-sts, timer8-sts, log1-fifo-ne,
+                    log2-fifo-ne, log3-fifo-ne, log4-fifo-ne,
+                    log5-fifo-ne, log6-fifo-ne, log7-fifo-ne,
+                    log8-fifo-ne ]
+
+          bias-disable: true
+
+          bias-bus-hold: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          drive-push-pull: true
+
+          drive-open-drain: true
+
+          drive-strength:
+            enum: [ 4, 8 ]
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          input-debounce: true
+
+          output-low: true
+
+          output-high: true
+
+        additionalProperties: false
+
+        required:
+          - groups
+
+    additionalProperties: false
+
+required:
+  - pinctrl-0
+  - pinctrl-names
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
new file mode 100644
index 000000000000..915cbbcc3555
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cypress,cy8c95x0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress CY8C95X0 I2C GPIO expander
+
+maintainers:
+  - Patrick Rudolph <patrick.rudolph@9elements.com>
+
+description: |
+  This supports the 20/40/60 pin Cypress CYC95x0 GPIO I2C expanders.
+  Pin function configuration is performed on a per-pin basis.
+
+properties:
+  compatible:
+    enum:
+      - cypress,cy8c9520
+      - cypress,cy8c9540
+      - cypress,cy8c9560
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the GPIO number and the second cell specifies GPIO
+      flags, as defined in <dt-bindings/gpio/gpio.h>.
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-line-names: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Optional power supply.
+
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: pincfg-node.yaml#
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: '^gp([0-7][0-7])$'
+        minItems: 1
+        maxItems: 60
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, pwm ]
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+      drive-push-pull: true
+
+      drive-open-drain: true
+
+      drive-open-source: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pinctrl@20 {
+        compatible = "cypress,cy8c9520";
+        reg = <0x20>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        vdd-supply = <&p3v3>;
+        gpio-reserved-ranges = <5 1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
deleted file mode 100644
index 8ac1d0851a0f..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-* Freescale i.MX7 Dual IOMUX Controller
-
-iMX7D supports two iomuxc controllers, fsl,imx7d-iomuxc controller is similar
-as previous iMX SoC generation and fsl,imx7d-iomuxc-lpsr which provides low
-power state retention capabilities on gpios that are part of iomuxc-lpsr
-(GPIO1_IO7..GPIO1_IO0). While iomuxc-lpsr provides its own set of registers for
-mux and pad control settings, it shares the input select register from main
-iomuxc controller for daisy chain settings, the fsl,input-sel property extends
-fsl,imx-pinctrl driver to support iomuxc-lpsr controller.
-
-iomuxc_lpsr: iomuxc-lpsr@302c0000 {
-	compatible = "fsl,imx7d-iomuxc-lpsr";
-	reg = <0x302c0000 0x10000>;
-	fsl,input-sel = <&iomuxc>;
-};
-
-iomuxc: iomuxc@30330000 {
-	compatible = "fsl,imx7d-iomuxc";
-	reg = <0x30330000 0x10000>;
-};
-
-Peripherals using pads from iomuxc-lpsr support low state retention power
-state, under LPSR mode GPIO's state of pads are retain.
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx7d-iomuxc" for main IOMUXC controller, or
-  "fsl,imx7d-iomuxc-lpsr" for Low Power State Retention IOMUXC controller.
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
-  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
-  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
-  imx7d-pinfunc.h under device tree source folder.  The last integer CONFIG is
-  the pad setting value like pull-up on this pin.  Please refer to i.MX7 Dual
-  Reference Manual for detailed CONFIG settings.
-- fsl,input-sel: required property for iomuxc-lpsr controller, this property is
-  a phandle for main iomuxc controller which shares the input select register for
-  daisy chain settings.
-
-CONFIG bits definition:
-PAD_CTL_PUS_100K_DOWN           (0 << 5)
-PAD_CTL_PUS_5K_UP               (1 << 5)
-PAD_CTL_PUS_47K_UP              (2 << 5)
-PAD_CTL_PUS_100K_UP             (3 << 5)
-PAD_CTL_PUE                     (1 << 4)
-PAD_CTL_HYS                     (1 << 3)
-PAD_CTL_SRE_SLOW                (1 << 2)
-PAD_CTL_SRE_FAST                (0 << 2)
-PAD_CTL_DSE_X1                  (0 << 0)
-PAD_CTL_DSE_X4                  (1 << 0)
-PAD_CTL_DSE_X2                  (2 << 0)
-PAD_CTL_DSE_X6                  (3 << 0)
-
-Examples:
-While iomuxc-lpsr is intended to be used by dedicated peripherals to take
-advantages of LPSR power mode, is also possible that an IP to use pads from
-any of the iomux controllers. For example the I2C1 IP can use SCL pad from
-iomuxc-lpsr controller and SDA pad from iomuxc controller as:
-
-i2c1: i2c@30a20000 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1 &pinctrl_i2c1_2>;
-};
-
-iomuxc-lpsr@302c0000 {
-	compatible = "fsl,imx7d-iomuxc-lpsr";
-	reg = <0x302c0000 0x10000>;
-	fsl,input-sel = <&iomuxc>;
-
-	pinctrl_i2c1_1: i2c1grp-1 {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f
-		>;
-	};
-};
-
-iomuxc@30330000 {
-	compatible = "fsl,imx7d-iomuxc";
-	reg = <0x30330000 0x10000>;
-
-	pinctrl_i2c1_2: i2c1grp-2 {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
-		>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
new file mode 100644
index 000000000000..621038662188
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx7d-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX7D IOMUX Controller
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx7d-iomuxc
+          - fsl,imx7d-iomuxc-lpsr
+
+  reg:
+    maxItems: 1
+
+  fsl,input-sel:
+    description:
+      phandle for main iomuxc controller which shares the input select
+      register for daisy chain settings.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm/boot/dts/imx7d-pinfunc.h>. The last integer
+          CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX7D Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx7d-iomuxc-lpsr
+
+then:
+  required:
+    - fsl,input-sel
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: pinctrl@30330000 {
+      compatible = "fsl,imx7d-iomuxc";
+      reg = <0x30330000 0x10000>;
+
+      pinctrl_uart5: uart5grp {
+        fsl,pins =
+          <0x0160 0x03D0 0x0714 0x1 0x0	0x7e>,
+          <0x0164 0x03D4 0x0000 0x1 0x0	0x76>;
+      };
+    };
+  - |
+    iomuxc_lpsr: pinctrl@302c0000 {
+      compatible = "fsl,imx7d-iomuxc-lpsr";
+      reg = <0x302c0000 0x10000>;
+      fsl,input-sel = <&iomuxc>;
+
+      pinctrl_gpio_lpsr: gpio1-grp {
+          fsl,pins =
+            <0x0008 0x0038 0x0000 0x0 0x0	0x59>,
+            <0x000C 0x003C 0x0000 0x0 0x0	0x59>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
deleted file mode 100644
index e4e01c05cf83..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Freescale IMX8MM IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
-for common binding part and usage.
-
-Required properties:
-- compatible: "fsl,imx8mm-iomuxc"
-- reg: should contain the base physical address and size of the iomuxc
-  registers.
-
-Required properties in sub-nodes:
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
-  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
-  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
-  <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last integer CONFIG is
-  the pad setting value like pull-up on this pin.  Please refer to i.MX8M Mini
-  Reference Manual for detailed CONFIG settings.
-
-Examples:
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart1>;
-};
-
-iomuxc: pinctrl@30330000 {
-        compatible = "fsl,imx8mm-iomuxc";
-        reg = <0x0 0x30330000 0x0 0x10000>;
-
-        pinctrl_uart1: uart1grp {
-                fsl,pins = <
-                        MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX             0x140
-                        MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX             0x140
-                >;
-        };
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
new file mode 100644
index 000000000000..6717f163390b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mm-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8MM IOMUX Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imx8mm-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8M Mini Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@30330000 {
+        compatible = "fsl,imx8mm-iomuxc";
+        reg = <0x30330000 0x10000>;
+
+        pinctrl_uart2: uart2grp {
+            fsl,pins =
+                <0x23C 0x4A4 0x4FC 0x0 0x0	0x140>,
+                <0x240 0x4A8 0x000 0x0 0x0	0x140>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt
deleted file mode 100644
index 330716c971b9..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-* Freescale IMX8MN IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
-for common binding part and usage.
-
-Required properties:
-- compatible: "fsl,imx8mn-iomuxc"
-- reg: should contain the base physical address and size of the iomuxc
-  registers.
-
-Required properties in sub-nodes:
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
-  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
-  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
-  <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last integer CONFIG is
-  the pad setting value like pull-up on this pin. Please refer to i.MX8M Nano
-  Reference Manual for detailed CONFIG settings.
-
-Examples:
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart1>;
-};
-
-iomuxc: pinctrl@30330000 {
-        compatible = "fsl,imx8mn-iomuxc";
-        reg = <0x0 0x30330000 0x0 0x10000>;
-
-        pinctrl_uart1: uart1grp {
-                fsl,pins = <
-			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
-			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
-			MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
-			MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
-			MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6	0x19
-                >;
-        };
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
new file mode 100644
index 000000000000..b1cdbb56d4e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mn-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8MN IOMUX Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imx8mn-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8M Nano Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@30330000 {
+        compatible = "fsl,imx8mn-iomuxc";
+        reg = <0x30330000 0x10000>;
+
+        pinctrl_uart2: uart2grp {
+            fsl,pins =
+                <0x23C 0x4A4 0x4FC 0x0 0x0	0x140>,
+                <0x240 0x4A8 0x000 0x0 0x0	0x140>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
index 2e31e120395e..4eed3a4e153a 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
@@ -30,8 +30,6 @@ patternProperties:
 
     properties:
       fsl,pins:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
         description:
           each entry consists of 6 integers and represents the mux and config
           setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
@@ -39,12 +37,30 @@ patternProperties:
           be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
           integer CONFIG is the pad setting value like pull-up on this pin. Please
           refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
 
     required:
       - fsl,pins
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -59,10 +75,9 @@ examples:
         reg = <0x30330000 0x10000>;
 
         pinctrl_uart2: uart2grp {
-            fsl,pins = <
-                0x228 0x488 0x5F0 0x0 0x6	0x49
-                0x228 0x488 0x000 0x0 0x0	0x49
-            >;
+            fsl,pins =
+                <0x228 0x488 0x5F0 0x0 0x6	0x49>,
+                <0x228 0x488 0x000 0x0 0x0	0x49>;
         };
     };
 
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
deleted file mode 100644
index 66de75090458..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Freescale IMX8MQ IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
-for common binding part and usage.
-
-Required properties:
-- compatible: "fsl,imx8mq-iomuxc"
-- reg: should contain the base physical address and size of the iomuxc
-  registers.
-
-Required properties in sub-nodes:
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
-  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
-  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
-  imx8mq-pinfunc.h under device tree source folder.  The last integer CONFIG is
-  the pad setting value like pull-up on this pin.  Please refer to i.MX8M Quad
-  Reference Manual for detailed CONFIG settings.
-
-Examples:
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart1>;
-};
-
-iomuxc: pinctrl@30330000 {
-        compatible = "fsl,imx8mq-iomuxc";
-        reg = <0x0 0x30330000 0x0 0x10000>;
-
-        pinctrl_uart1: uart1grp {
-                fsl,pins = <
-                        MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX             0x49
-                        MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX             0x49
-                >;
-        };
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
new file mode 100644
index 000000000000..d4a8ea5551a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mq-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8MQ IOMUX Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imx8mq-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8M Quad Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@30330000 {
+        compatible = "fsl,imx8mq-iomuxc";
+        reg = <0x30330000 0x10000>;
+
+        pinctrl_uart1: uart1grp {
+            fsl,pins =
+                <0x234 0x49C 0x4F4 0x0 0x0	0x49>,
+                <0x238 0x4A0 0x4F4 0x0 0x0	0x49>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
new file mode 100644
index 000000000000..693398d88223
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8ulp-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8ULP IOMUX Controller
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imx8ulp-iomuxc1
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 5 integers and represents the mux and config
+          setting for one pin. The first 4 integers <mux_config_reg input_reg
+          mux_mode input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8ULP Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_config_reg" indicates the offset of mux register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_mode" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@298c0000 {
+        compatible = "fsl,imx8ulp-iomuxc1";
+        reg = <0x298c0000 0x10000>;
+
+        pinctrl_lpuart5: lpuart5grp {
+            fsl,pins =
+                <0x0138 0x08F0 0x4 0x3	0x3>,
+                <0x013C 0x08EC 0x4 0x3	0x3>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
new file mode 100644
index 000000000000..66baa6082a4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx93-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX93 IOMUX Controller
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+properties:
+  compatible:
+    const: fsl,imx93-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@443c0000 {
+        compatible = "fsl,imx93-iomuxc";
+        reg = <0x30330000 0x10000>;
+
+        pinctrl_uart3: uart3grp {
+            fsl,pins =
+                <0x48 0x1f8 0x41c 0x1 0x0	0x49>,
+                <0x4c 0x1fc 0x418 0x1 0x0	0x49>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml
new file mode 100644
index 000000000000..1278f7293560
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMXRT1050 IOMUX Controller
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imxrt1050-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <include/dt-bindings/pinctrl/pins-imxrt1050.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MXRT1050 Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: iomuxc@401f8000 {
+        compatible = "fsl,imxrt1050-iomuxc";
+        reg = <0x401f8000 0x4000>;
+
+        pinctrl_lpuart1: lpuart1grp {
+            fsl,pins =
+              <0x0EC 0x2DC 0x000 0x2 0x0	0xf1>,
+              <0x0F0 0x2E0 0x000 0x2 0x0	0xf1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml
new file mode 100644
index 000000000000..2e880b3e537c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1170.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MXRT1170 IOMUX Controller
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imxrt1170-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm/boot/dts/imxrt1170-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MXRT1170 Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: iomuxc@400e8000 {
+        compatible = "fsl,imxrt1170-iomuxc";
+        reg = <0x400e8000 0x4000>;
+        pinctrl_lpuart1: lpuart1grp {
+            fsl,pins =
+              <0x16C 0x3B0 0x620 0x0 0x0  0xf1>,
+              <0x170 0x3B4 0x61C 0x0 0x0	0xf1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml
new file mode 100644
index 000000000000..45ea565ce238
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Pinctrl bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  This binding uses the i.MX common pinctrl binding.
+  (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt)
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-iomuxc
+      - fsl,imx8qxp-iomuxc
+      - fsl,imx8dxl-iomuxc
+
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 3 integers and represents the pin ID, the mux value
+          and pad setting for the pin. The first 2 integers - pin_id and mux_val - are
+          specified using a PIN_FUNC_ID macro, which can be found in
+          <include/dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer is
+          the pad setting value like pull-up on this pin. Please refer to the
+          appropriate i.MX8 Reference Manual for detailed pad CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "pin_id" indicates the pin ID
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl {
+        compatible = "fsl,imx8qxp-iomuxc";
+
+        pinctrl_lpuart0: lpuart0grp {
+            fsl,pins = <
+                111 0 0x06000020
+                112 0 0x06000020
+            >;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
deleted file mode 100644
index d9b2100c98e8..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Ingenic XBurst pin controller
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-For the XBurst SoCs, pin control is tightly bound with GPIO ports. All pins may
-be used as GPIOs, multiplexed device functions are configured within the
-GPIO port configuration registers and it is typical to refer to pins using the
-naming scheme "PxN" where x is a character identifying the GPIO port with
-which the pin is associated and N is an integer from 0 to 31 identifying the
-pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and
-PB31 is the last pin in GPIO port B. The jz4740, the x1000 and the x1830
-contains 4 GPIO ports, PA to PD, for a total of 128 pins. The jz4760, the
-jz4770 and the jz4780 contains 6 GPIO ports, PA to PF, for a total of 192 pins.
-
-
-Required properties:
---------------------
-
- - compatible: One of:
-    - "ingenic,jz4740-pinctrl"
-    - "ingenic,jz4725b-pinctrl"
-    - "ingenic,jz4760-pinctrl"
-    - "ingenic,jz4760b-pinctrl"
-    - "ingenic,jz4770-pinctrl"
-    - "ingenic,jz4780-pinctrl"
-    - "ingenic,x1000-pinctrl"
-    - "ingenic,x1000e-pinctrl"
-    - "ingenic,x1500-pinctrl"
-    - "ingenic,x1830-pinctrl"
- - reg: Address range of the pinctrl registers.
-
-
-Required properties for sub-nodes (GPIO chips):
------------------------------------------------
-
- - compatible: Must contain one of:
-    - "ingenic,jz4740-gpio"
-    - "ingenic,jz4760-gpio"
-    - "ingenic,jz4770-gpio"
-    - "ingenic,jz4780-gpio"
-    - "ingenic,x1000-gpio"
-    - "ingenic,x1830-gpio"
- - reg: The GPIO bank number.
- - interrupt-controller: Marks the device node as an interrupt controller.
- - interrupts: Interrupt specifier for the controllers interrupt.
- - #interrupt-cells: Should be 2. Refer to
-   ../interrupt-controller/interrupts.txt for more details.
- - gpio-controller: Marks the device node as a GPIO controller.
- - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
-    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
-    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
- - gpio-ranges: Range of pins managed by the GPIO controller. Refer to
-   ../gpio/gpio.txt for more details.
-
-
-Example:
---------
-
-pinctrl: pin-controller@10010000 {
-	compatible = "ingenic,jz4740-pinctrl";
-	reg = <0x10010000 0x400>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	gpa: gpio@0 {
-		compatible = "ingenic,jz4740-gpio";
-		reg = <0>;
-
-		gpio-controller;
-		gpio-ranges = <&pinctrl 0 0 32>;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <28>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
new file mode 100644
index 000000000000..c2c370448b81
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ingenic,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs pin controller devicetree bindings
+
+description: >
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of the
+  phrase "pin configuration node".
+
+  For the Ingenic SoCs, pin control is tightly bound with GPIO ports. All pins
+  may be used as GPIOs, multiplexed device functions are configured within the
+  GPIO port configuration registers and it is typical to refer to pins using the
+  naming scheme "PxN" where x is a character identifying the GPIO port with
+  which the pin is associated and N is an integer from 0 to 31 identifying the
+  pin within that GPIO port. For example PA0 is the first pin in GPIO port A,
+  and PB31 is the last pin in GPIO port B. The JZ4730, the JZ4740, the JZ4725B,
+  the X1000 and the X1830 contains 4 GPIO ports, PA to PD, for a total of 128
+  pins. The X2000 and the X2100 contains 5 GPIO ports, PA to PE, for a total of
+  160 pins. The JZ4750, the JZ4755 the JZ4760, the JZ4770 and the JZ4780 contains
+  6 GPIO ports, PA to PF, for a total of 192 pins. The JZ4775 contains 7 GPIO
+  ports, PA to PG, for a total of 224 pins.
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4730-pinctrl
+          - ingenic,jz4740-pinctrl
+          - ingenic,jz4725b-pinctrl
+          - ingenic,jz4750-pinctrl
+          - ingenic,jz4755-pinctrl
+          - ingenic,jz4760-pinctrl
+          - ingenic,jz4770-pinctrl
+          - ingenic,jz4775-pinctrl
+          - ingenic,jz4780-pinctrl
+          - ingenic,x1000-pinctrl
+          - ingenic,x1500-pinctrl
+          - ingenic,x1830-pinctrl
+          - ingenic,x2000-pinctrl
+          - ingenic,x2100-pinctrl
+      - items:
+          - const: ingenic,jz4760b-pinctrl
+          - const: ingenic,jz4760-pinctrl
+      - items:
+          - const: ingenic,x1000e-pinctrl
+          - const: ingenic,x1000-pinctrl
+      - items:
+          - const: ingenic,x2000e-pinctrl
+          - const: ingenic,x2000-pinctrl
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^gpio@[0-9]$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - ingenic,jz4730-gpio
+          - ingenic,jz4740-gpio
+          - ingenic,jz4725b-gpio
+          - ingenic,jz4750-gpio
+          - ingenic,jz4755-gpio
+          - ingenic,jz4760-gpio
+          - ingenic,jz4770-gpio
+          - ingenic,jz4775-gpio
+          - ingenic,jz4780-gpio
+          - ingenic,x1000-gpio
+          - ingenic,x1500-gpio
+          - ingenic,x1830-gpio
+          - ingenic,x2000-gpio
+          - ingenic,x2100-gpio
+
+      reg:
+        items:
+          - description: The GPIO bank number
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+
+      gpio-ranges:
+        maxItems: 1
+
+      interrupt-controller: true
+
+      "#interrupt-cells":
+        const: 2
+        description:
+          Refer to ../interrupt-controller/interrupts.txt for more details.
+
+      interrupts:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - "#gpio-cells"
+      - interrupts
+      - interrupt-controller
+      - "#interrupt-cells"
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      properties:
+        phandle: true
+        function: true
+        groups: true
+        pins: true
+        bias-disable: true
+        bias-pull-up: true
+        bias-pull-down: true
+        output-low: true
+        output-high: true
+      additionalProperties: false
+
+    - type: object
+      properties:
+        phandle: true
+      additionalProperties:
+        type: object
+        allOf:
+          - $ref: pincfg-node.yaml#
+          - $ref: pinmux-node.yaml#
+
+        properties:
+          phandle: true
+          function: true
+          groups: true
+          pins: true
+          bias-disable: true
+          bias-pull-up: true
+          bias-pull-down: true
+          output-low: true
+          output-high: true
+        additionalProperties: false
+
+examples:
+  - |
+    pinctrl@10010000 {
+      compatible = "ingenic,jz4770-pinctrl";
+      reg = <0x10010000 0x600>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      gpio@0 {
+        compatible = "ingenic,jz4770-gpio";
+        reg = <0>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 32>;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&intc>;
+        interrupts = <17>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
index cd2b436350ef..b42548350188 100644
--- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
@@ -24,12 +24,10 @@ properties:
 patternProperties:
   '-pins$':
     type: object
-    allOf:
-      - $ref: pincfg-node.yaml#
-      - $ref: pinmux-node.yaml#
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
+    $ref: pinmux-node.yaml#
 
     properties:
       function: true
@@ -49,6 +47,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml
new file mode 100644
index 000000000000..005d95a9e4d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-keembay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay pin controller
+
+maintainers:
+  - Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
+
+description: |
+  Intel Keem Bay SoC integrates a pin controller which enables control
+  of pin directions, input/output values and configuration
+  for a total of 80 pins.
+
+properties:
+  compatible:
+    const: intel,keembay-pinctrl
+
+  reg:
+    maxItems: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  ngpios:
+    description: The number of GPIOs exposed.
+    const: 80
+
+  interrupts:
+    description:
+      Specifies the interrupt lines to be used by the controller.
+      Each interrupt line is shared by upto 4 GPIO lines.
+    maxItems: 8
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+patternProperties:
+  '^gpio@[0-9a-f]*$':
+    type: object
+    additionalProperties: false
+
+    description:
+      Child nodes can be specified to contain pin configuration information,
+      which can then be utilized by pinctrl client devices.
+      The following properties are supported.
+
+    properties:
+      pins:
+        description: |
+          The name(s) of the pins to be configured in the child node.
+          Supported pin names are "GPIO0" up to "GPIO79".
+
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      drive-strength:
+        description: IO pads drive strength in milli Ampere.
+        enum: [2, 4, 8, 12]
+
+      bias-bus-hold:
+        type: boolean
+
+      input-schmitt-enable:
+        type: boolean
+
+      slew-rate:
+        description: GPIO slew rate control.
+                      0 - Fast(~100MHz)
+                      1 - Slow(~50MHz)
+        enum: [0, 1]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - ngpios
+  - '#gpio-cells'
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    // Example 1
+    gpio@0 {
+        compatible = "intel,keembay-pinctrl";
+        reg = <0x600b0000 0x88>,
+              <0x600b0190 0x1ac>;
+        gpio-controller;
+        ngpios = <0x50>;
+        #gpio-cells = <0x2>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    // Example 2
+    gpio@1 {
+        compatible = "intel,keembay-pinctrl";
+        reg = <0x600c0000 0x88>,
+              <0x600c0190 0x1ac>;
+        gpio-controller;
+        ngpios = <0x50>;
+        #gpio-cells = <0x2>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml
new file mode 100644
index 000000000000..f001add16814
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-thunderbay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Thunder Bay pin controller
+
+maintainers:
+  - Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
+
+description: |
+  Intel Thunder Bay SoC integrates a pin controller which enables control
+  of pin directions, input/output values and configuration
+  for a total of 67 pins.
+
+properties:
+  compatible:
+    const: intel,thunderbay-pinctrl
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Specifies the interrupt lines to be used by the controller.
+    maxItems: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+patternProperties:
+  '^gpio@[0-9a-f]*$':
+    type: object
+    additionalProperties: false
+
+    description:
+      Child nodes can be specified to contain pin configuration information,
+      which can then be utilized by pinctrl client devices.
+      The following properties are supported.
+
+    properties:
+      pins:
+        description: |
+          The name(s) of the pins to be configured in the child node.
+          Supported pin names are "GPIO0" up to "GPIO66".
+
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      drive-strength:
+        description: Drive strength for the pad.
+        enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
+
+      bias-bus-hold:
+        type: boolean
+
+      input-schmitt-enable:
+        type: boolean
+
+      slew-rate:
+        description: GPIO slew rate control.
+                      0 - Slow
+                      1 - Fast
+        enum: [0, 1]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    // Example 1
+    pinctrl0: gpio@0 {
+        compatible = "intel,thunderbay-pinctrl";
+        reg = <0x600b0000 0x88>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&pinctrl0 0 0 67>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    // Example 2
+    pinctrl1: gpio@1 {
+        compatible = "intel,thunderbay-pinctrl";
+        reg = <0x600c0000 0x88>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&pinctrl1 0 0 53>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
new file mode 100644
index 000000000000..491f67e7cc4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/marvell,ac5-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell AC5 pin controller
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+description:
+  Bindings for Marvell's AC5 memory-mapped pin controller.
+
+properties:
+  compatible:
+    items:
+      - const: marvell,ac5-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+    additionalProperties: false
+
+    properties:
+      marvell,function:
+        $ref: "/schemas/types.yaml#/definitions/string"
+        description:
+          Indicates the function to select.
+        enum: [ dev_init_done, ge, gpio, i2c0, i2c1, int_out, led, nand, pcie, ptp, sdio,
+                spi0, spi1, synce, tsen_int, uart0, uart1, uart2, uart3, uartsd, wd_int, xg ]
+
+      marvell,pins:
+        $ref: /schemas/types.yaml#/definitions/string-array
+        description:
+          Array of MPP pins to be used for the given function.
+        minItems: 1
+        items:
+          enum: [ mpp0, mpp1, mpp2, mpp3, mpp4, mpp5, mpp6, mpp7, mpp8, mpp9,
+                  mpp10, mpp11, mpp12, mpp13, mpp14, mpp15, mpp16, mpp17, mpp18, mpp19,
+                  mpp20, mpp21, mpp22, mpp23, mpp24, mpp25, mpp26, mpp27, mpp28, mpp29,
+                  mpp30, mpp31, mpp32, mpp33, mpp34, mpp35, mpp36, mpp37, mpp38, mpp39,
+                  mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ]
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@80020100 {
+      compatible = "marvell,ac5-pinctrl";
+      reg = <0x80020100 0x20>;
+
+      i2c0_pins: i2c0-pins {
+        marvell,pins = "mpp26", "mpp27";
+        marvell,function = "i2c0";
+      };
+
+      i2c0_gpio: i2c0-gpio-pins {
+        marvell,pins = "mpp26", "mpp27";
+        marvell,function = "gpio";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
index 38dc56a57760..ecec514b3155 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -43,19 +43,19 @@ group emmc_nb
 
 group pwm0
  - pin 11 (GPIO1-11)
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm1
  - pin 12
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm2
  - pin 13
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm3
  - pin 14
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pmic1
  - pin 7
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
new file mode 100644
index 000000000000..33b5f79e741a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -0,0 +1,211 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT65xx Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-pinctrl
+      - mediatek,mt2712-pinctrl
+      - mediatek,mt6397-pinctrl
+      - mediatek,mt7623-pinctrl
+      - mediatek,mt8127-pinctrl
+      - mediatek,mt8135-pinctrl
+      - mediatek,mt8167-pinctrl
+      - mediatek,mt8173-pinctrl
+      - mediatek,mt8516-pinctrl
+
+  reg:
+    maxItems: 1
+
+  pins-are-numbered:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Specify the subnodes are using numbered pinmux to specify pins.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  mediatek,pctl-regmap:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    minItems: 1
+    maxItems: 2
+    description: |
+      Should be phandles of the syscfg node.
+
+  interrupt-controller: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - pins-are-numbered
+  - gpio-controller
+  - "#gpio-cells"
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      'pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pinmux:
+            description:
+              integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in <soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up:
+            description: |
+              Besides generic pinconfig options, it can be used as the pull up
+              settings for 2 pull resistors, R0 and R1. User can configure those
+              special pins. Some macros have been defined for this usage, such
+              as MTK_PUPD_SET_R1R0_00. See dt-bindings/pinctrl/mt65xx.h for
+              valid arguments.
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            description: |
+              Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA,
+              etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments.
+
+        required:
+          - pinmux
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt8135-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        syscfg_pctl_a: syscfg-pctl-a@10005000 {
+          compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
+          reg = <0 0x10005000 0 0x1000>;
+        };
+
+        syscfg_pctl_b: syscfg-pctl-b@1020c020 {
+          compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
+          reg = <0 0x1020C020 0 0x1000>;
+        };
+
+        pinctrl@1c20800 {
+          compatible = "mediatek,mt8135-pinctrl";
+          reg = <0 0x1000B000 0 0x1000>;
+          mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
+          pins-are-numbered;
+          gpio-controller;
+          #gpio-cells = <2>;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+              <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+              <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+
+          i2c0_pins_a: i2c0-0 {
+            pins1 {
+              pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
+                <MT8135_PIN_101_SCL0__FUNC_SCL0>;
+              bias-disable;
+            };
+          };
+
+          i2c1_pins_a: i2c1-0 {
+            pins {
+              pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
+                <MT8135_PIN_196_SCL1__FUNC_SCL1>;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+          };
+
+          i2c2_pins_a: i2c2-0 {
+            pins1 {
+              pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
+              bias-pull-down;
+            };
+
+            pins2 {
+              pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
+              bias-pull-up;
+            };
+          };
+
+          i2c3_pins_a: i2c3-0 {
+            pins1 {
+              pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
+                <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+
+            pins2 {
+              pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
+                <MT8135_PIN_36_SDA3__FUNC_SDA3>;
+              output-low;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+
+            pins3 {
+              pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
+                <MT8135_PIN_60_JTDI__FUNC_JTDI>;
+              drive-strength = <32>;
+            };
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
new file mode 100644
index 000000000000..8c79fcef7c52
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6779-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6779 Pin Controller
+
+maintainers:
+  - Andy Teng <andy.teng@mediatek.com>
+
+description: |+
+  The pin controller node should be the child of a syscon node with the
+  required property:
+  - compatible: "syscon"
+
+properties:
+  compatible:
+    const: mediatek,mt6779-pinctrl
+
+  reg:
+    minItems: 9
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: "gpio"
+      - const: "iocfg_rm"
+      - const: "iocfg_br"
+      - const: "iocfg_lm"
+      - const: "iocfg_lb"
+      - const: "iocfg_rt"
+      - const: "iocfg_lt"
+      - const: "iocfg_tl"
+      - const: "eint"
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 5
+    description: |
+      GPIO valid number range.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Specifies the summary IRQ.
+
+  "#interrupt-cells":
+    const: 2
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+  - interrupt-controller
+  - interrupts
+  - "#interrupt-cells"
+
+patternProperties:
+  '-[0-9]*$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '-pins*$':
+        type: object
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input schmitt.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pinmux:
+            description:
+              integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are defined
+              as macros in boot/dts/<soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up setings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pinmux
+
+        additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt6779-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+            compatible = "mediatek,mt6779-pinctrl";
+            reg = <0 0x10005000 0 0x1000>,
+                <0 0x11c20000 0 0x1000>,
+                <0 0x11d10000 0 0x1000>,
+                <0 0x11e20000 0 0x1000>,
+                <0 0x11e70000 0 0x1000>,
+                <0 0x11ea0000 0 0x1000>,
+                <0 0x11f20000 0 0x1000>,
+                <0 0x11f30000 0 0x1000>,
+                <0 0x1000b000 0 0x1000>;
+            reg-names = "gpio", "iocfg_rm",
+              "iocfg_br", "iocfg_lm",
+              "iocfg_lb", "iocfg_rt",
+              "iocfg_lt", "iocfg_tl",
+              "eint";
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pio 0 0 210>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+
+            mmc0_pins_default: mmc0-0 {
+                cmd-dat-pins {
+                    pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>,
+                        <PINMUX_GPIO172__FUNC_MSDC0_DAT1>,
+                        <PINMUX_GPIO169__FUNC_MSDC0_DAT2>,
+                        <PINMUX_GPIO177__FUNC_MSDC0_DAT3>,
+                        <PINMUX_GPIO170__FUNC_MSDC0_DAT4>,
+                        <PINMUX_GPIO173__FUNC_MSDC0_DAT5>,
+                        <PINMUX_GPIO171__FUNC_MSDC0_DAT6>,
+                        <PINMUX_GPIO174__FUNC_MSDC0_DAT7>,
+                        <PINMUX_GPIO167__FUNC_MSDC0_CMD>;
+                    input-enable;
+                    mediatek,pull-up-adv = <1>;
+                };
+                clk-pins {
+                    pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>;
+                    mediatek,pull-down-adv = <2>;
+                };
+                rst-pins {
+                    pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>;
+                    mediatek,pull-up-adv = <0>;
+                };
+            };
+        };
+
+        mmc0 {
+           pinctrl-0 = <&mmc0_pins_default>;
+           pinctrl-names = "default";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
new file mode 100644
index 000000000000..637a8386e23e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6797-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6797 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The MediaTek's MT6797 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt6797-pinctrl
+
+  reg:
+    minItems: 5
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: iocfgl
+      - const: iocfgb
+      - const: iocfgr
+      - const: iocfgt
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      'pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pinmux:
+            description:
+              integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in <soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-enable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 8, 12, 16]
+
+          slew-rate:
+            enum: [0, 1]
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up setings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,tdsel:
+            description: |
+              An integer describing the steps for output level shifter duty
+              cycle when asserted (high pulse width adjustment). Valid arguments
+              are from 0 to 15.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          mediatek,rdsel:
+            description: |
+              An integer describing the steps for input level shifter duty cycle
+              when asserted (high pulse width adjustment). Valid arguments are
+              from 0 to 63.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - pinmux
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt6797-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+            compatible = "mediatek,mt6797-pinctrl";
+            reg = <0 0x10005000 0 0x1000>,
+                  <0 0x10002000 0 0x400>,
+                  <0 0x10002400 0 0x400>,
+                  <0 0x10002800 0 0x400>,
+                  <0 0x10002C00 0 0x400>;
+            reg-names = "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt";
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            uart_pins_a: uart-0 {
+                pins1 {
+                    pinmux = <MT6797_GPIO232__FUNC_URXD1>,
+                            <MT6797_GPIO233__FUNC_UTXD1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
new file mode 100644
index 000000000000..c9ea0cad489b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -0,0 +1,376 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7622 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The MediaTek's MT7622 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-pinctrl
+      - mediatek,mt7629-pinctrl
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: eint
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+if:
+  required:
+    - interrupt-controller
+then:
+  required:
+    - reg-names
+    - interrupts
+    - "#interrupt-cells"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      'mux':
+        type: object
+        additionalProperties: false
+        description: |
+          pinmux configuration nodes.
+        $ref: "/schemas/pinctrl/pinmux-node.yaml"
+        properties:
+          function:
+            description: |
+              A string containing the name of the function to mux to the group.
+            enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd,
+                   spi, tdm, uart, watchdog, wifi]
+
+          groups:
+            description: |
+              An array of strings. Each string contains the name of a group.
+
+          drive-strength:
+            enum: [4, 8, 12, 16]
+
+        required:
+          - groups
+          - function
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: emmc
+            then:
+              properties:
+                groups:
+                  enum: [emmc, emmc_rst]
+          - if:
+              properties:
+                function:
+                  const: eth
+            then:
+              properties:
+                groups:
+                  enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
+                         rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c0, i2c_0, i2c_1, i2c1_0, i2c1_1, i2c1_2, i2c2_0,
+                         i2c2_1, i2c2_2]
+          - if:
+              properties:
+                function:
+                  const: i2s
+            then:
+              properties:
+                groups:
+                  enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
+                         i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
+                         i2s1_out_data, i2s2_out_data, i2s3_out_data,
+                         i2s4_out_data]
+          - if:
+              properties:
+                function:
+                  const: ir
+            then:
+              properties:
+                groups:
+                  enum: [ir_0_tx, ir_1_tx, ir_2_tx, ir_0_rx, ir_1_rx, ir_2_rx]
+          - if:
+              properties:
+                function:
+                  const: led
+            then:
+              properties:
+                groups:
+                  enum: [ephy_leds, ephy0_led, ephy1_led, ephy2_led, ephy3_led,
+                         ephy4_led, wled, wf2g_led, wf5g_led]
+          - if:
+              properties:
+                function:
+                  const: flash
+            then:
+              properties:
+                groups:
+                  enum: [par_nand, snfi, spi_nor]
+          - if:
+              properties:
+                function:
+                  const: pcie
+            then:
+              properties:
+                groups:
+                  enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
+                         pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
+                         pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
+                         pcie_wake, pcie_clkreq]
+          - if:
+              properties:
+                function:
+                  const: pmic
+            then:
+              properties:
+                groups:
+                  enum: [pmic_bus]
+          - if:
+              properties:
+                function:
+                  const: pwm
+            then:
+              properties:
+                groups:
+                  enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
+                         pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
+                         pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
+                         pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
+                         pwm_ch7_0, pwm_0, pwm_1]
+          - if:
+              properties:
+                function:
+                  const: sd
+            then:
+              properties:
+                groups:
+                  enum: [sd_0, sd_1]
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spic0_0, spic0_1, spic1_0, spic1_1, spic2_0_wp_hold,
+                         spic2_0, spi_0, spi_1, spi_wp, spi_hold]
+          - if:
+              properties:
+                function:
+                  const: tdm
+            then:
+              properties:
+                groups:
+                  enum: [tdm_0_out_mclk_bclk_ws, tdm_0_in_mclk_bclk_ws,
+                         tdm_0_out_data, tdm_0_in_data, tdm_1_out_mclk_bclk_ws,
+                         tdm_1_in_mclk_bclk_ws, tdm_1_out_data, tdm_1_in_data]
+          - if:
+              properties:
+                function:
+                  const: uart
+            then:
+              properties:
+                groups:
+                  enum: [uart0_0_tx_rx, uart1_0_tx_rx, uart1_0_rts_cts,
+                         uart1_1_tx_rx, uart1_1_rts_cts, uart2_0_tx_rx,
+                         uart2_0_rts_cts, uart2_1_tx_rx, uart2_1_rts_cts,
+                         uart2_2_tx_rx, uart2_2_rts_cts, uart2_3_tx_rx,
+                         uart3_0_tx_rx, uart3_1_tx_rx, uart3_1_rts_cts,
+                         uart4_0_tx_rx, uart4_1_tx_rx, uart4_1_rts_cts,
+                         uart4_2_tx_rx, uart4_2_rts_cts, uart0_txd_rxd,
+                         uart1_0_txd_rxd, uart1_0_cts_rts, uart1_1_txd_rxd,
+                         uart1_1_cts_rts, uart2_0_txd_rxd, uart2_0_cts_rts,
+                         uart2_1_txd_rxd, uart2_1_cts_rts]
+          - if:
+              properties:
+                function:
+                  const: watchdog
+            then:
+              properties:
+                groups:
+                  enum: [watchdog]
+          - if:
+              properties:
+                function:
+                  const: wifi
+            then:
+              properties:
+                groups:
+                  enum: [wf0_2g, wf0_5g]
+
+      'conf':
+        type: object
+        additionalProperties: false
+        description: |
+          pinconf configuration nodes.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          groups:
+            description: |
+              An array of strings. Each string contains the name of a group.
+              Valid values are the same as the pinmux node.
+
+          pins:
+            description: |
+              An array of strings. Each string contains the name of a pin.
+            enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
+                   RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
+                   I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
+                   I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
+                   G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
+                   G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
+                   NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
+                   MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
+                   MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
+                   MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
+                   MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
+                   PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
+                   GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
+                   PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
+                   AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
+                   PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
+                   WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
+                   WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
+                   EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
+                   EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
+                   WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
+                   UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
+                   UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
+                   PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
+                   GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
+                   TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
+                   WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-enable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [4, 8, 12, 16]
+
+          slew-rate:
+            enum: [0, 1]
+
+          mediatek,tdsel:
+            description: |
+              An integer describing the steps for output level shifter duty
+              cycle when asserted (high pulse width adjustment). Valid arguments
+              are from 0 to 15.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          mediatek,rdsel:
+            description: |
+              An integer describing the steps for input level shifter duty cycle
+              when asserted (high pulse width adjustment). Valid arguments are
+              from 0 to 63.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - pins
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10211000 {
+          compatible = "mediatek,mt7622-pinctrl";
+          reg = <0 0x10211000 0 0x1000>;
+          gpio-controller;
+          #gpio-cells = <2>;
+
+          pinctrl_eth_default: eth-0 {
+            mux-mdio {
+              groups = "mdc_mdio";
+              function = "eth";
+              drive-strength = <12>;
+            };
+
+            mux-gmac2 {
+              groups = "rgmii_via_gmac2";
+              function = "eth";
+              drive-strength = <12>;
+            };
+
+            mux-esw {
+              groups = "esw";
+              function = "eth";
+              drive-strength = <8>;
+            };
+
+            conf-mdio {
+              pins = "MDC";
+              bias-pull-up;
+            };
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
new file mode 100644
index 000000000000..89b8f3dd67a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -0,0 +1,374 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7986 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The MediaTek's MT7986 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7986a-pinctrl
+      - mediatek,mt7986b-pinctrl
+
+  reg:
+    minItems: 8
+    maxItems: 8
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: iocfg_rt
+      - const: iocfg_rb
+      - const: iocfg_lt
+      - const: iocfg_lb
+      - const: iocfg_tr
+      - const: iocfg_tl
+      - const: eint
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 5
+    description: |
+      GPIO valid number range.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '.*mux.*':
+        type: object
+        additionalProperties: false
+        description: |
+          pinmux configuration nodes.
+
+          The following table shows the effective values of "group", "function"
+          properties and chip pinout pins
+
+          groups	    function    pins (in pin#)
+          ---------------------------------------------------------------------
+          "watchdog"        "watchdog"  0
+          "wifi_led"        "led"       1, 2
+          "i2c"             "i2c"       3, 4
+          "uart1_0"         "uart"      7, 8, 9, 10
+          "pcie_clk"        "pcie"      9
+          "pcie_wake"       "pcie"      10
+          "spi1_0"          "spi"       11, 12, 13, 14
+          "pwm1_1"          "pwm"       20,
+          "pwm0"            "pwm"       21,
+          "pwm1_0"          "pwm"       22,
+          "snfi"            "flash"     23, 24, 25, 26, 27, 28
+          "spi1_2"          "spi"       29, 30, 31, 32
+          "emmc_45"         "emmc"      22, 23, 24, 25, 26, 27, 28, 29, 30,
+                                        31, 32
+          "spi1_1"          "spi"       23, 24, 25, 26
+          "uart1_2"         "uart"      29, 30, 31, 32
+          "uart1_1"         "uart"      23, 24, 25, 26
+          "uart2_0"         "uart"      29, 30, 31, 32
+          "spi0"            "spi"       33, 34, 35, 36
+          "spi0_wp_hold"    "spi"       37, 38
+          "uart1_3_rx_tx"   "uart"      35, 36
+          "uart1_3_cts_rts" "uart"      37, 38
+          "uart2_1"         "uart"      33, 34, 35, 36
+          "spi1_3"          "spi"       33, 34, 35, 36
+          "uart0"           "uart"      39, 40
+          "pcie_pereset"    "pcie"      41
+          "uart1"           "uart"      42, 43, 44, 45
+          "uart2"           "uart"      46, 47, 48, 49
+          "emmc_51"         "emmc"      50, 51, 52, 53, 54, 55, 56, 57, 57,
+                                        59, 60, 61
+          "pcm"             "audio"     62, 63, 64, 65
+          "i2s"             "audio"     62, 63, 64, 65
+          "switch_int"      "eth"       66
+          "mdc_mdio"        "eth"       67
+          "wf_2g"           "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83
+          "wf_5g"           "wifi"      91, 92, 93, 94, 95, 96, 97, 98, 99, 100
+          "wf_dbdc"         "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83,
+                                        84, 85
+
+        $ref: "/schemas/pinctrl/pinmux-node.yaml"
+        properties:
+          function:
+            description: |
+              A string containing the name of the function to mux to the group.
+              There is no "audio", "pcie" functions on mt7986b, you can only use
+              those functions on mt7986a.
+            enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart,
+                   watchdog, wifi]
+          groups:
+            description: |
+              An array of strings. Each string contains the name of a group.
+              There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm",
+              and "i2s" groups on mt7986b, you can only use those groups on
+              mt7986a.
+        required:
+          - function
+          - groups
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: audio
+            then:
+              properties:
+                groups:
+                  enum: [pcm, i2s]
+          - if:
+              properties:
+                function:
+                  const: emmc
+            then:
+              properties:
+                groups:
+                  enum: [emmc, emmc_rst]
+          - if:
+              properties:
+                function:
+                  const: eth
+            then:
+              properties:
+                groups:
+                  enum: [switch_int, mdc_mdio]
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+          - if:
+              properties:
+                function:
+                  const: led
+            then:
+              properties:
+                groups:
+                  enum: [wifi_led]
+          - if:
+              properties:
+                function:
+                  const: flash
+            then:
+              properties:
+                groups:
+                  enum: [snfi]
+          - if:
+              properties:
+                function:
+                  const: pcie
+            then:
+              properties:
+                groups:
+                  enum: [pcie_clk, pcie_wake, pcie_pereset]
+          - if:
+              properties:
+                function:
+                  const: pwm
+            then:
+              properties:
+                groups:
+                  enum: [pwm0, pwm1_0, pwm1_1]
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3]
+          - if:
+              properties:
+                function:
+                  const: uart
+            then:
+              properties:
+                groups:
+                  enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx,
+                         uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2]
+          - if:
+              properties:
+                function:
+                  const: watchdog
+            then:
+              properties:
+                groups:
+                  enum: [watchdog]
+          - if:
+              properties:
+                function:
+                  const: wifi
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [wf_2g, wf_5g, wf_dbdc]
+                  maxItems: 3
+      '.*conf.*':
+        type: object
+        additionalProperties: false
+        description: |
+          pinconf configuration nodes.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pins:
+            description: |
+              An array of strings. Each string contains the name of a pin.
+              There is no PIN 41 to PIN 65 above on mt7686b, you can only use
+              those pins on mt7986a.
+            items:
+              enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
+                     GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
+                     GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
+                     GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
+                     SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
+                     SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
+                     UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
+                     UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
+                     UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
+                     EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
+                     EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
+                     PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
+                     WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
+                     WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
+                     WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
+                     WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
+                     WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
+                     WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
+                     WF1_HB8]
+            maxItems: 101
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-enable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          mediatek,pull-up-adv:
+            description: |
+              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+              Pull up setings for 2 pull resistors, R0 and R1. Valid arguments
+              are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+              Pull down setings for 2 pull resistors, R0 and R1. Valid arguments
+              are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pins
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      pio: pinctrl@1001f000 {
+        compatible = "mediatek,mt7986a-pinctrl";
+        reg = <0 0x1001f000 0 0x1000>,
+              <0 0x11c30000 0 0x1000>,
+              <0 0x11c40000 0 0x1000>,
+              <0 0x11e20000 0 0x1000>,
+              <0 0x11e30000 0 0x1000>,
+              <0 0x11f00000 0 0x1000>,
+              <0 0x11f10000 0 0x1000>,
+              <0 0x1000b000 0 0x1000>;
+        reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+                    "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 100>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&gic>;
+        #interrupt-cells = <2>;
+
+        uart1_pins: uart1-pins {
+          mux {
+            function = "uart";
+            groups = "uart1";
+          };
+        };
+
+        uart2_pins: uart2-pins {
+          mux {
+            function = "uart";
+            groups = "uart2";
+          };
+        };
+
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
new file mode 100644
index 000000000000..0d2484056a0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
@@ -0,0 +1,231 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8183-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8183 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The MediaTek's MT8183 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8183-pinctrl
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: iocfg0
+      - const: iocfg1
+      - const: iocfg2
+      - const: iocfg3
+      - const: iocfg4
+      - const: iocfg5
+      - const: iocfg6
+      - const: iocfg7
+      - const: iocfg8
+      - const: eint
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 5
+    description: |
+      GPIO valid number range.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      'pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pinmux:
+            description:
+              integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in <soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          mediatek,drive-strength-adv:
+            description: |
+              Describe the specific driving setup property.
+              For I2C pins, the existing generic driving setup can only support
+              2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
+              can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
+              driving setup, the existing generic setup will be disabled.
+              The specific driving setup is controlled by E1E0EN.
+              When E1=0/E0=0, the strength is 0.125mA.
+              When E1=0/E0=1, the strength is 0.25mA.
+              When E1=1/E0=0, the strength is 0.5mA.
+              When E1=1/E0=1, the strength is 1mA.
+              EN is used to enable or disable the specific driving setup.
+              Valid arguments are described as below:
+              0: (E1, E0, EN) = (0, 0, 0)
+              1: (E1, E0, EN) = (0, 0, 1)
+              2: (E1, E0, EN) = (0, 1, 0)
+              3: (E1, E0, EN) = (0, 1, 1)
+              4: (E1, E0, EN) = (1, 0, 0)
+              5: (E1, E0, EN) = (1, 0, 1)
+              6: (E1, E0, EN) = (1, 1, 0)
+              7: (E1, E0, EN) = (1, 1, 1)
+              So the valid arguments are from 0 to 7.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up setings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,tdsel:
+            description: |
+              An integer describing the steps for output level shifter duty
+              cycle when asserted (high pulse width adjustment). Valid arguments
+              are from 0 to 15.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          mediatek,rdsel:
+            description: |
+              An integer describing the steps for input level shifter duty cycle
+              when asserted (high pulse width adjustment). Valid arguments are
+              from 0 to 63.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - pinmux
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt8183-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+          compatible = "mediatek,mt8183-pinctrl";
+          reg = <0 0x10005000 0 0x1000>,
+                <0 0x11f20000 0 0x1000>,
+                <0 0x11e80000 0 0x1000>,
+                <0 0x11e70000 0 0x1000>,
+                <0 0x11e90000 0 0x1000>,
+                <0 0x11d30000 0 0x1000>,
+                <0 0x11d20000 0 0x1000>,
+                <0 0x11c50000 0 0x1000>,
+                <0 0x11f30000 0 0x1000>,
+                <0 0x1000b000 0 0x1000>;
+          reg-names = "iocfg0", "iocfg1", "iocfg2",
+                "iocfg3", "iocfg4", "iocfg5",
+                "iocfg6", "iocfg7", "iocfg8",
+                "eint";
+          gpio-controller;
+          #gpio-cells = <2>;
+          gpio-ranges = <&pio 0 0 192>;
+          interrupt-controller;
+          interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+          #interrupt-cells = <2>;
+
+          i2c0_pins_a: i2c-0 {
+            pins1 {
+              pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+                <PINMUX_GPIO49__FUNC_SDA5>;
+              mediatek,pull-up-adv = <3>;
+              mediatek,drive-strength-adv = <7>;
+            };
+          };
+
+          i2c1_pins_a: i2c-1 {
+            pins {
+              pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+                <PINMUX_GPIO51__FUNC_SDA3>;
+              mediatek,pull-down-adv = <2>;
+              mediatek,drive-strength-adv = <4>;
+            };
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
new file mode 100644
index 000000000000..7e750f1e643d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8188-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8188 Pin Controller
+
+maintainers:
+  - Hui Liu <hui.liu@mediatek.com>
+
+description: |
+  The MediaTek's MT8188 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8188-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: |
+      Number of cells in GPIO specifier, should be two. The first cell
+      is the pin number, the second cell is used to specify optional
+      parameters which are defined in <dt-bindings/gpio/gpio.h>.
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names: true
+
+  reg:
+    items:
+      - description: gpio registers base address
+      - description: rm group io configuration registers base address
+      - description: lt group io configuration registers base address
+      - description: lm group io configuration registers base address
+      - description: rt group io configuration registers base address
+      - description: eint registers base address
+
+  reg-names:
+    items:
+      - const: iocfg0
+      - const: iocfg_rm
+      - const: iocfg_lt
+      - const: iocfg_lm
+      - const: iocfg_rt
+      - const: eint
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+  mediatek,rsel-resistance-in-si-unit:
+    type: boolean
+    description: |
+      We provide two methods to select the resistance for I2C when pull up or pull down.
+      The first is by RSEL definition value, another one is by resistance value(ohm).
+      This flag is used to identify if the method is resistance(si unit) value.
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^pins':
+        type: object
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and
+          input schmitt.
+
+        properties:
+          pinmux:
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/mediatek,<soc>-pinfunc.h
+              directly.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8188 pull down PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8188 pull down RSEL type define value.
+              - enum: [75000, 5000]
+                description: mt8188 pull down RSEL type si unit value(ohm).
+            description: |
+              For pull down type is normal, it doesn't need add RSEL & R1R0 define
+              and resistance value.
+              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
+              define in mt8188.
+              For pull down type is RSEL, it can add RSEL define & resistance value(ohm)
+              to set different resistance by identifying property "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
+              & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+              define in mt8188. It can also support resistance value(ohm) "75000" & "5000" in mt8188.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8188 pull up PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8188 pull up RSEL type define value.
+              - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
+                description: mt8188 pull up RSEL type si unit value(ohm).
+            description: |
+              For pull up type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
+              define in mt8188.
+              For pull up type is RSEL, it can add RSEL define & resistance value(ohm)
+              to set different resistance by identifying property "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
+              & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+              define in mt8188. It can also support resistance value(ohm)
+              "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8188.
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pio: pinctrl@10005000 {
+        compatible = "mediatek,mt8188-pinctrl";
+        reg = <0x10005000 0x1000>,
+              <0x11c00000 0x1000>,
+              <0x11e10000 0x1000>,
+              <0x11e20000 0x1000>,
+              <0x11ea0000 0x1000>,
+              <0x1000b000 0x1000>;
+        reg-names = "iocfg0", "iocfg_rm",
+                    "iocfg_lt", "iocfg_lm", "iocfg_rt",
+                    "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 176>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
+        #interrupt-cells = <2>;
+
+        pio-pins {
+            pins {
+                pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>;
+                output-low;
+            };
+        };
+
+        spi0-pins {
+            pins-spi {
+                pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+                         <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+                         <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>;
+                drive-strength = <6>;
+            };
+            pins-spi-mi {
+                pinmux = <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+                bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+            };
+        };
+
+        i2c0-pins {
+            pins {
+                pinmux = <PINMUX_GPIO55__FUNC_B1_SCL0>,
+                         <PINMUX_GPIO56__FUNC_B1_SDA0>;
+                bias-disable;
+                drive-strength-microamp = <1000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
new file mode 100644
index 000000000000..73ae6e11410b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
@@ -0,0 +1,224 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,pinctrl-mt6795.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6795 Pin Controller
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |
+  The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt6795-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    description: GPIO valid number range.
+    maxItems: 1
+
+  reg:
+    description:
+      Physical address base for gpio base and eint registers.
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: base
+      - const: eint
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and
+          input schmitt.
+          An example of using macro:
+          pincontroller {
+            /* GPIO0 set as multifunction GPIO0 */
+            gpio-pins {
+              pins {
+                pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+              }
+            };
+            /* GPIO45 set as multifunction SDA0 */
+            i2c0-pins {
+              pins {
+                pinmux = <PINMUX_GPIO45__FUNC_SDA0>;
+              }
+            };
+          };
+        $ref: "pinmux-node.yaml"
+
+        properties:
+          pinmux:
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
+              directly.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt6795 pull down PUPD/R0/R1 type define value.
+            description: |
+               For normal pull down type, it is not necessary to specify R1R0
+               values; When pull down type is PUPD/R0/R1, adding R1R0 defines
+               will set different resistance values.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt6795 pull up PUPD/R0/R1 type define value.
+            description: |
+               For normal pull up type, it is not necessary to specify R1R0
+               values; When pull up type is PUPD/R0/R1, adding R1R0 defines
+               will set different resistance values.
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up setings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pinmux
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/mt6795-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+            compatible = "mediatek,mt6795-pinctrl";
+            reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
+            reg-names = "base", "eint";
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pio 0 0 196>;
+            interrupt-controller;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+
+            i2c0-pins {
+                pins-sda-scl {
+                    pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
+                             <PINMUX_GPIO46__FUNC_SCL0>;
+                };
+            };
+
+            mmc0-pins {
+                pins-cmd-dat {
+                    pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
+                             <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
+                             <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
+                             <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
+                             <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
+                             <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
+                             <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
+                             <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
+                             <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
+                    input-enable;
+                    bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+                };
+
+                pins-clk {
+                    pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
+                    bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+                };
+
+                pins-rst {
+                    pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
+                    bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index 0aff1f28495c..8146193bd8ac 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -16,6 +16,7 @@ Required properties for the root node:
 		      "amlogic,meson-g12a-periphs-pinctrl"
 		      "amlogic,meson-g12a-aobus-pinctrl"
 		      "amlogic,meson-a1-periphs-pinctrl"
+		      "amlogic,meson-s4-periphs-pinctrl"
  - reg: address and size of registers controlling irq functionality
 
 === GPIO sub-nodes ===
diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
new file mode 100644
index 000000000000..0df4e114fdd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/microchip,sparx5-sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi/Microchip Serial GPIO controller
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  By using a serial interface, the SIO controller significantly extend
+  the number of available GPIOs with a minimum number of additional
+  pins on the device. The primary purpose of the SIO controllers is to
+  connect control signals from SFP modules and to act as an LED
+  controller.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - microchip,sparx5-sgpio
+      - mscc,ocelot-sgpio
+      - mscc,luton-sgpio
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  microchip,sgpio-port-ranges:
+    description: This is a sequence of tuples, defining intervals of
+      enabled ports in the serial input stream. The enabled ports must
+      match the hardware configuration in order for signals to be
+      properly written/read to/from the controller holding
+      registers. Being tuples, then number of arguments must be
+      even. The tuples mast be ordered (low, high) and are
+      inclusive.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: |
+            "low" indicates start bit number of range
+          minimum: 0
+          maximum: 31
+        - description: |
+            "high" indicates end bit number of range
+          minimum: 0
+          maximum: 31
+    minItems: 1
+    maxItems: 32
+
+  bus-frequency:
+    description: The sgpio controller frequency (Hz). This dictates
+      the serial bitstream speed, which again affects the latency in
+      getting control signals back and forth between external shift
+      registers. The speed must be no larger than half the system
+      clock, and larger than zero.
+    default: 12500000
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: switch
+
+patternProperties:
+  "^gpio@[0-1]$":
+    type: object
+    properties:
+      compatible:
+        const: microchip,sparx5-sgpio-bank
+
+      reg:
+        description: |
+          The GPIO bank number. "0" is designates the input pin bank,
+          "1" the output bank.
+        maxItems: 1
+
+      gpio-controller: true
+
+      '#gpio-cells':
+        description: |
+         Specifies the pin (port and bit) and flags. Note that the
+         SGIO pin is defined by *2* numbers, a port number between 0
+         and 31, and a bit index, 0 to 3. The maximum bit number is
+         controlled indirectly by the "ngpios" property: (ngpios/32).
+        const: 3
+
+      interrupts:
+        description: Specifies the sgpio IRQ (in parent controller)
+        maxItems: 1
+
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        description:
+          Specifies the pin (port and bit) and flags, as defined in
+          defined in include/dt-bindings/interrupt-controller/irq.h
+        const: 3
+
+      ngpios:
+        description: The numbers of GPIO's exposed. This must be a
+          multiple of 32.
+        minimum: 32
+        maximum: 128
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - '#gpio-cells'
+      - ngpios
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - microchip,sgpio-port-ranges
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    sgpio2: gpio@1101059c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "microchip,sparx5-sgpio";
+      clocks = <&sys_clk>;
+      pinctrl-0 = <&sgpio2_pins>;
+      pinctrl-names = "default";
+      reg = <0x1101059c 0x118>;
+      microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
+      bus-frequency = <25000000>;
+      sgpio_in2: gpio@0 {
+        reg = <0>;
+        compatible = "microchip,sparx5-sgpio-bank";
+        gpio-controller;
+        #gpio-cells = <3>;
+        ngpios = <96>;
+        interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+      };
+      sgpio_out2: gpio@1 {
+        compatible = "microchip,sparx5-sgpio-bank";
+        reg = <1>;
+        gpio-controller;
+        #gpio-cells = <3>;
+        ngpios = <96>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
deleted file mode 100644
index 32a8a8fa7805..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Microsemi Ocelot pin controller Device Tree Bindings
-----------------------------------------------------
-
-Required properties:
- - compatible		: Should be "mscc,ocelot-pinctrl" or
-				"mscc,jaguar2-pinctrl"
- - reg			: Address and length of the register set for the device
- - gpio-controller	: Indicates this device is a GPIO controller
- - #gpio-cells		: Must be 2.
-			  The first cell is the pin number and the
-			  second cell specifies GPIO flags, as defined in
-			  <dt-bindings/gpio/gpio.h>.
- - gpio-ranges		: Range of pins managed by the GPIO controller.
-
-
-The ocelot-pinctrl driver uses the generic pin multiplexing and generic pin
-configuration documented in pinctrl-bindings.txt.
-
-The following generic properties are supported:
- - function
- - pins
-
-Example:
-	gpio: pinctrl@71070034 {
-		compatible = "mscc,ocelot-pinctrl";
-		reg = <0x71070034 0x28>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&gpio 0 0 22>;
-
-		uart_pins: uart-pins {
-				pins = "GPIO_6", "GPIO_7";
-				function = "uart";
-		};
-
-		uart2_pins: uart2-pins {
-				pins = "GPIO_12", "GPIO_13";
-				function = "uart2";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
new file mode 100644
index 000000000000..98d547c34ef3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mscc,ocelot-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi Ocelot pin controller
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,lan966x-pinctrl
+      - microchip,sparx5-pinctrl
+      - mscc,jaguar2-pinctrl
+      - mscc,luton-pinctrl
+      - mscc,ocelot-pinctrl
+      - mscc,serval-pinctrl
+      - mscc,servalt-pinctrl
+
+  reg:
+    items:
+      - description: Base address
+      - description: Extended pin configuration registers
+    minItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    description: Optional shared switch reset.
+    items:
+      - const: switch
+
+patternProperties:
+  '-pins$':
+    type: object
+    allOf:
+      - $ref: "pinmux-node.yaml"
+      - $ref: "pincfg-node.yaml"
+
+    properties:
+      function: true
+      pins: true
+      output-high: true
+      output-low: true
+      drive-strength: true
+
+    required:
+      - function
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,lan966x-pinctrl
+              - microchip,sparx5-pinctrl
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio: pinctrl@71070034 {
+        compatible = "mscc,ocelot-pinctrl";
+        reg = <0x71070034 0x28>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&gpio 0 0 22>;
+
+        uart_pins: uart-pins {
+            pins = "GPIO_6", "GPIO_7";
+            function = "uart";
+        };
+
+        uart2_pins: uart2-pins {
+            pins = "GPIO_12", "GPIO_13";
+            function = "uart2";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
new file mode 100644
index 000000000000..7b7f840ffc4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nuvoton,wpcm450-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 pin control and GPIO
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+
+properties:
+  compatible:
+    const: nuvoton,wpcm450-pinctrl
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  # There are three kinds of subnodes:
+  # 1. a GPIO controller node for each GPIO bank
+  # 2. a pinmux node configures pin muxing for a group of pins (e.g. rmii2)
+  # 3. a pinconf node configures properties of a single pin
+
+  "^gpio@[0-7]$":
+    type: object
+    additionalProperties: false
+
+    description:
+      Eight GPIO banks (gpio@0 to gpio@7), that each contain between 14 and 18
+      GPIOs. Some GPIOs support interrupts.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+
+      interrupt-controller: true
+
+      "#interrupt-cells":
+        const: 2
+
+      interrupts:
+        maxItems: 3
+        description:
+          The interrupts associated with this GPIO bank
+
+    required:
+      - reg
+      - gpio-controller
+      - '#gpio-cells'
+
+  "^mux-":
+    $ref: pinmux-node.yaml#
+
+    properties:
+      groups:
+        description:
+          One or more groups of pins to mux to a certain function
+        items:
+          enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+                  hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo,
+                  clko, smi, uinc, gspi, mben, xcs2, xcs1, sdio, sspi, fi0,
+                  fi1, fi2, fi3, fi4, fi5, fi6, fi7, fi8, fi9, fi10, fi11,
+                  fi12, fi13, fi14, fi15, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+                  pwm6, pwm7, hg0, hg1, hg2, hg3, hg4, hg5, hg6, hg7 ]
+      function:
+        description:
+          The function that a group of pins is muxed to
+        enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+                hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo0,
+                dvo1, dvo2, dvo3, dvo4, dvo5, dvo6, dvo7, clko, smi, uinc,
+                gspi, mben, xcs2, xcs1, sdio, sspi, fi0, fi1, fi2, fi3, fi4,
+                fi5, fi6, fi7, fi8, fi9, fi10, fi11, fi12, fi13, fi14, fi15,
+                pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, hg0, hg1,
+                hg2, hg3, hg4, hg5, hg6, hg7, gpio ]
+
+    dependencies:
+      groups: [ function ]
+      function: [ groups ]
+
+    additionalProperties: false
+
+  "^cfg-":
+    $ref: pincfg-node.yaml#
+
+    properties:
+      pins:
+        description:
+          A list of pins to configure in certain ways, such as enabling
+          debouncing
+        items:
+          pattern: "^gpio1?[0-9]{1,2}$"
+
+      input-debounce: true
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    pinctrl: pinctrl@b8003000 {
+      compatible = "nuvoton,wpcm450-pinctrl";
+      reg = <0xb8003000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      gpio0: gpio@0 {
+        reg = <0>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+                     <3 IRQ_TYPE_LEVEL_HIGH>,
+                     <4 IRQ_TYPE_LEVEL_HIGH>;
+      };
+
+      mux-rmii2 {
+        groups = "rmii2";
+        function = "rmii2";
+      };
+
+      pinmux_uid: mux-uid {
+        groups = "gspi", "sspi";
+        function = "gpio";
+      };
+
+      pinctrl_uid: cfg-uid {
+        pins = "gpio14";
+        input-debounce = <1>;
+      };
+    };
+
+    gpio-keys {
+      compatible = "gpio-keys";
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_uid>, <&pinmux_uid>;
+
+      button-uid {
+        label = "UID";
+        linux,code = <102>;
+        gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt
deleted file mode 100644
index e0e886b73527..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Device tree binding for NVIDIA Tegra DPAUX pad controller
-========================================================
-
-The Tegra Display Port Auxiliary (DPAUX) pad controller manages two pins
-which can be assigned to either the DPAUX channel or to an I2C
-controller.
-
-This document defines the device-specific binding for the DPAUX pad
-controller. Refer to pinctrl-bindings.txt in this directory for generic
-information about pin controller device tree bindings. Please refer to
-the binding document ../display/tegra/nvidia,tegra20-host1x.txt for more
-details on the DPAUX binding.
-
-Pin muxing:
------------
-
-Child nodes contain the pinmux configurations following the conventions
-from the pinctrl-bindings.txt document.
-
-Since only three configurations are possible, only three child nodes are
-needed to describe the pin mux'ing options for the DPAUX pads.
-Furthermore, given that the pad functions are only applicable to a
-single set of pads, the child nodes only need to describe the pad group
-the functions are being applied to rather than the individual pads.
-
-Required properties:
-- groups: Must be "dpaux-io"
-- function: Must be either "aux", "i2c" or "off".
-
-Example:
---------
-
-	dpaux@545c0000 {
-		...
-
-		state_dpaux_aux: pinmux-aux {
-			groups = "dpaux-io";
-			function = "aux";
-		};
-
-		state_dpaux_i2c: pinmux-i2c {
-			groups = "dpaux-io";
-			function = "i2c";
-		};
-
-		state_dpaux_off: pinmux-off {
-			groups = "dpaux-io";
-			function = "off";
-		};
-	};
-
-	...
-
-	i2c@7000d100 {
-		...
-		pinctrl-0 = <&state_dpaux_i2c>;
-		pinctrl-1 = <&state_dpaux_off>;
-		pinctrl-names = "default", "idle";
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt
index 8763f448c376..90d38f710635 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt
@@ -99,7 +99,7 @@ Example:
 					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
 					nvidia,lpdr = <TEGRA_PIN_ENABLE>;
 					nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-					nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>;
+					nvidia,io-hv = <TEGRA_PIN_ENABLE>;
 					nvidia,tristate = <TEGRA_PIN_DISABLE>;
 					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				};
diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
index 13b7ab9dd6d5..f5a121311f61 100644
--- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
@@ -52,11 +52,19 @@ properties:
       hardware supporting it the pull strength in Ohm.
 
   drive-push-pull:
-    type: boolean
+    oneOf:
+      - type: boolean
+      - $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1 ]
+        deprecated: true
     description: drive actively high and low
 
   drive-open-drain:
-    type: boolean
+    oneOf:
+      - type: boolean
+      - $ref: /schemas/types.yaml#/definitions/uint32
+        const: 1    # No known cases of 0
+        deprecated: true
     description: drive with open drain
 
   drive-open-source:
@@ -114,6 +122,9 @@ properties:
     description: enable output on a pin without actively driving it
       (such as enabling an output buffer)
 
+  output-impedance-ohms:
+    description: set the output impedance of a pin to at most X ohms
+
   output-low:
     type: boolean
     description: set the pin to output mode with low level
@@ -138,3 +149,5 @@ properties:
       and the delay before latching a value to an output
       pin. Typically indicates how many double-inverters are
       used to delay the signal.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt
deleted file mode 100644
index bf9b07016c87..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt
+++ /dev/null
@@ -1,109 +0,0 @@
-CSR SiRFatlas7 pinmux controller
-
-Required properties:
-- compatible	: "sirf,atlas7-ioc"
-- reg		: Address range of the pinctrl registers
-
-For example, pinctrl might have properties like the following:
-	pinctrl: ioc@18880000 {
-			compatible = "sirf,atlas7-ioc";
-			reg = <0x18880000 0x1000>;
-
-			a_ac97_pmx: ac97@0 {
-				ac97 {
-					groups = "audio_ac97_grp";
-					function = "audio_ac97";
-				};
-			};
-
-			...
-
-			sd2_pmx: sd2@0 {
-				sd2 {
-					groups = "sd2_grp0";
-					function = "sd2";
-				};
-			};
-
-			...
-
-
-			sample0_cfg: sample0@0 {
-				sample0 {
-					pins = "ldd_0", "ldd_1";
-					bias-pull-up;
-				};
-			};
-
-			sample1_cfg: sample1@0 {
-				sample1 {
-					pins = "ldd_2", "ldd_3";
-					input-schmitt-enable;
-				};
-			};
-
-			sample2_cfg: sample2@0 {
-				sample2 {
-					groups = "uart4_nopause_grp";
-					bias-pull-down;
-				};
-			};
-
-			sample3_cfg: sample3@0 {
-				sample3 {
-					pins = "ldd_4", "ldd_5";
-					drive-strength = <2>;
-				};
-			};
-	};
-
-Please refer to pinctrl-bindings.txt in this directory for details of the common
-pinctrl bindings used by client devices.
-
-SiRFatlas7's pinmux nodes act as a container for an abitrary number of subnodes.
-Each of these subnodes represents some desired configuration for a group of pins.
-
-Required subnode-properties:
-- groups : An array of strings. Each string contains the name of a group.
-- function: A string containing the name of the function to mux to the
-  group.
-
-  Valid values for group and function names can be found from looking at the
-  group and function arrays in driver files:
-  drivers/pinctrl/pinctrl-sirf.c
-
-For example, pinctrl might have subnodes like the following:
-	sd0_pmx: sd0@0 {
-		sd0 {
-			groups = "sd0_grp";
-			function = "sd0";
-		};
-	};
-
-	sd1_pmx0: sd1@0 {
-		sd1 {
-			groups = "sd1_grp0";
-			function = "sd1_m0";
-		};
-	};
-
-	sd1_pmx1: sd1@1 {
-		sd1 {
-			groups = "sd1_grp1";
-			function = "sd1_m1";
-		};
-	};
-
-For a specific board, if it wants to use sd1,
-it can add the following to its board-specific .dts file.
-sd1: sd@12340000 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_pmx0>;
-}
-
-or
-
-sd1: sd@12340000 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_pmx1>;
-}
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index 4613bb17ace3..6904072d3944 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -77,13 +77,13 @@ For example:
 	device {
 		pinctrl-names = "active", "idle";
 		pinctrl-0 = <&state_0_node_a>;
-		pinctrl-1 = <&state_1_node_a &state_1_node_b>;
+		pinctrl-1 = <&state_1_node_a>, <&state_1_node_b>;
 	};
 
 	/* For the same device if using state IDs */
 	device {
 		pinctrl-0 = <&state_0_node_a>;
-		pinctrl-1 = <&state_1_node_a &state_1_node_b>;
+		pinctrl-1 = <&state_1_node_a>, <&state_1_node_b>;
 	};
 
 	/*
@@ -97,47 +97,8 @@ For example:
 	};
 
 == Pin controller devices ==
-Required properties: See the pin controller driver specific documentation
 
-Optional properties:
-#pinctrl-cells:	Number of pin control cells in addition to the index within the
-		pin controller device instance
-
-pinctrl-use-default: Boolean. Indicates that the OS can use the boot default
-		pin configuration. This allows using an OS that does not have a
-		driver for the pin controller. This property can be set either
-		globally for the pin controller or in child nodes for individual
-		pin group control.
-
-Pin controller devices should contain the pin configuration nodes that client
-devices reference.
-
-For example:
-
-	pincontroller {
-		... /* Standard DT properties for the device itself elided */
-
-		state_0_node_a {
-			...
-		};
-		state_1_node_a {
-			...
-		};
-		state_1_node_b {
-			...
-		};
-	}
-
-The contents of each of those pin configuration child nodes is defined
-entirely by the binding for the individual pin controller device. There
-exists no common standard for this content. The pinctrl framework only
-provides generic helper bindings that the pin controller driver can use.
-
-The pin configuration nodes need not be direct children of the pin controller
-device; they may be grandchildren, for example. Whether this is legal, and
-whether there is any interaction between the child and intermediate parent
-nodes, is again defined entirely by the binding for the individual pin
-controller device.
+See pinctrl.yaml
 
 == Generic pin multiplexing node content ==
 
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
index 8b94aa8f5971..2fa5edac7a35 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -49,6 +49,7 @@ Optional properties:
 - interrupt-controller: Marks the device node as a interrupt controller.
 - drive-open-drain: Sets the ODR flag in the IOCON register. This configures
         the IRQ output as open drain active low.
+- reset-gpios: Corresponds to the active-low RESET# pin for the chip
 
 Optional device specific properties:
 - microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices
@@ -134,7 +135,8 @@ gpio21: gpio@21 {
 	#interrupt-cells = <0x2>;
 	microchip,irq-mirror;
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2cgpio0irq &gpio21pullups>;
+	pinctrl-0 = <&i2cgpio0irq>, <&gpio21pullups>;
+	reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
 
 	gpio21pullups: pinmux {
 		pins =	"gpio0", "gpio1", "gpio2", "gpio3",
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
deleted file mode 100644
index 205be98ae078..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
+++ /dev/null
@@ -1,154 +0,0 @@
-* Mediatek MT65XX Pin Controller
-
-The Mediatek's Pin controller is used to control SoC pins.
-
-Required properties:
-- compatible: value should be one of the following.
-	"mediatek,mt2701-pinctrl", compatible with mt2701 pinctrl.
-	"mediatek,mt2712-pinctrl", compatible with mt2712 pinctrl.
-	"mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl.
-	"mediatek,mt7623-pinctrl", compatible with mt7623 pinctrl.
-	"mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
-	"mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
-	"mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
-	"mediatek,mt8516-pinctrl", compatible with mt8516 pinctrl.
-- pins-are-numbered: Specify the subnodes are using numbered pinmux to
-  specify pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
-  binding is used, the amount of cells must be specified as 2. See the below
-  mentioned gpio binding representation for description of particular cells.
-
-	Eg: <&pio 6 0>
-	<[phandle of the gpio controller node]
-	[line number within the gpio controller]
-	[flags]>
-
-	Values for gpio specifier:
-	- Line number: is a value between 0 to 202.
-	- Flags:  bit field of flags, as defined in <dt-bindings/gpio/gpio.h>.
-            Only the following flags are supported:
-            0 - GPIO_ACTIVE_HIGH
-            1 - GPIO_ACTIVE_LOW
-
-Optional properties:
-- mediatek,pctl-regmap: Should be a phandle of the syscfg node.
-- reg: physicall address base for EINT registers
-- interrupt-controller: Marks the device node as an interrupt controller
-- #interrupt-cells: Should be two.
-- interrupts : The interrupt outputs from the controller.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices.
-
-Subnode format
-A pinctrl node should contain at least one subnodes representing the
-pinctrl groups available on the machine. Each subnode will list the
-pins it needs, and how they should be configured, with regard to muxer
-configuration, pullups, drive strength, input enable/disable and input schmitt.
-
-    node {
-	pinmux = <PIN_NUMBER_PINMUX>;
-	GENERIC_PINCONFIG;
-    };
-
-Required properties:
-- pinmux: integer array, represents gpio pin number and mux setting.
-    Supported pin number and mux varies for different SoCs, and are defined
-    as macros in boot/dts/<soc>-pinfunc.h directly.
-
-Optional properties:
-- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
-    bias-pull-down, bias-pull-up, input-enable, input-disable, output-low, output-high,
-    input-schmitt-enable, input-schmitt-disable and drive-strength are valid.
-
-    Some special pins have extra pull up strength, there are R0 and R1 pull-up
-    resistors available, but for user, it's only need to set R1R0 as 00, 01, 10 or 11.
-    So when config bias-pull-up, it support arguments for those special pins.
-    Some macros have been defined for this usage, such as MTK_PUPD_SET_R1R0_00.
-    See dt-bindings/pinctrl/mt65xx.h.
-
-    When config drive-strength, it can support some arguments, such as
-    MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h.
-
-Examples:
-
-#include "mt8135-pinfunc.h"
-
-...
-{
-	syscfg_pctl_a: syscfg-pctl-a@10005000 {
-		compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
-		reg = <0 0x10005000 0 0x1000>;
-	};
-
-	syscfg_pctl_b: syscfg-pctl-b@1020c020 {
-		compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
-		reg = <0 0x1020C020 0 0x1000>;
-	};
-
-	pinctrl@1c20800 {
-		compatible = "mediatek,mt8135-pinctrl";
-		reg = <0 0x1000B000 0 0x1000>;
-		mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
-		pins-are-numbered;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-
-		i2c0_pins_a: i2c0@0 {
-			pins1 {
-				pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
-					 <MT8135_PIN_101_SCL0__FUNC_SCL0>;
-				bias-disable;
-			};
-		};
-
-		i2c1_pins_a: i2c1@0 {
-			pins {
-				pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
-					 <MT8135_PIN_196_SCL1__FUNC_SCL1>;
-				bias-pull-up = <55>;
-			};
-		};
-
-		i2c2_pins_a: i2c2@0 {
-			pins1 {
-				pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
-				bias-pull-down;
-			};
-
-			pins2 {
-				pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
-				bias-pull-up;
-			};
-		};
-
-		i2c3_pins_a: i2c3@0 {
-			pins1 {
-				pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
-					 <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
-				bias-pull-up = <55>;
-			};
-
-			pins2 {
-				pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
-					 <MT8135_PIN_36_SDA3__FUNC_SDA3>;
-				output-low;
-				bias-pull-up = <55>;
-			};
-
-			pins3 {
-				pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
-					 <MT8135_PIN_60_JTDI__FUNC_JTDI>;
-				drive-strength = <32>;
-			};
-		};
-
-		...
-	}
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt
deleted file mode 100644
index bd83401e6179..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-* MediaTek MT6797 Pin Controller
-
-The MediaTek's MT6797 Pin controller is used to control SoC pins.
-
-Required properties:
-- compatible: Value should be one of the following.
-              "mediatek,mt6797-pinctrl", compatible with mt6797 pinctrl.
-- reg:        Should contain address and size for gpio, iocfgl, iocfgb,
-              iocfgr and iocfgt register bases.
-- reg-names:  An array of strings describing the "reg" entries. Must
-              contain "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt".
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be two. The first cell is the gpio pin number
-               and the second cell is used for optional parameters.
-
-Optional properties:
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- interrupts : The interrupt outputs from the controller.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices.
-
-Subnode format
-A pinctrl node should contain at least one subnodes representing the
-pinctrl groups available on the machine. Each subnode will list the
-pins it needs, and how they should be configured, with regard to muxer
-configuration, pullups, drive strength, input enable/disable and input schmitt.
-
-    node {
-        pinmux = <PIN_NUMBER_PINMUX>;
-        GENERIC_PINCONFIG;
-    };
-
-Required properties:
-- pinmux: Integer array, represents gpio pin number and mux setting.
-    Supported pin number and mux varies for different SoCs, and are defined
-    as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
-
-Optional properties:
-- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
-    bias-pull, bias-pull-down, input-enable, input-schmitt-enable,
-    input-schmitt-disable, output-enable output-low, output-high,
-    drive-strength, and slew-rate are valid.
-
-    Valid arguments for 'slew-rate' are '0' for no slew rate controlled and
-    '1' for slower slew rate respectively. Valid arguments for 'drive-strength'
-    is limited, such as 2, 4, 8, 12, or 16 in mA.
-
-    Some optional vendor properties as defined are valid to specify in a
-    pinconf subnode:
-    - mediatek,tdsel: An integer describing the steps for output level shifter
-      duty cycle when asserted (high pulse width adjustment). Valid arguments
-      are from 0 to 15.
-    - mediatek,rdsel: An integer describing the steps for input level shifter
-      duty cycle when asserted (high pulse width adjustment). Valid arguments
-      are from 0 to 63.
-    - mediatek,pull-up-adv: An integer describing the code R1R0 as 0, 1, 2
-      or 3 for the advanced pull-up resistors.
-    - mediatek,pull-down-adv: An integer describing the code R1R0 as 0, 1, 2,
-      or 3 for the advanced pull-down resistors.
-
-Examples:
-
-        pio: pinctrl@10005000 {
-                compatible = "mediatek,mt6797-pinctrl";
-                reg = <0 0x10005000 0 0x1000>,
-                      <0 0x10002000 0 0x400>,
-                      <0 0x10002400 0 0x400>,
-                      <0 0x10002800 0 0x400>,
-                      <0 0x10002C00 0 0x400>;
-                reg-names = "gpio", "iocfgl", "iocfgb",
-                            "iocfgr", "iocfgt";
-                gpio-controller;
-                #gpio-cells = <2>;
-
-                uart1_pins_a: uart1 {
-                        pins1 {
-                                pinmux = <MT6797_GPIO232__FUNC_URXD1>,
-                                         <MT6797_GPIO233__FUNC_UTXD1>;
-                        };
-                };
-        };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
deleted file mode 100644
index 7a7aca1ed705..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
+++ /dev/null
@@ -1,490 +0,0 @@
-== MediaTek MT7622 pinctrl controller ==
-
-Required properties for the root node:
- - compatible: Should be one of the following
-	       "mediatek,mt7622-pinctrl" for MT7622 SoC
-	       "mediatek,mt7629-pinctrl" for MT7629 SoC
- - reg: offset and length of the pinctrl space
-
- - gpio-controller: Marks the device node as a GPIO controller.
- - #gpio-cells: Should be two. The first cell is the pin number and the
-   second is the GPIO flags.
-
-Optional properties:
-- interrupt-controller  : Marks the device node as an interrupt controller
-
-If the property interrupt-controller is defined, following property is required
-- reg-names: A string describing the "reg" entries. Must contain "eint".
-- interrupts : The interrupt output from the controller.
-- #interrupt-cells: Should be two.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-MT7622 pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, slew rate, etc.
-
-We support 2 types of configuration nodes. Those nodes can be either pinmux
-nodes or pinconf nodes. Each configuration node can consist of multiple nodes
-describing the pinmux and pinconf options.
-
-The name of each subnode doesn't matter as long as it is unique; all subnodes
-should be enumerated and processed purely based on their content.
-
-== pinmux nodes content ==
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pinmux subnode:
-
-Required properties are:
- - groups: An array of strings. Each string contains the name of a group.
-  Valid values for these names are listed below.
- - function: A string containing the name of the function to mux to the
-  group. Valid values for function names are listed below.
-
-== pinconf nodes content ==
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pinconf subnode:
-
-Required properties are:
- - pins: An array of strings. Each string contains the name of a pin.
-  Valid values for these names are listed below.
- - groups: An array of strings. Each string contains the name of a group.
-  Valid values for these names are listed below.
-
-Optional properies are:
- bias-disable, bias-pull, bias-pull-down, input-enable,
- input-schmitt-enable, input-schmitt-disable, output-enable
- output-low, output-high, drive-strength, slew-rate
-
- Valid arguments for 'slew-rate' are '0' for no slew rate controlled and '1' for
- slower slew rate respectively.
- Valid arguments for 'drive-strength', 4, 8, 12, or 16 in mA.
-
-The following specific properties as defined are valid to specify in a pinconf
-subnode:
-
-Optional properties are:
- - mediatek,tdsel: An integer describing the steps for output level shifter duty
-   cycle when asserted (high pulse width adjustment). Valid arguments are from 0
-   to 15.
- - mediatek,rdsel: An integer describing the steps for input level shifter duty
-   cycle when asserted (high pulse width adjustment). Valid arguments are from 0
-   to 63.
-
-== Valid values for pins, function and groups on MT7622 ==
-
-Valid values for pins are:
-pins can be referenced via the pin names as the below table shown and the
-related physical number is also put ahead of those names which helps cross
-references to pins between groups to know whether pins assignment conflict
-happens among devices try to acquire those available pins.
-
-	Pin #:  Valid values for pins
-	-----------------------------
-	PIN 0: "GPIO_A"
-	PIN 1: "I2S1_IN"
-	PIN 2: "I2S1_OUT"
-	PIN 3: "I2S_BCLK"
-	PIN 4: "I2S_WS"
-	PIN 5: "I2S_MCLK"
-	PIN 6: "TXD0"
-	PIN 7: "RXD0"
-	PIN 8: "SPI_WP"
-	PIN 9: "SPI_HOLD"
-	PIN 10: "SPI_CLK"
-	PIN 11: "SPI_MOSI"
-	PIN 12: "SPI_MISO"
-	PIN 13: "SPI_CS"
-	PIN 14: "I2C_SDA"
-	PIN 15: "I2C_SCL"
-	PIN 16: "I2S2_IN"
-	PIN 17: "I2S3_IN"
-	PIN 18: "I2S4_IN"
-	PIN 19: "I2S2_OUT"
-	PIN 20: "I2S3_OUT"
-	PIN 21: "I2S4_OUT"
-	PIN 22: "GPIO_B"
-	PIN 23: "MDC"
-	PIN 24: "MDIO"
-	PIN 25: "G2_TXD0"
-	PIN 26: "G2_TXD1"
-	PIN 27: "G2_TXD2"
-	PIN 28: "G2_TXD3"
-	PIN 29: "G2_TXEN"
-	PIN 30: "G2_TXC"
-	PIN 31: "G2_RXD0"
-	PIN 32: "G2_RXD1"
-	PIN 33: "G2_RXD2"
-	PIN 34: "G2_RXD3"
-	PIN 35: "G2_RXDV"
-	PIN 36: "G2_RXC"
-	PIN 37: "NCEB"
-	PIN 38: "NWEB"
-	PIN 39: "NREB"
-	PIN 40: "NDL4"
-	PIN 41: "NDL5"
-	PIN 42: "NDL6"
-	PIN 43: "NDL7"
-	PIN 44: "NRB"
-	PIN 45: "NCLE"
-	PIN 46: "NALE"
-	PIN 47: "NDL0"
-	PIN 48: "NDL1"
-	PIN 49: "NDL2"
-	PIN 50: "NDL3"
-	PIN 51: "MDI_TP_P0"
-	PIN 52: "MDI_TN_P0"
-	PIN 53: "MDI_RP_P0"
-	PIN 54: "MDI_RN_P0"
-	PIN 55: "MDI_TP_P1"
-	PIN 56: "MDI_TN_P1"
-	PIN 57: "MDI_RP_P1"
-	PIN 58: "MDI_RN_P1"
-	PIN 59: "MDI_RP_P2"
-	PIN 60: "MDI_RN_P2"
-	PIN 61: "MDI_TP_P2"
-	PIN 62: "MDI_TN_P2"
-	PIN 63: "MDI_TP_P3"
-	PIN 64: "MDI_TN_P3"
-	PIN 65: "MDI_RP_P3"
-	PIN 66: "MDI_RN_P3"
-	PIN 67: "MDI_RP_P4"
-	PIN 68: "MDI_RN_P4"
-	PIN 69: "MDI_TP_P4"
-	PIN 70: "MDI_TN_P4"
-	PIN 71: "PMIC_SCL"
-	PIN 72: "PMIC_SDA"
-	PIN 73: "SPIC1_CLK"
-	PIN 74: "SPIC1_MOSI"
-	PIN 75: "SPIC1_MISO"
-	PIN 76: "SPIC1_CS"
-	PIN 77: "GPIO_D"
-	PIN 78: "WATCHDOG"
-	PIN 79: "RTS3_N"
-	PIN 80: "CTS3_N"
-	PIN 81: "TXD3"
-	PIN 82: "RXD3"
-	PIN 83: "PERST0_N"
-	PIN 84: "PERST1_N"
-	PIN 85: "WLED_N"
-	PIN 86: "EPHY_LED0_N"
-	PIN 87: "AUXIN0"
-	PIN 88: "AUXIN1"
-	PIN 89: "AUXIN2"
-	PIN 90: "AUXIN3"
-	PIN 91: "TXD4"
-	PIN 92: "RXD4"
-	PIN 93: "RTS4_N"
-	PIN 94: "CST4_N"
-	PIN 95: "PWM1"
-	PIN 96: "PWM2"
-	PIN 97: "PWM3"
-	PIN 98: "PWM4"
-	PIN 99: "PWM5"
-	PIN 100: "PWM6"
-	PIN 101: "PWM7"
-	PIN 102: "GPIO_E"
-
-Valid values for function are:
-	"emmc", "eth", "i2c", "i2s", "ir", "led", "flash", "pcie",
-	"pmic", "pwm", "sd", "spi", "tdm", "uart", "watchdog"
-
-Valid values for groups are:
-additional data is put followingly with valid value allowing us to know which
-applicable function and which relevant pins (in pin#) are able applied for that
-group.
-
-	Valid value			function	pins (in pin#)
-	-------------------------------------------------------------------------
-	"emmc"				"emmc"		40, 41, 42, 43, 44, 45,
-							47, 48, 49, 50
-	"emmc_rst"			"emmc"		37
-	"esw"				"eth"		51, 52, 53, 54, 55, 56,
-							57, 58, 59, 60, 61, 62,
-							63, 64, 65, 66, 67, 68,
-							69, 70
-	"esw_p0_p1"			"eth"		51, 52, 53, 54, 55, 56,
-							57, 58
-	"esw_p2_p3_p4"			"eth"		59, 60, 61, 62, 63, 64,
-							65, 66, 67, 68, 69, 70
-	"rgmii_via_esw"			"eth"		59, 60, 61, 62, 63, 64,
-							65, 66, 67, 68, 69, 70
-	"rgmii_via_gmac1"		"eth"		59, 60, 61, 62, 63, 64,
-							65, 66, 67, 68, 69, 70
-	"rgmii_via_gmac2"		"eth"		25, 26, 27, 28, 29, 30,
-							31, 32, 33, 34, 35, 36
-	"mdc_mdio"			"eth"		23, 24
-	"i2c0"				"i2c"		14, 15
-	"i2c1_0"			"i2c"		55, 56
-	"i2c1_1"			"i2c"		73, 74
-	"i2c1_2"			"i2c"		87, 88
-	"i2c2_0"			"i2c"		57, 58
-	"i2c2_1"			"i2c"		75, 76
-	"i2c2_2"			"i2c"		89, 90
-	"i2s_in_mclk_bclk_ws"		"i2s"		3, 4, 5
-	"i2s1_in_data"			"i2s"		1
-	"i2s2_in_data"			"i2s"		16
-	"i2s3_in_data"			"i2s"		17
-	"i2s4_in_data"			"i2s"		18
-	"i2s_out_mclk_bclk_ws"		"i2s"		3, 4, 5
-	"i2s1_out_data"			"i2s"		2
-	"i2s2_out_data"			"i2s"		19
-	"i2s3_out_data"			"i2s"		20
-	"i2s4_out_data"			"i2s"		21
-	"ir_0_tx"			"ir"		16
-	"ir_1_tx"			"ir"		59
-	"ir_2_tx"			"ir"		99
-	"ir_0_rx"			"ir"		17
-	"ir_1_rx"			"ir"		60
-	"ir_2_rx"			"ir"		100
-	"ephy_leds"			"led"		86, 91, 92, 93, 94
-	"ephy0_led"			"led"		86
-	"ephy1_led"			"led"		91
-	"ephy2_led"			"led"		92
-	"ephy3_led"			"led"		93
-	"ephy4_led"			"led"		94
-	"wled"				"led"		85
-	"par_nand"			"flash"		37, 38, 39, 40, 41, 42,
-							43, 44, 45, 46, 47, 48,
-							49, 50
-	"snfi"				"flash"		8, 9, 10, 11, 12, 13
-	"spi_nor"			"flash"		8, 9, 10, 11, 12, 13
-	"pcie0_0_waken"			"pcie"		14
-	"pcie0_1_waken"			"pcie"		79
-	"pcie1_0_waken"			"pcie"		14
-	"pcie0_0_clkreq"		"pcie"		15
-	"pcie0_1_clkreq"		"pcie"		80
-	"pcie1_0_clkreq"		"pcie"		15
-	"pcie0_pad_perst"		"pcie"		83
-	"pcie1_pad_perst"		"pcie"		84
-	"pmic_bus"			"pmic"		71, 72
-	"pwm_ch1_0"			"pwm"		51
-	"pwm_ch1_1"			"pwm"		73
-	"pwm_ch1_2"			"pwm"		95
-	"pwm_ch2_0"			"pwm"		52
-	"pwm_ch2_1"			"pwm"		74
-	"pwm_ch2_2"			"pwm"		96
-	"pwm_ch3_0"			"pwm"		53
-	"pwm_ch3_1"			"pwm"		75
-	"pwm_ch3_2"			"pwm"		97
-	"pwm_ch4_0"			"pwm"		54
-	"pwm_ch4_1"			"pwm"		67
-	"pwm_ch4_2"			"pwm"		76
-	"pwm_ch4_3"			"pwm"		98
-	"pwm_ch5_0"			"pwm"		68
-	"pwm_ch5_1"			"pwm"		77
-	"pwm_ch5_2"			"pwm"		99
-	"pwm_ch6_0"			"pwm"		69
-	"pwm_ch6_1"			"pwm"		78
-	"pwm_ch6_2"			"pwm"		81
-	"pwm_ch6_3"			"pwm"		100
-	"pwm_ch7_0"			"pwm"		70
-	"pwm_ch7_1"			"pwm"		82
-	"pwm_ch7_2"			"pwm"		101
-	"sd_0"				"sd"		16, 17, 18, 19, 20, 21
-	"sd_1"				"sd"		25, 26, 27, 28, 29, 30
-	"spic0_0"			"spi"		63, 64, 65, 66
-	"spic0_1"			"spi"		79, 80, 81, 82
-	"spic1_0"			"spi"		67, 68, 69, 70
-	"spic1_1"			"spi"		73, 74, 75, 76
-	"spic2_0_wp_hold"		"spi"		8, 9
-	"spic2_0"			"spi"		10, 11, 12, 13
-	"tdm_0_out_mclk_bclk_ws"	"tdm"		8, 9, 10
-	"tdm_0_in_mclk_bclk_ws"		"tdm"		11, 12, 13
-	"tdm_0_out_data"		"tdm"		20
-	"tdm_0_in_data"			"tdm"		21
-	"tdm_1_out_mclk_bclk_ws"	"tdm"		57, 58, 59
-	"tdm_1_in_mclk_bclk_ws"		"tdm"		60, 61, 62
-	"tdm_1_out_data"		"tdm"		55
-	"tdm_1_in_data"			"tdm"		56
-	"uart0_0_tx_rx"			"uart"		6, 7
-	"uart1_0_tx_rx"			"uart"		55, 56
-	"uart1_0_rts_cts"		"uart"		57, 58
-	"uart1_1_tx_rx"			"uart"		73, 74
-	"uart1_1_rts_cts"		"uart"		75, 76
-	"uart2_0_tx_rx"			"uart"		3, 4
-	"uart2_0_rts_cts"		"uart"		1, 2
-	"uart2_1_tx_rx"			"uart"		51, 52
-	"uart2_1_rts_cts"		"uart"		53, 54
-	"uart2_2_tx_rx"			"uart"		59, 60
-	"uart2_2_rts_cts"		"uart"		61, 62
-	"uart2_3_tx_rx"			"uart"		95, 96
-	"uart3_0_tx_rx"			"uart"		57, 58
-	"uart3_1_tx_rx"			"uart"		81, 82
-	"uart3_1_rts_cts"		"uart"		79, 80
-	"uart4_0_tx_rx"			"uart"		61, 62
-	"uart4_1_tx_rx"			"uart"		91, 92
-	"uart4_1_rts_cts"		"uart"		93, 94
-	"uart4_2_tx_rx"			"uart"		97, 98
-	"uart4_2_rts_cts"		"uart"		95, 96
-	"watchdog"			"watchdog"	78
-
-
-== Valid values for pins, function and groups on MT7629 ==
-
-	Pin #:  Valid values for pins
-	-----------------------------
-	PIN 0: "TOP_5G_CLK"
-	PIN 1: "TOP_5G_DATA"
-	PIN 2: "WF0_5G_HB0"
-	PIN 3: "WF0_5G_HB1"
-	PIN 4: "WF0_5G_HB2"
-	PIN 5: "WF0_5G_HB3"
-	PIN 6: "WF0_5G_HB4"
-	PIN 7: "WF0_5G_HB5"
-	PIN 8: "WF0_5G_HB6"
-	PIN 9: "XO_REQ"
-	PIN 10: "TOP_RST_N"
-	PIN 11: "SYS_WATCHDOG"
-	PIN 12: "EPHY_LED0_N_JTDO"
-	PIN 13: "EPHY_LED1_N_JTDI"
-	PIN 14: "EPHY_LED2_N_JTMS"
-	PIN 15: "EPHY_LED3_N_JTCLK"
-	PIN 16: "EPHY_LED4_N_JTRST_N"
-	PIN 17: "WF2G_LED_N"
-	PIN 18: "WF5G_LED_N"
-	PIN 19: "I2C_SDA"
-	PIN 20: "I2C_SCL"
-	PIN 21: "GPIO_9"
-	PIN 22: "GPIO_10"
-	PIN 23: "GPIO_11"
-	PIN 24: "GPIO_12"
-	PIN 25: "UART1_TXD"
-	PIN 26: "UART1_RXD"
-	PIN 27: "UART1_CTS"
-	PIN 28: "UART1_RTS"
-	PIN 29: "UART2_TXD"
-	PIN 30: "UART2_RXD"
-	PIN 31: "UART2_CTS"
-	PIN 32: "UART2_RTS"
-	PIN 33: "MDI_TP_P1"
-	PIN 34: "MDI_TN_P1"
-	PIN 35: "MDI_RP_P1"
-	PIN 36: "MDI_RN_P1"
-	PIN 37: "MDI_RP_P2"
-	PIN 38: "MDI_RN_P2"
-	PIN 39: "MDI_TP_P2"
-	PIN 40: "MDI_TN_P2"
-	PIN 41: "MDI_TP_P3"
-	PIN 42: "MDI_TN_P3"
-	PIN 43: "MDI_RP_P3"
-	PIN 44: "MDI_RN_P3"
-	PIN 45: "MDI_RP_P4"
-	PIN 46: "MDI_RN_P4"
-	PIN 47: "MDI_TP_P4"
-	PIN 48: "MDI_TN_P4"
-	PIN 49: "SMI_MDC"
-	PIN 50: "SMI_MDIO"
-	PIN 51: "PCIE_PERESET_N"
-	PIN 52: "PWM_0"
-	PIN 53: "GPIO_0"
-	PIN 54: "GPIO_1"
-	PIN 55: "GPIO_2"
-	PIN 56: "GPIO_3"
-	PIN 57: "GPIO_4"
-	PIN 58: "GPIO_5"
-	PIN 59: "GPIO_6"
-	PIN 60: "GPIO_7"
-	PIN 61: "GPIO_8"
-	PIN 62: "SPI_CLK"
-	PIN 63: "SPI_CS"
-	PIN 64: "SPI_MOSI"
-	PIN 65: "SPI_MISO"
-	PIN 66: "SPI_WP"
-	PIN 67: "SPI_HOLD"
-	PIN 68: "UART0_TXD"
-	PIN 69: "UART0_RXD"
-	PIN 70: "TOP_2G_CLK"
-	PIN 71: "TOP_2G_DATA"
-	PIN 72: "WF0_2G_HB0"
-	PIN 73: "WF0_2G_HB1"
-	PIN 74: "WF0_2G_HB2"
-	PIN 75: "WF0_2G_HB3"
-	PIN 76: "WF0_2G_HB4"
-	PIN 77: "WF0_2G_HB5"
-	PIN 78: "WF0_2G_HB6"
-
-Valid values for function are:
-	"eth", "i2c", "led", "flash", "pcie", "pwm", "spi", "uart",
-	"watchdog", "wifi"
-
-Valid values for groups are:
-	Valid value			function	pins (in pin#)
-	----------------------------------------------------------------
-	"mdc_mdio"			"eth"		23, 24
-	"i2c_0"				"i2c"		19, 20
-	"i2c_1"				"i2c"		53, 54
-	"ephy_leds"			"led"		12, 13, 14, 15, 16,
-							17, 18
-	"ephy0_led"			"led"		12
-	"ephy1_led"			"led"		13
-	"ephy2_led"			"led"		14
-	"ephy3_led"			"led"		15
-	"ephy4_led"			"led"		16
-	"wf2g_led"			"led"		17
-	"wf5g_led"			"led"		18
-	"snfi"				"flash"		62, 63, 64, 65, 66, 67
-	"spi_nor"			"flash"		62, 63, 64, 65, 66, 67
-	"pcie_pereset"			"pcie"		51
-	"pcie_wake"			"pcie"		55
-	"pcie_clkreq"			"pcie"		56
-	"pwm_0"				"pwm"		52
-	"pwm_1"				"pwm"		61
-	"spi_0"				"spi"		21, 22, 23, 24
-	"spi_1"				"spi"		62, 63, 64, 65
-	"spi_wp"			"spi"		66
-	"spi_hold"			"spi"		67
-	"uart0_txd_rxd"			"uart"		68, 69
-	"uart1_0_txd_rxd"		"uart"		25, 26
-	"uart1_0_cts_rts"		"uart"		27, 28
-	"uart1_1_txd_rxd"		"uart"		53, 54
-	"uart1_1_cts_rts"		"uart"		55, 56
-	"uart2_0_txd_rxd"		"uart"		29, 30
-	"uart2_0_cts_rts"		"uart"		31, 32
-	"uart2_1_txd_rxd"		"uart"		57, 58
-	"uart2_1_cts_rts"		"uart"		59, 60
-	"watchdog"			"watchdog"	11
-	"wf0_2g"			"wifi"		70, 71, 72, 73, 74,
-							75, 76, 77, 78
-	"wf0_5g"			"wifi"		0, 1, 2, 3, 4, 5, 6,
-							7, 8, 9, 10
-
-Example:
-
-	pio: pinctrl@10211000 {
-		compatible = "mediatek,mt7622-pinctrl";
-		reg = <0 0x10211000 0 0x1000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		pinctrl_eth_default: eth-default {
-			mux-mdio {
-				groups = "mdc_mdio";
-				function = "eth";
-				drive-strength = <12>;
-			};
-
-			mux-gmac2 {
-				groups = "gmac2";
-				function = "eth";
-				drive-strength = <12>;
-			};
-
-			mux-esw {
-				groups = "esw";
-				function = "eth";
-				drive-strength = <8>;
-			};
-
-			conf-mdio {
-				pins = "MDC";
-				bias-pull-up;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt
deleted file mode 100644
index eccbe3f55d3f..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-* Mediatek MT8183 Pin Controller
-
-The Mediatek's Pin controller is used to control SoC pins.
-
-Required properties:
-- compatible: value should be one of the following.
-	"mediatek,mt8183-pinctrl", compatible with mt8183 pinctrl.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
-  binding is used, the amount of cells must be specified as 2. See the below
-  mentioned gpio binding representation for description of particular cells.
-- gpio-ranges : gpio valid number range.
-- reg: physical address base for gpio base registers. There are 10 GPIO
-  physical address base in mt8183.
-
-Optional properties:
-- reg-names: gpio base register names. There are 10 gpio base register
-  names in mt8183. They are "iocfg0", "iocfg1", "iocfg2", "iocfg3", "iocfg4",
-  "iocfg5", "iocfg6", "iocfg7", "iocfg8", "eint".
-- interrupt-controller: Marks the device node as an interrupt controller
-- #interrupt-cells: Should be two.
-- interrupts : The interrupt outputs to sysirq.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices.
-
-Subnode format
-A pinctrl node should contain at least one subnodes representing the
-pinctrl groups available on the machine. Each subnode will list the
-pins it needs, and how they should be configured, with regard to muxer
-configuration, pullups, drive strength, input enable/disable and input schmitt.
-
-    node {
-	pinmux = <PIN_NUMBER_PINMUX>;
-	GENERIC_PINCONFIG;
-    };
-
-Required properties:
-- pinmux: integer array, represents gpio pin number and mux setting.
-    Supported pin number and mux varies for different SoCs, and are defined
-    as macros in boot/dts/<soc>-pinfunc.h directly.
-
-Optional properties:
-- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
-    bias-pull-down, bias-pull-up, input-enable, input-disable, output-low,
-    output-high, input-schmitt-enable, input-schmitt-disable
-    and drive-strength are valid.
-
-    Some special pins have extra pull up strength, there are R0 and R1 pull-up
-    resistors available, but for user, it's only need to set R1R0 as 00, 01,
-    10 or 11. So It needs config "mediatek,pull-up-adv" or
-    "mediatek,pull-down-adv" to support arguments for those special pins.
-    Valid arguments are from 0 to 3.
-
-    mediatek,tdsel: An integer describing the steps for output level shifter
-      duty cycle when asserted (high pulse width adjustment). Valid arguments
-      are from 0 to 15.
-    mediatek,rdsel: An integer describing the steps for input level shifter
-      duty cycle when asserted (high pulse width adjustment). Valid arguments
-      are from 0 to 63.
-
-    When config drive-strength, it can support some arguments, such as
-    MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h.
-    It can only support 2/4/6/8/10/12/14/16mA in mt8183.
-    For I2C pins, there are existing generic driving setup and the specific
-    driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA driving
-    adjustment in generic driving setup. But in specific driving setup,
-    they can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
-    driving setup for I2C pins, the existing generic driving setup will be
-    disabled. For some special features, we need the I2C pins specific
-    driving setup. The specific driving setup is controlled by E1E0EN.
-    So we need add extra vendor driving preperty instead of
-    the generic driving property.
-    We can add "mediatek,drive-strength-adv = <XXX>;" to describe the specific
-    driving setup property. "XXX" means the value of E1E0EN. EN is 0 or 1.
-    It is used to enable or disable the specific driving setup.
-    E1E0 is used to describe the detail strength specification of the I2C pin.
-    When E1=0/E0=0, the strength is 0.125mA.
-    When E1=0/E0=1, the strength is 0.25mA.
-    When E1=1/E0=0, the strength is 0.5mA.
-    When E1=1/E0=1, the strength is 1mA.
-    So the valid arguments of "mediatek,drive-strength-adv" are from 0 to 7.
-
-Examples:
-
-#include "mt8183-pinfunc.h"
-
-...
-{
-	pio: pinctrl@10005000 {
-		compatible = "mediatek,mt8183-pinctrl";
-		reg = <0 0x10005000 0 0x1000>,
-		      <0 0x11f20000 0 0x1000>,
-		      <0 0x11e80000 0 0x1000>,
-		      <0 0x11e70000 0 0x1000>,
-		      <0 0x11e90000 0 0x1000>,
-		      <0 0x11d30000 0 0x1000>,
-		      <0 0x11d20000 0 0x1000>,
-		      <0 0x11c50000 0 0x1000>,
-		      <0 0x11f30000 0 0x1000>,
-		      <0 0x1000b000 0 0x1000>;
-		reg-names = "iocfg0", "iocfg1", "iocfg2",
-			    "iocfg3", "iocfg4", "iocfg5",
-			    "iocfg6", "iocfg7", "iocfg8",
-			    "eint";
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&pio 0 0 192>;
-		interrupt-controller;
-		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-
-		i2c0_pins_a: i2c0 {
-			pins1 {
-				pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
-					 <PINMUX_GPIO49__FUNC_SDA5>;
-				mediatek,pull-up-adv = <3>;
-				mediatek,drive-strength-adv = <7>;
-			};
-		};
-
-		i2c1_pins_a: i2c1 {
-			pins {
-				pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
-					 <PINMUX_GPIO51__FUNC_SDA3>;
-				mediatek,pull-down-adv = <2>;
-				mediatek,drive-strength-adv = <4>;
-			};
-		};
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
new file mode 100644
index 000000000000..26573a793b57
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
@@ -0,0 +1,276 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8186.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8186 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+description: |
+  The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8186-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names: true
+
+  reg:
+    description: |
+      Physical address base for gpio base registers. There are 8 different GPIO
+      physical address base in mt8186.
+    maxItems: 8
+
+  reg-names:
+    description: |
+      Gpio base register names.
+    items:
+      - const: iocfg0
+      - const: iocfg_lt
+      - const: iocfg_lm
+      - const: iocfg_lb
+      - const: iocfg_bl
+      - const: iocfg_rb
+      - const: iocfg_rt
+      - const: eint
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq
+    maxItems: 1
+
+  mediatek,rsel-resistance-in-si-unit:
+    type: boolean
+    description: |
+      Identifying i2c pins pull up/down type which is RSEL. It can support
+      RSEL define or si unit value(ohm) to set different resistance.
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and
+          input schmitt.
+          An example of using macro:
+          pincontroller {
+            /* GPIO0 set as multifunction GPIO0 */
+            gpio-pins {
+              pins {
+                pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+              }
+            };
+            /* GPIO128 set as multifunction SDA0 */
+            i2c0-pins {
+              pins {
+                pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+              }
+            };
+          };
+        $ref: "pinmux-node.yaml"
+
+        properties:
+          pinmux:
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
+              directly.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8186 pull down PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203]
+                description: mt8186 pull down RSEL type define value.
+              - enum: [75000, 5000]
+                description: mt8186 pull down RSEL type si unit value(ohm).
+            description: |
+              For pull down type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8186.
+              For pull down type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+              define in mt8186. It can also support resistance value(ohm)
+              "75000" & "5000" in mt8186.
+              An example of using RSEL define:
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+                    bias-pull-down = <MTK_PULL_SET_RSEL_001>;
+                  }
+                };
+              };
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel-resistance-in-si-unit;
+              }
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+                    bias-pull-down = <75000>;
+                  }
+                };
+              };
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8186 pull up PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203]
+                description: mt8186 pull up RSEL type define value.
+              - enum: [1000, 5000, 10000, 75000]
+                description: mt8186 pull up RSEL type si unit value(ohm).
+            description: |
+              For pull up type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8186.
+              For pull up type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+              define in mt8186. It can also support resistance value(ohm)
+              "1000" & "5000" & "10000" & "75000" in mt8186.
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel-resistance-in-si-unit;
+              }
+              pincontroller {
+                i2c0-pins {
+                  pins {
+                    pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+                    bias-pull-up = <1000>;
+                  }
+                };
+              };
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pio: pinctrl@10005000 {
+      compatible = "mediatek,mt8186-pinctrl";
+      reg = <0x10005000 0x1000>,
+            <0x10002000 0x0200>,
+            <0x10002200 0x0200>,
+            <0x10002400 0x0200>,
+            <0x10002600 0x0200>,
+            <0x10002A00 0x0200>,
+            <0x10002c00 0x0200>,
+            <0x1000b000 0x1000>;
+      reg-names = "iocfg0", "iocfg_lt", "iocfg_lm",
+                  "iocfg_lb", "iocfg_bl", "iocfg_rb",
+                  "iocfg_rt", "eint";
+      gpio-controller;
+      #gpio-cells = <2>;
+      gpio-ranges = <&pio 0 0 185>;
+      interrupt-controller;
+      interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
+      #interrupt-cells = <2>;
+
+      pio-pins {
+        pins {
+          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+          output-low;
+        };
+      };
+
+      spi0-pins {
+        pins-spi {
+          pinmux = <PINMUX_GPIO0__FUNC_SPI0_CLK_B>,
+                   <PINMUX_GPIO1__FUNC_SPI0_CSB_B>,
+                   <PINMUX_GPIO2__FUNC_SPI0_MO_B>;
+          bias-disable;
+        };
+        pins-spi-mi {
+          pinmux = <PINMUX_GPIO3__FUNC_SPI0_MI_B>;
+          bias-pull-down;
+        };
+      };
+
+      i2c0-pins {
+        pins {
+          pinmux = <PINMUX_GPIO127__FUNC_SCL0>,
+                   <PINMUX_GPIO128__FUNC_SDA0>;
+          bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+          drive-strength-microamp = <1000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
new file mode 100644
index 000000000000..e0e943e5b874
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8192.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8192 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+description: |
+  The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8192-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    description: gpio valid number range.
+    maxItems: 1
+
+  gpio-line-names: true
+
+  reg:
+    description: |
+      Physical address base for gpio base registers. There are 11 GPIO
+      physical address base in mt8192.
+    maxItems: 11
+
+  reg-names:
+    description: |
+      Gpio base register names.
+    maxItems: 11
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and
+          input schmitt.
+        $ref: "pinmux-node.yaml"
+
+        properties:
+          pinmux:
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are defined
+              as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+          drive-strength:
+            description: |
+              It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See
+              dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+                description: normal pull down.
+              - enum: [100, 101, 102, 103]
+                description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+              - enum: [200, 201, 202, 203]
+                description: RSEL pull down type. See MTK_PULL_SET_RSEL_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+                description: normal pull up.
+              - enum: [100, 101, 102, 103]
+                description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+              - enum: [200, 201, 202, 203]
+                description: RSEL pull up type. See MTK_PULL_SET_RSEL_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+        additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+            #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+            #include <dt-bindings/interrupt-controller/arm-gic.h>
+            pio: pinctrl@10005000 {
+                    compatible = "mediatek,mt8192-pinctrl";
+                    reg = <0x10005000 0x1000>,
+                          <0x11c20000 0x1000>,
+                          <0x11d10000 0x1000>,
+                          <0x11d30000 0x1000>,
+                          <0x11d40000 0x1000>,
+                          <0x11e20000 0x1000>,
+                          <0x11e70000 0x1000>,
+                          <0x11ea0000 0x1000>,
+                          <0x11f20000 0x1000>,
+                          <0x11f30000 0x1000>,
+                          <0x1000b000 0x1000>;
+                    reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
+                          "iocfg_bl", "iocfg_br", "iocfg_lm",
+                          "iocfg_lb", "iocfg_rt", "iocfg_lt",
+                          "iocfg_tl", "eint";
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    gpio-ranges = <&pio 0 0 220>;
+                    interrupt-controller;
+                    interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
+                    #interrupt-cells = <2>;
+
+                    spi1-default-pins {
+                            pins-cs-mosi-clk {
+                                    pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
+                                             <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
+                                             <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
+                                    bias-disable;
+                            };
+
+                            pins-miso {
+                                    pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
+                                    bias-pull-down;
+                            };
+                    };
+            };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
new file mode 100644
index 000000000000..66fe17e9e4d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
@@ -0,0 +1,287 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8195.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8195 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+description: |
+  The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    description: gpio valid number range.
+    maxItems: 1
+
+  gpio-line-names: true
+
+  reg:
+    description: |
+      Physical address base for gpio base registers. There are 8 GPIO
+      physical address base in mt8195.
+    maxItems: 8
+
+  reg-names:
+    description: |
+      Gpio base register names.
+    maxItems: 8
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+  mediatek,rsel-resistance-in-si-unit:
+    type: boolean
+    description: |
+      Identifying i2c pins pull up/down type which is RSEL. It can support
+      RSEL define or si unit value(ohm) to set different resistance.
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and
+          input schmitt.
+          An example of using macro:
+          pincontroller {
+            /* GPIO0 set as multifunction GPIO0 */
+            gpio-pins {
+              pins {
+                pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+              }
+            };
+            /* GPIO8 set as multifunction SDA0 */
+            i2c0-pins {
+              pins {
+                pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+              }
+            };
+          };
+        $ref: "pinmux-node.yaml"
+
+        properties:
+          pinmux:
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
+              directly.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8195 pull down PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8195 pull down RSEL type define value.
+              - enum: [75000, 5000]
+                description: mt8195 pull down RSEL type si unit value(ohm).
+            description: |
+              For pull down type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8195.
+              For pull down type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+              & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
+              & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+              define in mt8195. It can also support resistance value(ohm)
+              "75000" & "5000" in mt8195.
+
+              An example of using RSEL define:
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-down = <MTK_PULL_SET_RSEL_001>;
+                  }
+                };
+              };
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel-resistance-in-si-unit;
+              }
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-down = <75000>;
+                  }
+                };
+              };
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8195 pull up PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8195 pull up RSEL type define value.
+              - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
+                description: mt8195 pull up RSEL type si unit value(ohm).
+            description: |
+              For pull up type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8195.
+              For pull up type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+              & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
+              & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+              define in mt8195. It can also support resistance value(ohm)
+              "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" &
+              "75000" in mt8195.
+              An example of using RSEL define:
+              pincontroller {
+                i2c0-pins {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+                  }
+                };
+              };
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel-resistance-in-si-unit;
+              }
+              pincontroller {
+                i2c0-pins {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-up = <1000>;
+                  }
+                };
+              };
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #
+    pio: pinctrl@10005000 {
+      compatible = "mediatek,mt8195-pinctrl";
+      reg = <0x10005000 0x1000>,
+            <0x11d10000 0x1000>,
+            <0x11d30000 0x1000>,
+            <0x11d40000 0x1000>,
+            <0x11e20000 0x1000>,
+            <0x11eb0000 0x1000>,
+            <0x11f40000 0x1000>,
+            <0x1000b000 0x1000>;
+      reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
+                  "iocfg_br", "iocfg_lm", "iocfg_rb",
+                  "iocfg_tl", "eint";
+      gpio-controller;
+      #gpio-cells = <2>;
+      gpio-ranges = <&pio 0 0 144>;
+      interrupt-controller;
+      interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
+      #interrupt-cells = <2>;
+
+      pio-pins {
+        pins {
+          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+          output-low;
+        };
+      };
+
+      spi0-pins {
+        pins-spi {
+          pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>,
+                   <PINMUX_GPIO134__FUNC_SPIM0_MO>,
+                   <PINMUX_GPIO133__FUNC_SPIM0_CLK>;
+          bias-disable;
+        };
+        pins-spi-mi {
+          pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>;
+          bias-pull-down;
+        };
+      };
+
+      i2c0-pins {
+        pins {
+          pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+                   <PINMUX_GPIO9__FUNC_SCL0>;
+          bias-disable;
+          drive-strength-microamp = <1000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
index cbcbd31e3ce8..939cb5b6ffea 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
@@ -27,7 +27,7 @@ Required properties:
 - pins: List of pins. Valid values of pins properties are: gpio0, gpio1.
 
 First 2 properties must be added in the RK805 PMIC node, documented in
-Documentation/devicetree/bindings/mfd/rk808.txt
+Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
 
 Optional properties:
 -------------------
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
index e705acd3612c..bfd222b05495 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
@@ -8,7 +8,7 @@ Required properties:
 - reg : offset and length of the register set for the mux registers
 
 - #pinctrl-cells : number of cells in addition to the index, set to 1
-  for pinctrl-single,pins and 2 for pinctrl-single,bits
+  or 2 for pinctrl-single,pins and set to 2 for pinctrl-single,bits
 
 - pinctrl-single,register-width : pinmux register access width in bits
 
@@ -80,7 +80,7 @@ Optional properties:
   property.
 
 		/* pin base, nr pins & gpio function */
-		pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1>;
+		pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>;
 
 - interrupt-controller : standard interrupt controller binding if using
   interrupts for wake-up events for example. In this case pinctrl-single
@@ -94,16 +94,23 @@ pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as
 specified in the pinctrl-bindings.txt document in this directory.
 
 The pin configuration nodes for pinctrl-single are specified as pinctrl
-register offset and value pairs using pinctrl-single,pins. Only the bits
-specified in pinctrl-single,function-mask are updated. For example, setting
-a pin for a device could be done with:
+register offset and values using pinctrl-single,pins. Only the bits specified
+in pinctrl-single,function-mask are updated.
+
+When #pinctrl-cells = 1, then setting a pin for a device could be done with:
 
 	pinctrl-single,pins = <0xdc 0x118>;
 
-Where 0xdc is the offset from the pinctrl register base address for the
-device pinctrl register, and 0x118 contains the desired value of the
-pinctrl register. See the device example and static board pins example
-below for more information.
+Where 0xdc is the offset from the pinctrl register base address for the device
+pinctrl register, and 0x118 contains the desired value of the pinctrl register.
+
+When #pinctrl-cells = 2, then setting a pin for a device could be done with:
+
+	pinctrl-single,pins = <0xdc 0x30 0x07>;
+
+Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value.
+These two values are OR'd together to produce the value stored at offset 0xdc.
+See the device example and static board pins example below for more information.
 
 In case when one register changes more than one pin's mux the
 pinctrl-single,bits need to be used which takes three parameters:
@@ -178,10 +185,10 @@ pmx_gpio: pinmux@d401e000 {
 	pinctrl-single,function-mask = <7>;
 
 	/* sparse GPIO range could be supported */
-	pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
-				&range 12 1 0 &range 13 29 1
-				&range 43 1 0 &range 44 49 1
-				&range 94 1 1 &range 96 2 1>;
+	pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>,
+				    <&range 12 1 0>, <&range 13 29 1>,
+				    <&range 43 1 0>, <&range 44 49 1>,
+				    <&range 94 1 1>, <&range 96 2 1>;
 
 	range: gpio-range {
 		#pinctrl-single,gpio-range-cells = <3>;
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt
deleted file mode 100644
index c1b4c1819b84..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt
+++ /dev/null
@@ -1,116 +0,0 @@
-STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings
-
-ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion.
-Please refer to ../mfd/stmfx.txt for STMFX Core bindings.
-
-Required properties:
-- compatible: should be "st,stmfx-0300-pinctrl".
-- #gpio-cells: should be <2>, the first cell is the GPIO number and the second
-  cell is the gpio flags in accordance with <dt-bindings/gpio/gpio.h>.
-- gpio-controller: marks the device as a GPIO controller.
-- #interrupt-cells: should be <2>, the first cell is the GPIO number and the
-  second cell is the interrupt flags in accordance with
-  <dt-bindings/interrupt-controller/irq.h>.
-- interrupt-controller: marks the device as an interrupt controller.
-- gpio-ranges: specifies the mapping between gpio controller and pin
-  controller pins. Check "Concerning gpio-ranges property" below.
-Please refer to ../gpio/gpio.txt.
-
-Please refer to pinctrl-bindings.txt for pin configuration.
-
-Required properties for pin configuration sub-nodes:
-- pins: list of pins to which the configuration applies.
-
-Optional properties for pin configuration sub-nodes (pinconf-generic ones):
-- bias-disable: disable any bias on the pin.
-- bias-pull-up: the pin will be pulled up.
-- bias-pull-pin-default: use the pin-default pull state.
-- bias-pull-down: the pin will be pulled down.
-- drive-open-drain: the pin will be driven with open drain.
-- drive-push-pull: the pin will be driven actively high and low.
-- output-high: the pin will be configured as an output driving high level.
-- output-low: the pin will be configured as an output driving low level.
-
-Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are
-called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2".
-
-Concerning gpio-ranges property:
-- if all STMFX pins[24:0] are available (no other STMFX function in use), you
-  should use gpio-ranges = <&stmfx_pinctrl 0 0 24>;
-- if agpio[3:0] are not available (STMFX Touchscreen function in use), you
-  should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>;
-- if agpio[7:4] are not available (STMFX IDD function in use), you
-  should use gpio-ranges = <&stmfx_pinctrl 0 0 20>;
-
-
-Example:
-
-	stmfx: stmfx@42 {
-		...
-
-		stmfx_pinctrl: stmfx-pin-controller {
-			compatible = "st,stmfx-0300-pinctrl";
-			#gpio-cells = <2>;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-			gpio-ranges = <&stmfx_pinctrl 0 0 24>;
-
-			joystick_pins: joystick {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
-				drive-push-pull;
-				bias-pull-up;
-			};
-		};
-	};
-
-Example of STMFX GPIO consumers:
-
-	joystick {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&joystick_pins>;
-		pinctrl-names = "default";
-		button-0 {
-			label = "JoySel";
-			linux,code = <KEY_ENTER>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <0 IRQ_TYPE_EDGE_RISING>;
-		};
-		button-1 {
-			label = "JoyDown";
-			linux,code = <KEY_DOWN>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <1 IRQ_TYPE_EDGE_RISING>;
-		};
-		button-2 {
-			label = "JoyLeft";
-			linux,code = <KEY_LEFT>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <2 IRQ_TYPE_EDGE_RISING>;
-		};
-		button-3 {
-			label = "JoyRight";
-			linux,code = <KEY_RIGHT>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-		};
-		button-4 {
-			label = "JoyUp";
-			linux,code = <KEY_UP>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		orange {
-			gpios = <&stmfx_pinctrl 17 1>;
-		};
-
-		blue {
-			gpios = <&stmfx_pinctrl 19 1>;
-		};
-	}
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
deleted file mode 100644
index 39170f372599..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-* ZTE ZX Pin Controller
-
-The pin controller on ZTE ZX platforms is kinda of hybrid.  It consists of
-a main controller and an auxiliary one.  For example, on ZX296718 SoC, the
-main controller is TOP_PMM and the auxiliary one is AON_IOCFG.  Both
-controllers work together to control pin multiplexing and configuration in
-the way illustrated as below.
-
-
-           GMII_RXD3 ---+
-                        |
-             DVI1_HS ---+----------------------------- GMII_RXD3 (TOP pin)
-                        |
-             BGPIO16 ---+                               ^
-                                                        | pinconf
-                        ^                               |
-                        | pinmux                        |
-                        |                               |
-
-                   TOP_PMM (main)           AON_IOCFG (aux)
-
-                        |                       |       |
-                        |                pinmux |       |
-                        | pinmux                v       |
-                        v                               | pinconf
-                                    KEY_ROW2 ---+       v
-        PORT1_LCD_TE ---+                       |
-                        |            AGPIO10 ---+------ KEY_ROW2 (AON pin)
-          I2S0_DOUT3 ---+                       |
-                        |-----------------------+
-            PWM_OUT3 ---+
-                        |
-             VGA_VS1 ---+
-
-
-For most of pins like GMII_RXD3 in the figure, the pinmux function is
-controlled by TOP_PMM block only, and this type of pins are meant by term
-'TOP pins'.  For pins like KEY_ROW2, the pinmux is controlled by both
-TOP_PMM and AON_IOCFG blocks, as the available multiplexing functions for
-the pin spread in both controllers.  This type of pins are called 'AON pins'.
-Though pinmux implementation is quite different, pinconf is same for both
-types of pins.  Both are controlled by auxiliary controller, i.e. AON_IOCFG
-on ZX296718.
-
-Required properties:
-- compatible: should be "zte,zx296718-pmm".
-- reg: the register physical address and length.
-- zte,auxiliary-controller: phandle to the auxiliary pin controller which
-  implements pinmux for AON pins and pinconf for all pins.
-
-The following pin configuration are supported. Please refer to
-pinctrl-bindings.txt in this directory for more details of the common
-pinctrl bindings used by client devices.
-
-- bias-pull-up
-- bias-pull-down
-- drive-strength
-- input-enable
-- slew-rate
-
-Examples:
-
-iocfg: pin-controller@119000 {
-	compatible = "zte,zx296718-iocfg";
-	reg = <0x119000 0x1000>;
-};
-
-pmm: pin-controller@1462000 {
-	compatible = "zte,zx296718-pmm";
-	reg = <0x1462000 0x1000>;
-	zte,auxiliary-controller = <&iocfg>;
-};
-
-&pmm {
-	vga_pins: vga {
-		pins = "KEY_COL1", "KEY_COL2", "KEY_ROW1", "KEY_ROW2";
-		function = "VGA";
-	};
-};
-
-&vga {
-	pinctrl-names = "default";
-	pinctrl-0 = <&vga_pins>;
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml
new file mode 100644
index 000000000000..d471563119a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pin controller device
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Pin controller devices should contain the pin configuration nodes that client
+  devices reference.
+
+  The contents of each of those pin configuration child nodes is defined
+  entirely by the binding for the individual pin controller device. There
+  exists no common standard for this content. The pinctrl framework only
+  provides generic helper bindings that the pin controller driver can use.
+
+  The pin configuration nodes need not be direct children of the pin controller
+  device; they may be grandchildren, for example. Whether this is legal, and
+  whether there is any interaction between the child and intermediate parent
+  nodes, is again defined entirely by the binding for the individual pin
+  controller device.
+
+properties:
+  $nodename:
+    pattern: "^(pinctrl|pinmux)(@[0-9a-f]+)?$"
+
+  "#pinctrl-cells":
+    description: >
+      Number of pin control cells in addition to the index within the pin
+      controller device instance.
+
+  pinctrl-use-default:
+    type: boolean
+    description: >
+      Indicates that the OS can use the boot default pin configuration. This
+      allows using an OS that does not have a driver for the pin controller.
+      This property can be set either globally for the pin controller or in
+      child nodes for individual pin group control.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
index 732d9075560b..551df3d9b809 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
@@ -122,11 +122,12 @@ properties:
       this, "pins" or "pinmux" has to be specified)
 
   pinmux:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
     description:
       The list of numeric pin ids and their mux settings that properties in the
       node apply to (either this, "pins" or "groups" have to be specified)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   pinctrl-pin-array:
     $ref: /schemas/types.yaml#/definitions/uint32-array
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
index 84be0f2c6f3b..97858a7c07a2 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
@@ -26,7 +26,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-The pin configuration nodes act as a container for an abitrary number of
+The pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
@@ -44,7 +44,8 @@ information about e.g. the mux function.
 
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength.
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
+ drive-strength.
 
 Non-empty subnodes must specify the 'pins' property.
 Note that not all properties are valid for all pins.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
new file mode 100644
index 000000000000..931e5c190ead
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq6018-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. IPQ6018 TLMM block
+
+maintainers:
+  - Sricharan R <sricharan@codeaurora.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  IPQ6018 platform.
+
+properties:
+  compatible:
+    const: qcom,ipq6018-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pinmux$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+                      sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+                      qdsd_data3 ]
+        minItems: 1
+        maxItems: 4
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
+                atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac,
+                atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0,
+                atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c,
+                blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi,
+                blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi,
+                blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi,
+                blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi,
+                blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst,
+                cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
+                cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v,
+                dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
+                flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+                gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0,
+                gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2,
+                ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc,
+                nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s,
+                pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+                pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+                pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
+                qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
+                qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
+                qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+                qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write,
+                sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3,
+                uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        tlmm: pinctrl@1000000 {
+              compatible = "qcom,ipq6018-pinctrl";
+              reg = <0x01000000 0x300000>;
+              interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+              interrupt-controller;
+              #interrupt-cells = <2>;
+              gpio-controller;
+              #gpio-cells = <2>;
+              gpio-ranges = <&tlmm 0 0 80>;
+
+              serial3-pinmux {
+                      pins = "gpio44", "gpio45";
+                      function = "blsp2_uart";
+                      drive-strength = <8>;
+                      bias-pull-down;
+              };
+        };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml
new file mode 100644
index 000000000000..f7bd4be1739e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MDM9607 TLMM block
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  MDM9607 platform.
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,mdm9607-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-mdm9607-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-mdm9607-tlmm-state"
+
+'$defs':
+  qcom-mdm9607-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+                      sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+                      qdsd_data3 ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
+                atest_char1, atest_char2, atest_char3,
+                atest_combodac_to_gpio_native, atest_gpsadc_dtest0_native,
+                atest_gpsadc_dtest1_native, atest_tsens, backlight_en_b,
+                bimc_dte0, bimc_dte1, blsp1_spi, blsp2_spi, blsp3_spi,
+                blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
+                blsp_i2c6, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4,
+                blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uart3,
+                blsp_uart4, blsp_uart5, blsp_uart6, blsp_uim1, blsp_uim2,
+                codec_int, codec_rst, coex_uart, cri_trng, cri_trng0,
+                cri_trng1, dbg_out, ebi0_wrcdc, ebi2_a, ebi2_a_d_8_b,
+                ebi2_lcd, ebi2_lcd_cs_n_b, ebi2_lcd_te_b, eth_irq, eth_rst,
+                gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b,
+                gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gmac_mdio,
+                gpio, gsm0_tx, lcd_rst, ldo_en, ldo_update, m_voc, modem_tsync,
+                nav_ptp_pps_in_a, nav_ptp_pps_in_b, nav_tsync_out_a,
+                nav_tsync_out_b, pa_indicator, pbs0, pbs1, pbs2,
+                pri_mi2s_data0_a, pri_mi2s_data1_a, pri_mi2s_mclk_a,
+                pri_mi2s_sck_a, pri_mi2s_ws_a, prng_rosc, ptp_pps_out_a,
+                ptp_pps_out_b, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+                pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+                pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
+                qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+                qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1,
+                qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
+                qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, rcm_marker1,
+                rcm_marker2, sd_write, sec_mi2s, sensor_en, sensor_int2,
+                sensor_int3, sensor_rst, ssbi1, ssbi2, touch_rst, ts_int,
+                uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
+                uim2_data, uim2_present, uim2_reset, uim_batt, wlan_en1, ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        tlmm: pinctrl@1000000 {
+          compatible = "qcom,mdm9607-tlmm";
+          reg = <0x01000000 0x300000>;
+          interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+          gpio-controller;
+          gpio-ranges = <&msmgpio 0 0 80>;
+          #gpio-cells = <2>;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+        };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
new file mode 100644
index 000000000000..ab4a2b4cfda2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8226 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  MSM8226 platform.
+
+properties:
+  compatible:
+    const: qcom,msm8226-pinctrl
+
+  reg:
+    description: Specifies the base address and size of the TLMM register space
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
+                blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
+                blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
+                blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        msmgpio: pinctrl@fd510000 {
+                compatible = "qcom,msm8226-pinctrl";
+                reg = <0xfd510000 0x4000>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&msmgpio 0 0 117>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+                serial-pins {
+                        pins = "gpio8", "gpio9";
+                        function = "blsp_uart3";
+                        drive-strength = <8>;
+                        bias-disable;
+                };
+        };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
new file mode 100644
index 000000000000..e03530091478
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8909-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8909 TLMM block
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the MSM8909 platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,msm8909-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8909-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-msm8909-tlmm-state"
+
+$defs:
+  qcom-msm8909-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-7])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+                      sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1,
+                      qdsd_data2, qdsd_data3 ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
+                atest_char1, atest_char2, atest_char3, atest_combodac,
+                atest_gpsadc0, atest_gpsadc1, atest_wlan0, atest_wlan1,
+                bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+                blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1,
+                blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1,
+                blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1,
+                blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6,
+                blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, cam_mclk,
+                cci_async, cci_timer0, cci_timer1, cci_timer2, cdc_pdm0,
+                dbg_out, dmic0_clk, dmic0_data, ebi0_wrcdc, ebi2_a, ebi2_lcd,
+                ext_lpass, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+                gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gpio,
+                gsm0_tx, ldo_en, ldo_update, m_voc, mdp_vsync, modem_tsync,
+                nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2,
+                pri_mi2s_data0_a, pri_mi2s_data0_b, pri_mi2s_data1_a,
+                pri_mi2s_data1_b, pri_mi2s_mclk_a, pri_mi2s_mclk_b,
+                pri_mi2s_sck_a, pri_mi2s_sck_b, pri_mi2s_ws_a, pri_mi2s_ws_b,
+                prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+                pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+                pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
+                qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+                qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+                qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_tracectl_a,
+                qdss_tracedata_a, qdss_tracedata_b, sd_write, sec_mi2s,
+                smb_int, ssbi0, ssbi1, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+                uim3_clk, uim3_data, uim3_present, uim3_reset, uim_batt,
+                wcss_bt, wcss_fm, wcss_wlan ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        pinctrl@1000000 {
+                compatible = "qcom,msm8909-tlmm";
+                reg = <0x1000000 0x300000>;
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 117>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+
+                gpio-wo-subnode-state {
+                        pins = "gpio1";
+                        function = "gpio";
+                };
+
+                uart-w-subnodes-state {
+                        rx {
+                                pins = "gpio4";
+                                function = "blsp_uart1";
+                                bias-pull-up;
+                        };
+
+                        tx {
+                                pins = "gpio5";
+                                function = "blsp_uart1";
+                                bias-disable;
+                        };
+                };
+        };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
new file mode 100644
index 000000000000..d4da558cde54
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8953-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8953 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  MSM8953 platform.
+
+properties:
+  compatible:
+    const: qcom,msm8953-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  gpio-reserved-ranges: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+                      sdc2_cmd, sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0,
+                      qdsd_data1, qdsd_data2, qdsd_data3 ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ accel_int, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1,
+                atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
+                atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native, atest_tsens,
+                atest_wlan0, atest_wlan1, bimc_dte0, bimc_dte1, blsp1_spi,
+                blsp3_spi, blsp6_spi, blsp7_spi, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+                blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_spi1,
+                blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
+                blsp_spi8, blsp_uart2, blsp_uart4, blsp_uart5, blsp_uart6, cam0_ldo,
+                cam1_ldo, cam1_rst, cam1_standby, cam2_rst, cam2_standby, cam3_rst,
+                cam3_standby, cam_irq, cam_mclk, cap_int, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cdc_pdm0, codec_int1, codec_int2, codec_reset, cri_trng, cri_trng0,
+                cri_trng1, dac_calib0, dac_calib1, dac_calib10, dac_calib11,
+                dac_calib12, dac_calib13, dac_calib14, dac_calib15, dac_calib16,
+                dac_calib17, dac_calib18, dac_calib19, dac_calib2, dac_calib20,
+                dac_calib21, dac_calib22, dac_calib23, dac_calib24, dac_calib25,
+                dac_calib3, dac_calib4, dac_calib5, dac_calib6, dac_calib7,
+                dac_calib8, dac_calib9, dbg_out, ddr_bist, dmic0_clk, dmic0_data,
+                ebi_cdc, ebi_ch0, ext_lpass, flash_strobe, fp_int, gcc_gp1_clk_a,
+                gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a,
+                gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gpio, gsm0_tx, gsm1_tx,
+                gyro_int, hall_int, hdmi_int, key_focus, key_home, key_snapshot,
+                key_volp, ldo_en, ldo_update, lpass_slimbus, lpass_slimbus0,
+                lpass_slimbus1, m_voc, mag_int, mdp_vsync, mipi_dsi0, modem_tsync,
+                mss_lte, nav_pps, nav_pps_in_a, nav_pps_in_b, nav_tsync,
+                nfc_disable, nfc_dwl, nfc_irq, ois_sync, pa_indicator, pbs0, pbs1,
+                pbs2, pressure_int, pri_mi2s, pri_mi2s_mclk_a, pri_mi2s_mclk_b,
+                pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+                pwr_down, pwr_modem_enabled_a, pwr_modem_enabled_b,
+                pwr_nav_enabled_a, pwr_nav_enabled_b, qdss_cti_trig_in_a0,
+                qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
+                qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+                qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
+                qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+                qdss_tracedata_b, sd_write, sdcard_det, sec_mi2s, sec_mi2s_mclk_a,
+                sec_mi2s_mclk_b, smb_int, ss_switch, ssbi_wtr1, ts_resout,
+                ts_sample, ts_xvdd, tsens_max, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+                uim_batt, us_emitter, us_euro, wcss_bt, wcss_fm, wcss_wlan,
+                wcss_wlan0, wcss_wlan1, wcss_wlan2, wsa_en, wsa_io, wsa_irq ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        tlmm: pinctrl@1000000 {
+              compatible = "qcom,msm8953-pinctrl";
+              reg = <0x01000000 0x300000>;
+              interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+              interrupt-controller;
+              #interrupt-cells = <2>;
+              gpio-controller;
+              #gpio-cells = <2>;
+              gpio-ranges = <&tlmm 0 0 142>;
+
+              serial_default: serial-pins {
+                    pins = "gpio4", "gpio5";
+                    function = "blsp_uart2";
+                    drive-strength = <2>;
+                    bias-disable;
+              };
+        };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
deleted file mode 100644
index 7be5de8d253f..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ /dev/null
@@ -1,267 +0,0 @@
-Qualcomm PMIC GPIO block
-
-This binding describes the GPIO block(s) found in the 8xxx series of
-PMIC's from Qualcomm.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8005-gpio"
-		    "qcom,pm8018-gpio"
-		    "qcom,pm8038-gpio"
-		    "qcom,pm8058-gpio"
-		    "qcom,pm8916-gpio"
-		    "qcom,pm8917-gpio"
-		    "qcom,pm8921-gpio"
-		    "qcom,pm8941-gpio"
-		    "qcom,pm8950-gpio"
-		    "qcom,pm8994-gpio"
-		    "qcom,pm8998-gpio"
-		    "qcom,pma8084-gpio"
-		    "qcom,pmi8950-gpio"
-		    "qcom,pmi8994-gpio"
-		    "qcom,pmi8998-gpio"
-		    "qcom,pms405-gpio"
-		    "qcom,pm8150-gpio"
-		    "qcom,pm8150b-gpio"
-		    "qcom,pm6150-gpio"
-		    "qcom,pm6150l-gpio"
-
-		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
-		    if the device is on an spmi bus or an ssbi bus respectively
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Register base of the GPIO block and length.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Must contain an array of encoded interrupt specifiers for
-		    each available GPIO
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: Mark the device node as a GPIO controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 2;
-		    the first cell will be used to define gpio number and the
-		    second denotes the flags for this gpio
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin or a list of pins. This configuration can include the
-mux function to select on those pin(s), and various pin configuration
-parameters, as listed below.
-
-
-SUBNODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.  Valid pins are:
-		    gpio1-gpio4 for pm8005
-		    gpio1-gpio6 for pm8018
-		    gpio1-gpio12 for pm8038
-		    gpio1-gpio40 for pm8058
-		    gpio1-gpio4 for pm8916
-		    gpio1-gpio38 for pm8917
-		    gpio1-gpio44 for pm8921
-		    gpio1-gpio36 for pm8941
-		    gpio1-gpio8 for pm8950 (hole on gpio3)
-		    gpio1-gpio22 for pm8994
-		    gpio1-gpio26 for pm8998
-		    gpio1-gpio22 for pma8084
-		    gpio1-gpio2 for pmi8950
-		    gpio1-gpio10 for pmi8994
-		    gpio1-gpio12 for pms405 (holes on gpio1, gpio9 and gpio10)
-		    gpio1-gpio10 for pm8150 (holes on gpio2, gpio5, gpio7
-					     and gpio8)
-		    gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7)
-		    gpio1-gpio12 for pm8150l (hole on gpio7)
-		    gpio1-gpio10 for pm6150
-		    gpio1-gpio12 for pm6150l
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins.  Valid values are:
-		    "normal",
-		    "paired",
-		    "func1",
-		    "func2",
-		    "dtest1",
-		    "dtest2",
-		    "dtest3",
-		    "dtest4",
-		    And following values are supported by LV/MV GPIO subtypes:
-		    "func3",
-		    "func4"
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <empty>
-	Definition: The specified pins should be configured as pull up.
-
-- qcom,pull-up-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Specifies the strength to use for pull up, if selected.
-		    Valid values are; as defined in
-		    <dt-bindings/pinctrl/qcom,pmic-gpio.h>:
-		    1: 30uA                     (PMIC_GPIO_PULL_UP_30)
-		    2: 1.5uA                    (PMIC_GPIO_PULL_UP_1P5)
-		    3: 31.5uA                   (PMIC_GPIO_PULL_UP_31P5)
-		    4: 1.5uA + 30uA boost       (PMIC_GPIO_PULL_UP_1P5_30)
-		    If this property is omitted 30uA strength will be used if
-		    pull up is selected
-
-- bias-high-impedance:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins will put in high-Z mode and disabled.
-
-- input-enable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are put in input mode.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-
-- power-source:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the power source for the specified pins. Valid
-		    power sources are defined per chip in
-		    <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-- qcom,drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins. Value
-		    drive strengths are:
-		    0: no (PMIC_GPIO_STRENGTH_NO)
-		    1: high (PMIC_GPIO_STRENGTH_HIGH) 0.9mA @ 1.8V - 1.9mA @ 2.6V
-		    2: medium (PMIC_GPIO_STRENGTH_MED) 0.6mA @ 1.8V - 1.25mA @ 2.6V
-		    3: low (PMIC_GPIO_STRENGTH_LOW) 0.15mA @ 1.8V - 0.3mA @ 2.6V
-		    as defined in <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-- drive-push-pull:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in push-pull mode.
-
-- drive-open-drain:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in open-drain mode.
-
-- drive-open-source:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in open-source mode.
-
-- qcom,analog-pass:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in analog-pass-through mode.
-
-- qcom,atest:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects ATEST rail to route to GPIO when it's configured
-		    in analog-pass-through mode.
-		    Valid values are 1-4 corresponding to ATEST1 to ATEST4.
-
-- qcom,dtest-buffer:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects DTEST rail to route to GPIO when it's configured
-		    as digital input.
-		    Valid values are 1-4 corresponding to DTEST1 to DTEST4.
-
-Example:
-
-	pm8921_gpio: gpio@150 {
-		compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio";
-		reg = <0x150 0x160>;
-		interrupts = <192 1>, <193 1>, <194 1>,
-			     <195 1>, <196 1>, <197 1>,
-			     <198 1>, <199 1>, <200 1>,
-			     <201 1>, <202 1>, <203 1>,
-			     <204 1>, <205 1>, <206 1>,
-			     <207 1>, <208 1>, <209 1>,
-			     <210 1>, <211 1>, <212 1>,
-			     <213 1>, <214 1>, <215 1>,
-			     <216 1>, <217 1>, <218 1>,
-			     <219 1>, <220 1>, <221 1>,
-			     <222 1>, <223 1>, <224 1>,
-			     <225 1>, <226 1>, <227 1>,
-			     <228 1>, <229 1>, <230 1>,
-			     <231 1>, <232 1>, <233 1>,
-			     <234 1>, <235 1>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		pm8921_gpio_keys: gpio-keys {
-			volume-keys {
-				pins = "gpio20", "gpio21";
-				function = "normal";
-
-				input-enable;
-				bias-pull-up;
-				drive-push-pull;
-				qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-				power-source = <PM8921_GPIO_S4>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
new file mode 100644
index 000000000000..29dd503f9522
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -0,0 +1,538 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMIC GPIO block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This binding describes the GPIO block(s) found in the 8xxx series of
+  PMIC's from Qualcomm.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pm2250-gpio
+          - qcom,pm660-gpio
+          - qcom,pm660l-gpio
+          - qcom,pm6125-gpio
+          - qcom,pm6150-gpio
+          - qcom,pm6150l-gpio
+          - qcom,pm6350-gpio
+          - qcom,pm7250b-gpio
+          - qcom,pm7325-gpio
+          - qcom,pm8005-gpio
+          - qcom,pm8008-gpio
+          - qcom,pm8018-gpio
+          - qcom,pm8019-gpio
+          - qcom,pm8038-gpio
+          - qcom,pm8058-gpio
+          - qcom,pm8150-gpio
+          - qcom,pm8150b-gpio
+          - qcom,pm8150l-gpio
+          - qcom,pm8226-gpio
+          - qcom,pm8350-gpio
+          - qcom,pm8350b-gpio
+          - qcom,pm8350c-gpio
+          - qcom,pm8450-gpio
+          - qcom,pm8916-gpio
+          - qcom,pm8917-gpio
+          - qcom,pm8921-gpio
+          - qcom,pm8941-gpio
+          - qcom,pm8950-gpio
+          - qcom,pm8994-gpio
+          - qcom,pm8998-gpio
+          - qcom,pma8084-gpio
+          - qcom,pmi8950-gpio
+          - qcom,pmi8994-gpio
+          - qcom,pmi8998-gpio
+          - qcom,pmk8350-gpio
+          - qcom,pmm8155au-gpio
+          - qcom,pmp8074-gpio
+          - qcom,pmr735a-gpio
+          - qcom,pmr735b-gpio
+          - qcom,pms405-gpio
+          - qcom,pmx55-gpio
+          - qcom,pmx65-gpio
+
+      - enum:
+          - qcom,spmi-gpio
+          - qcom,ssbi-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names:
+    minItems: 2
+    maxItems: 44
+
+  gpio-reserved-ranges:
+    minItems: 1
+    # maxItems as half of total number of GPIOs, as there has to be at
+    # least one usable GPIO between each reserved range.
+    maxItems: 22
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell will be used to define gpio number and the
+      second denotes the flags for this gpio
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupt-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8008-gpio
+              - qcom,pmi8950-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 2
+          maxItems: 2
+        gpio-reserved-ranges:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8005-gpio
+              - qcom,pm8450-gpio
+              - qcom,pm8916-gpio
+              - qcom,pmk8350-gpio
+              - qcom,pmr735a-gpio
+              - qcom,pmr735b-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 4
+          maxItems: 4
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8018-gpio
+              - qcom,pm8019-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 6
+          maxItems: 6
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8226-gpio
+              - qcom,pm8350b-gpio
+              - qcom,pm8950-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 8
+          maxItems: 8
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm6350-gpio
+              - qcom,pm8350c-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 9
+          maxItems: 9
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm2250-gpio
+              - qcom,pm6150-gpio
+              - qcom,pm7325-gpio
+              - qcom,pm8150-gpio
+              - qcom,pm8350-gpio
+              - qcom,pmc8180-gpio
+              - qcom,pmi8994-gpio
+              - qcom,pmm8155au-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 10
+          maxItems: 10
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmx55-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 11
+          maxItems: 11
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660l-gpio
+              - qcom,pm6150l-gpio
+              - qcom,pm7250b-gpio
+              - qcom,pm8038-gpio
+              - qcom,pm8150b-gpio
+              - qcom,pm8150l-gpio
+              - qcom,pmc8180c-gpio
+              - qcom,pmp8074-gpio
+              - qcom,pms405-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 12
+          maxItems: 12
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 13
+          maxItems: 13
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmi8998-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 14
+          maxItems: 14
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmx65-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 16
+          maxItems: 16
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 8
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8994-gpio
+              - qcom,pma8084-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 22
+          maxItems: 22
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 11
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8998-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 26
+          maxItems: 26
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 13
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8941-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 36
+          maxItems: 36
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 18
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8917-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 38
+          maxItems: 38
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 19
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8058-gpio
+              - qcom,pm8921-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 44
+          maxItems: 44
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 22
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-pmic-gpio-state"
+      - patternProperties:
+          "(pinconf|-pins)$":
+            $ref: "#/$defs/qcom-pmic-gpio-state"
+        additionalProperties: false
+
+$defs:
+  qcom-pmic-gpio-state:
+    type: object
+    allOf:
+      - $ref: "pinmux-node.yaml"
+      - $ref: "pincfg-node.yaml"
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in
+          this subnode.  Valid pins are
+                 - gpio1-gpio9 for pm6125
+                 - gpio1-gpio10 for pm6150
+                 - gpio1-gpio12 for pm6150l
+                 - gpio1-gpio9 for pm6350
+                 - gpio1-gpio12 for pm7250b
+                 - gpio1-gpio10 for pm7325
+                 - gpio1-gpio4 for pm8005
+                 - gpio1-gpio2 for pm8008
+                 - gpio1-gpio6 for pm8018
+                 - gpio1-gpio12 for pm8038
+                 - gpio1-gpio40 for pm8058
+                 - gpio1-gpio10 for pm8150 (holes on gpio2, gpio5,
+                                            gpio7 and gpio8)
+                 - gpio1-gpio12 for pm8150b (holes on gpio3, gpio4
+                                             and gpio7)
+                 - gpio1-gpio12 for pm8150l (hole on gpio7)
+                 - gpio1-gpio4 for pm8916
+                 - gpio1-gpio10 for pm8350
+                 - gpio1-gpio8 for pm8350b
+                 - gpio1-gpio9 for pm8350c
+                 - gpio1-gpio4 for pm8450
+                 - gpio1-gpio38 for pm8917
+                 - gpio1-gpio44 for pm8921
+                 - gpio1-gpio36 for pm8941
+                 - gpio1-gpio8 for pm8950 (hole on gpio3)
+                 - gpio1-gpio22 for pm8994
+                 - gpio1-gpio26 for pm8998
+                 - gpio1-gpio22 for pma8084
+                 - gpio1-gpio2 for pmi8950
+                 - gpio1-gpio10 for pmi8994
+                 - gpio1-gpio4 for pmk8350
+                 - gpio1-gpio10 for pmm8155au
+                 - gpio1-gpio12 for pmp8074 (holes on gpio1 and gpio12)
+                 - gpio1-gpio4 for pmr735a
+                 - gpio1-gpio4 for pmr735b
+                 - gpio1-gpio12 for pms405 (holes on gpio1, gpio9
+                                            and gpio10)
+                 - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10
+                                            and gpio11)
+                 - gpio1-gpio16 for pmx65
+
+        items:
+          pattern: "^gpio([0-9]+)$"
+
+      function:
+        items:
+          - enum:
+              - normal
+              - paired
+              - func1
+              - func2
+              - dtest1
+              - dtest2
+              - dtest3
+              - dtest4
+              - func3  # supported by LV/MV GPIO subtypes
+              - func4  # supported by LV/MV GPIO subtypes
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+
+      qcom,pull-up-strength:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Specifies the strength to use for pull up, if selected.
+          Valid values are defined in
+          <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+          If this property is omitted 30uA strength will be used
+          if pull up is selected
+        enum: [0, 1, 2, 3]
+
+      bias-high-impedance: true
+      input-enable: true
+      input-disable: true
+      output-high: true
+      output-low: true
+      output-enable: true
+      output-disable: true
+      power-source: true
+
+      qcom,drive-strength:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects the drive strength for the specified pins
+          Valid drive strength values are defined in
+          <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+        enum: [0, 1, 2, 3]
+
+      drive-push-pull: true
+      drive-open-drain: true
+      drive-open-source: true
+
+      qcom,analog-pass:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The specified pins are configured in
+          analog-pass-through mode.
+
+      qcom,atest:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects ATEST rail to route to GPIO when it's
+          configured in analog-pass-through mode.
+        enum: [1, 2, 3, 4]
+
+      qcom,dtest-buffer:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects DTEST rail to route to GPIO when it's
+          configured as digital input.
+        enum: [1, 2, 3, 4]
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+    pm8921_gpio: gpio@150 {
+      compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio";
+      reg = <0x150 0x160>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      gpio-controller;
+      gpio-ranges = <&pm8921_gpio 0 0 44>;
+      #gpio-cells = <2>;
+
+      pm8921_gpio_keys: gpio-keys-state {
+        volume-keys-pins {
+          pins = "gpio20", "gpio21";
+          function = "normal";
+
+          input-enable;
+          bias-pull-up;
+          drive-push-pull;
+          qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+          power-source = <PM8921_GPIO_S4>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
deleted file mode 100644
index 448d36a85730..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
+++ /dev/null
@@ -1,185 +0,0 @@
-Qualcomm PMIC Multi-Purpose Pin (MPP) block
-
-This binding describes the MPP block(s) found in the 8xxx series
-of PMIC's from Qualcomm.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Should contain one of:
-		    "qcom,pm8018-mpp",
-		    "qcom,pm8038-mpp",
-		    "qcom,pm8058-mpp",
-		    "qcom,pm8821-mpp",
-		    "qcom,pm8841-mpp",
-		    "qcom,pm8916-mpp",
-		    "qcom,pm8917-mpp",
-		    "qcom,pm8921-mpp",
-		    "qcom,pm8941-mpp",
-		    "qcom,pm8950-mpp",
-		    "qcom,pmi8950-mpp",
-		    "qcom,pm8994-mpp",
-		    "qcom,pma8084-mpp",
-
-		    And must contain either "qcom,spmi-mpp" or "qcom,ssbi-mpp"
-		    if the device is on an spmi bus or an ssbi bus respectively.
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Register base of the MPP block and length.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Must contain an array of encoded interrupt specifiers for
-		    each available MPP
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: Mark the device node as a GPIO controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 2;
-		    the first cell will be used to define MPP number and the
-		    second denotes the flags for this MPP
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin or a list of pins. This configuration can include the
-mux function to select on those pin(s), and various pin configuration
-parameters, as listed below.
-
-SUBNODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of MPP pins affected by the properties specified in
-		    this subnode.  Valid pins are:
-		    mpp1-mpp4 for pm8841
-		    mpp1-mpp4 for pm8916
-		    mpp1-mpp8 for pm8941
-		    mpp1-mpp4 for pm8950
-		    mpp1-mpp4 for pmi8950
-		    mpp1-mpp4 for pma8084
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins.  Valid values are:
-		    "digital",
-		    "analog",
-		    "sink"
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <u32>
-	Definition: The specified pins should be configured as pull up.
-		    Valid values are 600, 10000 and 30000 in bidirectional mode
-		    only, i.e. when operating in qcom,analog-mode and input and
-		    outputs are enabled. The hardware ignores the configuration
-		    when operating in other modes.
-
-- bias-high-impedance:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins will put in high-Z mode and disabled.
-
-- input-enable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are put in input mode, i.e. their input
-		    buffer is enabled
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-
-- power-source:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the power source for the specified pins. Valid power
-		    sources are defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-
-- qcom,analog-level:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the source for analog output. Valued values are
-		    defined in <dt-binding/pinctrl/qcom,pmic-mpp.h>
-		    PMIC_MPP_AOUT_LVL_*
-
-- qcom,dtest:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects which dtest rail to be routed in the various functions.
-		    Valid values are 1-4
-
-- qcom,amux-route:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the source for analog input. Valid values are
-		    defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-		    PMIC_MPP_AMUX_ROUTE_CH5, PMIC_MPP_AMUX_ROUTE_CH6...
-- qcom,paired:
-	Usage: optional
-	Value type: <none>
-	Definition: Indicates that the pin should be operating in paired mode.
-
-Example:
-
-	mpps@a000 {
-		compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
-		reg = <0xa000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupts = <4 0xa0 0 0>, <4 0xa1 0 0>, <4 0xa2 0 0>, <4 0xa3 0 0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pm8841_default>;
-
-		pm8841_default: default {
-			gpio {
-				pins = "mpp1", "mpp2", "mpp3", "mpp4";
-				function = "digital";
-				input-enable;
-				power-source = <PM8841_MPP_S3>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
new file mode 100644
index 000000000000..df79274d0ec3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-mpp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMIC Multi-Purpose Pin (MPP) block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This binding describes the MPP block(s) found in the 8xxx series of
+  PMIC's from Qualcomm.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pm8018-mpp
+          - qcom,pm8019-mpp
+          - qcom,pm8038-mpp
+          - qcom,pm8058-mpp
+          - qcom,pm8226-mpp
+          - qcom,pm8821-mpp
+          - qcom,pm8841-mpp
+          - qcom,pm8916-mpp
+          - qcom,pm8917-mpp
+          - qcom,pm8921-mpp
+          - qcom,pm8941-mpp
+          - qcom,pm8950-mpp
+          - qcom,pmi8950-mpp
+          - qcom,pm8994-mpp
+          - qcom,pma8084-mpp
+          - qcom,pmi8994-mpp
+
+      - enum:
+          - qcom,spmi-mpp
+          - qcom,ssbi-mpp
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+  gpio-line-names: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell will be used to define gpio number and the
+      second denotes the flags for this gpio
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupt-controller
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-pmic-mpp-state"
+      - patternProperties:
+          "mpp":
+            $ref: "#/$defs/qcom-pmic-mpp-state"
+        additionalProperties: false
+
+$defs:
+  qcom-pmic-mpp-state:
+    type: object
+    allOf:
+      - $ref: "pinmux-node.yaml"
+      - $ref: "pincfg-node.yaml"
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in
+          this subnode.  Valid pins are
+                 - mpp1-mpp4 for pm8841
+                 - mpp1-mpp4 for pm8916
+                 - mpp1-mpp8 for pm8941
+                 - mpp1-mpp4 for pm8950
+                 - mpp1-mpp4 for pmi8950
+                 - mpp1-mpp4 for pma8084
+
+        items:
+          pattern: "^mpp([0-9]+)$"
+
+      function:
+        items:
+          - enum:
+              - digital
+              - analog
+              - sink
+
+      bias-disable: true
+      bias-pull-up: true
+      bias-high-impedance: true
+      input-enable: true
+      output-high: true
+      output-low: true
+      power-source: true
+
+      qcom,analog-level:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects the source for analog output. Valued values are defined in
+          <dt-binding/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AOUT_LVL_*
+        enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+      qcom,atest:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects ATEST rail to route to GPIO when it's
+          configured in analog-pass-through mode.
+        enum: [1, 2, 3, 4]
+
+      qcom,dtest:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects DTEST rail to route to GPIO when it's
+          configured as digital input.
+        enum: [1, 2, 3, 4]
+
+      qcom,amux-route:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects the source for analog input. Valid values are defined in
+          <dt-bindings/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AMUX_ROUTE_CH5,
+          PMIC_MPP_AMUX_ROUTE_CH6...
+        enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+      qcom,paired:
+        - description:
+            Indicates that the pin should be operating in paired mode.
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+    pm8841_mpp: mpps@a000 {
+      compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
+      reg = <0xa000 0>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      gpio-ranges = <&pm8841_mpp 0 0 4>;
+      gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
+              "BT_LED_CTRL", "GPIO-F";
+      interrupt-controller;
+      #interrupt-cells = <2>;
+
+      pinctrl-names = "default";
+      pinctrl-0 = <&pm8841_default>;
+
+      mpp1-state {
+        pins = "mpp1";
+        function = "digital";
+        input-enable;
+        power-source = <PM8841_MPP_S3>;
+      };
+
+      default-state {
+        gpio-mpp {
+          pins = "mpp1", "mpp2", "mpp3", "mpp4";
+          function = "digital";
+          input-enable;
+          power-source = <PM8841_MPP_S3>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
new file mode 100644
index 000000000000..3f4f1c0360b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QCM2290 TLMM block
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description:
+  This binding describes the Top Level Mode Multiplexer block found in the
+  QCM2290 platform.
+
+properties:
+  compatible:
+    const: qcom,qcm2290-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  wakeup-parent: true
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-qcm2290-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-qcm2290-tlmm-state"
+
+'$defs':
+  qcom-qcm2290-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[0-6])$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
+                      sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, char_exec,
+                cri_trng, cri_trng0, cri_trng1, dac_calib, dbg_out, ddr_bist,
+                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2,
+                gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx,
+                jitter_bist, mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1,
+                mpm_pwr, mss_lte, m_voc, nav_gpio, pa_indicator, pbs0, pbs1,
+                pbs2, pbs3, pbs4, pbs5, pbs6, pbs7, pbs8, pbs9, pbs10, pbs11,
+                pbs12, pbs13, pbs14, pbs15, pbs_out, phase_flag, pll_bist,
+                pll_bypassnl, pll_reset, prng_rosc, pwm_0, pwm_1, pwm_2, pwm_3,
+                pwm_4, pwm_5, pwm_6, pwm_7, pwm_8, pwm_9, qdss_cti, qdss_gpio,
+                qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb, sdc2_tb, sd_write,
+                ssbi_wtr1, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm,
+                uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
+                uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1,
+                vsense_trigger, wlan1_adc0, wlan1_adc1 ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@500000 {
+        compatible = "qcom,qcm2290-tlmm";
+        reg = <0x500000 0x300000>;
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 127>;
+
+        sdc2_on_state: sdc2-on-state {
+            clk {
+                pins = "sdc2_clk";
+                bias-disable;
+                drive-strength = <16>;
+            };
+
+            cmd {
+                pins = "sdc2_cmd";
+                bias-pull-up;
+                drive-strength = <10>;
+            };
+
+            data {
+                pins = "sdc2_data";
+                bias-pull-up;
+                drive-strength = <10>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
new file mode 100644
index 000000000000..624e14f00790
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
+  Low Power Island (LPI) TLMM block
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  LPASS LPI IP on most Qualcomm SoCs
+
+properties:
+  compatible:
+    const: qcom,sc7280-lpass-lpi-pinctrl
+
+  qcom,adsp-bypass-mode:
+    description:
+      Tells ADSP is in bypass mode.
+    type: boolean
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9])$"
+        minItems: 1
+        maxItems: 15
+
+      function:
+        enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
+                qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
+                dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
+                i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
+                dmic3_data, i2s2_data ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+            0: No adjustments
+            1: Higher Slew rate (faster edges)
+            2: Lower Slew rate (slower edges)
+            3: Reserved (No adjustments)
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    lpass_tlmm: pinctrl@33c0000 {
+        compatible = "qcom,sc7280-lpass-lpi-pinctrl";
+        reg = <0x33c0000 0x20000>,
+              <0x3550000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpass_tlmm 0 0 15>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
new file mode 100644
index 000000000000..ad3496784678
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC7280 TLMM block
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SC7280 platform.
+
+properties:
+  compatible:
+    const: qcom,sc7280-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names:
+    maxItems: 174
+
+  wakeup-parent: true
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+                      sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, atest_char0, atest_char1, atest_char2,
+                atest_char3, atest_usb0, atest_usb00, atest_usb01,
+                atest_usb02, atest_usb03, atest_usb1, atest_usb10,
+                atest_usb11, atest_usb12, atest_usb13, audio_ref,
+                cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
+                cci_timer2, cci_timer3, cci_timer4, cmu_rng0, cmu_rng1,
+                cmu_rng2, cmu_rng3, coex_uart1, cri_trng, cri_trng0,
+                cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, dp_hot,
+                dp_lcd, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+                gpio, host2wlan_sol, ibi_i3c, jitter_bist, lpass_slimbus,
+                mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3,
+                mdp_vsync4, mdp_vsync5, mi2s0_data0, mi2s0_data1, mi2s0_sck,
+                mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mss_grfc0,
+                mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12, mss_grfc2,
+                mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7,
+                mss_grfc8, mss_grfc9, nav_gpio0, nav_gpio1, nav_gpio2,
+                pa_indicator, pcie0_clkreqn, pcie1_clkreqn, phase_flag,
+                pll_bist, pll_bypassnl, pll_clk, pll_reset, pri_mi2s, prng_rosc,
+                qdss, qdss_cti, qlink0_enable, qlink0_request, qlink0_wmss,
+                qlink1_enable, qlink1_request, qlink1_wmss, qspi_clk, qspi_cs,
+                qspi_data, qup00, qup01, qup02, qup03, qup04, qup05, qup06, qup07,
+                qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
+                sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, sd_write,
+                sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tsense_pwm1,
+                tsense_pwm2, uim0_clk, uim0_data, uim0_present, uim0_reset,
+                uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac,
+                usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: /schemas/pinctrl/pincfg-node.yaml
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$"
+        then:
+          required:
+            - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f000000 {
+        compatible = "qcom,sc7280-pinctrl";
+        reg = <0xf000000 0x1000000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 175>;
+        wakeup-parent = <&pdc>;
+
+        qup_uart5_default: qup-uart5-pins {
+            pins = "gpio46", "gpio47";
+            function = "qup13";
+            drive-strength = <2>;
+            bias-disable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
new file mode 100644
index 000000000000..b98eeba2c530
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC8180X TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SC8180X platform.
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8180x-tlmm
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: "west"
+      - const: "east"
+      - const: "south"
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sc8180x-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc8180x-tlmm-state"
+        additionalProperties: false
+
+'$defs':
+  qcom-sc8180x-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-8][0-9])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens,
+                atest_tsens2, atest_usb0, atest_usb1, atest_usb2, atest_usb3,
+                atest_usb4, audio_ref, btfm_slimbus, cam_mclk, cci_async,
+                cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, cci_timer5, cci_timer6, cci_timer7, cci_timer8,
+                cci_timer9, cri_trng, dbg_out, ddr_bist, ddr_pxi, debug_hot,
+                dp_hot, edp_hot, edp_lcd, emac_phy, emac_pps, gcc_gp1, gcc_gp2,
+                gcc_gp3, gcc_gp4, gcc_gp5, gpio, gps, grfc, hs1_mi2s, hs2_mi2s,
+                hs3_mi2s, jitter_bist, lpass_slimbus, m_voc, mdp_vsync,
+                mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4,
+                mdp_vsync5, mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1,
+                pci_e2, pci_e3, phase_flag, pll_bist, pll_bypassnl, pll_reset,
+                pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss_gpio, qlink,
+                qspi0, qspi0_clk, qspi0_cs, qspi1, qspi1_clk, qspi1_cs,
+                qua_mi2s, qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
+                qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
+                qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, sd_write, sdc4,
+                sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ter_mi2s, tgu,
+                tsense_pwm1, tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt,
+                usb0_phy, usb1_phy, usb2phy_ac, vfr_1, vsense_trigger,
+                wlan1_adc, wlan2_adc, wmss_reset ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-8][0-9])$"
+        then:
+          required:
+            - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@3100000 {
+        compatible = "qcom,sc8180x-tlmm";
+        reg = <0x03100000 0x300000>,
+              <0x03500000 0x700000>,
+              <0x03d00000 0x300000>;
+        reg-names = "west", "east", "south";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 190>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "qup6";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "qup6";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
new file mode 100644
index 000000000000..1f468303bb08
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
+  Low Power Island (LPI) TLMM block
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  LPASS LPI IP on most Qualcomm SoCs
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+      - description: LPASS LPI pins SLEW registers
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-1]|1[0-8]])$"
+
+      function:
+        enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
+                dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic4_clk,
+                dmic4_data, i2s2_clk, i2s2_ws, dmic3_clk, dmic3_data,
+                qua_mi2s_sclk, qua_mi2s_ws, qua_mi2s_data, i2s1_clk, i2s1_ws,
+                i2s1_data, wsa_swr_clk, wsa_swr_data, wsa2_swr_clk,
+                wsa2_swr_data, i2s2_data, i2s3_clk, i2s3_ws, i2s3_data,
+                ext_mclk1_c, ext_mclk1_b, ext_mclk1_a ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          0: No adjustments
+          1: Higher Slew rate (faster edges)
+          2: Lower Slew rate (slower edges)
+          3: Reserved (No adjustments)
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    pinctrl@33c0000 {
+        compatible = "qcom,sc8280xp-lpass-lpi-pinctrl";
+        reg = <0x33c0000 0x20000>,
+              <0x3550000 0x10000>;
+        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpi_tlmm 0 0 18>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
new file mode 100644
index 000000000000..b9ab130cd558
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC8280XP TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SC8280XP platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
+        additionalProperties: false
+
+'$defs':
+  qcom-sc8280xp-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset, ufs1_reset ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, atest_usb, audio_ref, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9,
+                cmu_rng, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist,
+                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5,
+                ddr_pxi6, ddr_pxi7, dp2_hot, dp3_hot, edp0_lcd, edp1_lcd,
+                edp2_lcd, edp3_lcd, edp_hot, emac0_dll, emac0_mcg0, emac0_mcg1,
+                emac0_mcg2, emac0_mcg3, emac0_phy, emac0_ptp, emac1_dll0,
+                emac1_dll1, emac1_mcg0, emac1_mcg1, emac1_mcg2, emac1_mcg3,
+                emac1_phy, emac1_ptp, gcc_gp1, gcc_gp2, gcc_gp3, gcc_gp4,
+                gcc_gp5, gpio, hs1_mi2s, hs2_mi2s, hs3_mi2s, ibi_i3c,
+                jitter_bist, lpass_slimbus, mdp0_vsync0, mdp0_vsync1,
+                mdp0_vsync2, mdp0_vsync3, mdp0_vsync4, mdp0_vsync5,
+                mdp0_vsync6, mdp0_vsync7, mdp0_vsync8, mdp1_vsync0,
+                mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4,
+                mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, mdp1_vsync8, mdp_vsync,
+                mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s1_data0,
+                mi2s1_data1, mi2s1_sck, mi2s1_ws, mi2s2_data0, mi2s2_data1,
+                mi2s2_sck, mi2s2_ws, mi2s_mclk1, mi2s_mclk2, pcie2a_clkreq,
+                pcie2b_clkreq, pcie3a_clkreq, pcie3b_clkreq, pcie4_clkreq,
+                phase_flag, pll_bist, pll_clk, prng_rosc0, prng_rosc1,
+                prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, qspi, qspi_clk,
+                qspi_cs, qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
+                qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
+                qup18, qup19, qup20, qup21, qup22, qup23, rgmii_0, rgmii_1,
+                sd_write, sdc40, sdc42, sdc43, sdc4_clk, sdc4_cmd, tb_trig,
+                tgu, tsense_pwm1, tsense_pwm2, tsense_pwm3, tsense_pwm4,
+                usb0_dp, usb0_phy, usb0_sbrx, usb0_sbtx, usb0_usb4, usb1_dp,
+                usb1_phy, usb1_sbrx, usb1_sbtx, usb1_usb4, usb2phy_ac,
+                vsense_trigger ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$"
+        then:
+          required:
+            - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sc8280xp-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 230>;
+
+        gpio-wo-subnode-state {
+                pins = "gpio1";
+                function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "qup14";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "qup14";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
new file mode 100644
index 000000000000..a38090b14aab
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx55-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX55 TLMM block
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SDX55 platform.
+
+properties:
+  compatible:
+    const: qcom,sdx55-pinctrl
+
+  reg:
+    description: Specifies the base address and size of the TLMM register space
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ adsp_ext, atest, audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1,
+                blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_spi1, blsp_spi2,
+                blsp_spi3, blsp_spi4, blsp_uart1, blsp_uart2, blsp_uart3,
+                blsp_uart4, char_exec, coex_uart, coex_uart2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+                ebi0_wrcdc, ebi2_a, ebi2_lcd, emac_gcc0, emac_gcc1,
+                emac_pps0, emac_pps1, ext_dbg, gcc_gp1, gcc_gp2, gcc_gp3,
+                gcc_plltest, gpio, i2s_mclk, jitter_bist, ldo_en, ldo_update,
+                mgpi_clk, m_voc, native_char, native_char0, native_char1,
+                native_char2, native_char3, native_tsens, native_tsense,
+                nav_gpio, pa_indicator, pcie_clkreq, pci_e, pll_bist, pll_ref,
+                pll_test, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
+                qdss_gpio0, qdss_gpio1, qdss_gpio2, qdss_gpio3, qdss_gpio4,
+                qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9,
+                qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13,
+                qdss_gpio14, qdss_gpio15, qdss_stm0, qdss_stm1, qdss_stm2,
+                qdss_stm3, qdss_stm4, qdss_stm5, qdss_stm6, qdss_stm7,
+                qdss_stm8, qdss_stm9, qdss_stm10, qdss_stm11, qdss_stm12,
+                qdss_stm13, qdss_stm14, qdss_stm15, qdss_stm16, qdss_stm17,
+                qdss_stm18, qdss_stm19, qdss_stm20, qdss_stm21, qdss_stm22,
+                qdss_stm23, qdss_stm24, qdss_stm25, qdss_stm26, qdss_stm27,
+                qdss_stm28, qdss_stm29, qdss_stm30, qdss_stm31, qlink0_en,
+                qlink0_req, qlink0_wmss, qlink1_en, qlink1_req, qlink1_wmss,
+                spmi_coex, sec_mi2s, spmi_vgi, tgu_ch0, uim1_clk, uim1_data,
+                uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
+                uim2_reset, usb2phy_ac, vsense_trigger ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        tlmm: pinctrl@1f00000 {
+                compatible = "qcom,sdx55-pinctrl";
+                reg = <0x0f100000 0x300000>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 108>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+
+                serial-pins {
+                        pins = "gpio8", "gpio9";
+                        function = "blsp_uart3";
+                        drive-strength = <8>;
+                        bias-disable;
+                };
+        };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
new file mode 100644
index 000000000000..cdfcf29dffee
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX65 TLMM block
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description:
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SDX65 platform.
+
+properties:
+  compatible:
+    const: qcom,sdx65-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx65-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-sdx65-tlmm-state"
+'$defs':
+  qcom-sdx65-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$"
+            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ]
+        minItems: 1
+        maxItems: 150
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
+                bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
+                qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
+                dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
+                blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
+                mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
+                atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
+                cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
+                pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
+                qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
+                qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
+                atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
+                atest_usb20, atest_char0, dac_calib10, qdss_stm10,
+                qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
+                blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
+                qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
+                qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
+                dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
+                qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
+                dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
+                dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
+                dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
+                dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
+                sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
+                qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
+                uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
+                blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
+                qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
+                blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
+                cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
+                blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
+                qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
+                isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
+                qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
+                sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
+                gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
+                qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
+                tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
+                qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
+                sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
+                sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
+                ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
+                blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
+                pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
+                qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
+                qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
+                gpio ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sdx65-tlmm";
+        reg = <0x03000000 0xdc2000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 109>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx {
+                pins = "gpio4";
+                function = "blsp_uart1";
+                bias-pull-up;
+            };
+
+            tx {
+                pins = "gpio5";
+                function = "blsp_uart1";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
new file mode 100644
index 000000000000..e39fbb36d8c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block
+
+maintainers:
+  - Iskren Chernev <iskren.chernev@gmail.com>
+
+description:
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SM4250/6115 platforms.
+
+properties:
+  compatible:
+    const: qcom,sm6115-tlmm
+
+  reg:
+    minItems: 3
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: west
+      - const: south
+      - const: east
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges: true
+
+  wakeup-parent: true
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6115-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm6115-tlmm-state"
+        additionalProperties: false
+
+'$defs':
+  qcom-sm6115-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
+                      sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c,
+                cci_timer, cri_trng, dac_calib, dbg_out, ddr_bist, ddr_pxi0,
+                ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+                gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx, jitter_bist,
+                mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1, mpm_pwr, mss_lte,
+                m_voc, nav_gpio, pa_indicator, pbs, pbs_out, phase_flag,
+                pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti,
+                qdss_gpio, qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb,
+                sdc2_tb, sd_write, ssbi_wtr1, tgu, tsense_pwm, uim1_clk,
+                uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+                uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger,
+                wlan1_adc0, elan1_adc1 ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
+        then:
+          required:
+            - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@500000 {
+        compatible = "qcom,sm6115-tlmm";
+        reg = <0x500000 0x400000>,
+              <0x900000 0x400000>,
+              <0xd00000 0x400000>;
+        reg-names = "west", "south", "east";
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 114>;
+
+        sdc2_on_state: sdc2-on-state {
+            clk-pins {
+                pins = "sdc2_clk";
+                bias-disable;
+                drive-strength = <16>;
+            };
+
+            cmd-pins {
+                pins = "sdc2_cmd";
+                bias-pull-up;
+                drive-strength = <10>;
+            };
+
+            data-pins {
+                pins = "sdc2_data";
+                bias-pull-up;
+                drive-strength = <10>;
+            };
+
+            sd-cd-pins {
+                pins = "gpio88";
+                function = "gpio";
+                bias-pull-up;
+                drive-strength = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
new file mode 100644
index 000000000000..5cb8b272cb7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Qualcomm Technologies, Inc. SM6125 TLMM block
+
+maintainers:
+  - Martin Botka <martin.botka@somainline.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM6125 platform.
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6125-tlmm
+
+  reg:
+    minItems: 3
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: "west"
+      - const: "south"
+      - const: "east"
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6125-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm6125-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm6125-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+                atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1,
+                atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2,
+                atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb,
+                audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
+                cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk,
+                dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+                gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en,
+                ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1,
+                mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte,
+                nav_pps, pa_indicator, phase_flag, pll_bist, pll_bypassnl, pll_reset,
+                pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, qdss_cti, qdss, qlink_enable,
+                qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, qup02, qup03, qup04,
+                qup10, qup11, qup12, qup13, qup14, sd_write, sec_mi2s, sp_cmu, swr_rx,
+                swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm,
+                uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+                uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger,
+                wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
+
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"
+        then:
+          required:
+            - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@500000 {
+        compatible = "qcom,sm6125-tlmm";
+        reg = <0x00500000 0x400000>,
+              <0x00900000 0x400000>,
+              <0x00d00000 0x400000>;
+        reg-names = "west", "south", "east";
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 134>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        sdc2-off-state {
+            clk-pins {
+                pins = "sdc2_clk";
+                drive-strength = <2>;
+                bias-disable;
+            };
+
+            cmd-pins {
+                pins = "sdc2_cmd";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+
+            data-pins {
+                pins = "sdc2_data";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
new file mode 100644
index 000000000000..856b9c567ecb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6350 TLMM block
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM6350 platform.
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6350-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6350-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm6350-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm6350-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, atest_char2,
+                atest_char3, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
+                atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, atest_usb22,
+                atest_usb23, audio_ref, btfm_slimbus, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
+                cam_mclk4, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3,
+                dp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
+                gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext, m_voc, mclk,
+                mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, mi2s_2,
+                mss_lte, nav_gpio, nav_pps, pa_indicator, pcie0_clk, phase_flag0, phase_flag1,
+                phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
+                phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
+                phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
+                phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
+                phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9,
+                pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti, qdss_gpio, qdss_gpio0,
+                qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
+                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
+                qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss,
+                qlink1_enable, qlink1_request, qlink1_wmss, qup00, qup01, qup02, qup10, qup11,
+                qup12, qup13_f1, qup13_f2, qup14, rffe0_clk, rffe0_data, rffe1_clk, rffe1_data,
+                rffe2_clk, rffe2_data, rffe3_clk, rffe3_data, rffe4_clk, rffe4_data, sd_write,
+                sdc1_tb, sdc2_tb, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+                tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+                uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+                wlan2_adc0, wlan2_adc1, ]
+
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$"
+        then:
+          required:
+            - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm6350-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 157>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio25";
+                function = "qup13_f2";
+                bias-disable;
+            };
+
+            tx-pins {
+                pins = "gpio26";
+                function = "qup13_f2";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
new file mode 100644
index 000000000000..025faf87d147
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6375-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6375 TLMM block
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM6375 platform.
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6375-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm6375-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm6375-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-6])$"
+            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+                      sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+                atest_char2, atest_char3, atest_tsens, atest_tsens2,
+                atest_usb1, atest_usb10, atest_usb11, atest_usb12,
+                atest_usb13, atest_usb2, atest_usb20, atest_usb21,
+                atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk,
+                cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2,
+                cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist,
+                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd,
+                gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
+                gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext,
+                m_voc, mclk, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+                mdp_vsync3, mi2s_0, mi2s_1, mi2s_2, mss_lte, nav_gpio,
+                nav_pps, pa_indicator, phase_flag0, phase_flag1, phase_flag10,
+                phase_flag11, phase_flag12, phase_flag13, phase_flag14,
+                phase_flag15, phase_flag16, phase_flag17, phase_flag18,
+                phase_flag19, phase_flag2, phase_flag20, phase_flag21,
+                phase_flag22, phase_flag23, phase_flag24, phase_flag25,
+                phase_flag26, phase_flag27, phase_flag28, phase_flag29,
+                phase_flag3, phase_flag30, phase_flag31, phase_flag4,
+                phase_flag5, phase_flag6, phase_flag7, phase_flag8,
+                phase_flag9, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+                qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
+                qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15,
+                qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
+                qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
+                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+                qlink1_wmss, qup00, qup01, qup02, qup10, qup11_f1, qup11_f2,
+                qup12, qup13_f1, qup13_f2, qup14, sd_write, sdc1_tb, sdc2_tb,
+                sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+                tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset,
+                uim2_clk, uim2_data, uim2_present, uim2_reset, usb2phy_ac,
+                usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+                wlan2_adc0, wlan2_adc1 ]
+
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-6])$"
+        then:
+          required:
+            - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@500000 {
+        compatible = "qcom,sm6375-tlmm";
+        reg = <0x00500000 0x800000>;
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 157>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio18";
+                function = "qup13_f2";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio19";
+                function = "qup13_f2";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
new file mode 100644
index 000000000000..06efb1382876
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
+  Low Power Island (LPI) TLMM block
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  LPASS LPI IP on most Qualcomm SoCs
+
+properties:
+  compatible:
+    const: qcom,sm8250-lpass-lpi-pinctrl
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9])$"
+        minItems: 1
+        maxItems: 14
+
+      function:
+        enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
+                qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
+                dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
+                i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
+                dmic3_data, i2s2_data ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+            0: No adjustments
+            1: Higher Slew rate (faster edges)
+            2: Lower Slew rate (slower edges)
+            3: Reserved (No adjustments)
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    lpi_tlmm: pinctrl@33c0000 {
+        compatible = "qcom,sm8250-lpass-lpi-pinctrl";
+        reg = <0x33c0000 0x20000>,
+              <0x3550000 0x10000>;
+        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpi_tlmm 0 0 14>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
new file mode 100644
index 000000000000..c44d02d28bc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8250 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SM8250 platform.
+
+properties:
+  compatible:
+    const: qcom,sm8250-pinctrl
+
+  reg:
+    minItems: 3
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: "west"
+      - const: "south"
+      - const: "north"
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  wakeup-parent: true
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '^.*$':
+    if:
+      type: object
+    then:
+      properties:
+        pins:
+          description:
+            List of gpio pins affected by the properties specified in this
+            subnode.
+          items:
+            oneOf:
+              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+              - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+          minItems: 1
+          maxItems: 36
+
+        function:
+          description:
+            Specify the alternative function to be configured for the specified
+            pins.
+
+          enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
+                  cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+                  cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                  ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+                  ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+                  mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+                  mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+                  mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
+                  pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+                  pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
+                  qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
+                  qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
+                  qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
+                  sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
+                  tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
+                  tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
+                  tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
+
+        drive-strength:
+          enum: [2, 4, 6, 8, 10, 12, 14, 16]
+          default: 2
+          description:
+            Selects the drive strength for the specified pins, in mA.
+
+        bias-pull-down: true
+
+        bias-pull-up: true
+
+        bias-disable: true
+
+        output-high: true
+
+        output-low: true
+
+      required:
+        - pins
+
+      allOf:
+        - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+        - if:
+            properties:
+              pins:
+                pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+          then:
+            required:
+              - function
+
+      additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@1f00000 {
+            compatible = "qcom,sm8250-pinctrl";
+            reg = <0x0f100000 0x300000>,
+                  <0x0f500000 0x300000>,
+                  <0x0f900000 0x300000>;
+            reg-names = "west", "south", "north";
+            interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            gpio-ranges = <&tlmm 0 0 180>;
+            wakeup-parent = <&pdc>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
new file mode 100644
index 000000000000..6ae5571f60da
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8350 TLMM block
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM8350 platform.
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8350-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8350-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8350-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8350-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
+                cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+                gpio, ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+                mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+                mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck,
+                mi2s1_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
+                mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
+                mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
+                mss_grfc7, mss_grfc8, mss_grfc9, nav_gpio, pa_indicator,
+                pcie0_clkreqn, pcie1_clkreqn, phase_flag, pll_bist, pll_clk,
+                pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qlink0_enable,
+                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+                qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0,
+                qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10,
+                qup11, qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19,
+                qup2, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5,
+                qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
+                sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
+                tgu_ch3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data,
+                uim0_present, uim0_reset, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$"
+        then:
+          required:
+            - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm8350-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 203>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio18";
+                function = "qup3";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio19";
+                function = "qup3";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
new file mode 100644
index 000000000000..3694795ec793
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
+  Low Power Island (LPI) TLMM block
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  LPASS LPI IP on most Qualcomm SoCs
+
+properties:
+  compatible:
+    const: qcom,sm8450-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+      - description: LPASS LPI pins SLEW registers
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-2][0-9]])$"
+
+      function:
+        enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
+                dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic4_clk,
+                dmic4_data, i2s2_clk, i2s2_ws, dmic3_clk, dmic3_data,
+                qua_mi2s_sclk, qua_mi2s_ws, qua_mi2s_data, i2s1_clk, i2s1_ws,
+                i2s1_data, wsa_swr_clk, wsa_swr_data, wsa2_swr_clk,
+                wsa2_swr_data, i2s2_data, i2s4_ws, i2s4_clk, i2s4_data,
+                slimbus_clk, i2s3_clk, i2s3_ws, i2s3_data, slimbus_data,
+                ext_mclk1_c, ext_mclk1_b, ext_mclk1_a, ext_mclk1_d,
+                ext_mclk1_e ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          0: No adjustments
+          1: Higher Slew rate (faster edges)
+          2: Lower Slew rate (slower edges)
+          3: Reserved (No adjustments)
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    pinctrl@3440000 {
+        compatible = "qcom,sm8450-lpass-lpi-pinctrl";
+        reg = <0x3440000 0x20000>,
+              <0x34d0000 0x10000>;
+        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpi_tlmm 0 0 23>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
new file mode 100644
index 000000000000..9cd97a467648
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8450 TLMM block
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM8450 platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8450-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 105
+
+  gpio-line-names:
+    maxItems: 209
+
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8450-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8450-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8450-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ aon_cam, atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
+                cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, gcc_gp2, gcc_gp3,
+                gpio, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1,
+                mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck,
+                mi2s0_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
+                mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
+                mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
+                mss_grfc7, mss_grfc8, mss_grfc9, nav, pcie0_clkreqn,
+                pcie1_clkreqn, phase_flag, pll_bist, pll_clk, pri_mi2s,
+                prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, qlink0_request,
+                qlink0_wmss, qlink1_enable, qlink1_request, qlink1_wmss,
+                qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
+                qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11,
+                qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19, qup2,
+                qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4,
+                qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
+                sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
+                tgu_ch3, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
+                tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
+                uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset,
+                usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+        then:
+          required:
+            - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm8450-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 211>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio26";
+                function = "qup7";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio27";
+                function = "qup7";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
new file mode 100644
index 000000000000..c88c8dcb69d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,tlmm-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Top Level Mode Multiplexer (TLMM) definitions
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This defines the common properties used to describe all Qualcomm Top Level
+  Mode Multiplexer bindings and pinconf/pinmux states for these.
+
+properties:
+  interrupts:
+    description:
+      Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  wakeup-parent:
+    description:
+      Specifying the interrupt-controller used to wake up the system when the
+      TLMM block has been powered down.
+
+  gpio-reserved-ranges:
+    description:
+      Pins can be reserved for trusted applications and thereby unaccessible
+      from the OS.  This property can be used to mark the pins which resources
+      should not be accessed by the OS. Please see the ../gpio/gpio.txt for more
+      information.
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: true
+
+$defs:
+  qcom-tlmm-state:
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+    properties:
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
new file mode 100644
index 000000000000..6f17f3991640
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink MT7620 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+  Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,mt7620-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description: The pin group to select.
+            enum: [
+              # common
+              i2c, spi, wdt,
+
+              # For MT7620 SoC
+              ephy, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi refclk,
+              uartf, uartlite, wled,
+
+              # For MT7628 and MT7688 SoCs
+              gpio, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
+              p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0,
+              pwm1, refclk, sdmode, spi cs1, spis, uart0, uart1, uart2,
+              wled_an, wled_kn,
+            ]
+
+          function:
+            description: The mux function to select.
+            enum: [
+              # common
+              gpio, i2c, refclk, spi,
+
+              # For MT7620 SoC
+              ephy, gpio i2s, gpio uartf, i2s uartf, mdio, nand, pa,
+              pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf,
+              rgmii1, rgmii2, sd, spi refclk, uartf, uartlite, wdt refclk,
+              wdt rst, wled,
+
+              # For MT7628 and MT7688 SoCs
+              antenna, debug, i2s, jtag, p0led_an, p0led_kn,
+              p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn,
+              p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2,
+              rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi cs1,
+              spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -,
+            ]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    pinctrl {
+      compatible = "ralink,mt7620-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
new file mode 100644
index 000000000000..61e5c847e8c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,mt7621-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink MT7621 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+  Ralink MT7621 pin controller for MT7621 SoC.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,mt7621-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description: The pin group to select.
+            enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi, uart1,
+                   uart2, uart3, wdt]
+
+          function:
+            description: The mux function to select.
+            enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
+                   pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3, spi,
+                   uart1, uart2, uart3, wdt refclk, wdt rst]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    pinctrl {
+      compatible = "ralink,mt7621-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
new file mode 100644
index 000000000000..56e5becabcfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT2880 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+  Ralink RT2880 pin controller for RT2880 SoC.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,rt2880-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description: The pin group to select.
+            enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
+
+          function:
+            description: The mux function to select.
+            enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    pinctrl {
+      compatible = "ralink,rt2880-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
new file mode 100644
index 000000000000..f602a5d6e13a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt305x-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT305X Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+  Ralink RT305X pin controller for RT3050, RT3052, RT3350, RT3352 and RT5350
+  SoCs.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,rt305x-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description: The pin group to select.
+            enum: [
+              # common
+              i2c, jtag, led, mdio, rgmii, spi, spi_cs1, uartf, uartlite,
+
+              # For RT3050, RT3052 and RT3350 SoCs
+              sdram,
+
+              # For RT3352 SoC
+              lna, pa
+            ]
+
+          function:
+            description: The mux function to select.
+            enum: [
+              # common
+              gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, mdio,
+              pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf,
+              uartlite, wdg_cs1,
+
+              # For RT3050, RT3052 and RT3350 SoCs
+              sdram,
+
+              # For RT3352 SoC
+              lna, pa
+            ]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    pinctrl {
+      compatible = "ralink,rt305x-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
new file mode 100644
index 000000000000..feb6e66dcb61
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt3883-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT3883 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+  Ralink RT3883 pin controller for RT3883 SoC.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,rt3883-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description: The pin group to select.
+            enum: [ge1, ge2, i2c, jtag, lna a, lna g, mdio, pci, spi, uartf,
+                   uartlite]
+
+          function:
+            description: The mux function to select.
+            enum: [ge1, ge2, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag,
+                   lna a, lna g, mdio, pci-dev, pci-fnc, pci-host1, pci-host2,
+                   pcm gpio, pcm i2s, pcm uartf, spi, uartf, uartlite]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    pinctrl {
+      compatible = "ralink,rt3883-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
deleted file mode 100644
index 6eada23eaa31..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ /dev/null
@@ -1,186 +0,0 @@
-* Renesas Pin Function Controller (GPIO and Pin Mux/Config)
-
-The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH73A0,
-R8A73A4 and R8A7740 it also acts as a GPIO controller.
-
-
-Pin Control
------------
-
-Required Properties:
-
-  - compatible: should be one of the following.
-    - "renesas,pfc-emev2": for EMEV2 (EMMA Mobile EV2) compatible pin-controller.
-    - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller.
-    - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
-    - "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller.
-    - "renesas,pfc-r8a7744": for R8A7744 (RZ/G1N) compatible pin-controller.
-    - "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller.
-    - "renesas,pfc-r8a77470": for R8A77470 (RZ/G1C) compatible pin-controller.
-    - "renesas,pfc-r8a774a1": for R8A774A1 (RZ/G2M) compatible pin-controller.
-    - "renesas,pfc-r8a774b1": for R8A774B1 (RZ/G2N) compatible pin-controller.
-    - "renesas,pfc-r8a774c0": for R8A774C0 (RZ/G2E) compatible pin-controller.
-    - "renesas,pfc-r8a7778": for R8A7778 (R-Car M1) compatible pin-controller.
-    - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
-    - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
-    - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2-W) compatible pin-controller.
-    - "renesas,pfc-r8a7792": for R8A7792 (R-Car V2H) compatible pin-controller.
-    - "renesas,pfc-r8a7793": for R8A7793 (R-Car M2-N) compatible pin-controller.
-    - "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller.
-    - "renesas,pfc-r8a7795": for R8A7795 (R-Car H3) compatible pin-controller.
-    - "renesas,pfc-r8a7796": for R8A77960 (R-Car M3-W) compatible pin-controller.
-    - "renesas,pfc-r8a77961": for R8A77961 (R-Car M3-W+) compatible pin-controller.
-    - "renesas,pfc-r8a77965": for R8A77965 (R-Car M3-N) compatible pin-controller.
-    - "renesas,pfc-r8a77970": for R8A77970 (R-Car V3M) compatible pin-controller.
-    - "renesas,pfc-r8a77980": for R8A77980 (R-Car V3H) compatible pin-controller.
-    - "renesas,pfc-r8a77990": for R8A77990 (R-Car E3) compatible pin-controller.
-    - "renesas,pfc-r8a77995": for R8A77995 (R-Car D3) compatible pin-controller.
-    - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
-
-  - reg: Base address and length of each memory resource used by the pin
-    controller hardware module.
-
-Optional properties:
-
-  - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden
-    otherwise. Should be 3.
-
-  - interrupts-extended: Specify the interrupts associated with external
-    IRQ pins. This property is mandatory when the PFC handles GPIOs and
-    forbidden otherwise. When specified, it must contain one interrupt per
-    external IRQ, sorted by external IRQ number.
-
-The PFC node also acts as a container for pin configuration nodes. Please refer
-to pinctrl-bindings.txt in this directory for the definition of the term "pin
-configuration node" and for the common pinctrl bindings used by client devices.
-
-Each pin configuration node represents a desired configuration for a pin, a
-pin group, or a list of pins or pin groups. The configuration can include the
-function to select on those pin(s) and pin configuration parameters (such as
-pull-up and pull-down).
-
-Pin configuration nodes contain pin configuration properties, either directly
-or grouped in child subnodes. Both pin muxing and configuration parameters can
-be grouped in that way and referenced as a single pin configuration node by
-client devices.
-
-A configuration node or subnode must reference at least one pin (through the
-pins or pin groups properties) and contain at least a function or one
-configuration parameter. When the function is present only pin groups can be
-used to reference pins.
-
-All pin configuration nodes and subnodes names are ignored. All of those nodes
-are parsed through phandles and processed purely based on their content.
-
-Pin Configuration Node Properties:
-
-- pins : An array of strings, each string containing the name of a pin.
-- groups : An array of strings, each string containing the name of a pin
-  group.
-
-- function: A string containing the name of the function to mux to the pin
-  group(s) specified by the groups property.
-
-  Valid values for pin, group and function names can be found in the group and
-  function arrays of the PFC data file corresponding to the SoC
-  (drivers/pinctrl/sh-pfc/pfc-*.c)
-
-The pin configuration parameters use the generic pinconf bindings defined in
-pinctrl-bindings.txt in this directory. The supported parameters are
-bias-disable, bias-pull-up, bias-pull-down, drive-strength and power-source. For
-pins that have a configurable I/O voltage, the power-source value should be the
-nominal I/O voltage in millivolts.
-
-
-GPIO
-----
-
-On SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO controller node.
-
-Required Properties:
-
-  - gpio-controller: Marks the device node as a gpio controller.
-
-  - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
-    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
-    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
-
-The syntax of the gpio specifier used by client nodes should be the following
-with values derived from the SoC user manual.
-
-  <[phandle of the gpio controller node]
-   [pin number within the gpio controller]
-   [flags]>
-
-On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver.
-Please refer to Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
-for documentation of the GPIO device tree bindings on those platforms.
-
-
-Examples
---------
-
-Example 1: SH73A0 (SH-Mobile AG5) pin controller node
-
-	pfc: pin-controller@e6050000 {
-		compatible = "renesas,pfc-sh73a0";
-		reg = <0xe6050000 0x8000>,
-		      <0xe605801c 0x1c>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupts-extended =
-			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
-			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
-			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
-			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
-			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
-			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
-			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
-			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
-	};
-
-Example 2: A GPIO LED node that references a GPIO
-
-	#include <dt-bindings/gpio/gpio.h>
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps
-           for the MMCIF and SCIFA4 devices
-
-	&pfc {
-		pinctrl-0 = <&scifa4_pins>;
-		pinctrl-names = "default";
-
-		mmcif_pins: mmcif {
-			mux {
-				groups = "mmc0_data8_0", "mmc0_ctrl_0";
-				function = "mmc0";
-			};
-			cfg {
-				groups = "mmc0_data8_0";
-				pins = "PORT279";
-				bias-pull-up;
-			};
-		};
-
-		scifa4_pins: scifa4 {
-			groups = "scifa4_data", "scifa4_ctrl";
-			function = "scifa4";
-		};
-	};
-
-Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device
-
-	&mmcif {
-		pinctrl-0 = <&mmcif_pins>;
-		pinctrl-names = "default";
-
-		bus-width = <8>;
-		vmmc-supply = <&reg_1p8v>;
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
new file mode 100644
index 000000000000..4fc758fea7e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,pfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Pin Function Controller (GPIO and Pin Mux/Config)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Pin Function Controller (PFC) is a Pin Mux/Config controller.
+  On SH/R-Mobile SoCs it also acts as a GPIO controller.
+
+properties:
+  compatible:
+    enum:
+      - renesas,pfc-emev2       # EMMA Mobile EV2
+      - renesas,pfc-r8a73a4     # R-Mobile APE6
+      - renesas,pfc-r8a7740     # R-Mobile A1
+      - renesas,pfc-r8a7742     # RZ/G1H
+      - renesas,pfc-r8a7743     # RZ/G1M
+      - renesas,pfc-r8a7744     # RZ/G1N
+      - renesas,pfc-r8a7745     # RZ/G1E
+      - renesas,pfc-r8a77470    # RZ/G1C
+      - renesas,pfc-r8a774a1    # RZ/G2M
+      - renesas,pfc-r8a774b1    # RZ/G2N
+      - renesas,pfc-r8a774c0    # RZ/G2E
+      - renesas,pfc-r8a774e1    # RZ/G2H
+      - renesas,pfc-r8a7778     # R-Car M1
+      - renesas,pfc-r8a7779     # R-Car H1
+      - renesas,pfc-r8a7790     # R-Car H2
+      - renesas,pfc-r8a7791     # R-Car M2-W
+      - renesas,pfc-r8a7792     # R-Car V2H
+      - renesas,pfc-r8a7793     # R-Car M2-N
+      - renesas,pfc-r8a7794     # R-Car E2
+      - renesas,pfc-r8a7795     # R-Car H3
+      - renesas,pfc-r8a7796     # R-Car M3-W
+      - renesas,pfc-r8a77961    # R-Car M3-W+
+      - renesas,pfc-r8a77965    # R-Car M3-N
+      - renesas,pfc-r8a77970    # R-Car V3M
+      - renesas,pfc-r8a77980    # R-Car V3H
+      - renesas,pfc-r8a77990    # R-Car E3
+      - renesas,pfc-r8a77995    # R-Car D3
+      - renesas,pfc-r8a779a0    # R-Car V3U
+      - renesas,pfc-r8a779f0    # R-Car S4-8
+      - renesas,pfc-r8a779g0    # R-Car V4H
+      - renesas,pfc-sh73a0      # SH-Mobile AG5
+
+  reg:
+    minItems: 1
+    maxItems: 10
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 16
+
+  interrupts-extended:
+    minItems: 32
+    maxItems: 64
+    description:
+      Specify the interrupts associated with external IRQ pins on SoCs where
+      the PFC acts as a GPIO controller.  It must contain one interrupt per
+      external IRQ, sorted by external IRQ number.
+
+  power-domains:
+    maxItems: 1
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      enum:
+        - renesas,pfc-r8a73a4
+        - renesas,pfc-r8a7740
+        - renesas,pfc-sh73a0
+then:
+  required:
+    - interrupts-extended
+    - gpio-controller
+    - '#gpio-cells'
+    - gpio-ranges
+    - power-domains
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        phandle: true
+        function: true
+        groups: true
+        pins: true
+        bias-disable: true
+        bias-pull-down: true
+        bias-pull-up: true
+        drive-strength:
+          enum: [ 3, 6, 9, 12, 15, 18, 21, 24 ] # Superset of supported values
+        power-source:
+          enum: [ 1800, 3300 ]
+        gpio-hog: true
+        gpios: true
+        input: true
+        output-high: true
+        output-low: true
+
+      additionalProperties: false
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+  - |
+    pfc: pinctrl@e6050000 {
+            compatible = "renesas,pfc-r8a7740";
+            reg = <0xe6050000 0x8000>,
+                  <0xe605800c 0x20>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pfc 0 0 212>;
+            interrupts-extended =
+                <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+                <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+                <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+                <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+                <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+                <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+                <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+                <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+            power-domains = <&pd_c5>;
+
+            lcd0-mux-hog {
+                    /* DBGMD/LCDC0/FSIA MUX */
+                    gpio-hog;
+                    gpios = <176 0>;
+                    output-high;
+            };
+    };
+
+  - |
+    pinctrl@e6060000 {
+            compatible = "renesas,pfc-r8a7795";
+            reg = <0xe6060000 0x50c>;
+
+            avb_pins: avb {
+                    mux {
+                            groups = "avb_link", "avb_mdio", "avb_mii";
+                            function = "avb";
+                    };
+
+                    pins_mdio {
+                            groups = "avb_mdio";
+                            drive-strength = <24>;
+                    };
+
+                    pins_mii_tx {
+                            pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC",
+                                   "PIN_AVB_TD0", "PIN_AVB_TD1", "PIN_AVB_TD2",
+                                   "PIN_AVB_TD3";
+                            drive-strength = <12>;
+                    };
+            };
+
+            keys_pins: keys {
+                    pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1";
+                    bias-pull-up;
+            };
+
+            sdhi0_pins: sd0 {
+                    groups = "sdhi0_data4", "sdhi0_ctrl";
+                    function = "sdhi0";
+                    power-source = <3300>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt
deleted file mode 100644
index fd3696eb36bf..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt
+++ /dev/null
@@ -1,223 +0,0 @@
-Renesas RZ/A1 combined Pin and GPIO controller
-
-The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO controller,
-named "Ports" in the hardware reference manual.
-Pin multiplexing and GPIO configuration is performed on a per-pin basis
-writing configuration values to per-port register sets.
-Each "port" features up to 16 pins, each of them configurable for GPIO
-function (port mode) or in alternate function mode.
-Up to 8 different alternate function modes exist for each single pin.
-
-Pin controller node
--------------------
-
-Required properties:
-  - compatible: should be:
-    - "renesas,r7s72100-ports": for RZ/A1H
-    - "renesas,r7s72101-ports", "renesas,r7s72100-ports": for RZ/A1M
-    - "renesas,r7s72102-ports": for RZ/A1L
-
-  - reg
-    address base and length of the memory area where the pin controller
-    hardware is mapped to.
-
-Example:
-Pin controller node for RZ/A1H SoC (r7s72100)
-
-pinctrl: pin-controller@fcfe3000 {
-	compatible = "renesas,r7s72100-ports";
-
-	reg = <0xfcfe3000 0x4230>;
-};
-
-Sub-nodes
----------
-
-The child nodes of the pin controller node describe a pin multiplexing
-function or a GPIO controller alternatively.
-
-- Pin multiplexing sub-nodes:
-  A pin multiplexing sub-node describes how to configure a set of
-  (or a single) pin in some desired alternate function mode.
-  A single sub-node may define several pin configurations.
-  A few alternate function require special pin configuration flags to be
-  supplied along with the alternate function configuration number.
-  The hardware reference manual specifies when a pin function requires
-  "software IO driven" mode to be specified. To do so use the generic
-  properties from the <include/linux/pinctrl/pinconf_generic.h> header file
-  to instruct the pin controller to perform the desired pin configuration
-  operation.
-  Please refer to pinctrl-bindings.txt to get to know more on generic
-  pin properties usage.
-
-  The allowed generic formats for a pin multiplexing sub-node are the
-  following ones:
-
-  node-1 {
-      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-      GENERIC_PINCONFIG;
-  };
-
-  node-2 {
-      sub-node-1 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      sub-node-2 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      ...
-
-      sub-node-n {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-  };
-
-  Use the second format when pins part of the same logical group need to have
-  different generic pin configuration flags applied.
-
-  Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle
-  of the most external one.
-
-  Eg.
-
-  client-1 {
-      ...
-      pinctrl-0 = <&node-1>;
-      ...
-  };
-
-  client-2 {
-      ...
-      pinctrl-0 = <&node-2>;
-      ...
-  };
-
-  Required properties:
-    - pinmux:
-      integer array representing pin number and pin multiplexing configuration.
-      When a pin has to be configured in alternate function mode, use this
-      property to identify the pin by its global index, and provide its
-      alternate function configuration number along with it.
-      When multiple pins are required to be configured as part of the same
-      alternate function they shall be specified as members of the same
-      argument list of a single "pinmux" property.
-      Helper macros to ease assembling the pin index from its position
-      (port where it sits on and pin number) and alternate function identifier
-      are provided by the pin controller header file at:
-      <include/dt-bindings/pinctrl/r7s72100-pinctrl.h>
-      Integers values in "pinmux" argument list are assembled as:
-      ((PORT * 16 + PIN) | MUX_FUNC << 16)
-
-  Optional generic properties:
-    - input-enable:
-      enable input bufer for pins requiring software driven IO input
-      operations.
-    - output-high:
-      enable output buffer for pins requiring software driven IO output
-      operations. output-low can be used alternatively, as line value is
-      ignored by the driver.
-
-  The hardware reference manual specifies when a pin has to be configured to
-  work in bi-directional mode and when the IO direction has to be specified
-  by software. Bi-directional pins are managed by the pin controller driver
-  internally, while software driven IO direction has to be explicitly
-  selected when multiple options are available.
-
-  Example:
-  A serial communication interface with a TX output pin and an RX input pin.
-
-  &pinctrl {
-	scif2_pins: serial2 {
-		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
-	};
-  };
-
-  Pin #0 on port #3 is configured as alternate function #6.
-  Pin #2 on port #3 is configured as alternate function #4.
-
-  Example 2:
-  I2c master: both SDA and SCL pins need bi-directional operations
-
-  &pinctrl {
-	i2c2_pins: i2c2 {
-		pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
-	};
-  };
-
-  Pin #4 on port #1 is configured as alternate function #1.
-  Pin #5 on port #1 is configured as alternate function #1.
-  Both need to work in bi-directional mode, the driver manages this internally.
-
-  Example 3:
-  Multi-function timer input and output compare pins.
-  Configure TIOC0A as software driven input and TIOC0B as software driven
-  output.
-
-  &pinctrl {
-	tioc0_pins: tioc0 {
-		tioc0_input_pins {
-			pinumx = <RZA1_PINMUX(4, 0, 2)>;
-			input-enable;
-		};
-
-		tioc0_output_pins {
-			pinmux = <RZA1_PINMUX(4, 1, 1)>;
-			output-enable;
-		};
-	};
-  };
-
-  &tioc0 {
-	...
-	pinctrl-0 = <&tioc0_pins>;
-	...
-  };
-
-  Pin #0 on port #4 is configured as alternate function #2 with IO direction
-  specified by software as input.
-  Pin #1 on port #4 is configured as alternate function #1 with IO direction
-  specified by software as output.
-
-- GPIO controller sub-nodes:
-  Each port of the r7s72100 pin controller hardware is itself a GPIO controller.
-  Different SoCs have different numbers of available pins per port, but
-  generally speaking, each of them can be configured in GPIO ("port") mode
-  on this hardware.
-  Describe GPIO controllers using sub-nodes with the following properties.
-
-  Required properties:
-    - gpio-controller
-      empty property as defined by the GPIO bindings documentation.
-    - #gpio-cells
-      number of cells required to identify and configure a GPIO.
-      Shall be 2.
-    - gpio-ranges
-      Describes a GPIO controller specifying its specific pin base, the pin
-      base in the global pin numbering space, and the number of controlled
-      pins, as defined by the GPIO bindings documentation. Refer to
-      Documentation/devicetree/bindings/gpio/gpio.txt file for a more detailed
-      description.
-
-  Example:
-  A GPIO controller node, controlling 16 pins indexed from 0.
-  The GPIO controller base in the global pin indexing space is pin 48, thus
-  pins [0 - 15] on this controller map to pins [48 - 63] in the global pin
-  indexing space.
-
-  port3: gpio-3 {
-	gpio-controller;
-	#gpio-cells = <2>;
-	gpio-ranges = <&pinctrl 0 48 16>;
-  };
-
-  A device node willing to use pins controlled by this GPIO controller, shall
-  refer to it as follows:
-
-  led1 {
-	gpios = <&port3 10 GPIO_ACTIVE_LOW>;
-  };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
new file mode 100644
index 000000000000..9083040c996a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rza1-ports.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A1 combined Pin and GPIO controller
+
+maintainers:
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO
+  controller, named "Ports" in the hardware reference manual.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis
+  writing configuration values to per-port register sets.
+  Each "port" features up to 16 pins, each of them configurable for GPIO
+  function (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    oneOf:
+      - const: renesas,r7s72100-ports     # RZ/A1H
+      - items:
+          - const: renesas,r7s72101-ports # RZ/A1M
+          - const: renesas,r7s72100-ports # fallback
+      - const: renesas,r7s72102-ports     # RZ/A1L
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^gpio-[0-9]*$":
+    type: object
+    additionalProperties: false
+
+    description:
+      Each port of the r7s72100 pin controller hardware is itself a GPIO
+      controller.
+      Different SoCs have different numbers of available pins per port, but
+      generally speaking, each of them can be configured in GPIO ("port") mode
+      on this hardware.
+      Describe GPIO controllers using sub-nodes with the following properties.
+
+    properties:
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+      gpio-ranges:
+        maxItems: 1
+
+    required:
+      - gpio-controller
+      - '#gpio-cells'
+      - gpio-ranges
+
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        A pin multiplexing sub-node describes how to configure a set of (or a
+        single) pin in some desired alternate function mode.
+        A single sub-node may define several pin configurations.
+        A few alternate function require special pin configuration flags to be
+        supplied along with the alternate function configuration number.
+        The hardware reference manual specifies when a pin function requires
+        "software IO driven" mode to be specified. To do so use the generic
+        properties from the <include/linux/pinctrl/pinconf_generic.h> header
+        file to instruct the pin controller to perform the desired pin
+        configuration operation.
+        The hardware reference manual specifies when a pin has to be configured
+        to work in bi-directional mode and when the IO direction has to be
+        specified by software. Bi-directional pins must be managed by the pin
+        controller driver internally, while software driven IO direction has to
+        be explicitly selected when multiple options are available.
+
+      properties:
+        pinmux:
+          description: |
+            Integer array representing pin number and pin multiplexing
+            configuration.
+            When a pin has to be configured in alternate function mode, use
+            this property to identify the pin by its global index, and provide
+            its alternate function configuration number along with it.
+            When multiple pins are required to be configured as part of the
+            same alternate function they shall be specified as members of the
+            same argument list of a single "pinmux" property.
+            Helper macros to ease assembling the pin index from its position
+            (port where it sits on and pin number) and alternate function
+            identifier are provided by the pin controller header file at:
+            <include/dt-bindings/pinctrl/r7s72100-pinctrl.h>
+            Integers values in "pinmux" argument list are assembled as:
+            ((PORT * 16 + PIN) | MUX_FUNC << 16)
+
+        phandle: true
+        input-enable: true
+        output-enable: true
+
+      required:
+        - pinmux
+
+      additionalProperties: false
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+    pinctrl: pinctrl@fcfe3000 {
+            compatible = "renesas,r7s72100-ports";
+
+            reg = <0xfcfe3000 0x4230>;
+
+            /*
+             * A GPIO controller node, controlling 16 pins indexed from 0.
+             * The GPIO controller base in the global pin indexing space is pin
+             * 48, thus pins [0 - 15] on this controller map to pins [48 - 63]
+             * in the global pin indexing space.
+             */
+            port3: gpio-3 {
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    gpio-ranges = <&pinctrl 0 48 16>;
+            };
+
+            /*
+             * A serial communication interface with a TX output pin and an RX
+             * input pin.
+             * Pin #0 on port #3 is configured as alternate function #6.
+             * Pin #2 on port #3 is configured as alternate function #4.
+             */
+            scif2_pins: serial2 {
+                    pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
+            };
+
+
+            /*
+             * I2c master: both SDA and SCL pins need bi-directional operations
+             * Pin #4 on port #1 is configured as alternate function #1.
+             * Pin #5 on port #1 is configured as alternate function #1.
+             * Both need to work in bi-directional mode, the driver must manage
+             * this internally.
+             */
+            i2c2_pins: i2c2 {
+                    pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
+            };
+
+
+            /*
+             * Multi-function timer input and output compare pins.
+             */
+            tioc0_pins: tioc0 {
+                    /*
+                     * Configure TIOC0A as software driven input
+                     * Pin #0 on port #4 is configured as alternate function #2
+                     * with IO direction specified by software as input.
+                     */
+                    tioc0_input_pins {
+                            pinmux = <RZA1_PINMUX(4, 0, 2)>;
+                            input-enable;
+                    };
+
+                    /*
+                     * Configure TIOC0B as software driven output
+                     * Pin #1 on port #4 is configured as alternate function #1
+                     * with IO direction specified by software as output.
+                     */
+                    tioc0_output_pins {
+                            pinmux = <RZA1_PINMUX(4, 1, 1)>;
+                            output-enable;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt
deleted file mode 100644
index a63ccd476cda..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-Renesas RZ/A2 combined Pin and GPIO controller
-
-The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO controller.
-Pin multiplexing and GPIO configuration is performed on a per-pin basis.
-Each port features up to 8 pins, each of them configurable for GPIO
-function (port mode) or in alternate function mode.
-Up to 8 different alternate function modes exist for each single pin.
-
-Pin controller node
--------------------
-
-Required properties:
-  - compatible: shall be:
-    - "renesas,r7s9210-pinctrl": for RZ/A2M
-  - reg
-    Address base and length of the memory area where the pin controller
-    hardware is mapped to.
-  - gpio-controller
-    This pin controller also controls pins as GPIO
-  - #gpio-cells
-    Must be 2
-  - gpio-ranges
-    Expresses the total number of GPIO ports/pins in this SoC
-
-Example: Pin controller node for RZ/A2M SoC (r7s9210)
-
-	pinctrl: pin-controller@fcffe000 {
-		compatible = "renesas,r7s9210-pinctrl";
-		reg = <0xfcffe000 0x1000>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&pinctrl 0 0 176>;
-	};
-
-Sub-nodes
----------
-
-The child nodes of the pin controller designate pins to be used for
-specific peripheral functions or as GPIO.
-
-- Pin multiplexing sub-nodes:
-  A pin multiplexing sub-node describes how to configure a set of
-  (or a single) pin in some desired alternate function mode.
-  The values for the pinmux properties are a combination of port name, pin
-  number and the desired function index. Use the RZA2_PINMUX macro located
-  in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily define these.
-  For assigning GPIO pins, use the macro RZA2_PIN also in r7s9210-pinctrl.h
-  to express the desired port pin.
-
-  Required properties:
-    - pinmux:
-      integer array representing pin number and pin multiplexing configuration.
-      When a pin has to be configured in alternate function mode, use this
-      property to identify the pin by its global index, and provide its
-      alternate function configuration number along with it.
-      When multiple pins are required to be configured as part of the same
-      alternate function they shall be specified as members of the same
-      argument list of a single "pinmux" property.
-      Helper macros to ease assembling the pin index from its position
-      (port where it sits on and pin number) and alternate function identifier
-      are provided by the pin controller header file at:
-      <dt-bindings/pinctrl/r7s9210-pinctrl.h>
-      Integers values in "pinmux" argument list are assembled as:
-      ((PORT * 8 + PIN) | MUX_FUNC << 16)
-
-  Example: Board specific pins configuration
-
-	&pinctrl {
-		/* Serial Console */
-		scif4_pins: serial4 {
-			pinmux = <RZA2_PINMUX(PORT9, 0, 4)>,	/* TxD4 */
-				 <RZA2_PINMUX(PORT9, 1, 4)>;	/* RxD4 */
-		};
-	};
-
-  Example: Assigning a GPIO:
-
-	leds {
-		status = "okay";
-		compatible = "gpio-leds";
-
-		led0 {
-			/* P6_0 */
-			gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
new file mode 100644
index 000000000000..d761fddc2206
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rza2-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A2 combined Pin and GPIO controller
+
+maintainers:
+  - Chris Brandt <chris.brandt@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO
+  controller.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+  Each port features up to 8 pins, each of them configurable for GPIO function
+  (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    const: "renesas,r7s9210-pinctrl" # RZ/A2M
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZA2_PIN() helper macro in r7s9210-pinctrl.h.
+      E.g. "RZA2_PIN(PORT6, 0)" for P6_0.
+
+  gpio-ranges:
+    maxItems: 1
+
+patternProperties:
+  "^.*$":
+    if:
+      type: object
+    then:
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+      description:
+        The child nodes of the pin controller designate pins to be used for
+        specific peripheral functions or as GPIO.
+
+        A pin multiplexing sub-node describes how to configure a set of
+        (or a single) pin in some desired alternate function mode.
+        The values for the pinmux properties are a combination of port name,
+        pin number and the desired function index. Use the RZA2_PINMUX macro
+        located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily
+        define these.
+        For assigning GPIO pins, use the macro RZA2_PIN also in
+        to express the desired port pin.
+
+      properties:
+        phandle: true
+
+        pinmux:
+          description:
+            Values are constructed from GPIO port number, pin number, and
+            alternate function configuration number using the RZA2_PINMUX()
+            helper macro in r7s9210-pinctrl.h.
+
+      required:
+        - pinmux
+
+      additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
+    pinctrl: pinctrl@fcffe000 {
+            compatible = "renesas,r7s9210-pinctrl";
+            reg = <0xfcffe000 0x1000>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pinctrl 0 0 176>;
+
+            /* Serial Console */
+            scif4_pins: serial4 {
+                    pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */
+                             <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
new file mode 100644
index 000000000000..f081acb7ba04
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,V2L} combined Pin and GPIO controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The Renesas SoCs of the RZ/{G2L,V2L} alike series feature a combined Pin and
+  GPIO controller.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+  Each port features up to 8 pins, each of them configurable for GPIO function
+  (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five
+              - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
+
+      - items:
+          - enum:
+              - renesas,r9a07g054-pinctrl     # RZ/V2L
+          - const: renesas,r9a07g044-pinctrl  # RZ/G2{L,LC} fallback for RZ/V2L
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
+      second cell represents consumer flag as mentioned in ../gpio/gpio.txt
+      E.g. "RZG2L_GPIO(39, 1)" for P39_1.
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
+      second cell is used to specify the flag.
+      E.g. "interrupts = <RZG2L_GPIO(43, 0) IRQ_TYPE_EDGE_FALLING>;" if P43_0 is
+      being used as an interrupt.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: GPIO_RSTN signal
+      - description: GPIO_PORT_RESETN signal
+      - description: GPIO_SPARE_RESETN signal
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        phandle: true
+        pinmux:
+          description:
+            Values are constructed from GPIO port number, pin number, and
+            alternate function configuration number using the RZG2L_PORT_PINMUX()
+            helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h>.
+        pins: true
+        drive-strength:
+          enum: [ 2, 4, 8, 12 ]
+        output-impedance-ohms:
+          enum: [ 33, 50, 66, 100 ]
+        power-source:
+          description: I/O voltage in millivolt.
+          enum: [ 1800, 2500, 3300 ]
+        slew-rate: true
+        gpio-hog: true
+        gpios: true
+        input-enable: true
+        output-high: true
+        output-low: true
+        line-name: true
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupt-controller
+  - '#interrupt-cells'
+  - clocks
+  - power-domains
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    pinctrl: pinctrl@11030000 {
+            compatible = "renesas,r9a07g044-pinctrl";
+            reg = <0x11030000 0x10000>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pinctrl 0 0 392>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
+            resets = <&cpg R9A07G044_GPIO_RSTN>,
+                     <&cpg R9A07G044_GPIO_PORT_RESETN>,
+                     <&cpg R9A07G044_GPIO_SPARE_RESETN>;
+            power-domains = <&cpg>;
+
+            scif0_pins: serial0 {
+                    pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* Tx */
+                             <RZG2L_PORT_PINMUX(38, 1, 1)>; /* Rx */
+            };
+
+            i2c1_pins: i2c1 {
+                    pins = "RIIC1_SDA", "RIIC1_SCL";
+                    input-enable;
+            };
+
+            sd1-pwr-en-hog {
+                    gpio-hog;
+                    gpios = <RZG2L_GPIO(39, 2) 0>;
+                    output-high;
+                    line-name = "sd1_pwr_en";
+            };
+
+            sdhi1_pins: sd1 {
+                    sd1_mux {
+                            pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */
+                                     <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */
+                            power-source  = <3300>;
+                    };
+
+                    sd1_data {
+                            pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+                            power-source  = <3300>;
+                    };
+
+                    sd1_ctrl {
+                            pins = "SD1_CLK", "SD1_CMD";
+                            power-source  = <3300>;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
deleted file mode 100644
index 25e53acd523e..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
+++ /dev/null
@@ -1,153 +0,0 @@
-Renesas RZ/N1 SoC Pinctrl node description.
-
-Pin controller node
--------------------
-Required properties:
-- compatible: SoC-specific compatible string "renesas,<soc-specific>-pinctrl"
-  followed by "renesas,rzn1-pinctrl" as fallback. The SoC-specific compatible
-  strings must be one of:
-	"renesas,r9a06g032-pinctrl" for RZ/N1D
-	"renesas,r9a06g033-pinctrl" for RZ/N1S
-- reg: Address base and length of the memory area where the pin controller
-  hardware is mapped to.
-- clocks: phandle for the clock, see the description of clock-names below.
-- clock-names: Contains the name of the clock:
-    "bus", the bus clock, sometimes described as pclk, for register accesses.
-
-Example:
-	pinctrl: pin-controller@40067000 {
-	    compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
-	    reg = <0x40067000 0x1000>, <0x51000000 0x480>;
-	    clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
-	    clock-names = "bus";
-	};
-
-Sub-nodes
----------
-
-The child nodes of the pin controller node describe a pin multiplexing
-function.
-
-- Pin multiplexing sub-nodes:
-  A pin multiplexing sub-node describes how to configure a set of
-  (or a single) pin in some desired alternate function mode.
-  A single sub-node may define several pin configurations.
-  Please refer to pinctrl-bindings.txt to get to know more on generic
-  pin properties usage.
-
-  The allowed generic formats for a pin multiplexing sub-node are the
-  following ones:
-
-  node-1 {
-      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-      GENERIC_PINCONFIG;
-  };
-
-  node-2 {
-      sub-node-1 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      sub-node-2 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      ...
-
-      sub-node-n {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-  };
-
-  node-3 {
-      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-      GENERIC_PINCONFIG;
-
-      sub-node-1 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      ...
-
-      sub-node-n {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-  };
-
-  Use the latter two formats when pins part of the same logical group need to
-  have different generic pin configuration flags applied. Note that the generic
-  pinconfig in node-3 does not apply to the sub-nodes.
-
-  Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle
-  of the most external one.
-
-  Eg.
-
-  client-1 {
-      ...
-      pinctrl-0 = <&node-1>;
-      ...
-  };
-
-  client-2 {
-      ...
-      pinctrl-0 = <&node-2>;
-      ...
-  };
-
-  Required properties:
-    - pinmux:
-      integer array representing pin number and pin multiplexing configuration.
-      When a pin has to be configured in alternate function mode, use this
-      property to identify the pin by its global index, and provide its
-      alternate function configuration number along with it.
-      When multiple pins are required to be configured as part of the same
-      alternate function they shall be specified as members of the same
-      argument list of a single "pinmux" property.
-      Integers values in the "pinmux" argument list are assembled as:
-      (PIN | MUX_FUNC << 8)
-      where PIN directly corresponds to the pl_gpio pin number and MUX_FUNC is
-      one of the alternate function identifiers defined in:
-      <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
-      These identifiers collapse the IO Multiplex Configuration Level 1 and
-      Level 2 numbers that are detailed in the hardware reference manual into a
-      single number. The identifiers for Level 2 are simply offset by 10.
-      Additional identifiers are provided to specify the MDIO source peripheral.
-
-  Optional generic pinconf properties:
-    - bias-disable		- disable any pin bias
-    - bias-pull-up		- pull up the pin with 50 KOhm
-    - bias-pull-down		- pull down the pin with 50 KOhm
-    - bias-high-impedance	- high impedance mode
-    - drive-strength		- sink or source at most 4, 6, 8 or 12 mA
-
-  Example:
-  A serial communication interface with a TX output pin and an RX input pin.
-
-  &pinctrl {
-	pins_uart0: pins_uart0 {
-		pinmux = <
-			RZN1_PINMUX(103, RZN1_FUNC_UART0_I)	/* UART0_TXD */
-			RZN1_PINMUX(104, RZN1_FUNC_UART0_I)	/* UART0_RXD */
-		>;
-	};
-  };
-
-  Example 2:
-  Here we set the pull up on the RXD pin of the UART.
-
-  &pinctrl {
-	pins_uart0: pins_uart0 {
-		pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>;	/* TXD */
-
-		pins_uart6_rx {
-			pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>; /* RXD */
-			bias-pull-up;
-		};
-	};
-  };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
new file mode 100644
index 000000000000..70b1788ab594
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzn1-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Pin Controller
+
+maintainers:
+  - Gareth Williams <gareth.williams.jx@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-pinctrl # RZ/N1D
+          - renesas,r9a06g033-pinctrl # RZ/N1S
+      - const: renesas,rzn1-pinctrl   # Generic RZ/N1
+
+  reg:
+    items:
+      - description: GPIO Multiplexing Level1 Register Block
+      - description: GPIO Multiplexing Level2 Register Block
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: bus
+    description:
+      The bus clock, sometimes described as pclk, for register accesses.
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        A pin multiplexing sub-node describes how to configure a set of (or a
+        single) pin in some desired alternate function mode.
+        A single sub-node may define several pin configurations.
+
+      properties:
+        pinmux:
+          description: |
+            Integer array representing pin number and pin multiplexing
+            configuration.
+            When a pin has to be configured in alternate function mode, use
+            this property to identify the pin by its global index, and provide
+            its alternate function configuration number along with it.
+            When multiple pins are required to be configured as part of the
+            same alternate function they shall be specified as members of the
+            same argument list of a single "pinmux" property.
+            Integers values in the "pinmux" argument list are assembled as:
+            (PIN | MUX_FUNC << 8)
+            where PIN directly corresponds to the pl_gpio pin number and
+            MUX_FUNC is one of the alternate function identifiers defined in:
+            <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
+            These identifiers collapse the IO Multiplex Configuration Level 1
+            and Level 2 numbers that are detailed in the hardware reference
+            manual into a single number. The identifiers for Level 2 are simply
+            offset by 10.  Additional identifiers are provided to specify the
+            MDIO source peripheral.
+
+        phandle: true
+        bias-disable: true
+        bias-pull-up:
+          description: Pull up the pin with 50 kOhm
+        bias-pull-down:
+          description: Pull down the pin with 50 kOhm
+        bias-high-impedance: true
+        drive-strength:
+          enum: [ 4, 6, 8, 12 ]
+
+      required:
+        - pinmux
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    #include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+    pinctrl: pinctrl@40067000 {
+            compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
+            reg = <0x40067000 0x1000>, <0x51000000 0x480>;
+            clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
+            clock-names = "bus";
+
+            /*
+             * A serial communication interface with a TX output pin and an RX
+             * input pin.
+             */
+            pins_uart0: pins_uart0 {
+                    pinmux = <
+                            RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */
+                            RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */
+                    >;
+            };
+
+            /*
+             * Set the pull-up on the RXD pin of the UART.
+             */
+            pins_uart0_alt: pins_uart0_alt {
+                    pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>;
+
+                    pins_uart6_rx {
+                            pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>;
+                            bias-pull-up;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
new file mode 100644
index 000000000000..eac6245db7dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzv2m-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M combined Pin and GPIO controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Phil Edworthy <phil.edworthy@renesas.com>
+
+description:
+  The Renesas RZ/V2M SoC features a combined Pin and GPIO controller.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+  Each port features up to 16 pins, each of them configurable for GPIO function
+  (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    const: renesas,r9a09g011-pinctrl # RZ/V2M
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZV2M_GPIO() helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h> and the
+      second cell represents consumer flag as mentioned in ../gpio/gpio.txt
+      E.g. "RZV2M_GPIO(8, 1)" for P8_1.
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupts:
+    description: INEXINT[0..38] corresponding to individual pin inputs.
+    maxItems: 39
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        phandle: true
+        pinmux:
+          description:
+            Values are constructed from GPIO port number, pin number, and
+            alternate function configuration number using the RZV2M_PORT_PINMUX()
+            helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h>.
+        pins: true
+        bias-disable: true
+        bias-pull-down: true
+        bias-pull-up: true
+        drive-strength-microamp:
+          # Superset of supported values
+          enum: [ 1600, 1800, 2000, 3200, 3800, 4000, 6400, 7800, 8000,
+                  9000, 9600, 11000, 12000, 13000, 18000 ]
+        slew-rate:
+          description: 0 is slow slew rate, 1 is fast slew rate
+          enum: [ 0, 1 ]
+        gpio-hog: true
+        gpios: true
+        output-high: true
+        output-low: true
+        line-name: true
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rzv2m-pinctrl.h>
+    #include <dt-bindings/clock/r9a09g011-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl: pinctrl@b6250000 {
+            compatible = "renesas,r9a09g011-pinctrl";
+            reg = <0xb6250000 0x800>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pinctrl 0 0 352>;
+            interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD R9A09G011_PFC_PCLK>;
+            resets = <&cpg R9A09G011_PFC_PRESETN>;
+            power-domains = <&cpg>;
+
+            i2c2_pins: i2c2 {
+                    pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */
+                             <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
deleted file mode 100644
index 2113cfaa26e6..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
+++ /dev/null
@@ -1,169 +0,0 @@
-* Rockchip Pinmux Controller
-
-The Rockchip Pinmux Controller, enables the IC
-to share one PAD to several functional blocks. The sharing is done by
-multiplexing the PAD input/output signals. For each PAD there are several
-muxing options with option 0 being the use as a GPIO.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The Rockchip pin configuration node is a node of a group of pins which can be
-used for a specific device or function. This node represents both mux and
-config of the pins in that group. The 'pins' selects the function mode(also
-named pin mode) this pin can work on and the 'config' configures various pad
-settings such as pull-up, etc.
-
-The pins are grouped into up to 5 individual pin banks which need to be
-defined as gpio sub-nodes of the pinmux controller.
-
-Required properties for iomux controller:
-  - compatible: should be
-		"rockchip,px30-pinctrl":    for Rockchip PX30
-		"rockchip,rv1108-pinctrl":  for Rockchip RV1108
-		"rockchip,rk2928-pinctrl":  for Rockchip RK2928
-		"rockchip,rk3066a-pinctrl": for Rockchip RK3066a
-		"rockchip,rk3066b-pinctrl": for Rockchip RK3066b
-		"rockchip,rk3128-pinctrl":  for Rockchip RK3128
-		"rockchip,rk3188-pinctrl":  for Rockchip RK3188
-		"rockchip,rk3228-pinctrl":  for Rockchip RK3228
-		"rockchip,rk3288-pinctrl":  for Rockchip RK3288
-		"rockchip,rk3308-pinctrl":  for Rockchip RK3308
-		"rockchip,rk3328-pinctrl":  for Rockchip RK3328
-		"rockchip,rk3368-pinctrl":  for Rockchip RK3368
-		"rockchip,rk3399-pinctrl":  for Rockchip RK3399
-
-  - rockchip,grf: phandle referencing a syscon providing the
-	 "general register files"
-
-Optional properties for iomux controller:
-  - rockchip,pmu: phandle referencing a syscon providing the pmu registers
-	 as some SoCs carry parts of the iomux controller registers there.
-	 Required for at least rk3188 and rk3288. On the rk3368 this should
-	 point to the PMUGRF syscon.
-
-Deprecated properties for iomux controller:
-  - reg: first element is the general register space of the iomux controller
-	 It should be large enough to contain also separate pull registers.
-	 second element is the separate pull register space of the rk3188.
-	 Use rockchip,grf and rockchip,pmu described above instead.
-
-Required properties for gpio sub nodes:
-  - compatible: "rockchip,gpio-bank"
-  - reg: register of the gpio bank (different than the iomux registerset)
-  - interrupts: base interrupt of the gpio bank in the interrupt controller
-  - clocks: clock that drives this bank
-  - gpio-controller: identifies the node as a gpio controller and pin bank.
-  - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
-    binding is used, the amount of cells must be specified as 2. See generic
-    GPIO binding documentation for description of particular cells.
-  - interrupt-controller: identifies the controller node as interrupt-parent.
-  - #interrupt-cells: the value of this property should be 2 and the interrupt
-    cells should use the standard two-cell scheme described in
-    bindings/interrupt-controller/interrupts.txt
-
-Deprecated properties for gpio sub nodes:
-  - compatible: "rockchip,rk3188-gpio-bank0"
-  - reg: second element: separate pull register for rk3188 bank0, use
-	 rockchip,pmu described above instead
-
-Required properties for pin configuration node:
-  - rockchip,pins: 3 integers array, represents a group of pins mux and config
-    setting. The format is rockchip,pins = <PIN_BANK PIN_BANK_IDX MUX &phandle>.
-    The MUX 0 means gpio and MUX 1 to N mean the specific device function.
-    The phandle of a node containing the generic pinconfig options
-    to use, as described in pinctrl-bindings.txt in this directory.
-
-Examples:
-
-#include <dt-bindings/pinctrl/rockchip.h>
-
-...
-
-pinctrl@20008000 {
-	compatible = "rockchip,rk3066a-pinctrl";
-	rockchip,grf = <&grf>;
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	gpio0: gpio0@20034000 {
-		compatible = "rockchip,gpio-bank";
-		reg = <0x20034000 0x100>;
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clk_gates8 9>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	...
-
-	pcfg_pull_default: pcfg_pull_default {
-		bias-pull-pin-default
-	};
-
-	uart2 {
-		uart2_xfer: uart2-xfer {
-			rockchip,pins = <RK_GPIO1 8 1 &pcfg_pull_default>,
-					<RK_GPIO1 9 1 &pcfg_pull_default>;
-		};
-	};
-};
-
-uart2: serial@20064000 {
-	compatible = "snps,dw-apb-uart";
-	reg = <0x20064000 0x400>;
-	interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-	reg-shift = <2>;
-	reg-io-width = <1>;
-	clocks = <&mux_uart2>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_xfer>;
-};
-
-Example for rk3188:
-
-	pinctrl@20008000 {
-		compatible = "rockchip,rk3188-pinctrl";
-		rockchip,grf = <&grf>;
-		rockchip,pmu = <&pmu>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio0: gpio0@2000a000 {
-			compatible = "rockchip,rk3188-gpio-bank0";
-			reg = <0x2000a000 0x100>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_gates8 9>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio1: gpio1@2003c000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x2003c000 0x100>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_gates8 10>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		...
-
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
new file mode 100644
index 000000000000..b486f41df65f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/rockchip,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Pinmux Controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The Rockchip Pinmux Controller enables the IC to share one PAD
+  to several functional blocks. The sharing is done by multiplexing
+  the PAD input/output signals. For each PAD there are several muxing
+  options with option 0 being used as a GPIO.
+
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of the
+  phrase "pin configuration node".
+
+  The Rockchip pin configuration node is a node of a group of pins which can be
+  used for a specific device or function. This node represents both mux and
+  config of the pins in that group. The 'pins' selects the function mode
+  (also named pin mode) this pin can work on and the 'config' configures
+  various pad settings such as pull-up, etc.
+
+  The pins are grouped into up to 9 individual pin banks which need to be
+  defined as gpio sub-nodes of the pinmux controller.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-pinctrl
+      - rockchip,rk2928-pinctrl
+      - rockchip,rk3036-pinctrl
+      - rockchip,rk3066a-pinctrl
+      - rockchip,rk3066b-pinctrl
+      - rockchip,rk3128-pinctrl
+      - rockchip,rk3188-pinctrl
+      - rockchip,rk3228-pinctrl
+      - rockchip,rk3288-pinctrl
+      - rockchip,rk3308-pinctrl
+      - rockchip,rk3328-pinctrl
+      - rockchip,rk3368-pinctrl
+      - rockchip,rk3399-pinctrl
+      - rockchip,rk3568-pinctrl
+      - rockchip,rk3588-pinctrl
+      - rockchip,rv1108-pinctrl
+      - rockchip,rv1126-pinctrl
+
+  rockchip,grf:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description:
+      The phandle of the syscon node for the GRF registers.
+
+  rockchip,pmu:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description:
+      The phandle of the syscon node for the PMU registers,
+      as some SoCs carry parts of the iomux controller registers there.
+      Required for at least rk3188 and rk3288. On the rk3368 this should
+      point to the PMUGRF syscon.
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  ranges: true
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - rockchip,grf
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+patternProperties:
+  "gpio@[0-9a-f]+$":
+    type: object
+
+    $ref: "/schemas/gpio/rockchip,gpio-bank.yaml#"
+
+    unevaluatedProperties: false
+
+  "pcfg-[a-z0-9-]+$":
+    type: object
+    properties:
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-pin-default: true
+
+      bias-pull-up: true
+
+      drive-strength:
+        minimum: 0
+        maximum: 20
+
+      input-enable: true
+
+      input-schmitt-enable: true
+
+      output-high: true
+
+      output-low: true
+
+    additionalProperties: false
+
+additionalProperties:
+  type: object
+  additionalProperties:
+    type: object
+    properties:
+      rockchip,pins:
+        $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
+        minItems: 1
+        items:
+          items:
+            - minimum: 0
+              maximum: 8
+              description:
+                Pin bank.
+            - minimum: 0
+              maximum: 31
+              description:
+                Pin bank index.
+            - minimum: 0
+              maximum: 10
+              description:
+                Mux 0 means GPIO and mux 1 to N means
+                the specific device function.
+            - description:
+                The phandle of a node contains the generic pinconfig options
+                to use as described in pinctrl-bindings.txt.
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    pinctrl: pinctrl {
+      compatible = "rockchip,rk3066a-pinctrl";
+      rockchip,grf = <&grf>;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      gpio0: gpio@20034000 {
+        compatible = "rockchip,gpio-bank";
+        reg = <0x20034000 0x100>;
+        interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_gates8 9>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+      };
+
+      pcfg_pull_default: pcfg-pull-default {
+        bias-pull-pin-default;
+      };
+
+      uart2 {
+        uart2_xfer: uart2-xfer {
+          rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
+                          <1 RK_PB1 1 &pcfg_pull_default>;
+        };
+      };
+    };
+
+    uart2: serial@20064000 {
+      compatible = "snps,dw-apb-uart";
+      reg = <0x20064000 0x400>;
+      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&mux_uart2>;
+      pinctrl-0 = <&uart2_xfer>;
+      pinctrl-names = "default";
+      reg-io-width = <1>;
+      reg-shift = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
new file mode 100644
index 000000000000..8cf3c47ab86b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-gpio-bank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - gpio bank
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  GPIO bank description for Samsung S3C/S5P/Exynos SoC pin controller.
+
+  See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+  additional information and example.
+
+properties:
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#interrupt-cells':
+    description:
+      For GPIO banks supporting external GPIO interrupts or external wake-up
+      interrupts.
+    const: 2
+
+  interrupt-controller:
+    description:
+      For GPIO banks supporting external GPIO interrupts or external wake-up
+      interrupts.
+
+  interrupts:
+    description:
+      For GPIO banks supporting direct external wake-up interrupts (without
+      multiplexing).  Number of interrupts must match number of wake-up capable
+      pins of this bank.
+    minItems: 1
+    maxItems: 8
+
+required:
+  - '#gpio-cells'
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
new file mode 100644
index 000000000000..f796f27bf0e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-pins-cfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - pins configuration
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  Pins configuration for Samsung S3C/S5P/Exynos SoC pin controller.
+
+  The values used for config properties should be derived from the hardware
+  manual and these values are programmed as-is into the pin pull up/down and
+  driver strength register of the pin-controller.
+
+  See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+  additional information and example.
+
+properties:
+  samsung,pins:
+    description: |
+      List of pins to configure. For initial and sleep states, the maximum
+      number is one pin. In other cases there is no upper limit.
+
+      The pins should use lowercase names matching hardware manual, e.g. for
+      GPA0 bank: gpa0-0, gpa0-1, gpa0-2.
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  samsung,pin-function:
+    description: |
+      The pin function selection that should be applied on the pins listed in the
+      child node is specified using the "samsung,pin-function" property. The value
+      of this property that should be applied to each of the pins listed in the
+      "samsung,pins" property should be picked from the hardware manual of the SoC
+      for the specified pin group. This property is optional in the child node if
+      no specific function selection is desired for the pins listed in the child
+      node. The value of this property is used as-is to program the pin-controller
+      function selector register of the pin-bank.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  samsung,pin-drv:
+    description: Drive strength configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  samsung,pin-pud:
+    description: Pull up/down configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  samsung,pin-val:
+    description: Initial value of pin output buffer.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  samsung,pin-con-pdn:
+    description: Function in power down mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  samsung,pin-pud-pdn:
+    description: Pull up/down configuration in power down mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+required:
+  - samsung,pins
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
new file mode 100644
index 000000000000..1de91a51234d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - wake-up interrupt controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  External wake-up interrupts for Samsung S3C/S5P/Exynos SoC pin controller.
+  For S3C24xx, S3C64xx, S5PV210 and Exynos4210 compatible wake-up interrupt
+  controllers, only one pin-controller device node can include external wake-up
+  interrupts child node (in other words, only one External wake-up interrupts
+  pin-controller is supported).
+  For newer controllers, multiple pin-controller device node can include
+  external wake-up interrupts child node.
+
+  See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2410-wakeup-eint
+      - samsung,s3c2412-wakeup-eint
+      - samsung,s3c64xx-wakeup-eint
+      - samsung,s5pv210-wakeup-eint
+      - samsung,exynos4210-wakeup-eint
+      - samsung,exynos7-wakeup-eint
+      - samsung,exynos850-wakeup-eint
+      - samsung,exynosautov9-wakeup-eint
+
+  interrupts:
+    description:
+      Interrupt used by multiplexed external wake-up interrupts.
+    minItems: 1
+    maxItems: 6
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-wakeup-eint
+              - samsung,s3c2412-wakeup-eint
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+      required:
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s3c64xx-wakeup-eint
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+      required:
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s5pv210-wakeup-eint
+              - samsung,exynos4210-wakeup-eint
+              - samsung,exynos7-wakeup-eint
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 1
+      required:
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos850-wakeup-eint
+              - samsung,exynosautov9-wakeup-eint
+    then:
+      properties:
+        interrupts: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
new file mode 100644
index 000000000000..eb2b2692607d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
@@ -0,0 +1,387 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  All the pin controller nodes should be represented in the aliases node using
+  the following format 'pinctrl{n}' where n is a unique number for the alias.
+
+  The controller supports three types of interrupts::
+   - External GPIO interrupts (see interrupts property in pin controller node);
+
+   - External wake-up interrupts - multiplexed (capable of waking up the system
+     see interrupts property in external wake-up interrupt controller node -
+     samsung,pinctrl-wakeup-interrupt.yaml);
+
+   - External wake-up interrupts - direct (capable of waking up the system, see
+     interrupts property in every bank of pin controller with external wake-up
+     interrupt controller - samsung,pinctrl-gpio-bank.yaml).
+
+properties:
+  $nodename:
+    pattern: "^pinctrl(@.*)?"
+
+  compatible:
+    enum:
+      - samsung,s3c2412-pinctrl
+      - samsung,s3c2416-pinctrl
+      - samsung,s3c2440-pinctrl
+      - samsung,s3c2450-pinctrl
+      - samsung,s3c64xx-pinctrl
+      - samsung,s5pv210-pinctrl
+      - samsung,exynos3250-pinctrl
+      - samsung,exynos4210-pinctrl
+      - samsung,exynos4x12-pinctrl
+      - samsung,exynos5250-pinctrl
+      - samsung,exynos5260-pinctrl
+      - samsung,exynos5410-pinctrl
+      - samsung,exynos5420-pinctrl
+      - samsung,exynos5433-pinctrl
+      - samsung,exynos7-pinctrl
+      - samsung,exynos7885-pinctrl
+      - samsung,exynos850-pinctrl
+      - samsung,exynosautov9-pinctrl
+      - tesla,fsd-pinctrl
+
+  interrupts:
+    description:
+      Required for GPIO banks supporting external GPIO interrupts.
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    description:
+      Second base address of the pin controller if the specific registers of
+      the pin controller are separated into the different base address.
+      Only certain banks of certain pin controller might need it.
+    minItems: 1
+    maxItems: 2
+
+  wakeup-interrupt-controller:
+    $ref: samsung,pinctrl-wakeup-interrupt.yaml
+
+patternProperties:
+  "^[a-z]+[0-9]*-gpio-bank$":
+    description:
+      Pin banks of the controller are represented by child nodes of the
+      controller node. Bank name is taken from name of the node.
+    $ref: samsung,pinctrl-gpio-bank.yaml
+
+  "^[a-z0-9-]+-pins$":
+    oneOf:
+      - $ref: samsung,pinctrl-pins-cfg.yaml
+        required:
+          - samsung,pins
+      - type: object
+        patternProperties:
+          "^[a-z0-9-]+-pins$":
+            $ref: samsung,pinctrl-pins-cfg.yaml
+
+        additionalProperties: false
+
+  "^(initial|sleep)-state$":
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      "^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$":
+        $ref: samsung,pinctrl-pins-cfg.yaml
+
+        properties:
+          samsung,pins:
+            description: See samsung,pinctrl-pins-cfg.yaml
+            $ref: /schemas/types.yaml#/definitions/string-array
+            maxItems: 1
+
+        required:
+          - samsung,pins
+
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-pinctrl
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+    else:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@7f008000 {
+        compatible = "samsung,s3c64xx-pinctrl";
+        reg = <0x7f008000 0x1000>;
+        interrupt-parent = <&vic1>;
+        interrupts = <21>;
+
+        wakeup-interrupt-controller {
+            compatible = "samsung,s3c64xx-wakeup-eint";
+            interrupts-extended = <&vic0 0>,
+                                  <&vic0 1>,
+                                  <&vic1 0>,
+                                  <&vic1 1>;
+        };
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpa-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        uart0-data-pins {
+            samsung,pins = "gpa-0", "gpa-1";
+            samsung,pin-function = <2>;
+            samsung,pin-pud = <0>;
+        };
+
+        // ...
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@11400000 {
+        compatible = "samsung,exynos4210-pinctrl";
+        reg = <0x11400000 0x1000>;
+        interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&sleep0>;
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpa0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        uart0-data-pins {
+            samsung,pins = "gpa0-0", "gpa0-1";
+            samsung,pin-function = <2>;
+            samsung,pin-pud = <0>;
+            samsung,pin-drv = <0>;
+        };
+
+        // ...
+
+        sleep0: sleep-state {
+            gpa0-0-pin {
+                samsung,pins = "gpa0-0";
+                samsung,pin-con-pdn = <2>;
+                samsung,pin-pud-pdn = <0>;
+            };
+
+            gpa0-1-pin {
+                samsung,pins = "gpa0-1";
+                samsung,pin-con-pdn = <0>;
+                samsung,pin-pud-pdn = <0>;
+            };
+
+            // ...
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@11000000 {
+        compatible = "samsung,exynos4210-pinctrl";
+        reg = <0x11000000 0x1000>;
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+        wakeup-interrupt-controller {
+            compatible = "samsung,exynos4210-wakeup-eint";
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpj0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        /* Pin bank without external interrupts */
+        gpy0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+
+        /* Pin bank with external direct wake-up interrupts */
+        gpx0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            interrupt-controller;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        sd0-clk-pins {
+            samsung,pins = "gpk0-0";
+            samsung,pin-function = <2>;
+            samsung,pin-pud = <0>;
+            samsung,pin-drv = <3>;
+        };
+
+        sd4-bus-width8-pins {
+            part-1-pins {
+                samsung,pins = "gpk0-3", "gpk0-4",
+                               "gpk0-5", "gpk0-6";
+                samsung,pin-function = <3>;
+                samsung,pin-pud = <3>;
+                samsung,pin-drv = <3>;
+            };
+
+            part-2-pins {
+                samsung,pins = "gpk1-3", "gpk1-4",
+                               "gpk1-5", "gpk1-6";
+                samsung,pin-function = <4>;
+                samsung,pin-pud = <3>;
+                samsung,pin-drv = <3>;
+            };
+        };
+
+        // ...
+
+        otg-gp-pins {
+            samsung,pins = "gpx3-3";
+            samsung,pin-function = <1>;
+            samsung,pin-pud = <0>;
+            samsung,pin-drv = <0>;
+            samsung,pin-val = <0>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@10580000 {
+        compatible = "samsung,exynos5433-pinctrl";
+        reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&initial_alive>;
+
+        wakeup-interrupt-controller {
+            compatible = "samsung,exynos7-wakeup-eint";
+            interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        /* Pin bank with external direct wake-up interrupts */
+        gpa0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            interrupt-controller;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        te-irq-pins {
+            samsung,pins = "gpf1-3";
+            samsung,pin-function = <0xf>;
+        };
+
+        // ..
+
+        initial_alive: initial-state {
+            gpa0-0-pin {
+                samsung,pins = "gpa0-0";
+                samsung,pin-function = <0>;
+                samsung,pin-pud = <1>;
+                samsung,pin-drv = <0>;
+            };
+
+            // ...
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@114b0000 {
+        compatible = "samsung,exynos5433-pinctrl";
+        reg = <0x114b0000 0x1000>;
+        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_aud>;
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpz0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        i2s0-bus-pins {
+            samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
+                           "gpz0-4", "gpz0-5", "gpz0-6";
+            samsung,pin-function = <2>;
+            samsung,pin-pud = <0>;
+            samsung,pin-drv = <0>;
+        };
+
+        // ...
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
deleted file mode 100644
index 70659c917bdc..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ /dev/null
@@ -1,380 +0,0 @@
-Samsung GPIO and Pin Mux/Config controller
-
-Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware
-controller. It controls the input/output settings on the available pads/pins
-and also provides ability to multiplex and configure the output of various
-on-chip controllers onto these pads.
-
-Required Properties:
-- compatible: should be one of the following.
-  - "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller,
-  - "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller,
-  - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller,
-  - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller,
-  - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
-  - "samsung,s5pv210-pinctrl": for S5PV210-compatible pin-controller,
-  - "samsung,exynos3250-pinctrl": for Exynos3250 compatible pin-controller.
-  - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
-  - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
-  - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
-  - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
-  - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
-  - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
-  - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller.
-  - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
-
-- reg: Base address of the pin controller hardware module and length of
-  the address space it occupies.
-
-  - reg: Second base address of the pin controller if the specific registers
-  of the pin controller are separated into the different base address.
-
-	Eg: GPF[1-5] of Exynos5433 are separated into the two base address.
-	- First base address is for GPAx and GPF[1-5] external interrupt
-	  registers.
-	- Second base address is for GPF[1-5] pinctrl registers.
-
-	pinctrl_0: pinctrl@10580000 {
-		compatible = "samsung,exynos5433-pinctrl";
-		reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
-
-		wakeup-interrupt-controller {
-			compatible = "samsung,exynos7-wakeup-eint";
-			interrupts = <0 16 0>;
-		};
-	};
-
-- Pin banks as child nodes: Pin banks of the controller are represented by child
-  nodes of the controller node. Bank name is taken from name of the node. Each
-  bank node must contain following properties:
-
-  - gpio-controller: identifies the node as a gpio controller and pin bank.
-  - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
-    binding is used, the amount of cells must be specified as 2. See the below
-    mentioned gpio binding representation for description of particular cells.
-
-	Eg: <&gpx2 6 0>
-	<[phandle of the gpio controller node]
-	[pin number within the gpio controller]
-	[flags]>
-
-	Values for gpio specifier:
-	- Pin number: is a value between 0 to 7.
-	- Flags: 0 - Active High
-		 1 - Active Low
-
-- Pin mux/config groups as child nodes: The pin mux (selecting pin function
-  mode) and pin config (pull up/down, driver strength) settings are represented
-  as child nodes of the pin-controller node. There should be atleast one
-  child node and there is no limit on the count of these child nodes. It is
-  also possible for a child node to consist of several further child nodes
-  to allow grouping multiple pinctrl groups into one. The format of second
-  level child nodes is exactly the same as for first level ones and is
-  described below.
-
-  The child node should contain a list of pin(s) on which a particular pin
-  function selection or pin configuration (or both) have to applied. This
-  list of pins is specified using the property name "samsung,pins". There
-  should be atleast one pin specfied for this property and there is no upper
-  limit on the count of pins that can be specified. The pins are specified
-  using pin names which are derived from the hardware manual of the SoC. As
-  an example, the pins in GPA0 bank of the pin controller can be represented
-  as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case.
-  The format of the pin names should be (as per the hardware manual)
-  "[pin bank name]-[pin number within the bank]".
-
-  The pin function selection that should be applied on the pins listed in the
-  child node is specified using the "samsung,pin-function" property. The value
-  of this property that should be applied to each of the pins listed in the
-  "samsung,pins" property should be picked from the hardware manual of the SoC
-  for the specified pin group. This property is optional in the child node if
-  no specific function selection is desired for the pins listed in the child
-  node. The value of this property is used as-is to program the pin-controller
-  function selector register of the pin-bank.
-
-  The child node can also optionally specify one or more of the pin
-  configuration that should be applied on all the pins listed in the
-  "samsung,pins" property of the child node. The following pin configuration
-  properties are supported.
-
-  - samsung,pin-val: Initial value of pin output buffer.
-  - samsung,pin-pud: Pull up/down configuration.
-  - samsung,pin-drv: Drive strength configuration.
-  - samsung,pin-pud-pdn: Pull up/down configuration in power down mode.
-  - samsung,pin-drv-pdn: Drive strength configuration in power down mode.
-
-  The values specified by these config properties should be derived from the
-  hardware manual and these values are programmed as-is into the pin
-  pull up/down and driver strength register of the pin-controller.
-
-  Note: A child should include atleast a pin function selection property or
-  pin configuration property (one or more) or both.
-
-  The client nodes that require a particular pin function selection and/or
-  pin configuration should use the bindings listed in the "pinctrl-bindings.txt"
-  file.
-
-External GPIO and Wakeup Interrupts:
-
-The controller supports two types of external interrupts over gpio. The first
-is the external gpio interrupt and second is the external wakeup interrupts.
-The difference between the two is that the external wakeup interrupts can be
-used as system wakeup events.
-
-A. External GPIO Interrupts: For supporting external gpio interrupts, the
-   following properties should be specified in the pin-controller device node.
-
-   - interrupts: interrupt specifier for the controller. The format and value of
-     the interrupt specifier depends on the interrupt parent for the controller.
-
-   In addition, following properties must be present in node of every bank
-   of pins supporting GPIO interrupts:
-
-   - interrupt-controller: identifies the controller node as interrupt-parent.
-   - #interrupt-cells: the value of this property should be 2.
-     - First Cell: represents the external gpio interrupt number local to the
-       external gpio interrupt space of the controller.
-     - Second Cell: flags to identify the type of the interrupt
-       - 1 = rising edge triggered
-       - 2 = falling edge triggered
-       - 3 = rising and falling edge triggered
-       - 4 = high level triggered
-       - 8 = low level triggered
-
-B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
-   child node representing the external wakeup interrupt controller should be
-   included in the pin-controller device node.
-
-   Only one pin-controller device node can include external wakeup interrupts
-   child node (in other words, only one External Wakeup Interrupts
-   pin-controller is supported).
-
-   This child node should include following properties:
-
-   - compatible: identifies the type of the external wakeup interrupt controller
-     The possible values are:
-     - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
-     - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung S3C2412 and S3C2413 SoCs,
-     - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung S3C64xx SoCs,
-     - samsung,s5pv210-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung S5Pv210 SoCs,
-     - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs.
-     - samsung,exynos7-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung Exynos7 SoC.
-   - interrupts: interrupt used by multiplexed wakeup interrupts.
-
-   In addition, following properties must be present in node of every bank
-   of pins supporting wake-up interrupts:
-
-   - interrupt-controller: identifies the node as interrupt-parent.
-   - #interrupt-cells: the value of this property should be 2
-     - First Cell: represents the external wakeup interrupt number local to
-       the external wakeup interrupt space of the controller.
-     - Second Cell: flags to identify the type of the interrupt
-       - 1 = rising edge triggered
-       - 2 = falling edge triggered
-       - 3 = rising and falling edge triggered
-       - 4 = high level triggered
-       - 8 = low level triggered
-
-   Node of every bank of pins supporting direct wake-up interrupts (without
-   multiplexing) must contain following properties:
-
-   - interrupts: interrupts of the interrupt parent which are used for external
-     wakeup interrupts from pins of the bank, must contain interrupts for all
-     pins of the bank.
-
-Aliases:
-
-All the pin controller nodes should be represented in the aliases node using
-the following format 'pinctrl{n}' where n is a unique number for the alias.
-
-Aliases for controllers compatible with "samsung,exynos7-pinctrl":
-- pinctrl0: pin controller of ALIVE block,
-- pinctrl1: pin controller of BUS0 block,
-- pinctrl2: pin controller of NFC block,
-- pinctrl3: pin controller of TOUCH block,
-- pinctrl4: pin controller of FF block,
-- pinctrl5: pin controller of ESE block,
-- pinctrl6: pin controller of FSYS0 block,
-- pinctrl7: pin controller of FSYS1 block,
-- pinctrl8: pin controller of BUS1 block,
-- pinctrl9: pin controller of AUDIO block,
-
-Example: A pin-controller node with pin banks:
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
-
-		/* ... */
-
-		/* Pin bank without external interrupts */
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		/* ... */
-
-		/* Pin bank with external GPIO or muxed wake-up interrupts */
-		gpj0: gpj0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		/* ... */
-
-		/* Pin bank with external direct wake-up interrupts */
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
-			#interrupt-cells = <2>;
-		};
-
-		/* ... */
-	};
-
-Example 1: A pin-controller node with pin groups.
-
-	#include <dt-bindings/pinctrl/samsung.h>
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
-
-		/* ... */
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		sd4_bus8: sd4-bus-width8 {
-			part-1 {
-				samsung,pins = "gpk0-3", "gpk0-4",
-						"gpk0-5", "gpk0-6";
-				samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-				samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-				samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-			};
-			part-2 {
-				samsung,pins = "gpk1-3", "gpk1-4",
-						"gpk1-5", "gpk1-6";
-				samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-				samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-				samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-			};
-		};
-	};
-
-Example 2: A pin-controller node with external wakeup interrupt controller node.
-
-	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>
-
-		/* ... */
-
-		wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
-		};
-	};
-
-Example 3: A uart client node that supports 'default' and 'flow-control' states.
-
-	uart@13800000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13800000 0x100>;
-		interrupts = <0 52 0>;
-		pinctrl-names = "default", "flow-control;
-		pinctrl-0 = <&uart0_data>;
-		pinctrl-1 = <&uart0_data &uart0_fctl>;
-	};
-
-Example 4: Set up the default pin state for uart controller.
-
-	static int s3c24xx_serial_probe(struct platform_device *pdev) {
-		struct pinctrl *pinctrl;
-
-		/* ... */
-
-		pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	}
-
-Example 5: A display port client node that supports 'default' pinctrl state
-	   and gpio binding.
-
-	display-port-controller {
-		/* ... */
-
-		samsung,hpd-gpio = <&gpx2 6 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_hpd>;
-	};
-
-Example 6: Request the gpio for display port controller
-
-	static int exynos_dp_probe(struct platform_device *pdev)
-	{
-		int hpd_gpio, ret;
-		struct device *dev = &pdev->dev;
-		struct device_node *dp_node = dev->of_node;
-
-		/* ... */
-
-		hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0);
-
-		/* ... */
-
-		ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN,
-					    "hpd_gpio");
-		/* ... */
-	}
diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt
deleted file mode 100644
index 8173b12138ad..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-UniPhier SoCs pin controller
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-pinctrl"  - for LD4 SoC
-    "socionext,uniphier-pro4-pinctrl" - for Pro4 SoC
-    "socionext,uniphier-sld8-pinctrl" - for sLD8 SoC
-    "socionext,uniphier-pro5-pinctrl" - for Pro5 SoC
-    "socionext,uniphier-pxs2-pinctrl" - for PXs2 SoC
-    "socionext,uniphier-ld6b-pinctrl" - for LD6b SoC
-    "socionext,uniphier-ld11-pinctrl" - for LD11 SoC
-    "socionext,uniphier-ld20-pinctrl" - for LD20 SoC
-    "socionext,uniphier-pxs3-pinctrl" - for PXs3 SoC
-
-Note:
-The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
-
-Example:
-	soc-glue@5f800000 {
-		compatible = "socionext,uniphier-pro4-soc-glue",
-			     "simple-mfd", "syscon";
-		reg = <0x5f800000 0x2000>;
-
-		pinctrl: pinctrl {
-			compatible = "socionext,uniphier-pro4-pinctrl";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
new file mode 100644
index 000000000000..14a8c0215cc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/socionext,uniphier-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier SoCs pin controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-ld4-pinctrl
+      - socionext,uniphier-pro4-pinctrl
+      - socionext,uniphier-sld8-pinctrl
+      - socionext,uniphier-pro5-pinctrl
+      - socionext,uniphier-pxs2-pinctrl
+      - socionext,uniphier-ld6b-pinctrl
+      - socionext,uniphier-ld11-pinctrl
+      - socionext,uniphier-ld20-pinctrl
+      - socionext,uniphier-pxs3-pinctrl
+      - socionext,uniphier-nx1-pinctrl
+
+additionalProperties:
+  type: object
+
+  allOf:
+    - $ref: pincfg-node.yaml#
+    - $ref: pinmux-node.yaml#
+
+  properties:
+    phandle: true
+    function: true
+    groups: true
+    pins: true
+    bias-pull-up: true
+    bias-pull-down: true
+    bias-pull-pin-default: true
+    drive-strength: true
+
+  additionalProperties:
+    type: object
+
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+    properties:
+      phandle: true
+      function: true
+      groups: true
+      pins: true
+      bias-pull-up: true
+      bias-pull-down: true
+      bias-pull-pin-default: true
+      drive-strength: true
+
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+
+examples:
+  - |
+    // The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
+
+    soc-glue@5f800000 {
+        compatible = "socionext,uniphier-pro4-soc-glue", "simple-mfd", "syscon";
+        reg = <0x5f800000 0x2000>;
+
+        pinctrl: pinctrl {
+            compatible = "socionext,uniphier-pro4-pinctrl";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index ef4de32cb17c..9d59208d83c1 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STM32 GPIO and Pin Mux/Config controller
 
 maintainers:
-  - Alexandre TORGUE <alexandre.torgue@st.com>
+  - Alexandre TORGUE <alexandre.torgue@foss.st.com>
 
 description: |
   STMicroelectronics's STM32 MCUs intregrate a GPIO and Pin mux/config hardware
@@ -24,6 +24,7 @@ properties:
       - st,stm32f746-pinctrl
       - st,stm32f769-pinctrl
       - st,stm32h743-pinctrl
+      - st,stm32mp135-pinctrl
       - st,stm32mp157-pinctrl
       - st,stm32mp157-z-pinctrl
 
@@ -36,38 +37,44 @@ properties:
   pins-are-numbered: true
   hwlocks: true
 
+  interrupts:
+    maxItems: 1
+
   st,syscfg:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
-    description: Should be phandle/offset/mask
-      - Phandle to the syscon node which includes IRQ mux selection.
-      - The offset of the IRQ mux selection register.
-      - The field mask of IRQ mux, needed if different of 0xf.
+    description: Phandle+args to the syscon node which includes IRQ mux selection.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: syscon node which includes IRQ mux selection
+          - description: The offset of the IRQ mux selection register
+          - description: The field mask of IRQ mux, needed if different of 0xf
 
   st,package:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 2, 4, 8]
     description:
-     Indicates the SOC package used.
-     More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
-
+      Indicates the SOC package used.
+      More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
 
 patternProperties:
   '^gpio@[0-9a-f]*$':
     type: object
+    additionalProperties: false
     properties:
       gpio-controller: true
       '#gpio-cells':
         const: 2
+      interrupt-controller: true
+      '#interrupt-cells':
+        const: 2
 
       reg:
         maxItems: 1
       clocks:
         maxItems: 1
-      reset:
-        minItems: 1
+      resets:
         maxItems: 1
+      gpio-line-names: true
       gpio-ranges:
         minItems: 1
         maxItems: 16
@@ -78,33 +85,36 @@ patternProperties:
         maximum: 16
 
       st,bank-name:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/string"
-          - enum:
-            - GPIOA
-            - GPIOB
-            - GPIOC
-            - GPIOD
-            - GPIOE
-            - GPIOF
-            - GPIOG
-            - GPIOH
-            - GPIOI
-            - GPIOJ
-            - GPIOK
-            - GPIOZ
         description:
           Should be a name string for this bank as specified in the datasheet.
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum:
+          - GPIOA
+          - GPIOB
+          - GPIOC
+          - GPIOD
+          - GPIOE
+          - GPIOF
+          - GPIOG
+          - GPIOH
+          - GPIOI
+          - GPIOJ
+          - GPIOK
+          - GPIOZ
 
       st,bank-ioport:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-          - maximum: 11
-
         description:
           Should correspond to the EXTI IOport selection (EXTI line used
           to select GPIOs as interrupts).
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 11
+
+    patternProperties:
+      "^(.+-hog(-[0-9]+)?)$":
+        type: object
+        required:
+          - gpio-hog
 
     required:
       - gpio-controller
@@ -115,9 +125,12 @@ patternProperties:
 
   '-[0-9]*$':
     type: object
+    additionalProperties: false
+
     patternProperties:
       '^pins':
         type: object
+        additionalProperties: false
         description: |
           A pinctrl node should contain at least one subnode representing the
           pinctrl group available on the machine. Each subnode will list the
@@ -125,8 +138,7 @@ patternProperties:
           configuration, pullups, drive, output high/low and output speed.
         properties:
           pinmux:
-            allOf:
-              - $ref: "/schemas/types.yaml#/definitions/uint32-array"
+            $ref: "/schemas/types.yaml#/definitions/uint32-array"
             description: |
               Integer array, represents gpio pin number and mux setting.
               Supported pin number and mux varies for different SoCs, and are
@@ -180,13 +192,15 @@ patternProperties:
               1: Medium speed
               2: Fast speed
               3: High speed
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
-              - enum: [0, 1, 2, 3]
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
 
         required:
           - pinmux
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - '#address-cells'
@@ -194,6 +208,8 @@ required:
   - ranges
   - pins-are-numbered
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/pinctrl/stm32-pinfunc.h>
diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
new file mode 100644
index 000000000000..69c0dd9998ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
@@ -0,0 +1,307 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/starfive,jh7100-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Pin Controller
+
+description: |
+  Bindings for the JH7100 RISC-V SoC from StarFive Ltd.
+
+  Out of the SoC's many pins only the ones named PAD_GPIO[0] to PAD_GPIO[63]
+  and PAD_FUNC_SHARE[0] to PAD_FUNC_SHARE[141] can be multiplexed and have
+  configurable bias, drive strength, schmitt trigger etc. The SoC has an
+  interesting 2-layered approach to pin muxing best illustrated by the diagram
+  below.
+
+                          Signal group 0, 1, ... or 6
+                                 ___|___
+                                |       |
+    LCD output -----------------|       |
+    CMOS Camera interface ------|       |--- PAD_GPIO[0]
+    Ethernet PHY interface -----|  MUX  |--- PAD_GPIO[1]
+      ...                       |       |      ...
+                                |       |--- PAD_GPIO[63]
+     -------- GPIO0 ------------|       |
+    |  -------|-- GPIO1 --------|       |--- PAD_FUNC_SHARE[0]
+    | |       |   |             |       |--- PAD_FUNC_SHARE[1]
+    | |       |   |  ...        |       |       ...
+    | |       |   |             |       |--- PAD_FUNC_SHARE[141]
+    | |  -----|---|-- GPIO63 ---|       |
+    | | |     |   |   |          -------
+    UART0     UART1 --
+
+
+  The big MUX in the diagram only has 7 different ways of mapping peripherals
+  on the left to pins on the right. StarFive calls the 7 configurations "signal
+  groups".
+  However some peripherals have their I/O go through the 64 "GPIOs". The
+  diagram only shows UART0 and UART1, but this also includes a number of other
+  UARTs, I2Cs, SPIs, PWMs etc. All these peripherals are connected to all 64
+  GPIOs such that any GPIO can be set up to be controlled by any of the
+  peripherals.
+  Note that signal group 0 doesn't map any of the GPIOs to pins, and only
+  signal group 1 maps the GPIOs to the pins named PAD_GPIO[0] to PAD_GPIO[63].
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+  - Drew Fustini <drew@beagleboard.org>
+
+properties:
+  compatible:
+    const: starfive,jh7100-pinctrl
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: padctl
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+    description: The GPIO parent interrupt.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  starfive,signal-group:
+    description: |
+      Select one of the 7 signal groups. If this property is not set it
+      defaults to the configuration already chosen by the earlier boot stages.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    patternProperties:
+      '-pins$':
+        type: object
+        description: |
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to
+          muxer configuration, bias, input enable/disable, input schmitt
+          trigger enable/disable, slew-rate and drive strength.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pins:
+            description: |
+              The list of pin identifiers that properties in the node apply to.
+              This should be set using either the PAD_GPIO or PAD_FUNC_SHARE
+              macros.
+              Either this or "pinmux" has to be specified, but not both.
+            $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pins"
+
+          pinmux:
+            description: |
+              The list of GPIOs and their mux settings that properties in the
+              node apply to. This should be set using the GPIOMUX macro.
+              Either this or "pins" has to be specified, but not both.
+            $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pinmux"
+
+          bias-disable: true
+
+          bias-pull-up:
+            type: boolean
+
+          bias-pull-down:
+            type: boolean
+
+          drive-strength:
+            enum: [ 14, 21, 28, 35, 42, 49, 56, 63 ]
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          slew-rate:
+            maximum: 7
+
+          starfive,strong-pull-up:
+            description: enable strong pull-up.
+            type: boolean
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+    #include <dt-bindings/reset/starfive-jh7100.h>
+    #include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pinctrl@11910000 {
+            compatible = "starfive,jh7100-pinctrl";
+            reg = <0x0 0x11910000 0x0 0x10000>,
+                  <0x0 0x11858000 0x0 0x1000>;
+            reg-names = "gpio", "padctl";
+            clocks = <&clkgen JH7100_CLK_GPIO_APB>;
+            resets = <&clkgen JH7100_RSTN_GPIO_APB>;
+            interrupts = <32>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            starfive,signal-group = <6>;
+
+            gmac_pins_default: gmac-0 {
+                gtxclk-pins {
+                    pins = <PAD_FUNC_SHARE(115)>;
+                    bias-pull-up;
+                    drive-strength = <35>;
+                    input-enable;
+                    input-schmitt-enable;
+                    slew-rate = <0>;
+                };
+                miitxclk-pins {
+                    pins = <PAD_FUNC_SHARE(116)>;
+                    bias-pull-up;
+                    drive-strength = <14>;
+                    input-enable;
+                    input-schmitt-disable;
+                    slew-rate = <0>;
+                };
+                tx-pins {
+                    pins = <PAD_FUNC_SHARE(117)>,
+                           <PAD_FUNC_SHARE(119)>,
+                           <PAD_FUNC_SHARE(120)>,
+                           <PAD_FUNC_SHARE(121)>,
+                           <PAD_FUNC_SHARE(122)>,
+                           <PAD_FUNC_SHARE(123)>,
+                           <PAD_FUNC_SHARE(124)>,
+                           <PAD_FUNC_SHARE(125)>,
+                           <PAD_FUNC_SHARE(126)>;
+                    bias-disable;
+                    drive-strength = <35>;
+                    input-disable;
+                    input-schmitt-disable;
+                    slew-rate = <0>;
+                };
+                rxclk-pins {
+                    pins = <PAD_FUNC_SHARE(127)>;
+                    bias-pull-up;
+                    drive-strength = <14>;
+                    input-enable;
+                    input-schmitt-disable;
+                    slew-rate = <6>;
+                };
+                rxer-pins {
+                    pins = <PAD_FUNC_SHARE(129)>;
+                    bias-pull-up;
+                    drive-strength = <14>;
+                    input-enable;
+                    input-schmitt-disable;
+                    slew-rate = <0>;
+                };
+                rx-pins {
+                    pins = <PAD_FUNC_SHARE(128)>,
+                           <PAD_FUNC_SHARE(130)>,
+                           <PAD_FUNC_SHARE(131)>,
+                           <PAD_FUNC_SHARE(132)>,
+                           <PAD_FUNC_SHARE(133)>,
+                           <PAD_FUNC_SHARE(134)>,
+                           <PAD_FUNC_SHARE(135)>,
+                           <PAD_FUNC_SHARE(136)>,
+                           <PAD_FUNC_SHARE(137)>,
+                           <PAD_FUNC_SHARE(138)>,
+                           <PAD_FUNC_SHARE(139)>,
+                           <PAD_FUNC_SHARE(140)>,
+                           <PAD_FUNC_SHARE(141)>;
+                    bias-pull-up;
+                    drive-strength = <14>;
+                    input-enable;
+                    input-schmitt-enable;
+                    slew-rate = <0>;
+                };
+            };
+
+            i2c0_pins_default: i2c0-0 {
+                i2c-pins {
+                    pinmux = <GPIOMUX(62, GPO_LOW,
+                              GPO_I2C0_PAD_SCK_OEN,
+                              GPI_I2C0_PAD_SCK_IN)>,
+                             <GPIOMUX(61, GPO_LOW,
+                              GPO_I2C0_PAD_SDA_OEN,
+                              GPI_I2C0_PAD_SDA_IN)>;
+                    bias-disable; /* external pull-up */
+                    input-enable;
+                    input-schmitt-enable;
+                };
+            };
+
+            uart3_pins_default: uart3-0 {
+                rx-pins {
+                    pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
+                              GPI_UART3_PAD_SIN)>;
+                    bias-pull-up;
+                    input-enable;
+                    input-schmitt-enable;
+                };
+                tx-pins {
+                    pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
+                              GPO_ENABLE, GPI_NONE)>;
+                    bias-disable;
+                    input-disable;
+                    input-schmitt-disable;
+                };
+            };
+        };
+
+        gmac {
+            pinctrl-0 = <&gmac_pins_default>;
+            pinctrl-names = "default";
+        };
+
+        i2c0 {
+            pinctrl-0 = <&i2c0_pins_default>;
+            pinctrl-names = "default";
+        };
+
+        uart3 {
+            pinctrl-0 = <&uart3_pins_default>;
+            pinctrl-names = "default";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
new file mode 100644
index 000000000000..347061eece9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
@@ -0,0 +1,377 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/sunplus,sp7021-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Pin Controller
+
+maintainers:
+  - Dvorkin Dmitry <dvorkin@tibbo.com>
+  - Wells Lu <wellslutw@gmail.com>
+
+description: |
+  The Sunplus SP7021 pin controller is used to control SoC pins. Please
+  refer to pinctrl-bindings.txt in this directory for details of the common
+  pinctrl bindings used by client devices.
+
+  SP7021 has 99 digital GPIO pins which are numbered from GPIO 0 to 98. All
+  are multiplexed with some special function pins. SP7021 has 3 types of
+  special function pins:
+
+  (1) function-group pins:
+      Ex 1 (SPI-NOR flash):
+        If control-field SPI_FLASH_SEL is set to 1, GPIO 83, 84, 86 and 87
+        will be pins of SPI-NOR flash. If it is set to 2, GPIO 76, 78, 79
+        and 81 will be pins of SPI-NOR flash.
+
+      Ex 2 (UART_0):
+        If control-bit UA0_SEL is set to 1, GPIO 88 and 89 will be TX and
+        RX pins of UART_0 (UART channel 0).
+
+      Ex 3 (eMMC):
+        If control-bit EMMC_SEL is set to 1, GPIO 72, 73, 74, 75, 76, 77,
+        78, 79, 80, 81 will be pins of an eMMC device.
+
+      Properties "function" and "groups" are used to select function-group
+      pins.
+
+  (2) fully pin-mux (like phone exchange mux) pins:
+      GPIO 8 to 71 are 'fully pin-mux' pins. Any pins of peripherals of
+      SP7021 (ex: UART_1, UART_2, UART_3, UART_4, I2C_0, I2C_1, and etc.)
+      can be routed to any pins of fully pin-mux pins.
+
+      Ex 1 (UART channel 1):
+        If control-field UA1_TX_SEL is set to 3, TX pin of UART_1 will be
+        routed to GPIO 10 (3 - 1 + 8 = 10).
+        If control-field UA1_RX_SEL is set to 4, RX pin of UART_1 will be
+        routed to GPIO 11 (4 - 1 + 8 = 11).
+        If control-field UA1_RTS_SEL is set to 5, RTS pin of UART_1 will
+        be routed to GPIO 12 (5 - 1 + 8 = 12).
+        If control-field UA1_CTS_SEL is set to 6, CTS pin of UART_1 will
+        be routed to GPIO 13 (6 - 1 + 8 = 13).
+
+      Ex 2 (I2C channel 0):
+        If control-field I2C0_CLK_SEL is set to 20, CLK pin of I2C_0 will
+        be routed to GPIO 27 (20 - 1 + 8 = 27).
+        If control-field I2C0_DATA_SEL is set to 21, DATA pin of I2C_0
+        will be routed to GPIO 28 (21 - 1 + 9 = 28).
+
+      Totally, SP7021 has 120 peripheral pins. The peripheral pins can be
+      routed to any of 64 'fully pin-mux' pins.
+
+  (3) I/O processor pins
+      SP7021 has a built-in I/O processor.
+      Any GPIO pins (GPIO 0 to 98) can be set to pins of I/O processor.
+
+  Vendor property "sunplus,pins" is used to select "fully pin-mux" pins,
+  "I/O processor pins" and "digital GPIO" pins.
+
+  The device node of pin controller of Sunplus SP7021 has following
+  properties.
+
+properties:
+  compatible:
+    const: sunplus,sp7021-pctl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  reg:
+    items:
+      - description: the MOON2 registers
+      - description: the GPIOXT registers
+      - description: the FIRST registers
+      - description: the MOON1 registers
+
+  reg-names:
+    items:
+      - const: moon2
+      - const: gpioxt
+      - const: first
+      - const: moon1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    description: |
+      A pinctrl node should contain at least one subnodes representing the
+      pins or function-pins group available on the machine. Each subnode
+      will list the pins it needs, and how they should be configured.
+
+      Pinctrl node's client devices use subnodes for desired pin
+      configuration. Client device subnodes use below standard properties.
+    $ref: pinmux-node.yaml#
+
+    properties:
+      sunplus,pins:
+        description: |
+          Define 'sunplus,pins' which are used by pinctrl node's client
+          device.
+
+          It consists of one or more integers which represents the config
+          setting for corresponding pin. Each integer defines a individual
+          pin in which:
+
+          Bit 32~24: defines GPIO number. Its range is 0 ~ 98.
+          Bit 23~16: defines types: (1) fully pin-mux pins
+                                    (2) IO processor pins
+                                    (3) digital GPIO pins
+          Bit 15~8:  defines pins of peripherals (which are defined in
+                     'include/dt-binging/pinctrl/sppctl.h').
+          Bit 7~0:   defines types or initial-state of digital GPIO pins.
+
+          Please use macro SPPCTL_IOPAD to define the integers for pins.
+
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      function:
+        description: |
+          Define pin-function which is used by pinctrl node's client device.
+          The name should be one of string in the following enumeration.
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD,
+                UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ]
+
+      groups:
+        description: |
+          Define pin-group in a specified pin-function.
+          The name should be one of string in the following enumeration.
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2,
+                SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1,
+                HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ]
+
+      sunplus,zerofunc:
+        description: |
+          This is a vendor specific property. It is used to disable pins
+          which are not used by pinctrl node's client device.
+          Some pins may be enabled by boot-loader. We can use this
+          property to disable them.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+    additionalProperties: false
+
+    allOf:
+      - if:
+          properties:
+            function:
+              enum:
+                - SPI_FLASH
+        then:
+          properties:
+            groups:
+              enum:
+                - SPI_FLASH1
+                - SPI_FLASH2
+      - if:
+          properties:
+            function:
+              enum:
+                - SPI_FLASH_4BIT
+        then:
+          properties:
+            groups:
+              enum:
+                - SPI_FLASH_4BIT1
+                - SPI_FLASH_4BIT2
+      - if:
+          properties:
+            function:
+              enum:
+                - SPI_NAND
+        then:
+          properties:
+            groups:
+              enum:
+                - SPI_NAND
+      - if:
+          properties:
+            function:
+              enum:
+                - CARD0_EMMC
+        then:
+          properties:
+            groups:
+              enum:
+                - CARD0_EMMC
+      - if:
+          properties:
+            function:
+              enum:
+                - SD_CARD
+        then:
+          properties:
+            groups:
+              enum:
+                - SD_CARD
+      - if:
+          properties:
+            function:
+              enum:
+                - UA0
+        then:
+          properties:
+            groups:
+              enum:
+                - UA0
+      - if:
+          properties:
+            function:
+              enum:
+                - FPGA_IFX
+        then:
+          properties:
+            groups:
+              enum:
+                - FPGA_IFX
+      - if:
+          properties:
+            function:
+              enum:
+                - HDMI_TX
+        then:
+          properties:
+            groups:
+              enum:
+                - HDMI_TX1
+                - HDMI_TX2
+                - HDMI_TX3
+      - if:
+          properties:
+            function:
+              enum:
+                - LCDIF
+        then:
+          properties:
+            groups:
+              enum:
+                - LCDIF
+      - if:
+          properties:
+            function:
+              enum:
+                - USB0_OTG
+        then:
+          properties:
+            groups:
+              enum:
+                - USB0_OTG
+      - if:
+          properties:
+            function:
+              enum:
+                - USB1_OTG
+        then:
+          properties:
+            groups:
+              enum:
+                - USB1_OTG
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#gpio-cells"
+  - gpio-controller
+  - clocks
+  - resets
+
+additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/sppctl-sp7021.h>
+
+    pinctrl@9c000100 {
+        compatible = "sunplus,sp7021-pctl";
+        reg = <0x9c000100 0x100>, <0x9c000300 0x100>,
+              <0x9c0032e4 0x1c>, <0x9c000080 0x20>;
+        reg-names = "moon2", "gpioxt", "first", "moon1";
+        gpio-controller;
+        #gpio-cells = <2>;
+        clocks = <&clkc 0x83>;
+        resets = <&rstc 0x73>;
+
+        uart0-pins {
+            function = "UA0";
+            groups = "UA0";
+        };
+
+        spinand0-pins {
+            function = "SPI_NAND";
+            groups = "SPI_NAND";
+        };
+
+        uart1-pins {
+            sunplus,pins = <
+                SPPCTL_IOPAD(11, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
+                SPPCTL_IOPAD(10, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
+            >;
+        };
+
+        uart2-pins {
+            sunplus,pins = <
+                SPPCTL_IOPAD(20, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
+                SPPCTL_IOPAD(21, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
+                SPPCTL_IOPAD(22, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RTS, 0)
+                SPPCTL_IOPAD(23, SPPCTL_PCTL_G_PMUX, MUXF_UA1_CTS, 0)
+            >;
+        };
+
+        emmc-pins {
+            function = "CARD0_EMMC";
+            groups = "CARD0_EMMC";
+        };
+
+        sdcard-pins {
+            function = "SD_CARD";
+            groups = "SD_CARD";
+            sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
+        };
+
+        hdmi_A_tx1-pins {
+            function = "HDMI_TX";
+            groups = "HDMI_TX1";
+        };
+        hdmi_A_tx2-pins {
+            function = "HDMI_TX";
+            groups = "HDMI_TX2";
+        };
+        hdmi_A_tx3-pins {
+            function = "HDMI_TX";
+            groups = "HDMI_TX3";
+        };
+
+        ethernet-pins {
+            sunplus,pins = <
+                SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
+                SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
+                SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
+                SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
+                SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
+                SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
+                SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
+                SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
+                SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
+            >;
+            sunplus,zerofunc = <
+                MUXF_L2SW_LED_FLASH0
+                MUXF_L2SW_LED_ON0
+                MUXF_L2SW_P0_MAC_RMII_RXER
+            >;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
new file mode 100644
index 000000000000..98b4663f9766
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/toshiba,visconti-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti TMPV770x pin mux/config controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshiba's Visconti ARM SoC a pin mux/config controller.
+
+properties:
+  compatible:
+    enum:
+      - toshiba,tmpv7708-pinctrl
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  '-pins$':
+    type: object
+    description: |
+      A pinctrl node should contain at least one subnodes representing the
+      pinctrl groups available on the machine. Each subnode will list the
+      pins it needs, and how they should be configured, with regard to muxer
+      configuration, pullups, drive strength.
+    $ref: "pinmux-node.yaml"
+    additionalProperties: false
+
+    properties:
+      function:
+        description:
+          Function to mux.
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8,
+               spi0, spi1, spi2, spi3, spi4, spi5, spi6,
+               uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in]
+
+      groups:
+        description:
+          Name of the pin group to use for the functions.
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
+               i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
+               spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
+               spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
+               uart0_grp, uart1_grp, uart2_grp, uart3_grp,
+               pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
+               pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
+               pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
+               pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
+               pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
+               pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 16, 24, 32]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-up: true
+
+      bias-pull-down: true
+
+      bias-disable: true
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pmux: pinmux@24190000 {
+            compatible = "toshiba,tmpv7708-pinctrl";
+            reg = <0 0x24190000 0 0x10000>;
+
+            spi0_pins: spi0-pins {
+                function = "spi0";
+                groups = "spi0_grp";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
deleted file mode 100644
index f488b0f77406..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
+++ /dev/null
@@ -1,105 +0,0 @@
-	Binding for Xilinx Zynq Pinctrl
-
-Required properties:
-- compatible: "xlnx,zynq-pinctrl"
-- syscon: phandle to SLCR
-- reg: Offset and length of pinctrl space in SLCR
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Zynq's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, slew rate, etc.
-
-Each configuration node can consist of multiple nodes describing the pinmux and
-pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Required properties for pinmux nodes are:
- - groups: A list of pinmux groups.
- - function: The name of a pinmux function to activate for the specified set
-   of groups.
-
-Required properties for configuration nodes:
-One of:
- - pins: a list of pin names
- - groups: A list of pinmux groups.
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pinmux subnode:
- groups, function
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pinconf subnode:
- groups, pins, bias-disable, bias-high-impedance, bias-pull-up, slew-rate,
- low-power-disable, low-power-enable
-
- Valid arguments for 'slew-rate' are '0' and '1' to select between slow and fast
- respectively.
-
- Valid values for groups are:
-   ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, mdio1_0_grp,
-   qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp - spi0_2_grp,
-   spi0_X_ssY (X=0..2, Y=0..2), spi1_0_grp - spi1_3_grp,
-   spi1_X_ssY (X=0..3, Y=0..2), sdio0_0_grp - sdio0_2_grp,
-   sdio1_0_grp - sdio1_3_grp, sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp,
-   sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, smc0_nor_addr25_grp, smc0_nand,
-   can0_0_grp - can0_10_grp, can1_0_grp - can1_11_grp, uart0_0_grp - uart0_10_grp,
-   uart1_0_grp - uart1_11_grp, i2c0_0_grp - i2c0_10_grp, i2c1_0_grp - i2c1_10_grp,
-   ttc0_0_grp - ttc0_2_grp, ttc1_0_grp - ttc1_2_grp, swdt0_0_grp - swdt0_4_grp,
-   gpio0_0_grp - gpio0_53_grp, usb0_0_grp, usb1_0_grp
-
- Valid values for pins are:
-   MIO0 - MIO53
-
- Valid values for function are:
-   ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, qspi_cs1,
-   spi0, spi0_ss, spi1, spi1_ss, sdio0, sdio0_pc, sdio0_cd, sdio0_wp,
-   sdio1, sdio1_pc, sdio1_cd, sdio1_wp,
-   smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, can1, uart0, uart1,
-   i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, usb0, usb1
-
-The following driver-specific properties as defined here are valid to specify in
-a pin configuration subnode:
- - io-standard: Configure the pin to use the selected IO standard according to
-   this mapping:
-    1: LVCMOS18
-    2: LVCMOS25
-    3: LVCMOS33
-    4: HSTL
-
-Example:
-	pinctrl0: pinctrl@700 {
-		compatible = "xlnx,pinctrl-zynq";
-		reg = <0x700 0x200>;
-		syscon = <&slcr>;
-
-		pinctrl_uart1_default: uart1-default {
-			mux {
-				groups = "uart1_10_grp";
-				function = "uart1";
-			};
-
-			conf {
-				groups = "uart1_10_grp";
-				slew-rate = <0>;
-				io-standard = <1>;
-			};
-
-			conf-rx {
-				pins = "MIO49";
-				bias-high-impedance;
-			};
-
-			conf-tx {
-				pins = "MIO48";
-				bias-disable;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
new file mode 100644
index 000000000000..cfd0cc549a7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/xlnx,zynq-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Pinctrl
+
+maintainers:
+  - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
+
+description: |
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of the
+  phrase "pin configuration node".
+
+  Zynq's pin configuration nodes act as a container for an arbitrary number of
+  subnodes. Each of these subnodes represents some desired configuration for a
+  pin, a group, or a list of pins or groups. This configuration can include the
+  mux function to select on those pin(s)/group(s), and various pin configuration
+  parameters, such as pull-up, slew rate, etc.
+
+  Each configuration node can consist of multiple nodes describing the pinmux and
+  pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
+
+  The name of each subnode is not important; all subnodes should be enumerated
+  and processed purely based on their content.
+
+properties:
+  compatible:
+    const: xlnx,zynq-pinctrl
+
+  reg:
+    description: Specifies the base address and size of the SLCR space.
+    maxItems: 1
+
+  syscon:
+    description:
+      phandle to the SLCR.
+
+patternProperties:
+  '^(.*-)?(default|gpio)$':
+    type: object
+    patternProperties:
+      '^mux':
+        type: object
+        description:
+          Pinctrl node's client devices use subnodes for pin muxes,
+          which in turn use below standard properties.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of groups to select (either this or "pins" must be
+              specified), available groups for this subnode.
+            items:
+              enum: [ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp,
+                     mdio1_0_grp, qspi0_0_grp, qspi1_0_grp, qspi_fbclk,
+                     qspi_cs1_grp, spi0_0_grp, spi0_1_grp, spi0_2_grp,
+                     spi0_0_ss0, spi0_0_ss1, spi0_0_ss2, spi0_1_ss0,
+                     spi0_1_ss1, spi0_1_ss2, spi0_2_ss0, spi0_2_ss1,
+                     spi0_2_ss2, spi1_0_grp, spi1_1_grp, spi1_2_grp,
+                     spi1_3_grp, spi1_0_ss0, spi1_0_ss1, spi1_0_ss2,
+                     spi1_1_ss0, spi1_1_ss1, spi1_1_ss2, spi1_2_ss0,
+                     spi1_2_ss1, spi1_2_ss2, spi1_3_ss0, spi1_3_ss1,
+                     spi1_3_ss2, sdio0_0_grp, sdio0_1_grp, sdio0_2_grp,
+                     sdio1_0_grp, sdio1_1_grp, sdio1_2_grp, sdio1_3_grp,
+                     sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp,
+                     sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp,
+                     smc0_nor_addr25_grp, smc0_nand, can0_0_grp, can0_1_grp,
+                     can0_2_grp, can0_3_grp, can0_4_grp, can0_5_grp,
+                     can0_6_grp, can0_7_grp, can0_8_grp, can0_9_grp,
+                     can0_10_grp, can1_0_grp, can1_1_grp, can1_2_grp,
+                     can1_3_grp, can1_4_grp, can1_5_grp, can1_6_grp,
+                     can1_7_grp, can1_8_grp, can1_9_grp, can1_10_grp,
+                     can1_11_grp, uart0_0_grp, uart0_1_grp, uart0_2_grp,
+                     uart0_3_grp, uart0_4_grp, uart0_5_grp, uart0_6_grp,
+                     uart0_7_grp, uart0_8_grp, uart0_9_grp, uart0_10_grp,
+                     uart1_0_grp, uart1_1_grp, uart1_2_grp, uart1_3_grp,
+                     uart1_4_grp, uart1_5_grp, uart1_6_grp, uart1_7_grp,
+                     uart1_8_grp, uart1_9_grp, uart1_10_grp, uart1_11_grp,
+                     i2c0_0_grp, i2c0_1_grp, i2c0_2_grp, i2c0_3_grp,
+                     i2c0_4_grp, i2c0_5_grp, i2c0_6_grp, i2c0_7_grp,
+                     i2c0_8_grp, i2c0_9_grp, i2c0_10_grp, i2c1_0_grp,
+                     i2c1_1_grp, i2c1_2_grp, i2c1_3_grp, i2c1_4_grp,
+                     i2c1_5_grp, i2c1_6_grp, i2c1_7_grp, i2c1_8_grp,
+                     i2c1_9_grp, i2c1_10_grp, ttc0_0_grp, ttc0_1_grp,
+                     ttc0_2_grp, ttc1_0_grp, ttc1_1_grp, ttc1_2_grp,
+                     swdt0_0_grp, swdt0_1_grp, swdt0_2_grp, swdt0_3_grp,
+                     swdt0_4_grp, gpio0_0_grp, gpio0_1_grp, gpio0_2_grp,
+                     gpio0_3_grp, gpio0_4_grp, gpio0_5_grp, gpio0_6_grp,
+                     gpio0_7_grp, gpio0_8_grp, gpio0_9_grp, gpio0_10_grp,
+                     gpio0_11_grp, gpio0_12_grp, gpio0_13_grp, gpio0_14_grp,
+                     gpio0_15_grp, gpio0_16_grp, gpio0_17_grp, gpio0_18_grp,
+                     gpio0_19_grp, gpio0_20_grp, gpio0_21_grp, gpio0_22_grp,
+                     gpio0_23_grp, gpio0_24_grp, gpio0_25_grp, gpio0_26_grp,
+                     gpio0_27_grp, gpio0_28_grp, gpio0_29_grp, gpio0_30_grp,
+                     gpio0_31_grp, gpio0_32_grp, gpio0_33_grp, gpio0_34_grp,
+                     gpio0_35_grp, gpio0_36_grp, gpio0_37_grp, gpio0_38_grp,
+                     gpio0_39_grp, gpio0_40_grp, gpio0_41_grp, gpio0_42_grp,
+                     gpio0_43_grp, gpio0_44_grp, gpio0_45_grp, gpio0_46_grp,
+                     gpio0_47_grp, gpio0_48_grp, gpio0_49_grp, gpio0_50_grp,
+                     gpio0_51_grp, gpio0_52_grp, gpio0_53_grp, usb0_0_grp,
+                     usb1_0_grp]
+            maxItems: 54
+
+          function:
+            description:
+              Specify the alternative function to be configured for the
+              given pin groups.
+            enum: [ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk,
+                   qspi_cs1, spi0, spi0_ss, spi1, spi1_ss, sdio0, sdio0_pc,
+                   sdio0_cd, sdio0_wp, sdio1, sdio1_pc, sdio1_cd, sdio1_wp,
+                   smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0,
+                   can1, uart0, uart1, i2c0, i2c1, ttc0, ttc1, swdt0, gpio0,
+                   usb0, usb1]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+      '^conf':
+        type: object
+        description:
+          Pinctrl node's client devices use subnodes for pin configurations,
+          which in turn use the standard properties below.
+        $ref: pincfg-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of pin groups as mentioned above.
+
+          pins:
+            description:
+              List of pin names to select in this subnode.
+            items:
+              pattern: '^MIO([0-9]|[1-4][0-9]|5[0-3])$'
+            maxItems: 54
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          bias-disable: true
+
+          bias-high-impedance: true
+
+          low-power-enable: true
+
+          low-power-disable: true
+
+          slew-rate:
+            enum: [0, 1]
+
+          power-source:
+            enum: [1, 2, 3, 4]
+
+        oneOf:
+          - required: [ groups ]
+          - required: [ pins ]
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-zynq.h>
+    pinctrl0: pinctrl@700 {
+       compatible = "xlnx,zynq-pinctrl";
+       reg = <0x700 0x200>;
+       syscon = <&slcr>;
+
+       pinctrl_uart1_default: uart1-default {
+           mux {
+               groups = "uart1_10_grp";
+               function = "uart1";
+           };
+
+           conf {
+               groups = "uart1_10_grp";
+               slew-rate = <0>;
+               power-source = <IO_STANDARD_LVCMOS18>;
+           };
+
+           conf-rx {
+               pins = "MIO49";
+               bias-high-impedance;
+           };
+
+           conf-tx {
+               pins = "MIO48";
+               bias-disable;
+           };
+       };
+    };
+
+    uart1 {
+         pinctrl-names = "default";
+         pinctrl-0 = <&pinctrl_uart1_default>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
new file mode 100644
index 000000000000..2722dc7bb03d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
@@ -0,0 +1,339 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP Pinctrl
+
+maintainers:
+  - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
+  - Rajan Vaja <rajan.vaja@xilinx.com>
+
+description: |
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of the
+  phrase "pin configuration node".
+
+  ZynqMP's pin configuration nodes act as a container for an arbitrary number of
+  subnodes. Each of these subnodes represents some desired configuration for a
+  pin, a group, or a list of pins or groups. This configuration can include the
+  mux function to select on those pin(s)/group(s), and various pin configuration
+  parameters, such as pull-up, slew rate, etc.
+
+  Each configuration node can consist of multiple nodes describing the pinmux and
+  pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
+
+  The name of each subnode is not important; all subnodes should be enumerated
+  and processed purely based on their content.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-pinctrl
+
+patternProperties:
+  '^(.*-)?(default|gpio)$':
+    type: object
+    patternProperties:
+      '^mux':
+        type: object
+        description:
+          Pinctrl node's client devices use subnodes for pin muxes,
+          which in turn use below standard properties.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of groups to select (either this or "pins" must be
+              specified), available groups for this subnode.
+            items:
+              enum: [ethernet0_0_grp, ethernet1_0_grp, ethernet2_0_grp,
+                     ethernet3_0_grp, gemtsu0_0_grp, gemtsu0_1_grp,
+                     gemtsu0_2_grp, mdio0_0_grp, mdio1_0_grp,
+                     mdio1_1_grp, mdio2_0_grp, mdio3_0_grp,
+                     qspi0_0_grp, qspi_ss_0_grp, qspi_fbclk_0_grp,
+                     spi0_0_grp, spi0_ss_0_grp, spi0_ss_1_grp,
+                     spi0_ss_2_grp, spi0_1_grp, spi0_ss_3_grp,
+                     spi0_ss_4_grp, spi0_ss_5_grp, spi0_2_grp,
+                     spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp,
+                     spi0_3_grp, spi0_ss_9_grp, spi0_ss_10_grp,
+                     spi0_ss_11_grp, spi0_4_grp, spi0_ss_12_grp,
+                     spi0_ss_13_grp, spi0_ss_14_grp, spi0_5_grp,
+                     spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp,
+                     spi1_0_grp, spi1_ss_0_grp, spi1_ss_1_grp,
+                     spi1_ss_2_grp, spi1_1_grp, spi1_ss_3_grp,
+                     spi1_ss_4_grp, spi1_ss_5_grp, spi1_2_grp,
+                     spi1_ss_6_grp, spi1_ss_7_grp, spi1_ss_8_grp,
+                     spi1_3_grp, spi1_ss_9_grp, spi1_ss_10_grp,
+                     spi1_ss_11_grp, spi1_4_grp, spi1_ss_12_grp,
+                     spi1_ss_13_grp, spi1_ss_14_grp, spi1_5_grp,
+                     spi1_ss_15_grp, spi1_ss_16_grp, spi1_ss_17_grp,
+                     sdio0_0_grp, sdio0_1_grp, sdio0_2_grp,
+                     sdio0_3_grp, sdio0_4_grp, sdio0_5_grp,
+                     sdio0_6_grp, sdio0_7_grp, sdio0_8_grp,
+                     sdio0_9_grp, sdio0_10_grp, sdio0_11_grp,
+                     sdio0_12_grp, sdio0_13_grp, sdio0_14_grp,
+                     sdio0_15_grp, sdio0_16_grp, sdio0_17_grp,
+                     sdio0_18_grp, sdio0_19_grp, sdio0_20_grp,
+                     sdio0_21_grp, sdio0_22_grp, sdio0_23_grp,
+                     sdio0_24_grp, sdio0_25_grp, sdio0_26_grp,
+                     sdio0_27_grp, sdio0_28_grp, sdio0_29_grp,
+                     sdio0_30_grp, sdio0_31_grp, sdio0_32_grp,
+                     sdio0_pc_0_grp, sdio0_cd_0_grp, sdio0_wp_0_grp,
+                     sdio0_pc_1_grp, sdio0_cd_1_grp, sdio0_wp_1_grp,
+                     sdio0_pc_2_grp, sdio0_cd_2_grp, sdio0_wp_2_grp,
+                     sdio1_0_grp, sdio1_1_grp, sdio1_2_grp,
+                     sdio1_3_grp, sdio1_4_grp, sdio1_5_grp,
+                     sdio1_6_grp, sdio1_7_grp, sdio1_8_grp,
+                     sdio1_9_grp, sdio1_10_grp, sdio1_11_grp,
+                     sdio1_12_grp, sdio1_13_grp, sdio1_14_grp,
+                     sdio1_15_grp, sdio1_pc_0_grp, sdio1_cd_0_grp,
+                     sdio1_wp_0_grp, sdio1_pc_1_grp, sdio1_cd_1_grp,
+                     sdio1_wp_1_grp, nand0_0_grp, nand0_ce_0_grp,
+                     nand0_rb_0_grp, nand0_dqs_0_grp, nand0_ce_1_grp,
+                     nand0_rb_1_grp, nand0_dqs_1_grp, can0_0_grp,
+                     can0_1_grp, can0_2_grp, can0_3_grp,
+                     can0_4_grp, can0_5_grp, can0_6_grp,
+                     can0_7_grp, can0_8_grp, can0_9_grp,
+                     can0_10_grp, can0_11_grp, can0_12_grp,
+                     can0_13_grp, can0_14_grp, can0_15_grp,
+                     can0_16_grp, can0_17_grp, can0_18_grp,
+                     can1_0_grp, can1_1_grp, can1_2_grp,
+                     can1_3_grp, can1_4_grp, can1_5_grp,
+                     can1_6_grp, can1_7_grp, can1_8_grp,
+                     can1_9_grp, can1_10_grp, can1_11_grp,
+                     can1_12_grp, can1_13_grp, can1_14_grp,
+                     can1_15_grp, can1_16_grp, can1_17_grp,
+                     can1_18_grp, can1_19_grp, uart0_0_grp,
+                     uart0_1_grp, uart0_2_grp, uart0_3_grp,
+                     uart0_4_grp, uart0_5_grp, uart0_6_grp,
+                     uart0_7_grp, uart0_8_grp, uart0_9_grp,
+                     uart0_10_grp, uart0_11_grp, uart0_12_grp,
+                     uart0_13_grp, uart0_14_grp, uart0_15_grp,
+                     uart0_16_grp, uart0_17_grp, uart0_18_grp,
+                     uart1_0_grp, uart1_1_grp, uart1_2_grp,
+                     uart1_3_grp, uart1_4_grp, uart1_5_grp,
+                     uart1_6_grp, uart1_7_grp, uart1_8_grp,
+                     uart1_9_grp, uart1_10_grp, uart1_11_grp,
+                     uart1_12_grp, uart1_13_grp, uart1_14_grp,
+                     uart1_15_grp, uart1_16_grp, uart1_17_grp,
+                     uart1_18_grp, i2c0_0_grp, i2c0_1_grp,
+                     i2c0_2_grp, i2c0_3_grp, i2c0_4_grp,
+                     i2c0_5_grp, i2c0_6_grp, i2c0_7_grp,
+                     i2c0_8_grp, i2c0_9_grp, i2c0_10_grp,
+                     i2c0_11_grp, i2c0_12_grp, i2c0_13_grp,
+                     i2c0_14_grp, i2c0_15_grp, i2c0_16_grp,
+                     i2c0_17_grp, i2c0_18_grp, i2c1_0_grp,
+                     i2c1_1_grp, i2c1_2_grp, i2c1_3_grp,
+                     i2c1_4_grp, i2c1_5_grp, i2c1_6_grp,
+                     i2c1_7_grp, i2c1_8_grp, i2c1_9_grp,
+                     i2c1_10_grp, i2c1_11_grp, i2c1_12_grp,
+                     i2c1_13_grp, i2c1_14_grp, i2c1_15_grp,
+                     i2c1_16_grp, i2c1_17_grp, i2c1_18_grp,
+                     i2c1_19_grp, ttc0_clk_0_grp, ttc0_wav_0_grp,
+                     ttc0_clk_1_grp, ttc0_wav_1_grp, ttc0_clk_2_grp,
+                     ttc0_wav_2_grp, ttc0_clk_3_grp, ttc0_wav_3_grp,
+                     ttc0_clk_4_grp, ttc0_wav_4_grp, ttc0_clk_5_grp,
+                     ttc0_wav_5_grp, ttc0_clk_6_grp, ttc0_wav_6_grp,
+                     ttc0_clk_7_grp, ttc0_wav_7_grp, ttc0_clk_8_grp,
+                     ttc0_wav_8_grp, ttc1_clk_0_grp, ttc1_wav_0_grp,
+                     ttc1_clk_1_grp, ttc1_wav_1_grp, ttc1_clk_2_grp,
+                     ttc1_wav_2_grp, ttc1_clk_3_grp, ttc1_wav_3_grp,
+                     ttc1_clk_4_grp, ttc1_wav_4_grp, ttc1_clk_5_grp,
+                     ttc1_wav_5_grp, ttc1_clk_6_grp, ttc1_wav_6_grp,
+                     ttc1_clk_7_grp, ttc1_wav_7_grp, ttc1_clk_8_grp,
+                     ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_wav_0_grp,
+                     ttc2_clk_1_grp, ttc2_wav_1_grp, ttc2_clk_2_grp,
+                     ttc2_wav_2_grp, ttc2_clk_3_grp, ttc2_wav_3_grp,
+                     ttc2_clk_4_grp, ttc2_wav_4_grp, ttc2_clk_5_grp,
+                     ttc2_wav_5_grp, ttc2_clk_6_grp, ttc2_wav_6_grp,
+                     ttc2_clk_7_grp, ttc2_wav_7_grp, ttc2_clk_8_grp,
+                     ttc2_wav_8_grp, ttc3_clk_0_grp, ttc3_wav_0_grp,
+                     ttc3_clk_1_grp, ttc3_wav_1_grp, ttc3_clk_2_grp,
+                     ttc3_wav_2_grp, ttc3_clk_3_grp, ttc3_wav_3_grp,
+                     ttc3_clk_4_grp, ttc3_wav_4_grp, ttc3_clk_5_grp,
+                     ttc3_wav_5_grp, ttc3_clk_6_grp, ttc3_wav_6_grp,
+                     ttc3_clk_7_grp, ttc3_wav_7_grp, ttc3_clk_8_grp,
+                     ttc3_wav_8_grp, swdt0_clk_0_grp, swdt0_rst_0_grp,
+                     swdt0_clk_1_grp, swdt0_rst_1_grp, swdt0_clk_2_grp,
+                     swdt0_rst_2_grp, swdt0_clk_3_grp, swdt0_rst_3_grp,
+                     swdt0_clk_4_grp, swdt0_rst_4_grp, swdt0_clk_5_grp,
+                     swdt0_rst_5_grp, swdt0_clk_6_grp, swdt0_rst_6_grp,
+                     swdt0_clk_7_grp, swdt0_rst_7_grp, swdt0_clk_8_grp,
+                     swdt0_rst_8_grp, swdt0_clk_9_grp, swdt0_rst_9_grp,
+                     swdt0_clk_10_grp, swdt0_rst_10_grp, swdt0_clk_11_grp,
+                     swdt0_rst_11_grp, swdt0_clk_12_grp, swdt0_rst_12_grp,
+                     swdt1_clk_0_grp, swdt1_rst_0_grp, swdt1_clk_1_grp,
+                     swdt1_rst_1_grp, swdt1_clk_2_grp, swdt1_rst_2_grp,
+                     swdt1_clk_3_grp, swdt1_rst_3_grp, swdt1_clk_4_grp,
+                     swdt1_rst_4_grp, swdt1_clk_5_grp, swdt1_rst_5_grp,
+                     swdt1_clk_6_grp, swdt1_rst_6_grp, swdt1_clk_7_grp,
+                     swdt1_rst_7_grp, swdt1_clk_8_grp, swdt1_rst_8_grp,
+                     swdt1_clk_9_grp, swdt1_rst_9_grp, swdt1_clk_10_grp,
+                     swdt1_rst_10_grp, swdt1_clk_11_grp, swdt1_rst_11_grp,
+                     swdt1_clk_12_grp, swdt1_rst_12_grp, gpio0_0_grp,
+                     gpio0_1_grp, gpio0_2_grp, gpio0_3_grp,
+                     gpio0_4_grp, gpio0_5_grp, gpio0_6_grp,
+                     gpio0_7_grp, gpio0_8_grp, gpio0_9_grp,
+                     gpio0_10_grp, gpio0_11_grp, gpio0_12_grp,
+                     gpio0_13_grp, gpio0_14_grp, gpio0_15_grp,
+                     gpio0_16_grp, gpio0_17_grp, gpio0_18_grp,
+                     gpio0_19_grp, gpio0_20_grp, gpio0_21_grp,
+                     gpio0_22_grp, gpio0_23_grp, gpio0_24_grp,
+                     gpio0_25_grp, gpio0_26_grp, gpio0_27_grp,
+                     gpio0_28_grp, gpio0_29_grp, gpio0_30_grp,
+                     gpio0_31_grp, gpio0_32_grp, gpio0_33_grp,
+                     gpio0_34_grp, gpio0_35_grp, gpio0_36_grp,
+                     gpio0_37_grp, gpio0_38_grp, gpio0_39_grp,
+                     gpio0_40_grp, gpio0_41_grp, gpio0_42_grp,
+                     gpio0_43_grp, gpio0_44_grp, gpio0_45_grp,
+                     gpio0_46_grp, gpio0_47_grp, gpio0_48_grp,
+                     gpio0_49_grp, gpio0_50_grp, gpio0_51_grp,
+                     gpio0_52_grp, gpio0_53_grp, gpio0_54_grp,
+                     gpio0_55_grp, gpio0_56_grp, gpio0_57_grp,
+                     gpio0_58_grp, gpio0_59_grp, gpio0_60_grp,
+                     gpio0_61_grp, gpio0_62_grp, gpio0_63_grp,
+                     gpio0_64_grp, gpio0_65_grp, gpio0_66_grp,
+                     gpio0_67_grp, gpio0_68_grp, gpio0_69_grp,
+                     gpio0_70_grp, gpio0_71_grp, gpio0_72_grp,
+                     gpio0_73_grp, gpio0_74_grp, gpio0_75_grp,
+                     gpio0_76_grp, gpio0_77_grp, usb0_0_grp,
+                     usb1_0_grp, pmu0_0_grp, pmu0_1_grp,
+                     pmu0_2_grp, pmu0_3_grp, pmu0_4_grp,
+                     pmu0_5_grp, pmu0_6_grp, pmu0_7_grp,
+                     pmu0_8_grp, pmu0_9_grp, pmu0_10_grp,
+                     pmu0_11_grp, pcie0_0_grp, pcie0_1_grp,
+                     pcie0_2_grp, pcie0_3_grp, pcie0_4_grp,
+                     pcie0_5_grp, pcie0_6_grp, pcie0_7_grp,
+                     csu0_0_grp, csu0_1_grp, csu0_2_grp,
+                     csu0_3_grp, csu0_4_grp, csu0_5_grp,
+                     csu0_6_grp, csu0_7_grp, csu0_8_grp,
+                     csu0_9_grp, csu0_10_grp, csu0_11_grp,
+                     dpaux0_0_grp, dpaux0_1_grp, dpaux0_2_grp,
+                     dpaux0_3_grp, pjtag0_0_grp, pjtag0_1_grp,
+                     pjtag0_2_grp, pjtag0_3_grp, pjtag0_4_grp,
+                     pjtag0_5_grp, trace0_0_grp, trace0_clk_0_grp,
+                     trace0_1_grp, trace0_clk_1_grp, trace0_2_grp,
+                     trace0_clk_2_grp, testscan0_0_grp]
+            maxItems: 78
+
+          function:
+            description:
+              Specify the alternative function to be configured for the
+              given pin groups.
+            enum: [ethernet0, ethernet1, ethernet2, ethernet3, gemtsu0, usb0, usb1, mdio0,
+                   mdio1, mdio2, mdio3, qspi0, qspi_fbclk, qspi_ss, spi0, spi1, spi0_ss,
+                   spi1_ss, sdio0, sdio0_pc, sdio0_wp, sdio0_cd, sdio1, sdio1_pc, sdio1_wp,
+                   sdio1_cd, nand0, nand0_ce, nand0_rb, nand0_dqs, can0, can1, uart0, uart1,
+                   i2c0, i2c1, ttc0_clk, ttc0_wav, ttc1_clk, ttc1_wav, ttc2_clk, ttc2_wav,
+                   ttc3_clk, ttc3_wav, swdt0_clk, swdt0_rst, swdt1_clk, swdt1_rst, gpio0, pmu0,
+                   pcie0, csu0, dpaux0, pjtag0, trace0, trace0_clk, testscan0]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+      '^conf':
+        type: object
+        description:
+          Pinctrl node's client devices use subnodes for pin configurations,
+          which in turn use the standard properties below.
+        $ref: pincfg-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of pin groups as mentioned above.
+
+          pins:
+            description:
+              List of pin names to select in this subnode.
+            items:
+              pattern: '^MIO([0-9]|[1-6][0-9]|7[0-7])$'
+            maxItems: 78
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          bias-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          bias-high-impedance: true
+
+          low-power-enable: true
+
+          low-power-disable: true
+
+          slew-rate:
+            enum: [0, 1]
+
+          drive-strength:
+            description:
+              Selects the drive strength for MIO pins, in mA.
+            enum: [2, 4, 8, 12]
+
+          power-source:
+            enum: [0, 1]
+
+        oneOf:
+          - required: [ groups ]
+          - required: [ pins ]
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+    zynqmp_firmware: zynqmp-firmware {
+        pinctrl0: pinctrl {
+          compatible = "xlnx,zynqmp-pinctrl";
+
+          pinctrl_uart1_default: uart1-default {
+             mux {
+                 groups = "uart0_4_grp", "uart0_5_grp";
+                 function = "uart0";
+             };
+
+             conf {
+                groups = "uart0_4_grp";
+                slew-rate = <SLEW_RATE_SLOW>;
+                power-source = <IO_STANDARD_LVCMOS18>;
+             };
+
+             conf-rx {
+                pins = "MIO18";
+                bias-pull-up;
+             };
+
+             conf-tx {
+                pins = "MIO19";
+                bias-disable;
+                input-schmitt-disable;
+             };
+          };
+        };
+    };
+
+    uart1 {
+         pinctrl-names = "default";
+         pinctrl-0 = <&pinctrl_uart1_default>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
index d3098c924b25..43a932237a92 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/amlogic,meson-ee-pwrc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/amlogic,meson-ee-pwrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson Everything-Else Power Domains
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |+
   The Everything-Else Power Domains node should be the child of a syscon
@@ -17,57 +17,148 @@ description: |+
   - compatible: Should be the following:
                 "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
   compatible:
     enum:
+      - amlogic,meson8-pwrc
+      - amlogic,meson8b-pwrc
+      - amlogic,meson8m2-pwrc
+      - amlogic,meson-gxbb-pwrc
+      - amlogic,meson-axg-pwrc
       - amlogic,meson-g12a-pwrc
       - amlogic,meson-sm1-pwrc
 
   clocks:
-    minItems: 2
+    minItems: 1
+    maxItems: 2
 
   clock-names:
+    minItems: 1
     items:
       - const: vpu
       - const: vapb
 
   resets:
-    minItems: 11
+    minItems: 5
+    maxItems: 12
 
   reset-names:
-    items:
-      - const: viu
-      - const: venc
-      - const: vcbus
-      - const: bt656
-      - const: rdma
-      - const: venci
-      - const: vencp
-      - const: vdac
-      - const: vdi6
-      - const: vencl
-      - const: vid_lock
+    minItems: 5
+    maxItems: 12
 
   "#power-domain-cells":
     const: 1
 
   amlogic,ao-sysctrl:
     description: phandle to the AO sysctrl node
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson8b-pwrc
+            - amlogic,meson8m2-pwrc
+    then:
+      properties:
+        reset-names:
+          items:
+            - const: dblk
+            - const: pic_dc
+            - const: hdmi_apb
+            - const: hdmi_system
+            - const: venci
+            - const: vencp
+            - const: vdac
+            - const: vencl
+            - const: viu
+            - const: venc
+            - const: rdma
+      required:
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gxbb-pwrc
+    then:
+      properties:
+        reset-names:
+          items:
+            - const: viu
+            - const: venc
+            - const: vcbus
+            - const: bt656
+            - const: dvin
+            - const: rdma
+            - const: venci
+            - const: vencp
+            - const: vdac
+            - const: vdi6
+            - const: vencl
+            - const: vid_lock
+      required:
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-pwrc
+    then:
+      properties:
+        reset-names:
+          items:
+            - const: viu
+            - const: venc
+            - const: vcbus
+            - const: vencl
+            - const: vid_lock
+      required:
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-g12a-pwrc
+            - amlogic,meson-sm1-pwrc
+    then:
+      properties:
+        reset-names:
+          items:
+            - const: viu
+            - const: venc
+            - const: vcbus
+            - const: bt656
+            - const: rdma
+            - const: venci
+            - const: vencp
+            - const: vdac
+            - const: vdi6
+            - const: vencl
+            - const: vid_lock
+      required:
+        - resets
+        - reset-names
 
 required:
   - compatible
   - clocks
   - clock-names
-  - resets
-  - reset-names
   - "#power-domain-cells"
   - amlogic,ao-sysctrl
 
+additionalProperties: false
+
 examples:
   - |
     pwrc: power-controller {
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
new file mode 100644
index 000000000000..eab21bb2050a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+# Copyright (c) 2019 Amlogic, Inc
+# Author: Jianxin Pan <jianxin.pan@amlogic.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/amlogic,meson-sec-pwrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson Secure Power Domains
+
+maintainers:
+  - Jianxin Pan <jianxin.pan@amlogic.com>
+
+description: |+
+  Secure Power Domains used in Meson A1/C1/S4 SoCs, and should be the child node
+  of secure-monitor.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-a1-pwrc
+      - amlogic,meson-s4-pwrc
+
+  "#power-domain-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    secure-monitor {
+        compatible = "amlogic,meson-gxbb-sm";
+
+        pwrc: power-controller {
+            compatible = "amlogic,meson-a1-pwrc";
+            #power-domain-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
new file mode 100644
index 000000000000..94d369eb85de
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/apple,pmgr-pwrstate.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC PMGR Power States
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+allOf:
+  - $ref: power-domain.yaml#
+
+description: |
+  Apple SoCs include PMGR blocks responsible for power management,
+  which can control various clocks, resets, power states, and
+  performance features. This binding describes the device power
+  state registers, which control power states and resets.
+
+  Each instance of a power controller within the PMGR syscon node
+  represents a generic power domain provider, as documented in
+  Documentation/devicetree/bindings/power/power-domain.yaml.
+  The provider controls a single SoC block. The power hierarchy is
+  represented via power-domains relationships between these nodes.
+
+  See Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
+  for the top-level PMGR node documentation.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-pmgr-pwrstate
+          - apple,t6000-pmgr-pwrstate
+      - const: apple,pmgr-pwrstate
+
+  reg:
+    maxItems: 1
+
+  "#power-domain-cells":
+    const: 0
+
+  "#reset-cells":
+    const: 0
+
+  power-domains:
+    description:
+      Reference to parent power domains. A domain may have multiple parents,
+      and all will be powered up when it is powered.
+    minItems: 1
+    maxItems: 8 # Arbitrary, should be enough
+
+  label:
+    description:
+      Specifies the name of the SoC domain being controlled. This is used to
+      name the power/reset domains.
+
+  apple,always-on:
+    description:
+      Forces this power domain to always be powered up.
+    type: boolean
+
+  apple,min-state:
+    description:
+      Specifies the minimum power state for auto-PM.
+      0 = power gated, 4 = clock gated, 15 = on.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+required:
+  - compatible
+  - reg
+  - "#power-domain-cells"
+  - "#reset-cells"
+  - label
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
deleted file mode 100644
index ab0d5ebbad4e..000000000000
--- a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-QCOM CPR (Core Power Reduction)
-
-CPR (Core Power Reduction) is a technology to reduce core power on a CPU
-or other device. Each OPP of a device corresponds to a "corner" that has
-a range of valid voltages for a particular frequency. While the device is
-running at a particular frequency, CPR monitors dynamic factors such as
-temperature, etc. and suggests adjustments to the voltage to save power
-and meet silicon characteristic requirements.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: should be "qcom,qcs404-cpr", "qcom,cpr" for qcs404
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address and size of the rbcpr register region
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the CPR interrupt
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: phandle to the reference clock
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "ref"
-
-- vdd-apc-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: phandle to the vdd-apc-supply regulator
-
-- #power-domain-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: should be 0
-
-- operating-points-v2:
-	Usage: required
-	Value type: <phandle>
-	Definition: A phandle to the OPP table containing the
-		    performance states supported by the CPR
-		    power domain
-
-- acc-syscon:
-	Usage: optional
-	Value type: <phandle>
-	Definition: phandle to syscon for writing ACC settings
-
-- nvmem-cells:
-	Usage: required
-	Value type: <phandle>
-	Definition: phandle to nvmem cells containing the data
-		    that makes up a fuse corner, for each fuse corner.
-		    As well as the CPR fuse revision.
-
-- nvmem-cell-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: should be "cpr_quotient_offset1", "cpr_quotient_offset2",
-		    "cpr_quotient_offset3", "cpr_init_voltage1",
-		    "cpr_init_voltage2", "cpr_init_voltage3", "cpr_quotient1",
-		    "cpr_quotient2", "cpr_quotient3", "cpr_ring_osc1",
-		    "cpr_ring_osc2", "cpr_ring_osc3", "cpr_fuse_revision"
-		    for qcs404.
-
-Example:
-
-	cpr_opp_table: cpr-opp-table {
-		compatible = "operating-points-v2-qcom-level";
-
-		cpr_opp1: opp1 {
-			opp-level = <1>;
-			qcom,opp-fuse-level = <1>;
-		};
-		cpr_opp2: opp2 {
-			opp-level = <2>;
-			qcom,opp-fuse-level = <2>;
-		};
-		cpr_opp3: opp3 {
-			opp-level = <3>;
-			qcom,opp-fuse-level = <3>;
-		};
-	};
-
-	power-controller@b018000 {
-		compatible = "qcom,qcs404-cpr", "qcom,cpr";
-		reg = <0x0b018000 0x1000>;
-		interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&xo_board>;
-		clock-names = "ref";
-		vdd-apc-supply = <&pms405_s3>;
-		#power-domain-cells = <0>;
-		operating-points-v2 = <&cpr_opp_table>;
-		acc-syscon = <&tcsr>;
-
-		nvmem-cells = <&cpr_efuse_quot_offset1>,
-			<&cpr_efuse_quot_offset2>,
-			<&cpr_efuse_quot_offset3>,
-			<&cpr_efuse_init_voltage1>,
-			<&cpr_efuse_init_voltage2>,
-			<&cpr_efuse_init_voltage3>,
-			<&cpr_efuse_quot1>,
-			<&cpr_efuse_quot2>,
-			<&cpr_efuse_quot3>,
-			<&cpr_efuse_ring1>,
-			<&cpr_efuse_ring2>,
-			<&cpr_efuse_ring3>,
-			<&cpr_efuse_revision>;
-		nvmem-cell-names = "cpr_quotient_offset1",
-			"cpr_quotient_offset2",
-			"cpr_quotient_offset3",
-			"cpr_init_voltage1",
-			"cpr_init_voltage2",
-			"cpr_init_voltage3",
-			"cpr_quotient1",
-			"cpr_quotient2",
-			"cpr_quotient3",
-			"cpr_ring_osc1",
-			"cpr_ring_osc2",
-			"cpr_ring_osc3",
-			"cpr_fuse_revision";
-	};
diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
new file mode 100644
index 000000000000..301db7daf870
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Core Power Reduction (CPR) bindings
+
+maintainers:
+  - Niklas Cassel <nks@flawful.org>
+
+description: |
+  CPR (Core Power Reduction) is a technology to reduce core power on a CPU
+  or other device. Each OPP of a device corresponds to a "corner" that has
+  a range of valid voltages for a particular frequency. While the device is
+  running at a particular frequency, CPR monitors dynamic factors such as
+  temperature, etc. and suggests adjustments to the voltage to save power
+  and meet silicon characteristic requirements.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,qcs404-cpr
+      - const: qcom,cpr
+
+  reg:
+    description: Base address and size of the RBCPR register region.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Reference clock.
+
+  clock-names:
+    items:
+      - const: ref
+
+  vdd-apc-supply:
+    description: APC regulator supply.
+
+  '#power-domain-cells':
+    const: 0
+
+  operating-points-v2:
+    description: |
+      A phandle to the OPP table containing the performance states
+      supported by the CPR power domain.
+
+  acc-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the syscon used for writing ACC settings.
+
+  nvmem-cells:
+    items:
+      - description: Corner 1 quotient offset
+      - description: Corner 2 quotient offset
+      - description: Corner 3 quotient offset
+      - description: Corner 1 initial voltage
+      - description: Corner 2 initial voltage
+      - description: Corner 3 initial voltage
+      - description: Corner 1 quotient
+      - description: Corner 2 quotient
+      - description: Corner 3 quotient
+      - description: Corner 1 ring oscillator
+      - description: Corner 2 ring oscillator
+      - description: Corner 3 ring oscillator
+      - description: Fuse revision
+
+  nvmem-cell-names:
+    items:
+      - const: cpr_quotient_offset1
+      - const: cpr_quotient_offset2
+      - const: cpr_quotient_offset3
+      - const: cpr_init_voltage1
+      - const: cpr_init_voltage2
+      - const: cpr_init_voltage3
+      - const: cpr_quotient1
+      - const: cpr_quotient2
+      - const: cpr_quotient3
+      - const: cpr_ring_osc1
+      - const: cpr_ring_osc2
+      - const: cpr_ring_osc3
+      - const: cpr_fuse_revision
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vdd-apc-supply
+  - '#power-domain-cells'
+  - operating-points-v2
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cpr_opp_table: opp-table-cpr {
+        compatible = "operating-points-v2-qcom-level";
+
+        cpr_opp1: opp1 {
+            opp-level = <1>;
+            qcom,opp-fuse-level = <1>;
+        };
+        cpr_opp2: opp2 {
+            opp-level = <2>;
+            qcom,opp-fuse-level = <2>;
+        };
+        cpr_opp3: opp3 {
+            opp-level = <3>;
+            qcom,opp-fuse-level = <3>;
+        };
+    };
+
+    power-controller@b018000 {
+        compatible = "qcom,qcs404-cpr", "qcom,cpr";
+        reg = <0x0b018000 0x1000>;
+        interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&xo_board>;
+        clock-names = "ref";
+        vdd-apc-supply = <&pms405_s3>;
+        #power-domain-cells = <0>;
+        operating-points-v2 = <&cpr_opp_table>;
+        acc-syscon = <&tcsr>;
+
+        nvmem-cells = <&cpr_efuse_quot_offset1>,
+            <&cpr_efuse_quot_offset2>,
+            <&cpr_efuse_quot_offset3>,
+            <&cpr_efuse_init_voltage1>,
+            <&cpr_efuse_init_voltage2>,
+            <&cpr_efuse_init_voltage3>,
+            <&cpr_efuse_quot1>,
+            <&cpr_efuse_quot2>,
+            <&cpr_efuse_quot3>,
+            <&cpr_efuse_ring1>,
+            <&cpr_efuse_ring2>,
+            <&cpr_efuse_ring3>,
+            <&cpr_efuse_revision>;
+        nvmem-cell-names = "cpr_quotient_offset1",
+            "cpr_quotient_offset2",
+            "cpr_quotient_offset3",
+            "cpr_init_voltage1",
+            "cpr_init_voltage2",
+            "cpr_init_voltage3",
+            "cpr_quotient1",
+            "cpr_quotient2",
+            "cpr_quotient3",
+            "cpr_ring_osc1",
+            "cpr_ring_osc2",
+            "cpr_ring_osc3",
+            "cpr_fuse_revision";
+    };
diff --git a/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml
new file mode 100644
index 000000000000..f8e7ddbd2705
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/brcm,bcm-pmb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom PMB (Power Management Bus) controller
+
+description: This document describes Broadcom's PMB controller. It supports
+  powering various types of connected devices (e.g. PCIe, USB, SATA).
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4908-pmb
+      - brcm,bcm63138-pmb
+
+  reg:
+    description: register space of one or more buses
+    maxItems: 1
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Flag to use for block working in big endian mode.
+
+  "#power-domain-cells":
+    description: cell specifies device ID (see bcm-pmb.h)
+    const: 1
+
+required:
+  - reg
+  - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/bcm-pmb.h>
+
+    pmb: power-controller@802800e0 {
+        compatible = "brcm,bcm4908-pmb";
+        reg = <0x802800e0 0x40>;
+        #power-domain-cells = <1>;
+    };
+
+    foo {
+        power-domains = <&pmb BCM_PMB_PCIE0>;
+    };
diff --git a/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml b/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml
new file mode 100644
index 000000000000..d867bd6976d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/brcm,bcm63xx-power.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM63xx power domain driver
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+description: |
+  BCM6318, BCM6328, BCM6362 and BCM63268 SoCs have a power domain controller
+  to enable/disable certain components in order to save power.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm6318-power-controller
+          - brcm,bcm6328-power-controller
+          - brcm,bcm6362-power-controller
+          - brcm,bcm63268-power-controller
+
+  reg:
+    maxItems: 1
+
+  "#power-domain-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    periph_pwr: power-controller@10001848 {
+        compatible = "brcm,bcm6328-power-controller";
+        reg = <0x10001848 0x4>;
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.yaml b/Documentation/devicetree/bindings/power/domain-idle-state.yaml
index dfba1af9abe5..4ee920a1de69 100644
--- a/Documentation/devicetree/bindings/power/domain-idle-state.yaml
+++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml
@@ -20,6 +20,7 @@ properties:
 patternProperties:
   "^(cpu|cluster|domain)-":
     type: object
+    additionalProperties: false
     description:
       Each state node represents a domain idle state description.
 
@@ -44,12 +45,23 @@ patternProperties:
           state will yield power benefits, after overcoming the overhead while
           entering the idle state.
 
+      arm,psci-suspend-param:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          power_state parameter to pass to the ARM PSCI suspend call.
+
+          Device tree nodes that require usage of PSCI CPU_SUSPEND function
+          (i.e. idle states node with entry-method property is set to "psci")
+          must specify this property.
+
     required:
       - compatible
       - entry-latency-us
       - exit-latency-us
       - min-residency-us
 
+additionalProperties: false
+
 examples:
   - |
 
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
deleted file mode 100644
index f0f5553a9e74..000000000000
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-Freescale i.MX General Power Controller
-=======================================
-
-The i.MX6 General Power Control (GPC) block contains DVFS load tracking
-counters and Power Gating Control (PGC).
-
-Required properties:
-- compatible: Should be one of the following:
-  - fsl,imx6q-gpc
-  - fsl,imx6qp-gpc
-  - fsl,imx6sl-gpc
-  - fsl,imx6sx-gpc
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain one interrupt specifier for the GPC interrupt
-- clocks: Must contain an entry for each entry in clock-names.
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - ipg
-
-The power domains are generic power domain providers as documented in
-Documentation/devicetree/bindings/power/power-domain.yaml. They are described as
-subnodes of the power gating controller 'pgc' node of the GPC and should
-contain the following:
-
-Required properties:
-- reg: Must contain the DOMAIN_INDEX of this power domain
-  The following DOMAIN_INDEX values are valid for i.MX6Q:
-  ARM_DOMAIN     0
-  PU_DOMAIN      1
-  The following additional DOMAIN_INDEX value is valid for i.MX6SL:
-  DISPLAY_DOMAIN 2
-  The following additional DOMAIN_INDEX value is valid for i.MX6SX:
-  PCI_DOMAIN     3
-
-- #power-domain-cells: Should be 0
-
-Optional properties:
-- clocks: a number of phandles to clocks that need to be enabled during domain
-  power-up sequencing to ensure reset propagation into devices located inside
-  this power domain
-- power-supply: a phandle to the regulator powering this domain
-
-Example:
-
-	gpc: gpc@20dc000 {
-		compatible = "fsl,imx6q-gpc";
-		reg = <0x020dc000 0x4000>;
-		interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX6QDL_CLK_IPG>;
-		clock-names = "ipg";
-
-		pgc {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			power-domain@0 {
-				reg = <0>;
-				#power-domain-cells = <0>;
-			};
-
-			pd_pu: power-domain@1 {
-				reg = <1>;
-				#power-domain-cells = <0>;
-				power-supply = <&reg_pu>;
-				clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
-				         <&clks IMX6QDL_CLK_GPU3D_SHADER>,
-				         <&clks IMX6QDL_CLK_GPU2D_CORE>,
-				         <&clks IMX6QDL_CLK_GPU2D_AXI>,
-				         <&clks IMX6QDL_CLK_OPENVG_AXI>,
-				         <&clks IMX6QDL_CLK_VPU_AXI>;
-			};
-		};
-	};
-
-
-Specifying power domain for IP modules
-======================================
-
-IP cores belonging to a power domain should contain a 'power-domains' property
-that is a phandle pointing to the power domain the device belongs to.
-
-Example of a device that is part of the PU power domain:
-
-	vpu: vpu@2040000 {
-		reg = <0x02040000 0x3c000>;
-		/* ... */
-		power-domains = <&pd_pu>;
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
new file mode 100644
index 000000000000..777e1d852ddd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,imx-gpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Power Controller
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The i.MX6 General Power Control (GPC) block contains DVFS load tracking
+  counters and Power Gating Control (PGC).
+
+  The power domains are generic power domain providers as documented in
+  Documentation/devicetree/bindings/power/power-domain.yaml. They are
+  described as subnodes of the power gating controller 'pgc' node of the GPC.
+
+  IP cores belonging to a power domain should contain a 'power-domains'
+  property that is a phandle pointing to the power domain the device belongs
+  to.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6q-gpc
+      - fsl,imx6qp-gpc
+      - fsl,imx6sl-gpc
+      - fsl,imx6sx-gpc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+  pgc:
+    type: object
+    additionalProperties: false
+    description: list of power domains provided by this controller.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "power-domain@[0-9]$":
+        type: object
+        additionalProperties: false
+
+        properties:
+
+          '#power-domain-cells':
+            const: 0
+
+          reg:
+            description: |
+              The following DOMAIN_INDEX values are valid for i.MX6Q:
+                ARM_DOMAIN     0
+                PU_DOMAIN      1
+              The following additional DOMAIN_INDEX value is valid for i.MX6SL:
+                DISPLAY_DOMAIN 2
+              The following additional DOMAIN_INDEX value is valid for i.MX6SX:
+                PCI_DOMAIN     3
+            maxItems: 1
+
+          clocks:
+            description: |
+              A number of phandles to clocks that need to be enabled during domain
+              power-up sequencing to ensure reset propagation into devices located
+              inside this power domain.
+            minItems: 1
+            maxItems: 7
+
+          power-supply: true
+
+        required:
+          - '#power-domain-cells'
+          - reg
+
+    required:
+      - '#address-cells'
+      - '#size-cells'
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pgc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpc@20dc000 {
+        compatible = "fsl,imx6q-gpc";
+        reg = <0x020dc000 0x4000>;
+        interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_IPG>;
+        clock-names = "ipg";
+
+        pgc {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            power-domain@0 {
+                reg = <0>;
+                #power-domain-cells = <0>;
+            };
+
+            pd_pu: power-domain@1 {
+                reg = <1>;
+                #power-domain-cells = <0>;
+                power-supply = <&reg_pu>;
+                clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+                         <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+                         <&clks IMX6QDL_CLK_GPU2D_CORE>,
+                         <&clks IMX6QDL_CLK_GPU2D_AXI>,
+                         <&clks IMX6QDL_CLK_OPENVG_AXI>,
+                         <&clks IMX6QDL_CLK_VPU_AXI>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
deleted file mode 100644
index 61649202f6f5..000000000000
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-Freescale i.MX General Power Controller v2
-==========================================
-
-The i.MX7S/D General Power Control (GPC) block contains Power Gating
-Control (PGC) for various power domains.
-
-Required properties:
-
-- compatible: Should be one of:
-	- "fsl,imx7d-gpc"
-	- "fsl,imx8mq-gpc"
-
-- reg: should be register base and length as documented in the
-  datasheet
-
-- interrupts: Should contain GPC interrupt request 1
-
-Power domains contained within GPC node are generic power domain
-providers, documented in
-Documentation/devicetree/bindings/power/power-domain.yaml, which are
-described as subnodes of the power gating controller 'pgc' node,
-which, in turn, is expected to contain the following:
-
-Required properties:
-
-- reg: Power domain index. Valid values are defined in
-  include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
-  include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
-
-- #power-domain-cells: Should be 0
-
-Optional properties:
-
-- power-supply: Power supply used to power the domain
-- clocks: a number of phandles to clocks that need to be enabled during
-  domain power-up sequencing to ensure reset propagation into devices
-  located inside this power domain
-
-Example:
-
-	gpc: gpc@303a0000 {
-		compatible = "fsl,imx7d-gpc";
-		reg = <0x303a0000 0x1000>;
-		interrupt-controller;
-		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&intc>;
-
-		pgc {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pgc_pcie_phy: power-domain@1 {
-				#power-domain-cells = <0>;
-
-				reg = <1>;
-				power-supply = <&reg_1p0d>;
-			};
-		};
-	};
-
-
-Specifying power domain for IP modules
-======================================
-
-IP cores belonging to a power domain should contain a 'power-domains'
-property that is a phandle for PGC node representing the domain.
-
-Example of a device that is part of the PCIE_PHY power domain:
-
-	pcie: pcie@33800000 {
-	      reg = <0x33800000 0x4000>,
-	            <0x4ff00000 0x80000>;
-		/* ... */
-		power-domains = <&pgc_pcie_phy>;
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
new file mode 100644
index 000000000000..dfdb8dfb6b65
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,imx-gpcv2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Power Controller v2
+
+maintainers:
+  - Andrey Smirnov <andrew.smirnov@gmail.com>
+
+description: |
+  The i.MX7S/D General Power Control (GPC) block contains Power Gating
+  Control (PGC) for various power domains.
+
+  Power domains contained within GPC node are generic power domain
+  providers, documented in
+  Documentation/devicetree/bindings/power/power-domain.yaml, which are
+  described as subnodes of the power gating controller 'pgc' node.
+
+  IP cores belonging to a power domain should contain a 'power-domains'
+  property that is a phandle for PGC node representing the domain.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx7d-gpc
+      - fsl,imx8mn-gpc
+      - fsl,imx8mq-gpc
+      - fsl,imx8mm-gpc
+      - fsl,imx8mp-gpc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  '#interrupt-cells':
+    const: 3
+
+  pgc:
+    type: object
+    additionalProperties: false
+    description: list of power domains provided by this controller.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "power-domain@[0-9a-f]+$":
+        type: object
+        additionalProperties: false
+
+        properties:
+
+          '#power-domain-cells':
+            const: 0
+
+          reg:
+            description: |
+              Power domain index. Valid values are defined in
+              include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
+              include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
+              include/dt-bindings/power/imx8mm-power.h for fsl,imx8mm-gpc
+              include/dt-bindings/power/imx8mp-power.h for fsl,imx8mp-gpc
+            maxItems: 1
+
+          clocks:
+            description: |
+              A number of phandles to clocks that need to be enabled during domain
+              power-up sequencing to ensure reset propagation into devices located
+              inside this power domain.
+            minItems: 1
+            maxItems: 5
+
+          power-supply: true
+
+          power-domains:
+            maxItems: 1
+
+          resets:
+            description: |
+              A number of phandles to resets that need to be asserted during
+              power-up sequencing of the domain. The resets belong to devices
+              located inside the power domain, which need to be held in reset
+              across the power-up sequence. So no means to specify what each
+              reset is in a generic power-domain binding.
+            minItems: 1
+            maxItems: 4
+
+        required:
+          - '#power-domain-cells'
+          - reg
+
+    required:
+      - '#address-cells'
+      - '#size-cells'
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - pgc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpc@303a0000 {
+        compatible = "fsl,imx7d-gpc";
+        reg = <0x303a0000 0x1000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+
+        pgc {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pgc_mipi_phy: power-domain@0 {
+                #power-domain-cells = <0>;
+                reg = <0>;
+                power-supply = <&reg_1p0d>;
+            };
+
+            pgc_pcie_phy: power-domain@1 {
+                #power-domain-cells = <0>;
+                reg = <1>;
+                power-supply = <&reg_1p0d>;
+            };
+
+            pgc_hsic_phy: power-domain@2 {
+                #power-domain-cells = <0>;
+                reg = <2>;
+                power-supply = <&reg_1p2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
new file mode 100644
index 000000000000..1f72b18ca0fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,scu-pd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Power domain bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  Power domain bindings based on SCU Message Protocol
+
+allOf:
+  - $ref: power-domain.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8qm-scu-pd
+          - fsl,imx8qxp-scu-pd
+      - const: fsl,scu-pd
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    power-controller {
+        compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
new file mode 100644
index 000000000000..605ec7ab5f63
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Power Domains Controller
+
+maintainers:
+  - MandyJH Liu <mandyjh.liu@mediatek.com>
+  - Matthias Brugger <mbrugger@suse.com>
+
+description: |
+  Mediatek processors include support for multiple power domains which can be
+  powered up/down by software based on different application scenes to save power.
+
+  IP cores belonging to a power domain should contain a 'power-domains'
+  property that is a phandle for SCPSYS node representing the domain.
+
+properties:
+  $nodename:
+    pattern: '^power-controller(@[0-9a-f]+)?$'
+
+  compatible:
+    enum:
+      - mediatek,mt6795-power-controller
+      - mediatek,mt8167-power-controller
+      - mediatek,mt8173-power-controller
+      - mediatek,mt8183-power-controller
+      - mediatek,mt8186-power-controller
+      - mediatek,mt8192-power-controller
+      - mediatek,mt8195-power-controller
+
+  '#power-domain-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^power-domain@[0-9a-f]+$":
+    $ref: "#/$defs/power-domain-node"
+    patternProperties:
+      "^power-domain@[0-9a-f]+$":
+        $ref: "#/$defs/power-domain-node"
+        patternProperties:
+          "^power-domain@[0-9a-f]+$":
+            $ref: "#/$defs/power-domain-node"
+            patternProperties:
+              "^power-domain@[0-9a-f]+$":
+                $ref: "#/$defs/power-domain-node"
+                unevaluatedProperties: false
+            unevaluatedProperties: false
+        unevaluatedProperties: false
+    unevaluatedProperties: false
+
+$defs:
+  power-domain-node:
+    type: object
+    description: |
+      Represents the power domains within the power controller node as documented
+      in Documentation/devicetree/bindings/power/power-domain.yaml.
+
+    properties:
+
+      '#power-domain-cells':
+        description:
+          Must be 0 for nodes representing a single PM domain and 1 for nodes
+          providing multiple PM domains.
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      reg:
+        description: |
+          Power domain index. Valid values are defined in:
+              "include/dt-bindings/power/mt6795-power.h" - for MT8167 type power domain.
+              "include/dt-bindings/power/mt8167-power.h" - for MT8167 type power domain.
+              "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
+              "include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
+              "include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain.
+              "include/dt-bindings/power/mt8195-power.h" - for MT8195 type power domain.
+        maxItems: 1
+
+      clocks:
+        description: |
+          A number of phandles to clocks that need to be enabled during domain
+          power-up sequencing.
+
+      clock-names:
+        description: |
+          List of names of clocks, in order to match the power-up sequencing
+          for each power domain we need to group the clocks by name. BASIC
+          clocks need to be enabled before enabling the corresponding power
+          domain, and should not have a '-' in their name (i.e mm, mfg, venc).
+          SUSBYS clocks need to be enabled before releasing the bus protection,
+          and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
+
+          In order to follow properly the power-up sequencing, the clocks must
+          be specified by order, adding first the BASIC clocks followed by the
+          SUSBSYS clocks.
+
+      domain-supply:
+        description: domain regulator supply.
+
+      mediatek,infracfg:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to the device containing the INFRACFG register range.
+
+      mediatek,smi:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to the device containing the SMI register range.
+
+    required:
+      - reg
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        scpsys: syscon@10006000 {
+            compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd";
+            reg = <0 0x10006000 0 0x1000>;
+
+            spm: power-controller {
+                compatible = "mediatek,mt8173-power-controller";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #power-domain-cells = <1>;
+
+                /* power domains of the SoC */
+                power-domain@MT8173_POWER_DOMAIN_VDEC {
+                    reg = <MT8173_POWER_DOMAIN_VDEC>;
+                    clocks = <&topckgen CLK_TOP_MM_SEL>;
+                    clock-names = "mm";
+                    #power-domain-cells = <0>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_VENC {
+                    reg = <MT8173_POWER_DOMAIN_VENC>;
+                    clocks = <&topckgen CLK_TOP_MM_SEL>,
+                             <&topckgen CLK_TOP_VENC_SEL>;
+                    clock-names = "mm", "venc";
+                    #power-domain-cells = <0>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_ISP {
+                    reg = <MT8173_POWER_DOMAIN_ISP>;
+                    clocks = <&topckgen CLK_TOP_MM_SEL>;
+                    clock-names = "mm";
+                    #power-domain-cells = <0>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_MM {
+                    reg = <MT8173_POWER_DOMAIN_MM>;
+                    clocks = <&topckgen CLK_TOP_MM_SEL>;
+                    clock-names = "mm";
+                    #power-domain-cells = <0>;
+                    mediatek,infracfg = <&infracfg>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_VENC_LT {
+                    reg = <MT8173_POWER_DOMAIN_VENC_LT>;
+                    clocks = <&topckgen CLK_TOP_MM_SEL>,
+                             <&topckgen CLK_TOP_VENC_LT_SEL>;
+                    clock-names = "mm", "venclt";
+                    #power-domain-cells = <0>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_AUDIO {
+                    reg = <MT8173_POWER_DOMAIN_AUDIO>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_USB {
+                    reg = <MT8173_POWER_DOMAIN_USB>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
+                    reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
+                    clocks = <&clk26m>;
+                    clock-names = "mfg";
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    #power-domain-cells = <1>;
+
+                    power-domain@MT8173_POWER_DOMAIN_MFG_2D {
+                        reg = <MT8173_POWER_DOMAIN_MFG_2D>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        #power-domain-cells = <1>;
+
+                        power-domain@MT8173_POWER_DOMAIN_MFG {
+                            reg = <MT8173_POWER_DOMAIN_MFG>;
+                            #power-domain-cells = <0>;
+                            mediatek,infracfg = <&infracfg>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
deleted file mode 100644
index c6b82511ae8a..000000000000
--- a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Binding for MIPS Cluster Power Controller (CPC).
-
-This binding allows a system to specify where the CPC registers are
-located.
-
-Required properties:
-compatible : Should be "mti,mips-cpc".
-regs: Should describe the address & size of the CPC register region.
diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml
new file mode 100644
index 000000000000..be447ccfdcb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/mti,mips-cpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Cluster Power Controller
+
+description: |
+  Defines a location of the MIPS Cluster Power Controller registers.
+
+maintainers:
+  - Paul Burton <paulburton@kernel.org>
+
+properties:
+  compatible:
+    const: mti,mips-cpc
+
+  reg:
+    description: |
+      Base address and size of an unoccupied memory region, which will be
+      used to map the MIPS CPC registers block.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cpc@1bde0000 {
+      compatible = "mti,mips-cpc";
+      reg = <0x1bde0000 0x8000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/pd-samsung.yaml b/Documentation/devicetree/bindings/power/pd-samsung.yaml
index 09bdd96c1ec1..9c2c51133457 100644
--- a/Documentation/devicetree/bindings/power/pd-samsung.yaml
+++ b/Documentation/devicetree/bindings/power/pd-samsung.yaml
@@ -49,6 +49,8 @@ required:
   - "#power-domain-cells"
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     lcd0_pd: power-domain@10023c80 {
diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
index 6047aacd7766..889091b9814f 100644
--- a/Documentation/devicetree/bindings/power/power-domain.yaml
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -29,6 +29,8 @@ properties:
 
   domain-idle-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       Phandles of idle states that defines the available states for the
       power-domain provider. The idle state definitions are compatible with the
@@ -42,11 +44,13 @@ properties:
 
   operating-points-v2:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Phandles to the OPP tables of power domains provided by a power domain
       provider. If the provider provides a single power domain only or all
       the power domains provided by the provider have identical OPP tables,
-      then this shall contain a single phandle. Refer to ../opp/opp.txt
+      then this shall contain a single phandle. Refer to ../opp/opp-v2-base.yaml
       for more information.
 
   "#power-domain-cells":
@@ -58,17 +62,19 @@ properties:
 
   power-domains:
     description:
-       A phandle and PM domain specifier as defined by bindings of the power
-       controller specified by phandle. Some power domains might be powered
-       from another power domain (or have other hardware specific
-       dependencies). For representing such dependency a standard PM domain
-       consumer binding is used. When provided, all domains created
-       by the given provider should be subdomains of the domain specified
-       by this binding.
+      A phandle and PM domain specifier as defined by bindings of the power
+      controller specified by phandle. Some power domains might be powered
+      from another power domain (or have other hardware specific
+      dependencies). For representing such dependency a standard PM domain
+      consumer binding is used. When provided, all domains created
+      by the given provider should be subdomains of the domain specified
+      by this binding.
 
 required:
   - "#power-domain-cells"
 
+additionalProperties: true
+
 examples:
   - |
     power: power-controller@12340000 {
@@ -114,18 +120,18 @@ examples:
         domain-idle-states = <&DOMAIN_PWR_DN>;
     };
 
-    DOMAIN_RET: state@0 {
-        compatible = "domain-idle-state";
-        reg = <0x0 0x0>;
-        entry-latency-us = <1000>;
-        exit-latency-us = <2000>;
-        min-residency-us = <10000>;
-    };
-
-    DOMAIN_PWR_DN: state@1 {
-        compatible = "domain-idle-state";
-        reg = <0x1 0x0>;
-        entry-latency-us = <5000>;
-        exit-latency-us = <8000>;
-        min-residency-us = <7000>;
+    domain-idle-states {
+        DOMAIN_RET: domain-retention {
+            compatible = "domain-idle-state";
+            entry-latency-us = <1000>;
+            exit-latency-us = <2000>;
+            min-residency-us = <10000>;
+        };
+
+        DOMAIN_PWR_DN: domain-pwr-dn {
+            compatible = "domain-idle-state";
+            entry-latency-us = <5000>;
+            exit-latency-us = <8000>;
+            min-residency-us = <7000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index ba605310abeb..5b4eda919911 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm RPM/RPMh Power domains
 
 maintainers:
-  - Rajendra Nayak <rnayak@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
 
 description:
   For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh
@@ -16,13 +16,35 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,mdm9607-rpmpd
+      - qcom,msm8226-rpmpd
+      - qcom,msm8909-rpmpd
+      - qcom,msm8916-rpmpd
+      - qcom,msm8939-rpmpd
+      - qcom,msm8953-rpmpd
       - qcom,msm8976-rpmpd
+      - qcom,msm8994-rpmpd
       - qcom,msm8996-rpmpd
       - qcom,msm8998-rpmpd
+      - qcom,qcm2290-rpmpd
       - qcom,qcs404-rpmpd
+      - qcom,sa8540p-rpmhpd
+      - qcom,sdm660-rpmpd
       - qcom,sc7180-rpmhpd
+      - qcom,sc7280-rpmhpd
+      - qcom,sc8180x-rpmhpd
+      - qcom,sc8280xp-rpmhpd
       - qcom,sdm845-rpmhpd
+      - qcom,sdx55-rpmhpd
+      - qcom,sdx65-rpmhpd
+      - qcom,sm6115-rpmpd
+      - qcom,sm6125-rpmpd
+      - qcom,sm6350-rpmhpd
+      - qcom,sm6375-rpmpd
       - qcom,sm8150-rpmhpd
+      - qcom,sm8250-rpmhpd
+      - qcom,sm8350-rpmhpd
+      - qcom,sm8450-rpmhpd
 
   '#power-domain-cells':
     const: 1
diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt b/Documentation/devicetree/bindings/power/renesas,apmu.txt
deleted file mode 100644
index 5f24586c8cf3..000000000000
--- a/Documentation/devicetree/bindings/power/renesas,apmu.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-DT bindings for the Renesas Advanced Power Management Unit
-
-Renesas R-Car and RZ/G1 SoCs utilize one or more APMU hardware units
-for CPU core power domain control including SMP boot and CPU Hotplug.
-
-Required properties:
-
-- compatible: Should be "renesas,<soctype>-apmu", "renesas,apmu" as fallback.
-	      Examples with soctypes are:
-		- "renesas,r8a7743-apmu" (RZ/G1M)
-		- "renesas,r8a7744-apmu" (RZ/G1N)
-		- "renesas,r8a7745-apmu" (RZ/G1E)
-		- "renesas,r8a77470-apmu" (RZ/G1C)
-		- "renesas,r8a7790-apmu" (R-Car H2)
-		- "renesas,r8a7791-apmu" (R-Car M2-W)
-		- "renesas,r8a7792-apmu" (R-Car V2H)
-		- "renesas,r8a7793-apmu" (R-Car M2-N)
-		- "renesas,r8a7794-apmu" (R-Car E2)
-
-- reg: Base address and length of the I/O registers used by the APMU.
-
-- cpus: This node contains a list of CPU cores, which should match the order
-  of CPU cores used by the WUPCR and PSTR registers in the Advanced Power
-  Management Unit section of the device's datasheet.
-
-
-Example:
-
-This shows the r8a7791 APMU that can control CPU0 and CPU1.
-
-	apmu@e6152000 {
-		compatible = "renesas,r8a7791-apmu", "renesas,apmu";
-		reg = <0 0xe6152000 0 0x188>;
-		cpus = <&cpu0 &cpu1>;
-	};
diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
new file mode 100644
index 000000000000..f2cc89e7f4e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/renesas,apmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Advanced Power Management Unit
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description:
+  Renesas R-Car Gen2 and RZ/G1 SoCs utilize one or more APMU hardware units for
+  CPU core power domain control including SMP boot and CPU Hotplug.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7742-apmu  # RZ/G1H
+          - renesas,r8a7743-apmu  # RZ/G1M
+          - renesas,r8a7744-apmu  # RZ/G1N
+          - renesas,r8a7745-apmu  # RZ/G1E
+          - renesas,r8a77470-apmu # RZ/G1C
+          - renesas,r8a7790-apmu  # R-Car H2
+          - renesas,r8a7791-apmu  # R-Car M2-W
+          - renesas,r8a7792-apmu  # R-Car V2H
+          - renesas,r8a7793-apmu  # R-Car M2-N
+          - renesas,r8a7794-apmu  # R-Car E2
+      - const: renesas,apmu
+
+  reg:
+    maxItems: 1
+
+  cpus:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      minItems: 1
+      maxItems: 4
+    description: |
+      Array of phandles pointing to CPU cores, which should match the order of
+      CPU cores used by the WUPCR and PSTR registers in the Advanced Power
+      Management Unit section of the device's datasheet.
+
+required:
+  - compatible
+  - reg
+  - cpus
+
+additionalProperties: false
+
+examples:
+  - |
+    apmu@e6152000 {
+            compatible = "renesas,r8a7791-apmu", "renesas,apmu";
+            reg = <0xe6152000 0x188>;
+            cpus = <&cpu0>, <&cpu1>;
+    };
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
deleted file mode 100644
index acb41fade926..000000000000
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-DT bindings for the Renesas R-Car (RZ/G) System Controller
-
-== System Controller Node ==
-
-The R-Car (RZ/G) System Controller provides power management for the CPU cores
-and various coprocessors.
-
-Required properties:
-  - compatible: Must contain exactly one of the following:
-      - "renesas,r8a7743-sysc" (RZ/G1M)
-      - "renesas,r8a7744-sysc" (RZ/G1N)
-      - "renesas,r8a7745-sysc" (RZ/G1E)
-      - "renesas,r8a77470-sysc" (RZ/G1C)
-      - "renesas,r8a774a1-sysc" (RZ/G2M)
-      - "renesas,r8a774b1-sysc" (RZ/G2N)
-      - "renesas,r8a774c0-sysc" (RZ/G2E)
-      - "renesas,r8a7779-sysc" (R-Car H1)
-      - "renesas,r8a7790-sysc" (R-Car H2)
-      - "renesas,r8a7791-sysc" (R-Car M2-W)
-      - "renesas,r8a7792-sysc" (R-Car V2H)
-      - "renesas,r8a7793-sysc" (R-Car M2-N)
-      - "renesas,r8a7794-sysc" (R-Car E2)
-      - "renesas,r8a7795-sysc" (R-Car H3)
-      - "renesas,r8a7796-sysc" (R-Car M3-W)
-      - "renesas,r8a77961-sysc" (R-Car M3-W+)
-      - "renesas,r8a77965-sysc" (R-Car M3-N)
-      - "renesas,r8a77970-sysc" (R-Car V3M)
-      - "renesas,r8a77980-sysc" (R-Car V3H)
-      - "renesas,r8a77990-sysc" (R-Car E3)
-      - "renesas,r8a77995-sysc" (R-Car D3)
-  - reg: Address start and address range for the device.
-  - #power-domain-cells: Must be 1.
-
-
-Example:
-
-	sysc: system-controller@e6180000 {
-		compatible = "renesas,r8a7791-sysc";
-		reg = <0 0xe6180000 0 0x0200>;
-		#power-domain-cells = <1>;
-	};
-
-
-== PM Domain Consumers ==
-
-Devices residing in a power area must refer to that power area, as documented
-by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
-
-Required properties:
-  - power-domains: A phandle and symbolic PM domain specifier, as defined in
-		   <dt-bindings/power/r8a77*-sysc.h>.
-
-
-Example:
-
-	L2_CA15: cache-controller@0 {
-		compatible = "cache";
-		power-domains = <&sysc R8A7791_PD_CA15_SCU>;
-		cache-unified;
-		cache-level = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
new file mode 100644
index 000000000000..0720b54881c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/renesas,rcar-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car and RZ/G System Controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+  The R-Car (RZ/G) System Controller provides power management for the CPU
+  cores and various coprocessors.
+  The power domain IDs for consumers are defined in header files::
+  include/dt-bindings/power/r8*-sysc.h
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a7742-sysc  # RZ/G1H
+      - renesas,r8a7743-sysc  # RZ/G1M
+      - renesas,r8a7744-sysc  # RZ/G1N
+      - renesas,r8a7745-sysc  # RZ/G1E
+      - renesas,r8a77470-sysc # RZ/G1C
+      - renesas,r8a774a1-sysc # RZ/G2M
+      - renesas,r8a774b1-sysc # RZ/G2N
+      - renesas,r8a774c0-sysc # RZ/G2E
+      - renesas,r8a774e1-sysc # RZ/G2H
+      - renesas,r8a7779-sysc  # R-Car H1
+      - renesas,r8a7790-sysc  # R-Car H2
+      - renesas,r8a7791-sysc  # R-Car M2-W
+      - renesas,r8a7792-sysc  # R-Car V2H
+      - renesas,r8a7793-sysc  # R-Car M2-N
+      - renesas,r8a7794-sysc  # R-Car E2
+      - renesas,r8a7795-sysc  # R-Car H3
+      - renesas,r8a77961-sysc # R-Car M3-W+
+      - renesas,r8a77965-sysc # R-Car M3-N
+      - renesas,r8a7796-sysc  # R-Car M3-W
+      - renesas,r8a77970-sysc # R-Car V3M
+      - renesas,r8a77980-sysc # R-Car V3H
+      - renesas,r8a77990-sysc # R-Car E3
+      - renesas,r8a77995-sysc # R-Car D3
+      - renesas,r8a779a0-sysc # R-Car V3U
+      - renesas,r8a779f0-sysc # R-Car S4-8
+      - renesas,r8a779g0-sysc # R-Car V4H
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // System Controller node
+    sysc: system-controller@e6180000 {
+            compatible = "renesas,r8a7791-sysc";
+            reg = <0xe6180000 0x0200>;
+            #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
deleted file mode 100644
index 49aba15dff8b..000000000000
--- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-DT bindings for the Renesas R-Mobile System Controller
-
-== System Controller Node ==
-
-The R-Mobile System Controller provides the following functions:
-  - Boot mode management,
-  - Reset generation,
-  - Power management.
-
-Required properties:
-- compatible: Should be "renesas,sysc-<soctype>", "renesas,sysc-rmobile" as
-	      fallback.
-	      Examples with soctypes are:
-		- "renesas,sysc-r8a73a4" (R-Mobile APE6)
-		- "renesas,sysc-r8a7740" (R-Mobile A1)
-		- "renesas,sysc-sh73a0" (SH-Mobile AG5)
-- reg: Two address start and address range blocks for the device:
-         - The first block refers to the normally accessible registers,
-         - the second block refers to the registers protected by the HPB
-	   semaphore.
-
-Optional nodes:
-- pm-domains: This node contains a hierarchy of PM domain nodes, which should
-  match the Power Area Hierarchy in the Power Domain Specifications section of
-  the device's datasheet.
-
-
-== PM Domain Nodes ==
-
-Each of the PM domain nodes represents a PM domain, as documented by the
-generic PM domain bindings in
-Documentation/devicetree/bindings/power/power-domain.yaml.
-
-The nodes should be named by the real power area names, and thus their names
-should be unique.
-
-Required properties:
-  - #power-domain-cells: Must be 0.
-
-Optional properties:
-- reg: If the PM domain is not always-on, this property must contain the bit
-       index number for the corresponding power area in the various Power
-       Control and Status Registers. The parent's node must contain the
-       following two properties:
-	 - #address-cells: Must be 1,
-	 - #size-cells: Must be 0.
-       If the PM domain is always-on, this property must be omitted.
-
-
-Example:
-
-This shows a subset of the r8a7740 PM domain hierarchy, containing the
-C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP domain,
-which is a subdomain of A4S.
-
-	sysc: system-controller@e6180000 {
-		compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
-		reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
-
-		pm-domains {
-			pd_c5: c5 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#power-domain-cells = <0>;
-
-				pd_a4s: a4s@10 {
-					reg = <10>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#power-domain-cells = <0>;
-
-					pd_a3sp: a3sp@11 {
-						reg = <11>;
-						#power-domain-cells = <0>;
-					};
-				};
-
-				pd_a4su: a4su@20 {
-					reg = <20>;
-					#power-domain-cells = <0>;
-				};
-			};
-		};
-	};
-
-
-== PM Domain Consumers ==
-
-Hardware blocks belonging to a PM domain should contain a "power-domains"
-property that is a phandle pointing to the corresponding PM domain node.
-
-Example:
-
-	tpu: pwm@e6600000 {
-		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
-		reg = <0xe6600000 0x100>;
-		clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
-		power-domains = <&pd_a3sp>;
-		#pwm-cells = <3>;
-	};
diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
new file mode 100644
index 000000000000..559718997de7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/renesas,sysc-rmobile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Mobile System Controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+  The R-Mobile System Controller provides the following functions:
+    - Boot mode management,
+    - Reset generation,
+    - Power management.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,sysc-r8a73a4    # R-Mobile APE6
+          - renesas,sysc-r8a7740    # R-Mobile A1
+          - renesas,sysc-sh73a0     # SH-Mobile AG5
+      - const: renesas,sysc-rmobile # Generic SH/R-Mobile
+
+  reg:
+    items:
+      - description: Normally accessible register block
+      - description: Register block protected by the HPB semaphore
+
+  pm-domains:
+    type: object
+    description: |
+      This node contains a hierarchy of PM domain nodes, which should match the
+      Power Area Hierarchy in the Power Domain Specifications section of the
+      device's datasheet.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    additionalProperties:
+      $ref: "#/$defs/pd-node"
+
+required:
+  - compatible
+  - reg
+  - pm-domains
+
+additionalProperties: false
+
+$defs:
+  pd-node:
+    type: object
+    description:
+      PM domain node representing a PM domain.  This node hould be named by
+      the real power area name, and thus its name should be unique.
+
+    properties:
+      reg:
+        maxItems: 1
+        description:
+          If the PM domain is not always-on, this property must contain the
+          bit index number for the corresponding power area in the various
+          Power Control and Status Registers.
+          If the PM domain is always-on, this property must be omitted.
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      '#power-domain-cells':
+        const: 0
+
+    required:
+      - '#power-domain-cells'
+
+    additionalProperties:
+      $ref: "#/$defs/pd-node"
+
+examples:
+  - |
+    // This shows a subset of the r8a7740 PM domain hierarchy, containing the
+    // C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP
+    // domain, which is a subdomain of A4S.
+    sysc: system-controller@e6180000 {
+            compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
+            reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+            pm-domains {
+                    pd_c5: c5 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+                            #power-domain-cells = <0>;
+
+                            pd_a4s: a4s@10 {
+                                    reg = <10>;
+                                    #address-cells = <1>;
+                                    #size-cells = <0>;
+                                    #power-domain-cells = <0>;
+
+                                    pd_a3sp: a3sp@11 {
+                                            reg = <11>;
+                                            #power-domain-cells = <0>;
+                                    };
+                            };
+
+                            pd_a4su: a4su@20 {
+                                    reg = <20>;
+                                    #power-domain-cells = <0>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt
deleted file mode 100644
index 3e56c1b34a4c..000000000000
--- a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Driver a GPIO line that can be used to turn the power off.
-
-The driver supports both level triggered and edge triggered power off.
-At driver load time, the driver will request the given gpio line and
-install a handler to power off the system. If the optional properties
-'input' is not found, the GPIO line will be driven in the inactive
-state. Otherwise its configured as an input.
-
-When the power-off handler is called, the gpio is configured as an
-output, and drive active, so triggering a level triggered power off
-condition. This will also cause an inactive->active edge condition, so
-triggering positive edge triggered power off. After a delay of 100ms,
-the GPIO is set to inactive, thus causing an active->inactive edge,
-triggering negative edge triggered power off. After another 100ms
-delay the GPIO is driver active again. If the power is still on and
-the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
-
-Required properties:
-- compatible : should be "gpio-poweroff".
-- gpios : The GPIO to set high/low, see "gpios property" in
-  Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be
-  low to power down the board set it to "Active Low", otherwise set
-  gpio to "Active High".
-
-Optional properties:
-- input : Initially configure the GPIO line as an input. Only reconfigure
-  it to an output when the power-off handler is called. If this optional
-  property is not specified, the GPIO is initialized as an output in its
-  inactive state.
-- active-delay-ms: Delay (default 100) to wait after driving gpio active
-- inactive-delay-ms: Delay (default 100) to wait after driving gpio inactive
-- timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is
-              specified, 3000 ms is used.
-
-Examples:
-
-gpio-poweroff {
-	compatible = "gpio-poweroff";
-	gpios = <&gpio 4 0>;
-	timeout-ms = <3000>;
-};
diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml
new file mode 100644
index 000000000000..45d66c775115
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/gpio-poweroff.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled power off
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  System power off support via a GPIO line. When a shutdown is
+  executed the operating system is expected to switch the GPIO
+  from inactive to active. After a delay (active-delay-ms) it
+  is expected to be switched back to inactive. After another
+  delay (inactive-delay-ms) it is configured as active again.
+  Finally the operating system assumes the power off failed if
+  the system is still running after waiting some time (timeout-ms).
+
+properties:
+  compatible:
+    const: gpio-poweroff
+
+  gpios:
+    maxItems: 1
+
+  input:
+    type: boolean
+    description: >
+      Initially configure the GPIO line as an input. Only reconfigure
+      it to an output when the power-off sequence is initiated. If this optional
+      property is not specified, the GPIO is initialized as an output in its inactive state.
+
+  active-delay-ms:
+    default: 100
+    description: Delay to wait after driving gpio active
+
+  inactive-delay-ms:
+    default: 100
+    description: Delay to wait after driving gpio inactive
+
+  timeout-ms:
+    default: 3000
+    description: Time to wait before assuming the power off sequence failed.
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio-poweroff {
+        compatible = "gpio-poweroff";
+        gpios = <&gpio 4 0>;
+        timeout-ms = <3000>;
+    };
diff --git a/Documentation/devicetree/bindings/power/reset/gpio-restart.txt b/Documentation/devicetree/bindings/power/reset/gpio-restart.txt
deleted file mode 100644
index af3701bc15c4..000000000000
--- a/Documentation/devicetree/bindings/power/reset/gpio-restart.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Drive a GPIO line that can be used to restart the system from a restart
-handler.
-
-This binding supports level and edge triggered reset.  At driver load
-time, the driver will request the given gpio line and install a restart
-handler. If the optional properties 'open-source' is not found, the GPIO line
-will be driven in the inactive state.  Otherwise its not driven until
-the restart is initiated.
-
-When the system is restarted, the restart handler will be invoked in
-priority order.  The gpio is configured as an output, and driven active,
-triggering a level triggered reset condition. This will also cause an
-inactive->active edge condition, triggering positive edge triggered
-reset. After a delay specified by active-delay, the GPIO is set to
-inactive, thus causing an active->inactive edge, triggering negative edge
-triggered reset. After a delay specified by inactive-delay, the GPIO
-is driven active again.  After a delay specified by wait-delay, the
-restart handler completes allowing other restart handlers to be attempted.
-
-Required properties:
-- compatible : should be "gpio-restart".
-- gpios : The GPIO to set high/low, see "gpios property" in
-  Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be
-  low to reset the board set it to "Active Low", otherwise set
-  gpio to "Active High".
-
-Optional properties:
-- open-source : Treat the GPIO as being open source and defer driving
-  it to when the restart is initiated.  If this optional property is not
-  specified, the GPIO is initialized as an output in its inactive state.
-- priority : A priority ranging from 0 to 255 (default 128) according to
-  the following guidelines:
-	0:	Restart handler of last resort, with limited restart
-		capabilities
-	128:	Default restart handler; use if no other restart handler is
-		expected to be available, and/or if restart functionality is
-		sufficient to restart the entire system
-	255:	Highest priority restart handler, will preempt all other
-		restart handlers
-- active-delay: Delay (default 100) to wait after driving gpio active [ms]
-- inactive-delay: Delay (default 100) to wait after driving gpio inactive [ms]
-- wait-delay: Delay (default 3000) to wait after completing restart
-  sequence [ms]
-
-Examples:
-
-gpio-restart {
-	compatible = "gpio-restart";
-	gpios = <&gpio 4 0>;
-	priority = <128>;
-	active-delay = <100>;
-	inactive-delay = <100>;
-	wait-delay = <3000>;
-};
diff --git a/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml
new file mode 100644
index 000000000000..a72d5c721516
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/gpio-restart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled reset
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  Drive a GPIO line that can be used to restart the system from a restart handler.
+
+  This binding supports level and edge triggered reset.  At driver load time, the driver will
+  request the given gpio line and install a restart handler. If the optional properties
+  'open-source' is not found, the GPIO line will be driven in the inactive state.  Otherwise its
+  not driven until the restart is initiated.
+
+  When the system is restarted, the restart handler will be invoked in priority order.  The GPIO
+  is configured as an output, and driven active, triggering a level triggered reset condition.
+  This will also cause an inactive->active edge condition, triggering positive edge triggered
+  reset. After a delay specified by active-delay, the GPIO is set to inactive, thus causing an
+  active->inactive edge, triggering negative edge triggered reset. After a delay specified by
+  inactive-delay, the GPIO is driven active again.  After a delay specified by wait-delay, the
+  restart handler completes allowing other restart handlers to be attempted.
+
+properties:
+  compatible:
+    const: gpio-restart
+
+  gpios:
+    description: The GPIO to set high/low, see "gpios property" in
+      Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be low to reset the board
+      set it to "Active Low", otherwise set GPIO to "Active High".
+
+  open-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Treat the GPIO as being open source and defer driving it to when the restart is
+      initiated.  If this optional property is not specified, the GPIO is initialized as an output
+      in its inactive state.
+
+  priority:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      A priority ranging from 0 to 255 (default 129) according to the following guidelines:
+
+        0:   Restart handler of last resort, with limited restart capabilities.
+        128: Default restart handler; use if no other restart handler is expected to be available,
+             and/or if restart functionality is sufficient to restart the entire system.
+        255: Highest priority restart handler, will preempt all other restart handlers.
+    minimum: 0
+    maximum: 255
+    default: 129
+
+  active-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Delay (default 100) to wait after driving gpio active [ms]
+    default: 100
+
+  inactive-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Delay (default 100) to wait after driving gpio inactive [ms]
+    default: 100
+
+  wait-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Delay (default 3000) to wait after completing restart sequence [ms]
+    default: 100
+
+additionalProperties: false
+
+required:
+  - compatible
+  - gpios
+
+examples:
+  - |
+    gpio-restart {
+      compatible = "gpio-restart";
+      gpios = <&gpio 4 0>;
+      priority = <128>;
+      active-delay = <100>;
+      inactive-delay = <100>;
+      wait-delay = <3000>;
+    };
diff --git a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
index cd2d7f58a9d7..38e54b3fd9f3 100644
--- a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
+++ b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
@@ -17,6 +17,9 @@ Optional properties:
 			chip's trigger line. If this property is not set, the
 			trigger function is ignored and the chip is kept alive
 			until an explicit kill signal is received
+- trigger-delay-ms	The number of milliseconds to wait after trigger line
+			assertion before executing shut down procedure.
+			The default is 2500ms.
 
 Example:
 
@@ -24,6 +27,7 @@ ltc2952 {
 	compatible = "lltc,ltc2952";
 
 	trigger-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+	trigger-delay-ms = <2000>;
 	watchdog-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	kill-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 };
diff --git a/Documentation/devicetree/bindings/power/reset/msm-poweroff.txt b/Documentation/devicetree/bindings/power/reset/msm-poweroff.txt
deleted file mode 100644
index ce44ad357565..000000000000
--- a/Documentation/devicetree/bindings/power/reset/msm-poweroff.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-MSM Restart Driver
-
-A power supply hold (ps-hold) bit is set to power the msm chipsets.
-Clearing that bit allows us to restart/poweroff. The difference
-between poweroff and restart is determined by unique power manager IC
-settings.
-
-Required Properties:
--compatible: "qcom,pshold"
--reg: Specifies the physical address of the ps-hold register
-
-Example:
-
-	restart@fc4ab000 {
-		compatible = "qcom,pshold";
-		reg = <0xfc4ab000 0x4>;
-	};
diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
index 1b4213eb3473..c5de7b555feb 100644
--- a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
+++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
@@ -1,10 +1,15 @@
 Microsemi Ocelot reset controller
 
 The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
-SoC MIPS core.
+SoC core.
+
+The reset registers are both present in the MSCC vcoreiii MIPS and
+microchip Sparx5 armv8 SoC's.
 
 Required Properties:
- - compatible: "mscc,ocelot-chip-reset"
+
+ - compatible: "mscc,ocelot-chip-reset", "mscc,luton-chip-reset",
+   "mscc,jaguar2-chip-reset" or "microchip,sparx5-chip-reset"
 
 Example:
 	reset@1070008 {
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
deleted file mode 100644
index 0c0dc3a1e693..000000000000
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Qualcomm PON Device
-
-The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
-and resin along with the Android reboot-mode.
-
-This DT node has pwrkey and resin as sub nodes.
-
-Required Properties:
--compatible: Must be one of:
-	"qcom,pm8916-pon"
-	"qcom,pms405-pon"
-	"qcom,pm8998-pon"
-
--reg: Specifies the physical address of the pon register
-
-Optional subnode:
--pwrkey: Specifies the subnode pwrkey and should follow the
- qcom,pm8941-pwrkey.txt description.
--resin: Specifies the subnode resin and should follow the
- qcom,pm8xxx-pwrkey.txt description.
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-
-	pon@800 {
-		compatible = "qcom,pm8916-pon";
-
-		reg = <0x800>;
-		mode-bootloader = <0x2>;
-		mode-recovery = <0x1>;
-
-		pwrkey {
-			compatible = "qcom,pm8941-pwrkey";
-			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
-			linux,code = <KEY_POWER>;
-		};
-
-		resin {
-			compatible = "qcom,pm8941-resin";
-			interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
new file mode 100644
index 000000000000..d96170eecbd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PON Device
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+  and resin along with the Android reboot-mode.
+
+  This DT node has pwrkey and resin as sub nodes.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8916-pon
+      - qcom,pms405-pon
+      - qcom,pm8998-pon
+      - qcom,pmk8350-pon
+
+  reg:
+    description: |
+      Specifies the SPMI base address for the PON (power-on) peripheral.  For
+      PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS
+      (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS
+      peripherals.  In that case, the PON_PBS address needs to be specified to
+      facilitate software debouncing on some PMIC.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+
+  pwrkey:
+    type: object
+    $ref: /schemas/input/qcom,pm8941-pwrkey.yaml#
+
+  resin:
+    type: object
+    $ref: /schemas/input/qcom,pm8941-pwrkey.yaml#
+
+  watchdog:
+    type: object
+    $ref: /schemas/watchdog/qcom,pm8916-wdt.yaml
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: reboot-mode.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8916-pon
+              - qcom,pms405-pon
+              - qcom,pm8998-pon
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmk8350-pon
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+        reg-names:
+          minItems: 1
+          items:
+            - const: hlos
+            - const: pbs
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/irq.h>
+   #include <dt-bindings/input/linux-event-codes.h>
+   #include <dt-bindings/spmi/spmi.h>
+   spmi_bus: spmi@c440000 {
+     reg = <0x0c440000 0x1100>;
+     #address-cells = <2>;
+     #size-cells = <0>;
+     pmk8350: pmic@0 {
+       reg = <0x0 SPMI_USID>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       pmk8350_pon: pon_hlos@1300 {
+         reg = <0x1300>;
+         compatible = "qcom,pm8998-pon";
+
+         pwrkey {
+            compatible = "qcom,pm8941-pwrkey";
+            interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >;
+            debounce = <15625>;
+            bias-pull-up;
+            linux,code = <KEY_POWER>;
+         };
+
+         resin {
+            compatible = "qcom,pm8941-resin";
+            interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+            debounce = <15625>;
+            bias-pull-up;
+            linux,code = <KEY_VOLUMEDOWN>;
+         };
+       };
+     };
+   };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml
new file mode 100644
index 000000000000..527962d54a8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pshold.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC restart and power off
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  A power supply hold (ps-hold) bit is set to power the Qualcomm chipsets.
+  Clearing that bit allows us to restart/power off. The difference between
+  power off and restart is determined by unique power manager IC settings.
+
+properties:
+  compatible:
+    const: qcom,pshold
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@fc4ab000 {
+        compatible = "qcom,pshold";
+        reg = <0xfc4ab000 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/reboot-mode.txt
deleted file mode 100644
index de34f27d509e..000000000000
--- a/Documentation/devicetree/bindings/power/reset/reboot-mode.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Generic reboot mode core map driver
-
-This driver get reboot mode arguments and call the write
-interface to store the magic value in special register
-or ram. Then the bootloader can read it and take different
-action according to the argument stored.
-
-All mode properties are vendor specific, it is a indication to tell
-the bootloader what to do when the system reboots, and should be named
-as mode-xxx = <magic> (xxx is mode name, magic should be a none-zero value).
-
-For example modes common on Android platform:
-- mode-normal: Normal reboot mode, system reboot with command "reboot".
-- mode-recovery: Android Recovery mode, it is a mode to format the device or update a new image.
-- mode-bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device.
-- mode-loader: A bootloader mode, it's a mode used to download image on Rockchip platform,
-	       usually used in development.
-
-Example:
-	reboot-mode {
-		mode-normal = <BOOT_NORMAL>;
-		mode-recovery = <BOOT_RECOVERY>;
-		mode-bootloader = <BOOT_FASTBOOT>;
-		mode-loader = <BOOT_BL_DOWNLOAD>;
-	}
diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
new file mode 100644
index 000000000000..ad0a0b95cec1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic reboot mode core map
+
+maintainers:
+  - Andy Yan <andy.yan@rock-chips.com>
+
+description: |
+  This driver get reboot mode arguments and call the write
+  interface to store the magic value in special register
+  or ram. Then the bootloader can read it and take different
+  action according to the argument stored.
+
+  All mode properties are vendor specific, it is a indication to tell
+  the bootloader what to do when the system reboots, and should be named
+  as mode-xxx = <magic> (xxx is mode name, magic should be a non-zero value).
+
+  For example, modes common Android platform are:
+    - normal: Normal reboot mode, system reboot with command "reboot".
+    - recovery: Android Recovery mode, it is a mode to format the device or update a new image.
+    - bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device.
+    - loader: A bootloader mode, it's a mode used to download image on Rockchip platform,
+              usually used in development.
+
+properties:
+  mode-normal:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Default value to set on a reboot if no command was provided.
+
+patternProperties:
+  "^mode-.*$":
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+
+examples:
+  - |
+    reboot-mode {
+      mode-normal = <0>;
+      mode-recovery = <1>;
+      mode-bootloader = <2>;
+      mode-loader = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml
new file mode 100644
index 000000000000..e9417557cd30
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/regulator-poweroff.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Force-disable power regulator to turn the power off.
+
+maintainers:
+  - Michael Klein <michael@fossekall.de>
+
+description: |
+  When the power-off handler is called, a power regulator is disabled by
+  calling regulator_force_disable(). If the power is still on and the
+  CPU still running after a 3000ms delay, a warning is emitted.
+
+properties:
+  compatible:
+    const: regulator-poweroff
+
+  cpu-supply:
+    description:
+      regulator to disable on power-down
+
+required:
+  - compatible
+  - cpu-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    regulator-poweroff {
+        compatible = "regulator-poweroff";
+        cpu-supply = <&reg_vcc1v2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
index 520e07e6f21b..3412fe7e1e80 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
@@ -41,6 +41,8 @@ required:
   - regmap
   - offset
 
+additionalProperties: false
+
 allOf:
   - if:
       not:
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt
deleted file mode 100644
index f7ce1d8af04a..000000000000
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-SYSCON reboot mode driver
-
-This driver gets reboot mode magic value form reboot-mode driver
-and stores it in a SYSCON mapped register. Then the bootloader
-can read it and take different action according to the magic
-value stored.
-
-This DT node should be represented as a sub-node of a "syscon", "simple-mfd"
-node.
-
-Required properties:
-- compatible: should be "syscon-reboot-mode"
-- offset: offset in the register map for the storage register (in bytes)
-
-Optional property:
-- mask: bits mask of the bits in the register to store the reboot mode magic value,
-  default set to 0xffffffff if missing.
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-	pmu: pmu@20004000 {
-		compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
-		reg = <0x20004000 0x100>;
-
-		reboot-mode {
-			compatible = "syscon-reboot-mode";
-			offset = <0x40>;
-			mode-normal = <BOOT_NORMAL>;
-			mode-recovery = <BOOT_RECOVERY>;
-			mode-bootloader = <BOOT_FASTBOOT>;
-			mode-loader = <BOOT_BL_DOWNLOAD>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
new file mode 100644
index 000000000000..9b1ffceefe3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/syscon-reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SYSCON reboot mode driver
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  This driver gets reboot mode magic value from reboot-mode driver
+  and stores it in a SYSCON mapped register. Then the bootloader
+  can read it and take different action according to the magic
+  value stored. The SYSCON mapped register is retrieved from the
+  parental dt-node plus the offset. So the SYSCON reboot-mode node
+  should be represented as a sub-node of a "syscon", "simple-mfd" node.
+
+properties:
+  compatible:
+    const: syscon-reboot-mode
+
+  mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Update only the register bits defined by the mask (32 bit)
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the mode register (in bytes)
+
+patternProperties:
+  "^mode-.+":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vendor-specific mode value written to the mode register
+
+additionalProperties: false
+
+required:
+  - compatible
+  - offset
+
+examples:
+  - |
+    #include <dt-bindings/soc/rockchip,boot-mode.h>
+
+    reboot-mode {
+      compatible = "syscon-reboot-mode";
+      offset = <0x40>;
+      mode-normal = <BOOT_NORMAL>;
+      mode-recovery = <BOOT_RECOVERY>;
+      mode-bootloader = <BOOT_FASTBOOT>;
+      mode-loader = <BOOT_BL_DOWNLOAD>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
index d38006b1f1f4..da2509724812 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -12,9 +12,12 @@ maintainers:
 description: |+
   This is a generic reset driver using syscon to map the reset register.
   The reset is generally performed with a write to the reset register
-  defined by the register map pointed by syscon reference plus the offset
-  with the value and mask defined in the reboot node.
-  Default will be little endian mode, 32 bit access only.
+  defined by the SYSCON register map base plus the offset with the value and
+  mask defined in the reboot node. Default will be little endian mode, 32 bit
+  access only. The SYSCON registers map is normally retrieved from the
+  parental dt-node. So the SYSCON reboot node should be represented as a
+  sub-node of a "syscon", "simple-mfd" node. Though the regmap property
+  pointing to the system controller node is also supported.
 
 properties:
   compatible:
@@ -30,7 +33,10 @@ properties:
 
   regmap:
     $ref: /schemas/types.yaml#/definitions/phandle
-    description: Phandle to the register map node.
+    deprecated: true
+    description: |
+      Phandle to the register map node. This property is deprecated in favor of
+      the syscon-reboot node been a child of a system controller node.
 
   value:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -38,9 +44,10 @@ properties:
 
 required:
   - compatible
-  - regmap
   - offset
 
+additionalProperties: false
+
 allOf:
   - if:
       not:
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
deleted file mode 100644
index bb529ecf8a57..000000000000
--- a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
+++ /dev/null
@@ -1,61 +0,0 @@
---------------------------------------------------------------------
-Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
---------------------------------------------------------------------
-The zynqmp-power node describes the power management configurations.
-It will control remote suspend/shutdown interfaces.
-
-Required properties:
- - compatible:		Must contain:	"xlnx,zynqmp-power"
- - interrupts:		Interrupt specifier
-
-Optional properties:
- - mbox-names	: Name given to channels seen in the 'mboxes' property.
-		  "tx" - Mailbox corresponding to transmit path
-		  "rx" - Mailbox corresponding to receive path
- - mboxes	: Standard property to specify a Mailbox. Each value of
-		  the mboxes property should contain a phandle to the
-		  mailbox controller device node and an args specifier
-		  that will be the phandle to the intended sub-mailbox
-		  child node to be used for communication. See
-		  Documentation/devicetree/bindings/mailbox/mailbox.txt
-		  for more details about the generic mailbox controller
-		  and client driver bindings. Also see
-		  Documentation/devicetree/bindings/mailbox/ \
-		  xlnx,zynqmp-ipi-mailbox.txt for typical controller that
-		  is used to communicate with this System controllers.
-
---------
-Examples
---------
-
-Example with interrupt method:
-
-firmware {
-	zynqmp_firmware: zynqmp-firmware {
-		compatible = "xlnx,zynqmp-firmware";
-		method = "smc";
-
-		zynqmp_power: zynqmp-power {
-			compatible = "xlnx,zynqmp-power";
-			interrupts = <0 35 4>;
-		};
-	};
-};
-
-Example with IPI mailbox method:
-
-firmware {
-	zynqmp_firmware: zynqmp-firmware {
-		compatible = "xlnx,zynqmp-firmware";
-		method = "smc";
-
-		zynqmp_power: zynqmp-power {
-			compatible = "xlnx,zynqmp-power";
-			interrupt-parent = <&gic>;
-			interrupts = <0 35 4>;
-			mboxes = <&ipi_mailbox_pmu0 0>,
-				 <&ipi_mailbox_pmu0 1>;
-			mbox-names = "tx", "rx";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
new file mode 100644
index 000000000000..46de35861738
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/xlnx,zynqmp-power.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq MPSoC Power Management Device Tree Bindings
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+description: |
+  The zynqmp-power node describes the power management configurations.
+  It will control remote suspend/shutdown interfaces.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-power
+
+  interrupts:
+    maxItems: 1
+
+  mboxes:
+    description: |
+      Standard property to specify a Mailbox. Each value of
+      the mboxes property should contain a phandle to the
+      mailbox controller device node and an args specifier
+      that will be the phandle to the intended sub-mailbox
+      child node to be used for communication. See
+      Documentation/devicetree/bindings/mailbox/mailbox.txt
+      for more details about the generic mailbox controller
+      and client driver bindings. Also see
+      Documentation/devicetree/bindings/mailbox/ \
+      xlnx,zynqmp-ipi-mailbox.txt for typical controller that
+      is used to communicate with this System controllers.
+    items:
+      - description: tx channel
+      - description: rx channel
+
+  mbox-names:
+    description:
+      Name given to channels seen in the 'mboxes' property.
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |+
+
+    // Example with interrupt method:
+
+    firmware {
+      zynqmp-firmware {
+        zynqmp-power {
+          compatible = "xlnx,zynqmp-power";
+          interrupts = <0 35 4>;
+        };
+      };
+    };
+
+  - |+
+
+    // Example with IPI mailbox method:
+
+    firmware {
+      zynqmp-firmware {
+        zynqmp-power {
+          compatible = "xlnx,zynqmp-power";
+          interrupt-parent = <&gic>;
+          interrupts = <0 35 4>;
+          mboxes = <&ipi_mailbox_pmu1 0>,
+                   <&ipi_mailbox_pmu1 1>;
+          mbox-names = "tx", "rx";
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
new file mode 100644
index 000000000000..0d5e999a58f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
@@ -0,0 +1,254 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Power Domains
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  Rockchip processors include support for multiple power domains
+  which can be powered up/down by software based on different
+  application scenarios to save power.
+
+  Power domains contained within power-controller node are
+  generic power domain providers documented in
+  Documentation/devicetree/bindings/power/power-domain.yaml.
+
+  IP cores belonging to a power domain should contain a
+  "power-domains" property that is a phandle for the
+  power domain node representing the domain.
+
+properties:
+  $nodename:
+    const: power-controller
+
+  compatible:
+    enum:
+      - rockchip,px30-power-controller
+      - rockchip,rk3036-power-controller
+      - rockchip,rk3066-power-controller
+      - rockchip,rk3128-power-controller
+      - rockchip,rk3188-power-controller
+      - rockchip,rk3228-power-controller
+      - rockchip,rk3288-power-controller
+      - rockchip,rk3328-power-controller
+      - rockchip,rk3366-power-controller
+      - rockchip,rk3368-power-controller
+      - rockchip,rk3399-power-controller
+      - rockchip,rk3568-power-controller
+      - rockchip,rk3588-power-controller
+      - rockchip,rv1126-power-controller
+
+  "#power-domain-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#power-domain-cells"
+
+additionalProperties: false
+
+patternProperties:
+  "^power-domain@[0-9a-f]+$":
+
+    $ref: "#/$defs/pd-node"
+
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^power-domain@[0-9a-f]+$":
+
+        $ref: "#/$defs/pd-node"
+
+        unevaluatedProperties: false
+
+        properties:
+          "#address-cells":
+            const: 1
+
+          "#size-cells":
+            const: 0
+
+        patternProperties:
+          "^power-domain@[0-9a-f]+$":
+
+            $ref: "#/$defs/pd-node"
+
+            unevaluatedProperties: false
+
+            properties:
+              "#power-domain-cells":
+                const: 0
+
+$defs:
+  pd-node:
+    type: object
+    description: |
+      Represents the power domains within the power controller node.
+
+    properties:
+      reg:
+        maxItems: 1
+        description: |
+          Power domain index. Valid values are defined in
+          "include/dt-bindings/power/px30-power.h"
+          "include/dt-bindings/power/rk3036-power.h"
+          "include/dt-bindings/power/rk3066-power.h"
+          "include/dt-bindings/power/rk3128-power.h"
+          "include/dt-bindings/power/rk3188-power.h"
+          "include/dt-bindings/power/rk3228-power.h"
+          "include/dt-bindings/power/rk3288-power.h"
+          "include/dt-bindings/power/rk3328-power.h"
+          "include/dt-bindings/power/rk3366-power.h"
+          "include/dt-bindings/power/rk3368-power.h"
+          "include/dt-bindings/power/rk3399-power.h"
+          "include/dt-bindings/power/rk3568-power.h"
+          "include/dt-bindings/power/rk3588-power.h"
+          "include/dt-bindings/power/rockchip,rv1126-power.h"
+
+      clocks:
+        minItems: 1
+        maxItems: 30
+        description: |
+          A number of phandles to clocks that need to be enabled
+          while power domain switches state.
+
+      pm_qos:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          maxItems: 1
+        description: |
+          A number of phandles to qos blocks which need to be saved and restored
+          while power domain switches state.
+
+      "#power-domain-cells":
+        enum: [0, 1]
+        description:
+          Must be 0 for nodes representing a single PM domain and 1 for nodes
+          providing multiple PM domains.
+
+    required:
+      - reg
+      - "#power-domain-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/power/rk3399-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qos_hdcp: qos@ffa90000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffa90000 0x0 0x20>;
+        };
+
+        qos_iep: qos@ffa98000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffa98000 0x0 0x20>;
+        };
+
+        qos_rga_r: qos@ffab0000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffab0000 0x0 0x20>;
+        };
+
+        qos_rga_w: qos@ffab0080 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffab0080 0x0 0x20>;
+        };
+
+        qos_video_m0: qos@ffab8000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffab8000 0x0 0x20>;
+        };
+
+        qos_video_m1_r: qos@ffac0000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffac0000 0x0 0x20>;
+        };
+
+        qos_video_m1_w: qos@ffac0080 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffac0080 0x0 0x20>;
+        };
+
+        power-management@ff310000 {
+            compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+            reg = <0x0 0xff310000 0x0 0x1000>;
+
+            power-controller {
+                compatible = "rockchip,rk3399-power-controller";
+                #power-domain-cells = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                /* These power domains are grouped by VD_CENTER */
+                power-domain@RK3399_PD_IEP {
+                    reg = <RK3399_PD_IEP>;
+                    clocks = <&cru ACLK_IEP>,
+                             <&cru HCLK_IEP>;
+                    pm_qos = <&qos_iep>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@RK3399_PD_RGA {
+                    reg = <RK3399_PD_RGA>;
+                    clocks = <&cru ACLK_RGA>,
+                             <&cru HCLK_RGA>;
+                    pm_qos = <&qos_rga_r>,
+                             <&qos_rga_w>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@RK3399_PD_VCODEC {
+                    reg = <RK3399_PD_VCODEC>;
+                    clocks = <&cru ACLK_VCODEC>,
+                             <&cru HCLK_VCODEC>;
+                    pm_qos = <&qos_video_m0>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@RK3399_PD_VDU {
+                    reg = <RK3399_PD_VDU>;
+                    clocks = <&cru ACLK_VDU>,
+                             <&cru HCLK_VDU>;
+                    pm_qos = <&qos_video_m1_r>,
+                             <&qos_video_m1_w>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@RK3399_PD_VIO {
+                    reg = <RK3399_PD_VIO>;
+                    #power-domain-cells = <1>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    power-domain@RK3399_PD_HDCP {
+                        reg = <RK3399_PD_HDCP>;
+                        clocks = <&cru ACLK_HDCP>,
+                                 <&cru HCLK_HDCP>,
+                                 <&cru PCLK_HDCP>;
+                        pm_qos = <&qos_hdcp>;
+                        #power-domain-cells = <0>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
deleted file mode 100644
index e66fd4eab71c..000000000000
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-Rockchip SRAM for IO Voltage Domains:
--------------------------------------
-
-IO domain voltages on some Rockchip SoCs are variable but need to be
-kept in sync between the regulators and the SoC using a special
-register.
-
-A specific example using rk3288:
-- If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then
-  bit 7 of GRF_IO_VSEL needs to be 0.  If the regulator hooked up to
-  that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1.
-
-Said another way, this driver simply handles keeping bits in the SoC's
-general register file (GRF) in sync with the actual value of a voltage
-hooked up to the pins.
-
-Note that this driver specifically doesn't include:
-- any logic for deciding what voltage we should set regulators to
-- any logic for deciding whether regulators (or internal SoC blocks)
-  should have power or not have power
-
-If there were some other software that had the smarts of making
-decisions about regulators, it would work in conjunction with this
-driver.  When that other software adjusted a regulator's voltage then
-this driver would handle telling the SoC about it.  A good example is
-vqmmc for SD.  In that case the dw_mmc driver simply is told about a
-regulator.  It changes the regulator between 3.3V and 1.8V at the
-right time.  This driver notices the change and makes sure that the
-SoC is on the same page.
-
-
-Required properties:
-- compatible: should be one of:
-  - "rockchip,px30-io-voltage-domain" for px30
-  - "rockchip,px30-pmu-io-voltage-domain" for px30 pmu-domains
-  - "rockchip,rk3188-io-voltage-domain" for rk3188
-  - "rockchip,rk3228-io-voltage-domain" for rk3228
-  - "rockchip,rk3288-io-voltage-domain" for rk3288
-  - "rockchip,rk3328-io-voltage-domain" for rk3328
-  - "rockchip,rk3368-io-voltage-domain" for rk3368
-  - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains
-  - "rockchip,rk3399-io-voltage-domain" for rk3399
-  - "rockchip,rk3399-pmu-io-voltage-domain" for rk3399 pmu-domains
-  - "rockchip,rv1108-io-voltage-domain" for rv1108
-  - "rockchip,rv1108-pmu-io-voltage-domain" for rv1108 pmu-domains
-
-Deprecated properties:
-- rockchip,grf: phandle to the syscon managing the "general register files"
-    Systems should move the io-domains to a sub-node of the grf simple-mfd.
-
-You specify supplies using the standard regulator bindings by including
-a phandle the relevant regulator.  All specified supplies must be able
-to report their voltage.  The IO Voltage Domain for any non-specified
-supplies will be not be touched.
-
-Possible supplies for PX30:
-- vccio6-supply: The supply connected to VCCIO6.
-- vccio1-supply: The supply connected to VCCIO1.
-- vccio2-supply: The supply connected to VCCIO2.
-- vccio3-supply: The supply connected to VCCIO3.
-- vccio4-supply: The supply connected to VCCIO4.
-- vccio5-supply: The supply connected to VCCIO5.
-- vccio-oscgpi-supply: The supply connected to VCCIO_OSCGPI.
-
-Possible supplies for PX30 pmu-domains:
-- pmuio1-supply: The supply connected to PMUIO1.
-- pmuio2-supply: The supply connected to PMUIO2.
-
-Possible supplies for rk3188:
-- ap0-supply:    The supply connected to AP0_VCC.
-- ap1-supply:    The supply connected to AP1_VCC.
-- cif-supply:    The supply connected to CIF_VCC.
-- flash-supply:  The supply connected to FLASH_VCC.
-- lcdc0-supply:  The supply connected to LCD0_VCC.
-- lcdc1-supply:  The supply connected to LCD1_VCC.
-- vccio0-supply: The supply connected to VCCIO0.
-- vccio1-supply: The supply connected to VCCIO1.
-                 Sometimes also labeled VCCIO1 and VCCIO2.
-
-Possible supplies for rk3228:
-- vccio1-supply: The supply connected to VCCIO1.
-- vccio2-supply: The supply connected to VCCIO2.
-- vccio3-supply: The supply connected to VCCIO3.
-- vccio4-supply: The supply connected to VCCIO4.
-
-Possible supplies for rk3288:
-- audio-supply:  The supply connected to APIO4_VDD.
-- bb-supply:     The supply connected to APIO5_VDD.
-- dvp-supply:    The supply connected to DVPIO_VDD.
-- flash0-supply: The supply connected to FLASH0_VDD.  Typically for eMMC
-- flash1-supply: The supply connected to FLASH1_VDD.  Also known as SDIO1.
-- gpio30-supply: The supply connected to APIO1_VDD.
-- gpio1830       The supply connected to APIO2_VDD.
-- lcdc-supply:   The supply connected to LCDC_VDD.
-- sdcard-supply: The supply connected to SDMMC0_VDD.
-- wifi-supply:   The supply connected to APIO3_VDD.  Also known as SDIO0.
-
-Possible supplies for rk3368:
-- audio-supply:  The supply connected to APIO3_VDD.
-- dvp-supply:    The supply connected to DVPIO_VDD.
-- flash0-supply: The supply connected to FLASH0_VDD.  Typically for eMMC
-- gpio30-supply: The supply connected to APIO1_VDD.
-- gpio1830       The supply connected to APIO4_VDD.
-- sdcard-supply: The supply connected to SDMMC0_VDD.
-- wifi-supply:   The supply connected to APIO2_VDD.  Also known as SDIO0.
-
-Possible supplies for rk3368 pmu-domains:
-- pmu-supply:    The supply connected to PMUIO_VDD.
-- vop-supply:    The supply connected to LCDC_VDD.
-
-Possible supplies for rk3399:
-- bt656-supply:  The supply connected to APIO2_VDD.
-- audio-supply:  The supply connected to APIO5_VDD.
-- sdmmc-supply:  The supply connected to SDMMC0_VDD.
-- gpio1830       The supply connected to APIO4_VDD.
-
-Possible supplies for rk3399 pmu-domains:
-- pmu1830-supply:The supply connected to PMUIO2_VDD.
-
-Example:
-
-	io-domains {
-		compatible = "rockchip,rk3288-io-voltage-domain";
-		rockchip,grf = <&grf>;
-
-		audio-supply = <&vcc18_codec>;
-		bb-supply = <&vcc33_io>;
-		dvp-supply = <&vcc_18>;
-		flash0-supply = <&vcc18_flashio>;
-		gpio1830-supply = <&vcc33_io>;
-		gpio30-supply = <&vcc33_pmuio>;
-		lcdc-supply = <&vcc33_lcd>;
-		sdcard-supply = <&vccio_sd>;
-		wifi-supply = <&vcc18_wl>;
-	};
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml
new file mode 100644
index 000000000000..d71fc72d4464
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml
@@ -0,0 +1,390 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/rockchip-io-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SRAM for IO Voltage Domains
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  IO domain voltages on some Rockchip SoCs are variable but need to be
+  kept in sync between the regulators and the SoC using a special
+  register.
+
+  A specific example using rk3288
+    If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then
+    bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to
+    that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1.
+
+  Said another way, this driver simply handles keeping bits in the SoCs
+  General Register File (GRF) in sync with the actual value of a voltage
+  hooked up to the pins.
+
+  Note that this driver specifically does not include
+    any logic for deciding what voltage we should set regulators to
+    any logic for deciding whether regulators (or internal SoC blocks)
+    should have power or not have power
+
+  If there were some other software that had the smarts of making
+  decisions about regulators, it would work in conjunction with this
+  driver. When that other software adjusted a regulators voltage then
+  this driver would handle telling the SoC about it. A good example is
+  vqmmc for SD. In that case the dw_mmc driver simply is told about a
+  regulator. It changes the regulator between 3.3V and 1.8V at the
+  right time. This driver notices the change and makes sure that the
+  SoC is on the same page.
+
+  You specify supplies using the standard regulator bindings by including
+  a phandle the relevant regulator. All specified supplies must be able
+  to report their voltage. The IO Voltage Domain for any non-specified
+  supplies will be not be touched.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-io-voltage-domain
+      - rockchip,px30-pmu-io-voltage-domain
+      - rockchip,rk3188-io-voltage-domain
+      - rockchip,rk3228-io-voltage-domain
+      - rockchip,rk3288-io-voltage-domain
+      - rockchip,rk3328-io-voltage-domain
+      - rockchip,rk3368-io-voltage-domain
+      - rockchip,rk3368-pmu-io-voltage-domain
+      - rockchip,rk3399-io-voltage-domain
+      - rockchip,rk3399-pmu-io-voltage-domain
+      - rockchip,rk3568-pmu-io-voltage-domain
+      - rockchip,rv1108-io-voltage-domain
+      - rockchip,rv1108-pmu-io-voltage-domain
+      - rockchip,rv1126-pmu-io-voltage-domain
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: "#/$defs/px30"
+  - $ref: "#/$defs/px30-pmu"
+  - $ref: "#/$defs/rk3188"
+  - $ref: "#/$defs/rk3228"
+  - $ref: "#/$defs/rk3288"
+  - $ref: "#/$defs/rk3328"
+  - $ref: "#/$defs/rk3368"
+  - $ref: "#/$defs/rk3368-pmu"
+  - $ref: "#/$defs/rk3399"
+  - $ref: "#/$defs/rk3399-pmu"
+  - $ref: "#/$defs/rk3568-pmu"
+  - $ref: "#/$defs/rv1108"
+  - $ref: "#/$defs/rv1108-pmu"
+  - $ref: "#/$defs/rv1126-pmu"
+
+$defs:
+  px30:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-io-voltage-domain
+
+    then:
+      properties:
+        vccio1-supply:
+          description: The supply connected to VCCIO1.
+        vccio2-supply:
+          description: The supply connected to VCCIO2.
+        vccio3-supply:
+          description: The supply connected to VCCIO3.
+        vccio4-supply:
+          description: The supply connected to VCCIO4.
+        vccio5-supply:
+          description: The supply connected to VCCIO5.
+        vccio6-supply:
+          description: The supply connected to VCCIO6.
+        vccio-oscgpi-supply:
+          description: The supply connected to VCCIO_OSCGPI.
+
+  px30-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-pmu-io-voltage-domain
+
+    then:
+      properties:
+        pmuio1-supply:
+          description: The supply connected to PMUIO1.
+        pmuio2-supply:
+          description: The supply connected to PMUIO2.
+
+  rk3188:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3188-io-voltage-domain
+
+    then:
+      properties:
+        ap0-supply:
+          description: The supply connected to AP0_VCC.
+        ap1-supply:
+          description: The supply connected to AP1_VCC.
+        cif-supply:
+          description: The supply connected to CIF_VCC.
+        flash-supply:
+          description: The supply connected to FLASH_VCC.
+        lcdc0-supply:
+          description: The supply connected to LCD0_VCC.
+        lcdc1-supply:
+          description: The supply connected to LCD1_VCC.
+        vccio0-supply:
+          description: The supply connected to VCCIO0.
+        vccio1-supply:
+          description: The supply connected to VCCIO1. Also labeled as VCCIO2.
+
+  rk3228:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3228-io-voltage-domain
+
+    then:
+      properties:
+        vccio1-supply:
+          description: The supply connected to VCCIO1.
+        vccio2-supply:
+          description: The supply connected to VCCIO2.
+        vccio3-supply:
+          description: The supply connected to VCCIO3.
+        vccio4-supply:
+          description: The supply connected to VCCIO4.
+
+  rk3288:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-io-voltage-domain
+
+    then:
+      properties:
+        audio-supply:
+          description: The supply connected to APIO4_VDD.
+        bb-supply:
+          description: The supply connected to APIO5_VDD.
+        dvp-supply:
+          description: The supply connected to DVPIO_VDD.
+        flash0-supply:
+          description: The supply connected to FLASH0_VDD. Typically for eMMC.
+        flash1-supply:
+          description: The supply connected to FLASH1_VDD. Also known as SDIO1.
+        gpio30-supply:
+          description: The supply connected to APIO1_VDD.
+        gpio1830-supply:
+          description: The supply connected to APIO2_VDD.
+        lcdc-supply:
+          description: The supply connected to LCDC_VDD.
+        sdcard-supply:
+          description: The supply connected to SDMMC0_VDD.
+        wifi-supply:
+          description: The supply connected to APIO3_VDD. Also known as SDIO0.
+
+  rk3328:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3328-io-voltage-domain
+
+    then:
+      properties:
+        vccio1-supply:
+          description: The supply connected to VCCIO1.
+        vccio2-supply:
+          description: The supply connected to VCCIO2.
+        vccio3-supply:
+          description: The supply connected to VCCIO3.
+        vccio4-supply:
+          description: The supply connected to VCCIO4.
+        vccio5-supply:
+          description: The supply connected to VCCIO5.
+        vccio6-supply:
+          description: The supply connected to VCCIO6.
+        pmuio-supply:
+          description: The supply connected to VCCIO_PMU.
+
+  rk3368:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3368-io-voltage-domain
+
+    then:
+      properties:
+        audio-supply:
+          description: The supply connected to APIO3_VDD.
+        dvp-supply:
+          description: The supply connected to DVPIO_VDD.
+        flash0-supply:
+          description: The supply connected to FLASH0_VDD. Typically for eMMC.
+        gpio30-supply:
+          description: The supply connected to APIO1_VDD.
+        gpio1830-supply:
+          description: The supply connected to APIO4_VDD.
+        sdcard-supply:
+          description: The supply connected to SDMMC0_VDD.
+        wifi-supply:
+          description: The supply connected to APIO2_VDD. Also known as SDIO0.
+
+  rk3368-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3368-pmu-io-voltage-domain
+
+    then:
+      properties:
+        pmu-supply:
+          description: The supply connected to PMUIO_VDD.
+        vop-supply:
+          description: The supply connected to LCDC_VDD.
+
+  rk3399:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-io-voltage-domain
+
+    then:
+      properties:
+        audio-supply:
+          description: The supply connected to APIO5_VDD.
+        bt656-supply:
+          description: The supply connected to APIO2_VDD.
+        gpio1830-supply:
+          description: The supply connected to APIO4_VDD.
+        sdmmc-supply:
+          description: The supply connected to SDMMC0_VDD.
+
+  rk3399-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-pmu-io-voltage-domain
+
+    then:
+      properties:
+        pmu1830-supply:
+          description: The supply connected to PMUIO2_VDD.
+
+  rk3568-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-pmu-io-voltage-domain
+
+    then:
+      properties:
+        pmuio1-supply:
+          description: The supply connected to PMUIO1.
+        pmuio2-supply:
+          description: The supply connected to PMUIO2.
+        vccio1-supply:
+          description: The supply connected to VCCIO1.
+        vccio2-supply:
+          description: The supply connected to VCCIO2.
+        vccio3-supply:
+          description: The supply connected to VCCIO3.
+        vccio4-supply:
+          description: The supply connected to VCCIO4.
+        vccio5-supply:
+          description: The supply connected to VCCIO5.
+        vccio6-supply:
+          description: The supply connected to VCCIO6.
+        vccio7-supply:
+          description: The supply connected to VCCIO7.
+
+  rv1108:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rv1108-io-voltage-domain
+
+    then:
+      properties:
+        vccio1-supply:
+          description: The supply connected to APIO1_VDD.
+        vccio2-supply:
+          description: The supply connected to APIO2_VDD.
+        vccio3-supply:
+          description: The supply connected to APIO3_VDD.
+        vccio5-supply:
+          description: The supply connected to APIO5_VDD.
+        vccio6-supply:
+          description: The supply connected to APIO6_VDD.
+
+  rv1108-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rv1108-pmu-io-voltage-domain
+
+    then:
+      properties:
+        pmu-supply:
+          description: The supply connected to PMUIO_VDD.
+
+  rv1126-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rv1126-pmu-io-voltage-domain
+
+    then:
+      properties:
+        vccio1-supply:
+          description: The supply connected to VCCIO1.
+        vccio2-supply:
+          description: The supply connected to VCCIO2.
+        vccio3-supply:
+          description: The supply connected to VCCIO3.
+        vccio4-supply:
+          description: The supply connected to VCCIO4.
+        vccio5-supply:
+          description: The supply connected to VCCIO5.
+        vccio6-supply:
+          description: The supply connected to VCCIO6.
+        vccio7-supply:
+          description: The supply connected to VCCIO7.
+        pmuio0-supply:
+          description: The supply connected to PMUIO0.
+        pmuio1-supply:
+          description: The supply connected to PMUIO1.
+
+examples:
+  - |
+    io-domains {
+      compatible = "rockchip,rk3288-io-voltage-domain";
+      audio-supply = <&vcc18_codec>;
+      bb-supply = <&vcc33_io>;
+      dvp-supply = <&vcc_18>;
+      flash0-supply = <&vcc18_flashio>;
+      gpio1830-supply = <&vcc33_io>;
+      gpio30-supply = <&vcc33_pmuio>;
+      lcdc-supply = <&vcc33_lcd>;
+      sdcard-supply = <&vccio_sd>;
+      wifi-supply = <&vcc18_wl>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt b/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt
deleted file mode 100644
index f181e46d8e07..000000000000
--- a/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-=== AB8500 Battery Temperature Monitor Driver ===
-
-The properties below describes the node for btemp driver.
-
-Required Properties:
-- compatible = Shall be: "stericsson,ab8500-btemp"
-- battery = Shall be battery specific information
-
-	Example:
-	ab8500_btemp {
-		compatible = "stericsson,ab8500-btemp";
-		battery	   = <&ab8500_battery>;
-	};
-
-For information on battery specific node, Ref:
-Documentation/devicetree/bindings/power/supply/ab8500/fg.txt
diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt b/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt
deleted file mode 100644
index 56636f927203..000000000000
--- a/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-=== AB8500 Charging Algorithm Driver ===
-
-The properties below describes the node for chargalg driver.
-
-Required Properties:
-- compatible = Shall be: "stericsson,ab8500-chargalg"
-- battery = Shall be battery specific information
-
-Example:
-ab8500_chargalg {
-	compatible = "stericsson,ab8500-chargalg";
-	battery	   = <&ab8500_battery>;
-};
-
-For information on battery specific node, Ref:
-Documentation/devicetree/bindings/power/supply/ab8500/fg.txt
diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt b/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt
deleted file mode 100644
index 24ada03e07b4..000000000000
--- a/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-=== AB8500 Charger Driver ===
-
-Required Properties:
-- compatible = Shall be "stericsson,ab8500-charger"
-- battery = Shall be battery specific information
-	Example:
-	ab8500_charger {
-		compatible = "stericsson,ab8500-charger";
-		battery	   = <&ab8500_battery>;
-	};
-
-- vddadc-supply: Supply for USB and Main charger
-	Example:
-	ab8500-charger {
-		vddadc-supply	= <&ab8500_ldo_tvout_reg>;
-	}
-- autopower_cfg:
-	Boolean value depicting the presence of 'automatic poweron after powerloss'
-	Example:
-	ab8500-charger {
-		autopower_cfg;
-	};
-
-For information on battery specific node, Ref:
-Documentation/devicetree/bindings/power/supply/ab8500/fg.txt
diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/fg.txt b/Documentation/devicetree/bindings/power/supply/ab8500/fg.txt
deleted file mode 100644
index ccafcb9112fb..000000000000
--- a/Documentation/devicetree/bindings/power/supply/ab8500/fg.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-=== AB8500 Fuel Gauge Driver ===
-
-AB8500 is a mixed signal multimedia and power management
-device comprising: power and energy-management-module,
-wall-charger, usb-charger, audio codec, general purpose adc,
-tvout, clock management and sim card interface.
-
-Fuelgauge support is part of energy-management-modules, other
-components of this module are:
-main-charger, usb-combo-charger and battery-temperature-monitoring.
-
-The properties below describes the node for fuelgauge driver.
-
-Required Properties:
-- compatible = This shall be: "stericsson,ab8500-fg"
-- battery = Shall be battery specific information
-	Example:
-	ab8500_fg {
-		compatible = "stericsson,ab8500-fg";
-		battery	   = <&ab8500_battery>;
-	};
-
-dependent node:
-	ab8500_battery: ab8500_battery {
-	};
-	This node will provide information on 'thermistor interface' and
-	'battery technology type' used.
-
-Properties of this node are:
-thermistor-on-batctrl:
-	A boolean value indicating thermistor interface	to battery
-
-	Note:
-	'btemp' and 'batctrl' are the pins interfaced for battery temperature
-	measurement, 'btemp' signal is used when NTC(negative temperature
-	coefficient) resister is interfaced external to battery whereas
-	'batctrl' pin is used when NTC resister is internal to battery.
-
-	Example:
-	ab8500_battery: ab8500_battery {
-		thermistor-on-batctrl;
-	};
-	indicates: NTC resister is internal to battery, 'batctrl' is used
-		for thermal measurement.
-
-	The absence of property 'thermal-on-batctrl' indicates
-	NTC resister is external to battery and  'btemp' signal is used
-	for thermal measurement.
-
-battery-type:
-	This shall be the battery manufacturing technology type,
-	allowed types are:
-		"UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn"
-	Example:
-	ab8500_battery: ab8500_battery {
-		stericsson,battery-type = "LIPO";
-	}
-
diff --git a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
deleted file mode 100644
index c7dfb7cecf40..000000000000
--- a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device
-
-Required properties:
- - compatible: "active-semi,act8945a-charger".
- - active-semi,chglev-gpios: charge current level phandle with args
-   as described in ../gpio/gpio.txt.
- - active-semi,lbo-gpios: specify the low battery voltage detect phandle
-   with args as as described in ../gpio/gpio.txt.
- - interrupts: <a b> where a is the interrupt number and b is a
-   field that represents an encoding of the sense and level
-   information for the interrupt.
-
-Optional properties:
- - active-semi,input-voltage-threshold-microvolt: unit: mV;
-   Specifies the charger's input over-voltage threshold value;
-   The value can be: 6600, 7000, 7500, 8000; default: 6600
- - active-semi,precondition-timeout: unit: minutes;
-   Specifies the charger's PRECONDITION safety timer setting value;
-   The value can be: 40, 60, 80, 0; If 0, it means to disable this timer;
-   default: 40.
- - active-semi,total-timeout: unit: hours;
-   Specifies the charger's total safety timer setting value;
-   The value can be: 3, 4, 5, 0; If 0, it means to disable this timer;
-   default: 3.
-
-Example:
-	pmic@5b {
-		compatible = "active-semi,act8945a";
-		reg = <0x5b>;
-
-		charger {
-			compatible = "active-semi,act8945a-charger";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
-			interrupt-parent = <&pioA>;
-			interrupts = <45 GPIO_ACTIVE_LOW>;
-
-			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
-			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
-			active-semi,input-voltage-threshold-microvolt = <6600>;
-			active-semi,precondition-timeout = <40>;
-			active-semi,total-timeout = <3>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
new file mode 100644
index 000000000000..5220d9cb16d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8945A Charger Function
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: active-semi,act8945a-charger
+
+  interrupts:
+    maxItems: 1
+
+  active-semi,chglev-gpios:
+    maxItems: 1
+    description: charge current level GPIO
+
+  active-semi,lbo-gpios:
+    maxItems: 1
+    description: low battery voltage detect GPIO
+
+  active-semi,input-voltage-threshold-microvolt:
+    description: |
+      Specifies the charger's input over-voltage threshold value.
+      Despite the name, specified values are in millivolt (mV).
+      Defaults to 6.6 V
+    enum: [ 6600, 7000, 7500, 8000 ]
+
+  active-semi,precondition-timeout:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the charger's PRECONDITION safety timer setting value in minutes.
+      If 0, it means to disable this timer.
+      Defaults to 40 minutes.
+    enum: [ 0, 40, 60, 80 ]
+
+  active-semi,total-timeout:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the charger's total safety timer setting value in hours;
+      If 0, it means to disable this timer;
+      Defaults to 3 hours.
+    enum: [ 0, 3, 4, 5 ]
+
+required:
+  - compatible
+  - interrupts
+  - active-semi,chglev-gpios
+  - active-semi,lbo-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      charger {
+        compatible = "active-semi,act8945a-charger";
+        interrupt-parent = <&pioA>;
+        interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+        active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+        active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+        active-semi,input-voltage-threshold-microvolt = <6600>;
+        active-semi,precondition-timeout = <40>;
+        active-semi,total-timeout = <3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt
deleted file mode 100644
index 7a1fb532abe5..000000000000
--- a/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-AXP20X and AXP22X PMICs' AC power supply
-
-Required Properties:
- - compatible: One of:
-			"x-powers,axp202-ac-power-supply"
-			"x-powers,axp221-ac-power-supply"
-			"x-powers,axp813-ac-power-supply"
-
-This node is a subnode of the axp20x PMIC.
-
-The AXP20X can read the current current and voltage supplied by AC by
-reading ADC channels from the AXP20X ADC.
-
-The AXP22X is only able to tell if an AC power supply is present and
-usable.
-
-AXP813/AXP803 are able to limit current and supply voltage
-
-Example:
-
-&axp209 {
-	ac_power_supply: ac-power-supply {
-		compatible = "x-powers,axp202-ac-power-supply";
-	};
-};
diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt b/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt
deleted file mode 100644
index 41916f69902c..000000000000
--- a/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-AXP20x and AXP22x battery power supply
-
-Required Properties:
- - compatible, one of:
-			"x-powers,axp209-battery-power-supply"
-			"x-powers,axp221-battery-power-supply"
-			"x-powers,axp813-battery-power-supply"
-
-This node is a subnode of its respective PMIC DT node.
-
-The supported devices can read the battery voltage, charge and discharge
-currents of the battery by reading ADC channels from the ADC.
-
-Example:
-
-&axp209 {
-	battery_power_supply: battery-power-supply {
-		compatible = "x-powers,axp209-battery-power-supply";
-	}
-};
diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt
deleted file mode 100644
index b2d4968fde7d..000000000000
--- a/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-AXP20x USB power supply
-
-Required Properties:
--compatible: One of: "x-powers,axp202-usb-power-supply"
-                     "x-powers,axp221-usb-power-supply"
-                     "x-powers,axp223-usb-power-supply"
-		     "x-powers,axp813-usb-power-supply"
-
-The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight
-variations such as the former being able to set the VBUS power supply max
-current to 100mA, unlike the latter.
-
-This node is a subnode of the axp20x PMIC.
-
-Example:
-
-axp209: pmic@34 {
-	compatible = "x-powers,axp209";
-	reg = <0x34>;
-	interrupt-parent = <&nmi_intc>;
-	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	regulators {
-		x-powers,dcdc-freq = <1500>;
-
-		vdd_cpu: dcdc2 {
-			regulator-always-on;
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1450000>;
-			regulator-name = "vdd-cpu";
-		};
-
-		...
-	};
-
-	usb-power-supply: usb-power-supply {
-		compatible = "x-powers,axp202-usb-power-supply";
-	};
-};
diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt
deleted file mode 100644
index 3049cf88bdcf..000000000000
--- a/Documentation/devicetree/bindings/power/supply/battery.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Battery Characteristics
-
-The devicetree battery node provides static battery characteristics.
-In smart batteries, these are typically stored in non-volatile memory
-on a fuel gauge chip. The battery node should be used where there is
-no appropriate non-volatile memory, or it is unprogrammed/incorrect.
-
-Upstream dts files should not include battery nodes, unless the battery
-represented cannot easily be replaced in the system by one of a
-different type. This prevents unpredictable, potentially harmful,
-behavior should a replacement that changes the battery type occur
-without a corresponding update to the dtb.
-
-Required Properties:
- - compatible: Must be "simple-battery"
-
-Optional Properties:
- - voltage-min-design-microvolt: drained battery voltage
- - voltage-max-design-microvolt: fully charged battery voltage
- - energy-full-design-microwatt-hours: battery design energy
- - charge-full-design-microamp-hours: battery design capacity
- - precharge-current-microamp: current for pre-charge phase
- - charge-term-current-microamp: current for charge termination phase
- - constant-charge-current-max-microamp: maximum constant input current
- - constant-charge-voltage-max-microvolt: maximum constant input voltage
- - factory-internal-resistance-micro-ohms: battery factory internal resistance
- - ocv-capacity-table-0: An array providing the open circuit voltage (OCV)
-   of the battery and corresponding battery capacity percent, which is used
-   to look up battery capacity according to current OCV value. And the open
-   circuit voltage unit is microvolt.
- - ocv-capacity-table-1: Same as ocv-capacity-table-0
- ......
- - ocv-capacity-table-n: Same as ocv-capacity-table-0
- - ocv-capacity-celsius: An array containing the temperature in degree Celsius,
-   for each of the battery capacity lookup table. The first temperature value
-   specifies the OCV table 0, and the second temperature value specifies the
-   OCV table 1, and so on.
- - resistance-temp-table: An array providing the temperature in degree Celsius
-   and corresponding battery internal resistance percent, which is used to look
-   up the resistance percent according to current temperature to get a accurate
-   batterty internal resistance in different temperatures.
-
-Battery properties are named, where possible, for the corresponding
-elements in enum power_supply_property, defined in
-https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/power_supply.h
-
-Batteries must be referenced by chargers and/or fuel-gauges
-using a phandle. The phandle's property should be named
-"monitored-battery".
-
-Example:
-
-	bat: battery {
-		compatible = "simple-battery";
-		voltage-min-design-microvolt = <3200000>;
-		voltage-max-design-microvolt = <4200000>;
-		energy-full-design-microwatt-hours = <5290000>;
-		charge-full-design-microamp-hours = <1430000>;
-		precharge-current-microamp = <256000>;
-		charge-term-current-microamp = <128000>;
-		constant-charge-current-max-microamp = <900000>;
-		constant-charge-voltage-max-microvolt = <4200000>;
-		factory-internal-resistance-micro-ohms = <250000>;
-		ocv-capacity-celsius = <(-10) 0 10>;
-		ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...;
-		ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>, ...;
-		ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>, ...;
-		resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
-	};
-
-	charger: charger@11 {
-		....
-		monitored-battery = <&bat>;
-		...
-	};
-
-	fuel_gauge: fuel-gauge@22 {
-		....
-		monitored-battery = <&bat>;
-		...
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml
new file mode 100644
index 000000000000..491488e7b970
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/battery.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery Characteristics
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  The devicetree battery node provides static battery characteristics.
+  In smart batteries, these are typically stored in non-volatile memory
+  on a fuel gauge chip. The battery node should be used where there is
+  no appropriate non-volatile memory, or it is unprogrammed/incorrect.
+
+  Upstream dts files should not include battery nodes, unless the battery
+  represented cannot easily be replaced in the system by one of a
+  different type. This prevents unpredictable, potentially harmful,
+  behavior should a replacement that changes the battery type occur
+  without a corresponding update to the dtb.
+
+  Battery properties are named, where possible, for the corresponding elements
+  in enum power_supply_property, defined in include/linux/power_supply.h
+
+  Batteries must be referenced by chargers and/or fuel-gauges using a phandle.
+  The phandle's property should be named "monitored-battery".
+
+properties:
+  compatible:
+    const: simple-battery
+
+  device-chemistry:
+    description: This describes the chemical technology of the battery.
+    oneOf:
+      - const: nickel-cadmium
+      - const: nickel-metal-hydride
+      - const: lithium-ion
+        description: This is a blanket type for all lithium-ion batteries,
+          including those below. If possible, a precise compatible string
+          from below should be used, but sometimes it is unknown which specific
+          lithium ion battery is employed and this wide compatible can be used.
+      - const: lithium-ion-polymer
+      - const: lithium-ion-iron-phosphate
+      - const: lithium-ion-manganese-oxide
+
+  over-voltage-threshold-microvolt:
+    description: battery over-voltage limit
+
+  re-charge-voltage-microvolt:
+    description: limit to automatically start charging again
+
+  voltage-min-design-microvolt:
+    description: drained battery voltage
+
+  voltage-max-design-microvolt:
+    description: fully charged battery voltage
+
+  energy-full-design-microwatt-hours:
+    description: battery design energy
+
+  charge-full-design-microamp-hours:
+    description: battery design capacity
+
+  trickle-charge-current-microamp:
+    description: current for trickle-charge phase
+
+  precharge-current-microamp:
+    description: current for pre-charge phase
+
+  precharge-upper-limit-microvolt:
+    description: limit when to change to constant charging
+
+  charge-term-current-microamp:
+    description: current for charge termination phase
+
+  constant-charge-current-max-microamp:
+    description: maximum constant input current
+
+  constant-charge-voltage-max-microvolt:
+    description: maximum constant input voltage
+
+  factory-internal-resistance-micro-ohms:
+    description: battery factory internal resistance
+
+  resistance-temp-table:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: the temperature in degree Celsius
+        - description: battery internal resistance percent
+    description: |
+      A table providing the temperature in degree Celsius
+      and corresponding battery internal resistance percent, which is used to
+      look up the resistance percent according to current temperature to get an
+      accurate batterty internal resistance in different temperatures.
+
+  ocv-capacity-celsius:
+    description: |
+      An array containing the temperature in degree Celsius,
+      for each of the battery capacity lookup table.
+
+  operating-range-celsius:
+    description: operating temperature range of a battery
+    items:
+      - description: minimum temperature at which battery can operate
+      - description: maximum temperature at which battery can operate
+
+  ambient-celsius:
+    description: safe range of ambient temperature
+    items:
+      - description: alert when ambient temperature is lower than this value
+      - description: alert when ambient temperature is higher than this value
+
+  alert-celsius:
+    description: safe range of battery temperature
+    items:
+      - description: alert when battery temperature is lower than this value
+      - description: alert when battery temperature is higher than this value
+
+required:
+  - compatible
+
+patternProperties:
+  '^ocv-capacity-table-[0-9]+$':
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      An array providing the open circuit voltage (OCV)
+      of the battery and corresponding battery capacity percent, which is used
+      to look up battery capacity according to current OCV value. And the open
+      circuit voltage unit is microvolt.
+    maxItems: 100
+    items:
+      items:
+        - description: open circuit voltage (OCV) in microvolts
+        - description: battery capacity percent
+          maximum: 100
+
+additionalProperties: false
+
+examples:
+  - |
+    power {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery: battery {
+        compatible = "simple-battery";
+        over-voltage-threshold-microvolt = <4500000>;
+        re-charge-voltage-microvolt = <250000>;
+        voltage-min-design-microvolt = <3200000>;
+        voltage-max-design-microvolt = <4200000>;
+        energy-full-design-microwatt-hours = <5290000>;
+        charge-full-design-microamp-hours = <1430000>;
+        precharge-current-microamp = <256000>;
+        precharge-upper-limit-microvolt = <2500000>;
+        charge-term-current-microamp = <128000>;
+        constant-charge-current-max-microamp = <900000>;
+        constant-charge-voltage-max-microvolt = <4200000>;
+        factory-internal-resistance-micro-ohms = <250000>;
+        ocv-capacity-celsius = <(-10) 0 10>;
+        /* table for -10 degree Celsius */
+        ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>;
+        /* table for 0 degree Celsius */
+        ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>;
+        /* table for 10 degree Celsius */
+        ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>;
+        resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
+        operating-range-celsius = <(-30) 50>;
+        ambient-celsius = <(-5) 50>;
+        alert-celsius = <0 40>;
+      };
+
+      charger@11 {
+        reg = <0x11>;
+        monitored-battery = <&battery>;
+      };
+
+      fuel-gauge@22 {
+        reg = <0x22>;
+        monitored-battery = <&battery>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.txt b/Documentation/devicetree/bindings/power/supply/bq2415x.txt
deleted file mode 100644
index d0327f0b59ad..000000000000
--- a/Documentation/devicetree/bindings/power/supply/bq2415x.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Binding for TI bq2415x Li-Ion Charger
-
-Required properties:
-- compatible: Should contain one of the following:
- * "ti,bq24150"
- * "ti,bq24150"
- * "ti,bq24150a"
- * "ti,bq24151"
- * "ti,bq24151a"
- * "ti,bq24152"
- * "ti,bq24153"
- * "ti,bq24153a"
- * "ti,bq24155"
- * "ti,bq24156"
- * "ti,bq24156a"
- * "ti,bq24158"
-- reg:			   integer, i2c address of the device.
-- ti,current-limit:	   integer, initial maximum current charger can pull
-			   from power supply in mA.
-- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
-			   The chip will use slow precharge if battery voltage
-			   is below this value.
-- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
-- ti,charge-current:	   integer, maximum charging current in mA.
-- ti,termination-current:  integer, charge will be terminated when current in
-			   constant-voltage phase drops below this value (in mA).
-- ti,resistor-sense:	   integer, value of sensing resistor in milliohm.
-
-Optional properties:
-- ti,usb-charger-detection: phandle to usb charger detection device.
-			    (required for auto mode)
-
-Example from Nokia N900:
-
-bq24150a {
-	compatible = "ti,bq24150a";
-	reg = <0x6b>;
-
-	ti,current-limit = <100>;
-	ti,weak-battery-voltage = <3400>;
-	ti,battery-regulation-voltage = <4200>;
-	ti,charge-current = <650>;
-	ti,termination-current = <100>;
-	ti,resistor-sense = <68>;
-
-	ti,usb-charger-detection = <&isp1704>;
-};
diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
new file mode 100644
index 000000000000..a3c00e078918
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq2415x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI bq2415x Li-Ion Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq24150
+      - ti,bq24150a
+      - ti,bq24151
+      - ti,bq24151a
+      - ti,bq24152
+      - ti,bq24153
+      - ti,bq24153a
+      - ti,bq24155
+      - ti,bq24156
+      - ti,bq24156a
+      - ti,bq24158
+
+  reg:
+    maxItems: 1
+
+  ti,current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: initial maximum current charger can pull from power supply in mA.
+
+  ti,weak-battery-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      weak battery voltage threshold in mV.
+      The chip will use slow precharge if battery voltage is below this value.
+
+  ti,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging voltage in mV.
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging current in mA.
+
+  ti,termination-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      charge will be terminated when current in constant-voltage phase drops
+      below this value (in mA).
+
+  ti,resistor-sense:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: value of sensing resistor in milliohm.
+
+  ti,usb-charger-detection:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to usb charger detection device (required for auto mode)
+
+required:
+  - compatible
+  - reg
+  - ti,current-limit
+  - ti,weak-battery-voltage
+  - ti,battery-regulation-voltage
+  - ti,charge-current
+  - ti,termination-current
+  - ti,resistor-sense
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6b {
+        compatible = "ti,bq24150a";
+        reg = <0x6b>;
+
+        ti,current-limit = <100>;
+        ti,weak-battery-voltage = <3400>;
+        ti,battery-regulation-voltage = <4200>;
+        ti,charge-current = <650>;
+        ti,termination-current = <100>;
+        ti,resistor-sense = <68>;
+
+        ti,usb-charger-detection = <&isp1704>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt
deleted file mode 100644
index ffe2be408bb6..000000000000
--- a/Documentation/devicetree/bindings/power/supply/bq24190.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-TI BQ24190 Li-Ion Battery Charger
-
-Required properties:
-- compatible: contains one of the following:
-    * "ti,bq24190"
-    * "ti,bq24192"
-    * "ti,bq24192i"
-    * "ti,bq24196"
-- reg: integer, I2C address of the charger.
-- interrupts[-extended]: configuration for charger INT pin.
-
-Optional properties:
-- monitored-battery: phandle of battery characteristics devicetree node
-  The charger uses the following battery properties:
-    + precharge-current-microamp: maximum charge current during precharge
-      phase (typically 20% of battery capacity).
-    + charge-term-current-microamp: a charge cycle terminates when the
-      battery voltage is above recharge threshold, and the current is below
-      this setting (typically 10% of battery capacity).
-  See also Documentation/devicetree/bindings/power/supply/battery.txt
-- ti,system-minimum-microvolt: when power is connected and the battery is below
-  minimum system voltage, the system will be regulated above this setting.
-
-child nodes:
-- usb-otg-vbus:
-  Usage: optional
-  Description: Regulator that is used to control the VBUS voltage direction for
-               either USB host mode or for charging on the OTG port.
-
-Notes:
-- Some circuit boards wire the chip's "OTG" pin high (enabling 500mA default
-  charge current on USB SDP ports, among other features). To simulate this on
-  boards that wire the pin to a GPIO, set a gpio-hog.
-
-Example:
-
-	bat: battery {
-		compatible = "simple-battery";
-		precharge-current-microamp = <256000>;
-		charge-term-current-microamp = <128000>;
-		// etc.
-	};
-
-	bq24190: charger@6a {
-		compatible = "ti,bq24190";
-		reg = <0x6a>;
-		interrupts-extended = <&gpiochip 10 IRQ_TYPE_EDGE_FALLING>;
-		monitored-battery = <&bat>;
-		ti,system-minimum-microvolt = <3200000>;
-
-		usb_otg_vbus: usb-otg-vbus { };
-	};
-
-	&twl_gpio {
-		otg {
-			gpio-hog;
-			gpios = <6 0>;
-			output-high;
-			line-name = "otg-gpio";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
new file mode 100644
index 000000000000..4884ec90e2b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24190.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI BQ2419x Li-Ion Battery Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq24190
+      - ti,bq24192
+      - ti,bq24192i
+      - ti,bq24196
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  usb-otg-vbus:
+    $ref: /schemas/regulator/regulator.yaml#
+    description: |
+      Regulator that is used to control the VBUS voltage direction for
+      either USB host mode or for charging on the OTG port
+
+  ti,system-minimum-microvolt:
+    description: |
+      when power is connected and the battery is below minimum system voltage,
+      the system will be regulated above this setting.
+
+  omit-battery-class:
+    type: boolean
+    description: |
+      If this property is set, the operating system does not try to create a
+      battery device.
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to a "simple-battery" compatible node.
+
+      This property must be a phandle to a node using the format described
+      in battery.yaml, with the following properties being required:
+      - precharge-current-microamp: maximum charge current during precharge phase
+                                    (typically 20% of battery capacity).
+      - charge-term-current-microamp: a charge cycle terminates when the battery voltage is
+                                      above recharge threshold, and the current is below this
+                                      setting (typically 10% of battery capacity).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bat: battery {
+      compatible = "simple-battery";
+      precharge-current-microamp = <256000>;
+      charge-term-current-microamp = <128000>;
+    };
+
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq24190";
+        reg = <0x6a>;
+        interrupt-parent = <&gpiochip>;
+        interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+        monitored-battery = <&bat>;
+        ti,system-minimum-microvolt = <3200000>;
+
+        usb_otg_vbus: usb-otg-vbus { };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.txt b/Documentation/devicetree/bindings/power/supply/bq24257.txt
deleted file mode 100644
index f8f5a1685bb9..000000000000
--- a/Documentation/devicetree/bindings/power/supply/bq24257.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Binding for TI bq24250/bq24251/bq24257 Li-Ion Charger
-
-Required properties:
-- compatible: Should contain one of the following:
- * "ti,bq24250"
- * "ti,bq24251"
- * "ti,bq24257"
-- reg: integer, i2c address of the device.
-- interrupts: Interrupt mapping for GPIO IRQ (configure for both edges). Use in
-    conjunction with "interrupt-parent".
-- ti,battery-regulation-voltage: integer, maximum charging voltage in uV.
-- ti,charge-current: integer, maximum charging current in uA.
-- ti,termination-current: integer, charge will be terminated when current in
-    constant-voltage phase drops below this value (in uA).
-
-Optional properties:
-- pg-gpios: GPIO used for connecting the bq2425x device PG (Power Good) pin.
-    This pin is not available on all devices however it should be used if
-    possible as this is the recommended way to obtain the charger's input PG
-    state. If this pin is not specified a software-based approach for PG
-    detection is used.
-- ti,current-limit: The maximum current to be drawn from the charger's input
-    (in uA). If this property is not specified, the input limit current is
-    set automatically using USB D+/D- signal based charger type detection.
-    If the hardware does not support the D+/D- based detection, a default
-    of 500,000 is used (=500mA) instead.
-- ti,ovp-voltage: Configures the over voltage protection voltage (in uV). If
-    not specified a default of 6,5000,000 (=6.5V) is used.
-- ti,in-dpm-voltage: Configures the threshold input voltage for the dynamic
-    power path management (in uV). If not specified a default of 4,360,000
-    (=4.36V) is used.
-
-Example:
-
-bq24257 {
-	compatible = "ti,bq24257";
-	reg = <0x6a>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
-
-	pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-
-	ti,battery-regulation-voltage = <4200000>;
-	ti,charge-current = <1000000>;
-	ti,termination-current = <50000>;
-};
-
-Example:
-
-bq24250 {
-	compatible = "ti,bq24250";
-	reg = <0x6a>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
-
-	ti,battery-regulation-voltage = <4200000>;
-	ti,charge-current = <500000>;
-	ti,termination-current = <50000>;
-	ti,current-limit = <900000>;
-	ti,ovp-voltage = <9500000>;
-	ti,in-dpm-voltage = <4440000>;
-};
diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.yaml b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
new file mode 100644
index 000000000000..c7406bef0fa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24257.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for bq24250, bq24251 and bq24257 Li-Ion Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq24250
+      - ti,bq24251
+      - ti,bq24257
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging voltage in uV
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging current in uA
+
+  ti,termination-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      charge will be terminated when current in constant-voltage phase
+      drops below this value (in uA)
+
+  pg-gpios:
+    description: |
+      GPIO used for connecting the bq2425x device PG (Power Good) pin.
+      This pin is not available on all devices however it should be used if
+      possible as this is the recommended way to obtain the charger's input PG
+      state. If this pin is not specified a software-based approach for PG
+      detection is used.
+    maxItems: 1
+
+  ti,current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The maximum current to be drawn from the charger's input (in uA).
+      If this property is not specified, the input limit current is set
+      automatically using USB D+/D- signal based charger type detection.
+      If the hardware does not support the D+/D- based detection, a default
+      of 500,000 is used (=500mA) instead.
+
+  ti,ovp-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configures the over voltage protection voltage (in uV).
+      If not specified a default of 6,5000,000 (=6.5V) is used.
+
+  ti,in-dpm-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configures the threshold input voltage for the dynamic power path management (in uV).
+      If not specified a default of 4,360,000 (=4.36V) is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ti,battery-regulation-voltage
+  - ti,charge-current
+  - ti,termination-current
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq24257";
+        reg = <0x6a>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+        pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <1000000>;
+        ti,termination-current = <50000>;
+      };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq24250";
+        reg = <0x6a>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <500000>;
+        ti,termination-current = <50000>;
+        ti,current-limit = <900000>;
+        ti,ovp-voltage = <9500000>;
+        ti,in-dpm-voltage = <4440000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
new file mode 100644
index 000000000000..dd9176ce71b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24735.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI BQ24735 Li-Ion Battery Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,bq24735
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: AC adapter plug event interrupt
+    maxItems: 1
+
+  ti,ac-detect-gpios:
+    maxItems: 1
+    description: |
+      This GPIO is optionally used to read the AC adapter status. This is a Host GPIO
+      that is configured as an input and connected to the ACOK pin on the bq24735.
+      Note: for backwards compatibility reasons, the GPIO must be active on AC adapter
+      absence despite ACOK being active (high) on AC adapter presence.
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Used to control and set the charging current.
+      This value must be between 128mA and 8.128A with a 64mA step resolution.
+      The POR value is 0x0000h. This number is in mA (e.g. 8192).
+      See spec for more information about the ChargeCurrent (0x14h) register.
+
+  ti,charge-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Used to control and set the charging voltage.
+      This value must be between 1.024V and 19.2V with a 16mV step resolution.
+      The POR value is 0x0000h. This number is in mV (e.g. 19200).
+      See spec for more information about the ChargeVoltage (0x15h) register.
+
+  ti,input-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Used to control and set the charger input current.
+      This value must be between 128mA and 8.064A with a 128mA step resolution.
+      The POR value is 0x1000h. This number is in mA (e.g. 8064).
+      See the spec for more information about the InputCurrent (0x3fh) register.
+
+  ti,external-control:
+    type: boolean
+    description: |
+      Indicates that the charger is configured externally and that the host should not
+      attempt to enable/disable charging or set the charge voltage/current.
+
+  poll-interval:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      If 'interrupts' is not specified, poll AC adapter presence with this interval (milliseconds).
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@9 {
+        compatible = "ti,bq24735";
+        reg = <0x9>;
+        ti,ac-detect-gpios = <&gpio 72 0x1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
new file mode 100644
index 000000000000..1a1b240034ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq2515x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI bq2515x 500-mA Linear charger family
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The BQ2515x family is a highly integrated battery charge management IC that
+  integrates the most common functions for wearable devices, namely a charger,
+  an output voltage rail, ADC for battery and system monitoring, and
+  push-button controller.
+
+  Specifications about the charger can be found at:
+    http://www.ti.com/lit/ds/symlink/bq25150.pdf
+    http://www.ti.com/lit/ds/symlink/bq25155.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25150
+      - ti,bq25155
+
+  reg:
+    maxItems: 1
+    description: I2C address of the charger.
+
+  ac-detect-gpios:
+    description: |
+       GPIO used for connecting the bq2515x device PG (AC Detect)
+       pin.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO used for hardware reset.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO used for low power mode of IC.
+    maxItems: 1
+
+  charge-enable-gpios:
+    description: GPIO used to turn on and off charging.
+    maxItems: 1
+
+  input-current-limit-microamp:
+    description: Maximum input current in micro Amps.
+    minimum: 50000
+    maximum: 500000
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the battery node being monitored
+
+required:
+  - compatible
+  - reg
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <50000>;
+      precharge-current-microamp = <2500>;
+      constant-charge-voltage-max-microvolt = <4000000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bq25150: charger@6b {
+        compatible = "ti,bq25150";
+        reg = <0x6b>;
+        monitored-battery = <&bat>;
+        input-current-limit-microamp = <100000>;
+
+        ac-detect-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+        powerdown-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+        charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
new file mode 100644
index 000000000000..82f382a7ffb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq256xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI bq256xx Switch Mode Buck Charger
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The bq256xx devices are a family of highly-integrated battery charge
+  management and system power management ICs for single cell Li-ion and Li-
+  polymer batteries.
+
+  Datasheets:
+    - https://www.ti.com/lit/ds/symlink/bq25600.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25601.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25600d.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25601d.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25611d.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25618.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25619.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25600
+      - ti,bq25601
+      - ti,bq25600d
+      - ti,bq25601d
+      - ti,bq25611d
+      - ti,bq25618
+      - ti,bq25619
+
+  reg:
+    maxItems: 1
+
+  ti,watchdog-timeout-ms:
+    default: 0
+    description: |
+      Watchdog timer in ms. 0 (default) disables the watchdog
+    minimum: 0
+    maximum: 160000
+    enum: [ 0, 40000, 80000, 160000]
+
+  input-voltage-limit-microvolt:
+    description: |
+       Minimum input voltage limit in µV with a 100000 µV step
+    minimum: 3900000
+    maximum: 5400000
+
+  input-current-limit-microamp:
+    description: |
+       Maximum input current limit in µA with a 100000 µA step
+    minimum: 100000
+    maximum: 3200000
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the battery node being monitored
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Interrupt sends an active low, 256 μs pulse to host to report the charger
+      device status and faults.
+
+required:
+  - compatible
+  - reg
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <2040000>;
+      constant-charge-voltage-max-microvolt = <4352000>;
+      precharge-current-microamp = <180000>;
+      charge-term-current-microamp = <180000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+
+      clock-frequency = <400000>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6b {
+        compatible = "ti,bq25601";
+        reg = <0x6b>;
+        monitored-battery = <&bat>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+        ti,watchdog-timeout-ms = <40000>;
+
+        input-voltage-limit-microvolt = <4500000>;
+        input-current-limit-microamp = <2400000>;
+       };
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt
deleted file mode 100644
index dc9c8f76e06c..000000000000
--- a/Documentation/devicetree/bindings/power/supply/bq25890.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-Binding for TI bq25890 Li-Ion Charger
-
-This driver will support the bq25892, the bq25896 and the bq25890. There are
-other ICs in the same family but those have not been tested.
-
-Required properties:
-- compatible: Should contain one of the following:
-    * "ti,bq25890"
-    * "ti,bq25892"
-    * "ti,bq25895"
-    * "ti,bq25896"
-- reg: integer, i2c address of the device.
-- ti,battery-regulation-voltage: integer, maximum charging voltage (in uV);
-- ti,charge-current: integer, maximum charging current (in uA);
-- ti,termination-current: integer, charge will be terminated when current in
-    constant-voltage phase drops below this value (in uA);
-- ti,precharge-current: integer, maximum charge current during precharge
-    phase (in uA);
-- ti,minimum-sys-voltage: integer, when battery is charging and it is below
-    minimum system voltage, the system will be regulated above
-    minimum-sys-voltage setting (in uV);
-- ti,boost-voltage: integer, VBUS voltage level in boost mode (in uV);
-- ti,boost-max-current: integer, maximum allowed current draw in boost mode
-    (in uA).
-
-Optional properties:
-- ti,boost-low-freq: boolean, if present boost mode frequency will be 500kHz,
-    otherwise 1.5MHz;
-- ti,use-ilim-pin: boolean, if present the ILIM resistor will be used and the
-    input current will be the lower between the resistor setting and the IINLIM
-    register setting;
-- ti,thermal-regulation-threshold: integer, temperature above which the charge
-    current is lowered, to avoid overheating (in degrees Celsius). If omitted,
-    the default setting will be used (120 degrees);
-
-Example:
-
-bq25890 {
-        compatible = "ti,bq25890";
-        reg = <0x6a>;
-
-        ti,battery-regulation-voltage = <4200000>;
-        ti,charge-current = <1000000>;
-        ti,termination-current = <50000>;
-        ti,precharge-current = <128000>;
-        ti,minimum-sys-voltage = <3600000>;
-        ti,boost-voltage = <5000000>;
-        ti,boost-max-current = <1000000>;
-
-        ti,use-ilim-pin;
-        ti,thermal-regulation-threshold = <120>;
-};
diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.yaml b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
new file mode 100644
index 000000000000..204c0147188f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq25890.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for bq25890, bq25892, bq25895 and bq25896 Li-Ion Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25890
+      - ti,bq25892
+      - ti,bq25895
+      - ti,bq25896
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging voltage (in uV)
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging current (in uA)
+
+  ti,termination-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      charge will be terminated when current in constant-voltage phase
+      drops below this value (in uA)
+
+  ti,precharge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charge current during precharge phase (in uA)
+
+  ti,minimum-sys-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      when battery is charging and it is below minimum system voltage,
+      the system will be regulated above minimum-sys-voltage setting (in uV)
+
+  ti,boost-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: VBUS voltage level in boost mode (in uV)
+
+  ti,boost-max-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum allowed current draw in boost mode (in uA)
+
+  ti,boost-low-freq:
+    description: boost mode frequency will be 500kHz, otherwise 1.5MHz
+    type: boolean
+
+  ti,use-ilim-pin:
+    description: |
+      ILIM resistor will be used and the input current will be the lower
+      between the resistor setting and the IINLIM register setting
+    type: boolean
+
+  ti,thermal-regulation-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      temperature above which the charge current is lowered, to avoid overheating
+      (in degrees Celsius). If omitted, the default setting will be used (120 degrees)
+
+  ti,ibatcomp-micro-ohms:
+    description: value of a resistor in series with the battery (in Micro Ohms)
+
+  ti,ibatcomp-clamp-microvolt:
+    description: max. charging voltage adjustment due to expected voltage drop on in-series resistor
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ti,battery-regulation-voltage
+  - ti,charge-current
+  - ti,termination-current
+  - ti,precharge-current
+  - ti,minimum-sys-voltage
+  - ti,boost-voltage
+  - ti,boost-max-current
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq25890";
+        reg = <0x6a>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <1000000>;
+        ti,termination-current = <50000>;
+        ti,precharge-current = <128000>;
+        ti,minimum-sys-voltage = <3600000>;
+        ti,boost-voltage = <5000000>;
+        ti,boost-max-current = <1000000>;
+
+        ti,use-ilim-pin;
+        ti,thermal-regulation-threshold = <120>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
new file mode 100644
index 000000000000..b687b8bcd705
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq25980.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ25980 Flash Charger
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The BQ25980, BQ25975, and BQ25960 are a series of flash chargers intended
+  for use in high-power density portable electronics. These inductorless
+  switching chargers can provide over 97% efficiency by making use of the
+  switched capacitor architecture.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25980
+      - ti,bq25975
+      - ti,bq25960
+
+  reg:
+    maxItems: 1
+
+  ti,watchdog-timeout-ms:
+    description: |
+      Watchdog timer in milli seconds. 0 disables the watchdog.
+    default: 0
+    minimum: 0
+    maximum: 300000
+    enum: [ 0, 5000, 10000, 50000, 300000]
+
+  ti,sc-ovp-limit-microvolt:
+    description: |
+      Minimum input voltage limit in micro volts with a when the charger is in
+      switch cap mode. 100000 micro volt step.
+    default: 17800000
+    minimum: 14000000
+    maximum: 22000000
+
+  ti,sc-ocp-limit-microamp:
+    description: |
+      Maximum input current limit in micro amps with a 100000 micro amp step.
+    minimum: 100000
+    maximum: 3300000
+
+  ti,bypass-ovp-limit-microvolt:
+    description: |
+      Minimum input voltage limit in micro volts with a when the charger is in
+      switch cap mode. 50000 micro volt step.
+    minimum: 7000000
+    maximum: 12750000
+
+  ti,bypass-ocp-limit-microamp:
+    description: |
+      Maximum input current limit in micro amps with a 100000 micro amp step.
+    minimum: 100000
+    maximum: 3300000
+
+  ti,bypass-enable:
+    type: boolean
+    description: Enables bypass mode at boot time
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Indicates that the device state has changed.
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the battery node being monitored
+
+required:
+  - compatible
+  - reg
+  - monitored-battery
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <4000000>;
+      constant-charge-voltage-max-microvolt = <8400000>;
+      precharge-current-microamp = <160000>;
+      charge-term-current-microamp = <160000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bq25980: charger@65 {
+          compatible = "ti,bq25980";
+          reg = <0x65>;
+          interrupt-parent = <&gpio1>;
+          interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+          ti,watchdog-timeout-ms = <0>;
+          ti,sc-ocp-limit-microamp = <2000000>;
+          ti,sc-ovp-limit-microvolt = <17800000>;
+          monitored-battery = <&bat>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
deleted file mode 100644
index 4fa8e08df2b6..000000000000
--- a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-TI BQ27XXX fuel gauge family
-
-Required properties:
-- compatible: contains one of the following:
- * "ti,bq27200" - BQ27200
- * "ti,bq27210" - BQ27210
- * "ti,bq27500" - deprecated, use revision specific property below
- * "ti,bq27510" - deprecated, use revision specific property below
- * "ti,bq27520" - deprecated, use revision specific property below
- * "ti,bq27500-1" - BQ27500/1
- * "ti,bq27510g1" - BQ27510-g1
- * "ti,bq27510g2" - BQ27510-g2
- * "ti,bq27510g3" - BQ27510-g3
- * "ti,bq27520g1" - BQ27520-g1
- * "ti,bq27520g2" - BQ27520-g2
- * "ti,bq27520g3" - BQ27520-g3
- * "ti,bq27520g4" - BQ27520-g4
- * "ti,bq27521" - BQ27521
- * "ti,bq27530" - BQ27530
- * "ti,bq27531" - BQ27531
- * "ti,bq27541" - BQ27541
- * "ti,bq27542" - BQ27542
- * "ti,bq27546" - BQ27546
- * "ti,bq27742" - BQ27742
- * "ti,bq27545" - BQ27545
- * "ti,bq27411" - BQ27411
- * "ti,bq27421" - BQ27421
- * "ti,bq27425" - BQ27425
- * "ti,bq27426" - BQ27426
- * "ti,bq27441" - BQ27441
- * "ti,bq27621" - BQ27621
-- reg: integer, I2C address of the fuel gauge.
-
-Optional properties:
-- monitored-battery: phandle of battery characteristics node
-    The fuel gauge uses the following battery properties:
-    + energy-full-design-microwatt-hours
-    + charge-full-design-microamp-hours
-    + voltage-min-design-microvolt
-  Both or neither of the *-full-design-*-hours properties must be set.
-  See Documentation/devicetree/bindings/power/supply/battery.txt
-
-Example:
-
-	bat: battery {
-		compatible = "simple-battery";
-		voltage-min-design-microvolt = <3200000>;
-		energy-full-design-microwatt-hours = <5290000>;
-		charge-full-design-microamp-hours = <1430000>;
-	};
-
-	bq27510g3: fuel-gauge@55 {
-		compatible = "ti,bq27510g3";
-		reg = <0x55>;
-		monitored-battery = <&bat>;
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
new file mode 100644
index 000000000000..65fc6049efc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq27xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ27XXX fuel gauge family
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+  - Andrew F. Davis <afd@ti.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Support various Texas Instruments fuel gauge devices that share similar
+  register maps and power supply properties
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq27200
+      - ti,bq27210
+      - ti,bq27500 # deprecated, use revision specific property below
+      - ti,bq27510 # deprecated, use revision specific property below
+      - ti,bq27520 # deprecated, use revision specific property below
+      - ti,bq27500-1
+      - ti,bq27510g1
+      - ti,bq27510g2
+      - ti,bq27510g3
+      - ti,bq27520g1
+      - ti,bq27520g2
+      - ti,bq27520g3
+      - ti,bq27520g4
+      - ti,bq27521
+      - ti,bq27530
+      - ti,bq27531
+      - ti,bq27541
+      - ti,bq27542
+      - ti,bq27546
+      - ti,bq27742
+      - ti,bq27545
+      - ti,bq27411
+      - ti,bq27421
+      - ti,bq27425
+      - ti,bq27426
+      - ti,bq27441
+      - ti,bq27621
+      - ti,bq27z561
+      - ti,bq28z610
+      - ti,bq34z100
+      - ti,bq78z100
+
+  reg:
+    maxItems: 1
+    description: integer, I2C address of the fuel gauge.
+
+  monitored-battery:
+    description: |
+       phandle of battery characteristics node.
+       The fuel gauge uses the following battery properties:
+       - energy-full-design-microwatt-hours
+       - charge-full-design-microamp-hours
+       - voltage-min-design-microvolt
+       Both or neither of the *-full-design-*-hours properties must be set.
+       See Documentation/devicetree/bindings/power/supply/battery.yaml
+
+  power-supplies: true
+
+required:
+  - compatible
+  - reg
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      bat: battery {
+        compatible = "simple-battery";
+        voltage-min-design-microvolt = <3200000>;
+        energy-full-design-microwatt-hours = <5290000>;
+        charge-full-design-microamp-hours = <1430000>;
+      };
+
+      bq27510g3: fuel-gauge@55 {
+        compatible = "ti,bq27510g3";
+        reg = <0x55>;
+        monitored-battery = <&bat>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.txt b/Documentation/devicetree/bindings/power/supply/charger-manager.txt
deleted file mode 100644
index ec4fe9de3137..000000000000
--- a/Documentation/devicetree/bindings/power/supply/charger-manager.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-charger-manager bindings
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Required properties :
- - compatible : "charger-manager"
- - <>-supply : for regulator consumer
- - cm-num-chargers : number of chargers
- - cm-chargers : name of chargers
- - cm-fuel-gauge : name of battery fuel gauge
- - subnode <regulator> :
-	- cm-regulator-name : name of charger regulator
-	- subnode <cable> :
-		- cm-cable-name : name of charger cable
-		- cm-cable-extcon : name of extcon dev
-(optional)	- cm-cable-min : minimum current of cable
-(optional)	- cm-cable-max : maximum current of cable
-
-Optional properties :
- - cm-name : charger manager's name (default : "battery")
- - cm-poll-mode : polling mode (enum polling_modes)
- - cm-poll-interval : polling interval
- - cm-battery-stat : battery status (enum data_source)
- - cm-fullbatt-* : data for full battery checking
- - cm-thermal-zone : name of external thermometer's thermal zone
- - cm-battery-* : threshold battery temperature for charging
-	-cold : critical cold temperature of battery for charging
-	-cold-in-minus : flag that cold temperature is in minus degrees
-	-hot : critical hot temperature of battery for charging
-	-temp-diff : temperature difference to allow recharging
- - cm-dis/charging-max = limits of charging duration
-
-Example :
-	charger-manager@0 {
-		compatible = "charger-manager";
-		chg-reg-supply = <&charger_regulator>;
-
-		cm-name = "battery";
-		/* Always polling ON : 30s */
-		cm-poll-mode = <1>;
-		cm-poll-interval = <30000>;
-
-		cm-fullbatt-vchkdrop-ms = <30000>;
-		cm-fullbatt-vchkdrop-volt = <150000>;
-		cm-fullbatt-soc = <100>;
-
-		cm-battery-stat = <3>;
-
-		cm-num-chargers = <3>;
-		cm-chargers = "charger0", "charger1", "charger2";
-
-		cm-fuel-gauge = "fuelgauge0";
-
-		cm-thermal-zone = "thermal_zone.1"
-		/* in deci centigrade */
-		cm-battery-cold = <50>;
-		cm-battery-cold-in-minus;
-		cm-battery-hot = <800>;
-		cm-battery-temp-diff = <100>;
-
-		/* Allow charging for 5hr */
-		cm-charging-max = <18000000>;
-		/* Allow discharging for 2hr */
-		cm-discharging-max = <7200000>;
-
-		regulator@0 {
-			cm-regulator-name = "chg-reg";
-			cable@0 {
-				cm-cable-name = "USB";
-				cm-cable-extcon = "extcon-dev.0";
-				cm-cable-min = <475000>;
-				cm-cable-max = <500000>;
-			};
-			cable@1 {
-				cm-cable-name = "TA";
-				cm-cable-extcon = "extcon-dev.0";
-				cm-cable-min = <650000>;
-				cm-cable-max = <675000>;
-			};
-		};
-
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
new file mode 100644
index 000000000000..5af1e0beaf29
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/charger-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Charger Manager
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Binding for the legacy charger manager driver.
+  Please do not use for new products.
+
+properties:
+  compatible:
+    const: charger-manager
+
+  cm-chargers:
+    description: name of chargers
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  cm-num-chargers:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+
+  cm-fuel-gauge:
+    description: name of battery fuel gauge
+    $ref: /schemas/types.yaml#/definitions/string
+
+  cm-name:
+    description: name of the charger manager
+    default: battery
+    $ref: /schemas/types.yaml#/definitions/string
+
+  cm-poll-mode:
+    description: polling mode
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    enum:
+      - 0 # disabled
+      - 1 # always
+      - 2 # when external power is connected
+      - 3 # when charging
+
+  cm-poll-interval:
+    description: polling interval (in ms)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-stat:
+    description: battery status
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # battery always present
+      - 1 # no battery
+      - 2 # check presence via fuel gauge
+      - 3 # check presence via charger
+
+  cm-fullbatt-vchkdrop-volt:
+    description: voltage drop before restarting charging in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-fullbatt-vchkdrop-ms:
+    deprecated: true
+
+  cm-fullbatt-voltage:
+    description: voltage of full battery in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-fullbatt-soc:
+    description: state of charge to consider as full battery in %
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-fullbatt-capacity:
+    description: capcity to consider as full battery in uAh
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-thermal-zone:
+    description: name of external thermometer's thermal zone
+    $ref: /schemas/types.yaml#/definitions/string
+
+  cm-discharging-max:
+    description: limits of discharging duration in ms
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-charging-max:
+    description: limits of charging duration in ms
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-cold:
+    description: critical cold temperature of battery for charging in deci-degree celsius
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-cold-in-minus:
+    description: if set cm-battery-cold temperature is in minus degrees
+    type: boolean
+
+  cm-battery-hot:
+    description: critical hot temperature of battery for charging in deci-degree celsius
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-temp-diff:
+    description: temperature difference to allow recharging in deci-degree celsius
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  "-supply$":
+    description: regulator consumer, named according to cm-regulator-name
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  "^regulator[@-][0-9]$":
+    type: object
+    properties:
+      cm-regulator-name:
+        description: name of charger regulator
+        $ref: /schemas/types.yaml#/definitions/string
+
+    required:
+      - cm-regulator-name
+
+    additionalProperties: false
+
+    patternProperties:
+      "^cable[@-][0-9]$":
+        type: object
+        properties:
+          cm-cable-name:
+            description: name of charger cable
+            enum:
+              - USB
+              - USB-HOST
+              - SDP
+              - DCP
+              - CDP
+              - ACA
+              - FAST-CHARGER
+              - SLOW-CHARGER
+              - WPT
+              - PD
+              - DOCK
+              - JIG
+              - MECHANICAL
+
+          cm-cable-extcon:
+            description: name of extcon dev
+            $ref: /schemas/types.yaml#/definitions/string
+
+          cm-cable-min:
+            description: minimum current of cable in uA
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          cm-cable-max:
+            description: maximum current of cable in uA
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - cm-cable-name
+          - cm-cable-extcon
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - cm-chargers
+  - cm-fuel-gauge
+
+additionalProperties: false
+
+examples:
+  - |
+    charger-manager {
+        compatible = "charger-manager";
+        chg-reg-supply = <&charger_regulator>;
+
+        cm-name = "battery";
+        /* Always polling ON : 30s */
+        cm-poll-mode = <1>;
+        cm-poll-interval = <30000>;
+
+        cm-fullbatt-vchkdrop-volt = <150000>;
+        cm-fullbatt-soc = <100>;
+
+        cm-battery-stat = <3>;
+
+        cm-chargers = "charger0", "charger1", "charger2";
+
+        cm-fuel-gauge = "fuelgauge0";
+
+        cm-thermal-zone = "thermal_zone.1";
+        /* in deci centigrade */
+        cm-battery-cold = <50>;
+        cm-battery-cold-in-minus;
+        cm-battery-hot = <800>;
+        cm-battery-temp-diff = <100>;
+
+        /* Allow charging for 5hr */
+        cm-charging-max = <18000000>;
+        /* Allow discharging for 2hr */
+        cm-discharging-max = <7200000>;
+
+        regulator-0 {
+            cm-regulator-name = "chg-reg";
+            cable-0 {
+                cm-cable-name = "USB";
+                cm-cable-extcon = "extcon-dev.0";
+                cm-cable-min = <475000>;
+                cm-cable-max = <500000>;
+            };
+            cable-1 {
+                cm-cable-name = "SDP";
+                cm-cable-extcon = "extcon-dev.0";
+                cm-cable-min = <650000>;
+                cm-cable-max = <675000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-battery.txt b/Documentation/devicetree/bindings/power/supply/cpcap-battery.txt
deleted file mode 100644
index a04efa22da01..000000000000
--- a/Documentation/devicetree/bindings/power/supply/cpcap-battery.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Motorola CPCAP PMIC battery driver binding
-
-Required properties:
-- compatible: Shall be "motorola,cpcap-battery"
-- interrupts: Interrupt specifier for each name in interrupt-names
-- interrupt-names: Should contain the following entries:
-		   "lowbph", "lowbpl", "chrgcurr1", "battdetb"
-- io-channels: IIO ADC channel specifier for each name in io-channel-names
-- io-channel-names: Should contain the following entries:
-		    "battdetb", "battp", "chg_isense", "batti"
-- power-supplies: List of phandles for power-supplying devices, as
-		  described in power_supply.txt. Typically a reference
-		  to cpcap_charger.
-
-Example:
-
-cpcap_battery: battery {
-	compatible = "motorola,cpcap-battery";
-	interrupts-extended = <
-		&cpcap 5 0 &cpcap 3 0
-		&cpcap 20 0 &cpcap 54 0
-	>;
-	interrupt-names =
-		"lowbph", "lowbpl",
-		"chrgcurr1", "battdetb";
-	io-channels = <&cpcap_adc 0 &cpcap_adc 1
-		       &cpcap_adc 5 &cpcap_adc 6>;
-	io-channel-names = "battdetb", "battp",
-			   "chg_isense", "batti";
-	power-supplies = <&cpcap_charger>;
-};
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
new file mode 100644
index 000000000000..694bfdb5815c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cpcap-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC battery
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Motorola CPCAP is a PMIC found in some mobile phones, e.g.
+  the Droid 4. This binding describes its battery fuel gauge
+  sub-function.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: motorola,cpcap-battery
+
+  interrupts:
+    items:
+      - description: eol interrupt
+      - description: low battery percentage interrupt
+      - description: critical battery percentage interrupt
+      - description: charger detect interrupt
+      - description: battery detect interrupt
+      - description: coulomb counter calibration interrupt
+
+  interrupt-names:
+    items:
+      - const: eol
+      - const: lowbph
+      - const: lowbpl
+      - const: chrgcurr1
+      - const: battdetb
+      - const: cccal
+
+  io-channels:
+    items:
+      - description: battery temperature
+      - description: battery voltage
+      - description: battery charge current
+      - description: battery current
+
+  io-channel-names:
+    items:
+      - const: battdetb
+      - const: battp
+      - const: chg_isense
+      - const: batti
+
+  power-supplies: true
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+  - power-supplies
+
+additionalProperties: false
+
+examples:
+  - |
+    cpcap {
+      battery {
+        compatible = "motorola,cpcap-battery";
+        interrupts-extended =
+                <&cpcap 6 0>, <&cpcap 5 0>, <&cpcap 3 0>,
+                <&cpcap 20 0>, <&cpcap 54 0>, <&cpcap 57 0>;
+        interrupt-names =
+                "eol", "lowbph", "lowbpl",
+                "chrgcurr1", "battdetb", "cccal";
+        io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+                      <&cpcap_adc 5>, <&cpcap_adc 6>;
+        io-channel-names = "battdetb", "battp",
+                           "chg_isense", "batti";
+        power-supplies = <&cpcap_charger>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
deleted file mode 100644
index 6048f636783f..000000000000
--- a/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Motorola CPCAP PMIC battery charger binding
-
-Required properties:
-- compatible: Shall be "motorola,mapphone-cpcap-charger"
-- interrupts: Interrupt specifier for each name in interrupt-names
-- interrupt-names: Should contain the following entries:
-		   "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
-		   "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
-		   "battdetb"
-- io-channels: IIO ADC channel specifier for each name in io-channel-names
-- io-channel-names: Should contain the following entries:
-		    "battdetb", "battp", "vbus", "chg_isense", "batti"
-
-Optional properties:
-- mode-gpios: Optionally CPCAP charger can have a companion wireless
-	      charge controller that is controlled with two GPIOs
-	      that are active low.
-
-Example:
-
-cpcap_charger: charger {
-	compatible = "motorola,mapphone-cpcap-charger";
-	interrupts-extended = <
-		&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
-		&cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0
-		&cpcap 54 0
-	>;
-	interrupt-names =
-		"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
-		"rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
-		"battdetb";
-	mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
-		      &gpio3 23 GPIO_ACTIVE_LOW>;
-	io-channels = <&cpcap_adc 0 &cpcap_adc 1
-		       &cpcap_adc 2 &cpcap_adc 5
-		       &cpcap_adc 6>;
-	io-channel-names = "battdetb", "battp",
-			   "vbus", "chg_isense",
-			   "batti";
-};
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
new file mode 100644
index 000000000000..7e6bf30a0107
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cpcap-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC charger
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Motorola CPCAP is a PMIC found in some mobile phones, e.g.
+  the Droid 4. This binding describes its battery charger
+  sub-function.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: motorola,mapphone-cpcap-charger
+
+  interrupts:
+    items:
+      - description: charger detection interrupt
+      - description: reverse charge interrupt
+      - description: SE1 charger detection interrupt
+      - description: SE0 charger detection interrupt
+      - description: reverse mode interrupt
+      - description: charge current 2 interrupt
+      - description: charge current 1 interrupt
+      - description: VBUS valid interrupt
+      - description: battery detect interrupt
+
+  interrupt-names:
+    items:
+      - const: chrg_det
+      - const: rvrs_chrg
+      - const: chrg_se1b
+      - const: se0conn
+      - const: rvrs_mode
+      - const: chrgcurr2
+      - const: chrgcurr1
+      - const: vbusvld
+      - const: battdetb
+
+  io-channels:
+    items:
+      - description: battery temperature
+      - description: battery voltage
+      - description: VBUS voltage
+      - description: battery charge current
+      - description: battery current
+
+  io-channel-names:
+    items:
+      - const: battdetb
+      - const: battp
+      - const: vbus
+      - const: chg_isense
+      - const: batti
+
+  mode-gpios:
+    description: |
+      Optionally CPCAP charger can have a companion wireless
+      charge controller that is controlled with two GPIOs
+      that are active low.
+    minItems: 2
+    maxItems: 2
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    cpcap {
+      charger {
+        compatible = "motorola,mapphone-cpcap-charger";
+        interrupts-extended =
+                <&cpcap 13 0>, <&cpcap 12 0>, <&cpcap 29 0>, <&cpcap 28 0>,
+                <&cpcap 22 0>, <&cpcap 21 0>, <&cpcap 20 0>, <&cpcap 19 0>,
+                <&cpcap 54 0>;
+        interrupt-names =
+                "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+                "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
+                "battdetb";
+        mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>,
+                     <&gpio3 23 GPIO_ACTIVE_LOW>;
+        io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+                      <&cpcap_adc 2>, <&cpcap_adc 5>,
+                      <&cpcap_adc 6>;
+        io-channel-names = "battdetb", "battp",
+                           "vbus", "chg_isense",
+                           "batti";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
new file mode 100644
index 000000000000..dc697b6147b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cw2015_battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery driver for CW2015 shuntless fuel gauge by CellWise.
+
+maintainers:
+  - Tobias Schramm <t.schramm@manjaro.org>
+
+description: |
+  The driver can utilize information from a simple-battery linked via a
+  phandle in monitored-battery. If specified the driver uses the
+  charge-full-design-microamp-hours property of the battery.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: cellwise,cw2015
+
+  reg:
+    maxItems: 1
+
+  cellwise,battery-profile:
+    description: |
+      This property specifies characteristics of the battery used. The format
+      of this binary blob is kept secret by CellWise. The only way to obtain
+      it is to mail two batteries to a test facility of CellWise and receive
+      back a test report with the binary blob.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 64
+    maxItems: 64
+
+  cellwise,monitor-interval-ms:
+    description:
+      Specifies the interval in milliseconds gauge values are polled at
+    minimum: 250
+
+  power-supplies:
+    minItems: 1
+    maxItems: 8 # Should be enough
+
+  monitored-battery:
+    description:
+      Specifies the phandle of a simple-battery connected to this gauge
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cw2015@62 {
+            compatible = "cellwise,cw2015";
+            reg = <0x62>;
+            cellwise,battery-profile = /bits/ 8 <
+                0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+                0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+                0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+                0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+                0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+                0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+                0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+                0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+           >;
+           cellwise,monitor-interval-ms = <5000>;
+           monitored-battery = <&bat>;
+           power-supplies = <&mains_charger>, <&usb_charger>;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/da9150-charger.txt b/Documentation/devicetree/bindings/power/supply/da9150-charger.txt
deleted file mode 100644
index f3906663c454..000000000000
--- a/Documentation/devicetree/bindings/power/supply/da9150-charger.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Dialog Semiconductor DA9150 Charger Power Supply bindings
-
-Required properties:
-- compatible: "dlg,da9150-charger" for DA9150 Charger Power Supply
-
-Optional properties:
-- io-channels: List of phandle and IIO specifier pairs
-- io-channel-names: List of channel names used by charger
-      ["CHAN_IBUS", "CHAN_VBUS", "CHAN_TJUNC", "CHAN_VBAT"]
-  (See Documentation/devicetree/bindings/iio/iio-bindings.txt for further info)
-
-
-Example:
-
-	da9150-charger {
-		compatible = "dlg,da9150-charger";
-
-		io-channels = <&gpadc 0>,
-			      <&gpadc 2>,
-			      <&gpadc 8>,
-			      <&gpadc 5>;
-		io-channel-names = "CHAN_IBUS",
-				   "CHAN_VBUS",
-				   "CHAN_TJUNC",
-				   "CHAN_VBAT";
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/da9150-fg.txt b/Documentation/devicetree/bindings/power/supply/da9150-fg.txt
deleted file mode 100644
index 00236fe3ea31..000000000000
--- a/Documentation/devicetree/bindings/power/supply/da9150-fg.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings
-
-Required properties:
-- compatible: "dlg,da9150-fuel-gauge" for DA9150 Fuel-Gauge Power Supply
-
-Optional properties:
-- dlg,update-interval: Interval time (milliseconds) between battery level checks.
-- dlg,warn-soc-level: Battery discharge level (%) where warning event raised.
-      [1 - 100]
-- dlg,crit-soc-level: Battery discharge level (%) where critical event raised.
-  This value should be lower than the warning level.
-      [1 - 100]
-
-
-Example:
-
-	fuel-gauge {
-		compatible = "dlg,da9150-fuel-gauge";
-
-		dlg,update-interval = <10000>;
-		dlg,warn-soc-level = /bits/ 8 <15>;
-		dlg,crit-soc-level = /bits/ 8 <5>;
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml
new file mode 100644
index 000000000000..b289388952bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/dlg,da9150-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 Charger Power Supply bindings
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: dlg,da9150-charger
+
+  io-channels:
+    items:
+      - description: ADC channel for current
+      - description: ADC channel for bus voltage
+      - description: ADC channel for junction temperature
+      - description: ADC channel for battery voltage
+
+  io-channel-names:
+    items:
+      - const: CHAN_IBUS
+      - const: CHAN_VBUS
+      - const: CHAN_TJUNC
+      - const: CHAN_VBAT
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "dlg,da9150-charger";
+        io-channels = <&gpadc 0>,
+                      <&gpadc 2>,
+                      <&gpadc 8>,
+                      <&gpadc 5>;
+        io-channel-names = "CHAN_IBUS",
+                           "CHAN_VBUS",
+                           "CHAN_TJUNC",
+                           "CHAN_VBAT";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml
new file mode 100644
index 000000000000..d47caf59d204
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/dlg,da9150-fuel-gauge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: dlg,da9150-fuel-gauge
+
+  dlg,update-interval:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Interval time (milliseconds) between battery level checks.
+
+  dlg,warn-soc-level:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 100
+    description: Battery discharge level (%) where warning event raised.
+
+  dlg,crit-soc-level:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 100
+    description: |
+      Battery discharge level (%) where critical event raised.
+      This value should be lower than the warning level.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      battery {
+        compatible = "dlg,da9150-fuel-gauge";
+        dlg,update-interval = <10000>;
+        dlg,warn-soc-level = /bits/ 8 <15>;
+        dlg,crit-soc-level = /bits/ 8 <5>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.txt b/Documentation/devicetree/bindings/power/supply/gpio-charger.txt
deleted file mode 100644
index 0fb33b2c62a6..000000000000
--- a/Documentation/devicetree/bindings/power/supply/gpio-charger.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-gpio-charger
-
-Required properties :
- - compatible : "gpio-charger"
- - gpios : GPIO indicating the charger presence.
-   See GPIO binding in bindings/gpio/gpio.txt .
- - charger-type : power supply type, one of
-     unknown
-     battery
-     ups
-     mains
-     usb-sdp (USB standard downstream port)
-     usb-dcp (USB dedicated charging port)
-     usb-cdp (USB charging downstream port)
-     usb-aca (USB accessory charger adapter)
-
-Optional properties:
- - charge-status-gpios: GPIO indicating whether a battery is charging.
-
-Example:
-
-	usb_charger: charger {
-		compatible = "gpio-charger";
-		charger-type = "usb-sdp";
-		gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
-		charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
-	};
-
-	battery {
-		power-supplies = <&usb_charger>;
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
new file mode 100644
index 000000000000..89f8e2bcb2d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/gpio-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: simple battery chargers only communicating through GPIOs
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description:
+  This binding is for all chargers, which are working more or less
+  autonomously, only providing some status GPIOs and possibly some
+  GPIOs for limited control over the charging process.
+
+properties:
+  compatible:
+    const: gpio-charger
+
+  charger-type:
+    enum:
+      - unknown
+      - battery
+      - ups
+      - mains
+      - usb-sdp                   # USB standard downstream port
+      - usb-dcp                   # USB dedicated charging port
+      - usb-cdp                   # USB charging downstream port
+      - usb-aca                   # USB accessory charger adapter
+    description:
+      Type of the charger, e.g. "mains" for a wall charger.
+
+  gpios:
+    maxItems: 1
+    description: GPIO indicating the charger presence
+
+  charge-status-gpios:
+    maxItems: 1
+    description: GPIO indicating the charging status
+
+  charge-current-limit-gpios:
+    minItems: 1
+    maxItems: 32
+    description: GPIOs used for current limiting
+
+  charge-current-limit-mapping:
+    description: List of tuples with current in uA and a GPIO bitmap (in
+      this order). The tuples must be provided in descending order of the
+      current limit.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description:
+            Current limit in uA
+        - description:
+            Encoded GPIO setting. Bit 0 represents last GPIO from the
+            charge-current-limit-gpios property. Bit 1 second to last
+            GPIO and so on.
+
+required:
+  - compatible
+
+anyOf:
+  - required:
+      - gpios
+  - required:
+      - charge-status-gpios
+  - required:
+      - charge-current-limit-gpios
+
+dependencies:
+  charge-current-limit-gpios: [ charge-current-limit-mapping ]
+  charge-current-limit-mapping: [ charge-current-limit-gpios ]
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    charger {
+      compatible = "gpio-charger";
+      charger-type = "usb-sdp";
+
+      gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
+      charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+
+      charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>,
+                                   <&gpioA 12 GPIO_ACTIVE_HIGH>;
+      charge-current-limit-mapping = <2500000 0x00>, // 2.5 A => both GPIOs low
+                                     <700000 0x01>, // 700 mA => GPIO A.12 high
+                                     <0 0x02>; // 0 mA => GPIO A.11 high
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.txt b/Documentation/devicetree/bindings/power/supply/ingenic,battery.txt
deleted file mode 100644
index 66430bf73815..000000000000
--- a/Documentation/devicetree/bindings/power/supply/ingenic,battery.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Ingenic JZ47xx battery bindings
-
-Required properties:
-
-- compatible: Must be "ingenic,jz4740-battery".
-- io-channels: phandle and IIO specifier pair to the IIO device.
-  Format described in iio-bindings.txt.
-- monitored-battery: phandle to a "simple-battery" compatible node.
-
-The "monitored-battery" property must be a phandle to a node using the format
-described in battery.txt, with the following properties being required:
-
-- voltage-min-design-microvolt: Drained battery voltage.
-- voltage-max-design-microvolt: Fully charged battery voltage.
-
-Example:
-
-#include <dt-bindings/iio/adc/ingenic,adc.h>
-
-simple_battery: battery {
-	compatible = "simple-battery";
-	voltage-min-design-microvolt = <3600000>;
-	voltage-max-design-microvolt = <4200000>;
-};
-
-ingenic_battery {
-	compatible = "ingenic,jz4740-battery";
-	io-channels = <&adc INGENIC_ADC_BATTERY>;
-	io-channel-names = "battery";
-	monitored-battery = <&simple_battery>;
-};
diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
new file mode 100644
index 000000000000..46527038bf22
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx battery bindings
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+properties:
+  compatible:
+    oneOf:
+      - const: ingenic,jz4740-battery
+      - items:
+          - enum:
+              - ingenic,jz4725b-battery
+              - ingenic,jz4770-battery
+          - const: ingenic,jz4740-battery
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: battery
+
+  monitored-battery:
+    description: >
+      phandle to a "simple-battery" compatible node.
+
+      This property must be a phandle to a node using the format described
+      in battery.yaml, with the following properties being required:
+      - voltage-min-design-microvolt: drained battery voltage,
+      - voltage-max-design-microvolt: fully charged battery voltage.
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+    simple_battery: battery {
+            compatible = "simple-battery";
+            voltage-min-design-microvolt = <3600000>;
+            voltage-max-design-microvolt = <4200000>;
+    };
+
+    ingenic-battery {
+            compatible = "ingenic,jz4740-battery";
+            io-channels = <&adc INGENIC_ADC_BATTERY>;
+            io-channel-names = "battery";
+            monitored-battery = <&simple_battery>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/isp1704.txt b/Documentation/devicetree/bindings/power/supply/isp1704.txt
deleted file mode 100644
index fa3596907967..000000000000
--- a/Documentation/devicetree/bindings/power/supply/isp1704.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Binding for NXP ISP1704 USB Charger Detection
-
-Required properties:
-- compatible: Should contain one of the following:
- * "nxp,isp1704"
-- nxp,enable-gpio: Should contain a phandle + gpio-specifier
-  to the GPIO pin connected to the chip's enable pin.
-- usb-phy: Should contain a phandle to the USB PHY
-  the ISP1704 is connected to.
-
-Example:
-
-isp1704 {
-	compatible = "nxp,isp1704";
-	nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
-	usb-phy = <&usb2_phy>;
-};
diff --git a/Documentation/devicetree/bindings/power/supply/isp1704.yaml b/Documentation/devicetree/bindings/power/supply/isp1704.yaml
new file mode 100644
index 000000000000..7e3449ed70d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/isp1704.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/isp1704.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for NXP ISP1704 USB Charger Detection
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: nxp,isp1704
+
+  nxp,enable-gpio:
+    maxItems: 1
+    description: GPIO connected to the chip's enable pin
+
+  usb-phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: USB PHY the ISP1704 is connected to
+
+required:
+  - compatible
+  - nxp,enable-gpio
+  - usb-phy
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    charger-detect {
+      compatible = "nxp,isp1704";
+      nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+      usb-phy = <&usb2_phy>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml
new file mode 100644
index 000000000000..a99d989f1450
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lego,ev3-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEGO MINDSTORMS EV3 Battery
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery.
+  It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is
+  detected by a key switch in the battery compartment.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: lego,ev3-battery
+
+  io-channels:
+    items:
+      - description: ADC channel for battery voltage
+      - description: ADC channel for battery current
+
+  io-channel-names:
+    items:
+      - const: voltage
+      - const: current
+
+  rechargeable-gpios:
+    maxItems: 1
+    description: Rechargeable battery indication gpio
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - rechargeable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    battery {
+      compatible = "lego,ev3-battery";
+      io-channels = <&adc 4>, <&adc 3>;
+      io-channel-names = "voltage", "current";
+      rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt b/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt
deleted file mode 100644
index 5485633b1faa..000000000000
--- a/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-LEGO MINDSTORMS EV3 Battery
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery.
-It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is
-detected by a key switch in the battery compartment.
-
-Required properties:
- - compatible: Must be "lego,ev3-battery"
- - io-channels: phandles to analog inputs for reading voltage and current
- - io-channel-names: Must be "voltage", "current"
- - rechargeable-gpios: phandle to the rechargeable battery indication gpio
-
-Example:
-
-	battery {
-		compatible = "lego,ev3-battery";
-		io-channels = <&adc 4>, <&adc 3>;
-		io-channel-names = "voltage", "current";
-		rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml
new file mode 100644
index 000000000000..76cedf95a12c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lltc,lt3651-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LT3651 Charger Power Supply bindings
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - lltc,lt3651-charger
+      - lltc,ltc3651-charger  # deprecated, use lltc,lt3651-charger
+
+  lltc,acpr-gpios:
+    maxItems: 1
+
+  lltc,fault-gpios:
+    maxItems: 1
+
+  lltc,chrg-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - lltc,acpr-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    charger {
+      compatible = "lltc,lt3651-charger";
+      lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>;
+      lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>;
+      lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
new file mode 100644
index 000000000000..109b41a0d56c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges
+
+description: |
+  All chips measure battery capacity.
+  The LTC2942 is pin compatible with the LTC2941, it adds voltage and
+  temperature monitoring, and is runtime detected. LTC2943 and LTC2944
+  are software compatible, uses a slightly different conversion formula
+  for the charge counter and adds voltage, current and temperature monitoring.
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2941
+      - lltc,ltc2942
+      - lltc,ltc2943
+      - lltc,ltc2944
+
+  reg:
+    maxItems: 1
+
+  lltc,resistor-sense:
+    $ref: /schemas/types.yaml#/definitions/int32
+    description: |
+      Sense resistor value in milli-ohms.
+      Can be negative value when the battery has been connected to the wrong end of the resistor.
+
+  lltc,prescaler-exponent:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The prescaler exponent as explained in the datasheet.
+      This determines the range and accuracy of the gauge.
+      The value is programmed into the chip only if it differs from the current setting.
+      The setting is lost when the battery is disconnected.
+
+required:
+  - compatible
+  - reg
+  - lltc,resistor-sense
+  - lltc,prescaler-exponent
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      battery@64 {
+        compatible = "lltc,ltc2943";
+        reg = <0x64>;
+        lltc,resistor-sense = <15>;
+        lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt b/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt
deleted file mode 100644
index 0355a4b68f79..000000000000
--- a/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Binding for TI/National Semiconductor LP8727 Charger
-
-Required properties:
-- compatible: "ti,lp8727"
-- reg: I2C slave address 27h
-
-Optional properties:
-- interrupts: interrupt specifier (see interrupt binding[0])
-- debounce-ms: interrupt debounce time. (u32)
-
-AC and USB charging parameters
-- charger-type: "ac" or "usb" (string)
-- eoc-level: value of 'enum lp8727_eoc_level' (u8)
-- charging-current: value of 'enum lp8727_ichg' (u8)
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Example)
-
-lp8727@27 {
-	compatible = "ti,lp8727";
-	reg = <0x27>;
-
-	/* GPIO 134 is used for LP8728 interrupt pin */
-	interrupt-parent = <&gpio5>; 	/* base = 128 */
-	interrupts = <6 0x2>;		/* offset = 6, falling edge type */
-
-	debounce-ms = <300>;
-
-	/* AC charger: 5% EOC and 500mA charging current */
-	ac {
-		charger-type = "ac";
-		eoc-level = /bits/ 8 <0>;
-		charging-current = /bits/ 8 <4>;
-	};
-
-	/* USB charger: 10% EOC and 400mA charging current */
-	usb {
-		charger-type = "usb";
-		eoc-level = /bits/ 8 <1>;
-		charging-current = /bits/ 8 <2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/power/supply/lt3651-charger.txt b/Documentation/devicetree/bindings/power/supply/lt3651-charger.txt
deleted file mode 100644
index 40811ff8de10..000000000000
--- a/Documentation/devicetree/bindings/power/supply/lt3651-charger.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Analog Devices LT3651 Charger Power Supply bindings: lt3651-charger
-
-Required properties:
-- compatible: Should contain one of the following:
- * "lltc,ltc3651-charger", (DEPRECATED: Use "lltc,lt3651-charger")
- * "lltc,lt3651-charger"
- - lltc,acpr-gpios: Connect to ACPR output. See remark below.
-
-Optional properties:
- - lltc,fault-gpios: Connect to FAULT output. See remark below.
- - lltc,chrg-gpios: Connect to CHRG output. See remark below.
-
-The lt3651 outputs are open-drain type and active low. The driver assumes the
-GPIO reports "active" when the output is asserted, so if the pins have been
-connected directly, the GPIO flags should be set to active low also.
-
-The driver will attempt to aquire interrupts for all GPIOs to detect changes in
-line state. If the system is not capabale of providing interrupts, the driver
-cannot report changes and userspace will need to periodically read the sysfs
-attributes to detect changes.
-
-Example:
-
-	charger: battery-charger {
-		compatible = "lltc,lt3651-charger";
-		lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>;
-		lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>;
-		lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/ltc2941.txt b/Documentation/devicetree/bindings/power/supply/ltc2941.txt
deleted file mode 100644
index 3b9ba147b041..000000000000
--- a/Documentation/devicetree/bindings/power/supply/ltc2941.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery gauges
-
-All chips measure battery capacity.
-The LTC2942 is pin compatible with the LTC2941, it adds voltage and
-temperature monitoring, and is runtime detected. LTC2943 and LTC2944
-is software compatible, uses a slightly different conversion formula
-for the charge counter and adds voltage, current and temperature monitoring.
-
-Required properties:
-- compatible: Should contain "lltc,ltc2941", "lltc,ltc2942", "lltc,ltc2943"
-    or "lltc,ltc2944" which also indicates the type of I2C chip attached.
-- reg: The 7-bit I2C address.
-- lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
-    negative value when the battery has been connected to the wrong end of the
-    resistor.
-- lltc,prescaler-exponent: The prescaler exponent as explained in the datasheet.
-    This determines the range and accuracy of the gauge. The value is programmed
-    into the chip only if it differs from the current setting. The setting is
-    lost when the battery is disconnected.
-
-Example from the Topic Miami Florida board:
-
-	fuelgauge: ltc2943@64 {
-		compatible = "lltc,ltc2943";
-		reg = <0x64>;
-		lltc,resistor-sense = <15>;
-		lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
new file mode 100644
index 000000000000..cfffaeef8b09
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Topic Embedded Products
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ltc4162-l.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology (Analog Devices) LTC4162-L Charger
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+  The LTC ® 4162-L is an advanced monolithic synchronous step-down switching
+  battery charger and PowerPath (TM) manager that seamlessly manages power
+  distribution between input sources such as wall adapters, backplanes, solar
+  panels, etc., and a rechargeable Lithium-Ion/Polymer battery.
+
+  Specifications about the charger can be found at:
+    https://www.analog.com/en/products/ltc4162-s.html
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc4162-l
+
+  reg:
+    maxItems: 1
+    description: I2C address of the charger.
+
+  lltc,rsnsb-micro-ohms:
+    description: Battery sense resistor in microohm.
+    minimum: 1000
+
+  lltc,rsnsi-micro-ohms:
+    description: Input current sense resistor in microohm.
+    minimum: 1000
+
+  lltc,cell-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Number of battery cells. If not provided, will be obtained from the chip
+      once the external power is applied. Omit this when the number of cells
+      is somewhat dynamic. Without it, several measurements will return 0 until
+      the charger is connected to an external supply.
+
+required:
+  - compatible
+  - reg
+  - lltc,rsnsb-micro-ohms
+  - lltc,rsnsi-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      charger: battery-charger@68 {
+              compatible = "lltc,ltc4162-l";
+              reg = <0x68>;
+              lltc,rsnsb-micro-ohms = <10000>;
+              lltc,rsnsi-micro-ohms = <16000>;
+              lltc,cell-count = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/max17040_battery.txt b/Documentation/devicetree/bindings/power/supply/max17040_battery.txt
deleted file mode 100644
index 4e0186b8380f..000000000000
--- a/Documentation/devicetree/bindings/power/supply/max17040_battery.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-max17040_battery
-~~~~~~~~~~~~~~~~
-
-Required properties :
- - compatible : "maxim,max17040" or "maxim,max77836-battery"
- - reg: i2c slave address
-
-Optional properties :
-- maxim,alert-low-soc-level :	The alert threshold that sets the state of
-				charge level (%) where an interrupt is
-				generated. Can be configured from 1 up to 32
-				(%). If skipped the power up default value of
-				4 (%) will be used.
-- interrupts : 			Interrupt line see Documentation/devicetree/
-				bindings/interrupt-controller/interrupts.txt
-- wakeup-source :		This device has wakeup capabilities. Use this
-				property to use alert low SOC level interrupt
-				as wake up source.
-
-Optional properties support interrupt functionality for alert low state of
-charge level, present in some ICs in the same family, and should be used with
-compatible "maxim,max77836-battery".
-
-Example:
-
-	battery-fuel-gauge@36 {
-		compatible = "maxim,max77836-battery";
-		reg = <0x36>;
-		maxim,alert-low-soc-level = <10>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/max17042_battery.txt b/Documentation/devicetree/bindings/power/supply/max17042_battery.txt
deleted file mode 100644
index f34c5daae9af..000000000000
--- a/Documentation/devicetree/bindings/power/supply/max17042_battery.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-max17042_battery
-~~~~~~~~~~~~~~~~
-
-Required properties :
- - compatible : one of the following
- * "maxim,max17042"
- * "maxim,max17047"
- * "maxim,max17050"
- * "maxim,max17055"
-
-Optional properties :
- - maxim,rsns-microohm : Resistance of rsns resistor in micro Ohms
-                         (datasheet-recommended value is 10000).
-   Defining this property enables current-sense functionality.
-
-Optional threshold properties :
- If skipped the condition won't be reported.
- - maxim,cold-temp :      Temperature threshold to report battery
-                          as cold (in tenths of degree Celsius).
- - maxim,over-heat-temp : Temperature threshold to report battery
-                          as over heated (in tenths of degree Celsius).
- - maxim,dead-volt :      Voltage threshold to report battery
-                          as dead (in mV).
- - maxim,over-volt :      Voltage threshold to report battery
-                          as over voltage (in mV).
-
-Example:
-
-	battery-charger@36 {
-		compatible = "maxim,max17042";
-		reg = <0x36>;
-		maxim,rsns-microohm = <10000>;
-		maxim,over-heat-temp = <600>;
-		maxim,over-volt = <4300>;
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
index deef010ec535..62eeddb65aed 100644
--- a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
@@ -32,3 +32,6 @@ properties:
 
 required:
   - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/max8903-charger.txt b/Documentation/devicetree/bindings/power/supply/max8903-charger.txt
deleted file mode 100644
index bab947fef025..000000000000
--- a/Documentation/devicetree/bindings/power/supply/max8903-charger.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Maxim Semiconductor MAX8903 Battery Charger bindings
-
-Required properties:
-- compatible: "maxim,max8903" for MAX8903 Battery Charger
-- dok-gpios: Valid DC power has been detected (active low, input), optional if uok-gpios is provided
-- uok-gpios: Valid USB power has been detected (active low, input), optional if dok-gpios is provided
-
-Optional properties:
-- cen-gpios: Charge enable pin (active low, output)
-- chg-gpios: Charger status pin (active low, input)
-- flt-gpios: Fault pin (active low, output)
-- dcm-gpios: Current limit mode setting (DC=1 or USB=0, output)
-- usus-gpios: USB suspend pin (active high, output)
-
-
-Example:
-
-	max8903-charger {
-		compatible = "maxim,max8903";
-		dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-		flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-		chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
-		cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt
deleted file mode 100644
index 55967a0bee11..000000000000
--- a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Devicetree bindings for Maxim DS2760
-====================================
-
-The ds2760 is a w1 slave device and must hence have its sub-node in DT
-under a w1 bus master node.
-
-The device exposes a power supply, so the details described in
-Documentation/devicetree/bindings/power/supply/power_supply.txt apply.
-
-Required properties:
-- compatible: must be "maxim,ds2760"
-
-Optional properties:
-- power-supplies:	Refers to one or more power supplies connected to
-			this battery.
-- maxim,pmod-enabled:	This boolean property enables the DS2760 to enter
-			sleep mode when the DQ line goes low for greater
-			than 2 seconds and leave sleep Mode when the DQ
-			line goes high.
-- maxim,cache-time-ms:	Time im milliseconds to cache the data for. When
-			this time expires, the values are read again from
-			the hardware. Defaults to 1000.
-- rated-capacity-microamp-hours:
-			The rated capacity of the battery, in mAh.
-			If not specified, the value stored in the
-			non-volatile chip memory is used.
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml
new file mode 100644
index 000000000000..c838efcf7e16
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim DS2760 DT bindings
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  The ds2760 is a w1 slave device and must hence have its sub-node in
+  DT under a w1 bus master node.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,ds2760
+
+  maxim,pmod-enabled:
+    description: |
+      Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds
+      and leave sleep Mode when the DQ line goes high.
+    type: boolean
+
+  maxim,cache-time-ms:
+    description: |
+      Time im milliseconds to cache the data for.
+      When this time expires, the values are read again from the hardware.
+      Defaults to 1000.
+
+  rated-capacity-microamp-hours:
+    description: |
+      The rated capacity of the battery, in mAh.
+      If not specified, the value stored in the non-volatile chip memory is used.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
new file mode 100644
index 000000000000..4d3a1d09036f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577-charger
+      - maxim,max77836-charger
+
+  maxim,constant-uvolt:
+    description:
+      Battery Constant Voltage in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 4000000
+    maximum: 4350000
+
+  maxim,eoc-uamp:
+    description: |
+      Current in uA for End-Of-Charge mode.
+      MAX14577: 50000-20000
+      MAX77836: 5000-100000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  maxim,fast-charge-uamp:
+    description: |
+      Current in uA for Fast Charge
+      MAX14577: 90000-950000
+      MAX77836: 45000-475000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  maxim,ovp-uvolt:
+    description:
+      OverVoltage Protection Threshold in uV; In an overvoltage condition, INT
+      asserts and charging stops.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [6000000, 6500000, 7000000, 7500000]
+
+required:
+  - compatible
+  - maxim,constant-uvolt
+  - maxim,eoc-uamp
+  - maxim,fast-charge-uamp
+  - maxim,ovp-uvolt
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577-charger
+    then:
+      properties:
+        maxim,eoc-uamp:
+          minimum: 50000
+          maximum: 200000
+        maxim,fast-charge-uamp:
+          minimum: 90000
+          maximum: 950000
+    else:
+      # max77836
+      properties:
+        maxim,eoc-uamp:
+          minimum: 5000
+          maximum: 100000
+        maxim,fast-charge-uamp:
+          minimum: 45000
+          maximum: 475000
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt
deleted file mode 100644
index f956247d493e..000000000000
--- a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Maxim MAX14656 / AL32 USB Charger Detector
-
-Required properties :
-- compatible : "maxim,max14656";
-- reg: i2c slave address
-- interrupts: interrupt line
-
-Example:
-
-&i2c2 {
-	clock-frequency = <50000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-
-	max14656@35 {
-		compatible = "maxim,max14656";
-		reg = <0x35>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_charger_detect>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
new file mode 100644
index 000000000000..070ef6f96e60
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max14656.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14656 DT bindings
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,max14656
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger-detector@35 {
+        compatible = "maxim,max14656";
+        reg = <0x35>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
new file mode 100644
index 000000000000..3a529326ecbd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max17040.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 17040 fuel gauge series
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max17040
+      - maxim,max17041
+      - maxim,max17043
+      - maxim,max17044
+      - maxim,max17048
+      - maxim,max17049
+      - maxim,max17058
+      - maxim,max17059
+      - maxim,max77836-battery
+
+  reg:
+    maxItems: 1
+
+  maxim,alert-low-soc-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description: |
+      The alert threshold that sets the state of charge level (%) where an interrupt is generated.
+      If skipped the power up default value of 4 (%) will be used.
+
+  maxim,double-soc:
+    type: boolean
+    description: |
+      Certain devices return double the capacity.
+      Specify this to divide the reported value in 2 and thus normalize it.
+      SoC == State of Charge == Capacity.
+
+  maxim,rcomp:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 2
+    description: |
+      A value to compensate readings for various battery chemistries and operating temperatures.
+      max17040,41 have 2 byte rcomp, default to 0x97 0x00.
+      All other devices have one byte rcomp, default to 0x97.
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: |
+      Use this property to use alert low SoC level interrupt as wake up source.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@36 {
+        compatible = "maxim,max17048";
+        reg = <0x36>;
+        maxim,rcomp = /bits/ 8 <0x56>;
+        maxim,alert-low-soc-level = <10>;
+        maxim,double-soc;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@36 {
+        compatible = "maxim,max77836-battery";
+        reg = <0x36>;
+        maxim,alert-low-soc-level = <10>;
+        interrupt-parent = <&gpio7>;
+        interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+        wakeup-source;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
new file mode 100644
index 000000000000..aff5d0792e0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max17042.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 17042 fuel gauge series
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max17042
+      - maxim,max17047
+      - maxim,max17050
+      - maxim,max17055
+      - maxim,max77849-battery
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: |
+      The ALRT pin, an open-drain interrupt.
+
+  maxim,rsns-microohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000).
+      Defining this property enables current-sense functionality.
+
+  maxim,cold-temp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Temperature threshold to report battery as cold (in tenths of degree Celsius).
+      Default is not to report cold events.
+
+  maxim,over-heat-temp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Temperature threshold to report battery as over heated (in tenths of degree Celsius).
+      Default is not to report over heating events.
+
+  maxim,dead-volt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Voltage threshold to report battery as dead (in mV).
+      Default is not to report dead battery events.
+
+  maxim,over-volt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Voltage threshold to report battery as over voltage (in mV).
+      Default is not to report over-voltage events.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@36 {
+        compatible = "maxim,max17042";
+        reg = <0x36>;
+        maxim,rsns-microohm = <10000>;
+        maxim,over-heat-temp = <600>;
+        maxim,over-volt = <4300>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
new file mode 100644
index 000000000000..f5fd53debbc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77693-charger
+
+  maxim,constant-microvolt:
+    description: |
+      Battery constant voltage in uV. The charger will operate in fast
+      charge constant current mode till battery voltage reaches this level.
+      Then the charger will switch to fast charge constant voltage mode.
+      Also vsys (system voltage) will be set to this value when DC power is
+      supplied but charger is not enabled.
+      Valid values: 3650000 - 4400000, step by 25000 (rounded down)
+    minimum: 3650000
+    maximum: 4400000
+    default: 4200000
+
+  maxim,min-system-microvolt:
+    description: |
+      Minimal system voltage in uV.
+    enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000,
+           3600000, 3700000]
+    default: 3600000
+
+  maxim,thermal-regulation-celsius:
+    description: |
+      Temperature in Celsius for entering high temperature charging mode.
+      If die temperature exceeds this value the charging current will be
+      reduced by 105 mA/Celsius.
+    enum: [70, 85, 100, 115]
+    default: 100
+
+  maxim,battery-overcurrent-microamp:
+    description: |
+      Overcurrent protection threshold in uA (current from battery to
+      system).
+      Valid values: 2000000 - 3500000, step by 250000 (rounded down)
+    minimum: 2000000
+    maximum: 3500000
+    default: 3500000
+
+  maxim,charge-input-threshold-microvolt:
+    description: |
+      Threshold voltage in uV for triggering input voltage regulation loop.
+      If input voltage decreases below this value, the input current will
+      be reduced to reach the threshold voltage.
+    enum: [4300000, 4700000, 4800000, 4900000]
+    default: 4300000
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
new file mode 100644
index 000000000000..f23dcc50793e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77976.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77976 Battery charger
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+description: |
+  The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger
+  configured via I2C.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,max77976
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6b {
+        compatible = "maxim,max77976";
+        reg = <0x6b>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
new file mode 100644
index 000000000000..a8d625f285f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max8903.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Semiconductor MAX8903 Battery Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,max8903
+
+  dok-gpios:
+    maxItems: 1
+    description: Valid DC power has been detected (active low, input)
+
+  uok-gpios:
+    maxItems: 1
+    description: Valid USB power has been detected (active low, input)
+
+  cen-gpios:
+    maxItems: 1
+    description: Charge enable pin (active low, output)
+
+  chg-gpios:
+    maxItems: 1
+    description: Charger status pin (active low, input)
+
+  flt-gpios:
+    maxItems: 1
+    description: Fault pin (active low, output)
+
+  dcm-gpios:
+    maxItems: 1
+    description: Current limit mode setting (DC=1 or USB=0, output)
+
+  usus-gpios:
+    maxItems: 1
+    description: USB suspend pin (active high, output)
+
+required:
+  - compatible
+
+anyOf:
+  - required:
+      - dok-gpios
+  - required:
+      - uok-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    charger {
+      compatible = "maxim,max8903";
+      dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+      flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+      chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+      cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
new file mode 100644
index 000000000000..fd491c598a00
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 Battery Charger
+
+maintainers:
+  - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
+
+properties:
+  compatible:
+    const: mediatek,mt6370-charger
+
+  interrupts:
+    description: |
+      Specify what irqs are needed to be handled by MT6370 Charger driver.
+      We need to use the IRQ "MT6370_IRQ_OVPCTRL_UVP_D" to know when USB
+      is plugged in, and then the driver will enable BC1.2 detection.
+      After the hardware of MT6370 completes the BC1.2 detection,
+      IRQ "MT6370_IRQ_ATTACH" will be triggered, and the driver will know
+      the result of BC1.2 detection.
+      When the IRQ "MT6370_IRQ_CHG_MIVR" is triggered, it means that the
+      hardware enters the "Minimum Input Voltage Regulation loop" and
+      a workaround needs to be applied at this time.
+      In summary, "MT6370_IRQ_OVPCTRL_UVP_D", "MT6370_IRQ_ATTACH" and
+      "MT6370_IRQ_CHG_MIVR" are required in this charger driver.
+    items:
+      - description: irq of "USB is plugged in"
+      - description: irq of "BC1.2 is done"
+      - description: irq of "Minimum Input Voltage Regulation loop is active"
+
+  interrupt-names:
+    items:
+      - const: uvp_d_evt
+      - const: attach_i
+      - const: mivr
+
+  io-channels:
+    description: |
+      Use ADC channel to read VBUS, IBUS, IBAT, etc., info.
+    minItems: 1
+    items:
+      - description: |
+          VBUS voltage with lower accuracy (+-75mV) but higher measure
+          range (1~22V)
+      - description: |
+          VBUS voltage with higher accuracy (+-30mV) but lower measure
+          range (1~9.76V)
+      - description: the main system input voltage
+      - description: battery voltage
+      - description: battery temperature-sense input voltage
+      - description: IBUS current (required)
+      - description: battery current
+      - description: |
+          regulated output voltage to supply for the PWM low-side gate driver
+          and the bootstrap capacitor
+      - description: IC junction temperature
+
+  io-channel-names:
+    minItems: 1
+    items:
+      - const: vbusdiv5
+      - const: vbusdiv2
+      - const: vsys
+      - const: vbat
+      - const: ts_bat
+      - const: ibus
+      - const: ibat
+      - const: chg_vddp
+      - const: temp_jc
+
+  usb-otg-vbus-regulator:
+    type: object
+    description: OTG boost regulator.
+    unevaluatedProperties: false
+    $ref: /schemas/regulator/regulator.yaml#
+
+    properties:
+      enable-gpios:
+        maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - io-channels
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.txt b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.txt
deleted file mode 100644
index 1d284ad816bf..000000000000
--- a/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Microchip UCS1002 USB Port Power Controller
-
-Required properties:
-- compatible		: Should be "microchip,ucs1002";
-- reg			: I2C slave address
-
-Optional properties:
-- interrupts		: A list of interrupts lines present (could be either
-			  corresponding to A_DET# pin, ALERT# pin, or both)
-- interrupt-names	: A list of interrupt names. Should contain (if
-			  present):
-			  - "a_det" for line connected to A_DET# pin
-			  - "alert" for line connected to ALERT# pin
-			  Both are expected to be IRQ_TYPE_EDGE_BOTH
-Example:
-
-&i2c3 {
-	charger@32 {
-		compatible = "microchip,ucs1002";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ucs1002_pins>;
-		reg = <0x32>;
-		interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
-				      <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
-		interrupt-names = "a_det", "alert";
-	};
-};
diff --git a/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml
new file mode 100644
index 000000000000..b9bd1591ed7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/microchip,ucs1002.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip UCS1002 USB Port Power Controller
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    const: microchip,ucs1002
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: a_det
+          - const: alert
+      - const: a_det
+      - const: alert
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@32 {
+            compatible = "microchip,ucs1002";
+            reg = <0x32>;
+            interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+                                  <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+            interrupt-names = "a_det", "alert";
+       };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
new file mode 100644
index 000000000000..b89b15a5bfa4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mt6360_charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for MT6360 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  This module is part of the MT6360 MFD device.
+  Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
+
+properties:
+  compatible:
+    const: mediatek,mt6360-chg
+
+  richtek,vinovp-microvolt:
+    description: Maximum CHGIN regulation voltage in uV.
+    enum: [ 5500000, 6500000, 11000000, 14500000 ]
+
+
+  usb-otg-vbus-regulator:
+    type: object
+    description: OTG boost regulator.
+    $ref: /schemas/regulator/regulator.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    mt6360_charger: charger {
+      compatible = "mediatek,mt6360-chg";
+      richtek,vinovp-microvolt = <14500000>;
+
+      otg_vbus_regulator: usb-otg-vbus-regulator {
+        regulator-compatible = "usb-otg-vbus";
+        regulator-name = "usb-otg-vbus";
+        regulator-min-microvolt = <4425000>;
+        regulator-max-microvolt = <5825000>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml
new file mode 100644
index 000000000000..5178e6207271
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/nokia,n900-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nokia N900 battery
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: nokia,n900-battery
+
+  io-channels:
+    items:
+      - description: ADC channel for temperature reading
+      - description: ADC channel for battery size identification
+      - description: ADC channel to measure the battery voltage
+
+  io-channel-names:
+    items:
+      - const: temp
+      - const: bsi
+      - const: vbat
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    battery {
+      compatible = "nokia,n900-battery";
+      io-channels = <&twl4030_madc 0>,
+                    <&twl4030_madc 4>,
+                    <&twl4030_madc 12>;
+      io-channel-names = "temp",
+                         "bsi",
+                         "vbat";
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml
new file mode 100644
index 000000000000..dd89e2532a07
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/olpc-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OLPC Battery
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: olpc,xo1.5-battery
+          - const: olpc,xo1-battery
+      - items:
+          - const: olpc,xo1-battery
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/olpc_battery.txt b/Documentation/devicetree/bindings/power/supply/olpc_battery.txt
deleted file mode 100644
index 8d87d6b35a98..000000000000
--- a/Documentation/devicetree/bindings/power/supply/olpc_battery.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-OLPC battery
-~~~~~~~~~~~~
-
-Required properties:
-  - compatible : "olpc,xo1-battery" or "olpc,xo1.5-battery"
diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
new file mode 100644
index 000000000000..2f672e6e8d72
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Power Supply Core Support
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  power-supplies:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      This property is added to a supply in order to list the devices which
+      supply it power, referenced by their phandles.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/power/supply/power_supply.txt b/Documentation/devicetree/bindings/power/supply/power_supply.txt
deleted file mode 100644
index 8391bfa0edac..000000000000
--- a/Documentation/devicetree/bindings/power/supply/power_supply.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Power Supply Core Support
-
-Optional Properties:
- - power-supplies : This property is added to a supply in order to list the
-   devices which supply it power, referenced by their phandles.
-
-Example:
-
-	usb-charger: power@e {
-		compatible = "some,usb-charger";
-		...
-	};
-
-	ac-charger: power@c {
-		compatible = "some,ac-charger";
-		...
-	};
-
-	battery@b {
-		compatible = "some,battery";
-		...
-		power-supplies = <&usb-charger>, <&ac-charger>;
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/supply/qcom,coincell-charger.txt
deleted file mode 100644
index 747899223262..000000000000
--- a/Documentation/devicetree/bindings/power/supply/qcom,coincell-charger.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Qualcomm Coincell Charger:
-
-The hardware block controls charging for a coincell or capacitor that is
-used to provide power backup for certain features of the power management
-IC (PMIC)
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be: "qcom,pm8941-coincell"
-
-- reg:
-	Usage: required
-	Value type: <u32>
-	Definition: base address of the coincell charger registers
-
-- qcom,rset-ohms:
-	Usage: required
-	Value type: <u32>
-	Definition: resistance (in ohms) for current-limiting resistor
-		must be one of: 800, 1200, 1700, 2100
-
-- qcom,vset-millivolts:
-	Usage: required
-	Value type: <u32>
-	Definition: voltage (in millivolts) to apply for charging
-		must be one of: 2500, 3000, 3100, 3200
-
-- qcom,charger-disable:
-	Usage: optional
-	Value type: <boolean>
-	Definition: defining this property disables charging
-
-This charger is a sub-node of one of the 8941 PMIC blocks, and is specified
-as a child node in DTS of that node.  See ../mfd/qcom,spmi-pmic.txt and
-../mfd/qcom-pm8xxx.txt
-
-Example:
-
-	pm8941@0 {
-		coincell@2800 {
-			compatible = "qcom,pm8941-coincell";
-			reg = <0x2800>;
-
-			qcom,rset-ohms = <2100>;
-			qcom,vset-millivolts = <3000>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
new file mode 100644
index 000000000000..cbac55d3cb92
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Switch-Mode Battery Charger and Boost
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8226-charger
+      - qcom,pm8941-charger
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: charge done
+      - description: charge fast mode
+      - description: charge trickle mode
+      - description: battery temperature ok
+      - description: battery present
+      - description: charger disconnected
+      - description: USB-in valid
+      - description: DC-in valid
+
+  interrupt-names:
+    items:
+      - const: chg-done
+      - const: chg-fast
+      - const: chg-trkl
+      - const: bat-temp-ok
+      - const: bat-present
+      - const: chg-gone
+      - const: usb-valid
+      - const: dc-valid
+
+  qcom,fast-charge-current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 3000000
+    description: Maximum charge current in uA; May be clamped to safety limits; Defaults to 1A
+
+  qcom,fast-charge-low-threshold-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2100000
+    maximum: 3600000
+    description: |
+      Battery voltage limit in uV above which fast charging may operate; Defaults to 3.2V
+      Below this value linear or switch-mode auto-trickle-charging will operate.
+
+  qcom,fast-charge-high-threshold-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3240000
+    maximum: 5000000
+    description: |
+      Battery voltage limit in uV below which fast charging may operate; Defaults to 4.2V
+      The fast charger will attempt to charge the battery to this voltage.
+      May be clamped to safety limits.
+
+  qcom,fast-charge-safe-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3240000
+    maximum: 5000000
+    description: |
+      Maximum safe battery voltage in uV; May be pre-set by bootloader, in which case,
+      setting this will harmlessly fail. The property 'fast-charge-high-watermark' will
+      be clamped by this value. Defaults to 4.2V.
+
+  qcom,fast-charge-safe-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 3000000
+    description: |
+      Maximum safe battery charge current in uA; May pre-set by bootloader, in which case,
+      setting this will harmlessly fail. The property 'qcom,fast-charge-current-limit'
+      will be clamped by this value. Defaults to 1A.
+
+  qcom,auto-recharge-threshold-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3240000
+    maximum: 5000000
+    description: |
+      Battery voltage limit in uV below which auto-recharge functionality will restart charging
+      after end-of-charge; The high cutoff limit for auto-recharge is 5% above this value.
+      Defaults to 4.1V.
+
+  qcom,minimum-input-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 4200000
+    maximum: 9600000
+    description: |
+      Input voltage level in uV above which charging may operate. Defaults to 4.3V.
+
+  qcom,dc-current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 2500000
+    description: |
+      Default DC charge current limit in uA. Defaults to 100mA.
+
+  qcom,disable-dc:
+    type: boolean
+    description: Disable DC charger
+
+  qcom,jeita-extended-temp-range:
+    type: boolean
+    description: |
+      Enable JEITA extended temperature range;  This does *not* adjust the maximum charge
+      voltage or current in the extended temperature range. It only allows charging when
+      the battery is in the extended temperature range. Voltage/current regulation must
+      be done externally to fully comply with the JEITA safety guidelines if this flag
+      is set.
+
+  usb-charge-current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 2500000
+    description: |
+      Default USB charge current limit in uA.
+
+  usb-otg-in-supply:
+    description: Reference to the regulator supplying power to the USB_OTG_IN pin.
+
+  otg-vbus:
+    $ref: /schemas/regulator/regulator.yaml#
+    description: |
+      This node defines a regulator used to control the direction of VBUS voltage.
+      Specifically whether to supply voltage to VBUS for host mode operation of the OTG port,
+      or allow input voltage from external VBUS for charging. In the hardware, the supply for
+      this regulator comes from usb_otg_in-supply.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@1000 {
+        compatible = "qcom,pm8941-charger";
+        reg = <0x1000>;
+        interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+        interrupt-names = "chg-done",
+                          "chg-fast",
+                          "chg-trkl",
+                          "bat-temp-ok",
+                          "bat-present",
+                          "chg-gone",
+                          "usb-valid",
+                          "dc-valid";
+        qcom,fast-charge-current-limit = <1000000>;
+        qcom,dc-current-limit = <1000000>;
+        usb-otg-in-supply = <&pm8941_5vs1>;
+
+        otg-vbus {};
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml
new file mode 100644
index 000000000000..0450f4dd4e51
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-coincell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Coincell Charger
+
+description: |
+  The hardware block controls charging for a coincell or capacitor that is
+  used to provide power backup for certain features of the power management
+  IC (PMIC)
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    const: qcom,pm8941-coincell
+
+  reg:
+    maxItems: 1
+
+  qcom,rset-ohms:
+    description: resistance (in ohms) for current-limiting resistor
+    enum: [ 800, 1200, 1700, 2100 ]
+
+  qcom,vset-millivolts:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: voltage (in millivolts) to apply for charging
+    enum: [ 2500, 3000, 3100, 3200 ]
+
+  qcom,charger-disable:
+    type: boolean
+    description: defining this property disables charging
+
+required:
+  - compatible
+  - reg
+  - qcom,rset-ohms
+  - qcom,vset-millivolts
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@2800 {
+        compatible = "qcom,pm8941-coincell";
+        reg = <0x2800>;
+        qcom,rset-ohms = <2100>;
+        qcom,vset-millivolts = <3000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt
deleted file mode 100644
index 06f8a5ddb68e..000000000000
--- a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt
+++ /dev/null
@@ -1,150 +0,0 @@
-Qualcomm Switch-Mode Battery Charger and Boost
-
-PROPERTIES
-- compatible:
-  Usage: required
-  Value type: <stringlist>
-  Description: Must be one of:
-               - "qcom,pm8941-charger"
-
-- reg:
-  Usage: required
-  Value type: <prop-encoded-array>
-  Description: Base address of registers for SMBB block
-
-- interrupts:
-  Usage: required
-  Value type: <prop-encoded-array>
-  Description: The format of the specifier is defined by the binding document
-               describing the node's interrupt parent.  Must contain one
-               specifier for each of the following interrupts, in order:
-               - charge done
-               - charge fast mode
-               - charge trickle mode
-               - battery temperature ok
-               - battery present
-               - charger disconnected
-               - USB-in valid
-               - DC-in valid
-
-- interrupt-names:
-  Usage: required
-  Value type: <stringlist>
-  Description: Must contain the following list, strictly ordered:
-               "chg-done",
-               "chg-fast",
-               "chg-trkl",
-               "bat-temp-ok",
-               "bat-present",
-               "chg-gone",
-               "usb-valid",
-               "dc-valid"
-
-- qcom,fast-charge-current-limit:
-  Usage: optional (default: 1A, or pre-configured value)
-  Value type: <u32>; uA; range [100mA : 3A]
-  Description: Maximum charge current; May be clamped to safety limits.
-
-- qcom,fast-charge-low-threshold-voltage:
-  Usage: optional (default: 3.2V, or pre-configured value)
-  Value type: <u32>; uV; range [2.1V : 3.6V]
-  Description: Battery voltage limit above which fast charging may operate;
-               Below this value linear or switch-mode auto-trickle-charging
-               will operate.
-
-- qcom,fast-charge-high-threshold-voltage:
-  Usage: optional (default: 4.2V, or pre-configured value)
-  Value type: <u32>; uV; range [3.24V : 5V]
-  Description: Battery voltage limit below which fast charging may operate;
-               The fast charger will attempt to charge the battery to this
-               voltage.  May be clamped to safety limits.
-
-- qcom,fast-charge-safe-voltage:
-  Usage: optional (default: 4.2V, or pre-configured value)
-  Value type: <u32>; uV; range [3.24V : 5V]
-  Description: Maximum safe battery voltage; May be pre-set by bootloader, in
-               which case, setting this will harmlessly fail. The property
-               'fast-charge-high-watermark' will be clamped by this value.
-
-- qcom,fast-charge-safe-current:
-  Usage: optional (default: 1A, or pre-configured value)
-  Value type: <u32>; uA; range [100mA : 3A]
-  Description: Maximum safe battery charge current; May pre-set by bootloader,
-               in which case, setting this will harmlessly fail. The property
-               'qcom,fast-charge-current-limit' will be clamped by this value.
-
-- qcom,auto-recharge-threshold-voltage:
-  Usage: optional (default: 4.1V, or pre-configured value)
-  Value type: <u32>; uV; range [3.24V : 5V]
-  Description: Battery voltage limit below which auto-recharge functionality
-               will restart charging after end-of-charge;  The high cutoff
-               limit for auto-recharge is 5% above this value.
-
-- qcom,minimum-input-voltage:
-  Usage: optional (default: 4.3V, or pre-configured value)
-  Value type: <u32>; uV; range [4.2V : 9.6V]
-  Description: Input voltage level above which charging may operate
-
-- qcom,dc-current-limit:
-  Usage: optional (default: 100mA, or pre-configured value)
-  Value type: <u32>; uA; range [100mA : 2.5A]
-  Description: Default DC charge current limit
-
-- qcom,disable-dc:
-  Usage: optional (default: false)
-  Value type: boolean: <u32> or <empty>
-  Description: Disable DC charger
-
-- qcom,jeita-extended-temp-range:
-  Usage: optional (default: false)
-  Value type: boolean: <u32> or <empty>
-  Description: Enable JEITA extended temperature range;  This does *not*
-               adjust the maximum charge voltage or current in the extended
-               temperature range.  It only allows charging when the battery
-               is in the extended temperature range.  Voltage/current
-               regulation must be done externally to fully comply with
-               the JEITA safety guidelines if this flag is set.
-
-- usb_otg_in-supply:
-  Usage: optional
-  Value type: <phandle>
-  Description: Reference to the regulator supplying power to the USB_OTG_IN
-               pin.
-
-child nodes:
-- otg-vbus:
-  Usage: optional
-  Description: This node defines a regulator used to control the direction
-               of VBUS voltage - specifically: whether to supply voltage
-               to VBUS for host mode operation of the OTG port, or allow
-               input voltage from external VBUS for charging.  In the
-               hardware, the supply for this regulator comes from
-               usb_otg_in-supply.
-
-EXAMPLE
-charger@1000 {
-       compatible = "qcom,pm8941-charger";
-       reg = <0x1000 0x700>;
-       interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
-       interrupt-names = "chg-done",
-                       "chg-fast",
-                       "chg-trkl",
-                       "bat-temp-ok",
-                       "bat-present",
-                       "chg-gone",
-                       "usb-valid",
-                       "dc-valid";
-
-       qcom,fast-charge-current-limit = <1000000>;
-       qcom,dc-charge-current-limit = <1000000>;
-       usb_otg_in-supply = <&pm8941_5vs1>;
-
-       otg-vbus {};
-};
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
new file mode 100644
index 000000000000..756c16d1727d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 PMIC Fuel Gauge
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: richtek,rt5033-battery
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@35 {
+        compatible = "richtek,rt5033-battery";
+        reg = <0x35>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@35 {
+        compatible = "richtek,rt5033-battery";
+        reg = <0x35>;
+        interrupt-parent = <&msmgpio>;
+        interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
new file mode 100644
index 000000000000..bce15101318e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9455.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Richtek rt9455 battery charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: richtek,rt9455
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  richtek,output-charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: output current from the charger to the battery, in uA.
+
+  richtek,end-of-charge-percentage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      percent of the output charge current. When the current in constant-voltage phase drops
+      below output_charge_current x end-of-charge-percentage, charge is terminated.
+
+  richtek,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum battery voltage in uV.
+
+  richtek,boost-output-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      maximum voltage provided to consumer devices, when the charger is in boost mode, in uV.
+
+  richtek,min-input-voltage-regulation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      input voltage level in uV, used to decrease voltage level when the over current of the
+      input power source occurs. This prevents input voltage drop due to insufficient
+      current provided by the power source. Defaults to 4500000 uV (4.5V).
+
+  richtek,avg-input-current-regulation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      input current value in uA drained by the charger from the power source.
+      Defaults to 500000 uA (500mA).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - richtek,output-charge-current
+  - richtek,end-of-charge-percentage
+  - richtek,battery-regulation-voltage
+  - richtek,boost-output-voltage
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@22 {
+        compatible = "richtek,rt9455";
+        reg = <0x22>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+        richtek,output-charge-current	    = <500000>;
+        richtek,end-of-charge-percentage    = <10>;
+        richtek,battery-regulation-voltage  = <4200000>;
+        richtek,boost-output-voltage	    = <5050000>;
+
+        richtek,min-input-voltage-regulation = <4500000>;
+        richtek,avg-input-current-regulation = <500000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
new file mode 100644
index 000000000000..24b06957b4ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/rohm,bd99954.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD99954 Battery charger
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Markus Laine <markus.laine@fi.rohmeurope.com>
+  - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
+
+description: |
+  The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
+  secondary battery intended to be used in space-constraint equipment such
+  as Low profile Notebook PC, Tablets and other applications. BD99954
+  provides a Dual-source Battery Charger, two port BC1.2 detection and a
+  Battery Monitor.
+
+
+properties:
+  compatible:
+    const: rohm,bd99954
+#
+#    The battery charging profile of BD99954.
+#
+#    Curve (1) represents charging current.
+#    Curve (2) represents battery voltage.
+#
+#    The BD99954 data sheet divides charging to three phases.
+#    a) Trickle-charge with constant current (8).
+#    b) pre-charge with constant current (6)
+#    c) fast-charge with:
+#       First a constant current (5) phase (CC)
+#       Then constant voltage (CV) phase (after the battery voltage has reached
+#       target level - until charging current has dropped to termination
+#       level (7)
+#
+#     V ^                                                        ^ I
+#       .                                                        .
+#       .                                                        .
+# (4)- -.- - - - - - - - - - - - - -  +++++++++++++++++++++++++++.
+#       .                            /                           .
+#       .                     ++++++/++ - - - - - - - - - - - - -.- - (5)
+#       .                     +    /  +                          .
+#       .                     +   -   --                         .
+#       .                     +  -     +                         .
+#       .                     +.-      -:                        .
+#       .                    .+         +`                       .
+#       .                  .- +       | `/                       .
+#       .               .."   +          .:                      .
+#       .             -"      +           --                     .
+#       .    (2)  ..."        +       |    :-                    .
+#       .    ...""            +             -:                   .
+# (3)- -.-.""- - - - -+++++++++ - - - - - - -.:- - - - - - - - - .- - (6)
+#       .             +                       `:.                .
+#       .             +               |         -:               .
+#       .             +                           -:             .
+#       .             +                             ..           .
+#       .   (1)       +               |               "+++- - - -.- - (7)
+#       -++++++++++++++- - - - - - - - - - - - - - - - - + - - - .- - (8)
+#       .                                                +       -
+#       -------------------------------------------------+++++++++-->
+#       |             |       |   CC   |      CV         |
+#       | --trickle-- | -pre- | ---------fast----------- |
+#
+#   The charger uses the following battery properties
+# - trickle-charge-current-microamp:
+#     Current used at trickle-charge phase (8 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - precharge-current-microamp:
+#     Current used at pre-charge phase (6 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - constant-charge-current-max-microamp
+#     Current used at fast charge constant current phase (5 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - constant-charge-voltage-max-microvolt
+#     The constant voltage used in fast charging phase (4 in above chart)
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+# - precharge-upper-limit-microvolt
+#     charging mode is changed from trickle charging to pre-charging
+#     when battery voltage exceeds this limit voltage (3 in above chart)
+#     minimum: 2048000
+#     maximum: 19200000
+#     multipleOf: 64000
+# - re-charge-voltage-microvolt
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+#     re-charging is automatically started when battry has been discharging
+#     to the point where the battery voltage drops below this limit
+# - over-voltage-threshold-microvolt
+#     battery is expected to be faulty if battery voltage exceeds this limit.
+#     Charger will then enter to a "battery faulty" -state
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+# - charge-term-current-microamp
+#     minimum: 0
+#     maximum: 1024000
+#     multipleOf: 64000
+#     a charge cycle terminates when the battery voltage is above recharge
+#     threshold, and the current is below this setting (7 in above chart)
+#   See also Documentation/devicetree/bindings/power/supply/battery.yaml
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  monitored-battery:
+    description:
+      phandle of battery characteristics devicetree node
+
+  rohm,vsys-regulation-microvolt:
+    description: system specific lower limit for system voltage.
+    minimum: 2560000
+    maximum: 19200000
+    multipleOf: 64000
+
+  rohm,vbus-input-current-limit-microamp:
+    description: system specific VBUS input current limit (in microamps).
+    minimum: 32000
+    maximum: 16352000
+    multipleOf: 32000
+
+  rohm,vcc-input-current-limit-microamp:
+    description: system specific VCC/VACP input current limit (in microamps).
+    minimum: 32000
+    maximum: 16352000
+    multipleOf: 32000
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        charger@9 {
+            compatible = "rohm,bd99954";
+            monitored-battery = <&battery>;
+            reg = <0x9>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 8>;
+            rohm,vsys-regulation-microvolt = <8960000>;
+            rohm,vbus-input-current-limit-microamp = <1472000>;
+            rohm,vcc-input-current-limit-microamp = <1472000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt b/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt
deleted file mode 100644
index 1e6107c7578e..000000000000
--- a/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Binding for Richtek rt9455 battery charger
-
-Required properties:
-- compatible:				it should contain one of the following:
-					"richtek,rt9455".
-- reg:					integer, i2c address of the device.
-- interrupts:				interrupt mapping for GPIO IRQ, it should be
-					configured with IRQ_TYPE_LEVEL_LOW flag.
-- richtek,output-charge-current:	integer, output current from the charger to the
-					battery, in uA.
-- richtek,end-of-charge-percentage:	integer, percent of the output charge current.
-					When the current in constant-voltage phase drops
-					below output_charge_current x end-of-charge-percentage,
-					charge is terminated.
-- richtek,battery-regulation-voltage:	integer, maximum battery voltage in uV.
-- richtek,boost-output-voltage:		integer, maximum voltage provided to consumer
-					devices, when the charger is in boost mode, in uV.
-
-Optional properties:
-- richtek,min-input-voltage-regulation: integer, input voltage level in uV, used to
-					decrease voltage level when the over current
-					of the input power source occurs.
-					This prevents input voltage drop due to insufficient
-					current provided by the power source.
-					Default: 4500000 uV (4.5V)
-- richtek,avg-input-current-regulation: integer, input current value in uA drained by the
-					charger from the power source.
-					Default: 500000 uA (500mA)
-
-Example:
-
-rt9455@22 {
-	compatible = "richtek,rt9455";
-	reg = <0x22>;
-
-	interrupt-parent = <&gpio1>;
-	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-	richtek,output-charge-current	    = <500000>;
-	richtek,end-of-charge-percentage    = <10>;
-	richtek,battery-regulation-voltage  = <4200000>;
-	richtek,boost-output-voltage	    = <5050000>;
-
-	richtek,min-input-voltage-regulation = <4500000>;
-	richtek,avg-input-current-regulation = <500000>;
-};
diff --git a/Documentation/devicetree/bindings/power/supply/rx51-battery.txt b/Documentation/devicetree/bindings/power/supply/rx51-battery.txt
deleted file mode 100644
index 90438453db58..000000000000
--- a/Documentation/devicetree/bindings/power/supply/rx51-battery.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Binding for Nokia N900 battery
-
-The Nokia N900 battery status can be read via the TWL4030's A/D converter.
-
-Required properties:
-- compatible: Should contain one of the following:
- * "nokia,n900-battery"
-- io-channels: Should contain IIO channel specifiers
-               for each element in io-channel-names.
-- io-channel-names: Should contain the following values:
- * "temp" - The ADC channel for temperature reading
- * "bsi"  - The ADC channel for battery size identification
- * "vbat" - The ADC channel to measure the battery voltage
-
-Example from Nokia N900:
-
-battery: n900-battery {
-	compatible = "nokia,n900-battery";
-	io-channels = <&twl4030_madc 0>,
-		      <&twl4030_madc 4>,
-		      <&twl4030_madc 12>;
-	io-channel-names = "temp",
-			   "bsi",
-			   "vbat";
-};
diff --git a/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml b/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml
new file mode 100644
index 000000000000..40292d581b10
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/samsung,battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SDI Batteries
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Samsung SDI (Samsung Digital Interface) batteries are all different versions
+  of lithium ion chemistry devices used for mobile phones, laptops and other
+  portable electronics. The batteries are adapted to a specific product and
+  the physical restrictions make it impossible to use another battery with the
+  product, so product device trees can specify these batteries. Operating
+  systems should determine hardware characteristics of the batteries from the
+  compatible string.
+
+properties:
+  compatible:
+    oneOf:
+      - const: samsung,eb-l1m7flu
+        description: 3.8V 1500 mAh battery used in Samsung GT-I8190
+      - const: samsung,eb425161la
+        description: 3.8V 1500 mAh battery used in Samsung SGH-T599 and SGH-I407
+      - const: samsung,eb425161lu
+        description: 3.8V 1500 mAh battery used in Samsung GT-I8160
+      - const: samsung,eb485159lu
+        description: 3.8V 1700 mAh battery used in Samsung GT-S7710
+      - const: samsung,eb535151vu
+        description: 3.8V 1500 mAh battery used in Samsung GT-I9070
+      - const: samsung,eb585157lu
+        description: 3.8V 2000 mAh battery used in Samsung GT-I8530
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    power {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery: battery {
+        compatible = "samsung,eb425161la";
+      };
+
+      charger@11 {
+        reg = <0x11>;
+        monitored-battery = <&battery>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml
new file mode 100644
index 000000000000..90b9d3d882a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant battery
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Battery compatible with the smart battery system specifications
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,bq20z45
+              - ti,bq20z65
+              - ti,bq20z75
+          - enum:
+              - sbs,sbs-battery
+      - items:
+          - const: sbs,sbs-battery
+
+  reg:
+    maxItems: 1
+
+  sbs,i2c-retry-count:
+    description:
+      The number of times to retry I2C transactions on I2C IO failure.
+    default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  sbs,poll-retry-count:
+    description:
+      The number of times to try looking for new status after an external
+      change notification.
+    default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  sbs,battery-detect-gpios:
+    description:
+      GPIO which signals battery detection. If this is not supplied, the bus
+      needs to be polled to detect the battery.
+    maxItems: 1
+
+  sbs,disable-charger-broadcasts:
+    description:
+      SBS batteries by default send broadcast messages to SBS compliant chargers to
+      configure max. charge current/voltage. If your hardware does not have an SBS
+      compliant charger it should be disabled via this property to avoid blocking
+      the bus. Also some SBS battery fuel gauges are known to have a buggy multi-
+      master implementation.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        battery@b {
+            compatible = "ti,bq20z75", "sbs,sbs-battery";
+            reg = <0xb>;
+            sbs,i2c-retry-count = <2>;
+            sbs,poll-retry-count = <10>;
+            sbs,battery-detect-gpios = <&gpio 122 GPIO_ACTIVE_HIGH>;
+            sbs,disable-charger-broadcasts;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml
new file mode 100644
index 000000000000..cb73ffa4778e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Charger compatible with the smart battery system specifications
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - lltc,ltc4100
+          - enum:
+              - sbs,sbs-charger
+      - items:
+          - const: sbs,sbs-charger
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@9 {
+            compatible = "lltc,ltc4100", "sbs,sbs-charger";
+            reg = <0x9>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt
deleted file mode 100644
index 4b2195571a49..000000000000
--- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Binding for sbs-manager
-
-Required properties:
-- compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part
-  number compatible string might be used in order to take care of vendor
-  specific registers.
-- reg: integer, i2c address of the device. Should be <0xa>.
-Optional properties:
-- gpio-controller: Marks the port as GPIO controller.
-  See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
-- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell
-  is used to specify optional parameters:
-  See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
-
-From OS view the device is basically an i2c-mux used to communicate with up to
-four smart battery devices at address 0xb. The driver actually implements this
-behaviour. So standard i2c-mux nodes can be used to register up to four slave
-batteries. Channels will be numerated starting from 1 to 4.
-
-Example:
-
-batman@a {
-    compatible = "lltc,ltc1760", "sbs,sbs-manager";
-    reg = <0x0a>;
-    #address-cells = <1>;
-    #size-cells = <0>;
-
-    gpio-controller;
-    #gpio-cells = <2>;
-
-    i2c@1 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        reg = <1>;
-
-        battery@b {
-            compatible = "ti,bq2060", "sbs,sbs-battery";
-            reg = <0x0b>;
-            sbs,battery-detect-gpios = <&batman 1 1>;
-        };
-    };
-
-    i2c@2 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        reg = <2>;
-
-        battery@b {
-            compatible = "ti,bq2060", "sbs,sbs-battery";
-            reg = <0x0b>;
-            sbs,battery-detect-gpios = <&batman 2 1>;
-        };
-    };
-
-    i2c@3 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        reg = <3>;
-
-        battery@b {
-            compatible = "ti,bq2060", "sbs,sbs-battery";
-            reg = <0x0b>;
-            sbs,battery-detect-gpios = <&batman 3 1>;
-        };
-    };
-};
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
new file mode 100644
index 000000000000..99f506d6b0a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant manger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - lltc,ltc1760
+          - enum:
+              - sbs,sbs-manager
+      - items:
+          - const: sbs,sbs-manager
+
+  reg:
+    const: 0xa
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "^i2c@[1-4]$":
+    type: object
+    $ref: /schemas/i2c/i2c-controller.yaml#
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      batman: battery-manager@a {
+        compatible = "lltc,ltc1760", "sbs,sbs-manager";
+        reg = <0x0a>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        i2c@1 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <1>;
+
+          battery@b {
+            compatible = "ti,bq20z65", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 1 1>;
+          };
+        };
+
+        i2c@2 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <2>;
+
+          battery@b {
+            compatible = "ti,bq20z65", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 2 1>;
+          };
+        };
+
+        i2c@3 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <3>;
+
+          battery@b {
+            compatible = "ti,bq20z65", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 3 1>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
deleted file mode 100644
index 4e78e51018eb..000000000000
--- a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-SBS sbs-battery
-~~~~~~~~~~
-
-Required properties :
- - compatible: "<vendor>,<part-number>", "sbs,sbs-battery" as fallback. The
-     part number compatible string might be used in order to take care of
-     vendor specific registers.
-     Known <vendor>,<part-number>:
-       ti,bq20z75
-
-Optional properties :
- - sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
-   IO failure.
- - sbs,poll-retry-count : The number of times to try looking for new status
-   after an external change notification.
- - sbs,battery-detect-gpios : The gpio which signals battery detection and
-   a flag specifying its polarity.
-
-Example:
-
-	battery@b {
-		compatible = "ti,bq20z75", "sbs,sbs-battery";
-		reg = <0xb>;
-		sbs,i2c-retry-count = <2>;
-		sbs,poll-retry-count = <10>;
-		sbs,battery-detect-gpios = <&gpio-controller 122 1>;
-	}
diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
deleted file mode 100644
index 84e74151eef2..000000000000
--- a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-SBS sbs-charger
-~~~~~~~~~~
-
-Required properties:
- - compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part
-     number compatible string might be used in order to take care of vendor
-     specific registers.
-
-Optional properties:
-- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
-    "interrupt-parent". If an interrupt is not provided the driver will switch
-    automatically to polling.
-
-Example:
-
-	ltc4100@9 {
-		compatible = "lltc,ltc4100", "sbs,sbs-charger";
-		reg = <0x9>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
new file mode 100644
index 000000000000..eeb043f9bb4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sc2731-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC2731 PMICs battery charger binding
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: sprd,sc2731-charger
+
+  reg:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+    description: phandle to the USB phy
+
+  monitored-battery:
+    description: |
+      The charger uses the following battery properties
+      - charge-term-current-microamp: current for charge termination phase.
+      - constant-charge-voltage-max-microvolt: maximum constant input voltage.
+      See Documentation/devicetree/bindings/power/supply/battery.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      charge-term-current-microamp = <120000>;
+      constant-charge-voltage-max-microvolt = <4350000>;
+    };
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@a00 {
+        compatible = "sprd,sc2731-charger";
+        reg = <0x0>;
+        phys = <&ssphy>;
+        monitored-battery = <&bat>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt b/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt
deleted file mode 100644
index 5266fab16575..000000000000
--- a/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Spreadtrum SC2731 PMIC battery charger binding
-
-Required properties:
- - compatible: Should be "sprd,sc2731-charger".
- - reg: Address offset of charger register.
- - phys: Contains a phandle to the USB phy.
-
-Optional Properties:
-- monitored-battery: phandle of battery characteristics devicetree node.
-  The charger uses the following battery properties:
-- charge-term-current-microamp: current for charge termination phase.
-- constant-charge-voltage-max-microvolt: maximum constant input voltage.
-  See Documentation/devicetree/bindings/power/supply/battery.txt
-
-Example:
-
-	bat: battery {
-		compatible = "simple-battery";
-		charge-term-current-microamp = <120000>;
-		constant-charge-voltage-max-microvolt = <4350000>;
-		......
-	};
-
-	sc2731_pmic: pmic@0 {
-		compatible = "sprd,sc2731";
-		reg = <0>;
-		spi-max-frequency = <26000000>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		charger@0 {
-			compatible = "sprd,sc2731-charger";
-			reg = <0x0>;
-			phys = <&ssphy>;
-			monitored-battery = <&bat>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt
deleted file mode 100644
index b6359b590383..000000000000
--- a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings
-
-Required properties:
-- compatible: Should be one of the following:
-  "sprd,sc2720-fgu",
-  "sprd,sc2721-fgu",
-  "sprd,sc2723-fgu",
-  "sprd,sc2730-fgu",
-  "sprd,sc2731-fgu".
-- reg: The address offset of fuel gauge unit.
-- battery-detect-gpios: GPIO for battery detection.
-- io-channels: Specify the IIO ADC channels to get temperature and charge voltage.
-- io-channel-names: Should be "bat-temp" or "charge-vol".
-- nvmem-cells: A phandle to the calibration cells provided by eFuse device.
-- nvmem-cell-names: Should be "fgu_calib".
-- sprd,calib-resistance-micro-ohms: Specify the real resistance of coulomb counter
-  chip in micro Ohms.
-- monitored-battery: Phandle of battery characteristics devicetree node.
-  See Documentation/devicetree/bindings/power/supply/battery.txt
-
-Example:
-
-	bat: battery {
-		compatible = "simple-battery";
-		charge-full-design-microamp-hours = <1900000>;
-		constant-charge-voltage-max-microvolt = <4350000>;
-		ocv-capacity-celsius = <20>;
-		ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
-					<4022000 85>, <3983000 80>, <3949000 75>,
-					<3917000 70>, <3889000 65>, <3864000 60>,
-					<3835000 55>, <3805000 50>, <3787000 45>,
-					<3777000 40>, <3773000 35>, <3770000 30>,
-					<3765000 25>, <3752000 20>, <3724000 15>,
-					<3680000 10>, <3605000 5>, <3400000 0>;
-		......
-	};
-
-	sc2731_pmic: pmic@0 {
-		compatible = "sprd,sc2731";
-		reg = <0>;
-		spi-max-frequency = <26000000>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fgu@a00 {
-			compatible = "sprd,sc2731-fgu";
-			reg = <0xa00>;
-			battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
-			io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
-			io-channel-names = "bat-temp", "charge-vol";
-			nvmem-cells = <&fgu_calib>;
-			nvmem-cell-names = "fgu_calib";
-			monitored-battery = <&bat>;
-			sprd,calib-resistance-micro-ohms = <21500>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
new file mode 100644
index 000000000000..d90a838a1744
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc2720-fgu
+      - sprd,sc2721-fgu
+      - sprd,sc2723-fgu
+      - sprd,sc2730-fgu
+      - sprd,sc2731-fgu
+
+  reg:
+    maxItems: 1
+
+  battery-detect-gpios:
+    maxItems: 1
+
+  io-channels:
+    items:
+      - description: Battery Temperature ADC
+      - description: Battery Charge Voltage ADC
+
+  io-channel-names:
+    items:
+      - const: bat-temp
+      - const: charge-vol
+
+  nvmem-cells:
+    maxItems: 1
+    description: Calibration cells provided by eFuse device
+
+  nvmem-cell-names:
+    const: fgu_calib
+
+  sprd,calib-resistance-micro-ohms:
+    description: real resistance of coulomb counter chip in micro Ohms
+
+  monitored-battery: true
+
+required:
+  - compatible
+  - reg
+  - battery-detect-gpios
+  - io-channels
+  - io-channel-names
+  - nvmem-cells
+  - nvmem-cell-names
+  - sprd,calib-resistance-micro-ohms
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    bat: battery {
+      compatible = "simple-battery";
+      charge-full-design-microamp-hours = <1900000>;
+      constant-charge-voltage-max-microvolt = <4350000>;
+      ocv-capacity-celsius = <20>;
+      ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
+                             <4022000 85>, <3983000 80>, <3949000 75>,
+                             <3917000 70>, <3889000 65>, <3864000 60>,
+                             <3835000 55>, <3805000 50>, <3787000 45>,
+                             <3777000 40>, <3773000 35>, <3770000 30>,
+                             <3765000 25>, <3752000 20>, <3724000 15>,
+                             <3680000 10>, <3605000 5>, <3400000 0>;
+                             // ...
+    };
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@a00 {
+        compatible = "sprd,sc2731-fgu";
+        reg = <0xa00>;
+        battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+        io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
+        io-channel-names = "bat-temp", "charge-vol";
+        nvmem-cells = <&fgu_calib>;
+        nvmem-cell-names = "fgu_calib";
+        monitored-battery = <&bat>;
+        sprd,calib-resistance-micro-ohms = <21500>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt
new file mode 100644
index 000000000000..ee125cb0e46d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt
@@ -0,0 +1,34 @@
+AB85000 PMIC contains a node, which contains shared
+information about the battery connected to the PMIC.
+The node has no compatible property.
+
+Properties of this node are:
+
+thermistor-on-batctrl:
+	A boolean value indicating thermistor interface	to battery
+
+	Note:
+	'btemp' and 'batctrl' are the pins interfaced for battery temperature
+	measurement, 'btemp' signal is used when NTC(negative temperature
+	coefficient) resister is interfaced external to battery whereas
+	'batctrl' pin is used when NTC resister is internal to battery.
+
+	Example:
+	ab8500_battery: ab8500_battery {
+		thermistor-on-batctrl;
+	};
+	indicates: NTC resister is internal to battery, 'batctrl' is used
+		for thermal measurement.
+
+	The absence of property 'thermal-on-batctrl' indicates
+	NTC resister is external to battery and  'btemp' signal is used
+	for thermal measurement.
+
+battery-type:
+	This shall be the battery manufacturing technology type,
+	allowed types are:
+		"UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn"
+	Example:
+	ab8500_battery: ab8500_battery {
+		stericsson,battery-type = "LIPO";
+	}
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml
new file mode 100644
index 000000000000..525abdfb3e2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-btemp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Battery Temperature Monitor
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-btemp
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  interrupts:
+    maxItems: 5
+
+  interrupt-names:
+    items:
+      - const: BAT_CTRL_INDB
+      - const: BTEMP_LOW
+      - const: BTEMP_HIGH
+      - const: BTEMP_LOW_MEDIUM
+      - const: BTEMP_MEDIUM_HIGH
+
+  io-channels:
+    maxItems: 2
+
+  io-channel-names:
+    items:
+      - const: btemp_ball
+      - const: bat_ctrl
+
+required:
+  - compatible
+  - monitored-battery
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      battery-temperature {
+        compatible = "stericsson,ab8500-btemp";
+        monitored-battery = <&battery>;
+        interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
+                     <80 IRQ_TYPE_LEVEL_HIGH>,
+                     <83 IRQ_TYPE_LEVEL_HIGH>,
+                     <81 IRQ_TYPE_LEVEL_HIGH>,
+                     <82 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "BAT_CTRL_INDB",
+                          "BTEMP_LOW",
+                          "BTEMP_HIGH",
+                          "BTEMP_LOW_MEDIUM",
+                          "BTEMP_MEDIUM_HIGH";
+        io-channels = <&gpadc 0x02>, <&gpadc 0x01>;
+        io-channel-names = "btemp_ball", "bat_ctrl";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml
new file mode 100644
index 000000000000..10bbdcfc87b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-chargalg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Charging Algorithm
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-chargalg
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+required:
+  - compatible
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charging-algorithm {
+        compatible = "stericsson,ab8500-chargalg";
+        monitored-battery = <&ab8500_battery>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
new file mode 100644
index 000000000000..e33329b3af61
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-charger
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  vddadc-supply:
+    description: Supply for USB and Main charger
+
+  autopower_cfg:
+    type: boolean
+    description: automatic poweron after powerloss
+
+  interrupts:
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: MAIN_CH_UNPLUG_DET
+      - const: MAIN_CHARGE_PLUG_DET
+      - const: MAIN_EXT_CH_NOT_OK
+      - const: MAIN_CH_TH_PROT_R
+      - const: MAIN_CH_TH_PROT_F
+      - const: VBUS_DET_F
+      - const: VBUS_DET_R
+      - const: USB_LINK_STATUS
+      - const: USB_CH_TH_PROT_R
+      - const: USB_CH_TH_PROT_F
+      - const: USB_CHARGER_NOT_OKR
+      - const: VBUS_OVV
+      - const: CH_WD_EXP
+      - const: VBUS_CH_DROP_END
+
+  io-channels:
+    minItems: 2
+    maxItems: 4
+
+  io-channel-names:
+    oneOf:
+      - items:
+          - const: main_charger_v
+          - const: main_charger_c
+          - const: vbus_v
+          - const: usb_charger_c
+      - items:
+          - const: vbus_v
+          - const: usb_charger_c
+
+
+required:
+  - compatible
+  - monitored-battery
+  - vddadc-supply
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      charger {
+        compatible = "stericsson,ab8500-charger";
+        monitored-battery = <&battery>;
+        vddadc-supply = <&ab8500_ldo_tvout_reg>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+                     <11 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 IRQ_TYPE_LEVEL_HIGH>,
+                     <107 IRQ_TYPE_LEVEL_HIGH>,
+                     <106 IRQ_TYPE_LEVEL_HIGH>,
+                     <14 IRQ_TYPE_LEVEL_HIGH>,
+                     <15 IRQ_TYPE_LEVEL_HIGH>,
+                     <79 IRQ_TYPE_LEVEL_HIGH>,
+                     <105 IRQ_TYPE_LEVEL_HIGH>,
+                     <104 IRQ_TYPE_LEVEL_HIGH>,
+                     <89 IRQ_TYPE_LEVEL_HIGH>,
+                     <22 IRQ_TYPE_LEVEL_HIGH>,
+                     <21 IRQ_TYPE_LEVEL_HIGH>,
+                     <16 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "MAIN_CH_UNPLUG_DET",
+                          "MAIN_CHARGE_PLUG_DET",
+                          "MAIN_EXT_CH_NOT_OK",
+                          "MAIN_CH_TH_PROT_R",
+                          "MAIN_CH_TH_PROT_F",
+                          "VBUS_DET_F",
+                          "VBUS_DET_R",
+                          "USB_LINK_STATUS",
+                          "USB_CH_TH_PROT_R",
+                          "USB_CH_TH_PROT_F",
+                          "USB_CHARGER_NOT_OKR",
+                          "VBUS_OVV",
+                          "CH_WD_EXP",
+                          "VBUS_CH_DROP_END";
+        io-channels = <&gpadc 0x03>,
+                      <&gpadc 0x0a>,
+                      <&gpadc 0x09>,
+                      <&gpadc 0x0b>;
+        io-channel-names = "main_charger_v",
+                           "main_charger_c",
+                           "vbus_v",
+                           "usb_charger_c";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml
new file mode 100644
index 000000000000..6a724ca90e99
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Fuel Gauge
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-fg
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  line-impedance-micro-ohms:
+    description: The line impedance between the battery and the
+      AB8500 inputs, to compensate for this when determining internal
+      resistance.
+
+  interrupts:
+    maxItems: 5
+
+  interrupt-names:
+    items:
+      - const: NCONV_ACCU
+      - const: BATT_OVV
+      - const: LOW_BAT_F
+      - const: CC_INT_CALIB
+      - const: CCEOC
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    items:
+      - const: main_bat_v
+
+required:
+  - compatible
+  - monitored-battery
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      fuel-gauge {
+        compatible = "stericsson,ab8500-fg";
+        monitored-battery = <&battery>;
+        interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+                     <8 IRQ_TYPE_LEVEL_HIGH>,
+                     <28 IRQ_TYPE_LEVEL_HIGH>,
+                     <27 IRQ_TYPE_LEVEL_HIGH>,
+                     <26 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "NCONV_ACCU",
+                          "BATT_OVV",
+                          "LOW_BAT_F",
+                          "CC_INT_CALIB",
+                          "CCEOC";
+        io-channels = <&gpadc 0x08>;
+        io-channel-names = "main_bat_v";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
new file mode 100644
index 000000000000..2d552becbfe6
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for SMB345, SMB347 and SMB358
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+  - Dmitry Osipenko <digetx@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - summit,smb345
+      - summit,smb347
+      - summit,smb358
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  monitored-battery:
+    description: phandle to the battery node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  summit,enable-usb-charging:
+    type: boolean
+    description: Enable charging through USB.
+
+  summit,enable-otg-charging:
+    type: boolean
+    description: Provide power for USB OTG
+
+  summit,enable-mains-charging:
+    type: boolean
+    description: Enable charging through mains
+
+  summit,enable-charge-control:
+    description: Enable charging control
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_CHG_ENABLE_SW SW (I2C interface)
+      - 1 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW Pin control (Active Low)
+      - 2 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH Pin control (Active High)
+
+  summit,fast-voltage-threshold-microvolt:
+    description: Voltage threshold to transit to fast charge mode (in uV)
+    minimum: 2400000
+    maximum: 3000000
+
+  summit,mains-current-limit-microamp:
+    description: Maximum input current from AC/DC input (in uA)
+
+  summit,usb-current-limit-microamp:
+    description: Maximum input current from USB input (in uA)
+
+  summit,charge-current-compensation-microamp:
+    description: Charge current compensation (in uA)
+
+  summit,chip-temperature-threshold-celsius:
+    description: Chip temperature for thermal regulation in °C.
+    enum: [100, 110, 120, 130]
+
+  summit,soft-compensation-method:
+    description: Soft temperature limit compensation method
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_SOFT_TEMP_COMPENSATE_NONE Compensation none
+      - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation
+      - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation
+
+  summit,inok-polarity:
+    description: |
+      Polarity of INOK signal indicating presence of external power supply.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_SYSOK_INOK_ACTIVE_LOW
+      - 1 # SMB3XX_SYSOK_INOK_ACTIVE_HIGH
+
+  usb-vbus:
+    $ref: /schemas/regulator/regulator.yaml#
+    type: object
+
+    properties:
+      summit,needs-inok-toggle:
+        type: boolean
+        description: INOK signal is fixed and polarity needs to be toggled
+                     in order to enable/disable output mode.
+
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - summit,smb345
+            - summit,smb358
+
+    then:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 1000000,
+                  1500000, 1800000, 2000000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 1000000,
+                  1500000, 1800000, 2000000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [200000, 450000, 600000, 900000]
+
+    else:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 900000, 1200000,
+                  1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 900000, 1200000,
+                  1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [250000, 700000, 900000, 1200000]
+
+required:
+  - compatible
+  - reg
+
+anyOf:
+  - required:
+      - summit,enable-usb-charging
+  - required:
+      - summit,enable-otg-charging
+  - required:
+      - summit,enable-mains-charging
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/summit,smb347-charger.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@7f {
+            compatible = "summit,smb347";
+            reg = <0x7f>;
+
+            summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>;
+            summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>;
+            summit,chip-temperature-threshold-celsius = <110>;
+            summit,mains-current-limit-microamp = <2000000>;
+            summit,usb-current-limit-microamp = <500000>;
+            summit,enable-usb-charging;
+            summit,enable-mains-charging;
+
+            monitored-battery = <&battery>;
+
+            usb-vbus {
+                regulator-name = "usb_vbus";
+                regulator-min-microvolt = <5000000>;
+                regulator-max-microvolt = <5000000>;
+                regulator-min-microamp = <750000>;
+                regulator-max-microamp = <750000>;
+                summit,needs-inok-toggle;
+            };
+        };
+    };
+
+    battery: battery-cell {
+        compatible = "simple-battery";
+        constant-charge-current-max-microamp = <1800000>;
+        operating-range-celsius = <0 45>;
+        alert-celsius = <3 42>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
deleted file mode 100644
index de45e1a2a4d9..000000000000
--- a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-TI BQ24735 Charge Controller
-~~~~~~~~~~
-
-Required properties :
- - compatible : "ti,bq24735"
-
-Optional properties :
- - interrupts : Specify the interrupt to be used to trigger when the AC
-   adapter is either plugged in or removed.
- - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
-   status. This is a Host GPIO that is configured as an input and connected
-   to the ACOK pin on the bq24735. Note: for backwards compatibility reasons,
-   the GPIO must be active on AC adapter absence despite ACOK being active
-   (high) on AC adapter presence.
- - ti,charge-current : Used to control and set the charging current. This value
-   must be between 128mA and 8.128A with a 64mA step resolution. The POR value
-   is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
-   about the ChargeCurrent (0x14h) register.
- - ti,charge-voltage : Used to control and set the charging voltage. This value
-   must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
-   is 0x0000h. This number is in mV (e.g. 19200), see spec for more information
-   about the ChargeVoltage (0x15h) register.
- - ti,input-current : Used to control and set the charger input current. This
-   value must be between 128mA and 8.064A with a 128mA step resolution. The
-   POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for
-   more information about the InputCurrent (0x3fh) register.
- - ti,external-control : Indicates that the charger is configured externally
-   and that the host should not attempt to enable/disable charging or set the
-   charge voltage/current.
- - poll-interval : In case 'interrupts' is not specified, poll AC adapter
-   presence with this interval (milliseconds).
-
-Example:
-
-	bq24735@9 {
-		compatible = "ti,bq24735";
-		reg = <0x9>;
-		ti,ac-detect-gpios = <&gpio 72 0x1>;
-	}
diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
new file mode 100644
index 000000000000..93654e732cda
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ti,lp8727.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI/National Semiconductor LP8727 Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,lp8727
+
+  reg:
+    const: 0x27
+
+  interrupts:
+    maxItems: 1
+
+  debounce-ms:
+    description: interrupt debounce time in ms
+
+patternProperties:
+  '^(ac|usb)$':
+    type: object
+    description: USB/AC charging parameters
+    properties:
+      charger-type:
+        enum:
+          - ac
+          - usb
+
+      eoc-level:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        minimum: 0
+        maximum: 6
+        description: |
+          End of Charge Percentage with the following mapping:
+          0 = 5%, 1 = 10%, 2 = 16%, 3 = 20%, 4 = 25%, 5 = 33%, 6 = 50%
+
+      charging-current:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        minimum: 0
+        maximum: 9
+        description: |
+          Charging current with the following mapping:
+          0 = 90mA, 1 = 100mA, 2 = 400mA, 3 = 450mA, 4 = 500mA, 5 = 600mA,
+          6 = 700mA, 7 = 800mA, 8 = 900mA, 9 = 1000mA
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      lp8727: charger@27 {
+        compatible = "ti,lp8727";
+        reg = <0x27>;
+        interrupt-parent = <&gpio5>;
+        interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+        debounce-ms = <300>;
+
+        /* AC charger: 5% EOC and 500mA charging current */
+        ac {
+          charger-type = "ac";
+          eoc-level = /bits/ 8 <0>;
+          charging-current = /bits/ 8 <4>;
+        };
+
+        /* USB charger: 10% EOC and 400mA charging current */
+        usb {
+          charger-type = "usb";
+          eoc-level = /bits/ 8 <1>;
+          charging-current = /bits/ 8 <2>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml
new file mode 100644
index 000000000000..586745426341
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/tps65090-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65090 Frontend PMU with Switchmode Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,tps65090-charger
+
+  ti,enable-low-current-chrg:
+    type: boolean
+    description: |
+      Enables charging when a low current is detected while the default logic is to stop charging.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "ti,tps65090-charger";
+        ti,enable-low-current-chrg;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/tps65090.txt b/Documentation/devicetree/bindings/power/supply/tps65090.txt
deleted file mode 100644
index 8e5e0d3910df..000000000000
--- a/Documentation/devicetree/bindings/power/supply/tps65090.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-TPS65090 Frontend PMU with Switchmode Charger
-
-Required Properties:
--compatible: "ti,tps65090-charger"
-
-Optional Properties:
--ti,enable-low-current-chrg: Enables charging when a low current is detected
- while the default logic is to stop charging.
-
-This node is a subnode of the tps65090 PMIC.
-
-Example:
-
-	tps65090-charger {
-		compatible = "ti,tps65090-charger";
-		ti,enable-low-current-chrg;
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
new file mode 100644
index 000000000000..7ccf0cdffd3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/tps65217-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65217 Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,tps65217-charger
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: USB
+      - const: AC
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "ti,tps65217-charger";
+        interrupts = <0>, <1>;
+        interrupt-names = "USB", "AC";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
deleted file mode 100644
index a11072c5a866..000000000000
--- a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-TPS65217 Charger
-
-Required Properties:
--compatible: "ti,tps65217-charger"
--interrupts: TPS65217 interrupt numbers for the AC and USB charger input change.
-             Should be <0> for the USB charger and <1> for the AC adapter.
--interrupt-names: Should be "USB" and "AC"
-
-This node is a subnode of the tps65217 PMIC.
-
-Example:
-
-	tps65217-charger {
-		compatible = "ti,tps65217-charger";
-		interrupts = <0>, <1>;
-		interrupt-names = "USB", "AC";
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/twl-charger.txt b/Documentation/devicetree/bindings/power/supply/twl-charger.txt
deleted file mode 100644
index 3b4ea1b73b38..000000000000
--- a/Documentation/devicetree/bindings/power/supply/twl-charger.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-TWL BCI (Battery Charger Interface)
-
-The battery charger needs to interact with the USB phy in order
-to know when charging is permissible, and when there is a connection
-or disconnection.
-
-The choice of phy cannot be configured at a hardware level, so there
-is no value in explicit configuration in device-tree.  Rather
-if there is a sibling of the BCI node which is compatible with
-"ti,twl4030-usb", then that is used to determine when and how
-use USB power for charging.
-
-Required properties:
-- compatible:
-  - "ti,twl4030-bci"
-- interrupts: two interrupt lines from the TWL SIH (secondary
-  interrupt handler) - interrupts 9 and 2.
-
-Optional properties:
-- ti,bb-uvolt: microvolts for charging the backup battery.
-- ti,bb-uamp: microamps for charging the backup battery.
-
-Examples:
-
-bci {
-   compatible = "ti,twl4030-bci";
-   interrupts = <9>, <2>;
-   ti,bb-uvolt = <3200000>;
-   ti,bb-uamp = <150>;
-};
diff --git a/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml
new file mode 100644
index 000000000000..d8d3154f9cb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/twl4030-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TWL4030 BCI (Battery Charger Interface)
+
+description: |
+  The battery charger needs to interact with the USB phy in order to know when
+  charging is permissible, and when there is a connection or disconnection.
+
+  The choice of phy cannot be configured at a hardware level, so there is no
+  value in explicit configuration in device-tree. Rather if there is a sibling
+  of the BCI node which is compatible with "ti,twl4030-usb", then that is used
+  to determine when and how use USB power for charging.
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,twl4030-bci
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  ti,bb-uvolt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: microvolts for charging the backup battery
+
+  ti,bb-uamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: microamps for charging the backup battery
+
+  io-channels:
+    items:
+      - description: Accessory Charger Voltage Channel
+
+  io-channel-names:
+    items:
+      - const: vac
+
+  bci3v1-supply:
+    description: 3.1V USB regulator
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "ti,twl4030-bci";
+        interrupts = <9>, <2>;
+        ti,bb-uvolt = <3200000>;
+        ti,bb-uamp = <150>;
+        io-channels = <&twl_madc 11>;
+        io-channel-names = "vac";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
new file mode 100644
index 000000000000..5c8369fd3ef7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x AC power-supply
+
+description: |
+  The AXP20X can read the current current and voltage supplied by AC by
+  reading ADC channels from the AXP20X ADC. The AXP22X is only able to
+  tell if an AC power supply is present and usable. AXP813/AXP803 are
+  able to limit current and supply voltage
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: x-powers,axp202-ac-power-supply
+      - const: x-powers,axp221-ac-power-supply
+      - items:
+          - const: x-powers,axp803-ac-power-supply
+          - const: x-powers,axp813-ac-power-supply
+      - const: x-powers,axp813-ac-power-supply
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
new file mode 100644
index 000000000000..e0b95ecbbebd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x Battery power-supply
+
+description: |
+  The supported devices can read the battery voltage, charge and discharge
+  currents of the battery by reading ADC channels from the ADC.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: x-powers,axp202-battery-power-supply
+      - const: x-powers,axp209-battery-power-supply
+      - const: x-powers,axp221-battery-power-supply
+      - items:
+          - const: x-powers,axp803-battery-power-supply
+          - const: x-powers,axp813-battery-power-supply
+      - const: x-powers,axp813-battery-power-supply
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
new file mode 100644
index 000000000000..3ce648dd91bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x USB power-supply
+
+description: |
+  The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight
+  variations such as the former being able to set the VBUS power supply max
+  current to 100mA, unlike the latter.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - x-powers,axp202-usb-power-supply
+          - x-powers,axp221-usb-power-supply
+          - x-powers,axp223-usb-power-supply
+          - x-powers,axp813-usb-power-supply
+      - items:
+          - const: x-powers,axp803-usb-power-supply
+          - const: x-powers,axp813-usb-power-supply
+
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt b/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt
deleted file mode 100644
index 781955f5217d..000000000000
--- a/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Freescale PQ3 and QorIQ based Cache SRAM
-
-Freescale's mpc85xx and some QorIQ platforms provide an
-option of configuring a part of (or full) cache memory
-as SRAM. This cache SRAM representation in the device
-tree should be done as under:-
-
-Required properties:
-
-- compatible : should be "fsl,p2020-cache-sram"
-- fsl,cache-sram-ctlr-handle : points to the L2 controller
-- reg : offset and length of the cache-sram.
-
-Example:
-
-cache-sram@fff00000 {
-	fsl,cache-sram-ctlr-handle = <&L2>;
-	reg = <0 0xfff00000 0 0x10000>;
-	compatible = "fsl,p2020-cache-sram";
-};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
index d63ab1dec16d..801c66069121 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
@@ -5,7 +5,7 @@ Copyright 2013 Freescale Semiconductor Inc.
 Power Architecture CPUs in Freescale SOCs are represented in device trees as
 per the definition in the Devicetree Specification.
 
-In addition to the the Devicetree Specification definitions, the properties
+In addition to the Devicetree Specification definitions, the properties
 defined below may be present on CPU nodes.
 
 PROPERTIES
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt
index 8a70696395a7..22ad012660e9 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt
@@ -6,12 +6,6 @@ The cache bindings explained below are Devicetree Specification compliant
 Required Properties:
 
 - compatible	: Should include one of the following:
-		  "fsl,8540-l2-cache-controller"
-		  "fsl,8541-l2-cache-controller"
-		  "fsl,8544-l2-cache-controller"
-		  "fsl,8548-l2-cache-controller"
-		  "fsl,8555-l2-cache-controller"
-		  "fsl,8568-l2-cache-controller"
 		  "fsl,b4420-l2-cache-controller"
 		  "fsl,b4860-l2-cache-controller"
 		  "fsl,bsc9131-l2-cache-controller"
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
index d096cf461d81..4571c857dbe5 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
@@ -172,7 +172,7 @@ Interrupt controller (fsl,mpc5200-pic) node
 The mpc5200 pic binding splits hardware IRQ numbers into two levels.  The
 split reflects the layout of the PIC hardware itself, which groups
 interrupts into one of three groups; CRIT, MAIN or PERP.  Also, the
-Bestcomm dma engine has it's own set of interrupt sources which are
+Bestcomm dma engine has its own set of interrupt sources which are
 cascaded off of peripheral interrupt 0, which the driver interprets as a
 fourth group, SDMA.
 
diff --git a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
index 9d619e955576..d6658d3dd15e 100644
--- a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
+++ b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
@@ -39,7 +39,7 @@ otherwise. The length of all the property arrays must be the same.
 
 - ibm,cpu-idle-state-flags:
 	Array of unsigned 32-bit values containing the values of the
-	flags associated with the the aforementioned idle-states. The
+	flags associated with the aforementioned idle-states. The
 	flag bits are as follows:
 		0x00000001 /* Decrementer would stop */
 		0x00000002 /* Needs timebase restore */
diff --git a/Documentation/devicetree/bindings/powerpc/sleep.yaml b/Documentation/devicetree/bindings/powerpc/sleep.yaml
new file mode 100644
index 000000000000..1b0936a5beec
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/sleep.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/powerpc/sleep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerPC sleep property
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |
+  Devices on SOCs often have mechanisms for placing devices into low-power
+  states that are decoupled from the devices' own register blocks.  Sometimes,
+  this information is more complicated than a cell-index property can
+  reasonably describe.  Thus, each device controlled in such a manner
+  may contain a "sleep" property which describes these connections.
+
+  The sleep property consists of one or more sleep resources, each of
+  which consists of a phandle to a sleep controller, followed by a
+  controller-specific sleep specifier of zero or more cells.
+
+  The semantics of what type of low power modes are possible are defined
+  by the sleep controller.  Some examples of the types of low power modes
+  that may be supported are:
+
+   - Dynamic: The device may be disabled or enabled at any time.
+   - System Suspend: The device may request to be disabled or remain
+     awake during system suspend, but will not be disabled until then.
+   - Permanent: The device is disabled permanently (until the next hard
+     reset).
+
+  Some devices may share a clock domain with each other, such that they should
+  only be suspended when none of the devices are in use.  Where reasonable,
+  such nodes should be placed on a virtual bus, where the bus has the sleep
+  property.  If the clock domain is shared among devices that cannot be
+  reasonably grouped in this manner, then create a virtual sleep controller
+  (similar to an interrupt nexus, except that defining a standardized
+  sleep-map should wait until its necessity is demonstrated).
+
+select: true
+
+properties:
+  sleep:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt
deleted file mode 100644
index e9b8360b3288..000000000000
--- a/Documentation/devicetree/bindings/property-units.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Standard Unit Suffixes for Property names
-
-Properties which have a unit of measure are recommended to have a unit
-suffix appended to the property name. The list below contains the
-recommended suffixes. Other variations exist in bindings, but should not
-be used in new bindings or added here. The inconsistency in the unit
-prefixes is due to selecting the most commonly used variants.
-
-It is also recommended to use the units listed here and not add additional
-unit prefixes.
-
-Time/Frequency
-----------------------------------------
--mhz		: megahertz
--hz		: hertz (preferred)
--sec		: second
--ms		: millisecond
--us		: microsecond
--ns		: nanosecond
-
-Distance
-----------------------------------------
--mm		: millimeter
-
-Electricity
-----------------------------------------
--microamp	: microampere
--microamp-hours : microampere hour
--ohms		: ohm
--micro-ohms	: microohm
--microwatt-hours: microwatt hour
--microvolt	: microvolt
--picofarads	: picofarad
--femtofarads	: femtofarad
-
-Temperature
-----------------------------------------
--celsius	: degree Celsius
--millicelsius	: millidegree Celsius
-
-Pressure
-----------------------------------------
--kpascal	: kilopascal
diff --git a/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml b/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml
new file mode 100644
index 000000000000..51381e4cbb1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ptp/ptp-idt82p33.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT 82P33 PTP Clock
+
+description: |
+  IDT 82P33XXX Synchronization Management Unit (SMU) based PTP clock
+
+maintainers:
+  - Min Li <min.li.xe@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - idt,82p33810
+      - idt,82p33813
+      - idt,82p33814
+      - idt,82p33831
+      - idt,82p33910
+      - idt,82p33913
+      - idt,82p33914
+      - idt,82p33931
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phc@51 {
+            compatible = "idt,82p33810";
+            reg = <0x51>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
index 9e21b83d717e..7cf32663c806 100644
--- a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
+++ b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ptp/ptp-idtcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: IDT ClockMatrix (TM) PTP Clock Device Tree Bindings
+title: IDT ClockMatrix (TM) PTP Clock
 
 maintainers:
   - Vincent Cheng <vincent.cheng.xh@renesas.com>
@@ -55,11 +55,11 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
-    i2c@1 {
-        compatible = "abc,acme-1234";
-        reg = <0x01 0x400>;
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
         phc@5b {
diff --git a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
index d48f9eb3636e..743eda754e65 100644
--- a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
+++ b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
@@ -18,6 +18,8 @@ Clock Properties:
   - fsl,tmr-add      Frequency compensation value.
   - fsl,tmr-fiper1   Fixed interval period pulse generator.
   - fsl,tmr-fiper2   Fixed interval period pulse generator.
+  - fsl,tmr-fiper3   Fixed interval period pulse generator.
+                     Supported only on DPAA2 and ENETC hardware.
   - fsl,max-adj      Maximum frequency adjustment in parts per billion.
   - fsl,extts-fifo   The presence of this property indicates hardware
 		     support for the external trigger stamp FIFO.
diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
index 7dcab2bf8128..4cc3cc7c50be 100644
--- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pwm/allwinner,sun4i-a10-pwm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 PWM Device Tree Bindings
+title: Allwinner A10 PWM
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -25,6 +25,9 @@ properties:
           - const: allwinner,sun8i-a83t-pwm
           - const: allwinner,sun8i-h3-pwm
       - items:
+          - const: allwinner,sun8i-v3s-pwm
+          - const: allwinner,sun7i-a20-pwm
+      - items:
           - const: allwinner,sun50i-a64-pwm
           - const: allwinner,sun5i-a13-pwm
       - items:
@@ -37,7 +40,6 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: Module Clock
       - description: Bus Clock
@@ -50,33 +52,36 @@ properties:
   resets:
     maxItems: 1
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: allwinner,sun50i-h6-pwm
 
-then:
-  properties:
-    clocks:
-      maxItems: 2
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-h6-pwm
+
+    then:
+      properties:
+        clocks:
+          maxItems: 2
 
-    clock-names:
-      items:
-        - const: mod
-        - const: bus
+        clock-names:
+          items:
+            - const: mod
+            - const: bus
 
-  required:
-    - clock-names
-    - resets
+      required:
+        - clock-names
+        - resets
 
-else:
-  properties:
-    clocks:
-      maxItems: 1
+    else:
+      properties:
+        clocks:
+          maxItems: 1
 
 required:
-  - "#pwm-cells"
   - compatible
   - reg
   - clocks
diff --git a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml
new file mode 100644
index 000000000000..ab45df80345d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/atmel,at91sam-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel/Microchip PWM controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+allOf:
+  - $ref: "pwm.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91sam9rl-pwm
+              - atmel,sama5d3-pwm
+              - atmel,sama5d2-pwm
+              - microchip,sam9x60-pwm
+      - items:
+          - const: microchip,sama7g5-pwm
+          - const: atmel,sama5d2-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pwm0: pwm@f8034000 {
+        compatible = "atmel,at91sam9rl-pwm";
+        reg = <0xf8034000 0x400>;
+        #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
deleted file mode 100644
index fbb5325be1f0..000000000000
--- a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Atmel PWM controller
-
-Required properties:
-  - compatible: should be one of:
-    - "atmel,at91sam9rl-pwm"
-    - "atmel,sama5d3-pwm"
-    - "atmel,sama5d2-pwm"
-    - "microchip,sam9x60-pwm"
-  - reg: physical base address and length of the controller's registers
-  - #pwm-cells: Should be 3. See pwm.yaml in this directory for a
-    description of the cells format.
-
-Example:
-
-	pwm0: pwm@f8034000 {
-		compatible = "atmel,at91sam9rl-pwm";
-		reg = <0xf8034000 0x400>;
-		#pwm-cells = <3>;
-	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		d1 {
-			label = "d1";
-			pwms = <&pwm0 3 5000 0>
-			max-brightness = <255>;
-		};
-
-		d2 {
-			label = "d2";
-			pwms = <&pwm0 1 5000 1>
-			max-brightness = <255>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt
deleted file mode 100644
index 985fcc65f8c4..000000000000
--- a/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Atmel TCB PWM controller
-
-Required properties:
-- compatible: should be "atmel,tcb-pwm"
-- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of
-  the cells format. The only third cell flag supported by this binding is
-  PWM_POLARITY_INVERTED.
-- tc-block: The Timer Counter block to use as a PWM chip.
-
-Example:
-
-pwm {
-	compatible = "atmel,tcb-pwm";
-	#pwm-cells = <3>;
-	tc-block = <1>;
-};
diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt
deleted file mode 100644
index 0e662d7f6bd1..000000000000
--- a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Broadcom BCM7038 PWM controller (BCM7xxx Set Top Box PWM controller)
-
-Required properties:
-
-- compatible: must be "brcm,bcm7038-pwm"
-- reg: physical base address and length for this controller
-- #pwm-cells: should be 2. See pwm.yaml in this directory for a description
-  of the cells format
-- clocks: a phandle to the reference clock for this block which is fed through
-  its internal variable clock frequency generator
-
-
-Example:
-
-	pwm: pwm@f0408000 {
-		compatible = "brcm,bcm7038-pwm";
-		reg = <0xf0408000 0x28>;
-		#pwm-cells = <2>;
-		clocks = <&upg_fixed>;
-	};
diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
new file mode 100644
index 000000000000..119de3d7f9dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/brcm,bcm7038-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7038 PWM controller (BCM7xxx Set Top Box PWM controller)
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm7038-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm: pwm@f0408000 {
+       compatible = "brcm,bcm7038-pwm";
+       reg = <0xf0408000 0x28>;
+       #pwm-cells = <2>;
+       clocks = <&upg_fixed>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt
deleted file mode 100644
index 655f6cd4ef46..000000000000
--- a/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Broadcom iProc PWM controller device tree bindings
-
-This controller has 4 channels.
-
-Required Properties :
-- compatible: must be "brcm,iproc-pwm"
-- reg: physical base address and length of the controller's registers
-- clocks: phandle + clock specifier pair for the external clock
-- #pwm-cells: Should be 3. See pwm.yaml in this directory for a
-  description of the cells format.
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
-
-pwm: pwm@18031000 {
-	compatible = "brcm,iproc-pwm";
-	reg = <0x18031000 0x28>;
-	clocks = <&osc>;
-	#pwm-cells = <3>;
-};
diff --git a/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.yaml
new file mode 100644
index 000000000000..218ab06c34d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/brcm,iproc-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc PWM controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+  This controller has 4 channels.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: brcm,iproc-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: external clock
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - clocks
+
+examples:
+  - |
+    pwm@18031000 {
+        compatible = "brcm,iproc-pwm";
+        reg = <0x18031000 0x28>;
+        clocks = <&osc>;
+        #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/clk-pwm.yaml b/Documentation/devicetree/bindings/pwm/clk-pwm.yaml
new file mode 100644
index 000000000000..ec1768291503
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/clk-pwm.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/clk-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock based PWM controller
+
+maintainers:
+  - Nikita Travkin <nikita@trvn.ru>
+
+description: |
+  Some systems have clocks that can be exposed to external devices.
+  (e.g. by muxing them to GPIO pins)
+  It's often possible to control duty-cycle of such clocks which makes them
+  suitable for generating PWM signal.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: clk-pwm
+
+  clocks:
+    description: Clock used to generate the signal.
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - clocks
+
+examples:
+  - |
+    pwm {
+      compatible = "clk-pwm";
+      #pwm-cells = <2>;
+      clocks = <&gcc 0>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pwm_clk_flash_default>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.txt b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.txt
deleted file mode 100644
index 472bd46ab5a4..000000000000
--- a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* PWM controlled by ChromeOS EC
-
-Google's ChromeOS EC PWM is a simple PWM attached to the Embedded Controller
-(EC) and controlled via a host-command interface.
-
-An EC PWM node should be only found as a sub-node of the EC node (see
-Documentation/devicetree/bindings/mfd/cros-ec.txt).
-
-Required properties:
-- compatible: Must contain "google,cros-ec-pwm"
-- #pwm-cells: Should be 1. The cell specifies the PWM index.
-
-Example:
-	cros-ec@0 {
-		compatible = "google,cros-ec-spi";
-
-		...
-
-		cros_ec_pwm: ec-pwm {
-			compatible = "google,cros-ec-pwm";
-			#pwm-cells = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
new file mode 100644
index 000000000000..c8577bdf6c94
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/google,cros-ec-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM controlled by ChromeOS EC
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - '"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>'
+
+description: |
+  Google's ChromeOS EC PWM is a simple PWM attached to the Embedded Controller
+  (EC) and controlled via a host-command interface.
+  An EC PWM node should be only found as a sub-node of the EC node (see
+  Documentation/devicetree/bindings/mfd/google,cros-ec.yaml).
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: PWM controlled using EC_PWM_TYPE_GENERIC channels.
+        items:
+          - const: google,cros-ec-pwm
+      - description: PWM controlled using CROS_EC_PWM_DT_<...> types.
+        items:
+          - const: google,cros-ec-pwm-type
+
+  "#pwm-cells":
+    description: The cell specifies the PWM index.
+    const: 1
+
+required:
+  - compatible
+  - '#pwm-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+
+            cros_ec_pwm: pwm {
+                compatible = "google,cros-ec-pwm";
+                #pwm-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt
deleted file mode 100644
index 22f1c3d8b773..000000000000
--- a/Documentation/devicetree/bindings/pwm/imx-pwm.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Freescale i.MX PWM controller
-
-Required properties:
-- compatible : should be "fsl,<soc>-pwm" and one of the following
-   compatible strings:
-  - "fsl,imx1-pwm" for PWM compatible with the one integrated on i.MX1
-  - "fsl,imx27-pwm" for PWM compatible with the one integrated on i.MX27
-- reg: physical base address and length of the controller's registers
-- #pwm-cells: 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.yaml
-  in this directory for a description of the cells format.
-- clocks : Clock specifiers for both ipg and per clocks.
-- clock-names : Clock names should include both "ipg" and "per"
-See the clock consumer binding,
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
-- interrupts: The interrupt for the pwm controller
-
-Example:
-
-pwm1: pwm@53fb4000 {
-	#pwm-cells = <3>;
-	compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
-	reg = <0x53fb4000 0x4000>;
-	clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-		 <&clks IMX5_CLK_PWM1_HF_GATE>;
-	clock-names = "ipg", "per";
-	interrupts = <61>;
-};
diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
new file mode 100644
index 000000000000..b3da4e629341
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/imx-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX PWM controller
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  "#pwm-cells":
+    description: |
+      Should be 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.yaml
+      in this directory for a description of the cells format.
+    enum:
+      - 2
+      - 3
+
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx1-pwm
+          - fsl,imx27-pwm
+      - items:
+          - enum:
+              - fsl,imx25-pwm
+              - fsl,imx31-pwm
+              - fsl,imx50-pwm
+              - fsl,imx51-pwm
+              - fsl,imx53-pwm
+              - fsl,imx6q-pwm
+              - fsl,imx6sl-pwm
+              - fsl,imx6sll-pwm
+              - fsl,imx6sx-pwm
+              - fsl,imx6ul-pwm
+              - fsl,imx7d-pwm
+              - fsl,imx8mm-pwm
+              - fsl,imx8mn-pwm
+              - fsl,imx8mp-pwm
+              - fsl,imx8mq-pwm
+          - const: fsl,imx27-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC PWM ipg clock
+      - description: SoC PWM per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    pwm@53fb4000 {
+        #pwm-cells = <3>;
+        compatible = "fsl,imx27-pwm";
+        reg = <0x53fb4000 0x4000>;
+        clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+                 <&clks IMX5_CLK_PWM1_HF_GATE>;
+        clock-names = "ipg", "per";
+        interrupts = <61>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt
deleted file mode 100644
index 5bf20950a24e..000000000000
--- a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Freescale i.MX TPM PWM controller
-
-Required properties:
-- compatible : Should be "fsl,imx7ulp-pwm".
-- reg: Physical base address and length of the controller's registers.
-- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format.
-- clocks : The clock provided by the SoC to drive the PWM.
-- interrupts: The interrupt for the PWM controller.
-
-Note: The TPM counter and period counter are shared between multiple channels, so all channels
-should use same period setting.
-
-Example:
-
-tpm4: pwm@40250000 {
-	compatible = "fsl,imx7ulp-pwm";
-	reg = <0x40250000 0x1000>;
-	assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
-	assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
-	clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
-	#pwm-cells = <3>;
-};
diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml
new file mode 100644
index 000000000000..8bef9dfeba9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/imx-tpm-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX TPM PWM controller
+
+maintainers:
+  - Anson Huang <anson.huang@nxp.com>
+
+description: |
+  The TPM counter and period counter are shared between multiple
+  channels, so all channels should use same period setting.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  "#pwm-cells":
+    const: 3
+
+  compatible:
+    enum:
+      - fsl,imx7ulp-pwm
+
+  reg:
+    maxItems: 1
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+
+    pwm@40250000 {
+        compatible = "fsl,imx7ulp-pwm";
+        reg = <0x40250000 0x1000>;
+        assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
+        assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
+        clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
+        #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml b/Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml
new file mode 100644
index 000000000000..5b18a5913ed1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/intel,keembay-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay PWM
+
+maintainers:
+  - Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    enum:
+      - intel,keembay-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #define KEEM_BAY_A53_GPIO
+
+    pwm@203200a0 {
+        compatible = "intel,keembay-pwm";
+        reg = <0x203200a0 0xe8>;
+        clocks = <&scmi_clk KEEM_BAY_A53_GPIO>;
+        #pwm-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml b/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml
new file mode 100644
index 000000000000..59d7c4d864c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/intel,lgm-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LGM SoC PWM fan controller
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: intel,lgm-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm: pwm@e0d00000 {
+        compatible = "intel,lgm-pwm";
+        reg = <0xe0d00000 0x30>;
+        #pwm-cells = <2>;
+        clocks = <&cgu0 126>;
+        resets = <&rcu0 0x30 21>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml
new file mode 100644
index 000000000000..0a46af240d83
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/iqs620a-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A PWM Generator
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS620A multi-function sensor generates a fixed-frequency PWM
+  output represented by a "pwm" child node from the parent MFD driver. See
+  Documentation/devicetree/bindings/mfd/iqs62x.yaml for further details as
+  well as an example.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs620a-pwm
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
new file mode 100644
index 000000000000..981cfec53f37
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/kontron,sl28cpld-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+  The controller supports one PWM channel and supports only four distinct
+  frequencies (250Hz, 500Hz, 1kHz, 2kHz).
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: kontron,sl28cpld-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
new file mode 100644
index 000000000000..0088bc8e7c54
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DISP_PWM Controller
+
+maintainers:
+  - Jitao Shi <jitao.shi@mediatek.com>
+  - Xinlei Lee <xinlei.lee@mediatek.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-disp-pwm
+          - mediatek,mt6595-disp-pwm
+          - mediatek,mt8173-disp-pwm
+          - mediatek,mt8183-disp-pwm
+      - items:
+          - const: mediatek,mt8167-disp-pwm
+          - const: mediatek,mt8173-disp-pwm
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-pwm
+              - mediatek,mt8188-disp-pwm
+              - mediatek,mt8192-disp-pwm
+              - mediatek,mt8195-disp-pwm
+          - const: mediatek,mt8183-disp-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main Clock
+      - description: Mm Clock
+
+  clock-names:
+    items:
+      - const: main
+      - const: mm
+
+required:
+  - compatible
+  - reg
+  - "#pwm-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pwm0: pwm@1401e000 {
+        compatible = "mediatek,mt8173-disp-pwm";
+        reg = <0x1401e000 0x1000>;
+        #pwm-cells = <2>;
+        clocks = <&mmsys CLK_MM_DISP_PWM026M>,
+                 <&mmsys CLK_MM_DISP_PWM0MM>;
+        clock-names = "main", "mm";
+    };
diff --git a/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
new file mode 100644
index 000000000000..a7fae1772a81
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/microchip,corepwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip IP corePWM controller bindings
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  corePWM is an 16 channel pulse width modulator FPGA IP
+
+  https://www.microsemi.com/existing-parts/parts/152118
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: microchip,corepwm-rtl-v4
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  microchip,sync-update-mask:
+    description: |
+      Depending on how the IP is instantiated, there are two modes of operation.
+      In synchronous mode, all channels are updated at the beginning of the PWM period,
+      and in asynchronous mode updates happen as the control registers are written.
+      A 16 bit wide "SHADOW_REG_EN" parameter of the IP core controls whether synchronous
+      mode is possible for each channel, and is set by the bitstream programmed to the
+      FPGA. If the IP core is instantiated with SHADOW_REG_ENx=1, both registers that
+      control the duty cycle for channel x have a second "shadow"/buffer reg synthesised.
+      At runtime a bit wide register exposed to APB can be used to toggle on/off
+      synchronised mode for all channels it has been synthesised for.
+      Each bit of "microchip,sync-update-mask" corresponds to a PWM channel & represents
+      whether synchronous mode is possible for the PWM channel.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  microchip,dac-mode-mask:
+    description: |
+      Optional, per-channel Low Ripple DAC mode is possible on this IP core. It creates
+      a minimum period pulse train whose High/Low average is that of the chosen duty
+      cycle. This "DAC" will have far better bandwidth and ripple performance than the
+      standard PWM algorithm can achieve. A 16 bit DAC_MODE module parameter of the IP
+      core, set at instantiation and by the bitstream programmed to the FPGA, determines
+      whether a given channel operates in regular PWM or DAC mode.
+      Each bit corresponds to a PWM channel & represents whether DAC mode is enabled
+      for that channel.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@41000000 {
+      compatible = "microchip,corepwm-rtl-v4";
+      microchip,sync-update-mask = /bits/ 32 <0>;
+      clocks = <&clkcfg 30>;
+      reg = <0x41000000 0xF0>;
+      #pwm-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt
deleted file mode 100644
index a1b8a482f873..000000000000
--- a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Freescale MXS PWM controller
-
-Required properties:
-- compatible: should be "fsl,imx23-pwm"
-- reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of
-  the cells format.
-- fsl,pwm-number: the number of PWM devices
-
-Example:
-
-pwm: pwm@80064000 {
-	compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
-	reg = <0x80064000 0x2000>;
-	#pwm-cells = <3>;
-	fsl,pwm-number = <8>;
-};
diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
new file mode 100644
index 000000000000..a34cbc13f691
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/mxs-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS PWM controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Anson Huang <anson.huang@nxp.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+  fsl,pwm-number:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the number of PWM devices
+
+required:
+  - compatible
+  - reg
+  - fsl,pwm-number
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@80064000 {
+        compatible = "fsl,imx23-pwm";
+        reg = <0x80064000 0x2000>;
+        #pwm-cells = <3>;
+        fsl,pwm-number = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
index 0a69eadf44ce..74c41e34c3b6 100644
--- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
@@ -9,6 +9,7 @@ Required properties:
   - "nvidia,tegra132-pwm", "nvidia,tegra20-pwm": for Tegra132
   - "nvidia,tegra210-pwm", "nvidia,tegra20-pwm": for Tegra210
   - "nvidia,tegra186-pwm": for Tegra186
+  - "nvidia,tegra194-pwm": for Tegra194
 - reg: physical base address and length of the controller's registers
 - #pwm-cells: should be 2. See pwm.yaml in this directory for a description of
   the cells format.
diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
index 95536d83c5f2..554c96b6d0c3 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
@@ -3,10 +3,14 @@ MediaTek PWM controller
 Required properties:
  - compatible: should be "mediatek,<name>-pwm":
    - "mediatek,mt2712-pwm": found on mt2712 SoC.
+   - "mediatek,mt6795-pwm": found on mt6795 SoC.
    - "mediatek,mt7622-pwm": found on mt7622 SoC.
    - "mediatek,mt7623-pwm": found on mt7623 SoC.
    - "mediatek,mt7628-pwm": found on mt7628 SoC.
    - "mediatek,mt7629-pwm": found on mt7629 SoC.
+   - "mediatek,mt8183-pwm": found on mt8183 SoC.
+   - "mediatek,mt8195-pwm", "mediatek,mt8183-pwm": found on mt8195 SoC.
+   - "mediatek,mt8365-pwm": found on mt8365 SoC.
    - "mediatek,mt8516-pwm": found on mt8516 SoC.
  - reg: physical base address and length of the controller's registers.
  - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of
@@ -16,13 +20,19 @@ Required properties:
                 has no clocks
    - "top": the top clock generator
    - "main": clock used by the PWM core
+   - "pwm1-3": the three per PWM clocks for mt8365
    - "pwm1-8": the eight per PWM clocks for mt2712
    - "pwm1-6": the six per PWM clocks for mt7622
    - "pwm1-5": the five per PWM clocks for mt7623
+   - "pwm1"  : the PWM1 clock for mt7629
  - pinctrl-names: Must contain a "default" entry.
  - pinctrl-0: One property must exist for each entry in pinctrl-names.
    See pinctrl/pinctrl-bindings.txt for details of the property values.
 
+Optional properties:
+- assigned-clocks: Reference to the PWM clock entries.
+- assigned-clock-parents: The phandle of the parent clock of PWM clock.
+
 Example:
 	pwm0: pwm@11006000 {
 		compatible = "mediatek,mt7623-pwm";
diff --git a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
deleted file mode 100644
index 0521957c253f..000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-MediaTek display PWM controller
-
-Required properties:
- - compatible: should be "mediatek,<name>-disp-pwm":
-   - "mediatek,mt2701-disp-pwm": found on mt2701 SoC.
-   - "mediatek,mt6595-disp-pwm": found on mt6595 SoC.
-   - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
- - reg: physical base address and length of the controller's registers.
- - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of
-   the cell format.
- - clocks: phandle and clock specifier of the PWM reference clock.
- - clock-names: must contain the following:
-   - "main": clock used to generate PWM signals.
-   - "mm": sync signals from the modules of mmsys.
- - pinctrl-names: Must contain a "default" entry.
- - pinctrl-0: One property must exist for each entry in pinctrl-names.
-   See pinctrl/pinctrl-bindings.txt for details of the property values.
-
-Example:
-	pwm0: pwm@1401e000 {
-		compatible = "mediatek,mt8173-disp-pwm",
-			     "mediatek,mt6595-disp-pwm";
-		reg = <0 0x1401e000 0 0x1000>;
-		#pwm-cells = <2>;
-		clocks = <&mmsys CLK_MM_DISP_PWM026M>,
-			 <&mmsys CLK_MM_DISP_PWM0MM>;
-		clock-names = "main", "mm";
-		pinctrl-names = "default";
-		pinctrl-0 = <&disp_pwm0_pins>;
-	};
-
-	backlight_lcd: backlight_lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm0 0 1000000>;
-		brightness-levels = <
-			  0  16  32  48  64  80  96 112
-			128 144 160 176 192 208 224 240
-			255
-		>;
-		default-brightness-level = <9>;
-		power-supply = <&mt6397_vio18_reg>;
-		enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
index d722ae3be363..25ecfe14c698 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
@@ -2,7 +2,7 @@
 
 Required properties:
 - compatible: Shall contain "ti,omap-dmtimer-pwm".
-- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer.txt for info
+- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer-dm.yaml for info
   about these timers.
 - #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
   the cells format.
diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt
deleted file mode 100644
index f70956dea77b..000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Rockchip PWM controller
-
-Required properties:
- - compatible: should be "rockchip,<name>-pwm"
-   "rockchip,rk2928-pwm": found on RK29XX,RK3066 and RK3188 SoCs
-   "rockchip,rk3288-pwm": found on RK3288 SOC
-   "rockchip,rv1108-pwm", "rockchip,rk3288-pwm": found on RV1108 SoC
-   "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC
- - reg: physical base address and length of the controller's registers
- - clocks: See ../clock/clock-bindings.txt
-   - For older hardware (rk2928, rk3066, rk3188, rk3228, rk3288, rk3399):
-     - There is one clock that's used both to derive the functional clock
-       for the device and as the bus clock.
-   - For newer hardware (rk3328 and future socs): specified by name
-     - "pwm": This is used to derive the functional clock.
-     - "pclk": This is the APB bus clock.
- - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.yaml in this directory
-   for a description of the cell format.
-
-Example:
-
-	pwm0: pwm@20030000 {
-		compatible = "rockchip,rk2928-pwm";
-		reg = <0x20030000 0x10>;
-		clocks = <&cru PCLK_PWM01>;
-		#pwm-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
new file mode 100644
index 000000000000..f2d1dc7e7b3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-rockchip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PWM controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk2928-pwm
+      - const: rockchip,rk3288-pwm
+      - const: rockchip,rk3328-pwm
+      - const: rockchip,vop-pwm
+      - items:
+          - const: rockchip,rk3036-pwm
+          - const: rockchip,rk2928-pwm
+      - items:
+          - enum:
+              - rockchip,rk3128-pwm
+              - rockchip,rk3368-pwm
+              - rockchip,rk3399-pwm
+              - rockchip,rv1108-pwm
+          - const: rockchip,rk3288-pwm
+      - items:
+          - enum:
+              - rockchip,px30-pwm
+              - rockchip,rk3308-pwm
+              - rockchip,rk3568-pwm
+              - rockchip,rk3588-pwm
+          - const: rockchip,rk3328-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  "#pwm-cells":
+    enum: [2, 3]
+    description:
+      Must be 2 (rk2928) or 3 (rk3288 and later).
+      See pwm.yaml for a description of the cell format.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3328-pwm
+              - rockchip,rv1108-pwm
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Used to derive the functional clock for the device.
+            - description: Used as the APB bus clock.
+
+        clock-names:
+          items:
+            - const: pwm
+            - const: pclk
+
+      required:
+        - clocks
+        - clock-names
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+          description:
+            Used both to derive the functional clock
+            for the device and as the bus clock.
+
+      required:
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    pwm0: pwm@20030000 {
+      compatible = "rockchip,rk2928-pwm";
+      reg = <0x20030000 0x10>;
+      clocks = <&cru PCLK_PWM01>;
+      #pwm-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
index ea7f32905172..fe603fb1b2cc 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
+++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
@@ -18,9 +18,6 @@ description: |+
 
   Be aware that the clocksource driver supports only uniprocessor systems.
 
-allOf:
-  - $ref: pwm.yaml#
-
 properties:
   compatible:
     enum:
@@ -49,21 +46,22 @@ properties:
       are available.
     oneOf:
       - items:
-        - const: timers
+          - const: timers
       - items:
-        - const: timers
-        - const: pwm-tclk0
+          - const: timers
+          - const: pwm-tclk0
       - items:
-        - const: timers
-        - const: pwm-tclk1
+          - const: timers
+          - const: pwm-tclk1
       - items:
-        - const: timers
-        - const: pwm-tclk0
-        - const: pwm-tclk1
+          - const: timers
+          - const: pwm-tclk0
+          - const: pwm-tclk1
 
   interrupts:
     description:
-      One interrupt per timer, starting at timer 0.
+      One interrupt per timer, starting at timer 0. Necessary only for SoCs which
+      use PWM clocksource.
     minItems: 1
     maxItems: 5
 
@@ -78,23 +76,36 @@ properties:
       A list of PWM channels used as PWM outputs on particular platform.
       It is an array of up to 5 elements being indices of PWM channels
       (from 0 to 4), the order does not matter.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - uniqueItems: true
-      - items:
-          minimum: 0
-          maximum: 4
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    uniqueItems: true
+    items:
+      minimum: 0
+      maximum: 4
 
 required:
   - clocks
   - clock-names
   - compatible
-  - interrupts
-  - "#pwm-cells"
   - reg
 
 additionalProperties: false
 
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-pwm
+              - samsung,s3c6400-pwm
+              - samsung,s5p6440-pwm
+              - samsung,s5pc100-pwm
+    then:
+      required:
+        - interrupts
+
 examples:
   - |
     pwm@7f006000 {
diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.txt b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt
deleted file mode 100644
index 3d1dd7b06efc..000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-sifive.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-SiFive PWM controller
-
-Unlike most other PWM controllers, the SiFive PWM controller currently only
-supports one period for all channels in the PWM. All PWMs need to run at
-the same period. The period also has significant restrictions on the values
-it can achieve, which the driver rounds to the nearest achievable period.
-PWM RTL that corresponds to the IP block version numbers can be found
-here:
-
-https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm
-
-Required properties:
-- compatible: Should be "sifive,<chip>-pwm" and "sifive,pwm<version>".
-  Supported compatible strings are: "sifive,fu540-c000-pwm" for the SiFive
-  PWM v0 as integrated onto the SiFive FU540 chip, and "sifive,pwm0" for the
-  SiFive PWM v0 IP block with no chip integration tweaks.
-  Please refer to sifive-blocks-ip-versioning.txt for details.
-- reg: physical base address and length of the controller's registers
-- clocks: Should contain a clock identifier for the PWM's parent clock.
-- #pwm-cells: Should be 3. See pwm.yaml in this directory
-  for a description of the cell format.
-- interrupts: one interrupt per PWM channel
-
-Examples:
-
-pwm:  pwm@10020000 {
-	compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
-	reg = <0x0 0x10020000 0x0 0x1000>;
-	clocks = <&tlclk>;
-	interrupt-parent = <&plic>;
-	interrupts = <42 43 44 45>;
-	#pwm-cells = <3>;
-};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml
new file mode 100644
index 000000000000..605c1766dba8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-sifive.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive PWM controller
+
+maintainers:
+  - Sagar Kadam <sagar.kadam@sifive.com>
+  - Paul Walmsley <paul.walmsley@sifive.com>
+
+description:
+  Unlike most other PWM controllers, the SiFive PWM controller currently
+  only supports one period for all channels in the PWM. All PWMs need to
+  run at the same period. The period also has significant restrictions on
+  the values it can achieve, which the driver rounds to the nearest
+  achievable period. PWM RTL that corresponds to the IP block version
+  numbers can be found here -
+
+  https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sifive,fu540-c000-pwm
+          - sifive,fu740-c000-pwm
+      - const: sifive,pwm0
+    description:
+      Should be "sifive,<chip>-pwm" and "sifive,pwm<version>". Supported
+      compatible strings are "sifive,fu540-c000-pwm" and
+      "sifive,fu740-c000-pwm" for the SiFive PWM v0 as integrated onto the
+      SiFive FU540 and FU740 chip respectively, and "sifive,pwm0" for the
+      SiFive PWM v0 IP block with no chip integration tweaks.
+      Please refer to sifive-blocks-ip-versioning.txt for details.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+  interrupts:
+    maxItems: 4
+    description:
+      Each PWM instance in FU540-C000 has 4 comparators. One interrupt per comparator.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm:  pwm@10020000 {
+      compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
+      reg = <0x10020000 0x1000>;
+      clocks = <&tlclk>;
+      interrupt-parent = <&plic>;
+      interrupts = <42>, <43>, <44>, <45>;
+      #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
deleted file mode 100644
index c7c4347a769a..000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-TI SOC ECAP based APWM controller
-
-Required properties:
-- compatible: Must be "ti,<soc>-ecap".
-  for am33xx - compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
-  for am4372 - compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
-  for da850  - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
-  for dra746 - compatible = "ti,dra746-ecap", "ti,am3352-ecap";
-  for 66ak2g - compatible = "ti,k2g-ecap", "ti,am3352-ecap";
-  for am654  - compatible = "ti,am654-ecap", "ti,am3352-ecap";
-- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of
-  the cells format. The PWM channel index ranges from 0 to 4. The only third
-  cell flag supported by this binding is PWM_POLARITY_INVERTED.
-- reg: physical base address and size of the registers map.
-
-Optional properties:
-- clocks: Handle to the ECAP's functional clock.
-- clock-names: Must be set to "fck".
-
-Example:
-
-ecap0: ecap@48300100 { /* ECAP on am33xx */
-	compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
-	#pwm-cells = <3>;
-	reg = <0x48300100 0x80>;
-	clocks = <&l4ls_gclk>;
-	clock-names = "fck";
-};
-
-ecap0: ecap@48300100 { /* ECAP on am4372 */
-	compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
-	#pwm-cells = <3>;
-	reg = <0x48300100 0x80>;
-	ti,hwmods = "ecap0";
-	clocks = <&l4ls_gclk>;
-	clock-names = "fck";
-};
-
-ecap0: ecap@1f06000 { /* ECAP on da850 */
-	compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
-	#pwm-cells = <3>;
-	reg = <0x1f06000 0x80>;
-};
-
-ecap0: ecap@4843e100 {
-	compatible = "ti,dra746-ecap", "ti,am3352-ecap";
-	#pwm-cells = <3>;
-	reg = <0x4843e100 0x80>;
-	clocks = <&l4_root_clk_div>;
-	clock-names = "fck";
-};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.yaml b/Documentation/devicetree/bindings/pwm/pwm-tiecap.yaml
new file mode 100644
index 000000000000..3840ae709bc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-tiecap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI SOC ECAP based APWM controller
+
+maintainers:
+  - Vignesh R <vigneshr@ti.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,am3352-ecap
+      - items:
+          - enum:
+              - ti,da850-ecap
+              - ti,am4372-ecap
+              - ti,dra746-ecap
+              - ti,k2g-ecap
+              - ti,am654-ecap
+              - ti,am64-ecap
+          - const: ti,am3352-ecap
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+    description: |
+      See pwm.yaml in this directory for a description of the cells format.
+      The only third cell flag supported by this binding is PWM_POLARITY_INVERTED.
+
+  clock-names:
+    const: fck
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    ecap0: pwm@48300100 { /* ECAP on am33xx */
+        compatible = "ti,am3352-ecap";
+        #pwm-cells = <3>;
+        reg = <0x48300100 0x80>;
+        clocks = <&l4ls_gclk>;
+        clock-names = "fck";
+    };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
deleted file mode 100644
index c7e28f6d28be..000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-TI SOC EHRPWM based PWM controller
-
-Required properties:
-- compatible: Must be "ti,<soc>-ehrpwm".
-  for am33xx  - compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
-  for am4372  - compatible = "ti,am4372-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
-  for am654   - compatible = "ti,am654-ehrpwm", "ti-am3352-ehrpwm";
-  for da850   - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
-  for dra746 - compatible = "ti,dra746-ehrpwm", "ti-am3352-ehrpwm";
-- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of
-  the cells format. The only third cell flag supported by this binding is
-  PWM_POLARITY_INVERTED.
-- reg: physical base address and size of the registers map.
-
-Optional properties:
-- clocks: Handle to the PWM's time-base and functional clock.
-- clock-names: Must be set to "tbclk" and "fck".
-
-Example:
-
-ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
-	compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
-	#pwm-cells = <3>;
-	reg = <0x48300200 0x100>;
-	clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
-	clock-names = "tbclk", "fck";
-};
-
-ehrpwm0: pwm@48300200 { /* EHRPWM on am4372 */
-	compatible = "ti,am4372-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
-	#pwm-cells = <3>;
-	reg = <0x48300200 0x80>;
-	clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
-	clock-names = "tbclk", "fck";
-	ti,hwmods = "ehrpwm0";
-};
-
-ehrpwm0: pwm@1f00000 { /* EHRPWM on da850 */
-	compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
-	#pwm-cells = <3>;
-	reg = <0x1f00000 0x2000>;
-};
-
-ehrpwm0: pwm@4843e200 { /* EHRPWM on dra746 */
-	compatible = "ti,dra746-ehrpwm", "ti,am3352-ehrpwm";
-	#pwm-cells = <3>;
-	reg = <0x4843e200 0x80>;
-	clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
-	clock-names = "tbclk", "fck";
-};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.yaml b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.yaml
new file mode 100644
index 000000000000..70a8f766212e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-tiehrpwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI SOC EHRPWM based PWM controller
+
+maintainers:
+  - Vignesh R <vigneshr@ti.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,am3352-ehrpwm
+      - items:
+          - enum:
+              - ti,da850-ehrpwm
+              - ti,am4372-ehrpwm
+              - ti,dra746-ehrpwm
+              - ti,am654-ehrpwm
+              - ti,am64-epwm
+          - const: ti,am3352-ehrpwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+    description: |
+      See pwm.yaml in this directory for a description of the cells format.
+      The only third cell flag supported by this binding is PWM_POLARITY_INVERTED.
+
+  clock-names:
+    items:
+      - const: tbclk
+      - const: fck
+
+  clocks:
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
+        compatible = "ti,am3352-ehrpwm";
+        #pwm-cells = <3>;
+        reg = <0x48300200 0x100>;
+        clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+        clock-names = "tbclk", "fck";
+    };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-zx.txt b/Documentation/devicetree/bindings/pwm/pwm-zx.txt
deleted file mode 100644
index 3c8fe7aa8269..000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-zx.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-ZTE ZX PWM controller
-
-Required properties:
- - compatible: Should be "zte,zx296718-pwm".
- - reg: Physical base address and length of the controller's registers.
- - clocks : The phandle and specifier referencing the controller's clocks.
- - clock-names: "pclk" for PCLK, "wclk" for WCLK to the PWM controller.  The
-   PCLK is for register access, while WCLK is the reference clock for
-   calculating period and duty cycles.
- - #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
-   the cells format.
-
-Example:
-
-	pwm: pwm@1439000 {
-		compatible = "zte,zx296718-pwm";
-		reg = <0x1439000 0x1000>;
-		clocks = <&lsp1crm LSP1_PWM_PCLK>,
-			 <&lsp1crm LSP1_PWM_WCLK>;
-		clock-names = "pclk", "wclk";
-		#pwm-cells = <3>;
-	};
diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml
index fa4f9de92090..3c01f85029e5 100644
--- a/Documentation/devicetree/bindings/pwm/pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/pwm.yaml
@@ -9,6 +9,8 @@ title: PWM controllers (providers)
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
+select: false
+
 properties:
   $nodename:
     pattern: "^pwm(@.*|-[0-9a-f])*$"
@@ -20,10 +22,13 @@ properties:
 required:
   - "#pwm-cells"
 
+additionalProperties: true
+
 examples:
   - |
-    pwm: pwm@7000a000 {
-        compatible = "nvidia,tegra20-pwm";
-        reg = <0x7000a000 0x100>;
-        #pwm-cells = <2>;
+    pwm: pwm@1c20e00 {
+        compatible = "allwinner,sun7i-a20-pwm";
+        reg = <0x01c20e00 0xc>;
+        clocks = <&osc24M>;
+        #pwm-cells = <3>;
     };
diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
index 945c14e1be35..1c94acbc2b4a 100644
--- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
+++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
@@ -13,6 +13,7 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,pwm-r8a7742   # RZ/G1H
           - renesas,pwm-r8a7743   # RZ/G1M
           - renesas,pwm-r8a7744   # RZ/G1N
           - renesas,pwm-r8a7745   # RZ/G1E
@@ -20,6 +21,7 @@ properties:
           - renesas,pwm-r8a774a1  # RZ/G2M
           - renesas,pwm-r8a774b1  # RZ/G2N
           - renesas,pwm-r8a774c0  # RZ/G2E
+          - renesas,pwm-r8a774e1  # RZ/G2H
           - renesas,pwm-r8a7778   # R-Car M1A
           - renesas,pwm-r8a7779   # R-Car H1
           - renesas,pwm-r8a7790   # R-Car H2
@@ -27,6 +29,7 @@ properties:
           - renesas,pwm-r8a7794   # R-Car E2
           - renesas,pwm-r8a7795   # R-Car H3
           - renesas,pwm-r8a7796   # R-Car M3-W
+          - renesas,pwm-r8a77961  # R-Car M3-W+
           - renesas,pwm-r8a77965  # R-Car M3-N
           - renesas,pwm-r8a77970  # R-Car V3M
           - renesas,pwm-r8a77980  # R-Car V3H
@@ -56,8 +59,23 @@ properties:
 required:
   - compatible
   - reg
-  - '#pwm-cells'
   - clocks
+  - power-domains
+
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,pwm-r8a7778
+                - renesas,pwm-r8a7779
+    then:
+      required:
+        - resets
 
 additionalProperties: false
 
@@ -68,7 +86,7 @@ examples:
 
     pwm0: pwm@e6e30000 {
         compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
-        reg = <0 0xe6e30000 0 0x8>;
+        reg = <0xe6e30000 0x8>;
         clocks = <&cpg CPG_MOD 523>;
         power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
         resets = <&cpg 523>;
diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
index 4969a954993c..c6b2ab56b7fe 100644
--- a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
@@ -9,21 +9,37 @@ title: Renesas R-Car Timer Pulse Unit PWM Controller
 maintainers:
   - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
 
+select:
+  properties:
+    compatible:
+      contains:
+        const: renesas,tpu
+  required:
+    - compatible
+    - '#pwm-cells'
+
 properties:
   compatible:
     items:
       - enum:
           - renesas,tpu-r8a73a4   # R-Mobile APE6
           - renesas,tpu-r8a7740   # R-Mobile A1
+          - renesas,tpu-r8a7742   # RZ/G1H
           - renesas,tpu-r8a7743   # RZ/G1M
           - renesas,tpu-r8a7744   # RZ/G1N
           - renesas,tpu-r8a7745   # RZ/G1E
           - renesas,tpu-r8a7790   # R-Car H2
+          - renesas,tpu-r8a7791   # R-Car M2-W
+          - renesas,tpu-r8a7792   # R-Car V2H
+          - renesas,tpu-r8a7793   # R-Car M2-N
+          - renesas,tpu-r8a7794   # R-Car E2
           - renesas,tpu-r8a7795   # R-Car H3
           - renesas,tpu-r8a7796   # R-Car M3-W
+          - renesas,tpu-r8a77961  # R-Car M3-W+
           - renesas,tpu-r8a77965  # R-Car M3-N
           - renesas,tpu-r8a77970  # R-Car V3M
           - renesas,tpu-r8a77980  # R-Car V3H
+          - renesas,tpu-r8a779a0  # R-Car V3U
       - const: renesas,tpu
 
   reg:
@@ -52,7 +68,23 @@ properties:
 required:
   - compatible
   - reg
-  - '#pwm-cells'
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,tpu-r8a73a4
+                - renesas,tpu-r8a7740
+    then:
+      required:
+        - resets
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/pwm/sunplus,sp7021-pwm.yaml b/Documentation/devicetree/bindings/pwm/sunplus,sp7021-pwm.yaml
new file mode 100644
index 000000000000..d4fc9e8db1d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/sunplus,sp7021-pwm.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/sunplus,sp7021-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SoC SP7021 PWM Controller
+
+maintainers:
+  - Hammer Hsieh <hammerh0314@gmail.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: sunplus,sp7021-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#pwm-cells':
+    const: 2
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - clocks
+
+examples:
+  - |
+    pwm: pwm@9c007a00 {
+      compatible = "sunplus,sp7021-pwm";
+      reg = <0x9c007a00 0x80>;
+      clocks = <&clkc 0xa2>;
+      #pwm-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml b/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml
new file mode 100644
index 000000000000..46622661e5fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/toshiba,pwm-visconti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti PWM Controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,visconti-pwm
+
+  reg:
+    maxItems: 1
+
+  '#pwm-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pwm: pwm@241c0000 {
+            compatible = "toshiba,visconti-pwm";
+            reg = <0 0x241c0000 0 0x1000>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pwm_mux>;
+            #pwm-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
deleted file mode 100644
index a3106c72fbea..000000000000
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Anatop Voltage regulators
-
-Required properties:
-- compatible: Must be "fsl,anatop-regulator"
-- regulator-name: A string used as a descriptive name for regulator outputs
-- anatop-reg-offset: Anatop MFD register offset
-- anatop-vol-bit-shift: Bit shift for the register
-- anatop-vol-bit-width: Number of bits used in the register
-- anatop-min-bit-val: Minimum value of this register
-- anatop-min-voltage: Minimum voltage of this regulator
-- anatop-max-voltage: Maximum voltage of this regulator
-
-Optional properties:
-- anatop-delay-reg-offset: Anatop MFD step time register offset
-- anatop-delay-bit-shift: Bit shift for the step time register
-- anatop-delay-bit-width: Number of bits used in the step time register
-- vin-supply: The supply for this regulator
-- anatop-enable-bit: Regulator enable bit offset
-
-Any property defined as part of the core regulator
-binding, defined in regulator.txt, can also be used.
-
-Example:
-
-	regulator-vddpu {
-		compatible = "fsl,anatop-regulator";
-		regulator-name = "vddpu";
-		regulator-min-microvolt = <725000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-always-on;
-		anatop-reg-offset = <0x140>;
-		anatop-vol-bit-shift = <9>;
-		anatop-vol-bit-width = <5>;
-		anatop-delay-reg-offset = <0x170>;
-		anatop-delay-bit-shift = <24>;
-		anatop-delay-bit-width = <2>;
-		anatop-min-bit-val = <1>;
-		anatop-min-voltage = <725000>;
-		anatop-max-voltage = <1300000>;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
new file mode 100644
index 000000000000..0a66338c7e5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/anatop-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Anatop Voltage Regulators
+
+maintainers:
+  - Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    const: fsl,anatop-regulator
+
+  regulator-name: true
+
+  anatop-reg-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the anatop MFD register offset.
+
+  anatop-vol-bit-shift:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the bit shift for the register.
+
+  anatop-vol-bit-width:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the number of bits used in the register.
+
+  anatop-min-bit-val:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the minimum value of this register.
+
+  anatop-min-voltage:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the minimum voltage of this regulator.
+
+  anatop-max-voltage:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the maximum voltage of this regulator.
+
+  anatop-delay-reg-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the anatop MFD step time register offset.
+
+  anatop-delay-bit-shift:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the bit shift for the step time register.
+
+  anatop-delay-bit-width:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the number of bits used in the step time register.
+
+  anatop-enable-bit:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing regulator enable bit offset.
+
+  vin-supply:
+    description: input supply phandle.
+
+required:
+  - compatible
+  - regulator-name
+  - anatop-reg-offset
+  - anatop-vol-bit-shift
+  - anatop-vol-bit-width
+  - anatop-min-bit-val
+  - anatop-min-voltage
+  - anatop-max-voltage
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    regulator-vddpu {
+        compatible = "fsl,anatop-regulator";
+        regulator-name = "vddpu";
+        regulator-min-microvolt = <725000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-always-on;
+        anatop-reg-offset = <0x140>;
+        anatop-vol-bit-shift = <9>;
+        anatop-vol-bit-width = <5>;
+        anatop-delay-reg-offset = <0x170>;
+        anatop-delay-bit-shift = <24>;
+        anatop-delay-bit-width = <2>;
+        anatop-min-bit-val = <1>;
+        anatop-min-voltage = <725000>;
+        anatop-max-voltage = <1300000>;
+    };
diff --git a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
deleted file mode 100644
index 69bf41949b01..000000000000
--- a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Cirrus Logic Arizona class audio SoCs
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-This document lists regulator specific bindings, see the primary binding
-document:
-  For Wolfson Microelectronic Arizona codecs: ../mfd/arizona.txt
-  For Cirrus Logic Madera codecs: ../mfd/madera.txt
-
-Optional properties:
-  - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
-
-Optional subnodes:
-  - ldo1 : Initial data for the LDO1 regulator, as covered in
-    Documentation/devicetree/bindings/regulator/regulator.txt
-  - micvdd : Initial data for the MICVDD regulator, as covered in
-    Documentation/devicetree/bindings/regulator/regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
deleted file mode 100644
index 91974e6ee251..000000000000
--- a/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform.  Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the regulator portion
-of the driver.
-
-Also see these documents for generic binding information:
-  [1] Regulator: ../regulator/regulator.txt
-
-This binding must be part of the Lochnagar MFD binding:
-  [2] ../mfd/cirrus,lochnagar.txt
-
-Optional sub-nodes:
-
-  - VDDCORE : Initialisation data for the VDDCORE regulator, which
-    supplies the CODECs digital core if it has no build regulator for that
-    purpose.
-      Required Properties:
-      - compatible : One of the following strings:
-                     "cirrus,lochnagar2-vddcore"
-      - SYSVDD-supply: Primary power supply for the Lochnagar.
-
-  - MICVDD : Initialisation data for the MICVDD regulator, which
-    supplies the CODECs MICVDD.
-      Required Properties:
-      - compatible : One of the following strings:
-                     "cirrus,lochnagar2-micvdd"
-      - SYSVDD-supply: Primary power supply for the Lochnagar.
-
-  - MIC1VDD, MIC2VDD : Initialisation data for the MICxVDD supplies.
-      Required Properties:
-      - compatible : One of the following strings:
-                     "cirrus,lochnagar2-mic1vdd", "cirrus,lochnagar2-mic2vdd"
-      Optional Properties:
-      - cirrus,micbias-input : A property selecting which of the CODEC
-        minicard micbias outputs should be used, valid values are 1 - 4.
-      - MICBIAS1-supply, MICBIAS2-supply: Regulator supplies for the
-        MICxVDD outputs, supplying the digital microphones, normally
-        supplied from the attached CODEC.
-
-  - VDD1V8 : Recommended fixed regulator for the VDD1V8 regulator, which supplies the
-    CODECs analog and 1.8V digital supplies.
-      Required Properties:
-      - compatible : Should be set to "regulator-fixed"
-      - regulator-min-microvolt : Should be set to 1.8V
-      - regulator-max-microvolt : Should be set to 1.8V
-      - regulator-boot-on
-      - regulator-always-on
-      - vin-supply : Should be set to same supply as SYSVDD
-
-Example:
-
-lochnagar {
-	lochnagar-micvdd: MICVDD {
-		compatible = "cirrus,lochnagar2-micvdd";
-
-		SYSVDD-supply = <&wallvdd>;
-
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	lochnagar-vdd1v8: VDD1V8 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VDD1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-
-		vin-supply = <&wallvdd>;
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
index 27717e816e71..eb871447d508 100644
--- a/Documentation/devicetree/bindings/regulator/da9211.txt
+++ b/Documentation/devicetree/bindings/regulator/da9211.txt
@@ -15,6 +15,8 @@ Required properties:
 Optional properties:
 - enable-gpios: platform gpio for control of BUCKA/BUCKB.
 - Any optional property defined in regulator.txt
+  - regulator-initial-mode and regulator-allowed-modes may be specified using
+    mode values from dt-bindings/regulator/dlg,da9211-regulator.h
 
 Example 1) DA9211
 	pmic: da9211@68 {
@@ -30,6 +32,8 @@ Example 1) DA9211
 				regulator-min-microamp 	= <2000000>;
 				regulator-max-microamp 	= <5000000>;
 				enable-gpios = <&gpio 27 0>;
+				regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC
+							   DA9211_BUCK_MODE_AUTO>;
 			};
 		};
 	};
diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
new file mode 100644
index 000000000000..63e1161a87de
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/dlg,da9121.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9121 voltage regulator
+
+maintainers:
+  - Adam Ward <Adam.Ward.opensource@diasemi.com>
+
+description: |
+  Dialog Semiconductor DA9121 Single-channel 10A double-phase buck converter
+  Dialog Semiconductor DA9122 Double-channel  5A single-phase buck converter
+  Dialog Semiconductor DA9220 Double-channel  3A single-phase buck converter
+  Dialog Semiconductor DA9217 Single-channel  6A double-phase buck converter
+  Dialog Semiconductor DA9130 Single-channel 10A double-phase buck converter
+  Dialog Semiconductor DA9131 Double-channel  5A single-phase buck converter
+  Dialog Semiconductor DA9132 Double-channel  3A single-phase buck converter
+  Dialog Semiconductor DA9141 Single-channel 40A   quad-phase buck converter
+  Dialog Semiconductor DA9142 Single-channel 20A double-phase buck converter
+
+  Device parameter ranges
+
+  The current limits can be set to at/near double the rated current per channel
+  to allow for transient peaks.
+  Current limit changes when the output is enabled are not supported, as a
+  precaution against undefined behaviour.
+
+  |----------------------------------------------|
+  |               | range & reset default value  |
+  | Device        |------------------------------|
+  |               | microvolt    | microamp      |
+  |----------------------------------------------|
+  | DA9121/DA9130 | Min:  300000 | Min:  7000000 |
+  |               | Max: 1900000 | Max: 20000000 |
+  |----------------------------------------------|
+  | DA9121/DA9131 | Min:  300000 | Min:  3500000 |
+  |               | Max: 1900000 | Max: 10000000 |
+  |----------------------------------------------|
+  | DA9121/DA9131 | Min:  300000 | Min:  3500000 |
+  |               | Max: 1900000 | Max:  6000000 |
+  |----------------------------------------------|
+  | DA9217        | Min:  300000 | Min:  7000000 |
+  |               | Max: 1900000 | Max: 12000000 |
+  |----------------------------------------------|
+  | DA9141        | Min:  300000 | Min: 26000000 |
+  |               | Max: 1300000 | Max: 78000000 |
+  |----------------------------------------------|
+  | DA9142        | Min:  300000 | Min: 13000000 |
+  |               | Max: 1300000 | Max: 39000000 |
+  |----------------------------------------------|
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - dlg,da9121
+      - dlg,da9122
+      - dlg,da9220
+      - dlg,da9217
+      - dlg,da9130
+      - dlg,da9131
+      - dlg,da9132
+      - dlg,da9141
+      - dlg,da9142
+
+  reg:
+    maxItems: 1
+    description: Specifies the I2C slave address.
+
+  interrupts:
+    maxItems: 1
+    description: IRQ line information.
+
+  dlg,irq-polling-delay-passive-ms:
+    minimum: 1000
+    maximum: 10000
+    description: |
+      Specify the polling period, measured in milliseconds, between interrupt status
+      update checks. Range 1000-10000 ms.
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description: |
+      List of regulators provided by the device
+
+    patternProperties:
+      "^buck([1-2])$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          Properties for a single BUCK regulator
+
+        properties:
+          regulator-name:
+            pattern: "^BUCK([1-2])$"
+            description: |
+              BUCK2 present in DA9122, DA9220, DA9131, DA9132 only
+
+          regulator-initial-mode:
+            enum: [ 0, 1, 2, 3 ]
+            description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
+
+          enable-gpios:
+            maxItems: 1
+            description: Specify a valid GPIO for platform control of the regulator
+
+          dlg,ripple-cancel:
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            enum: [ 0, 1, 2, 3 ]
+            description: |
+              Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
+              Only present on multi-channel devices (DA9122, DA9220, DA9131, DA9132)
+
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9121-regulator.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@68 {
+        compatible = "dlg,da9121";
+        reg = <0x68>;
+
+        interrupt-parent = <&gpio6>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+        dlg,irq-polling-delay-passive-ms = <2000>;
+
+        regulators {
+          DA9121_BUCK1: buck1 {
+            regulator-name = "BUCK1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1900000>;
+            regulator-min-microamp = <7000000>;
+            regulator-max-microamp = <20000000>;
+            regulator-boot-on;
+            regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>;
+            enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+          };
+        };
+      };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9121-regulator.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@68 {
+        compatible = "dlg,da9122";
+        reg = <0x68>;
+
+        interrupt-parent = <&gpio6>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+        dlg,irq-polling-delay-passive-ms = <2000>;
+
+        regulators {
+          DA9122_BUCK1: buck1 {
+            regulator-name = "BUCK1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1900000>;
+            regulator-min-microamp = <3500000>;
+            regulator-max-microamp = <10000000>;
+            regulator-boot-on;
+            regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>;
+            enable-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+            dlg,ripple-cancel = <DA9121_BUCK_RIPPLE_CANCEL_NONE>;
+          };
+          DA9122_BUCK2: buck2 {
+            regulator-name = "BUCK2";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1900000>;
+            regulator-min-microamp = <3500000>;
+            regulator-max-microamp = <10000000>;
+            regulator-boot-on;
+            regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>;
+            enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+            dlg,ripple-cancel = <DA9121_BUCK_RIPPLE_CANCEL_NONE>;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/fan53555.txt b/Documentation/devicetree/bindings/regulator/fan53555.txt
index e7fc045281d1..013f096ac0aa 100644
--- a/Documentation/devicetree/bindings/regulator/fan53555.txt
+++ b/Documentation/devicetree/bindings/regulator/fan53555.txt
@@ -1,8 +1,8 @@
 Binding for Fairchild FAN53555 regulators
 
 Required properties:
-  - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827" or
-		"silergy,syr828"
+  - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827",
+		"silergy,syr828" or "tcs,tcs4525".
   - reg: I2C address
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index 3dbb9cf86f15..84eeaef179a5 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -18,20 +18,30 @@ description:
 
 allOf:
   - $ref: "regulator.yaml#"
-
-if:
-  properties:
-    compatible:
-      contains:
-        const: regulator-fixed-clock
-  required:
-    - clocks
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: regulator-fixed-clock
+    then:
+      required:
+        - clocks
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: regulator-fixed-domain
+    then:
+      required:
+        - power-domains
+        - required-opps
 
 properties:
   compatible:
     enum:
       - regulator-fixed
       - regulator-fixed-clock
+      - regulator-fixed-domain
 
   regulator-name: true
 
@@ -46,13 +56,27 @@ properties:
       is mandatory if compatible is chosen to regulator-fixed-clock.
     maxItems: 1
 
+  power-domains:
+    deprecated: true
+    description:
+      Power domain to use for enable control. This binding is only
+      available if the compatible is chosen to regulator-fixed-domain.
+    maxItems: 1
+
+  required-opps:
+    deprecated: true
+    description:
+      Performance state to use for enable control. This binding is only
+      available if the compatible is chosen to regulator-fixed-domain. The
+      power-domain binding is mandatory if compatible is chosen to
+      regulator-fixed-domain.
+    maxItems: 1
+
   startup-delay-us:
     description: startup time in microseconds
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   off-on-delay-us:
     description: off delay time in microseconds
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   enable-active-high:
     description:
@@ -73,6 +97,8 @@ required:
   - compatible
   - regulator-name
 
+unevaluatedProperties: false
+
 examples:
   - |
     reg_1v8: regulator-1v8 {
@@ -87,4 +113,27 @@ examples:
       gpio-open-drain;
       vin-supply = <&parent_reg>;
     };
+    reg_1v8_clk: regulator-1v8-clk {
+      compatible = "regulator-fixed-clock";
+      regulator-name = "1v8";
+      regulator-min-microvolt = <1800000>;
+      regulator-max-microvolt = <1800000>;
+      clocks = <&clock1>;
+      startup-delay-us = <70000>;
+      enable-active-high;
+      regulator-boot-on;
+      vin-supply = <&parent_reg>;
+    };
+    reg_1v8_domain: regulator-1v8-domain {
+      compatible = "regulator-fixed-domain";
+      regulator-name = "1v8";
+      regulator-min-microvolt = <1800000>;
+      regulator-max-microvolt = <1800000>;
+      power-domains = <&domain1>;
+      required-opps = <&domain1_state1>;
+      startup-delay-us = <70000>;
+      enable-active-high;
+      regulator-boot-on;
+      vin-supply = <&parent_reg>;
+    };
 ...
diff --git a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
new file mode 100644
index 000000000000..69e5402da761
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/google,cros-ec-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC controlled voltage regulators
+
+maintainers:
+  - Pi-Hsun Shih <pihsun@chromium.org>
+
+description:
+  Any property defined as part of the core regulator binding, defined in
+  regulator.yaml, can also be used.
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    const: google,cros-ec-regulator
+
+  reg:
+    maxItems: 1
+    description: Identifier for the voltage regulator to ChromeOS EC.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros_ec: ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            regulator@0 {
+                compatible = "google,cros-ec-regulator";
+                regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <3300000>;
+                reg = <0>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
index 9d3b28417fb6..6c3371d706bb 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
@@ -46,24 +46,22 @@ properties:
         0: LOW
         1: HIGH
       Default is LOW if nothing else is specified.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - maxItems: 8
-        items:
-          enum: [ 0, 1 ]
-          default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 8
+    items:
+      enum: [0, 1]
+      default: 0
 
   states:
     description: Selection of available voltages/currents provided by this
       regulator and matching GPIO configurations to achieve them. If there are
       no states in the "states" array, use a fixed regulator instead.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-matrix
-      - maxItems: 8
-        items:
-          items:
-            - description: Voltage in microvolts
-            - description: GPIO group state value
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    maxItems: 8
+    items:
+      items:
+        - description: Voltage in microvolts
+        - description: GPIO group state value
 
   startup-delay-us:
     description: startup time in microseconds
@@ -81,12 +79,14 @@ properties:
 
   regulator-type:
     description: Specifies what is being regulated.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string
-      - enum:
-          - voltage
-          - current
-        default: voltage
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - voltage
+      - current
+    default: voltage
+
+  vin-supply:
+    description: Input supply phandle.
 
 required:
   - compatible
@@ -94,6 +94,8 @@ required:
   - gpios
   - states
 
+unevaluatedProperties: false
+
 examples:
   - |
     gpio-regulator {
diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt
index ca58a68ffdf1..ab895cd1cac1 100644
--- a/Documentation/devicetree/bindings/regulator/lp872x.txt
+++ b/Documentation/devicetree/bindings/regulator/lp872x.txt
@@ -37,8 +37,8 @@ Optional properties:
     (Documentation/devicetree/bindings/regulator/regulator.txt)
 
 Datasheet
-  - LP8720: http://www.ti.com/lit/ds/symlink/lp8720.pdf
-  - LP8725: http://www.ti.com/lit/ds/symlink/lp8725.pdf
+  - LP8720: https://www.ti.com/lit/ds/symlink/lp8720.pdf
+  - LP8725: https://www.ti.com/lit/ds/symlink/lp8725.pdf
 
 Example 1) LP8720
 
diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
index 7d724159f890..ce0a4021ae7f 100644
--- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
@@ -24,8 +24,11 @@ properties:
     const: maxim,max77650-regulator
 
 patternProperties:
-  "^regulator@[0-3]$":
+  "^regulator-(ldo|sbb[0-2])$":
     $ref: "regulator.yaml#"
 
 required:
   - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/max77686.txt b/Documentation/devicetree/bindings/regulator/max77686.txt
deleted file mode 100644
index e9f7578ca09a..000000000000
--- a/Documentation/devicetree/bindings/regulator/max77686.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-Binding for Maxim MAX77686 regulators
-
-This is a part of the device tree bindings of MAX77686 multi-function device.
-More information can be found in ../mfd/max77686.txt file.
-
-The MAX77686 PMIC has 9 high-efficiency Buck and 26 Low-DropOut (LDO)
-regulators that can be controlled over I2C.
-
-Following properties should be present in main device node of the MFD chip.
-
-Optional node:
-- voltage-regulators : The regulators of max77686 have to be instantiated
-  under subnode named "voltage-regulators" using the following format.
-
-	regulator_name {
-		regulator-compatible = LDOn/BUCKn
-		standard regulator constraints....
-	};
-	refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-  The regulator node's name should be initialized with a string
-to get matched with their hardware counterparts as follow:
-
-	-LDOn 	:	for LDOs, where n can lie in range 1 to 26.
-			example: LDO1, LDO2, LDO26.
-	-BUCKn 	:	for BUCKs, where n can lie in range 1 to 9.
-			example: BUCK1, BUCK5, BUCK9.
-
-  Regulators which can be turned off during system suspend:
-	-LDOn	:	2, 6-8, 10-12, 14-16,
-	-BUCKn	:	1-4.
-  Use standard regulator bindings for it ('regulator-off-in-suspend').
-
-  LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
-  control. To turn this feature on this property must be added to the regulator
-  sub-node:
-	- maxim,ena-gpios :	one GPIO specifier enable control (the gpio
-				flags are actually ignored and always
-				ACTIVE_HIGH is used)
-
-Example:
-
-	max77686: pmic@9 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&wakeup_eint>;
-		interrupts = <26 IRQ_TYPE_NONE>;
-		reg = <0x09>;
-
-		voltage-regulators {
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1900000>;
-				regulator-max-microvolt = <1900000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "CAM_ISP_CORE_1.2V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1200000>;
-				maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
-			};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt
deleted file mode 100644
index b82943d83677..000000000000
--- a/Documentation/devicetree/bindings/regulator/max77802.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-Binding for Maxim MAX77802 regulators
-
-This is a part of device tree bindings of MAX77802 multi-function device.
-More information can be found in bindings/mfd/max77802.txt file.
-
-The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO)
-regulators that can be controlled over I2C.
-
-Following properties should be present in main device node of the MFD chip.
-
-Optional properties:
-- inb1-supply:  The input supply for BUCK1
-- inb2-supply:  The input supply for BUCK2
-- inb3-supply:  The input supply for BUCK3
-- inb4-supply:  The input supply for BUCK4
-- inb5-supply:  The input supply for BUCK5
-- inb6-supply:  The input supply for BUCK6
-- inb7-supply:  The input supply for BUCK7
-- inb8-supply:  The input supply for BUCK8
-- inb9-supply:  The input supply for BUCK9
-- inb10-supply: The input supply for BUCK10
-- inl1-supply:  The input supply for LDO8 and LDO15
-- inl2-supply:  The input supply for LDO17, LDO27, LDO30 and LDO35
-- inl3-supply:  The input supply for LDO3, LDO5, LDO6 and LDO7
-- inl4-supply:  The input supply for LDO10, LDO11, LDO13 and LDO14
-- inl5-supply:  The input supply for LDO9 and LDO19
-- inl6-supply:  The input supply for LDO4, LDO21, LDO24 and LDO33
-- inl7-supply:  The input supply for LDO18, LDO20, LDO28 and LDO29
-- inl9-supply:  The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34
-- inl10-supply: The input supply for LDO1 and LDO2
-
-Optional nodes:
-- regulators : The regulators of max77802 have to be instantiated
-  under subnode named "regulators" using the following format.
-
-	regulator-name {
-		standard regulator constraints....
-	};
-	refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-The regulator node name should be initialized with a string to get matched
-with their hardware counterparts as follow. The valid names are:
-
-	-LDOn 	:	for LDOs, where n can lie in ranges 1-15, 17-21, 23-30
-			and 32-35.
-			example: LDO1, LDO2, LDO35.
-	-BUCKn 	:	for BUCKs, where n can lie in range 1 to 10.
-			example: BUCK1, BUCK5, BUCK10.
-
-The max77802 regulator supports two different operating modes: Normal and Low
-Power Mode. Some regulators support the modes to be changed at startup or by
-the consumers during normal operation while others only support to change the
-mode during system suspend. The standard regulator suspend states binding can
-be used to configure the regulator operating mode.
-
-The regulators that support the standard "regulator-initial-mode" property,
-changing their mode during normal operation are: LDOs 1, 3, 20 and 21.
-
-The possible values for "regulator-initial-mode" and "regulator-mode" are:
-	1: Normal regulator voltage output mode.
-	3: Low Power which reduces the quiescent current down to only 1uA
-
-The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
-header and can be included by device tree source files.
-
-The standard "regulator-mode" property can only be used for regulators that
-support changing their mode to Low Power Mode during suspend. These regulators
-are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has
-been enabled for the given suspend state using "regulator-on-in-suspend" and
-has not been disabled for that state using "regulator-off-in-suspend".
-
-Example:
-
-	max77802@9 {
-		compatible = "maxim,max77802";
-		interrupt-parent = <&wakeup_eint>;
-		interrupts = <26 0>;
-		reg = <0x09>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		inb1-supply = <&parent_reg>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "vdd_1v0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-initial-mode = <MAX77802_OPMODE_LP>;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1900000>;
-				regulator-max-microvolt = <1900000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-mode = <MAX77802_OPMODE_LP>;
-				};
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/max8893.yaml b/Documentation/devicetree/bindings/regulator/max8893.yaml
new file mode 100644
index 000000000000..2b5e977bf409
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8893.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/max8893.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator driver for MAX8893 PMIC from Maxim Integrated.
+
+maintainers:
+  - Sergey Larin <cerg2010cerg2010@mail.ru>
+
+description: |
+  The device has 5 LDO regulators and a single BUCK regulator.
+  Programming is done through I2C bus.
+
+properties:
+  compatible:
+    const: maxim,max8893
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^(ldo[1-5]|buck)$":
+        $ref: "regulator.yaml#"
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pmic@3e {
+                    compatible = "maxim,max8893";
+                    reg = <0x3e>;
+
+                    regulators {
+                            /* Front camera - s5k6aafx, back - m5mo */
+                            /* Numbers used to indicate the sequence */
+                            front_1_back_1: buck {
+                                    regulator-name = "cam_isp_core_1v2";
+                                    regulator-min-microvolt = <1200000>;
+                                    regulator-max-microvolt = <1200000>;
+                            };
+
+                            front_4_back_5: ldo1 {
+                                    regulator-name = "vt_io_1v8,cam_isp_1v8";
+                                    regulator-min-microvolt = <1800000>;
+                                    regulator-max-microvolt = <1800000>;
+                            };
+
+                            front_3_back_4: ldo2 {
+                                    regulator-name = "vt_core_1v5";
+                                    regulator-min-microvolt = <1500000>;
+                                    regulator-max-microvolt = <1500000>;
+                            };
+
+                            front_5_back_6: ldo3 {
+                                    regulator-name = "vt_cam_1v8,vt_sensor_io_1v8";
+                                    regulator-min-microvolt = <1800000>;
+                                    regulator-max-microvolt = <1800000>;
+                            };
+
+                            ldo4 {
+                                    /* not used */
+                            };
+
+                            back_7: ldo5 {
+                                    regulator-name = "cam_sensor_io_1v8";
+                                    regulator-min-microvolt = <1800000>;
+                                    regulator-max-microvolt = <1800000>;
+                            };
+                    };
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/max8952.txt b/Documentation/devicetree/bindings/regulator/max8952.txt
deleted file mode 100644
index 866fcdd0f4eb..000000000000
--- a/Documentation/devicetree/bindings/regulator/max8952.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-Maxim MAX8952 voltage regulator
-
-Required properties:
-- compatible: must be equal to "maxim,max8952"
-- reg: I2C slave address, usually 0x60
-- max8952,dvs-mode-microvolt: array of 4 integer values defining DVS voltages
-  in microvolts. All values must be from range <770000, 1400000>
-- any required generic properties defined in regulator.txt
-
-Optional properties:
-- max8952,vid-gpios: array of two GPIO pins used for DVS voltage selection
-- max8952,en-gpio: GPIO used to control enable status of regulator
-- max8952,default-mode: index of default DVS voltage, from <0, 3> range
-- max8952,sync-freq: sync frequency, must be one of following values:
-    - 0: 26 MHz
-    - 1: 13 MHz
-    - 2: 19.2 MHz
-  Defaults to 26 MHz if not specified.
-- max8952,ramp-speed: voltage ramp speed, must be one of following values:
-    - 0: 32mV/us
-    - 1: 16mV/us
-    - 2: 8mV/us
-    - 3: 4mV/us
-    - 4: 2mV/us
-    - 5: 1mV/us
-    - 6: 0.5mV/us
-    - 7: 0.25mV/us
-  Defaults to 32mV/us if not specified.
-- any available generic properties defined in regulator.txt
-
-Example:
-
-	vdd_arm_reg: pmic@60 {
-		compatible = "maxim,max8952";
-		reg = <0x60>;
-
-		/* max8952-specific properties */
-		max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
-		max8952,en-gpio = <&gpx0 1 0>;
-		max8952,default-mode = <0>;
-		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-						<1050000>, <950000>;
-		max8952,sync-freq = <0>;
-		max8952,ramp-speed = <0>;
-
-		/* generic regulator properties */
-		regulator-name = "vdd_arm";
-		regulator-min-microvolt = <770000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
deleted file mode 100644
index c2c68fcc1b41..000000000000
--- a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Maxim MAX8973 Voltage Regulator
-
-Required properties:
-
-- compatible:	must be one of following:
-			"maxim,max8973"
-			"maxim,max77621".
-- reg:		the i2c slave address of the regulator. It should be 0x1b.
-
-Any standard regulator properties can be used to configure the single max8973
-DCDC.
-
-Optional properties:
-
--maxim,externally-enable: boolean, externally control the regulator output
-		enable/disable.
--maxim,enable-gpio: GPIO for enable control. If the valid GPIO is provided
-		then externally enable control will be considered.
--maxim,dvs-gpio: GPIO which is connected to DVS pin of device.
--maxim,dvs-default-state: Default state of GPIO during initialisation.
-		1 for HIGH and 0 for LOW.
--maxim,enable-remote-sense: boolean, enable reote sense.
--maxim,enable-falling-slew-rate: boolean, enable falling slew rate.
--maxim,enable-active-discharge: boolean: enable active discharge.
--maxim,enable-frequency-shift: boolean, enable 9% frequency shift.
--maxim,enable-bias-control: boolean, enable bias control. By enabling this
-		startup delay can be reduce to 20us from 220us.
--maxim,enable-etr: boolean, enable Enhanced Transient Response.
--maxim,enable-high-etr-sensitivity: boolean, Enhanced transient response
-		circuit is enabled and set for high sensitivity. If this
-		property is available then etr will be enable default.
-
-Enhanced transient response (ETR) will affect the configuration of CKADV.
-
--junction-warn-millicelsius: u32, junction warning temperature threshold
-		in millicelsius. If die temperature crosses this level then
-		device generates the warning interrupts.
-
-Please note that thermal functionality is only supported on MAX77621. The
-supported threshold warning temperature for MAX77621 are 120 degC and 140 degC.
-
-Example:
-
-	max8973@1b {
-		compatible = "maxim,max8973";
-		reg = <0x1b>;
-
-		regulator-min-microvolt = <935000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
deleted file mode 100644
index 6fe825b8ac1b..000000000000
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ /dev/null
@@ -1,144 +0,0 @@
-* Maxim MAX8997 Voltage and Current Regulator
-
-The Maxim MAX8997 is a multi-function device which includes voltage and
-current regulators, rtc, charger controller and other sub-blocks. It is
-interfaced to the host controller using a i2c interface. Each sub-block is
-addressed by the host system using different i2c slave address. This document
-describes the bindings for 'pmic' sub-block of max8997.
-
-Required properties:
-- compatible: Should be "maxim,max8997-pmic".
-- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
-
-- max8997,pmic-buck1-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-  units for buck1 when changing voltage using gpio dvs. Refer to [1] below
-  for additional information.
-
-- max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-  units for buck2 when changing voltage using gpio dvs. Refer to [1] below
-  for additional information.
-
-- max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-  units for buck5 when changing voltage using gpio dvs. Refer to [1] below
-  for additional information.
-
-[1] If none of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
-    property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage'
-    property should specify atleast one voltage level (which would be a
-    safe operating voltage).
-
-    If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
-    property is specified, then all the eight voltage values for the
-    'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
-
-Optional properties:
-- interrupts: Interrupt specifiers for two interrupt sources.
-  - First interrupt specifier is for 'irq1' interrupt.
-  - Second interrupt specifier is for 'alert' interrupt.
-- max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs.
-- max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
-- max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs.
-
-Additional properties required if either of the optional properties are used:
-- max8997,pmic-ignore-gpiodvs-side-effect: When GPIO-DVS mode is used for
-  multiple bucks, changing the voltage value of one of the bucks may affect
-  that of another buck, which is the side effect of the change (set_voltage).
-  Use this property to ignore such side effects and change the voltage.
-
-- max8997,pmic-buck125-default-dvs-idx: Default voltage setting selected from
-  the possible 8 options selectable by the dvs gpios. The value of this
-  property should be between 0 and 7. If not specified or if out of range, the
-  default value of this property is set to 0.
-
-- max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used
-  for dvs. The format of the gpio specifier depends in the gpio controller.
-
-Regulators: The regulators of max8997 that have to be instantiated should be
-included in a sub-node named 'regulators'. Regulator nodes included in this
-sub-node should be of the format as listed below.
-
-	regulator_name {
-		standard regulator bindings here
-	};
-
-The following are the names of the regulators that the max8997 pmic block
-supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of max8997.
-
-	- LDOn
-		  - valid values for n are 1 to 18 and 21
-		  - Example: LDO0, LD01, LDO2, LDO21
-	- BUCKn
-		  - valid values for n are 1 to 7.
-		  - Example: BUCK1, BUCK2, BUCK3, BUCK7
-
-	- ENVICHG: Battery Charging Current Monitor Output. This is a fixed
-		   voltage type regulator
-
-	- ESAFEOUT1: (ldo19)
-	- ESAFEOUT2: (ld020)
-
-	- CHARGER_CV: main battery charger voltage control
-	- CHARGER: main battery charger current control
-	- CHARGER_TOPOFF: end of charge current threshold level
-
-The bindings inside the regulator nodes use the standard regulator bindings
-which are documented elsewhere.
-
-Example:
-
-	max8997_pmic@66 {
-		compatible = "maxim,max8997-pmic";
-		interrupt-parent = <&wakeup_eint>;
-		reg = <0x66>;
-		interrupts = <4 0>, <3 0>;
-
-		max8997,pmic-buck1-uses-gpio-dvs;
-		max8997,pmic-buck2-uses-gpio-dvs;
-		max8997,pmic-buck5-uses-gpio-dvs;
-
-		max8997,pmic-ignore-gpiodvs-side-effect;
-		max8997,pmic-buck125-default-dvs-idx = <0>;
-
-		max8997,pmic-buck125-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
-						 <&gpx0 1 1 0 0>, /* SET2 */
-						 <&gpx0 2 1 0 0>; /* SET3 */
-
-		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
-						 <1250000>, <1200000>,
-						 <1150000>, <1100000>,
-						 <1000000>, <950000>;
-
-		max8997,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
-						 <1100000>, <1100000>,
-						 <1000000>, <1000000>,
-						 <1000000>, <1000000>;
-
-		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ABB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_ALIVE_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_ARM_1.2V";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml
new file mode 100644
index 000000000000..285dc7122977
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577-regulator
+      - maxim,max77836-regulator
+
+  CHARGER:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-min-microvolt: false
+      regulator-max-microvolt: false
+
+  SAFEOUT:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Safeout LDO regulator (fixed voltage).
+
+    properties:
+      regulator-min-microamp: false
+      regulator-max-microamp: false
+      regulator-min-microvolt:
+        const: 4900000
+      regulator-max-microvolt:
+        const: 4900000
+
+patternProperties:
+  "^LDO[12]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-min-microamp: false
+      regulator-max-microamp: false
+      regulator-min-microvolt:
+        minimum: 800000
+      regulator-max-microvolt:
+        maximum: 3950000
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577-regulator
+    then:
+      properties:
+        LDO1: false
+        LDO2: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max20086.yaml b/Documentation/devicetree/bindings/regulator/maxim,max20086.yaml
new file mode 100644
index 000000000000..05f72391185e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max20086.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max20086.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX20086-MAX20089 Camera Power Protector
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The MAX20086-MAX20089 are dual/quad camera power protectors, designed to
+  deliver power over coax for radar and camera modules. They support
+  software-configurable output switching and monitoring. The output voltage and
+  current limit are fixed by the hardware design.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max20086
+      - maxim,max20087
+      - maxim,max20088
+      - maxim,max20089
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO connected to the EN pin, active high
+
+  in-supply:
+    description: Input supply for the camera outputs (IN pin, 3.0V to 15.0V)
+
+  vdd-supply:
+    description: Input supply for the device (VDD pin, 3.0V to 5.5V)
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^OUT[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - in-supply
+  - vdd-supply
+  - regulators
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max20088
+              - maxim,max20089
+    then:
+      properties:
+        regulators:
+          properties:
+            OUT3: false
+            OUT4: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@28 {
+            compatible = "maxim,max20087";
+            reg = <0x28>;
+
+            in-supply = <&reg_12v0>;
+            vdd-supply = <&reg_3v3>;
+
+            enable-gpios = <&gpio 108 GPIO_ACTIVE_HIGH>;
+
+            regulators {
+                OUT1 {
+                    regulator-name = "VOUT1";
+                };
+                OUT2 {
+                    regulator-name = "VOUT2";
+                };
+                OUT3 {
+                    regulator-name = "VOUT3";
+                };
+                OUT4 {
+                    regulator-name = "VOUT4";
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml
new file mode 100644
index 000000000000..0e7cd4b3ace0
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77686 Power Management IC regulators
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77686 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77686 provides high-efficiency Buck and 26 Low-DropOut (LDO)
+  regulators.
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77686.yaml for
+  additional information and example.
+
+patternProperties:
+  # 26 LDOs
+  "^LDO([1-9]|1[0-9]|2[3-6])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single LDO regulator.
+      Regulators which can be turned off during system suspend:
+        LDO2, LDO6-8, LDO10-12, LDO14-16
+
+    required:
+      - regulator-name
+
+  # LDO20-LDO22 with maxim,ena-gpios
+  "^LDO2[0-2]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single LDO regulator.
+
+    properties:
+      maxim,ena-gpios:
+        maxItems: 1
+        description: |
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+    required:
+      - regulator-name
+
+  # 9 bucks
+  "^BUCK[1-7]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single BUCK regulator.
+      Regulators which can be turned off during system suspend:
+      BUCK[1-4]
+
+    required:
+      - regulator-name
+
+  "^BUCK[89]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single BUCK regulator.
+
+    properties:
+      maxim,ena-gpios:
+        maxItems: 1
+        description: |
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml
new file mode 100644
index 000000000000..945a539749e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC regulators
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  CHARGER:
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microamp:
+        minimum: 60000
+      regulator-max-microamp:
+        maximum: 2580000
+
+    required:
+      - regulator-name
+
+patternProperties:
+  "^ESAFEOUT[12]$":
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Safeout LDO regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microvolt:
+        minimum: 3300000
+      regulator-max-microvolt:
+        maximum: 4950000
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
new file mode 100644
index 000000000000..71138c611b6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77802 Power Management IC regulators
+
+maintainers:
+  - Javier Martinez Canillas <javier@dowhile0.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77802 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77686 provides 10 high-efficiency Buck and 32 Low-DropOut (LDO)
+  regulators.
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77802.yaml for
+  additional information and example.
+
+  Certain regulators support "regulator-initial-mode" and "regulator-mode".
+  The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
+  and their meaning is::
+    1 - Normal regulator voltage output mode.
+    3 - Low Power which reduces the quiescent current down to only 1uA
+
+  The standard "regulator-mode" property can only be used for regulators that
+  support changing their mode to Low Power Mode during suspend. These
+  regulators are:: bucks 2-4 and LDOs 1-35. Also, it only takes effect if the
+  regulator has been enabled for the given suspend state using
+  "regulator-on-in-suspend" and has not been disabled for that state using
+  "regulator-off-in-suspend".
+
+patternProperties:
+  # LDO1, LDO3, LDO20, LDO21
+  "^LDO([13]|2[01])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      LDOs supporting the regulator-initial-mode property and changing their
+      mode during normal operation.
+
+  # LDO2, LDO4-15, LDO17-19, LDO23-30, LDO32-35
+  "^LDO([24-9]|1[0-5789]|2[3-9]|3[02345])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      LDOs supporting the regulator-mode property (changing mode to Low Power
+      Mode during suspend).
+
+    properties:
+      regulator-initial-mode: false
+
+  # buck2-4
+  "^BUCK[2-4]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      bucks supporting the regulator-mode property (changing mode to Low Power
+      Mode during suspend).
+
+    properties:
+      regulator-initial-mode: false
+
+  # buck1, buck5-10
+  "^BUCK([15-9]|10)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      regulator-initial-mode: false
+
+    patternProperties:
+      regulator-state-(standby|mem|disk):
+        type: object
+        additionalProperties: true
+        properties:
+          regulator-mode: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
new file mode 100644
index 000000000000..78c0b63243f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77826.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77826 PMIC
+
+maintainers:
+  - Iskren Chernev <iskren.chernev@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - maxim,max77826
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    $ref: regulator.yaml#
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST
+
+    patternProperties:
+      "^LDO([1-9]|1[0-5])$":
+        type: object
+        $ref: regulator.yaml#
+
+      "^BUCK|BUCKBOOST$":
+        type: object
+        $ref: regulator.yaml#
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+            compatible = "maxim,max77826";
+            reg = <0x69>;
+
+            regulators {
+                LDO2 {
+                    regulator-min-microvolt = <650000>;
+                    regulator-max-microvolt = <3587500>;
+                };
+            };
+       };
+     };
+...
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml
new file mode 100644
index 000000000000..9695e7242882
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77843 MicroUSB Integrated
+  Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77843-regulator
+
+  CHARGER:
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microamp:
+        minimum: 100000
+      regulator-max-microamp:
+        maximum: 3150000
+
+    required:
+      - regulator-name
+
+patternProperties:
+  "^SAFEOUT[12]$":
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Safeout LDO regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microvolt:
+        minimum: 3300000
+      regulator-max-microvolt:
+        maximum: 4950000
+
+    required:
+      - regulator-name
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml
new file mode 100644
index 000000000000..3ff0d7d980e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max8952.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX8952 voltage regulator
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: maxim,max8952
+
+  max8952,default-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      index of default DVS voltage
+
+  max8952,dvs-mode-microvolt:
+    minItems: 4
+    maxItems: 4
+    items:
+      minimum: 770000
+      maximum: 1400000
+    description: |
+      Array of 4 integer values defining DVS voltages in microvolts. All values
+      must be from range <770000, 1400000>.
+
+  max8952,en-gpio:
+    maxItems: 1
+    description: |
+      GPIO used to control enable status of regulator
+
+  max8952,ramp-speed:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 0
+    description: |
+      Voltage ramp speed, values map to:
+       - 0: 32mV/us
+       - 1: 16mV/us
+       - 2: 8mV/us
+       - 3: 4mV/us
+       - 4: 2mV/us
+       - 5: 1mV/us
+       - 6: 0.5mV/us
+       - 7: 0.25mV/us
+      Defaults to 32mV/us if not specified.
+
+  max8952,sync-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    default: 0
+    description: |
+      Sync frequency, values map to:
+       - 0: 26 MHz
+       - 1: 13 MHz
+       - 2: 19.2 MHz
+      Defaults to 26 MHz if not specified.
+
+  max8952,vid-gpios:
+    minItems: 2
+    maxItems: 2
+    description: |
+      Array of two GPIO pins used for DVS voltage selection
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - max8952,dvs-mode-microvolt
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "maxim,max8952";
+            reg = <0x60>;
+
+            max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
+                                <&gpx0 4 GPIO_ACTIVE_HIGH>;
+            max8952,default-mode = <0>;
+            max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+                                         <1050000>, <950000>;
+            max8952,sync-freq = <0>;
+            max8952,ramp-speed = <0>;
+
+            regulator-name = "VARM_1.2V_C210";
+            regulator-min-microvolt = <770000>;
+            regulator-max-microvolt = <1400000>;
+            regulator-always-on;
+            regulator-boot-on;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml
new file mode 100644
index 000000000000..b92eef68c19f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max8973.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX8973/MAX77621 voltage regulator
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max8973
+      - maxim,max77621
+
+  junction-warn-millicelsius:
+    description: |
+      Junction warning temperature threshold in millicelsius. If die
+      temperature crosses this level then device generates the warning
+      interrupts.
+      Please note that thermal functionality is only supported on MAX77621. The
+      supported threshold warning temperature for MAX77621 are 120 degC and 140
+      degC.
+
+  maxim,dvs-gpio:
+    maxItems: 1
+    description: |
+      GPIO which is connected to DVS pin of device.
+
+  maxim,dvs-default-state:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Default state of GPIO during initialisation.
+      1 for HIGH and 0 for LOW.
+
+  maxim,externally-enable:
+    type: boolean
+    description: |
+      Externally control the regulator output enable/disable.
+
+  maxim,enable-gpio:
+    maxItems: 1
+    description: |
+      GPIO for enable control. If the valid GPIO is provided then externally
+      enable control will be considered.
+
+  maxim,enable-remote-sense:
+    type: boolean
+    description: Enable remote sense.
+
+  maxim,enable-falling-slew-rate:
+    type: boolean
+    description: Enable falling slew rate.
+
+  maxim,enable-active-discharge:
+    type: boolean
+    description: Eable active discharge.
+
+  maxim,enable-frequency-shift:
+    type: boolean
+    description: Enable 9% frequency shift.
+
+  maxim,enable-bias-control:
+    type: boolean
+    description: |
+      Enable bias control which can reduce the startup delay to 20us from 220us.
+
+  maxim,enable-etr:
+    type: boolean
+    description: Enable Enhanced Transient Response.
+
+  maxim,enable-high-etr-sensitivity:
+    type: boolean
+    description: |
+      Enhanced transient response circuit is enabled and set for high
+      sensitivity. If this property is available then etr will be enable
+      default.
+      Enhanced transient response (ETR) will affect the configuration of CKADV.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@1b {
+            compatible = "maxim,max8973";
+            reg = <0x1b>;
+
+            regulator-min-microvolt = <935000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-boot-on;
+            regulator-always-on;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@1b {
+            compatible = "maxim,max77621";
+            reg = <0x1b>;
+            interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+            regulator-always-on;
+            regulator-boot-on;
+            regulator-min-microvolt = <800000>;
+            regulator-max-microvolt = <1231250>;
+            regulator-name = "PPVAR_CPU";
+            regulator-ramp-delay = <12500>;
+            maxim,dvs-default-state = <1>;
+            maxim,enable-active-discharge;
+            maxim,enable-bias-control;
+            maxim,enable-etr;
+            maxim,enable-gpio = <&pmic 5 GPIO_ACTIVE_HIGH>;
+            maxim,externally-enable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml
new file mode 100644
index 000000000000..2b266ea43716
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml
@@ -0,0 +1,446 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max8997.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX8997 Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Maxim MAX8997 is a Power Management IC which includes voltage and current
+  regulators, charger controller with fuel gauge, RTC, clock outputs, haptic
+  motor driver, flash LED driver and Micro-USB Interface Controller.
+
+  The binding here is not complete and describes only regulator and charger
+  controller parts.
+
+properties:
+  compatible:
+    const: maxim,max8997-pmic
+
+  charger-supply:
+    description: |
+      Regulator node for charging current.
+
+  interrupts:
+    items:
+      - description: irq1 interrupt
+      - description: alert interrupt
+
+  max8997,pmic-buck1-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck1 when
+      changing voltage using GPIO DVS.
+      If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is
+      specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should
+      specify at least one voltage level (which would be a safe operating
+      voltage).
+
+  max8997,pmic-buck2-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck2 when
+      changing voltage using GPIO DVS.
+      If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is
+      specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should
+      specify at least one voltage level (which would be a safe operating
+      voltage).
+
+  max8997,pmic-buck5-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck5 when
+      changing voltage using GPIO DVS.
+      If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is
+      specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should
+      specify at least one voltage level (which would be a safe operating
+      voltage).
+
+  max8997,pmic-buck1-uses-gpio-dvs:
+    type: boolean
+    description: |
+      buck1 can be controlled by GPIO DVS.
+
+  max8997,pmic-buck2-uses-gpio-dvs:
+    type: boolean
+    description: |
+      buck2 can be controlled by GPIO DVS.
+
+  max8997,pmic-buck5-uses-gpio-dvs:
+    type: boolean
+    description: |
+      buck5 can be controlled by GPIO DVS.
+
+  max8997,pmic-buck125-default-dvs-idx:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 0
+    description: |
+      Default voltage setting selected from the possible 8 options selectable
+      by the dvs gpios. The value of this property should be between 0 and 7.
+      If not specified or if out of range, the default value of this property
+      is set to 0.
+
+  max8997,pmic-buck125-dvs-gpios:
+    minItems: 3
+    maxItems: 3
+    description: |
+      GPIO specifiers for three host gpio's used for DVS.
+
+  max8997,pmic-ignore-gpiodvs-side-effect:
+    type: boolean
+    description: |
+      When GPIO-DVS mode is used for multiple bucks, changing the voltage value
+      of one of the bucks may affect that of another buck, which is the side
+      effect of the change (set_voltage).  Use this property to ignore such
+      side effects and change the voltage.
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description:
+      List of child nodes that specify the regulators.
+
+    patternProperties:
+      # 1-18 and 21 LDOs
+      "^LDO([1-9]|1[0-8]|21)$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single LDO regulator.
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      # 7 bucks
+      "^BUCK[1-7]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single BUCK regulator.
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      "^EN32KHZ_[AC]P$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          32768 Hz clock output (modelled as regulator)
+
+        properties:
+          regulator-name: true
+          regulator-always-on: true
+          regulator-boot-on: true
+
+        required:
+          - regulator-name
+
+        additionalProperties: false
+
+    properties:
+      CHARGER:
+        type: object
+        $ref: regulator.yaml#
+        description: main battery charger current control
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      CHARGER_CV:
+        type: object
+        $ref: regulator.yaml#
+        description: main battery charger voltage control
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      CHARGER_TOPOFF:
+        type: object
+        $ref: regulator.yaml#
+        description: end of charge current threshold level
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      ENVICHG:
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          Battery Charging Current Monitor Output. This is a fixed voltage type
+          regulator
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      ESAFEOUT1:
+        type: object
+        $ref: regulator.yaml#
+        description: LDO19
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      ESAFEOUT2:
+        type: object
+        $ref: regulator.yaml#
+        description: LDO20
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - max8997,pmic-buck1-dvs-voltage
+  - max8997,pmic-buck2-dvs-voltage
+  - max8997,pmic-buck5-dvs-voltage
+  - reg
+  - regulators
+
+dependencies:
+  max8997,pmic-buck1-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
+  max8997,pmic-buck2-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
+  max8997,pmic-buck5-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
+
+additionalProperties: false
+
+if:
+  anyOf:
+    - required:
+        - max8997,pmic-buck1-uses-gpio-dvs
+    - required:
+        - max8997,pmic-buck2-uses-gpio-dvs
+    - required:
+        - max8997,pmic-buck5-uses-gpio-dvs
+then:
+  properties:
+    max8997,pmic-buck1-dvs-voltage:
+      minItems: 8
+      maxItems: 8
+    max8997,pmic-buck2-dvs-voltage:
+      minItems: 8
+      maxItems: 8
+    max8997,pmic-buck5-dvs-voltage:
+      minItems: 8
+      maxItems: 8
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max8997-pmic";
+            reg = <0x66>;
+
+            interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
+                                  <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
+
+            max8997,pmic-buck1-uses-gpio-dvs;
+            max8997,pmic-buck2-uses-gpio-dvs;
+            max8997,pmic-buck5-uses-gpio-dvs;
+
+            max8997,pmic-ignore-gpiodvs-side-effect;
+            max8997,pmic-buck125-default-dvs-idx = <0>;
+
+            max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+                                             <&gpx0 6 GPIO_ACTIVE_HIGH>,
+                                             <&gpl0 0 GPIO_ACTIVE_HIGH>;
+
+            max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+                                             <1250000>, <1200000>,
+                                             <1150000>, <1100000>,
+                                             <1000000>, <950000>;
+
+            max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+                                             <950000>,  <900000>,
+                                             <1100000>, <1000000>,
+                                             <950000>,  <900000>;
+
+            max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+                                             <1200000>, <1200000>,
+                                             <1200000>, <1200000>,
+                                             <1200000>, <1200000>;
+
+            pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
+            pinctrl-names = "default";
+
+            charger-supply = <&charger_reg>;
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VADC_3.3V_C210";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                LDO2 {
+                    regulator-name = "VALIVE_1.1V_C210";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                };
+
+                BUCK1 {
+                    regulator-name = "VARM_1.2V_C210";
+                    regulator-min-microvolt = <65000>;
+                    regulator-max-microvolt = <2225000>;
+                    regulator-always-on;
+                };
+
+                // ...
+
+                BUCK7 {
+                    regulator-name = "VCC_SUB_2.0V";
+                    regulator-min-microvolt = <2000000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-always-on;
+                };
+
+                ESAFEOUT1 {
+                    regulator-name = "SAFEOUT1";
+                };
+
+                ESAFEOUT2 {
+                    regulator-name = "SAFEOUT2";
+                    regulator-boot-on;
+                };
+
+                EN32KHZ_AP {
+                    regulator-name = "EN32KHZ_AP";
+                    regulator-always-on;
+                };
+
+                EN32KHZ_CP {
+                    regulator-name = "EN32KHZ_CP";
+                    regulator-always-on;
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <200000>;
+                    regulator-max-microamp = <950000>;
+                };
+
+                CHARGER_CV {
+                    regulator-name = "CHARGER_CV";
+                    regulator-min-microvolt = <4200000>;
+                    regulator-max-microvolt = <4200000>;
+                    regulator-always-on;
+                };
+
+                CHARGER_TOPOFF {
+                    regulator-name = "CHARGER_TOPOFF";
+                    regulator-min-microamp = <200000>;
+                    regulator-max-microamp = <200000>;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max8997-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>,
+                         <3 IRQ_TYPE_EDGE_FALLING>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&max8997_irq>;
+
+            max8997,pmic-buck1-dvs-voltage = <1350000>;
+            max8997,pmic-buck2-dvs-voltage = <1100000>;
+            max8997,pmic-buck5-dvs-voltage = <1200000>;
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VDD_ABB_3.3V";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VDD_ARM_1.2V";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+
+                // ...
+
+                EN32KHZ_AP {
+                    regulator-name = "EN32KHZ_AP";
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
index b8f843fa6092..451cc4e86b01 100644
--- a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
@@ -4,13 +4,14 @@ Required properties:
 - compatible: "microchip,mcp16502"
 - reg: I2C slave address
 - lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during
-	     suspend-to-ram, keeping the PMIC into HIBERNATE mode.
+	     suspend-to-ram, keeping the PMIC into HIBERNATE mode; this
+	     property is optional;
 - regulators: A node that houses a sub-node for each regulator within
               the device. Each sub-node is identified using the node's
               name. The content of each sub-node is defined by the
               standard binding for regulators; see regulator.txt.
 
-Regualtors of MCP16502 PMIC:
+Regulators of MCP16502 PMIC:
 1) VDD_IO	- Buck (1.2 - 3.7 V)
 2) VDD_DDR	- Buck (0.6 - 1.85 V)
 3) VDD_CORE	- Buck (0.6 - 1.85 V)
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
new file mode 100644
index 000000000000..771cc134393c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
@@ -0,0 +1,273 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6331-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6331 Regulator from MediaTek Integrated
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  The MT6331 PMIC provides 6 BUCK and 21 LDO (Low Dropout) regulators
+  and nodes are named according to the regulator type:
+  buck-<name> and ldo-<name>.
+  MT6331 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck-v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-v(avdd32aud|auxa32)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(avdd32aud|auxa32)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-vcam(a|af|d|io)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vcam(a|af|d|io)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-vtcxo[12]$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vtcxo[12]$"
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+  "^ldo-vgp[1234]$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vgp[12]$"
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6331_vdvfs11_reg: buck-vdvfs11 {
+          regulator-name = "vdvfs11";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs12_reg: buck-vdvfs12 {
+          regulator-name = "vdvfs12";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs13_reg: buck-vdvfs13 {
+          regulator-name = "vdvfs13";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs14_reg: buck-vdvfs14 {
+          regulator-name = "vdvfs14";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vcore2_reg: buck-vcore2 {
+          regulator-name = "vcore2";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vio18_reg: buck-vio18 {
+          regulator-name = "vio18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <0>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vtcxo1_reg: ldo-vtcxo1 {
+          regulator-name = "vtcxo1";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vtcxo2_reg: ldo-vtcxo2 {
+          regulator-name = "vtcxo2";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_avdd32_aud_reg: ldo-avdd32aud {
+          regulator-name = "avdd32_aud";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6331_vauxa32_reg: ldo-vauxa32 {
+          regulator-name = "vauxa32";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6331_vcama_reg: ldo-vcama {
+          regulator-name = "vcama";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+        };
+        mt6331_vio28_reg: ldo-vio28 {
+          regulator-name = "vio28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vcamaf_reg: ldo-vcamaf {
+          regulator-name = "vcam_af";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vmc_reg: ldo-vmc {
+          regulator-name = "vmc";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vmch_reg: ldo-vmch {
+          regulator-name = "vmch";
+          regulator-min-microvolt = <3000000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vemc33_reg: ldo-vemc33 {
+          regulator-name = "vemc33";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vgp1_reg: ldo-vgp1 {
+          regulator-name = "vgp1";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vsim1_reg: ldo-vsim1 {
+          regulator-name = "vsim1";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6331_vsim2_reg: ldo-vsim2 {
+          regulator-name = "vsim2";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6331_vmipi_reg: ldo-vmipi {
+          regulator-name = "vmipi";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vibr_reg: ldo-vibr {
+          regulator-name = "vibr";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vgp4_reg: ldo-vgp4 {
+          regulator-name = "vgp4";
+          regulator-min-microvolt = <1600000>;
+          regulator-max-microvolt = <2200000>;
+        };
+        mt6331_vcamd_reg: ldo-vcamd {
+          regulator-name = "vcamd";
+          regulator-min-microvolt = <900000>;
+          regulator-max-microvolt = <1500000>;
+        };
+        mt6331_vusb10_reg: ldo-vusb10 {
+          regulator-name = "vusb";
+          regulator-min-microvolt = <1000000>;
+          regulator-max-microvolt = <1300000>;
+          regulator-boot-on;
+        };
+        mt6331_vcamio_reg: ldo-vcamio {
+          regulator-name = "vcam_io";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+        };
+        mt6331_vsram_reg: ldo-vsram {
+          regulator-name = "vsram";
+          regulator-min-microvolt = <1012500>;
+          regulator-max-microvolt = <1012500>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vgp2_reg: ldo-vgp2 {
+          regulator-name = "vgp2";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1500000>;
+          regulator-boot-on;
+        };
+        mt6331_vgp3_reg: ldo-vgp3 {
+          regulator-name = "vgp3";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+        };
+        mt6331_vrtc_reg: ldo-vrtc {
+          regulator-name = "vrtc";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+        };
+        mt6331_vdig18_reg: ldo-vdig18 {
+          regulator-name = "dvdd18_dig";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
new file mode 100644
index 000000000000..3218f43e6957
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6332-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6332 Regulator from MediaTek Integrated
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  The MT6332 Companion PMIC provides 6 BUCK and 4 LDO (Low Dropout)
+  regulators and nodes are named according to the regulator type:
+  buck-<name> and ldo-<name>.
+  MT6332 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck-v(dram|dvfs2|pa|rf18a|rf18b|sbst)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(dram|dvfs2|pa|rf18a|rf18b|sbst)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-v(bif28|dig18|sram|usb33)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(bif28|dig18|sram|usb33)$"
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6332_vdram_reg: buck-vdram {
+          regulator-name = "vdram";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-allowed-modes = <0 1>;
+          regulator-always-on;
+        };
+        mt6332_vdvfs2_reg: buck-vdvfs2 {
+          regulator-name = "vdvfs2";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vpa_reg: buck-vpa {
+          regulator-name = "vpa";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <3400000>;
+        };
+        mt6332_vrf18a_reg: buck-vrf18a {
+          regulator-name = "vrf18a";
+          regulator-min-microvolt = <1050000>;
+          regulator-max-microvolt = <2240625>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vrf18b_reg: buck-vrf18b {
+          regulator-name = "vrf18b";
+          regulator-min-microvolt = <1050000>;
+          regulator-max-microvolt = <2240625>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vsbst_reg: buck-vsbst {
+          regulator-name = "vsbst";
+          regulator-min-microvolt = <3500000>;
+          regulator-max-microvolt = <7468750>;
+        };
+        mt6332_vauxb32_reg: ldo-vauxb32 {
+          regulator-name = "vauxb32";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6332_vbif28_reg: ldo-vbif28 {
+          regulator-name = "vbif28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+        };
+        mt6332_vdig18_reg: ldo-vdig18 {
+          regulator-name = "vdig18";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-always-on;
+        };
+        mt6332_vsram_reg: ldo-vsram {
+          regulator-name = "vauxa32";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-always-on;
+        };
+        mt6332_vusb33_reg: ldo-vusb33 {
+          regulator-name = "vusb33";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3300000>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
new file mode 100644
index 000000000000..7023c597c3ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mp5416.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power System MP5416 PMIC
+
+maintainers:
+  - Saravanan Sekar <sravanhome@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "^pmic@[0-9a-f]{1,2}$"
+  compatible:
+    enum:
+      - mps,mp5416
+      - mps,mp5496
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts BUCK[1-4] and LDO[1-4]
+
+    patternProperties:
+      "^buck[1-4]$":
+        $ref: "regulator.yaml#"
+        type: object
+
+      "^ldo[1-4]$":
+        $ref: "regulator.yaml#"
+        type: object
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+          compatible = "mps,mp5416";
+          reg = <0x69>;
+
+          regulators {
+
+            buck1 {
+             regulator-name = "buck1";
+             regulator-min-microvolt = <600000>;
+             regulator-max-microvolt = <2187500>;
+             regulator-min-microamp  = <3800000>;
+             regulator-max-microamp  = <6800000>;
+             regulator-boot-on;
+            };
+
+            ldo2 {
+             regulator-name = "ldo2";
+             regulator-min-microvolt = <800000>;
+             regulator-max-microvolt = <3975000>;
+            };
+         };
+       };
+     };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
new file mode 100644
index 000000000000..9245b7199439
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mp886x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power Systems MP8867/MP8869 voltage regulator
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mps,mp8867
+      - mps,mp8869
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO to enable/disable the regulator.
+    maxItems: 1
+
+  mps,fb-voltage-divider:
+    description: An array of two integers containing the resistor
+      values R1 and R2 of the feedback voltage divider in kilo ohms.
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    maxItems: 2
+
+  mps,switch-frequency-hz:
+    description: The valid switch frequency in Hertz.
+    enum: [500000, 750000, 1000000, 1250000, 1500000]
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - mps,fb-voltage-divider
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@62 {
+          compatible = "mps,mp8869";
+          regulator-name = "vcpu";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <1150000>;
+          enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
+          mps,fb-voltage-divider = <80 240>;
+          reg = <0x62>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
index a682af0dc67e..c2e8c54e5311 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -21,51 +21,45 @@ properties:
 
   regulators:
     type: object
-    allOf:
-      - $ref: regulator.yaml#
+    $ref: regulator.yaml#
+
     description: |
       list of regulators provided by this controller, must be named
       after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5]
 
     properties:
       mps,switch-freq:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint8"
-        enum: [ 0, 1, 2, 3 ]
+        $ref: "/schemas/types.yaml#/definitions/uint8"
+        enum: [0, 1, 2, 3]
         default: 2
         description: |
           switching frequency must be one of following corresponding value
           1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz
 
-    patternProperties:
-      "^ldo[1-4]$":
+      ldortc:
         type: object
-        allOf:
-          - $ref: regulator.yaml#
+        $ref: regulator.yaml#
 
-      "^ldortc$":
+    patternProperties:
+      "^ldo[1-4]$":
         type: object
-        allOf:
-          - $ref: regulator.yaml#
+        $ref: regulator.yaml#
 
       "^buck[1-4]$":
         type: object
-        allOf:
-          - $ref: regulator.yaml#
+        $ref: regulator.yaml#
 
         properties:
           mps,buck-softstart:
-            allOf:
-              - $ref: "/schemas/types.yaml#/definitions/uint8"
-            enum: [ 0, 1, 2, 3 ]
+            $ref: "/schemas/types.yaml#/definitions/uint8"
+            enum: [0, 1, 2, 3]
             description: |
               defines the soft start time of this buck, must be one of the following
               corresponding values 150us, 300us, 610us, 920us
 
           mps,buck-phase-delay:
-            allOf:
-              - $ref: "/schemas/types.yaml#/definitions/uint8"
-            enum: [ 0, 1, 2, 3 ]
+            $ref: "/schemas/types.yaml#/definitions/uint8"
+            enum: [0, 1, 2, 3]
             description: |
               defines the phase delay of this buck, must be one of the following
               corresponding values 0deg, 90deg, 180deg, 270deg
@@ -75,7 +69,8 @@ properties:
             description: |
               disables over voltage protection of this buck
 
-      additionalProperties: false
+        unevaluatedProperties: false
+
     additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
new file mode 100644
index 000000000000..364b58730be2
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6315-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6315 Regulator
+
+maintainers:
+  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |
+  The MT6315 is a power management IC (PMIC) configurable with SPMI.
+  that contains 4 BUCKs output which can combine with each other
+  by different efuse settings.
+
+properties:
+  compatible:
+    const: mediatek,mt6315-regulator
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: List of regulators and its properties
+
+    patternProperties:
+      "^vbuck[1-4]$":
+        type: object
+        $ref: "regulator.yaml#"
+        unevaluatedProperties: false
+
+        properties:
+          regulator-compatible:
+            pattern: "^vbuck[1-4]$"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic@6 {
+      compatible = "mediatek,mt6315-regulator";
+      reg = <0x6 0>;
+
+      regulators {
+        vbuck1 {
+          regulator-compatible = "vbuck1";
+          regulator-min-microvolt = <300000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-enable-ramp-delay = <256>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+
+        vbuck3 {
+          regulator-compatible = "vbuck3";
+          regulator-min-microvolt = <300000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-enable-ramp-delay = <256>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
index 9a90a92f2d7e..7034cdca54e0 100644
--- a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
@@ -8,14 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt.
 
 The valid names for regulators are::
 BUCK:
-  buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu,
-  buck_vs2, buck_vmodem, buck_vs1
+  buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11,
+  buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1
 LDO:
   ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio,
   ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
-  ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28,
-  ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18,
-  ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
+  ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18,
+  ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12,
+  ldo_vrf18, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
   ldo_vsim2
 
 Example:
@@ -354,5 +354,17 @@ Example:
 				regulator-max-microvolt = <3100000>;
 				regulator-enable-ramp-delay = <540>;
 			};
+
+			mt6358_vcore_sshub_reg: buck_vcore_sshub {
+				regulator-name = "vcore_sshub";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+			};
+
+			mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub {
+				regulator-name = "vsram_others_sshub";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+			};
 		};
 	};
diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
new file mode 100644
index 000000000000..8cc413eb482d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
@@ -0,0 +1,385 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6359-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6359 Regulator from MediaTek Integrated
+
+maintainers:
+  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |
+  List of regulators provided by this controller. It is named
+  according to its regulator type, buck_<name> and ldo_<name>.
+  MT6359 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(ibr|rf12|usb|camio|efuse|xo22)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(rfck|emc|a12|a09|ufs|bbck)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vsram_(proc2|others|md|proc1|others_sshub)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(fe|bif|io)28$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(fe|bif|io)28$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(aud|io|aux|rf|m)18$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(aud|io|aux|rf|m)18$"
+
+    unevaluatedProperties: false
+
+  "^ldo_vsim[12]$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vsim[12]$"
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6359_vs1_buck_reg: buck_vs1 {
+          regulator-name = "vs1";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <2200000>;
+          regulator-enable-ramp-delay = <0>;
+          regulator-always-on;
+        };
+        mt6359_vgpu11_buck_reg: buck_vgpu11 {
+          regulator-name = "vgpu11";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <5000>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vmodem_buck_reg: buck_vmodem {
+          regulator-name = "vmodem";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1100000>;
+          regulator-ramp-delay = <10760>;
+          regulator-enable-ramp-delay = <200>;
+        };
+        mt6359_vpu_buck_reg: buck_vpu {
+          regulator-name = "vpu";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <5000>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vcore_buck_reg: buck_vcore {
+          regulator-name = "vcore";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1300000>;
+          regulator-ramp-delay = <5000>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vs2_buck_reg: buck_vs2 {
+          regulator-name = "vs2";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <1600000>;
+          regulator-enable-ramp-delay = <0>;
+          regulator-always-on;
+        };
+        mt6359_vpa_buck_reg: buck_vpa {
+          regulator-name = "vpa";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <3650000>;
+          regulator-enable-ramp-delay = <300>;
+        };
+        mt6359_vproc2_buck_reg: buck_vproc2 {
+          regulator-name = "vproc2";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <7500>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vproc1_buck_reg: buck_vproc1 {
+          regulator-name = "vproc1";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <7500>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vcore_sshub_buck_reg: buck_vcore_sshub {
+          regulator-name = "vcore_sshub";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+        };
+        mt6359_vgpu11_sshub_buck_reg: buck_vgpu11_sshub {
+          regulator-name = "vgpu11_sshub";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+        };
+        mt6359_vaud18_ldo_reg: ldo_vaud18 {
+          regulator-name = "vaud18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vsim1_ldo_reg: ldo_vsim1 {
+          regulator-name = "vsim1";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6359_vibr_ldo_reg: ldo_vibr {
+          regulator-name = "vibr";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6359_vrf12_ldo_reg: ldo_vrf12 {
+          regulator-name = "vrf12";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1300000>;
+        };
+        mt6359_vusb_ldo_reg: ldo_vusb {
+          regulator-name = "vusb";
+          regulator-min-microvolt = <3000000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-enable-ramp-delay = <960>;
+          regulator-always-on;
+        };
+        mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 {
+          regulator-name = "vsram_proc2";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+          regulator-ramp-delay = <7500>;
+          regulator-enable-ramp-delay = <240>;
+          regulator-always-on;
+        };
+        mt6359_vio18_ldo_reg: ldo_vio18 {
+          regulator-name = "vio18";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1900000>;
+          regulator-enable-ramp-delay = <960>;
+          regulator-always-on;
+        };
+        mt6359_vcamio_ldo_reg: ldo_vcamio {
+          regulator-name = "vcamio";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1900000>;
+        };
+        mt6359_vcn18_ldo_reg: ldo_vcn18 {
+          regulator-name = "vcn18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vfe28_ldo_reg: ldo_vfe28 {
+          regulator-name = "vfe28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <120>;
+        };
+        mt6359_vcn13_ldo_reg: ldo_vcn13 {
+          regulator-name = "vcn13";
+          regulator-min-microvolt = <900000>;
+          regulator-max-microvolt = <1300000>;
+        };
+        mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt {
+          regulator-name = "vcn33_1_bt";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3500000>;
+        };
+        mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi {
+          regulator-name = "vcn33_1_wifi";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3500000>;
+        };
+        mt6359_vaux18_ldo_reg: ldo_vaux18 {
+          regulator-name = "vaux18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <240>;
+          regulator-always-on;
+        };
+        mt6359_vsram_others_ldo_reg: ldo_vsram_others {
+          regulator-name = "vsram_others";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+          regulator-ramp-delay = <5000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vefuse_ldo_reg: ldo_vefuse {
+          regulator-name = "vefuse";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <2000000>;
+        };
+        mt6359_vxo22_ldo_reg: ldo_vxo22 {
+          regulator-name = "vxo22";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <2200000>;
+          regulator-always-on;
+        };
+        mt6359_vrfck_ldo_reg: ldo_vrfck {
+          regulator-name = "vrfck";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <1700000>;
+        };
+        mt6359_vrfck_1_ldo_reg: ldo_vrfck_1 {
+          regulator-name = "vrfck";
+          regulator-min-microvolt = <1240000>;
+          regulator-max-microvolt = <1600000>;
+        };
+        mt6359_vbif28_ldo_reg: ldo_vbif28 {
+          regulator-name = "vbif28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vio28_ldo_reg: ldo_vio28 {
+          regulator-name = "vio28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-always-on;
+        };
+        mt6359_vemc_ldo_reg: ldo_vemc {
+          regulator-name = "vemc";
+          regulator-min-microvolt = <2900000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6359_vemc_1_ldo_reg: ldo_vemc_1 {
+          regulator-name = "vemc";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt {
+          regulator-name = "vcn33_2_bt";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3500000>;
+        };
+        mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi {
+          regulator-name = "vcn33_2_wifi";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3500000>;
+        };
+        mt6359_va12_ldo_reg: ldo_va12 {
+          regulator-name = "va12";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1300000>;
+          regulator-always-on;
+        };
+        mt6359_va09_ldo_reg: ldo_va09 {
+          regulator-name = "va09";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <1200000>;
+        };
+        mt6359_vrf18_ldo_reg: ldo_vrf18 {
+          regulator-name = "vrf18";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1810000>;
+        };
+        mt6359_vsram_md_ldo_reg: ldo_vsram_md {
+          regulator-name = "vsram_md";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+          regulator-ramp-delay = <10760>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vufs_ldo_reg: ldo_vufs {
+          regulator-name = "vufs";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1900000>;
+        };
+        mt6359_vm18_ldo_reg: ldo_vm18 {
+          regulator-name = "vm18";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1900000>;
+          regulator-always-on;
+        };
+        mt6359_vbbck_ldo_reg: ldo_vbbck {
+          regulator-name = "vbbck";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1200000>;
+        };
+        mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 {
+          regulator-name = "vsram_proc1";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+          regulator-ramp-delay = <7500>;
+          regulator-enable-ramp-delay = <240>;
+          regulator-always-on;
+        };
+        mt6359_vsim2_ldo_reg: ldo_vsim2 {
+          regulator-name = "vsim2";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub {
+          regulator-name = "vsram_others_sshub";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
new file mode 100644
index 000000000000..a462d99a25cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6360-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6360 Regulator from MediaTek Integrated
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  list of regulators provided by this controller, must be named
+  after their hardware counterparts buck1/2 or ldo1/2/3/5/6/7
+
+properties:
+  compatible:
+    const: mediatek,mt6360-regulator
+
+  LDO_VIN1-supply:
+    description: Input supply phandle(s) for LDO1/2/3
+  LDO_VIN2-supply:
+    description: Input supply phandle(s) for LDO5
+  LDO_VIN3-supply:
+    description: Input supply phandle(s) for LDO6/7
+
+patternProperties:
+  "^buck[12]$":
+    $ref: "regulator.yaml#"
+
+  "^ldo[123567]$":
+    $ref: "regulator.yaml#"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+    regulator {
+      compatible = "mediatek,mt6360-regulator";
+      LDO_VIN3-supply = <&BUCK2>;
+      buck1 {
+        regulator-compatible = "BUCK1";
+        regulator-name = "mt6360,buck1";
+        regulator-min-microvolt = <300000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP
+             MT6360_OPMODE_ULP>;
+      };
+      BUCK2: buck2 {
+        regulator-compatible = "BUCK2";
+        regulator-name = "mt6360,buck2";
+        regulator-min-microvolt = <300000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP
+             MT6360_OPMODE_ULP>;
+      };
+      ldo6 {
+        regulator-compatible = "LDO6";
+        regulator-name = "mt6360,ldo6";
+        regulator-min-microvolt = <500000>;
+        regulator-max-microvolt = <2100000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo7 {
+        regulator-compatible = "LDO7";
+        regulator-name = "mt6360,ldo7";
+        regulator-min-microvolt = <500000>;
+        regulator-max-microvolt = <2100000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo1 {
+        regulator-compatible = "LDO1";
+        regulator-name = "mt6360,ldo1";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+        ldo2 {
+        regulator-compatible = "LDO2";
+        regulator-name = "mt6360,ldo2";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo3 {
+        regulator-compatible = "LDO3";
+        regulator-name = "mt6360,ldo3";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo5 {
+        regulator-compatible = "LDO5";
+        regulator-name = "mt6360,ldo5";
+        regulator-min-microvolt = <2700000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
index 01141fb00875..c080086d3e62 100644
--- a/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
@@ -16,6 +16,9 @@ LDO:
   ldo_vemc3v3, ldo_vgp1, ldo_vgp2, ldo_vgp3, ldo_vgp4, ldo_vgp5, ldo_vgp6,
   ldo_vibr
 
+BUCK regulators can set regulator-initial-mode and regulator-allowed-modes to
+values specified in dt-bindings/regulator/mediatek,mt6397-regulator.h
+
 Example:
 	pmic {
 		compatible = "mediatek,mt6397";
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
new file mode 100644
index 000000000000..835b53302db8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/nxp,pca9450-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA9450A/B/C Power Management Integrated Circuit regulators
+
+maintainers:
+  - Robin Gong <yibin.gong@nxp.com>
+
+description: |
+  Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
+  definition for each of these nodes is defined using the standard
+  binding for regulators at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  Datasheet is available at
+  https://www.nxp.com/docs/en/data-sheet/PCA9450DS.pdf
+
+#The valid names for PCA9450 regulator nodes are:
+#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
+#LDO1, LDO2, LDO3, LDO4, LDO5
+#Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C.
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca9450a
+      - nxp,pca9450b
+      - nxp,pca9450c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller
+
+    patternProperties:
+      "^LDO[1-5]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single LDO regulator.
+
+        unevaluatedProperties: false
+
+      "^BUCK[1-6]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single BUCK regulator.
+
+        properties:
+          nxp,dvs-run-voltage:
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            minimum: 600000
+            maximum: 2187500
+            description:
+              PMIC default "RUN" state voltage in uV. Only Buck1~3 have such
+              dvs(dynamic voltage scaling) property.
+
+          nxp,dvs-standby-voltage:
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            minimum: 600000
+            maximum: 2187500
+            description:
+              PMIC default "STANDBY" state voltage in uV. Only Buck1~3 have such
+              dvs(dynamic voltage scaling) property.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+  sd-vsel-gpios:
+    description: GPIO that is used to switch LDO5 between being configured by
+      LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is
+      connected to a host GPIO.
+
+  nxp,i2c-lt-enable:
+    type: boolean
+    description:
+      Indicates that the I2C Level Translator is used.
+
+  nxp,wdog_b-warm-reset:
+    type: boolean
+    description:
+      When WDOG_B signal is asserted a warm reset will be done instead of cold
+      reset.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@25 {
+            compatible = "nxp,pca9450b";
+            reg = <0x25>;
+            pinctrl-0 = <&pinctrl_pmic>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                buck1: BUCK1 {
+                    regulator-name = "BUCK1";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <2187500>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <3125>;
+                };
+                buck2: BUCK2 {
+                    regulator-name = "BUCK2";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <2187500>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <3125>;
+                    nxp,dvs-run-voltage = <950000>;
+                    nxp,dvs-standby-voltage = <850000>;
+                };
+                buck4: BUCK4 {
+                    regulator-name = "BUCK4";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <3400000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                buck5: BUCK5 {
+                    regulator-name = "BUCK5";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <3400000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                buck6: BUCK6 {
+                    regulator-name = "BUCK6";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <3400000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo1: LDO1 {
+                    regulator-name = "LDO1";
+                    regulator-min-microvolt = <1600000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                ldo2: LDO2 {
+                    regulator-name = "LDO2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1150000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                ldo3: LDO3 {
+                    regulator-name = "LDO3";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                ldo4: LDO4 {
+                    regulator-name = "LDO4";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                ldo5: LDO5 {
+                    regulator-name = "LDO5";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
new file mode 100644
index 000000000000..aabf50f5b39e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/nxp,pf8x00-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PF8100/PF8121A/PF8200 PMIC regulators
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+  - Troy Kisky <troy.kisky@boundarydevices.com>
+
+description: |
+  PF8100/PF8121A/PF8200 is a PMIC designed for highperformance consumer
+  applications. It features seven high efficiency buck converters, four
+  linear and one vsnvs regulators. It has built-in one time programmable
+  fuse bank for device configurations.
+
+properties:
+  compatible:
+    enum:
+      - nxp,pf8100
+      - nxp,pf8121a
+      - nxp,pf8200
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller
+
+    patternProperties:
+      "^ldo[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single LDO regulator.
+
+        properties:
+          regulator-name:
+            pattern: "^ldo[1-4]$"
+            description:
+              should be "ldo1", ..., "ldo4"
+
+        unevaluatedProperties: false
+
+      "^buck[1-7]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single BUCK regulator.
+
+        properties:
+          regulator-name:
+            pattern: "^buck[1-7]$"
+            description:
+              should be "buck1", ..., "buck7"
+
+          nxp,ilim-ma:
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            minimum: 2100
+            maximum: 4500
+            deprecated: true
+            description:
+              BUCK regulators current limit in mA.
+              This property is deprecated, please use
+              "regulator-max-microamp" instead.
+
+              Listed current limits in mA are,
+              2100 (default)
+              2600
+              3000
+              4500
+
+          nxp,phase-shift:
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            default: 0
+            enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ]
+            description:
+              BUCK regulators phase shift control in degrees.
+
+        unevaluatedProperties: false
+
+    properties:
+      vsnvs:
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single VSNVS regulator.
+
+        properties:
+          regulator-name:
+            pattern: "^vsnvs$"
+            description:
+              should be "vsnvs"
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@8 {
+            compatible = "nxp,pf8100";
+            reg = <0x08>;
+
+            regulators {
+                reg_ldo1: ldo1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <5000000>;
+                    regulator-min-microvolt = <1500000>;
+                };
+
+                reg_ldo2: ldo2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <5000000>;
+                    regulator-min-microvolt = <1500000>;
+                };
+
+                reg_ldo3: ldo3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <5000000>;
+                    regulator-min-microvolt = <1500000>;
+                };
+
+                reg_ldo4: ldo4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <5000000>;
+                    regulator-min-microvolt = <1500000>;
+                };
+
+                reg_buck1: buck1 {
+                    nxp,ilim-ma = <4500>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-min-microvolt =  <400000>;
+                };
+
+                reg_buck2: buck2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-min-microvolt =  <400000>;
+                };
+
+                reg_buck3: buck3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-min-microvolt =  <400000>;
+                };
+
+                reg_buck4: buck4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-min-microvolt =  <400000>;
+                };
+
+                reg_buck5: buck5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-min-microvolt =  <400000>;
+                };
+
+                reg_buck6: buck6 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-min-microvolt =  <400000>;
+                };
+
+                reg_buck7: buck7 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-min-microvolt = <3300000>;
+                };
+
+                reg_vsnvs: vsnvs {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-min-microvolt = <1800000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml b/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml
new file mode 100644
index 000000000000..eb61e04ef852
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/onnn,fan53880.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Onsemi FAN53880 PMIC
+
+maintainers:
+  - Christoph Fritz <chf.fritz@googlemail.com>
+
+description: |
+  The FAN53880 is an I2C porgrammable power management IC (PMIC)
+  that contains a BUCK (step-down converter), four low dropouts (LDO)
+  and one BOOST (step-up converter) output. It is designed for mobile
+  power applications.
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - onnn,fan53880
+
+  reg:
+    maxItems: 1
+
+  VIN12-supply:
+    description: Input supply phandle(s) for LDO1 and LDO2
+
+  VIN3-supply:
+    description: Input supply phandle(s) for LDO3
+
+  VIN4-supply:
+    description: Input supply phandle(s) for LDO4
+
+  PVIN-supply:
+    description: Input supply phandle(s) for BUCK and BOOST
+
+  regulators:
+    type: object
+    $ref: regulator.yaml#
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts LDO[1-4], BUCK and BOOST
+
+    patternProperties:
+      "^LDO[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+
+      "^BUCK|BOOST$":
+        type: object
+        $ref: regulator.yaml#
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@35 {
+            compatible = "onnn,fan53880";
+            reg = <0x35>;
+
+            PVIN-supply = <&fixreg_example_vcc>;
+
+            regulators {
+                BUCK {
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+            };
+       };
+     };
+...
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
deleted file mode 100644
index 4d3b12b92cb3..000000000000
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ /dev/null
@@ -1,394 +0,0 @@
-PFUZE100 family of regulators
-
-Required properties:
-- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000", "fsl,pfuze3001"
-- reg: I2C slave address
-
-Optional properties:
-- fsl,pfuze-support-disable-sw: Boolean, if present disable all unused switch
-  regulators to save power consumption. Attention, ensure that all important
-  regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on"
-  property. If not present, the switched regulators are always on and can't be
-  disabled. This binding is a workaround to keep backward compatibility with
-  old dtb's which rely on the fact that the switched regulators are always on
-  and don't mark them explicit as "regulator-always-on".
-- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all
-  power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
-  Use this option if the SoC should be powered off by external power
-  management IC (PMIC) on PMIC_STBY_REQ signal.
-  As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
-
-Required child node:
-- regulators: This is the list of child nodes that specify the regulator
-  initialization data for defined regulators. Please refer to below doc
-  Documentation/devicetree/bindings/regulator/regulator.txt.
-
-  The valid names for regulators are:
-  --PFUZE100
-  sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
-  --PFUZE200
-  sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin
-  --PFUZE3000
-  sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
-  --PFUZE3001
-  sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4
-
-Each regulator is defined using the standard binding for regulators.
-
-Example 1: PFUZE100
-
-	pfuze100: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-
-Example 2: PFUZE200
-
-	pfuze200: pmic@8 {
-		compatible = "fsl,pfuze200";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			coin_reg: coin {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-Example 3: PFUZE3000
-
-	pfuze3000: pmic@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-Example 4: PFUZE 3001
-
-	pfuze3001: pmic@8 {
-		compatible = "fsl,pfuze3001";
-		reg = <0x08>;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
new file mode 100644
index 000000000000..a26bbd68b729
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/pfuze100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PFUZE100 family of regulators
+
+maintainers:
+  - Robin Gong <yibin.gong@nxp.com>
+
+description: |
+  The valid names for regulators are:
+  --PFUZE100
+  sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
+  --PFUZE200
+  sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin
+  --PFUZE3000
+  sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
+  --PFUZE3001
+  sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4
+
+  Each regulator is defined using the standard binding for regulators.
+
+properties:
+  $nodename:
+    pattern: "^pmic@[0-9]$"
+
+  compatible:
+    enum:
+      - fsl,pfuze100
+      - fsl,pfuze200
+      - fsl,pfuze3000
+      - fsl,pfuze3001
+
+  reg:
+    maxItems: 1
+
+  fsl,pfuze-support-disable-sw:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Boolean, if present disable all unused switch regulators to save power
+      consumption. Attention, ensure that all important regulators
+      (e.g. DDR ref, DDR supply) has set the "regulator-always-on" property.
+      If not present, the switched regulators are always on and can't be
+      disabled. This binding is a workaround to keep backward compatibility
+      with old dtb's which rely on the fact that the switched regulators are
+      always on and don't mark them explicit as "regulator-always-on".
+
+  fsl,pmic-stby-poweroff:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      if present, configure the PMIC to shutdown all
+      power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
+      Use this option if the SoC should be powered off by external power management
+      IC (PMIC) on PMIC_STBY_REQ signal.
+      As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller.
+
+    patternProperties:
+      "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$":
+        $ref: "regulator.yaml#"
+        type: object
+
+      "^vgen[1-6]$":
+        $ref: "regulator.yaml#"
+        type: object
+
+      "^vldo[1-4]$":
+        $ref: "regulator.yaml#"
+        type: object
+
+      "^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$":
+        $ref: "regulator.yaml#"
+        type: object
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@8 {
+            compatible = "fsl,pfuze100";
+            reg = <0x08>;
+
+            regulators {
+                sw1a_reg: sw1ab {
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1875000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <6250>;
+                };
+
+                sw1c_reg: sw1c {
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1875000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw2_reg: sw2 {
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw3a_reg: sw3a {
+                    regulator-min-microvolt = <400000>;
+                    regulator-max-microvolt = <1975000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw3b_reg: sw3b {
+                    regulator-min-microvolt = <400000>;
+                    regulator-max-microvolt = <1975000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw4_reg: sw4 {
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                swbst_reg: swbst {
+                    regulator-min-microvolt = <5000000>;
+                    regulator-max-microvolt = <5150000>;
+                };
+
+                snvs_reg: vsnvs {
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                vref_reg: vrefddr {
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                vgen1_reg: vgen1 {
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1550000>;
+                };
+
+                vgen2_reg: vgen2 {
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1550000>;
+                };
+
+                vgen3_reg: vgen3 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                vgen4_reg: vgen4 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                vgen5_reg: vgen5 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                vgen6_reg: vgen6 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
deleted file mode 100644
index 3d78d507e29f..000000000000
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Bindings for the Generic PWM Regulator
-======================================
-
-Currently supports 2 modes of operation:
-
-Voltage Table:		When in this mode, a voltage table (See below) of
-			predefined voltage <=> duty-cycle values must be
-			provided via DT. Limitations are that the regulator can
-			only operate at the voltages supplied in the table.
-			Intermediary duty-cycle values which would normally
-			allow finer grained voltage selection are ignored and
-			rendered useless.  Although more control is given to
-			the user if the assumptions made in continuous-voltage
-			mode do not reign true.
-
-Continuous Voltage:	This mode uses the regulator's maximum and minimum
-			supplied voltages specified in the
-			regulator-{min,max}-microvolt properties to calculate
-			appropriate duty-cycle values.  This allows for a much
-			more fine grained solution when compared with
-			voltage-table mode above.  This solution does make an
-			assumption that a %50 duty-cycle value will cause the
-			regulator voltage to run at half way between the
-			supplied max_uV and min_uV values.
-
-Required properties:
---------------------
-- compatible:		Should be "pwm-regulator"
-
-- pwms:			PWM specification (See: ../pwm/pwm.txt)
-
-Only required for Voltage Table Mode:
-- voltage-table: 	Voltage and Duty-Cycle table consisting of 2 cells
-			    First cell is voltage in microvolts (uV)
-			    Second cell is duty-cycle in percent (%)
-
-Optional properties for Continuous mode:
-- pwm-dutycycle-unit:	Integer value encoding the duty cycle unit. If not
-			defined, <100> is assumed, meaning that
-			pwm-dutycycle-range contains values expressed in
-			percent.
-
-- pwm-dutycycle-range:	Should contain 2 entries. The first entry is encoding
-			the dutycycle for regulator-min-microvolt and the
-			second one the dutycycle for regulator-max-microvolt.
-			Duty cycle values are expressed in pwm-dutycycle-unit.
-			If not defined, <0 100> is assumed.
-
-NB: To be clear, if voltage-table is provided, then the device will be used
-in Voltage Table Mode.  If no voltage-table is provided, then the device will
-be used in Continuous Voltage Mode.
-
-Optional properties:
---------------------
-- enable-gpios:		GPIO to use to enable/disable the regulator
-
-Any property defined as part of the core regulator binding can also be used.
-(See: ../regulator/regulator.txt)
-
-Continuous Voltage With Enable GPIO Example:
-	pwm_regulator {
-		compatible = "pwm-regulator";
-		pwms = <&pwm1 0 8448 0>;
-		enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-		regulator-min-microvolt = <1016000>;
-		regulator-max-microvolt = <1114000>;
-		regulator-name = "vdd_logic";
-		/* unit == per-mille */
-		pwm-dutycycle-unit = <1000>;
-		/*
-		 * Inverted PWM logic, and the duty cycle range is limited
-		 * to 30%-70%.
-		 */
-		pwm-dutycycle-range = <700 300>; /* */
-	};
-
-Voltage Table Example:
-	pwm_regulator {
-		compatible = "pwm-regulator";
-		pwms = <&pwm1 0 8448 0>;
-		regulator-min-microvolt = <1016000>;
-		regulator-max-microvolt = <1114000>;
-		regulator-name = "vdd_logic";
-
-			      /* Voltage Duty-Cycle */
-		voltage-table = <1114000 0>,
-				<1095000 10>,
-				<1076000 20>,
-				<1056000 30>,
-				<1036000 40>,
-				<1016000 50>;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
new file mode 100644
index 000000000000..82b6f2fde422
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/pwm-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for the Generic PWM Regulator
+
+maintainers:
+  - Brian Norris <briannorris@chromium.org>
+  - Lee Jones <lee@kernel.org>
+  - Alexandre Courbot <acourbot@nvidia.com>
+
+description: |
+  Currently supports 2 modes of operation:
+
+  Voltage Table:
+    When in this mode, a voltage table (See below) of predefined voltage <=>
+    duty-cycle values must be provided via DT. Limitations are that the
+    regulator can only operate at the voltages supplied in the table.
+    Intermediary duty-cycle values which would normally allow finer grained
+    voltage selection are ignored and rendered useless.  Although more control
+    is given to the user if the assumptions made in continuous-voltage mode do
+    not reign true.
+
+  Continuous Voltage:
+    This mode uses the regulator's maximum and minimum supplied voltages
+    specified in the regulator-{min,max}-microvolt properties to calculate
+    appropriate duty-cycle values.  This allows for a much more fine grained
+    solution when compared with voltage-table mode above.  This solution does
+    make an assumption that a %50 duty-cycle value will cause the regulator
+    voltage to run at half way between the supplied max_uV and min_uV values.
+
+  If voltage-table is provided, then the device will be used in Voltage Table
+  Mode.  If no voltage-table is provided, then the device will be used in
+  Continuous Voltage Mode.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: pwm-regulator
+
+  pwms:
+    maxItems: 1
+
+  voltage-table:
+    description: Voltage and Duty-Cycle table.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: voltage in microvolts (uV)
+        - description: duty-cycle in percent (%)
+
+  enable-gpios:
+    description: Regulator enable GPIO
+    maxItems: 1
+
+   # Optional properties for Continuous mode:
+  pwm-dutycycle-unit:
+    description:
+      Integer value encoding the duty cycle unit. If not
+        defined, <100> is assumed, meaning that
+        pwm-dutycycle-range contains values expressed in
+        percent.
+    default: 100
+
+  pwm-dutycycle-range:
+    description:
+      Should contain 2 entries. The first entry is encoding
+        the dutycycle for regulator-min-microvolt and the
+        second one the dutycycle for regulator-max-microvolt.
+        Duty cycle values are expressed in pwm-dutycycle-unit.
+        If not defined, <0 100> is assumed.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: the dutycycle for regulator-min-microvolt
+      - description: the dutycycle for regulator-max-microvolt
+    default: [ 0 100 ]
+
+required:
+  - compatible
+  - pwms
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    // Continuous Voltage With Enable GPIO Example:
+    regulator {
+        compatible = "pwm-regulator";
+        pwms = <&pwm1 0 8448 0>;
+        enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+        regulator-min-microvolt = <1016000>;
+        regulator-max-microvolt = <1114000>;
+        regulator-name = "vdd_logic";
+        /* unit == per-mille */
+        pwm-dutycycle-unit = <1000>;
+        /*
+        * Inverted PWM logic, and the duty cycle range is limited
+        * to 30%-70%.
+        */
+        pwm-dutycycle-range = <700 300>; /* */
+    };
+
+  - |
+    // Voltage Table Example:
+    regulator {
+        compatible = "pwm-regulator";
+        pwms = <&pwm1 0 8448 0>;
+        regulator-min-microvolt = <1016000>;
+        regulator-max-microvolt = <1114000>;
+        regulator-name = "vdd_logic";
+
+                /* Voltage Duty-Cycle */
+        voltage-table = <1114000 0>,
+            <1095000 10>,
+            <1076000 20>,
+            <1056000 30>,
+            <1036000 40>,
+            <1016000 50>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
deleted file mode 100644
index 97c3e0b7611c..000000000000
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
+++ /dev/null
@@ -1,171 +0,0 @@
-Qualcomm Technologies, Inc. RPMh Regulators
-
-rpmh-regulator devices support PMIC regulator management via the Voltage
-Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators.  The APPS
-processor communicates with these hardware blocks via a Resource State
-Coordinator (RSC) using command packets.  The VRM allows changing three
-parameters for a given regulator: enable state, output voltage, and operating
-mode.  The XOB allows changing only a single parameter for a given regulator:
-its enable state.  Despite its name, the XOB is capable of controlling the
-enable state of any PMIC peripheral.  It is used for clock buffers, low-voltage
-switches, and LDO/SMPS regulators which have a fixed voltage and mode.
-
-=======================
-Required Node Structure
-=======================
-
-RPMh regulators must be described in two levels of device nodes.  The first
-level describes the PMIC containing the regulators and must reside within an
-RPMh device node.  The second level describes each regulator within the PMIC
-which is to be used on the board.  Each of these regulators maps to a single
-RPMh resource.
-
-The names used for regulator nodes must match those supported by a given PMIC.
-Supported regulator node names:
-	PM8005:		smps1 - smps4
-	PM8009:		smps1 - smps2, ldo1 - ldo7
-	PM8150:		smps1 - smps10, ldo1 - ldo18
-	PM8150L:	smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
-	PM8998:		smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
-	PMI8998:	bob
-	PM6150:         smps1 - smps5, ldo1 - ldo19
-	PM6150L:        smps1 - smps8, ldo1 - ldo11, bob
-
-========================
-First Level Nodes - PMIC
-========================
-
-- compatible
-	Usage:      required
-	Value type: <string>
-	Definition: Must be one of below:
-		    "qcom,pm8005-rpmh-regulators"
-		    "qcom,pm8009-rpmh-regulators"
-		    "qcom,pm8150-rpmh-regulators"
-		    "qcom,pm8150l-rpmh-regulators"
-		    "qcom,pm8998-rpmh-regulators"
-		    "qcom,pmi8998-rpmh-regulators"
-		    "qcom,pm6150-rpmh-regulators"
-		    "qcom,pm6150l-rpmh-regulators"
-
-- qcom,pmic-id
-	Usage:      required
-	Value type: <string>
-	Definition: RPMh resource name suffix used for the regulators found on
-		    this PMIC.  Typical values: "a", "b", "c", "d", "e", "f".
-
-- vdd-s1-supply
-- vdd-s2-supply
-- vdd-s3-supply
-- vdd-s4-supply
-	Usage:      optional (PM8998 and PM8005 only)
-	Value type: <phandle>
-	Definition: phandle of the parent supply regulator of one or more of the
-		    regulators for this PMIC.
-
-- vdd-s5-supply
-- vdd-s6-supply
-- vdd-s7-supply
-- vdd-s8-supply
-- vdd-s9-supply
-- vdd-s10-supply
-- vdd-s11-supply
-- vdd-s12-supply
-- vdd-s13-supply
-- vdd-l1-l27-supply
-- vdd-l2-l8-l17-supply
-- vdd-l3-l11-supply
-- vdd-l4-l5-supply
-- vdd-l6-supply
-- vdd-l7-l12-l14-l15-supply
-- vdd-l9-supply
-- vdd-l10-l23-l25-supply
-- vdd-l13-l19-l21-supply
-- vdd-l16-l28-supply
-- vdd-l18-l22-supply
-- vdd-l20-l24-supply
-- vdd-l26-supply
-- vin-lvs-1-2-supply
-	Usage:      optional (PM8998 only)
-	Value type: <phandle>
-	Definition: phandle of the parent supply regulator of one or more of the
-		    regulators for this PMIC.
-
-- vdd-bob-supply
-	Usage:      optional (PMI8998 only)
-	Value type: <phandle>
-	Definition: BOB regulator parent supply phandle
-
-===============================
-Second Level Nodes - Regulators
-===============================
-
-- qcom,always-wait-for-ack
-	Usage:      optional
-	Value type: <empty>
-	Definition: Boolean flag which indicates that the application processor
-		    must wait for an ACK or a NACK from RPMh for every request
-		    sent for this regulator including those which are for a
-		    strictly lower power state.
-
-Other properties defined in Documentation/devicetree/bindings/regulator/regulator.txt
-may also be used.  regulator-initial-mode and regulator-allowed-modes may be
-specified for VRM regulators using mode values from
-include/dt-bindings/regulator/qcom,rpmh-regulator.h.  regulator-allow-bypass
-may be specified for BOB type regulators managed via VRM.
-regulator-allow-set-load may be specified for LDO type regulators managed via
-VRM.
-
-========
-Examples
-========
-
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
-&apps_rsc {
-	pm8998-rpmh-regulators {
-		compatible = "qcom,pm8998-rpmh-regulators";
-		qcom,pmic-id = "a";
-
-		vdd-l7-l12-l14-l15-supply = <&pm8998_s5>;
-
-		smps2 {
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-		};
-
-		pm8998_s5: smps5 {
-			regulator-min-microvolt = <1904000>;
-			regulator-max-microvolt = <2040000>;
-		};
-
-		ldo7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allowed-modes =
-				<RPMH_REGULATOR_MODE_LPM
-				 RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		lvs1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-	};
-
-	pmi8998-rpmh-regulators {
-		compatible = "qcom,pmi8998-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		bob {
-			regulator-min-microvolt = <3312000>;
-			regulator-max-microvolt = <3600000>;
-			regulator-allowed-modes =
-				<RPMH_REGULATOR_MODE_AUTO
-				 RPMH_REGULATOR_MODE_HPM>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
new file mode 100644
index 000000000000..90c3bda31c23
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -0,0 +1,440 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,rpmh-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. RPMh Regulators
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+    rpmh-regulator devices support PMIC regulator management via the Voltage
+    Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators.
+    The APPS processor communicates with these hardware blocks via a
+    Resource State Coordinator (RSC) using command packets.  The VRM allows
+    changing three parameters for a given regulator, enable state, output
+    voltage, and operating mode.  The XOB allows changing only a single
+    parameter for a given regulator, its enable state.  Despite its name,
+    the XOB is capable of controlling the enable state of any PMIC peripheral.
+    It is used for clock buffers, low-voltage switches, and LDO/SMPS regulators
+    which have a fixed voltage and mode.
+
+    =======================
+    Required Node Structure
+    =======================
+
+    RPMh regulators must be described in two levels of device nodes.  The first
+    level describes the PMIC containing the regulators and must reside within an
+    RPMh device node.  The second level describes each regulator within the PMIC
+    which is to be used on the board.  Each of these regulators maps to a single
+    RPMh resource.
+
+    The names used for regulator nodes must match those supported by a given
+    PMIC. Supported regulator node names are
+      For PM6150, smps1 - smps5, ldo1 - ldo19
+      For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
+      For PM6350, smps1 - smps5, ldo1 - ldo22
+      For PM660, smps1 - smps6, ldo1 - ldo3, ldo5 - ldo19
+      For PM660L, smps1 - smps3, smps5, ldo1 - ldo8, bob
+      For PM7325, smps1 - smps8, ldo1 - ldo19
+      For PM8005, smps1 - smps4
+      For PM8009, smps1 - smps2, ldo1 - ldo7
+      For PM8150, smps1 - smps10, ldo1 - ldo18
+      For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
+      For PM8350, smps1 - smps12, ldo1 - ldo10
+      For PM8350C, smps1 - smps10, ldo1 - ldo13, bob
+      For PM8450, smps1 - smps6, ldo1 - ldo4
+      For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
+      For PMI8998, bob
+      For PMR735A, smps1 - smps3, ldo1 - ldo7
+      For PMX55, smps1 - smps7, ldo1 - ldo16
+      For PMX65, smps1 - smps8, ldo1 - ldo21
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm6150-rpmh-regulators
+      - qcom,pm6150l-rpmh-regulators
+      - qcom,pm6350-rpmh-regulators
+      - qcom,pm660-rpmh-regulators
+      - qcom,pm660l-rpmh-regulators
+      - qcom,pm7325-rpmh-regulators
+      - qcom,pm8005-rpmh-regulators
+      - qcom,pm8009-rpmh-regulators
+      - qcom,pm8009-1-rpmh-regulators
+      - qcom,pm8150-rpmh-regulators
+      - qcom,pm8150l-rpmh-regulators
+      - qcom,pm8350-rpmh-regulators
+      - qcom,pm8350c-rpmh-regulators
+      - qcom,pm8450-rpmh-regulators
+      - qcom,pm8998-rpmh-regulators
+      - qcom,pmg1110-rpmh-regulators
+      - qcom,pmi8998-rpmh-regulators
+      - qcom,pmm8155au-rpmh-regulators
+      - qcom,pmr735a-rpmh-regulators
+      - qcom,pmx55-rpmh-regulators
+      - qcom,pmx65-rpmh-regulators
+
+  qcom,pmic-id:
+    description: |
+        RPMh resource name suffix used for the regulators found
+        on this PMIC.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [a, b, c, d, e, f, h, k]
+
+  qcom,always-wait-for-ack:
+    description: |
+        Boolean flag which indicates that the application processor
+        must wait for an ACK or a NACK from RPMh for every request
+        sent for this regulator including those which are for a
+        strictly lower power state.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  vdd-flash-supply:
+    description: Input supply phandle of flash.
+
+  vdd-rgb-supply:
+    description: Input supply phandle of rgb.
+
+  bob:
+    type: object
+    $ref: "regulator.yaml#"
+    description: BOB regulator node.
+    dependencies:
+      regulator-allow-set-load: ["regulator-allowed-modes"]
+
+patternProperties:
+  "^(smps|ldo|lvs)[0-9]+$":
+    type: object
+    $ref: "regulator.yaml#"
+    description: smps/ldo regulator nodes(s).
+    dependencies:
+      regulator-allow-set-load: ["regulator-allowed-modes"]
+
+required:
+  - compatible
+  - qcom,pmic-id
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm6150-rpmh-regulators
+    then:
+      properties:
+        vdd-l2-l3-supply: true
+        vdd-l4-l7-l8-supply: true
+        vdd-l5-l16-l17-l18-l19-supply: true
+        vdd-l10-l14-l15-supply: true
+        vdd-l11-l12-l13-supply: true
+      patternProperties:
+        "^vdd-l[169]-supply$": true
+        "^vdd-s[1-5]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm6150l-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l8-supply: true
+        vdd-l2-l3-supply: true
+        vdd-l4-l5-l6-supply: true
+        vdd-l7-l11-supply: true
+        vdd-l9-l10-supply: true
+      patternProperties:
+        "^vdd-s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm660-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l6-l7-supply: true
+        vdd-l2-l3-supply: true
+        vdd-l5-supply: true
+        vdd-l8-l9-l10-l11-l12-l13-l14-supply: true
+        vdd-l15-l16-l17-l18-l19-supply: true
+      patternProperties:
+        "^vdd-s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm660l-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l9-l10-supply: true
+        vdd-l2-supply: true
+        vdd-l3-l5-l7-l8-supply: true
+        vdd-l4-l6-supply: true
+        vdd-s3-s4-supply: true
+      patternProperties:
+        "^vdd-s[125]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm7325-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l4-l12-l15-supply: true
+        vdd-l2-l7-supply: true
+        vdd-l6-l9-l10-supply: true
+        vdd-l11-l17-l18-l19-supply: true
+        vdd-l13-supply: true
+        vdd-l14-l16-supply: true
+      patternProperties:
+        "^vdd-l[358]-supply$": true
+        "^vdd-s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8005-rpmh-regulators
+    then:
+      patternProperties:
+        "^vdd-s[1-4]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8009-rpmh-regulators
+            - qcom,pm8009-1-rpmh-regulators
+    then:
+      properties:
+        vdd-l5-l6-supply: true
+      patternProperties:
+        "^vdd-l[1-47]-supply$": true
+        "^vdd-s[1-2]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8150-rpmh-regulators
+            - qcom,pmm8155au-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l8-l11-supply: true
+        vdd-l2-l10-supply: true
+        vdd-l3-l4-l5-l18-supply: true
+        vdd-l6-l9-supply: true
+        vdd-l7-l12-l14-l15-supply: true
+        vdd-l13-l16-l17-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|10)-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8150l-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l8-supply: true
+        vdd-l2-l3-supply: true
+        vdd-l4-l5-l6-supply: true
+        vdd-l7-l11-supply: true
+        vdd-l9-l10-supply: true
+      patternProperties:
+        "^vdd-s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8350-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l4-supply: true
+        vdd-l2-l7-supply: true
+        vdd-l3-l5-supply: true
+        vdd-l6-l9-l10-supply: true
+        vdd-l8-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|1[0-2])-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8350c-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l12-supply: true
+        vdd-l2-l8-supply: true
+        vdd-l3-l4-l5-l7-l13-supply: true
+        vdd-l6-l9-l11-supply: true
+        vdd-l10-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|10)-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8450-rpmh-regulators
+    then:
+      patternProperties:
+        "^vdd-l[1-4]-supply$": true
+        "^vdd-s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8998-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l27-supply: true
+        vdd-l2-l8-l17-supply: true
+        vdd-l3-l11-supply: true
+        vdd-l4-l5-supply: true
+        vdd-l6-supply: true
+        vdd-l7-l12-l14-l15-supply: true
+        vdd-l9-supply: true
+        vdd-l10-l23-l25-supply: true
+        vdd-l13-l19-l21-supply: true
+        vdd-l16-l28-supply: true
+        vdd-l18-l22-supply: true
+        vdd-l20-l24-supply: true
+        vdd-l26-supply: true
+        vin-lvs-1-2-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|1[0-3])-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmg1110-rpmh-regulators
+    then:
+      properties:
+        vdd-s1-supply: true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmi8998-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmr735a-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l2-supply: true
+        vdd-l3-supply: true
+        vdd-l4-supply: true
+        vdd-l5-l6-supply: true
+        vdd-l7-bob-supply: true
+      patternProperties:
+        "^vdd-s[1-3]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmx55-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l2-supply: true
+        vdd-l3-l9-supply: true
+        vdd-l4-l12-supply: true
+        vdd-l5-l6-supply: true
+        vdd-l7-l8-supply: true
+        vdd-l10-l11-l13-supply: true
+      patternProperties:
+        "^vdd-l1[4-6]-supply$": true
+        "^vdd-s[1-7]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmx65-rpmh-regulators
+    then:
+      properties:
+        vdd-l2-l18-supply: true
+        vdd-l5-l6-l16-supply: true
+        vdd-l8-l9-supply: true
+        vdd-l11-l13-supply: true
+      patternProperties:
+        "^vdd-l[1347]-supply$": true
+        "^vdd-l1[0245789]-supply$": true
+        "^vdd-l2[01]-supply$": true
+        "^vdd-s[1-8]-supply$": true
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+    pm8998-rpmh-regulators {
+        compatible = "qcom,pm8998-rpmh-regulators";
+        qcom,pmic-id = "a";
+
+        vdd-l7-l12-l14-l15-supply = <&pm8998_s5>;
+
+        smps2 {
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1100000>;
+        };
+
+        ldo7 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+            regulator-allowed-modes =
+                <RPMH_REGULATOR_MODE_LPM
+                 RPMH_REGULATOR_MODE_HPM>;
+            regulator-allow-set-load;
+        };
+
+        lvs1 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+        };
+    };
+
+    pmi8998-rpmh-regulators {
+        compatible = "qcom,pmi8998-rpmh-regulators";
+        qcom,pmic-id = "b";
+
+        bob {
+            regulator-min-microvolt = <3312000>;
+            regulator-max-microvolt = <3600000>;
+            regulator-allowed-modes =
+                <RPMH_REGULATOR_MODE_AUTO
+                 RPMH_REGULATOR_MODE_HPM>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
deleted file mode 100644
index d126df043403..000000000000
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
+++ /dev/null
@@ -1,307 +0,0 @@
-QCOM SMD RPM REGULATOR
-
-The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM.
-Because SMD is used as the communication transport mechanism, the RPM resides as
-a subnode of the SMD.  As such, the SMD-RPM regulator requires that the SMD and
-RPM nodes be present.
-
-Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for
-information pertaining to the SMD node.
-
-Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt for
-information regarding the RPM node.
-
-== Regulator
-
-Regulator nodes are identified by their compatible:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,rpm-pm8841-regulators"
-		    "qcom,rpm-pm8916-regulators"
-		    "qcom,rpm-pm8941-regulators"
-		    "qcom,rpm-pm8950-regulators"
-		    "qcom,rpm-pm8994-regulators"
-		    "qcom,rpm-pm8998-regulators"
-		    "qcom,rpm-pma8084-regulators"
-		    "qcom,rpm-pmi8998-regulators"
-		    "qcom,rpm-pms405-regulators"
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-	Usage: optional (pm8841 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_l1_l2_l3-supply:
-- vdd_l4_l5_l6-supply:
-- vdd_l7-supply:
-- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18-supply:
-	Usage: optional (pm8916 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_l1_l19-supply:
-- vdd_l2_l23-supply:
-- vdd_l3-supply:
-- vdd_l4_l5_l6_l7_l16-supply:
-- vdd_l8_l11_l12_l17_l22-supply:
-- vdd_l9_l10_l13_l14_l15_l18-supply:
-- vdd_l20-supply:
-- vdd_l21-supply:
-	Usage: optional (pm8950 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_l1_l3-supply:
-- vdd_l2_lvs1_2_3-supply:
-- vdd_l4_l11-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l14_l15-supply:
-- vdd_l8_l16_l18_l19-supply:
-- vdd_l9_l10_l17_l22-supply:
-- vdd_l13_l20_l23_l24-supply:
-- vdd_l21-supply:
-- vin_5vs-supply:
-	Usage: optional (pm8941 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vdd_s9-supply:
-- vdd_s10-supply:
-- vdd_s11-supply:
-- vdd_s12-supply:
-- vdd_l1-supply:
-- vdd_l2_l26_l28-supply:
-- vdd_l3_l11-supply:
-- vdd_l4_l27_l31-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l32-supply:
-- vdd_l5_l7-supply:
-- vdd_l8_l16_l30-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l3_l11-supply:
-- vdd_l6_l12_l32-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l14_l15-supply:
-- vdd_l14_l15-supply:
-- vdd_l8_l16_l30-supply:
-- vdd_l17_l29-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l20_l21-supply:
-- vdd_l20_l21-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l25-supply:
-- vdd_l2_l26_l28-supply:
-- vdd_l4_l27_l31-supply:
-- vdd_l2_l26_l28-supply:
-- vdd_l17_l29-supply:
-- vdd_l8_l16_l30-supply:
-- vdd_l4_l27_l31-supply:
-- vdd_l6_l12_l32-supply:
-- vdd_lvs1_2-supply:
-	Usage: optional (pm8994 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vdd_s9-supply:
-- vdd_s10-supply:
-- vdd_s11-supply:
-- vdd_s12-supply:
-- vdd_s13-supply:
-- vdd_l1_l27-supply:
-- vdd_l20_l24-supply:
-- vdd_l26-supply:
-- vdd_l2_l8_l17-supply:
-- vdd_l3_l11-supply:
-- vdd_l4_l5-supply:
-- vdd_l6-supply:
-- vdd_l7_l12_l14_l15-supply:
-- vdd_l9-supply:
-- vdd_l10_l23_l25-supply:
-- vdd_l13_l19_l21-supply:
-- vdd_l16_l28-supply:
-- vdd_l18_l22-supply:
-- vdd_lvs1_lvs2-supply:
-	Usage: optional (pmi8998 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vdd_s9-supply:
-- vdd_s10-supply:
-- vdd_s11-supply:
-- vdd_s12-supply:
-- vdd_l1_l11-supply:
-- vdd_l2_l3_l4_l27-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l14_l15_l26-supply:
-- vdd_l8-supply:
-- vdd_l9_l10_l13_l20_l23_l24-supply:
-- vdd_l16_l25-supply:
-- vdd_l17-supply:
-- vdd_l18-supply:
-- vdd_l19-supply:
-- vdd_l21-supply:
-- vdd_l22-supply:
-	Usage: optional (pma8084 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_bob-supply:
-	Usage: optional (pmi8998 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_l1_l2-supply:
-- vdd_l3_l8-supply:
-- vdd_l4-supply:
-- vdd_l5_l6-supply:
-- vdd_l7-supply:
-- vdd_l3_l8-supply:
-- vdd_l9-supply:
-- vdd_l10_l11_l12_l13-supply:
-	Usage: optional (pms405 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-The regulator node houses sub-nodes for each regulator within the device. Each
-sub-node is identified using the node's name, with valid values listed for each
-of the pmics below.
-
-pm8841:
-	s1, s2, s3, s4, s5, s6, s7, s8
-
-pm8916:
-	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
-	l14, l15, l16, l17, l18
-
-pm8941:
-	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
-	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
-	lvs3, 5vs1, 5vs2
-
-pm8994:
-	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
-	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
-	l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
-
-pm8998:
-	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2, l3, l4,
-	l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
-	l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2
-
-pma8084:
-	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
-	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
-	l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
-
-pmi8998:
-	bob
-
-pms405:
-	s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12,
-	l13
-
-The content of each sub-node is defined by the standard binding for regulators -
-see regulator.txt.
-
-= EXAMPLE
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8974";
-				qcom,smd-channels = "rpm_requests";
-
-				pm8941-regulators {
-					compatible = "qcom,rpm-pm8941-regulators";
-					vdd_l13_l20_l23_l24-supply = <&pm8941_boost>;
-
-					pm8941_s3: s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pm8941_boost: s4 {
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-					};
-
-					pm8941_l20: l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-					};
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
new file mode 100644
index 000000000000..961eed51912c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,smd-rpm-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM SMD RPM REGULATOR
+
+description:
+  The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM.
+  Because SMD is used as the communication transport mechanism, the RPM
+  resides as a subnode of the SMD.  As such, the SMD-RPM regulator requires
+  that the SMD and RPM nodes be present.
+
+  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml for
+  information pertaining to the SMD node.
+
+  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+  for information regarding the RPM node.
+
+  The regulator node houses sub-nodes for each regulator within the device.
+  Each sub-node is identified using the node's name, with valid values listed
+  for each of the pmics below.
+
+  For mp5496, s2
+
+  For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
+
+  For pm6125 s1, s2, s3, s4, s5, s6, s7, s8, l1, l2, l3, l5, l6, l7, l8, l9,
+  l10, l22, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24
+
+  For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22,
+  l12, l13, l14, l15, l16, l17, l18, l19
+
+  For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob
+
+  For pm8226, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10,
+  l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25,
+  l26, l27, l28, lvs1
+
+  For pm8841, s1, s2, s3, s4, s5, s6, s7, s8
+
+  For pm8909, s1, s2, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+  l14, l15, l17, l18
+
+  For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13, l14, l15, l16, l17, l18
+
+  For pm8941, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
+  lvs3, 5vs1, 5vs2
+
+  For pm8950 and pm8953, s1, s2, s3, s4, s5, s6, s7, l1, l2, l3, l4, l5, l6,
+  l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22,
+  l23
+
+  For pm8994, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3,
+  l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
+  l20, l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
+
+  For pm8998, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2,
+  l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
+  l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2
+
+  For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3,
+  l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
+  l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
+
+  For pmi8994, s1, s2, s3, boost-bypass
+
+  For pmi8998, bob
+
+  For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpm-mp5496-regulators
+      - qcom,rpm-pm2250-regulators
+      - qcom,rpm-pm6125-regulators
+      - qcom,rpm-pm660-regulators
+      - qcom,rpm-pm660l-regulators
+      - qcom,rpm-pm8226-regulators
+      - qcom,rpm-pm8841-regulators
+      - qcom,rpm-pm8909-regulators
+      - qcom,rpm-pm8916-regulators
+      - qcom,rpm-pm8941-regulators
+      - qcom,rpm-pm8950-regulators
+      - qcom,rpm-pm8953-regulators
+      - qcom,rpm-pm8994-regulators
+      - qcom,rpm-pm8998-regulators
+      - qcom,rpm-pma8084-regulators
+      - qcom,rpm-pmi8994-regulators
+      - qcom,rpm-pmi8998-regulators
+      - qcom,rpm-pms405-regulators
+
+patternProperties:
+  ".*-supply$":
+    description: Input supply phandle(s) for this node
+
+  "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$":
+    description: List of regulators and its properties
+    $ref: regulator.yaml#
+
+additionalProperties: false
+
+required:
+  - compatible
+
+examples:
+  - |
+    pm8941-regulators {
+        compatible = "qcom,rpm-pm8941-regulators";
+        vdd_l13_l20_l23_l24-supply = <&pm8941_boost>;
+
+        pm8941_s3: s3 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+        };
+
+        pm8941_boost: s4 {
+            regulator-min-microvolt = <5000000>;
+            regulator-max-microvolt = <5000000>;
+        };
+
+        pm8941_l20: l20 {
+            regulator-min-microvolt = <2950000>;
+            regulator-max-microvolt = <2950000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
deleted file mode 100644
index 8b005192f6e8..000000000000
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ /dev/null
@@ -1,315 +0,0 @@
-Qualcomm SPMI Regulators
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-			"qcom,pm8004-regulators"
-			"qcom,pm8005-regulators"
-			"qcom,pm8841-regulators"
-			"qcom,pm8916-regulators"
-			"qcom,pm8941-regulators"
-			"qcom,pm8950-regulators"
-			"qcom,pm8994-regulators"
-			"qcom,pmi8994-regulators"
-			"qcom,pms405-regulators"
-
-- interrupts:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: List of OCP interrupts.
-
-- interrupt-names:
-	Usage: required if 'interrupts' property present
-	Value type: <string-array>
-	Definition: List of strings defining the names of the
-		    interrupts in the 'interrupts' property 1-to-1.
-		    Supported values are "ocp-<regulator_name>", where
-		    <regulator_name> corresponds to a voltage switch
-		    type regulator.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-	Usage: optional (pm8841 only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_l1_l3-supply:
-- vdd_l2-supply:
-- vdd_l4_l5_l6-supply:
-- vdd_l7-supply:
-- vdd_l8_l11_l14_l15_l16-supply:
-- vdd_l9_l10_l12_l13_l17_l18-supply:
-	Usage: optional (pm8916 only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_l1_l3-supply:
-- vdd_l2_lvs_1_2_3-supply:
-- vdd_l4_l11-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l14_l15-supply:
-- vdd_l8_l16_l18_19-supply:
-- vdd_l9_l10_l17_l22-supply:
-- vdd_l13_l20_l23_l24-supply:
-- vdd_l21-supply:
-- vin_5vs-supply:
-	Usage: optional (pm8941 only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_l1_l19-supply:
-- vdd_l2_l23-supply:
-- vdd_l3-supply:
-- vdd_l4_l5_l6_l7_l16-supply:
-- vdd_l8_l11_l12_l17_l22-supply:
-- vdd_l9_l10_l13_l14_l15_l18-supply:
-- vdd_l20-supply:
-- vdd_l21-supply:
-	Usage: optional (pm8950 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vdd_s9-supply:
-- vdd_s10-supply:
-- vdd_s11-supply:
-- vdd_s12-supply:
-- vdd_l1-supply:
-- vdd_l2_l26_l28-supply:
-- vdd_l3_l11-supply:
-- vdd_l4_l27_l31-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l32-supply:
-- vdd_l8_l16_l30-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l14_l15-supply:
-- vdd_l17_l29-supply:
-- vdd_l20_l21-supply:
-- vdd_l25-supply:
-- vdd_lvs_1_2-supply:
-	Usage: optional (pm8994 only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_l1-supply:
-	Usage: optional (pmi8994 only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- vdd_l1_l2-supply:
-- vdd_l3_l8-supply:
-- vdd_l4-supply:
-- vdd_l5_l6-supply:
-- vdd_l10_l11_l12_l13-supply:
-- vdd_l7-supply:
-- vdd_l9-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply
-	Usage: optional (pms405 only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- qcom,saw-reg:
-	Usage: optional
-	Value type: <phandle>
-	Description: Reference to syscon node defining the SAW registers.
-
-
-The regulator node houses sub-nodes for each regulator within the device. Each
-sub-node is identified using the node's name, with valid values listed for each
-of the PMICs below.
-
-pm8004:
-	s2, s5
-
-pm8005:
-	s1, s2, s3, s4
-
-pm8841:
-	s1, s2, s3, s4, s5, s6, s7, s8
-
-pm8916:
-	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
-	l14, l15, l16, l17, l18
-
-pm8941:
-	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
-	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
-	5vs1, 5vs2
-
-pm8994:
-	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
-	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
-	l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
-
-pmi8994:
-	s1, s2, s3, l1
-
-The content of each sub-node is defined by the standard binding for regulators -
-see regulator.txt - with additional custom properties described below:
-
-- regulator-initial-mode:
-	Usage: optional
-	Value type: <u32>
-	Description: 2 = Set initial mode to auto mode (automatically select
-		    between HPM and LPM); not available on boost type
-		    regulators.
-
-		    1 = Set initial mode to high power mode (HPM), also referred
-		    to as NPM. HPM consumes more ground current than LPM, but
-		    it can source significantly higher load current. HPM is not
-		    available on boost type regulators. For voltage switch type
-		    regulators, HPM implies that over current protection and
-		    soft start are active all the time.
-
-		    0 = Set initial mode to low power mode (LPM).
-
-- qcom,ocp-max-retries:
-	Usage: optional
-	Value type: <u32>
-	Description: Maximum number of times to try toggling a voltage switch
-		     off and back on as a result of consecutive over current
-		     events.
-
-- qcom,ocp-retry-delay:
-	Usage: optional
-	Value type: <u32>
-	Description: Time to delay in milliseconds between each voltage switch
-		     toggle after an over current event takes place.
-
-- qcom,pin-ctrl-enable:
-	Usage: optional
-	Value type: <u32>
-	Description: Bit mask specifying which hardware pins should be used to
-		     enable the regulator, if any; supported bits are:
-			0 = ignore all hardware enable signals
-			BIT(0) = follow HW0_EN signal
-			BIT(1) = follow HW1_EN signal
-			BIT(2) = follow HW2_EN signal
-			BIT(3) = follow HW3_EN signal
-
-- qcom,pin-ctrl-hpm:
-	Usage: optional
-	Value type: <u32>
-	Description: Bit mask specifying which hardware pins should be used to
-		     force the regulator into high power mode, if any;
-		     supported bits are:
-			0 = ignore all hardware enable signals
-			BIT(0) = follow HW0_EN signal
-			BIT(1) = follow HW1_EN signal
-			BIT(2) = follow HW2_EN signal
-			BIT(3) = follow HW3_EN signal
-			BIT(4) = follow PMIC awake state
-
-- qcom,vs-soft-start-strength:
-	Usage: optional
-	Value type: <u32>
-	Description: This property sets the soft start strength for voltage
-		     switch type regulators; supported values are:
-			0 = 0.05 uA
-			1 = 0.25 uA
-			2 = 0.55 uA
-			3 = 0.75 uA
-
-- qcom,saw-slave:
-	Usage: optional
-	Value type: <boo>
-	Description: SAW controlled gang slave. Will not be configured.
-
-- qcom,saw-leader:
-	Usage: optional
-	Value type: <boo>
-	Description: SAW controlled gang leader. Will be configured as
-		     SAW regulator.
-
-Example:
-
-	regulators {
-		compatible = "qcom,pm8941-regulators";
-		vdd_l1_l3-supply = <&s1>;
-
-		s1: s1 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1400000>;
-		};
-
-		...
-
-		l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		....
-	};
-
-Example 2:
-
-	saw3: syscon@9A10000 {
-		compatible = "syscon";
-		reg = <0x9A10000 0x1000>;
-	};
-
-	...
-
-	spm-regulators {
-		compatible = "qcom,pm8994-regulators";
-		qcom,saw-reg = <&saw3>;
-		s8 {
-			qcom,saw-slave;
-		};
-		s9 {
-			qcom,saw-slave;
-		};
-		s10 {
-			qcom,saw-slave;
-		};
-		pm8994_s11_saw: s11 {
-			qcom,saw-leader;
-			regulator-always-on;
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1140000>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
new file mode 100644
index 000000000000..bdf34c2de96b
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
@@ -0,0 +1,354 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,spmi-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI Regulators
+
+maintainers:
+  - Robert Marko <robimarko@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm6125-regulators
+      - qcom,pm660-regulators
+      - qcom,pm660l-regulators
+      - qcom,pm8004-regulators
+      - qcom,pm8005-regulators
+      - qcom,pm8226-regulators
+      - qcom,pm8841-regulators
+      - qcom,pm8916-regulators
+      - qcom,pm8941-regulators
+      - qcom,pm8950-regulators
+      - qcom,pm8994-regulators
+      - qcom,pmi8994-regulators
+      - qcom,pmp8074-regulators
+      - qcom,pms405-regulators
+
+  qcom,saw-reg:
+    description: Reference to syscon node defining the SAW registers
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+patternProperties:
+  "^(5vs[1-2]|(l|s)[1-9][0-9]?|lvs[1-3])$":
+    description: List of regulators and its properties
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      qcom,ocp-max-retries:
+        description:
+          Maximum number of times to try toggling a voltage switch off and
+          back on as a result of consecutive over current events
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      qcom,ocp-retry-delay:
+        description:
+          Time to delay in milliseconds between each voltage switch toggle
+          after an over current event takes place
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      qcom,pin-ctrl-enable:
+        description:
+          Bit mask specifying which hardware pins should be used to enable the
+          regulator, if any.
+          Supported bits are
+          0 = ignore all hardware enable signals
+          BIT(0) = follow HW0_EN signal
+          BIT(1) = follow HW1_EN signal
+          BIT(2) = follow HW2_EN signal
+          BIT(3) = follow HW3_EN signal
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+
+      qcom,pin-ctrl-hpm:
+        description:
+          Bit mask specifying which hardware pins should be used to force the
+          regulator into high power mode, if any.
+          Supported bits are
+          0 = ignore all hardware enable signals
+          BIT(0) = follow HW0_EN signal
+          BIT(1) = follow HW1_EN signal
+          BIT(2) = follow HW2_EN signal
+          BIT(3) = follow HW3_EN signal
+          BIT(4) = follow PMIC awake state
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+
+      qcom,vs-soft-start-strength:
+        description:
+          This property sets the soft start strength for voltage switch type
+          regulators.
+          Supported values are
+          0 = 0.05 uA
+          1 = 0.25 uA
+          2 = 0.55 uA
+          3 = 0.75 uA
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+
+      qcom,saw-slave:
+        description: SAW controlled gang slave. Will not be configured.
+        type: boolean
+
+      qcom,saw-leader:
+        description:
+          SAW controlled gang leader. Will be configured as SAW regulator.
+        type: boolean
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm6125-regulators
+    then:
+      properties:
+        vdd_l1_l7_l17_l18-supply: true
+        vdd_l2_l3_l4-supply: true
+        vdd_l5_l15_l19_l20_l21_l22-supply: true
+        vdd_l6_l8-supply: true
+        vdd_l9_l11-supply: true
+        vdd_l10_l13_l14-supply: true
+        vdd_l12_l16-supply: true
+        vdd_l23_l24-supply: true
+      patternProperties:
+        "^vdd_s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660-regulators
+    then:
+      properties:
+        vdd_l15_l16_l17_l18_l19-supply: true
+        vdd_l1_l6_l7-supply: true
+        vdd_l2_l3-supply: true
+        vdd_l5-supply: true
+        vdd_l8_l9_l10_l11_l12_l13_l14-supply: true
+      patternProperties:
+        "^vdd_s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660l-regulators
+    then:
+      properties:
+        vdd_l1_l9_l10-supply: true
+        vdd_l2-supply: true
+        vdd_l3_l5_l7_l8-supply: true
+        vdd_l4_l6-supply: true
+      patternProperties:
+        "^vdd_s[1-5]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8004-regulators
+    then:
+      patternProperties:
+        "^vdd_s[25]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8005-regulators
+    then:
+      patternProperties:
+        "^vdd_s[1-4]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8226-regulators
+    then:
+      properties:
+        vdd_l10_l11_l13-supply: true
+        vdd_l12_l14-supply: true
+        vdd_l15_l16_l17_l18-supply: true
+        vdd_l19_l20_l21_l22_l23_l28-supply: true
+        vdd_l1_l2_l4_l5-supply: true
+        vdd_l25-supply: true
+        vdd_l3_l24_l26-supply: true
+        vdd_l6_l7_l8_l9_l27-supply: true
+        vdd_lvs1-supply: true
+      patternProperties:
+        "^vdd_s[1-5]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8841-regulators
+    then:
+      patternProperties:
+        "^vdd_s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8916-regulators
+    then:
+      properties:
+        vdd_l1_l3-supply: true
+        vdd_l4_l5_l6-supply: true
+        vdd_l8_l11_l14_l15_l16-supply: true
+        vdd_l9_l10_l12_l13_l17_l18-supply: true
+      patternProperties:
+        "^vdd_l[27]-supply$": true
+        "^vdd_s[1-4]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8941-regulators
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Over-current protection interrupt for 5V S1
+            - description: Over-current protection interrupt for 5V S2
+        interrupt-names:
+          items:
+            - const: ocp-5vs1
+            - const: ocp-5vs2
+        vdd_l13_l20_l23_l24-supply: true
+        vdd_l1_l3-supply: true
+        vdd_l21-supply: true
+        vdd_l2_lvs_1_2_3-supply: true
+        vdd_l4_l11-supply: true
+        vdd_l5_l7-supply: true
+        vdd_l6_l12_l14_l15-supply: true
+        vdd_l8_l16_l18_19-supply: true
+        vdd_l9_l10_l17_l22-supply: true
+        vin_5vs-supply: true
+      patternProperties:
+        "^vdd_s[1-3]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8950-regulators
+    then:
+      properties:
+        vdd_l1_l19-supply: true
+        vdd_l20-supply: true
+        vdd_l21-supply: true
+        vdd_l2_l23-supply: true
+        vdd_l3-supply: true
+        vdd_l4_l5_l6_l7_l16-supply: true
+        vdd_l8_l11_l12_l17_l22-supply: true
+        vdd_l9_l10_l13_l14_l15_l18-supply: true
+      patternProperties:
+        "^vdd_s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8994-regulators
+    then:
+      properties:
+        vdd_l1-supply: true
+        vdd_l13_l19_l23_l24-supply: true
+        vdd_l14_l15-supply: true
+        vdd_l17_l29-supply: true
+        vdd_l20_l21-supply: true
+        vdd_l25-supply: true
+        vdd_l2_l26_l28-supply: true
+        vdd_l3_l11-supply: true
+        vdd_l4_l27_l31-supply: true
+        vdd_l5_l7-supply: true
+        vdd_l6_l12_l32-supply: true
+        vdd_l8_l16_l30-supply: true
+        vdd_l9_l10_l18_l22-supply: true
+        vdd_lvs_1_2-supply: true
+      patternProperties:
+        "^vdd_s[1-9][0-2]?-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmi8994-regulators
+    then:
+      properties:
+        vdd_l1-supply: true
+      patternProperties:
+        "^vdd_s[1-3]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmp8074-regulators
+    then:
+      properties:
+        vdd_l10_l11_l12_l13-supply: true
+        vdd_l1_l2-supply: true
+        vdd_l3_l8-supply: true
+        vdd_l5_l6_l15-supply: true
+      patternProperties:
+        "^vdd_l[479]-supply$": true
+        "^vdd_s[1-5]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pms405-regulators
+    then:
+      properties:
+        vdd_s3-supply: true
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    regulators {
+      compatible = "qcom,pm8941-regulators";
+      vdd_l1_l3-supply = <&s1>;
+
+      s1: s1 {
+        regulator-min-microvolt = <1300000>;
+        regulator-max-microvolt = <1400000>;
+      };
+
+      l1: l1 {
+        regulator-min-microvolt = <1225000>;
+        regulator-max-microvolt = <1300000>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
new file mode 100644
index 000000000000..dbe78cd4adba
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,usb-vbus-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The Qualcomm PMIC VBUS output regulator driver
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@quicinc.com>
+
+description: |
+  This regulator driver controls the VBUS output by the Qualcomm PMIC.  This
+  regulator will be enabled in situations where the device is required to
+  provide power to the connected peripheral.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8150b-vbus-reg
+
+  reg:
+    maxItems: 1
+    description: VBUS output base address
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+     pm8150b {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pm8150b_vbus: dcdc@1100 {
+            compatible = "qcom,pm8150b-vbus-reg";
+            reg = <0x1100>;
+        };
+     };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
new file mode 100644
index 000000000000..f97b8083678f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom-labibb-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost) Regulator
+
+maintainers:
+  - Sumit Semwal <sumit.semwal@linaro.org>
+
+description:
+  LAB can be used as a positive boost power supply and IBB can be used as a
+  negative boost power supply for display panels. Currently implemented for
+  pmi8998.
+
+properties:
+  compatible:
+    const: qcom,pmi8998-lab-ibb
+
+  lab:
+    type: object
+    additionalProperties: false
+
+    properties:
+      qcom,soft-start-us:
+        description: Regulator soft start time in microseconds.
+        enum: [200, 400, 600, 800]
+        default: 200
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+        description:
+          Short-circuit and over-current interrupts for lab.
+
+      interrupt-names:
+        minItems: 1
+        items:
+          - const: sc-err
+          - const: ocp
+
+    required:
+      - interrupts
+      - interrupt-names
+
+  ibb:
+    type: object
+    additionalProperties: false
+
+    properties:
+      qcom,discharge-resistor-kohms:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Discharge resistor value in KiloOhms.
+        enum: [300, 64, 32, 16]
+        default: 300
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+        description:
+          Short-circuit and over-current interrupts for ibb.
+
+      interrupt-names:
+        minItems: 1
+        items:
+          - const: sc-err
+          - const: ocp
+
+    required:
+      - interrupts
+      - interrupt-names
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    labibb {
+      compatible = "qcom,pmi8998-lab-ibb";
+
+      lab {
+        interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+                     <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "sc-err", "ocp";
+      };
+
+      ibb {
+        interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+                     <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "sc-err", "ocp";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
new file mode 100644
index 000000000000..0ae25d119b6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RaspberryPi 7" display ATTINY88-based regulator/backlight controller
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The RaspberryPi 7" display has an ATTINY88-based regulator/backlight
+  controller on the PCB, which is used to turn the display unit on/off
+  and control the backlight.
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    const: raspberrypi,7inch-touchscreen-panel-regulator
+
+  reg:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      regulator@45 {
+        compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+        reg = <0x45>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
index 91a39a33000b..6e8aa9eed3aa 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -23,6 +23,7 @@ properties:
 
   regulator-microvolt-offset:
     description: Offset applied to voltages to compensate for voltage drops
+    $ref: "/schemas/types.yaml#/definitions/uint32"
 
   regulator-min-microamp:
     description: smallest current consumers may set
@@ -117,27 +118,110 @@ properties:
     description: Enable over current protection.
     type: boolean
 
+  regulator-oc-protection-microamp:
+    description: Set over current protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted.
+
+  regulator-oc-error-microamp:
+    description: Set over current error limit. This is a limit where part of
+      the hardware propably is malfunctional and damage prevention is requested.
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted.
+
+  regulator-oc-warn-microamp:
+    description: Set over current warning limit. This is a limit where hardware
+      is assumed still to be functional but approaching limit where it gets
+      damaged. Recovery actions should be initiated. Zero can be passed to
+      disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted.
+
+  regulator-ov-protection-microvolt:
+    description: Set over voltage protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted. Limit is given as microvolt offset from
+      voltage set to regulator.
+
+  regulator-ov-error-microvolt:
+    description: Set over voltage error limit. This is a limit where part of
+      the hardware propably is malfunctional and damage prevention is requested
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted. Limit
+      is given as microvolt offset from voltage set to regulator.
+
+  regulator-ov-warn-microvolt:
+    description: Set over voltage warning limit. This is a limit where hardware
+      is assumed still to be functional but approaching limit where it gets
+      damaged. Recovery actions should be initiated. Zero can be passed to
+      disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted. Limit is given as microvolt
+      offset from voltage set to regulator.
+
+  regulator-uv-protection-microvolt:
+    description: Set over under voltage protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted. Limit is given as microvolt offset from
+      voltage set to regulator.
+
+  regulator-uv-error-microvolt:
+    description: Set under voltage error limit. This is a limit where part of
+      the hardware propably is malfunctional and damage prevention is requested
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted. Limit
+      is given as microvolt offset from voltage set to regulator.
+
+  regulator-uv-warn-microvolt:
+    description: Set over under voltage warning limit. This is a limit where
+      hardware is assumed still to be functional but approaching limit where
+      it gets damaged. Recovery actions should be initiated. Zero can be passed
+      to disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted. Limit is given as microvolt
+      offset from voltage set to regulator.
+
+  regulator-temp-protection-kelvin:
+    description: Set over temperature protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted.
+
+  regulator-temp-error-kelvin:
+    description: Set over temperature error limit. This is a limit where part of
+      the hardware propably is malfunctional and damage prevention is requested
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted.
+
+  regulator-temp-warn-kelvin:
+    description: Set over temperature warning limit. This is a limit where
+      hardware is assumed still to be functional but approaching limit where it
+      gets damaged. Recovery actions should be initiated. Zero can be passed to
+      disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted.
+
   regulator-active-discharge:
     description: |
       tristate, enable/disable active discharge of regulators. The values are:
       0: Disable active discharge.
       1: Enable active discharge.
       Absence of this property will leave configuration to default.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - enum: [ 0, 1 ]
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum: [0, 1]
 
   regulator-coupled-with:
     description: Regulators with which the regulator is coupled. The linkage
       is 2-way - all coupled regulators should be linked with each other.
       A regulator should not be coupled with its supplier.
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      maxItems: 1
 
   regulator-coupled-max-spread:
     description: Array of maximum spread between voltages of coupled regulators
       in microvolts, each value in the array relates to the corresponding
       couple specified by the regulator-coupled-with property.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
 
   regulator-max-step-microvolt:
     description: Maximum difference between current and target voltages
@@ -189,6 +273,8 @@ patternProperties:
 
     additionalProperties: false
 
+additionalProperties: true
+
 examples:
   - |
     xyzreg: regulator {
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml
new file mode 100644
index 000000000000..4a8a221bc902
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt4801-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4801 Display Bias regulators
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  Regulator nodes should be named to DSVP and DSVN. The
+  definition for each of these nodes is defined using the standard
+  binding for regulators at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT4801H/DS4801H-00.pdf
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt4801
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIOs to use to enable DSVP/DSVN regulator.
+      The first one is ENP to enable DSVP, and second one is ENM to enable DSVN.
+      Number of GPIO in the array list could be 1 or 2.
+      If only one gpio is specified, only one gpio used to control ENP/ENM.
+      Else if both are specified, DSVP/DSVN could be controlled individually.
+      If this property not specified, treat both as always-on regulators.
+
+      Property is deprecated. Use enable-gpios in each regulator.
+    minItems: 1
+    maxItems: 2
+    deprecated: true
+
+patternProperties:
+  "^DSV(P|N)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single display bias regulator.
+
+    properties:
+      enable-gpios:
+        description:
+          GPIO to use to enable DSVP/DSVN regulator. One GPIO can be configured
+          for controlling both regulators.  If this property not specified for
+          any regulator, treat both as always-on regulators.
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rt4801@73 {
+            compatible = "richtek,rt4801";
+            reg = <0x73>;
+
+            dsvp: DSVP {
+                regulator-name = "rt4801,dsvp";
+                regulator-min-microvolt = <4000000>;
+                regulator-max-microvolt = <6000000>;
+                regulator-boot-on;
+                enable-gpios = <&gpio26 2 0>;
+            };
+            dsvn: DSVN {
+                regulator-name = "rt4801,dsvn";
+                regulator-min-microvolt = <4000000>;
+                regulator-max-microvolt = <6000000>;
+                regulator-boot-on;
+                enable-gpios = <&gpio26 3 0>;
+            };
+
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml
new file mode 100644
index 000000000000..d9c23333e157
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt4831-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4831 Display Bias Voltage Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  RT4831 is a multifunctional device that can provide power to the LCD display
+  and LCD backlight.
+
+  For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V.
+  It is sufficient to meet the current LCD power requirement.
+
+  DSVLCM is a boost regulator in IC internal as DSVP and DSVN input power.
+  Its voltage should be configured above 0.15V to 0.2V gap larger than the
+  voltage needed for DSVP and DSVN. Too much voltage gap could improve the
+  voltage drop from the heavy loading scenario. But it also make the power
+  efficiency worse. It's a trade-off.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf
+
+patternProperties:
+  "^DSV(LCM|P|N)$":
+    type: object
+    $ref: regulator.yaml#
+    description:
+      Properties for single Display Bias Voltage regulator.
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml
new file mode 100644
index 000000000000..edb411be0390
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt5190a-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5190A PMIC Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5190A integrates 1 channel buck controller, 3 channels high efficiency
+  synchronous buck converters, 1 LDO, I2C control interface and peripherial
+  logical control.
+
+  It also supports mute AC OFF depop sound and quick setting storage while
+  input power is removed.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5190a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vin2-supply:
+    description: phandle to buck2 input voltage.
+
+  vin3-supply:
+    description: phandle to buck3 input voltage.
+
+  vin4-supply:
+    description: phandle to buck4 input voltage.
+
+  vinldo-supply:
+    description: phandle to ldo input voltage
+
+  richtek,mute-enable:
+    description: |
+      The mute function uses 'mutein', 'muteout', and 'vdet' pins as the control
+      signal. When enabled, The normal behavior is to bypass the 'mutein' signal
+      'muteout'. But if the power source removal is detected from 'vdet',
+      whatever the 'mutein' signal is, it will pull down the 'muteout' to force
+      speakers mute. this function is commonly used to prevent the speaker pop
+      noise during AC power turned off in the modern TV system design.
+    type: boolean
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[1-4]$|^ldo$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          regulator description for buck1 to buck4, and ldo.
+
+        properties:
+          regulator-allowed-modes:
+            description: |
+             buck operating mode, only buck1/4 support mode operating.
+              0: auto mode
+              1: force pwm mode
+            items:
+              enum: [0, 1]
+
+          richtek,latchup-enable:
+            type: boolean
+            description: |
+              If specified, undervolt protection mode changes from the default
+              hiccup to latchup.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@64 {
+        compatible = "richtek,rt5190a";
+        reg = <0x64>;
+        interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+        vin2-supply = <&rt5190_buck1>;
+        vin3-supply = <&rt5190_buck1>;
+        vin4-supply = <&rt5190_buck1>;
+
+        regulators {
+          rt5190_buck1: buck1 {
+            regulator-name = "rt5190a-buck1";
+            regulator-min-microvolt = <5090000>;
+            regulator-max-microvolt = <5090000>;
+            regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
+            regulator-boot-on;
+          };
+          buck2 {
+            regulator-name = "rt5190a-buck2";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <1400000>;
+            regulator-boot-on;
+          };
+          buck3 {
+            regulator-name = "rt5190a-buck3";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <1400000>;
+            regulator-boot-on;
+          };
+          buck4 {
+            regulator-name = "rt5190a-buck4";
+            regulator-min-microvolt = <850000>;
+            regulator-max-microvolt = <850000>;
+            regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
+            regulator-boot-on;
+          };
+          ldo {
+            regulator-name = "rt5190a-ldo";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-boot-on;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5759-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5759-regulator.yaml
new file mode 100644
index 000000000000..0a4c9576a432
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt5759-regulator.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt5759-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5759 High Performance DCDC Converter
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5759 is a high-performance, synchronous step-down DC-DC converter that
+  can deliver up to 9A output current from 3V to 6.5V input supply, The output
+  voltage can be programmable with I2C controlled 7-Bit VID.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT5759/DS5759-00.pdf
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5759
+      - richtek,rt5759a
+
+  reg:
+    maxItems: 1
+
+  regulator-allowed-modes:
+    description: |
+      buck allowed operating mode
+        0: auto mode (PSKIP: pulse skipping)
+        1: force pwm mode
+    items:
+      enum: [0, 1]
+
+  richtek,watchdog-enable:
+    description: enable the external watchdog reset pin listening
+    type: boolean
+
+allOf:
+  - $ref: regulator.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: richtek,rt5759
+    then:
+      properties:
+        richtek,watchdog-enable: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  # example 1 for RT5759
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@62 {
+        compatible = "richtek,rt5759";
+        reg = <0x62>;
+        regulator-name = "rt5759-buck";
+        regulator-min-microvolt = <600000>;
+        regulator-max-microvolt = <1500000>;
+        regulator-boot-on;
+      };
+    };
+  # example 2 for RT5759A
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@62 {
+        compatible = "richtek,rt5759a";
+        reg = <0x62>;
+        regulator-name = "rt5759a-buck";
+        regulator-min-microvolt = <600000>;
+        regulator-max-microvolt = <1725000>;
+        regulator-boot-on;
+        richtek,watchdog-enable;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml
new file mode 100644
index 000000000000..0534b0d68359
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT6160 BuckBoost converter
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT6160 is a high-efficiency buck-boost converter that can provide
+  up to 3A output current from 2025mV to 5200mV. And it support the wide
+  input voltage range from 2200mV to 5500mV.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt6160
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: A connection of the 'enable' gpio line.
+    maxItems: 1
+
+  richtek,vsel-active-low:
+    description: |
+      Used to indicate the 'vsel' pin active level. if not specified, use
+      high active level as the default.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt6160@75 {
+        compatible = "richtek,rt6160";
+        reg = <0x75>;
+        enable-gpios = <&gpio26 2 0>;
+        regulator-name = "rt6160-buckboost";
+        regulator-min-microvolt = <2025000>;
+        regulator-max-microvolt = <5200000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
new file mode 100644
index 000000000000..e983d0e70c9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt6245-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT6245 High Current Voltage Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT6245 is a high-performance, synchronous step-down converter
+  that can deliver up to 14A output current with an input supply
+  voltage range of 4.5V to 17V.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt6245
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: |
+      A connection of the chip 'enable' gpio line. If not provided,
+      it will be treat as a default-on power.
+    maxItems: 1
+
+  richtek,oc-level-select:
+    $ref: "/schemas/types.yaml#/definitions/uint8"
+    enum: [0, 1, 2, 3]
+    description: |
+      Over current level selection. Each respective value means the current
+      limit 8A, 14A, 12A, 10A. If this property is missing then keep in
+      in chip default.
+
+  richtek,ot-level-select:
+    $ref: "/schemas/types.yaml#/definitions/uint8"
+    enum: [0, 1, 2]
+    description: |
+      Over temperature level selection. Each respective value means the degree
+      150'c, 130'c, 170'c. If this property is missing then keep in chip
+      default.
+
+  richtek,pgdly-time-select:
+    $ref: "/schemas/types.yaml#/definitions/uint8"
+    enum: [0, 1, 2, 3]
+    description: |
+      Power good signal delay time selection. Each respective value means the
+      delay time 0us, 10us, 20us, 40us. If this property is missing then keep
+      in chip default.
+
+
+  richtek,switch-freq-select:
+    $ref: "/schemas/types.yaml#/definitions/uint8"
+    enum: [0, 1, 2]
+    description: |
+      Buck switch frequency selection. Each respective value means 400KHz,
+      800KHz, 1200KHz. If this property is missing then keep in chip default.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt6245@34 {
+        compatible = "richtek,rt6245";
+        reg = <0x34>;
+        enable-gpios = <&gpio26 2 0>;
+
+        regulator-name = "rt6245-regulator";
+        regulator-min-microvolt = <437500>;
+        regulator-max-microvolt = <1387500>;
+        regulator-boot-on;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
new file mode 100644
index 000000000000..a8ccb5cb8d77
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rtmv20-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RTMV20 laser diode regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  Richtek RTMV20 is a load switch current regulator that can supply up to 6A.
+  It is used to drive laser diode. There're two signals for chip controls
+  (Enable/Fail), Enable pin to turn chip on, and Fail pin as fault indication.
+  There're still four pins for camera control, two inputs (strobe and vsync),
+  the others for outputs (fsin1 and fsin2). Strobe input to start the current
+  supply, vsync input from IR camera, and fsin1/fsin2 output for the optional.
+
+properties:
+  compatible:
+    const: richtek,rtmv20
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  enable-gpios:
+    description: A connection of the 'enable' gpio line.
+    maxItems: 1
+
+  richtek,ld-pulse-delay-us:
+    description: |
+      load current pulse delay in microsecond after strobe pin pulse high.
+    minimum: 0
+    maximum: 100000
+    default: 0
+
+  richtek,ld-pulse-width-us:
+    description: |
+      Load current pulse width in microsecond after strobe pin pulse high.
+    minimum: 0
+    maximum: 10000
+    default: 1200
+
+  richtek,fsin1-delay-us:
+    description: |
+      Fsin1 pulse high delay in microsecond after vsync signal pulse high.
+    minimum: 0
+    maximum: 100000
+    default: 23000
+
+  richtek,fsin1-width-us:
+    description: |
+      Fsin1 pulse high width in microsecond after vsync signal pulse high.
+    minimum: 40
+    maximum: 10000
+    default: 160
+
+  richtek,fsin2-delay-us:
+    description: |
+      Fsin2 pulse high delay in microsecond after vsync signal pulse high.
+    minimum: 0
+    maximum: 100000
+    default: 23000
+
+  richtek,fsin2-width-us:
+    description: |
+      Fsin2 pulse high width in microsecond after vsync signal pulse high.
+    minimum: 40
+    maximum: 10000
+    default: 160
+
+  richtek,es-pulse-width-us:
+    description: Eye safety function pulse width limit in microsecond.
+    minimum: 0
+    maximum: 10000
+    default: 1200
+
+  richtek,es-ld-current-microamp:
+    description: Eye safety function load current limit in microamp.
+    minimum: 0
+    maximum: 6000000
+    default: 3000000
+
+  richtek,lbp-level-microvolt:
+    description: Low battery protection level in microvolt.
+    minimum: 2400000
+    maximum: 3700000
+    default: 2700000
+
+  richtek,lbp-enable:
+    description: Low battery protection function enable control.
+    type: boolean
+
+  richtek,strobe-polarity-high:
+    description: Strobe pin active polarity control.
+    type: boolean
+
+  richtek,vsync-polarity-high:
+    description: Vsync pin active polarity control.
+    type: boolean
+
+  richtek,fsin-enable:
+    description: Fsin function enable control.
+    type: boolean
+
+  richtek,fsin-output:
+    description: Fsin function output control.
+    type: boolean
+
+  richtek,es-enable:
+    description: Eye safety function enable control.
+    type: boolean
+
+  lsw:
+    description: load switch current regulator description.
+    type: object
+    $ref: "regulator.yaml#"
+
+required:
+  - compatible
+  - reg
+  - wakeup-source
+  - interrupts
+  - enable-gpios
+  - lsw
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtmv20@34 {
+        compatible = "richtek,rtmv20";
+        reg = <0x34>;
+        wakeup-source;
+        interrupts-extended = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>;
+        enable-gpios = <&gpio26 3 0>;
+
+        richtek,strobe-polarity-high;
+        richtek,vsync-polarity-high;
+
+        lsw {
+                regulator-name = "rtmv20,lsw";
+                regulator-min-microamp = <0>;
+                regulator-max-microamp = <6000000>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml
new file mode 100644
index 000000000000..3f47e8e6c4fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rtq2134-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RTQ2134 SubPMIC Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ2134 is a multi-phase, programmable power management IC that
+  integrates with four high efficient, synchronous step-down converter cores.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RTQ2134-QA/DSQ2134-QA-01.pdf
+
+properties:
+  compatible:
+    enum:
+      - richtek,rtq2134
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[1-3]$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          regulator description for buck[1-3].
+
+        properties:
+          richtek,use-vsel-dvs:
+            type: boolean
+            description: |
+              If specified, buck will listen to 'vsel' pin for dvs config.
+              Else, use dvs0 voltage by default.
+
+          richtek,uv-shutdown:
+            type: boolean
+            description: |
+              If specified, use shutdown as UV action. Else, hiccup by default.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtq2134@18 {
+        compatible = "richtek,rtq2134";
+        reg = <0x18>;
+
+        regulators {
+          buck1 {
+            regulator-name = "rtq2134-buck1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1850000>;
+            regulator-always-on;
+            richtek,use-vsel-dvs;
+            regulator-state-mem {
+              regulator-suspend-min-microvolt = <550000>;
+              regulator-suspend-max-microvolt = <550000>;
+            };
+          };
+          buck2 {
+            regulator-name = "rtq2134-buck2";
+            regulator-min-microvolt = <1120000>;
+            regulator-max-microvolt = <1120000>;
+            regulator-always-on;
+            richtek,use-vsel-dvs;
+            regulator-state-mem {
+              regulator-suspend-min-microvolt = <1120000>;
+              regulator-suspend-max-microvolt = <1120000>;
+            };
+          };
+          buck3 {
+            regulator-name = "rtq2134-buck3";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <600000>;
+            regulator-always-on;
+            richtek,use-vsel-dvs;
+            regulator-state-mem {
+              regulator-suspend-min-microvolt = <600000>;
+              regulator-suspend-max-microvolt = <600000>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml
new file mode 100644
index 000000000000..e6e5a9a7d940
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rtq6752-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RTQ6752 TFT LCD Voltage Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ6752 is an I2C interface pgorammable power management IC. It includes
+  two synchronous boost converter for PAVDD, and one synchronous NAVDD
+  buck-boost. The device is suitable for automotive TFT-LCD panel.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rtq6752
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: |
+      A connection of the chip 'enable' gpio line. If not provided, treat it as
+      external pull up.
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^(p|n)avdd$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          regulator description for pavdd and navdd.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtq6752@6b {
+        compatible = "richtek,rtq6752";
+        reg = <0x6b>;
+        enable-gpios = <&gpio26 2 0>;
+
+        regulators {
+          pavdd {
+            regulator-name = "rtq6752-pavdd";
+            regulator-min-microvolt = <5000000>;
+            regulator-max-microvolt = <7300000>;
+            regulator-boot-on;
+          };
+          navdd {
+            regulator-name = "rtq6752-navdd";
+            regulator-min-microvolt = <5000000>;
+            regulator-max-microvolt = <7300000>;
+            regulator-boot-on;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt b/Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt
deleted file mode 100644
index 698cfc3bc3dd..000000000000
--- a/Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-ROHM BD70528 Power Management Integrated Circuit regulator bindings
-
-Required properties:
- - regulator-name: should be "buck1", "buck2", "buck3", "ldo1", "ldo2", "ldo3",
-		   "led_ldo1", "led_ldo2"
-
-List of regulators provided by this controller. BD70528 regulators node
-should be sub node of the BD70528 MFD node. See BD70528 MFD bindings at
-Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
-
-The valid names for BD70528 regulator nodes are:
-BUCK1, BUCK2, BUCK3, LDO1, LDO2, LDO3, LED_LDO1, LED_LDO2
-
-Optional properties:
-- Any optional property defined in bindings/regulator/regulator.txt
-
-Example:
-regulators {
-	buck1: BUCK1 {
-		regulator-name = "buck1";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <3400000>;
-		regulator-boot-on;
-		regulator-ramp-delay = <125>;
-	};
-	buck2: BUCK2 {
-		regulator-name = "buck2";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-ramp-delay = <125>;
-	};
-	buck3: BUCK3 {
-		regulator-name = "buck3";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-ramp-delay = <250>;
-	};
-	ldo1: LDO1 {
-		regulator-name = "ldo1";
-		regulator-min-microvolt = <1650000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-	ldo2: LDO2 {
-		regulator-name = "ldo2";
-		regulator-min-microvolt = <1650000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
-	ldo3: LDO3 {
-		regulator-name = "ldo3";
-		regulator-min-microvolt = <1650000>;
-		regulator-max-microvolt = <3300000>;
-	};
-	led_ldo1: LED_LDO1 {
-		regulator-name = "led_ldo1";
-		regulator-min-microvolt = <200000>;
-		regulator-max-microvolt = <300000>;
-	};
-	led_ldo2: LED_LDO2 {
-		regulator-name = "led_ldo2";
-		regulator-min-microvolt = <200000>;
-		regulator-max-microvolt = <300000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
new file mode 100644
index 000000000000..d61e8675f067
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71815 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  This module is part of the ROHM BD718215 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  The valid names for BD71815 regulator nodes are
+  buck1, buck2, buck3, buck4, buck5,
+  ldo1, ldo2, ldo3, ldo4, ldo5,
+  ldodvref, ldolpsr, wled
+
+properties:
+  wled:
+    type: object
+    description:
+      properties for wled regulator
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      regulator-name:
+        const: wled
+
+patternProperties:
+  "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$":
+    type: object
+    description:
+      Properties for single LDO/BUCK regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$"
+        description:
+          should be "ldo1", ..., "ldo5", "buck1", ..., "buck5" and "ldolpsr"
+          for ldolpsr regulator, "ldodvref" for ldodvref reglator.
+
+      rohm,vsel-gpios:
+        description:
+          GPIO used to control ldo4 state (when ldo4 is controlled by GPIO).
+
+      rohm,dvs-run-voltage:
+        description:
+          PMIC "RUN" state voltage in uV when PMIC HW states are used. See
+          comments below for bucks/LDOs which support this. 0 means
+          regulator should be disabled at RUN state.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
+
+      rohm,dvs-snvs-voltage:
+        description:
+          Whether to keep regulator enabled at "SNVS" state or not.
+          0 means regulator should be disabled at SNVS state, non zero voltage
+          keeps regulator enabled. BD71815 does not change voltage level
+          when PMIC transitions to SNVS.SNVS voltage depends on the previous
+          state (from which the PMIC transitioned to SNVS).
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
+
+      rohm,dvs-suspend-voltage:
+        description:
+          PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See
+          comments below for bucks/LDOs which support this. 0 means
+          regulator should be disabled at SUSPEND state.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
+
+      rohm,dvs-lpsr-voltage:
+        description:
+          PMIC "LPSR" state voltage in uV when PMIC HW states are used. See
+          comments below for bucks/LDOs which support this. 0 means
+          regulator should be disabled at LPSR state.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
+
+        # Bucks 1 and 2 support giving separate voltages for operational states
+        # (RUN /CLEAN according to data-sheet) and non operational states
+        # (LPSR/SUSPEND). The voltage is automatically changed when HW
+        # state changes. Omitting these properties from bucks 1 and 2 leave
+        # buck voltages to not be toggled by HW state. Enable status may still
+        # be toggled by state changes depending on HW default settings.
+        #
+        # Bucks 3-5 and ldos 1-5 support setting the RUN state voltage here.
+        # Given RUN voltage is used at all states if regulator is enabled at
+        # given state.
+        # Values given for other states are regarded as enable/disable at
+        # given state (see below).
+        #
+        # All regulators except WLED support specifying enable/disable status
+        # for each of the HW states (RUN/SNVS/SUSPEND/LPSR). HW defaults can
+        # be overridden by setting voltage to 0 (regulator disabled at given
+        # state) or non-zero (regulator enabled at given state). Please note
+        # that setting non zero voltages for bucks 1/2 will also enable voltage
+        # changes according to state change.
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
index 71ce032b8cf8..5ce587fff961 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
@@ -24,10 +24,9 @@ description: |
 patternProperties:
   "^LDO[1-7]$":
     type: object
-    allOf:
-      - $ref: regulator.yaml#
     description:
       Properties for single LDO regulator.
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -35,12 +34,13 @@ patternProperties:
         description:
           should be "ldo1", ..., "ldo7"
 
+    unevaluatedProperties: false
+
   "^BUCK[1-7]$":
     type: object
-    allOf:
-      - $ref: regulator.yaml#
     description:
       Properties for single BUCK regulator.
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -49,40 +49,36 @@ patternProperties:
           should be "buck1", ..., "buck7"
 
       rohm,dvs-run-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 3300000
         description:
           PMIC default "RUN" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
 
       rohm,dvs-idle-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 3300000
         description:
           PMIC default "IDLE" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
 
       rohm,dvs-suspend-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 3300000
         description:
           PMIC default "SUSPEND" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
 
       rohm,dvs-lpsr-voltage:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 3300000
         description:
           PMIC default "LPSR" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
 
         # Supported default DVS states:
         #     buck       |    run     |   idle    | suspend  | lpsr
@@ -103,5 +99,7 @@ patternProperties:
 
     required:
       - regulator-name
-  additionalProperties: false
+
+    unevaluatedProperties: false
+
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
deleted file mode 100644
index cbce62c22b60..000000000000
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
+++ /dev/null
@@ -1,162 +0,0 @@
-ROHM BD71837 and BD71847 Power Management Integrated Circuit regulator bindings
-
-Required properties:
- - regulator-name: should be "buck1", ..., "buck8" and "ldo1", ..., "ldo7" for
-                   BD71837. For BD71847 names should be "buck1", ..., "buck6"
-		   and "ldo1", ..., "ldo6"
-
-List of regulators provided by this controller. BD71837 regulators node
-should be sub node of the BD71837 MFD node. See BD71837 MFD bindings at
-Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
-Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
-definition for each of these nodes is defined using the standard
-binding for regulators at
-Documentation/devicetree/bindings/regulator/regulator.txt.
-Note that if BD71837 starts at RUN state you probably want to use
-regulator-boot-on at least for BUCK6 and BUCK7 so that those are not
-disabled by driver at startup. LDO5 and LDO6 are supplied by those and
-if they are disabled at startup the voltage monitoring for LDO5/LDO6 will
-cause PMIC to reset.
-
-The valid names for BD71837 regulator nodes are:
-BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8
-LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
-
-The valid names for BD71847 regulator nodes are:
-BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6
-LDO1, LDO2, LDO3, LDO4, LDO5, LDO6
-
-Optional properties:
-- rohm,dvs-run-voltage		: PMIC default "RUN" state voltage in uV.
-				  See below table for bucks which support this.
-- rohm,dvs-idle-voltage		: PMIC default "IDLE" state voltage in uV.
-				  See below table for bucks which support this.
-- rohm,dvs-suspend-voltage	: PMIC default "SUSPEND" state voltage in uV.
-				  See below table for bucks which support this.
-- Any optional property defined in bindings/regulator/regulator.txt
-
-Supported default DVS states:
-
-BD71837:
-buck	| dvs-run-voltage	| dvs-idle-voltage	| dvs-suspend-voltage
------------------------------------------------------------------------------
-1	| supported		| supported		| supported
-----------------------------------------------------------------------------
-2	| supported		| supported		| not supported
-----------------------------------------------------------------------------
-3	| supported		| not supported		| not supported
-----------------------------------------------------------------------------
-4	| supported		| not supported		| not supported
-----------------------------------------------------------------------------
-rest	| not supported		| not supported		| not supported
-
-BD71847:
-buck	| dvs-run-voltage	| dvs-idle-voltage	| dvs-suspend-voltage
------------------------------------------------------------------------------
-1	| supported		| supported		| supported
-----------------------------------------------------------------------------
-2	| supported		| supported		| not supported
-----------------------------------------------------------------------------
-rest	| not supported		| not supported		| not supported
-
-Example:
-regulators {
-	buck1: BUCK1 {
-		regulator-name = "buck1";
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-ramp-delay = <1250>;
-		rohm,dvs-run-voltage = <900000>;
-		rohm,dvs-idle-voltage = <850000>;
-		rohm,dvs-suspend-voltage = <800000>;
-	};
-	buck2: BUCK2 {
-		regulator-name = "buck2";
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-ramp-delay = <1250>;
-		rohm,dvs-run-voltage = <1000000>;
-		rohm,dvs-idle-voltage = <900000>;
-	};
-	buck3: BUCK3 {
-		regulator-name = "buck3";
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-boot-on;
-		rohm,dvs-run-voltage = <1000000>;
-	};
-	buck4: BUCK4 {
-		regulator-name = "buck4";
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-boot-on;
-		rohm,dvs-run-voltage = <1000000>;
-	};
-	buck5: BUCK5 {
-		regulator-name = "buck5";
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <1350000>;
-		regulator-boot-on;
-	};
-	buck6: BUCK6 {
-		regulator-name = "buck6";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-	buck7: BUCK7 {
-		regulator-name = "buck7";
-		regulator-min-microvolt = <1605000>;
-		regulator-max-microvolt = <1995000>;
-		regulator-boot-on;
-	};
-	buck8: BUCK8 {
-		regulator-name = "buck8";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-	};
-
-	ldo1: LDO1 {
-		regulator-name = "ldo1";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-	ldo2: LDO2 {
-		regulator-name = "ldo2";
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-		regulator-boot-on;
-	};
-	ldo3: LDO3 {
-		regulator-name = "ldo3";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-	};
-	ldo4: LDO4 {
-		regulator-name = "ldo4";
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <1800000>;
-	};
-	ldo5: LDO5 {
-		regulator-name = "ldo5";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-	};
-	ldo6: LDO6 {
-		regulator-name = "ldo6";
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <1800000>;
-	};
-	ldo7_reg: LDO7 {
-		regulator-name = "ldo7";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
new file mode 100644
index 000000000000..1941b36cf1ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71837-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71837 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  List of regulators provided by this controller. BD71837 regulators node
+  should be sub node of the BD71837 MFD node. See BD71837 MFD bindings at
+  Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
+  Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
+  definition for each of these nodes is defined using the standard
+  binding for regulators at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  Note that if BD71837 starts at RUN state you probably want to use
+  regulator-boot-on at least for BUCK6 and BUCK7 so that those are not
+  disabled by driver at startup. LDO5 and LDO6 are supplied by those and
+  if they are disabled at startup the voltage monitoring for LDO5/LDO6 will
+  cause PMIC to reset.
+
+#The valid names for BD71837 regulator nodes are:
+#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8
+#LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
+
+patternProperties:
+  "^LDO[1-7]$":
+    type: object
+    $ref: regulator.yaml#
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^ldo[1-7]$"
+        description:
+          should be "ldo1", ..., "ldo7"
+
+    unevaluatedProperties: false
+
+  "^BUCK[1-8]$":
+    type: object
+    $ref: regulator.yaml#
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^buck[1-8]$"
+        description:
+          should be "buck1", ..., "buck8"
+
+      rohm,dvs-run-voltage:
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 1300000
+        description:
+          PMIC default "RUN" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-idle-voltage:
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 1300000
+        description:
+          PMIC default "IDLE" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-suspend-voltage:
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 1300000
+        description:
+          PMIC default "SUSPEND" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+        # Supported default DVS states:
+        #
+        # BD71837:
+        # buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
+        # ----------------------------------------------------------------
+        # 1    | supported       | supported        | supported
+        # ----------------------------------------------------------------
+        # 2    | supported       | supported        | not supported
+        # ----------------------------------------------------------------
+        # 3    | supported       | not supported    | not supported
+        # ----------------------------------------------------------------
+        # 4    | supported       | not supported    | not supported
+        # ----------------------------------------------------------------
+        # rest | not supported   | not supported    | not supported
+
+      # BD71837 power outputs can either be controlled by the PMIC internal
+      # hardware state machine or by software. If you need regulators to be
+      # turned ON/OFF for example based on PMIC_STBY_REQ line (which toggles
+      # PMIC HW state machine) - then you should set this property.
+      # Tradeoff is that then SW can't control the ON/OFF state for this
+      # regulator (other than invoking a PMIC state change).
+      rohm,no-regulator-enable-control:
+        description: |
+          Enable/Disable control of this regulator must be left to the
+          PMIC hardware state machine.
+        type: boolean
+
+      # Setups where regulator (especially the buck8) output voltage is scaled
+      # by adding external connection where some other regulator output is
+      # connected to feedback-pin (over suitable resistors) is getting popular
+      # amongst users of BD71837. (This allows for example scaling down the
+      # buck8 voltages to suit lover GPU voltages for projects where buck8 is
+      # (ab)used to supply power for GPU.
+      #
+      # So we allow describing this external connection from DT and scale the
+      # voltages accordingly. This is what the connection should look like:
+      #
+      # |---------------|
+      # |       buck 8  |-------+----->Vout
+      # |               |       |
+      # |---------------|       |
+      #        |                |
+      #        |                |
+      #        +-------+--R2----+
+      #                |
+      #                R1
+      #                |
+      #        V FB-pull-up
+      #
+      # Here the buck output is sifted according to formula:
+      #
+      # Vout_o = Vo - (Vpu - Vo)*R2/R1
+      # Linear_step = step_orig*(R1+R2)/R1
+      #
+      # where:
+      # Vout_o is adjusted voltage output at vsel reg value 0
+      # Vo is original voltage output at vsel reg value 0
+      # Vpu is the pull-up voltage V FB-pull-up in the picture
+      # R1 and R2 are resistor values.
+
+      rohm,fb-pull-up-microvolt:
+        description:
+          Feedback-pin has pull-up connection to adjust voltage range. This is
+          the used pull-up voltage before R1.
+
+      rohm,feedback-pull-up-r1-ohms:
+        description:
+          Feedback-pin has pull-up connection to adjust voltage range. This is
+          the used R1 resistor.
+
+      rohm,feedback-pull-up-r2-ohms:
+        description:
+          Feedback-pin has pull-up connection to adjust voltage range. This is
+          the used R2 resistor.
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
new file mode 100644
index 000000000000..a1b806373853
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71847-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71847 and BD71850 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  List of regulators provided by this controller. BD71847 regulators node
+  should be sub node of the BD71847 MFD node. See BD71847 MFD bindings at
+  Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
+  Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
+  definition for each of these nodes is defined using the standard
+  binding for regulators at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  Note that if BD71847 starts at RUN state you probably want to use
+  regulator-boot-on at least for BUCK5. LDO6 is supplied by it and it must
+  not be disabled by driver at startup. If BUCK5 is disabled at startup the
+  voltage monitoring for LDO5/LDO6 can cause PMIC to reset.
+
+#The valid names for BD71847 regulator nodes are:
+#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6
+#LDO1, LDO2, LDO3, LDO4, LDO5, LDO6
+
+patternProperties:
+  "^LDO[1-6]$":
+    type: object
+    $ref: regulator.yaml#
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^ldo[1-6]$"
+        description:
+          should be "ldo1", ..., "ldo6"
+
+    unevaluatedProperties: false
+
+  "^BUCK[1-6]$":
+    type: object
+    $ref: regulator.yaml#
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^buck[1-6]$"
+        description:
+          should be "buck1", ..., "buck6"
+
+      rohm,dvs-run-voltage:
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 1300000
+        description:
+          PMIC default "RUN" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-idle-voltage:
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 1300000
+        description:
+          PMIC default "IDLE" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-suspend-voltage:
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 1300000
+        description:
+          PMIC default "SUSPEND" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+        # Supported default DVS states:
+        #
+        # BD71847:
+        # buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
+        # ----------------------------------------------------------------
+        # 1    | supported       | supported        | supported
+        # ----------------------------------------------------------------
+        # 2    | supported       | supported        | not supported
+        # ----------------------------------------------------------------
+        # rest | not supported   | not supported    | not supported
+
+      # BD718(47/50) power outputs can either be controlled by the PMIC internal
+      # hardware state machine or by software. If you need regulators to be
+      # turned ON/OFF for example based on PMIC_STBY_REQ line (which toggles
+      # PMIC HW state machine) - then you should set this property.
+      # Tradeoff is that then SW can't control the ON/OFF state for this
+      # regulator (other than invoking a PMIC state change).
+      rohm,no-regulator-enable-control:
+        description: |
+          Enable/Disable control of this regulator must be left to the
+          PMIC hardware state machine.
+        type: boolean
+
+      # Setups where regulator (especially the buck8) output voltage is scaled
+      # by adding external connection where some other regulator output is
+      # connected to feedback-pin (over suitable resistors) is getting popular
+      # amongst users of BD71837. (This allows for example scaling down the
+      # buck8 voltages to suit lover GPU voltages for projects where buck8 is
+      # (ab)used to supply power for GPU.
+      #
+      # So we allow describing this external connection from DT and scale the
+      # voltages accordingly. This is what the connection should look like:
+      #
+      # |---------------|
+      # |       buck 8  |-------+----->Vout
+      # |               |       |
+      # |---------------|       |
+      #        |                |
+      #        |                |
+      #        +-------+--R2----+
+      #                |
+      #                R1
+      #                |
+      #        V FB-pull-up
+      #
+      # Here the buck output is sifted according to formula:
+      #
+      # Vout_o = Vo - (Vpu - Vo)*R2/R1
+      # Linear_step = step_orig*(R1+R2)/R1
+      #
+      # where:
+      # Vout_o is adjusted voltage output at vsel reg value 0
+      # Vo is original voltage output at vsel reg value 0
+      # Vpu is the pull-up voltage V FB-pull-up in the picture
+      # R1 and R2 are resistor values.
+
+      rohm,fb-pull-up-microvolt:
+        description:
+          Feedback-pin has pull-up connection to adjust voltage range. This is
+          the used pull-up voltage before R1.
+
+      rohm,feedback-pull-up-r1-ohms:
+        description:
+          Feedback-pin has pull-up connection to adjust voltage range. This is
+          the used R1 resistor.
+
+      rohm,feedback-pull-up-r2-ohms:
+        description:
+          Feedback-pin has pull-up connection to adjust voltage range. This is
+          the used R2 resistor.
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
new file mode 100644
index 000000000000..7cb74cc8c5d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd9576-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD9576 and BD9573 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  This module is part of the ROHM BD9576 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  The valid names for BD9576 regulator nodes are
+  regulator-vd50, regulator-vd18, regulator-vdddr, regulator-vd10,
+  regulator-voutl1, regulator-vouts1
+
+patternProperties:
+  "regulator-.+":
+    type: object
+    description:
+      Properties for single regulator.
+    $ref: "regulator.yaml#"
+
+    properties:
+      rohm,ocw-fet-ron-micro-ohms:
+        description: |
+          External FET's ON-resistance. Required if VoutS1 OCP/OCW is
+          to be set.
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
deleted file mode 100644
index bae3c7f838cf..000000000000
--- a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-Binding for Samsung S2MPA01 regulator block
-===========================================
-
-This is a part of device tree bindings for S2M family multi-function devices.
-More information can be found in bindings/mfd/sec-core.txt file.
-
-The S2MPA01 device provide buck and LDO regulators.
-
-To register these with regulator framework instantiate under main device node
-a sub-node named "regulators" with more sub-nodes for each regulator using the
-common regulator binding documented in:
- - Documentation/devicetree/bindings/regulator/regulator.txt
-
-
-Names of regulators supported by S2MPA01 device:
-	- LDOn
-		  - valid values for n are 1 to 26
-		  - Example: LDO1, LD02, LDO26
-	- BUCKn
-		  - valid values for n are 1 to 10.
-		  - Example: BUCK1, BUCK2, BUCK9
-Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of device.
-
-
-Optional properties of buck regulator nodes under "regulators" sub-node:
- - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
-   (default), 25000, or 50000. May be 0 for disabling the ramp delay on
-   BUCK{1,2,3,4}.
-
-   In the absence of the regulator-ramp-delay property, the default ramp
-   delay will be used.
-
-   Note: Some bucks share the ramp rate setting i.e. same ramp value
-   will be set for a particular group of bucks so provide the same
-   regulator-ramp-delay value for them.
-   Groups sharing ramp rate:
-    - buck{1,6},
-    - buck{2,4},
-    - buck{8,9,10}.
-
-Example:
-
-	s2mpa01_pmic@66 {
-		compatible = "samsung,s2mpa01-pmic";
-		reg = <0x66>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ALIVE";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDDQ_MMC2";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <50000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
new file mode 100644
index 000000000000..0f9eb317ba9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mpa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPA01 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPA01 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml for
+  additional information and example.
+
+patternProperties:
+  # 26 LDOs
+  "^LDO([1-9]|1[0-9]|2[0-6])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+
+  # 10 bucks
+  "^BUCK([1-9]|10)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      regulator-ramp-delay:
+        enum: [0, 6250, 12500, 25000, 50000]
+        default: 12500
+        description: |
+          May be 0 for disabling the ramp delay on BUCK{1,2,3,4}.
+
+          In the absence of the regulator-ramp-delay property, the default ramp
+          delay will be used.
+
+          Note: Some bucks share the ramp rate setting i.e. same ramp value
+          will be set for a particular group of bucks so provide the same
+          regulator-ramp-delay value for them.
+          Groups sharing ramp rate:
+            * buck{1,6},
+            * buck{2,4},
+            * buck{8,9,10}.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt
deleted file mode 100644
index 27a48bf1b185..000000000000
--- a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-Binding for Samsung S2M family regulator block
-==============================================
-
-This is a part of device tree bindings for S2M family multi-function devices.
-More information can be found in bindings/mfd/sec-core.txt file.
-
-The S2MPS11/13/14/15 and S2MPU02 devices provide buck and LDO regulators.
-
-To register these with regulator framework instantiate under main device node
-a sub-node named "regulators" with more sub-nodes for each regulator using the
-common regulator binding documented in:
- - Documentation/devicetree/bindings/regulator/regulator.txt
-
-
-Names of regulators supported by different devices:
-	- LDOn
-		  - valid values for n are:
-			- S2MPS11: 1 to 38
-			- S2MPS13: 1 to 40
-			- S2MPS14: 1 to 25
-			- S2MPS15: 1 to 27
-			- S2MPU02: 1 to 28
-		  - Example: LDO1, LDO2, LDO28
-	- BUCKn
-		  - valid values for n are:
-			- S2MPS11: 1 to 10
-			- S2MPS13: 1 to 10
-			- S2MPS14: 1 to 5
-			- S2MPS15: 1 to 10
-			- S2MPU02: 1 to 7
-		  - Example: BUCK1, BUCK2, BUCK9
-Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of device.
-
-
-Optional properties of the nodes under "regulators" sub-node:
- - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500,
-   25000 (default) or 50000.
-
-   Additionally S2MPS11 supports disabling ramp delay for BUCK{2,3,4,6}
-   by setting it to <0>.
-
-   Note: On S2MPS11 some bucks share the ramp rate setting i.e. same ramp value
-   will be set for a particular group of bucks so provide the same
-   regulator-ramp-delay value for them.
-   Groups sharing ramp rate:
-    - buck{1,6},
-    - buck{3,4},
-    - buck{7,8,10}.
-
- - samsung,ext-control-gpios: On S2MPS14 the LDO10, LDO11 and LDO12 can be
-   configured to external control over GPIO. To turn this feature on this
-   property must be added to the regulator sub-node:
-    - samsung,ext-control-gpios: GPIO specifier for one GPIO
-                                 controlling this regulator (enable/disable)
-  Example:
-	LDO12 {
-		regulator-name = "V_EMMC_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		samsung,ext-control-gpios = <&gpk0 2 0>;
-	};
-
-
-Example:
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ABB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_ALIVE_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <50000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml
new file mode 100644
index 000000000000..f1c50dcd0b04
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS11 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPS11 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+patternProperties:
+  # 38 LDOs
+  "^LDO([1-9]|[1-2][0-9]|3[0-8])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+
+  # 10 bucks
+  "^BUCK([1-9]|10)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml
new file mode 100644
index 000000000000..53b105a4ead1
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mps13.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS13 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPS13 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+patternProperties:
+  # 40 LDOs
+  "^LDO([1-9]|[1-3][0-9]|40)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+
+  # 10 bucks
+  "^BUCK([1-9]|10)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
new file mode 100644
index 000000000000..01f9d4e236e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mps14.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS14 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPS14 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+patternProperties:
+  # 25 LDOs
+  "^LDO([1-9]|[1][0-9]|2[0-5])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+
+  # 5 bucks
+  "^BUCK[1-5]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml
new file mode 100644
index 000000000000..9576c2df45a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mps15.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS15 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPS15 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+patternProperties:
+  # 27 LDOs
+  "^LDO([1-9]|[1][0-9]|2[0-7])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+
+  # 10 bucks
+  "^BUCK([1-9]|10)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml
new file mode 100644
index 000000000000..39b652c3c3c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mpu02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPU02 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPU02 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+patternProperties:
+  # 28 LDOs
+  "^LDO([1-9]|1[0-9]|2[0-8])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+
+  # 7 bucks
+  "^BUCK[1-7]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
deleted file mode 100644
index 093edda0c8df..000000000000
--- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ /dev/null
@@ -1,145 +0,0 @@
-Binding for Samsung S5M8767 regulator block
-===========================================
-
-This is a part of device tree bindings for S5M family multi-function devices.
-More information can be found in bindings/mfd/sec-core.txt file.
-
-The S5M8767 device provide buck and LDO regulators.
-
-To register these with regulator framework instantiate under main device node
-a sub-node named "regulators" with more sub-nodes for each regulator using the
-common regulator binding documented in:
- - Documentation/devicetree/bindings/regulator/regulator.txt
-
-
-Required properties of the main device node (the parent!):
- - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-   units for buck2 when changing voltage using gpio dvs. Refer to [1] below
-   for additional information.
-
- - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-   units for buck3 when changing voltage using gpio dvs. Refer to [1] below
-   for additional information.
-
- - s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-   units for buck4 when changing voltage using gpio dvs. Refer to [1] below
-   for additional information.
-
- - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
-   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
- [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
-     property should specify atleast one voltage level (which would be a
-     safe operating voltage).
-
-     If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, then all the eight voltage values for the
-     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties of the main device node (the parent!):
- - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
- - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
- - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
-
-Additional properties required if either of the optional properties are used:
-
- - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
-   the possible 8 options selectable by the dvs gpios. The value of this
-   property should be between 0 and 7. If not specified or if out of range, the
-   default value of this property is set to 0.
-
- - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
-   for dvs. The format of the gpio specifier depends in the gpio controller.
-
-
-Names of regulators supported by S5M8767 device:
-	- LDOn
-		  - valid values for n are 1 to 28
-		  - Example: LDO1, LDO2, LDO28
-	- BUCKn
-		  - valid values for n are 1 to 9.
-		  - Example: BUCK1, BUCK2, BUCK9
-Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of device.
-
-
-Optional properties of the nodes under "regulators" sub-node:
- - op_mode: describes the different operating modes of the LDO's with
-            power mode change in SOC. The different possible values are,
-             0 - always off mode
-             1 - on in normal mode
-             2 - low power mode
-             3 - suspend mode
- - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
-                                   GPIO controlling this regulator
-                                   (enable/disable); This is valid only
-                                   for buck9.
-
-Example:
-
-	s5m8767_pmic@66 {
-		compatible = "samsung,s5m8767-pmic";
-		reg = <0x66>;
-
-		s5m8767,pmic-buck2-uses-gpio-dvs;
-		s5m8767,pmic-buck3-uses-gpio-dvs;
-		s5m8767,pmic-buck4-uses-gpio-dvs;
-
-		s5m8767,pmic-buck-default-dvs-idx = <0>;
-
-		s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
-						 <&gpx0 1 0>, /* DVS2 */
-						 <&gpx0 2 0>; /* DVS3 */
-
-		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
-						<&gpx2 4 0>, /* SET2 */
-						<&gpx2 5 0>; /* SET3 */
-
-		s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
-						 <1250000>, <1200000>,
-						 <1150000>, <1100000>,
-						 <1000000>, <950000>;
-
-		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
-						 <1100000>, <1100000>,
-						 <1000000>, <1000000>,
-						 <1000000>, <1000000>;
-
-		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ABB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_ALIVE_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_MIF_1.2V";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vemmc_reg: BUCK9 {
-				regulator-name = "VMEM_VDD_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <3>; /* Standby Mode */
-				s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
new file mode 100644
index 000000000000..172631ca3c25
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s5m8767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5M8767 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S5M8767 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml for
+  additional information and example.
+
+patternProperties:
+  # 28 LDOs
+  "^LDO([1-9]|1[0-9]|2[0-8])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      op_mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
+        description: |
+          Describes the different operating modes of the LDO's with power mode
+          change in SOC. The different possible values are:
+            0 - always off mode
+            1 - on in normal mode
+            2 - low power mode
+            3 - suspend mode
+
+    required:
+      - regulator-name
+
+  # 8 bucks
+  "^BUCK[1-8]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      op_mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
+        description: |
+          Describes the different operating modes of the regulator with power
+          mode change in SOC. The different possible values are:
+            0 - always off mode
+            1 - on in normal mode
+            2 - low power mode
+            3 - suspend mode
+
+    required:
+      - regulator-name
+
+properties:
+  # 9 buck
+  BUCK9:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      op_mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
+        description: |
+          Describes the different operating modes of the regulator with power
+          mode change in SOC. The different possible values are:
+            0 - always off mode
+            1 - on in normal mode
+            2 - low power mode
+            3 - suspend mode
+
+      s5m8767,pmic-ext-control-gpios:
+        maxItems: 1
+        description: |
+          GPIO specifier for one GPIO controlling this regulator on/off.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml
new file mode 100644
index 000000000000..c3a902e11b5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/silergy,sy8106a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silergy SY8106A Voltage Regulator
+
+maintainers:
+  - Ondrej Jirman <megous@megous.com>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: silergy,sy8106a
+
+  reg:
+    maxItems: 1
+
+  silergy,fixed-microvolt:
+    description: >
+      The voltage when I2C regulating is disabled (set by external resistor
+      like a fixed voltage)
+
+required:
+  - compatible
+  - reg
+  - silergy,fixed-microvolt
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@65 {
+            compatible = "silergy,sy8106a";
+            reg = <0x65>;
+            regulator-name = "sy8106a-vdd";
+            silergy,fixed-microvolt = <1200000>;
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1400000>;
+            regulator-boot-on;
+            regulator-always-on;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml
new file mode 100644
index 000000000000..82af4d656177
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/silergy,sy8824x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy8824c,sy8824e,sy20276 and sy20278 PMIC
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - silergy,sy8824c
+      - silergy,sy8824e
+      - silergy,sy20276
+      - silergy,sy20278
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@60 {
+          compatible = "silergy,sy8824c";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <1150000>;
+          reg = <0x60>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml
new file mode 100644
index 000000000000..b222adabc7b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/silergy,sy8827n.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy8827n PMIC
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - silergy,sy8827n
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO to enable/disable the regulator.
+    maxItems: 1
+
+  silergy,vsel-state-high:
+    type: boolean
+    description:
+      Indicates if the VSEL pin is set to high.
+      If this property is missing, assume the VSEL pin is set to low.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@60 {
+          compatible = "silergy,sy8827n";
+          reg = <0x60>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml b/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml
new file mode 100644
index 000000000000..9d84117530ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/siliconmitus,sm5703-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Mitus SM5703 multi function device regulators
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+description: |
+  SM5703 regulators node should be a sub node of the SM5703 MFD node. See SM5703 MFD
+  bindings at Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml
+  Regulator nodes should be named as USBLDO_<number>, BUCK, VBUS, LDO_<number>.
+  The definition for each of these nodes is defined using the standard
+  binding for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+properties:
+  buck:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for the BUCK regulator.
+
+  vbus:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for the VBUS regulator.
+
+patternProperties:
+  "^ldo[1-3]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+  "^usbldo[1-2]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for a single USBLDO regulator.
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
new file mode 100644
index 000000000000..c0acf949753d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/socionext,uniphier-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier regulator controller
+
+description: |
+  This regulator controls VBUS and belongs to USB3 glue layer. Before using
+  the regulator, it is necessary to control the clocks and resets to enable
+  this layer. These clocks and resets should be described in each property.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+# USB3 Controller
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-usb3-regulator
+      - socionext,uniphier-pro5-usb3-regulator
+      - socionext,uniphier-pxs2-usb3-regulator
+      - socionext,uniphier-ld20-usb3-regulator
+      - socionext,uniphier-pxs3-usb3-regulator
+      - socionext,uniphier-nx1-usb3-regulator
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names: true
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names: true
+
+allOf:
+  - $ref: "regulator.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pro4-usb3-regulator
+              - socionext,uniphier-pro5-usb3-regulator
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    usb-glue@65b00000 {
+        compatible = "simple-mfd";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65b00000 0x400>;
+
+        usb_vbus0: regulators@100 {
+            compatible = "socionext,uniphier-ld20-usb3-regulator";
+            reg = <0x100 0x10>;
+            clock-names = "link";
+            clocks = <&sys_clk 14>;
+            reset-names = "link";
+            resets = <&sys_rst 14>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
index 64f1183ce841..38bdaef4fa39 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 booster for ADC analog input switches bindings
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 description: |
   Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used
@@ -23,8 +23,7 @@ properties:
       - st,stm32mp1-booster
 
   st,syscfg:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: "/schemas/types.yaml#/definitions/phandle"
     description: phandle to system configuration controller.
 
   vdda-supply:
@@ -35,6 +34,8 @@ required:
   - st,syscfg
   - vdda-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     regulator-booster {
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
index 33cdaeb25aee..a5a27ee0a9e6 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
@@ -12,7 +12,7 @@ description: |
   components through the dedicated VREF+ pin.
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 allOf:
   - $ref: "regulator.yaml#"
@@ -36,6 +36,8 @@ required:
   - clocks
   - vdda-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/stm32mp1-clks.h>
@@ -49,4 +51,3 @@ examples:
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
index 8d8f38fe85dc..bd07b9c81570 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STM32MP1 PWR voltage regulators
 
 maintainers:
-  - Pascal Paillet <p.paillet@st.com>
+  - Pascal Paillet <p.paillet@foss.st.com>
 
 properties:
   compatible:
@@ -26,8 +26,7 @@ patternProperties:
   "^(reg11|reg18|usb33)$":
     type: object
 
-    allOf:
-      - $ref: "regulator.yaml#"
+    $ref: "regulator.yaml#"
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
deleted file mode 100644
index 6189df71ea98..000000000000
--- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-STMicroelectronics STPMIC1 Voltage regulators
-
-Regulator Nodes are optional depending on needs.
-
-Available Regulators in STPMIC1 device are:
-  - buck1 for Buck BUCK1
-  - buck2 for Buck BUCK2
-  - buck3 for Buck BUCK3
-  - buck4 for Buck BUCK4
-  - ldo1 for LDO LDO1
-  - ldo2 for LDO LDO2
-  - ldo3 for LDO LDO3
-  - ldo4 for LDO LDO4
-  - ldo5 for LDO LDO5
-  - ldo6 for LDO LDO6
-  - vref_ddr for LDO Vref DDR
-  - boost for Buck BOOST
-  - pwr_sw1 for VBUS_OTG switch
-  - pwr_sw2 for SW_OUT switch
-
-Switches are fixed voltage regulators with only enable/disable capability.
-
-Optional properties:
-- st,mask-reset: mask reset for this regulator: the regulator configuration
-  is maintained during pmic reset.
-- regulator-over-current-protection:
-    if set, all regulators are switched off in case of over-current detection
-    on this regulator,
-    if not set, the driver only sends an over-current event.
-- interrupts: index of current limit detection interrupt
-- <regulator>-supply: phandle to the parent supply/regulator node
-	each regulator supply can be described except vref_ddr.
-- regulator-active-discharge: can be used on pwr_sw1 and pwr_sw2.
-
-Example:
-regulators {
-	compatible = "st,stpmic1-regulators";
-
-	ldo6-supply = <&v3v3>;
-
-	vdd_core: buck1 {
-		regulator-name = "vdd_core";
-		interrupts = <IT_CURLIM_BUCK1 0>;
-		st,mask-reset;
-		regulator-pull-down;
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <1200000>;
-	};
-
-	v3v3: buck4 {
-		regulator-name = "v3v3";
-		interrupts = <IT_CURLIM_BUCK4 0>;
-
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	v1v8: ldo6 {
-		regulator-name = "v1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-over-current-protection;
-	};
-};
diff --git a/Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt b/Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt
deleted file mode 100644
index 39a8ca73f572..000000000000
--- a/Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-SY8106A Voltage regulator
-
-Required properties:
-- compatible: Must be "silergy,sy8106a"
-- reg: I2C slave address - must be <0x65>
-- silergy,fixed-microvolt - the voltage when I2C regulating is disabled (set
-  by external resistor like a fixed voltage)
-
-Any property defined as part of the core regulator binding, defined in
-./regulator.txt, can also be used.
-
-Example:
-
-	sy8106a {
-		compatible = "silergy,sy8106a";
-		reg = <0x65>;
-		regulator-name = "sy8106a-vdd";
-		silergy,fixed-microvolt = <1200000>;
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/sy8824x.txt b/Documentation/devicetree/bindings/regulator/sy8824x.txt
deleted file mode 100644
index c5e95850c427..000000000000
--- a/Documentation/devicetree/bindings/regulator/sy8824x.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-SY8824C/SY8824E/SY20276 Voltage regulator
-
-Required properties:
-- compatible: Must be one of the following.
-	"silergy,sy8824c"
-	"silergy,sy8824e"
-	"silergy,sy20276"
-	"silergy,sy20278"
-- reg: I2C slave address
-
-Any property defined as part of the core regulator binding, defined in
-./regulator.txt, can also be used.
-
-Example:
-
-	vcore: regulator@00 {
-		compatible = "silergy,sy8824c";
-		reg = <0x66>;
-		regulator-name = "vcore";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1150000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
new file mode 100644
index 000000000000..12aeddedde05
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps62360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TPS6236x Voltage Regulators
+
+maintainers:
+  - Laxman Dewangan <ldewangan@nvidia.com>
+
+description: |
+  The TPS6236x are a family of step down dc-dc converter with
+  an input voltage range of 2.5V to 5.5V. The devices provide
+  up to 3A peak load current, and an output voltage range of
+  0.77V to 1.4V (TPS62360/62) and 0.5V to 1.77V (TPS62361B/63).
+
+  Datasheet is available at:
+  https://www.ti.com/lit/gpn/tps62360
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ti,tps62360
+      - ti,tps62361
+      - ti,tps62362
+      - ti,tps62363
+
+  reg:
+    maxItems: 1
+
+  ti,vsel0-gpio:
+    description: |
+      GPIO for controlling VSEL0 line. If this property
+      is missing, then assume that there is no GPIO for
+      VSEL0 control.
+    maxItems: 1
+
+  ti,vsel1-gpio:
+    description: |
+      GPIO for controlling VSEL1 line. If this property
+      is missing, then assume that there is no GPIO for
+      VSEL1 control.
+    maxItems: 1
+
+  ti,enable-vout-discharge:
+    description: Enable output discharge.
+    type: boolean
+
+  ti,enable-pull-down:
+    description: Enable pull down.
+    type: boolean
+
+  ti,vsel0-state-high:
+    description: |
+      Initial state of VSEL0 input is high. If this property
+      is missing, then assume the state as low.
+    type: boolean
+
+  ti,vsel1-state-high:
+    description: |
+      Initial state of VSEL1 input is high. If this property
+      is missing, then assume the state as low.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@60 {
+            compatible = "ti,tps62361";
+            reg = <0x60>;
+            regulator-name = "tps62361-vout";
+            regulator-min-microvolt = <500000>;
+            regulator-max-microvolt = <1500000>;
+            regulator-boot-on;
+            ti,vsel0-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+            ti,vsel1-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+            ti,vsel0-state-high;
+            ti,vsel1-state-high;
+            ti,enable-pull-down;
+            ti,enable-vout-discharge;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml
new file mode 100644
index 000000000000..0f29c75f42ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps62864.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS62864/TPS6286/TPS62868/TPS62869 voltage regulator
+
+maintainers:
+  - Vincent Whitchurch <vincent.whitchurch@axis.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,tps62864
+      - ti,tps62866
+      - ti,tps62868
+      - ti,tps62869
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    properties:
+      "SW":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/regulator/ti,tps62864.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@48 {
+        compatible = "ti,tps62864";
+        reg = <0x48>;
+
+        regulators {
+          SW {
+            regulator-name = "+0.85V";
+            regulator-min-microvolt = <800000>;
+            regulator-max-microvolt = <890000>;
+            regulator-initial-mode = <TPS62864_MODE_FPWM>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml
new file mode 100644
index 000000000000..78be79930fda
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps65219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI tps65219 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Jerome Neanne <jerome.neanne@baylibre.com>
+
+description: |
+  Regulator nodes should be named to buck<number> and ldo<number>.
+
+properties:
+  compatible:
+    enum:
+      - ti,tps65219
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    type: boolean
+    description: Optional property that indicates that this device is
+      controlling system power.
+
+  interrupts:
+    description: Short-circuit, over-current, under-voltage for regulators, PB interrupts.
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 1
+
+  ti,power-button:
+    type: boolean
+    description: |
+      Optional property that sets the EN/PB/VSENSE pin to be a
+      power-button.
+      TPS65219 has a multipurpose pin called EN/PB/VSENSE that can be either
+      1. EN in which case it functions as an enable pin.
+      2. VSENSE which compares the voltages and triggers an automatic
+      on/off request.
+      3. PB in which case it can be configured to trigger an interrupt
+      to the SoC.
+      ti,power-button reflects the last one of those options
+      where the board has a button wired to the pin and triggers
+      an interrupt on pressing it.
+
+patternProperties:
+  "^buck[1-3]-supply$":
+    description: Input supply phandle of one regulator.
+
+  "^ldo[1-4]-supply$":
+    description: Input supply phandle of one regulator.
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller
+
+    patternProperties:
+      "^ldo[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single LDO regulator.
+
+        unevaluatedProperties: false
+
+      "^buck[1-3]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single BUCK regulator.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tps65219: pmic@30 {
+            compatible = "ti,tps65219";
+            reg = <0x30>;
+            buck1-supply = <&vcc_3v3_sys>;
+            buck2-supply = <&vcc_3v3_sys>;
+            buck3-supply = <&vcc_3v3_sys>;
+            ldo1-supply = <&vcc_3v3_sys>;
+            ldo2-supply = <&buck2_reg>;
+            ldo3-supply = <&vcc_3v3_sys>;
+            ldo4-supply = <&vcc_3v3_sys>;
+
+            pinctrl-0 = <&pmic_irq_pins_default>;
+
+            interrupt-parent = <&gic500>;
+            interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+            ti,power-button;
+
+            regulators {
+                buck1_reg: buck1 {
+                    regulator-name = "VDD_CORE";
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <750000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck2_reg: buck2 {
+                    regulator-name = "VCC1V8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck3_reg: buck3 {
+                    regulator-name = "VDD_LPDDR4";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo1_reg: ldo1 {
+                    regulator-name = "VDDSHV_SD_IO_PMIC";
+                    regulator-min-microvolt = <33000000>;
+                    regulator-max-microvolt = <33000000>;
+                };
+
+                ldo2_reg: ldo2 {
+                    regulator-name = "VDDAR_CORE";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <850000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo3_reg: ldo3 {
+                    regulator-name = "VDDA_1V8";
+                    regulator-min-microvolt = <18000000>;
+                    regulator-max-microvolt = <18000000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo4_reg: ldo4 {
+                    regulator-name = "VDD_PHY_2V5";
+                    regulator-min-microvolt = <25000000>;
+                    regulator-max-microvolt = <25000000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
deleted file mode 100644
index 1b20c3dbcdb8..000000000000
--- a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-TPS62360 Voltage regulators
-
-Required properties:
-- compatible: Must be one of the following.
-	"ti,tps62360"
-	"ti,tps62361",
-	"ti,tps62362",
-	"ti,tps62363",
-- reg: I2C slave address
-
-Optional properties:
-- ti,enable-vout-discharge: Enable output discharge. This is boolean value.
-- ti,enable-pull-down: Enable pull down. This is boolean value.
-- ti,vsel0-gpio: GPIO for controlling VSEL0 line.
-  If this property is missing, then assume that there is no GPIO
-  for vsel0 control.
-- ti,vsel1-gpio: Gpio for controlling VSEL1 line.
-  If this property is missing, then assume that there is no GPIO
-  for vsel1 control.
-- ti,vsel0-state-high: Initial state of vsel0 input is high.
-  If this property is missing, then assume the state as low (0).
-- ti,vsel1-state-high: Initial state of vsel1 input is high.
-  If this property is missing, then assume the state as low (0).
-
-Any property defined as part of the core regulator binding, defined in
-regulator.txt, can also be used.
-
-Example:
-
-	abc: tps62360 {
-		compatible = "ti,tps62361";
-		reg =  <0x60>;
-		regulator-name = "tps62361-vout";
-		regulator-min-microvolt = <500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-boot-on
-		ti,vsel0-gpio = <&gpio1 16 0>;
-		ti,vsel1-gpio = <&gpio1 17 0>;
-		ti,vsel0-state-high;
-		ti,vsel1-state-high;
-		ti,enable-pull-down;
-		ti,enable-force-pwm;
-		ti,enable-vout-discharge;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
deleted file mode 100644
index 94fd38b0d163..000000000000
--- a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Socionext UniPhier Regulator Controller
-
-This describes the devicetree bindings for regulator controller implemented
-on Socionext UniPhier SoCs.
-
-USB3 Controller
----------------
-
-This regulator controls VBUS and belongs to USB3 glue layer. Before using
-the regulator, it is necessary to control the clocks and resets to enable
-this layer. These clocks and resets should be described in each property.
-
-Required properties:
-- compatible: Should be
-    "socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
-    "socionext,uniphier-pro5-usb3-regulator" - for Pro5 SoC
-    "socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
-    "socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
-    "socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
-- reg: Specifies offset and length of the register set for the device.
-- clocks: A list of phandles to the clock gate for USB3 glue layer.
-	According to the clock-names, appropriate clocks are required.
-- clock-names: Should contain
-    "gio", "link" - for Pro4 and Pro5 SoCs
-    "link"        - for others
-- resets: A list of phandles to the reset control for USB3 glue layer.
-	According to the reset-names, appropriate resets are required.
-- reset-names: Should contain
-    "gio", "link" - for Pro4 and Pro5 SoCs
-    "link"        - for others
-
-See Documentation/devicetree/bindings/regulator/regulator.txt
-for more details about the regulator properties.
-
-Example:
-
-	usb-glue@65b00000 {
-		compatible = "socionext,uniphier-ld20-dwc3-glue",
-			     "simple-mfd";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x65b00000 0x400>;
-
-		usb_vbus0: regulators@100 {
-			compatible = "socionext,uniphier-ld20-usb3-regulator";
-			reg = <0x100 0x10>;
-			clock-names = "link";
-			clocks = <&sys_clk 14>;
-			reset-names = "link";
-			resets = <&sys_rst 14>;
-		};
-
-		phy {
-			...
-			phy-supply = <&usb_vbus0>;
-		};
-		...
-	};
diff --git a/Documentation/devicetree/bindings/regulator/vexpress.txt b/Documentation/devicetree/bindings/regulator/vexpress.txt
index d775f72487aa..1c2e92c7831e 100644
--- a/Documentation/devicetree/bindings/regulator/vexpress.txt
+++ b/Documentation/devicetree/bindings/regulator/vexpress.txt
@@ -4,7 +4,7 @@ Versatile Express voltage regulators
 Requires node properties:
 - "compatible" value: "arm,vexpress-volt"
 - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
-  (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+  (see Documentation/devicetree/bindings/arm/vexpress-config.yaml
   for more details)
 
 Required regulator properties:
diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
new file mode 100644
index 000000000000..dd7a2f92634c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/vqmmc-ipq4019-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ4019 VQMMC SD LDO regulator
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Qualcomm IPQ4019 SoC-s feature a built a build SD/EMMC controller,
+  in order to support both 1.8 and 3V I/O voltage levels an LDO
+  controller is also embedded.
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    const: qcom,vqmmc-ipq4019-regulator
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    regulator@1948000 {
+      compatible = "qcom,vqmmc-ipq4019-regulator";
+      reg = <0x01948000 0x4>;
+      regulator-name = "vqmmc";
+      regulator-min-microvolt = <1500000>;
+      regulator-max-microvolt = <3000000>;
+      regulator-always-on;
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
new file mode 100644
index 000000000000..7b4ae5d23351
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona/Madera class audio SoCs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  These devices are audio SoCs with extensive digital capabilities and a
+  range of analogue I/O.
+
+  This document lists regulator specific bindings, see the primary binding
+  document. For Wolfson Microelectronic Arizona codecs ../mfd/wlf,arizona.yaml
+  and for Cirrus Logic Madera codecs ../mfd/madera.txt
+
+properties:
+  wlf,ldoena:
+    description:
+      GPIO specifier for the GPIO controlling LDOENA.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    maxItems: 1
+
+  ldo1:
+    description:
+      Initial data for the LDO1 regulator.
+    $ref: "regulator.yaml#"
+    type: object
+
+  micvdd:
+    description:
+      Initial data for the MICVDD regulator.
+    $ref: "regulator.yaml#"
+    type: object
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
new file mode 100644
index 000000000000..d892d29a656b
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson AO ARC Remote Processor bindings
+
+description:
+  Amlogic Meson6, Meson8, Meson8b and Meson8m2 SoCs embed an ARC core
+  controller for always-on operations, typically used for managing
+  system suspend. Meson6 and older use a ARC core based on the ARCv1
+  ISA, while Meson8, Meson8b and Meson8m2 use an ARC EM4 (ARCv2 ISA)
+  core.
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson8-ao-arc
+          - amlogic,meson8b-ao-arc
+      - const: amlogic,meson-mx-ao-arc
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      The name of the firmware which should be loaded for this remote
+      processor.
+
+  reg:
+    description:
+      Address ranges of the remap and CPU control addresses for the
+      remote processor.
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: remap
+      - const: cpu
+
+  resets:
+    minItems: 1
+
+  clocks:
+    minItems: 1
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandles to a reserved SRAM region which is used as the memory of
+      the ARC core. The region should be defined as child nodes of the
+      AHB SRAM node as per the generic bindings in
+      Documentation/devicetree/bindings/sram/sram.yaml
+
+  amlogic,secbus2:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle to the SECBUS2 region which contains some configuration
+      bits of this remote processor
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - resets
+  - clocks
+  - sram
+  - amlogic,secbus2
+
+additionalProperties: false
+
+examples:
+  - |
+    remoteproc@1c {
+      compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+      reg = <0x1c 0x8>, <0x38 0x8>;
+      reg-names = "remap", "cpu";
+      resets = <&media_cpu_reset>;
+      clocks = <&media_cpu_clock>;
+      sram = <&ahb_sram_ao_arc>;
+      amlogic,secbus2 = <&secbus2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
new file mode 100644
index 000000000000..3a1f59ad79e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NXP i.MX Co-Processor Bindings
+
+description:
+  This binding provides support for ARM Cortex M4 Co-processor found on some NXP iMX SoCs.
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-cm4
+      - fsl,imx7d-cm4
+      - fsl,imx7ulp-cm4
+      - fsl,imx8mm-cm4
+      - fsl,imx8mn-cm7
+      - fsl,imx8mp-cm7
+      - fsl,imx8mq-cm4
+      - fsl,imx8ulp-cm33
+      - fsl,imx93-cm33
+
+  clocks:
+    maxItems: 1
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to syscon block which provide access to System Reset Controller
+
+  mbox-names:
+    items:
+      - const: tx
+      - const: rx
+      - const: rxdb
+
+  mboxes:
+    description:
+      This property is required only if the rpmsg/virtio functionality is used.
+      List of <&phandle type channel> - 1 channel for TX, 1 channel for RX, 1 channel for RXDB.
+      (see mailbox/fsl,mu.yaml)
+    minItems: 1
+    maxItems: 3
+
+  memory-region:
+    description:
+      If present, a phandle for a reserved memory area that used for vdev buffer,
+      resource table, vring region and others used by remote processor.
+    minItems: 1
+    maxItems: 32
+
+  fsl,auto-boot:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicate whether need to load the default firmware and start the remote
+      processor automatically.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7d-clock.h>
+    m4_reserved_sysmem1: cm4@80000000 {
+      reg = <0x80000000 0x80000>;
+    };
+
+    m4_reserved_sysmem2: cm4@81000000 {
+      reg = <0x81000000 0x80000>;
+    };
+
+    imx7d-cm4 {
+      compatible	= "fsl,imx7d-cm4";
+      memory-region	= <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
+      syscon		= <&src>;
+      clocks		= <&clks IMX7D_ARM_M4_ROOT_CLK>;
+    };
+
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+
+    imx8mm-cm4 {
+      compatible = "fsl,imx8mm-cm4";
+      clocks = <&clk IMX8MM_CLK_M4_DIV>;
+      mbox-names = "tx", "rx", "rxdb";
+      mboxes = <&mu 0 1
+                &mu 1 1
+                &mu 3 1>;
+      memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>, <&rsc_table>;
+      syscon = <&src>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt b/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt
deleted file mode 100644
index fbcefd965dc4..000000000000
--- a/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-NXP iMX6SX/iMX7D Co-Processor Bindings
-----------------------------------------
-
-This binding provides support for ARM Cortex M4 Co-processor found on some
-NXP iMX SoCs.
-
-Required properties:
-- compatible		Should be one of:
-				"fsl,imx7d-cm4"
-				"fsl,imx6sx-cm4"
-- clocks		Clock for co-processor (See: ../clock/clock-bindings.txt)
-- syscon		Phandle to syscon block which provide access to
-			System Reset Controller
-
-Optional properties:
-- memory-region		list of phandels to the reserved memory regions.
-			(See: ../reserved-memory/reserved-memory.txt)
-
-Example:
-	m4_reserved_sysmem1: cm4@80000000 {
-		reg = <0x80000000 0x80000>;
-	};
-
-	m4_reserved_sysmem2: cm4@81000000 {
-		reg = <0x81000000 0x80000>;
-	};
-
-	imx7d-cm4 {
-		compatible	= "fsl,imx7d-cm4";
-		memory-region	= <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
-		syscon		= <&src>;
-		clocks		= <&clks IMX7D_ARM_M4_ROOT_CLK>;
-	};
diff --git a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
new file mode 100644
index 000000000000..aaaaabad46ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/ingenic,vpu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Ingenic Video Processing Unit bindings
+
+description:
+  Inside the Video Processing Unit (VPU) of the recent JZ47xx SoCs from
+  Ingenic is a second Xburst MIPS CPU very similar to the main core.
+  This document describes the devicetree bindings for this auxiliary
+  processor.
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: ingenic,jz4770-vpu-rproc
+
+  reg:
+    items:
+      - description: aux registers
+      - description: tcsm0 registers
+      - description: tcsm1 registers
+      - description: sram registers
+
+  reg-names:
+    items:
+      - const: aux
+      - const: tcsm0
+      - const: tcsm1
+      - const: sram
+
+  clocks:
+    items:
+      - description: aux clock
+      - description: vpu clock
+
+  clock-names:
+    items:
+      - const: aux
+      - const: vpu
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+
+    vpu: video-decoder@132a0000 {
+      compatible = "ingenic,jz4770-vpu-rproc";
+
+      reg = <0x132a0000 0x20>, /* AUX */
+            <0x132b0000 0x4000>, /* TCSM0 */
+            <0x132c0000 0xc000>, /* TCSM1 */
+            <0x132f0000 0x7000>; /* SRAM */
+      reg-names = "aux", "tcsm0", "tcsm1", "sram";
+
+      clocks = <&cgu JZ4770_CLK_AUX>, <&cgu JZ4770_CLK_VPU>;
+      clock-names = "aux", "vpu";
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt b/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
deleted file mode 100644
index 3ba668bab14b..000000000000
--- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Mediatek SCP Bindings
-----------------------------------------
-
-This binding provides support for ARM Cortex M4 Co-processor found on some
-Mediatek SoCs.
-
-Required properties:
-- compatible		Should be "mediatek,mt8183-scp"
-- reg			Should contain the address ranges for the two memory
-			regions, SRAM and CFG.
-- reg-names		Contains the corresponding names for the two memory
-			regions. These should be named "sram" & "cfg".
-- clocks		Clock for co-processor (See: ../clock/clock-bindings.txt)
-- clock-names		Contains the corresponding name for the clock. This
-			should be named "main".
-
-Subnodes
---------
-
-Subnodes of the SCP represent rpmsg devices. The names of the devices are not
-important. The properties of these nodes are defined by the individual bindings
-for the rpmsg devices - but must contain the following property:
-
-- mtk,rpmsg-name	Contains the name for the rpmsg device. Used to match
-			the subnode to rpmsg device announced by SCP.
-
-Example:
-
-	scp: scp@10500000 {
-		compatible = "mediatek,mt8183-scp";
-		reg = <0 0x10500000 0 0x80000>,
-		      <0 0x105c0000 0 0x5000>;
-		reg-names = "sram", "cfg";
-		clocks = <&infracfg CLK_INFRA_SCPSYS>;
-		clock-names = "main";
-	};
diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
new file mode 100644
index 000000000000..7e091eaffc18
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/mtk,scp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek SCP Bindings
+
+maintainers:
+  - Tinghan Shen <tinghan.shen@mediatek.com>
+
+description:
+  This binding provides support for ARM Cortex M4 Co-processor found on some
+  Mediatek SoCs.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-scp
+      - mediatek,mt8186-scp
+      - mediatek,mt8188-scp
+      - mediatek,mt8192-scp
+      - mediatek,mt8195-scp
+
+  reg:
+    description:
+      Should contain the address ranges for memory regions SRAM, CFG, and,
+      on some platforms, L1TCM.
+    minItems: 2
+    maxItems: 3
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: sram
+      - const: cfg
+      - const: l1tcm
+
+  clocks:
+    description:
+      Clock for co-processor (see ../clock/clock-bindings.txt).
+      Required by mt8183 and mt8192.
+    maxItems: 1
+
+  clock-names:
+    const: main
+
+  interrupts:
+    maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      If present, name (or relative path) of the file within the
+      firmware search path containing the firmware image used when
+      initializing SCP.
+
+  memory-region:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8183-scp
+            - mediatek,mt8192-scp
+    then:
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8183-scp
+            - mediatek,mt8186-scp
+            - mediatek,mt8188-scp
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          maxItems: 2
+
+additionalProperties:
+  type: object
+  description:
+    Subnodes of the SCP represent rpmsg devices. The names of the devices
+    are not important. The properties of these nodes are defined by the
+    individual bindings for the rpmsg devices.
+  properties:
+    mediatek,rpmsg-name:
+      $ref: /schemas/types.yaml#/definitions/string-array
+      description:
+        Contains the name for the rpmsg device. Used to match
+        the subnode to rpmsg device announced by SCP.
+
+  required:
+    - mediatek,rpmsg-name
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8192-clk.h>
+
+    scp@10500000 {
+        compatible = "mediatek,mt8192-scp";
+        reg = <0x10500000 0x80000>,
+              <0x10700000 0x8000>,
+              <0x10720000 0xe0000>;
+        reg-names = "sram", "cfg", "l1tcm";
+        clocks = <&infracfg CLK_INFRA_SCPSYS>;
+        clock-names = "main";
+
+        cros_ec {
+            mediatek,rpmsg-name = "cros-ec-rpmsg";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
deleted file mode 100644
index 9938918b2fea..000000000000
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
+++ /dev/null
@@ -1,200 +0,0 @@
-Qualcomm ADSP Peripheral Image Loader
-
-This document defines the binding for a component that loads and boots firmware
-on the Qualcomm ADSP Hexagon core.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,msm8974-adsp-pil"
-		    "qcom,msm8996-adsp-pil"
-		    "qcom,msm8996-slpi-pil"
-		    "qcom,msm8998-adsp-pas"
-		    "qcom,msm8998-slpi-pas"
-		    "qcom,qcs404-adsp-pas"
-		    "qcom,qcs404-cdsp-pas"
-		    "qcom,qcs404-wcss-pas"
-		    "qcom,sdm845-adsp-pas"
-		    "qcom,sdm845-cdsp-pas"
-		    "qcom,sm8150-adsp-pas"
-		    "qcom,sm8150-cdsp-pas"
-		    "qcom,sm8150-mpss-pas"
-		    "qcom,sm8150-slpi-pas"
-
-- interrupts-extended:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the interrupts that match interrupt-names
-
-- interrupt-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: The interrupts needed depends on the compatible
-		    string:
-	qcom,msm8974-adsp-pil:
-	qcom,msm8996-adsp-pil:
-	qcom,msm8996-slpi-pil:
-	qcom,msm8998-adsp-pas:
-	qcom,msm8998-slpi-pas:
-	qcom,qcs404-adsp-pas:
-	qcom,qcs404-cdsp-pas:
-	qcom,sdm845-adsp-pas:
-	qcom,sdm845-cdsp-pas:
-	qcom,sm8150-adsp-pas:
-	qcom,sm8150-cdsp-pas:
-	qcom,sm8150-slpi-pas:
-		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
-	qcom,qcs404-wcss-pas:
-	qcom,sm8150-mpss-pas:
-		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
-		    "shutdown-ack"
-
-- firmware-name:
-	Usage: optional
-	Value type: <string>
-	Definition: must list the relative firmware image path for the
-		    Hexagon Core.
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the xo clock and optionally aggre2 clock to be
-		    held on behalf of the booting Hexagon core
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "xo" and optionally include "aggre2"
-
-- cx-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the regulator to be held on behalf of the
-		    booting Hexagon core
-
-- px-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the px regulator to be held on behalf of the
-		    booting Hexagon core
-
-- power-domains:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to power-domains that match the power-domain-names
-
-- power-domain-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: The power-domains needed depend on the compatible string:
-	qcom,msm8974-adsp-pil:
-	qcom,msm8996-adsp-pil:
-	qcom,msm8998-adsp-pas:
-		    must be "cx"
-	qcom,msm8996-slpi-pil:
-		    must be "ss_cx"
-	qcom,msm8998-slpi-pas:
-		    must be "ssc_cx"
-	qcom,qcs404-adsp-pas:
-		    must be "lpi_cx"
-	qcom,qcs404-cdsp-pas:
-	qcom,qcs404-wcss-pas:
-		    must be "mx"
-	qcom,sdm845-adsp-pas:
-	qcom,sdm845-cdsp-pas:
-	qcom,sm8150-adsp-pas:
-	qcom,sm8150-cdsp-pas:
-		    must be "cx", "load_state"
-	qcom,sm8150-mpss-pas:
-		    must be "cx", "load_state", "mss"
-	qcom,sm8150-slpi-pas:
-		    must be "lcx", "lmx", "load_state"
-
-- memory-region:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the reserved-memory for the ADSP
-
-- qcom,smem-states:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the smem state for requesting the ADSP to
-		    shut down
-
-- qcom,smem-state-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "stop"
-
-
-= SUBNODES
-The adsp node may have an subnode named either "smd-edge" or "glink-edge" that
-describes the communication edge, channels and devices related to the ADSP.
-See ../soc/qcom/qcom,smd.txt and ../soc/qcom/qcom,glink.txt for details on how
-to describe these.
-
-
-= EXAMPLE
-The following example describes the resources needed to boot control the
-ADSP, as it is found on MSM8974 boards.
-
-	adsp {
-		compatible = "qcom,msm8974-adsp-pil";
-
-		interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "wdog",
-				  "fatal",
-				  "ready",
-				  "handover",
-				  "stop-ack";
-
-		clocks = <&rpmcc RPM_CXO_CLK>;
-		clock-names = "xo";
-
-		cx-supply = <&pm8841_s2>;
-
-		memory-region = <&adsp_region>;
-
-		qcom,smem-states = <&adsp_smp2p_out 0>;
-		qcom,smem-state-names = "stop";
-
-		smd-edge {
-			interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&apcs 8 8>;
-			qcom,smd-edge = <1>;
-		};
-	};
-
-The following example describes the resources needed to boot control the
-SLPI, as it is found on MSM8996 boards.
-
-	slpi {
-		compatible = "qcom,msm8996-slpi-pil";
-		interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>,
-				      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-				      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-				      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-				      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "wdog",
-				  "fatal",
-				  "ready",
-				  "handover",
-				  "stop-ack";
-
-		clocks = <&rpmcc MSM8996_RPM_SMD_XO_CLK_SRC>,
-		         <&rpmcc MSM8996_RPM_SMD_AGGR2_NOC_CLK>;
-		clock-names = "xo", "aggre2";
-
-		cx-supply = <&pm8994_l26>;
-		px-supply = <&pm8994_lvs2>;
-
-		memory-region = <&slpi_region>;
-		qcom,smem-states = <&slpi_smp2p_out 0>;
-		qcom,smem-state-names = "stop";
-        };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
new file mode 100644
index 000000000000..db9e0f0c2bea
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -0,0 +1,611 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,adsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ADSP Peripheral Image Loader binding
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  This document defines the binding for a component that loads and boots
+  firmware on the Qualcomm ADSP Hexagon core.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8226-adsp-pil
+      - qcom,msm8974-adsp-pil
+      - qcom,msm8996-adsp-pil
+      - qcom,msm8996-slpi-pil
+      - qcom,msm8998-adsp-pas
+      - qcom,msm8998-slpi-pas
+      - qcom,qcs404-adsp-pas
+      - qcom,qcs404-cdsp-pas
+      - qcom,qcs404-wcss-pas
+      - qcom,sc7180-mpss-pas
+      - qcom,sc7280-mpss-pas
+      - qcom,sc8180x-adsp-pas
+      - qcom,sc8180x-cdsp-pas
+      - qcom,sc8180x-mpss-pas
+      - qcom,sc8280xp-adsp-pas
+      - qcom,sc8280xp-nsp0-pas
+      - qcom,sc8280xp-nsp1-pas
+      - qcom,sdm660-adsp-pas
+      - qcom,sdm845-adsp-pas
+      - qcom,sdm845-cdsp-pas
+      - qcom,sdx55-mpss-pas
+      - qcom,sm6350-adsp-pas
+      - qcom,sm6350-cdsp-pas
+      - qcom,sm6350-mpss-pas
+      - qcom,sm8150-adsp-pas
+      - qcom,sm8150-cdsp-pas
+      - qcom,sm8150-mpss-pas
+      - qcom,sm8150-slpi-pas
+      - qcom,sm8250-adsp-pas
+      - qcom,sm8250-cdsp-pas
+      - qcom,sm8250-slpi-pas
+      - qcom,sm8350-adsp-pas
+      - qcom,sm8350-cdsp-pas
+      - qcom,sm8350-slpi-pas
+      - qcom,sm8350-mpss-pas
+      - qcom,sm8450-adsp-pas
+      - qcom,sm8450-cdsp-pas
+      - qcom,sm8450-mpss-pas
+      - qcom,sm8450-slpi-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 8
+
+  clock-names:
+    minItems: 1
+    maxItems: 8
+
+  interconnects:
+    maxItems: 1
+
+  interrupts:
+    minItems: 5
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    minItems: 5
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names:
+    minItems: 1
+    maxItems: 3
+
+  cx-supply:
+    description: Phandle to the CX regulator
+
+  px-supply:
+    description: Phandle to the PX regulator
+
+  power-domains:
+    minItems: 1
+    maxItems: 3
+
+  power-domain-names:
+    minItems: 1
+    maxItems: 3
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Firmware name for the Hexagon core
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: stop
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle reference to a syscon representing TCSR
+          - description: offsets within syscon for q6 halt registers
+          - description: offsets within syscon for modem halt registers
+          - description: offsets within syscon for nc halt registers
+    description:
+      Phandle reference to a syscon representing TCSR followed by the
+      three offsets within syscon for q6, modem and nc halt registers.
+
+  smd-edge:
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+    description:
+      Qualcomm Shared Memory subnode which represents communication edge,
+      channels and devices related to the ADSP.
+    unevaluatedProperties: false
+
+  glink-edge:
+    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the ADSP.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - memory-region
+  - qcom,smem-states
+  - qcom,smem-state-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-adsp-pil
+              - qcom,msm8974-adsp-pil
+              - qcom,msm8996-adsp-pil
+              - qcom,msm8996-slpi-pil
+              - qcom,msm8998-adsp-pas
+              - qcom,qcs404-adsp-pas
+              - qcom,qcs404-wcss-pas
+              - qcom,sc7280-mpss-pas
+              - qcom,sc8180x-adsp-pas
+              - qcom,sc8180x-cdsp-pas
+              - qcom,sc8180x-mpss-pas
+              - qcom,sc8280xp-adsp-pas
+              - qcom,sc8280xp-nsp0-pas
+              - qcom,sc8280xp-nsp1-pas
+              - qcom,sdm845-adsp-pas
+              - qcom,sdm845-cdsp-pas
+              - qcom,sm6350-adsp-pas
+              - qcom,sm6350-cdsp-pas
+              - qcom,sm6350-mpss-pas
+              - qcom,sm8150-adsp-pas
+              - qcom,sm8150-cdsp-pas
+              - qcom,sm8150-mpss-pas
+              - qcom,sm8150-slpi-pas
+              - qcom,sm8250-adsp-pas
+              - qcom,sm8250-cdsp-pas
+              - qcom,sm8250-slpi-pas
+              - qcom,sm8350-adsp-pas
+              - qcom,sm8350-cdsp-pas
+              - qcom,sm8350-slpi-pas
+              - qcom,sm8350-mpss-pas
+              - qcom,sm8450-adsp-pas
+              - qcom,sm8450-cdsp-pas
+              - qcom,sm8450-slpi-pas
+              - qcom,sm8450-mpss-pas
+    then:
+      properties:
+        clocks:
+          items:
+            - description: XO clock
+        clock-names:
+          items:
+            - const: xo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-slpi-pas
+    then:
+      properties:
+        clocks:
+          items:
+            - description: XO clock
+            - description: AGGRE2 clock
+        clock-names:
+          items:
+            - const: xo
+            - const: aggre2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs404-cdsp-pas
+    then:
+      properties:
+        clocks:
+          items:
+            - description: XO clock
+            - description: SWAY clock
+            - description: TBU clock
+            - description: BIMC clock
+            - description: AHB AON clock
+            - description: Q6SS SLAVE clock
+            - description: Q6SS MASTER clock
+            - description: Q6 AXIM clock
+        clock-names:
+          items:
+            - const: xo
+            - const: sway
+            - const: tbu
+            - const: bimc
+            - const: ahb_aon
+            - const: q6ss_slave
+            - const: q6ss_master
+            - const: q6_axim
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-mpss-pas
+    then:
+      properties:
+        clocks:
+          items:
+            - description: XO clock
+            - description: IFACE clock
+            - description: BUS clock
+            - description: NAC clock
+            - description: SNOC AXI clock
+            - description: MNOC AXI clock
+        clock-names:
+          items:
+            - const: xo
+            - const: iface
+            - const: bus
+            - const: nav
+            - const: snoc_axi
+            - const: mnoc_axi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-adsp-pil
+              - qcom,msm8974-adsp-pil
+              - qcom,msm8996-adsp-pil
+              - qcom,msm8996-slpi-pil
+              - qcom,msm8998-adsp-pas
+              - qcom,msm8998-slpi-pas
+              - qcom,qcs404-adsp-pas
+              - qcom,qcs404-cdsp-pas
+              - qcom,qcs404-wcss-pas
+              - qcom,sc8180x-adsp-pas
+              - qcom,sc8180x-cdsp-pas
+              - qcom,sc8280xp-adsp-pas
+              - qcom,sc8280xp-nsp0-pas
+              - qcom,sc8280xp-nsp1-pas
+              - qcom,sdm845-adsp-pas
+              - qcom,sdm845-cdsp-pas
+              - qcom,sm6350-adsp-pas
+              - qcom,sm6350-cdsp-pas
+              - qcom,sm8150-adsp-pas
+              - qcom,sm8150-cdsp-pas
+              - qcom,sm8150-slpi-pas
+              - qcom,sm8250-adsp-pas
+              - qcom,sm8250-cdsp-pas
+              - qcom,sm8250-slpi-pas
+              - qcom,sm8350-adsp-pas
+              - qcom,sm8350-cdsp-pas
+              - qcom,sm8350-slpi-pas
+              - qcom,sm8450-adsp-pas
+              - qcom,sm8450-cdsp-pas
+              - qcom,sm8450-slpi-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-mpss-pas
+              - qcom,sc7280-mpss-pas
+              - qcom,sc8180x-mpss-pas
+              - qcom,sdx55-mpss-pas
+              - qcom,sm6350-mpss-pas
+              - qcom,sm8150-mpss-pas
+              - qcom,sm8350-mpss-pas
+              - qcom,sm8450-mpss-pas
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8974-adsp-pil
+    then:
+      required:
+        - cx-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-adsp-pil
+              - qcom,msm8996-adsp-pil
+              - qcom,msm8998-adsp-pas
+              - qcom,sm8150-adsp-pas
+              - qcom,sm8150-cdsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+        power-domain-names:
+          items:
+            - const: cx
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-slpi-pil
+              - qcom,msm8998-slpi-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: SSC-CX power domain
+        power-domain-names:
+          items:
+            - const: ssc_cx
+      required:
+        - px-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-mpss-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MX power domain
+            - description: MSS power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mx
+            - const: mss
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6350-cdsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MX power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mx
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-mpss-pas
+              - qcom,sdx55-mpss-pas
+              - qcom,sm6350-mpss-pas
+              - qcom,sm8150-mpss-pas
+              - qcom,sm8350-mpss-pas
+              - qcom,sm8450-mpss-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MSS power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mss
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-adsp-pas
+              - qcom,sc8180x-cdsp-pas
+              - qcom,sc8280xp-adsp-pas
+              - qcom,sm6350-adsp-pas
+              - qcom,sm8150-slpi-pas
+              - qcom,sm8250-adsp-pas
+              - qcom,sm8250-slpi-pas
+              - qcom,sm8350-adsp-pas
+              - qcom,sm8350-slpi-pas
+              - qcom,sm8450-adsp-pas
+              - qcom,sm8450-slpi-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: LCX power domain
+            - description: LMX power domain
+        power-domain-names:
+          items:
+            - const: lcx
+            - const: lmx
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8350-cdsp-pas
+              - qcom,sm8450-cdsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MXC power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mxc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-nsp0-pas
+              - qcom,sc8280xp-nsp1-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: NSP power domain
+        power-domain-names:
+          items:
+            - const: nsp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs404-cdsp-pas
+    then:
+      properties:
+        resets:
+          items:
+            - description: CDSP restart
+        reset-names:
+          items:
+            - const: restart
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-mpss-pas
+              - qcom,sc7280-mpss-pas
+    then:
+      properties:
+        resets:
+          items:
+            - description: MSS restart
+            - description: PDC reset
+        reset-names:
+          items:
+            - const: mss_restart
+            - const: pdc_reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-adsp-pil
+              - qcom,msm8974-adsp-pil
+              - qcom,msm8996-adsp-pil
+              - qcom,msm8996-slpi-pil
+              - qcom,msm8998-adsp-pas
+              - qcom,msm8998-slpi-pas
+              - qcom,qcs404-adsp-pas
+              - qcom,qcs404-cdsp-pas
+              - qcom,qcs404-wcss-pas
+              - qcom,sdm660-adsp-pas
+              - qcom,sdx55-mpss-pas
+    then:
+      properties:
+        qcom,qmp: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    adsp {
+        compatible = "qcom,msm8974-adsp-pil";
+
+        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+                      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog",
+                  "fatal",
+                  "ready",
+                  "handover",
+                  "stop-ack";
+
+        clocks = <&rpmcc RPM_CXO_CLK>;
+        clock-names = "xo";
+
+        cx-supply = <&pm8841_s2>;
+
+        memory-region = <&adsp_region>;
+
+        qcom,smem-states = <&adsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        smd-edge {
+            interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+            qcom,ipc = <&apcs 8 8>;
+            qcom,smd-edge = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
new file mode 100644
index 000000000000..25c27464ef25
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,glink-edge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm G-Link Edge communication channel nodes
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm G-Link subnode represents communication edge, channels and devices
+  related to the remote processor.
+
+properties:
+  $nodename:
+    const: "glink-edge"
+
+  apr:
+    $ref: /schemas/soc/qcom/qcom,apr.yaml#
+    required:
+      - qcom,glink-channels
+    description:
+      Qualcomm APR/GPR (Asynchronous/Generic Packet Router)
+
+  fastrpc:
+    $ref: /schemas/misc/qcom,fastrpc.yaml#
+    required:
+      - qcom,glink-channels
+    description:
+      Qualcomm FastRPC
+
+  interrupts:
+    maxItems: 1
+
+  label:
+    description: The names of the state bits used for SMP2P output
+
+  mboxes:
+    maxItems: 1
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      ID of the shared memory used by GLINK for communication with remote
+      processor.
+
+required:
+  - interrupts
+  - label
+  - mboxes
+  - qcom,remote-pid
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    remoteproc@8a00000 {
+        reg = <0x08a00000 0x10000>;
+        // ...
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_WPSS
+                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "wpss";
+            qcom,remote-pid = <13>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
deleted file mode 100644
index 1337a3d93d35..000000000000
--- a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
+++ /dev/null
@@ -1,140 +0,0 @@
-Qualcomm Technology Inc. Hexagon v56 Peripheral Image Loader
-
-This document defines the binding for a component that loads and boots firmware
-on the Qualcomm Technology Inc. Hexagon v56 core.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,qcs404-cdsp-pil",
-		    "qcom,sdm845-adsp-pil"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: must specify the base address and size of the qdsp6ss register
-
-- interrupts-extended:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: must list the watchdog, fatal IRQs ready, handover and
-		    stop-ack IRQs
-
-- interrupt-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition:  List of phandles and clock specifier pairs for the Hexagon,
-		     per clock-names below.
-
-- clock-names:
-	Usage: required for SDM845 ADSP
-	Value type: <stringlist>
-	Definition: List of clock input name strings sorted in the same
-		    order as the clocks property. Definition must have
-		    "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr",
-		    "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep"
-		    and "qdsp6ss_core".
-
-- clock-names:
-	Usage: required for QCS404 CDSP
-	Value type: <stringlist>
-	Definition: List of clock input name strings sorted in the same
-		    order as the clocks property. Definition must have
-		    "xo", "sway", "tbu", "bimc", "ahb_aon", "q6ss_slave",
-		    "q6ss_master", "q6_axim".
-
-- power-domains:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to cx power domain node.
-
-- resets:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the list of resets for the Hexagon.
-
-- reset-names:
-        Usage: required for SDM845 ADSP
-        Value type: <stringlist>
-        Definition: must be "pdc_sync" and "cc_lpass"
-
-- reset-names:
-        Usage: required for QCS404 CDSP
-        Value type: <stringlist>
-        Definition: must be "restart"
-
-- qcom,halt-regs:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: a phandle reference to a syscon representing TCSR followed
-		    by the offset within syscon for Hexagon halt register.
-
-- memory-region:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the reserved-memory for the firmware
-
-- qcom,smem-states:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the smem state for requesting the Hexagon to
-		    shut down
-
-- qcom,smem-state-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "stop"
-
-
-= SUBNODES
-The adsp node may have an subnode named "glink-edge" that describes the
-communication edge, channels and devices related to the Hexagon.
-See ../soc/qcom/qcom,glink.txt for details on how to describe these.
-
-= EXAMPLE
-The following example describes the resources needed to boot control the
-ADSP, as it is found on SDM845 boards.
-
-	remoteproc@17300000 {
-		compatible = "qcom,sdm845-adsp-pil";
-		reg = <0x17300000 0x40c>;
-
-		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-			<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-			<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-			<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-			<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "wdog", "fatal", "ready",
-			"handover", "stop-ack";
-
-		clocks = <&rpmhcc RPMH_CXO_CLK>,
-			<&gcc GCC_LPASS_SWAY_CLK>,
-			<&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
-			<&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
-			<&lpasscc LPASS_QDSP6SS_XO_CLK>,
-			<&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
-			<&lpasscc LPASS_QDSP6SS_CORE_CLK>;
-		clock-names = "xo", "sway_cbcr",
-			"lpass_ahbs_aon_cbcr",
-			"lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
-			"qdsp6ss_sleep", "qdsp6ss_core";
-
-		power-domains = <&rpmhpd SDM845_CX>;
-
-		resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
-			 <&aoss_reset AOSS_CC_LPASS_RESTART>;
-		reset-names = "pdc_sync", "cc_lpass";
-
-		qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
-
-		memory-region = <&pil_adsp_mem>;
-
-		qcom,smem-states = <&adsp_smp2p_out 0>;
-		qcom,smem-state-names = "stop";
-	};
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
new file mode 100644
index 000000000000..a7711e3c998c
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm peripheral image loader relocation info binding
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  The Qualcomm peripheral image loader relocation memory region, in IMEM, is
+  used for communicating remoteproc relocation information to post mortem
+  debugging tools.
+
+properties:
+  compatible:
+    const: qcom,pil-reloc-info
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    imem@146bf000 {
+      compatible = "qcom,sdm630-imem", "syscon", "simple-mfd";
+      reg = <0x146bf000 0x1000>;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      ranges = <0 0x146bf000 0x1000>;
+
+      pil-reloc@94c {
+        compatible = "qcom,pil-reloc-info";
+        reg = <0x94c 0xc8>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 88dfa3fc15f7..d0ebd16ee0e1 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -9,11 +9,11 @@ on the Qualcomm Hexagon core.
 	Definition: must be one of:
 		    "qcom,q6v5-pil",
 		    "qcom,ipq8074-wcss-pil"
+		    "qcom,qcs404-wcss-pil"
 		    "qcom,msm8916-mss-pil",
 		    "qcom,msm8974-mss-pil"
 		    "qcom,msm8996-mss-pil"
 		    "qcom,msm8998-mss-pil"
-		    "qcom,sc7180-mss-pil"
 		    "qcom,sdm845-mss-pil"
 
 - reg:
@@ -35,16 +35,16 @@ on the Qualcomm Hexagon core.
 - interrupt-names:
 	Usage: required
 	Value type: <stringlist>
-	Definition: The interrupts needed depends on the the compatible
+	Definition: The interrupts needed depends on the compatible
 		    string:
 	qcom,q6v5-pil:
 	qcom,ipq8074-wcss-pil:
+	qcom,qcs404-wcss-pil:
 	qcom,msm8916-mss-pil:
 	qcom,msm8974-mss-pil:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
-	qcom,sc7180-mss-pil:
 	qcom,sdm845-mss-pil:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
 		    "shutdown-ack"
@@ -67,6 +67,11 @@ on the Qualcomm Hexagon core.
 	Definition: The clocks needed depend on the compatible string:
 	qcom,ipq8074-wcss-pil:
 		    no clock names required
+	qcom,qcs404-wcss-pil:
+		    must be "xo", "gcc_abhs_cbcr", "gcc_abhs_cbcr",
+		    "gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc",
+		    "lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc",
+		    "lcc_axim_cbc", "lcc_bcr_sleep"
 	qcom,q6v5-pil:
 	qcom,msm8916-mss-pil:
 	qcom,msm8974-mss-pil:
@@ -77,9 +82,6 @@ on the Qualcomm Hexagon core.
 	qcom,msm8998-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "qdss"
-	qcom,sc7180-mss-pil:
-		    must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
-		    "mss_crypto", "mss_nav", "nav"
 	qcom,sdm845-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "prng"
@@ -91,7 +93,7 @@ on the Qualcomm Hexagon core.
 		    reference to the list of 3 reset-controllers for the
 		    wcss sub-system
 		    reference to the list of 2 reset-controllers for the modem
-		    sub-system on SC7180, SDM845 SoCs
+		    sub-system on SDM845 SoCs
 
 - reset-names:
 	Usage: required
@@ -100,13 +102,21 @@ on the Qualcomm Hexagon core.
 		    must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
 		    for the wcss sub-system
 		    must be "mss_restart", "pdc_reset" for the modem
-		    sub-system on SC7180, SDM845 SoCs
+		    sub-system on SDM845 SoCs
+
+For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
+should be referenced as follows:
+- memory-region:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the reserved-memory for the mba region followed
+		    by the mpss region
 
 For the compatible strings below the following supplies are required:
   "qcom,q6v5-pil"
   "qcom,msm8916-mss-pil",
-- cx-supply:
-- mx-supply:
+- cx-supply: (deprecated, use power domain instead)
+- mx-supply: (deprecated, use power domain instead)
 - pll-supply:
 	Usage: required
 	Value type: <phandle>
@@ -115,9 +125,9 @@ For the compatible strings below the following supplies are required:
 
 For the compatible string below the following supplies are required:
   "qcom,msm8974-mss-pil"
-- cx-supply:
+- cx-supply: (deprecated, use power domain instead)
 - mss-supply:
-- mx-supply:
+- mx-supply: (deprecated, use power domain instead)
 - pll-supply:
 	Usage: required
 	Value type: <phandle>
@@ -125,6 +135,14 @@ For the compatible string below the following supplies are required:
 		    booting of the Hexagon core
 
 For the compatible string below the following supplies are required:
+  "qcom,qcs404-wcss-pil"
+- cx-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the regulators to be held on behalf of the
+		    booting of the Hexagon core
+
+For the compatible string below the following supplies are required:
   "qcom,msm8996-mss-pil"
 - pll-supply:
 	Usage: required
@@ -141,17 +159,21 @@ For the compatible string below the following supplies are required:
 	Usage: required
 	Value type: <stringlist>
 	Definition: The power-domains needed depend on the compatible string:
-	qcom,q6v5-pil:
 	qcom,ipq8074-wcss-pil:
+		    no power-domain names required
+	qcom,q6v5-pil:
 	qcom,msm8916-mss-pil:
 	qcom,msm8974-mss-pil:
-		    no power-domain names required
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
 		    must be "cx", "mx"
-	qcom,sc7180-mss-pil:
 	qcom,sdm845-mss-pil:
-		    must be "cx", "mx", "mss", "load_state"
+		    must be "cx", "mx", "mss"
+
+- qcom,qmp:
+	Usage: optional
+	Value type: <phandle>
+	Definition: reference to the AOSS side-channel message RAM.
 
 - qcom,smem-states:
 	Usage: required
@@ -171,18 +193,8 @@ For the compatible string below the following supplies are required:
 		    by the three offsets within syscon for q6, modem and nc
 		    halt registers.
 
-For the compatible strings below the following phandle references are required:
-  "qcom,sc7180-mss-pil"
-- qcom,halt-nav-regs:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to a list of 2 phandles with one offset each for
-		    the modem sub-system running on SC7180 SoC. The first
-		    phandle reference is to the mss clock node followed by the
-		    offset within register space for nav halt register. The
-		    second phandle reference is to a syscon representing TCSR
-		    followed by the offset within syscon for conn_box_spare0
-		    register.
+The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
+on platforms which do not have TrustZone.
 
 = SUBNODES:
 The Hexagon node must contain two subnodes, named "mba" and "mpss" representing
@@ -195,36 +207,30 @@ the memory regions used by the Hexagon firmware. Each sub-node must contain:
 
 The Hexagon node may also have an subnode named either "smd-edge" or
 "glink-edge" that describes the communication edge, channels and devices
-related to the Hexagon.  See ../soc/qcom/qcom,smd.txt and
+related to the Hexagon.  See ../soc/qcom/qcom,smd.yaml and
 ../soc/qcom/qcom,glink.txt for details on how to describe these.
 
 = EXAMPLE
 The following example describes the resources needed to boot control the
 Hexagon, as it is found on MSM8974 boards.
 
-	modem-rproc@fc880000 {
-		compatible = "qcom,q6v5-pil";
-		reg = <0xfc880000 0x100>,
-		      <0xfc820000 0x020>;
+	remoteproc@fc880000 {
+		compatible = "qcom,msm8974-mss-pil";
+		reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
 		reg-names = "qdsp6", "rmb";
 
-		interrupts-extended = <&intc 0 24 1>,
-				      <&modem_smp2p_in 0 0>,
-				      <&modem_smp2p_in 1 0>,
-				      <&modem_smp2p_in 2 0>,
-				      <&modem_smp2p_in 3 0>;
-		interrupt-names = "wdog",
-				  "fatal",
-				  "ready",
-				  "handover",
-				  "stop-ack";
+		interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+				      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 
 		clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
 			 <&gcc GCC_MSS_CFG_AHB_CLK>,
-			 <&gcc GCC_BOOT_ROM_AHB_CLK>;
-		clock-names = "iface", "bus", "mem";
-
-		qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+			 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+			 <&xo_board>;
+		clock-names = "iface", "bus", "mem", "xo";
 
 		resets = <&gcc GCC_MSS_RESTART>;
 		reset-names = "mss_restart";
@@ -234,6 +240,8 @@ Hexagon, as it is found on MSM8974 boards.
 		mx-supply = <&pm8841_s1>;
 		pll-supply = <&pm8941_l12>;
 
+		qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
 		qcom,smem-states = <&modem_smp2p_out 0>;
 		qcom,smem-state-names = "stop";
 
@@ -244,4 +252,13 @@ Hexagon, as it is found on MSM8974 boards.
 		mpss {
 			memory-region = <&mpss_region>;
 		};
+
+		smd-edge {
+			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&apcs 8 12>;
+			qcom,smd-edge = <0>;
+
+			label = "modem";
+		};
 	};
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
new file mode 100644
index 000000000000..06f5f93f62a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,qcs404-cdsp-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS404 CDSP Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This document defines the binding for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. CDSP (Compute DSP).
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs404-cdsp-pil
+
+  reg:
+    maxItems: 1
+    description:
+      The base address and size of the qdsp6ss register
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  clocks:
+    items:
+      - description: XO clock
+      - description: SWAY clock
+      - description: TBU clock
+      - description: BIMC clock
+      - description: AHB AON clock
+      - description: Q6SS SLAVE clock
+      - description: Q6SS MASTER clock
+      - description: Q6 AXIM clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sway
+      - const: tbu
+      - const: bimc
+      - const: ahb_aon
+      - const: q6ss_slave
+      - const: q6ss_master
+      - const: q6_axim
+
+  power-domains:
+    items:
+      - description: CX power domain
+
+  resets:
+    items:
+      - description: AOSS restart
+
+  reset-names:
+    items:
+      - const: restart
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Phandle reference to a syscon representing TCSR followed by the
+      three offsets within syscon for q6, modem and nc halt registers.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: stop
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - memory-region
+  - qcom,smem-states
+  - qcom,smem-state-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/clock/qcom,turingcc-qcs404.h>
+    remoteproc@b00000 {
+        compatible = "qcom,qcs404-cdsp-pil";
+        reg = <0x00b00000 0x4040>;
+
+        interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack";
+
+        clocks = <&xo_board>,
+                 <&gcc GCC_CDSP_CFG_AHB_CLK>,
+                 <&gcc GCC_CDSP_TBU_CLK>,
+                 <&gcc GCC_BIMC_CDSP_CLK>,
+                 <&turingcc TURING_WRAPPER_AON_CLK>,
+                 <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
+                 <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
+                 <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
+        clock-names = "xo",
+                      "sway",
+                      "tbu",
+                      "bimc",
+                      "ahb_aon",
+                      "q6ss_slave",
+                      "q6ss_master",
+                      "q6_axim";
+
+        power-domains = <&rpmhpd SDM845_CX>;
+
+        resets = <&gcc GCC_CDSP_RESTART>;
+        reset-names = "restart";
+
+        qcom,halt-regs = <&tcsr 0x19004>;
+
+        memory-region = <&cdsp_fw_mem>;
+
+        qcom,smem-states = <&cdsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
new file mode 100644
index 000000000000..e4a7da8020f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
@@ -0,0 +1,246 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7180-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 MSS Peripheral Image Loader
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  This document describes the hardware for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. SC7180 Modem Hexagon Core.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-mss-pil
+
+  reg:
+    items:
+      - description: MSS QDSP6 registers
+      - description: RMB registers
+
+  reg-names:
+    items:
+      - const: qdsp6
+      - const: rmb
+
+  iommus:
+    items:
+      - description: MSA Stream 1
+      - description: MSA Stream 2
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    items:
+      - description: GCC MSS IFACE clock
+      - description: GCC MSS BUS clock
+      - description: GCC MSS NAV clock
+      - description: GCC MSS SNOC_AXI clock
+      - description: GCC MSS MFAB_AXIS clock
+      - description: RPMH XO clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nav
+      - const: snoc_axi
+      - const: mnoc_axi
+      - const: xo
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+      - description: MSS power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mx
+      - const: mss
+
+  resets:
+    items:
+      - description: AOSS restart
+      - description: PDC reset
+
+  reset-names:
+    items:
+      - const: mss_restart
+      - const: pdc_reset
+
+  memory-region:
+    items:
+      - description: MBA reserved region
+      - description: modem reserved region
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Name of MBA firmware
+      - description: Name of modem firmware
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Halt registers are used to halt transactions of various sub-components
+      within MSS.
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the Q6 halt register
+          - description: offset to the modem halt register
+          - description: offset to the nc halt register
+
+  qcom,spare-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Spare registers are multipurpose registers used for errata
+      handling.
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the conn_box_spare0 register
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    const: stop
+
+  glink-edge:
+    $ref: qcom,glink-edge.yaml#
+    unevaluatedProperties: false
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the DSP.
+
+    properties:
+      interrupts:
+        items:
+          - description: IRQ from MSS to GLINK
+
+      mboxes:
+        items:
+          - description: Mailbox for communication between APPS and MSS
+
+      label:
+        const: modem
+
+      apr: false
+      fastrpc: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - iommus
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - qcom,spare-regs
+  - memory-region
+  - qcom,qmp
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - glink-edge
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+    remoteproc_mpss: remoteproc@4080000 {
+        compatible = "qcom,sc7180-mss-pil";
+        reg = <0x04080000 0x10000>, <0x04180000 0x48>;
+        reg-names = "qdsp6", "rmb";
+
+        iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
+
+        interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+                 <&gcc GCC_MSS_NAV_AXI_CLK>,
+                 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+                 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "bus", "nav", "snoc_axi",
+                      "mnoc_axi", "xo";
+
+        power-domains = <&rpmhpd SC7180_CX>,
+                        <&rpmhpd SC7180_MX>,
+                        <&rpmhpd SC7180_MSS>;
+        power-domain-names = "cx", "mx", "mss";
+
+        memory-region = <&mba_mem>, <&mpss_mem>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&modem_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+                 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+        reset-names = "mss_restart", "pdc_reset";
+
+        qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+        qcom,spare-regs = <&tcsr_regs 0xb3e4>;
+
+        glink-edge {
+            interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&apss_shared 12>;
+            qcom,remote-pid = <1>;
+            label = "modem";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
new file mode 100644
index 000000000000..b4de0521a89d
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 MSS Peripheral Image Loader
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  This document describes the hardware for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. SC7280 Modem Hexagon Core.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-mss-pil
+
+  reg:
+    items:
+      - description: MSS QDSP6 registers
+      - description: RMB registers
+
+  reg-names:
+    items:
+      - const: qdsp6
+      - const: rmb
+
+  iommus:
+    items:
+      - description: MSA Stream 1
+      - description: MSA Stream 2
+
+  interconnects:
+    items:
+      - description: Path leading to system memory
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    items:
+      - description: GCC MSS IFACE clock
+      - description: GCC MSS OFFLINE clock
+      - description: GCC MSS SNOC_AXI clock
+      - description: RPMH PKA clock
+      - description: RPMH XO clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: offline
+      - const: snoc_axi
+      - const: pka
+      - const: xo
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MSS power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mss
+
+  resets:
+    items:
+      - description: AOSS restart
+      - description: PDC reset
+
+  reset-names:
+    items:
+      - const: mss_restart
+      - const: pdc_reset
+
+  memory-region:
+    items:
+      - description: MBA reserved region
+      - description: modem reserved region
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Name of MBA firmware
+      - description: Name of modem firmware
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Halt registers are used to halt transactions of various sub-components
+      within MSS.
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the Q6 halt register
+          - description: offset to the modem halt register
+          - description: offset to the nc halt register
+          - description: offset to the vq6 halt register
+
+  qcom,ext-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: EXT registers are used for various power related functionality
+    items:
+      - items:
+          - description: phandle to TCSR_REG registers
+          - description: offset to the force_clk_en register
+          - description: offset to the rscc_disable register
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the axim1_clk_off register
+          - description: offset to the crypto_clk_off register
+
+  qcom,qaccept-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: QACCEPT registers are used to bring up/down Q-channels
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the mdm qaccept register
+          - description: offset to the cx qaccept register
+          - description: offset to the axi qaccept register
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    const: stop
+
+  glink-edge:
+    $ref: qcom,glink-edge.yaml#
+    unevaluatedProperties: false
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the DSP.
+
+    properties:
+      interrupts:
+        items:
+          - description: IRQ from MSS to GLINK
+
+      mboxes:
+        items:
+          - description: Mailbox for communication between APPS and MSS
+
+      label:
+        const: modem
+
+      apr: false
+      fastrpc: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - iommus
+  - interconnects
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - qcom,ext-regs
+  - qcom,qaccept-regs
+  - memory-region
+  - qcom,qmp
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - glink-edge
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,sc7280.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+    remoteproc_mpss: remoteproc@4080000 {
+        compatible = "qcom,sc7280-mss-pil";
+        reg = <0x04080000 0x10000>, <0x04180000 0x48>;
+        reg-names = "qdsp6", "rmb";
+
+        iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+
+        interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+        interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
+                 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+                 <&rpmhcc RPMH_PKA_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "offline", "snoc_axi", "pka", "xo";
+
+        power-domains = <&rpmhpd SC7280_CX>,
+                        <&rpmhpd SC7280_MSS>;
+        power-domain-names = "cx", "mss";
+
+        memory-region = <&mba_mem>, <&mpss_mem>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&modem_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+                 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+        reset-names = "mss_restart", "pdc_reset";
+
+        qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
+        qcom,ext-regs = <&tcsr 0x10000 0x10004>, <&tcsr_mutex 0x26004 0x26008>;
+        qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>;
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+                                   IPCC_MPROC_SIGNAL_GLINK_QMP
+                                   IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_MPSS
+                      IPCC_MPROC_SIGNAL_GLINK_QMP>;
+            label = "modem";
+            qcom,remote-pid = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
new file mode 100644
index 000000000000..b6bd33438584
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-wpss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 WPSS Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This document defines the binding for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. WPSS.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-wpss-pil
+
+  reg:
+    maxItems: 1
+    description:
+      The base address and size of the qdsp6ss register
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    items:
+      - description: GCC WPSS AHB BDG Master clock
+      - description: GCC WPSS AHB clock
+      - description: GCC WPSS RSCP clock
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: ahb_bdg
+      - const: ahb
+      - const: rscp
+      - const: xo
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mx
+
+  resets:
+    items:
+      - description: AOSS restart
+      - description: PDC SYNC
+
+  reset-names:
+    items:
+      - const: restart
+      - const: pdc_sync
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      The name of the firmware which should be loaded for this remote
+      processor.
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Phandle reference to a syscon representing TCSR followed by the
+      three offsets within syscon for q6, modem and nc halt registers.
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    const: stop
+
+  glink-edge:
+    $ref: qcom,glink-edge.yaml#
+    unevaluatedProperties: false
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the ADSP.
+
+    properties:
+      interrupts:
+        items:
+          - description: IRQ from WPSS to GLINK
+
+      mboxes:
+        items:
+          - description: Mailbox for communication between APPS and WPSS
+
+      label:
+        items:
+          - const: wpss
+
+      apr: false
+      fastrpc: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - memory-region
+  - qcom,qmp
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - glink-edge
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+    remoteproc@8a00000 {
+        compatible = "qcom,sc7280-wpss-pil";
+        reg = <0x08a00000 0x10000>;
+
+        interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+                 <&gcc GCC_WPSS_AHB_CLK>,
+                 <&gcc GCC_WPSS_RSCP_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "ahb_bdg", "ahb",
+                      "rscp", "xo";
+
+        power-domains = <&rpmhpd SC7280_CX>,
+                        <&rpmhpd SC7280_MX>;
+        power-domain-names = "cx", "mx";
+
+        memory-region = <&wpss_mem>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&wpss_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+                 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+        reset-names = "restart", "pdc_sync";
+
+        qcom,halt-regs = <&tcsr_mutex 0x37000>;
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_WPSS
+                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "wpss";
+            qcom,remote-pid = <13>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
new file mode 100644
index 000000000000..20df83a96ef3
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sdm845-adsp-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 ADSP Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This document defines the binding for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. ADSP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdm845-adsp-pil
+
+  reg:
+    maxItems: 1
+    description:
+      The base address and size of the qdsp6ss register
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  clocks:
+    items:
+      - description: XO clock
+      - description: SWAY clock
+      - description: LPASS AHBS AON clock
+      - description: LPASS AHBM AON clock
+      - description: QDSP XO clock
+      - description: Q6SP6SS SLEEP clock
+      - description: Q6SP6SS CORE clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sway_cbcr
+      - const: lpass_ahbs_aon_cbcr
+      - const: lpass_ahbm_aon_cbcr
+      - const: qdsp6ss_xo
+      - const: qdsp6ss_sleep
+      - const: qdsp6ss_core
+
+  power-domains:
+    items:
+      - description: CX power domain
+
+  resets:
+    items:
+      - description: PDC AUDIO SYNC RESET
+      - description: CC LPASS restart
+
+  reset-names:
+    items:
+      - const: pdc_sync
+      - const: cc_lpass
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Phandle reference to a syscon representing TCSR followed by the
+      three offsets within syscon for q6, modem and nc halt registers.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: stop
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - memory-region
+  - qcom,smem-states
+  - qcom,smem-state-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,lpass-sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    remoteproc@17300000 {
+        compatible = "qcom,sdm845-adsp-pil";
+        reg = <0x17300000 0x40c>;
+
+        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                "handover", "stop-ack";
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>,
+                 <&gcc GCC_LPASS_SWAY_CLK>,
+                 <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
+                 <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
+                 <&lpasscc LPASS_QDSP6SS_XO_CLK>,
+                 <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
+                 <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
+        clock-names = "xo", "sway_cbcr",
+                "lpass_ahbs_aon_cbcr",
+                "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
+                "qdsp6ss_sleep", "qdsp6ss_core";
+
+        power-domains = <&rpmhpd SDM845_CX>;
+
+        resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
+                 <&aoss_reset AOSS_CC_LPASS_RESTART>;
+        reset-names = "pdc_sync", "cc_lpass";
+
+        qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
+
+        memory-region = <&pil_adsp_mem>;
+
+        qcom,smem-states = <&adsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
new file mode 100644
index 000000000000..7ec8a6b6682c
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,smd-edge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SMD Edge communication channel nodes
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm SMD subnode represents a remote subsystem or a remote processor of
+  some sort - or in SMD language an "edge". The name of the edges are not
+  important.
+
+  In turn, subnodes of the "edges" represent devices tied to SMD channels on
+  that "edge". The names of the devices are not important. The properties of
+  these nodes are defined by the individual bindings for the SMD devices.
+  See also Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
+
+properties:
+  $nodename:
+    const: "smd-edge"
+
+  apr:
+    $ref: /schemas/soc/qcom/qcom,apr.yaml#
+    required:
+      - qcom,smd-channels
+    description:
+      Qualcomm APR/GPR (Asynchronous/Generic Packet Router)
+
+  fastrpc:
+    $ref: /schemas/misc/qcom,fastrpc.yaml#
+    required:
+      - qcom,smd-channels
+    description:
+      Qualcomm FastRPC
+
+  interrupts:
+    maxItems: 1
+
+  label:
+    description:
+      Name of the edge, used for debugging and identification purposes. The
+      node name will be used if this is not present.
+
+  mboxes:
+    maxItems: 1
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client.
+
+  qcom,ipc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the
+      remote processor.
+
+  qcom,smd-edge:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier of the remote processor in the smd channel allocation
+      table.
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier for the remote processor as known by the rest of the
+      system.
+
+  rpm-requests:
+    $ref: /schemas/soc/qcom/qcom,smd-rpm.yaml#
+    required:
+      - qcom,smd-channels
+    description:
+      Qualcomm Resource Power Manager (RPM) over SMD.
+
+  wcnss:
+    $ref: /schemas/soc/qcom/qcom,wcnss.yaml
+    required:
+      - qcom,smd-channels
+    description:
+      Qualcomm WCNSS for Bluetooth, WiFi and FM radio.
+
+required:
+  - interrupts
+  - qcom,smd-edge
+
+oneOf:
+  - required:
+      - mboxes
+  - required:
+      - qcom,ipc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    remoteproc {
+        // ...
+
+        smd-edge {
+            interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+            qcom,ipc = <&apcs 8 8>;
+            qcom,smd-edge = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
index d420f84ddfb0..ac423f4c3f1b 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
@@ -34,14 +34,31 @@ on the Qualcomm WCNSS core.
 	Definition: should be "wdog", "fatal", optionally followed by "ready",
 		    "handover", "stop-ack"
 
-- vddmx-supply:
-- vddcx-supply:
+- firmware-name:
+	Usage: optional
+	Value type: <string>
+	Definition: must list the relative firmware image path for the
+		    WCNSS core. Defaults to "wcnss.mdt".
+
+- vddmx-supply: (deprecated for qcom,pronto-v1/2-pil)
+- vddcx-supply: (deprecated for qcom,pronto-v1/2-pil)
 - vddpx-supply:
 	Usage: required
 	Value type: <phandle>
 	Definition: reference to the regulators to be held on behalf of the
 		    booting of the WCNSS core
 
+- power-domains:
+	Usage: required (for qcom,pronto-v1/2-pil)
+	Value type: <phandle>
+	Definition: reference to the power domains to be held on behalf of the
+		    booting of the WCNSS core
+
+- power-domain-names:
+	Usage: required (for qcom,pronto-v1/2-pil)
+	Value type: <stringlist>
+	Definition: must be "cx", "mx"
+
 - qcom,smem-states:
 	Usage: optional
 	Value type: <prop-encoded-array>
@@ -69,6 +86,7 @@ and its resource dependencies. It is described by the following properties:
 	Definition: must be one of:
 		    "qcom,wcn3620",
 		    "qcom,wcn3660",
+		    "qcom,wcn3660b",
 		    "qcom,wcn3680"
 
 - clocks:
@@ -93,7 +111,7 @@ and its resource dependencies. It is described by the following properties:
 
 The wcnss node can also have an subnode named "smd-edge" that describes the SMD
 edge, channels and devices related to the WCNSS.
-See ../soc/qcom/qcom,smd.txt for details on how to describe the SMD edge.
+See ../soc/qcom/qcom,smd.yaml for details on how to describe the SMD edge.
 
 = EXAMPLE
 The following example describes the resources needed to boot control the WCNSS,
@@ -111,8 +129,9 @@ pronto@fb204000 {
 			      <&wcnss_smp2p_slave 3 0>;
 	interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 
-	vddmx-supply = <&pm8841_s1>;
-	vddcx-supply = <&pm8841_s2>;
+	power-domains = <&rpmpd MSM8974_VDDCX>, <&rpmpd MSM8974_VDDMX>;
+	power-domain-names = "cx", "mx";
+
 	vddpx-supply = <&pm8941_s3>;
 
 	qcom,smem-states = <&wcnss_smp2p_out 0>;
diff --git a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
new file mode 100644
index 000000000000..a7d25fa920e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas R-Car remote processor controller bindings
+
+maintainers:
+  - Julien Massot <julien.massot@iot.bzh>
+
+description: |
+  This document defines the bindings for the remoteproc component that loads and
+  boots firmwares on the Renesas R-Car family chipset.
+  R-Car gen3 family may have a realtime processor, this processor shares peripheral
+  and RAM with the host processor with the same address map.
+
+properties:
+  compatible:
+    const: renesas,rcar-cr7
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  memory-region:
+    description:
+      List of phandles to the reserved memory regions associated with the
+      remoteproc device. This is variable and describes the memories shared with
+      the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
+      vrings, ...).
+      (see ../reserved-memory/reserved-memory.yaml)
+
+required:
+  - compatible
+  - resets
+  - memory-region
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cr7_ram: cr7_ram@40040000 {
+            no-map;
+            reg = <0x0 0x40040000 0x0 0x1fc0000>;
+        };
+    };
+
+    cr7_rproc: cr7 {
+        compatible = "renesas,rcar-cr7";
+        memory-region = <&cr7_ram>;
+        power-domains = <&sysc R8A7795_PD_CR7>;
+        resets = <&cpg 222>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index c0d83865e933..da50f0e99fe2 100644
--- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -11,8 +11,8 @@ description:
   boots firmwares on the ST32MP family chipset.
 
 maintainers:
-  - Fabien Dessenne <fabien.dessenne@st.com>
-  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
 
 properties:
   compatible:
@@ -25,26 +25,26 @@ properties:
     maxItems: 3
 
   resets:
-     maxItems: 1
+    maxItems: 1
 
   st,syscfg-holdboot:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: remote processor reset hold boot
-      - Phandle of syscon block.
-      - The offset of the hold boot setting register.
-      - The field mask of the hold boot.
-    maxItems: 1
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: Phandle of syscon block
+          - description: The offset of the hold boot setting register
+          - description: The field mask of the hold boot
 
   st,syscfg-tz:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description:
       Reference to the system configuration which holds the RCC trust zone mode
-      - Phandle of syscon block.
-      - The offset of the RCC trust zone mode register.
-      - The field mask of the RCC trust zone mode.
-    maxItems: 1
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: Phandle of syscon block
+          - description: The offset of the trust zone setting register
+          - description: The field mask of the trust zone state
 
   interrupts:
     description: Should contain the WWDG1 watchdog reset interrupt
@@ -70,16 +70,21 @@ properties:
           Unidirectional channel:
             - from local to remote, where ACK from the remote means that it is
               ready for shutdown
+      - description: |
+          A channel (d) used by the local proc to notify the remote proc that it
+          has to stop interprocessor communnication.
+          Unidirectional channel:
+            - from local to remote, where ACK from the remote means that communnication
+              as been stopped on the remote side.
     minItems: 1
-    maxItems: 3
 
   mbox-names:
     items:
       - const: vq0
       - const: vq1
       - const: shutdown
+      - const: detach
     minItems: 1
-    maxItems: 3
 
   memory-region:
     description:
@@ -90,14 +95,35 @@ properties:
       (see ../reserved-memory/reserved-memory.txt)
 
   st,syscfg-pdds:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: |
       Reference to the system configuration which holds the remote
-        1st cell: phandle to syscon block
-        2nd cell: register offset containing the deep sleep setting
-        3rd cell: register bitmask for the deep sleep bit
-    maxItems: 1
+    items:
+      - items:
+          - description: Phandle of syscon block
+          - description: The offset of the power setting register
+          - description: The field mask of the PDDS selection
+
+  st,syscfg-m4-state:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    description: |
+      Reference to the tamp register which exposes the Cortex-M4 state.
+    items:
+      - items:
+          - description: Phandle of syscon block with the tamp register
+          - description: The offset of the tamp register
+          - description: The field mask of the Cortex-M4 state
+
+  st,syscfg-rsc-tbl:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    description: |
+      Reference to the tamp register which references the Cortex-M4
+      resource table address.
+    items:
+      - items:
+          - description: Phandle of syscon block with the tamp register
+          - description: The offset of the tamp register
+          - description: The field mask of the Cortex-M4 resource table address
 
   st,auto-boot:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -125,6 +151,8 @@ examples:
       resets = <&rcc MCU_R>;
       st,syscfg-holdboot = <&rcc 0x10C 0x1>;
       st,syscfg-tz = <&rcc 0x000 0x1>;
+      st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
+      st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
new file mode 100644
index 000000000000..cedbc5efdc56
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,k3-dsp-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI K3 DSP devices
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  The TI K3 family of SoCs usually have one or more TI DSP Core sub-systems
+  that are used to offload some of the processor-intensive tasks or algorithms,
+  for achieving various system level goals.
+
+  These processor sub-systems usually contain additional sub-modules like
+  L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory
+  controller, a dedicated local power/sleep controller etc. The DSP processor
+  cores in the K3 SoCs are usually either a TMS320C66x CorePac processor or a
+  TMS320C71x CorePac processor.
+
+  Each DSP Core sub-system is represented as a single DT node. Each node has a
+  number of required or optional properties that enable the OS running on the
+  host processor (Arm CorePac) to perform the device management of the remote
+  processor and to communicate with the remote processor.
+
+allOf:
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-c66-dsp
+      - ti,j721e-c71-dsp
+      - ti,j721s2-c71-dsp
+    description:
+      Use "ti,j721e-c66-dsp" for C66x DSPs on K3 J721E SoCs
+      Use "ti,j721e-c71-dsp" for C71x DSPs on K3 J721E SoCs
+      Use "ti,j721s2-c71-dsp" for C71x DSPs on K3 J721S2 SoCs
+
+  resets:
+    description: |
+      Should contain the phandle to the reset controller node managing the
+      local resets for this device, and a reset specifier.
+    maxItems: 1
+
+  firmware-name:
+    description: |
+      Should contain the name of the default firmware image
+      file located on the firmware search path
+
+  mboxes:
+    description: |
+      OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+      communication with the remote processor. This property should match
+      with the sub-mailbox node used in the firmware image.
+    maxItems: 1
+
+  memory-region:
+    minItems: 2
+    maxItems: 8
+    description: |
+      phandle to the reserved memory nodes to be associated with the remoteproc
+      device. There should be at least two reserved memory nodes defined. The
+      reserved memory nodes should be carveout nodes, and should be defined as
+      per the bindings in
+      Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+    items:
+      - description: region used for dynamic DMA allocations like vrings and
+                     vring buffers
+      - description: region reserved for firmware image sections
+    additionalItems: true
+
+# Optional properties:
+# --------------------
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 4
+    items:
+      maxItems: 1
+    description: |
+      phandles to one or more reserved on-chip SRAM regions. The regions
+      should be defined as child nodes of the respective SRAM node, and
+      should be defined as per the generic bindings in,
+      Documentation/devicetree/bindings/sram/sram.yaml
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,j721e-c66-dsp
+then:
+  properties:
+    reg:
+      items:
+        - description: Address and Size of the L2 SRAM internal memory region
+        - description: Address and Size of the L1 PRAM internal memory region
+        - description: Address and Size of the L1 DRAM internal memory region
+    reg-names:
+      items:
+        - const: l2sram
+        - const: l1pram
+        - const: l1dram
+else:
+  if:
+    properties:
+      compatible:
+        enum:
+          - ti,j721e-c71-dsp
+          - ti,j721s2-c71-dsp
+  then:
+    properties:
+      reg:
+        items:
+          - description: Address and Size of the L2 SRAM internal memory region
+          - description: Address and Size of the L1 DRAM internal memory region
+      reg-names:
+        items:
+          - const: l2sram
+          - const: l1dram
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,sci-proc-ids
+  - resets
+  - firmware-name
+  - mboxes
+  - memory-region
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mailbox0_cluster3: mailbox-0 {
+            #mbox-cells = <1>;
+        };
+
+        mailbox0_cluster4: mailbox-1 {
+            #mbox-cells = <1>;
+        };
+
+        bus@100000 {
+            compatible = "simple-bus";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+                     <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71_0 */
+                     <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
+                     <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>; /* C66_1 */
+
+            /* J721E C66_0 DSP node */
+            dsp@4d80800000 {
+                compatible = "ti,j721e-c66-dsp";
+                reg = <0x4d 0x80800000 0x00 0x00048000>,
+                      <0x4d 0x80e00000 0x00 0x00008000>,
+                      <0x4d 0x80f00000 0x00 0x00008000>;
+                reg-names = "l2sram", "l1pram", "l1dram";
+                ti,sci = <&dmsc>;
+                ti,sci-dev-id = <142>;
+                ti,sci-proc-ids = <0x03 0xFF>;
+                resets = <&k3_reset 142 1>;
+                firmware-name = "j7-c66_0-fw";
+                memory-region = <&c66_0_dma_memory_region>,
+                                <&c66_0_memory_region>;
+                mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
+            };
+
+            /* J721E C71_0 DSP node */
+            c71_0: dsp@64800000 {
+                compatible = "ti,j721e-c71-dsp";
+                reg = <0x00 0x64800000 0x00 0x00080000>,
+                      <0x00 0x64e00000 0x00 0x0000c000>;
+                reg-names = "l2sram", "l1dram";
+                ti,sci = <&dmsc>;
+                ti,sci-dev-id = <15>;
+                ti,sci-proc-ids = <0x30 0xFF>;
+                resets = <&k3_reset 15 1>;
+                firmware-name = "j7-c71_0-fw";
+                memory-region = <&c71_0_dma_memory_region>,
+                                <&c71_0_memory_region>;
+                mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
new file mode 100644
index 000000000000..fb9605f0655b
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -0,0 +1,313 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,k3-r5f-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI K3 R5F processor subsystems
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  The TI K3 family of SoCs usually have one or more dual-core Arm Cortex R5F
+  processor subsystems/clusters (R5FSS). The dual core cluster can be used
+  either in a LockStep mode providing safety/fault tolerance features or in a
+  Split mode providing two individual compute cores for doubling the compute
+  capacity on most SoCs. These are used together with other processors present
+  on the SoC to achieve various system level goals.
+
+  AM64x SoCs do not support LockStep mode, but rather a new non-safety mode
+  called "Single-CPU" mode, where only Core0 is used, but with ability to use
+  Core1's TCMs as well.
+
+  Each Dual-Core R5F sub-system is represented as a single DTS node
+  representing the cluster, with a pair of child DT nodes representing
+  the individual R5F cores. Each node has a number of required or optional
+  properties that enable the OS running on the host processor to perform
+  the device management of the remote processor and to communicate with the
+  remote processor.
+
+properties:
+  $nodename:
+    pattern: "^r5fss(@.*)?"
+
+  compatible:
+    enum:
+      - ti,am654-r5fss
+      - ti,j721e-r5fss
+      - ti,j7200-r5fss
+      - ti,am64-r5fss
+      - ti,j721s2-r5fss
+
+  power-domains:
+    description: |
+      Should contain a phandle to a PM domain provider node and an args
+      specifier containing the R5FSS device id value.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description: |
+      Standard ranges definition providing address translations for
+      local R5F TCM address spaces to bus addresses.
+
+# Optional properties:
+# --------------------
+
+  ti,cluster-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configuration Mode for the Dual R5F cores within the R5F cluster.
+      Should be either a value of 1 (LockStep mode) or 0 (Split mode) on
+      most SoCs (AM65x, J721E, J7200, J721s2), default is LockStep mode if
+      omitted; and should be either a value of 0 (Split mode) or 2
+      (Single-CPU mode) on AM64x SoCs, default is Split mode if omitted.
+
+# R5F Processor Child Nodes:
+# ==========================
+
+patternProperties:
+  "^r5f@[a-f0-9]+$":
+    type: object
+    description: |
+      The R5F Sub-System device node should define two R5F child nodes, each
+      node representing a TI instantiation of the Arm Cortex R5F core. There
+      are some specific integration differences for the IP like the usage of
+      a Region Address Translator (RAT) for translating the larger SoC bus
+      addresses into a 32-bit address space for the processor.
+
+      Each R5F core has an associated 64 KB of Tightly-Coupled Memory (TCM)
+      internal memories split between two banks - TCMA and TCMB (further
+      interleaved into two banks TCMB0 and TCMB1). These memories (also called
+      ATCM and BTCM) provide read/write performance on par with the core's L1
+      caches. Each of the TCMs can be enabled or disabled independently and
+      either of them can be configured to appear at that R5F's address 0x0.
+
+      The cores do not use an MMU, but has a Region Address Translater
+      (RAT) module that is accessible only from the R5Fs for providing
+      translations between 32-bit CPU addresses into larger system bus
+      addresses. Cache and memory access settings are provided through a
+      Memory Protection Unit (MPU), programmable only from the R5Fs.
+
+    $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - ti,am654-r5f
+          - ti,j721e-r5f
+          - ti,j7200-r5f
+          - ti,am64-r5f
+          - ti,j721s2-r5f
+
+      reg:
+        items:
+          - description: Address and Size of the ATCM internal memory region
+          - description: Address and Size of the BTCM internal memory region
+
+      reg-names:
+        items:
+          - const: atcm
+          - const: btcm
+
+      resets:
+        description: |
+          Should contain the phandle to the reset controller node managing the
+          local resets for this device, and a reset specifier.
+        maxItems: 1
+
+      firmware-name:
+        description: |
+          Should contain the name of the default firmware image
+          file located on the firmware search path
+
+# The following properties are mandatory for R5F Core0 in both LockStep and Split
+# modes, and are mandatory for R5F Core1 _only_ in Split mode. They are unused for
+# R5F Core1 in LockStep mode:
+
+      mboxes:
+        description: |
+          OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+          communication with the remote processor. This property should match
+          with the sub-mailbox node used in the firmware image.
+        maxItems: 1
+
+      memory-region:
+        description: |
+          phandle to the reserved memory nodes to be associated with the
+          remoteproc device. There should be at least two reserved memory nodes
+          defined. The reserved memory nodes should be carveout nodes, and
+          should be defined with a "no-map" property as per the bindings in
+          Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+        minItems: 2
+        maxItems: 8
+        items:
+          - description: region used for dynamic DMA allocations like vrings and
+                         vring buffers
+          - description: region reserved for firmware image sections
+        additionalItems: true
+
+
+# Optional properties:
+# --------------------
+# The following properties are optional properties for each of the R5F cores:
+
+      ti,atcm-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          R5F core configuration mode dictating if ATCM should be enabled. The
+          R5F address of ATCM is dictated by ti,loczrama property. Should be
+          either a value of 1 (enabled) or 0 (disabled), default is disabled
+          if omitted. Recommended to enable it for maximizing TCMs.
+
+      ti,btcm-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          R5F core configuration mode dictating if BTCM should be enabled. The
+          R5F address of BTCM is dictated by ti,loczrama property. Should be
+          either a value of 1 (enabled) or 0 (disabled), default is enabled if
+          omitted.
+
+      ti,loczrama:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          R5F core configuration mode dictating which TCM should appear at
+          address 0 (from core's view). Should be either a value of 1 (ATCM
+          at 0x0) or 0 (BTCM at 0x0), default value is 1 if omitted.
+
+      sram:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        minItems: 1
+        maxItems: 4
+        items:
+          maxItems: 1
+        description: |
+          phandles to one or more reserved on-chip SRAM regions. The regions
+          should be defined as child nodes of the respective SRAM node, and
+          should be defined as per the generic bindings in,
+          Documentation/devicetree/bindings/sram/sram.yaml
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - ti,sci
+      - ti,sci-dev-id
+      - ti,sci-proc-ids
+      - resets
+      - firmware-name
+
+    unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,am64-r5fss
+then:
+  properties:
+    ti,cluster-mode:
+      enum: [0, 2]
+else:
+  properties:
+    ti,cluster-mode:
+      enum: [0, 1]
+
+required:
+  - compatible
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mailbox0: mailbox-0 {
+            #mbox-cells = <1>;
+        };
+
+        mailbox1: mailbox-1 {
+            #mbox-cells = <1>;
+        };
+
+        bus@100000 {
+            compatible = "simple-bus";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+                     <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+                     <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+                     <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>;
+
+            bus@28380000 {
+                compatible = "simple-bus";
+                #address-cells = <2>;
+                #size-cells = <2>;
+                ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS */
+                         <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+                         <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+                         <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>; /* MCU SRAM */
+
+                /* AM65x MCU R5FSS node */
+                mcu_r5fss0: r5fss@41000000 {
+                    compatible = "ti,am654-r5fss";
+                    power-domains = <&k3_pds 129>;
+                    ti,cluster-mode = <1>;
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+                    ranges = <0x41000000 0x00 0x41000000 0x20000>,
+                             <0x41400000 0x00 0x41400000 0x20000>;
+
+                    mcu_r5f0: r5f@41000000 {
+                        compatible = "ti,am654-r5f";
+                        reg = <0x41000000 0x00008000>,
+                              <0x41010000 0x00008000>;
+                        reg-names = "atcm", "btcm";
+                        ti,sci = <&dmsc>;
+                        ti,sci-dev-id = <159>;
+                        ti,sci-proc-ids = <0x01 0xFF>;
+                        resets = <&k3_reset 159 1>;
+                        firmware-name = "am65x-mcu-r5f0_0-fw";
+                        ti,atcm-enable = <1>;
+                        ti,btcm-enable = <1>;
+                        ti,loczrama = <1>;
+                        mboxes = <&mailbox0 &mbox_mcu_r5fss0_core0>;
+                        memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+                                        <&mcu_r5fss0_core0_memory_region>;
+                        sram = <&mcu_r5fss0_core0_sram>;
+                    };
+
+                    mcu_r5f1: r5f@41400000 {
+                        compatible = "ti,am654-r5f";
+                        reg = <0x41400000 0x00008000>,
+                              <0x41410000 0x00008000>;
+                        reg-names = "atcm", "btcm";
+                        ti,sci = <&dmsc>;
+                        ti,sci-dev-id = <245>;
+                        ti,sci-proc-ids = <0x02 0xFF>;
+                        resets = <&k3_reset 245 1>;
+                        firmware-name = "am65x-mcu-r5f0_1-fw";
+                        ti,atcm-enable = <1>;
+                        ti,btcm-enable = <1>;
+                        ti,loczrama = <1>;
+                        mboxes = <&mailbox1 &mbox_mcu_r5fss0_core1>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
index 461dc1d8d570..463a97c11eff 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
+++ b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
@@ -48,7 +48,7 @@ The following are the mandatory properties:
 			bindings for the reset argument specifier as per SoC,
 			Documentation/devicetree/bindings/reset/ti-syscon-reset.txt
 			    for 66AK2HK/66AK2L/66AK2E SoCs or,
-			Documentation/devicetree/bindings/reset/ti,sci-reset.txt
+			Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
 			    for 66AK2G SoCs
 
 - interrupts: 		Should contain an entry for each value in 'interrupt-names'.
@@ -82,7 +82,7 @@ The following are mandatory properties for Keystone 2 66AK2G SoCs only:
 - power-domains:	Should contain a phandle to a PM domain provider node
 			and an args specifier containing the DSP device id
 			value. This property is as per the binding,
-			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
 
 Optional properties:
 --------------------
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
new file mode 100644
index 000000000000..1fdc2741c36e
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
@@ -0,0 +1,331 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,omap-remoteproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP4+ Remoteproc Devices
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description:
+  The OMAP family of SoCs usually have one or more slave processor sub-systems
+  that are used to offload some of the processor-intensive tasks, or to manage
+  other hardware accelerators, for achieving various system level goals.
+
+  The processor cores in the sub-system are usually behind an IOMMU, and may
+  contain additional sub-modules like Internal RAM and/or ROMs, L1 and/or L2
+  caches, an Interrupt Controller, a Cache Controller etc.
+
+  The OMAP SoCs usually have a DSP processor sub-system and/or an IPU processor
+  sub-system. The DSP processor sub-system can contain any of the TI's C64x,
+  C66x or C67x family of DSP cores as the main execution unit. The IPU processor
+  sub-system usually contains either a Dual-Core Cortex-M3 or Dual-Core
+  Cortex-M4 processors.
+
+  Each remote processor sub-system is represented as a single DT node. Each node
+  has a number of required or optional properties that enable the OS running on
+  the host processor (MPU) to perform the device management of the remote
+  processor and to communicate with the remote processor. The various properties
+  can be classified as constant or variable. The constant properties are
+  dictated by the SoC and does not change from one board to another having the
+  same SoC. Examples of constant properties include 'iommus', 'reg'. The
+  variable properties are dictated by the system integration aspects such as
+  memory on the board, or configuration used within the corresponding firmware
+  image. Examples of variable properties include 'mboxes', 'memory-region',
+  'timers', 'watchdog-timers' etc.
+
+properties:
+  compatible:
+    enum:
+      - ti,omap4-dsp
+      - ti,omap5-dsp
+      - ti,dra7-dsp
+      - ti,omap4-ipu
+      - ti,omap5-ipu
+      - ti,dra7-ipu
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+    description: |
+      phandles to OMAP IOMMU nodes, that need to be programmed
+      for this remote processor to access any external RAM memory or
+      other peripheral device address spaces. This property usually
+      has only a single phandle. Multiple phandles are used only in
+      cases where the sub-system has different ports for different
+      sub-modules within the processor sub-system (eg: DRA7 DSPs),
+      and need the same programming in both the MMUs.
+
+  mboxes:
+    minItems: 1
+    maxItems: 2
+    description: |
+      OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+      communication with the remote processor. The specifier format is
+      as per the bindings,
+      Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
+      This property should match with the sub-mailbox node used in
+      the firmware image.
+
+  clocks:
+    maxItems: 1
+    description: |
+      Main functional clock for the remote processor
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Reset handles for the remote processor
+
+  firmware-name:
+    description: |
+      Default name of the firmware to load to the remote processor.
+
+# Optional properties:
+# --------------------
+# Some of these properties are mandatory on some SoCs, and some are optional
+# depending on the configuration of the firmware image to be executed on the
+# remote processor. The conditions are mentioned for each property.
+#
+# The following are the optional properties:
+
+  memory-region:
+    maxItems: 1
+    description: |
+      phandle to the reserved memory node to be associated
+      with the remoteproc device. The reserved memory node
+      can be a CMA memory node, and should be defined as
+      per the bindings,
+      Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+
+  reg:
+    description: |
+      Address space for any remoteproc memories present on
+      the SoC. Should contain an entry for each value in
+      'reg-names'. These are mandatory for all DSP and IPU
+      processors that have them (OMAP4/OMAP5 DSPs do not have
+      any RAMs)
+
+  reg-names:
+    description: |
+      Required names for each of the address spaces defined in
+      the 'reg' property. Expects the names from the following
+      list, in the specified order, each representing the corresponding
+      internal RAM memory region.
+    minItems: 1
+    items:
+      - const: l2ram
+      - const: l1pram
+      - const: l1dram
+
+  ti,bootreg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the System Control Configuration region
+          - description: register offset of the boot address register
+          - description: the bit shift within the register
+    description:
+      This property is required for all the DSP instances on OMAP4, OMAP5
+      and DRA7xx SoCs.
+
+  ti,autosuspend-delay-ms:
+    description: |
+      Custom autosuspend delay for the remoteproc in milliseconds.
+      Recommended values is preferable to be in the order of couple
+      of seconds. A negative value can also be used to disable the
+      autosuspend behavior.
+
+  ti,timers:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description: |
+      One or more phandles to OMAP DMTimer nodes, that serve
+      as System/Tick timers for the OS running on the remote
+      processors. This will usually be a single timer if the
+      processor sub-system is running in SMP mode, or one per
+      core in the processor sub-system. This can also be used
+      to reserve specific timers to be dedicated to the
+      remote processors.
+
+      This property is mandatory on remote processors requiring
+      external tick wakeup, and to support Power Management
+      features. The timers to be used should match with the
+      timers used in the firmware image.
+
+  ti,watchdog-timers:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description: |
+      One or more phandles to OMAP DMTimer nodes, used to
+      serve as Watchdog timers for the processor cores. This
+      will usually be one per executing processor core, even
+      if the processor sub-system is running a SMP OS.
+
+      The timers to be used should match with the watchdog
+      timers used in the firmware image.
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,dra7-dsp
+then:
+  properties:
+    reg:
+      minItems: 3
+      maxItems: 3
+  required:
+    - reg
+    - reg-names
+    - ti,bootreg
+
+else:
+  if:
+    properties:
+      compatible:
+        enum:
+          - ti,omap4-ipu
+          - ti,omap5-ipu
+          - ti,dra7-ipu
+  then:
+    properties:
+      reg:
+        minItems: 1
+        maxItems: 1
+      ti,bootreg: false
+    required:
+      - reg
+      - reg-names
+
+  else:
+    properties:
+      reg: false
+    required:
+      - ti,bootreg
+
+required:
+  - compatible
+  - iommus
+  - mboxes
+  - clocks
+  - resets
+  - firmware-name
+
+additionalProperties: false
+
+examples:
+  - |
+
+    //Example 1: OMAP4 DSP
+
+    /* DSP Reserved Memory node */
+    #include <dt-bindings/clock/omap4.h>
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        dsp_memory_region: dsp-memory@98000000 {
+            compatible = "shared-dma-pool";
+            reg = <0x98000000 0x800000>;
+            reusable;
+        };
+    };
+
+    /* DSP node */
+    ocp {
+        dsp: dsp {
+            compatible = "ti,omap4-dsp";
+            ti,bootreg = <&scm_conf 0x304 0>;
+            iommus = <&mmu_dsp>;
+            mboxes = <&mailbox &mbox_dsp>;
+            memory-region = <&dsp_memory_region>;
+            ti,timers = <&timer5>;
+            ti,watchdog-timers = <&timer6>;
+            clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
+            resets = <&prm_tesla 0>, <&prm_tesla 1>;
+            firmware-name = "omap4-dsp-fw.xe64T";
+        };
+    };
+
+  - |+
+
+    //Example 2: OMAP5 IPU
+
+    /* IPU Reserved Memory node */
+    #include <dt-bindings/clock/omap5.h>
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ipu_memory_region: ipu-memory@95800000 {
+            compatible = "shared-dma-pool";
+            reg = <0 0x95800000 0 0x3800000>;
+            reusable;
+        };
+    };
+
+    /* IPU node */
+    ocp {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ipu: ipu@55020000 {
+            compatible = "ti,omap5-ipu";
+            reg = <0x55020000 0x10000>;
+            reg-names = "l2ram";
+            iommus = <&mmu_ipu>;
+            mboxes = <&mailbox &mbox_ipu>;
+            memory-region = <&ipu_memory_region>;
+            ti,timers = <&timer3>, <&timer4>;
+            ti,watchdog-timers = <&timer9>, <&timer11>;
+            clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+            resets = <&prm_core 2>;
+            firmware-name = "omap5-ipu-fw.xem4";
+        };
+    };
+
+  - |+
+
+    //Example 3: DRA7xx/AM57xx DSP
+
+    /* DSP1 Reserved Memory node */
+    #include <dt-bindings/clock/dra7.h>
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsp1_memory_region: dsp1-memory@99000000 {
+            compatible = "shared-dma-pool";
+            reg = <0x0 0x99000000 0x0 0x4000000>;
+            reusable;
+        };
+    };
+
+    /* DSP1 node */
+    ocp {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        dsp1: dsp@40800000 {
+            compatible = "ti,dra7-dsp";
+            reg = <0x40800000 0x48000>,
+                  <0x40e00000 0x8000>,
+                  <0x40f00000 0x8000>;
+            reg-names = "l2ram", "l1pram", "l1dram";
+            ti,bootreg = <&scm_conf 0x55c 0>;
+            iommus = <&mmu0_dsp1>, <&mmu1_dsp1>;
+            mboxes = <&mailbox5 &mbox_dsp1_ipc3x>;
+            memory-region = <&dsp1_memory_region>;
+            ti,timers = <&timer5>;
+            ti,watchdog-timers = <&timer10>;
+            resets = <&prm_dsp1 0>;
+            clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+            firmware-name = "dra7-dsp1-fw.xe66";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
new file mode 100644
index 000000000000..cd55d80137f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
@@ -0,0 +1,220 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,pru-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Programmable Realtime Unit (PRU) cores
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  Each Programmable Real-Time Unit and Industrial Communication Subsystem
+  (PRU-ICSS or PRUSS) has two 32-bit load/store RISC CPU cores called
+  Programmable Real-Time Units (PRUs), each represented by a node. Each PRU
+  core has a dedicated Instruction RAM, Control and Debug register sets, and
+  use the Data RAMs present within the PRU-ICSS for code execution.
+
+  The K3 SoCs containing ICSSG v1.0 (eg: AM65x SR1.0) also have two Auxiliary
+  PRU cores called RTUs with slightly different IP integration. The K3 SoCs
+  containing the revised ICSSG v1.1 (eg: J721E, AM65x SR2.0) have an extra two
+  auxiliary Transmit PRU cores called Tx_PRUs that augment the PRUs. Each RTU
+  or Tx_PRU core can also be used independently like a PRU, or alongside a
+  corresponding PRU core to provide/implement auxiliary functionality/support.
+
+  Each PRU, RTU or Tx_PRU core node should be defined as a child node of the
+  corresponding PRU-ICSS node. Each node can optionally be rendered inactive by
+  using the standard DT string property, "status".
+
+  Please see the overall PRU-ICSS bindings document for additional details
+  including a complete example,
+    Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
+
+properties:
+  compatible:
+    enum:
+      - ti,am3356-pru   # for AM335x SoC family (AM3356+ SoCs only)
+      - ti,am4376-pru   # for AM437x SoC family (AM4376+ SoCs only)
+      - ti,am5728-pru   # for AM57xx SoC family
+      - ti,am625-pru    # for PRUs in K3 AM62x SoC family
+      - ti,am642-pru    # for PRUs in K3 AM64x SoC family
+      - ti,am642-rtu    # for RTUs in K3 AM64x SoC family
+      - ti,am642-tx-pru # for Tx_PRUs in K3 AM64x SoC family
+      - ti,am654-pru    # for PRUs in K3 AM65x SoC family
+      - ti,am654-rtu    # for RTUs in K3 AM65x SoC family
+      - ti,am654-tx-pru # for Tx_PRUs in K3 AM65x SR2.0 SoCs
+      - ti,j721e-pru    # for PRUs in K3 J721E SoC family
+      - ti,j721e-rtu    # for RTUs in K3 J721E SoC family
+      - ti,j721e-tx-pru # for Tx_PRUs in K3 J721E SoC family
+      - ti,k2g-pru      # for 66AK2G SoC family
+
+  reg:
+    items:
+      - description: Address and Size of the PRU Instruction RAM
+      - description: Address and Size of the PRU CTRL sub-module registers
+      - description: Address and Size of the PRU Debug sub-module registers
+
+  reg-names:
+    items:
+      - const: iram
+      - const: control
+      - const: debug
+
+  firmware-name:
+    description: |
+      Should contain the name of the default firmware image
+      file located on the firmware search path.
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,am654-rtu
+        - ti,j721e-rtu
+        - ti,am642-rtu
+then:
+  properties:
+    $nodename:
+      pattern: "^rtu@[0-9a-f]+$"
+else:
+  if:
+    properties:
+      compatible:
+        enum:
+          - ti,am654-tx-pru
+          - ti,j721e-tx-pru
+          - ti,am642-tx-pru
+  then:
+    properties:
+      $nodename:
+        pattern: "^txpru@[0-9a-f]+"
+  else:
+    properties:
+      $nodename:
+        pattern: "^pru@[0-9a-f]+$"
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - firmware-name
+
+additionalProperties: false
+
+examples:
+  - |
+    /* AM33xx PRU-ICSS */
+    pruss_tm: target-module@300000 {  /* 0x4a300000, ap 9 04.0 */
+      compatible = "ti,sysc-pruss", "ti,sysc";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0x0 0x300000 0x80000>;
+
+      pruss: pruss@0 {
+        compatible = "ti,am3356-pruss";
+        reg = <0x0 0x80000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pruss_mem: memories@0 {
+          reg = <0x0 0x2000>,
+                <0x2000 0x2000>,
+                <0x10000 0x3000>;
+          reg-names = "dram0", "dram1", "shrdram2";
+        };
+
+        pru0: pru@34000 {
+          compatible = "ti,am3356-pru";
+          reg = <0x34000 0x2000>,
+                <0x22000 0x400>,
+                <0x22400 0x100>;
+          reg-names = "iram", "control", "debug";
+          firmware-name = "am335x-pru0-fw";
+        };
+
+        pru1: pru@38000 {
+          compatible = "ti,am3356-pru";
+          reg = <0x38000 0x2000>,
+                <0x24000 0x400>,
+                <0x24400 0x100>;
+          reg-names = "iram", "control", "debug";
+          firmware-name = "am335x-pru1-fw";
+        };
+      };
+    };
+
+  - |
+    /* AM65x SR2.0 ICSSG */
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    icssg0: icssg@b000000 {
+      compatible = "ti,am654-icssg";
+      reg = <0xb000000 0x80000>;
+      power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0x0 0xb000000 0x80000>;
+
+      icssg0_mem: memories@0 {
+        reg = <0x0 0x2000>,
+              <0x2000 0x2000>,
+              <0x10000 0x10000>;
+        reg-names = "dram0", "dram1", "shrdram2";
+      };
+
+      pru0_0: pru@34000 {
+        compatible = "ti,am654-pru";
+        reg = <0x34000 0x4000>,
+              <0x22000 0x100>,
+              <0x22400 0x100>;
+        reg-names = "iram", "control", "debug";
+        firmware-name = "am65x-pru0_0-fw";
+      };
+
+      rtu0_0: rtu@4000 {
+        compatible = "ti,am654-rtu";
+        reg = <0x4000 0x2000>,
+              <0x23000 0x100>,
+              <0x23400 0x100>;
+        reg-names = "iram", "control", "debug";
+        firmware-name = "am65x-rtu0_0-fw";
+      };
+
+      tx_pru0_0: txpru@a000 {
+        compatible = "ti,am654-tx-pru";
+        reg = <0xa000 0x1800>,
+              <0x25000 0x100>,
+              <0x25400 0x100>;
+        reg-names = "iram", "control", "debug";
+        firmware-name = "am65x-txpru0_0-fw";
+      };
+
+      pru0_1: pru@38000 {
+        compatible = "ti,am654-pru";
+        reg = <0x38000 0x4000>,
+              <0x24000 0x100>,
+              <0x24400 0x100>;
+        reg-names = "iram", "control", "debug";
+        firmware-name = "am65x-pru0_1-fw";
+      };
+
+      rtu0_1: rtu@6000 {
+        compatible = "ti,am654-rtu";
+        reg = <0x6000 0x2000>,
+              <0x23800 0x100>,
+              <0x23c00 0x100>;
+        reg-names = "iram", "control", "debug";
+        firmware-name = "am65x-rtu0_1-fw";
+      };
+
+      tx_pru0_1: txpru@c000 {
+        compatible = "ti,am654-tx-pru";
+        reg = <0xc000 0x1800>,
+              <0x25800 0x100>,
+              <0x25c00 0x100>;
+        reg-names = "iram", "control", "debug";
+        firmware-name = "am65x-txpru0_1-fw";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/google,open-dice.yaml b/Documentation/devicetree/bindings/reserved-memory/google,open-dice.yaml
new file mode 100644
index 000000000000..a924fcfca085
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/google,open-dice.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/google,open-dice.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Open Profile for DICE
+
+description: |
+  This binding represents a reserved memory region containing data
+  generated by the Open Profile for DICE protocol.
+
+  See https://pigweed.googlesource.com/open-dice/
+
+maintainers:
+  - David Brazdil <dbrazdil@google.com>
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    const: google,open-dice
+
+  reg:
+    description: page-aligned region of memory containing DICE data
+
+required:
+  - compatible
+  - reg
+  - no-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        dice: dice@12340000 {
+            compatible = "google,open-dice";
+            reg = <0x00 0x12340000 0x2000>;
+            no-map;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml b/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml
new file mode 100644
index 000000000000..592f180e6b0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/memory-region.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Reserved Memory Region
+
+maintainers:
+  - devicetree-spec@vger.kernel.org
+
+description: |
+  Regions in the /reserved-memory node may be referenced by other device
+  nodes by adding a memory-region property to the device node.
+
+select: true
+
+properties:
+  memory-region:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: >
+      Phandle to a /reserved-memory child node assigned to the device.
+
+  memory-region-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: >
+      A list of names, one for each corresponding entry in the
+      memory-region property
+
+additionalProperties: true
+
+examples:
+  - |
+    fb0: video@12300000 {
+        /* ... */
+        reg = <0x12300000 0x1000>;
+        memory-region = <&display_reserved>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra210-emc-table.yaml b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra210-emc-table.yaml
new file mode 100644
index 000000000000..b1b0421a4255
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra210-emc-table.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/nvidia,tegra210-emc-table.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 EMC Frequency Table
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: On Tegra210, firmware passes a binary representation of the
+  EMC frequency table via a reserved memory region.
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    const: nvidia,tegra210-emc-table
+
+  reg:
+    description: region of memory reserved by firmware to pass the EMC
+      frequency table
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
diff --git a/Documentation/devicetree/bindings/reserved-memory/phram.yaml b/Documentation/devicetree/bindings/reserved-memory/phram.yaml
new file mode 100644
index 000000000000..6c4db28015f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/phram.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/phram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTD/block device in RAM
+
+description: |
+  Specifies that the reserved memory region can be used as an MTD or block
+  device.
+
+  The "phram" node is named after the "MTD in PHysical RAM" driver which
+  provides an implementation of this functionality in Linux.
+
+maintainers:
+  - Vincent Whitchurch <vincent.whitchurch@axis.com>
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+  - $ref: "/schemas/mtd/mtd.yaml"
+
+properties:
+  compatible:
+    const: phram
+
+  reg:
+    description: region of memory that can be used as an MTD/block device
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        phram: flash@12340000 {
+            compatible = "phram";
+            label = "rootfs";
+            reg = <0x12340000 0x00800000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
deleted file mode 100644
index 68395530c0a5..000000000000
--- a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Command DB
----------
-
-Command DB is a database that provides a mapping between resource key and the
-resource address for a system resource managed by a remote processor. The data
-is stored in a shared memory region and is loaded by the remote processor.
-
-Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for
-controlling shared resources. Depending on the board configuration the shared
-resource properties may change. These properties are dynamically probed by the
-remote processor and made available in the shared memory.
-
-The bindings for Command DB is specified in the reserved-memory section in
-devicetree. The devicetree representation of the command DB driver should be:
-
-Properties:
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Should be "qcom,cmd-db"
-
-- reg:
-	Usage: required
-	Value type: <prop encoded array>
-	Definition: The register address that points to the actual location of
-		    the Command DB in memory.
-
-Example:
-
-	reserved-memory {
-		[...]
-		reserved-memory@85fe0000 {
-			reg = <0x0 0x85fe0000 0x0 0x20000>;
-			compatible = "qcom,cmd-db";
-			no-map;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.yaml b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.yaml
new file mode 100644
index 000000000000..df1b5e0ed3f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reserved-memory/qcom,cmd-db.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Command DB
+
+description: |
+  Command DB is a database that provides a mapping between resource key and the
+  resource address for a system resource managed by a remote processor. The data
+  is stored in a shared memory region and is loaded by the remote processor.
+
+  Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for
+  controlling shared resources. Depending on the board configuration the shared
+  resource properties may change. These properties are dynamically probed by the
+  remote processor and made available in the shared memory.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    const: qcom,cmd-db
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        reserved-memory@85fe0000 {
+            reg = <0x85fe0000 0x20000>;
+            compatible = "qcom,cmd-db";
+            no-map;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt
deleted file mode 100644
index 8562ba1dce69..000000000000
--- a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Qualcomm Remote File System Memory binding
-
-This binding describes the Qualcomm remote filesystem memory, which serves the
-purpose of describing the shared memory region used for remote processors to
-access block device data using the Remote Filesystem protocol.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be:
-		    "qcom,rmtfs-mem"
-
-- reg:
-	Usage: required for static allocation
-	Value type: <prop-encoded-array>
-	Definition: must specify base address and size of the memory region,
-		    as described in reserved-memory.txt
-
-- size:
-	Usage: required for dynamic allocation
-	Value type: <prop-encoded-array>
-	Definition: must specify a size of the memory region, as described in
-		    reserved-memory.txt
-
-- qcom,client-id:
-	Usage: required
-	Value type: <u32>
-	Definition: identifier of the client to use this region for buffers.
-
-- qcom,vmid:
-	Usage: optional
-	Value type: <u32>
-	Definition: vmid of the remote processor, to set up memory protection.
-
-= EXAMPLE
-The following example shows the remote filesystem memory setup for APQ8016,
-with the rmtfs region for the Hexagon DSP (id #1) located at 0x86700000.
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		rmtfs@86700000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0 0x86700000 0x0 0xe0000>;
-			no-map;
-
-			qcom,client-id = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml
new file mode 100644
index 000000000000..2998f1c8f0db
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reserved-memory/qcom,rmtfs-mem.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Remote File System Memory
+
+description: |
+  This binding describes the Qualcomm remote filesystem memory, which serves the
+  purpose of describing the shared memory region used for remote processors to
+  access block device data using the Remote Filesystem protocol.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    const: qcom,rmtfs-mem
+
+  qcom,client-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      identifier of the client to use this region for buffers
+
+  qcom,vmid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      vmid of the remote processor, to set up memory protection
+
+required:
+  - qcom,client-id
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        rmtfs@86700000 {
+            compatible = "qcom,rmtfs-mem";
+            reg = <0x86700000 0xe0000>;
+            no-map;
+
+            qcom,client-id = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/ramoops.txt b/Documentation/devicetree/bindings/reserved-memory/ramoops.txt
deleted file mode 100644
index 0eba562fe5c6..000000000000
--- a/Documentation/devicetree/bindings/reserved-memory/ramoops.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Ramoops oops/panic logger
-=========================
-
-ramoops provides persistent RAM storage for oops and panics, so they can be
-recovered after a reboot. This is a child-node of "/reserved-memory", and
-is named "ramoops" after the backend, rather than "pstore" which is the
-subsystem.
-
-Parts of this storage may be set aside for other persistent log buffers, such
-as kernel log messages, or for optional ECC error-correction data.  The total
-size of these optional buffers must fit in the reserved region.
-
-Any remaining space will be used for a circular buffer of oops and panic
-records.  These records have a configurable size, with a size of 0 indicating
-that they should be disabled.
-
-At least one of "record-size", "console-size", "ftrace-size", or "pmsg-size"
-must be set non-zero, but are otherwise optional as listed below.
-
-
-Required properties:
-
-- compatible: must be "ramoops"
-
-- reg: region of memory that is preserved between reboots
-
-
-Optional properties:
-
-- ecc-size: enables ECC support and specifies ECC buffer size in bytes
-  (defaults to 0: no ECC)
-
-- record-size: maximum size in bytes of each dump done on oops/panic
-  (defaults to 0: disabled)
-
-- console-size: size in bytes of log buffer reserved for kernel messages
-  (defaults to 0: disabled)
-
-- ftrace-size: size in bytes of log buffer reserved for function tracing and
-  profiling (defaults to 0: disabled)
-
-- pmsg-size: size in bytes of log buffer reserved for userspace messages
-  (defaults to 0: disabled)
-
-- unbuffered: if present, use unbuffered mappings to map the reserved region
-  (defaults to buffered mappings)
-
-- no-dump-oops: if present, only dump panics (defaults to panics and oops)
-
-- flags: if present, pass ramoops behavioral flags (defaults to 0,
-  see include/linux/pstore_ram.h RAMOOPS_FLAG_* for flag values).
diff --git a/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml b/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml
new file mode 100644
index 000000000000..0391871cf44d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reserved-memory/ramoops.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Ramoops oops/panic logger
+
+description: |
+  ramoops provides persistent RAM storage for oops and panics, so they can be
+  recovered after a reboot. This is a child-node of "/reserved-memory", and
+  is named "ramoops" after the backend, rather than "pstore" which is the
+  subsystem.
+
+  Parts of this storage may be set aside for other persistent log buffers, such
+  as kernel log messages, or for optional ECC error-correction data.  The total
+  size of these optional buffers must fit in the reserved region.
+
+  Any remaining space will be used for a circular buffer of oops and panic
+  records.  These records have a configurable size, with a size of 0 indicating
+  that they should be disabled.
+
+  At least one of "record-size", "console-size", "ftrace-size", or "pmsg-size"
+  must be set non-zero, but are otherwise optional as listed below.
+
+maintainers:
+  - Kees Cook <keescook@chromium.org>
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    const: ramoops
+
+  reg:
+    description: region of memory that is preserved between reboots
+
+  ecc-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: enables ECC support and specifies ECC buffer size in bytes
+    default: 0 # no ECC
+
+  record-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum size in bytes of each kmsg dump
+    default: 0
+
+  console-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: size in bytes of log buffer reserved for kernel messages
+    default: 0
+
+  ftrace-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: size in bytes of log buffer reserved for function tracing and profiling
+    default: 0
+
+  pmsg-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: size in bytes of log buffer reserved for userspace messages
+    default: 0
+
+  mem-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: if present, sets the type of mapping is to be used to map the reserved region.
+    default: 0
+    oneOf:
+      - const: 0
+        description: write-combined
+      - const: 1
+        description: unbuffered
+      - const: 2
+        description: cached
+
+  max-reason:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2 # log oopses and panics
+    maximum: 0x7fffffff
+    description: |
+      If present, sets maximum type of kmsg dump reasons to store.
+      This can be set to INT_MAX to store all kmsg dumps.
+      See include/linux/kmsg_dump.h KMSG_DUMP_* for other kmsg dump reason values.
+      Setting this to 0 (KMSG_DUMP_UNDEF), means the reason filtering will be
+      controlled by the printk.always_kmsg_dump boot param.
+      If unset, it will be 2 (KMSG_DUMP_OOPS), otherwise 5 (KMSG_DUMP_MAX).
+
+  flags:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description: |
+      If present, pass ramoops behavioral flags
+      (see include/linux/pstore_ram.h RAMOOPS_FLAG_* for flag values).
+
+  no-dump-oops:
+    deprecated: true
+    type: boolean
+    description: |
+      Use max_reason instead. If present, and max_reason is not specified,
+      it is equivalent to max_reason = 1 (KMSG_DUMP_PANIC).
+
+  unbuffered:
+    deprecated: true
+    type: boolean
+    description: |
+      Use mem_type instead. If present, and mem_type is not specified,
+      it is equivalent to mem_type = 1 and uses unbuffered mappings to map
+      the reserved region (defaults to buffered mappings mem_type = 0).
+      If both are specified -- "mem_type" overrides "unbuffered".
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+anyOf:
+  - required: [record-size]
+  - required: [console-size]
+  - required: [ftrace-size]
+  - required: [pmsg-size]
+
+examples:
+  - |
+    / {
+        compatible = "foo";
+        model = "foo";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        reserved-memory {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            ramoops@bfdf0000 {
+                compatible = "ramoops";
+                reg = <0xbfdf0000 0x10000>; /* 64kB */
+                console-size = <0x8000>;    /* 32kB */
+                record-size = <0x400>;      /*  1kB */
+                ecc-size = <16>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
index bac4afa3b197..1810701a8509 100644
--- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
@@ -1,136 +1 @@
-*** Reserved memory regions ***
-
-Reserved memory is specified as a node under the /reserved-memory node.
-The operating system shall exclude reserved memory from normal usage
-one can create child nodes describing particular reserved (excluded from
-normal use) memory regions. Such memory regions are usually designed for
-the special usage by various device drivers.
-
-Parameters for each memory region can be encoded into the device tree
-with the following nodes:
-
-/reserved-memory node
----------------------
-#address-cells, #size-cells (required) - standard definition
-    - Should use the same values as the root node
-ranges (required) - standard definition
-    - Should be empty
-
-/reserved-memory/ child nodes
------------------------------
-Each child of the reserved-memory node specifies one or more regions of
-reserved memory. Each child node may either use a 'reg' property to
-specify a specific range of reserved memory, or a 'size' property with
-optional constraints to request a dynamically allocated block of memory.
-
-Following the generic-names recommended practice, node names should
-reflect the purpose of the node (ie. "framebuffer" or "dma-pool"). Unit
-address (@<address>) should be appended to the name if the node is a
-static allocation.
-
-Properties:
-Requires either a) or b) below.
-a) static allocation
-   reg (required) - standard definition
-b) dynamic allocation
-   size (required) - length based on parent's #size-cells
-                   - Size in bytes of memory to reserve.
-   alignment (optional) - length based on parent's #size-cells
-                        - Address boundary for alignment of allocation.
-   alloc-ranges (optional) - prop-encoded-array (address, length pairs).
-                           - Specifies regions of memory that are
-                             acceptable to allocate from.
-
-If both reg and size are present, then the reg property takes precedence
-and size is ignored.
-
-Additional properties:
-compatible (optional) - standard definition
-    - may contain the following strings:
-        - shared-dma-pool: This indicates a region of memory meant to be
-          used as a shared pool of DMA buffers for a set of devices. It can
-          be used by an operating system to instantiate the necessary pool
-          management subsystem if necessary.
-        - vendor specific string in the form <vendor>,[<device>-]<usage>
-no-map (optional) - empty property
-    - Indicates the operating system must not create a virtual mapping
-      of the region as part of its standard mapping of system memory,
-      nor permit speculative access to it under any circumstances other
-      than under the control of the device driver using the region.
-reusable (optional) - empty property
-    - The operating system can use the memory in this region with the
-      limitation that the device driver(s) owning the region need to be
-      able to reclaim it back. Typically that means that the operating
-      system can use that region to store volatile or cached data that
-      can be otherwise regenerated or migrated elsewhere.
-
-Linux implementation note:
-- If a "linux,cma-default" property is present, then Linux will use the
-  region for the default pool of the contiguous memory allocator.
-
-- If a "linux,dma-default" property is present, then Linux will use the
-  region for the default pool of the consistent DMA allocator.
-
-Device node references to reserved memory
------------------------------------------
-Regions in the /reserved-memory node may be referenced by other device
-nodes by adding a memory-region property to the device node.
-
-memory-region (optional) - phandle, specifier pairs to children of /reserved-memory
-
-Example
--------
-This example defines 3 contiguous regions are defined for Linux kernel:
-one default of all device drivers (named linux,cma@72000000 and 64MiB in size),
-one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB), and
-one for multimedia processing (named multimedia-memory@77000000, 64MiB).
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* global autoconfigured region for contiguous allocations */
-		linux,cma {
-			compatible = "shared-dma-pool";
-			reusable;
-			size = <0x4000000>;
-			alignment = <0x2000>;
-			linux,cma-default;
-		};
-
-		display_reserved: framebuffer@78000000 {
-			reg = <0x78000000 0x800000>;
-		};
-
-		multimedia_reserved: multimedia@77000000 {
-			compatible = "acme,multimedia-memory";
-			reg = <0x77000000 0x4000000>;
-		};
-	};
-
-	/* ... */
-
-	fb0: video@12300000 {
-		memory-region = <&display_reserved>;
-		/* ... */
-	};
-
-	scaler: scaler@12500000 {
-		memory-region = <&multimedia_reserved>;
-		/* ... */
-	};
-
-	codec: codec@12600000 {
-		memory-region = <&multimedia_reserved>;
-		/* ... */
-	};
-};
+This file has been moved to reserved-memory.yaml.
diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml
new file mode 100644
index 000000000000..44f72bcf1782
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/reserved-memory.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: /reserved-memory Child Node Common
+
+maintainers:
+  - devicetree-spec@vger.kernel.org
+
+description: >
+  Reserved memory is specified as a node under the /reserved-memory node. The
+  operating system shall exclude reserved memory from normal usage one can
+  create child nodes describing particular reserved (excluded from normal use)
+  memory regions. Such memory regions are usually designed for the special
+  usage by various device drivers.
+
+  Each child of the reserved-memory node specifies one or more regions
+  of reserved memory. Each child node may either use a 'reg' property to
+  specify a specific range of reserved memory, or a 'size' property with
+  optional constraints to request a dynamically allocated block of
+  memory.
+
+  Following the generic-names recommended practice, node names should
+  reflect the purpose of the node (ie. "framebuffer" or "dma-pool").
+  Unit address (@<address>) should be appended to the name if the node
+  is a static allocation.
+
+properties:
+  reg: true
+
+  size:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    description: >
+      Length based on parent's \#size-cells. Size in bytes of memory to
+      reserve.
+
+  alignment:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    description: >
+      Length based on parent's \#size-cells. Address boundary for
+      alignment of allocation.
+
+  alloc-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      Address and Length pairs. Specifies regions of memory that are
+      acceptable to allocate from.
+
+  no-map:
+    type: boolean
+    description: >
+      Indicates the operating system must not create a virtual mapping
+      of the region as part of its standard mapping of system memory,
+      nor permit speculative access to it under any circumstances other
+      than under the control of the device driver using the region.
+
+  reusable:
+    type: boolean
+    description: >
+      The operating system can use the memory in this region with the
+      limitation that the device driver(s) owning the region need to be
+      able to reclaim it back. Typically that means that the operating
+      system can use that region to store volatile or cached data that
+      can be otherwise regenerated or migrated elsewhere.
+
+allOf:
+  - if:
+      required:
+        - no-map
+
+    then:
+      not:
+        required:
+          - reusable
+
+  - if:
+      required:
+        - reusable
+
+    then:
+      not:
+        required:
+          - no-map
+
+oneOf:
+  - required:
+      - reg
+
+  - required:
+      - size
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml b/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml
new file mode 100644
index 000000000000..618105f079be
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/shared-dma-pool.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: /reserved-memory DMA pool node bindings
+
+maintainers:
+  - devicetree-spec@vger.kernel.org
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    oneOf:
+      - const: shared-dma-pool
+        description: >
+          This indicates a region of memory meant to be used as a shared
+          pool of DMA buffers for a set of devices. It can be used by an
+          operating system to instantiate the necessary pool management
+          subsystem if necessary.
+
+      - const: restricted-dma-pool
+        description: >
+          This indicates a region of memory meant to be used as a pool
+          of restricted DMA buffers for a set of devices. The memory
+          region would be the only region accessible to those devices.
+          When using this, the no-map and reusable properties must not
+          be set, so the operating system can create a virtual mapping
+          that will be used for synchronization. The main purpose for
+          restricted DMA is to mitigate the lack of DMA access control
+          on systems without an IOMMU, which could result in the DMA
+          accessing the system memory at unexpected times and/or
+          unexpected addresses, possibly leading to data leakage or
+          corruption. The feature on its own provides a basic level of
+          protection against the DMA overwriting buffer contents at
+          unexpected times. However, to protect against general data
+          leakage and system memory corruption, the system needs to
+          provide way to lock down the memory access, e.g., MPU. Note
+          that since coherent allocation needs remapping, one must set
+          up another device coherent pool by shared-dma-pool and use
+          dma_alloc_from_dev_coherent instead for atomic coherent
+          allocation.
+
+  linux,cma-default:
+    type: boolean
+    description: >
+      If this property is present, then Linux will use the region for
+      the default pool of the contiguous memory allocator.
+
+  linux,dma-default:
+    type: boolean
+    description: >
+      If this property is present, then Linux will use the region for
+      the default pool of the consistent DMA allocator.
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: restricted-dma-pool
+then:
+  properties:
+    no-map: false
+    reusable: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      reserved-memory {
+          #address-cells = <1>;
+          #size-cells = <1>;
+          ranges;
+
+          /* global autoconfigured region for contiguous allocations */
+          linux,cma {
+              compatible = "shared-dma-pool";
+              reusable;
+              size = <0x4000000>;
+              alignment = <0x2000>;
+              linux,cma-default;
+          };
+
+          display_reserved: framebuffer@78000000 {
+              reg = <0x78000000 0x800000>;
+          };
+
+          restricted_dma_reserved: restricted-dma-pool@50000000 {
+              compatible = "restricted-dma-pool";
+              reg = <0x50000000 0x4000000>;
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml b/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml
index 001c0d2a8c1f..2a248e511c18 100644
--- a/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/reset/allwinner,sun6i-a31-clock-reset.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 Peripheral Reset Controller Device Tree Bindings
+title: Allwinner A31 Peripheral Reset Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml
new file mode 100644
index 000000000000..4379cec6b35a
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/altr,rst-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SOCFPGA Reset Manager
+
+maintainers:
+  - Dinh Nguyen <dinguyen@altera.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: Cyclone5/Arria5/Arria10
+        const: altr,rst-mgr
+      - description: Stratix10 ARM64 SoC
+        items:
+          - const: altr,stratix10-rst-mgr
+          - const: altr,rst-mgr
+
+  reg:
+    maxItems: 1
+
+  altr,modrst-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset of the first modrst register
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - altr,modrst-offset
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    rstmgr@ffd05000 {
+        compatible = "altr,rst-mgr";
+        reg = <0xffd05000 0x1000>;
+        altr,modrst-offset = <0x10>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
deleted file mode 100644
index 43e580ef64ba..000000000000
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Amlogic audio memory arbiter controller
-
-The Amlogic Audio ARB is a simple device which enables or
-disables the access of Audio FIFOs to DDR on AXG based SoC.
-
-Required properties:
-- compatible: 'amlogic,meson-axg-audio-arb' or
-	      'amlogic,meson-sm1-audio-arb'
-- reg: physical base address of the controller and length of memory
-       mapped region.
-- clocks: phandle to the fifo peripheral clock provided by the audio
-	  clock controller.
-- #reset-cells: must be 1.
-
-Example on the A113 SoC:
-
-arb: reset-controller@280 {
-	compatible = "amlogic,meson-axg-audio-arb";
-	reg = <0x0 0x280 0x0 0x4>;
-	#reset-cells = <1>;
-	clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
-};
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml
new file mode 100644
index 000000000000..704a502adc5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/amlogic,meson-axg-audio-arb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic audio memory arbiter controller
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+description: The Amlogic Audio ARB is a simple device which enables or disables
+  the access of Audio FIFOs to DDR on AXG based SoC.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-axg-audio-arb
+      - amlogic,meson-sm1-audio-arb
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: |
+      phandle to the fifo peripheral clock provided by the audio clock
+      controller.
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    // on the A113 SoC:
+    #include <dt-bindings/clock/axg-audio-clkc.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        arb: reset-controller@280 {
+            compatible = "amlogic,meson-axg-audio-arb";
+            reg = <0x0 0x280 0x0 0x4>;
+            #reset-cells = <1>;
+            clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
index b3f57d81f007..98db2aa74dc8 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson SoC Reset Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 properties:
   compatible:
@@ -17,6 +17,7 @@ properties:
       - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs
       - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
       - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
+      - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
 
   reg:
     maxItems: 1
@@ -29,6 +30,8 @@ required:
   - reg
   - "#reset-cells"
 
+additionalProperties: false
+
 examples:
   - |
     reset-controller@c884404 {
diff --git a/Documentation/devicetree/bindings/reset/ath79-reset.txt b/Documentation/devicetree/bindings/reset/ath79-reset.txt
deleted file mode 100644
index 4c56330bf398..000000000000
--- a/Documentation/devicetree/bindings/reset/ath79-reset.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Binding for Qualcomm Atheros AR7xxx/AR9XXX reset controller
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required Properties:
-- compatible: has to be "qca,<soctype>-reset", "qca,ar7100-reset"
-              as fallback
-- reg: Base address and size of the controllers memory area
-- #reset-cells : Specifies the number of cells needed to encode reset
-                 line, should be 1
-
-Example:
-
-	reset-controller@1806001c {
-		compatible = "qca,ar9132-reset", "qca,ar7100-reset";
-		reg = <0x1806001c 0x4>;
-
-		#reset-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml b/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml
new file mode 100644
index 000000000000..98465d26949e
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/atmel,at91sam9260-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel/Microchip System Reset Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  The system reset controller can be used to reset the CPU. In case of
+  SAMA7G5 it can also reset some devices (e.g. USB PHYs).
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91sam9260-rstc
+              - atmel,at91sam9g45-rstc
+              - atmel,sama5d3-rstc
+              - microchip,sam9x60-rstc
+              - microchip,sama7g5-rstc
+      - items:
+          - const: atmel,sama5d3-rstc
+          - const: atmel,at91sam9g45-rstc
+
+  reg:
+    minItems: 1
+    items:
+      - description: base registers for system reset control
+      - description: registers for device specific reset control
+
+  clocks:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sama7g5-rstc
+    then:
+      required:
+        - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+
+    reset-controller@fffffd00 {
+        compatible = "atmel,at91sam9260-rstc";
+        reg = <0xfffffd00 0x10>;
+        clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/berlin,reset.txt b/Documentation/devicetree/bindings/reset/berlin,reset.txt
deleted file mode 100644
index 514fee098b4b..000000000000
--- a/Documentation/devicetree/bindings/reset/berlin,reset.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Marvell Berlin reset controller
-===============================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-The reset controller node must be a sub-node of the chip controller
-node on Berlin SoCs.
-
-Required properties:
-- compatible: should be "marvell,berlin2-reset"
-- #reset-cells: must be set to 2
-
-Example:
-
-chip_rst: reset {
-	compatible = "marvell,berlin2-reset";
-	#reset-cells = <2>;
-};
-
-&usb_phy0 {
-	resets = <&chip_rst 0x104 12>;
-};
diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
deleted file mode 100644
index a6f8455ae6c4..000000000000
--- a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Bitmain BM1880 SoC Reset Controller
-===================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible:   Should be "bitmain,bm1880-reset"
-- reg:          Offset and length of reset controller space in SCTRL.
-- #reset-cells: Must be 1.
-
-Example:
-
-        rst: reset-controller@c00 {
-                compatible = "bitmain,bm1880-reset";
-                reg = <0xc00 0x8>;
-                #reset-cells = <1>;
-        };
diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml
new file mode 100644
index 000000000000..f0aca744388c
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Manivannan Sadhasivam <mani@kernel.org>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/bitmain,bm1880-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Bitmain BM1880 SoC Reset Controller
+
+maintainers:
+  - Manivannan Sadhasivam <mani@kernel.org>
+
+properties:
+  compatible:
+    const: bitmain,bm1880-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rst: reset-controller@c00 {
+        compatible = "bitmain,bm1880-reset";
+        reg = <0xc00 0x8>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml
new file mode 100644
index 000000000000..88aebb370838
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom MISC block PCIe reset controller
+
+description: This document describes reset controller handling PCIe PERST#
+  signals. On BCM4908 it's a part of the MISC block.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: brcm,bcm4908-misc-pcie-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    description: PCIe core id
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@ff802644 {
+        compatible = "brcm,bcm4908-misc-pcie-reset";
+        reg = <0xff802644 0x04>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml
new file mode 100644
index 000000000000..560cf6522cb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/brcm,bcm6345-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: BCM6345 reset controller
+
+description: This document describes the BCM6345 reset controller.
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm6345-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@10000010 {
+      compatible = "brcm,bcm6345-reset";
+      reg = <0x10000010 0x4>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
index 411bd76f1b64..dfce6738b033 100644
--- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
@@ -7,7 +7,9 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: BCM7216 RESCAL reset controller
 
-description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216.
+description: This document describes the BCM7216 RESCAL reset controller
+  which is responsible for controlling the reset of the SATA and PCIe0/1
+  instances on BCM7216.
 
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
@@ -28,6 +30,8 @@ required:
   - reg
   - "#reset-cells"
 
+additionalProperties: false
+
 examples:
   - |
     reset-controller@8b2c800 {
diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
deleted file mode 100644
index ee59409640f2..000000000000
--- a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Broadcom STB SW_INIT-style reset controller
-===========================================
-
-Broadcom STB SoCs have a SW_INIT-style reset controller with separate
-SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit
-reset lines.
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: should be brcm,brcmstb-reset
-- reg: register base and length
-- #reset-cells: must be set to 1
-
-Example:
-
-	reset: reset-controller@8404318 {
-		compatible = "brcm,brcmstb-reset";
-		reg = <0x8404318 0x30>;
-		#reset-cells = <1>;
-	};
-
-	&ethernet_switch {
-		resets = <&reset 26>;
-		reset-names = "switch";
-	};
diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml
new file mode 100644
index 000000000000..e00efa88a198
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/brcm,brcmstb-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Broadcom STB SW_INIT-style reset controller
+
+description:
+  Broadcom STB SoCs have a SW_INIT-style reset controller with separate
+  SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit
+  reset lines.
+
+  Please also refer to reset.txt in this directory for common reset
+  controller binding usage.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,brcmstb-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@8404318 {
+      compatible = "brcm,brcmstb-reset";
+      reg = <0x8404318 0x30>;
+      #reset-cells = <1>;
+    };
+
+    ethernet_switch {
+      resets = <&reset 26>;
+      reset-names = "switch";
+    };
diff --git a/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml
new file mode 100644
index 000000000000..ee8a2dcf5dfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/canaan,k210-rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 Reset Controller
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description: |
+  Canaan Kendryte K210 reset controller driver which supports the SoC
+  system controller supplied reset registers for the various peripherals
+  of the SoC. The K210 reset controller node must be defined as a child
+  node of the K210 system controller node.
+
+  See also:
+  - dt-bindings/reset/k210-rst.h
+
+properties:
+  compatible:
+    const: canaan,k210-rst
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - '#reset-cells'
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/k210-rst.h>
+    sysrst: reset-controller {
+      compatible = "canaan,k210-rst";
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml b/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml
new file mode 100644
index 000000000000..0e5ee8decc0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/delta,tn48m-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD reset controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  This module is part of the Delta TN48M multi-function device. For more
+  details see ../mfd/delta,tn48m-cpld.yaml.
+
+  Reset controller modules provides resets for the following:
+  * 88F7040 SoC
+  * 88F6820 SoC
+  * 98DX3265 switch MAC-s
+  * 88E1680 PHY-s
+  * 88E1512 PHY
+  * PoE PSE controller
+
+properties:
+  compatible:
+    const: delta,tn48m-reset
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#reset-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt
deleted file mode 100644
index 6ed79e60248a..000000000000
--- a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Freescale i.MX System Reset Controller
-======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: Should be "fsl,<chip>-src"
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain SRC interrupt and CPU WDOG interrupt,
-  in this order.
-- #reset-cells: 1, see below
-
-example:
-
-src: src@20d8000 {
-        compatible = "fsl,imx6q-src";
-        reg = <0x020d8000 0x4000>;
-        interrupts = <0 91 0x04 0 96 0x04>;
-        #reset-cells = <1>;
-};
-
-Specifying reset lines connected to IP modules
-==============================================
-
-The system reset controller can be used to reset the GPU, VPU,
-IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device
-nodes should specify the reset line on the SRC in their resets
-property, containing a phandle to the SRC device node and a
-RESET_INDEX specifying which module to reset, as described in
-reset.txt
-
-example:
-
-        ipu1: ipu@2400000 {
-                resets = <&src 2>;
-        };
-        ipu2: ipu@2800000 {
-                resets = <&src 4>;
-        };
-
-The following RESET_INDEX values are valid for i.MX5:
-GPU_RESET     0
-VPU_RESET     1
-IPU1_RESET    2
-OPEN_VG_RESET 3
-The following additional RESET_INDEX value is valid for i.MX6:
-IPU2_RESET    4
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml
new file mode 100644
index 000000000000..b11ac533f914
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/fsl,imx-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX System Reset Controller
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The system reset controller can be used to reset the GPU, VPU,
+  IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device
+  nodes should specify the reset line on the SRC in their resets
+  property, containing a phandle to the SRC device node and a
+  RESET_INDEX specifying which module to reset, as described in
+  reset.txt
+
+  The following RESET_INDEX values are valid for i.MX5:
+    GPU_RESET     0
+    VPU_RESET     1
+    IPU1_RESET    2
+    OPEN_VG_RESET 3
+  The following additional RESET_INDEX value is valid for i.MX6:
+    IPU2_RESET    4
+
+properties:
+  compatible:
+    oneOf:
+      - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx50-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx53-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6q-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6sx-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6sl-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6ul-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6sll-src"
+          - const: "fsl,imx51-src"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: SRC interrupt
+      - description: CPU WDOG interrupts out of SRC
+    minItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@73fd0000 {
+        compatible = "fsl,imx51-src";
+        reg = <0x73fd0000 0x4000>;
+        interrupts = <75>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
deleted file mode 100644
index c2489e41a801..000000000000
--- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-Freescale i.MX7 System Reset Controller
-======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible:
-	- For i.MX7 SoCs should be "fsl,imx7d-src", "syscon"
-	- For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon"
-	- For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain SRC interrupt
-- #reset-cells: 1, see below
-
-example:
-
-src: reset-controller@30390000 {
-     compatible = "fsl,imx7d-src", "syscon";
-     reg = <0x30390000 0x2000>;
-     interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-     #reset-cells = <1>;
-};
-
-
-Specifying reset lines connected to IP modules
-==============================================
-
-The system reset controller can be used to reset various set of
-peripherals. Device nodes that need access to reset lines should
-specify them as a reset phandle in their corresponding node as
-specified in reset.txt.
-
-Example:
-
-	pcie: pcie@33800000 {
-
-		...
-
-		resets = <&src IMX7_RESET_PCIEPHY>,
-			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
-		reset-names = "pciephy", "apps";
-
-		...
-        };
-
-
-For list of all valid reset indices see
-<dt-bindings/reset/imx7-reset.h> for i.MX7,
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml
new file mode 100644
index 000000000000..00430e2eabc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/fsl,imx7-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7 System Reset Controller
+
+maintainers:
+  - Andrey Smirnov <andrew.smirnov@gmail.com>
+
+description: |
+  The system reset controller can be used to reset various set of
+  peripherals. Device nodes that need access to reset lines should
+  specify them as a reset phandle in their corresponding node as
+  specified in reset.txt.
+
+  For list of all valid reset indices see
+    <dt-bindings/reset/imx7-reset.h> for i.MX7,
+    <dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ, i.MX8MM and i.MX8MN,
+    <dt-bindings/reset/imx8mp-reset.h> for i.MX8MP.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx7d-src
+              - fsl,imx8mq-src
+              - fsl,imx8mp-src
+          - const: syscon
+      - items:
+          - enum:
+              - fsl,imx8mm-src
+              - fsl,imx8mn-src
+          - const: fsl,imx8mq-src
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    reset-controller@30390000 {
+        compatible = "fsl,imx7d-src", "syscon";
+        reg = <0x30390000 0x2000>;
+        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
deleted file mode 100644
index 2df4bddeb688..000000000000
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Hisilicon System Reset Controller
-======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-The reset controller registers are part of the system-ctl block on
-hi3660 and hi3670 SoCs.
-
-Required properties:
-- compatible: should be one of the following:
-		 "hisilicon,hi3660-reset" for HI3660
-		 "hisilicon,hi3670-reset", "hisilicon,hi3660-reset" for HI3670
-- hisi,rst-syscon: phandle of the reset's syscon.
-- #reset-cells : Specifies the number of cells needed to encode a
-  reset source.  The type shall be a <u32> and the value shall be 2.
-
-	 Cell #1 : offset of the reset assert control
-	           register from the syscon register base
-		   offset + 4: deassert control register
-		   offset + 8: status control register
-	 Cell #2 : bit position of the reset in the reset control register
-
-Example:
-	iomcu: iomcu@ffd7e000 {
-		compatible = "hisilicon,hi3660-iomcu", "syscon";
-		reg = <0x0 0xffd7e000 0x0 0x1000>;
-	};
-
-	iomcu_rst: iomcu_rst_controller {
-		compatible = "hisilicon,hi3660-reset";
-		hisi,rst-syscon = <&iomcu>;
-		#reset-cells = <2>;
-	};
-
-Specifying reset lines connected to IP modules
-==============================================
-example:
-
-        i2c0: i2c@..... {
-                ...
-		resets = <&iomcu_rst 0x20 3>; /* offset: 0x20; bit: 3 */
-                ...
-        };
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
new file mode 100644
index 000000000000..cdfcf32c53fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/hisilicon,hi3660-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon System Reset Controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  Please also refer to reset.txt in this directory for common reset
+  controller binding usage.
+  The reset controller registers are part of the system-ctl block on
+  hi3660 and hi3670 SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: hisilicon,hi3660-reset
+      - items:
+          - const: hisilicon,hi3670-reset
+          - const: hisilicon,hi3660-reset
+
+  hisi,rst-syscon:
+    deprecated: true
+    description: phandle of the reset's syscon, use hisilicon,rst-syscon instead
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  hisilicon,rst-syscon:
+    description: phandle of the reset's syscon.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#reset-cells':
+    description: |
+      Specifies the number of cells needed to encode a reset source.
+      Cell #1 : offset of the reset assert control register from the syscon
+                register base
+                offset + 4: deassert control register
+                offset + 8: status control register
+      Cell #2 : bit position of the reset in the reset control register
+    const: 2
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/hi3660-clock.h>
+
+    iomcu: iomcu@ffd7e000 {
+        compatible = "hisilicon,hi3660-iomcu", "syscon";
+        reg = <0xffd7e000 0x1000>;
+    };
+
+    iomcu_rst: iomcu_rst_controller {
+        compatible = "hisilicon,hi3660-reset";
+        hisilicon,rst-syscon = <&iomcu>;
+        #reset-cells = <2>;
+    };
+
+    /* Specifying reset lines connected to IP modules */
+    i2c@ffd71000 {
+        compatible = "snps,designware-i2c";
+        reg = <0xffd71000 0x1000>;
+        interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <400000>;
+        clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>;
+        resets = <&iomcu_rst 0x20 3>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
deleted file mode 100644
index ea0a6a9734c1..000000000000
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Hisilicon System Reset Controller
-======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-The reset controller registers are part of the system-ctl block on
-hi6220 SoC.
-
-Required properties:
-- compatible: should be one of the following:
-  - "hisilicon,hi6220-sysctrl", "syscon" : For peripheral reset controller.
-  - "hisilicon,hi6220-mediactrl", "syscon" : For media reset controller.
-  - "hisilicon,hi6220-aoctrl", "syscon" : For ao reset controller.
-- reg: should be register base and length as documented in the
-  datasheet
-- #reset-cells: 1, see below
-
-Example:
-sys_ctrl: sys_ctrl@f7030000 {
-	compatible = "hisilicon,hi6220-sysctrl", "syscon";
-	reg = <0x0 0xf7030000 0x0 0x2000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
-
-Specifying reset lines connected to IP modules
-==============================================
-example:
-
-        uart1: serial@..... {
-                ...
-                resets = <&sys_ctrl PERIPH_RSTEN3_UART1>;
-                ...
-        };
-
-The index could be found in <dt-bindings/reset/hisi,hi6220-resets.h>.
diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
index 8ac437282659..13bf6bb3f097 100644
--- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
+++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
@@ -21,8 +21,7 @@ properties:
 
   intel,global-reset:
     description: Global reset register offset and bit offset.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
       - description: Register offset
       - description: Register bit offset
@@ -58,7 +57,6 @@ examples:
     };
 
     pwm: pwm@e0d00000 {
-        status = "disabled";
         compatible = "intel,lgm-pwm";
         reg = <0xe0d00000 0x30>;
         clocks = <&cgu0 1>;
diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.txt b/Documentation/devicetree/bindings/reset/lantiq,reset.txt
deleted file mode 100644
index c6aef36b7d15..000000000000
--- a/Documentation/devicetree/bindings/reset/lantiq,reset.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Lantiq XWAY SoC RCU reset controller binding
-============================================
-
-This binding describes a reset-controller found on the RCU module on Lantiq
-XWAY SoCs.
-
-This node has to be a sub node of the Lantiq RCU block.
-
--------------------------------------------------------------------------------
-Required properties:
-- compatible		: Should be one of
-				"lantiq,danube-reset"
-				"lantiq,xrx200-reset"
-- reg			: Defines the following sets of registers in the parent
-			  syscon device
-			- Offset of the reset set register
-			- Offset of the reset status register
-- #reset-cells		: Specifies the number of cells needed to encode the
-			  reset line, should be 2.
-			  The first cell takes the reset set bit and the
-			  second cell takes the status bit.
-
--------------------------------------------------------------------------------
-Example for the reset-controllers on the xRX200 SoCs:
-	reset0: reset-controller@10 {
-		compatible = "lantiq,xrx200-reset";
-		reg <0x10 0x04>, <0x14 0x04>;
-
-		#reset-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.yaml b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml
new file mode 100644
index 000000000000..15d65a5dd631
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/lantiq,reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq XWAY SoC RCU reset controller
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+  This binding describes a reset-controller found on the RCU module on Lantiq
+  XWAY SoCs. This node has to be a sub node of the Lantiq RCU block.
+
+properties:
+  compatible:
+    enum:
+      - lantiq,danube-reset
+      - lantiq,xrx200-reset
+
+  reg:
+    description: |
+      Defines the following sets of registers in the parent syscon device
+      Offset of the reset set register
+      Offset of the reset status register
+    maxItems: 2
+
+  '#reset-cells':
+    description: |
+      The first cell takes the reset set bit and the second cell takes the
+      status bit.
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // On the xRX200 SoCs:
+    reset0: reset-controller@10 {
+        compatible = "lantiq,xrx200-reset";
+        reg = <0x10 0x04>, <0x14 0x04>;
+        #reset-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml
new file mode 100644
index 000000000000..d71d0f0a13ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2015 Antoine Tenart <atenart@kernel.org>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/marvell,berlin2-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Marvell Berlin reset controller
+
+maintainers:
+  - Antoine Tenart <atenart@kernel.org>
+
+description: The reset controller node must be a sub-node of the chip
+  controller node on Berlin SoCs.
+
+properties:
+  compatible:
+    const: marvell,berlin2-reset
+
+  "#reset-cells":
+    const: 2
+
+required:
+  - compatible
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    chip: chip-control@ea0000 {
+        reg = <0xea0000 0x400>;
+
+        chip_rst: reset {
+            compatible = "marvell,berlin2-reset";
+            #reset-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reset/microchip,rst.yaml b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
new file mode 100644
index 000000000000..81cd8c837623
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/microchip,rst.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Microchip Sparx5 Switch Reset Controller
+
+maintainers:
+  - Steen Hegelund <steen.hegelund@microchip.com>
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  The Microchip Sparx5 Switch provides reset control and implements the following
+  functions
+    - One Time Switch Core Reset (Soft Reset)
+
+properties:
+  $nodename:
+    pattern: "^reset-controller@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - microchip,sparx5-switch-reset
+      - microchip,lan966x-switch-reset
+
+  reg:
+    items:
+      - description: global control block registers
+
+  reg-names:
+    items:
+      - const: gcb
+
+  "#reset-cells":
+    const: 1
+
+  cpu-syscon:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: syscon used to access CPU reset
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#reset-cells"
+  - cpu-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@11010008 {
+        compatible = "microchip,sparx5-switch-reset";
+        reg = <0x11010008 0x4>;
+        reg-names = "gcb";
+        #reset-cells = <1>;
+        cpu-syscon = <&cpu_ctrl>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
deleted file mode 100644
index 6e802703af60..000000000000
--- a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Nuvoton NPCM Reset controller
-
-Required properties:
-- compatible : "nuvoton,npcm750-reset" for NPCM7XX BMC
-- reg : specifies physical base address and size of the register.
-- #reset-cells: must be set to 2
-
-Optional property:
-- nuvoton,sw-reset-number - Contains the software reset number to restart the SoC.
-  NPCM7xx contain four software reset that represent numbers 1 to 4.
-
-  If 'nuvoton,sw-reset-number' is not specfied software reset is disabled.
-
-Example:
-	rstc: rstc@f0801000 {
-		compatible = "nuvoton,npcm750-reset";
-		reg = <0xf0801000 0x70>;
-		#reset-cells = <2>;
-		nuvoton,sw-reset-number = <2>;
-	};
-
-Specifying reset lines connected to IP NPCM7XX modules
-======================================================
-example:
-
-        spi0: spi@..... {
-                ...
-                resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
-                ...
-        };
-
-The index could be found in <dt-bindings/reset/nuvoton,npcm7xx-reset.h>.
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml
new file mode 100644
index 000000000000..d82e65e37cc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/nuvoton,npcm750-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Reset controller
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-reset        # Poleg NPCM7XX SoC
+      - nuvoton,npcm845-reset        # Arbel NPCM8XX SoC
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 2
+
+  nuvoton,sysgcr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to access GCR registers.
+
+  nuvoton,sw-reset-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+    description: |
+      Contains the software reset number to restart the SoC.
+      If not specified, software reset is disabled.
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+  - nuvoton,sysgcr
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
+    rstc: rstc@f0801000 {
+        compatible = "nuvoton,npcm750-reset";
+        reg = <0xf0801000 0x70>;
+        #reset-cells = <2>;
+        nuvoton,sysgcr = <&gcr>;
+        nuvoton,sw-reset-number = <2>;
+    };
+
+    // Specifying reset lines connected to IP NPCM7XX modules
+    spi0: spi {
+        resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml
new file mode 100644
index 000000000000..9be60e55cd71
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2015 Alban Bedel <albeu@free.fr>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/qca,ar7100-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Atheros AR7xxx/AR9XXX reset controller
+
+maintainers:
+  - Alban Bedel <albeu@free.fr>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qca,ar9132-reset
+          - qca,ar9331-reset
+      - const: qca,ar7100-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@1806001c {
+          compatible = "qca,ar9132-reset", "qca,ar7100-reset";
+          reg = <0x1806001c 0x4>;
+          #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
index e2d85a1e1d63..d92e2b3cc83f 100644
--- a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm AOSS Reset Controller
 
 maintainers:
-  - Sibi Sankar <sibis@codeaurora.org>
+  - Sibi Sankar <quic_sibis@quicinc.com>
 
 description:
   The bindings describe the reset-controller found on AOSS-CC (always on
@@ -21,6 +21,11 @@ properties:
           - const: "qcom,sc7180-aoss-cc"
           - const: "qcom,sdm845-aoss-cc"
 
+      - description: on SC7280 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sc7280-aoss-cc"
+          - const: "qcom,sdm845-aoss-cc"
+
       - description: on SDM845 SoCs the following compatibles must be specified
         items:
           - const: "qcom,sdm845-aoss-cc"
diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
index d7d8cec9419f..ca5d79332189 100644
--- a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
+++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm PDC Global
 
 maintainers:
-  - Sibi Sankar <sibis@codeaurora.org>
+  - Sibi Sankar <quic_sibis@quicinc.com>
 
 description:
   The bindings describes the reset-controller found on PDC-Global (Power Domain
@@ -21,6 +21,10 @@ properties:
           - const: "qcom,sc7180-pdc-global"
           - const: "qcom,sdm845-pdc-global"
 
+      - description: on SC7280 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sc7280-pdc-global"
+
       - description: on SDM845 SoCs the following compatibles must be specified
         items:
           - const: "qcom,sdm845-pdc-global"
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
deleted file mode 100644
index de7f06ccd003..000000000000
--- a/Documentation/devicetree/bindings/reset/renesas,rst.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-DT bindings for the Renesas R-Car and RZ/G Reset Controllers
-
-The R-Car and RZ/G Reset Controllers provide reset control, and implement the
-following functions:
-  - Latching of the levels on mode pins when PRESET# is negated,
-  - Mode monitoring register,
-  - Reset control of peripheral devices (on R-Car Gen1),
-  - Watchdog timer (on R-Car Gen1),
-  - Register-based reset control and boot address registers for the various CPU
-    cores (on R-Car Gen2 and Gen3, and on RZ/G).
-
-
-Required properties:
-  - compatible: Should be
-		  - "renesas,<soctype>-reset-wdt" for R-Car Gen1,
-		  - "renesas,<soctype>-rst" for R-Car Gen2 and Gen3, and RZ/G
-		Examples with soctypes are:
-		  - "renesas,r8a7743-rst" (RZ/G1M)
-		  - "renesas,r8a7744-rst" (RZ/G1N)
-		  - "renesas,r8a7745-rst" (RZ/G1E)
-		  - "renesas,r8a77470-rst" (RZ/G1C)
-		  - "renesas,r8a774a1-rst" (RZ/G2M)
-		  - "renesas,r8a774b1-rst" (RZ/G2N)
-		  - "renesas,r8a774c0-rst" (RZ/G2E)
-		  - "renesas,r8a7778-reset-wdt" (R-Car M1A)
-		  - "renesas,r8a7779-reset-wdt" (R-Car H1)
-		  - "renesas,r8a7790-rst" (R-Car H2)
-		  - "renesas,r8a7791-rst" (R-Car M2-W)
-		  - "renesas,r8a7792-rst" (R-Car V2H
-		  - "renesas,r8a7793-rst" (R-Car M2-N)
-		  - "renesas,r8a7794-rst" (R-Car E2)
-		  - "renesas,r8a7795-rst" (R-Car H3)
-		  - "renesas,r8a7796-rst" (R-Car M3-W)
-		  - "renesas,r8a77961-rst" (R-Car M3-W+)
-		  - "renesas,r8a77965-rst" (R-Car M3-N)
-		  - "renesas,r8a77970-rst" (R-Car V3M)
-		  - "renesas,r8a77980-rst" (R-Car V3H)
-		  - "renesas,r8a77990-rst" (R-Car E3)
-		  - "renesas,r8a77995-rst" (R-Car D3)
-  - reg: Address start and address range for the device.
-
-
-Example:
-
-	rst: reset-controller@e6160000 {
-		compatible = "renesas,r8a7795-rst";
-		reg = <0 0xe6160000 0 0x0200>;
-	};
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
new file mode 100644
index 000000000000..0d1b89e2fe9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/renesas,rst.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas R-Car and RZ/G Reset Controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+  The R-Car and RZ/G Reset Controllers provide reset control, and implement the
+  following functions:
+    - Latching of the levels on mode pins when PRESET# is negated,
+    - Mode monitoring register,
+    - Reset control of peripheral devices (on R-Car Gen1),
+    - Watchdog timer (on R-Car Gen1),
+    - Register-based reset control and boot address registers for the various
+      CPU cores (on R-Car Gen2 and Gen3, and on RZ/G).
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a7742-rst       # RZ/G1H
+      - renesas,r8a7743-rst       # RZ/G1M
+      - renesas,r8a7744-rst       # RZ/G1N
+      - renesas,r8a7745-rst       # RZ/G1E
+      - renesas,r8a77470-rst      # RZ/G1C
+      - renesas,r8a774a1-rst      # RZ/G2M
+      - renesas,r8a774b1-rst      # RZ/G2N
+      - renesas,r8a774c0-rst      # RZ/G2E
+      - renesas,r8a774e1-rst      # RZ/G2H
+      - renesas,r8a7778-reset-wdt # R-Car M1A
+      - renesas,r8a7779-reset-wdt # R-Car H1
+      - renesas,r8a7790-rst       # R-Car H2
+      - renesas,r8a7791-rst       # R-Car M2-W
+      - renesas,r8a7792-rst       # R-Car V2H
+      - renesas,r8a7793-rst       # R-Car M2-N
+      - renesas,r8a7794-rst       # R-Car E2
+      - renesas,r8a7795-rst       # R-Car H3
+      - renesas,r8a7796-rst       # R-Car M3-W
+      - renesas,r8a77961-rst      # R-Car M3-W+
+      - renesas,r8a77965-rst      # R-Car M3-N
+      - renesas,r8a77970-rst      # R-Car V3M
+      - renesas,r8a77980-rst      # R-Car V3H
+      - renesas,r8a77990-rst      # R-Car E3
+      - renesas,r8a77995-rst      # R-Car D3
+      - renesas,r8a779a0-rst      # R-Car V3U
+      - renesas,r8a779f0-rst      # R-Car S4-8
+      - renesas,r8a779g0-rst      # R-Car V4H
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rst: reset-controller@e6160000 {
+            compatible = "renesas,r8a7795-rst";
+            reg = <0xe6160000 0x0200>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
new file mode 100644
index 000000000000..731b8ce01525
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/renesas,rzg2l-usbphy-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,V2L} USBPHY Control
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description:
+  The RZ/G2L USBPHY Control mainly controls reset and power down of the
+  USB/PHY.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL
+          - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC}
+          - renesas,r9a07g054-usbphy-ctrl # RZ/V2L
+      - const: renesas,rzg2l-usbphy-ctrl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+    description: |
+      The phandle's argument in the reset specifier is the PHY reset associated
+      with the USB port.
+      0 = Port 1 Phy reset
+      1 = Port 2 Phy reset
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - power-domains
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    phyrst: usbphy-ctrl@11c40000 {
+        compatible = "renesas,r9a07g044-usbphy-ctrl",
+                     "renesas,rzg2l-usbphy-ctrl";
+        reg = <0x11c40000 0x10000>;
+        clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
+        resets = <&cpg R9A07G044_USB_PRESETN>;
+        power-domains = <&cpg>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/sirf,rstc.txt b/Documentation/devicetree/bindings/reset/sirf,rstc.txt
deleted file mode 100644
index 0505de742d30..000000000000
--- a/Documentation/devicetree/bindings/reset/sirf,rstc.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-CSR SiRFSoC Reset Controller
-======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: Should be "sirf,prima2-rstc" or "sirf,marco-rstc"
-- reg: should be register base and length as documented in the
-  datasheet
-- #reset-cells: 1, see below
-
-example:
-
-rstc: reset-controller@88010000 {
-	compatible = "sirf,prima2-rstc";
-	reg = <0x88010000 0x1000>;
-	#reset-cells = <1>;
-};
-
-Specifying reset lines connected to IP modules
-==============================================
-
-The reset controller(rstc) manages various reset sources. This module provides
-reset signals for most blocks in system. Those device nodes should specify the
-reset line on the rstc in their resets property, containing a phandle to the
-rstc device node and a RESET_INDEX specifying which module to reset, as described
-in reset.txt.
-
-For SiRFSoC, RESET_INDEX is just reset_bit defined in SW_RST0 and SW_RST1 registers.
-For modules whose rest_bit is in SW_RST0, its RESET_INDEX is 0~31. For modules whose
-rest_bit is in SW_RST1, its RESET_INDEX is 32~63.
-
-example:
-
-vpp@90020000 {
-	compatible = "sirf,prima2-vpp";
-	reg = <0x90020000 0x10000>;
-	interrupts = <31>;
-	clocks = <&clks 35>;
-	resets = <&rstc 6>;
-};
diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
deleted file mode 100644
index 32d8435a41df..000000000000
--- a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Binding for the AXS10x reset controller
-
-This binding describes the ARC AXS10x boards custom IP-block which allows
-to control reset signals of selected peripherals. For example DW GMAC, etc...
-This block is controlled via memory-mapped register (AKA CREG) which
-represents up-to 32 reset lines.
-
-As of today only the following lines are used:
- - DW GMAC - line 5
-
-This binding uses the common reset binding[1].
-
-[1] Documentation/devicetree/bindings/reset/reset.txt
-
-Required properties:
-- compatible: should be "snps,axs10x-reset".
-- reg: should always contain pair address - length: for creg reset
-  bits register.
-- #reset-cells: from common reset binding; Should always be set to 1.
-
-Example:
-	reset: reset-controller@11220 {
-		compatible = "snps,axs10x-reset";
-		#reset-cells = <1>;
-		reg = <0x11220 0x4>;
-	};
-
-Specifying reset lines connected to IP modules:
-	ethernet@.... {
-		....
-		resets = <&reset 5>;
-		....
-	};
diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml
new file mode 100644
index 000000000000..a75db3d405af
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/snps,axs10x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXS10x reset controller
+
+maintainers:
+  - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+
+description: |
+  This binding describes the ARC AXS10x boards custom IP-block which allows
+  to control reset signals of selected peripherals. For example DW GMAC, etc...
+  This block is controlled via memory-mapped register (AKA CREG) which
+  represents up-to 32 reset lines.
+  As of today only the following lines are used:
+   - DW GMAC - line 5
+
+properties:
+  compatible:
+    const: snps,axs10x-reset
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@11220 {
+        compatible = "snps,axs10x-reset";
+        #reset-cells = <1>;
+        reg = <0x11220 0x4>;
+    };
+
+    // Specifying reset lines connected to IP modules:
+    ethernet {
+        resets = <&reset 5>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/snps,dw-reset.txt b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
index f94f911dd98d..0c241d4aae76 100644
--- a/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
+++ b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
@@ -23,7 +23,7 @@ example:
 		#reset-cells = <1>;
 	};
 
-	dw_rst_2: reset-controller@1000 {i
+	dw_rst_2: reset-controller@1000 {
 		compatible = "snps,dw-low-reset";
 		reg = <0x1000 0x8>;
 		#reset-cells = <1>;
diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
deleted file mode 100644
index 38fe34fd8b8a..000000000000
--- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Altera SOCFPGA Reset Manager
-
-Required properties:
-- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10)
-	       "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC
-- reg : Should contain 1 register ranges(address and length)
-- altr,modrst-offset : Should contain the offset of the first modrst register.
-- #reset-cells: 1
-
-Example:
-	 rstmgr@ffd05000 {
-		#reset-cells = <1>;
-		compatible = "altr,rst-mgr";
-		reg = <0xffd05000 0x1000>;
-		altr,modrst-offset = <0x10>;
-	};
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
new file mode 100644
index 000000000000..0a2c13e1e230
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/socionext,uniphier-glue-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier peripheral core reset in glue layer
+
+description: |
+  Some peripheral core reset belongs to its own glue layer. Before using
+  this core reset, it is necessary to control the clocks and resets to
+  enable this layer. These clocks and resets should be described in each
+  property.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-usb3-reset
+      - socionext,uniphier-pro5-usb3-reset
+      - socionext,uniphier-pxs2-usb3-reset
+      - socionext,uniphier-ld20-usb3-reset
+      - socionext,uniphier-pxs3-usb3-reset
+      - socionext,uniphier-nx1-usb3-reset
+      - socionext,uniphier-pro4-ahci-reset
+      - socionext,uniphier-pxs2-ahci-reset
+      - socionext,uniphier-pxs3-ahci-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names: true
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pro4-usb3-reset
+              - socionext,uniphier-pro5-usb3-reset
+              - socionext,uniphier-pro4-ahci-reset
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    usb-glue@65b00000 {
+        compatible = "simple-mfd";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65b00000 0x400>;
+
+        usb_rst: reset@0 {
+            compatible = "socionext,uniphier-ld20-usb3-reset";
+            reg = <0x0 0x4>;
+            #reset-cells = <1>;
+            clock-names = "link";
+            clocks = <&sys_clk 14>;
+            reset-names = "link";
+            resets = <&sys_rst 14>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
new file mode 100644
index 000000000000..6566804ec567
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/socionext,uniphier-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier reset controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: System reset
+        enum:
+          - socionext,uniphier-ld4-reset
+          - socionext,uniphier-pro4-reset
+          - socionext,uniphier-sld8-reset
+          - socionext,uniphier-pro5-reset
+          - socionext,uniphier-pxs2-reset
+          - socionext,uniphier-ld6b-reset
+          - socionext,uniphier-ld11-reset
+          - socionext,uniphier-ld20-reset
+          - socionext,uniphier-pxs3-reset
+          - socionext,uniphier-nx1-reset
+      - description: Media I/O (MIO) reset, SD reset
+        enum:
+          - socionext,uniphier-ld4-mio-reset
+          - socionext,uniphier-pro4-mio-reset
+          - socionext,uniphier-sld8-mio-reset
+          - socionext,uniphier-pro5-sd-reset
+          - socionext,uniphier-pxs2-sd-reset
+          - socionext,uniphier-ld11-mio-reset
+          - socionext,uniphier-ld11-sd-reset
+          - socionext,uniphier-ld20-sd-reset
+          - socionext,uniphier-pxs3-sd-reset
+          - socionext,uniphier-nx1-sd-reset
+      - description: Peripheral reset
+        enum:
+          - socionext,uniphier-ld4-peri-reset
+          - socionext,uniphier-pro4-peri-reset
+          - socionext,uniphier-sld8-peri-reset
+          - socionext,uniphier-pro5-peri-reset
+          - socionext,uniphier-pxs2-peri-reset
+          - socionext,uniphier-ld11-peri-reset
+          - socionext,uniphier-ld20-peri-reset
+          - socionext,uniphier-pxs3-peri-reset
+          - socionext,uniphier-nx1-peri-reset
+      - description: Analog signal amplifier reset
+        enum:
+          - socionext,uniphier-ld11-adamv-reset
+          - socionext,uniphier-ld20-adamv-reset
+
+  "#reset-cells":
+    const: 1
+
+  resets:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#reset-cells"
+
+examples:
+  - |
+    sysctrl@61840000 {
+        compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
+        reg = <0x61840000 0x4000>;
+
+        reset {
+            compatible = "socionext,uniphier-ld11-reset";
+            #reset-cells = <1>;
+        };
+
+        // other nodes ...
+    };
+
+  - |
+    mioctrl@59810000 {
+        compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
+        reg = <0x59810000 0x800>;
+
+        reset {
+            compatible = "socionext,uniphier-ld11-mio-reset";
+            #reset-cells = <1>;
+        };
+
+        // other nodes ...
+    };
+
+  - |
+    perictrl@59820000 {
+        compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
+        reg = <0x59820000 0x200>;
+
+        reset {
+            compatible = "socionext,uniphier-ld11-peri-reset";
+            #reset-cells = <1>;
+        };
+
+        // other nodes ...
+    };
+
+  - |
+    adamv@57920000 {
+        compatible = "socionext,uniphier-ld11-adamv", "simple-mfd", "syscon";
+        reg = <0x57920000 0x1000>;
+
+        reset {
+            compatible = "socionext,uniphier-ld11-adamv-reset";
+            #reset-cells = <1>;
+        };
+
+        // other nodes ...
+    };
diff --git a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
deleted file mode 100644
index 9ca27761f811..000000000000
--- a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-STMicroelectronics STi family Sysconfig Picophy SoftReset Controller
-=============================================================================
-
-This binding describes a reset controller device that is used to enable and
-disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in
-the STi family SoC system configuration registers.
-
-The actual action taken when softreset is asserted is hardware dependent.
-However, when asserted it may not be possible to access the hardware's
-registers and after an assert/deassert sequence the hardware's previous state
-may no longer be valid.
-
-Please refer to Documentation/devicetree/bindings/reset/reset.txt
-for common reset controller binding usage.
-
-Required properties:
-- compatible: Should be "st,stih407-picophyreset"
-- #reset-cells: 1, see below
-
-Example:
-
-	picophyreset: picophyreset-controller {
-		compatible = "st,stih407-picophyreset";
-		#reset-cells = <1>;
-	};
-
-Specifying picophyreset control of devices
-=======================================
-
-Device nodes should specify the reset channel required in their "resets"
-property, containing a phandle to the picophyreset device node and an
-index specifying which channel to use, as described in
-Documentation/devicetree/bindings/reset/reset.txt.
-
-Example:
-
-	usb2_picophy0: usbpicophy@0 {
-		resets = <&picophyreset STIH407_PICOPHY0_RESET>;
-	};
-
-Macro definitions for the supported reset channels can be found in:
-include/dt-bindings/reset/stih407-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
deleted file mode 100644
index 92527138bc93..000000000000
--- a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller
-=============================================================================
-
-This binding describes a reset controller device that is used to enable and
-disable on-chip peripheral controllers such as USB and SATA, using
-"powerdown" control bits found in the STi family SoC system configuration
-registers. These have been grouped together into a single reset controller
-device for convenience.
-
-The actual action taken when powerdown is asserted is hardware dependent.
-However, when asserted it may not be possible to access the hardware's
-registers and after an assert/deassert sequence the hardware's previous state
-may no longer be valid.
-
-Please refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: Should be "st,stih407-powerdown"
-- #reset-cells: 1, see below
-
-example:
-
-	powerdown: powerdown-controller {
-		compatible = "st,stih407-powerdown";
-		#reset-cells = <1>;
-	};
-
-
-Specifying powerdown control of devices
-=======================================
-
-Device nodes should specify the reset channel required in their "resets"
-property, containing a phandle to the powerdown device node and an
-index specifying which channel to use, as described in reset.txt
-
-example:
-
-	st_dwc3: dwc3@8f94000 {
-		resets          = <&powerdown STIH407_USB3_POWERDOWN>,
-	};
-
-Macro definitions for the supported reset channels can be found in:
-
-include/dt-bindings/reset/stih407-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml
new file mode 100644
index 000000000000..329ae4ae1a10
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/st,stih407-picophyreset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi family Sysconfig Picophy SoftReset Controller
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+  This binding describes a reset controller device that is used to enable and
+  disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in
+  the STi family SoC system configuration registers.
+
+  The actual action taken when softreset is asserted is hardware dependent.
+  However, when asserted it may not be possible to access the hardware's
+  registers and after an assert/deassert sequence the hardware's previous state
+  may no longer be valid.
+
+properties:
+  compatible:
+    const: st,stih407-picophyreset
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    picophyreset: picophyreset-controller {
+        compatible = "st,stih407-picophyreset";
+        #reset-cells = <1>;
+    };
+
+    // Specifying picophyreset control of devices
+    usb2_picophy0: usbpicophy {
+        resets = <&picophyreset STIH407_PICOPHY0_RESET>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
new file mode 100644
index 000000000000..d3790e602659
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/st,stih407-powerdown.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@st.com>
+
+description: |
+  This binding describes a reset controller device that is used to enable and
+  disable on-chip peripheral controllers such as USB and SATA, using
+  "powerdown" control bits found in the STi family SoC system configuration
+  registers. These have been grouped together into a single reset controller
+  device for convenience.
+
+  The actual action taken when powerdown is asserted is hardware dependent.
+  However, when asserted it may not be possible to access the hardware's
+  registers and after an assert/deassert sequence the hardware's previous state
+  may no longer be valid.
+
+properties:
+  compatible:
+    const: st,stih407-powerdown
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    powerdown: powerdown-controller {
+        compatible = "st,stih407-powerdown";
+        #reset-cells = <1>;
+    };
+
+    // Specifying powerdown control of devices:
+    st_dwc3: dwc3 {
+        resets = <&powerdown STIH407_USB3_POWERDOWN>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml b/Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
new file mode 100644
index 000000000000..2f5bd616b7ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/starfive,jh7100-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 SoC Reset Controller
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7100-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@11840000 {
+        compatible = "starfive,jh7100-reset";
+        reg = <0x11840000 0x10000>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/reset/sunplus,reset.yaml b/Documentation/devicetree/bindings/reset/sunplus,reset.yaml
new file mode 100644
index 000000000000..f24646ba9761
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/sunplus,reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/sunplus,reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Sunplus SoC Reset Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rstc: reset@9c000054 {
+      compatible = "sunplus,sp7021-reset";
+      reg = <0x9c000054 0x28>;
+      #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.txt b/Documentation/devicetree/bindings/reset/ti,sci-reset.txt
deleted file mode 100644
index 8b1cf022f18a..000000000000
--- a/Documentation/devicetree/bindings/reset/ti,sci-reset.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Texas Instruments System Control Interface (TI-SCI) Reset Controller
-=====================================================================
-
-Some TI SoCs contain a system controller (like the Power Management Micro
-Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
-the state of the various hardware modules present on the SoC. Communication
-between the host processor running an OS and the system controller happens
-through a protocol called TI System Control Interface (TI-SCI protocol).
-For TI SCI details, please refer to the document,
-Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-
-TI-SCI Reset Controller Node
-============================
-This reset controller node uses the TI SCI protocol to perform the reset
-management of various hardware modules present on the SoC. Must be a child
-node of the associated TI-SCI system controller node.
-
-Required properties:
---------------------
- - compatible	: Should be "ti,sci-reset"
- - #reset-cells	: Should be 2. Please see the reset consumer node below for
-		  usage details.
-
-TI-SCI Reset Consumer Nodes
-===========================
-Each of the reset consumer nodes should have the following properties,
-in addition to their own properties.
-
-Required properties:
---------------------
- - resets	: A phandle and reset specifier pair, one pair for each reset
-		  signal that affects the device, or that the device manages.
-		  The phandle should point to the TI-SCI reset controller node,
-		  and the reset specifier should have 2 cell-values. The first
-		  cell should contain the device ID. The second cell should
-		  contain the reset mask value used by system controller.
-		  Please refer to the protocol documentation for these values
-		  to be used for different devices,
-		  http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
-
-Please also refer to Documentation/devicetree/bindings/reset/reset.txt for
-common reset controller usage by consumers.
-
-Example:
---------
-The following example demonstrates both a TI-SCI reset controller node and a
-consumer (a DSP device) on the 66AK2G SoC.
-
-pmmc: pmmc {
-	compatible = "ti,k2g-sci";
-
-	k2g_reset: reset-controller {
-		compatible = "ti,sci-reset";
-		#reset-cells = <2>;
-	};
-};
-
-dsp0: dsp@10800000 {
-	...
-	resets = <&k2g_reset 0x0046 0x1>;
-	...
-};
diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
new file mode 100644
index 000000000000..4639d2cec557
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/ti,sci-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI reset controller node bindings
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Some TI SoCs contain a system controller (like the Power Management Micro
+  Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
+  the state of the various hardware modules present on the SoC. Communication
+  between the host processor running an OS and the system controller happens
+  through a protocol called TI System Control Interface (TI-SCI protocol).
+
+  This reset controller node uses the TI SCI protocol to perform the reset
+  management of various hardware modules present on the SoC. Must be a child
+  node of the associated TI-SCI system controller node.
+
+properties:
+  $nodename:
+    pattern: "^reset-controller$"
+
+  compatible:
+    const: ti,sci-reset
+
+  "#reset-cells":
+    const: 2
+    description:
+      The two cells represent values that the TI-SCI controller defines.
+
+      The first cell should contain the device ID.
+
+      The second cell should contain the reset mask corresponding to the device
+      used by system controller.
+
+      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      protocol documentation for the values to be used for different devices.
+
+
+additionalProperties: false
+
+examples:
+  - |
+    k3_reset: reset-controller {
+        compatible = "ti,sci-reset";
+        #reset-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml
new file mode 100644
index 000000000000..afc835eda0ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS380x reset controller node bindings
+
+maintainers:
+  - Marco Felsch <kernel@pengutronix.de>
+
+description: |
+  The TPS380x family [1] of supervisory circuits monitor supply voltages to
+  provide circuit initialization and timing supervision. The devices assert a
+  RESET signal if the voltage drops below a preset threshold or upon a manual
+  reset input (MR). The RESET output remains asserted for the factory
+  programmed delay after the voltage return above its threshold or after the
+  manual reset input is released.
+
+  [1] https://www.ti.com/product/TPS3801
+
+properties:
+  compatible:
+    enum:
+      - ti,tps3801
+
+  reset-gpios:
+    maxItems: 1
+    description: Reference to the GPIO connected to the MR pin.
+
+  "#reset-cells":
+    const: 0
+
+required:
+  - compatible
+  - reset-gpios
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    reset: reset-controller {
+        compatible = "ti,tps3801";
+        #reset-cells = <0>;
+        reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
deleted file mode 100644
index e320a8cc9e4d..000000000000
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ /dev/null
@@ -1,180 +0,0 @@
-UniPhier reset controller
-
-
-System reset
-------------
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-reset"  - for LD4 SoC
-    "socionext,uniphier-pro4-reset" - for Pro4 SoC
-    "socionext,uniphier-sld8-reset" - for sLD8 SoC
-    "socionext,uniphier-pro5-reset" - for Pro5 SoC
-    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
-    "socionext,uniphier-ld11-reset" - for LD11 SoC
-    "socionext,uniphier-ld20-reset" - for LD20 SoC
-    "socionext,uniphier-pxs3-reset" - for PXs3 SoC
-- #reset-cells: should be 1.
-
-Example:
-
-	sysctrl@61840000 {
-		compatible = "socionext,uniphier-ld11-sysctrl",
-			     "simple-mfd", "syscon";
-		reg = <0x61840000 0x4000>;
-
-		reset {
-			compatible = "socionext,uniphier-ld11-reset";
-			#reset-cells = <1>;
-		};
-
-		other nodes ...
-	};
-
-
-Media I/O (MIO) reset, SD reset
--------------------------------
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC
-    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC
-    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC
-    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC
-    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC
-    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
-    "socionext,uniphier-ld11-sd-reset"  - for LD11 SoC (SD)
-    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC
-    "socionext,uniphier-pxs3-sd-reset"  - for PXs3 SoC
-- #reset-cells: should be 1.
-
-Example:
-
-	mioctrl@59810000 {
-		compatible = "socionext,uniphier-ld11-mioctrl",
-			     "simple-mfd", "syscon";
-		reg = <0x59810000 0x800>;
-
-		reset {
-			compatible = "socionext,uniphier-ld11-mio-reset";
-			#reset-cells = <1>;
-		};
-
-		other nodes ...
-	};
-
-
-Peripheral reset
-----------------
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC
-    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC
-    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC
-    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC
-    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
-    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC
-    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC
-    "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC
-- #reset-cells: should be 1.
-
-Example:
-
-	perictrl@59820000 {
-		compatible = "socionext,uniphier-ld11-perictrl",
-			     "simple-mfd", "syscon";
-		reg = <0x59820000 0x200>;
-
-		reset {
-			compatible = "socionext,uniphier-ld11-peri-reset";
-			#reset-cells = <1>;
-		};
-
-		other nodes ...
-	};
-
-
-Analog signal amplifier reset
------------------------------
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-ld11-adamv-reset" - for LD11 SoC
-    "socionext,uniphier-ld20-adamv-reset" - for LD20 SoC
-- #reset-cells: should be 1.
-
-Example:
-
-	adamv@57920000 {
-		compatible = "socionext,uniphier-ld11-adamv",
-			     "simple-mfd", "syscon";
-		reg = <0x57920000 0x1000>;
-
-		adamv_rst: reset {
-			compatible = "socionext,uniphier-ld11-adamv-reset";
-			#reset-cells = <1>;
-		};
-
-		other nodes ...
-	};
-
-
-Peripheral core reset in glue layer
------------------------------------
-
-Some peripheral core reset belongs to its own glue layer. Before using
-this core reset, it is necessary to control the clocks and resets to enable
-this layer. These clocks and resets should be described in each property.
-
-Required properties:
-- compatible: Should be
-    "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3
-    "socionext,uniphier-pro5-usb3-reset" - for Pro5 SoC USB3
-    "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3
-    "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3
-    "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3
-    "socionext,uniphier-pro4-ahci-reset" - for Pro4 SoC AHCI
-    "socionext,uniphier-pxs2-ahci-reset" - for PXs2 SoC AHCI
-    "socionext,uniphier-pxs3-ahci-reset" - for PXs3 SoC AHCI
-- #reset-cells: Should be 1.
-- reg: Specifies offset and length of the register set for the device.
-- clocks: A list of phandles to the clock gate for the glue layer.
-	According to the clock-names, appropriate clocks are required.
-- clock-names: Should contain
-    "gio", "link" - for Pro4 and Pro5 SoCs
-    "link"        - for others
-- resets: A list of phandles to the reset control for the glue layer.
-	According to the reset-names, appropriate resets are required.
-- reset-names: Should contain
-    "gio", "link" - for Pro4 and Pro5 SoCs
-    "link"        - for others
-
-Example:
-
-	usb-glue@65b00000 {
-		compatible = "socionext,uniphier-ld20-dwc3-glue",
-			     "simple-mfd";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x65b00000 0x400>;
-
-		usb_rst: reset@0 {
-			compatible = "socionext,uniphier-ld20-usb3-reset";
-			reg = <0x0 0x4>;
-			#reset-cells = <1>;
-			clock-names = "link";
-			clocks = <&sys_clk 14>;
-			reset-names = "link";
-			resets = <&sys_rst 14>;
-		};
-
-		regulator {
-			...
-		};
-
-		phy {
-			...
-		};
-		...
-	};
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
index 27a45fe5ecf1..ed836868dbf1 100644
--- a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
+++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
@@ -1,7 +1,7 @@
 --------------------------------------------------------------------------
- =  Zynq UltraScale+ MPSoC reset driver binding =
+ =  Zynq UltraScale+ MPSoC and Versal reset driver binding =
 --------------------------------------------------------------------------
-The Zynq UltraScale+ MPSoC has several different resets.
+The Zynq UltraScale+ MPSoC and Versal has several different resets.
 
 See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
 about zynqmp resets.
@@ -10,7 +10,8 @@ Please also refer to reset.txt in this directory for common reset
 controller binding usage.
 
 Required Properties:
-- compatible:	"xlnx,zynqmp-reset"
+- compatible:	"xlnx,zynqmp-reset" for Zynq UltraScale+ MPSoC platform
+		"xlnx,versal-reset" for Versal platform
 - #reset-cells:	Specifies the number of cells needed to encode reset
 		line, should be 1
 
@@ -37,8 +38,10 @@ Device nodes that need access to reset lines should
 specify them as a reset phandle in their corresponding node as
 specified in reset.txt.
 
-For list of all valid reset indicies see
+For list of all valid reset indices for Zynq UltraScale+ MPSoC see
 <dt-bindings/reset/xlnx-zynqmp-resets.h>
+For list of all valid reset indices for Versal see
+<dt-bindings/reset/xlnx-versal-resets.h>
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
deleted file mode 100644
index b015508f9780..000000000000
--- a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-ZTE zx2967 SoCs Reset Controller
-=======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: should be one of the following.
-	* zte,zx296718-reset
-- reg: physical base address of the controller and length of memory mapped
-	region.
-- #reset-cells: must be 1.
-
-example:
-
-	reset: reset-controller@1461060 {
-		compatible = "zte,zx296718-reset";
-		reg = <0x01461060 0x8>;
-		#reset-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/riscv/canaan.yaml b/Documentation/devicetree/bindings/riscv/canaan.yaml
new file mode 100644
index 000000000000..f8f3f286bd55
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/canaan.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/canaan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan SoC-based boards
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description:
+  Canaan Kendryte K210 SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - const: sipeed,maix-bit
+          - const: sipeed,maix-bitm
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: sipeed,maix-go
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: sipeed,maix-dock-m1
+          - const: sipeed,maix-dock-m1w
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: sipeed,maixduino
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: canaan,kendryte-kd233
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: canaan,kendryte-k210
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
index 04819ad379c2..90a7cabf58fe 100644
--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -9,6 +9,7 @@ title: RISC-V bindings for 'cpus' DT nodes
 maintainers:
   - Paul Walmsley <paul.walmsley@sifive.com>
   - Palmer Dabbelt <palmer@sifive.com>
+  - Conor Dooley <conor@kernel.org>
 
 description: |
   This document uses some terminology common to the RISC-V community
@@ -28,11 +29,22 @@ properties:
       - items:
           - enum:
               - sifive,rocket0
+              - sifive,bullet0
               - sifive,e5
-              - sifive,e51
-              - sifive,u54-mc
+              - sifive,e7
+              - sifive,e71
+              - sifive,u74-mc
               - sifive,u54
+              - sifive,u74
               - sifive,u5
+              - sifive,u7
+              - canaan,k210
+          - const: riscv
+      - items:
+          - enum:
+              - sifive,e51
+              - sifive,u54-mc
+          - const: sifive,rocket0
           - const: riscv
       - const: riscv    # Simulator only
     description:
@@ -40,24 +52,24 @@ properties:
       and identifies the type of the hart.
 
   mmu-type:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/string"
-      - enum:
-          - riscv,sv32
-          - riscv,sv39
-          - riscv,sv48
     description:
       Identifies the MMU address translation mode used on this
       hart.  These values originate from the RISC-V Privileged
       Specification document, available from
       https://riscv.org/specifications/
+    $ref: "/schemas/types.yaml#/definitions/string"
+    enum:
+      - riscv,sv32
+      - riscv,sv39
+      - riscv,sv48
+      - riscv,none
+
+  riscv,cbom-block-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The blocksize in bytes for the Zicbom cache operations.
 
   riscv,isa:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/string"
-      - enum:
-          - rv64imac
-          - rv64imafdc
     description:
       Identifies the specific RISC-V instruction set architecture
       supported by the hart.  These are documented in the RISC-V
@@ -67,6 +79,8 @@ properties:
       While the isa strings in ISA specification are case
       insensitive, letters in the riscv,isa string must be all
       lowercase to simplify parsing.
+    $ref: "/schemas/types.yaml#/definitions/string"
+    pattern: ^rv(?:64|32)imaf?d?q?c?b?v?k?h?(?:_[hsxz](?:[a-z])+)*$
 
   # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
   timebase-frequency: false
@@ -89,10 +103,20 @@ properties:
       - compatible
       - interrupt-controller
 
+  cpu-idle-states:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      maxItems: 1
+    description: |
+      List of phandles to idle state nodes supported
+      by this hart (see ./idle-states.yaml).
+
 required:
   - riscv,isa
   - interrupt-controller
 
+additionalProperties: true
+
 examples:
   - |
     // Example 1: SiFive Freedom U540G Development Kit
diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml
new file mode 100644
index 000000000000..714d0fcab399
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/microchip.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/microchip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC-based boards
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+description:
+  Microchip PolarFire SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - microchip,mpfs-icicle-reference-rtlv2203
+              - microchip,mpfs-icicle-reference-rtlv2210
+          - const: microchip,mpfs-icicle-kit
+          - const: microchip,mpfs
+
+      - items:
+          - enum:
+              - aries,m100pfsevp
+              - microchip,mpfs-sev-kit
+              - sundance,polarberry
+          - const: microchip,mpfs
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml
new file mode 100644
index 000000000000..bf3f07421f7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/sifive,ccache0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Composable Cache Controller
+
+maintainers:
+  - Sagar Kadam <sagar.kadam@sifive.com>
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+
+description:
+  The SiFive Composable Cache Controller is used to provide access to fast copies
+  of memory for masters in a Core Complex. The Composable Cache Controller also
+  acts as directory-based coherency manager.
+  All the properties in ePAPR/DeviceTree specification applies for this platform.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - sifive,ccache0
+          - sifive,fu540-c000-ccache
+          - sifive,fu740-c000-ccache
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sifive,ccache0
+              - sifive,fu540-c000-ccache
+              - sifive,fu740-c000-ccache
+          - const: cache
+      - items:
+          - const: microchip,mpfs-ccache
+          - const: sifive,fu540-c000-ccache
+          - const: cache
+
+  cache-block-size:
+    const: 64
+
+  cache-level:
+    enum: [2, 3]
+
+  cache-sets:
+    enum: [1024, 2048]
+
+  cache-size:
+    const: 2097152
+
+  cache-unified: true
+
+  interrupts:
+    minItems: 3
+    items:
+      - description: DirError interrupt
+      - description: DataError interrupt
+      - description: DataFail interrupt
+      - description: DirFail interrupt
+
+  reg:
+    maxItems: 1
+
+  next-level-cache: true
+
+  memory-region:
+    maxItems: 1
+    description: |
+      The reference to the reserved-memory for the L2 Loosely Integrated Memory region.
+      The reserved memory node should be defined as per the bindings in reserved-memory.txt.
+
+allOf:
+  - $ref: /schemas/cache-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sifive,fu740-c000-ccache
+              - microchip,mpfs-ccache
+
+    then:
+      properties:
+        interrupts:
+          description: |
+            Must contain entries for DirError, DataError, DataFail, DirFail signals.
+          minItems: 4
+
+    else:
+      properties:
+        interrupts:
+          description: |
+            Must contain entries for DirError, DataError and DataFail signals.
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sifive,fu740-c000-ccache
+
+    then:
+      properties:
+        cache-sets:
+          const: 2048
+
+    else:
+      properties:
+        cache-sets:
+          const: 1024
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sifive,ccache0
+
+    then:
+      properties:
+        cache-level:
+          enum: [2, 3]
+
+    else:
+      properties:
+        cache-level:
+          const: 2
+
+additionalProperties: false
+
+required:
+  - compatible
+  - cache-block-size
+  - cache-level
+  - cache-sets
+  - cache-size
+  - cache-unified
+  - interrupts
+  - reg
+
+examples:
+  - |
+    cache-controller@2010000 {
+        compatible = "sifive,fu540-c000-ccache", "cache";
+        cache-block-size = <64>;
+        cache-level = <2>;
+        cache-sets = <1024>;
+        cache-size = <2097152>;
+        cache-unified;
+        reg = <0x2010000 0x1000>;
+        interrupt-parent = <&plic0>;
+        interrupts = <1>,
+                     <2>,
+                     <3>;
+        next-level-cache = <&L25>;
+        memory-region = <&l2_lim>;
+    };
diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.txt b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.txt
deleted file mode 100644
index 73d8f19c3bd9..000000000000
--- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-SiFive L2 Cache Controller
---------------------------
-The SiFive Level 2 Cache Controller is used to provide access to fast copies
-of memory for masters in a Core Complex. The Level 2 Cache Controller also
-acts as directory-based coherency manager.
-All the properties in ePAPR/DeviceTree specification applies for this platform
-
-Required Properties:
---------------------
-- compatible: Should be "sifive,fu540-c000-ccache" and "cache"
-
-- cache-block-size: Specifies the block size in bytes of the cache.
-  Should be 64
-
-- cache-level: Should be set to 2 for a level 2 cache
-
-- cache-sets: Specifies the number of associativity sets of the cache.
-  Should be 1024
-
-- cache-size: Specifies the size in bytes of the cache. Should be 2097152
-
-- cache-unified: Specifies the cache is a unified cache
-
-- interrupts: Must contain 3 entries (DirError, DataError and DataFail signals)
-
-- reg: Physical base address and size of L2 cache controller registers map
-
-Optional Properties:
---------------------
-- next-level-cache: phandle to the next level cache if present.
-
-- memory-region: reference to the reserved-memory for the L2 Loosely Integrated
-  Memory region. The reserved memory node should be defined as per the bindings
-  in reserved-memory.txt
-
-
-Example:
-
-	cache-controller@2010000 {
-		compatible = "sifive,fu540-c000-ccache", "cache";
-		cache-block-size = <64>;
-		cache-level = <2>;
-		cache-sets = <1024>;
-		cache-size = <2097152>;
-		cache-unified;
-		interrupt-parent = <&plic0>;
-		interrupts = <1 2 3>;
-		reg = <0x0 0x2010000 0x0 0x1000>;
-		next-level-cache = <&L25 &L40 &L36>;
-		memory-region = <&l2_lim>;
-	};
diff --git a/Documentation/devicetree/bindings/riscv/sifive.yaml b/Documentation/devicetree/bindings/riscv/sifive.yaml
index 3ab532713dc1..ee0a239af4c2 100644
--- a/Documentation/devicetree/bindings/riscv/sifive.yaml
+++ b/Documentation/devicetree/bindings/riscv/sifive.yaml
@@ -17,9 +17,19 @@ properties:
   $nodename:
     const: '/'
   compatible:
-    items:
-      - enum:
-          - sifive,hifive-unleashed-a00
-      - const: sifive,fu540-c000
-      - const: sifive,fu540
+    oneOf:
+      - items:
+          - enum:
+              - sifive,hifive-unleashed-a00
+          - const: sifive,fu540-c000
+          - const: sifive,fu540
+
+      - items:
+          - enum:
+              - sifive,hifive-unmatched-a00
+          - const: sifive,fu740-c000
+          - const: sifive,fu740
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/riscv/starfive.yaml b/Documentation/devicetree/bindings/riscv/starfive.yaml
new file mode 100644
index 000000000000..5b36243fd674
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/starfive.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/starfive.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive SoC-based boards
+
+maintainers:
+  - Michael Zhu <michael.zhu@starfivetech.com>
+  - Drew Fustini <drew@beagleboard.org>
+
+description:
+  StarFive SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - const: beagle,beaglev-starlight-jh7100-r0
+          - const: starfive,jh7100
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
index a9ff3cb35c5e..09c6c906b1f9 100644
--- a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson Random number generator
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 properties:
   compatible:
@@ -29,6 +29,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     rng@c8834000 {
diff --git a/Documentation/devicetree/bindings/rng/apm,rng.txt b/Documentation/devicetree/bindings/rng/apm,rng.txt
deleted file mode 100644
index 4dde4b06cdd9..000000000000
--- a/Documentation/devicetree/bindings/rng/apm,rng.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-APM X-Gene SoC random number generator.
-
-Required properties:
-
-- compatible  : should be "apm,xgene-rng"
-- reg         : specifies base physical address and size of the registers map
-- clocks      : phandle to clock-controller plus clock-specifier pair
-- interrupts  : specify the fault interrupt for the RNG device
-
-Example:
-
-	rng: rng@10520000 {
-		compatible = "apm,xgene-rng";
-		reg = <0x0 0x10520000 0x0 0x100>;
-		interrupts =   <0x0 0x41 0x4>;
-		clocks = <&rngpkaclk 0>;
-	};
diff --git a/Documentation/devicetree/bindings/rng/apm,x-gene-rng.yaml b/Documentation/devicetree/bindings/rng/apm,x-gene-rng.yaml
new file mode 100644
index 000000000000..02be143cc829
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/apm,x-gene-rng.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/apm,x-gene-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SoC Random Number Generator
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+properties:
+  compatible:
+    const: apm,xgene-rng
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rng@10520000 {
+            compatible = "apm,xgene-rng";
+            reg = <0x0 0x10520000 0x0 0x100>;
+            interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&rngpkaclk 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/rng/arm-cctrng.yaml b/Documentation/devicetree/bindings/rng/arm-cctrng.yaml
new file mode 100644
index 000000000000..c471e4c10558
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/arm-cctrng.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/arm-cctrng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm TrustZone CryptoCell TRNG engine
+
+maintainers:
+  - Hadar Gat <hadar.gat@arm.com>
+
+description: |+
+  Arm TrustZone CryptoCell TRNG (True Random Number Generator) engine.
+
+properties:
+  compatible:
+    enum:
+      - arm,cryptocell-713-trng
+      - arm,cryptocell-703-trng
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  arm,rosc-ratio:
+    description:
+      Arm TrustZone CryptoCell TRNG engine has 4 ring oscillators.
+      Sampling ratio values for these 4 ring oscillators. (from calibration)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 4
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - arm,rosc-ratio
+
+additionalProperties: false
+
+examples:
+  - |
+    arm_cctrng: rng@60000000 {
+        compatible = "arm,cryptocell-713-trng";
+        interrupts = <0 29 4>;
+        reg = <0x60000000 0x10000>;
+        arm,rosc-ratio = <5000 1000 500 0>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml
new file mode 100644
index 000000000000..3ce45456d867
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/atmel,at91-trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel AT91 True Random Number Generator
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,at91sam9g45-trng
+          - microchip,sam9x60-trng
+      - items:
+          - enum:
+              - microchip,sama7g5-trng
+          - const: atmel,at91sam9g45-trng
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rng@fffcc000 {
+        compatible = "atmel,at91sam9g45-trng";
+        reg = <0xfffcc000 0x4000>;
+        interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&trng_clk>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/atmel-trng.txt b/Documentation/devicetree/bindings/rng/atmel-trng.txt
deleted file mode 100644
index 3900ee4f3532..000000000000
--- a/Documentation/devicetree/bindings/rng/atmel-trng.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Atmel TRNG (True Random Number Generator) block
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g45-trng" or "microchip,sam9x60-trng"
-- reg : Offset and length of the register set of this block
-- interrupts : the interrupt number for the TRNG block
-- clocks: should contain the TRNG clk source
-
-Example:
-
-trng@fffcc000 {
-	compatible = "atmel,at91sam9g45-trng";
-	reg = <0xfffcc000 0x4000>;
-	interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
-	clocks = <&trng_clk>;
-};
diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
deleted file mode 100644
index aaac7975f61c..000000000000
--- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-BCM2835/6368 Random number generator
-
-Required properties:
-
-- compatible : should be one of
-	"brcm,bcm2835-rng"
-	"brcm,bcm-nsp-rng"
-	"brcm,bcm5301x-rng" or
-	"brcm,bcm6368-rng"
-- reg : Specifies base physical address and size of the registers.
-
-Optional properties:
-
-- clocks : phandle to clock-controller plus clock-specifier pair
-- clock-names : "ipsec" as a clock name
-
-Optional properties:
-
-- interrupts: specify the interrupt for the RNG block
-
-Example:
-
-rng {
-	compatible = "brcm,bcm2835-rng";
-	reg = <0x7e104000 0x10>;
-	interrupts = <2 29>;
-};
-
-rng@18033000 {
-	compatible = "brcm,bcm-nsp-rng";
-	reg = <0x18033000 0x14>;
-};
-
-random: rng@10004180 {
-	compatible = "brcm,bcm6368-rng";
-	reg = <0x10004180 0x14>;
-
-	clocks = <&periph_clk 18>;
-	clock-names = "ipsec";
-};
diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
new file mode 100644
index 000000000000..6da674666d45
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/brcm,bcm2835.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835/6368 Random number generator
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Herbert Xu <herbert@gondor.apana.org.au>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-rng
+      - brcm,bcm-nsp-rng
+      - brcm,bcm5301x-rng
+      - brcm,bcm6368-rng
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipsec
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: ipsec
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      enum:
+        - brcm,bcm6368-rng
+then:
+  required:
+    - clocks
+    - clock-names
+    - resets
+    - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@7e104000 {
+        compatible = "brcm,bcm2835-rng";
+        reg = <0x7e104000 0x10>;
+        interrupts = <2 29>;
+    };
+
+  - |
+    rng@18033000 {
+        compatible = "brcm,bcm-nsp-rng";
+        reg = <0x18033000 0x14>;
+    };
+
+  - |
+    rng@10004180 {
+        compatible = "brcm,bcm6368-rng";
+        reg = <0x10004180 0x14>;
+
+        clocks = <&periph_clk 18>;
+        clock-names = "ipsec";
+
+        resets = <&periph_rst 4>;
+        reset-names = "ipsec";
+    };
diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt
deleted file mode 100644
index 802523196ee5..000000000000
--- a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-HWRNG support for the iproc-rng200 driver
-
-Required properties:
-- compatible : Must be one of:
-	       "brcm,bcm2711-rng200"
-	       "brcm,bcm7211-rng200"
-	       "brcm,bcm7278-rng200"
-	       "brcm,iproc-rng200"
-- reg : base address and size of control register block
-
-Example:
-
-rng {
-        compatible = "brcm,iproc-rng200";
-        reg = <0x18032000 0x28>;
-};
diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml
new file mode 100644
index 000000000000..a00e9bc8b609
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/rng/brcm,iproc-rng200.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: HWRNG support for the iproc-rng200 driver
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-rng200
+      - brcm,bcm7211-rng200
+      - brcm,bcm7278-rng200
+      - brcm,iproc-rng200
+
+  reg:
+    maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@18032000 {
+        compatible = "brcm,iproc-rng200";
+        reg = <0x18032000 0x28>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/imx-rng.txt b/Documentation/devicetree/bindings/rng/imx-rng.txt
deleted file mode 100644
index 405c2b00ccb0..000000000000
--- a/Documentation/devicetree/bindings/rng/imx-rng.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Freescale RNGA/RNGB/RNGC (Random Number Generator Versions A, B and C)
-
-Required properties:
-- compatible : should be one of
-               "fsl,imx21-rnga"
-               "fsl,imx31-rnga" (backward compatible with "fsl,imx21-rnga")
-               "fsl,imx25-rngb"
-               "fsl,imx35-rngc"
-- reg : offset and length of the register set of this block
-- interrupts : the interrupt number for the RNG block
-- clocks : the RNG clk source
-
-Example:
-
-rng@53fb0000 {
-	compatible = "fsl,imx25-rngb";
-	reg = <0x53fb0000 0x4000>;
-	interrupts = <22>;
-	clocks = <&trng_clk>;
-};
diff --git a/Documentation/devicetree/bindings/rng/imx-rng.yaml b/Documentation/devicetree/bindings/rng/imx-rng.yaml
new file mode 100644
index 000000000000..07f6ff89bcc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/imx-rng.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/imx-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale RNGA/RNGB/RNGC (Random Number Generator Versions A, B and C)
+
+maintainers:
+  - Vladimir Zapolskiy <vz@mleia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx21-rnga
+      - const: fsl,imx25-rngb
+      - items:
+          - const: fsl,imx31-rnga
+          - const: fsl,imx21-rnga
+      - items:
+          - enum:
+              - fsl,imx6sl-rngb
+              - fsl,imx6sll-rngb
+              - fsl,imx6ull-rngb
+          - const: fsl,imx25-rngb
+      - const: fsl,imx35-rngc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    rngb@53fb0000 {
+        compatible = "fsl,imx25-rngb";
+        reg = <0x53fb0000 0x4000>;
+        clocks = <&clks 109>;
+        interrupts = <22>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/ingenic,rng.yaml b/Documentation/devicetree/bindings/rng/ingenic,rng.yaml
new file mode 100644
index 000000000000..b2e4a6a7f93a
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/ingenic,rng.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/ingenic,rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for RNG in Ingenic SoCs
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+  The Random Number Generator in Ingenic SoCs.
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4780-rng
+      - ingenic,x1000-rng
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng: rng@d8 {
+        compatible = "ingenic,jz4780-rng";
+        reg = <0xd8 0x8>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rng/ingenic,trng.yaml b/Documentation/devicetree/bindings/rng/ingenic,trng.yaml
new file mode 100644
index 000000000000..044d9a065650
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/ingenic,trng.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/ingenic,trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for DTRNG in Ingenic SoCs
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+  The True Random Number Generator in Ingenic SoCs.
+
+properties:
+  compatible:
+    enum:
+      - ingenic,x1830-dtrng
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,x1830-cgu.h>
+
+    dtrng: trng@10072000 {
+        compatible = "ingenic,x1830-dtrng";
+        reg = <0x10072000 0xc>;
+
+        clocks = <&cgu X1830_CLK_DTRNG>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
new file mode 100644
index 000000000000..067e71e8ebe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/intel,ixp46x-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP46x RNG bindings
+
+description: |
+  The Intel IXP46x has a random number generator at a fixed physical
+  location in memory. Each read is guaranteed to provide a unique
+  32 bit random number.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: intel,ixp46x-rng
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@70002100 {
+      compatible = "intel,ixp46x-rng";
+      reg = <0x70002100 4>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/ks-sa-rng.txt b/Documentation/devicetree/bindings/rng/ks-sa-rng.txt
deleted file mode 100644
index b7a65b487901..000000000000
--- a/Documentation/devicetree/bindings/rng/ks-sa-rng.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Keystone SoC Hardware Random Number Generator(HWRNG) Module
-
-On Keystone SoCs HWRNG module is a submodule of the Security Accelerator.
-
-- compatible: should be "ti,keystone-rng"
-- ti,syscon-sa-cfg: phandle to syscon node of the SA configuration registers.
-		    This registers are shared between hwrng and crypto drivers.
-- clocks: phandle to the reference clocks for the subsystem
-- clock-names: functional clock name. Should be set to "fck"
-- reg: HWRNG module register space
-
-Example:
-/* K2HK */
-
-rng@24000 {
-	compatible = "ti,keystone-rng";
-	ti,syscon-sa-cfg = <&sa_config>;
-	clocks = <&clksa>;
-	clock-names = "fck";
-	reg = <0x24000 0x1000>;
-};
diff --git a/Documentation/devicetree/bindings/rng/mtk-rng.txt b/Documentation/devicetree/bindings/rng/mtk-rng.txt
deleted file mode 100644
index dfdcb5cd2ea8..000000000000
--- a/Documentation/devicetree/bindings/rng/mtk-rng.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Device-Tree bindings for Mediatek random number generator
-found in MediaTek SoC family
-
-Required properties:
-- compatible	    : Should be
-			"mediatek,mt7622-rng", 	"mediatek,mt7623-rng" : for MT7622
-			"mediatek,mt7629-rng",  "mediatek,mt7623-rng" : for MT7629
-			"mediatek,mt7623-rng" : for MT7623
-			"mediatek,mt8516-rng", "mediatek,mt7623-rng" : for MT8516
-- clocks	    : list of clock specifiers, corresponding to
-		      entries in clock-names property;
-- clock-names	    : Should contain "rng" entries;
-- reg 		    : Specifies base physical address and size of the registers
-
-Example:
-
-rng: rng@1020f000 {
-	compatible = "mediatek,mt7623-rng";
-	reg = <0 0x1020f000 0 0x1000>;
-	clocks = <&infracfg CLK_INFRA_TRNG>;
-	clock-names = "rng";
-};
diff --git a/Documentation/devicetree/bindings/rng/mtk-rng.yaml b/Documentation/devicetree/bindings/rng/mtk-rng.yaml
new file mode 100644
index 000000000000..bb32491ee8ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/mtk-rng.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/rng/mtk-rng.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Random number generator
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+properties:
+  $nodename:
+    pattern: "^rng@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt7623-rng
+      - items:
+          - enum:
+              - mediatek,mt7622-rng
+              - mediatek,mt7629-rng
+              - mediatek,mt7986-rng
+              - mediatek,mt8365-rng
+              - mediatek,mt8516-rng
+          - const: mediatek,mt7623-rng
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rng
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    rng: rng@1020f000 {
+            compatible = "mediatek,mt7623-rng";
+            reg = <0x1020f000 0x1000>;
+            clocks = <&infracfg CLK_INFRA_TRNG>;
+            clock-names = "rng";
+    };
diff --git a/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.txt b/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.txt
deleted file mode 100644
index 65c04172fc8c..000000000000
--- a/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-NPCM SoC Random Number Generator
-
-Required properties:
-- compatible  : "nuvoton,npcm750-rng" for the NPCM7XX BMC.
-- reg         : Specifies physical base address and size of the registers.
-
-Example:
-
-rng: rng@f000b000 {
-	compatible = "nuvoton,npcm750-rng";
-	reg = <0xf000b000 0x8>;
-};
diff --git a/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.yaml b/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.yaml
new file mode 100644
index 000000000000..abd134c9d400
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/nuvoton,npcm-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM SoC Random Number Generator
+
+maintainers:
+  - Avi Fishman <avifishman70@gmail.com>
+  - Tomer Maimon <tmaimon77@gmail.com>
+  - Tali Perry <tali.perry1@gmail.com>
+  - Patrick Venture <venture@google.com>
+  - Nancy Yuen <yuenn@google.com>
+  - Benjamin Fair <benjaminfair@google.com>
+
+properties:
+  compatible:
+    const: nuvoton,npcm750-rng
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@f000b000 {
+        compatible = "nuvoton,npcm750-rng";
+        reg = <0xf000b000 0x8>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt b/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
deleted file mode 100644
index f315c9723bd2..000000000000
--- a/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-OMAP ROM RNG driver binding
-
-Secure SoCs may provide RNG via secure ROM calls like Nokia N900 does. The
-implementation can depend on the SoC secure ROM used.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "nokia,n900-rom-rng"
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the the RNG interface clock
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "ick"
-
-Example:
-
-	rom_rng: rng {
-		compatible = "nokia,n900-rom-rng";
-		clocks = <&rng_ick>;
-		clock-names = "ick";
-	};
diff --git a/Documentation/devicetree/bindings/rng/omap_rng.txt b/Documentation/devicetree/bindings/rng/omap_rng.txt
deleted file mode 100644
index ea434ce50f36..000000000000
--- a/Documentation/devicetree/bindings/rng/omap_rng.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-OMAP SoC and Inside-Secure HWRNG Module
-
-Required properties:
-
-- compatible : Should contain entries for this and backward compatible
-  RNG versions:
-  - "ti,omap2-rng" for OMAP2.
-  - "ti,omap4-rng" for OMAP4, OMAP5 and AM33XX.
-  - "inside-secure,safexcel-eip76" for SoCs with EIP76 IP block
-  Note that these two versions are incompatible.
-- ti,hwmods: Name of the hwmod associated with the RNG module
-- reg : Offset and length of the register set for the module
-- interrupts : the interrupt number for the RNG module.
-		Used for "ti,omap4-rng" and "inside-secure,safexcel-eip76"
-- clocks: the trng clock source. Only mandatory for the
-  "inside-secure,safexcel-eip76" compatible, the second clock is
-  needed for the Armada 7K/8K SoCs
-- clock-names: mandatory if there is a second clock, in this case the
-  name must be "core" for the first clock and "reg" for the second
-  one
-
-
-Example:
-/* AM335x */
-rng: rng@48310000 {
-	compatible = "ti,omap4-rng";
-	ti,hwmods = "rng";
-	reg = <0x48310000 0x2000>;
-	interrupts = <111>;
-};
-
-/* SafeXcel IP-76 */
-trng: rng@f2760000 {
-	compatible = "inside-secure,safexcel-eip76";
-	reg = <0xf2760000 0x7d>;
-	interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&cpm_syscon0 1 25>;
-};
diff --git a/Documentation/devicetree/bindings/rng/omap_rng.yaml b/Documentation/devicetree/bindings/rng/omap_rng.yaml
new file mode 100644
index 000000000000..ccf54fae8302
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/omap_rng.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/omap_rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP SoC and Inside-Secure HWRNG Module
+
+maintainers:
+  - Jayesh Choudhary <j-choudhary@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,omap2-rng
+      - ti,omap4-rng
+      - inside-secure,safexcel-eip76
+
+  ti,hwmods:
+    const: rng
+    deprecated: true
+    description: Name of the hwmod associated with the RNG module
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: EIP150 gatable clock
+      - description: Main gatable clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: reg
+
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,omap4-rng
+              - inside-secure,safexcel-eip76
+
+    then:
+      required:
+        - interrupts
+
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    /* AM335x */
+    rng: rng@48310000 {
+            compatible = "ti,omap4-rng";
+            ti,hwmods = "rng";
+            reg = <0x48310000 0x2000>;
+            interrupts = <111>;
+    };
+  - |
+    /* SafeXcel IP-76 */
+    trng: rng@f2760000 {
+            compatible = "inside-secure,safexcel-eip76";
+            reg = <0xf2760000 0x7d>;
+            interrupts = <0 59 4>;
+            clocks = <&cpm_syscon0 1 25>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.txt b/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.txt
deleted file mode 100644
index 5a613a4ec780..000000000000
--- a/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Exynos True Random Number Generator
-
-Required properties:
-
-- compatible  : Should be "samsung,exynos5250-trng".
-- reg         : Specifies base physical address and size of the registers map.
-- clocks      : Phandle to clock-controller plus clock-specifier pair.
-- clock-names : "secss" as a clock name.
-
-Example:
-
-	rng@10830600 {
-		compatible = "samsung,exynos5250-trng";
-		reg = <0x10830600 0x100>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
diff --git a/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml b/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml
new file mode 100644
index 000000000000..765d9f9edd6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/samsung,exynos5250-trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC True Random Number Generator
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Łukasz Stelmach <l.stelmach@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,exynos5250-trng
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: secss
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+
+    rng@10830600 {
+        compatible = "samsung,exynos5250-trng";
+        reg = <0x10830600 0x100>;
+        clocks = <&clock CLK_SSS>;
+        clock-names = "secss";
+    };
diff --git a/Documentation/devicetree/bindings/rng/silex-insight,ba431-rng.yaml b/Documentation/devicetree/bindings/rng/silex-insight,ba431-rng.yaml
new file mode 100644
index 000000000000..48ab82abf50e
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/silex-insight,ba431-rng.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/silex-insight,ba431-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silex Insight BA431 RNG bindings
+
+description: |
+  The BA431 hardware random number generator is an IP that is FIPS-140-2/3
+  certified.
+
+maintainers:
+  - Olivier Sobrie <olivier.sobrie@silexinsight.com>
+
+properties:
+  compatible:
+    const: silex-insight,ba431-rng
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@42800000 {
+      compatible = "silex-insight,ba431-rng";
+      reg = <0x42800000 0x1000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rng/st,rng.txt b/Documentation/devicetree/bindings/rng/st,rng.txt
deleted file mode 100644
index 35734bc282e9..000000000000
--- a/Documentation/devicetree/bindings/rng/st,rng.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-STMicroelectronics HW Random Number Generator
-----------------------------------------------
-
-Required parameters:
-compatible	: Should be "st,rng"
-reg		: Base address and size of IP's register map.
-clocks		: Phandle to device's clock (See: ../clocks/clock-bindings.txt)
-
-Example:
-
-rng@fee80000 {
-	compatible      = "st,rng";
-	reg		= <0xfee80000 0x1000>;
-	clocks          = <&clk_sysin>;
-}
diff --git a/Documentation/devicetree/bindings/rng/st,rng.yaml b/Documentation/devicetree/bindings/rng/st,rng.yaml
new file mode 100644
index 000000000000..ff1211ef9046
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/st,rng.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/st,rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics Hardware Random Number Generator
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+properties:
+  compatible:
+    const: st,rng
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@fee80000 {
+        compatible = "st,rng";
+        reg = <0xfee80000 0x1000>;
+        clocks = <&clk_sysin>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
index 82bb2e97e889..fcd86f822a9c 100644
--- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
@@ -11,7 +11,7 @@ description: |
   IP and is fully separated from other crypto functions.
 
 maintainers:
-  - Lionel Debieve <lionel.debieve@st.com>
+  - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
@@ -27,6 +27,7 @@ properties:
     maxItems: 1
 
   clock-error-detect:
+    type: boolean
     description: If set enable the clock detection management
 
 required:
diff --git a/Documentation/devicetree/bindings/rng/ti,keystone-rng.yaml b/Documentation/devicetree/bindings/rng/ti,keystone-rng.yaml
new file mode 100644
index 000000000000..e749818fc193
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/ti,keystone-rng.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/ti,keystone-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keystone SoC Hardware Random Number Generator
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+  - Santosh Shilimkar <ssantosh@kernel.org>
+
+properties:
+  compatible:
+    const: ti,keystone-rng
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+
+  reg:
+    maxItems: 1
+
+  ti,syscon-sa-cfg:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: |
+      Phandle to syscon node of the SA configuration registers.  These
+      registers are shared between HWRNG and crypto drivers.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - ti,syscon-sa-cfg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@24000 {
+        compatible = "ti,keystone-rng";
+        ti,syscon-sa-cfg = <&sa_config>;
+        clocks = <&clksa>;
+        clock-names = "fck";
+        reg = <0x24000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/ti,omap-rom-rng.yaml b/Documentation/devicetree/bindings/rng/ti,omap-rom-rng.yaml
new file mode 100644
index 000000000000..9a58440b1ab1
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/ti,omap-rom-rng.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/ti,omap-rom-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP ROM Random Number Generator
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  Secure SoCs may provide RNG via secure ROM calls like Nokia N900 does.
+  The implementation can depend on the SoC secure ROM used.
+
+properties:
+  compatible:
+    const: nokia,n900-rom-rng
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ick
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rng {
+        compatible = "nokia,n900-rom-rng";
+        clocks = <&rng_ick>;
+        clock-names = "ick";
+    };
diff --git a/Documentation/devicetree/bindings/rng/timeriomem_rng.txt b/Documentation/devicetree/bindings/rng/timeriomem_rng.txt
deleted file mode 100644
index fb4846160047..000000000000
--- a/Documentation/devicetree/bindings/rng/timeriomem_rng.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-HWRNG support for the timeriomem_rng driver
-
-Required properties:
-- compatible : "timeriomem_rng"
-- reg : base address to sample from
-- period : wait time in microseconds to use between samples
-
-Optional properties:
-- quality : estimated number of bits of true entropy per 1024 bits read from the
-            rng.  Defaults to zero which causes the kernel's default quality to
-            be used instead.  Note that the default quality is usually zero
-            which disables using this rng to automatically fill the kernel's
-            entropy pool.
-
-N.B. currently 'reg' must be at least four bytes wide and 32-bit aligned
-
-Example:
-
-hwrng@44 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "timeriomem_rng";
-	reg = <0x44 0x04>;
-	period = <1000000>;
-};
diff --git a/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml b/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml
new file mode 100644
index 000000000000..4754174e9849
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/timeriomem_rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TimerIO Random Number Generator
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: timeriomem_rng
+
+  period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: wait time in microseconds to use between samples
+
+  quality:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Estimated number of bits of true entropy per 1024 bits read from the rng.
+      Defaults to zero which causes the kernel's default quality to be used
+      instead.  Note that the default quality is usually zero which disables
+      using this rng to automatically fill the kernel's entropy pool.
+
+  reg:
+    maxItems: 1
+    description:
+      Base address to sample from. Currently 'reg' must be at least four bytes
+      wide and 32-bit aligned.
+
+required:
+  - compatible
+  - period
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@44 {
+        compatible = "timeriomem_rng";
+        reg = <0x44 0x04>;
+        period = <1000000>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/xiphera,xip8001b-trng.yaml b/Documentation/devicetree/bindings/rng/xiphera,xip8001b-trng.yaml
new file mode 100644
index 000000000000..1e17e55762f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/xiphera,xip8001b-trng.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/xiphera,xip8001b-trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xiphera XIP8001B-trng bindings
+
+maintainers:
+  - Atte Tommiska <atte.tommiska@xiphera.com>
+
+description: |
+  Xiphera FPGA-based true random number generator intellectual property core.
+
+properties:
+  compatible:
+    const: xiphera,xip8001b-trng
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@43c00000 {
+        compatible = "xiphera,xip8001b-trng";
+        reg = <0x43c00000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml
index 478b0234e8fa..dede49431733 100644
--- a/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/allwinner,sun4i-a10-rtc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 RTC Device Tree Bindings
+title: Allwinner A10 RTC
 
 allOf:
   - $ref: "rtc.yaml#"
diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
index 37c2a601c3fa..04947e166cef 100644
--- a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/allwinner,sun6i-a31-rtc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 RTC Device Tree Bindings
+title: Allwinner A31 RTC
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -16,29 +16,39 @@ properties:
 
   compatible:
     oneOf:
-      - const: allwinner,sun6i-a31-rtc
-      - const: allwinner,sun8i-a23-rtc
-      - const: allwinner,sun8i-h3-rtc
-      - const: allwinner,sun8i-r40-rtc
-      - const: allwinner,sun8i-v3-rtc
-      - const: allwinner,sun50i-h5-rtc
+      - enum:
+          - allwinner,sun6i-a31-rtc
+          - allwinner,sun8i-a23-rtc
+          - allwinner,sun8i-h3-rtc
+          - allwinner,sun8i-r40-rtc
+          - allwinner,sun8i-v3-rtc
+          - allwinner,sun50i-h5-rtc
+          - allwinner,sun50i-h6-rtc
+          - allwinner,sun50i-h616-rtc
+          - allwinner,sun50i-r329-rtc
       - items:
           - const: allwinner,sun50i-a64-rtc
           - const: allwinner,sun8i-h3-rtc
-      - const: allwinner,sun50i-h6-rtc
+      - items:
+          - const: allwinner,sun20i-d1-rtc
+          - const: allwinner,sun50i-r329-rtc
 
   reg:
     maxItems: 1
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: RTC Alarm 0
       - description: RTC Alarm 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
 
   clock-output-names:
     minItems: 1
@@ -61,7 +71,6 @@ allOf:
     then:
       properties:
         clock-output-names:
-          minItems: 1
           maxItems: 1
 
   - if:
@@ -86,50 +95,89 @@ allOf:
             enum:
               - allwinner,sun8i-h3-rtc
               - allwinner,sun50i-h5-rtc
+              - allwinner,sun50i-h6-rtc
 
     then:
       properties:
         clock-output-names:
           minItems: 3
-          maxItems: 3
 
   - if:
       properties:
         compatible:
           contains:
-            const: allwinner,sun50i-h6-rtc
+            const: allwinner,sun50i-h616-rtc
 
     then:
       properties:
-        clock-output-names:
+        clocks:
+          items:
+            - description: Bus clock for register access
+            - description: 24 MHz oscillator
+            - description: 32 kHz clock from the CCU
+
+        clock-names:
+          items:
+            - const: bus
+            - const: hosc
+            - const: pll-32k
+
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-r329-rtc
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: Bus clock for register access
+            - description: 24 MHz oscillator
+            - description: AHB parent for internal SPI clock
+            - description: External 32768 Hz oscillator
+
+        clock-names:
           minItems: 3
-          maxItems: 3
+          items:
+            - const: bus
+            - const: hosc
+            - const: ahb
+            - const: ext-osc32k
+
+      required:
+        - clocks
+        - clock-names
 
   - if:
       properties:
         compatible:
           contains:
-            const: allwinner,sun8i-r40-rtc
+            enum:
+              - allwinner,sun8i-r40-rtc
+              - allwinner,sun50i-h616-rtc
+              - allwinner,sun50i-r329-rtc
 
     then:
       properties:
         interrupts:
-          minItems: 1
           maxItems: 1
 
     else:
       properties:
         interrupts:
           minItems: 2
-          maxItems: 2
 
 required:
   - "#clock-cells"
   - compatible
   - reg
   - interrupts
-  - clocks
-  - clock-output-names
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/rtc/arm,pl031.yaml b/Documentation/devicetree/bindings/rtc/arm,pl031.yaml
new file mode 100644
index 000000000000..fa5f2eda372e
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/arm,pl031.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/arm,pl031.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Primecell PL031 Real Time Clock
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl031
+  required:
+    - compatible
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl031
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  start-year: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc@10017000 {
+        compatible = "arm,pl031", "arm,primecell";
+        reg = <0x10017000 0x1000>;
+        clocks = <&pclk>;
+        clock-names = "apb_pclk";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
index 02bbfe726c62..0e5f0fcc26b0 100644
--- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/atmel,at91rm9200-rtc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Atmel AT91 RTC Device Tree Bindings
+title: Atmel AT91 RTC
 
 allOf:
   - $ref: "rtc.yaml#"
@@ -20,6 +20,7 @@ properties:
       - atmel,sama5d4-rtc
       - atmel,sama5d2-rtc
       - microchip,sam9x60-rtc
+      - microchip,sama7g5-rtc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
deleted file mode 100644
index 6ae79d1843f3..000000000000
--- a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Atmel AT91SAM9260 Real Time Timer
-
-Required properties:
-- compatible: should be: "atmel,at91sam9260-rtt"
-- reg: should encode the memory region of the RTT controller
-- interrupts: rtt alarm/event interrupt
-- clocks: should contain the 32 KHz slow clk that will drive the RTT block.
-- atmel,rtt-rtc-time-reg: should encode the GPBR register used to store
-	the time base when the RTT is used as an RTC.
-	The first cell should point to the GPBR node and the second one
-	encode the offset within the GPBR block (or in other words, the
-	GPBR register used to store the time base).
-
-
-Example:
-
-rtt@fffffd20 {
-	compatible = "atmel,at91sam9260-rtt";
-	reg = <0xfffffd20 0x10>;
-	interrupts = <1 4 7>;
-	clocks = <&clk32k>;
-	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml b/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml
new file mode 100644
index 000000000000..b5cd20e89daf
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/atmel,at91sam9260-rtt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel AT91 RTT
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: atmel,at91sam9260-rtt
+      - items:
+          - const: microchip,sam9x60-rtt
+          - const: atmel,at91sam9260-rtt
+      - items:
+          - const: microchip,sama7g5-rtt
+          - const: microchip,sam9x60-rtt
+          - const: atmel,at91sam9260-rtt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  atmel,rtt-rtc-time-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the GPBR node.
+          - description: Offset within the GPBR block.
+    description:
+      Should encode the GPBR register used to store the time base when the
+      RTT is used as an RTC. The first cell should point to the GPBR node
+      and the second one encodes the offset within the GPBR block (or in
+      other words, the GPBR register used to store the time base).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - atmel,rtt-rtc-time-reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc@fffffd20 {
+        compatible = "atmel,at91sam9260-rtt";
+        reg = <0xfffffd20 0x10>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+        clocks = <&clk32k>;
+        atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
deleted file mode 100644
index d946f28502b3..000000000000
--- a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Broadcom STB wake-up Timer
-
-The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the
-ability to wake up the system from low-power suspend/standby modes.
-
-Required properties:
-- compatible     : should contain "brcm,brcmstb-waketimer"
-- reg            : the register start and length for the WKTMR block
-- interrupts     : The TIMER interrupt
-- clocks	 : The phandle to the UPG fixed clock (27Mhz domain)
-
-Example:
-
-waketimer@f0411580 {
-	compatible = "brcm,brcmstb-waketimer";
-	reg = <0xf0411580 0x14>;
-	interrupts = <0x3>;
-	interrupt-parent = <&aon_pm_l2_intc>;
-	clocks = <&upg_fixed>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.yaml b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.yaml
new file mode 100644
index 000000000000..9fe079917a98
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/brcm,brcmstb-waketimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB wake-up Timer
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description:
+  The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the
+  ability to wake up the system from low-power suspend/standby modes.
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+properties:
+  compatible:
+    const: brcm,brcmstb-waketimer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: the TIMER interrupt
+    maxItems: 1
+
+  clocks:
+    description: clock reference in the 27MHz domain
+    maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc@f0411580 {
+        compatible = "brcm,brcmstb-waketimer";
+        reg = <0xf0411580 0x14>;
+        interrupts = <0x3>;
+        interrupt-parent = <&aon_pm_l2_intc>;
+        clocks = <&upg_fixed>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/dw-apb.txt b/Documentation/devicetree/bindings/rtc/dw-apb.txt
deleted file mode 100644
index c703d51abb6c..000000000000
--- a/Documentation/devicetree/bindings/rtc/dw-apb.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Designware APB timer
-
-Required properties:
-- compatible: One of:
- 	"snps,dw-apb-timer"
-	"snps,dw-apb-timer-sp" <DEPRECATED>
-	"snps,dw-apb-timer-osc" <DEPRECATED>
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: IRQ line for the timer.
-- either clocks+clock-names or clock-frequency properties
-
-Optional properties:
-- clocks	: list of clock specifiers, corresponding to entries in
-		  the clock-names property;
-- clock-names	: should contain "timer" and "pclk" entries, matching entries
-		  in the clocks property.
-- clock-frequency: The frequency in HZ of the timer.
-- clock-freq: For backwards compatibility with picoxcell
-
-If using the clock specifiers, the pclk clock is optional, as not all
-systems may use one.
-
-
-Example:
-	timer@ffe00000 {
-		compatible = "snps,dw-apb-timer";
-		interrupts = <0 170 4>;
-		reg = <0xffe00000 0x1000>;
-		clocks = <&timer_clk>, <&timer_pclk>;
-		clock-names = "timer", "pclk";
-	};
diff --git a/Documentation/devicetree/bindings/rtc/epson,rx8900.txt b/Documentation/devicetree/bindings/rtc/epson,rx8900.txt
deleted file mode 100644
index 3f61e516ecf6..000000000000
--- a/Documentation/devicetree/bindings/rtc/epson,rx8900.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Real Time Clock driver for:
-  - Epson RX8900
-  - Micro Crystal rv8803
-
-Required properties:
-- compatible: should be: "microcrystal,rv8803" or "epson,rx8900"
-- reg : the I2C address of the device for I2C
-
-Optional properties:
-- epson,vdet-disable : boolean, if present will disable voltage detector.
-  Should be set if no backup battery is used.
-- trickle-diode-disable : boolean, if present will disable internal trickle
-  charger diode
-
-Example:
-
-	rtc: rtc@32 {
-		compatible = "epson,rx8900"
-		reg = <0x32>;
-		epson,vdet-disable;
-		trickle-diode-disable;
-	};
diff --git a/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml b/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml
new file mode 100644
index 000000000000..d12855e7ffd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/epson,rx8900.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EPSON RX8900 / Microcrystal RV8803 Real-Time Clock DT bindings
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - epson,rx8804
+      - epson,rx8900
+      - microcrystal,rv8803
+
+  reg:
+    maxItems: 1
+
+  epson,vdet-disable:
+    type: boolean
+    description: |
+      Disable voltage detector. Should be set if no backup battery is used.
+
+  trickle-diode-disable: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@32 {
+            compatible = "epson,rx8900";
+            reg = <0x32>;
+            epson,vdet-disable;
+            trickle-diode-disable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt
deleted file mode 100644
index e3938f5e0b6c..000000000000
--- a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Faraday Technology FTRTC010 Real Time Clock
-
-This RTC appears in for example the Storlink Gemini family of
-SoCs.
-
-Required properties:
-- compatible : Should be one of:
-  "faraday,ftrtc010"
-  "cortina,gemini-rtc", "faraday,ftrtc010"
-
-Optional properties:
-- clocks: when present should contain clock references to the
-  PCLK and EXTCLK clocks. Faraday calls the later CLK1HZ and
-  says the clock should be 1 Hz, but implementers actually seem
-  to choose different clocks here, like Cortina who chose
-  32768 Hz (a typical low-power clock).
-- clock-names: should name the clocks "PCLK" and "EXTCLK"
-  respectively.
-
-Examples:
-
-rtc@45000000 {
-	compatible = "cortina,gemini-rtc";
-	reg = <0x45000000 0x100>;
-	interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&foo 0>, <&foo 1>;
-	clock-names = "PCLK", "EXTCLK";
-};
diff --git a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml
new file mode 100644
index 000000000000..056d42daae06
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/faraday,ftrtc010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTRTC010 Real Time Clock
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This RTC appears in for example the Storlink Gemini family of SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,ftrtc010
+      - items:
+          - const: cortina,gemini-rtc
+          - const: faraday,ftrtc010
+
+  resets:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PCLK clocks
+      - description: EXTCLK clocks. Faraday calls it CLK1HZ and says the clock
+          should be 1 Hz, but implementers actually seem to choose different
+          clocks here, like Cortina who chose 32768 Hz (a typical low-power clock).
+
+  clock-names:
+    items:
+      - const: "PCLK"
+      - const: "EXTCLK"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    rtc@45000000 {
+      compatible = "cortina,gemini-rtc", "faraday,ftrtc010";
+      reg = <0x45000000 0x100>;
+      interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&foo 0>, <&foo 1>;
+      clock-names = "PCLK", "EXTCLK";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml b/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml
new file mode 100644
index 000000000000..8c102b70d735
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/fsl,scu-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - RTC bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-sc-rtc
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc {
+        compatible = "fsl,imx8qxp-sc-rtc";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt b/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt
deleted file mode 100644
index c797bc9d77d2..000000000000
--- a/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* i.MX25 Real Time Clock controller
-
-Required properties:
-- compatible: should be: "fsl,imx25-rtc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- clocks: should contain the phandle for the rtc clock
-- interrupts: rtc alarm interrupt
-
-Optional properties:
-- interrupts: dryice security violation interrupt (second entry)
-
-Example:
-
-rtc@53ffc000 {
-	compatible = "fsl,imx25-rtc";
-	reg = <0x53ffc000 0x4000>;
-	clocks = <&clks 81>;
-	interrupts = <25 56>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml b/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml
new file mode 100644
index 000000000000..4807c95a663c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/imxdi-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX25 Real Time Clock controller
+
+maintainers:
+  - Roland Stigge <stigge@antcom.de>
+
+properties:
+  compatible:
+    const: fsl,imx25-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: rtc alarm interrupt
+      - description: dryice security violation interrupt
+    minItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc@53ffc000 {
+        compatible = "fsl,imx25-rtc";
+        reg = <0x53ffc000 0x4000>;
+        clocks = <&clks 81>;
+        interrupts = <25>, <56>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
deleted file mode 100644
index 41c7ae18fd7b..000000000000
--- a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-JZ4740 and similar SoCs real-time clock driver
-
-Required properties:
-
-- compatible: One of:
-  - "ingenic,jz4740-rtc" - for use with the JZ4740 SoC
-  - "ingenic,jz4780-rtc" - for use with the JZ4780 SoC
-- reg: Address range of rtc register set
-- interrupts: IRQ number for the alarm interrupt
-- clocks: phandle to the "rtc" clock
-- clock-names: must be "rtc"
-
-Optional properties:
-- system-power-controller: To use this component as the
-  system power controller
-- reset-pin-assert-time-ms: Reset pin low-level assertion
-  time after wakeup (default 60ms; range 0-125ms if RTC clock
-  at 32 kHz)
-- min-wakeup-pin-assert-time-ms: Minimum wakeup pin assertion
-  time (default 100ms; range 0-2s if RTC clock at 32 kHz)
-
-Example:
-
-rtc@10003000 {
-	compatible = "ingenic,jz4740-rtc";
-	reg = <0x10003000 0x40>;
-
-	interrupt-parent = <&intc>;
-	interrupts = <32>;
-
-	clocks = <&rtc_clock>;
-	clock-names = "rtc";
-
-	system-power-controller;
-	reset-pin-assert-time-ms = <60>;
-	min-wakeup-pin-assert-time-ms = <100>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
new file mode 100644
index 000000000000..b235b2441997
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/ingenic,rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs Real-Time Clock DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-rtc
+          - ingenic,jz4760-rtc
+      - items:
+          - const: ingenic,jz4725b-rtc
+          - const: ingenic,jz4740-rtc
+      - items:
+          - enum:
+              - ingenic,jz4770-rtc
+              - ingenic,jz4780-rtc
+          - const: ingenic,jz4760-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: rtc
+
+  system-power-controller:
+    description: |
+      Indicates that the RTC is responsible for powering OFF
+      the system.
+    type: boolean
+
+  ingenic,reset-pin-assert-time-ms:
+    minimum: 0
+    maximum: 125
+    default: 60
+    description: |
+      Reset pin low-level assertion time after wakeup
+      (assuming RTC clock at 32 kHz)
+
+  ingenic,min-wakeup-pin-assert-time-ms:
+    minimum: 0
+    maximum: 2000
+    default: 100
+    description: |
+      Minimum wakeup pin assertion time
+      (assuming RTC clock at 32 kHz)
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+    rtc_dev: rtc@10003000 {
+      compatible = "ingenic,jz4740-rtc";
+      reg = <0x10003000 0x40>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <15>;
+
+      clocks = <&cgu JZ4740_CLK_RTC>;
+      clock-names = "rtc";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
new file mode 100644
index 000000000000..7742465b9383
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/microchip,mfps-rtc.yaml#
+
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Soc (MPFS) RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+  - Lewis Hanly <lewis.hanly@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpfs-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: |
+          RTC_WAKEUP interrupt
+      - description: |
+          RTC_MATCH, asserted when the content of the Alarm register is equal
+          to that of the RTC's count register.
+
+  clocks:
+    items:
+      - description: |
+          AHB clock
+      - description: |
+          Reference clock: divided by the prescaler to create a time-based
+          strobe (typically 1 Hz) for the calendar counter. By default, the rtc
+          on the PolarFire SoC shares it's reference with MTIMER so this will
+          be a 1 MHz clock.
+
+  clock-names:
+    items:
+      - const: rtc
+      - const: rtcref
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    rtc@20124000 {
+        compatible = "microchip,mpfs-rtc";
+        reg = <0x20124000 0x1000>;
+        clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>;
+        clock-names = "rtc", "rtcref";
+        interrupts = <80>, <81>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
new file mode 100644
index 000000000000..dd6eebf06ea6
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/microcrystal,rv3032.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip RV-3032 RTC
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    const: microcrystal,rv3032
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  start-year: true
+
+  trickle-resistor-ohms:
+    enum:
+      - 1000
+      - 2000
+      - 7000
+      - 11000
+
+  trickle-voltage-millivolt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1750
+      - 3000
+      - 4400
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+            compatible = "microcrystal,rv3032";
+            reg = <0x51>;
+            pinctrl-0 = <&rtc_nint_pins>;
+            interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
+            trickle-resistor-ohms = <7000>;
+            trickle-voltage-millivolt = <1750>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml b/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
new file mode 100644
index 000000000000..585c185d1eb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/mstar,msc313-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mstar MSC313e RTC
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Daniel Palmer <daniel@0x0f.com>
+  - Romain Perier <romain.perier@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mstar,msc313-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  start-year: true
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    rtc@2400 {
+        compatible = "mstar,msc313-rtc";
+        reg = <0x2400 0x40>;
+        clocks = <&xtal_div2>;
+        interrupts-extended = <&intc_irq GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml b/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
new file mode 100644
index 000000000000..7a1857f5caa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nuvoton,nct3018y.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NUVOTON NCT3018Y Real Time Clock
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Medad CChien <ctcchien@nuvoton.com>
+  - Mia Lin <mimi05633@gmail.com>
+
+properties:
+  compatible:
+    const: nuvoton,nct3018y
+
+  reg:
+    maxItems: 1
+
+  start-year: true
+
+  reset-source: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@6f {
+            compatible = "nuvoton,nct3018y";
+            reg = <0x6f>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
deleted file mode 100644
index b7d98ed3e098..000000000000
--- a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-NVIDIA Tegra20 real-time clock
-
-The Tegra RTC maintains seconds and milliseconds counters, and five alarm
-registers. The alarms and other interrupts may wake the system from low-power
-state.
-
-Required properties:
-
-- compatible : For Tegra20, must contain "nvidia,tegra20-rtc".  Otherwise,
-  must contain '"nvidia,<chip>-rtc", "nvidia,tegra20-rtc"', where <chip>
-  can be tegra30, tegra114, tegra124, or tegra132.
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A single interrupt specifier.
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-
-Example:
-
-timer {
-	compatible = "nvidia,tegra20-rtc";
-	reg = <0x7000e000 0x100>;
-	interrupts = <0 2 0x04>;
-	clocks = <&tegra_car 4>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml
new file mode 100644
index 000000000000..17d6280e5515
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nvidia,tegra20-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra real-time clock
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Tegra RTC maintains seconds and milliseconds counters, and five
+  alarm registers. The alarms and other interrupts may wake the system
+  from low-power state.
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra20-rtc
+      - items:
+          - enum:
+              - nvidia,tegra30-rtc
+              - nvidia,tegra114-rtc
+              - nvidia,tegra124-rtc
+              - nvidia,tegra210-rtc
+              - nvidia,tegra186-rtc
+              - nvidia,tegra194-rtc
+              - nvidia,tegra234-rtc
+          - const: nvidia,tegra20-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rtc
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    timer@7000e000 {
+        compatible = "nvidia,tegra20-rtc";
+        reg = <0x7000e000 0x100>;
+        interrupts = <0 2 0x04>;
+        clocks = <&tegra_car 4>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf2127.yaml b/Documentation/devicetree/bindings/rtc/nxp,pcf2127.yaml
new file mode 100644
index 000000000000..cde7b1675ead
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf2127.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,pcf2127.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCF2127 Real Time Clock
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    const: nxp,pcf2127
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  start-year: true
+
+  reset-source: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+            compatible = "nxp,pcf2127";
+            reg = <0x51>;
+            pinctrl-0 = <&rtc_nint_pins>;
+            interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
+            reset-source;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
deleted file mode 100644
index 627bb533eff7..000000000000
--- a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* NXP PCF85063 Real Time Clock
-
-Required properties:
-- compatible: Should one of contain:
-	"nxp,pcf85063",
-	"nxp,pcf85063a",
-	"nxp,pcf85063tp",
-	"microcrystal,rv8263"
-- reg: I2C address for chip.
-
-Optional property:
-- quartz-load-femtofarads: The capacitive load of the quartz(x-tal),
-  expressed in femto Farad (fF). Valid values are 7000 and 12500.
-  Default value (if no value is specified) is 7000fF.
-
-Example:
-
-pcf85063: rtc@51 {
-	compatible = "nxp,pcf85063";
-	reg = <0x51>;
-	quartz-load-femtofarads = <12500>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml
new file mode 100644
index 000000000000..2f892f8640d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,pcf85063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCF85063 Real Time Clock
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+properties:
+  compatible:
+    enum:
+      - microcrystal,rv8263
+      - nxp,pcf85063
+      - nxp,pcf85063a
+      - nxp,pcf85063tp
+      - nxp,pca85073a
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  quartz-load-femtofarads:
+    description:
+      The capacitive load of the quartz(x-tal).
+    enum: [7000, 12500]
+    default: 7000
+
+  clock:
+    $ref: /schemas/clock/fixed-clock.yaml
+    description:
+      Provide this if the square wave pin is used as boot-enabled
+      fixed clock.
+
+  wakeup-source: true
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microcrystal,rv8263
+    then:
+      properties:
+        quartz-load-femtofarads: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,pcf85063
+    then:
+      properties:
+        quartz-load-femtofarads:
+          const: 7000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+          compatible = "nxp,pcf85063a";
+          reg = <0x51>;
+          quartz-load-femtofarads = <12500>;
+
+          clock {
+            compatible = "fixed-clock";
+            #clock-cells = <0>;
+            clock-frequency = <32768>;
+          };
+        };
+      };
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf8563.yaml b/Documentation/devicetree/bindings/rtc/nxp,pcf8563.yaml
new file mode 100644
index 000000000000..a98b72752349
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf8563.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Philips PCF8563/Epson RTC8564 Real Time Clock
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - epson,rtc8564
+      - microcrystal,rv8564
+      - nxp,pca8565
+      - nxp,pcf8563
+      - nxp,pcf85263
+      - nxp,pcf85363
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  start-year: true
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+            compatible = "nxp,pcf8563";
+            reg = <0x51>;
+            #clock-cells = <0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/rtc/pcf85363.txt b/Documentation/devicetree/bindings/rtc/pcf85363.txt
deleted file mode 100644
index 94adc1cf93d9..000000000000
--- a/Documentation/devicetree/bindings/rtc/pcf85363.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-NXP PCF85263/PCF85363 Real Time Clock
-============================
-
-Required properties:
-- compatible: Should contain "nxp,pcf85263" or "nxp,pcf85363".
-- reg: I2C address for chip.
-
-Optional properties:
-- interrupts: IRQ line for the RTC (not implemented).
-
-Example:
-
-pcf85363: pcf85363@51 {
-	compatible = "nxp,pcf85363";
-	reg = <0x51>;
-};
-
diff --git a/Documentation/devicetree/bindings/rtc/pcf8563.txt b/Documentation/devicetree/bindings/rtc/pcf8563.txt
deleted file mode 100644
index 6076fe76dbfa..000000000000
--- a/Documentation/devicetree/bindings/rtc/pcf8563.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Philips PCF8563/Epson RTC8564 Real Time Clock
-
-Philips PCF8563/Epson RTC8564 Real Time Clock
-
-Required properties:
-- compatible: Should contain "nxp,pcf8563",
-	"epson,rtc8564" or
-	"microcrystal,rv8564"
-- reg: I2C address for chip.
-
-Optional property:
-- #clock-cells: Should be 0.
-- clock-output-names:
-  overwrite the default clock name "pcf8563-clkout"
-
-Example:
-
-pcf8563: pcf8563@51 {
-	compatible = "nxp,pcf8563";
-	reg = <0x51>;
-	#clock-cells = <0>;
-};
-
-device {
-...
-	clocks = <&pcf8563>;
-...
-};
diff --git a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
new file mode 100644
index 000000000000..23ab5bb4f395
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/qcom-pm8xxx-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC RTC device
+
+maintainers:
+  - Satya Priya <quic_c_skakit@quicinc.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8058-rtc
+      - qcom,pm8921-rtc
+      - qcom,pm8941-rtc
+      - qcom,pm8018-rtc
+      - qcom,pmk8350-rtc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: rtc
+      - const: alarm
+
+  interrupts:
+    maxItems: 1
+
+  allow-set-time:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates that the setting of RTC time is allowed by the host CPU.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+    spmi_bus: spmi@c440000 {
+      reg = <0x0c440000 0x1100>;
+      #address-cells = <2>;
+      #size-cells = <0>;
+      pmicintc: pmic@0 {
+        reg = <0x0 SPMI_USID>;
+        compatible = "qcom,pm8921";
+        interrupts = <104 8>;
+        #interrupt-cells = <2>;
+        interrupt-controller;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pm8921_rtc: rtc@11d {
+          compatible = "qcom,pm8921-rtc";
+          reg = <0x11d>;
+          interrupts = <0x27 0>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml
new file mode 100644
index 000000000000..2d4741f51663
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/renesas,rzn1-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 SoCs Real-Time Clock DT bindings
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-rtc
+      - const: renesas,rzn1-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: alarm
+      - const: timer
+      - const: pps
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: hclk
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    rtc@40006000 {
+       compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc";
+       reg = <0x40006000 0x1000>;
+       interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
+                    <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
+                    <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+       interrupt-names = "alarm", "timer", "pps";
+       clocks = <&sysctrl R9A06G032_HCLK_RTC>;
+       clock-names = "hclk";
+       power-domains = <&sysctrl>;
+       start-year = <2000>;
+     };
diff --git a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
index dcff573cbdb1..eff9df4b856a 100644
--- a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
@@ -43,6 +43,9 @@ properties:
     items:
       enum: [ fck, rtc_x1, rtc_x3, extal ]
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -50,6 +53,9 @@ required:
   - interrupt-names
   - clocks
   - clock-names
+  - power-domains
+
+additionalProperties: false
 
 examples:
   - |
@@ -66,5 +72,6 @@ examples:
         interrupt-names = "alarm", "period", "carry";
         clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>,
                  <&rtc_x3_clk>, <&extal_clk>;
+        power-domains = <&cpg_clocks>;
         clock-names = "fck", "rtc_x1", "rtc_x3", "extal";
     };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
deleted file mode 100644
index 66f0a31ae9ce..000000000000
--- a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Dallas DS1307 and compatible RTC
-
-Required properties:
-- compatible: should be one of:
-	"dallas,ds1307",
-	"dallas,ds1308",
-	"dallas,ds1337",
-	"dallas,ds1338",
-	"dallas,ds1339",
-	"dallas,ds1388",
-	"dallas,ds1340",
-	"dallas,ds1341",
-	"maxim,ds3231",
-	"st,m41t0",
-	"st,m41t00",
-	"st,m41t11",
-	"microchip,mcp7940x",
-	"microchip,mcp7941x",
-	"pericom,pt7c4338",
-	"epson,rx8025",
-	"isil,isl12057"
-	"epson,rx8130"
-- reg: I2C bus address of the device
-
-Optional properties:
-- interrupts: rtc alarm interrupt.
-- clock-output-names: From common clock binding to override the default output
-                      clock name
-- wakeup-source: Enables wake up of host system on alarm
-- trickle-resistor-ohms : ds1339, ds1340 and ds 1388 only
-	Selected resistor for trickle charger
-	Possible values are 250, 2000, 4000
-	Should be given if trickle charger should be enabled
-- trickle-diode-disable : ds1339, ds1340 and ds 1388 only
-	Do not use internal trickle charger diode
-	Should be given if internal trickle charger diode should be disabled
-
-Example:
-	ds1339: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <20 0>;
-		trickle-resistor-ohms = <250>;
-	};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.yaml b/Documentation/devicetree/bindings/rtc/rtc-ds1307.yaml
new file mode 100644
index 000000000000..98d10e680144
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/rtc-ds1307.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dallas DS1307 and compatible RTC
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - dallas,ds1307
+          - dallas,ds1308
+          - dallas,ds1337
+          - dallas,ds1338
+          - dallas,ds1339
+          - dallas,ds1388
+          - dallas,ds1340
+          - dallas,ds1341
+          - maxim,ds3231
+          - st,m41t0
+          - st,m41t00
+          - st,m41t11
+          - microchip,mcp7940x
+          - microchip,mcp7941x
+          - pericom,pt7c4338
+          - epson,rx8025
+          - isil,isl12057
+          - epson,rx8130
+
+      - items:
+          - enum:
+              - st,m41t00
+          - const: dallas,ds1338
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    maxItems: 2
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    description: From common clock binding to override the default output clock name.
+
+  wakeup-source:
+    description: Enables wake up of host system on alarm.
+
+  vcc-supply: true
+
+allOf:
+  - $ref: rtc.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dallas,ds1339
+              - dallas,ds1340
+              - dallas,ds1388
+    then:
+      properties:
+        trickle-resistor-ohms:
+          description: Selected resistor for trickle charger. Should be specified if trickle
+            charger should be enabled.
+          enum: [ 250, 2000, 4000 ]
+
+        trickle-diode-disable:
+          description: Do not use internal trickle charger diode. Should be given if internal
+            trickle charger diode should be disabled (superseded by aux-voltage-chargeable)
+          deprecated: true
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtc@68 {
+        compatible = "dallas,ds1337";
+        reg = <0x68>;
+        interrupt-parent = <&gpio4>;
+        interrupts = <20 0>;
+        trickle-resistor-ohms = <250>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt
index c746cb221210..cdd196b1e9bd 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt
@@ -21,10 +21,19 @@ Optional properties:
                       clock name
 - wakeup-source: Enables wake up of host system on alarm
 
+Optional child node:
+- clock: Provide this if the square wave pin is used as boot-enabled fixed clock.
+
 Example:
 	rtc@68 {
 		compatible = "st,m41t80";
 		reg = <0x68>;
 		interrupt-parent = <&UIC0>;
 		interrupts = <0x9 0x8>;
+
+		clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
new file mode 100644
index 000000000000..c33d87e5e753
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
@@ -0,0 +1,14 @@
+Device-Tree bindings for MediaTek SoC based RTC
+
+Required properties:
+- compatible	    : Should be "mediatek,mt2712-rtc" : for MT2712 SoC
+- reg 		    : Specifies base physical address and size of the registers;
+- interrupts	    : Should contain the interrupt for RTC alarm;
+
+Example:
+
+rtc: rtc@10011000 {
+	compatible = "mediatek,mt2712-rtc";
+	reg = <0 0x10011000 0 0x1000>;
+	interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
index 55a0c8874c03..7212076a8f1b 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
@@ -14,6 +14,8 @@ For MediaTek PMIC wrapper bus bindings, see:
 Required properties:
 - compatible: Should be one of follows
        "mediatek,mt6323-rtc": for MT6323 PMIC
+       "mediatek,mt6358-rtc": for MT6358 PMIC
+       "mediatek,mt6366-rtc", "mediatek,mt6358-rtc": for MT6366 PMIC
        "mediatek,mt6397-rtc": for MT6397 PMIC
 
 Example:
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
deleted file mode 100644
index 5bcd31d995b0..000000000000
--- a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Real Time Clock of the i.MX SoCs
-
-RTC controller for the i.MX SoCs
-
-Required properties:
-- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc".
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: IRQ line for the RTC.
-- clocks: should contain two entries:
-  * one for the input reference
-  * one for the the SoC RTC
-- clock-names: should contain:
-  * "ref" for the input reference clock
-  * "ipg" for the SoC RTC clock
-
-Example:
-
-rtc@10007000 {
-	compatible = "fsl,imx21-rtc";
-	reg = <0x10007000 0x1000>;
-	interrupts = <22>;
-	clocks = <&clks IMX27_CLK_CKIL>,
-		 <&clks IMX27_CLK_RTC_IPG_GATE>;
-	clock-names = "ref", "ipg";
-};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml b/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml
new file mode 100644
index 000000000000..4f263fa6fd0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/rtc-mxc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Real Time Clock of the i.MX SoCs
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Philippe Reynes <tremyfr@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx1-rtc
+      - fsl,imx21-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: input reference
+      - description: the SoC RTC clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ipg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx27-clock.h>
+
+    rtc@10007000 {
+        compatible = "fsl,imx21-rtc";
+        reg = <0x10007000 0x1000>;
+        interrupts = <22>;
+        clocks = <&clks IMX27_CLK_CKIL>,
+                 <&clks IMX27_CLK_RTC_IPG_GATE>;
+        clock-names = "ref", "ipg";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt
deleted file mode 100644
index 79d7e87b0d91..000000000000
--- a/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* i.MX53 Secure Real Time Clock (SRTC)
-
-Required properties:
-- compatible: should be: "fsl,imx53-rtc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- clocks: should contain the phandle for the rtc clock
-- interrupts: rtc alarm interrupt
-
-Example:
-
-rtc@53fa4000 {
-	compatible = "fsl,imx53-rtc";
-	reg = <0x53fa4000 0x4000>;
-	interrupts = <24>;
-	clocks = <&clks IMX5_CLK_SRTC_GATE>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml
new file mode 100644
index 000000000000..2d1a30663d72
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/rtc-mxc_v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX53 Secure Real Time Clock (SRTC)
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Patrick Bruenn <p.bruenn@beckhoff.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx53-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    rtc@53fa4000 {
+        compatible = "fsl,imx53-rtc";
+        reg = <0x53fa4000 0x4000>;
+        interrupts = <24>;
+        clocks = <&clks IMX5_CLK_SRTC_GATE>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/rtc.txt b/Documentation/devicetree/bindings/rtc/rtc.txt
deleted file mode 100644
index b8d36fce5e2d..000000000000
--- a/Documentation/devicetree/bindings/rtc/rtc.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has been moved to rtc.yaml.
diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml
index ee237b2ed66a..0ec3551f12dd 100644
--- a/Documentation/devicetree/bindings/rtc/rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/rtc.yaml
@@ -17,8 +17,16 @@ properties:
   $nodename:
     pattern: "^rtc(@.*|-[0-9a-f])*$"
 
-  quartz-load-femtofarads:
+  aux-voltage-chargeable:
     $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Tells whether the battery/supercap of the RTC (if any) is
+      chargeable or not:
+      0: not chargeable
+      1: chargeable
+
+  quartz-load-femtofarads:
     description:
       The capacitive load of the quartz(x-tal), expressed in femto
       Farad (fF). The default value shall be listed (if optional),
@@ -35,16 +43,29 @@ properties:
     description:
       Do not use internal trickle charger diode. Should be given if
       internal trickle charger diode should be disabled.
+    deprecated: true
 
   trickle-resistor-ohms:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Selected resistor for trickle charger. Should be given
       if trickle charger should be enabled.
 
+  trickle-voltage-millivolt:
+    description:
+      Selected voltage for trickle charger. Should be given
+      if trickle charger should be enabled and the trickle voltage is different
+      from the RTC main power supply.
+
   wakeup-source:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
       Enables wake up of host system on alarm.
 
+  reset-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The RTC is able to reset the machine.
+
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml
index 76bbf8b7555b..d51b236939bf 100644
--- a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml
@@ -74,6 +74,8 @@ allOf:
           items:
             - const: rtc
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/exynos5420.h>
diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
deleted file mode 100644
index 968ac820254b..000000000000
--- a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Marvell Real Time Clock controller
-
-Required properties:
-- compatible: should be "mrvl,sa1100-rtc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: Should be two. The first interrupt number is the rtc alarm
-  interrupt and the second interrupt number is the rtc hz interrupt.
-- interrupt-names: Assign name of irq resource.
-
-Example:
-	rtc: rtc@d4010000 {
-		compatible = "mrvl,mmp-rtc";
-		reg = <0xd4010000 0x1000>;
-		interrupts = <5>, <6>;
-		interrupt-names = "rtc 1Hz", "rtc alarm";
-	};
diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml b/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml
new file mode 100644
index 000000000000..482e5af215b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/sa1100-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Real Time Clock controller bindings
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Alessandro Zummo <a.zummo@towertech.it>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Rob Herring <robh+dt@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - mrvl,sa1100-rtc
+      - mrvl,mmp-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+
+  interrupt-names:
+    items:
+      - const: 'rtc 1Hz'
+      - const: 'rtc alarm'
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc: rtc@d4010000 {
+        compatible = "mrvl,mmp-rtc";
+        reg = <0xd4010000 0x1000>;
+        interrupts = <5>, <6>;
+        interrupt-names = "rtc 1Hz", "rtc alarm";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt b/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt
deleted file mode 100644
index 58885b55da21..000000000000
--- a/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-SiRFSoC Real Time Clock
-
-Required properties:
-- compatible: must be "sirf,prima2-sysrtc"
-- reg: address range of rtc register set.
-- interrupts: rtc alarm interrupts.
-
-Example:
-	rtc@2000 {
-		compatible = "sirf,prima2-sysrtc";
-		reg = <0x2000 0x1000>;
-		interrupts = <52 53 54>;
-	};
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
index 0a54296d7218..764717ce1873 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 Real Time Clock Bindings
 
 maintainers:
-  - Gabriel Fernandez <gabriel.fernandez@st.com>
+  - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
 
 properties:
   compatible:
@@ -32,16 +32,15 @@ properties:
     maxItems: 1
 
   st,syscfg:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
-      - items:
-          minItems: 3
-          maxItems: 3
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      minItems: 3
+      maxItems: 3
     description: |
-       Phandle/offset/mask triplet. The phandle to pwrcfg used to
-       access control register at offset, and change the dbp (Disable Backup
-       Protection) bit represented by the mask, mandatory to disable/enable backup
-       domain (RTC registers) write protection.
+      Phandle/offset/mask triplet. The phandle to pwrcfg used to
+      access control register at offset, and change the dbp (Disable Backup
+      Protection) bit represented by the mask, mandatory to disable/enable backup
+      domain (RTC registers) write protection.
 
   assigned-clocks:
     description: |
@@ -78,14 +77,14 @@ allOf:
             const: st,stm32h7-rtc
 
     then:
-       properties:
-         clocks:
-           minItems: 2
-           maxItems: 2
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
 
-       required:
-         - clock-names
-         - st,syscfg
+      required:
+        - clock-names
+        - st,syscfg
 
   - if:
       properties:
@@ -94,16 +93,16 @@ allOf:
             const: st,stm32mp1-rtc
 
     then:
-       properties:
-         clocks:
-           minItems: 2
-           maxItems: 2
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
 
-         assigned-clocks: false
-         assigned-clock-parents: false
+        assigned-clocks: false
+        assigned-clock-parents: false
 
-       required:
-         - clock-names
+      required:
+        - clock-names
 
 required:
   - compatible
@@ -111,6 +110,8 @@ required:
   - clocks
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/mfd/stm32f4-rcc.h>
@@ -126,6 +127,7 @@ examples:
       st,syscfg = <&pwrcfg 0x00 0x100>;
     };
 
+  - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     rtc@5c004000 {
diff --git a/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt
deleted file mode 100644
index e615a897b20e..000000000000
--- a/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-ST-Ericsson COH 901 331 Real Time Clock
-
-Required properties:
-- compatible: must be "stericsson,coh901331"
-- reg: address range of rtc register set.
-- interrupts: rtc alarm interrupt.
-- clocks: phandle to the rtc clock source
-
-Example:
-	rtc: rtc@c0017000 {
-		compatible = "stericsson,coh901331";
-		reg = <0xc0017000 0x1000>;
-		interrupt-parent = <&vicb>;
-		interrupts = <10>;
-		clocks = <&rtc_clk>;
-	};
diff --git a/Documentation/devicetree/bindings/rtc/sunplus,sp7021-rtc.yaml b/Documentation/devicetree/bindings/rtc/sunplus,sp7021-rtc.yaml
new file mode 100644
index 000000000000..fd1b3e71ff2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/sunplus,sp7021-rtc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/sunplus,sp7021-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Real Time Clock controller
+
+maintainers:
+  - Vincent Shih <vincent.sunplus@gmail.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-rtc
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: rtc
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc: serial@9c003a00 {
+        compatible = "sunplus,sp7021-rtc";
+        reg = <0x9c003a00 0x80>;
+        reg-names = "rtc";
+        clocks = <&clkc 0x12>;
+        resets = <&rstc 0x02>;
+        interrupt-parent = <&intc>;
+        interrupts = <163 IRQ_TYPE_EDGE_RISING>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rtc/ti,bq32000.yaml b/Documentation/devicetree/bindings/rtc/ti,bq32000.yaml
new file mode 100644
index 000000000000..bf9c1c4ddb7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/ti,bq32000.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/ti,bq32000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ32000 I2C Serial Real-Time Clock
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: ti,bq32000
+
+  reg:
+    const: 0x68
+
+  interrupts:
+    maxItems: 1
+
+  start-year: true
+
+  trickle-resistor-ohms:
+    enum: [ 1120, 20180 ]
+
+  trickle-diode-disable: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            bq32000: rtc@68 {
+                    compatible = "ti,bq32000";
+                    reg = <0x68>;
+                    trickle-resistor-ohms = <1120>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/ti,bq32k.txt b/Documentation/devicetree/bindings/rtc/ti,bq32k.txt
deleted file mode 100644
index e204906b9ad3..000000000000
--- a/Documentation/devicetree/bindings/rtc/ti,bq32k.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* TI BQ32000                I2C Serial Real-Time Clock
-
-Required properties:
-- compatible: Should contain "ti,bq32000".
-- reg: I2C address for chip
-
-Optional properties:
-- trickle-resistor-ohms : Selected resistor for trickle charger
-       Values usable are 1120 and 20180
-       Should be given if trickle charger should be enabled
-- trickle-diode-disable : Do not use internal trickle charger diode
-       Should be given if internal trickle charger diode should be disabled
-Example:
-       bq32000: rtc@68 {
-               compatible = "ti,bq32000";
-               trickle-resistor-ohms = <1120>;
-               reg = <0x68>;
-       };
diff --git a/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml b/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml
new file mode 100644
index 000000000000..d995ef04a6eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/ti,k3-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Real Time Clock
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  This RTC appears in the AM62x family of SoCs.
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ti,am62-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: VBUS Interface clock
+      - description: 32k Clock source (external or internal).
+
+  clock-names:
+    items:
+      - const: vbus
+      - const: osc32k
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    rtc@2b1f0000 {
+        compatible = "ti,am62-rtc";
+        reg = <0x2b1f0000 0x100>;
+        interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&bar 0>;
+        clocks = <&foo 0>, <&foo 1>;
+        clock-names = "vbus", "osc32k";
+        wakeup-source;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
index 18cb456752f6..d9fc120c61cc 100644
--- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
@@ -30,8 +30,13 @@ properties:
       - dallas,ds1672
       # Extremely Accurate I²C RTC with Integrated Crystal and SRAM
       - dallas,ds3232
+      # EM Microelectronic EM3027 RTC
+      - emmicro,em3027
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
       - epson,rx8010
+      # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
+      - epson,rx8025
+      - epson,rx8035
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM
       - epson,rx8571
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
@@ -48,9 +53,7 @@ properties:
       - microcrystal,rv3029
       # Real Time Clock
       - microcrystal,rv8523
-      # Real-time clock
-      - nxp,pcf2127
-      # Real-time clock
+      - nxp,pca2129
       - nxp,pcf2129
       # Real-time Clock Module
       - pericom,pt7c4338
diff --git a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
new file mode 100644
index 000000000000..7ed0230f6c67
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/xlnx,zynqmp-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale+ MPSoC Real Time Clock
+
+description:
+  RTC controller for the Xilinx Zynq MPSoC Real Time Clock.
+  The RTC controller has separate IRQ lines for seconds and alarm.
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rtc
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: alarm
+      - const: sec
+
+  calibration:
+    description: |
+      calibration value for 1 sec period which will
+      be programmed directly to calibration register.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x1
+    maximum: 0x1FFFFF
+    default: 0x198233
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      rtc: rtc@ffa60000 {
+        compatible = "xlnx,zynqmp-rtc";
+        reg = <0x0 0xffa60000 0x0 0x100>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 26 4>, <0 27 4>;
+        interrupt-names = "alarm", "sec";
+        calibration = <0x198233>;
+        clock-names = "rtc";
+        clocks = <&rtc_clk>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt b/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt
deleted file mode 100644
index 0df6f016b1b7..000000000000
--- a/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Xilinx Zynq Ultrascale+ MPSoC Real Time Clock
-
-RTC controller for the Xilinx Zynq MPSoC Real Time Clock
-Separate IRQ lines for seconds and alarm
-
-Required properties:
-- compatible: Should be "xlnx,zynqmp-rtc"
-- reg: Physical base address of the controller and length
-       of memory mapped region.
-- interrupts: IRQ lines for the RTC.
-- interrupt-names: interrupt line names eg. "sec" "alarm"
-
-Optional:
-- calibration: calibration value for 1 sec period which will
-		be programmed directly to calibration register
-
-Example:
-rtc: rtc@ffa60000 {
-	compatible = "xlnx,zynqmp-rtc";
-	reg = <0x0 0xffa60000 0x100>;
-	interrupt-parent = <&gic>;
-	interrupts = <0 26 4>, <0 27 4>;
-	interrupt-names = "alarm", "sec";
-	calibration = <0x198233>;
-};
diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
deleted file mode 100644
index 55700f20f6ee..000000000000
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-* UART (Universal Asynchronous Receiver/Transmitter)
-
-Required properties:
-- compatible : one of:
-	- "ns8250"
-	- "ns16450"
-	- "ns16550a"
-	- "ns16550"
-	- "ns16750"
-	- "ns16850"
-	- For Tegra20, must contain "nvidia,tegra20-uart"
-	- For other Tegra, must contain '"nvidia,<chip>-uart",
-	  "nvidia,tegra20-uart"' where <chip> is tegra30, tegra114, tegra124,
-	  tegra132, or tegra210.
-	- "nxp,lpc3220-uart"
-	- "ralink,rt2880-uart"
-	- For MediaTek BTIF, must contain '"mediatek,<chip>-btif",
-	  "mediatek,mtk-btif"' where <chip> is mt7622, mt7623.
-	- "altr,16550-FIFO32"
-	- "altr,16550-FIFO64"
-	- "altr,16550-FIFO128"
-	- "fsl,16550-FIFO64"
-	- "fsl,ns16550"
-	- "intel,xscale-uart"
-	- "ti,da830-uart"
-	- "aspeed,ast2400-vuart"
-	- "aspeed,ast2500-vuart"
-	- "nuvoton,npcm750-uart"
-	- "serial" if the port type is unknown.
-- reg : offset and length of the register set for the device.
-- interrupts : should contain uart interrupt.
-- clock-frequency : the input clock frequency for the UART
-	 or
-  clocks phandle to refer to the clk used as per Documentation/devicetree
-  /bindings/clock/clock-bindings.txt
-
-Optional properties:
-- current-speed : the current active speed of the UART.
-- reg-offset : offset to apply to the mapbase from the start of the registers.
-- reg-shift : quantity to shift the register offsets by.
-- reg-io-width : the size (in bytes) of the IO accesses that should be
-  performed on the device.  There are some systems that require 32-bit
-  accesses to the UART (e.g. TI davinci).
-- used-by-rtas : set to indicate that the port is in use by the OpenFirmware
-  RTAS and should not be registered.
-- no-loopback-test: set to indicate that the port does not implements loopback
-  test mode
-- fifo-size: the fifo size of the UART.
-- auto-flow-control: one way to enable automatic flow control support. The
-  driver is allowed to detect support for the capability even without this
-  property.
-- tx-threshold: Specify the TX FIFO low water indication for parts with
-  programmable TX FIFO thresholds.
-- resets : phandle + reset specifier pairs
-- overrun-throttle-ms : how long to pause uart rx when input overrun is encountered.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
-  line respectively. It will use specified GPIO instead of the peripheral
-  function pin for the UART feature. If unsure, don't specify this property.
-- aspeed,sirq-polarity-sense: Only applicable to aspeed,ast2500-vuart.
-  phandle to aspeed,ast2500-scu compatible syscon alongside register offset
-  and bit number to identify how the SIRQ polarity should be configured.
-  One possible data source is the LPC/eSPI mode bit.
-  Example: aspeed,sirq-polarity-sense = <&syscon 0x70 25>
-
-Note:
-* fsl,ns16550:
-  ------------
-  Freescale DUART is very similar to the PC16552D (and to a
-  pair of NS16550A), albeit with some nonstandard behavior such as
-  erratum A-004737 (relating to incorrect BRK handling).
-
-  Represents a single port that is compatible with the DUART found
-  on many Freescale chips (examples include mpc8349, mpc8548,
-  mpc8641d, p4080 and ls2085a).
-
-Example:
-
-	uart@80230000 {
-		compatible = "ns8250";
-		reg = <0x80230000 0x100>;
-		clock-frequency = <3686400>;
-		interrupts = <10>;
-		reg-shift = <2>;
-	};
-
-Example for OMAP UART using GPIO-based modem control signals:
-
-	uart4: serial@49042000 {
-		compatible = "ti,omap3-uart";
-		reg = <0x49042000 0x400>;
-		interrupts = <80>;
-		ti,hwmods = "uart4";
-		clock-frequency = <48000000>;
-		cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-		rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-		dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
new file mode 100644
index 000000000000..6258f5f59b19
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -0,0 +1,259 @@
+# Copyright 2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UART (Universal Asynchronous Receiver/Transmitter) bindings
+
+maintainers:
+  - devicetree@vger.kernel.org
+
+allOf:
+  - $ref: serial.yaml#
+  - if:
+      anyOf:
+        - required:
+            - aspeed,lpc-io-reg
+        - required:
+            - aspeed,lpc-interrupts
+        - required:
+            - aspeed,sirq-polarity-sense
+    then:
+      properties:
+        compatible:
+          const: aspeed,ast2500-vuart
+  - if:
+      properties:
+        compatible:
+          const: mrvl,mmp-uart
+    then:
+      properties:
+        reg-shift:
+          const: 2
+      required:
+        - reg-shift
+  - if:
+      not:
+        properties:
+          compatible:
+            items:
+              - enum:
+                  - ns8250
+                  - ns16450
+                  - ns16550
+                  - ns16550a
+    then:
+      anyOf:
+        - required: [ clock-frequency ]
+        - required: [ clocks ]
+
+properties:
+  compatible:
+    oneOf:
+      - const: ns8250
+      - const: ns16450
+      - const: ns16550
+      - const: ns16550a
+      - const: ns16850
+      - const: aspeed,ast2400-vuart
+      - const: aspeed,ast2500-vuart
+      - const: intel,xscale-uart
+      - const: mrvl,pxa-uart
+      - const: nuvoton,wpcm450-uart
+      - const: nuvoton,npcm750-uart
+      - const: nuvoton,npcm845-uart
+      - const: nvidia,tegra20-uart
+      - const: nxp,lpc3220-uart
+      - items:
+          - enum:
+              - exar,xr16l2552
+              - exar,xr16l2551
+              - exar,xr16l2550
+          - const: ns8250
+      - items:
+          - enum:
+              - altr,16550-FIFO32
+              - altr,16550-FIFO64
+              - altr,16550-FIFO128
+              - fsl,16550-FIFO64
+              - fsl,ns16550
+              - andestech,uart16550
+              - nxp,lpc1850-uart
+              - opencores,uart16550-rtlsvn105
+              - ti,da830-uart
+          - const: ns16550a
+      - items:
+          - enum:
+              - ns16750
+              - cavium,octeon-3860-uart
+              - xlnx,xps-uart16550-2.00.b
+              - ralink,rt2880-uart
+          - enum:
+              - ns16550 # Deprecated, unless the FIFO really is broken
+              - ns16550a
+      - items:
+          - enum:
+              - ralink,mt7620a-uart
+              - ralink,rt3052-uart
+              - ralink,rt3883-uart
+          - const: ralink,rt2880-uart
+          - enum:
+              - ns16550 # Deprecated, unless the FIFO really is broken
+              - ns16550a
+      - items:
+          - enum:
+              - mediatek,mt7622-btif
+              - mediatek,mt7623-btif
+          - const: mediatek,mtk-btif
+      - items:
+          - const: mrvl,mmp-uart
+          - const: intel,xscale-uart
+      - items:
+          - enum:
+              - nvidia,tegra30-uart
+              - nvidia,tegra114-uart
+              - nvidia,tegra124-uart
+              - nvidia,tegra210-uart
+              - nvidia,tegra186-uart
+              - nvidia,tegra194-uart
+              - nvidia,tegra234-uart
+          - const: nvidia,tegra20-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency: true
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  current-speed:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The current active speed of the UART.
+
+  reg-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Offset to apply to the mapbase from the start of the registers.
+
+  reg-shift:
+    description: Quantity to shift the register offsets by.
+
+  reg-io-width:
+    description: |
+      The size (in bytes) of the IO accesses that should be performed on the
+      device. There are some systems that require 32-bit accesses to the
+      UART (e.g. TI davinci).
+
+  used-by-rtas:
+    type: boolean
+    description: |
+      Set to indicate that the port is in use by the OpenFirmware RTAS and
+      should not be registered.
+
+  no-loopback-test:
+    type: boolean
+    description: |
+      Set to indicate that the port does not implement loopback test mode.
+
+  fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The fifo size of the UART.
+
+  auto-flow-control:
+    type: boolean
+    description: |
+      One way to enable automatic flow control support. The driver is
+      allowed to detect support for the capability even without this
+      property.
+
+  tx-threshold:
+    description: |
+      Specify the TX FIFO low water indication for parts with programmable
+      TX FIFO thresholds.
+
+  overrun-throttle-ms:
+    description: |
+      How long to pause uart rx when input overrun is encountered.
+
+  rts-gpios: true
+  cts-gpios: true
+  dtr-gpios: true
+  dsr-gpios: true
+  rng-gpios: true
+  dcd-gpios: true
+
+  aspeed,sirq-polarity-sense:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Phandle to aspeed,ast2500-scu compatible syscon alongside register
+      offset and bit number to identify how the SIRQ polarity should be
+      configured. One possible data source is the LPC/eSPI mode bit. Only
+      applicable to aspeed,ast2500-vuart.
+    deprecated: true
+
+  aspeed,lpc-io-reg:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: |
+      The VUART LPC address.  Only applicable to aspeed,ast2500-vuart.
+
+  aspeed,lpc-interrupts:
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    minItems: 2
+    maxItems: 2
+    description: |
+      A 2-cell property describing the VUART SIRQ number and SIRQ
+      polarity (IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_LEVEL_HIGH).  Only
+      applicable to aspeed,ast2500-vuart.
+
+required:
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@80230000 {
+        compatible = "ns8250";
+        reg = <0x80230000 0x100>;
+        interrupts = <10>;
+        reg-shift = <2>;
+        clock-frequency = <48000000>;
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial@49042000 {
+        compatible = "andestech,uart16550", "ns16550a";
+        reg = <0x49042000 0x400>;
+        interrupts = <80>;
+        clock-frequency = <48000000>;
+        cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+        rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+        dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+        dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+        dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+        rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+    };
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    serial@1e787000 {
+        compatible = "aspeed,ast2500-vuart";
+        reg = <0x1e787000 0x40>;
+        reg-shift = <2>;
+        interrupts = <8>;
+        clocks = <&syscon ASPEED_CLK_APB>;
+        no-loopback-test;
+        aspeed,lpc-io-reg = <0x3f8>;
+        aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
new file mode 100644
index 000000000000..7b34ec8fa90e
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/8250_omap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for 8250 compliant UARTs on TI's OMAP2+ and K3 SoCs
+
+maintainers:
+  - Vignesh Raghavendra <vigneshr@ti.com>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+  - $ref: /schemas/serial/rs485.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,am3352-uart
+          - ti,am4372-uart
+          - ti,am654-uart
+          - ti,dra742-uart
+          - ti,omap2-uart
+          - ti,omap3-uart
+          - ti,omap4-uart
+      - items:
+          - enum:
+              - ti,am64-uart
+              - ti,j721e-uart
+          - const: ti,am654-uart
+
+  ti,hwmods:
+    description:
+      Must be "uart<n>", n being the instance number (1-based)
+      This property is applicable only on legacy platforms mainly omap2/3
+      and ti81xx and should not be used on other platforms.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description:
+      First entry is module IRQ required for normal IO operation.
+      Second entry is optional and corresponds to system wakeup IRQ
+      where supported.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fclk
+
+  rts-gpios: true
+  cts-gpios: true
+  dtr-gpios: true
+  dsr-gpios: true
+  rng-gpios: true
+  dcd-gpios: true
+  rs485-rts-delay: true
+  rs485-rts-active-low: true
+  rs485-rx-during-tx: true
+  rs485-rts-active-high: true
+  linux,rs485-enabled-at-boot-time: true
+  rts-gpio: true
+  power-domains: true
+  clock-frequency: true
+  current-speed: true
+  overrun-throttle-ms: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ti,omap2-uart
+          - ti,omap3-uart
+          - ti,omap4-uart
+
+then:
+  properties:
+    ti,hwmods:
+      items:
+        - pattern: "^uart([1-9])$"
+
+else:
+  properties:
+    ti,hwmods: false
+
+examples:
+  - |
+          serial@49042000 {
+            compatible = "ti,omap3-uart";
+            reg = <0x49042000 0x400>;
+            interrupts = <80>;
+            dmas = <&sdma 81 &sdma 82>;
+            dma-names = "tx", "rx";
+            ti,hwmods = "uart4";
+            clock-frequency = <48000000>;
+          };
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 214fe8beddc3..7822705ad16c 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson SoC UART Serial Interface
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic Meson SoC UART Serial Interface is present on a large range
@@ -24,18 +24,20 @@ properties:
     oneOf:
       - description: Always-on power domain UART controller
         items:
-        - enum:
+          - enum:
+              - amlogic,meson6-uart
+              - amlogic,meson8-uart
+              - amlogic,meson8b-uart
+              - amlogic,meson-gx-uart
+              - amlogic,meson-s4-uart
+          - const: amlogic,meson-ao-uart
+      - description: Everything-Else power domain UART controller
+        enum:
           - amlogic,meson6-uart
           - amlogic,meson8-uart
           - amlogic,meson8b-uart
           - amlogic,meson-gx-uart
-        - const: amlogic,meson-ao-uart
-      - description: Everything-Else power domain UART controller
-        enum:
-        - amlogic,meson6-uart
-        - amlogic,meson8-uart
-        - amlogic,meson8b-uart
-        - amlogic,meson-gx-uart
+          - amlogic,meson-s4-uart
 
   reg:
     maxItems: 1
@@ -55,6 +57,11 @@ properties:
       - const: pclk
       - const: baud
 
+  fifo-size:
+    description: The fifo size supported by the UART channel.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [64, 128]
+
 required:
   - compatible
   - reg
@@ -62,6 +69,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     serial@84c0 {
diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
new file mode 100644
index 000000000000..30b2131b5860
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/atmel,at91-usart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
+
+maintainers:
+  - Richard Genoud <richard.genoud@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,at91rm9200-usart
+          - atmel,at91sam9260-usart
+          - microchip,sam9x60-usart
+      - items:
+          - const: atmel,at91rm9200-dbgu
+          - const: atmel,at91rm9200-usart
+      - items:
+          - const: atmel,at91sam9260-dbgu
+          - const: atmel,at91sam9260-usart
+      - items:
+          - const: microchip,sam9x60-dbgu
+          - const: microchip,sam9x60-usart
+          - const: atmel,at91sam9260-dbgu
+          - const: atmel,at91sam9260-usart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: usart
+      - const: gclk
+
+  clocks:
+    minItems: 1
+    items:
+      - description: USART Peripheral Clock
+      - description: USART Generic Clock
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  atmel,usart-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Must be either <AT91_USART_MODE_SPI> for SPI or
+      <AT91_USART_MODE_SERIAL> for USART (found in dt-bindings/mfd/at91-usart.h).
+    enum: [ 0, 1 ]
+
+  atmel,use-dma-rx:
+    type: boolean
+    description: use of PDC or DMA for receiving data
+
+  atmel,use-dma-tx:
+    type: boolean
+    description: use of PDC or DMA for transmitting data
+
+  atmel,fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum number of data the RX and TX FIFOs can store for FIFO
+      capable USARTS.
+    enum: [ 16, 32 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - atmel,usart-mode
+
+allOf:
+  - if:
+      properties:
+        atmel,usart-mode:
+          const: 1
+    then:
+      allOf:
+        - $ref: /schemas/spi/spi-controller.yaml#
+
+      properties:
+        atmel,use-dma-rx: false
+
+        atmel,use-dma-tx: false
+
+        atmel,fifo-size: false
+
+        "#size-cells":
+          const: 0
+
+        "#address-cells":
+          const: 1
+
+      required:
+        - "#size-cells"
+        - "#address-cells"
+
+    else:
+      allOf:
+        - $ref: /schemas/serial/serial.yaml#
+        - $ref: /schemas/serial/rs485.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/at91-usart.h>
+    #include <dt-bindings/dma/at91.h>
+
+    /* use PDC */
+    usart0: serial@fff8c000 {
+        compatible = "atmel,at91sam9260-usart";
+        reg = <0xfff8c000 0x4000>;
+        atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+        interrupts = <7>;
+        clocks = <&usart0_clk>;
+        clock-names = "usart";
+        atmel,use-dma-rx;
+        atmel,use-dma-tx;
+        rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
+        cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
+        dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
+        dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+        dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
+        rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/at91-usart.h>
+    #include <dt-bindings/dma/at91.h>
+
+    /* use DMA */
+    usart1: serial@f001c000 {
+        compatible = "atmel,at91sam9260-usart";
+        reg = <0xf001c000 0x100>;
+        atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+        clocks = <&usart0_clk>;
+        clock-names = "usart";
+        atmel,use-dma-rx;
+        atmel,use-dma-tx;
+        dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+               <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+        dma-names = "tx", "rx";
+        atmel,fifo-size = <32>;
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/at91-usart.h>
+    #include <dt-bindings/dma/at91.h>
+
+    /* SPI mode */
+    spi0: spi@f001c000 {
+        compatible = "atmel,at91sam9260-usart";
+        reg = <0xf001c000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        atmel,usart-mode = <AT91_USART_MODE_SPI>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+        clocks = <&usart0_clk>;
+        clock-names = "usart";
+        dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+               <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+        dma-names = "tx", "rx";
+        cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
deleted file mode 100644
index 8b2b0460259a..000000000000
--- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* BCM63xx UART
-
-Required properties:
-
-- compatible: "brcm,bcm6345-uart"
-
-- reg: The base address of the UART register bank.
-
-- interrupts: A single interrupt specifier.
-
-- clocks: Clock driving the hardware; used to figure out the baud rate
-  divisor.
-
-
-Optional properties:
-
-- clock-names: Should be "refclk".
-
-Example:
-
-	uart0: serial@14e00520 {
-		compatible = "brcm,bcm6345-uart";
-		reg = <0x14e00520 0x18>;
-		interrupt-parent = <&periph_intc>;
-		interrupts = <2>;
-		clocks = <&periph_clk>;
-		clock-names = "refclk";
-	};
-
-	clocks {
-		periph_clk: periph_clk@0 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <54000000>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml
new file mode 100644
index 000000000000..a22285c43f80
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/brcm,bcm6345-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM63xx UART
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm6345-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: refclk
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    serial@14e00520 {
+        compatible = "brcm,bcm6345-uart";
+        reg = <0x14e00520 0x18>;
+        interrupt-parent = <&periph_intc>;
+        interrupts = <2>;
+        clocks = <&periph_clk>;
+        clock-names = "refclk";
+    };
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
new file mode 100644
index 000000000000..6d176588df47
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/brcm,bcm7271-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom 8250 based serial port devicetree bindings
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+description: |+
+  The Broadcom UART is based on the basic 8250 UART but with
+  enhancements for more accurate high speed baud rates and support
+  for DMA.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7271-uart
+          - brcm,bcm7278-uart
+
+  reg:
+    minItems: 1
+    maxItems: 5
+
+  reg-names:
+    description: The UART register block and optionally the DMA register blocks.
+    oneOf:
+      - items:
+          - const: uart
+      - items:
+          - const: uart
+          - const: dma_arb
+          - const: dma_rx
+          - const: dma_tx
+          - const: dma_intr2
+
+  clocks:
+    minItems: 1
+
+  clock-names:
+    const: sw_baud
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description: The UART interrupt and optionally the DMA interrupt.
+    minItems: 1
+    items:
+      - const: uart
+      - const: dma
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@840d000 {
+        compatible = "brcm,bcm7271-uart";
+        reg = <0x840d000 0x20>;
+        reg-names = "uart";
+        interrupts = <0x0 0x62 0x4>;
+        interrupt-names = "uart";
+        clocks = <&scmi_clk 190>;
+        clock-names = "sw_baud";
+    };
+
+    serial@840e000 {
+        compatible = "brcm,bcm7271-uart";
+        reg = <0x840e000 0x20>,
+              <0x840e080 0x8>,
+              <0x840e100 0xa8>,
+              <0x840e200 0x4c>,
+              <0x840e300 0x30>;
+        reg-names = "uart", "dma_arb", "dma_rx", "dma_tx", "dma_intr2";
+        interrupts = <0x0 0x62 0x4>, <0x0 0x75 0x4>;
+        interrupt-names = "uart", "dma";
+        clocks = <&scmi_clk 190>;
+        clock-names = "sw_baud";
+    };
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.txt b/Documentation/devicetree/bindings/serial/cdns,uart.txt
deleted file mode 100644
index 4efc560f90ab..000000000000
--- a/Documentation/devicetree/bindings/serial/cdns,uart.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Binding for Cadence UART Controller
-
-Required properties:
-- compatible :
-  Use "xlnx,xuartps","cdns,uart-r1p8" for Zynq-7xxx SoC.
-  Use "xlnx,zynqmp-uart","cdns,uart-r1p12" for Zynq Ultrascale+ MPSoC.
-- reg: Should contain UART controller registers location and length.
-- interrupts: Should contain UART controller interrupts.
-- clocks: Must contain phandles to the UART clocks
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Tuple to identify input clocks, must contain "uart_clk" and "pclk"
-  See ../clocks/clock-bindings.txt for details.
-
-
-Optional properties:
-- cts-override : Override the CTS modem status signal. This signal will
-  always be reported as active instead of being obtained from the modem status
-  register. Define this if your serial port does not use this pin
-
-Example:
-	uart@e0000000 {
-		compatible = "cdns,uart-r1p8";
-		clocks = <&clkc 23>, <&clkc 40>;
-		clock-names = "uart_clk", "pclk";
-		reg = <0xE0000000 0x1000>;
-		interrupts = <0 27 4>;
-	};
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
new file mode 100644
index 000000000000..876b8cf1cafb
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/cdns,uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence UART Controller
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+allOf:
+  - $ref: /schemas/serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: UART controller for Zynq-7xxx SoC
+        items:
+          - const: xlnx,xuartps
+          - const: cdns,uart-r1p8
+      - description: UART controller for Zynq Ultrascale+ MPSoC
+        items:
+          - const: xlnx,zynqmp-uart
+          - const: cdns,uart-r1p12
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: uart_clk
+      - const: pclk
+
+  cts-override:
+    description: |
+      Override the CTS modem status signal. This signal will
+      always be reported as active instead of being obtained
+      from the modem status register. Define this if your serial
+      port does not use this pin.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    uart0: serial@e0000000 {
+      compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+      clocks = <&clkc 23>, <&clkc 40>;
+      clock-names = "uart_clk", "pclk";
+      reg = <0xE0000000 0x1000>;
+      interrupts = <0 27 4>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt
deleted file mode 100644
index 4f8d8fde0c1c..000000000000
--- a/Documentation/devicetree/bindings/serial/efm32-uart.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Energymicro efm32 UART
-
-Required properties:
-- compatible : Should be "energymicro,efm32-uart"
-- reg : Address and length of the register set
-- interrupts : Should contain uart interrupt
-
-Optional properties:
-- energymicro,location : Decides the location of the USART I/O pins.
-  Allowed range : [0 .. 5]
-  Default: 0
-
-Example:
-
-uart@4000c400 {
-	compatible = "energymicro,efm32-uart";
-	reg = <0x4000c400 0x400>;
-	interrupts = <15>;
-	energymicro,location = <0>;
-};
diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt
deleted file mode 100644
index f1bbe0826be5..000000000000
--- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Freescale LINFlexD UART
-
-The LINFlexD controller implements several LIN protocol versions, as well as
-support for full-duplex UART communication through 8-bit and 9-bit frames.
-
-See chapter 47 ("LINFlexD") in the reference manual[1].
-
-Required properties:
-- compatible :
-  - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which
-    is compatible with the one integrated on S32V234 SoC
-- reg : Address and length of the register set for the device
-- interrupts : Should contain uart interrupt
-
-Example:
-uart0: serial@40053000 {
-	compatible = "fsl,s32v234-linflexuart";
-	reg = <0x0 0x40053000 0x0 0x1000>;
-	interrupts = <0 59 4>;
-};
-
-[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM
diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
new file mode 100644
index 000000000000..8b643bae3c7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale LINFlexD UART
+
+description: |
+  The LINFlexD controller implements several LIN protocol versions, as well
+  as support for full-duplex UART communication through 8-bit and 9-bit
+  frames. See chapter 47 ("LINFlexD") in the reference manual
+  https://www.nxp.com/webapp/Download?colCode=S32V234RM.
+
+maintainers:
+  - Chester Lin <clin@suse.com>
+
+allOf:
+  - $ref: "serial.yaml"
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,s32v234-linflexuart
+      - items:
+          - const: nxp,s32g2-linflexuart
+          - const: fsl,s32v234-linflexuart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@40053000 {
+        compatible = "fsl,s32v234-linflexuart";
+        reg = <0x40053000 0x1000>;
+        interrupts = <0 59 4>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
deleted file mode 100644
index 35957cbf1571..000000000000
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
-
-Required properties:
-- compatible : Should be "fsl,<soc>-uart"
-- reg : Address and length of the register set for the device
-- interrupts : Should contain uart interrupt
-
-Optional properties:
-- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
-                  in DCE mode by default.
-- rs485-rts-delay, rs485-rts-active-low, rs485-rx-during-tx,
-  linux,rs485-enabled-at-boot-time: see rs485.txt. Note that for RS485
-  you must enable either the "uart-has-rtscts" or the "rts-gpios"
-  properties. In case you use "uart-has-rtscts" the signal that controls
-  the transceiver is actually CTS_B, not RTS_B. CTS_B is always output,
-  and RTS_B is input, regardless of dte-mode.
-
-Please check Documentation/devicetree/bindings/serial/serial.txt
-for the complete list of generic properties.
-
-Note: Each uart controller should have an alias correctly numbered
-in "aliases" node.
-
-Example:
-
-aliases {
-	serial0 = &uart1;
-};
-
-uart1: serial@73fbc000 {
-	compatible = "fsl,imx51-uart", "fsl,imx21-uart";
-	reg = <0x73fbc000 0x4000>;
-	interrupts = <31>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-};
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
new file mode 100644
index 000000000000..9d949296a142
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl-imx-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+  - $ref: "serial.yaml"
+  - $ref: "rs485.yaml"
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx1-uart
+      - const: fsl,imx21-uart
+      - items:
+          - enum:
+              - fsl,imx25-uart
+              - fsl,imx27-uart
+              - fsl,imx31-uart
+              - fsl,imx35-uart
+              - fsl,imx50-uart
+              - fsl,imx51-uart
+              - fsl,imx53-uart
+              - fsl,imx6q-uart
+          - const: fsl,imx21-uart
+      - items:
+          - enum:
+              - fsl,imx6sl-uart
+              - fsl,imx6sll-uart
+              - fsl,imx6sx-uart
+          - const: fsl,imx6q-uart
+          - const: fsl,imx21-uart
+      - items:
+          - enum:
+              - fsl,imx6ul-uart
+              - fsl,imx7d-uart
+              - fsl,imx8mm-uart
+              - fsl,imx8mn-uart
+              - fsl,imx8mp-uart
+              - fsl,imx8mq-uart
+          - const: fsl,imx6q-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,dte-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Indicate the uart works in DTE mode. The uart works in DCE mode by default.
+
+  fsl,inverted-tx:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Indicate that the hardware attached to the peripheral inverts the signal
+      transmitted, and that the peripheral should invert its output using the
+      INVT registers.
+
+  fsl,inverted-rx:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Indicate that the hardware attached to the peripheral inverts the signal
+      received, and that the peripheral should invert its input using the
+      INVR registers.
+
+  fsl,dma-info:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    description: |
+      First cell contains the size of DMA buffer chunks, second cell contains
+      the amount of chunks used for the device. Multiplying both numbers is
+      the total size of memory used for receiving data.
+      When not being configured the system will use default settings, which
+      are sensible for most use cases. If you need low latency processing on
+      slow connections this needs to be configured appropriately.
+
+  uart-has-rtscts: true
+
+  rs485-rts-delay: true
+  rs485-rts-active-low: true
+  rs485-rx-during-tx: true
+  linux,rs485-enabled-at-boot-time: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    aliases {
+        serial0 = &uart1;
+    };
+
+    uart1: serial@73fbc000 {
+        compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+        reg = <0x73fbc000 0x4000>;
+        interrupts = <31>;
+        uart-has-rtscts;
+        fsl,dte-mode;
+    };
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
deleted file mode 100644
index c904e2e68332..000000000000
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Freescale low power universal asynchronous receiver/transmitter (lpuart)
-
-Required properties:
-- compatible :
-  - "fsl,vf610-lpuart" for lpuart compatible with the one integrated
-    on Vybrid vf610 SoC with 8-bit register organization
-  - "fsl,ls1021a-lpuart" for lpuart compatible with the one integrated
-    on LS1021A SoC with 32-bit big-endian register organization
-  - "fsl,imx7ulp-lpuart" for lpuart compatible with the one integrated
-    on i.MX7ULP SoC with 32-bit little-endian register organization
-  - "fsl,imx8qxp-lpuart" for lpuart compatible with the one integrated
-    on i.MX8QXP SoC with 32-bit little-endian register organization
-  - "fsl,imx8qm-lpuart" for lpuart compatible with the one integrated
-    on i.MX8QM SoC with 32-bit little-endian register organization
-- reg : Address and length of the register set for the device
-- interrupts : Should contain uart interrupt
-- clocks : phandle + clock specifier pairs, one for each entry in clock-names
-- clock-names : For vf610/ls1021a/imx7ulp, "ipg" clock is for uart bus/baud
-  clock. For imx8qxp lpuart, "ipg" clock is bus clock that is used to access
-  lpuart controller registers, it also requires "baud" clock for module to
-  receive/transmit data.
-
-Optional properties:
-- dmas: A list of two dma specifiers, one for each entry in dma-names.
-- dma-names: should contain "tx" and "rx".
-- rs485-rts-active-low, linux,rs485-enabled-at-boot-time: see rs485.txt
-
-Note: Optional properties for DMA support. Write them both or both not.
-
-Example:
-
-uart0: serial@40027000 {
-		compatible = "fsl,vf610-lpuart";
-		reg = <0x40027000 0x1000>;
-		interrupts = <0 61 0x00>;
-		clocks = <&clks VF610_CLK_UART0>;
-		clock-names = "ipg";
-		dmas = <&edma0 0 2>,
-			<&edma0 0 3>;
-		dma-names = "rx","tx";
-	};
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
new file mode 100644
index 000000000000..30eaa62e1aed
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale low power universal asynchronous receiver/transmitter (lpuart)
+
+maintainers:
+  - Fugang Duan <fugang.duan@nxp.com>
+
+allOf:
+  - $ref: "rs485.yaml"
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-lpuart
+          - fsl,ls1021a-lpuart
+          - fsl,ls1028a-lpuart
+          - fsl,imx7ulp-lpuart
+          - fsl,imx8qxp-lpuart
+          - fsl,imxrt1050-lpuart
+      - items:
+          - enum:
+              - fsl,imx93-lpuart
+              - fsl,imx8ulp-lpuart
+          - const: fsl,imx7ulp-lpuart
+      - items:
+          - enum:
+              - fsl,imx8qm-lpuart
+              - fsl,imx8dxl-lpuart
+          - const: fsl,imx8qxp-lpuart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: ipg clock
+      - description: baud clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: baud
+    minItems: 1
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  rs485-rts-active-low: true
+  linux,rs485-enabled-at-boot-time: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    serial@40027000 {
+        compatible = "fsl,vf610-lpuart";
+        reg = <0x40027000 0x1000>;
+        interrupts = <0 61 0x00>;
+        clocks = <&clks VF610_CLK_UART0>;
+        clock-names = "ipg";
+        dmas = <&edma0 0 2>, <&edma0 0 3>;
+        dma-names = "rx","tx";
+    };
diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt
deleted file mode 100644
index 5c96d41899f1..000000000000
--- a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale MXS Application UART (AUART)
-
-Required properties for all SoCs:
-- compatible : Should be one of fallowing variants:
-	"fsl,imx23-auart" - Freescale i.MX23
-	"fsl,imx28-auart" - Freescale i.MX28
-	"alphascale,asm9260-auart" - Alphascale ASM9260
-- reg : Address and length of the register set for the device
-- interrupts : Should contain the auart interrupt numbers
-- dmas: DMA specifier, consisting of a phandle to DMA controller node
-  and AUART DMA channel ID.
-  Refer to dma.txt and fsl-mxs-dma.txt for details.
-- dma-names: "rx" for RX channel, "tx" for TX channel.
-
-Required properties for "alphascale,asm9260-auart":
-- clocks : the clocks feeding the watchdog timer. See clock-bindings.txt
-- clock-names : should be set to
-	"mod" - source for tick counter.
-	"ahb" - ahb gate.
-
-Optional properties:
-- uart-has-rtscts : Indicate the UART has RTS and CTS lines
-  for hardware flow control,
-	it also means you enable the DMA support for this UART.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
-  line respectively. It will use specified PIO instead of the peripheral
-  function pin for the USART feature.
-  If unsure, don't specify this property.
-
-Example:
-auart0: serial@8006a000 {
-	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-	reg = <0x8006a000 0x2000>;
-	interrupts = <112>;
-	dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-	dma-names = "rx", "tx";
-	cts-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-};
-
-Note: Each auart port should have an alias correctly numbered in "aliases"
-node.
-
-Example:
-
-aliases {
-	serial0 = &auart0;
-	serial1 = &auart1;
-	serial2 = &auart2;
-	serial3 = &auart3;
-	serial4 = &auart4;
-};
diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
new file mode 100644
index 000000000000..14c7594c88c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl-mxs-auart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS Application UART (AUART)
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+  - $ref: "serial.yaml"
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-auart
+      - fsl,imx28-auart
+      - alphascale,asm9260-auart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clocks:
+    items:
+      - description: mod clock
+      - description: ahb clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: mod
+      - const: ahb
+    minItems: 1
+
+  uart-has-rtscts: true
+  rts-gpios: true
+  cts-gpios: true
+  dtr-gpios: true
+  dsr-gpios: true
+  rng-gpios: true
+  dcd-gpios: true
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - alphascale,asm9260-auart
+then:
+  required:
+    - clocks
+    - clock-names
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    aliases {
+        serial0 = &auart0;
+    };
+
+    auart0: serial@8006a000 {
+        compatible = "fsl,imx28-auart";
+        reg = <0x8006a000 0x2000>;
+        interrupts = <112>;
+        dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+        dma-names = "rx", "tx";
+        clocks = <&clks 45>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
deleted file mode 100644
index 24ed8769f4af..000000000000
--- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Ingenic SoC UART
-
-Required properties:
-- compatible : One of:
-  - "ingenic,jz4740-uart",
-  - "ingenic,jz4760-uart",
-  - "ingenic,jz4770-uart",
-  - "ingenic,jz4775-uart",
-  - "ingenic,jz4780-uart",
-  - "ingenic,x1000-uart".
-- reg : offset and length of the register set for the device.
-- interrupts : should contain uart interrupt.
-- clocks : phandles to the module & baud clocks.
-- clock-names: tuple listing input clock names.
-	Required elements: "baud", "module"
-
-Example:
-
-uart0: serial@10030000 {
-	compatible = "ingenic,jz4740-uart";
-	reg = <0x10030000 0x100>;
-
-	interrupt-parent = <&intc>;
-	interrupts = <9>;
-
-	clocks = <&ext>, <&cgu JZ4740_CLK_UART0>;
-	clock-names = "baud", "module";
-};
diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
new file mode 100644
index 000000000000..9ca7a18ecd8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/ingenic,uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs UART controller devicetree bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  $nodename:
+    pattern: "^serial@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-uart
+          - ingenic,jz4760-uart
+          - ingenic,jz4780-uart
+          - ingenic,x1000-uart
+      - items:
+          - enum:
+              - ingenic,jz4770-uart
+              - ingenic,jz4775-uart
+          - const: ingenic,jz4760-uart
+      - items:
+          - const: ingenic,jz4725b-uart
+          - const: ingenic,jz4740-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Baud clock
+      - description: UART module clock
+
+  clock-names:
+    items:
+      - const: baud
+      - const: module
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    #include <dt-bindings/dma/jz4780-dma.h>
+    #include <dt-bindings/gpio/gpio.h>
+    serial@10032000 {
+      compatible = "ingenic,jz4780-uart";
+      reg = <0x10032000 0x100>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <49>;
+
+      clocks = <&ext>, <&cgu JZ4780_CLK_UART2>;
+      clock-names = "baud", "module";
+
+      dmas = <&dma JZ4780_DMA_UART2_RX 0xffffffff>,
+             <&dma JZ4780_DMA_UART2_TX 0xffffffff>;
+      dma-names = "rx", "tx";
+
+      bluetooth {
+        compatible = "brcm,bcm4330-bt";
+        reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>;
+        vbat-supply = <&wlan0_power>;
+        device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>;
+        host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>;
+        shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/serial/litex,liteuart.yaml b/Documentation/devicetree/bindings/serial/litex,liteuart.yaml
new file mode 100644
index 000000000000..c4f1f489dc2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/litex,liteuart.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/litex,liteuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteUART serial controller
+
+maintainers:
+  - Karol Gugala <kgugala@antmicro.com>
+  - Mateusz Holenko <mholenko@antmicro.com>
+
+description: |
+  LiteUART serial controller is a part of the LiteX FPGA SoC builder. It supports
+  multiple CPU architectures, currently including e.g. OpenRISC and RISC-V.
+
+properties:
+  compatible:
+    const: litex,liteuart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    uart0: serial@e0001800 {
+      compatible = "litex,liteuart";
+      reg = <0xe0001800 0x100>;
+      interrupts = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
new file mode 100644
index 000000000000..fe098d98af6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/mediatek,uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+description: |
+  The MediaTek UART is based on the basic 8250 UART and compatible
+  with 16550A, with enhancements for high speed baud rates and
+  support for DMA.
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt6577-uart
+      - items:
+          - enum:
+              - mediatek,mt2701-uart
+              - mediatek,mt2712-uart
+              - mediatek,mt6580-uart
+              - mediatek,mt6582-uart
+              - mediatek,mt6589-uart
+              - mediatek,mt6755-uart
+              - mediatek,mt6765-uart
+              - mediatek,mt6779-uart
+              - mediatek,mt6795-uart
+              - mediatek,mt6797-uart
+              - mediatek,mt7622-uart
+              - mediatek,mt7623-uart
+              - mediatek,mt7629-uart
+              - mediatek,mt7986-uart
+              - mediatek,mt8127-uart
+              - mediatek,mt8135-uart
+              - mediatek,mt8173-uart
+              - mediatek,mt8183-uart
+              - mediatek,mt8186-uart
+              - mediatek,mt8188-uart
+              - mediatek,mt8192-uart
+              - mediatek,mt8195-uart
+              - mediatek,mt8516-uart
+          - const: mediatek,mt6577-uart
+
+  reg:
+    description: The base address of the UART register bank
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: The clock the baudrate is derived from
+      - description: The bus clock for register accesses
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: baud
+      - const: bus
+
+  dmas:
+    items:
+      - description: phandle to TX DMA
+      - description: phandle to RX DMA
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description:
+      The UART interrupt and optionally the RX in-band wakeup interrupt.
+    minItems: 1
+    items:
+      - const: uart
+      - const: wakeup
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    serial@11006000 {
+        compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
+        reg = <0x11006000 0x400>;
+        interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+                     <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "uart", "wakeup";
+        clocks = <&uart_clk>, <&bus_clk>;
+        clock-names = "baud", "bus";
+        pinctrl-0 = <&uart_pin>;
+        pinctrl-1 = <&uart_pin_sleep>;
+        pinctrl-names = "default", "sleep";
+    };
diff --git a/Documentation/devicetree/bindings/serial/mrvl-serial.txt b/Documentation/devicetree/bindings/serial/mrvl-serial.txt
deleted file mode 100644
index d744340de887..000000000000
--- a/Documentation/devicetree/bindings/serial/mrvl-serial.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-PXA UART controller
-
-Required properties:
-- compatible : should be "mrvl,mmp-uart" or "mrvl,pxa-uart".
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
deleted file mode 100644
index 3a3b57079f0d..000000000000
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* MediaTek Universal Asynchronous Receiver/Transmitter (UART)
-
-Required properties:
-- compatible should contain:
-  * "mediatek,mt2701-uart" for MT2701 compatible UARTS
-  * "mediatek,mt2712-uart" for MT2712 compatible UARTS
-  * "mediatek,mt6580-uart" for MT6580 compatible UARTS
-  * "mediatek,mt6582-uart" for MT6582 compatible UARTS
-  * "mediatek,mt6589-uart" for MT6589 compatible UARTS
-  * "mediatek,mt6755-uart" for MT6755 compatible UARTS
-  * "mediatek,mt6765-uart" for MT6765 compatible UARTS
-  * "mediatek,mt6779-uart" for MT6779 compatible UARTS
-  * "mediatek,mt6795-uart" for MT6795 compatible UARTS
-  * "mediatek,mt6797-uart" for MT6797 compatible UARTS
-  * "mediatek,mt7622-uart" for MT7622 compatible UARTS
-  * "mediatek,mt7623-uart" for MT7623 compatible UARTS
-  * "mediatek,mt7629-uart" for MT7629 compatible UARTS
-  * "mediatek,mt8127-uart" for MT8127 compatible UARTS
-  * "mediatek,mt8135-uart" for MT8135 compatible UARTS
-  * "mediatek,mt8173-uart" for MT8173 compatible UARTS
-  * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
-  * "mediatek,mt8516-uart" for MT8516 compatible UARTS
-  * "mediatek,mt6577-uart" for MT6577 and all of the above
-
-- reg: The base address of the UART register bank.
-
-- interrupts:
-  index 0: an interrupt specifier for the UART controller itself
-  index 1: optional, an interrupt specifier with edge sensitivity on Rx pin to
-           support Rx in-band wake up. If one would like to use this feature,
-           one must create an addtional pinctrl to reconfigure Rx pin to normal
-           GPIO before suspend.
-
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names:
-  - "baud": The clock the baudrate is derived from
-  - "bus": The bus clock for register accesses (optional)
-
-For compatibility with older device trees an unnamed clock is used for the
-baud clock if the baudclk does not exist. Do not use this for new designs.
-
-Example:
-
-	uart0: serial@11006000 {
-		compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
-		reg = <0x11006000 0x400>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>;
-		clocks = <&uart_clk>, <&bus_clk>;
-		clock-names = "baud", "bus";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&uart_pin>;
-		pinctrl-1 = <&uart_pin_sleep>;
-	};
diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt
index b7e0e32b9ac6..a062bbca532c 100644
--- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt
@@ -5,16 +5,19 @@ Required properties:
 - compatible:
     - "marvell,armada-3700-uart" for the standard variant of the UART
       (32 bytes FIFO, no DMA, level interrupts, 8-bit access to the
-      FIFO, baudrate limited to 230400).
+      FIFO), called also UART1.
     - "marvell,armada-3700-uart-ext" for the extended variant of the
       UART (128 bytes FIFO, DMA, front interrupts, 8-bit or 32-bit
-      accesses to the FIFO, baudrate unlimited by the dividers).
+      accesses to the FIFO), called also UART2.
 - reg: offset and length of the register set for the device.
 - clocks: UART reference clock used to derive the baudrate. If no clock
       is provided (possible only with the "marvell,armada-3700-uart"
       compatible string for backward compatibility), it will only work
       if the baudrate was initialized by the bootloader and no baudrate
-      change will then be possible.
+      change will then be possible. When provided it should be UART1-clk
+      for standard variant of UART and UART2-clk for extended variant
+      of UART. TBG clock (with UART TBG divisors d1=d2=1) or xtal clock
+      should not be used and are supported only for backward compatibility.
 - interrupts:
     - Must contain three elements for the standard variant of the IP
       (marvell,armada-3700-uart): "uart-sum", "uart-tx" and "uart-rx",
@@ -33,8 +36,8 @@ Required properties:
 Example:
 	uart0: serial@12000 {
 		compatible = "marvell,armada-3700-uart";
-		reg = <0x12000 0x200>;
-		clocks = <&xtalclk>;
+		reg = <0x12000 0x18>;
+		clocks = <&uartclk 0>;
 		interrupts =
 		<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 		<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
@@ -45,7 +48,7 @@ Example:
 	uart1: serial@12200 {
 		compatible = "marvell,armada-3700-uart-ext";
 		reg = <0x12200 0x30>;
-		clocks = <&xtalclk>;
+		clocks = <&uartclk 1>;
 		interrupts =
 		<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
 		<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt
deleted file mode 100644
index 085a8591accd..000000000000
--- a/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-NVIDIA Tegra Combined UART (TCU)
-
-The TCU is a system for sharing a hardware UART instance among multiple
-systems within the Tegra SoC. It is implemented through a mailbox-
-based protocol where each "virtual UART" has a pair of mailboxes, one
-for transmitting and one for receiving, that is used to communicate
-with the hardware implementing the TCU.
-
-Required properties:
-- name : Should be tcu
-- compatible
-    Array of strings
-    One of:
-    - "nvidia,tegra194-tcu"
-- mbox-names:
-    "rx" - Mailbox for receiving data from hardware UART
-    "tx" - Mailbox for transmitting data to hardware UART
-- mboxes: Mailboxes corresponding to the mbox-names.
-
-This node is a mailbox consumer. See the following files for details of
-the mailbox subsystem, and the specifiers implemented by the relevant
-provider(s):
-
-- .../mailbox/mailbox.txt
-- .../mailbox/nvidia,tegra186-hsp.txt
-
-Example bindings:
------------------
-
-tcu: tcu {
-	compatible = "nvidia,tegra194-tcu";
-	mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM 0>,
-	         <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM 1>;
-	mbox-names = "rx", "tx";
-};
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.yaml b/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.yaml
new file mode 100644
index 000000000000..e2d111b3e0b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/nvidia,tegra194-tcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Combined UART (TCU)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+description:
+  The TCU is a system for sharing a hardware UART instance among multiple
+  systems within the Tegra SoC. It is implemented through a mailbox-
+  based protocol where each "virtual UART" has a pair of mailboxes, one
+  for transmitting and one for receiving, that is used to communicate
+  with the hardware implementing the TCU.
+
+properties:
+  $nodename:
+    pattern: "^serial(@.*)?$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra194-tcu
+      - items:
+          - enum:
+              - nvidia,tegra234-tcu
+          - const: nvidia,tegra194-tcu
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  mboxes:
+    description: |
+      List of phandles to mailbox channels used for receiving and
+      transmitting data from and to the hardware UART.
+    items:
+      - description: mailbox for receiving data from hardware UART
+      - description: mailbox for transmitting data to hardware UART
+
+required:
+  - compatible
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+
+    tcu: serial {
+        compatible = "nvidia,tegra194-tcu";
+        mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM 0>,
+                 <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM 1>;
+        mbox-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
index c1091a923a89..0fa8e3e43bf8 100644
--- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -21,6 +21,8 @@ Optional properties:
   the second cell is used to specify the GPIO polarity:
     0 = active high,
     1 = active low.
+- irda-mode-ports: An array that lists the indices of the port that
+		   should operate in IrDA mode.
 
 Example:
         sc16is750: sc16is750@51 {
@@ -55,6 +57,8 @@ Optional properties:
   the second cell is used to specify the GPIO polarity:
     0 = active high,
     1 = active low.
+- irda-mode-ports: An array that lists the indices of the port that
+		   should operate in IrDA mode.
 
 Example:
 	sc16is750: sc16is750@0 {
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
deleted file mode 100644
index dcba86b0a0d0..000000000000
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-OMAP UART controller
-
-Required properties:
-- compatible : should be "ti,j721e-uart", "ti,am654-uart" for J721E controllers
-- compatible : should be "ti,am654-uart" for AM654 controllers
-- compatible : should be "ti,omap2-uart" for OMAP2 controllers
-- compatible : should be "ti,omap3-uart" for OMAP3 controllers
-- compatible : should be "ti,omap4-uart" for OMAP4 controllers
-- compatible : should be "ti,am4372-uart" for AM437x controllers
-- compatible : should be "ti,am3352-uart" for AM335x controllers
-- compatible : should be "ti,dra742-uart" for DRA7x controllers
-- reg : address and length of the register space
-- interrupts or interrupts-extended : Should contain the uart interrupt
-                                      specifier or both the interrupt
-                                      controller phandle and interrupt
-                                      specifier.
-- ti,hwmods : Must be "uart<n>", n being the instance number (1-based)
-
-Optional properties:
-- clock-frequency : frequency of the clock input to the UART
-- dmas : DMA specifier, consisting of a phandle to the DMA controller
-         node and a DMA channel number.
-- dma-names : "rx" for receive channel, "tx" for transmit channel.
-- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
-- rs485-rts-active-high: drive RTS high when sending (default is low).
-- clocks: phandle to the functional clock as per
-  Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Example:
-
-                uart4: serial@49042000 {
-                        compatible = "ti,omap3-uart";
-                        reg = <0x49042000 0x400>;
-                        interrupts = <80>;
-                        dmas = <&sdma 81 &sdma 82>;
-                        dma-names = "tx", "rx";
-                        ti,hwmods = "uart4";
-                        clock-frequency = <48000000>;
-                };
diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
index 1a64d59152aa..80af72859876 100644
--- a/Documentation/devicetree/bindings/serial/pl011.yaml
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Rob Herring <robh@kernel.org>
 
 allOf:
-  - $ref: /schemas/serial.yaml#
+  - $ref: serial.yaml#
 
 # Need a custom select here or 'arm,primecell' will match on lots of nodes
 select:
@@ -19,19 +19,14 @@ select:
       contains:
         enum:
           - arm,pl011
-          - zte,zx296702-uart
   required:
     - compatible
 
 properties:
   compatible:
-    oneOf:
-      - items:
-          - const: arm,pl011
-          - const: arm,primecell
-      - items:
-          - const: zte,zx296702-uart
-          - const: arm,primecell
+    items:
+      - const: arm,pl011
+      - const: arm,primecell
 
   reg:
     maxItems: 1
@@ -88,17 +83,22 @@ properties:
     description:
       Rate at which poll occurs when auto-poll is set.
       default 100ms.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 100
+    default: 100
 
   poll-timeout-ms:
     description:
       Poll timeout when auto-poll is set, default
       3000ms.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 3000
+    default: 3000
+
+  resets:
+    maxItems: 1
+
+  reg-io-width:
+    description:
+      The size (in bytes) of the IO accesses that should be performed
+      on the device.
+    enum: [1, 4]
 
 required:
   - compatible
@@ -109,7 +109,7 @@ dependencies:
   poll-rate-ms: [ auto-poll ]
   poll-timeout-ms: [ auto-poll ]
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt
deleted file mode 100644
index 7d65126bd1d7..000000000000
--- a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Qualcomm Atheros AR9330 High-Speed UART
-
-Required properties:
-
-- compatible: Must be "qca,ar9330-uart"
-
-- reg: Specifies the physical base address of the controller and
-  the length of the memory mapped region.
-
-- interrupts: Specifies the interrupt source of the parent interrupt
-  controller. The format of the interrupt specifier depends on the
-  parent interrupt controller.
-
-Additional requirements:
-
-  Each UART port must have an alias correctly numbered in "aliases"
-  node.
-
-Example:
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	uart0: uart@18020000 {
-		compatible = "qca,ar9330-uart";
-		reg = <0x18020000 0x14>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <3>;
-	};
diff --git a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml
new file mode 100644
index 000000000000..a644e5af12b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qca,ar9330-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR9330 High-Speed UART
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: qca,ar9330-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: uart
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@18020000 {
+      compatible = "qca,ar9330-uart";
+      reg = <0x18020000 0x14>;
+      clocks = <&ref>;
+      clock-names = "uart";
+      interrupt-parent = <&intc>;
+      interrupts = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
deleted file mode 100644
index 9d098cf73b53..000000000000
--- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-* MSM Serial UARTDM
-
-The MSM serial UARTDM hardware is designed for high-speed use cases where the
-transmit and/or receive channels can be offloaded to a dma-engine. From a
-software perspective it's mostly compatible with the MSM serial UART except
-that it supports reading and writing multiple characters at a time.
-
-Required properties:
-- compatible: Should contain at least "qcom,msm-uartdm".
-              A more specific property should be specified as follows depending
-	      on the version:
-		"qcom,msm-uartdm-v1.1"
-		"qcom,msm-uartdm-v1.2"
-		"qcom,msm-uartdm-v1.3"
-		"qcom,msm-uartdm-v1.4"
-- reg: Should contain UART register locations and lengths. The first
-       register shall specify the main control registers. An optional second
-       register location shall specify the GSBI control region.
-       "qcom,msm-uartdm-v1.3" is the only compatible value that might
-       need the GSBI control region.
-- interrupts: Should contain UART interrupt.
-- clocks: Should contain the core clock and the AHB clock.
-- clock-names: Should be "core" for the core clock and "iface" for the
-	       AHB clock.
-
-Optional properties:
-- dmas: Should contain dma specifiers for transmit and receive channels
-- dma-names: Should contain "tx" for transmit and "rx" for receive channels
-- qcom,tx-crci: Identificator <u32> for Client Rate Control Interface to be
-           used with TX DMA channel. Required when using DMA for transmission
-           with UARTDM v1.3 and below.
-- qcom,rx-crci: Identificator <u32> for Client Rate Control Interface to be
-           used with RX DMA channel. Required when using DMA for reception
-           with UARTDM v1.3 and below.
-
-Note: Aliases may be defined to ensure the correct ordering of the UARTs.
-The alias serialN will result in the UART being assigned port N.  If any
-serialN alias exists, then an alias must exist for each enabled UART.  The
-serialN aliases should be in a .dts file instead of in a .dtsi file.
-
-Examples:
-
-- A uartdm v1.4 device with dma capabilities.
-
-	serial@f991e000 {
-		compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-		reg = <0xf991e000 0x1000>;
-		interrupts = <0 108 0x0>;
-		clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
-		clock-names = "core", "iface";
-		dmas = <&dma0 0>, <&dma0 1>;
-		dma-names = "tx", "rx";
-	};
-
-- A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
-
-	serial@19c40000 {
-		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-		reg = <0x19c40000 0x1000>,
-		<0x19c00000 0x1000>;
-		interrupts = <0 195 0x0>;
-		clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
-		clock-names = "core", "iface";
-	};
-
-- serialN alias.
-
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartc;
-		serial2 = &uartb;
-	};
-
-	uarta: serial@12490000 {
-	};
-
-	uartb: serial@16340000 {
-	};
-
-	uartc: serial@1a240000 {
-	};
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
new file mode 100644
index 000000000000..484b9a51f6a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qcom,msm-uartdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM Serial UARTDM
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  The MSM serial UARTDM hardware is designed for high-speed use cases where the
+  transmit and/or receive channels can be offloaded to a dma-engine. From a
+  software perspective it's mostly compatible with the MSM serial UART except
+  that it supports reading and writing multiple characters at a time.
+
+  Note:: Aliases may be defined to ensure the correct ordering of the UARTs.
+  The alias serialN will result in the UART being assigned port N.  If any
+  serialN alias exists, then an alias must exist for each enabled UART.  The
+  serialN aliases should be in a .dts file instead of in a .dtsi file.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,msm-uartdm-v1.1
+          - qcom,msm-uartdm-v1.2
+          - qcom,msm-uartdm-v1.3
+          - qcom,msm-uartdm-v1.4
+      - const: qcom,msm-uartdm
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  qcom,rx-crci:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Identificator for Client Rate Control Interface to be used with RX DMA
+      channel. Required when using DMA for reception with UARTDM v1.3 and
+      below.
+
+  qcom,tx-crci:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Identificator for Client Rate Control Interface to be used with TX DMA
+      channel. Required when using DMA for transmission with UARTDM v1.3 and
+      below.
+
+  reg:
+    minItems: 1
+    items:
+      - description: Main control registers
+      - description: An optional second register location shall specify the GSBI control region.
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,msm-uartdm-v1.3
+    then:
+      properties:
+        reg:
+          minItems: 2
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    serial@f991e000 {
+        compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+        reg = <0xf991e000 0x1000>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
+        clock-names = "core", "iface";
+        dmas = <&dma0 0>, <&dma0 1>;
+        dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
new file mode 100644
index 000000000000..05a6999808d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Geni based QUP UART interface
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,geni-uart
+      - qcom,geni-debug-uart
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: se
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: qup-core
+      - const: qup-config
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: UART core irq
+      - description: Wakeup irq (RX GPIO)
+
+  operating-points-v2: true
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+
+    serial@a88000 {
+        compatible = "qcom,geni-uart";
+        reg = <0xa88000 0x7000>;
+        interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-0 = <&qup_uart0_default>;
+        pinctrl-names = "default";
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+        interconnect-names = "qup-core", "qup-config";
+    };
+...
diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
deleted file mode 100644
index a08df97a69e6..000000000000
--- a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-RDA Micro UART
-
-Required properties:
-- compatible :  "rda,8810pl-uart" for RDA8810PL SoCs.
-- reg        :  Offset and length of the register set for the device.
-- interrupts :  Should contain UART interrupt.
-- clocks     :  Phandle to the input clock.
-
-
-Example:
-
-		uart2: serial@20a90000 {
-			compatible = "rda,8810pl-uart";
-			reg = <0x20a90000 0x1000>;
-			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_clk>;
-		};
diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml
new file mode 100644
index 000000000000..5f4ed8221270
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/rda,8810pl-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro UART Interface
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: rda,8810pl-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    uart3: serial@20a90000 {
+      compatible = "rda,8810pl-uart";
+      reg = <0x20a90000 0x1000>;
+      interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&uart_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
new file mode 100644
index 000000000000..b25aca733b72
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,em-uart.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas EMMA Mobile UART Interface
+
+maintainers:
+  - Magnus Damm <magnus.damm@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a09g011-uart    # RZ/V2M
+          - const: renesas,em-uart        # generic EMMA Mobile compatible UART
+
+      - items:
+          - const: renesas,em-uart        # generic EMMA Mobile compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: UART functional clock
+      - description: Internal clock to access the registers
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sclk
+      - const: pclk
+
+allOf:
+  - $ref: serial.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g011-uart
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    uart0: serial@e1020000 {
+            compatible = "renesas,em-uart";
+            reg = <0xe1020000 0x38>;
+            interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&usia_u0_sclk>;
+            clock-names = "sclk";
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
new file mode 100644
index 000000000000..1957b9d782e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,hscif.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas High Speed Serial Communication Interface with FIFO (HSCIF)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,hscif-r8a7778      # R-Car M1
+              - renesas,hscif-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-hscif # R-Car Gen1
+          - const: renesas,hscif           # generic HSCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,hscif-r8a7742      # RZ/G1H
+              - renesas,hscif-r8a7743      # RZ/G1M
+              - renesas,hscif-r8a7744      # RZ/G1N
+              - renesas,hscif-r8a7745      # RZ/G1E
+              - renesas,hscif-r8a77470     # RZ/G1C
+              - renesas,hscif-r8a7790      # R-Car H2
+              - renesas,hscif-r8a7791      # R-Car M2-W
+              - renesas,hscif-r8a7792      # R-Car V2H
+              - renesas,hscif-r8a7793      # R-Car M2-N
+              - renesas,hscif-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-hscif # R-Car Gen2 and RZ/G1
+          - const: renesas,hscif           # generic HSCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,hscif-r8a774a1     # RZ/G2M
+              - renesas,hscif-r8a774b1     # RZ/G2N
+              - renesas,hscif-r8a774c0     # RZ/G2E
+              - renesas,hscif-r8a774e1     # RZ/G2H
+              - renesas,hscif-r8a7795      # R-Car H3
+              - renesas,hscif-r8a7796      # R-Car M3-W
+              - renesas,hscif-r8a77961     # R-Car M3-W+
+              - renesas,hscif-r8a77965     # R-Car M3-N
+              - renesas,hscif-r8a77970     # R-Car V3M
+              - renesas,hscif-r8a77980     # R-Car V3H
+              - renesas,hscif-r8a77990     # R-Car E3
+              - renesas,hscif-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-hscif # R-Car Gen3 and RZ/G2
+          - const: renesas,hscif           # generic HSCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,hscif-r8a779a0     # R-Car V3U
+              - renesas,hscif-r8a779f0     # R-Car S4-8
+              - renesas,hscif-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-hscif # R-Car Gen4
+          - const: renesas,hscif           # generic HSCIF compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum:
+        - fck # UART functional clock
+        - hsck # optional external clock input
+        - brg_int # optional internal clock source for BRG frequency divider
+        - scif_clk # optional external clock source for BRG frequency divider
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen2-hscif
+          - renesas,rcar-gen3-hscif
+          - renesas,rcar-gen4-hscif
+then:
+  required:
+    - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    aliases {
+            serial1 = &hscif1;
+    };
+
+    hscif1: serial@e6550000 {
+            compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
+                         "renesas,hscif";
+            reg = <0xe6550000 96>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+                     <&scif_clk>;
+            clock-names = "fck", "brg_int", "scif_clk";
+            dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
+            dma-names = "tx", "rx", "tx", "rx";
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 519>;
+            uart-has-rtscts;
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
deleted file mode 100644
index a5edf4b70c7a..000000000000
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ /dev/null
@@ -1,150 +0,0 @@
-* Renesas SH-Mobile Serial Communication Interface
-
-Required properties:
-
-  - compatible: Must contain one or more of the following:
-
-    - "renesas,scif-r7s72100" for R7S72100 (RZ/A1H) SCIF compatible UART.
-    - "renesas,scif-r7s9210" for R7S9210 (RZ/A2) SCIF compatible UART.
-    - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART.
-    - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
-    - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
-    - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART.
-    - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART.
-    - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART.
-    - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART.
-    - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART.
-    - "renesas,scif-r8a7744" for R8A7744 (RZ/G1N) SCIF compatible UART.
-    - "renesas,scifa-r8a7744" for R8A7744 (RZ/G1N) SCIFA compatible UART.
-    - "renesas,scifb-r8a7744" for R8A7744 (RZ/G1N) SCIFB compatible UART.
-    - "renesas,hscif-r8a7744" for R8A7744 (RZ/G1N) HSCIF compatible UART.
-    - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART.
-    - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART.
-    - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART.
-    - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART.
-    - "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART.
-    - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART.
-    - "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART.
-    - "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART.
-    - "renesas,scif-r8a774b1" for R8A774B1 (RZ/G2N) SCIF compatible UART.
-    - "renesas,hscif-r8a774b1" for R8A774B1 (RZ/G2N) HSCIF compatible UART.
-    - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART.
-    - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART.
-    - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
-    - "renesas,hscif-r8a7778" for R8A7778 (R-Car M1) HSCIF compatible UART.
-    - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
-    - "renesas,hscif-r8a7779" for R8A7779 (R-Car H1) HSCIF compatible UART.
-    - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
-    - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
-    - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART.
-    - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART.
-    - "renesas,scif-r8a7791" for R8A7791 (R-Car M2-W) SCIF compatible UART.
-    - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2-W) SCIFA compatible UART.
-    - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2-W) SCIFB compatible UART.
-    - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2-W) HSCIF compatible UART.
-    - "renesas,scif-r8a7792" for R8A7792 (R-Car V2H) SCIF compatible UART.
-    - "renesas,hscif-r8a7792" for R8A7792 (R-Car V2H) HSCIF compatible UART.
-    - "renesas,scif-r8a7793" for R8A7793 (R-Car M2-N) SCIF compatible UART.
-    - "renesas,scifa-r8a7793" for R8A7793 (R-Car M2-N) SCIFA compatible UART.
-    - "renesas,scifb-r8a7793" for R8A7793 (R-Car M2-N) SCIFB compatible UART.
-    - "renesas,hscif-r8a7793" for R8A7793 (R-Car M2-N) HSCIF compatible UART.
-    - "renesas,scif-r8a7794" for R8A7794 (R-Car E2) SCIF compatible UART.
-    - "renesas,scifa-r8a7794" for R8A7794 (R-Car E2) SCIFA compatible UART.
-    - "renesas,scifb-r8a7794" for R8A7794 (R-Car E2) SCIFB compatible UART.
-    - "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART.
-    - "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART.
-    - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
-    - "renesas,scif-r8a7796" for R8A77960 (R-Car M3-W) SCIF compatible UART.
-    - "renesas,hscif-r8a7796" for R8A77960 (R-Car M3-W) HSCIF compatible UART.
-    - "renesas,scif-r8a77961" for R8A77961 (R-Car M3-W+) SCIF compatible UART.
-    - "renesas,hscif-r8a77961" for R8A77961 (R-Car M3-W+) HSCIF compatible UART.
-    - "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART.
-    - "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART.
-    - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
-    - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
-    - "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART.
-    - "renesas,hscif-r8a77980" for R8A77980 (R-Car V3H) HSCIF compatible UART.
-    - "renesas,scif-r8a77990" for R8A77990 (R-Car E3) SCIF compatible UART.
-    - "renesas,hscif-r8a77990" for R8A77990 (R-Car E3) HSCIF compatible UART.
-    - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART.
-    - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART.
-    - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
-    - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
-    - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART,
-    - "renesas,rcar-gen2-scif" for R-Car Gen2 and RZ/G1 SCIF compatible UART,
-    - "renesas,rcar-gen3-scif" for R-Car Gen3 and RZ/G2 SCIF compatible UART,
-    - "renesas,rcar-gen2-scifa" for R-Car Gen2 and RZ/G1 SCIFA compatible UART,
-    - "renesas,rcar-gen2-scifb" for R-Car Gen2 and RZ/G1 SCIFB compatible UART,
-    - "renesas,rcar-gen1-hscif" for R-Car Gen1 HSCIF compatible UART,
-    - "renesas,rcar-gen2-hscif" for R-Car Gen2 and RZ/G1 HSCIF compatible UART,
-    - "renesas,rcar-gen3-hscif" for R-Car Gen3 and RZ/G2 HSCIF compatible UART,
-    - "renesas,scif" for generic SCIF compatible UART.
-    - "renesas,scifa" for generic SCIFA compatible UART.
-    - "renesas,scifb" for generic SCIFB compatible UART.
-    - "renesas,hscif" for generic HSCIF compatible UART.
-    - "renesas,sci" for generic SCI compatible UART.
-
-    When compatible with the generic version, nodes must list the
-    SoC-specific version corresponding to the platform first, followed by the
-    family-specific and/or generic versions.
-
-  - reg: Base address and length of the I/O registers used by the UART.
-  - interrupts: Must contain one or more interrupt-specifiers for the SCIx.
-                If a single interrupt is expressed, then all events are
-                multiplexed into this single interrupt.
-
-                If multiple interrupts are provided by the hardware, the order
-                in which the interrupts are listed must match order below. Note
-                that some HW interrupt events may be muxed together resulting
-                in duplicate entries.
-                The interrupt order is as follows:
-                  1. Error (ERI)
-                  2. Receive buffer full (RXI)
-                  3. Transmit buffer empty (TXI)
-                  4. Break (BRI)
-                  5. Data Ready (DRI)
-                  6. Transmit End (TEI)
-
-  - clocks: Must contain a phandle and clock-specifier pair for each entry
-    in clock-names.
-  - clock-names: Must contain "fck" for the SCIx UART functional clock.
-    Apart from the divided functional clock, there may be other possible
-    sources for the sampling clock, depending on SCIx variant.
-    On (H)SCI(F) and some SCIFA, an additional clock may be specified:
-      - "hsck" for the optional external clock input (on HSCIF),
-      - "sck" for the optional external clock input (on other variants).
-    On UARTs equipped with a Baud Rate Generator for External Clock (BRG)
-    (some SCIF and HSCIF), additional clocks may be specified:
-      - "brg_int" for the optional internal clock source for the frequency
-	divider (typically the (AXI or SHwy) bus clock),
-      - "scif_clk" for the optional external clock source for the frequency
-	divider (SCIF_CLK).
-
-Note: Each enabled SCIx UART may have an optional "serialN" alias in the
-"aliases" node.
-
-Optional properties:
-  - dmas: Must contain a list of two references to DMA specifiers, one for
-	  transmission, and one for reception.
-  - dma-names: Must contain a list of two DMA names, "tx" and "rx".
-  - {cts,dsr,dcd,rng,rts,dtr}-gpios: Specify GPIOs for modem lines, cfr. the
-    generic serial DT bindings in serial.txt.
-  - uart-has-rtscts: Indicates dedicated lines for RTS/CTS hardware flow
-    control, cfr. the generic serial DT bindings in serial.txt.
-
-Example:
-	aliases {
-		serial0 = &scifa0;
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7790",
-			     "renesas,rcar-gen2-scifa", "renesas,scifa";
-		reg = <0 0xe6c40000 0 64>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
-		clock-names = "fck";
-		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
-		dma-names = "tx", "rx";
-	};
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
new file mode 100644
index 000000000000..bf7708a7a2c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,sci.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Serial Communication Interface
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-sci     # RZ/G2UL
+              - renesas,r9a07g044-sci     # RZ/G2{L,LC}
+              - renesas,r9a07g054-sci     # RZ/V2L
+          - const: renesas,sci            # generic SCI compatible UART
+
+      - items:
+          - const: renesas,sci            # generic SCI compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Error interrupt
+      - description: Receive buffer full interrupt
+      - description: Transmit buffer empty interrupt
+      - description: Transmit end interrupt
+
+  interrupt-names:
+    items:
+      - const: eri
+      - const: rxi
+      - const: txi
+      - const: tei
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - fck # UART functional clock
+        - sck # optional external clock input
+
+  uart-has-rtscts: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a07g043-sci
+          - renesas,r9a07g044-sci
+          - renesas,r9a07g054-sci
+then:
+  properties:
+    resets:
+      maxItems: 1
+
+    power-domains:
+      maxItems: 1
+
+  required:
+    - resets
+    - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    aliases {
+            serial0 = &sci0;
+    };
+
+    sci0: serial@1004d000 {
+            compatible = "renesas,r9a07g044-sci", "renesas,sci";
+            reg = <0x1004d000 0x400>;
+            interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "eri", "rxi", "txi", "tei";
+            clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
+            clock-names = "fck";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_SCI0_RST>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
new file mode 100644
index 000000000000..f930e7f1349f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,scif.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Serial Communication Interface with FIFO (SCIF)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,scif-r7s72100     # RZ/A1H
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,scif-r7s9210      # RZ/A2
+
+      - items:
+          - enum:
+              - renesas,scif-r8a7778      # R-Car M1
+              - renesas,scif-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-scif # R-Car Gen1
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,scif-r8a7742      # RZ/G1H
+              - renesas,scif-r8a7743      # RZ/G1M
+              - renesas,scif-r8a7744      # RZ/G1N
+              - renesas,scif-r8a7745      # RZ/G1E
+              - renesas,scif-r8a77470     # RZ/G1C
+              - renesas,scif-r8a7790      # R-Car H2
+              - renesas,scif-r8a7791      # R-Car M2-W
+              - renesas,scif-r8a7792      # R-Car V2H
+              - renesas,scif-r8a7793      # R-Car M2-N
+              - renesas,scif-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-scif # R-Car Gen2 and RZ/G1
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,scif-r8a774a1     # RZ/G2M
+              - renesas,scif-r8a774b1     # RZ/G2N
+              - renesas,scif-r8a774c0     # RZ/G2E
+              - renesas,scif-r8a774e1     # RZ/G2H
+              - renesas,scif-r8a7795      # R-Car H3
+              - renesas,scif-r8a7796      # R-Car M3-W
+              - renesas,scif-r8a77961     # R-Car M3-W+
+              - renesas,scif-r8a77965     # R-Car M3-N
+              - renesas,scif-r8a77970     # R-Car V3M
+              - renesas,scif-r8a77980     # R-Car V3H
+              - renesas,scif-r8a77990     # R-Car E3
+              - renesas,scif-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-scif # R-Car Gen3 and RZ/G2
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,scif-r8a779a0     # R-Car V3U
+              - renesas,scif-r8a779f0     # R-Car S4-8
+          - const: renesas,rcar-gen4-scif # R-Car Gen4
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,scif-r9a07g044      # RZ/G2{L,LC}
+
+      - items:
+          - enum:
+              - renesas,scif-r9a07g043      # RZ/G2UL and RZ/Five
+              - renesas,scif-r9a07g054      # RZ/V2L
+          - const: renesas,scif-r9a07g044   # RZ/G2{L,LC} fallback
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    oneOf:
+      - items:
+          - description: A combined interrupt
+      - items:
+          - description: Error interrupt
+          - description: Receive buffer full interrupt
+          - description: Transmit buffer empty interrupt
+          - description: Transmit End interrupt
+      - items:
+          - description: Error interrupt
+          - description: Receive buffer full interrupt
+          - description: Transmit buffer empty interrupt
+          - description: Break interrupt
+          - description: Data Ready interrupt
+          - description: Transmit End interrupt
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: eri
+          - const: rxi
+          - const: txi
+          - const: tei
+      - items:
+          - const: eri
+          - const: rxi
+          - const: txi
+          - const: bri
+          - const: dri
+          - const: tei
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum:
+        - fck # UART functional clock
+        - sck # optional external clock input
+        - brg_int # optional internal clock source for BRG frequency divider
+        - scif_clk # optional external clock source for BRG frequency divider
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen2-scif
+          - renesas,rcar-gen3-scif
+          - renesas,rcar-gen4-scif
+          - renesas,scif-r9a07g044
+then:
+  required:
+    - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+    aliases {
+            serial0 = &scif0;
+    };
+
+    scif0: serial@e6e60000 {
+            compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+                         "renesas,scif";
+            reg = <0xe6e60000 64>;
+            interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+                     <&scif_clk>;
+            clock-names = "fck", "brg_int", "scif_clk";
+            dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
+            dma-names = "tx", "rx", "tx", "rx";
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 721>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
new file mode 100644
index 000000000000..3c67d3202e1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,scifa.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Serial Communications Interface with FIFO A (SCIFA)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,scifa-r8a73a4      # R-Mobile APE6
+              - renesas,scifa-r8a7740      # R-Mobile A1
+              - renesas,scifa-sh73a0       # SH-Mobile AG5
+          - const: renesas,scifa           # generic SCIFA compatible UART
+
+      - items:
+          - enum:
+              - renesas,scifa-r8a7742      # RZ/G1H
+              - renesas,scifa-r8a7743      # RZ/G1M
+              - renesas,scifa-r8a7744      # RZ/G1N
+              - renesas,scifa-r8a7745      # RZ/G1E
+              - renesas,scifa-r8a7790      # R-Car H2
+              - renesas,scifa-r8a7791      # R-Car M2-W
+              - renesas,scifa-r8a7793      # R-Car M2-N
+              - renesas,scifa-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-scifa # R-Car Gen2 and RZ/G1
+          - const: renesas,scifa           # generic SCIFA compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    enum:
+      - fck # UART functional clock
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen2-scifa
+then:
+  required:
+    - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+    aliases {
+            serial0 = &scifa0;
+    };
+
+    scifa0: serial@e6c40000 {
+            compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
+                         "renesas,scifa";
+            reg = <0xe6c40000 64>;
+            interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 204>;
+            clock-names = "fck";
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 204>;
+            dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
+            dma-names = "tx", "rx", "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
new file mode 100644
index 000000000000..d5571c7a4424
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,scifb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Serial Communications Interface with FIFO B (SCIFB)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,scifb-r8a73a4      # R-Mobile APE6
+              - renesas,scifb-r8a7740      # R-Mobile A1
+              - renesas,scifb-sh73a0       # SH-Mobile AG5
+          - const: renesas,scifb           # generic SCIFB compatible UART
+
+      - items:
+          - enum:
+              - renesas,scifb-r8a7742      # RZ/G1H
+              - renesas,scifb-r8a7743      # RZ/G1M
+              - renesas,scifb-r8a7744      # RZ/G1N
+              - renesas,scifb-r8a7745      # RZ/G1E
+              - renesas,scifb-r8a7790      # R-Car H2
+              - renesas,scifb-r8a7791      # R-Car M2-W
+              - renesas,scifb-r8a7793      # R-Car M2-N
+              - renesas,scifb-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-scifb # R-Car Gen2 and RZ/G1
+          - const: renesas,scifb           # generic SCIFB compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    enum:
+      - fck # UART functional clock
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen2-scifb
+then:
+  required:
+    - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7740-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    scifb: serial@e6c30000 {
+            compatible = "renesas,scifb-r8a7740", "renesas,scifb";
+            reg = <0xe6c30000 0x100>;
+            interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+            clock-names = "fck";
+            power-domains = <&pd_a3sp>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index d4beaf11222d..90a1bab40f05 100644
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -6,40 +6,51 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: RS485 serial communications Bindings
 
-description: The RTS signal is capable of automatically controlling
-             line direction for the built-in half-duplex mode.
-             The properties described hereafter shall be given to a
-             half-duplex capable UART node.
+description: The RTS signal is capable of automatically controlling line
+  direction for the built-in half-duplex mode. The properties described
+  hereafter shall be given to a half-duplex capable UART node.
 
 maintainers:
-  -  Rob Herring <robh@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 properties:
   rs485-rts-delay:
     description: prop-encoded-array <a b>
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          items:
-            - description:
-                Delay between rts signal and beginning of data sent in milliseconds.
-                It corresponds to the delay before sending data.
-              default: 0
-              maximum: 1000
-            - description:
-                Delay between end of data sent and rts signal in milliseconds.
-                It corresponds to the delay after sending data and actual release of the line.
-              default: 0
-              maximum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      items:
+        - description: Delay between rts signal and beginning of data sent in
+            milliseconds. It corresponds to the delay before sending data.
+          default: 0
+          maximum: 100
+        - description: Delay between end of data sent and rts signal in milliseconds.
+            It corresponds to the delay after sending data and actual release
+            of the line.
+          default: 0
+          maximum: 100
 
   rs485-rts-active-low:
     description: drive RTS low when sending (default is high).
     $ref: /schemas/types.yaml#/definitions/flag
 
+  rs485-rx-active-high:
+    description: Polarity of receiver enable signal (when separate from RTS).
+      True indicates active high (default is low).
+    $ref: /schemas/types.yaml#/definitions/flag
+
   linux,rs485-enabled-at-boot-time:
-    description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl.
+    description: enables the rs485 feature at boot time. It can be disabled
+      later with proper ioctl.
     $ref: /schemas/types.yaml#/definitions/flag
 
   rs485-rx-during-tx:
-   description: enables the receiving of data even while sending data.
-   $ref: /schemas/types.yaml#/definitions/flag
+    description: enables the receiving of data even while sending data.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  rs485-term-gpios:
+    description: GPIO pin to enable RS485 bus termination.
+    maxItems: 1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
index 9d2ce347875b..8bd88d5cbb11 100644
--- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Samsung S3C, S5P and Exynos SoC UART Controller
+title: Samsung S3C, S5P, Exynos, and S5L (Apple SoC) SoC UART Controller
 
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
@@ -17,18 +17,31 @@ description: |+
 
 properties:
   compatible:
-    items:
+    oneOf:
+      - items:
+          - const: samsung,exynosautov9-uart
+          - const: samsung,exynos850-uart
       - enum:
+          - apple,s5l-uart
+          - axis,artpec8-uart
           - samsung,s3c2410-uart
           - samsung,s3c2412-uart
           - samsung,s3c2440-uart
           - samsung,s3c6400-uart
           - samsung,s5pv210-uart
           - samsung,exynos4210-uart
+          - samsung,exynos5433-uart
+          - samsung,exynos850-uart
 
   reg:
     maxItems: 1
 
+  reg-io-width:
+    description: |
+      The size (in bytes) of the IO accesses that should be performed
+      on the device.
+    enum: [ 1, 4 ]
+
   clocks:
     minItems: 2
     maxItems: 5
@@ -36,7 +49,6 @@ properties:
   clock-names:
     description: N = 0 is allowed for SoCs without internal baud clock mux.
     minItems: 2
-    maxItems: 5
     items:
       - const: uart
       - pattern: '^clk_uart_baud[0-3]$'
@@ -44,16 +56,28 @@ properties:
       - pattern: '^clk_uart_baud[0-3]$'
       - pattern: '^clk_uart_baud[0-3]$'
 
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
   interrupts:
     description: RX interrupt and optionally TX interrupt.
     minItems: 1
     maxItems: 2
 
+  power-domains:
+    maxItems: 1
+
   samsung,uart-fifosize:
     description: The fifo size supported by the UART channel.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [16, 64, 256]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [16, 64, 256]
 
 required:
   - compatible
@@ -62,7 +86,11 @@ required:
   - interrupts
   - reg
 
+unevaluatedProperties: false
+
 allOf:
+  - $ref: serial.yaml#
+
   - if:
       properties:
         compatible:
@@ -77,7 +105,6 @@ allOf:
           maxItems: 3
         clock-names:
           minItems: 2
-          maxItems: 3
           items:
             - const: uart
             - pattern: '^clk_uart_baud[0-1]$'
@@ -88,15 +115,15 @@ allOf:
         compatible:
           contains:
             enum:
+              - apple,s5l-uart
+              - axis,artpec8-uart
               - samsung,exynos4210-uart
+              - samsung,exynos5433-uart
     then:
       properties:
         clocks:
-          minItems: 2
           maxItems: 2
         clock-names:
-          minItems: 2
-          maxItems: 2
           items:
             - const: uart
             - const: clk_uart_baud0
diff --git a/Documentation/devicetree/bindings/serial/serial.txt b/Documentation/devicetree/bindings/serial/serial.txt
deleted file mode 100644
index 863c2893759e..000000000000
--- a/Documentation/devicetree/bindings/serial/serial.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Generic Serial DT Bindings
-
-This document lists a set of generic properties for describing UARTs in a
-device tree.  Whether these properties apply to a particular device depends on
-the DT bindings for the actual device.
-
-Optional properties:
-  - cts-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
-    used as the UART's CTS line.
-  - dcd-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
-    used as the UART's DCD line.
-  - dsr-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
-    used as the UART's DSR line.
-  - dtr-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
-    used as the UART's DTR line.
-  - rng-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
-    used as the UART's RNG line.
-  - rts-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
-    used as the UART's RTS line.
-
-  - uart-has-rtscts: The presence of this property indicates that the
-    UART has dedicated lines for RTS/CTS hardware flow control, and that
-    they are available for use (wired and enabled by pinmux configuration).
-    This depends on both the UART hardware and the board wiring.
-    Note that this property is mutually-exclusive with "cts-gpios" and
-    "rts-gpios" above, unless support is provided to switch between modes
-    dynamically.
-
-
-Examples:
-
-	uart1: serial@48022000 {
-		compatible = "ti,am3352-uart", "ti,omap3-uart";
-		ti,hwmods = "uart2";
-		clock-frequency = <48000000>;
-		reg = <0x48022000 0x2000>;
-		interrupts = <73>;
-		dmas = <&edma 28 0>, <&edma 29 0>;
-		dma-names = "tx", "rx";
-		dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-		rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-		cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-	};
-
-	scifa4: serial@e6c80000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6c80000 0x100>;
-		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
-		clock-names = "fck";
-		power-domains = <&pd_a3sp>;
-		uart-has-rtscts;
-	};
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
new file mode 100644
index 000000000000..c75ba3fb6465
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/serial.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Serial Interface Generic DT Bindings
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description:
+  This document lists a set of generic properties for describing UARTs in a
+  device tree.  Whether these properties apply to a particular device depends
+  on the DT bindings for the actual device.
+
+  Each enabled UART may have an optional "serialN" alias in the "aliases" node,
+  where N is the port number (non-negative decimal integer) as printed on the
+  label next to the physical port.
+
+properties:
+  $nodename:
+    pattern: "^serial(@.*)?$"
+
+  label: true
+
+  cts-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's CTS line.
+
+  dcd-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's DCD line.
+
+  dsr-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's DSR line.
+
+  dtr-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's DTR line.
+
+  rng-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's RNG line.
+
+  rts-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's RTS line.
+
+  uart-has-rtscts:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The presence of this property indicates that the UART has dedicated lines
+      for RTS/CTS hardware flow control, and that they are available for use
+      (wired and enabled by pinmux configuration).  This depends on both the
+      UART hardware and the board wiring.
+
+  rx-tx-swap:
+    type: boolean
+    description: RX and TX pins are swapped.
+
+  cts-rts-swap:
+    type: boolean
+    description: CTS and RTS pins are swapped.
+
+  rx-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      RX FIFO threshold configuration (in bytes).
+
+  tx-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      TX FIFO threshold configuration (in bytes).
+
+if:
+  required:
+    - uart-has-rtscts
+then:
+  properties:
+    cts-gpios: false
+    rts-gpios: false
+
+patternProperties:
+  ".*":
+    if:
+      type: object
+    then:
+      description:
+        Serial attached devices shall be a child node of the host UART device
+        the slave device is attached to. It is expected that the attached
+        device is the only child node of the UART device. The slave device node
+        name shall reflect the generic type of device for the node.
+
+      properties:
+        compatible:
+          description:
+            Compatible of the device connected to the serial port.
+
+        max-speed:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            The maximum baud rate the device operates at.
+            This should only be present if the maximum is less than the slave
+            device can support.  For example, a particular board has some
+            signal quality issue or the host processor can't support higher
+            baud rates.
+
+        current-speed:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description: |
+            The current baud rate the device operates at.
+            This should only be present in case a driver has no chance to know
+            the baud rate of the slave device.
+            Examples:
+              * device supports auto-baud
+              * the rate is setup by a bootloader and there is no way to reset
+                the device
+              * device baud rate is configured by its firmware but there is no
+                way to request the actual settings
+
+      required:
+        - compatible
+
+additionalProperties: true
+
+examples:
+  - |
+    serial@1234 {
+            compatible = "ns16550a";
+            reg = <0x1234 0x20>;
+            interrupts = <1>;
+
+            bluetooth {
+                    compatible = "brcm,bcm4330-bt";
+                    interrupt-parent = <&gpio>;
+                    interrupts = <10>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.yaml b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
index e8d3aeda1202..b0a8871e3641 100644
--- a/Documentation/devicetree/bindings/serial/sifive-serial.yaml
+++ b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
@@ -12,12 +12,15 @@ maintainers:
   - Palmer Dabbelt <palmer@sifive.com>
 
 allOf:
-  - $ref: /schemas/serial.yaml#
+  - $ref: serial.yaml#
 
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-uart
+      - enum:
+          - sifive,fu540-c000-uart
+          - sifive,fu740-c000-uart
+          - canaan,k210-uarths
       - const: sifive,uart0
 
     description:
@@ -46,7 +49,7 @@ required:
   - interrupts
   - clocks
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -55,8 +58,8 @@ examples:
         compatible = "sifive,fu540-c000-uart", "sifive,uart0";
         interrupt-parent = <&plic0>;
         interrupts = <80>;
-        reg = <0x0 0x10010000 0x0 0x1000>;
-        clocks = <&prci PRCI_CLK_TLCLK>;
+        reg = <0x10010000 0x1000>;
+        clocks = <&prci FU540_PRCI_CLK_TLCLK>;
       };
 
 ...
diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt
deleted file mode 100644
index 1e48bbbeecc6..000000000000
--- a/Documentation/devicetree/bindings/serial/sirf-uart.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* CSR SiRFprimaII/atlasVI Universal Synchronous Asynchronous Receiver/Transmitter *
-
-Required properties:
-- compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart",
-		"sirf,atlas7-uart" or "sirf,atlas7-usp-uart".
-- reg : Offset and length of the register set for the device
-- interrupts : Should contain uart interrupt
-- fifosize : Should define hardware rx/tx fifo size
-- clocks : Should contain uart clock number
-
-Optional properties:
-- uart-has-rtscts: we have hardware flow controller pins in hardware
-- rts-gpios: RTS pin for USP-based UART if uart-has-rtscts is true
-- cts-gpios: CTS pin for USP-based UART if uart-has-rtscts is true
-
-Example:
-
-uart0: uart@b0050000 {
-	cell-index = <0>;
-	compatible = "sirf,prima2-uart";
-	reg = <0xb0050000 0x1000>;
-	interrupts = <17>;
-	fifosize = <128>;
-	clocks = <&clks 13>;
-};
-
-On the board-specific dts, we can put rts-gpios and cts-gpios like
-
-usp@b0090000 {
-	compatible = "sirf,prima2-usp-uart";
-	uart-has-rtscts;
-	rts-gpios = <&gpio 15 0>;
-	cts-gpios = <&gpio 46 0>;
-};
diff --git a/Documentation/devicetree/bindings/serial/slave-device.txt b/Documentation/devicetree/bindings/serial/slave-device.txt
deleted file mode 100644
index 40110e019620..000000000000
--- a/Documentation/devicetree/bindings/serial/slave-device.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Serial Slave Device DT binding
-
-This documents the binding structure and common properties for serial
-attached devices. Common examples include Bluetooth, WiFi, NFC and GPS
-devices.
-
-Serial attached devices shall be a child node of the host UART device the
-slave device is attached to. It is expected that the attached device is
-the only child node of the UART device. The slave device node name shall
-reflect the generic type of device for the node.
-
-Required Properties:
-
-- compatible 	: A string reflecting the vendor and specific device the node
-		  represents.
-
-Optional Properties:
-
-- max-speed	: The maximum baud rate the device operates at. This should
-		  only be present if the maximum is less than the slave device
-		  can support. For example, a particular board has some signal
-		  quality issue or the host processor can't support higher
-		  baud rates.
-- current-speed	: The current baud rate the device operates at. This should
-		  only be present in case a driver has no chance to know
-		  the baud rate of the slave device.
-		  Examples:
-		    * device supports auto-baud
-		    * the rate is setup by a bootloader and there is no
-		      way to reset the device
-		    * device baud rate is configured by its firmware but
-		      there is no way to request the actual settings
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-	interrupts = <1>;
-
-	bluetooth {
-		compatible = "brcm,bcm43341-bt";
-		interrupt-parent = <&gpio>;
-		interrupts = <10>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
index b42002542690..b9c2287c5d1e 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Rob Herring <robh@kernel.org>
 
 allOf:
-  - $ref: /schemas/serial.yaml#
+  - $ref: serial.yaml#
 
 properties:
   compatible:
@@ -23,20 +23,31 @@ properties:
       - items:
           - enum:
               - rockchip,px30-uart
+              - rockchip,rk1808-uart
               - rockchip,rk3036-uart
               - rockchip,rk3066-uart
+              - rockchip,rk3128-uart
               - rockchip,rk3188-uart
               - rockchip,rk3288-uart
+              - rockchip,rk3308-uart
               - rockchip,rk3328-uart
               - rockchip,rk3368-uart
               - rockchip,rk3399-uart
+              - rockchip,rk3568-uart
+              - rockchip,rk3588-uart
               - rockchip,rv1108-uart
+              - rockchip,rv1126-uart
           - const: snps,dw-apb-uart
       - items:
           - enum:
               - brcm,bcm11351-dw-apb-uart
               - brcm,bcm21664-dw-apb-uart
           - const: snps,dw-apb-uart
+      - items:
+          - enum:
+              - starfive,jh7100-hsuart
+              - starfive,jh7100-uart
+          - const: snps,dw-apb-uart
       - const: snps,dw-apb-uart
 
   reg:
@@ -100,6 +111,8 @@ required:
   - reg
   - interrupts
 
+unevaluatedProperties: false
+
 examples:
   - |
     serial@80230000 {
diff --git a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml
new file mode 100644
index 000000000000..3d01cc355778
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/socionext,uniphier-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier UART controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    const: socionext,uniphier-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  auto-flow-control:
+    description: enable automatic flow control support.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    aliases {
+        serial0 = &serial0;
+    };
+
+    serial0: serial@54006800 {
+        compatible = "socionext,uniphier-uart";
+        reg = <0x54006800 0x40>;
+        interrupts = <0 33 4>;
+        clocks = <&uart_clk>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
index e66b2e92a7fc..da0e2745b5fc 100644
--- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
@@ -19,6 +19,7 @@ properties:
           - enum:
               - sprd,sc9860-uart
               - sprd,sc9863a-uart
+              - sprd,ums512-uart
           - const: sprd,sc9836-uart
       - const: sprd,sc9836-uart
 
@@ -34,7 +35,7 @@ properties:
 
   clock-names:
     description: |
-      "enable" for UART module enable clock, "uart" for UART clock, "source" 
+      "enable" for UART module enable clock, "uart" for UART clock, "source"
       for UART source (parent) clock.
     items:
       - const: enable
@@ -56,6 +57,8 @@ required:
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 238c44192d31..333dc42722d2 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -5,13 +5,10 @@ $id: http://devicetree.org/schemas/serial/st,stm32-uart.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 maintainers:
-  - Erwan Le Ray <erwan.leray@st.com>
+  - Erwan Le Ray <erwan.leray@foss.st.com>
 
 title: STMicroelectronics STM32 USART bindings
 
-allOf:
-  - $ref: rs485.yaml
-
 properties:
   compatible:
     enum:
@@ -35,9 +32,13 @@ properties:
     description: label associated with this uart
 
   st,hw-flow-ctrl:
-    description: enable hardware flow control
+    description: enable hardware flow control (deprecated)
     $ref: /schemas/types.yaml#/definitions/flag
 
+  uart-has-rtscts: true
+
+  rx-tx-swap: true
+
   dmas:
     minItems: 1
     maxItems: 2
@@ -48,6 +49,15 @@ properties:
     minItems: 1
     maxItems: 2
 
+# cts-gpios and rts-gpios properties can be used instead of 'uart-has-rtscts'
+# or 'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow
+# control instead of dedicated pins.
+#
+# It should be noted that both cts-gpios/rts-gpios and 'uart-has-rtscts' or
+# 'st,hw-flow-ctrl' (deprecated) properties cannot co-exist in a design.
+  cts-gpios: true
+  rts-gpios: true
+
   wakeup-source: true
 
   rs485-rts-delay: true
@@ -55,25 +65,68 @@ properties:
   linux,rs485-enabled-at-boot-time: true
   rs485-rx-during-tx: true
 
+  rx-threshold:
+    description:
+      If value is set to 1, RX FIFO threshold is disabled.
+    enum: [1, 2, 4, 8, 12, 14, 16]
+    default: 8
+
+  tx-threshold:
+    description:
+      If value is set to 1, TX FIFO threshold is disabled.
+    enum: [1, 2, 4, 8, 12, 14, 16]
+    default: 8
+
+allOf:
+  - $ref: rs485.yaml#
+  - $ref: serial.yaml#
+  - if:
+      required:
+        - st,hw-flow-ctrl
+    then:
+      properties:
+        cts-gpios: false
+        rts-gpios: false
+  - if:
+      properties:
+        compatible:
+          const: st,stm32-uart
+    then:
+      properties:
+        rx-tx-swap: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32-uart
+              - st,stm32f7-uart
+    then:
+      properties:
+        rx-threshold: false
+        tx-threshold: false
+
 required:
   - compatible
   - reg
   - interrupts
   - clocks
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/stm32mp1-clks.h>
     usart1: serial@40011000 {
-      compatible = "st,stm32-uart";
+      compatible = "st,stm32h7-uart";
       reg = <0x40011000 0x400>;
       interrupts = <37>;
       clocks = <&rcc 0 164>;
       dmas = <&dma2 2 4 0x414 0x0>,
              <&dma2 7 4 0x414 0x0>;
       dma-names = "rx", "tx";
+      rx-threshold = <4>;
+      tx-threshold = <4>;
       rs485-rts-active-low;
     };
 
diff --git a/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml
new file mode 100644
index 000000000000..ea1e637661c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/sunplus,sp7021-uart.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Sunplus SoC SP7021 UART Controller
+
+maintainers:
+  - Hammer Hsieh <hammerh0314@gmail.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: sunplus,sp7021-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    aliases {
+        serial0 = &uart0;
+    };
+
+    uart0: serial@9c000900 {
+        compatible = "sunplus,sp7021-uart";
+        reg = <0x9c000900 0x80>;
+        interrupt-parent = <&intc>;
+        interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0x28>;
+        resets = <&rstc 0x18>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/serial/uniphier-uart.txt b/Documentation/devicetree/bindings/serial/uniphier-uart.txt
deleted file mode 100644
index 7a1bf02bb869..000000000000
--- a/Documentation/devicetree/bindings/serial/uniphier-uart.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-UniPhier UART controller
-
-Required properties:
-- compatible: should be "socionext,uniphier-uart".
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: phandle to the input clock.
-
-Optional properties:
--auto-flow-control: enable automatic flow control support.
-
-Example:
-	aliases {
-		serial0 = &serial0;
-	};
-
-	serial0: serial@54006800 {
-		compatible = "socionext,uniphier-uart";
-		reg = <0x54006800 0x40>;
-		interrupts = <0 33 4>;
-		clocks = <&uart_clk>;
-	};
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt
deleted file mode 100644
index c37deb44dead..000000000000
--- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Xilinx Axi Uartlite controller Device Tree Bindings
----------------------------------------------------------
-
-Required properties:
-- compatible		: Can be either of
-				"xlnx,xps-uartlite-1.00.a"
-				"xlnx,opb-uartlite-1.00.b"
-- reg			: Physical base address and size of the Axi Uartlite
-			  registers map.
-- interrupts		: Should contain the UART controller interrupt.
-
-Optional properties:
-- port-number		: Set Uart port number
-- clock-names		: Should be "s_axi_aclk"
-- clocks		: Input clock specifier. Refer to common clock bindings.
-
-Example:
-serial@800c0000 {
-	compatible = "xlnx,xps-uartlite-1.00.a";
-	reg = <0x0 0x800c0000 0x10000>;
-	interrupts = <0x0 0x6e 0x1>;
-	port-number = <0>;
-};
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
new file mode 100644
index 000000000000..f7617b88c7c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/xlnx,opb-uartlite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Axi Uartlite
+
+maintainers:
+  - Peter Korsgaard <jacmet@sunsite.dk>
+
+properties:
+  compatible:
+    contains:
+      enum:
+        - xlnx,xps-uartlite-1.00.a
+        - xlnx,opb-uartlite-1.00.b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  port-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Set Uart port number
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: s_axi_aclk
+
+  current-speed:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The fixed baud rate that the device was configured for.
+
+  xlnx,data-bits:
+    enum: [5, 6, 7, 8]
+    description:
+      The fixed number of data bits that the device was configured for.
+
+  xlnx,use-parity:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description:
+      Whether parity checking was enabled when the device was configured.
+
+  xlnx,odd-parity:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description:
+      Whether odd parity was configured.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - current-speed
+  - xlnx,data-bits
+  - xlnx,use-parity
+
+allOf:
+  - $ref: /schemas/serial.yaml#
+  - if:
+      properties:
+        xlnx,use-parity:
+          contains:
+            const: 1
+    then:
+      required:
+        - xlnx,odd-parity
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      serial@800c0000 {
+        compatible = "xlnx,xps-uartlite-1.00.a";
+        reg = <0x800c0000 0x10000>;
+        interrupts = <0x0 0x6e 0x1>;
+        port-number = <0>;
+        current-speed = <115200>;
+        xlnx,data-bits = <8>;
+        xlnx,use-parity = <0>;
+      };
+...
diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml b/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml
index 2ecab8ed702a..7fa70fd1f291 100644
--- a/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml
+++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/serio/allwinner,sun4i-a10-ps2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 PS2 Host Controller Device Tree Bindings
+title: Allwinner A10 PS2 Host Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/serio/arm,pl050.yaml b/Documentation/devicetree/bindings/serio/arm,pl050.yaml
new file mode 100644
index 000000000000..d80f58d15497
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/arm,pl050.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serio/arm,pl050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Ltd. PrimeCell PL050 PS/2 Keyboard/Mouse Interface
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm PrimeCell PS2 Keyboard/Mouse Interface (KMI) is an AMBA compliant
+  peripheral that can be used to implement a keyboard or mouse interface that
+  is IBM PS2 or AT compatible.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl050
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl050
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: KMI reference clock, used to generate the bus timing
+      - description: APB register access clock
+
+  clock-names:
+    items:
+      - const: KMIREFCLK
+      - const: apb_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    serio@70000 {
+        compatible = "arm,pl050", "arm,primecell";
+        reg = <0x070000 0x1000>;
+        interrupts = <8>;
+        clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+        clock-names = "KMIREFCLK", "apb_pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/serio/ps2-gpio.txt b/Documentation/devicetree/bindings/serio/ps2-gpio.txt
deleted file mode 100644
index 7b7bc9cdf986..000000000000
--- a/Documentation/devicetree/bindings/serio/ps2-gpio.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Device-Tree binding for ps/2 gpio device
-
-Required properties:
-	- compatible = "ps2-gpio"
-	- data-gpios: the data pin
-	- clk-gpios: the clock pin
-	- interrupts: Should trigger on the falling edge of the clock line.
-
-Optional properties:
-	- write-enable: Indicates whether write function is provided
-	to serio device. Possibly providing the write fn will not work, because
-	of the tough timing requirements.
-
-Example nodes:
-
-ps2@0 {
-	compatible = "ps2-gpio";
-	interrupt-parent = <&gpio>;
-	interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
-	data-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
-	clk-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
-	write-enable;
-};
diff --git a/Documentation/devicetree/bindings/serio/ps2-gpio.yaml b/Documentation/devicetree/bindings/serio/ps2-gpio.yaml
new file mode 100644
index 000000000000..a63d9172346f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/ps2-gpio.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serio/ps2-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for GPIO based PS/2
+
+maintainers:
+  - Danilo Krummrich <danilokrummrich@dk-develop.de>
+
+properties:
+  compatible:
+    const: ps2-gpio
+
+  data-gpios:
+    description:
+      the gpio used for the data signal - this should be flagged as
+      active high using open drain with (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)
+      from <dt-bindings/gpio/gpio.h> since the signal is open drain by
+      definition
+    maxItems: 1
+
+  clk-gpios:
+    description:
+      the gpio used for the clock signal - this should be flagged as
+      active high using open drain with (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)
+      from <dt-bindings/gpio/gpio.h> since the signal is open drain by
+      definition
+    maxItems: 1
+
+  interrupts:
+    description:
+      The given interrupt should trigger on the falling edge of the clock line.
+    maxItems: 1
+
+  write-enable:
+    type: boolean
+    description:
+      Indicates whether write function is provided to serio device. Possibly
+      providing the write function will not work, because of the tough timing
+      requirements.
+
+required:
+  - compatible
+  - data-gpios
+  - clk-gpios
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    ps2 {
+        compatible = "ps2-gpio";
+        interrupt-parent = <&gpio>;
+        interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+        data-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+        clk-gpios = <&gpio 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+        write-enable;
+    };
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
index f548594d020b..c3c599096353 100644
--- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Canvas Video Lookup Table
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Maxime Jourdan <mjourdan@baylibre.com>
 
 description: |
@@ -26,11 +26,11 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - amlogic,meson8-canvas
-          - amlogic,meson8b-canvas
-          - amlogic,meson8m2-canvas
-        - const: amlogic,canvas
+          - enum:
+              - amlogic,meson8-canvas
+              - amlogic,meson8b-canvas
+              - amlogic,meson8m2-canvas
+          - const: amlogic,canvas
       - const: amlogic,canvas # GXBB and newer SoCs
 
   reg:
@@ -40,10 +40,11 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     canvas: video-lut@48 {
         compatible = "amlogic,canvas";
         reg = <0x48 0x14>;
     };
-
diff --git a/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml
new file mode 100644
index 000000000000..6876407124dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# # Copyright (c) 2018 Google LLC
+# # Copyright (c) 2021 Aspeed Technology Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Aspeed UART Routing Controller
+
+maintainers:
+  - Oskar Senft <osk@google.com>
+  - Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+
+description:
+  The Aspeed UART routing control allow to dynamically route the inputs for
+  the built-in UARTS and physical serial I/O ports.
+
+  This allows, for example, to connect the output of UART to another UART.
+  This can be used to enable Host <-> BMC communication via UARTs, e.g. to
+  allow access to the Host's serial console.
+
+  This driver is for the BMC side. The sysfs files allow the BMC userspace
+  which owns the system configuration policy, to configure how UARTs and
+  physical serial I/O ports are routed.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-uart-routing
+          - aspeed,ast2500-uart-routing
+          - aspeed,ast2600-uart-routing
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    lpc: lpc@1e789000 {
+        compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
+        reg = <0x1e789000 0x1000>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e789000 0x1000>;
+
+        uart_routing: uart-routing@98 {
+            compatible = "aspeed,ast2600-uart-routing";
+            reg = <0x98 0x8>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
deleted file mode 100644
index 72ff033565e5..000000000000
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-BCM2835 PM (Power domains, watchdog)
-
-The PM block controls power domains and some reset lines, and includes
-a watchdog timer.  This binding supersedes the brcm,bcm2835-pm-wdt
-binding which covered some of PM's register range and functionality.
-
-Required properties:
-
-- compatible:		Should be "brcm,bcm2835-pm"
-- reg:			Specifies base physical address and size of the two
-			  register ranges ("PM" and "ASYNC_BRIDGE" in that
-			  order)
-- clocks:		a) v3d: The V3D clock from CPRMAN
-			b) peri_image: The PERI_IMAGE clock from CPRMAN
-			c) h264: The H264 clock from CPRMAN
-			d) isp: The ISP clock from CPRMAN
-- #reset-cells: 	Should be 1.  This property follows the reset controller
-			  bindings[1].
-- #power-domain-cells:	Should be 1.  This property follows the power domain
-			  bindings[2].
-
-Optional properties:
-
-- timeout-sec:		Contains the watchdog timeout in seconds
-- system-power-controller: Whether the watchdog is controlling the
-    system power.  This node follows the power controller bindings[3].
-
-[1] Documentation/devicetree/bindings/reset/reset.txt
-[2] Documentation/devicetree/bindings/power/power-domain.yaml
-[3] Documentation/devicetree/bindings/power/power-controller.txt
-
-Example:
-
-pm {
-	compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
-	#power-domain-cells = <1>;
-	#reset-cells = <1>;
-	reg = <0x7e100000 0x114>,
-	      <0x7e00a000 0x24>;
-	clocks = <&clocks BCM2835_CLOCK_V3D>,
-		 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
-		 <&clocks BCM2835_CLOCK_H264>,
-		 <&clocks BCM2835_CLOCK_ISP>;
-	clock-names = "v3d", "peri_image", "h264", "isp";
-	system-power-controller;
-};
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
new file mode 100644
index 000000000000..e28ef198a801
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-pm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 PM (Power domains, watchdog)
+
+description: |
+  The PM block controls power domains and some reset lines, and includes a
+  watchdog timer.
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+allOf:
+  - $ref: /schemas/watchdog/watchdog.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm2835-pm
+          - brcm,bcm2711-pm
+      - const: brcm,bcm2835-pm-wdt
+
+  reg:
+    minItems: 2
+    maxItems: 3
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: pm
+      - const: asb
+      - const: rpivid_asb
+
+  "#power-domain-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 4
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: v3d
+      - const: peri_image
+      - const: h264
+      - const: isp
+
+  system-power-controller:
+    type: boolean
+
+  timeout-sec: true
+
+required:
+  - compatible
+  - reg
+  - "#power-domain-cells"
+  - "#reset-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    watchdog@7e100000 {
+        compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+        reg = <0x7e100000 0x114>,
+              <0x7e00a000 0x24>;
+        reg-names = "pm", "asb";
+        clocks = <&clocks BCM2835_CLOCK_V3D>,
+               <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+               <&clocks BCM2835_CLOCK_H264>,
+               <&clocks BCM2835_CLOCK_ISP>;
+        clock-names = "v3d", "peri_image", "h264", "isp";
+        system-power-controller;
+    };
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
deleted file mode 100644
index f331316183f6..000000000000
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Broadcom VCHIQ firmware services
-
-Required properties:
-
-- compatible:	Should be "brcm,bcm2835-vchiq" on BCM2835, otherwise
-		"brcm,bcm2836-vchiq".
-- reg:		Physical base address and length of the doorbell register pair
-- interrupts:	The interrupt number
-		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
-
-Example:
-
-mailbox@7e00b840 {
-	compatible = "brcm,bcm2835-vchiq";
-	reg = <0x7e00b840 0xf>;
-	interrupts = <0 2>;
-};
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.yaml
new file mode 100644
index 000000000000..e04439b3355b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-vchiq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VCHIQ firmware services
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+description:
+  The VCHIQ communication channel can be provided by BCM283x and Capri SoCs,
+  to communicate with the VPU-side OS services.
+
+properties:
+  compatible:
+    oneOf:
+      - description: BCM2835 based boards
+        items:
+          - enum:
+              - brcm,bcm2835-vchiq
+
+      - description: BCM2836/BCM2837 based boards
+        items:
+          - enum:
+              - brcm,bcm2836-vchiq
+          - const: brcm,bcm2835-vchiq
+
+  reg:
+    description: Physical base address and length of the doorbell register pair
+    minItems: 1
+
+  interrupts:
+    description: Interrupt number of the doorbell interrupt
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox@7e00b840 {
+      compatible = "brcm,bcm2835-vchiq";
+      reg = <0x7e00b840 0xf>;
+      interrupts = <0 2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
new file mode 100644
index 000000000000..397f75909b20
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-dcfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Device Configuration Unit
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  DCFG is the device configuration unit, that provides general purpose
+  configuration and status for the device. Such as setting the secondary
+  core start address and release the secondary core from holdoff and
+  startup.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,ls1012a-dcfg
+              - fsl,ls1021a-dcfg
+              - fsl,ls1043a-dcfg
+              - fsl,ls1046a-dcfg
+              - fsl,ls1088a-dcfg
+              - fsl,ls2080a-dcfg
+              - fsl,lx2160a-dcfg
+          - const: syscon
+
+      - items:
+          - enum:
+              - fsl,ls1028a-dcfg
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+  big-endian: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^clock-controller@[0-9a-z]+$":
+    $ref: /schemas/clock/fsl,flexspi-clock.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1ee0000 {
+        compatible = "fsl,ls1021a-dcfg", "syscon";
+        reg = <0x1ee0000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
new file mode 100644
index 000000000000..8d088b5fe823
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-scfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Supplemental Configuration Unit
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  SCFG is the supplemental configuration unit, that provides SoC specific
+  configuration and status registers for the chip. Such as getting PEX port
+  status.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,ls1012a-scfg
+          - fsl,ls1021a-scfg
+          - fsl,ls1028a-scfg
+          - fsl,ls1043a-scfg
+          - fsl,ls1046a-scfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+  big-endian: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^interrupt-controller@[a-z0-9]+$":
+    $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1570000 {
+        compatible = "fsl,ls1021a-scfg", "syscon";
+        reg = <0x1570000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml
new file mode 100644
index 000000000000..80d99861fec5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,aips-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX AHB to IP Bridge
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  This particular peripheral is designed as the bridge between
+  AHB bus and peripherals with the lower bandwidth IP Slave (IPS)
+  buses.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: fsl,aips-bus
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: fsl,aips-bus
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    bus@30000000 {
+      compatible = "fsl,aips-bus", "simple-bus";
+      reg = <0x30000000 0x400000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml
new file mode 100644
index 000000000000..ecd86cfb3da4
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MM DISP blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MM DISP blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the display and MIPI CSI
+  peripherals located in the DISP domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mm-disp-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 5
+    maxItems: 5
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: csi-bridge
+      - const: lcdif
+      - const: mipi-dsi
+      - const: mipi-csi
+
+  clocks:
+    minItems: 10
+    maxItems: 10
+
+  clock-names:
+    items:
+      - const: csi-bridge-axi
+      - const: csi-bridge-apb
+      - const: csi-bridge-core
+      - const: lcdif-axi
+      - const: lcdif-apb
+      - const: lcdif-pix
+      - const: dsi-pclk
+      - const: dsi-ref
+      - const: csi-aclk
+      - const: csi-pclk
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/power/imx8mm-power.h>
+
+    disp_blk_ctl: blk_ctrl@32e28000 {
+      compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
+      reg = <0x32e28000 0x100>;
+      power-domains = <&pgc_dispmix>, <&pgc_dispmix>, <&pgc_dispmix>,
+                      <&pgc_mipi>, <&pgc_mipi>;
+      power-domain-names = "bus", "csi-bridge", "lcdif",
+                           "mipi-dsi", "mipi-csi";
+      clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MM_CLK_CSI1_ROOT>,
+               <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MM_CLK_DISP_ROOT>,
+               <&clk IMX8MM_CLK_DSI_CORE>,
+               <&clk IMX8MM_CLK_DSI_PHY_REF>,
+               <&clk IMX8MM_CLK_CSI1_CORE>,
+               <&clk IMX8MM_CLK_CSI1_PHY_REF>;
+       clock-names = "csi-bridge-axi", "csi-bridge-apb", "csi-bridge-core",
+                     "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
+                     "dsi-ref", "csi-aclk", "csi-pclk";
+       #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml
new file mode 100644
index 000000000000..d71bb20d4907
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MM VPU blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MM VPU blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the VPU peripherals
+  located in the VPU domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mm-vpu-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 4
+
+  power-domain-names:
+    maxItems: 4
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    maxItems: 3
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mm-vpu-blk-ctrl
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: bus power domain
+            - description: G1 decoder power domain
+            - description: G2 decoder power domain
+            - description: H1 encoder power domain
+
+        power-domain-names:
+          items:
+            - const: bus
+            - const: g1
+            - const: g2
+            - const: h1
+
+        clocks:
+          items:
+            - description: G1 decoder clk
+            - description: G2 decoder clk
+            - description: H1 encoder clk
+
+        clock-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: h1
+
+        interconnects:
+          items:
+            - description: G1 decoder interconnect
+            - description: G2 decoder interconnect
+            - description: H1 encoder power domain
+
+        interconnect-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: h1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-vpu-blk-ctrl
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: bus power domain
+            - description: G1 decoder power domain
+            - description: G2 decoder power domain
+            - description: VC8000E encoder power domain
+
+        power-domain-names:
+          items:
+            - const: bus
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
+        clocks:
+          items:
+            - description: G1 decoder clk
+            - description: G2 decoder clk
+            - description: VC8000E encoder clk
+
+        clock-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
+        interconnects:
+          items:
+            - description: G1 decoder interconnect
+            - description: G2 decoder interconnect
+            - description: VC8000E encoder interconnect
+
+        interconnect-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/power/imx8mm-power.h>
+
+    vpu_blk_ctrl: blk-ctrl@38330000 {
+      compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
+      reg = <0x38330000 0x100>;
+      power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
+                      <&pgc_vpu_g2>, <&pgc_vpu_h1>;
+      power-domain-names = "bus", "g1", "g2", "h1";
+      clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
+               <&clk IMX8MM_CLK_VPU_G2_ROOT>,
+               <&clk IMX8MM_CLK_VPU_H1_ROOT>;
+      clock-names = "g1", "g2", "h1";
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
new file mode 100644
index 000000000000..fbeaac399c50
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MN DISP blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the display and MIPI CSI
+  peripherals located in the DISP domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mn-disp-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 5
+    maxItems: 5
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: isi
+      - const: lcdif
+      - const: mipi-dsi
+      - const: mipi-csi
+
+  clocks:
+    minItems: 11
+    maxItems: 11
+
+  clock-names:
+    items:
+      - const: disp_axi
+      - const: disp_apb
+      - const: disp_axi_root
+      - const: disp_apb_root
+      - const: lcdif-axi
+      - const: lcdif-apb
+      - const: lcdif-pix
+      - const: dsi-pclk
+      - const: dsi-ref
+      - const: csi-aclk
+      - const: csi-pclk
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+    #include <dt-bindings/power/imx8mn-power.h>
+
+    disp_blk_ctl: blk_ctrl@32e28000 {
+      compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
+      reg = <0x32e28000 0x100>;
+      power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+                      <&pgc_dispmix>, <&pgc_mipi>,
+                      <&pgc_mipi>;
+      power-domain-names = "bus", "isi", "lcdif", "mipi-dsi",
+                           "mipi-csi";
+      clocks = <&clk IMX8MN_CLK_DISP_AXI>,
+               <&clk IMX8MN_CLK_DISP_APB>,
+               <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+               <&clk IMX8MN_CLK_DSI_CORE>,
+               <&clk IMX8MN_CLK_DSI_PHY_REF>,
+               <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+               <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
+       clock-names = "disp_axi", "disp_apb", "disp_axi_root", "disp_apb_root",
+                     "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
+                     "dsi-ref", "csi-aclk", "csi-pclk";
+       #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
new file mode 100644
index 000000000000..1be4ce2a45e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP HDMI blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HDMMI blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the display pipeline
+  peripherals located in the HDMI domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mp-hdmi-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 8
+    maxItems: 8
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: irqsteer
+      - const: lcdif
+      - const: pai
+      - const: pvi
+      - const: trng
+      - const: hdmi-tx
+      - const: hdmi-tx-phy
+
+  clocks:
+    minItems: 4
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: ref_266m
+      - const: ref_24m
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    items:
+      - const: hrv
+      - const: lcdif-hdmi
+      - const: hdcp
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    blk-ctrl@32fc0000 {
+        compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon";
+        reg = <0x32fc0000 0x23c>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+                 <&clk IMX8MP_CLK_HDMI_ROOT>,
+                 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+                 <&clk IMX8MP_CLK_HDMI_24M>;
+        clock-names = "apb", "axi", "ref_266m", "ref_24m";
+        power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
+                        <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
+                        <&pgc_hdmimix>, <&pgc_hdmi_phy>;
+        power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng",
+                             "hdmi-tx", "hdmi-tx-phy";
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml
new file mode 100644
index 000000000000..c29181a9745b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP HSIO blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HSIO blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the high-speed IO
+  (USB an PCIe) peripherals located in the HSIO domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mp-hsio-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 6
+    maxItems: 6
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: usb
+      - const: usb-phy1
+      - const: usb-phy2
+      - const: pcie
+      - const: pcie-phy
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: usb
+      - const: pcie
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: noc-pcie
+      - const: usb1
+      - const: usb2
+      - const: pcie
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    hsio_blk_ctrl: blk-ctrl@32f10000 {
+        compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
+        reg = <0x32f10000 0x24>;
+        clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+                 <&clk IMX8MP_CLK_PCIE_ROOT>;
+        clock-names = "usb", "pcie";
+        power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
+                        <&pgc_usb1_phy>, <&pgc_usb2_phy>,
+                        <&pgc_hsiomix>, <&pgc_pcie_phy>;
+        power-domain-names = "bus", "usb", "usb-phy1",
+                             "usb-phy2", "pcie", "pcie-phy";
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
new file mode 100644
index 000000000000..dadb6108e321
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP Media Block Control
+
+maintainers:
+  - Paul Elder <paul.elder@ideasonboard.com>
+
+description:
+  The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level peripheral
+  providing access to the NoC and ensuring proper power sequencing of the
+  peripherals within the MEDIAMIX domain.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mp-media-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 10
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: mipi-dsi1
+      - const: mipi-csi1
+      - const: lcdif1
+      - const: isi
+      - const: mipi-csi2
+      - const: lcdif2
+      - const: isp
+      - const: dwe
+      - const: mipi-dsi2
+
+  clocks:
+    items:
+      - description: The APB clock
+      - description: The AXI clock
+      - description: The pixel clock for the first CSI2 receiver (aclk)
+      - description: The pixel clock for the second CSI2 receiver (aclk)
+      - description: The pixel clock for the first LCDIF (pix_clk)
+      - description: The pixel clock for the second LCDIF (pix_clk)
+      - description: The core clock for the ISP (clk)
+      - description: The MIPI-PHY reference clock used by DSI
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: cam1
+      - const: cam2
+      - const: disp1
+      - const: disp2
+      - const: isp
+      - const: phy
+
+  interconnects:
+    maxItems: 8
+
+  interconnect-names:
+    items:
+      - const: lcdif-rd
+      - const: lcdif-wr
+      - const: isi0
+      - const: isi1
+      - const: isi2
+      - const: isp0
+      - const: isp1
+      - const: dwe
+
+required:
+  - compatible
+  - reg
+  - '#power-domain-cells'
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    media_blk_ctl: blk-ctl@32ec0000 {
+        compatible = "fsl,imx8mp-media-blk-ctrl", "syscon";
+        reg = <0x32ec0000 0x138>;
+        power-domains = <&mediamix_pd>, <&mipi_phy1_pd>, <&mipi_phy1_pd>,
+                        <&mediamix_pd>, <&mediamix_pd>, <&mipi_phy2_pd>,
+                        <&mediamix_pd>, <&ispdwp_pd>, <&ispdwp_pd>,
+                        <&mipi_phy2_pd>;
+        power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", "lcdif1", "isi",
+                             "mipi-csi2", "lcdif2", "isp", "dwe", "mipi-dsi2";
+        clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>;
+        clock-names = "apb", "axi", "cam1", "cam2", "disp1", "disp2",
+                      "isp", "phy";
+        #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml
new file mode 100644
index 000000000000..7263ebedf09f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MQ VPU blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MQ VPU blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the VPU peripherals
+  located in the VPU domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mq-vpu-blk-ctrl
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 3
+    maxItems: 3
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: g1
+      - const: g2
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: g1
+      - const: g2
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/power/imx8mq-power.h>
+
+    vpu_blk_ctrl: blk-ctrl@38320000 {
+      compatible = "fsl,imx8mq-vpu-blk-ctrl";
+      reg = <0x38320000 0x100>;
+      power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
+      power-domain-names = "bus", "g1", "g2";
+      clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+               <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+      clock-names = "g1", "g2";
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
new file mode 100644
index 000000000000..792ebecec22d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-media-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 Media blk-ctrl
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description:
+  The i.MX93 MEDIAMIX domain contains control and status registers known
+  as MEDIAMIX Block Control (MEDIAMIX BLK_CTRL). These registers include
+  clocking, reset, and miscellaneous top-level controls for peripherals
+  within the MEDIAMIX domain
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx93-media-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 10
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: nic
+      - const: disp
+      - const: cam
+      - const: pxp
+      - const: lcdif
+      - const: isi
+      - const: csi
+      - const: dsi
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx93-clock.h>
+    #include <dt-bindings/power/fsl,imx93-power.h>
+
+    media_blk_ctrl: system-controller@4ac10000 {
+      compatible = "fsl,imx93-media-blk-ctrl", "syscon";
+      reg = <0x4ac10000 0x10000>;
+      power-domains = <&mediamix>;
+      clocks = <&clk IMX93_CLK_MEDIA_APB>,
+               <&clk IMX93_CLK_MEDIA_AXI>,
+               <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+               <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+               <&clk IMX93_CLK_CAM_PIX>,
+               <&clk IMX93_CLK_PXP_GATE>,
+               <&clk IMX93_CLK_LCDIF_GATE>,
+               <&clk IMX93_CLK_ISI_GATE>,
+               <&clk IMX93_CLK_MIPI_CSI_GATE>,
+               <&clk IMX93_CLK_MIPI_DSI_GATE>;
+               clock-names = "apb", "axi", "nic", "disp", "cam",
+                             "pxp", "lcdif", "isi", "csi", "dsi";
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml
new file mode 100644
index 000000000000..c1cc69b51981
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 System Reset Controller
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  The System Reset Controller (SRC) is responsible for the generation of
+  all the system reset signals and boot argument latching.
+
+  Its main functions are as follows,
+  - Deals with all global system reset sources from other modules,
+    and generates global system reset.
+  - Responsible for power gating of MIXs (Slices) and their memory
+    low power control.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx93-src
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "power-domain@[0-9a-f]+$":
+
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: fsl,imx93-src-slice
+
+      '#power-domain-cells':
+        const: 0
+
+      reg:
+        items:
+          - description: mix slice register region
+          - description: mem slice register region
+
+      clocks:
+        description: |
+          A number of phandles to clocks that need to be enabled
+          during domain power-up sequencing to ensure reset
+          propagation into devices located inside this power domain.
+        minItems: 1
+        maxItems: 5
+
+    required:
+      - compatible
+      - '#power-domain-cells'
+      - reg
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx93-clock.h>
+
+    system-controller@44460000 {
+        compatible = "fsl,imx93-src", "syscon";
+        reg = <0x44460000 0x10000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        mediamix: power-domain@0 {
+            compatible = "fsl,imx93-src-slice";
+            reg = <0x44462400 0x400>, <0x44465800 0x400>;
+            #power-domain-cells = <0>;
+            clocks = <&clk IMX93_CLK_MEDIA_AXI>,
+                     <&clk IMX93_CLK_MEDIA_APB>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
new file mode 100644
index 000000000000..effcc72f9425
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/imx8m-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Series SoC
+
+maintainers:
+  - Alice Guo <alice.guo@nxp.com>
+
+description: |
+  NXP i.MX8M series SoCs contain fuse entries from which SoC Unique ID can be
+  obtained.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx8mm
+          - fsl,imx8mn
+          - fsl,imx8mp
+          - fsl,imx8mq
+  required:
+    - compatible
+
+patternProperties:
+  "^soc@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - enum:
+              - fsl,imx8mm-soc
+              - fsl,imx8mn-soc
+              - fsl,imx8mp-soc
+              - fsl,imx8mq-soc
+          - const: simple-bus
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 1
+
+      ranges: true
+
+      dma-ranges: true
+
+      nvmem-cells:
+        maxItems: 1
+        description: Phandle to the SOC Unique ID provided by a nvmem node
+
+      nvmem-cell-names:
+        const: soc_unique_id
+
+    required:
+      - compatible
+      - nvmem-cells
+      - nvmem-cell-names
+
+    additionalProperties:
+      type: object
+
+additionalProperties: true
+
+examples:
+  - |
+    / {
+        model = "FSL i.MX8MM EVK board";
+        compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        soc@0 {
+            compatible = "fsl,imx8mm-soc", "simple-bus";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0x0 0x0 0x0 0x3e000000>;
+            nvmem-cells = <&imx8mm_uid>;
+            nvmem-cell-names = "soc_unique_id";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml b/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml
new file mode 100644
index 000000000000..8634865015cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022, Intel Corporation
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel HPS Copy Engine
+
+maintainers:
+  - Matthew Gerlach <matthew.gerlach@linux.intel.com>
+
+description: |
+  The Intel Hard Processor System (HPS) Copy Engine is an IP block used to copy
+  a bootable image from host memory to HPS DDR.  Additionally, there is a
+  register the HPS can use to indicate the state of booting the copied image as
+  well as a keep-a-live indication to the host.
+
+properties:
+  compatible:
+    const: intel,hps-copy-engine
+
+  '#dma-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus@80000000 {
+        compatible = "simple-bus";
+        reg = <0x80000000 0x60000000>,
+              <0xf9000000 0x00100000>;
+        reg-names = "axi_h2f", "axi_h2f_lw";
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>;
+
+        dma-controller@0 {
+            compatible = "intel,hps-copy-engine";
+            reg = <0x00000000 0x00000000 0x00001000>;
+            #dma-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
new file mode 100644
index 000000000000..ecae9fa8561b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2020 Antmicro <www.antmicro.com>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/litex/litex,soc-controller.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: LiteX SoC Controller driver
+
+description: |
+  This is the SoC Controller driver for the LiteX SoC Builder.
+  Its purpose is to verify LiteX CSR (Control&Status Register) access
+  operations and provide functions for other drivers to read/write CSRs
+  and to check if those accessors are ready to be used.
+
+maintainers:
+  - Karol Gugala <kgugala@antmicro.com>
+  - Mateusz Holenko <mholenko@antmicro.com>
+
+properties:
+  compatible:
+    const: litex,soc-controller
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc_ctrl0: soc-controller@f0000000 {
+        compatible = "litex,soc-controller";
+        reg = <0xf0000000 0xc>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
new file mode 100644
index 000000000000..d0a4bc3b03e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# # Copyright 2020 MediaTek Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/mediatek/devapc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Device Access Permission Control driver
+
+description: |
+  MediaTek bus fabric provides TrustZone security support and data
+  protection to prevent slaves from being accessed by unexpected masters.
+  The security violation is logged and sent to the processor for further
+  analysis and countermeasures.
+
+maintainers:
+  - Neal Liu <neal.liu@mediatek.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6779-devapc
+      - mediatek,mt8186-devapc
+
+  reg:
+    description: The base address of devapc register bank
+    maxItems: 1
+
+  interrupts:
+    description: A single interrupt specifier
+    maxItems: 1
+
+  clocks:
+    description: Contains module clock source and clock names
+    maxItems: 1
+
+  clock-names:
+    description: Names of the clocks list in clocks property
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt6779-clk.h>
+
+    devapc: devapc@10207000 {
+      compatible = "mediatek,mt6779-devapc";
+      reg = <0x10207000 0x1000>;
+      interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&infracfg_ao CLK_INFRA_DEVICE_APC>;
+      clock-names = "devapc-infra-clock";
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml
new file mode 100644
index 000000000000..4380b98b0dfe
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek color correction
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek color correction with 3X3 matrix.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-ccorr
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    mdp3_ccorr: mdp3-ccorr@1401c000 {
+      compatible = "mediatek,mt8183-mdp3-ccorr";
+      reg = <0x1401c000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_CCORR_SOF>,
+                            <CMDQ_EVENT_MDP_CCORR_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_CCORR>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
new file mode 100644
index 000000000000..9241e5fc7cff
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mutex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek mutex
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek mutex, namely MUTEX, is used to send the triggers signals called
+  Start Of Frame (SOF) / End Of Frame (EOF) to each sub-modules on the display
+  data path or MDP data path.
+  In some SoC, such as mt2701, MUTEX could be a hardware mutex which protects
+  the shadow register.
+  MUTEX device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-disp-mutex
+      - mediatek,mt2712-disp-mutex
+      - mediatek,mt6795-disp-mutex
+      - mediatek,mt8167-disp-mutex
+      - mediatek,mt8173-disp-mutex
+      - mediatek,mt8183-disp-mutex
+      - mediatek,mt8186-disp-mutex
+      - mediatek,mt8186-mdp3-mutex
+      - mediatek,mt8192-disp-mutex
+      - mediatek,mt8195-disp-mutex
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: MUTEX Clock
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mutex: mutex@14020000 {
+            compatible = "mediatek,mt8173-disp-mutex";
+            reg = <0 0x14020000 0 0x1000>;
+            interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_MUTEX_32K>;
+            mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
+                                  <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
new file mode 100644
index 000000000000..69afb329e5f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,wdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Write Direct Memory Access
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek Write Direct Memory Access(WDMA) component used to write
+  the data into DMA.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-wdma
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_wdma: mdp3-wdma@14006000 {
+      compatible = "mediatek,mt8183-mdp3-wdma";
+      reg = <0x14006000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_WDMA0_SOF>,
+                            <CMDQ_EVENT_MDP_WDMA0_EOF>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_WDMA0>;
+      iommus = <&iommu>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
new file mode 100644
index 000000000000..d911fa2d40ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Smart Voltage Scaling (SVS) Device Tree Bindings
+
+maintainers:
+  - Roger Lu <roger.lu@mediatek.com>
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Kevin Hilman <khilman@kernel.org>
+
+description: |+
+  The SVS engine is a piece of hardware which has several
+  controllers(banks) for calculating suitable voltage to
+  different power domains(CPU/GPU/CCI) according to
+  chip process corner, temperatures and other factors. Then DVFS
+  driver could apply SVS bank voltage to PMIC/Buck.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-svs
+      - mediatek,mt8192-svs
+
+  reg:
+    maxItems: 1
+    description: Address range of the MTK SVS controller.
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Main clock for MTK SVS controller to work.
+
+  clock-names:
+    const: main
+
+  nvmem-cells:
+    minItems: 1
+    description:
+      Phandle to the calibration data provided by a nvmem device.
+    items:
+      - description: SVS efuse for SVS controller
+      - description: Thermal efuse for SVS controller
+
+  nvmem-cell-names:
+    items:
+      - const: svs-calibration-data
+      - const: t-calibration-data
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: svs_rst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        svs@1100b000 {
+            compatible = "mediatek,mt8183-svs";
+            reg = <0 0x1100b000 0 0x1000>;
+            interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&infracfg CLK_INFRA_THERM>;
+            clock-names = "main";
+            nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
+            nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
index 7a32404c6114..d24e2bc444be 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
@@ -20,27 +20,32 @@ Required properties in pwrap device node.
 - compatible:
 	"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
 	"mediatek,mt6765-pwrap" for MT6765 SoCs
+	"mediatek,mt6779-pwrap" for MT6779 SoCs
 	"mediatek,mt6797-pwrap" for MT6797 SoCs
+	"mediatek,mt6873-pwrap" for MT6873/8192 SoCs
 	"mediatek,mt7622-pwrap" for MT7622 SoCs
 	"mediatek,mt8135-pwrap" for MT8135 SoCs
 	"mediatek,mt8173-pwrap" for MT8173 SoCs
 	"mediatek,mt8183-pwrap" for MT8183 SoCs
+	"mediatek,mt8186-pwrap" for MT8186 SoCs
+	"mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap" for MT8188 SoCs
+	"mediatek,mt8195-pwrap" for MT8195 SoCs
 	"mediatek,mt8516-pwrap" for MT8516 SoCs
 - interrupts: IRQ for pwrap in SOC
-- reg-names: Must include the following entries:
+- reg-names: "pwrap" is required; "pwrap-bridge" is optional.
   "pwrap": Main registers base
   "pwrap-bridge": bridge base (IP Pairing)
 - reg: Must contain an entry for each entry in reg-names.
-- reset-names: Must include the following entries:
-  "pwrap"
-  "pwrap-bridge" (IP Pairing)
-- resets: Must contain an entry for each entry in reset-names.
 - clock-names: Must include the following entries:
   "spi": SPI bus clock
   "wrap": Main module clock
 - clocks: Must contain an entry for each entry in clock-names.
 
 Optional properities:
+- reset-names: Some SoCs include the following entries:
+  "pwrap"
+  "pwrap-bridge" (IP Pairing)
+- resets: Must contain an entry for each entry in reset-names.
 - pmic: Using either MediaTek PMIC MFD as the child device of pwrap
   See the following for child node definitions:
   Documentation/devicetree/bindings/mfd/mt6397.txt
diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
new file mode 100644
index 000000000000..33748a061898
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Timer Counter Block
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+  The Atmel (now Microchip) SoCs have timers named Timer Counter Block. Each
+  timer has three channels with two counters each.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - atmel,at91rm9200-tcb
+          - atmel,at91sam9x5-tcb
+          - atmel,sama5d2-tcb
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      List of interrupts. One interrupt per TCB channel if available or one
+      interrupt for the TC block
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    description:
+      List of clock names. Always includes t0_clk and slow clk. Also includes
+      t1_clk and t2_clk if a clock per channel is available.
+    minItems: 2
+    maxItems: 4
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^timer@[0-2]$":
+    description: The timer block channels that are used as timers or counters.
+    type: object
+    properties:
+      compatible:
+        items:
+          - enum:
+              - atmel,tcb-timer
+              - atmel,tcb-pwm
+              - microchip,tcb-capture
+      reg:
+        description:
+          List of channels to use for this particular timer. In Microchip TCB capture
+          mode channels are registered as a counter devices, for the qdec mode TCB0's
+          channel <0> and <1> are required.
+
+        minItems: 1
+        maxItems: 3
+    required:
+      - compatible
+      - reg
+
+  "^pwm@[0-2]$":
+    description: The timer block channels that are used as PWMs.
+    $ref: /schemas/pwm/pwm.yaml#
+    type: object
+    properties:
+      compatible:
+        const: atmel,tcb-pwm
+      reg:
+        description:
+          TCB channel to use for this PWM.
+        enum: [ 0, 1, 2 ]
+
+      "#pwm-cells":
+        description:
+          The only third cell flag supported by this binding is
+          PWM_POLARITY_INVERTED.
+        const: 3
+
+    required:
+      - compatible
+      - reg
+      - "#pwm-cells"
+
+    additionalProperties: false
+
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,sama5d2-tcb
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: t0_clk
+            - const: gclk
+            - const: slow_clk
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 4
+        clock-names:
+          oneOf:
+            - items:
+                - const: t0_clk
+                - const: slow_clk
+            - items:
+                - const: t0_clk
+                - const: t1_clk
+                - const: t2_clk
+                - const: slow_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* One interrupt per TC block: */
+        tcb0: timer@fff7c000 {
+                compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0xfff7c000 0x100>;
+                interrupts = <18 4>;
+                clocks = <&tcb0_clk>, <&clk32k>;
+                clock-names = "t0_clk", "slow_clk";
+
+                timer@0 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <0>, <1>;
+                };
+
+                timer@2 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <2>;
+                };
+        };
+
+    /* One interrupt per TC channel in a TC block: */
+        tcb1: timer@fffdc000 {
+                compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0xfffdc000 0x100>;
+                interrupts = <26 4>, <27 4>, <28 4>;
+                clocks = <&tcb1_clk>, <&clk32k>;
+                clock-names = "t0_clk", "slow_clk";
+
+                timer@0 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <0>;
+                };
+
+                timer@1 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <1>;
+                };
+
+                pwm@2 {
+                        compatible = "atmel,tcb-pwm";
+                        reg = <2>;
+                        #pwm-cells = <3>;
+                };
+         };
+    /* TCB0 Capture with QDEC: */
+        timer@f800c000 {
+                compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0xfff7c000 0x100>;
+                interrupts = <18 4>;
+                clocks = <&tcb0_clk>, <&clk32k>;
+                clock-names = "t0_clk", "slow_clk";
+
+                timer@0 {
+                        compatible = "microchip,tcb-capture";
+                        reg = <0>, <1>;
+                };
+
+                timer@2 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <2>;
+                };
+        };
diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
new file mode 100644
index 000000000000..04ffee3a7c59
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  PolarFire SoC devices include a microcontroller acting as the system controller,
+  which provides "services" to the main processor and to the FPGA fabric. These
+  services include hardware rng, reprogramming of the FPGA and verfification of the
+  eNVM contents etc. More information on these services can be found online, at
+  https://onlinedocs.microchip.com/pr/GUID-1409CF11-8EF9-4C24-A94E-70979A688632-en-US-1/index.html
+
+  Communication with the system controller is done via a mailbox, of which the client
+  portion is documented here.
+
+properties:
+  mboxes:
+    maxItems: 1
+
+  compatible:
+    const: microchip,mpfs-sys-controller
+
+required:
+  - compatible
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    syscontroller {
+      compatible = "microchip,mpfs-sys-controller";
+      mboxes = <&mbox 0>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
deleted file mode 100644
index 4fc571e78f01..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-Qualcomm Always-On Subsystem side channel binding
-
-This binding describes the hardware component responsible for side channel
-requests to the always-on subsystem (AOSS), used for certain power management
-requests that is not handled by the standard RPMh interface. Each client in the
-SoC has it's own block of message RAM and IRQ for communication with the AOSS.
-The protocol used to communicate in the message RAM is known as Qualcomm
-Messaging Protocol (QMP)
-
-The AOSS side channel exposes control over a set of resources, used to control
-a set of debug related clocks and to affect the low power state of resources
-related to the secondary subsystems. These resources are exposed as a set of
-power-domains.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,sc7180-aoss-qmp"
-		    "qcom,sdm845-aoss-qmp"
-		    "qcom,sm8150-aoss-qmp"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the message RAM for this
-		    client's communication with the AOSS
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the AOSS message IRQ for this client
-
-- mboxes:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the mailbox representing the outgoing doorbell
-		    in APCS for this client, as described in mailbox/mailbox.txt
-
-- #clock-cells:
-	Usage: optional
-	Value type: <u32>
-	Definition: must be 0
-		    The single clock represents the QDSS clock.
-
-- #power-domain-cells:
-	Usage: optional
-	Value type: <u32>
-	Definition: must be 1
-		    The provided power-domains are:
-		    CDSP state (0), LPASS state (1), modem state (2), SLPI
-		    state (3), SPSS state (4) and Venus state (5).
-
-= SUBNODES
-The AOSS side channel also provides the controls for three cooling devices,
-these are expressed as subnodes of the QMP node. The name of the node is used
-to identify the resource and must therefor be "cx", "mx" or "ebi".
-
-- #cooling-cells:
-	Usage: optional
-	Value type: <u32>
-	Definition: must be 2
-
-= EXAMPLE
-
-The following example represents the AOSS side-channel message RAM and the
-mechanism exposing the power-domains, as found in SDM845.
-
-  aoss_qmp: qmp@c300000 {
-	  compatible = "qcom,sdm845-aoss-qmp";
-	  reg = <0x0c300000 0x100000>;
-	  interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
-	  mboxes = <&apss_shared 0>;
-
-	  #power-domain-cells = <1>;
-
-	  cx_cdev: cx {
-		#cooling-cells = <2>;
-	  };
-
-	  mx_cdev: mx {
-		#cooling-cells = <2>;
-	  };
-  };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
new file mode 100644
index 000000000000..a4eeb7e158e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,aoss-qmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Always-On Subsystem side channel binding
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This binding describes the hardware component responsible for side channel
+  requests to the always-on subsystem (AOSS), used for certain power management
+  requests that is not handled by the standard RPMh interface. Each client in the
+  SoC has its own block of message RAM and IRQ for communication with the AOSS.
+  The protocol used to communicate in the message RAM is known as Qualcomm
+  Messaging Protocol (QMP)
+
+  The AOSS side channel exposes control over a set of resources, used to control
+  a set of debug related clocks and to affect the low power state of resources
+  related to the secondary subsystems.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sc7180-aoss-qmp
+          - qcom,sc7280-aoss-qmp
+          - qcom,sc8180x-aoss-qmp
+          - qcom,sdm845-aoss-qmp
+          - qcom,sm6350-aoss-qmp
+          - qcom,sm8150-aoss-qmp
+          - qcom,sm8250-aoss-qmp
+          - qcom,sm8350-aoss-qmp
+          - qcom,sm8450-aoss-qmp
+      - const: qcom,aoss-qmp
+
+  reg:
+    maxItems: 1
+    description:
+      The base address and size of the message RAM for this client's
+      communication with the AOSS
+
+  interrupts:
+    maxItems: 1
+    description:
+      Should specify the AOSS message IRQ for this client
+
+  mboxes:
+    maxItems: 1
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client, as described in mailbox/mailbox.txt
+
+  "#clock-cells":
+    const: 0
+    description:
+      The single clock represents the QDSS clock.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - mboxes
+  - "#clock-cells"
+
+additionalProperties: false
+
+patternProperties:
+  "^(cx|mx|ebi)$":
+    type: object
+    description:
+      The AOSS side channel also provides the controls for three cooling devices,
+      these are expressed as subnodes of the QMP node. The name of the node is
+      used to identify the resource and must therefor be "cx", "mx" or "ebi".
+
+    properties:
+      "#cooling-cells":
+        const: 2
+
+    required:
+      - "#cooling-cells"
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    aoss_qmp: qmp@c300000 {
+      compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
+      reg = <0x0c300000 0x100000>;
+      interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+      mboxes = <&apss_shared 0>;
+
+      #clock-cells = <0>;
+
+      cx_cdev: cx {
+        #cooling-cells = <2>;
+      };
+
+      mx_cdev: mx {
+        #cooling-cells = <2>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
deleted file mode 100644
index db501269f47b..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-Qualcomm APR (Asynchronous Packet Router) binding
-
-This binding describes the Qualcomm APR. APR is a IPC protocol for
-communication between Application processor and QDSP. APR is mainly
-used for audio/voice services on the QDSP.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2"
-
-- qcom,apr-domain
-	Usage: required
-	Value type: <u32>
-	Definition: Destination processor ID.
-	Possible values are :
-			1 - APR simulator
-			2 - PC
-			3 - MODEM
-			4 - ADSP
-			5 - APPS
-			6 - MODEM2
-			7 - APPS2
-
-= APR SERVICES
-Each subnode of the APR node represents service tied to this apr. The name
-of the nodes are not important. The properties of these nodes are defined
-by the individual bindings for the specific service
-- All APR services MUST contain the following property:
-
-- reg
-	Usage: required
-	Value type: <u32>
-	Definition: APR Service ID
-	Possible values are :
-			3 - DSP Core Service
-			4 - Audio Front End Service.
-			5 - Voice Stream Manager Service.
-			6 - Voice processing manager.
-			7 - Audio Stream Manager Service.
-			8 - Audio Device Manager Service.
-			9 - Multimode voice manager.
-			10 - Core voice stream.
-			11 - Core voice processor.
-			12 - Ultrasound stream manager.
-			13 - Listen stream manager.
-
-= EXAMPLE
-The following example represents a QDSP based sound card on a MSM8996 device
-which uses apr as communication between Apps and QDSP.
-
-	apr {
-		compatible = "qcom,apr-v2";
-		qcom,apr-domain = <APR_DOMAIN_ADSP>;
-
-		q6core@3 {
-			compatible = "qcom,q6core";
-			reg = <APR_SVC_ADSP_CORE>;
-		};
-
-		q6afe@4 {
-			compatible = "qcom,q6afe";
-			reg = <APR_SVC_AFE>;
-
-			dais {
-				#sound-dai-cells = <1>;
-				hdmi@1 {
-					reg = <1>;
-				};
-			};
-		};
-
-		q6asm@7 {
-			compatible = "qcom,q6asm";
-			reg = <APR_SVC_ASM>;
-			...
-		};
-
-		q6adm@8 {
-			compatible = "qcom,q6adm";
-			reg = <APR_SVC_ADM>;
-			...
-		};
-	};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
new file mode 100644
index 000000000000..f47491aab3b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
@@ -0,0 +1,271 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm APR/GPR (Asynchronous/Generic Packet Router) binding
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm APR/GPR, APR/GPR is a IPC protocol for
+  communication between Application processor and QDSP. APR/GPR is mainly
+  used for audio/voice services on the QDSP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,apr-v2
+      - qcom,gpr
+
+  power-domains:
+    maxItems: 1
+
+  qcom,apr-domain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4, 5, 6, 7]
+    description:
+      Selects the processor domain for apr
+        1 = APR simulator
+        2 = PC Domain
+        3 = Modem Domain
+        4 = ADSP Domain
+        5 = Application processor Domain
+        6 = Modem2 Domain
+        7 = Application Processor2 Domain
+    deprecated: true
+
+  qcom,domain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 7
+    description:
+      Selects the processor domain for apr
+        1 = APR simulator
+        2 = PC Domain
+        3 = Modem Domain
+        4 = ADSP Domain
+        5 = Application processor Domain
+        6 = Modem2 Domain
+        7 = Application Processor2 Domain
+      Selects the processor domain for gpr
+        1 = Modem Domain
+        2 = Audio DSP Domain
+        3 = Application Processor Domain
+
+  qcom,glink-channels:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Channel name used for the communication
+    items:
+      - const: apr_audio_svc
+
+  qcom,intents:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      List of (size, amount) pairs describing what intents should be
+      preallocated for this virtual channel. This can be used to tweak the
+      default intents available for the channel to meet expectations of the
+      remote.
+
+  qcom,smd-channels:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Channel name used for the communication
+    items:
+      - const: apr_audio_svc
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+#APR/GPR Services
+patternProperties:
+  "^service@[1-9a-d]$":
+    type: object
+    description:
+      APR/GPR node's client devices use subnodes for desired static port services.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,q6core
+          - qcom,q6asm
+          - qcom,q6afe
+          - qcom,q6adm
+          - qcom,q6apm
+          - qcom,q6prm
+
+      reg:
+        minimum: 1
+        maximum: 13
+        description:
+          APR Service ID
+            3 = DSP Core Service
+            4 = Audio  Front End Service.
+            5 = Voice Stream Manager Service.
+            6 = Voice processing manager.
+            7 = Audio Stream Manager Service.
+            8 = Audio Device Manager Service.
+            9 = Multimode voice manager.
+            10 = Core voice stream.
+            11 = Core voice processor.
+            12 = Ultrasound stream manager.
+            13 = Listen stream manager.
+          GPR Service ID
+            1 = Audio Process Manager Service
+            2 = Proxy Resource Manager Service.
+            3 = AMDB Service.
+            4 = Voice processing manager.
+
+      clock-controller:
+        $ref: /schemas/sound/qcom,q6dsp-lpass-clocks.yaml#
+        description: Qualcomm DSP LPASS clock controller
+        unevaluatedProperties: false
+
+      dais:
+        type: object
+        oneOf:
+          - $ref: /schemas/sound/qcom,q6apm-dai.yaml#
+          - $ref: /schemas/sound/qcom,q6dsp-lpass-ports.yaml#
+          - $ref: /schemas/sound/qcom,q6asm-dais.yaml#
+        unevaluatedProperties: false
+        description: Qualcomm DSP audio ports
+
+      routing:
+        type: object
+        $ref: /schemas/sound/qcom,q6adm-routing.yaml#
+        unevaluatedProperties: false
+        description: Qualcomm DSP LPASS audio routing
+
+      qcom,protection-domain:
+        $ref: /schemas/types.yaml#/definitions/string-array
+        description: protection domain service name and path for apr service
+          possible values are
+          "avs/audio", "msm/adsp/audio_pd".
+          "kernel/elf_loader", "msm/modem/wlan_pd".
+          "tms/servreg", "msm/adsp/audio_pd".
+          "tms/servreg", "msm/modem/wlan_pd".
+          "tms/servreg", "msm/slpi/sensor_pd".
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              enum:
+                - qcom,q6afe
+        then:
+          properties:
+            dais:
+              properties:
+                compatible:
+                  const: qcom,q6afe-dais
+
+      - if:
+          properties:
+            compatible:
+              enum:
+                - qcom,q6apm
+        then:
+          properties:
+            dais:
+              properties:
+                compatible:
+                  enum:
+                    - qcom,q6apm-dais
+                    - qcom,q6apm-lpass-dais
+
+      - if:
+          properties:
+            compatible:
+              enum:
+                - qcom,q6asm
+        then:
+          properties:
+            dais:
+              properties:
+                compatible:
+                  const: qcom,q6asm-dais
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - qcom,domain
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,gpr
+    then:
+      properties:
+        power-domains: false
+
+  - if:
+      required:
+        - qcom,glink-channels
+    then:
+      properties:
+        qcom,smd-channels: false
+
+  - if:
+      required:
+        - qcom,smd-channels
+    then:
+      properties:
+        qcom,glink-channels: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    apr {
+        compatible = "qcom,apr-v2";
+        qcom,domain = <APR_DOMAIN_ADSP>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        q6core: service@3 {
+          compatible = "qcom,q6core";
+          reg = <APR_SVC_ADSP_CORE>;
+          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+
+        q6afe: service@4 {
+          compatible = "qcom,q6afe";
+          reg = <APR_SVC_AFE>;
+          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+
+        q6asm: service@7 {
+          compatible = "qcom,q6asm";
+          reg = <APR_SVC_ASM>;
+          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+
+        q6adm: service@8 {
+          compatible = "qcom,q6adm";
+          reg = <APR_SVC_ADM>;
+          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+    };
+
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+    gpr {
+        compatible = "qcom,gpr";
+        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@1 {
+          compatible = "qcom,q6apm";
+          reg = <GPR_APM_MODULE_IID>;
+          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
new file mode 100644
index 000000000000..c98aab209bc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,eud.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Embedded USB Debugger
+
+maintainers:
+  - Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+
+description:
+  This binding is used to describe the Qualcomm Embedded USB Debugger, which is
+  mini USB-hub implemented on chip to support USB-based debug capabilities.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sc7280-eud
+      - const: qcom,eud
+
+  reg:
+    items:
+      - description: EUD Base Register Region
+      - description: EUD Mode Manager Register
+
+  interrupts:
+    description: EUD interrupt
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      These ports is to be attached to the endpoint of the DWC3 controller node
+      and type C connector node. The controller has the "usb-role-switch"
+      property.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: This port is to be attached to the DWC3 controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: This port is to be attached to the type C connector.
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    eud@88e0000 {
+           compatible = "qcom,sc7280-eud","qcom,eud";
+           reg = <0x88e0000 0x2000>,
+                 <0x88e2000 0x1000>;
+           ports {
+                   #address-cells = <1>;
+                   #size-cells = <0>;
+                   port@0 {
+                           reg = <0>;
+                           eud_ep: endpoint {
+                                   remote-endpoint = <&usb2_role_switch>;
+                           };
+                   };
+                   port@1 {
+                           reg = <1>;
+                           eud_con: endpoint {
+                                   remote-endpoint = <&con_eud>;
+                           };
+                   };
+           };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
deleted file mode 100644
index dab7ca9f250c..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-Qualcomm Technologies, Inc. GENI Serial Engine QUP Wrapper Controller
-
-Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
-is a programmable module for supporting a wide range of serial interfaces
-like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
-Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
-Wrapper controller is modeled as a node with zero or more child nodes each
-representing a serial engine.
-
-Required properties:
-- compatible:		Must be "qcom,geni-se-qup".
-- reg:			Must contain QUP register address and length.
-- clock-names:		Must contain "m-ahb" and "s-ahb".
-- clocks:		AHB clocks needed by the device.
-
-Required properties if child node exists:
-- #address-cells: 	Must be <1> for Serial Engine Address
-- #size-cells: 		Must be <1> for Serial Engine Address Size
-- ranges: 		Must be present
-
-Properties for children:
-
-A GENI based QUP wrapper controller node can contain 0 or more child nodes
-representing serial devices.  These serial devices can be a QCOM UART, I2C
-controller, SPI controller, or some combination of aforementioned devices.
-Please refer below the child node definitions for the supported serial
-interface protocols.
-
-Qualcomm Technologies Inc. GENI Serial Engine based I2C Controller
-
-Required properties:
-- compatible:		Must be "qcom,geni-i2c".
-- reg: 			Must contain QUP register address and length.
-- interrupts: 		Must contain I2C interrupt.
-- clock-names: 		Must contain "se".
-- clocks: 		Serial engine core clock needed by the device.
-- #address-cells:	Must be <1> for I2C device address.
-- #size-cells:		Must be <0> as I2C addresses have no size component.
-
-Optional property:
-- clock-frequency:	Desired I2C bus clock frequency in Hz.
-			When missing default to 100000Hz.
-
-Child nodes should conform to I2C bus binding as described in i2c.txt.
-
-Qualcomm Technologies Inc. GENI Serial Engine based UART Controller
-
-Required properties:
-- compatible:		Must be "qcom,geni-debug-uart" or "qcom,geni-uart".
-- reg: 			Must contain UART register location and length.
-- interrupts: 		Must contain UART core interrupts.
-- clock-names:		Must contain "se".
-- clocks:		Serial engine core clock needed by the device.
-
-Qualcomm Technologies Inc. GENI Serial Engine based SPI Controller
-node binding is described in
-Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt.
-
-Example:
-	geniqup@8c0000 {
-		compatible = "qcom,geni-se-qup";
-		reg = <0x8c0000 0x6000>;
-		clock-names = "m-ahb", "s-ahb";
-		clocks = <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
-			<&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		i2c0: i2c@a94000 {
-			compatible = "qcom,geni-i2c";
-			reg = <0xa94000 0x4000>;
-			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "se";
-			clocks = <&clock_gcc GCC_QUPV3_WRAP0_S5_CLK>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&qup_1_i2c_5_active>;
-			pinctrl-1 = <&qup_1_i2c_5_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		uart0: serial@a88000 {
-			compatible = "qcom,geni-debug-uart";
-			reg = <0xa88000 0x7000>;
-			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "se";
-			clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&qup_1_uart_3_active>;
-			pinctrl-1 = <&qup_1_uart_3_sleep>;
-		};
-
-	}
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
new file mode 100644
index 000000000000..2bf5293fc995
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: GENI Serial Engine QUP Wrapper Controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
+ is a programmable module for supporting a wide range of serial interfaces
+ like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
+ Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
+ Wrapper controller is modeled as a node with zero or more child nodes each
+ representing a serial engine.
+
+properties:
+  compatible:
+    enum:
+      - qcom,geni-se-qup
+
+  reg:
+    description: QUP wrapper common register address and length.
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: m-ahb
+      - const: s-ahb
+
+  clocks:
+    items:
+      - description: Master AHB Clock
+      - description: Slave AHB Clock
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    const: qup-core
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+patternProperties:
+  "spi@[0-9a-f]+$":
+    type: object
+    description: GENI serial engine based SPI controller. SPI in master mode
+                 supports up to 50MHz, up to four chip selects, programmable
+                 data path from 4 bits to 32 bits and numerous protocol
+                 variants.
+    $ref: /schemas/spi/qcom,spi-geni-qcom.yaml#
+
+  "i2c@[0-9a-f]+$":
+    type: object
+    description: GENI serial engine based I2C controller.
+    $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml#
+
+  "serial@[0-9a-f]+$":
+    type: object
+    description: GENI Serial Engine based UART Controller.
+    $ref: /schemas/serial/qcom,serial-geni-qcom.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        geniqup@8c0000 {
+            compatible = "qcom,geni-se-qup";
+            reg = <0 0x008c0000 0 0x6000>;
+            clock-names = "m-ahb", "s-ahb";
+            clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+                <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+
+            i2c0: i2c@a94000 {
+                compatible = "qcom,geni-i2c";
+                reg = <0 0xa94000 0 0x4000>;
+                interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+                clock-names = "se";
+                clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+                pinctrl-names = "default", "sleep";
+                pinctrl-0 = <&qup_1_i2c_5_active>;
+                pinctrl-1 = <&qup_1_i2c_5_sleep>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+
+            uart0: serial@a88000 {
+                compatible = "qcom,geni-uart";
+                reg = <0 0xa88000 0 0x7000>;
+                interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+                clock-names = "se";
+                clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+                pinctrl-names = "default", "sleep";
+                pinctrl-0 = <&qup_1_uart_3_active>;
+                pinctrl-1 = <&qup_1_uart_3_sleep>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
deleted file mode 100644
index fe1855f09dcc..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-QCOM GSBI (General Serial Bus Interface) Driver
-
-The GSBI controller is modeled as a node with zero or more child nodes, each
-representing a serial sub-node device that is mux'd as part of the GSBI
-configuration settings.  The mode setting will govern the input/output mode of
-the 4 GSBI IOs.
-
-Required properties:
-- compatible:	Should contain "qcom,gsbi-v1.0.0"
-- cell-index:	Should contain the GSBI index
-- reg: Address range for GSBI registers
-- clocks: required clock
-- clock-names: must contain "iface" entry
-- qcom,mode : indicates MUX value for configuration of the serial interface.
-  Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values.
-
-Optional properties:
-- qcom,crci : indicates CRCI MUX value for QUP CRCI ports.  Please reference
-  dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
-- syscon-tcsr: indicates phandle of TCSR syscon node.  Required if child uses
-  dma.
-
-Required properties if child node exists:
-- #address-cells: Must be 1
-- #size-cells: Must be 1
-- ranges: Must be present
-
-Properties for children:
-
-A GSBI controller node can contain 0 or more child nodes representing serial
-devices.  These serial devices can be a QCOM UART, I2C controller, spi
-controller, or some combination of aforementioned devices.
-
-See the following for child node definitions:
-Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
-Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
-Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
-
-Example for APQ8064:
-
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-	gsbi4@16300000 {
-		compatible = "qcom,gsbi-v1.0.0";
-		cell-index = <4>;
-		reg = <0x16300000 0x100>;
-		clocks = <&gcc GSBI4_H_CLK>;
-		clock-names = "iface";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		qcom,mode = <GSBI_PROT_I2C_UART>;
-		qcom,crci = <GSBI_CRCI_QUP>;
-
-		syscon-tcsr = <&tcsr>;
-
-		/* child nodes go under here */
-
-		i2c_qup4: i2c@16380000 {
-			compatible = "qcom,i2c-qup-v1.1.1";
-			reg = <0x16380000 0x1000>;
-			interrupts = <0 153 0>;
-
-			clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
-			clock-names = "core", "iface";
-
-			clock-frequency = <200000>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-		};
-
-		uart4:	serial@16340000 {
-			compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-			reg = <0x16340000 0x1000>,
-				<0x16300000 0x1000>;
-			interrupts = <0 152 0x0>;
-			clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
-			clock-names = "core", "iface";
-		};
-	};
-
-	tcsr: syscon@1a400000 {
-		compatible = "qcom,apq8064-tcsr", "syscon";
-		reg = <0x1a400000 0x100>;
-	};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml
new file mode 100644
index 000000000000..c33704333e49
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm General Serial Bus Interface (GSBI)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The GSBI controller is modeled as a node with zero or more child nodes, each
+  representing a serial sub-node device that is mux'd as part of the GSBI
+  configuration settings.  The mode setting will govern the input/output mode
+  of the 4 GSBI IOs.
+
+  A GSBI controller node can contain 0 or more child nodes representing serial
+  devices.  These serial devices can be a QCOM UART, I2C controller, spi
+  controller, or some combination of aforementioned devices.
+
+properties:
+  compatible:
+    const: qcom,gsbi-v1.0.0
+
+  '#address-cells':
+    const: 1
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The GSBI index.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: iface
+
+  qcom,crci:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      CRCI MUX value for QUP CRCI ports.  Please reference
+      include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+
+  qcom,mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      MUX value for configuration of the serial interface.  Please reference
+      include/dt-bindings/soc/qcom,gsbi.h for valid mux values.
+
+  '#size-cells':
+    const: 1
+
+  syscon-tcsr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of TCSR syscon node.Required if child uses dma.
+
+  ranges: true
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "spi@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/spi/qcom,spi-qup.yaml#
+
+  "i2c@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/i2c/qcom,i2c-qup.yaml#
+
+  "serial@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/serial/qcom,msm-uartdm.yaml#
+
+required:
+  - compatible
+  - cell-index
+  - clocks
+  - clock-names
+  - qcom,mode
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,gsbi.h>
+
+    gsbi@12440000 {
+        compatible = "qcom,gsbi-v1.0.0";
+        reg = <0x12440000 0x100>;
+        cell-index = <1>;
+        clocks = <&gcc GSBI1_H_CLK>;
+        clock-names = "iface";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        syscon-tcsr = <&tcsr>;
+        qcom,mode = <GSBI_PROT_I2C_UART>;
+
+        serial@12450000 {
+            compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+            reg = <0x12450000 0x100>,
+                  <0x12400000 0x03>;
+            interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+            clock-names = "core", "iface";
+        };
+
+        i2c@12460000 {
+            compatible = "qcom,i2c-qup-v1.1.1";
+            reg = <0x12460000 0x1000>;
+            pinctrl-0 = <&i2c1_pins>;
+            pinctrl-1 = <&i2c1_pins_sleep>;
+            pinctrl-names = "default", "sleep";
+            interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+            clock-names = "core", "iface";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            status = "disabled"; /* UART chosen */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
new file mode 100644
index 000000000000..4a50f1d27724
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMH RSC
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Resource Power Manager Hardened (RPMH) is the mechanism for communicating
+  with the hardened resource accelerators on Qualcomm SoCs. Requests to the
+  resources can be written to the Trigger Command Set (TCS)  registers and
+  using a (addr, val) pair and triggered. Messages in the TCS are then sent in
+  sequence over an internal bus.
+
+  The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity
+  (Resource State Coordinator a.k.a RSC) that can handle multiple sleep and
+  active/wake resource requests. Multiple such DRVs can exist in a SoC and can
+  be written to from Linux. The structure of each DRV follows the same template
+  with a few variations that are captured by the properties here.
+
+  A TCS may be triggered from Linux or triggered by the F/W after all the CPUs
+  have powered off to facilitate idle power saving. TCS could be classified as::
+    ACTIVE  - Triggered by Linux
+    SLEEP   - Triggered by F/W
+    WAKE    - Triggered by F/W
+    CONTROL - Triggered by F/W
+  See also:: <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+  The order in which they are described in the DT, should match the hardware
+  configuration.
+
+  Requests can be made for the state of a resource, when the subsystem is
+  active or idle. When all subsystems like Modem, GPU, CPU are idle, the
+  resource state will be an aggregate of the sleep votes from each of those
+  subsystems. Clients may request a sleep value for their shared resources in
+  addition to the active mode requests.
+
+  Drivers that want to use the RSC to communicate with RPMH must specify their
+  bindings as child nodes of the RSC controllers they wish to communicate with.
+
+properties:
+  compatible:
+    const: qcom,rpmh-rsc
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description:
+      The interrupt that trips when a message complete/response is received for
+      this DRV from the accelerators.
+      Number of interrupts must match number of DRV blocks.
+
+  label:
+    description:
+      Name for the RSC. The name would be used in trace logs.
+
+  qcom,drv-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The ID of the DRV in the RSC block that will be used by this controller.
+
+  qcom,tcs-config:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 4
+    maxItems: 4
+    items:
+      items:
+        - description: |
+            TCS type::
+             - ACTIVE_TCS
+             - SLEEP_TCS
+             - WAKE_TCS
+             - CONTROL_TCS
+          enum: [ 0, 1, 2, 3 ]
+        - description: Number of TCS
+    description: |
+      The tuple defining the configuration of TCS. Must have two cells which
+      describe each TCS type.  The order of the TCS must match the hardware
+      configuration.
+
+  qcom,tcs-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The offset of the TCS blocks.
+
+  reg:
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: drv-0
+      - const: drv-1
+      - const: drv-2
+      - const: drv-3
+
+  bcm-voter:
+    $ref: /schemas/interconnect/qcom,bcm-voter.yaml#
+
+  clock-controller:
+    $ref: /schemas/clock/qcom,rpmhcc.yaml#
+
+  power-controller:
+    $ref: /schemas/power/qcom,rpmpd.yaml#
+
+patternProperties:
+  '-regulators$':
+    $ref: /schemas/regulator/qcom,rpmh-regulator.yaml#
+
+required:
+  - compatible
+  - interrupts
+  - qcom,drv-id
+  - qcom,tcs-config
+  - qcom,tcs-offset
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    // For a TCS whose RSC base address is 0x179C0000 and is at a DRV id of
+    // 2, the register offsets for DRV2 start at 0D00, the register
+    // calculations are like this::
+    // DRV0: 0x179C0000
+    // DRV2: 0x179C0000 + 0x10000 = 0x179D0000
+    // DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000
+    // TCS-OFFSET: 0xD00
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+    rsc@179c0000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0x179c0000 0x10000>,
+              <0x179d0000 0x10000>,
+              <0x179e0000 0x10000>;
+        reg-names = "drv-0", "drv-1", "drv-2";
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+        label = "apps_rsc";
+        qcom,tcs-offset = <0xd00>;
+        qcom,drv-id = <2>;
+        qcom,tcs-config = <ACTIVE_TCS  2>,
+                          <SLEEP_TCS   3>,
+                          <WAKE_TCS    3>,
+                          <CONTROL_TCS 1>;
+      };
+
+  - |
+    // For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the
+    // register offsets for DRV0 start at 01C00, the register calculations are
+    // like this::
+    // DRV0: 0xAF20000
+    // TCS-OFFSET: 0x1C00
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+    rsc@af20000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0xaf20000 0x10000>;
+        reg-names = "drv-0";
+        interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+        label = "disp_rsc";
+        qcom,tcs-offset = <0x1c00>;
+        qcom,drv-id = <0>;
+        qcom,tcs-config = <ACTIVE_TCS  0>,
+                          <SLEEP_TCS   1>,
+                          <WAKE_TCS    1>,
+                          <CONTROL_TCS 0>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    rsc@18200000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0x18200000 0x10000>,
+              <0x18210000 0x10000>,
+              <0x18220000 0x10000>;
+        reg-names = "drv-0", "drv-1", "drv-2";
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+        label = "apps_rsc";
+        qcom,tcs-offset = <0xd00>;
+        qcom,drv-id = <2>;
+        qcom,tcs-config = <ACTIVE_TCS  2>,
+                          <SLEEP_TCS   3>,
+                          <WAKE_TCS    3>,
+                          <CONTROL_TCS 0>;
+
+        clock-controller {
+            compatible = "qcom,sm8350-rpmh-clk";
+            #clock-cells = <1>;
+            clock-names = "xo";
+            clocks = <&xo_board>;
+        };
+
+        power-controller {
+            compatible = "qcom,sm8350-rpmhpd";
+            #power-domain-cells = <1>;
+            operating-points-v2 = <&rpmhpd_opp_table>;
+
+            rpmhpd_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                rpmhpd_opp_ret: opp1 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+                };
+
+                rpmhpd_opp_min_svs: opp2 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+                };
+
+                rpmhpd_opp_low_svs: opp3 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+                };
+
+                rpmhpd_opp_svs: opp4 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+                };
+
+                rpmhpd_opp_svs_l1: opp5 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+                };
+
+                rpmhpd_opp_nom: opp6 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+                };
+
+                rpmhpd_opp_nom_l1: opp7 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+                };
+
+                rpmhpd_opp_nom_l2: opp8 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+                };
+
+                rpmhpd_opp_turbo: opp9 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+                };
+
+                rpmhpd_opp_turbo_l1: opp10 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+                };
+            };
+        };
+
+        bcm-voter {
+            compatible = "qcom,bcm-voter";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
deleted file mode 100644
index 616fddcd09fd..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Qualcomm Resource Power Manager (RPM) over SMD
-
-This driver is used to interface with the Resource Power Manager (RPM) found in
-various Qualcomm platforms. The RPM allows each component in the system to vote
-for state of the system resources, such as clocks, regulators and bus
-frequencies.
-
-The SMD information for the RPM edge should be filled out.  See qcom,smd.txt for
-the required edge properties.  All SMD related properties will reside within the
-RPM node itself.
-
-= SUBDEVICES
-
-The RPM exposes resources to its subnodes.  The rpm_requests node must be
-present and this subnode may contain children that designate regulator
-resources.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,rpm-apq8084"
-		    "qcom,rpm-msm8916"
-		    "qcom,rpm-msm8974"
-		    "qcom,rpm-msm8976"
-		    "qcom,rpm-msm8998"
-		    "qcom,rpm-sdm660"
-		    "qcom,rpm-qcs404"
-
-- qcom,smd-channels:
-	Usage: required
-	Value type: <string>
-	Definition: must be "rpm_requests"
-
-Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
-for information on the regulator subnodes that can exist under the rpm_requests.
-
-Example:
-
-	soc {
-		apcs: syscon@f9011000 {
-			compatible = "syscon";
-			reg = <0xf9011000 0x1000>;
-		};
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8974";
-				qcom,smd-channels = "rpm_requests";
-
-				...
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
new file mode 100644
index 000000000000..09d5bfa920f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,smd-rpm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Resource Power Manager (RPM) over SMD
+
+description: |
+  This driver is used to interface with the Resource Power Manager (RPM) found
+  in various Qualcomm platforms. The RPM allows each component in the system
+  to vote for state of the system resources, such as clocks, regulators and bus
+  frequencies.
+
+  The SMD information for the RPM edge should be filled out.  See qcom,smd.yaml
+  for the required edge properties.  All SMD related properties will reside
+  within the RPM node itself.
+
+  The RPM exposes resources to its subnodes.  The rpm_requests node must be
+  present and this subnode may contain children that designate regulator
+  resources.
+
+  Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+  for information on the regulator subnodes that can exist under the
+  rpm_requests.
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpm-apq8084
+      - qcom,rpm-ipq6018
+      - qcom,rpm-msm8226
+      - qcom,rpm-msm8909
+      - qcom,rpm-msm8916
+      - qcom,rpm-msm8936
+      - qcom,rpm-msm8953
+      - qcom,rpm-msm8974
+      - qcom,rpm-msm8976
+      - qcom,rpm-msm8996
+      - qcom,rpm-msm8998
+      - qcom,rpm-sdm660
+      - qcom,rpm-sm6115
+      - qcom,rpm-sm6125
+      - qcom,rpm-qcm2290
+      - qcom,rpm-qcs404
+
+  clock-controller:
+    $ref: /schemas/clock/qcom,rpmcc.yaml#
+    unevaluatedProperties: false
+
+  power-controller:
+    $ref: /schemas/power/qcom,rpmpd.yaml#
+
+  qcom,smd-channels:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Channel name used for the RPM communication
+    items:
+      - const: rpm_requests
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,rpm-apq8084
+          - qcom,rpm-msm8916
+          - qcom,rpm-msm8974
+          - qcom,rpm-msm8953
+then:
+  required:
+    - qcom,smd-channels
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    smd {
+        compatible = "qcom,smd";
+
+        rpm {
+            interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+            qcom,ipc = <&apcs 8 0>;
+            qcom,smd-edge = <15>;
+
+            rpm-requests {
+                compatible = "qcom,rpm-msm8916";
+                qcom,smd-channels = "rpm_requests";
+
+                clock-controller {
+                    compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+                    #clock-cells = <1>;
+                    clocks = <&xo_board>;
+                    clock-names = "xo";
+                };
+
+                power-controller {
+                    compatible = "qcom,msm8916-rpmpd";
+                    #power-domain-cells = <1>;
+                    operating-points-v2 = <&rpmpd_opp_table>;
+
+                    rpmpd_opp_table: opp-table {
+                        compatible = "operating-points-v2";
+
+                        opp-1 {
+                            opp-level = <1>;
+                        };
+                        opp-2 {
+                            opp-level = <2>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
deleted file mode 100644
index 234ae2256501..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Qualcomm Shared Memory Driver (SMD) binding
-
-This binding describes the Qualcomm Shared Memory Driver, a fifo based
-communication channel for sending data between the various subsystems in
-Qualcomm platforms.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,smd"
-
-= EDGES
-
-Each subnode of the SMD node represents a remote subsystem or a remote
-processor of some sort - or in SMD language an "edge". The name of the edges
-are not important.
-The edge is described by the following properties:
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the IRQ used by the remote processor to
-		    signal this processor about communication related updates
-
-- mboxes:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the associated doorbell in APCS, as described
-		    in mailbox/mailbox.txt
-
-- qcom,ipc:
-	Usage: required, unless mboxes is specified
-	Value type: <prop-encoded-array>
-	Definition: three entries specifying the outgoing ipc bit used for
-		    signaling the remote processor:
-		    - phandle to a syscon node representing the apcs registers
-		    - u32 representing offset to the register within the syscon
-		    - u32 representing the ipc bit within the register
-
-- qcom,smd-edge:
-	Usage: required
-	Value type: <u32>
-	Definition: the identifier of the remote processor in the smd channel
-		    allocation table
-
-- qcom,remote-pid:
-	Usage: optional
-	Value type: <u32>
-	Definition: the identifier for the remote processor as known by the rest
-		    of the system.
-
-- label:
-	Usage: optional
-	Value type: <string>
-	Definition: name of the edge, used for debugging and identification
-		    purposes. The node name will be used if this is not
-		    present.
-
-= SMD DEVICES
-
-In turn, subnodes of the "edges" represent devices tied to SMD channels on that
-"edge". The names of the devices are not important. The properties of these
-nodes are defined by the individual bindings for the SMD devices - but must
-contain the following property:
-
-- qcom,smd-channels:
-	Usage: required
-	Value type: <stringlist>
-	Definition: a list of channels tied to this device, used for matching
-		    the device to channels
-
-= EXAMPLE
-
-The following example represents a smd node, with one edge representing the
-"rpm" subsystem. For the "rpm" subsystem we have a device tied to the
-"rpm_request" channel.
-
-	apcs: syscon@f9011000 {
-		compatible = "syscon";
-		reg = <0xf9011000 0x1000>;
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8974";
-				qcom,smd-channels = "rpm_requests";
-
-				...
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
new file mode 100644
index 000000000000..063e595c12f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory Driver
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The Qualcomm Shared Memory Driver is a FIFO based communication channel for
+  sending data between the various subsystems in Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,smd
+
+patternProperties:
+  "^smd-edge|rpm$":
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+    unevaluatedProperties: false
+    description:
+      Each subnode of the SMD node represents a remote subsystem or a remote
+      processor of some sort - or in SMD language an "edge". The name of the
+      edges are not important.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # The following example represents a smd node, with one edge representing the
+  # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the
+  # "rpm_request" channel.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    shared-memory {
+        compatible = "qcom,smd";
+
+        rpm {
+            interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+            qcom,ipc = <&apcs 8 0>;
+            qcom,smd-edge = <15>;
+
+            rpm-requests {
+                compatible = "qcom,rpm-msm8974";
+                qcom,smd-channels = "rpm_requests";
+
+                clock-controller {
+                    compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+                    #clock-cells = <1>;
+                };
+
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt
deleted file mode 100644
index 9326cdf6e1b1..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Qualcomm Shared Memory Manager binding
-
-This binding describes the Qualcomm Shared Memory Manager, used to share data
-between various subsystems and OSes in Qualcomm platforms.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be:
-		    "qcom,smem"
-
-- memory-region:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: handle to memory reservation for main SMEM memory region.
-
-- qcom,rpm-msg-ram:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: handle to RPM message memory resource
-
-- hwlocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to a hwspinlock used to protect allocations from
-		    the shared memory
-
-= EXAMPLE
-The following example shows the SMEM setup for MSM8974, with a main SMEM region
-at 0xfa00000 and the RPM message ram at 0xfc428000:
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		smem_region: smem@fa00000 {
-			reg = <0xfa00000 0x200000>;
-			no-map;
-		};
-	};
-
-	smem@fa00000 {
-		compatible = "qcom,smem";
-
-		memory-region = <&smem_region>;
-		qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
-	soc {
-		rpm_msg_ram: memory@fc428000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0xfc428000 0x4000>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml
new file mode 100644
index 000000000000..4149cf2b66be
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,smem.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Shared Memory Manager binding
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This binding describes the Qualcomm Shared Memory Manager, a region of
+  reserved-memory used to share data between various subsystems and OSes in
+  Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,smem
+
+  reg:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+    description: handle to memory reservation for main SMEM memory region.
+
+  hwlocks:
+    maxItems: 1
+
+  qcom,rpm-msg-ram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: handle to RPM message memory resource
+
+  no-map: true
+
+required:
+  - compatible
+  - hwlocks
+
+oneOf:
+  - required:
+      - reg
+      - no-map
+  - required:
+      - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        smem@fa00000 {
+            compatible = "qcom,smem";
+            reg = <0xfa00000 0x200000>;
+            no-map;
+
+            hwlocks = <&tcsr_mutex 3>;
+        };
+    };
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        smem_region: smem@fa00000 {
+            reg = <0xfa00000 0x200000>;
+            no-map;
+        };
+    };
+
+    smem {
+        compatible = "qcom,smem";
+
+        memory-region = <&smem_region>;
+        qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+        hwlocks = <&tcsr_mutex 3>;
+    };
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        rpm_msg_ram: sram@fc428000 {
+            compatible = "qcom,rpm-msg-ram";
+            reg = <0xfc428000 0x4000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
deleted file mode 100644
index 49e1d72d3648..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-Qualcomm Shared Memory Point 2 Point binding
-
-The Shared Memory Point to Point (SMP2P) protocol facilitates communication of
-a single 32-bit value between two processors.  Each value has a single writer
-(the local side) and a single reader (the remote side).  Values are uniquely
-identified in the system by the directed edge (local processor ID to remote
-processor ID) and a string identifier.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,smp2p"
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: one entry specifying the smp2p notification interrupt
-
-- mboxes:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the associated doorbell in APCS, as described
-		    in mailbox/mailbox.txt
-
-- qcom,ipc:
-	Usage: required, unless mboxes is specified
-	Value type: <prop-encoded-array>
-	Definition: three entries specifying the outgoing ipc bit used for
-		    signaling the remote end of the smp2p edge:
-		    - phandle to a syscon node representing the apcs registers
-		    - u32 representing offset to the register within the syscon
-		    - u32 representing the ipc bit within the register
-
-- qcom,smem:
-	Usage: required
-	Value type: <u32 array>
-	Definition: two identifiers of the inbound and outbound smem items used
-		    for this edge
-
-- qcom,local-pid:
-	Usage: required
-	Value type: <u32>
-	Definition: specifies the identifier of the local endpoint of this edge
-
-- qcom,remote-pid:
-	Usage: required
-	Value type: <u32>
-	Definition: specifies the identifier of the remote endpoint of this edge
-
-= SUBNODES
-Each SMP2P pair contain a set of inbound and outbound entries, these are
-described in subnodes of the smp2p device node. The node names are not
-important.
-
-- qcom,entry-name:
-	Usage: required
-	Value type: <string>
-	Definition: specifies the name of this entry, for inbound entries this
-		    will be used to match against the remotely allocated entry
-		    and for outbound entries this name is used for allocating
-		    entries
-
-- interrupt-controller:
-	Usage: required for incoming entries
-	Value type: <empty>
-	Definition: marks the entry as inbound; the node should be specified
-		    as a two cell interrupt-controller as defined in
-		    "../interrupt-controller/interrupts.txt"
-		    If not specified this node will denote the outgoing entry
-
-- #interrupt-cells:
-	Usage: required for incoming entries
-	Value type: <u32>
-	Definition: must be 2 - denoting the bit in the entry and IRQ flags
-
-- #qcom,smem-state-cells:
-	Usage: required for outgoing entries
-	Value type: <u32>
-	Definition: must be 1 - denoting the bit in the entry
-
-= EXAMPLE
-The following example shows the SMP2P setup with the wireless processor,
-defined from the 8974 apps processor's point-of-view. It encompasses one
-inbound and one outbound entry:
-
-wcnss-smp2p {
-	compatible = "qcom,smp2p";
-	qcom,smem = <431>, <451>;
-
-	interrupts = <0 143 1>;
-
-	qcom,ipc = <&apcs 8 18>;
-
-	qcom,local-pid = <0>;
-	qcom,remote-pid = <4>;
-
-	wcnss_smp2p_out: master-kernel {
-		qcom,entry-name = "master-kernel";
-
-		#qcom,smem-state-cells = <1>;
-	};
-
-	wcnss_smp2p_in: slave-kernel {
-		qcom,entry-name = "slave-kernel";
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml
new file mode 100644
index 000000000000..795bd8cd4104
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smp2p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory Point 2 Point
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The Shared Memory Point to Point (SMP2P) protocol facilitates communication
+  of a single 32-bit value between two processors.  Each value has a single
+  writer (the local side) and a single reader (the remote side).  Values are
+  uniquely identified in the system by the directed edge (local processor ID to
+  remote processor ID) and a string identifier.
+
+properties:
+  compatible:
+    const: qcom,smp2p
+
+  interrupts:
+    maxItems: 1
+
+  mboxes:
+    maxItems: 1
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client.
+
+  qcom,ipc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the
+      remote end of the smp2p edge.
+
+  qcom,local-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier of the local endpoint of this edge.
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier of the remote endpoint of this edge.
+
+  qcom,smem:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      maxItems: 2
+    description:
+      Two identifiers of the inbound and outbound smem items used for this edge.
+
+patternProperties:
+  "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap$":
+    type: object
+    description:
+      Each SMP2P pair contain a set of inbound and outbound entries, these are
+      described in subnodes of the smp2p device node. The node names are not
+      important.
+
+    properties:
+      interrupt-controller:
+        description:
+          Marks the entry as inbound; the node should be specified as a two
+          cell interrupt-controller.  If not specified this node will denote
+          the outgoing entry.
+
+      '#interrupt-cells':
+        const: 2
+
+      qcom,entry-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          The name of this entry, for inbound entries this will be used to
+          match against the remotely allocated entry and for outbound entries
+          this name is used for allocating entries.
+
+      '#qcom,smem-state-cells':
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 1
+        description:
+          Required for outgoing entries.
+
+    required:
+      - qcom,entry-name
+
+    oneOf:
+      - required:
+          - interrupt-controller
+          - '#interrupt-cells'
+      - required:
+          - '#qcom,smem-state-cells'
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
+  - qcom,local-pid
+  - qcom,remote-pid
+  - qcom,smem
+
+oneOf:
+  - required:
+      - mboxes
+  - required:
+      - qcom,ipc
+
+additionalProperties: false
+
+examples:
+  # The following example shows the SMP2P setup with the wireless processor,
+  # defined from the 8974 apps processor's point-of-view. It encompasses one
+  # inbound and one outbound entry.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    shared-memory {
+        compatible = "qcom,smp2p";
+        qcom,smem = <431>, <451>;
+        interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+        qcom,ipc = <&apcs 8 18>;
+        qcom,local-pid = <0>;
+        qcom,remote-pid = <4>;
+
+        wcnss_smp2p_out: master-kernel {
+            qcom,entry-name = "master-kernel";
+            #qcom,smem-state-cells = <1>;
+        };
+
+        wcnss_smp2p_in: slave-kernel {
+            qcom,entry-name = "slave-kernel";
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
deleted file mode 100644
index 2993b5a97dd6..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-Qualcomm Shared Memory State Machine
-
-The Shared Memory State Machine facilitates broadcasting of single bit state
-information between the processors in a Qualcomm SoC. Each processor is
-assigned 32 bits of state that can be modified. A processor can through a
-matrix of bitmaps signal subscription of notifications upon changes to a
-certain bit owned by a certain remote processor.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,smsm"
-
-- qcom,ipc-N:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: three entries specifying the outgoing ipc bit used for
-		    signaling the N:th remote processor
-		    - phandle to a syscon node representing the apcs registers
-		    - u32 representing offset to the register within the syscon
-		    - u32 representing the ipc bit within the register
-
-- qcom,local-host:
-	Usage: optional
-	Value type: <u32>
-	Definition: identifier of the local processor in the list of hosts, or
-		    in other words specifier of the column in the subscription
-		    matrix representing the local processor
-		    defaults to host 0
-
-- #address-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 1
-
-- #size-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 0
-
-= SUBNODES
-Each processor's state bits are described by a subnode of the smsm device node.
-Nodes can either be flagged as an interrupt-controller to denote a remote
-processor's state bits or the local processors bits.  The node names are not
-important.
-
-- reg:
-	Usage: required
-	Value type: <u32>
-	Definition: specifies the offset, in words, of the first bit for this
-		    entry
-
-- #qcom,smem-state-cells:
-	Usage: required for local entry
-	Value type: <u32>
-	Definition: must be 1 - denotes bit number
-
-- interrupt-controller:
-	Usage: required for remote entries
-	Value type: <empty>
-	Definition: marks the entry as a interrupt-controller and the state bits
-		    to belong to a remote processor
-
-- #interrupt-cells:
-	Usage: required for remote entries
-	Value type: <u32>
-	Definition: must be 2 - denotes bit number and IRQ flags
-
-- interrupts:
-	Usage: required for remote entries
-	Value type: <prop-encoded-array>
-	Definition: one entry specifying remote IRQ used by the remote processor
-		    to signal changes of its state bits
-
-
-= EXAMPLE
-The following example shows the SMEM setup for controlling properties of the
-wireless processor, defined from the 8974 apps processor's point-of-view. It
-encompasses one outbound entry and the outgoing interrupt for the wireless
-processor.
-
-smsm {
-	compatible = "qcom,smsm";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	qcom,ipc-3 = <&apcs 8 19>;
-
-	apps_smsm: apps@0 {
-		reg = <0>;
-
-		#qcom,smem-state-cells = <1>;
-	};
-
-	wcnss_smsm: wcnss@7 {
-		reg = <7>;
-		interrupts = <0 144 1>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml
new file mode 100644
index 000000000000..db67cf043256
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smsm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory State Machine
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The Shared Memory State Machine facilitates broadcasting of single bit state
+  information between the processors in a Qualcomm SoC. Each processor is
+  assigned 32 bits of state that can be modified. A processor can through a
+  matrix of bitmaps signal subscription of notifications upon changes to a
+  certain bit owned by a certain remote processor.
+
+properties:
+  compatible:
+    const: qcom,smsm
+
+  '#address-cells':
+    const: 1
+
+  qcom,local-host:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Identifier of the local processor in the list of hosts, or in other words
+      specifier of the column in the subscription matrix representing the local
+      processor.
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^qcom,ipc-[1-4]$":
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the N:th
+      remote processor.
+
+  "@[0-9a-f]$":
+    type: object
+    description:
+      Each processor's state bits are described by a subnode of the SMSM device
+      node.  Nodes can either be flagged as an interrupt-controller to denote a
+      remote processor's state bits or the local processors bits.  The node
+      names are not important.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      interrupt-controller:
+        description:
+          Marks the entry as a interrupt-controller and the state bits to
+          belong to a remote processor.
+
+      '#interrupt-cells':
+        const: 2
+
+      interrupts:
+        maxItems: 1
+        description:
+          One entry specifying remote IRQ used by the remote processor to
+          signal changes of its state bits.
+
+      '#qcom,smem-state-cells':
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 1
+        description:
+          Required for local entry. Denotes bit number.
+
+    required:
+      - reg
+
+    oneOf:
+      - required:
+          - '#qcom,smem-state-cells'
+      - required:
+          - interrupt-controller
+          - '#interrupt-cells'
+          - interrupts
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+
+anyOf:
+  - required:
+      - qcom,ipc-1
+  - required:
+      - qcom,ipc-2
+  - required:
+      - qcom,ipc-3
+  - required:
+      - qcom,ipc-4
+
+additionalProperties: false
+
+examples:
+  # The following example shows the SMEM setup for controlling properties of
+  # the wireless processor, defined from the 8974 apps processor's
+  # point-of-view. It encompasses one outbound entry and the outgoing interrupt
+  # for the wireless processor.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    shared-memory {
+        compatible = "qcom,smsm";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        qcom,ipc-3 = <&apcs 8 19>;
+
+        apps_smsm: apps@0 {
+            reg = <0>;
+            #qcom,smem-state-cells = <1>;
+        };
+
+        wcnss_smsm: wcnss@7 {
+            reg = <7>;
+            interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
new file mode 100644
index 000000000000..f433e6e0a19f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Subsystem Power Manager binding
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Qualcomm Subsystem Power Manager, used to control
+  the peripheral logic surrounding the application cores in Qualcomm platforms.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sdm660-gold-saw2-v4.1-l2
+          - qcom,sdm660-silver-saw2-v4.1-l2
+          - qcom,msm8998-gold-saw2-v4.1-l2
+          - qcom,msm8998-silver-saw2-v4.1-l2
+          - qcom,msm8909-saw2-v3.0-cpu
+          - qcom,msm8916-saw2-v3.0-cpu
+          - qcom,msm8226-saw2-v2.1-cpu
+          - qcom,msm8974-saw2-v2.1-cpu
+          - qcom,apq8084-saw2-v2.1-cpu
+          - qcom,apq8064-saw2-v1.1-cpu
+      - const: qcom,saw2
+
+  reg:
+    description: Base address and size of the SPM register region
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    /* Example 1: SoC using SAW2 and kpss-acc-v2 CPUIdle */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "qcom,kryo";
+            device_type = "cpu";
+            enable-method = "qcom,kpss-acc-v2";
+            qcom,saw = <&saw0>;
+            reg = <0x0>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+    };
+
+    saw0: power-manager@f9089000 {
+        compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+        reg = <0xf9089000 0x1000>;
+    };
+
+  - |
+
+    /*
+     * Example 2: New-gen multi cluster SoC using SAW only for L2;
+     * This does not require any cpuidle driver, nor any cpu phandle.
+     */
+    power-manager@17812000 {
+        compatible = "qcom,msm8998-gold-saw2-v4.1-l2", "qcom,saw2";
+        reg = <0x17812000 0x1000>;
+    };
+
+    power-manager@17912000 {
+        compatible = "qcom,msm8998-silver-saw2-v4.1-l2", "qcom,saw2";
+        reg = <0x17912000 0x1000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
deleted file mode 100644
index 042a2e4159bd..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-Qualcomm WCNSS Binding
-
-This binding describes the Qualcomm WCNSS hardware. It consists of control
-block and a BT, WiFi and FM radio block, all using SMD as command channels.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be: "qcom,wcnss",
-
-- qcom,smd-channel:
-	Usage: required
-	Value type: <string>
-	Definition: standard SMD property specifying the SMD channel used for
-		    communication with the WiFi firmware.
-		    Should be "WCNSS_CTRL".
-
-- qcom,mmio:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to a node specifying the wcnss "ccu" and "dxe"
-		    register blocks. The node must be compatible with one of
-		    the following:
-		    "qcom,riva",
-		    "qcom,pronto"
-
-= SUBNODES
-The subnodes of the wcnss node are optional and describe the individual blocks in
-the WCNSS.
-
-== Bluetooth
-The following properties are defined to the bluetooth node:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be:
-		    "qcom,wcnss-bt"
-
-- local-bd-address:
-	Usage: optional
-	Value type: <u8 array>
-	Definition: see Documentation/devicetree/bindings/net/bluetooth.txt
-
-== WiFi
-The following properties are defined to the WiFi node:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,wcnss-wlan",
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the "rx" and "tx" interrupts
-
-- interrupt-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must contain "rx" and "tx"
-
-- qcom,smem-state:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should reference the tx-enable and tx-rings-empty SMEM states
-
-- qcom,smem-state-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must contain "tx-enable" and "tx-rings-empty"
-
-= EXAMPLE
-The following example represents a SMD node, with one edge representing the
-"pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks
-described; as found on the 8974 platform.
-
-smd {
-	compatible = "qcom,smd";
-
-	pronto-edge {
-		interrupts = <0 142 1>;
-
-		qcom,ipc = <&apcs 8 17>;
-		qcom,smd-edge = <6>;
-
-		wcnss {
-			compatible = "qcom,wcnss";
-			qcom,smd-channels = "WCNSS_CTRL";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qcom,mmio = <&pronto>;
-
-			bt {
-				compatible = "qcom,wcnss-bt";
-
-				/* BD address 00:11:22:33:44:55 */
-				local-bd-address = [ 55 44 33 22 11 00 ];
-			};
-
-			wlan {
-				compatible = "qcom,wcnss-wlan";
-
-				interrupts = <0 145 0>, <0 146 0>;
-				interrupt-names = "tx", "rx";
-
-				qcom,smem-state = <&apps_smsm 10>, <&apps_smsm 9>;
-				qcom,smem-state-names = "tx-enable", "tx-rings-empty";
-			};
-		};
-	};
-};
-
-soc {
-	pronto: pronto {
-		compatible = "qcom,pronto";
-
-		reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
-		reg-names = "ccu", "dxe", "pmu";
-	};
-};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
new file mode 100644
index 000000000000..5320504bb5e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,wcnss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCNSS
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  The Qualcomm WCNSS hardware consists of control block and a BT, WiFi and FM
+  radio block, all using SMD as command channels.
+
+properties:
+  compatible:
+    const: qcom,wcnss
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    default: "wlan/prima/WCNSS_qcom_wlan_nv.bin"
+    description:
+      Relative firmware image path for the WLAN NV blob.
+
+  qcom,mmio:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Reference to a node specifying the wcnss "ccu" and "dxe" register blocks.
+      The node must be compatible with one of the following::
+           - qcom,riva"
+           - qcom,pronto"
+
+  qcom,smd-channels:
+    $ref: /schemas/types.yaml#/definitions/string
+    const: WCNSS_CTRL
+    description:
+      Standard SMD property specifying the SMD channel used for communication
+      with the WiFi firmware.
+
+  bluetooth:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        const: qcom,wcnss-bt
+
+      local-bd-address:
+        $ref: /schemas/types.yaml#/definitions/uint8-array
+        maxItems: 6
+        description:
+          See Documentation/devicetree/bindings/net/bluetooth.txt
+
+    required:
+      - compatible
+
+  wifi:
+    additionalProperties: false
+    type: object
+    properties:
+      compatible:
+        const: qcom,wcnss-wlan
+
+      interrupts:
+        maxItems: 2
+
+      interrupt-names:
+        items:
+          - const: tx
+          - const: rx
+
+      qcom,smem-states:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 2
+        description:
+          Should reference the tx-enable and tx-rings-empty SMEM states.
+
+      qcom,smem-state-names:
+        items:
+          - const: tx-enable
+          - const: tx-rings-empty
+        description:
+          Names of SMEM states.
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - qcom,smem-states
+      - qcom,smem-state-names
+
+required:
+  - compatible
+  - qcom,mmio
+  - qcom,smd-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    smd-edge {
+        interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+        qcom,ipc = <&apcs 8 17>;
+        qcom,smd-edge = <6>;
+        qcom,remote-pid = <4>;
+
+        label = "pronto";
+
+        wcnss {
+            compatible = "qcom,wcnss";
+            qcom,smd-channels = "WCNSS_CTRL";
+
+            qcom,mmio = <&pronto>;
+
+            bluetooth {
+                compatible = "qcom,wcnss-bt";
+                /* BD address 00:11:22:33:44:55 */
+                local-bd-address = [ 55 44 33 22 11 00 ];
+            };
+
+            wifi {
+                compatible = "qcom,wcnss-wlan";
+
+                interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-names = "tx", "rx";
+
+                qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+                qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
new file mode 100644
index 000000000000..48eda4d0d391
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom-stats.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. (QTI) Stats bindings
+
+maintainers:
+  - Maulik Shah <mkshah@codeaurora.org>
+
+description:
+  Always On Processor/Resource Power Manager maintains statistics of the SoC
+  sleep modes involving powering down of the rails and oscillator clock.
+
+  Statistics includes SoC sleep mode type, number of times low power mode were
+  entered, time of last entry, time of last exit and accumulated sleep duration.
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpmh-stats
+      - qcom,sdm845-rpmh-stats
+      - qcom,rpm-stats
+      # For older RPM firmware versions with fixed offset for the sleep stats
+      - qcom,apq8084-rpm-stats
+      - qcom,msm8226-rpm-stats
+      - qcom,msm8916-rpm-stats
+      - qcom,msm8974-rpm-stats
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Example of rpmh sleep stats
+  - |
+    sram@c3f0000 {
+      compatible = "qcom,rpmh-stats";
+      reg = <0x0c3f0000 0x400>;
+    };
+  # Example of rpm sleep stats
+  - |
+    sram@4690000 {
+      compatible = "qcom,rpm-stats";
+      reg = <0x04690000 0x10000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt b/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
deleted file mode 100644
index 9b86d1eff219..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+++ /dev/null
@@ -1,137 +0,0 @@
-RPMH RSC:
-------------
-
-Resource Power Manager Hardened (RPMH) is the mechanism for communicating with
-the hardened resource accelerators on Qualcomm SoCs. Requests to the resources
-can be written to the Trigger Command Set (TCS)  registers and using a (addr,
-val) pair and triggered. Messages in the TCS are then sent in sequence over an
-internal bus.
-
-The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity
-(Resource State Coordinator a.k.a RSC) that can handle multiple sleep and
-active/wake resource requests. Multiple such DRVs can exist in a SoC and can
-be written to from Linux. The structure of each DRV follows the same template
-with a few variations that are captured by the properties here.
-
-A TCS may be triggered from Linux or triggered by the F/W after all the CPUs
-have powered off to facilitate idle power saving. TCS could be classified as -
-
-	ACTIVE  /* Triggered by Linux */
-	SLEEP   /* Triggered by F/W */
-	WAKE    /* Triggered by F/W */
-	CONTROL /* Triggered by F/W */
-
-The order in which they are described in the DT, should match the hardware
-configuration.
-
-Requests can be made for the state of a resource, when the subsystem is active
-or idle. When all subsystems like Modem, GPU, CPU are idle, the resource state
-will be an aggregate of the sleep votes from each of those subsystems. Clients
-may request a sleep value for their shared resources in addition to the active
-mode requests.
-
-Properties:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Should be "qcom,rpmh-rsc".
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: The first register specifies the base address of the
-		    DRV(s). The number of DRVs in the dependent on the RSC.
-	            The tcs-offset specifies the start address of the
-	            TCS in the DRVs.
-
-- reg-names:
-	Usage: required
-	Value type: <string>
-	Definition: Maps the register specified in the reg property. Must be
-	            "drv-0", "drv-1", "drv-2" etc and "tcs-offset". The
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-interrupt>
-	Definition: The interrupt that trips when a message complete/response
-	           is received for this DRV from the accelerators.
-
-- qcom,drv-id:
-	Usage: required
-	Value type: <u32>
-	Definition: The id of the DRV in the RSC block that will be used by
-		    this controller.
-
-- qcom,tcs-config:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: The tuple defining the configuration of TCS.
-	            Must have 2 cells which describe each TCS type.
-	            <type number_of_tcs>.
-	            The order of the TCS must match the hardware
-	            configuration.
-	- Cell #1 (TCS Type): TCS types to be specified -
-	            ACTIVE_TCS
-	            SLEEP_TCS
-	            WAKE_TCS
-	            CONTROL_TCS
-	- Cell #2 (Number of TCS): <u32>
-
-- label:
-	Usage: optional
-	Value type: <string>
-	Definition: Name for the RSC. The name would be used in trace logs.
-
-Drivers that want to use the RSC to communicate with RPMH must specify their
-bindings as child nodes of the RSC controllers they wish to communicate with.
-
-Example 1:
-
-For a TCS whose RSC base address is is 0x179C0000 and is at a DRV id of 2, the
-register offsets for DRV2 start at 0D00, the register calculations are like
-this -
-DRV0: 0x179C0000
-DRV2: 0x179C0000 + 0x10000 = 0x179D0000
-DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000
-TCS-OFFSET: 0xD00
-
-	apps_rsc: rsc@179c0000 {
-		label = "apps_rsc";
-		compatible = "qcom,rpmh-rsc";
-		reg = <0x179c0000 0x10000>,
-		      <0x179d0000 0x10000>,
-		      <0x179e0000 0x10000>;
-		reg-names = "drv-0", "drv-1", "drv-2";
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-		qcom,tcs-offset = <0xd00>;
-		qcom,drv-id = <2>;
-		qcom,tcs-config = <ACTIVE_TCS  2>,
-				  <SLEEP_TCS   3>,
-				  <WAKE_TCS    3>,
-				  <CONTROL_TCS 1>;
-	};
-
-Example 2:
-
-For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the
-register offsets for DRV0 start at 01C00, the register calculations are like
-this -
-DRV0: 0xAF20000
-TCS-OFFSET: 0x1C00
-
-	disp_rsc: rsc@af20000 {
-		label = "disp_rsc";
-		compatible = "qcom,rpmh-rsc";
-		reg = <0xaf20000 0x10000>;
-		reg-names = "drv-0";
-		interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-		qcom,tcs-offset = <0x1c00>;
-		qcom,drv-id = <0>;
-		qcom,tcs-config = <ACTIVE_TCS  0>,
-				  <SLEEP_TCS   1>,
-				  <WAKE_TCS    1>,
-				  <CONTROL_TCS 0>;
-	};
diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
new file mode 100644
index 000000000000..398663d21ab1
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas RZ/{G2L,V2L} System Controller (SYSC)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The RZ/{G2L,V2L}-alike System Controller (SYSC) performs system control of
+  the LSI and supports following functions,
+  - External terminal state capture function
+  - 34-bit address space access function
+  - Low power consumption control
+  - WDT stop control
+
+properties:
+  compatible:
+    enum:
+      - renesas,r9a07g043-sysc # RZ/G2UL and RZ/Five
+      - renesas,r9a07g044-sysc # RZ/G2{L,LC}
+      - renesas,r9a07g054-sysc # RZ/V2L
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: CA55/CM33 Sleep/Software Standby Mode request interrupt
+      - description: CA55 Software Standby Mode release request interrupt
+      - description: CM33 Software Standby Mode release request interrupt
+      - description: CA55 ACE Asynchronous Bridge Master/Slave interface deny request interrupt
+
+  interrupt-names:
+    items:
+      - const: lpm_int
+      - const: ca55stbydone_int
+      - const: cm33stbyr_int
+      - const: ca55_deny
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sysc: system-controller@11020000 {
+            compatible = "renesas,r9a07g044-sysc";
+            reg = <0x11020000 0x10000>;
+            interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "lpm_int", "ca55stbydone_int", "cm33stbyr_int",
+                              "ca55_deny";
+    };
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
deleted file mode 100644
index f96511aa3897..000000000000
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip General Register Files (GRF)
-
-The general register file will be used to do static set by software, which
-is composed of many registers for system control.
-
-From RK3368 SoCs, the GRF is divided into two sections,
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- PMUGRF, used for always on system
-
-On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
-
-ON RK3308 SoC, the GRF is divided into four sections:
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- DETECTGRF, used for audio codec system,
-- COREGRF, used for pvtm,
-
-Required Properties:
-
-- compatible: GRF should be one of the following:
-   - "rockchip,px30-grf", "syscon": for px30
-   - "rockchip,rk3036-grf", "syscon": for rk3036
-   - "rockchip,rk3066-grf", "syscon": for rk3066
-   - "rockchip,rk3188-grf", "syscon": for rk3188
-   - "rockchip,rk3228-grf", "syscon": for rk3228
-   - "rockchip,rk3288-grf", "syscon": for rk3288
-   - "rockchip,rk3308-grf", "syscon": for rk3308
-   - "rockchip,rk3328-grf", "syscon": for rk3328
-   - "rockchip,rk3368-grf", "syscon": for rk3368
-   - "rockchip,rk3399-grf", "syscon": for rk3399
-   - "rockchip,rv1108-grf", "syscon": for rv1108
-- compatible: DETECTGRF should be one of the following:
-   - "rockchip,rk3308-detect-grf", "syscon": for rk3308
-- compatilbe: COREGRF should be one of the following:
-   - "rockchip,rk3308-core-grf", "syscon": for rk3308
-- compatible: PMUGRF should be one of the following:
-   - "rockchip,px30-pmugrf", "syscon": for px30
-   - "rockchip,rk3368-pmugrf", "syscon": for rk3368
-   - "rockchip,rk3399-pmugrf", "syscon": for rk3399
-- compatible: SGRF should be one of the following:
-   - "rockchip,rk3288-sgrf", "syscon": for rk3288
-- compatible: USB2PHYGRF should be one of the following:
-   - "rockchip,px30-usb2phy-grf", "syscon": for px30
-   - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
-- compatible: USBGRF should be one of the following:
-   - "rockchip,rv1108-usbgrf", "syscon": for rv1108
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-Example: GRF and PMUGRF of RK3399 SoCs
-
-	pmugrf: syscon@ff320000 {
-		compatible = "rockchip,rk3399-pmugrf", "syscon";
-		reg = <0x0 0xff320000 0x0 0x1000>;
-	};
-
-	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3399-grf", "syscon";
-		reg = <0x0 0xff770000 0x0 0x10000>;
-	};
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
new file mode 100644
index 000000000000..2ed8cca79b59
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -0,0 +1,279 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip General Register Files (GRF)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - rockchip,rk3288-sgrf
+              - rockchip,rk3566-pipe-grf
+              - rockchip,rk3568-pcie3-phy-grf
+              - rockchip,rk3568-pipe-grf
+              - rockchip,rk3568-pipe-phy-grf
+              - rockchip,rk3568-usb2phy-grf
+              - rockchip,rk3588-pcie3-phy-grf
+              - rockchip,rk3588-pcie3-pipe-grf
+              - rockchip,rv1108-usbgrf
+          - const: syscon
+      - items:
+          - enum:
+              - rockchip,px30-grf
+              - rockchip,px30-pmugrf
+              - rockchip,px30-usb2phy-grf
+              - rockchip,rk3036-grf
+              - rockchip,rk3066-grf
+              - rockchip,rk3128-grf
+              - rockchip,rk3188-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3288-grf
+              - rockchip,rk3308-core-grf
+              - rockchip,rk3308-detect-grf
+              - rockchip,rk3308-grf
+              - rockchip,rk3308-usb2phy-grf
+              - rockchip,rk3328-grf
+              - rockchip,rk3328-usb2phy-grf
+              - rockchip,rk3368-grf
+              - rockchip,rk3368-pmugrf
+              - rockchip,rk3399-grf
+              - rockchip,rk3399-pmugrf
+              - rockchip,rk3568-grf
+              - rockchip,rk3568-pmugrf
+              - rockchip,rv1108-grf
+              - rockchip,rv1108-pmugrf
+              - rockchip,rv1126-grf
+              - rockchip,rv1126-pmugrf
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-grf
+
+    then:
+      properties:
+        lvds:
+          description:
+            Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-grf
+
+    then:
+      properties:
+        edp-phy:
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3066-grf
+              - rockchip,rk3188-grf
+              - rockchip,rk3288-grf
+
+    then:
+      properties:
+        usbphy:
+          type: object
+
+          $ref: "/schemas/phy/rockchip-usb-phy.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3328-grf
+
+    then:
+      properties:
+        gpio:
+          type: object
+
+          $ref: "/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#"
+
+          unevaluatedProperties: false
+
+        power-controller:
+          type: object
+
+          $ref: "/schemas/power/rockchip,power-controller.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-grf
+
+    then:
+      properties:
+        mipi-dphy-rx0:
+          type: object
+
+          $ref: "/schemas/phy/rockchip-mipi-dphy-rx0.yaml#"
+
+          unevaluatedProperties: false
+
+        pcie-phy:
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
+
+      patternProperties:
+        "phy@[0-9a-f]+$":
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-pmugrf
+              - rockchip,rk3036-grf
+              - rockchip,rk3308-grf
+              - rockchip,rk3368-pmugrf
+
+    then:
+      properties:
+        reboot-mode:
+          type: object
+
+          $ref: "/schemas/power/reset/syscon-reboot-mode.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-usb2phy-grf
+              - rockchip,rk3128-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3308-usb2phy-grf
+              - rockchip,rk3328-usb2phy-grf
+              - rockchip,rk3399-grf
+              - rockchip,rv1108-grf
+
+    then:
+      required:
+        - "#address-cells"
+        - "#size-cells"
+
+      patternProperties:
+        "usb2phy@[0-9a-f]+$":
+          type: object
+
+          $ref: "/schemas/phy/phy-rockchip-inno-usb2.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-grf
+              - rockchip,px30-pmugrf
+              - rockchip,rk3188-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3288-grf
+              - rockchip,rk3328-grf
+              - rockchip,rk3368-grf
+              - rockchip,rk3368-pmugrf
+              - rockchip,rk3399-grf
+              - rockchip,rk3399-pmugrf
+              - rockchip,rk3568-pmugrf
+              - rockchip,rv1108-grf
+              - rockchip,rv1108-pmugrf
+
+    then:
+      properties:
+        io-domains:
+          type: object
+
+          $ref: "/schemas/power/rockchip-io-domain.yaml#"
+
+          unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3399-power.h>
+    grf: syscon@ff770000 {
+      compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+      reg = <0xff770000 0x10000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      mipi_dphy_rx0: mipi-dphy-rx0 {
+        compatible = "rockchip,rk3399-mipi-dphy-rx0";
+        clocks = <&cru SCLK_MIPIDPHY_REF>,
+                 <&cru SCLK_DPHY_RX0_CFG>,
+                 <&cru PCLK_VIO_GRF>;
+        clock-names = "dphy-ref", "dphy-cfg", "grf";
+        power-domains = <&power RK3399_PD_VIO>;
+        #phy-cells = <0>;
+      };
+
+      u2phy0: usb2phy@e450 {
+        compatible = "rockchip,rk3399-usb2phy";
+        reg = <0xe450 0x10>;
+        clocks = <&cru SCLK_USB2PHY0_REF>;
+        clock-names = "phyclk";
+        #clock-cells = <0>;
+        clock-output-names = "clk_usbphy0_480m";
+
+        u2phy0_host: host-port {
+          #phy-cells = <0>;
+          interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+          interrupt-names = "linestate";
+         };
+
+        u2phy0_otg: otg-port {
+          #phy-cells = <0>;
+          interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+                       <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+                       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+          interrupt-names = "otg-bvalid", "otg-id",
+                            "linestate";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
deleted file mode 100644
index 8304eceb62e4..000000000000
--- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
+++ /dev/null
@@ -1,136 +0,0 @@
-* Rockchip Power Domains
-
-Rockchip processors include support for multiple power domains which can be
-powered up/down by software based on different application scenes to save power.
-
-Required properties for power domain controller:
-- compatible: Should be one of the following.
-	"rockchip,px30-power-controller" - for PX30 SoCs.
-	"rockchip,rk3036-power-controller" - for RK3036 SoCs.
-	"rockchip,rk3066-power-controller" - for RK3066 SoCs.
-	"rockchip,rk3128-power-controller" - for RK3128 SoCs.
-	"rockchip,rk3188-power-controller" - for RK3188 SoCs.
-	"rockchip,rk3228-power-controller" - for RK3228 SoCs.
-	"rockchip,rk3288-power-controller" - for RK3288 SoCs.
-	"rockchip,rk3328-power-controller" - for RK3328 SoCs.
-	"rockchip,rk3366-power-controller" - for RK3366 SoCs.
-	"rockchip,rk3368-power-controller" - for RK3368 SoCs.
-	"rockchip,rk3399-power-controller" - for RK3399 SoCs.
-- #power-domain-cells: Number of cells in a power-domain specifier.
-	Should be 1 for multiple PM domains.
-- #address-cells: Should be 1.
-- #size-cells: Should be 0.
-
-Required properties for power domain sub nodes:
-- reg: index of the power domain, should use macros in:
-	"include/dt-bindings/power/px30-power.h" - for PX30 type power domain.
-	"include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
-	"include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain.
-	"include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
-	"include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain.
-	"include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain.
-	"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
-	"include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
-	"include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
-	"include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
-	"include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
-- clocks (optional): phandles to clocks which need to be enabled while power domain
-	switches state.
-- pm_qos (optional): phandles to qos blocks which need to be saved and restored
-	while power domain switches state.
-
-Qos Example:
-
-	qos_gpu: qos_gpu@ffaf0000 {
-		compatible ="syscon";
-		reg = <0x0 0xffaf0000 0x0 0x20>;
-	};
-
-Example:
-
-	power: power-controller {
-		compatible = "rockchip,rk3288-power-controller";
-		#power-domain-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pd_gpu {
-			reg = <RK3288_PD_GPU>;
-			clocks = <&cru ACLK_GPU>;
-			pm_qos = <&qos_gpu>;
-		};
-	};
-
-	 power: power-controller {
-                compatible = "rockchip,rk3368-power-controller";
-                #power-domain-cells = <1>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                pd_gpu_1 {
-                        reg = <RK3368_PD_GPU_1>;
-                        clocks = <&cru ACLK_GPU_CFG>;
-                };
-        };
-
-Example 2:
-		power: power-controller {
-			compatible = "rockchip,rk3399-power-controller";
-			#power-domain-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pd_vio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <RK3399_PD_VIO>;
-
-				pd_vo {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <RK3399_PD_VO>;
-
-					pd_vopb {
-						reg = <RK3399_PD_VOPB>;
-					};
-
-					pd_vopl {
-						reg = <RK3399_PD_VOPL>;
-					};
-				};
-			};
-		};
-
-Node of a device using power domains must have a power-domains property,
-containing a phandle to the power device node and an index specifying which
-power domain to use.
-The index should use macros in:
-	"include/dt-bindings/power/px30-power.h" - for px30 type power domain.
-	"include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
-	"include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain.
-	"include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain.
-	"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
-	"include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
-	"include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
-	"include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
-	"include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain.
-
-Example of the node using power domain:
-
-	node {
-		/* ... */
-		power-domains = <&power RK3288_PD_GPU>;
-		/* ... */
-	};
-
-	node {
-                /* ... */
-                power-domains = <&power RK3368_PD_GPU_1>;
-                /* ... */
-        };
-
-	node {
-		/* ... */
-		power-domains = <&power RK3399_PD_VOPB>;
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
new file mode 100644
index 000000000000..13bb8dfcefe6
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/samsung/exynos-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series Power Management Unit (PMU)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+# Custom select to avoid matching all nodes with 'syscon'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - samsung,exynos3250-pmu
+          - samsung,exynos4210-pmu
+          - samsung,exynos4412-pmu
+          - samsung,exynos5250-pmu
+          - samsung,exynos5260-pmu
+          - samsung,exynos5410-pmu
+          - samsung,exynos5420-pmu
+          - samsung,exynos5433-pmu
+          - samsung,exynos7-pmu
+          - samsung,exynos850-pmu
+          - samsung-s5pv210-pmu
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - samsung,exynos3250-pmu
+          - samsung,exynos4210-pmu
+          - samsung,exynos4412-pmu
+          - samsung,exynos5250-pmu
+          - samsung,exynos5260-pmu
+          - samsung,exynos5410-pmu
+          - samsung,exynos5420-pmu
+          - samsung,exynos5433-pmu
+          - samsung,exynos7-pmu
+          - samsung,exynos850-pmu
+          - samsung-s5pv210-pmu
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clock-names:
+    description:
+      List of clock names for particular CLKOUT mux inputs
+    minItems: 1
+    maxItems: 32
+    items:
+      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
+
+  clocks:
+    minItems: 1
+    maxItems: 32
+
+  interrupt-controller:
+    description:
+      Some PMUs are capable of behaving as an interrupt controller (mostly
+      to wake up a suspended PMU).
+
+  '#interrupt-cells':
+    description:
+      Must be identical to the that of the parent interrupt controller.
+    const: 3
+
+  reboot-mode:
+    $ref: /schemas/power/reset/syscon-reboot-mode.yaml
+    type: object
+    description:
+      Reboot mode to alter bootloader behavior for the next boot
+
+  syscon-poweroff:
+    $ref: /schemas/power/reset/syscon-poweroff.yaml#
+    type: object
+    description:
+      Node for power off method
+
+  syscon-reboot:
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
+    type: object
+    description:
+      Node for reboot method
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-pmu
+              - samsung,exynos4210-pmu
+              - samsung,exynos4412-pmu
+              - samsung,exynos5250-pmu
+              - samsung,exynos5410-pmu
+              - samsung,exynos5420-pmu
+              - samsung,exynos5433-pmu
+    then:
+      required:
+        - '#clock-cells'
+        - clock-names
+        - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+
+    pmu_system_controller: system-controller@10040000 {
+        compatible = "samsung,exynos5250-pmu", "syscon";
+        reg = <0x10040000 0x5000>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+        interrupt-parent = <&gic>;
+        #clock-cells = <1>;
+        clock-names = "clkout16";
+        clocks = <&clock CLK_FIN_PLL>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
new file mode 100644
index 000000000000..60b49562ff69
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung's Exynos USI (Universal Serial Interface) binding
+
+maintainers:
+  - Sam Protsenko <semen.protsenko@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C).
+  USI shares almost all internal circuits within each protocol, so only one
+  protocol can be chosen at a time. USI is modeled as a node with zero or more
+  child nodes, each representing a serial sub-node device. The mode setting
+  selects which particular function will be used.
+
+properties:
+  $nodename:
+    pattern: "^usi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - const: samsung,exynosautov9-usi
+          - const: samsung,exynos850-usi
+      - enum:
+          - samsung,exynos850-usi
+
+  reg: true
+
+  clocks: true
+
+  clock-names: true
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register syscon node
+          - description: offset of SW_CONF register for this USI controller
+    description:
+      Should be phandle/offset pair. The phandle to System Register syscon node
+      (for the same domain where this USI controller resides) and the offset
+      of SW_CONF register for this USI controller.
+
+  samsung,mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Selects USI function (which serial protocol to use). Refer to
+      <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values.
+
+  samsung,clkreq-on:
+    type: boolean
+    description:
+      Enable this property if underlying protocol requires the clock to be
+      continuously provided without automatic gating. As suggested by SoC
+      manual, it should be set in case of SPI/I2C slave, UART Rx and I2C
+      multi-master mode. Usually this property is needed if USI mode is set
+      to "UART".
+
+      This property is optional.
+
+patternProperties:
+  "^i2c@[0-9a-f]+$":
+    $ref: /schemas/i2c/i2c-exynos5.yaml
+    description: Child node describing underlying I2C
+
+  "^serial@[0-9a-f]+$":
+    $ref: /schemas/serial/samsung_uart.yaml
+    description: Child node describing underlying UART/serial
+
+  "^spi@[0-9a-f]+$":
+    $ref: /schemas/spi/samsung,spi.yaml
+    description: Child node describing underlying SPI
+
+required:
+  - compatible
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+  - samsung,sysreg
+  - samsung,mode
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - samsung,exynos850-usi
+
+then:
+  properties:
+    reg:
+      maxItems: 1
+
+    clocks:
+      items:
+        - description: Bus (APB) clock
+        - description: Operating clock for UART/SPI/I2C protocol
+
+    clock-names:
+      items:
+        - const: pclk
+        - const: ipclk
+
+  required:
+    - reg
+    - clocks
+    - clock-names
+
+else:
+  properties:
+    reg: false
+    clocks: false
+    clock-names: false
+    samsung,clkreq-on: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/samsung,exynos-usi.h>
+
+    usi0: usi@138200c0 {
+        compatible = "samsung,exynos850-usi";
+        reg = <0x138200c0 0x20>;
+        samsung,sysreg = <&sysreg_peri 0x1010>;
+        samsung,mode = <USI_V2_UART>;
+        samsung,clkreq-on; /* needed for UART mode */
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        clocks = <&cmu_peri 32>, <&cmu_peri 31>;
+        clock-names = "pclk", "ipclk";
+
+        serial_0: serial@13820000 {
+            compatible = "samsung,exynos850-uart";
+            reg = <0x13820000 0xc0>;
+            interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_peri 32>, <&cmu_peri 31>;
+            clock-names = "uart", "clk_uart_baud0";
+            status = "disabled";
+        };
+
+        hsi2c_0: i2c@13820000 {
+            compatible = "samsung,exynosautov9-hsi2c";
+            reg = <0x13820000 0xc0>;
+            interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clocks = <&cmu_peri 31>, <&cmu_peri 32>;
+            clock-names = "hsi2c", "hsi2c_pclk";
+            status = "disabled";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt
deleted file mode 100644
index 59758ccce809..000000000000
--- a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* Texas Instruments K3 NavigatorSS Ring Accelerator
-
-The Ring Accelerator (RA) is a machine which converts read/write accesses
-from/to a constant address into corresponding read/write accesses from/to a
-circular data structure in memory. The RA eliminates the need for each DMA
-controller which needs to access ring elements from having to know the current
-state of the ring (base address, current offset). The DMA controller
-performs a read or write access to a specific address range (which maps to the
-source interface on the RA) and the RA replaces the address for the transaction
-with a new address which corresponds to the head or tail element of the ring
-(head for reads, tail for writes).
-
-The Ring Accelerator is a hardware module that is responsible for accelerating
-management of the packet queues. The K3 SoCs can have more than one RA instances
-
-Required properties:
-- compatible	: Must be "ti,am654-navss-ringacc";
-- reg		: Should contain register location and length of the following
-		  named register regions.
-- reg-names	: should be
-		  "rt" - The RA Ring Real-time Control/Status Registers
-		  "fifos" - The RA Queues Registers
-		  "proxy_gcfg" - The RA Proxy Global Config Registers
-		  "proxy_target" - The RA Proxy Datapath Registers
-- ti,num-rings	: Number of rings supported by RA
-- ti,sci-rm-range-gp-rings : TI-SCI RM subtype for GP ring range
-- ti,sci	: phandle on TI-SCI compatible System controller node
-- ti,sci-dev-id	: TI-SCI device id of the ring accelerator
-- msi-parent	: phandle for "ti,sci-inta" interrupt controller
-
-Optional properties:
- -- ti,dma-ring-reset-quirk : enable ringacc / udma ring state interoperability
-		  issue software w/a
-
-Example:
-
-ringacc: ringacc@3c000000 {
-	compatible = "ti,am654-navss-ringacc";
-	reg =	<0x0 0x3c000000 0x0 0x400000>,
-		<0x0 0x38000000 0x0 0x400000>,
-		<0x0 0x31120000 0x0 0x100>,
-		<0x0 0x33000000 0x0 0x40000>;
-	reg-names = "rt", "fifos",
-		    "proxy_gcfg", "proxy_target";
-	ti,num-rings = <818>;
-	ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
-	ti,dma-ring-reset-quirk;
-	ti,sci = <&dmsc>;
-	ti,sci-dev-id = <187>;
-	msi-parent = <&inta_main_udmass>;
-};
-
-client:
-
-dma_ipx: dma_ipx@<addr> {
-	...
-	ti,ringacc = <&ringacc>;
-	...
-}
diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml
new file mode 100644
index 000000000000..ddea3d41971d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/ti/k3-ringacc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments K3 NavigatorSS Ring Accelerator
+
+maintainers:
+  - Santosh Shilimkar <ssantosh@kernel.org>
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description: |
+  The Ring Accelerator (RA) is a machine which converts read/write accesses
+  from/to a constant address into corresponding read/write accesses from/to a
+  circular data structure in memory. The RA eliminates the need for each DMA
+  controller which needs to access ring elements from having to know the current
+  state of the ring (base address, current offset). The DMA controller
+  performs a read or write access to a specific address range (which maps to the
+  source interface on the RA) and the RA replaces the address for the transaction
+  with a new address which corresponds to the head or tail element of the ring
+  (head for reads, tail for writes).
+
+  The Ring Accelerator is a hardware module that is responsible for accelerating
+  management of the packet queues. The K3 SoCs can have more than one RA instances
+
+properties:
+  compatible:
+    items:
+      - const: ti,am654-navss-ringacc
+
+  reg:
+    items:
+      - description: real time registers regions
+      - description: fifos registers regions
+      - description: proxy gcfg registers regions
+      - description: proxy target registers regions
+
+  reg-names:
+    items:
+      - const: rt
+      - const: fifos
+      - const: proxy_gcfg
+      - const: proxy_target
+
+  msi-parent: true
+
+  ti,num-rings:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of rings supported by RA
+
+  ti,sci-rm-range-gp-rings:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TI-SCI RM subtype for GP ring range
+
+  ti,sci:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: phandle on TI-SCI compatible System controller node
+
+  ti,sci-dev-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TI-SCI device id of the ring accelerator
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - msi-parent
+  - ti,num-rings
+  - ti,sci-rm-range-gp-rings
+  - ti,sci
+  - ti,sci-dev-id
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ringacc: ringacc@3c000000 {
+            compatible = "ti,am654-navss-ringacc";
+            reg = <0x0 0x3c000000 0x0 0x400000>,
+                  <0x0 0x38000000 0x0 0x400000>,
+                  <0x0 0x31120000 0x0 0x100>,
+                  <0x0 0x33000000 0x0 0x40000>;
+            reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+            ti,num-rings = <818>;
+            ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+            ti,sci = <&dmsc>;
+            ti,sci-dev-id = <187>;
+            msi-parent = <&inta_main_udmass>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
deleted file mode 100644
index 6217e64309de..000000000000
--- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Texas Instruments TI-SCI Generic Power Domain
----------------------------------------------
-
-Some TI SoCs contain a system controller (like the PMMC, etc...) that is
-responsible for controlling the state of the IPs that are present.
-Communication between the host processor running an OS and the system
-controller happens through a protocol known as TI-SCI [1].
-
-[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-
-PM Domain Node
-==============
-The PM domain node represents the global PM domain managed by the PMMC, which
-in this case is the implementation as documented by the generic PM domain
-bindings in Documentation/devicetree/bindings/power/power-domain.yaml.  Because
-this relies on the TI SCI protocol to communicate with the PMMC it must be a
-child of the pmmc node.
-
-Required Properties:
---------------------
-- compatible: should be "ti,sci-pm-domain"
-- #power-domain-cells: Can be one of the following:
-			1: Containing the device id of each node
-			2: First entry should be device id
-			   Second entry should be one of the floowing:
-			   TI_SCI_PD_EXCLUSIVE: To allow device to be
-						exclusively controlled by
-						the requesting hosts.
-			   TI_SCI_PD_SHARED: To allow device to be shared
-					     by multiple hosts.
-
-Example (K2G):
--------------
-	pmmc: pmmc {
-		compatible = "ti,k2g-sci";
-		...
-
-		k2g_pds: power-controller {
-			compatible = "ti,sci-pm-domain";
-			#power-domain-cells = <1>;
-		};
-	};
-
-PM Domain Consumers
-===================
-Hardware blocks belonging to a PM domain should contain a "power-domains"
-property that is a phandle pointing to the corresponding PM domain node
-along with an index representing the device id to be passed to the PMMC
-for device control.
-
-Required Properties:
---------------------
-- power-domains: phandle pointing to the corresponding PM domain node
-		 and an ID representing the device.
-
-See http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data for the list
-of valid identifiers for k2g.
-
-Example (K2G):
---------------------
-	uart0: serial@2530c00 {
-		compatible = "ns16550a";
-		...
-		power-domains = <&k2g_pds 0x002c>;
-	};
diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
new file mode 100644
index 000000000000..9e6cb4ee9755
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/sci-pm-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI generic power domain node bindings
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+allOf:
+  - $ref: /schemas/power/power-domain.yaml#
+
+description: |
+  Some TI SoCs contain a system controller (like the Power Management Micro
+  Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
+  the state of the various hardware modules present on the SoC. Communication
+  between the host processor running an OS and the system controller happens
+  through a protocol called TI System Control Interface (TI-SCI protocol).
+
+  This PM domain node represents the global PM domain managed by the TI-SCI
+  controller. Since this relies on the TI SCI protocol to communicate with
+  the TI-SCI controller, it must be a child of the TI-SCI controller node.
+
+properties:
+  compatible:
+    const: ti,sci-pm-domain
+
+  "#power-domain-cells":
+    enum: [1, 2]
+    description:
+      The two cells represent values that the TI-SCI controller defines.
+
+      The first cell should contain the device ID.
+
+      The second cell, if cell-value is 2, should be one of the following
+      TI_SCI_PD_EXCLUSIVE - Allows the device to be exclusively controlled
+      or
+      TI_SCI_PD_SHARED - Allows the device to be shared by multiple hosts.
+      Please refer to dt-bindings/soc/ti,sci_pm_domain.h for the definitions.
+
+      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      protocol documentation for the values to be used for different devices.
+
+additionalProperties: false
+
+examples:
+  - |
+    k2g_pds: power-controller {
+        compatible = "ti,sci-pm-domain";
+        #power-domain-cells = <1>;
+    };
+
+  - |
+    k3_pds: power-controller {
+        compatible = "ti,sci-pm-domain";
+        #power-domain-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
new file mode 100644
index 000000000000..847873289f25
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -0,0 +1,520 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/ti,pruss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: |+
+  TI Programmable Real-Time Unit and Industrial Communication Subsystem
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |+
+
+  The Programmable Real-Time Unit and Industrial Communication Subsystem
+  (PRU-ICSS a.k.a. PRUSS) is present on various TI SoCs such as AM335x, AM437x,
+  Keystone 66AK2G, OMAP-L138/DA850 etc. A PRUSS consists of dual 32-bit RISC
+  cores (Programmable Real-Time Units, or PRUs), shared RAM, data and
+  instruction RAMs, some internal peripheral modules to facilitate industrial
+  communication, and an interrupt controller.
+
+  The programmable nature of the PRUs provide flexibility to implement custom
+  peripheral interfaces, fast real-time responses, or specialized data handling.
+  The common peripheral modules include the following,
+    - an Ethernet MII_RT module with two MII ports
+    - an MDIO port to control external Ethernet PHYs
+    - an Industrial Ethernet Peripheral (IEP) to manage/generate Industrial
+      Ethernet functions
+    - an Enhanced Capture Module (eCAP)
+    - an Industrial Ethernet Timer with 7/9 capture and 16 compare events
+    - a 16550-compatible UART to support PROFIBUS
+    - Enhanced GPIO with async capture and serial support
+
+  A PRU-ICSS subsystem can have up to three shared data memories. A PRU core
+  acts on a primary Data RAM (there are usually 2 Data RAMs) at its address
+  0x0, but also has access to a secondary Data RAM (primary to the other PRU
+  core) at its address 0x2000. A shared Data RAM, if present, can be accessed
+  by both the PRU cores. The Interrupt Controller (INTC) and a CFG module are
+  common to both the PRU cores. Each PRU core also has a private instruction
+  RAM, and specific register spaces for Control and Debug functionalities.
+
+  Various sub-modules within a PRU-ICSS subsystem are represented as individual
+  nodes and are defined using a parent-child hierarchy depending on their
+  integration within the IP and the SoC. These nodes are described in the
+  following sections.
+
+
+  PRU-ICSS Node
+  ==============
+  Each PRU-ICSS instance is represented as its own node with the individual PRU
+  processor cores, the memories node, an INTC node and an MDIO node represented
+  as child nodes within this PRUSS node. This node shall be a child of the
+  corresponding interconnect bus nodes or target-module nodes.
+
+  See ../../mfd/syscon.yaml for generic SysCon binding details.
+
+
+properties:
+  $nodename:
+    pattern: "^(pruss|icssg)@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - ti,am3356-pruss  # for AM335x SoC family
+      - ti,am4376-pruss0 # for AM437x SoC family and PRUSS unit 0
+      - ti,am4376-pruss1 # for AM437x SoC family and PRUSS unit 1
+      - ti,am5728-pruss  # for AM57xx SoC family
+      - ti,am625-pruss   # for K3 AM62x SoC family
+      - ti,am642-icssg   # for K3 AM64x SoC family
+      - ti,am654-icssg   # for K3 AM65x SoC family
+      - ti,j721e-icssg   # for K3 J721E SoC family
+      - ti,k2g-pruss     # for 66AK2G SoC family
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+  dma-ranges:
+    maxItems: 1
+
+  dma-coherent: true
+
+  power-domains:
+    description: |
+      This property is as per sci-pm-domain.txt.
+
+patternProperties:
+
+  memories@[a-f0-9]+$:
+    description: |
+      The various Data RAMs within a single PRU-ICSS unit are represented as a
+      single node with the name 'memories'.
+
+    type: object
+
+    properties:
+      reg:
+        minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM.
+        items:
+          - description: Address and size of the Data RAM0.
+          - description: Address and size of the Data RAM1.
+          - description: |
+              Address and size of the Shared Data RAM. Note that on AM437x one
+              of two PRUSS units don't contain Shared RAM, while the second one
+              has it.
+
+      reg-names:
+        minItems: 2
+        items:
+          - const: dram0
+          - const: dram1
+          - const: shrdram2
+
+    required:
+      - reg
+      - reg-names
+
+    additionalProperties: false
+
+  cfg@[a-f0-9]+$:
+    description: |
+      PRU-ICSS configuration space. CFG sub-module represented as a SysCon.
+
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - const: ti,pruss-cfg
+          - const: syscon
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 1
+
+      reg:
+        maxItems: 1
+
+      ranges:
+        maxItems: 1
+
+      clocks:
+        type: object
+
+        properties:
+          "#address-cells":
+            const: 1
+
+          "#size-cells":
+            const: 0
+
+        patternProperties:
+          coreclk-mux@[a-f0-9]+$:
+            description: |
+              This is applicable only for ICSSG (K3 SoCs). The ICSSG modules
+              core clock can be set to one of the 2 sources: ICSSG_CORE_CLK or
+              ICSSG_ICLK.  This node models this clock mux and should have the
+              name "coreclk-mux".
+
+            type: object
+
+            properties:
+              '#clock-cells':
+                const: 0
+
+              clocks:
+                items:
+                  - description: ICSSG_CORE Clock
+                  - description: ICSSG_ICLK Clock
+
+              assigned-clocks:
+                maxItems: 1
+
+              assigned-clock-parents:
+                maxItems: 1
+                description: |
+                  Standard assigned-clocks-parents definition used for selecting
+                  mux parent (one of the mux input).
+
+              reg:
+                maxItems: 1
+
+            required:
+              - clocks
+
+            additionalProperties: false
+
+          iepclk-mux@[a-f0-9]+$:
+            description: |
+              The IEP module can get its clock from 2 sources: ICSSG_IEP_CLK or
+              CORE_CLK (OCP_CLK in older SoCs). This node models this clock
+              mux and should have the name "iepclk-mux".
+
+            type: object
+
+            properties:
+              '#clock-cells':
+                const: 0
+
+              clocks:
+                items:
+                  - description: ICSSG_IEP Clock
+                  - description: Core Clock (OCP Clock in older SoCs)
+
+              assigned-clocks:
+                maxItems: 1
+
+              assigned-clock-parents:
+                maxItems: 1
+                description: |
+                  Standard assigned-clocks-parents definition used for selecting
+                  mux parent (one of the mux input).
+
+              reg:
+                maxItems: 1
+
+            required:
+              - clocks
+
+            additionalProperties: false
+
+        additionalProperties: false
+
+  iep@[a-f0-9]+$:
+    description: |
+      Industrial Ethernet Peripheral to manage/generate Industrial Ethernet
+      functions such as time stamping. Each PRUSS has either 1 IEP (on AM335x,
+      AM437x, AM57xx & 66AK2G SoCs) or 2 IEPs (on K3 AM65x, J721E & AM64x SoCs).
+      IEP is used for creating PTP clocks and generating PPS signals.
+
+    type: object
+
+  mii-rt@[a-f0-9]+$:
+    description: |
+      Real-Time Ethernet to support multiple industrial communication protocols.
+      MII-RT sub-module represented as a SysCon.
+
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - const: ti,pruss-mii
+          - const: syscon
+
+      reg:
+        maxItems: 1
+
+    additionalProperties: false
+
+  mii-g-rt@[a-f0-9]+$:
+    description: |
+      The Real-time Media Independent Interface to support multiple industrial
+      communication protocols (G stands for Gigabit). MII-G-RT sub-module
+      represented as a SysCon.
+
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - const: ti,pruss-mii-g
+          - const: syscon
+
+      reg:
+        maxItems: 1
+
+    additionalProperties: false
+
+  interrupt-controller@[a-f0-9]+$:
+    description: |
+      PRUSS INTC Node. Each PRUSS has a single interrupt controller instance
+      that is common to all the PRU cores. This should be represented as an
+      interrupt-controller node.
+    $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml#
+    type: object
+
+  mdio@[a-f0-9]+$:
+    description: |
+      MDIO Node. Each PRUSS has an MDIO module that can be used to control
+      external PHYs. The MDIO module used within the PRU-ICSS is an instance of
+      the MDIO Controller used in TI Davinci SoCs.
+    $ref: /schemas/net/ti,davinci-mdio.yaml#
+    type: object
+
+  "^(pru|rtu|txpru)@[0-9a-f]+$":
+    description: |
+      PRU Node. Each PRUSS has dual PRU cores, each represented as a RemoteProc
+      device through a PRU child node each. Each node can optionally be rendered
+      inactive by using the standard DT string property, "status". The ICSSG IP
+      present on K3 SoCs have additional auxiliary PRU cores with slightly
+      different IP integration.
+    $ref: /schemas/remoteproc/ti,pru-rproc.yaml#
+    type: object
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+additionalProperties: false
+
+# Due to inability of correctly verifying sub-nodes with an @address through
+# the "required" list, the required sub-nodes below are commented out for now.
+
+#required:
+# - memories
+# - interrupt-controller
+# - pru
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,k2g-pruss
+              - ti,am654-icssg
+              - ti,j721e-icssg
+              - ti,am642-icssg
+    then:
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,k2g-pruss
+    then:
+      required:
+        - dma-coherent
+
+examples:
+  - |
+
+    /* Example 1 AM33xx PRU-ICSS */
+    pruss: pruss@0 {
+        compatible = "ti,am3356-pruss";
+        reg = <0x0 0x80000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pruss_mem: memories@0 {
+            reg = <0x0 0x2000>,
+                  <0x2000 0x2000>,
+                  <0x10000 0x3000>;
+            reg-names = "dram0", "dram1", "shrdram2";
+        };
+
+        pruss_cfg: cfg@26000 {
+            compatible = "ti,pruss-cfg", "syscon";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x26000 0x2000>;
+            ranges = <0x00 0x26000 0x2000>;
+
+            clocks {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                pruss_iepclk_mux: iepclk-mux@30 {
+                    reg = <0x30>;
+                    #clock-cells = <0>;
+                    clocks = <&l3_gclk>,        /* icss_iep */
+                             <&pruss_ocp_gclk>; /* icss_ocp */
+                };
+            };
+        };
+
+        pruss_mii_rt: mii-rt@32000 {
+            compatible = "ti,pruss-mii", "syscon";
+            reg = <0x32000 0x58>;
+        };
+
+        pruss_intc: interrupt-controller@20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupt-controller;
+            #interrupt-cells = <3>;
+            interrupts = <20 21 22 23 24 25 26 27>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4", "host_intr5",
+                              "host_intr6", "host_intr7";
+        };
+
+        pru0: pru@34000 {
+            compatible = "ti,am3356-pru";
+            reg = <0x34000 0x2000>,
+                  <0x22000 0x400>,
+                  <0x22400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am335x-pru0-fw";
+        };
+
+        pru1: pru@38000 {
+            compatible = "ti,am3356-pru";
+            reg = <0x38000 0x2000>,
+                  <0x24000 0x400>,
+                  <0x24400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am335x-pru1-fw";
+        };
+
+        pruss_mdio: mdio@32400 {
+            compatible = "ti,davinci_mdio";
+            reg = <0x32400 0x90>;
+            clocks = <&dpll_core_m4_ck>;
+            clock-names = "fck";
+            bus_freq = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+
+  - |
+
+    /* Example 2 AM43xx PRU-ICSS with PRUSS1 node */
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pruss1: pruss@0 {
+        compatible = "ti,am4376-pruss1";
+        reg = <0x0 0x40000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pruss1_mem: memories@0 {
+            reg = <0x0 0x2000>,
+                  <0x2000 0x2000>,
+                  <0x10000 0x8000>;
+            reg-names = "dram0", "dram1", "shrdram2";
+        };
+
+        pruss1_cfg: cfg@26000 {
+            compatible = "ti,pruss-cfg", "syscon";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x26000 0x2000>;
+            ranges = <0x00 0x26000 0x2000>;
+
+            clocks {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                pruss1_iepclk_mux: iepclk-mux@30 {
+                    reg = <0x30>;
+                    #clock-cells = <0>;
+                    clocks = <&sysclk_div>,     /* icss_iep */
+                             <&pruss_ocp_gclk>; /* icss_ocp */
+                };
+            };
+        };
+
+        pruss1_mii_rt: mii-rt@32000 {
+            compatible = "ti,pruss-mii", "syscon";
+            reg = <0x32000 0x58>;
+        };
+
+        pruss1_intc: interrupt-controller@20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupt-controller;
+            #interrupt-cells = <3>;
+            interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4",
+                              "host_intr6", "host_intr7";
+            ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+        };
+
+        pru1_0: pru@34000 {
+            compatible = "ti,am4376-pru";
+            reg = <0x34000 0x3000>,
+                  <0x22000 0x400>,
+                  <0x22400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am437x-pru1_0-fw";
+        };
+
+        pru1_1: pru@38000 {
+            compatible = "ti,am4376-pru";
+            reg = <0x38000 0x3000>,
+                  <0x24000 0x400>,
+                  <0x24400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am437x-pru1_1-fw";
+        };
+
+        pruss1_mdio: mdio@32400 {
+            compatible = "ti,davinci_mdio";
+            reg = <0x32400 0x90>;
+            clocks = <&dpll_core_m4_ck>;
+            clock-names = "fck";
+            bus_freq = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
new file mode 100644
index 000000000000..0df41c4f60c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/wkup-m3-ipc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wakeup M3 IPC device
+
+maintainers:
+  - Dave Gerlach <d-gerlach@ti.com>
+  - Drew Fustini <dfustini@baylibre.com>
+
+description: |+
+  The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor
+  (commonly referred to as Wakeup M3 or CM3) to help with various low power tasks
+  that cannot be controlled from the MPU, like suspend/resume and certain deep
+  C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver
+  to boot the wkup_m3, it handles communication with the CM3 using IPC registers
+  present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an
+  API to allow the SoC PM code to execute specific PM tasks.
+
+  Wkup M3 Device Node
+  ====================
+  A wkup_m3_ipc device node is used to represent the IPC registers within an
+  SoC.
+
+  Support for VTT Toggle with GPIO pin
+  ====================================
+  On some boards like the AM335x EVM-SK and the AM437x GP EVM, a GPIO pin is
+  connected to the enable pin on the DDR VTT regulator. This allows the
+  regulator to be disabled upon suspend and enabled upon resume. Please note
+  that the GPIO pin must be part of the GPIO0 module as only this GPIO module
+  is in the wakeup power domain.
+
+  Support for IO Isolation
+  ========================
+  On AM437x SoCs, certain pins can be forced into an alternate state when IO
+  isolation is activated. Those pins have pad control registers prefixed by
+  'CTRL_CONF_' that contain DS0 (e.g. deep sleep) configuration bits that can
+  override the pin's existing bias (pull-up/pull-down) and value (high/low) when
+  IO isolation is active.
+
+  Support for I2C PMIC Voltage Scaling
+  ====================================
+  It is possible to pass the name of a binary file to load into the CM3 memory.
+  The binary data is the I2C sequences for the CM3 to send out to the PMIC
+  during low power mode entry.
+
+properties:
+  compatible:
+    enum:
+      - ti,am3352-wkup-m3-ipc # for AM33xx SoCs
+      - ti,am4372-wkup-m3-ipc # for AM43xx SoCs
+
+  reg:
+    description:
+      The IPC register address space to communicate with the Wakeup M3 processor
+    maxItems: 1
+
+  interrupts:
+    description: wkup_m3 interrupt that signals the MPU
+    maxItems: 1
+
+  ti,rproc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the wkup_m3 rproc node so the IPC driver can boot it
+
+  mboxes:
+    description:
+      phandles used by IPC framework to get correct mbox
+      channel for communication. Must point to appropriate
+      mbox_wkupm3 child node.
+    maxItems: 1
+
+  firmware-name:
+    description:
+      Name of binary file with I2C sequences for PMIC voltage scaling
+
+  ti,vtt-gpio-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: GPIO pin connected to enable pin on VTT regulator
+
+  ti,set-io-isolation:
+    type: boolean
+    description:
+      If this property is present, then the wkup_m3_ipc driver will instruct
+      the CM3 firmware to activate IO isolation when suspending to deep sleep.
+      This can be leveraged by a board design to put other devices on the board
+      into a low power state.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: ti,am4372-wkup-m3-ipc
+    then:
+      properties:
+        ti,set-io-isolation: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ti,rproc
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    /* Example for AM335x SoC */
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        am335x_mailbox: mailbox {
+            #mbox-cells = <1>;
+        };
+
+        wkup_m3_ipc@1324 {
+           compatible = "ti,am3352-wkup-m3-ipc";
+           reg = <0x1324 0x24>;
+           interrupts = <78>;
+           ti,rproc = <&wkup_m3>;
+           mboxes = <&am335x_mailbox &mbox_wkupm3>;
+           ti,vtt-gpio-pin = <7>;
+           firmware-name = "am335x-evm-scale-data.bin";
+        };
+    };
+
+  - |
+    /*
+     * Example for AM473x SoC:
+     * On the AM437x-GP-EVM board, gpio5_7 is wired to enable pin of the DDR VTT
+     * regulator. The 'ddr_vtt_toggle_default' pinmux node configures gpio5_7
+     * for pull-up during normal system operation. However, the DS0 (deep sleep)
+     * state of the pin is configured for pull-down and thus the VTT regulator
+     * will be disabled to save power when IO isolation is active. Note that
+     * this method is an alternative to using the 'ti,vtt-gpio-pin' property.
+     */
+    #include <dt-bindings/pinctrl/am43xx.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        am437x_mailbox: mailbox {
+            #mbox-cells = <1>;
+        };
+
+        am43xx_pinmux {
+            pinctrl-names = "default";
+            pinctrl-0 = <&ddr3_vtt_toggle_default>;
+
+            ddr3_vtt_toggle_default: ddr_vtt_toggle_default {
+                 pinctrl-single,pins = <
+                    0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7)
+                 >;
+            };
+        };
+
+        wkup_m3_ipc@1324 {
+           compatible = "ti,am4372-wkup-m3-ipc";
+           reg = <0x1324 0x24>;
+           interrupts = <78>;
+           ti,rproc = <&wkup_m3>;
+           mboxes = <&am437x_mailbox &mbox_wkupm3>;
+           ti,set-io-isolation;
+           firmware-name = "am43x-evm-scale-data.bin";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt b/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt
deleted file mode 100644
index 401550487ed6..000000000000
--- a/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Wakeup M3 IPC Driver
-=====================
-
-The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor
-(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks
-that cannot be controlled from the MPU, like suspend/resume and certain deep
-C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver
-to boot the wkup_m3, it handles communication with the CM3 using IPC registers
-present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an
-API to allow the SoC PM code to execute specific PM tasks.
-
-Wkup M3 Device Node:
-====================
-A wkup_m3_ipc device node is used to represent the IPC registers within an
-SoC.
-
-Required properties:
---------------------
-- compatible:		Should be,
-				"ti,am3352-wkup-m3-ipc" for AM33xx SoCs
-				"ti,am4372-wkup-m3-ipc" for AM43xx SoCs
-- reg:			Contains the IPC register address space to communicate
-			with the Wakeup M3 processor
-- interrupts:		Contains the interrupt information for the wkup_m3
-			interrupt that signals the MPU.
-- ti,rproc:		phandle to the wkup_m3 rproc node so the IPC driver
-			can boot it.
-- mboxes:		phandles used by IPC framework to get correct mbox
-			channel for communication. Must point to appropriate
-			mbox_wkupm3 child node.
-
-Example:
---------
-/* AM33xx */
-	l4_wkup: l4_wkup@44c00000 {
-		...
-
-		scm: scm@210000 {
-			compatible = "ti,am3-scm", "simple-bus";
-			reg = <0x210000 0x2000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x210000 0x2000>;
-
-			...
-
-			wkup_m3_ipc: wkup_m3_ipc@1324 {
-				compatible = "ti,am3352-wkup-m3-ipc";
-				reg = <0x1324 0x24>;
-				interrupts = <78>;
-				ti,rproc = <&wkup_m3>;
-				mboxes = <&mailbox &mbox_wkupm3>;
-			};
-
-			...
-		};
-	};
diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml
new file mode 100644
index 000000000000..cb245f400287
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/xilinx/xlnx,vcu-settings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx VCU Settings
+
+maintainers:
+  - Michael Tretter <kernel@pengutronix.de>
+
+description: |
+  The Xilinx VCU Settings provides information about the configuration of the
+  video codec unit.
+
+properties:
+  compatible:
+    items:
+      - const: xlnx,vcu-settings
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    fpga {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        xlnx_vcu: vcu@a0041000 {
+            compatible = "xlnx,vcu-settings", "syscon";
+            reg = <0x0 0xa0041000 0x0 0x1000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt
index 6786d6715df0..2417b13ba468 100644
--- a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt
+++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt
@@ -12,10 +12,7 @@ Required properties:
 - compatible: shall be one of:
 	"xlnx,vcu"
 	"xlnx,vcu-logicoreip-1.0"
-- reg, reg-names: There are two sets of registers need to provide.
-	1. vcu slcr
-	2. Logicore
-	reg-names should contain name for the each register sequence.
+- reg : The base offset and size of the VCU_PL_SLCR register space.
 - clocks: phandle for aclk and pll_ref clocksource
 - clock-names: The identification string, "aclk", is always required for
    the axi clock. "pll_ref" is required for pll.
@@ -23,9 +20,7 @@ Example:
 
 	xlnx_vcu: vcu@a0040000 {
 		compatible = "xlnx,vcu-logicoreip-1.0";
-		reg = <0x0 0xa0040000 0x0 0x1000>,
-			 <0x0 0xa0041000 0x0 0x1000>;
-		reg-names = "vcu_slcr", "logicore";
+		reg = <0x0 0xa0040000 0x0 0x1000>;
 		clocks = <&si570_1>, <&clkc 71>;
 		clock-names = "pll_ref", "aclk";
 	};
diff --git a/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt b/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt
deleted file mode 100644
index 7629de1c2c72..000000000000
--- a/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* ZTE zx2967 family Power Domains
-
-zx2967 family includes support for multiple power domains which are used
-to gate power to one or more peripherals on the processor.
-
-Required Properties:
-  - compatible: should be one of the following.
-      * zte,zx296718-pcu - for zx296718 power domain.
-  - reg: physical base address of the controller and length of memory mapped
-      region.
-  - #power-domain-cells: Must be 1.
-
-Example:
-
-	pcu_domain: pcu@117000 {
-		compatible = "zte,zx296718-pcu";
-		reg = <0x00117000 0x1000>;
-		#power-domain-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
new file mode 100644
index 000000000000..59f7c60a14ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,adau1372.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+
+title: Analog Devices ADAU1372 CODEC
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.om>
+
+description: |
+  Analog Devices ADAU1372 four inputs and two outputs codec.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1372.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adau1372
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: "mclk"
+
+  powerdown-gpios:
+    description: GPIO used for hardware power-down.
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        audio-codec@3c {
+                compatible = "adi,adau1372";
+                reg = <0x3c>;
+                #sound-dai-cells = <0>;
+                clock-names = "mclk";
+                clocks = <&adau1372z_xtal>;
+        };
+    };
+
+    adau1372z_xtal: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <12288000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.txt b/Documentation/devicetree/bindings/sound/adi,adau1977.txt
deleted file mode 100644
index 9225472c80b4..000000000000
--- a/Documentation/devicetree/bindings/sound/adi,adau1977.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Analog Devices ADAU1977/ADAU1978/ADAU1979
-
-Datasheets:
-http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf
-http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf
-http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf
-
-This driver supports both the I2C and SPI bus.
-
-Required properties:
- - compatible: Should contain one of the following:
-               "adi,adau1977"
-               "adi,adau1978"
-               "adi,adau1979"
-
- - AVDD-supply: analog power supply for the device, please consult
-                Documentation/devicetree/bindings/regulator/regulator.txt
-
-Optional properties:
- - reset-gpios: the reset pin for the chip, for more details consult
-                Documentation/devicetree/bindings/gpio/gpio.txt
-
- - DVDD-supply: supply voltage for the digital core, please consult
-                Documentation/devicetree/bindings/regulator/regulator.txt
-
-- adi,micbias: configures the voltage setting for the MICBIAS pin.
-		Select 0/1/2/3/4/5/6/7/8 to specify MICBIAS voltage
-		5V/5.5V/6V/6.5V/7V/7.5V/8V/8.5V/9V
-		If not specified the default value will be "7" meaning 8.5 Volts.
-		This property is only valid for the ADAU1977
-
-For required properties on SPI, please consult
-Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Required properties on I2C:
-
- - reg:         The i2c address. Value depends on the state of ADDR0
-                and ADDR1, as wired in hardware.
-
-Examples:
-
-	adau1977_spi: adau1977@0 {
-		compatible = "adi,adau1977";
-		spi-max-frequency = <600000>;
-
-		AVDD-supply = <&regulator>;
-		DVDD-supply = <&regulator_digital>;
-
-		adi,micbias = <3>;
-		reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-	};
-
-	adau1977_i2c: adau1977@11 {
-		compatible = "adi,adau1977";
-		reg = <0x11>;
-
-		AVDD-supply = <&regulator>;
-		DVDD-supply = <&regulator_digital>;
-
-		reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
new file mode 100644
index 000000000000..847b83398d3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,adau1977.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADAU1977/ADAU1978/ADAU1979 Quad ADC with Diagnostics
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Bogdan Togorean <bogdan.togorean@analog.com>
+
+description: |
+  Analog Devices ADAU1977 and similar quad ADC with Diagnostics
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adau1977
+      - adi,adau1978
+      - adi,adau1979
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  reset-gpios:
+    maxItems: 1
+
+  AVDD-supply:
+    description: Analog power support for the device.
+
+  DVDD-supply:
+    description: Supply voltage for digital core.
+
+  adi,micbias:
+    description: |
+      Configures the voltage setting for the MICBIAS pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7, 8]
+    default: 7
+
+required:
+  - reg
+  - compatible
+  - AVDD-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adau1977_spi: adau1977@0 {
+            compatible = "adi,adau1977";
+            reg = <0>;
+            spi-max-frequency = <600000>;
+
+            AVDD-supply = <&regulator>;
+            DVDD-supply = <&regulator_digital>;
+
+            reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+
+            adi,micbias = <3>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adau1977_i2c: adau1977@11 {
+            compatible = "adi,adau1977";
+            reg = <0x11>;
+
+            AVDD-supply = <&regulator>;
+            DVDD-supply = <&regulator_digital>;
+
+            reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
index 75e0cbe6be70..fb78967ee17b 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
@@ -35,23 +35,21 @@ properties:
   adi,decimation-ratio:
     description: |
       This property set's the decimation ratio of PDM to PCM audio data.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [64, 32, 16]
-        default: 64
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [64, 32, 16]
+    default: 64
 
   adi,pdm-clk-map:
     description: |
       The ADAU7118 has two PDM clocks for the four Inputs. Each input must be
       assigned to one of these two clocks. This property set's the mapping
       between the clocks and the inputs.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 4
-        maxItems: 4
-        items:
-          maximum: 1
-        default: [0, 0, 1, 1]
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+    items:
+      maximum: 1
+    default: [0, 0, 1, 1]
 
 required:
   - "#sound-dai-cells"
@@ -59,6 +57,8 @@ required:
   - iovdd-supply
   - dvdd-supply
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml
new file mode 100644
index 000000000000..fd5aa61b467f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,max98396.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX98396 Speaker Amplifier
+
+maintainers:
+  - Ryan Lee <ryans.lee@analog.com>
+
+description:
+  The MAX98396 is a mono Class-DG speaker amplifier with I/V sense.
+  The device provides a PCM interface for audio data and a standard
+  I2C interface for control data communication.
+  The MAX98397 is a variant of MAX98396 with wide input supply range.
+
+properties:
+  compatible:
+    enum:
+      - adi,max98396
+      - adi,max98397
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  avdd-supply:
+    description: A 1.8V supply that powers up the AVDD pin.
+
+  dvdd-supply:
+    description: A 1.2V supply that powers up the DVDD pin.
+
+  dvddio-supply:
+    description: A 1.2V or 1.8V supply that powers up the VDDIO pin.
+
+  pvdd-supply:
+    description: A 3.0V to 20V supply that powers up the PVDD pin.
+
+  vbat-supply:
+    description: A 3.3V to 5.5V supply that powers up the VBAT pin.
+
+  adi,vmon-slot-no:
+    description: slot number of the voltage sense monitor
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 15
+    default: 0
+
+  adi,imon-slot-no:
+    description: slot number of the current sense monitor
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 15
+    default: 1
+
+  adi,spkfb-slot-no:
+    description: slot number of speaker DSP monitor
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 15
+    default: 2
+
+  adi,bypass-slot-no:
+    description:
+      Selects the PCM data input channel that is routed to the speaker
+      audio processing bypass path.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 15
+    default: 0
+
+  adi,interleave-mode:
+    description:
+      For cases where a single combined channel for the I/V sense data
+      is not sufficient, the device can also be configured to share
+      a single data output channel on alternating frames.
+      In this configuration, the current and voltage data will be frame
+      interleaved on a single output channel.
+    type: boolean
+
+  adi,dmon-stuck-enable:
+    description:
+      Enables the "data monitor stuck" feature. Once the data monitor is
+      enabled, it actively monitors the selected input data (from DIN) to the
+      speaker amplifier. Once a data error is detected, the data monitor
+      automatically places the device into software shutdown.
+    type: boolean
+
+  adi,dmon-stuck-threshold-bits:
+    description:
+      Sets the threshold for the "data monitor stuck" feature, in bits.
+    enum: [9, 11, 13, 15]
+    default: 15
+
+  adi,dmon-magnitude-enable:
+    description:
+      Enables the "data monitor magnitude" feature. Once the data monitor is
+      enabled, it actively monitors the selected input data (from DIN) to the
+      speaker amplifier. Once a data error is detected, the data monitor
+      automatically places the device into software shutdown.
+    type: boolean
+
+  adi,dmon-magnitude-threshold-bits:
+    description:
+      Sets the threshold for the "data monitor magnitude" feature, in bits.
+    enum: [2, 3, 4, 5]
+    default: 5
+
+  adi,dmon-duration-ms:
+    description:
+      Sets the duration for the "data monitor" feature, in milliseconds.
+    enum: [64, 256, 1024, 4096]
+    default: 64
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        max98396: amplifier@39 {
+            compatible = "adi,max98396";
+            reg = <0x39>;
+            dvdd-supply = <&regulator_1v2>;
+            dvddio-supply = <&regulator_1v8>;
+            avdd-supply = <&regulator_1v8>;
+            pvdd-supply = <&regulator_pvdd>;
+            adi,vmon-slot-no = <0>;
+            adi,imon-slot-no = <1>;
+            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ak4375.yaml b/Documentation/devicetree/bindings/sound/ak4375.yaml
new file mode 100644
index 000000000000..5f0fc584bb38
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4375.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ak4375.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AK4375 DAC and headphones amplifier
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+properties:
+  compatible:
+    const: asahi-kasei,ak4375
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  avdd-supply:
+    description: regulator phandle for the AVDD power supply.
+
+  tvdd-supply:
+    description: regulator phandle for the TVDD power supply.
+
+  pdn-gpios:
+    description: optional GPIO to set the PDN pin.
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+  - avdd-supply
+  - tvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      headphones: audio-codec@10 {
+        compatible = "asahi-kasei,ak4375";
+        reg = <0x10>;
+        avdd-supply = <&reg_headphones_avdd>;
+        tvdd-supply = <&pm8916_l6>;
+        pdn-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&headphones_pdn_default>;
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ak4458.txt b/Documentation/devicetree/bindings/sound/ak4458.txt
index e5820235e0d5..0416c14895d6 100644
--- a/Documentation/devicetree/bindings/sound/ak4458.txt
+++ b/Documentation/devicetree/bindings/sound/ak4458.txt
@@ -10,6 +10,11 @@ Required properties:
 Optional properties:
 - reset-gpios: A GPIO specifier for the power down & reset pin
 - mute-gpios: A GPIO specifier for the soft mute pin
+- AVDD-supply: Analog power supply
+- DVDD-supply: Digital power supply
+- dsd-path: Select DSD input pins for ak4497
+            0: select #16, #17, #19 pins
+            1: select #3, #4, #5 pins
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/sound/ak4613.txt b/Documentation/devicetree/bindings/sound/ak4613.txt
deleted file mode 100644
index 49a2e74fd9cb..000000000000
--- a/Documentation/devicetree/bindings/sound/ak4613.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-AK4613 I2C transmitter
-
-This device supports I2C mode only.
-
-Required properties:
-
-- compatible : "asahi-kasei,ak4613"
-- reg : The chip select number on the I2C bus
-
-Optional properties:
-- asahi-kasei,in1-single-end	: Boolean. Indicate input / output pins are single-ended.
-- asahi-kasei,in2-single-end	  rather than differential.
-- asahi-kasei,out1-single-end
-- asahi-kasei,out2-single-end
-- asahi-kasei,out3-single-end
-- asahi-kasei,out4-single-end
-- asahi-kasei,out5-single-end
-- asahi-kasei,out6-single-end
-
-Example:
-
-&i2c {
-	ak4613: ak4613@10 {
-		compatible = "asahi-kasei,ak4613";
-		reg = <0x10>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/ak4613.yaml b/Documentation/devicetree/bindings/sound/ak4613.yaml
new file mode 100644
index 000000000000..aa8a258a9f1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4613.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ak4613.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AK4613 I2C transmitter
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+  compatible:
+    const: asahi-kasei,ak4613
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+patternProperties:
+  "^asahi-kasei,in[1-2]-single-end$":
+    description: Input Pin 1 - 2.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  "^asahi-kasei,out[1-6]-single-end$":
+    description: Output Pin 1 - 6.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ak4613: codec@10 {
+            compatible = "asahi-kasei,ak4613";
+            reg = <0x10>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ak4642.txt b/Documentation/devicetree/bindings/sound/ak4642.txt
deleted file mode 100644
index 58e48ee97175..000000000000
--- a/Documentation/devicetree/bindings/sound/ak4642.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-AK4642 I2C transmitter
-
-This device supports I2C mode only.
-
-Required properties:
-
-  - compatible : "asahi-kasei,ak4642" or "asahi-kasei,ak4643" or "asahi-kasei,ak4648"
-  - reg : The chip select number on the I2C bus
-
-Optional properties:
-
-  - #clock-cells :		common clock binding; shall be set to 0
-  - clocks :			common clock binding; MCKI clock
-  - clock-frequency :		common clock binding; frequency of MCKO
-  - clock-output-names :	common clock binding; MCKO clock name
-
-Example 1:
-
-&i2c {
-	ak4648: ak4648@12 {
-		compatible = "asahi-kasei,ak4642";
-		reg = <0x12>;
-	};
-};
-
-Example 2:
-
-&i2c {
-	ak4643: codec@12 {
-		compatible = "asahi-kasei,ak4643";
-		reg = <0x12>;
-		#clock-cells = <0>;
-		clocks = <&audio_clock>;
-		clock-frequency = <12288000>;
-		clock-output-names = "ak4643_mcko";
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/ak4642.yaml b/Documentation/devicetree/bindings/sound/ak4642.yaml
new file mode 100644
index 000000000000..48a5b2c3934e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4642.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ak4642.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AK4642 I2C transmitter
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - asahi-kasei,ak4642
+      - asahi-kasei,ak4643
+      - asahi-kasei,ak4648
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: common clock binding; frequency of MCKO
+
+  clock-output-names:
+    description: common clock name
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ak4643: codec@12 {
+            compatible = "asahi-kasei,ak4643";
+            #sound-dai-cells = <0>;
+            reg = <0x12>;
+            #clock-cells = <0>;
+            clocks = <&audio_clock>;
+            clock-frequency = <12288000>;
+            clock-output-names = "ak4643_mcko";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt
index 7d67ca6ced80..e28708db6686 100644
--- a/Documentation/devicetree/bindings/sound/ak5558.txt
+++ b/Documentation/devicetree/bindings/sound/ak5558.txt
@@ -4,12 +4,14 @@ This device supports I2C mode only.
 
 Required properties:
 
-- compatible : "asahi-kasei,ak5558"
+- compatible : "asahi-kasei,ak5558" or "asahi-kasei,ak5552".
 - reg : The I2C address of the device.
 
 Optional properties:
 
 - reset-gpios: A GPIO specifier for the power down & reset pin.
+- AVDD-supply: Analog power supply
+- DVDD-supply: Digital power supply
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
index ea1d2efb2aaa..292fcb643999 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-codec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Codec Device Tree Bindings
+title: Allwinner A10 Codec
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -57,38 +57,38 @@ properties:
       A list of the connections between audio components.  Each entry
       is a pair of strings, the first being the connection's sink, the
       second being the connection's source.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/non-unique-string-array
-      - minItems: 2
-        maxItems: 18
-        items:
-          enum:
-            # Audio Pins on the SoC
-            - HP
-            - HPCOM
-            - LINEIN
-            - LINEOUT
-            - MIC1
-            - MIC2
-            - MIC3
-
-            # Microphone Biases from the SoC
-            - HBIAS
-            - MBIAS
-
-            # Board Connectors
-            - Headphone
-            - Headset Mic
-            - Line In
-            - Line Out
-            - Mic
-            - Speaker
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    minItems: 2
+    maxItems: 18
+    items:
+      enum:
+        # Audio Pins on the SoC
+        - HP
+        - HPCOM
+        - LINEIN
+        - LINEOUT
+        - MIC1
+        - MIC2
+        - MIC3
+
+        # Microphone Biases from the SoC
+        - HBIAS
+        - MBIAS
+
+        # Board Connectors
+        - Headphone
+        - Headset Mic
+        - Line In
+        - Line Out
+        - Mic
+        - Speaker
 
   allwinner,codec-analog-controls:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: Phandle to the codec analog controls in the PRCM
 
   allwinner,pa-gpios:
+    maxItems: 1
     description: GPIO to enable the external amplifier
 
 required:
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
index 112ae00d63c1..dd30881ad2f5 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-i2s.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 I2S Controller Device Tree Bindings
+title: Allwinner A10 I2S Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -20,10 +20,21 @@ properties:
       - const: allwinner,sun6i-a31-i2s
       - const: allwinner,sun8i-a83t-i2s
       - const: allwinner,sun8i-h3-i2s
+      - items:
+          - const: allwinner,sun8i-r40-i2s
+          - const: allwinner,sun8i-h3-i2s
+      - items:
+          - const: allwinner,sun8i-v3-i2s
+          - const: allwinner,sun8i-h3-i2s
       - const: allwinner,sun50i-a64-codec-i2s
       - items:
           - const: allwinner,sun50i-a64-i2s
           - const: allwinner,sun8i-h3-i2s
+      - const: allwinner,sun50i-h6-i2s
+      - const: allwinner,sun50i-r329-i2s
+      - items:
+          - const: allwinner,sun20i-d1-i2s
+          - const: allwinner,sun50i-r329-i2s
 
   reg:
     maxItems: 1
@@ -59,6 +70,8 @@ allOf:
               - allwinner,sun8i-a83t-i2s
               - allwinner,sun8i-h3-i2s
               - allwinner,sun50i-a64-codec-i2s
+              - allwinner,sun50i-h6-i2s
+              - allwinner,sun50i-r329-i2s
 
     then:
       required:
@@ -68,13 +81,14 @@ allOf:
       properties:
         compatible:
           contains:
-            const: allwinner,sun8i-a83t-i2s
+            enum:
+              - allwinner,sun8i-a83t-i2s
+              - allwinner,sun8i-h3-i2s
 
     then:
       properties:
         dmas:
           minItems: 1
-          maxItems: 2
           items:
             - description: RX DMA Channel
             - description: TX DMA Channel
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
index 444a432912bb..68c84e29ce57 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-spdif.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 S/PDIF Controller Device Tree Bindings
+title: Allwinner A10 S/PDIF Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
index 3b764415c9ab..5800de63fc84 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/allwinner,sun50i-a64-codec-analog.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A64 Analog Codec Device Tree Bindings
+title: Allwinner A64 Analog Codec
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -21,6 +21,11 @@ properties:
     description:
       Regulator for the headphone amplifier
 
+  allwinner,internal-bias-resistor:
+    description:
+      Enable the internal 2.2K bias resistor between HBIAS and MICDET pins
+    type: boolean
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
new file mode 100644
index 000000000000..2f12cabe4c71
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/allwinner,sun50i-h6-dmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 DMIC
+
+maintainers:
+  - Ban Tao <fengzheng923@gmail.com>
+
+properties:
+  compatible:
+    const: allwinner,sun50i-h6-dmic
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  dmas:
+    items:
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    dmic: dmic@5095000 {
+      #sound-dai-cells = <0>;
+      compatible = "allwinner,sun50i-h6-dmic";
+      reg = <0x05095000 0x400>;
+      interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&ccu CLK_BUS_DMIC>, <&ccu CLK_DMIC>;
+      clock-names = "bus", "mod";
+      dmas = <&dma 7>;
+      dma-names = "rx";
+      resets = <&ccu RST_BUS_DMIC>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
index 9718358826ab..1c21a1b390c7 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/allwinner,sun8i-a23-codec-analog.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A23 Analog Codec Device Tree Bindings
+title: Allwinner A23 Analog Codec
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -12,12 +12,15 @@ maintainers:
 
 properties:
   compatible:
-    enum:
+    oneOf:
       # FIXME: This is documented in the PRCM binding, but needs to be
       # migrated here at some point
       # - allwinner,sun8i-a23-codec-analog
-      - allwinner,sun8i-h3-codec-analog
-      - allwinner,sun8i-v3s-codec-analog
+      - const: allwinner,sun8i-h3-codec-analog
+      - items:
+          - const: allwinner,sun8i-v3-codec-analog
+          - const: allwinner,sun8i-h3-codec-analog
+      - const: allwinner,sun8i-v3s-codec-analog
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml
index 55d28268d2f4..4eb11a8e622b 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/allwinner,sun8i-a33-codec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A33 Codec Device Tree Bindings
+title: Allwinner A33 Codec
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -12,10 +12,18 @@ maintainers:
 
 properties:
   "#sound-dai-cells":
-    const: 0
+    minimum: 0
+    maximum: 1
+    description:
+      A value of 0 is deprecated. When used, it only allows access to
+      the ADC/DAC and AIF1 (the CPU DAI), not the other two AIFs/DAIs.
 
   compatible:
-    const: allwinner,sun8i-a33-codec
+    oneOf:
+      - items:
+          - const: allwinner,sun50i-a64-codec
+          - const: allwinner,sun8i-a33-codec
+      - const: allwinner,sun8i-a33-codec
 
   reg:
     maxItems: 1
@@ -46,7 +54,7 @@ additionalProperties: false
 examples:
   - |
     audio-codec@1c22e00 {
-      #sound-dai-cells = <0>;
+      #sound-dai-cells = <1>;
       compatible = "allwinner,sun8i-a33-codec";
       reg = <0x01c22e00 0x400>;
       interrupts = <0 29 4>;
diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
new file mode 100644
index 000000000000..0705f91199a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,aiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AIU audio output controller
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 2
+
+  compatible:
+    items:
+      - enum:
+          - amlogic,aiu-gxbb
+          - amlogic,aiu-gxl
+          - amlogic,aiu-meson8
+          - amlogic,aiu-meson8b
+      - const: amlogic,aiu
+
+  clocks:
+    items:
+      - description: AIU peripheral clock
+      - description: I2S peripheral clock
+      - description: I2S output clock
+      - description: I2S master clock
+      - description: I2S mixer clock
+      - description: SPDIF peripheral clock
+      - description: SPDIF output clock
+      - description: SPDIF master clock
+      - description: SPDIF master clock multiplexer
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: i2s_pclk
+      - const: i2s_aoclk
+      - const: i2s_mclk
+      - const: i2s_mixer
+      - const: spdif_pclk
+      - const: spdif_aoclk
+      - const: spdif_mclk
+      - const: spdif_mclk_sel
+
+  interrupts:
+    items:
+      - description: I2S interrupt line
+      - description: SPDIF interrupt line
+
+  interrupt-names:
+    items:
+      - const: i2s
+      - const: spdif
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  sound-name-prefix: true
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/gxbb-clkc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+
+    aiu: audio-controller@5400 {
+        compatible = "amlogic,aiu-gxl", "amlogic,aiu";
+        #sound-dai-cells = <2>;
+        reg = <0x5400 0x2ac>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "i2s", "spdif";
+        clocks = <&clkc CLKID_AIU_GLUE>,
+                 <&clkc CLKID_I2S_OUT>,
+                 <&clkc CLKID_AOCLK_GATE>,
+                 <&clkc CLKID_CTS_AMCLK>,
+                 <&clkc CLKID_MIXER_IFACE>,
+                 <&clkc CLKID_IEC958>,
+                 <&clkc CLKID_IEC958_GATE>,
+                 <&clkc CLKID_CTS_MCLK_I958>,
+                 <&clkc CLKID_CTS_I958>;
+        clock-names = "pclk",
+                      "i2s_pclk",
+                      "i2s_aoclk",
+                      "i2s_mclk",
+                      "i2s_mixer",
+                      "spdif_pclk",
+                      "spdif_aoclk",
+                      "spdif_mclk",
+                      "spdif_mclk_sel";
+        resets = <&reset RESET_AIU>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
new file mode 100644
index 000000000000..77469a45bb7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,g12a-toacodec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic G12a Internal DAC Control Glue
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - items:
+          - const: amlogic,g12a-toacodec
+      - items:
+          - enum:
+              - amlogic,sm1-toacodec
+          - const: amlogic,g12a-toacodec
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  sound-name-prefix: true
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+    toacodec: audio-controller@740 {
+        compatible = "amlogic,g12a-toacodec";
+        reg = <0x740 0x4>;
+        #sound-dai-cells = <1>;
+        resets = <&clkc_audio AUD_RESET_TOACODEC>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
new file mode 100644
index 000000000000..5b8d59245f82
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic GX sound card
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  compatible:
+    items:
+      - const: amlogic,gx-sound-card
+
+  audio-aux-devs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: list of auxiliary devices
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    minItems: 2
+    description: |-
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+
+  audio-widgets:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    minItems: 2
+    description: |-
+      A list off component DAPM widget. Each entry is a pair of strings,
+      the first being the widget type, the second being the widget name
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+patternProperties:
+  "^dai-link-[0-9]+$":
+    type: object
+    additionalProperties: false
+    description: |-
+      dai-link child nodes:
+        Container for dai-link level properties and the CODEC sub-nodes.
+        There should be at least one (and probably more) subnode of this type
+
+    properties:
+      dai-format:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [ i2s, left-j, dsp_a ]
+
+      mclk-fs:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |-
+          Multiplication factor between the frame rate and master clock
+          rate
+
+      sound-dai:
+        maxItems: 1
+        description: phandle of the CPU DAI
+
+    patternProperties:
+      "^codec-[0-9]+$":
+        type: object
+        additionalProperties: false
+        description: |-
+          Codecs:
+          dai-link representing backend links should have at least one subnode.
+          One subnode for each codec of the dai-link. dai-link representing
+          frontend links have no codec, therefore have no subnodes
+
+        properties:
+          sound-dai:
+            maxItems: 1
+            description: phandle of the codec DAI
+
+        required:
+          - sound-dai
+
+    required:
+      - sound-dai
+
+required:
+  - model
+  - dai-link-0
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "amlogic,gx-sound-card";
+        model = "GXL-ACME-S905X-FOO";
+        audio-aux-devs = <&amp>;
+        audio-routing = "I2S ENCODER I2S IN", "I2S FIFO Playback";
+
+        dai-link-0 {
+               sound-dai = <&i2s_fifo>;
+        };
+
+        dai-link-1 {
+                sound-dai = <&i2s_encoder>;
+                dai-format = "i2s";
+                mclk-fs = <256>;
+
+                codec-0 {
+                        sound-dai = <&codec0>;
+                };
+
+                codec-1 {
+                        sound-dai = <&codec1>;
+                };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
new file mode 100644
index 000000000000..580a3d040abc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,t9015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic T9015 Internal Audio DAC
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    items:
+      - const: amlogic,t9015
+
+  clocks:
+    items:
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: pclk
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  AVDD-supply:
+    description:
+      Analogue power supply.
+
+  sound-name-prefix: true
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - AVDD-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/g12a-clkc.h>
+    #include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
+
+    acodec: audio-controller@32000 {
+        compatible = "amlogic,t9015";
+        reg = <0x32000 0x14>;
+        #sound-dai-cells = <0>;
+        clocks = <&clkc CLKID_AUDIO_CODEC>;
+        clock-names = "pclk";
+        resets = <&reset RESET_AUDIO_CODEC>;
+        AVDD-supply = <&vddao_1v8>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/apple,mca.yaml b/Documentation/devicetree/bindings/sound/apple,mca.yaml
new file mode 100644
index 000000000000..d5dc92b5b654
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/apple,mca.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/apple,mca.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple MCA I2S transceiver
+
+description: |
+  MCA is an I2S transceiver peripheral found on M1 and other Apple chips. It is
+  composed of a number of identical clusters which can operate independently
+  or in an interlinked fashion. Up to 6 clusters have been seen on an MCA.
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t6000-mca
+          - apple,t8103-mca
+      - const: apple,mca
+
+  reg:
+    items:
+      - description: Register region of the MCA clusters proper
+      - description: Register region of the DMA glue and its FIFOs
+
+  interrupts:
+    minItems: 4
+    maxItems: 6
+    description:
+      One interrupt per each cluster
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  dmas:
+    minItems: 16
+    maxItems: 24
+    description:
+      DMA channels corresponding to the SERDES units in the peripheral. They are
+      listed in groups of four per cluster, and within the group they are given
+      as associated to the TXA, RXA, TXB, RXB units.
+
+  dma-names:
+    minItems: 16
+    items:
+      - const: tx0a
+      - const: rx0a
+      - const: tx0b
+      - const: rx0b
+      - const: tx1a
+      - const: rx1a
+      - const: tx1b
+      - const: rx1b
+      - const: tx2a
+      - const: rx2a
+      - const: tx2b
+      - const: rx2b
+      - const: tx3a
+      - const: rx3a
+      - const: tx3b
+      - const: rx3b
+      - const: tx4a
+      - const: rx4a
+      - const: tx4b
+      - const: rx4b
+      - const: tx5a
+      - const: rx5a
+      - const: tx5b
+      - const: rx5b
+    description: |
+      Names for the DMA channels: 'tx'/'rx', then cluster number, then 'a'/'b'
+      based on the associated SERDES unit.
+
+  clocks:
+    minItems: 4
+    maxItems: 6
+    description:
+      Clusters' input reference clock.
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    minItems: 5
+    maxItems: 7
+    description:
+      First a general power domain for register access, then the power
+      domains of individual clusters for their operation.
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+  - clocks
+  - power-domains
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    mca: i2s@9b600000 {
+      compatible = "apple,t6000-mca", "apple,mca";
+      reg = <0x9b600000 0x10000>,
+            <0x9b200000 0x20000>;
+
+      clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
+      power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+                      <&ps_mca2>, <&ps_mca3>;
+      dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+             <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+             <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+             <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
+      dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+                  "tx1a", "rx1a", "tx1b", "rx1b",
+                  "tx2a", "rx2a", "tx2b", "rx2b",
+                  "tx3a", "rx3a", "tx3b", "rx3b";
+
+      #sound-dai-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/arm,pl041.yaml b/Documentation/devicetree/bindings/sound/arm,pl041.yaml
new file mode 100644
index 000000000000..7896b8150cf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/arm,pl041.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/arm,pl041.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Ltd. PrimeCell PL041 AACI sound interface
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm PrimeCell Advanced Audio CODEC Interface (AACI) is an AMBA compliant
+  peripheral that provides communication with an audio CODEC using the AC-link
+  protocol.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl041
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl041
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: APB register access clock
+
+  clock-names:
+    const: apb_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    audio-controller@40000 {
+        compatible = "arm,pl041", "arm,primecell";
+        reg = <0x040000 0x1000>;
+        interrupts = <11>;
+        clocks = <&v2m_clk24mhz>;
+        clock-names = "apb_pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/arndale.txt b/Documentation/devicetree/bindings/sound/arndale.txt
deleted file mode 100644
index 17530120ccfc..000000000000
--- a/Documentation/devicetree/bindings/sound/arndale.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Audio Binding for Arndale boards
-
-Required properties:
-- compatible : Can be one of the following:
-		"samsung,arndale-rt5631",
-		"samsung,arndale-wm1811"
-
-- samsung,audio-cpu: The phandle of the Samsung I2S controller
-- samsung,audio-codec: The phandle of the audio codec
-
-Optional:
-- samsung,model: The name of the sound-card
-
-Arndale Boards has many audio daughter cards, one of them is
-rt5631/alc5631. Below example shows audio bindings for rt5631/
-alc5631 based codec.
-
-Example:
-
-sound {
-		compatible = "samsung,arndale-rt5631";
-
-		samsung,audio-cpu = <&i2s0>
-		samsung,audio-codec = <&rt5631>;
-};
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
new file mode 100644
index 000000000000..43d04702ac2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-classd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel ClassD Amplifier
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  The Audio Class D Amplifier (CLASSD) is a digital input, Pulse Width
+  Modulated (PWM) output stereo Class D amplifier.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-classd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: tx
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    default: CLASSD
+    description: The user-visible name of this sound complex.
+
+  atmel,pwm-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - single
+      - diff
+    default: single
+    description: PWM modulation type.
+
+  atmel,non-overlap-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 5
+      - 10
+      - 15
+      - 20
+    default: 10
+    description:
+      Set non-overlapping time, the unit is nanosecond(ns).
+      Non-overlapping will be disabled if not specified.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    classd: sound@fc048000 {
+        compatible = "atmel,sama5d2-classd";
+        reg = <0xfc048000 0x100>;
+        interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+            | AT91_XDMAC_DT_PERID(47))>;
+        dma-names = "tx";
+        clocks = <&classd_clk>, <&classd_gclk>;
+        clock-names = "pclk", "gclk";
+        assigned-clocks = <&classd_gclk>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_classd_default>;
+        atmel,model = "classd @ SAMA5D2-Xplained";
+        atmel,pwm-type = "diff";
+        atmel,non-overlap-time = <10>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml
new file mode 100644
index 000000000000..0cd1ff89baed
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel I2S controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  Atmel I2S (Inter-IC Sound Controller) bus is the standard
+  interface for connecting audio devices, such as audio codecs.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral clock
+      - description: Generated clock (Optional)
+      - description: I2S mux clock (Optional). Set
+          with gclk when Master Mode is required.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+      - const: muxclk
+    minItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2s@f8050000 {
+        compatible = "atmel,sama5d2-i2s";
+        reg = <0xf8050000 0x300>;
+        interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                AT91_XDMAC_DT_PERID(31))>,
+               <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                AT91_XDMAC_DT_PERID(32))>;
+        dma-names = "tx", "rx";
+        clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
+        clock-names = "pclk", "gclk", "muxclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2s0_default>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
new file mode 100644
index 000000000000..f320b561f24c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-pdmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel PDMIC decoder
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  Atmel Pulse Density Modulation Interface Controller
+  (PDMIC) peripheral is a mono PDM decoder module
+  that decodes an incoming PDM sample stream.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-pdmic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: peripheral clock
+      - description: generated clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  atmel,mic-min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The minimal frequency that the microphone supports.
+
+  atmel,mic-max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The maximal frequency that the microphone supports.
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    default: PDMIC
+    description: The user-visible name of this sound card.
+
+  atmel,mic-offset:
+    $ref: /schemas/types.yaml#/definitions/int32
+    default: 0
+    description: The offset that should be added.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clock-names
+  - clocks
+  - atmel,mic-min-freq
+  - atmel,mic-max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pdmic: sound@f8018000 {
+        compatible = "atmel,sama5d2-pdmic";
+        reg = <0xf8018000 0x124>;
+        interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+                | AT91_XDMAC_DT_PERID(50))>;
+        dma-names = "rx";
+        clocks = <&pdmic_clk>, <&pdmic_gclk>;
+        clock-names = "pclk", "gclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_pdmic_default>;
+        atmel,model = "PDMIC@sama5d2_xplained";
+        atmel,mic-min-freq = <1000000>;
+        atmel,mic-max-freq = <3246000>;
+        atmel,mic-offset = <0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel-classd.txt b/Documentation/devicetree/bindings/sound/atmel-classd.txt
deleted file mode 100644
index 898551076382..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-classd.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Atmel ClassD driver under ALSA SoC architecture
-
-Required properties:
-- compatible
-	Should be "atmel,sama5d2-classd".
-- reg
-	Should contain ClassD registers location and length.
-- interrupts
-	Should contain the IRQ line for the ClassD.
-- dmas
-	One DMA specifiers as described in atmel-dma.txt and dma.txt files.
-- dma-names
-	Must be "tx".
-- clock-names
-	Tuple listing input clock names.
-	Required elements: "pclk" and "gclk".
-- clocks
-	Please refer to clock-bindings.txt.
-- assigned-clocks
-	Should be <&classd_gclk>.
-
-Optional properties:
-- pinctrl-names, pinctrl-0
-	Please refer to pinctrl-bindings.txt.
-- atmel,model
-	The user-visible name of this sound complex.
-	The default value is "CLASSD".
-- atmel,pwm-type
-	PWM modulation type, "single" or "diff".
-	The default value is "single".
-- atmel,non-overlap-time
-	Set non-overlapping time, the unit is nanosecond(ns).
-	There are four values,
-	<5>, <10>, <15>, <20>, the default value is <10>.
-	Non-overlapping will be disabled if not specified.
-
-Example:
-classd: classd@fc048000 {
-		compatible = "atmel,sama5d2-classd";
-		reg = <0xfc048000 0x100>;
-		interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-			| AT91_XDMAC_DT_PERID(47))>;
-		dma-names = "tx";
-		clocks = <&classd_clk>, <&classd_gclk>;
-		clock-names = "pclk", "gclk";
-		assigned-clocks = <&classd_gclk>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_classd_default>;
-		atmel,model = "classd @ SAMA5D2-Xplained";
-		atmel,pwm-type = "diff";
-		atmel,non-overlap-time = <10>;
-};
diff --git a/Documentation/devicetree/bindings/sound/atmel-i2s.txt b/Documentation/devicetree/bindings/sound/atmel-i2s.txt
deleted file mode 100644
index 40549f496a81..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-i2s.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Atmel I2S controller
-
-Required properties:
-- compatible:     Should be "atmel,sama5d2-i2s".
-- reg:            Should be the physical base address of the controller and the
-                  length of memory mapped region.
-- interrupts:     Should contain the interrupt for the controller.
-- dmas:           Should be one per channel name listed in the dma-names property,
-                  as described in atmel-dma.txt and dma.txt files.
-- dma-names:      Two dmas have to be defined, "tx" and "rx".
-                  This IP also supports one shared channel for both rx and tx;
-                  if this mode is used, one "rx-tx" name must be used.
-- clocks:         Must contain an entry for each entry in clock-names.
-                  Please refer to clock-bindings.txt.
-- clock-names:    Should be one of each entry matching the clocks phandles list:
-                  - "pclk" (peripheral clock) Required.
-                  - "gclk" (generated clock) Optional (1).
-                  - "muxclk" (I2S mux clock) Optional (1).
-
-Optional properties:
-- pinctrl-0:      Should specify pin control groups used for this controller.
-- princtrl-names: Should contain only one value - "default".
-
-
-(1) : Only the peripheral clock is required. The generated clock and the I2S
-      mux clock are optional and should only be set together, when Master Mode
-      is required.
-
-Example:
-
-	i2s@f8050000 {
-		compatible = "atmel,sama5d2-i2s";
-		reg = <0xf8050000 0x300>;
-		interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(31))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(32))>;
-		dma-names = "tx", "rx";
-		clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
-		clock-names = "pclk", "gclk", "muxclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2s0_default>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/atmel-pdmic.txt b/Documentation/devicetree/bindings/sound/atmel-pdmic.txt
deleted file mode 100644
index e0875f17c229..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-pdmic.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Atmel PDMIC driver under ALSA SoC architecture
-
-Required properties:
-- compatible
-	Should be "atmel,sama5d2-pdmic".
-- reg
-	Should contain PDMIC registers location and length.
-- interrupts
-	Should contain the IRQ line for the PDMIC.
-- dmas
-	One DMA specifiers as described in atmel-dma.txt and dma.txt files.
-- dma-names
-	Must be "rx".
-- clock-names
-	Required elements:
-	- "pclk"	peripheral clock
-	- "gclk"	generated clock
-- clocks
-	Must contain an entry for each required entry in clock-names.
-	Please refer to clock-bindings.txt.
-- atmel,mic-min-freq
-	The minimal frequency that the micphone supports.
-- atmel,mic-max-freq
-	The maximal frequency that the micphone supports.
-
-Optional properties:
-- pinctrl-names, pinctrl-0
-	Please refer to pinctrl-bindings.txt.
-- atmel,model
-	The user-visible name of this sound card.
-	The default value is "PDMIC".
-- atmel,mic-offset
-	The offset that should be added.
-	The range is from -32768 to 32767.
-	The default value is 0.
-
-Example:
-	pdmic@f8018000 {
-				compatible = "atmel,sama5d2-pdmic";
-				reg = <0xf8018000 0x124>;
-				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
-				dmas = <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-					| AT91_XDMAC_DT_PERID(50))>;
-				dma-names = "rx";
-				clocks = <&pdmic_clk>, <&pdmic_gclk>;
-				clock-names = "pclk", "gclk";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pdmic_default>;
-				atmel,model = "PDMIC @ sama5d2_xplained";
-				atmel,mic-min-freq = <1000000>;
-				atmel,mic-max-freq = <3246000>;
-				atmel,mic-offset = <0x0>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
index 0720857089a7..8facbce53db8 100644
--- a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
+++ b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
@@ -16,7 +16,7 @@ Board connectors:
  * Line In Jack
 
 wm8731 pins:
-cf Documentation/devicetree/bindings/sound/wm8731.txt
+cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
 
 Example:
 sound {
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
deleted file mode 100644
index 269682619a70..000000000000
--- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+++ /dev/null
@@ -1,337 +0,0 @@
-Audio Graph Card:
-
-Audio Graph Card specifies audio DAI connections of SoC <-> codec.
-It is based on common bindings for device graphs.
-see ${LINUX}/Documentation/devicetree/bindings/graph.txt
-
-Basically, Audio Graph Card property is same as Simple Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
-
-Below are same as Simple-Card.
-
-- label
-- widgets
-- routing
-- dai-format
-- frame-master
-- bitclock-master
-- bitclock-inversion
-- frame-inversion
-- mclk-fs
-- hp-det-gpio
-- mic-det-gpio
-- dai-tdm-slot-num
-- dai-tdm-slot-width
-- clocks / system-clock-frequency
-
-Required properties:
-
-- compatible				: "audio-graph-card";
-- dais					: list of CPU DAI port{s}
-
-Optional properties:
-- pa-gpios: GPIO used to control external amplifier.
-
------------------------
-Example: Single DAI case
------------------------
-
-	sound_card {
-		compatible = "audio-graph-card";
-
-		dais = <&cpu_port>;
-	};
-
-	dai-controller {
-		...
-		cpu_port: port {
-			cpu_endpoint: endpoint {
-				remote-endpoint = <&codec_endpoint>;
-
-				dai-format = "left_j";
-				...
-			};
-		};
-	};
-
-	audio-codec {
-		...
-		port {
-			codec_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint>;
-			};
-		};
-	};
-
------------------------
-Example: Multi DAI case
------------------------
-
-	sound-card {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-
-		dais = <&cpu_port0
-			&cpu_port1
-			&cpu_port2>;
-	};
-
-	audio-codec@0 {
-		...
-		port {
-			codec0_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint0>;
-			};
-		};
-	};
-
-	audio-codec@1 {
-		...
-		port {
-			codec1_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint1>;
-			};
-		};
-	};
-
-	audio-codec@2 {
-		...
-		port {
-			codec2_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint2>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		ports {
-			cpu_port0: port@0 {
-				cpu_endpoint0: endpoint {
-					remote-endpoint = <&codec0_endpoint>;
-
-					dai-format = "left_j";
-					...
-				};
-			};
-			cpu_port1: port@1 {
-				cpu_endpoint1: endpoint {
-					remote-endpoint = <&codec1_endpoint>;
-
-					dai-format = "i2s";
-					...
-				};
-			};
-			cpu_port2: port@2 {
-				cpu_endpoint2: endpoint {
-					remote-endpoint = <&codec2_endpoint>;
-
-					dai-format = "i2s";
-					...
-				};
-			};
-		};
-	};
-
-
------------------------
-Example: Sampling Rate Conversion
------------------------
-
-	sound_card {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-		prefix = "codec";
-		routing = "codec Playback", "DAI0 Playback",
-			  "DAI0 Capture",   "codec Capture";
-		convert-rate = <48000>;
-
-		dais = <&cpu_port>;
-	};
-
-	audio-codec {
-		...
-		port {
-			codec_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		cpu_port: port {
-			cpu_endpoint: endpoint {
-				remote-endpoint = <&codec_endpoint>;
-
-				dai-format = "left_j";
-				...
-			};
-		};
-	};
-
------------------------
-Example: 2 CPU 1 Codec (Mixing)
------------------------
-
-	sound_card {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-		routing = "codec Playback", "DAI0 Playback",
-			  "codec Playback", "DAI1 Playback",
-			  "DAI0 Capture",   "codec Capture";
-
-		dais = <&cpu_port>;
-	};
-
-	audio-codec {
-		...
-
-		audio-graph-card,prefix = "codec";
-		audio-graph-card,convert-rate = <48000>;
-		port {
-			reg = <0>;
-			codec_endpoint0: endpoint@0 {
-				remote-endpoint = <&cpu_endpoint0>;
-			};
-			codec_endpoint1: endpoint@1 {
-				remote-endpoint = <&cpu_endpoint1>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		cpu_port: port {
-			cpu_endpoint0: endpoint@0 {
-				remote-endpoint = <&codec_endpoint0>;
-
-				dai-format = "left_j";
-				...
-			};
-			cpu_endpoint1: endpoint@1 {
-				remote-endpoint = <&codec_endpoint1>;
-
-				dai-format = "left_j";
-				...
-			};
-		};
-	};
-
------------------------
-Example: Multi DAI with DPCM
------------------------
-
-	CPU0 ------ ak4613
-	CPU1 ------ HDMI
-	CPU2 ------ PCM3168A-p	/* DPCM 1ch/2ch */
-	CPU3 --/		/* DPCM 3ch/4ch */
-	CPU4 --/		/* DPCM 5ch/6ch */
-	CPU5 --/		/* DPCM 7ch/8ch */
-	CPU6 ------ PCM3168A-c
-
-	sound_card: sound {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-
-		routing =	"pcm3168a Playback", "DAI2 Playback",
-				"pcm3168a Playback", "DAI3 Playback",
-				"pcm3168a Playback", "DAI4 Playback",
-				"pcm3168a Playback", "DAI5 Playback";
-
-		dais = <&snd_port0	/* ak4613 */
-			&snd_port1	/* HDMI0  */
-			&snd_port2	/* pcm3168a playback */
-			&snd_port3	/* pcm3168a capture  */
-			>;
-	};
-
-	ak4613: codec@10 {
-		...
-		port {
-			ak4613_endpoint: endpoint {
-				remote-endpoint = <&rsnd_endpoint0>;
-			};
-		};
-	};
-
-	pcm3168a: audio-codec@44 {
-		...
-		audio-graph-card,prefix = "pcm3168a";
-		audio-graph-card,convert-channels = <8>; /* TDM Split */
-		ports {
-			port@0 {
-				reg = <0>;
-				pcm3168a_endpoint_p1: endpoint@1 {
-					remote-endpoint = <&rsnd_endpoint2>;
-					...
-				};
-				pcm3168a_endpoint_p2: endpoint@2 {
-					remote-endpoint = <&rsnd_endpoint3>;
-					...
-				};
-				pcm3168a_endpoint_p3: endpoint@3 {
-					remote-endpoint = <&rsnd_endpoint4>;
-					...
-				};
-				pcm3168a_endpoint_p4: endpoint@4 {
-					remote-endpoint = <&rsnd_endpoint5>;
-					...
-				};
-			};
-			port@1 {
-				reg = <1>;
-				pcm3168a_endpoint_c: endpoint {
-					remote-endpoint = <&rsnd_endpoint6>;
-					...
-				};
-			};
-		};
-	};
-
-	&sound {
-		ports {
-			snd_port0: port@0 {
-				rsnd_endpoint0: endpoint {
-					remote-endpoint = <&ak4613_endpoint>;
-					...
-				};
-			};
-			snd_port1: port@1 {
-				rsnd_endpoint1: endpoint {
-					remote-endpoint = <&dw_hdmi0_snd_in>;
-					...
-				};
-			};
-			snd_port2: port@2 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rsnd_endpoint2: endpoint@2 {
-					remote-endpoint = <&pcm3168a_endpoint_p1>;
-					...
-				};
-				rsnd_endpoint3: endpoint@3 {
-					remote-endpoint = <&pcm3168a_endpoint_p2>;
-					...
-				};
-				rsnd_endpoint4: endpoint@4 {
-					remote-endpoint = <&pcm3168a_endpoint_p3>;
-					...
-				};
-				rsnd_endpoint5: endpoint@5 {
-					remote-endpoint = <&pcm3168a_endpoint_p4>;
-					...
-				};
-			};
-			snd_port3: port@6 {
-				rsnd_endpoint6: endpoint {
-					remote-endpoint = <&pcm3168a_endpoint_c>;
-					...
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
new file mode 100644
index 000000000000..274092ef36c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+allOf:
+  - $ref: /schemas/sound/audio-graph.yaml#
+
+properties:
+  compatible:
+    enum:
+      - audio-graph-card
+      - audio-graph-scu-card
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "audio-graph-card";
+
+        dais = <&cpu_port_a>;
+    };
+
+    cpu {
+        /*
+         * dai-controller own settings
+         */
+
+        port {
+            cpu_endpoint: endpoint {
+                remote-endpoint = <&codec_endpoint>;
+                dai-format = "left_j";
+            };
+        };
+    };
+
+    codec {
+        /*
+         * codec own settings
+         */
+
+        port {
+            codec_endpoint: endpoint {
+                remote-endpoint = <&cpu_endpoint>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
new file mode 100644
index 000000000000..3de7b36829da
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-card2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card2
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - audio-graph-card2
+  links:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+  label:
+    maxItems: 1
+  routing:
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  multi:
+    type: object
+    description: Multi-CPU/Codec node
+  dpcm:
+    type: object
+    description: DPCM node
+  codec2codec:
+    type: object
+    description: Codec to Codec node
+
+required:
+  - compatible
+  - links
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "audio-graph-card2";
+
+        links = <&cpu_port>;
+    };
+
+    cpu {
+        compatible = "cpu-driver";
+
+        cpu_port: port { cpu_ep: endpoint { remote-endpoint = <&codec_ep>; }; };
+    };
+
+    codec {
+        compatible = "codec-driver";
+
+        port { codec_ep: endpoint { remote-endpoint = <&cpu_ep>; }; };
+    };
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
new file mode 100644
index 000000000000..64654ceef208
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card 'port' Node Bindings
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+select: false
+
+allOf:
+  - $ref: /schemas/graph.yaml#/$defs/port-base
+
+properties:
+  prefix:
+    description: "device name prefix"
+    $ref: /schemas/types.yaml#/definitions/string
+  convert-rate:
+    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate"
+  convert-channels:
+    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels"
+  convert-sample-format:
+    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format"
+
+patternProperties:
+  "^endpoint(@[0-9a-f]+)?":
+    $ref: /schemas/graph.yaml#/$defs/endpoint-base
+    unevaluatedProperties: false
+
+    properties:
+      mclk-fs:
+        description: |
+          Multiplication factor between stream rate and codec mclk.
+          When defined, mclk-fs property defined in dai-link sub nodes are
+          ignored.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      frame-inversion:
+        description: dai-link uses frame clock inversion
+        $ref: /schemas/types.yaml#/definitions/flag
+      bitclock-inversion:
+        description: dai-link uses bit clock inversion
+        $ref: /schemas/types.yaml#/definitions/flag
+      frame-master:
+        description: Indicates dai-link frame master.
+        oneOf:
+          - $ref: /schemas/types.yaml#/definitions/flag
+          - $ref: /schemas/types.yaml#/definitions/phandle
+      bitclock-master:
+        description: Indicates dai-link bit clock master
+        oneOf:
+          - $ref: /schemas/types.yaml#/definitions/flag
+          - $ref: /schemas/types.yaml#/definitions/phandle
+
+      dai-format:
+        description: audio format.
+        items:
+          enum:
+            - i2s
+            - right_j
+            - left_j
+            - dsp_a
+            - dsp_b
+            - ac97
+            - pdm
+            - msb
+            - lsb
+      convert-rate:
+        $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate"
+      convert-channels:
+        $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels"
+      convert-sample-format:
+        $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format"
+
+      dai-tdm-slot-num:
+        description: Number of slots in use.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      dai-tdm-slot-width:
+        description: Width in bits for each slot.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      dai-tdm-slot-width-map:
+        description: Mapping of sample widths to slot widths. For hardware
+          that cannot support a fixed slot width or a slot width always
+          equal to sample width. A matrix of one or more 3-tuples.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            -
+              description: Sample width in bits
+              minimum: 8
+              maximum: 64
+            -
+              description: Slot width in bits
+              minimum: 8
+              maximum: 256
+            -
+              description: Slot count
+              minimum: 1
+              maximum: 64
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/audio-graph.yaml b/Documentation/devicetree/bindings/sound/audio-graph.yaml
new file mode 100644
index 000000000000..d59baedee180
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+  dais:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+  label:
+    maxItems: 1
+  prefix:
+    description: "device name prefix"
+    $ref: /schemas/types.yaml#/definitions/string
+  routing:
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  widgets:
+    description: User specified audio sound widgets.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  convert-rate:
+    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate"
+  convert-channels:
+    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels"
+  convert-sample-format:
+    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format"
+
+  pa-gpios:
+    maxItems: 1
+  hp-det-gpio:
+    maxItems: 1
+  mic-det-gpio:
+    maxItems: 1
+
+required:
+  - dais
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml b/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml
new file mode 100644
index 000000000000..dce86dafe382
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/awinic,aw8738.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW8738 Audio Amplifier
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description:
+  The Awinic AW8738 is a simple audio amplifier with different operation modes
+  (set using one-wire pulse control). The mode configures the speaker-guard
+  function (primarily the power limit for the amplifier).
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  compatible:
+    const: awinic,aw8738
+
+  mode-gpios:
+    description:
+      GPIO used for one-wire pulse control. The pin is typically called SHDN
+      (active-low), but this is misleading since it is actually more than
+      just a simple shutdown/enable control.
+    maxItems: 1
+
+  awinic,mode:
+    description: Operation mode (number of pulses for one-wire pulse control)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 7
+
+  sound-name-prefix: true
+
+required:
+  - compatible
+  - mode-gpios
+  - awinic,mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    audio-amplifier {
+        compatible = "awinic,aw8738";
+        mode-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
+        awinic,mode = <5>;
+        sound-name-prefix = "Speaker Amp";
+    };
diff --git a/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
new file mode 100644
index 000000000000..007f524b4d15
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
@@ -0,0 +1,29 @@
+Broadcom DSL/PON BCM63xx Audio I2S controller
+
+Required properties:
+- compatible:     Should be "brcm,bcm63xx-i2s".
+- #address-cells: 32bit valued, 1 cell.
+- #size-cells:    32bit valued, 0 cell.
+- reg:            Should contain audio registers location and length
+- interrupts:     Should contain the interrupt for the controller.
+- clocks:         Must contain an entry for each entry in clock-names.
+                  Please refer to clock-bindings.txt.
+- clock-names:    One of each entry matching the clocks phandles list:
+                  - "i2sclk" (generated clock) Required.
+                  - "i2sosc" (fixed 200MHz clock) Required.
+
+(1) : The generated clock is required only when any of TX and RX
+      works on Master Mode.
+(2) : The fixed 200MHz clock is from internal chip and always on
+
+Example:
+
+		i2s: bcm63xx-i2s {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63xx-i2s";
+			reg = <0xFF802080 0xFF>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&i2sclk>, <&osc>;
+			clock-names = "i2sclk","i2sosc";
+		};
diff --git a/Documentation/devicetree/bindings/sound/bt-sco.txt b/Documentation/devicetree/bindings/sound/bt-sco.txt
deleted file mode 100644
index 641edf75e184..000000000000
--- a/Documentation/devicetree/bindings/sound/bt-sco.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Bluetooth-SCO audio CODEC
-
-This device support generic Bluetooth SCO link.
-
-Required properties:
-
-  - compatible : "delta,dfbmcs320" or "linux,bt-sco"
-
-Example:
-
-codec: bt_sco {
-	compatible = "delta,dfbmcs320";
-};
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
new file mode 100644
index 000000000000..51d815d0c696
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs35l41.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS35L41 Speaker Amplifier
+
+maintainers:
+  - david.rhodes@cirrus.com
+
+description: |
+  CS35L41 is a boosted mono Class D amplifier with DSP
+  speaker protection and equalization
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs35l40
+      - cirrus,cs35l41
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    description:
+      The first cell indicating the audio interface.
+    const: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  VA-supply:
+    description: voltage regulator phandle for the VA supply
+
+  VP-supply:
+    description: voltage regulator phandle for the VP supply
+
+  cirrus,boost-peak-milliamp:
+    description:
+      Boost-converter peak current limit in mA.
+      Configures the peak current by monitoring the current through the boost FET.
+      Range starts at 1600 mA and goes to a maximum of 4500 mA with increments
+      of 50 mA. See section 4.3.6 of the datasheet for details.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 1600
+    maximum: 4500
+    default: 4500
+
+  cirrus,boost-ind-nanohenry:
+    description:
+      Boost inductor value, expressed in nH. Valid
+      values include 1000, 1200, 1500 and 2200.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 1000
+    maximum: 2200
+
+  cirrus,boost-cap-microfarad:
+    description:
+      Total equivalent boost capacitance on the VBST
+      and VAMP pins, derated at 11 volts DC. The value must be rounded to the
+      nearest integer and expressed in uF.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  cirrus,asp-sdout-hiz:
+    description:
+      Audio serial port SDOUT Hi-Z control. Sets the Hi-Z
+      configuration for SDOUT pin of amplifier.
+      0 = Logic 0 during unused slots, and while all transmit channels disabled
+      1 = Hi-Z during unused slots but logic 0 while all transmit channels disabled
+      2 = (Default) Logic 0 during unused slots, but Hi-Z while all transmit channels disabled
+      3 = Hi-Z during unused slots and while all transmit channels disabled
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 3
+    default: 2
+
+  cirrus,boost-type:
+    description:
+      Configures the type of Boost being used.
+      Internal boost requires boost-peak-milliamp, boost-ind-nanohenry and
+      boost-cap-microfarad.
+      External Boost must have GPIO1 as GPIO output. GPIO1 will be set high to
+      enable boost voltage.
+      0 = Internal Boost
+      1 = External Boost
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 1
+
+  cirrus,gpio1-polarity-invert:
+    description:
+      Boolean which specifies whether the GPIO1
+      level is inverted. If this property is not present the level is not inverted.
+    type: boolean
+
+  cirrus,gpio1-output-enable:
+    description:
+      Boolean which specifies whether the GPIO1 pin
+      is configured as an output. If this property is not present the
+      pin will be configured as an input.
+    type: boolean
+
+  cirrus,gpio1-src-select:
+    description:
+      Configures the function of the GPIO1 pin.
+      Note that the options are different from the GPIO2 pin
+      0 = High Impedance (Default)
+      1 = GPIO
+      2 = Sync
+      3 = MCLK input
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 3
+
+  cirrus,gpio2-polarity-invert:
+    description:
+      Boolean which specifies whether the GPIO2
+      level is inverted. If this property is not present the level is not inverted.
+    type: boolean
+
+  cirrus,gpio2-output-enable:
+    description:
+      Boolean which specifies whether the GPIO2 pin
+      is configured as an output. If this property is not present the
+      pin will be configured as an input.
+    type: boolean
+
+  cirrus,gpio2-src-select:
+    description:
+      Configures the function of the GPIO2 pin.
+      Note that the options are different from the GPIO1 pin.
+      0 = High Impedance (Default)
+      1 = GPIO
+      2 = Open Drain INTB
+      3 = MCLK input
+      4 = Push-pull INTB (active low)
+      5 = Push-pull INT (active high)
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 5
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+allOf:
+  - if:
+      properties:
+        cirrus,boost-type:
+          const: 0
+    then:
+      required:
+        - cirrus,boost-peak-milliamp
+        - cirrus,boost-ind-nanohenry
+        - cirrus,boost-cap-microfarad
+    else:
+      if:
+        properties:
+          cirrus,boost-type:
+            const: 1
+      then:
+        required:
+          - cirrus,gpio1-output-enable
+          - cirrus,gpio1-src-select
+        properties:
+          cirrus,boost-peak-milliamp: false
+          cirrus,boost-ind-nanohenry: false
+          cirrus,boost-cap-microfarad: false
+          cirrus,gpio1-src-select:
+            enum: [1]
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cs35l41: cs35l41@2 {
+          #sound-dai-cells = <1>;
+          compatible = "cirrus,cs35l41";
+          reg = <2>;
+          VA-supply = <&dummy_vreg>;
+          VP-supply = <&dummy_vreg>;
+          reset-gpios = <&gpio 110 0>;
+
+          cirrus,boost-type = <0>;
+          cirrus,boost-peak-milliamp = <4500>;
+          cirrus,boost-ind-nanohenry = <1000>;
+          cirrus,boost-cap-microfarad = <15>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
new file mode 100644
index 000000000000..184a1344ea76
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs35l45.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS35L45 Speaker Amplifier
+
+maintainers:
+  - Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
+  - Richard Fitzgerald <rf@opensource.cirrus.com>
+
+description: |
+  CS35L45 is a Boosted Mono Class D Amplifier with DSP
+  Speaker Protection and Adaptive Battery Management.
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs35l45
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-a-supply:
+    description: voltage regulator phandle for the VDD_A supply
+
+  vdd-batt-supply:
+    description: voltage regulator phandle for the VDD_BATT supply
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  cirrus,asp-sdout-hiz-ctrl:
+    description:
+      Audio serial port SDOUT Hi-Z control. Sets the Hi-Z
+      configuration for SDOUT pin of amplifier. Logical OR of
+      CS35L45_ASP_TX_HIZ_xxx values.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 3
+    default: 2
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/cs35l45.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cs35l45: cs35l45@2 {
+          #sound-dai-cells = <1>;
+          compatible = "cirrus,cs35l45";
+          reg = <2>;
+          spi-max-frequency = <5000000>;
+          vdd-a-supply = <&dummy_vreg>;
+          vdd-batt-supply = <&dummy_vreg>;
+          reset-gpios = <&gpio 110 0>;
+          cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED |
+                                        CS35L45_ASP_TX_HIZ_DISABLED)>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs4234.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs4234.yaml
new file mode 100644
index 000000000000..156560b2a980
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs4234.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs4234.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic cs4234 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description:
+  The CS4234 is a highly versatile CODEC that combines 4 channels of
+  high performance analog to digital conversion, 4 channels of high
+  performance digital to analog conversion for audio, and 1 channel of
+  digital to analog conversion to provide a nondelayed audio reference
+  signal to an external Class H tracking power supply. If not used to
+  drive a tracking power supply, the 5th DAC can instead be used as a
+  standard audio grade DAC, with performance specifications identical
+  to that of the 4 DACs in the audio path. Additionally, the CS4234
+  includes tunable group delay for each of the 4 audio DAC paths to
+  provide lead time for the external switch-mode power supply, and a
+  nondelayed path into the DAC outputs for input signals requiring a
+  low-latency path to the outputs.
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs4234
+
+  reg:
+    description:
+      The 7-bit I2C address depends on the state of the ADx pins, in
+      binary given by [0 0 1 0 AD2 AD1 AD0 0].
+    items:
+      minimum: 0x10
+      maximum: 0x17
+
+  VA-supply:
+    description:
+      Analogue power supply.
+
+  VL-supply:
+    description:
+      Interface power supply.
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - VA-supply
+  - VL-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@e0004000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0004000 0x1000>;
+
+        cs4234: codec@11 {
+            compatible = "cirrus,cs4234";
+            reg = <0x11>;
+
+            VA-supply = <&vdd3v3>;
+            VL-supply = <&vdd3v3>;
+
+            reset-gpios = <&gpio 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml
new file mode 100644
index 000000000000..7356084a2ca2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs42l42.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS42L42 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description:
+  The CS42L42 is a low-power audio codec designed for portable applications.
+  It provides a high-dynamic range, stereo DAC for audio playback and a mono
+  high-dynamic-range ADC for audio capture. There is an integrated headset
+  detection block.
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs42l42
+      - cirrus,cs42l83
+
+  reg:
+    description:
+      The I2C address of the CS42L42.
+    maxItems: 1
+
+  VP-supply:
+    description:
+      VP power supply.
+
+  VCP-supply:
+    description:
+      Charge pump power supply.
+
+  VD_FILT-supply:
+    description:
+      FILT+ power supply.
+
+  VL-supply:
+    description:
+      Logic power supply.
+
+  VA-supply:
+    description:
+      Analog power supply.
+
+  reset-gpios:
+    description:
+      This pin will be asserted and then deasserted to reset the
+      CS42L42 before communication starts.
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt for CS42L42 IRQ line.
+    maxItems: 1
+
+  cirrus,ts-inv:
+    description: |
+      Sets the behaviour of the jack plug detect switch.
+
+      0 - (Default) Shorted to tip when unplugged, open when plugged.
+      This is "inverted tip sense (ITS)" in the datasheet.
+
+      1 - Open when unplugged, shorted to tip when plugged.
+      This is "normal tip sense (TS)" in the datasheet.
+
+      The CS42L42_TS_INV_* defines are available for this.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 1
+
+  cirrus,ts-dbnc-rise:
+    description: |
+      Debounce the rising edge of TIP_SENSE_PLUG. With no
+      debounce, the tip sense pin might be noisy on a plug event.
+
+      0 - 0ms
+      1 - 125ms
+      2 - 250ms
+      3 - 500ms
+      4 - 750ms
+      5 - 1s (Default)
+      6 - 1.25s
+      7 - 1.5s
+
+      The CS42L42_TS_DBNCE_* defines are available for this.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 7
+
+  cirrus,ts-dbnc-fall:
+    description: |
+      Debounce the falling edge of TIP_SENSE_UNPLUG. With no
+      debounce, the tip sense pin might be noisy on an unplug event.
+
+      0 - 0ms
+      1 - 125ms
+      2 - 250ms
+      3 - 500ms
+      4 - 750ms
+      5 - 1s (Default)
+      6 - 1.25s
+      7 - 1.5s
+
+      The CS42L42_TS_DBNCE_* defines are available for this.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 7
+
+  cirrus,btn-det-init-dbnce:
+    description: |
+      This sets how long to wait after enabling button detection
+      interrupts before servicing button interrupts, to allow the
+      HS bias time to settle. Value is in milliseconds.
+      There may be erroneous button interrupts if this debounce time
+      is too short.
+
+      0ms - 200ms,
+      Default = 100ms
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 200
+
+  cirrus,btn-det-event-dbnce:
+    description: |
+      This sets how long to wait after receiving a button press
+      interrupt before processing it. Allows time for the button
+      press to make a clean connection with the bias resistors.
+      Value is in milliseconds.
+
+      0ms - 20ms,
+      Default = 10ms
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 20
+
+  cirrus,bias-lvls:
+    description: |
+      For a level-detect headset button scheme, each button will bias
+      the mic pin to a certain voltage. To determine which button was
+      pressed, the voltage is compared to sequential, decreasing
+      voltages, until the compared voltage < bias voltage.
+      For different hardware setups, a designer might want to tweak this.
+      This is an array of descending values for the comparator voltage,
+      given as percent of the HSBIAS voltage.
+
+      Array of 4 values, each 0-63
+      < x1 x2 x3 x4 >
+      Default = < 15 8 4 1 >
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 63
+
+  cirrus,hs-bias-ramp-rate:
+    description: |
+      If present this sets the rate that the HS bias should rise and fall.
+      The actual rise and fall times depend on external hardware (the
+      datasheet gives several rise and fall time examples).
+
+      0 - Fast rise time; slow, load-dependent fall time
+      1 - Fast
+      2 - Slow (default)
+      3 - Slowest
+
+      The CS42L42_HSBIAS_RAMP_* defines are available for this.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 3
+
+  cirrus,hs-bias-sense-disable:
+    description: |
+      If present the HSBIAS sense is disabled. Configures HSBIAS output
+      current sense through the external 2.21-k resistor. HSBIAS_SENSE
+      is a hardware feature to reduce the potential pop noise when the
+      headset plug is removed slowly. But on some platforms ESD voltage
+      will affect it causing plug detection to fail, especially with CTIA
+      headset type. For different hardware setups, a designer might want
+      to tweak default behavior.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - VP-supply
+  - VCP-supply
+  - VD_FILT-supply
+  - VL-supply
+  - VA-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/cs42l42.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs42l42: cs42l42@48 {
+          compatible = "cirrus,cs42l42";
+          reg = <0x48>;
+          VA-supply = <&dummy_vreg>;
+          VP-supply = <&dummy_vreg>;
+          VCP-supply = <&dummy_vreg>;
+          VD_FILT-supply = <&dummy_vreg>;
+          VL-supply = <&dummy_vreg>;
+
+          reset-gpios = <&axi_gpio_0 1 0>;
+          interrupt-parent = <&gpio0>;
+          interrupts = <55 8>;
+
+          cirrus,ts-inv = <CS42L42_TS_INV_DIS>;
+          cirrus,ts-dbnc-rise = <CS42L42_TS_DBNCE_1000>;
+          cirrus,ts-dbnc-fall = <CS42L42_TS_DBNCE_0>;
+          cirrus,btn-det-init-dbnce = <100>;
+          cirrus,btn-det-event-dbnce = <10>;
+          cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>;
+          cirrus,hs-bias-ramp-rate = <CS42L42_HSBIAS_RAMP_SLOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
new file mode 100644
index 000000000000..963a871e74da
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs42l51.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CS42L51 audio codec DT bindings
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@foss.st.com>
+
+properties:
+  compatible:
+    const: cirrus,cs42l51
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: MCLK
+
+  reset-gpios:
+    maxItems: 1
+
+  VL-supply:
+    description: phandle to voltage regulator of digital interface section
+
+  VD-supply:
+    description: phandle to voltage regulator of digital internal section
+
+  VA-supply:
+    description: phandle to voltage regulator of analog internal section
+
+  VAHP-supply:
+    description: phandle to voltage regulator of headphone
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs42l51@4a {
+        compatible = "cirrus,cs42l51";
+        reg = <0x4a>;
+        #sound-dai-cells = <0>;
+        clocks = <&mclk_prov>;
+        clock-names = "MCLK";
+        VL-supply = <&reg_audio>;
+        VD-supply = <&reg_audio>;
+        VA-supply = <&reg_audio>;
+        VAHP-supply = <&reg_audio>;
+        reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
deleted file mode 100644
index 41ae2699f07a..000000000000
--- a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform.  Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the audio portion
-of the driver.
-
-This binding must be part of the Lochnagar MFD binding:
-  [4] ../mfd/cirrus,lochnagar.txt
-
-Required properties:
-
-  - compatible : One of the following strings:
-                 "cirrus,lochnagar2-soundcard"
-
-  - #sound-dai-cells : Must be set to 1.
-
-  - clocks : Contains an entry for each entry in clock-names.
-  - clock-names : Must include the following clocks:
-      "mclk" Master clock source for the sound card, should normally
-      be set to LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar
-      clock driver.
-
-Example:
-
-lochnagar-sc {
-	compatible = "cirrus,lochnagar2-soundcard";
-
-	#sound-dai-cells = <1>;
-
-	clocks = <&lochnagar_clk LOCHNAGAR_SOUNDCARD_MCLK>;
-	clock-names = "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml
new file mode 100644
index 000000000000..cea612d3d4a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of various
+  application processor systems to provide a full evaluation platform.
+  Audio system topology, clocking and power can all be controlled through
+  the Lochnagar, allowing the device under test to be used in a variety of
+  possible use cases.
+
+  This binding document describes the binding for the audio portion of the
+  driver.
+
+  This binding must be part of the Lochnagar MFD binding:
+    [1] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar2-soundcard
+
+  '#sound-dai-cells':
+    description:
+      The first cell indicating the audio interface.
+    const: 1
+
+  clocks:
+    description:
+      Master clock source for the sound card, should normally be set to
+      LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar clock driver.
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+required:
+  - compatible
+  - '#sound-dai-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml
new file mode 100644
index 000000000000..23138ddcb62d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,madera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Madera class audio CODECs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  This describes audio configuration bindings for these codecs.
+
+  See also the core bindings for the parent MFD driver:
+
+    Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+
+  and defines for values used in these bindings:
+
+    include/dt-bindings/sound/madera.h
+
+  The properties are all contained in the parent MFD node.
+
+properties:
+  '#sound-dai-cells':
+    description:
+      The first cell indicating the audio interface.
+    const: 1
+
+  cirrus,inmode:
+    description:
+      A list of input mode settings for each input. A maximum
+      of 24 cells, with four cells per input in the order INnAL,
+      INnAR INnBL INnBR.  For non-muxed inputs the first two cells
+      for that input set the mode for the left and right channel
+      and the second two cells must be 0.  For muxed inputs the
+      first two cells for that input set the mode of the left and
+      right A inputs and the second two cells set the mode of the
+      left and right B inputs.  Valid mode values are one of the
+      MADERA_INMODE_xxx. If the array is shorter than the number
+      of inputs the unspecified inputs default to MADERA_INMODE_DIFF.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 24
+    items:
+      minimum: 0
+      maximum: 1
+      default: 0
+
+  cirrus,out-mono:
+    description:
+      Mono bit for each output, maximum of six cells if the array
+      is shorter outputs will be set to stereo.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 6
+    items:
+      minimum: 0
+      maximum: 1
+      default: 0
+
+  cirrus,dmic-ref:
+    description: |
+      Indicates how the MICBIAS pins have been externally connected
+      to DMICs on each input, one cell per input.
+
+        <IN1 IN2 IN3 ...>
+
+      A value of 0 indicates MICVDD and is the default,
+      other values depend on the codec: For CS47L35 one of the
+      CS47L35_DMIC_REF_xxx values For all other codecs one of
+      the MADERA_DMIC_REF_xxx values Also see the datasheet for a
+      description of the INn_DMIC_SUP field.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 6
+    items:
+      minimum: 0
+      maximum: 3
+      default: 0
+
+  cirrus,max-channels-clocked:
+    description:
+      Maximum number of channels that I2S clocks will be generated
+      for. Useful when clock master for systems where the I2S bus
+      has multiple data lines.  One cell for each AIF, use a value
+      of zero for AIFs that should be handled normally.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      default: 0
+
+  cirrus,pdm-fmt:
+    description:
+      PDM speaker data format, must contain 2 cells (OUT5 and
+      OUT6). See the PDM_SPKn_FMT field in the datasheet for a
+      description of this value. The second cell is ignored for
+      codecs that do not have OUT6.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+  cirrus,pdm-mute:
+    description: |
+      PDM mute format, must contain 2 cells (OUT5 and OUT6). See the
+      PDM_SPKn_CTRL_1 register in the datasheet for a description
+      of this value.  The second cell is ignored for codecs that
+      do not have OUT6.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/cs42l42.txt b/Documentation/devicetree/bindings/sound/cs42l42.txt
deleted file mode 100644
index 7dfaa2ab906f..000000000000
--- a/Documentation/devicetree/bindings/sound/cs42l42.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-CS42L42 audio CODEC
-
-Required properties:
-
-  - compatible : "cirrus,cs42l42"
-
-  - reg : the I2C address of the device for I2C.
-
-  - VP-supply, VCP-supply, VD_FILT-supply, VL-supply, VA-supply :
-  power supplies for the device, as covered in
-  Documentation/devicetree/bindings/regulator/regulator.txt.
-
-Optional properties:
-
-  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
-  deasserted before communication to the codec starts.
-
-  - interrupts : IRQ line info CS42L42.
-  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-  for further information relating to interrupt properties)
-
-  - cirrus,ts-inv : Boolean property. For jacks that invert the tip sense
-  polarity. Normal jacks will short tip sense pin to HS1 when headphones are
-  plugged in and leave tip sense floating when not plugged in. Inverting jacks
-  short tip sense when unplugged and float when plugged in.
-
-  0 = (Default) Non-inverted
-  1 = Inverted
-
-  - cirrus,ts-dbnc-rise : Debounce the rising edge of TIP_SENSE_PLUG. With no
-  debounce, the tip sense pin might be noisy on a plug event.
-
-  0 - 0ms,
-  1 - 125ms,
-  2 - 250ms,
-  3 - 500ms,
-  4 - 750ms,
-  5 - (Default) 1s,
-  6 - 1.25s,
-  7 - 1.5s,
-
-  - cirrus,ts-dbnc-fall : Debounce the falling edge of TIP_SENSE_UNPLUG.
-  With no debounce, the tip sense pin might be noisy on an unplug event.
-
-  0 - 0ms,
-  1 - 125ms,
-  2 - 250ms,
-  3 - 500ms,
-  4 - 750ms,
-  5 - (Default) 1s,
-  6 - 1.25s,
-  7 - 1.5s,
-
-  - cirrus,btn-det-init-dbnce : This sets how long the driver sleeps after
-  enabling button detection interrupts. After auto-detection and before
-  servicing button interrupts, the HS bias needs time to settle. If you
-  don't wait, there is possibility for erroneous button interrupt.
-
-  0ms - 200ms,
-  Default = 100ms
-
-  - cirrus,btn-det-event-dbnce : This sets how long the driver delays after
-  receiving a button press interrupt. With level detect interrupts, you want
-  to wait a small amount of time to make sure the button press is making a
-  clean connection with the bias resistors.
-
-  0ms - 20ms,
-  Default = 10ms
-
-  - cirrus,bias-lvls : For a level-detect headset button scheme, each button
-  will bias the mic pin to a certain voltage. To determine which button was
-  pressed, the driver will compare this biased voltage to sequential,
-  decreasing voltages and will stop when a comparator is tripped,
-  indicating a comparator voltage < bias voltage. This value represents a
-  percentage of the internally generated HS bias voltage. For different
-  hardware setups, a designer might want to tweak this. This is an array of
-  descending values for the comparator voltage.
-
-  Array of 4 values
-  Each 0-63
-  < x1 x2 x3 x4 >
-  Default = < 15 8 4 1>
-
-
-Example:
-
-cs42l42: cs42l42@48 {
-	compatible = "cirrus,cs42l42";
-	reg = <0x48>;
-	VA-supply = <&dummy_vreg>;
-	VP-supply = <&dummy_vreg>;
-	VCP-supply = <&dummy_vreg>;
-	VD_FILT-supply = <&dummy_vreg>;
-	VL-supply = <&dummy_vreg>;
-
-	reset-gpios = <&axi_gpio_0 1 0>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <55 8>
-
-	cirrus,ts-inv = <0x00>;
-	cirrus,ts-dbnc-rise = <0x05>;
-	cirrus,ts-dbnc-fall = <0x00>;
-	cirrus,btn-det-init-dbnce = <100>;
-	cirrus,btn-det-event-dbnce = <10>;
-	cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>;
-	cirrus,hs-bias-ramp-rate = <0x02>;
-};
diff --git a/Documentation/devicetree/bindings/sound/cs42l51.txt b/Documentation/devicetree/bindings/sound/cs42l51.txt
deleted file mode 100644
index acbd68ddd2cb..000000000000
--- a/Documentation/devicetree/bindings/sound/cs42l51.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-CS42L51 audio CODEC
-
-Required properties:
-
-  - compatible : "cirrus,cs42l51"
-
-  - reg : the I2C address of the device for I2C.
-
-Optional properties:
-  - VL-supply, VD-supply, VA-supply, VAHP-supply: power supplies for the device,
-    as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
-
-  - reset-gpios : GPIO specification for the reset pin. If specified, it will be
-    deasserted before starting the communication with the codec.
-
-  - clocks : a list of phandles + clock-specifiers, one for each entry in
-    clock-names
-
-  - clock-names : must contain "MCLK"
-
-Example:
-
-cs42l51: cs42l51@4a {
-	compatible = "cirrus,cs42l51";
-	reg = <0x4a>;
-	clocks = <&mclk_prov>;
-	clock-names = "MCLK";
-	VL-supply = <&reg_audio>;
-	VD-supply = <&reg_audio>;
-	VA-supply = <&reg_audio>;
-	VAHP-supply = <&reg_audio>;
-	reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
-};
diff --git a/Documentation/devicetree/bindings/sound/da7213.txt b/Documentation/devicetree/bindings/sound/da7213.txt
index 58902802d56c..94584c96c4ae 100644
--- a/Documentation/devicetree/bindings/sound/da7213.txt
+++ b/Documentation/devicetree/bindings/sound/da7213.txt
@@ -1,9 +1,9 @@
-Dialog Semiconductor DA7213 Audio Codec bindings
+Dialog Semiconductor DA7212/DA7213 Audio Codec bindings
 
 ======
 
 Required properties:
-- compatible : Should be "dlg,da7213"
+- compatible : Should be "dlg,da7212" or "dlg,da7213"
 - reg: Specifies the I2C slave address
 
 Optional properties:
@@ -21,6 +21,10 @@ Optional properties:
 - dlg,dmic-clkrate : DMIC clock frequency (Hz).
 	[<1500000>, <3000000>]
 
+ - VDDA-supply : Regulator phandle for Analogue power supply
+ - VDDMIC-supply : Regulator phandle for Mic Bias
+ - VDDIO-supply : Regulator phandle for I/O power supply
+
 ======
 
 Example:
diff --git a/Documentation/devicetree/bindings/sound/da9055.txt b/Documentation/devicetree/bindings/sound/da9055.txt
index ed1b7cc6f249..75c6338b6ae2 100644
--- a/Documentation/devicetree/bindings/sound/da9055.txt
+++ b/Documentation/devicetree/bindings/sound/da9055.txt
@@ -2,7 +2,7 @@
 
 DA9055 provides Audio CODEC support (I2C only).
 
-The Audio CODEC device in DA9055 has it's own I2C address which is configurable,
+The Audio CODEC device in DA9055 has its own I2C address which is configurable,
 so the device is instantiated separately from the PMIC (MFD) device.
 
 For details on accompanying PMIC I2C device, see the following:
diff --git a/Documentation/devicetree/bindings/sound/dai-params.yaml b/Documentation/devicetree/bindings/sound/dai-params.yaml
new file mode 100644
index 000000000000..f5fb71f9b603
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/dai-params.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dai-params.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Digital Audio Interface (DAI) Stream Parameters
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+select: false
+
+$defs:
+
+  dai-channels:
+    description: Number of audio channels used by DAI
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+
+  dai-sample-format:
+    description: Audio sample format used by DAI
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - s8
+      - s16_le
+      - s24_le
+      - s24_3le
+      - s32_le
+
+  dai-sample-rate:
+    description: Audio sample rate used by DAI
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8000
+    maximum: 192000
+
+properties: {}
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
deleted file mode 100644
index c483dcec01f8..000000000000
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-Texas Instruments McASP controller
-
-Required properties:
-- compatible :
-	"ti,dm646x-mcasp-audio"	: for DM646x platforms
-	"ti,da830-mcasp-audio"	: for both DA830 & DA850 platforms
-	"ti,am33xx-mcasp-audio"	: for AM33xx platforms (AM33xx, AM43xx, TI81xx)
-	"ti,dra7-mcasp-audio"	: for DRA7xx platforms
-
-- reg : Should contain reg specifiers for the entries in the reg-names property.
-- reg-names : Should contain:
-         * "mpu" for the main registers (required). For compatibility with
-           existing software, it is recommended this is the first entry.
-         * "dat" for separate data port register access (optional).
-- op-mode : I2S/DIT ops mode. 0 for I2S mode. 1 for DIT mode used for S/PDIF,
-  	    IEC60958-1, and AES-3 formats.
-- tdm-slots : Slots for TDM operation. Indicates number of channels transmitted
-  	      or received over one serializer.
-- serial-dir : A list of serializer configuration. Each entry is a number
-               indication for serializer pin direction.
-               (0 - INACTIVE, 1 - TX, 2 - RX)
-- dmas: two element list of DMA controller phandles and DMA request line
-        ordered pairs.
-- dma-names: identifier string for each DMA request line in the dmas property.
-	     These strings correspond 1:1 with the ordered pairs in dmas. The dma
-	     identifiers must be "rx" and "tx".
-
-Optional properties:
-
-- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0
-- tx-num-evt : FIFO levels.
-- rx-num-evt : FIFO levels.
-- dismod : Specify the drive on TX pin during inactive slots
-	0 : 3-state
-	2 : logic low
-	3 : logic high
-	Defaults to 'logic low' when the property is not present
-- sram-size-playback : size of sram to be allocated during playback
-- sram-size-capture  : size of sram to be allocated during capture
-- interrupts : Interrupt numbers for McASP
-- interrupt-names : Known interrupt names are "tx" and "rx"
-- pinctrl-0: Should specify pin control group used for this controller.
-- pinctrl-names: Should contain only one value - "default", for more details
-  		 please refer to pinctrl-bindings.txt
-- fck_parent : Should contain a valid clock name which will be used as parent
-	       for the McASP fck
-- auxclk-fs-ratio: When McASP is bus master indicates the ratio between AUCLK
-		   and FS rate if applicable:
-		   AUCLK rate = auxclk-fs-ratio * FS rate
-
-Optional GPIO support:
-If any McASP pin need to be used as GPIO then the McASP node must have:
-...
-  gpio-controller
-  #gpio-cells = <2>;
-...
-
-When requesting a GPIO, the first parameter is the PIN index in McASP_P*
-registers.
-For example to request the AXR2 pin of mcasp8:
-function-gpios = <&mcasp8 2 0>;
-
-Or to request the ACLKR pin of mcasp8:
-function-gpios = <&mcasp8 29 0>;
-
-For generic gpio information, please refer to bindings/gpio/gpio.txt
-
-Example:
-
-mcasp0: mcasp0@1d00000 {
-	compatible = "ti,da830-mcasp-audio";
-	reg = <0x100000 0x3000>;
-	reg-names "mpu";
-	interrupts = <82>, <83>;
-	interrupt-names = "tx", "rx";
-	op-mode = <0>;		/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <
-			0 0 0 0	/* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 0 0
-			0 0 0 1
-			2 0 0 0 >;
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
-};
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
new file mode 100644
index 000000000000..f46c66bc6b2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/davinci-mcasp-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: McASP Controller for TI SoCs
+
+maintainers:
+  - Jayesh Choudhary <j-choudhary@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,dm646x-mcasp-audio
+      - ti,da830-mcasp-audio
+      - ti,am33xx-mcasp-audio
+      - ti,dra7-mcasp-audio
+      - ti,omap4-mcasp-audio
+
+  reg:
+    minItems: 1
+    items:
+      - description: CFG registers
+      - description: data registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mpu
+      - const: dat
+
+  op-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: 0 - I2S or 1 - DIT operation mode
+    enum:
+      - 0
+      - 1
+
+  tdm-slots:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      number of channels over one serializer
+      the property is ignored in DIT mode
+    minimum: 2
+    maximum: 32
+
+  serial-dir:
+    description:
+      A list of serializer configuration
+      Entry is indication for serializer pin direction
+      0 - Inactive, 1 - TX, 2 - RX
+      All AXR pins should be present in the array even if inactive
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 25
+    items:
+      minimum: 0
+      maximum: 2
+
+  dmas:
+    minItems: 1
+    items:
+      - description: transmission DMA channel
+      - description: reception DMA channel
+
+  dma-names:
+    minItems: 1
+    items:
+      - const: tx
+      - const: rx
+
+  ti,hwmods:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Name of hwmod associated with McASP
+    maxItems: 1
+    deprecated: true
+
+  tx-num-evt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      configures WFIFO threshold
+      0 disables the FIFO use
+      if property is missing, then also FIFO use is disabled
+
+  rx-num-evt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      configures RFIFO threshold
+      0 disables the FIFO use
+      if property is missing, then also FIFO use is disabled
+
+  dismod:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      specify the drive on TX pin during inactive time slots
+      0 - 3-state, 2 - logic low, 3 - logic high
+    enum:
+      - 0
+      - 2
+      - 3
+    default: 2
+
+  interrupts:
+    anyOf:
+      - minItems: 1
+        items:
+          - description: TX interrupt
+          - description: RX interrupt
+      - items:
+          - description: common/combined interrupt
+
+  interrupt-names:
+    oneOf:
+      - minItems: 1
+        items:
+          - const: tx
+          - const: rx
+      - const: common
+
+  fck_parent:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: parent clock name for McASP fck
+    maxItems: 1
+
+  auxclk-fs-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: ratio of AUCLK and FS rate if applicable
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  clocks:
+    minItems: 1
+    items:
+      - description: functional clock
+      - description: module specific optional ahclkx clock
+      - description: module specific optional ahclkr clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: fck
+      - const: ahclkx
+      - const: ahclkr
+
+  power-domains:
+    description: phandle to the corresponding power-domain
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  port:
+    description: connection for when McASP is used via graph card
+    type: object
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - dmas
+  - dma-names
+  - interrupts
+  - interrupt-names
+
+allOf:
+  - if:
+      properties:
+        opmode:
+          enum:
+            - 0
+
+    then:
+      required:
+        - tdm-slots
+
+additionalProperties: false
+
+examples:
+  - |
+    mcasp0: mcasp0@1d00000 {
+      compatible = "ti,da830-mcasp-audio";
+      reg = <0x100000 0x3000>;
+      reg-names = "mpu";
+      interrupts = <82>, <83>;
+      interrupt-names = "tx", "rx";
+      op-mode = <0>;		/* MCASP_IIS_MODE */
+      tdm-slots = <2>;
+      dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+      dma-names = "tx", "rx";
+      serial-dir = <
+          0 0 0 0	/* 0: INACTIVE, 1: TX, 2: RX */
+          0 0 0 0
+          0 0 0 1
+          2 0 0 0 >;
+      tx-num-evt = <1>;
+      rx-num-evt = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt
deleted file mode 100644
index 6a536d570e29..000000000000
--- a/Documentation/devicetree/bindings/sound/designware-i2s.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-DesignWare I2S controller
-
-Required properties:
- - compatible : Must be "snps,designware-i2s"
- - reg : Must contain the I2S core's registers location and length
- - clocks : Pairs of phandle and specifier referencing the controller's
-   clocks. The controller expects one clock: the clock used as the sampling
-   rate reference clock sample.
- - clock-names : "i2sclk" for the sample rate reference clock.
- - dmas: Pairs of phandle and specifier for the DMA channels that are used by
-   the core. The core expects one or two dma channels: one for transmit and
-   one for receive.
- - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
-
-Optional properties:
- - interrupts: The interrupt line number for the I2S controller. Add this
-   parameter if the I2S controller that you are using does not support DMA.
-
-For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
-properties please check:
-	* resource-names.txt
-	* clock/clock-bindings.txt
-	* dma/dma.txt
-
-Example:
-
-	soc_i2s: i2s@7ff90000 {
-		compatible = "snps,designware-i2s";
-		reg = <0x0 0x7ff90000 0x0 0x1000>;
-		clocks = <&scpi_i2sclk 0>;
-		clock-names = "i2sclk";
-		#sound-dai-cells = <0>;
-		dmas = <&dma0 5>;
-		dma-names = "tx";
-	};
diff --git a/Documentation/devicetree/bindings/sound/everest,es8316.txt b/Documentation/devicetree/bindings/sound/everest,es8316.txt
deleted file mode 100644
index 1bf03c5f2af4..000000000000
--- a/Documentation/devicetree/bindings/sound/everest,es8316.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Everest ES8316 audio CODEC
-
-This device supports both I2C and SPI.
-
-Required properties:
-
-  - compatible  : should be "everest,es8316"
-  - reg : the I2C address of the device for I2C
-
-Optional properties:
-
-  - clocks : a list of phandle, should contain entries for clock-names
-  - clock-names : should include as follows:
-         "mclk" : master clock (MCLK) of the device
-
-Example:
-
-es8316: codec@11 {
-	compatible = "everest,es8316";
-	reg = <0x11>;
-	clocks = <&clks 10>;
-	clock-names = "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/everest,es8316.yaml b/Documentation/devicetree/bindings/sound/everest,es8316.yaml
new file mode 100644
index 000000000000..3b752bba748b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/everest,es8316.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8316.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8316 audio CODEC
+
+maintainers:
+  - Daniel Drake <drake@endlessm.com>
+  - Katsuhiro Suzuki <katsuhiro@katsuster.net>
+
+properties:
+  compatible:
+    const: everest,es8316
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for master clock (MCLK)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      es8316: codec@11 {
+        compatible = "everest,es8316";
+        reg = <0x11>;
+        clocks = <&clks 10>;
+        clock-names = "mclk";
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/everest,es8326.yaml b/Documentation/devicetree/bindings/sound/everest,es8326.yaml
new file mode 100755
index 000000000000..07781408e788
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/everest,es8326.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8326.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8326 audio CODEC
+
+maintainers:
+  - David Yang <yangxiaohua@everest-semi.com>
+
+properties:
+  compatible:
+    const: everest,es8326
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for master clock (MCLK)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  "#sound-dai-cells":
+    const: 0
+
+  everest,jack-pol:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      just the value of reg 57. Bit(3) decides whether the jack polarity is inverted.
+      Bit(2) decides whether the button on the headset is inverted.
+      Bit(1)/(0) decides the mic properity to be OMTP/CTIA or auto.
+    minimum: 0x00
+    maximum: 0x0f
+    default: 0x0f
+
+  everest,mic1-src:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      the value of reg 2A when headset plugged.
+    minimum: 0x00
+    maximum: 0x77
+    default: 0x22
+
+  everest,mic2-src:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      the value of reg 2A when headset unplugged.
+    minimum: 0x00
+    maximum: 0x77
+    default: 0x44
+
+  everest,jack-detect-inverted:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Defined to invert the jack detection.
+
+  everest,interrupt-src:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      value of reg 0x58, Defines the interrupt source.
+      Bit(2) 1 means button press triggers irq, 0 means not.
+      Bit(3) 1 means PIN9 is the irq source for jack detection. When set to 0,
+      bias change on PIN9 do not triggers irq.
+      Bit(4) 1 means PIN27 is the irq source for jack detection.
+      Bit(5) 1 means PIN9 is the irq source after MIC detect.
+      Bit(6) 1 means PIN27 is the irq source after MIC detect.
+    minimum: 0
+    maximum: 0x3c
+    default: 0x08
+
+  everest,interrupt-clk:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+     value of reg 0x59, Defines the interrupt output behavior.
+     Bit(0-3) 0 means irq pulse equals 512*internal clock
+       1 means irq pulse equals 1024*internal clock
+       2 means ...
+       7 means irq pulse equals 65536*internal clock
+       8 means irq mutes PA
+       9 means irq mutes PA and DAC output
+     Bit(4) 1 means we invert the interrupt output.
+     Bit(6) 1 means the chip do not detect jack type after button released.
+       0 means the chip detect jack type again after button released.
+    minimum: 0
+    maximum: 0x7f
+    default: 0x45
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      es8326: codec@19 {
+        compatible = "everest,es8326";
+        reg = <0x19>;
+        clocks = <&clks 10>;
+        clock-names = "mclk";
+        #sound-dai-cells = <0>;
+        everest,mic1-src = [22];
+        everest,mic2-src = [44];
+        everest,jack-pol = [0e];
+        everest,interrupt-src = [08];
+        everest,interrupt-clk = [45];
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
index cb9a25165503..998b4c8a7f78 100644
--- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
@@ -51,6 +51,10 @@ Optional properties:
 			  will be in use as default. Otherwise, the big endian
 			  mode will be in use for all the device registers.
 
+   - fsl,asrc-format	: Defines a mutual sample format used by DPCM Back
+			  Ends, which can replace the fsl,asrc-width.
+			  The value is 2 (S16_LE), or 6 (S24_LE).
+
 Example:
 
 asrc: asrc@2034000 {
diff --git a/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
new file mode 100644
index 000000000000..aa4be7170717
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,aud2htx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Audio Subsystem to HDMI RTX Subsystem Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8mp-aud2htx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: bus
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: tx
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    aud2htx: aud2htx@30cb0000 {
+        compatible = "fsl,imx8mp-aud2htx";
+        reg = <0x30cb0000 0x10000>;
+        interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_AUD2HTX_IPG>;
+        clock-names = "bus";
+        dmas = <&sdma2 26 2 0>;
+        dma-names = "tx";
+        power-domains = <&audiomix_pd>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
new file mode 100644
index 000000000000..bdde68a1059c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,easrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Asynchronous Sample Rate Converter (ASRC) Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+  $nodename:
+    pattern: "^easrc@.*"
+
+  compatible:
+    const: fsl,imx8mn-easrc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: mem
+
+  dmas:
+    maxItems: 8
+
+  dma-names:
+    items:
+      - const: ctx0_rx
+      - const: ctx0_tx
+      - const: ctx1_rx
+      - const: ctx1_tx
+      - const: ctx2_rx
+      - const: ctx2_tx
+      - const: ctx3_rx
+      - const: ctx3_tx
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    const: imx/easrc/easrc-imx8mn.bin
+    description: The coefficient table for the filters
+
+  fsl,asrc-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8000
+    maximum: 192000
+    description: Defines a mutual sample rate used by DPCM Back Ends
+
+  fsl,asrc-format:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 6, 10, 32, 36]
+    default: 2
+    description:
+      Defines a mutual sample format used by DPCM Back Ends
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - firmware-name
+  - fsl,asrc-rate
+  - fsl,asrc-format
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+
+    easrc: easrc@300c0000 {
+           compatible = "fsl,imx8mn-easrc";
+           reg = <0x300c0000 0x10000>;
+           interrupts = <0x0 122 0x4>;
+           clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
+           clock-names = "mem";
+           dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+                  <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+                  <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+                  <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+           dma-names = "ctx0_rx", "ctx0_tx",
+                       "ctx1_rx", "ctx1_tx",
+                       "ctx2_rx", "ctx2_tx",
+                       "ctx3_rx", "ctx3_tx";
+           firmware-name = "imx/easrc/easrc-imx8mn.bin";
+           fsl,asrc-rate  = <8000>;
+           fsl,asrc-format = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
index 0e6e2166f76c..0a2480aeecf0 100644
--- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -12,6 +12,7 @@ Required properties:
 			  "fsl,imx35-esai",
 			  "fsl,vf610-esai",
 			  "fsl,imx6ull-esai",
+			  "fsl,imx8qm-esai",
 
   - reg			: Offset and length of the register set for the device.
 
diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.txt b/Documentation/devicetree/bindings/sound/fsl,micfil.txt
deleted file mode 100644
index 53e227b15277..000000000000
--- a/Documentation/devicetree/bindings/sound/fsl,micfil.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-NXP MICFIL Digital Audio Interface (MICFIL).
-
-The MICFIL digital interface provides a 16-bit audio signal from a PDM
-microphone bitstream in a configurable output sampling rate.
-
-Required properties:
-
-  - compatible		: Compatible list, contains "fsl,imx8mm-micfil"
-
-  - reg			: Offset and length of the register set for the device.
-
-  - interrupts		: Contains the micfil interrupts.
-
-  - clocks		: Must contain an entry for each entry in clock-names.
-
-  - clock-names		: Must include the "ipg_clk" for register access and
-			  "ipg_clk_app" for internal micfil clock.
-
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-Example:
-micfil: micfil@30080000 {
-	compatible = "fsl,imx8mm-micfil";
-	reg = <0x0 0x30080000 0x0 0x10000>;
-	interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clk IMX8MM_CLK_PDM_IPG>,
-		 <&clk IMX8MM_CLK_PDM_ROOT>;
-	clock-names = "ipg_clk", "ipg_clk_app";
-	dmas = <&sdma2 24 26 0x80000000>;
-};
diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
new file mode 100644
index 000000000000..64d57758ee67
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,micfil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP MICFIL Digital Audio Interface (MICFIL)
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  The MICFIL digital interface provides a 16-bit or 24-bit audio signal
+  from a PDM microphone bitstream in a configurable output sampling rate.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mm-micfil
+      - fsl,imx8mp-micfil
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Digital Microphone interface interrupt
+      - description: Digital Microphone interface error interrupt
+      - description: voice activity detector event interrupt
+      - description: voice activity detector error interrupt
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+
+  dma-names:
+    items:
+      - const: rx
+
+  clocks:
+    items:
+      - description: The ipg clock for register access
+      - description: internal micfil clock
+      - description: PLL clock source for 8kHz series
+      - description: PLL clock source for 11kHz series
+      - description: External clock 3
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: ipg_clk
+      - const: ipg_clk_app
+      - const: pll8k
+      - const: pll11k
+      - const: clkext3
+    minItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    micfil: audio-controller@30080000 {
+        compatible = "fsl,imx8mm-micfil";
+        reg = <0x30080000 0x10000>;
+        interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+                 <&clk IMX8MM_CLK_PDM_ROOT>;
+        clock-names = "ipg_clk", "ipg_clk_app";
+        dmas = <&sdma2 24 25 0>;
+        dma-names = "rx";
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.txt b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
index 40353fc30255..d66284b8bef2 100644
--- a/Documentation/devicetree/bindings/sound/fsl,mqs.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
@@ -2,7 +2,7 @@ fsl,mqs audio CODEC
 
 Required properties:
   - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs"
-		"fsl,imx8qm-mqs", "fsl,imx8qxp-mqs".
+		"fsl,imx8qm-mqs", "fsl,imx8qxp-mqs", "fsl,imx93-mqs".
   - clocks : A list of phandles + clock-specifiers, one for each entry in
 	     clock-names
   - clock-names : "mclk" - must required.
diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
new file mode 100644
index 000000000000..d370c98a62c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,rpmsg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Audio RPMSG CPU DAI Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  fsl_rpmsg is a virtual audio device. Mapping to real hardware devices
+  are SAI, DMA controlled by Cortex M core. What we see from Linux
+  side is a device which provides audio service by rpmsg channel.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx7ulp-rpmsg-audio
+      - fsl,imx8mn-rpmsg-audio
+      - fsl,imx8mm-rpmsg-audio
+      - fsl,imx8mp-rpmsg-audio
+      - fsl,imx8ulp-rpmsg-audio
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  clocks:
+    items:
+      - description: Peripheral clock for register access
+      - description: Master clock
+      - description: DMA clock for DMA register access
+      - description: Parent clock for multiple of 8kHz sample rates
+      - description: Parent clock for multiple of 11kHz sample rates
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: mclk
+      - const: dma
+      - const: pll8k
+      - const: pll11k
+
+  power-domains:
+    description:
+      List of phandle and PM domain specifier as documented in
+      Documentation/devicetree/bindings/power/power_domain.txt
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+    description:
+      phandle to a node describing reserved memory (System RAM memory)
+      The M core can't access all the DDR memory space on some platform,
+      So reserved a specific memory for dma buffer which M core can
+      access.
+      (see bindings/reserved-memory/reserved-memory.txt)
+
+  audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to a node of audio codec
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+
+  fsl,enable-lpa:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: enable low power audio path.
+
+  fsl,rpmsg-out:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      This is a boolean property. If present, the transmitting function
+      will be enabled.
+
+  fsl,rpmsg-in:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      This is a boolean property. If present, the receiving function
+      will be enabled.
+
+required:
+  - compatible
+  - model
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+
+    rpmsg_audio: rpmsg_audio {
+        compatible = "fsl,imx8mn-rpmsg-audio";
+        model = "wm8524-audio";
+        fsl,enable-lpa;
+        fsl,rpmsg-out;
+        clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
+                 <&clk IMX8MN_CLK_SAI3_ROOT>,
+                 <&clk IMX8MN_CLK_SDMA3_ROOT>,
+                 <&clk IMX8MN_AUDIO_PLL1_OUT>,
+                 <&clk IMX8MN_AUDIO_PLL2_OUT>;
+        clock-names = "ipg", "mclk", "dma", "pll8k", "pll11k";
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
new file mode 100644
index 000000000000..70c4111d59c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
@@ -0,0 +1,216 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,sai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Synchronous Audio Interface (SAI).
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  The SAI is based on I2S module that used communicating with audio codecs,
+  which provides a synchronous audio interface that supports fullduplex
+  serial interfaces with frame synchronization such as I2S, AC97, TDM, and
+  codec/DSP interfaces.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-sai
+          - fsl,imx6sx-sai
+          - fsl,imx6ul-sai
+          - fsl,imx7ulp-sai
+          - fsl,imx8mq-sai
+          - fsl,imx8qm-sai
+          - fsl,imx8ulp-sai
+      - items:
+          - enum:
+              - fsl,imx8mm-sai
+              - fsl,imx8mn-sai
+              - fsl,imx8mp-sai
+          - const: fsl,imx8mq-sai
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: receive and transmit interrupt
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: The ipg clock for register access
+      - description: master clock source 0 (obsoleted)
+      - description: master clock source 1
+      - description: master clock source 2
+      - description: master clock source 3
+      - description: PLL clock source for 8kHz series
+      - description: PLL clock source for 11kHz series
+    minItems: 4
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: bus
+          - const: mclk0
+          - const: mclk1
+          - const: mclk2
+          - const: mclk3
+          - const: pll8k
+          - const: pll11k
+        minItems: 4
+      - items:
+          - const: bus
+          - const: mclk1
+          - const: mclk2
+          - const: mclk3
+          - const: pll8k
+          - const: pll11k
+        minItems: 4
+
+  lsb-first:
+    description: |
+      Configures whether the LSB or the MSB is transmitted
+      first for the fifo data. If this property is absent,
+      the MSB is transmitted first as default, or the LSB
+      is transmitted first.
+    type: boolean
+
+  big-endian:
+    description: |
+      required if all the SAI registers are big-endian rather than little-endian.
+    type: boolean
+
+  fsl,sai-synchronous-rx:
+    description: |
+      SAI will work in the synchronous mode (sync Tx with Rx) which means
+      both the transmitter and the receiver will send and receive data by
+      following receiver's bit clocks and frame sync clocks.
+    type: boolean
+
+  fsl,sai-asynchronous:
+    description: |
+      SAI will work in the asynchronous mode, which means both transmitter
+      and receiver will send and receive data by following their own bit clocks
+      and frame sync clocks separately.
+      If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
+      default synchronous mode (sync Rx with Tx) will be used, which means both
+      transmitter and receiver will send and receive data by following clocks
+      of transmitter.
+    type: boolean
+
+  fsl,dataline:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Configure the dataline. It has 3 value for each configuration
+    maxItems: 16
+    items:
+      items:
+        - description: format Default(0), I2S(1) or PDM(2)
+          enum: [0, 1, 2]
+        - description: dataline mask for 'rx'
+        - description: dataline mask for 'tx'
+
+  fsl,sai-mclk-direction-output:
+    description: SAI will output the SAI MCLK clock.
+    type: boolean
+
+  fsl,shared-interrupt:
+    description: Interrupt is shared with other modules.
+    type: boolean
+
+  "#sound-dai-cells":
+    const: 0
+    description: optional, some dts node didn't add it.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,vf610-sai
+    then:
+      properties:
+        dmas:
+          items:
+            - description: DMA controller phandle and request line for TX
+            - description: DMA controller phandle and request line for RX
+        dma-names:
+          items:
+            - const: tx
+            - const: rx
+    else:
+      properties:
+        dmas:
+          items:
+            - description: DMA controller phandle and request line for RX
+            - description: DMA controller phandle and request line for TX
+        dma-names:
+          items:
+            - const: rx
+            - const: tx
+  - if:
+      required:
+        - fsl,sai-asynchronous
+    then:
+      properties:
+        fsl,sai-synchronous-rx: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+    sai2: sai@40031000 {
+        compatible = "fsl,vf610-sai";
+        reg = <0x40031000 0x1000>;
+        interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_sai2_1>;
+        clocks = <&clks VF610_CLK_PLATFORM_BUS>,
+                 <&clks VF610_CLK_SAI2>,
+                 <&clks 0>, <&clks 0>;
+        clock-names = "bus", "mclk1", "mclk2", "mclk3";
+        dma-names = "tx", "rx";
+        dmas = <&edma0 0 21>,
+               <&edma0 0 20>;
+        big-endian;
+        lsb-first;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    sai1: sai@30010000 {
+        compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+        reg = <0x30010000 0x10000>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+                 <&clk IMX8MM_CLK_DUMMY>,
+                 <&clk IMX8MM_CLK_SAI1_ROOT>,
+                 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+        clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+        dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+        dma-names = "rx", "tx";
+        fsl,dataline = <1 0xff 0xff 2 0xff 0x11>;
+        #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
deleted file mode 100644
index 8b324f82a782..000000000000
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
-
-The Freescale S/PDIF audio block is a stereo transceiver that allows the
-processor to receive and transmit digital audio via an coaxial cable or
-a fibre cable.
-
-Required properties:
-
-  - compatible		: Compatible list, must contain "fsl,imx35-spdif".
-
-  - reg			: Offset and length of the register set for the device.
-
-  - interrupts		: Contains the spdif interrupt.
-
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-  - dma-names		: Two dmas have to be defined, "tx" and "rx".
-
-  - clocks		: Contains an entry for each entry in clock-names.
-
-  - clock-names		: Includes the following entries:
-	"core"		  The core clock of spdif controller.
-	"rxtx<0-7>"	  Clock source list for tx and rx clock.
-			  This clock list should be identical to the source
-			  list connecting to the spdif clock mux in "SPDIF
-			  Transceiver Clock Diagram" of SoC reference manual.
-			  It can also be referred to TxClk_Source bit of
-			  register SPDIF_STC.
-	"spba"		  The spba clock is required when SPDIF is placed as a
-			  bus slave of the Shared Peripheral Bus and when two
-			  or more bus masters (CPU, DMA or DSP) try to access
-			  it. This property is optional depending on the SoC
-			  design.
-
-Optional properties:
-
-   - big-endian		: If this property is absent, the native endian mode
-			  will be in use as default, or the big endian mode
-			  will be in use for all the device registers.
-
-Example:
-
-spdif: spdif@2004000 {
-	compatible = "fsl,imx35-spdif";
-	reg = <0x02004000 0x4000>;
-	interrupts = <0 52 0x04>;
-	dmas = <&sdma 14 18 0>,
-	       <&sdma 15 18 0>;
-	dma-names = "rx", "tx";
-
-	clocks = <&clks 197>, <&clks 3>,
-	       <&clks 197>, <&clks 107>,
-	       <&clks 0>, <&clks 118>,
-	       <&clks 62>, <&clks 139>,
-	       <&clks 0>;
-	clock-names = "core", "rxtx0",
-		"rxtx1", "rxtx2",
-		"rxtx3", "rxtx4",
-		"rxtx5", "rxtx6",
-		"rxtx7";
-
-	big-endian;
-};
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
new file mode 100644
index 000000000000..1d64e8337aa4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  The Freescale S/PDIF audio block is a stereo transceiver that allows the
+  processor to receive and transmit digital audio via an coaxial cable or
+  a fibre cable.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx35-spdif
+      - fsl,vf610-spdif
+      - fsl,imx6sx-spdif
+      - fsl,imx8qm-spdif
+      - fsl,imx8qxp-spdif
+      - fsl,imx8mq-spdif
+      - fsl,imx8mm-spdif
+      - fsl,imx8mn-spdif
+      - fsl,imx8ulp-spdif
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clocks:
+    items:
+      - description: The core clock of spdif controller.
+      - description: Clock for tx0 and rx0.
+      - description: Clock for tx1 and rx1.
+      - description: Clock for tx2 and rx2.
+      - description: Clock for tx3 and rx3.
+      - description: Clock for tx4 and rx4.
+      - description: Clock for tx5 and rx5.
+      - description: Clock for tx6 and rx6.
+      - description: Clock for tx7 and rx7.
+      - description: The spba clock is required when SPDIF is placed as a bus
+          slave of the Shared Peripheral Bus and when two or more bus masters
+          (CPU, DMA or DSP) try to access it. This property is optional depending
+          on the SoC design.
+      - description: PLL clock source for 8kHz series rate, optional.
+      - description: PLL clock source for 11khz series rate, optional.
+    minItems: 9
+
+  clock-names:
+    items:
+      - const: core
+      - const: rxtx0
+      - const: rxtx1
+      - const: rxtx2
+      - const: rxtx3
+      - const: rxtx4
+      - const: rxtx5
+      - const: rxtx6
+      - const: rxtx7
+      - const: spba
+      - const: pll8k
+      - const: pll11k
+    minItems: 9
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      If this property is absent, the native endian mode will be in use
+      as default, or the big endian mode will be in use for all the device
+      registers. Set this flag for HCDs with big endian descriptors and big
+      endian registers.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    spdif@2004000 {
+        compatible = "fsl,imx35-spdif";
+        reg = <0x02004000 0x4000>;
+        interrupts = <0 52 0x04>;
+        dmas = <&sdma 14 18 0>,
+               <&sdma 15 18 0>;
+        dma-names = "rx", "tx";
+        clocks = <&clks 197>, <&clks 3>,
+                 <&clks 197>, <&clks 107>,
+                 <&clks 0>, <&clks 118>,
+                 <&clks 62>, <&clks 139>,
+                 <&clks 0>;
+        clock-names = "core", "rxtx0",
+                      "rxtx1", "rxtx2",
+                      "rxtx3", "rxtx4",
+                      "rxtx5", "rxtx6",
+                      "rxtx7";
+        big-endian;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
new file mode 100644
index 000000000000..223b8ea693dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,xcvr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Audio Transceiver (XCVR) Controller
+
+maintainers:
+  - Viorel Suman <viorel.suman@nxp.com>
+
+description: |
+  NXP XCVR (Audio Transceiver) is a on-chip functional module
+  that allows CPU to receive and transmit digital audio via
+  HDMI2.1 eARC, HDMI1.4 ARC and SPDIF.
+
+properties:
+  $nodename:
+    pattern: "^xcvr@.*"
+
+  compatible:
+    enum:
+      - fsl,imx8mp-xcvr
+
+  reg:
+    items:
+      - description: 20K RAM for code and data
+      - description: registers space
+      - description: RX FIFO address
+      - description: TX FIFO address
+
+  reg-names:
+    items:
+      - const: ram
+      - const: regs
+      - const: rxfifo
+      - const: txfifo
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral clock
+      - description: PHY clock
+      - description: SPBA clock
+      - description: PLL clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: phy
+      - const: spba
+      - const: pll_ipg
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/reset/imx8mp-reset.h>
+
+    xcvr: xcvr@30cc0000 {
+           compatible = "fsl,imx8mp-xcvr";
+           reg = <0x30cc0000 0x800>,
+                 <0x30cc0800 0x400>,
+                 <0x30cc0c00 0x080>,
+                 <0x30cc0e00 0x080>;
+           reg-names = "ram", "regs", "rxfifo", "txfifo";
+           interrupts = <0x0 128 IRQ_TYPE_LEVEL_HIGH>;
+           clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_IPG>,
+                    <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_PHY>,
+                    <&audiomix_clk IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>,
+                    <&audiomix_clk IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>;
+           clock-names = "ipg", "phy", "spba", "pll_ipg";
+           dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>;
+           dma-names = "rx", "tx";
+           resets = <&audiomix_reset 0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
index c60a5732d29c..8b4f4015cfe4 100644
--- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@@ -34,6 +34,18 @@ The compatible list for this generic sound card currently:
 
  "fsl,imx-audio-wm8960"
 
+ "fsl,imx-audio-mqs"
+
+ "fsl,imx-audio-wm8524"
+
+ "fsl,imx-audio-tlv320aic32x4"
+
+ "fsl,imx-audio-tlv320aic31xx"
+
+ "fsl,imx-audio-si476x"
+
+ "fsl,imx-audio-wm8958"
+
 Required properties:
 
   - compatible		: Contains one of entries in the compatible list.
@@ -44,6 +56,11 @@ Required properties:
 
   - audio-codec		: The phandle of an audio codec
 
+Optional properties:
+
+  - audio-asrc		: The phandle of ASRC. It can be absent if there's no
+			  need to add ASRC support via DPCM.
+
   - audio-routing	: A list of the connections between audio components.
 			  Each entry is a pair of strings, the first being the
 			  connection's sink, the second being the connection's
@@ -60,10 +77,14 @@ Required properties:
 			        coexisting in order to support the old bindings
 				of wm8962 and sgtl5000.
 
-Optional properties:
-
-  - audio-asrc		: The phandle of ASRC. It can be absent if there's no
-			  need to add ASRC support via DPCM.
+  - hp-det-gpio		: The GPIO that detect headphones are plugged in
+  - mic-det-gpio	: The GPIO that detect microphones are plugged in
+  - bitclock-master	: Indicates dai-link bit clock master; for details see simple-card.yaml.
+  - frame-master	: Indicates dai-link frame master; for details see simple-card.yaml.
+  - dai-format		: audio format, for details see simple-card.yaml.
+  - frame-inversion	: dai-link uses frame clock inversion, for details see simple-card.yaml.
+  - bitclock-inversion	: dai-link uses bit clock inversion, for details see simple-card.yaml.
+  - mclk-id		: main clock id, specific for each card configuration.
 
 Optional unless SSI is selected as a CPU DAI:
 
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
deleted file mode 100644
index 0dc83cc4a236..000000000000
--- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Freescale Synchronous Audio Interface (SAI).
-
-The SAI is based on I2S module that used communicating with audio codecs,
-which provides a synchronous audio interface that supports fullduplex
-serial interfaces with frame synchronization such as I2S, AC97, TDM, and
-codec/DSP interfaces.
-
-Required properties:
-
-  - compatible		: Compatible list, contains "fsl,vf610-sai",
-			  "fsl,imx6sx-sai", "fsl,imx6ul-sai",
-			  "fsl,imx7ulp-sai", "fsl,imx8mq-sai" or
-			  "fsl,imx8qm-sai".
-
-  - reg			: Offset and length of the register set for the device.
-
-  - clocks		: Must contain an entry for each entry in clock-names.
-
-  - clock-names		: Must include the "bus" for register access and
-			  "mclk1", "mclk2", "mclk3" for bit clock and frame
-			  clock providing.
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-  - dma-names		: Two dmas have to be defined, "tx" and "rx".
-
-  - pinctrl-names	: Must contain a "default" entry.
-
-  - pinctrl-NNN		: One property must exist for each entry in
-			  pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
-			  for details of the property values.
-
-  - lsb-first		: Configures whether the LSB or the MSB is transmitted
-			  first for the fifo data. If this property is absent,
-			  the MSB is transmitted first as default, or the LSB
-			  is transmitted first.
-
-  - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
-			  that SAI will work in the synchronous mode (sync Tx
-			  with Rx) which means both the transmitter and the
-			  receiver will send and receive data by following
-			  receiver's bit clocks and frame sync clocks.
-
-  - fsl,sai-asynchronous: This is a boolean property. If present, indicating
-			  that SAI will work in the asynchronous mode, which
-			  means both transmitter and receiver will send and
-			  receive data by following their own bit clocks and
-			  frame sync clocks separately.
-
-Optional properties:
-
-  - big-endian		: Boolean property, required if all the SAI
-			  registers are big-endian rather than little-endian.
-
-Optional properties (for mx6ul):
-
-  - fsl,sai-mclk-direction-output: This is a boolean property. If present,
-			 indicates that SAI will output the SAI MCLK clock.
-
-Note:
-- If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
-  default synchronous mode (sync Rx with Tx) will be used, which means both
-  transmitter and receiver will send and receive data by following clocks
-  of transmitter.
-- fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive.
-
-Example:
-sai2: sai@40031000 {
-	      compatible = "fsl,vf610-sai";
-	      reg = <0x40031000 0x1000>;
-	      pinctrl-names = "default";
-	      pinctrl-0 = <&pinctrl_sai2_1>;
-	      clocks = <&clks VF610_CLK_PLATFORM_BUS>,
-		     <&clks VF610_CLK_SAI2>,
-		     <&clks 0>, <&clks 0>;
-	      clock-names = "bus", "mclk1", "mclk2", "mclk3";
-	      dma-names = "tx", "rx";
-	      dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
-		   <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
-	      big-endian;
-	      lsb-first;
-};
diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
deleted file mode 100644
index 8ca52dcc5572..000000000000
--- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Audio codec controlled by ChromeOS EC
-
-Google's ChromeOS EC codec is a digital mic codec provided by the
-Embedded Controller (EC) and is controlled via a host-command interface.
-
-An EC codec node should only be found as a sub-node of the EC node (see
-Documentation/devicetree/bindings/mfd/cros-ec.txt).
-
-Required properties:
-- compatible: Must contain "google,cros-ec-codec"
-- #sound-dai-cells: Should be 1. The cell specifies number of DAIs.
-
-Optional properties:
-- reg: Pysical base address and length of shared memory region from EC.
-       It contains 3 unsigned 32-bit integer.  The first 2 integers
-       combine to become an unsigned 64-bit physical address.  The last
-       one integer is length of the shared memory.
-- memory-region: Shared memory region to EC.  A "shared-dma-pool".  See
-                 ../reserved-memory/reserved-memory.txt for details.
-
-Example:
-
-{
-	...
-
-	reserved_mem: reserved_mem {
-		compatible = "shared-dma-pool";
-		reg = <0 0x52800000 0 0x100000>;
-		no-map;
-	};
-}
-
-cros-ec@0 {
-	compatible = "google,cros-ec-spi";
-
-	...
-
-	cros_ec_codec: ec-codec {
-		compatible = "google,cros-ec-codec";
-		#sound-dai-cells = <1>;
-		reg = <0x0 0x10500000 0x80000>;
-		memory-region = <&reserved_mem>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
new file mode 100644
index 000000000000..c3e9f3485449
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,cros-ec-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio codec controlled by ChromeOS EC
+
+maintainers:
+  - Cheng-Yi Chiang <cychiang@chromium.org>
+  - Tzung-Bi Shih <tzungbi@google.com>
+
+description: |
+  Google's ChromeOS EC codec is a digital mic codec provided by the
+  Embedded Controller (EC) and is controlled via a host-command
+  interface.  An EC codec node should only be found inside the "codecs"
+  subnode of a cros-ec node.
+  (see Documentation/devicetree/bindings/mfd/google,cros-ec.yaml).
+
+properties:
+  compatible:
+    const: google,cros-ec-codec
+
+  "#sound-dai-cells":
+    const: 1
+
+  reg:
+    items:
+      - description: |
+          Physical base address and length of shared memory region from EC.
+          It contains 3 unsigned 32-bit integer. The first 2 integers
+          combine to become an unsigned 64-bit physical address.
+          The last one integer is the length of the shared memory.
+
+  memory-region:
+    maxItems: 1
+    description: |
+      Shared memory region to EC.  A "shared-dma-pool".
+      See ../reserved-memory/reserved-memory.txt for details.
+
+required:
+  - compatible
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reserved_mem: reserved-mem@52800000 {
+        compatible = "shared-dma-pool";
+        reg = <0x52800000 0x100000>;
+        no-map;
+    };
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+
+            codecs {
+                #address-cells = <2>;
+                #size-cells = <1>;
+
+                cros_ec_codec: ec-codec@10500000 {
+                    compatible = "google,cros-ec-codec";
+                    #sound-dai-cells = <1>;
+                    reg = <0x0 0x10500000 0x80000>;
+                    memory-region = <&reserved_mem>;
+                };
+
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
new file mode 100644
index 000000000000..67ccddd44489
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,sc7180-trogdor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google SC7180-Trogdor ASoC sound card driver
+
+maintainers:
+  - Rohit kumar <rohitkr@codeaurora.org>
+  - Cheng-Yi Chiang <cychiang@chromium.org>
+
+description:
+  This binding describes the SC7180 sound card which uses LPASS for audio.
+
+properties:
+  compatible:
+    enum:
+      - google,sc7180-trogdor
+      - google,sc7180-coachz
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  dmic-gpios:
+    maxItems: 1
+    description: GPIO for switching between DMICs
+
+patternProperties:
+  "^dai-link(@[0-9])?$":
+    description:
+      Each subnode represents a dai link. Subnodes of each dai links would be
+      cpu/codec dais.
+
+    type: object
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name.
+        $ref: /schemas/types.yaml#/definitions/string
+        maxItems: 1
+
+      reg:
+        maxItems: 1
+        description: dai link address.
+
+      cpu:
+        description: Holds subnode which indicates cpu dai.
+        type: object
+        additionalProperties: false
+
+        properties:
+          sound-dai:
+            maxItems: 1
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        additionalProperties: false
+
+        properties:
+          sound-dai:
+            maxItems: 1
+
+    required:
+      - link-name
+      - cpu
+      - codec
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - model
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+
+  - |
+    sound {
+        compatible = "google,sc7180-trogdor";
+        model = "sc7180-rt5682-max98357a-2mic";
+
+        audio-routing =
+                    "Headphone Jack", "HPOL",
+                    "Headphone Jack", "HPOR";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dmic-gpios = <&tlmm 86 0>;
+
+        dai-link@0 {
+            link-name = "MultiMedia0";
+            reg = <0>;
+            cpu {
+                sound-dai = <&lpass_cpu 0>;
+            };
+
+            codec {
+                sound-dai = <&alc5682 0>;
+            };
+        };
+
+        dai-link@1 {
+            link-name = "MultiMedia1";
+            reg = <1>;
+            cpu {
+                sound-dai = <&lpass_cpu 1>;
+            };
+
+            codec {
+                sound-dai = <&max98357a>;
+            };
+        };
+
+        dai-link@2 {
+            link-name = "MultiMedia2";
+            reg = <2>;
+            cpu {
+                sound-dai = <&lpass_hdmi 0>;
+            };
+
+            codec {
+                sound-dai = <&msm_dp>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
new file mode 100644
index 000000000000..869b40363af8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,sc7280-herobrine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google SC7280-Herobrine ASoC sound card driver
+
+maintainers:
+  - Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
+  - Judy Hsiao <judyhsiao@chromium.org>
+
+description:
+  This binding describes the SC7280 sound card which uses LPASS for audio.
+
+properties:
+  compatible:
+    enum:
+      - google,sc7280-herobrine
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^dai-link@[0-9a-f]$":
+    description:
+      Each subnode represents a dai link. Subnodes of each dai links would be
+      cpu/codec dais.
+
+    type: object
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name.
+        $ref: /schemas/types.yaml#/definitions/string
+        maxItems: 1
+
+      reg:
+        maxItems: 1
+        description: dai link address.
+
+      cpu:
+        description: Holds subnode which indicates cpu dai.
+        type: object
+        properties:
+          sound-dai: true
+
+        required:
+          - sound-dai
+
+        additionalProperties: false
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        properties:
+          sound-dai: true
+
+        required:
+          - sound-dai
+
+        additionalProperties: false
+
+    required:
+      - link-name
+      - cpu
+      - codec
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - model
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+
+  - |
+    #include <dt-bindings/sound/qcom,lpass.h>
+    sound {
+        compatible = "google,sc7280-herobrine";
+        model = "sc7280-wcd938x-max98360a-4dmic";
+
+        audio-routing =
+            "IN1_HPHL", "HPHL_OUT",
+            "IN2_HPHR", "HPHR_OUT",
+            "AMIC1", "MIC BIAS1",
+            "AMIC2", "MIC BIAS2",
+            "VA DMIC0", "MIC BIAS3",
+            "VA DMIC1", "MIC BIAS3",
+            "VA DMIC2", "MIC BIAS4",
+            "VA DMIC3", "MIC BIAS4",
+            "TX SWR_ADC0", "ADC1_OUTPUT",
+            "TX SWR_ADC1", "ADC2_OUTPUT",
+            "TX SWR_ADC2", "ADC3_OUTPUT",
+            "TX SWR_DMIC0", "DMIC1_OUTPUT",
+            "TX SWR_DMIC1", "DMIC2_OUTPUT",
+            "TX SWR_DMIC2", "DMIC3_OUTPUT",
+            "TX SWR_DMIC3", "DMIC4_OUTPUT";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dai-link@0 {
+            link-name = "WCD Playback";
+            reg = <LPASS_CDC_DMA_RX0>;
+            cpu {
+                sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+            };
+
+            codec {
+                sound-dai = <&wcd938x 0>, <&swr0 0>, <&rxmacro 0>;
+            };
+        };
+        dai-link@1 {
+            link-name = "WCD Capture";
+            reg = <LPASS_CDC_DMA_TX3>;
+            cpu {
+                sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+            };
+
+            codec {
+                sound-dai = <&wcd938x 1>, <&swr1 0>, <&txmacro 0>;
+            };
+        };
+
+        dai-link@2 {
+            link-name = "MI2S Playback";
+            reg = <MI2S_SECONDARY>;
+            cpu {
+                sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+            };
+
+            codec {
+                sound-dai = <&max98360a>;
+            };
+        };
+
+        dai-link@3 {
+            link-name = "DMIC Capture";
+            reg = <LPASS_CDC_DMA_VA_TX0>;
+            cpu {
+                sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+            };
+
+            codec {
+                sound-dai = <&vamacro 0>;
+            };
+        };
+
+        dai-link@5 {
+            link-name = "DP Playback";
+            reg = <LPASS_DP_RX>;
+            cpu {
+                sound-dai = <&lpass_cpu LPASS_DP_RX>;
+            };
+
+            codec {
+                sound-dai = <&mdss_dp>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/hdmi.txt b/Documentation/devicetree/bindings/sound/hdmi.txt
deleted file mode 100644
index 56407c30e954..000000000000
--- a/Documentation/devicetree/bindings/sound/hdmi.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Device-Tree bindings for dummy HDMI codec
-
-Required properties:
-	- compatible: should be "linux,hdmi-audio".
-
-CODEC output pins:
-  * TX
-
-CODEC input pins:
-  * RX
-
-Example node:
-
-	hdmi_audio: hdmi_audio@0 {
-		compatible = "linux,hdmi-audio";
-	};
diff --git a/Documentation/devicetree/bindings/sound/ics43432.txt b/Documentation/devicetree/bindings/sound/ics43432.txt
index b02e3a6c0fef..e6f05f2f6c4e 100644
--- a/Documentation/devicetree/bindings/sound/ics43432.txt
+++ b/Documentation/devicetree/bindings/sound/ics43432.txt
@@ -1,4 +1,4 @@
-Invensense ICS-43432 MEMS microphone with I2S output.
+Invensense ICS-43432-compatible MEMS microphone with I2S output.
 
 There are no software configuration options for this device, indeed, the only
 host connection is the I2S interface. Apart from requirements on clock
@@ -8,7 +8,9 @@ contain audio data. A hardware pin determines if the device outputs data
 on the left or right channel of the I2S frame.
 
 Required properties:
-  - compatible : Must be "invensense,ics43432"
+  - compatible: should be one of the following.
+     "invensense,ics43432": For the Invensense ICS43432
+     "cui,cmm-4030d-261": For the CUI CMM-4030D-261-I2S-TR
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml
new file mode 100644
index 000000000000..b6f5d486600e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/imx-audio-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX audio sound card.
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx-audio-card
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source. Valid names could be power supplies,
+      MicBias of codec and the jacks on the board.
+
+patternProperties:
+  ".*-dai-link$":
+    description:
+      Each subnode represents a dai link. Subnodes of each dai links would be
+      cpu/codec dais.
+
+    type: object
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name.
+        $ref: /schemas/types.yaml#/definitions/string
+        maxItems: 1
+
+      format:
+        description: audio format.
+        items:
+          enum:
+            - i2s
+            - dsp_b
+
+      dai-tdm-slot-num:
+        description: see tdm-slot.txt.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dai-tdm-slot-width:
+        description: see tdm-slot.txt.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      cpu:
+        description: Holds subnode which indicates cpu dai.
+        type: object
+        additionalProperties: false
+        properties:
+          sound-dai:
+            maxItems: 1
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        additionalProperties: false
+        properties:
+          sound-dai:
+            minItems: 1
+            maxItems: 2
+
+      fsl,mclk-equal-bclk:
+        description: Indicates mclk can be equal to bclk, especially for sai interface
+        $ref: /schemas/types.yaml#/definitions/flag
+
+    required:
+      - link-name
+      - cpu
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - model
+
+additionalProperties: false
+
+examples:
+  - |
+    sound-ak4458 {
+        compatible = "fsl,imx-audio-card";
+        model = "ak4458-audio";
+        pri-dai-link {
+            link-name = "akcodec";
+            format = "i2s";
+            fsl,mclk-equal-bclk;
+            cpu {
+                 sound-dai = <&sai1>;
+            };
+            codec {
+                 sound-dai = <&ak4458_1>, <&ak4458_2>;
+            };
+        };
+        fe-dai-link {
+            link-name = "HiFi-ASRC-FE";
+            format = "i2s";
+            cpu {
+                sound-dai = <&easrc>;
+            };
+        };
+        be-dai-link {
+            link-name = "HiFi-ASRC-BE";
+            format = "dsp_b";
+            dai-tdm-slot-num = <8>;
+            dai-tdm-slot-width = <32>;
+            fsl,mclk-equal-bclk;
+            cpu {
+                sound-dai = <&sai1>;
+            };
+            codec {
+                sound-dai = <&ak4458_1>, <&ak4458_2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml
new file mode 100644
index 000000000000..e7e7bb65c366
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/imx-audio-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX audio complex with HDMI
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx-audio-hdmi
+      - fsl,imx-audio-sii902x
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  audio-cpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of an CPU DAI controller
+
+  hdmi-out:
+    type: boolean
+    description: |
+      This is a boolean property. If present, the transmitting function
+      of HDMI will be enabled, indicating there's a physical HDMI out
+      connector or jack on the board or it's connecting to some other IP
+      block, such as an HDMI encoder or display-controller.
+
+  hdmi-in:
+    type: boolean
+    description: |
+      This is a boolean property. If present, the receiving function of
+      HDMI will be enabled, indicating there is a physical HDMI in
+      connector/jack on the board.
+
+required:
+  - compatible
+  - model
+  - audio-cpu
+
+additionalProperties: false
+
+examples:
+  - |
+    sound-hdmi {
+        compatible = "fsl,imx-audio-hdmi";
+        model = "audio-hdmi";
+        audio-cpu = <&aud2htx>;
+        hdmi-out;
+    };
diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt
deleted file mode 100644
index 2db4dcbee1b9..000000000000
--- a/Documentation/devicetree/bindings/sound/imx-audmux.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Freescale Digital Audio Mux (AUDMUX) device
-
-Required properties:
-
-  - compatible		: "fsl,imx21-audmux" for AUDMUX version firstly used
-			  on i.MX21, or "fsl,imx31-audmux" for the version
-			  firstly used on i.MX31.
-
-  - reg			: Should contain AUDMUX registers location and length.
-
-An initial configuration can be setup using child nodes.
-
-Required properties of optional child nodes:
-
-  - fsl,audmux-port	: Integer of the audmux port that is configured by this
-			  child node.
-
-  - fsl,port-config	: List of configuration options for the specific port.
-			  For imx31-audmux and above, it is a list of tuples
-			  <ptcr pdcr>. For imx21-audmux it is a list of pcr
-			  values.
-
-Example:
-
-audmux@21d8000 {
-	compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
-	reg = <0x021d8000 0x4000>;
-};
diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.yaml b/Documentation/devicetree/bindings/sound/imx-audmux.yaml
new file mode 100644
index 000000000000..dab45c310670
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audmux.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/imx-audmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Digital Audio Mux device
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx27-audmux
+          - const: fsl,imx21-audmux
+      - items:
+          - enum:
+              - fsl,imx25-audmux
+              - fsl,imx35-audmux
+              - fsl,imx50-audmux
+              - fsl,imx51-audmux
+              - fsl,imx53-audmux
+              - fsl,imx6q-audmux
+              - fsl,imx6sl-audmux
+              - fsl,imx6sll-audmux
+              - fsl,imx6sx-audmux
+          - const: fsl,imx31-audmux
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: audmux
+
+patternProperties:
+  "^mux-[0-9a-z]*$":
+    type: object
+    properties:
+      fsl,audmux-port:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Integer of the audmux port that is configured by this child node
+
+      fsl,port-config:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: |
+          List of configuration options for the specific port.
+          For imx31-audmux and above, it is a list of tuples ptcr pdcr.
+          For imx21-audmux it is a list of pcr values.
+
+    required:
+      - fsl,audmux-port
+      - fsl,port-config
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    audmux@21d8000 {
+        compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+        reg = <0x021d8000 0x4000>;
+    };
+  - |
+    audmux@10016000 {
+        compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
+        reg = <0x10016000 0x1000>;
+        clocks = <&clks 1>;
+        clock-names = "audmux";
+
+        mux-ssi0 {
+            fsl,audmux-port = <0>;
+            fsl,port-config = <0xcb205000>;
+        };
+
+        mux-pins4 {
+            fsl,audmux-port = <2>;
+            fsl,port-config = <0x00001000>;
+        };
+    };
+  - |
+    #include <dt-bindings/sound/fsl-imx-audmux.h>
+    audmux@21d8000 {
+        compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+        reg = <0x021d8000 0x4000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_audmux>;
+
+        mux-ssi1 {
+            fsl,audmux-port = <0>;
+            fsl,port-config = <
+                IMX_AUDMUX_V2_PTCR_SYN		0
+                IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+                IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+                IMX_AUDMUX_V2_PTCR_TFSDIR	0
+                IMX_AUDMUX_V2_PTCR_TCLKDIR      IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+              >;
+        };
+
+        mux-pins3 {
+            fsl,audmux-port = <2>;
+            fsl,port-config = <
+                IMX_AUDMUX_V2_PTCR_SYN          IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+                0                               IMX_AUDMUX_V2_PDCR_TXRXEN
+              >;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
new file mode 100644
index 000000000000..d607325f2f15
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ingenic,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs AC97 / I2S Controller (AIC) DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: '^audio-controller@'
+
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-i2s
+          - ingenic,jz4760-i2s
+          - ingenic,jz4770-i2s
+          - ingenic,jz4780-i2s
+      - items:
+          - const: ingenic,jz4725b-i2s
+          - const: ingenic,jz4740-i2s
+
+  '#sound-dai-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AIC clock
+      - description: I2S clock
+      - description: EXT clock
+      - description: PLL/2 clock
+
+  clock-names:
+    items:
+      - const: aic
+      - const: i2s
+      - const: ext
+      - const: pll half
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for I2S RX
+      - description: DMA controller phandle and request line for I2S TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - '#sound-dai-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+    aic: audio-controller@10020000 {
+      compatible = "ingenic,jz4740-i2s";
+      reg = <0x10020000 0x38>;
+
+      #sound-dai-cells = <0>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <18>;
+
+      clocks = <&cgu JZ4740_CLK_AIC>,
+               <&cgu JZ4740_CLK_I2S>,
+               <&cgu JZ4740_CLK_EXT>,
+               <&cgu JZ4740_CLK_PLL_HALF>;
+      clock-names = "aic", "i2s", "ext", "pll half";
+
+      dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+      dma-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/sound/ingenic,codec.yaml b/Documentation/devicetree/bindings/sound/ingenic,codec.yaml
index eb4be86464bb..48aae54dd643 100644
--- a/Documentation/devicetree/bindings/sound/ingenic,codec.yaml
+++ b/Documentation/devicetree/bindings/sound/ingenic,codec.yaml
@@ -15,9 +15,14 @@ properties:
 
   compatible:
     oneOf:
-      - const: ingenic,jz4770-codec
-      - const: ingenic,jz4725b-codec
-      - const: ingenic,jz4740-codec
+      - enum:
+          - ingenic,jz4770-codec
+          - ingenic,jz4760-codec
+          - ingenic,jz4725b-codec
+          - ingenic,jz4740-codec
+      - items:
+          - const: ingenic,jz4760b-codec
+          - const: ingenic,jz4760-codec
 
   reg:
     maxItems: 1
@@ -43,7 +48,7 @@ required:
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4740-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
     codec: audio-codec@10020080 {
       compatible = "ingenic,jz4740-codec";
       reg = <0x10020080 0x8>;
diff --git a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt b/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt
deleted file mode 100644
index b623d50004fb..000000000000
--- a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Ingenic JZ4740 I2S controller
-
-Required properties:
-- compatible : "ingenic,jz4740-i2s" or "ingenic,jz4780-i2s"
-- reg : I2S registers location and length
-- clocks : AIC and I2S PLL clock specifiers.
-- clock-names: "aic" and "i2s"
-- dmas: DMA controller phandle and DMA request line for I2S Tx and Rx channels
-- dma-names: Must be "tx" and "rx"
-
-Example:
-
-i2s: i2s@10020000 {
-	compatible = "ingenic,jz4740-i2s";
-	reg = <0x10020000 0x94>;
-
-	clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2SPLL>;
-	clock-names = "aic", "i2s";
-
-	dmas = <&dma 2>, <&dma 3>;
-	dma-names = "tx", "rx";
-
-};
diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
new file mode 100644
index 000000000000..b2603f611af9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/intel,keembay-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel KeemBay I2S
+
+maintainers:
+  - Sia, Jee Heng <jee.heng.sia@intel.com>
+
+description: |
+ Intel KeemBay I2S
+
+properties:
+  compatible:
+    enum:
+      - intel,keembay-i2s
+      - intel,keembay-tdm
+      - intel,keembay-hdmi-i2s
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    items:
+      - description: I2S registers
+      - description: I2S gen configuration
+
+  reg-names:
+    items:
+      - const: i2s-regs
+      - const: i2s_gen_cfg
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: osc
+      - const: apb_clk
+
+  dmas:
+    items:
+      - description: DMA TX channel
+      - description: DMA RX channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/interrupt-controller/irq.h>
+     #define KEEM_BAY_PSS_AUX_I2S3
+     #define KEEM_BAY_PSS_I2S3
+     i2s3: i2s@20140000 {
+         compatible = "intel,keembay-i2s";
+         #sound-dai-cells = <0>;
+         reg = <0x20140000 0x200>, /* I2S registers */
+               <0x202a00a4 0x4>; /* I2S gen configuration */
+         reg-names = "i2s-regs", "i2s_gen_cfg";
+         interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+         clock-names = "osc", "apb_clk";
+         clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>;
+         dmas = <&axi_dma0 29>, <&axi_dma0 33>;
+         dma-names = "tx", "rx";
+     };
diff --git a/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml b/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml
new file mode 100644
index 000000000000..b97e0fcbdba3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/linux,bt-sco.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bluetooth SCO Audio Codec
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+properties:
+  '#sound-dai-cells':
+    enum:
+      - 0
+
+      # For Wideband PCM
+      - 1
+
+  compatible:
+    enum:
+      - delta,dfbmcs320
+      - linux,bt-sco
+
+required:
+  - '#sound-dai-cells'
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    codec {
+        #sound-dai-cells = <0>;
+        compatible = "linux,bt-sco";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml b/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml
new file mode 100644
index 000000000000..808f6d2736c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/linux,spdif-dit.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dummy SPDIF Transmitter
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  compatible:
+    const: linux,spdif-dit
+
+  "#sound-dai-cells":
+    const: 0
+
+  sound-name-prefix: true
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    spdif-out {
+        #sound-dai-cells = <0>;
+        compatible = "linux,spdif-dit";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/madera.txt b/Documentation/devicetree/bindings/sound/madera.txt
deleted file mode 100644
index 5e669ce552f4..000000000000
--- a/Documentation/devicetree/bindings/sound/madera.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-Cirrus Logic Madera class audio codecs
-
-This describes audio configuration bindings for these codecs.
-
-See also the core bindings for the parent MFD driver:
-See Documentation/devicetree/bindings/mfd/madera.txt
-
-and defines for values used in these bindings:
-include/dt-bindings/sound/madera.h
-
-These properties are all contained in the parent MFD node.
-
-Optional properties:
-  - cirrus,dmic-ref : Indicates how the MICBIAS pins have been externally
-    connected to DMICs on each input, one cell per input.
-    <IN1 IN2 IN3 ...>
-    A value of 0 indicates MICVDD and is the default, other values depend on the
-    codec:
-    For CS47L35 one of the CS47L35_DMIC_REF_xxx values
-    For all other codecs one of the MADERA_DMIC_REF_xxx values
-    Also see the datasheet for a description of the INn_DMIC_SUP field.
-
-  - cirrus,inmode : A list of input mode settings for each input. A maximum of
-    16 cells, with four cells per input in the order INnAL, INnAR INnBL INnBR.
-    For non-muxed inputs the first two cells for that input set the mode for
-    the left and right channel and the second two cells must be 0.
-    For muxed inputs the first two cells for that input set the mode of the
-    left and right A inputs and the second two cells set the mode of the left
-    and right B inputs.
-    Valid mode values are one of the MADERA_INMODE_xxx. If the array is shorter
-    than the number of inputs the unspecified inputs default to
-    MADERA_INMODE_DIFF.
-
-  - cirrus,out-mono : Mono bit for each output, maximum of six cells if the
-    array is shorter outputs will be set to stereo.
-
-  - cirrus,max-channels-clocked : Maximum number of channels that I2S clocks
-    will be generated for. Useful when clock master for systems where the I2S
-    bus has multiple data lines.
-    One cell for each AIF, use a value of zero for AIFs that should be handled
-    normally.
-
-  - cirrus,pdm-fmt : PDM speaker data format, must contain 2 cells
-    (OUT5 and OUT6). See the PDM_SPKn_FMT field in the datasheet for a
-    description of this value.
-    The second cell is ignored for codecs that do not have OUT6.
-
-  - cirrus,pdm-mute : PDM mute format, must contain 2 cells
-    (OUT5 and OUT6). See the PDM_SPKn_CTRL_1 register in the datasheet for a
-    description of this value.
-    The second cell is ignored for codecs that do not have OUT6.
-
-Example:
-
-cs47l35@0 {
-	compatible = "cirrus,cs47l35";
-
-	cirrus,dmic-ref = <0 0 CS47L35_DMIC_REF_MICBIAS1B 0>;
-	cirrus,inmode = <
-		MADERA_INMODE_DMIC MADERA_INMODE_DMIC /* IN1A digital */
-		MADERA_INMODE_SE   MADERA_INMODE_SE   /* IN1B single-ended */
-		MADERA_INMODE_DIFF MADERA_INMODE_DIFF /* IN2 differential */
-		0 0 	/* not used on this codec */
-	>;
-	cirrus,out-mono = <0 0 0 0 0 0>;
-	cirrus,max-channels-clocked = <2 0 0>;
-};
diff --git a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml
new file mode 100644
index 000000000000..81f266d66ec5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/marvell,mmp-sspa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvel SSPA Digital Audio Interface Bindings
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  $nodename:
+    pattern: "^audio-controller(@.*)?$"
+
+  compatible:
+    const: marvell,mmp-sspa
+
+  reg:
+    items:
+      - description: RX block
+      - description: TX block
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Clock for the Audio block
+      - description: I2S bit clock
+
+  clock-names:
+    items:
+      - const: audio
+      - const: bitclk
+
+  power-domains:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        type: object
+
+        properties:
+          dai-format:
+            const: i2s
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2.h>
+
+    audio-controller@d42a0c00 {
+      compatible = "marvell,mmp-sspa";
+      reg = <0xd42a0c00 0x30>,
+            <0xd42a0c80 0x30>;
+      interrupts = <2>;
+      clock-names = "audio", "bitclk";
+      clocks = <&soc_clocks 127>,
+               <&audio_clk 1>;
+      #sound-dai-cells = <0>;
+      dmas = <&adma0 0>, <&adma0 1>;
+      dma-names = "tx", "rx";
+      port {
+        endpoint {
+          remote-endpoint = <&rt5631_0>;
+          dai-format = "i2s";
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
index 7e1bbd5c27fd..39d640294c62 100644
--- a/Documentation/devicetree/bindings/sound/max98090.txt
+++ b/Documentation/devicetree/bindings/sound/max98090.txt
@@ -55,5 +55,5 @@ audio-codec@10 {
 	compatible = "maxim,max98090";
 	reg = <0x10>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/sound/max98357a.txt b/Documentation/devicetree/bindings/sound/max98357a.txt
index 4bce14ce806f..75db84d06240 100644
--- a/Documentation/devicetree/bindings/sound/max98357a.txt
+++ b/Documentation/devicetree/bindings/sound/max98357a.txt
@@ -1,9 +1,10 @@
-Maxim MAX98357A audio DAC
+Maxim MAX98357A/MAX98360A audio DAC
 
-This node models the Maxim MAX98357A DAC.
+This node models the Maxim MAX98357A/MAX98360A DAC.
 
 Required properties:
-- compatible   : "maxim,max98357a"
+- compatible   : "maxim,max98357a" for MAX98357A.
+                 "maxim,max98360a" for MAX98360A.
 
 Optional properties:
 - sdmode-gpios : GPIO specifier for the chip's SD_MODE pin.
@@ -20,3 +21,8 @@ max98357a {
 	compatible = "maxim,max98357a";
 	sdmode-gpios = <&qcom_pinmux 25 0>;
 };
+
+max98360a {
+	compatible = "maxim,max98360a";
+	sdmode-gpios = <&qcom_pinmux 25 0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/max9892x.txt b/Documentation/devicetree/bindings/sound/max9892x.txt
index f6171591ddc6..98cb9ba5b328 100644
--- a/Documentation/devicetree/bindings/sound/max9892x.txt
+++ b/Documentation/devicetree/bindings/sound/max9892x.txt
@@ -30,6 +30,9 @@ Required properties:
 
   - reg : the I2C address of the device for I2C
 
+Optional properties:
+  - reset-gpios : GPIO to reset the device
+
 Example:
 
 codec: max98927@3a {
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml
new file mode 100644
index 000000000000..deaa6886c42f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98390.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98390 Speaker Amplifier with Integrated Dynamic Speaker Management
+
+maintainers:
+  - Steve Lee <steves.lee@maximintegrated.com>
+
+properties:
+  compatible:
+    const: maxim,max98390
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  maxim,temperature_calib:
+    description: The calculated temperature data was measured while doing the calibration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 65535
+
+  maxim,r0_calib:
+    description: This is r0 calibration data which was measured in factory mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8388607
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      max98390: amplifier@38 {
+        compatible = "maxim,max98390";
+        reg = <0x38>;
+        maxim,temperature_calib = <1024>;
+        maxim,r0_calib = <100232>;
+        reset-gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98520.yaml b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml
new file mode 100644
index 000000000000..3f88c7d61e34
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98520.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98520 Speaker Amplifier Driver
+
+maintainers:
+  - George Song <george.song@maximintegrated.com>
+
+properties:
+  compatible:
+    const: maxim,max98520
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      max98520: amplifier@38 {
+        compatible = "maxim,max98520";
+        reg = <0x38>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
new file mode 100644
index 000000000000..0481315cb5f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mchp,i2s-mcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip I2S Multi-Channel Controller
+
+maintainers:
+  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+  The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and
+  supports a Time Division Multiplexed (TDM) interface with external
+  multi-channel audio codecs. It consists of a receiver, a transmitter and a
+  common clock generator that can be enabled separately to provide Adapter,
+  Client or Controller modes with receiver and/or transmitter active.
+  On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S
+  multi-channel is supported by using multiple data pins, output and
+  input, without TDM.
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - microchip,sam9x60-i2smcc
+      - microchip,sama7g5-i2smcc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+      - description: Generic Clock (Optional). Should be set mostly when Master
+          Mode is required.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+    minItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  microchip,tdm-data-pair:
+    description:
+      Represents the DIN/DOUT pair pins that are used to receive/send
+      TDM data. It is optional and it is only needed if the controller
+      uses the TDM mode.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [0, 1, 2, 3]
+    default: 0
+
+if:
+  properties:
+    compatible:
+      const: microchip,sam9x60-i2smcc
+then:
+  properties:
+    microchip,tdm-data-pair: false
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2s@f001c000 {
+        #sound-dai-cells = <0>;
+        compatible = "microchip,sam9x60-i2smcc";
+        reg = <0xf001c000 0x100>;
+        interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                       AT91_XDMAC_DT_PERID(36))>,
+               <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                       AT91_XDMAC_DT_PERID(37))>;
+        dma-names = "tx", "rx";
+        clocks = <&i2s_clk>, <&i2s_gclk>;
+        clock-names = "pclk", "gclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2s_default>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
new file mode 100644
index 000000000000..70a47c6823b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mchp,spdifrx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip S/PDIF Rx Controller
+
+maintainers:
+  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+  The Microchip Sony/Philips Digital Interface Receiver is a serial port
+  compliant with the IEC-60958 standard.
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    const: microchip,sama7g5-spdifrx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+      - description: Generic Clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    description: RX DMA Channel
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spdifrx: spdifrx@e1614000 {
+        #sound-dai-cells = <0>;
+        compatible = "microchip,sama7g5-spdifrx";
+        reg = <0xe1614000 0x4000>;
+        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
+        dma-names = "rx";
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
+        clock-names = "pclk", "gclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
new file mode 100644
index 000000000000..d218e4ab9a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mchp,spdiftx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip S/PDIF Tx Controller
+
+maintainers:
+  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+  The Microchip Sony/Philips Digital Interface Transmitter is a serial port
+  compliant with the IEC-60958 standard.
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    const: microchip,sama7g5-spdiftx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+      - description: Generic Clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    description: TX DMA Channel
+    maxItems: 1
+
+  dma-names:
+    const: tx
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spdiftx@e1618000 {
+        #sound-dai-cells = <0>;
+        compatible = "microchip,sama7g5-spdiftx";
+        reg = <0xe1618000 0x4000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
+        dma-names = "tx";
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
+        clock-names = "pclk", "gclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_spdiftx_default>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt b/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt
deleted file mode 100644
index 91ec83a6faed..000000000000
--- a/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Microchip I2S Multi-Channel Controller
-
-Required properties:
-- compatible:     Should be "microchip,sam9x60-i2smcc".
-- reg:            Should be the physical base address of the controller and the
-                  length of memory mapped region.
-- interrupts:     Should contain the interrupt for the controller.
-- dmas:           Should be one per channel name listed in the dma-names property,
-                  as described in atmel-dma.txt and dma.txt files.
-- dma-names:      Identifier string for each DMA request line in the dmas property.
-		  Two dmas have to be defined, "tx" and "rx".
-- clocks:         Must contain an entry for each entry in clock-names.
-                  Please refer to clock-bindings.txt.
-- clock-names:    Should be one of each entry matching the clocks phandles list:
-                  - "pclk" (peripheral clock) Required.
-                  - "gclk" (generated clock) Optional (1).
-
-Optional properties:
-- pinctrl-0:      Should specify pin control groups used for this controller.
-- princtrl-names: Should contain only one value - "default".
-
-
-(1) : Only the peripheral clock is required. The generated clock is optional
-      and should be set mostly when Master Mode is required.
-
-Example:
-
-	i2s@f001c000 {
-		compatible = "microchip,sam9x60-i2smcc";
-		reg = <0xf001c000 0x100>;
-		interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(36))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(37))>;
-		dma-names = "tx", "rx";
-		clocks = <&i2s_clk>, <&i2s_gclk>;
-		clock-names = "pclk", "gclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2s_default>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/microchip,pdmc.yaml b/Documentation/devicetree/bindings/sound/microchip,pdmc.yaml
new file mode 100644
index 000000000000..04414eb4ada9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/microchip,pdmc.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/microchip,pdmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Pulse Density Microphone Controller
+
+maintainers:
+  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+  The Microchip Pulse Density Microphone Controller (PDMC) interfaces up to 4
+  digital microphones having Pulse Density Modulated (PDM) outputs.
+
+properties:
+  compatible:
+    const: microchip,sama7g5-pdmc
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+      - description: Generic Clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    description: RX DMA Channel
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  microchip,mic-pos:
+    description: |
+      Position of PDM microphones on the DS line and the sampling edge (rising
+      or falling) of the CLK line. A microphone is represented as a pair of DS
+      line and the sampling edge. The first microphone is mapped to channel 0,
+      the second to channel 1, etc.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: value for DS line
+        - description: value for sampling edge
+      anyOf:
+        - enum:
+            - [0, 0]
+            - [0, 1]
+            - [1, 0]
+            - [1, 1]
+    minItems: 1
+    maxItems: 4
+    uniqueItems: true
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - microchip,mic-pos
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/sound/microchip,pdmc.h>
+
+    pdmc: sound@e1608000 {
+        compatible = "microchip,sama7g5-pdmc";
+        reg = <0xe1608000 0x4000>;
+        #sound-dai-cells = <0>;
+        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>;
+        dma-names = "rx";
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>;
+        clock-names = "pclk", "gclk";
+        microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>,
+                            <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>,
+                            <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>,
+                            <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/mt6358.txt b/Documentation/devicetree/bindings/sound/mt6358.txt
index 5465730013a1..fbe9e55c68f5 100644
--- a/Documentation/devicetree/bindings/sound/mt6358.txt
+++ b/Documentation/devicetree/bindings/sound/mt6358.txt
@@ -7,12 +7,20 @@ Must be a child node of PMIC wrapper.
 
 Required properties:
 
-- compatible : "mediatek,mt6358-sound".
+- compatible - "string" - One of:
+    "mediatek,mt6358-sound"
+    "mediatek,mt6366-sound"
 - Avdd-supply : power source of AVDD
 
+Optional properties:
+- mediatek,dmic-mode : Indicates how many data pins are used to transmit two
+	channels of PDM signal. 0 means two wires, 1 means one wire. Default
+	value is 0.
+
 Example:
 
 mt6358_snd {
 	compatible = "mediatek,mt6358-sound";
 	Avdd-supply = <&mt6358_vaud28_reg>;
+	mediatek,dmic-mode = <0>;
 };
diff --git a/Documentation/devicetree/bindings/sound/mt6359.yaml b/Documentation/devicetree/bindings/sound/mt6359.yaml
new file mode 100644
index 000000000000..23d411fc4200
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt6359.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt6359.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6359 Codec
+
+maintainers:
+  - Eason Yen <eason.yen@mediatek.com>
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+  - Shane Chien <shane.chien@mediatek.com>
+
+description: |
+  The communication between MT6359 and SoC is through Mediatek PMIC wrapper.
+  For more detail, please visit Mediatek PMIC wrapper documentation.
+  Must be a child node of PMIC wrapper.
+
+properties:
+  mediatek,dmic-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Indicates how many data pins are used to transmit two channels of PDM
+      signal. 0 means two wires, 1 means one wire. Default value is 0.
+    enum:
+      - 0 # one wire
+      - 1 # two wires
+
+  mediatek,mic-type-0:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the type of mic type connected to adc0
+
+    enum:
+      - 0 # IDLE - mic in turn-off status
+      - 1 # ACC - analog mic with alternating coupling
+      - 2 # DMIC - digital mic
+      - 3 # DCC - analog mic with direct couping
+      - 4 # DCC_ECM_DIFF - analog electret condenser mic with differential mode
+      - 5 # DCC_ECM_SINGLE - analog electret condenser mic with single mode
+
+  mediatek,mic-type-1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the type of mic type connected to adc1
+
+  mediatek,mic-type-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the type of mic type connected to adc2
+
+additionalProperties: false
+
+examples:
+  - |
+    mt6359codec: mt6359codec {
+      mediatek,dmic-mode = <0>;
+      mediatek,mic-type-0 = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt b/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt
index 92ac86f83822..f276dfc74b46 100644
--- a/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt
+++ b/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt
@@ -1,15 +1,21 @@
-MT8183 with MT6358, DA7219 and MAX98357 CODECS
+MT8183 with MT6358, DA7219, MAX98357, and RT1015 CODECS
 
 Required properties:
-- compatible : "mediatek,mt8183_da7219_max98357"
+- compatible : "mediatek,mt8183_da7219_max98357" for MAX98357A codec
+               "mediatek,mt8183_da7219_rt1015" for RT1015 codec
+               "mediatek,mt8183_da7219_rt1015p" for RT1015P codec
 - mediatek,headset-codec: the phandles of da7219 codecs
 - mediatek,platform: the phandle of MT8183 ASoC platform
 
+Optional properties:
+- mediatek,hdmi-codec: the phandles of HDMI codec
+
 Example:
 
 	sound {
 		compatible = "mediatek,mt8183_da7219_max98357";
 		mediatek,headset-codec = <&da7219>;
+		mediatek,hdmi-codec = <&it6505dptx>;
 		mediatek,platform = <&afe>;
 	};
 
diff --git a/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
index decaa013a07e..ecd46ed8eb98 100644
--- a/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
+++ b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
@@ -1,13 +1,17 @@
-MT8183 with MT6358, TS3A227 and MAX98357 CODECS
+MT8183 with MT6358, TS3A227, MAX98357, and RT1015 CODECS
 
 Required properties:
-- compatible : "mediatek,mt8183_mt6358_ts3a227_max98357"
+- compatible : "mediatek,mt8183_mt6358_ts3a227_max98357" for MAX98357A codec
+               "mediatek,mt8183_mt6358_ts3a227_max98357b" for MAX98357B codec
+               "mediatek,mt8183_mt6358_ts3a227_rt1015" for RT1015 codec
+               "mediatek,mt8183_mt6358_ts3a227_rt1015p" for RT1015P codec
 - mediatek,platform: the phandle of MT8183 ASoC platform
 
 Optional properties:
 - mediatek,headset-codec: the phandles of ts3a227 codecs
 - mediatek,ec-codec: the phandle of EC codecs.
                      See google,cros-ec-codec.txt for more details.
+- mediatek,hdmi-codec: the phandles of HDMI codec
 
 Example:
 
@@ -15,6 +19,7 @@ Example:
 		compatible = "mediatek,mt8183_mt6358_ts3a227_max98357";
 		mediatek,headset-codec = <&ts3a227>;
 		mediatek,ec-codec = <&ec_codec>;
+		mediatek,hdmi-codec = <&it6505dptx>;
 		mediatek,platform = <&afe>;
 	};
 
diff --git a/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml
new file mode 100644
index 000000000000..88f82d096443
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8186-afe-pcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AFE PCM controller for mt8186
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt8186-sound
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: audiosys
+
+  mediatek,apmixedsys:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek apmixedsys controller
+
+  mediatek,infracfg:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek infracfg controller
+
+  mediatek,topckgen:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek topckgen controller
+
+  clocks:
+    items:
+      - description: audio infra sys clock
+      - description: audio infra 26M clock
+      - description: audio top mux
+      - description: audio intbus mux
+      - description: mainpll 136.5M clock
+      - description: faud1 mux
+      - description: apll1 clock
+      - description: faud2 mux
+      - description: apll2 clock
+      - description: audio engen1 mux
+      - description: apll1_d8 22.5792M clock
+      - description: audio engen2 mux
+      - description: apll2_d8 24.576M clock
+      - description: i2s0 mclk mux
+      - description: i2s1 mclk mux
+      - description: i2s2 mclk mux
+      - description: i2s4 mclk mux
+      - description: tdm mclk mux
+      - description: i2s0_mck divider
+      - description: i2s1_mck divider
+      - description: i2s2_mck divider
+      - description: i2s4_mck divider
+      - description: tdm_mck divider
+      - description: audio hires mux
+      - description: 26M clock
+
+  clock-names:
+    items:
+      - const: aud_infra_clk
+      - const: mtkaif_26m_clk
+      - const: top_mux_audio
+      - const: top_mux_audio_int
+      - const: top_mainpll_d2_d4
+      - const: top_mux_aud_1
+      - const: top_apll1_ck
+      - const: top_mux_aud_2
+      - const: top_apll2_ck
+      - const: top_mux_aud_eng1
+      - const: top_apll1_d8
+      - const: top_mux_aud_eng2
+      - const: top_apll2_d8
+      - const: top_i2s0_m_sel
+      - const: top_i2s1_m_sel
+      - const: top_i2s2_m_sel
+      - const: top_i2s4_m_sel
+      - const: top_tdm_m_sel
+      - const: top_apll12_div0
+      - const: top_apll12_div1
+      - const: top_apll12_div2
+      - const: top_apll12_div4
+      - const: top_apll12_div_tdm
+      - const: top_mux_audio_h
+      - const: top_clk26m_clk
+
+required:
+  - compatible
+  - interrupts
+  - resets
+  - reset-names
+  - mediatek,apmixedsys
+  - mediatek,infracfg
+  - mediatek,topckgen
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    afe: mt8186-afe-pcm@11210000 {
+        compatible = "mediatek,mt8186-sound";
+        reg = <0x11210000 0x2000>;
+        interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&watchdog 17>; //MT8186_TOPRGU_AUDIO_SW_RST
+        reset-names = "audiosys";
+        mediatek,apmixedsys = <&apmixedsys>;
+        mediatek,infracfg = <&infracfg>;
+        mediatek,topckgen = <&topckgen>;
+        clocks = <&infracfg_ao 44>, //CLK_INFRA_AO_AUDIO
+                 <&infracfg_ao 54>, //CLK_INFRA_AO_AUDIO_26M_BCLK
+                 <&topckgen 15>, //CLK_TOP_AUDIO
+                 <&topckgen 16>, //CLK_TOP_AUD_INTBUS
+                 <&topckgen 70>, //CLK_TOP_MAINPLL_D2_D4
+                 <&topckgen 17>, //CLK_TOP_AUD_1
+                 <&apmixedsys 12>, //CLK_APMIXED_APLL1
+                 <&topckgen 18>, //CLK_TOP_AUD_2
+                 <&apmixedsys 13>, //CLK_APMIXED_APLL2
+                 <&topckgen 19>, //CLK_TOP_AUD_ENGEN1
+                 <&topckgen 101>, //CLK_TOP_APLL1_D8
+                 <&topckgen 20>, //CLK_TOP_AUD_ENGEN2
+                 <&topckgen 104>, //CLK_TOP_APLL2_D8
+                 <&topckgen 63>, //CLK_TOP_APLL_I2S0_MCK_SEL
+                 <&topckgen 64>, //CLK_TOP_APLL_I2S1_MCK_SEL
+                 <&topckgen 65>, //CLK_TOP_APLL_I2S2_MCK_SEL
+                 <&topckgen 66>, //CLK_TOP_APLL_I2S4_MCK_SEL
+                 <&topckgen 67>, //CLK_TOP_APLL_TDMOUT_MCK_SEL
+                 <&topckgen 131>, //CLK_TOP_APLL12_CK_DIV0
+                 <&topckgen 132>, //CLK_TOP_APLL12_CK_DIV1
+                 <&topckgen 133>, //CLK_TOP_APLL12_CK_DIV2
+                 <&topckgen 134>, //CLK_TOP_APLL12_CK_DIV4
+                 <&topckgen 135>, //CLK_TOP_APLL12_CK_DIV_TDMOUT_M
+                 <&topckgen 44>, //CLK_TOP_AUDIO_H
+                 <&clk26m>;
+        clock-names = "aud_infra_clk",
+                      "mtkaif_26m_clk",
+                      "top_mux_audio",
+                      "top_mux_audio_int",
+                      "top_mainpll_d2_d4",
+                      "top_mux_aud_1",
+                      "top_apll1_ck",
+                      "top_mux_aud_2",
+                      "top_apll2_ck",
+                      "top_mux_aud_eng1",
+                      "top_apll1_d8",
+                      "top_mux_aud_eng2",
+                      "top_apll2_d8",
+                      "top_i2s0_m_sel",
+                      "top_i2s1_m_sel",
+                      "top_i2s2_m_sel",
+                      "top_i2s4_m_sel",
+                      "top_tdm_m_sel",
+                      "top_apll12_div0",
+                      "top_apll12_div1",
+                      "top_apll12_div2",
+                      "top_apll12_div4",
+                      "top_apll12_div_tdm",
+                      "top_mux_audio_h",
+                      "top_clk26m_clk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml
new file mode 100644
index 000000000000..d427f7f623db
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8186-mt6366-da7219-max98357.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8186 with MT6366, DA7219 and MAX98357 ASoC sound card driver
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+
+description:
+  This binding describes the MT8186 sound card.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8186-mt6366-da7219-max98357-sound
+
+  mediatek,platform:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8186 ASoC platform.
+
+  headset-codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+    required:
+      - sound-dai
+
+  playback-codecs:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        items:
+          - description: phandle of dp codec
+          - description: phandle of l channel speaker codec
+          - description: phandle of r channel speaker codec
+        minItems: 2
+    required:
+      - sound-dai
+
+  mediatek,adsp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8186 ADSP platform.
+
+  mediatek,dai-link:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      A list of the desired dai-links in the sound card. Each entry is a
+      name defined in the machine driver.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+  - headset-codec
+  - playback-codecs
+
+examples:
+  - |
+
+    sound: mt8186-sound {
+        compatible = "mediatek,mt8186-mt6366-da7219-max98357-sound";
+        mediatek,platform = <&afe>;
+        pinctrl-names = "aud_clk_mosi_off",
+                        "aud_clk_mosi_on";
+        pinctrl-0 = <&aud_clk_mosi_off>;
+        pinctrl-1 = <&aud_clk_mosi_on>;
+
+        headset-codec {
+            sound-dai = <&da7219>;
+        };
+
+        playback-codecs {
+            sound-dai = <&anx_bridge_dp>,
+                        <&max98357a>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
new file mode 100644
index 000000000000..4fc5b045d3cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8186-mt6366-rt1019-rt5682s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8186 with MT6366, RT1019 and RT5682S ASoC sound card driver
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+
+description:
+  This binding describes the MT8186 sound card.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8186-mt6366-rt1019-rt5682s-sound
+
+  mediatek,platform:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8186 ASoC platform.
+
+  headset-codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+    required:
+      - sound-dai
+
+  playback-codecs:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        items:
+          - description: phandle of dp codec
+          - description: phandle of l channel speaker codec
+          - description: phandle of r channel speaker codec
+        minItems: 2
+    required:
+      - sound-dai
+
+  mediatek,adsp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8186 ADSP platform.
+
+  mediatek,dai-link:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      A list of the desired dai-links in the sound card. Each entry is a
+      name defined in the machine driver.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+  - headset-codec
+  - playback-codecs
+
+examples:
+  - |
+
+    sound: mt8186-sound {
+        compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
+        mediatek,platform = <&afe>;
+        pinctrl-names = "aud_clk_mosi_off",
+                        "aud_clk_mosi_on";
+        pinctrl-0 = <&aud_clk_mosi_off>;
+        pinctrl-1 = <&aud_clk_mosi_on>;
+
+        headset-codec {
+            sound-dai = <&rt5682s>;
+        };
+
+        playback-codecs {
+             sound-dai = <&it6505dptx>,
+                         <&rt1019p>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
new file mode 100644
index 000000000000..7a25bc9b8060
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8192-afe-pcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AFE PCM controller for mt8192
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+  - Shane Chien <shane.chien@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt8192-audio
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: audiosys
+
+  mediatek,apmixedsys:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek apmixedsys controller
+
+  mediatek,infracfg:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek infracfg controller
+
+  mediatek,topckgen:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek topckgen controller
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AFE clock
+      - description: ADDA DAC clock
+      - description: ADDA DAC pre-distortion clock
+      - description: audio infra sys clock
+      - description: audio infra 26M clock
+
+  clock-names:
+    items:
+      - const: aud_afe_clk
+      - const: aud_dac_clk
+      - const: aud_dac_predis_clk
+      - const: aud_infra_clk
+      - const: aud_infra_26m_clk
+
+required:
+  - compatible
+  - interrupts
+  - resets
+  - reset-names
+  - mediatek,apmixedsys
+  - mediatek,infracfg
+  - mediatek,topckgen
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8192-power.h>
+    #include <dt-bindings/reset/mt8192-resets.h>
+
+    afe: mt8192-afe-pcm {
+        compatible = "mediatek,mt8192-audio";
+        interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&watchdog MT8192_TOPRGU_AUDIO_SW_RST>;
+        reset-names = "audiosys";
+        mediatek,apmixedsys = <&apmixedsys>;
+        mediatek,infracfg = <&infracfg>;
+        mediatek,topckgen = <&topckgen>;
+        power-domains = <&scpsys MT8192_POWER_DOMAIN_AUDIO>;
+        clocks = <&audsys CLK_AUD_AFE>,
+                 <&audsys CLK_AUD_DAC>,
+                 <&audsys CLK_AUD_DAC_PREDIS>,
+                 <&infracfg CLK_INFRA_AUDIO>,
+                 <&infracfg CLK_INFRA_AUDIO_26M_B>;
+        clock-names = "aud_afe_clk",
+                      "aud_dac_clk",
+                      "aud_dac_predis_clk",
+                      "aud_infra_clk",
+                      "aud_infra_26m_clk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
new file mode 100644
index 000000000000..478be7e3fa29
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8192-mt6359-rt1015-rt5682.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8192 with MT6359, RT1015 and RT5682 ASoC sound card driver
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+  - Shane Chien <shane.chien@mediatek.com>
+
+description:
+  This binding describes the MT8192 sound card.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8192_mt6359_rt1015_rt5682
+      - mediatek,mt8192_mt6359_rt1015p_rt5682
+      - mediatek,mt8192_mt6359_rt1015p_rt5682s
+
+  mediatek,platform:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8192 ASoC platform.
+
+  mediatek,hdmi-codec:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of HDMI codec.
+
+  headset-codec:
+    type: object
+    additionalProperties: false
+
+    properties:
+      sound-dai:
+        $ref: /schemas/types.yaml#/definitions/phandle
+    required:
+      - sound-dai
+
+  speaker-codecs:
+    type: object
+    additionalProperties: false
+
+    properties:
+      sound-dai:
+        minItems: 1
+        maxItems: 2
+        items:
+          maxItems: 1
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+    required:
+      - sound-dai
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+  - headset-codec
+  - speaker-codecs
+
+examples:
+  - |
+
+    sound: mt8192-sound {
+        compatible = "mediatek,mt8192_mt6359_rt1015_rt5682";
+        mediatek,platform = <&afe>;
+        mediatek,hdmi-codec = <&anx_bridge_dp>;
+        pinctrl-names = "aud_clk_mosi_off",
+                        "aud_clk_mosi_on";
+        pinctrl-0 = <&aud_clk_mosi_off>;
+        pinctrl-1 = <&aud_clk_mosi_on>;
+
+        headset-codec {
+            sound-dai = <&rt5682>;
+        };
+
+        speaker-codecs {
+            sound-dai = <&rt1015_l>,
+                        <&rt1015_r>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml
new file mode 100644
index 000000000000..4452a4070eff
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8195-afe-pcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AFE PCM controller for mt8195
+
+maintainers:
+  - Trevor Wu <trevor.wu@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt8195-audio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: audiosys
+
+  memory-region:
+    maxItems: 1
+    description: |
+      Shared memory region for AFE memif.  A "shared-dma-pool".
+      See ../reserved-memory/reserved-memory.txt for details.
+
+  mediatek,topckgen:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek topckgen controller
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 26M clock
+      - description: audio pll1 clock
+      - description: audio pll2 clock
+      - description: clock divider for i2si1_mck
+      - description: clock divider for i2si2_mck
+      - description: clock divider for i2so1_mck
+      - description: clock divider for i2so2_mck
+      - description: clock divider for dptx_mck
+      - description: a1sys hoping clock
+      - description: audio intbus clock
+      - description: audio hires clock
+      - description: audio local bus clock
+      - description: mux for dptx_mck
+      - description: mux for i2so1_mck
+      - description: mux for i2so2_mck
+      - description: mux for i2si1_mck
+      - description: mux for i2si2_mck
+      - description: audio infra 26M clock
+      - description: infra bus clock
+
+  clock-names:
+    items:
+      - const: clk26m
+      - const: apll1_ck
+      - const: apll2_ck
+      - const: apll12_div0
+      - const: apll12_div1
+      - const: apll12_div2
+      - const: apll12_div3
+      - const: apll12_div9
+      - const: a1sys_hp_sel
+      - const: aud_intbus_sel
+      - const: audio_h_sel
+      - const: audio_local_bus_sel
+      - const: dptx_m_sel
+      - const: i2so1_m_sel
+      - const: i2so2_m_sel
+      - const: i2si1_m_sel
+      - const: i2si2_m_sel
+      - const: infra_ao_audio_26m_b
+      - const: scp_adsp_audiodsp
+
+  mediatek,etdm-in1-chn-disabled:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 24
+    description: Specify which input channel should be disabled.
+
+  mediatek,etdm-in2-chn-disabled:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 16
+    description: Specify which input channel should be disabled.
+
+patternProperties:
+  "^mediatek,etdm-in[1-2]-mclk-always-on-rate-hz$":
+    description: Specify etdm in mclk output rate for always on case.
+
+  "^mediatek,etdm-out[1-3]-mclk-always-on-rate-hz$":
+    description: Specify etdm out mclk output rate for always on case.
+
+  "^mediatek,etdm-in[1-2]-multi-pin-mode$":
+    type: boolean
+    description: if present, the etdm data mode is I2S.
+
+  "^mediatek,etdm-out[1-3]-multi-pin-mode$":
+    type: boolean
+    description: if present, the etdm data mode is I2S.
+
+  "^mediatek,etdm-in[1-2]-cowork-source$":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      etdm modules can share the same external clock pin. Specify
+      which etdm clock source is required by this etdm in moudule.
+    enum:
+      - 0 # etdm1_in
+      - 1 # etdm2_in
+      - 2 # etdm1_out
+      - 3 # etdm2_out
+
+  "^mediatek,etdm-out[1-2]-cowork-source$":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      etdm modules can share the same external clock pin. Specify
+      which etdm clock source is required by this etdm out moudule.
+    enum:
+      - 0 # etdm1_in
+      - 1 # etdm2_in
+      - 2 # etdm1_out
+      - 3 # etdm2_out
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - reset-names
+  - mediatek,topckgen
+  - power-domains
+  - clocks
+  - clock-names
+  - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    afe: mt8195-afe-pcm@10890000 {
+        compatible = "mediatek,mt8195-audio";
+        reg = <0x10890000 0x10000>;
+        interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
+        resets = <&watchdog 14>;
+        reset-names = "audiosys";
+        mediatek,topckgen = <&topckgen>;
+        power-domains = <&spm 7>; //MT8195_POWER_DOMAIN_AUDIO
+        memory-region = <&snd_dma_mem_reserved>;
+        clocks = <&clk26m>,
+                 <&topckgen 163>, //CLK_TOP_APLL1
+                 <&topckgen 166>, //CLK_TOP_APLL2
+                 <&topckgen 233>, //CLK_TOP_APLL12_DIV0
+                 <&topckgen 234>, //CLK_TOP_APLL12_DIV1
+                 <&topckgen 235>, //CLK_TOP_APLL12_DIV2
+                 <&topckgen 236>, //CLK_TOP_APLL12_DIV3
+                 <&topckgen 238>, //CLK_TOP_APLL12_DIV9
+                 <&topckgen 100>, //CLK_TOP_A1SYS_HP_SEL
+                 <&topckgen 33>, //CLK_TOP_AUD_INTBUS_SEL
+                 <&topckgen 34>, //CLK_TOP_AUDIO_H_SEL
+                 <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS_SEL
+                 <&topckgen 98>, //CLK_TOP_DPTX_M_SEL
+                 <&topckgen 94>, //CLK_TOP_I2SO1_M_SEL
+                 <&topckgen 95>, //CLK_TOP_I2SO2_M_SEL
+                 <&topckgen 96>, //CLK_TOP_I2SI1_M_SEL
+                 <&topckgen 97>, //CLK_TOP_I2SI2_M_SEL
+                 <&infracfg_ao 50>, //CLK_INFRA_AO_AUDIO_26M_B
+                 <&scp_adsp 0>; //CLK_SCP_ADSP_AUDIODSP
+        clock-names = "clk26m",
+                      "apll1_ck",
+                      "apll2_ck",
+                      "apll12_div0",
+                      "apll12_div1",
+                      "apll12_div2",
+                      "apll12_div3",
+                      "apll12_div9",
+                      "a1sys_hp_sel",
+                      "aud_intbus_sel",
+                      "audio_h_sel",
+                      "audio_local_bus_sel",
+                      "dptx_m_sel",
+                      "i2so1_m_sel",
+                      "i2so2_m_sel",
+                      "i2si1_m_sel",
+                      "i2si2_m_sel",
+                      "infra_ao_audio_26m_b",
+                      "scp_adsp_audiodsp";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml
new file mode 100644
index 000000000000..ad3447ff8b2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8195-mt6359.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8195 ASoC sound card driver
+
+maintainers:
+  - Trevor Wu <trevor.wu@mediatek.com>
+
+description:
+  This binding describes the MT8195 sound card.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195_mt6359_rt1019_rt5682
+      - mediatek,mt8195_mt6359_rt1011_rt5682
+      - mediatek,mt8195_mt6359_max98390_rt5682
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  mediatek,platform:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 ASoC platform.
+
+  mediatek,dptx-codec:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 Display Port Tx codec node.
+
+  mediatek,hdmi-codec:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 HDMI codec node.
+
+  mediatek,adsp:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 ADSP platform.
+
+  mediatek,dai-link:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      A list of the desired dai-links in the sound card. Each entry is a
+      name defined in the machine driver.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+
+examples:
+  - |
+
+    sound: mt8195-sound {
+        compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+        mediatek,platform = <&afe>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&aud_pins_default>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/name-prefix.txt b/Documentation/devicetree/bindings/sound/name-prefix.txt
deleted file mode 100644
index 645775908657..000000000000
--- a/Documentation/devicetree/bindings/sound/name-prefix.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Name prefix:
-
-Card implementing the routing property define the connection between
-audio components as list of string pair. Component using the same
-sink/source names may use the name prefix property to prepend the
-name of their sinks/sources with the provided string.
-
-Optional name prefix property:
-- sound-name-prefix : string using as prefix for the sink/source names of
-		      the component.
-
-Example: Two instances of the same component.
-
-amp0: analog-amplifier@0 {
-	compatible = "simple-audio-amplifier";
-	enable-gpios = <&gpio GPIOH_3 0>;
-	sound-name-prefix = "FRONT";
-};
-
-amp1: analog-amplifier@1 {
-	compatible = "simple-audio-amplifier";
-	enable-gpios = <&gpio GPIOH_4 0>;
-	sound-name-prefix = "BACK";
-};
diff --git a/Documentation/devicetree/bindings/sound/name-prefix.yaml b/Documentation/devicetree/bindings/sound/name-prefix.yaml
new file mode 100644
index 000000000000..2fe57f87ac52
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/name-prefix.yaml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/name-prefix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Component sound name prefix
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  sound-name-prefix:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Card implementing the routing property define the connection between
+      audio components as list of string pair. Component using the same
+      sink/source names may use this property to prepend the name of their
+      sinks/sources with the provided string.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/nau8315.txt b/Documentation/devicetree/bindings/sound/nau8315.txt
new file mode 100644
index 000000000000..6eaec46f384c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nau8315.txt
@@ -0,0 +1,18 @@
+Nuvoton NAU8315 Mono Class-D Amplifier
+
+Required properties:
+- compatible   : "nuvoton,nau8315"
+
+Optional properties:
+- enable-gpios : GPIO specifier for the chip's device enable input(EN) pin.
+        If this option is not specified then driver does not manage
+        the pin state (e.g. chip is always on).
+
+Example:
+
+#include <dt-bindings/gpio/gpio.h>
+
+nau8315 {
+	compatible = "nuvoton,nau8315";
+	enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/sound/nau8810.txt b/Documentation/devicetree/bindings/sound/nau8810.txt
index 05830e477acd..7deaa452b200 100644
--- a/Documentation/devicetree/bindings/sound/nau8810.txt
+++ b/Documentation/devicetree/bindings/sound/nau8810.txt
@@ -1,10 +1,11 @@
-NAU8810 audio CODEC
+NAU8810/NAU8812/NAU8814 audio CODEC
 
 This device supports I2C only.
 
 Required properties:
 
-  - compatible : "nuvoton,nau8810"
+  - compatible : One of "nuvoton,nau8810" or "nuvoton,nau8812" or
+	"nuvoton,nau8814"
 
   - reg : the I2C address of the device.
 
diff --git a/Documentation/devicetree/bindings/sound/nau8821.txt b/Documentation/devicetree/bindings/sound/nau8821.txt
new file mode 100644
index 000000000000..7c84e7c7327a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nau8821.txt
@@ -0,0 +1,55 @@
+Nuvoton NAU88L21 audio codec
+
+This device supports I2C only.
+
+Required properties:
+  - compatible : Must be "nuvoton,nau8821"
+
+  - reg : the I2C address of the device. This is either 0x1B (CSB=0) or 0x54 (CSB=1).
+
+Optional properties:
+  - nuvoton,jkdet-enable: Enable jack detection via JKDET pin.
+  - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled,
+      otherwise pin in high impedance state.
+  - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down.
+  - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low.
+
+  - nuvoton,vref-impedance: VREF Impedance selection
+      0 - Open
+      1 - 25 kOhm
+      2 - 125 kOhm
+      3 - 2.5 kOhm
+
+  - nuvoton,micbias-voltage: Micbias voltage level.
+      0 - VDDA
+      1 - VDDA
+      2 - VDDA * 1.1
+      3 - VDDA * 1.2
+      4 - VDDA * 1.3
+      5 - VDDA * 1.4
+      6 - VDDA * 1.53
+      7 - VDDA * 1.53
+
+  - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
+  - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
+
+  - nuvoton,dmic-clk-threshold: the ADC threshold of DMIC clock.
+  - nuvoton,key_enable: Headset button detection switch.
+
+Example:
+
+  headset: nau8821@1b {
+      compatible = "nuvoton,nau8821";
+      reg = <0x1b>;
+      interrupt-parent = <&gpio>;
+      interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+      nuvoton,jkdet-enable;
+      nuvoton,jkdet-pull-enable;
+      nuvoton,jkdet-pull-up;
+      nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+      nuvoton,vref-impedance = <2>;
+      nuvoton,micbias-voltage = <6>;
+      nuvoton,jack-insert-debounce = <7>;
+      nuvoton,jack-eject-debounce = <7>;
+      nuvoton,dmic-clk-threshold = 3072000;
+  };
diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt
index d16d96839bcb..cb861aca8d40 100644
--- a/Documentation/devicetree/bindings/sound/nau8825.txt
+++ b/Documentation/devicetree/bindings/sound/nau8825.txt
@@ -71,6 +71,9 @@ Optional properties:
 
   - nuvoton,crosstalk-enable: make crosstalk function enable if set.
 
+  - nuvoton,adcout-drive-strong: make the drive strength of ADCOUT IO PIN strong if set.
+      Otherwise, the drive keeps normal strength.
+
   - clocks: list of phandle and clock specifier pairs according to common clock bindings for the
       clocks described in clock-names
   - clock-names: should include "mclk" for the MCLK master clock
@@ -101,5 +104,5 @@ Example:
       nuvoton,crosstalk-enable;
 
       clock-names = "mclk";
-      clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
+      clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_2>;
   };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
deleted file mode 100644
index 57f40f93453e..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-NVIDIA Tegra audio complex
-
-Required properties:
-- compatible : "nvidia,tegra-audio-alc5632"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the ALC5632's pins as documented in the binding for the device
-  and:
-
-  * Headset Stereophone
-  * Int Spk
-  * Headset Mic
-  * Digital Mic
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller
-- nvidia,audio-codec : The phandle of the ALC5632 audio codec
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-alc5632-paz00",
-				 "nvidia,tegra-audio-alc5632";
-
-	nvidia,model = "Compal PAZ00";
-
-	nvidia,audio-routing =
-				"Int Spk", "SPK_OUTP",
-				"Int Spk", "SPK_OUTN",
-				"Headset Mic","MICBIAS1",
-				"MIC1_N", "Headset Mic",
-				"MIC1_P", "Headset Mic",
-				"Headset Stereophone", "HP_OUT_R",
-				"Headset Stereophone", "HP_OUT_L";
-
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&alc5632>;
-
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.yaml
new file mode 100644
index 000000000000..7ef774910e5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-alc5632.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with ALC5632 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-alc5632(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-alc5632
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headset Stereophone"
+        - "Int Spk"
+        - "Headset Mic"
+        - "Digital Mic"
+
+        # CODEC Pins
+        - SPKOUT
+        - SPKOUTN
+        - MICBIAS1
+        - MIC1
+        - HPR
+        - HPL
+        - DMICDAT
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-alc5632-paz00",
+                     "nvidia,tegra-audio-alc5632";
+
+        nvidia,model = "Compal PAZ00";
+
+        nvidia,audio-routing = "Int Spk", "SPKOUT",
+                               "Int Spk", "SPKOUTN",
+                               "Headset Mic", "MICBIAS1",
+                               "MIC1", "Headset Mic",
+                               "Headset Stereophone", "HPR",
+                               "Headset Stereophone", "HPL",
+                               "DMICDAT", "Digital Mic";
+
+        nvidia,i2s-controller = <&i2s>;
+        nvidia,audio-codec = <&codec>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml
new file mode 100644
index 000000000000..82801b4f46dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Common properties for NVIDIA Tegra audio complexes
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+properties:
+  clocks:
+    items:
+      - description: PLL A clock
+      - description: PLL A OUT0 clock
+      - description: The Tegra cdev1/extern1 clock, which feeds the card's mclk
+
+  clock-names:
+    items:
+      - const: pll_a
+      - const: pll_a_out0
+      - const: mclk
+
+  nvidia,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+
+  nvidia,ac97-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the AC97 controller
+
+  nvidia,i2s-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the Tegra I2S controller
+
+  nvidia,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of audio codec
+
+  nvidia,spkr-en-gpios:
+    maxItems: 1
+    description: The GPIO that enables the speakers
+
+  nvidia,hp-mute-gpios:
+    maxItems: 1
+    description: The GPIO that mutes the headphones
+
+  nvidia,hp-det-gpios:
+    maxItems: 1
+    description: The GPIO that detect headphones are plugged in
+
+  nvidia,mic-det-gpios:
+    maxItems: 1
+    description: The GPIO that detect microphone is plugged in
+
+  nvidia,ear-sel-gpios:
+    maxItems: 1
+    description: The GPIO that switch between the microphones
+
+  nvidia,int-mic-en-gpios:
+    maxItems: 1
+    description: The GPIO that enables the internal microphone
+
+  nvidia,ext-mic-en-gpios:
+    maxItems: 1
+    description: The GPIO that enables the external microphone
+
+  nvidia,headset:
+    type: boolean
+    description: The Mic Jack represents state of the headset microphone pin
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
new file mode 100644
index 000000000000..b4bee466d67a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-graph-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph based Tegra sound card driver
+
+description: |
+  This is based on generic audio graph card driver along with additional
+  customizations for Tegra platforms. It uses the same bindings with
+  additional standard clock DT bindings required for Tegra.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: audio-graph.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra210-audio-graph-card
+      - nvidia,tegra186-audio-graph-card
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: pll_a
+      - const: plla_out0
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 3
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 3
+
+  assigned-clock-rates:
+    minItems: 1
+    maxItems: 3
+
+  interconnects:
+    items:
+      - description: APE read memory client
+      - description: APE write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+required:
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-parents
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra210-car.h>
+
+    tegra_sound {
+        compatible = "nvidia,tegra210-audio-graph-card";
+
+        clocks = <&tegra_car TEGRA210_CLK_PLL_A>,
+                 <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+        clock-names = "pll_a", "plla_out0";
+
+        assigned-clocks = <&tegra_car TEGRA210_CLK_PLL_A>,
+                          <&tegra_car TEGRA210_CLK_PLL_A_OUT0>,
+                          <&tegra_car TEGRA210_CLK_EXTERN1>;
+        assigned-clock-parents = <0>, <0>, <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+        assigned-clock-rates = <368640000>, <49152000>, <12288000>;
+
+        dais = /* FE */
+               <&admaif1_port>,
+               /* Router */
+               <&xbar_i2s1_port>,
+               /* I/O DAP Ports */
+               <&i2s1_port>;
+
+        label = "jetson-tx1-ape";
+    };
+
+    // The ports are defined for AHUB and its child devices.
+    ahub@702d0800 {
+        compatible = "nvidia,tegra210-ahub";
+        reg = <0x702d0800 0x800>;
+        clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+        clock-names = "ahub";
+        assigned-clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x702d0000 0x702d0000 0x0000e400>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0x0>;
+                xbar_admaif1_ep: endpoint {
+                    remote-endpoint = <&admaif1_ep>;
+                };
+            };
+
+            // ...
+
+            xbar_i2s1_port: port@a {
+                reg = <0xa>;
+                xbar_i2s1_ep: endpoint {
+                    remote-endpoint = <&i2s1_cif_ep>;
+                };
+            };
+        };
+
+        admaif@702d0000 {
+            compatible = "nvidia,tegra210-admaif";
+            reg = <0x702d0000 0x800>;
+            dmas = <&adma 1>,  <&adma 1>,
+                   <&adma 2>,  <&adma 2>,
+                   <&adma 3>,  <&adma 3>,
+                   <&adma 4>,  <&adma 4>,
+                   <&adma 5>,  <&adma 5>,
+                   <&adma 6>,  <&adma 6>,
+                   <&adma 7>,  <&adma 7>,
+                   <&adma 8>,  <&adma 8>,
+                   <&adma 9>,  <&adma 9>,
+                   <&adma 10>, <&adma 10>;
+            dma-names = "rx1",  "tx1",
+                        "rx2",  "tx2",
+                        "rx3",  "tx3",
+                        "rx4",  "tx4",
+                        "rx5",  "tx5",
+                        "rx6",  "tx6",
+                        "rx7",  "tx7",
+                        "rx8",  "tx8",
+                        "rx9",  "tx9",
+                        "rx10", "tx10";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                admaif1_port: port@0 {
+                    reg = <0x0>;
+                    admaif1_ep: endpoint {
+                        remote-endpoint = <&xbar_admaif1_ep>;
+                    };
+                };
+
+                // More ADMAIF ports to follow
+            };
+        };
+
+        i2s@702d1000 {
+            compatible = "nvidia,tegra210-i2s";
+            clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+            clock-names = "i2s";
+            assigned-clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+            assigned-clock-rates = <1536000>;
+            reg = <0x702d1000 0x100>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0x0>;
+
+                    i2s1_cif_ep: endpoint {
+                        remote-endpoint = <&xbar_i2s1_ep>;
+                    };
+                };
+
+                i2s1_port: port@1 {
+                    reg = <0x1>;
+
+                    i2s1_dap: endpoint {
+                        dai-format = "i2s";
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt
deleted file mode 100644
index c3495beba358..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-NVIDIA Tegra audio complex, with MAX98090 CODEC
-
-Required properties:
-- compatible : "nvidia,tegra-audio-max98090"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the MAX98090's pins (as documented in its binding), and the jacks
-  on the board:
-
-  * Headphones
-  * Speakers
-  * Mic Jack
-  * Int Mic
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
-  connected to the CODEC.
-- nvidia,audio-codec : The phandle of the MAX98090 audio codec.
-
-Optional properties:
-- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
-- nvidia,mic-det-gpios : The GPIO that detect microphones are plugged in
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-max98090-venice2",
-		     "nvidia,tegra-audio-max98090";
-	nvidia,model = "NVIDIA Tegra Venice2";
-
-	nvidia,audio-routing =
-		"Headphones", "HPR",
-		"Headphones", "HPL",
-		"Speakers", "SPKR",
-		"Speakers", "SPKL",
-		"Mic Jack", "MICBIAS",
-		"IN34", "Mic Jack";
-
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&acodec>;
-
-	clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
-		 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-		 <&tegra_car TEGRA124_CLK_EXTERN1>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.yaml
new file mode 100644
index 000000000000..ccc2ee77ca30
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-max98090.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with MAX98090 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: '^[a-z0-9]+,tegra-audio-max98090(-[a-z0-9]+)+$'
+          - const: nvidia,tegra-audio-max98090
+      - items:
+          - enum:
+              - nvidia,tegra-audio-max98090-nyan-big
+              - nvidia,tegra-audio-max98090-nyan-blaze
+          - const: nvidia,tegra-audio-max98090-nyan
+          - const: nvidia,tegra-audio-max98090
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphones"
+        - "Speakers"
+        - "Mic Jack"
+        - "Int Mic"
+
+        # CODEC Pins
+        - MIC1
+        - MIC2
+        - DMICL
+        - DMICR
+        - IN1
+        - IN2
+        - IN3
+        - IN4
+        - IN5
+        - IN6
+        - IN12
+        - IN34
+        - IN56
+        - HPL
+        - HPR
+        - SPKL
+        - SPKR
+        - RCVL
+        - RCVR
+        - MICBIAS
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+
+    sound {
+        compatible = "nvidia,tegra-audio-max98090-venice2",
+                     "nvidia,tegra-audio-max98090";
+        nvidia,model = "NVIDIA Tegra Venice2";
+
+        nvidia,audio-routing =
+                "Headphones", "HPR",
+                "Headphones", "HPL",
+                "Speakers", "SPKR",
+                "Speakers", "SPKL",
+                "Mic Jack", "MICBIAS",
+                "IN34", "Mic Jack";
+
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&acodec>;
+
+        clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+                 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+                 <&tegra_car TEGRA124_CLK_EXTERN1>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
deleted file mode 100644
index 7788808dcd0b..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-NVIDIA Tegra audio complex, with RT5640 CODEC
-
-Required properties:
-- compatible : "nvidia,tegra-audio-rt5640"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the RT5640's pins (as documented in its binding), and the jacks
-  on the board:
-
-  * Headphones
-  * Speakers
-  * Mic Jack
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
-  connected to the CODEC.
-- nvidia,audio-codec : The phandle of the RT5640 audio codec. This binding
-  assumes that AIF1 on the CODEC is connected to Tegra.
-
-Optional properties:
-- nvidia,hp-det-gpios : The GPIO that detects headphones are plugged in
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-rt5640-dalmore",
-			"nvidia,tegra-audio-rt5640";
-	nvidia,model = "NVIDIA Tegra Dalmore";
-
-	nvidia,audio-routing =
-		"Headphones", "HPOR",
-		"Headphones", "HPOL",
-		"Speakers", "SPORP",
-		"Speakers", "SPORN",
-		"Speakers", "SPOLP",
-		"Speakers", "SPOLN";
-
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&rt5640>;
-
-	nvidia,hp-det-gpios = <&gpio 143 0>; /* GPIO PR7 */
-
-	clocks = <&tegra_car 216>, <&tegra_car 217>, <&tegra_car 120>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml
new file mode 100644
index 000000000000..b1deaf271afa
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-rt5640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with RT5639 or RT5640 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-rt56(39|40)(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-rt5640
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphones"
+        - "Speakers"
+        - "Mic Jack"
+
+        # CODEC Pins
+        - DMIC1
+        - DMIC2
+        - MICBIAS1
+        - IN1P
+        - IN1R
+        - IN2P
+        - IN2R
+        - HPOL
+        - HPOR
+        - LOUTL
+        - LOUTR
+        - MONOP
+        - MONON
+        - SPOLP
+        - SPOLN
+        - SPORP
+        - SPORN
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-rt5640-dalmore",
+                     "nvidia,tegra-audio-rt5640";
+        nvidia,model = "NVIDIA Tegra Dalmore";
+
+        nvidia,audio-routing =
+                "Headphones", "HPOR",
+                "Headphones", "HPOL",
+                "Speakers", "SPORP",
+                "Speakers", "SPORN",
+                "Speakers", "SPOLP",
+                "Speakers", "SPOLN";
+
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&rt5640>;
+
+        nvidia,hp-det-gpios = <&gpio 143 0>;
+
+        clocks = <&clk 216>, <&clk 217>, <&clk 120>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.txt
deleted file mode 100644
index a4589cda214e..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-NVIDIA Tegra audio complex, with RT5677 CODEC
-
-Required properties:
-- compatible : "nvidia,tegra-audio-rt5677"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the RT5677's pins (as documented in its binding), and the jacks
-  on the board:
-
-  * Headphone
-  * Speaker
-  * Headset Mic
-  * Internal Mic 1
-  * Internal Mic 2
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
-  connected to the CODEC.
-- nvidia,audio-codec : The phandle of the RT5677 audio codec. This binding
-  assumes that AIF1 on the CODEC is connected to Tegra.
-
-Optional properties:
-- nvidia,hp-det-gpios : The GPIO that detects headphones are plugged in
-- nvidia,hp-en-gpios : The GPIO that enables headphone amplifier
-- nvidia,mic-present-gpios: The GPIO that mic jack is plugged in
-- nvidia,dmic-clk-en-gpios : The GPIO that gates DMIC clock signal
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-rt5677-ryu",
-	        "nvidia,tegra-audio-rt5677";
-	nvidia,model = "NVIDIA Tegra Ryu";
-
-	nvidia,audio-routing =
-		"Headphone", "LOUT2",
-		"Headphone", "LOUT1",
-		"Headset Mic", "MICBIAS1",
-		"IN1P", "Headset Mic",
-		"IN1N", "Headset Mic",
-		"DMIC L1", "Internal Mic 1",
-		"DMIC R1", "Internal Mic 1",
-		"DMIC L2", "Internal Mic 2",
-		"DMIC R2", "Internal Mic 2",
-		"Speaker", "PDM1L",
-		"Speaker", "PDM1R";
-
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&rt5677>;
-
-	nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
-	nvidia,mic-present-gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
-	nvidia,hp-en-gpios = <&rt5677 1 GPIO_ACTIVE_HIGH>;
-	nvidia,dmic-clk-en-gpios = <&rt5677 2 GPIO_ACTIVE_HIGH>;
-
-	clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
-	         <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-	         <&tegra_car TEGRA124_CLK_EXTERN1>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.yaml
new file mode 100644
index 000000000000..a49997d6028b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-rt5677.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with RT5677 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-rt5677(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-rt5677
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone"
+        - "Speaker"
+        - "Headset Mic"
+        - "Internal Mic 1"
+        - "Internal Mic 2"
+
+        # CODEC Pins
+        - IN1P
+        - IN1N
+        - IN2P
+        - IN2N
+        - MICBIAS1
+        - DMIC1
+        - DMIC2
+        - DMIC3
+        - DMIC4
+        - "DMIC L1"
+        - "DMIC L2"
+        - "DMIC L3"
+        - "DMIC L4"
+        - "DMIC R1"
+        - "DMIC R2"
+        - "DMIC R3"
+        - "DMIC R4"
+        - LOUT1
+        - LOUT2
+        - LOUT3
+        - PDM1L
+        - PDM1R
+        - PDM2L
+        - PDM2R
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-rt5677-ryu",
+                     "nvidia,tegra-audio-rt5677";
+        nvidia,model = "NVIDIA Tegra Ryu";
+
+        nvidia,audio-routing =
+                "Headphone", "LOUT2",
+                "Headphone", "LOUT1",
+                "Headset Mic", "MICBIAS1",
+                "IN1P", "Headset Mic",
+                "IN1N", "Headset Mic",
+                "DMIC L1", "Internal Mic 1",
+                "DMIC R1", "Internal Mic 1",
+                "DMIC L2", "Internal Mic 2",
+                "DMIC R2", "Internal Mic 2",
+                "Speaker", "PDM1L",
+                "Speaker", "PDM1R";
+
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&rt5677>;
+
+        nvidia,hp-det-gpios = <&gpio 143 0>;
+
+        clocks = <&clk 216>,
+                 <&clk 217>,
+                 <&clk 121>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.txt
deleted file mode 100644
index 5da7da4ea07a..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-NVIDIA Tegra audio complex, with SGTL5000 CODEC
-
-Required properties:
-- compatible : "nvidia,tegra-audio-sgtl5000"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the SGTL5000's pins (as documented in its binding), and the jacks
-  on the board:
-
-  * Headphone Jack
-  * Line In Jack
-  * Mic Jack
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
-  connected to the CODEC.
-- nvidia,audio-codec : The phandle of the SGTL5000 audio codec.
-
-Example:
-
-sound {
-	compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
-		     "nvidia,tegra-audio-sgtl5000";
-	nvidia,model = "Toradex Apalis T30";
-	nvidia,audio-routing =
-		"Headphone Jack", "HP_OUT",
-		"LINE_IN", "Line In Jack",
-		"MIC_IN", "Mic Jack";
-	nvidia,i2s-controller = <&tegra_i2s2>;
-	nvidia,audio-codec = <&sgtl5000>;
-	clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
-		 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-		 <&tegra_car TEGRA30_CLK_EXTERN1>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.yaml
new file mode 100644
index 000000000000..943e7c01741c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-sgtl5000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with SGTL5000 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-sgtl5000([-_][a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-sgtl5000
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone Jack"
+        - "Line In Jack"
+        - "Mic Jack"
+
+        # CODEC Pins
+        - HP_OUT
+        - LINE_OUT
+        - LINE_IN
+        - MIC_IN
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra30-car.h>
+
+    sound {
+      compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+                   "nvidia,tegra-audio-sgtl5000";
+      nvidia,model = "Toradex Apalis T30 SGTL5000";
+      nvidia,audio-routing =
+              "Headphone Jack", "HP_OUT",
+              "LINE_IN", "Line In Jack",
+              "MIC_IN", "Mic Jack";
+      nvidia,i2s-controller = <&tegra_i2s2>;
+      nvidia,audio-codec = <&codec>;
+      clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+               <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+               <&tegra_car TEGRA30_CLK_EXTERN1>;
+      clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt
deleted file mode 100644
index ef1fe7358279..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-NVIDIA Tegra audio complex for TrimSlice
-
-Required properties:
-- compatible : "nvidia,tegra-audio-trimslice"
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : Must include the following entries:
-  "pll_a" (The Tegra clock of that name),
-  "pll_a_out0" (The Tegra clock of that name),
-  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
-- nvidia,audio-codec : The phandle of the WM8903 audio codec
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-trimslice";
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&codec>;
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.yaml
new file mode 100644
index 000000000000..8c87cd166238
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-trimslice.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with TrimSlice CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    const: nvidia,tegra-audio-trimslice
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-trimslice";
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&codec>;
+        clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
deleted file mode 100644
index 96f6a57dd6b4..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-NVIDIA Tegra audio complex
-
-Required properties:
-- compatible : "nvidia,tegra-audio-wm8753"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the WM8753's pins as documented in the binding for the WM8753,
-  and the jacks on the board:
-
-  * Headphone Jack
-  * Mic Jack
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
-- nvidia,audio-codec : The phandle of the WM8753 audio codec
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-wm8753-whistler",
-		     "nvidia,tegra-audio-wm8753"
-	nvidia,model = "tegra-wm8753-harmony";
-
-	nvidia,audio-routing =
-		"Headphone Jack", "LOUT1",
-		"Headphone Jack", "ROUT1";
-
-	nvidia,i2s-controller = <&i2s1>;
-	nvidia,audio-codec = <&wm8753>;
-
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
-
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.yaml
new file mode 100644
index 000000000000..a5b431d7d0c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-wm8753.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with WM8753 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-wm8753(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-wm8753
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone Jack"
+        - "Mic Jack"
+
+        # CODEC Pins
+        - LOUT1
+        - LOUT2
+        - ROUT1
+        - ROUT2
+        - MONO1
+        - MONO2
+        - OUT3
+        - OUT4
+        - LINE1
+        - LINE2
+        - RXP
+        - RXN
+        - ACIN
+        - ACOP
+        - MIC1N
+        - MIC1
+        - MIC2N
+        - MIC2
+        - "Mic Bias"
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-wm8753-whistler",
+                     "nvidia,tegra-audio-wm8753";
+        nvidia,model = "tegra-wm8753-harmony";
+
+        nvidia,audio-routing =
+                "Headphone Jack", "LOUT1",
+                "Headphone Jack", "ROUT1";
+
+        nvidia,i2s-controller = <&i2s1>;
+        nvidia,audio-codec = <&wm8753>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
deleted file mode 100644
index b795d282818d..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-NVIDIA Tegra audio complex
-
-Required properties:
-- compatible : "nvidia,tegra-audio-wm8903"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the WM8903's pins (documented in the WM8903 binding document),
-  and the jacks on the board:
-
-  * Headphone Jack
-  * Int Spk
-  * Mic Jack
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
-- nvidia,audio-codec : The phandle of the WM8903 audio codec
-
-Optional properties:
-- nvidia,spkr-en-gpios : The GPIO that enables the speakers
-- nvidia,hp-mute-gpios : The GPIO that mutes the headphones
-- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
-- nvidia,int-mic-en-gpios : The GPIO that enables the internal microphone
-- nvidia,ext-mic-en-gpios : The GPIO that enables the external microphone
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-wm8903-harmony",
-		     "nvidia,tegra-audio-wm8903"
-	nvidia,model = "tegra-wm8903-harmony";
-
-	nvidia,audio-routing =
-		"Headphone Jack", "HPOUTR",
-		"Headphone Jack", "HPOUTL",
-		"Int Spk", "ROP",
-		"Int Spk", "RON",
-		"Int Spk", "LOP",
-		"Int Spk", "LON",
-		"Mic Jack", "MICBIAS",
-		"IN1L", "Mic Jack";
-
-	nvidia,i2s-controller = <&i2s1>;
-	nvidia,audio-codec = <&wm8903>;
-
-	nvidia,spkr-en-gpios = <&codec 2 0>;
-	nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
-	nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
-	nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
-
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
-
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.yaml
new file mode 100644
index 000000000000..1b836acab980
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-wm8903.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with WM8903 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: '^[a-z0-9]+,tegra-audio-wm8903(-[a-z0-9]+)+$'
+          - const: nvidia,tegra-audio-wm8903
+      - items:
+          - pattern: ad,tegra-audio-plutux
+          - const: nvidia,tegra-audio-wm8903
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone Jack"
+        - "Int Spk"
+        - "Mic Jack"
+        - "Int Mic"
+
+        # CODEC Pins
+        - IN1L
+        - IN1R
+        - IN2L
+        - IN2R
+        - IN3L
+        - IN3R
+        - DMICDAT
+        - HPOUTL
+        - HPOUTR
+        - LINEOUTL
+        - LINEOUTR
+        - LOP
+        - LON
+        - ROP
+        - RON
+        - MICBIAS
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-wm8903-harmony",
+                     "nvidia,tegra-audio-wm8903";
+        nvidia,model = "tegra-wm8903-harmony";
+
+        nvidia,audio-routing =
+                "Headphone Jack", "HPOUTR",
+                "Headphone Jack", "HPOUTL",
+                "Int Spk", "ROP",
+                "Int Spk", "RON",
+                "Int Spk", "LOP",
+                "Int Spk", "LON",
+                "Mic Jack", "MICBIAS",
+                "IN1L", "Mic Jack";
+
+        nvidia,i2s-controller = <&i2s1>;
+        nvidia,audio-codec = <&wm8903>;
+
+        nvidia,spkr-en-gpios = <&codec 2 0>;
+        nvidia,hp-det-gpios = <&gpio 178 0>;
+        nvidia,int-mic-en-gpios = <&gpio 184 0>;
+        nvidia,ext-mic-en-gpios = <&gpio 185 0>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
deleted file mode 100644
index 436f6cd9d07c..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-NVIDIA Tegra audio complex
-
-Required properties:
-- compatible : "nvidia,tegra-audio-wm9712"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the WM9712's pins, and the jacks on the board:
-
-  WM9712 pins:
-
-  * MONOOUT
-  * HPOUTL
-  * HPOUTR
-  * LOUT2
-  * ROUT2
-  * OUT3
-  * LINEINL
-  * LINEINR
-  * PHONE
-  * PCBEEP
-  * MIC1
-  * MIC2
-  * Mic Bias
-
-  Board connectors:
-
-  * Headphone
-  * LineIn
-  * Mic
-
-- nvidia,ac97-controller : The phandle of the Tegra AC97 controller
-
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
-		         "nvidia,tegra-audio-wm9712";
-	nvidia,model = "Toradex Colibri T20";
-
-	nvidia,audio-routing =
-		"Headphone", "HPOUTL",
-		"Headphone", "HPOUTR",
-		"LineIn", "LINEINL",
-		"LineIn", "LINEINR",
-		"Mic", "MIC1";
-
-	nvidia,ac97-controller = <&ac97>;
-
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.yaml
new file mode 100644
index 000000000000..a1448283344b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-wm9712.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with WM9712 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-wm9712([-_][a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-wm9712
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone"
+        - "LineIn"
+        - "Mic"
+
+        # CODEC Pins
+        - MONOOUT
+        - HPOUTL
+        - HPOUTR
+        - LOUT2
+        - ROUT2
+        - OUT3
+        - LINEINL
+        - LINEINR
+        - PHONE
+        - PCBEEP
+        - MIC1
+        - MIC2
+        - "Mic Bias"
+
+required:
+  - nvidia,ac97-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
+                     "nvidia,tegra-audio-wm9712";
+        nvidia,model = "Toradex Colibri T20";
+
+        nvidia,audio-routing =
+                "Headphone", "HPOUTL",
+                "Headphone", "HPOUTR",
+                "LineIn", "LINEINL",
+                "LineIn", "LINEINR",
+                "Mic", "MIC1";
+
+        nvidia,ac97-controller = <&ac97>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml
new file mode 100644
index 000000000000..d82415c21271
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra186-asrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra186 ASRC
+
+description: |
+  Asynchronous Sample Rate Converter (ASRC) converts the sampling frequency
+  of the input signal from one frequency to another. It can handle over a
+  wide range of sample rate ratios (freq_in/freq_out) from 1:24 to 24:1.
+  ASRC has two modes of operation. One where ratio can be programmed in SW
+  and the other where it gets the information from ratio estimator module.
+
+  It supports  sample rate conversions in the range of 8 to 192 kHz and
+  supports 6 streams upto 12 total channels. The input data size can be
+  16, 24 and 32 bits.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^asrc@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-asrc
+      - items:
+          - enum:
+              - nvidia,tegra234-asrc
+              - nvidia,tegra194-asrc
+          - const: nvidia,tegra186-asrc
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^ASRC[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      ASRC has seven input ports and six output ports. Accordingly ACIF
+      (Audio Client Interfaces) port nodes are defined to represent the
+      ASRC inputs (port 0 to 6) and outputs (port 7 to 12). These are
+      connected to corresponding ports on AHUB (Audio Hub). Additional
+      input (port 6) is for receiving ratio information from estimator.
+
+    patternProperties:
+      '^port@[0-6]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ASRC ACIF input ports
+      '^port@[7-9]|1[1-2]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ASRC ACIF output ports
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    asrc@2910000 {
+        compatible = "nvidia,tegra186-asrc";
+        reg = <0x2910000 0x2000>;
+        sound-name-prefix = "ASRC1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
new file mode 100644
index 000000000000..3d538df878ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra186-dspk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra186 DSPK Controller
+
+description: |
+  The Digital Speaker Controller (DSPK) can be viewed as a Pulse
+  Density Modulation (PDM) transmitter that up-samples the input to
+  the desired sampling rate by interpolation and then converts the
+  over sampled Pulse Code Modulation (PCM) input to the desired 1-bit
+  output via Delta Sigma Modulation (DSM).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^dspk@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-dspk
+      - items:
+          - enum:
+              - nvidia,tegra234-dspk
+              - nvidia,tegra194-dspk
+          - const: nvidia,tegra186-dspk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dspk
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^DSPK[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          DSPK ACIF (Audio Client Interface) port connected to the
+          corresponding AHUB (Audio Hub) ACIF port.
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          DSPK DAP (Digital Audio Port) interface which can be connected
+          to external audio codec for playback.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-parents
+  - sound-name-prefix
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra186-clock.h>
+
+    dspk@2905000 {
+        compatible = "nvidia,tegra186-dspk";
+        reg = <0x2905000 0x100>;
+        clocks = <&bpmp TEGRA186_CLK_DSPK1>;
+        clock-names = "dspk";
+        assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>;
+        assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+        assigned-clock-rates = <12288000>;
+        sound-name-prefix = "DSPK1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
deleted file mode 100644
index dc30c6bfbe95..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-NVIDIA Tegra 20 I2S controller
-
-Required properties:
-- compatible : "nvidia,tegra20-i2s"
-- reg : Should contain I2S registers location and length
-- interrupts : Should contain I2S interrupt
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - i2s
-- dmas : Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names : Must include the following entries:
-  - rx
-  - tx
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-
-Example:
-
-i2s@70002800 {
-	compatible = "nvidia,tegra20-i2s";
-	reg = <0x70002800 0x200>;
-	interrupts = < 45 >;
-	clocks = <&tegra_car 11>;
-	resets = <&tegra_car 11>;
-	reset-names = "i2s";
-	dmas = <&apbdma 21>, <&apbdma 21>;
-	dma-names = "rx", "tx";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml
new file mode 100644
index 000000000000..68ae124eaf80
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 I2S Controller
+
+description: |
+  The I2S Controller streams synchronous serial audio data between system
+  memory and an external audio device. The controller supports the I2S Left
+  Justified Mode, Right Justified Mode, and DSP mode formats.
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-i2s
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: i2s
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  dmas:
+    minItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  nvidia,fixed-parent-rate:
+    description: |
+      Specifies whether board prefers parent clock to stay at a fixed rate.
+      This allows multiple Tegra20 audio components work simultaneously by
+      limiting number of supportable audio rates.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+  - interrupts
+  - clocks
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    i2s@70002800 {
+        compatible = "nvidia,tegra20-i2s";
+        reg = <0x70002800 0x200>;
+        interrupts = <45>;
+        clocks = <&tegra_car 11>;
+        resets = <&tegra_car 11>;
+        reset-names = "i2s";
+        dmas = <&apbdma 21>, <&apbdma 21>;
+        dma-names = "rx", "tx";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml
new file mode 100644
index 000000000000..60a368a132b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 S/PDIF Controller
+
+description: |
+  The S/PDIF controller supports both input and output in serial audio
+  digital interface format. The input controller can digitally recover
+  a clock from the received stream. The S/PDIF controller is also used
+  to generate the embedded audio for HDMI output channel.
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-spdif
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: out
+      - const: in
+
+  dmas:
+    minItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  "#sound-dai-cells":
+    const: 0
+
+  nvidia,fixed-parent-rate:
+    description: |
+      Specifies whether board prefers parent clock to stay at a fixed rate.
+      This allows multiple Tegra20 audio components work simultaneously by
+      limiting number of supportable audio rates.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - resets
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    spdif@70002400 {
+        compatible = "nvidia,tegra20-spdif";
+        reg = <0x70002400 0x200>;
+        interrupts = <77>;
+        clocks = <&clk 99>, <&clk 98>;
+        clock-names = "out", "in";
+        resets = <&rst 10>;
+        dmas = <&apbdma 3>, <&apbdma 3>;
+        dma-names = "rx", "tx";
+        #sound-dai-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
new file mode 100644
index 000000000000..15ab40aeab1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-admaif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 ADMAIF
+
+description: |
+  ADMAIF is the interface between ADMA and AHUB. Each ADMA channel
+  that sends/receives data to/from AHUB must interface through an
+  ADMAIF channel. ADMA channel sending data to AHUB pairs with ADMAIF
+  Tx channel and ADMA channel receiving data from AHUB pairs with
+  ADMAIF Rx channel.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^admaif@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra210-admaif
+          - nvidia,tegra186-admaif
+      - items:
+          - enum:
+              - nvidia,tegra234-admaif
+              - nvidia,tegra194-admaif
+          - const: nvidia,tegra186-admaif
+
+  reg:
+    maxItems: 1
+
+  dmas: true
+
+  dma-names: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Contains list of ACIF (Audio CIF) port nodes for ADMAIF channels.
+      The number of port nodes depends on the number of ADMAIF channels
+      that SoC may have. These are interfaced with respective ACIF ports
+      in AHUB (Audio Hub). Each port is capable of data transfers in
+      both directions.
+
+    patternProperties:
+      '^port@[0-9]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: nvidia,tegra210-admaif
+
+then:
+  properties:
+    dmas:
+      description:
+        DMA channel specifiers, equally divided for Tx and Rx.
+      minItems: 1
+      maxItems: 20
+    dma-names:
+      items:
+        pattern: "^[rt]x(10|[1-9])$"
+      description:
+        Should be "rx1", "rx2" ... "rx10" for DMA Rx channel
+        Should be "tx1", "tx2" ... "tx10" for DMA Tx channel
+      minItems: 1
+      maxItems: 20
+
+else:
+  properties:
+    dmas:
+      description:
+        DMA channel specifiers, equally divided for Tx and Rx.
+      minItems: 1
+      maxItems: 40
+    dma-names:
+      items:
+        pattern: "^[rt]x(1[0-9]|[1-9]|20)$"
+      description:
+        Should be "rx1", "rx2" ... "rx20" for DMA Rx channel
+        Should be "tx1", "tx2" ... "tx20" for DMA Tx channel
+      minItems: 1
+      maxItems: 40
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    admaif@702d0000 {
+        compatible = "nvidia,tegra210-admaif";
+        reg = <0x702d0000 0x800>;
+        dmas = <&adma 1>,  <&adma 1>,
+               <&adma 2>,  <&adma 2>,
+               <&adma 3>,  <&adma 3>,
+               <&adma 4>,  <&adma 4>,
+               <&adma 5>,  <&adma 5>,
+               <&adma 6>,  <&adma 6>,
+               <&adma 7>,  <&adma 7>,
+               <&adma 8>,  <&adma 8>,
+               <&adma 9>,  <&adma 9>,
+               <&adma 10>, <&adma 10>;
+        dma-names = "rx1",  "tx1",
+                    "rx2",  "tx2",
+                    "rx3",  "tx3",
+                    "rx4",  "tx4",
+                    "rx5",  "tx5",
+                    "rx6",  "tx6",
+                    "rx7",  "tx7",
+                    "rx8",  "tx8",
+                    "rx9",  "tx9",
+                    "rx10", "tx10";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
new file mode 100644
index 000000000000..ea0dc0ece1bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-adx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 ADX
+
+description: |
+  The Audio Demultiplexer (ADX) block takes an input stream with up to
+  16 channels and demultiplexes it into four output streams of up to 16
+  channels each. A byte RAM helps to form output frames by any combination
+  of bytes from the input frame. Its design is identical to that of byte
+  RAM in the AMX except that the data flow direction is reversed.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^adx@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-adx
+      - items:
+          - enum:
+              - nvidia,tegra234-adx
+              - nvidia,tegra194-adx
+              - nvidia,tegra186-adx
+          - const: nvidia,tegra210-adx
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^ADX[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      ADX has one input and four outputs. Accordingly ACIF (Audio Client
+      Interface) port nodes are defined to represent ADX input (port 0)
+      and outputs (ports 1 to 4). These are connected to corresponding
+      ports on AHUB (Audio Hub).
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ADX ACIF input port
+    patternProperties:
+      '^port@[1-4]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ADX ACIF output ports
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    adx@702d3800 {
+        compatible = "nvidia,tegra210-adx";
+        reg = <0x702d3800 0x100>;
+        sound-name-prefix = "ADX1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
new file mode 100644
index 000000000000..89f7805de274
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-ahub.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 AHUB
+
+description: |
+  The Audio Hub (AHUB) comprises a collection of hardware accelerators
+  for audio pre-processing, post-processing and a programmable full
+  crossbar for routing audio data across these accelerators. It has
+  external interfaces such as I2S, DMIC, DSPK. It interfaces with ADMA
+  engine through ADMAIF.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^ahub@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra210-ahub
+          - nvidia,tegra186-ahub
+          - nvidia,tegra234-ahub
+      - items:
+          - const: nvidia,tegra194-ahub
+          - const: nvidia,tegra186-ahub
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ahub
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Contains list of ACIF (Audio CIF) port nodes for AHUB (Audio Hub).
+      These are connected to ACIF interfaces of AHUB clients. Thus the
+      number of port nodes depend on the number of clients that AHUB may
+      have depending on the SoC revision.
+
+    patternProperties:
+      '^port@[0-9]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+
+patternProperties:
+  '^i2s@[0-9a-f]+$':
+    type: object
+
+  '^dmic@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-dmic.yaml#
+
+  '^admaif@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-admaif.yaml#
+
+  '^dspk@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra186-dspk.yaml#
+
+  '^mvc@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-mvc.yaml#
+
+  '^sfc@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-sfc.yaml#
+
+  '^amx@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-amx.yaml#
+
+  '^adx@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-adx.yaml#
+
+  '^amixer@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-mixer.yaml#
+
+  '^asrc@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra186-asrc.yaml#
+
+  '^processing-engine@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-ope.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-parents
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra210-car.h>
+
+    ahub@702d0800 {
+        compatible = "nvidia,tegra210-ahub";
+        reg = <0x702d0800 0x800>;
+        clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+        clock-names = "ahub";
+        assigned-clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x702d0000 0x702d0000 0x0000e400>;
+
+        // All AHUB child nodes below
+        admaif@702d0000 {
+            compatible = "nvidia,tegra210-admaif";
+            reg = <0x702d0000 0x800>;
+            dmas = <&adma 1>,  <&adma 1>,
+               <&adma 2>,  <&adma 2>,
+               <&adma 3>,  <&adma 3>,
+               <&adma 4>,  <&adma 4>,
+               <&adma 5>,  <&adma 5>,
+               <&adma 6>,  <&adma 6>,
+               <&adma 7>,  <&adma 7>,
+               <&adma 8>,  <&adma 8>,
+               <&adma 9>,  <&adma 9>,
+               <&adma 10>, <&adma 10>;
+            dma-names = "rx1",  "tx1",
+                    "rx2",  "tx2",
+                    "rx3",  "tx3",
+                    "rx4",  "tx4",
+                    "rx5",  "tx5",
+                    "rx6",  "tx6",
+                    "rx7",  "tx7",
+                    "rx8",  "tx8",
+                    "rx9",  "tx9",
+                    "rx10", "tx10";
+        };
+
+        i2s@702d1000 {
+            compatible = "nvidia,tegra210-i2s";
+            reg = <0x702d1000 0x100>;
+            clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+            clock-names = "i2s";
+            assigned-clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+            assigned-clock-rates = <1536000>;
+            sound-name-prefix = "I2S1";
+        };
+
+        dmic@702d4000 {
+            compatible = "nvidia,tegra210-dmic";
+            reg = <0x702d4000 0x100>;
+            clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+            clock-names = "dmic";
+            assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+            assigned-clock-rates = <3072000>;
+            sound-name-prefix = "DMIC1";
+        };
+
+        // More child nodes to follow
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
new file mode 100644
index 000000000000..1aff61f072bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-amx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 AMX
+
+description: |
+  The Audio Multiplexer (AMX) block can multiplex up to four input streams
+  each of which can have maximum 16 channels and generate an output stream
+  with maximum 16 channels. A byte RAM helps to form an output frame by
+  any combination of bytes from the input frames.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^amx@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-amx
+      - items:
+          - const: nvidia,tegra186-amx
+          - const: nvidia,tegra210-amx
+      - const: nvidia,tegra194-amx
+      - items:
+          - const: nvidia,tegra234-amx
+          - const: nvidia,tegra194-amx
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^AMX[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      AMX has four inputs and one output. Accordingly ACIF (Audio Client
+      Interfaces) port nodes are defined to represent AMX inputs (port 0
+      to 3) and output (port 4). These are connected to corresponding
+      ports on AHUB (Audio Hub).
+
+    patternProperties:
+      '^port@[0-3]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: AMX ACIF input ports
+
+    properties:
+      port@4:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: AMX ACIF output port
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    amx@702d3000 {
+        compatible = "nvidia,tegra210-amx";
+        reg = <0x702d3000 0x100>;
+        sound-name-prefix = "AMX1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
new file mode 100644
index 000000000000..0f9d2b461e02
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-dmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 DMIC Controller
+
+description: |
+  The Digital MIC (DMIC) Controller is used to interface with Pulse
+  Density Modulation (PDM) input devices. It converts PDM signals to
+  Pulse Coded Modulation (PCM) signals. DMIC can be viewed as a PDM
+  receiver.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^dmic@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-dmic
+      - items:
+          - enum:
+              - nvidia,tegra234-dmic
+              - nvidia,tegra194-dmic
+              - nvidia,tegra186-dmic
+          - const: nvidia,tegra210-dmic
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dmic
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^DMIC[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          DMIC ACIF (Audio Client Interface) port connected to the
+          corresponding AHUB (Audio Hub) ACIF port.
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          DMIC DAP (Digital Audio Port) interface which can be connected
+          to external audio codec for capture.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-parents
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra210-car.h>
+
+    dmic@702d4000 {
+        compatible = "nvidia,tegra210-dmic";
+        reg = <0x702d4000 0x100>;
+        clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+        clock-names = "dmic";
+        assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+        assigned-clock-rates = <3072000>;
+        sound-name-prefix = "DMIC1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
new file mode 100644
index 000000000000..12cd17eede99
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 I2S Controller
+
+description: |
+  The Inter-IC Sound (I2S) controller implements full-duplex,
+  bi-directional and single direction point-to-point serial
+  interfaces. It can interface with I2S compatible devices.
+  I2S controller can operate both in master and slave mode.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^i2s@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-i2s
+      - items:
+          - enum:
+              - nvidia,tegra234-i2s
+              - nvidia,tegra194-i2s
+              - nvidia,tegra186-i2s
+          - const: nvidia,tegra210-i2s
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: I2S bit clock
+      - description:
+          Sync input clock, which can act as clock source to other I/O
+          modules in AHUB. The Tegra I2S driver sets this clock rate as
+          per bit clock rate. I/O module which wants to use this clock
+          as source, can mention this clock as parent in the DT bindings.
+          This is an optional clock entry, since it is only required when
+          some other I/O wants to reference from a particular I2Sx
+          instance.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: i2s
+      - const: sync_input
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clock-rates:
+    minItems: 1
+    maxItems: 2
+
+  sound-name-prefix:
+    pattern: "^I2S[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          I2S ACIF (Audio Client Interface) port connected to the
+          corresponding AHUB (Audio Hub) ACIF port.
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          I2S DAP (Digital Audio Port) interface which can be connected
+          to external audio codec for playback or capture.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-parents
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra210-car.h>
+
+    i2s@702d1000 {
+        compatible = "nvidia,tegra210-i2s";
+        reg = <0x702d1000 0x100>;
+        clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+        clock-names = "i2s";
+        assigned-clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+        assigned-clock-rates = <1536000>;
+        sound-name-prefix = "I2S1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml
new file mode 100644
index 000000000000..5b9198602fc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mbdrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 MBDRC
+
+description:
+  The Multi Band Dynamic Range Compressor (MBDRC) is part of Output
+  Processing Engine (OPE) which interfaces with Audio Hub (AHUB) via
+  Audio Client Interface (ACIF). MBDRC can be used as a traditional
+  single full band or a dual band or a multi band dynamic processor.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-mbdrc
+      - items:
+          - enum:
+              - nvidia,tegra234-mbdrc
+              - nvidia,tegra194-mbdrc
+              - nvidia,tegra186-mbdrc
+          - const: nvidia,tegra210-mbdrc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dynamic-range-compressor@702d8200 {
+        compatible = "nvidia,tegra210-mbdrc";
+        reg = <0x702d8200 0x200>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
new file mode 100644
index 000000000000..570b03282aeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 Mixer
+
+description: |
+  The Mixer supports mixing of up to ten 7.1 audio input streams and
+  generate five outputs (each of which can be any combination of the
+  ten input streams).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^amixer@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-amixer
+      - items:
+          - enum:
+              - nvidia,tegra234-amixer
+              - nvidia,tegra194-amixer
+              - nvidia,tegra186-amixer
+          - const: nvidia,tegra210-amixer
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^MIXER[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Mixer has ten inputs and five outputs. Accordingly ACIF (Audio
+      Client Interfaces) port nodes are defined to represent Mixer
+      inputs (port 0 to 9) and outputs (port 10 to 14). These are
+      connected to corresponding ports on AHUB (Audio Hub).
+
+    patternProperties:
+      '^port@[0-9]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: Mixer ACIF input ports
+      '^port@[10-14]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: Mixer ACIF output ports
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    amixer@702dbb00 {
+        compatible = "nvidia,tegra210-amixer";
+        reg = <0x702dbb00 0x800>;
+        sound-name-prefix = "MIXER1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
new file mode 100644
index 000000000000..4aecbc847b98
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mvc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 MVC
+
+description: |
+  The Master Volume Control (MVC) provides gain or attenuation to a digital
+  signal path. It can be used in input or output signal path for per-stream
+  volume control or it can be used as master volume control. The MVC block
+  has one input and one output. The input digital stream can be mono or
+  multi-channel (up to 7.1 channels) stream. An independent mute control is
+  also included in the MVC block.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^mvc@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-mvc
+      - items:
+          - enum:
+              - nvidia,tegra234-mvc
+              - nvidia,tegra194-mvc
+              - nvidia,tegra186-mvc
+          - const: nvidia,tegra210-mvc
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^MVC[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          MVC ACIF (Audio Client Interface) input port. This is connected
+          to corresponding ACIF output port on AHUB (Audio Hub).
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          MVC ACIF output port. This is connected to corresponding ACIF
+          input port on AHUB.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    mvc@702da000 {
+        compatible = "nvidia,tegra210-mvc";
+        reg = <0x702da000 0x200>;
+        sound-name-prefix = "MVC1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml
new file mode 100644
index 000000000000..9dc9ba590fa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-ope.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 OPE
+
+description:
+  The Output Processing Engine (OPE) is one of the AHUB client. It has
+  PEQ (Parametric Equalizer) and MBDRC (Multi Band Dynamic Range Compressor)
+  sub blocks for data processing.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-ope
+      - items:
+          - enum:
+              - nvidia,tegra234-ope
+              - nvidia,tegra194-ope
+              - nvidia,tegra186-ope
+          - const: nvidia,tegra210-ope
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  sound-name-prefix:
+    pattern: "^OPE[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description:
+          OPE ACIF (Audio Client Interface) input port. This is connected
+          to corresponding ACIF output port on AHUB (Audio Hub).
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description:
+          OPE ACIF output port. This is connected to corresponding ACIF
+          input port on AHUB.
+
+patternProperties:
+  '^equalizer@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-peq.yaml#
+
+  '^dynamic-range-compressor@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-mbdrc.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    processing-engine@702d8000 {
+        compatible = "nvidia,tegra210-ope";
+        reg = <0x702d8000 0x100>;
+        sound-name-prefix = "OPE1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml
new file mode 100644
index 000000000000..1e373c49d639
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-peq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 PEQ
+
+description:
+  The Parametric Equalizer (PEQ) is a cascade of biquad filters with
+  each filter tuned based on certain parameters. It can be used to
+  equalize the irregularities in the speaker frequency response.
+  PEQ sits inside Output Processing Engine (OPE) which interfaces
+  with Audio Hub (AHUB) via Audio Client Interface (ACIF).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-peq
+      - items:
+          - enum:
+              - nvidia,tegra234-peq
+              - nvidia,tegra194-peq
+              - nvidia,tegra186-peq
+          - const: nvidia,tegra210-peq
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    equalizer@702d8100 {
+        compatible = "nvidia,tegra210-peq";
+        reg = <0x702d8100 0x100>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
new file mode 100644
index 000000000000..694f890d6305
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-sfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 SFC
+
+description: |
+  The Sampling Frequency Converter (SFC) converts the sampling frequency
+  of the input signal from one frequency to another. It supports sampling
+  frequency conversions of streams of up to two channels (stereo).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^sfc@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-sfc
+      - items:
+          - enum:
+              - nvidia,tegra234-sfc
+              - nvidia,tegra194-sfc
+              - nvidia,tegra186-sfc
+          - const: nvidia,tegra210-sfc
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^SFC[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          SFC ACIF (Audio Client Interface) input port. This is connected
+          to corresponding ACIF output port on AHUB (Audio Hub).
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          SFC ACIF output port. This is connected to corresponding ACIF
+          input port on AHUB.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    sfc@702d2000 {
+        compatible = "nvidia,tegra210-sfc";
+        reg = <0x702d2000 0x200>;
+        sound-name-prefix = "SFC1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
deleted file mode 100644
index 21cd310963b1..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-NVIDIA Tegra30 HDA controller
-
-Required properties:
-- compatible : For Tegra30, must contain "nvidia,tegra30-hda".  Otherwise,
-  must contain '"nvidia,<chip>-hda", "nvidia,tegra30-hda"', where <chip> is
-  tegra114, tegra124, or tegra132.
-- reg : Should contain the HDA registers location and length.
-- interrupts : The interrupt from the HDA controller.
-- clocks : Must contain an entry for each required entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x
-
-Optional properties:
-- nvidia,model : The user-visible name of this sound complex. Since the property
-  is optional, legacy boards can use default name provided in hda driver.
-
-Example:
-
-hda@70030000 {
-	compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
-	reg = <0x0 0x70030000 0x0 0x10000>;
-	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA124_CLK_HDA>,
-		 <&tegra_car TEGRA124_CLK_HDA2HDMI>,
-		 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
-	clock-names = "hda", "hda2hdmi", "hda2codec_2x";
-	resets = <&tegra_car 125>, /* hda */
-		 <&tegra_car 128>, /* hda2hdmi */
-		 <&tegra_car 111>; /* hda2codec_2x */
-	reset-names = "hda", "hda2hdmi", "hda2codec_2x";
-	nvidia,model = "jetson-tk1-hda";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml
new file mode 100644
index 000000000000..12c31b4b99e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra30-hda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra HDA controller
+
+description: |
+  The High Definition Audio (HDA) block provides a serial interface to
+  audio codec. It supports multiple input and output streams.
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^hda@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra30-hda
+      - items:
+          - enum:
+              - nvidia,tegra234-hda
+              - nvidia,tegra194-hda
+              - nvidia,tegra186-hda
+              - nvidia,tegra210-hda
+              - nvidia,tegra124-hda
+          - const: nvidia,tegra30-hda
+      - items:
+          - const: nvidia,tegra132-hda
+          - const: nvidia,tegra124-hda
+          - const: nvidia,tegra30-hda
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: The interrupt from the HDA controller
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hda
+      - const: hda2hdmi
+      - const: hda2codec_2x
+
+  resets:
+    minItems: 2
+    maxItems: 3
+
+  reset-names:
+    minItems: 2
+    items:
+      - const: hda
+      - const: hda2hdmi
+      - const: hda2codec_2x
+
+  power-domains:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  nvidia,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      The user-visible name of this sound complex. If this property is
+      not specified then boards can use default name provided in hda driver.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra124-car-common.h>
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    hda@70030000 {
+        compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
+        reg = <0x70030000 0x10000>;
+        interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_HDA>,
+                 <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+                 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
+        clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+        resets = <&tegra_car 125>, /* hda */
+                 <&tegra_car 128>, /* hda2hdmi */
+                 <&tegra_car 111>; /* hda2codec_2x */
+        reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+        nvidia,model = "jetson-tk1-hda";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
new file mode 100644
index 000000000000..7f2e68ff6d34
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nxp,tfa989x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP/Goodix TFA989X (TFA1) Audio Amplifiers
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nxp,tfa9890
+      - nxp,tfa9895
+      - nxp,tfa9897
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  rcv-gpios:
+    description: optional GPIO to be asserted when receiver mode is enabled.
+
+  sound-name-prefix: true
+
+  vddd-supply:
+    description: regulator phandle for the VDDD power supply.
+
+if:
+  not:
+    properties:
+      compatible:
+        const: nxp,tfa9897
+then:
+  properties:
+    rcv-gpios: false
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      audio-codec@34 {
+        compatible = "nxp,tfa9895";
+        reg = <0x34>;
+        sound-name-prefix = "Speaker Left";
+        #sound-dai-cells = <0>;
+      };
+      audio-codec@36 {
+        compatible = "nxp,tfa9895";
+        reg = <0x36>;
+        sound-name-prefix = "Speaker Right";
+        #sound-dai-cells = <0>;
+      };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      speaker_codec_top: audio-codec@34 {
+        compatible = "nxp,tfa9897";
+        reg = <0x34>;
+        vddd-supply = <&pm8916_l6>;
+        rcv-gpios = <&msmgpio 50 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&speaker_top_default>;
+        sound-name-prefix = "Speaker Top";
+        #sound-dai-cells = <0>;
+      };
+
+      speaker_codec_bottom: audio-codec@36 {
+        compatible = "nxp,tfa9897";
+        reg = <0x36>;
+        vddd-supply = <&pm8916_l6>;
+        rcv-gpios = <&msmgpio 111 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&speaker_bottom_default>;
+        sound-name-prefix = "Speaker Bottom";
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
deleted file mode 100644
index 84b28dbe9f15..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-* Qualcomm Technologies APQ8016 SBC ASoC machine driver
-
-This node models the Qualcomm Technologies APQ8016 SBC ASoC machine driver
-
-Required properties:
-
-- compatible		: "qcom,apq8016-sbc-sndcard"
-
-- pinctrl-N		: One property must exist for each entry in
-			  pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
-			  for details of the property values.
-- pinctrl-names		: Must contain a "default" entry.
-- reg			: Must contain an address for each entry in reg-names.
-- reg-names		: A list which must include the following entries:
-				* "mic-iomux"
-				* "spkr-iomux"
-- qcom,model		: Name of the sound card.
-
-- qcom,audio-routing	: A list of the connections between audio components.
-			  Each entry is a pair of strings, the first being the
-			  connection's sink, the second being the connection's
-			  source. Valid names could be power supplies, MicBias
-			  of msm8x16_wcd codec and the jacks on the board:
-
-			  Power supplies:
-			  * MIC BIAS External1
-			  * MIC BIAS External2
-			  * MIC BIAS Internal1
-			  * MIC BIAS Internal2
-
-			  Board connectors:
-			  * Headset Mic
-			  * Secondary Mic
-			  * DMIC
-			  * Ext Spk
-
-Dai-link subnode properties and subnodes:
-
-Required dai-link subnodes:
-
-- cpu					: CPU   sub-node
-- codec					: CODEC sub-node
-
-Required CPU/CODEC subnodes properties:
-
--link-name		: Name of the dai link.
--sound-dai		: phandle/s and port of CPU/CODEC
-
-Example:
-
-sound: sound {
-	compatible = "qcom,apq8016-sbc-sndcard";
-	reg = <0x07702000 0x4>, <0x07702004 0x4>;
-	reg-names = "mic-iomux", "spkr-iomux";
-	qcom,model = "DB410c";
-
-	qcom,audio-routing =
-		"MIC BIAS External1", "Handset Mic",
-		"MIC BIAS Internal2", "Headset Mic",
-		"MIC BIAS External1", "Secondary Mic",
-		"AMIC1", "MIC BIAS External1",
-		"AMIC2", "MIC BIAS Internal2",
-		"AMIC3", "MIC BIAS External1",
-		"DMIC1", "MIC BIAS Internal1",
-		"MIC BIAS Internal1", "Digital Mic1",
-		"DMIC2", "MIC BIAS Internal1",
-		"MIC BIAS Internal1", "Digital Mic2";
-
-	/* I2S - Internal codec */
-	internal-dai-link@0 {
-		cpu { /* PRIMARY */
-			sound-dai = <&lpass MI2S_PRIMARY>;
-		};
-		codec {
-			sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
-		};
-	};
-
-	/* External Primary or External Secondary -ADV7533 HDMI */
-	external-dai-link@0 {
-		link-name = "ADV7533";
-		cpu { /* QUAT */
-			sound-dai = <&lpass MI2S_QUATERNARY>;
-		};
-		codec {
-			sound-dai = <&adv_bridge 0>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
index c814e867850f..e1b9fa8a5bf8 100644
--- a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
@@ -55,6 +55,14 @@ This binding describes the APQ8096 sound card, which uses qdsp for audio.
 	Value type: <stringlist>
 	Definition: The user-visible name of this sound card.
 
+- aux-devs
+	Usage: optional
+	Value type: <array of phandles>
+	Definition: A list of phandles for auxiliary devices (e.g. analog
+		    amplifiers) that do not appear directly within the DAI
+		    links. Should be connected to another audio component
+		    using "audio-routing".
+
 = dailinks
 Each subnode of sndcard represents either a dailink, and subnodes of each
 dailinks would be cpu/codec/platform dais.
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
deleted file mode 100644
index 21c648328be9..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Qualcomm Technologies LPASS CPU DAI
-
-This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
-
-Required properties:
-
-- compatible		: "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu"
-- clocks		: Must contain an entry for each entry in clock-names.
-- clock-names		: A list which must include the following entries:
-				* "ahbix-clk"
-				* "mi2s-osr-clk"
-				* "mi2s-bit-clk"
-			: required clocks for "qcom,lpass-cpu-apq8016"
-				* "ahbix-clk"
-				* "mi2s-bit-clk0"
-				* "mi2s-bit-clk1"
-				* "mi2s-bit-clk2"
-				* "mi2s-bit-clk3"
-				* "pcnoc-mport-clk"
-				* "pcnoc-sway-clk"
-
-- interrupts		: Must contain an entry for each entry in
-			  interrupt-names.
-- interrupt-names	: A list which must include the following entries:
-				* "lpass-irq-lpaif"
-- pinctrl-N		: One property must exist for each entry in
-			  pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
-			  for details of the property values.
-- pinctrl-names		: Must contain a "default" entry.
-- reg			: Must contain an address for each entry in reg-names.
-- reg-names		: A list which must include the following entries:
-				* "lpass-lpaif"
-
-
-
-Optional properties:
-
-- qcom,adsp		: Phandle for the audio DSP node
-
-Example:
-
-lpass@28100000 {
-	compatible = "qcom,lpass-cpu";
-	clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
-	clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
-	interrupts = <0 85 1>;
-	interrupt-names = "lpass-irq-lpaif";
-	pinctrl-names = "default", "idle";
-	pinctrl-0 = <&mi2s_default>;
-	pinctrl-1 = <&mi2s_idle>;
-	reg = <0x28100000 0x10000>;
-	reg-names = "lpass-lpaif";
-	qcom,adsp = <&adsp>;
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
new file mode 100644
index 000000000000..ef18a572a1ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -0,0 +1,293 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Rohit kumar <rohitkr@codeaurora.org>
+
+description: |
+  Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist
+  of MI2S interface for audio data transfer on external codecs. LPASS cpu driver
+  is a module to configure Low-Power Audio Interface(LPAIF) core registers
+  across different IP versions.
+
+properties:
+  compatible:
+    enum:
+      - qcom,lpass-cpu
+      - qcom,apq8016-lpass-cpu
+      - qcom,sc7180-lpass-cpu
+      - qcom,sc7280-lpass-cpu
+
+  reg:
+    minItems: 1
+    maxItems: 6
+    description: LPAIF core registers
+
+  reg-names:
+    minItems: 1
+    maxItems: 6
+
+  clocks:
+    minItems: 3
+    maxItems: 7
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description: LPAIF DMA buffer interrupt
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 4
+
+  qcom,adsp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle for the audio DSP node
+
+  iommus:
+    minItems: 2
+    maxItems: 3
+    description: Phandle to apps_smmu node with sid mask
+
+  power-domains:
+    maxItems: 1
+
+  power-domain-names:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^dai-link@[0-9a-f]$":
+    type: object
+    description: |
+      LPASS CPU dai node for each I2S device or Soundwire device. Bindings of each node
+      depends on the specific driver providing the functionality and
+      properties.
+    properties:
+      reg:
+        maxItems: 1
+        description: Must be one of the DAI ID
+
+      qcom,playback-sd-lines:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: list of MI2S data lines for playback
+
+      qcom,capture-sd-lines:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: list of MI2S data lines for capture
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: ahbix-clk
+            - const: mi2s-osr-clk
+            - const: mi2s-bit-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,apq8016-lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: ahbix-clk
+            - const: mi2s-bit-clk0
+            - const: mi2s-bit-clk1
+            - const: mi2s-bit-clk2
+            - const: mi2s-bit-clk3
+            - const: pcnoc-mport-clk
+            - const: pcnoc-sway-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7180-lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          oneOf:
+            - items:   #for I2S
+                - const: pcnoc-sway-clk
+                - const: audio-core
+                - const: mclk0
+                - const: pcnoc-mport-clk
+                - const: mi2s-bit-clk0
+                - const: mi2s-bit-clk1
+            - items:   #for HDMI
+                - const: pcnoc-sway-clk
+                - const: audio-core
+                - const: pcnoc-mport-clk
+        reg-names:
+          anyOf:
+            - items:   #for I2S
+                - const: lpass-lpaif
+            - items:   #for I2S and HDMI
+                - const: lpass-hdmiif
+                - const: lpass-lpaif
+        interrupt-names:
+          anyOf:
+            - items:   #for I2S
+                - const: lpass-irq-lpaif
+            - items:   #for I2S and HDMI
+                - const: lpass-irq-lpaif
+                - const: lpass-irq-hdmi
+      required:
+        - iommus
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7280-lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          oneOf:
+            - items:   #for I2S
+                - const: aon_cc_audio_hm_h
+                - const: audio_cc_ext_mclk0
+                - const: core_cc_sysnoc_mport_core
+                - const: core_cc_ext_if0_ibit
+                - const: core_cc_ext_if1_ibit
+            - items:   #for Soundwire
+                - const: aon_cc_audio_hm_h
+                - const: audio_cc_codec_mem
+                - const: audio_cc_codec_mem0
+                - const: audio_cc_codec_mem1
+                - const: audio_cc_codec_mem2
+                - const: aon_cc_va_mem0
+            - items:   #for HDMI
+                - const: core_cc_sysnoc_mport_core
+
+        reg-names:
+          anyOf:
+            - items:   #for I2S
+                - const: lpass-lpaif
+            - items:   #for I2S and HDMI
+                - const: lpass-hdmiif
+                - const: lpass-lpaif
+            - items:   #for I2S, soundwire and HDMI
+                - const: lpass-hdmiif
+                - const: lpass-lpaif
+                - const: lpass-rxtx-cdc-dma-lpm
+                - const: lpass-rxtx-lpaif
+                - const: lpass-va-lpaif
+                - const: lpass-va-cdc-dma-lpm
+        interrupt-names:
+          anyOf:
+            - items:   #for I2S
+                - const: lpass-irq-lpaif
+            - items:   #for I2S and HDMI
+                - const: lpass-irq-lpaif
+                - const: lpass-irq-hdmi
+            - items:   #for I2S, soundwire and HDMI
+                - const: lpass-irq-lpaif
+                - const: lpass-irq-hdmi
+                - const: lpass-irq-vaif
+                - const: lpass-irq-rxtxif
+        power-domain-names:
+          allOf:
+            - items:
+                - const: lcx
+
+      required:
+        - iommus
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/sound/sc7180-lpass.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        lpass@62d80000 {
+            compatible = "qcom,sc7180-lpass-cpu";
+
+            reg = <0 0x62d87000 0 0x68000>,
+                  <0 0x62f00000 0 0x29000>;
+            reg-names = "lpass-hdmiif",
+                        "lpass-lpaif";
+            iommus = <&apps_smmu 0x1020 0>,
+                     <&apps_smmu 0x1032 0>;
+            power-domains = <&lpass_hm 0>;
+
+            clocks = <&gcc 131>,
+                 <&lpasscorecc 6>,
+                 <&lpasscorecc 7>,
+                 <&lpasscorecc 10>,
+                 <&lpasscorecc 8>,
+                 <&lpasscorecc 9>;
+
+            clock-names = "pcnoc-sway-clk", "audio-core",
+                          "mclk0", "pcnoc-mport-clk",
+                          "mi2s-bit-clk0", "mi2s-bit-clk1";
+
+            interrupts = <0 160 1>,
+                         <0 268 1>;
+            interrupt-names = "lpass-irq-lpaif",
+                              "lpass-irq-hdmi";
+            #sound-dai-cells = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+            /* Optional to set different MI2S SD lines */
+            dai-link@0 {
+                reg = <MI2S_PRIMARY>;
+                qcom,playback-sd-lines = <1>;
+                qcom,capture-sd-lines = <0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
new file mode 100644
index 000000000000..1de11e7f33bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-rx-macro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS(Low Power Audio Subsystem) RX Macro audio codec DT bindings
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-lpass-rx-macro
+      - qcom,sm8250-lpass-rx-macro
+      - qcom,sm8450-lpass-rx-macro
+      - qcom,sc8280xp-lpass-rx-macro
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    oneOf:
+      - items:   #for ADSP based platforms
+          - const: mclk
+          - const: npl
+          - const: macro
+          - const: dcodec
+          - const: fsgen
+      - items:   #for ADSP bypass based platforms
+          - const: mclk
+          - const: npl
+          - const: fsgen
+
+  clock-output-names:
+    items:
+      - const: mclk
+
+  power-domains:
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: macro
+      - const: dcodec
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    codec@3200000 {
+      compatible = "qcom,sm8250-lpass-rx-macro";
+      reg = <0x3200000 0x1000>;
+      #sound-dai-cells = <1>;
+      #clock-cells = <0>;
+      clocks = <&audiocc 0>,
+               <&audiocc 1>,
+               <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&vamacro>;
+      clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+      clock-output-names = "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
new file mode 100644
index 000000000000..de8297b358e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-tx-macro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS(Low Power Audio Subsystem) TX Macro audio codec DT bindings
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-lpass-tx-macro
+      - qcom,sm8250-lpass-tx-macro
+      - qcom,sm8450-lpass-tx-macro
+      - qcom,sc8280xp-lpass-tx-macro
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    oneOf:
+      - items:   #for ADSP based platforms
+          - const: mclk
+          - const: npl
+          - const: macro
+          - const: dcodec
+          - const: fsgen
+      - items:   #for ADSP bypass based platforms
+          - const: mclk
+          - const: npl
+          - const: fsgen
+
+  clock-output-names:
+    items:
+      - const: mclk
+
+  power-domains:
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: macro
+      - const: dcodec
+
+  qcom,dmic-sample-rate:
+    description: dmic sample rate
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    codec@3220000 {
+      compatible = "qcom,sm8250-lpass-tx-macro";
+      reg = <0x3220000 0x1000>;
+      #sound-dai-cells = <1>;
+      #clock-cells = <0>;
+      clocks = <&aoncc 0>,
+               <&aoncc 1>,
+               <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&vamacro>;
+      clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+      clock-output-names = "mclk";
+      qcom,dmic-sample-rate = <600000>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
new file mode 100644
index 000000000000..9f473c08cb2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-va-macro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS(Low Power Audio Subsystem) VA Macro audio codec DT bindings
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-lpass-va-macro
+      - qcom,sm8250-lpass-va-macro
+      - qcom,sm8450-lpass-va-macro
+      - qcom,sc8280xp-lpass-va-macro
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:   #for ADSP based platforms
+          - const: mclk
+          - const: core
+          - const: dcodec
+      - items:   #for ADSP bypass based platforms
+          - const: mclk
+
+  clock-output-names:
+    items:
+      - const: fsgen
+
+  power-domains:
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: macro
+      - const: dcodec
+
+  qcom,dmic-sample-rate:
+    description: dmic sample rate
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  vdd-micb-supply:
+    description: phandle to voltage regulator of MIC Bias
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    codec@3370000 {
+      compatible = "qcom,sm8250-lpass-va-macro";
+      reg = <0x3370000 0x1000>;
+      #sound-dai-cells = <1>;
+      #clock-cells = <0>;
+      clocks = <&aoncc 0>,
+               <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+      clock-names = "mclk", "core", "dcodec";
+      clock-output-names = "fsgen";
+      qcom,dmic-sample-rate = <600000>;
+      vdd-micb-supply = <&vreg_s4a_1p8>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
new file mode 100644
index 000000000000..4959ad658eac
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-wsa-macro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS(Low Power Audio Subsystem) VA Macro audio codec DT bindings
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-lpass-wsa-macro
+      - qcom,sm8250-lpass-wsa-macro
+      - qcom,sm8450-lpass-wsa-macro
+      - qcom,sc8280xp-lpass-wsa-macro
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: npl
+      - const: macro
+      - const: dcodec
+      - const: fsgen
+
+  clock-output-names:
+    items:
+      - const: mclk
+
+  qcom,dmic-sample-rate:
+    description: dmic sample rate
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  vdd-micb-supply:
+    description: phandle to voltage regulator of MIC Bias
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    codec@3240000 {
+      compatible = "qcom,sm8250-lpass-wsa-macro";
+      reg = <0x3240000 0x1000>;
+      #sound-dai-cells = <1>;
+      #clock-cells = <0>;
+      clocks = <&audiocc 1>,
+               <&audiocc 0>,
+               <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&vamacro>;
+      clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+      clock-output-names = "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml
new file mode 100644
index 000000000000..d0f7a79e240a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6adm-routing.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Device Manager (Q6ADM) routing
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Qualcomm Audio Device Manager (Q6ADM) routing node represents routing
+  specific configuration.
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6adm-routing
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    #include <dt-bindings/sound/qcom,q6asm.h>
+
+    apr {
+        compatible = "qcom,apr-v2";
+        qcom,domain = <APR_DOMAIN_ADSP>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@8 {
+            compatible = "qcom,q6adm";
+            reg = <APR_SVC_ADM>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            routing {
+                compatible = "qcom,q6adm-routing";
+                #sound-dai-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
deleted file mode 100644
index bbae426cdfb1..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Qualcomm Audio Device Manager (Q6ADM) binding
-
-Q6ADM is one of the APR audio service on Q6DSP.
-Please refer to qcom,apr.txt for details of the coommon apr service bindings
-used by the apr service device.
-
-- but must contain the following property:
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6adm-v<MAJOR-NUMBER>.<MINOR-NUMBER>".
-		   Or "qcom,q6adm" where the version number can be queried
-		   from DSP.
-		   example "qcom,q6adm-v2.0"
-
-
-= ADM routing
-"routing" subnode of the ADM node represents adm routing specific configuration
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6adm-routing".
-
-- #sound-dai-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 0
-
-= EXAMPLE
-q6adm@8 {
-	compatible = "qcom,q6adm";
-	reg = <APR_SVC_ADM>;
-	q6routing: routing {
-		compatible = "qcom,q6adm-routing";
-		#sound-dai-cells = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
deleted file mode 100644
index d74888b9f1bb..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ /dev/null
@@ -1,178 +0,0 @@
-Qualcomm Audio Front End (Q6AFE) binding
-
-AFE is one of the APR audio service on Q6DSP
-Please refer to qcom,apr.txt for details of the common apr service bindings
-used by all apr services. Must contain the following properties.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6afe-v<MAJOR-NUMBER>.<MINOR-NUMBER>"
-		  Or "qcom,q6afe" where the version number can be queried
-		  from DSP.
-		  example "qcom,q6afe"
-
-= AFE DAIs (Digial Audio Interface)
-"dais" subnode of the AFE node. It represents afe dais, each afe dai is a
-subnode of "dais" representing board specific dai setup.
-"dais" node should have following properties followed by dai children.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6afe-dais"
-
-- #sound-dai-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 1
-
-- #address-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 1
-
-- #size-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 0
-
-== AFE DAI is subnode of "dais" and represent a dai, it includes board specific
-configuration of each dai. Must contain the following properties.
-
-- reg
-	Usage: required
-	Value type: <u32>
-	Definition: Must be dai id
-
-- qcom,sd-lines
-	Usage: required for mi2s interface
-	Value type: <prop-encoded-array>
-	Definition: Must be list of serial data lines used by this dai.
-	should be one or more of the 0-3 sd lines.
-
- - qcom,tdm-sync-mode:
-	Usage: required for tdm interface
-	Value type: <prop-encoded-array>
-	Definition: Synchronization mode.
-		0 - Short sync bit mode
-		1 - Long sync mode
-		2 - Short sync slot mode
-
- - qcom,tdm-sync-src:
-	Usage: required for tdm interface
-	Value type: <prop-encoded-array>
-	Definition: Synchronization source.
-		0 - External source
-		1 - Internal source
-
- - qcom,tdm-data-out:
-	Usage: required for tdm interface
-	Value type: <prop-encoded-array>
-	Definition: Data out signal to drive with other masters.
-		0 - Disable
-		1 - Enable
-
- - qcom,tdm-invert-sync:
-	Usage: required for tdm interface
-	Value type: <prop-encoded-array>
-	Definition: Invert the sync.
-		0 - Normal
-		1 - Invert
-
- - qcom,tdm-data-delay:
-	Usage: required for tdm interface
-	Value type: <prop-encoded-array>
-	Definition: Number of bit clock to delay data
-		with respect to sync edge.
-		0 - 0 bit clock cycle
-		1 - 1 bit clock cycle
-		2 - 2 bit clock cycle
-
- - qcom,tdm-data-align:
-	Usage: required for tdm interface
-	Value type: <prop-encoded-array>
-	Definition: Indicate how data is packed
-		within the slot. For example, 32 slot width in case of
-		sample bit width is 24.
-		0 - MSB
-		1 - LSB
-
-= EXAMPLE
-
-q6afe@4 {
-	compatible = "qcom,q6afe";
-	reg = <APR_SVC_AFE>;
-
-	dais {
-		compatible = "qcom,q6afe-dais";
-		#sound-dai-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hdmi@1 {
-			reg = <1>;
-		};
-
-		tdm@24 {
-			reg = <24>;
-			qcom,tdm-sync-mode = <1>:
-			qcom,tdm-sync-src = <1>;
-			qcom,tdm-data-out = <0>;
-			qcom,tdm-invert-sync = <1>;
-			qcom,tdm-data-delay = <1>;
-			qcom,tdm-data-align = <0>;
-
-		};
-
-		tdm@25 {
-			reg = <25>;
-			qcom,tdm-sync-mode = <1>:
-			qcom,tdm-sync-src = <1>;
-			qcom,tdm-data-out = <0>;
-			qcom,tdm-invert-sync = <1>;
-			qcom,tdm-data-delay <1>:
-			qcom,tdm-data-align = <0>;
-		};
-
-		prim-mi2s-rx@16 {
-			reg = <16>;
-			qcom,sd-lines = <0 2>;
-		};
-
-		prim-mi2s-tx@17 {
-			reg = <17>;
-			qcom,sd-lines = <1>;
-		};
-
-		sec-mi2s-rx@18 {
-			reg = <18>;
-			qcom,sd-lines = <0 3>;
-		};
-
-		sec-mi2s-tx@19 {
-			reg = <19>;
-			qcom,sd-lines = <1>;
-		};
-
-		tert-mi2s-rx@20 {
-			reg = <20>;
-			qcom,sd-lines = <1 3>;
-		};
-
-		tert-mi2s-tx@21 {
-			reg = <21>;
-			qcom,sd-lines = <0>;
-		};
-
-		quat-mi2s-rx@22 {
-			reg = <22>;
-			qcom,sd-lines = <0>;
-		};
-
-		quat-mi2s-tx@23 {
-			reg = <23>;
-			qcom,sd-lines = <1>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
new file mode 100644
index 000000000000..24f7bf2bfd95
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Audio Process Manager Digital Audio Interfaces binding
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm APM DAIs in DSP
+
+properties:
+  compatible:
+    const: qcom,q6apm-dais
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+    gpr {
+        compatible = "qcom,gpr";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+
+        service@1 {
+            compatible = "qcom,q6apm";
+            reg = <1>;
+
+            dais {
+                compatible = "qcom,q6apm-dais";
+                iommus = <&apps_smmu 0x1801 0x0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml
new file mode 100644
index 000000000000..8deb8ffb143b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6asm-dais.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Stream Manager (Q6ASM)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Q6ASM is one of the APR audio services on Q6DSP. Each of its subnodes
+  represent a dai with board specific configuration.
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6asm-dais
+
+  iommus:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^dai@[0-9]+$":
+    type: object
+    description:
+      Q6ASM Digital Audio Interface
+
+    properties:
+      reg:
+        maxItems: 1
+
+      direction:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        description: |
+          The direction of the dai stream::
+           - Q6ASM_DAI_TX_RX (0) for both tx and rx
+           - Q6ASM_DAI_TX (1) for only tx (Capture/Encode)
+           - Q6ASM_DAI_RX (2) for only rx (Playback/Decode)
+
+      is-compress-dai:
+        type: boolean
+        description:
+          Compress offload dai.
+
+    dependencies:
+      is-compress-dai: ["direction"]
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    #include <dt-bindings/sound/qcom,q6asm.h>
+
+    apr {
+        compatible = "qcom,apr-v2";
+        qcom,domain = <APR_DOMAIN_ADSP>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@7 {
+            compatible = "qcom,q6asm";
+            reg = <APR_SVC_ASM>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            dais {
+                compatible = "qcom,q6asm-dais";
+                iommus = <&apps_smmu 0x1821 0x0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #sound-dai-cells = <1>;
+
+                dai@0 {
+                    reg = <0>;
+                };
+
+                dai@1 {
+                    reg = <1>;
+                };
+
+                dai@2 {
+                    reg = <2>;
+                    is-compress-dai;
+                    direction = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
deleted file mode 100644
index 9f5378c51686..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Qualcomm Audio Stream Manager (Q6ASM) binding
-
-Q6ASM is one of the APR audio service on Q6DSP.
-Please refer to qcom,apr.txt for details of the common apr service bindings
-used by the apr service device.
-
-- but must contain the following property:
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6asm-v<MAJOR-NUMBER>.<MINOR-NUMBER>".
-		    Or "qcom,q6asm" where the version number can be queried
-		    from DSP.
-		    example "qcom,q6asm-v2.0"
-
-= ASM DAIs (Digial Audio Interface)
-"dais" subnode of the ASM node represents dai specific configuration
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6asm-dais".
-
-- #sound-dai-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 1
-
-== ASM DAI is subnode of "dais" and represent a dai, it includes board specific
-configuration of each dai. Must contain the following properties.
-
-- reg
-	Usage: required
-	Value type: <u32>
-	Definition: Must be dai id
-
-- direction:
-	Usage: Required for Compress offload dais
-	Value type: <u32>
-	Definition: Specifies the direction of the dai stream
-			0 for both tx and rx
-			1 for only tx (Capture/Encode)
-			2 for only rx (Playback/Decode)
-
-- is-compress-dai:
-	Usage: Required for Compress offload dais
-	Value type: <boolean>
-	Definition: present for Compress offload dais
-
-
-= EXAMPLE
-
-q6asm@7 {
-	compatible = "qcom,q6asm";
-	reg = <APR_SVC_ASM>;
-	q6asmdai: dais {
-		compatible = "qcom,q6asm-dais";
-		#sound-dai-cells = <1>;
-		mm@0 {
-			reg = <0>;
-			direction = <2>;
-			is-compress-dai;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
deleted file mode 100644
index 7f36ff8bec18..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,q6core.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Qualcomm ADSP Core service binding
-
-Q6CORE is one of the APR audio service on Q6DSP.
-Please refer to qcom,apr.txt for details of the common apr service bindings
-used by the apr service device.
-
-- but must contain the following property:
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6core-v<MAJOR-NUMBER>.<MINOR-NUMBER>".
-		   Or "qcom,q6core" where the version number can be queried
-		   from DSP.
-		   example "qcom,q6core-v2.0"
-
-= EXAMPLE
-q6core@3 {
-	compatible = "qcom,q6core";
-	reg = <APR_SVC_ADSP_CORE>;
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
new file mode 100644
index 000000000000..fd567d20417d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm DSP LPASS Clock Controller binding
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm DSP Clock Controller
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6afe-clocks
+      - qcom,q6prm-lpass-clocks
+
+  '#clock-cells':
+    const: 2
+    description:
+      Clock Id is followed by clock coupling attributes.
+        1 = for no coupled clock
+        2 = for dividend of the coupled clock
+        3 = for divisor of the coupled clock
+        4 = for inverted and no couple clock
+
+required:
+  - compatible
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    apr {
+        compatible = "qcom,apr-v2";
+        qcom,domain = <APR_DOMAIN_ADSP>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@4 {
+            compatible = "qcom,q6afe";
+            reg = <APR_SVC_AFE>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            clock-controller {
+                compatible = "qcom,q6afe-clocks";
+                #clock-cells = <2>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+    gpr {
+        compatible = "qcom,gpr";
+        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@2 {
+            reg = <GPR_PRM_MODULE_IID>;
+            compatible = "qcom,q6prm";
+
+            clock-controller {
+                compatible = "qcom,q6prm-lpass-clocks";
+                #clock-cells = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
new file mode 100644
index 000000000000..e53fc0960a14
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
@@ -0,0 +1,203 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports binding
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm DSP LPASS Audio ports
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6afe-dais
+      - qcom,q6apm-lpass-dais
+
+  '#sound-dai-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+#Digital Audio Interfaces
+patternProperties:
+  '^dai@[0-9]+$':
+    type: object
+    description:
+      Q6DSP Digital Audio Interfaces.
+
+    properties:
+      reg:
+        description:
+          Digital Audio Interface ID
+
+      qcom,sd-lines:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          List of serial data lines used by this dai.should be one or more of the 0-3 sd lines.
+        minItems: 1
+        maxItems: 4
+        uniqueItems: true
+        items:
+          minimum: 0
+          maximum: 3
+
+      qcom,tdm-sync-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        description:
+          TDM Synchronization mode
+            0 = Short sync bit mode
+            1 = Long sync mode
+            2 = Short sync slot mode
+
+      qcom,tdm-sync-src:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description:
+          TDM Synchronization source
+            0 = External source
+            1 = Internal source
+
+      qcom,tdm-data-out:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description:
+          TDM Data out signal to drive with other masters
+            0 = Disable
+            1 = Enable
+
+      qcom,tdm-invert-sync:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description:
+          TDM Invert the sync
+            0 = Normal
+            1 = Invert
+
+      qcom,tdm-data-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        description:
+          TDM Number of bit clock to delay data
+            0 = 0 bit clock cycle
+            1 = 1 bit clock cycle
+            2 = 2 bit clock cycle
+
+      qcom,tdm-data-align:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description:
+          Indicate how data is packed within the slot. For example, 32 slot
+          width in case of sample bit width is 24TDM Invert the sync.
+            0 = MSB
+            1 = LSB
+
+    required:
+      - reg
+
+    allOf:
+      - if:
+          properties:
+            reg:
+              contains:
+                # TDM DAI ID range from PRIMARY_TDM_RX_0 - QUINARY_TDM_TX_7
+                items:
+                  minimum: 24
+                  maximum: 103
+        then:
+          required:
+            - qcom,tdm-sync-mode
+            - qcom,tdm-sync-src
+            - qcom,tdm-data-out
+            - qcom,tdm-invert-sync
+            - qcom,tdm-data-delay
+            - qcom,tdm-data-align
+
+      - if:
+          properties:
+            reg:
+              contains:
+                # MI2S DAI ID range PRIMARY_MI2S_RX - QUATERNARY_MI2S_TX and
+                # QUINARY_MI2S_RX - QUINARY_MI2S_TX
+                items:
+                  oneOf:
+                    - minimum: 16
+                      maximum: 23
+                    - minimum: 127
+                      maximum: 128
+        then:
+          required:
+            - qcom,sd-lines
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    apr {
+        compatible = "qcom,apr-v2";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        qcom,domain = <APR_DOMAIN_ADSP>;
+
+        service@4 {
+            compatible = "qcom,q6afe";
+            reg = <APR_SVC_AFE>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            dais {
+                compatible = "qcom,q6afe-dais";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #sound-dai-cells = <1>;
+
+                dai@22 {
+                    reg = <QUATERNARY_MI2S_RX>;
+                    qcom,sd-lines = <0 1 2 3>;
+                };
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+    gpr {
+        compatible = "qcom,gpr";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+
+        service@1 {
+            compatible = "qcom,q6apm";
+            reg = <GPR_APM_MODULE_IID>;
+
+            dais {
+                compatible = "qcom,q6apm-lpass-dais";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #sound-dai-cells = <1>;
+
+                dai@22 {
+                    reg = <QUATERNARY_MI2S_RX>;
+                    qcom,sd-lines = <0 1 2 3>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt
deleted file mode 100644
index ca8c89e88bfa..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-* Qualcomm Technologies Inc. SDM845 ASoC sound card driver
-
-This binding describes the SDM845 sound card, which uses qdsp for audio.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be one of this
-			"qcom,sdm845-sndcard"
-			"qcom,db845c-sndcard"
-			"lenovo,yoga-c630-sndcard"
-
-- audio-routing:
-	Usage: Optional
-	Value type: <stringlist>
-	Definition:  A list of the connections between audio components.
-		  Each entry is a pair of strings, the first being the
-		  connection's sink, the second being the connection's
-		  source. Valid names could be power supplies, MicBias
-		  of codec and the jacks on the board.
-
-- model:
-	Usage: required
-	Value type: <stringlist>
-	Definition: The user-visible name of this sound card.
-
-= dailinks
-Each subnode of sndcard represents either a dailink, and subnodes of each
-dailinks would be cpu/codec/platform dais.
-
-- link-name:
-	Usage: required
-	Value type: <string>
-	Definition: User friendly name for dai link
-
-= CPU, PLATFORM, CODEC dais subnodes
-- cpu:
-	Usage: required
-	Value type: <subnode>
-	Definition: cpu dai sub-node
-
-- codec:
-	Usage: required
-	Value type: <subnode>
-	Definition: codec dai sub-node
-
-- platform:
-	Usage: Optional
-	Value type: <subnode>
-	Definition: platform dai sub-node
-
-- sound-dai:
-	Usage: required
-	Value type: <phandle>
-	Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node.
-
-Example:
-
-audio {
-	compatible = "qcom,sdm845-sndcard";
-	model = "sdm845-snd-card";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pri_mi2s_active &pri_mi2s_ws_active>;
-	pinctrl-1 = <&pri_mi2s_sleep &pri_mi2s_ws_sleep>;
-
-	mm1-dai-link {
-		link-name = "MultiMedia1";
-		cpu {
-			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
-		};
-	};
-
-	pri-mi2s-dai-link {
-		link-name = "PRI MI2S Playback";
-		cpu {
-			sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
new file mode 100644
index 000000000000..70080d04ddc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
@@ -0,0 +1,314 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc. ASoC sound card drivers
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  This bindings describes Qualcomm SoC based sound cards
+  which uses LPASS internal codec for audio.
+
+properties:
+  compatible:
+    enum:
+      - lenovo,yoga-c630-sndcard
+      - qcom,apq8016-sbc-sndcard
+      - qcom,db845c-sndcard
+      - qcom,msm8916-qdsp6-sndcard
+      - qcom,qrb5165-rb5-sndcard
+      - qcom,sc8280xp-sndcard
+      - qcom,sdm845-sndcard
+      - qcom,sm8250-sndcard
+      - qcom,sm8450-sndcard
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source. Valid names could be power supplies,
+      MicBias of codec and the jacks on the board.
+
+  aux-devs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      List of phandles pointing to auxiliary devices, such
+      as amplifiers, to be added to the sound card.
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User visible long sound card name
+
+  pin-switches:
+    description: List of widget names for which pin switches should be created.
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  widgets:
+    description: User specified audio sound widgets.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  # Only valid for some compatibles (see allOf if below)
+  reg: true
+  reg-names: true
+
+patternProperties:
+  ".*-dai-link$":
+    description:
+      Each subnode represents a dai link. Subnodes of each dai links would be
+      cpu/codec dais.
+
+    type: object
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name.
+        $ref: /schemas/types.yaml#/definitions/string
+        maxItems: 1
+
+      cpu:
+        description: Holds subnode which indicates cpu dai.
+        type: object
+        additionalProperties: false
+
+        properties:
+          sound-dai:
+            maxItems: 1
+
+      platform:
+        description: Holds subnode which indicates platform dai.
+        type: object
+        additionalProperties: false
+
+        properties:
+          sound-dai:
+            maxItems: 1
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        additionalProperties: false
+
+        properties:
+          sound-dai:
+            minItems: 1
+            maxItems: 4
+
+    required:
+      - link-name
+      - cpu
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - model
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,apq8016-sbc-sndcard
+              - qcom,msm8916-qdsp6-sndcard
+    then:
+      properties:
+        reg:
+          items:
+            - description: Microphone I/O mux register address
+            - description: Speaker I/O mux register address
+        reg-names:
+          items:
+            - const: mic-iomux
+            - const: spkr-iomux
+      required:
+        - compatible
+        - model
+        - reg
+        - reg-names
+    else:
+      properties:
+        reg: false
+        reg-names: false
+
+additionalProperties: false
+
+examples:
+
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    #include <dt-bindings/sound/qcom,q6asm.h>
+    sound {
+        compatible = "qcom,qrb5165-rb5-sndcard";
+        model = "Qualcomm-qrb5165-RB5-WSA8815-Speakers-DMIC0";
+        audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+                    "SpkrRight IN", "WSA_SPK2 OUT",
+                    "VA DMIC0", "vdd-micb",
+                    "VA DMIC1", "vdd-micb";
+
+        mm1-dai-link {
+            link-name = "MultiMedia0";
+            cpu {
+                sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+            };
+        };
+
+        mm2-dai-link {
+            link-name = "MultiMedia2";
+            cpu {
+                sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+            };
+        };
+
+        mm3-dai-link {
+            link-name = "MultiMedia3";
+            cpu {
+                sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+            };
+        };
+
+        hdmi-dai-link {
+            link-name = "HDMI Playback";
+            cpu {
+                sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
+            };
+
+            platform {
+                sound-dai = <&q6routing>;
+            };
+
+            codec {
+                sound-dai = <&lt9611_codec 0>;
+            };
+        };
+
+        wsa-dai-link {
+            link-name = "WSA Playback";
+            cpu {
+                sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
+            };
+
+            platform {
+                sound-dai = <&q6routing>;
+            };
+
+            codec {
+                sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro>;
+            };
+        };
+
+        va-dai-link {
+            link-name = "VA Capture";
+            cpu {
+                sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
+            };
+
+            platform {
+                sound-dai = <&q6routing>;
+            };
+
+            codec {
+                sound-dai = <&vamacro 0>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/sound/qcom,lpass.h>
+    sound@7702000 {
+        compatible = "qcom,apq8016-sbc-sndcard";
+        reg = <0x07702000 0x4>, <0x07702004 0x4>;
+        reg-names = "mic-iomux", "spkr-iomux";
+
+        model = "DB410c";
+        audio-routing =
+            "AMIC2", "MIC BIAS Internal2",
+            "AMIC3", "MIC BIAS External1";
+
+        pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+        pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+        pinctrl-names = "default", "sleep";
+
+        quaternary-dai-link {
+            link-name = "ADV7533";
+            cpu {
+                sound-dai = <&lpass MI2S_QUATERNARY>;
+            };
+            codec {
+                sound-dai = <&adv_bridge 0>;
+            };
+        };
+
+        primary-dai-link {
+            link-name = "WCD";
+            cpu {
+                sound-dai = <&lpass MI2S_PRIMARY>;
+            };
+            codec {
+                sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+            };
+        };
+
+        tertiary-dai-link {
+            link-name = "WCD-Capture";
+            cpu {
+                sound-dai = <&lpass MI2S_TERTIARY>;
+            };
+            codec {
+                sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    #include <dt-bindings/sound/qcom,q6asm.h>
+    sound@7702000 {
+        compatible = "qcom,msm8916-qdsp6-sndcard";
+        reg = <0x07702000 0x4>, <0x07702004 0x4>;
+        reg-names = "mic-iomux", "spkr-iomux";
+
+        model = "msm8916";
+        widgets =
+            "Speaker", "Speaker",
+            "Headphone", "Headphones";
+        pin-switches = "Speaker";
+        audio-routing =
+            "Speaker", "Speaker Amp OUT",
+            "Speaker Amp IN", "HPH_R",
+            "Headphones", "HPH_L",
+            "Headphones", "HPH_R",
+            "AMIC1", "MIC BIAS Internal1",
+            "AMIC2", "MIC BIAS Internal2",
+            "AMIC3", "MIC BIAS Internal3";
+        aux-devs = <&speaker_amp>;
+
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&cdc_pdm_lines_act>;
+        pinctrl-1 = <&cdc_pdm_lines_sus>;
+
+        mm1-dai-link {
+            link-name = "MultiMedia1";
+            cpu {
+                sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+            };
+        };
+
+        primary-dai-link {
+            link-name = "Primary MI2S";
+            cpu {
+                sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+            };
+            platform {
+                sound-dai = <&q6routing>;
+            };
+            codec {
+                sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
index 38eaf0c028f9..8ca19f2b0b3d 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
@@ -77,6 +77,31 @@ properties:
     minimum: 1800000
     maximum: 2850000
 
+  qcom,hphl-jack-type-normally-closed:
+    description: Indicates that HPHL jack switch type is normally closed
+    type: boolean
+
+  qcom,ground-jack-type-normally-closed:
+    description: Indicates that Headset Ground switch type is normally closed
+    type: boolean
+
+  qcom,mbhc-headset-vthreshold-microvolt:
+    description: Voltage threshold value for headset detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-headphone-vthreshold-microvolt:
+    description: Voltage threshold value for headphone detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-buttons-vthreshold-microvolt:
+    description:
+      Array of 8 Voltage threshold values corresponding to headset
+      button0 - button7
+    minItems: 8
+    maxItems: 8
+
   clock-output-names:
     const: mclk
 
@@ -102,8 +127,7 @@ properties:
 
   gpio@42:
     type: object
-    allOf:
-      - $ref: ../gpio/qcom,wcd934x-gpio.yaml#
+    $ref: /schemas/gpio/qcom,wcd934x-gpio.yaml#
 
 patternProperties:
   "^.*@[0-9a-f]+$":
@@ -139,6 +163,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: false
+
 examples:
   - |
     codec@1,0{
@@ -158,6 +184,11 @@ examples:
         qcom,micbias2-microvolt = <1800000>;
         qcom,micbias3-microvolt = <1800000>;
         qcom,micbias4-microvolt = <1800000>;
+        qcom,hphl-jack-type-normally-closed;
+        qcom,ground-jack-type-normally-closed;
+        qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+        qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+        qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
         clock-names = "extclk";
         clocks = <&rpmhcc 2>;
 
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
new file mode 100644
index 000000000000..49a267b306f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd938x-sdw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm SoundWire Slave devices on WCD9380/WCD9385
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire slave devices. This bindings is for the
+  slave devices.
+
+properties:
+  compatible:
+    const: sdw20217010d00
+
+  reg:
+    maxItems: 1
+
+  qcom,tx-port-mapping:
+    description: |
+      Specifies static port mapping between slave and master tx ports.
+      In the order of slave port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+
+  qcom,rx-port-mapping:
+    description: |
+      Specifies static port mapping between slave and master rx ports.
+      In the order of slave port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 5
+    maxItems: 5
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire@3210000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03210000 0x2000>;
+        wcd938x_rx: codec@0,4 {
+            compatible = "sdw20217010d00";
+            reg  = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5>;
+        };
+    };
+
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+        wcd938x_tx: codec@0,3 {
+            compatible = "sdw20217010d00";
+            reg  = <0 3>;
+            qcom,tx-port-mapping = <2 3 4 5>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
new file mode 100644
index 000000000000..51547190f709
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd938x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WCD9380/WCD9385 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire slave devices.
+
+properties:
+  compatible:
+    enum:
+      - qcom,wcd9380-codec
+      - qcom,wcd9385-codec
+
+  reset-gpios:
+    description: GPIO spec for reset line to use
+    maxItems: 1
+
+  us-euro-gpios:
+    description: GPIO spec for swapping gnd and mic segments
+    maxItems: 1
+
+  vdd-buck-supply:
+    description: A reference to the 1.8V buck supply
+
+  vdd-rxtx-supply:
+    description: A reference to the 1.8V rx supply
+
+  vdd-io-supply:
+    description: A reference to the 1.8V I/O supply
+
+  vdd-mic-bias-supply:
+    description: A reference to the 3.8V mic bias supply
+
+  qcom,tx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire tx device phandle
+
+  qcom,rx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire rx device phandle
+
+  qcom,micbias1-microvolt:
+    description: micbias1 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias2-microvolt:
+    description: micbias2 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias3-microvolt:
+    description: micbias3 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias4-microvolt:
+    description: micbias4 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,hphl-jack-type-normally-closed:
+    description: Indicates that HPHL jack switch type is normally closed
+    type: boolean
+
+  qcom,ground-jack-type-normally-closed:
+    description: Indicates that Headset Ground switch type is normally closed
+    type: boolean
+
+  qcom,mbhc-headset-vthreshold-microvolt:
+    description: Voltage threshold value for headset detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-headphone-vthreshold-microvolt:
+    description: Voltage threshold value for headphone detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-buttons-vthreshold-microvolt:
+    description:
+      Array of 8 Voltage threshold values corresponding to headset
+      button0 - button7
+    minItems: 8
+    maxItems: 8
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reset-gpios
+  - qcom,tx-device
+  - qcom,rx-device
+  - qcom,micbias1-microvolt
+  - qcom,micbias2-microvolt
+  - qcom,micbias3-microvolt
+  - qcom,micbias4-microvolt
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    codec {
+        compatible = "qcom,wcd9380-codec";
+        reset-gpios = <&tlmm 32 0>;
+        #sound-dai-cells = <1>;
+        qcom,tx-device = <&wcd938x_tx>;
+        qcom,rx-device = <&wcd938x_rx>;
+        qcom,micbias1-microvolt = <1800000>;
+        qcom,micbias2-microvolt = <1800000>;
+        qcom,micbias3-microvolt = <1800000>;
+        qcom,micbias4-microvolt = <1800000>;
+        qcom,hphl-jack-type-normally-closed;
+        qcom,ground-jack-type-normally-closed;
+        qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+        qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+    };
+
+    /* ... */
+
+    soundwire@3210000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03210000 0x2000>;
+        wcd938x_rx: codec@0,4 {
+            compatible = "sdw20217010d00";
+            reg  = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5>;
+        };
+    };
+
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+        wcd938x_tx: codec@0,3 {
+            compatible = "sdw20217010d00";
+            reg  = <0 3>;
+            qcom,tx-port-mapping = <2 3 4 5>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
new file mode 100644
index 000000000000..6113f65f2990
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa883x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for The Qualcomm WSA8830/WSA8832/WSA8835
+  smart speaker amplifier
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  WSA883X is the Qualcomm Aqstic smart speaker amplifier
+  Their primary operating mode uses a SoundWire digital audio
+  interface. This binding is for SoundWire interface.
+
+properties:
+  compatible:
+    const: sdw10217020200
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO spec for Powerdown/Shutdown line to use
+    maxItems: 1
+
+  vdd-supply:
+    description: VDD Supply for the Codec
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - powerdown-gpios
+  - "#thermal-sensor-cells"
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire-controller@3250000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x3250000 0x2000>;
+
+        speaker@0,1 {
+            compatible = "sdw10217020200";
+            reg = <0 1>;
+            powerdown-gpios = <&tlmm 1 0>;
+            vdd-supply = <&vreg_s10b_1p8>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+
+        speaker@0,2 {
+            compatible = "sdw10217020200";
+            reg = <0 2>;
+            powerdown-gpios = <&tlmm 89 0>;
+            vdd-supply = <&vreg_s10b_1p8>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
new file mode 100644
index 000000000000..1d73204451b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt1015p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek rt1015p codec devicetree bindings
+
+maintainers:
+  - Tzung-Bi Shih <tzungbi@google.com>
+
+description: |
+  Rt1015p is a rt1015 variant which does not support I2C and
+  only supports S24, 48kHz, 64FS.
+
+properties:
+  compatible:
+    enum:
+      - realtek,rt1015p
+      - realtek,rt1019p
+
+  sdb-gpios:
+    description:
+      GPIO used for shutdown control.
+      0 means shut down; 1 means power on.
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    rt1015p: rt1015p {
+        compatible = "realtek,rt1015p";
+        sdb-gpios = <&pio 175 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
new file mode 100644
index 000000000000..ca5b8987b749
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt5682s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek rt5682s codec devicetree bindings
+
+maintainers:
+  - Derek Fang <derek.fang@realtek.com>
+
+description: |
+  Rt5682s(ALC5682I-VS) is a rt5682i variant which supports I2C only.
+
+properties:
+  compatible:
+    const: realtek,rt5682s
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  interrupts:
+    maxItems: 1
+    description: The CODEC's interrupt output.
+
+  realtek,dmic1-data-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # dmic1 data is not used
+      - 1 # using GPIO2 pin as dmic1 data pin
+      - 2 # using GPIO5 pin as dmic1 data pin
+    description: |
+      Specify which GPIO pin be used as DMIC1 data pin.
+
+  realtek,dmic1-clk-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # dmic1 clk is not used
+      - 1 # using GPIO1 pin as dmic1 clock pin
+      - 2 # using GPIO3 pin as dmic1 clock pin
+    description: |
+      Specify which GPIO pin be used as DMIC1 clk pin.
+
+  realtek,jd-src:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # No JD is used
+      - 1 # using JD1 as JD source
+    description: |
+      Specify which JD source be used.
+
+  realtek,ldo1-en-gpios:
+    description: |
+      The GPIO that controls the CODEC's LDO1_EN pin.
+
+  realtek,dmic-clk-rate-hz:
+    description: |
+      Set the clock rate (hz) for the requirement of the particular DMIC.
+
+  realtek,dmic-delay-ms:
+    description: |
+      Set the delay time (ms) for the requirement of the particular DMIC.
+
+  realtek,amic-delay-ms:
+    description: |
+      Set the delay time (ms) for the requirement of the particular platform or AMIC.
+
+  realtek,dmic-clk-driving-high:
+    type: boolean
+    description: |
+      Set the high driving of the DMIC clock out.
+
+  clocks:
+    items:
+      - description: phandle and clock specifier for codec MCLK.
+
+  clock-names:
+    items:
+      - const: mclk
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    minItems: 2
+    maxItems: 2
+    description: Name given for DAI word clock and bit clock outputs.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "realtek,rt5682s";
+            reg = <0x1a>;
+            interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+            realtek,ldo1-en-gpios =
+                <&gpio 2 GPIO_ACTIVE_HIGH>;
+            realtek,dmic1-data-pin = <1>;
+            realtek,dmic1-clk-pin = <1>;
+            realtek,jd-src = <1>;
+
+            #clock-cells = <1>;
+            clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
+
+            clocks = <&osc>;
+            clock-names = "mclk";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
index 140a37fc3c0b..0dd3f7361399 100644
--- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/renesas,fsi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas FSI Sound Driver Device Tree Bindings
+title: Renesas FIFO-buffered Serial Interface (FSI)
 
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
@@ -17,16 +17,16 @@ properties:
     oneOf:
       # for FSI2 SoC
       - items:
-        - enum:
-          - renesas,fsi2-sh73a0
-          - renesas,fsi2-r8a7740
-        - enum:
-          - renesas,sh_fsi2
+          - enum:
+              - renesas,fsi2-sh73a0  # SH-Mobile AG5
+              - renesas,fsi2-r8a7740 # R-Mobile A1
+          - enum:
+              - renesas,sh_fsi2
       # for Generic
       - items:
-        - enum:
-          - renesas,sh_fsi
-          - renesas,sh_fsi2
+          - enum:
+              - renesas,sh_fsi
+              - renesas,sh_fsi2
 
   reg:
     maxItems: 1
@@ -34,42 +34,50 @@ properties:
   interrupts:
     maxItems: 1
 
-  fsia,spdif-connection:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description: FSI is connected by S/PDIF
+  clocks:
+    maxItems: 1
 
-  fsia,stream-mode-support:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description: FSI supports 16bit stream mode
+  power-domains:
+    maxItems: 1
 
-  fsia,use-internal-clock:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description: FSI uses internal clock when master mode
+  '#sound-dai-cells':
+    const: 1
 
-  fsib,spdif-connection:
+patternProperties:
+  "^fsi(a|b),spdif-connection$":
     $ref: /schemas/types.yaml#/definitions/flag
-    description: same as fsia
+    description: FSI is connected by S/PDIF
 
-  fsib,stream-mode-support:
+  "^fsi(a|b),stream-mode-support$":
     $ref: /schemas/types.yaml#/definitions/flag
-    description: same as fsia
+    description: FSI supports 16bit stream mode
 
-  fsib,use-internal-clock:
+  "^fsi(a|b),use-internal-clock$":
     $ref: /schemas/types.yaml#/definitions/flag
-    description: same as fsia
+    description: FSI uses internal clock when master mode
 
 required:
   - compatible
   - reg
   - interrupts
+  - clocks
+  - power-domains
+  - '#sound-dai-cells'
+
+additionalProperties: false
 
 examples:
   - |
-    sh_fsi2: sound@ec230000 {
+    #include <dt-bindings/clock/r8a7740-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    sh_fsi2: sound@fe1f0000 {
             compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
-            reg = <0xec230000 0x400>;
-            interrupts = <0 146 0x4>;
+            reg = <0xfe1f0000 0x400>;
+            interrupts = <GIC_SPI 9 0x4>;
+            clocks = <&mstp3_clks R8A7740_CLK_FSI>;
+            power-domains = <&pd_a4mp>;
 
+            #sound-dai-cells = <1>;
             fsia,spdif-connection;
             fsia,stream-mode-support;
             fsia,use-internal-clock;
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index 797fd035434c..b731f16aea84 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -253,521 +253,3 @@ This is example of TDM 6ch.
 Driver can automatically switches TDM <-> stereo mode in this case.
 
 see "Example: simple sound card for TDM"
-
-=============================================
-Required properties:
-=============================================
-
-- compatible			: "renesas,rcar_sound-<soctype>", fallbacks
-				  "renesas,rcar_sound-gen1" if generation1, and
-				  "renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
-				  "renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
-				  Examples with soctypes are:
-				    - "renesas,rcar_sound-r8a7743" (RZ/G1M)
-				    - "renesas,rcar_sound-r8a7744" (RZ/G1N)
-				    - "renesas,rcar_sound-r8a7745" (RZ/G1E)
-				    - "renesas,rcar_sound-r8a77470" (RZ/G1C)
-				    - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
-				    - "renesas,rcar_sound-r8a774b1" (RZ/G2N)
-				    - "renesas,rcar_sound-r8a774c0" (RZ/G2E)
-				    - "renesas,rcar_sound-r8a7778" (R-Car M1A)
-				    - "renesas,rcar_sound-r8a7779" (R-Car H1)
-				    - "renesas,rcar_sound-r8a7790" (R-Car H2)
-				    - "renesas,rcar_sound-r8a7791" (R-Car M2-W)
-				    - "renesas,rcar_sound-r8a7793" (R-Car M2-N)
-				    - "renesas,rcar_sound-r8a7794" (R-Car E2)
-				    - "renesas,rcar_sound-r8a7795" (R-Car H3)
-				    - "renesas,rcar_sound-r8a7796" (R-Car M3-W)
-				    - "renesas,rcar_sound-r8a77965" (R-Car M3-N)
-				    - "renesas,rcar_sound-r8a77990" (R-Car E3)
-				    - "renesas,rcar_sound-r8a77995" (R-Car D3)
-- reg				: Should contain the register physical address.
-				  required register is
-				   SRU/ADG/SSI      if generation1
-				   SRU/ADG/SSIU/SSI/AUDIO-DMAC-periperi if generation2/generation3
-				   Select extended AUDIO-DMAC-periperi address if SoC has it,
-				   otherwise select normal AUDIO-DMAC-periperi address.
-- reg-names			: Should contain the register names.
-				   scu/adg/ssi	if generation1
-				   scu/adg/ssiu/ssi/audmapp if generation2/generation3
-- rcar_sound,ssi		: Should contain SSI feature.
-				  The number of SSI subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,ssiu		: Should contain SSIU feature.
-				  The number of SSIU subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,src		: Should contain SRC feature.
-				  The number of SRC subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,ctu		: Should contain CTU feature.
-				  The number of CTU subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,mix		: Should contain MIX feature.
-				  The number of MIX subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,dvc		: Should contain DVC feature.
-				  The number of DVC subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,dai		: DAI contents.
-				  The number of DAI subnode should be same as HW.
-				  see below for detail.
-- #sound-dai-cells		: it must be 0 if your system is using single DAI
-				  it must be 1 if your system is using multi  DAI
-- clocks			: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
-- clock-names			: List of necessary clock names.
-				  "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X",
-				  "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i"
-
-Optional properties:
-- #clock-cells			: it must be 0 if your system has audio_clkout
-				  it must be 1 if your system has audio_clkout0/1/2/3
-- clock-frequency		: for all audio_clkout0/1/2/3
-- clkout-lr-asynchronous	: boolean property. it indicates that audio_clkoutn
-				  is asynchronizes with lr-clock.
-- resets			: References to SSI resets.
-- reset-names			: List of valid reset names.
-				  "ssi-all", "ssi.X"
-
-SSI subnode properties:
-- interrupts			: Should contain SSI interrupt for PIO transfer
-- shared-pin			: if shared clock pin
-- pio-transfer			: use PIO transfer mode
-- no-busif			: BUSIF is not ussed when [mem -> SSI] via DMA case
-- dma				: Should contain Audio DMAC entry
-- dma-names			: SSI  case "rx"  (=playback), "tx"  (=capture)
-				  Deprecated: see SSIU subnode properties
-				  SSIU case "rxu" (=playback), "txu" (=capture)
-
-SSIU subnode properties:
-- dma				: Should contain Audio DMAC entry
-- dma-names			: "rx" (=playback), "tx" (=capture)
-
-SRC subnode properties:
-- dma				: Should contain Audio DMAC entry
-- dma-names			: "rx" (=playback), "tx" (=capture)
-
-DVC subnode properties:
-- dma				: Should contain Audio DMAC entry
-- dma-names			: "tx" (=playback/capture)
-
-DAI subnode properties:
-- playback			: list of playback modules
-- capture			: list of capture  modules
-
-
-=============================================
-Example:
-=============================================
-
-rcar_sound: sound@ec500000 {
-	#sound-dai-cells = <1>;
-	compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2";
-	reg =	<0 0xec500000 0 0x1000>, /* SCU */
-		<0 0xec5a0000 0 0x100>,  /* ADG */
-		<0 0xec540000 0 0x1000>, /* SSIU */
-		<0 0xec541000 0 0x1280>, /* SSI */
-		<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
-	reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
-	clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
-		<&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
-		<&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
-		<&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
-		<&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
-		<&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
-		<&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
-		<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
-	clock-names = "ssi-all",
-			"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
-			"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
-			"src.9", "src.8", "src.7", "src.6", "src.5",
-			"src.4", "src.3", "src.2", "src.1", "src.0",
-			"dvc.0", "dvc.1",
-			"clk_a", "clk_b", "clk_c", "clk_i";
-
-	rcar_sound,dvc {
-		dvc0: dvc-0 {
-			dmas = <&audma0 0xbc>;
-			dma-names = "tx";
-		};
-		dvc1: dvc-1 {
-			dmas = <&audma0 0xbe>;
-			dma-names = "tx";
-		};
-	};
-
-	rcar_sound,mix {
-		mix0: mix-0 { };
-		mix1: mix-1 { };
-	};
-
-	rcar_sound,ctu {
-		ctu00: ctu-0 { };
-		ctu01: ctu-1 { };
-		ctu02: ctu-2 { };
-		ctu03: ctu-3 { };
-		ctu10: ctu-4 { };
-		ctu11: ctu-5 { };
-		ctu12: ctu-6 { };
-		ctu13: ctu-7 { };
-	};
-
-	rcar_sound,src {
-		src0: src-0 {
-			interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x85>, <&audma1 0x9a>;
-			dma-names = "rx", "tx";
-		};
-		src1: src-1 {
-			interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x87>, <&audma1 0x9c>;
-			dma-names = "rx", "tx";
-		};
-		src2: src-2 {
-			interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x89>, <&audma1 0x9e>;
-			dma-names = "rx", "tx";
-		};
-		src3: src-3 {
-			interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x8b>, <&audma1 0xa0>;
-			dma-names = "rx", "tx";
-		};
-		src4: src-4 {
-			interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x8d>, <&audma1 0xb0>;
-			dma-names = "rx", "tx";
-		};
-		src5: src-5 {
-			interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x8f>, <&audma1 0xb2>;
-			dma-names = "rx", "tx";
-		};
-		src6: src-6 {
-			interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x91>, <&audma1 0xb4>;
-			dma-names = "rx", "tx";
-		};
-		src7: src-7 {
-			interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x93>, <&audma1 0xb6>;
-			dma-names = "rx", "tx";
-		};
-		src8: src-8 {
-			interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x95>, <&audma1 0xb8>;
-			dma-names = "rx", "tx";
-		};
-		src9: src-9 {
-			interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x97>, <&audma1 0xba>;
-			dma-names = "rx", "tx";
-		};
-	};
-
-	rcar_sound,ssiu {
-		ssiu00: ssiu-0 {
-			dmas = <&audma0 0x15>, <&audma1 0x16>;
-			dma-names = "rx", "tx";
-		};
-		ssiu01: ssiu-1 {
-			dmas = <&audma0 0x35>, <&audma1 0x36>;
-			dma-names = "rx", "tx";
-		};
-
-		...
-
-		ssiu95: ssiu-49 {
-			dmas = <&audma0 0xA5>, <&audma1 0xA6>;
-			dma-names = "rx", "tx";
-		};
-		ssiu96: ssiu-50 {
-			dmas = <&audma0 0xA7>, <&audma1 0xA8>;
-			dma-names = "rx", "tx";
-		};
-		ssiu97: ssiu-51 {
-			dmas = <&audma0 0xA9>, <&audma1 0xAA>;
-			dma-names = "rx", "tx";
-		};
-	};
-
-	rcar_sound,ssi {
-		ssi0: ssi-0 {
-			interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x01>, <&audma1 0x02>;
-			dma-names = "rx", "tx";
-		};
-		ssi1: ssi-1 {
-			interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x03>, <&audma1 0x04>;
-			dma-names = "rx", "tx";
-		};
-
-		...
-
-		ssi8: ssi-8 {
-			interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x11>, <&audma1 0x12>;
-			dma-names = "rx", "tx";
-		};
-		ssi9: ssi-9 {
-			interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x13>, <&audma1 0x14>;
-			dma-names = "rx", "tx";
-		};
-	};
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi5 &src5>;
-			capture  = <&ssi6>;
-		};
-		dai1 {
-			playback = <&ssi3>;
-		};
-		dai2 {
-			capture  = <&ssi4>;
-		};
-		dai3 {
-			playback = <&ssi7>;
-		};
-		dai4 {
-			capture  = <&ssi8>;
-		};
-	};
-};
-
-=============================================
-Example: simple sound card
-=============================================
-
-	rsnd_ak4643: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&ak4643>;
-			clocks = <&audio_clock>;
-		};
-	};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins &sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0 &src2 &dvc0>;
-			capture  = <&ssi1 &src3 &dvc1>;
-		};
-	};
-};
-
-&ssi1 {
-	shared-pin;
-};
-
-=============================================
-Example: simple sound card for Asynchronous mode
-=============================================
-
-sound {
-	compatible = "simple-scu-audio-card";
-	...
-	/*
-	 * SRC Asynchronous mode setting
-	 * Playback:
-	 * All input data will be converted to 48kHz
-	 * Capture:
-	 * Inputed 48kHz data will be converted to
-	 * system specified Hz
-	 */
-	simple-audio-card,convert-rate = <48000>;
-	...
-	simple-audio-card,cpu {
-		sound-dai = <&rcar_sound>;
-	};
-	simple-audio-card,codec {
-		...
-	};
-};
-
-=============================================
-Example: simple sound card for channel convert
-=============================================
-
-sound {
-	compatible = "simple-scu-audio-card";
-	...
-	/*
-	 * CTU setting
-	 * All input data will be converted to 2ch
-	 * as output data
-	 */
-	simple-audio-card,convert-channels = <2>;
-	...
-	simple-audio-card,cpu {
-		sound-dai = <&rcar_sound>;
-	};
-	simple-audio-card,codec {
-		...
-	};
-};
-
-=============================================
-Example: simple sound card for MIXer
-=============================================
-
-sound {
-	compatible = "simple-scu-audio-card";
-	...
-	simple-audio-card,cpu@0 {
-		sound-dai = <&rcar_sound 0>;
-	};
-	simple-audio-card,cpu@1 {
-		sound-dai = <&rcar_sound 1>;
-	};
-	simple-audio-card,codec {
-		...
-	};
-};
-
-&rcar_sound {
-	...
-	rcar_sound,dai {
-		dai0 {
-			playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
-		};
-		dai1 {
-			playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
-		};
-	};
-};
-
-=============================================
-Example: simple sound card for TDM
-=============================================
-
-rsnd_tdm: sound {
-	compatible = "simple-audio-card";
-
-	simple-audio-card,format = "left_j";
-	simple-audio-card,bitclock-master = <&sndcodec>;
-	simple-audio-card,frame-master = <&sndcodec>;
-
-	sndcpu: simple-audio-card,cpu {
-		sound-dai = <&rcar_sound>;
-		dai-tdm-slot-num = <6>;
-	};
-
-	sndcodec: simple-audio-card,codec {
-		sound-dai = <&xxx>;
-	};
-};
-
-=============================================
-Example: simple sound card for TDM Split
-=============================================
-
-sound_card: sound {
-	compatible = "audio-graph-scu-card";
-	prefix = "xxxx";
-	routing = "xxxx Playback", "DAI0 Playback",
-		  "xxxx Playback", "DAI1 Playback",
-		  "xxxx Playback", "DAI2 Playback",
-		  "xxxx Playback", "DAI3 Playback";
-	convert-channels = <8>; /* TDM Split */
-
-	dais = <&rsnd_port0     /* playback ch1/ch2 */
-		&rsnd_port1     /* playback ch3/ch4 */
-		&rsnd_port2     /* playback ch5/ch6 */
-		&rsnd_port3     /* playback ch7/ch8 */
-		>;
-};
-
-audio-codec {
-	...
-	port {
-		codec_0: endpoint@1 {
-			remote-endpoint = <&rsnd_ep0>;
-		};
-		codec_1: endpoint@2 {
-			remote-endpoint = <&rsnd_ep1>;
-		};
-		codec_2: endpoint@3 {
-			remote-endpoint = <&rsnd_ep2>;
-		};
-		codec_3: endpoint@4 {
-			remote-endpoint = <&rsnd_ep3>;
-		};
-	};
-};
-
-&rcar_sound {
-	...
-	ports {
-		rsnd_port0: port@0 {
-			rsnd_ep0: endpoint {
-				remote-endpoint = <&codec_0>;
-				...
-				playback = <&ssiu30 &ssi3>;
-			};
-		};
-		rsnd_port1: port@1 {
-			rsnd_ep1: endpoint {
-				remote-endpoint = <&codec_1>;
-				...
-				playback = <&ssiu31 &ssi3>;
-			};
-		};
-		rsnd_port2: port@2 {
-			rsnd_ep2: endpoint {
-				remote-endpoint = <&codec_2>;
-				...
-				playback = <&ssiu32 &ssi3>;
-			};
-		};
-		rsnd_port3: port@3 {
-			rsnd_ep3: endpoint {
-				remote-endpoint = <&codec_3>;
-				...
-				playback = <&ssiu33 &ssi3>;
-			};
-		};
-	};
-};
-
-=============================================
-Example: simple sound card for Multi channel
-=============================================
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins &sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
new file mode 100644
index 000000000000..679a246dd666
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -0,0 +1,463 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Sound Driver
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+
+  compatible:
+    oneOf:
+      # for Gen1 SoC
+      - items:
+          - enum:
+              - renesas,rcar_sound-r8a7778   # R-Car M1A
+              - renesas,rcar_sound-r8a7779   # R-Car H1
+          - enum:
+              - renesas,rcar_sound-gen1
+      # for Gen2 SoC
+      - items:
+          - enum:
+              - renesas,rcar_sound-r8a7742   # RZ/G1H
+              - renesas,rcar_sound-r8a7743   # RZ/G1M
+              - renesas,rcar_sound-r8a7744   # RZ/G1N
+              - renesas,rcar_sound-r8a7745   # RZ/G1E
+              - renesas,rcar_sound-r8a77470  # RZ/G1C
+              - renesas,rcar_sound-r8a7790   # R-Car H2
+              - renesas,rcar_sound-r8a7791   # R-Car M2-W
+              - renesas,rcar_sound-r8a7793   # R-Car M2-N
+              - renesas,rcar_sound-r8a7794   # R-Car E2
+          - enum:
+              - renesas,rcar_sound-gen2
+      # for Gen3 SoC
+      - items:
+          - enum:
+              - renesas,rcar_sound-r8a774a1  # RZ/G2M
+              - renesas,rcar_sound-r8a774b1  # RZ/G2N
+              - renesas,rcar_sound-r8a774c0  # RZ/G2E
+              - renesas,rcar_sound-r8a774e1  # RZ/G2H
+              - renesas,rcar_sound-r8a7795   # R-Car H3
+              - renesas,rcar_sound-r8a7796   # R-Car M3-W
+              - renesas,rcar_sound-r8a77961  # R-Car M3-W+
+              - renesas,rcar_sound-r8a77965  # R-Car M3-N
+              - renesas,rcar_sound-r8a77990  # R-Car E3
+              - renesas,rcar_sound-r8a77995  # R-Car D3
+          - enum:
+              - renesas,rcar_sound-gen3
+      # for Generic
+      - items:
+          - enum:
+              - renesas,rcar_sound-gen1
+              - renesas,rcar_sound-gen2
+              - renesas,rcar_sound-gen3
+
+  reg:
+    minItems: 1
+    maxItems: 5
+
+  reg-names:
+    minItems: 1
+    maxItems: 5
+
+  "#sound-dai-cells":
+    description: |
+      it must be 0 if your system is using single DAI
+      it must be 1 if your system is using multi  DAIs
+    enum: [0, 1]
+
+  "#clock-cells":
+    description: |
+      it must be 0 if your system has audio_clkout
+      it must be 1 if your system has audio_clkout0/1/2/3
+    enum: [0, 1]
+
+  clock-frequency:
+    description: for audio_clkout0/1/2/3
+
+  clkout-lr-asynchronous:
+    description: audio_clkoutn is asynchronizes with lr-clock.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  power-domains: true
+
+  resets:
+    minItems: 1
+    maxItems: 11
+
+  reset-names:
+    minItems: 1
+    maxItems: 11
+
+  clocks:
+    description: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
+    minItems: 1
+    maxItems: 31
+
+  clock-names:
+    description: List of necessary clock names.
+    minItems: 1
+    maxItems: 31
+    items:
+      oneOf:
+        - const: ssi-all
+        - pattern: '^ssi\.[0-9]$'
+        - pattern: '^src\.[0-9]$'
+        - pattern: '^mix\.[0-1]$'
+        - pattern: '^ctu\.[0-1]$'
+        - pattern: '^dvc\.[0-1]$'
+        - pattern: '^clk_(a|b|c|i)$'
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    patternProperties:
+      port(@[0-9a-f]+)?:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+  rcar_sound,dvc:
+    description: DVC subnode.
+    type: object
+    patternProperties:
+      "^dvc-[0-1]$":
+        type: object
+        additionalProperties: false
+
+        properties:
+          dmas:
+            maxItems: 1
+          dma-names:
+            const: "tx"
+        required:
+          - dmas
+          - dma-names
+    additionalProperties: false
+
+  rcar_sound,mix:
+    description: MIX subnode.
+    type: object
+    patternProperties:
+      "^mix-[0-1]$":
+        type: object
+        additionalProperties: false
+    additionalProperties: false
+
+  rcar_sound,ctu:
+    description: CTU subnode.
+    type: object
+    patternProperties:
+      "^ctu-[0-7]$":
+        type: object
+        additionalProperties: false
+    additionalProperties: false
+
+  rcar_sound,src:
+    description: SRC subnode.
+    type: object
+    patternProperties:
+      "^src-[0-9]$":
+        type: object
+        additionalProperties: false
+
+        properties:
+          interrupts:
+            maxItems: 1
+          dmas:
+            maxItems: 2
+          dma-names:
+            allOf:
+              - items:
+                  enum:
+                    - tx
+                    - rx
+        required:
+          - interrupts
+          - dmas
+          - dma-names
+    additionalProperties: false
+
+  rcar_sound,ssiu:
+    description: SSIU subnode.
+    type: object
+    patternProperties:
+      "^ssiu-[0-9]+$":
+        type: object
+        additionalProperties: false
+
+        properties:
+          dmas:
+            maxItems: 2
+          dma-names:
+            allOf:
+              - items:
+                  enum:
+                    - tx
+                    - rx
+        required:
+          - dmas
+          - dma-names
+    additionalProperties: false
+
+  rcar_sound,ssi:
+    description: SSI subnode.
+    type: object
+    patternProperties:
+      "^ssi-[0-9]$":
+        type: object
+        additionalProperties: false
+
+        properties:
+          interrupts:
+            maxItems: 1
+          dmas:
+            minItems: 2
+            maxItems: 4
+          dma-names:
+            allOf:
+              - items:
+                  enum:
+                    - tx
+                    - rx
+                    - txu # if no ssiu node
+                    - rxu # if no ssiu node
+
+          shared-pin:
+            description: shared clock pin
+            $ref: /schemas/types.yaml#/definitions/flag
+          pio-transfer:
+            description: PIO transfer mode
+            $ref: /schemas/types.yaml#/definitions/flag
+          no-busif:
+            description: BUSIF is not used when [mem -> SSI] via DMA case
+            $ref: /schemas/types.yaml#/definitions/flag
+        required:
+          - interrupts
+          - dmas
+          - dma-names
+    additionalProperties: false
+
+  # For DAI base
+  rcar_sound,dai:
+    description: DAI subnode.
+    type: object
+    patternProperties:
+      "^dai([0-9]+)?$":
+        type: object
+        additionalProperties: false
+
+        properties:
+          playback:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+          capture:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+        anyOf:
+          - required:
+              - playback
+          - required:
+              - capture
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - "#sound-dai-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rcar_sound-gen1
+    then:
+      properties:
+        reg:
+          maxItems: 3
+        reg-names:
+          maxItems: 3
+          items:
+            enum:
+              - scu
+              - ssi
+              - adg
+    else:
+      properties:
+        reg:
+          maxItems: 5
+        reg-names:
+          maxItems: 5
+          items:
+            enum:
+              - scu
+              - adg
+              - ssiu
+              - ssi
+              - audmapp
+
+additionalProperties: false
+
+examples:
+  - |
+    rcar_sound: sound@ec500000 {
+        #sound-dai-cells = <1>;
+        compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2";
+        reg = <0xec500000 0x1000>, /* SCU  */
+              <0xec5a0000 0x100>,  /* ADG  */
+              <0xec540000 0x1000>, /* SSIU */
+              <0xec541000 0x1280>, /* SSI  */
+              <0xec740000 0x200>;  /* Audio DMAC peri peri*/
+        reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+        clocks = <&mstp10_clks 1005>,                      /* SSI-ALL    */
+                 <&mstp10_clks 1006>, <&mstp10_clks 1007>, /* SSI9, SSI8 */
+                 <&mstp10_clks 1008>, <&mstp10_clks 1009>, /* SSI7, SSI6 */
+                 <&mstp10_clks 1010>, <&mstp10_clks 1011>, /* SSI5, SSI4 */
+                 <&mstp10_clks 1012>, <&mstp10_clks 1013>, /* SSI3, SSI2 */
+                 <&mstp10_clks 1014>, <&mstp10_clks 1015>, /* SSI1, SSI0 */
+                 <&mstp10_clks 1022>, <&mstp10_clks 1023>, /* SRC9, SRC8 */
+                 <&mstp10_clks 1024>, <&mstp10_clks 1025>, /* SRC7, SRC6 */
+                 <&mstp10_clks 1026>, <&mstp10_clks 1027>, /* SRC5, SRC4 */
+                 <&mstp10_clks 1028>, <&mstp10_clks 1029>, /* SRC3, SRC2 */
+                 <&mstp10_clks 1030>, <&mstp10_clks 1031>, /* SRC1, SRC0 */
+                 <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* MIX1, MIX0 */
+                 <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* CTU1, CTU0 */
+                 <&mstp10_clks 1019>, <&mstp10_clks 1018>, /* DVC0, DVC1 */
+                 <&audio_clk_a>, <&audio_clk_b>,           /* CLKA, CLKB */
+                 <&audio_clk_c>, <&audio_clk_i>;           /* CLKC, CLKI */
+
+        clock-names = "ssi-all",
+                      "ssi.9", "ssi.8",
+                      "ssi.7", "ssi.6",
+                      "ssi.5", "ssi.4",
+                      "ssi.3", "ssi.2",
+                      "ssi.1", "ssi.0",
+                      "src.9", "src.8",
+                      "src.7", "src.6",
+                      "src.5", "src.4",
+                      "src.3", "src.2",
+                      "src.1", "src.0",
+                      "mix.1", "mix.0",
+                      "ctu.1", "ctu.0",
+                      "dvc.0", "dvc.1",
+                      "clk_a", "clk_b",
+                      "clk_c", "clk_i";
+
+        rcar_sound,dvc {
+               dvc0: dvc-0 {
+                    dmas = <&audma0 0xbc>;
+                    dma-names = "tx";
+               };
+               dvc1: dvc-1 {
+                    dmas = <&audma0 0xbe>;
+                    dma-names = "tx";
+               };
+        };
+
+        rcar_sound,mix {
+            mix0: mix-0 { };
+            mix1: mix-1 { };
+        };
+
+        rcar_sound,ctu {
+            ctu00: ctu-0 { };
+            ctu01: ctu-1 { };
+            ctu02: ctu-2 { };
+            ctu03: ctu-3 { };
+            ctu10: ctu-4 { };
+            ctu11: ctu-5 { };
+            ctu12: ctu-6 { };
+            ctu13: ctu-7 { };
+        };
+
+        rcar_sound,src {
+            src0: src-0 {
+                status = "disabled";
+            };
+            src1: src-1 {
+                interrupts = <0 353 0>;
+                dmas = <&audma0 0x87>, <&audma1 0x9c>;
+                dma-names = "rx", "tx";
+            };
+            /* skip after src-2 */
+        };
+
+        rcar_sound,ssiu {
+            ssiu00: ssiu-0 {
+                dmas = <&audma0 0x15>, <&audma1 0x16>;
+                dma-names = "rx", "tx";
+            };
+            ssiu01: ssiu-1 {
+                dmas = <&audma0 0x35>, <&audma1 0x36>;
+                dma-names = "rx", "tx";
+            };
+            /* skip after ssiu-2 */
+        };
+
+        rcar_sound,ssi {
+            ssi0: ssi-0 {
+                interrupts = <0 370 1>;
+                dmas = <&audma0 0x01>, <&audma1 0x02>;
+                dma-names = "rx", "tx";
+            };
+            ssi1: ssi-1 {
+                interrupts = <0 371 1>;
+                dmas = <&audma0 0x03>, <&audma1 0x04>;
+                dma-names = "rx", "tx";
+            };
+            /* skip other ssi-2 */
+        };
+
+        /* DAI base */
+        rcar_sound,dai {
+            dai0 {
+                playback = <&ssi5>, <&src5>;
+                capture  = <&ssi6>;
+            };
+            dai1 {
+                playback = <&ssi3>;
+            };
+            dai2 {
+                capture  = <&ssi4>;
+            };
+            dai3 {
+                playback = <&ssi7>;
+            };
+            dai4 {
+                capture  = <&ssi8>;
+            };
+        };
+
+        /* assume audio-graph */
+        port {
+            rsnd_endpoint: endpoint {
+                remote-endpoint = <&codec_endpoint>;
+
+                dai-format = "left_j";
+                bitclock-master = <&rsnd_endpoint0>;
+                frame-master = <&rsnd_endpoint0>;
+
+                playback = <&ssi0>, <&src0>, <&dvc0>;
+                capture  = <&ssi1>, <&src1>, <&dvc1>;
+            };
+        };
+    };
+
+
+    /* assume audio-graph */
+    codec {
+        port {
+            codec_endpoint: endpoint {
+                remote-endpoint = <&rsnd_endpoint>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
new file mode 100644
index 000000000000..0d9840375132
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,rz-ssi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,V2L} ASoC Sound Serial Interface (SSIF-2)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g043-ssi  # RZ/G2UL
+          - renesas,r9a07g044-ssi  # RZ/G2{L,LC}
+          - renesas,r9a07g054-ssi  # RZ/V2L
+      - const: renesas,rz-ssi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: int_req
+      - const: dma_rx
+      - const: dma_tx
+      - const: dma_rt
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: ssi
+      - const: ssi_sfr
+      - const: audio_clk1
+      - const: audio_clk2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+    description:
+      The first cell represents a phandle to dmac.
+      The second cell specifies the encoded MID/RID values of the SSI port
+      connected to the DMA client and the slave channel configuration
+      parameters.
+      bits[0:9]   - Specifies MID/RID value of a SSI channel as below
+                    MID/RID value of SSI rx0 = 0x256
+                    MID/RID value of SSI tx0 = 0x255
+                    MID/RID value of SSI rx1 = 0x25a
+                    MID/RID value of SSI tx1 = 0x259
+                    MID/RID value of SSI rt2 = 0x25f
+                    MID/RID value of SSI rx3 = 0x262
+                    MID/RID value of SSI tx3 = 0x261
+      bit[10]     - HIEN = 1, Detects a request in response to the rising edge
+                    of the signal
+      bit[11]     - LVL = 0, Detects based on the edge
+      bits[12:14] - AM = 2, Bus cycle mode
+      bit[15]     - TM = 0, Single transfer mode
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+      - items:
+          - const: rt
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    ssi0: ssi@10049c00 {
+        compatible = "renesas,r9a07g044-ssi",
+                     "renesas,rz-ssi";
+            reg = <0x10049c00 0x400>;
+            interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+            clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>,
+                     <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>,
+                     <&audio_clk1>,
+                     <&audio_clk2>;
+            clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_SSI0_RST_M2_REG>;
+            dmas = <&dmac 0x2655>,
+                   <&dmac 0x2656>;
+            dma-names = "tx", "rx";
+            #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml b/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml
new file mode 100644
index 000000000000..5655ca568240
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/richtek,rt9120.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9120 Class-D audio amplifier
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT9120 is a high efficiency, I2S-input, stereo audio power amplifier
+  delivering 2*20W into 8 Ohm BTL speaker loads. It supports the wide input
+  voltage  range from 4.5V to 26.4V to meet the need on most common
+  applications like as TV, monitors. home entertainment, electronic music
+  equipment.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt9120
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  pwdnn-gpios:
+    description: GPIO used for power down, low active
+    maxItems: 1
+
+  dvdd-supply:
+    description: |
+      Supply for the default on DVDD power, voltage domain must be 3P3V or 1P8V
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - dvdd-supply
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      rt9120@1a {
+        compatible = "richtek,rt9120";
+        reg = <0x1a>;
+        pwdnn-gpios = <&gpio26 2 0>;
+        dvdd-supply = <&vdd_io_reg>;
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
new file mode 100644
index 000000000000..6a7c004bef17
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip,i2s-tdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip I2S/TDM Controller
+
+description:
+  The Rockchip I2S/TDM Controller is a Time Division Multiplexed
+  audio interface found in various Rockchip SoCs, allowing up
+  to 8 channels of audio over a serial interface.
+
+maintainers:
+  - Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-i2s-tdm
+      - rockchip,rk1808-i2s-tdm
+      - rockchip,rk3308-i2s-tdm
+      - rockchip,rk3568-i2s-tdm
+      - rockchip,rv1126-i2s-tdm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - rx
+        - tx
+
+  clocks:
+    minItems: 3
+    items:
+      - description: clock for TX
+      - description: clock for RX
+      - description: AHB clock driving the interface
+      - description:
+          Parent clock for mclk_tx (only required when using mclk-calibrate)
+      - description:
+          Parent clock for mclk_rx (only required when using mclk-calibrate)
+      - description:
+          Clock for sample rates that are an integer multiple of 8000
+          (only required when using mclk-calibrate)
+      - description:
+          Clock for sample rates that are an integer multiple of 11025
+          (only required when using mclk-calibrate)
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: mclk_tx
+      - const: mclk_rx
+      - const: hclk
+      - const: mclk_tx_src
+      - const: mclk_rx_src
+      - const: mclk_root0
+      - const: mclk_root1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    description: resets for the tx and rx directions
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - tx-m
+        - rx-m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+
+  rockchip,trcm-sync-tx-only:
+    type: boolean
+    description: Use TX BCLK/LRCK for both TX and RX.
+
+  rockchip,trcm-sync-rx-only:
+    type: boolean
+    description: Use RX BCLK/LRCK for both TX and RX.
+
+  "#sound-dai-cells":
+    const: 0
+
+  rockchip,i2s-rx-route:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Defines the mapping of I2S RX sdis to I2S data bus lines.
+      By default, they are mapped one-to-one.
+      rockchip,i2s-rx-route = <3> would mean sdi3 is receiving from data0.
+    maxItems: 4
+    items:
+      enum: [0, 1, 2, 3]
+
+  rockchip,i2s-tx-route:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Defines the mapping of I2S TX sdos to I2S data bus lines.
+      By default, they are mapped one-to-one.
+      rockchip,i2s-tx-route = <3> would mean sdo3 is sending to data0.
+    maxItems: 4
+    items:
+      enum: [0, 1, 2, 3]
+
+  rockchip,io-multiplex:
+    description:
+      Specify that the GPIO lines on the I2S bus are multiplexed such that
+      the direction (input/output) needs to be dynamically adjusted.
+    type: boolean
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - rockchip,grf
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        i2s@fe410000 {
+            compatible = "rockchip,rk3568-i2s-tdm";
+            reg = <0x0 0xfe410000 0x0 0x1000>;
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>,
+                     <&cru HCLK_I2S1_8CH>;
+            clock-names = "mclk_tx", "mclk_rx", "hclk";
+            dmas = <&dmac1 3>, <&dmac1 2>;
+            dma-names = "rx", "tx";
+            resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
+            reset-names = "tx-m", "rx-m";
+            rockchip,trcm-sync-tx-only;
+            rockchip,grf = <&grf>;
+            #sound-dai-cells = <0>;
+            pinctrl-names = "default";
+            pinctrl-0 =
+                <&i2s1m0_sclktx
+                &i2s1m0_sclkrx
+                &i2s1m0_lrcktx
+                &i2s1m0_lrckrx
+                &i2s1m0_sdi0
+                &i2s1m0_sdi1
+                &i2s1m0_sdi2
+                &i2s1m0_sdi3
+                &i2s1m0_sdo0
+                &i2s1m0_sdo1
+                &i2s1m0_sdo2
+                &i2s1m0_sdo3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt
deleted file mode 100644
index 98572a25122f..000000000000
--- a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Rockchip PDM controller
-
-Required properties:
-
-- compatible: "rockchip,pdm"
-  - "rockchip,px30-pdm"
-  - "rockchip,rk1808-pdm"
-  - "rockchip,rk3308-pdm"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- dmas: DMA specifiers for rx dma. See the DMA client binding,
-	Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: should include "rx".
-- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
-- clock-names: should contain following:
-   - "pdm_hclk": clock for PDM BUS
-   - "pdm_clk" : clock for PDM controller
-- resets: a list of phandle + reset-specifer paris, one for each entry in reset-names.
-- reset-names: reset names, should include "pdm-m".
-- pinctrl-names: Must contain a "default" entry.
-- pinctrl-N: One property must exist for each entry in
-	     pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
-	     for details of the property values.
-
-Example for rk3328 PDM controller:
-
-pdm: pdm@ff040000 {
-	compatible = "rockchip,pdm";
-	reg = <0x0 0xff040000 0x0 0x1000>;
-	clocks = <&clk_pdm>, <&clk_gates28 0>;
-	clock-names = "pdm_clk", "pdm_hclk";
-	dmas = <&pdma 16>;
-	#dma-cells = <1>;
-	dma-names = "rx";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pdmm0_clk
-		     &pdmm0_sdi0
-		     &pdmm0_sdi1
-		     &pdmm0_sdi2
-		     &pdmm0_sdi3>;
-	pinctrl-1 = <&pdmm0_clk_sleep
-		     &pdmm0_sdi0_sleep
-		     &pdmm0_sdi1_sleep
-		     &pdmm0_sdi2_sleep
-		     &pdmm0_sdi3_sleep>;
-};
diff --git a/Documentation/devicetree/bindings/sound/rockchip,pdm.yaml b/Documentation/devicetree/bindings/sound/rockchip,pdm.yaml
new file mode 100644
index 000000000000..22e1cf6c0592
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip,pdm.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip,pdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PDM controller
+
+description:
+  The Pulse Density Modulation Interface Controller (PDMC) is
+  a PDM interface controller and decoder that support PDM format.
+  It integrates a clock generator driving the PDM microphone
+  and embeds filters which decimate the incoming bit stream to
+  obtain most common audio rates.
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,pdm
+      - rockchip,px30-pdm
+      - rockchip,rk1808-pdm
+      - rockchip,rk3308-pdm
+      - rockchip,rk3568-pdm
+      - rockchip,rv1126-pdm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for PDM controller
+      - description: clock for PDM BUS
+
+  clock-names:
+    items:
+      - const: pdm_clk
+      - const: pdm_hclk
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: rx
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: reset for PDM controller
+
+  reset-names:
+    items:
+      - const: pdm-m
+
+  rockchip,path-map:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Defines the mapping of PDM SDIx to PDM PATHx.
+      By default, they are mapped one-to-one.
+    maxItems: 4
+    uniqueItems: true
+    items:
+      enum: [ 0, 1, 2, 3 ]
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3328-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pdm@ff040000 {
+            compatible = "rockchip,pdm";
+            reg = <0x0 0xff040000 0x0 0x1000>;
+            interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru SCLK_PDM>, <&cru HCLK_PDM>;
+            clock-names = "pdm_clk", "pdm_hclk";
+            dmas = <&dmac 16>;
+            dma-names = "rx";
+            #sound-dai-cells = <0>;
+            pinctrl-names = "default", "sleep";
+            pinctrl-0 = <&pdmm0_clk
+                         &pdmm0_sdi0
+                         &pdmm0_sdi1
+                         &pdmm0_sdi2
+                         &pdmm0_sdi3>;
+            pinctrl-1 = <&pdmm0_clk_sleep
+                         &pdmm0_sdi0_sleep
+                         &pdmm0_sdi1_sleep
+                         &pdmm0_sdi2_sleep
+                         &pdmm0_sdi3_sleep>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt
deleted file mode 100644
index 2469588c7ccb..000000000000
--- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Rockchip Rk3328 internal codec
-
-Required properties:
-
-- compatible: "rockchip,rk3328-codec"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- rockchip,grf: the phandle of the syscon node for GRF register.
-- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
-- clock-names: should be "pclk".
-- spk-depop-time-ms: speak depop time msec.
-
-Example for rk3328 internal codec:
-
-codec: codec@ff410000 {
-	compatible = "rockchip,rk3328-codec";
-	reg = <0x0 0xff410000 0x0 0x1000>;
-	rockchip,grf = <&grf>;
-	clocks = <&cru PCLK_ACODEC>;
-	clock-names = "pclk";
-	spk-depop-time-ms = 100;
-	status = "disabled";
-};
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml
new file mode 100644
index 000000000000..75b3b33b5f1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip,rk3328-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3328 internal codec
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3328-codec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for audio codec
+      - description: clock for I2S master clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: mclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+
+  spk-depop-time-ms:
+    default: 200
+    description:
+      Speaker depop time in msec.
+
+  mute-gpios:
+    maxItems: 1
+    description:
+      GPIO specifier for external line driver control (typically the
+      dedicated GPIO_MUTE pin)
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - rockchip,grf
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/rk3328-cru.h>
+    codec: codec@ff410000 {
+      compatible = "rockchip,rk3328-codec";
+      reg = <0xff410000 0x1000>;
+      clocks = <&cru PCLK_ACODECPHY>, <&cru SCLK_I2S1>;
+      clock-names = "pclk", "mclk";
+      rockchip,grf = <&grf>;
+      mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
+      spk-depop-time-ms = <100>;
+      #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
deleted file mode 100644
index 54aefab71f2c..000000000000
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Rockchip I2S controller
-
-The I2S bus (Inter-IC sound bus) is a serial link for digital
-audio data transfer between devices in the system.
-
-Required properties:
-
-- compatible: should be one of the following:
-   - "rockchip,rk3066-i2s": for rk3066
-   - "rockchip,px30-i2s", "rockchip,rk3066-i2s": for px30
-   - "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036
-   - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
-   - "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228
-   - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
-   - "rockchip,rk3328-i2s", "rockchip,rk3066-i2s": for rk3328
-   - "rockchip,rk3366-i2s", "rockchip,rk3066-i2s": for rk3366
-   - "rockchip,rk3368-i2s", "rockchip,rk3066-i2s": for rk3368
-   - "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: should contain the I2S interrupt.
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-	Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: should include "tx" and "rx".
-- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
-- clock-names: should contain the following:
-   - "i2s_hclk": clock for I2S BUS
-   - "i2s_clk" : clock for I2S controller
-- rockchip,playback-channels: max playback channels, if not set, 8 channels default.
-- rockchip,capture-channels: max capture channels, if not set, 2 channels default.
-
-Required properties for controller which support multi channels
-playback/capture:
-
-- rockchip,grf: the phandle of the syscon node for GRF register.
-
-Example for rk3288 I2S controller:
-
-i2s@ff890000 {
-	compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
-	reg = <0xff890000 0x10000>;
-	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-	dmas = <&pdma1 0>, <&pdma1 1>;
-	dma-names = "tx", "rx";
-	clock-names = "i2s_hclk", "i2s_clk";
-	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <2>;
-};
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
new file mode 100644
index 000000000000..7e36e389e976
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip I2S controller
+
+description:
+  The I2S bus (Inter-IC sound bus) is a serial link for digital
+  audio data transfer between devices in the system.
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3066-i2s
+      - items:
+          - enum:
+              - rockchip,px30-i2s
+              - rockchip,rk1808-i2s
+              - rockchip,rk3036-i2s
+              - rockchip,rk3128-i2s
+              - rockchip,rk3188-i2s
+              - rockchip,rk3228-i2s
+              - rockchip,rk3288-i2s
+              - rockchip,rk3308-i2s
+              - rockchip,rk3328-i2s
+              - rockchip,rk3366-i2s
+              - rockchip,rk3368-i2s
+              - rockchip,rk3399-i2s
+              - rockchip,rv1126-i2s
+          - const: rockchip,rk3066-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for I2S controller
+      - description: clock for I2S BUS
+
+  clock-names:
+    items:
+      - const: i2s_clk
+      - const: i2s_hclk
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    oneOf:
+      - const: rx
+      - items:
+          - const: tx
+          - const: rx
+
+  pinctrl-names:
+    oneOf:
+      - const: default
+      - items:
+          - const: bclk_on
+          - const: bclk_off
+
+  power-domains:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: reset-m
+      - const: reset-h
+
+  resets:
+    maxItems: 2
+
+  rockchip,capture-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2
+    description:
+      Max capture channels, if not set, 2 channels default.
+
+  rockchip,playback-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+    description:
+      Max playback channels, if not set, 8 channels default.
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+      Required property for controllers which support multi channel
+      playback/capture.
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2s@ff890000 {
+      compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+      reg = <0xff890000 0x10000>;
+      interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+      clock-names = "i2s_clk", "i2s_hclk";
+      dmas = <&pdma1 0>, <&pdma1 1>;
+      dma-names = "tx", "rx";
+      rockchip,capture-channels = <2>;
+      rockchip,playback-channels = <8>;
+      #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt
deleted file mode 100644
index ec20c1271e92..000000000000
--- a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Rockchip SPDIF transceiver
-
-The S/PDIF audio block is a stereo transceiver that allows the
-processor to receive and transmit digital audio via an coaxial cable or
-a fibre cable.
-
-Required properties:
-
-- compatible: should be one of the following:
-   - "rockchip,rk3066-spdif"
-   - "rockchip,rk3188-spdif"
-   - "rockchip,rk3228-spdif"
-   - "rockchip,rk3288-spdif"
-   - "rockchip,rk3328-spdif"
-   - "rockchip,rk3366-spdif"
-   - "rockchip,rk3368-spdif"
-   - "rockchip,rk3399-spdif"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: should contain the SPDIF interrupt.
-- dmas: DMA specifiers for tx dma. See the DMA client binding,
-  Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: should be "tx"
-- clocks: a list of phandle + clock-specifier pairs, one for each entry
-  in clock-names.
-- clock-names: should contain following:
-   - "hclk": clock for SPDIF controller
-   - "mclk" : clock for SPDIF bus
-
-Required properties on RK3288:
-  - rockchip,grf: the phandle of the syscon node for the general register
-                   file (GRF)
-
-Example for the rk3188 SPDIF controller:
-
-spdif: spdif@1011e000 {
-	compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
-	reg = <0x1011e000 0x2000>;
-	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-	dmas = <&dmac1_s 8>;
-	dma-names = "tx";
-	clock-names = "hclk", "mclk";
-	clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
-	#sound-dai-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
new file mode 100644
index 000000000000..d0a24bf928d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SPDIF transceiver
+
+description:
+  The S/PDIF audio block is a stereo transceiver that allows the
+  processor to receive and transmit digital audio via a coaxial or
+  fibre cable.
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3066-spdif
+      - const: rockchip,rk3228-spdif
+      - const: rockchip,rk3328-spdif
+      - const: rockchip,rk3366-spdif
+      - const: rockchip,rk3368-spdif
+      - const: rockchip,rk3399-spdif
+      - const: rockchip,rk3568-spdif
+      - items:
+          - enum:
+              - rockchip,rk3188-spdif
+              - rockchip,rk3288-spdif
+              - rockchip,rk3308-spdif
+          - const: rockchip,rk3066-spdif
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for SPDIF bus
+      - description: clock for SPDIF controller
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: hclk
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: tx
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+      Required property on RK3288.
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: rockchip,rk3288-spdif
+
+then:
+  required:
+    - rockchip,grf
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    spdif: spdif@1011e000 {
+      compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
+      reg = <0x1011e000 0x2000>;
+      interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>;
+      clock-names = "mclk", "hclk";
+      dmas = <&dmac1_s 8>;
+      dma-names = "tx";
+      #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/rohm,bd28623.txt b/Documentation/devicetree/bindings/sound/rohm,bd28623.txt
deleted file mode 100644
index d84557c2686e..000000000000
--- a/Documentation/devicetree/bindings/sound/rohm,bd28623.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-ROHM BD28623MUV Class D speaker amplifier for digital input
-
-This codec does not have any control buses such as I2C, it detect format and
-rate of I2S signal automatically. It has two signals that can be connected
-to GPIOs: reset and mute.
-
-Required properties:
-- compatible      : should be "rohm,bd28623"
-- #sound-dai-cells: should be 0.
-- VCCA-supply     : regulator phandle for the VCCA supply
-- VCCP1-supply    : regulator phandle for the VCCP1 supply
-- VCCP2-supply    : regulator phandle for the VCCP2 supply
-
-Optional properties:
-- reset-gpios     : GPIO specifier for the active low reset line
-- mute-gpios      : GPIO specifier for the active low mute line
-
-Example:
-
-	codec {
-		compatible = "rohm,bd28623";
-		#sound-dai-cells = <0>;
-
-		VCCA-supply = <&vcc_reg>;
-		VCCP1-supply = <&vcc_reg>;
-		VCCP2-supply = <&vcc_reg>;
-		reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-		mute-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml b/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml
new file mode 100644
index 000000000000..859ce64da152
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rohm,bd28623.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD28623MUV Class D speaker amplifier for digital input
+
+description:
+  This codec does not have any control buses such as I2C, it detect
+  format and rate of I2S signal automatically. It has two signals
+  that can be connected to GPIOs reset and mute.
+
+maintainers:
+  - Katsuhiro Suzuki <katsuhiro@katsuster.net>
+
+properties:
+  compatible:
+    const: rohm,bd28623
+
+  "#sound-dai-cells":
+    const: 0
+
+  VCCA-supply:
+    description:
+      regulator phandle for the VCCA (for analog) power supply
+
+  VCCP1-supply:
+    description:
+      regulator phandle for the VCCP1 (for ch1) power supply
+
+  VCCP2-supply:
+    description:
+      regulator phandle for the VCCP2 (for ch2) power supply
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO specifier for the active low reset line
+
+  mute-gpios:
+    maxItems: 1
+    description:
+      GPIO specifier for the active low mute line
+
+required:
+  - compatible
+  - VCCA-supply
+  - VCCP1-supply
+  - VCCP2-supply
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    codec {
+      compatible = "rohm,bd28623";
+      #sound-dai-cells = <0>;
+
+      VCCA-supply = <&vcc_reg>;
+      VCCP1-supply = <&vcc_reg>;
+      VCCP2-supply = <&vcc_reg>;
+      reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+      mute-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/rt1015.txt b/Documentation/devicetree/bindings/sound/rt1015.txt
index fcfd02d8d32f..e498966d436f 100644
--- a/Documentation/devicetree/bindings/sound/rt1015.txt
+++ b/Documentation/devicetree/bindings/sound/rt1015.txt
@@ -8,10 +8,16 @@ Required properties:
 
 - reg : The I2C address of the device.
 
+Optional properties:
+
+- realtek,power-up-delay-ms
+  Set a delay time for flush work to be completed,
+  this value is adjustable depending on platform.
 
 Example:
 
 rt1015: codec@28 {
 	compatible = "realtek,rt1015";
 	reg = <0x28>;
+	realtek,power-up-delay-ms = <50>;
 };
diff --git a/Documentation/devicetree/bindings/sound/rt1016.txt b/Documentation/devicetree/bindings/sound/rt1016.txt
new file mode 100644
index 000000000000..2310f8ff259b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt1016.txt
@@ -0,0 +1,17 @@
+RT1016 Stereo Class D Audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1016".
+
+- reg : The I2C address of the device.
+
+
+Example:
+
+rt1016: codec@1a {
+	compatible = "realtek,rt1016";
+	reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt1019.yaml b/Documentation/devicetree/bindings/sound/rt1019.yaml
new file mode 100644
index 000000000000..3d5a91a942f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt1019.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rt1019.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RT1019 Mono Class-D Audio Amplifier
+
+maintainers:
+  - jack.yu@realtek.com
+
+properties:
+  compatible:
+    const: realtek,rt1019
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        rt1019: codec@28 {
+            compatible = "realtek,rt1019";
+            reg = <0x28>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/rt1308.txt b/Documentation/devicetree/bindings/sound/rt1308.txt
index 2d46084afce4..2d46084afce4 100755..100644
--- a/Documentation/devicetree/bindings/sound/rt1308.txt
+++ b/Documentation/devicetree/bindings/sound/rt1308.txt
diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt
index e40e4893eed8..ff1228713f7e 100644
--- a/Documentation/devicetree/bindings/sound/rt5640.txt
+++ b/Documentation/devicetree/bindings/sound/rt5640.txt
@@ -88,7 +88,7 @@ rt5640 {
 	compatible = "realtek,rt5640";
 	reg = <0x1c>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt
index 1766e0543fc5..013f534fa059 100644
--- a/Documentation/devicetree/bindings/sound/rt5659.txt
+++ b/Documentation/devicetree/bindings/sound/rt5659.txt
@@ -37,10 +37,21 @@ Optional properties:
 - realtek,jd-src
   0: No JD is used
   1: using JD3 as JD source
+  2: JD source for Intel HDA header
 
 - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
 - realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
 
+- sound-name-prefix: Please refer to name-prefix.yaml
+
+- ports: A Codec may have a single or multiple I2S interfaces. These
+  interfaces on Codec side can be described under 'ports' or 'port'.
+  When the SoC or host device is connected to multiple interfaces of
+  the Codec, the connectivity can be described using 'ports' property.
+  If a single interface is used, then 'port' can be used. The usage
+  depends on the platform or board design.
+  Please refer to Documentation/devicetree/bindings/graph.txt
+
 Pins on the device (for linking into audio routes) for RT5659/RT5658:
 
   * DMIC L1
@@ -72,7 +83,7 @@ rt5659 {
 	compatible = "realtek,rt5659";
 	reg = <0x1b>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/sound/rt5665.txt b/Documentation/devicetree/bindings/sound/rt5665.txt
index 8df170506986..f6ca96b4ce98 100644
--- a/Documentation/devicetree/bindings/sound/rt5665.txt
+++ b/Documentation/devicetree/bindings/sound/rt5665.txt
@@ -62,7 +62,7 @@ rt5659 {
 	compatible = "realtek,rt5665";
 	reg = <0x1b>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/sound/rt5668.txt b/Documentation/devicetree/bindings/sound/rt5668.txt
index c88b96e7764b..a2b7e9a2f2f3 100644
--- a/Documentation/devicetree/bindings/sound/rt5668.txt
+++ b/Documentation/devicetree/bindings/sound/rt5668.txt
@@ -41,7 +41,7 @@ rt5668 {
 	compatible = "realtek,rt5668b";
 	reg = <0x1a>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
 	realtek,dmic1-data-pin = <1>;
diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt
index 1b3c13d206ff..da2430099181 100644
--- a/Documentation/devicetree/bindings/sound/rt5677.txt
+++ b/Documentation/devicetree/bindings/sound/rt5677.txt
@@ -64,7 +64,7 @@ rt5677 {
 	compatible = "realtek,rt5677";
 	reg = <0x2c>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 
 	gpio-controller;
 	#gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
index 30e927a28369..c5f2b8febcee 100644
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -32,6 +32,22 @@ Optional properties:
   The delay time is realtek,btndet-delay value multiple of 8.192 ms.
   If absent, the default is 16.
 
+- #clock-cells : Should be set to '<1>',  wclk and bclk sources provided.
+- clock-output-names : Name given for DAI clocks output.
+
+- clocks : phandle and clock specifier for codec MCLK.
+- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
+
+- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of
+  the particular DMIC.
+
+- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
+  the particular DMIC.
+
+- realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
+
+- #sound-dai-cells: Should be set to '<0>'.
+
 Pins on the device (for linking into audio routes) for RT5682:
 
   * DMIC L1
@@ -46,11 +62,17 @@ rt5682 {
 	compatible = "realtek,rt5682i";
 	reg = <0x1a>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
 	realtek,dmic1-data-pin = <1>;
 	realtek,dmic1-clk-pin = <1>;
 	realtek,jd-src = <1>;
 	realtek,btndet-delay = <16>;
+
+	#clock-cells = <1>;
+	clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
+
+	clocks = <&osc>;
+	clock-names = "mclk";
 };
diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
new file mode 100644
index 000000000000..447e013f6e17
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,aries-wm8994.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Aries audio complex with WM8994 codec
+
+maintainers:
+  - Jonathan Bakker <xc-racer2@live.ca>
+
+properties:
+  compatible:
+    enum:
+      # With FM radio and modem master
+      - samsung,aries-wm8994
+      # Without FM radio and modem slave
+      - samsung,fascinate4g-wm8994
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  cpu:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        minItems: 2
+        maxItems: 2
+        description: |
+          phandles to the I2S controller and bluetooth codec,
+          in that order
+    required:
+      - sound-dai
+
+  codec:
+    additionalProperties: false
+    type: object
+    properties:
+      sound-dai:
+        maxItems: 1
+        description: phandle to the WM8994 CODEC
+    required:
+      - sound-dai
+
+  samsung,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      List of the connections between audio
+      components;  each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source;
+      valid names for sources and sinks are the WM8994's pins (as
+      documented in its binding), and the jacks on the board -
+      For samsung,aries-wm8994: HP, SPK, RCV, LINE, Main Mic, Headset Mic,
+      or FM In
+      For samsung,fascinate4g-wm8994: HP, SPK, RCV, LINE, Main Mic,
+      or HeadsetMic
+
+  extcon:
+    description: Extcon phandle for dock detection
+
+  main-micbias-supply:
+    description: Supply for the micbias on the main mic
+
+  headset-micbias-supply:
+    description: Supply for the micbias on the headset mic
+
+  earpath-sel-gpios:
+    maxItems: 1
+    description: GPIO for switching between tv-out and mic paths
+
+  headset-detect-gpios:
+    maxItems: 1
+    description: GPIO for detection of headset insertion
+
+  headset-key-gpios:
+    maxItems: 1
+    description: GPIO for detection of headset key press
+
+  io-channels:
+    maxItems: 1
+    description: IO channel to read micbias voltage for headset detection
+
+  io-channel-names:
+    const: headset-detect
+
+required:
+  - compatible
+  - model
+  - cpu
+  - codec
+  - samsung,audio-routing
+  - extcon
+  - main-micbias-supply
+  - headset-micbias-supply
+  - earpath-sel-gpios
+  - headset-detect-gpios
+  - headset-key-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    sound {
+        compatible = "samsung,fascinate4g-wm8994";
+
+        model = "Fascinate4G";
+
+        extcon = <&fsa9480>;
+
+        main-micbias-supply = <&main_micbias_reg>;
+        headset-micbias-supply = <&headset_micbias_reg>;
+
+        earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>;
+
+        io-channels = <&adc 3>;
+        io-channel-names = "headset-detect";
+        headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_HIGH>;
+        headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>;
+
+        samsung,audio-routing =
+            "HP", "HPOUT1L",
+            "HP", "HPOUT1R",
+
+            "SPK", "SPKOUTLN",
+            "SPK", "SPKOUTLP",
+
+            "RCV", "HPOUT2N",
+            "RCV", "HPOUT2P",
+
+            "LINE", "LINEOUT2N",
+            "LINE", "LINEOUT2P",
+
+            "IN1LP", "Main Mic",
+            "IN1LN", "Main Mic",
+
+            "IN1RP", "Headset Mic",
+            "IN1RN", "Headset Mic";
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&headset_det &earpath_sel>;
+
+        cpu {
+            sound-dai = <&i2s0>, <&bt_codec>;
+        };
+
+        codec {
+            sound-dai = <&wm8994>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,arndale.yaml b/Documentation/devicetree/bindings/sound/samsung,arndale.yaml
new file mode 100644
index 000000000000..9bc4585bb6e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,arndale.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,arndale.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Insignal Arndale boards audio complex
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,arndale-alc5631
+      - samsung,arndale-rt5631
+      - samsung,arndale-wm1811
+
+  samsung,audio-codec:
+    description: Phandle to the audio codec.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  samsung,audio-cpu:
+    description: Phandle to the Samsung I2S controller.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  samsung,model:
+    description: The user-visible name of this sound complex.
+    $ref: /schemas/types.yaml#/definitions/string
+
+required:
+  - compatible
+  - samsung,audio-codec
+  - samsung,audio-cpu
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "samsung,arndale-rt5631";
+        samsung,audio-cpu = <&i2s0>;
+        samsung,audio-codec = <&rt5631>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
new file mode 100644
index 000000000000..31095913e330
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,midas-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Midas audio complex with WM1811 codec
+
+maintainers:
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,midas-audio
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  cpu:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+        description: phandle to the I2S controller
+    required:
+      - sound-dai
+
+  codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+        description: phandle to the WM1811 CODEC
+    required:
+      - sound-dai
+
+  samsung,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      List of the connections between audio components; each entry is
+      a pair of strings, the first being the connection's sink, the second
+      being the connection's source; valid names for sources and sinks are
+      the WM1811's pins (as documented in its binding), and the jacks
+      on the board: HP, SPK, Main Mic, Sub Mic, Headset Mic.
+
+  mic-bias-supply:
+    description: Supply for the micbias on the Main microphone
+
+  submic-bias-supply:
+    description: Supply for the micbias on the Sub microphone
+
+  fm-sel-gpios:
+    maxItems: 1
+    description: GPIO pin for FM selection
+
+  lineout-sel-gpios:
+    maxItems: 1
+    description: GPIO pin for line out selection
+
+required:
+  - compatible
+  - model
+  - cpu
+  - codec
+  - samsung,audio-routing
+  - mic-bias-supply
+  - submic-bias-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    sound {
+        compatible = "samsung,midas-audio";
+        model = "Midas";
+
+        fm-sel-gpios = <&gpaa0 3 GPIO_ACTIVE_HIGH>;
+
+        mic-bias-supply = <&mic_bias_reg>;
+        submic-bias-supply = <&submic_bias_reg>;
+
+        samsung,audio-routing =
+                "HP", "HPOUT1L",
+                "HP", "HPOUT1R",
+
+                "SPK", "SPKOUTLN",
+                "SPK", "SPKOUTLP",
+                "SPK", "SPKOUTRN",
+                "SPK", "SPKOUTRP",
+
+                "RCV", "HPOUT2N",
+                "RCV", "HPOUT2P",
+
+                "IN1LP", "Main Mic",
+                "IN1LN", "Main Mic",
+                "IN1RP", "Sub Mic",
+                "IN1LP", "Sub Mic";
+
+        cpu {
+            sound-dai = <&i2s0>;
+        };
+
+        codec {
+            sound-dai = <&wm1811>;
+        };
+
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
index c6b244352d05..7b4e08ddef6a 100644
--- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
@@ -28,22 +28,24 @@ properties:
     $ref: /schemas/types.yaml#/definitions/string
     description: The user-visible name of this sound complex.
 
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+  clocks: true
+
   cpu:
     type: object
     properties:
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle-array
         description: phandles to the I2S controllers
 
   codec:
     type: object
     properties:
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle-array
-        description: |
-          List of phandles to the CODEC nodes,
-          first entry must be corresponding to the MAX98090 CODEC and
-          the second entry must be the phandle of the HDMI IP block node.
+        items:
+          - description: phandle of the MAX98090 CODEC
+          - description: phandle of the HDMI IP block node
 
   samsung,audio-routing:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
@@ -69,6 +71,8 @@ required:
   - cpu
   - codec
 
+additionalProperties: false
+
 examples:
   - |
     sound {
@@ -88,4 +92,3 @@ examples:
             sound-dai = <&hdmi>, <&max98090>;
         };
     };
-
diff --git a/Documentation/devicetree/bindings/sound/samsung,smdk-wm8994.txt b/Documentation/devicetree/bindings/sound/samsung,smdk-wm8994.txt
deleted file mode 100644
index 4686646fb122..000000000000
--- a/Documentation/devicetree/bindings/sound/samsung,smdk-wm8994.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Samsung SMDK audio complex
-
-Required properties:
-- compatible : "samsung,smdk-wm8994"
-- samsung,i2s-controller: The phandle of the Samsung I2S0 controller
-- samsung,audio-codec: The phandle of the WM8994 audio codec
-Example:
-
-sound {
-		compatible = "samsung,smdk-wm8994";
-
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&wm8994>;
-};
diff --git a/Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml b/Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml
new file mode 100644
index 000000000000..ac151d3c1d77
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,smdk5250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SMDK5250 audio complex with WM8994 codec
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,smdk-wm8994
+
+  samsung,audio-codec:
+    description: Phandle to the audio codec.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  samsung,i2s-controller:
+    description: Phandle to the Samsung I2S controller.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - samsung,audio-codec
+  - samsung,i2s-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "samsung,smdk-wm8994";
+        samsung,i2s-controller = <&i2s0>;
+        samsung,audio-codec = <&wm8994>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,snow.yaml b/Documentation/devicetree/bindings/sound/samsung,snow.yaml
new file mode 100644
index 000000000000..3d49aa4c9be2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,snow.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,snow.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Snow audio complex with MAX9809x codec
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - google,snow-audio-max98090
+      - google,snow-audio-max98091
+      - google,snow-audio-max98095
+
+  codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        description: List of phandles to the CODEC and HDMI IP nodes.
+        items:
+          - description: Phandle to the MAX98090, MAX98091 or MAX98095 CODEC.
+          - description: Phandle to the HDMI IP block node.
+    required:
+      - sound-dai
+
+  cpu:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        description: Phandle to the Samsung I2S controller.
+        maxItems: 1
+    required:
+      - sound-dai
+
+  samsung,audio-codec:
+    description: Phandle to the audio codec.
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  samsung,i2s-controller:
+    description: Phandle to the Samsung I2S controller.
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  samsung,model:
+    description: The user-visible name of this sound complex.
+    $ref: /schemas/types.yaml#/definitions/string
+
+required:
+  - compatible
+  - codec
+  - cpu
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "google,snow-audio-max98095";
+        samsung,model = "Snow-I2S-MAX98095";
+
+        cpu {
+            sound-dai = <&i2s0 0>;
+        };
+
+        codec {
+            sound-dai = <&max98095 0>, <&hdmi>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt
deleted file mode 100644
index f5ccc12ddc00..000000000000
--- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Samsung Exynos5433 TM2(E) audio complex with WM5110 codec
-
-Required properties:
-
- - compatible		 : "samsung,tm2-audio"
- - model		 : the user-visible name of this sound complex
- - audio-codec		 : the first entry should be phandle of the wm5110 audio
-			   codec node, as described in ../mfd/arizona.txt;
-			   the second entry should be phandle of the HDMI
-			   transmitter node
- - i2s-controller	 : the list of phandle and argument tuples pointing to
-			   I2S controllers, the first entry should be I2S0 and
-			   the second one I2S1
- - audio-amplifier	 : the phandle of the MAX98504 amplifier
- - samsung,audio-routing : a list of the connections between audio components;
-			   each entry is a pair of strings, the first being the
-			   connection's sink, the second being the connection's
-			   source; valid names for sources and sinks are the
-			   WM5110's and MAX98504's pins and the jacks on the
-			   board: HP, SPK, Main Mic, Sub Mic, Third Mic,
-			   Headset Mic
- - mic-bias-gpios	 : GPIO pin that enables the Main Mic bias regulator
-
-
-Example:
-
-sound {
-	compatible = "samsung,tm2-audio";
-	audio-codec = <&wm5110>, <&hdmi>;
-	i2s-controller = <&i2s0 0>, <&i2s1 0>;
-	audio-amplifier = <&max98504>;
-	mic-bias-gpios = <&gpr3 2 0>;
-	model = "wm5110";
-	samsung,audio-routing =
-		"HP", "HPOUT1L",
-		"HP", "HPOUT1R",
-		"SPK", "SPKOUT",
-		"SPKOUT", "HPOUT2L",
-		"SPKOUT", "HPOUT2R",
-		"Main Mic", "MICBIAS2",
-		"IN1R", "Main Mic";
-};
diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
new file mode 100644
index 000000000000..491e08019c04
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,tm2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 TM2(E) audio complex with WM5110 codec
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,tm2-audio
+
+  audio-amplifier:
+    description: Phandle to the MAX98504 amplifier.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  audio-codec:
+    description: Phandles to the codecs.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - description: Phandle to the WM5110 audio codec.
+      - description: Phandle to the HDMI transmitter node.
+
+  samsung,audio-routing:
+    description: |
+      List of the connections between audio components; each entry is
+      a pair of strings, the first being the connection's sink, the second
+      being the connection's source; valid names for sources and sinks are the
+      WM5110's and MAX98504's pins and the jacks on the board: HP, SPK, Main
+      Mic, Sub Mic, Third Mic, Headset Mic.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  i2s-controller:
+    description: Phandles to the I2S controllers.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - description: Phandle to I2S0.
+      - description: Phandle to I2S1.
+
+  mic-bias-gpios:
+    description: GPIO pin that enables the Main Mic bias regulator.
+
+  model:
+    description: The user-visible name of this sound complex.
+    $ref: /schemas/types.yaml#/definitions/string
+
+required:
+  - compatible
+  - audio-amplifier
+  - audio-codec
+  - samsung,audio-routing
+  - i2s-controller
+  - mic-bias-gpios
+  - model
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    sound {
+        compatible = "samsung,tm2-audio";
+        audio-codec = <&wm5110>, <&hdmi>;
+        i2s-controller = <&i2s0 0>, <&i2s1 0>;
+        audio-amplifier = <&max98504>;
+        mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+        model = "wm5110";
+        samsung,audio-routing = "HP", "HPOUT1L",
+                                "HP", "HPOUT1R",
+                                "SPK", "SPKOUT",
+                                "SPKOUT", "HPOUT2L",
+                                "SPKOUT", "HPOUT2R",
+                                "RCV", "HPOUT3L",
+                                "RCV", "HPOUT3R";
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
index 53e3bad4178c..84c4d6cba521 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
@@ -41,6 +41,12 @@ properties:
       - samsung,exynos7-i2s
       - samsung,exynos7-i2s1
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
   reg:
     maxItems: 1
 
@@ -58,6 +64,9 @@ properties:
           - const: rx
           - const: tx-sec
 
+  assigned-clock-parents: true
+  assigned-clocks: true
+
   clocks:
     minItems: 1
     maxItems: 3
@@ -92,17 +101,17 @@ properties:
           - const: i2s_cdclk2
     description: Names of the CDCLK I2S output clocks.
 
+  interrupts:
+    maxItems: 1
+
   samsung,idma-addr:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Internal DMA register base address of the audio
       subsystem (used in secondary sound source).
 
-  pinctrl-0:
-    description: Should specify pin control groups used for this controller.
-
-  pinctrl-names:
-    const: default
+  power-domains:
+    maxItems: 1
 
   "#sound-dai-cells":
     const: 1
@@ -115,6 +124,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/exynos-audss-clk.h>
diff --git a/Documentation/devicetree/bindings/sound/serial-midi.yaml b/Documentation/devicetree/bindings/sound/serial-midi.yaml
new file mode 100644
index 000000000000..4afc29376efc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/serial-midi.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/serial-midi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Serial MIDI Interface
+
+maintainers:
+  - Daniel Kaehn <kaehndan@gmail.com>
+
+description:
+  Generic MIDI interface using a serial device. This denotes that a serial device is
+  dedicated to MIDI communication, either to an external MIDI device through a DIN5
+  or other connector, or to a known hardwired MIDI controller. This device must be a
+  child node of a serial node.
+
+  Can only be set to use standard baud rates corresponding to supported rates of the
+  parent serial device. If the standard MIDI baud of 31.25 kBaud is needed
+  (as would be the case if interfacing with arbitrary external MIDI devices),
+  configure the clocks of the parent serial device so that a requested baud of 38.4 kBaud
+  resuts in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default)
+
+properties:
+  compatible:
+    const: serial-midi
+
+  current-speed:
+    description: Baudrate to set the serial port to when this MIDI device is opened.
+    default: 38400
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+        midi {
+            compatible = "serial-midi";
+        };
+    };
+  - |
+    serial {
+        midi {
+            compatible = "serial-midi";
+            current-speed = <115200>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt
deleted file mode 100644
index 9d9ff5184939..000000000000
--- a/Documentation/devicetree/bindings/sound/sgtl5000.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Freescale SGTL5000 Stereo Codec
-
-Required properties:
-- compatible : "fsl,sgtl5000".
-
-- reg : the I2C address of the device
-
-- #sound-dai-cells: must be equal to 0
-
-- clocks : the clock provider of SYS_MCLK
-
-- VDDA-supply : the regulator provider of VDDA
-
-- VDDIO-supply: the regulator provider of VDDIO
-
-Optional properties:
-
-- VDDD-supply : the regulator provider of VDDD
-
-- micbias-resistor-k-ohms : the bias resistor to be used in kOhms
-	The resistor can take values of 2k, 4k or 8k.
-	If set to 0 it will be off.
-	If this node is not mentioned or if the value is unknown, then
-	micbias	resistor is set to 4K.
-
-- micbias-voltage-m-volts : the bias voltage to be used in mVolts
-	The voltage can take values from 1.25V to 3V by 250mV steps
-	If this node is not mentioned or the value is unknown, then
-	the value is set to 1.25V.
-
-- lrclk-strength: the LRCLK pad strength. Possible values are:
-0, 1, 2 and 3 as per the table below:
-
-VDDIO		1.8V		2.5V		3.3V
-0 = 		Disable
-1 =		1.66 mA		2.87 mA		4.02  mA
-2 =		3.33 mA		5.74 mA		8.03  mA
-3 =		4.99 mA		8.61 mA		12.05 mA
-
-- sclk-strength: the SCLK pad strength. Possible values are:
-0, 1, 2 and 3 as per the table below:
-
-VDDIO		1.8V		2.5V		3.3V
-0 = 		Disable
-1 =		1.66 mA		2.87 mA		4.02  mA
-2 =		3.33 mA		5.74 mA		8.03  mA
-3 =		4.99 mA		8.61 mA		12.05 mA
-
-Example:
-
-sgtl5000: codec@a {
-	compatible = "fsl,sgtl5000";
-	reg = <0x0a>;
-	#sound-dai-cells = <0>;
-	clocks = <&clks 150>;
-	micbias-resistor-k-ohms = <2>;
-	micbias-voltage-m-volts = <2250>;
-	VDDA-supply = <&reg_3p3v>;
-	VDDIO-supply = <&reg_3p3v>;
-};
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml
new file mode 100644
index 000000000000..2bc7f00ce4a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/sgtl5000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SGTL5000 Stereo Codec
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+properties:
+  compatible:
+    const: fsl,sgtl5000
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+
+  clocks:
+    items:
+      - description: the clock provider of SYS_MCLK
+
+  VDDA-supply:
+    description: the regulator provider of VDDA
+
+  VDDIO-supply:
+    description: the regulator provider of VDDIO
+
+  VDDD-supply:
+    description: the regulator provider of VDDD
+
+  micbias-resistor-k-ohms:
+    description: The bias resistor to be used in kOhms. The resistor can take
+      values of 2k, 4k or 8k. If set to 0 it will be off. If this node is not
+      mentioned or if the value is unknown, then micbias resistor is set to
+      4k.
+    enum: [ 0, 2, 4, 8 ]
+
+  micbias-voltage-m-volts:
+    description: The bias voltage to be used in mVolts. The voltage can take
+      values from 1.25V to 3V by 250mV steps. If this node is not mentioned
+      or the value is unknown, then the value is set to 1.25V.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum: [ 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 ]
+
+  lrclk-strength:
+    description: |
+      The LRCLK pad strength. Possible values are: 0, 1, 2 and 3 as per the
+      table below:
+
+        VDDIO		1.8V		2.5V		3.3V
+        0 =		Disable
+        1 =		1.66 mA		2.87 mA		4.02  mA
+        2 =		3.33 mA		5.74 mA		8.03  mA
+        3 =		4.99 mA		8.61 mA		12.05 mA
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum: [ 0, 1, 2, 3 ]
+
+  sclk-strength:
+    description: |
+      The SCLK pad strength. Possible values are: 0, 1, 2 and 3 as per the
+      table below:
+
+        VDDIO		1.8V		2.5V		3.3V
+        0 =		Disable
+        1 =		1.66 mA		2.87 mA		4.02  mA
+        2 =		3.33 mA		5.74 mA		8.03  mA
+        3 =		4.99 mA		8.61 mA		12.05 mA
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum: [ 0, 1, 2, 3 ]
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+  - clocks
+  - VDDA-supply
+  - VDDIO-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@a {
+            compatible = "fsl,sgtl5000";
+            reg = <0x0a>;
+            #sound-dai-cells = <0>;
+            clocks = <&clks 150>;
+            micbias-resistor-k-ohms = <2>;
+            micbias-voltage-m-volts = <2250>;
+            VDDA-supply = <&reg_3p3v>;
+            VDDIO-supply = <&reg_3p3v>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/simple-amplifier.txt b/Documentation/devicetree/bindings/sound/simple-amplifier.txt
deleted file mode 100644
index b1b097cc9b68..000000000000
--- a/Documentation/devicetree/bindings/sound/simple-amplifier.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Simple Amplifier Audio Driver
-
-Required properties:
-- compatible : "dioo,dio2125" or "simple-audio-amplifier"
-
-Optional properties:
-- enable-gpios : the gpio connected to the enable pin of the simple amplifier
-- VCC-supply   : power supply for the device, as covered
-                 in Documentation/devicetree/bindings/regulator/regulator.txt
-
-Example:
-
-amp: analog-amplifier {
-	compatible = "simple-audio-amplifier";
-	VCC-supply = <&regulator>;
-	enable-gpios = <&gpio GPIOH_3 0>;
-};
diff --git a/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml b/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml
new file mode 100644
index 000000000000..5428ba9e23a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/simple-audio-amplifier.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Audio Amplifier
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  compatible:
+    enum:
+      - dioo,dio2125
+      - simple-audio-amplifier
+
+  enable-gpios:
+    maxItems: 1
+
+  VCC-supply:
+    description: >
+      power supply for the device
+
+  sound-name-prefix: true
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/meson8-gpio.h>
+
+    analog-amplifier {
+        compatible = "simple-audio-amplifier";
+        VCC-supply = <&regulator>;
+        enable-gpios = <&gpio GPIOH_3 0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml
new file mode 100644
index 000000000000..b5fc35ee9b65
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/simple-audio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Audio Multiplexer
+
+maintainers:
+  - Alexandre Belloni <aleandre.belloni@bootlin.com>
+
+description: |
+  Simple audio multiplexers are driven using gpios, allowing to select which of
+  their input line is connected to the output line.
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  compatible:
+    const: simple-audio-mux
+
+  mux-gpios:
+    description: |
+      GPIOs used to select the input line.
+
+  sound-name-prefix: true
+
+required:
+  - compatible
+  - mux-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    mux {
+        compatible = "simple-audio-mux";
+        mux-gpios = <&gpio 3 0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
deleted file mode 100644
index 79954cd6e37b..000000000000
--- a/Documentation/devicetree/bindings/sound/simple-card.txt
+++ /dev/null
@@ -1,351 +0,0 @@
-Simple-Card:
-
-Simple-Card specifies audio DAI connections of SoC <-> codec.
-
-Required properties:
-
-- compatible				: "simple-audio-card"
-
-Optional properties:
-
-- simple-audio-card,name		: User specified audio sound card name, one string
-					  property.
-- simple-audio-card,widgets		: Please refer to widgets.txt.
-- simple-audio-card,routing		: A list of the connections between audio components.
-					  Each entry is a pair of strings, the first being the
-					  connection's sink, the second being the connection's
-					  source.
-- simple-audio-card,mclk-fs             : Multiplication factor between stream rate and codec
-					  mclk. When defined, mclk-fs property defined in
-					  dai-link sub nodes are ignored.
-- simple-audio-card,hp-det-gpio		: Reference to GPIO that signals when
-					  headphones are attached.
-- simple-audio-card,mic-det-gpio	: Reference to GPIO that signals when
-					  a microphone is attached.
-- simple-audio-card,aux-devs		: List of phandles pointing to auxiliary devices, such
-					  as amplifiers, to be added to the sound card.
-- simple-audio-card,pin-switches	: List of strings containing the widget names for
-					  which pin switches must be created.
-
-Optional subnodes:
-
-- simple-audio-card,dai-link		: Container for dai-link level
-					  properties and the CPU and CODEC
-					  sub-nodes. This container may be
-					  omitted when the card has only one
-					  DAI link. See the examples and the
-					  section below.
-
-Dai-link subnode properties and subnodes:
-
-If dai-link subnode is omitted and the subnode properties are directly
-under "sound"-node the subnode property and subnode names have to be
-prefixed with "simple-audio-card,"-prefix.
-
-Required dai-link subnodes:
-
-- cpu					: CPU   sub-node
-- codec					: CODEC sub-node
-
-Optional dai-link subnode properties:
-
-- format				: CPU/CODEC common audio format.
-					  "i2s", "right_j", "left_j" , "dsp_a"
-					  "dsp_b", "ac97", "pdm", "msb", "lsb"
-- frame-master				: Indicates dai-link frame master.
-					  phandle to a cpu or codec subnode.
-- bitclock-master			: Indicates dai-link bit clock master.
-					  phandle to a cpu or codec subnode.
-- bitclock-inversion			: bool property. Add this if the
-					  dai-link uses bit clock inversion.
-- frame-inversion			: bool property. Add this if the
-					  dai-link uses frame clock inversion.
-- mclk-fs             			: Multiplication factor between stream
-					  rate and codec mclk, applied only for
-					  the dai-link.
-
-For backward compatibility the frame-master and bitclock-master
-properties can be used as booleans in codec subnode to indicate if the
-codec is the dai-link frame or bit clock master. In this case there
-should be no dai-link node, the same properties should not be present
-at sound-node level, and the bitclock-inversion and frame-inversion
-properties should also be placed in the codec node if needed.
-
-Required CPU/CODEC subnodes properties:
-
-- sound-dai				: phandle and port of CPU/CODEC
-
-Optional CPU/CODEC subnodes properties:
-
-- dai-tdm-slot-num			: Please refer to tdm-slot.txt.
-- dai-tdm-slot-width			: Please refer to tdm-slot.txt.
-- clocks / system-clock-frequency	: specify subnode's clock if needed.
-					  it can be specified via "clocks" if system has
-					  clock node (= common clock), or "system-clock-frequency"
-					  (if system doens't support common clock)
-					  If a clock is specified, it is
-					  enabled with clk_prepare_enable()
-					  in dai startup() and disabled with
-					  clk_disable_unprepare() in dai
-					  shutdown().
-					  If a clock is specified and a
-					  multiplication factor is given with
-					  mclk-fs, the clock will be set to the
-					  calculated mclk frequency when the
-					  stream starts.
-- system-clock-direction-out		: specifies clock direction as 'out' on
-					  initialization. It is useful for some aCPUs with
-					  fixed clocks.
-
--------------------------------------------
-Example 1 - single DAI link:
--------------------------------------------
-
-sound {
-	compatible = "simple-audio-card";
-	simple-audio-card,name = "VF610-Tower-Sound-Card";
-	simple-audio-card,format = "left_j";
-	simple-audio-card,bitclock-master = <&dailink0_master>;
-	simple-audio-card,frame-master = <&dailink0_master>;
-	simple-audio-card,widgets =
-		"Microphone", "Microphone Jack",
-		"Headphone", "Headphone Jack",
-		"Speaker", "External Speaker";
-	simple-audio-card,routing =
-		"MIC_IN", "Microphone Jack",
-		"Headphone Jack", "HP_OUT",
-		"External Speaker", "LINE_OUT";
-
-	simple-audio-card,cpu {
-		sound-dai = <&sh_fsi2 0>;
-	};
-
-	dailink0_master: simple-audio-card,codec {
-		sound-dai = <&ak4648>;
-		clocks = <&osc>;
-	};
-};
-
-&i2c0 {
-	ak4648: ak4648@12 {
-		#sound-dai-cells = <0>;
-		compatible = "asahi-kasei,ak4648";
-		reg = <0x12>;
-	};
-};
-
-sh_fsi2: sh_fsi2@ec230000 {
-	#sound-dai-cells = <1>;
-	compatible = "renesas,sh_fsi2";
-	reg = <0xec230000 0x400>;
-	interrupt-parent = <&gic>;
-	interrupts = <0 146 0x4>;
-};
-
--------------------------------------------
-Example 2 - many DAI links:
--------------------------------------------
-
-sound {
-	compatible = "simple-audio-card";
-	simple-audio-card,name = "Cubox Audio";
-
-	simple-audio-card,dai-link@0 {		/* I2S - HDMI */
-		reg = <0>;
-		format = "i2s";
-		cpu {
-			sound-dai = <&audio1 0>;
-		};
-		codec {
-			sound-dai = <&tda998x 0>;
-		};
-	};
-
-	simple-audio-card,dai-link@1 {		/* S/PDIF - HDMI */
-		reg = <1>;
-		cpu {
-			sound-dai = <&audio1 1>;
-		};
-		codec {
-			sound-dai = <&tda998x 1>;
-		};
-	};
-
-	simple-audio-card,dai-link@2 {		/* S/PDIF - S/PDIF */
-		reg = <2>;
-		cpu {
-			sound-dai = <&audio1 1>;
-		};
-		codec {
-			sound-dai = <&spdif_codec>;
-		};
-	};
-};
-
--------------------------------------------
-Example 3 - route audio from IMX6 SSI2 through TLV320DAC3100 codec
-through TPA6130A2 amplifier to headphones:
--------------------------------------------
-
-&i2c0 {
-	codec: tlv320dac3100@18 {
-		compatible = "ti,tlv320dac3100";
-		...
-	}
-
-	amp: tpa6130a2@60 {
-		compatible = "ti,tpa6130a2";
-		...
-	}
-}
-
-sound {
-	compatible = "simple-audio-card";
-	...
-	simple-audio-card,widgets =
-		"Headphone", "Headphone Jack";
-	simple-audio-card,routing =
-		"Headphone Jack", "HPLEFT",
-		"Headphone Jack", "HPRIGHT",
-		"LEFTIN", "HPL",
-		"RIGHTIN", "HPR";
-	simple-audio-card,aux-devs = <&amp>;
-	simple-audio-card,cpu {
-		sound-dai = <&ssi2>;
-	};
-	simple-audio-card,codec {
-		sound-dai = <&codec>;
-		clocks = ...
-	};
-};
-
--------------------------------------------
-Example 4. Sampling Rate Conversion
--------------------------------------------
-
-sound {
-	compatible = "simple-audio-card";
-
-	simple-audio-card,name = "rsnd-ak4643";
-	simple-audio-card,format = "left_j";
-	simple-audio-card,bitclock-master = <&sndcodec>;
-	simple-audio-card,frame-master = <&sndcodec>;
-
-	simple-audio-card,convert-rate = <48000>;
-
-	simple-audio-card,prefix = "ak4642";
-	simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
-			"DAI0 Capture", "ak4642 Capture";
-
-	sndcpu: simple-audio-card,cpu {
-		sound-dai = <&rcar_sound>;
-	};
-
-	sndcodec: simple-audio-card,codec {
-		sound-dai = <&ak4643>;
-		system-clock-frequency = <11289600>;
-	};
-};
-
--------------------------------------------
-Example 5. 2 CPU 1 Codec (Mixing)
--------------------------------------------
-sound {
-	compatible = "simple-audio-card";
-
-	simple-audio-card,name = "rsnd-ak4643";
-	simple-audio-card,format = "left_j";
-	simple-audio-card,bitclock-master = <&dpcmcpu>;
-	simple-audio-card,frame-master = <&dpcmcpu>;
-
-	simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
-			"ak4642 Playback", "DAI1 Playback";
-
-	dpcmcpu: cpu@0 {
-		sound-dai = <&rcar_sound 0>;
-	};
-
-	cpu@1 {
-		sound-dai = <&rcar_sound 1>;
-	};
-
-	codec {
-		prefix = "ak4642";
-		sound-dai = <&ak4643>;
-		clocks = <&audio_clock>;
-	};
-};
-
--------------------------------------------
-Example 6 - many DAI links with DPCM:
--------------------------------------------
-
-CPU0 ------ ak4613
-CPU1 ------ PCM3168A-p  /* DPCM 1ch/2ch */
-CPU2 --/                /* DPCM 3ch/4ch */
-CPU3 --/                /* DPCM 5ch/6ch */
-CPU4 --/                /* DPCM 7ch/8ch */
-CPU5 ------ PCM3168A-c
-
-sound {
-	compatible = "simple-audio-card";
-
-	simple-audio-card,routing =
-		  "pcm3168a Playback", "DAI1 Playback",
-		  "pcm3168a Playback", "DAI2 Playback",
-		  "pcm3168a Playback", "DAI3 Playback",
-		  "pcm3168a Playback", "DAI4 Playback";
-
-	simple-audio-card,dai-link@0 {
-		format = "left_j";
-		bitclock-master = <&sndcpu0>;
-		frame-master = <&sndcpu0>;
-
-		sndcpu0: cpu {
-			sound-dai = <&rcar_sound 0>;
-		};
-		codec {
-			sound-dai = <&ak4613>;
-		};
-	};
-	simple-audio-card,dai-link@1 {
-		format = "i2s";
-		bitclock-master = <&sndcpu1>;
-		frame-master = <&sndcpu1>;
-
-		convert-channels = <8>; /* TDM Split */
-
-		sndcpu1: cpu@0 {
-			sound-dai = <&rcar_sound 1>;
-		};
-		cpu@1 {
-			sound-dai = <&rcar_sound 2>;
-		};
-		cpu@2 {
-			sound-dai = <&rcar_sound 3>;
-		};
-		cpu@3 {
-			sound-dai = <&rcar_sound 4>;
-		};
-		codec {
-			mclk-fs = <512>;
-			prefix = "pcm3168a";
-			dai-tdm-slot-num = <8>;
-			sound-dai = <&pcm3168a 0>;
-		};
-	};
-	simple-audio-card,dai-link@2 {
-		format = "i2s";
-		bitclock-master = <&sndcpu2>;
-		frame-master = <&sndcpu2>;
-
-		sndcpu2: cpu {
-			sound-dai = <&rcar_sound 5>;
-		};
-		codec {
-			mclk-fs = <512>;
-			prefix = "pcm3168a";
-			sound-dai = <&pcm3168a 1>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml
new file mode 100644
index 000000000000..ed19899bc94b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/simple-card.yaml
@@ -0,0 +1,500 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/simple-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Audio Card Driver
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+definitions:
+
+  frame-master:
+    description: Indicates dai-link frame master.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  bitclock-master:
+    description: Indicates dai-link bit clock master
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  frame-inversion:
+    description: dai-link uses frame clock inversion
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  bitclock-inversion:
+    description: dai-link uses bit clock inversion
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  dai-tdm-slot-num:
+    description: see tdm-slot.txt.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  dai-tdm-slot-width:
+    description: see tdm-slot.txt.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  system-clock-frequency:
+    description: |
+      If a clock is specified and a multiplication factor is given with
+      mclk-fs, the clock will be set to the calculated mclk frequency
+      when the stream starts.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  system-clock-direction-out:
+    description: |
+      specifies clock direction as 'out' on initialization.
+      It is useful for some aCPUs with fixed clocks.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  system-clock-fixed:
+    description: |
+      Specifies that the clock frequency should not be modified.
+      Implied when system-clock-frequency is specified, but can be used when
+      a clock is mapped to the device whose frequency cannot or should not be
+      changed. When mclk-fs is also specified, this restricts the device to a
+      single fixed sampling rate.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  mclk-fs:
+    description: |
+      Multiplication factor between stream rate and codec mclk.
+      When defined, mclk-fs property defined in dai-link sub nodes are ignored.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  aux-devs:
+    description: |
+      List of phandles pointing to auxiliary devices, such
+      as amplifiers, to be added to the sound card.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  convert-rate:
+    description: CPU to Codec rate convert.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  convert-channels:
+    description: CPU to Codec rate channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  prefix:
+    description: "device name prefix"
+    $ref: /schemas/types.yaml#/definitions/string
+
+  label:
+    maxItems: 1
+
+  routing:
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  widgets:
+    description: User specified audio sound widgets.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  pin-switches:
+    description: the widget names for which pin switches must be created.
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  format:
+    description: audio format.
+    items:
+      enum:
+        - i2s
+        - right_j
+        - left_j
+        - dsp_a
+        - dsp_b
+        - ac97
+        - pdm
+        - msb
+        - lsb
+
+  dai:
+    type: object
+    properties:
+      sound-dai:
+        maxItems: 1
+
+      # common properties
+      mclk-fs:
+        $ref: "#/definitions/mclk-fs"
+      prefix:
+        $ref: "#/definitions/prefix"
+      frame-inversion:
+        $ref: "#/definitions/frame-inversion"
+      bitclock-inversion:
+        $ref: "#/definitions/bitclock-inversion"
+      frame-master:
+        $ref: /schemas/types.yaml#/definitions/flag
+      bitclock-master:
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      dai-tdm-slot-num:
+        $ref: "#/definitions/dai-tdm-slot-num"
+      dai-tdm-slot-width:
+        $ref: "#/definitions/dai-tdm-slot-width"
+      clocks:
+        maxItems: 1
+      system-clock-frequency:
+        $ref: "#/definitions/system-clock-frequency"
+      system-clock-direction-out:
+        $ref: "#/definitions/system-clock-direction-out"
+      system-clock-fixed:
+        $ref: "#/definitions/system-clock-fixed"
+    required:
+      - sound-dai
+
+properties:
+  compatible:
+    contains:
+      enum:
+        - simple-audio-card
+        - simple-scu-audio-card
+
+  "#address-cells":
+    const: 1
+  "#size-cells":
+    const: 0
+
+  label:
+    $ref: "#/definitions/label"
+
+  simple-audio-card,name:
+    description: User specified audio sound card name.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  simple-audio-card,widgets:
+    $ref: "#/definitions/widgets"
+  simple-audio-card,routing:
+    $ref: "#/definitions/routing"
+
+  # common properties
+  simple-audio-card,frame-master:
+    $ref: "#/definitions/frame-master"
+  simple-audio-card,bitclock-master:
+    $ref: "#/definitions/bitclock-master"
+  simple-audio-card,frame-inversion:
+    $ref: "#/definitions/frame-inversion"
+  simple-audio-card,bitclock-inversion:
+    $ref: "#/definitions/bitclock-inversion"
+  simple-audio-card,format:
+    $ref: "#/definitions/format"
+  simple-audio-card,mclk-fs:
+    $ref: "#/definitions/mclk-fs"
+  simple-audio-card,aux-devs:
+    $ref: "#/definitions/aux-devs"
+  simple-audio-card,convert-rate:
+    $ref: "#/definitions/convert-rate"
+  simple-audio-card,convert-channels:
+    $ref: "#/definitions/convert-channels"
+  simple-audio-card,prefix:
+    $ref: "#/definitions/prefix"
+  simple-audio-card,pin-switches:
+    $ref: "#/definitions/pin-switches"
+  simple-audio-card,hp-det-gpio:
+    maxItems: 1
+  simple-audio-card,mic-det-gpio:
+    maxItems: 1
+
+patternProperties:
+  "^simple-audio-card,cpu(@[0-9a-f]+)?$":
+    $ref: "#/definitions/dai"
+  "^simple-audio-card,codec(@[0-9a-f]+)?$":
+    $ref: "#/definitions/dai"
+
+  "^simple-audio-card,dai-link(@[0-9a-f]+)?$":
+    description: |
+      Container for dai-link level properties and the CPU and CODEC sub-nodes.
+      This container may be omitted when the card has only one DAI link.
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+
+      # common properties
+      frame-master:
+        $ref: "#/definitions/frame-master"
+      bitclock-master:
+        $ref: "#/definitions/bitclock-master"
+      frame-inversion:
+        $ref: "#/definitions/frame-inversion"
+      bitclock-inversion:
+        $ref: "#/definitions/bitclock-inversion"
+      format:
+        $ref: "#/definitions/format"
+      mclk-fs:
+        $ref: "#/definitions/mclk-fs"
+      aux-devs:
+        $ref: "#/definitions/aux-devs"
+      convert-rate:
+        $ref: "#/definitions/convert-rate"
+      convert-channels:
+        $ref: "#/definitions/convert-channels"
+      prefix:
+        $ref: "#/definitions/prefix"
+      pin-switches:
+        $ref: "#/definitions/pin-switches"
+      hp-det-gpio:
+        maxItems: 1
+      mic-det-gpio:
+        maxItems: 1
+
+    patternProperties:
+      "^cpu(@[0-9a-f]+)?":
+        $ref: "#/definitions/dai"
+      "^codec(@[0-9a-f]+)?":
+        $ref: "#/definitions/dai"
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+#--------------------
+# single DAI link
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+        simple-audio-card,name = "VF610-Tower-Sound-Card";
+        simple-audio-card,format = "left_j";
+        simple-audio-card,bitclock-master = <&dailink0_master>;
+        simple-audio-card,frame-master = <&dailink0_master>;
+        simple-audio-card,widgets =
+                "Microphone", "Microphone Jack",
+                "Headphone", "Headphone Jack",
+                "Speaker", "External Speaker";
+        simple-audio-card,routing =
+                "MIC_IN", "Microphone Jack",
+                "Headphone Jack", "HP_OUT",
+                "External Speaker", "LINE_OUT";
+
+        simple-audio-card,cpu {
+            sound-dai = <&sh_fsi2 0>;
+        };
+
+        dailink0_master: simple-audio-card,codec {
+            sound-dai = <&ak4648>;
+            clocks = <&osc>;
+        };
+    };
+
+#--------------------
+# Multi DAI links
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+        simple-audio-card,name = "Cubox Audio";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        simple-audio-card,dai-link@0 {		/* I2S - HDMI */
+            reg = <0>;
+            format = "i2s";
+            cpu {
+                sound-dai = <&audio0>;
+            };
+            codec {
+                sound-dai = <&tda998x0>;
+            };
+        };
+
+        simple-audio-card,dai-link@1 {		/* S/PDIF - HDMI */
+            reg = <1>;
+            cpu {
+                sound-dai = <&audio1>;
+            };
+            codec {
+                sound-dai = <&tda998x1>;
+            };
+        };
+
+        simple-audio-card,dai-link@2 {		/* S/PDIF - S/PDIF */
+            reg = <2>;
+            cpu {
+                sound-dai = <&audio2>;
+            };
+            codec {
+                sound-dai = <&spdif_codec>;
+            };
+        };
+    };
+
+#--------------------
+# route audio from IMX6 SSI2 through TLV320DAC3100 codec
+# through TPA6130A2 amplifier to headphones:
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,widgets =
+            "Headphone", "Headphone Jack";
+        simple-audio-card,routing =
+            "Headphone Jack", "HPLEFT",
+            "Headphone Jack", "HPRIGHT",
+            "LEFTIN", "HPL",
+            "RIGHTIN", "HPR";
+        simple-audio-card,aux-devs = <&amp>;
+        simple-audio-card,cpu {
+            sound-dai = <&ssi2>;
+        };
+        simple-audio-card,codec {
+            sound-dai = <&codec>;
+            clocks = <&clocks>;
+        };
+    };
+
+#--------------------
+# Sampling Rate Conversion
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,name = "rsnd-ak4643";
+        simple-audio-card,format = "left_j";
+        simple-audio-card,bitclock-master = <&sndcodec>;
+        simple-audio-card,frame-master = <&sndcodec>;
+
+        simple-audio-card,convert-rate = <48000>;
+
+        simple-audio-card,prefix = "ak4642";
+        simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
+                                    "DAI0 Capture", "ak4642 Capture";
+
+        sndcpu: simple-audio-card,cpu {
+            sound-dai = <&rcar_sound>;
+        };
+
+        sndcodec: simple-audio-card,codec {
+            sound-dai = <&ak4643>;
+            system-clock-frequency = <11289600>;
+        };
+    };
+
+#--------------------
+# 2 CPU 1 Codec (Mixing)
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        simple-audio-card,name = "rsnd-ak4643";
+        simple-audio-card,format = "left_j";
+        simple-audio-card,bitclock-master = <&dpcmcpu>;
+        simple-audio-card,frame-master = <&dpcmcpu>;
+
+        simple-audio-card,convert-rate = <48000>;
+        simple-audio-card,convert-channels = <2>;
+
+        simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
+                                    "ak4642 Playback", "DAI1 Playback";
+
+        dpcmcpu: simple-audio-card,cpu@0 {
+            reg = <0>;
+            sound-dai = <&rcar_sound 0>;
+        };
+
+        simple-audio-card,cpu@1 {
+            reg = <1>;
+            sound-dai = <&rcar_sound 1>;
+        };
+
+        simple-audio-card,codec {
+            prefix = "ak4642";
+            sound-dai = <&ak4643>;
+            clocks = <&audio_clock>;
+        };
+    };
+
+#--------------------
+# Multi DAI links with DPCM:
+#
+# CPU0 ------ ak4613
+# CPU1 ------ PCM3168A-p  /* DPCM 1ch/2ch */
+# CPU2 --/                /* DPCM 3ch/4ch */
+# CPU3 --/                /* DPCM 5ch/6ch */
+# CPU4 --/                /* DPCM 7ch/8ch */
+# CPU5 ------ PCM3168A-c
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        simple-audio-card,routing =
+            "pcm3168a Playback", "DAI1 Playback",
+            "pcm3168a Playback", "DAI2 Playback",
+            "pcm3168a Playback", "DAI3 Playback",
+            "pcm3168a Playback", "DAI4 Playback";
+
+        simple-audio-card,dai-link@0 {
+            reg = <0>;
+            format = "left_j";
+            bitclock-master = <&sndcpu0>;
+            frame-master = <&sndcpu0>;
+
+            sndcpu0: cpu {
+                sound-dai = <&rcar_sound 0>;
+            };
+            codec {
+                sound-dai = <&ak4613>;
+            };
+        };
+
+        simple-audio-card,dai-link@1 {
+            reg = <1>;
+            format = "i2s";
+            bitclock-master = <&sndcpu1>;
+            frame-master = <&sndcpu1>;
+
+            convert-channels = <8>; /* TDM Split */
+
+            sndcpu1: cpu0 {
+                sound-dai = <&rcar_sound 1>;
+            };
+            cpu1 {
+                sound-dai = <&rcar_sound 2>;
+            };
+            cpu2 {
+                sound-dai = <&rcar_sound 3>;
+            };
+            cpu3 {
+                sound-dai = <&rcar_sound 4>;
+            };
+            codec {
+                mclk-fs = <512>;
+                prefix = "pcm3168a";
+                dai-tdm-slot-num = <8>;
+                sound-dai = <&pcm3168a 0>;
+            };
+        };
+
+        simple-audio-card,dai-link@2 {
+            reg = <2>;
+            format = "i2s";
+            bitclock-master = <&sndcpu2>;
+            frame-master = <&sndcpu2>;
+
+            sndcpu2: cpu {
+                sound-dai = <&rcar_sound 5>;
+            };
+            codec {
+                mclk-fs = <512>;
+                prefix = "pcm3168a";
+                sound-dai = <&pcm3168a 1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/sirf-audio-codec.txt b/Documentation/devicetree/bindings/sound/sirf-audio-codec.txt
deleted file mode 100644
index 062f5ec36f9b..000000000000
--- a/Documentation/devicetree/bindings/sound/sirf-audio-codec.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-SiRF internal audio CODEC
-
-Required properties:
-
-  - compatible : "sirf,atlas6-audio-codec" or "sirf,prima2-audio-codec"
-
-  - reg : the register address of the device.
-
-  - clocks: the clock of SiRF internal audio codec
-
-Example:
-
-audiocodec: audiocodec@b0040000 {
-	compatible = "sirf,atlas6-audio-codec";
-	reg = <0xb0040000 0x10000>;
-	clocks = <&clks 27>;
-};
diff --git a/Documentation/devicetree/bindings/sound/sirf-usp.txt b/Documentation/devicetree/bindings/sound/sirf-usp.txt
deleted file mode 100644
index 02f85b32d359..000000000000
--- a/Documentation/devicetree/bindings/sound/sirf-usp.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* SiRF SoC USP module
-
-Required properties:
-- compatible: "sirf,prima2-usp-pcm"
-- reg: Base address and size entries:
-- dmas: List of DMA controller phandle and DMA request line ordered pairs.
-- dma-names: Identifier string for each DMA request line in the dmas property.
-  These strings correspond 1:1 with the ordered pairs in dmas.
-
-  One of the DMA channels will be responsible for transmission (should be
-  named "tx") and one for reception (should be named "rx").
-
-- clocks: USP controller clock source
-- pinctrl-names: Must contain a "default" entry.
-- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
-
-Example:
-usp0: usp@b0080000 {
-	compatible = "sirf,prima2-usp-pcm";
-	reg = <0xb0080000 0x10000>;
-	clocks = <&clks 28>;
-	dmas = <&dmac1 1>, <&dmac1 2>;
-	dma-names = "rx", "tx";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usp0_only_utfs_pins_a>;
-};
-
diff --git a/Documentation/devicetree/bindings/sound/snow.txt b/Documentation/devicetree/bindings/sound/snow.txt
deleted file mode 100644
index 80fd9a87bb3f..000000000000
--- a/Documentation/devicetree/bindings/sound/snow.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Audio Binding for Snow boards
-
-Required properties:
-- compatible : Can be one of the following,
-			"google,snow-audio-max98090" or
-			"google,snow-audio-max98091" or
-			"google,snow-audio-max98095"
-- samsung,i2s-controller (deprecated): The phandle of the Samsung I2S controller
-- samsung,audio-codec (deprecated): The phandle of the audio codec
-
-Required sub-nodes:
-
- - 'cpu' subnode with a 'sound-dai' property containing the phandle of the I2S
-    controller
- - 'codec' subnode with a 'sound-dai' property containing list of phandles
-    to the CODEC nodes, first entry must be the phandle of the MAX98090,
-    MAX98091 or MAX98095 CODEC (exact device type is indicated by the compatible
-    string) and the second entry must be the phandle of the HDMI IP block node
-
-Optional:
-- samsung,model: The name of the sound-card
-
-Example:
-
-sound {
-		compatible = "google,snow-audio-max98095";
-
-		samsung,model = "Snow-I2S-MAX98095";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&max98095>;
-};
diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
new file mode 100644
index 000000000000..4b0795819064
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/snps,designware-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare I2S controller
+
+maintainers:
+  - Jose Abreu <joabreu@synopsys.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: canaan,k210-i2s
+          - const: snps,designware-i2s
+      - enum:
+          - snps,designware-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      The interrupt line number for the I2S controller. Add this
+      parameter if the I2S controller that you are using does not
+      support DMA.
+    maxItems: 1
+
+  clocks:
+    description: Sampling rate reference clock
+    maxItems: 1
+
+  clock-names:
+    const: i2sclk
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+    minItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+    minItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: canaan,k210-i2s
+
+then:
+  properties:
+    "#sound-dai-cells":
+      const: 1
+
+else:
+  properties:
+    "#sound-dai-cells":
+      const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+oneOf:
+  - required:
+      - dmas
+      - dma-names
+  - required:
+      - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc_i2s: i2s@7ff90000 {
+      compatible = "snps,designware-i2s";
+      reg = <0x7ff90000 0x1000>;
+      clocks = <&scpi_i2sclk 0>;
+      clock-names = "i2sclk";
+      #sound-dai-cells = <0>;
+      dmas = <&dma0 5>;
+      dma-names = "tx";
+    };
diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml
new file mode 100644
index 000000000000..70f62ecd6eb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/socionext,uniphier-aio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier AIO audio system
+
+maintainers:
+  - <alsa-devel@alsa-project.org>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-ld11-aio
+      - socionext,uniphier-ld20-aio
+      - socionext,uniphier-pxs2-aio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: aio
+
+  clocks:
+    maxItems: 1
+
+  reset-names:
+    const: aio
+
+  resets:
+    maxItems: 1
+
+  socionext,syscon:
+    description: |
+      Specifies a phandle to soc-glue, which is used for changing mode of S/PDIF
+      signal pin to output from Hi-Z. This property is optional if you use I2S
+      signal pins only.
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  "#sound-dai-cells":
+    const: 1
+
+patternProperties:
+  "^port@[0-9]$":
+    description: |
+      Port number of DT node is specified by the following DAI channels that
+      depends on SoC.
+      ld11-aio,ld20-aio:
+        0: hdmi
+        1: pcmin2
+        2: line
+        3: hpcmout1
+        4: pcmout3
+        5: hiecout1
+        6: epcmout2
+        7: epcmout3
+        8: hieccompout1
+      pxs2-aio:
+        0: hdmi
+        1: line
+        2: aux
+        3: hiecout1
+        4: iecout1
+        5: hieccompout1
+        6: ieccompout1
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - reset-names
+  - resets
+  - "#sound-dai-cells"
+
+examples:
+  - |
+    audio@56000000 {
+        compatible = "socionext,uniphier-ld20-aio";
+        reg = <0x56000000 0x80000>;
+        interrupts = <0 144 4>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_aout>;
+        clock-names = "aio";
+        clocks = <&sys_clk 40>;
+        reset-names = "aio";
+        resets = <&sys_rst 40>;
+        #sound-dai-cells = <1>;
+        socionext,syscon = <&soc_glue>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml
new file mode 100644
index 000000000000..be6acfda9999
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/socionext,uniphier-evea.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier EVEA SoC-internal sound codec
+
+maintainers:
+  - <alsa-devel@alsa-project.org>
+
+properties:
+  compatible:
+    const: socionext,uniphier-evea
+
+  reg:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: evea
+      - const: exiv
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: evea
+      - const: exiv
+      - const: adamv
+
+  resets:
+    minItems: 3
+    maxItems: 3
+
+  "#sound-dai-cells":
+    const: 1
+
+patternProperties:
+  "^port@[0-9]$":
+    description: |
+      Port number of DT node is specified by the following DAI channels.
+        0: line1
+        1: hp
+        2: line2
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - reset-names
+  - resets
+  - "#sound-dai-cells"
+
+examples:
+  - |
+    codec@57900000 {
+        compatible = "socionext,uniphier-evea";
+        reg = <0x57900000 0x1000>;
+        clock-names = "evea", "exiv";
+        clocks = <&sys_clk 41>, <&sys_clk 42>;
+        reset-names = "evea", "exiv", "adamv";
+        resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
+        #sound-dai-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/sound-dai.yaml b/Documentation/devicetree/bindings/sound/sound-dai.yaml
new file mode 100644
index 000000000000..ff9036e43c44
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sound-dai.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/sound-dai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Digital Audio Interface consumer
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+select: true
+
+properties:
+  sound-dai:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A phandle plus args to digital audio interface provider(s)
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/sound/spdif-transmitter.txt b/Documentation/devicetree/bindings/sound/spdif-transmitter.txt
deleted file mode 100644
index 55a85841dd85..000000000000
--- a/Documentation/devicetree/bindings/sound/spdif-transmitter.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Device-Tree bindings for dummy spdif transmitter
-
-Required properties:
-	- compatible: should be "linux,spdif-dit".
-
-Example node:
-
-	codec: spdif-transmitter {
-		compatible = "linux,spdif-dit";
-	};
diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
index 4d51f3f5ea98..a6ffcdec6f6a 100644
--- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
@@ -5,7 +5,7 @@ codec or external codecs.
 
 sti sound drivers allows to expose sti SoC audio interface through the
 generic ASoC simple card. For details about sound card declaration please refer to
-Documentation/devicetree/bindings/sound/simple-card.txt.
+Documentation/devicetree/bindings/sound/simple-card.yaml.
 
 1) sti-uniperiph-dai: audio dai device.
 ---------------------------------------
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt b/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt
deleted file mode 100644
index 864f5b00b031..000000000000
--- a/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-STMicroelectronics Audio Digital Filter Sigma Delta modulators(DFSDM)
-
-The DFSDM allows PDM microphones capture through SPI interface. The Audio
-interface is seems as a sub block of the DFSDM device.
-For details on DFSDM bindings refer to ../iio/adc/st,stm32-dfsdm-adc.txt
-
-Required properties:
-  - compatible: "st,stm32h7-dfsdm-dai".
-
-  - #sound-dai-cells : Must be equal to 0
-
-  - io-channels : phandle to iio dfsdm instance node.
-
-Example of a sound card using audio DFSDM node.
-
-	sound_card {
-		compatible = "audio-graph-card";
-
-		dais = <&cpu_port>;
-	};
-
-	dfsdm: dfsdm@40017000 {
-		compatible = "st,stm32h7-dfsdm";
-		reg = <0x40017000 0x400>;
-		clocks = <&rcc DFSDM1_CK>;
-		clock-names = "dfsdm";
-		#interrupt-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dfsdm_adc0: filter@0 {
-			compatible = "st,stm32-dfsdm-dmic";
-			reg = <0>;
-			interrupts = <110>;
-			dmas = <&dmamux1 101 0x400 0x00>;
-			dma-names = "rx";
-			st,adc-channels = <1>;
-			st,adc-channel-names = "dmic0";
-			st,adc-channel-types = "SPI_R";
-			st,adc-channel-clk-src = "CLKOUT";
-			st,filter-order = <5>;
-
-			dfsdm_dai0: dfsdm-dai {
-				compatible = "st,stm32h7-dfsdm-dai";
-				#sound-dai-cells = <0>;
-				io-channels = <&dfsdm_adc0 0>;
-				cpu_port: port {
-				dfsdm_endpoint: endpoint {
-					remote-endpoint = <&dmic0_endpoint>;
-				};
-			};
-		};
-	};
-
-	dmic0: dmic@0 {
-		compatible = "dmic-codec";
-		#sound-dai-cells = <0>;
-		port {
-			dmic0_endpoint: endpoint {
-				remote-endpoint = <&dfsdm_endpoint>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
deleted file mode 100644
index cbf24bcd1b8d..000000000000
--- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-STMicroelectronics STM32 SPI/I2S Controller
-
-The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
-Only some SPI instances support I2S.
-
-Required properties:
-  - compatible: Must be "st,stm32h7-i2s"
-  - reg: Offset and length of the device's register set.
-  - interrupts: Must contain the interrupt line id.
-  - clocks: Must contain phandle and clock specifier pairs for each entry
-	in clock-names.
-  - clock-names: Must contain "i2sclk", "pclk", "x8k" and "x11k".
-	"i2sclk": clock which feeds the internal clock generator
-	"pclk": clock which feeds the peripheral bus interface
-	"x8k": I2S parent clock for sampling rates multiple of 8kHz.
-	"x11k": I2S parent clock for sampling rates multiple of 11.025kHz.
-  - dmas: DMA specifiers for tx and rx dma.
-    See Documentation/devicetree/bindings/dma/stm32-dma.txt.
-  - dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
-  - pinctrl-names: should contain only value "default"
-  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
-
-Optional properties:
-  - resets: Reference to a reset controller asserting the reset controller
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-graph.txt.
-
-Example:
-sound_card {
-	compatible = "audio-graph-card";
-	dais = <&i2s2_port>;
-};
-
-i2s2: audio-controller@40003800 {
-	compatible = "st,stm32h7-i2s";
-	reg = <0x40003800 0x400>;
-	interrupts = <36>;
-	clocks = <&rcc PCLK1>, <&rcc SPI2_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
-	clock-names = "pclk", "i2sclk",  "x8k", "x11k";
-	dmas = <&dmamux2 2 39 0x400 0x1>,
-           <&dmamux2 3 40 0x400 0x1>;
-	dma-names = "rx", "tx";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2s2>;
-
-	i2s2_port: port@0 {
-		cpu_endpoint: endpoint {
-			remote-endpoint = <&codec_endpoint>;
-			format = "i2s";
-		};
-	};
-};
-
-audio-codec {
-	codec_port: port@0 {
-		codec_endpoint: endpoint {
-			remote-endpoint = <&cpu_endpoint>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
new file mode 100644
index 000000000000..d3966ae04ad0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 SPI/I2S Controller
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@foss.st.com>
+
+description:
+  The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
+  Only some SPI instances support I2S.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-i2s
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock feeding the peripheral bus interface.
+      - description: clock feeding the internal clock generator.
+      - description: I2S parent clock for sampling rates multiple of 8kHz.
+      - description: I2S parent clock for sampling rates multiple of 11.025kHz.
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: i2sclk
+      - const: x8k
+      - const: x11k
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: audio capture DMA.
+      - description: audio playback DMA.
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  resets:
+    maxItems: 1
+
+  "#clock-cells":
+    description: Configure the I2S device as MCLK clock provider.
+    const: 0
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    i2s2: audio-controller@4000b000 {
+        compatible = "st,stm32h7-i2s";
+        #sound-dai-cells = <0>;
+        reg = <0x4000b000 0x400>;
+        clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+        clock-names = "pclk", "i2sclk", "x8k", "x11k";
+        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 39 0x400 0x01>,
+               <&dmamux1 40 0x400 0x01>;
+        dma-names = "rx", "tx";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2s2_pins_a>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
deleted file mode 100644
index c42b91e525fa..000000000000
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-STMicroelectronics STM32 Serial Audio Interface (SAI).
-
-The SAI interface (Serial Audio Interface) offers a wide set of audio protocols
-as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
-The SAI contains two independent audio sub-blocks. Each sub-block has
-its own clock generator and I/O lines controller.
-
-Required properties:
-  - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai"
-  - reg: Base address and size of SAI common register set.
-  - clocks: Must contain phandle and clock specifier pairs for each entry
-	in clock-names.
-  - clock-names: Must contain "pclk" "x8k" and "x11k"
-	"pclk": Clock which feeds the peripheral bus interface.
-	        Mandatory for "st,stm32h7-sai" compatible.
-	        Not used for "st,stm32f4-sai" compatible.
-	"x8k": SAI parent clock for sampling rates multiple of 8kHz.
-	"x11k": SAI parent clock for sampling rates multiple of 11.025kHz.
-  - interrupts: cpu DAI interrupt line shared by SAI sub-blocks
-
-Optional properties:
-  - resets: Reference to a reset controller asserting the SAI
-
-SAI subnodes:
-Two subnodes corresponding to SAI sub-block instances A et B can be defined.
-Subnode can be omitted for unsused sub-block.
-
-SAI subnodes required properties:
-  - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b"
-	for SAI sub-block A or B respectively.
-  - reg: Base address and size of SAI sub-block register set.
-  - clocks: Must contain one phandle and clock specifier pair
-	for sai_ck which feeds the internal clock generator.
-	If the SAI shares a master clock, with another SAI set as MCLK
-	clock provider, SAI provider phandle must be specified here.
-  - clock-names: Must contain "sai_ck".
-	Must also contain "MCLK", if SAI shares a master clock,
-	with a SAI set as MCLK clock provider.
-  - dmas: see Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
-  - dma-names: identifier string for each DMA request line
-	"tx": if sai sub-block is configured as playback DAI
-	"rx": if sai sub-block is configured as capture DAI
-  - pinctrl-names: should contain only value "default"
-  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
-
-SAI subnodes Optional properties:
-  - st,sync: specify synchronization mode.
-	By default SAI sub-block is in asynchronous mode.
-	This property sets SAI sub-block as slave of another SAI sub-block.
-	Must contain the phandle and index of the sai sub-block providing
-	the synchronization.
-  - st,iec60958: support S/PDIF IEC6958 protocol for playback
-	IEC60958 protocol is not available for capture.
-	By default, custom protocol is assumed, meaning that protocol is
-	configured according to protocol defined in related DAI link node,
-	such as i2s, left justified, right justified, dsp and pdm protocols.
-	Note: ac97 protocol is not supported by SAI driver
-   - #clock-cells: should be 0. This property must be present if the SAI device
-	is a master clock provider, according to clocks bindings, described in
-	Documentation/devicetree/bindings/clock/clock-bindings.txt.
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-graph.txt.
-
-Example:
-sound_card {
-	compatible = "audio-graph-card";
-	dais = <&sai1b_port>;
-};
-
-sai1: sai1@40015800 {
-	compatible = "st,stm32h7-sai";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 0x40015800 0x400>;
-	reg = <0x40015800 0x4>;
-	clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
-	clock-names = "pclk", "x8k", "x11k";
-	interrupts = <87>;
-
-	sai1a: audio-controller@40015804 {
-		compatible = "st,stm32-sai-sub-a";
-		reg = <0x4 0x1C>;
-		clocks = <&rcc SAI1_CK>;
-		clock-names = "sai_ck";
-		dmas = <&dmamux1 1 87 0x400 0x0>;
-		dma-names = "tx";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sai1a>;
-
-		sai1b_port: port {
-			cpu_endpoint: endpoint {
-				remote-endpoint = <&codec_endpoint>;
-				format = "i2s";
-			};
-		};
-	};
-};
-
-audio-codec {
-	codec_port: port {
-		codec_endpoint: endpoint {
-			remote-endpoint = <&cpu_endpoint>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
new file mode 100644
index 000000000000..56d206f97a96
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Serial Audio Interface (SAI)
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@foss.st.com>
+
+description:
+  The SAI interface (Serial Audio Interface) offers a wide set of audio
+  protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
+  The SAI contains two independent audio sub-blocks. Each sub-block has
+  its own clock generator and I/O lines controller.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-sai
+      - st,stm32h7-sai
+
+  reg:
+    items:
+      - description: Base address and size of SAI common register set.
+      - description: Base address and size of SAI identification register set.
+    minItems: 1
+
+  ranges:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+
+patternProperties:
+  "^audio-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    description:
+      Two subnodes corresponding to SAI sub-block instances A et B
+      can be defined. Subnode can be omitted for unsused sub-block.
+
+    properties:
+      compatible:
+        description: Compatible for SAI sub-block A or B.
+        pattern: "st,stm32-sai-sub-[ab]"
+
+      "#sound-dai-cells":
+        const: 0
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        items:
+          - description: sai_ck clock feeding the internal clock generator.
+          - description: MCLK clock from a SAI set as master clock provider.
+        minItems: 1
+
+      clock-names:
+        items:
+          - const: sai_ck
+          - const: MCLK
+        minItems: 1
+
+      dmas:
+        maxItems: 1
+
+      dma-names:
+        description: |
+          rx: SAI sub-block is configured as a capture DAI.
+          tx: SAI sub-block is configured as a playback DAI.
+        enum: [ rx, tx ]
+
+      st,sync:
+        description:
+          Configure the SAI sub-block as slave of another SAI sub-block.
+          By default SAI sub-block is in asynchronous mode.
+          Must contain the phandle and index of the SAI sub-block providing
+          the synchronization.
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          - items:
+              - description: phandle of the SAI sub-block
+              - description: index of the SAI sub-block
+
+      st,iec60958:
+        description:
+          If set, support S/PDIF IEC6958 protocol for playback.
+          IEC60958 protocol is not available for capture.
+          By default, custom protocol is assumed, meaning that protocol is
+          configured according to protocol defined in related DAI link node,
+          such as i2s, left justified, right justified, dsp and pdm protocols.
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      "#clock-cells":
+        description: Configure the SAI device as master clock provider.
+        const: 0
+
+      port:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+      - "#sound-dai-cells"
+      - reg
+      - clocks
+      - clock-names
+      - dmas
+      - dma-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32f4-sai
+    then:
+      properties:
+        clocks:
+          items:
+            - description: x8k, SAI parent clock for sampling rates multiple of 8kHz.
+            - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz.
+
+        clock-names:
+          items:
+            - const: x8k
+            - const: x11k
+    else:
+      properties:
+        clocks:
+          items:
+            - description: pclk feeds the peripheral bus interface.
+            - description: x8k, SAI parent clock for sampling rates multiple of 8kHz.
+            - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz.
+
+        clock-names:
+          items:
+            - const: pclk
+            - const: x8k
+            - const: x11k
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    sai2: sai@4400b000 {
+      compatible = "st,stm32h7-sai";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0 0x4400b000 0x400>;
+      reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
+      clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+      clock-names = "pclk", "x8k", "x11k";
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
+      pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
+
+      sai2a: audio-controller@4400b004 {
+        #sound-dai-cells = <0>;
+        compatible = "st,stm32-sai-sub-a";
+        reg = <0x4 0x1c>;
+        dmas = <&dmamux1 89 0x400 0x01>;
+        dma-names = "tx";
+        clocks = <&rcc SAI2_K>;
+        clock-names = "sai_ck";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
deleted file mode 100644
index ca9101777c44..000000000000
--- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-STMicroelectronics STM32 S/PDIF receiver (SPDIFRX).
-
-The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
-IEC-60958 and IEC-61937.
-
-Required properties:
-  - compatible: should be "st,stm32h7-spdifrx"
-  - reg: cpu DAI IP base address and size
-  - clocks: must contain an entry for kclk (used as S/PDIF signal reference)
-  - clock-names: must contain "kclk"
-  - interrupts: cpu DAI interrupt line
-  - dmas: DMA specifiers for audio data DMA and iec control flow DMA
-    See STM32 DMA bindings, Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
-  - dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
-
-Optional properties:
-  - resets: Reference to a reset controller asserting the SPDIFRX
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-graph.txt.
-
-Example:
-spdifrx: spdifrx@40004000 {
-	compatible = "st,stm32h7-spdifrx";
-	reg = <0x40004000 0x400>;
-	clocks = <&rcc SPDIFRX_CK>;
-	clock-names = "kclk";
-	interrupts = <97>;
-	dmas = <&dmamux1 2 93 0x400 0x0>,
-	       <&dmamux1 3 94 0x400 0x0>;
-	dma-names = "rx", "rx-ctrl";
-	pinctrl-0 = <&spdifrx_pins>;
-	pinctrl-names = "default";
-
-	spdifrx_port: port {
-		cpu_endpoint: endpoint {
-			remote-endpoint = <&codec_endpoint>;
-		};
-	};
-};
-
-spdif_in: spdif-in {
-	compatible = "linux,spdif-dir";
-
-	codec_port: port {
-		codec_endpoint: endpoint {
-			remote-endpoint = <&cpu_endpoint>;
-		};
-	};
-};
-
-soundcard {
-	compatible = "audio-graph-card";
-	dais = <&spdifrx_port>;
-};
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
new file mode 100644
index 000000000000..837e830c47ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-spdifrx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 S/PDIF receiver (SPDIFRX)
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@foss.st.com>
+
+description: |
+  The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
+  IEC-60958 and IEC-61937.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-spdifrx
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: kclk
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: audio data capture DMA
+      - description: IEC status bits capture DMA
+
+  dma-names:
+    items:
+      - const: rx
+      - const: rx-ctrl
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    spdifrx: spdifrx@40004000 {
+        compatible = "st,stm32h7-spdifrx";
+        #sound-dai-cells = <0>;
+        reg = <0x40004000 0x400>;
+        clocks = <&rcc SPDIF_K>;
+        clock-names = "kclk";
+        interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 2 93 0x400 0x0>,
+               <&dmamux1 3 94 0x400 0x0>;
+        dma-names = "rx", "rx-ctrl";
+        pinctrl-0 = <&spdifrx_pins>;
+        pinctrl-names = "default";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/tas2552.txt b/Documentation/devicetree/bindings/sound/tas2552.txt
index 2d71eb05c1d3..a7eecad83db1 100644
--- a/Documentation/devicetree/bindings/sound/tas2552.txt
+++ b/Documentation/devicetree/bindings/sound/tas2552.txt
@@ -33,4 +33,4 @@ tas2552: tas2552@41 {
 };
 
 For more product information please see the link below:
-http://www.ti.com/product/TAS2552
+https://www.ti.com/product/TAS2552
diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt
deleted file mode 100644
index 658e1fb18a99..000000000000
--- a/Documentation/devicetree/bindings/sound/tas2562.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Texas Instruments TAS2562 Smart PA
-
-The TAS2562 is a mono, digital input Class-D audio amplifier optimized for
-efficiently driving high peak power into small loudspeakers.
-Integrated speaker voltage and current sense provides for
-real time monitoring of loudspeaker behavior.
-
-Required properties:
- - #address-cells  - Should be <1>.
- - #size-cells     - Should be <0>.
- - compatible:	   - Should contain "ti,tas2562".
- - reg:		   - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.
- - ti,imon-slot-no:- TDM TX current sense time slot.
-
-Optional properties:
-- interrupt-parent: phandle to the interrupt controller which provides
-                    the interrupt.
-- interrupts: (GPIO) interrupt to which the chip is connected.
-- shut-down: GPIO used to control the state of the device.
-
-Examples:
-tas2562@4c {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        compatible = "ti,tas2562";
-        reg = <0x4c>;
-
-        interrupt-parent = <&gpio1>;
-        interrupts = <14>;
-
-	shut-down = <&gpio1 15 0>;
-        ti,imon-slot-no = <0>;
-};
-
diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml
new file mode 100644
index 000000000000..30f6b029ac08
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/tas2562.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments TAS2562 Smart PA
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The TAS2562 is a mono, digital input Class-D audio amplifier optimized for
+  efficiently driving high peak power into small loudspeakers.
+  Integrated speaker voltage and current sense provides for
+  real time monitoring of loudspeaker behavior.
+
+  Specifications about the audio amplifier can be found at:
+    https://www.ti.com/lit/gpn/tas2562
+    https://www.ti.com/lit/gpn/tas2563
+    https://www.ti.com/lit/gpn/tas2564
+    https://www.ti.com/lit/gpn/tas2110
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2562
+      - ti,tas2563
+      - ti,tas2564
+      - ti,tas2110
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+
+  shut-down-gpios:
+    maxItems: 1
+    description: GPIO used to control the state of the device.
+    deprecated: true
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO used to control the state of the device.
+
+  interrupts:
+    maxItems: 1
+
+  ti,imon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX current sense time slot.
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   i2c0 {
+     #address-cells = <1>;
+     #size-cells = <0>;
+     codec: codec@4c {
+       compatible = "ti,tas2562";
+       reg = <0x4c>;
+       #sound-dai-cells = <1>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <14>;
+       shutdown-gpios = <&gpio1 15 0>;
+       ti,imon-slot-no = <0>;
+     };
+   };
diff --git a/Documentation/devicetree/bindings/sound/tas2770.txt b/Documentation/devicetree/bindings/sound/tas2770.txt
deleted file mode 100644
index ede6bb3d9637..000000000000
--- a/Documentation/devicetree/bindings/sound/tas2770.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Texas Instruments TAS2770 Smart PA
-
-The TAS2770 is a mono, digital input Class-D audio amplifier optimized for
-efficiently driving high peak power into small loudspeakers.
-Integrated speaker voltage and current sense provides for
-real time monitoring of loudspeaker behavior.
-
-Required properties:
-
- - compatible:	   - Should contain "ti,tas2770".
- - reg:		       - The i2c address. Should contain <0x4c>, <0x4d>,<0x4e>, or <0x4f>.
- - #address-cells  - Should be <1>.
- - #size-cells     - Should be <0>.
- - ti,asi-format:  - Sets TDM RX capture edge. 0->Rising; 1->Falling.
- - ti,imon-slot-no:- TDM TX current sense time slot.
- - ti,vmon-slot-no:- TDM TX voltage sense time slot.
-
-Optional properties:
-
-- interrupt-parent: the phandle to the interrupt controller which provides
-                     the interrupt.
-- interrupts: interrupt specification for data-ready.
-
-Examples:
-
-    tas2770@4c {
-                compatible = "ti,tas2770";
-                reg = <0x4c>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-                interrupt-parent = <&msm_gpio>;
-                interrupts = <97 0>;
-                ti,asi-format = <0>;
-                ti,imon-slot-no = <0>;
-                ti,vmon-slot-no = <2>;
-        };
-
diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
new file mode 100644
index 000000000000..bc90e72bf7cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019-20 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/tas2770.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments TAS2770 Smart PA
+
+maintainers:
+  - Shi Fu <shifu0704@thundersoft.com>
+
+description: |
+  The TAS2770 is a mono, digital input Class-D audio amplifier optimized for
+  efficiently driving high peak power into small loudspeakers.
+  Integrated speaker voltage and current sense provides for
+  real time monitoring of loudspeaker behavior.
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2770
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C address of the device can be between 0x41 to 0x48.
+
+  reset-gpio:
+    maxItems: 1
+    description: GPIO used to reset the device.
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO used to control the state of the device.
+
+  interrupts:
+    maxItems: 1
+
+  ti,imon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX current sense time slot.
+
+  ti,vmon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX voltage sense time slot.
+
+  ti,asi-format:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sets TDM RX capture edge.
+    enum:
+      - 0 # Rising edge
+      - 1 # Falling edge
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   i2c0 {
+     #address-cells = <1>;
+     #size-cells = <0>;
+     codec: codec@41 {
+       compatible = "ti,tas2770";
+       reg = <0x41>;
+       #sound-dai-cells = <1>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <14>;
+       reset-gpio = <&gpio1 15 0>;
+       shutdown-gpios = <&gpio1 14 0>;
+       ti,imon-slot-no = <0>;
+       ti,vmon-slot-no = <2>;
+     };
+   };
diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml
new file mode 100644
index 000000000000..66a0df8850ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020-2022 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/tas27xx.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments TAS2764/TAS2780 Smart PA
+
+maintainers:
+  - Shenghao Ding <shenghao-ding@ti.com>
+
+description: |
+  The TAS2764/TAS2780 is a mono, digital input Class-D audio amplifier
+  optimized for efficiently driving high peak power into small
+  loudspeakers. Integrated speaker voltage and current sense provides
+  for real time monitoring of loudspeaker behavior.
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2764
+      - ti,tas2780
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C address of the device can be between 0x38 to 0x45.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO used to reset the device.
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO used to control the state of the device.
+
+  interrupts:
+    maxItems: 1
+
+  ti,imon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX current sense time slot.
+
+  ti,vmon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX voltage sense time slot.
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   i2c0 {
+     #address-cells = <1>;
+     #size-cells = <0>;
+     codec: codec@38 {
+       compatible = "ti,tas2764";
+       reg = <0x38>;
+       #sound-dai-cells = <1>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <14>;
+       reset-gpios = <&gpio1 15 0>;
+       shutdown-gpios = <&gpio1 15 0>;
+       ti,imon-slot-no = <0>;
+       ti,vmon-slot-no = <2>;
+     };
+   };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/tas5720.txt b/Documentation/devicetree/bindings/sound/tas5720.txt
index 7481653fe8e3..df99ca9451b0 100644
--- a/Documentation/devicetree/bindings/sound/tas5720.txt
+++ b/Documentation/devicetree/bindings/sound/tas5720.txt
@@ -4,9 +4,9 @@ The TAS5720 serial control bus communicates through the I2C protocol only. The
 serial bus is also used for periodic codec fault checking/reporting during
 audio playback. For more product information please see the links below:
 
-http://www.ti.com/product/TAS5720L
-http://www.ti.com/product/TAS5720M
-http://www.ti.com/product/TAS5722L
+https://www.ti.com/product/TAS5720L
+https://www.ti.com/product/TAS5720M
+https://www.ti.com/product/TAS5722L
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/sound/tas5805m.yaml b/Documentation/devicetree/bindings/sound/tas5805m.yaml
new file mode 100644
index 000000000000..3aade02d8a96
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas5805m.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tas5805m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TAS5805M audio amplifier
+
+maintainers:
+  - Daniel Beer <daniel.beer@igorinstitute.com>
+
+description: |
+  The TAS5805M is a class D audio amplifier with a built-in DSP.
+
+properties:
+  compatible:
+    enum:
+      - ti,tas5805m
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C address of the amplifier. See the datasheet for possible values.
+
+  pvdd-supply:
+    description: |
+      Regulator for audio power supply (PVDD in the datasheet).
+
+  pdn-gpios:
+    description: |
+      Power-down control GPIO (PDN pin in the datasheet).
+
+  ti,dsp-config-name:
+    description: |
+      The name of the DSP configuration that should be loaded for this
+      instance. Configuration blobs are sequences of register writes
+      generated from TI's PPC3 tool.
+    $ref: /schemas/types.yaml#/definitions/string
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        tas5805m: tas5805m@2c {
+                reg = <0x2c>;
+                compatible = "ti,tas5805m";
+
+                pvdd-supply = <&audiopwr>;
+                pdn-gpios = <&tlmm 160 0>;
+
+                ti,dsp-config-name = "mono_pbtl_48khz";
+        };
+    };
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/tdm-slot.txt b/Documentation/devicetree/bindings/sound/tdm-slot.txt
index 34cf70e2cbc4..4bb513ae62fc 100644
--- a/Documentation/devicetree/bindings/sound/tdm-slot.txt
+++ b/Documentation/devicetree/bindings/sound/tdm-slot.txt
@@ -14,8 +14,8 @@ For instance:
 	dai-tdm-slot-tx-mask = <0 1>;
 	dai-tdm-slot-rx-mask = <1 0>;
 
-And for each spcified driver, there could be one .of_xlate_tdm_slot_mask()
-to specify a explicit mapping of the channels and the slots. If it's absent
+And for each specified driver, there could be one .of_xlate_tdm_slot_mask()
+to specify an explicit mapping of the channels and the slots. If it's absent
 the default snd_soc_of_xlate_tdm_slot_mask() will be used to generating the
 tx and rx masks.
 
diff --git a/Documentation/devicetree/bindings/sound/test-component.yaml b/Documentation/devicetree/bindings/sound/test-component.yaml
new file mode 100644
index 000000000000..9c40a2122dfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/test-component.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/test-component.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Test Component
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - test-cpu
+      - test-cpu-verbose
+      - test-cpu-verbose-dai
+      - test-cpu-verbose-component
+      - test-codec
+      - test-codec-verbose
+      - test-codec-verbose-dai
+      - test-codec-verbose-component
+
+required:
+  - compatible
+
+additionalProperties: true
+
+examples:
+  - |
+    test_cpu {
+        compatible = "test-cpu";
+    };
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
new file mode 100644
index 000000000000..20ea5883b7ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+# Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,j721e-cpb-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments J721e Common Processor Board Audio Support
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description: |
+  The audio support on the board is using pcm3168a codec connected to McASP10
+  serializers in parallel setup.
+  The pcm3168a SCKI clock is sourced from j721e AUDIO_REFCLK2 pin.
+  In order to support 48KHz and 44.1KHz family of sampling rates the parent
+  clock for AUDIO_REFCLK2 needs to be changed between PLL4 (for 48KHz) and
+  PLL15 (for 44.1KHz). The same PLLs are used for McASP10's AUXCLK clock via
+  different HSDIVIDER.
+
+  Clocking setup for j721e:
+    48KHz family:
+    PLL4 ---> PLL4_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
+          |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+
+    44.1KHz family:
+    PLL15 ---> PLL15_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
+           |-> PLL15_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+
+  Clocking setup for j7200:
+    48KHz family:
+    PLL4 ---> PLL4_HSDIV0 ---> MCASP0_AUXCLK ---> McASP0.auxclk
+          |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-cpb-audio
+      - ti,j7200-cpb-audio
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  ti,cpb-mcasp:
+    description: phandle to McASP used on CPB
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,cpb-codec:
+    description: phandle to the pcm3168a codec used on the CPB
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  clocks:
+    minItems: 4
+    maxItems: 6
+
+  clock-names:
+    minItems: 4
+    maxItems: 6
+
+required:
+  - compatible
+  - model
+  - ti,cpb-mcasp
+  - ti,cpb-codec
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-cpb-audio
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AUXCLK clock for McASP used by CPB audio
+            - description: Parent for CPB_McASP auxclk (for 48KHz)
+            - description: Parent for CPB_McASP auxclk (for 44.1KHz)
+            - description: SCKI clock for the pcm3168a codec on CPB
+            - description: Parent for CPB_SCKI clock (for 48KHz)
+            - description: Parent for CPB_SCKI clock (for 44.1KHz)
+
+        clock-names:
+          items:
+            - const: cpb-mcasp-auxclk
+            - const: cpb-mcasp-auxclk-48000
+            - const: cpb-mcasp-auxclk-44100
+            - const: cpb-codec-scki
+            - const: cpb-codec-scki-48000
+            - const: cpb-codec-scki-44100
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j7200-cpb-audio
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AUXCLK clock for McASP used by CPB audio
+            - description: Parent for CPB_McASP auxclk (for 48KHz)
+            - description: SCKI clock for the pcm3168a codec on CPB
+            - description: Parent for CPB_SCKI clock (for 48KHz)
+
+        clock-names:
+          items:
+            - const: cpb-mcasp-auxclk
+            - const: cpb-mcasp-auxclk-48000
+            - const: cpb-codec-scki
+            - const: cpb-codec-scki-48000
+
+examples:
+  - |+
+    sound {
+        compatible = "ti,j721e-cpb-audio";
+        model = "j721e-cpb";
+
+        ti,cpb-mcasp = <&mcasp10>;
+        ti,cpb-codec = <&pcm3168a_1>;
+
+        clocks = <&k3_clks 184 1>,
+                 <&k3_clks 184 2>, <&k3_clks 184 4>,
+                 <&k3_clks 157 371>,
+                 <&k3_clks 157 400>, <&k3_clks 157 401>;
+        clock-names = "cpb-mcasp-auxclk",
+                      "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100",
+                      "cpb-codec-scki",
+                      "cpb-codec-scki-48000", "cpb-codec-scki-44100";
+    };
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
new file mode 100644
index 000000000000..859d369c71e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+# Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,j721e-cpb-ivi-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments J721e Common Processor Board Audio Support
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description: |
+  The Infotainment board plugs into the Common Processor Board, the support of the
+  extension board is extending the CPB audio support, decribed in:
+  sound/ti,j721e-cpb-audio.txt
+
+  The audio support on the Infotainment Expansion Board consists of McASP0
+  connected to two pcm3168a codecs with dedicated set of serializers to each.
+  The SCKI for pcm3168a is sourced from j721e AUDIO_REFCLK0 pin.
+
+  In order to support 48KHz and 44.1KHz family of sampling rates the parent clock
+  for AUDIO_REFCLK0 needs to be changed between PLL4 (for 48KHz) and PLL15 (for
+  44.1KHz). The same PLLs are used for McASP0's AUXCLK clock via different
+  HSDIVIDER.
+
+  Note: the same PLL4 and PLL15 is used by the audio support on the CPB!
+
+  Clocking setup for 48KHz family:
+  PLL4 ---> PLL4_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
+        |                |-> MCASP0_AUXCLK  ---> McASP0.auxclk
+        |
+        |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+                         |-> AUDIO_REFCLK0  ---> pcm3168a_a/b.SCKI
+
+  Clocking setup for 44.1KHz family:
+  PLL15 ---> PLL15_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
+        |                  |-> MCASP0_AUXCLK  ---> McASP0.auxclk
+        |
+        |-> PLL15_HSDIV2 ---> AUDIO_REFCLK2   ---> pcm3168a.SCKI
+                          |-> AUDIO_REFCLK0   ---> pcm3168a_a/b.SCKI
+
+properties:
+  compatible:
+    items:
+      - const: ti,j721e-cpb-ivi-audio
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  ti,cpb-mcasp:
+    description: phandle to McASP used on CPB
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,cpb-codec:
+    description: phandle to the pcm3168a codec used on the CPB
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,ivi-mcasp:
+    description: phandle to McASP used on IVI
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,ivi-codec-a:
+    description: phandle to the pcm3168a-A codec on the expansion board
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,ivi-codec-b:
+    description: phandle to the pcm3168a-B codec on the expansion board
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  clocks:
+    items:
+      - description: AUXCLK clock for McASP used by CPB audio
+      - description: Parent for CPB_McASP auxclk (for 48KHz)
+      - description: Parent for CPB_McASP auxclk (for 44.1KHz)
+      - description: SCKI clock for the pcm3168a codec on CPB
+      - description: Parent for CPB_SCKI clock (for 48KHz)
+      - description: Parent for CPB_SCKI clock (for 44.1KHz)
+      - description: AUXCLK clock for McASP used by IVI audio
+      - description: Parent for IVI_McASP auxclk (for 48KHz)
+      - description: Parent for IVI_McASP auxclk (for 44.1KHz)
+      - description: SCKI clock for the pcm3168a codec on IVI
+      - description: Parent for IVI_SCKI clock (for 48KHz)
+      - description: Parent for IVI_SCKI clock (for 44.1KHz)
+
+  clock-names:
+    items:
+      - const: cpb-mcasp-auxclk
+      - const: cpb-mcasp-auxclk-48000
+      - const: cpb-mcasp-auxclk-44100
+      - const: cpb-codec-scki
+      - const: cpb-codec-scki-48000
+      - const: cpb-codec-scki-44100
+      - const: ivi-mcasp-auxclk
+      - const: ivi-mcasp-auxclk-48000
+      - const: ivi-mcasp-auxclk-44100
+      - const: ivi-codec-scki
+      - const: ivi-codec-scki-48000
+      - const: ivi-codec-scki-44100
+
+required:
+  - compatible
+  - model
+  - ti,cpb-mcasp
+  - ti,cpb-codec
+  - ti,ivi-mcasp
+  - ti,ivi-codec-a
+  - ti,ivi-codec-b
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |+
+    sound {
+        compatible = "ti,j721e-cpb-ivi-audio";
+        model = "j721e-cpb-ivi";
+
+        ti,cpb-mcasp = <&mcasp10>;
+        ti,cpb-codec = <&pcm3168a_1>;
+
+        ti,ivi-mcasp = <&mcasp0>;
+        ti,ivi-codec-a = <&pcm3168a_a>;
+        ti,ivi-codec-b = <&pcm3168a_b>;
+
+        clocks = <&k3_clks 184 1>,
+                 <&k3_clks 184 2>, <&k3_clks 184 4>,
+                 <&k3_clks 157 371>,
+                 <&k3_clks 157 400>, <&k3_clks 157 401>,
+                 <&k3_clks 174 1>,
+                 <&k3_clks 174 2>, <&k3_clks 174 4>,
+                 <&k3_clks 157 301>,
+                 <&k3_clks 157 330>, <&k3_clks 157 331>;
+        clock-names = "cpb-mcasp-auxclk",
+                      "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100",
+                      "cpb-codec-scki",
+                      "cpb-codec-scki-48000", "cpb-codec-scki-44100",
+                      "ivi-mcasp-auxclk",
+                      "ivi-mcasp-auxclk-48000", "ivi-mcasp-auxclk-44100",
+                      "ivi-codec-scki",
+                      "ivi-codec-scki-48000", "ivi-codec-scki-44100";
+    };
diff --git a/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml b/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml
new file mode 100644
index 000000000000..9681b72b4918
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,src4xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments SRC4392 Device Tree Bindings
+
+description: |
+  The SRC4392 is a digital audio codec that can be connected via
+  I2C or SPI. Currently, only I2C bus is supported.
+
+maintainers:
+  - Matt Flax <flatmax@flatmax.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  compatible:
+    const: ti,src4392
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        audio-codec@70 {
+            #sound-dai-cells = <0>;
+            compatible = "ti,src4392";
+            reg = <0x70>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/ti,tas6424.txt b/Documentation/devicetree/bindings/sound/ti,tas6424.txt
index eacb54f34188..00940c489299 100644
--- a/Documentation/devicetree/bindings/sound/ti,tas6424.txt
+++ b/Documentation/devicetree/bindings/sound/ti,tas6424.txt
@@ -19,4 +19,4 @@ tas6424: tas6424@6a {
 };
 
 For more product information please see the link below:
-http://www.ti.com/product/TAS6424-Q1
+https://www.ti.com/product/TAS6424-Q1
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
new file mode 100644
index 000000000000..83936f594d1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tlv320adc3xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320ADC3001/TLV320ADC3101 Stereo ADC
+
+maintainers:
+  - Ricard Wanderlof <ricardw@axis.com>
+
+description: |
+  Texas Instruments TLV320ADC3001 and TLV320ADC3101 Stereo ADC
+  https://www.ti.com/product/TLV320ADC3001
+  https://www.ti.com/product/TLV320ADC3101
+
+properties:
+  compatible:
+    enum:
+      - ti,tlv320adc3001
+      - ti,tlv320adc3101
+
+  reg:
+    maxItems: 1
+    description: I2C address
+
+  '#sound-dai-cells':
+    const: 0
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO pin used for codec reset (RESET pin)
+
+  clocks:
+    maxItems: 1
+    description: Master clock (MCLK)
+
+  ti,dmdin-gpio1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_GPIO_DISABLED       - I/O buffers powered down and not used
+      - 1 # ADC3XXX_GPIO_INPUT          - Various non-GPIO input functions
+      - 2 # ADC3XXX_GPIO_GPI            - General purpose input
+      - 3 # ADC3XXX_GPIO_GPO            - General purpose output
+      - 4 # ADC3XXX_GPIO_CLKOUT         - Clock source set in CLKOUT_MUX reg
+      - 5 # ADC3XXX_GPIO_INT1           - INT1 output
+      - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK
+      - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK
+    default: 0
+    description: |
+      Configuration for DMDIN/GPIO1 pin.
+
+      When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
+      ALSA control "GPIOx Output" to appear, as a switch control.
+
+  ti,dmclk-gpio2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_GPIO_DISABLED       - I/O buffers powered down and not used
+      - 1 # ADC3XXX_GPIO_INPUT          - Various non-GPIO input functions
+      - 2 # ADC3XXX_GPIO_GPI            - General purpose input
+      - 3 # ADC3XXX_GPIO_GPO            - General purpose output
+      - 4 # ADC3XXX_GPIO_CLKOUT         - Clock source set in CLKOUT_MUX reg
+      - 5 # ADC3XXX_GPIO_INT1           - INT1 output
+      - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK
+      - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK
+    default: 0
+    description: |
+      Configuration for DMCLK/GPIO2 pin.
+
+      When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
+      ALSA control "GPIOx Output" to appear, as a switch control.
+
+      Note that there is currently no support for reading the GPIO pins as
+      inputs.
+
+  ti,micbias1-vg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_MICBIAS_OFF		- Mic bias is powered down
+      - 1 # ADC3XXX_MICBIAS_2_0V	- Mic bias is set to 2.0V
+      - 2 # ADC3XXX_MICBIAS_2_5V	- Mic bias is set to 2.5V
+      - 3 # ADC3XXX_MICBIAS_AVDD	- Mic bias is same as AVDD supply
+    default: 0
+    description: |
+      Mic bias voltage output on MICBIAS1 pin
+
+  ti,micbias2-vg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_MICBIAS_OFF		- Mic bias is powered down
+      - 1 # ADC3XXX_MICBIAS_2_0V	- Mic bias is set to 2.0V
+      - 2 # ADC3XXX_MICBIAS_2_5V	- Mic bias is set to 2.5V
+      - 3 # ADC3XXX_MICBIAS_AVDD	- Mic bias is same as AVDD supply
+    default: 0
+    description: |
+      Mic bias voltage output on MICBIAS2 pin
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/sound/tlv320adc3xxx.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        tlv320adc3101: audio-codec@18 {
+            compatible = "ti,tlv320adc3101";
+            reg = <0x18>;
+            reset-gpios = <&gpio_pc 3 GPIO_ACTIVE_LOW>;
+            clocks = <&audio_mclk>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            ti,dmdin-gpio1 = <ADC3XXX_GPIO_GPO>;
+            ti,micbias1-vg = <ADC3XXX_MICBIAS_AVDD>;
+        };
+    };
+
+    audio_mclk: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <24576000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/ti,ts3a227e.yaml b/Documentation/devicetree/bindings/sound/ti,ts3a227e.yaml
new file mode 100644
index 000000000000..785930658029
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,ts3a227e.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,ts3a227e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TS3A227E
+  Autonomous Audio Accessory Detection and Configuration Switch
+
+maintainers:
+  - Dylan Reid <dgreid@chromium.org>
+
+description: |
+  The TS3A227E detect headsets of 3-ring and 4-ring standards and
+  switches automatically to route the microphone correctly. It also
+  handles key press detection in accordance with the Android audio
+  headset specification v1.0.
+
+properties:
+  compatible:
+    enum:
+      - ti,ts3a227e
+
+  reg:
+    const: 0x3b
+
+  interrupts:
+    maxItems: 1
+
+  ti,micbias:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Intended MICBIAS voltage (datasheet section 9.6.7).
+    enum:
+      - 0 # 2.1 V
+      - 1 # 2.2 V
+      - 2 # 2.3 V
+      - 3 # 2.4 V
+      - 4 # 2.5 V
+      - 5 # 2.6 V
+      - 6 # 2.7 V
+      - 7 # 2.8 V
+    default: 1
+
+  ti,debounce-release-ms:
+    description: key release debounce time in ms (datasheet section 9.6.7).
+    enum:
+      - 0
+      - 20
+    default: 20
+
+  ti,debounce-press-ms:
+    description: key press debounce time in ms (datasheet section 9.6.7).
+    enum:
+      - 2
+      - 40
+      - 80
+      - 120
+    default: 80
+
+  ti,debounce-insertion-ms:
+    description: headset insertion debounce time in ms (datasheet section 9.6.5).
+    enum:
+      - 2
+      - 30
+      - 60
+      - 90
+      - 120
+      - 150
+      - 1000
+      - 2000
+    default: 90
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec: audio-controller@3b {
+            compatible = "ti,ts3a227e";
+            reg = <0x3b>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
new file mode 100644
index 000000000000..ee698614862e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital
+  PDM microphones recording), high-performance audio, analog-to-digital
+  converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140
+  family supports line and  microphone Inputs, and offers a programmable
+  microphone bias or supply voltage generation.
+
+  Specifications can be found at:
+    https://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf
+    https://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf
+    https://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tlv320adc3140
+      - ti,tlv320adc5140
+      - ti,tlv320adc6140
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+
+  reset-gpios:
+    maxItems: 1
+    description: |
+      GPIO used for hardware reset.
+
+  areg-supply:
+    description: |
+      Regulator with AVDD at 3.3V.  If not defined then the internal regulator
+      is enabled.
+
+  ti,mic-bias-source:
+    description: |
+      Indicates the source for MIC Bias.
+      0 - Mic bias is set to VREF
+      1 - Mic bias is set to VREF × 1.096
+      6 - Mic bias is set to AVDD
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 6]
+
+  ti,vref-source:
+    description: |
+      Indicates the source for MIC Bias.
+      0 - Set VREF to 2.75V
+      1 - Set VREF to 2.5V
+      2 - Set VREF to 1.375V
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  ti,pdm-edge-select:
+    description: |
+       Defines the PDMCLK sampling edge configuration for the PDM inputs.  This
+       array is defined as <PDMIN1 PDMIN2 PDMIN3 PDMIN4>.
+
+       0 - (default) Odd channel is latched on the negative edge and even
+       channel is latched on the positive edge.
+       1 - Odd channel is latched on the positive edge and even channel is
+       latched on the negative edge.
+
+       PDMIN1 - PDMCLK latching edge used for channel 1 and 2 data
+       PDMIN2 - PDMCLK latching edge used for channel 3 and 4 data
+       PDMIN3 - PDMCLK latching edge used for channel 5 and 6 data
+       PDMIN4 - PDMCLK latching edge used for channel 7 and 8 data
+
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      maximum: 1
+    default: [0, 0, 0, 0]
+
+  ti,gpi-config:
+    description: |
+       Defines the configuration for the general purpose input pins (GPI).
+       The array is defined as <GPI1 GPI2 GPI3 GPI4>.
+
+       0 - (default) disabled
+       1 - GPIX is configured as a general-purpose input (GPI)
+       2 - GPIX is configured as a master clock input (MCLK)
+       3 - GPIX is configured as an ASI input for daisy-chain (SDIN)
+       4 - GPIX is configured as a PDM data input for channel 1 and channel
+            (PDMDIN1)
+       5 - GPIX is configured as a PDM data input for channel 3 and channel
+            (PDMDIN2)
+       6 - GPIX is configured as a PDM data input for channel 5 and channel
+            (PDMDIN3)
+       7 - GPIX is configured as a PDM data input for channel 7 and channel
+            (PDMDIN4)
+
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      maximum: 7
+    default: [0, 0, 0, 0]
+
+  ti,asi-tx-drive:
+    type: boolean
+    description: |
+      When set the device will set the Tx ASI output to a Hi-Z state for unused
+      data cycles. Default is to drive the output low on unused ASI cycles.
+
+patternProperties:
+  '^ti,gpo-config-[1-4]$':
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+       Defines the configuration and output driver for the general purpose
+       output pins (GPO).  These values are pairs, the first value is for the
+       configuration type and the second value is for the output drive type.
+       The array is defined as <GPO_CFG GPO_DRV>
+
+       GPO output configuration can be one of the following:
+
+       0 - (default) disabled
+       1 - GPOX is configured as a general-purpose output (GPO)
+       2 - GPOX is configured as a device interrupt output (IRQ)
+       3 - GPOX is configured as a secondary ASI output (SDOUT2)
+       4 - GPOX is configured as a PDM clock output (PDMCLK)
+
+       GPO output drive configuration for the GPO pins can be one of the following:
+
+       0d - (default) Hi-Z output
+       1d - Drive active low and active high
+       2d - Drive active low and weak high
+       3d - Drive active low and Hi-Z
+       4d - Drive weak low and active high
+       5d - Drive Hi-Z and active high
+
+  ti,gpio-config:
+    description: |
+       Defines the configuration and output drive for the General Purpose
+       Input and Output pin (GPIO1). Its value is a pair, the first value is for
+       the configuration type and the second value is for the output drive
+       type. The array is defined as <GPIO1_CFG GPIO1_DRV>
+
+       configuration for the GPIO pin can be one of the following:
+       0 - disabled
+       1 - GPIO1 is configured as a general-purpose output (GPO)
+       2 - (default) GPIO1 is configured as a device interrupt output (IRQ)
+       3 - GPIO1 is configured as a secondary ASI output (SDOUT2)
+       4 - GPIO1 is configured as a PDM clock output (PDMCLK)
+       8 - GPIO1 is configured as an input to control when MICBIAS turns on or
+           off (MICBIAS_EN)
+       9 - GPIO1 is configured as a general-purpose input (GPI)
+       10 - GPIO1 is configured as a master clock input (MCLK)
+       11 - GPIO1 is configured as an ASI input for daisy-chain (SDIN)
+       12 - GPIO1 is configured as a PDM data input for channel 1 and channel 2
+            (PDMDIN1)
+       13 - GPIO1 is configured as a PDM data input for channel 3 and channel 4
+            (PDMDIN2)
+       14 - GPIO1 is configured as a PDM data input for channel 5 and channel 6
+            (PDMDIN3)
+       15 - GPIO1 is configured as a PDM data input for channel 7 and channel 8
+            (PDMDIN4)
+
+       output drive type for the GPIO pin can be one of the following:
+       0 - Hi-Z output
+       1 - Drive active low and active high
+       2 - (default) Drive active low and weak high
+       3 - Drive active low and Hi-Z
+       4 - Drive weak low and active high
+       5 - Drive Hi-Z and active high
+
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      maximum: 15
+    default: [2, 2]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      codec: codec@4c {
+        compatible = "ti,tlv320adc5140";
+        reg = <0x4c>;
+        ti,mic-bias-source = <6>;
+        ti,pdm-edge-select = <0 1 0 1>;
+        ti,gpi-config = <4 5 6 7>;
+        ti,gpio-config = <10 2>;
+        ti,gpo-config-1 = <0 0>;
+        ti,gpo-config-2 = <0 0>;
+        reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
index e372303697dc..bbad98d5b986 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
@@ -58,7 +58,7 @@ The pins can be used in referring sound node's audio-routing property.
 
 Example:
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
+#include <dt-bindings/sound/tlv320aic31xx.h>
 
 tlv320aic31xx: tlv320aic31xx@18 {
 	compatible = "ti,tlv320aic311x";
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
index ca75890f0d07..f59125bc79d1 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
@@ -6,6 +6,7 @@ Required properties:
  - compatible - "string" - One of:
 	"ti,tlv320aic32x4" TLV320AIC3204
 	"ti,tlv320aic32x6" TLV320AIC3206, TLV320AIC3256
+	"ti,tas2505" TAS2505, TAS2521
  - reg: I2C slave address
  - supply-*: Required supply regulators are:
     "iov" - digital IO power supply
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
index 9796c4639262..20931a63fd64 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
@@ -1,6 +1,6 @@
 Texas Instruments - tlv320aic3x Codec module
 
-The tlv320aic3x serial control bus communicates through I2C protocols
+The tlv320aic3x serial control bus communicates through both I2C and SPI bus protocols
 
 Required properties:
 
@@ -63,7 +63,7 @@ CODEC input pins for other compatible codecs:
 
 The pins can be used in referring sound node's audio-routing property.
 
-Example:
+I2C example:
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -78,3 +78,20 @@ tlv320aic3x: tlv320aic3x@1b {
 	DRVDD-supply = <&regulator>;
 	DVDD-supply = <&regulator>;
 };
+
+SPI example:
+
+spi0: spi@f0000000 {
+	tlv320aic3x: codec@0 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0>; /* CS number */
+		#sound-dai-cells = <0>;
+		spi-max-frequency = <1000000>;
+
+		AVDD-supply = <&regulator>;
+		IOVDD-supply = <&regulator>;
+		DRVDD-supply = <&regulator>;
+		DVDD-supply = <&regulator>;
+		ai3x-ocmv = <0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/ts3a227e.txt b/Documentation/devicetree/bindings/sound/ts3a227e.txt
deleted file mode 100644
index 21ab45bc7e8f..000000000000
--- a/Documentation/devicetree/bindings/sound/ts3a227e.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Texas Instruments TS3A227E
-Autonomous Audio Accessory Detection and Configuration Switch
-
-The TS3A227E detect headsets of 3-ring and 4-ring standards and
-switches automatically to route the microphone correctly.  It also
-handles key press detection in accordance with the Android audio
-headset specification v1.0.
-
-Required properties:
-
- - compatible:		Should contain "ti,ts3a227e".
- - reg:			The i2c address. Should contain <0x3b>.
- - interrupts:		Interrupt number for /INT pin from the 227e
-
-Optional properies:
- - ti,micbias:   Intended MICBIAS voltage (datasheet section 9.6.7).
-      Select 0/1/2/3/4/5/6/7 to specify MICBIAS voltage
-      2.1V/2.2V/2.3V/2.4V/2.5V/2.6V/2.7V/2.8V
-      Default value is "1" (2.2V).
-
-Examples:
-
-	i2c {
-		ts3a227e@3b {
-			compatible = "ti,ts3a227e";
-			reg = <0x3b>;
-			interrupt-parent = <&gpio>;
-			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/uniphier,aio.txt b/Documentation/devicetree/bindings/sound/uniphier,aio.txt
deleted file mode 100644
index 4ce68ed6f2f2..000000000000
--- a/Documentation/devicetree/bindings/sound/uniphier,aio.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Socionext UniPhier SoC audio driver
-
-The Socionext UniPhier audio subsystem consists of I2S and S/PDIF blocks in
-the same register space.
-
-Required properties:
-- compatible      : should be one of the following:
-		    "socionext,uniphier-ld11-aio"
-		    "socionext,uniphier-ld20-aio"
-		    "socionext,uniphier-pxs2-aio"
-- reg             : offset and length of the register set for the device.
-- interrupts      : should contain I2S or S/PDIF interrupt.
-- pinctrl-names   : should be "default".
-- pinctrl-0       : defined I2S signal pins for an external codec chip.
-- clock-names     : should include following entries:
-                    "aio"
-- clocks          : a list of phandle, should contain an entry for each
-                    entry in clock-names.
-- reset-names     : should include following entries:
-                    "aio"
-- resets          : a list of phandle, should contain an entry for each
-                    entry in reset-names.
-- #sound-dai-cells: should be 1.
-
-Optional properties:
-- socionext,syscon: a phandle, should contain soc-glue.
-                    The soc-glue is used for changing mode of S/PDIF signal pin
-                    to Output from Hi-Z. This property is optional if you use
-                    I2S signal pins only.
-
-Example:
-	audio {
-		compatible = "socionext,uniphier-ld20-aio";
-		reg = <0x56000000 0x80000>;
-		interrupts = <0 144 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_aout>;
-		clock-names = "aio";
-		clocks = <&sys_clk 40>;
-		reset-names = "aio";
-		resets = <&sys_rst 40>;
-		#sound-dai-cells = <1>;
-
-		socionext,syscon = <&sg>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/uniphier,evea.txt b/Documentation/devicetree/bindings/sound/uniphier,evea.txt
deleted file mode 100644
index 3f31b235f18b..000000000000
--- a/Documentation/devicetree/bindings/sound/uniphier,evea.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Socionext EVEA - UniPhier SoC internal codec driver
-
-Required properties:
-- compatible      : should be "socionext,uniphier-evea".
-- reg             : offset and length of the register set for the device.
-- clock-names     : should include following entries:
-                    "evea", "exiv"
-- clocks          : a list of phandle, should contain an entry for each
-                    entries in clock-names.
-- reset-names     : should include following entries:
-                    "evea", "exiv", "adamv"
-- resets          : a list of phandle, should contain reset entries of
-                    reset-names.
-- #sound-dai-cells: should be 1.
-
-Example:
-
-	codec {
-		compatible = "socionext,uniphier-evea";
-		reg = <0x57900000 0x1000>;
-		clock-names = "evea", "exiv";
-		clocks = <&sys_clk 41>, <&sys_clk 42>;
-		reset-names = "evea", "exiv", "adamv";
-		resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
-		#sound-dai-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.txt b/Documentation/devicetree/bindings/sound/wlf,arizona.txt
deleted file mode 100644
index e172c62dc2df..000000000000
--- a/Documentation/devicetree/bindings/sound/wlf,arizona.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Cirrus Logic Arizona class audio SoCs
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-This document lists sound specific bindings, see the primary binding
-document:
-  ../mfd/arizona.txt
-
-Optional properties:
-
-  - wlf,inmode : A list of INn_MODE register values, where n is the number
-    of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
-    2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
-    If present, values must be specified less than or equal to the number of
-    input signals. If values less than the number of input signals, elements
-    that have not been specified are set to 0 by default. Entries are:
-    <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
-    <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
-  - wlf,out-mono : A list of boolean values indicating whether each output is
-    mono or stereo. Position within the list indicates the output affected
-    (eg. First entry in the list corresponds to output 1). A non-zero value
-    indicates a mono output. If present, the number of values should be less
-    than or equal to the number of outputs, if less values are supplied the
-    additional outputs will be treated as stereo.
-
-  - wlf,dmic-ref : DMIC reference voltage source for each input, can be
-    selected from either MICVDD or one of the MICBIAS's, defines
-    (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
-    present, the number of values should be less than or equal to the
-    number of inputs, unspecified inputs will use the chip default.
-
-  - wlf,max-channels-clocked : The maximum number of channels to be clocked on
-    each AIF, useful for I2S systems with multiple data lines being mastered.
-    Specify one cell for each AIF to be configured, specify zero for AIFs that
-    should be handled normally.
-    If present, number of cells must be less than or equal to the number of
-    AIFs. If less than the number of AIFs, for cells that have not been
-    specified the corresponding AIFs will be treated as default setting.
-
-  - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6).
-    See the datasheet for values.
-    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
-      wm8998, wm1814)
-
-  - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).
-    See the datasheet for values.
-    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
-    wm8998, wm1814)
-
-  - wlf,out-volume-limit : The volume limit value that should be applied to each
-    output channel. See the datasheet for exact values. Channels are specified
-    in the order OUT1L, OUT1R, OUT2L, OUT2R, etc.
diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml
new file mode 100644
index 000000000000..1627c0bb69be
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  These devices are audio SoCs with extensive digital capabilities and a range
+  of analogue I/O.
+
+  This document lists sound specific bindings, see the primary binding
+  document ../mfd/arizona.yaml
+
+properties:
+  '#sound-dai-cells':
+    description:
+      The first cell indicating the audio interface.
+    const: 1
+
+  wlf,inmode:
+    description:
+      A list of INn_MODE register values, where n is the number of input
+      signals. Valid values are 0 (Differential), 1 (Single-ended) and
+      2 (Digital Microphone). If absent, INn_MODE registers set to 0 by
+      default.  If present, values must be specified less than or equal
+      to the number of input signals. If values less than the number of
+      input signals, elements that have not been specified are set to 0 by
+      default. Entries are <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280,
+      wm8997) and <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 2
+      default: 0
+
+  wlf,out-mono:
+    description:
+      A list of boolean values indicating whether each output is mono
+      or stereo. Position within the list indicates the output affected
+      (eg. First entry in the list corresponds to output 1). A non-zero
+      value indicates a mono output. If present, the number of values
+      should be less than or equal to the number of outputs, if less values
+      are supplied the additional outputs will be treated as stereo.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 6
+    items:
+      minimum: 0
+      maximum: 1
+      default: 0
+
+  wlf,dmic-ref:
+    description:
+      DMIC reference voltage source for each input, can be selected from
+      either MICVDD or one of the MICBIAS's, defines (ARIZONA_DMIC_xxxx)
+      are provided in dt-bindings/mfd/arizona.h. If present, the number
+      of values should be less than or equal to the number of inputs,
+      unspecified inputs will use the chip default.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 3
+      default: 0
+
+  wlf,max-channels-clocked:
+    description:
+      The maximum number of channels to be clocked on each AIF, useful for
+      I2S systems with multiple data lines being mastered.  Specify one
+      cell for each AIF to be configured, specify zero for AIFs that should
+      be handled normally.  If present, number of cells must be less than
+      or equal to the number of AIFs. If less than the number of AIFs, for
+      cells that have not been specified the corresponding AIFs will be
+      treated as default setting.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 3
+    items:
+      default: 0
+
+  wlf,spk-fmt:
+    description:
+      PDM speaker data format, must contain 2 cells (OUT5 and OUT6).  See
+      the datasheet for values.  The second cell is ignored for codecs that
+      do not have OUT6 (wm5102, wm8997, wm8998, wm1814)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+  wlf,spk-mute:
+    description:
+      PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).  See
+      the datasheet for values.  The second cell is ignored for codecs that
+      do not have OUT6 (wm5102, wm8997, wm8998, wm1814)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+  wlf,out-volume-limit:
+    description:
+      The volume limit value that should be applied to each output
+      channel. See the datasheet for exact values. Channels are specified
+      in the order OUT1L, OUT1R, OUT2L, OUT2R, etc.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 12
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
new file mode 100644
index 000000000000..15795f63b5a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8731.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson Microelectromics WM8731 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Wolfson Microelectronics WM8731 audio CODEC
+
+  Pins on the device (for linking into audio routes):
+    * LOUT: Left Channel Line Output
+    * ROUT: Right Channel Line Output
+    * LHPOUT: Left Channel Headphone Output
+    * RHPOUT: Right Channel Headphone Output
+    * LLINEIN: Left Channel Line Input
+    * RLINEIN: Right Channel Line Input
+    * MICIN: Microphone Input
+
+properties:
+  compatible:
+    enum:
+      - wlf,wm8731
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    description: Clock provider for MCLK pin.
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  AVDD-supply:
+    description: Analog power supply regulator on the AVDD pin.
+
+  HPVDD-supply:
+    description: Headphone power supply regulator on the HPVDD pin.
+
+  DBVDD-supply:
+    description: Digital buffer supply regulator for the DBVDD pin.
+
+  DCVDD-supply:
+    description: Digital core supply regulator for the DCVDD pin.
+
+required:
+  - reg
+  - compatible
+  - AVDD-supply
+  - HPVDD-supply
+  - DBVDD-supply
+  - DCVDD-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wm8731_i2c: codec@0 {
+            compatible = "wlf,wm8731";
+            reg = <0>;
+            spi-max-frequency = <12500000>;
+
+            AVDD-supply = <&avdd_reg>;
+            HPVDD-supply = <&hpvdd_reg>;
+            DCVDD-supply = <&dcvdd_reg>;
+            DBVDD-supply = <&dbvdd_reg>;
+        };
+    };
+  - |
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wm8731_spi: codec@1b {
+            compatible = "wlf,wm8731";
+            reg = <0x1b>;
+
+            AVDD-supply = <&avdd_reg>;
+            HPVDD-supply = <&hpvdd_reg>;
+            DCVDD-supply = <&dcvdd_reg>;
+            DBVDD-supply = <&dbvdd_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
new file mode 100644
index 000000000000..7105ed5fd6c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/wlf,wm8903.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: WM8903 audio codec
+
+description: |
+  This device supports I2C only.
+  Pins on the device (for linking into audio routes):
+      * IN1L
+      * IN1R
+      * IN2L
+      * IN2R
+      * IN3L
+      * IN3R
+      * DMICDAT
+      * HPOUTL
+      * HPOUTR
+      * LINEOUTL
+      * LINEOUTR
+      * LOP
+      * LON
+      * ROP
+      * RON
+      * MICBIAS
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  compatible:
+    const: wlf,wm8903
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+  '#gpio-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  micdet-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description: Default register value for R6 (Mic Bias).
+
+  micdet-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 100
+    description: The debounce delay for microphone detection in mS.
+
+  gpio-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      minItems: 5
+      maxItems: 5
+      A list of GPIO configuration register values.
+      If absent, no configuration of these registers is performed.
+      If any entry has the value 0xffffffff, that GPIO's
+      configuration will not be modified.
+
+  AVDD-supply:
+    description: Analog power supply regulator on the AVDD pin.
+
+  CPVDD-supply:
+    description: Charge pump supply regulator on the CPVDD pin.
+
+  DBVDD-supply:
+    description: Digital buffer supply regulator for the DBVDD pin.
+
+  DCVDD-supply:
+    description: Digital core supply regulator for the DCVDD pin.
+
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      wm8903: codec@1a {
+        compatible = "wlf,wm8903";
+        reg = <0x1a>;
+        interrupts = <347>;
+
+        AVDD-supply = <&fooreg_a>;
+        CPVDD-supply = <&fooreg_b>;
+        DBVDD-supply = <&fooreg_c>;
+        DCVDD-supply = <&fooreg_d>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        micdet-cfg = <0>;
+        micdet-delay = <100>;
+        gpio-cfg = <
+          0x0600 /* DMIC_LR, output */
+          0x0680 /* DMIC_DAT, input */
+          0x0000 /* GPIO, output, low */
+          0x0200 /* Interrupt, output */
+          0x01a0 /* BCLK, input, active high */
+        >;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml
new file mode 100644
index 000000000000..7386abb3a250
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8940.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8940 Codec
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  '#sound-dai-cells':
+    const: 0
+
+  compatible:
+    const: wlf,wm8940
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 526000
+
+required:
+  - '#sound-dai-cells'
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@0 {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8940";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8940";
+            reg = <0x1a>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml
new file mode 100644
index 000000000000..5e172e9462b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8962.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8962 Ultra-Low Power Stereo CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  compatible:
+    const: wlf,wm8962
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  AVDD-supply:
+    description: Analogue supply.
+
+  CPVDD-supply:
+    description: Charge pump power supply.
+
+  DBVDD-supply:
+    description: Digital Buffer Supply.
+
+  DCVDD-supply:
+    description: Digital Core Supply.
+
+  MICVDD-supply:
+    description: Microphone bias amp supply.
+
+  PLLVDD-supply:
+    description: PLL Supply
+
+  SPKVDD1-supply:
+    description: Supply for left speaker drivers.
+
+  SPKVDD2-supply:
+    description: Supply for right speaker drivers.
+
+  spk-mono:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present, the SPK_MONO bit of R51 (Class D Control 2) gets set,
+      indicating that the speaker is in mono mode.
+
+  mic-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Default register value for R48 (Additional Control 4).
+      If absent, the default should be the register default.
+
+  gpio-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 6
+    maxItems: 6
+    description:
+      A list of GPIO configuration register values.  If absent, no
+      configuration of these registers is performed.  Note that only values
+      within [0x0, 0xffff] are valid.  Any other value is regarded as setting
+      the GPIO register to its reset value 0x0.
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - AVDD-supply
+  - CPVDD-supply
+  - DBVDD-supply
+  - DCVDD-supply
+  - MICVDD-supply
+  - PLLVDD-supply
+  - SPKVDD1-supply
+  - SPKVDD2-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          wm8962: codec@1a {
+                  compatible = "wlf,wm8962";
+                  reg = <0x1a>;
+                  clocks = <&clks IMX6QDL_CLK_CKO>;
+                  DCVDD-supply = <&reg_audio>;
+                  DBVDD-supply = <&reg_audio>;
+                  AVDD-supply = <&reg_audio>;
+                  CPVDD-supply = <&reg_audio>;
+                  MICVDD-supply = <&reg_audio>;
+                  PLLVDD-supply = <&reg_audio>;
+                  SPKVDD1-supply = <&reg_audio>;
+                  SPKVDD2-supply = <&reg_audio>;
+                  gpio-cfg = <
+                          0x0000 /* 0:Default */
+                          0x0000 /* 1:Default */
+                          0x0013 /* 2:FN_DMICCLK */
+                          0x0000 /* 3:Default */
+                          0x8014 /* 4:FN_DMICCDAT */
+                          0x0000 /* 5:Default */
+                  >;
+          };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml
new file mode 100644
index 000000000000..1c8985d4dd5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8978.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8978 Codec
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  '#sound-dai-cells':
+    const: 0
+
+  compatible:
+    const: wlf,wm8978
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 526000
+
+required:
+  - '#sound-dai-cells'
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@0 {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8978";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8978";
+            reg = <0x1a>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/wm8731.txt b/Documentation/devicetree/bindings/sound/wm8731.txt
deleted file mode 100644
index f660d9bb0e69..000000000000
--- a/Documentation/devicetree/bindings/sound/wm8731.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-WM8731 audio CODEC
-
-This device supports both I2C and SPI (configured with pin strapping
-on the board).
-
-Required properties:
-
-  - compatible : "wlf,wm8731"
-
-  - reg : the I2C address of the device for I2C, the chip select
-          number for SPI.
-
-Example:
-
-wm8731: codec@1a {
-	compatible = "wlf,wm8731";
-	reg = <0x1a>;
-};
-
-Available audio endpoints for an audio-routing table:
- * LOUT: Left Channel Line Output
- * ROUT: Right Channel Line Output
- * LHPOUT: Left Channel Headphone Output
- * RHPOUT: Right Channel Headphone Output
- * LLINEIN: Left Channel Line Input
- * RLINEIN: Right Channel Line Input
- * MICIN: Microphone Input
diff --git a/Documentation/devicetree/bindings/sound/wm8750.txt b/Documentation/devicetree/bindings/sound/wm8750.txt
deleted file mode 100644
index 682f221f6f38..000000000000
--- a/Documentation/devicetree/bindings/sound/wm8750.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-WM8750 and WM8987 audio CODECs
-
-These devices support both I2C and SPI (configured with pin strapping
-on the board).
-
-Required properties:
-
-  - compatible : "wlf,wm8750" or "wlf,wm8987"
-
-  - reg : the I2C address of the device for I2C, the chip select
-          number for SPI.
-
-Example:
-
-wm8750: codec@1a {
-	compatible = "wlf,wm8750";
-	reg = <0x1a>;
-};
diff --git a/Documentation/devicetree/bindings/sound/wm8750.yaml b/Documentation/devicetree/bindings/sound/wm8750.yaml
new file mode 100644
index 000000000000..24246ac7bbdf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8750.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wm8750.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8750 and WM8987 audio CODECs
+
+description: |
+  These devices support both I2C and SPI (configured with pin strapping
+  on the board).
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - wlf,wm8750
+      - wlf,wm8987
+
+  reg:
+    description:
+      The I2C address of the device for I2C, the chip select number for SPI
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "wlf,wm8750";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wm8903.txt b/Documentation/devicetree/bindings/sound/wm8903.txt
deleted file mode 100644
index 6371c2434afe..000000000000
--- a/Documentation/devicetree/bindings/sound/wm8903.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-WM8903 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-  - compatible : "wlf,wm8903"
-
-  - reg : the I2C address of the device.
-
-  - gpio-controller : Indicates this device is a GPIO controller.
-
-  - #gpio-cells : Should be two. The first cell is the pin number and the
-    second cell is used to specify optional parameters (currently unused).
-
-Optional properties:
-
-  - interrupts : The interrupt line the codec is connected to.
-
-  - micdet-cfg : Default register value for R6 (Mic Bias). If absent, the
-    default is 0.
-
-  - micdet-delay : The debounce delay for microphone detection in mS. If
-    absent, the default is 100.
-
-  - gpio-cfg : A list of GPIO configuration register values. The list must
-    be 5 entries long. If absent, no configuration of these registers is
-    performed. If any entry has the value 0xffffffff, that GPIO's
-    configuration will not be modified.
-
-  - AVDD-supply : Analog power supply regulator on the AVDD pin.
-
-  - CPVDD-supply : Charge pump supply regulator on the CPVDD pin.
-
-  - DBVDD-supply : Digital buffer supply regulator for the DBVDD pin.
-
-  - DCVDD-supply : Digital core supply regulator for the DCVDD pin.
-
-Pins on the device (for linking into audio routes):
-
-  * IN1L
-  * IN1R
-  * IN2L
-  * IN2R
-  * IN3L
-  * IN3R
-  * DMICDAT
-  * HPOUTL
-  * HPOUTR
-  * LINEOUTL
-  * LINEOUTR
-  * LOP
-  * LON
-  * ROP
-  * RON
-  * MICBIAS
-
-Example:
-
-wm8903: codec@1a {
-	compatible = "wlf,wm8903";
-	reg = <0x1a>;
-	interrupts = < 347 >;
-
-	AVDD-supply = <&fooreg_a>;
-	CPVDD-supply = <&fooreg_b>;
-	DBVDD-supply = <&fooreg_c>;
-	DCVDC-supply = <&fooreg_d>;
-
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	micdet-cfg = <0>;
-	micdet-delay = <100>;
-	gpio-cfg = <
-		0x0600 /* DMIC_LR, output */
-		0x0680 /* DMIC_DAT, input */
-		0x0000 /* GPIO, output, low */
-		0x0200 /* Interrupt, output */
-		0x01a0 /* BCLK, input, active high */
-	>;
-};
diff --git a/Documentation/devicetree/bindings/sound/wm8960.txt b/Documentation/devicetree/bindings/sound/wm8960.txt
index 6d29ac3750ee..85d3b287108c 100644
--- a/Documentation/devicetree/bindings/sound/wm8960.txt
+++ b/Documentation/devicetree/bindings/sound/wm8960.txt
@@ -21,6 +21,17 @@ Optional properties:
 	enabled and disabled together with HP_L and HP_R pins in response to jack
 	detect events.
 
+  - wlf,hp-cfg: A list of headphone jack detect configuration register values.
+		The list must be 3 entries long.
+		hp-cfg[0]: HPSEL[1:0] of R48 (Additional Control 4).
+		hp-cfg[1]: {HPSWEN:HPSWPOL} of R24 (Additional Control 2).
+		hp-cfg[2]: {TOCLKSEL:TOEN} of R23 (Additional Control 1).
+
+  - wlf,gpio-cfg: A list of GPIO configuration register values.
+		  The list must be 2 entries long.
+		  gpio-cfg[0]: ALRCGPIO of R9 (Audio interface)
+		  gpio-cfg[1]: {GPIOPOL:GPIOSEL[2:0]} of R48 (Additional Control 4).
+
 Example:
 
 wm8960: codec@1a {
diff --git a/Documentation/devicetree/bindings/sound/wm8962.txt b/Documentation/devicetree/bindings/sound/wm8962.txt
deleted file mode 100644
index dcfa9a3369fd..000000000000
--- a/Documentation/devicetree/bindings/sound/wm8962.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-WM8962 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-  - compatible : "wlf,wm8962"
-
-  - reg : the I2C address of the device.
-
-Optional properties:
-  - spk-mono: This is a boolean property. If present, the SPK_MONO bit
-    of R51 (Class D Control 2) gets set, indicating that the speaker is
-    in mono mode.
-
-  - mic-cfg : Default register value for R48 (Additional Control 4).
-    If absent, the default should be the register default.
-
-  - gpio-cfg : A list of GPIO configuration register values. The list must
-    be 6 entries long. If absent, no configuration of these registers is
-    performed. And note that only the value within [0x0, 0xffff] is valid.
-    Any other value is regarded as setting the GPIO register by its reset
-    value 0x0.
-
-Example:
-
-wm8962: codec@1a {
-	compatible = "wlf,wm8962";
-	reg = <0x1a>;
-
-	gpio-cfg = <
-		0x0000 /* 0:Default */
-		0x0000 /* 1:Default */
-		0x0013 /* 2:FN_DMICCLK */
-		0x0000 /* 3:Default */
-		0x8014 /* 4:FN_DMICCDAT */
-		0x0000 /* 5:Default */
-	>;
-};
diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt
index 68cccc4653ba..8fa947509c10 100644
--- a/Documentation/devicetree/bindings/sound/wm8994.txt
+++ b/Documentation/devicetree/bindings/sound/wm8994.txt
@@ -14,9 +14,15 @@ Required properties:
   - #gpio-cells : Must be 2. The first cell is the pin number and the
     second cell is used to specify optional parameters (currently unused).
 
-  - AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply,
-    SPKVDD1-supply, SPKVDD2-supply : power supplies for the device, as covered
-    in Documentation/devicetree/bindings/regulator/regulator.txt
+  - power supplies for the device, as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt, depending
+    on compatible:
+    - for wlf,wm1811 and wlf,wm8958:
+      AVDD1-supply, AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply,
+      DCVDD-supply, CPVDD-supply, SPKVDD1-supply, SPKVDD2-supply
+    - for wlf,wm8994:
+      AVDD1-supply, AVDD2-supply, DBVDD-supply, DCVDD-supply, CPVDD-supply,
+      SPKVDD1-supply, SPKVDD2-supply
 
 Optional properties:
 
@@ -62,6 +68,29 @@ Optional properties:
   - wlf,csnaddr-pd : If present enable the internal pull-down resistor on
     the CS/ADDR pin.
 
+Pins on the device (for linking into audio routes):
+
+  * IN1LN
+  * IN1LP
+  * IN2LN
+  * IN2LP:VXRN
+  * IN1RN
+  * IN1RP
+  * IN2RN
+  * IN2RP:VXRP
+  * SPKOUTLP
+  * SPKOUTLN
+  * SPKOUTRP
+  * SPKOUTRN
+  * HPOUT1L
+  * HPOUT1R
+  * HPOUT2P
+  * HPOUT2N
+  * LINEOUT1P
+  * LINEOUT1N
+  * LINEOUT2P
+  * LINEOUT2N
+
 Example:
 
 wm8994: codec@1a {
@@ -73,11 +102,11 @@ wm8994: codec@1a {
 
 	lineout1-se;
 
+	AVDD1-supply = <&regulator>;
 	AVDD2-supply = <&regulator>;
 	CPVDD-supply = <&regulator>;
-	DBVDD1-supply = <&regulator>;
-	DBVDD2-supply = <&regulator>;
-	DBVDD3-supply = <&regulator>;
+	DBVDD-supply = <&regulator>;
+	DCVDD-supply = <&regulator>;
 	SPKVDD1-supply = <&regulator>;
 	SPKVDD2-supply = <&regulator>;
 };
diff --git a/Documentation/devicetree/bindings/sound/zl38060.yaml b/Documentation/devicetree/bindings/sound/zl38060.yaml
new file mode 100644
index 000000000000..338e2a13c775
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/zl38060.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/zl38060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ZL38060 Connected Home Audio Processor from Microsemi.
+
+description: |
+  The ZL38060 is a "Connected Home Audio Processor" from Microsemi,
+  which consists of a Digital Signal Processor (DSP), several Digital
+  Audio Interfaces (DAIs), analog outputs, and a block of 14 GPIOs.
+
+maintainers:
+  - Jaroslav Kysela <perex@perex.cz>
+  - Takashi Iwai <tiwai@suse.com>
+
+properties:
+  compatible:
+    const: mscc,zl38060
+
+  reg:
+    description:
+      SPI device address.
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 24000000
+
+  reset-gpios:
+    description:
+      A GPIO line handling reset of the chip. As the line is active low,
+      it should be marked GPIO_ACTIVE_LOW (see ../gpio/gpio.txt)
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec: zl38060@0 {
+            gpio-controller;
+            #gpio-cells = <2>;
+            #sound-dai-cells = <0>;
+            compatible = "mscc,zl38060";
+            reg = <0>;
+            spi-max-frequency = <12000000>;
+            reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/zte,tdm.txt b/Documentation/devicetree/bindings/sound/zte,tdm.txt
deleted file mode 100644
index 2a07ca655264..000000000000
--- a/Documentation/devicetree/bindings/sound/zte,tdm.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-ZTE TDM DAI driver
-
-Required properties:
-
-- compatible : should be one of the following.
-       * zte,zx296718-tdm
-- reg : physical base address of the controller and length of memory mapped
-    region.
-- clocks : Pairs of phandle and specifier referencing the controller's clocks.
-- clock-names: "wclk" for the wclk.
-               "pclk" for the pclk.
--#clock-cells: should be 1.
-- zte,tdm-dma-sysctrl : Reference to the sysctrl controller controlling
-    the dma. includes:
-	phandle of sysctrl.
-	register offset in sysctrl for control dma.
-	mask of the register that be written to sysctrl.
-
-Example:
-
-	tdm: tdm@1487000 {
-		compatible = "zte,zx296718-tdm";
-		reg = <0x01487000 0x1000>;
-		clocks = <&audiocrm AUDIO_TDM_WCLK>, <&audiocrm AUDIO_TDM_PCLK>;
-		clock-names = "wclk", "pclk";
-		#clock-cells = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tdm_global_pin>;
-		zte,tdm-dma-sysctrl = <&sysctrl 0x10c 4>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt b/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt
deleted file mode 100644
index 41bb1040eb71..000000000000
--- a/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-ZTE ZX AUD96P22 Audio Codec
-
-Required properties:
- - compatible: Must be "zte,zx-aud96p22"
- - #sound-dai-cells: Should be 0
- - reg: I2C bus slave address of AUD96P22
-
-Example:
-
-	i2c0: i2c@1486000 {
-		compatible = "zte,zx296718-i2c";
-		reg = <0x01486000 0x1000>;
-		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&audiocrm AUDIO_I2C0_WCLK>;
-		clock-frequency = <1600000>;
-
-		aud96p22: codec@22 {
-			compatible = "zte,zx-aud96p22";
-			#sound-dai-cells = <0>;
-			reg = <0x22>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
deleted file mode 100644
index 3927251464f0..000000000000
--- a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-ZTE ZX296702 I2S controller
-
-Required properties:
- - compatible : Must be one of:
-	"zte,zx296718-i2s", "zte,zx296702-i2s"
-	"zte,zx296702-i2s"
- - reg : Must contain I2S core's registers location and length
- - clocks : Pairs of phandle and specifier referencing the controller's clocks.
- - clock-names: "wclk" for the wclk, "pclk" for the pclk to the I2S interface.
- - dmas: Pairs of phandle and specifier for the DMA channel that is used by
-   the core. The core expects two dma channels for transmit.
- - dma-names : Must be "tx" and "rx"
-
-For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
-please check:
-	* resource-names.txt
-	* clock/clock-bindings.txt
-	* dma/dma.txt
-
-Example:
-	i2s0: i2s@b005000 {
-		#sound-dai-cells = <0>;
-		compatible = "zte,zx296718-i2s", "zte,zx296702-i2s";
-		reg = <0x0b005000 0x1000>;
-		clocks = <&audiocrm AUDIO_I2S0_WCLK>, <&audiocrm AUDIO_I2S0_PCLK>;
-		clock-names = "wclk", "pclk";
-		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-		dmas = <&dma 5>, <&dma 6>;
-		dma-names = "tx", "rx";
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "zx296702_snd";
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&i2s0>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&acodec>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt
deleted file mode 100644
index 09231d7586b2..000000000000
--- a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-ZTE ZX296702 SPDIF controller
-
-Required properties:
- - compatible : Must be "zte,zx296702-spdif"
- - reg : Must contain SPDIF core's registers location and length
- - clocks : Pairs of phandle and specifier referencing the controller's clocks.
- - clock-names: "tx" for the clock to the SPDIF interface.
- - dmas: Pairs of phandle and specifier for the DMA channel that is used by
-   the core. The core expects one dma channel for transmit.
- - dma-names : Must be "tx"
-
-For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
-please check:
-	* resource-names.txt
-	* clock/clock-bindings.txt
-	* dma/dma.txt
-
-Example:
-	spdif0: spdif0@b004000 {
-		compatible = "zte,zx296702-spdif";
-		reg = <0x0b004000 0x1000>;
-		clocks = <&lsp0clk ZX296702_SPDIF0_DIV>;
-		clock-names = "tx";
-		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		dmas = <&dma 4>;
-		dma-names = "tx";
-	};
diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
index 436547f3b155..c85c25779e3f 100644
--- a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
+++ b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
@@ -11,6 +11,7 @@ board specific bus parameters.
 		    Example:
 			"qcom,soundwire-v1.3.0"
 			"qcom,soundwire-v1.5.0"
+			"qcom,soundwire-v1.5.1"
 			"qcom,soundwire-v1.6.0"
 - reg:
 	Usage: required
@@ -21,7 +22,19 @@ board specific bus parameters.
 - interrupts:
 	Usage: required
 	Value type: <prop-encoded-array>
-	Definition: should specify the SoundWire Controller IRQ
+	Definition: should specify the SoundWire Controller core and optional
+		    wake IRQ
+
+- interrupt-names:
+	Usage: Optional
+	Value type: boolean
+	Value type: <stringlist>
+	Definition: should be "core" for core and "wakeup" for wake interrupt.
+
+- wakeup-source:
+	Usage: Optional
+	Value type: boolean
+	Definition: should specify if SoundWire Controller is wake up capable.
 
 - clock-names:
 	Usage: required
@@ -53,6 +66,8 @@ board specific bus parameters.
 	Value type: <prop-encoded-array>
 	Definition: should specify payload transport window offset1 of each
 		    data port. Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-offset2:
@@ -60,6 +75,8 @@ board specific bus parameters.
 	Value type: <prop-encoded-array>
 	Definition: should specify payload transport window offset2 of each
 		    data port. Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-sinterval-low:
@@ -68,12 +85,16 @@ board specific bus parameters.
 	Definition: should be sample interval low of each data port.
 		    Out ports followed by In ports. Used for Sample Interval
 		    calculation.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-word-length:
 	Usage: optional
 	Value type: <prop-encoded-array>
 	Definition: should be size of payload channel sample.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-block-pack-mode:
@@ -83,6 +104,8 @@ board specific bus parameters.
 		    0 to indicate Blocks are per Channel
 		    1 to indicate Blocks are per Port.
 		    Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-block-group-count:
@@ -91,6 +114,8 @@ board specific bus parameters.
 	Definition: should be in range 1 to 4 to indicate how many sample
 		    intervals are combined into a payload.
 		    Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-lane-control:
@@ -99,6 +124,8 @@ board specific bus parameters.
 	Definition: should be in range 0 to 7 to identify which	data lane
 		    the data port uses.
 		    Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-hstart:
@@ -108,6 +135,8 @@ board specific bus parameters.
 		    SoundWire Frame, i.e. left edge of the Transport sub-frame
 		    for each port. Values between 0 and 15 are valid.
 		    Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-hstop:
@@ -117,6 +146,8 @@ board specific bus parameters.
 		    SoundWire Frame, i.e. the right edge of the Transport
 		    sub-frame for each port. Values between 0 and 15 are valid.
 		    Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,dports-type:
@@ -127,8 +158,22 @@ board specific bus parameters.
 		    1 for simple ports
 		    2 for full port
 		    Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
+- reset:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: Should specify the SoundWire audio CSR reset controller interface,
+		    which is required for SoundWire version 1.6.0 and above.
+
+- reset-names:
+	Usage: optional
+	Value type: <stringlist>
+	Definition: should be "swr_audio_cgcr" for SoundWire audio CSR reset
+		    controller interface.
+
 Note:
 	More Information on detail of encoding of these fields can be
 found in MIPI Alliance SoundWire 1.0 Specifications.
@@ -147,6 +192,8 @@ soundwire: soundwire@c85 {
 	interrupts = <20 IRQ_TYPE_EDGE_RISING>;
 	clocks = <&wcc>;
 	clock-names = "iface";
+	resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
+	reset-names = "swr_audio_cgcr";
 	#sound-dai-cells = <1>;
 	qcom,dports-type = <0>;
 	qcom,dout-ports	= <6>;
diff --git a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
index 330924b8618e..4aad121eff3f 100644
--- a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
+++ b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
@@ -57,6 +57,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: true
+
 examples:
   - |
     soundwire@c2d0000 {
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
index 8036499112f5..f1176a28fd87 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/allwinner,sun4i-a10-spi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 SPI Controller Device Tree Bindings
+title: Allwinner A10 SPI Controller
 
 allOf:
   - $ref: "spi-controller.yaml"
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
index 0565dc49e449..58b7056f4a70 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/allwinner,sun6i-a31-spi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 SPI Controller Device Tree Bindings
+title: Allwinner A31 SPI Controller
 
 allOf:
   - $ref: "spi-controller.yaml"
@@ -18,9 +18,16 @@ properties:
   "#size-cells": true
 
   compatible:
-    enum:
-      - allwinner,sun6i-a31-spi
-      - allwinner,sun8i-h3-spi
+    oneOf:
+      - const: allwinner,sun6i-a31-spi
+      - const: allwinner,sun8i-h3-spi
+      - items:
+          - enum:
+              - allwinner,sun8i-r40-spi
+              - allwinner,sun50i-h6-spi
+              - allwinner,sun50i-h616-spi
+              - allwinner,suniv-f1c100s-spi
+          - const: allwinner,sun8i-h3-spi
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index 49b617c98ae7..0c10f7678178 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson SPI Communication Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 allOf:
   - $ref: "spi-controller.yaml#"
@@ -22,6 +22,7 @@ properties:
     enum:
       - amlogic,meson-gx-spicc # SPICC controller on Amlogic GX and compatible SoCs
       - amlogic,meson-axg-spicc # SPICC controller on Amlogic AXG and compatible SoCs
+      - amlogic,meson-g12a-spicc # SPICC controller on Amlogic G12A and compatible SoCs
 
   interrupts:
     maxItems: 1
@@ -33,12 +34,40 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: controller register bus clock
+      - description: baud rate generator and delay control clock
 
   clock-names:
-    description: input clock for the baud rate generator
-    items:
-      - const: core
+    minItems: 1
+    maxItems: 2
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - amlogic,meson-g12a-spicc
+
+then:
+  properties:
+    clocks:
+      minItems: 2
+
+    clock-names:
+      items:
+        - const: core
+        - const: pclk
+
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
+    clock-names:
+      items:
+        - const: core
 
 required:
   - compatible
@@ -47,6 +76,8 @@ required:
   - clocks
   - clock-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi@c1108d80 {
@@ -58,10 +89,9 @@ examples:
           #address-cells = <1>;
           #size-cells = <0>;
 
-          ethernet-switch@0 {
-              compatible = "micrel,ks8995m";
+          display@0 {
+              compatible = "lg,lg4573";
               spi-max-frequency = <1000000>;
               reg = <0>;
           };
     };
-
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
index 5f33c39d820b..ac3b2ec300ac 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson SPI Flash Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 allOf:
   - $ref: "spi-controller.yaml#"
@@ -35,6 +35,8 @@ required:
   - reg
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi@c1108c80 {
@@ -50,4 +52,3 @@ examples:
               spi-max-frequency = <40000000>;
           };
     };
-
diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
new file mode 100644
index 000000000000..fa8f4ac20985
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/aspeed,ast2600-fmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SMC controllers bindings
+
+maintainers:
+  - Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
+  - Cédric Le Goater <clg@kaod.org>
+
+description: |
+  This binding describes the Aspeed Static Memory Controllers (FMC and
+  SPI) of the AST2400, AST2500 and AST2600 SOCs.
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-fmc
+      - aspeed,ast2600-spi
+      - aspeed,ast2500-fmc
+      - aspeed,ast2500-spi
+      - aspeed,ast2400-fmc
+      - aspeed,ast2400-spi
+
+  reg:
+    items:
+      - description: registers
+      - description: memory mapping
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+
+    spi@1e620000 {
+        reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "aspeed,ast2600-fmc";
+        clocks = <&syscon ASPEED_CLK_AHB>;
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+
+        flash@0 {
+                reg = < 0 >;
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <50000000>;
+                spi-rx-bus-width = <2>;
+        };
+
+        flash@1 {
+                reg = < 1 >;
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <50000000>;
+                spi-rx-bus-width = <2>;
+        };
+
+        flash@2 {
+                reg = < 2 >;
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <50000000>;
+                spi-rx-bus-width = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
new file mode 100644
index 000000000000..4dd973e341e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/atmel,at91rm9200-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SPI device
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@microchip.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: atmel,at91rm9200-spi
+      - items:
+          - const: microchip,sam9x60-spi
+          - const: atmel,at91rm9200-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    contains:
+      const: spi_clk
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  atmel,fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum number of data the RX and TX FIFOs can store for FIFO
+      capable SPI controllers.
+    enum: [ 16, 32 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi1: spi@fffcc000 {
+        compatible = "atmel,at91rm9200-spi";
+        reg = <0xfffcc000 0x4000>;
+        interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&spi1_clk>;
+        clock-names = "spi_clk";
+        cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+        atmel,fifo-size = <32>;
+
+        mmc@0 {
+            compatible = "mmc-spi-slot";
+            reg = <0>;
+            gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;    /* CD */
+            spi-max-frequency = <25000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml b/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml
new file mode 100644
index 000000000000..1d493add4053
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/atmel,quadspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Quad Serial Peripheral Interface (QSPI)
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@microchip.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - atmel,sama5d2-qspi
+      - microchip,sam9x60-qspi
+      - microchip,sama7g5-qspi
+      - microchip,sama7g5-ospi
+
+  reg:
+    items:
+      - description: base registers
+      - description: mapped memory
+
+  reg-names:
+    items:
+      - const: qspi_base
+      - const: qspi_mmap
+
+  clocks:
+    minItems: 1
+    items:
+      - description: peripheral clock
+      - description: system clock or generic clock, if available
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: pclk
+      - enum: [ qspick, gclk ]
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: tx DMA channel
+      - description: rx DMA channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/at91.h>
+    spi@f0020000 {
+        compatible = "atmel,sama5d2-qspi";
+        reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
+        reg-names = "qspi_base", "qspi_mmap";
+        interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+        clock-names = "pclk";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_spi0_default>;
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            reg = <0>;
+            spi-rx-bus-width = <4>;
+            spi-tx-bus-width = <4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
deleted file mode 100644
index 7c40ea694352..000000000000
--- a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Atmel Quad Serial Peripheral Interface (QSPI)
-
-Required properties:
-- compatible:     Should be one of the following:
-		  - "atmel,sama5d2-qspi"
-		  - "microchip,sam9x60-qspi"
-- reg:            Should contain the locations and lengths of the base registers
-                  and the mapped memory.
-- reg-names:      Should contain the resource reg names:
-                  - qspi_base: configuration register address space
-                  - qspi_mmap: memory mapped address space
-- interrupts:     Should contain the interrupt for the device.
-- clocks:         Should reference the peripheral clock and the QSPI system
-                  clock if available.
-- clock-names:    Should contain "pclk" for the peripheral clock and "qspick"
-                  for the system clock when available.
-- #address-cells: Should be <1>.
-- #size-cells:    Should be <0>.
-
-Example:
-
-spi@f0020000 {
-	compatible = "atmel,sama5d2-qspi";
-	reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
-	reg-names = "qspi_base", "qspi_mmap";
-	interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
-	clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
-	clock-names = "pclk";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi0_default>;
-
-	m25p80@0 {
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt
index f11f295c8450..3d55dd64b1be 100644
--- a/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt
+++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt
@@ -5,7 +5,8 @@ SPI0, and the other known as the "Universal SPI Master"; part of the
 auxiliary block. This binding applies to the SPI0 controller.
 
 Required properties:
-- compatible: Should be "brcm,bcm2835-spi".
+- compatible: Should be one of "brcm,bcm2835-spi" for BCM2835/2836/2837 or
+  "brcm,bcm2711-spi" for BCM2711 or "brcm,bcm7211-spi" for BCM7211.
 - reg: Should contain register location and length.
 - interrupts: Should contain interrupt.
 - clocks: The clock feeding the SPI controller.
diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
deleted file mode 100644
index ad7ac80a3841..000000000000
--- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
+++ /dev/null
@@ -1,233 +0,0 @@
-Broadcom SPI controller
-
-The Broadcom SPI controller is a SPI master found on various SOCs, including
-BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consits
-of :
- MSPI : SPI master controller can read and write to a SPI slave device
- BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration
-	for flash reads and be configured to do single, double, quad lane
-	io with 3-byte and 4-byte addressing support.
-
- Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP.
- MSPI master can be used wihout BSPI. BRCMSTB SoCs have an additional instance
- of a MSPI master without the BSPI to use with non flash slave devices that
- use SPI protocol.
-
-Required properties:
-
-- #address-cells:
-    Must be <1>, as required by generic SPI binding.
-
-- #size-cells:
-    Must be <0>, also as required by generic SPI binding.
-
-- compatible:
-    Must be one of :
-    "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs
-    "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
-						   BRCMSTB  SoCs
-    "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"     : MSPI+BSPI on Cygnus, NSP
-    "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"     : NS2 SoCs
-
-- reg:
-    Define the bases and ranges of the associated I/O address spaces.
-    The required range is MSPI controller registers.
-
-- reg-names:
-    First name does not matter, but must be reserved for the MSPI controller
-    register range as mentioned in 'reg' above, and will typically contain
-    - "bspi_regs": BSPI register range, not required with compatible
-		   "spi-brcmstb-mspi"
-    - "mspi_regs": MSPI register range is required for compatible strings
-    - "intr_regs", "intr_status_reg" : Interrupt and status register for
-      NSP, NS2, Cygnus SoC
-
-- interrupts
-    The interrupts used by the MSPI and/or BSPI controller.
-
-- interrupt-names:
-    Names of interrupts associated with MSPI
-    - "mspi_halted" :
-    - "mspi_done": Indicates that the requested SPI operation is complete.
-    - "spi_lr_fullness_reached" : Linear read BSPI pipe full
-    - "spi_lr_session_aborted"  : Linear read BSPI pipe aborted
-    - "spi_lr_impatient" : Linear read BSPI requested when pipe empty
-    - "spi_lr_session_done" : Linear read BSPI session done
-
-- clocks:
-    A phandle to the reference clock for this block.
-
-Optional properties:
-
-
-- native-endian
-    Defined when using BE SoC and device uses BE register read/write
-
-Recommended optional m25p80 properties:
-- spi-rx-bus-width: Definition as per
-                    Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Examples:
-
-BRCMSTB SoC Example:
-
-  SPI Master (MSPI+BSPI) for SPI-NOR access:
-
-    spi@f03e3400 {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-qspi";
-		reg = <0xf03e0920 0x4 0xf03e3400 0x188 0xf03e3200 0x50>;
-		reg-names = "cs_reg", "mspi", "bspi";
-		interrupts = <0x6 0x5 0x4 0x3 0x2 0x1 0x0>;
-		interrupt-parent = <0x1c>;
-		interrupt-names = "mspi_halted",
-				  "mspi_done",
-				  "spi_lr_overread",
-				  "spi_lr_session_done",
-				  "spi_lr_impatient",
-				  "spi_lr_session_aborted",
-				  "spi_lr_fullness_reached";
-
-		clocks = <&hif_spi>;
-		clock-names = "sw_spi";
-
-		m25p80@0 {
-			#size-cells = <0x2>;
-			#address-cells = <0x2>;
-			compatible = "m25p80";
-			reg = <0x0>;
-			spi-max-frequency = <0x2625a00>;
-			spi-cpol;
-			spi-cpha;
-			m25p,fast-read;
-
-			flash0.bolt@0 {
-				reg = <0x0 0x0 0x0 0x100000>;
-			};
-
-			flash0.macadr@100000 {
-				reg = <0x0 0x100000 0x0 0x10000>;
-			};
-
-			flash0.nvram@110000 {
-				reg = <0x0 0x110000 0x0 0x10000>;
-			};
-
-			flash0.kernel@120000 {
-				reg = <0x0 0x120000 0x0 0x400000>;
-			};
-
-			flash0.devtree@520000 {
-				reg = <0x0 0x520000 0x0 0x10000>;
-			};
-
-			flash0.splash@530000 {
-				reg = <0x0 0x530000 0x0 0x80000>;
-			};
-
-			flash0@0 {
-				reg = <0x0 0x0 0x0 0x4000000>;
-			};
-		};
-	};
-
-
-    MSPI master for any SPI device :
-
-	spi@f0416000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&upg_fixed>;
-		compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-mspi";
-		reg = <0xf0416000 0x180>;
-		reg-names = "mspi";
-		interrupts = <0x14>;
-		interrupt-parent = <&irq0_aon_intc>;
-		interrupt-names = "mspi_done";
-	};
-
-iProc SoC Example:
-
-    qspi: spi@18027200 {
-	compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
-	reg = <0x18027200 0x184>,
-	      <0x18027000 0x124>,
-	      <0x1811c408 0x004>,
-	      <0x180273a0 0x01c>;
-	reg-names = "mspi_regs", "bspi_regs", "intr_regs", "intr_status_reg";
-	interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names =
-		     "spi_lr_fullness_reached",
-		     "spi_lr_session_aborted",
-		     "spi_lr_impatient",
-		     "spi_lr_session_done",
-		     "mspi_done",
-		     "mspi_halted";
-	clocks = <&iprocmed>;
-	clock-names = "iprocmed";
-	num-cs = <2>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-    };
-
-
- NS2 SoC Example:
-
-	       qspi: spi@66470200 {
-		       compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
-		       reg = <0x66470200 0x184>,
-			     <0x66470000 0x124>,
-			     <0x67017408 0x004>,
-			     <0x664703a0 0x01c>;
-		       reg-names = "mspi", "bspi", "intr_regs",
-			"intr_status_reg";
-		       interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
-		       interrupt-names = "spi_l1_intr";
-			clocks = <&iprocmed>;
-			clock-names = "iprocmed";
-			num-cs = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-	       };
-
-
- m25p80 node for NSP, NS2
-
-	 &qspi {
-		      flash: m25p80@0 {
-		      #address-cells = <1>;
-		      #size-cells = <1>;
-		      compatible = "m25p80";
-		      reg = <0x0>;
-		      spi-max-frequency = <12500000>;
-		      m25p,fast-read;
-		      spi-cpol;
-		      spi-cpha;
-
-		      partition@0 {
-				  label = "boot";
-				  reg = <0x00000000 0x000a0000>;
-		      };
-
-		      partition@a0000 {
-				  label = "env";
-				  reg = <0x000a0000 0x00060000>;
-		      };
-
-		      partition@100000 {
-				  label = "system";
-				  reg = <0x00100000 0x00600000>;
-		      };
-
-		      partition@700000 {
-				  label = "rootfs";
-				  reg = <0x00700000 0x01900000>;
-		      };
-	};
diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
new file mode 100644
index 000000000000..ec5873919170
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/brcm,spi-bcm-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SPI controller
+
+maintainers:
+  - Kamal Dasu <kdasu.kdev@gmail.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  The Broadcom SPI controller is a SPI master found on various SOCs, including
+  BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consits
+  of:
+    MSPI : SPI master controller can read and write to a SPI slave device
+    BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration
+           for flash reads and be configured to do single, double, quad lane
+           io with 3-byte and 4-byte addressing support.
+
+  Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP.
+  MSPI master can be used wihout BSPI. BRCMSTB SoCs have an additional instance
+  of a MSPI master without the BSPI to use with non flash slave devices that
+  use SPI protocol.
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: Second Instance of MSPI BRCMSTB SoCs
+        items:
+          - enum:
+              - brcm,spi-bcm7425-qspi
+              - brcm,spi-bcm7429-qspi
+              - brcm,spi-bcm7435-qspi
+              - brcm,spi-bcm7445-qspi
+              - brcm,spi-bcm7216-qspi
+              - brcm,spi-bcm7278-qspi
+          - const: brcm,spi-bcm-qspi
+          - const: brcm,spi-brcmstb-mspi
+      - description: Second Instance of MSPI BRCMSTB SoCs
+        items:
+          - enum:
+              - brcm,spi-brcmstb-qspi
+              - brcm,spi-brcmstb-mspi
+              - brcm,spi-nsp-qspi
+              - brcm,spi-ns2-qspi
+          - const: brcm,spi-bcm-qspi
+
+  reg:
+    minItems: 1
+    maxItems: 5
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mspi
+      - const: bspi
+      - enum: [ intr_regs, intr_status_reg, cs_reg ]
+      - enum: [ intr_regs, intr_status_reg, cs_reg ]
+      - enum: [ intr_regs, intr_status_reg, cs_reg ]
+
+  interrupts:
+    minItems: 1
+    maxItems: 7
+
+  interrupt-names:
+    oneOf:
+      - minItems: 1
+        items:
+          - const: mspi_done
+          - const: mspi_halted
+          - const: spi_lr_fullness_reached
+          - const: spi_lr_session_aborted
+          - const: spi_lr_impatient
+          - const: spi_lr_session_done
+          - const: spi_lr_overread
+      - const: spi_l1_intr
+
+  clocks:
+    maxItems: 1
+    description: reference clock for this block
+
+  native-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Defined when using BE SoC and device uses BE register read/write
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+examples:
+  - | # BRCMSTB SoC: SPI Master (MSPI+BSPI) for SPI-NOR access
+    spi@f03e3400 {
+            compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
+            reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>;
+            reg-names = "mspi", "bspi", "cs_reg";
+            interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>;
+            interrupt-parent = <&gic>;
+            interrupt-names = "mspi_done",
+                              "mspi_halted",
+                              "spi_lr_fullness_reached",
+                              "spi_lr_session_aborted",
+                              "spi_lr_impatient",
+                              "spi_lr_session_done",
+                              "spi_lr_overread";
+            clocks = <&hif_spi>;
+            #address-cells = <0x1>;
+            #size-cells = <0x0>;
+
+            flash@0 {
+                    #size-cells = <0x2>;
+                    #address-cells = <0x2>;
+                    compatible = "m25p80";
+                    reg = <0x0>;
+                    spi-max-frequency = <0x2625a00>;
+                    spi-cpol;
+                    spi-cpha;
+            };
+    };
+  - | # BRCMSTB SoC: MSPI master for any SPI device
+    spi@f0416000 {
+            clocks = <&upg_fixed>;
+            compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
+            reg = <0xf0416000 0x180>;
+            reg-names = "mspi";
+            interrupts = <0x14>;
+            interrupt-parent = <&irq0_aon_intc>;
+            interrupt-names = "mspi_done";
+            #address-cells = <1>;
+            #size-cells = <0>;
+    };
+  - | # iProc SoC
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@18027200 {
+            compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+            reg = <0x18027200 0x184>,
+                  <0x18027000 0x124>,
+                  <0x1811c408 0x004>,
+                  <0x180273a0 0x01c>;
+            reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+            interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "mspi_done",
+                              "mspi_halted",
+                              "spi_lr_fullness_reached",
+                              "spi_lr_session_aborted",
+                              "spi_lr_impatient",
+                              "spi_lr_session_done";
+            clocks = <&iprocmed>;
+            num-cs = <2>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+    };
+  - | # NS2 SoC
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@66470200 {
+            compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
+            reg = <0x66470200 0x184>,
+                  <0x66470000 0x124>,
+                  <0x67017408 0x004>,
+                  <0x664703a0 0x01c>;
+            reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+            interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "spi_l1_intr";
+            clocks = <&iprocmed>;
+            num-cs = <2>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            flash@0 {
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+                    compatible = "m25p80";
+                    reg = <0x0>;
+                    spi-max-frequency = <12500000>;
+                    spi-cpol;
+                    spi-cpha;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml
new file mode 100644
index 000000000000..510b82c177c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/cdns,qspi-nor-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for the Cadence QSPI controller.
+
+description:
+  See spi-peripheral-props.yaml for more info.
+
+maintainers:
+  - Vaishnav Achath <vaishnav.a@ti.com>
+
+properties:
+  # cdns,qspi-nor.yaml
+  cdns,read-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Delay for read capture logic, in clock cycles.
+
+  cdns,tshsl-ns:
+    description:
+      Delay in nanoseconds for the length that the master mode chip select
+      outputs are de-asserted between transactions.
+
+  cdns,tsd2d-ns:
+    description:
+      Delay in nanoseconds between one chip select being de-activated
+      and the activation of another.
+
+  cdns,tchsh-ns:
+    description:
+      Delay in nanoseconds between last bit of current transaction and
+      deasserting the device chip select (qspi_n_ss_out).
+
+  cdns,tslch-ns:
+    description:
+      Delay in nanoseconds between setting qspi_n_ss_out low and
+      first bit transfer.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
new file mode 100644
index 000000000000..4707294d8f59
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/cdns,qspi-nor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence Quad SPI controller
+
+maintainers:
+  - Vaishnav Achath <vaishnav.a@ti.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: xlnx,versal-ospi-1.0
+    then:
+      required:
+        - power-domains
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,k2g-qspi
+              - ti,am654-ospi
+              - intel,lgm-qspi
+              - xlnx,versal-ospi-1.0
+              - intel,socfpga-qspi
+          - const: cdns,qspi-nor
+      - const: cdns,qspi-nor
+
+  reg:
+    items:
+      - description: the controller register set
+      - description: the controller data area
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  cdns,fifo-depth:
+    description:
+      Size of the data FIFO in words.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum: [ 128, 256 ]
+    default: 128
+
+  cdns,fifo-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bus width of the data FIFO in bytes.
+    default: 4
+
+  cdns,trigger-address:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      32-bit indirect AHB trigger address.
+
+  cdns,is-decoded-cs:
+    type: boolean
+    description:
+      Flag to indicate whether decoder is used to select different chip select
+      for different memory regions.
+
+  cdns,rclk-en:
+    type: boolean
+    description:
+      Flag to indicate that QSPI return clock is used to latch the read
+      data rather than the QSPI clock. Make sure that QSPI return clock
+      is populated on the board before using this property.
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum: [ qspi, qspi-ocp ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - cdns,fifo-depth
+  - cdns,fifo-width
+  - cdns,trigger-address
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    qspi: spi@ff705000 {
+      compatible = "cdns,qspi-nor";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      reg = <0xff705000 0x1000>,
+            <0xffa00000 0x1000>;
+      interrupts = <0 151 4>;
+      clocks = <&qspi_clk>;
+      cdns,fifo-depth = <128>;
+      cdns,fifo-width = <4>;
+      cdns,trigger-address = <0x00000000>;
+      resets = <&rst 0x1>, <&rst 0x2>;
+      reset-names = "qspi", "qspi-ocp";
+
+      flash@0 {
+              compatible = "jedec,spi-nor";
+              reg = <0x0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
new file mode 100644
index 000000000000..b8bb8a3dbf54
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020-21 Cadence
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/cdns,xspi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence XSPI Controller
+
+maintainers:
+  - Parshuram Thombare <pthombar@cadence.com>
+
+description: |
+  The XSPI controller allows SPI protocol communication in
+  single, dual, quad or octal wire transmission modes for
+  read/write access to slaves such as SPI-NOR flash.
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    const: cdns,xspi-nor
+
+  reg:
+    items:
+      - description: address and length of the controller register set
+      - description: address and length of the Slave DMA data port
+      - description: address and length of the auxiliary registers
+
+  reg-names:
+    items:
+      - const: io
+      - const: sdma
+      - const: aux
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        xspi: spi@a0010000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "cdns,xspi-nor";
+            reg = <0x0 0xa0010000 0x0 0x1040>,
+                  <0x0 0xb0000000 0x0 0x1000>,
+                  <0x0 0xa0020000 0x0 0x100>;
+            reg-names = "io", "sdma", "aux";
+            interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-parent = <&gic>;
+
+            flash@0 {
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <75000000>;
+                reg = <0>;
+            };
+
+            flash@1 {
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <75000000>;
+                reg = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt
deleted file mode 100644
index e0fa61a1be0c..000000000000
--- a/Documentation/devicetree/bindings/spi/efm32-spi.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-* Energy Micro EFM32 SPI
-
-Required properties:
-- #address-cells: see spi-bus.txt
-- #size-cells: see spi-bus.txt
-- compatible: should be "energymicro,efm32-spi"
-- reg: Offset and length of the register set for the controller
-- interrupts: pair specifying rx and tx irq
-- clocks: phandle to the spi clock
-- cs-gpios: see spi-bus.txt
-
-Recommended properties :
-- energymicro,location: Value to write to the ROUTE register's LOCATION
-                        bitfield to configure the pinmux for the device, see
-                        datasheet for values.
-                        If this property is not provided, keeping what is
-                        already configured in the hardware, so its either the
-                        reset default 0 or whatever the bootloader did.
-
-Example:
-
-spi1: spi@4000c400 { /* USART1 */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "energymicro,efm32-spi";
-	reg = <0x4000c400 0x400>;
-	interrupts = <15 16>;
-	clocks = <&cmu 20>;
-	cs-gpios = <&gpio 51 1>; // D3
-	energymicro,location = <1>;
-
-	ks8851@0 {
-		compatible = "ks8851";
-		spi-max-frequency = <6000000>;
-		reg = <0>;
-		interrupt-parent = <&boardfpga>;
-		interrupts = <4>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml
new file mode 100644
index 000000000000..e58644558412
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/fsl,spi-fsl-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Quad Serial Peripheral Interface (QuadSPI)
+
+maintainers:
+  - Han Xu <han.xu@nxp.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-qspi
+          - fsl,imx6sx-qspi
+          - fsl,imx7d-qspi
+          - fsl,imx6ul-qspi
+          - fsl,ls1021a-qspi
+          - fsl,ls2080a-qspi
+      - items:
+          - enum:
+              - fsl,ls1043a-qspi
+          - const: fsl,ls1021a-qspi
+      - items:
+          - enum:
+              - fsl,imx8mq-qspi
+          - const: fsl,imx7d-qspi
+
+  reg:
+    items:
+      - description: registers
+      - description: memory mapping
+
+  reg-names:
+    items:
+      - const: QuadSPI
+      - const: QuadSPI-memory
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC SPI qspi_en clock
+      - description: SoC SPI qspi clock
+
+  clock-names:
+    items:
+      - const: qspi_en
+      - const: qspi
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        spi@1550000 {
+            compatible = "fsl,ls1021a-qspi";
+            reg = <0x0 0x1550000 0x0 0x100000>,
+                  <0x0 0x40000000 0x0 0x10000000>;
+            reg-names = "QuadSPI", "QuadSPI-memory";
+            interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>,
+                     <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>;
+            clock-names = "qspi_en", "qspi";
+
+            flash@0 {
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <50000000>;
+                reg = <0>;
+                spi-rx-bus-width = <4>;
+                spi-tx-bus-width = <4>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
deleted file mode 100644
index 2d3264140cc5..000000000000
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale (Enhanced) Configurable Serial Peripheral Interface
-  (CSPI/eCSPI) for i.MX
-
-Required properties:
-- compatible :
-  - "fsl,imx1-cspi" for SPI compatible with the one integrated on i.MX1
-  - "fsl,imx21-cspi" for SPI compatible with the one integrated on i.MX21
-  - "fsl,imx27-cspi" for SPI compatible with the one integrated on i.MX27
-  - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31
-  - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
-  - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
-  - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
-  - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
-- reg : Offset and length of the register set for the device
-- interrupts : Should contain CSPI/eCSPI interrupt
-- clocks : Clock specifiers for both ipg and per clocks.
-- clock-names : Clock names should include both "ipg" and "per"
-See the clock consumer binding,
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Recommended properties:
-- cs-gpios : GPIOs to use as chip selects, see spi-bus.txt.  While the native chip
-select lines can be used, they appear to always generate a pulse between each
-word of a transfer.  Most use cases will require GPIO based chip selects to
-generate a valid transaction.
-
-Optional properties:
-- num-cs :  Number of total chip selects, see spi-bus.txt.
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-Documentation/devicetree/bindings/dma/dma.txt.
-- dma-names: DMA request names, if present, should include "tx" and "rx".
-- fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register
-controlling the SPI_READY handling. Note that to enable the DRCTL consideration,
-the SPI_READY mode-flag needs to be set too.
-Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
-
-Obsolete properties:
-- fsl,spi-num-chipselects : Contains the number of the chipselect
-
-Example:
-
-ecspi@70010000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx51-ecspi";
-	reg = <0x70010000 0x4000>;
-	interrupts = <36>;
-	cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
-		   <&gpio3 25 0>; /* GPIO3_25 */
-	dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
-	dma-names = "rx", "tx";
-	fsl,spi-rdy-drctl = <1>;
-};
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
new file mode 100644
index 000000000000..50df1a40bbe3
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/fsl-imx-cspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale (Enhanced) Configurable Serial Peripheral Interface (CSPI/eCSPI) for i.MX
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx1-cspi
+      - const: fsl,imx21-cspi
+      - const: fsl,imx27-cspi
+      - const: fsl,imx31-cspi
+      - const: fsl,imx35-cspi
+      - const: fsl,imx51-ecspi
+      - const: fsl,imx53-ecspi
+      - items:
+          - enum:
+              - fsl,imx50-ecspi
+              - fsl,imx6q-ecspi
+              - fsl,imx6sx-ecspi
+              - fsl,imx6sl-ecspi
+              - fsl,imx6sll-ecspi
+              - fsl,imx6ul-ecspi
+              - fsl,imx7d-ecspi
+              - fsl,imx8mq-ecspi
+              - fsl,imx8mm-ecspi
+              - fsl,imx8mn-ecspi
+              - fsl,imx8mp-ecspi
+          - const: fsl,imx51-ecspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC SPI ipg clock
+      - description: SoC SPI per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  fsl,spi-rdy-drctl:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Integer, representing the value of DRCTL, the register controlling
+      the SPI_READY handling. Note that to enable the DRCTL consideration,
+      the SPI_READY mode-flag needs to be set too.
+      Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
+    enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    spi@70010000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx51-ecspi";
+        reg = <0x70010000 0x4000>;
+        interrupts = <36>;
+        clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+                 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+        clock-names = "ipg", "per";
+    };
diff --git a/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
new file mode 100644
index 000000000000..7797c3123b7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/hpe,gxp-spifi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP spi controller flash interface
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+  - Jean-Marie Verdun <verdun@hpe.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: hpe,gxp-spifi
+
+  reg:
+    items:
+      - description: cfg registers
+      - description: data registers
+      - description: mapped memory
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    spi@200 {
+      compatible = "hpe,gxp-spifi";
+      reg = <0x200 0x80>, <0xc000 0x100>, <0x38000000 0x800000>;
+      interrupts = <20>;
+      interrupt-parent = <&vic0>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        reg = <0>;
+        compatible = "jedec,spi-nor";
+      };
+
+      flash@1 {
+        reg = <1>;
+        compatible = "jedec,spi-nor";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spi/ingenic,spi.yaml b/Documentation/devicetree/bindings/spi/ingenic,spi.yaml
new file mode 100644
index 000000000000..360f76c226d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/ingenic,spi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/ingenic,spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs SPI controller devicetree bindings
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4750-spi
+          - ingenic,jz4775-spi
+          - ingenic,jz4780-spi
+          - ingenic,x1000-spi
+          - ingenic,x2000-spi
+      - items:
+          - enum:
+              - ingenic,jz4760-spi
+              - ingenic,jz4770-spi
+          - const: ingenic,jz4750-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 2
+    minItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+    spi@10043000 {
+      compatible = "ingenic,jz4770-spi", "ingenic,jz4750-spi";
+      reg = <0x10043000 0x1c>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <8>;
+
+      clocks = <&cgu JZ4770_CLK_SSI0>;
+
+      dmas = <&dmac1 23 0xffffffff>, <&dmac1 22 0xffffffff>;
+      dma-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
new file mode 100644
index 000000000000..0abcac385e7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/marvell,mmp2-ssp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PXA2xx SSP SPI Controller bindings
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: marvell,mmp2-ssp
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  ready-gpios:
+    description: |
+      GPIO used to signal a SPI master that the FIFO is filled and we're
+      ready to service a transfer. Only useful in slave mode.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+dependencies:
+  ready-gpios: [ spi-slave ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2.h>
+    spi@d4035000 {
+        compatible = "marvell,mmp2-ssp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xd4035000 0x1000>;
+        clocks = <&soc_clocks MMP2_CLK_SSP0>;
+        interrupts = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
new file mode 100644
index 000000000000..8d2a6c084eab
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mediatek,spi-mt65xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI Bus controller for MediaTek ARM SoCs
+
+maintainers:
+  - Leilk Liu <leilk.liu@mediatek.com>
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7629-spi
+              - mediatek,mt8365-spi
+          - const: mediatek,mt7622-spi
+      - items:
+          - enum:
+              - mediatek,mt8516-spi
+          - const: mediatek,mt2712-spi
+      - items:
+          - enum:
+              - mediatek,mt6779-spi
+              - mediatek,mt8186-spi
+              - mediatek,mt8192-spi
+              - mediatek,mt8195-spi
+          - const: mediatek,mt6765-spi
+      - items:
+          - enum:
+              - mediatek,mt7986-spi-ipm
+              - mediatek,mt8188-spi-ipm
+          - const: mediatek,spi-ipm
+      - items:
+          - enum:
+              - mediatek,mt2701-spi
+              - mediatek,mt2712-spi
+              - mediatek,mt6589-spi
+              - mediatek,mt6765-spi
+              - mediatek,mt6893-spi
+              - mediatek,mt7622-spi
+              - mediatek,mt8135-spi
+              - mediatek,mt8173-spi
+              - mediatek,mt8183-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description: clock used for the parent clock
+      - description: clock used for the muxes clock
+      - description: clock used for the clock gate
+      - description: clock used for the AHB bus, this clock is optional
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: parent-clk
+      - const: sel-clk
+      - const: spi-clk
+      - const: hclk
+
+  mediatek,pad-select:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [0, 1, 2, 3]
+    description:
+      specify which pins group(ck/mi/mo/cs) spi controller used.
+      This is an array.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi@1100a000 {
+      compatible = "mediatek,mt8173-spi";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      reg = <0x1100a000 0x1000>;
+      interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+               <&topckgen CLK_TOP_SPI_SEL>,
+               <&pericfg CLK_PERI_SPI0>;
+      clock-names = "parent-clk", "sel-clk", "spi-clk";
+      cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>;
+      mediatek,pad-select = <1>, <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml
new file mode 100644
index 000000000000..a453996c13f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mediatek,spi-mtk-nor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Serial NOR flash controller for MediaTek ARM SoCs
+
+maintainers:
+  - Bayi Cheng <bayi.cheng@mediatek.com>
+  - Chuanhong Guo <gch981213@gmail.com>
+
+description: |
+  This spi controller support single, dual, or quad mode transfer for
+  SPI NOR flash. There should be only one spi slave device following
+  generic spi bindings. It's not recommended to use this controller
+  for devices other than SPI NOR flash due to limited transfer
+  capability of this controller.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-nor
+          - mediatek,mt8186-nor
+          - mediatek,mt8192-nor
+      - items:
+          - enum:
+              - mediatek,mt2701-nor
+              - mediatek,mt2712-nor
+              - mediatek,mt7622-nor
+              - mediatek,mt7623-nor
+              - mediatek,mt7629-nor
+              - mediatek,mt8195-nor
+          - const: mediatek,mt8173-nor
+      - items:
+          - enum:
+              - mediatek,mt8188-nor
+          - const: mediatek,mt8186-nor
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: clock used for spi bus
+      - description: clock used for controller
+      - description: clock used for nor dma bus. this depends on hardware
+                     design, so this is optional.
+      - description: clock used for controller axi slave bus.
+                     this depends on hardware design, so it is optional.
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: spi
+      - const: sf
+      - const: axi
+      - const: axi_s
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      nor_flash: spi@1100d000 {
+        compatible = "mediatek,mt8173-nor";
+        reg = <0 0x1100d000 0 0xe0>;
+        interrupts = <1>;
+        clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>,
+                 <&pericfg CLK_PERI_NFI>;
+        clock-names = "spi", "sf", "axi";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+          compatible = "jedec,spi-nor";
+          reg = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
new file mode 100644
index 000000000000..6e6e02c91780
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mediatek,spi-mtk-snfi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-NAND flash controller for MediaTek ARM SoCs
+
+maintainers:
+  - Chuanhong Guo <gch981213@gmail.com>
+
+description: |
+  The Mediatek SPI-NAND flash controller is an extended version of
+  the Mediatek NAND flash controller. It can perform standard SPI
+  instructions with one continuous write and one read for up-to 0xa0
+  bytes. It also supports typical SPI-NAND page cache operations
+  in single, dual or quad IO mode with pipelined ECC encoding/decoding
+  using the accompanying ECC engine. There should be only one spi
+  slave device following generic spi bindings.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-snand
+      - mediatek,mt7629-snand
+
+  reg:
+    items:
+      - description: core registers
+
+  interrupts:
+    items:
+      - description: NFI interrupt
+
+  clocks:
+    items:
+      - description: clock used for the controller
+      - description: clock used for the SPI bus
+
+  clock-names:
+    items:
+      - const: nfi_clk
+      - const: pad_clk
+
+  nand-ecc-engine:
+    description: device-tree node of the accompanying ECC engine.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - nand-ecc-engine
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt7622-clk.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      snfi: spi@1100d000 {
+        compatible = "mediatek,mt7622-snand";
+        reg = <0 0x1100d000 0 0x1000>;
+        interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>;
+        clock-names = "nfi_clk", "pad_clk";
+        nand-ecc-engine = <&bch>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+          compatible = "spi-nand";
+          reg = <0>;
+          spi-tx-bus-width = <4>;
+          spi-rx-bus-width = <4>;
+          nand-ecc-engine = <&snfi>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml
new file mode 100644
index 000000000000..7977799a8ee1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mediatek,spi-slave-mt27xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI Slave controller for MediaTek ARM SoCs
+
+maintainers:
+  - Leilk Liu <leilk.liu@mediatek.com>
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2712-spi-slave
+      - mediatek,mt8195-spi-slave
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: spi
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2712-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi@10013000 {
+      compatible = "mediatek,mt2712-spi-slave";
+      reg = <0x10013000 0x100>;
+      interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&infracfg CLK_INFRA_AO_SPI1>;
+      clock-names = "spi";
+      assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
new file mode 100644
index 000000000000..1051690e3753
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/microchip,mpfs-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip FPGA {Q,}SPI Controllers
+
+description:
+  SPI and QSPI controllers on Microchip PolarFire SoC and the "soft"/
+  fabric IP cores they are based on
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,mpfs-qspi
+          - const: microchip,coreqspi-rtl-v2
+      - const: microchip,coreqspi-rtl-v2 #FPGA QSPI
+      - const: microchip,mpfs-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    spi@20108000 {
+        compatible = "microchip,mpfs-spi";
+        reg = <0x20108000 0x1000>;
+        clocks = <&clkcfg CLK_SPI0>;
+        interrupt-parent = <&plic>;
+        interrupts = <54>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
new file mode 100644
index 000000000000..3fd0a8adfe9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mikrotik,rb4xx-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MikroTik RB4xx series SPI master
+
+maintainers:
+  - Gabor Juhos <juhosg@openwrt.org>
+  - Bert Vermeulen <bert@biot.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    const: mikrotik,rb4xx-spi
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi: spi@1f000000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "mikrotik,rb4xx-spi";
+        reg = <0x1f000000 0x10>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml b/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml
new file mode 100644
index 000000000000..a3aa5e07c0e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mxicy,mx25f0a-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Macronix SPI controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    const: mxicy,mx25f0a-spi
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: regs
+      - const: dirmap
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: send_clk
+      - const: send_dly_clk
+      - const: ps_clk
+
+  nand-ecc-engine:
+    description: NAND ECC engine used by the SPI controller in order to perform
+      on-the-fly correction when using a SPI-NAND memory.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@43c30000 {
+      compatible = "mxicy,mx25f0a-spi";
+      reg = <0x43c30000 0x10000>, <0xa0000000 0x20000000>;
+      reg-names = "regs", "dirmap";
+      clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 18>;
+      clock-names = "send_clk", "send_dly_clk", "ps_clk";
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt
deleted file mode 100644
index 3499b73293c2..000000000000
--- a/Documentation/devicetree/bindings/spi/mxs-spi.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Freescale MX233/MX28 SSP/SPI
-
-Required properties:
-- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
-- reg: Offset and length of the register set for the device
-- interrupts: Should contain SSP ERROR interrupt
-- dmas: DMA specifier, consisting of a phandle to DMA controller node
-  and SSP DMA channel ID.
-  Refer to dma.txt and fsl-mxs-dma.txt for details.
-- dma-names: Must be "rx-tx".
-
-Optional properties:
-- clock-frequency : Input clock frequency to the SPI block in Hz.
-		    Default is 160000000 Hz.
-
-Example:
-
-ssp0: ssp@80010000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx28-spi";
-	reg = <0x80010000 0x2000>;
-	interrupts = <96>;
-	dmas = <&dma_apbh 0>;
-	dma-names = "rx-tx";
-};
diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.yaml b/Documentation/devicetree/bindings/spi/mxs-spi.yaml
new file mode 100644
index 000000000000..51f8c664323e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mxs-spi.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mxs-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MX233/MX28 SSP/SPI
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-spi
+      - fsl,imx28-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+  clock-frequency:
+    description: input clock frequency to the SPI block in Hz.
+    default: 160000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@80010000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx28-spi";
+        reg = <0x80010000 0x2000>;
+        interrupts = <96>;
+        dmas = <&dma_apbh 0>;
+        dma-names = "rx-tx";
+    };
diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
index a388005842ad..c63ce4cc0a80 100644
--- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
+++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
@@ -6,8 +6,13 @@ The NPCM7XX supports three FIU modules,
 FIU0 and FIUx supports two chip selects,
 FIU3 support four chip select.
 
+The NPCM8XX supports four FIU modules,
+FIU0 and FIUx supports two chip selects,
+FIU1 and FIU3 supports four chip selects.
+
 Required properties:
-  - compatible : "nuvoton,npcm750-fiu" for the NPCM7XX BMC
+  - compatible : "nuvoton,npcm750-fiu" for Poleg NPCM7XX BMC
+			     "nuvoton,npcm845-fiu" for Arbel NPCM8XX BMC
   - #address-cells : should be 1.
   - #size-cells : should be 0.
   - reg : the first contains the register location and length,
@@ -30,6 +35,12 @@ Aliases:
   		fiu1 represent fiu 3 controller
   		fiu2 represent fiu x controller
 
+  In the NPCM8XX BMC:
+  		fiu0 represent fiu 0 controller
+  		fiu1 represent fiu 1 controller
+  		fiu2 represent fiu 3 controller
+  		fiu3 represent fiu x controller
+
 Example:
 fiu3: spi@c00000000 {
 	compatible = "nuvoton,npcm750-fiu";
diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
index b98203ca656d..a4e72e52af59 100644
--- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
+++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
@@ -3,7 +3,8 @@ Nuvoton NPCM Peripheral Serial Peripheral Interface(PSPI) controller driver
 Nuvoton NPCM7xx SOC support two PSPI channels.
 
 Required properties:
- - compatible : "nuvoton,npcm750-pspi" for NPCM7XX BMC
+ - compatible : "nuvoton,npcm750-pspi" for Poleg NPCM7XX.
+				"nuvoton,npcm845-pspi" for Arbel NPCM8XX.
  - #address-cells : should be 1. see spi-bus.txt
  - #size-cells : should be 0. see spi-bus.txt
  - specifies physical base address and size of the register.
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml
new file mode 100644
index 000000000000..2c3cada75339
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra210-quad-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for Tegra Quad SPI Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+  nvidia,tx-clk-tap-delay:
+    description:
+      Delays the clock going out to device with this tap value.
+      Tap value varies based on platform design trace lengths from Tegra
+      QSPI to corresponding slave device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+
+  nvidia,rx-clk-tap-delay:
+    description:
+      Delays the clock coming in from the device with this tap value.
+      Tap value varies based on platform design trace lengths from Tegra
+      QSPI to corresponding slave device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
new file mode 100644
index 000000000000..6b733e5c1163
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra210-quad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra Quad SPI Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra210-qspi
+      - nvidia,tegra186-qspi
+      - nvidia,tegra194-qspi
+      - nvidia,tegra234-qspi
+      - nvidia,tegra241-qspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: qspi
+      - const: qspi_out
+
+  clocks:
+    maxItems: 2
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+patternProperties:
+  "@[0-9a-f]+":
+    type: object
+
+    properties:
+      spi-rx-bus-width:
+        enum: [1, 2, 4]
+
+      spi-tx-bus-width:
+        enum: [1, 2, 4]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/reset/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    spi@70410000 {
+            compatible = "nvidia,tegra210-qspi";
+            reg = <0x70410000 0x1000>;
+            interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clocks = <&tegra_car TEGRA210_CLK_QSPI>,
+                     <&tegra_car TEGRA210_CLK_QSPI_PM>;
+            clock-names = "qspi", "qspi_out";
+            resets = <&tegra_car 211>;
+            dmas = <&apbdma 5>, <&apbdma 5>;
+            dma-names = "rx", "tx";
+
+            flash@0 {
+                    compatible = "jedec,spi-nor";
+                    reg = <0>;
+                    spi-max-frequency = <104000000>;
+                    spi-tx-bus-width = <2>;
+                    spi-rx-bus-width = <2>;
+                    nvidia,tx-clk-tap-delay = <0>;
+                    nvidia,rx-clk-tap-delay = <0>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt
deleted file mode 100644
index 487208c256c0..000000000000
--- a/Documentation/devicetree/bindings/spi/omap-spi.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-OMAP2+ McSPI device
-
-Required properties:
-- compatible :
-  - "ti,am654-mcspi" for AM654.
-  - "ti,omap2-mcspi" for OMAP2 & OMAP3.
-  - "ti,omap4-mcspi" for OMAP4+.
-- ti,spi-num-cs : Number of chipselect supported  by the instance.
-- ti,hwmods: Name of the hwmod associated to the McSPI
-- ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as
-			  input. The default is D0 as input and
-			  D1 as output.
-
-Optional properties:
-- dmas: List of DMA specifiers with the controller specific format
-	as described in the generic DMA client binding. A tx and rx
-	specifier is required for each chip select.
-- dma-names: List of DMA request names. These strings correspond
-	1:1 with the DMA specifiers listed in dmas. The string naming
-	is to be "rxN" and "txN" for RX and TX requests,
-	respectively, where N equals the chip select number.
-
-Examples:
-
-[hwmod populated DMA resources]
-
-mcspi1: mcspi@1 {
-    #address-cells = <1>;
-    #size-cells = <0>;
-    compatible = "ti,omap4-mcspi";
-    ti,hwmods = "mcspi1";
-    ti,spi-num-cs = <4>;
-};
-
-[generic DMA request binding]
-
-mcspi1: mcspi@1 {
-    #address-cells = <1>;
-    #size-cells = <0>;
-    compatible = "ti,omap4-mcspi";
-    ti,hwmods = "mcspi1";
-    ti,spi-num-cs = <2>;
-    dmas = <&edma 42
-	    &edma 43
-	    &edma 44
-	    &edma 45>;
-    dma-names = "tx0", "rx0", "tx1", "rx1";
-};
diff --git a/Documentation/devicetree/bindings/spi/omap-spi.yaml b/Documentation/devicetree/bindings/spi/omap-spi.yaml
new file mode 100644
index 000000000000..9952199cae11
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/omap-spi.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/omap-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI controller bindings for OMAP and K3 SoCs
+
+maintainers:
+  - Aswath Govindraju <a-govindraju@ti.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,am654-mcspi
+              - ti,am4372-mcspi
+          - const: ti,omap4-mcspi
+      - items:
+          - enum:
+              - ti,omap2-mcspi
+              - ti,omap4-mcspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ti,spi-num-cs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of chipselect supported  by the instance.
+    minimum: 1
+    maximum: 4
+
+  ti,hwmods:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Must be "mcspi<n>", n being the instance number (1-based).
+      This property is applicable only on legacy platforms mainly omap2/3
+      and ti81xx and should not be used on other platforms.
+    deprecated: true
+
+  ti,pindir-d0-out-d1-in:
+    description:
+      Select the D0 pin as output and D1 as input. The default is D0
+      as input and D1 as output.
+    type: boolean
+
+  dmas:
+    description:
+      List of DMA specifiers with the controller specific format as
+      described in the generic DMA client binding. A tx and rx
+      specifier is required for each chip select.
+    minItems: 1
+    maxItems: 8
+
+  dma-names:
+    description:
+      List of DMA request names. These strings correspond 1:1 with
+      the DMA sepecifiers listed in dmas. The string names is to be
+      "rxN" and "txN" for RX and TX requests, respectively. Where N
+      is the chip select number.
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,omap2-mcspi
+        - ti,omap4-mcspi
+
+then:
+  properties:
+    ti,hwmods:
+      items:
+        - pattern: "^mcspi([1-9])$"
+
+else:
+  properties:
+    ti,hwmods: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    spi@2100000 {
+      compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+      reg = <0x2100000 0x400>;
+      interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&k3_clks 137 1>;
+      power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+      dma-names = "tx0", "rx0";
+    };
diff --git a/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml
new file mode 100644
index 000000000000..7b19f2c1cb59
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qca,ar934x-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR934x/QCA95xx SoC SPI controller
+
+maintainers:
+  - Chuanhong Guo <gch981213@gmail.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: qca,ar934x-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ath79-clk.h>
+    spi: spi@1f000000 {
+        compatible = "qca,ar934x-spi";
+        reg = <0x1f000000 0x1c>;
+        clocks = <&pll ATH79_CLK_AHB>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
deleted file mode 100644
index 790311a42bf1..000000000000
--- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
-
-The QUP v3 core is a GENI based AHB slave that provides a common data path
-(an output FIFO and an input FIFO) for serial peripheral interface (SPI)
-mini-core.
-
-SPI in master mode supports up to 50MHz, up to four chip selects, programmable
-data path from 4 bits to 32 bits and numerous protocol variants.
-
-Required properties:
-- compatible:		Must contain "qcom,geni-spi".
-- reg:			Must contain SPI register location and length.
-- interrupts:		Must contain SPI controller interrupts.
-- clock-names:		Must contain "se".
-- clocks:		Serial engine core clock needed by the device.
-- #address-cells:	Must be <1> to define a chip select address on
-			the SPI bus.
-- #size-cells:		Must be <0>.
-
-SPI Controller nodes must be child of GENI based Qualcomm Universal
-Peripharal. Please refer GENI based QUP wrapper controller node bindings
-described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt.
-
-SPI slave nodes must be children of the SPI master node and conform to SPI bus
-binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
-
-Example:
-	spi0: spi@a84000 {
-		compatible = "qcom,geni-spi";
-		reg = <0xa84000 0x4000>;
-		interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-		clock-names = "se";
-		clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&qup_1_spi_2_active>;
-		pinctrl-1 = <&qup_1_spi_2_sleep>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
new file mode 100644
index 000000000000..2e20ca313ec1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-geni-qcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The QUP v3 core is a GENI based AHB slave that provides a common data path
+  (an output FIFO and an input FIFO) for serial peripheral interface (SPI)
+  mini-core.
+
+  SPI in master mode supports up to 50MHz, up to four chip selects,
+  programmable data path from 4 bits to 32 bits and numerous protocol variants.
+
+  SPI Controller nodes must be child of GENI based Qualcomm Universal
+  Peripharal. Please refer GENI based QUP wrapper controller node bindings
+  described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: qcom,geni-spi
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: se
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interconnects:
+    minItems: 2
+    maxItems: 3
+
+  interconnect-names:
+    minItems: 2
+    items:
+      - const: qup-core
+      - const: qup-config
+      - const: qup-memory
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    spi@880000 {
+        compatible = "qcom,geni-spi";
+        reg = <0x00880000 0x4000>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_spi0_default>;
+        interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        power-domains = <&rpmhpd SC7180_CX>;
+        operating-points-v2 = <&qup_opp_table>;
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+        interconnect-names = "qup-core", "qup-config";
+    };
+
+  - |
+    #include <dt-bindings/dma/qcom-gpi.h>
+
+    spi@884000 {
+        compatible = "qcom,geni-spi";
+        reg = <0x00884000 0x4000>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+        dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+               <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+        dma-names = "tx", "rx";
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_spi1_default>;
+        interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
deleted file mode 100644
index 1d64b61f5171..000000000000
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Qualcomm Quad Serial Peripheral Interface (QSPI)
-
-The QSPI controller allows SPI protocol communication in single, dual, or quad
-wire transmission modes for read/write access to slaves such as NOR flash.
-
-Required properties:
-- compatible:	An SoC specific identifier followed by "qcom,qspi-v1", such as
-		"qcom,sdm845-qspi", "qcom,qspi-v1"
-- reg:		Should contain the base register location and length.
-- interrupts:	Interrupt number used by the controller.
-- clocks:	Should contain the core and AHB clock.
-- clock-names:	Should be "core" for core clock and "iface" for AHB clock.
-
-SPI slave nodes must be children of the SPI master node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
-	qspi: spi@88df000 {
-		compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
-		reg = <0x88df000 0x600>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		clock-names = "iface", "core";
-		clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
-			 <&gcc GCC_QSPI_CORE_CLK>;
-
-		flash@0 {
-			compatible = "jedec,spi-nor";
-			reg = <0>;
-			spi-max-frequency = <25000000>;
-			spi-tx-bus-width = <2>;
-			spi-rx-bus-width = <2>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
new file mode 100644
index 000000000000..b622bb7363ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Quad Serial Peripheral Interface (QSPI)
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: The QSPI controller allows SPI protocol communication in single,
+  dual, or quad wire transmission modes for read/write access to slaves such
+  as NOR flash.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sc7180-qspi
+          - qcom,sc7280-qspi
+          - qcom,sdm845-qspi
+
+      - const: qcom,qspi-v1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  clocks:
+    items:
+      - description: AHB clock
+      - description: QSPI core clock
+
+  interconnects:
+    minItems: 1
+    maxItems: 2
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: qspi-config
+      - const: qspi-memory
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc: soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qspi: spi@88df000 {
+            compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
+            reg = <0 0x88df000 0 0x600>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+            clock-names = "iface", "core";
+            clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+                         <&gcc GCC_QSPI_CORE_CLK>;
+
+            flash@0 {
+                compatible = "jedec,spi-nor";
+                reg = <0>;
+                spi-max-frequency = <25000000>;
+                spi-tx-bus-width = <2>;
+                spi-rx-bus-width = <2>;
+            };
+
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
deleted file mode 100644
index 5c090771c016..000000000000
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
-
-The QUP core is an AHB slave that provides a common data path (an output FIFO
-and an input FIFO) for serial peripheral interface (SPI) mini-core.
-
-SPI in master mode supports up to 50MHz, up to four chip selects, programmable
-data path from 4 bits to 32 bits and numerous protocol variants.
-
-Required properties:
-- compatible:     Should contain:
-		  "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064.
-		  "qcom,spi-qup-v2.1.1" for 8974 and later
-		  "qcom,spi-qup-v2.2.1" for 8974 v2 and later.
-
-- reg:            Should contain base register location and length
-- interrupts:     Interrupt number used by this controller
-
-- clocks:         Should contain the core clock and the AHB clock.
-- clock-names:    Should be "core" for the core clock and "iface" for the
-                  AHB clock.
-
-- #address-cells: Number of cells required to define a chip select
-                  address on the SPI bus. Should be set to 1.
-- #size-cells:    Should be zero.
-
-Optional properties:
-- spi-max-frequency: Specifies maximum SPI clock frequency,
-                     Units - Hz. Definition as per
-                     Documentation/devicetree/bindings/spi/spi-bus.txt
-- num-cs:	total number of chipselects
-- cs-gpios:	should specify GPIOs used for chipselects.
-		The gpios will be referred to as reg = <index> in the SPI child
-		nodes.  If unspecified, a single SPI device without a chip
-		select can be used.
-
-- dmas:         Two DMA channel specifiers following the convention outlined
-                in bindings/dma/dma.txt
-- dma-names:    Names for the dma channels, if present. There must be at
-                least one channel named "tx" for transmit and named "rx" for
-                receive.
-
-SPI slave nodes must be children of the SPI master node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
-	spi_8: spi@f9964000 { /* BLSP2 QUP2 */
-
-		compatible = "qcom,spi-qup-v2";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xf9964000 0x1000>;
-		interrupts = <0 102 0>;
-		spi-max-frequency = <19200000>;
-
-		clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-		clock-names = "core", "iface";
-
-		dmas = <&blsp1_bam 13>, <&blsp1_bam 12>;
-		dma-names = "rx", "tx";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi8_default>;
-
-		device@0 {
-			compatible = "arm,pl022-dummy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0>; /* Chip select 0 */
-			spi-max-frequency = <19200000>;
-			spi-cpol;
-		};
-
-		device@1 {
-			compatible = "arm,pl022-dummy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <1>; /* Chip select 1 */
-			spi-max-frequency = <9600000>;
-			spi-cpha;
-		};
-
-		device@2 {
-			compatible = "arm,pl022-dummy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <2>; /* Chip select 2 */
-			spi-max-frequency = <19200000>;
-			spi-cpol;
-			spi-cpha;
-		};
-
-		device@3 {
-			compatible = "arm,pl022-dummy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <3>; /* Chip select 3 */
-			spi-max-frequency = <19200000>;
-			spi-cpol;
-			spi-cpha;
-			spi-cs-high;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml
new file mode 100644
index 000000000000..93f14dd01afc
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-qup.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The QUP core is an AHB slave that provides a common data path (an output FIFO
+  and an input FIFO) for serial peripheral interface (SPI) mini-core.
+
+  SPI in master mode supports up to 50MHz, up to four chip selects,
+  programmable data path from 4 bits to 32 bits and numerous protocol variants.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,spi-qup-v1.1.1 # for 8660, 8960 and 8064
+      - qcom,spi-qup-v2.1.1 # for 8974 and later
+      - qcom,spi-qup-v2.2.1 # for 8974 v2 and later
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@7575000 {
+        compatible = "qcom,spi-qup-v2.2.1";
+        reg = <0x07575000 0x600>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+                 <&gcc GCC_BLSP1_AHB_CLK>;
+        clock-names = "core", "iface";
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&blsp1_spi1_default>;
+        pinctrl-1 = <&blsp1_spi1_sleep>;
+        dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/ralink,mt7621-spi.yaml b/Documentation/devicetree/bindings/spi/ralink,mt7621-spi.yaml
new file mode 100644
index 000000000000..22879f7dcb77
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/ralink,mt7621-spi.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/ralink,mt7621-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+title: Mediatek MT7621/MT7628 SPI controller
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: ralink,mt7621-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: spi
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: spi
+
+required:
+  - compatible
+  - reg
+  - resets
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7621-clk.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    spi@b00 {
+      compatible = "ralink,mt7621-spi";
+      reg = <0xb00 0x100>;
+      clocks = <&sysc MT7621_CLK_SPI>;
+      clock-names = "spi";
+      resets = <&sysc MT7621_RST_SPI>;
+      reset-names = "spi";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pinctrl-names = "default";
+      pinctrl-0 = <&spi_pins>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml b/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
new file mode 100644
index 000000000000..2f938c293f70
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/realtek,rtl-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL838x/RTL839x SPI controller
+
+maintainers:
+  - Bert Vermeulen <bert@biot.com>
+  - Birger Koblitz <mail@birger-koblitz.de>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtl8380-spi
+      - realtek,rtl8382-spi
+      - realtek,rtl8391-spi
+      - realtek,rtl8392-spi
+      - realtek,rtl8393-spi
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi: spi@1200 {
+        compatible = "realtek,rtl8382-spi";
+        reg = <0x1200 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
index c429cf4bea5b..bab5d4b7fc3d 100644
--- a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
@@ -16,8 +16,8 @@ properties:
   compatible:
     items:
       - enum:
-        - renesas,hspi-r8a7778 # R-Car M1A
-        - renesas,hspi-r8a7779 # R-Car H1
+          - renesas,hspi-r8a7778 # R-Car M1A
+          - renesas,hspi-r8a7779 # R-Car H1
       - const: renesas,hspi
 
   reg:
@@ -40,6 +40,8 @@ required:
   - '#address-cells'
   - '#size-cells'
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/r8a7778-clock.h>
@@ -54,4 +56,3 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
     };
-
diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
new file mode 100644
index 000000000000..f45d3b75d6de
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,rspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas (Quad) Serial Peripheral Interface (RSPI/QSPI)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,rspi-sh7757    # SH7757
+          - const: renesas,rspi        # Legacy SH
+
+      - items:
+          - enum:
+              - renesas,rspi-r7s72100  # RZ/A1H
+              - renesas,rspi-r7s9210   # RZ/A2
+              - renesas,r9a07g043-rspi # RZ/G2UL
+              - renesas,r9a07g044-rspi # RZ/G2{L,LC}
+              - renesas,r9a07g054-rspi # RZ/V2L
+          - const: renesas,rspi-rz
+
+      - items:
+          - enum:
+              - renesas,qspi-r8a7742   # RZ/G1H
+              - renesas,qspi-r8a7743   # RZ/G1M
+              - renesas,qspi-r8a7744   # RZ/G1N
+              - renesas,qspi-r8a7745   # RZ/G1E
+              - renesas,qspi-r8a77470  # RZ/G1C
+              - renesas,qspi-r8a7790   # R-Car H2
+              - renesas,qspi-r8a7791   # R-Car M2-W
+              - renesas,qspi-r8a7792   # R-Car V2H
+              - renesas,qspi-r8a7793   # R-Car M2-N
+              - renesas,qspi-r8a7794   # R-Car E2
+          - const: renesas,qspi        # R-Car Gen2 and RZ/G1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    oneOf:
+      - items:
+          - description: A combined interrupt
+      - items:
+          - description: Error interrupt (SPEI)
+          - description: Receive Interrupt (SPRI)
+          - description: Transmit Interrupt (SPTI)
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: mux
+      - items:
+          - const: error
+          - const: rx
+          - const: tx
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+  num-cs:
+    description: |
+      Total number of native chip selects.
+      Hardware limitations related to chip selects:
+        - When using GPIO chip selects, at least one native chip select must
+          be left unused, as it will be driven anyway.
+    minimum: 1
+    maximum: 2
+    default: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rspi-rz
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+      required:
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,qspi
+              - renesas,r9a07g043-rspi
+              - renesas,r9a07g044-rspi
+              - renesas,r9a07g054-rspi
+    then:
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    qspi: spi@e6b10000 {
+            compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+            reg = <0xe6b10000 0x2c>;
+            interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 917>;
+            dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>;
+            dma-names = "tx", "rx", "tx", "rx";
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 917>;
+            num-cs = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt b/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt
deleted file mode 100644
index fb1a6728638d..000000000000
--- a/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-Renesas RZ/N1 SPI Controller
-
-This controller is based on the Synopsys DW Synchronous Serial Interface and
-inherits all properties defined in snps,dw-apb-ssi.txt except for the
-compatible property.
-
-Required properties:
-- compatible : The device specific string followed by the generic RZ/N1 string.
-   Therefore it must be one of:
-   "renesas,r9a06g032-spi", "renesas,rzn1-spi"
-   "renesas,r9a06g033-spi", "renesas,rzn1-spi"
diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
index b6c1dd2a9c5e..491a695a2deb 100644
--- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
@@ -21,6 +21,7 @@ properties:
                                             # device
       - items:
           - enum:
+              - renesas,msiof-r8a7742       # RZ/G1H
               - renesas,msiof-r8a7743       # RZ/G1M
               - renesas,msiof-r8a7744       # RZ/G1N
               - renesas,msiof-r8a7745       # RZ/G1E
@@ -37,8 +38,10 @@ properties:
               - renesas,msiof-r8a774a1      # RZ/G2M
               - renesas,msiof-r8a774b1      # RZ/G2N
               - renesas,msiof-r8a774c0      # RZ/G2E
+              - renesas,msiof-r8a774e1      # RZ/G2H
               - renesas,msiof-r8a7795       # R-Car H3
               - renesas,msiof-r8a7796       # R-Car M3-W
+              - renesas,msiof-r8a77961      # R-Car M3-W+
               - renesas,msiof-r8a77965      # R-Car M3-N
               - renesas,msiof-r8a77970      # R-Car V3M
               - renesas,msiof-r8a77980      # R-Car V3H
@@ -47,6 +50,13 @@ properties:
           - const: renesas,rcar-gen3-msiof  # generic R-Car Gen3 and RZ/G2
                                             # compatible device
       - items:
+          - enum:
+              - renesas,msiof-r8a779a0      # R-Car V3U
+              - renesas,msiof-r8a779f0      # R-Car S4-8
+              - renesas,msiof-r8a779g0      # R-Car V4H
+          - const: renesas,rcar-gen4-msiof  # generic R-Car Gen4
+                                            # compatible device
+      - items:
           - const: renesas,sh-msiof  # deprecated
 
   reg:
@@ -65,6 +75,12 @@ properties:
   clocks:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
   num-cs:
     description: |
       Total number of chip selects (default is 1).
@@ -96,43 +112,37 @@ properties:
 
   renesas,dtdl:
     description: delay sync signal (setup) in transmit mode.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum:
-          - 0    # no bit delay
-          - 50   # 0.5-clock-cycle delay
-          - 100  # 1-clock-cycle delay
-          - 150  # 1.5-clock-cycle delay
-          - 200  # 2-clock-cycle delay
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0        # no bit delay
+      - 50       # 0.5-clock-cycle delay
+      - 100      # 1-clock-cycle delay
+      - 150      # 1.5-clock-cycle delay
+      - 200      # 2-clock-cycle delay
 
   renesas,syncdl:
     description: delay sync signal (hold) in transmit mode
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum:
-          - 0    # no bit delay
-          - 50   # 0.5-clock-cycle delay
-          - 100  # 1-clock-cycle delay
-          - 150  # 1.5-clock-cycle delay
-          - 200  # 2-clock-cycle delay
-          - 300  # 3-clock-cycle delay
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0        # no bit delay
+      - 50       # 0.5-clock-cycle delay
+      - 100      # 1-clock-cycle delay
+      - 150      # 1.5-clock-cycle delay
+      - 200      # 2-clock-cycle delay
+      - 300      # 3-clock-cycle delay
 
   renesas,tx-fifo-size:
     # deprecated for soctype-specific bindings
     description: |
       Override the default TX fifo size.  Unit is words.  Ignored if 0.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 64
 
   renesas,rx-fifo-size:
     # deprecated for soctype-specific bindings
     description: |
       Override the default RX fifo size.  Unit is words.  Ignored if 0.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 64
 
 required:
@@ -142,6 +152,8 @@ required:
   - '#address-cells'
   - '#size-cells'
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/r8a7791-clock.h>
@@ -149,7 +161,7 @@ examples:
 
     msiof0: spi@e6e20000 {
         compatible = "renesas,msiof-r8a7791", "renesas,rcar-gen2-msiof";
-        reg = <0 0xe6e20000 0 0x0064>;
+        reg = <0xe6e20000 0x0064>;
         interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
         dmas = <&dmac0 0x51>, <&dmac0 0x52>;
diff --git a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
new file mode 100644
index 000000000000..339fb39529f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Serial Flash Controller (SFC)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: rockchip,sfc
+    description:
+      The rockchip sfc controller is a standalone IP with version register,
+      and the driver can handle all the feature difference inside the IP
+      depending on the version register.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: clk_sfc
+      - const: hclk_sfc
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,sfc-no-dma:
+    description: Disable DMA and utilize FIFO mode only
+    type: boolean
+
+patternProperties:
+  "^flash@[0-3]$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/px30-power.h>
+
+    sfc: spi@ff3a0000 {
+        compatible = "rockchip,sfc";
+        reg = <0xff3a0000 0x4000>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+        clock-names = "clk_sfc", "hclk_sfc";
+        pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
+        pinctrl-names = "default";
+        power-domains = <&power PX30_PD_MMC_NAND>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <108000000>;
+            spi-rx-bus-width = <2>;
+            spi-tx-bus-width = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml
new file mode 100644
index 000000000000..25b1b6c12d4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/samsung,spi-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for Samsung S3C/S5P/Exynos SoC SPI controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  See spi-peripheral-props.yaml for more info.
+
+properties:
+  controller-data:
+    type: object
+    additionalProperties: false
+
+    properties:
+      samsung,spi-feedback-delay:
+        description: |
+          The sampling phase shift to be applied on the miso line (to account
+          for any lag in the miso line). Valid values:
+           - 0: No phase shift.
+           - 1: 90 degree phase shift sampling.
+           - 2: 180 degree phase shift sampling.
+           - 3: 270 degree phase shift sampling.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml
new file mode 100644
index 000000000000..e0a465d70b0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/samsung,spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC SPI controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  All the SPI controller nodes should be represented in the aliases node using
+  the following format 'spi{n}' where n is a unique number for the alias.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450
+          - samsung,s3c6410-spi
+          - samsung,s5pv210-spi # for S5PV210 and S5PC110
+          - samsung,exynos4210-spi
+          - samsung,exynos5433-spi
+          - samsung,exynosautov9-spi
+          - tesla,fsd-spi
+      - const: samsung,exynos7-spi
+        deprecated: true
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  cs-gpios: true
+
+  dmas:
+    minItems: 2
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  no-cs-readback:
+    description:
+      The CS line is disconnected, therefore the device should not operate
+      based on CS signalling.
+    type: boolean
+
+  num-cs:
+    minimum: 1
+    maximum: 4
+    default: 1
+
+  samsung,spi-src-clk:
+    description:
+      If the spi controller includes a internal clock mux to select the clock
+      source for the spi bus clock, this property can be used to indicate the
+      clock to be used for driving the spi bus clock. If not specified, the
+      clock number 0 is used as default.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - interrupts
+  - reg
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-spi
+              - samsung,exynosautov9-spi
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: spi
+            - enum:
+                - spi_busclk0
+                - spi_busclk1
+                - spi_busclk2
+                - spi_busclk3
+            - const: spi_ioclk
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: spi
+            - enum:
+                - spi_busclk0
+                - spi_busclk1
+                - spi_busclk2
+                - spi_busclk3
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/clock/samsung,s2mps11.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi@14d30000 {
+        compatible = "samsung,exynos5433-spi";
+        reg = <0x14d30000 0x100>;
+        interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&pdma0 11>, <&pdma0 10>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&cmu_peric CLK_PCLK_SPI1>,
+                 <&cmu_peric CLK_SCLK_SPI1>,
+                 <&cmu_peric CLK_SCLK_IOCLK_SPI1>;
+        clock-names = "spi",
+                      "spi_busclk0",
+                      "spi_ioclk";
+        samsung,spi-src-clk = <0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&spi1_bus>;
+        num-cs = <1>;
+
+        cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+
+        audio-codec@0 {
+            compatible = "wlf,wm5110";
+            reg = <0x0>;
+            spi-max-frequency = <20000000>;
+            interrupt-parent = <&gpa0>;
+            interrupts = <4 IRQ_TYPE_NONE>;
+            clocks = <&pmu_system_controller 0>,
+                     <&s2mps13_osc S2MPS11_CLK_BT>;
+            clock-names = "mclk1", "mclk2";
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+
+            wlf,micd-detect-debounce = <300>;
+            wlf,micd-bias-start-time = <0x1>;
+            wlf,micd-rate = <0x7>;
+            wlf,micd-dbtime = <0x2>;
+            wlf,micd-force-micbias;
+            wlf,micd-configs = <0x0 1 0>;
+            wlf,hpdet-channel = <1>;
+            wlf,gpsw = <0x1>;
+            wlf,inmode = <2 0 2 0>;
+
+            wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+            wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+            /* core supplies */
+            AVDD-supply = <&ldo18_reg>;
+            DBVDD1-supply = <&ldo18_reg>;
+            CPVDD-supply = <&ldo18_reg>;
+            DBVDD2-supply = <&ldo18_reg>;
+            DBVDD3-supply = <&ldo18_reg>;
+            SPKVDDL-supply = <&ldo18_reg>;
+            SPKVDDR-supply = <&ldo18_reg>;
+
+            controller-data {
+                samsung,spi-feedback-delay = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
deleted file mode 100644
index 3ed08ee9feba..000000000000
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
-
-Required properties:
-- compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi", where soc is "ocelot" or
-  "jaguar2", or "amazon,alpine-dw-apb-ssi"
-- reg : The register base for the controller. For "mscc,<soc>-spi", a second
-  register set is required (named ICPU_CFG:SPI_MST)
-- interrupts : One interrupt, used by the controller.
-- #address-cells : <1>, as required by generic SPI binding.
-- #size-cells : <0>, also as required by generic SPI binding.
-- clocks : phandles for the clocks, see the description of clock-names below.
-   The phandle for the "ssi_clk" is required. The phandle for the "pclk" clock
-   is optional. If a single clock is specified but no clock-name, it is the
-   "ssi_clk" clock. If both clocks are listed, the "ssi_clk" must be first.
-
-Optional properties:
-- clock-names : Contains the names of the clocks:
-    "ssi_clk", for the core clock used to generate the external SPI clock.
-    "pclk", the interface clock, required for register access. If a clock domain
-     used to enable this clock then it should be named "pclk_clkdomain".
-- cs-gpios : Specifies the gpio pins to be used for chipselects.
-- num-cs : The number of chipselects. If omitted, this will default to 4.
-- reg-io-width : The I/O register width (in bytes) implemented by this
-  device.  Supported values are 2 or 4 (the default).
-
-Child nodes as per the generic SPI binding.
-
-Example:
-
-	spi@fff00000 {
-		compatible = "snps,dw-apb-ssi";
-		reg = <0xfff00000 0x1000>;
-		interrupts = <0 154 4>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&spi_m_clk>;
-		num-cs = <2>;
-		cs-gpios = <&gpio0 13 0>,
-			   <&gpio0 14 0>;
-	};
-
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
new file mode 100644
index 000000000000..d33b72fabc5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/snps,dw-apb-ssi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mscc,ocelot-spi
+              - mscc,jaguar2-spi
+    then:
+      properties:
+        reg:
+          minItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - baikal,bt1-sys-ssi
+    then:
+      properties:
+        mux-controls:
+          maxItems: 1
+      required:
+        - mux-controls
+    else:
+      required:
+        - interrupts
+
+properties:
+  compatible:
+    oneOf:
+      - description: Generic DW SPI Controller
+        enum:
+          - snps,dw-apb-ssi
+          - snps,dwc-ssi-1.01a
+      - description: Microsemi Ocelot/Jaguar2 SoC SPI Controller
+        items:
+          - enum:
+              - mscc,ocelot-spi
+              - mscc,jaguar2-spi
+          - const: snps,dw-apb-ssi
+      - description: Microchip Sparx5 SoC SPI Controller
+        const: microchip,sparx5-spi
+      - description: Amazon Alpine SPI Controller
+        const: amazon,alpine-dw-apb-ssi
+      - description: Renesas RZ/N1 SPI Controller
+        items:
+          - const: renesas,rzn1-spi
+          - const: snps,dw-apb-ssi
+      - description: Intel Keem Bay SPI Controller
+        const: intel,keembay-ssi
+      - description: Intel Thunder Bay SPI Controller
+        const: intel,thunderbay-ssi
+      - description: Baikal-T1 SPI Controller
+        const: baikal,bt1-ssi
+      - description: Baikal-T1 System Boot SPI Controller
+        const: baikal,bt1-sys-ssi
+      - description: Canaan Kendryte K210 SoS SPI Controller
+        const: canaan,k210-spi
+      - description: Renesas RZ/N1 SPI Controller
+        items:
+          - enum:
+              - renesas,r9a06g032-spi # RZ/N1D
+              - renesas,r9a06g033-spi # RZ/N1S
+          - const: renesas,rzn1-spi   # RZ/N1
+
+  reg:
+    minItems: 1
+    items:
+      - description: DW APB SSI controller memory mapped registers
+      - description: SPI MST region map or directly mapped SPI ROM
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: SPI Controller reference clock source
+      - description: APB interface clock source
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ssi_clk
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: spi
+
+  reg-io-width:
+    description: I/O register width (in bytes) implemented by this device
+    default: 4
+    enum: [ 2, 4 ]
+
+  num-cs:
+    default: 4
+    minimum: 1
+    maximum: 4
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  rx-sample-delay-ns:
+    default: 0
+    description: |
+      Default value of the rx-sample-delay-ns property.
+      This value will be used if the property is not explicitly defined
+      for a SPI slave device.
+
+      SPI Rx sample delay offset, unit is nanoseconds.
+      The delay from the default sample time before the actual sample of the
+      rxd input signal occurs. The "rx_sample_delay" is an optional feature
+      of the designware controller, and the upper limit is also subject to
+      controller configuration.
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+
+examples:
+  - |
+    spi@fff00000 {
+      compatible = "snps,dw-apb-ssi";
+      reg = <0xfff00000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <0 154 4>;
+      clocks = <&spi_m_clk>;
+      num-cs = <2>;
+      cs-gpios = <&gpio0 13 0>,
+                 <&gpio0 14 0>;
+      rx-sample-delay-ns = <3>;
+      flash@1 {
+        compatible = "spi-nand";
+        reg = <1>;
+        rx-sample-delay-ns = <7>;
+      };
+    };
+  - |
+    spi@1f040100 {
+      compatible = "baikal,bt1-sys-ssi";
+      reg = <0x1f040100 0x900>,
+            <0x1c000000 0x1000000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mux-controls = <&boot_mux>;
+      clocks = <&ccu_sys>;
+      clock-names = "ssi_clk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
new file mode 100644
index 000000000000..597fc4e6b01c
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/socionext,uniphier-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SPI controller
+
+description: |
+  UniPhier SoCs have SCSSI which supports SPI single channel.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+  - Keiji Hayashibara <hayashibara.keiji@socionext.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  "#address-cells": true
+  "#size-cells": true
+
+  compatible:
+    const: socionext,uniphier-scssi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi0: spi@54006000 {
+        compatible = "socionext,uniphier-scssi";
+        reg = <0x54006000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <0 39 4>;
+        clocks = <&peri_clk 11>;
+        resets = <&peri_rst 11>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt
deleted file mode 100644
index 05a2ef945664..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-cadence.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Cadence SPI controller Device Tree Bindings
--------------------------------------------
-
-Required properties:
-- compatible		: Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6".
-- reg			: Physical base address and size of SPI registers map.
-- interrupts		: Property with a value describing the interrupt
-			  number.
-- clock-names		: List of input clock names - "ref_clk", "pclk"
-			  (See clock bindings for details).
-- clocks		: Clock phandles (see clock bindings for details).
-
-Optional properties:
-- num-cs		: Number of chip selects used.
-			  If a decoder is used, this will be the number of
-			  chip selects after the decoder.
-- is-decoded-cs		: Flag to indicate whether decoder is used or not.
-
-Example:
-
-	spi@e0007000 {
-		compatible = "xlnx,zynq-spi-r1p6";
-		clock-names = "ref_clk", "pclk";
-		clocks = <&clkc 26>, <&clkc 35>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 49 4>;
-		num-cs = <4>;
-		is-decoded-cs = <0>;
-		reg = <0xe0007000 0x1000>;
-	} ;
diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
new file mode 100644
index 000000000000..64bf4e621142
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-cadence.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence SPI controller
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - cdns,spi-r1p6
+      - xlnx,zynq-spi-r1p6
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: pclk
+
+  clocks:
+    maxItems: 2
+
+  num-cs:
+    description: |
+      Number of chip selects used. If a decoder is used,
+      this will be the number of chip selects after the
+      decoder.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+    default: 4
+
+  is-decoded-cs:
+    description: |
+      Flag to indicate whether decoder is used or not.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@e0007000 {
+      compatible = "xlnx,zynq-spi-r1p6";
+      clock-names = "ref_clk", "pclk";
+      clocks = <&clkc 26>, <&clkc 35>;
+      interrupt-parent = <&intc>;
+      interrupts = <0 49 4>;
+      num-cs = <4>;
+      is-decoded-cs = <0>;
+      reg = <0xe0007000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 1e0ca6ccf64b..01042a7f382e 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -20,7 +20,7 @@ properties:
     pattern: "^spi(@.*|-[0-9a-f])*$"
 
   "#address-cells":
-    const: 1
+    enum: [0, 1]
 
   "#size-cells":
     const: 0
@@ -42,6 +42,33 @@ properties:
         cs2 : &gpio1 1 0
         cs3 : &gpio1 2 0
 
+      The second flag of a gpio descriptor can be GPIO_ACTIVE_HIGH (0)
+      or GPIO_ACTIVE_LOW(1). Legacy device trees often use 0.
+
+      There is a special rule set for combining the second flag of an
+      cs-gpio with the optional spi-cs-high flag for SPI slaves.
+
+      Each table entry defines how the CS pin is to be physically
+      driven (not considering potential gpio inversions by pinmux):
+
+      device node     | cs-gpio       | CS pin state active | Note
+      ================+===============+=====================+=====
+      spi-cs-high     | -             | H                   |
+      -               | -             | L                   |
+      spi-cs-high     | ACTIVE_HIGH   | H                   |
+      -               | ACTIVE_HIGH   | L                   | 1
+      spi-cs-high     | ACTIVE_LOW    | H                   | 2
+      -               | ACTIVE_LOW    | L                   |
+
+      Notes:
+      1) Should print a warning about polarity inversion.
+         Here it would be wise to avoid and define the gpio as
+         ACTIVE_LOW.
+      2) Should print a warning about polarity inversion
+         because ACTIVE_LOW is overridden by spi-cs-high.
+         Should be generally avoided and be replaced by
+         spi-cs-high + ACTIVE_HIGH.
+
   num-cs:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -52,8 +79,7 @@ properties:
     description:
       The SPI controller acts as a slave, instead of a master.
 
-patternProperties:
-  "^slave$":
+  slave:
     type: object
 
     properties:
@@ -64,20 +90,12 @@ patternProperties:
     required:
       - compatible
 
+patternProperties:
   "^.*@[0-9a-f]+$":
     type: object
+    $ref: spi-peripheral-props.yaml
 
     properties:
-      compatible:
-        description:
-          Compatible of the SPI device.
-
-      reg:
-        minimum: 0
-        maximum: 256
-        description:
-          Chip select used by the device.
-
       spi-3wire:
         $ref: /schemas/types.yaml#/definitions/flag
         description:
@@ -93,68 +111,53 @@ patternProperties:
         description:
           The device requires inverse clock polarity (CPOL) mode.
 
-      spi-cs-high:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          The device requires the chip select active high.
-
-      spi-lsb-first:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          The device requires the LSB first mode.
-
-      spi-max-frequency:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description:
-          Maximum SPI clocking speed of the device in Hz.
-
-      spi-rx-bus-width:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 1, 2, 4, 8 ]
-          - default: 1
-        description:
-          Bus width to the SPI bus used for MISO.
-
-      spi-rx-delay-us:
-        description:
-          Delay, in microseconds, after a read transfer.
-
-      spi-tx-bus-width:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 1, 2, 4, 8 ]
-          - default: 1
-        description:
-          Bus width to the SPI bus used for MOSI.
-
-      spi-tx-delay-us:
-        description:
-          Delay, in microseconds, after a write transfer.
-
     required:
       - compatible
       - reg
 
+allOf:
+  - if:
+      not:
+        required:
+          - spi-slave
+    then:
+      properties:
+        "#address-cells":
+          const: 1
+    else:
+      properties:
+        "#address-cells":
+          const: 0
+
+additionalProperties: true
+
 examples:
   - |
-    spi@f00 {
+    spi@80010000 {
         #address-cells = <1>;
         #size-cells = <0>;
-        compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-        reg = <0xf00 0x20>;
-        interrupts = <2 13 0 2 14 0>;
-        interrupt-parent = <&mpc5200_pic>;
-
-        ethernet-switch@0 {
-            compatible = "micrel,ks8995m";
+        compatible = "fsl,imx28-spi";
+        reg = <0x80010000 0x2000>;
+        interrupts = <96>;
+        dmas = <&dma_apbh 0>;
+        dma-names = "rx-tx";
+
+        display@0 {
+            compatible = "lg,lg4573";
             spi-max-frequency = <1000000>;
             reg = <0>;
         };
 
-        codec@1 {
-            compatible = "ti,tlv320aic26";
+        sensor@1 {
+            compatible = "bosch,bme680";
             spi-max-frequency = <100000>;
             reg = <1>;
         };
+
+        flash@2 {
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            reg = <2>, <3>;
+            stacked-memories = /bits/ 64 <0x10000000 0x10000000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 9f5b4c7c0c08..f012888656ec 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -1,8 +1,8 @@
 Davinci SPI controller device bindings
 
 Links on DM:
-Keystone 2 - http://www.ti.com/lit/ug/sprugp2a/sprugp2a.pdf
-dm644x - http://www.ti.com/lit/ug/sprue32a/sprue32a.pdf
+Keystone 2 - https://www.ti.com/lit/ug/sprugp2a/sprugp2a.pdf
+dm644x - https://www.ti.com/lit/ug/sprue32a/sprue32a.pdf
 OMAP-L138/da830 - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
 
 Required properties:
@@ -25,7 +25,7 @@ Required properties:
 - interrupts: interrupt number mapped to CPU.
 - clocks: spi clk phandle
           For 66AK2G this property should be set per binding,
-          Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+          Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
 
 SoC-specific Required Properties:
 
@@ -78,7 +78,7 @@ spi0:spi@20bf0000 {
 	interrupts			= <338>;
 	clocks				= <&clkspi>;
 
-	flash: n25q032@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32";
diff --git a/Documentation/devicetree/bindings/spi/spi-dw.txt b/Documentation/devicetree/bindings/spi/spi-dw.txt
deleted file mode 100644
index 7b63ed601990..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-dw.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Synopsys DesignWare SPI master
-
-Required properties:
-- compatible: should be "snps,designware-spi"
-- #address-cells: see spi-bus.txt
-- #size-cells: see spi-bus.txt
-- reg: address and length of the spi master registers
-- interrupts: should contain one interrupt
-- clocks: spi clock phandle
-- num-cs: see spi-bus.txt
-
-Optional properties:
-- cs-gpios: see spi-bus.txt
-
-Example:
-
-spi: spi@4020a000 {
-	compatible = "snps,designware-spi";
-	interrupts = <11 1>;
-	reg = <0x4020a000 0x1000>;
-	clocks = <&pclk>;
-	num-cs = <2>;
-	cs-gpios = <&banka 0 0>;
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index 162e024b95a0..30a79da9c039 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -1,12 +1,17 @@
 ARM Freescale DSPI controller
 
 Required properties:
-- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi",
-		"fsl,ls2085a-dspi"
-		or
-		"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"
-		"fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi"
-		"fsl,ls1088a-dspi" followed by "fsl,ls1021a-v1.0-dspi"
+- compatible : must be one of:
+	"fsl,vf610-dspi",
+	"fsl,ls1021a-v1.0-dspi",
+	"fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+	"fsl,ls1028a-dspi",
+	"fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+	"fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+	"fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+	"fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"),
+	"fsl,ls2085a-dspi",
+	"fsl,lx2160a-dspi",
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
 - clocks: from common clock binding: handle to dspi clock.
@@ -14,11 +19,11 @@ Required properties:
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must contain a "default" entry.
 - spi-num-chipselects : the number of the chipselect signals.
-- bus-num : the slave chip chipselect signal number.
 
 Optional property:
 - big-endian: If present the dspi device's registers are implemented
   in big endian mode.
+- bus-num : the slave chip chipselect signal number.
 
 Optional SPI slave node properties:
 - fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
deleted file mode 100644
index e71b81a41ac0..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Freescale Low Power SPI (LPSPI) for i.MX
-
-Required properties:
-- compatible :
-  - "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc
-  - "fsl,imx8qxp-spi" for LPSPI compatible with the one integrated on i.MX8QXP soc
-- reg : address and length of the lpspi master registers
-- interrupt-parent : core interrupt controller
-- interrupts : lpspi interrupt
-- clocks : lpspi clock specifier. Its number and order need to correspond to the
-	   value in clock-names.
-- clock-names : Corresponding to per clock and ipg clock in "clocks"
-		respectively. In i.MX7ULP, it only has per clk, so use CLK_DUMMY
-		to fill the "ipg" blank.
-- spi-slave : spi slave mode support. In slave mode, add this attribute without
-	      value. In master mode, remove it.
-
-Examples:
-
-lpspi2: lpspi@40290000 {
-	compatible = "fsl,imx7ulp-spi";
-	reg = <0x40290000 0x10000>;
-	interrupt-parent = <&intc>;
-	interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks IMX7ULP_CLK_LPSPI2>,
-		 <&clks IMX7ULP_CLK_DUMMY>;
-	clock-names = "per", "ipg";
-	spi-slave;
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
new file mode 100644
index 000000000000..8b44284d30c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-fsl-lpspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Low Power SPI (LPSPI) for i.MX
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx7ulp-spi
+          - fsl,imx8qxp-spi
+      - items:
+          - enum:
+              - fsl,imx8ulp-spi
+              - fsl,imx93-spi
+          - const: fsl,imx7ulp-spi
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC SPI per clock
+      - description: SoC SPI ipg clock
+
+  clock-names:
+    items:
+      - const: per
+      - const: ipg
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  fsl,spi-only-use-cs1-sel:
+    description:
+      spi common code does not support use of CS signals discontinuously.
+      i.MX8DXL-EVK board only uses CS1 without using CS0. Therefore, add
+      this property to re-config the chipselect value in the LPSPI driver.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@40290000 {
+        compatible = "fsl,imx7ulp-spi";
+        reg = <0x40290000 0x10000>;
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX7ULP_CLK_LPSPI2>,
+                 <&clks IMX7ULP_CLK_DUMMY>;
+        clock-names = "per", "ipg";
+        spi-slave;
+        fsl,spi-only-use-cs1-sel;
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
deleted file mode 100644
index 69dc5d57b1ef..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* Freescale Quad Serial Peripheral Interface(QuadSPI)
-
-Required properties:
-  - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
-		 "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
-		 "fsl,ls1021a-qspi", "fsl,ls2080a-qspi"
-		 or
-		 "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi"
-  - reg : the first contains the register location and length,
-          the second contains the memory mapping address and length
-  - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
-  - interrupts : Should contain the interrupt for the device
-  - clocks : The clocks needed by the QuadSPI controller
-  - clock-names : Should contain the name of the clocks: "qspi_en" and "qspi".
-
-Required SPI slave node properties:
-  - reg: There are two buses (A and B) with two chip selects each.
-	 This encodes to which bus and CS the flash is connected:
-		<0>: Bus A, CS 0
-		<1>: Bus A, CS 1
-		<2>: Bus B, CS 0
-		<3>: Bus B, CS 1
-
-Example:
-
-qspi0: quadspi@40044000 {
-	compatible = "fsl,vf610-qspi";
-	reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
-	reg-names = "QuadSPI", "QuadSPI-memory";
-	interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks VF610_CLK_QSPI0_EN>,
-		<&clks VF610_CLK_QSPI0>;
-	clock-names = "qspi_en", "qspi";
-
-	flash0: s25fl128s@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl128s", "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-	};
-};
-
-Example showing the usage of two SPI NOR devices on bus A:
-
-&qspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi2>;
-	status = "okay";
-
-	flash0: n25q256a@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q256a", "jedec,spi-nor";
-		spi-max-frequency = <29000000>;
-		reg = <0>;
-	};
-
-	flash1: n25q256a@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q256a", "jedec,spi-nor";
-		spi-max-frequency = <29000000>;
-		reg = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.yaml b/Documentation/devicetree/bindings/spi/spi-gpio.yaml
index 55c4f1705f07..0d0b6d9dad1c 100644
--- a/Documentation/devicetree/bindings/spi/spi-gpio.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-gpio.yaml
@@ -53,6 +53,8 @@ required:
   - num-chipselects
   - sck-gpios
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
index ce3230c8e28d..76a3dd35f796 100644
--- a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
@@ -1,11 +1,17 @@
 Lantiq Synchronous Serial Controller (SSC) SPI master driver
 
 Required properties:
-- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi"
+- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi",
+  "intel,lgm-spi"
 - #address-cells: see spi-bus.txt
 - #size-cells: see spi-bus.txt
 - reg: address and length of the spi master registers
-- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt.
+- interrupts:
+  For compatible "intel,lgm-ssc" - the common interrupt number for
+  all of tx rx & err interrupts.
+       or
+  For rest of the compatibles, should contain the "spi_rx", "spi_tx" and
+  "spi_err" interrupt.
 
 
 Optional properties:
@@ -27,3 +33,14 @@ spi: spi@e100800 {
 	num-cs = <6>;
 	base-cs = <1>;
 };
+
+ssc0: spi@e0800000 {
+	compatible = "intel,lgm-spi";
+	reg = <0xe0800000 0x400>;
+	interrupt-parent = <&ioapic1>;
+	interrupts = <35 1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clocks = <&cgu0 LGM_CLK_NGI>, <&cgu0 LGM_GCLK_SSC0>;
+	clock-names = "freq", "gate";
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
deleted file mode 100644
index 3a8079eb18c8..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Binding for MTK SPI controller
-
-Required properties:
-- compatible: should be one of the following.
-    - mediatek,mt2701-spi: for mt2701 platforms
-    - mediatek,mt2712-spi: for mt2712 platforms
-    - mediatek,mt6589-spi: for mt6589 platforms
-    - mediatek,mt6765-spi: for mt6765 platforms
-    - mediatek,mt7622-spi: for mt7622 platforms
-    - "mediatek,mt7629-spi", "mediatek,mt7622-spi": for mt7629 platforms
-    - mediatek,mt8135-spi: for mt8135 platforms
-    - mediatek,mt8173-spi: for mt8173 platforms
-    - mediatek,mt8183-spi: for mt8183 platforms
-    - "mediatek,mt8516-spi", "mediatek,mt2712-spi": for mt8516 platforms
-
-- #address-cells: should be 1.
-
-- #size-cells: should be 0.
-
-- reg: Address and length of the register set for the device
-
-- interrupts: Should contain spi interrupt
-
-- clocks: phandles to input clocks.
-  The first should be one of the following. It's PLL.
-   -  <&clk26m>: specify parent clock 26MHZ.
-   -  <&topckgen CLK_TOP_SYSPLL3_D2>: specify parent clock 109MHZ.
-				      It's the default one.
-   -  <&topckgen CLK_TOP_SYSPLL4_D2>: specify parent clock 78MHZ.
-   -  <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
-   -  <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
-  The second should be <&topckgen CLK_TOP_SPI_SEL>. It's clock mux.
-  The third is <&pericfg CLK_PERI_SPI0>. It's clock gate.
-
-- clock-names: shall be "parent-clk" for the parent clock, "sel-clk" for the
-  muxes clock, and "spi-clk" for the clock gate.
-
-Optional properties:
--cs-gpios: see spi-bus.txt.
-
-- mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
-  controller used. This is an array, the element value should be 0~3,
-  only required for MT8173.
-    0: specify GPIO69,70,71,72 for spi pins.
-    1: specify GPIO102,103,104,105 for spi pins.
-    2: specify GPIO128,129,130,131 for spi pins.
-    3: specify GPIO5,6,7,8 for spi pins.
-
-Example:
-
-- SoC Specific Portion:
-spi: spi@1100a000 {
-	compatible = "mediatek,mt8173-spi";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0 0x1100a000 0 0x1000>;
-	interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-		 <&topckgen CLK_TOP_SPI_SEL>,
-		 <&pericfg CLK_PERI_SPI0>;
-	clock-names = "parent-clk", "sel-clk", "spi-clk";
-	cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>;
-	mediatek,pad-select = <1>, <0>;
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-mt7621.txt b/Documentation/devicetree/bindings/spi/spi-mt7621.txt
deleted file mode 100644
index d5baec0fa56e..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-mt7621.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Binding for MTK SPI controller (MT7621 MIPS)
-
-Required properties:
-- compatible: Should be one of the following:
-  - "ralink,mt7621-spi": for mt7621/mt7628/mt7688 platforms
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-- reg: Address and length of the register set for the device
-- resets: phandle to the reset controller asserting this device in
-          reset
-  See ../reset/reset.txt for details.
-
-Optional properties:
-- cs-gpios: see spi-bus.txt.
-
-Example:
-
-- SoC Specific Portion:
-spi0: spi@b00 {
-	compatible = "ralink,mt7621-spi";
-	reg = <0xb00 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	resets = <&rstctrl 18>;
-	reset-names = "spi";
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
new file mode 100644
index 000000000000..7ea79f6d33f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SPI Multiplexer
+
+description: |
+  This binding describes a SPI bus multiplexer to route the SPI chip select
+  signals. This can be used when you need more devices than the SPI controller
+  has chip selects available. An example setup is shown in ASCII art; the actual
+  setting of the multiplexer to a channel needs to be done by a specific SPI mux
+  driver.
+
+        MOSI /--------------------------------+--------+--------+--------\
+        MISO |/------------------------------+|-------+|-------+|-------\|
+         SCL ||/----------------------------+||------+||------+||------\||
+             |||                            |||      |||      |||      |||
+      +------------+                        |||      |||      |||      |||
+      | SoC  |||   |                      +-+++-+  +-+++-+  +-+++-+  +-+++-+
+      |      |||   |                      | dev |  | dev |  | dev |  | dev |
+      |   +--+++-+ | CS-X  +------+\      +--+--+  +--+--+  +--+--+  +--+--+
+      |   | SPI  +-|-------+ Mux  |\\   CS-0 |        |        |        |
+      |   +------+ |       +--+---+\\\-------/   CS-1 |        |        |
+      |            |          |    \\\----------------/   CS-2 |        |
+      |   +------+ |          |     \\-------------------------/   CS-3 |
+      |   | ?    +-|----------/      \----------------------------------/
+      |   +------+ |
+      +------------+
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: "/schemas/spi/spi-peripheral-props.yaml#"
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  compatible:
+    const: spi-mux
+
+  mux-controls:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - mux-controls
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    mux: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+    };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        spi@0 {
+            compatible = "spi-mux";
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            spi-max-frequency = <100000000>;
+
+            mux-controls = <&mux>;
+
+            flash@0 {
+                compatible = "jedec,spi-nor";
+                reg = <0>;
+                spi-max-frequency = <40000000>;
+            };
+
+            sensor@1 {
+                compatible = "bosch,bme680";
+                reg = <1>;
+                spi-max-frequency = <10000000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-mxic.txt b/Documentation/devicetree/bindings/spi/spi-mxic.txt
deleted file mode 100644
index 529f2dab2648..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-mxic.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Macronix SPI controller Device Tree Bindings
---------------------------------------------
-
-Required properties:
-- compatible: should be "mxicy,mx25f0a-spi"
-- #address-cells: should be 1
-- #size-cells: should be 0
-- reg: should contain 2 entries, one for the registers and one for the direct
-       mapping area
-- reg-names: should contain "regs" and "dirmap"
-- interrupts: interrupt line connected to the SPI controller
-- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
-- clocks: should contain 3 entries for the "ps_clk", "send_clk" and
-	  "send_dly_clk" clocks
-
-Example:
-
-	spi@43c30000 {
-		compatible = "mxicy,mx25f0a-spi";
-		reg = <0x43c30000 0x10000>, <0xa0000000 0x20000000>;
-		reg-names = "regs", "dirmap";
-		clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 18>;
-		clock-names = "send_clk", "send_dly_clk", "ps_clk";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		flash@0 {
-			compatible = "jedec,spi-nor";
-			reg = <0>;
-			spi-max-frequency = <25000000>;
-			spi-tx-bus-width = <4>;
-			spi-rx-bus-width = <4>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
deleted file mode 100644
index 2cd67eb727d4..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-* NXP Flex Serial Peripheral Interface (FSPI)
-
-Required properties:
-  - compatible : Should be "nxp,lx2160a-fspi"
-  - reg :        First contains the register location and length,
-                 Second contains the memory mapping address and length
-  - reg-names :  Should contain the resource reg names:
-	         - fspi_base: configuration register address space
-                 - fspi_mmap: memory mapped address space
-  - interrupts : Should contain the interrupt for the device
-
-Required SPI slave node properties:
-  - reg :        There are two buses (A and B) with two chip selects each.
-                 This encodes to which bus and CS the flash is connected:
-                 - <0>: Bus A, CS 0
-                 - <1>: Bus A, CS 1
-                 - <2>: Bus B, CS 0
-                 - <3>: Bus B, CS 1
-
-Example showing the usage of two SPI NOR slave devices on bus A:
-
-fspi0: spi@20c0000 {
-	compatible = "nxp,lx2160a-fspi";
-	reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>;
-	reg-names = "fspi_base", "fspi_mmap";
-	interrupts = <0 25 0x4>; /* Level high type */
-	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-	clock-names = "fspi_en", "fspi";
-
-	mt35xu512aba0: flash@0 {
-		reg = <0>;
-		....
-	};
-
-	mt35xu512aba1: flash@1 {
-		reg = <1>;
-		....
-	};
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
new file mode 100644
index 000000000000..1b552c298277
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-nxp-fspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Flex Serial Peripheral Interface (FSPI)
+
+maintainers:
+  - Han Xu <han.xu@nxp.com>
+  - Kuldeep Singh <singh.kuldeep87k@gmail.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - nxp,imx8dxl-fspi
+      - nxp,imx8mm-fspi
+      - nxp,imx8mp-fspi
+      - nxp,imx8qxp-fspi
+      - nxp,lx2160a-fspi
+
+  reg:
+    items:
+      - description: registers address space
+      - description: memory mapped address space
+
+  reg-names:
+    items:
+      - const: fspi_base
+      - const: fspi_mmap
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SPI bus clock
+      - description: SPI serial clock
+
+  clock-names:
+    items:
+      - const: fspi_en
+      - const: fspi
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        spi@20c0000 {
+            compatible = "nxp,lx2160a-fspi";
+            reg = <0x0 0x20c0000 0x0 0x100000>,
+                  <0x0 0x20000000 0x0 0x10000000>;
+            reg-names = "fspi_base", "fspi_mmap";
+            interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>,
+                     <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>;
+            clock-names = "fspi_en", "fspi";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            flash@0 {
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <50000000>;
+                reg = <0>;
+                spi-rx-bus-width = <8>;
+                spi-tx-bus-width = <8>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
new file mode 100644
index 000000000000..dca677f9e1b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for a SPI bus.
+
+description:
+  Many SPI controllers need to add properties to peripheral devices. They could
+  be common properties like spi-max-frequency, spi-cpha, etc. or they could be
+  controller specific like delay in clock or data lines, etc. These properties
+  need to be defined in the peripheral node because they are per-peripheral and
+  there can be multiple peripherals attached to a controller. All those
+  properties are listed here. The controller specific properties should go in
+  their own separate schema that should be referenced from here.
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+properties:
+  reg:
+    minItems: 1
+    maxItems: 256
+    items:
+      items:
+        - minimum: 0
+          maximum: 256
+    description:
+      Chip select used by the device.
+
+  spi-cs-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires the chip select active high.
+
+  spi-lsb-first:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires the LSB first mode.
+
+  spi-max-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum SPI clocking speed of the device in Hz.
+
+  spi-rx-bus-width:
+    description:
+      Bus width to the SPI bus used for read transfers.
+      If 0 is provided, then no RX will be possible on this device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 4, 8]
+    default: 1
+
+  spi-rx-delay-us:
+    description:
+      Delay, in microseconds, after a read transfer.
+
+  rx-sample-delay-ns:
+    description: SPI Rx sample delay offset, unit is nanoseconds.
+      The delay from the default sample time before the actual
+      sample of the rxd input signal occurs.
+
+  spi-tx-bus-width:
+    description:
+      Bus width to the SPI bus used for write transfers.
+      If 0 is provided, then no TX will be possible on this device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 4, 8]
+    default: 1
+
+  spi-tx-delay-us:
+    description:
+      Delay, in microseconds, after a write transfer.
+
+  stacked-memories:
+    description: Several SPI memories can be wired in stacked mode.
+      This basically means that either a device features several chip
+      selects, or that different devices must be seen as a single
+      bigger chip. This basically doubles (or more) the total address
+      space with only a single additional wire, while still needing
+      to repeat the commands when crossing a chip boundary. The size of
+      each chip should be provided as members of the array.
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    minItems: 2
+    maxItems: 4
+
+  parallel-memories:
+    description: Several SPI memories can be wired in parallel mode.
+      The devices are physically on a different buses but will always
+      act synchronously as each data word is spread across the
+      different memories (eg. even bits are stored in one memory, odd
+      bits in the other). This basically doubles the address space and
+      the throughput while greatly complexifying the wiring because as
+      many busses as devices must be wired. The size of each chip should
+      be provided as members of the array.
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    minItems: 2
+    maxItems: 4
+
+# The controller specific properties go here.
+allOf:
+  - $ref: cdns,qspi-nor-peripheral-props.yaml#
+  - $ref: samsung,spi-peripheral-props.yaml#
+  - $ref: nvidia,tegra210-quad-peripheral-props.yaml#
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
index dfb697c69341..0e382119c64f 100644
--- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
@@ -38,9 +38,7 @@ properties:
 
   clock-names:
     items:
-      - enum:
-          - SSPCLK
-          - sspclk
+      - const: sspclk
       - const: apb_pclk
 
   pl022,autosuspend-delay:
@@ -51,7 +49,7 @@ properties:
 
   pl022,rt:
     description: indicates the controller should run the message pump with realtime
-               priority to minimise the transfer latency on the bus (boolean)
+      priority to minimise the transfer latency on the bus (boolean)
     type: boolean
 
   dmas:
@@ -72,6 +70,9 @@ properties:
       - const: rx
       - const: tx
 
+  resets:
+    maxItems: 1
+
 patternProperties:
   "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
     type: object
@@ -80,61 +81,56 @@ patternProperties:
     properties:
       pl022,interface:
         description: SPI interface type
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - enum:
-              - 0  # SPI
-              - 1  # Texas Instruments Synchronous Serial Frame Format
-              - 2  # Microwire (Half Duplex)
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        enum:
+          - 0      # SPI
+          - 1      # Texas Instruments Synchronous Serial Frame Format
+          - 2      # Microwire (Half Duplex)
 
       pl022,com-mode:
         description: Specifies the transfer mode
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - enum:
-              - 0  # interrupt mode
-              - 1  # polling mode
-              - 2  # DMA mode
-            default: 1
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        enum:
+          - 0      # interrupt mode
+          - 1      # polling mode
+          - 2      # DMA mode
+        default: 1
 
       pl022,rx-level-trig:
         description: Rx FIFO watermark level
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 4
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 4
 
       pl022,tx-level-trig:
         description: Tx FIFO watermark level
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 4
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 4
 
       pl022,ctrl-len:
         description: Microwire interface - Control length
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0x03
-            maximum: 0x1f
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0x03
+        maximum: 0x1f
 
       pl022,wait-state:
         description: Microwire interface - Wait state
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - enum: [ 0, 1 ]
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        enum: [0, 1]
 
       pl022,duplex:
         description: Microwire interface - Full/Half duplex
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - enum: [ 0, 1 ]
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        enum: [0, 1]
 
 required:
   - compatible
   - reg
   - interrupts
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi@e0100000 {
@@ -147,7 +143,7 @@ examples:
         <&dma_controller 24 0>;
       dma-names = "rx", "tx";
 
-      m25p80@1 {
+      flash@1 {
         compatible = "st,m25p80";
         reg = <1>;
         spi-max-frequency = <12000000>;
diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
deleted file mode 100644
index e30e0c2a4bce..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-PXA2xx SSP SPI Controller
-
-Required properties:
-- compatible: Must be "marvell,mmp2-ssp".
-- reg: Offset and length of the device's register set.
-- interrupts: Should be the interrupt number.
-- clocks: Should contain a single entry describing the clock input.
-- #address-cells:  Number of cells required to define a chip select address.
-- #size-cells: Should be zero.
-
-Optional properties:
-- cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
-  Documentation/devicetree/bindings/spi/spi-bus.txt
-- spi-slave: Empty property indicating the SPI controller is used in slave mode.
-- ready-gpios: GPIO used to signal a SPI master that the FIFO is filled
-  and we're ready to service a transfer. Only useful in slave mode.
-
-Child nodes represent devices on the SPI bus
-  See ../spi/spi-bus.txt
-
-Example:
-	ssp1: spi@d4035000 {
-		compatible = "marvell,mmp2-ssp";
-		reg = <0xd4035000 0x1000>;
-		clocks = <&soc_clocks MMP2_CLK_SSP0>;
-		interrupts = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
deleted file mode 100644
index a0edac12d8df..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip SPI Controller
-
-The Rockchip SPI controller is used to interface with various devices such as flash
-and display controllers using the SPI communication interface.
-
-Required Properties:
-
-- compatible: should be one of the following.
-    "rockchip,rv1108-spi" for rv1108 SoCs.
-    "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs.
-    "rockchip,rk3036-spi" for rk3036 SoCS.
-    "rockchip,rk3066-spi" for rk3066 SoCs.
-    "rockchip,rk3188-spi" for rk3188 SoCs.
-    "rockchip,rk3228-spi" for rk3228 SoCS.
-    "rockchip,rk3288-spi" for rk3288 SoCs.
-    "rockchip,rk3368-spi" for rk3368 SoCs.
-    "rockchip,rk3399-spi" for rk3399 SoCs.
-- reg: physical base address of the controller and length of memory mapped
-       region.
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
-              depends on the interrupt controller.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
-			   the peripheral clock.
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-
-Optional Properties:
-
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-		Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request names should include "tx" and "rx" if present.
-- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
-		Rx data (may need to be fine tuned for high capacitance lines).
-		No delay (0) by default.
-- pinctrl-names: Names for the pin configuration(s); may be "default" or
-		"sleep", where the "sleep" configuration may describe the state
-		the pins should be in during system suspend. See also
-		pinctrl/pinctrl-bindings.txt.
-
-
-Example:
-
-	spi0: spi@ff110000 {
-		compatible = "rockchip,rk3066-spi";
-		reg = <0xff110000 0x1000>;
-		dmas = <&pdma1 11>, <&pdma1 12>;
-		dma-names = "tx", "rx";
-		rx-sample-delay-ns = <10>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
-		clock-names = "spiclk", "apb_pclk";
-		pinctrl-0 = <&spi1_pins>;
-		pinctrl-1 = <&spi1_sleep>;
-		pinctrl-names = "default", "sleep";
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
new file mode 100644
index 000000000000..66e49947b703
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-rockchip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SPI Controller
+
+description:
+  The Rockchip SPI controller is used to interface with various devices such
+  as flash and display controllers using the SPI communication interface.
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3036-spi
+      - const: rockchip,rk3066-spi
+      - const: rockchip,rk3228-spi
+      - const: rockchip,rv1108-spi
+      - items:
+          - enum:
+              - rockchip,px30-spi
+              - rockchip,rk3128-spi
+              - rockchip,rk3188-spi
+              - rockchip,rk3288-spi
+              - rockchip,rk3308-spi
+              - rockchip,rk3328-spi
+              - rockchip,rk3368-spi
+              - rockchip,rk3399-spi
+              - rockchip,rk3568-spi
+              - rockchip,rk3588-spi
+              - rockchip,rv1126-spi
+          - const: rockchip,rk3066-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: transfer-clock
+      - description: peripheral clock
+
+  clock-names:
+    items:
+      - const: spiclk
+      - const: apb_pclk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  rx-sample-delay-ns:
+    default: 0
+    description:
+      Nano seconds to delay after the SCLK edge before sampling Rx data
+      (may need to be fine tuned for high capacitance lines).
+      If not specified 0 will be used.
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+    description:
+      Names for the pin configuration(s); may be "default" or "sleep",
+      where the "sleep" configuration may describe the state
+      the pins should be in during system suspend.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0: spi@ff110000 {
+      compatible = "rockchip,rk3066-spi";
+      reg = <0xff110000 0x1000>;
+      interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+      clock-names = "spiclk", "apb_pclk";
+      dmas = <&pdma1 11>, <&pdma1 12>;
+      dma-names = "tx", "rx";
+      pinctrl-0 = <&spi1_pins>;
+      pinctrl-1 = <&spi1_sleep>;
+      pinctrl-names = "default", "sleep";
+      rx-sample-delay-ns = <10>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt
deleted file mode 100644
index 421722b93992..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-rspi.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-Device tree configuration for Renesas RSPI/QSPI driver
-
-Required properties:
-- compatible       : For Renesas Serial Peripheral Interface on legacy SH:
-		     "renesas,rspi-<soctype>", "renesas,rspi" as fallback.
-		     For Renesas Serial Peripheral Interface on RZ/A:
-		     "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
-		     For Quad Serial Peripheral Interface on R-Car Gen2 and
-		     RZ/G1 devices:
-		     "renesas,qspi-<soctype>", "renesas,qspi" as fallback.
-		     Examples with soctypes are:
-		        - "renesas,rspi-sh7757" (SH)
-			- "renesas,rspi-r7s72100" (RZ/A1H)
-			- "renesas,rspi-r7s9210" (RZ/A2)
-			- "renesas,qspi-r8a7743" (RZ/G1M)
-			- "renesas,qspi-r8a7744" (RZ/G1N)
-			- "renesas,qspi-r8a7745" (RZ/G1E)
-			- "renesas,qspi-r8a77470" (RZ/G1C)
-			- "renesas,qspi-r8a7790" (R-Car H2)
-			- "renesas,qspi-r8a7791" (R-Car M2-W)
-			- "renesas,qspi-r8a7792" (R-Car V2H)
-			- "renesas,qspi-r8a7793" (R-Car M2-N)
-			- "renesas,qspi-r8a7794" (R-Car E2)
-- reg              : Address start and address range size of the device
-- interrupts       : A list of interrupt-specifiers, one for each entry in
-		     interrupt-names.
-		     If interrupt-names is not present, an interrupt specifier
-		     for a single muxed interrupt.
-- interrupt-names  : A list of interrupt names. Should contain (if present):
-		       - "error" for SPEI,
-		       - "rx" for SPRI,
-		       - "tx" to SPTI,
-		       - "mux" for a single muxed interrupt.
-- num-cs	   : Number of chip selects. Some RSPI cores have more than 1.
-- #address-cells   : Must be <1>
-- #size-cells      : Must be <0>
-
-Optional properties:
-- clocks           : Must contain a reference to the functional clock.
-- dmas             : Must contain a list of two references to DMA specifiers,
-		     one for transmission, and one for reception.
-- dma-names        : Must contain a list of two DMA names, "tx" and "rx".
-
-Pinctrl properties might be needed, too.  See
-Documentation/devicetree/bindings/pinctrl/renesas,*.
-
-Examples:
-
-	spi0: spi@e800c800 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800c800 0x24>;
-		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		interrupt-parent = <&gic>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	spi: spi@e6b10000 {
-		compatible = "renesas,qspi-r8a7791", "renesas,qspi";
-		reg = <0 0xe6b10000 0 0x2c>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
-		dma-names = "tx", "rx";
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
deleted file mode 100644
index 49028a4f5df1..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-samsung.txt
+++ /dev/null
@@ -1,122 +0,0 @@
-* Samsung SPI Controller
-
-The Samsung SPI controller is used to interface with various devices such as flash
-and display controllers using the SPI communication interface.
-
-Required SoC Specific Properties:
-
-- compatible: should be one of the following.
-    - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms
-    - samsung,s3c6410-spi: for s3c6410 platforms
-    - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms
-    - samsung,exynos5433-spi: for exynos5433 compatible controllers
-    - samsung,exynos7-spi: for exynos7 platforms <DEPRECATED>
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
-  depends on the interrupt controller.
-
-- dmas : Two or more DMA channel specifiers following the convention outlined
-  in bindings/dma/dma.txt
-
-- dma-names: Names for the dma channels. There must be at least one channel
-  named "tx" for transmit and named "rx" for receive.
-
-- clocks: specifies the clock IDs provided to the SPI controller; they are
-  required for interacting with the controller itself, for synchronizing the bus
-  and as I/O clock (the latter is required by exynos5433 and exynos7).
-
-- clock-names: string names of the clocks in the 'clocks' property; for all the
-  the devices the names must be "spi", "spi_busclkN" (where N is determined by
-  "samsung,spi-src-clk"), while Exynos5433 should specify a third clock
-  "spi_ioclk" for the I/O clock.
-
-Required Board Specific Properties:
-
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-
-Optional Board Specific Properties:
-
-- samsung,spi-src-clk: If the spi controller includes a internal clock mux to
-  select the clock source for the spi bus clock, this property can be used to
-  indicate the clock to be used for driving the spi bus clock. If not specified,
-  the clock number 0 is used as default.
-
-- num-cs: Specifies the number of chip select lines supported. If
-  not specified, the default number of chip select lines is set to 1.
-
-- cs-gpios: should specify GPIOs used for chipselects (see spi-bus.txt)
-
-- no-cs-readback: the CS line is disconnected, therefore the device should not
-  operate based on CS signalling.
-
-SPI Controller specific data in SPI slave nodes:
-
-- The spi slave nodes should provide the following information which is required
-  by the spi controller.
-
-  - samsung,spi-feedback-delay: The sampling phase shift to be applied on the
-    miso line (to account for any lag in the miso line). The following are the
-    valid values.
-
-      - 0: No phase shift.
-      - 1: 90 degree phase shift sampling.
-      - 2: 180 degree phase shift sampling.
-      - 3: 270 degree phase shift sampling.
-
-Aliases:
-
-- All the SPI controller nodes should be represented in the aliases node using
-  the following format 'spi{n}' where n is a unique number for the alias.
-
-
-Example:
-
-- SoC Specific Portion:
-
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 66 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-- Board Specific Portion:
-
-	spi_0: spi@12d20000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-		cs-gpios = <&gpa2 5 0>;
-
-		w25q80bw@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "w25x80";
-			reg = <0>;
-			spi-max-frequency = <10000>;
-
-			controller-data {
-				samsung,spi-feedback-delay = <0>;
-			};
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "Kernel";
-				reg = <0x40000 0xc0000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.yaml b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
index 140e4351a19f..6e7e394fc1e4 100644
--- a/Documentation/devicetree/bindings/spi/spi-sifive.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
@@ -17,26 +17,27 @@ allOf:
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-spi
+      - enum:
+          - sifive,fu540-c000-spi
+          - sifive,fu740-c000-spi
       - const: sifive,spi0
 
     description:
       Should be "sifive,<chip>-spi" and "sifive,spi<version>".
       Supported compatible strings are -
-      "sifive,fu540-c000-spi" for the SiFive SPI v0 as integrated
-      onto the SiFive FU540 chip, and "sifive,spi0" for the SiFive
-      SPI v0 IP block with no chip integration tweaks.
+      "sifive,fu540-c000-spi" and "sifive,fu740-c000-spi" for the SiFive SPI v0
+      as integrated onto the SiFive FU540 and FU740 chip resp, and "sifive,spi0"
+      for the SiFive SPI v0 IP block with no chip integration tweaks.
       Please refer to sifive-blocks-ip-versioning.txt for details
 
       SPI RTL that corresponds to the IP block version numbers can be found here -
       https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/spi
 
   reg:
-    maxItems: 1
-
-    description:
-      Physical base address and size of SPI registers map
-      A second (optional) range can indicate memory mapped flash
+    minItems: 1
+    items:
+      - description: SPI registers region
+      - description: Memory mapped flash region
 
   interrupts:
     maxItems: 1
@@ -50,18 +51,16 @@ properties:
   sifive,fifo-depth:
     description:
       Depth of hardware queues; defaults to 8
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - enum: [ 8 ]
-      - default: 8
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum: [8]
+    default: 8
 
   sifive,max-bits-per-word:
     description:
       Maximum bits per word; defaults to 8
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 8 ]
-      - default: 8
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum: [0, 1, 2, 3, 4, 5, 6, 7, 8]
+    default: 8
 
 required:
   - compatible
@@ -69,11 +68,13 @@ required:
   - interrupts
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi: spi@10040000 {
       compatible = "sifive,fu540-c000-spi", "sifive,spi0";
-      reg = <0x0 0x10040000 0x0 0x1000 0x0 0x20000000 0x0 0x10000000>;
+      reg = <0x10040000 0x1000>, <0x20000000 0x10000000>;
       interrupt-parent = <&plic>;
       interrupts = <51>;
       clocks = <&tlclk>;
diff --git a/Documentation/devicetree/bindings/spi/spi-sirf.txt b/Documentation/devicetree/bindings/spi/spi-sirf.txt
deleted file mode 100644
index ddd78ff68fae..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-sirf.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* CSR SiRFprimaII Serial Peripheral Interface
-
-Required properties:
-- compatible : Should be "sirf,prima2-spi", "sirf,prima2-usp"
-               or "sirf,atlas7-usp"
-- reg : Offset and length of the register set for the device
-- interrupts : Should contain SPI interrupt
-- resets: phandle to the reset controller asserting this device in
-          reset
-  See ../reset/reset.txt for details.
-- dmas : Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names : Must include the following entries:
-  - rx
-  - tx
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-
-- #address-cells: Number of cells required to define a chip select
-                  address on the SPI bus. Should be set to 1.
-- #size-cells:    Should be zero.
-
-Optional properties:
-- spi-max-frequency: Specifies maximum SPI clock frequency,
-                     Units - Hz. Definition as per
-                     Documentation/devicetree/bindings/spi/spi-bus.txt
-- cs-gpios:     should specify GPIOs used for chipselects.
-
-Example:
-
-spi0: spi@b00d0000 {
-	compatible = "sirf,prima2-spi";
-	reg = <0xb00d0000 0x10000>;
-	interrupts = <15>;
-	dmas = <&dmac1 9>,
-		<&dmac1 4>;
-	dma-names = "rx", "tx";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&clks 19>;
-	resets = <&rstc 26>;
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt b/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt
deleted file mode 100644
index c37e5a179b21..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Binding for MTK SPI Slave controller
-
-Required properties:
-- compatible: should be one of the following.
-    - mediatek,mt2712-spi-slave: for mt2712 platforms
-- reg: Address and length of the register set for the device.
-- interrupts: Should contain spi interrupt.
-- clocks: phandles to input clocks.
-  It's clock gate, and should be <&infracfg CLK_INFRA_AO_SPI1>.
-- clock-names: should be "spi" for the clock gate.
-
-Optional properties:
-- assigned-clocks: it's mux clock, should be <&topckgen CLK_TOP_SPISLV_SEL>.
-- assigned-clock-parents: parent of mux clock.
-  It's PLL, and should be one of the following.
-   -  <&topckgen CLK_TOP_UNIVPLL1_D2>: specify parent clock 312MHZ.
-				       It's the default one.
-   -  <&topckgen CLK_TOP_UNIVPLL1_D4>: specify parent clock 156MHZ.
-   -  <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
-   -  <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
-
-Example:
-- SoC Specific Portion:
-spis1: spi@10013000 {
-	compatible = "mediatek,mt2712-spi-slave";
-	reg = <0 0x10013000 0 0x100>;
-	interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&infracfg CLK_INFRA_AO_SPI1>;
-	clock-names = "spi";
-	assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
-	assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt
deleted file mode 100644
index 2567c829e2dc..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Spreadtrum ADI controller
-
-ADI is the abbreviation of Anolog-Digital interface, which is used to access
-analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
-framework for its hardware implementation is alike to SPI bus and its timing
-is compatile to SPI timing.
-
-ADI controller has 50 channels including 2 software read/write channels and
-48 hardware channels to access analog chip. For 2 software read/write channels,
-users should set ADI registers to access analog chip. For hardware channels,
-we can configure them to allow other hardware components to use it independently,
-which means we can just link one analog chip address to one hardware channel,
-then users can access the mapped analog chip address by this hardware channel
-triggered by hardware components instead of ADI software channels.
-
-Thus we introduce one property named "sprd,hw-channels" to configure hardware
-channels, the first value specifies the hardware channel id which is used to
-transfer data triggered by hardware automatically, and the second value specifies
-the analog chip address where user want to access by hardware components.
-
-Since we have multi-subsystems will use unique ADI to access analog chip, when
-one system is reading/writing data by ADI software channels, that should be under
-one hardware spinlock protection to prevent other systems from reading/writing
-data by ADI software channels at the same time, or two parallel routine of setting
-ADI registers will make ADI controller registers chaos to lead incorrect results.
-Then we need one hardware spinlock to synchronize between the multiple subsystems.
-
-The new version ADI controller supplies multiple master channels for different
-subsystem accessing, that means no need to add hardware spinlock to synchronize,
-thus change the hardware spinlock support to be optional to keep backward
-compatibility.
-
-Required properties:
-- compatible: Should be "sprd,sc9860-adi".
-- reg: Offset and length of ADI-SPI controller register space.
-- #address-cells: Number of cells required to define a chip select address
-	on the ADI-SPI bus. Should be set to 1.
-- #size-cells: Size of cells required to define a chip select address size
-	on the ADI-SPI bus. Should be set to 0.
-
-Optional properties:
-- hwlocks: Reference to a phandle of a hwlock provider node.
-- hwlock-names: Reference to hwlock name strings defined in the same order
-	as the hwlocks, should be "adi".
-- sprd,hw-channels: This is an array of channel values up to 49 channels.
-	The first value specifies the hardware channel id which is used to
-	transfer data triggered by hardware automatically, and the second
-	value specifies the analog chip address where user want to access
-	by hardware components.
-
-SPI slave nodes must be children of the SPI controller node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
-
-Example:
-	adi_bus: spi@40030000 {
-		compatible = "sprd,sc9860-adi";
-		reg = <0 0x40030000 0 0x10000>;
-		hwlocks = <&hwlock1 0>;
-		hwlock-names = "adi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		sprd,hw-channels = <30 0x8c20>;
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
new file mode 100644
index 000000000000..3a58cf0f1ec8
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-sunplus-sp7021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus sp7021 SPI controller
+
+allOf:
+  - $ref: "spi-controller.yaml"
+
+maintainers:
+  - Li-hao Kuo <lhjeff911@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sunplus,sp7021-spi
+
+  reg:
+    items:
+      - description: the SPI master registers
+      - description: the SPI slave registers
+
+  reg-names:
+    items:
+      - const: master
+      - const: slave
+
+  interrupt-names:
+    items:
+      - const: dma_w
+      - const: master_risc
+      - const: slave_risc
+
+  interrupts:
+    minItems: 3
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - resets
+  - pinctrl-names
+  - pinctrl-0
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi@9C002D80 {
+        compatible = "sunplus,sp7021-spi";
+        reg = <0x9C002D80 0x80>, <0x9C002E00 0x80>;
+        reg-names = "master", "slave";
+        interrupt-parent = <&intc>;
+        interrupt-names = "dma_w",
+                          "master_risc",
+                          "slave_risc";
+        interrupts = <144 IRQ_TYPE_LEVEL_HIGH>,
+                     <146 IRQ_TYPE_LEVEL_HIGH>,
+                     <145 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0x32>;
+        resets = <&rstc 0x22>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pins_spi0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
deleted file mode 100644
index e1201573a29a..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Socionext UniPhier SPI controller driver
-
-UniPhier SoCs have SCSSI which supports SPI single channel.
-
-Required properties:
- - compatible: should be "socionext,uniphier-scssi"
- - reg: address and length of the spi master registers
- - #address-cells: must be <1>, see spi-bus.txt
- - #size-cells: must be <0>, see spi-bus.txt
- - interrupts: a single interrupt specifier
- - pinctrl-names: should be "default"
- - pinctrl-0: pin control state for the default mode
- - clocks: a phandle to the clock for the device
- - resets: a phandle to the reset control for the device
-
-Example:
-
-spi0: spi@54006000 {
-	compatible = "socionext,uniphier-scssi";
-	reg = <0x54006000 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	interrupts = <0 39 4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi0>;
-	clocks = <&peri_clk 11>;
-	resets = <&peri_rst 11>;
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.txt b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
deleted file mode 100644
index 5f4ed3e5c994..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-xilinx.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Xilinx SPI controller Device Tree Bindings
--------------------------------------------------
-
-Required properties:
-- compatible		: Should be "xlnx,xps-spi-2.00.a", "xlnx,xps-spi-2.00.b" or "xlnx,axi-quad-spi-1.00.a"
-- reg			: Physical base address and size of SPI registers map.
-- interrupts		: Property with a value describing the interrupt
-			  number.
-
-Optional properties:
-- xlnx,num-ss-bits	 : Number of chip selects used.
-- xlnx,num-transfer-bits : Number of bits per transfer. This will be 8 if not specified
-
-Example:
-	axi_quad_spi@41e00000 {
-			compatible = "xlnx,xps-spi-2.00.a";
-			interrupt-parent = <&intc>;
-			interrupts = <0 31 1>;
-			reg = <0x41e00000 0x10000>;
-			xlnx,num-ss-bits = <0x1>;
-			xlnx,num-transfer-bits = <32>;
-	};
-
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
new file mode 100644
index 000000000000..bbb735603f29
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SPI controller
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - xlnx,xps-spi-2.00.a
+      - xlnx,xps-spi-2.00.b
+      - xlnx,axi-quad-spi-1.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  xlnx,num-ss-bits:
+    description: Number of chip selects used.
+    minimum: 1
+    maximum: 32
+
+  xlnx,num-transfer-bits:
+    description: Number of bits per transfer. This will be 8 if not specified.
+    enum: [8, 16, 32]
+    default: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi0: spi@41e00000 {
+      compatible = "xlnx,xps-spi-2.00.a";
+      interrupt-parent = <&intc>;
+      interrupts = <0 31 1>;
+      reg = <0x41e00000 0x10000>;
+      xlnx,num-ss-bits = <0x1>;
+      xlnx,num-transfer-bits = <32>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-xlp.txt b/Documentation/devicetree/bindings/spi/spi-xlp.txt
deleted file mode 100644
index f4925ec0ed33..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-xlp.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-SPI Master controller for Netlogic XLP MIPS64 SOCs
-==================================================
-
-Currently this SPI controller driver is supported for the following
-Netlogic XLP SoCs:
-	XLP832, XLP316, XLP208, XLP980, XLP532
-
-Required properties:
-- compatible		: Should be "netlogic,xlp832-spi".
-- #address-cells	: Number of cells required to define a chip select address
-			  on the SPI bus.
-- #size-cells		: Should be zero.
-- reg			: Should contain register location and length.
-- clocks		: Phandle of the spi clock
-- interrupts		: Interrupt number used by this controller.
-
-SPI slave nodes must be children of the SPI master node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
-
-Example:
-
-	spi: xlp_spi@3a100 {
-		compatible = "netlogic,xlp832-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x3a100 0x100>;
-		clocks = <&spi_clk>;
-		interrupts = <34>;
-		interrupt-parent = <&pic>;
-
-		spi_nor@1 {
-			compatible = "spansion,s25sl12801";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <1>;	/* Chip Select */
-			spi-max-frequency = <40000000>;
-		};
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
deleted file mode 100644
index 16b734ad3102..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Xilinx Zynq QSPI controller Device Tree Bindings
--------------------------------------------------------------------
-
-Required properties:
-- compatible		: Should be "xlnx,zynq-qspi-1.0".
-- reg			: Physical base address and size of QSPI registers map.
-- interrupts		: Property with a value describing the interrupt
-			  number.
-- clock-names		: List of input clock names - "ref_clk", "pclk"
-			  (See clock bindings for details).
-- clocks		: Clock phandles (see clock bindings for details).
-
-Optional properties:
-- num-cs		: Number of chip selects used.
-
-Example:
-	qspi: spi@e000d000 {
-		compatible = "xlnx,zynq-qspi-1.0";
-		reg = <0xe000d000 0x1000>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 19 4>;
-		clock-names = "ref_clk", "pclk";
-		clocks = <&clkc 10>, <&clkc 43>;
-		num-cs = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
deleted file mode 100644
index 0f6d37ff541c..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings
--------------------------------------------------------------------
-
-Required properties:
-- compatible		: Should be "xlnx,zynqmp-qspi-1.0".
-- reg			: Physical base address and size of GQSPI registers map.
-- interrupts		: Property with a value describing the interrupt
-			  number.
-- clock-names		: List of input clock names - "ref_clk", "pclk"
-			  (See clock bindings for details).
-- clocks		: Clock phandles (see clock bindings for details).
-
-Optional properties:
-- num-cs		: Number of chip selects used.
-
-Example:
-	qspi: spi@ff0f0000 {
-		compatible = "xlnx,zynqmp-qspi-1.0";
-		clock-names = "ref_clk", "pclk";
-		clocks = <&misc_clk &misc_clk>;
-		interrupts = <0 15 4>;
-		interrupt-parent = <&gic>;
-		num-cs = <1>;
-		reg = <0x0 0xff0f0000 0x1000>,<0x0 0xc0000000 0x8000000>;
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
new file mode 100644
index 000000000000..6bf0edc57f4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-zynqmp-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq UltraScale+ MPSoC GQSPI controller
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-qspi-1.0
+
+  reg:
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: pclk
+
+  clocks:
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      qspi: spi@ff0f0000 {
+        compatible = "xlnx,zynqmp-qspi-1.0";
+        clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>;
+        clock-names = "ref_clk", "pclk";
+        interrupts = <0 15 4>;
+        interrupt-parent = <&gic>;
+        reg = <0x0 0xff0f0000 0x0 0x1000>,
+              <0x0 0xc0000000 0x0 0x8000000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
deleted file mode 100644
index 5bb4a8f1df7a..000000000000
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Atmel SPI device
-
-Required properties:
-- compatible : should be "atmel,at91rm9200-spi" or "microchip,sam9x60-spi".
-- reg: Address and length of the register set for the device
-- interrupts: Should contain spi interrupt
-- cs-gpios: chipselects (optional for SPI controller version >= 2 with the
-  Chip Select Active After Transfer feature).
-- clock-names: tuple listing input clock names.
-	Required elements: "spi_clk"
-- clocks: phandles to input clocks.
-
-Optional properties:
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
-  capable SPI controllers.
-
-Example:
-
-spi1: spi@fffcc000 {
-	compatible = "atmel,at91rm9200-spi";
-	reg = <0xfffcc000 0x4000>;
-	interrupts = <13 4 5>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&spi1_clk>;
-	clock-names = "spi_clk";
-	cs-gpios = <&pioB 3 0>;
-	atmel,fifo-size = <32>;
-
-	mmc-slot@0 {
-		compatible = "mmc-spi-slot";
-		reg = <0>;
-		gpios = <&pioC 4 0>;	/* CD */
-		spi-max-frequency = <25000000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
new file mode 100644
index 000000000000..a3ab1a1f1eb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Spreadtrum ADI controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+  ADI is the abbreviation of Anolog-Digital interface, which is used to access
+  analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
+  framework for its hardware implementation is alike to SPI bus and its timing
+  is compatile to SPI timing.
+
+  ADI controller has 50 channels including 2 software read/write channels and
+  48 hardware channels to access analog chip. For 2 software read/write channels,
+  users should set ADI registers to access analog chip. For hardware channels,
+  we can configure them to allow other hardware components to use it independently,
+  which means we can just link one analog chip address to one hardware channel,
+  then users can access the mapped analog chip address by this hardware channel
+  triggered by hardware components instead of ADI software channels.
+
+  Thus we introduce one property named "sprd,hw-channels" to configure hardware
+  channels, the first value specifies the hardware channel id which is used to
+  transfer data triggered by hardware automatically, and the second value specifies
+  the analog chip address where user want to access by hardware components.
+
+  Since we have multi-subsystems will use unique ADI to access analog chip, when
+  one system is reading/writing data by ADI software channels, that should be under
+  one hardware spinlock protection to prevent other systems from reading/writing
+  data by ADI software channels at the same time, or two parallel routine of setting
+  ADI registers will make ADI controller registers chaos to lead incorrect results.
+  Then we need one hardware spinlock to synchronize between the multiple subsystems.
+
+  The new version ADI controller supplies multiple master channels for different
+  subsystem accessing, that means no need to add hardware spinlock to synchronize,
+  thus change the hardware spinlock support to be optional to keep backward
+  compatibility.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc9860-adi
+      - sprd,sc9863-adi
+      - sprd,ums512-adi
+
+  reg:
+    maxItems: 1
+
+  hwlocks:
+    maxItems: 1
+
+  hwlock-names:
+    const: adi
+
+  sprd,hw-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: A list of hardware channels
+    minItems: 1
+    maxItems: 48
+    items:
+      items:
+        - description: The hardware channel id which is used to transfer data
+            triggered by hardware automatically, channel id 0-1 are for software
+            use, 2-49 are hardware channels.
+          minimum: 2
+          maximum: 49
+        - description: The analog chip address where user want to access by
+            hardware components.
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    aon {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        adi_bus: spi@40030000 {
+            compatible = "sprd,sc9860-adi";
+            reg = <0 0x40030000 0 0x10000>;
+            hwlocks = <&hwlock1 0>;
+            hwlock-names = "adi";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            sprd,hw-channels = <30 0x8c20>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
index 3665a5fe6b7f..6ec6f556182f 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 Quad Serial Peripheral Interface (QSPI) bindings
 
 maintainers:
-  - Christophe Kerello <christophe.kerello@st.com>
-  - Patrice Chotard <patrice.chotard@st.com>
+  - Christophe Kerello <christophe.kerello@foss.st.com>
+  - Patrice Chotard <patrice.chotard@foss.st.com>
 
 allOf:
   - $ref: "spi-controller.yaml#"
@@ -24,8 +24,8 @@ properties:
 
   reg-names:
     items:
-     - const: qspi
-     - const: qspi_mm
+      - const: qspi
+      - const: qspi_mm
 
   clocks:
     maxItems: 1
@@ -53,6 +53,8 @@ required:
   - clocks
   - interrupts
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
index e49ecbf715ba..3d64bed266ac 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -13,8 +13,8 @@ description: |
   from 4 to 32-bit data size.
 
 maintainers:
-  - Erwan Leray <erwan.leray@st.com>
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Erwan Leray <erwan.leray@foss.st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 allOf:
   - $ref: "spi-controller.yaml#"
@@ -76,6 +76,8 @@ required:
   - clocks
   - interrupts
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -94,12 +96,6 @@ examples:
       dma-names = "rx", "tx";
       cs-gpios = <&gpioa 11 0>;
 
-      aardvark@0 {
-        compatible = "totalphase,aardvark";
-        reg = <0>;
-        spi-max-frequency = <4000000>;
-        st,spi-midi-ns = <4000>;
-      };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt
index e65fde4a7388..47b184bce414 100644
--- a/Documentation/devicetree/bindings/spi/ti_qspi.txt
+++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt
@@ -29,7 +29,7 @@ modification to bootloader.
 Example:
 
 For am4372:
-qspi: qspi@4b300000 {
+qspi: qspi@47900000 {
 	compatible = "ti,am4372-qspi";
 	reg = <0x47900000 0x100>, <0x30000000 0x4000000>;
 	reg-names = "qspi_base", "qspi_mmap";
diff --git a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
new file mode 100644
index 000000000000..1f1c40a9f320
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/xlnx,zynq-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq QSPI controller
+
+description:
+  The Xilinx Zynq QSPI controller is used to access multi-bit serial flash
+  memory devices.
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    const: xlnx,zynq-qspi-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: reference clock
+      - description: peripheral clock
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@e000d000 {
+        compatible = "xlnx,zynq-qspi-1.0";
+        reg = <0xe000d000 0x1000>;
+        interrupt-parent = <&intc>;
+        interrupts = <0 19 4>;
+        clock-names = "ref_clk", "pclk";
+        clocks = <&clkc 10>, <&clkc 43>;
+        num-cs = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
new file mode 100644
index 000000000000..f882903769f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon SPMI controller
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+  The HiSilicon SPMI BUS controller is found on some Kirin-based designs.
+  It is a MIPI System Power Management (SPMI) controller.
+
+  The PMIC part is provided by
+  ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+
+allOf:
+  - $ref: spmi.yaml#
+
+properties:
+
+  $nodename:
+    pattern: "spmi@[0-9a-f]"
+
+  compatible:
+    const: hisilicon,kirin970-spmi-controller
+
+  reg:
+    maxItems: 1
+
+  hisilicon,spmi-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      number of the Kirin 970 SPMI channel where the SPMI devices are connected.
+
+required:
+  - compatible
+  - reg
+  - hisilicon,spmi-channel
+
+patternProperties:
+  "@[0-9a-f]$":
+    type: object
+
+    description: |
+      PMIC properties, which are specific to the used SPMI PMIC device(s).
+      When used in combination with HiSilicon 6421v600, the properties
+      are documented at
+      drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      spmi: spmi@fff24000 {
+        compatible = "hisilicon,kirin970-spmi-controller";
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x0 0xfff24000 0x0 0x1000>;
+        hisilicon,spmi-channel = <2>;
+
+        pmic@0 {
+          reg = <0 0>;
+          /* pmic properties */
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
new file mode 100644
index 000000000000..abcbbe13723f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/mtk,spmi-mtk-pmif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek SPMI Controller
+
+maintainers:
+  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |+
+  On MediaTek SoCs the PMIC is connected via SPMI and the controller allows
+  for multiple SoCs to control a single SPMI master.
+
+allOf:
+  - $ref: "spmi.yaml"
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6873-spmi
+      - mediatek,mt8195-spmi
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pmif
+      - const: spmimst
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: pmif_sys_ck
+      - const: pmif_tmr_ck
+      - const: spmimst_clk_mux
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8192-clk.h>
+
+    spmi: spmi@10027000 {
+        compatible = "mediatek,mt6873-spmi";
+        reg = <0x10027000 0xe00>,
+              <0x10029000 0x100>;
+        reg-names = "pmif", "spmimst";
+        clocks = <&infracfg CLK_INFRA_PMIC_AP>,
+                 <&infracfg CLK_INFRA_PMIC_TMR>,
+                 <&topckgen CLK_TOP_SPMI_MST_SEL>;
+        clock-names = "pmif_sys_ck",
+                      "pmif_tmr_ck",
+                      "spmimst_clk_mux";
+        assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
deleted file mode 100644
index e16b9b5afc70..000000000000
--- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Qualcomm SPMI Controller (PMIC Arbiter)
-
-The SPMI PMIC Arbiter is found on Snapdragon chipsets.  It is an SPMI
-controller with wrapping arbitration logic to allow for multiple on-chip
-devices to control a single SPMI master.
-
-The PMIC Arbiter can also act as an interrupt controller, providing interrupts
-to slave devices.
-
-See spmi.txt for the generic SPMI controller binding requirements for child
-nodes.
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-generic interrupt controller binding documentation.
-
-Required properties:
-- compatible : should be "qcom,spmi-pmic-arb".
-- reg-names  : must contain:
-     "core" - core registers
-     "intr" - interrupt controller registers
-     "cnfg" - configuration registers
-   Registers used only for V2 PMIC Arbiter:
-     "chnls"  - tx-channel per virtual slave registers.
-     "obsrvr" - rx-channel (called observer) per virtual slave registers.
-
-- reg : address + size pairs describing the PMIC arb register sets; order must
-        correspond with the order of entries in reg-names
-- #address-cells : must be set to 2
-- #size-cells : must be set to 0
-- qcom,ee : indicates the active Execution Environment identifier (0-5)
-- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
-- interrupts : interrupt list for the PMIC Arb controller, must contain a
-               single interrupt entry for the peripheral interrupt
-- interrupt-names : corresponding interrupt names for the interrupts
-                    listed in the 'interrupts' property, must contain:
-     "periph_irq" - summary interrupt for PMIC peripherals
-- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
-- #interrupt-cells :  must be set to 4. Interrupts are specified as a 4-tuple:
-    cell 1: slave ID for the requested interrupt (0-15)
-    cell 2: peripheral ID for requested interrupt (0-255)
-    cell 3: the requested peripheral interrupt (0-7)
-    cell 4: interrupt flags indicating level-sense information, as defined in
-            dt-bindings/interrupt-controller/irq.h
-
-Example:
-
-	spmi {
-		compatible = "qcom,spmi-pmic-arb";
-		reg-names = "core", "intr", "cnfg";
-		reg = <0xfc4cf000 0x1000>,
-		      <0xfc4cb000 0x1000>,
-		      <0xfc4ca000 0x1000>;
-
-		interrupt-names = "periph_irq";
-		interrupts = <0 190 0>;
-
-		qcom,ee = <0>;
-		qcom,channel = <0>;
-
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		interrupt-controller;
-		#interrupt-cells = <4>;
-	};
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
new file mode 100644
index 000000000000..fee4f0eb4665
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI Controller (PMIC Arbiter)
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+  The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
+  controller with wrapping arbitration logic to allow for multiple on-chip
+  devices to control a single SPMI master.
+
+  The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+  to slave devices.
+
+allOf:
+  - $ref: spmi.yaml
+
+properties:
+  compatible:
+    const: qcom,spmi-pmic-arb
+
+  reg:
+    oneOf:
+      - items: # V1
+          - description: core registers
+          - description: interrupt controller registers
+          - description: configuration registers
+      - items: # V2
+          - description: core registers
+          - description: tx-channel per virtual slave regosters
+          - description: rx-channel (called observer) per virtual slave registers
+          - description: interrupt controller registers
+          - description: configuration registers
+
+  reg-names:
+    oneOf:
+      - items:
+          - const: core
+          - const: intr
+          - const: cnfg
+      - items:
+          - const: core
+          - const: chnls
+          - const: obsrvr
+          - const: intr
+          - const: cnfg
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: periph_irq
+
+  interrupt-controller: true
+
+  '#address-cells': true
+
+  '#interrupt-cells':
+    const: 4
+    description: |
+      cell 1: slave ID for the requested interrupt (0-15)
+      cell 2: peripheral ID for requested interrupt (0-255)
+      cell 3: the requested peripheral interrupt (0-7)
+      cell 4: interrupt flags indicating level-sense information,
+              as defined in dt-bindings/interrupt-controller/irq.h
+
+  '#size-cells': true
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+    description: >
+      indicates the active Execution Environment identifier
+
+  qcom,channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+    description: >
+      which of the PMIC Arb provided channels to use for accesses
+
+required:
+  - compatible
+  - reg-names
+  - qcom,ee
+  - qcom,channel
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spmi@fc4cf000 {
+        compatible = "qcom,spmi-pmic-arb";
+        reg-names = "core", "intr", "cnfg";
+        reg = <0xfc4cf000 0x1000>,
+              <0xfc4cb000 0x1000>,
+              <0xfc4ca000 0x1000>;
+
+        interrupt-names = "periph_irq";
+        interrupts = <0 190 0>;
+
+        qcom,ee = <0>;
+        qcom,channel = <0>;
+
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        interrupt-controller;
+        #interrupt-cells = <4>;
+    };
+
diff --git a/Documentation/devicetree/bindings/spmi/spmi.txt b/Documentation/devicetree/bindings/spmi/spmi.txt
deleted file mode 100644
index 4bb10d161a27..000000000000
--- a/Documentation/devicetree/bindings/spmi/spmi.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-System Power Management Interface (SPMI) Controller
-
-This document defines a generic set of bindings for use by SPMI controllers.  A
-controller is modelled in device tree as a node with zero or more child nodes,
-each representing a unique slave on the bus.
-
-Required properties:
-- #address-cells : must be set to 2
-- #size-cells : must be set to 0
-
-Child nodes:
-
-An SPMI controller node can contain zero or more child nodes representing slave
-devices on the bus.  Child 'reg' properties are specified as an address, type
-pair.  The address must be in the range 0-15 (4 bits).  The type must be one of
-SPMI_USID (0) or SPMI_GSID (1) for Unique Slave ID or Group Slave ID respectively.
-These are the identifiers "statically assigned by the system integrator", as
-per the SPMI spec.
-
-Each child node must have one and only one 'reg' entry of type SPMI_USID.
-
-#include <dt-bindings/spmi/spmi.h>
-
-	spmi@.. {
-		compatible = "...";
-		reg = <...>;
-
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		child@0 {
-			compatible = "...";
-			reg = <0 SPMI_USID>;
-		};
-
-		child@7 {
-			compatible = "...";
-			reg = <7 SPMI_USID
-			       3 SPMI_GSID>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml
new file mode 100644
index 000000000000..c1b06fa5c631
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/spmi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/spmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Power Management Interface (SPMI) Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+  The System Power Management (SPMI) controller is a 2-wire bus defined
+  by the MIPI Alliance for power management control to be used on SoC designs.
+
+  SPMI controllers are modelled in device tree using a generic set of
+  bindings defined here, plus any bus controller specific properties, if
+  needed.
+
+  Each SPMI controller has zero or more child nodes (up to 16 ones), each
+  one representing an unique slave at the bus.
+
+properties:
+  $nodename:
+    pattern: "^spmi@.*"
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "@[0-9a-f]$":
+    description: up to 16 child PMIC nodes
+    type: object
+
+    properties:
+      reg:
+        items:
+          - minItems: 1
+            items:
+              - minimum: 0
+                maximum: 0xf
+              - enum: [ 0 ]
+                description:
+                  0 means user ID address. 1 is reserved for group ID
+                  address.
+
+    required:
+      - reg
+
+required:
+  - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+
+    spmi@0 {
+      reg = <0 0>;
+
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      child@0 {
+        reg = <0 SPMI_USID>;
+      };
+
+      child@7 {
+        reg = <7 SPMI_USID>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
index 4b5509436588..98a7dc7f467d 100644
--- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sram/allwinner,sun4i-a10-system-control.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 System Control Device Tree Bindings
+title: Allwinner A10 System Control
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -24,25 +24,31 @@ properties:
 
   compatible:
     oneOf:
-      - const: allwinner,sun4i-a10-sram-controller
+      - enum:
+          - allwinner,sun4i-a10-sram-controller
+          - allwinner,sun50i-a64-sram-controller
         deprecated: true
-      - const: allwinner,sun4i-a10-system-control
-      - const: allwinner,sun5i-a13-system-control
+      - enum:
+          - allwinner,sun4i-a10-system-control
+          - allwinner,sun5i-a13-system-control
+          - allwinner,sun8i-a23-system-control
+          - allwinner,sun8i-h3-system-control
+          - allwinner,sun20i-d1-system-control
+          - allwinner,sun50i-a64-system-control
+          - allwinner,sun50i-h5-system-control
+          - allwinner,sun50i-h616-system-control
       - items:
-        - const: allwinner,sun7i-a20-system-control
-        - const: allwinner,sun4i-a10-system-control
-      - const: allwinner,sun8i-a23-system-control
-      - const: allwinner,sun8i-h3-system-control
-      - const: allwinner,sun50i-a64-sram-controller
-        deprecated: true
-      - const: allwinner,sun50i-a64-system-control
-      - const: allwinner,sun50i-h5-system-control
+          - enum:
+              - allwinner,suniv-f1c100s-system-control
+              - allwinner,sun7i-a20-system-control
+              - allwinner,sun8i-r40-system-control
+          - const: allwinner,sun4i-a10-system-control
       - items:
-        - const: allwinner,sun50i-h6-system-control
-        - const: allwinner,sun50i-a64-system-control
+          - const: allwinner,sun8i-v3s-system-control
+          - const: allwinner,sun8i-h3-system-control
       - items:
-        - const: allwinner,suniv-f1c100s-system-control
-        - const: allwinner,sun4i-a10-system-control
+          - const: allwinner,sun50i-h6-system-control
+          - const: allwinner,sun50i-a64-system-control
 
   reg:
     maxItems: 1
@@ -69,44 +75,30 @@ patternProperties:
               - const: allwinner,sun4i-a10-sram-d
               - const: allwinner,sun50i-a64-sram-c
               - items:
-                - const: allwinner,sun5i-a13-sram-a3-a4
-                - const: allwinner,sun4i-a10-sram-a3-a4
-              - items:
-                - const: allwinner,sun7i-a20-sram-a3-a4
-                - const: allwinner,sun4i-a10-sram-a3-a4
-              - items:
-                - const: allwinner,sun5i-a13-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                - const: allwinner,sun7i-a20-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                - const: allwinner,sun8i-a23-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                - const: allwinner,sun8i-h3-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                - const: allwinner,sun50i-a64-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                - const: allwinner,sun50i-h5-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                - const: allwinner,sun50i-h6-sram-c1
-                - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                - const: allwinner,sun5i-a13-sram-d
-                - const: allwinner,sun4i-a10-sram-d
+                  - enum:
+                      - allwinner,sun5i-a13-sram-a3-a4
+                      - allwinner,sun7i-a20-sram-a3-a4
+                  - const: allwinner,sun4i-a10-sram-a3-a4
               - items:
-                - const: allwinner,sun7i-a20-sram-d
-                - const: allwinner,sun4i-a10-sram-d
+                  - enum:
+                      - allwinner,sun5i-a13-sram-c1
+                      - allwinner,sun7i-a20-sram-c1
+                      - allwinner,sun8i-a23-sram-c1
+                      - allwinner,sun8i-h3-sram-c1
+                      - allwinner,sun8i-r40-sram-c1
+                      - allwinner,sun50i-a64-sram-c1
+                      - allwinner,sun50i-h5-sram-c1
+                      - allwinner,sun50i-h6-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
               - items:
-                - const: allwinner,suniv-f1c100s-sram-d
-                - const: allwinner,sun4i-a10-sram-d
+                  - enum:
+                      - allwinner,suniv-f1c100s-sram-d
+                      - allwinner,sun5i-a13-sram-d
+                      - allwinner,sun7i-a20-sram-d
+                  - const: allwinner,sun4i-a10-sram-d
               - items:
-                - const: allwinner,sun50i-h6-sram-c
-                - const: allwinner,sun50i-a64-sram-c
+                  - const: allwinner,sun50i-h6-sram-c
+                  - const: allwinner,sun50i-a64-sram-c
 
 required:
   - "#address-cells"
diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
new file mode 100644
index 000000000000..e9199190198d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/qcom,imem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IMEM memory region
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm IMEM is dedicated memory region for various debug features and DMA
+  transactions.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,apq8064-imem
+          - qcom,msm8974-imem
+          - qcom,qcs404-imem
+          - qcom,sc7180-imem
+          - qcom,sc7280-imem
+          - qcom,sdm630-imem
+          - qcom,sdm845-imem
+          - qcom,sdx55-imem
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  reboot-mode:
+    $ref: /schemas/power/reset/syscon-reboot-mode.yaml#
+
+patternProperties:
+  "^pil-reloc@[0-9a-f]+$":
+    $ref: /schemas/remoteproc/qcom,pil-info.yaml#
+    description: Peripheral image loader relocation region
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@146bf000 {
+            compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
+            reg = <0 0x146bf000 0 0x1000>;
+            ranges = <0 0 0x146bf000 0x1000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            pil-reloc@94c {
+                compatible = "qcom,pil-reloc-info";
+                reg = <0x94c 0xc8>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
index 222990f9923c..071f2d676196 100644
--- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
+++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
@@ -43,6 +43,9 @@ properties:
   '#size-cells':
     const: 1
 
+  ranges:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -51,9 +54,12 @@ required:
   - clock-names
   - '#address-cells'
   - '#size-cells'
+  - ranges
+
+additionalProperties: false
 
 patternProperties:
-  "^.+-sram$":
+  "-sram@[0-9a-f]+$":
     type: object
     description: A region of reserved memory.
 
@@ -61,19 +67,15 @@ patternProperties:
       reg:
         maxItems: 1
 
-      ranges:
-        maxItems: 1
-
     required:
       - reg
-      - ranges
 
 examples:
   - |
-      #include <dt-bindings/clock/qcom,rpmcc.h>
-      #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
 
-      ocmem: ocmem@fdd00000 {
+    sram@fdd00000 {
         compatible = "qcom,msm8974-ocmem";
 
         reg = <0xfdd00000 0x2000>,
@@ -88,9 +90,9 @@ examples:
 
         #address-cells = <1>;
         #size-cells = <1>;
+        ranges = <0 0xfec00000 0x100000>;
 
         gmu-sram@0 {
-                reg = <0x0 0x100000>;
-                ranges = <0 0 0xfec00000 0x100000>;
+            reg = <0x0 0x100000>;
         };
-      };
+    };
diff --git a/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt b/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt
deleted file mode 100644
index 6b42fda306ff..000000000000
--- a/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Rockchip SRAM for pmu:
-------------------------------
-
-The sram of pmu is used to store the function of resume from maskrom(the 1st
-level loader). This is a common use of the "pmu-sram" because it keeps power
-even in low power states in the system.
-
-Required node properties:
-- compatible : should be "rockchip,rk3288-pmu-sram"
-- reg : physical base address and the size of the registers window
-
-Example:
-	sram@ff720000 {
-		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
-		reg = <0xff720000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
index 7b83cc6c9bfa..993430be355b 100644
--- a/Documentation/devicetree/bindings/sram/sram.yaml
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -28,12 +28,20 @@ properties:
     contains:
       enum:
         - mmio-sram
+        - amlogic,meson-gxbb-sram
+        - arm,juno-sram-ns
         - atmel,sama5d2-securam
+        - nvidia,tegra186-sysram
+        - nvidia,tegra194-sysram
+        - nvidia,tegra234-sysram
+        - qcom,rpm-msg-ram
+        - rockchip,rk3288-pmu-sram
 
   reg:
     maxItems: 1
 
   clocks:
+    maxItems: 1
     description:
       A list of phandle and clock specifier pair that controls the single
       SRAM clock.
@@ -45,6 +53,7 @@ properties:
     const: 1
 
   ranges:
+    maxItems: 1
     description:
       Should translate from local addresses within the sram to bus addresses.
 
@@ -55,7 +64,7 @@ properties:
     type: boolean
 
 patternProperties:
-  "^([a-z]*-)?sram(-section)?@[a-f0-9]+$":
+  "^([a-z0-9]*-)?sram(-section)?@[a-f0-9]+$":
     type: object
     description:
       Each child of the sram node specifies a region of reserved memory.
@@ -71,8 +80,15 @@ patternProperties:
             - allwinner,sun4i-a10-sram-d
             - allwinner,sun9i-a80-smp-sram
             - allwinner,sun50i-a64-sram-c
+            - amlogic,meson8-ao-arc-sram
+            - amlogic,meson8b-ao-arc-sram
             - amlogic,meson8-smp-sram
             - amlogic,meson8b-smp-sram
+            - amlogic,meson-gxbb-scp-shmem
+            - amlogic,meson-axg-scp-shmem
+            - arm,juno-scp-shmem
+            - arm,scmi-shmem
+            - arm,scp-shmem
             - renesas,smp-sram
             - rockchip,rk3066-smp-sram
             - samsung,exynos4210-sysram
@@ -118,9 +134,20 @@ patternProperties:
 required:
   - compatible
   - reg
-  - "#address-cells"
-  - "#size-cells"
-  - ranges
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - qcom,rpm-msg-ram
+            - rockchip,rk3288-pmu-sram
+then:
+  required:
+    - "#address-cells"
+    - "#size-cells"
+    - ranges
 
 additionalProperties: false
 
@@ -224,6 +251,16 @@ examples:
     };
 
   - |
+    // Rockchip's rk3288 SoC uses the sram of pmu to store the function of
+    // resume from maskrom(the 1st level loader). This is a common use of
+    // the "pmu-sram" because it keeps power even in low power states
+    // in the system.
+    sram@ff720000 {
+      compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+      reg = <0xff720000 0x1000>;
+    };
+
+  - |
     // Allwinner's A80 SoC uses part of the secure sram for hotplugging of the
     // primary core (cpu0). Once the core gets powered up it checks if a magic
     // value is set at a specific location. If it is then the BROM will jump
diff --git a/Documentation/devicetree/bindings/submitting-patches.rst b/Documentation/devicetree/bindings/submitting-patches.rst
new file mode 100644
index 000000000000..36a17b250ccc
--- /dev/null
+++ b/Documentation/devicetree/bindings/submitting-patches.rst
@@ -0,0 +1,96 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================================
+Submitting Devicetree (DT) binding patches
+==========================================
+
+I. For patch submitters
+=======================
+
+  0) Normal patch submission rules from
+     Documentation/process/submitting-patches.rst applies.
+
+  1) The Documentation/ and include/dt-bindings/ portion of the patch should
+     be a separate patch. The preferred subject prefix for binding patches is::
+
+       "dt-bindings: <binding dir>: ..."
+
+     The 80 characters of the subject are precious. It is recommended to not
+     use "Documentation" or "doc" because that is implied. All bindings are
+     docs. Repeating "binding" again should also be avoided.
+
+  2) DT binding files are written in DT schema format using json-schema
+     vocabulary and YAML file format. The DT binding files must pass validation
+     by running::
+
+       make dt_binding_check
+
+     See Documentation/devicetree/bindings/writing-schema.rst for more details
+     about schema and tools setup.
+
+  3) DT binding files should be dual licensed. The preferred license tag is
+     (GPL-2.0-only OR BSD-2-Clause).
+
+  4) Submit the entire series to the devicetree mailinglist at
+
+       devicetree@vger.kernel.org
+
+     and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify
+     all of the DT maintainers.
+
+  5) The Documentation/ portion of the patch should come in the series before
+     the code implementing the binding.
+
+  6) Any compatible strings used in a chip or board DTS file must be
+     previously documented in the corresponding DT binding text file
+     in Documentation/devicetree/bindings.  This rule applies even if
+     the Linux device driver does not yet match on the compatible
+     string.  [ checkpatch will emit warnings if this step is not
+     followed as of commit bff5da4335256513497cc8c79f9a9d1665e09864
+     ("checkpatch: add DT compatible string documentation checks"). ]
+
+  7) The wildcard "<chip>" may be used in compatible strings, as in
+     the following example:
+
+         - compatible: Must contain '"nvidia,<chip>-pcie",
+           "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
+
+     As in the above example, the known values of "<chip>" should be
+     documented if it is used.
+
+  8) If a documented compatible string is not yet matched by the
+     driver, the documentation should also include a compatible
+     string that is matched by the driver (as in the "nvidia,tegra20-pcie"
+     example above).
+
+  9) Bindings are actively used by multiple projects other than the Linux
+     Kernel, extra care and consideration may need to be taken when making changes
+     to existing bindings.
+
+II. For kernel maintainers
+==========================
+
+  1) If you aren't comfortable reviewing a given binding, reply to it and ask
+     the devicetree maintainers for guidance.  This will help them prioritize
+     which ones to review and which ones are ok to let go.
+
+  2) For driver (not subsystem) bindings: If you are comfortable with the
+     binding, and it hasn't received an Acked-by from the devicetree
+     maintainers after a few weeks, go ahead and take it.
+
+     For subsystem bindings (anything affecting more than a single device),
+     getting a devicetree maintainer to review it is required.
+
+  3) For a series going though multiple trees, the binding patch should be
+     kept with the driver using the binding.
+
+III. Notes
+==========
+
+  0) Please see Documentation/devicetree/bindings/ABI.rst for details
+     regarding devicetree ABI.
+
+  1) This document is intended as a general familiarization with the process as
+     decided at the 2013 Kernel Summit.  When in doubt, the current word of the
+     devicetree maintainers overrules this document.  In that situation, a patch
+     updating this document would be appreciated.
diff --git a/Documentation/devicetree/bindings/submitting-patches.txt b/Documentation/devicetree/bindings/submitting-patches.txt
deleted file mode 100644
index 98bee6240b65..000000000000
--- a/Documentation/devicetree/bindings/submitting-patches.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-
-  Submitting devicetree (DT) binding patches
-
-I. For patch submitters
-
-  0) Normal patch submission rules from Documentation/process/submitting-patches.rst
-     applies.
-
-  1) The Documentation/ and include/dt-bindings/ portion of the patch should
-     be a separate patch. The preferred subject prefix for binding patches is:
-
-       "dt-bindings: <binding dir>: ..."
-
-     The 80 characters of the subject are precious. It is recommended to not
-     use "Documentation" or "doc" because that is implied. All bindings are
-     docs. Repeating "binding" again should also be avoided.
-
-  2) DT binding files are written in DT schema format using json-schema
-     vocabulary and YAML file format. The DT binding files must pass validation
-     by running:
-
-       make dt_binding_check
-
-     See ../writing-schema.rst for more details about schema and tools setup.
-
-  3) DT binding files should be dual licensed. The preferred license tag is
-     (GPL-2.0-only OR BSD-2-Clause).
-
-  4) Submit the entire series to the devicetree mailinglist at
-
-       devicetree@vger.kernel.org
-
-     and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify
-     all of the DT maintainers.
-
-  5) The Documentation/ portion of the patch should come in the series before
-     the code implementing the binding.
-
-  6) Any compatible strings used in a chip or board DTS file must be
-     previously documented in the corresponding DT binding text file
-     in Documentation/devicetree/bindings.  This rule applies even if
-     the Linux device driver does not yet match on the compatible
-     string.  [ checkpatch will emit warnings if this step is not
-     followed as of commit bff5da4335256513497cc8c79f9a9d1665e09864
-     ("checkpatch: add DT compatible string documentation checks"). ]
-
-  7) The wildcard "<chip>" may be used in compatible strings, as in
-     the following example:
-
-         - compatible: Must contain '"nvidia,<chip>-pcie",
-           "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
-
-     As in the above example, the known values of "<chip>" should be
-     documented if it is used.
-
-  8) If a documented compatible string is not yet matched by the
-     driver, the documentation should also include a compatible
-     string that is matched by the driver (as in the "nvidia,tegra20-pcie"
-     example above).
-
-
-II. For kernel maintainers
-
-  1) If you aren't comfortable reviewing a given binding, reply to it and ask
-     the devicetree maintainers for guidance.  This will help them prioritize
-     which ones to review and which ones are ok to let go.
-
-  2) For driver (not subsystem) bindings: If you are comfortable with the
-     binding, and it hasn't received an Acked-by from the devicetree
-     maintainers after a few weeks, go ahead and take it.
-
-     Subsystem bindings (anything affecting more than a single device)
-     then getting a devicetree maintainer to review it is required.
-
-  3) For a series going though multiple trees, the binding patch should be
-     kept with the driver using the binding.
-
-III. Notes
-
-  0) Please see ...bindings/ABI.txt for details regarding devicetree ABI.
-
-  1) This document is intended as a general familiarization with the process as
-     decided at the 2013 Kernel Summit.  When in doubt, the current word of the
-     devicetree maintainers overrules this document.  In that situation, a patch
-     updating this document would be appreciated.
diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index 87369264feb9..fbd4212285e2 100644
--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/thermal/allwinner,sun8i-a83t-ths.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner SUN8I Thermal Controller Device Tree Bindings
+title: Allwinner SUN8I Thermal Controller
 
 maintainers:
   - Vasily Khoruzhick <anarsoul@gmail.com>
@@ -17,19 +17,18 @@ properties:
       - allwinner,sun8i-h3-ths
       - allwinner,sun8i-r40-ths
       - allwinner,sun50i-a64-ths
+      - allwinner,sun50i-a100-ths
       - allwinner,sun50i-h5-ths
       - allwinner,sun50i-h6-ths
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: Bus Clock
       - description: Module Clock
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: bus
       - const: mod
@@ -50,7 +49,7 @@ properties:
   nvmem-cell-names:
     const: calibration
 
-  # See ./thermal.txt for details
+  # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
   "#thermal-sensor-cells":
     enum:
       - 0
@@ -61,7 +60,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: allwinner,sun50i-h6-ths
+            enum:
+              - allwinner,sun50i-a100-ths
+              - allwinner,sun50i-h6-ths
 
     then:
       properties:
@@ -100,11 +101,12 @@ allOf:
         compatible:
           contains:
             enum:
-              - const: allwinner,sun8i-h3-ths
-              - const: allwinner,sun8i-r40-ths
-              - const: allwinner,sun50i-a64-ths
-              - const: allwinner,sun50i-h5-ths
-              - const: allwinner,sun50i-h6-ths
+              - allwinner,sun8i-h3-ths
+              - allwinner,sun8i-r40-ths
+              - allwinner,sun50i-a64-ths
+              - allwinner,sun50i-a100-ths
+              - allwinner,sun50i-h5-ths
+              - allwinner,sun50i-h6-ths
 
     then:
       required:
diff --git a/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt
index 703979dbd577..12fc4ef04837 100644
--- a/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt
@@ -6,7 +6,7 @@ transaction.
 Required properties:
 - compatible: "amazon,al-thermal".
 - reg: The physical base address and length of the sensor's registers.
-- #thermal-sensor-cells: Must be 1. See ./thermal.txt for a description.
+- #thermal-sensor-cells: Must be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
 
 Example:
 	thermal: thermal {
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index f761681e4c0d..999c6b365f1d 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -13,11 +13,11 @@ description: Binding for Amlogic Thermal
 
 properties:
   compatible:
-      items:
-        - enum:
-            - amlogic,g12a-cpu-thermal
-            - amlogic,g12a-ddr-thermal
-        - const: amlogic,g12a-thermal
+    items:
+      - enum:
+          - amlogic,g12a-cpu-thermal
+          - amlogic,g12a-ddr-thermal
+      - const: amlogic,g12a-thermal
 
   reg:
     maxItems: 1
@@ -32,6 +32,8 @@ properties:
     description: phandle to the ao-secure syscon
     $ref: '/schemas/types.yaml#/definitions/phandle'
 
+  '#thermal-sensor-cells':
+    const: 0
 
 required:
   - compatible
@@ -40,6 +42,8 @@ required:
   - clocks
   - amlogic,ao-secure
 
+additionalProperties: false
+
 examples:
   - |
         cpu_temp: temperature-sensor@ff634800 {
diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
index f3b441100890..b0bee7e42038 100644
--- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
@@ -12,7 +12,7 @@ Required properties:
 
 Note: these bindings are deprecated for AP806/CP110 and should instead
 follow the rules described in:
-Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
 Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
 
 - reg: Device's register space.
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
index f3e68ed03abf..89a2c32c0ab2 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
@@ -16,14 +16,14 @@ description: |+
   - compatible: Should be one of the following:
                 "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
   compatible:
     const: brcm,bcm2711-thermal
 
-  # See ./thermal.txt for details
+  # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
   "#thermal-sensor-cells":
     const: 0
 
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
deleted file mode 100644
index 74a9ef09db8b..000000000000
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Broadcom STB thermal management
-
-Thermal management core, provided by the AVS TMON hardware block.
-
-Required properties:
-- compatible: must be one of:
-	"brcm,avs-tmon-bcm7216"
-	"brcm,avs-tmon-bcm7445"
-	"brcm,avs-tmon"
-- reg: address range for the AVS TMON registers
-- interrupts: temperature monitor interrupt, for high/low threshold triggers,
-	      required except for "brcm,avs-tmon-bcm7216"
-- interrupt-names: should be "tmon"
-
-Example:
-
-	thermal@f04d1500 {
-		compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
-		reg = <0xf04d1500 0x28>;
-		interrupts = <0x6>;
-		interrupt-names = "tmon";
-		interrupt-parent = <&avs_host_l2_intc>;
-	};
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
new file mode 100644
index 000000000000..267a0f423504
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,avs-tmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB thermal management
+
+description: Thermal management core, provided by the AVS TMON hardware block.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,avs-tmon-bcm7216
+          - brcm,avs-tmon-bcm7445
+      - const: brcm,avs-tmon
+
+  reg:
+    maxItems: 1
+    description: >
+      Address range for the AVS TMON registers
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: tmon
+
+  "#thermal-sensor-cells":
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#thermal-sensor-cells"
+
+examples:
+  - |
+     thermal@f04d1500 {
+          compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
+          reg = <0xf04d1500 0x28>;
+          interrupts = <0x6>;
+          interrupt-names = "tmon";
+          interrupt-parent = <&avs_host_l2_intc>;
+          #thermal-sensor-cells = <0>;
+     };
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
index da8c5b73ad10..a3e9ec5dc7ac 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
@@ -7,7 +7,7 @@ compatible: 		should be one of: "brcm,bcm2835-thermal",
 			"brcm,bcm2836-thermal" or "brcm,bcm2837-thermal"
 reg:			Address range of the thermal registers.
 clocks: 		Phandle of the clock used by the thermal sensor.
-#thermal-sensor-cells:	should be 0 (see thermal.txt)
+#thermal-sensor-cells:	should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml)
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt
deleted file mode 100644
index 68e047170039..000000000000
--- a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Broadcom Northstar Thermal
-
-This binding describes thermal sensor that is part of Northstar's DMU (Device
-Management Unit).
-
-Required properties:
-- compatible : Must be "brcm,ns-thermal"
-- reg : iomem address range of PVTMON registers
-- #thermal-sensor-cells : Should be <0>
-
-Example:
-
-thermal: thermal@1800c2c0 {
-	compatible = "brcm,ns-thermal";
-	reg = <0x1800c2c0 0x10>;
-	#thermal-sensor-cells = <0>;
-};
-
-thermal-zones {
-	cpu_thermal: cpu-thermal {
-		polling-delay-passive = <0>;
-		polling-delay = <1000>;
-		coefficients = <(-556) 418000>;
-		thermal-sensors = <&thermal>;
-
-		trips {
-			cpu-crit {
-				temperature	= <125000>;
-				hysteresis	= <0>;
-				type		= "critical";
-			};
-		};
-
-		cooling-maps {
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
new file mode 100644
index 000000000000..fdeb333e010d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,ns-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar Thermal
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+  Thermal sensor that is part of Northstar's DMU (Device Management Unit).
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    const: brcm,ns-thermal
+
+  reg:
+    description: PVTMON registers range
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+unevaluatedProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    thermal: thermal@1800c2c0 {
+        compatible = "brcm,ns-thermal";
+        reg = <0x1800c2c0 0x10>;
+        #thermal-sensor-cells = <0>;
+    };
+
+    thermal-zones {
+        cpu-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <1000>;
+            coefficients = <(-556) 418000>;
+            thermal-sensors = <&thermal>;
+
+            trips {
+                cpu-crit {
+                    temperature = <125000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
+            };
+
+            cooling-maps {
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
deleted file mode 100644
index 33004ce7e5df..000000000000
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ /dev/null
@@ -1,106 +0,0 @@
-* Exynos Thermal Management Unit (TMU)
-
-** Required properties:
-
-- compatible : One of the following:
-	       "samsung,exynos3250-tmu"
-	       "samsung,exynos4412-tmu"
-	       "samsung,exynos4210-tmu"
-	       "samsung,exynos5250-tmu"
-	       "samsung,exynos5260-tmu"
-	       "samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420
-	       "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
-			Exynos5420 (Must pass triminfo base and triminfo clock)
-               "samsung,exynos5433-tmu"
-	       "samsung,exynos7-tmu"
-- reg : Address range of the thermal registers. For soc's which has multiple
-	instances of TMU and some registers are shared across all TMU's like
-	interrupt related then 2 set of register has to supplied. First set
-	belongs	to register set of TMU instance and second set belongs to
-	registers shared with the TMU instance.
-
-  NOTE: On Exynos5420, the TRIMINFO register is misplaced for TMU
-	channels 2, 3 and 4
-	Use "samsung,exynos5420-tmu-ext-triminfo" in cases, there is a misplaced
-	register, also provide clock to access that base.
-
-	TRIMINFO at 0x1006c000 contains data for TMU channel 3
-	TRIMINFO at 0x100a0000 contains data for TMU channel 4
-	TRIMINFO at 0x10068000 contains data for TMU channel 2
-
-- interrupts : Should contain interrupt for thermal system
-- clocks : The main clocks for TMU device
-	-- 1. operational clock for TMU channel
-	-- 2. optional clock to access the shared registers of TMU channel
-	-- 3. optional special clock for functional operation
-- clock-names : Thermal system clock name
-	-- "tmu_apbif" operational clock for current TMU channel
-	-- "tmu_triminfo_apbif" clock to access the shared triminfo register
-		for current TMU channel
-	-- "tmu_sclk" clock for functional operation of the current TMU
-		channel
-
-The Exynos TMU supports generating interrupts when reaching given
-temperature thresholds. Number of supported thermal trip points depends
-on the SoC (only first trip points defined in DT will be configured):
- - most of SoC: 4
- - samsung,exynos5433-tmu: 8
- - samsung,exynos7-tmu: 8
-
-** Optional properties:
-
-- vtmu-supply: This entry is optional and provides the regulator node supplying
-		voltage to TMU. If needed this entry can be placed inside
-		board/platform specific dts file.
-
-Example 1):
-
-	tmu@100c0000 {
-		compatible = "samsung,exynos4412-tmu";
-		interrupt-parent = <&combiner>;
-		reg = <0x100C0000 0x100>;
-		interrupts = <2 4>;
-		clocks = <&clock 383>;
-		clock-names = "tmu_apbif";
-		vtmu-supply = <&tmu_regulator_node>;
-		#thermal-sensor-cells = <0>;
-	};
-
-Example 2): (In case of Exynos5420 "with misplaced TRIMINFO register")
-	tmu_cpu2: tmu@10068000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
-		interrupts = <0 184 0>;
-		clocks = <&clock 318>, <&clock 318>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#thermal-sensor-cells = <0>;
-	};
-
-	tmu_cpu3: tmu@1006c000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
-		interrupts = <0 185 0>;
-		clocks = <&clock 318>, <&clock 319>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#thermal-sensor-cells = <0>;
-	};
-
-	tmu_gpu: tmu@100a0000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
-		interrupts = <0 215 0>;
-		clocks = <&clock 319>, <&clock 318>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#thermal-sensor-cells = <0>;
-	};
-
-Note: For multi-instance tmu each instance should have an alias correctly
-numbered in "aliases" node.
-
-Example:
-
-aliases {
-	tmuctrl0 = &tmuctrl_0;
-	tmuctrl1 = &tmuctrl_1;
-	tmuctrl2 = &tmuctrl_2;
-};
diff --git a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml
new file mode 100644
index 000000000000..f9e4b3c8d0ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/fsl,scu-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Thermal bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8qxp-sc-thermal
+      - const: fsl,imx-sc-thermal
+
+  '#thermal-sensor-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    thermal-sensor {
+        compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+        #thermal-sensor-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt
index cef716a236f1..4b19d80e6558 100644
--- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt
@@ -9,7 +9,7 @@
   by /SOCTHERM/tsensor.
 - clock-names: Input clock name, should be 'thermal_clk'.
 - clocks: phandles for clock specified in "clock-names" property.
-- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description.
+- #thermal-sensor-cells: Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
 
 Example :
 
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
deleted file mode 100644
index 823e4176eef8..000000000000
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
-
-Required properties:
-- compatible : must be one of following:
-  - "fsl,imx6q-tempmon" for i.MX6Q,
-  - "fsl,imx6sx-tempmon" for i.MX6SX,
-  - "fsl,imx7d-tempmon" for i.MX7S/D.
-- interrupts : the interrupt output of the controller:
-  i.MX6Q has one IRQ which will be triggered when temperature is higher than high threshold,
-  i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC,
-  when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature
-  is higher than panic threshold, system will auto reboot by SRC module.
-- fsl,tempmon : phandle pointer to system controller that contains TEMPMON
-  control registers, e.g. ANATOP on imx6q.
-- nvmem-cells: A phandle to the calibration cells provided by ocotp.
-- nvmem-cell-names: Should be "calib", "temp_grade".
-
-Deprecated properties:
-- fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
-  calibration data, e.g. OCOTP on imx6q.  The details about calibration data
-  can be found in SoC Reference Manual.
-
-Direct access to OCOTP via fsl,tempmon-data is incorrect on some newer chips
-because it does not handle OCOTP clock requirements.
-
-Optional properties:
-- clocks : thermal sensor's clock source.
-
-Example:
-ocotp: ocotp@21bc000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,imx6sx-ocotp", "syscon";
-	reg = <0x021bc000 0x4000>;
-	clocks = <&clks IMX6SX_CLK_OCOTP>;
-
-	tempmon_calib: calib@38 {
-		reg = <0x38 4>;
-	};
-
-	tempmon_temp_grade: temp-grade@20 {
-		reg = <0x20 4>;
-	};
-};
-
-tempmon: tempmon {
-	compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
-	interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,tempmon = <&anatop>;
-	nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-	nvmem-cell-names = "calib", "temp_grade";
-	clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
-};
-
-Legacy method (Deprecated):
-tempmon {
-	compatible = "fsl,imx6q-tempmon";
-	fsl,tempmon = <&anatop>;
-	fsl,tempmon-data = <&ocotp>;
-	clocks = <&clks 172>;
-};
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
new file mode 100644
index 000000000000..16b57f57d103
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/imx-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX Thermal Binding
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6q-tempmon
+      - fsl,imx6sx-tempmon
+      - fsl,imx7d-tempmon
+
+  interrupts:
+    description: |
+      The interrupt output of the controller, i.MX6Q has IRQ_HIGH which
+      will be triggered when temperature is higher than high threshold,
+      i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW
+      and the other is IRQ_PANIC, when temperature is lower than low
+      threshold, IRQ_LOW will be triggered, when temperature is higher
+      than panic threshold, IRQ_PANIC will be triggered, and system can
+      be configured to auto reboot by SRC module for IRQ_PANIC. IRQ_HIGH,
+      IRQ_LOW and IRQ_PANIC share same interrupt output of controller.
+    maxItems: 1
+
+  nvmem-cells:
+    items:
+      - description: Phandle to the calibration data provided by ocotp
+      - description: Phandle to the temperature grade provided by ocotp
+
+  nvmem-cell-names:
+    items:
+      - const: calib
+      - const: temp_grade
+
+  fsl,tempmon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: Phandle to anatop system controller node.
+
+  fsl,tempmon-data:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: |
+      Deprecated property, phandle pointer to fuse controller that contains
+      TEMPMON calibration data, e.g. OCOTP on imx6q. The details about
+      calibration data can be found in SoC Reference Manual.
+    deprecated: true
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - fsl,tempmon
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6sx-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    efuse@21bc000 {
+         #address-cells = <1>;
+         #size-cells = <1>;
+         compatible = "fsl,imx6sx-ocotp", "syscon";
+         reg = <0x021bc000 0x4000>;
+         clocks = <&clks IMX6SX_CLK_OCOTP>;
+
+         tempmon_calib: calib@38 {
+             reg = <0x38 4>;
+         };
+
+         tempmon_temp_grade: temp-grade@20 {
+             reg = <0x20 4>;
+         };
+    };
+
+    anatop@20c8000 {
+        compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd";
+        reg = <0x020c8000 0x1000>;
+        interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 54 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+
+        tempmon {
+             compatible = "fsl,imx6sx-tempmon";
+             interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+             fsl,tempmon = <&anatop>;
+             nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+             nvmem-cell-names = "calib", "temp_grade";
+             clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
new file mode 100644
index 000000000000..89c54e08ee61
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/imx8mm-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Mini Thermal Binding
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  i.MX8MM has TMU IP to allow temperature measurement, there are
+  currently two distinct major versions of the IP that is supported
+  by a single driver. The IP versions are named v1 and v2, v1 is
+  for i.MX8MM which has ONLY 1 sensor, v2 is for i.MX8MP which has
+  2 sensors.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8mm-tmu
+          - fsl,imx8mp-tmu
+      - items:
+          - const: fsl,imx8mn-tmu
+          - const: fsl,imx8mm-tmu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    description: |
+      Number of cells required to uniquely identify the thermal
+      sensors, 0 for ONLY one sensor and 1 for multiple sensors.
+    enum:
+      - 0
+      - 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+
+    thermal-sensor@30260000 {
+         compatible = "fsl,imx8mm-tmu";
+         reg = <0x30260000 0x10000>;
+         clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+         #thermal-sensor-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/thermal/max77620_thermal.txt b/Documentation/devicetree/bindings/thermal/max77620_thermal.txt
index 323a3b3822aa..82ed5d487966 100644
--- a/Documentation/devicetree/bindings/thermal/max77620_thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/max77620_thermal.txt
@@ -8,12 +8,12 @@ below threshold level.
 
 Required properties:
 -------------------
-#thermal-sensor-cells:	Please refer <devicetree/bindings/thermal/thermal.txt>
-			for more details.
+#thermal-sensor-cells:	For more details, please refer to
+			<devicetree/bindings/thermal/thermal-sensor.yaml>
 			The value must be 0.
 
 For more details, please refer generic thermal DT binding document
-<devicetree/bindings/thermal/thermal.txt>.
+<devicetree/bindings/thermal/thermal*.yaml>.
 
 Please refer <devicetree/bindings/mfd/max77620.txt> for mfd DT binding
 document for the MAX77620.
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
index f8d7831f3974..5c7e7bdd029a 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
@@ -14,18 +14,19 @@ Required properties:
   - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
   - "mediatek,mt7622-thermal" : For MT7622 SoC
   - "mediatek,mt8183-thermal" : For MT8183 family of SoCs
+  - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs
 - reg: Address range of the thermal controller
 - interrupts: IRQ for the thermal controller
 - clocks, clock-names: Clocks needed for the thermal controller. required
                        clocks are:
 		       "therm":	 Main clock needed for register access
 		       "auxadc": The AUXADC clock
-- resets: Reference to the reset controller controlling the thermal controller.
 - mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
 - mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
-- #thermal-sensor-cells : Should be 0. See ./thermal.txt for a description.
+- #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
 
 Optional properties:
+- resets: Reference to the reset controller controlling the thermal controller.
 - nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
                unspecified default values shall be used.
 - nvmem-cell-names: Should be "calibration-data"
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
index f02f38527a6b..aea4a2a178b9 100644
--- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
@@ -28,9 +28,10 @@ Required properties :
   See ../reset/reset.txt for details.
 - reset-names : Must include the following entries:
   - soctherm
-- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description
-    of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a
-    list of valid values when referring to thermal sensors.
+- #thermal-sensor-cells : Should be 1. For a description of this property, see
+     Documentation/devicetree/bindings/thermal/thermal-sensor.yaml.
+    See <dt-bindings/thermal/tegra124-soctherm.h> for a list of valid values
+    when referring to thermal sensors.
 - throttle-cfgs: A sub-node which is a container of configuration for each
     hardware throttle events. These events can be set as cooling devices.
   * throttle events: Sub-nodes must be named as "light" or "heavy".
@@ -62,7 +63,8 @@ Required properties :
         TEGRA_SOCTHERM_THROT_LEVEL_MED (75%),
         TEGRA_SOCTHERM_THROT_LEVEL_HIGH (85%).
       - #cooling-cells: Should be 1. This cooling device only support on/off state.
-        See ./thermal.txt for a description of this property.
+        For a description of this property see:
+	Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
 
       Optional properties: The following properties are T210 specific and
       valid only for OCx throttle events.
@@ -94,7 +96,7 @@ critical trip point is reported back to the thermal framework to implement
 software shutdown.
 
 - the "hot" type trip points will be set to SOC_THERM hardware as the throttle
-temperature. Once the the temperature of this thermal zone is higher
+temperature. Once the temperature of this thermal zone is higher
 than it, it will trigger the HW throttle event.
 
 Example :
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt
deleted file mode 100644
index e17c07be270b..000000000000
--- a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-NVIDIA Tegra186 BPMP thermal sensor
-
-In Tegra186, the BPMP (Boot and Power Management Processor) implements an
-interface that is used to read system temperatures, including CPU cluster
-and GPU temperatures. This binding describes the thermal sensor that is
-exposed by BPMP.
-
-The BPMP thermal node must be located directly inside the main BPMP node. See
-../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding.
-
-This node represents a thermal sensor. See thermal.txt for details of the
-core thermal binding.
-
-Required properties:
-- compatible:
-    Array of strings.
-    One of:
-    - "nvidia,tegra186-bpmp-thermal"
-    - "nvidia,tegra194-bpmp-thermal"
-- #thermal-sensor-cells: Cell for sensor index.
-    Single-cell integer.
-    Must be <1>.
-
-Example:
-
-bpmp {
-	...
-
-	bpmp_thermal: thermal {
-		compatible = "nvidia,tegra186-bpmp-thermal";
-		#thermal-sensor-cells = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml
new file mode 100644
index 000000000000..c91fd07e4061
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/nvidia,tegra186-bpmp-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) BPMP thermal sensor
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  In Tegra186, the BPMP (Boot and Power Management Processor) implements
+  an interface that is used to read system temperatures, including CPU
+  cluster and GPU temperatures. This binding describes the thermal
+  sensor that is exposed by BPMP.
+
+  The BPMP thermal node must be located directly inside the main BPMP
+  node. See ../firmware/nvidia,tegra186-bpmp.yaml for details of the
+  BPMP binding.
+
+  This node represents a thermal sensor. See
+
+    Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
+
+  for details of the core thermal binding.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-bpmp-thermal
+      - nvidia,tegra194-bpmp-thermal
+
+  '#thermal-sensor-cells':
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of cells needed in the phandle specifier to
+      identify a given sensor. Must be 1 and the single cell specifies
+      the sensor index.
+    const: 1
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml
new file mode 100644
index 000000000000..a35da257b070
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/nvidia,tegra30-tsensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 Thermal Sensor
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  TSENSOR provides thermal and voltage sensors which monitor temperature
+  and voltage of the chip. Sensors are placed across the die to gauge the
+  temperature of the whole chip. The TSENSOR module:
+
+    Generates an interrupt to SW to lower temperature via DVFS on reaching
+    a certain thermal/voltage threshold.
+
+    Generates a signal to the CAR to reduce CPU frequency by half on reaching
+    a certain thermal/voltage threshold.
+
+    Generates a signal to the PMC when the temperature reaches dangerously high
+    levels to reset the chip and sets a flag in the PMC.
+
+  TSENSOR has two channels which monitor two different spots of the SoC.
+
+properties:
+  compatible:
+    const: nvidia,tegra30-tsensor
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - interrupts
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    thermal-sensor@70014000 {
+      compatible = "nvidia,tegra30-tsensor";
+      reg = <0x70014000 0x500>;
+      interrupts = <0 102 4>;
+      clocks = <&clk 100>;
+      resets = <&rst 100>;
+
+      #thermal-sensor-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
new file mode 100644
index 000000000000..5f08b6e59b8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom,spmi-temp-alarm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QPNP PMIC Temperature Alarm
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips
+  that utilize the Qualcomm SPMI implementation. These peripherals provide an
+  interrupt signal and status register to identify high PMIC die temperature.
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    const: qcom,spmi-temp-alarm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  io-channels:
+    items:
+      - description: ADC channel, which reports chip die temperature
+
+  io-channel-names:
+    items:
+      - const: thermal
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pm8350_temp_alarm: temperature-sensor@a00 {
+            compatible = "qcom,spmi-temp-alarm";
+            reg = <0xa00>;
+            interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
+
+    thermal-zones {
+        pm8350_thermal: pm8350c-thermal {
+            polling-delay-passive = <100>;
+            polling-delay = <0>;
+            thermal-sensors = <&pm8350_temp_alarm>;
+
+            trips {
+                pm8350_trip0: trip0 {
+                    temperature = <95000>;
+                    hysteresis = <0>;
+                    type = "passive";
+                };
+
+                pm8350_crit: pm8350c-crit {
+                    temperature = <115000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
new file mode 100644
index 000000000000..e1587ddf7de3
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2021 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-lmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Limits Management Hardware(LMh)
+
+maintainers:
+  - Thara Gopinath <thara.gopinath@linaro.org>
+
+description:
+  Limits Management Hardware(LMh) is a hardware infrastructure on some
+  Qualcomm SoCs that can enforce temperature and current limits as
+  programmed by software for certain IPs like CPU.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8180x-lmh
+      - qcom,sdm845-lmh
+      - qcom,sm8150-lmh
+
+  reg:
+    items:
+      - description: core registers
+
+  interrupts:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  cpus:
+    description:
+      phandle of the first cpu in the LMh cluster
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  qcom,lmh-temp-arm-millicelsius:
+    description:
+      An integer expressing temperature threshold at which the LMh thermal
+      FSM is engaged.
+
+  qcom,lmh-temp-low-millicelsius:
+    description:
+      An integer expressing temperature threshold at which the state machine
+      will attempt to remove frequency throttling.
+
+  qcom,lmh-temp-high-millicelsius:
+    description:
+      An integer expressing temperature threshold at which the state machine
+      will attempt to throttle the frequency.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+  - cpus
+  - qcom,lmh-temp-arm-millicelsius
+  - qcom,lmh-temp-low-millicelsius
+  - qcom,lmh-temp-high-millicelsius
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    lmh@17d70800 {
+      compatible = "qcom,sdm845-lmh";
+      reg = <0x17d70800 0x400>;
+      interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+      cpus = <&CPU4>;
+      qcom,lmh-temp-arm-millicelsius = <65000>;
+      qcom,lmh-temp-low-millicelsius = <94500>;
+      qcom,lmh-temp-high-millicelsius = <95000>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
new file mode 100644
index 000000000000..8273ac55b63f
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm-hc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC ADC HC Thermal Monitoring
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+properties:
+  compatible:
+    const: qcom,spmi-adc-tm-hc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+    description:
+      Number of cells required to uniquely identify the thermal sensors. Since
+      we have multiple sensors this is set to 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,avg-samples:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of samples to be used for measurement.
+    enum:
+      - 1
+      - 2
+      - 4
+      - 8
+      - 16
+    default: 1
+
+  qcom,decimation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter is used to decrease ADC sampling rate.
+            Quicker measurements can be made by reducing decimation ratio.
+    enum:
+      - 256
+      - 512
+      - 1024
+    default: 1024
+
+patternProperties:
+  "^([-a-z0-9]*)@[0-7]$":
+    type: object
+    description:
+      Represent one thermal sensor.
+
+    properties:
+      reg:
+        description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
+        minimum: 0
+        maximum: 7
+
+      io-channels:
+        description:
+          From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
+
+      qcom,ratiometric:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Channel calibration type.
+          If this property is specified VADC will use the VDD reference
+          (1.875V) and GND for channel calibration. If property is not found,
+          channel will be calibrated with 0V and 1.25V reference channels,
+          also known as absolute calibration.
+
+      qcom,hw-settle-time-us:
+        description: Time between AMUX getting configured and the ADC starting conversion.
+        enum: [0, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, 6000, 8000, 10000]
+
+      qcom,pre-scaling:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: Used for scaling the channel input signal before the
+          signal is fed to VADC. The configuration for this node is to know the
+          pre-determined ratio and use it for post scaling. It is a pair of
+          integers, denoting the numerator and denominator of the fraction by
+          which input signal is multiplied. For example, <1 3> indicates the
+          signal is scaled down to 1/3 of its value before ADC measurement.  If
+          property is not found default value depending on chip will be used.
+        items:
+          - const: 1
+          - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+
+    required:
+      - reg
+      - io-channels
+
+    additionalProperties:
+      false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/qcom,spmi-vadc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spmi_bus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pm8998_adc: adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc-rev2";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other propreties are omitted */
+            adc-chan@4c {
+                reg = <ADC5_XO_THERM_100K_PU>;
+            };
+        };
+
+        pm8998_adc_tm: adc-tm@3400 {
+            compatible = "qcom,spmi-adc-tm-hc";
+            reg = <0x3400>;
+            interrupts = <0x2 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            thermistor@1 {
+                reg = <1>;
+                io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
new file mode 100644
index 000000000000..feb390d50696
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -0,0 +1,257 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC ADC Thermal Monitoring
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,spmi-adc-tm5
+      - qcom,spmi-adc-tm5-gen2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+    description:
+      Number of cells required to uniquely identify the thermal sensors. Since
+      we have multiple sensors this is set to 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,avg-samples:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of samples to be used for measurement.
+            Not applicable for Gen2 ADC_TM peripheral.
+    enum:
+      - 1
+      - 2
+      - 4
+      - 8
+      - 16
+    default: 1
+
+  qcom,decimation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter is used to decrease ADC sampling rate.
+            Quicker measurements can be made by reducing decimation ratio.
+            Not applicable for Gen2 ADC_TM peripheral.
+    enum:
+      - 250
+      - 420
+      - 840
+    default: 840
+
+patternProperties:
+  "^([-a-z0-9]*)@[0-7]$":
+    type: object
+    description:
+      Represent one thermal sensor.
+
+    properties:
+      reg:
+        description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
+        minimum: 0
+        maximum: 7
+
+      io-channels:
+        description:
+          From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
+
+      qcom,ratiometric:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Channel calibration type.
+          If this property is specified VADC will use the VDD reference
+          (1.875V) and GND for channel calibration. If property is not found,
+          channel will be calibrated with 0V and 1.25V reference channels,
+          also known as absolute calibration.
+
+      qcom,hw-settle-time-us:
+        description: Time between AMUX getting configured and the ADC starting conversion.
+        enum: [15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000]
+
+      qcom,pre-scaling:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: Used for scaling the channel input signal before the
+          signal is fed to VADC. The configuration for this node is to know the
+          pre-determined ratio and use it for post scaling. It is a pair of
+          integers, denoting the numerator and denominator of the fraction by
+          which input signal is multiplied. For example, <1 3> indicates the
+          signal is scaled down to 1/3 of its value before ADC measurement.  If
+          property is not found default value depending on chip will be used.
+        items:
+          - const: 1
+          - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+
+      qcom,avg-samples:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Number of samples to be used for measurement.
+          This property in child node is applicable only for Gen2 ADC_TM peripheral.
+        enum:
+          - 1
+          - 2
+          - 4
+          - 8
+          - 16
+        default: 1
+
+      qcom,decimation:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: This parameter is used to decrease ADC sampling rate.
+          Quicker measurements can be made by reducing decimation ratio.
+          This property in child node is applicable only for Gen2 ADC_TM peripheral.
+        enum:
+          - 85
+          - 340
+          - 1360
+        default: 1360
+
+    required:
+      - reg
+      - io-channels
+
+    additionalProperties:
+      false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-tm5
+
+    then:
+      patternProperties:
+        "^([-a-z0-9]*)@[0-7]$":
+          properties:
+            qcom,decimation: false
+            qcom,avg-samples: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-tm5-gen2
+
+    then:
+      properties:
+        qcom,avg-samples: false
+        qcom,decimation: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/qcom,spmi-vadc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spmi_bus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pm8150b_adc: adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc5";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other properties are omitted */
+            conn-therm@4f {
+                reg = <ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+
+        pm8150b_adc_tm: adc-tm@3500 {
+            compatible = "qcom,spmi-adc-tm5";
+            reg = <0x3500>;
+            interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            conn-therm@0 {
+                reg = <0>;
+                io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+    #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spmi_bus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmk8350_vadc: adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc7";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other properties are omitted */
+            xo-therm@44 {
+                reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+
+            conn-therm@47 {
+                reg = <PM8350_ADC7_AMUX_THM4_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+
+        pmk8350_adc_tm: adc-tm@3400 {
+            compatible = "qcom,spmi-adc-tm5-gen2";
+            reg = <0x3400>;
+            interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pmk8350-xo-therm@0 {
+                reg = <0>;
+                io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,decimation = <340>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+
+            conn-therm@1 {
+                reg = <1>;
+                io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>;
+                qcom,avg-samples = <2>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
deleted file mode 100644
index 0273a92a2a84..000000000000
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Qualcomm QPNP PMIC Temperature Alarm
-
-QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips
-that utilize the Qualcomm SPMI implementation. These peripherals provide an
-interrupt signal and status register to identify high PMIC die temperature.
-
-Required properties:
-- compatible:      Should contain "qcom,spmi-temp-alarm".
-- reg:             Specifies the SPMI address.
-- interrupts:      PMIC temperature alarm interrupt.
-- #thermal-sensor-cells: Should be 0. See thermal.txt for a description.
-
-Optional properties:
-- io-channels:     Should contain IIO channel specifier for the ADC channel,
-                   which report chip die temperature.
-- io-channel-names: Should contain "thermal".
-
-Example:
-
-	pm8941_temp: thermal-alarm@2400 {
-		compatible = "qcom,spmi-temp-alarm";
-		reg = <0x2400>;
-		interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
-		#thermal-sensor-cells = <0>;
-
-		io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
-		io-channel-names = "thermal";
-	};
-
-	thermal-zones {
-		pm8941 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&pm8941_temp>;
-
-			trips {
-				stage1 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				stage2 {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index eef13b9446a8..038d81338fcf 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: QCOM SoC Temperature Sensor (TSENS)
 
 maintainers:
-  - Amit Kucheria <amit.kucheria@linaro.org>
+  - Amit Kucheria <amitk@kernel.org>
 
 description: |
   QCOM SoCs have TSENS IP to allow temperature measurement. There are currently
@@ -19,10 +19,18 @@ description: |
 properties:
   compatible:
     oneOf:
+      - description: msm8960 TSENS based
+        items:
+          - enum:
+              - qcom,ipq8064-tsens
+              - qcom,msm8960-tsens
+
       - description: v0.1 of TSENS
         items:
           - enum:
+              - qcom,mdm9607-tsens
               - qcom,msm8916-tsens
+              - qcom,msm8939-tsens
               - qcom,msm8974-tsens
           - const: qcom,tsens-v0_1
 
@@ -36,38 +44,58 @@ properties:
       - description: v2 of TSENS
         items:
           - enum:
+              - qcom,msm8953-tsens
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
+              - qcom,sc7180-tsens
+              - qcom,sc7280-tsens
+              - qcom,sc8180x-tsens
+              - qcom,sc8280xp-tsens
+              - qcom,sdm630-tsens
               - qcom,sdm845-tsens
+              - qcom,sm6350-tsens
+              - qcom,sm8150-tsens
+              - qcom,sm8250-tsens
+              - qcom,sm8350-tsens
           - const: qcom,tsens-v2
 
   reg:
-    maxItems: 2
     items:
       - description: TM registers
       - description: SROT registers
 
+  interrupts:
+    minItems: 1
+    items:
+      - description: Combined interrupt if upper or lower threshold crossed
+      - description: Interrupt if critical threshold crossed
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: uplow
+      - const: critical
+
   nvmem-cells:
     minItems: 1
     maxItems: 2
     description:
       Reference to an nvmem node for the calibration data
 
-  nvmem-cells-names:
+  nvmem-cell-names:
     minItems: 1
-    maxItems: 2
     items:
+      - const: calib
       - enum:
-        - caldata
-        - calsel
+          - calib_backup
+          - calib_sel
 
   "#qcom,sensors":
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 1
-      - maximum: 16
     description:
       Number of sensors enabled on this platform
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 16
 
   "#thermal-sensor-cells":
     const: 1
@@ -75,13 +103,23 @@ properties:
       Number of cells required to uniquely identify the thermal sensors. Since
       we have multiple sensors this is set to 1
 
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - "#thermal-sensor-cells"
+  - "#qcom,sensors"
+
 allOf:
   - if:
       properties:
         compatible:
           contains:
             enum:
+              - qcom,ipq8064-tsens
+              - qcom,mdm9607-tsens
               - qcom,msm8916-tsens
+              - qcom,msm8960-tsens
               - qcom,msm8974-tsens
               - qcom,msm8976-tsens
               - qcom,qcs404-tsens
@@ -90,34 +128,55 @@ allOf:
     then:
       properties:
         interrupts:
-          items:
-            - description: Combined interrupt if upper or lower threshold crossed
+          maxItems: 1
         interrupt-names:
-          items:
-            - const: uplow
+          maxItems: 1
 
     else:
       properties:
         interrupts:
-          items:
-            - description: Combined interrupt if upper or lower threshold crossed
-            - description: Interrupt if critical threshold crossed
+          minItems: 2
         interrupt-names:
-          items:
-            - const: uplow
-            - const: critical
+          minItems: 2
 
-required:
-  - compatible
-  - reg
-  - "#qcom,sensors"
-  - interrupts
-  - interrupt-names
-  - "#thermal-sensor-cells"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,tsens-v0_1
+              - qcom,tsens-v1
+              - qcom,tsens-v2
+
+    then:
+      required:
+        - reg
+
+additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example msm9860 based SoC (ipq8064):
+    gcc: clock-controller {
+
+           /* ... */
+
+           tsens: thermal-sensor {
+                compatible = "qcom,ipq8064-tsens";
+
+                 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+                 nvmem-cell-names = "calib", "calib_backup";
+                 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+                 interrupt-names = "uplow";
+
+                 #qcom,sensors = <11>;
+                 #thermal-sensor-cells = <1>;
+          };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 1 (legacy: for pre v1 IP):
     tsens1: thermal-sensor@900000 {
            compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
@@ -125,7 +184,7 @@ examples:
                  <0x4a8000 0x1000>; /* SROT */
 
            nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
-           nvmem-cell-names = "caldata", "calsel";
+           nvmem-cell-names = "calib", "calib_sel";
 
            interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "uplow";
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
deleted file mode 100644
index 28f2cbaf1702..000000000000
--- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
-
-Required properties:
-- compatible : Must include "fsl,qoriq-tmu" or "fsl,imx8mq-tmu". The
-	version of the device is determined by the TMU IP Block Revision
-	Register (IPBRR0) at offset 0x0BF8.
-	Table of correspondences between IPBRR0 values and example  chips:
-		Value           Device
-		----------      -----
-		0x01900102      T1040
-- reg : Address range of TMU registers.
-- interrupts : Contains the interrupt for TMU.
-- fsl,tmu-range : The values to be programmed into TTRnCR, as specified by
-	the SoC reference manual. The first cell is TTR0CR, the second is
-	TTR1CR, etc.
-- fsl,tmu-calibration : A list of cell pairs containing temperature
-	calibration data, as specified by the SoC reference manual.
-	The first cell of each pair is the value to be written to TTCFGR,
-	and the second is the value to be written to TSCFGR.
-- #thermal-sensor-cells : Must be 1. The sensor specifier is the monitoring
-	site ID, and represents the "n" in TRITSRn and TRATSRn.
-
-Optional property:
-- little-endian : If present, the TMU registers are little endian. If absent,
-	the default is big endian.
-- clocks : the clock for clocking the TMU silicon.
-
-Example:
-
-tmu@f0000 {
-	compatible = "fsl,qoriq-tmu";
-	reg = <0xf0000 0x1000>;
-	interrupts = <18 2 0 0>;
-	fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>;
-	fsl,tmu-calibration = <0x00000000 0x00000025
-			       0x00000001 0x00000028
-			       0x00000002 0x0000002d
-			       0x00000003 0x00000031
-			       0x00000004 0x00000036
-			       0x00000005 0x0000003a
-			       0x00000006 0x00000040
-			       0x00000007 0x00000044
-			       0x00000008 0x0000004a
-			       0x00000009 0x0000004f
-			       0x0000000a 0x00000054
-
-			       0x00010000 0x0000000d
-			       0x00010001 0x00000013
-			       0x00010002 0x00000019
-			       0x00010003 0x0000001f
-			       0x00010004 0x00000025
-			       0x00010005 0x0000002d
-			       0x00010006 0x00000033
-			       0x00010007 0x00000043
-			       0x00010008 0x0000004b
-			       0x00010009 0x00000053
-
-			       0x00020000 0x00000010
-			       0x00020001 0x00000017
-			       0x00020002 0x0000001f
-			       0x00020003 0x00000029
-			       0x00020004 0x00000031
-			       0x00020005 0x0000003c
-			       0x00020006 0x00000042
-			       0x00020007 0x0000004d
-			       0x00020008 0x00000056
-
-			       0x00030000 0x00000012
-			       0x00030001 0x0000001d>;
-	#thermal-sensor-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
new file mode 100644
index 000000000000..f09e8723ca2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qoriq-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    description: |
+      The version of the device is determined by the TMU IP Block Revision
+      Register (IPBRR0) at offset 0x0BF8.
+      Table of correspondences between IPBRR0 values and example chips:
+            Value           Device
+            ----------      -----
+            0x01900102      T1040
+    enum:
+      - fsl,qoriq-tmu
+      - fsl,imx8mq-tmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,tmu-range:
+    $ref: '/schemas/types.yaml#/definitions/uint32-array'
+    description: |
+      The values to be programmed into TTRnCR, as specified by the SoC
+      reference manual. The first cell is TTR0CR, the second is TTR1CR, etc.
+    maxItems: 4
+
+  fsl,tmu-calibration:
+    $ref: '/schemas/types.yaml#/definitions/uint32-matrix'
+    description: |
+      A list of cell pairs containing temperature calibration data, as
+      specified by the SoC reference manual. The first cell of each pair
+      is the value to be written to TTCFGR, and the second is the value
+      to be written to TSCFGR.
+    items:
+      items:
+        - description: value for TTCFGR
+        - description: value for TSCFGR
+    minItems: 1
+    maxItems: 64
+
+  little-endian:
+    description: |
+      boolean, if present, the TMU registers are little endian. If absent,
+      the default is big endian.
+    type: boolean
+
+  clocks:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - fsl,tmu-range
+  - fsl,tmu-calibration
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    tmu@f0000 {
+        compatible = "fsl,qoriq-tmu";
+        reg = <0xf0000 0x1000>;
+        interrupts = <18 2 0 0>;
+        fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>;
+        fsl,tmu-calibration = <0x00000000 0x00000025>,
+                              <0x00000001 0x00000028>,
+                              <0x00000002 0x0000002d>,
+                              <0x00000003 0x00000031>,
+                              <0x00000004 0x00000036>,
+                              <0x00000005 0x0000003a>,
+                              <0x00000006 0x00000040>,
+                              <0x00000007 0x00000044>,
+                              <0x00000008 0x0000004a>,
+                              <0x00000009 0x0000004f>,
+                              <0x0000000a 0x00000054>,
+                              <0x00010000 0x0000000d>,
+                              <0x00010001 0x00000013>,
+                              <0x00010002 0x00000019>,
+                              <0x00010003 0x0000001f>,
+                              <0x00010004 0x00000025>,
+                              <0x00010005 0x0000002d>,
+                              <0x00010006 0x00000033>,
+                              <0x00010007 0x00000043>,
+                              <0x00010008 0x0000004b>,
+                              <0x00010009 0x00000053>,
+                              <0x00020000 0x00000010>,
+                              <0x00020001 0x00000017>,
+                              <0x00020002 0x0000001f>,
+                              <0x00020003 0x00000029>,
+                              <0x00020004 0x00000031>,
+                              <0x00020005 0x0000003c>,
+                              <0x00020006 0x00000042>,
+                              <0x00020007 0x0000004d>,
+                              <0x00020008 0x00000056>,
+                              <0x00030000 0x00000012>,
+                              <0x00030001 0x0000001d>;
+        #thermal-sensor-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
deleted file mode 100644
index 12c740b975f7..000000000000
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* DT bindings for Renesas R-Car Gen3 Thermal Sensor driver
-
-On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
-sensors (THS) which are the analog circuits for measuring temperature (Tj)
-inside the LSI.
-
-Required properties:
-- compatible		: "renesas,<soctype>-thermal",
-			  Examples with soctypes are:
-			    - "renesas,r8a774a1-thermal" (RZ/G2M)
-			    - "renesas,r8a774b1-thermal" (RZ/G2N)
-			    - "renesas,r8a7795-thermal" (R-Car H3)
-			    - "renesas,r8a7796-thermal" (R-Car M3-W)
-			    - "renesas,r8a77965-thermal" (R-Car M3-N)
-			    - "renesas,r8a77980-thermal" (R-Car V3H)
-- reg			: Address ranges of the thermal registers. Each sensor
-			  needs one address range. Sorting must be done in
-			  increasing order according to datasheet, i.e.
-			  TSC1, TSC2, ...
-- clocks		: Must contain a reference to the functional clock.
-- #thermal-sensor-cells : must be <1>.
-
-Optional properties:
-
-- interrupts		: interrupts routed to the TSC (must be 3).
-- power-domain		: Must contain a reference to the power domain. This
-			  property is mandatory if the thermal sensor instance
-			  is part of a controllable power domain.
-
-Example:
-
-	tsc: thermal@e6198000 {
-		compatible = "renesas,r8a7795-thermal";
-		reg = <0 0xe6198000 0 0x100>,
-		      <0 0xe61a0000 0 0x100>,
-		      <0 0xe61a8000 0 0x100>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 522>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		#thermal-sensor-cells = <1>;
-	};
-
-	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-			thermal-sensors = <&tsc 0>;
-
-			trips {
-				sensor1_crit: sensor1-crit {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
new file mode 100644
index 000000000000..0f05f5c886c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rcar-gen3-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen3 Thermal Sensor
+
+description:
+  On most R-Car Gen3 and later SoCs, the thermal sensor controllers (TSC)
+  control the thermal sensors (THS) which are the analog circuits for
+  measuring temperature (Tj) inside the LSI.
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a774a1-thermal # RZ/G2M
+      - renesas,r8a774b1-thermal # RZ/G2N
+      - renesas,r8a774e1-thermal # RZ/G2H
+      - renesas,r8a7795-thermal  # R-Car H3
+      - renesas,r8a7796-thermal  # R-Car M3-W
+      - renesas,r8a77961-thermal # R-Car M3-W+
+      - renesas,r8a77965-thermal # R-Car M3-N
+      - renesas,r8a77980-thermal # R-Car V3H
+      - renesas,r8a779a0-thermal # R-Car V3U
+      - renesas,r8a779f0-thermal # R-Car S4-8
+
+  reg: true
+
+  interrupts:
+    items:
+      - description: TEMP1 interrupt
+      - description: TEMP2 interrupt
+      - description: TEMP3 interrupt
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - "#thermal-sensor-cells"
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r8a779a0-thermal
+then:
+  properties:
+    reg:
+      items:
+        - description: TSC0 registers
+        - description: TSC1 registers
+        - description: TSC2 registers
+        - description: TSC3 registers
+        - description: TSC4 registers
+else:
+  properties:
+    reg:
+      minItems: 2
+      items:
+        - description: TSC1 registers
+        - description: TSC2 registers
+        - description: TSC3 registers
+  if:
+    not:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r8a779f0-thermal
+  then:
+    required:
+      - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    tsc: thermal@e6198000 {
+            compatible = "renesas,r8a7795-thermal";
+            reg = <0xe6198000 0x100>,
+                  <0xe61a0000 0x100>,
+                  <0xe61a8000 0x100>;
+            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 522>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 522>;
+            #thermal-sensor-cells = <1>;
+    };
+
+    thermal-zones {
+            sensor_thermal: sensor-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+                    thermal-sensors = <&tsc 0>;
+
+                    trips {
+                            sensor1_crit: sensor1-crit {
+                                    temperature = <90000>;
+                                    hysteresis = <2000>;
+                                    type = "critical";
+                            };
+                    };
+            };
+    };
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    tsc_r8a779a0: thermal@e6190000 {
+            compatible = "renesas,r8a779a0-thermal";
+            reg = <0xe6190000 0x200>,
+                  <0xe6198000 0x200>,
+                  <0xe61a0000 0x200>,
+                  <0xe61a8000 0x200>,
+                  <0xe61b0000 0x200>;
+            clocks = <&cpg CPG_MOD 919>;
+            power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+            resets = <&cpg 919>;
+            #thermal-sensor-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
deleted file mode 100644
index 196112d23b1e..000000000000
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-* Renesas R-Car Thermal
-
-Required properties:
-- compatible		: "renesas,thermal-<soctype>",
-			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
-			   "renesas,rcar-thermal" (without thermal-zone) as
-                           fallback except R-Car V3M/E3/D3 and RZ/G2E.
-			  Examples with soctypes are:
-			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
-			    - "renesas,thermal-r8a7743" (RZ/G1M)
-			    - "renesas,thermal-r8a7744" (RZ/G1N)
-			    - "renesas,thermal-r8a774c0" (RZ/G2E)
-			    - "renesas,thermal-r8a7779" (R-Car H1)
-			    - "renesas,thermal-r8a7790" (R-Car H2)
-			    - "renesas,thermal-r8a7791" (R-Car M2-W)
-			    - "renesas,thermal-r8a7792" (R-Car V2H)
-			    - "renesas,thermal-r8a7793" (R-Car M2-N)
-			    - "renesas,thermal-r8a77970" (R-Car V3M)
-			    - "renesas,thermal-r8a77990" (R-Car E3)
-			    - "renesas,thermal-r8a77995" (R-Car D3)
-- reg			: Address range of the thermal registers.
-			  The 1st reg will be recognized as common register
-			  if it has "interrupts".
-
-Option properties:
-
-- interrupts		: If present should contain 3 interrupts for
-                          R-Car V3M/E3/D3 and RZ/G2E or 1 interrupt otherwise.
-
-Example (non interrupt support):
-
-thermal@ffc48000 {
-	compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
-	reg = <0xffc48000 0x38>;
-};
-
-Example (interrupt support):
-
-thermal@e61f0000 {
-	compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
-	reg = <0xe61f0000 0x14
-		0xe61f0100 0x38
-		0xe61f0200 0x38
-		0xe61f0300 0x38>;
-	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-Example (with thermal-zone):
-
-thermal-zones {
-	cpu_thermal: cpu-thermal {
-		polling-delay-passive	= <1000>;
-		polling-delay		= <5000>;
-
-		thermal-sensors = <&thermal>;
-
-		trips {
-			cpu-crit {
-				temperature	= <115000>;
-				hysteresis	= <0>;
-				type		= "critical";
-			};
-		};
-		cooling-maps {
-		};
-	};
-};
-
-thermal: thermal@e61f0000 {
-	compatible =	"renesas,thermal-r8a7790",
-			"renesas,rcar-gen2-thermal",
-			"renesas,rcar-thermal";
-	reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
-	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
-	power-domains = <&cpg_clocks>;
-	#thermal-sensor-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
new file mode 100644
index 000000000000..119998d10ff4
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rcar-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Thermal
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,thermal-r8a73a4 # R-Mobile APE6
+              - renesas,thermal-r8a7779 # R-Car H1
+          - const: renesas,rcar-thermal # Generic without thermal-zone
+      - items:
+          - enum:
+              - renesas,thermal-r8a7742 # RZ/G1H
+              - renesas,thermal-r8a7743 # RZ/G1M
+              - renesas,thermal-r8a7744 # RZ/G1N
+          - const: renesas,rcar-gen2-thermal # Generic thermal-zone
+      - items:
+          - enum:
+              - renesas,thermal-r8a7790 # R-Car H2
+              - renesas,thermal-r8a7791 # R-Car M2-W
+              - renesas,thermal-r8a7792 # R-Car V2H
+              - renesas,thermal-r8a7793 # R-Car M2-N
+          - const: renesas,rcar-gen2-thermal # Generic thermal-zone
+          - const: renesas,rcar-thermal # Generic without thermal-zone
+      - items:
+          - enum:
+              - renesas,thermal-r8a774c0 # RZ/G2E
+              - renesas,thermal-r8a77970 # R-Car V3M
+              - renesas,thermal-r8a77990 # R-Car E3
+              - renesas,thermal-r8a77995 # R-Car D3
+  reg:
+    description:
+      Address ranges of the thermal registers. If more then one range is given
+      the first one must be the common registers followed by each sensor
+      according to the datasheet.
+    minItems: 1
+    maxItems: 4
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,thermal-r8a73a4 # R-Mobile APE6
+                - renesas,thermal-r8a7779 # R-Car H1
+    then:
+      required:
+        - resets
+        - '#thermal-sensor-cells'
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: renesas,thermal-r8a7779 # R-Car H1
+    then:
+      required:
+        - interrupts
+        - clocks
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  # Example (non interrupt support)
+  - |
+    thermal@ffc48000 {
+            compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+            reg = <0xffc48000 0x38>;
+    };
+
+  # Example (interrupt support)
+  - |
+    #include <dt-bindings/clock/r8a73a4-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    thermal@e61f0000 {
+            compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
+            reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
+                  <0xe61f0200 0x38>, <0xe61f0300 0x38>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
+            power-domains = <&pd_c5>;
+    };
+
+  # Example (with thermal-zone)
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    thermal: thermal@e61f0000 {
+      compatible = "renesas,thermal-r8a7790",
+                   "renesas,rcar-gen2-thermal",
+                   "renesas,rcar-thermal";
+            reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 522>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 522>;
+            #thermal-sensor-cells = <0>;
+    };
+
+    thermal-zones {
+            cpu_thermal: cpu-thermal {
+                    polling-delay-passive = <1000>;
+                    polling-delay = <5000>;
+
+                    thermal-sensors = <&thermal>;
+
+                    trips {
+                            cpu-crit {
+                                    temperature = <115000>;
+                                    hysteresis = <0>;
+                                    type = "critical";
+                            };
+                    };
+                    cooling-maps {
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
deleted file mode 100644
index c6aac9bcacf1..000000000000
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-* Temperature Sensor ADC (TSADC) on rockchip SoCs
-
-Required properties:
-- compatible : should be "rockchip,<name>-tsadc"
-   "rockchip,px30-tsadc":   found on PX30 SoCs
-   "rockchip,rv1108-tsadc": found on RV1108 SoCs
-   "rockchip,rk3228-tsadc": found on RK3228 SoCs
-   "rockchip,rk3288-tsadc": found on RK3288 SoCs
-   "rockchip,rk3328-tsadc": found on RK3328 SoCs
-   "rockchip,rk3368-tsadc": found on RK3368 SoCs
-   "rockchip,rk3399-tsadc": found on RK3399 SoCs
-- reg : physical base address of the controller and length of memory mapped
-	region.
-- interrupts : The interrupt number to the cpu. The interrupt specifier format
-	       depends on the interrupt controller.
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : Shall be "tsadc" for the converter-clock, and "apb_pclk" for
-		the peripheral clock.
-- resets : Must contain an entry for each entry in reset-names.
-	   See ../reset/reset.txt for details.
-- reset-names : Must include the name "tsadc-apb".
-- pinctrl-names : The pin control state names;
-- pinctrl-0 : The "init" pinctrl state, it will be set before device probe.
-- pinctrl-1 : The "default" pinctrl state, it will be set after reset the
-	      TSADC controller.
-- pinctrl-2 : The "sleep" pinctrl state, it will be in for suspend.
-- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
-
-Optional properties:
-- rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value.
-- rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO.
-- rockchip,hw-tshut-polarity : The hardware-controlled active polarity 0:LOW
-			       1:HIGH.
-- rockchip,grf : The phandle of the syscon node for the general register file.
-
-Exiample:
-tsadc: tsadc@ff280000 {
-	compatible = "rockchip,rk3288-tsadc";
-	reg = <0xff280000 0x100>;
-	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
-	clock-names = "tsadc", "apb_pclk";
-	resets = <&cru SRST_TSADC>;
-	reset-names = "tsadc-apb";
-	pinctrl-names = "init", "default", "sleep";
-	pinctrl-0 = <&otp_gpio>;
-	pinctrl-1 = <&otp_out>;
-	pinctrl-2 = <&otp_gpio>;
-	#thermal-sensor-cells = <1>;
-	rockchip,hw-tshut-temp = <95000>;
-	rockchip,hw-tshut-mode = <0>;
-	rockchip,hw-tshut-polarity = <0>;
-};
-
-Example: referring to thermal sensors:
-thermal-zones {
-	cpu_thermal: cpu_thermal {
-		polling-delay-passive = <1000>; /* milliseconds */
-		polling-delay = <5000>; /* milliseconds */
-
-		/* sensor	ID */
-		thermal-sensors = <&tsadc	1>;
-
-		trips {
-			cpu_alert0: cpu_alert {
-				temperature = <70000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "passive";
-			};
-			cpu_crit: cpu_crit {
-				temperature = <90000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "critical";
-			};
-		};
-
-		cooling-maps {
-			map0 {
-				trip = <&cpu_alert0>;
-				cooling-device =
-				    <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
new file mode 100644
index 000000000000..f6c1be226aaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rockchip-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Sensor ADC (TSADC) on Rockchip SoCs
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-tsadc
+      - rockchip,rk3228-tsadc
+      - rockchip,rk3288-tsadc
+      - rockchip,rk3328-tsadc
+      - rockchip,rk3368-tsadc
+      - rockchip,rk3399-tsadc
+      - rockchip,rk3568-tsadc
+      - rockchip,rv1108-tsadc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: tsadc
+      - const: apb_pclk
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: tsadc-apb
+      - const: tsadc
+      - const: tsadc-phy
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  rockchip,grf:
+    description: The phandle of the syscon node for the general register file.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  rockchip,hw-tshut-temp:
+    description: The hardware-controlled shutdown temperature value.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  rockchip,hw-tshut-mode:
+    description: The hardware-controlled shutdown mode 0:CRU 1:GPIO.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  rockchip,hw-tshut-polarity:
+    description: The hardware-controlled active polarity 0:LOW 1:HIGH.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3288-cru.h>
+
+    tsadc: tsadc@ff280000 {
+        compatible = "rockchip,rk3288-tsadc";
+        reg = <0xff280000 0x100>;
+        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+        clock-names = "tsadc", "apb_pclk";
+        resets = <&cru SRST_TSADC>;
+        reset-names = "tsadc-apb";
+        #thermal-sensor-cells = <1>;
+        rockchip,hw-tshut-temp = <95000>;
+        rockchip,hw-tshut-mode = <0>;
+        rockchip,hw-tshut-polarity = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
new file mode 100644
index 000000000000..1d8373397848
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rzg2l-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Thermal Sensor Unit
+
+description:
+  On RZ/G2L SoCs, the thermal sensor unit (TSU) measures the
+  temperature(Tj) inside the LSI.
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g043-tsu # RZ/G2UL
+          - renesas,r9a07g044-tsu # RZ/G2{L,LC}
+          - renesas,r9a07g054-tsu # RZ/V2L
+      - const: renesas,rzg2l-tsu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    tsu: thermal@10059400 {
+            compatible = "renesas,r9a07g044-tsu",
+                         "renesas,rzg2l-tsu";
+            reg = <0x10059400 0x400>;
+            clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
+            resets = <&cpg R9A07G044_TSU_PRESETN>;
+            power-domains = <&cpg>;
+            #thermal-sensor-cells = <1>;
+    };
+
+    thermal-zones {
+            cpu-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+                    thermal-sensors = <&tsu 0>;
+
+                    trips {
+                            sensor_crit: sensor-crit {
+                                    temperature = <125000>;
+                                    hysteresis = <1000>;
+                                    type = "critical";
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml
new file mode 100644
index 000000000000..1344df708e2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/samsung,exynos-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Thermal Management Unit (TMU)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  For multi-instance tmu each instance should have an alias correctly numbered
+  in "aliases" node.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos3250-tmu
+      - samsung,exynos4412-tmu
+      - samsung,exynos4210-tmu
+      - samsung,exynos5250-tmu
+      - samsung,exynos5260-tmu
+        # For TMU channel 0, 1 on Exynos5420:
+      - samsung,exynos5420-tmu
+        # For TMU channels 2, 3 and 4 of Exynos5420:
+      - samsung,exynos5420-tmu-ext-triminfo
+      - samsung,exynos5433-tmu
+      - samsung,exynos7-tmu
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    description: |
+      The Exynos TMU supports generating interrupts when reaching given
+      temperature thresholds. Number of supported thermal trip points depends
+      on the SoC (only first trip points defined in DT will be configured)::
+       - most of SoC: 4
+       - samsung,exynos5433-tmu: 8
+       - samsung,exynos7-tmu: 8
+    maxItems: 1
+
+  reg:
+    items:
+      - description: TMU instance registers.
+      - description: |
+          Shared TMU registers.
+
+          Note:: On Exynos5420, the TRIMINFO register is misplaced for TMU
+          channels 2, 3 and 4 Use "samsung,exynos5420-tmu-ext-triminfo" in
+          cases, there is a misplaced register, also provide clock to access
+          that base.
+          TRIMINFO at 0x1006c000 contains data for TMU channel 3
+          TRIMINFO at 0x100a0000 contains data for TMU channel 4
+          TRIMINFO at 0x10068000 contains data for TMU channel 2
+    minItems: 1
+
+  '#thermal-sensor-cells': true
+
+  vtmu-supply:
+    description: The regulator node supplying voltage to TMU.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - $ref: /schemas/thermal/thermal-sensor.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5420-tmu-ext-triminfo
+    then:
+      properties:
+        clocks:
+          items:
+            - description:
+                Operational clock for TMU channel.
+            - description:
+                Optional clock to access the shared registers (e.g. TRIMINFO) of TMU
+                channel.
+        clock-names:
+          items:
+            - const: tmu_apbif
+            - const: tmu_triminfo_apbif
+        reg:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-tmu
+              - samsung,exynos7-tmu
+    then:
+      properties:
+        clocks:
+          items:
+            - description:
+                Operational clock for TMU channel.
+            - description:
+                Optional special clock for functional operation of TMU channel.
+        clock-names:
+          items:
+            - const: tmu_apbif
+            - const: tmu_sclk
+        reg:
+          minItems: 1
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-tmu
+              - samsung,exynos4412-tmu
+              - samsung,exynos4210-tmu
+              - samsung,exynos5250-tmu
+              - samsung,exynos5260-tmu
+              - samsung,exynos5420-tmu
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        reg:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+
+    tmu@100c0000 {
+        compatible = "samsung,exynos4412-tmu";
+        reg = <0x100C0000 0x100>;
+        interrupt-parent = <&combiner>;
+        interrupts = <2 4>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&clock CLK_TMU_APBIF>;
+        clock-names = "tmu_apbif";
+        vtmu-supply = <&ldo10_reg>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tmu@10068000 {
+        compatible = "samsung,exynos5420-tmu-ext-triminfo";
+        reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&clock 318>, <&clock 318>; /* CLK_TMU */
+        clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+        vtmu-supply = <&ldo7_reg>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tmu@10060000 {
+        compatible = "samsung,exynos5433-tmu";
+        reg = <0x10060000 0x200>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&cmu_peris 3>, /* CLK_PCLK_TMU0_APBIF */
+                 <&cmu_peris 35>; /* CLK_SCLK_TMU0 */
+        clock-names = "tmu_apbif", "tmu_sclk";
+        vtmu-supply = <&ldo3_reg>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
new file mode 100644
index 000000000000..c5b25ce44956
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/socionext,uniphier-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier thermal monitor
+
+description: |
+  This describes the devicetree bindings for thermal monitor supported by
+  PVT(Process, Voltage and Temperature) monitoring unit implemented on
+  Socionext UniPhier SoCs.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pxs2-thermal
+      - socionext,uniphier-ld20-thermal
+      - socionext,uniphier-pxs3-thermal
+      - socionext,uniphier-nx1-thermal
+
+  interrupts:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+  socionext,tmod-calibration:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+    description:
+      A pair of calibrated values referred from PVT, in case that the values
+      aren't set on SoC, like a reference board.
+
+required:
+  - compatible
+  - interrupts
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    // The UniPhier thermal should be a subnode of a "syscon" compatible node.
+
+    sysctrl@61840000 {
+        compatible = "socionext,uniphier-ld20-sysctrl",
+                     "simple-mfd", "syscon";
+        reg = <0x61840000 0x10000>;
+
+        pvtctl: thermal {
+            compatible = "socionext,uniphier-ld20-thermal";
+            interrupts = <0 3 1>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
new file mode 100644
index 000000000000..6d65a3cf2af2
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/sprd-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum thermal sensor controller bindings
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    const: sprd,ums512-thermal
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: enable
+
+  nvmem-cells:
+    maxItems: 2
+    description:
+      Reference to nvmem nodes for the calibration data.
+
+  nvmem-cell-names:
+    items:
+      - const: thm_sign_cal
+      - const: thm_ratio_cal
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^([a-z]*-)?sensor(-section)?@[0-9]+$":
+    type: object
+    description:
+      Represent one thermal sensor.
+
+    properties:
+      reg:
+        description: Specify the sensor id.
+        maxItems: 1
+
+      nvmem-cells:
+        maxItems: 1
+        description:
+          Reference to an nvmem node for the calibration data.
+
+      nvmem-cell-names:
+        const: sen_delta_cal
+
+    required:
+      - reg
+      - nvmem-cells
+      - nvmem-cell-names
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - nvmem-cells
+  - nvmem-cell-names
+  - "#thermal-sensor-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+        ap_thm0: thermal@32200000 {
+                compatible = "sprd,ums512-thermal";
+                reg = <0x32200000 0x10000>;
+                clock-names = "enable";
+                clocks = <&aonapb_gate 32>;
+                #thermal-sensor-cells = <1>;
+                nvmem-cells = <&thm0_sign>, <&thm0_ratio>;
+                nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                prometheus-sensor@0 {
+                        reg = <0>;
+                        nvmem-cells = <&thm0_sen0>;
+                        nvmem-cell-names = "sen_delta_cal";
+                };
+
+                ank-sensor@1 {
+                        reg = <1>;
+                        nvmem-cells = <&thm0_sen1>;
+                        nvmem-cell-names = "sen_delta_cal";
+                };
+        };
+...
diff --git a/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml b/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml
index c0f59c56003d..bee41cff5142 100644
--- a/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 digital thermal sensor (DTS) binding
 
 maintainers:
-  - David Hernandez Sanchez <david.hernandezsanchez@st.com>
+  - Pascal Paillet <p.paillet@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/thermal/tango-thermal.txt b/Documentation/devicetree/bindings/thermal/tango-thermal.txt
deleted file mode 100644
index 212198d4b937..000000000000
--- a/Documentation/devicetree/bindings/thermal/tango-thermal.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Tango Thermal
-
-The SMP8758 SoC includes 3 instances of this temperature sensor
-(in the CPU, video decoder, and PCIe controller).
-
-Required properties:
-- #thermal-sensor-cells: Should be 0 (see thermal.txt)
-- compatible: "sigma,smp8758-thermal"
-- reg: Address range of the thermal registers
-
-Example:
-
-	cpu_temp: thermal@920100 {
-		#thermal-sensor-cells = <0>;
-		compatible = "sigma,smp8758-thermal";
-		reg = <0x920100 12>;
-	};
diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
new file mode 100644
index 000000000000..850a9841b110
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0)
+# Copyright 2020 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/thermal-cooling-devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thermal cooling device binding
+
+maintainers:
+  - Amit Kucheria <amitk@kernel.org>
+
+description: |
+  Thermal management is achieved in devicetree by describing the sensor hardware
+  and the software abstraction of cooling devices and thermal zones required to
+  take appropriate action to mitigate thermal overload.
+
+  The following node types are used to completely describe a thermal management
+  system in devicetree:
+   - thermal-sensor: device that measures temperature, has SoC-specific bindings
+   - cooling-device: device used to dissipate heat either passively or actively
+   - thermal-zones: a container of the following node types used to describe all
+     thermal data for the platform
+
+  This binding describes the cooling devices.
+
+  There are essentially two ways to provide control on power dissipation:
+    - Passive cooling: by means of regulating device performance. A typical
+      passive cooling mechanism is a CPU that has dynamic voltage and frequency
+      scaling (DVFS), and uses lower frequencies as cooling states.
+    - Active cooling: by means of activating devices in order to remove the
+      dissipated heat, e.g. regulating fan speeds.
+
+  Any cooling device has a range of cooling states (i.e. different levels of
+  heat dissipation). They also have a way to determine the state of cooling in
+  which the device is. For example, a fan's cooling states correspond to the
+  different fan speeds possible. Cooling states are referred to by single
+  unsigned integers, where larger numbers mean greater heat dissipation. The
+  precise set of cooling states associated with a device should be defined in
+  a particular device's binding.
+
+select: true
+
+properties:
+  "#cooling-cells":
+    description:
+      Must be 2, in order to specify minimum and maximum cooling state used in
+      the cooling-maps reference. The first cell is the minimum cooling state
+      and the second cell is the maximum cooling state requested.
+    const: 2
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/thermal/thermal.h>
+
+    // Example 1: Cpufreq cooling device on CPU0
+    cpus {
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            CPU0: cpu@0 {
+                    device_type = "cpu";
+                    compatible = "qcom,kryo385";
+                    reg = <0x0 0x0>;
+                    enable-method = "psci";
+                    cpu-idle-states = <&LITTLE_CPU_SLEEP_0>,
+                                      <&LITTLE_CPU_SLEEP_1>,
+                                      <&CLUSTER_SLEEP_0>;
+                    capacity-dmips-mhz = <607>;
+                    dynamic-power-coefficient = <100>;
+                    qcom,freq-domain = <&cpufreq_hw 0>;
+                    #cooling-cells = <2>;
+                    next-level-cache = <&L2_0>;
+                    L2_0: l2-cache {
+                            compatible = "cache";
+                            next-level-cache = <&L3_0>;
+                            L3_0: l3-cache {
+                                    compatible = "cache";
+                            };
+                    };
+          };
+
+          /* ... */
+
+    };
+
+    /* ... */
+
+    thermal-zones {
+            cpu0-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+
+                    thermal-sensors = <&tsens0 1>;
+
+                    trips {
+                            cpu0_alert0: trip-point0 {
+                                    temperature = <90000>;
+                                    hysteresis = <2000>;
+                                    type = "passive";
+                            };
+                    };
+
+                    cooling-maps {
+                            map0 {
+                                    trip = <&cpu0_alert0>;
+                                    /* Corresponds to 1000MHz in OPP table */
+                                    cooling-device = <&CPU0 5 5>;
+                            };
+                    };
+            };
+
+            /* ... */
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt b/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt
index 691a09db2fef..e136946a2f4f 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt
@@ -8,7 +8,7 @@ temperature using voltage-temperature lookup table.
 Required properties:
 ===================
 - compatible:		     Must be "generic-adc-thermal".
-- #thermal-sensor-cells:     Should be 1. See ./thermal.txt for a description
+- #thermal-sensor-cells:     Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description
 		             of this property.
 Optional properties:
 ===================
diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml
new file mode 100644
index 000000000000..cc938d7ad1f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/thermal-idle.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thermal idle cooling device binding
+
+maintainers:
+  - Daniel Lezcano <daniel.lezcano@linaro.org>
+
+description: |
+  The thermal idle cooling device allows the system to passively
+  mitigate the temperature on the device by injecting idle cycles,
+  forcing it to cool down.
+
+  This binding describes the thermal idle node.
+
+properties:
+  $nodename:
+    const: thermal-idle
+    description: |
+      A thermal-idle node describes the idle cooling device properties to
+      cool down efficiently the attached thermal zone.
+
+  '#cooling-cells':
+    const: 2
+    description: |
+      Must be 2, in order to specify minimum and maximum cooling state used in
+      the cooling-maps reference. The first cell is the minimum cooling state
+      and the second cell is the maximum cooling state requested.
+
+  duration-us:
+    description: |
+      The idle duration in microsecond the device should cool down.
+
+  exit-latency-us:
+    description: |
+      The exit latency constraint in microsecond for the injected idle state
+      for the device. It is the latency constraint to apply when selecting an
+      idle state from among all the present ones.
+
+required:
+  - '#cooling-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/thermal/thermal.h>
+
+    // Example: Combining idle cooling device on big CPUs with cpufreq cooling device
+    cpus {
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            /* ... */
+
+                 cpu_b0: cpu@100 {
+                         device_type = "cpu";
+                         compatible = "arm,cortex-a72";
+                         reg = <0x0 0x100>;
+                         enable-method = "psci";
+                         capacity-dmips-mhz = <1024>;
+                         dynamic-power-coefficient = <436>;
+                         #cooling-cells = <2>; /* min followed by max */
+                         cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>;
+                         thermal-idle {
+                                 #cooling-cells = <2>;
+                                 duration-us = <10000>;
+                                 exit-latency-us = <500>;
+                         };
+                };
+
+                cpu_b1: cpu@101 {
+                        device_type = "cpu";
+                        compatible = "arm,cortex-a72";
+                        reg = <0x0 0x101>;
+                        enable-method = "psci";
+                        capacity-dmips-mhz = <1024>;
+                        dynamic-power-coefficient = <436>;
+                        #cooling-cells = <2>; /* min followed by max */
+                        cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>;
+                        thermal-idle {
+                                #cooling-cells = <2>;
+                                duration-us = <10000>;
+                                exit-latency-us = <500>;
+                        };
+                 };
+
+          /* ... */
+
+    };
+
+    /* ... */
+
+    thermal_zones {
+         cpu_thermal: cpu {
+                polling-delay-passive = <100>;
+                polling-delay = <1000>;
+
+                /* ... */
+
+                trips {
+                        cpu_alert0: cpu_alert0 {
+                                    temperature = <65000>;
+                                    hysteresis = <2000>;
+                                    type = "passive";
+                        };
+
+                        cpu_alert1: cpu_alert1 {
+                                    temperature = <70000>;
+                                    hysteresis = <2000>;
+                                    type = "passive";
+                        };
+
+                        cpu_alert2: cpu_alert2 {
+                                    temperature = <75000>;
+                                    hysteresis = <2000>;
+                                    type = "passive";
+                        };
+
+                        cpu_crit: cpu_crit {
+                                    temperature = <95000>;
+                                    hysteresis = <2000>;
+                                    type = "critical";
+                        };
+                };
+
+                cooling-maps {
+                        map0 {
+                             trip = <&cpu_alert1>;
+                             cooling-device = <&{/cpus/cpu@100/thermal-idle} 0 15 >,
+                                              <&{/cpus/cpu@101/thermal-idle} 0 15>;
+                        };
+
+                        map1 {
+                             trip = <&cpu_alert2>;
+                             cooling-device =
+                                        <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+                                        <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+                       };
+                };
+          };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
new file mode 100644
index 000000000000..4bd345c71eb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0)
+# Copyright 2020 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/thermal-sensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thermal sensor binding
+
+maintainers:
+  - Amit Kucheria <amitk@kernel.org>
+
+description: |
+  Thermal management is achieved in devicetree by describing the sensor hardware
+  and the software abstraction of thermal zones required to take appropriate
+  action to mitigate thermal overloads.
+
+  The following node types are used to completely describe a thermal management
+  system in devicetree:
+   - thermal-sensor: device that measures temperature, has SoC-specific bindings
+   - cooling-device: device used to dissipate heat either passively or actively
+   - thermal-zones: a container of the following node types used to describe all
+     thermal data for the platform
+
+  This binding describes the thermal-sensor.
+
+  Thermal sensor devices provide temperature sensing capabilities on thermal
+  zones. Typical devices are I2C ADC converters and bandgaps. Thermal sensor
+  devices may control one or more internal sensors.
+
+properties:
+  "#thermal-sensor-cells":
+    description:
+      Used to uniquely identify a thermal sensor instance within an IC. Will be
+      0 on sensor nodes with only a single sensor and at least 1 on nodes
+      containing several internal sensors.
+    enum: [0, 1]
+
+required:
+  - "#thermal-sensor-cells"
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    // Example 1: SDM845 TSENS
+    soc: soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            /* ... */
+
+            tsens0: thermal-sensor@c263000 {
+                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+                    reg = <0 0x0c263000 0 0x1ff>, /* TM */
+                          <0 0x0c222000 0 0x1ff>; /* SROT */
+                    #qcom,sensors = <13>;
+                    interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "uplow", "critical";
+                    #thermal-sensor-cells = <1>;
+            };
+
+            tsens1: thermal-sensor@c265000 {
+                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+                    reg = <0 0x0c265000 0 0x1ff>, /* TM */
+                          <0 0x0c223000 0 0x1ff>; /* SROT */
+                    #qcom,sensors = <8>;
+                    interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "uplow", "critical";
+                    #thermal-sensor-cells = <1>;
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
new file mode 100644
index 000000000000..8d2c6d74b605
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -0,0 +1,343 @@
+# SPDX-License-Identifier: (GPL-2.0)
+# Copyright 2020 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
+$schema: http://devicetree.org/meta-schemas/base.yaml#
+
+title: Thermal zone binding
+
+maintainers:
+  - Amit Kucheria <amitk@kernel.org>
+
+description: |
+  Thermal management is achieved in devicetree by describing the sensor hardware
+  and the software abstraction of cooling devices and thermal zones required to
+  take appropriate action to mitigate thermal overloads.
+
+  The following node types are used to completely describe a thermal management
+  system in devicetree:
+   - thermal-sensor: device that measures temperature, has SoC-specific bindings
+   - cooling-device: device used to dissipate heat either passively or actively
+   - thermal-zones: a container of the following node types used to describe all
+     thermal data for the platform
+
+  This binding describes the thermal-zones.
+
+  The polling-delay properties of a thermal-zone are bound to the maximum dT/dt
+  (temperature derivative over time) in two situations for a thermal zone:
+    1. when passive cooling is activated (polling-delay-passive)
+    2. when the zone just needs to be monitored (polling-delay) or when
+       active cooling is activated.
+
+  The maximum dT/dt is highly bound to hardware power consumption and
+  dissipation capability. The delays should be chosen to account for said
+  max dT/dt, such that a device does not cross several trip boundaries
+  unexpectedly between polls. Choosing the right polling delays shall avoid
+  having the device in temperature ranges that may damage the silicon structures
+  and reduce silicon lifetime.
+
+properties:
+  $nodename:
+    const: thermal-zones
+    description:
+      A /thermal-zones node is required in order to use the thermal framework to
+      manage input from the various thermal zones in the system in order to
+      mitigate thermal overload conditions. It does not represent a real device
+      in the system, but acts as a container to link a thermal sensor device,
+      platform-data regarding temperature thresholds and the mitigation actions
+      to take when the temperature crosses those thresholds.
+
+patternProperties:
+  "^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$":
+    type: object
+    description:
+      Each thermal zone node contains information about how frequently it
+      must be checked, the sensor responsible for reporting temperature for
+      this zone, one sub-node containing the various trip points for this
+      zone and one sub-node containing all the zone cooling-maps.
+
+    properties:
+      polling-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          The maximum number of milliseconds to wait between polls when
+          checking this thermal zone. Setting this to 0 disables the polling
+          timers setup by the thermal framework and assumes that the thermal
+          sensors in this zone support interrupts.
+
+      polling-delay-passive:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          The maximum number of milliseconds to wait between polls when
+          checking this thermal zone while doing passive cooling. Setting
+          this to 0 disables the polling timers setup by the thermal
+          framework and assumes that the thermal sensors in this zone
+          support interrupts.
+
+      thermal-sensors:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 1
+        description:
+          The thermal sensor phandle and sensor specifier used to monitor this
+          thermal zone.
+
+      coefficients:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          An array of integers containing the coefficients of a linear equation
+          that binds all the sensors listed in this thermal zone.
+
+          The linear equation used is as follows,
+            z = c0 * x0 + c1 * x1 + ... + c(n-1) * x(n-1) + cn
+          where c0, c1, .., cn are the coefficients.
+
+          Coefficients default to 1 in case this property is not specified. The
+          coefficients are ordered and are matched with sensors by means of the
+          sensor ID. Additional coefficients are interpreted as constant offset.
+
+      sustainable-power:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          An estimate of the sustainable power (in mW) that this thermal zone
+          can dissipate at the desired control temperature. For reference, the
+          sustainable power of a 4-inch phone is typically 2000mW, while on a
+          10-inch tablet is around 4500mW.
+
+      trips:
+        type: object
+        description:
+          This node describes a set of points in the temperature domain at
+          which the thermal framework needs to take action. The actions to
+          be taken are defined in another node called cooling-maps.
+
+        patternProperties:
+          "^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$":
+            type: object
+
+            properties:
+              temperature:
+                $ref: /schemas/types.yaml#/definitions/int32
+                minimum: -273000
+                maximum: 200000
+                description:
+                  An integer expressing the trip temperature in millicelsius.
+
+              hysteresis:
+                $ref: /schemas/types.yaml#/definitions/uint32
+                description:
+                  An unsigned integer expressing the hysteresis delta with
+                  respect to the trip temperature property above, also in
+                  millicelsius. Any cooling action initiated by the framework is
+                  maintained until the temperature falls below
+                  (trip temperature - hysteresis). This potentially prevents a
+                  situation where the trip gets constantly triggered soon after
+                  cooling action is removed.
+
+              type:
+                $ref: /schemas/types.yaml#/definitions/string
+                enum:
+                  - active   # enable active cooling e.g. fans
+                  - passive  # enable passive cooling e.g. throttling cpu
+                  - hot      # send notification to driver
+                  - critical # send notification to driver, trigger shutdown
+                description: |
+                  There are four valid trip types: active, passive, hot,
+                  critical.
+
+                  The critical trip type is used to set the maximum
+                  temperature threshold above which the HW becomes
+                  unstable and underlying firmware might even trigger a
+                  reboot. Hitting the critical threshold triggers a system
+                  shutdown.
+
+                  The hot trip type can be used to send a notification to
+                  the thermal driver (if a .notify callback is registered).
+                  The action to be taken is left to the driver.
+
+                  The passive trip type can be used to slow down HW e.g. run
+                  the CPU, GPU, bus at a lower frequency.
+
+                  The active trip type can be used to control other HW to
+                  help in cooling e.g. fans can be sped up or slowed down
+
+            required:
+              - temperature
+              - hysteresis
+              - type
+            additionalProperties: false
+
+        additionalProperties: false
+
+      cooling-maps:
+        type: object
+        description:
+          This node describes the action to be taken when a thermal zone
+          crosses one of the temperature thresholds described in the trips
+          node. The action takes the form of a mapping relation between a
+          trip and the target cooling device state.
+
+        patternProperties:
+          "^map[-a-zA-Z0-9]*$":
+            type: object
+
+            properties:
+              trip:
+                $ref: /schemas/types.yaml#/definitions/phandle
+                description:
+                  A phandle of a trip point node within this thermal zone.
+
+              cooling-device:
+                $ref: /schemas/types.yaml#/definitions/phandle-array
+                description:
+                  A list of cooling device phandles along with the minimum
+                  and maximum cooling state specifiers for each cooling
+                  device. Using the THERMAL_NO_LIMIT (-1UL) constant in the
+                  cooling-device phandle limit specifier lets the framework
+                  use the minimum and maximum cooling state for that cooling
+                  device automatically.
+
+              contribution:
+                $ref: /schemas/types.yaml#/definitions/uint32
+                description:
+                  The cooling contribution to the thermal zone of the referred
+                  cooling device at the referred trip point. The contribution is
+                  a ratio of the sum of all cooling contributions within a
+                  thermal zone.
+
+            required:
+              - trip
+              - cooling-device
+            additionalProperties: false
+
+    required:
+      - polling-delay
+      - polling-delay-passive
+      - thermal-sensors
+      - trips
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/thermal/thermal.h>
+
+    // Example 1: SDM845 TSENS
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            /* ... */
+
+            tsens0: thermal-sensor@c263000 {
+                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+                    reg = <0 0x0c263000 0 0x1ff>, /* TM */
+                          <0 0x0c222000 0 0x1ff>; /* SROT */
+                    #qcom,sensors = <13>;
+                    interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "uplow", "critical";
+                    #thermal-sensor-cells = <1>;
+            };
+
+            tsens1: thermal-sensor@c265000 {
+                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+                    reg = <0 0x0c265000 0 0x1ff>, /* TM */
+                          <0 0x0c223000 0 0x1ff>; /* SROT */
+                    #qcom,sensors = <8>;
+                    interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "uplow", "critical";
+                    #thermal-sensor-cells = <1>;
+            };
+    };
+
+    /* ... */
+
+    thermal-zones {
+            cpu0-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+
+                    thermal-sensors = <&tsens0 1>;
+
+                    trips {
+                            cpu0_alert0: trip-point0 {
+                                    temperature = <90000>;
+                                    hysteresis = <2000>;
+                                    type = "passive";
+                            };
+
+                            cpu0_alert1: trip-point1 {
+                                    temperature = <95000>;
+                                    hysteresis = <2000>;
+                                    type = "passive";
+                            };
+
+                            cpu0_crit: cpu_crit {
+                                    temperature = <110000>;
+                                    hysteresis = <1000>;
+                                    type = "critical";
+                            };
+                    };
+
+                    cooling-maps {
+                            map0 {
+                                    trip = <&cpu0_alert0>;
+                                    /* Corresponds to 1400MHz in OPP table */
+                                    cooling-device = <&CPU0 3 3>, <&CPU1 3 3>,
+                                                     <&CPU2 3 3>, <&CPU3 3 3>;
+                            };
+
+                            map1 {
+                                    trip = <&cpu0_alert1>;
+                                    /* Corresponds to 1000MHz in OPP table */
+                                    cooling-device = <&CPU0 5 5>, <&CPU1 5 5>,
+                                                     <&CPU2 5 5>, <&CPU3 5 5>;
+                            };
+                    };
+            };
+
+            /* ... */
+
+            cluster0-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+
+                    thermal-sensors = <&tsens0 5>;
+
+                    trips {
+                            cluster0_alert0: trip-point0 {
+                                    temperature = <90000>;
+                                    hysteresis = <2000>;
+                                    type = "hot";
+                            };
+                            cluster0_crit: cluster0_crit {
+                                    temperature = <110000>;
+                                    hysteresis = <2000>;
+                                    type = "critical";
+                            };
+                    };
+            };
+
+            /* ... */
+
+            gpu-top-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+
+                    thermal-sensors = <&tsens0 11>;
+
+                    trips {
+                            gpu1_alert0: trip-point0 {
+                                    temperature = <90000>;
+                                    hysteresis = <2000>;
+                                    type = "hot";
+                            };
+                    };
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
deleted file mode 100644
index ca14ba959e0d..000000000000
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ /dev/null
@@ -1,586 +0,0 @@
-* Thermal Framework Device Tree descriptor
-
-This file describes a generic binding to provide a way of
-defining hardware thermal structure using device tree.
-A thermal structure includes thermal zones and their components,
-such as trip points, polling intervals, sensors and cooling devices
-binding descriptors.
-
-The target of device tree thermal descriptors is to describe only
-the hardware thermal aspects. The thermal device tree bindings are
-not about how the system must control or which algorithm or policy
-must be taken in place.
-
-There are five types of nodes involved to describe thermal bindings:
-- thermal sensors: devices which may be used to take temperature
-  measurements.
-- cooling devices: devices which may be used to dissipate heat.
-- trip points: describe key temperatures at which cooling is recommended. The
-  set of points should be chosen based on hardware limits.
-- cooling maps: used to describe links between trip points and cooling devices;
-- thermal zones: used to describe thermal data within the hardware;
-
-The following is a description of each of these node types.
-
-* Thermal sensor devices
-
-Thermal sensor devices are nodes providing temperature sensing capabilities on
-thermal zones. Typical devices are I2C ADC converters and bandgaps. These are
-nodes providing temperature data to thermal zones. Thermal sensor devices may
-control one or more internal sensors.
-
-Required property:
-- #thermal-sensor-cells: Used to provide sensor device specific information
-  Type: unsigned	 while referring to it. Typically 0 on thermal sensor
-  Size: one cell	 nodes with only one sensor, and at least 1 on nodes
-			 with several internal sensors, in order
-			 to identify uniquely the sensor instances within
-			 the IC. See thermal zone binding for more details
-			 on how consumers refer to sensor devices.
-
-* Cooling device nodes
-
-Cooling devices are nodes providing control on power dissipation. There
-are essentially two ways to provide control on power dissipation. First
-is by means of regulating device performance, which is known as passive
-cooling. A typical passive cooling is a CPU that has dynamic voltage and
-frequency scaling (DVFS), and uses lower frequencies as cooling states.
-Second is by means of activating devices in order to remove
-the dissipated heat, which is known as active cooling, e.g. regulating
-fan speeds. In both cases, cooling devices shall have a way to determine
-the state of cooling in which the device is.
-
-Any cooling device has a range of cooling states (i.e. different levels
-of heat dissipation). For example a fan's cooling states correspond to
-the different fan speeds possible. Cooling states are referred to by
-single unsigned integers, where larger numbers mean greater heat
-dissipation. The precise set of cooling states associated with a device
-should be defined in a particular device's binding.
-For more examples of cooling devices, refer to the example sections below.
-
-Required properties:
-- #cooling-cells:	Used to provide cooling device specific information
-  Type: unsigned	while referring to it. Must be at least 2, in order
-  Size: one cell	to specify minimum and maximum cooling state used
-			in the reference. The first cell is the minimum
-			cooling state requested and the second cell is
-			the maximum cooling state requested in the reference.
-			See Cooling device maps section below for more details
-			on how consumers refer to cooling devices.
-
-* Trip points
-
-The trip node is a node to describe a point in the temperature domain
-in which the system takes an action. This node describes just the point,
-not the action.
-
-Required properties:
-- temperature:		An integer indicating the trip temperature level,
-  Type: signed		in millicelsius.
-  Size: one cell
-
-- hysteresis:		A low hysteresis value on temperature property (above).
-  Type: unsigned	This is a relative value, in millicelsius.
-  Size: one cell
-
-- type:			a string containing the trip type. Expected values are:
-	"active":	A trip point to enable active cooling
-	"passive":	A trip point to enable passive cooling
-	"hot":		A trip point to notify emergency
-	"critical":	Hardware not reliable.
-  Type: string
-
-* Cooling device maps
-
-The cooling device maps node is a node to describe how cooling devices
-get assigned to trip points of the zone. The cooling devices are expected
-to be loaded in the target system.
-
-Required properties:
-- cooling-device:	A list of phandles of cooling devices with their specifiers,
-  Type: phandle +	referring to which cooling devices are used in this
-    cooling specifier	binding. In the cooling specifier, the first cell
-			is the minimum cooling state and the second cell
-			is the maximum cooling state used in this map.
-- trip:			A phandle of a trip point node within the same thermal
-  Type: phandle of	zone.
-   trip point node
-
-Optional property:
-- contribution:		The cooling contribution to the thermal zone of the
-  Type: unsigned	referred cooling device at the referred trip point.
-  Size: one cell	The contribution is a ratio of the sum
-			of all cooling contributions within a thermal zone.
-
-Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle
-limit specifier means:
-(i)   - minimum state allowed for minimum cooling state used in the reference.
-(ii)  - maximum state allowed for maximum cooling state used in the reference.
-Refer to include/dt-bindings/thermal/thermal.h for definition of this constant.
-
-* Thermal zone nodes
-
-The thermal zone node is the node containing all the required info
-for describing a thermal zone, including its cooling device bindings. The
-thermal zone node must contain, apart from its own properties, one sub-node
-containing trip nodes and one sub-node containing all the zone cooling maps.
-
-Required properties:
-- polling-delay:	The maximum number of milliseconds to wait between polls
-  Type: unsigned	when checking this thermal zone.
-  Size: one cell
-
-- polling-delay-passive: The maximum number of milliseconds to wait
-  Type: unsigned	between polls when performing passive cooling.
-  Size: one cell
-
-- thermal-sensors:	A list of thermal sensor phandles and sensor specifier
-  Type: list of		used while monitoring the thermal zone.
-  phandles + sensor
-  specifier
-
-- trips:		A sub-node which is a container of only trip point nodes
-  Type: sub-node	required to describe the thermal zone.
-
-- cooling-maps:		A sub-node which is a container of only cooling device
-  Type: sub-node	map nodes, used to describe the relation between trips
-			and cooling devices.
-
-Optional property:
-- coefficients:		An array of integers (one signed cell) containing
-  Type: array		coefficients to compose a linear relation between
-  Elem size: one cell	the sensors listed in the thermal-sensors property.
-  Elem type: signed	Coefficients defaults to 1, in case this property
-			is not specified. A simple linear polynomial is used:
-			Z = c0 * x0 + c1 * x1 + ... + c(n-1) * x(n-1) + cn.
-
-			The coefficients are ordered and they match with sensors
-			by means of sensor ID. Additional coefficients are
-			interpreted as constant offset.
-
-- sustainable-power:	An estimate of the sustainable power (in mW) that the
-  Type: unsigned	thermal zone can dissipate at the desired
-  Size: one cell	control temperature.  For reference, the
-			sustainable power of a 4'' phone is typically
-			2000mW, while on a 10'' tablet is around
-			4500mW.
-
-Note: The delay properties are bound to the maximum dT/dt (temperature
-derivative over time) in two situations for a thermal zone:
-(i)  - when passive cooling is activated (polling-delay-passive); and
-(ii) - when the zone just needs to be monitored (polling-delay) or
-when active cooling is activated.
-
-The maximum dT/dt is highly bound to hardware power consumption and dissipation
-capability. The delays should be chosen to account for said max dT/dt,
-such that a device does not cross several trip boundaries unexpectedly
-between polls. Choosing the right polling delays shall avoid having the
-device in temperature ranges that may damage the silicon structures and
-reduce silicon lifetime.
-
-* The thermal-zones node
-
-The "thermal-zones" node is a container for all thermal zone nodes. It shall
-contain only sub-nodes describing thermal zones as in the section
-"Thermal zone nodes". The "thermal-zones" node appears under "/".
-
-* Examples
-
-Below are several examples on how to use thermal data descriptors
-using device tree bindings:
-
-(a) - CPU thermal zone
-
-The CPU thermal zone example below describes how to setup one thermal zone
-using one single sensor as temperature source and many cooling devices and
-power dissipation control sources.
-
-#include <dt-bindings/thermal/thermal.h>
-
-cpus {
-	/*
-	 * Here is an example of describing a cooling device for a DVFS
-	 * capable CPU. The CPU node describes its four OPPs.
-	 * The cooling states possible are 0..3, and they are
-	 * used as OPP indexes. The minimum cooling state is 0, which means
-	 * all four OPPs can be available to the system. The maximum
-	 * cooling state is 3, which means only the lowest OPPs (198MHz@0.85V)
-	 * can be available in the system.
-	 */
-	cpu0: cpu@0 {
-		...
-		operating-points = <
-			/* kHz    uV */
-			970000  1200000
-			792000  1100000
-			396000  950000
-			198000  850000
-		>;
-		#cooling-cells = <2>; /* min followed by max */
-	};
-	...
-};
-
-&i2c1 {
-	...
-	/*
-	 * A simple fan controller which supports 10 speeds of operation
-	 * (represented as 0-9).
-	 */
-	fan0: fan@48 {
-		...
-		#cooling-cells = <2>; /* min followed by max */
-	};
-};
-
-ocp {
-	...
-	/*
-	 * A simple IC with a single bandgap temperature sensor.
-	 */
-	bandgap0: bandgap@0000ed00 {
-		...
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-thermal-zones {
-	cpu_thermal: cpu-thermal {
-		polling-delay-passive = <250>; /* milliseconds */
-		polling-delay = <1000>; /* milliseconds */
-
-		thermal-sensors = <&bandgap0>;
-
-		trips {
-			cpu_alert0: cpu-alert0 {
-				temperature = <90000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "active";
-			};
-			cpu_alert1: cpu-alert1 {
-				temperature = <100000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "passive";
-			};
-			cpu_crit: cpu-crit {
-				temperature = <125000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "critical";
-			};
-		};
-
-		cooling-maps {
-			map0 {
-				trip = <&cpu_alert0>;
-				cooling-device = <&fan0 THERMAL_NO_LIMIT 4>;
-			};
-			map1 {
-				trip = <&cpu_alert1>;
-				cooling-device = <&fan0 5 THERMAL_NO_LIMIT>, <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-			};
-		};
-	};
-};
-
-In the example above, the ADC sensor (bandgap0) at address 0x0000ED00 is
-used to monitor the zone 'cpu-thermal' using its sole sensor. A fan
-device (fan0) is controlled via I2C bus 1, at address 0x48, and has ten
-different cooling states 0-9. It is used to remove the heat out of
-the thermal zone 'cpu-thermal' using its cooling states
-from its minimum to 4, when it reaches trip point 'cpu_alert0'
-at 90C, as an example of active cooling. The same cooling device is used at
-'cpu_alert1', but from 5 to its maximum state. The cpu@0 device is also
-linked to the same thermal zone, 'cpu-thermal', as a passive cooling device,
-using all its cooling states at trip point 'cpu_alert1',
-which is a trip point at 100C. On the thermal zone 'cpu-thermal', at the
-temperature of 125C, represented by the trip point 'cpu_crit', the silicon
-is not reliable anymore.
-
-(b) - IC with several internal sensors
-
-The example below describes how to deploy several thermal zones based off a
-single sensor IC, assuming it has several internal sensors. This is a common
-case on SoC designs with several internal IPs that may need different thermal
-requirements, and thus may have their own sensor to monitor or detect internal
-hotspots in their silicon.
-
-#include <dt-bindings/thermal/thermal.h>
-
-ocp {
-	...
-	/*
-	 * A simple IC with several bandgap temperature sensors.
-	 */
-	bandgap0: bandgap@0000ed00 {
-		...
-		#thermal-sensor-cells = <1>;
-	};
-};
-
-thermal-zones {
-	cpu_thermal: cpu-thermal {
-		polling-delay-passive = <250>; /* milliseconds */
-		polling-delay = <1000>; /* milliseconds */
-
-				/* sensor       ID */
-		thermal-sensors = <&bandgap0     0>;
-
-		trips {
-			/* each zone within the SoC may have its own trips */
-			cpu_alert: cpu-alert {
-				temperature = <100000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "passive";
-			};
-			cpu_crit: cpu-crit {
-				temperature = <125000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "critical";
-			};
-		};
-
-		cooling-maps {
-			/* each zone within the SoC may have its own cooling */
-			...
-		};
-	};
-
-	gpu_thermal: gpu-thermal {
-		polling-delay-passive = <120>; /* milliseconds */
-		polling-delay = <1000>; /* milliseconds */
-
-				/* sensor       ID */
-		thermal-sensors = <&bandgap0     1>;
-
-		trips {
-			/* each zone within the SoC may have its own trips */
-			gpu_alert: gpu-alert {
-				temperature = <90000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "passive";
-			};
-			gpu_crit: gpu-crit {
-				temperature = <105000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "critical";
-			};
-		};
-
-		cooling-maps {
-			/* each zone within the SoC may have its own cooling */
-			...
-		};
-	};
-
-	dsp_thermal: dsp-thermal {
-		polling-delay-passive = <50>; /* milliseconds */
-		polling-delay = <1000>; /* milliseconds */
-
-				/* sensor       ID */
-		thermal-sensors = <&bandgap0     2>;
-
-		trips {
-			/* each zone within the SoC may have its own trips */
-			dsp_alert: dsp-alert {
-				temperature = <90000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "passive";
-			};
-			dsp_crit: gpu-crit {
-				temperature = <135000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "critical";
-			};
-		};
-
-		cooling-maps {
-			/* each zone within the SoC may have its own cooling */
-			...
-		};
-	};
-};
-
-In the example above, there is one bandgap IC which has the capability to
-monitor three sensors. The hardware has been designed so that sensors are
-placed on different places in the DIE to monitor different temperature
-hotspots: one for CPU thermal zone, one for GPU thermal zone and the
-other to monitor a DSP thermal zone.
-
-Thus, there is a need to assign each sensor provided by the bandgap IC
-to different thermal zones. This is achieved by means of using the
-#thermal-sensor-cells property and using the first cell of the sensor
-specifier as sensor ID. In the example, then, <bandgap 0> is used to
-monitor CPU thermal zone, <bandgap 1> is used to monitor GPU thermal
-zone and <bandgap 2> is used to monitor DSP thermal zone. Each zone
-may be uncorrelated, having its own dT/dt requirements, trips
-and cooling maps.
-
-
-(c) - Several sensors within one single thermal zone
-
-The example below illustrates how to use more than one sensor within
-one thermal zone.
-
-#include <dt-bindings/thermal/thermal.h>
-
-&i2c1 {
-	...
-	/*
-	 * A simple IC with a single temperature sensor.
-	 */
-	adc: sensor@49 {
-		...
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-ocp {
-	...
-	/*
-	 * A simple IC with a single bandgap temperature sensor.
-	 */
-	bandgap0: bandgap@0000ed00 {
-		...
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-thermal-zones {
-	cpu_thermal: cpu-thermal {
-		polling-delay-passive = <250>; /* milliseconds */
-		polling-delay = <1000>; /* milliseconds */
-
-		thermal-sensors = <&bandgap0>,	/* cpu */
-				  <&adc>;	/* pcb north */
-
-		/* hotspot = 100 * bandgap - 120 * adc + 484 */
-		coefficients =		<100	-120	484>;
-
-		trips {
-			...
-		};
-
-		cooling-maps {
-			...
-		};
-	};
-};
-
-In some cases, there is a need to use more than one sensor to extrapolate
-a thermal hotspot in the silicon. The above example illustrates this situation.
-For instance, it may be the case that a sensor external to CPU IP may be placed
-close to CPU hotspot and together with internal CPU sensor, it is used
-to determine the hotspot. Assuming this is the case for the above example,
-the hypothetical extrapolation rule would be:
-		hotspot = 100 * bandgap - 120 * adc + 484
-
-In other context, the same idea can be used to add fixed offset. For instance,
-consider the hotspot extrapolation rule below:
-		hotspot = 1 * adc + 6000
-
-In the above equation, the hotspot is always 6C higher than what is read
-from the ADC sensor. The binding would be then:
-        thermal-sensors =  <&adc>;
-
-		/* hotspot = 1 * adc + 6000 */
-	coefficients =		<1	6000>;
-
-(d) - Board thermal
-
-The board thermal example below illustrates how to setup one thermal zone
-with many sensors and many cooling devices.
-
-#include <dt-bindings/thermal/thermal.h>
-
-&i2c1 {
-	...
-	/*
-	 * An IC with several temperature sensor.
-	 */
-	adc_dummy: sensor@50 {
-		...
-		#thermal-sensor-cells = <1>; /* sensor internal ID */
-	};
-};
-
-thermal-zones {
-	batt-thermal {
-		polling-delay-passive = <500>; /* milliseconds */
-		polling-delay = <2500>; /* milliseconds */
-
-				/* sensor       ID */
-		thermal-sensors = <&adc_dummy     4>;
-
-		trips {
-			...
-		};
-
-		cooling-maps {
-			...
-		};
-	};
-
-	board_thermal: board-thermal {
-		polling-delay-passive = <1000>; /* milliseconds */
-		polling-delay = <2500>; /* milliseconds */
-
-				/* sensor       ID */
-		thermal-sensors = <&adc_dummy     0>, /* pcb top edge */
-				  <&adc_dummy     1>, /* lcd */
-				  <&adc_dummy     2>; /* back cover */
-		/*
-		 * An array of coefficients describing the sensor
-		 * linear relation. E.g.:
-		 * z = c1*x1 + c2*x2 + c3*x3
-		 */
-		coefficients =		<1200	-345	890>;
-
-		sustainable-power = <2500>;
-
-		trips {
-			/* Trips are based on resulting linear equation */
-			cpu_trip: cpu-trip {
-				temperature = <60000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "passive";
-			};
-			gpu_trip: gpu-trip {
-				temperature = <55000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "passive";
-			}
-			lcd_trip: lcp-trip {
-				temperature = <53000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "passive";
-			};
-			crit_trip: crit-trip {
-				temperature = <68000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "critical";
-			};
-		};
-
-		cooling-maps {
-			map0 {
-				trip = <&cpu_trip>;
-				cooling-device = <&cpu0 0 2>;
-				contribution = <55>;
-			};
-			map1 {
-				trip = <&gpu_trip>;
-				cooling-device = <&gpu0 0 2>;
-				contribution = <20>;
-			};
-			map2 {
-				trip = <&lcd_trip>;
-				cooling-device = <&lcd0 5 10>;
-				contribution = <15>;
-			};
-		};
-	};
-};
-
-The above example is a mix of previous examples, a sensor IP with several internal
-sensors used to monitor different zones, one of them is composed by several sensors and
-with different cooling devices.
diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
new file mode 100644
index 000000000000..ea14de80ec75
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AM654 VTM (DTS) binding
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    const: ti,am654-vtm
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    vtm: thermal@42050000 {
+        compatible = "ti,am654-vtm";
+        reg = <0x42050000 0x25c>;
+        power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+        #thermal-sensor-cells = <1>;
+    };
+
+    mpu0_thermal: mpu0_thermal {
+        polling-delay-passive = <250>; /* milliseconds */
+        polling-delay = <500>; /* milliseconds */
+        thermal-sensors = <&vtm0 0>;
+
+        trips {
+                mpu0_crit: mpu0_crit {
+                        temperature = <125000>; /* milliCelsius */
+                        hysteresis = <2000>; /* milliCelsius */
+                        type = "critical";
+                };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
new file mode 100644
index 000000000000..c74f124ebfc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments J72XX VTM (DTS) binding
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-vtm
+      - ti,j7200-vtm
+
+  reg:
+    items:
+      - description: VTM cfg1 register space
+      - description: VTM cfg2 register space
+      - description: VTM efuse register space
+
+  power-domains:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    wkup_vtm0: thermal-sensor@42040000 {
+        compatible = "ti,j721e-vtm";
+        reg = <0x42040000 0x350>,
+              <0x42050000 0x350>,
+              <0x43000300 0x10>;
+        power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+        #thermal-sensor-cells = <1>;
+    };
+
+    mpu_thermal: mpu-thermal {
+        polling-delay-passive = <250>; /* milliseconds */
+        polling-delay = <500>; /* milliseconds */
+        thermal-sensors = <&wkup_vtm0 0>;
+
+        trips {
+            mpu_crit: mpu-crit {
+                temperature = <125000>; /* milliCelsius */
+                hysteresis = <2000>; /* milliCelsius */
+                type = "critical";
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt b/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt
deleted file mode 100644
index ceb92a95727a..000000000000
--- a/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-* UniPhier Thermal bindings
-
-This describes the devicetree bindings for thermal monitor supported by
-PVT(Process, Voltage and Temperature) monitoring unit implemented on Socionext
-UniPhier SoCs.
-
-Required properties:
-- compatible :
-  - "socionext,uniphier-pxs2-thermal" : For UniPhier PXs2 SoC
-  - "socionext,uniphier-ld20-thermal" : For UniPhier LD20 SoC
-  - "socionext,uniphier-pxs3-thermal" : For UniPhier PXs3 SoC
-- interrupts : IRQ for the temperature alarm
-- #thermal-sensor-cells : Should be 0. See ./thermal.txt for details.
-
-Optional properties:
-- socionext,tmod-calibration: A pair of calibrated values referred from PVT,
-                              in case that the values aren't set on SoC,
-                              like a reference board.
-
-Example:
-
-	sysctrl@61840000 {
-		compatible = "socionext,uniphier-ld20-sysctrl",
-			     "simple-mfd", "syscon";
-		reg = <0x61840000 0x10000>;
-		...
-		pvtctl: pvtctl {
-			compatible = "socionext,uniphier-ld20-thermal";
-			interrupts = <0 3 1>;
-			#thermal-sensor-cells = <0>;
-		};
-		...
-	};
-
-	thermal-zones {
-		cpu_thermal {
-			polling-delay-passive = <250>;	/* 250ms */
-			polling-delay = <1000>;		/* 1000ms */
-			thermal-sensors = <&pvtctl>;
-
-			trips {
-				cpu_crit: cpu_crit {
-					temperature = <110000>;	/* 110C */
-					hysteresis = <2000>;
-					type = "critical";
-				};
-				cpu_alert: cpu_alert {
-					temperature = <100000>;	/* 100C */
-					hysteresis = <2000>;
-					type = "passive";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu_alert>;
-					cooling-device = <&cpu0 (-1) (-1)>;
-				};
-				map1 {
-					trip = <&cpu_alert>;
-					cooling-device = <&cpu2 (-1) (-1)>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
deleted file mode 100644
index 3dc1c6bf0478..000000000000
--- a/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
+++ /dev/null
@@ -1,116 +0,0 @@
-* ZTE zx2967 family Thermal
-
-Required Properties:
-- compatible: should be one of the following.
-    * zte,zx296718-thermal
-- reg: physical base address of the controller and length of memory mapped
-    region.
-- clocks : Pairs of phandle and specifier referencing the controller's clocks.
-- clock-names: "topcrm" for the topcrm clock.
-	       "apb" for the apb clock.
-- #thermal-sensor-cells: must be 0.
-
-Please note: slope coefficient defined in thermal-zones section need to be
-multiplied by 1000.
-
-Example for tempsensor:
-
-	tempsensor: tempsensor@148a000 {
-		compatible = "zte,zx296718-thermal";
-		reg = <0x0148a000 0x20>;
-		clocks = <&topcrm TEMPSENSOR_GATE>, <&audiocrm AUDIO_TS_PCLK>;
-		clock-names = "topcrm", "apb";
-		#thermal-sensor-cells = <0>;
-	};
-
-Example for cooling device:
-
-	cooling_dev: cooling_dev {
-		cluster0_cooling_dev: cluster0-cooling-dev {
-			#cooling-cells = <2>;
-			cpumask = <0xf>;
-			capacitance = <1500>;
-		};
-
-	cluster1_cooling_dev: cluster1-cooling-dev {
-			#cooling-cells = <2>;
-			cpumask = <0x30>;
-			capacitance = <2000>;
-		};
-	};
-
-Example for thermal zones:
-
-	thermal-zones {
-		zx296718_thermal: zx296718_thermal {
-			polling-delay-passive = <500>;
-			polling-delay = <1000>;
-			sustainable-power = <6500>;
-
-			thermal-sensors = <&tempsensor 0>;
-			/*
-			 * slope need to be multiplied by 1000.
-			 */
-			coefficients = <1951 (-922)>;
-
-			trips {
-				trip0: switch_on_temperature {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip1: desired_temperature {
-					temperature = <100000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				crit: critical_temperature {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&trip0>;
-					cooling-device = <&gpu 2 5>;
-				};
-
-				map1 {
-					trip = <&trip0>;
-					cooling-device = <&cluster0_cooling_dev 1 2>;
-				};
-
-				map2 {
-					trip = <&trip1>;
-					cooling-device = <&cluster0_cooling_dev 1 2>;
-				};
-
-				map3 {
-					trip = <&crit>;
-					cooling-device = <&cluster0_cooling_dev 1 2>;
-				};
-
-				map4 {
-					trip = <&trip0>;
-					cooling-device = <&cluster1_cooling_dev 1 2>;
-					contribution = <9000>;
-				};
-
-				map5 {
-					trip = <&trip1>;
-					cooling-device = <&cluster1_cooling_dev 1 2>;
-					contribution = <4096>;
-				};
-
-				map6 {
-					trip = <&crit>;
-					cooling-device = <&cluster1_cooling_dev 1 2>;
-					contribution = <4096>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
index d918cee100ac..b3538fac1ad2 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/timer/allwinner,sun4i-a10-timer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Timer Device Tree Bindings
+title: Allwinner A10 Timer
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -12,16 +12,26 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - allwinner,sun4i-a10-timer
-      - allwinner,sun8i-a23-timer
-      - allwinner,sun8i-v3s-timer
-      - allwinner,suniv-f1c100s-timer
+    oneOf:
+      - enum:
+          - allwinner,sun4i-a10-timer
+          - allwinner,sun8i-a23-timer
+          - allwinner,sun8i-v3s-timer
+          - allwinner,suniv-f1c100s-timer
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-timer
+              - allwinner,sun50i-a64-timer
+              - allwinner,sun50i-h6-timer
+              - allwinner,sun50i-h616-timer
+          - const: allwinner,sun8i-a23-timer
 
   reg:
     maxItems: 1
 
   interrupts:
+    minItems: 2
+    maxItems: 6
     description:
       List of timers interrupts
 
@@ -32,8 +42,8 @@ allOf:
   - if:
       properties:
         compatible:
-          items:
-            const: allwinner,sun4i-a10-timer
+          enum:
+            - allwinner,sun4i-a10-timer
 
     then:
       properties:
@@ -44,8 +54,8 @@ allOf:
   - if:
       properties:
         compatible:
-          items:
-            const: allwinner,sun8i-a23-timer
+          enum:
+            - allwinner,sun8i-a23-timer
 
     then:
       properties:
@@ -56,20 +66,9 @@ allOf:
   - if:
       properties:
         compatible:
-          items:
-            const: allwinner,sun8i-v3s-timer
-
-    then:
-      properties:
-        interrupts:
-          minItems: 3
-          maxItems: 3
-
-  - if:
-      properties:
-        compatible:
-          items:
-            const: allwinner,suniv-f1c100s-timer
+          enum:
+            - allwinner,sun8i-v3s-timer
+            - allwinner,suniv-f1c100s-timer
 
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml
index 40fc4bcb3145..f1853daec2f9 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/timer/allwinner,sun5i-a13-hstimer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A13 High-Speed Timer Device Tree Bindings
+title: Allwinner A13 High-Speed Timer
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -24,7 +24,6 @@ properties:
 
   interrupts:
     minItems: 2
-    maxItems: 4
     items:
       - description: Timer 0 Interrupt
       - description: Timer 1 Interrupt
@@ -46,8 +45,7 @@ required:
 if:
   properties:
     compatible:
-      items:
-        const: allwinner,sun5i-a13-hstimer
+      const: allwinner,sun5i-a13-hstimer
 
 then:
   properties:
diff --git a/Documentation/devicetree/bindings/timer/andestech,atcpit100-timer.txt b/Documentation/devicetree/bindings/timer/andestech,atcpit100-timer.txt
deleted file mode 100644
index 4c9ea5989e35..000000000000
--- a/Documentation/devicetree/bindings/timer/andestech,atcpit100-timer.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Andestech ATCPIT100 timer
-------------------------------------------------------------------
-ATCPIT100 is a generic IP block from Andes Technology, embedded in
-Andestech AE3XX platforms and other designs.
-
-This timer is a set of compact multi-function timers, which can be
-used as pulse width modulators (PWM) as well as simple timers.
-
-It supports up to 4 PIT channels. Each PIT channel is a
-multi-function timer and provide the following usage scenarios:
-One 32-bit timer
-Two 16-bit timers
-Four 8-bit timers
-One 16-bit PWM
-One 16-bit timer and one 8-bit PWM
-Two 8-bit timer and one 8-bit PWM
-
-Required properties:
-- compatible	: Should be "andestech,atcpit100"
-- reg		: Address and length of the register set
-- interrupts	: Reference to the timer interrupt
-- clocks 	: a clock to provide the tick rate for "andestech,atcpit100"
-- clock-names 	: should be "PCLK" for the peripheral clock source.
-
-Examples:
-
-timer0: timer@f0400000 {
-	compatible = "andestech,atcpit100";
-	reg = <0xf0400000 0x1000>;
-	interrupts = <2>;
-	clocks = <&apb>;
-	clock-names = "PCLK";
-};
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
index 6deead07728e..c5fc3b6c8bd0 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
@@ -22,23 +22,40 @@ properties:
   compatible:
     oneOf:
       - items:
-          - enum:
-              - arm,cortex-a15-timer
-          - enum:
-              - arm,armv7-timer
+          - const: arm,cortex-a15-timer
+          - const: arm,armv7-timer
       - items:
           - enum:
-            - arm,armv7-timer
+              - arm,armv7-timer
+              - arm,armv8-timer
       - items:
-          - enum:
-            - arm,armv8-timer
+          - const: arm,armv8-timer
+          - const: arm,armv7-timer
 
   interrupts:
+    minItems: 1
     items:
       - description: secure timer irq
       - description: non-secure timer irq
       - description: virtual timer irq
       - description: hypervisor timer irq
+      - description: hypervisor virtual timer irq
+
+  interrupt-names:
+    oneOf:
+      - minItems: 2
+        items:
+          - const: phys
+          - const: virt
+          - const: hyp-phys
+          - const: hyp-virt
+      - minItems: 3
+        items:
+          - const: sec-phys
+          - const: phys
+          - const: virt
+          - const: hyp-phys
+          - const: hyp-virt
 
   clock-frequency:
     description: The frequency of the main counter, in Hz. Should be present
@@ -51,6 +68,12 @@ properties:
     description: If present, the timer is powered through an always-on power
       domain, therefore it never loses context.
 
+  allwinner,erratum-unknown1:
+    type: boolean
+    description: Indicates the presence of an erratum found in Allwinner SoCs,
+      where reading certain values from the counter is unreliable. This also
+      affects writes to the tval register, due to the implicit counter read.
+
   fsl,erratum-a008585:
     type: boolean
     description: Indicates the presence of QorIQ erratum A-008585, which says
@@ -82,6 +105,8 @@ properties:
 required:
   - compatible
 
+additionalProperties: false
+
 oneOf:
   - required:
       - interrupts
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
index 102f319833d9..f6efa48c4256 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -20,7 +20,7 @@ properties:
   compatible:
     items:
       - enum:
-        - arm,armv7-timer-mem
+          - arm,armv7-timer-mem
 
   reg:
     maxItems: 1
@@ -32,6 +32,8 @@ properties:
   '#size-cells':
     const: 1
 
+  ranges: true
+
   clock-frequency:
     description: The frequency of the main counter, in Hz. Should be present
       only where necessary to work around broken firmware which does not configure
@@ -60,24 +62,22 @@ properties:
 patternProperties:
   '^frame@[0-9a-z]*$':
     type: object
+    additionalProperties: false
     description: A timer node has up to 8 frame sub-nodes, each with the following properties.
     properties:
       frame-number:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 7
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 7
 
       interrupts:
         minItems: 1
-        maxItems: 2
         items:
           - description: physical timer irq
           - description: virtual timer irq
 
-      reg :
+      reg:
         minItems: 1
-        maxItems: 2
         items:
           - description: 1st view base address
           - description: 2nd optional view base address
@@ -93,6 +93,8 @@ required:
   - '#address-cells'
   - '#size-cells'
 
+additionalProperties: false
+
 examples:
   - |
     timer@f0000000 {
diff --git a/Documentation/devicetree/bindings/timer/arm,armv7m-systick.txt b/Documentation/devicetree/bindings/timer/arm,armv7m-systick.txt
deleted file mode 100644
index 7cf4a24601eb..000000000000
--- a/Documentation/devicetree/bindings/timer/arm,armv7m-systick.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* ARMv7M System Timer
-
-ARMv7-M includes a system timer, known as SysTick. Current driver only
-implements the clocksource feature.
-
-Required properties:
-- compatible	  : Should be "arm,armv7m-systick"
-- reg		  : The address range of the timer
-
-Required clocking property, have to be one of:
-- clocks	  : The input clock of the timer
-- clock-frequency : The rate in HZ in input of the ARM SysTick
-
-Examples:
-
-systick: timer@e000e010 {
-	compatible = "arm,armv7m-systick";
-	reg = <0xe000e010 0x10>;
-	clocks = <&clk_systick>;
-};
-
-systick: timer@e000e010 {
-	compatible = "arm,armv7m-systick";
-	reg = <0xe000e010 0x10>;
-	clock-frequency = <90000000>;
-};
diff --git a/Documentation/devicetree/bindings/timer/arm,armv7m-systick.yaml b/Documentation/devicetree/bindings/timer/arm,armv7m-systick.yaml
new file mode 100644
index 000000000000..2bcade5d8ac6
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,armv7m-systick.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/arm,armv7m-systick.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARMv7M System Timer
+
+maintainers:
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+description: ARMv7-M includes a system timer, known as SysTick.
+
+properties:
+  compatible:
+    const: arm,armv7m-systick
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+oneOf:
+  - required:
+      - clocks
+  - required:
+      - clock-frequency
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@e000e010 {
+        compatible = "arm,armv7m-systick";
+        reg = <0xe000e010 0x10>;
+        clocks = <&clk_systick>;
+    };
+
+  - |
+    timer@e000e010 {
+        compatible = "arm,armv7m-systick";
+        reg = <0xe000e010 0x10>;
+        clock-frequency = <90000000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
index 21c24a8e28fd..4956c8f409d2 100644
--- a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
@@ -35,6 +35,8 @@ required:
   - reg
   - clocks
 
+additionalProperties: false
+
 examples:
   - |
     timer@2c000600 {
diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.txt b/Documentation/devicetree/bindings/timer/arm,sp804.txt
deleted file mode 100644
index 5cd8eee74af1..000000000000
--- a/Documentation/devicetree/bindings/timer/arm,sp804.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-ARM sp804 Dual Timers
----------------------------------------
-
-Required properties:
-- compatible: Should be "arm,sp804" & "arm,primecell"
-- interrupts: Should contain the list of Dual Timer interrupts. This is the
-	interrupt for timer 1 and timer 2. In the case of a single entry, it is
-	the combined interrupt or if "arm,sp804-has-irq" is present that
-	specifies which timer interrupt is connected.
-- reg: Should contain location and length for dual timer register.
-- clocks: clocks driving the dual timer hardware. This list should be 1 or 3
-	clocks.	With 3 clocks, the order is timer0 clock, timer1 clock,
-	apb_pclk. A single clock can also be specified if the same clock is
-	used for all clock inputs.
-
-Optional properties:
-- arm,sp804-has-irq = <#>: In the case of only 1 timer irq line connected, this
-	specifies if the irq connection is for timer 1 or timer 2. A value of 1
-	or 2 should be used.
-
-Example:
-
-	timer0: timer@fc800000 {
-		compatible = "arm,sp804", "arm,primecell";
-		reg = <0xfc800000 0x1000>;
-		interrupts = <0 0 4>, <0 1 4>;
-		clocks = <&timclk1 &timclk2 &pclk>;
-		clock-names = "timer1", "timer2", "apb_pclk";
-	};
diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.yaml b/Documentation/devicetree/bindings/timer/arm,sp804.yaml
new file mode 100644
index 000000000000..41be7cdab2ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,sp804.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/arm,sp804.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM sp804 Dual Timers
+
+maintainers:
+  - Haojian Zhuang <haojian.zhuang@linaro.org>
+
+description: |+
+  The Arm SP804 IP implements two independent timers, configurable for
+  16 or 32 bit operation and capable of running in one-shot, periodic, or
+  free-running mode. The input clock is shared, but can be gated and prescaled
+  independently for each timer.
+
+  There is a viriant of Arm SP804: Hisilicon 64-bit SP804 timer. Some Hisilicon
+  SoCs, such as Hi1212, should use the dedicated compatible: "hisilicon,sp804".
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,sp804
+          - hisilicon,sp804
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,sp804
+          - hisilicon,sp804
+      - const: arm,primecell
+
+  interrupts:
+    description: |
+      If two interrupts are listed, those are the interrupts for timer
+      1 and 2, respectively. If there is only a single interrupt, it is
+      either a combined interrupt or the sole interrupt of one timer, as
+      specified by the "arm,sp804-has-irq" property.
+    minItems: 1
+    maxItems: 2
+
+  reg:
+    description: The physical base address of the SP804 IP.
+    maxItems: 1
+
+  clocks:
+    description: |
+      Clocks driving the dual timer hardware. This list should
+      be 1 or 3 clocks. With 3 clocks, the order is timer0 clock, timer1
+      clock, apb_pclk. A single clock can also be specified if the same
+      clock is used for all clock inputs.
+    oneOf:
+      - items:
+          - description: clock for timer 1
+          - description: clock for timer 2
+          - description: bus clock
+      - items:
+          - description: unified clock for both timers and the bus
+
+  clock-names: true
+    # The original binding did not specify any clock names, and there is no
+    # consistent naming used in the existing DTs. The primecell binding
+    # requires the "apb_pclk" name, so we need this property.
+    # Use "timer0clk", "timer1clk", "apb_pclk" for new DTs.
+
+  arm,sp804-has-irq:
+    description: If only one interrupt line is connected to the interrupt
+      controller, this property specifies which timer is connected to this
+      line.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 2
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    timer0: timer@fc800000 {
+        compatible = "arm,sp804", "arm,primecell";
+        reg = <0xfc800000 0x1000>;
+        interrupts = <0 0 4>, <0 1 4>;
+        clocks = <&timclk1>, <&timclk2>, <&pclk>;
+        clock-names = "timer1", "timer2", "apb_pclk";
+    };
diff --git a/Documentation/devicetree/bindings/timer/arm,twd-timer.yaml b/Documentation/devicetree/bindings/timer/arm,twd-timer.yaml
new file mode 100644
index 000000000000..5684df6448ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,twd-timer.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/arm,twd-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Timer-Watchdog Timer
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  ARM 11MP, Cortex-A5 and Cortex-A9 are often associated with a per-core
+  Timer-Watchdog (aka TWD), which provides both a per-cpu local timer
+  and watchdog.
+
+  The TWD is usually attached to a GIC to deliver its two per-processor
+  interrupts.
+
+properties:
+  compatible:
+    enum:
+      - arm,cortex-a9-twd-timer
+      - arm,cortex-a5-twd-timer
+      - arm,arm11mp-twd-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  always-on:
+    description:
+      If present, the timer is powered through an always-on power domain,
+      therefore it never loses context.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@2c000600 {
+            compatible = "arm,arm11mp-twd-timer";
+            reg = <0x2c000600 0x20>;
+            interrupts = <GIC_PPI 13 0xf01>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/arm,twd.txt b/Documentation/devicetree/bindings/timer/arm,twd.txt
deleted file mode 100644
index 383ea19c2bf0..000000000000
--- a/Documentation/devicetree/bindings/timer/arm,twd.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* ARM Timer Watchdog
-
-ARM 11MP, Cortex-A5 and Cortex-A9 are often associated with a per-core
-Timer-Watchdog (aka TWD), which provides both a per-cpu local timer
-and watchdog.
-
-The TWD is usually attached to a GIC to deliver its two per-processor
-interrupts.
-
-** Timer node required properties:
-
-- compatible : Should be one of:
-	"arm,cortex-a9-twd-timer"
-	"arm,cortex-a5-twd-timer"
-	"arm,arm11mp-twd-timer"
-
-- interrupts : One interrupt to each core
-
-- reg : Specify the base address and the size of the TWD timer
-	register window.
-
-Optional
-
-- always-on : a boolean property. If present, the timer is powered through
-  an always-on power domain, therefore it never loses context.
-
-Example:
-
-	twd-timer@2c000600 {
-		compatible = "arm,arm11mp-twd-timer"";
-		reg = <0x2c000600 0x20>;
-		interrupts = <1 13 0xf01>;
-	};
-
-** Watchdog node properties:
-
-- compatible : Should be one of:
-	"arm,cortex-a9-twd-wdt"
-	"arm,cortex-a5-twd-wdt"
-	"arm,arm11mp-twd-wdt"
-
-- interrupts : One interrupt to each core
-
-- reg : Specify the base address and the size of the TWD watchdog
-	register window.
-
-Example:
-
-	twd-watchdog@2c000620 {
-		compatible = "arm,arm11mp-twd-wdt";
-		reg = <0x2c000620 0x20>;
-		interrupts = <1 14 0xf01>;
-	};
diff --git a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
deleted file mode 100644
index eeee6cd51e5c..000000000000
--- a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Cadence TTC - Triple Timer Counter
-
-Required properties:
-- compatible : Should be "cdns,ttc".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 3 interrupts; one per timer channel.
-- clocks: phandle to the source clock
-
-Optional properties:
-- timer-width: Bit width of the timer, necessary if not 16.
-
-Example:
-
-ttc0: ttc0@f8001000 {
-	interrupt-parent = <&intc>;
-	interrupts = < 0 10 4 0 11 4 0 12 4 >;
-	compatible = "cdns,ttc";
-	reg = <0xF8001000 0x1000>;
-	clocks = <&cpu_clk 3>;
-	timer-width = <32>;
-};
diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
new file mode 100644
index 000000000000..7d821fd480f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/cdns,ttc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence TTC - Triple Timer Counter
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+properties:
+  compatible:
+    const: cdns,ttc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+    description: |
+      A list of 3 interrupts; one per timer channel.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  timer-width:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: |
+      Bit width of the timer, necessary if not 16.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    ttc0: ttc0@f8001000 {
+        interrupt-parent = <&intc>;
+        interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
+        compatible = "cdns,ttc";
+        reg = <0xF8001000 0x1000>;
+        clocks = <&cpu_clk 3>;
+        timer-width = <32>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/csky,mptimer.txt b/Documentation/devicetree/bindings/timer/csky,mptimer.txt
index 15cfec08fbb8..f5c7e99cf52b 100644
--- a/Documentation/devicetree/bindings/timer/csky,mptimer.txt
+++ b/Documentation/devicetree/bindings/timer/csky,mptimer.txt
@@ -8,7 +8,7 @@ regs is accessed by cpu co-processor 4 registers with mtcr/mfcr.
  - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer.
  - PTIM_TSR  "cr<1, 14>" Interrupt cleanup status reg.
  - PTIM_CCVR "cr<3, 14>" Current counter value reg.
- - PTIM_LVR  "cr<6, 14>" Window value reg to triger next event.
+ - PTIM_LVR  "cr<6, 14>" Window value reg to trigger next event.
 
 ==============================
 timer node bindings definition
diff --git a/Documentation/devicetree/bindings/timer/energymicro,efm32-timer.txt b/Documentation/devicetree/bindings/timer/energymicro,efm32-timer.txt
deleted file mode 100644
index e502c11b2211..000000000000
--- a/Documentation/devicetree/bindings/timer/energymicro,efm32-timer.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* EFM32 timer hardware
-
-The efm32 Giant Gecko SoCs come with four 16 bit timers. Two counters can be
-connected to form a 32 bit counter. Each timer has three Compare/Capture
-channels and can be used as PWM or Quadrature Decoder. Available clock sources
-are the cpu's HFPERCLK (with a 10-bit prescaler) or an external pin.
-
-Required properties:
-- compatible : Should be "energymicro,efm32-timer"
-- reg : Address and length of the register set
-- clocks : Should contain a reference to the HFPERCLK
-
-Optional properties:
-- interrupts : Reference to the timer interrupt
-
-Example:
-
-timer@40010c00 {
-	compatible = "energymicro,efm32-timer";
-	reg = <0x40010c00 0x400>;
-	interrupts = <14>;
-	clocks = <&cmu clk_HFPERCLKTIMER3>;
-};
diff --git a/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt
index 195792270414..3cb2f4c98d64 100644
--- a/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt
+++ b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt
@@ -11,6 +11,7 @@ Required properties:
   "moxa,moxart-timer", "faraday,fttmr010"
   "aspeed,ast2400-timer"
   "aspeed,ast2500-timer"
+  "aspeed,ast2600-timer"
 
 - reg : Should contain registers location and length
 - interrupts : Should contain the three timer interrupts usually with
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
deleted file mode 100644
index 5d8fd5b52598..000000000000
--- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Freescale i.MX General Purpose Timer (GPT)
-
-Required properties:
-
-- compatible : should be one of following:
-  for i.MX1:
-  - "fsl,imx1-gpt";
-  for i.MX21:
-  - "fsl,imx21-gpt";
-  for i.MX27:
-  - "fsl,imx27-gpt", "fsl,imx21-gpt";
-  for i.MX31:
-  - "fsl,imx31-gpt";
-  for i.MX25:
-  - "fsl,imx25-gpt", "fsl,imx31-gpt";
-  for i.MX50:
-  - "fsl,imx50-gpt", "fsl,imx31-gpt";
-  for i.MX51:
-  - "fsl,imx51-gpt", "fsl,imx31-gpt";
-  for i.MX53:
-  - "fsl,imx53-gpt", "fsl,imx31-gpt";
-  for i.MX6Q:
-  - "fsl,imx6q-gpt", "fsl,imx31-gpt";
-  for i.MX6DL:
-  - "fsl,imx6dl-gpt";
-  for i.MX6SL:
-  - "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
-  for i.MX6SX:
-  - "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
-- reg : specifies base physical address and size of the registers.
-- interrupts : should be the gpt interrupt.
-- clocks : the clocks provided by the SoC to drive the timer, must contain
-           an entry for each entry in clock-names.
-- clock-names : must include "ipg" entry first, then "per" entry.
-
-Example:
-
-gpt1: timer@10003000 {
-	compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
-	reg = <0x10003000 0x1000>;
-	interrupts = <26>;
-	clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
-		 <&clks IMX27_CLK_PER1_GATE>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
new file mode 100644
index 000000000000..a4f51f46b7a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/fsl,imxgpt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Purpose Timer (GPT)
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx1-gpt
+      - const: fsl,imx21-gpt
+      - items:
+          - const: fsl,imx27-gpt
+          - const: fsl,imx21-gpt
+      - const: fsl,imx31-gpt
+      - items:
+          - enum:
+              - fsl,imx25-gpt
+              - fsl,imx50-gpt
+              - fsl,imx51-gpt
+              - fsl,imx53-gpt
+              - fsl,imx6q-gpt
+          - const: fsl,imx31-gpt
+      - const: fsl,imx6dl-gpt
+      - items:
+          - enum:
+              - fsl,imx6sl-gpt
+              - fsl,imx6sx-gpt
+          - const: fsl,imx6dl-gpt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC GPT ipg clock
+      - description: SoC GPT per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx27-clock.h>
+
+    timer@10003000 {
+        compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+        reg = <0x10003000 0x1000>;
+        interrupts = <26>;
+        clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
+                 <&clks IMX27_CLK_PER1_GATE>;
+        clock-names = "ipg", "per";
+    };
diff --git a/Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml b/Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
new file mode 100644
index 000000000000..d33d90f44d28
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/hpe,gxp-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP Timer
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+  - Jean-Marie Verdun <verdun@hpe.com>
+
+properties:
+  compatible:
+    const: hpe,gxp-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: iop
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@c0000000 {
+        compatible = "hpe,gxp-timer";
+        reg = <0x80 0x16>;
+        interrupts = <0>;
+        interrupt-parent = <&vic0>;
+        clocks = <&iopclk>;
+        clock-names = "iop";
+    };
diff --git a/Documentation/devicetree/bindings/timer/ingenic,sysost.yaml b/Documentation/devicetree/bindings/timer/ingenic,sysost.yaml
new file mode 100644
index 000000000000..98648bf9e151
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,sysost.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ingenic,sysost.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for SYSOST in Ingenic XBurst family SoCs
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+  The SYSOST in an Ingenic SoC provides one 64bit timer for clocksource
+  and one or more 32bit timers for clockevent.
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - ingenic,x1000-ost
+      - ingenic,x2000-ost
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ost
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,x1000-cgu.h>
+
+    ost: timer@12000000 {
+        compatible = "ingenic,x1000-ost";
+        reg = <0x12000000 0x3c>;
+
+        #clock-cells = <1>;
+
+        clocks = <&cgu X1000_CLK_OST>;
+        clock-names = "ost";
+
+        interrupt-parent = <&cpuintc>;
+        interrupts = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
deleted file mode 100644
index 0b63cebc5f45..000000000000
--- a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
+++ /dev/null
@@ -1,137 +0,0 @@
-Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
-==========================================================
-
-For a description of the TCU hardware and drivers, have a look at
-Documentation/mips/ingenic-tcu.rst.
-
-Required properties:
-
-- compatible: Must be one of:
-  * ingenic,jz4740-tcu
-  * ingenic,jz4725b-tcu
-  * ingenic,jz4770-tcu
-  followed by "simple-mfd".
-- reg: Should be the offset/length value corresponding to the TCU registers
-- clocks: List of phandle & clock specifiers for clocks external to the TCU.
-  The "pclk", "rtc" and "ext" clocks should be provided. The "tcu" clock
-  should be provided if the SoC has it.
-- clock-names: List of name strings for the external clocks.
-- #clock-cells: Should be <1>;
-  Clock consumers specify this argument to identify a clock. The valid values
-  may be found in <dt-bindings/clock/ingenic,tcu.h>.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value should be 1.
-- interrupts : Specifies the interrupt the controller is connected to.
-
-Optional properties:
-
-- ingenic,pwm-channels-mask: Bitmask of TCU channels reserved for PWM use.
-  Default value is 0xfc.
-
-
-Children nodes
-==========================================================
-
-
-PWM node:
----------
-
-Required properties:
-
-- compatible: Must be one of:
-  * ingenic,jz4740-pwm
-  * ingenic,jz4725b-pwm
-- #pwm-cells: Should be 3. See ../pwm/pwm.yaml for a description of the cell
-  format.
-- clocks: List of phandle & clock specifiers for the TCU clocks.
-- clock-names: List of name strings for the TCU clocks.
-
-
-Watchdog node:
---------------
-
-Required properties:
-
-- compatible: Must be "ingenic,jz4740-watchdog"
-- clocks: phandle to the WDT clock
-- clock-names: should be "wdt"
-
-
-OS Timer node:
----------
-
-Required properties:
-
-- compatible: Must be one of:
-  * ingenic,jz4725b-ost
-  * ingenic,jz4770-ost
-- clocks: phandle to the OST clock
-- clock-names: should be "ost"
-- interrupts : Specifies the interrupt the OST is connected to.
-
-
-Example
-==========================================================
-
-#include <dt-bindings/clock/jz4770-cgu.h>
-#include <dt-bindings/clock/ingenic,tcu.h>
-
-/ {
-	tcu: timer@10002000 {
-		compatible = "ingenic,jz4770-tcu", "simple-mfd";
-		reg = <0x10002000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x10002000 0x1000>;
-
-		#clock-cells = <1>;
-
-		clocks = <&cgu JZ4770_CLK_RTC
-			  &cgu JZ4770_CLK_EXT
-			  &cgu JZ4770_CLK_PCLK>;
-		clock-names = "rtc", "ext", "pclk";
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <27 26 25>;
-
-		watchdog: watchdog@0 {
-			compatible = "ingenic,jz4740-watchdog";
-			reg = <0x0 0xc>;
-
-			clocks = <&tcu TCU_CLK_WDT>;
-			clock-names = "wdt";
-		};
-
-		pwm: pwm@40 {
-			compatible = "ingenic,jz4740-pwm";
-			reg = <0x40 0x80>;
-
-			#pwm-cells = <3>;
-
-			clocks = <&tcu TCU_CLK_TIMER0
-				  &tcu TCU_CLK_TIMER1
-				  &tcu TCU_CLK_TIMER2
-				  &tcu TCU_CLK_TIMER3
-				  &tcu TCU_CLK_TIMER4
-				  &tcu TCU_CLK_TIMER5
-				  &tcu TCU_CLK_TIMER6
-				  &tcu TCU_CLK_TIMER7>;
-			clock-names = "timer0", "timer1", "timer2", "timer3",
-				      "timer4", "timer5", "timer6", "timer7";
-		};
-
-		ost: timer@e0 {
-			compatible = "ingenic,jz4770-ost";
-			reg = <0xe0 0x20>;
-
-			clocks = <&tcu TCU_CLK_OST>;
-			clock-names = "ost";
-
-			interrupts = <15>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
new file mode 100644
index 000000000000..a84fef0fe628
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
@@ -0,0 +1,302 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ingenic,tcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs Timer/Counter Unit (TCU) devicetree bindings
+
+description: |
+  For a description of the TCU hardware and drivers, have a look at
+  Documentation/mips/ingenic-tcu.rst.
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ingenic,jz4740-tcu
+          - ingenic,jz4725b-tcu
+          - ingenic,jz4760-tcu
+          - ingenic,jz4760b-tcu
+          - ingenic,jz4770-tcu
+          - ingenic,jz4780-tcu
+          - ingenic,x1000-tcu
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^timer@[0-9a-f]+$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller: true
+
+  ranges: true
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ingenic,jz4740-tcu
+              - ingenic,jz4725b-tcu
+              - ingenic,jz4760-tcu
+              - ingenic,x1000-tcu
+          - const: simple-mfd
+      - items:
+          - enum:
+              - ingenic,jz4780-tcu
+              - ingenic,jz4770-tcu
+              - ingenic,jz4760b-tcu
+          - const: ingenic,jz4760-tcu
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RTC clock
+      - description: EXT clock
+      - description: PCLK clock
+      - description: TCU clock
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: rtc
+      - const: ext
+      - const: pclk
+      - const: tcu
+    minItems: 3
+
+  interrupts:
+    items:
+      - description: TCU0 interrupt
+      - description: TCU1 interrupt
+      - description: TCU2 interrupt
+    minItems: 1
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 8
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 8
+
+  assigned-clock-rates:
+    minItems: 1
+    maxItems: 8
+
+  ingenic,pwm-channels-mask:
+    description: Bitmask of TCU channels reserved for PWM use.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x00
+    maximum: 0xff
+    default: 0xfc
+
+patternProperties:
+  "^watchdog@[a-f0-9]+$":
+    type: object
+    $ref: /schemas/watchdog/watchdog.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          - enum:
+              - ingenic,jz4740-watchdog
+              - ingenic,jz4780-watchdog
+          - items:
+              - enum:
+                  - ingenic,jz4770-watchdog
+                  - ingenic,jz4760b-watchdog
+                  - ingenic,jz4760-watchdog
+                  - ingenic,jz4725b-watchdog
+              - const: ingenic,jz4740-watchdog
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: wdt
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+
+  "^pwm@[a-f0-9]+$":
+    type: object
+    $ref: /schemas/pwm/pwm.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          - enum:
+              - ingenic,jz4740-pwm
+              - ingenic,jz4725b-pwm
+              - ingenic,x1000-pwm
+          - items:
+              - enum:
+                  - ingenic,jz4760-pwm
+                  - ingenic,jz4760b-pwm
+                  - ingenic,jz4770-pwm
+                  - ingenic,jz4780-pwm
+              - const: ingenic,jz4740-pwm
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        minItems: 6
+        maxItems: 8
+
+      clock-names:
+        items:
+          - const: timer0
+          - const: timer1
+          - const: timer2
+          - const: timer3
+          - const: timer4
+          - const: timer5
+          - const: timer6
+          - const: timer7
+        minItems: 6
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+
+  "^timer@[a-f0-9]+$":
+    type: object
+    properties:
+      compatible:
+        oneOf:
+          - enum:
+              - ingenic,jz4725b-ost
+              - ingenic,jz4760b-ost
+          - items:
+              - const: ingenic,jz4760-ost
+              - const: ingenic,jz4725b-ost
+          - items:
+              - enum:
+                  - ingenic,jz4780-ost
+                  - ingenic,jz4770-ost
+              - const: ingenic,jz4760b-ost
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: ost
+
+      interrupts:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+      - interrupts
+
+    additionalProperties: false
+
+required:
+  - "#clock-cells"
+  - "#interrupt-cells"
+  - interrupt-controller
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,tcu.h>
+    tcu: timer@10002000 {
+      compatible = "ingenic,jz4770-tcu", "ingenic,jz4760-tcu", "simple-mfd";
+      reg = <0x10002000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0x0 0x10002000 0x1000>;
+
+      #clock-cells = <1>;
+
+      clocks = <&cgu JZ4770_CLK_RTC>,
+               <&cgu JZ4770_CLK_EXT>,
+               <&cgu JZ4770_CLK_PCLK>;
+      clock-names = "rtc", "ext", "pclk";
+
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <27 26 25>;
+
+      watchdog: watchdog@0 {
+        compatible = "ingenic,jz4770-watchdog", "ingenic,jz4740-watchdog";
+        reg = <0x0 0xc>;
+
+        clocks = <&tcu TCU_CLK_WDT>;
+        clock-names = "wdt";
+      };
+
+      pwm: pwm@40 {
+        compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
+        reg = <0x40 0x80>;
+
+        #pwm-cells = <3>;
+
+        clocks = <&tcu TCU_CLK_TIMER0>,
+                 <&tcu TCU_CLK_TIMER1>,
+                 <&tcu TCU_CLK_TIMER2>,
+                 <&tcu TCU_CLK_TIMER3>,
+                 <&tcu TCU_CLK_TIMER4>,
+                 <&tcu TCU_CLK_TIMER5>,
+                 <&tcu TCU_CLK_TIMER6>,
+                 <&tcu TCU_CLK_TIMER7>;
+        clock-names = "timer0", "timer1", "timer2", "timer3",
+                "timer4", "timer5", "timer6", "timer7";
+      };
+
+      ost: timer@e0 {
+        compatible = "ingenic,jz4770-ost", "ingenic,jz4760b-ost";
+        reg = <0xe0 0x20>;
+
+        clocks = <&tcu TCU_CLK_OST>;
+        clock-names = "ost";
+
+        interrupts = <15>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
index 2807225db902..f32575d4b5aa 100644
--- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
@@ -18,11 +18,10 @@ properties:
       - const: intel,ixp4xx-timer
 
   reg:
-    description: Should contain registers location and length
+    maxItems: 1
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: Timer 1 interrupt
       - description: Timer 2 interrupt
@@ -32,6 +31,8 @@ required:
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
index 0d256486f886..8bbb6e94508b 100644
--- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
+++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
@@ -1,7 +1,8 @@
 MediaTek Timers
 ---------------
 
-MediaTek SoCs have two different timers on different platforms,
+MediaTek SoCs have different timers on different platforms,
+- CPUX (ARM/ARM64 System Timer)
 - GPT (General Purpose Timer)
 - SYST (System Timer)
 
@@ -12,6 +13,7 @@ Required properties:
 	For those SoCs that use GPT
 	* "mediatek,mt2701-timer" for MT2701 compatible timers (GPT)
 	* "mediatek,mt6580-timer" for MT6580 compatible timers (GPT)
+	* "mediatek,mt6582-timer" for MT6582 compatible timers (GPT)
 	* "mediatek,mt6589-timer" for MT6589 compatible timers (GPT)
 	* "mediatek,mt7623-timer" for MT7623 compatible timers (GPT)
 	* "mediatek,mt8127-timer" for MT8127 compatible timers (GPT)
@@ -22,9 +24,16 @@ Required properties:
 
 	For those SoCs that use SYST
 	* "mediatek,mt8183-timer" for MT8183 compatible timers (SYST)
+	* "mediatek,mt8186-timer" for MT8186 compatible timers (SYST)
+	* "mediatek,mt8188-timer" for MT8188 compatible timers (SYST)
+	* "mediatek,mt8192-timer" for MT8192 compatible timers (SYST)
+	* "mediatek,mt8195-timer" for MT8195 compatible timers (SYST)
 	* "mediatek,mt7629-timer" for MT7629 compatible timers (SYST)
 	* "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST)
 
+	For those SoCs that use CPUX
+	* "mediatek,mt6795-systimer" for MT6795 compatible timers (CPUX)
+
 - reg: Should contain location and length for timer register.
 - clocks: Should contain system clock.
 
diff --git a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt
deleted file mode 100644
index b8f02c663521..000000000000
--- a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Marvell MMP Timer controller
-
-Required properties:
-- compatible : Should be "mrvl,mmp-timer".
-- reg : Address and length of the register set of timer controller.
-- interrupts : Should be the interrupt number.
-
-Optional properties:
-- clocks : Should contain a single entry describing the clock input.
-
-Example:
-	timer0: timer@d4014000 {
-		compatible = "mrvl,mmp-timer";
-		reg = <0xd4014000 0x100>;
-		interrupts = <13>;
-		clocks = <&coreclk 2>;
-	};
diff --git a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml
new file mode 100644
index 000000000000..1fbc260a0cbd
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/mrvl,mmp-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP Timer bindings
+
+maintainers:
+  - Daniel Lezcano <daniel.lezcano@linaro.org>
+  - Thomas Gleixner <tglx@linutronix.de>
+  - Rob Herring <robh+dt@kernel.org>
+
+properties:
+  $nodename:
+    pattern: '^timer@[a-f0-9]+$'
+
+  compatible:
+    const: mrvl,mmp-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@d4014000 {
+        compatible = "mrvl,mmp-timer";
+        reg = <0xd4014000 0x100>;
+        interrupts = <13>;
+        clocks = <&coreclk 2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/mstar,msc313e-timer.yaml b/Documentation/devicetree/bindings/timer/mstar,msc313e-timer.yaml
new file mode 100644
index 000000000000..f118ca423e38
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/mstar,msc313e-timer.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/mstar,msc313e-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mstar MSC313e Timer
+
+maintainers:
+  - Daniel Palmer <daniel@0x0f.com>
+  - Romain Perier <romain.perier@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mstar,msc313e-timer
+      - sstar,ssd20xd-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@6040 {
+        compatible = "mstar,msc313e-timer";
+        reg = <0x6040 0x40>;
+        clocks = <&xtal_div2>;
+        interrupts-extended = <&intc_fiq GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
deleted file mode 100644
index ea22dfe485be..000000000000
--- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Nuvoton NPCM7xx timer
-
-Nuvoton NPCM7xx have three timer modules, each timer module provides five 24-bit
-timer counters.
-
-Required properties:
-- compatible      : "nuvoton,npcm750-timer" for Poleg NPCM750.
-- reg             : Offset and length of the register set for the device.
-- interrupts      : Contain the timer interrupt with flags for
-                    falling edge.
-- clocks          : phandle of timer reference clock (usually a 25 MHz clock).
-
-Example:
-
-timer@f0008000 {
-    compatible = "nuvoton,npcm750-timer";
-    interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-    reg = <0xf0008000 0x50>;
-    clocks = <&clk NPCM7XX_CLK_TIMER>;
-};
-
diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml
new file mode 100644
index 000000000000..737af78ad70c
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nuvoton,npcm7xx-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM7xx timer
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,wpcm450-timer  # for Hermon WPCM450
+      - nuvoton,npcm750-timer  # for Poleg NPCM750
+      - nuvoton,npcm845-timer  # for Arbel NPCM845
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: The timer interrupt of timer 0
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    timer@f0008000 {
+        compatible = "nuvoton,npcm750-timer";
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+        reg = <0xf0008000 0x50>;
+        clocks = <&clk NPCM7XX_CLK_TIMER>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
new file mode 100644
index 000000000000..b78209cd0f28
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/timer/nvidia,tegra-timer.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra timer
+
+maintainers:
+  - Stephen Warren <swarren@nvidia.com>
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-timer
+    then:
+      properties:
+        interrupts:
+          # Either a single combined interrupt or up to 14 individual interrupts
+          minItems: 1
+          maxItems: 14
+          description: >
+            A list of 14 interrupts; one per each timer channels 0 through 13
+
+  - if:
+      properties:
+        compatible:
+          oneOf:
+            - items:
+                - enum:
+                    - nvidia,tegra114-timer
+                    - nvidia,tegra124-timer
+                    - nvidia,tegra132-timer
+                - const: nvidia,tegra30-timer
+            - items:
+                - const: nvidia,tegra30-timer
+                - const: nvidia,tegra20-timer
+    then:
+      properties:
+        interrupts:
+          # Either a single combined interrupt or up to 6 individual interrupts
+          minItems: 1
+          maxItems: 6
+          description: >
+            A list of 6 interrupts; one per each of timer channels 1 through 5,
+            and one for the shared interrupt for the remaining channels.
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra20-timer
+    then:
+      properties:
+        interrupts:
+          # Either a single combined interrupt or up to 4 individual interrupts
+          minItems: 1
+          maxItems: 4
+          description: |
+            A list of 4 interrupts; one per timer channel.
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-timer
+        description: >
+          The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit
+          timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived
+          from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock
+          (TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic,
+          or watchdog interrupts.
+      - items:
+          - enum:
+              - nvidia,tegra114-timer
+              - nvidia,tegra124-timer
+              - nvidia,tegra132-timer
+          - const: nvidia,tegra30-timer
+      - items:
+          - const: nvidia,tegra30-timer
+          - const: nvidia,tegra20-timer
+        description: >
+          The Tegra30 timer provides ten 29-bit timer channels, a single 32-bit free
+          running counter, and 5 watchdog modules. The first two channels may also
+          trigger a legacy watchdog reset.
+      - const: nvidia,tegra20-timer
+        description: >
+          The Tegra20 timer provides four 29-bit timer channels and a single 32-bit free
+          running counter. The first two channels may also trigger a watchdog reset.
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: timer
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    timer@60005000 {
+        compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+        reg = <0x60005000 0x400>;
+        interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 41 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 121 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 122 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car 214>;
+    };
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@60005000 {
+        compatible = "nvidia,tegra210-timer";
+        reg = <0x60005000 0x400>;
+        interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_TIMER>;
+        clock-names = "timer";
+    };
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
new file mode 100644
index 000000000000..db8b5595540f
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra186 timer
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+
+description: >
+  The Tegra timer provides 29-bit timer counters and a 32-bit timestamp
+  counter. Each NV timer selects its timing reference signal from the 1 MHz
+  reference generated by USEC, TSC or either clk_m or OSC. Each TMR can be
+  programmed to generate one-shot, periodic, or watchdog interrupts.
+
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-timer
+        description: >
+          The Tegra186 timer provides ten 29-bit timer counters.
+      - const: nvidia,tegra234-timer
+        description: >
+          The Tegra234 timer provides sixteen 29-bit timer counters.
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-timer
+    then:
+      properties:
+        interrupts:
+          maxItems: 10
+          description: >
+            One per each timer channels 0 through 9.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra234-timer
+    then:
+      properties:
+        interrupts:
+          maxItems: 16
+          description: >
+            One per each timer channels 0 through 15.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@3010000 {
+        compatible = "nvidia,tegra186-timer";
+        reg = <0x03010000 0x000e0000>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@2080000 {
+        compatible = "nvidia,tegra234-timer";
+        reg = <0x02080000 0x00121000>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
deleted file mode 100644
index 4a864bd10d3d..000000000000
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-NVIDIA Tegra20 timer
-
-The Tegra20 timer provides four 29-bit timer channels and a single 32-bit free
-running counter. The first two channels may also trigger a watchdog reset.
-
-Required properties:
-
-- compatible : should be "nvidia,tegra20-timer".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 4 interrupts; one per timer channel.
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-
-Example:
-
-timer {
-	compatible = "nvidia,tegra20-timer";
-	reg = <0x60005000 0x60>;
-	interrupts = <0 0 0x04
-			0 1 0x04
-			0 41 0x04
-			0 42 0x04>;
-	clocks = <&tegra_car 132>;
-};
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
deleted file mode 100644
index 032cda96fe0d..000000000000
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-NVIDIA Tegra210 timer
-
-The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit
-timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived
-from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock
-(TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic,
-or watchdog interrupts.
-
-Required properties:
-- compatible : "nvidia,tegra210-timer".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 14 interrupts; one per each timer channels 0 through
-  13.
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-
-timer@60005000 {
-	compatible = "nvidia,tegra210-timer";
-	reg = <0x0 0x60005000 0x0 0x400>;
-	interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA210_CLK_TIMER>;
-	clock-names = "timer";
-};
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
deleted file mode 100644
index 1761f53ee36f..000000000000
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-NVIDIA Tegra30 timer
-
-The Tegra30 timer provides ten 29-bit timer channels, a single 32-bit free
-running counter, and 5 watchdog modules. The first two channels may also
-trigger a legacy watchdog reset.
-
-Required properties:
-
-- compatible : For Tegra30, must contain "nvidia,tegra30-timer".  Otherwise,
-  must contain '"nvidia,<chip>-timer", "nvidia,tegra30-timer"' where
-  <chip> is tegra124 or tegra132.
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 6 interrupts; one per each of timer channels 1
-    through 5, and one for the shared interrupt for the remaining channels.
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-
-timer {
-	compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
-	reg = <0x60005000 0x400>;
-	interrupts = <0 0 0x04
-		      0 1 0x04
-		      0 41 0x04
-		      0 42 0x04
-		      0 121 0x04
-		      0 122 0x04>;
-	clocks = <&tegra_car 214>;
-};
diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt
deleted file mode 100644
index d57659996d62..000000000000
--- a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-NXP System Counter Module(sys_ctr)
-
-The system counter(sys_ctr) is a programmable system counter which provides
-a shared time base to Cortex A15, A7, A53, A73, etc. it is intended for use in
-applications where the counter is always powered and support multiple,
-unrelated clocks. The compare frame inside can be used for timer purpose.
-
-Required properties:
-
-- compatible :      should be "nxp,sysctr-timer"
-- reg :             Specifies the base physical address and size of the comapre
-                    frame and the counter control, read & compare.
-- interrupts :      should be the first compare frames' interrupt
-- clocks : 	    Specifies the counter clock.
-- clock-names: 	    Specifies the clock's name of this module
-
-Example:
-
-	system_counter: timer@306a0000 {
-		compatible = "nxp,sysctr-timer";
-		reg = <0x306a0000 0x20000>;/* system-counter-rd & compare */
-		clocks = <&clk_8m>;
-		clock-names = "per";
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
new file mode 100644
index 000000000000..2b9653dafab8
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,sysctr-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP System Counter Module(sys_ctr)
+
+maintainers:
+  - Bai Ping <ping.bai@nxp.com>
+
+description: |
+  The system counter(sys_ctr) is a programmable system counter
+  which provides a shared time base to Cortex A15, A7, A53, A73,
+  etc. it is intended for use in applications where the counter
+  is always powered and support multiple, unrelated clocks. The
+  compare frame inside can be used for timer purpose.
+
+properties:
+  compatible:
+    const: nxp,sysctr-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: per
+
+  nxp,no-divider:
+    description: if present, means there is no internal base clk divider.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@306a0000 {
+        compatible = "nxp,sysctr-timer";
+        reg = <0x306a0000 0x20000>;
+        clocks = <&clk_8m>;
+        clock-names = "per";
+        interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+     };
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
deleted file mode 100644
index f82087b220f4..000000000000
--- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-NXP Low Power Timer/Pulse Width Modulation Module (TPM)
-
-The Timer/PWM Module (TPM) supports input capture, output compare,
-and the generation of PWM signals to control electric motor and power
-management applications. The counter, compare and capture registers
-are clocked by an asynchronous clock that can remain enabled in low
-power modes. TPM can support global counter bus where one TPM drives
-the counter bus for the others, provided bit width is the same.
-
-Required properties:
-
-- compatible :	should be "fsl,imx7ulp-tpm"
-- reg :		Specifies base physical address and size of the register sets
-		for the clock event device and clock source device.
-- interrupts :	Should be the clock event device interrupt.
-- clocks :	The clocks provided by the SoC to drive the timer, must contain
-		an entry for each entry in clock-names.
-- clock-names : Must include the following entries: "ipg" and "per".
-
-Example:
-tpm5: tpm@40260000 {
-	compatible = "fsl,imx7ulp-tpm";
-	reg = <0x40260000 0x1000>;
-	interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
-		 <&clks IMX7ULP_CLK_LPTPM5>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
new file mode 100644
index 000000000000..f69773a8e4b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,tpm-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Low Power Timer/Pulse Width Modulation Module (TPM)
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: |
+  The Timer/PWM Module (TPM) supports input capture, output compare,
+  and the generation of PWM signals to control electric motor and power
+  management applications. The counter, compare and capture registers
+  are clocked by an asynchronous clock that can remain enabled in low
+  power modes. TPM can support global counter bus where one TPM drives
+  the counter bus for the others, provided bit width is the same.
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx7ulp-tpm
+      - items:
+          - const: fsl,imx8ulp-tpm
+          - const: fsl,imx7ulp-tpm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC TPM ipg clock
+      - description: SoC TPM per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@40260000 {
+        compatible = "fsl,imx7ulp-tpm";
+        reg = <0x40260000 0x1000>;
+        interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+                 <&pcc2 IMX7ULP_CLK_LPTPM5>;
+        clock-names = "ipg", "per";
+    };
diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
deleted file mode 100644
index 4db542c9a0fd..000000000000
--- a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-RDA Micro RDA8810PL Timer
-
-Required properties:
-- compatible      :  "rda,8810pl-timer"
-- reg             :  Offset and length of the register set for the device.
-- interrupts      :  Should contain two interrupts.
-- interrupt-names :  Should be "hwtimer", "ostimer".
-
-Example:
-
-		apb@20900000 {
-			compatible = "simple-bus";
-			...
-			timer@10000 {
-				compatible = "rda,8810pl-timer";
-				reg = <0x10000 0x1000>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH>,
-					     <17 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "hwtimer", "ostimer";
-			};
diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
new file mode 100644
index 000000000000..f9043a4488d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/rda,8810pl-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro RDA8810PL Timer
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    const: rda,8810pl-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: hwtimer
+      - const: ostimer
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@20910000 {
+      compatible = "rda,8810pl-timer";
+      reg = <0x20910000 0x1000>;
+      interrupts = <16 IRQ_TYPE_LEVEL_HIGH>,
+                   <17 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "hwtimer", "ostimer";
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/renesas,16bit-timer.txt b/Documentation/devicetree/bindings/timer/renesas,16bit-timer.txt
deleted file mode 100644
index e8792447a199..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,16bit-timer.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Renesas H8/300 16bit timer
-
-The 16bit timer is a 16bit timer/counter with configurable clock inputs and
-programmable compare match.
-
-Required Properties:
-
-  - compatible: must contain "renesas,16bit-timer"
-  - reg: base address and length of the registers block for the timer module.
-  - interrupts: interrupt-specifier for the timer, IMIA
-  - clocks: a list of phandle, one for each entry in clock-names.
-  - clock-names: must contain "peripheral_clk" for the functional clock.
-  - renesas,channel: timer channel number.
-
-Example:
-
-	timer16: timer@ffff68 {
-		compatible = "reneas,16bit-timer";
-		reg = <0xffff68 8>, <0xffff60 8>;
-		interrupts = <24>;
-		renesas,channel = <0>;
-		clocks = <&pclk>;
-		clock-names = "peripheral_clk";
-	};
-
diff --git a/Documentation/devicetree/bindings/timer/renesas,8bit-timer.txt b/Documentation/devicetree/bindings/timer/renesas,8bit-timer.txt
deleted file mode 100644
index 9dca3759a0f0..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,8bit-timer.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Renesas H8/300 8bit timer
-
-The 8bit timer is a 8bit timer/counter with configurable clock inputs and
-programmable compare match.
-
-This implement only supported cascade mode.
-
-Required Properties:
-
-  - compatible: must contain "renesas,8bit-timer"
-  - reg: base address and length of the registers block for the timer module.
-  - interrupts: interrupt-specifier for the timer, CMIA and TOVI
-  - clocks: a list of phandle, one for each entry in clock-names.
-  - clock-names: must contain "fck" for the functional clock.
-
-Example:
-
-	timer8_0: timer@ffff80 {
-		compatible = "renesas,8bit-timer";
-		reg = <0xffff80 10>;
-		interrupts = <36>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
deleted file mode 100644
index a747fabab7d3..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-* Renesas R-Car Compare Match Timer (CMT)
-
-The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
-inputs and programmable compare match.
-
-Channels share hardware resources but their counter and compare match value
-are independent. A particular CMT instance can implement only a subset of the
-channels supported by the CMT model. Channel indices represent the hardware
-position of the channel in the CMT and don't match the channel numbers in the
-datasheets.
-
-Required Properties:
-
-  - compatible: must contain one or more of the following:
-    - "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4.
-    - "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4.
-    - "renesas,r8a7740-cmt0" for the 32-bit CMT0 device included in r8a7740.
-    - "renesas,r8a7740-cmt1" for the 48-bit CMT1 device included in r8a7740.
-    - "renesas,r8a7740-cmt2" for the 32-bit CMT2 device included in r8a7740.
-    - "renesas,r8a7740-cmt3" for the 32-bit CMT3 device included in r8a7740.
-    - "renesas,r8a7740-cmt4" for the 32-bit CMT4 device included in r8a7740.
-    - "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743.
-    - "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743.
-    - "renesas,r8a7744-cmt0" for the 32-bit CMT0 device included in r8a7744.
-    - "renesas,r8a7744-cmt1" for the 48-bit CMT1 device included in r8a7744.
-    - "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745.
-    - "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745.
-    - "renesas,r8a77470-cmt0" for the 32-bit CMT0 device included in r8a77470.
-    - "renesas,r8a77470-cmt1" for the 48-bit CMT1 device included in r8a77470.
-    - "renesas,r8a774a1-cmt0" for the 32-bit CMT0 device included in r8a774a1.
-    - "renesas,r8a774a1-cmt1" for the 48-bit CMT devices included in r8a774a1.
-    - "renesas,r8a774b1-cmt0" for the 32-bit CMT0 device included in r8a774b1.
-    - "renesas,r8a774b1-cmt1" for the 48-bit CMT devices included in r8a774b1.
-    - "renesas,r8a774c0-cmt0" for the 32-bit CMT0 device included in r8a774c0.
-    - "renesas,r8a774c0-cmt1" for the 48-bit CMT devices included in r8a774c0.
-    - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
-    - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790.
-    - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791.
-    - "renesas,r8a7791-cmt1" for the 48-bit CMT1 device included in r8a7791.
-    - "renesas,r8a7792-cmt0" for the 32-bit CMT0 device included in r8a7792.
-    - "renesas,r8a7792-cmt1" for the 48-bit CMT1 device included in r8a7792.
-    - "renesas,r8a7793-cmt0" for the 32-bit CMT0 device included in r8a7793.
-    - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793.
-    - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794.
-    - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794.
-    - "renesas,r8a7795-cmt0" for the 32-bit CMT0 device included in r8a7795.
-    - "renesas,r8a7795-cmt1" for the 48-bit CMT devices included in r8a7795.
-    - "renesas,r8a7796-cmt0" for the 32-bit CMT0 device included in r8a7796.
-    - "renesas,r8a7796-cmt1" for the 48-bit CMT devices included in r8a7796.
-    - "renesas,r8a77965-cmt0" for the 32-bit CMT0 device included in r8a77965.
-    - "renesas,r8a77965-cmt1" for the 48-bit CMT devices included in r8a77965.
-    - "renesas,r8a77970-cmt0" for the 32-bit CMT0 device included in r8a77970.
-    - "renesas,r8a77970-cmt1" for the 48-bit CMT devices included in r8a77970.
-    - "renesas,r8a77980-cmt0" for the 32-bit CMT0 device included in r8a77980.
-    - "renesas,r8a77980-cmt1" for the 48-bit CMT devices included in r8a77980.
-    - "renesas,r8a77990-cmt0" for the 32-bit CMT0 device included in r8a77990.
-    - "renesas,r8a77990-cmt1" for the 48-bit CMT devices included in r8a77990.
-    - "renesas,r8a77995-cmt0" for the 32-bit CMT0 device included in r8a77995.
-    - "renesas,r8a77995-cmt1" for the 48-bit CMT devices included in r8a77995.
-    - "renesas,sh73a0-cmt0" for the 32-bit CMT0 device included in sh73a0.
-    - "renesas,sh73a0-cmt1" for the 48-bit CMT1 device included in sh73a0.
-    - "renesas,sh73a0-cmt2" for the 32-bit CMT2 device included in sh73a0.
-    - "renesas,sh73a0-cmt3" for the 32-bit CMT3 device included in sh73a0.
-    - "renesas,sh73a0-cmt4" for the 32-bit CMT4 device included in sh73a0.
-
-    - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2
-		and RZ/G1.
-    - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2
-		and RZ/G1.
-		These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries
-		listed above.
-    - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3
-		and RZ/G2.
-    - "renesas,rcar-gen3-cmt1" for 48-bit CMT devices included in R-Car Gen3
-		and RZ/G2.
-		These are fallbacks for R-Car Gen3 and RZ/G2 entries listed
-		above.
-
-  - reg: base address and length of the registers block for the timer module.
-  - interrupts: interrupt-specifier for the timer, one per channel.
-  - clocks: a list of phandle + clock-specifier pairs, one for each entry
-    in clock-names.
-  - clock-names: must contain "fck" for the functional clock.
-
-
-Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes
-
-	cmt0: timer@ffca0000 {
-		compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0";
-		reg = <0 0xffca0000 0 0x1004>;
-		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 142 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
-		clock-names = "fck";
-	};
-
-	cmt1: timer@e6130000 {
-		compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1";
-		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
-		clock-names = "fck";
-	};
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
new file mode 100644
index 000000000000..bde6c9b66bf4
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,cmt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Compare Match Timer (CMT)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
+  inputs and programmable compare match.
+
+  Channels share hardware resources but their counter and compare match values
+  are independent. A particular CMT instance can implement only a subset of the
+  channels supported by the CMT model. Channel indices represent the hardware
+  position of the channel in the CMT and don't match the channel numbers in the
+  datasheets.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a7740-cmt0      # 32-bit CMT0 on R-Mobile A1
+              - renesas,r8a7740-cmt1      # 48-bit CMT1 on R-Mobile A1
+              - renesas,r8a7740-cmt2      # 32-bit CMT2 on R-Mobile A1
+              - renesas,r8a7740-cmt3      # 32-bit CMT3 on R-Mobile A1
+              - renesas,r8a7740-cmt4      # 32-bit CMT4 on R-Mobile A1
+              - renesas,sh73a0-cmt0       # 32-bit CMT0 on SH-Mobile AG5
+              - renesas,sh73a0-cmt1       # 48-bit CMT1 on SH-Mobile AG5
+              - renesas,sh73a0-cmt2       # 32-bit CMT2 on SH-Mobile AG5
+              - renesas,sh73a0-cmt3       # 32-bit CMT3 on SH-Mobile AG5
+              - renesas,sh73a0-cmt4       # 32-bit CMT4 on SH-Mobile AG5
+
+      - items:
+          - enum:
+              - renesas,r8a73a4-cmt0      # 32-bit CMT0 on R-Mobile APE6
+              - renesas,r8a7742-cmt0      # 32-bit CMT0 on RZ/G1H
+              - renesas,r8a7743-cmt0      # 32-bit CMT0 on RZ/G1M
+              - renesas,r8a7744-cmt0      # 32-bit CMT0 on RZ/G1N
+              - renesas,r8a7745-cmt0      # 32-bit CMT0 on RZ/G1E
+              - renesas,r8a77470-cmt0     # 32-bit CMT0 on RZ/G1C
+              - renesas,r8a7790-cmt0      # 32-bit CMT0 on R-Car H2
+              - renesas,r8a7791-cmt0      # 32-bit CMT0 on R-Car M2-W
+              - renesas,r8a7792-cmt0      # 32-bit CMT0 on R-Car V2H
+              - renesas,r8a7793-cmt0      # 32-bit CMT0 on R-Car M2-N
+              - renesas,r8a7794-cmt0      # 32-bit CMT0 on R-Car E2
+          - const: renesas,rcar-gen2-cmt0 # 32-bit CMT0 on R-Mobile APE6, R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,r8a73a4-cmt1      # 48-bit CMT1 on R-Mobile APE6
+              - renesas,r8a7742-cmt1      # 48-bit CMT1 on RZ/G1H
+              - renesas,r8a7743-cmt1      # 48-bit CMT1 on RZ/G1M
+              - renesas,r8a7744-cmt1      # 48-bit CMT1 on RZ/G1N
+              - renesas,r8a7745-cmt1      # 48-bit CMT1 on RZ/G1E
+              - renesas,r8a77470-cmt1     # 48-bit CMT1 on RZ/G1C
+              - renesas,r8a7790-cmt1      # 48-bit CMT1 on R-Car H2
+              - renesas,r8a7791-cmt1      # 48-bit CMT1 on R-Car M2-W
+              - renesas,r8a7792-cmt1      # 48-bit CMT1 on R-Car V2H
+              - renesas,r8a7793-cmt1      # 48-bit CMT1 on R-Car M2-N
+              - renesas,r8a7794-cmt1      # 48-bit CMT1 on R-Car E2
+          - const: renesas,rcar-gen2-cmt1 # 48-bit CMT1 on R-Mobile APE6, R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,r8a774a1-cmt0     # 32-bit CMT0 on RZ/G2M
+              - renesas,r8a774b1-cmt0     # 32-bit CMT0 on RZ/G2N
+              - renesas,r8a774c0-cmt0     # 32-bit CMT0 on RZ/G2E
+              - renesas,r8a774e1-cmt0     # 32-bit CMT0 on RZ/G2H
+              - renesas,r8a7795-cmt0      # 32-bit CMT0 on R-Car H3
+              - renesas,r8a7796-cmt0      # 32-bit CMT0 on R-Car M3-W
+              - renesas,r8a77961-cmt0     # 32-bit CMT0 on R-Car M3-W+
+              - renesas,r8a77965-cmt0     # 32-bit CMT0 on R-Car M3-N
+              - renesas,r8a77970-cmt0     # 32-bit CMT0 on R-Car V3M
+              - renesas,r8a77980-cmt0     # 32-bit CMT0 on R-Car V3H
+              - renesas,r8a77990-cmt0     # 32-bit CMT0 on R-Car E3
+              - renesas,r8a77995-cmt0     # 32-bit CMT0 on R-Car D3
+          - const: renesas,rcar-gen3-cmt0 # 32-bit CMT0 on R-Car Gen3 and RZ/G2
+
+      - items:
+          - enum:
+              - renesas,r8a774a1-cmt1     # 48-bit CMT on RZ/G2M
+              - renesas,r8a774b1-cmt1     # 48-bit CMT on RZ/G2N
+              - renesas,r8a774c0-cmt1     # 48-bit CMT on RZ/G2E
+              - renesas,r8a774e1-cmt1     # 48-bit CMT on RZ/G2H
+              - renesas,r8a7795-cmt1      # 48-bit CMT on R-Car H3
+              - renesas,r8a7796-cmt1      # 48-bit CMT on R-Car M3-W
+              - renesas,r8a77961-cmt1     # 48-bit CMT on R-Car M3-W+
+              - renesas,r8a77965-cmt1     # 48-bit CMT on R-Car M3-N
+              - renesas,r8a77970-cmt1     # 48-bit CMT on R-Car V3M
+              - renesas,r8a77980-cmt1     # 48-bit CMT on R-Car V3H
+              - renesas,r8a77990-cmt1     # 48-bit CMT on R-Car E3
+              - renesas,r8a77995-cmt1     # 48-bit CMT on R-Car D3
+          - const: renesas,rcar-gen3-cmt1 # 48-bit CMT on R-Car Gen3 and RZ/G2
+
+      - items:
+          - enum:
+              - renesas,r8a779a0-cmt0     # 32-bit CMT0 on R-Car V3U
+              - renesas,r8a779f0-cmt0     # 32-bit CMT0 on R-Car S4-8
+          - const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4
+
+      - items:
+          - enum:
+              - renesas,r8a779a0-cmt1     # 48-bit CMT on R-Car V3U
+              - renesas,r8a779f0-cmt1     # 48-bit CMT on R-Car S4-8
+          - const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-cmt0
+              - renesas,rcar-gen3-cmt0
+              - renesas,rcar-gen4-cmt0
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-cmt1
+              - renesas,rcar-gen3-cmt1
+              - renesas,rcar-gen4-cmt1
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+          maxItems: 8
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+    cmt0: timer@ffca0000 {
+            compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0";
+            reg = <0xffca0000 0x1004>;
+            interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 124>;
+            clock-names = "fck";
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 124>;
+    };
+
+    cmt1: timer@e6130000 {
+            compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1";
+            reg = <0xe6130000 0x1004>;
+            interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 329>;
+            clock-names = "fck";
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 329>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,em-sti.yaml b/Documentation/devicetree/bindings/timer/renesas,em-sti.yaml
new file mode 100644
index 000000000000..233d74d5402c
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,em-sti.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,em-sti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas EMMA Mobile System Timer
+
+maintainers:
+  - Magnus Damm <magnus.damm@gmail.com>
+
+properties:
+  compatible:
+    const: renesas,em-sti
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: sclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    timer@e0180000 {
+            compatible = "renesas,em-sti";
+            reg = <0xe0180000 0x54>;
+            interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&sti_sclk>;
+            clock-names = "sclk";
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
deleted file mode 100644
index ba0a34d97eb8..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* Renesas Multi-Function Timer Pulse Unit 2 (MTU2)
-
-The MTU2 is a multi-purpose, multi-channel timer/counter with configurable
-clock inputs and programmable compare match.
-
-Channels share hardware resources but their counter and compare match value
-are independent. The MTU2 hardware supports five channels indexed from 0 to 4.
-
-Required Properties:
-
-  - compatible: must be one or more of the following:
-    - "renesas,mtu2-r7s72100" for the r7s72100 MTU2
-    - "renesas,mtu2" for any MTU2
-      This is a fallback for the above renesas,mtu2-* entries
-
-  - reg: base address and length of the registers block for the timer module.
-
-  - interrupts: interrupt specifiers for the timer, one for each entry in
-    interrupt-names.
-  - interrupt-names: must contain one entry named "tgi?a" for each enabled
-    channel, where "?" is the channel index expressed as one digit from "0" to
-    "4".
-
-  - clocks: a list of phandle + clock-specifier pairs, one for each entry
-    in clock-names.
-  - clock-names: must contain "fck" for the functional clock.
-
-
-Example: R7S72100 (RZ/A1H) MTU2 node
-
-	mtu2: timer@fcff0000 {
-		compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
-		reg = <0xfcff0000 0x400>;
-		interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 146 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 150 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 154 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 159 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "tgi0a", "tgi1a", "tgi2a", "tgi3a", "tgi4a";
-		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
-		clock-names = "fck";
-	};
diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml b/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml
new file mode 100644
index 000000000000..15d8dddf4ae9
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,mtu2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Multi-Function Timer Pulse Unit 2 (MTU2)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  The MTU2 is a multi-purpose, multi-channel timer/counter with configurable clock inputs
+  and programmable compare match.
+
+  Channels share hardware resources but their counter and compare match value are
+  independent. The MTU2 hardware supports five channels indexed from 0 to 4.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,mtu2-r7s72100 # RZ/A1H
+      - const: renesas,mtu2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 5
+    description: One entry for each enabled channel.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: tgi0a
+      - const: tgi1a
+      - const: tgi2a
+      - const: tgi3a
+      - const: tgi4a
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r7s72100-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mtu2: timer@fcff0000 {
+            compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+            reg = <0xfcff0000 0x400>;
+            interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "tgi0a";
+            clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+            clock-names = "fck";
+            power-domains = <&cpg_clocks>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.txt b/Documentation/devicetree/bindings/timer/renesas,ostm.txt
deleted file mode 100644
index 81a78f8bcf17..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,ostm.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Renesas OS Timer (OSTM)
-
-The OSTM is a multi-channel 32-bit timer/counter with fixed clock
-source that can operate in either interval count down timer or free-running
-compare match mode.
-
-Channels are independent from each other.
-
-Required Properties:
-
-  - compatible: must be one or more of the following:
-    - "renesas,r7s72100-ostm" for the R7S72100 (RZ/A1) OSTM
-    - "renesas,r7s9210-ostm" for the R7S9210 (RZ/A2) OSTM
-    - "renesas,ostm" for any OSTM
-		This is a fallback for the above renesas,*-ostm entries
-
-  - reg: base address and length of the register block for a timer channel.
-
-  - interrupts: interrupt specifier for the timer channel.
-
-  - clocks: clock specifier for the timer channel.
-
-Example: R7S72100 (RZ/A1H) OSTM node
-
-	ostm0: timer@fcfec000 {
-		compatible = "renesas,r7s72100-ostm", "renesas,ostm";
-		reg = <0xfcfec000 0x30>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
-		power-domains = <&cpg_clocks>;
-	};
diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
new file mode 100644
index 000000000000..7207929e5cd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,ostm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas OS Timer (OSTM)
+
+maintainers:
+  - Chris Brandt <chris.brandt@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The OSTM is a multi-channel 32-bit timer/counter with fixed clock source that
+  can operate in either interval count down timer or free-running compare match
+  mode.
+
+  Channels are independent from each other.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r7s72100-ostm  # RZ/A1H
+          - renesas,r7s9210-ostm   # RZ/A2M
+          - renesas,r9a07g043-ostm # RZ/G2UL
+          - renesas,r9a07g044-ostm # RZ/G2{L,LC}
+          - renesas,r9a07g054-ostm # RZ/V2L
+      - const: renesas,ostm        # Generic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a07g043-ostm
+          - renesas,r9a07g044-ostm
+          - renesas,r9a07g054-ostm
+then:
+  required:
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r7s72100-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    ostm0: timer@fcfec000 {
+            compatible = "renesas,r7s72100-ostm", "renesas,ostm";
+            reg = <0xfcfec000 0x30>;
+            interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
+            power-domains = <&cpg_clocks>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
deleted file mode 100644
index 29159f4e65ab..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Renesas R-Mobile/R-Car Timer Unit (TMU)
-
-The TMU is a 32-bit timer/counter with configurable clock inputs and
-programmable compare match.
-
-Channels share hardware resources but their counter and compare match value
-are independent. The TMU hardware supports up to three channels.
-
-Required Properties:
-
-  - compatible: must contain one or more of the following:
-    - "renesas,tmu-r8a7740" for the r8a7740 TMU
-    - "renesas,tmu-r8a774a1" for the r8a774A1 TMU
-    - "renesas,tmu-r8a774b1" for the r8a774B1 TMU
-    - "renesas,tmu-r8a774c0" for the r8a774C0 TMU
-    - "renesas,tmu-r8a7778" for the r8a7778 TMU
-    - "renesas,tmu-r8a7779" for the r8a7779 TMU
-    - "renesas,tmu-r8a77970" for the r8a77970 TMU
-    - "renesas,tmu-r8a77980" for the r8a77980 TMU
-    - "renesas,tmu" for any TMU.
-      This is a fallback for the above renesas,tmu-* entries
-
-  - reg: base address and length of the registers block for the timer module.
-
-  - interrupts: interrupt-specifier for the timer, one per channel.
-
-  - clocks: a list of phandle + clock-specifier pairs, one for each entry
-    in clock-names.
-  - clock-names: must contain "fck" for the functional clock.
-
-Optional Properties:
-
-  - #renesas,channels: number of channels implemented by the timer, must be 2
-    or 3 (if not specified the value defaults to 3).
-
-
-Example: R8A7779 (R-Car H1) TMU0 node
-
-	tmu0: timer@ffd80000 {
-		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
-		reg = <0xffd80000 0x30>;
-		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
-		clock-names = "fck";
-
-		#renesas,channels = <3>;
-	};
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
new file mode 100644
index 000000000000..60f4c059bcff
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,tmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Mobile/R-Car Timer Unit (TMU)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  The TMU is a 32-bit timer/counter with configurable clock inputs and
+  programmable compare match.
+
+  Channels share hardware resources but their counter and compare match value
+  are independent. The TMU hardware supports up to three channels.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,tmu-r8a7740  # R-Mobile A1
+          - renesas,tmu-r8a774a1 # RZ/G2M
+          - renesas,tmu-r8a774b1 # RZ/G2N
+          - renesas,tmu-r8a774c0 # RZ/G2E
+          - renesas,tmu-r8a774e1 # RZ/G2H
+          - renesas,tmu-r8a7778  # R-Car M1A
+          - renesas,tmu-r8a7779  # R-Car H1
+          - renesas,tmu-r8a7795  # R-Car H3
+          - renesas,tmu-r8a7796  # R-Car M3-W
+          - renesas,tmu-r8a77961 # R-Car M3-W+
+          - renesas,tmu-r8a77965 # R-Car M3-N
+          - renesas,tmu-r8a77970 # R-Car V3M
+          - renesas,tmu-r8a77980 # R-Car V3H
+          - renesas,tmu-r8a77990 # R-Car E3
+          - renesas,tmu-r8a77995 # R-Car D3
+          - renesas,tmu-r8a779a0 # R-Car V3U
+          - renesas,tmu-r8a779f0 # R-Car S4-8
+      - const: renesas,tmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#renesas,channels':
+    description:
+      Number of channels implemented by the timer.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 2, 3 ]
+    default: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - renesas,tmu-r8a7740
+            - renesas,tmu-r8a7778
+            - renesas,tmu-r8a7779
+then:
+  required:
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7779-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7779-sysc.h>
+    tmu0: timer@ffd80000 {
+            compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+            reg = <0xffd80000 0x30>;
+            interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+            clock-names = "fck";
+            power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+            #renesas,channels = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,tpu.txt b/Documentation/devicetree/bindings/timer/renesas,tpu.txt
deleted file mode 100644
index 1d46f9de4feb..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,tpu.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Renesas H8/300 Timer Pulse Unit
-
-The TPU is a 16bit timer/counter with configurable clock inputs and
-programmable compare match.
-This implementation support only cascade mode.
-
-Required Properties:
-
-  - compatible: must contain "renesas,tpu"
-  - reg: base address and length of the registers block in 2 channel.
-  - clocks: a list of phandle, one for each entry in clock-names.
-  - clock-names: must contain "peripheral_clk" for the functional clock.
-
-
-Example:
-	tpu: tpu@ffffe0 {
-		compatible = "renesas,tpu";
-		reg = <0xffffe0 16>, <0xfffff0 12>;
-		clocks = <&pclk>;
-		clock-names = "peripheral_clk";
-	};
diff --git a/Documentation/devicetree/bindings/timer/renesas,tpu.yaml b/Documentation/devicetree/bindings/timer/renesas,tpu.yaml
new file mode 100644
index 000000000000..01554dff23d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,tpu.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,tpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas H8/300 Timer Pulse Unit
+
+maintainers:
+  - Yoshinori Sato <ysato@users.sourceforge.jp>
+
+description:
+  The TPU is a 16bit timer/counter with configurable clock inputs and
+  programmable compare match.
+  This implementation supports only cascade mode.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: renesas,tpu
+    '#pwm-cells': false
+  required:
+    - compatible
+
+properties:
+  compatible:
+    const: renesas,tpu
+
+  reg:
+    items:
+      - description: First channel
+      - description: Second channel
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    tpu: tpu@ffffe0 {
+            compatible = "renesas,tpu";
+            reg = <0xffffe0 16>, <0xfffff0 12>;
+            clocks = <&pclk>;
+            clock-names = "fck";
+    };
diff --git a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt
deleted file mode 100644
index d65fdce7c7f0..000000000000
--- a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Rockchip rk timer
-
-Required properties:
-- compatible: should be:
-  "rockchip,rv1108-timer", "rockchip,rk3288-timer": for Rockchip RV1108
-  "rockchip,rk3036-timer", "rockchip,rk3288-timer": for Rockchip RK3036
-  "rockchip,rk3066-timer", "rockchip,rk3288-timer": for Rockchip RK3066
-  "rockchip,rk3188-timer", "rockchip,rk3288-timer": for Rockchip RK3188
-  "rockchip,rk3228-timer", "rockchip,rk3288-timer": for Rockchip RK3228
-  "rockchip,rk3229-timer", "rockchip,rk3288-timer": for Rockchip RK3229
-  "rockchip,rk3288-timer": for Rockchip RK3288
-  "rockchip,rk3368-timer", "rockchip,rk3288-timer": for Rockchip RK3368
-  "rockchip,rk3399-timer": for Rockchip RK3399
-- reg: base address of the timer register starting with TIMERS CONTROL register
-- interrupts: should contain the interrupts for Timer0
-- clocks : must contain an entry for each entry in clock-names
-- clock-names : must include the following entries:
-  "timer", "pclk"
-
-Example:
-	timer: timer@ff810000 {
-		compatible = "rockchip,rk3288-timer";
-		reg = <0xff810000 0x20>;
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&xin24m>, <&cru PCLK_TIMER>;
-		clock-names = "timer", "pclk";
-	};
diff --git a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
new file mode 100644
index 000000000000..dc3bc1e62fe9
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/rockchip,rk-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Timer
+
+maintainers:
+  - Daniel Lezcano <daniel.lezcano@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3288-timer
+      - const: rockchip,rk3399-timer
+      - items:
+          - enum:
+              - rockchip,rv1108-timer
+              - rockchip,rk3036-timer
+              - rockchip,rk3188-timer
+              - rockchip,rk3228-timer
+              - rockchip,rk3229-timer
+              - rockchip,rk3288-timer
+              - rockchip,rk3368-timer
+              - rockchip,px30-timer
+          - const: rockchip,rk3288-timer
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: timer
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3288-cru.h>
+
+    timer: timer@ff810000 {
+        compatible = "rockchip,rk3288-timer";
+        reg = <0xff810000 0x20>;
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru PCLK_TIMER>, <&xin24m>;
+        clock-names = "pclk", "timer";
+    };
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
index 273e359854dd..829bd2227f7c 100644
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
@@ -19,13 +19,46 @@ description: |+
 
 properties:
   compatible:
-    enum:
-      - samsung,exynos4210-mct
-      - samsung,exynos4412-mct
+    oneOf:
+      - enum:
+          - samsung,exynos4210-mct
+          - samsung,exynos4412-mct
+      - items:
+          - enum:
+              - axis,artpec8-mct
+              - samsung,exynos3250-mct
+              - samsung,exynos5250-mct
+              - samsung,exynos5260-mct
+              - samsung,exynos5420-mct
+              - samsung,exynos5433-mct
+              - samsung,exynos850-mct
+              - tesla,fsd-mct
+          - const: samsung,exynos4210-mct
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: fin_pll
+      - const: mct
 
   reg:
     maxItems: 1
 
+  samsung,frc-shared:
+    type: boolean
+    description: |
+      Indicates that the hardware requires that this processor share the
+      free-running counter with a different (main) processor.
+
+  samsung,local-timers:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 16
+    description: |
+      List of indices of local timers usable from this processor.
+
   interrupts:
     description: |
       Interrupts should be put in specific order. This is, the local timer
@@ -49,19 +82,89 @@ properties:
 
 required:
   - compatible
+  - clock-names
+  - clocks
   - interrupts
   - reg
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - axis,artpec8-mct
+    then:
+      properties:
+        samsung,local-timers: false
+        samsung,frc-shared: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos3250-mct
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+          maxItems: 8
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5250-mct
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - axis,artpec8-mct
+              - samsung,exynos5260-mct
+              - samsung,exynos5420-mct
+              - samsung,exynos5433-mct
+              - samsung,exynos850-mct
+    then:
+      properties:
+        interrupts:
+          minItems: 12
+          maxItems: 12
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - tesla,fsd-mct
+    then:
+      properties:
+        interrupts:
+          minItems: 16
+          maxItems: 16
+
+additionalProperties: false
+
 examples:
   - |
     // In this example, the IP contains two local timers, using separate
     // interrupts, so two local timer interrupts have been specified,
     // in addition to four global timer interrupts.
+    #include <dt-bindings/clock/exynos4.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     timer@10050000 {
         compatible = "samsung,exynos4210-mct";
         reg = <0x10050000 0x800>;
+        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+        clock-names = "fin_pll", "mct";
+
         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
@@ -73,11 +176,15 @@ examples:
   - |
     // In this example, the timer interrupts are connected to two separate
     // interrupt controllers. Hence, an interrupts-extended is needed.
+    #include <dt-bindings/clock/exynos4.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     timer@101c0000 {
         compatible = "samsung,exynos4210-mct";
         reg = <0x101C0000 0x800>;
+        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+        clock-names = "fin_pll", "mct";
+
         interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
                               <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
                               <&combiner 12 6>,
@@ -90,11 +197,14 @@ examples:
     // In this example, the IP contains four local timers, but using
     // a per-processor interrupt to handle them. Only one first local
     // interrupt is specified.
+    #include <dt-bindings/clock/exynos4.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     timer@10050000 {
         compatible = "samsung,exynos4412-mct";
         reg = <0x10050000 0x800>;
+        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+        clock-names = "fin_pll", "mct";
 
         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
@@ -107,11 +217,14 @@ examples:
     // In this example, the IP contains four local timers, but using
     // a per-processor interrupt to handle them. All the local timer
     // interrupts are specified.
+    #include <dt-bindings/clock/exynos4.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     timer@10050000 {
         compatible = "samsung,exynos4412-mct";
         reg = <0x10050000 0x800>;
+        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+        clock-names = "fin_pll", "mct";
 
         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
new file mode 100644
index 000000000000..bbad24165837
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/sifive,clint.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Core Local Interruptor
+
+maintainers:
+  - Palmer Dabbelt <palmer@dabbelt.com>
+  - Anup Patel <anup.patel@wdc.com>
+
+description:
+  SiFive (and other RISC-V) SOCs include an implementation of the SiFive
+  Core Local Interruptor (CLINT) for M-mode timer and M-mode inter-processor
+  interrupts. It directly connects to the timer and inter-processor interrupt
+  lines of various HARTs (or CPUs) so RISC-V per-HART (or per-CPU) local
+  interrupt controller is the parent interrupt controller for CLINT device.
+  The clock frequency of CLINT is specified via "timebase-frequency" DT
+  property of "/cpus" DT node. The "timebase-frequency" DT property is
+  described in Documentation/devicetree/bindings/riscv/cpus.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sifive,fu540-c000-clint
+              - starfive,jh7100-clint
+              - canaan,k210-clint
+          - const: sifive,clint0
+      - items:
+          - const: sifive,clint0
+          - const: riscv,clint0
+        deprecated: true
+        description: For the QEMU virt machine only
+
+    description:
+      Should be "<vendor>,<chip>-clint" and "sifive,clint<version>".
+      Supported compatible strings are -
+      "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated
+      onto the SiFive FU540 chip, "canaan,k210-clint" for the SiFive
+      CLINT v0 as integrated onto the Canaan Kendryte K210 chip, and
+      "sifive,clint0" for the SiFive CLINT v0 IP block with no chip
+      integration tweaks.
+      Please refer to sifive-blocks-ip-versioning.txt for details
+
+  reg:
+    maxItems: 1
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 4095
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts-extended
+
+examples:
+  - |
+    timer@2000000 {
+      compatible = "sifive,fu540-c000-clint", "sifive,clint0";
+      interrupts-extended = <&cpu1intc 3>, <&cpu1intc 7>,
+                            <&cpu2intc 3>, <&cpu2intc 7>,
+                            <&cpu3intc 3>, <&cpu3intc 7>,
+                            <&cpu4intc 3>, <&cpu4intc 7>;
+       reg = <0x2000000 0x10000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
new file mode 100644
index 000000000000..d33c9205a909
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/snps,dw-apb-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare APB Timer
+
+maintainers:
+  - Daniel Lezcano <daniel.lezcano@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: snps,dw-apb-timer
+      - enum:
+          - snps,dw-apb-timer-sp
+          - snps,dw-apb-timer-osc
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Timer ticks reference clock source
+      - description: APB interface clock source
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: timer
+      - const: pclk
+
+  clock-frequency: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+oneOf:
+  - required:
+      - clocks
+      - clock-names
+  - required:
+      - clock-frequency
+  - required:
+      - clock-freq
+
+examples:
+  - |
+    timer@ffe00000 {
+      compatible = "snps,dw-apb-timer";
+      interrupts = <0 170 4>;
+      reg = <0xffe00000 0x1000>;
+      clocks = <&timer_clk>, <&timer_pclk>;
+      clock-names = "timer", "pclk";
+    };
+  - |
+    timer@ffe00000 {
+      compatible = "snps,dw-apb-timer";
+      interrupts = <0 170 4>;
+      reg = <0xffe00000 0x1000>;
+      clocks = <&timer_clk>;
+      clock-names = "timer";
+    };
+  - |
+    timer@ffe00000 {
+      compatible = "snps,dw-apb-timer";
+      interrupts = <0 170 4>;
+      reg = <0xffe00000 0x1000>;
+      clock-frequency = <25000000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml b/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml
new file mode 100644
index 000000000000..901848d298ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/timer/st,nomadik-mtu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ST Microelectronics Nomadik Multi-Timer Unit MTU Timer
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: This timer is found in the ST Microelectronics Nomadik
+  SoCs STn8800, STn8810 and STn8815 as well as in ST-Ericsson DB8500.
+
+properties:
+  compatible:
+    items:
+      - const: st,nomadik-mtu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: The first clock named TIMCLK clocks the actual timers and
+      the second clock clocks the digital interface to the interconnect.
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: timclk
+      - const: apb_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mfd/dbx500-prcmu.h>
+    timer@a03c6000 {
+      compatible = "st,nomadik-mtu";
+      reg = <0xa03c6000 0x1000>;
+      interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
+      clock-names = "timclk", "apb_pclk";
+    };
diff --git a/Documentation/devicetree/bindings/timer/st,stm32-timer.yaml b/Documentation/devicetree/bindings/timer/st,stm32-timer.yaml
index 176aa3c9baf8..937aa8a56366 100644
--- a/Documentation/devicetree/bindings/timer/st,stm32-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/st,stm32-timer.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 general-purpose 16 and 32 bits timers bindings
 
 maintainers:
-  - Benjamin Gaignard <benjamin.gaignard@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+  - Patrice Chotard <patrice.chotard@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt b/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt
deleted file mode 100644
index 9499bc8ee9e3..000000000000
--- a/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-ST-Ericsson U300 apptimer
-
-Required properties:
-
-- compatible : should be "stericsson,u300-apptimer"
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 4 interrupts; one for each subtimer. These
-  are, in order: OS (operating system), DD (device driver) both
-  adopted for EPOC/Symbian with two specific IRQs for these tasks,
-  then GP1 and GP2, which are general-purpose timers.
-
-Example:
-
-timer {
-	compatible = "stericsson,u300-apptimer";
-	reg = <0xc0014000 0x1000>;
-	interrupts = <24 25 26 27>;
-};
diff --git a/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt b/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt
deleted file mode 100644
index d96c1e283e73..000000000000
--- a/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Timer64
--------
-
-The timer64 node describes C6X event timers.
-
-Required properties:
-
-- compatible: must be "ti,c64x+timer64"
-- reg: base address and size of register region
-- interrupts: interrupt id
-
-Optional properties:
-
-- ti,dscr-dev-enable: Device ID used to enable timer IP through DSCR interface.
-
-- ti,core-mask: on multi-core SoCs, bitmask of cores allowed to use this timer.
-
-Example:
-	timer0: timer@25e0000 {
-		compatible = "ti,c64x+timer64";
-		ti,core-mask = < 0x01 >;
-		reg = <0x25e0000 0x40>;
-		interrupt-parent = <&megamod_pic>;
-		interrupts = < 16 >;
-	};
diff --git a/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt b/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
index 5fbe361252b4..d3905a5412b8 100644
--- a/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
+++ b/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
@@ -10,7 +10,7 @@ It is global timer is a free running up-counter and can generate interrupt
 when the counter reaches preset counter values.
 
 Documentation:
-http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml b/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml
new file mode 100644
index 000000000000..acbb6f8997ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ti,timer-dm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI dual-mode timer
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: |
+  The TI dual-mode timer is a general purpose timer with PWM capabilities.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,am335x-timer
+              - ti,am335x-timer-1ms
+              - ti,am654-timer
+              - ti,dm814-timer
+              - ti,dm816-timer
+              - ti,omap2420-timer
+              - ti,omap3430-timer
+              - ti,omap4430-timer
+              - ti,omap5430-timer
+      - items:
+          - const: ti,am4372-timer
+          - const: ti,am335x-timer
+      - items:
+          - const: ti,am4372-timer-1ms
+          - const: ti,am335x-timer-1ms
+
+  reg:
+    items:
+      - description: IO address
+      - description: L3 to L4 mapping for omap4/5 L4 ABE
+    minItems: 1
+
+  clocks:
+    items:
+      - description: Functional clock
+      - description: System clock for omap4/5 and dra7
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+      - const: timer_sys_ck
+    minItems: 1
+
+  power-domains:
+    description:
+      Power domain if available
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt if available. The timer PWM features may be usable
+      in a limited way even without interrupts.
+    maxItems: 1
+
+  ti,timer-alwon:
+    description:
+      Timer is always enabled when the SoC is powered. Note that some SoCs like
+      am335x can suspend to PM coprocessor RTC only mode and in that case the
+      SoC power is cut including timers.
+    type: boolean
+
+  ti,timer-dsp:
+    description:
+      Timer is routable to the DSP in addition to the operating system.
+    type: boolean
+
+  ti,timer-pwm:
+    description:
+      Timer has been wired for PWM capability.
+    type: boolean
+
+  ti,timer-secure:
+    description:
+      Timer access has been limited to secure mode only.
+    type: boolean
+
+  ti,hwmods:
+    description:
+      Name of the HWMOD associated with timer. This is for legacy
+      omap2/3 platforms only.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am654-timer
+    then:
+      required:
+        - power-domains
+    else:
+      required:
+        - interrupts
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ti,omap3430-timer
+                - ti,omap4430-timer
+                - ti,omap5430-timer
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,dm814-timer
+              - ti,dm816-timer
+              - ti,omap2420-timer
+              - ti,omap3430-timer
+    then:
+      properties:
+        ti,hwmods:
+          items:
+            - pattern: "^timer([1-9]|1[0-2])$"
+    else:
+      properties:
+        ti,hwmods: false
+
+examples:
+  - |
+    timer1: timer@0 {
+      compatible = "ti,am335x-timer-1ms";
+      reg = <0x0 0x400>;
+      interrupts = <67>;
+      ti,timer-alwon;
+      clocks = <&timer1_fck>;
+      clock-names = "fck";
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/ti,timer.txt b/Documentation/devicetree/bindings/timer/ti,timer.txt
deleted file mode 100644
index d02e27c764ec..000000000000
--- a/Documentation/devicetree/bindings/timer/ti,timer.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-OMAP Timer bindings
-
-Required properties:
-- compatible:		Should be set to one of the below. Please note that
-			OMAP44xx devices have timer instances that are 100%
-			register compatible with OMAP3xxx devices as well as
-			newer timers that are not 100% register compatible.
-			So for OMAP44xx devices timer instances may use
-			different compatible strings.
-
-			ti,omap2420-timer (applicable to OMAP24xx devices)
-			ti,omap3430-timer (applicable to OMAP3xxx/44xx devices)
-			ti,omap4430-timer (applicable to OMAP44xx devices)
-			ti,omap5430-timer (applicable to OMAP543x devices)
-			ti,am335x-timer	(applicable to AM335x devices)
-			ti,am335x-timer-1ms (applicable to AM335x devices)
-
-- reg:			Contains timer register address range (base address and
-			length).
-- interrupts: 		Contains the interrupt information for the timer. The
-			format is being dependent on which interrupt controller
-			the OMAP device uses.
-- ti,hwmods:		Name of the hwmod associated to the timer, "timer<X>",
-			where <X> is the instance number of the timer from the
-			HW spec.
-
-Optional properties:
-- ti,timer-alwon:	Indicates the timer is in an alway-on power domain.
-- ti,timer-dsp:		Indicates the timer can interrupt the on-chip DSP in
-			addition to the ARM CPU.
-- ti,timer-pwm: 	Indicates the timer can generate a PWM output.
-- ti,timer-secure: 	Indicates the timer is reserved on a secure OMAP device
-			and therefore cannot be used by the kernel.
-
-Example:
-
-timer12: timer@48304000 {
-	compatible = "ti,omap3430-timer";
-	reg = <0x48304000 0x400>;
-	interrupts = <95>;
-	ti,hwmods = "timer12"
-	ti,timer-alwon;
-	ti,timer-secure;
-};
diff --git a/Documentation/devicetree/bindings/timer/xlnx,xps-timer.yaml b/Documentation/devicetree/bindings/timer/xlnx,xps-timer.yaml
new file mode 100644
index 000000000000..b1597db04263
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/xlnx,xps-timer.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/xlnx,xps-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx LogiCORE IP AXI Timer
+
+maintainers:
+  - Sean Anderson <sean.anderson@seco.com>
+
+properties:
+  compatible:
+    contains:
+      const: xlnx,xps-timer-1.00.a
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: s_axi_aclk
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  '#pwm-cells': true
+
+  xlnx,count-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32]
+    default: 32
+    description:
+      The width of the counter(s), in bits.
+
+  xlnx,one-timer-only:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Whether only one timer is present in this block.
+
+required:
+  - compatible
+  - reg
+  - xlnx,one-timer-only
+
+allOf:
+  - if:
+      required:
+        - '#pwm-cells'
+    then:
+      allOf:
+        - required:
+            - clocks
+        - properties:
+            xlnx,one-timer-only:
+              const: 0
+    else:
+      required:
+        - interrupts
+  - if:
+      required:
+        - clocks
+    then:
+      required:
+        - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@800e0000 {
+        clock-names = "s_axi_aclk";
+        clocks = <&zynqmp_clk 71>;
+        compatible = "xlnx,xps-timer-1.00.a";
+        reg = <0x800e0000 0x10000>;
+        interrupts = <0 39 2>;
+        xlnx,count-width = <16>;
+        xlnx,one-timer-only = <0x0>;
+    };
+
+    timer@800f0000 {
+        #pwm-cells = <0>;
+        clock-names = "s_axi_aclk";
+        clocks = <&zynqmp_clk 71>;
+        compatible = "xlnx,xps-timer-1.00.a";
+        reg = <0x800e0000 0x10000>;
+        xlnx,count-width = <32>;
+        xlnx,one-timer-only = <0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
new file mode 100644
index 000000000000..fd6a7b51f571
--- /dev/null
+++ b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timestamp/hardware-timestamps-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware timestamp providers
+
+maintainers:
+  - Dipen Patel <dipenp@nvidia.com>
+
+description:
+  Some devices/SoCs have hardware timestamp engines (HTE) which can use
+  hardware means to timestamp entity in realtime. The entity could be anything
+  from GPIOs, IRQs, Bus and so on. The hardware timestamp engine present
+  itself as a provider with the bindings described in this document.
+
+properties:
+  $nodename:
+    pattern: "^timestamp(@.*|-[0-9a-f])?$"
+
+  "#timestamp-cells":
+    description:
+      Number of cells in a HTE specifier.
+
+required:
+  - "#timestamp-cells"
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/timestamp/hte-consumer.yaml b/Documentation/devicetree/bindings/timestamp/hte-consumer.yaml
new file mode 100644
index 000000000000..5142d6d4fc0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/timestamp/hte-consumer.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timestamp/hte-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HTE Consumer
+
+maintainers:
+  - Dipen Patel <dipenp@nvidia.com>
+
+select: true
+
+properties:
+  timestamps:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      The list of HTE provider phandle. The first cell must represent the
+      provider phandle followed by the line identifiers. The meaning of the
+      line identifier and exact number of arguments must be specified in the
+      HTE provider device tree binding document.
+
+  timestamp-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      An optional string property to label each line specifier present in the
+      timestamp property.
+
+dependencies:
+  timestamp-names: [ timestamps ]
+
+additionalProperties: true
+
+examples:
+  - |
+    hte_tegra_consumer {
+              timestamps = <&tegra_hte_aon 0x9>, <&tegra_hte_lic 0x19>;
+              timestamp-names = "hte-gpio", "hte-i2c";
+    };
diff --git a/Documentation/devicetree/bindings/timestamp/nvidia,tegra194-hte.yaml b/Documentation/devicetree/bindings/timestamp/nvidia,tegra194-hte.yaml
new file mode 100644
index 000000000000..c31e207d1652
--- /dev/null
+++ b/Documentation/devicetree/bindings/timestamp/nvidia,tegra194-hte.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timestamp/nvidia,tegra194-hte.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra194 on chip generic hardware timestamping engine (HTE)
+
+maintainers:
+  - Dipen Patel <dipenp@nvidia.com>
+
+description:
+  Tegra SoC has two instances of generic hardware timestamping engines (GTE)
+  known as GTE GPIO and GTE IRQ, which can monitor subset of GPIO and on chip
+  IRQ lines for the state change respectively, upon detection it will record
+  timestamp (taken from system counter) in its internal hardware FIFO. It has
+  a bitmap array arranged in 32bit slices where each bit represent signal/line
+  to enable or disable for the hardware timestamping. The GTE GPIO monitors
+  GPIO lines from the AON (always on) GPIO controller.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-gte-aon
+      - nvidia,tegra194-gte-lic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nvidia,int-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HTE device generates its interrupt based on this u32 FIFO threshold
+      value. The recommended value is 1.
+    minimum: 1
+    maximum: 256
+
+  nvidia,slices:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HTE lines are arranged in 32 bit slice where each bit represents different
+      line/signal that it can enable/configure for the timestamp. It is u32
+      property and depends on the HTE instance in the chip. The value 3 is for
+      GPIO GTE and 11 for IRQ GTE.
+    enum: [3, 11]
+
+  '#timestamp-cells':
+    description:
+      This represents number of line id arguments as specified by the
+      consumers. For the GTE IRQ, this is IRQ number as mentioned in the
+      SoC technical reference manual. For the GTE GPIO, its value is same as
+      mentioned in the nvidia GPIO device tree binding document.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - nvidia,slices
+  - "#timestamp-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    tegra_hte_aon: timestamp@c1e0000 {
+              compatible = "nvidia,tegra194-gte-aon";
+              reg = <0xc1e0000 0x10000>;
+              interrupts = <0 13 0x4>;
+              nvidia,int-threshold = <1>;
+              nvidia,slices = <3>;
+              #timestamp-cells = <1>;
+    };
+
+  - |
+    tegra_hte_lic: timestamp@3aa0000 {
+              compatible = "nvidia,tegra194-gte-lic";
+              reg = <0x3aa0000 0x10000>;
+              interrupts = <0 11 0x4>;
+              nvidia,int-threshold = <1>;
+              nvidia,slices = <11>;
+              #timestamp-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 978de7d37c66..61746755c107 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -23,63 +23,84 @@ properties:
     maxItems: 1
   interrupts:
     maxItems: 1
+
+  spi-max-frequency: true
+
   compatible:
     items:
       - enum:
             # SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin
           - ad,ad7414
-            # ADM9240:  Complete System Hardware Monitor for uProcessor-Based Systems
+            # ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems
           - ad,adm9240
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7461
-            # +/-1C TDM Extended Temp Range I.C
-          - adt7461
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7473
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7475
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7476
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7490
-            # Three-Axis Digital Accelerometer
-          - adi,adxl345
-            # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)
-          - adi,adxl346
+            # AD5110 - Nonvolatile Digital Potentiometer
+          - adi,ad5110
+            # Analog Devices ADP5585 Keypad Decoder and I/O Expansion
+          - adi,adp5585
+            # Analog Devices ADP5585 Keypad Decoder and I/O Expansion with support for Row5
+          - adi,adp5585-02
+            # Analog Devices ADP5589 Keypad Decoder and I/O Expansion
+          - adi,adp5589
+            # Analog Devices LT7182S Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher
+          - adi,lt7182s
             # AMS iAQ-Core VOC Sensor
           - ams,iaq-core
-            # i2c serial eeprom  (24cxx)
+            # i2c serial eeprom (24cxx)
           - at,24c08
             # i2c trusted platform module (TPM)
           - atmel,at97sc3204t
-            # i2c h/w symmetric crypto module
+            # ATSHA204 - i2c h/w symmetric crypto module
+          - atmel,atsha204
+            # ATSHA204A - i2c h/w symmetric crypto module
           - atmel,atsha204a
             # i2c h/w elliptic curve crypto module
           - atmel,atecc508a
+            # BPA-RS600: Power Supply
+          - blutek,bpa-rs600
+            # Bosch Sensortec pressure, temperature, humididty and VOC sensor
+          - bosch,bme680
             # CM32181: Ambient Light Sensor
           - capella,cm32181
             # CM3232: Ambient Light Sensor
           - capella,cm3232
+            # CM3323: Ambient Light Sensor
+          - capella,cm3323
             # High-Precision Digital Thermometer
           - dallas,ds1631
             # Total-Elapsed-Time Recorder with Alarm
           - dallas,ds1682
             # Tiny Digital Thermometer and Thermostat
           - dallas,ds1775
+            # CPU Peripheral Monitor
+          - dallas,ds1780
             # CPU Supervisor with Nonvolatile Memory and Programmable I/O
           - dallas,ds4510
             # Digital Thermometer and Thermostat
           - dallas,ds75
+            # Delta AHE-50DC Open19 power shelf fan control module
+          - delta,ahe50dc-fan
+            # Delta Electronics DPS-650-AB power supply
+          - delta,dps650ab
+            # Delta Electronics DPS920AB 920W 54V Power Supply
+          - delta,dps920ab
+            # 1/4 Brick DC/DC Regulated Power Module
+          - delta,q54sj108a2
             # Devantech SRF02 ultrasonic ranger in I2C mode
           - devantech,srf02
             # Devantech SRF08 ultrasonic ranger
           - devantech,srf08
             # Devantech SRF10 ultrasonic ranger
           - devantech,srf10
+            # DH electronics GmbH on-board CPLD trivial SPI device
+          - dh,dhcom-board
             # DA9053: flexible system level PMIC with multicore support
           - dlg,da9053
-            # DA9063: system PMIC for quad-core application processors
-          - dlg,da9063
+            # DMARD05: 3-axis I2C Accelerometer
+          - domintech,dmard05
+            # DMARD06: 3-axis I2C Accelerometer
+          - domintech,dmard06
+            # DMARD05: 3-axis I2C Accelerometer
+          - domintech,dmard07
             # DMARD09: 3-axis Accelerometer
           - domintech,dmard09
             # DMARD10: 3-axis Accelerometer
@@ -92,22 +113,54 @@ properties:
           - fsl,mpl3115
             # MPR121: Proximity Capacitive Touch Sensor Controller
           - fsl,mpr121
-            # SGTL5000: Ultra Low-Power Audio Codec
-          - fsl,sgtl5000
-            # G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
-          - gmt,g751
+            # Monolithic Power Systems Inc. multi-phase controller mp2888
+          - mps,mp2888
+            # Monolithic Power Systems Inc. multi-phase controller mp2975
+          - mps,mp2975
+            # Honeywell Humidicon HIH-6130 humidity/temperature sensor
+          - honeywell,hi6130
+            # IBM Common Form Factor Power Supply Versions (all versions)
+          - ibm,cffps
+            # IBM Common Form Factor Power Supply Versions 1
+          - ibm,cffps1
+            # IBM Common Form Factor Power Supply Versions 2
+          - ibm,cffps2
+            # Infineon IR36021 digital POL buck controller
+          - infineon,ir36021
+            # Infineon IR38060 Voltage Regulator
+          - infineon,ir38060
             # Infineon IR38064 Voltage Regulator
           - infineon,ir38064
+            # Infineon IR38164 Voltage Regulator
+          - infineon,ir38164
+            # Infineon IR38263 Voltage Regulator
+          - infineon,ir38263
             # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
           - infineon,slb9635tt
             # Infineon SLB9645 I2C TPM (new protocol, max 400khz)
           - infineon,slb9645tt
+            # Infineon SLB9673 I2C TPM 2.0
+          - infineon,slb9673
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
           - infineon,tlv493d-a1b6
+            # Infineon Multi-phase Digital VR Controller xdpe11280
+          - infineon,xdpe11280
             # Infineon Multi-phase Digital VR Controller xdpe12254
           - infineon,xdpe12254
             # Infineon Multi-phase Digital VR Controller xdpe12284
           - infineon,xdpe12284
+            # Infineon Multi-phase Digital VR Controller xdpe15284
+          - infineon,xdpe15284
+            # Infineon Multi-phase Digital VR Controller xdpe152c4
+          - infineon,xdpe152c4
+            # Injoinic IP5108 2.0A Power Bank IC with I2C
+          - injoinic,ip5108
+            # Injoinic IP5109 2.1A Power Bank IC with I2C
+          - injoinic,ip5109
+            # Injoinic IP5207 1.2A Power Bank IC with I2C
+          - injoinic,ip5207
+            # Injoinic IP5209 2.4A Power Bank IC with I2C
+          - injoinic,ip5209
             # Inspur Power System power supply unit version 1
           - inspur,ipsps1
             # Intersil ISL29028 Ambient Light and Proximity Sensor
@@ -118,20 +171,26 @@ properties:
           - isil,isl68137
             # 5 Bit Programmable, Pulse-Width Modulator
           - maxim,ds1050
-            # 10-bit 8 channels 300ks/s SPI ADC with temperature sensor
-          - maxim,max1027
-            # 10-bit 12 channels 300ks/s SPI ADC with temperature sensor
-          - maxim,max1029
-            # 10-bit 16 channels 300ks/s SPI ADC with temperature sensor
-          - maxim,max1031
-            # 12-bit 8 channels 300ks/s SPI ADC with temperature sensor
-          - maxim,max1227
-            # 12-bit 12 channels 300ks/s SPI ADC with temperature sensor
-          - maxim,max1229
-            # 12-bit 16 channels 300ks/s SPI ADC with temperature sensor
-          - maxim,max1231
+            # 10 kOhm digital potentiometer with I2C interface
+          - maxim,ds1803-010
+            # 50 kOhm digital potentiometer with I2C interface
+          - maxim,ds1803-050
+            # 100 kOhm digital potentiometer with I2C interface
+          - maxim,ds1803-100
+            # 10 kOhm digital potentiometer with I2C interface
+          - maxim,ds3502
             # Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
           - maxim,max1237
+            # Temperature Sensor, I2C interface
+          - maxim,max1619
+            # 10-bit 10 kOhm linear programable voltage divider
+          - maxim,max5481
+            # 10-bit 50 kOhm linear programable voltage divider
+          - maxim,max5482
+            # 10-bit 10 kOhm linear programable variable resistor
+          - maxim,max5483
+            # 10-bit 50 kOhm linear programable variable resistor
+          - maxim,max5484
             # PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion
           - maxim,max6621
             # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
@@ -140,8 +199,50 @@ properties:
           - maxim,max31730
             # mCube 3-axis 8-bit digital accelerometer
           - mcube,mc3230
+            # Measurement Specialities I2C temperature and humidity sensor
+          - meas,htu21
+            # Measurement Specialities I2C pressure and temperature sensor
+          - meas,ms5637
+            # Measurement Specialities I2C pressure and temperature sensor
+          - meas,ms5803
+            # Measurement Specialities I2C pressure and temperature sensor
+          - meas,ms5805
+            # Measurement Specialities I2C pressure and temperature sensor
+          - meas,ms5837
+            # Measurement Specialities temp and humidity part of ms8607 device
+          - meas,ms8607-humidity
+            # Measurement Specialities temp and pressure part of ms8607 device
+          - meas,ms8607-temppressure
+            # Measurement Specialties temperature sensor
+          - meas,tsys01
+            # MEMSIC magnetometer
+          - memsic,mmc35240
+            # MEMSIC 3-axis accelerometer
+          - memsic,mx4005
             # MEMSIC 2-axis 8-bit digital accelerometer
           - memsic,mxc6225
+            # MEMSIC 2-axis 8-bit digital accelerometer
+          - memsic,mxc6255
+            # MEMSIC 3-axis accelerometer
+          - memsic,mxc6655
+            # Menlo on-board CPLD trivial SPI device
+          - menlo,m53cpld
+            # Microchip differential I2C ADC, 1 Channel, 18 bit
+          - microchip,mcp3421
+            # Microchip differential I2C ADC, 2 Channel, 18 bit
+          - microchip,mcp3422
+            # Microchip differential I2C ADC, 2 Channel, 18 bit
+          - microchip,mcp3423
+            # Microchip differential I2C ADC, 4 Channel, 18 bit
+          - microchip,mcp3424
+            # Microchip differential I2C ADC, 1 Channel, 16 bit
+          - microchip,mcp3425
+            # Microchip differential I2C ADC, 2 Channel, 16 bit
+          - microchip,mcp3426
+            # Microchip differential I2C ADC, 2 Channel, 16 bit
+          - microchip,mcp3427
+            # Microchip differential I2C ADC, 4 Channel, 16 bit
+          - microchip,mcp3428
             # Microchip 7-bit Single I2C Digital POT (5k)
           - microchip,mcp4017-502
             # Microchip 7-bit Single I2C Digital POT (10k)
@@ -166,134 +267,6 @@ properties:
           - microchip,mcp4019-503
             # Microchip 7-bit Single I2C Digital POT (100k)
           - microchip,mcp4019-104
-            # Microchip 7-bit Single I2C Digital Potentiometer (5k)
-          - microchip,mcp4531-502
-            # Microchip 7-bit Single I2C Digital Potentiometer (10k)
-          - microchip,mcp4531-103
-            # Microchip 7-bit Single I2C Digital Potentiometer (50k)
-          - microchip,mcp4531-503
-            # Microchip 7-bit Single I2C Digital Potentiometer (100k)
-          - microchip,mcp4531-104
-            # Microchip 7-bit Single I2C Digital Potentiometer (5k)
-          - microchip,mcp4532-502
-            # Microchip 7-bit Single I2C Digital Potentiometer (10k)
-          - microchip,mcp4532-103
-            # Microchip 7-bit Single I2C Digital Potentiometer (50k)
-          - microchip,mcp4532-503
-            # Microchip 7-bit Single I2C Digital Potentiometer (100k)
-          - microchip,mcp4532-104
-            # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k)
-          - microchip,mcp4541-502
-            # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k)
-          - microchip,mcp4541-103
-            # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k)
-          - microchip,mcp4541-503
-            # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k)
-          - microchip,mcp4541-104
-            # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k)
-          - microchip,mcp4542-502
-            # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k)
-          - microchip,mcp4542-103
-            # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k)
-          - microchip,mcp4542-503
-            # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k)
-          - microchip,mcp4542-104
-            # Microchip 8-bit Single I2C Digital Potentiometer (5k)
-          - microchip,mcp4551-502
-            # Microchip 8-bit Single I2C Digital Potentiometer (10k)
-          - microchip,mcp4551-103
-            # Microchip 8-bit Single I2C Digital Potentiometer (50k)
-          - microchip,mcp4551-503
-            # Microchip 8-bit Single I2C Digital Potentiometer (100k)
-          - microchip,mcp4551-104
-            # Microchip 8-bit Single I2C Digital Potentiometer (5k)
-          - microchip,mcp4552-502
-            # Microchip 8-bit Single I2C Digital Potentiometer (10k)
-          - microchip,mcp4552-103
-            # Microchip 8-bit Single I2C Digital Potentiometer (50k)
-          - microchip,mcp4552-503
-            # Microchip 8-bit Single I2C Digital Potentiometer (100k)
-          - microchip,mcp4552-104
-            # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k)
-          - microchip,mcp4561-502
-            # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k)
-          - microchip,mcp4561-103
-            # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k)
-          - microchip,mcp4561-503
-            # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k)
-          - microchip,mcp4561-104
-            # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k)
-          - microchip,mcp4562-502
-            # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k)
-          - microchip,mcp4562-103
-            # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k)
-          - microchip,mcp4562-503
-            # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k)
-          - microchip,mcp4562-104
-            # Microchip 7-bit Dual I2C Digital Potentiometer (5k)
-          - microchip,mcp4631-502
-            # Microchip 7-bit Dual I2C Digital Potentiometer (10k)
-          - microchip,mcp4631-103
-            # Microchip 7-bit Dual I2C Digital Potentiometer (50k)
-          - microchip,mcp4631-503
-            # Microchip 7-bit Dual I2C Digital Potentiometer (100k)
-          - microchip,mcp4631-104
-            # Microchip 7-bit Dual I2C Digital Potentiometer (5k)
-          - microchip,mcp4632-502
-            # Microchip 7-bit Dual I2C Digital Potentiometer (10k)
-          - microchip,mcp4632-103
-            # Microchip 7-bit Dual I2C Digital Potentiometer (50k)
-          - microchip,mcp4632-503
-            # Microchip 7-bit Dual I2C Digital Potentiometer (100k)
-          - microchip,mcp4632-104
-            # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k)
-          - microchip,mcp4641-502
-            # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k)
-          - microchip,mcp4641-103
-            # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k)
-          - microchip,mcp4641-503
-            # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k)
-          - microchip,mcp4641-104
-            # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k)
-          - microchip,mcp4642-502
-            # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k)
-          - microchip,mcp4642-103
-            # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k)
-          - microchip,mcp4642-503
-            # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k)
-          - microchip,mcp4642-104
-            # Microchip 8-bit Dual I2C Digital Potentiometer (5k)
-          - microchip,mcp4651-502
-            # Microchip 8-bit Dual I2C Digital Potentiometer (10k)
-          - microchip,mcp4651-103
-            # Microchip 8-bit Dual I2C Digital Potentiometer (50k)
-          - microchip,mcp4651-503
-            # Microchip 8-bit Dual I2C Digital Potentiometer (100k)
-          - microchip,mcp4651-104
-            # Microchip 8-bit Dual I2C Digital Potentiometer (5k)
-          - microchip,mcp4652-502
-            # Microchip 8-bit Dual I2C Digital Potentiometer (10k)
-          - microchip,mcp4652-103
-            # Microchip 8-bit Dual I2C Digital Potentiometer (50k)
-          - microchip,mcp4652-503
-            # Microchip 8-bit Dual I2C Digital Potentiometer (100k)
-          - microchip,mcp4652-104
-            # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k)
-          - microchip,mcp4661-502
-            # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k)
-          - microchip,mcp4661-103
-            # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k)
-          - microchip,mcp4661-503
-            # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k)
-          - microchip,mcp4661-104
-            # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k)
-          - microchip,mcp4662-502
-            # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k)
-          - microchip,mcp4662-103
-            # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k)
-          - microchip,mcp4662-503
-            # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k)
-          - microchip,mcp4662-104
             # PWM Fan Speed Controller With Fan Fault Detection
           - microchip,tc654
             # PWM Fan Speed Controller With Fan Fault Detection
@@ -310,9 +283,11 @@ properties:
           - national,lm75
             # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
           - national,lm80
+            # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
+          - national,lm81
             # Temperature sensor with integrated fan control
           - national,lm85
-            # ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface
+            # I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator
           - national,lm92
             # i2c trusted platform module (TPM)
           - nuvoton,npct501
@@ -320,10 +295,6 @@ properties:
           - nuvoton,npct601
             # Nuvoton Temperature Sensor
           - nuvoton,w83773g
-            # Octal SMBus and I2C registered interface
-          - nxp,pca9556
-            # 8-bit I2C-bus and SMBus I/O port with reset
-          - nxp,pca9557
             # OKI ML86V7667 video decoder
           - oki,ml86v7667
             # OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus
@@ -332,40 +303,86 @@ properties:
           - plx,pex8648
             # Pulsedlight LIDAR range-finding sensor
           - pulsedlight,lidar-lite-v2
+            # Renesas ISL29501 time-of-flight sensor
+          - renesas,isl29501
             # S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
           - samsung,24ad0xd1
+            # Samsung Exynos SoC SATA PHY I2C device
+          - samsung,exynos-sataphy-i2c
+            # Sensirion low power multi-pixel gas sensor with I2C interface
+          - sensirion,sgpc3
+            # Sensirion multi-pixel gas sensor with I2C interface
+          - sensirion,sgp30
+            # Sensirion gas sensor with I2C interface
+          - sensirion,sgp40
+            # Sensirion temperature & humidity sensor with I2C interface
+          - sensirion,sht4x
+            # Sensortek 3 axis accelerometer
+          - sensortek,stk8312
+            # Sensortek 3 axis accelerometer
+          - sensortek,stk8ba50
             # SGX Sensortech VZ89X Sensors
           - sgx,vz89x
             # Relative Humidity and Temperature Sensors
           - silabs,si7020
             # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
           - skyworks,sky81452
-            # i2c serial eeprom  (24cxx)
+            # Socionext SynQuacer TPM MMIO module
+          - socionext,synquacer-tpm-mmio
+            # SparkFun Qwiic Joystick (COM-15168) with i2c interface
+          - sparkfun,qwiic-joystick
+            # i2c serial eeprom (24cxx)
           - st,24c256
             # Ambient Light Sensor with SMBUS/Two Wire Serial Interface
           - taos,tsl2550
-            # 8-Channels, 12-bit ADC
-          - ti,ads7828
-            # 8-Channels, 8-bit ADC
-          - ti,ads7830
             # Temperature Monitoring and Fan Control
           - ti,amc6821
+            # Temperature and humidity sensor with i2c interface
+          - ti,hdc1000
+            # Temperature and humidity sensor with i2c interface
+          - ti,hdc1008
+            # Temperature and humidity sensor with i2c interface
+          - ti,hdc1010
+            # Temperature and humidity sensor with i2c interface
+          - ti,hdc1050
+            # Temperature and humidity sensor with i2c interface
+          - ti,hdc1080
+            # Thermometer with SPI interface
+          - ti,lm70
+          - ti,lm71
+            # Temperature sensor with 2-wire interface
+          - ti,lm73
+            # Thermometer with SPI interface
+          - ti,lm74
             # Temperature sensor with integrated fan control
           - ti,lm96000
             # I2C Touch-Screen Controller
           - ti,tsc2003
             # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
-          - ti,tmp102
-            # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
           - ti,tmp103
+            # Thermometer with SPI interface
+          - ti,tmp121
+          - ti,tmp122
+          - ti,tmp125
             # Digital Temperature Sensor
           - ti,tmp275
+            # TI DC-DC converter on PMBus
+          - ti,tps40400
+            # TI Dual channel DCAP+ multiphase controller TPS53676 with AVSBus
+          - ti,tps53676
             # TI Dual channel DCAP+ multiphase controller TPS53679
           - ti,tps53679
             # TI Dual channel DCAP+ multiphase controller TPS53688
           - ti,tps53688
+            # TI DC-DC converters on PMBus
+          - ti,tps544b20
+          - ti,tps544b25
+          - ti,tps544c20
+          - ti,tps544c25
             # Winbond/Nuvoton H/W Monitor
           - winbond,w83793
+            # Vicor Corporation Digital Supervisor
+          - vicor,pli1209bc
             # i2c trusted platform module (TPM)
           - winbond,wpct301
 
@@ -373,4 +390,6 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 ...
diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
deleted file mode 100644
index 02347b017abd..000000000000
--- a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Cadence Universal Flash Storage (UFS) Controller
-
-UFS nodes are defined to describe on-chip UFS host controllers.
-Each UFS controller instance should have its own node.
-Please see the ufshcd-pltfrm.txt for a list of all available properties.
-
-Required properties:
-- compatible	: Compatible list, contains one of the following controllers:
-			"cdns,ufshc" - Generic CDNS HCI,
-			"cdns,ufshc-m31-16nm" - CDNS UFS HC + M31 16nm PHY
-		  complemented with the JEDEC version:
-			"jedec,ufs-2.0"
-
-- reg		: Address and length of the UFS register set.
-- interrupts	: One interrupt mapping.
-- freq-table-hz	: Clock frequency table.
-		  See the ufshcd-pltfrm.txt for details.
-- clocks	: List of phandle and clock specifier pairs.
-- clock-names	: List of clock input name strings sorted in the same
-		  order as the clocks property. "core_clk" is mandatory.
-		  Depending on a type of a PHY,
-		  the "phy_clk" clock can also be added, if needed.
-
-Example:
-	ufs@fd030000 {
-		compatible = "cdns,ufshc", "jedec,ufs-2.0";
-		reg = <0xfd030000 0x10000>;
-		interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
-		freq-table-hz = <0 0>, <0 0>;
-		clocks = <&ufs_core_clk>, <&ufs_phy_clk>;
-		clock-names = "core_clk", "phy_clk";
-	};
diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml
new file mode 100644
index 000000000000..fb45f66d6454
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/cdns,ufshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Jan Kotas <jank@cadence.com>
+
+# Select only our matches, not all jedec,ufs-2.0
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - cdns,ufshc
+          - cdns,ufshc-m31-16nm
+  required:
+    - compatible
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - cdns,ufshc
+            # CDNS UFS HC + M31 16nm PHY
+          - cdns,ufshc-m31-16nm
+      - const: jedec,ufs-2.0
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core_clk
+      - const: phy_clk
+      - const: ref_clk
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ufs@fd030000 {
+        compatible = "cdns,ufshc", "jedec,ufs-2.0";
+        reg = <0xfd030000 0x10000>;
+        interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+        freq-table-hz = <0 0>, <0 0>;
+        clocks = <&ufs_core_clk>, <&ufs_phy_clk>;
+        clock-names = "core_clk", "phy_clk";
+    };
diff --git a/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml b/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml
new file mode 100644
index 000000000000..4432bfa0cbc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/hisilicon,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Li Wei <liwei213@huawei.com>
+
+# Select only our matches, not all jedec,ufs
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - hisilicon,hi3660-ufs
+          - hisilicon,hi3670-ufs
+  required:
+    - compatible
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: hisilicon,hi3660-ufs
+          - const: jedec,ufs-1.1
+      - items:
+          - enum:
+              - hisilicon,hi3670-ufs
+          - const: jedec,ufs-2.1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: phy_clk
+
+  reg:
+    items:
+      - description: UFS register address space
+      - description: UFS SYS CTRL register address space
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: rst
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/hi3670-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufs@ff3c0000 {
+            compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1";
+            reg = <0x0 0xff3c0000 0x0 0x1000>,
+                  <0x0 0xff3e0000 0x0 0x1000>;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
+                     <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
+            clock-names = "ref_clk", "phy_clk";
+            freq-table-hz = <0 0>,
+                            <0 0>;
+
+            resets = <&crg_rst 0x84 12>;
+            reset-names = "rst";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
new file mode 100644
index 000000000000..32fd535a514a
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/mediatek,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Stanley Chu <stanley.chu@mediatek.com>
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-ufshci
+      - mediatek,mt8192-ufshci
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ufs
+
+  phys:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - phys
+  - reg
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufs@ff3c0000 {
+            compatible = "mediatek,mt8183-ufshci";
+            reg = <0 0x11270000 0 0x2300>;
+            interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
+            phys = <&ufsphy>;
+
+            clocks = <&infracfg_ao CLK_INFRA_UFS>;
+            clock-names = "ufs";
+            freq-table-hz = <0 0>;
+
+            vcc-supply = <&mt_pmic_vemc_ldo_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
new file mode 100644
index 000000000000..f2d6298d926c
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -0,0 +1,246 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/qcom,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Andy Gross <agross@kernel.org>
+
+# Select only our matches, not all jedec,ufs-2.0
+select:
+  properties:
+    compatible:
+      contains:
+        const: qcom,ufshc
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,msm8994-ufshc
+          - qcom,msm8996-ufshc
+          - qcom,msm8998-ufshc
+          - qcom,sc8280xp-ufshc
+          - qcom,sdm845-ufshc
+          - qcom,sm6350-ufshc
+          - qcom,sm8150-ufshc
+          - qcom,sm8250-ufshc
+          - qcom,sm8350-ufshc
+          - qcom,sm8450-ufshc
+      - const: qcom,ufshc
+      - const: jedec,ufs-2.0
+
+  clocks:
+    minItems: 8
+    maxItems: 11
+
+  clock-names:
+    minItems: 8
+    maxItems: 11
+
+  interconnects:
+    minItems: 2
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: ufs-ddr
+      - const: cpu-ufs
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: ufsphy
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+  reset-names:
+    items:
+      - const: rst
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the RESET pin of the UFS memory device.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: ufs-common.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-ufshc
+              - qcom,sc8280xp-ufshc
+              - qcom,sm8250-ufshc
+              - qcom,sm8350-ufshc
+              - qcom,sm8450-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+            - const: rx_lane1_sync_clk
+        reg:
+          minItems: 1
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-ufshc
+              - qcom,sm6350-ufshc
+              - qcom,sm8150-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+            - const: rx_lane1_sync_clk
+            - const: ice_core_clk
+        reg:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 11
+          maxItems: 11
+        clock-names:
+          items:
+            - const: core_clk_src
+            - const: core_clk
+            - const: bus_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro_src
+            - const: core_clk_unipro
+            - const: core_clk_ice
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+        reg:
+          minItems: 1
+          maxItems: 1
+
+    # TODO: define clock bindings for qcom,msm8994-ufshc
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8450.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufs@1d84000 {
+            compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
+                         "jedec,ufs-2.0";
+            reg = <0 0x01d84000 0 0x3000>;
+            interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+            phys = <&ufs_mem_phy_lanes>;
+            phy-names = "ufsphy";
+            lanes-per-direction = <2>;
+            #reset-cells = <1>;
+            resets = <&gcc GCC_UFS_PHY_BCR>;
+            reset-names = "rst";
+            reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+            vcc-supply = <&vreg_l7b_2p5>;
+            vcc-max-microamp = <1100000>;
+            vccq-supply = <&vreg_l9b_1p2>;
+            vccq-max-microamp = <1200000>;
+
+            power-domains = <&gcc UFS_PHY_GDSC>;
+            iommus = <&apps_smmu 0xe0 0x0>;
+            interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>,
+                            <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
+            interconnect-names = "ufs-ddr", "cpu-ufs";
+
+            clock-names = "core_clk",
+                          "bus_aggr_clk",
+                          "iface_clk",
+                          "core_clk_unipro",
+                          "ref_clk",
+                          "tx_lane0_sync_clk",
+                          "rx_lane0_sync_clk",
+                          "rx_lane1_sync_clk";
+            clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+                     <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+                     <&gcc GCC_UFS_PHY_AHB_CLK>,
+                     <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+                     <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+                     <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+            freq-table-hz = <75000000 300000000>,
+                            <0 0>,
+                            <0 0>,
+                            <75000000 300000000>,
+                            <75000000 300000000>,
+                            <0 0>,
+                            <0 0>,
+                            <0 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml b/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml
new file mode 100644
index 000000000000..f04f9f61fa9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/renesas,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car UFS Host Controller
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    const: renesas,r8a779f0-ufs
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: fck
+      - const: ref_clk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    ufs: ufs@e686000 {
+            compatible = "renesas,r8a779f0-ufs";
+            reg = <0xe6860000 0x100>;
+            interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>;
+            clock-names = "fck", "ref_clk";
+            freq-table-hz = <200000000 200000000>, <38400000 38400000>;
+            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+            resets = <&cpg 1514>;
+    };
diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
new file mode 100644
index 000000000000..a9988798898d
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/samsung,exynos-ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series UFS host controller
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+
+description: |
+  Each Samsung UFS host controller instance should have its own node.
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7-ufs
+      - samsung,exynosautov9-ufs
+      - samsung,exynosautov9-ufs-vh
+      - tesla,fsd-ufs
+
+  reg:
+    items:
+      - description: HCI register
+      - description: vendor specific register
+      - description: unipro register
+      - description: UFS protector register
+
+  reg-names:
+    items:
+      - const: hci
+      - const: vs_hci
+      - const: unipro
+      - const: ufsp
+
+  clocks:
+    items:
+      - description: ufs link core clock
+      - description: unipro main clock
+
+  clock-names:
+    items:
+      - const: core_clk
+      - const: sclk_unipro_main
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: ufs-phy
+
+  samsung,sysreg:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    description: Should be phandle/offset pair. The phandle to the syscon node
+                 which indicates the FSYSx sysreg interface and the offset of
+                 the control register for UFS io coherency setting.
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - phys
+  - phy-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    ufs: ufs@15570000 {
+       compatible = "samsung,exynos7-ufs";
+       reg = <0x15570000 0x100>,
+             <0x15570100 0x100>,
+             <0x15571000 0x200>,
+             <0x15572000 0x300>;
+       reg-names = "hci", "vs_hci", "unipro", "ufsp";
+       interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+       clocks = <&clock_fsys1 ACLK_UFS20_LINK>,
+                <&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
+       clock-names = "core_clk", "sclk_unipro_main";
+       pinctrl-names = "default";
+       pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+       phys = <&ufs_phy>;
+       phy-names = "ufs-phy";
+    };
+...
diff --git a/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml b/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml
new file mode 100644
index 000000000000..671a70d95138
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/snps,tc-dwc-g210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Li Wei <liwei213@huawei.com>
+
+# Select only our matches, not all jedec,ufs
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - snps,dwc-ufshcd-1.40a
+  required:
+    - compatible
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - snps,g210-tc-6.00-20bit
+          - snps,g210-tc-6.00-40bit
+      - const: snps,dwc-ufshcd-1.40a
+      - const: jedec,ufs-2.0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ufs@d0000000 {
+        compatible = "snps,g210-tc-6.00-40bit",
+                     "snps,dwc-ufshcd-1.40a",
+                     "jedec,ufs-2.0";
+        reg = <0xd0000000 0x10000>;
+        interrupts = <24>;
+    };
diff --git a/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt b/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
deleted file mode 100644
index 71c0777960e9..000000000000
--- a/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Universal Flash Storage (UFS) DesignWare Host Controller
-
-DWC_UFS nodes are defined to describe on-chip UFS host controllers and MPHY.
-Each UFS controller instance should have its own node.
-
-Required properties:
-- compatible	: compatible list must contain the PHY type & version:
-			"snps,g210-tc-6.00-20bit"
-			"snps,g210-tc-6.00-40bit"
-		  complemented with the Controller IP version:
-			"snps,dwc-ufshcd-1.40a"
-		  complemented with the JEDEC version:
-			"jedec,ufs-1.1"
-			"jedec,ufs-2.0"
-
-- reg		: <registers mapping>
-- interrupts	: <interrupt mapping for UFS host controller IRQ>
-
-Example for a setup using a 1.40a DWC Controller with a 6.00 G210 40-bit TC:
-	dwc-ufs@d0000000 {
-		compatible = "snps,g210-tc-6.00-40bit",
-			     "snps,dwc-ufshcd-1.40a",
-			     "jedec,ufs-2.0";
-		reg = < 0xd0000000 0x10000 >;
-		interrupts = < 24 >;
-	};
diff --git a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
index c8a2a92074df..c5eca7735f76 100644
--- a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
@@ -25,6 +25,20 @@ properties:
   power-domains:
     maxItems: 1
 
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
 required:
   - compatible
   - reg
@@ -33,36 +47,44 @@ required:
 
 patternProperties:
   "^ufs@[0-9a-f]+$":
-    type: object
+    $ref: cdns,ufshc.yaml
     description: |
-      Cadence UFS controller node must be the child node. Refer
-      Documentation/devicetree/bindings/ufs/cdns,ufshc.txt for binding
-      documentation of child node
+      Cadence UFS controller node must be the child node.
+    unevaluatedProperties: false
+
+additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    ufs_wrapper: ufs-wrapper@4e80000 {
-       compatible = "ti,j721e-ufs";
-       reg = <0x0 0x4e80000 0x0 0x100>;
-       power-domains = <&k3_pds 277>;
-       clocks = <&k3_clks 277 1>;
-       assigned-clocks = <&k3_clks 277 1>;
-       assigned-clock-parents = <&k3_clks 277 4>;
-       #address-cells = <2>;
-       #size-cells = <2>;
-
-       ufs@4e84000 {
-          compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
-          reg = <0x0 0x4e84000 0x0 0x10000>;
-          interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-          freq-table-hz = <19200000 19200000>;
-          power-domains = <&k3_pds 277>;
-          clocks = <&k3_clks 277 1>;
-          assigned-clocks = <&k3_clks 277 1>;
-          assigned-clock-parents = <&k3_clks 277 4>;
-          clock-names = "core_clk";
-       };
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufs-wrapper@4e80000 {
+            compatible = "ti,j721e-ufs";
+            reg = <0x0 0x4e80000 0x0 0x100>;
+            power-domains = <&k3_pds 277>;
+            clocks = <&k3_clks 277 1>;
+            assigned-clocks = <&k3_clks 277 1>;
+            assigned-clock-parents = <&k3_clks 277 4>;
+
+            ranges = <0x0 0x0 0x0 0x4e80000 0x0 0x14000>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            ufs@4000 {
+                compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+                reg = <0x0 0x4000 0x0 0x10000>;
+                interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+                freq-table-hz = <19200000 19200000>;
+                power-domains = <&k3_pds 277>;
+                clocks = <&k3_clks 277 1>;
+                assigned-clocks = <&k3_clks 277 1>;
+                assigned-clock-parents = <&k3_clks 277 4>;
+                clock-names = "core_clk";
+            };
+        };
     };
diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
new file mode 100644
index 000000000000..47a4e9e1a775
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/ufs-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Universal Flash Storage (UFS) Host Controllers
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - Avri Altman <avri.altman@wdc.com>
+
+properties:
+  clocks: true
+
+  clock-names: true
+
+  freq-table-hz:
+    items:
+      items:
+        - description: Minimum frequency for given clock in Hz
+        - description: Maximum frequency for given clock in Hz
+    description: |
+      Array of <min max> operating frequencies in Hz stored in the same order
+      as the clocks property. If this property is not defined or a value in the
+      array is "0" then it is assumed that the frequency is set by the parent
+      clock or a fixed rate clock source.
+
+  interrupts:
+    maxItems: 1
+
+  lanes-per-direction:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    default: 2
+    description:
+      Number of lanes available per direction.  Note that it is assume same
+      number of lanes is used both directions at once.
+
+  vdd-hba-supply:
+    description:
+      Phandle to UFS host controller supply regulator node.
+
+  vcc-supply:
+    description:
+      Phandle to VCC supply regulator node.
+
+  vccq-supply:
+    description:
+      Phandle to VCCQ supply regulator node.
+
+  vccq2-supply:
+    description:
+      Phandle to VCCQ2 supply regulator node.
+
+  vcc-supply-1p8:
+    type: boolean
+    description:
+      For embedded UFS devices, valid VCC range is 1.7-1.95V or 2.7-3.6V. This
+      boolean property when set, specifies to use low voltage range of
+      1.7-1.95V. Note for external UFS cards this property is invalid and valid
+      VCC range is always 2.7-3.6V.
+
+  vcc-max-microamp:
+    description:
+      Specifies max. load that can be drawn from VCC supply.
+
+  vccq-max-microamp:
+    description:
+      Specifies max. load that can be drawn from VCCQ supply.
+
+  vccq2-max-microamp:
+    description:
+      Specifies max. load that can be drawn from VCCQ2 supply.
+
+dependencies:
+  freq-table-hz: [ 'clocks' ]
+
+required:
+  - interrupts
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
deleted file mode 100644
index 0b83df1a5418..000000000000
--- a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* Hisilicon Universal Flash Storage (UFS) Host Controller
-
-UFS nodes are defined to describe on-chip UFS hardware macro.
-Each UFS Host Controller should have its own node.
-
-Required properties:
-- compatible        : compatible list, contains one of the following -
-					"hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs
-					host controller present on Hi3660 chipset.
-					"hisilicon,hi3670-ufs", "jedec,ufs-2.1" for hisi ufs
-					host controller present on Hi3670 chipset.
-- reg               : should contain UFS register address space & UFS SYS CTRL register address,
-- interrupts        : interrupt number
-- clocks	        : List of phandle and clock specifier pairs
-- clock-names       : List of clock input name strings sorted in the same
-					order as the clocks property. "ref_clk", "phy_clk" is optional
-- freq-table-hz     : Array of <min max> operating frequencies stored in the same
-                      order as the clocks property. If this property is not
-                      defined or a value in the array is "0" then it is assumed
-                      that the frequency is set by the parent clock or a
-                      fixed rate clock source.
-- resets            : describe reset node register
-- reset-names       : reset node register, the "rst" corresponds to reset the whole UFS IP.
-
-Example:
-
-	ufs: ufs@ff3b0000 {
-		compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
-		/* 0: HCI standard */
-		/* 1: UFS SYS CTRL */
-		reg = <0x0 0xff3b0000 0x0 0x1000>,
-			<0x0 0xff3b1000 0x0 0x1000>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
-			<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
-		clock-names = "ref_clk", "phy_clk";
-		freq-table-hz = <0 0>, <0 0>;
-		/* offset: 0x84; bit: 12  */
-		resets = <&crg_rst 0x84 12>;
-		reset-names = "rst";
-	};
diff --git a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt b/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt
deleted file mode 100644
index 72aab8547308..000000000000
--- a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Mediatek Universal Flash Storage (UFS) Host Controller
-
-UFS nodes are defined to describe on-chip UFS hardware macro.
-Each UFS Host Controller should have its own node.
-
-To bind UFS PHY with UFS host controller, the controller node should
-contain a phandle reference to UFS M-PHY node.
-
-Required properties for UFS nodes:
-- compatible         : Compatible list, contains the following controller:
-                       "mediatek,mt8183-ufshci" for MediaTek UFS host controller
-                       present on MT81xx chipsets.
-- reg                : Address and length of the UFS register set.
-- phys               : phandle to m-phy.
-- clocks             : List of phandle and clock specifier pairs.
-- clock-names        : List of clock input name strings sorted in the same
-                       order as the clocks property. "ufs" is mandatory.
-                       "ufs": ufshci core control clock.
-- freq-table-hz      : Array of <min max> operating frequencies stored in the same
-                       order as the clocks property. If this property is not
-                       defined or a value in the array is "0" then it is assumed
-                       that the frequency is set by the parent clock or a
-                       fixed rate clock source.
-- vcc-supply         : phandle to VCC supply regulator node.
-
-Example:
-
-	ufsphy: phy@11fa0000 {
-		...
-	};
-
-	ufshci@11270000 {
-		compatible = "mediatek,mt8183-ufshci";
-		reg = <0 0x11270000 0 0x2300>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
-		phys = <&ufsphy>;
-
-		clocks = <&infracfg_ao INFRACFG_AO_UFS_CG>;
-		clock-names = "ufs";
-		freq-table-hz = <0 0>;
-
-		vcc-supply = <&mt_pmic_vemc_ldo_reg>;
-	};
diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
deleted file mode 100644
index fd59f93e9556..000000000000
--- a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY
-
-UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro.
-Each UFS PHY node should have its own node.
-
-To bind UFS PHY with UFS host controller, the controller node should
-contain a phandle reference to UFS PHY node.
-
-Required properties:
-- compatible        : compatible list, contains one of the following -
-			"qcom,ufs-phy-qmp-20nm" for 20nm ufs phy,
-			"qcom,ufs-phy-qmp-14nm" for legacy 14nm ufs phy,
-			"qcom,msm8996-ufs-phy-qmp-14nm" for 14nm ufs phy
-			 present on MSM8996 chipset.
-- reg               : should contain PHY register address space (mandatory),
-- reg-names         : indicates various resources passed to driver (via reg proptery) by name.
-                      Required "reg-names" is "phy_mem".
-- #phy-cells        : This property shall be set to 0
-- vdda-phy-supply   : phandle to main PHY supply for analog domain
-- vdda-pll-supply   : phandle to PHY PLL and Power-Gen block power supply
-- clocks	    : List of phandle and clock specifier pairs
-- clock-names       : List of clock input name strings sorted in the same
-		      order as the clocks property. "ref_clk_src", "ref_clk",
-		      "tx_iface_clk" & "rx_iface_clk" are mandatory but
-		      "ref_clk_parent" is optional
-
-Optional properties:
-- vdda-phy-max-microamp : specifies max. load that can be drawn from phy supply
-- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
-- vddp-ref-clk-supply   : phandle to UFS device ref_clk pad power supply
-- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
-- resets : specifies the PHY reset in the UFS controller
-
-Example:
-
-	ufsphy1: ufsphy@fc597000 {
-		compatible = "qcom,ufs-phy-qmp-20nm";
-		reg = <0xfc597000 0x800>;
-		reg-names = "phy_mem";
-		#phy-cells = <0>;
-		vdda-phy-supply = <&pma8084_l4>;
-		vdda-pll-supply = <&pma8084_l12>;
-		vdda-phy-max-microamp = <50000>;
-		vdda-pll-max-microamp = <1000>;
-		clock-names = "ref_clk_src",
-			"ref_clk_parent",
-			"ref_clk",
-			"tx_iface_clk",
-			"rx_iface_clk";
-		clocks = <&clock_rpm clk_ln_bb_clk>,
-			<&clock_gcc clk_pcie_1_phy_ldo >,
-			<&clock_gcc clk_ufs_phy_ldo>,
-			<&clock_gcc clk_gcc_ufs_tx_cfg_clk>,
-			<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
-		resets = <&ufshc 0>;
-	};
-
-	ufshc: ufshc@fc598000 {
-		#reset-cells = <1>;
-		...
-		phys = <&ufsphy1>;
-		phy-names = "ufsphy";
-	};
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
deleted file mode 100644
index 415ccdd7442d..000000000000
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-* Universal Flash Storage (UFS) Host Controller
-
-UFSHC nodes are defined to describe on-chip UFS host controllers.
-Each UFS controller instance should have its own node.
-
-Required properties:
-- compatible		: must contain "jedec,ufs-1.1" or "jedec,ufs-2.0"
-
-			  For Qualcomm SoCs must contain, as below, an
-			  SoC-specific compatible along with "qcom,ufshc" and
-			  the appropriate jedec string:
-			    "qcom,msm8994-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
-			    "qcom,msm8996-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
-			    "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
-			    "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
-			    "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
-- interrupts        : <interrupt mapping for UFS host controller IRQ>
-- reg               : <registers mapping>
-
-Optional properties:
-- phys                  : phandle to UFS PHY node
-- phy-names             : the string "ufsphy" when is found in a node, along
-                          with "phys" attribute, provides phandle to UFS PHY node
-- vdd-hba-supply        : phandle to UFS host controller supply regulator node
-- vcc-supply            : phandle to VCC supply regulator node
-- vccq-supply           : phandle to VCCQ supply regulator node
-- vccq2-supply          : phandle to VCCQ2 supply regulator node
-- vcc-supply-1p8        : For embedded UFS devices, valid VCC range is 1.7-1.95V
-                          or 2.7-3.6V. This boolean property when set, specifies
-			  to use low voltage range of 1.7-1.95V. Note for external
-			  UFS cards this property is invalid and valid VCC range is
-			  always 2.7-3.6V.
-- vcc-max-microamp      : specifies max. load that can be drawn from vcc supply
-- vccq-max-microamp     : specifies max. load that can be drawn from vccq supply
-- vccq2-max-microamp    : specifies max. load that can be drawn from vccq2 supply
-
-- clocks                : List of phandle and clock specifier pairs
-- clock-names           : List of clock input name strings sorted in the same
-                          order as the clocks property.
-			  "ref_clk" indicates reference clock frequency.
-			  UFS host supplies reference clock to UFS device and UFS device
-			  specification allows host to provide one of the 4 frequencies (19.2 MHz,
-			  26 MHz, 38.4 MHz, 52MHz) for reference clock. This "ref_clk" entry is
-			  parsed and used to update the reference clock setting in device.
-			  Defaults to 26 MHz(as per specification) if not specified by host.
-- freq-table-hz		: Array of <min max> operating frequencies stored in the same
-                          order as the clocks property. If this property is not
-			  defined or a value in the array is "0" then it is assumed
-			  that the frequency is set by the parent clock or a
-			  fixed rate clock source.
--lanes-per-direction	: number of lanes available per direction - either 1 or 2.
-			  Note that it is assume same number of lanes is used both
-			  directions at once. If not specified, default is 2 lanes per direction.
-- #reset-cells		: Must be <1> for Qualcomm UFS controllers that expose
-			  PHY reset from the UFS controller.
-- resets            : reset node register
-- reset-names       : describe reset node register, the "rst" corresponds to reset the whole UFS IP.
-- reset-gpios       : A phandle and gpio specifier denoting the GPIO connected
-		      to the RESET pin of the UFS memory device.
-
-Note: If above properties are not defined it can be assumed that the supply
-regulators or clocks are always on.
-
-Example:
-	ufshc@fc598000 {
-		compatible = "jedec,ufs-1.1";
-		reg = <0xfc598000 0x800>;
-		interrupts = <0 28 0>;
-
-		vdd-hba-supply = <&xxx_reg0>;
-		vcc-supply = <&xxx_reg1>;
-		vcc-supply-1p8;
-		vccq-supply = <&xxx_reg2>;
-		vccq2-supply = <&xxx_reg3>;
-		vcc-max-microamp = 500000;
-		vccq-max-microamp = 200000;
-		vccq2-max-microamp = 200000;
-
-		clocks = <&core 0>, <&ref 0>, <&phy 0>, <&iface 0>;
-		clock-names = "core_clk", "ref_clk", "phy_clk", "iface_clk";
-		freq-table-hz = <100000000 200000000>, <0 0>, <0 0>, <0 0>;
-		resets = <&reset 0 1>;
-		reset-names = "rst";
-		phys = <&ufsphy1>;
-		phy-names = "ufsphy";
-		#reset-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml
index d9207bf9d894..8992eff6ce38 100644
--- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml
+++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/allwinner,sun4i-a10-musb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 mUSB OTG Controller Device Tree Bindings
+title: Allwinner A10 mUSB OTG Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -20,8 +20,12 @@ properties:
       - items:
           - enum:
               - allwinner,sun8i-a83t-musb
+              - allwinner,sun20i-d1-musb
               - allwinner,sun50i-h6-musb
           - const: allwinner,sun8i-a33-musb
+      - items:
+          - const: allwinner,sun50i-h616-musb
+          - const: allwinner,sun8i-h3-musb
 
   reg:
     maxItems: 1
@@ -39,7 +43,7 @@ properties:
     maxItems: 1
 
   phys:
-    description: PHY specifier for the OTG PHY
+    maxItems: 1
 
   phy-names:
     const: usb
diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
index 7a198a30408a..654ffc62d013 100644
--- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -61,8 +61,9 @@ DMA
   endpoint number (0 … 14 for endpoints 1 … 15 on instance 0 and 15 … 29
   for endpoints 1 … 15 on instance 1). The second number is 0 for RX and
   1 for TX transfers.
-- #dma-channels: should be set to 30 representing the 15 endpoints for
+- dma-channels: should be set to 30 representing the 15 endpoints for
   each USB instance.
+- #dma-channels: deprecated
 
 Example:
 ~~~~~~~~
@@ -193,7 +194,7 @@ usb: usb@47400000 {
 		interrupts = <17>;
 		interrupt-names = "glue";
 		#dma-cells = <2>;
-		#dma-channels = <30>;
-		#dma-requests = <256>;
+		dma-channels = <30>;
+		dma-requests = <256>;
 	};
 };
diff --git a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt
deleted file mode 100644
index 9a8b631904fd..000000000000
--- a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Amlogic Meson GX DWC3 USB SoC controller
-
-Required properties:
-- compatible:	depending on the SoC this should contain one of:
-			* amlogic,meson-axg-dwc3
-			* amlogic,meson-gxl-dwc3
-- clocks:	a handle for the "USB general" clock
-- clock-names:	must be "usb_general"
-- resets:	a handle for the shared "USB OTG" reset line
-- reset-names:	must be "usb_otg"
-
-Required child node:
-A child node must exist to represent the core DWC3 IP block. The name of
-the node is not important. The content of the node is defined in dwc3.txt.
-
-PHY documentation is provided in the following places:
-- Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt
-- Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt
-
-Example device nodes:
-		usb0: usb@ff500000 {
-			compatible = "amlogic,meson-axg-dwc3";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			clocks = <&clkc CLKID_USB>;
-			clock-names = "usb_general";
-			resets = <&reset RESET_USB_OTG>;
-			reset-names = "usb_otg";
-
-			dwc3: dwc3@ff500000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0xff500000 0x0 0x100000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				dr_mode = "host";
-				maximum-speed = "high-speed";
-				snps,dis_u2_susphy_quirk;
-				phys = <&usb3_phy>, <&usb2_phy0>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
index 267fce165994..daf2a859418d 100644
--- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
+++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson G12A DWC3 USB SoC Controller Glue
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3
@@ -22,10 +22,19 @@ description: |
   The DWC3 Glue controls the PHY routing and power, an interrupt line is
   connected to the Glue to serve as OTG ID change detection.
 
+  The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in
+  host-only mode.
+
+  The Amlogic GXL, GXM & AXG SoCs doesn't embed an USB3 PHY.
+
 properties:
   compatible:
     enum:
+      - amlogic,meson-gxl-usb-ctrl
+      - amlogic,meson-gxm-usb-ctrl
+      - amlogic,meson-axg-usb-ctrl
       - amlogic,meson-g12a-usb-ctrl
+      - amlogic,meson-a1-usb-ctrl
 
   ranges: true
 
@@ -37,6 +46,11 @@ properties:
 
   clocks:
     minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
 
   resets:
     minItems: 1
@@ -48,10 +62,8 @@ properties:
     maxItems: 1
 
   phy-names:
-    items:
-      - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used
-      - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
-      - const: usb3-phy0 # USB3 PHY if USB3_0 is used
+    minItems: 1
+    maxItems: 3
 
   phys:
     minItems: 1
@@ -67,7 +79,9 @@ properties:
 
 patternProperties:
   "^usb@[0-9a-f]+$":
-    type: object
+    oneOf:
+      - $ref: dwc2.yaml#
+      - $ref: snps,dwc3.yaml#
 
 additionalProperties: false
 
@@ -84,11 +98,107 @@ required:
   - phys
   - dr_mode
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-g12a-usb-ctrl
+
+    then:
+      properties:
+        phy-names:
+          items:
+            - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+            - const: usb3-phy0 # USB3 PHY if USB3_0 is used
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gxl-usb-ctrl
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: ddr
+        phy-names:
+          items:
+            - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gxm-usb-ctrl
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: ddr
+        phy-names:
+          items:
+            - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+            - const: usb2-phy2 # USB2 PHY2 if USBOTG_C port is used
+
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-usb-ctrl
+
+    then:
+      properties:
+        phy-names:
+          items:
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: ddr
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-a1-usb-ctrl
+
+    then:
+      properties:
+        phy-names:
+          items:
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: usb_bus
+            - const: xtal_usb_ctrl
+      required:
+        - clock-names
+
 examples:
   - |
     usb: usb@ffe09000 {
           compatible = "amlogic,meson-g12a-usb-ctrl";
-          reg = <0x0 0xffe09000 0x0 0xa0>;
+          reg = <0xffe09000 0xa0>;
           interrupts = <16>;
           #address-cells = <1>;
           #size-cells = <1>;
@@ -121,7 +231,6 @@ examples:
               interrupts = <30>;
               dr_mode = "host";
               snps,dis_u2_susphy_quirk;
-              snps,quirk-frame-length-adjustment;
+              snps,quirk-frame-length-adjustment = <0x20>;
           };
     };
-
diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
new file mode 100644
index 000000000000..0e72c08e6566
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/analogix,anx7411.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7411 Type-C controller bindings
+
+maintainers:
+  - Xin Ji <xji@analogixsemi.com>
+
+properties:
+  compatible:
+    enum:
+      - analogix,anx7411
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml
+    unevaluatedProperties: false
+
+    description:
+      Properties for usb c connector.
+
+    properties:
+      compatible:
+        const: usb-c-connector
+
+      power-role: true
+
+      data-role: true
+
+      try-power-role: true
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec@2c {
+            compatible = "analogix,anx7411";
+            reg = <0x2c>;
+            interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio0>;
+
+            typec_con: connector {
+                compatible = "usb-c-connector";
+                power-role = "dual";
+                data-role = "dual";
+                try-power-role = "source";
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                        reg = <0>;
+                        typec_con_ep: endpoint {
+                            remote-endpoint = <&usbotg_hs_ep>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/aspeed,ast2600-udc.yaml b/Documentation/devicetree/bindings/usb/aspeed,ast2600-udc.yaml
new file mode 100644
index 000000000000..c3b6be3d8002
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/aspeed,ast2600-udc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 Facebook Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/aspeed,ast2600-udc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED USB 2.0 Device Controller
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+
+description: |+
+  The ASPEED USB 2.0 Device Controller implements 1 control endpoint and
+  4 generic endpoints for AST260x.
+
+  Supports independent DMA channel for each generic endpoint.
+  Supports 32/256 stages descriptor mode for all generic endpoints.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-udc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    udc: usb@1e6a2000 {
+        compatible = "aspeed,ast2600-udc";
+        reg = <0x1e6a2000 0x300>;
+        interrupts = <9>;
+        clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_usb2bd_default>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
new file mode 100644
index 000000000000..a86bcd95100e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 Facebook Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/aspeed,usb-vhub.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED USB 2.0 Virtual Hub Controller
+
+maintainers:
+  - Benjamin Herrenschmidt <benh@kernel.crashing.org>
+
+description: |+
+  The ASPEED USB 2.0 Virtual Hub Controller implements 1 set of USB Hub
+  register and several sets of Device and Endpoint registers to support
+  the Virtual Hub's downstream USB devices.
+
+  Supported number of devices and endpoints vary depending on hardware
+  revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices
+  and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream
+  devices and 21 generic endpoints.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-usb-vhub
+      - aspeed,ast2500-usb-vhub
+      - aspeed,ast2600-usb-vhub
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  aspeed,vhub-downstream-ports:
+    description: Number of downstream ports supported by the Virtual Hub
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 5
+    minimum: 1
+    maximum: 7
+
+  aspeed,vhub-generic-endpoints:
+    description: Number of generic endpoints supported by the Virtual Hub
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 15
+    minimum: 1
+    maximum: 21
+
+  vhub-vendor-id:
+    description: vhub Vendor ID
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 65535
+
+  vhub-product-id:
+    description: vhub Product ID
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 65535
+
+  vhub-device-revision:
+    description: vhub Device Revision in binary-coded decimal
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 65535
+
+  vhub-strings:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^string@[0-9a-f]+$':
+        type: object
+        additionalProperties: false
+        description: string descriptors of the specific language
+
+        properties:
+          reg:
+            maxItems: 1
+            description: 16-bit Language Identifier defined by USB-IF
+
+          manufacturer:
+            description: vhub manufacturer
+            $ref: /schemas/types.yaml#/definitions/string
+
+          product:
+            description: vhub product name
+            $ref: /schemas/types.yaml#/definitions/string
+
+          serial-number:
+            description: vhub device serial number
+            $ref: /schemas/types.yaml#/definitions/string
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - aspeed,vhub-downstream-ports
+  - aspeed,vhub-generic-endpoints
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    vhub: usb-vhub@1e6a0000 {
+            compatible = "aspeed,ast2500-usb-vhub";
+            reg = <0x1e6a0000 0x300>;
+            interrupts = <5>;
+            clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+            aspeed,vhub-downstream-ports = <5>;
+            aspeed,vhub-generic-endpoints = <15>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_usb2ad_default>;
+
+            vhub-vendor-id = <0x1d6b>;
+            vhub-product-id = <0x0107>;
+            vhub-device-revision = <0x0100>;
+            vhub-strings {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                string@409 {
+                        reg = <0x409>;
+                        manufacturer = "ASPEED";
+                        product = "USB Virtual Hub";
+                        serial-number = "0000";
+                };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 44e80153b148..12183ef47ee4 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -39,6 +39,10 @@ Required properties:
 		"ehci_clk" for the peripheral clock
 		"usb_clk" for the UTMI clock
 
+Optional properties:
+ - phy_type : For multi port host USB controllers, should be one of
+   "utmi", or "hsic".
+
 usb1: ehci@800000 {
 	compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 	reg = <0x00800000 0x100000>;
@@ -82,19 +86,25 @@ Required properties:
 	       "atmel,at91sam9rl-udc"
 	       "atmel,at91sam9g45-udc"
 	       "atmel,sama5d3-udc"
+	       "microchip,sam9x60-udc"
+	       "microchip,lan9662-udc"
+	       For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc"
+	       is required.
  - reg: Address and length of the register set for the device
  - interrupts: Should contain usba interrupt
  - clocks: Should reference the peripheral and host clocks
  - clock-names: Should contain two strings
 		"pclk" for the peripheral clock
 		"hclk" for the host clock
+
+Deprecated property:
  - ep childnode: To specify the number of endpoints and their properties.
 
 Optional properties:
  - atmel,vbus-gpio: If present, specifies a gpio that allows to detect whether
    vbus is present (USB is connected).
 
-Required child node properties:
+Deprecated child node properties:
  - name: Name of the endpoint.
  - reg: Num of the endpoint.
  - atmel,fifo-size: Size of the fifo.
@@ -112,56 +122,4 @@ usb2: gadget@fff78000 {
 	clocks = <&utmi>, <&udphs_clk>;
 	clock-names = "hclk", "pclk";
 	atmel,vbus-gpio = <&pioB 19 0>;
-
-	ep@0 {
-		reg = <0>;
-		atmel,fifo-size = <64>;
-		atmel,nb-banks = <1>;
-	};
-
-	ep@1 {
-		reg = <1>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <2>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
-
-	ep@2 {
-		reg = <2>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <2>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
-
-	ep@3 {
-		reg = <3>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-	};
-
-	ep@4 {
-		reg = <4>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-	};
-
-	ep@5 {
-		reg = <5>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
-
-	ep@6 {
-		reg = <6>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
 };
diff --git a/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
new file mode 100644
index 000000000000..ad075407d85e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/brcm,bcm7445-ehci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB USB EHCI Controller
+
+allOf:
+  - $ref: "usb-hcd.yaml"
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm7445-ehci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Clock specifier for the EHCI clock
+
+  clock-names:
+    const: sw_usb
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usbphy
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phys
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    usb@f0b00300 {
+        compatible = "brcm,bcm7445-ehci";
+        reg = <0xf0b00300 0xa8>;
+        interrupts = <0x0 0x5a 0x0>;
+        phys = <&usbphy_0 0x0>;
+        phy-names = "usbphy";
+        clocks = <&usb20>;
+        clock-names = "sw_usb";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
deleted file mode 100644
index 63e63af3bf59..000000000000
--- a/Documentation/devicetree/bindings/usb/brcm,bdc.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Broadcom USB Device Controller (BDC)
-====================================
-
-Required properties:
-
-- compatible: must be one of:
-                "brcm,bdc-v0.16"
-                "brcm,bdc"
-- reg: the base register address and length
-- interrupts: the interrupt line for this controller
-
-Optional properties:
-
-On Broadcom STB platforms, these properties are required:
-
-- phys: phandle to one or two USB PHY blocks
-        NOTE: Some SoC's have a single phy and some have
-        USB 2.0 and USB 3.0 phys
-- clocks: phandle to the functional clock of this block
-
-Example:
-
-        bdc@f0b02000 {
-                compatible = "brcm,bdc-v0.16";
-                reg = <0xf0b02000 0xfc4>;
-                interrupts = <0x0 0x60 0x0>;
-                phys = <&usbphy_0 0x0>;
-                clocks = <&sw_usbd>;
-        };
diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.yaml b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml
new file mode 100644
index 000000000000..9e561fee98f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/brcm,bdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom USB Device Controller (BDC)
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bdc-udc-v2
+          - brcm,bdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    minItems: 1
+    items:
+      - description: USB 2.0 or 3.0 PHY
+      - description: USB 3.0 PHY if there is a dedicated 2.0 PHY
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+        usb@f0b02000 {
+                compatible = "brcm,bdc-udc-v2";
+                reg = <0xf0b02000 0xfc4>;
+                interrupts = <0x0 0x60 0x0>;
+                phys = <&usbphy_0 0x0>;
+                clocks = <&sw_usbd>;
+        };
diff --git a/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
new file mode 100644
index 000000000000..5cc81ced589d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/brcm,usb-pinmap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom USB pin map Controller
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - const: brcm,usb-pinmap
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt for signals mirrored to out-gpios.
+
+  in-gpios:
+    minItems: 1
+    maxItems: 2
+    description: Array of one or two GPIO pins used for input signals.
+
+  brcm,in-functions:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Array of input signal names, one per gpio in in-gpios.
+
+  brcm,in-masks:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Array of enable and mask pairs, one per gpio in-gpios.
+
+  out-gpios:
+    maxItems: 1
+    description: Array of one GPIO pin used for output signals.
+
+  brcm,out-functions:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Array of output signal names, one per gpio in out-gpios.
+
+  brcm,out-masks:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Array of enable, value, changed and clear masks, one
+      per gpio in out-gpios.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+dependencies:
+  in-gpios: [ interrupts ]
+
+examples:
+  - |
+    usb_pinmap: usb-pinmap@22000d0 {
+        compatible = "brcm,usb-pinmap";
+        reg = <0x22000d0 0x4>;
+        in-gpios = <&gpio 18 0>, <&gpio 19 0>;
+        brcm,in-functions = "VBUS", "PWRFLT";
+        brcm,in-masks = <0x8000 0x40000 0x10000 0x80000>;
+        out-gpios = <&gpio 20 0>;
+        brcm,out-functions = "PWRON";
+        brcm,out-masks = <0x20000 0x800000 0x400000 0x200000>;
+        interrupts = <0x0 0xb2 0x4>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
new file mode 100644
index 000000000000..dc9d6ed0781d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/cdns,usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence USBSS-DRD controller bindings
+
+maintainers:
+  - Pawel Laszczak <pawell@cadence.com>
+
+properties:
+  compatible:
+    const: cdns,usb3
+
+  reg:
+    items:
+      - description: OTG controller registers
+      - description: XHCI Host controller registers
+      - description: DEVICE controller registers
+
+  reg-names:
+    items:
+      - const: otg
+      - const: xhci
+      - const: dev
+
+  interrupts:
+    minItems: 3
+    items:
+      - description: XHCI host controller interrupt
+      - description: Device controller interrupt
+      - description: OTG/DRD controller interrupt
+      - description: interrupt used to wake up core, e.g when usbcmd.rs is
+                     cleared by xhci core, this interrupt is optional
+
+  interrupt-names:
+    minItems: 3
+    items:
+      - const: host
+      - const: peripheral
+      - const: otg
+      - const: wakeup
+
+  dr_mode:
+    enum: [host, otg, peripheral]
+
+  maximum-speed:
+    enum: [super-speed, high-speed, full-speed]
+
+  phys:
+    minItems: 1
+    maxItems: 2
+
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      anyOf:
+        - const: cdns3,usb2-phy
+        - const: cdns3,usb3-phy
+
+  cdns,on-chip-buff-size:
+    description:
+      size of memory intended as internal memory for endpoints
+      buffers expressed in KB
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cdns,phyrst-a-enable:
+    description: Enable resetting of PHY if Rx fail is detected
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@6000000 {
+            compatible = "cdns,usb3";
+            reg = <0x00 0x6000000 0x00 0x10000>,
+                  <0x00 0x6010000 0x00 0x10000>,
+                  <0x00 0x6020000 0x00 0x10000>;
+            reg-names = "otg", "xhci", "dev";
+            interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "host", "peripheral", "otg";
+            maximum-speed = "super-speed";
+            dr_mode = "otg";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
deleted file mode 100644
index b7dc606d37b5..000000000000
--- a/Documentation/devicetree/bindings/usb/cdns-usb3.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Binding for the Cadence USBSS-DRD controller
-
-Required properties:
- - reg: Physical base address and size of the controller's register areas.
-	 Controller has 3 different regions:
-	 - HOST registers area
-	 - DEVICE registers area
-	 - OTG/DRD registers area
- - reg-names - register memory area names:
-	"xhci" - for HOST registers space
-	"dev" - for DEVICE registers space
-	"otg" - for OTG/DRD registers space
- - compatible: Should contain: "cdns,usb3"
- - interrupts: Interrupts used by cdns3 controller:
-	"host" - interrupt used by XHCI driver.
-	"peripheral" - interrupt used by device driver
-	"otg" - interrupt used by DRD/OTG  part of driver
-
-Optional properties:
- - maximum-speed : valid arguments are "super-speed", "high-speed" and
-                   "full-speed"; refer to usb/generic.txt
- - dr_mode: Should be one of "host", "peripheral" or "otg".
- - phys: reference to the USB PHY
- - phy-names: from the *Generic PHY* bindings;
-	Supported names are:
-	- cdns3,usb2-phy
-	- cdns3,usb3-phy
-
- - cdns,on-chip-buff-size : size of memory intended as internal memory for endpoints
-	buffers expressed in KB
-
-Example:
-	usb@f3000000 {
-		compatible = "cdns,usb3";
-		interrupts = <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_USB_IRQ  7 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_USB_IRQ  8 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host", "peripheral", "otg";
-		reg = <0xf3000000 0x10000>,	/* memory area for HOST registers */
-			<0xf3010000 0x10000>,	/* memory area for DEVICE registers */
-			<0xf3020000 0x10000>;	/* memory area for OTG/DRD registers */
-		reg-names = "xhci", "dev", "otg";
-		phys = <&usb2_phy>, <&usb3_phy>;
-		phy-names = "cdns3,usb2-phy", "cnds3,usb3-phy";
-	};
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 51376cbe5f3d..ba51fb1252b9 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -100,6 +100,15 @@ i.mx specific properties
   It's recommended to specify the over current polarity.
 - power-active-high: power signal polarity is active high
 - external-vbus-divider: enables off-chip resistor divider for Vbus
+- samsung,picophy-pre-emp-curr-control: HS Transmitter Pre-Emphasis Current
+  Control. This signal controls the amount of current sourced to the
+  USB_OTG*_DP and USB_OTG*_DN pins after a J-to-K or K-to-J transition.
+  The range is from 0x0 to 0x3, the default value is 0x1.
+  Details can refer to TXPREEMPAMPTUNE0 bits of USBNC_n_PHY_CFG1.
+- samsung,picophy-dc-vol-level-adjust: HS DC Voltage Level Adjustment.
+  Adjust the high-speed transmitter DC level voltage.
+  The range is from 0x0 to 0xf, the default value is 0x3.
+  Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
 
 Example:
 
@@ -142,7 +151,7 @@ Example for HSIC:
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		usbnet: smsc@1 {
+		usbnet: ethernet@1 {
 			compatible = "usb424,9730";
 			reg = <1>;
 		};
diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
index 9ce22551b2b3..fb2027a7d80d 100644
--- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -36,7 +36,8 @@ DMA
 - #dma-cells: should be set to 2. The first number represents the
   channel number (0 … 3 for endpoints 1 … 4).
   The second number is 0 for RX and 1 for TX transfers.
-- #dma-channels: should be set to 4 representing the 4 endpoints.
+- dma-channels: should be set to 4 representing the 4 endpoints.
+- #dma-channels: deprecated
 
 Example:
 	usb_phy: usb-phy {
@@ -74,7 +75,7 @@ Example:
 			reg-names = "controller", "scheduler", "queuemgr";
 			interrupts = <58>;
 			#dma-cells = <2>;
-			#dma-channels = <4>;
+			dma-channels = <4>;
 		};
 
 	};
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index 71cf7ba32237..dc4988c0009c 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -9,56 +9,61 @@ title: DesignWare HS OTG USB 2.0 controller Bindings
 maintainers:
   - Rob Herring <robh@kernel.org>
 
+allOf:
+  - $ref: usb-drd.yaml#
+  - $ref: usb-hcd.yaml#
+
 properties:
   compatible:
     oneOf:
       - const: brcm,bcm2835-usb
       - const: hisilicon,hi6220-usb
+      - const: ingenic,jz4775-otg
+      - const: ingenic,jz4780-otg
+      - const: ingenic,x1000-otg
+      - const: ingenic,x1600-otg
+      - const: ingenic,x1700-otg
+      - const: ingenic,x1830-otg
+      - const: ingenic,x2000-otg
       - items:
           - const: rockchip,rk3066-usb
           - const: snps,dwc2
       - items:
-          - const: rockchip,px30-usb
-          - const: rockchip,rk3066-usb
-          - const: snps,dwc2
-      - items:
-          - const: rockchip,rk3036-usb
-          - const: rockchip,rk3066-usb
-          - const: snps,dwc2
-      - items:
-          - const: rockchip,rv1108-usb
-          - const: rockchip,rk3066-usb
-          - const: snps,dwc2
-      - items:
-          - const: rockchip,rk3188-usb
-          - const: rockchip,rk3066-usb
-          - const: snps,dwc2
-      - items:
-          - const: rockchip,rk3228-usb
-          - const: rockchip,rk3066-usb
-          - const: snps,dwc2
-      - items:
-          - const: rockchip,rk3288-usb
+          - enum:
+              - rockchip,px30-usb
+              - rockchip,rk3036-usb
+              - rockchip,rk3128-usb
+              - rockchip,rk3188-usb
+              - rockchip,rk3228-usb
+              - rockchip,rk3288-usb
+              - rockchip,rk3308-usb
+              - rockchip,rk3328-usb
+              - rockchip,rk3368-usb
+              - rockchip,rv1108-usb
           - const: rockchip,rk3066-usb
           - const: snps,dwc2
       - const: lantiq,arx100-usb
       - const: lantiq,xrx200-usb
       - items:
-          - const: amlogic,meson8-usb
-          - const: snps,dwc2
-      - items:
-          - const: amlogic,meson8b-usb
-          - const: snps,dwc2
-      - const: amlogic,meson-gxbb-usb
-      - items:
-          - const: amlogic,meson-g12a-usb
+          - enum:
+              - amlogic,meson8-usb
+              - amlogic,meson8b-usb
+              - amlogic,meson-gxbb-usb
+              - amlogic,meson-g12a-usb
+              - intel,socfpga-agilex-hsotg
           - const: snps,dwc2
       - const: amcc,dwc-otg
+      - const: apm,apm82181-dwc-otg
       - const: snps,dwc2
       - const: st,stm32f4x9-fsotg
       - const: st,stm32f4x9-hsotg
       - const: st,stm32f7-hsotg
+      - const: st,stm32mp15-fsotg
+      - items:
+          - const: st,stm32mp15-hsotg
+          - const: snps,dwc2
       - const: samsung,s3c6400-hsotg
+      - const: intel,socfpga-agilex-hsotg
 
   reg:
     maxItems: 1
@@ -73,16 +78,23 @@ properties:
     items:
       - const: otg
 
+  disable-over-current:
+    type: boolean
+    description: whether to disable detection of over-current condition.
+
+  iommus:
+    maxItems: 1
+
   resets:
     items:
-     - description: common reset
-     - description: ecc reset
+      - description: common reset
+      - description: ecc reset
     minItems: 1
 
   reset-names:
     items:
-     - const: dwc2
-     - const: dwc2-ecc
+      - const: dwc2
+      - const: dwc2-ecc
     minItems: 1
 
   phys:
@@ -91,6 +103,9 @@ properties:
   phy-names:
     const: usb2-phy
 
+  power-domains:
+    maxItems: 1
+
   vbus-supply:
     description: reference to the VBUS regulator. Depending on the current mode
       this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
@@ -103,8 +118,21 @@ properties:
   vusb_a-supply:
     description: phandle to voltage regulator of analog section.
 
-  dr_mode:
-    enum: [host, peripheral, otg]
+  usb33d-supply:
+    description: reference to the VBUS and ID sensing comparators supply, in
+      order to perform OTG operation, used on STM32MP15 SoCs.
+
+  dr_mode: true
+
+  otg-rev: true
+
+  hnp-disable: true
+
+  srp-disable: true
+
+  usb-role-switch: true
+
+  role-switch-default-mode: true
 
   g-rx-fifo-size:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -120,12 +148,26 @@ properties:
 
   snps,need-phy-for-wake:
     $ref: /schemas/types.yaml#/definitions/flag
-    description: If present indicates that the phy needs to be left on for remote wakeup during suspend.
+    description: If present indicates that the phy needs to be left on for
+      remote wakeup during suspend.
 
   snps,reset-phy-on-wake:
     $ref: /schemas/types.yaml#/definitions/flag
-    description: If present indicates that we need to reset the PHY when we detect a wakeup.
-                 This is due to a hardware errata.
+    description: If present indicates that we need to reset the PHY when we
+      detect a wakeup. This is due to a hardware errata.
+
+  port:
+    description:
+      Any connector to the data bus of this controller should be modelled
+      using the OF graph bindings specified, if the "usb-role-switch"
+      property is used.
+    $ref: /schemas/graph.yaml#/properties/port
+
+  tpl-support: true
+
+dependencies:
+  port: [ usb-role-switch ]
+  role-switch-default-mode: [ usb-role-switch ]
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/usb/dwc3-cavium.txt b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt
index 710b782ccf65..171df79360ff 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-cavium.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt
@@ -20,7 +20,7 @@ Example device node:
 			    refclk-type-hs = "dlmc_ref_clk0";
 			    power = <0x00000002 0x00000002 0x00000001>;
 			    xhci@1690000000000 {
-				    compatible = "cavium,octeon-7130-xhci", "synopsys,dwc3";
+				    compatible = "cavium,octeon-7130-xhci", "snps,dwc3";
 				    reg = <0x00016900 0x00000000 0x00000010 0x00000000>;
 				    interrupt-parent = <0x00000010>;
 				    interrupts = <0x00000009 0x00000004>;
diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt
index df0e02e1ee43..4aa368447b1e 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-st.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -13,7 +13,7 @@ Required properties:
  - resets	: list of phandle and reset specifier pairs. There should be two entries, one
 		  for the powerdown and softreset lines of the usb3 IP
  - reset-names	: list of reset signal names. Names should be "powerdown" and "softreset"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
  - #address-cells, #size-cells : should be '1' if the device has sub-nodes
@@ -31,13 +31,13 @@ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 Sub-nodes:
 The dwc3 core should be added as subnode to ST DWC3 glue as shown in the
 example below. The DT binding details of dwc3 can be found in:
-Documentation/devicetree/bindings/usb/dwc3.txt
+Documentation/devicetree/bindings/usb/snps,dwc3.yaml
 
 NB: The dr_mode property described in [1] is NOT optional for this driver, as the default value
 is "otg", which isn't supported by this SoC. Valid dr_mode values for dwc3-st are either "host"
 or "device".
 
-[1] Documentation/devicetree/bindings/usb/generic.txt
+[1] Documentation/devicetree/bindings/usb/usb-drd.yaml
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
deleted file mode 100644
index 4aae5b2cef56..000000000000
--- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Xilinx SuperSpeed DWC3 USB SoC controller
-
-Required properties:
-- compatible:	Should contain "xlnx,zynqmp-dwc3"
-- clocks:	A list of phandles for the clocks listed in clock-names
-- clock-names:	Should contain the following:
-  "bus_clk"	 Master/Core clock, have to be >= 125 MHz for SS
-		 operation and >= 60MHz for HS operation
-
-  "ref_clk"	 Clock source to core during PHY power down
-
-Required child node:
-A child node must exist to represent the core DWC3 IP block. The name of
-the node is not important. The content of the node is defined in dwc3.txt.
-
-Example device node:
-
-		usb@0 {
-			#address-cells = <0x2>;
-			#size-cells = <0x1>;
-			compatible = "xlnx,zynqmp-dwc3";
-			clock-names = "bus_clk" "ref_clk";
-			clocks = <&clk125>, <&clk125>;
-			ranges;
-
-			dwc3@fe200000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0xfe200000 0x40000>;
-				interrupts = <0x0 0x41 0x4>;
-				dr_mode = "host";
-			};
-		};
diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
new file mode 100644
index 000000000000..098b73134a1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/dwc3-xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Manish Narani <manish.narani@xilinx.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xlnx,zynqmp-dwc3
+          - xlnx,versal-dwc3
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  power-domains:
+    description: specifies a phandle to PM domain provider node
+    maxItems: 1
+
+  clocks:
+    description:
+      A list of phandle and clock-specifier pairs for the clocks
+      listed in clock-names.
+    items:
+      - description: Master/Core clock, has to be >= 125 MHz
+          for SS operation and >= 60MHz for HS operation.
+      - description: Clock source to core during PHY power down.
+
+  clock-names:
+    items:
+      - const: bus_clk
+      - const: ref_clk
+
+  resets:
+    description:
+      A list of phandles for resets listed in reset-names.
+
+    items:
+      - description: USB core reset
+      - description: USB hibernation reset
+      - description: USB APB reset
+
+  reset-names:
+    items:
+      - const: usb_crst
+      - const: usb_hibrst
+      - const: usb_apbrst
+
+  phys:
+    minItems: 1
+    maxItems: 2
+
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - usb2-phy
+        - usb3-phy
+
+  reset-gpios:
+    description: GPIO used for the reset ulpi-phy
+    maxItems: 1
+
+# Required child node:
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - power-domains
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/phy/phy.h>
+    axi {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@0 {
+            #address-cells = <0x2>;
+            #size-cells = <0x2>;
+            compatible = "xlnx,zynqmp-dwc3";
+            reg = <0x0 0xff9d0000 0x0 0x100>;
+            clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+            clock-names = "bus_clk", "ref_clk";
+            power-domains = <&zynqmp_firmware PD_USB_0>;
+            resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
+                     <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
+                     <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
+            reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
+            phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+            phy-names = "usb3-phy";
+            ranges;
+
+            usb@fe200000 {
+                compatible = "snps,dwc3";
+                reg = <0x0 0xfe200000 0x0 0x40000>;
+                interrupt-names = "host", "otg";
+                interrupts = <0 65 4>, <0 69 4>;
+                dr_mode = "host";
+                dma-coherent;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
deleted file mode 100644
index 66780a47ad85..000000000000
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-synopsys DWC3 CORE
-
-DWC3- USB3 CONTROLLER. Complies to the generic USB binding properties
-      as described in 'usb/generic.txt'
-
-Required properties:
- - compatible: must be "snps,dwc3"
- - reg : Address and length of the register set for the device
- - interrupts: Interrupts used by the dwc3 controller.
- - clock-names: should contain "ref", "bus_early", "suspend"
- - clocks: list of phandle and clock specifier pairs corresponding to
-           entries in the clock-names property.
-
-Exception for clocks:
-  clocks are optional if the parent node (i.e. glue-layer) is compatible to
-  one of the following:
-    "amlogic,meson-axg-dwc3"
-    "amlogic,meson-gxl-dwc3"
-    "cavium,octeon-7130-usb-uctl"
-    "qcom,dwc3"
-    "samsung,exynos5250-dwusb3"
-    "samsung,exynos5433-dwusb3"
-    "samsung,exynos7-dwusb3"
-    "sprd,sc9860-dwc3"
-    "st,stih407-dwc3"
-    "ti,am437x-dwc3"
-    "ti,dwc3"
-    "ti,keystone-dwc3"
-    "rockchip,rk3399-dwc3"
-    "xlnx,zynqmp-dwc3"
-
-Optional properties:
- - usb-phy : array of phandle for the PHY device.  The first element
-   in the array is expected to be a handle to the USB2/HS PHY and
-   the second element is expected to be a handle to the USB3/SS PHY
- - phys: from the *Generic PHY* bindings
- - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy"
-	or "usb3-phy".
- - resets: a single pair of phandle and reset specifier
- - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
- - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
- - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command
-			failure SW work-around for DWC_usb31 version 1.70a-ea06
-			and prior.
- - snps,disable_scramble_quirk: true when SW should disable data scrambling.
-	Only really useful for FPGA builds.
- - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled
- - snps,lpm-nyet-threshold: LPM NYET threshold
- - snps,u2exit_lfps_quirk: set if we want to enable u2exit lfps quirk
- - snps,u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
- - snps,req_p1p2p3_quirk: when set, the core will always request for
-			P1/P2/P3 transition sequence.
- - snps,del_p1p2p3_quirk: when set core will delay P1/P2/P3 until a certain
-			amount of 8B10B errors occur.
- - snps,del_phy_power_chg_quirk: when set core will delay PHY power change
-			from P0 to P1/P2/P3.
- - snps,lfps_filter_quirk: when set core will filter LFPS reception.
- - snps,rx_detect_poll_quirk: when set core will disable a 400us delay to start
-			Polling LFPS after RX.Detect.
- - snps,tx_de_emphasis_quirk: when set core will set Tx de-emphasis value.
- - snps,tx_de_emphasis: the value driven to the PHY is controlled by the
-			LTSSM during USB3 Compliance mode.
- - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy.
- - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy.
- - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG,
-			disabling the suspend signal to the PHY.
- - snps,dis-u1-entry-quirk: set if link entering into U1 needs to be disabled.
- - snps,dis-u2-entry-quirk: set if link entering into U2 needs to be disabled.
- - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection
-			in PHY P3 power state.
- - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists
-			in GUSB2PHYCFG, specify that USB2 PHY doesn't provide
-			a free-running PHY clock.
- - snps,dis-del-phy-power-chg-quirk: when set core will change PHY power
-			from P0 to P1/P2/P3 without delay.
- - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check
-			during HS transmit.
- - snps,dis_metastability_quirk: when set, disable metastability workaround.
-			CAUTION: use only if you are absolutely sure of it.
- - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
-			utmi_l1_suspend_n, false when asserts utmi_sleep_n
- - snps,hird-threshold: HIRD threshold
- - snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for
-   UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3.
- - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ
-	register for post-silicon frame length adjustment when the
-	fladj_30mhz_sdbnd signal is invalid or incorrect.
- - snps,rx-thr-num-pkt-prd: periodic ESS RX packet threshold count - host mode
-			only. Set this and rx-max-burst-prd to a valid,
-			non-zero value 1-16 (DWC_usb31 programming guide
-			section 1.2.4) to enable periodic ESS RX threshold.
- - snps,rx-max-burst-prd: max periodic ESS RX burst size - host mode only. Set
-			this and rx-thr-num-pkt-prd to a valid, non-zero value
-			1-16 (DWC_usb31 programming guide section 1.2.4) to
-			enable periodic ESS RX threshold.
- - snps,tx-thr-num-pkt-prd: periodic ESS TX packet threshold count - host mode
-			only. Set this and tx-max-burst-prd to a valid,
-			non-zero value 1-16 (DWC_usb31 programming guide
-			section 1.2.3) to enable periodic ESS TX threshold.
- - snps,tx-max-burst-prd: max periodic ESS TX burst size - host mode only. Set
-			this and tx-thr-num-pkt-prd to a valid, non-zero value
-			1-16 (DWC_usb31 programming guide section 1.2.3) to
-			enable periodic ESS TX threshold.
-
- - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
- - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0
-			register, undefined length INCR burst type enable and INCRx type.
-			When just one value, which means INCRX burst mode enabled. When
-			more than one value, which means undefined length INCR burst type
-			enabled. The values can be 1, 4, 8, 16, 32, 64, 128 and 256.
-
- - in addition all properties from usb-xhci.txt from the current directory are
-   supported as well
-
-
-This is usually a subnode to DWC3 glue to which it is connected.
-
-dwc3@4a030000 {
-	compatible = "snps,dwc3";
-	reg = <0x4a030000 0xcfff>;
-	interrupts = <0 92 4>
-	usb-phy = <&usb2_phy>, <&usb3,phy>;
-	snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-};
diff --git a/Documentation/devicetree/bindings/usb/ehci-mv.txt b/Documentation/devicetree/bindings/usb/ehci-mv.txt
deleted file mode 100644
index 335589895763..000000000000
--- a/Documentation/devicetree/bindings/usb/ehci-mv.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Marvell PXA/MMP EHCI controller.
-
-Required properties:
-
-- compatible: must be "marvell,pxau2o-ehci"
-- reg: physical base addresses of the controller and length of memory mapped region
-- interrupts: one EHCI controller interrupt should be described here
-- clocks: phandle list of usb clocks
-- clock-names: should be "USBCLK"
-- phys: phandle for the PHY device
-- phy-names: should be "usb"
-
-Example:
-
-	ehci0: usb-ehci@d4208000 {
-		compatible = "marvell,pxau2o-ehci";
-		reg = <0xd4208000 0x200>;
-		interrupts = <44>;
-		clocks = <&soc_clocks MMP2_CLK_USB>;
-		clock-names = "USBCLK";
-		phys = <&usb_otg_phy>;
-		phy-names = "usb";
-	};
diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt
index 065c91d955ad..d6f2bdee20fc 100644
--- a/Documentation/devicetree/bindings/usb/ehci-st.txt
+++ b/Documentation/devicetree/bindings/usb/ehci-st.txt
@@ -17,7 +17,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
  - resets		: phandle + reset specifier pairs to the powerdown and softreset lines
 			  of the USB IP
  - reset-names		: should be "power" and "softreset"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
deleted file mode 100644
index 66c394f9e11f..000000000000
--- a/Documentation/devicetree/bindings/usb/exynos-usb.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-Samsung Exynos SoC USB controller
-
-The USB devices interface with USB controllers on Exynos SOCs.
-The device node has following properties.
-
-EHCI
-Required properties:
- - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
-   EHCI controller in host mode.
- - reg: physical base address of the controller and length of memory mapped
-   region.
- - interrupts: interrupt number to the cpu.
- - clocks: from common clock binding: handle to usb clock.
- - clock-names: from common clock binding: Shall be "usbhost".
- - phys: from the *Generic PHY* bindings; array specifying phy(s) used
-   by the root port.
- - phy-names: from the *Generic PHY* bindings; array of the names for
-   each phy for the root ports, must be a subset of the following:
-   "host", "hsic0", "hsic1".
-
-Optional properties:
- - samsung,vbus-gpio:  if present, specifies the GPIO that
-   needs to be pulled up for the bus to be powered.
-
-Example:
-
-	usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
-		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
-
-		clocks = <&clock 285>;
-		clock-names = "usbhost";
-
-		phys = <&usb2phy 1>;
-		phy-names = "host";
-	};
-
-OHCI
-Required properties:
- - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
-   OHCI companion controller in host mode.
- - reg: physical base address of the controller and length of memory mapped
-   region.
- - interrupts: interrupt number to the cpu.
- - clocks: from common clock binding: handle to usb clock.
- - clock-names: from common clock binding: Shall be "usbhost".
- - phys: from the *Generic PHY* bindings; array specifying phy(s) used
-   by the root port.
- - phy-names: from the *Generic PHY* bindings; array of the names for
-   each phy for the root ports, must be a subset of the following:
-   "host", "hsic0", "hsic1".
-
-Example:
-	usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock 285>;
-		clock-names = "usbhost";
-
-		phys = <&usb2phy 1>;
-		phy-names = "host";
-	};
-
-DWC3
-Required properties:
- - compatible: should be one of the following -
-	       "samsung,exynos5250-dwusb3": for USB 3.0 DWC3 controller on
-					    Exynos5250/5420.
-	       "samsung,exynos5433-dwusb3": for USB 3.0 DWC3 controller on
-					    Exynos5433.
-	       "samsung,exynos7-dwusb3": for USB 3.0 DWC3 controller on Exynos7.
- - #address-cells, #size-cells : should be '1' if the device has sub-nodes
-				 with 'reg' property.
- - ranges: allows valid 1:1 translation between child's address space and
-	   parent's address space
- - clocks: Clock IDs array as required by the controller.
- - clock-names: names of clocks correseponding to IDs in the clock property
- - vdd10-supply: 1.0V powr supply
- - vdd33-supply: 3.0V/3.3V power supply
-
-Sub-nodes:
-The dwc3 core should be added as subnode to Exynos dwc3 glue.
-- dwc3 :
-   The binding details of dwc3 can be found in:
-   Documentation/devicetree/bindings/usb/dwc3.txt
-
-Example:
-	usb@12000000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock 286>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		vdd10-supply = <&ldo11_reg>;
-		vdd33-supply = <&ldo9_reg>;
-
-		dwc3 {
-			compatible = "synopsys,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			usb-phy = <&usb2_phy &usb3_phy>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.txt b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
deleted file mode 100644
index 06a2286e2054..000000000000
--- a/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Faraday FOTG Host controller
-
-This OTG-capable USB host controller is found in Cortina Systems
-Gemini and other SoC products.
-
-Required properties:
-- compatible: should be one of:
-  "faraday,fotg210"
-  "cortina,gemini-usb", "faraday,fotg210"
-- reg: should contain one register range i.e. start and length
-- interrupts: description of the interrupt line
-
-Optional properties:
-- clocks: should contain the IP block clock
-- clock-names: should be "PCLK" for the IP block clock
-
-Required properties for "cortina,gemini-usb" compatible:
-- syscon: a phandle to the system controller to access PHY registers
-
-Optional properties for "cortina,gemini-usb" compatible:
-- cortina,gemini-mini-b: boolean property that indicates that a Mini-B
-  OTG connector is in use
-- wakeup-source: see power/wakeup-source.txt
-
-Example for Gemini:
-
-usb@68000000 {
-	compatible = "cortina,gemini-usb", "faraday,fotg210";
-	reg = <0x68000000 0x1000>;
-	interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&cc 12>;
-	clock-names = "PCLK";
-	syscon = <&syscon>;
-	wakeup-source;
-};
diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml b/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml
new file mode 100644
index 000000000000..c69bbfbcf733
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/faraday,fotg210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FOTG210 HS OTG USB 2.0 controller Bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: usb-drd.yaml#
+  - $ref: usb-hcd.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,fotg210
+      - items:
+          - const: cortina,gemini-usb
+          - const: faraday,fotg210
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: PCLK
+
+  resets:
+    maxItems: 1
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the global Gemini system controller on
+      Gemini systems
+
+  dr_mode: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb2-phy
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+    usb0: usb@68000000 {
+        compatible = "cortina,gemini-usb", "faraday,fotg210";
+        reg = <0x68000000 0x1000>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&syscon GEMINI_RESET_USB0>;
+        clocks = <&syscon GEMINI_CLK_GATE_USB0>;
+        clock-names = "PCLK";
+        syscon = <&syscon>;
+        dr_mode = "host";
+    };
diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
new file mode 100644
index 000000000000..9473f26b0621
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/fcs,fsa4480.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ON Semiconductor Analog Audio Switch
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - fcs,fsa4480
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply:
+    description: power supply (2.7V-5.5V)
+
+  mode-switch:
+    description: Flag the port as possible handle of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the FSA4480 to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c13 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fsa4480@42 {
+          compatible = "fcs,fsa4480";
+          reg = <0x42>;
+
+          interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>;
+
+          vcc-supply = <&vreg_bob>;
+
+          mode-switch;
+          orientation-switch;
+
+          port {
+            fsa4480_ept: endpoint {
+              remote-endpoint = <&typec_controller>;
+            };
+          };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
index ba2e32d500c0..60e4654297af 100644
--- a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
+++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
@@ -9,7 +9,7 @@ Required sub-node:
 - connector : The "usb-c-connector" attached to the FUSB302 IC. The bindings
   of the connector node are specified in:
 
-	Documentation/devicetree/bindings/connector/usb-connector.txt
+	Documentation/devicetree/bindings/connector/usb-connector.yaml
 
 
 Example:
diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
new file mode 100644
index 000000000000..01ab0f922ae8
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP iMX8MP Soc USB Controller
+
+maintainers:
+  - Li Jun <jun.li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8mp-dwc3
+
+  reg:
+    items:
+      - description: Address and length of the register set for HSIO Block Control
+      - description: Address and length of the register set for the wrapper of dwc3 core on the SOC.
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  dma-ranges:
+    description:
+      See section 2.3.9 of the DeviceTree Specification.
+
+  ranges: true
+
+  interrupts:
+    maxItems: 1
+    description: The interrupt that is asserted when a wakeup event is
+      received.
+
+  clocks:
+    description:
+      A list of phandle and clock-specifier pairs for the clocks
+      listed in clock-names.
+    items:
+      - description: system hsio root clock.
+      - description: suspend clock, used for usb wakeup logic.
+
+  clock-names:
+    items:
+      - const: hsio
+      - const: suspend
+
+  fsl,permanently-attached:
+    type: boolean
+    description:
+      Indicates if the device atached to a downstream port is
+      permanently attached.
+
+  fsl,disable-port-power-control:
+    type: boolean
+    description:
+      Indicates whether the host controller implementation includes port
+      power control. Defines Bit 3 in capability register (HCCPARAMS).
+
+  fsl,over-current-active-low:
+    type: boolean
+    description:
+      Over current signal polarity is active low.
+
+  fsl,power-active-low:
+    type: boolean
+    description:
+      Power pad (PWR) polarity is active low.
+
+# Required child node:
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - dma-ranges
+  - ranges
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    usb3_0: usb@32f10100 {
+      compatible = "fsl,imx8mp-dwc3";
+      reg = <0x32f10100 0x8>,
+            <0x381f0000 0x20>;
+      clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+               <&clk IMX8MP_CLK_USB_ROOT>;
+      clock-names = "hsio", "suspend";
+      interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+      ranges;
+
+      usb@38100000 {
+        compatible = "snps,dwc3";
+        reg = <0x38100000 0x10000>;
+        clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+                 <&clk IMX8MP_CLK_USB_CORE_REF>,
+                 <&clk IMX8MP_CLK_USB_ROOT>;
+        clock-names = "bus_early", "ref", "suspend";
+        assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+        assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+        assigned-clock-rates = <500000000>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+        phys = <&usb3_phy0>, <&usb3_phy0>;
+        phy-names = "usb2-phy", "usb3-phy";
+        snps,dis-u2-freeclk-exists-quirk;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 10edd05872ea..c5f629c5bc61 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -4,21 +4,80 @@
 $id: http://devicetree.org/schemas/usb/generic-ehci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: USB EHCI Controller Device Tree Bindings
-
-allOf:
-  - $ref: "usb-hcd.yaml"
+title: USB EHCI Controller
 
 maintainers:
   - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 
+allOf:
+  - $ref: "usb-hcd.yaml"
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: ibm,usb-ehci-440epx
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
 properties:
   compatible:
-    contains:
-      const: generic-ehci
+    oneOf:
+      - items:
+          - enum:
+              - allwinner,sun4i-a10-ehci
+              - allwinner,sun50i-a64-ehci
+              - allwinner,sun50i-h6-ehci
+              - allwinner,sun5i-a13-ehci
+              - allwinner,sun6i-a31-ehci
+              - allwinner,sun7i-a20-ehci
+              - allwinner,sun8i-a23-ehci
+              - allwinner,sun8i-a83t-ehci
+              - allwinner,sun8i-h3-ehci
+              - allwinner,sun8i-r40-ehci
+              - allwinner,sun9i-a80-ehci
+              - allwinner,sun20i-d1-ehci
+              - aspeed,ast2400-ehci
+              - aspeed,ast2500-ehci
+              - aspeed,ast2600-ehci
+              - brcm,bcm3384-ehci
+              - brcm,bcm63268-ehci
+              - brcm,bcm6328-ehci
+              - brcm,bcm6358-ehci
+              - brcm,bcm6362-ehci
+              - brcm,bcm6368-ehci
+              - brcm,bcm7125-ehci
+              - brcm,bcm7346-ehci
+              - brcm,bcm7358-ehci
+              - brcm,bcm7360-ehci
+              - brcm,bcm7362-ehci
+              - brcm,bcm7420-ehci
+              - brcm,bcm7425-ehci
+              - brcm,bcm7435-ehci
+              - hpe,gxp-ehci
+              - ibm,476gtr-ehci
+              - nxp,lpc1850-ehci
+              - qca,ar7100-ehci
+              - snps,hsdk-v1.0-ehci
+              - socionext,uniphier-ehci
+          - const: generic-ehci
+      - items:
+          - enum:
+              - cavium,octeon-6335-ehci
+              - ibm,usb-ehci-440epx
+              - ibm,usb-ehci-460ex
+              - nintendo,hollywood-usb-ehci
+              - st,spear600-ehci
+          - const: usb-ehci
+      - enum:
+          - generic-ehci
+          - usb-ehci
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   interrupts:
     maxItems: 1
@@ -36,6 +95,9 @@ properties:
         - if a USB DRD channel: first clock should be host and second
           one should be peripheral
 
+  power-domains:
+    maxItems: 1
+
   big-endian:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -63,31 +125,41 @@ properties:
     description:
       Set this flag to force EHCI reset after resume.
 
-  companion:
-    $ref: /schemas/types.yaml#/definitions/phandle
+  spurious-oc:
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
-     Phandle of a companion.
+      Set this flag to indicate that the hardware sometimes turns on
+      the OC bit when an over-current isn't actually present.
 
   phys:
-    description: PHY specifier for the USB PHY
+    minItems: 1
+    maxItems: 3
 
   phy-names:
     const: usb
 
+  iommus:
+    maxItems: 1
+
+  dr_mode:
+    enum:
+      - host
+      - otg
+
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     usb@e0000300 {
-        compatible = "ibm,usb-ehci-440epx", "generic-ehci";
+        compatible = "ibm,usb-ehci-440epx", "usb-ehci";
         interrupt-parent = <&UIC0>;
         interrupts = <0x1a 4>;
-        reg = <0 0xe0000300 90 0 0xe0000390 70>;
+        reg = <0xe0000300 90>, <0xe0000390 70>;
         big-endian;
     };
 
diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
index bcffec1f1341..f838f78d6164 100644
--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/generic-ohci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: USB OHCI Controller Device Tree Bindings
+title: USB OHCI Controller
 
 allOf:
   - $ref: "usb-hcd.yaml"
@@ -14,8 +14,41 @@ maintainers:
 
 properties:
   compatible:
-    contains:
-      const: generic-ohci
+    oneOf:
+      - items:
+          - enum:
+              - allwinner,sun4i-a10-ohci
+              - allwinner,sun50i-a64-ohci
+              - allwinner,sun50i-h6-ohci
+              - allwinner,sun5i-a13-ohci
+              - allwinner,sun6i-a31-ohci
+              - allwinner,sun7i-a20-ohci
+              - allwinner,sun8i-a23-ohci
+              - allwinner,sun8i-a83t-ohci
+              - allwinner,sun8i-h3-ohci
+              - allwinner,sun8i-r40-ohci
+              - allwinner,sun9i-a80-ohci
+              - allwinner,sun20i-d1-ohci
+              - brcm,bcm3384-ohci
+              - brcm,bcm63268-ohci
+              - brcm,bcm6328-ohci
+              - brcm,bcm6358-ohci
+              - brcm,bcm6362-ohci
+              - brcm,bcm6368-ohci
+              - brcm,bcm7125-ohci
+              - brcm,bcm7346-ohci
+              - brcm,bcm7358-ohci
+              - brcm,bcm7360-ohci
+              - brcm,bcm7362-ohci
+              - brcm,bcm7420-ohci
+              - brcm,bcm7425-ohci
+              - brcm,bcm7435-ohci
+              - hpe,gxp-ohci
+              - ibm,476gtr-ohci
+              - ingenic,jz4740-ohci
+              - snps,hsdk-v1.0-ohci
+          - const: generic-ohci
+      - const: generic-ohci
 
   reg:
     maxItems: 1
@@ -36,6 +69,9 @@ properties:
         - if a USB DRD channel: first clock should be host and second
           one should be peripheral
 
+  power-domains:
+    maxItems: 1
+
   big-endian:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -68,11 +104,20 @@ properties:
       Overrides the detected port count
 
   phys:
-    description: PHY specifier for the USB PHY
+    minItems: 1
+    maxItems: 3
 
   phy-names:
     const: usb
 
+  iommus:
+    maxItems: 1
+
+  dr_mode:
+    enum:
+      - host
+      - otg
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/usb/generic-xhci.yaml b/Documentation/devicetree/bindings/usb/generic-xhci.yaml
new file mode 100644
index 000000000000..db841589fc33
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/generic-xhci.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/generic-xhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB xHCI Controller
+
+maintainers:
+  - Mathias Nyman <mathias.nyman@intel.com>
+
+allOf:
+  - $ref: "usb-xhci.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - description: Generic xHCI device
+        const: generic-xhci
+      - description: Armada 37xx/375/38x/8k SoCs
+        items:
+          - enum:
+              - marvell,armada3700-xhci
+              - marvell,armada-375-xhci
+              - marvell,armada-380-xhci
+              - marvell,armada-8k-xhci
+          - const: generic-xhci
+      - description: Broadcom STB SoCs with xHCI
+        enum:
+          - brcm,xhci-brcm-v2
+          - brcm,bcm7445-xhci
+      - description: Generic xHCI device
+        const: xhci-platform
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: reg
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    usb@f0931000 {
+      compatible = "generic-xhci";
+      reg = <0xf0931000 0x8c8>;
+      interrupts = <0x0 0x4e 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
deleted file mode 100644
index e6790d2a4da9..000000000000
--- a/Documentation/devicetree/bindings/usb/generic.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Generic USB Properties
-
-Optional properties:
- - maximum-speed: tells USB controllers we want to work up to a certain
-			speed. Valid arguments are "super-speed-plus",
-			"super-speed", "high-speed", "full-speed" and
-			"low-speed". In case this isn't passed via DT, USB
-			controllers should default to their maximum HW
-			capability.
- - dr_mode: tells Dual-Role USB controllers that we want to work on a
-			particular mode. Valid arguments are "host",
-			"peripheral" and "otg". In case this attribute isn't
-			passed via DT, USB DRD controllers should default to
-			OTG.
- - phy_type: tells USB controllers that we want to configure the core to support
-			a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is
-			selected. Valid arguments are "utmi" and "utmi_wide".
-			In case this isn't passed via DT, USB controllers should
-			default to HW capability.
- - otg-rev: tells usb driver the release number of the OTG and EH supplement
-			with which the device and its descriptors are compliant,
-			in binary-coded decimal (i.e. 2.0 is 0200H). This
-			property is used if any real OTG features(HNP/SRP/ADP)
-			is enabled, if ADP is required, otg-rev should be
-			0x0200 or above.
- - companion: phandle of a companion
- - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP
-			is the basic function of real OTG except you want it
-			to be a srp-capable only B device.
- - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is
-			optional for OTG device.
- - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is
-			optional for OTG device.
- - usb-role-switch: boolean, indicates that the device is capable of assigning
-			the USB data role (USB host or USB device) for a given
-			USB connector, such as Type-C, Type-B(micro).
-			see connector/usb-connector.txt.
-
-This is an attribute to a USB controller such as:
-
-dwc3@4a030000 {
-	compatible = "synopsys,dwc3";
-	reg = <0x4a030000 0xcfff>;
-	interrupts = <0 92 4>
-	usb-phy = <&usb2_phy>, <&usb3,phy>;
-	maximum-speed = "super-speed";
-	dr_mode = "otg";
-	phy_type = "utmi_wide";
-	otg-rev = <0x0200>;
-	adp-disable;
-};
diff --git a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt b/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
deleted file mode 100644
index 16808721f3ff..000000000000
--- a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Ingenic JZ4740 MUSB driver
-
-Required properties:
-
-- compatible: Must be "ingenic,jz4740-musb"
-- reg: Address range of the UDC register set
-- interrupts: IRQ number related to the UDC hardware
-- interrupt-names: must be "mc"
-- clocks: phandle to the "udc" clock
-- clock-names: must be "udc"
-- phys: phandle to the USB PHY
-
-Example:
-
-usb_phy: usb-phy@0 {
-	compatible = "usb-nop-xceiv";
-	#phy-cells = <0>;
-};
-
-udc: usb@13040000 {
-	compatible = "ingenic,jz4740-musb";
-	reg = <0x13040000 0x10000>;
-
-	interrupt-parent = <&intc>;
-	interrupts = <24>;
-	interrupt-names = "mc";
-
-	clocks = <&cgu JZ4740_CLK_UDC>;
-	clock-names = "udc";
-
-	phys = <&usb_phy>;
-};
diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
new file mode 100644
index 000000000000..59212358fcce
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ingenic,musb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx USB IP DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: '^usb@.*'
+
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4770-musb
+          - ingenic,jz4740-musb
+      - items:
+          - const: ingenic,jz4725b-musb
+          - const: ingenic,jz4740-musb
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: udc
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: mc
+
+  phys:
+    maxItems: 1
+
+  usb-role-switch:
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - phys
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+    usb_phy: usb-phy {
+      compatible = "usb-nop-xceiv";
+      #phy-cells = <0>;
+    };
+
+    udc: usb@13040000 {
+      compatible = "ingenic,jz4740-musb";
+      reg = <0x13040000 0x10000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <24>;
+      interrupt-names = "mc";
+
+      clocks = <&cgu JZ4740_CLK_UDC>;
+      clock-names = "udc";
+
+      phys = <&usb_phy>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
new file mode 100644
index 000000000000..d3511f48cd55
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/intel,keembay-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay DWC3 USB controller
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-dwc3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: async_master
+      - const: ref
+      - const: alt_ref
+      - const: suspend
+
+  ranges: true
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+# Required child node:
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #define KEEM_BAY_A53_AUX_USB
+    #define KEEM_BAY_A53_AUX_USB_REF
+    #define KEEM_BAY_A53_AUX_USB_ALT_REF
+    #define KEEM_BAY_A53_AUX_USB_SUSPEND
+
+    usb {
+          compatible = "intel,keembay-dwc3";
+          clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>,
+                   <&scmi_clk KEEM_BAY_A53_AUX_USB_REF>,
+                   <&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>,
+                   <&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>;
+          clock-names = "async_master", "ref", "alt_ref", "suspend";
+          ranges;
+          #address-cells = <1>;
+          #size-cells = <1>;
+
+          usb@34000000 {
+                compatible = "snps,dwc3";
+                reg = <0x34000000 0x10000>;
+                interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+                dr_mode = "peripheral";
+          };
+    };
diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
deleted file mode 100644
index 77df82e36138..000000000000
--- a/Documentation/devicetree/bindings/usb/keystone-usb.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-TI Keystone Soc USB Controller
-
-DWC3 GLUE
-
-Required properties:
- - compatible: should be
-		"ti,keystone-dwc3" for Keystone 2 SoCs
-		"ti,am654-dwc3" for AM654 SoC
- - #address-cells, #size-cells : should be '1' if the device has sub-nodes
-   with 'reg' property.
- - reg : Address and length of the register set for the USB subsystem on
-   the SOC.
- - interrupts : The irq number of this device that is used to interrupt the
-   MPU.
- - ranges: allows valid 1:1 translation between child's address space and
-   parent's address space.
-
-SoC-specific Required Properties:
-The following are mandatory properties for Keystone 2 66AK2HK, 66AK2L and 66AK2E
-SoCs only:
-
-- clocks:		Clock ID for USB functional clock.
-- clock-names:		Must be "usb".
-
-
-The following are mandatory properties for 66AK2G and AM654:
-
-- power-domains:	Should contain a phandle to a PM domain provider node
-			and an args specifier containing the USB device id
-			value. This property is as per the binding,
-			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
-
-Sub-nodes:
-The dwc3 core should be added as subnode to Keystone DWC3 glue.
-- dwc3 :
-   The binding details of dwc3 can be found in:
-   Documentation/devicetree/bindings/usb/dwc3.txt
-
-Example:
-	usb: usb@2680000 {
-		compatible = "ti,keystone-dwc3";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x2680000 0x10000>;
-		clocks = <&clkusb>;
-		clock-names = "usb";
-		interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
-		ranges;
-
-		dwc3@2690000 {
-			compatible = "synopsys,dwc3";
-			reg = <0x2690000 0x70000>;
-			interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
-			usb-phy = <&usb_phy>, <&usb_phy>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
new file mode 100644
index 000000000000..3cf93dd45eb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/marvell,pxau2o-ehci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA/MMP EHCI bindings
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+allOf:
+  - $ref: usb-hcd.yaml#
+
+properties:
+  compatible:
+    const: marvell,pxau2o-ehci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: USBCLK
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2.h>
+    usb@d4208000 {
+        compatible = "marvell,pxau2o-ehci";
+        reg = <0xd4208000 0x200>;
+        interrupts = <44>;
+        clocks = <&soc_clocks MMP2_CLK_USB>;
+        clock-names = "USBCLK";
+        phys = <&usb_otg_phy>;
+        phy-names = "usb";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml
new file mode 100644
index 000000000000..93a19eda610b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/maxim,max33359.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Maxim TCPCI Type-C PD controller DT bindings
+
+maintainers:
+  - Badhri Jagan Sridharan <badhri@google.com>
+
+description: Maxim TCPCI Type-C PD controller
+
+properties:
+  compatible:
+    enum:
+      - maxim,max33359
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        maxtcpc@25 {
+            compatible = "maxim,max33359";
+            reg = <0x25>;
+            interrupt-parent = <&gpa8>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+            connector {
+                compatible = "usb-c-connector";
+                label = "USB-C";
+                data-role = "dual";
+                power-role = "dual";
+                try-power-role = "sink";
+                self-powered;
+                op-sink-microwatt = <2600000>;
+                new-source-frs-typec-current = <FRS_5V_1P5A>;
+                source-pdos = <PDO_FIXED(5000, 900,
+                                         PDO_FIXED_SUSPEND |
+                                         PDO_FIXED_USB_COMM |
+                                         PDO_FIXED_DATA_SWAP |
+                                         PDO_FIXED_DUAL_ROLE)>;
+                sink-pdos = <PDO_FIXED(5000, 3000,
+                                       PDO_FIXED_USB_COMM |
+                                       PDO_FIXED_DATA_SWAP |
+                                       PDO_FIXED_DUAL_ROLE)
+                                       PDO_FIXED(9000, 2000, 0)>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml
new file mode 100644
index 000000000000..1d893d3d3432
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/maxim,max3420-udc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAXIM MAX3420/1 USB Peripheral Controller
+
+maintainers:
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+description: |
+  The controller provices USB2.0 compliant FullSpeed peripheral
+  implementation over the SPI interface.
+
+  Specifications about the part can be found at:
+    http://datasheets.maximintegrated.com/en/ds/MAX3420E.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max3420-udc
+      - maxim,max3421-udc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: usb irq from max3420
+      - description: vbus detection irq
+    minItems: 1
+
+  interrupt-names:
+    items:
+      - const: udc
+      - const: vbus
+    minItems: 1
+
+  spi-max-frequency:
+    maximum: 26000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+      #include <dt-bindings/interrupt-controller/irq.h>
+      spi0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            udc@0 {
+                  compatible = "maxim,max3420-udc";
+                  reg = <0>;
+                  interrupt-parent = <&gpio>;
+                  interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>;
+                  interrupt-names = "udc", "vbus";
+                  spi-max-frequency = <12500000>;
+            };
+      };
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
new file mode 100644
index 000000000000..8db1f8b597c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/mediatek,mt6360-tcpc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Mediatek MT6360 Type-C Port Switch and Power Delivery controller DT bindings
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  Mediatek MT6360 is a multi-functional device. It integrates charger, ADC, flash, RGB indicators,
+  regulators (BUCKs/LDOs), and TypeC Port Switch with Power Delivery controller.
+  This document only describes MT6360 Type-C Port Switch and Power Delivery controller.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6360-tcpc
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: PD_IRQB
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      mt6360@34 {
+        compatible = "mediatek,mt6360";
+        reg = <0x34>;
+        interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "IRQB";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        tcpc {
+          compatible = "mediatek,mt6360-tcpc";
+          interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+          interrupt-names = "PD_IRQB";
+
+          connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            data-role = "dual";
+            power-role = "dual";
+            try-power-role = "sink";
+            source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            op-sink-microwatt = <10000000>;
+
+            ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                reg = <0>;
+                endpoint {
+                  remote-endpoint = <&usb_hs>;
+                };
+              };
+              port@1 {
+                reg = <1>;
+                endpoint {
+                  remote-endpoint = <&usb_ss>;
+                };
+              };
+              port@2 {
+                reg = <2>;
+                endpoint {
+                  remote-endpoint = <&dp_aux>;
+                };
+              };
+            };
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
new file mode 100644
index 000000000000..72f56cc88457
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/mediatek,mt6370-tcpc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediatTek MT6370 Type-C Port Switch and Power Delivery controller
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  MediaTek MT6370 is a multi-functional device.
+  It integrates charger, ADC, flash, RGB indicators,
+  regulators (DSV/VIBLDO), and TypeC Port Switch with Power Delivery controller.
+  This document only describes MT6370 Type-C Port Switch and
+  Power Delivery controller.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6370-tcpc
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
deleted file mode 100644
index 42d8814f903a..000000000000
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
+++ /dev/null
@@ -1,121 +0,0 @@
-MT8173 xHCI
-
-The device node for Mediatek SOC USB3.0 host controller
-
-There are two scenarios: the first one only supports xHCI driver;
-the second one supports dual-role mode, and the host is based on xHCI
-driver. Take account of backward compatibility, we divide bindings
-into two parts.
-
-1st: only supports xHCI driver
-------------------------------------------------------------------------
-
-Required properties:
- - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci",
-	soc-model is the name of SoC, such as mt8173, mt2712 etc, when using
-	"mediatek,mtk-xhci" compatible string, you need SoC specific ones in
-	addition, one of:
-	- "mediatek,mt8173-xhci"
- - reg : specifies physical base address and size of the registers
- - reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control
- - interrupts : interrupt used by the controller
- - power-domains : a phandle to USB power domain node to control USB's
-	mtcmos
- - vusb33-supply : regulator of USB avdd3.3v
-
- - clocks : a list of phandle + clock-specifier pairs, one for each
-	entry in clock-names
- - clock-names : must contain
-	"sys_ck": controller clock used by normal mode,
-	the following ones are optional:
-	"ref_ck": reference clock used by low power mode etc,
-	"mcu_ck": mcu_bus clock for register access,
-	"dma_ck": dma_bus clock for data transfer by DMA,
-	"xhci_ck": controller clock
-
- - phys : see usb-hcd.yaml in the current directory
-
-Optional properties:
- - wakeup-source : enable USB remote wakeup;
- - mediatek,syscon-wakeup : phandle to syscon used to access the register
-	of the USB wakeup glue layer between xHCI and SPM; it depends on
-	"wakeup-source", and has two arguments:
-	- the first one : register base address of the glue layer in syscon;
-	- the second one : hardware version of the glue layer
-		- 1 : used by mt8173 etc
-		- 2 : used by mt2712 etc
- - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
-	bit1 for u3port1, ... etc;
- - vbus-supply : reference to the VBUS regulator;
- - usb3-lpm-capable : supports USB3.0 LPM
- - pinctrl-names : a pinctrl state named "default" must be defined
- - pinctrl-0 : pin control group
-	See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- - imod-interval-ns: default interrupt moderation interval is 5000ns
-
-additionally the properties from usb-hcd.yaml (in the current directory) are
-supported.
-
-Example:
-usb30: usb@11270000 {
-	compatible = "mediatek,mt8173-xhci";
-	reg = <0 0x11270000 0 0x1000>,
-	      <0 0x11280700 0 0x0100>;
-	reg-names = "mac", "ippc";
-	interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
-	clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
-		 <&pericfg CLK_PERI_USB0>,
-		 <&pericfg CLK_PERI_USB1>;
-	clock-names = "sys_ck", "ref_ck";
-	phys = <&phy_port0 PHY_TYPE_USB3>,
-	       <&phy_port1 PHY_TYPE_USB2>;
-	vusb33-supply = <&mt6397_vusb_reg>;
-	vbus-supply = <&usb_p1_vbus>;
-	usb3-lpm-capable;
-	mediatek,syscon-wakeup = <&pericfg 0x400 1>;
-	wakeup-source;
-	imod-interval-ns = <10000>;
-};
-
-2nd: dual-role mode with xHCI driver
-------------------------------------------------------------------------
-
-In the case, xhci is added as subnode to mtu3. An example and the DT binding
-details of mtu3 can be found in:
-Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
-
-Required properties:
- - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci",
-	soc-model is the name of SoC, such as mt8173, mt2712 etc, when using
-	"mediatek,mtk-xhci" compatible string, you need SoC specific ones in
-	addition, one of:
-	- "mediatek,mt8173-xhci"
- - reg : specifies physical base address and size of the registers
- - reg-names: should be "mac" for xHCI MAC
- - interrupts : interrupt used by the host controller
- - power-domains : a phandle to USB power domain node to control USB's
-	mtcmos
- - vusb33-supply : regulator of USB avdd3.3v
-
- - clocks : a list of phandle + clock-specifier pairs, one for each
-	entry in clock-names
- - clock-names : must contain "sys_ck", and the following ones are optional:
-	"ref_ck", "mcu_ck" and "dma_ck", "xhci_ck"
-
-Optional properties:
- - vbus-supply : reference to the VBUS regulator;
- - usb3-lpm-capable : supports USB3.0 LPM
-
-Example:
-usb30: usb@11270000 {
-	compatible = "mediatek,mt8173-xhci";
-	reg = <0 0x11270000 0 0x1000>;
-	reg-names = "mac";
-	interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
-	clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
-	clock-names = "sys_ck", "ref_ck";
-	vusb33-supply = <&mt6397_vusb_reg>;
-	usb3-lpm-capable;
-};
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
new file mode 100644
index 000000000000..939623867a64
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/mediatek,mtk-xhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek USB3 xHCI
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+allOf:
+  - $ref: "usb-xhci.yaml"
+
+description: |
+  There are two scenarios:
+  case 1: only supports xHCI driver;
+  case 2: supports dual-role mode, and the host is based on xHCI driver.
+
+properties:
+  # common properties for both case 1 and case 2
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2701-xhci
+          - mediatek,mt2712-xhci
+          - mediatek,mt7622-xhci
+          - mediatek,mt7623-xhci
+          - mediatek,mt7629-xhci
+          - mediatek,mt8173-xhci
+          - mediatek,mt8183-xhci
+          - mediatek,mt8186-xhci
+          - mediatek,mt8188-xhci
+          - mediatek,mt8192-xhci
+          - mediatek,mt8195-xhci
+      - const: mediatek,mtk-xhci
+
+  reg:
+    minItems: 1
+    items:
+      - description: the registers of xHCI MAC
+      - description: the registers of IP Port Control
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mac
+      - const: ippc  # optional, only needed for case 1.
+
+  interrupts:
+    description:
+      use "interrupts-extended" when the interrupts are connected to the
+      separate interrupt controllers
+    minItems: 1
+    items:
+      - description: xHCI host controller interrupt
+      - description: optional, wakeup interrupt used to support runtime PM
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: host
+      - const: wakeup
+
+  power-domains:
+    description: A phandle to USB power domain node to control USB's MTCMOS
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Controller clock used by normal mode
+      - description: Reference clock used by low power mode etc
+      - description: Mcu bus clock for register access
+      - description: DMA bus clock for data transfer
+      - description: controller clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sys_ck  # required, the following ones are optional
+      - const: ref_ck
+      - const: mcu_ck
+      - const: dma_ck
+      - const: xhci_ck
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 5
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 5
+
+  phys:
+    description:
+      List of all PHYs used on this HCD, it's better to keep PHYs in order
+      as the hardware layout
+    minItems: 1
+    items:
+      - description: USB2/HS PHY    # required, others are optional
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+
+  vusb33-supply:
+    description: Regulator of USB AVDD3.3v
+
+  vbus-supply:
+    description: Regulator of USB VBUS5v
+
+  resets:
+    maxItems: 1
+
+  usb3-lpm-capable: true
+
+  usb2-lpm-disable: true
+
+  imod-interval-ns:
+    description:
+      Interrupt moderation interval value, it is 8 times as much as that
+      defined in the xHCI spec on MTK's controller.
+    default: 5000
+
+  # the following properties are only used for case 1
+  wakeup-source:
+    description: enable USB remote wakeup, see power/wakeup-source.txt
+    type: boolean
+
+  mediatek,syscon-wakeup:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      A phandle to syscon used to access the register of the USB wakeup glue
+      layer between xHCI and SPM, the field should always be 3 cells long.
+    items:
+      items:
+        - description:
+            The first cell represents a phandle to syscon
+        - description:
+            The second cell represents the register base address of the glue
+            layer in syscon
+        - description: |
+            The third cell represents the hardware version of the glue layer,
+            1 - used by mt8173 etc, revision 1 without following IPM rule;
+            2 - used by mt2712 etc, revision 2 following IPM rule;
+            101 - used by mt8183, specific 1.01;
+            102 - used by mt8192, specific 1.02;
+            103 - used by mt8195, IP0, specific 1.03;
+            104 - used by mt8195, IP1, specific 1.04;
+            105 - used by mt8195, IP2, specific 1.05;
+            106 - used by mt8195, IP3, specific 1.06;
+          enum: [1, 2, 101, 102, 103, 104, 105, 106]
+
+  mediatek,u3p-dis-msk:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mask to disable u3ports, bit0 for u3port0,
+      bit1 for u3port1, ... etc
+
+  mediatek,u2p-dis-msk:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mask to disable u2ports, bit0 for u2port0,
+      bit1 for u2port1, ... etc
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "@[0-9a-f]{1}$":
+    type: object
+    description: The hard wired USB devices.
+
+dependencies:
+  wakeup-source: [ 'mediatek,syscon-wakeup' ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    usb@11270000 {
+        compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
+        reg = <0x11270000 0x1000>, <0x11280700 0x0100>;
+        reg-names = "mac", "ippc";
+        interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+        power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+        clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+        clock-names = "sys_ck", "ref_ck";
+        phys = <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>;
+        vusb33-supply = <&mt6397_vusb_reg>;
+        vbus-supply = <&usb_p1_vbus>;
+        imod-interval-ns = <10000>;
+        mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+        wakeup-source;
+        usb3-lpm-capable;
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
deleted file mode 100644
index e0ae6096f7ac..000000000000
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-The device node for Mediatek USB3.0 DRD controller
-
-Required properties:
- - compatible : should be "mediatek,<soc-model>-mtu3", "mediatek,mtu3",
-	soc-model is the name of SoC, such as mt8173, mt2712 etc,
-	when using "mediatek,mtu3" compatible string, you need SoC specific
-	ones in addition, one of:
-	- "mediatek,mt8173-mtu3"
- - reg : specifies physical base address and size of the registers
- - reg-names: should be "mac" for device IP and "ippc" for IP port control
- - interrupts : interrupt used by the device IP
- - power-domains : a phandle to USB power domain node to control USB's
-	mtcmos
- - vusb33-supply : regulator of USB avdd3.3v
- - clocks : a list of phandle + clock-specifier pairs, one for each
-	entry in clock-names
- - clock-names : must contain "sys_ck" for clock of controller,
-	the following clocks are optional:
-	"ref_ck", "mcu_ck" and "dma_ck";
- - phys : see usb-hcd.yaml in the current directory
- - dr_mode : should be one of "host", "peripheral" or "otg",
-	refer to usb/generic.txt
-
-Optional properties:
- - #address-cells, #size-cells : should be '2' if the device has sub-nodes
-	with 'reg' property
- - ranges : allows valid 1:1 translation between child's address space and
-	parent's address space
- - extcon : external connector for vbus and idpin changes detection, needed
-	when supports dual-role mode.
-	it's considered valid for compatibility reasons, not allowed for
-	new bindings, and use "usb-role-switch" property instead.
- - vbus-supply : reference to the VBUS regulator, needed when supports
-	dual-role mode.
-	it's considered valid for compatibility reasons, not allowed for
-	new bindings, and put into a usb-connector node.
-	see connector/usb-connector.txt.
- - pinctrl-names : a pinctrl state named "default" is optional, and need be
-	defined if auto drd switch is enabled, that means the property dr_mode
-	is set as "otg", and meanwhile the property "mediatek,enable-manual-drd"
-	is not set.
- - pinctrl-0 : pin control group
-	See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
- - maximum-speed : valid arguments are "super-speed", "high-speed" and
-	"full-speed"; refer to usb/generic.txt
- - usb-role-switch : use USB Role Switch to support dual-role switch, but
-	not extcon; see usb/generic.txt.
- - enable-manual-drd : supports manual dual-role switch via debugfs; usually
-	used when receptacle is TYPE-A and also wants to support dual-role
-	mode.
- - wakeup-source: enable USB remote wakeup of host mode.
- - mediatek,syscon-wakeup : phandle to syscon used to access the register
-	of the USB wakeup glue layer between SSUSB and SPM; it depends on
-	"wakeup-source", and has two arguments:
-	- the first one : register base address of the glue layer in syscon;
-	- the second one : hardware version of the glue layer
-		- 1 : used by mt8173 etc
-		- 2 : used by mt2712 etc
- - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
-	bit1 for u3port1, ... etc;
-
-additionally the properties from usb-hcd.yaml (in the current directory) are
-supported.
-
-Sub-nodes:
-The xhci should be added as subnode to mtu3 as shown in the following example
-if host mode is enabled. The DT binding details of xhci can be found in:
-Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
-
-The port would be added as subnode if use "usb-role-switch" property.
-	see graph.txt
-
-Example:
-ssusb: usb@11271000 {
-	compatible = "mediatek,mt8173-mtu3";
-	reg = <0 0x11271000 0 0x3000>,
-	      <0 0x11280700 0 0x0100>;
-	reg-names = "mac", "ippc";
-	interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>;
-	phys = <&phy_port0 PHY_TYPE_USB3>,
-	       <&phy_port1 PHY_TYPE_USB2>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
-	clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
-		 <&pericfg CLK_PERI_USB0>,
-		 <&pericfg CLK_PERI_USB1>;
-	clock-names = "sys_ck", "ref_ck";
-	vusb33-supply = <&mt6397_vusb_reg>;
-	vbus-supply = <&usb_p0_vbus>;
-	extcon = <&extcon_usb>;
-	dr_mode = "otg";
-	wakeup-source;
-	mediatek,syscon-wakeup = <&pericfg 0x400 1>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-
-	usb_host: xhci@11270000 {
-		compatible = "mediatek,mt8173-xhci";
-		reg = <0 0x11270000 0 0x1000>;
-		reg-names = "mac";
-		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
-		clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
-		clock-names = "sys_ck", "ref_ck";
-		vusb33-supply = <&mt6397_vusb_reg>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
new file mode 100644
index 000000000000..80750b0f458a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
@@ -0,0 +1,333 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/mediatek,mtu3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek USB3 DRD Controller
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+allOf:
+  - $ref: "usb-drd.yaml"
+
+description: |
+  The DRD controller has a glue layer IPPC (IP Port Control), and its host is
+  based on xHCI.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2712-mtu3
+          - mediatek,mt8173-mtu3
+          - mediatek,mt8183-mtu3
+          - mediatek,mt8188-mtu3
+          - mediatek,mt8192-mtu3
+          - mediatek,mt8195-mtu3
+      - const: mediatek,mtu3
+
+  reg:
+    items:
+      - description: the registers of device MAC
+      - description: the registers of IP Port Control
+
+  reg-names:
+    items:
+      - const: mac
+      - const: ippc
+
+  interrupts:
+    description:
+      use "interrupts-extended" when the interrupts are connected to the
+      separate interrupt controllers
+    minItems: 1
+    items:
+      - description: SSUSB device controller interrupt
+      - description: optional, wakeup interrupt used to support runtime PM
+
+  interrupt-names:
+    items:
+      - const: device
+      - const: wakeup
+
+  power-domains:
+    description: A phandle to USB power domain node to control USB's MTCMOS
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Controller clock used by normal mode
+      - description: Reference clock used by low power mode etc
+      - description: Mcu bus clock for register access
+      - description: DMA bus clock for data transfer
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sys_ck  # required, others are optional
+      - const: ref_ck
+      - const: mcu_ck
+      - const: dma_ck
+
+  phys:
+    description:
+      List of all the USB PHYs used, it's better to keep the sequence
+      as the hardware layout.
+    minItems: 1
+    items:
+      - description: USB2/HS PHY    # required, others are optional
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY    # the following for backward compatible
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+
+  vusb33-supply:
+    description: Regulator of USB AVDD3.3v
+
+  vbus-supply:
+    deprecated: true
+    description: |
+      Regulator of USB VBUS5v, needed when supports dual-role mode.
+      Particularly, if use an output GPIO to control a VBUS regulator, should
+      model it as a regulator. See bindings/regulator/fixed-regulator.yaml
+      It's considered valid for compatibility reasons, not allowed for
+      new bindings, and put into a usb-connector node.
+
+  dr_mode:
+    enum: [host, peripheral, otg]
+    default: otg
+
+  maximum-speed:
+    enum: [super-speed-plus, super-speed, high-speed, full-speed]
+
+  resets:
+    maxItems: 1
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  ranges: true
+
+  extcon:
+    deprecated: true
+    description: |
+      Phandle to the extcon device detecting the IDDIG state, needed
+      when supports dual-role mode.
+      It's considered valid for compatibility reasons, not allowed for
+      new bindings, and use "usb-role-switch" property instead.
+
+  usb-role-switch:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Support role switch.
+    type: boolean
+
+  role-switch-default-mode:
+    enum: [host, peripheral]
+    default: host
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    description:
+      Connector for dual role switch, especially for "gpio-usb-b-connector"
+    type: object
+
+  port:
+    description:
+      Any connector to the data bus of this controller should be modelled
+      using the OF graph bindings specified, if the "usb-role-switch"
+      property is used. See graph.txt
+    $ref: /schemas/graph.yaml#/properties/port
+
+  enable-manual-drd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      supports manual dual-role switch via debugfs; usually used when
+      receptacle is TYPE-A and also wants to support dual-role mode.
+    type: boolean
+
+  wakeup-source:
+    description: enable USB remote wakeup, see power/wakeup-source.txt
+    type: boolean
+
+  mediatek,syscon-wakeup:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      A phandle to syscon used to access the register of the USB wakeup glue
+      layer between xHCI and SPM, the field should always be 3 cells long.
+    items:
+      items:
+        - description:
+            The first cell represents a phandle to syscon
+        - description:
+            The second cell represents the register base address of the glue
+            layer in syscon
+        - description: |
+            The third cell represents the hardware version of the glue layer,
+            1 - used by mt8173 etc, revision 1 without following IPM rule;
+            2 - used by mt2712 etc, revision 2 with following IPM rule;
+            101 - used by mt8183, specific 1.01;
+            102 - used by mt8192, specific 1.02;
+          enum: [1, 2, 101, 102]
+
+  mediatek,u3p-dis-msk:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mask to disable u3ports, bit0 for u3port0,
+      bit1 for u3port1, ... etc
+
+  mediatek,u2p-dis-msk:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mask to disable u2ports, bit0 for u2port0,
+      bit1 for u2port1, ... etc; but can't disable u2port0 if dual role mode
+      is enabled, so will be skipped in this case.
+
+# Required child node when support dual-role
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/usb/mediatek,mtk-xhci.yaml#
+    description:
+      The xhci should be added as subnode to mtu3 as shown in the following
+      example if the host mode is enabled.
+
+dependencies:
+  connector: [ 'usb-role-switch' ]
+  port: [ 'usb-role-switch' ]
+  role-switch-default-mode: [ 'usb-role-switch' ]
+  wakeup-source: [ 'mediatek,syscon-wakeup' ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # Dual role switch by extcon
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    usb@11271000 {
+        compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3";
+        reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
+        reg-names = "mac", "ippc";
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>;
+        phys = <&phy_port0 PHY_TYPE_USB3>, <&phy_port1 PHY_TYPE_USB2>;
+        power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+        clocks = <&topckgen CLK_TOP_USB30_SEL>;
+        clock-names = "sys_ck";
+        vusb33-supply = <&mt6397_vusb_reg>;
+        vbus-supply = <&usb_p0_vbus>;
+        extcon = <&extcon_usb>;
+        dr_mode = "otg";
+        wakeup-source;
+        mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        xhci: usb@11270000 {
+            compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
+            reg = <0x11270000 0x1000>;
+            reg-names = "mac";
+            interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+            clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+            clock-names = "sys_ck", "ref_ck";
+            vusb33-supply = <&mt6397_vusb_reg>;
+        };
+    };
+
+  # Dual role switch by gpio-usb-b-connector
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/power/mt2712-power.h>
+
+    usb@112c1000 {
+        compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3";
+        reg = <0x112c1000 0x3000>, <0x112d0700 0x0100>;
+        reg-names = "mac", "ippc";
+        interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_LOW>;
+        phys = <&u2port2 PHY_TYPE_USB2>;
+        power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>;
+        clocks = <&topckgen CLK_TOP_USB30_SEL>;
+        clock-names = "sys_ck";
+        dr_mode = "otg";
+        usb-role-switch;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        host0: usb@11270000 {
+            compatible = "mediatek,mt2712-xhci", "mediatek,mtk-xhci";
+            reg = <0x11270000 0x1000>;
+            reg-names = "mac";
+            interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>;
+            clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+            clock-names = "sys_ck", "ref_ck";
+        };
+
+        connector {
+            compatible = "gpio-usb-b-connector", "usb-b-connector";
+            type = "micro";
+            id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
+            vbus-supply = <&usb_p0_vbus>;
+        };
+    };
+
+  # Dual role switch with type-c
+  - |
+    usb@11201000 {
+        compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
+        reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>;
+        reg-names = "mac", "ippc";
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+        phys = <&u2port0 PHY_TYPE_USB2>;
+        clocks = <&clk26m>;
+        clock-names = "sys_ck";
+        mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+        wakeup-source;
+        dr_mode = "otg";
+        usb-role-switch;
+        role-switch-default-mode = "host";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        host: usb@11200000 {
+            compatible = "mediatek,mt8183-xhci", "mediatek,mtk-xhci";
+            reg = <0x11200000 0x1000>;
+            reg-names = "mac";
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&clk26m>;
+            clock-names = "sys_ck";
+        };
+
+        port {
+            usb_role_sw: endpoint {
+                remote-endpoint = <&hs_ep>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
deleted file mode 100644
index 2b8a87c90d9e..000000000000
--- a/Documentation/devicetree/bindings/usb/mediatek,musb.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-MediaTek musb DRD/OTG controller
--------------------------------------------
-
-Required properties:
- - compatible      : should be one of:
-                     "mediatek,mt2701-musb"
-                     ...
-                     followed by "mediatek,mtk-musb"
- - reg             : specifies physical base address and size of
-                     the registers
- - interrupts      : interrupt used by musb controller
- - interrupt-names : must be "mc"
- - phys            : PHY specifier for the OTG phy
- - dr_mode         : should be one of "host", "peripheral" or "otg",
-                     refer to usb/generic.txt
- - clocks          : a list of phandle + clock-specifier pairs, one for
-                     each entry in clock-names
- - clock-names     : must contain "main", "mcu", "univpll"
-                     for clocks of controller
-
-Optional properties:
- - power-domains   : a phandle to USB power domain node to control USB's
-                     MTCMOS
-
-Required child nodes:
- usb connector node as defined in bindings/connector/usb-connector.txt
-Optional properties:
- - id-gpios        : input GPIO for USB ID pin.
- - vbus-gpios      : input GPIO for USB VBUS pin.
- - vbus-supply     : reference to the VBUS regulator, needed when supports
-                     dual-role mode
- - usb-role-switch : use USB Role Switch to support dual-role switch, see
-                     usb/generic.txt.
-
-Example:
-
-usb2: usb@11200000 {
-	compatible = "mediatek,mt2701-musb",
-		     "mediatek,mtk-musb";
-	reg = <0 0x11200000 0 0x1000>;
-	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
-	interrupt-names = "mc";
-	phys = <&u2port2 PHY_TYPE_USB2>;
-	dr_mode = "otg";
-	clocks = <&pericfg CLK_PERI_USB0>,
-		 <&pericfg CLK_PERI_USB0_MCU>,
-		 <&pericfg CLK_PERI_USB_SLV>;
-	clock-names = "main","mcu","univpll";
-	power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-	usb-role-switch;
-	connector{
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
-		vbus-supply = <&usb_vbus>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.yaml b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml
new file mode 100644
index 000000000000..f16ab30a95d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/mediatek,musb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MUSB DRD/OTG Controller
+
+maintainers:
+  - Min Guo <min.guo@mediatek.com>
+
+properties:
+  $nodename:
+    pattern: '^usb@[0-9a-f]+$'
+
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8516-musb
+          - mediatek,mt2701-musb
+          - mediatek,mt7623-musb
+      - const: mediatek,mtk-musb
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: mc
+
+  clocks:
+    items:
+      - description: The main/core clock
+      - description: The system bus clock
+      - description: The 48Mhz clock
+
+  clock-names:
+    items:
+      - const: main
+      - const: mcu
+      - const: univpll
+
+  phys:
+    maxItems: 1
+
+  usb-role-switch:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Support role switch. See usb/generic.txt
+    type: boolean
+
+  dr_mode:
+    enum:
+      - host
+      - otg
+      - peripheral
+
+  power-domains:
+    description: A phandle to USB power domain node to control USB's MTCMOS
+    maxItems: 1
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    description: Connector for dual role switch
+    type: object
+
+dependencies:
+  usb-role-switch: [ 'connector' ]
+  connector: [ 'usb-role-switch' ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - phys
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt2701-power.h>
+
+    usb@11200000 {
+        compatible = "mediatek,mt2701-musb", "mediatek,mtk-musb";
+        reg = <0x11200000 0x1000>;
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "mc";
+        phys = <&u2port2 PHY_TYPE_USB2>;
+        dr_mode = "otg";
+        clocks = <&pericfg CLK_PERI_USB0>,
+                 <&pericfg CLK_PERI_USB0_MCU>,
+                 <&pericfg CLK_PERI_USB_SLV>;
+        clock-names = "main","mcu","univpll";
+        power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+        usb-role-switch;
+
+        connector {
+            compatible = "gpio-usb-b-connector", "usb-b-connector";
+            type = "micro";
+            id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+            vbus-supply = <&usb_vbus>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml b/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml
new file mode 100644
index 000000000000..c5e9ce2e7bc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/microchip,mpfs-musb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS USB Controller
+
+allOf:
+  - $ref: usb-drd.yaml#
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpfs-musb
+
+  dr_mode: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: dma
+      - const: mc
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    usb@20201000 {
+        compatible = "microchip,mpfs-musb";
+        reg = <0x20201000 0x1000>;
+        clocks = <&clkcfg CLK_USB>;
+        interrupt-parent = <&plic>;
+        interrupts = <86>, <87>;
+        interrupt-names = "dma", "mc";
+        dr_mode = "host";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt b/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt
index 5a0f1f14fbfa..352a0a1e2f76 100644
--- a/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt
@@ -5,7 +5,9 @@ EHCI:
 -----
 
 Required properties:
-- compatible: "nuvoton,npcm750-ehci"
+- compatible: should be one of
+    "nuvoton,npcm750-ehci"
+    "nuvoton,npcm845-ehci"
 - interrupts: Should contain the EHCI interrupt
 - reg:        Physical address and length of the register set for the device
 
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
new file mode 100644
index 000000000000..fd6e7c81426e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC)
+
+description:
+  The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and
+  USB 3.0 SuperSpeed protocols.
+
+maintainers:
+  - Nagarjuna Kristam <nkristam@nvidia.com>
+  - JC Kuo <jckuo@nvidia.com>
+  - Thierry Reding <treding@nvidia.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nvidia,tegra210-xudc # For Tegra210
+          - nvidia,tegra186-xudc # For Tegra186
+          - nvidia,tegra194-xudc # For Tegra194
+
+  reg:
+    minItems: 2
+    items:
+      - description: XUSB device controller registers
+      - description: XUSB device PCI Config registers
+      - description: XUSB device registers.
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: base
+      - const: fpci
+      - const: ipfs
+
+  interrupts:
+    maxItems: 1
+    description: Must contain the XUSB device interrupt.
+
+  clocks:
+    minItems: 4
+    items:
+      - description: Clock to enable core XUSB dev clock.
+      - description: Clock to enable XUSB super speed clock.
+      - description: Clock to enable XUSB super speed dev clock.
+      - description: Clock to enable XUSB high speed dev clock.
+      - description: Clock to enable XUSB full speed dev clock.
+
+  clock-names:
+    minItems: 4
+    items:
+      - const: dev
+      - const: ss
+      - const: ss_src
+      - const: fs_src
+      - const: hs_src
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: XUSBB(device) power-domain
+      - description: XUSBA(superspeed) power-domain
+
+  power-domain-names:
+    items:
+      - const: dev
+      - const: ss
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the XUSB pad controller that is used to configure the USB pads
+      used by the XUDC controller.
+
+  phys:
+    minItems: 1
+    description:
+      Must contain an entry for each entry in phy-names.
+      See ../phy/phy-bindings.txt for details.
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: usb2-0
+      - const: usb2-1
+      - const: usb2-2
+      - const: usb2-3
+      - const: usb3-0
+      - const: usb3-1
+      - const: usb3-2
+      - const: usb3-3
+
+  avddio-usb-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - nvidia,xusb-padctl
+  - phys
+  - phy-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra210-xudc
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+        clocks:
+          minItems: 5
+        clock-names:
+          minItems: 5
+      required:
+        - avddio-usb-supply
+        - hvdd-usb-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-xudc
+              - nvidia,tegra194-xudc
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          maxItems: 2
+        clocks:
+          maxItems: 4
+        clock-names:
+          maxItems: 4
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@700d0000 {
+        compatible = "nvidia,tegra210-xudc";
+        reg = <0x700d0000 0x8000>,
+              <0x700d8000 0x1000>,
+              <0x700d9000 0x1000>;
+        reg-names = "base", "fpci", "ipfs";
+
+        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>;
+        clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src";
+
+        power-domains = <&pd_xusbdev>, <&pd_xusbss>;
+        power-domain-names = "dev", "ss";
+
+        nvidia,xusb-padctl = <&padctl>;
+
+        phys = <&micro_b>;
+        phy-names = "usb2-0";
+
+        avddio-usb-supply = <&vdd_pex_1v05>;
+        hvdd-usb-supply = <&vdd_3v3_sys>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml b/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
new file mode 100644
index 000000000000..f238848ad094
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nxp,isp1760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP ISP1760 family controller bindings
+
+maintainers:
+  - Sebastian Siewior <bigeasy@linutronix.de>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  NXP ISP1760 family, which includes ISP1760/1761/1763 devicetree controller
+  bindings
+
+properties:
+  compatible:
+    enum:
+      - nxp,usb-isp1760
+      - nxp,usb-isp1761
+      - nxp,usb-isp1763
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Host controller interrupt
+      - description: Device controller interrupt in isp1761
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: host
+      - const: peripheral
+
+  bus-width:
+    description:
+      Number of data lines.
+    enum: [8, 16, 32]
+    default: 32
+
+  dr_mode:
+    enum:
+      - host
+      - peripheral
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    usb@40200000 {
+        compatible = "nxp,usb-isp1763";
+        reg = <0x40200000 0x100000>;
+        interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+        bus-width = <16>;
+        dr_mode = "host";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt
index 44c998c16f85..1c735573abc0 100644
--- a/Documentation/devicetree/bindings/usb/ohci-st.txt
+++ b/Documentation/devicetree/bindings/usb/ohci-st.txt
@@ -15,7 +15,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
 
  - resets		: phandle to the powerdown and reset controller for the USB IP
  - reset-names		: should be "power" and "softreset".
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 38d9bb8507cf..f0dbc5ae45ae 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -65,7 +65,7 @@ Sub-nodes:
 The dwc3 core should be added as subnode to omap dwc3 glue.
 - dwc3 :
    The binding details of dwc3 can be found in:
-   Documentation/devicetree/bindings/usb/dwc3.txt
+   Documentation/devicetree/bindings/usb/snps,dwc3.yaml
 
 omap_dwc3 {
 	compatible = "ti,dwc3";
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
deleted file mode 100644
index cb695aa3fba4..000000000000
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-Qualcomm SuperSpeed DWC3 USB SoC controller
-
-Required properties:
-- compatible:		Compatible list, contains
-			"qcom,dwc3"
-			"qcom,msm8996-dwc3" for msm8996 SOC.
-			"qcom,msm8998-dwc3" for msm8998 SOC.
-			"qcom,sdm845-dwc3" for sdm845 SOC.
-- reg:			Offset and length of register set for QSCRATCH wrapper
-- power-domains:	specifies a phandle to PM domain provider node
-- clocks:		A list of phandle + clock-specifier pairs for the
-				clocks listed in clock-names
-- clock-names:		Should contain the following:
-  "core"		Master/Core clock, have to be >= 125 MHz for SS
-				operation and >= 60MHz for HS operation
-  "mock_utmi"		Mock utmi clock needed for ITP/SOF generation in
-				host mode. Its frequency should be 19.2MHz.
-  "sleep"		Sleep clock, used for wakeup when USB3 core goes
-				into low power mode (U3).
-
-Optional clocks:
-  "iface"		System bus AXI clock.
-			Not present on "qcom,msm8996-dwc3" compatible.
-  "cfg_noc"		System Config NOC clock.
-			Not present on "qcom,msm8996-dwc3" compatible.
-- assigned-clocks:	Should be:
-				MOCK_UTMI_CLK
-				MASTER_CLK
-- assigned-clock-rates: Should be:
-                                19.2Mhz (192000000) for MOCK_UTMI_CLK
-                                >=125Mhz (125000000) for MASTER_CLK in SS mode
-                                >=60Mhz (60000000) for MASTER_CLK in HS mode
-
-Optional properties:
-- resets:		Phandle to reset control that resets core and wrapper.
-- interrupts:		specifies interrupts from controller wrapper used
-			to wakeup from low power/susepnd state.	Must contain
-			one or more entry for interrupt-names property
-- interrupt-names:	Must include the following entries:
-			- "hs_phy_irq": The interrupt that is asserted when a
-			   wakeup event is received on USB2 bus
-			- "ss_phy_irq": The interrupt that is asserted when a
-			   wakeup event is received on USB3 bus
-			- "dm_hs_phy_irq" and "dp_hs_phy_irq": Separate
-			   interrupts for any wakeup event on DM and DP lines
-- qcom,select-utmi-as-pipe-clk: if present, disable USB3 pipe_clk requirement.
-				Used when dwc3 operates without SSPHY and only
-				HS/FS/LS modes are supported.
-
-Required child node:
-A child node must exist to represent the core DWC3 IP block. The name of
-the node is not important. The content of the node is defined in dwc3.txt.
-
-Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt   - USB3 QMP PHY
-Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY
-
-Example device nodes:
-
-		hs_phy: phy@100f8800 {
-			compatible = "qcom,qusb2-v2-phy";
-			...
-		};
-
-		ss_phy: phy@100f8830 {
-			compatible = "qcom,qmp-v3-usb3-phy";
-			...
-		};
-
-		usb3_0: usb30@a6f8800 {
-			compatible = "qcom,dwc3";
-			reg = <0xa6f8800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			interrupts = <0 131 0>, <0 486 0>, <0 488 0>, <0 489 0>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-				  "dm_hs_phy_irq", "dp_hs_phy_irq";
-
-			clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
-				<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
-				<&gcc GCC_USB30_PRIM_SLEEP_CLK>;
-			clock-names = "core", "mock_utmi", "sleep";
-
-			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <133000000>;
-
-			resets = <&gcc GCC_USB30_PRIM_BCR>;
-			reset-names = "core_reset";
-			power-domains = <&gcc USB30_PRIM_GDSC>;
-			qcom,select-utmi-as-pipe-clk;
-
-			dwc3@10000000 {
-				compatible = "snps,dwc3";
-				reg = <0x10000000 0xcd00>;
-				interrupts = <0 205 0x4>;
-				phys = <&hs_phy>, <&ss_phy>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "host";
-			};
-		};
-
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
new file mode 100644
index 000000000000..a6e6abb4dfa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -0,0 +1,504 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@quicinc.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,ipq4019-dwc3
+          - qcom,ipq6018-dwc3
+          - qcom,ipq8064-dwc3
+          - qcom,ipq8074-dwc3
+          - qcom,msm8953-dwc3
+          - qcom,msm8994-dwc3
+          - qcom,msm8996-dwc3
+          - qcom,msm8998-dwc3
+          - qcom,qcs404-dwc3
+          - qcom,sc7180-dwc3
+          - qcom,sc7280-dwc3
+          - qcom,sc8280xp-dwc3
+          - qcom,sdm660-dwc3
+          - qcom,sdm670-dwc3
+          - qcom,sdm845-dwc3
+          - qcom,sdx55-dwc3
+          - qcom,sdx65-dwc3
+          - qcom,sm4250-dwc3
+          - qcom,sm6115-dwc3
+          - qcom,sm6125-dwc3
+          - qcom,sm6350-dwc3
+          - qcom,sm6375-dwc3
+          - qcom,sm8150-dwc3
+          - qcom,sm8250-dwc3
+          - qcom,sm8350-dwc3
+          - qcom,sm8450-dwc3
+      - const: qcom,dwc3
+
+  reg:
+    description: Offset and length of register set for QSCRATCH wrapper
+    maxItems: 1
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  power-domains:
+    description: specifies a phandle to PM domain provider node
+    maxItems: 1
+
+  clocks:
+    description: |
+      Several clocks are used, depending on the variant. Typical ones are::
+       - cfg_noc:: System Config NOC clock.
+       - core:: Master/Core clock, has to be >= 125 MHz for SS operation and >=
+                60MHz for HS operation.
+       - iface:: System bus AXI clock.
+       - sleep:: Sleep clock, used for wakeup when USB3 core goes into low
+                 power mode (U3).
+       - mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host
+                     mode. Its frequency should be 19.2MHz.
+    minItems: 1
+    maxItems: 9
+
+  clock-names:
+    minItems: 1
+    maxItems: 9
+
+  assigned-clocks:
+    items:
+      - description: Phandle and clock specifier of MOCK_UTMI_CLK.
+      - description: Phandle and clock specifoer of MASTER_CLK.
+
+  assigned-clock-rates:
+    items:
+      - description: Must be 19.2MHz (19200000).
+      - description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode.
+  resets:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: usb-ddr
+      - const: apps-usb
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 4
+
+  qcom,select-utmi-as-pipe-clk:
+    description:
+      If present, disable USB3 pipe_clk requirement.
+      Used when dwc3 operates without SSPHY and only
+      HS/FS/LS modes are supported.
+    type: boolean
+
+  wakeup-source: true
+
+# Required child node:
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+
+    properties:
+      wakeup-source: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - power-domains
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: core
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8064-dwc3
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Master/Core clock, has to be >= 125 MHz
+                for SS operation and >= 60MHz for HS operation.
+        clock-names:
+          items:
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8953-dwc3
+              - qcom,msm8996-dwc3
+              - qcom,msm8998-dwc3
+              - qcom,sc7180-dwc3
+              - qcom,sc7280-dwc3
+              - qcom,sdm670-dwc3
+              - qcom,sdm845-dwc3
+              - qcom,sdx55-dwc3
+              - qcom,sm6350-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 4
+        clock-names:
+          oneOf:
+            - items:
+                - const: core
+                - const: sleep
+                - const: mock_utmi
+            - items:
+                - const: cfg_noc
+                - const: core
+                - const: sleep
+                - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8994-dwc3
+              - qcom,qcs404-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 9
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: noc_aggr
+            - const: noc_aggr_north
+            - const: noc_aggr_south
+            - const: noc_sys
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6115-dwc3
+              - qcom,sm6125-dwc3
+              - qcom,sm8150-dwc3
+              - qcom,sm8250-dwc3
+              - qcom,sm8450-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: xo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8350-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 6
+        clock-names:
+          minItems: 5
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: xo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-dwc3
+              - qcom,ipq6018-dwc3
+              - qcom,ipq8064-dwc3
+              - qcom,ipq8074-dwc3
+              - qcom,msm8994-dwc3
+              - qcom,qcs404-dwc3
+              - qcom,sc7180-dwc3
+              - qcom,sdm670-dwc3
+              - qcom,sdm845-dwc3
+              - qcom,sdx55-dwc3
+              - qcom,sdx65-dwc3
+              - qcom,sm4250-dwc3
+              - qcom,sm6125-dwc3
+              - qcom,sm6350-dwc3
+              - qcom,sm8150-dwc3
+              - qcom,sm8250-dwc3
+              - qcom,sm8350-dwc3
+              - qcom,sm8450-dwc3
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: The interrupt that is asserted
+                when a wakeup event is received on USB2 bus.
+            - description: The interrupt that is asserted
+                when a wakeup event is received on USB3 bus.
+            - description: Wakeup event on DM line.
+            - description: Wakeup event on DP line.
+        interrupt-names:
+          items:
+            - const: hs_phy_irq
+            - const: ss_phy_irq
+            - const: dm_hs_phy_irq
+            - const: dp_hs_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8953-dwc3
+              - qcom,msm8996-dwc3
+              - qcom,msm8998-dwc3
+              - qcom,sm6115-dwc3
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 2
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 4
+        interrupt-names:
+          minItems: 3
+          items:
+            - const: hs_phy_irq
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-dwc3
+    then:
+      properties:
+        interrupts:
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: pwr_event
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+            - const: ss_phy_irq
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@a6f8800 {
+            compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+            reg = <0 0x0a6f8800 0 0x400>;
+
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+            clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+                     <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+                     <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+                     <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+                     <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+            clock-names = "cfg_noc",
+                          "core",
+                          "iface",
+                          "sleep",
+                          "mock_utmi";
+
+            assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+                          <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+            assigned-clock-rates = <19200000>, <150000000>;
+
+            interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hs_phy_irq", "ss_phy_irq",
+                          "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+            power-domains = <&gcc USB30_PRIM_GDSC>;
+
+            resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+            usb@a600000 {
+                compatible = "snps,dwc3";
+                reg = <0 0x0a600000 0 0xcd00>;
+                interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+                iommus = <&apps_smmu 0x740 0>;
+                snps,dis_u2_susphy_quirk;
+                snps,dis_enblslpm_quirk;
+                phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+                phy-names = "usb2-phy", "usb3-phy";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
new file mode 100644
index 000000000000..50f2b505bdeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/realtek,rts5411.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for the Realtek RTS5411 USB 3.0 hub controller
+
+maintainers:
+  - Matthias Kaehlcke <mka@chromium.org>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - usbbda,5411
+          - usbbda,411
+
+  reg: true
+
+  vdd-supply:
+    description:
+      phandle to the regulator that provides power to the hub.
+
+  peer-hub:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description:
+      phandle to the peer hub on the controller.
+
+required:
+  - peer-hub
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usbbda,5411";
+            reg = <1>;
+            vdd-supply = <&pp3300_hub>;
+            peer-hub = <&hub_3_0>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+            compatible = "usbbda,411";
+            reg = <2>;
+            vdd-supply = <&pp3300_hub>;
+            peer-hub = <&hub_2_0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml
new file mode 100644
index 000000000000..4c5efaf02308
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/renesas,usb-xhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas USB xHCI controllers
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: "usb-xhci.yaml"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,xhci-r8a7742 # RZ/G1H
+              - renesas,xhci-r8a7743 # RZ/G1M
+              - renesas,xhci-r8a7744 # RZ/G1N
+              - renesas,xhci-r8a7790 # R-Car H2
+              - renesas,xhci-r8a7791 # R-Car M2-W
+              - renesas,xhci-r8a7793 # R-Car M2-N
+          - const: renesas,rcar-gen2-xhci # R-Car Gen2 and RZ/G1
+      - items:
+          - enum:
+              - renesas,xhci-r8a774a1 # RZ/G2M
+              - renesas,xhci-r8a774b1 # RZ/G2N
+              - renesas,xhci-r8a774c0 # RZ/G2E
+              - renesas,xhci-r8a774e1 # RZ/G2H
+              - renesas,xhci-r8a7795  # R-Car H3
+              - renesas,xhci-r8a7796  # R-Car M3-W
+              - renesas,xhci-r8a77961 # R-Car M3-W+
+              - renesas,xhci-r8a77965 # R-Car M3-N
+              - renesas,xhci-r8a77990 # R-Car E3
+          - const: renesas,rcar-gen3-xhci # R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: usb
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    xhci0: usb@ee000000 {
+        compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
+        reg = <0xee000000 0xc00>;
+        interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 328>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 328>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
index 92d8631b9aa6..55dfd121b555 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
@@ -11,25 +11,55 @@ maintainers:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,r8a774a1-usb3-peri # RZ/G2M
-          - renesas,r8a774b1-usb3-peri # RZ/G2N
-          - renesas,r8a774c0-usb3-peri # RZ/G2E
-          - renesas,r8a7795-usb3-peri  # R-Car H3
-          - renesas,r8a7796-usb3-peri  # R-Car M3-W
-          - renesas,r8a77965-usb3-peri # R-Car M3-N
-          - renesas,r8a77990-usb3-peri # R-Car E3
-      - const: renesas,rcar-gen3-usb3-peri
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a774a1-usb3-peri # RZ/G2M
+              - renesas,r8a774b1-usb3-peri # RZ/G2N
+              - renesas,r8a774c0-usb3-peri # RZ/G2E
+              - renesas,r8a774e1-usb3-peri # RZ/G2H
+              - renesas,r8a7795-usb3-peri  # R-Car H3
+              - renesas,r8a7796-usb3-peri  # R-Car M3-W
+              - renesas,r8a77961-usb3-peri # R-Car M3-W+
+              - renesas,r8a77965-usb3-peri # R-Car M3-N
+              - renesas,r8a77990-usb3-peri # R-Car E3
+          - const: renesas,rcar-gen3-usb3-peri
+
+      - items:
+          - enum:
+              - renesas,r9a09g011-usb3-peri # RZ/V2M
+          - const: renesas,rzv2m-usb3-peri
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Combined interrupt for DMA, SYS and ERR
+      - description: Dual Role Device (DRD)
+      - description: Battery Charging
+      - description: Global Purpose Input
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: all_p
+      - const: drd
+      - const: bc
+      - const: gpi
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Main clock
+      - description: Register access clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: aclk
+      - const: reg
 
   phys:
     maxItems: 1
@@ -41,7 +71,15 @@ properties:
     maxItems: 1
 
   resets:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Peripheral reset
+      - description: DRD reset
+
+  reset-names:
+    items:
+      - const: aresetn_p
+      - const: drd_reset
 
   usb-role-switch:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -51,17 +89,64 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: phandle of a companion.
 
-  port:
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
     description: |
       any connector to the data bus of this controller should be modelled
       using the OF graph bindings specified, if the "usb-role-switch"
       property is used.
 
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: High Speed (HS) data bus.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS) data bus.
+
+    required:
+      - port@0
+      - port@1
+
 required:
   - compatible
   - interrupts
   - clocks
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzv2m-usb3-peri
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+        interrupts:
+          minItems: 4
+        interrupt-names:
+          minItems: 4
+        resets:
+          minItems: 2
+      required:
+        - clock-names
+        - interrupt-names
+        - resets
+        - reset-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        interrupts:
+          maxItems: 1
+        resets:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:
@@ -72,15 +157,26 @@ examples:
 
     usb3_peri0: usb@ee020000 {
         compatible = "renesas,r8a774c0-usb3-peri", "renesas,rcar-gen3-usb3-peri";
-        reg = <0 0xee020000 0 0x400>;
+        reg = <0xee020000 0x400>;
         interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&cpg CPG_MOD 328>;
         companion = <&xhci0>;
         usb-role-switch;
 
-        port {
-            usb3_role_switch: endpoint {
-                remote-endpoint = <&hd3ss3220_ep>;
-            };
+        ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                        reg = <0>;
+                        usb3_hs_ep: endpoint {
+                                remote-endpoint = <&hs_ep>;
+                        };
+                };
+                port@1 {
+                        reg = <1>;
+                        usb3_role_switch: endpoint {
+                                remote-endpoint = <&hd3ss3220_out_ep>;
+                        };
+                };
         };
     };
diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
index 469affa872d3..bad55dfb2fa0 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
@@ -17,11 +17,16 @@ properties:
           - const: renesas,rza1-usbhs
 
       - items:
-          - const: renesas,usbhs-r7s9210 # RZ/A2
+          - enum:
+              - renesas,usbhs-r7s9210   # RZ/A2
+              - renesas,usbhs-r9a07g043 # RZ/G2UL
+              - renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
+              - renesas,usbhs-r9a07g054 # RZ/V2L
           - const: renesas,rza2-usbhs
 
       - items:
           - enum:
+              - renesas,usbhs-r8a7742  # RZ/G1H
               - renesas,usbhs-r8a7743  # RZ/G1M
               - renesas,usbhs-r8a7744  # RZ/G1N
               - renesas,usbhs-r8a7745  # RZ/G1E
@@ -38,8 +43,10 @@ properties:
               - renesas,usbhs-r8a774a1 # RZ/G2M
               - renesas,usbhs-r8a774b1 # RZ/G2N
               - renesas,usbhs-r8a774c0 # RZ/G2E
+              - renesas,usbhs-r8a774e1 # RZ/G2H
               - renesas,usbhs-r8a7795  # R-Car H3
               - renesas,usbhs-r8a7796  # R-Car M3-W
+              - renesas,usbhs-r8a77961 # R-Car M3-W+
               - renesas,usbhs-r8a77965 # R-Car M3-N
               - renesas,usbhs-r8a77990 # R-Car E3
               - renesas,usbhs-r8a77995 # R-Car D3
@@ -50,14 +57,14 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 3
     items:
       - description: USB 2.0 host
       - description: USB 2.0 peripheral
       - description: USB 2.0 clock selector
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
 
   renesas,buswait:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -65,17 +72,15 @@ properties:
       Integer to use BUSWAIT register.
 
   renesas,enable-gpio:
+    maxItems: 1
     description: |
       gpio specifier to check GPIO determining if USB function should be
       enabled.
 
   phys:
     maxItems: 1
-    items:
-      - description: phandle + phy specifier pair.
 
   phy-names:
-    maxItems: 1
     items:
       - const: usb
 
@@ -85,7 +90,6 @@ properties:
 
   dma-names:
     minItems: 2
-    maxItems: 4
     items:
       - const: ch0
       - const: ch1
@@ -99,7 +103,6 @@ properties:
 
   resets:
     minItems: 1
-    maxItems: 2
     items:
       - description: USB 2.0 host
       - description: USB 2.0 peripheral
@@ -110,6 +113,30 @@ required:
   - clocks
   - interrupts
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,usbhs-r9a07g043
+              - renesas,usbhs-r9a07g044
+              - renesas,usbhs-r9a07g054
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: U2P_IXL_INT
+            - description: U2P_INT_DMA[0]
+            - description: U2P_INT_DMA[1]
+            - description: U2P_INT_DMAERR
+      required:
+        - resets
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:
@@ -120,7 +147,7 @@ examples:
 
     usbhs: usb@e6590000 {
         compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
-        reg = <0 0xe6590000 0 0x100>;
+        reg = <0xe6590000 0x100>;
         interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&cpg CPG_MOD 704>;
     };
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
index e3fc57e605ed..6f8115db2ea9 100644
--- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
@@ -9,7 +9,7 @@ Required properties:
 Required sub-node:
 - connector: The "usb-c-connector" attached to the tcpci chip, the bindings
   of connector node are specified in
-  Documentation/devicetree/bindings/connector/usb-connector.txt
+  Documentation/devicetree/bindings/connector/usb-connector.yaml
 
 Example :
 rt1711h@4e {
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
new file mode 100644
index 000000000000..1999f614c89b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Richtek RT1711H Type-C Port Switch and Power Delivery controller
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  The RT1711H is a USB Type-C controller that complies with the latest
+  USB Type-C and PD standards. It does the USB Type-C detection including attach
+  and orientation. It integrates the physical layer of the USB BMC power
+  delivery protocol to allow up to 100W of power. The BMC PD block enables full
+  support for alternative interfaces of the Type-C specification.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt1711h
+      - richtek,rt1715
+    description:
+      RT1711H support PD20, RT1715 support PD30 except Fast Role Swap.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - connector
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt1711h@4e {
+        compatible = "richtek,rt1711h";
+        reg = <0x4e>;
+        interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+        wakeup-source;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+          data-role = "dual";
+          power-role = "dual";
+          try-power-role = "sink";
+          source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+          sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+          op-sink-microwatt = <10000000>;
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+              reg = <0>;
+              endpoint {
+                remote-endpoint = <&usb_hs>;
+              };
+            };
+            port@1 {
+              reg = <1>;
+              endpoint {
+                remote-endpoint = <&usb_ss>;
+              };
+            };
+            port@2 {
+              reg = <2>;
+              endpoint {
+                remote-endpoint = <&dp_aux>;
+              };
+            };
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml
new file mode 100644
index 000000000000..65a93f7738d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/richtek,rt1719.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Richtek RT1719 sink-only Type-C PD controller bindings
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT1719 is a sink-only USB Type-C contoller that complies with the latest
+  USB Type-C and PD standards. It does the USB Type-C detection including attach
+  and orientation. It integrates the physical layer of the USB BMC power
+  delivery protocol to allow up to 100W of power. The BMC PD block enables full
+  support for alternative interfaces of the Type-C specification.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt1719
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    description: enable IRQ remote wakeup, see power/wakeup-source.txt
+    type: boolean
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - connector
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt1719@43 {
+        compatible = "richtek,rt1719";
+        reg = <0x43>;
+        interrupts-extended = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>;
+        wakeup-source;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+              reg = <0>;
+              endpoint {
+                remote-endpoint = <&usb_hs>;
+              };
+            };
+            port@1 {
+              reg = <1>;
+              endpoint {
+                remote-endpoint = <&usb_ss>;
+              };
+            };
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
deleted file mode 100644
index c8c4b00ecb94..000000000000
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Rockchip SuperSpeed DWC3 USB SoC controller
-
-Required properties:
-- compatible:	should contain "rockchip,rk3399-dwc3" for rk3399 SoC
-- clocks:	A list of phandle + clock-specifier pairs for the
-		clocks listed in clock-names
-- clock-names:	Should contain the following:
-  "ref_clk"	Controller reference clk, have to be 24 MHz
-  "suspend_clk"	Controller suspend clk, have to be 24 MHz or 32 KHz
-  "bus_clk"	Master/Core clock, have to be >= 62.5 MHz for SS
-		operation and >= 30MHz for HS operation
-  "grf_clk"	Controller grf clk
-
-Required child node:
-A child node must exist to represent the core DWC3 IP block. The name of
-the node is not important. The content of the node is defined in dwc3.txt.
-
-Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt - USB2.0 PHY
-Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt     - Type-C PHY
-
-Example device nodes:
-
-	usbdrd3_0: usb@fe800000 {
-		compatible = "rockchip,rk3399-dwc3";
-		clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
-			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
-		clock-names = "ref_clk", "suspend_clk",
-			      "bus_clk", "grf_clk";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		usbdrd_dwc3_0: dwc3@fe800000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0xfe800000 0x0 0x100000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "otg";
-		};
-	};
-
-	usbdrd3_1: usb@fe900000 {
-		compatible = "rockchip,rk3399-dwc3";
-		clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
-			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
-		clock-names = "ref_clk", "suspend_clk",
-			      "bus_clk", "grf_clk";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		usbdrd_dwc3_1: dwc3@fe900000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0xfe900000 0x0 0x100000>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "otg";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
new file mode 100644
index 000000000000..b3798d94d2fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/rockchip,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The common content of the node is defined in snps,dwc3.yaml.
+
+  Phy documentation is provided in the following places.
+
+  USB2.0 PHY
+  Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
+
+  Type-C PHY
+  Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
+
+allOf:
+  - $ref: snps,dwc3.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3328-dwc3
+          - rockchip,rk3399-dwc3
+          - rockchip,rk3568-dwc3
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,rk3328-dwc3
+          - rockchip,rk3399-dwc3
+          - rockchip,rk3568-dwc3
+      - const: snps,dwc3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description:
+          Controller reference clock, must to be 24 MHz
+      - description:
+          Controller suspend clock, must to be 24 MHz or 32 KHz
+      - description:
+          Master/Core clock, must to be >= 62.5 MHz for SS
+          operation and >= 30MHz for HS operation
+      - description:
+          Controller grf clock
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: ref_clk
+      - const: suspend_clk
+      - const: bus_clk
+      - const: grf_clk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: usb3-otg
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      usbdrd3_0: usb@fe800000 {
+        compatible = "rockchip,rk3399-dwc3", "snps,dwc3";
+        reg = <0x0 0xfe800000 0x0 0x100000>;
+        interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+                 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
+        clock-names = "ref_clk", "suspend_clk",
+                      "bus_clk", "grf_clk";
+        dr_mode = "otg";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
new file mode 100644
index 000000000000..6b9a3bcb3926
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/samsung,exynos-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC USB 3.0 DWC3 Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5250-dwusb3
+      - samsung,exynos5433-dwusb3
+      - samsung,exynos7-dwusb3
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  ranges: true
+
+  '#size-cells':
+    const: 1
+
+  vdd10-supply:
+    description: 1.0V power supply
+
+  vdd33-supply:
+    description: 3.0V/3.3V power supply
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+    description: Required child node
+
+required:
+  - compatible
+  - '#address-cells'
+  - clocks
+  - clock-names
+  - ranges
+  - '#size-cells'
+  - vdd10-supply
+  - vdd33-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5250-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: usbdrd30
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos54333-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aclk
+            - const: susp_clk
+            - const: pipe_pclk
+            - const: phyclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: usbdrd30
+            - const: usbdrd30_susp_clk
+            - const: usbdrd30_axius_clk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb {
+        compatible = "samsung,exynos5250-dwusb3";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        clocks = <&clock CLK_USBD300>;
+        clock-names = "usbdrd30";
+        vdd33-supply = <&ldo9_reg>;
+        vdd10-supply = <&ldo11_reg>;
+
+        usb@12000000 {
+            compatible = "snps,dwc3";
+            reg = <0x12000000 0x10000>;
+            interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+            phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+            phy-names = "usb2-phy", "usb3-phy";
+            snps,dis_u3_susphy_quirk;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml
new file mode 100644
index 000000000000..caa572dcee02
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/samsung,exynos-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC USB 2.0 EHCI/OHCI Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-ehci
+      - samsung,exynos4210-ohci
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: usbhost
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    minItems: 1
+    maxItems: 3
+
+  phy-names:
+    items:
+      enum: [host, hsic0, hsic1]
+    minItems: 1
+    maxItems: 3
+
+  reg:
+    maxItems: 1
+
+  samsung,vbus-gpio:
+    description:
+      Only for controller in EHCI mode, if present, specifies the GPIO that
+      needs to be pulled up for the bus to be powered.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - phys
+  - phy-names
+  - reg
+
+allOf:
+  - $ref: usb-hcd.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4210-ohci
+    then:
+      properties:
+        samsung,vbus-gpio: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@12110000 {
+        compatible = "samsung,exynos4210-ehci";
+        reg = <0x12110000 0x100>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_USBH20>;
+        clock-names = "usbhost";
+        phys = <&usb2_phy 0>;
+        phy-names = "host";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub@1 {
+            compatible = "usb0424,9514";
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            usbether@1 {
+                compatible = "usb0424,ec00";
+                reg = <1>;
+                local-mac-address = [00 00 00 00 00 00];
+            };
+        };
+    };
+
+    usb@12120000 {
+        compatible = "samsung,exynos4210-ohci";
+        reg = <0x12120000 0x100>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_USBH20>;
+        clock-names = "usbhost";
+        phys = <&usb2_phy 0>;
+        phy-names = "host";
+    };
diff --git a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
new file mode 100644
index 000000000000..a09f4528aea3
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/smsc,usb3503.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SMSC USB3503 High-Speed Hub Controller
+
+maintainers:
+  - Dongjin Kim <tobetter@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - smsc,usb3503
+      - smsc,usb3503a
+
+  reg:
+    maxItems: 1
+
+  connect-gpios:
+    maxItems: 1
+    description: >
+      GPIO for connect
+
+  intn-gpios:
+    maxItems: 1
+    description: >
+      GPIO for interrupt
+
+  reset-gpios:
+    maxItems: 1
+    description: >
+      GPIO for reset
+
+  disabled-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 3
+    items:
+      minimum: 1
+      maximum: 3
+    description: >
+      Specifies the ports unused using their port number. Do not describe this
+      property if all ports have to be enabled.
+
+  initial-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    description: >
+      Specifies initial mode. 1 for Hub mode, 2 for standby mode.
+
+  clocks:
+    maxItems: 1
+    description: >
+      Clock used for driving REFCLK signal. If not provided the driver assumes
+      that clock signal is always available, its rate is specified by REF_SEL
+      pins and a value from the primary reference clock frequencies table is
+      used.
+
+  clock-names:
+    const: refclk
+
+  refclk-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Frequency of the REFCLK signal as defined by REF_SEL pins. If not
+      provided, driver will not set rate of the REFCLK signal and assume that a
+      value from the primary reference clock frequencies table is used.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          usb-hub@8 {
+              compatible = "smsc,usb3503";
+              reg = <0x08>;
+              connect-gpios = <&gpx3 0 1>;
+              disabled-ports = <2 3>;
+              intn-gpios = <&gpx3 4 1>;
+              reset-gpios = <&gpx3 5 1>;
+              initial-mode = <1>;
+              clocks = <&clks 80>;
+              clock-names = "refclk";
+          };
+      };
+
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+
+      usb-hub {
+          /* I2C is not connected */
+          compatible = "smsc,usb3503";
+          initial-mode = <1>; /* initialize in HUB mode */
+          disabled-ports = <1>;
+          intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+          reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
+          connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+          refclk-frequency = <19200000>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
new file mode 100644
index 000000000000..6d78048c4613
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -0,0 +1,391 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare USB3 Controller
+
+maintainers:
+  - Felipe Balbi <balbi@kernel.org>
+
+description:
+  This is usually a subnode to DWC3 glue to which it is connected, but can also
+  be presented as a standalone DT node with an optional vendor-specific
+  compatible string.
+
+allOf:
+  - $ref: usb-drd.yaml#
+  - if:
+      properties:
+        dr_mode:
+          const: peripheral
+
+      required:
+        - dr_mode
+    then:
+      $ref: usb.yaml#
+    else:
+      $ref: usb-xhci.yaml#
+
+properties:
+  compatible:
+    contains:
+      oneOf:
+        - const: snps,dwc3
+        - const: synopsys,dwc3
+          deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      It's either a single common DWC3 interrupt (dwc_usb3) or individual
+      interrupts for the host, gadget and DRD modes.
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 3
+    oneOf:
+      - const: dwc_usb3
+      - items:
+          enum: [host, peripheral, otg]
+
+  clocks:
+    description:
+      In general the core supports three types of clocks. bus_early is a
+      SoC Bus Clock (AHB/AXI/Native). ref generates ITP when the UTMI/ULPI
+      PHY is suspended. suspend clocks a small part of the USB3 core when
+      SS PHY in P3. But particular cases may differ from that having less
+      or more clock sources with another names.
+
+  clock-names:
+    contains:
+      anyOf:
+        - enum: [bus_early, ref, suspend]
+        - true
+
+  dma-coherent: true
+
+  iommus:
+    maxItems: 1
+
+  usb-phy:
+    minItems: 1
+    items:
+      - description: USB2/HS PHY
+      - description: USB3/SS PHY
+
+  phys:
+    minItems: 1
+    maxItems: 2
+
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - usb2-phy
+        - usb3-phy
+
+  resets:
+    minItems: 1
+
+  snps,usb2-lpm-disable:
+    description: Indicate if we don't want to enable USB2 HW LPM for host
+      mode.
+    type: boolean
+
+  snps,usb3_lpm_capable:
+    description: Determines if platform is USB3 LPM capable
+    type: boolean
+
+  snps,usb2-gadget-lpm-disable:
+    description: Indicate if we don't want to enable USB2 HW LPM for gadget
+      mode.
+    type: boolean
+
+  snps,dis-start-transfer-quirk:
+    description:
+      When set, disable isoc START TRANSFER command failure SW work-around
+      for DWC_usb31 version 1.70a-ea06 and prior.
+    type: boolean
+
+  snps,disable_scramble_quirk:
+    description:
+      True when SW should disable data scrambling. Only really useful for FPGA
+      builds.
+    type: boolean
+
+  snps,has-lpm-erratum:
+    description: True when DWC3 was configured with LPM Erratum enabled
+    type: boolean
+
+  snps,lpm-nyet-threshold:
+    description: LPM NYET threshold
+    $ref: /schemas/types.yaml#/definitions/uint8
+
+  snps,u2exit_lfps_quirk:
+    description: Set if we want to enable u2exit lfps quirk
+    type: boolean
+
+  snps,u2ss_inp3_quirk:
+    description: Set if we enable P3 OK for U2/SS Inactive quirk
+    type: boolean
+
+  snps,req_p1p2p3_quirk:
+    description:
+      When set, the core will always request for P1/P2/P3 transition sequence.
+    type: boolean
+
+  snps,del_p1p2p3_quirk:
+    description:
+      When set core will delay P1/P2/P3 until a certain amount of 8B10B errors
+      occur.
+    type: boolean
+
+  snps,del_phy_power_chg_quirk:
+    description: When set core will delay PHY power change from P0 to P1/P2/P3.
+    type: boolean
+
+  snps,lfps_filter_quirk:
+    description: When set core will filter LFPS reception.
+    type: boolean
+
+  snps,rx_detect_poll_quirk:
+    description:
+      when set core will disable a 400us delay to start Polling LFPS after
+      RX.Detect.
+    type: boolean
+
+  snps,tx_de_emphasis_quirk:
+    description: When set core will set Tx de-emphasis value
+    type: boolean
+
+  snps,tx_de_emphasis:
+    description:
+      The value driven to the PHY is controlled by the LTSSM during USB3
+      Compliance mode.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum:
+      - 0 # -6dB de-emphasis
+      - 1 # -3.5dB de-emphasis
+      - 2 # No de-emphasis
+
+  snps,dis_u3_susphy_quirk:
+    description: When set core will disable USB3 suspend phy
+    type: boolean
+
+  snps,dis_u2_susphy_quirk:
+    description: When set core will disable USB2 suspend phy
+    type: boolean
+
+  snps,dis_enblslpm_quirk:
+    description:
+      When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal
+      to the PHY.
+    type: boolean
+
+  snps,dis-u1-entry-quirk:
+    description: Set if link entering into U1 needs to be disabled
+    type: boolean
+
+  snps,dis-u2-entry-quirk:
+    description: Set if link entering into U2 needs to be disabled
+    type: boolean
+
+  snps,dis_rxdet_inp3_quirk:
+    description:
+      When set core will disable receiver detection in PHY P3 power state.
+    type: boolean
+
+  snps,dis-u2-freeclk-exists-quirk:
+    description:
+      When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2
+      PHY doesn't provide a free-running PHY clock.
+    type: boolean
+
+  snps,dis-del-phy-power-chg-quirk:
+    description:
+      When set core will change PHY power from P0 to P1/P2/P3 without delay.
+    type: boolean
+
+  snps,dis-tx-ipgap-linecheck-quirk:
+    description: When set, disable u2mac linestate check during HS transmit
+    type: boolean
+
+  snps,parkmode-disable-ss-quirk:
+    description:
+      When set, all SuperSpeed bus instances in park mode are disabled.
+    type: boolean
+
+  snps,dis_metastability_quirk:
+    description:
+      When set, disable metastability workaround. CAUTION! Use only if you are
+      absolutely sure of it.
+    type: boolean
+
+  snps,dis-split-quirk:
+    description:
+      When set, change the way URBs are handled by the driver. Needed to
+      avoid -EPROTO errors with usbhid on some devices (Hikey 970).
+    type: boolean
+
+  snps,gfladj-refclk-lpm-sel-quirk:
+    description:
+      When set, run the SOF/ITP counter based on ref_clk.
+    type: boolean
+
+  snps,resume-hs-terminations:
+    description:
+      Fix the issue of HS terminations CRC error on resume by enabling this
+      quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end
+      of resume. This option is to support certain legacy ULPI PHYs.
+    type: boolean
+
+  snps,is-utmi-l1-suspend:
+    description:
+      True when DWC3 asserts output signal utmi_l1_suspend_n, false when
+      asserts utmi_sleep_n.
+    type: boolean
+
+  snps,hird-threshold:
+    description: HIRD threshold
+    $ref: /schemas/types.yaml#/definitions/uint8
+
+  snps,hsphy_interface:
+    description:
+      High-Speed PHY interface selection between UTMI+ and ULPI when the
+      DWC_USB3_HSPHY_INTERFACE has value 3.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [utmi, ulpi]
+
+  snps,quirk-frame-length-adjustment:
+    description:
+      Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame
+      length adjustment when the fladj_30mhz_sdbnd signal is invalid or
+      incorrect.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x3f
+
+  snps,ref-clock-period-ns:
+    description:
+      Value for REFCLKPER field of GUCTL register for reference clock period in
+      nanoseconds, when the hardware set default does not match the actual
+      clock.
+
+      This binding is deprecated. Instead, provide an appropriate reference clock.
+    minimum: 8
+    maximum: 62
+    deprecated: true
+
+  snps,rx-thr-num-pkt-prd:
+    description:
+      Periodic ESS RX packet threshold count (host mode only). Set this and
+      snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
+      programming guide section 1.2.4) to enable periodic ESS RX threshold.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
+  snps,rx-max-burst-prd:
+    description:
+      Max periodic ESS RX burst size (host mode only). Set this and
+      snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
+      programming guide section 1.2.4) to enable periodic ESS RX threshold.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
+  snps,tx-thr-num-pkt-prd:
+    description:
+      Periodic ESS TX packet threshold count (host mode only). Set this and
+      snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
+      programming guide section 1.2.3) to enable periodic ESS TX threshold.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
+  snps,tx-max-burst-prd:
+    description:
+      Max periodic ESS TX burst size (host mode only). Set this and
+      snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
+      programming guide section 1.2.3) to enable periodic ESS TX threshold.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
+  tx-fifo-resize:
+    description: Determines if the TX fifos can be dynamically resized depending
+      on the number of IN endpoints used and if bursting is supported.  This
+      may help improve bandwidth on platforms with higher system latencies, as
+      increased fifo space allows for the controller to prefetch data into its
+      internal memory.
+    type: boolean
+
+  tx-fifo-max-num:
+    description: Specifies the max number of packets the txfifo resizing logic
+      can account for when higher endpoint bursting is used. (bMaxBurst > 6) The
+      higher the number, the more fifo space the txfifo resizing logic will
+      allocate for that endpoint.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 3
+
+  snps,incr-burst-type-adjustment:
+    description:
+      Value for INCR burst type of GSBUSCFG0 register, undefined length INCR
+      burst type enable and INCRx type. A single value means INCRX burst mode
+      enabled. If more than one value specified, undefined length INCR burst
+      type will be enabled with burst lengths utilized up to the maximum
+      of the values passed in this property.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    uniqueItems: true
+    items:
+      enum: [1, 4, 8, 16, 32, 64, 128, 256]
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      This port is used with the 'usb-role-switch' property  to connect the
+      dwc3 to type C connector.
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable USB remote wakeup.
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    usb@4a030000 {
+      compatible = "snps,dwc3";
+      reg = <0x4a030000 0xcfff>;
+      interrupts = <0 92 4>;
+      usb-phy = <&usb2_phy>, <&usb3_phy>;
+      snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+    };
+  - |
+    usb@4a000000 {
+      compatible = "snps,dwc3";
+      reg = <0x4a000000 0xcfff>;
+      interrupts = <0 92 4>;
+      clocks = <&clk 1>, <&clk 2>, <&clk 3>;
+      clock-names = "bus_early", "ref", "suspend";
+      phys = <&usb2_phy>, <&usb3_phy>;
+      phy-names = "usb2-phy", "usb3-phy";
+      snps,dis_u2_susphy_quirk;
+      snps,dis_enblslpm_quirk;
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
new file mode 100644
index 000000000000..b8974807b666
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/st,stusb160x.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STUSB160x Type-C controller bindings
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stusb1600
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: main power supply (4.1V-22V)
+
+  vsys-supply:
+    description: low power supply (3.0V-5.5V)
+
+  vconn-supply:
+    description: power supply (2.7V-5.5V) used to supply VConn on CC pin in
+      source or dual power role
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        const: usb-c-connector
+
+      power-role: true
+
+      typec-power-opmode: true
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c4 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec: stusb1600@28 {
+            compatible = "st,stusb1600";
+            reg = <0x28>;
+            vdd-supply = <&vbus_drd>;
+            vsys-supply = <&vdd_usb>;
+            interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpioi>;
+
+            typec_con: connector {
+                compatible = "usb-c-connector";
+                label = "USB-C";
+                power-role = "dual";
+                data-role = "dual";
+                typec-power-opmode = "default";
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                        reg = <0>;
+                        typec_con_ep: endpoint {
+                            remote-endpoint = <&usbotg_hs_ep>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
new file mode 100644
index 000000000000..1cb68cabe17d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/st,typec-stm32g0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32G0 USB Type-C PD controller
+
+description: |
+  The STM32G0 MCU can be programmed to control Type-C connector(s) through I2C
+  typically using the UCSI protocol over I2C, with a dedicated alert
+  (interrupt) pin.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32g0-typec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+  firmware-name:
+    description: |
+      Should contain the name of the default firmware image
+      file located on the firmware search path
+
+  wakeup-source: true
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      typec@53 {
+        compatible = "st,stm32g0-typec";
+        reg = <0x53>;
+        /* Alert pin on GPIO PE12 */
+        interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-parent = <&gpioe>;
+
+        /* Example with one type-C connector */
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+              reg = <0>;
+              con_usb_c_ep: endpoint {
+                remote-endpoint = <&usb_ep>;
+              };
+            };
+          };
+        };
+      };
+    };
+
+    usb {
+      usb-role-switch;
+      port {
+        usb_ep: endpoint {
+          remote-endpoint = <&con_usb_c_ep>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
new file mode 100644
index 000000000000..d25fc708e32c
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,am62-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI's AM62 wrapper module for the Synopsys USBSS-DRD controller
+
+maintainers:
+  - Aswath Govindraju <a-govindraju@ti.com>
+
+properties:
+  compatible:
+    const: ti,am62-usb
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  power-domains:
+    description:
+      PM domain provider node and an args specifier containing
+      the USB ISO device id value. See,
+      Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+    maxItems: 1
+
+  clocks:
+    description: Clock phandle to usb2_refclk
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref
+
+  ti,vbus-divider:
+    description:
+      Should be present if USB VBUS line is connected to the
+      VBUS pin of the SoC via a 1/3 voltage divider.
+    type: boolean
+
+  ti,syscon-phy-pll-refclk:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: USB phy control register offset within SYSCON
+    description:
+      Specifier for conveying frequency of ref clock input, for the
+      operation of USB2PHY.
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+    description: Required child node
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - clock-names
+  - ti,syscon-phy-pll-refclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      usbss1: usb@f910000 {
+        compatible = "ti,am62-usb";
+        reg = <0x00 0x0f910000 0x00 0x800>;
+        clocks = <&k3_clks 162 3>;
+        clock-names = "ref";
+        ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+        power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@31100000 {
+          compatible = "snps,dwc3";
+          reg =<0x00 0x31100000 0x00 0x50000>;
+          interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+                       <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+          interrupt-names = "host", "peripheral";
+          maximum-speed = "high-speed";
+          dr_mode = "otg";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
deleted file mode 100644
index 25780e945b15..000000000000
--- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-TI HD3SS3220 TypeC DRP Port Controller.
-
-Required properties:
- - compatible: Must be "ti,hd3ss3220".
- - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
- - interrupts: An interrupt specifier.
-
-Required sub-node:
- - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The
-   bindings of the connector node are specified in:
-
-	Documentation/devicetree/bindings/connector/usb-connector.txt
-
-Example:
-hd3ss3220@47 {
-	compatible = "ti,hd3ss3220";
-	reg = <0x47>;
-	interrupt-parent = <&gpio6>;
-	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-
-	connector {
-		compatible = "usb-c-connector";
-		label = "USB-C";
-		data-role = "dual";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-				hd3ss3220_ep: endpoint {
-					remote-endpoint = <&usb3_role_switch>;
-				};
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
new file mode 100644
index 000000000000..b86bf6bc9cd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,hd3ss3220.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI HD3SS3220 TypeC DRP Port Controller
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |-
+  HD3SS3220 is a USB SuperSpeed (SS) 2:1 mux with DRP port controller. The device provides Channel
+  Configuration (CC) logic and 5V VCONN sourcing for ecosystems implementing USB Type-C. The
+  HD3SS3220 can be configured as a Downstream Facing Port (DFP), Upstream Facing Port (UFP) or a
+  Dual Role Port (DRP) making it ideal for any application.
+
+properties:
+  compatible:
+    const: ti,hd3ss3220
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: OF graph bindings (specified in bindings/graph.txt) that model
+      SS data bus to the SS capable connector.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS) MUX inputs connected to SS capable connector.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output of 2:1 MUX connected to Super Speed (SS) data bus.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hd3ss3220@47 {
+                compatible = "ti,hd3ss3220";
+                reg = <0x47>;
+                interrupt-parent = <&gpio6>;
+                interrupts = <3>;
+
+                ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        port@0 {
+                                reg = <0>;
+                                hd3ss3220_in_ep: endpoint {
+                                        remote-endpoint = <&ss_ep>;
+                                };
+                        };
+                        port@1 {
+                                reg = <1>;
+                                hd3ss3220_out_ep: endpoint {
+                                        remote-endpoint = <&usb3_role_switch>;
+                                };
+                        };
+                };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
index 5f5264b2e9ad..eedde385d299 100644
--- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
@@ -7,21 +7,28 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Bindings for the TI wrapper module for the Cadence USBSS-DRD controller
 
 maintainers:
-  - Roger Quadros <rogerq@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 properties:
   compatible:
-    items:
+    oneOf:
       - const: ti,j721e-usb
+      - const: ti,am64-usb
+      - items:
+          - const: ti,j721e-usb
+          - const: ti,am64-usb
 
   reg:
-    description: module registers
+    maxItems: 1
+
+  ranges: true
 
   power-domains:
     description:
-       PM domain provider node and an args specifier containing
-       the USB device id value. See,
-       Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+      PM domain provider node and an args specifier containing
+      the USB device id value. See,
+      Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+    maxItems: 1
 
   clocks:
     description: Clock phandles to usb2_refclk and lpm_clk
@@ -46,6 +53,24 @@ properties:
       VBUS pin of the SoC via a 1/3 voltage divider.
     type: boolean
 
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+  dma-coherent: true
+
+patternProperties:
+  "^usb@":
+    type: object
+
 required:
   - compatible
   - reg
@@ -53,34 +78,42 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    cdns_usb@4104000 {
-          compatible = "ti,j721e-usb";
-          reg = <0x00 0x4104000 0x00 0x100>;
-          power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
-          clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
-          clock-names = "ref", "lpm";
-          assigned-clocks = <&k3_clks 288 15>;	/* USB2_REFCLK */
-          assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
-          #address-cells = <2>;
-          #size-cells = <2>;
-
-          usb@6000000 {
-                compatible = "cdns,usb3";
-                reg = <0x00 0x6000000 0x00 0x10000>,
-                      <0x00 0x6010000 0x00 0x10000>,
-                      <0x00 0x6020000 0x00 0x10000>;
-                reg-names = "otg", "xhci", "dev";
-                interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
-                             <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
-                             <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
-                interrupt-names = "host",
-                                  "peripheral",
-                                  "otg";
-                maximum-speed = "super-speed";
-                dr_mode = "otg";
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cdns_usb@4104000 {
+            compatible = "ti,j721e-usb";
+            reg = <0x00 0x4104000 0x00 0x100>;
+            power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
+            clock-names = "ref", "lpm";
+            assigned-clocks = <&k3_clks 288 15>;	/* USB2_REFCLK */
+            assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            usb@6000000 {
+                  compatible = "cdns,usb3";
+                  reg = <0x00 0x6000000 0x00 0x10000>,
+                        <0x00 0x6010000 0x00 0x10000>,
+                        <0x00 0x6020000 0x00 0x10000>;
+                  reg-names = "otg", "xhci", "dev";
+                  interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
+                               <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
+                               <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
+                  interrupt-names = "host",
+                                    "peripheral",
+                                    "otg";
+                  maximum-speed = "super-speed";
+                  dr_mode = "otg";
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
new file mode 100644
index 000000000000..c1f0194ad0d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,keystone-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Keystone Soc USB Controller
+
+maintainers:
+  - Roger Quadros <rogerq@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,keystone-dwc3
+          - ti,am654-dwc3
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+    description: Should contain a phandle to a PM domain provider node
+      and an args specifier containing the USB device id
+      value. This property is as per the binding,
+      Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+
+  phys:
+    maxItems: 1
+    description:
+      PHY specifier for the USB3.0 PHY. Some SoCs need the USB3.0 PHY
+      to be turned on before the controller.
+      Documentation/devicetree/bindings/phy/phy-bindings.txt
+
+  phy-names:
+    items:
+      - const: usb3-phy
+
+  dma-coherent: true
+
+  dma-ranges: true
+
+patternProperties:
+  "usb@[a-f0-9]+$":
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dwc3@2680000 {
+      compatible = "ti,keystone-dwc3";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      reg = <0x2680000 0x10000>;
+      clocks = <&clkusb>;
+      interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+      ranges;
+
+      usb@2690000 {
+        compatible = "snps,dwc3";
+        reg = <0x2690000 0x70000>;
+        interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+        usb-phy = <&usb_phy>, <&usb_phy>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
new file mode 100644
index 000000000000..a4c53b1f1af3
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/ti,tps6598x.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments 6598x Type-C Port Switch and Power Delivery controller DT bindings
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  Texas Instruments 6598x Type-C Port Switch and Power Delivery controller
+
+  A variant of this controller known as Apple CD321x or Apple ACE is also
+  present on hardware with Apple SoCs such as the M1.
+
+properties:
+  compatible:
+    enum:
+      - ti,tps6598x
+      - apple,cd321x
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: irq
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tps6598x: tps6598x@38 {
+            compatible = "ti,tps6598x";
+            reg = <0x38>;
+
+            interrupt-parent = <&msmgpio>;
+            interrupts = <107 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "irq";
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&typec_pins>;
+
+            typec_con: connector {
+                compatible = "usb-c-connector";
+                label = "USB-C";
+                port {
+                    typec_ep: endpoint {
+                        remote-endpoint = <&otg_ep>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
new file mode 100644
index 000000000000..e04fbd8ab0b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,usb8041.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for the TI USB8041 USB 3.0 hub controller
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb451,8140
+      - usb451,8142
+
+  reg: true
+
+  reset-gpios:
+    items:
+      - description: GPIO specifier for GRST# pin.
+
+  vdd-supply:
+    description:
+      VDD power supply to the hub
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+required:
+  - compatible
+  - reg
+  - peer-hub
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+          compatible = "usb451,8142";
+          reg = <1>;
+          peer-hub = <&hub_3_0>;
+          reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+          compatible = "usb451,8140";
+          reg = <2>;
+          peer-hub = <&hub_2_0>;
+          reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
index 0dd1469e7318..2082522b1c32 100644
--- a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
+++ b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
@@ -13,7 +13,7 @@ Required properties:
 Required sub-node:
 - connector: The "usb-c-connector" attached to the tcpci chip, the bindings
   of connector node are specified in
-  Documentation/devicetree/bindings/connector/usb-connector.txt
+  Documentation/devicetree/bindings/connector/usb-connector.yaml
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/usb/udc-xilinx.txt b/Documentation/devicetree/bindings/usb/udc-xilinx.txt
deleted file mode 100644
index 47b4e397a08d..000000000000
--- a/Documentation/devicetree/bindings/usb/udc-xilinx.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Xilinx USB2 device controller
-
-Required properties:
-- compatible		: Should be "xlnx,usb2-device-4.00.a"
-- reg			: Physical base address and size of the USB2
-			  device registers map.
-- interrupts		: Should contain single irq line of USB2 device
-			  controller
-- xlnx,has-builtin-dma	: if DMA is included
-
-Example:
- 		axi-usb2-device@42e00000 {
-                        compatible = "xlnx,usb2-device-4.00.a";
-                        interrupts = <0x0 0x39 0x1>;
-                        reg = <0x42e00000 0x10000>;
-                        xlnx,has-builtin-dma;
-                };
-
diff --git a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
deleted file mode 100644
index 3d05ae56cb0d..000000000000
--- a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-USB GPIO Based Connection Detection
-
-This is typically used to switch dual role mode from the USB ID pin connected
-to an input GPIO, and also used to enable/disable device mode from the USB
-Vbus pin connected to an input GPIO.
-
-Required properties:
-- compatible : should include "gpio-usb-b-connector" and "usb-b-connector".
-- id-gpios, vbus-gpios : input gpios, either one of them must be present,
-	and both can be present as well.
-	see connector/usb-connector.txt
-
-Optional properties:
-- vbus-supply : can be present if needed when supports dual role mode.
-	see connector/usb-connector.txt
-
-- Sub-nodes:
-	- port : can be present.
-		see graph.txt
-
-Example:
-
-&mtu3 {
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
-		vbus-supply = <&usb_p0_vbus>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
deleted file mode 100644
index 036be172b1ae..000000000000
--- a/Documentation/devicetree/bindings/usb/usb-device.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-Generic USB Device Properties
-
-Usually, we only use device tree for hard wired USB device.
-The reference binding doc is from:
-http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
-
-Four types of device-tree nodes are defined: "host-controller nodes"
-representing USB host controllers, "device nodes" representing USB devices,
-"interface nodes" representing USB interfaces and "combined nodes"
-representing simple USB devices.
-
-A combined node shall be used instead of a device node and an interface node
-for devices of class 0 or 9 (hub) with a single configuration and a single
-interface.
-
-A "hub node" is a combined node or an interface node that represents a USB
-hub.
-
-
-Required properties for device nodes:
-- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
-  The textual representation of VID and PID shall be in lower case hexadecimal
-  with leading zeroes suppressed. The other compatible strings from the above
-  standard binding could also be used, but a device adhering to this binding
-  may leave out all except for "usbVID,PID".
-- reg: the number of the USB hub port or the USB host-controller port to which
-  this device is attached. The range is 1-255.
-
-
-Required properties for device nodes with interface nodes:
-- #address-cells: shall be 2
-- #size-cells: shall be 0
-
-
-Required properties for interface nodes:
-- compatible: "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is
-  the product id, CN is the configuration value and IN is the interface
-  number. The textual representation of VID, PID, CN and IN shall be in lower
-  case hexadecimal with leading zeroes suppressed. The other compatible
-  strings from the above standard binding could also be used, but a device
-  adhering to this binding may leave out all except for
-  "usbifVID,PID.configCN.IN".
-- reg: the interface number and configuration value
-
-The configuration component is not included in the textual representation of
-an interface-node unit address for configuration 1.
-
-
-Required properties for combined nodes:
-- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
-  The textual representation of VID and PID shall be in lower case hexadecimal
-  with leading zeroes suppressed. The other compatible strings from the above
-  standard binding could also be used, but a device adhering to this binding
-  may leave out all except for "usbVID,PID".
-- reg: the number of the USB hub port or the USB host-controller port to which
-  this device is attached. The range is 1-255.
-
-
-Required properties for hub nodes with device nodes:
-- #address-cells: shall be 1
-- #size-cells: shall be 0
-
-
-Required properties for host-controller nodes with device nodes:
-- #address-cells: shall be 1
-- #size-cells: shall be 0
-
-
-Example:
-
-&usb1 {	/* host controller */
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hub@1 {		/* hub connected to port 1 */
-		compatible = "usb5e3,608";
-		reg = <1>;
-	};
-
-	device@2 {	/* device connected to port 2 */
-		compatible = "usb123,4567";
-		reg = <2>;
-	};
-
-	device@3 { 	/* device connected to port 3 */
-		compatible = "usb123,abcd";
-		reg = <3>;
-
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		interface@0 {	/* interface 0 of configuration 1 */
-			compatible = "usbif123,abcd.config1.0";
-			reg = <0 1>;
-		};
-
-		interface@0,2 {	/* interface 0 of configuration 2 */
-			compatible = "usbif123,abcd.config2.0";
-			reg = <0 2>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/usb/usb-device.yaml b/Documentation/devicetree/bindings/usb/usb-device.yaml
new file mode 100644
index 000000000000..b77960a7a37b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-device.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-device.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The device tree bindings for the Generic USB Device
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description: |
+  Usually, we only use device tree for hard wired USB device.
+  The reference binding doc is from:
+  http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
+
+  Four types of device-tree nodes are defined: "host-controller nodes"
+  representing USB host controllers, "device nodes" representing USB devices,
+  "interface nodes" representing USB interfaces and "combined nodes"
+  representing simple USB devices.
+
+  A combined node shall be used instead of a device node and an interface node
+  for devices of class 0 or 9 (hub) with a single configuration and a single
+  interface.
+
+  A "hub node" is a combined node or an interface node that represents a USB
+  hub.
+
+properties:
+  compatible:
+    pattern: "^usb[0-9a-f]{1,4},[0-9a-f]{1,4}$"
+    description: Device nodes or combined nodes.
+      "usbVID,PID", where VID is the vendor id and PID the product id.
+      The textual representation of VID and PID shall be in lower case
+      hexadecimal with leading zeroes suppressed. The other compatible
+      strings from the above standard binding could also be used,
+      but a device adhering to this binding may leave out all except
+      for "usbVID,PID".
+
+  reg:
+    description: the number of the USB hub port or the USB host-controller
+      port to which this device is attached. The range is 1-255.
+    maxItems: 1
+
+  "#address-cells":
+    description: should be 1 for hub nodes with device nodes,
+      should be 2 for device nodes with interface nodes.
+    enum: [1, 2]
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^interface@[0-9a-f]{1,2}(,[0-9a-f]{1,2})$":
+    type: object
+    description: USB interface nodes.
+      The configuration component is not included in the textual
+      representation of an interface-node unit address for configuration 1.
+
+    properties:
+      compatible:
+        pattern: "^usbif[0-9a-f]{1,4},[0-9a-f]{1,4}.config[0-9a-f]{1,2}.[0-9a-f]{1,2}$"
+        description: Interface nodes.
+          "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is
+          the product id, CN is the configuration value and IN is the interface
+          number. The textual representation of VID, PID, CN and IN shall be
+          in lower case hexadecimal with leading zeroes suppressed.
+          The other compatible strings from the above standard binding could
+          also be used, but a device adhering to this binding may leave out
+          all except for "usbifVID,PID.configCN.IN".
+
+      reg:
+        description: should be 2 cells long, the first cell represents
+          the interface number and the second cell represents the
+          configuration value.
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: true
+
+examples:
+  # hub connected to port 1
+  # device connected to port 2
+  # device connected to port 3
+  #    interface 0 of configuration 1
+  #    interface 0 of configuration 2
+  - |
+    usb@11270000 {
+        reg = <0x11270000 0x1000>;
+        interrupts = <0x0 0x4e 0x0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub@1 {
+            compatible = "usb5e3,608";
+            reg = <1>;
+        };
+
+        device@2 {
+            compatible = "usb123,4567";
+            reg = <2>;
+        };
+
+        device@3 {
+            compatible = "usb123,abcd";
+            reg = <3>;
+
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            interface@0 {
+                compatible = "usbif123,abcd.config1.0";
+                reg = <0 1>;
+            };
+
+            interface@0,2 {
+                compatible = "usbif123,abcd.config2.0";
+                reg = <0 2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/usb-drd.yaml b/Documentation/devicetree/bindings/usb/usb-drd.yaml
new file mode 100644
index 000000000000..1567549b05ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-drd.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-drd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic USB OTG Controller
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+properties:
+  otg-rev:
+    description:
+      Tells usb driver the release number of the OTG and EH supplement with
+      which the device and its descriptors are compliant, in binary-coded
+      decimal (i.e. 2.0 is 0200H). This property is used if any real OTG
+      features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be
+      0x0200 or above.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0x0100, 0x0120, 0x0130, 0x0200]
+
+  dr_mode:
+    description:
+      Tells Dual-Role USB controllers that we want to work on a particular
+      mode. In case this attribute isn't passed via DT, USB DRD controllers
+      should default to OTG.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, peripheral, otg]
+
+  hnp-disable:
+    description:
+      Tells OTG controllers we want to disable OTG HNP. Normally HNP is the
+      basic function of real OTG except you want it to be a srp-capable only B
+      device.
+    type: boolean
+
+  srp-disable:
+    description:
+      Tells OTG controllers we want to disable OTG SRP. SRP is optional for OTG
+      device.
+    type: boolean
+
+  adp-disable:
+    description:
+      Tells OTG controllers we want to disable OTG ADP. ADP is optional for OTG
+      device.
+    type: boolean
+
+  usb-role-switch:
+    description:
+      Indicates that the device is capable of assigning the USB data role
+      (USB host or USB device) for a given USB connector, such as Type-C,
+      Type-B(micro). See connector/usb-connector.yaml.
+
+  role-switch-default-mode:
+    description:
+      Indicates if usb-role-switch is enabled, the device default operation
+      mode of controller while usb role is USB_ROLE_NONE.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, peripheral]
+    default: peripheral
+
+additionalProperties: true
+
+examples:
+  - |
+    usb@4a030000 {
+        compatible = "snps,dwc3";
+        reg = <0x4a030000 0xcfff>;
+        interrupts = <0 92 4>;
+        usb-phy = <&usb2_phy>, <&usb3_phy>;
+        maximum-speed = "super-speed";
+        dr_mode = "otg";
+        phy_type = "utmi_wide";
+        otg-rev = <0x0200>;
+        adp-disable;
+    };
diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
index 7263b7f2b510..692dd60e3f73 100644
--- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -4,27 +4,49 @@
 $id: http://devicetree.org/schemas/usb/usb-hcd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic USB Host Controller Device Tree Bindings
+title: Generic USB Host Controller
 
 maintainers:
   - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 
+allOf:
+  - $ref: usb.yaml#
+
 properties:
-  $nodename:
-    pattern: "^usb(@.*)?"
+  companion:
+    description: Phandle of a companion device
+    $ref: /schemas/types.yaml#/definitions/phandle
 
-  phys:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
+  tpl-support:
     description:
-      List of all the USB PHYs on this HCD
+      Indicates if the Targeted Peripheral List is supported for given
+      targeted hosts (non-PC hosts).
+    type: boolean
 
-  phy-names:
-    description:
-      Name specifier for the USB PHY
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^.*@[0-9a-f]{1,2}$":
+    description: The hard wired USB devices
+    type: object
+    $ref: /schemas/usb/usb-device.yaml
+
+additionalProperties: true
 
 examples:
   - |
     usb {
         phys = <&usb2_phy1>, <&usb3_phy1>;
         phy-names = "usb";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub@1 {
+            compatible = "usb5e3,610";
+            reg = <1>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
deleted file mode 100644
index 4dc6a8ee3071..000000000000
--- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-USB NOP PHY
-
-Required properties:
-- compatible: should be usb-nop-xceiv
-- #phy-cells: Must be 0
-
-Optional properties:
-- clocks: phandle to the PHY clock. Use as per Documentation/devicetree
-  /bindings/clock/clock-bindings.txt
-  This property is required if clock-frequency is specified.
-
-- clock-names: Should be "main_clk"
-
-- clock-frequency: the clock frequency (in Hz) that the PHY clock must
-  be configured to.
-
-- vcc-supply: phandle to the regulator that provides power to the PHY.
-
-- reset-gpios: Should specify the GPIO for reset.
-
-- vbus-detect-gpio: should specify the GPIO detecting a VBus insertion
-                    (see Documentation/devicetree/bindings/gpio/gpio.txt)
-- vbus-regulator : should specifiy the regulator supplying current drawn from
-  the VBus line (see Documentation/devicetree/bindings/regulator/regulator.txt).
-
-Example:
-
-	hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		clock-frequency = <19200000>;
-		clocks = <&osc 0>;
-		clock-names = "main_clk";
-		vcc-supply = <&hsusb1_vcc_regulator>;
-		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-		vbus-regulator = <&vbus_regulator>;
-		#phy-cells = <0>;
-	};
-
-hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
-and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
-hsusb1_vcc_regulator provides power to the PHY and GPIO 7 controls RESET.
-GPIO 13 detects VBus insertion, and accordingly notifies the vbus-regulator.
diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml
new file mode 100644
index 000000000000..2824c17285ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-nop-xceiv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB NOP PHY
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    const: usb-nop-xceiv
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: main_clk
+
+  clock-frequency: true
+
+  '#phy-cells':
+    const: 0
+
+  vcc-supply:
+    description: phandle to the regulator that provides power to the PHY.
+
+  reset-gpios:
+    maxItems: 1
+
+  vbus-detect-gpio:
+    description: Should specify the GPIO detecting a VBus insertion
+    maxItems: 1
+
+  vbus-regulator:
+    description: Should specifiy the regulator supplying current drawn from
+      the VBus line.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    hsusb1_phy {
+        compatible = "usb-nop-xceiv";
+        clock-frequency = <19200000>;
+        clocks = <&osc 0>;
+        clock-names = "main_clk";
+        vcc-supply = <&hsusb1_vcc_regulator>;
+        reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+        vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+        vbus-regulator = <&vbus_regulator>;
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
deleted file mode 100644
index 3f378951d624..000000000000
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-USB xHCI controllers
-
-Required properties:
-  - compatible: should be one or more of
-
-    - "generic-xhci" for generic XHCI device
-    - "marvell,armada3700-xhci" for Armada 37xx SoCs
-    - "marvell,armada-375-xhci" for Armada 375 SoCs
-    - "marvell,armada-380-xhci" for Armada 38x SoCs
-    - "renesas,xhci-r8a7743" for r8a7743 SoC
-    - "renesas,xhci-r8a7744" for r8a7744 SoC
-    - "renesas,xhci-r8a774a1" for r8a774a1 SoC
-    - "renesas,xhci-r8a774b1" for r8a774b1 SoC
-    - "renesas,xhci-r8a774c0" for r8a774c0 SoC
-    - "renesas,xhci-r8a7790" for r8a7790 SoC
-    - "renesas,xhci-r8a7791" for r8a7791 SoC
-    - "renesas,xhci-r8a7793" for r8a7793 SoC
-    - "renesas,xhci-r8a7795" for r8a7795 SoC
-    - "renesas,xhci-r8a7796" for r8a7796 SoC
-    - "renesas,xhci-r8a77965" for r8a77965 SoC
-    - "renesas,xhci-r8a77990" for r8a77990 SoC
-    - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
-      device
-    - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 or RZ/G2 compatible
-      device
-    - "xhci-platform" (deprecated)
-
-    When compatible with the generic version, nodes must list the
-    SoC-specific version corresponding to the platform first
-    followed by the generic version.
-
-  - reg: should contain address and length of the standard XHCI
-    register set for the device.
-  - interrupts: one XHCI interrupt should be described here.
-
-Optional properties:
-  - clocks: reference to the clocks
-  - clock-names: mandatory if there is a second clock, in this case
-    the name must be "core" for the first clock and "reg" for the
-    second one
-  - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
-  - usb3-lpm-capable: determines if platform is USB3 LPM capable
-  - quirk-broken-port-ped: set if the controller has broken port disable mechanism
-  - imod-interval-ns: default interrupt moderation interval is 5000ns
-  - phys : see usb-hcd.yaml in the current directory
-
-additionally the properties from usb-hcd.yaml (in the current directory) are
-supported.
-
-
-Example:
-	usb@f0931000 {
-		compatible = "generic-xhci";
-		reg = <0xf0931000 0x8c8>;
-		interrupts = <0x0 0x4e 0x0>;
-	};
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.yaml b/Documentation/devicetree/bindings/usb/usb-xhci.yaml
new file mode 100644
index 000000000000..f2139a9f35fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-xhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic USB xHCI Controller
+
+maintainers:
+  - Mathias Nyman <mathias.nyman@intel.com>
+
+allOf:
+  - $ref: "usb-hcd.yaml#"
+
+properties:
+  usb2-lpm-disable:
+    description: Indicates if we don't want to enable USB2 HW LPM
+    type: boolean
+
+  usb3-lpm-capable:
+    description: Determines if platform is USB3 LPM capable
+    type: boolean
+
+  quirk-broken-port-ped:
+    description: Set if the controller has broken port disable mechanism
+    type: boolean
+
+  imod-interval-ns:
+    description: Interrupt moderation interval
+    default: 5000
+
+additionalProperties: true
+
+examples:
+  - |
+    usb@f0930000 {
+      compatible = "generic-xhci";
+      reg = <0xf0930000 0x8c8>;
+      interrupts = <0x0 0x4e 0x0>;
+      usb2-lpm-disable;
+      usb3-lpm-capable;
+    };
diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml
new file mode 100644
index 000000000000..326b14f05d1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic USB Controller
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+select: false
+
+properties:
+  $nodename:
+    pattern: "^usb(@.*)?"
+
+  phys:
+    description:
+      List of all the USB PHYs on this HCD
+
+  phy-names:
+    description:
+      Name specifier for the USB PHY
+
+  usb-phy:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      List of all the USB PHYs on this HCD to be accepted by the legacy USB
+      Physical Layer subsystem.
+    deprecated: true
+
+  phy_type:
+    description:
+      Tells USB controllers that we want to configure the core to support a
+      UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected, UTMI+ low
+      pin interface if ULPI is specified, Serial core/PHY interconnect if
+      serial is specified and High-Speed Inter-Chip feature if HSIC is
+      selected. In case this isn't passed via DT, USB controllers should
+      default to HW capability.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [utmi, utmi_wide, ulpi, serial, hsic]
+
+  maximum-speed:
+    description:
+      Tells USB controllers we want to work up to a certain speed. In case this
+      isn't passed via DT, USB controllers should default to their maximum HW
+      capability.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - low-speed
+      - full-speed
+      - high-speed
+      - super-speed
+      - super-speed-plus
+      - super-speed-plus-gen2x1
+      - super-speed-plus-gen1x2
+      - super-speed-plus-gen2x2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt
deleted file mode 100644
index 057dd384d473..000000000000
--- a/Documentation/devicetree/bindings/usb/usb3503.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-SMSC USB3503 High-Speed Hub Controller
-
-Required properties:
-- compatible: Should be "smsc,usb3503" or "smsc,usb3503a".
-
-Optional properties:
-- reg: Specifies the i2c slave address, it is required and should be 0x08
-       if I2C is used.
-- connect-gpios: Should specify GPIO for connect.
-- disabled-ports: Should specify the ports unused.
-	'1' or '2' or '3' are available for this property to describe the port
-	number. 1~3 property values are possible to be described.
-	Do not describe this property if all ports have to be enabled.
-- intn-gpios: Should specify GPIO for interrupt.
-- reset-gpios: Should specify GPIO for reset.
-- initial-mode: Should specify initial mode.
-                (1 for HUB mode, 2 for STANDBY mode)
-- refclk: Clock used for driving REFCLK signal (optional, if not provided
-	the driver assumes that clock signal is always available, its
-	rate is specified by REF_SEL pins and a value from the primary
-	reference clock frequencies table is used). Use clocks and
-	clock-names in order to assign it
-- refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL
-	pins (optional, if not provided, driver will not set rate of the
-	REFCLK signal and assume that a value from the primary reference
-	clock frequencies table is used)
-
-Examples:
-	usb3503@8 {
-		compatible = "smsc,usb3503";
-		reg = <0x08>;
-		connect-gpios = <&gpx3 0 1>;
-		disabled-ports = <2 3>;
-		intn-gpios = <&gpx3 4 1>;
-		reset-gpios = <&gpx3 5 1>;
-		initial-mode = <1>;
-		clocks = <&clks 80>;
-		clock-names = "refclk";
-	};
diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
index b353b9816487..b796836d2ce7 100644
--- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
+++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
@@ -1,7 +1,7 @@
 * Freescale i.MX non-core registers
 
 Required properties:
-- #index-cells: Cells used to descibe usb controller index. Should be <1>
+- #index-cells: Cells used to describe usb controller index. Should be <1>
 - compatible: Should be one of below:
 	"fsl,imx6q-usbmisc" for imx6q
 	"fsl,vf610-usbmisc" for Vybrid vf610
diff --git a/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml b/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml
new file mode 100644
index 000000000000..5aa4ffd67119
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/willsemi,wusb3801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WUSB3801 Type-C port controller DT bindings
+
+description:
+  The Will Semiconductor WUSB3801 is a USB Type-C port controller which
+  supports role and plug orientation detection using the CC pins. It is
+  compatible with the USB Type-C Cable and Connector Specification v1.2.
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+properties:
+  compatible:
+    enum:
+      - willsemi,wusb3801
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml#
+    unevaluatedProperties: false
+    description:
+      The managed USB Type-C connector. Since WUSB3801 does not support
+      Power Delivery, the node should have the "pd-disable" property.
+
+    properties:
+      compatible:
+        const: usb-c-connector
+
+    required:
+      - pd-disable
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      tcpc@60 {
+        compatible = "willsemi,wusb3801";
+        reg = <0x60>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+          vbus-supply = <&otg_switch>;
+          power-role = "dual";
+          try-power-role = "sink";
+          data-role = "dual";
+          typec-power-opmode = "default";
+          pd-disable;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml
new file mode 100644
index 000000000000..04c123c7252a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/xlnx,usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx udc controller
+
+maintainers:
+  - Manish Narani <manish.narani@xilinx.com>
+
+properties:
+  compatible:
+    const: xlnx,usb2-device-4.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  xlnx,has-builtin-dma:
+    description:
+      If present, hardware has dma capability.
+    type: boolean
+
+  clocks:
+    minItems: 1
+
+  clock-names:
+    const: s_axi_aclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    axi-usb2-device@42e00000 {
+        compatible = "xlnx,usb2-device-4.00.a";
+        interrupts = <0x0 0x39 0x1>;
+        reg = <0xee000000 0xc00>;
+        xlnx,has-builtin-dma;
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9e67944bec9c..6e323a380294 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -16,17 +16,29 @@ properties: {}
 patternProperties:
   # Prefixes which are not vendors, but followed the pattern
   # DO NOT ADD NEW PROPERTIES TO THIS LIST
-  "^(at25|devbus|dmacap|dsa|exynos|fsi[ab]|gpio-fan|gpio|gpmc|hdmi|i2c-gpio),.*": true
+  "^(at25|bm|devbus|dmacap|dsa|exynos|fsi[ab]|gpio-fan|gpio-key|gpio|gpmc|hdmi|i2c-gpio),.*": true
   "^(keypad|m25p|max8952|max8997|max8998|mpmc),.*": true
   "^(pinctrl-single|#pinctrl-single|PowerPC),.*": true
   "^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*": true
-  "^(simple-audio-card|simple-graph-card|st-plgpio|st-spics|ts),.*": true
+  "^(simple-audio-card|st-plgpio|st-spics|ts),.*": true
 
   # Keep list in alphabetical order.
+  "^100ask,.*":
+    description: Baiwen.com (100ask).
+  "^70mai,.*":
+    description: 70mai Co., Ltd.
+  "^8dev,.*":
+    description: 8devices, UAB
+  "^abb,.*":
+    description: ABB
   "^abilis,.*":
     description: Abilis Systems
   "^abracon,.*":
     description: Abracon Corporation
+  "^abt,.*":
+    description: ShenZhen Asia Better Technology Ltd.
+  "^acer,.*":
+    description: Acer Inc.
   "^acme,.*":
     description: Acme Systems srl
   "^actions,.*":
@@ -49,8 +61,14 @@ patternProperties:
     description: Advantech Corporation
   "^aeroflexgaisler,.*":
     description: Aeroflex Gaisler AB
+  "^aesop,.*":
+    description: AESOP Embedded Forum
+  "^airoha,.*":
+    description: Airoha
   "^al,.*":
     description: Annapurna Labs
+  "^alcatel,.*":
+    description: Alcatel
   "^allegro,.*":
     description: Allegro DVT
   "^allo,.*":
@@ -59,6 +77,10 @@ patternProperties:
     description: Allwinner Technology Co., Ltd.
   "^alphascale,.*":
     description: AlphaScale Integrated Circuits Systems, Inc.
+  "^alps,.*":
+    description: Alps Electric Co., Ltd.
+  "^alt,.*":
+    description: Altus-Escon-Company BV
   "^altr,.*":
     description: Altera Corp.
   "^amarula,.*":
@@ -73,6 +95,8 @@ patternProperties:
     description: Shenzhen Amediatech Technology Co., Ltd
   "^amlogic,.*":
     description: Amlogic, Inc.
+  "^ampere,.*":
+    description: Ampere Computing LLC
   "^ampire,.*":
     description: Ampire Co., Ltd.
   "^ams,.*":
@@ -81,12 +105,16 @@ patternProperties:
     description: AMS-Taos Inc.
   "^analogix,.*":
     description: Analogix Semiconductor, Inc.
+  "^anbernic,.*":
+    description: Anbernic
   "^andestech,.*":
     description: Andes Technology Corporation
   "^anvo,.*":
     description: Anvo-Systems Dresden GmbH
   "^apm,.*":
     description: Applied Micro Circuits Corporation (APM)
+  "^apple,.*":
+    description: Apple Inc.
   "^aptina,.*":
     description: Aptina Imaging
   "^arasan,.*":
@@ -111,10 +139,17 @@ patternProperties:
     description: Asahi Kasei Corp.
   "^asc,.*":
     description: All Sensors Corporation
+  "^asix,.*":
+    description: ASIX Electronics Corporation
   "^aspeed,.*":
     description: ASPEED Technology Inc.
+  "^asrock,.*":
+    description: ASRock Inc.
   "^asus,.*":
     description: AsusTek Computer Inc.
+  "^atheros,.*":
+    description: Qualcomm Atheros, Inc. (deprecated, use qca)
+    deprecated: true
   "^atlas,.*":
     description: Atlas Scientific LLC
   "^atmel,.*":
@@ -131,6 +166,8 @@ patternProperties:
     description: Shanghai AVIC Optoelectronics Co., Ltd.
   "^avnet,.*":
     description: Avnet, Inc.
+  "^awinic,.*":
+    description: Shanghai Awinic Technology Co., Ltd.
   "^axentia,.*":
     description: Axentia Technologies AB
   "^axis,.*":
@@ -139,12 +176,20 @@ patternProperties:
     description: Azoteq (Pty) Ltd
   "^azw,.*":
     description: Shenzhen AZW Technology Co., Ltd.
+  "^baikal,.*":
+    description: BAIKAL ELECTRONICS, JSC
   "^bananapi,.*":
     description: BIPAI KEJI LIMITED
+  "^beacon,.*":
+    description: Compass Electronics Group, LLC
+  "^beagle,.*":
+    description: BeagleBoard.org Foundation
   "^bhf,.*":
     description: Beckhoff Automation GmbH & Co. KG
   "^bitmain,.*":
     description: Bitmain Technologies
+  "^blutek,.*":
+    description: BluTek Power
   "^boe,.*":
     description: BOE Technology Group Co., Ltd.
   "^bosch,.*":
@@ -155,16 +200,26 @@ patternProperties:
     description: Shanghai Broadmobi Communication Technology Co.,Ltd.
   "^brcm,.*":
     description: Broadcom Corporation
+  "^bsh,.*":
+    description: BSH Hausgeraete GmbH
+  "^bticino,.*":
+    description: Bticino International
   "^buffalo,.*":
     description: Buffalo, Inc.
   "^bur,.*":
     description: B&R Industrial Automation GmbH
-  "^bticino,.*":
-    description: Bticino International
+  "^bytedance,.*":
+    description: ByteDance Ltd.
+  "^calamp,.*":
+    description: CalAmp Corp.
   "^calaosystems,.*":
     description: CALAO Systems SAS
   "^calxeda,.*":
     description: Calxeda
+  "^canaan,.*":
+    description: Canaan, Inc.
+  "^caninos,.*":
+    description: Caninos Loucos Program
   "^capella,.*":
     description: Capella Microsystems, Inc
   "^cascoda,.*":
@@ -177,14 +232,22 @@ patternProperties:
     description: Cadence Design Systems Inc.
   "^cdtech,.*":
     description: CDTech(H.K.) Electronics Limited
+  "^cellwise,.*":
+    description: CellWise Microelectronics Co., Ltd
   "^ceva,.*":
     description: Ceva, Inc.
+  "^checkpoint,.*":
+    description: Check Point Software Technologies Ltd.
+  "^chefree,.*":
+    description: Chefree Technology Corp.
   "^chipidea,.*":
     description: Chipidea, Inc
   "^chipone,.*":
     description: ChipOne
   "^chipspark,.*":
     description: ChipSPARK
+  "^chrontel,.*":
+    description: Chrontel, Inc.
   "^chrp,.*":
     description: Common Hardware Reference Platform
   "^chunghwa,.*":
@@ -195,6 +258,8 @@ patternProperties:
     description: Computadora Industrial Abierta Argentina
   "^cirrus,.*":
     description: Cirrus Logic, Inc.
+  "^cisco,.*":
+    description: Cisco Systems, Inc.
   "^cloudengines,.*":
     description: Cloud Engines, Inc.
   "^cnm,.*":
@@ -205,6 +270,10 @@ patternProperties:
     description: Colorful GRP, Shenzhen Xueyushi Technology Ltd.
   "^compulab,.*":
     description: CompuLab Ltd.
+  "^congatec,.*":
+    description: congatec GmbH
+  "^coreriver,.*":
+    description: CORERIVER Semiconductor Co.,Ltd.
   "^corpro,.*":
     description: Chengdu Corpro Technology Co., Ltd.
   "^cortina,.*":
@@ -221,10 +290,18 @@ patternProperties:
     description: Hangzhou C-SKY Microsystems Co., Ltd
   "^csq,.*":
     description: Shenzen Chuangsiqi Technology Co.,Ltd.
+  "^ctera,.*":
+    description: CTERA Networks Intl.
+  "^ctu,.*":
+    description: Czech Technical University in Prague
   "^cubietech,.*":
     description: Cubietech, Ltd.
+  "^cui,.*":
+    description: CUI Devices
   "^cypress,.*":
     description: Cypress Semiconductor Corporation
+  "^cyx,.*":
+    description: Shenzhen CYX Industrial Co., Ltd
   "^cznic,.*":
     description: CZ.NIC, z.s.p.o.
   "^dallas,.*":
@@ -233,12 +310,18 @@ patternProperties:
     description: DataImage, Inc.
   "^davicom,.*":
     description: DAVICOM Semiconductor, Inc.
+  "^dell,.*":
+    description: Dell Inc.
   "^delta,.*":
     description: Delta Electronics, Inc.
+  "^densitron,.*":
+    description: Densitron Technologies Ltd
   "^denx,.*":
     description: Denx Software Engineering
   "^devantech,.*":
     description: Devantech, Ltd.
+  "^dfi,.*":
+    description: DFI Inc.
   "^dh,.*":
     description: DH electronics GmbH
   "^difrnce,.*":
@@ -247,6 +330,8 @@ patternProperties:
     description: Digi International Inc.
   "^digilent,.*":
     description: Diglent, Inc.
+  "^diodes,.*":
+    description: Diodes, Inc.
   "^dioo,.*":
     description: Dioo Microcircuit Co., Ltd
   "^dlc,.*":
@@ -265,26 +350,46 @@ patternProperties:
     description: DPTechnics
   "^dragino,.*":
     description: Dragino Technology Co., Limited
+  "^ds,.*":
+    description: DaSheng, Inc.
   "^dserve,.*":
     description: dServe Technology B.V.
+  "^dynaimage,.*":
+    description: Dyna-Image
   "^ea,.*":
     description: Embedded Artists AB
+  "^ebang,.*":
+    description: Zhejiang Ebang Communication Co., Ltd
+  "^ebbg,.*":
+    description: EBBG
   "^ebs-systart,.*":
     description: EBS-SYSTART GmbH
   "^ebv,.*":
     description: EBV Elektronik
   "^eckelmann,.*":
     description: Eckelmann AG
+  "^edimax,.*":
+    description: EDIMAX Technology Co., Ltd
   "^edt,.*":
     description: Emerging Display Technologies
   "^eeti,.*":
     description: eGalax_eMPIA Technology Inc
   "^einfochips,.*":
     description: Einfochips
+  "^eink,.*":
+    description: E Ink Corporation
   "^elan,.*":
     description: Elan Microelectronic Corp.
+  "^element14,.*":
+    description: Element14 (A Premier Farnell Company)
   "^elgin,.*":
     description: Elgin S/A.
+  "^elida,.*":
+    description: Shenzhen Elida Technology Co., Ltd.
+  "^elimo,.*":
+    description: Elimo Engineering Ltd.
+  "^elpida,.*":
+    description: Elpida Memory, Inc.
   "^embest,.*":
     description: Shenzhen Embest Technology Co., Ltd.
   "^emlid,.*":
@@ -295,12 +400,18 @@ patternProperties:
     description: Empire Electronix
   "^emtrion,.*":
     description: emtrion GmbH
+  "^enclustra,.*":
+    description: Enclustra GmbH
   "^endless,.*":
     description: Endless Mobile, Inc.
+  "^ene,.*":
+    description: ENE Technology, Inc.
   "^energymicro,.*":
     description: Silicon Laboratories (formerly Energy Micro AS)
   "^engicam,.*":
     description: Engicam S.r.l.
+  "^engleder,.*":
+    description: Engleder
   "^epcos,.*":
     description: EPCOS AG
   "^epfl,.*":
@@ -325,6 +436,8 @@ patternProperties:
     description: Exar Corporation
   "^excito,.*":
     description: Excito
+  "^exegin,.*":
+    description: Exegin Technologies Limited
   "^ezchip,.*":
     description: EZchip Semiconductor
   "^facebook,.*":
@@ -337,18 +450,28 @@ patternProperties:
     description: Fastrax Oy
   "^fcs,.*":
     description: Fairchild Semiconductor
+  "^feixin,.*":
+    description: Shenzhen Feixin Photoelectic Co., Ltd
   "^feiyang,.*":
     description: Shenzhen Fly Young Technology Co.,LTD.
+  "^fii,.*":
+    description: Foxconn Industrial Internet
   "^firefly,.*":
     description: Firefly
   "^focaltech,.*":
     description: FocalTech Systems Co.,Ltd
+  "^forlinx,.*":
+    description: Baoding Forlinx Embedded Technology Co., Ltd.
+  "^frida,.*":
+    description: Shenzhen Frida LCD Co., Ltd.
   "^friendlyarm,.*":
     description: Guangzhou FriendlyARM Computer Tech Co., Ltd
   "^fsl,.*":
     description: Freescale Semiconductor
   "^fujitsu,.*":
     description: Fujitsu Ltd.
+  "^fxtec,.*":
+    description: FX Technology Ltd.
   "^gardena,.*":
     description: GARDENA GmbH
   "^gateworks,.*":
@@ -389,38 +512,63 @@ patternProperties:
     description: Gumstix, Inc.
   "^gw,.*":
     description: Gateworks Corporation
+                 use "gateworks" vendor prefix
+    deprecated: true
   "^hannstar,.*":
     description: HannStar Display Corporation
+  "^haochuangyi,.*":
+    description: Shenzhen Haochuangyi Technology Co.,Ltd
   "^haoyu,.*":
     description: Haoyu Microelectronic Co. Ltd.
   "^hardkernel,.*":
     description: Hardkernel Co., Ltd
+  "^hechuang,.*":
+    description: Shenzhen Hechuang Intelligent Co.
   "^hideep,.*":
     description: HiDeep Inc.
   "^himax,.*":
     description: Himax Technologies, Inc.
+  "^hirschmann,.*":
+    description: Hirschmann Automation and Control GmbH
+  "^hisi,.*":
+    description: HiSilicon Limited (deprecated, use hisilicon)
+    deprecated: true
   "^hisilicon,.*":
-    description: Hisilicon Limited.
+    description: HiSilicon Limited.
   "^hit,.*":
     description: Hitachi Ltd.
   "^hitex,.*":
     description: Hitex Development Tools
   "^holt,.*":
     description: Holt Integrated Circuits, Inc.
+  "^honestar,.*":
+    description: Honestar Technologies Co., Ltd.
   "^honeywell,.*":
     description: Honeywell
   "^hoperun,.*":
     description: Jiangsu HopeRun Software Co., Ltd.
   "^hp,.*":
-    description: Hewlett Packard
+    description: Hewlett Packard Inc.
+  "^hpe,.*":
+    description: Hewlett Packard Enterprise
   "^hsg,.*":
     description: HannStar Display Co.
   "^holtek,.*":
     description: Holtek Semiconductor, Inc.
+  "^huawei,.*":
+    description: Huawei Technologies Co., Ltd.
   "^hugsun,.*":
     description: Shenzhen Hugsun Technology Co. Ltd.
   "^hwacom,.*":
     description: HwaCom Systems Inc.
+  "^hxt,.*":
+    description: HXT Semiconductor
+  "^hycon,.*":
+    description: Hycon Technology Corp.
+  "^hydis,.*":
+    description: Hydis Technologies
+  "^hynix,.*":
+    description: SK Hynix Inc.
   "^hyundai,.*":
     description: Hyundai Technology
   "^i2se,.*":
@@ -435,8 +583,12 @@ patternProperties:
     description: Ingenieurburo Fur Ic-Technologie (I/F/I)
   "^ilitek,.*":
     description: ILI Technology Corporation (ILITEK)
+  "^imagis,.*":
+    description: Imagis Technologies Co., Ltd.
   "^img,.*":
     description: Imagination Technologies Ltd.
+  "^imi,.*":
+    description: Integrated Micro-Electronics Inc.
   "^incircuit,.*":
     description: In-Circuit GmbH
   "^inet-tek,.*":
@@ -445,12 +597,20 @@ patternProperties:
     description: Infineon Technologies
   "^inforce,.*":
     description: Inforce Computing
+  "^ingrasys,.*":
+    description: Ingrasys Technology Inc.
+  "^ivo,.*":
+    description: InfoVision Optoelectronics Kunshan Co. Ltd.
   "^ingenic,.*":
     description: Ingenic Semiconductor
+  "^injoinic,.*":
+    description: Injoinic Technology Corp.
   "^innolux,.*":
     description: Innolux Corporation
   "^inside-secure,.*":
     description: INSIDE Secure
+  "^insignal,.*":
+    description: Insignal Ltd.
   "^inspur,.*":
     description: Inspur Corporation
   "^intel,.*":
@@ -459,6 +619,8 @@ patternProperties:
     description: Inter Control Group
   "^invensense,.*":
     description: InvenSense Inc.
+  "^inventec,.*":
+    description: Inventec
   "^inversepath,.*":
     description: Inverse Path
   "^iom,.*":
@@ -469,8 +631,12 @@ patternProperties:
     description: Intersil
   "^issi,.*":
     description: Integrated Silicon Solutions Inc.
+  "^ite,.*":
+    description: ITE Tech. Inc.
   "^itead,.*":
     description: ITEAD Intelligent Systems Co.Ltd
+  "^itian,.*":
+    description: ITian Corporation
   "^iwave,.*":
     description: iWave Systems Technologies Pvt. Ltd.
   "^jdi,.*":
@@ -479,8 +645,12 @@ patternProperties:
     description: JEDEC Solid State Technology Association
   "^jesurun,.*":
     description: Shenzhen Jesurun Electronics Business Dept.
+  "^jethome,.*":
+    description: JetHome (IP Sokolov P.A.)
   "^jianda,.*":
     description: Jiandangjing Technology Co., Ltd.
+  "^joz,.*":
+    description: JOZ BV
   "^kam,.*":
     description: Kamstrup A/S
   "^karo,.*":
@@ -503,12 +673,16 @@ patternProperties:
     description: Kionix, Inc.
   "^kobo,.*":
     description: Rakuten Kobo Inc.
+  "^kobol,.*":
+    description: Kobol Innovations Pte. Ltd.
   "^koe,.*":
     description: Kaohsiung Opto-Electronics Inc.
   "^kontron,.*":
     description: Kontron S&T AG
   "^kosagi,.*":
     description: Sutajio Ko-Usagi PTE Ltd.
+  "^kvg,.*":
+    description: Kverneland Group
   "^kyo,.*":
     description: Kyocera Corporation
   "^lacie,.*":
@@ -545,24 +719,40 @@ patternProperties:
     description: LinkSprite Technologies, Inc.
   "^linksys,.*":
     description: Belkin International, Inc. (Linksys)
+  "^linutronix,.*":
+    description: Linutronix GmbH
   "^linux,.*":
     description: Linux-specific binding
   "^linx,.*":
     description: Linx Technologies
+  "^liteon,.*":
+    description: LITE-ON Technology Corp.
+  "^litex,.*":
+    description: LiteX SoC builder
   "^lltc,.*":
     description: Linear Technology Corporation
   "^logicpd,.*":
     description: Logic PD, Inc.
+  "^logictechno,.*":
+    description: Logic Technologies Limited
   "^longcheer,.*":
     description: Longcheer Technology (Shanghai) Co., Ltd.
+  "^lontium,.*":
+    description: Lontium Semiconductor Corporation
   "^loongson,.*":
     description: Loongson Technology Corporation Limited
   "^lsi,.*":
     description: LSI Corp. (LSI Logic)
   "^lwn,.*":
     description: Liebherr-Werk Nenzing GmbH
+  "^lxa,.*":
+    description: Linux Automation GmbH
+  "^m5stack,.*":
+    description: M5Stack
   "^macnica,.*":
     description: Macnica Americas
+  "^mantix,.*":
+    description: Mantix Display Technology Co.,Ltd.
   "^mapleboard,.*":
     description: Mapleboard.org
   "^marvell,.*":
@@ -591,12 +781,20 @@ patternProperties:
     description: MELFAS Inc.
   "^mellanox,.*":
     description: Mellanox Technologies
+  "^memsensing,.*":
+    description: MEMSensing Microsystems Co., Ltd.
   "^memsic,.*":
     description: MEMSIC Inc.
   "^menlo,.*":
     description: Menlo Systems GmbH
+  "^mentor,.*":
+    description: Mentor Graphics
+  "^meraki,.*":
+    description: Cisco Meraki, LLC
   "^merrii,.*":
     description: Merrii Technology Co., Ltd.
+  "^methode,.*":
+    description: Methode Electronics, Inc.
   "^micrel,.*":
     description: Micrel Inc.
   "^microchip,.*":
@@ -607,8 +805,12 @@ patternProperties:
     description: Micron Technology Inc.
   "^microsoft,.*":
     description: Microsoft Corporation
+  "^microsys,.*":
+    description: MicroSys Electronics GmbH
   "^mikroe,.*":
     description: MikroElektronika d.o.o.
+  "^mikrotik,.*":
+    description: MikroTik
   "^miniand,.*":
     description: Miniand Tech
   "^minix,.*":
@@ -617,6 +819,16 @@ patternProperties:
     description: MiraMEMS Sensing Technology Co., Ltd.
   "^mitsubishi,.*":
     description: Mitsubishi Electric Corporation
+  "^mixel,.*":
+    description: Mixel, Inc.
+  "^miyoo,.*":
+    description: Miyoo
+  "^mntre,.*":
+    description: MNT Research GmbH
+  "^modtronix,.*":
+    description: Modtronix Engineering
+  "^moortec,.*":
+    description: Moortec Semiconductor Ltd.
   "^mosaixtech,.*":
     description: Mosaix Technologies, Inc.
   "^motorola,.*":
@@ -629,10 +841,15 @@ patternProperties:
     description: Monolithic Power Systems Inc.
   "^mqmaker,.*":
     description: mqmaker Inc.
+  "^mrvl,.*":
+    description: Marvell Technology Group Ltd.
+    deprecated: true
   "^mscc,.*":
     description: Microsemi Corporation
   "^msi,.*":
     description: Micro-Star International Co. Ltd.
+  "^mstar,.*":
+    description: MStar Semiconductor, Inc. (acquired by MediaTek Inc.)
   "^mti,.*":
     description: Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
   "^multi-inno,.*":
@@ -641,6 +858,9 @@ patternProperties:
     description: Mundo Reader S.L.
   "^murata,.*":
     description: Murata Manufacturing Co., Ltd.
+  "^mxic,.*":
+    description: Macronix International Co., Ltd.
+    deprecated: true
   "^mxicy,.*":
     description: Macronix International Co., Ltd.
   "^myir,.*":
@@ -657,8 +877,12 @@ patternProperties:
     description: Broadcom Corporation (formerly NetLogic Microsystems)
   "^netron-dy,.*":
     description: Netron DY
+  "^netronix,.*":
+    description: Netronix, Inc.
   "^netxeon,.*":
     description: Shenzhen Netxeon Technology CO., LTD
+  "^neweast,.*":
+    description: Guangdong Neweast Optoelectronics CO., LTD
   "^nexbox,.*":
     description: Nexbox
   "^nextthing,.*":
@@ -689,6 +913,10 @@ patternProperties:
     description: NXP Semiconductors
   "^oceanic,.*":
     description: Oceanic Systems (UK) Ltd.
+  "^ocs,.*":
+    description: Orient Chip Technology Co., Ltd.
+  "^oct,.*":
+    description: Octavo Systems LLC
   "^okaya,.*":
     description: Okaya Electric America, Inc.
   "^oki,.*":
@@ -697,6 +925,8 @@ patternProperties:
     description: OLIMEX Ltd.
   "^olpc,.*":
     description: One Laptop Per Child
+  "^oneplus,.*":
+    description: OnePlus Technology (Shenzhen) Co., Ltd.
   "^onion,.*":
     description: Onion Corporation
   "^onnn,.*":
@@ -705,8 +935,12 @@ patternProperties:
     description: On Tat Industrial Company
   "^opalkelly,.*":
     description: Opal Kelly Incorporated
+  "^openailab,.*":
+    description: openailab.com
   "^opencores,.*":
     description: OpenCores.org
+  "^openembed,.*":
+    description: OpenEmbed
   "^openrisc,.*":
     description: OpenRISC.io
   "^option,.*":
@@ -721,12 +955,18 @@ patternProperties:
     description: Ortus Technology Co., Ltd.
   "^osddisplays,.*":
     description: OSD Displays
+  "^osmc,.*":
+    description: Sam Nazarko Trading Ltd. (Open Source Media Centre)
+  "^ouya,.*":
+    description: Ouya Inc.
   "^overkiz,.*":
     description: Overkiz SAS
   "^ovti,.*":
     description: OmniVision Technologies
   "^oxsemi,.*":
     description: Oxford Semiconductor, Ltd.
+  "^ozzmaker,.*":
+    description: OzzMaker
   "^panasonic,.*":
     description: Panasonic Corporation
   "^parade,.*":
@@ -759,8 +999,12 @@ patternProperties:
     description: PLDA
   "^plx,.*":
     description: Broadcom Corporation (formerly PLX Technology)
+  "^ply,.*":
+    description: Plymovent Group BV
   "^pni,.*":
     description: PNI Sensor Corporation
+  "^pocketbook,.*":
+    description: PocketBook International SA
   "^polaroid,.*":
     description: Polaroid Corporation
   "^portwell,.*":
@@ -769,12 +1013,16 @@ patternProperties:
     description: Poslab Technology Co., Ltd.
   "^pov,.*":
     description: Point of View International B.V.
+  "^powertip,.*":
+    description: Powertip Tech. Corp.
   "^powervr,.*":
     description: PowerVR (deprecated, use img)
   "^primux,.*":
     description: Primux Trading, S.L.
   "^probox2,.*":
     description: PROBOX2 (by W2COMP Co., Ltd.)
+  "^prt,.*":
+    description: Protonic Holland
   "^pulsedlight,.*":
     description: PulsedLight, Inc
   "^purism,.*":
@@ -791,8 +1039,12 @@ patternProperties:
     description: Chengdu Kaixuan Information Technology Co., Ltd.
   "^qiaodian,.*":
     description: QiaoDian XianShi Corporation
+  "^qishenglong,.*":
+    description: Shenzhen QiShenglong Industrialist Co., Ltd.
   "^qnap,.*":
     description: QNAP Systems, Inc.
+  "^quanta,.*":
+    description: Quanta Computer Inc.
   "^radxa,.*":
     description: Radxa
   "^raidsonic,.*":
@@ -809,10 +1061,16 @@ patternProperties:
     description: Unisoc Communications, Inc.
   "^realtek,.*":
     description: Realtek Semiconductor Corp.
+  "^remarkable,.*":
+    description: reMarkable AS
   "^renesas,.*":
     description: Renesas Electronics Corporation
+  "^rex,.*":
+    description: iMX6 Rex Project
   "^rervision,.*":
     description: Shenzhen Rervision Technology Co., Ltd.
+  "^revotics,.*":
+    description: Revolution Robotics, Inc. (Revotics)
   "^richtek,.*":
     description: Richtek Technology Corporation
   "^ricoh,.*":
@@ -821,6 +1079,8 @@ patternProperties:
     description: Rikomagic Tech Corp. Ltd
   "^riscv,.*":
     description: RISC-V Foundation
+  "^riot,.*":
+    description: Embest RIoT
   "^rockchip,.*":
     description: Fuzhou Rockchip Electronics Co., Ltd
   "^rocktech,.*":
@@ -831,6 +1091,8 @@ patternProperties:
     description: Ronbo Electronics
   "^roofull,.*":
     description: Shenzhen Roofull Technology Co, Ltd
+  "^roseapplepi,.*":
+    description: RoseapplePi.org
   "^samsung,.*":
     description: Samsung Semiconductor
   "^samtec,.*":
@@ -847,24 +1109,36 @@ patternProperties:
     description: Schindler
   "^seagate,.*":
     description: Seagate Technology PLC
+  "^seeed,.*":
+    description: Seeed Technology Co., Ltd
   "^seirobotics,.*":
     description: Shenzhen SEI Robotics Co., Ltd
   "^semtech,.*":
     description: Semtech Corporation
+  "^senseair,.*":
+    description: Senseair AB
   "^sensirion,.*":
     description: Sensirion AG
   "^sensortek,.*":
     description: Sensortek Technology Corporation
+  "^sercomm,.*":
+    description: Sercomm (Suzhou) Corporation
   "^sff,.*":
     description: Small Form Factor Committee
   "^sgd,.*":
     description: Solomon Goldentek Display Corporation
+  "^sgmicro,.*":
+    description: SG Micro Corp
   "^sgx,.*":
     description: SGX Sensortech
   "^sharp,.*":
     description: Sharp Corporation
+  "^shift,.*":
+    description: SHIFT GmbH
   "^shimafuji,.*":
     description: Shimafuji Electric, Inc.
+  "^shiratech,.*":
+    description: Shiratech Solutions
   "^si-en,.*":
     description: Si-En Technology Ltd.
   "^si-linux,.*":
@@ -879,18 +1153,28 @@ patternProperties:
     description: Silicon Image
   "^silabs,.*":
     description: Silicon Laboratories
+  "^silan,.*":
+    description: Hangzhou Silan Microelectronics Co., Ltd.
   "^silead,.*":
     description: Silead Inc.
   "^silergy,.*":
     description: Silergy Corp.
+  "^silex-insight,.*":
+    description: Silex Insight
+  "^siliconfile,.*":
+    description: Siliconfile Technologies lnc.
   "^siliconmitus,.*":
     description: Silicon Mitus, Inc.
+  "^siemens,.*":
+    description: Siemens AG
   "^simtek,.*":
     description: Cypress Semiconductor Corporation (Simtek Corporation)
   "^sinlinx,.*":
     description: Sinlinx Electronics Technology Co., LTD
   "^sinovoip,.*":
     description: SinoVoip Co., Ltd
+  "^sinowealth,.*":
+    description: SINO WEALTH Electronic Ltd.
   "^sipeed,.*":
     description: Shenzhen Sipeed Technology Co., Ltd.
   "^sirf,.*":
@@ -899,8 +1183,12 @@ patternProperties:
     description: Silicon Integrated Systems Corp.
   "^sitronix,.*":
     description: Sitronix Technology Corporation
+  "^skov,.*":
+    description: SKOV A/S
   "^skyworks,.*":
     description: Skyworks Solutions, Inc.
+  "^smartlabs,.*":
+    description: SmartLabs LLC
   "^smsc,.*":
     description: Standard Microsystems Corporation
   "^snps,.*":
@@ -917,12 +1205,23 @@ patternProperties:
     description: Sony Corporation
   "^spansion,.*":
     description: Spansion Inc.
+  "^sparkfun,.*":
+    description: SparkFun Electronics
+  "^spinalhdl,.*":
+    description: SpinalHDL
   "^sprd,.*":
     description: Spreadtrum Communications Inc.
+  "^ssi,.*":
+    description: SSI Computer Corp
   "^sst,.*":
     description: Silicon Storage Technology, Inc.
+  "^sstar,.*":
+    description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd.
+      (formerly part of MStar Semiconductor, Inc.)
   "^st,.*":
     description: STMicroelectronics
+  "^starfive,.*":
+    description: StarFive Technology Co. Ltd.
   "^starry,.*":
     description: Starry Electronic Technology (ShenZhen) Co., LTD
   "^startek,.*":
@@ -935,18 +1234,35 @@ patternProperties:
   "^st-ericsson,.*":
     description: ST-Ericsson
     deprecated: true
+  "^storlink,.*":
+    description: StorLink Semiconductors, Inc.
+  "^storm,.*":
+    description: Storm Semiconductor, Inc.
+  "^storopack,.*":
+    description: Storopack
   "^summit,.*":
     description: Summit microelectronics
   "^sunchip,.*":
     description: Shenzhen Sunchip Technology Co., Ltd
+  "^sundance,.*":
+    description: Sundance DSP Inc.
+  "^sunplus,.*":
+    description: Sunplus Technology Co., Ltd.
   "^SUNW,.*":
     description: Sun Microsystems, Inc
+  "^supermicro,.*":
+    description: Super Micro Computer, Inc.
+  "^silvaco,.*":
+    description: Silvaco, Inc.
   "^swir,.*":
     description: Sierra Wireless
   "^syna,.*":
     description: Synaptics Inc.
   "^synology,.*":
     description: Synology, Inc.
+  "^synopsys,.*":
+    description: Synopsys, Inc. (deprecated, use snps)
+    deprecated: true
   "^tbs,.*":
     description: TBS Technologies
   "^tbs-biometrics,.*":
@@ -955,20 +1271,34 @@ patternProperties:
     description: Trusted Computing Group
   "^tcl,.*":
     description: Toby Churchill Ltd.
+  "^tcs,.*":
+    description: Shenzhen City Tang Cheng Technology Co., Ltd.
+  "^tdo,.*":
+    description: Shangai Top Display Optoelectronics Co., Ltd
   "^technexion,.*":
     description: TechNexion
   "^technologic,.*":
     description: Technologic Systems
+  "^teltonika,.*":
+    description: Teltonika Networks
   "^tempo,.*":
     description: Tempo Semiconductor
   "^techstar,.*":
     description: Shenzhen Techstar Electronics Co., Ltd.
   "^terasic,.*":
     description: Terasic Inc.
+  "^tesla,.*":
+    description: Tesla, Inc.
   "^tfc,.*":
     description: Three Five Corp
+  "^thead,.*":
+    description: T-Head Semiconductor Co., Ltd.
   "^thine,.*":
     description: THine Electronics, Inc.
+  "^thingyjp,.*":
+    description: thingy.jp
+  "^thundercomm,.*":
+    description: Thundercomm Technology Co., Ltd.
   "^ti,.*":
     description: Texas Instruments
   "^tianma,.*":
@@ -979,9 +1309,13 @@ patternProperties:
     description: Tecon Microprocessor Technologies, LLC.
   "^topeet,.*":
     description: Topeet
+  "^topic,.*":
+    description: Topic Embedded Systems
   "^toppoly,.*":
     description: TPO (deprecated, use tpo)
     deprecated: true
+  "^topwise,.*":
+    description: Topwise Communication Co., Ltd.
   "^toradex,.*":
     description: Toradex AG
   "^toshiba,.*":
@@ -995,19 +1329,27 @@ patternProperties:
   "^tpo,.*":
     description: TPO
   "^tq,.*":
-    description: TQ Systems GmbH
+    description: TQ-Systems GmbH
+  "^traverse,.*":
+    description: Traverse Technologies Australia Pty Ltd
   "^tronfy,.*":
     description: Tronfy
   "^tronsmart,.*":
     description: Tronsmart
   "^truly,.*":
     description: Truly Semiconductors Limited
+  "^visionox,.*":
+    description: Visionox
+  "^team-source-display,.*":
+    description: Shenzhen Team Source Display Technology Co., Ltd. (TSD)
   "^tsd,.*":
     description: Theobroma Systems Design und Consulting GmbH
   "^tyan,.*":
     description: Tyan Computer Corporation
   "^u-blox,.*":
     description: u-blox
+  "^u-boot,.*":
+    description: U-Boot bootloader
   "^ucrobotics,.*":
     description: uCRobotics
   "^ubnt,.*":
@@ -1028,22 +1370,34 @@ patternProperties:
     description: Aigo Digital Technology Co., Ltd.
   "^v3,.*":
     description: V3 Semiconductor
+  "^vaisala,.*":
+    description: Vaisala
   "^vamrs,.*":
     description: Vamrs Ltd.
   "^variscite,.*":
     description: Variscite Ltd.
+  "^vdl,.*":
+    description: Van der Laan b.v.
+  "^vertexcom,.*":
+    description: Vertexcom Technologies, Inc.
   "^via,.*":
     description: VIA Technologies, Inc.
+  "^vicor,.*":
+    description: Vicor Corporation
   "^videostrong,.*":
     description: Videostrong Technology Co., Ltd.
   "^virtio,.*":
     description: Virtual I/O Device Specification, developed by the OASIS consortium
+  "^virtual,.*":
+    description: Used for virtual device without specific vendor.
   "^vishay,.*":
     description: Vishay Intertechnology, Inc
   "^vitesse,.*":
     description: Vitesse Semiconductor Corporation
   "^vivante,.*":
     description: Vivante Corporation
+  "^vivax,.*":
+    description: Vivax brand by M SAN Grupa d.o.o.
   "^vocore,.*":
     description: VoCore Studio
   "^voipac,.*":
@@ -1052,8 +1406,16 @@ patternProperties:
     description: Vision Optical Technology Co., Ltd.
   "^vxt,.*":
     description: VXT Ltd
+  "^wand,.*":
+    description: Wandbord (Technexion)
+  "^waveshare,.*":
+    description: Waveshare Electronics
   "^wd,.*":
     description: Western Digital Corp.
+  "^we,.*":
+    description: Würth Elektronik GmbH.
+  "^welltech,.*":
+    description: Welltech Computer Co., Limited.
   "^wetek,.*":
     description: WeTek Electronics, limited.
   "^wexler,.*":
@@ -1062,10 +1424,20 @@ patternProperties:
     description: Shenzhen whwave Electronics, Inc.
   "^wi2wi,.*":
     description: Wi2Wi, Inc.
+  "^wiligear,.*":
+    description: Wiligear, Ltd.
+  "^willsemi,.*":
+    description: Will Semiconductor Ltd.
   "^winbond,.*":
     description: Winbond Electronics corp.
+  "^wingtech,.*":
+    description: Wingtech Technology Co., Ltd.
+  "^winlink,.*":
+    description: WinLink Co., Ltd
   "^winstar,.*":
     description: Winstar Display Corp.
+  "^wirelesstag,.*":
+    description: Wireless Tag (qiming yunduan)
   "^wits,.*":
     description: Shenzhen Merrii Technology Co., Ltd. (WITS)
   "^wlf,.*":
@@ -1074,26 +1446,52 @@ patternProperties:
     description: Wondermedia Technologies, Inc.
   "^wobo,.*":
     description: Wobo
+  "^wanchanglong,.*":
+    description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd.
   "^x-powers,.*":
     description: X-Powers
+  "^xen,.*":
+    description: Xen Hypervisor
   "^xes,.*":
     description: Extreme Engineering Solutions (X-ES)
+  "^xiaomi,.*":
+    description: Xiaomi Technology Co., Ltd.
   "^xillybus,.*":
     description: Xillybus Ltd.
+  "^xingbangda,.*":
+    description: Shenzhen Xingbangda Display Technology Co., Ltd
   "^xinpeng,.*":
     description: Shenzhen Xinpeng Technology Co., Ltd
+  "^xiphera,.*":
+    description: Xiphera Ltd.
   "^xlnx,.*":
     description: Xilinx
+  "^xnano,.*":
+    description: Xnano
   "^xunlong,.*":
     description: Shenzhen Xunlong Software CO.,Limited
   "^xylon,.*":
     description: Xylon
+  "^yadro,.*":
+    description: YADRO
+  "^yamaha,.*":
+    description: Yamaha Corporation
+  "^yes-optoelectronics,.*":
+    description: Yes Optoelectronics Co.,Ltd.
+  "^yic,.*":
+    description: YIC System Co., Ltd.
+  "^ylm,.*":
+    description: Shenzhen Yangliming Electronic Technology Co., Ltd.
   "^yna,.*":
     description: YSH & ATIL
   "^yones-toptech,.*":
     description: Yones Toptech Co., Ltd.
+  "^ys,.*":
+    description: Shenzhen Yashi Changhua Intelligent Technology Co., Ltd.
   "^ysoft,.*":
     description: Y Soft Corporation a.s.
+  "^zealz,.*":
+    description: Zealz
   "^zarlink,.*":
     description: Zarlink Semiconductor
   "^zeitec,.*":
@@ -1102,6 +1500,10 @@ patternProperties:
     description: Shenzhen Zidoo Technology Co., Ltd.
   "^zii,.*":
     description: Zodiac Inflight Innovations
+  "^zinitix,.*":
+    description: Zinitix Co., Ltd
+  "^zkmagic,.*":
+    description: Shenzhen Zkmagic Technology Co., Ltd.
   "^zte,.*":
     description: ZTE Corp.
   "^zyxel,.*":
diff --git a/Documentation/devicetree/bindings/virtio/iommu.txt b/Documentation/devicetree/bindings/virtio/iommu.txt
deleted file mode 100644
index 2407fea0651c..000000000000
--- a/Documentation/devicetree/bindings/virtio/iommu.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* virtio IOMMU PCI device
-
-When virtio-iommu uses the PCI transport, its programming interface is
-discovered dynamically by the PCI probing infrastructure. However the
-device tree statically describes the relation between IOMMU and DMA
-masters. Therefore, the PCI root complex that hosts the virtio-iommu
-contains a child node representing the IOMMU device explicitly.
-
-Required properties:
-
-- compatible:	Should be "virtio,pci-iommu"
-- reg:		PCI address of the IOMMU. As defined in the PCI Bus
-		Binding reference [1], the reg property is a five-cell
-		address encoded as (phys.hi phys.mid phys.lo size.hi
-		size.lo). phys.hi should contain the device's BDF as
-		0b00000000 bbbbbbbb dddddfff 00000000. The other cells
-		should be zero.
-- #iommu-cells:	Each platform DMA master managed by the IOMMU is assigned
-		an endpoint ID, described by the "iommus" property [2].
-		For virtio-iommu, #iommu-cells must be 1.
-
-Notes:
-
-- DMA from the IOMMU device isn't managed by another IOMMU. Therefore the
-  virtio-iommu node doesn't have an "iommus" property, and is omitted from
-  the iommu-map property of the root complex.
-
-Example:
-
-pcie@10000000 {
-	compatible = "pci-host-ecam-generic";
-	...
-
-	/* The IOMMU programming interface uses slot 00:01.0 */
-	iommu0: iommu@0008 {
-		compatible = "virtio,pci-iommu";
-		reg = <0x00000800 0 0 0 0>;
-		#iommu-cells = <1>;
-	};
-
-	/*
-	 * The IOMMU manages all functions in this PCI domain except
-	 * itself. Omit BDF 00:01.0.
-	 */
-	iommu-map = <0x0 &iommu0 0x0 0x8>
-		    <0x9 &iommu0 0x9 0xfff7>;
-};
-
-pcie@20000000 {
-	compatible = "pci-host-ecam-generic";
-	...
-	/*
-	 * The IOMMU also manages all functions from this domain,
-	 * with endpoint IDs 0x10000 - 0x1ffff
-	 */
-	iommu-map = <0x0 &iommu0 0x10000 0x10000>;
-};
-
-ethernet@fe001000 {
-	...
-	/* The IOMMU manages this platform device with endpoint ID 0x20000 */
-	iommus = <&iommu0 0x20000>;
-};
-
-[1] Documentation/devicetree/bindings/pci/pci.txt
-[2] Documentation/devicetree/bindings/iommu/iommu.txt
diff --git a/Documentation/devicetree/bindings/virtio/mmio.txt b/Documentation/devicetree/bindings/virtio/mmio.txt
deleted file mode 100644
index 21af30fbb81f..000000000000
--- a/Documentation/devicetree/bindings/virtio/mmio.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* virtio memory mapped device
-
-See http://ozlabs.org/~rusty/virtio-spec/ for more details.
-
-Required properties:
-
-- compatible:	"virtio,mmio" compatibility string
-- reg:		control registers base address and size including configuration space
-- interrupts:	interrupt generated by the device
-
-Required properties for virtio-iommu:
-
-- #iommu-cells:	When the node corresponds to a virtio-iommu device, it is
-		linked to DMA masters using the "iommus" or "iommu-map"
-		properties [1][2]. #iommu-cells specifies the size of the
-		"iommus" property. For virtio-iommu #iommu-cells must be
-		1, each cell describing a single endpoint ID.
-
-Optional properties:
-
-- iommus:	If the device accesses memory through an IOMMU, it should
-		have an "iommus" property [1]. Since virtio-iommu itself
-		does not access memory through an IOMMU, the "virtio,mmio"
-		node cannot have both an "#iommu-cells" and an "iommus"
-		property.
-
-Example:
-
-	virtio_block@3000 {
-		compatible = "virtio,mmio";
-		reg = <0x3000 0x100>;
-		interrupts = <41>;
-
-		/* Device has endpoint ID 23 */
-		iommus = <&viommu 23>
-	}
-
-	viommu: iommu@3100 {
-		compatible = "virtio,mmio";
-		reg = <0x3100 0x100>;
-		interrupts = <42>;
-
-		#iommu-cells = <1>
-	}
-
-[1] Documentation/devicetree/bindings/iommu/iommu.txt
-[2] Documentation/devicetree/bindings/pci/pci-iommu.txt
diff --git a/Documentation/devicetree/bindings/virtio/mmio.yaml b/Documentation/devicetree/bindings/virtio/mmio.yaml
new file mode 100644
index 000000000000..0aa8433f0a5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/virtio/mmio.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/virtio/mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: virtio memory mapped devices
+
+maintainers:
+  - Jean-Philippe Brucker <jean-philippe@linaro.org>
+
+description:
+  See https://www.oasis-open.org/committees/tc_home.php?wg_abbrev=virtio for
+  more details.
+
+properties:
+  compatible:
+    const: virtio,mmio
+
+  reg:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  '#iommu-cells':
+    description: Required when the node corresponds to a virtio-iommu device.
+    const: 1
+
+  iommus:
+    description: Required for devices making accesses thru an IOMMU.
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: Required for setting irq of a virtio_mmio device as wakeup source.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    virtio@3000 {
+        compatible = "virtio,mmio";
+        reg = <0x3000 0x100>;
+        interrupts = <41>;
+
+        /* Device has endpoint ID 23 */
+        iommus = <&viommu 23>;
+    };
+
+    viommu: iommu@3100 {
+        compatible = "virtio,mmio";
+        reg = <0x3100 0x100>;
+        interrupts = <42>;
+
+        #iommu-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/virtio/pci-iommu.yaml b/Documentation/devicetree/bindings/virtio/pci-iommu.yaml
new file mode 100644
index 000000000000..972a785a42de
--- /dev/null
+++ b/Documentation/devicetree/bindings/virtio/pci-iommu.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/virtio/pci-iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: virtio-iommu device using the virtio-pci transport
+
+maintainers:
+  - Jean-Philippe Brucker <jean-philippe@linaro.org>
+
+description: |
+  When virtio-iommu uses the PCI transport, its programming interface is
+  discovered dynamically by the PCI probing infrastructure. However the
+  device tree statically describes the relation between IOMMU and DMA
+  masters. Therefore, the PCI root complex that hosts the virtio-iommu
+  contains a child node representing the IOMMU device explicitly.
+
+  DMA from the IOMMU device isn't managed by another IOMMU. Therefore the
+  virtio-iommu node doesn't have an "iommus" property, and is omitted from
+  the iommu-map property of the root complex.
+
+properties:
+  # If compatible is present, it should contain the vendor and device ID
+  # according to the PCI Bus Binding specification. Since PCI provides
+  # built-in identification methods, compatible is not actually required.
+  compatible:
+    oneOf:
+      - items:
+          - const: virtio,pci-iommu
+          - const: pci1af4,1057
+      - items:
+          - const: pci1af4,1057
+
+  reg:
+    description: |
+      PCI address of the IOMMU. As defined in the PCI Bus Binding
+      reference, the reg property is a five-cell address encoded as (phys.hi
+      phys.mid phys.lo size.hi size.lo). phys.hi should contain the device's
+      BDF as 0b00000000 bbbbbbbb dddddfff 00000000. The other cells should be
+      zero. See Documentation/devicetree/bindings/pci/pci.txt
+
+  '#iommu-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#iommu-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@40000000 {
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x0 0x40000000  0x0 0x1000000>;
+            ranges = <0x02000000 0x0 0x41000000  0x0 0x41000000  0x0 0x0f000000>;
+
+            /*
+             * The IOMMU manages all functions in this PCI domain except
+             * itself. Omit BDF 00:01.0.
+             */
+            iommu-map = <0x0 &iommu0 0x0 0x8
+                         0x9 &iommu0 0x9 0xfff7>;
+
+            /* The IOMMU programming interface uses slot 00:01.0 */
+            iommu0: iommu@1,0 {
+                compatible = "pci1af4,1057";
+                reg = <0x800 0 0 0 0>;
+                #iommu-cells = <1>;
+            };
+        };
+
+        pcie@50000000 {
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x0 0x50000000  0x0 0x1000000>;
+            ranges = <0x02000000 0x0 0x51000000  0x0 0x51000000  0x0 0x0f000000>;
+
+            /*
+             * The IOMMU also manages all functions from this domain,
+             * with endpoint IDs 0x10000 - 0x1ffff
+             */
+            iommu-map = <0x0 &iommu0 0x10000 0x10000>;
+        };
+
+        ethernet {
+            /* The IOMMU manages this platform device with endpoint ID 0x20000 */
+            iommus = <&iommu0 0x20000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/virtio/virtio-device.yaml b/Documentation/devicetree/bindings/virtio/virtio-device.yaml
new file mode 100644
index 000000000000..1778ea9b5aa5
--- /dev/null
+++ b/Documentation/devicetree/bindings/virtio/virtio-device.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/virtio/virtio-device.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtio device bindings
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description:
+  These bindings are applicable to virtio devices irrespective of the bus they
+  are bound to, like mmio or pci.
+
+# We need a select here so we don't match all nodes with 'virtio,mmio'
+properties:
+  compatible:
+    pattern: "^virtio,device[0-9a-f]{1,8}$"
+    description: Virtio device nodes.
+      "virtio,deviceID", where ID is the virtio device id. The textual
+      representation of ID shall be in lower case hexadecimal with leading
+      zeroes suppressed.
+
+required:
+  - compatible
+
+additionalProperties: true
+
+examples:
+  - |
+    virtio@3000 {
+        compatible = "virtio,mmio";
+        reg = <0x3000 0x100>;
+        interrupts = <43>;
+
+        i2c {
+            compatible = "virtio,device22";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt b/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt
deleted file mode 100644
index cbaa6467ab2c..000000000000
--- a/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Freescale i.MX One wire bus master controller
-
-Required properties:
-- compatible : should be "fsl,imx21-owire"
-- reg : Address and length of the register set for the device
-
-Optional properties:
-- clocks : phandle of clock that supplies the module (required if platform
-		clock bindings use device tree)
-
-Example:
-
-- From imx53.dtsi:
-owire: owire@63fa4000 {
-	compatible = "fsl,imx53-owire", "fsl,imx21-owire";
-	reg = <0x63fa4000 0x4000>;
-	clocks = <&clks 159>;
-};
diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml
new file mode 100644
index 000000000000..55adea827c34
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/fsl-imx-owire.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX One wire bus master controller
+
+maintainers:
+  - Martin Fuzzey <mfuzzey@parkeon.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx21-owire
+      - items:
+          - enum:
+              - fsl,imx27-owire
+              - fsl,imx50-owire
+              - fsl,imx51-owire
+              - fsl,imx53-owire
+          - const: fsl,imx21-owire
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    owire@63fa4000 {
+        compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+        reg = <0x63fa4000 0x4000>;
+        clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+    };
diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.txt b/Documentation/devicetree/bindings/w1/w1-gpio.txt
deleted file mode 100644
index 3d6554eac240..000000000000
--- a/Documentation/devicetree/bindings/w1/w1-gpio.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-w1-gpio devicetree bindings
-
-Required properties:
-
- - compatible: "w1-gpio"
- - gpios: one or two GPIO specs:
-		- the first one is used as data I/O pin
-		- the second one is optional. If specified, it is used as
-		  enable pin for an external pin pullup.
-
-Optional properties:
-
- - linux,open-drain: if specified, the data pin is considered in
-		     open-drain mode.
-
-Also refer to the generic w1.txt document.
-
-Examples:
-
-	onewire {
-		compatible = "w1-gpio";
-		gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-
-		battery {
-			// ...
-		};
-	};
diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.yaml b/Documentation/devicetree/bindings/w1/w1-gpio.yaml
new file mode 100644
index 000000000000..b02b02237082
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/w1-gpio.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/w1-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bitbanged GPIO 1-Wire Bus
+
+maintainers:
+  - Daniel Mack <zonque@gmail.com>
+
+properties:
+  compatible:
+    const: w1-gpio
+
+  gpios:
+    minItems: 1
+    items:
+      - description: Data I/O pin
+      - description: Enable pin for an external pull-up resistor
+
+  linux,open-drain:
+    type: boolean
+    description: >
+      If specified, the data pin is considered in open-drain mode.
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    onewire {
+        compatible = "w1-gpio";
+        gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index e8f226376108..026c2e5e77aa 100644
--- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/watchdog/allwinner,sun4i-a10-wdt.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Watchdog Device Tree Bindings
+title: Allwinner A10 Watchdog
 
 allOf:
   - $ref: "watchdog.yaml#"
@@ -19,20 +19,28 @@ properties:
       - const: allwinner,sun4i-a10-wdt
       - const: allwinner,sun6i-a31-wdt
       - items:
-          - const: allwinner,sun50i-a64-wdt
+          - enum:
+              - allwinner,sun50i-a64-wdt
+              - allwinner,sun50i-a100-wdt
+              - allwinner,sun50i-h6-wdt
+              - allwinner,sun50i-h616-wdt
+              - allwinner,sun50i-r329-wdt
+              - allwinner,sun50i-r329-wdt-reset
+              - allwinner,suniv-f1c100s-wdt
           - const: allwinner,sun6i-a31-wdt
+      - const: allwinner,sun20i-d1-wdt
       - items:
-          - const: allwinner,sun50i-h6-wdt
-          - const: allwinner,sun6i-a31-wdt
-      - items:
-          - const: allwinner,suniv-f1c100s-wdt
-          - const: allwinner,sun4i-a10-wdt
+          - const: allwinner,sun20i-d1-wdt-reset
+          - const: allwinner,sun20i-d1-wdt
 
   reg:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: 32 KHz input clock
+      - description: secondary clock source
 
   interrupts:
     maxItems: 1
@@ -43,6 +51,36 @@ required:
   - clocks
   - interrupts
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun20i-d1-wdt
+          - allwinner,sun20i-d1-wdt-reset
+          - allwinner,sun50i-r329-wdt
+          - allwinner,sun50i-r329-wdt-reset
+
+then:
+  properties:
+    clocks:
+      items:
+        - description: High-frequency oscillator input, divided internally
+        - description: Low-frequency oscillator input
+
+    clock-names:
+      items:
+        - const: hosc
+        - const: losc
+
+  required:
+    - clock-names
+
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
index 4ddae6feef3b..497d60408ea0 100644
--- a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Meson GXBB SoCs Watchdog timer
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 allOf:
   - $ref: watchdog.yaml#
@@ -31,6 +31,8 @@ required:
   - reg
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     watchdog@98d0 {
diff --git a/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml b/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
new file mode 100644
index 000000000000..e58c56a6fdf6
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/apple,wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC Watchdog
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-wdt
+          - apple,t6000-wdt
+      - const: apple,wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    wdt: watchdog@50000000 {
+        compatible = "apple,t8103-wdt", "apple,wdt";
+        reg = <0x50000000 0x4000>;
+        clocks = <&clk>;
+        interrupts = <AIC_IRQ 123 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/arm,sbsa-gwdt.yaml b/Documentation/devicetree/bindings/watchdog/arm,sbsa-gwdt.yaml
new file mode 100644
index 000000000000..6bfa46353c4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/arm,sbsa-gwdt.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/arm,sbsa-gwdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBSA (Server Base System Architecture) Generic Watchdog
+
+maintainers:
+  - Fu Wei <fu.wei@linaro.org>
+
+description: |
+  The SBSA Generic Watchdog Timer is used to force a reset of the system after
+  two stages of timeout have elapsed. A detailed definition of the watchdog
+  timer can be found in the ARM document: ARM-DEN-0029 - Server Base System
+  Architecture (SBSA)
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: arm,sbsa-gwdt
+
+  reg:
+    items:
+      - description: Watchdog control frame
+      - description: Refresh frame
+
+  interrupts:
+    description: The Watchdog Signal 0 (WS0) SPI (Shared Peripheral Interrupt)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    watchdog@2a440000 {
+        compatible = "arm,sbsa-gwdt";
+        reg = <0x2a440000 0x1000>,
+              <0x2a450000 0x1000>;
+        interrupts = <0 27 4>;
+        timeout-sec = <30>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt b/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
deleted file mode 100644
index bee6f1f0e41b..000000000000
--- a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-ARM AMBA Primecell SP805 Watchdog
-
-SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that
-can be used to identify the peripheral type, vendor, and revision.
-This value can be used for driver matching.
-
-As SP805 WDT is a primecell IP, it follows the base bindings specified in
-'arm/primecell.txt'
-
-Required properties:
-- compatible:  Should be "arm,sp805" & "arm,primecell"
-- reg:         Should contain location and length for watchdog timer register
-- clocks:      Clocks driving the watchdog timer hardware. This list should be
-               2 clocks. With 2 clocks, the order is wdog_clk, apb_pclk
-               wdog_clk can be equal to or be a sub-multiple of the apb_pclk
-               frequency
-- clock-names: Shall be "wdog_clk" for first clock and "apb_pclk" for the
-               second one
-
-Optional properties:
-- interrupts:  Should specify WDT interrupt number
-- timeout-sec: Should specify default WDT timeout in seconds. If unset, the
-               default timeout is determined by the driver
-
-Example:
-	watchdog@66090000 {
-		compatible = "arm,sp805", "arm,primecell";
-		reg = <0x66090000 0x1000>;
-		interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&wdt_clk>, <&apb_pclk>;
-		clock-names = "wdog_clk", "apb_pclk";
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
new file mode 100644
index 000000000000..a69cac8ec208
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/arm,sp805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM AMBA Primecell SP805 Watchdog
+
+maintainers:
+  - Viresh Kumar <vireshk@kernel.org>
+
+description: |+
+  The Arm SP805 IP implements a watchdog device, which triggers an interrupt
+  after a configurable time period. If that interrupt has not been serviced
+  when the next interrupt would be triggered, the reset signal is asserted.
+
+allOf:
+  - $ref: /schemas/watchdog/watchdog.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,sp805
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,sp805
+      - const: arm,primecell
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: |
+      Clocks driving the watchdog timer hardware. The first clock is used
+      for the actual watchdog counter. The second clock drives the register
+      interface.
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: wdog_clk
+      - const: apb_pclk
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    watchdog@66090000 {
+        compatible = "arm,sp805", "arm,primecell";
+        reg = <0x66090000 0x1000>;
+        interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&wdt_clk>, <&apb_pclk>;
+        clock-names = "wdog_clk", "apb_pclk";
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/arm,twd-wdt.yaml b/Documentation/devicetree/bindings/watchdog/arm,twd-wdt.yaml
new file mode 100644
index 000000000000..bb8901854222
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/arm,twd-wdt.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/arm,twd-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Timer-Watchdog Watchdog
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  ARM 11MP, Cortex-A5 and Cortex-A9 are often associated with a per-core
+  Timer-Watchdog (aka TWD), which provides both a per-cpu local timer
+  and watchdog.
+
+  The TWD is usually attached to a GIC to deliver its two per-processor
+  interrupts.
+
+properties:
+  compatible:
+    enum:
+      - arm,cortex-a9-twd-wdt
+      - arm,cortex-a5-twd-wdt
+      - arm,arm11mp-twd-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    watchdog@2c000620 {
+            compatible = "arm,arm11mp-twd-wdt";
+            reg = <0x2c000620 0x20>;
+            interrupts = <GIC_PPI 14 0xf01>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml b/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
new file mode 100644
index 000000000000..e3a1d79574e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/arm-smc-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Secure Monitor Call based watchdog
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+maintainers:
+  - Julius Werner <jwerner@chromium.org>
+
+properties:
+  compatible:
+    enum:
+      - arm,smc-wdt
+  arm,smc-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The ATF smc function id used by the firmware.
+      Defaults to 0x82003D06 if unset.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog {
+      compatible = "arm,smc-wdt";
+      arm,smc-id = <0x82003D06>;
+      timeout-sec = <15>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
index d78d4a8fb868..a8197632d6d2 100644
--- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
@@ -20,7 +20,7 @@ Optional properties:
    This is useful in situations where another watchdog engine on chip is
    to perform the reset.
 
-   If 'aspeed,reset-type=' is not specfied the default is to enable system
+   If 'aspeed,reset-type=' is not specified the default is to enable system
    reset.
 
    Reset types:
diff --git a/Documentation/devicetree/bindings/watchdog/atmel,at91sam9-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,at91sam9-wdt.yaml
new file mode 100644
index 000000000000..ad27bc518670
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel,at91sam9-wdt.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/atmel,at91sam9-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Watchdog Timers
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+properties:
+  compatible:
+    const: atmel,at91sam9260-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  atmel,max-heartbeat-sec:
+    description:
+      Should contain the maximum heartbeat value in seconds. This value
+      should be less or equal to 16. It is used to compute the WDV field.
+    maximum: 16
+
+  atmel,min-heartbeat-sec:
+    description:
+      Should contain the minimum heartbeat value in seconds. This value
+      must be smaller than the max-heartbeat-sec value. It is used to
+      compute the WDD field.
+    maximum: 16
+
+  atmel,watchdog-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Should be hardware or software.
+    oneOf:
+      - description:
+          Hardware watchdog uses the at91 watchdog reset.
+        const: hardware
+      - description: |
+          Software watchdog uses the watchdog interrupt
+          to trigger a software reset.
+        const: software
+    default: hardware
+
+  atmel,reset-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Should be proc or all. This is valid only when using hardware watchdog.
+    oneOf:
+      - description:
+          Assert peripherals and processor reset signals.
+        const: all
+      - description:
+          Assert the processor reset signal.
+        const: proc
+    default: all
+
+  atmel,disable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Should be present if you want to stop the watchdog.
+
+  atmel,idle-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Should be present if you want to stop the watchdog when
+      entering idle state.
+      CAUTION: This property should be used with care, it actually makes the
+      watchdog not counting when the CPU is in idle state, therefore the
+      watchdog reset time depends on mean CPU usage and will not reset at all
+      if the CPU stops working while it is in idle state, which is probably
+      not what you want.
+
+  atmel,dbg-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Should be present if you want to stop the watchdog when
+      entering debug state.
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - $ref: watchdog.yaml#
+  - if:
+      properties:
+        atmel,reset-type:
+          enum:
+            - all
+            - proc
+    then:
+      properties:
+        atmel,watchdog-type:
+          const: hardware
+
+dependencies:
+  atmel,reset-type: ['atmel,watchdog-type']
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    watchdog@fffffd40 {
+        compatible = "atmel,at91sam9260-wdt";
+        reg = <0xfffffd40 0x10>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+        clocks = <&clk32k>;
+        timeout-sec = <15>;
+        atmel,watchdog-type = "hardware";
+        atmel,reset-type = "all";
+        atmel,dbg-halt;
+        atmel,idle-halt;
+        atmel,max-heartbeat-sec = <16>;
+        atmel,min-heartbeat-sec = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
new file mode 100644
index 000000000000..a9635c03761c
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/atmel,sama5d4-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SAMA5D4 Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - atmel,sama5d4-wdt
+      - microchip,sam9x60-wdt
+      - microchip,sama7g5-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  atmel,watchdog-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: should be hardware or software.
+    oneOf:
+      - description:
+          Enable watchdog fault reset. A watchdog fault triggers
+          watchdog reset.
+        const: hardware
+      - description:
+          Enable watchdog fault interrupt. A watchdog fault asserts
+          watchdog interrupt.
+        const: software
+    default: hardware
+
+  atmel,idle-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      present if you want to stop the watchdog when the CPU is in idle state.
+      CAUTION: This property should be used with care, it actually makes the
+      watchdog not counting when the CPU is in idle state, therefore the
+      watchdog reset time depends on mean CPU usage and will not reset at all
+      if the CPU stop working while it is in idle state, which is probably
+      not what you want.
+
+  atmel,dbg-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      present if you want to stop the watchdog when the CPU is in debug state.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    watchdog@fc068640 {
+      compatible = "atmel,sama5d4-wdt";
+      reg = <0xfc068640 0x10>;
+      interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
+      timeout-sec = <10>;
+      atmel,watchdog-type = "hardware";
+      atmel,dbg-halt;
+      atmel,idle-halt;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
deleted file mode 100644
index 44727fcc2729..000000000000
--- a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* Atmel SAMA5D4 Watchdog Timer (WDT) Controller
-
-Required properties:
-- compatible: "atmel,sama5d4-wdt" or "microchip,sam9x60-wdt"
-- reg: base physical address and length of memory mapped region.
-
-Optional properties:
-- timeout-sec: watchdog timeout value (in seconds).
-- interrupts: interrupt number to the CPU.
-- atmel,watchdog-type: should be "hardware" or "software".
-	"hardware": enable watchdog fault reset. A watchdog fault triggers
-		    watchdog reset.
-	"software": enable watchdog fault interrupt. A watchdog fault asserts
-		    watchdog interrupt.
-- atmel,idle-halt: present if you want to stop the watchdog when the CPU is
-		   in idle state.
-	CAUTION: This property should be used with care, it actually makes the
-	watchdog not counting when the CPU is in idle state, therefore the
-	watchdog reset time depends on mean CPU usage and will not reset at all
-	if the CPU stop working while it is in idle state, which is probably
-	not what you want.
-- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is
-		  in debug state.
-
-Example:
-	watchdog@fc068640 {
-		compatible = "atmel,sama5d4-wdt";
-		reg = <0xfc068640 0x10>;
-		interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
-		timeout-sec = <10>;
-		atmel,watchdog-type = "hardware";
-		atmel,dbg-halt;
-		atmel,idle-halt;
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
deleted file mode 100644
index 711a880b3d3b..000000000000
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* Atmel Watchdog Timers
-
-** at91sam9-wdt
-
-Required properties:
-- compatible: must be "atmel,at91sam9260-wdt".
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- clocks: phandle to input clock.
-
-Optional properties:
-- timeout-sec: contains the watchdog timeout in seconds.
-- interrupts : Should contain WDT interrupt.
-- atmel,max-heartbeat-sec : Should contain the maximum heartbeat value in
-	seconds. This value should be less or equal to 16. It is used to
-	compute the WDV field.
-- atmel,min-heartbeat-sec : Should contain the minimum heartbeat value in
-	seconds. This value must be smaller than the max-heartbeat-sec value.
-	It is used to compute the WDD field.
-- atmel,watchdog-type : Should be "hardware" or "software". Hardware watchdog
-	use the at91 watchdog reset. Software watchdog use the watchdog
-	interrupt to trigger a software reset.
-- atmel,reset-type : Should be "proc" or "all".
-	"all" : assert peripherals and processor reset signals
-	"proc" : assert the processor reset signal
-	This is valid only when using "hardware" watchdog.
-- atmel,disable : Should be present if you want to disable the watchdog.
-- atmel,idle-halt : Should be present if you want to stop the watchdog when
-	entering idle state.
-	CAUTION: This property should be used with care, it actually makes the
-	watchdog not counting when the CPU is in idle state, therefore the
-	watchdog reset time depends on mean CPU usage and will not reset at all
-	if the CPU stop working while it is in idle state, which is probably
-	not what you want.
-- atmel,dbg-halt : Should be present if you want to stop the watchdog when
-	entering debug state.
-
-Example:
-	watchdog@fffffd40 {
-		compatible = "atmel,at91sam9260-wdt";
-		reg = <0xfffffd40 0x10>;
-		interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-		clocks = <&clk32k>;
-		timeout-sec = <15>;
-		atmel,watchdog-type = "hardware";
-		atmel,reset-type = "all";
-		atmel,dbg-halt;
-		atmel,idle-halt;
-		atmel,max-heartbeat-sec = <16>;
-		atmel,min-heartbeat-sec = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
deleted file mode 100644
index 84122270be8f..000000000000
--- a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-BCM7038 Watchdog timer
-
-Required properties:
-
-- compatible : should be "brcm,bcm7038-wdt"
-- reg : Specifies base physical address and size of the registers.
-
-Optional properties:
-
-- clocks: The clock running the watchdog. If no clock is found the
-	  driver will default to 27000000 Hz.
-
-Example:
-
-watchdog@f040a7e8 {
-	compatible = "brcm,bcm7038-wdt";
-	clocks = <&upg_fixed>;
-	reg = <0xf040a7e8 0x16>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
new file mode 100644
index 000000000000..a926809352b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/brcm,bcm7038-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM63xx and BCM7038 watchdog timer
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Justin Chen <justinpopo6@gmail.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6345-wdt
+      - brcm,bcm7038-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: >
+      The clock running the watchdog. If no clock is found the driver will
+      default to 27000000 Hz.
+
+unevaluatedProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    watchdog@f040a7e8 {
+      compatible = "brcm,bcm7038-wdt";
+      reg = <0xf040a7e8 0x16>;
+      clocks = <&upg_fixed>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
index 950e4fba8dbc..354314d854ef 100644
--- a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
@@ -10,6 +10,12 @@ Optional properties:
 - dlg,use-sw-pm: Add this property to disable the watchdog during suspend.
 	Only use this option if you can't use the watchdog automatic suspend
 	function during a suspend (see register CONTROL_B).
+- dlg,wdt-sd: Set what happens on watchdog timeout. If this bit is set the
+	watchdog timeout triggers SHUTDOWN, if cleared the watchdog triggers
+	POWERDOWN. Can be 0 or 1. Only use this option if you want to change the
+	default chip's OTP setting for WATCHDOG_SD bit. If this property is NOT
+	set the WATCHDOG_SD bit and on timeout watchdog behavior will match the
+	chip's OTP settings.
 
 Example: DA9062
 
diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
index e60b9a13bdcb..aa10b8ec36e2 100644
--- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
@@ -11,8 +11,8 @@ Optional properties:
 	   See clock-bindings.txt
 
 Documentation:
-Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
-Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+Davinci DM646x - https://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
+Keystone - https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt
deleted file mode 100644
index eb0914420c7c..000000000000
--- a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Synopsys Designware Watchdog Timer
-
-Required Properties:
-
-- compatible	: Should contain "snps,dw-wdt"
-- reg		: Base address and size of the watchdog timer registers.
-- clocks	: phandle + clock-specifier for the clock that drives the
-		watchdog timer.
-
-Optional Properties:
-
-- interrupts	: The interrupt used for the watchdog timeout warning.
-- resets	: phandle pointing to the system reset controller with
-		line index for the watchdog.
-
-Example:
-
-	watchdog0: wd@ffd02000 {
-		compatible = "snps,dw-wdt";
-		reg = <0xffd02000 0x1000>;
-		interrupts = <0 171 4>;
-		clocks = <&per_base_clk>;
-		resets = <&rst WDT0_RESET>;
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.txt b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.txt
deleted file mode 100644
index 9ecdb502e605..000000000000
--- a/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Faraday Technology FTWDT010 watchdog
-
-This is an IP part from Faraday Technology found in the Gemini
-SoCs and others.
-
-Required properties:
-- compatible : must be one of
-  "faraday,ftwdt010"
-  "cortina,gemini-watchdog", "faraday,ftwdt010"
-- reg : shall contain base register location and length
-- interrupts : shall contain the interrupt for the watchdog
-
-Optional properties:
-- timeout-sec : the default watchdog timeout in seconds.
-
-Example:
-
-watchdog@41000000 {
-	compatible = "faraday,ftwdt010";
-	reg = <0x41000000 0x1000>;
-	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.yaml b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.yaml
new file mode 100644
index 000000000000..6ecd429f76b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/faraday,ftwdt010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTWDT010 watchdog
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Corentin Labbe <clabbe@baylibre.com>
+
+description: |
+  This is an IP part from Faraday Technology found in the Gemini
+  SoCs and others.
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,ftwdt010
+      - items:
+          - enum:
+              - cortina,gemini-watchdog
+              - moxa,moxart-watchdog
+          - const: faraday,ftwdt010
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: PCLK
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    watchdog@41000000 {
+      compatible = "faraday,ftwdt010";
+      reg = <0x41000000 0x1000>;
+      interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+      timeout-sec = <5>;
+    };
+  - |
+    watchdog: watchdog@98500000 {
+      compatible = "moxa,moxart-watchdog", "faraday,ftwdt010";
+      reg = <0x98500000 0x10>;
+      clocks = <&clk_apb>;
+      clock-names = "PCLK";
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml
new file mode 100644
index 000000000000..f84c45d687d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/fsl,scu-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Watchdog bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8qxp-sc-wdt
+      - const: fsl,imx-sc-wdt
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog {
+        compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+        timeout-sec = <60>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
deleted file mode 100644
index adc6b76fcb3a..000000000000
--- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Freescale i.MX Watchdog Timer (WDT) Controller
-
-Required properties:
-- compatible : Should be "fsl,<soc>-wdt"
-- reg : Should contain WDT registers location and length
-- interrupts : Should contain WDT interrupt
-
-Optional properties:
-- big-endian: If present the watchdog device's registers are implemented
-  in big endian mode, otherwise in native mode(same with CPU), for more
-  detail please see: Documentation/devicetree/bindings/regmap/regmap.txt.
-- fsl,ext-reset-output: If present the watchdog device is configured to
-  assert its external reset (WDOG_B) instead of issuing a software reset.
-- timeout-sec : Contains the watchdog timeout in seconds
-
-Examples:
-
-wdt@73f98000 {
-	compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
-	reg = <0x73f98000 0x4000>;
-	interrupts = <58>;
-	big-endian;
-	timeout-sec = <20>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
new file mode 100644
index 000000000000..fb7695515be1
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/fsl-imx-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx21-wdt
+      - items:
+          - enum:
+              - fsl,imx25-wdt
+              - fsl,imx27-wdt
+              - fsl,imx31-wdt
+              - fsl,imx35-wdt
+              - fsl,imx50-wdt
+              - fsl,imx51-wdt
+              - fsl,imx53-wdt
+              - fsl,imx6q-wdt
+              - fsl,imx6sl-wdt
+              - fsl,imx6sll-wdt
+              - fsl,imx6sx-wdt
+              - fsl,imx6ul-wdt
+              - fsl,imx7d-wdt
+              - fsl,imx8mm-wdt
+              - fsl,imx8mn-wdt
+              - fsl,imx8mp-wdt
+              - fsl,imx8mq-wdt
+              - fsl,ls1012a-wdt
+              - fsl,ls1043a-wdt
+              - fsl,vf610-wdt
+          - const: fsl,imx21-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  fsl,ext-reset-output:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      If present, the watchdog device is configured to assert its
+      external reset (WDOG_B) instead of issuing a software reset.
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    watchdog@20bc000 {
+        compatible = "fsl,imx21-wdt";
+        reg = <0x020bc000 0x4000>;
+        interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_IPG>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt
deleted file mode 100644
index f902508d6cac..000000000000
--- a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Freescale i.MX7ULP Watchdog Timer (WDT) Controller
-
-Required properties:
-- compatible : Should be "fsl,imx7ulp-wdt"
-- reg : Should contain WDT registers location and length
-- interrupts : Should contain WDT interrupt
-- clocks: Should contain a phandle pointing to the gated peripheral clock.
-
-Optional properties:
-- timeout-sec : Contains the watchdog timeout in seconds
-
-Examples:
-
-wdog1: watchdog@403d0000 {
-	compatible = "fsl,imx7ulp-wdt";
-	reg = <0x403d0000 0x10000>;
-	interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-	assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-	assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
-	timeout-sec = <40>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml
new file mode 100644
index 000000000000..8562978aa0c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/fsl-imx7ulp-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx7ulp-wdt
+      - items:
+          - const: fsl,imx8ulp-wdt
+          - const: fsl,imx7ulp-wdt
+      - const: fsl,imx93-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  timeout-sec: true
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+
+    watchdog@403d0000 {
+        compatible = "fsl,imx7ulp-wdt";
+        reg = <0x403d0000 0x10000>;
+        interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
+        assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
+        assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+        timeout-sec = <40>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml b/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml
new file mode 100644
index 000000000000..1437ff8a122f
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/intel,keembay-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay SoC non-secure Watchdog Timer
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+
+properties:
+  compatible:
+    enum:
+      - intel,keembay-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: interrupt specifier for threshold interrupt line
+      - description: interrupt specifier for timeout interrupt line
+
+  interrupt-names:
+    items:
+      - const: threshold
+      - const: timeout
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #define KEEM_BAY_A53_TIM
+
+    watchdog: watchdog@2033009c {
+        compatible = "intel,keembay-wdt";
+        reg = <0x2033009c 0x10>;
+        interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "threshold", "timeout";
+        clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
new file mode 100644
index 000000000000..179272f74de5
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/kontron,sl28cpld-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Watchdog driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: kontron,sl28cpld-wdt
+
+  reg:
+    maxItems: 1
+
+  kontron,assert-wdt-timeout-pin:
+    description: The SMARC standard defines a WDT_TIME_OUT# pin. If this
+      property is set, this output will be pulsed when the watchdog bites
+      and the system resets.
+    type: boolean
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
new file mode 100644
index 000000000000..ab9641e845db
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/maxim,max63xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 63xx Watchdog Timers
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+maintainers:
+  - Marc Zyngier <maz@kernel.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - maxim,max6369
+      - maxim,max6370
+      - maxim,max6371
+      - maxim,max6372
+      - maxim,max6373
+      - maxim,max6374
+
+  reg:
+    description: This is a 1-byte memory-mapped address
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    wdt: watchdog@50000000 {
+        compatible = "maxim,max6369";
+        reg = <0x50000000 0x1>;
+        timeout-sec = <10>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mt7621-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mt7621-wdt.yaml
new file mode 100644
index 000000000000..b2b17fdf4e39
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/mediatek,mt7621-wdt.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/mediatek,mt7621-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink Watchdog Timers
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7621-wdt
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    watchdog@100 {
+      compatible = "mediatek,mt7621-wdt";
+      reg = <0x100 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml
new file mode 100644
index 000000000000..33794711c594
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/mstar,msc313e-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar Watchdog
+
+maintainers:
+  - Daniel Palmer <daniel@0x0f.com>
+  - Romain Perier <romain.perier@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mstar,msc313e-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@6000 {
+        compatible = "mstar,msc313e-wdt";
+        reg = <0x6000 0x1f>;
+        clocks = <&xtal_div2>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt b/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt
deleted file mode 100644
index c15ef0ef609f..000000000000
--- a/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Ralink Watchdog Timers
-
-Required properties:
-- compatible: must be "mediatek,mt7621-wdt"
-- reg: physical base address of the controller and length of the register range
-
-Example:
-
-	watchdog@100 {
-		compatible = "mediatek,mt7621-wdt";
-		reg = <0x100 0x10>;
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index 4dd36bd3f1ad..762c62e428ef 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -1,21 +1,31 @@
 Mediatek SoCs Watchdog timer
 
+The watchdog supports a pre-timeout interrupt that fires timeout-sec/2
+before the expiry.
+
 Required properties:
 
 - compatible should contain:
 	"mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701
-	"mediatek,mt2712-wdt", "mediatek,mt6589-wdt": for MT2712
+	"mediatek,mt2712-wdt": for MT2712
+	"mediatek,mt6582-wdt", "mediatek,mt6589-wdt": for MT6582
 	"mediatek,mt6589-wdt": for MT6589
 	"mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797
 	"mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
 	"mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623
 	"mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629
-	"mediatek,mt8183-wdt", "mediatek,mt6589-wdt": for MT8183
+	"mediatek,mt7986-wdt", "mediatek,mt6589-wdt": for MT7986
+	"mediatek,mt8183-wdt": for MT8183
+	"mediatek,mt8186-wdt", "mediatek,mt6589-wdt": for MT8186
 	"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
+	"mediatek,mt8192-wdt": for MT8192
+	"mediatek,mt8195-wdt", "mediatek,mt6589-wdt": for MT8195
 
 - reg : Specifies base physical address and size of the registers.
 
 Optional properties:
+- mediatek,disable-extrst: disable send output reset signal
+- interrupts: Watchdog pre-timeout (bark) interrupt.
 - timeout-sec: contains the watchdog timeout in seconds.
 - #reset-cells: Should be 1.
 
@@ -24,7 +34,9 @@ Example:
 watchdog: watchdog@10007000 {
 	compatible = "mediatek,mt8183-wdt",
 		     "mediatek,mt6589-wdt";
+	mediatek,disable-extrst;
 	reg = <0 0x10007000 0 0x100>;
+	interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
 	timeout-sec = <10>;
 	#reset-cells = <1>;
 };
diff --git a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
index 6d593003c933..866a958b8a2b 100644
--- a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
@@ -5,7 +5,9 @@ The watchdog supports a pre-timeout interrupt that fires 10ms before the
 expiry.
 
 Required properties:
-- compatible      : "nuvoton,npcm750-wdt" for NPCM750 (Poleg).
+- compatible      : "nuvoton,npcm750-wdt" for NPCM750 (Poleg), or
+                    "nuvoton,wpcm450-wdt" for WPCM450 (Hermon), or
+                    "nuvoton,npcm845-wdt" for NPCM845 (Arbel).
 - reg             : Offset and length of the register set for the device.
 - interrupts      : Contain the timer interrupt with flags for
                     falling edge.
diff --git a/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt b/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt
deleted file mode 100644
index c6ae9c9d5e3e..000000000000
--- a/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Xilinx AXI/PLB soft-core watchdog Device Tree Bindings
----------------------------------------------------------
-
-Required properties:
-- compatible		: Should be "xlnx,xps-timebase-wdt-1.00.a" or
-			  "xlnx,xps-timebase-wdt-1.01.a".
-- reg			: Physical base address and size
-
-Optional properties:
-- clocks		: Input clock specifier. Refer to common clock
-			  bindings.
-- clock-frequency	: Frequency of clock in Hz
-- xlnx,wdt-enable-once	: 0 - Watchdog can be restarted
-			  1 - Watchdog can be enabled just once
-- xlnx,wdt-interval	: Watchdog timeout interval in 2^<val> clock cycles,
-			  <val> is integer from 8 to 31.
-
-Example:
-axi-timebase-wdt@40100000 {
-	clock-frequency = <50000000>;
-	compatible = "xlnx,xps-timebase-wdt-1.00.a";
-	clocks = <&clkc 15>;
-	reg = <0x40100000 0x10000>;
-	xlnx,wdt-enable-once = <0x0>;
-	xlnx,wdt-interval = <0x1b>;
-} ;
diff --git a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt
deleted file mode 100644
index 6fb984f31982..000000000000
--- a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-QCOM PM8916 watchdog timer controller
-
-This pm8916 watchdog timer controller must be under pm8916-pon node.
-
-Required properties:
-- compatible: should be "qcom,pm8916-wdt"
-
-Optional properties :
-- interrupts : Watchdog pre-timeout (bark) interrupt.
-- timeout-sec : Watchdog timeout value in seconds.
-
-Example:
-
-	pm8916_0: pm8916@0 {
-		compatible = "qcom,pm8916", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-
-		pon@800 {
-			compatible = "qcom,pm8916-pon";
-			reg = <0x800>;
-
-			watchdog {
-				compatible = "qcom,pm8916-wdt";
-				interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
-				timeout-sec = <10>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml
new file mode 100644
index 000000000000..568eb8480fc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/qcom,pm8916-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8916 watchdog timer controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: qcom,pm8916-wdt
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@0 {
+        compatible = "qcom,pm8916", "qcom,spmi-pmic";
+        reg = <0x0 SPMI_USID>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pon@800 {
+            compatible = "qcom,pm8916-pon";
+            reg = <0x800>;
+            mode-bootloader = <0x2>;
+            mode-recovery = <0x1>;
+
+            watchdog {
+                compatible = "qcom,pm8916-wdt";
+                interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
+                timeout-sec = <60>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt b/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt
deleted file mode 100644
index 41aeaa2ff0f8..000000000000
--- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Qualcomm Krait Processor Sub-system (KPSS) Watchdog
----------------------------------------------------
-
-Required properties :
-- compatible : shall contain only one of the following:
-
-			"qcom,kpss-wdt-msm8960"
-			"qcom,kpss-wdt-apq8064"
-			"qcom,kpss-wdt-ipq8064"
-			"qcom,kpss-wdt-ipq4019"
-			"qcom,kpss-timer"
-			"qcom,scss-timer"
-			"qcom,kpss-wdt"
-
-- reg : shall contain base register location and length
-- clocks : shall contain the input clock
-
-Optional properties :
-- timeout-sec : shall contain the default watchdog timeout in seconds,
-                if unset, the default timeout is 30 seconds
-
-Example:
-	watchdog@208a038 {
-		compatible = "qcom,kpss-wdt-ipq8064";
-		reg = <0x0208a038 0x40>;
-		clocks = <&sleep_clk>;
-		timeout-sec = <10>;
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
new file mode 100644
index 000000000000..d8ac0be36e6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/qcom-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Krait Processor Sub-system (KPSS) Watchdog timer
+
+maintainers:
+  - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,apss-wdt-qcs404
+              - qcom,apss-wdt-sc7180
+              - qcom,apss-wdt-sc7280
+              - qcom,apss-wdt-sc8180x
+              - qcom,apss-wdt-sc8280xp
+              - qcom,apss-wdt-sdm845
+              - qcom,apss-wdt-sdx55
+              - qcom,apss-wdt-sdx65
+              - qcom,apss-wdt-sm6350
+              - qcom,apss-wdt-sm8150
+              - qcom,apss-wdt-sm8250
+          - const: qcom,kpss-wdt
+      - items:
+          - enum:
+              - qcom,kpss-wdt
+              - qcom,kpss-timer
+              - qcom,kpss-wdt-apq8064
+              - qcom,kpss-wdt-ipq4019
+              - qcom,kpss-wdt-ipq8064
+              - qcom,kpss-wdt-msm8960
+              - qcom,scss-timer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@208a038 {
+      compatible = "qcom,kpss-wdt-ipq8064";
+      reg = <0x0208a038 0x40>;
+      clocks = <&sleep_clk>;
+      timeout-sec = <10>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml b/Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml
new file mode 100644
index 000000000000..099245fe7b10
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/realtek,otto-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek Otto watchdog timer
+
+maintainers:
+  - Sander Vanheule <sander@svanheule.net>
+
+description: |
+  The timer has two timeout phases. Both phases have a maximum duration of 32
+  prescaled clock ticks, which is ca. 43s with a bus clock of 200MHz. The
+  minimum duration of each phase is one tick. Each phase can trigger an
+  interrupt, although the phase 2 interrupt will occur with the system reset.
+  - Phase 1: During this phase, the WDT can be pinged to reset the timeout.
+  - Phase 2: Starts after phase 1 has timed out, and only serves to give the
+    system some time to clean up, or notify others that it's going to reset.
+    During this phase, pinging the WDT has no effect, and a reset is
+    unavoidable, unless the WDT is disabled.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtl8380-wdt
+      - realtek,rtl8390-wdt
+      - realtek,rtl9300-wdt
+      - realtek,rtl9310-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: interrupt specifier for pretimeout
+      - description: interrupt specifier for timeout
+
+  interrupt-names:
+    items:
+      - const: phase1
+      - const: phase2
+
+  realtek,reset-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Specify how the system is reset after a timeout. Defaults to "cpu" if
+      left unspecified.
+    oneOf:
+      - description: Reset the entire chip
+        const: soc
+      - description: |
+          Reset the CPU and IPsec engine, but leave other peripherals untouched
+        const: cpu
+      - description: |
+          Reset the execution pointer, but don't actually reset any hardware
+        const: software
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+dependencies:
+  interrupts: [ interrupt-names ]
+
+examples:
+  - |
+    watchdog: watchdog@3150 {
+        compatible = "realtek,rtl8380-wdt";
+        reg = <0x3150 0xc>;
+
+        realtek,reset-mode = "soc";
+
+        clocks = <&lxbus_clock>;
+        timeout-sec = <20>;
+
+        interrupt-parent = <&rtlintc>;
+        interrupt-names = "phase1", "phase2";
+        interrupts = <19>, <18>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt
deleted file mode 100644
index 79b3c62f183d..000000000000
--- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Renesas Watchdog Timer (WDT) Controller
-
-Required properties:
- - compatible : Must be "renesas,<soctype>-wdt", followed by a generic
-		fallback compatible string when compatible with the generic
-		version.
-	       Examples with soctypes are:
-		 - "renesas,r8a7743-wdt" (RZ/G1M)
-		 - "renesas,r8a7744-wdt" (RZ/G1N)
-		 - "renesas,r8a7745-wdt" (RZ/G1E)
-		 - "renesas,r8a77470-wdt" (RZ/G1C)
-		 - "renesas,r8a774a1-wdt" (RZ/G2M)
-		 - "renesas,r8a774b1-wdt" (RZ/G2N)
-		 - "renesas,r8a774c0-wdt" (RZ/G2E)
-	         - "renesas,r8a7790-wdt" (R-Car H2)
-	         - "renesas,r8a7791-wdt" (R-Car M2-W)
-	         - "renesas,r8a7792-wdt" (R-Car V2H)
-	         - "renesas,r8a7793-wdt" (R-Car M2-N)
-	         - "renesas,r8a7794-wdt" (R-Car E2)
-	         - "renesas,r8a7795-wdt" (R-Car H3)
-	         - "renesas,r8a7796-wdt" (R-Car M3-W)
-	         - "renesas,r8a77961-wdt" (R-Car M3-W+)
-		 - "renesas,r8a77965-wdt" (R-Car M3-N)
-	         - "renesas,r8a77970-wdt" (R-Car V3M)
-	         - "renesas,r8a77990-wdt" (R-Car E3)
-	         - "renesas,r8a77995-wdt" (R-Car D3)
-	         - "renesas,r7s72100-wdt" (RZ/A1)
-	         - "renesas,r7s9210-wdt"  (RZ/A2)
-		The generic compatible string must be:
-		 - "renesas,rza-wdt" for RZ/A
-		 - "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G1
-		 - "renesas,rcar-gen3-wdt" for R-Car Gen3 and RZ/G2
-
-- reg : Should contain WDT registers location and length
-- clocks : the clock feeding the watchdog timer.
-
-Optional properties:
-- timeout-sec : Contains the watchdog timeout in seconds
-- power-domains : the power domain the WDT belongs to
-- interrupts: Some WDTs have an interrupt when used in interval timer mode
-
-Examples:
-
-	wdt0: watchdog@e6020000 {
-		compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
-		reg = <0 0xe6020000 0 0x0c>;
-		clocks = <&cpg CPG_MOD 402>;
-		power-domains = <&cpg>;
-		timeout-sec = <60>;
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
new file mode 100644
index 000000000000..26b1815a6753
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/renesas,wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r7s72100-wdt     # RZ/A1
+              - renesas,r7s9210-wdt      # RZ/A2
+          - const: renesas,rza-wdt       # RZ/A
+
+      - items:
+          - enum:
+              - renesas,r9a06g032-wdt    # RZ/N1D
+          - const: renesas,rzn1-wdt      # RZ/N1
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-wdt    # RZ/G2UL
+              - renesas,r9a07g044-wdt    # RZ/G2{L,LC}
+              - renesas,r9a07g054-wdt    # RZ/V2L
+          - const: renesas,rzg2l-wdt
+
+      - items:
+          - enum:
+              - renesas,r9a09g011-wdt    # RZ/V2M
+          - const: renesas,rzv2m-wdt     # RZ/V2M
+
+      - items:
+          - enum:
+              - renesas,r8a7742-wdt      # RZ/G1H
+              - renesas,r8a7743-wdt      # RZ/G1M
+              - renesas,r8a7744-wdt      # RZ/G1N
+              - renesas,r8a7745-wdt      # RZ/G1E
+              - renesas,r8a77470-wdt     # RZ/G1C
+              - renesas,r8a7790-wdt      # R-Car H2
+              - renesas,r8a7791-wdt      # R-Car M2-W
+              - renesas,r8a7792-wdt      # R-Car V2H
+              - renesas,r8a7793-wdt      # R-Car M2-N
+              - renesas,r8a7794-wdt      # R-Car E2
+          - const: renesas,rcar-gen2-wdt # R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,r8a774a1-wdt     # RZ/G2M
+              - renesas,r8a774b1-wdt     # RZ/G2N
+              - renesas,r8a774c0-wdt     # RZ/G2E
+              - renesas,r8a774e1-wdt     # RZ/G2H
+              - renesas,r8a7795-wdt      # R-Car H3
+              - renesas,r8a7796-wdt      # R-Car M3-W
+              - renesas,r8a77961-wdt     # R-Car M3-W+
+              - renesas,r8a77965-wdt     # R-Car M3-N
+              - renesas,r8a77970-wdt     # R-Car V3M
+              - renesas,r8a77980-wdt     # R-Car V3H
+              - renesas,r8a77990-wdt     # R-Car E3
+              - renesas,r8a77995-wdt     # R-Car D3
+          - const: renesas,rcar-gen3-wdt # R-Car Gen3 and RZ/G2
+
+      - items:
+          - enum:
+              - renesas,r8a779a0-wdt     # R-Car V3U
+              - renesas,r8a779f0-wdt     # R-Car S4-8
+              - renesas,r8a779g0-wdt     # R-Car V4H
+          - const: renesas,rcar-gen4-wdt # R-Car Gen4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Timeout
+      - description: Parity error
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: wdt
+      - const: perrout
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Register access clock
+      - description: Main clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: pclk
+      - const: oscclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  timeout-sec: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,rza-wdt
+                - renesas,rzn1-wdt
+    then:
+      required:
+        - power-domains
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzg2l-wdt
+              - renesas,rzv2m-wdt
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzg2l-wdt
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+        interrupt-names:
+          minItems: 2
+      required:
+        - interrupt-names
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    wdt0: watchdog@e6020000 {
+            compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
+            reg = <0xe6020000 0x0c>;
+            interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 402>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 402>;
+            timeout-sec = <60>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
index 2fa40d8864b2..8fb6656ba0c2 100644
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -22,25 +22,33 @@ properties:
       - samsung,exynos5250-wdt                # for Exynos5250
       - samsung,exynos5420-wdt                # for Exynos5420
       - samsung,exynos7-wdt                   # for Exynos7
+      - samsung,exynos850-wdt                 # for Exynos850
+      - samsung,exynosautov9-wdt              # for Exynosautov9
 
   reg:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   clock-names:
-    items:
-      - const: watchdog
+    minItems: 1
+    maxItems: 2
 
   interrupts:
     maxItems: 1
 
+  samsung,cluster-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Index of CPU cluster on which watchdog is running (in case of Exynos850)
+
   samsung,syscon-phandle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Phandle to the PMU system controller node (in case of Exynos5250
-      and Exynos5420).
+      Phandle to the PMU system controller node (in case of Exynos5250,
+      Exynos5420, Exynos7 and Exynos850).
 
 required:
   - compatible
@@ -58,9 +66,44 @@ allOf:
             enum:
               - samsung,exynos5250-wdt
               - samsung,exynos5420-wdt
+              - samsung,exynos7-wdt
+              - samsung,exynos850-wdt
+              - samsung,exynosautov9-wdt
     then:
       required:
         - samsung,syscon-phandle
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos850-wdt
+              - samsung,exynosautov9-wdt
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Bus clock, used for register interface
+            - description: Source clock (driving watchdog counter)
+        clock-names:
+          items:
+            - const: watchdog
+            - const: watchdog_src
+        samsung,cluster-index:
+          enum: [0, 1]
+      required:
+        - samsung,cluster-index
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Bus clock, which is also a source clock
+        clock-names:
+          items:
+            - const: watchdog
+        samsung,cluster-index: false
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt b/Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt
deleted file mode 100644
index 6f2d5f91964d..000000000000
--- a/Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* SBSA (Server Base System Architecture) Generic Watchdog
-
-The SBSA Generic Watchdog Timer is used to force a reset of the system
-after two stages of timeout have elapsed.  A detailed definition of the
-watchdog timer can be found in the ARM document: ARM-DEN-0029 - Server
-Base System Architecture (SBSA)
-
-Required properties:
-- compatible: Should at least contain "arm,sbsa-gwdt".
-
-- reg: Each entry specifies the base physical address of a register frame
-  and the length of that frame; currently, two frames must be defined,
-  in this order:
-  1: Watchdog control frame;
-  2: Refresh frame.
-
-- interrupts: Should contain the Watchdog Signal 0 (WS0) SPI (Shared
-  Peripheral Interrupt) number of SBSA Generic Watchdog.
-
-Optional properties
-- timeout-sec: Watchdog timeout values (in seconds).
-
-Example for FVP Foundation Model v8:
-
-watchdog@2a440000 {
-	compatible = "arm,sbsa-gwdt";
-	reg = <0x0 0x2a440000 0 0x1000>,
-	      <0x0 0x2a450000 0 0x1000>;
-	interrupts = <0 27 4>;
-	timeout-sec = <30>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/sigma,smp8642-wdt.txt b/Documentation/devicetree/bindings/watchdog/sigma,smp8642-wdt.txt
deleted file mode 100644
index 5b7ec2c707d8..000000000000
--- a/Documentation/devicetree/bindings/watchdog/sigma,smp8642-wdt.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Sigma Designs SMP86xx/SMP87xx watchdog
-
-Required properties:
-- compatible: Should be "sigma,smp8642-wdt"
-- reg: Specifies the physical address region
-- clocks: Should be a phandle to the clock
-
-Optional properties:
-- timeout-sec: watchdog timeout in seconds
-
-Example:
-
-watchdog@1fd00 {
-	compatible = "sigma,smp8642-wdt";
-	reg = <0x1fd00 8>;
-	clocks = <&xtal_in_clk>;
-	timeout-sec = <30>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt b/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt
deleted file mode 100644
index 0dce5e3100b4..000000000000
--- a/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-SiRFSoC Timer and Watchdog Timer(WDT) Controller
-
-Required properties:
-- compatible: "sirf,prima2-tick"
-- reg: Address range of tick timer/WDT register set
-- interrupts: interrupt number to the cpu
-
-Optional properties:
-- timeout-sec : Contains the watchdog timeout in seconds
-
-Example:
-
-timer@b0020000 {
-	compatible = "sirf,prima2-tick";
-	reg = <0xb0020000 0x1000>;
-	interrupts = <0>;
-	timeout-sec = <30>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
new file mode 100644
index 000000000000..92df6e453f64
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/snps,dw-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Watchdog Timer
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+maintainers:
+  - Jamie Iles <jamie@jamieiles.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: snps,dw-wdt
+      - items:
+          - enum:
+              - rockchip,px30-wdt
+              - rockchip,rk3066-wdt
+              - rockchip,rk3128-wdt
+              - rockchip,rk3188-wdt
+              - rockchip,rk3228-wdt
+              - rockchip,rk3288-wdt
+              - rockchip,rk3308-wdt
+              - rockchip,rk3328-wdt
+              - rockchip,rk3368-wdt
+              - rockchip,rk3399-wdt
+              - rockchip,rk3568-wdt
+              - rockchip,rv1108-wdt
+          - const: snps,dw-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: DW Watchdog pre-timeout interrupt
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Watchdog timer reference clock
+      - description: APB3 interface clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: tclk
+      - const: pclk
+
+  resets:
+    description: Phandle to the DW Watchdog reset lane
+    maxItems: 1
+
+  snps,watchdog-tops:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      DW APB Watchdog custom timer intervals - Timeout Period ranges (TOPs).
+      Each TOP is a number loaded into the watchdog counter at the moment of
+      the timer restart. The counter decrementing happens each tick of the
+      reference clock. Therefore the TOPs array is equivalent to an array of
+      the timer expiration intervals supported by the DW APB Watchdog. Note
+      DW APB Watchdog IP-core might be synthesized with fixed TOP values,
+      in which case this property is unnecessary with default TOPs utilized.
+    default: [0x0001000 0x0002000 0x0004000 0x0008000
+      0x0010000 0x0020000 0x0040000 0x0080000
+      0x0100000 0x0200000 0x0400000 0x0800000
+      0x1000000 0x2000000 0x4000000 0x8000000]
+    minItems: 16
+    maxItems: 16
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+examples:
+  - |
+    watchdog@ffd02000 {
+      compatible = "snps,dw-wdt";
+      reg = <0xffd02000 0x1000>;
+      interrupts = <0 171 4>;
+      clocks = <&per_base_clk>;
+      resets = <&wdt_rst>;
+    };
+
+  - |
+    watchdog@ffd02000 {
+      compatible = "snps,dw-wdt";
+      reg = <0xffd02000 0x1000>;
+      interrupts = <0 171 4>;
+      clocks = <&per_base_clk>;
+      clock-names = "tclk";
+      snps,watchdog-tops = <0x000000FF 0x000001FF 0x000003FF
+                            0x000007FF 0x0000FFFF 0x0001FFFF
+                            0x0003FFFF 0x0007FFFF 0x000FFFFF
+                            0x001FFFFF 0x003FFFFF 0x007FFFFF
+                            0x00FFFFFF 0x01FFFFFF 0x03FFFFFF
+                            0x07FFFFFF>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
new file mode 100644
index 000000000000..90698cfa8f94
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/socionext,uniphier-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier watchdog timer
+
+maintainers:
+  - Keiji Hayashibara <hayashibara.keiji@socionext.com>
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    const: socionext,uniphier-wdt
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // The UniPhier watchdog should be a subnode of a "syscon" compatible node.
+
+    sysctrl@61840000 {
+        compatible = "socionext,uniphier-ld11-sysctrl",
+                     "simple-mfd", "syscon";
+        reg = <0x61840000 0x10000>;
+
+        watchdog {
+            compatible = "socionext,uniphier-wdt";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml
index a27c504e2e4f..39736449ba64 100644
--- a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml
+++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 Independent WatchDoG (IWDG) bindings
 
 maintainers:
-  - Yannick Fertre <yannick.fertre@st.com>
-  - Christophe Roullier <christophe.roullier@st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
+  - Christophe Roullier <christophe.roullier@foss.st.com>
 
 allOf:
   - $ref: "watchdog.yaml#"
@@ -27,7 +27,6 @@ properties:
       - description: Low speed clock
       - description: Optional peripheral clock
     minItems: 1
-    maxItems: 2
 
   clock-names:
     items:
@@ -43,6 +42,8 @@ required:
   - clocks
   - clock-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/stm32mp1-clks.h>
diff --git a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt
deleted file mode 100644
index 7cc1407f15cb..000000000000
--- a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-STMicroelectronics STPMIC1 Watchdog
-
-Required properties:
-
-- compatible : should be "st,stpmic1-wdt"
-
-Example:
-
-watchdog {
-	compatible = "st,stpmic1-wdt";
-};
diff --git a/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt b/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt
deleted file mode 100644
index 8ffb88e39e76..000000000000
--- a/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-ST-Ericsson COH 901 327 Watchdog timer
-
-Required properties:
-- compatible: must be "stericsson,coh901327".
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: the interrupt used for the watchdog timeout warning.
-
-Optional properties:
-- timeout-sec: contains the watchdog timeout in seconds.
-
-Example:
-
-watchdog: watchdog@c0012000 {
-	compatible = "stericsson,coh901327";
-	reg = <0xc0012000 0x1000>;
-	interrupts = <3>;
-	timeout-sec = <60>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/sunplus,sp7021-wdt.yaml b/Documentation/devicetree/bindings/watchdog/sunplus,sp7021-wdt.yaml
new file mode 100644
index 000000000000..d90271013191
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/sunplus,sp7021-wdt.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/sunplus,sp7021-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SoCs Watchdog
+
+maintainers:
+  - XianTao Hu <xt.hu@cqplus1.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: sunplus,sp7021-wdt
+
+  reg:
+    items:
+      - description: watchdog registers regions
+      - description: miscellaneous control registers regions
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    watchdog: watchdog@9c000630 {
+        compatible = "sunplus,sp7021-wdt";
+        reg = <0x9c000630 0x08>, <0x9c000274 0x04>;
+        clocks = <&clkc 0x24>;
+        resets = <&rstc 0x14>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
new file mode 100644
index 000000000000..2f33635876ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/ti,rti-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 SoC Watchdog Timer
+
+maintainers:
+  - Tero Kristo <t-kristo@ti.com>
+
+description:
+  The TI K3 SoC watchdog timer is implemented via the RTI (Real Time
+  Interrupt) IP module. This timer adds a support for windowed watchdog
+  mode, which will signal an error if it is pinged outside the watchdog
+  time window, meaning either too early or too late. The error signal
+  generated can be routed to either interrupt a safety controller or
+  to directly reset the SoC.
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ti,j7-rti-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /*
+     * RTI WDT in main domain on J721e SoC. Assigned clocks are used to
+     * select the source clock for the watchdog, forcing it to tick with
+     * a 32kHz clock in this case.
+     */
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    watchdog@2200000 {
+        compatible = "ti,j7-rti-wdt";
+        reg = <0x2200000 0x100>;
+        clocks = <&k3_clks 252 1>;
+        power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+        assigned-clocks = <&k3_clks 252 1>;
+        assigned-clock-parents = <&k3_clks 252 5>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml
new file mode 100644
index 000000000000..eba083822d1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Toshiba Electronic Devices & Storage Corporation
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/watchdog/toshiba,visconti-wdt.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Toshiba Visconti SoCs PIUWDT Watchdog timer
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - toshiba,visconti-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  timeout-sec: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/toshiba,tmpv770x.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        wdt: watchdog@28330000 {
+            compatible = "toshiba,visconti-wdt";
+            reg = <0 0x28330000 0 0x1000>;
+            timeout-sec = <20>;
+            clocks = <&pismu TMPV770X_CLK_WDTCLK>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/uniphier-wdt.txt b/Documentation/devicetree/bindings/watchdog/uniphier-wdt.txt
deleted file mode 100644
index bf6337546dd1..000000000000
--- a/Documentation/devicetree/bindings/watchdog/uniphier-wdt.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-UniPhier watchdog timer controller
-
-This UniPhier watchdog timer controller must be under sysctrl node.
-
-Required properties:
-- compatible: should be "socionext,uniphier-wdt"
-
-Example:
-
-	sysctrl@61840000 {
-		compatible = "socionext,uniphier-ld11-sysctrl",
-			     "simple-mfd", "syscon";
-		reg = <0x61840000 0x4000>;
-
-		watchdog {
-			compatible = "socionext,uniphier-wdt";
-		}
-
-		other nodes ...
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml
index 187bf6cb62bf..e3dfb02f0ca5 100644
--- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml
+++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml
@@ -19,8 +19,9 @@ properties:
     pattern: "^watchdog(@.*|-[0-9a-f])?$"
 
   timeout-sec:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Contains the watchdog timeout in seconds.
 
+additionalProperties: true
+
 ...
diff --git a/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
new file mode 100644
index 000000000000..493a1c954707
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/xlnx,xps-timebase-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI/PLB softcore and window Watchdog Timer
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+  - Srinivas Neeli <srinivas.neeli@xilinx.com>
+
+description:
+  The Timebase watchdog timer(WDT) is a free-running 32 bit counter.
+  WDT uses a dual-expiration architecture. After one expiration of
+  the timeout interval, an interrupt is generated and the WDT state
+  bit is set to one in the status register. If the state bit is not
+  cleared (by writing a one to the state bit) before the next
+  expiration of the timeout interval, a WDT reset is generated.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,xps-timebase-wdt-1.01.a
+      - xlnx,xps-timebase-wdt-1.00.a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: Frequency of clock in Hz
+
+  xlnx,wdt-interval:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Watchdog timeout interval
+    minimum: 8
+    maximum: 32
+
+  xlnx,wdt-enable-once:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: If watchdog is configured as enable once,
+                 then the watchdog cannot be disabled after
+                 it has been enabled.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@40100000 {
+      compatible = "xlnx,xps-timebase-wdt-1.00.a";
+      reg = <0x40100000 0x1000>;
+      clock-frequency = <50000000>;
+      clocks = <&clkc 15>;
+      xlnx,wdt-enable-once = <0x0>;
+      xlnx,wdt-interval = <0x1b>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt b/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt
deleted file mode 100644
index 06ce67766756..000000000000
--- a/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-ZTE zx2967 Watchdog timer
-
-Required properties:
-
-- compatible : should be one of the following.
-       * zte,zx296718-wdt
-- reg : Specifies base physical address and size of the registers.
-- clocks : Pairs of phandle and specifier referencing the controller's clocks.
-- resets : Reference to the reset controller controlling the watchdog
-           controller.
-
-Optional properties:
-
-- timeout-sec : Contains the watchdog timeout in seconds.
-- zte,wdt-reset-sysctrl : Directs how to reset system by the watchdog.
-	if we don't want to restart system when watchdog been triggered,
-	it's not required, vice versa.
-	It should include following fields.
-	  * phandle of aon-sysctrl.
-	  * offset of register that be written, should be 0xb0.
-	  * configure value that be written to aon-sysctrl.
-	  * bit mask, corresponding bits will be affected.
-
-Example:
-
-wdt: watchdog@1465000 {
-	compatible = "zte,zx296718-wdt";
-	reg = <0x1465000 0x1000>;
-	clocks = <&topcrm WDT_WCLK>;
-	resets = <&toprst 35>;
-	zte,wdt-reset-sysctrl = <&aon_sysctrl 0xb0 1 0x115>;
-};
diff --git a/Documentation/devicetree/bindings/writing-bindings.rst b/Documentation/devicetree/bindings/writing-bindings.rst
new file mode 100644
index 000000000000..1ad081de2dd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/writing-bindings.rst
@@ -0,0 +1,93 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================================
+DOs and DON'Ts for designing and writing Devicetree bindings
+============================================================
+
+This is a list of common review feedback items focused on binding design. With
+every rule, there are exceptions and bindings have many gray areas.
+
+For guidelines related to patches, see
+Documentation/devicetree/bindings/submitting-patches.rst
+
+
+Overall design
+==============
+
+- DO attempt to make bindings complete even if a driver doesn't support some
+  features. For example, if a device has an interrupt, then include the
+  'interrupts' property even if the driver is only polled mode.
+
+- DON'T refer to Linux or "device driver" in bindings. Bindings should be
+  based on what the hardware has, not what an OS and driver currently support.
+
+- DO use node names matching the class of the device. Many standard names are
+  defined in the DT Spec. If there isn't one, consider adding it.
+
+- DO check that the example matches the documentation especially after making
+  review changes.
+
+- DON'T create nodes just for the sake of instantiating drivers. Multi-function
+  devices only need child nodes when the child nodes have their own DT
+  resources. A single node can be multiple providers (e.g. clocks and resets).
+
+- DON'T use 'syscon' alone without a specific compatible string. A 'syscon'
+  hardware block should have a compatible string unique enough to infer the
+  register layout of the entire block (at a minimum).
+
+
+Properties
+==========
+
+- DO make 'compatible' properties specific. DON'T use wildcards in compatible
+  strings. DO use fallback compatibles when devices are the same as or a subset
+  of prior implementations. DO add new compatibles in case there are new
+  features or bugs.
+
+- DO use a vendor prefix on device-specific property names. Consider if
+  properties could be common among devices of the same class. Check other
+  existing bindings for similar devices.
+
+- DON'T redefine common properties. Just reference the definition and define
+  constraints specific to the device.
+
+- DO use common property unit suffixes for properties with scientific units.
+  Recommended suffixes are listed at
+  https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/property-units.yaml
+
+- DO define properties in terms of constraints. How many entries? What are
+  possible values? What is the order?
+
+Typical cases and caveats
+=========================
+
+- Phandle entries, like clocks/dmas/interrupts/resets, should always be
+  explicitly ordered. Include the {clock,dma,interrupt,reset}-names if there is
+  more than one phandle. When used, both of these fields need the same
+  constraints (e.g.  list of items).
+
+- For names used in {clock,dma,interrupt,reset}-names, do not add any suffix,
+  e.g.: "tx" instead of "txirq" (for interrupt).
+
+- Properties without schema types (e.g. without standard suffix or not defined
+  by schema) need the type, even if this is an enum.
+
+- If schema includes other schema (e.g. /schemas/i2c/i2c-controller.yaml) use
+  "unevaluatedProperties:false". In other cases, usually use
+  "additionalProperties:false".
+
+- For sub-blocks/components of bigger device (e.g. SoC blocks) use rather
+  device-based compatible (e.g. SoC-based compatible), instead of custom
+  versioning of that component.
+  For example use "vendor,soc1234-i2c" instead of "vendor,i2c-v2".
+
+- "syscon" is not a generic property. Use vendor and type, e.g.
+  "vendor,power-manager-syscon".
+
+Board/SoC .dts Files
+====================
+
+- DO put all MMIO devices under a bus node and not at the top-level.
+
+- DO use non-empty 'ranges' to limit the size of child buses/devices. 64-bit
+  platforms don't need all devices to have 64-bit address and size.
diff --git a/Documentation/devicetree/bindings/writing-bindings.txt b/Documentation/devicetree/bindings/writing-bindings.txt
deleted file mode 100644
index 27dfd2d8016e..000000000000
--- a/Documentation/devicetree/bindings/writing-bindings.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-DOs and DON'Ts for designing and writing Devicetree bindings
-
-This is a list of common review feedback items focused on binding design. With
-every rule, there are exceptions and bindings have many gray areas.
-
-For guidelines related to patches, see
-Documentation/devicetree/bindings/submitting-patches.txt
-
-
-Overall design
-
-- DO attempt to make bindings complete even if a driver doesn't support some
-  features. For example, if a device has an interrupt, then include the
-  'interrupts' property even if the driver is only polled mode.
-
-- DON'T refer to Linux or "device driver" in bindings. Bindings should be
-  based on what the hardware has, not what an OS and driver currently support.
-
-- DO use node names matching the class of the device. Many standard names are
-  defined in the DT Spec. If there isn't one, consider adding it.
-
-- DO check that the example matches the documentation especially after making
-  review changes.
-
-- DON'T create nodes just for the sake of instantiating drivers. Multi-function
-  devices only need child nodes when the child nodes have their own DT
-  resources. A single node can be multiple providers (e.g. clocks and resets).
-
-- DON'T use 'syscon' alone without a specific compatible string. A 'syscon'
-  hardware block should have a compatible string unique enough to infer the
-  register layout of the entire block (at a minimum).
-
-
-Properties
-
-- DO make 'compatible' properties specific. DON'T use wildcards in compatible
-  strings. DO use fallback compatibles when devices are the same as or a subset
-  of prior implementations. DO add new compatibles in case there are new
-  features or bugs.
-
-- DO use a vendor prefix on device specific property names. Consider if
-  properties could be common among devices of the same class. Check other
-  existing bindings for similar devices.
-
-- DON'T redefine common properties. Just reference the definition and define
-  constraints specific to the device.
-
-- DO use common property unit suffixes for properties with scientific units.
-  See property-units.txt.
-
-- DO define properties in terms of constraints. How many entries? What are
-  possible values? What is the order?
-
-
-Board/SoC .dts Files
-
-- DO put all MMIO devices under a bus node and not at the top-level.
-
-- DO use non-empty 'ranges' to limit the size of child buses/devices. 64-bit
-  platforms don't need all devices to have 64-bit address and size.
diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst
new file mode 100644
index 000000000000..4a381d20f2b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/writing-schema.rst
@@ -0,0 +1,186 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Writing Devicetree Bindings in json-schema
+==========================================
+
+Devicetree bindings are written using json-schema vocabulary. Schema files are
+written in a JSON-compatible subset of YAML. YAML is used instead of JSON as it
+is considered more human readable and has some advantages such as allowing
+comments (Prefixed with '#').
+
+Also see :ref:`example-schema`.
+
+Schema Contents
+---------------
+
+Each schema doc is a structured json-schema which is defined by a set of
+top-level properties. Generally, there is one binding defined per file. The
+top-level json-schema properties used are:
+
+$id
+  A json-schema unique identifier string. The string must be a valid
+  URI typically containing the binding's filename and path. For DT schema, it must
+  begin with "http://devicetree.org/schemas/". The URL is used in constructing
+  references to other files specified in schema "$ref" properties. A $ref value
+  with a leading '/' will have the hostname prepended. A $ref value with only a
+  relative path or filename will be prepended with the hostname and path
+  components of the current schema file's '$id' value. A URL is used even for
+  local files, but there may not actually be files present at those locations.
+
+$schema
+  Indicates the meta-schema the schema file adheres to.
+
+title
+  A one-line description on the contents of the binding schema.
+
+maintainers
+  A DT specific property. Contains a list of email address(es)
+  for maintainers of this binding.
+
+description
+  Optional. A multi-line text block containing any detailed
+  information about this binding. It should contain things such as what the block
+  or device does, standards the device conforms to, and links to datasheets for
+  more information.
+
+select
+  Optional. A json-schema used to match nodes for applying the
+  schema. By default, without 'select', nodes are matched against their possible
+  compatible-string values or node name. Most bindings should not need select.
+
+allOf
+  Optional. A list of other schemas to include. This is used to
+  include other schemas the binding conforms to. This may be schemas for a
+  particular class of devices such as I2C or SPI controllers.
+
+properties
+  A set of sub-schema defining all the DT properties for the
+  binding. The exact schema syntax depends on whether properties are known,
+  common properties (e.g. 'interrupts') or are binding/vendor-specific
+  properties.
+
+A property can also define a child DT node with child properties defined
+under it.
+
+For more details on properties sections, see 'Property Schema' section.
+
+patternProperties
+  Optional. Similar to 'properties', but names are regex.
+
+required
+  A list of DT properties from the 'properties' section that
+  must always be present.
+
+examples
+  Optional. A list of one or more DTS hunks implementing the
+  binding. Note: YAML doesn't allow leading tabs, so spaces must be used instead.
+
+Unless noted otherwise, all properties are required.
+
+Property Schema
+---------------
+
+The 'properties' section of the schema contains all the DT properties for a
+binding. Each property contains a set of constraints using json-schema
+vocabulary for that property. The properties schemas are what are used for
+validation of DT files.
+
+For common properties, only additional constraints not covered by the common,
+binding schema need to be defined such as how many values are valid or what
+possible values are valid.
+
+Vendor-specific properties will typically need more detailed schema. With the
+exception of boolean properties, they should have a reference to a type in
+schemas/types.yaml. A "description" property is always required.
+
+The Devicetree schemas don't exactly match the YAML-encoded DT data produced by
+dtc. They are simplified to make them more compact and avoid a bunch of
+boilerplate. The tools process the schema files to produce the final schema for
+validation. There are currently 2 transformations the tools perform.
+
+The default for arrays in json-schema is they are variable-sized and allow more
+entries than explicitly defined. This can be restricted by defining 'minItems',
+'maxItems', and 'additionalItems'. However, for DeviceTree Schemas, a fixed
+size is desired in most cases, so these properties are added based on the
+number of entries in an 'items' list.
+
+The YAML Devicetree format also makes all string values an array and scalar
+values a matrix (in order to define groupings) even when only a single value
+is present. Single entries in schemas are fixed up to match this encoding.
+
+Coding style
+------------
+
+Use YAML coding style (two-space indentation). For DTS examples in the schema,
+preferred is four-space indentation.
+
+Testing
+-------
+
+Dependencies
+~~~~~~~~~~~~
+
+The DT schema project must be installed in order to validate the DT schema
+binding documents and validate DTS files using the DT schema. The DT schema
+project can be installed with pip::
+
+    pip3 install dtschema
+
+Note that 'dtschema' installation requires 'swig' and Python development files
+installed first. On Debian/Ubuntu systems::
+
+    apt install swig python3-dev
+
+Several executables (dt-doc-validate, dt-mk-schema, dt-validate) will be
+installed. Ensure they are in your PATH (~/.local/bin by default).
+
+Recommended is also to install yamllint (used by dtschema when present).
+
+Running checks
+~~~~~~~~~~~~~~
+
+The DT schema binding documents must be validated using the meta-schema (the
+schema for the schema) to ensure they are both valid json-schema and valid
+binding schema. All of the DT binding documents can be validated using the
+``dt_binding_check`` target::
+
+    make dt_binding_check
+
+In order to perform validation of DT source files, use the ``dtbs_check`` target::
+
+    make dtbs_check
+
+Note that ``dtbs_check`` will skip any binding schema files with errors. It is
+necessary to use ``dt_binding_check`` to get all the validation errors in the
+binding schema files.
+
+It is possible to run both in a single command::
+
+    make dt_binding_check dtbs_check
+
+It is also possible to run checks with a subset of matching schema files by
+setting the ``DT_SCHEMA_FILES`` variable to a specific schema file or pattern.
+
+::
+
+    make dt_binding_check DT_SCHEMA_FILES=trivial-devices.yaml
+    make dt_binding_check DT_SCHEMA_FILES=/gpio/
+    make dtbs_check DT_SCHEMA_FILES=trivial-devices.yaml
+
+
+json-schema Resources
+---------------------
+
+
+`JSON-Schema Specifications <http://json-schema.org/>`_
+
+`Using JSON Schema Book <http://usingjsonschema.com/>`_
+
+.. _example-schema:
+
+Annotated Example Schema
+------------------------
+
+Also available as a separate file: :download:`example-schema.yaml`
+
+.. literalinclude:: example-schema.yaml
diff --git a/Documentation/devicetree/bindings/xilinx.txt b/Documentation/devicetree/bindings/xilinx.txt
index d058ace29345..28199b31fe5e 100644
--- a/Documentation/devicetree/bindings/xilinx.txt
+++ b/Documentation/devicetree/bindings/xilinx.txt
@@ -86,149 +86,6 @@
 		xlnx,use-parity = <0>;
 	};
 
-   Some IP cores actually implement 2 or more logical devices.  In
-   this case, the device should still describe the whole IP core with
-   a single node and add a child node for each logical device.  The
-   ranges property can be used to translate from parent IP-core to the
-   registers of each device.  In addition, the parent node should be
-   compatible with the bus type 'xlnx,compound', and should contain
-   #address-cells and #size-cells, as with any other bus.  (Note: this
-   makes the assumption that both logical devices have the same bus
-   binding.  If this is not true, then separate nodes should be used
-   for each logical device).  The 'cell-index' property can be used to
-   enumerate logical devices within an IP core.  For example, the
-   following is the system.mhs entry for the dual ps2 controller found
-   on the ml403 reference design.
-
-	BEGIN opb_ps2_dual_ref
-		PARAMETER INSTANCE = opb_ps2_dual_ref_0
-		PARAMETER HW_VER = 1.00.a
-		PARAMETER C_BASEADDR = 0xA9000000
-		PARAMETER C_HIGHADDR = 0xA9001FFF
-		BUS_INTERFACE SOPB = opb_v20_0
-		PORT Sys_Intr1 = ps2_1_intr
-		PORT Sys_Intr2 = ps2_2_intr
-		PORT Clkin1 = ps2_clk_rx_1
-		PORT Clkin2 = ps2_clk_rx_2
-		PORT Clkpd1 = ps2_clk_tx_1
-		PORT Clkpd2 = ps2_clk_tx_2
-		PORT Rx1 = ps2_d_rx_1
-		PORT Rx2 = ps2_d_rx_2
-		PORT Txpd1 = ps2_d_tx_1
-		PORT Txpd2 = ps2_d_tx_2
-	END
-
-   It would result in the following device tree nodes:
-
-	opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,compound";
-		ranges = <0 a9000000 2000>;
-		// If this device had extra parameters, then they would
-		// go here.
-		ps2@0 {
-			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
-			reg = <0 40>;
-			interrupt-parent = <&opb_intc_0>;
-			interrupts = <3 0>;
-			cell-index = <0>;
-		};
-		ps2@1000 {
-			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
-			reg = <1000 40>;
-			interrupt-parent = <&opb_intc_0>;
-			interrupts = <3 0>;
-			cell-index = <0>;
-		};
-	};
-
-   Also, the system.mhs file defines bus attachments from the processor
-   to the devices.  The device tree structure should reflect the bus
-   attachments.  Again an example; this system.mhs fragment:
-
-	BEGIN ppc405_virtex4
-		PARAMETER INSTANCE = ppc405_0
-		PARAMETER HW_VER = 1.01.a
-		BUS_INTERFACE DPLB = plb_v34_0
-		BUS_INTERFACE IPLB = plb_v34_0
-	END
-
-	BEGIN opb_intc
-		PARAMETER INSTANCE = opb_intc_0
-		PARAMETER HW_VER = 1.00.c
-		PARAMETER C_BASEADDR = 0xD1000FC0
-		PARAMETER C_HIGHADDR = 0xD1000FDF
-		BUS_INTERFACE SOPB = opb_v20_0
-	END
-
-	BEGIN opb_uart16550
-		PARAMETER INSTANCE = opb_uart16550_0
-		PARAMETER HW_VER = 1.00.d
-		PARAMETER C_BASEADDR = 0xa0000000
-		PARAMETER C_HIGHADDR = 0xa0001FFF
-		BUS_INTERFACE SOPB = opb_v20_0
-	END
-
-	BEGIN plb_v34
-		PARAMETER INSTANCE = plb_v34_0
-		PARAMETER HW_VER = 1.02.a
-	END
-
-	BEGIN plb_bram_if_cntlr
-		PARAMETER INSTANCE = plb_bram_if_cntlr_0
-		PARAMETER HW_VER = 1.00.b
-		PARAMETER C_BASEADDR = 0xFFFF0000
-		PARAMETER C_HIGHADDR = 0xFFFFFFFF
-		BUS_INTERFACE SPLB = plb_v34_0
-	END
-
-	BEGIN plb2opb_bridge
-		PARAMETER INSTANCE = plb2opb_bridge_0
-		PARAMETER HW_VER = 1.01.a
-		PARAMETER C_RNG0_BASEADDR = 0x20000000
-		PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
-		PARAMETER C_RNG1_BASEADDR = 0x60000000
-		PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
-		PARAMETER C_RNG2_BASEADDR = 0x80000000
-		PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
-		PARAMETER C_RNG3_BASEADDR = 0xC0000000
-		PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
-		BUS_INTERFACE SPLB = plb_v34_0
-		BUS_INTERFACE MOPB = opb_v20_0
-	END
-
-   Gives this device tree (some properties removed for clarity):
-
-	plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v34-1.02.a";
-		device_type = "ibm,plb";
-		ranges; // 1:1 translation
-
-		plb_bram_if_cntrl_0: bram@ffff0000 {
-			reg = <ffff0000 10000>;
-		}
-
-		opb@20000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <20000000 20000000 20000000
-				  60000000 60000000 20000000
-				  80000000 80000000 40000000
-				  c0000000 c0000000 20000000>;
-
-			opb_uart16550_0: serial@a0000000 {
-				reg = <a00000000 2000>;
-			};
-
-			opb_intc_0: interrupt-controller@d1000fc0 {
-				reg = <d1000fc0 20>;
-			};
-		};
-	};
-
    That covers the general approach to binding xilinx IP cores into the
    device tree.  The following are bindings for specific devices:
 
diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
deleted file mode 100644
index 4660ccee35a3..000000000000
--- a/Documentation/devicetree/booting-without-of.txt
+++ /dev/null
@@ -1,1553 +0,0 @@
-           Booting the Linux/ppc kernel without Open Firmware
-           --------------------------------------------------
-
-(c) 2005 Benjamin Herrenschmidt <benh at kernel.crashing.org>,
-    IBM Corp.
-(c) 2005 Becky Bruce <becky.bruce at freescale.com>,
-    Freescale Semiconductor, FSL SOC and 32-bit additions
-(c) 2006 MontaVista Software, Inc.
-    Flash chip node definition
-
-Table of Contents
-=================
-
-  I - Introduction
-    1) Entry point for arch/arm
-    2) Entry point for arch/powerpc
-    3) Entry point for arch/x86
-    4) Entry point for arch/mips/bmips
-    5) Entry point for arch/sh
-
-  II - The DT block format
-    1) Header
-    2) Device tree generalities
-    3) Device tree "structure" block
-    4) Device tree "strings" block
-
-  III - Required content of the device tree
-    1) Note about cells and address representation
-    2) Note about "compatible" properties
-    3) Note about "name" properties
-    4) Note about node and property names and character set
-    5) Required nodes and properties
-      a) The root node
-      b) The /cpus node
-      c) The /cpus/* nodes
-      d) the /memory node(s)
-      e) The /chosen node
-      f) the /soc<SOCname> node
-
-  IV - "dtc", the device tree compiler
-
-  V - Recommendations for a bootloader
-
-  VI - System-on-a-chip devices and nodes
-    1) Defining child nodes of an SOC
-    2) Representing devices without a current OF specification
-
-  VII - Specifying interrupt information for devices
-    1) interrupts property
-    2) interrupt-parent property
-    3) OpenPIC Interrupt Controllers
-    4) ISA Interrupt Controllers
-
-  VIII - Specifying device power management information (sleep property)
-
-  IX - Specifying dma bus information
-
-  Appendix A - Sample SOC node for MPC8540
-
-
-Revision Information
-====================
-
-   May 18, 2005: Rev 0.1 - Initial draft, no chapter III yet.
-
-   May 19, 2005: Rev 0.2 - Add chapter III and bits & pieces here or
-                           clarifies the fact that a lot of things are
-                           optional, the kernel only requires a very
-                           small device tree, though it is encouraged
-                           to provide an as complete one as possible.
-
-   May 24, 2005: Rev 0.3 - Precise that DT block has to be in RAM
-			 - Misc fixes
-			 - Define version 3 and new format version 16
-			   for the DT block (version 16 needs kernel
-			   patches, will be fwd separately).
-			   String block now has a size, and full path
-			   is replaced by unit name for more
-			   compactness.
-			   linux,phandle is made optional, only nodes
-			   that are referenced by other nodes need it.
-			   "name" property is now automatically
-			   deduced from the unit name
-
-   June 1, 2005: Rev 0.4 - Correct confusion between OF_DT_END and
-                           OF_DT_END_NODE in structure definition.
-                         - Change version 16 format to always align
-                           property data to 4 bytes. Since tokens are
-                           already aligned, that means no specific
-                           required alignment between property size
-                           and property data. The old style variable
-                           alignment would make it impossible to do
-                           "simple" insertion of properties using
-                           memmove (thanks Milton for
-                           noticing). Updated kernel patch as well
-			 - Correct a few more alignment constraints
-			 - Add a chapter about the device-tree
-                           compiler and the textural representation of
-                           the tree that can be "compiled" by dtc.
-
-   November 21, 2005: Rev 0.5
-			 - Additions/generalizations for 32-bit
-			 - Changed to reflect the new arch/powerpc
-			   structure
-			 - Added chapter VI
-
-
- ToDo:
-	- Add some definitions of interrupt tree (simple/complex)
-	- Add some definitions for PCI host bridges
-	- Add some common address format examples
-	- Add definitions for standard properties and "compatible"
-	  names for cells that are not already defined by the existing
-	  OF spec.
-	- Compare FSL SOC use of PCI to standard and make sure no new
-	  node definition required.
-	- Add more information about node definitions for SOC devices
-  	  that currently have no standard, like the FSL CPM.
-
-
-I - Introduction
-================
-
-During the development of the Linux/ppc64 kernel, and more
-specifically, the addition of new platform types outside of the old
-IBM pSeries/iSeries pair, it was decided to enforce some strict rules
-regarding the kernel entry and bootloader <-> kernel interfaces, in
-order to avoid the degeneration that had become the ppc32 kernel entry
-point and the way a new platform should be added to the kernel. The
-legacy iSeries platform breaks those rules as it predates this scheme,
-but no new board support will be accepted in the main tree that
-doesn't follow them properly.  In addition, since the advent of the
-arch/powerpc merged architecture for ppc32 and ppc64, new 32-bit
-platforms and 32-bit platforms which move into arch/powerpc will be
-required to use these rules as well.
-
-The main requirement that will be defined in more detail below is
-the presence of a device-tree whose format is defined after Open
-Firmware specification. However, in order to make life easier
-to embedded board vendors, the kernel doesn't require the device-tree
-to represent every device in the system and only requires some nodes
-and properties to be present. This will be described in detail in
-section III, but, for example, the kernel does not require you to
-create a node for every PCI device in the system. It is a requirement
-to have a node for PCI host bridges in order to provide interrupt
-routing information and memory/IO ranges, among others. It is also
-recommended to define nodes for on chip devices and other buses that
-don't specifically fit in an existing OF specification. This creates a
-great flexibility in the way the kernel can then probe those and match
-drivers to device, without having to hard code all sorts of tables. It
-also makes it more flexible for board vendors to do minor hardware
-upgrades without significantly impacting the kernel code or cluttering
-it with special cases.
-
-
-1) Entry point for arch/arm
----------------------------
-
-   There is one single entry point to the kernel, at the start
-   of the kernel image. That entry point supports two calling
-   conventions.  A summary of the interface is described here.  A full
-   description of the boot requirements is documented in
-   Documentation/arm/booting.rst
-
-        a) ATAGS interface.  Minimal information is passed from firmware
-        to the kernel with a tagged list of predefined parameters.
-
-                r0 : 0
-
-                r1 : Machine type number
-
-                r2 : Physical address of tagged list in system RAM
-
-        b) Entry with a flattened device-tree block.  Firmware loads the
-        physical address of the flattened device tree block (dtb) into r2,
-        r1 is not used, but it is considered good practice to use a valid
-        machine number as described in Documentation/arm/booting.rst.
-
-                r0 : 0
-
-                r1 : Valid machine type number.  When using a device tree,
-                a single machine type number will often be assigned to
-                represent a class or family of SoCs.
-
-                r2 : physical pointer to the device-tree block
-                (defined in chapter II) in RAM.  Device tree can be located
-                anywhere in system RAM, but it should be aligned on a 64 bit
-                boundary.
-
-   The kernel will differentiate between ATAGS and device tree booting by
-   reading the memory pointed to by r2 and looking for either the flattened
-   device tree block magic value (0xd00dfeed) or the ATAG_CORE value at
-   offset 0x4 from r2 (0x54410001).
-
-2) Entry point for arch/powerpc
--------------------------------
-
-   There is one single entry point to the kernel, at the start
-   of the kernel image. That entry point supports two calling
-   conventions:
-
-        a) Boot from Open Firmware. If your firmware is compatible
-        with Open Firmware (IEEE 1275) or provides an OF compatible
-        client interface API (support for "interpret" callback of
-        forth words isn't required), you can enter the kernel with:
-
-              r5 : OF callback pointer as defined by IEEE 1275
-              bindings to powerpc. Only the 32-bit client interface
-              is currently supported
-
-              r3, r4 : address & length of an initrd if any or 0
-
-              The MMU is either on or off; the kernel will run the
-              trampoline located in arch/powerpc/kernel/prom_init.c to
-              extract the device-tree and other information from open
-              firmware and build a flattened device-tree as described
-              in b). prom_init() will then re-enter the kernel using
-              the second method. This trampoline code runs in the
-              context of the firmware, which is supposed to handle all
-              exceptions during that time.
-
-        b) Direct entry with a flattened device-tree block. This entry
-        point is called by a) after the OF trampoline and can also be
-        called directly by a bootloader that does not support the Open
-        Firmware client interface. It is also used by "kexec" to
-        implement "hot" booting of a new kernel from a previous
-        running one. This method is what I will describe in more
-        details in this document, as method a) is simply standard Open
-        Firmware, and thus should be implemented according to the
-        various standard documents defining it and its binding to the
-        PowerPC platform. The entry point definition then becomes:
-
-                r3 : physical pointer to the device-tree block
-                (defined in chapter II) in RAM
-
-                r4 : physical pointer to the kernel itself. This is
-                used by the assembly code to properly disable the MMU
-                in case you are entering the kernel with MMU enabled
-                and a non-1:1 mapping.
-
-                r5 : NULL (as to differentiate with method a)
-
-        Note about SMP entry: Either your firmware puts your other
-        CPUs in some sleep loop or spin loop in ROM where you can get
-        them out via a soft reset or some other means, in which case
-        you don't need to care, or you'll have to enter the kernel
-        with all CPUs. The way to do that with method b) will be
-        described in a later revision of this document.
-
-   Board supports (platforms) are not exclusive config options. An
-   arbitrary set of board supports can be built in a single kernel
-   image. The kernel will "know" what set of functions to use for a
-   given platform based on the content of the device-tree. Thus, you
-   should:
-
-        a) add your platform support as a _boolean_ option in
-        arch/powerpc/Kconfig, following the example of PPC_PSERIES,
-        PPC_PMAC and PPC_MAPLE. The later is probably a good
-        example of a board support to start from.
-
-        b) create your main platform file as
-        "arch/powerpc/platforms/myplatform/myboard_setup.c" and add it
-        to the Makefile under the condition of your CONFIG_
-        option. This file will define a structure of type "ppc_md"
-        containing the various callbacks that the generic code will
-        use to get to your platform specific code
-
-  A kernel image may support multiple platforms, but only if the
-  platforms feature the same core architecture.  A single kernel build
-  cannot support both configurations with Book E and configurations
-  with classic Powerpc architectures.
-
-3) Entry point for arch/x86
--------------------------------
-
-  There is one single 32bit entry point to the kernel at code32_start,
-  the decompressor (the real mode entry point goes to the same  32bit
-  entry point once it switched into protected mode). That entry point
-  supports one calling convention which is documented in
-  Documentation/x86/boot.rst
-  The physical pointer to the device-tree block (defined in chapter II)
-  is passed via setup_data which requires at least boot protocol 2.09.
-  The type filed is defined as
-
-  #define SETUP_DTB                      2
-
-  This device-tree is used as an extension to the "boot page". As such it
-  does not parse / consider data which is already covered by the boot
-  page. This includes memory size, reserved ranges, command line arguments
-  or initrd address. It simply holds information which can not be retrieved
-  otherwise like interrupt routing or a list of devices behind an I2C bus.
-
-4) Entry point for arch/mips/bmips
-----------------------------------
-
-  Some bootloaders only support a single entry point, at the start of the
-  kernel image.  Other bootloaders will jump to the ELF start address.
-  Both schemes are supported; CONFIG_BOOT_RAW=y and CONFIG_NO_EXCEPT_FILL=y,
-  so the first instruction immediately jumps to kernel_entry().
-
-  Similar to the arch/arm case (b), a DT-aware bootloader is expected to
-  set up the following registers:
-
-         a0 : 0
-
-         a1 : 0xffffffff
-
-         a2 : Physical pointer to the device tree block (defined in chapter
-         II) in RAM.  The device tree can be located anywhere in the first
-         512MB of the physical address space (0x00000000 - 0x1fffffff),
-         aligned on a 64 bit boundary.
-
-  Legacy bootloaders do not use this convention, and they do not pass in a
-  DT block.  In this case, Linux will look for a builtin DTB, selected via
-  CONFIG_DT_*.
-
-  This convention is defined for 32-bit systems only, as there are not
-  currently any 64-bit BMIPS implementations.
-
-5) Entry point for arch/sh
---------------------------
-
-  Device-tree-compatible SH bootloaders are expected to provide the physical
-  address of the device tree blob in r4. Since legacy bootloaders did not
-  guarantee any particular initial register state, kernels built to
-  inter-operate with old bootloaders must either use a builtin DTB or
-  select a legacy board option (something other than CONFIG_SH_DEVICE_TREE)
-  that does not use device tree. Support for the latter is being phased out
-  in favor of device tree.
-
-
-II - The DT block format
-========================
-
-
-This chapter defines the actual format of the flattened device-tree
-passed to the kernel. The actual content of it and kernel requirements
-are described later. You can find example of code manipulating that
-format in various places, including arch/powerpc/kernel/prom_init.c
-which will generate a flattened device-tree from the Open Firmware
-representation, or the fs2dt utility which is part of the kexec tools
-which will generate one from a filesystem representation. It is
-expected that a bootloader like uboot provides a bit more support,
-that will be discussed later as well.
-
-Note: The block has to be in main memory. It has to be accessible in
-both real mode and virtual mode with no mapping other than main
-memory. If you are writing a simple flash bootloader, it should copy
-the block to RAM before passing it to the kernel.
-
-
-1) Header
----------
-
-   The kernel is passed the physical address pointing to an area of memory
-   that is roughly described in include/linux/of_fdt.h by the structure
-   boot_param_header:
-
-struct boot_param_header {
-        u32     magic;                  /* magic word OF_DT_HEADER */
-        u32     totalsize;              /* total size of DT block */
-        u32     off_dt_struct;          /* offset to structure */
-        u32     off_dt_strings;         /* offset to strings */
-        u32     off_mem_rsvmap;         /* offset to memory reserve map
-                                           */
-        u32     version;                /* format version */
-        u32     last_comp_version;      /* last compatible version */
-
-        /* version 2 fields below */
-        u32     boot_cpuid_phys;        /* Which physical CPU id we're
-                                           booting on */
-        /* version 3 fields below */
-        u32     size_dt_strings;        /* size of the strings block */
-
-        /* version 17 fields below */
-        u32	size_dt_struct;		/* size of the DT structure block */
-};
-
-   Along with the constants:
-
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER            0xd00dfeed      /* 4: version,
-						   4: total size */
-#define OF_DT_BEGIN_NODE        0x1             /* Start node: full name
-						   */
-#define OF_DT_END_NODE          0x2             /* End node */
-#define OF_DT_PROP              0x3             /* Property: name off,
-                                                   size, content */
-#define OF_DT_END               0x9
-
-   All values in this header are in big endian format, the various
-   fields in this header are defined more precisely below. All
-   "offset" values are in bytes from the start of the header; that is
-   from the physical base address of the device tree block.
-
-   - magic
-
-     This is a magic value that "marks" the beginning of the
-     device-tree block header. It contains the value 0xd00dfeed and is
-     defined by the constant OF_DT_HEADER
-
-   - totalsize
-
-     This is the total size of the DT block including the header. The
-     "DT" block should enclose all data structures defined in this
-     chapter (who are pointed to by offsets in this header). That is,
-     the device-tree structure, strings, and the memory reserve map.
-
-   - off_dt_struct
-
-     This is an offset from the beginning of the header to the start
-     of the "structure" part the device tree. (see 2) device tree)
-
-   - off_dt_strings
-
-     This is an offset from the beginning of the header to the start
-     of the "strings" part of the device-tree
-
-   - off_mem_rsvmap
-
-     This is an offset from the beginning of the header to the start
-     of the reserved memory map. This map is a list of pairs of 64-
-     bit integers. Each pair is a physical address and a size. The
-     list is terminated by an entry of size 0. This map provides the
-     kernel with a list of physical memory areas that are "reserved"
-     and thus not to be used for memory allocations, especially during
-     early initialization. The kernel needs to allocate memory during
-     boot for things like un-flattening the device-tree, allocating an
-     MMU hash table, etc... Those allocations must be done in such a
-     way to avoid overriding critical things like, on Open Firmware
-     capable machines, the RTAS instance, or on some pSeries, the TCE
-     tables used for the iommu. Typically, the reserve map should
-     contain _at least_ this DT block itself (header,total_size). If
-     you are passing an initrd to the kernel, you should reserve it as
-     well. You do not need to reserve the kernel image itself. The map
-     should be 64-bit aligned.
-
-   - version
-
-     This is the version of this structure. Version 1 stops
-     here. Version 2 adds an additional field boot_cpuid_phys.
-     Version 3 adds the size of the strings block, allowing the kernel
-     to reallocate it easily at boot and free up the unused flattened
-     structure after expansion. Version 16 introduces a new more
-     "compact" format for the tree itself that is however not backward
-     compatible. Version 17 adds an additional field, size_dt_struct,
-     allowing it to be reallocated or moved more easily (this is
-     particularly useful for bootloaders which need to make
-     adjustments to a device tree based on probed information). You
-     should always generate a structure of the highest version defined
-     at the time of your implementation. Currently that is version 17,
-     unless you explicitly aim at being backward compatible.
-
-   - last_comp_version
-
-     Last compatible version. This indicates down to what version of
-     the DT block you are backward compatible. For example, version 2
-     is backward compatible with version 1 (that is, a kernel build
-     for version 1 will be able to boot with a version 2 format). You
-     should put a 1 in this field if you generate a device tree of
-     version 1 to 3, or 16 if you generate a tree of version 16 or 17
-     using the new unit name format.
-
-   - boot_cpuid_phys
-
-     This field only exist on version 2 headers. It indicate which
-     physical CPU ID is calling the kernel entry point. This is used,
-     among others, by kexec. If you are on an SMP system, this value
-     should match the content of the "reg" property of the CPU node in
-     the device-tree corresponding to the CPU calling the kernel entry
-     point (see further chapters for more information on the required
-     device-tree contents)
-
-   - size_dt_strings
-
-     This field only exists on version 3 and later headers.  It
-     gives the size of the "strings" section of the device tree (which
-     starts at the offset given by off_dt_strings).
-
-   - size_dt_struct
-
-     This field only exists on version 17 and later headers.  It gives
-     the size of the "structure" section of the device tree (which
-     starts at the offset given by off_dt_struct).
-
-   So the typical layout of a DT block (though the various parts don't
-   need to be in that order) looks like this (addresses go from top to
-   bottom):
-
-
-             ------------------------------
-     base -> |  struct boot_param_header  |
-             ------------------------------
-             |      (alignment gap) (*)   |
-             ------------------------------
-             |      memory reserve map    |
-             ------------------------------
-             |      (alignment gap)       |
-             ------------------------------
-             |                            |
-             |    device-tree structure   |
-             |                            |
-             ------------------------------
-             |      (alignment gap)       |
-             ------------------------------
-             |                            |
-             |     device-tree strings    |
-             |                            |
-      -----> ------------------------------
-      |
-      |
-      --- (base + totalsize)
-
-  (*) The alignment gaps are not necessarily present; their presence
-      and size are dependent on the various alignment requirements of
-      the individual data blocks.
-
-
-2) Device tree generalities
----------------------------
-
-This device-tree itself is separated in two different blocks, a
-structure block and a strings block. Both need to be aligned to a 4
-byte boundary.
-
-First, let's quickly describe the device-tree concept before detailing
-the storage format. This chapter does _not_ describe the detail of the
-required types of nodes & properties for the kernel, this is done
-later in chapter III.
-
-The device-tree layout is strongly inherited from the definition of
-the Open Firmware IEEE 1275 device-tree. It's basically a tree of
-nodes, each node having two or more named properties. A property can
-have a value or not.
-
-It is a tree, so each node has one and only one parent except for the
-root node who has no parent.
-
-A node has 2 names. The actual node name is generally contained in a
-property of type "name" in the node property list whose value is a
-zero terminated string and is mandatory for version 1 to 3 of the
-format definition (as it is in Open Firmware). Version 16 makes it
-optional as it can generate it from the unit name defined below.
-
-There is also a "unit name" that is used to differentiate nodes with
-the same name at the same level, it is usually made of the node
-names, the "@" sign, and a "unit address", which definition is
-specific to the bus type the node sits on.
-
-The unit name doesn't exist as a property per-se but is included in
-the device-tree structure. It is typically used to represent "path" in
-the device-tree. More details about the actual format of these will be
-below.
-
-The kernel generic code does not make any formal use of the
-unit address (though some board support code may do) so the only real
-requirement here for the unit address is to ensure uniqueness of
-the node unit name at a given level of the tree. Nodes with no notion
-of address and no possible sibling of the same name (like /memory or
-/cpus) may omit the unit address in the context of this specification,
-or use the "@0" default unit address. The unit name is used to define
-a node "full path", which is the concatenation of all parent node
-unit names separated with "/".
-
-The root node doesn't have a defined name, and isn't required to have
-a name property either if you are using version 3 or earlier of the
-format. It also has no unit address (no @ symbol followed by a unit
-address). The root node unit name is thus an empty string. The full
-path to the root node is "/".
-
-Every node which actually represents an actual device (that is, a node
-which isn't only a virtual "container" for more nodes, like "/cpus"
-is) is also required to have a "compatible" property indicating the
-specific hardware and an optional list of devices it is fully
-backwards compatible with.
-
-Finally, every node that can be referenced from a property in another
-node is required to have either a "phandle" or a "linux,phandle"
-property. Real Open Firmware implementations provide a unique
-"phandle" value for every node that the "prom_init()" trampoline code
-turns into "linux,phandle" properties. However, this is made optional
-if the flattened device tree is used directly. An example of a node
-referencing another node via "phandle" is when laying out the
-interrupt tree which will be described in a further version of this
-document.
-
-The "phandle" property is a 32-bit value that uniquely
-identifies a node. You are free to use whatever values or system of
-values, internal pointers, or whatever to generate these, the only
-requirement is that every node for which you provide that property has
-a unique value for it.
-
-Here is an example of a simple device-tree. In this example, an "o"
-designates a node followed by the node unit name. Properties are
-presented with their name followed by their content. "content"
-represents an ASCII string (zero terminated) value, while <content>
-represents a 32-bit value, specified in decimal or hexadecimal (the
-latter prefixed 0x). The various nodes in this example will be
-discussed in a later chapter. At this point, it is only meant to give
-you a idea of what a device-tree looks like. I have purposefully kept
-the "name" and "linux,phandle" properties which aren't necessary in
-order to give you a better idea of what the tree looks like in
-practice.
-
-  / o device-tree
-      |- name = "device-tree"
-      |- model = "MyBoardName"
-      |- compatible = "MyBoardFamilyName"
-      |- #address-cells = <2>
-      |- #size-cells = <2>
-      |- linux,phandle = <0>
-      |
-      o cpus
-      | | - name = "cpus"
-      | | - linux,phandle = <1>
-      | | - #address-cells = <1>
-      | | - #size-cells = <0>
-      | |
-      | o PowerPC,970@0
-      |   |- name = "PowerPC,970"
-      |   |- device_type = "cpu"
-      |   |- reg = <0>
-      |   |- clock-frequency = <0x5f5e1000>
-      |   |- 64-bit
-      |   |- linux,phandle = <2>
-      |
-      o memory@0
-      | |- name = "memory"
-      | |- device_type = "memory"
-      | |- reg = <0x00000000 0x00000000 0x00000000 0x20000000>
-      | |- linux,phandle = <3>
-      |
-      o chosen
-        |- name = "chosen"
-        |- bootargs = "root=/dev/sda2"
-        |- linux,phandle = <4>
-
-This tree is almost a minimal tree. It pretty much contains the
-minimal set of required nodes and properties to boot a linux kernel;
-that is, some basic model information at the root, the CPUs, and the
-physical memory layout.  It also includes misc information passed
-through /chosen, like in this example, the platform type (mandatory)
-and the kernel command line arguments (optional).
-
-The /cpus/PowerPC,970@0/64-bit property is an example of a
-property without a value. All other properties have a value. The
-significance of the #address-cells and #size-cells properties will be
-explained in chapter IV which defines precisely the required nodes and
-properties and their content.
-
-
-3) Device tree "structure" block
-
-The structure of the device tree is a linearized tree structure. The
-"OF_DT_BEGIN_NODE" token starts a new node, and the "OF_DT_END_NODE"
-ends that node definition. Child nodes are simply defined before
-"OF_DT_END_NODE" (that is nodes within the node). A 'token' is a 32
-bit value. The tree has to be "finished" with a OF_DT_END token
-
-Here's the basic structure of a single node:
-
-     * token OF_DT_BEGIN_NODE (that is 0x00000001)
-     * for version 1 to 3, this is the node full path as a zero
-       terminated string, starting with "/". For version 16 and later,
-       this is the node unit name only (or an empty string for the
-       root node)
-     * [align gap to next 4 bytes boundary]
-     * for each property:
-        * token OF_DT_PROP (that is 0x00000003)
-        * 32-bit value of property value size in bytes (or 0 if no
-          value)
-        * 32-bit value of offset in string block of property name
-        * property value data if any
-        * [align gap to next 4 bytes boundary]
-     * [child nodes if any]
-     * token OF_DT_END_NODE (that is 0x00000002)
-
-So the node content can be summarized as a start token, a full path,
-a list of properties, a list of child nodes, and an end token. Every
-child node is a full node structure itself as defined above.
-
-NOTE: The above definition requires that all property definitions for
-a particular node MUST precede any subnode definitions for that node.
-Although the structure would not be ambiguous if properties and
-subnodes were intermingled, the kernel parser requires that the
-properties come first (up until at least 2.6.22).  Any tools
-manipulating a flattened tree must take care to preserve this
-constraint.
-
-4) Device tree "strings" block
-
-In order to save space, property names, which are generally redundant,
-are stored separately in the "strings" block. This block is simply the
-whole bunch of zero terminated strings for all property names
-concatenated together. The device-tree property definitions in the
-structure block will contain offset values from the beginning of the
-strings block.
-
-
-III - Required content of the device tree
-=========================================
-
-WARNING: All "linux,*" properties defined in this document apply only
-to a flattened device-tree. If your platform uses a real
-implementation of Open Firmware or an implementation compatible with
-the Open Firmware client interface, those properties will be created
-by the trampoline code in the kernel's prom_init() file. For example,
-that's where you'll have to add code to detect your board model and
-set the platform number. However, when using the flattened device-tree
-entry point, there is no prom_init() pass, and thus you have to
-provide those properties yourself.
-
-
-1) Note about cells and address representation
-----------------------------------------------
-
-The general rule is documented in the various Open Firmware
-documentations. If you choose to describe a bus with the device-tree
-and there exist an OF bus binding, then you should follow the
-specification. However, the kernel does not require every single
-device or bus to be described by the device tree.
-
-In general, the format of an address for a device is defined by the
-parent bus type, based on the #address-cells and #size-cells
-properties.  Note that the parent's parent definitions of #address-cells
-and #size-cells are not inherited so every node with children must specify
-them.  The kernel requires the root node to have those properties defining
-addresses format for devices directly mapped on the processor bus.
-
-Those 2 properties define 'cells' for representing an address and a
-size. A "cell" is a 32-bit number. For example, if both contain 2
-like the example tree given above, then an address and a size are both
-composed of 2 cells, and each is a 64-bit number (cells are
-concatenated and expected to be in big endian format). Another example
-is the way Apple firmware defines them, with 2 cells for an address
-and one cell for a size.  Most 32-bit implementations should define
-#address-cells and #size-cells to 1, which represents a 32-bit value.
-Some 32-bit processors allow for physical addresses greater than 32
-bits; these processors should define #address-cells as 2.
-
-"reg" properties are always a tuple of the type "address size" where
-the number of cells of address and size is specified by the bus
-#address-cells and #size-cells. When a bus supports various address
-spaces and other flags relative to a given address allocation (like
-prefetchable, etc...) those flags are usually added to the top level
-bits of the physical address. For example, a PCI physical address is
-made of 3 cells, the bottom two containing the actual address itself
-while the top cell contains address space indication, flags, and pci
-bus & device numbers.
-
-For buses that support dynamic allocation, it's the accepted practice
-to then not provide the address in "reg" (keep it 0) though while
-providing a flag indicating the address is dynamically allocated, and
-then, to provide a separate "assigned-addresses" property that
-contains the fully allocated addresses. See the PCI OF bindings for
-details.
-
-In general, a simple bus with no address space bits and no dynamic
-allocation is preferred if it reflects your hardware, as the existing
-kernel address parsing functions will work out of the box. If you
-define a bus type with a more complex address format, including things
-like address space bits, you'll have to add a bus translator to the
-prom_parse.c file of the recent kernels for your bus type.
-
-The "reg" property only defines addresses and sizes (if #size-cells is
-non-0) within a given bus. In order to translate addresses upward
-(that is into parent bus addresses, and possibly into CPU physical
-addresses), all buses must contain a "ranges" property. If the
-"ranges" property is missing at a given level, it's assumed that
-translation isn't possible, i.e., the registers are not visible on the
-parent bus.  The format of the "ranges" property for a bus is a list
-of:
-
-	bus address, parent bus address, size
-
-"bus address" is in the format of the bus this bus node is defining,
-that is, for a PCI bridge, it would be a PCI address. Thus, (bus
-address, size) defines a range of addresses for child devices. "parent
-bus address" is in the format of the parent bus of this bus. For
-example, for a PCI host controller, that would be a CPU address. For a
-PCI<->ISA bridge, that would be a PCI address. It defines the base
-address in the parent bus where the beginning of that range is mapped.
-
-For new 64-bit board support, I recommend either the 2/2 format or
-Apple's 2/1 format which is slightly more compact since sizes usually
-fit in a single 32-bit word.   New 32-bit board support should use a
-1/1 format, unless the processor supports physical addresses greater
-than 32-bits, in which case a 2/1 format is recommended.
-
-Alternatively, the "ranges" property may be empty, indicating that the
-registers are visible on the parent bus using an identity mapping
-translation.  In other words, the parent bus address space is the same
-as the child bus address space.
-
-2) Note about "compatible" properties
--------------------------------------
-
-These properties are optional, but recommended in devices and the root
-node. The format of a "compatible" property is a list of concatenated
-zero terminated strings. They allow a device to express its
-compatibility with a family of similar devices, in some cases,
-allowing a single driver to match against several devices regardless
-of their actual names.
-
-3) Note about "name" properties
--------------------------------
-
-While earlier users of Open Firmware like OldWorld macintoshes tended
-to use the actual device name for the "name" property, it's nowadays
-considered a good practice to use a name that is closer to the device
-class (often equal to device_type). For example, nowadays, Ethernet
-controllers are named "ethernet", an additional "model" property
-defining precisely the chip type/model, and "compatible" property
-defining the family in case a single driver can driver more than one
-of these chips. However, the kernel doesn't generally put any
-restriction on the "name" property; it is simply considered good
-practice to follow the standard and its evolutions as closely as
-possible.
-
-Note also that the new format version 16 makes the "name" property
-optional. If it's absent for a node, then the node's unit name is then
-used to reconstruct the name. That is, the part of the unit name
-before the "@" sign is used (or the entire unit name if no "@" sign
-is present).
-
-4) Note about node and property names and character set
--------------------------------------------------------
-
-While Open Firmware provides more flexible usage of 8859-1, this
-specification enforces more strict rules. Nodes and properties should
-be comprised only of ASCII characters 'a' to 'z', '0' to
-'9', ',', '.', '_', '+', '#', '?', and '-'. Node names additionally
-allow uppercase characters 'A' to 'Z' (property names should be
-lowercase. The fact that vendors like Apple don't respect this rule is
-irrelevant here). Additionally, node and property names should always
-begin with a character in the range 'a' to 'z' (or 'A' to 'Z' for node
-names).
-
-The maximum number of characters for both nodes and property names
-is 31. In the case of node names, this is only the leftmost part of
-a unit name (the pure "name" property), it doesn't include the unit
-address which can extend beyond that limit.
-
-
-5) Required nodes and properties
---------------------------------
-  These are all that are currently required. However, it is strongly
-  recommended that you expose PCI host bridges as documented in the
-  PCI binding to Open Firmware, and your interrupt tree as documented
-  in OF interrupt tree specification.
-
-  a) The root node
-
-  The root node requires some properties to be present:
-
-    - model : this is your board name/model
-    - #address-cells : address representation for "root" devices
-    - #size-cells: the size representation for "root" devices
-    - compatible : the board "family" generally finds its way here,
-      for example, if you have 2 board models with a similar layout,
-      that typically get driven by the same platform code in the
-      kernel, you would specify the exact board model in the
-      compatible property followed by an entry that represents the SoC
-      model.
-
-  The root node is also generally where you add additional properties
-  specific to your board like the serial number if any, that sort of
-  thing. It is recommended that if you add any "custom" property whose
-  name may clash with standard defined ones, you prefix them with your
-  vendor name and a comma.
-
-  Additional properties for the root node:
-
-    - serial-number : a string representing the device's serial number
-
-  b) The /cpus node
-
-  This node is the parent of all individual CPU nodes. It doesn't
-  have any specific requirements, though it's generally good practice
-  to have at least:
-
-               #address-cells = <00000001>
-               #size-cells    = <00000000>
-
-  This defines that the "address" for a CPU is a single cell, and has
-  no meaningful size. This is not necessary but the kernel will assume
-  that format when reading the "reg" properties of a CPU node, see
-  below
-
-  c) The /cpus/* nodes
-
-  So under /cpus, you are supposed to create a node for every CPU on
-  the machine. There is no specific restriction on the name of the
-  CPU, though it's common to call it <architecture>,<core>. For
-  example, Apple uses PowerPC,G5 while IBM uses PowerPC,970FX.
-  However, the Generic Names convention suggests that it would be
-  better to simply use 'cpu' for each cpu node and use the compatible
-  property to identify the specific cpu core.
-
-  Required properties:
-
-    - device_type : has to be "cpu"
-    - reg : This is the physical CPU number, it's a single 32-bit cell
-      and is also used as-is as the unit number for constructing the
-      unit name in the full path. For example, with 2 CPUs, you would
-      have the full path:
-        /cpus/PowerPC,970FX@0
-        /cpus/PowerPC,970FX@1
-      (unit addresses do not require leading zeroes)
-    - d-cache-block-size : one cell, L1 data cache block size in bytes (*)
-    - i-cache-block-size : one cell, L1 instruction cache block size in
-      bytes
-    - d-cache-size : one cell, size of L1 data cache in bytes
-    - i-cache-size : one cell, size of L1 instruction cache in bytes
-
-(*) The cache "block" size is the size on which the cache management
-instructions operate. Historically, this document used the cache
-"line" size here which is incorrect. The kernel will prefer the cache
-block size and will fallback to cache line size for backward
-compatibility.
-
-  Recommended properties:
-
-    - timebase-frequency : a cell indicating the frequency of the
-      timebase in Hz. This is not directly used by the generic code,
-      but you are welcome to copy/paste the pSeries code for setting
-      the kernel timebase/decrementer calibration based on this
-      value.
-    - clock-frequency : a cell indicating the CPU core clock frequency
-      in Hz. A new property will be defined for 64-bit values, but if
-      your frequency is < 4Ghz, one cell is enough. Here as well as
-      for the above, the common code doesn't use that property, but
-      you are welcome to re-use the pSeries or Maple one. A future
-      kernel version might provide a common function for this.
-    - d-cache-line-size : one cell, L1 data cache line size in bytes
-      if different from the block size
-    - i-cache-line-size : one cell, L1 instruction cache line size in
-      bytes if different from the block size
-
-  You are welcome to add any property you find relevant to your board,
-  like some information about the mechanism used to soft-reset the
-  CPUs. For example, Apple puts the GPIO number for CPU soft reset
-  lines in there as a "soft-reset" property since they start secondary
-  CPUs by soft-resetting them.
-
-
-  d) the /memory node(s)
-
-  To define the physical memory layout of your board, you should
-  create one or more memory node(s). You can either create a single
-  node with all memory ranges in its reg property, or you can create
-  several nodes, as you wish. The unit address (@ part) used for the
-  full path is the address of the first range of memory defined by a
-  given node. If you use a single memory node, this will typically be
-  @0.
-
-  Required properties:
-
-    - device_type : has to be "memory"
-    - reg : This property contains all the physical memory ranges of
-      your board. It's a list of addresses/sizes concatenated
-      together, with the number of cells of each defined by the
-      #address-cells and #size-cells of the root node. For example,
-      with both of these properties being 2 like in the example given
-      earlier, a 970 based machine with 6Gb of RAM could typically
-      have a "reg" property here that looks like:
-
-      00000000 00000000 00000000 80000000
-      00000001 00000000 00000001 00000000
-
-      That is a range starting at 0 of 0x80000000 bytes and a range
-      starting at 0x100000000 and of 0x100000000 bytes. You can see
-      that there is no memory covering the IO hole between 2Gb and
-      4Gb. Some vendors prefer splitting those ranges into smaller
-      segments, but the kernel doesn't care.
-
-  Additional properties:
-
-    - hotpluggable : The presence of this property provides an explicit
-      hint to the operating system that this memory may potentially be
-      removed later. The kernel can take this into consideration when
-      doing nonmovable allocations and when laying out memory zones.
-
-  e) The /chosen node
-
-  This node is a bit "special". Normally, that's where Open Firmware
-  puts some variable environment information, like the arguments, or
-  the default input/output devices.
-
-  This specification makes a few of these mandatory, but also defines
-  some linux-specific properties that would be normally constructed by
-  the prom_init() trampoline when booting with an OF client interface,
-  but that you have to provide yourself when using the flattened format.
-
-  Recommended properties:
-
-    - bootargs : This zero-terminated string is passed as the kernel
-      command line
-    - linux,stdout-path : This is the full path to your standard
-      console device if any. Typically, if you have serial devices on
-      your board, you may want to put the full path to the one set as
-      the default console in the firmware here, for the kernel to pick
-      it up as its own default console.
-
-  Note that u-boot creates and fills in the chosen node for platforms
-  that use it.
-
-  (Note: a practice that is now obsolete was to include a property
-  under /chosen called interrupt-controller which had a phandle value
-  that pointed to the main interrupt controller)
-
-  f) the /soc<SOCname> node
-
-  This node is used to represent a system-on-a-chip (SoC) and must be
-  present if the processor is a SoC. The top-level soc node contains
-  information that is global to all devices on the SoC. The node name
-  should contain a unit address for the SoC, which is the base address
-  of the memory-mapped register set for the SoC. The name of an SoC
-  node should start with "soc", and the remainder of the name should
-  represent the part number for the soc.  For example, the MPC8540's
-  soc node would be called "soc8540".
-
-  Required properties:
-
-    - ranges : Should be defined as specified in 1) to describe the
-      translation of SoC addresses for memory mapped SoC registers.
-    - bus-frequency: Contains the bus frequency for the SoC node.
-      Typically, the value of this field is filled in by the boot
-      loader.
-    - compatible : Exact model of the SoC
-
-
-  Recommended properties:
-
-    - reg : This property defines the address and size of the
-      memory-mapped registers that are used for the SOC node itself.
-      It does not include the child device registers - these will be
-      defined inside each child node.  The address specified in the
-      "reg" property should match the unit address of the SOC node.
-    - #address-cells : Address representation for "soc" devices.  The
-      format of this field may vary depending on whether or not the
-      device registers are memory mapped.  For memory mapped
-      registers, this field represents the number of cells needed to
-      represent the address of the registers.  For SOCs that do not
-      use MMIO, a special address format should be defined that
-      contains enough cells to represent the required information.
-      See 1) above for more details on defining #address-cells.
-    - #size-cells : Size representation for "soc" devices
-    - #interrupt-cells : Defines the width of cells used to represent
-       interrupts.  Typically this value is <2>, which includes a
-       32-bit number that represents the interrupt number, and a
-       32-bit number that represents the interrupt sense and level.
-       This field is only needed if the SOC contains an interrupt
-       controller.
-
-  The SOC node may contain child nodes for each SOC device that the
-  platform uses.  Nodes should not be created for devices which exist
-  on the SOC but are not used by a particular platform. See chapter VI
-  for more information on how to specify devices that are part of a SOC.
-
-  Example SOC node for the MPC8540:
-
-	soc8540@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		device_type = "soc";
-		ranges = <0x00000000 0xe0000000 0x00100000>
-		reg = <0xe0000000 0x00003000>;
-		bus-frequency = <0>;
-	}
-
-
-
-IV - "dtc", the device tree compiler
-====================================
-
-
-dtc source code can be found at
-<http://git.jdl.com/gitweb/?p=dtc.git>
-
-WARNING: This version is still in early development stage; the
-resulting device-tree "blobs" have not yet been validated with the
-kernel. The current generated block lacks a useful reserve map (it will
-be fixed to generate an empty one, it's up to the bootloader to fill
-it up) among others. The error handling needs work, bugs are lurking,
-etc...
-
-dtc basically takes a device-tree in a given format and outputs a
-device-tree in another format. The currently supported formats are:
-
-  Input formats:
-  -------------
-
-     - "dtb": "blob" format, that is a flattened device-tree block
-       with
-        header all in a binary blob.
-     - "dts": "source" format. This is a text file containing a
-       "source" for a device-tree. The format is defined later in this
-        chapter.
-     - "fs" format. This is a representation equivalent to the
-        output of /proc/device-tree, that is nodes are directories and
-	properties are files
-
- Output formats:
- ---------------
-
-     - "dtb": "blob" format
-     - "dts": "source" format
-     - "asm": assembly language file. This is a file that can be
-       sourced by gas to generate a device-tree "blob". That file can
-       then simply be added to your Makefile. Additionally, the
-       assembly file exports some symbols that can be used.
-
-
-The syntax of the dtc tool is
-
-    dtc [-I <input-format>] [-O <output-format>]
-        [-o output-filename] [-V output_version] input_filename
-
-
-The "output_version" defines what version of the "blob" format will be
-generated. Supported versions are 1,2,3 and 16. The default is
-currently version 3 but that may change in the future to version 16.
-
-Additionally, dtc performs various sanity checks on the tree, like the
-uniqueness of linux, phandle properties, validity of strings, etc...
-
-The format of the .dts "source" file is "C" like, supports C and C++
-style comments.
-
-/ {
-}
-
-The above is the "device-tree" definition. It's the only statement
-supported currently at the toplevel.
-
-/ {
-  property1 = "string_value";	/* define a property containing a 0
-                                 * terminated string
-				 */
-
-  property2 = <0x1234abcd>;	/* define a property containing a
-                                 * numerical 32-bit value (hexadecimal)
-				 */
-
-  property3 = <0x12345678 0x12345678 0xdeadbeef>;
-                                /* define a property containing 3
-                                 * numerical 32-bit values (cells) in
-                                 * hexadecimal
-				 */
-  property4 = [0x0a 0x0b 0x0c 0x0d 0xde 0xea 0xad 0xbe 0xef];
-                                /* define a property whose content is
-                                 * an arbitrary array of bytes
-                                 */
-
-  childnode@address {	/* define a child node named "childnode"
-                                 * whose unit name is "childnode at
-				 * address"
-                                 */
-
-    childprop = "hello\n";      /* define a property "childprop" of
-                                 * childnode (in this case, a string)
-                                 */
-  };
-};
-
-Nodes can contain other nodes etc... thus defining the hierarchical
-structure of the tree.
-
-Strings support common escape sequences from C: "\n", "\t", "\r",
-"\(octal value)", "\x(hex value)".
-
-It is also suggested that you pipe your source file through cpp (gcc
-preprocessor) so you can use #include's, #define for constants, etc...
-
-Finally, various options are planned but not yet implemented, like
-automatic generation of phandles, labels (exported to the asm file so
-you can point to a property content and change it easily from whatever
-you link the device-tree with), label or path instead of numeric value
-in some cells to "point" to a node (replaced by a phandle at compile
-time), export of reserve map address to the asm file, ability to
-specify reserve map content at compile time, etc...
-
-We may provide a .h include file with common definitions of that
-proves useful for some properties (like building PCI properties or
-interrupt maps) though it may be better to add a notion of struct
-definitions to the compiler...
-
-
-V - Recommendations for a bootloader
-====================================
-
-
-Here are some various ideas/recommendations that have been proposed
-while all this has been defined and implemented.
-
-  - The bootloader may want to be able to use the device-tree itself
-    and may want to manipulate it (to add/edit some properties,
-    like physical memory size or kernel arguments). At this point, 2
-    choices can be made. Either the bootloader works directly on the
-    flattened format, or the bootloader has its own internal tree
-    representation with pointers (similar to the kernel one) and
-    re-flattens the tree when booting the kernel. The former is a bit
-    more difficult to edit/modify, the later requires probably a bit
-    more code to handle the tree structure. Note that the structure
-    format has been designed so it's relatively easy to "insert"
-    properties or nodes or delete them by just memmoving things
-    around. It contains no internal offsets or pointers for this
-    purpose.
-
-  - An example of code for iterating nodes & retrieving properties
-    directly from the flattened tree format can be found in the kernel
-    file drivers/of/fdt.c.  Look at the of_scan_flat_dt() function,
-    its usage in early_init_devtree(), and the corresponding various
-    early_init_dt_scan_*() callbacks. That code can be re-used in a
-    GPL bootloader, and as the author of that code, I would be happy
-    to discuss possible free licensing to any vendor who wishes to
-    integrate all or part of this code into a non-GPL bootloader.
-    (reference needed; who is 'I' here? ---gcl Jan 31, 2011)
-
-
-
-VI - System-on-a-chip devices and nodes
-=======================================
-
-Many companies are now starting to develop system-on-a-chip
-processors, where the processor core (CPU) and many peripheral devices
-exist on a single piece of silicon.  For these SOCs, an SOC node
-should be used that defines child nodes for the devices that make
-up the SOC. While platforms are not required to use this model in
-order to boot the kernel, it is highly encouraged that all SOC
-implementations define as complete a flat-device-tree as possible to
-describe the devices on the SOC.  This will allow for the
-genericization of much of the kernel code.
-
-
-1) Defining child nodes of an SOC
----------------------------------
-
-Each device that is part of an SOC may have its own node entry inside
-the SOC node.  For each device that is included in the SOC, the unit
-address property represents the address offset for this device's
-memory-mapped registers in the parent's address space.  The parent's
-address space is defined by the "ranges" property in the top-level soc
-node. The "reg" property for each node that exists directly under the
-SOC node should contain the address mapping from the child address space
-to the parent SOC address space and the size of the device's
-memory-mapped register file.
-
-For many devices that may exist inside an SOC, there are predefined
-specifications for the format of the device tree node.  All SOC child
-nodes should follow these specifications, except where noted in this
-document.
-
-See appendix A for an example partial SOC node definition for the
-MPC8540.
-
-
-2) Representing devices without a current OF specification
-----------------------------------------------------------
-
-Currently, there are many devices on SoCs that do not have a standard
-representation defined as part of the Open Firmware specifications,
-mainly because the boards that contain these SoCs are not currently
-booted using Open Firmware.  Binding documentation for new devices
-should be added to the Documentation/devicetree/bindings directory.
-That directory will expand as device tree support is added to more and
-more SoCs.
-
-
-VII - Specifying interrupt information for devices
-===================================================
-
-The device tree represents the buses and devices of a hardware
-system in a form similar to the physical bus topology of the
-hardware.
-
-In addition, a logical 'interrupt tree' exists which represents the
-hierarchy and routing of interrupts in the hardware.
-
-The interrupt tree model is fully described in the
-document "Open Firmware Recommended Practice: Interrupt
-Mapping Version 0.9".  The document is available at:
-<http://www.devicetree.org/open-firmware/practice/>
-
-1) interrupts property
-----------------------
-
-Devices that generate interrupts to a single interrupt controller
-should use the conventional OF representation described in the
-OF interrupt mapping documentation.
-
-Each device which generates interrupts must have an 'interrupt'
-property.  The interrupt property value is an arbitrary number of
-of 'interrupt specifier' values which describe the interrupt or
-interrupts for the device.
-
-The encoding of an interrupt specifier is determined by the
-interrupt domain in which the device is located in the
-interrupt tree.  The root of an interrupt domain specifies in
-its #interrupt-cells property the number of 32-bit cells
-required to encode an interrupt specifier.  See the OF interrupt
-mapping documentation for a detailed description of domains.
-
-For example, the binding for the OpenPIC interrupt controller
-specifies  an #interrupt-cells value of 2 to encode the interrupt
-number and level/sense information. All interrupt children in an
-OpenPIC interrupt domain use 2 cells per interrupt in their interrupts
-property.
-
-The PCI bus binding specifies a #interrupt-cells value of 1 to encode
-which interrupt pin (INTA,INTB,INTC,INTD) is used.
-
-2) interrupt-parent property
-----------------------------
-
-The interrupt-parent property is specified to define an explicit
-link between a device node and its interrupt parent in
-the interrupt tree.  The value of interrupt-parent is the
-phandle of the parent node.
-
-If the interrupt-parent property is not defined for a node, its
-interrupt parent is assumed to be an ancestor in the node's
-_device tree_ hierarchy.
-
-3) OpenPIC Interrupt Controllers
---------------------------------
-
-OpenPIC interrupt controllers require 2 cells to encode
-interrupt information.  The first cell defines the interrupt
-number.  The second cell defines the sense and level
-information.
-
-Sense and level information should be encoded as follows:
-
-	0 = low to high edge sensitive type enabled
-	1 = active low level sensitive type enabled
-	2 = active high level sensitive type enabled
-	3 = high to low edge sensitive type enabled
-
-4) ISA Interrupt Controllers
-----------------------------
-
-ISA PIC interrupt controllers require 2 cells to encode
-interrupt information.  The first cell defines the interrupt
-number.  The second cell defines the sense and level
-information.
-
-ISA PIC interrupt controllers should adhere to the ISA PIC
-encodings listed below:
-
-	0 =  active low level sensitive type enabled
-	1 =  active high level sensitive type enabled
-	2 =  high to low edge sensitive type enabled
-	3 =  low to high edge sensitive type enabled
-
-VIII - Specifying Device Power Management Information (sleep property)
-===================================================================
-
-Devices on SOCs often have mechanisms for placing devices into low-power
-states that are decoupled from the devices' own register blocks.  Sometimes,
-this information is more complicated than a cell-index property can
-reasonably describe.  Thus, each device controlled in such a manner
-may contain a "sleep" property which describes these connections.
-
-The sleep property consists of one or more sleep resources, each of
-which consists of a phandle to a sleep controller, followed by a
-controller-specific sleep specifier of zero or more cells.
-
-The semantics of what type of low power modes are possible are defined
-by the sleep controller.  Some examples of the types of low power modes
-that may be supported are:
-
- - Dynamic: The device may be disabled or enabled at any time.
- - System Suspend: The device may request to be disabled or remain
-   awake during system suspend, but will not be disabled until then.
- - Permanent: The device is disabled permanently (until the next hard
-   reset).
-
-Some devices may share a clock domain with each other, such that they should
-only be suspended when none of the devices are in use.  Where reasonable,
-such nodes should be placed on a virtual bus, where the bus has the sleep
-property.  If the clock domain is shared among devices that cannot be
-reasonably grouped in this manner, then create a virtual sleep controller
-(similar to an interrupt nexus, except that defining a standardized
-sleep-map should wait until its necessity is demonstrated).
-
-IX - Specifying dma bus information
-
-Some devices may have DMA memory range shifted relatively to the beginning of
-RAM, or even placed outside of kernel RAM. For example, the Keystone 2 SoC
-worked in LPAE mode with 4G memory has:
-- RAM range: [0x8 0000 0000, 0x8 FFFF FFFF]
-- DMA range: [  0x8000 0000,   0xFFFF FFFF]
-and DMA range is aliased into first 2G of RAM in HW.
-
-In such cases, DMA addresses translation should be performed between CPU phys
-and DMA addresses. The "dma-ranges" property is intended to be used
-for describing the configuration of such system in DT.
-
-In addition, each DMA master device on the DMA bus may or may not support
-coherent DMA operations. The "dma-coherent" property is intended to be used
-for identifying devices supported coherent DMA operations in DT.
-
-* DMA Bus master
-Optional property:
-- dma-ranges: <prop-encoded-array> encoded as arbitrary number of triplets of
-	(child-bus-address, parent-bus-address, length). Each triplet specified
-	describes a contiguous DMA address range.
-	The dma-ranges property is used to describe the direct memory access (DMA)
-	structure of a memory-mapped bus whose device tree parent can be accessed
-	from DMA operations originating from the bus. It provides a means of
-	defining a mapping or translation between the physical address space of
-	the bus and the physical address space of the parent of the bus.
-	(for more information see the Devicetree Specification)
-
-* DMA Bus child
-Optional property:
-- dma-ranges: <empty> value. if present - It means that DMA addresses
-	translation has to be enabled for this device.
-- dma-coherent: Present if dma operations are coherent
-
-Example:
-soc {
-		compatible = "ti,keystone","simple-bus";
-		ranges = <0x0 0x0 0x0 0xc0000000>;
-		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
-
-		[...]
-
-		usb: usb@2680000 {
-			compatible = "ti,keystone-dwc3";
-
-			[...]
-			dma-coherent;
-		};
-};
-
-Appendix A - Sample SOC node for MPC8540
-========================================
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8540-ccsr", "simple-bus";
-		device_type = "soc";
-		ranges = <0x00000000 0xe0000000 0x00100000>
-		bus-frequency = <0>;
-		interrupt-parent = <&pic>;
-
-		ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar", "simple-bus";
-			reg = <0x24000 0x1000>;
-			local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x00 ];
-			interrupts = <0x29 2 0x30 2 0x34 2>;
-			phy-handle = <&phy0>;
-			sleep = <&pmc 0x00000080>;
-			ranges;
-
-			mdio@24520 {
-				reg = <0x24520 0x20>;
-				compatible = "fsl,gianfar-mdio";
-
-				phy0: ethernet-phy@0 {
-					interrupts = <5 1>;
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					interrupts = <5 1>;
-					reg = <1>;
-				};
-
-				phy3: ethernet-phy@3 {
-					interrupts = <7 1>;
-					reg = <3>;
-				};
-			};
-		};
-
-		ethernet@25000 {
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x01 ];
-			interrupts = <0x13 2 0x14 2 0x18 2>;
-			phy-handle = <&phy1>;
-			sleep = <&pmc 0x00000040>;
-		};
-
-		ethernet@26000 {
-			device_type = "network";
-			model = "FEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x02 ];
-			interrupts = <0x41 2>;
-			phy-handle = <&phy3>;
-			sleep = <&pmc 0x00000020>;
-		};
-
-		serial@4500 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8540-duart", "simple-bus";
-			sleep = <&pmc 0x00000002>;
-			ranges;
-
-			serial@4500 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x4500 0x100>;
-				clock-frequency = <0>;
-				interrupts = <0x42 2>;
-			};
-
-			serial@4600 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x4600 0x100>;
-				clock-frequency = <0>;
-				interrupts = <0x42 2>;
-			};
-		};
-
-		pic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		i2c@3000 {
-			interrupts = <0x43 2>;
-			reg = <0x3000 0x100>;
-			compatible  = "fsl-i2c";
-			dfsrr;
-			sleep = <&pmc 0x00000004>;
-		};
-
-		pmc: power@e0070 {
-			compatible = "fsl,mpc8540-pmc", "fsl,mpc8548-pmc";
-			reg = <0xe0070 0x20>;
-		};
-	};
diff --git a/Documentation/devicetree/changesets.rst b/Documentation/devicetree/changesets.rst
new file mode 100644
index 000000000000..2091468d4837
--- /dev/null
+++ b/Documentation/devicetree/changesets.rst
@@ -0,0 +1,37 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+Devicetree Changesets
+=====================
+
+A Devicetree changeset is a method which allows one to apply changes
+in the live tree in such a way that either the full set of changes
+will be applied, or none of them will be. If an error occurs partway
+through applying the changeset, then the tree will be rolled back to the
+previous state. A changeset can also be removed after it has been
+applied.
+
+When a changeset is applied, all of the changes get applied to the tree
+at once before emitting OF_RECONFIG notifiers. This is so that the
+receiver sees a complete and consistent state of the tree when it
+receives the notifier.
+
+The sequence of a changeset is as follows.
+
+1. of_changeset_init() - initializes a changeset
+
+2. A number of DT tree change calls, of_changeset_attach_node(),
+   of_changeset_detach_node(), of_changeset_add_property(),
+   of_changeset_remove_property, of_changeset_update_property() to prepare
+   a set of changes. No changes to the active tree are made at this point.
+   All the change operations are recorded in the of_changeset 'entries'
+   list.
+
+3. of_changeset_apply() - Apply the changes to the tree. Either the
+   entire changeset will get applied, or if there is an error the tree will
+   be restored to the previous state. The core ensures proper serialization
+   through locking. An unlocked version __of_changeset_apply is available,
+   if needed.
+
+If a successfully applied changeset needs to be removed, it can be done
+with of_changeset_revert().
diff --git a/Documentation/devicetree/changesets.txt b/Documentation/devicetree/changesets.txt
deleted file mode 100644
index cb488eeb6353..000000000000
--- a/Documentation/devicetree/changesets.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-A DT changeset is a method which allows one to apply changes
-in the live tree in such a way that either the full set of changes
-will be applied, or none of them will be. If an error occurs partway
-through applying the changeset, then the tree will be rolled back to the
-previous state. A changeset can also be removed after it has been
-applied.
-
-When a changeset is applied, all of the changes get applied to the tree
-at once before emitting OF_RECONFIG notifiers. This is so that the
-receiver sees a complete and consistent state of the tree when it
-receives the notifier.
-
-The sequence of a changeset is as follows.
-
-1. of_changeset_init() - initializes a changeset
-
-2. A number of DT tree change calls, of_changeset_attach_node(),
-of_changeset_detach_node(), of_changeset_add_property(),
-of_changeset_remove_property, of_changeset_update_property() to prepare
-a set of changes. No changes to the active tree are made at this point.
-All the change operations are recorded in the of_changeset 'entries'
-list.
-
-3. of_changeset_apply() - Apply the changes to the tree. Either the
-entire changeset will get applied, or if there is an error the tree will
-be restored to the previous state. The core ensures proper serialization
-through locking. An unlocked version __of_changeset_apply is available,
-if needed.
-
-If a successfully applied changeset needs to be removed, it can be done
-with of_changeset_revert().
diff --git a/Documentation/devicetree/dynamic-resolution-notes.rst b/Documentation/devicetree/dynamic-resolution-notes.rst
new file mode 100644
index 000000000000..f81ad8daa36f
--- /dev/null
+++ b/Documentation/devicetree/dynamic-resolution-notes.rst
@@ -0,0 +1,27 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================
+Devicetree Dynamic Resolver Notes
+=================================
+
+This document describes the implementation of the in-kernel
+DeviceTree resolver, residing in drivers/of/resolver.c
+
+How the resolver works
+----------------------
+
+The resolver is given as an input an arbitrary tree compiled with the
+proper dtc option and having a /plugin/ tag. This generates the
+appropriate __fixups__ & __local_fixups__ nodes.
+
+In sequence the resolver works by the following steps:
+
+1. Get the maximum device tree phandle value from the live tree + 1.
+2. Adjust all the local phandles of the tree to resolve by that amount.
+3. Using the __local__fixups__ node information adjust all local references
+   by the same amount.
+4. For each property in the __fixups__ node locate the node it references
+   in the live tree. This is the label used to tag the node.
+5. Retrieve the phandle of the target of the fixup.
+6. For each fixup in the property locate the node:property:offset location
+   and replace it with the phandle value.
diff --git a/Documentation/devicetree/dynamic-resolution-notes.txt b/Documentation/devicetree/dynamic-resolution-notes.txt
deleted file mode 100644
index c24ec366c5dc..000000000000
--- a/Documentation/devicetree/dynamic-resolution-notes.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Device Tree Dynamic Resolver Notes
-----------------------------------
-
-This document describes the implementation of the in-kernel
-Device Tree resolver, residing in drivers/of/resolver.c
-
-How the resolver works
-----------------------
-
-The resolver is given as an input an arbitrary tree compiled with the
-proper dtc option and having a /plugin/ tag. This generates the
-appropriate __fixups__ & __local_fixups__ nodes.
-
-In sequence the resolver works by the following steps:
-
-1. Get the maximum device tree phandle value from the live tree + 1.
-2. Adjust all the local phandles of the tree to resolve by that amount.
-3. Using the __local__fixups__ node information adjust all local references
-   by the same amount.
-4. For each property in the __fixups__ node locate the node it references
-   in the live tree. This is the label used to tag the node.
-5. Retrieve the phandle of the target of the fixup.
-6. For each fixup in the property locate the node:property:offset location
-   and replace it with the phandle value.
diff --git a/Documentation/devicetree/index.rst b/Documentation/devicetree/index.rst
new file mode 100644
index 000000000000..1a2fc8014996
--- /dev/null
+++ b/Documentation/devicetree/index.rst
@@ -0,0 +1,30 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+Open Firmware and Devicetree
+=============================
+
+Kernel Devicetree Usage
+=======================
+.. toctree::
+   :maxdepth: 1
+
+   usage-model
+   of_unittest
+   kernel-api
+
+Devicetree Overlays
+===================
+.. toctree::
+   :maxdepth: 1
+
+   changesets
+   dynamic-resolution-notes
+   overlay-notes
+
+Devicetree Bindings
+===================
+.. toctree::
+   :maxdepth: 1
+
+   bindings/index
diff --git a/Documentation/devicetree/kernel-api.rst b/Documentation/devicetree/kernel-api.rst
new file mode 100644
index 000000000000..b7429e6ed6d5
--- /dev/null
+++ b/Documentation/devicetree/kernel-api.rst
@@ -0,0 +1,57 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. _devicetree:
+
+======================================
+DeviceTree Kernel API
+======================================
+
+Core functions
+--------------
+
+.. kernel-doc:: drivers/of/base.c
+   :export:
+
+.. kernel-doc:: include/linux/of.h
+   :internal:
+
+.. kernel-doc:: drivers/of/property.c
+   :export:
+
+.. kernel-doc:: include/linux/of_graph.h
+   :internal:
+
+.. kernel-doc:: drivers/of/address.c
+   :export:
+
+.. kernel-doc:: drivers/of/irq.c
+   :export:
+
+.. kernel-doc:: drivers/of/fdt.c
+   :export:
+
+Driver model functions
+----------------------
+
+.. kernel-doc:: include/linux/of_device.h
+   :internal:
+
+.. kernel-doc:: drivers/of/device.c
+   :export:
+
+.. kernel-doc:: include/linux/of_platform.h
+   :internal:
+
+.. kernel-doc:: drivers/of/platform.c
+   :export:
+
+Overlay and Dynamic DT functions
+--------------------------------
+
+.. kernel-doc:: drivers/of/resolver.c
+   :export:
+
+.. kernel-doc:: drivers/of/dynamic.c
+   :export:
+
+.. kernel-doc:: drivers/of/overlay.c
+   :export:
diff --git a/Documentation/devicetree/of_unittest.rst b/Documentation/devicetree/of_unittest.rst
new file mode 100644
index 000000000000..8864b52d1195
--- /dev/null
+++ b/Documentation/devicetree/of_unittest.rst
@@ -0,0 +1,226 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================
+Open Firmware Devicetree Unittest
+=================================
+
+Author: Gaurav Minocha <gaurav.minocha.os@gmail.com>
+
+1. Introduction
+===============
+
+This document explains how the test data required for executing OF unittest
+is attached to the live tree dynamically, independent of the machine's
+architecture.
+
+It is recommended to read the following documents before moving ahead.
+
+(1) Documentation/devicetree/usage-model.rst
+(2) http://www.devicetree.org/Device_Tree_Usage
+
+OF Selftest has been designed to test the interface (include/linux/of.h)
+provided to device driver developers to fetch the device information..etc.
+from the unflattened device tree data structure. This interface is used by
+most of the device drivers in various use cases.
+
+
+2. Verbose Output (EXPECT)
+==========================
+
+If unittest detects a problem it will print a warning or error message to
+the console.  Unittest also triggers warning and error messages from other
+kernel code as a result of intentionally bad unittest data.  This has led
+to confusion as to whether the triggered messages are an expected result
+of a test or whether there is a real problem that is independent of unittest.
+
+'EXPECT \ : text' (begin) and 'EXPECT / : text' (end) messages have been
+added to unittest to report that a warning or error is expected.  The
+begin is printed before triggering the warning or error, and the end is
+printed after triggering the warning or error.
+
+The EXPECT messages result in very noisy console messages that are difficult
+to read.  The script scripts/dtc/of_unittest_expect was created to filter
+this verbosity and highlight mismatches between triggered warnings and
+errors vs expected warnings and errors.  More information is available
+from 'scripts/dtc/of_unittest_expect --help'.
+
+
+3. Test-data
+============
+
+The Device Tree Source file (drivers/of/unittest-data/testcases.dts) contains
+the test data required for executing the unit tests automated in
+drivers/of/unittest.c. Currently, following Device Tree Source Include files
+(.dtsi) are included in testcases.dts::
+
+    drivers/of/unittest-data/tests-interrupts.dtsi
+    drivers/of/unittest-data/tests-platform.dtsi
+    drivers/of/unittest-data/tests-phandle.dtsi
+    drivers/of/unittest-data/tests-match.dtsi
+
+When the kernel is build with OF_SELFTEST enabled, then the following make
+rule::
+
+    $(obj)/%.dtb: $(src)/%.dts FORCE
+	    $(call if_changed_dep, dtc)
+
+is used to compile the DT source file (testcases.dts) into a binary blob
+(testcases.dtb), also referred as flattened DT.
+
+After that, using the following rule the binary blob above is wrapped as an
+assembly file (testcases.dtb.S)::
+
+    $(obj)/%.dtb.S: $(obj)/%.dtb
+	    $(call cmd, dt_S_dtb)
+
+The assembly file is compiled into an object file (testcases.dtb.o), and is
+linked into the kernel image.
+
+
+3.1. Adding the test data
+-------------------------
+
+Un-flattened device tree structure:
+
+Un-flattened device tree consists of connected device_node(s) in form of a tree
+structure described below::
+
+    // following struct members are used to construct the tree
+    struct device_node {
+	...
+	struct  device_node *parent;
+	struct  device_node *child;
+	struct  device_node *sibling;
+	...
+    };
+
+Figure 1, describes a generic structure of machine's un-flattened device tree
+considering only child and sibling pointers. There exists another pointer,
+``*parent``, that is used to traverse the tree in the reverse direction. So, at
+a particular level the child node and all the sibling nodes will have a parent
+pointer pointing to a common node (e.g. child1, sibling2, sibling3, sibling4's
+parent points to root node)::
+
+    root ('/')
+    |
+    child1 -> sibling2 -> sibling3 -> sibling4 -> null
+    |         |           |           |
+    |         |           |          null
+    |         |           |
+    |         |        child31 -> sibling32 -> null
+    |         |           |          |
+    |         |          null       null
+    |         |
+    |      child21 -> sibling22 -> sibling23 -> null
+    |         |          |            |
+    |        null       null         null
+    |
+    child11 -> sibling12 -> sibling13 -> sibling14 -> null
+    |           |           |            |
+    |           |           |           null
+    |           |           |
+    null        null       child131 -> null
+			    |
+			    null
+
+Figure 1: Generic structure of un-flattened device tree
+
+
+Before executing OF unittest, it is required to attach the test data to
+machine's device tree (if present). So, when selftest_data_add() is called,
+at first it reads the flattened device tree data linked into the kernel image
+via the following kernel symbols::
+
+    __dtb_testcases_begin - address marking the start of test data blob
+    __dtb_testcases_end   - address marking the end of test data blob
+
+Secondly, it calls of_fdt_unflatten_tree() to unflatten the flattened
+blob. And finally, if the machine's device tree (i.e live tree) is present,
+then it attaches the unflattened test data tree to the live tree, else it
+attaches itself as a live device tree.
+
+attach_node_and_children() uses of_attach_node() to attach the nodes into the
+live tree as explained below. To explain the same, the test data tree described
+in Figure 2 is attached to the live tree described in Figure 1::
+
+    root ('/')
+	|
+    testcase-data
+	|
+    test-child0 -> test-sibling1 -> test-sibling2 -> test-sibling3 -> null
+	|               |                |                |
+    test-child01      null             null             null
+
+
+Figure 2: Example test data tree to be attached to live tree.
+
+According to the scenario above, the live tree is already present so it isn't
+required to attach the root('/') node. All other nodes are attached by calling
+of_attach_node() on each node.
+
+In the function of_attach_node(), the new node is attached as the child of the
+given parent in live tree. But, if parent already has a child then the new node
+replaces the current child and turns it into its sibling. So, when the testcase
+data node is attached to the live tree above (Figure 1), the final structure is
+as shown in Figure 3::
+
+    root ('/')
+    |
+    testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
+    |               |          |           |           |
+    (...)             |          |           |          null
+		    |          |         child31 -> sibling32 -> null
+		    |          |           |           |
+		    |          |          null        null
+		    |          |
+		    |        child21 -> sibling22 -> sibling23 -> null
+		    |          |           |            |
+		    |         null        null         null
+		    |
+		    child11 -> sibling12 -> sibling13 -> sibling14 -> null
+		    |          |            |            |
+		    null       null          |           null
+					    |
+					    child131 -> null
+					    |
+					    null
+    -----------------------------------------------------------------------
+
+    root ('/')
+    |
+    testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
+    |               |          |           |           |
+    |             (...)      (...)       (...)        null
+    |
+    test-sibling3 -> test-sibling2 -> test-sibling1 -> test-child0 -> null
+    |                |                   |                |
+    null             null                null         test-child01
+
+
+Figure 3: Live device tree structure after attaching the testcase-data.
+
+
+Astute readers would have noticed that test-child0 node becomes the last
+sibling compared to the earlier structure (Figure 2). After attaching first
+test-child0 the test-sibling1 is attached that pushes the child node
+(i.e. test-child0) to become a sibling and makes itself a child node,
+as mentioned above.
+
+If a duplicate node is found (i.e. if a node with same full_name property is
+already present in the live tree), then the node isn't attached rather its
+properties are updated to the live tree's node by calling the function
+update_node_properties().
+
+
+3.2. Removing the test data
+---------------------------
+
+Once the test case execution is complete, selftest_data_remove is called in
+order to remove the device nodes attached initially (first the leaf nodes are
+detached and then moving up the parent nodes are removed, and eventually the
+whole tree). selftest_data_remove() calls detach_node_and_children() that uses
+of_detach_node() to detach the nodes from the live device tree.
+
+To detach a node, of_detach_node() either updates the child pointer of given
+node's parent to its sibling or attaches the previous sibling to the given
+node's sibling, as appropriate. That is it :)
diff --git a/Documentation/devicetree/of_unittest.txt b/Documentation/devicetree/of_unittest.txt
deleted file mode 100644
index 3e4e7d48ae93..000000000000
--- a/Documentation/devicetree/of_unittest.txt
+++ /dev/null
@@ -1,197 +0,0 @@
-Open Firmware Device Tree Unittest
-----------------------------------
-
-Author: Gaurav Minocha <gaurav.minocha.os@gmail.com>
-
-1. Introduction
-
-This document explains how the test data required for executing OF unittest
-is attached to the live tree dynamically, independent of the machine's
-architecture.
-
-It is recommended to read the following documents before moving ahead.
-
-[1] Documentation/devicetree/usage-model.txt
-[2] http://www.devicetree.org/Device_Tree_Usage
-
-OF Selftest has been designed to test the interface (include/linux/of.h)
-provided to device driver developers to fetch the device information..etc.
-from the unflattened device tree data structure. This interface is used by
-most of the device drivers in various use cases.
-
-
-2. Test-data
-
-The Device Tree Source file (drivers/of/unittest-data/testcases.dts) contains
-the test data required for executing the unit tests automated in
-drivers/of/unittest.c. Currently, following Device Tree Source Include files
-(.dtsi) are included in testcases.dts:
-
-drivers/of/unittest-data/tests-interrupts.dtsi
-drivers/of/unittest-data/tests-platform.dtsi
-drivers/of/unittest-data/tests-phandle.dtsi
-drivers/of/unittest-data/tests-match.dtsi
-
-When the kernel is build with OF_SELFTEST enabled, then the following make rule
-
-$(obj)/%.dtb: $(src)/%.dts FORCE
-	$(call if_changed_dep, dtc)
-
-is used to compile the DT source file (testcases.dts) into a binary blob
-(testcases.dtb), also referred as flattened DT.
-
-After that, using the following rule the binary blob above is wrapped as an
-assembly file (testcases.dtb.S).
-
-$(obj)/%.dtb.S: $(obj)/%.dtb
-	$(call cmd, dt_S_dtb)
-
-The assembly file is compiled into an object file (testcases.dtb.o), and is
-linked into the kernel image.
-
-
-2.1. Adding the test data
-
-Un-flattened device tree structure:
-
-Un-flattened device tree consists of connected device_node(s) in form of a tree
-structure described below.
-
-// following struct members are used to construct the tree
-struct device_node {
-    ...
-    struct  device_node *parent;
-    struct  device_node *child;
-    struct  device_node *sibling;
-    ...
- };
-
-Figure 1, describes a generic structure of machine's un-flattened device tree
-considering only child and sibling pointers. There exists another pointer,
-*parent, that is used to traverse the tree in the reverse direction. So, at
-a particular level the child node and all the sibling nodes will have a parent
-pointer pointing to a common node (e.g. child1, sibling2, sibling3, sibling4's
-parent points to root node)
-
-root ('/')
-   |
-child1 -> sibling2 -> sibling3 -> sibling4 -> null
-   |         |           |           |
-   |         |           |          null
-   |         |           |
-   |         |        child31 -> sibling32 -> null
-   |         |           |          |
-   |         |          null       null
-   |         |
-   |      child21 -> sibling22 -> sibling23 -> null
-   |         |          |            |
-   |        null       null         null
-   |
-child11 -> sibling12 -> sibling13 -> sibling14 -> null
-   |           |           |            |
-   |           |           |           null
-   |           |           |
-  null        null       child131 -> null
-                           |
-                          null
-
-Figure 1: Generic structure of un-flattened device tree
-
-
-Before executing OF unittest, it is required to attach the test data to
-machine's device tree (if present). So, when selftest_data_add() is called,
-at first it reads the flattened device tree data linked into the kernel image
-via the following kernel symbols:
-
-__dtb_testcases_begin - address marking the start of test data blob
-__dtb_testcases_end   - address marking the end of test data blob
-
-Secondly, it calls of_fdt_unflatten_tree() to unflatten the flattened
-blob. And finally, if the machine's device tree (i.e live tree) is present,
-then it attaches the unflattened test data tree to the live tree, else it
-attaches itself as a live device tree.
-
-attach_node_and_children() uses of_attach_node() to attach the nodes into the
-live tree as explained below. To explain the same, the test data tree described
- in Figure 2 is attached to the live tree described in Figure 1.
-
-root ('/')
-    |
- testcase-data
-    |
- test-child0 -> test-sibling1 -> test-sibling2 -> test-sibling3 -> null
-    |               |                |                |
- test-child01      null             null             null
-
-
-Figure 2: Example test data tree to be attached to live tree.
-
-According to the scenario above, the live tree is already present so it isn't
-required to attach the root('/') node. All other nodes are attached by calling
-of_attach_node() on each node.
-
-In the function of_attach_node(), the new node is attached as the child of the
-given parent in live tree. But, if parent already has a child then the new node
-replaces the current child and turns it into its sibling. So, when the testcase
-data node is attached to the live tree above (Figure 1), the final structure is
- as shown in Figure 3.
-
-root ('/')
-   |
-testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
-   |               |          |           |           |
- (...)             |          |           |          null
-                   |          |         child31 -> sibling32 -> null
-                   |          |           |           |
-                   |          |          null        null
-                   |          |
-                   |        child21 -> sibling22 -> sibling23 -> null
-                   |          |           |            |
-                   |         null        null         null
-                   |
-                child11 -> sibling12 -> sibling13 -> sibling14 -> null
-                   |          |            |            |
-                  null       null          |           null
-                                           |
-                                        child131 -> null
-                                           |
-                                          null
------------------------------------------------------------------------
-
-root ('/')
-   |
-testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
-   |               |          |           |           |
-   |             (...)      (...)       (...)        null
-   |
-test-sibling3 -> test-sibling2 -> test-sibling1 -> test-child0 -> null
-   |                |                   |                |
-  null             null                null         test-child01
-
-
-Figure 3: Live device tree structure after attaching the testcase-data.
-
-
-Astute readers would have noticed that test-child0 node becomes the last
-sibling compared to the earlier structure (Figure 2). After attaching first
-test-child0 the test-sibling1 is attached that pushes the child node
-(i.e. test-child0) to become a sibling and makes itself a child node,
- as mentioned above.
-
-If a duplicate node is found (i.e. if a node with same full_name property is
-already present in the live tree), then the node isn't attached rather its
-properties are updated to the live tree's node by calling the function
-update_node_properties().
-
-
-2.2. Removing the test data
-
-Once the test case execution is complete, selftest_data_remove is called in
-order to remove the device nodes attached initially (first the leaf nodes are
-detached and then moving up the parent nodes are removed, and eventually the
-whole tree). selftest_data_remove() calls detach_node_and_children() that uses
-of_detach_node() to detach the nodes from the live device tree.
-
-To detach a node, of_detach_node() either updates the child pointer of given
-node's parent to its sibling or attaches the previous sibling to the given
-node's sibling, as appropriate. That is it :)
diff --git a/Documentation/devicetree/overlay-notes.rst b/Documentation/devicetree/overlay-notes.rst
new file mode 100644
index 000000000000..e139f22b363e
--- /dev/null
+++ b/Documentation/devicetree/overlay-notes.rst
@@ -0,0 +1,150 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Devicetree Overlay Notes
+========================
+
+This document describes the implementation of the in-kernel
+device tree overlay functionality residing in drivers/of/overlay.c and is a
+companion document to Documentation/devicetree/dynamic-resolution-notes.rst[1]
+
+How overlays work
+-----------------
+
+A Devicetree's overlay purpose is to modify the kernel's live tree, and
+have the modification affecting the state of the kernel in a way that
+is reflecting the changes.
+Since the kernel mainly deals with devices, any new device node that result
+in an active device should have it created while if the device node is either
+disabled or removed all together, the affected device should be deregistered.
+
+Lets take an example where we have a foo board with the following base tree::
+
+    ---- foo.dts ---------------------------------------------------------------
+	/* FOO platform */
+	/dts-v1/;
+	/ {
+		compatible = "corp,foo";
+
+		/* shared resources */
+		res: res {
+		};
+
+		/* On chip peripherals */
+		ocp: ocp {
+			/* peripherals that are always instantiated */
+			peripheral1 { ... };
+		};
+	};
+    ---- foo.dts ---------------------------------------------------------------
+
+The overlay bar.dts,
+::
+
+    ---- bar.dts - overlay target location by label ----------------------------
+	/dts-v1/;
+	/plugin/;
+	&ocp {
+		/* bar peripheral */
+		bar {
+			compatible = "corp,bar";
+			... /* various properties and child nodes */
+		};
+	};
+    ---- bar.dts ---------------------------------------------------------------
+
+when loaded (and resolved as described in [1]) should result in foo+bar.dts::
+
+    ---- foo+bar.dts -----------------------------------------------------------
+	/* FOO platform + bar peripheral */
+	/ {
+		compatible = "corp,foo";
+
+		/* shared resources */
+		res: res {
+		};
+
+		/* On chip peripherals */
+		ocp: ocp {
+			/* peripherals that are always instantiated */
+			peripheral1 { ... };
+
+			/* bar peripheral */
+			bar {
+				compatible = "corp,bar";
+				... /* various properties and child nodes */
+			};
+		};
+	};
+    ---- foo+bar.dts -----------------------------------------------------------
+
+As a result of the overlay, a new device node (bar) has been created
+so a bar platform device will be registered and if a matching device driver
+is loaded the device will be created as expected.
+
+If the base DT was not compiled with the -@ option then the "&ocp" label
+will not be available to resolve the overlay node(s) to the proper location
+in the base DT. In this case, the target path can be provided. The target
+location by label syntax is preferred because the overlay can be applied to
+any base DT containing the label, no matter where the label occurs in the DT.
+
+The above bar.dts example modified to use target path syntax is::
+
+    ---- bar.dts - overlay target location by explicit path --------------------
+	/dts-v1/;
+	/plugin/;
+	&{/ocp} {
+		/* bar peripheral */
+		bar {
+			compatible = "corp,bar";
+			... /* various properties and child nodes */
+		}
+	};
+    ---- bar.dts ---------------------------------------------------------------
+
+
+Overlay in-kernel API
+--------------------------------
+
+The API is quite easy to use.
+
+1) Call of_overlay_fdt_apply() to create and apply an overlay changeset. The
+   return value is an error or a cookie identifying this overlay.
+
+2) Call of_overlay_remove() to remove and cleanup the overlay changeset
+   previously created via the call to of_overlay_fdt_apply(). Removal of an
+   overlay changeset that is stacked by another will not be permitted.
+
+Finally, if you need to remove all overlays in one-go, just call
+of_overlay_remove_all() which will remove every single one in the correct
+order.
+
+There is the option to register notifiers that get called on
+overlay operations. See of_overlay_notifier_register/unregister and
+enum of_overlay_notify_action for details.
+
+A notifier callback for OF_OVERLAY_PRE_APPLY, OF_OVERLAY_POST_APPLY, or
+OF_OVERLAY_PRE_REMOVE may store pointers to a device tree node in the overlay
+or its content but these pointers must not persist past the notifier callback
+for OF_OVERLAY_POST_REMOVE.  The memory containing the overlay will be
+kfree()ed after OF_OVERLAY_POST_REMOVE notifiers are called.  Note that the
+memory will be kfree()ed even if the notifier for OF_OVERLAY_POST_REMOVE
+returns an error.
+
+The changeset notifiers in drivers/of/dynamic.c are a second type of notifier
+that could be triggered by applying or removing an overlay.  These notifiers
+are not allowed to store pointers to a device tree node in the overlay
+or its content.  The overlay code does not protect against such pointers
+remaining active when the memory containing the overlay is freed as a result
+of removing the overlay.
+
+Any other code that retains a pointer to the overlay nodes or data is
+considered to be a bug because after removing the overlay the pointer
+will refer to freed memory.
+
+Users of overlays must be especially aware of the overall operations that
+occur on the system to ensure that other kernel code does not retain any
+pointers to the overlay nodes or data.  Any example of an inadvertent use
+of such pointers is if a driver or subsystem module is loaded after an
+overlay has been applied, and the driver or subsystem scans the entire
+devicetree or a large portion of it, including the overlay nodes.
diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt
deleted file mode 100644
index 725fb8d255c1..000000000000
--- a/Documentation/devicetree/overlay-notes.txt
+++ /dev/null
@@ -1,139 +0,0 @@
-Device Tree Overlay Notes
--------------------------
-
-This document describes the implementation of the in-kernel
-device tree overlay functionality residing in drivers/of/overlay.c and is a
-companion document to Documentation/devicetree/dynamic-resolution-notes.txt[1]
-
-How overlays work
------------------
-
-A Device Tree's overlay purpose is to modify the kernel's live tree, and
-have the modification affecting the state of the kernel in a way that
-is reflecting the changes.
-Since the kernel mainly deals with devices, any new device node that result
-in an active device should have it created while if the device node is either
-disabled or removed all together, the affected device should be deregistered.
-
-Lets take an example where we have a foo board with the following base tree:
-
----- foo.dts -----------------------------------------------------------------
-	/* FOO platform */
-	/ {
-		compatible = "corp,foo";
-
-		/* shared resources */
-		res: res {
-		};
-
-		/* On chip peripherals */
-		ocp: ocp {
-			/* peripherals that are always instantiated */
-			peripheral1 { ... };
-		}
-	};
----- foo.dts -----------------------------------------------------------------
-
-The overlay bar.dts, when loaded (and resolved as described in [1]) should
-
----- bar.dts -----------------------------------------------------------------
-/plugin/;	/* allow undefined label references and record them */
-/ {
-	....	/* various properties for loader use; i.e. part id etc. */
-	fragment@0 {
-		target = <&ocp>;
-		__overlay__ {
-			/* bar peripheral */
-			bar {
-				compatible = "corp,bar";
-				... /* various properties and child nodes */
-			}
-		};
-	};
-};
----- bar.dts -----------------------------------------------------------------
-
-result in foo+bar.dts
-
----- foo+bar.dts -------------------------------------------------------------
-	/* FOO platform + bar peripheral */
-	/ {
-		compatible = "corp,foo";
-
-		/* shared resources */
-		res: res {
-		};
-
-		/* On chip peripherals */
-		ocp: ocp {
-			/* peripherals that are always instantiated */
-			peripheral1 { ... };
-
-			/* bar peripheral */
-			bar {
-				compatible = "corp,bar";
-				... /* various properties and child nodes */
-			}
-		}
-	};
----- foo+bar.dts -------------------------------------------------------------
-
-As a result of the overlay, a new device node (bar) has been created
-so a bar platform device will be registered and if a matching device driver
-is loaded the device will be created as expected.
-
-Overlay in-kernel API
---------------------------------
-
-The API is quite easy to use.
-
-1. Call of_overlay_fdt_apply() to create and apply an overlay changeset. The
-return value is an error or a cookie identifying this overlay.
-
-2. Call of_overlay_remove() to remove and cleanup the overlay changeset
-previously created via the call to of_overlay_fdt_apply(). Removal of an
-overlay changeset that is stacked by another will not be permitted.
-
-Finally, if you need to remove all overlays in one-go, just call
-of_overlay_remove_all() which will remove every single one in the correct
-order.
-
-In addition, there is the option to register notifiers that get called on
-overlay operations. See of_overlay_notifier_register/unregister and
-enum of_overlay_notify_action for details.
-
-Note that a notifier callback is not supposed to store pointers to a device
-tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the
-respective node it received.
-
-Overlay DTS Format
-------------------
-
-The DTS of an overlay should have the following format:
-
-{
-	/* ignored properties by the overlay */
-
-	fragment@0 {	/* first child node */
-
-		target=<phandle>;	/* phandle target of the overlay */
-	or
-		target-path="/path";	/* target path of the overlay */
-
-		__overlay__ {
-			property-a;	/* add property-a to the target */
-			node-a {	/* add to an existing, or create a node-a */
-				...
-			};
-		};
-	}
-	fragment@1 {	/* second child node */
-		...
-	};
-	/* more fragments follow */
-}
-
-Using the non-phandle based target method allows one to use a base DT which does
-not contain a __symbols__ node, i.e. it was not compiled with the -@ option.
-The __symbols__ node is only required for the target=<phandle> method, since it
-contains the information required to map from a phandle to a tree location.
diff --git a/Documentation/devicetree/usage-model.rst b/Documentation/devicetree/usage-model.rst
new file mode 100644
index 000000000000..b6a287955ee5
--- /dev/null
+++ b/Documentation/devicetree/usage-model.rst
@@ -0,0 +1,420 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Linux and the Devicetree
+========================
+
+The Linux usage model for device tree data
+
+:Author: Grant Likely <grant.likely@secretlab.ca>
+
+This article describes how Linux uses the device tree.  An overview of
+the device tree data format can be found on the device tree usage page
+at devicetree.org\ [1]_.
+
+.. [1] https://www.devicetree.org/specifications/
+
+The "Open Firmware Device Tree", or simply Devicetree (DT), is a data
+structure and language for describing hardware.  More specifically, it
+is a description of hardware that is readable by an operating system
+so that the operating system doesn't need to hard code details of the
+machine.
+
+Structurally, the DT is a tree, or acyclic graph with named nodes, and
+nodes may have an arbitrary number of named properties encapsulating
+arbitrary data.  A mechanism also exists to create arbitrary
+links from one node to another outside of the natural tree structure.
+
+Conceptually, a common set of usage conventions, called 'bindings',
+is defined for how data should appear in the tree to describe typical
+hardware characteristics including data busses, interrupt lines, GPIO
+connections, and peripheral devices.
+
+As much as possible, hardware is described using existing bindings to
+maximize use of existing support code, but since property and node
+names are simply text strings, it is easy to extend existing bindings
+or create new ones by defining new nodes and properties.  Be wary,
+however, of creating a new binding without first doing some homework
+about what already exists.  There are currently two different,
+incompatible, bindings for i2c busses that came about because the new
+binding was created without first investigating how i2c devices were
+already being enumerated in existing systems.
+
+1. History
+----------
+The DT was originally created by Open Firmware as part of the
+communication method for passing data from Open Firmware to a client
+program (like to an operating system).  An operating system used the
+Device Tree to discover the topology of the hardware at runtime, and
+thereby support a majority of available hardware without hard coded
+information (assuming drivers were available for all devices).
+
+Since Open Firmware is commonly used on PowerPC and SPARC platforms,
+the Linux support for those architectures has for a long time used the
+Device Tree.
+
+In 2005, when PowerPC Linux began a major cleanup and to merge 32-bit
+and 64-bit support, the decision was made to require DT support on all
+powerpc platforms, regardless of whether or not they used Open
+Firmware.  To do this, a DT representation called the Flattened Device
+Tree (FDT) was created which could be passed to the kernel as a binary
+blob without requiring a real Open Firmware implementation.  U-Boot,
+kexec, and other bootloaders were modified to support both passing a
+Device Tree Binary (dtb) and to modify a dtb at boot time.  DT was
+also added to the PowerPC boot wrapper (``arch/powerpc/boot/*``) so that
+a dtb could be wrapped up with the kernel image to support booting
+existing non-DT aware firmware.
+
+Some time later, FDT infrastructure was generalized to be usable by
+all architectures.  At the time of this writing, 6 mainlined
+architectures (arm, microblaze, mips, powerpc, sparc, and x86) and 1
+out of mainline (nios) have some level of DT support.
+
+2. Data Model
+-------------
+If you haven't already read the Device Tree Usage\ [1]_ page,
+then go read it now.  It's okay, I'll wait....
+
+2.1 High Level View
+-------------------
+The most important thing to understand is that the DT is simply a data
+structure that describes the hardware.  There is nothing magical about
+it, and it doesn't magically make all hardware configuration problems
+go away.  What it does do is provide a language for decoupling the
+hardware configuration from the board and device driver support in the
+Linux kernel (or any other operating system for that matter).  Using
+it allows board and device support to become data driven; to make
+setup decisions based on data passed into the kernel instead of on
+per-machine hard coded selections.
+
+Ideally, data driven platform setup should result in less code
+duplication and make it easier to support a wide range of hardware
+with a single kernel image.
+
+Linux uses DT data for three major purposes:
+
+1) platform identification,
+2) runtime configuration, and
+3) device population.
+
+2.2 Platform Identification
+---------------------------
+First and foremost, the kernel will use data in the DT to identify the
+specific machine.  In a perfect world, the specific platform shouldn't
+matter to the kernel because all platform details would be described
+perfectly by the device tree in a consistent and reliable manner.
+Hardware is not perfect though, and so the kernel must identify the
+machine during early boot so that it has the opportunity to run
+machine-specific fixups.
+
+In the majority of cases, the machine identity is irrelevant, and the
+kernel will instead select setup code based on the machine's core
+CPU or SoC.  On ARM for example, setup_arch() in
+arch/arm/kernel/setup.c will call setup_machine_fdt() in
+arch/arm/kernel/devtree.c which searches through the machine_desc
+table and selects the machine_desc which best matches the device tree
+data.  It determines the best match by looking at the 'compatible'
+property in the root device tree node, and comparing it with the
+dt_compat list in struct machine_desc (which is defined in
+arch/arm/include/asm/mach/arch.h if you're curious).
+
+The 'compatible' property contains a sorted list of strings starting
+with the exact name of the machine, followed by an optional list of
+boards it is compatible with sorted from most compatible to least.  For
+example, the root compatible properties for the TI BeagleBoard and its
+successor, the BeagleBoard xM board might look like, respectively::
+
+	compatible = "ti,omap3-beagleboard", "ti,omap3450", "ti,omap3";
+	compatible = "ti,omap3-beagleboard-xm", "ti,omap3450", "ti,omap3";
+
+Where "ti,omap3-beagleboard-xm" specifies the exact model, it also
+claims that it compatible with the OMAP 3450 SoC, and the omap3 family
+of SoCs in general.  You'll notice that the list is sorted from most
+specific (exact board) to least specific (SoC family).
+
+Astute readers might point out that the Beagle xM could also claim
+compatibility with the original Beagle board.  However, one should be
+cautioned about doing so at the board level since there is typically a
+high level of change from one board to another, even within the same
+product line, and it is hard to nail down exactly what is meant when one
+board claims to be compatible with another.  For the top level, it is
+better to err on the side of caution and not claim one board is
+compatible with another.  The notable exception would be when one
+board is a carrier for another, such as a CPU module attached to a
+carrier board.
+
+One more note on compatible values.  Any string used in a compatible
+property must be documented as to what it indicates.  Add
+documentation for compatible strings in Documentation/devicetree/bindings.
+
+Again on ARM, for each machine_desc, the kernel looks to see if
+any of the dt_compat list entries appear in the compatible property.
+If one does, then that machine_desc is a candidate for driving the
+machine.  After searching the entire table of machine_descs,
+setup_machine_fdt() returns the 'most compatible' machine_desc based
+on which entry in the compatible property each machine_desc matches
+against.  If no matching machine_desc is found, then it returns NULL.
+
+The reasoning behind this scheme is the observation that in the majority
+of cases, a single machine_desc can support a large number of boards
+if they all use the same SoC, or same family of SoCs.  However,
+invariably there will be some exceptions where a specific board will
+require special setup code that is not useful in the generic case.
+Special cases could be handled by explicitly checking for the
+troublesome board(s) in generic setup code, but doing so very quickly
+becomes ugly and/or unmaintainable if it is more than just a couple of
+cases.
+
+Instead, the compatible list allows a generic machine_desc to provide
+support for a wide common set of boards by specifying "less
+compatible" values in the dt_compat list.  In the example above,
+generic board support can claim compatibility with "ti,omap3" or
+"ti,omap3450".  If a bug was discovered on the original beagleboard
+that required special workaround code during early boot, then a new
+machine_desc could be added which implements the workarounds and only
+matches on "ti,omap3-beagleboard".
+
+PowerPC uses a slightly different scheme where it calls the .probe()
+hook from each machine_desc, and the first one returning TRUE is used.
+However, this approach does not take into account the priority of the
+compatible list, and probably should be avoided for new architecture
+support.
+
+2.3 Runtime configuration
+-------------------------
+In most cases, a DT will be the sole method of communicating data from
+firmware to the kernel, so also gets used to pass in runtime and
+configuration data like the kernel parameters string and the location
+of an initrd image.
+
+Most of this data is contained in the /chosen node, and when booting
+Linux it will look something like this::
+
+	chosen {
+		bootargs = "console=ttyS0,115200 loglevel=8";
+		initrd-start = <0xc8000000>;
+		initrd-end = <0xc8200000>;
+	};
+
+The bootargs property contains the kernel arguments, and the initrd-*
+properties define the address and size of an initrd blob.  Note that
+initrd-end is the first address after the initrd image, so this doesn't
+match the usual semantic of struct resource.  The chosen node may also
+optionally contain an arbitrary number of additional properties for
+platform-specific configuration data.
+
+During early boot, the architecture setup code calls of_scan_flat_dt()
+several times with different helper callbacks to parse device tree
+data before paging is setup.  The of_scan_flat_dt() code scans through
+the device tree and uses the helpers to extract information required
+during early boot.  Typically the early_init_dt_scan_chosen() helper
+is used to parse the chosen node including kernel parameters,
+early_init_dt_scan_root() to initialize the DT address space model,
+and early_init_dt_scan_memory() to determine the size and
+location of usable RAM.
+
+On ARM, the function setup_machine_fdt() is responsible for early
+scanning of the device tree after selecting the correct machine_desc
+that supports the board.
+
+2.4 Device population
+---------------------
+After the board has been identified, and after the early configuration data
+has been parsed, then kernel initialization can proceed in the normal
+way.  At some point in this process, unflatten_device_tree() is called
+to convert the data into a more efficient runtime representation.
+This is also when machine-specific setup hooks will get called, like
+the machine_desc .init_early(), .init_irq() and .init_machine() hooks
+on ARM.  The remainder of this section uses examples from the ARM
+implementation, but all architectures will do pretty much the same
+thing when using a DT.
+
+As can be guessed by the names, .init_early() is used for any machine-
+specific setup that needs to be executed early in the boot process,
+and .init_irq() is used to set up interrupt handling.  Using a DT
+doesn't materially change the behaviour of either of these functions.
+If a DT is provided, then both .init_early() and .init_irq() are able
+to call any of the DT query functions (of_* in include/linux/of*.h) to
+get additional data about the platform.
+
+The most interesting hook in the DT context is .init_machine() which
+is primarily responsible for populating the Linux device model with
+data about the platform.  Historically this has been implemented on
+embedded platforms by defining a set of static clock structures,
+platform_devices, and other data in the board support .c file, and
+registering it en-masse in .init_machine().  When DT is used, then
+instead of hard coding static devices for each platform, the list of
+devices can be obtained by parsing the DT, and allocating device
+structures dynamically.
+
+The simplest case is when .init_machine() is only responsible for
+registering a block of platform_devices.  A platform_device is a concept
+used by Linux for memory or I/O mapped devices which cannot be detected
+by hardware, and for 'composite' or 'virtual' devices (more on those
+later).  While there is no 'platform device' terminology for the DT,
+platform devices roughly correspond to device nodes at the root of the
+tree and children of simple memory mapped bus nodes.
+
+About now is a good time to lay out an example.  Here is part of the
+device tree for the NVIDIA Tegra board::
+
+  /{
+	compatible = "nvidia,harmony", "nvidia,tegra20";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	chosen { };
+	aliases { };
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	soc {
+		compatible = "nvidia,tegra20-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		intc: interrupt-controller@50041000 {
+			compatible = "nvidia,tegra20-gic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x50041000 0x1000>, < 0x50040100 0x0100 >;
+		};
+
+		serial@70006300 {
+			compatible = "nvidia,tegra20-uart";
+			reg = <0x70006300 0x100>;
+			interrupts = <122>;
+		};
+
+		i2s1: i2s@70002800 {
+			compatible = "nvidia,tegra20-i2s";
+			reg = <0x70002800 0x100>;
+			interrupts = <77>;
+			codec = <&wm8903>;
+		};
+
+		i2c@7000c000 {
+			compatible = "nvidia,tegra20-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7000c000 0x100>;
+			interrupts = <70>;
+
+			wm8903: codec@1a {
+				compatible = "wlf,wm8903";
+				reg = <0x1a>;
+				interrupts = <347>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "nvidia,harmony-sound";
+		i2s-controller = <&i2s1>;
+		i2s-codec = <&wm8903>;
+	};
+  };
+
+At .init_machine() time, Tegra board support code will need to look at
+this DT and decide which nodes to create platform_devices for.
+However, looking at the tree, it is not immediately obvious what kind
+of device each node represents, or even if a node represents a device
+at all.  The /chosen, /aliases, and /memory nodes are informational
+nodes that don't describe devices (although arguably memory could be
+considered a device).  The children of the /soc node are memory mapped
+devices, but the codec@1a is an i2c device, and the sound node
+represents not a device, but rather how other devices are connected
+together to create the audio subsystem.  I know what each device is
+because I'm familiar with the board design, but how does the kernel
+know what to do with each node?
+
+The trick is that the kernel starts at the root of the tree and looks
+for nodes that have a 'compatible' property.  First, it is generally
+assumed that any node with a 'compatible' property represents a device
+of some kind, and second, it can be assumed that any node at the root
+of the tree is either directly attached to the processor bus, or is a
+miscellaneous system device that cannot be described any other way.
+For each of these nodes, Linux allocates and registers a
+platform_device, which in turn may get bound to a platform_driver.
+
+Why is using a platform_device for these nodes a safe assumption?
+Well, for the way that Linux models devices, just about all bus_types
+assume that its devices are children of a bus controller.  For
+example, each i2c_client is a child of an i2c_master.  Each spi_device
+is a child of an SPI bus.  Similarly for USB, PCI, MDIO, etc.  The
+same hierarchy is also found in the DT, where I2C device nodes only
+ever appear as children of an I2C bus node.  Ditto for SPI, MDIO, USB,
+etc.  The only devices which do not require a specific type of parent
+device are platform_devices (and amba_devices, but more on that
+later), which will happily live at the base of the Linux /sys/devices
+tree.  Therefore, if a DT node is at the root of the tree, then it
+really probably is best registered as a platform_device.
+
+Linux board support code calls of_platform_populate(NULL, NULL, NULL, NULL)
+to kick off discovery of devices at the root of the tree.  The
+parameters are all NULL because when starting from the root of the
+tree, there is no need to provide a starting node (the first NULL), a
+parent struct device (the last NULL), and we're not using a match
+table (yet).  For a board that only needs to register devices,
+.init_machine() can be completely empty except for the
+of_platform_populate() call.
+
+In the Tegra example, this accounts for the /soc and /sound nodes, but
+what about the children of the SoC node?  Shouldn't they be registered
+as platform devices too?  For Linux DT support, the generic behaviour
+is for child devices to be registered by the parent's device driver at
+driver .probe() time.  So, an i2c bus device driver will register a
+i2c_client for each child node, an SPI bus driver will register
+its spi_device children, and similarly for other bus_types.
+According to that model, a driver could be written that binds to the
+SoC node and simply registers platform_devices for each of its
+children.  The board support code would allocate and register an SoC
+device, a (theoretical) SoC device driver could bind to the SoC device,
+and register platform_devices for /soc/interrupt-controller, /soc/serial,
+/soc/i2s, and /soc/i2c in its .probe() hook.  Easy, right?
+
+Actually, it turns out that registering children of some
+platform_devices as more platform_devices is a common pattern, and the
+device tree support code reflects that and makes the above example
+simpler.  The second argument to of_platform_populate() is an
+of_device_id table, and any node that matches an entry in that table
+will also get its child nodes registered.  In the Tegra case, the code
+can look something like this::
+
+  static void __init harmony_init_machine(void)
+  {
+	/* ... */
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+  }
+
+"simple-bus" is defined in the Devicetree Specification as a property
+meaning a simple memory mapped bus, so the of_platform_populate() code
+could be written to just assume simple-bus compatible nodes will
+always be traversed.  However, we pass it in as an argument so that
+board support code can always override the default behaviour.
+
+[Need to add discussion of adding i2c/spi/etc child devices]
+
+Appendix A: AMBA devices
+------------------------
+
+ARM Primecells are a certain kind of device attached to the ARM AMBA
+bus which include some support for hardware detection and power
+management.  In Linux, struct amba_device and the amba_bus_type is
+used to represent Primecell devices.  However, the fiddly bit is that
+not all devices on an AMBA bus are Primecells, and for Linux it is
+typical for both amba_device and platform_device instances to be
+siblings of the same bus segment.
+
+When using the DT, this creates problems for of_platform_populate()
+because it must decide whether to register each node as either a
+platform_device or an amba_device.  This unfortunately complicates the
+device creation model a little bit, but the solution turns out not to
+be too invasive.  If a node is compatible with "arm,amba-primecell", then
+of_platform_populate() will register it as an amba_device instead of a
+platform_device.
diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.txt
deleted file mode 100644
index 33a8aaac02a8..000000000000
--- a/Documentation/devicetree/usage-model.txt
+++ /dev/null
@@ -1,415 +0,0 @@
-Linux and the Device Tree
--------------------------
-The Linux usage model for device tree data
-
-Author: Grant Likely <grant.likely@secretlab.ca>
-
-This article describes how Linux uses the device tree.  An overview of
-the device tree data format can be found on the device tree usage page
-at devicetree.org[1].
-
-[1] http://devicetree.org/Device_Tree_Usage
-
-The "Open Firmware Device Tree", or simply Device Tree (DT), is a data
-structure and language for describing hardware.  More specifically, it
-is a description of hardware that is readable by an operating system
-so that the operating system doesn't need to hard code details of the
-machine.
-
-Structurally, the DT is a tree, or acyclic graph with named nodes, and
-nodes may have an arbitrary number of named properties encapsulating
-arbitrary data.  A mechanism also exists to create arbitrary
-links from one node to another outside of the natural tree structure.
-
-Conceptually, a common set of usage conventions, called 'bindings',
-is defined for how data should appear in the tree to describe typical
-hardware characteristics including data busses, interrupt lines, GPIO
-connections, and peripheral devices.
-
-As much as possible, hardware is described using existing bindings to
-maximize use of existing support code, but since property and node
-names are simply text strings, it is easy to extend existing bindings
-or create new ones by defining new nodes and properties.  Be wary,
-however, of creating a new binding without first doing some homework
-about what already exists.  There are currently two different,
-incompatible, bindings for i2c busses that came about because the new
-binding was created without first investigating how i2c devices were
-already being enumerated in existing systems.
-
-1. History
-----------
-The DT was originally created by Open Firmware as part of the
-communication method for passing data from Open Firmware to a client
-program (like to an operating system).  An operating system used the
-Device Tree to discover the topology of the hardware at runtime, and
-thereby support a majority of available hardware without hard coded
-information (assuming drivers were available for all devices).
-
-Since Open Firmware is commonly used on PowerPC and SPARC platforms,
-the Linux support for those architectures has for a long time used the
-Device Tree.
-
-In 2005, when PowerPC Linux began a major cleanup and to merge 32-bit
-and 64-bit support, the decision was made to require DT support on all
-powerpc platforms, regardless of whether or not they used Open
-Firmware.  To do this, a DT representation called the Flattened Device
-Tree (FDT) was created which could be passed to the kernel as a binary
-blob without requiring a real Open Firmware implementation.  U-Boot,
-kexec, and other bootloaders were modified to support both passing a
-Device Tree Binary (dtb) and to modify a dtb at boot time.  DT was
-also added to the PowerPC boot wrapper (arch/powerpc/boot/*) so that
-a dtb could be wrapped up with the kernel image to support booting
-existing non-DT aware firmware.
-
-Some time later, FDT infrastructure was generalized to be usable by
-all architectures.  At the time of this writing, 6 mainlined
-architectures (arm, microblaze, mips, powerpc, sparc, and x86) and 1
-out of mainline (nios) have some level of DT support.
-
-2. Data Model
--------------
-If you haven't already read the Device Tree Usage[1] page,
-then go read it now.  It's okay, I'll wait....
-
-2.1 High Level View
--------------------
-The most important thing to understand is that the DT is simply a data
-structure that describes the hardware.  There is nothing magical about
-it, and it doesn't magically make all hardware configuration problems
-go away.  What it does do is provide a language for decoupling the
-hardware configuration from the board and device driver support in the
-Linux kernel (or any other operating system for that matter).  Using
-it allows board and device support to become data driven; to make
-setup decisions based on data passed into the kernel instead of on
-per-machine hard coded selections.
-
-Ideally, data driven platform setup should result in less code
-duplication and make it easier to support a wide range of hardware
-with a single kernel image.
-
-Linux uses DT data for three major purposes:
-1) platform identification,
-2) runtime configuration, and
-3) device population.
-
-2.2 Platform Identification
----------------------------
-First and foremost, the kernel will use data in the DT to identify the
-specific machine.  In a perfect world, the specific platform shouldn't
-matter to the kernel because all platform details would be described
-perfectly by the device tree in a consistent and reliable manner.
-Hardware is not perfect though, and so the kernel must identify the
-machine during early boot so that it has the opportunity to run
-machine-specific fixups.
-
-In the majority of cases, the machine identity is irrelevant, and the
-kernel will instead select setup code based on the machine's core
-CPU or SoC.  On ARM for example, setup_arch() in
-arch/arm/kernel/setup.c will call setup_machine_fdt() in
-arch/arm/kernel/devtree.c which searches through the machine_desc
-table and selects the machine_desc which best matches the device tree
-data.  It determines the best match by looking at the 'compatible'
-property in the root device tree node, and comparing it with the
-dt_compat list in struct machine_desc (which is defined in
-arch/arm/include/asm/mach/arch.h if you're curious).
-
-The 'compatible' property contains a sorted list of strings starting
-with the exact name of the machine, followed by an optional list of
-boards it is compatible with sorted from most compatible to least.  For
-example, the root compatible properties for the TI BeagleBoard and its
-successor, the BeagleBoard xM board might look like, respectively:
-
-	compatible = "ti,omap3-beagleboard", "ti,omap3450", "ti,omap3";
-	compatible = "ti,omap3-beagleboard-xm", "ti,omap3450", "ti,omap3";
-
-Where "ti,omap3-beagleboard-xm" specifies the exact model, it also
-claims that it compatible with the OMAP 3450 SoC, and the omap3 family
-of SoCs in general.  You'll notice that the list is sorted from most
-specific (exact board) to least specific (SoC family).
-
-Astute readers might point out that the Beagle xM could also claim
-compatibility with the original Beagle board.  However, one should be
-cautioned about doing so at the board level since there is typically a
-high level of change from one board to another, even within the same
-product line, and it is hard to nail down exactly what is meant when one
-board claims to be compatible with another.  For the top level, it is
-better to err on the side of caution and not claim one board is
-compatible with another.  The notable exception would be when one
-board is a carrier for another, such as a CPU module attached to a
-carrier board.
-
-One more note on compatible values.  Any string used in a compatible
-property must be documented as to what it indicates.  Add
-documentation for compatible strings in Documentation/devicetree/bindings.
-
-Again on ARM, for each machine_desc, the kernel looks to see if
-any of the dt_compat list entries appear in the compatible property.
-If one does, then that machine_desc is a candidate for driving the
-machine.  After searching the entire table of machine_descs,
-setup_machine_fdt() returns the 'most compatible' machine_desc based
-on which entry in the compatible property each machine_desc matches
-against.  If no matching machine_desc is found, then it returns NULL.
-
-The reasoning behind this scheme is the observation that in the majority
-of cases, a single machine_desc can support a large number of boards
-if they all use the same SoC, or same family of SoCs.  However,
-invariably there will be some exceptions where a specific board will
-require special setup code that is not useful in the generic case.
-Special cases could be handled by explicitly checking for the
-troublesome board(s) in generic setup code, but doing so very quickly
-becomes ugly and/or unmaintainable if it is more than just a couple of
-cases.
-
-Instead, the compatible list allows a generic machine_desc to provide
-support for a wide common set of boards by specifying "less
-compatible" values in the dt_compat list.  In the example above,
-generic board support can claim compatibility with "ti,omap3" or
-"ti,omap3450".  If a bug was discovered on the original beagleboard
-that required special workaround code during early boot, then a new
-machine_desc could be added which implements the workarounds and only
-matches on "ti,omap3-beagleboard".
-
-PowerPC uses a slightly different scheme where it calls the .probe()
-hook from each machine_desc, and the first one returning TRUE is used.
-However, this approach does not take into account the priority of the
-compatible list, and probably should be avoided for new architecture
-support.
-
-2.3 Runtime configuration
--------------------------
-In most cases, a DT will be the sole method of communicating data from
-firmware to the kernel, so also gets used to pass in runtime and
-configuration data like the kernel parameters string and the location
-of an initrd image.
-
-Most of this data is contained in the /chosen node, and when booting
-Linux it will look something like this:
-
-	chosen {
-		bootargs = "console=ttyS0,115200 loglevel=8";
-		initrd-start = <0xc8000000>;
-		initrd-end = <0xc8200000>;
-	};
-
-The bootargs property contains the kernel arguments, and the initrd-*
-properties define the address and size of an initrd blob.  Note that
-initrd-end is the first address after the initrd image, so this doesn't
-match the usual semantic of struct resource.  The chosen node may also
-optionally contain an arbitrary number of additional properties for
-platform-specific configuration data.
-
-During early boot, the architecture setup code calls of_scan_flat_dt()
-several times with different helper callbacks to parse device tree
-data before paging is setup.  The of_scan_flat_dt() code scans through
-the device tree and uses the helpers to extract information required
-during early boot.  Typically the early_init_dt_scan_chosen() helper
-is used to parse the chosen node including kernel parameters,
-early_init_dt_scan_root() to initialize the DT address space model,
-and early_init_dt_scan_memory() to determine the size and
-location of usable RAM.
-
-On ARM, the function setup_machine_fdt() is responsible for early
-scanning of the device tree after selecting the correct machine_desc
-that supports the board.
-
-2.4 Device population
----------------------
-After the board has been identified, and after the early configuration data
-has been parsed, then kernel initialization can proceed in the normal
-way.  At some point in this process, unflatten_device_tree() is called
-to convert the data into a more efficient runtime representation.
-This is also when machine-specific setup hooks will get called, like
-the machine_desc .init_early(), .init_irq() and .init_machine() hooks
-on ARM.  The remainder of this section uses examples from the ARM
-implementation, but all architectures will do pretty much the same
-thing when using a DT.
-
-As can be guessed by the names, .init_early() is used for any machine-
-specific setup that needs to be executed early in the boot process,
-and .init_irq() is used to set up interrupt handling.  Using a DT
-doesn't materially change the behaviour of either of these functions.
-If a DT is provided, then both .init_early() and .init_irq() are able
-to call any of the DT query functions (of_* in include/linux/of*.h) to
-get additional data about the platform.
-
-The most interesting hook in the DT context is .init_machine() which
-is primarily responsible for populating the Linux device model with
-data about the platform.  Historically this has been implemented on
-embedded platforms by defining a set of static clock structures,
-platform_devices, and other data in the board support .c file, and
-registering it en-masse in .init_machine().  When DT is used, then
-instead of hard coding static devices for each platform, the list of
-devices can be obtained by parsing the DT, and allocating device
-structures dynamically.
-
-The simplest case is when .init_machine() is only responsible for
-registering a block of platform_devices.  A platform_device is a concept
-used by Linux for memory or I/O mapped devices which cannot be detected
-by hardware, and for 'composite' or 'virtual' devices (more on those
-later).  While there is no 'platform device' terminology for the DT,
-platform devices roughly correspond to device nodes at the root of the
-tree and children of simple memory mapped bus nodes.
-
-About now is a good time to lay out an example.  Here is part of the
-device tree for the NVIDIA Tegra board.
-
-/{
-	compatible = "nvidia,harmony", "nvidia,tegra20";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	chosen { };
-	aliases { };
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	soc {
-		compatible = "nvidia,tegra20-soc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		intc: interrupt-controller@50041000 {
-			compatible = "nvidia,tegra20-gic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x50041000 0x1000>, < 0x50040100 0x0100 >;
-		};
-
-		serial@70006300 {
-			compatible = "nvidia,tegra20-uart";
-			reg = <0x70006300 0x100>;
-			interrupts = <122>;
-		};
-
-		i2s1: i2s@70002800 {
-			compatible = "nvidia,tegra20-i2s";
-			reg = <0x70002800 0x100>;
-			interrupts = <77>;
-			codec = <&wm8903>;
-		};
-
-		i2c@7000c000 {
-			compatible = "nvidia,tegra20-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x7000c000 0x100>;
-			interrupts = <70>;
-
-			wm8903: codec@1a {
-				compatible = "wlf,wm8903";
-				reg = <0x1a>;
-				interrupts = <347>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "nvidia,harmony-sound";
-		i2s-controller = <&i2s1>;
-		i2s-codec = <&wm8903>;
-	};
-};
-
-At .init_machine() time, Tegra board support code will need to look at
-this DT and decide which nodes to create platform_devices for.
-However, looking at the tree, it is not immediately obvious what kind
-of device each node represents, or even if a node represents a device
-at all.  The /chosen, /aliases, and /memory nodes are informational
-nodes that don't describe devices (although arguably memory could be
-considered a device).  The children of the /soc node are memory mapped
-devices, but the codec@1a is an i2c device, and the sound node
-represents not a device, but rather how other devices are connected
-together to create the audio subsystem.  I know what each device is
-because I'm familiar with the board design, but how does the kernel
-know what to do with each node?
-
-The trick is that the kernel starts at the root of the tree and looks
-for nodes that have a 'compatible' property.  First, it is generally
-assumed that any node with a 'compatible' property represents a device
-of some kind, and second, it can be assumed that any node at the root
-of the tree is either directly attached to the processor bus, or is a
-miscellaneous system device that cannot be described any other way.
-For each of these nodes, Linux allocates and registers a
-platform_device, which in turn may get bound to a platform_driver.
-
-Why is using a platform_device for these nodes a safe assumption?
-Well, for the way that Linux models devices, just about all bus_types
-assume that its devices are children of a bus controller.  For
-example, each i2c_client is a child of an i2c_master.  Each spi_device
-is a child of an SPI bus.  Similarly for USB, PCI, MDIO, etc.  The
-same hierarchy is also found in the DT, where I2C device nodes only
-ever appear as children of an I2C bus node.  Ditto for SPI, MDIO, USB,
-etc.  The only devices which do not require a specific type of parent
-device are platform_devices (and amba_devices, but more on that
-later), which will happily live at the base of the Linux /sys/devices
-tree.  Therefore, if a DT node is at the root of the tree, then it
-really probably is best registered as a platform_device.
-
-Linux board support code calls of_platform_populate(NULL, NULL, NULL, NULL)
-to kick off discovery of devices at the root of the tree.  The
-parameters are all NULL because when starting from the root of the
-tree, there is no need to provide a starting node (the first NULL), a
-parent struct device (the last NULL), and we're not using a match
-table (yet).  For a board that only needs to register devices,
-.init_machine() can be completely empty except for the
-of_platform_populate() call.
-
-In the Tegra example, this accounts for the /soc and /sound nodes, but
-what about the children of the SoC node?  Shouldn't they be registered
-as platform devices too?  For Linux DT support, the generic behaviour
-is for child devices to be registered by the parent's device driver at
-driver .probe() time.  So, an i2c bus device driver will register a
-i2c_client for each child node, an SPI bus driver will register
-its spi_device children, and similarly for other bus_types.
-According to that model, a driver could be written that binds to the
-SoC node and simply registers platform_devices for each of its
-children.  The board support code would allocate and register an SoC
-device, a (theoretical) SoC device driver could bind to the SoC device,
-and register platform_devices for /soc/interrupt-controller, /soc/serial,
-/soc/i2s, and /soc/i2c in its .probe() hook.  Easy, right?
-
-Actually, it turns out that registering children of some
-platform_devices as more platform_devices is a common pattern, and the
-device tree support code reflects that and makes the above example
-simpler.  The second argument to of_platform_populate() is an
-of_device_id table, and any node that matches an entry in that table
-will also get its child nodes registered.  In the Tegra case, the code
-can look something like this:
-
-static void __init harmony_init_machine(void)
-{
-	/* ... */
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-"simple-bus" is defined in the Devicetree Specification as a property
-meaning a simple memory mapped bus, so the of_platform_populate() code
-could be written to just assume simple-bus compatible nodes will
-always be traversed.  However, we pass it in as an argument so that
-board support code can always override the default behaviour.
-
-[Need to add discussion of adding i2c/spi/etc child devices]
-
-Appendix A: AMBA devices
-------------------------
-
-ARM Primecells are a certain kind of device attached to the ARM AMBA
-bus which include some support for hardware detection and power
-management.  In Linux, struct amba_device and the amba_bus_type is
-used to represent Primecell devices.  However, the fiddly bit is that
-not all devices on an AMBA bus are Primecells, and for Linux it is
-typical for both amba_device and platform_device instances to be
-siblings of the same bus segment.
-
-When using the DT, this creates problems for of_platform_populate()
-because it must decide whether to register each node as either a
-platform_device or an amba_device.  This unfortunately complicates the
-device creation model a little bit, but the solution turns out not to
-be too invasive.  If a node is compatible with "arm,amba-primecell", then
-of_platform_populate() will register it as an amba_device instead of a
-platform_device.
diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst
deleted file mode 100644
index 7635ab230456..000000000000
--- a/Documentation/devicetree/writing-schema.rst
+++ /dev/null
@@ -1,165 +0,0 @@
-:orphan:
-
-Writing DeviceTree Bindings in json-schema
-==========================================
-
-Devicetree bindings are written using json-schema vocabulary. Schema files are
-written in a JSON compatible subset of YAML. YAML is used instead of JSON as it
-considered more human readable and has some advantages such as allowing
-comments (Prefixed with '#').
-
-Schema Contents
----------------
-
-Each schema doc is a structured json-schema which is defined by a set of
-top-level properties. Generally, there is one binding defined per file. The
-top-level json-schema properties used are:
-
-$id
-  A json-schema unique identifier string. The string must be a valid
-  URI typically containing the binding's filename and path. For DT schema, it must
-  begin with "http://devicetree.org/schemas/". The URL is used in constructing
-  references to other files specified in schema "$ref" properties. A $ref values
-  with a leading '/' will have the hostname prepended. A $ref value a relative
-  path or filename only will be prepended with the hostname and path components
-  of the current schema file's '$id' value. A URL is used even for local files,
-  but there may not actually be files present at those locations.
-
-$schema
-  Indicates the meta-schema the schema file adheres to.
-
-title
-  A one line description on the contents of the binding schema.
-
-maintainers
-  A DT specific property. Contains a list of email address(es)
-  for maintainers of this binding.
-
-description
-  Optional. A multi-line text block containing any detailed
-  information about this binding. It should contain things such as what the block
-  or device does, standards the device conforms to, and links to datasheets for
-  more information.
-
-select
-  Optional. A json-schema used to match nodes for applying the
-  schema. By default without 'select', nodes are matched against their possible
-  compatible string values or node name. Most bindings should not need select.
-
- allOf
-  Optional. A list of other schemas to include. This is used to
-  include other schemas the binding conforms to. This may be schemas for a
-  particular class of devices such as I2C or SPI controllers.
-
- properties
-  A set of sub-schema defining all the DT properties for the
-  binding. The exact schema syntax depends on whether properties are known,
-  common properties (e.g. 'interrupts') or are binding/vendor specific properties.
-
-A property can also define a child DT node with child properties defined
-under it.
-
-For more details on properties sections, see 'Property Schema' section.
-
-patternProperties
-  Optional. Similar to 'properties', but names are regex.
-
-required
-  A list of DT properties from the 'properties' section that
-  must always be present.
-
-examples
-  Optional. A list of one or more DTS hunks implementing the
-  binding. Note: YAML doesn't allow leading tabs, so spaces must be used instead.
-
-Unless noted otherwise, all properties are required.
-
-Property Schema
----------------
-
-The 'properties' section of the schema contains all the DT properties for a
-binding. Each property contains a set of constraints using json-schema
-vocabulary for that property. The properties schemas are what is used for
-validation of DT files.
-
-For common properties, only additional constraints not covered by the common
-binding schema need to be defined such as how many values are valid or what
-possible values are valid.
-
-Vendor specific properties will typically need more detailed schema. With the
-exception of boolean properties, they should have a reference to a type in
-schemas/types.yaml. A "description" property is always required.
-
-The Devicetree schemas don't exactly match the YAML encoded DT data produced by
-dtc. They are simplified to make them more compact and avoid a bunch of
-boilerplate. The tools process the schema files to produce the final schema for
-validation. There are currently 2 transformations the tools perform.
-
-The default for arrays in json-schema is they are variable sized and allow more
-entries than explicitly defined. This can be restricted by defining 'minItems',
-'maxItems', and 'additionalItems'. However, for DeviceTree Schemas, a fixed
-size is desired in most cases, so these properties are added based on the
-number of entries in an 'items' list.
-
-The YAML Devicetree format also makes all string values an array and scalar
-values a matrix (in order to define groupings) even when only a single value
-is present. Single entries in schemas are fixed up to match this encoding.
-
-Testing
--------
-
-Dependencies
-~~~~~~~~~~~~
-
-The DT schema project must be installed in order to validate the DT schema
-binding documents and validate DTS files using the DT schema. The DT schema
-project can be installed with pip::
-
-    pip3 install git+https://github.com/devicetree-org/dt-schema.git@master
-
-Several executables (dt-doc-validate, dt-mk-schema, dt-validate) will be
-installed. Ensure they are in your PATH (~/.local/bin by default).
-
-dtc must also be built with YAML output support enabled. This requires that
-libyaml and its headers be installed on the host system. For some distributions
-that involves installing the development package, such as:
-
-Debian:
-  apt-get install libyaml-dev
-Fedora:
-  dnf -y install libyaml-devel
-
-Running checks
-~~~~~~~~~~~~~~
-
-The DT schema binding documents must be validated using the meta-schema (the
-schema for the schema) to ensure they are both valid json-schema and valid
-binding schema. All of the DT binding documents can be validated using the
-``dt_binding_check`` target::
-
-    make dt_binding_check
-
-In order to perform validation of DT source files, use the ``dtbs_check`` target::
-
-    make dtbs_check
-
-Note that ``dtbs_check`` will skip any binding schema files with errors. It is
-necessary to use ``dt_binding_check`` to get all the validation errors in the
-binding schema files.
-
-It is also possible to run checks with a single schema file by setting the
-``DT_SCHEMA_FILES`` variable to a specific schema file.
-
-::
-
-    make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml
-    make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml
-
-
-json-schema Resources
----------------------
-
-
-`JSON-Schema Specifications <http://json-schema.org/>`_
-
-`Using JSON Schema Book <http://usingjsonschema.com/>`_